Merge branch 'master' into for-next

Conflicts:
	arch/arm/mach-omap1/board-nokia770.c

3773 files changed, 257115 insertions, 224001 deletions

diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace
deleted file mode 100644
index 5e6a92a02d8..00000000000
--- a/Documentation/ABI/testing/debugfs-kmemtrace
+++ /dev/null
@@ -1,71 +0,0 @@
-What:		/sys/kernel/debug/kmemtrace/
-Date:		July 2008
-Contact:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
-Description:
-
-In kmemtrace-enabled kernels, the following files are created:
-
-/sys/kernel/debug/kmemtrace/
-	cpu<n>		(0400)	Per-CPU tracing data, see below. (binary)
-	total_overruns	(0400)	Total number of bytes which were dropped from
-				cpu<n> files because of full buffer condition,
-				non-binary. (text)
-	abi_version	(0400)	Kernel's kmemtrace ABI version. (text)
-
-Each per-CPU file should be read according to the relay interface. That is,
-the reader should set affinity to that specific CPU and, as currently done by
-the userspace application (though there are other methods), use poll() with
-an infinite timeout before every read(). Otherwise, erroneous data may be
-read. The binary data has the following _core_ format:
-
-	Event ID	(1 byte)	Unsigned integer, one of:
-		0 - represents an allocation (KMEMTRACE_EVENT_ALLOC)
-		1 - represents a freeing of previously allocated memory
-		    (KMEMTRACE_EVENT_FREE)
-	Type ID		(1 byte)	Unsigned integer, one of:
-		0 - this is a kmalloc() / kfree()
-		1 - this is a kmem_cache_alloc() / kmem_cache_free()
-		2 - this is a __get_free_pages() et al.
-	Event size	(2 bytes)	Unsigned integer representing the
-					size of this event. Used to extend
-					kmemtrace. Discard the bytes you
-					don't know about.
-	Sequence number	(4 bytes)	Signed integer used to reorder data
-					logged on SMP machines. Wraparound
-					must be taken into account, although
-					it is unlikely.
-	Caller address	(8 bytes)	Return address to the caller.
-	Pointer to mem	(8 bytes)	Pointer to target memory area. Can be
-					NULL, but not all such calls might be
-					recorded.
-
-In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow:
-
-	Requested bytes	(8 bytes)	Total number of requested bytes,
-					unsigned, must not be zero.
-	Allocated bytes (8 bytes)	Total number of actually allocated
-					bytes, unsigned, must not be lower
-					than requested bytes.
-	Requested flags	(4 bytes)	GFP flags supplied by the caller.
-	Target CPU	(4 bytes)	Signed integer, valid for event id 1.
-					If equal to -1, target CPU is the same
-					as origin CPU, but the reverse might
-					not be true.
-
-The data is made available in the same endianness the machine has.
-
-Other event ids and type ids may be defined and added. Other fields may be
-added by increasing event size, but see below for details.
-Every modification to the ABI, including new id definitions, are followed
-by bumping the ABI version by one.
-
-Adding new data to the packet (features) is done at the end of the mandatory
-data:
-	Feature size	(2 byte)
-	Feature ID	(1 byte)
-	Feature data	(Feature size - 3 bytes)
-
-
-Users:
-	kmemtrace-user - git://repo.or.cz/kmemtrace-user.git
-
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
new file mode 100644
index 00000000000..feb2e4a8707
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
@@ -0,0 +1,21 @@
+Where:		/sys/bus/i2c/devices/.../heading0_input
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Reports the current heading from the compass as a floating
+		point value in degrees.
+
+Where:		/sys/bus/i2c/devices/.../power_state
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the power state of the device. 0 sets the device into
+		sleep mode, 1 wakes it up.
+
+Where:		/sys/bus/i2c/devices/.../calibration
+Date:		April 2010
+Kernel Version: 2.6.36?
+Contact:	alan.cox@intel.com
+Description:	Sets the calibration on or off (1 = on, 0 = off). See the
+		chip data sheet.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 25be3250f7d..f979d825d11 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -139,3 +139,30 @@ Contact:	linux-pci@vger.kernel.org
 Description:
 		This symbolic link points to the PCI hotplug controller driver
 		module that manages the hotplug slot.
+
+What:		/sys/bus/pci/devices/.../label
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given name(SMBIOS type 41 string) of the PCI device.
+		The attribute will be created only if the firmware
+		has given a name to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned name of the PCI device.
+
+What:		/sys/bus/pci/devices/.../index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance(SMBIOS type 41 device type instance)
+		of the PCI device. The attribute will be created
+		only if the firmware has given a device type instance
+		to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned device type instance of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
diff --git a/Documentation/ABI/testing/sysfs-i2c-bmp085 b/Documentation/ABI/testing/sysfs-i2c-bmp085
new file mode 100644
index 00000000000..585962ad046
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-i2c-bmp085
@@ -0,0 +1,31 @@
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/pressure0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Start a pressure measurement and read the result. Values
+		represent the ambient air pressure in pascal (0.01 millibar).
+
+		Reading: returns the current air pressure.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/temp0_input
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Measure the ambient temperature. The returned value represents
+		the ambient temperature in units of 0.1 degree celsius.
+
+		Reading: returns the current temperature.
+
+
+What:		/sys/bus/i2c/devices/<busnum>-<devaddr>/oversampling
+Date:		June 2010
+Contact:	Christoph Mair <christoph.mair@gmail.com>
+Description:	Tell the bmp085 to use more samples to calculate a pressure
+		value. When writing to this file the chip will use 2^x samples
+		to calculate the next pressure value with x being the value
+		written. Using this feature will decrease RMS noise and
+		increase the measurement time.
+
+		Reading: returns the current oversampling setting.
+
+		Writing: sets a new oversampling setting.
+		Accepted values: 0..3.
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 1b2dd4fc3db..ecd35e9d441 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -111,6 +111,7 @@ X!Edrivers/base/attribute_container.c
 <!--
 X!Edrivers/base/interface.c
 -->
+!Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
      </sect1>
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 55f12ac37ac..490d862c5f0 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -199,10 +199,33 @@
    may be configured as a kernel built-in or a kernel loadable module.
    You can only make use of <constant>kgdbwait</constant> and early
    debugging if you build kgdboc into the kernel as a built-in.
+   <para>Optionally you can elect to activate kms (Kernel Mode
+   Setting) integration.  When you use kms with kgdboc and you have a
+   video driver that has atomic mode setting hooks, it is possible to
+   enter the debugger on the graphics console.  When the kernel
+   execution is resumed, the previous graphics mode will be restored.
+   This integration can serve as a useful tool to aid in diagnosing
+   crashes or doing analysis of memory with kdb while allowing the
+   full graphics console applications to run.
+   </para>
    </para>
    <sect2 id="kgdbocArgs">
    <title>kgdboc arguments</title>
-   <para>Usage: <constant>kgdboc=[kbd][[,]serial_device][,baud]</constant></para>
+   <para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
+   <para>The order listed above must be observed if you use any of the
+   optional configurations together.
+   </para>
+   <para>Abbreviations:
+   <itemizedlist>
+   <listitem><para>kms = Kernel Mode Setting</para></listitem>
+   <listitem><para>kbd = Keyboard</para></listitem>
+   </itemizedlist>
+   </para>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.  The order listed above must be observed if
+   you use any of the optional configurations together.  Using kms +
+   only gdb is generally not a useful combination.</para>
    <sect3 id="kgdbocArgs1">
    <title>Using loadable module or built-in</title>
    <para>
@@ -212,7 +235,7 @@
    <listitem>
    <para>As a kernel loadable module:</para>
    <para>Use the command: <constant>modprobe kgdboc kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
-   <para>Here are two examples of how you might formate the kgdboc
+   <para>Here are two examples of how you might format the kgdboc
    string. The first is for an x86 target using the first serial port.
    The second example is for the ARM Versatile AB using the second
    serial port.
@@ -240,6 +263,9 @@
    </sect3>
    <sect3 id="kgdbocArgs3">
    <title>More examples</title>
+   <para>You can configure kgdboc to use the keyboard, and or a serial
+   device depending on if you are using kdb and or kgdb, in one of the
+   following scenarios.</para>
    <para>You can configure kgdboc to use the keyboard, and or a serial device
    depending on if you are using kdb and or kgdb, in one of the
    following scenarios.
@@ -255,6 +281,12 @@
    <listitem><para>kdb with a keyboard</para>
    <para><constant>kgdboc=kbd</constant></para>
    </listitem>
+   <listitem><para>kdb with kernel mode setting</para>
+   <para><constant>kgdboc=kms,kbd</constant></para>
+   </listitem>
+   <listitem><para>kdb with kernel mode setting and kgdb over a serial port</para>
+   <para><constant>kgdboc=kms,kbd,ttyS0,115200</constant></para>
+   </listitem>
    </orderedlist>
    </para>
    </sect3>
@@ -637,6 +669,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
       <listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
       <listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
       <listitem><para>The API to invoke either the kdb or kgdb frontend to the debug core.</para></listitem>
+      <listitem><para>The structures and callback API for atomic kernel mode setting.</para>
+      <para>NOTE: kgdboc is where the kms callbacks are invoked.</para></listitem>
       </itemizedlist>
       </para>
       </listitem>
@@ -747,6 +781,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   </sect1>
   <sect1 id="kgdbocDesign">
   <title>kgdboc internals</title>
+  <sect2>
+  <title>kgdboc and uarts</title>
   <para>
   The kgdboc driver is actually a very thin driver that relies on the
   underlying low level to the hardware driver having "polling hooks"
@@ -754,11 +790,8 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   implementation of kgdboc it the serial_core was changed to expose a
   low level UART hook for doing polled mode reading and writing of a
   single character while in an atomic context.  When kgdb makes an I/O
-  request to the debugger, kgdboc invokes a call back in the serial
-  core which in turn uses the call back in the UART driver.  It is
-  certainly possible to extend kgdboc to work with non-UART based
-  consoles in the future.
-  </para>
+  request to the debugger, kgdboc invokes a callback in the serial
+  core which in turn uses the callback in the UART driver.</para>
   <para>
   When using kgdboc with a UART, the UART driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
 #ifdef CONFIG_CONSOLE_POLL
@@ -772,9 +805,68 @@ Task Addr       Pid   Parent [*] cpu State Thread     Command
   that they can be called from an atomic context and have to restore
   the state of the UART chip on return such that the system can return
   to normal when the debugger detaches.  You need to be very careful
-  with any kind of lock you consider, because failing here is most
+  with any kind of lock you consider, because failing here is most likely
   going to mean pressing the reset button.
   </para>
+  </sect2>
+  <sect2 id="kgdbocKbd">
+  <title>kgdboc and keyboards</title>
+  <para>The kgdboc driver contains logic to configure communications
+  with an attached keyboard.  The keyboard infrastructure is only
+  compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the
+  kernel configuration.</para>
+  <para>The core polled keyboard driver driver for PS/2 type keyboards
+  is in drivers/char/kdb_keyboard.c.  This driver is hooked into the
+  debug core when kgdboc populates the callback in the array
+  called <constant>kdb_poll_funcs[]</constant>.  The
+  kdb_get_kbd_char() is the top-level function which polls hardware
+  for single character input.
+  </para>
+  </sect2>
+  <sect2 id="kgdbocKms">
+  <title>kgdboc and kms</title>
+  <para>The kgdboc driver contains logic to request the graphics
+  display to switch to a text context when you are using
+  "kgdboc=kms,kbd", provided that you have a video driver which has a
+  frame buffer console and atomic kernel mode setting support.</para>
+  <para>
+  Every time the kernel
+  debugger is entered it calls kgdboc_pre_exp_handler() which in turn
+  calls con_debug_enter() in the virtual console layer.  On resuming kernel
+  execution, the kernel debugger calls kgdboc_post_exp_handler() which
+  in turn calls con_debug_leave().</para>
+  <para>Any video driver that wants to be compatible with the kernel
+  debugger and the atomic kms callbacks must implement the
+  mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations.
+  For the fb_debug_enter and fb_debug_leave the option exists to use
+  the generic drm fb helper functions or implement something custom for
+  the hardware.  The following example shows the initialization of the
+  .mode_set_base_atomic operation in
+  drivers/gpu/drm/i915/intel_display.c:
+  <informalexample>
+  <programlisting>
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+[...]
+        .mode_set_base_atomic = intel_pipe_set_base_atomic,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  <para>Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in
+  drivers/gpu/drm/i915/intel_fb.c:
+  <informalexample>
+  <programlisting>
+static struct fb_ops intelfb_ops = {
+[...]
+       .fb_debug_enter = drm_fb_helper_debug_enter,
+       .fb_debug_leave = drm_fb_helper_debug_leave,
+[...]
+};
+  </programlisting>
+  </informalexample>
+  </para>
+  </sect2>
   </sect1>
   </chapter>
   <chapter id="credits">
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
index 254c1d5d2e5..85b25275196 100644
--- a/Documentation/DocBook/stylesheet.xsl
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -6,4 +6,5 @@
 <param name="callout.graphics">0</param>
 <!-- <param name="paper.type">A4</param> -->
 <param name="generate.section.toc.level">2</param>
+<param name="use.id.as.filename">1</param>
 </stylesheet>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 72651f788f4..689e2371095 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -98,6 +98,17 @@ system, git, as a "commit log".  See #15, below.
 If your description starts to get long, that's a sign that you probably
 need to split up your patch.  See #3, next.
 
+When you submit or resubmit a patch or patch series, include the
+complete patch description and justification for it.  Don't just
+say that this is version N of the patch (series).  Don't expect the
+patch merger to refer back to earlier patch versions or referenced
+URLs to find the patch description and put that into the patch.
+I.e., the patch (series) and its description should be self-contained.
+This benefits both the patch merger(s) and reviewers.  Some reviewers
+probably didn't even receive earlier versions of the patch.
+
+If the patch fixes a logged bug entry, refer to that bug entry by
+number and URL.
 
 
 3) Separate your changes.
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index c34e12440fe..2df0365f2df 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,11 +1,8 @@
 00-INDEX
 	- This file
 
-cachefeatures.txt
-	- Supported cache features.
-
-Filesystems
-	- Requirements for mounting the root file system.
-
-bfin-gpio-note.txt
+bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
+
+bfin-spi-notes.txt
+	- Notes for using bfin spi bus driver.
diff --git a/Documentation/blackfin/Filesystems b/Documentation/blackfin/Filesystems
deleted file mode 100644
index 51260a1b803..00000000000
--- a/Documentation/blackfin/Filesystems
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * File:         Documentation/blackfin/Filesystems
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-		How to mount the root file system in uClinux/Blackfin
-		-----------------------------------------------------
-
-1	Mounting EXT3 File system.
-	------------------------
-
-	Creating an EXT3 File system for uClinux/Blackfin:
-
-
-Please follow the steps to form the EXT3 File system and mount the same as root
-file system.
-
-a	Make an ext3 file system as large as you want the final root file
-	system.
-
-		mkfs.ext3  /dev/ram0 <your-rootfs-size-in-1k-blocks>
-
-b	Mount this Empty file system on a free directory as:
-
-		mount -t ext3 /dev/ram0  ./test
-			where ./test is the empty directory.
-
-c	Copy your root fs directory that you have so carefully made over.
-
-		cp -af  /tmp/my_final_rootfs_files/* ./test
-
-		(For ex: cp -af uClinux-dist/romfs/* ./test)
-
-d	If you have done everything right till now you should be able to see
-	the required "root" dir's (that's etc, root, bin, lib, sbin...)
-
-e	Now unmount the file system
-
-		umount  ./test
-
-f	Create the root file system image.
-
-		dd if=/dev/ram0 bs=1k count=<your-rootfs-size-in-1k-blocks> \
-		> ext3fs.img
-
-
-Now you have to tell the kernel that will be mounting this file system as
-rootfs.
-So do a make menuconfig under kernel and select the Ext3 journaling file system
-support under File system --> submenu.
-
-
-2.	Mounting EXT2 File system.
-	-------------------------
-
-By default the ext2 file system image will be created if you invoke make from
-the top uClinux-dist directory.
-
-
-3.	Mounting CRAMFS File System
-	----------------------------
-
-To create a CRAMFS file system image execute the command
-
-	mkfs.cramfs ./test cramfs.img
-
-	where ./test is the target directory.
-
-
-4.	Mounting ROMFS File System
-	--------------------------
-
-To create a ROMFS file system image execute the command
-
-	genromfs -v -V "ROMdisk" -f romfs.img -d ./test
-
-	where ./test is the target directory
-
-
-5.	Mounting the JFFS2 Filesystem
-	-----------------------------
-
-To create a compressed JFFS filesystem (JFFS2), please execute the command
-
-	mkfs.jffs2 -d ./test -o jffs2.img
-
-	where ./test is the target directory.
-
-However, please make sure the following is in your kernel config.
-
-/*
- * RAM/ROM/Flash chip drivers
- */
-#define CONFIG_MTD_CFI 1
-#define CONFIG_MTD_ROM 1
-/*
- * Mapping drivers for chip access
- */
-#define CONFIG_MTD_COMPLEX_MAPPINGS 1
-#define CONFIG_MTD_BF533 1
-#undef CONFIG_MTD_UCLINUX
-
-Through the u-boot boot loader, use the jffs2.img in the corresponding
-partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c.
-
-NOTE - 	Currently the Flash driver is available only for EZKIT. Watch out for a
-	STAMP driver soon.
-
-
-6. 	Mounting the NFS File system
-	-----------------------------
-
-	For mounting the NFS please do the following in the kernel config.
-
-	In Networking Support --> Networking options --> TCP/IP networking -->
-		IP: kernel level autoconfiguration
-
-	Enable BOOTP Support.
-
-	In Kernel hacking --> Compiled-in kernel boot parameter add the following
-
-		root=/dev/nfs rw ip=bootp
-
-	In File system --> Network File system, Enable
-
-		NFS file system support --> NFSv3 client support
-		Root File system on NFS
-
-	in uClibc menuconfig, do the following
-	In Networking Support
-		enable Remote Procedure Call (RPC) support
-			Full RPC Support
-
-	On the Host side, ensure that /etc/dhcpd.conf looks something like this
-
-		ddns-update-style ad-hoc;
-		allow bootp;
-		subnet 10.100.4.0 netmask 255.255.255.0 {
-		default-lease-time 122209600;
-		max-lease-time 31557600;
-		group {
-			host bf533 {
-				hardware ethernet 00:CF:52:49:C3:01;
-				fixed-address 10.100.4.50;
-				option root-path "/home/nfsmount";
-			}
-		}
-
-	ensure that /etc/exports looks something like this
-		/home/nfsmount *(rw,no_root_squash,no_all_squash)
-
-	 run the following commands as root (may differ depending on your
-	 distribution) :
-		-  service nfs start
-		-  service portmap start
-		-  service dhcpd start
-		-  /usr/sbin/exportfs
diff --git a/Documentation/blackfin/bfin-spi-notes.txt b/Documentation/blackfin/bfin-spi-notes.txt
new file mode 100644
index 00000000000..556fa877f2e
--- /dev/null
+++ b/Documentation/blackfin/bfin-spi-notes.txt
@@ -0,0 +1,14 @@
+SPI Chip Select behavior:
+
+With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA
+bit whether the Slave Select Line is controlled by hardware (CPHA=0) or
+controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that
+the Slave Select is always under software control and being asserted during
+the entire SPI transfer. - And not just bits_per_word duration.
+
+In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this
+behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2
+timing, you can utilize the GPIO controlled SPI Slave Select option instead.
+
+You can even use the same pin whose peripheral role is a SSEL,
+but use it as a GPIO instead.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
deleted file mode 100644
index 75de51f9451..00000000000
--- a/Documentation/blackfin/cachefeatures.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * File:         Documentation/blackfin/cachefeatures.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description:  This file contains the simple DMA Implementation for Blackfin
- *
- * Rev:          $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-	- Instruction and Data cache initialization.
-		icache_init();
-		dcache_init();
-
-	-  Instruction and Data cache Invalidation Routines, when flushing the
-	   same is not required.
-		_icache_invalidate();
-		_dcache_invalidate();
-
-	Also, for invalidating the entire instruction and data cache, the below
-	routines are provided (another method for invalidation, refer page no 267 and 287 of
-	ADSP-BF533 Hardware Reference manual)
-
-		invalidate_entire_dcache();
-		invalidate_entire_icache();
-
-	-External Flushing of Instruction and data cache routines.
-
-		flush_instruction_cache();
-		flush_data_cache();
-
-	- Internal Flushing of Instruction and Data Cache.
-
-		icplb_flush();
-		dcplb_flush();
-
-	- Miscellaneous cache functions.
-
-		flush_cache_all();
-		flush_cache_mm();
-		invalidate_dcache_range();
-		flush_dcache_range();
-		flush_dcache_page();
-		flush_cache_range();
-		flush_cache_page();
-		invalidate_dcache_range();
-		flush_page_to_ram();
-
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 508b5b2b028..b9a83dd2473 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -7,7 +7,7 @@ Notes Written on Jan 15, 2002:
 
 Last Updated May 2, 2002
 September 2003: Updated I/O Scheduler portions
-	Nick Piggin <piggin@cyberone.com.au>
+	Nick Piggin <npiggin@kernel.dk>
 
 Introduction:
 
diff --git a/Documentation/coccinelle.txt b/Documentation/coccinelle.txt
new file mode 100644
index 00000000000..cd2b0283706
--- /dev/null
+++ b/Documentation/coccinelle.txt
@@ -0,0 +1,258 @@
+Copyright 2010 Nicolas Palix <npalix@diku.dk>
+Copyright 2010 Julia Lawall <julia@diku.dk>
+Copyright 2010 Gilles Muller <Gilles.Muller@lip6.fr>
+
+
+ Getting Coccinelle
+~~~~~~~~~~~~~~~~~~~~
+
+The semantic patches included in the kernel use the 'virtual rule'
+feature which was introduced in Coccinelle version 0.1.11.
+
+Coccinelle (>=0.2.0) is available through the package manager
+of many distributions, e.g. :
+
+ - Debian (>=squeeze)
+ - Fedora (>=13)
+ - Ubuntu (>=10.04 Lucid Lynx)
+ - OpenSUSE
+ - Arch Linux
+ - NetBSD
+ - FreeBSD
+
+
+You can get the latest version released from the Coccinelle homepage at
+http://coccinelle.lip6.fr/
+
+Once you have it, run the following command:
+
+     	./configure
+        make
+
+as a regular user, and install it with
+
+        sudo make install
+
+
+ Using Coccinelle on the Linux kernel
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A Coccinelle-specific target is defined in the top level
+Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
+front-end in the 'scripts' directory.
+
+Four modes are defined: report, patch, context, and org. The mode to
+use is specified by setting the MODE variable with 'MODE=<mode>'.
+
+'report' generates a list in the following format:
+  file:line:column-column: message
+
+'patch' proposes a fix, when possible.
+
+'context' highlights lines of interest and their context in a
+diff-like style.Lines of interest are indicated with '-'.
+
+'org' generates a report in the Org mode format of Emacs.
+
+Note that not all semantic patches implement all modes.
+
+To make a report for every semantic patch, run the following command:
+
+	make coccicheck MODE=report
+
+NB: The 'report' mode is the default one.
+
+To produce patches, run:
+
+	make coccicheck MODE=patch
+
+
+The coccicheck target applies every semantic patch available in the
+subdirectories of 'scripts/coccinelle' to the entire Linux kernel.
+
+For each semantic patch, a changelog message is proposed.  It gives a
+description of the problem being checked by the semantic patch, and
+includes a reference to Coccinelle.
+
+As any static code analyzer, Coccinelle produces false
+positives. Thus, reports must be carefully checked, and patches
+reviewed.
+
+
+ Using Coccinelle with a single semantic patch
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The optional make variable COCCI can be used to check a single
+semantic patch. In that case, the variable must be initialized with
+the name of the semantic patch to apply.
+
+For instance:
+
+	make coccicheck COCCI=<my_SP.cocci> MODE=patch
+or
+	make coccicheck COCCI=<my_SP.cocci> MODE=report
+
+
+ Proposing new semantic patches
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+New semantic patches can be proposed and submitted by kernel
+developers. For sake of clarity, they should be organized in the
+subdirectories of 'scripts/coccinelle/'.
+
+
+ Detailed description of the 'report' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'report' generates a list in the following format:
+  file:line:column-column: message
+
+Example:
+
+Running
+
+	make coccicheck MODE=report COCCI=scripts/coccinelle/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@r depends on !context && !patch && (org || report)@
+expression x;
+position p;
+@@
+
+ ERR_PTR@p(PTR_ERR(x))
+
+@script:python depends on report@
+p << r.p;
+x << r.x;
+@@
+
+msg="ERR_CAST can be used with %s" % (x)
+coccilib.report.print_report(p[0], msg)
+</smpl>
+
+This SmPL excerpt generates entries on the standard output, as
+illustrated below:
+
+/home/user/linux/crypto/ctr.c:188:9-16: ERR_CAST can be used with alg
+/home/user/linux/crypto/authenc.c:619:9-16: ERR_CAST can be used with auth
+/home/user/linux/crypto/xts.c:227:9-16: ERR_CAST can be used with alg
+
+
+ Detailed description of the 'patch' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When the 'patch' mode is available, it proposes a fix for each problem
+identified.
+
+Example:
+
+Running
+	make coccicheck MODE=patch COCCI=scripts/coccinelle/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@ depends on !context && patch && !org && !report @
+expression x;
+@@
+
+- ERR_PTR(PTR_ERR(x))
++ ERR_CAST(x)
+</smpl>
+
+This SmPL excerpt generates patch hunks on the standard output, as
+illustrated below:
+
+diff -u -p a/crypto/ctr.c b/crypto/ctr.c
+--- a/crypto/ctr.c 2010-05-26 10:49:38.000000000 +0200
++++ b/crypto/ctr.c 2010-06-03 23:44:49.000000000 +0200
+@@ -185,7 +185,7 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+-		return ERR_PTR(PTR_ERR(alg));
++		return ERR_CAST(alg);
+ 
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+ Detailed description of the 'context' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'context' highlights lines of interest and their context
+in a diff-like style.
+
+NOTE: The diff-like output generated is NOT an applicable patch. The
+      intent of the 'context' mode is to highlight the important lines
+      (annotated with minus, '-') and gives some surrounding context
+      lines around. This output can be used with the diff mode of
+      Emacs to review the code.
+
+Example:
+
+Running
+	make coccicheck MODE=context COCCI=scripts/coccinelle/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@ depends on context && !patch && !org && !report@
+expression x;
+@@
+
+* ERR_PTR(PTR_ERR(x))
+</smpl>
+
+This SmPL excerpt generates diff hunks on the standard output, as
+illustrated below:
+
+diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
+--- /home/user/linux/crypto/ctr.c	2010-05-26 10:49:38.000000000 +0200
++++ /tmp/nothing
+@@ -185,7 +185,6 @@ static struct crypto_instance *crypto_ct
+ 	alg = crypto_attr_alg(tb[1], CRYPTO_ALG_TYPE_CIPHER,
+ 				  CRYPTO_ALG_TYPE_MASK);
+ 	if (IS_ERR(alg))
+-		return ERR_PTR(PTR_ERR(alg));
+ 
+ 	/* Block size must be >= 4 bytes. */
+ 	err = -EINVAL;
+
+ Detailed description of the 'org' mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+'org' generates a report in the Org mode format of Emacs.
+
+Example:
+
+Running
+	make coccicheck MODE=org COCCI=scripts/coccinelle/err_cast.cocci
+
+will execute the following part of the SmPL script.
+
+<smpl>
+@r depends on !context && !patch && (org || report)@
+expression x;
+position p;
+@@
+
+ ERR_PTR@p(PTR_ERR(x))
+
+@script:python depends on org@
+p << r.p;
+x << r.x;
+@@
+
+msg="ERR_CAST can be used with %s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+</smpl>
+
+This SmPL excerpt generates Org entries on the standard output, as
+illustrated below:
+
+* TODO [[view:/home/user/linux/crypto/ctr.c::face=ovl-face1::linb=188::colb=9::cole=16][ERR_CAST can be used with alg]]
+* TODO [[view:/home/user/linux/crypto/authenc.c::face=ovl-face1::linb=619::colb=9::cole=16][ERR_CAST can be used with auth]]
+* TODO [[view:/home/user/linux/crypto/xts.c::face=ovl-face1::linb=227::colb=9::cole=16][ERR_CAST can be used with alg]]
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index be7030e4dd7..56cee4727b1 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -116,29 +116,6 @@ Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
 
-What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
-When:	2.6.35/2.6.36
-Files:	drivers/pcmcia/: pcmcia_ioctl.c
-Why:	With the 16-bit PCMCIA subsystem now behaving (almost) like a
-	normal hotpluggable bus, and with it using the default kernel
-	infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
-	control ioctl needed by cardmgr and cardctl from pcmcia-cs is
-	unnecessary and potentially harmful (it does not provide for
-	proper locking), and makes further cleanups and integration of the
-	PCMCIA subsystem into the Linux kernel device driver model more
-	difficult. The features provided by cardmgr and cardctl are either
-	handled by the kernel itself now or are available in the new
-	pcmciautils package available at
-	http://kernel.org/pub/linux/utils/kernel/pcmcia/
-
-	For all architectures except ARM, the associated config symbol
-	has been removed from kernel 2.6.34; for ARM, it will be likely
-	be removed from kernel 2.6.35. The actual code will then likely
-	be removed from kernel 2.6.36.
-Who:	Dominik Brodowski <linux@dominikbrodowski.net>
-
----------------------------
-
 What:	sys_sysctl
 When:	September 2010
 Option: CONFIG_SYSCTL_SYSCALL
@@ -174,6 +151,31 @@ Who:	Eric Biederman <ebiederm@xmission.com>
 
 ---------------------------
 
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.
+
+---------------------------
+
 What:	remove EXPORT_SYMBOL(kernel_thread)
 When:	August 2006
 Files:	arch/*/kernel/*_ksyms.c
@@ -468,16 +470,6 @@ Who:	Jan Kiszka <jan.kiszka@web.de>
 
 ----------------------------
 
-What:	xtime, wall_to_monotonic
-When:	2.6.36+
-Files:	kernel/time/timekeeping.c include/linux/time.h
-Why:	Cleaning up timekeeping internal values. Please use
-	existing timekeeping accessor functions to access
-	the equivalent functionality.
-Who:	John Stultz <johnstul@us.ibm.com>
-
-----------------------------
-
 What:	KVM paravirt mmu host support
 When:	January 2011
 Why:	The paravirt mmu host support is slower than non-paravirt mmu, both
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index a91e2e2095b..770267af5b3 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -343,8 +343,8 @@ This will look something like:
 	[root@andromeda ~]# head /proc/fs/fscache/objects
 	OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
 	======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
-	   17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
-	   1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+	   17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 0 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+	   1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 0 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
 
 where the first set of columns before the '|' describe the object:
 
@@ -362,7 +362,7 @@ where the first set of columns before the '|' describe the object:
 	EM	Object's event mask
 	EV	Events raised on this object
 	F	Object flags
-	S	Object slow-work work item flags
+	S	Object work item busy state mask (1:pending 2:running)
 
 and the second set of columns describe the object's cookie, if present:
 
@@ -395,8 +395,8 @@ and the following paired letters:
 	w	Show objects that don't have pending writes
 	R	Show objects that have outstanding reads
 	r	Show objects that don't have outstanding reads
-	S	Show objects that have slow work queued
-	s	Show objects that don't have slow work queued
+	S	Show objects that have work queued
+	s	Show objects that don't have work queued
 
 If neither side of a letter pair is given, then both are implied.  For example:
 
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index d3e7673995e..d5c0cef38a7 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -49,7 +49,10 @@ Mount options
 NILFS2 supports the following mount options:
 (*) == default
 
-nobarrier		Disables barriers.
+barrier(*)		This enables/disables the use of write barriers.  This
+nobarrier		requires an IO stack which can support barriers, and
+			if nilfs gets an error on a barrier write, it will
+			disable again with a warning.
 errors=continue		Keep going on a filesystem error.
 errors=remount-ro(*)	Remount the filesystem read-only on an error.
 errors=panic		Panic and halt the machine if an error occurs.
@@ -74,9 +77,10 @@ norecovery		Disable recovery of the filesystem on mount.
 			This disables every write access on the device for
 			read-only mounts or snapshots.  This option will fail
 			for r/w mounts on an unclean volume.
-discard			Issue discard/TRIM commands to the underlying block
-			device when blocks are freed.  This is useful for SSD
-			devices and sparse/thinly-provisioned LUNs.
+discard			This enables/disables the use of discard/TRIM commands.
+nodiscard(*)		The discard/TRIM commands are sent to the underlying
+			block device when blocks are freed.  This is useful
+			for SSD devices and sparse/thinly-provisioned LUNs.
 
 NILFS2 usage
 ============
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 8fe8895894d..a6aca874088 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -33,7 +33,8 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_adj - Adjust the oom-killer score
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
   3.4	/proc/<pid>/coredump_filter - Core dump filtering settings
@@ -1234,42 +1235,64 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
-------------------------------------------------------
-
-This file can be used to adjust the score used to select which processes
-should be killed in an  out-of-memory  situation.  Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer.  Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
-
-The process to be killed in an out-of-memory situation is selected among all others
-based on its badness score. This value equals the original memory size of the process
-and is then updated according to its CPU time (utime + stime) and the
-run time (uptime - start time). The longer it runs the smaller is the score.
-Badness score is divided by the square root of the CPU time and then by
-the double square root of the run time.
-
-Swapped out tasks are killed first. Half of each child's memory size is added to
-the parent's score if they do not share the same memory. Thus forking servers
-are the prime candidates to be killed. Having only one 'hungry' child will make
-parent less preferable than the child.
-
-/proc/<pid>/oom_score shows process' current badness score.
-
-The following heuristics are then applied:
- * if the task was reniced, its score doubles
- * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
- 	or CAP_SYS_RAWIO) have their score divided by 4
- * if oom condition happened in one cpuset and checked process does not belong
- 	to it, its score is divided by 8
- * the resulting score is multiplied by two to the power of oom_adj, i.e.
-	points <<= oom_adj when it is positive and
-	points >>= -(oom_adj) otherwise
-
-The task with the highest badness score is then selected and its children
-are killed, process itself will be killed in an OOM situation when it does
-not have children or some of them disabled oom like described above.
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+--------------------------------------------------------------------------------
+
+These file can be used to adjust the badness heuristic used to select which
+process gets killed in out of memory conditions.
+
+The badness heuristic assigns a value to each candidate task ranging from 0
+(never kill) to 1000 (always kill) to determine which process is targeted.  The
+units are roughly a proportion along that range of allowed memory the process
+may allocate from based on an estimation of its current memory and swap use.
+For example, if a task is using all allowed memory, its badness score will be
+1000.  If it is using half of its allowed memory, its score will be 500.
+
+There is an additional factor included in the badness score: root
+processes are given 3% extra memory over other tasks.
+
+The amount of "allowed" memory depends on the context in which the oom killer
+was called.  If it is due to the memory assigned to the allocating task's cpuset
+being exhausted, the allowed memory represents the set of mems assigned to that
+cpuset.  If it is due to a mempolicy's node(s) being exhausted, the allowed
+memory represents the set of mempolicy nodes.  If it is due to a memory
+limit (or swap limit) being reached, the allowed memory is that configured
+limit.  Finally, if it is due to the entire system being out of memory, the
+allowed memory represents all allocatable resources.
+
+The value of /proc/<pid>/oom_score_adj is added to the badness score before it
+is used to determine which task to kill.  Acceptable values range from -1000
+(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX).  This allows userspace to
+polarize the preference for oom killing either by always preferring a certain
+task or completely disabling it.  The lowest possible value, -1000, is
+equivalent to disabling oom killing entirely for that task since it will always
+report a badness score of 0.
+
+Consequently, it is very simple for userspace to define the amount of memory to
+consider for each task.  Setting a /proc/<pid>/oom_score_adj value of +500, for
+example, is roughly equivalent to allowing the remainder of tasks sharing the
+same system, cpuset, mempolicy, or memory controller resources to use at least
+50% more memory.  A value of -500, on the other hand, would be roughly
+equivalent to discounting 50% of the task's allowed memory from being considered
+as scoring against the task.
+
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
+Writing to /proc/<pid>/oom_score_adj or /proc/<pid>/oom_adj will change the
+other with its scaled value.
+
+NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
+Documentation/feature-removal-schedule.txt.
+
+Caveat: when a parent task is selected, the oom killer will sacrifice any first
+generation children with seperate address spaces instead, if possible.  This
+avoids servers and important system daemons from being killed and loses the
+minimal amount of work.
+
 
 3.2 /proc/<pid>/oom_score - Display current oom-killer score
 -------------------------------------------------------------
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 85354b32d73..74eaac26f8b 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -39,7 +39,7 @@ files, each with their own function.
        local_cpus	   nearby CPU mask (cpumask, ro)
        remove		   remove device from kernel's list (ascii, wo)
        resource		   PCI resource host addresses (ascii, ro)
-       resource0..N	   PCI resource N, if present (binary, mmap)
+       resource0..N	   PCI resource N, if present (binary, mmap, rw[1])
        resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
        rom		   PCI ROM resource, if present (binary, ro)
        subsystem_device	   PCI subsystem device (ascii, ro)
@@ -54,13 +54,16 @@ files, each with their own function.
   binary - file contains binary data
   cpumask - file contains a cpumask type
 
+[1] rw for RESOURCE_IO (I/O port) regions only
+
 The read only files are informational, writes to them will be ignored, with
 the exception of the 'rom' file.  Writable files can be used to perform
 actions on the device (e.g. changing config space, detaching a device).
 mmapable files are available via an mmap of the file at offset 0 and can be
 used to do actual device programming from userspace.  Note that some platforms
 don't support mmapping of certain resources, so be sure to check the return
-value from any attempted mmap.
+value from any attempted mmap.  The most notable of these are I/O port
+resources, which also provide read/write access.
 
 The 'enable' file provides a counter that indicates how many times the device 
 has been enabled.  If the 'enable' file currently returns '4', and a '1' is
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 931c806642c..5d1335faec2 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -4,7 +4,7 @@ sysfs - _The_ filesystem for exporting kernel objects.
 Patrick Mochel	<mochel@osdl.org>
 Mike Murphy <mamurph@cs.clemson.edu>
 
-Revised:    22 February 2009
+Revised:    15 July 2010
 Original:   10 January 2003
 
 
@@ -124,7 +124,7 @@ show and store methods of the attribute owners.
 
 struct sysfs_ops {
         ssize_t (*show)(struct kobject *, struct attribute *, char *);
-        ssize_t (*store)(struct kobject *, struct attribute *, const char *);
+        ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
 };
 
 [ Subsystems should have already defined a struct kobj_type as a
@@ -139,18 +139,22 @@ calls the associated methods.
 
 To illustrate:
 
+#define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
-#define to_dev(d) container_of(d, struct device, kobj)
 
-static ssize_t
-dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
+                             char *buf)
 {
-        struct device_attribute * dev_attr = to_dev_attr(attr);
-        struct device * dev = to_dev(kobj);
-        ssize_t ret = 0;
+        struct device_attribute *dev_attr = to_dev_attr(attr);
+        struct device *dev = to_dev(kobj);
+        ssize_t ret = -EIO;
 
         if (dev_attr->show)
-                ret = dev_attr->show(dev, buf);
+                ret = dev_attr->show(dev, dev_attr, buf);
+        if (ret >= (ssize_t)PAGE_SIZE) {
+                print_symbol("dev_attr_show: %s returned bad count\n",
+                                (unsigned long)dev_attr->show);
+        }
         return ret;
 }
 
@@ -163,10 +167,9 @@ To read or write attributes, show() or store() methods must be
 specified when declaring the attribute. The method types should be as
 simple as those defined for device attributes:
 
-ssize_t (*show)(struct device * dev, struct device_attribute * attr,
-                char * buf);
-ssize_t (*store)(struct device * dev, struct device_attribute * attr,
-                 const char * buf);
+ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                 const char *buf, size_t count);
 
 IOW, they should take only an object, an attribute, and a buffer as parameters.
 
@@ -209,8 +212,8 @@ Other notes:
 
 - show() should always use snprintf(). 
 
-- store() should return the number of bytes used from the buffer. This
-  can be done using strlen().
+- store() should return the number of bytes used from the buffer. If the
+  entire buffer has been used, just return the count argument.
 
 - show() or store() can always return errors. If a bad value comes
   through, be sure to return an error.
@@ -223,15 +226,18 @@ Other notes:
 
 A very simple (and naive) implementation of a device attribute is:
 
-static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+                         char *buf)
 {
 	return snprintf(buf, PAGE_SIZE, "%s\n", dev->name);
 }
 
-static ssize_t store_name(struct device * dev, const char * buf)
+static ssize_t store_name(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
 {
-	sscanf(buf, "%20s", dev->name);
-	return strnlen(buf, PAGE_SIZE);
+        snprintf(dev->name, sizeof(dev->name), "%.*s",
+                 (int)min(count, sizeof(dev->name) - 1), buf);
+	return count;
 }
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
@@ -327,7 +333,7 @@ Structure:
 struct bus_attribute {
         struct attribute        attr;
         ssize_t (*show)(struct bus_type *, char * buf);
-        ssize_t (*store)(struct bus_type *, const char * buf);
+        ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
 };
 
 Declaring:
diff --git a/Documentation/firmware_class/hotplug-script b/Documentation/firmware_class/hotplug-script
index 1990130f2ab..8143a950b60 100644
--- a/Documentation/firmware_class/hotplug-script
+++ b/Documentation/firmware_class/hotplug-script
@@ -6,11 +6,12 @@
 
 HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/
 
-echo 1 > /sys/$DEVPATH/loading
-cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
-echo 0 > /sys/$DEVPATH/loading
-
-# To cancel the load in case of error:
-#
-#	echo -1 > /sys/$DEVPATH/loading
-#
+if [ "$SUBSYSTEM" == "firmware" -a "$ACTION" == "add" ]; then
+  if [ -f $HOTPLUG_FW_DIR/$FIRMWARE ]; then
+    echo 1 > /sys/$DEVPATH/loading
+    cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
+    echo 0 > /sys/$DEVPATH/loading
+  else
+    echo -1 > /sys/$DEVPATH/loading
+  fi
+fi
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 92267b62db5..25568f84480 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -21,8 +21,8 @@ Temperature is measured in degrees Celsius and measurement resolution is
 1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
 the actual value of temperature register is in fact a delta from TjMax.
 
-Temperature known as TjMax is the maximum junction temperature of processor.
-Intel defines this temperature as 85C or 100C. At this temperature, protection
+Temperature known as TjMax is the maximum junction temperature of processor,
+which depends on the CPU model. See table below. At this temperature, protection
 mechanism will perform actions to forcibly cool down the processor. Alarm
 may be raised, if the temperature grows enough (more than TjMax) to trigger
 the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
@@ -38,3 +38,104 @@ temp1_label	 - Contains string "Core X", where X is processor
 The TjMax temperature is set to 85 degrees C if undocumented model specific
 register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
 (sometimes) documented in processor datasheet.
+
+Appendix A. Known TjMax lists (TBD):
+Some information comes from ark.intel.com
+
+Process		Processor					TjMax(C)
+
+32nm		Core i3/i5/i7 Processors
+		i7 660UM/640/620, 640LM/620, 620M, 610E		105
+		i5 540UM/520/430, 540M/520/450/430		105
+		i3 330E, 370M/350/330				90 rPGA, 105 BGA
+		i3 330UM					105
+
+32nm		Core i7 Extreme Processors
+		980X						100
+
+32nm		Celeron Processors
+		U3400						105
+		P4505/P4500 					90
+
+45nm		Xeon Processors 5400 Quad-Core
+		X5492, X5482, X5472, X5470, X5460, X5450	85
+		E5472, E5462, E5450/40/30/20/10/05		85
+		L5408						95
+		L5430, L5420, L5410				70
+
+45nm		Xeon Processors 5200 Dual-Core
+		X5282, X5272, X5270, X5260			90
+		E5240						90
+		E5205, E5220					70, 90
+		L5240						70
+		L5238, L5215					95
+
+45nm		Atom Processors
+		D525/510/425/410				100
+		Z560/550/540/530P/530/520PT/520/515/510PT/510P	90
+		Z510/500					90
+		N475/470/455/450				100
+		N280/270					90
+		330/230						125
+
+45nm		Core2 Processors
+		Solo ULV SU3500/3300				100
+		T9900/9800/9600/9550/9500/9400/9300/8300/8100	105
+		T6670/6500/6400					105
+		T6600						90
+		SU9600/9400/9300				105
+		SP9600/9400					105
+		SL9600/9400/9380/9300				105
+		P9700/9600/9500/8800/8700/8600/8400/7570	105
+		P7550/7450					90
+
+45nm		Core2 Quad Processors
+		Q9100/9000					100
+
+45nm		Core2 Extreme Processors
+		X9100/9000					105
+		QX9300						100
+
+45nm		Core i3/i5/i7 Processors
+		i7 940XM/920					100
+		i7 840QM/820/740/720				100
+
+45nm		Celeron Processors
+		SU2300						100
+		900 						105
+
+65nm		Core2 Duo Processors
+		Solo U2200, U2100				100
+		U7700/7600/7500					100
+		T7800/7700/7600/7500/7400/7300/7250/7200/7100	100
+		T5870/5670/5600/5550/5500/5470/5450/5300/5270	100
+		T5250						100
+		T5800/5750/5200					85
+		L7700/7500/7400/7300/7200			100
+
+65nm		Core2 Extreme Processors
+		X7900/7800					100
+
+65nm		Core Duo Processors
+		U2500/2400					100
+		T2700/2600/2450/2400/2350/2300E/2300/2250/2050	100
+		L2500/2400/2300					100
+
+65nm		Core Solo Processors
+		U1500/1400/1300					100
+		T1400/1350/1300/1250				100
+
+65nm		Xeon Processors 5000 Quad-Core
+		X5000						90-95
+		E5000						80
+		L5000						70
+		L5318						95
+
+65nm		Xeon Processors 5000 Dual-Core
+		5080, 5063, 5060, 5050, 5030			80-90
+		5160, 5150, 5148, 5140, 5130, 5120, 5110	80
+		L5138						100
+
+65nm		Celeron Processors
+		T1700/1600					100
+		560/550/540/530					100
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index a7952c2bd95..1a07fd674cd 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -2,6 +2,10 @@ Kernel driver f71882fg
 ======================
 
 Supported chips:
+  * Fintek F71808E
+    Prefix: 'f71808fg'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71858FG
     Prefix: 'f71858fg'
     Addresses scanned: none, address read from Super I/O config space
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
new file mode 100644
index 00000000000..0e76ef12e4c
--- /dev/null
+++ b/Documentation/hwmon/jc42
@@ -0,0 +1,97 @@
+Kernel driver jc42
+==================
+
+Supported chips:
+  * Analog Devices ADT7408
+    Prefix: 'adt7408'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
+  * IDT TSE2002B3, TS3000B3
+    Prefix: 'tse2002b3', 'ts3000b3'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/products/getdoc.cfm?docid=18715691
+	http://www.idt.com/products/getdoc.cfm?docid=18715692
+  * Maxim MAX6604
+    Prefix: 'max6604'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
+  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+  * NXP Semiconductors SE97, SE97B
+    Prefix: 'se97'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.nxp.com/documents/data_sheet/SE97.pdf
+	http://www.nxp.com/documents/data_sheet/SE97B.pdf
+  * NXP Semiconductors SE98
+    Prefix: 'se98'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.nxp.com/documents/data_sheet/SE98.pdf
+  * ON Semiconductor CAT34TS02, CAT6095
+    Prefix: 'cat34ts02', 'cat6095'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheet:
+	http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
+	http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
+  * ST Microelectronics STTS424, STTS424E02
+    Prefix: 'stts424'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
+	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * JEDEC JC 42.4 compliant temperature sensor chips
+    Prefix: 'jc42'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheet: -
+
+Author:
+	Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+The driver auto-detects the chips listed above, but can be manually instantiated
+to support other JC 42.4 compliant chips.
+
+Example: the following will load the driver for a generic JC 42.4 compliant
+temperature sensor at address 0x18 on I2C bus #1:
+
+# modprobe jc42
+# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
+
+A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
+and critical temperature can be configured. There are alarms for high, low,
+and critical thresholds.
+
+There is also an hysteresis to control the thresholds for resetting alarms.
+Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5,
+3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those
+limits. The chip supports only a single register to configure the hysteresis,
+which applies to all limits. This register can be written by writing into
+temp1_crit_hyst. Other hysteresis attributes are read-only.
+
+Sysfs entries
+-------------
+
+temp1_input		Temperature (RO)
+temp1_min		Minimum temperature (RW)
+temp1_max		Maximum temperature (RW)
+temp1_crit		Critical high temperature (RW)
+
+temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_max_hyst		Maximum hysteresis temperature (RO)
+
+temp1_min_alarm		Temperature low alarm
+temp1_max_alarm		Temperature high alarm
+temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/hwmon/pkgtemp b/Documentation/hwmon/pkgtemp
new file mode 100644
index 00000000000..c8e1fb0fadd
--- /dev/null
+++ b/Documentation/hwmon/pkgtemp
@@ -0,0 +1,36 @@
+Kernel driver pkgtemp
+======================
+
+Supported chips:
+  * Intel family
+    Prefix: 'pkgtemp'
+    CPUID:
+    Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
+               Volume 3A: System Programming Guide
+
+Author: Fenghua Yu
+
+Description
+-----------
+
+This driver permits reading package level temperature sensor embedded inside
+Intel CPU package. The sensors can be in core, uncore, memory controller, or
+other components in a package. The feature is first implemented in Intel Sandy
+Bridge platform.
+
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because the actual
+value of temperature register is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of package.
+We get this from MSR_IA32_TEMPERATURE_TARGET. If the MSR is not accessible,
+we define TjMax as 100 degrees Celsius. At this temperature, protection
+mechanism will perform actions to forcibly cool down the package. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+temp1_input	  - Package temperature (in millidegrees Celsius).
+temp1_max        - All cooling devices should be turned on.
+temp1_crit	  - Maximum junction temperature (in millidegrees Celsius).
+temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+		    Correct CPU operation is no longer guaranteed.
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
new file mode 100644
index 00000000000..3820fc9ca52
--- /dev/null
+++ b/Documentation/hwmon/smm665
@@ -0,0 +1,157 @@
+Kernel driver smm665
+====================
+
+Supported chips:
+  * Summit Microelectronics SMM465
+    Prefix: 'smm465'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf
+  * Summit Microelectronics SMM665, SMM665B
+    Prefix: 'smm665'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
+  * Summit Microelectronics SMM665C
+    Prefix: 'smm665c'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf
+  * Summit Microelectronics SMM764
+    Prefix: 'smm764'
+    Addresses scanned: -
+    Datasheet:
+      http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf
+  * Summit Microelectronics SMM766, SMM766B
+    Prefix: 'smm766'
+    Addresses scanned: -
+    Datasheets:
+      http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
+      http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Module Parameters
+-----------------
+
+* vref: int
+  Default: 1250 (mV)
+  Reference voltage on VREF_ADC pin in mV. It should not be necessary to set
+  this parameter unless a non-default reference voltage is used.
+
+
+Description
+-----------
+
+[From datasheet] The SMM665 is an Active DC Output power supply Controller
+that monitors, margins and cascade sequences power. The part monitors six
+power supply channels as well as VDD, 12V input, two general-purpose analog
+inputs and an internal temperature sensor using a 10-bit ADC.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Support for SMM465, SMM764, and SMM766 has been implemented but is untested.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. When instantiating the device, you have to specify
+its configuration register address.
+
+Example: the following will load the driver for an SMM665 at address 0x57
+on I2C bus #1:
+$ modprobe smm665
+$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+This driver uses the values in the datasheet to convert ADC register values
+into the values specified in the sysfs-interface document. All attributes are
+read only.
+
+Min, max, lcrit, and crit values are used by the chip to trigger external signals
+and/or other activity. Triggered signals can include HEALTHY, RST, Power Off,
+or Fault depending on the chip configuration. The driver reports values as lcrit
+or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or
+max otherwise. For details please see the SMM665 datasheet.
+
+For SMM465 and SMM764, values for Channel E and F are reported but undefined.
+
+in1_input		12V input voltage (mV)
+in2_input		3.3V (VDD) input voltage (mV)
+in3_input		Channel A voltage (mV)
+in4_input		Channel B voltage (mV)
+in5_input		Channel C voltage (mV)
+in6_input		Channel D voltage (mV)
+in7_input		Channel E voltage (mV)
+in8_input		Channel F voltage (mV)
+in9_input		AIN1 voltage (mV)
+in10_input		AIN2 voltage (mV)
+
+in1_min			12v input minimum voltage (mV)
+in2_min			3.3V (VDD) input minimum voltage (mV)
+in3_min			Channel A minimum voltage (mV)
+in4_min			Channel B minimum voltage (mV)
+in5_min			Channel C minimum voltage (mV)
+in6_min			Channel D minimum voltage (mV)
+in7_min			Channel E minimum voltage (mV)
+in8_min			Channel F minimum voltage (mV)
+in9_min			AIN1 minimum voltage (mV)
+in10_min		AIN2 minimum voltage (mV)
+
+in1_max			12v input maximum voltage (mV)
+in2_max			3.3V (VDD) input maximum voltage (mV)
+in3_max			Channel A maximum voltage (mV)
+in4_max			Channel B maximum voltage (mV)
+in5_max			Channel C maximum voltage (mV)
+in6_max			Channel D maximum voltage (mV)
+in7_max			Channel E maximum voltage (mV)
+in8_max			Channel F maximum voltage (mV)
+in9_max			AIN1 maximum voltage (mV)
+in10_max		AIN2 maximum voltage (mV)
+
+in1_lcrit		12v input critical minimum voltage (mV)
+in2_lcrit		3.3V (VDD) input critical minimum voltage (mV)
+in3_lcrit		Channel A critical minimum voltage (mV)
+in4_lcrit		Channel B critical minimum voltage (mV)
+in5_lcrit		Channel C critical minimum voltage (mV)
+in6_lcrit		Channel D critical minimum voltage (mV)
+in7_lcrit		Channel E critical minimum voltage (mV)
+in8_lcrit		Channel F critical minimum voltage (mV)
+in9_lcrit		AIN1 critical minimum voltage (mV)
+in10_lcrit		AIN2 critical minimum voltage (mV)
+
+in1_crit		12v input critical maximum voltage (mV)
+in2_crit		3.3V (VDD) input critical maximum voltage (mV)
+in3_crit		Channel A critical maximum voltage (mV)
+in4_crit		Channel B critical maximum voltage (mV)
+in5_crit		Channel C critical maximum voltage (mV)
+in6_crit		Channel D critical maximum voltage (mV)
+in7_crit		Channel E critical maximum voltage (mV)
+in8_crit		Channel F critical maximum voltage (mV)
+in9_crit		AIN1 critical maximum voltage (mV)
+in10_crit		AIN2 critical maximum voltage (mV)
+
+in1_crit_alarm		12v input critical alarm
+in2_crit_alarm		3.3V (VDD) input critical alarm
+in3_crit_alarm		Channel A critical alarm
+in4_crit_alarm		Channel B critical alarm
+in5_crit_alarm		Channel C critical alarm
+in6_crit_alarm		Channel D critical alarm
+in7_crit_alarm		Channel E critical alarm
+in8_crit_alarm		Channel F critical alarm
+in9_crit_alarm		AIN1 critical alarm
+in10_crit_alarm		AIN2 critical alarm
+
+temp1_input		Chip tempererature
+temp1_min		Mimimum chip tempererature
+temp1_max		Maximum chip tempererature
+temp1_crit		Critical chip tempererature
+temp1_crit_alarm	Temperature critical alarm
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 2ec3d7d8998..33223ff121d 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -79,6 +79,7 @@ Code  Seq#(hex)	Include File		Comments
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
 '$'	00-0F	linux/perf_counter.h, linux/perf_event.h
+'&'	00-07	drivers/firewire/nosy-user.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
 '2'	01-04	linux/i2o.h
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 634c625da8c..1e5165aa9e4 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -22,11 +22,33 @@ building C files and assembler files.
 
 KAFLAGS
 --------------------------------------------------
-Additional options to the assembler.
+Additional options to the assembler (for built-in and modules).
+
+AFLAGS_MODULE
+--------------------------------------------------
+Addtional module specific options to use for $(AS).
+
+AFLAGS_KERNEL
+--------------------------------------------------
+Addtional options for $(AS) when used for assembler
+code for code that is compiled as built-in.
 
 KCFLAGS
 --------------------------------------------------
-Additional options to the C compiler.
+Additional options to the C compiler (for built-in and modules).
+
+CFLAGS_KERNEL
+--------------------------------------------------
+Addtional options for $(CC) when used to compile
+code that is compiled as built-in.
+
+CFLAGS_MODULE
+--------------------------------------------------
+Addtional module specific options to use for $(CC).
+
+LDFLAGS_MODULE
+--------------------------------------------------
+Additional options used for $(LD) when linking modules.
 
 KBUILD_VERBOSE
 --------------------------------------------------
@@ -40,15 +62,15 @@ Set the directory to look for the kernel source when building external
 modules.
 The directory can be specified in several ways:
 1) Use "M=..." on the command line
-2) Environmnet variable KBUILD_EXTMOD
-3) Environmnet variable SUBDIRS
+2) Environment variable KBUILD_EXTMOD
+3) Environment variable SUBDIRS
 The possibilities are listed in the order they take precedence.
 Using "M=..." will always override the others.
 
 KBUILD_OUTPUT
 --------------------------------------------------
 Specify the output directory when building the kernel.
-The output directory can also be specificed using "O=...".
+The output directory can also be specified using "O=...".
 Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
@@ -90,7 +112,7 @@ The script will be called with the following arguments:
     $3 - kernel map file
     $4 - default install path (use root directory if blank)
 
-The implmentation of "make install" is architecture specific
+The implementation of "make install" is architecture specific
 and it may differ from the above.
 
 INSTALLKERNEL is provided to enable the possibility to
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index b2cb16ebcb1..cca46b1a0f6 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -65,7 +65,7 @@ also use the environment variable KCONFIG_ALLCONFIG as a flag or a
 filename that contains config symbols that the user requires to be
 set to a specific value.  If KCONFIG_ALLCONFIG is used without a
 filename, "make *config" checks for a file named
-"all{yes/mod/no/random}.config" (corresponding to the *config command
+"all{yes/mod/no/def/random}.config" (corresponding to the *config command
 that was used) for symbol values that are to be forced.  If this file
 is not found, it checks for a file named "all.config" to contain forced
 values.
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 71c602d6168..c375313cb12 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -168,7 +168,7 @@ more details, with real examples.
 		#drivers/isdn/i4l/Makefile
 		# Makefile for the kernel ISDN subsystem and device drivers.
 		# Each configuration option enables a list of files.
-		obj-$(CONFIG_ISDN)             += isdn.o
+		obj-$(CONFIG_ISDN_I4L)         += isdn.o
 		obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
 
 --- 3.3 Loadable module goals - obj-m
@@ -187,34 +187,35 @@ more details, with real examples.
 	Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
 
 	If a kernel module is built from several source files, you specify
-	that you want to build a module in the same way as above.
-
-	Kbuild needs to know which the parts that you want to build your
-	module from, so you have to tell it by setting an
-	$(<module_name>-objs) variable.
+	that you want to build a module in the same way as above; however,
+	kbuild needs to know which object files you want to build your
+	module from, so you have to tell it by setting a $(<module_name>-y)
+	variable.
 
 	Example:
 		#drivers/isdn/i4l/Makefile
-		obj-$(CONFIG_ISDN) += isdn.o
-		isdn-objs := isdn_net_lib.o isdn_v110.o isdn_common.o
+		obj-$(CONFIG_ISDN_I4L) += isdn.o
+		isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
 
 	In this example, the module name will be isdn.o. Kbuild will
-	compile the objects listed in $(isdn-objs) and then run
+	compile the objects listed in $(isdn-y) and then run
 	"$(LD) -r" on the list of these files to generate isdn.o.
 
-	Kbuild recognises objects used for composite objects by the suffix
-	-objs, and the suffix -y. This allows the Makefiles to use
-	the value of a CONFIG_ symbol to determine if an object is part
-	of a composite object.
+	Due to kbuild recognizing $(<module_name>-y) for composite objects,
+	you can use the value of a CONFIG_ symbol to optionally include an
+	object file as part of a composite object.
 
 	Example:
 		#fs/ext2/Makefile
-	        obj-$(CONFIG_EXT2_FS)        += ext2.o
-		ext2-y                       := balloc.o bitmap.o
-	        ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
+	        obj-$(CONFIG_EXT2_FS) += ext2.o
+		ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
+			  namei.o super.o symlink.o
+	        ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
+						xattr_trusted.o
 
-	In this example, xattr.o is only part of the composite object
-	ext2.o if $(CONFIG_EXT2_FS_XATTR) evaluates to 'y'.
+	In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
+	part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
+	evaluates to 'y'.
 
 	Note: Of course, when you are building objects into the kernel,
 	the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
@@ -244,12 +245,12 @@ more details, with real examples.
 	may contain both a built-in.o and a lib.a file.
 
 	Example:
-		#arch/i386/lib/Makefile
-		lib-y    := checksum.o delay.o
+		#arch/x86/lib/Makefile
+		lib-y    := delay.o
 
-	This will create a library lib.a based on checksum.o and delay.o.
-	For kbuild to actually recognize that there is a lib.a being built,
-	the directory shall be listed in libs-y.
+	This will create a library lib.a based on delay.o. For kbuild to
+	actually recognize that there is a lib.a being built, the directory
+	shall be listed in libs-y.
 	See also "6.3 List directories to visit when descending".
 
 	Use of lib-y is normally restricted to lib/ and arch/*/lib.
@@ -284,43 +285,40 @@ more details, with real examples.
 --- 3.7 Compilation flags
 
     ccflags-y, asflags-y and ldflags-y
-	The three flags listed above applies only to the kbuild makefile
-	where they are assigned. They are used for all the normal
-	cc, as and ld invocation happenign during a recursive build.
+	These three flags apply only to the kbuild makefile in which they
+	are assigned. They are used for all the normal cc, as and ld
+	invocations happening during a recursive build.
 	Note: Flags with the same behaviour were previously named:
 	EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
-	They are yet supported but their use are deprecated.
+	They are still supported but their usage is deprecated.
 
-	ccflags-y specifies options for compiling C files with $(CC).
+	ccflags-y specifies options for compiling with $(CC).
 
 	Example:
-		# drivers/sound/emu10k1/Makefile
-		ccflags-y += -I$(obj)
-		ccflags-$(DEBUG) += -DEMU10K1_DEBUG
-
+		# drivers/acpi/Makefile
+		ccflags-y := -Os
+		ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
 
 	This variable is necessary because the top Makefile owns the
 	variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
 	entire tree.
 
-	asflags-y is a similar string for per-directory options
-	when compiling assembly language source.
+	asflags-y specifies options for assembling with $(AS).
 
 	Example:
-		#arch/x86_64/kernel/Makefile
-		asflags-y := -traditional
-
+		#arch/sparc/kernel/Makefile
+		asflags-y := -ansi
 
-	ldflags-y is a string for per-directory options to $(LD).
+	ldflags-y specifies options for linking with $(LD).
 
 	Example:
-		#arch/m68k/fpsp040/Makefile
-		ldflags-y := -x
+		#arch/cris/boot/compressed/Makefile
+		ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
 
     subdir-ccflags-y, subdir-asflags-y
-	The two flags listed above are similar to ccflags-y and as-falgs-y.
-	The difference is that the subdir- variants has effect for the kbuild
-	file where tey are present and all subdirectories.
+	The two flags listed above are similar to ccflags-y and asflags-y.
+	The difference is that the subdir- variants have effect for the kbuild
+	file where they are present and all subdirectories.
 	Options specified using subdir-* are added to the commandline before
 	the options specified using the non-subdir variants.
 
@@ -340,18 +338,18 @@ more details, with real examples.
 		CFLAGS_aha152x.o =   -DAHA152X_STAT -DAUTOCONF
 		CFLAGS_gdth.o    = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ \
 				     -DGDTH_STATISTICS
-		CFLAGS_seagate.o =   -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
 
-	These three lines specify compilation flags for aha152x.o,
-	gdth.o, and seagate.o
+	These two lines specify compilation flags for aha152x.o and gdth.o.
 
 	$(AFLAGS_$@) is a similar feature for source files in assembly
 	languages.
 
 	Example:
 		# arch/arm/kernel/Makefile
-		AFLAGS_head-armv.o := -DTEXTADDR=$(TEXTADDR) -traditional
-		AFLAGS_head-armo.o := -DTEXTADDR=$(TEXTADDR) -traditional
+		AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
+		AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
+		AFLAGS_iwmmxt.o      := -Wa,-mcpu=iwmmxt
+
 
 --- 3.9 Dependency tracking
 
@@ -923,16 +921,33 @@ When kbuild executes, the following steps are followed (roughly):
 	The first example utilises the trick that a config option expands
 	to 'y' when selected.
 
-    CFLAGS_KERNEL	$(CC) options specific for built-in
+    KBUILD_AFLAGS_KERNEL	$(AS) options specific for built-in
+
+	$(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile
+	resident kernel code.
+
+    KBUILD_AFLAGS_MODULE   Options for $(AS) when building modules
+
+	$(KBUILD_AFLAGS_MODULE) is used to add arch specific options that
+	are used for $(AS).
+	From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
 
-	$(CFLAGS_KERNEL) contains extra C compiler flags used to compile
+    KBUILD_CFLAGS_KERNEL	$(CC) options specific for built-in
+
+	$(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile
 	resident kernel code.
 
-    CFLAGS_MODULE	$(CC) options specific for modules
+    KBUILD_CFLAGS_MODULE   Options for $(CC) when building modules
+
+	$(KBUILD_CFLAGS_MODULE) is used to add arch specific options that
+	are used for $(CC).
+	From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
 
-	$(CFLAGS_MODULE) contains extra C compiler flags used to compile code
-	for loadable kernel modules.
+    KBUILD_LDFLAGS_MODULE   Options for $(LD) when linking modules
 
+	$(KBUILD_LDFLAGS_MODULE) is used to add arch specific options
+	used when linking modules. This is often a linker script.
+	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
 
 --- 6.2 Add prerequisites to archprepare:
 
@@ -1176,14 +1191,14 @@ When kbuild executes, the following steps are followed (roughly):
 === 7 Kbuild syntax for exported headers
 
 The kernel include a set of headers that is exported to userspace.
-Many headers can be exported as-is but other headers requires  a
+Many headers can be exported as-is but other headers require a
 minimal pre-processing before they are ready for user-space.
 The pre-processing does:
 - drop kernel specific annotations
 - drop include of compiler.h
-- drop all sections that is kernel internat (guarded by ifdef __KERNEL__)
+- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
 
-Each relevant directory contain a file name "Kbuild" which specify the
+Each relevant directory contains a file name "Kbuild" which specifies the
 headers to be exported.
 See subsequent chapter for the syntax of the Kbuild file.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d9239d5f3ad..44f6b19c50b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -73,7 +73,6 @@ parameter is applicable:
 	MTD	MTD (Memory Technology Device) support is enabled.
 	NET	Appropriate network support is enabled.
 	NUMA	NUMA support is enabled.
-	GENERIC_TIME The generic timeofday code is enabled.
 	NFS	Appropriate NFS support is enabled.
 	OSS	OSS sound support is enabled.
 	PV_OPS	A paravirtualized kernel is enabled.
@@ -116,6 +115,7 @@ parameter is applicable:
 			More X86-64 boot options can be found in
 			Documentation/x86/x86_64/boot-options.txt .
 	X86	Either 32bit or 64bit x86 (same as X86-32+X86-64)
+	XEN	Xen support is enabled
 
 In addition, the following text indicates that the option:
 
@@ -281,19 +281,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			no: ACPI OperationRegions are not marked as reserved,
 			no further checks are performed.
 
-	ad1848=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<type>
-
 	add_efi_memmap	[EFI; X86] Include EFI memory map in
 			kernel's map of available physical RAM.
 
 	advansys=	[HW,SCSI]
 			See header of drivers/scsi/advansys.c.
 
-	aedsp16=	[HW,OSS] Audio Excel DSP 16
-			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
-			See also header of sound/oss/aedsp16.c.
-
 	agp=		[AGP]
 			{ off | try_unsupported }
 			off: disable AGP support
@@ -312,6 +305,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	aic79xx=	[HW,SCSI]
 			See Documentation/scsi/aic79xx.txt.
 
+	ALSA		[HW,ALSA]
+			See Documentation/sound/alsa/alsa-parameters.txt
+
 	alignment=	[KNL,ARM]
 			Allow the default userspace alignment fault handler
 			behaviour to be specified.  Bit 0 enables warnings,
@@ -469,7 +465,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			clocksource is not available, it defaults to PIT.
 			Format: { pit | tsc | cyclone | pmtmr }
 
-	clocksource=	[GENERIC_TIME] Override the default clocksource
+	clocksource=	Override the default clocksource
 			Format: <string>
 			Override the default clocksource and use the clocksource
 			with the name specified.
@@ -656,8 +652,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Disable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs.
 
-	dmasound=	[HW,OSS] Sound subsystem buffers
-
 	dma_debug=off	If the kernel is compiled with DMA_API_DEBUG support,
 			this option disables the debugging code at boot.
 
@@ -1144,9 +1138,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	kgdboc=		[KGDB,HW] kgdb over consoles.
 			Requires a tty driver that supports console polling,
 			or a supported polling keyboard driver (non-usb).
-			Serial only format: <serial_device>[,baud]
-			keyboard only format: kbd
-			keyboard and serial format: kbd,<serial_device>[,baud]
+			 Serial only format: <serial_device>[,baud]
+			 keyboard only format: kbd
+			 keyboard and serial format: kbd,<serial_device>[,baud]
+			Optional Kernel mode setting:
+			 kms, kbd format: kms,kbd
+			 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
 
 	kgdbwait	[KGDB] Stop kernel execution and enter the
 			kernel debugger at the earliest opportunity.
@@ -1524,9 +1521,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			that the amount of memory usable for all allocations
 			is not too small.
 
-	mpu401=		[HW,OSS]
-			Format: <io>,<irq>
-
 	MTD_Partition=	[MTD]
 			Format: <name>,<region-number>,<size>,<offset>
 
@@ -1812,6 +1806,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nousb		[USB] Disable the USB subsystem
 
+	nowatchdog	[KNL] Disable the lockup detector.
+
 	nowb		[ARM]
 
 	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
@@ -1849,9 +1845,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			For example, to override I2C bus2:
 			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
 
-	opl3=		[HW,OSS]
-			Format: <io>
-
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
@@ -1863,6 +1856,9 @@ and is between 256 and 4096 characters. It is defined in the file
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
+	OSS		[HW,OSS]
+			See Documentation/sound/oss/oss-parameters.txt
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.
@@ -1899,9 +1895,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Currently this function knows 686a and 8231 chips.
 			Format: [spp|ps2|epp|ecp|ecpepp]
 
-	pas2=		[HW,OSS] Format:
-			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
-
 	pas16=		[HW,SCSI]
 			See header of drivers/scsi/pas16.c.
 
@@ -1970,6 +1963,8 @@ and is between 256 and 4096 characters. It is defined in the file
 		norom		[X86] Do not assign address space to
 				expansion ROMs that do not already have
 				BIOS assigned address ranges.
+		nobar		[X86] Do not assign address space to the
+				BARs that weren't assigned by the BIOS.
 		irqmask=0xMMMM	[X86] Set a bit mask of IRQs allowed to be
 				assigned automatically to PCI devices. You can
 				make the kernel exclude IRQs of your ISA cards
@@ -2171,10 +2166,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
-	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
-			Format:
-			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
-
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2390,128 +2381,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	snd-ad1816a=	[HW,ALSA]
-
-	snd-ad1848=	[HW,ALSA]
-
-	snd-ali5451=	[HW,ALSA]
-
-	snd-als100=	[HW,ALSA]
-
-	snd-als4000=	[HW,ALSA]
-
-	snd-azt2320=	[HW,ALSA]
-
-	snd-cmi8330=	[HW,ALSA]
-
-	snd-cmipci=	[HW,ALSA]
-
-	snd-cs4231=	[HW,ALSA]
-
-	snd-cs4232=	[HW,ALSA]
-
-	snd-cs4236=	[HW,ALSA]
-
-	snd-cs4281=	[HW,ALSA]
-
-	snd-cs46xx=	[HW,ALSA]
-
-	snd-dt019x=	[HW,ALSA]
-
-	snd-dummy=	[HW,ALSA]
-
-	snd-emu10k1=	[HW,ALSA]
-
-	snd-ens1370=	[HW,ALSA]
-
-	snd-ens1371=	[HW,ALSA]
-
-	snd-es968=	[HW,ALSA]
-
-	snd-es1688=	[HW,ALSA]
-
-	snd-es18xx=	[HW,ALSA]
-
-	snd-es1938=	[HW,ALSA]
-
-	snd-es1968=	[HW,ALSA]
-
-	snd-fm801=	[HW,ALSA]
-
-	snd-gusclassic=	[HW,ALSA]
-
-	snd-gusextreme=	[HW,ALSA]
-
-	snd-gusmax=	[HW,ALSA]
-
-	snd-hdsp=	[HW,ALSA]
-
-	snd-ice1712=	[HW,ALSA]
-
-	snd-intel8x0=	[HW,ALSA]
-
-	snd-interwave=	[HW,ALSA]
-
-	snd-interwave-stb=
-			[HW,ALSA]
-
-	snd-korg1212=	[HW,ALSA]
-
-	snd-maestro3=	[HW,ALSA]
-
-	snd-mpu401=	[HW,ALSA]
-
-	snd-mtpav=	[HW,ALSA]
-
-	snd-nm256=	[HW,ALSA]
-
-	snd-opl3sa2=	[HW,ALSA]
-
-	snd-opti92x-ad1848=
-			[HW,ALSA]
-
-	snd-opti92x-cs4231=
-			[HW,ALSA]
-
-	snd-opti93x=	[HW,ALSA]
-
-	snd-pmac=	[HW,ALSA]
-
-	snd-rme32=	[HW,ALSA]
-
-	snd-rme96=	[HW,ALSA]
-
-	snd-rme9652=	[HW,ALSA]
-
-	snd-sb8=	[HW,ALSA]
-
-	snd-sb16=	[HW,ALSA]
-
-	snd-sbawe=	[HW,ALSA]
-
-	snd-serial=	[HW,ALSA]
-
-	snd-sgalaxy=	[HW,ALSA]
-
-	snd-sonicvibes=	[HW,ALSA]
-
-	snd-sun-amd7930=
-			[HW,ALSA]
-
-	snd-sun-cs4231=	[HW,ALSA]
-
-	snd-trident=	[HW,ALSA]
-
-	snd-usb-audio=	[HW,ALSA,USB]
-
-	snd-via82xx=	[HW,ALSA]
-
-	snd-virmidi=	[HW,ALSA]
-
-	snd-wavefront=	[HW,ALSA]
-
-	snd-ymfpci=	[HW,ALSA]
-
 	softlockup_panic=
 			[KNL] Should the soft-lockup detector generate panics.
 
@@ -2526,9 +2395,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	spia_pedr=
 	spia_peddr=
 
-	sscape=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
-
 	st=		[HW,SCSI] SCSI tape parameters (buffers, etc.)
 			See Documentation/scsi/st.txt.
 
@@ -2668,10 +2534,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			to facilitate early boot debugging.
 			See also Documentation/trace/events.txt
 
-	trix=		[HW,OSS] MediaTrix AudioTrix Pro
-			Format:
-			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
-
 	tsc=		Disable clocksource-must-verify flag for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -2688,12 +2550,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
 			See header of drivers/scsi/u14-34f.c.
 
-	uart401=	[HW,OSS]
-			Format: <io>,<irq>
-
-	uart6850=	[HW,OSS]
-			Format: <io>,<irq>
-
 	uhash_entries=	[KNL,NET]
 			Set number of hash buckets for UDP/UDP-Lite connections
 
@@ -2859,9 +2715,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			overridden by individual drivers. 0 will hide
 			cursors, 1 will display them.
 
-	waveartist=	[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>
-
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.
 
@@ -2886,6 +2739,16 @@ and is between 256 and 4096 characters. It is defined in the file
 	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
 	xd_geo=		See header of drivers/block/xd.c.
 
+	xen_emul_unplug=		[HW,X86,XEN]
+			Unplug Xen emulated devices
+			Format: [unplug0,][unplug1]
+			ide-disks -- unplug primary master IDE devices
+			aux-ide-disks -- unplug non-primary-master IDE devices
+			nics -- unplug network devices
+			all -- unplug all emulated devices (NICs and IDE disks)
+			ignore -- continue loading the Xen platform PCI driver even
+				if the version check failed
+
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
@@ -2894,5 +2757,4 @@ ______________________________________________________________________
 
 TODO:
 
-	Add documentation for ALSA options.
 	Add more DRM drivers.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 6653017680d..1762b81fcdf 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -285,6 +285,7 @@ architectures:
 - sparc64 (Return probes not yet implemented.)
 - arm
 - ppc
+- mips
 
 3. Configuring Kprobes
 
diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt
new file mode 100644
index 00000000000..aefd1e68180
--- /dev/null
+++ b/Documentation/networking/dns_resolver.txt
@@ -0,0 +1,146 @@
+			     ===================
+			     DNS Resolver Module
+			     ===================
+
+Contents:
+
+ - Overview.
+ - Compilation.
+ - Setting up.
+ - Usage.
+ - Mechanism.
+ - Debugging.
+
+
+========
+OVERVIEW
+========
+
+The DNS resolver module provides a way for kernel services to make DNS queries
+by way of requesting a key of key type dns_resolver.  These queries are
+upcalled to userspace through /sbin/request-key.
+
+These routines must be supported by userspace tools dns.upcall, cifs.upcall and
+request-key.  It is under development and does not yet provide the full feature
+set.  The features it does support include:
+
+ (*) Implements the dns_resolver key_type to contact userspace.
+
+It does not yet support the following AFS features:
+
+ (*) Dns query support for AFSDB resource record.
+
+This code is extracted from the CIFS filesystem.
+
+
+===========
+COMPILATION
+===========
+
+The module should be enabled by turning on the kernel configuration options:
+
+	CONFIG_DNS_RESOLVER	- tristate "DNS Resolver support"
+
+
+==========
+SETTING UP
+==========
+
+To set up this facility, the /etc/request-key.conf file must be altered so that
+/sbin/request-key can appropriately direct the upcalls.  For example, to handle
+basic dname to IPv4/IPv6 address resolution, the following line should be
+added:
+
+	#OP	TYPE		DESC	CO-INFO	PROGRAM ARG1 ARG2 ARG3 ...
+	#======	============	=======	=======	==========================
+	create	dns_resolver  	*	*	/usr/sbin/cifs.upcall %k
+
+To direct a query for query type 'foo', a line of the following should be added
+before the more general line given above as the first match is the one taken.
+
+	create	dns_resolver  	foo:*	*	/usr/sbin/dns.foo %k
+
+
+
+=====
+USAGE
+=====
+
+To make use of this facility, one of the following functions that are
+implemented in the module can be called after doing:
+
+	#include <linux/dns_resolver.h>
+
+ (1) int dns_query(const char *type, const char *name, size_t namelen,
+		   const char *options, char **_result, time_t *_expiry);
+
+     This is the basic access function.  It looks for a cached DNS query and if
+     it doesn't find it, it upcalls to userspace to make a new DNS query, which
+     may then be cached.  The key description is constructed as a string of the
+     form:
+
+		[<type>:]<name>
+
+     where <type> optionally specifies the particular upcall program to invoke,
+     and thus the type of query to do, and <name> specifies the string to be
+     looked up.  The default query type is a straight hostname to IP address
+     set lookup.
+
+     The name parameter is not required to be a NUL-terminated string, and its
+     length should be given by the namelen argument.
+
+     The options parameter may be NULL or it may be a set of options
+     appropriate to the query type.
+
+     The return value is a string appropriate to the query type.  For instance,
+     for the default query type it is just a list of comma-separated IPv4 and
+     IPv6 addresses.  The caller must free the result.
+
+     The length of the result string is returned on success, and a negative
+     error code is returned otherwise.  -EKEYREJECTED will be returned if the
+     DNS lookup failed.
+
+     If _expiry is non-NULL, the expiry time (TTL) of the result will be
+     returned also.
+
+
+=========
+MECHANISM
+=========
+
+The dnsresolver module registers a key type called "dns_resolver".  Keys of
+this type are used to transport and cache DNS lookup results from userspace.
+
+When dns_query() is invoked, it calls request_key() to search the local
+keyrings for a cached DNS result.  If that fails to find one, it upcalls to
+userspace to get a new result.
+
+Upcalls to userspace are made through the request_key() upcall vector, and are
+directed by means of configuration lines in /etc/request-key.conf that tell
+/sbin/request-key what program to run to instantiate the key.
+
+The upcall handler program is responsible for querying the DNS, processing the
+result into a form suitable for passing to the keyctl_instantiate_key()
+routine.  This then passes the data to dns_resolver_instantiate() which strips
+off and processes any options included in the data, and then attaches the
+remainder of the string to the key as its payload.
+
+The upcall handler program should set the expiry time on the key to that of the
+lowest TTL of all the records it has extracted a result from.  This means that
+the key will be discarded and recreated when the data it holds has expired.
+
+dns_query() returns a copy of the value attached to the key, or an error if
+that is indicated instead.
+
+See <file:Documentation/keys-request-key.txt> for further information about
+request-key function.
+
+
+=========
+DEBUGGING
+=========
+
+Debugging messages can be turned on dynamically by writing a 1 into the
+following file:
+
+        /sys/module/dnsresolver/parameters/debug
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
new file mode 100644
index 00000000000..ab2d7183189
--- /dev/null
+++ b/Documentation/networking/igb.txt
@@ -0,0 +1,132 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+This driver supports all 82575, 82576 and 82580-based Intel (R) gigabit network
+connections.
+
+For specific information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+max_vfs
+-------
+Valid Range:   0-7
+Default Value: 0
+
+This parameter adds support for SR-IOV.  It causes the driver to spawn up to
+max_vfs worth of virtual function.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+    loss of link.
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.
+
+  http://sourceforge.net/projects/gkernel.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility.
+
+  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the igb driver must be
+  loaded when shutting down or rebooting the system.
+
+  Wake On LAN is only supported on port A of multi-port adapters.
+
+  Wake On LAN is not supported for the Intel(R) Gigabit VT Quad Port Server
+  Adapter.
+
+  Multiqueue
+  ----------
+  In this mode, a separate MSI-X vector is allocated for each queue and one
+  for "other" interrupts such as link status change and errors.  All
+  interrupts are throttled via interrupt moderation.  Interrupt moderation
+  must be used to avoid interrupt storms while the driver is processing one
+  interrupt.  The moderation value should be at least as large as the expected
+  time for the driver to process an interrupt. Multiqueue is off by default.
+
+  REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
+  found, the system will fallback to MSI or to Legacy interrupts.
+
+  LRO
+  ---
+  Large Receive Offload (LRO) is a technique for increasing inbound throughput
+  of high-bandwidth network connections by reducing CPU overhead. It works by
+  aggregating multiple incoming packets from a single stream into a larger
+  buffer before they are passed higher up the networking stack, thus reducing
+  the number of packets that have to be processed. LRO combines multiple
+  Ethernet frames into a single receive in the stack, thereby potentially
+  decreasing CPU utilization for receives.
+
+  NOTE: You need to have inet_lro enabled via either the CONFIG_INET_LRO or
+  CONFIG_INET_LRO_MODULE kernel config option. Additionally, if
+  CONFIG_INET_LRO_MODULE is used, the inet_lro module needs to be loaded
+  before the igb driver.
+
+  You can verify that the driver is using LRO by looking at these counters in
+  Ethtool:
+
+  lro_aggregated - count of total packets that were combined
+  lro_flushed - counts the number of packets flushed out of LRO
+  lro_no_desc - counts the number of times an LRO descriptor was not available
+  for the LRO packet
+
+  NOTE: IPv6 and UDP are not supported by LRO.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt
new file mode 100644
index 00000000000..056028138d9
--- /dev/null
+++ b/Documentation/networking/igbvf.txt
@@ -0,0 +1,78 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+This file describes the igbvf Linux* Base Driver for Intel Network Connection.
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV. SR-IOV requires the correct
+platform and OS support.
+
+The igbvf driver requires the igb driver, version 2.0 or later. The igbvf
+driver supports virtual functions generated by the igb driver with a max_vfs
+value of 1 or greater. For more information on the max_vfs parameter refer
+to the README included with the igb driver.
+
+The guest OS loading the igbvf driver must support MSI-X interrupts.
+
+This driver is only supported as a loadable module at this time.  Intel is
+not supplying patches against the kernel source to allow for static linking
+of the driver.  For questions related to hardware requirements, refer to the
+documentation supplied with your Intel Gigabit adapter.  All hardware
+requirements listed apply to use with Linux.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://downloadcenter.intel.com/scripts-df-external/Support_Intel.aspx
+
+Additional Configurations
+=========================
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.
+
+  http://sourceforge.net/projects/gkernel.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 61bc4e94311..26c0f9c0054 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,16 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_request_io changes (as of 2.6.36)
+   Instead of io_req_t, drivers are now requested to fill out
+   struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+   ranges. After a call to pcmcia_request_io(), the ports found there
+   are reserved, after calling pcmcia_request_configuration(), they may
+   be used.
+
+* No dev_info_t, no cs_types.h (as of 2.6.36)
+   dev_info_t and a few other typedefs are removed. No longer use them
+   in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
+   this file is gone.
+
 * No dev_node_t (as of 2.6.35)
    There is no more need to fill out a "dev_node_t" structure.
 
diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt
index deb35de7098..b66cb6d31d6 100644
--- a/Documentation/powerpc/dts-bindings/fsl/diu.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt
@@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also
 drive DVI monitors.
 
 Required properties:
-- compatible : should be "fsl-diu".
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
 - reg : should contain at least address and length of the DIU register
   set.
-- Interrupts : one DIU interrupt should be describe here.
+- interrupts : one DIU interrupt should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this device.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+  Data from the detailed timing descriptor will be used to
+  program the display controller.
 
 Example (MPC8610HPCD):
 	display@2c000 {
@@ -16,3 +23,12 @@ Example (MPC8610HPCD):
 		interrupts = <72 2>;
 		interrupt-parent = <&mpic>;
 	};
+
+Example for MPC5121:
+	display@2100 {
+		compatible = "fsl,mpc5121-diu";
+		reg = <0x2100 0x100>;
+		interrupts = <64 0x8>;
+		interrupt-parent = <&ipic>;
+		edid = [edid-data];
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index 50da2031058..1eacd6b20ed 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -20,6 +20,7 @@ Recommended properties :
  - fsl,preserve-clocking : boolean; if defined, the clock settings
    from the bootloader are preserved (not touched).
  - clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
 
 Examples :
 
@@ -59,4 +60,5 @@ Examples :
 		interrupts = <43 2>;
 		interrupt-parent = <&mpic>;
 		clock-frequency = <400000>;
+		fsl,timeout = <10000>;
 	};
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
deleted file mode 100644
index 9dbf4470c7e..00000000000
--- a/Documentation/slow-work.txt
+++ /dev/null
@@ -1,322 +0,0 @@
-		     ====================================
-		     SLOW WORK ITEM EXECUTION THREAD POOL
-		     ====================================
-
-By: David Howells <dhowells@redhat.com>
-
-The slow work item execution thread pool is a pool of threads for performing
-things that take a relatively long time, such as making mkdir calls.
-Typically, when processing something, these items will spend a lot of time
-blocking a thread on I/O, thus making that thread unavailable for doing other
-work.
-
-The standard workqueue model is unsuitable for this class of work item as that
-limits the owner to a single thread or a single thread per CPU.  For some
-tasks, however, more threads - or fewer - are required.
-
-There is just one pool per system.  It contains no threads unless something
-wants to use it - and that something must register its interest first.  When
-the pool is active, the number of threads it contains is dynamic, varying
-between a maximum and minimum setting, depending on the load.
-
-
-====================
-CLASSES OF WORK ITEM
-====================
-
-This pool support two classes of work items:
-
- (*) Slow work items.
-
- (*) Very slow work items.
-
-The former are expected to finish much quicker than the latter.
-
-An operation of the very slow class may do a batch combination of several
-lookups, mkdirs, and a create for instance.
-
-An operation of the ordinarily slow class may, for example, write stuff or
-expand files, provided the time taken to do so isn't too long.
-
-Operations of both types may sleep during execution, thus tying up the thread
-loaned to it.
-
-A further class of work item is available, based on the slow work item class:
-
- (*) Delayed slow work items.
-
-These are slow work items that have a timer to defer queueing of the item for
-a while.
-
-
-THREAD-TO-CLASS ALLOCATION
---------------------------
-
-Not all the threads in the pool are available to work on very slow work items.
-The number will be between one and one fewer than the number of active threads.
-This is configurable (see the "Pool Configuration" section).
-
-All the threads are available to work on ordinarily slow work items, but a
-percentage of the threads will prefer to work on very slow work items.
-
-The configuration ensures that at least one thread will be available to work on
-very slow work items, and at least one thread will be available that won't work
-on very slow work items at all.
-
-
-=====================
-USING SLOW WORK ITEMS
-=====================
-
-Firstly, a module or subsystem wanting to make use of slow work items must
-register its interest:
-
-	 int ret = slow_work_register_user(struct module *module);
-
-This will return 0 if successful, or a -ve error upon failure.  The module
-pointer should be the module interested in using this facility (almost
-certainly THIS_MODULE).
-
-
-Slow work items may then be set up by:
-
- (1) Declaring a slow_work struct type variable:
-
-	#include <linux/slow-work.h>
-
-	struct slow_work myitem;
-
- (2) Declaring the operations to be used for this item:
-
-	struct slow_work_ops myitem_ops = {
-		.get_ref = myitem_get_ref,
-		.put_ref = myitem_put_ref,
-		.execute = myitem_execute,
-	};
-
-     [*] For a description of the ops, see section "Item Operations".
-
- (3) Initialising the item:
-
-	slow_work_init(&myitem, &myitem_ops);
-
-     or:
-
-	delayed_slow_work_init(&myitem, &myitem_ops);
-
-     or:
-
-	vslow_work_init(&myitem, &myitem_ops);
-
-     depending on its class.
-
-A suitably set up work item can then be enqueued for processing:
-
-	int ret = slow_work_enqueue(&myitem);
-
-This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise, or (for delayed work):
-
-	int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
-
-
-The items are reference counted, so there ought to be no need for a flush
-operation.  But as the reference counting is optional, means to cancel
-existing work items are also included:
-
-	cancel_slow_work(&myitem);
-	cancel_delayed_slow_work(&myitem);
-
-can be used to cancel pending work.  The above cancel function waits for
-existing work to have been executed (or prevent execution of them, depending
-on timing).
-
-
-When all a module's slow work items have been processed, and the
-module has no further interest in the facility, it should unregister its
-interest:
-
-	slow_work_unregister_user(struct module *module);
-
-The module pointer is used to wait for all outstanding work items for that
-module before completing the unregistration.  This prevents the put_ref() code
-from being taken away before it completes.  module should almost certainly be
-THIS_MODULE.
-
-
-================
-HELPER FUNCTIONS
-================
-
-The slow-work facility provides a function by which it can be determined
-whether or not an item is queued for later execution:
-
-	bool queued = slow_work_is_queued(struct slow_work *work);
-
-If it returns false, then the item is not on the queue (it may be executing
-with a requeue pending).  This can be used to work out whether an item on which
-another depends is on the queue, thus allowing a dependent item to be queued
-after it.
-
-If the above shows an item on which another depends not to be queued, then the
-owner of the dependent item might need to wait.  However, to avoid locking up
-the threads unnecessarily be sleeping in them, it can make sense under some
-circumstances to return the work item to the queue, thus deferring it until
-some other items have had a chance to make use of the yielded thread.
-
-To yield a thread and defer an item, the work function should simply enqueue
-the work item again and return.  However, this doesn't work if there's nothing
-actually on the queue, as the thread just vacated will jump straight back into
-the item's work function, thus busy waiting on a CPU.
-
-Instead, the item should use the thread to wait for the dependency to go away,
-but rather than using schedule() or schedule_timeout() to sleep, it should use
-the following function:
-
-	bool requeue = slow_work_sleep_till_thread_needed(
-			struct slow_work *work,
-			signed long *_timeout);
-
-This will add a second wait and then sleep, such that it will be woken up if
-either something appears on the queue that could usefully make use of the
-thread - and behind which this item can be queued, or if the event the caller
-set up to wait for happens.  True will be returned if something else appeared
-on the queue and this work function should perhaps return, of false if
-something else woke it up.  The timeout is as for schedule_timeout().
-
-For example:
-
-	wq = bit_waitqueue(&my_flags, MY_BIT);
-	init_wait(&wait);
-	requeue = false;
-	do {
-		prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
-		if (!test_bit(MY_BIT, &my_flags))
-			break;
-		requeue = slow_work_sleep_till_thread_needed(&my_work,
-							     &timeout);
-	} while (timeout > 0 && !requeue);
-	finish_wait(wq, &wait);
-	if (!test_bit(MY_BIT, &my_flags)
-		goto do_my_thing;
-	if (requeue)
-		return; // to slow_work
-
-
-===============
-ITEM OPERATIONS
-===============
-
-Each work item requires a table of operations of type struct slow_work_ops.
-Only ->execute() is required; the getting and putting of a reference and the
-describing of an item are all optional.
-
- (*) Get a reference on an item:
-
-	int (*get_ref)(struct slow_work *work);
-
-     This allows the thread pool to attempt to pin an item by getting a
-     reference on it.  This function should return 0 if the reference was
-     granted, or a -ve error otherwise.  If an error is returned,
-     slow_work_enqueue() will fail.
-
-     The reference is held whilst the item is queued and whilst it is being
-     executed.  The item may then be requeued with the same reference held, or
-     the reference will be released.
-
- (*) Release a reference on an item:
-
-	void (*put_ref)(struct slow_work *work);
-
-     This allows the thread pool to unpin an item by releasing the reference on
-     it.  The thread pool will not touch the item again once this has been
-     called.
-
- (*) Execute an item:
-
-	void (*execute)(struct slow_work *work);
-
-     This should perform the work required of the item.  It may sleep, it may
-     perform disk I/O and it may wait for locks.
-
- (*) View an item through /proc:
-
-	void (*desc)(struct slow_work *work, struct seq_file *m);
-
-     If supplied, this should print to 'm' a small string describing the work
-     the item is to do.  This should be no more than about 40 characters, and
-     shouldn't include a newline character.
-
-     See the 'Viewing executing and queued items' section below.
-
-
-==================
-POOL CONFIGURATION
-==================
-
-The slow-work thread pool has a number of configurables:
-
- (*) /proc/sys/kernel/slow-work/min-threads
-
-     The minimum number of threads that should be in the pool whilst it is in
-     use.  This may be anywhere between 2 and max-threads.
-
- (*) /proc/sys/kernel/slow-work/max-threads
-
-     The maximum number of threads that should in the pool.  This may be
-     anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater.
-
- (*) /proc/sys/kernel/slow-work/vslow-percentage
-
-     The percentage of active threads in the pool that may be used to execute
-     very slow work items.  This may be between 1 and 99.  The resultant number
-     is bounded to between 1 and one fewer than the number of active threads.
-     This ensures there is always at least one thread that can process very
-     slow work items, and always at least one thread that won't.
-
-
-==================================
-VIEWING EXECUTING AND QUEUED ITEMS
-==================================
-
-If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
-
-	/sys/kernel/debug/slow_work/runqueue
-
-through which the list of work items being executed and the queues of items to
-be executed may be viewed.  The owner of a work item is given the chance to
-add some information of its own.
-
-The contents look something like the following:
-
-    THR PID   ITEM ADDR        FL MARK  DESC
-    === ===== ================ == ===== ==========
-      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
-      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
-      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
-      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
-      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
-      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
-      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
-      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
-    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
-    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
-    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
-    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
-    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
-    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
-    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
-    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
-    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
-    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
-    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
-    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
-    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
-    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
-
-In the 'THR' column, executing items show the thread they're occupying and
-queued threads indicate which queue they're on.  'PID' shows the process ID of
-a slow-work thread that's executing something.  'FL' shows the work item flags.
-'MARK' indicates how long since an item was queued or began executing.  Lastly,
-the 'DESC' column permits the owner of an item to give some information.
-
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 1d38b0dfba9..03771d7c5dd 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -114,6 +114,11 @@ ALC662/663/272
   samsung-nc10	Samsung NC10 mini notebook
   auto		auto-config reading BIOS (default)
 
+ALC680
+======
+  base		Base model (ASUS NX90)
+  auto		auto-config reading BIOS (default)
+
 ALC882/883/885/888/889
 ======================
   3stack-dig	3-jack with SPDIF I/O
@@ -282,6 +287,7 @@ Conexant 5051
   hp		HP Spartan laptop
   hp-dv6736	HP dv6736
   hp-f700	HP Compaq Presario F700
+  ideapad	Lenovo IdeaPad laptop
   lenovo-x200	Lenovo X200 laptop
   toshiba	Toshiba Satellite M300
 
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 07301de12cc..7fcd1ad96fc 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -103,6 +103,8 @@ card*/pcm*/xrun_debug
 	  bit 2 = Enable additional jiffies check
 	  bit 3 = Log hwptr update at each period interrupt
 	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
+	  bit 5 = Show last 10 positions on error
+	  bit 6 = Do above only once
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -122,6 +124,12 @@ card*/pcm*/xrun_debug
 	Bits 3 and 4 are for logging the hwptr records.  Note that
 	these will give flood of kernel messages.
 
+	When bit 5 is set, the driver logs the last 10 xrun errors and
+	the proc file shows each jiffies, position, period_size,
+	buffer_size, old_hw_ptr, and hw_ptr_base values.
+
+	When bit 6 is set, the full xrun log is shown only once.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt
new file mode 100644
index 00000000000..0fa40679b08
--- /dev/null
+++ b/Documentation/sound/alsa/alsa-parameters.txt
@@ -0,0 +1,135 @@
+                          ALSA Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	snd-ad1816a=	[HW,ALSA]
+
+	snd-ad1848=	[HW,ALSA]
+
+	snd-ali5451=	[HW,ALSA]
+
+	snd-als100=	[HW,ALSA]
+
+	snd-als4000=	[HW,ALSA]
+
+	snd-azt2320=	[HW,ALSA]
+
+	snd-cmi8330=	[HW,ALSA]
+
+	snd-cmipci=	[HW,ALSA]
+
+	snd-cs4231=	[HW,ALSA]
+
+	snd-cs4232=	[HW,ALSA]
+
+	snd-cs4236=	[HW,ALSA]
+
+	snd-cs4281=	[HW,ALSA]
+
+	snd-cs46xx=	[HW,ALSA]
+
+	snd-dt019x=	[HW,ALSA]
+
+	snd-dummy=	[HW,ALSA]
+
+	snd-emu10k1=	[HW,ALSA]
+
+	snd-ens1370=	[HW,ALSA]
+
+	snd-ens1371=	[HW,ALSA]
+
+	snd-es968=	[HW,ALSA]
+
+	snd-es1688=	[HW,ALSA]
+
+	snd-es18xx=	[HW,ALSA]
+
+	snd-es1938=	[HW,ALSA]
+
+	snd-es1968=	[HW,ALSA]
+
+	snd-fm801=	[HW,ALSA]
+
+	snd-gusclassic=	[HW,ALSA]
+
+	snd-gusextreme=	[HW,ALSA]
+
+	snd-gusmax=	[HW,ALSA]
+
+	snd-hdsp=	[HW,ALSA]
+
+	snd-ice1712=	[HW,ALSA]
+
+	snd-intel8x0=	[HW,ALSA]
+
+	snd-interwave=	[HW,ALSA]
+
+	snd-interwave-stb=
+			[HW,ALSA]
+
+	snd-korg1212=	[HW,ALSA]
+
+	snd-maestro3=	[HW,ALSA]
+
+	snd-mpu401=	[HW,ALSA]
+
+	snd-mtpav=	[HW,ALSA]
+
+	snd-nm256=	[HW,ALSA]
+
+	snd-opl3sa2=	[HW,ALSA]
+
+	snd-opti92x-ad1848=
+			[HW,ALSA]
+
+	snd-opti92x-cs4231=
+			[HW,ALSA]
+
+	snd-opti93x=	[HW,ALSA]
+
+	snd-pmac=	[HW,ALSA]
+
+	snd-rme32=	[HW,ALSA]
+
+	snd-rme96=	[HW,ALSA]
+
+	snd-rme9652=	[HW,ALSA]
+
+	snd-sb8=	[HW,ALSA]
+
+	snd-sb16=	[HW,ALSA]
+
+	snd-sbawe=	[HW,ALSA]
+
+	snd-serial=	[HW,ALSA]
+
+	snd-sgalaxy=	[HW,ALSA]
+
+	snd-sonicvibes=	[HW,ALSA]
+
+	snd-sun-amd7930=
+			[HW,ALSA]
+
+	snd-sun-cs4231=	[HW,ALSA]
+
+	snd-trident=	[HW,ALSA]
+
+	snd-usb-audio=	[HW,ALSA,USB]
+
+	snd-via82xx=	[HW,ALSA]
+
+	snd-virmidi=	[HW,ALSA]
+
+	snd-wavefront=	[HW,ALSA]
+
+	snd-ymfpci=	[HW,ALSA]
diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt
new file mode 100644
index 00000000000..3ab391e7c29
--- /dev/null
+++ b/Documentation/sound/oss/oss-parameters.txt
@@ -0,0 +1,51 @@
+                          OSS Kernel Parameters
+                          ~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+	ad1848=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>,<type>
+
+	aedsp16=	[HW,OSS] Audio Excel DSP 16
+			Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
+			See also header of sound/oss/aedsp16.c.
+
+	dmasound=	[HW,OSS] Sound subsystem buffers
+
+	mpu401=		[HW,OSS]
+			Format: <io>,<irq>
+
+	opl3=		[HW,OSS]
+			Format: <io>
+
+	pas2=		[HW,OSS] Format:
+			<io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
+	pss=		[HW,OSS] Personal Sound System (ECHO ESC614)
+			Format:
+			<io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+
+	sscape=		[HW,OSS]
+			Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
+
+	trix=		[HW,OSS] MediaTrix AudioTrix Pro
+			Format:
+			<io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
+	uart401=	[HW,OSS]
+			Format: <io>,<irq>
+
+	uart6850=	[HW,OSS]
+			Format: <io>,<irq>
+
+	waveartist=	[HW,OSS]
+			Format: <io>,<irq>,<dma>,<dma2>
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 82b2da18c45..b606c2c4dd3 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -511,7 +511,7 @@ information may not be desired.
 If this is set to non-zero, this information is shown whenever the
 OOM killer actually kills a memory-hogging task.
 
-The default value is 0.
+The default value is 1 (enabled).
 
 ==============================================================
 
diff --git a/Documentation/timers/timers-howto.txt b/Documentation/timers/timers-howto.txt
new file mode 100644
index 00000000000..c9ef29d2ede
--- /dev/null
+++ b/Documentation/timers/timers-howto.txt
@@ -0,0 +1,105 @@
+delays - Information on the various kernel delay / sleep mechanisms
+-------------------------------------------------------------------
+
+This document seeks to answer the common question: "What is the
+RightWay (TM) to insert a delay?"
+
+This question is most often faced by driver writers who have to
+deal with hardware delays and who may not be the most intimately
+familiar with the inner workings of the Linux Kernel.
+
+
+Inserting Delays
+----------------
+
+The first, and most important, question you need to ask is "Is my
+code in an atomic context?"  This should be followed closely by "Does
+it really need to delay in atomic context?" If so...
+
+ATOMIC CONTEXT:
+	You must use the *delay family of functions. These
+	functions use the jiffie estimation of clock speed
+	and will busy wait for enough loop cycles to achieve
+	the desired delay:
+
+	ndelay(unsigned long nsecs)
+	udelay(unsigned long usecs)
+	mdelay(unsgined long msecs)
+
+	udelay is the generally preferred API; ndelay-level
+	precision may not actually exist on many non-PC devices.
+
+	mdelay is macro wrapper around udelay, to account for
+	possible overflow when passing large arguments to udelay.
+	In general, use of mdelay is discouraged and code should
+	be refactored to allow for the use of msleep.
+
+NON-ATOMIC CONTEXT:
+	You should use the *sleep[_range] family of functions.
+	There are a few more options here, while any of them may
+	work correctly, using the "right" sleep function will
+	help the scheduler, power management, and just make your
+	driver better :)
+
+	-- Backed by busy-wait loop:
+		udelay(unsigned long usecs)
+	-- Backed by hrtimers:
+		usleep_range(unsigned long min, unsigned long max)
+	-- Backed by jiffies / legacy_timers
+		msleep(unsigned long msecs)
+		msleep_interruptible(unsigned long msecs)
+
+	Unlike the *delay family, the underlying mechanism
+	driving each of these calls varies, thus there are
+	quirks you should be aware of.
+
+
+	SLEEPING FOR "A FEW" USECS ( < ~10us? ):
+		* Use udelay
+
+		- Why not usleep?
+			On slower systems, (embedded, OR perhaps a speed-
+			stepped PC!) the overhead of setting up the hrtimers
+			for usleep *may* not be worth it. Such an evaluation
+			will obviously depend on your specific situation, but
+			it is something to be aware of.
+
+	SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms):
+		* Use usleep_range
+
+		- Why not msleep for (1ms - 20ms)?
+			Explained originally here:
+				http://lkml.org/lkml/2007/8/3/250
+			msleep(1~20) may not do what the caller intends, and
+			will often sleep longer (~20 ms actual sleep for any
+			value given in the 1~20ms range). In many cases this
+			is not the desired behavior.
+
+		- Why is there no "usleep" / What is a good range?
+			Since usleep_range is built on top of hrtimers, the
+			wakeup will be very precise (ish), thus a simple
+			usleep function would likely introduce a large number
+			of undesired interrupts.
+
+			With the introduction of a range, the scheduler is
+			free to coalesce your wakeup with any other wakeup
+			that may have happened for other reasons, or at the
+			worst case, fire an interrupt for your upper bound.
+
+			The larger a range you supply, the greater a chance
+			that you will not trigger an interrupt; this should
+			be balanced with what is an acceptable upper bound on
+			delay / performance for your specific code path. Exact
+			tolerances here are very situation specific, thus it
+			is left to the caller to determine a reasonable range.
+
+	SLEEPING FOR LARGER MSECS ( 10ms+ )
+		* Use msleep or possibly msleep_interruptible
+
+		- What's the difference?
+			msleep sets the current task to TASK_UNINTERRUPTIBLE
+			whereas msleep_interruptible sets the current task to
+			TASK_INTERRUPTIBLE before scheduling the sleep. In
+			short, the difference is whether the sleep can be ended
+			early by a signal. In general, just use msleep unless
+			you know you have a need for the interruptible variant.
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index f1f81afee8a..dc52bd442c9 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -13,6 +13,9 @@ Note that this focuses on architecture implementation details only.  If you
 want more explanation of a feature in terms of common code, review the common
 ftrace.txt file.
 
+Ideally, everyone who wishes to retain performance while supporting tracing in
+their kernel should make it all the way to dynamic ftrace support.
+
 
 Prerequisites
 -------------
@@ -215,7 +218,7 @@ An arch may pass in a unique value (frame pointer) to both the entering and
 exiting of a function.  On exit, the value is compared and if it does not
 match, then it will panic the kernel.  This is largely a sanity check for bad
 code generation with gcc.  If gcc for your port sanely updates the frame
-pointer under different opitmization levels, then ignore this option.
+pointer under different optimization levels, then ignore this option.
 
 However, adding support for it isn't terribly difficult.  In your assembly code
 that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
@@ -234,7 +237,7 @@ If you can't trace NMI functions, then skip this option.
 
 
 HAVE_SYSCALL_TRACEPOINTS
----------------------
+------------------------
 
 You need very few things to get the syscalls tracing in an arch.
 
@@ -250,12 +253,152 @@ You need very few things to get the syscalls tracing in an arch.
 HAVE_FTRACE_MCOUNT_RECORD
 -------------------------
 
-See scripts/recordmcount.pl for more info.
+See scripts/recordmcount.pl for more info.  Just fill in the arch-specific
+details for how to locate the addresses of mcount call sites via objdump.
+This option doesn't make much sense without also implementing dynamic ftrace.
 
+
+HAVE_DYNAMIC_FTRACE
+-------------------
+
+You will first need HAVE_FTRACE_MCOUNT_RECORD and HAVE_FUNCTION_TRACER, so
+scroll your reader back up if you got over eager.
+
+Once those are out of the way, you will need to implement:
+	- asm/ftrace.h:
+		- MCOUNT_ADDR
+		- ftrace_call_adjust()
+		- struct dyn_arch_ftrace{}
+	- asm code:
+		- mcount() (new stub)
+		- ftrace_caller()
+		- ftrace_call()
+		- ftrace_stub()
+	- C code:
+		- ftrace_dyn_arch_init()
+		- ftrace_make_nop()
+		- ftrace_make_call()
+		- ftrace_update_ftrace_func()
+
+First you will need to fill out some arch details in your asm/ftrace.h.
+
+Define MCOUNT_ADDR as the address of your mcount symbol similar to:
+	#define MCOUNT_ADDR ((unsigned long)mcount)
+Since no one else will have a decl for that function, you will need to:
+	extern void mcount(void);
+
+You will also need the helper function ftrace_call_adjust().  Most people
+will be able to stub it out like so:
+	static inline unsigned long ftrace_call_adjust(unsigned long addr)
+	{
+		return addr;
+	}
 <details to be filled>
 
+Lastly you will need the custom dyn_arch_ftrace structure.  If you need
+some extra state when runtime patching arbitrary call sites, this is the
+place.  For now though, create an empty struct:
+	struct dyn_arch_ftrace {
+		/* No extra data needed */
+	};
+
+With the header out of the way, we can fill out the assembly code.  While we
+did already create a mcount() function earlier, dynamic ftrace only wants a
+stub function.  This is because the mcount() will only be used during boot
+and then all references to it will be patched out never to return.  Instead,
+the guts of the old mcount() will be used to create a new ftrace_caller()
+function.  Because the two are hard to merge, it will most likely be a lot
+easier to have two separate definitions split up by #ifdefs.  Same goes for
+the ftrace_stub() as that will now be inlined in ftrace_caller().
+
+Before we get confused anymore, let's check out some pseudo code so you can
+implement your own stuff in assembly:
 
-HAVE_DYNAMIC_FTRACE
----------------------
+void mcount(void)
+{
+	return;
+}
+
+void ftrace_caller(void)
+{
+	/* implement HAVE_FUNCTION_TRACE_MCOUNT_TEST if you desire */
+
+	/* save all state needed by the ABI (see paragraph above) */
+
+	unsigned long frompc = ...;
+	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+
+ftrace_call:
+	ftrace_stub(frompc, selfpc);
+
+	/* restore all state needed by the ABI */
+
+ftrace_stub:
+	return;
+}
+
+This might look a little odd at first, but keep in mind that we will be runtime
+patching multiple things.  First, only functions that we actually want to trace
+will be patched to call ftrace_caller().  Second, since we only have one tracer
+active at a time, we will patch the ftrace_caller() function itself to call the
+specific tracer in question.  That is the point of the ftrace_call label.
+
+With that in mind, let's move on to the C code that will actually be doing the
+runtime patching.  You'll need a little knowledge of your arch's opcodes in
+order to make it through the next section.
+
+Every arch has an init callback function.  If you need to do something early on
+to initialize some state, this is the time to do that.  Otherwise, this simple
+function below should be sufficient for most people:
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* return value is done indirectly via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+
+There are two functions that are used to do runtime patching of arbitrary
+functions.  The first is used to turn the mcount call site into a nop (which
+is what helps us retain runtime performance when not tracing).  The second is
+used to turn the mcount call site into a call to an arbitrary location (but
+typically that is ftracer_caller()).  See the general function definition in
+linux/ftrace.h for the functions:
+	ftrace_make_nop()
+	ftrace_make_call()
+The rec->ip value is the address of the mcount call site that was collected
+by the scripts/recordmcount.pl during build time.
+
+The last function is used to do runtime patching of the active tracer.  This
+will be modifying the assembly code at the location of the ftrace_call symbol
+inside of the ftrace_caller() function.  So you should have sufficient padding
+at that location to support the new function calls you'll be inserting.  Some
+people will be using a "call" type instruction while others will be using a
+"branch" type instruction.  Specifically, the function is:
+	ftrace_update_ftrace_func()
+
+
+HAVE_DYNAMIC_FTRACE + HAVE_FUNCTION_GRAPH_TRACER
+------------------------------------------------
+
+The function grapher needs a few tweaks in order to work with dynamic ftrace.
+Basically, you will need to:
+	- update:
+		- ftrace_caller()
+		- ftrace_graph_call()
+		- ftrace_graph_caller()
+	- implement:
+		- ftrace_enable_ftrace_graph_caller()
+		- ftrace_disable_ftrace_graph_caller()
 
 <details to be filled>
+Quick notes:
+	- add a nop stub after the ftrace_call location named ftrace_graph_call;
+	  stub needs to be large enough to support a call to ftrace_graph_caller()
+	- update ftrace_graph_caller() to work with being called by the new
+	  ftrace_caller() since some semantics may have changed
+	- ftrace_enable_ftrace_graph_caller() will runtime patch the
+	  ftrace_graph_call location with a call to ftrace_graph_caller()
+	- ftrace_disable_ftrace_graph_caller() will runtime patch the
+	  ftrace_graph_call location with nops
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
deleted file mode 100644
index 6308735e58c..00000000000
--- a/Documentation/trace/kmemtrace.txt
+++ /dev/null
@@ -1,126 +0,0 @@
-			kmemtrace - Kernel Memory Tracer
-
-			  by Eduard - Gabriel Munteanu
-			     <eduard.munteanu@linux360.ro>
-
-I. Introduction
-===============
-
-kmemtrace helps kernel developers figure out two things:
-1) how different allocators (SLAB, SLUB etc.) perform
-2) how kernel code allocates memory and how much
-
-To do this, we trace every allocation and export information to the userspace
-through the relay interface. We export things such as the number of requested
-bytes, the number of bytes actually allocated (i.e. including internal
-fragmentation), whether this is a slab allocation or a plain kmalloc() and so
-on.
-
-The actual analysis is performed by a userspace tool (see section III for
-details on where to get it from). It logs the data exported by the kernel,
-processes it and (as of writing this) can provide the following information:
-- the total amount of memory allocated and fragmentation per call-site
-- the amount of memory allocated and fragmentation per allocation
-- total memory allocated and fragmentation in the collected dataset
-- number of cross-CPU allocation and frees (makes sense in NUMA environments)
-
-Moreover, it can potentially find inconsistent and erroneous behavior in
-kernel code, such as using slab free functions on kmalloc'ed memory or
-allocating less memory than requested (but not truly failed allocations).
-
-kmemtrace also makes provisions for tracing on some arch and analysing the
-data on another.
-
-II. Design and goals
-====================
-
-kmemtrace was designed to handle rather large amounts of data. Thus, it uses
-the relay interface to export whatever is logged to userspace, which then
-stores it. Analysis and reporting is done asynchronously, that is, after the
-data is collected and stored. By design, it allows one to log and analyse
-on different machines and different arches.
-
-As of writing this, the ABI is not considered stable, though it might not
-change much. However, no guarantees are made about compatibility yet. When
-deemed stable, the ABI should still allow easy extension while maintaining
-backward compatibility. This is described further in Documentation/ABI.
-
-Summary of design goals:
-	- allow logging and analysis to be done across different machines
-	- be fast and anticipate usage in high-load environments (*)
-	- be reasonably extensible
-	- make it possible for GNU/Linux distributions to have kmemtrace
-	included in their repositories
-
-(*) - one of the reasons Pekka Enberg's original userspace data analysis
-    tool's code was rewritten from Perl to C (although this is more than a
-    simple conversion)
-
-
-III. Quick usage guide
-======================
-
-1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
-CONFIG_KMEMTRACE).
-
-2) Get the userspace tool and build it:
-$ git clone git://repo.or.cz/kmemtrace-user.git		# current repository
-$ cd kmemtrace-user/
-$ ./autogen.sh
-$ ./configure
-$ make
-
-3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
-'single' runlevel (so that relay buffers don't fill up easily), and run
-kmemtrace:
-# '$' does not mean user, but root here.
-$ mount -t debugfs none /sys/kernel/debug
-$ mount -t proc none /proc
-$ cd path/to/kmemtrace-user/
-$ ./kmemtraced
-Wait a bit, then stop it with CTRL+C.
-$ cat /sys/kernel/debug/kmemtrace/total_overruns	# Check if we didn't
-							# overrun, should
-							# be zero.
-$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
-		check its correctness]
-$ ./kmemtrace-report
-
-Now you should have a nice and short summary of how the allocator performs.
-
-IV. FAQ and known issues
-========================
-
-Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
-this? Should I worry?
-A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
-large the number is. You can fix it by supplying a higher
-'kmemtrace.subbufs=N' kernel parameter.
----
-
-Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
-A: This is a bug and should be reported. It can occur for a variety of
-reasons:
-	- possible bugs in relay code
-	- possible misuse of relay by kmemtrace
-	- timestamps being collected unorderly
-Or you may fix it yourself and send us a patch.
----
-
-Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
-A: This is a known issue and I'm working on it. These might be true errors
-in kernel code, which may have inconsistent behavior (e.g. allocating memory
-with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
-out this behavior may work with SLAB, but may fail with other allocators.
-
-It may also be due to lack of tracing in some unusual allocator functions.
-
-We don't want bug reports regarding this issue yet.
----
-
-V. See also
-===========
-
-Documentation/kernel-parameters.txt
-Documentation/ABI/testing/debugfs-kmemtrace
-
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index ec94748ae65..5f77d94598d 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -42,7 +42,7 @@ Synopsis of kprobe_events
   +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
   NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
   FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
-		  (u8/u16/u32/u64/s8/s16/s32/s64) are supported.
+		  (u8/u16/u32/u64/s8/s16/s32/s64) and string are supported.
 
   (*) only for return probe.
   (**) this is useful for fetching a field of data structures.
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
new file mode 100644
index 00000000000..1b55146d1c8
--- /dev/null
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -0,0 +1,686 @@
+#!/usr/bin/perl
+# This is a POC for reading the text representation of trace output related to
+# page reclaim. It makes an attempt to extract some high-level information on
+# what is going on. The accuracy of the parser may vary
+#
+# Example usage: trace-vmscan-postprocess.pl < /sys/kernel/debug/tracing/trace_pipe
+# other options
+#   --read-procstat	If the trace lacks process info, get it from /proc
+#   --ignore-pid	Aggregate processes of the same name together
+#
+# Copyright (c) IBM Corporation 2009
+# Author: Mel Gorman <mel@csn.ul.ie>
+use strict;
+use Getopt::Long;
+
+# Tracepoint events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN	=> 1;
+use constant MM_VMSCAN_DIRECT_RECLAIM_END	=> 2;
+use constant MM_VMSCAN_KSWAPD_WAKE		=> 3;
+use constant MM_VMSCAN_KSWAPD_SLEEP		=> 4;
+use constant MM_VMSCAN_LRU_SHRINK_ACTIVE	=> 5;
+use constant MM_VMSCAN_LRU_SHRINK_INACTIVE	=> 6;
+use constant MM_VMSCAN_LRU_ISOLATE		=> 7;
+use constant MM_VMSCAN_WRITEPAGE_FILE_SYNC	=> 8;
+use constant MM_VMSCAN_WRITEPAGE_ANON_SYNC	=> 9;
+use constant MM_VMSCAN_WRITEPAGE_FILE_ASYNC	=> 10;
+use constant MM_VMSCAN_WRITEPAGE_ANON_ASYNC	=> 11;
+use constant MM_VMSCAN_WRITEPAGE_ASYNC		=> 12;
+use constant EVENT_UNKNOWN			=> 13;
+
+# Per-order events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER => 11;
+use constant MM_VMSCAN_WAKEUP_KSWAPD_PERORDER 	=> 12;
+use constant MM_VMSCAN_KSWAPD_WAKE_PERORDER	=> 13;
+use constant HIGH_KSWAPD_REWAKEUP_PERORDER	=> 14;
+
+# Constants used to track state
+use constant STATE_DIRECT_BEGIN 		=> 15;
+use constant STATE_DIRECT_ORDER 		=> 16;
+use constant STATE_KSWAPD_BEGIN			=> 17;
+use constant STATE_KSWAPD_ORDER			=> 18;
+
+# High-level events extrapolated from tracepoints
+use constant HIGH_DIRECT_RECLAIM_LATENCY	=> 19;
+use constant HIGH_KSWAPD_LATENCY		=> 20;
+use constant HIGH_KSWAPD_REWAKEUP		=> 21;
+use constant HIGH_NR_SCANNED			=> 22;
+use constant HIGH_NR_TAKEN			=> 23;
+use constant HIGH_NR_RECLAIM			=> 24;
+use constant HIGH_NR_CONTIG_DIRTY		=> 25;
+
+my %perprocesspid;
+my %perprocess;
+my %last_procmap;
+my $opt_ignorepid;
+my $opt_read_procstat;
+
+my $total_wakeup_kswapd;
+my ($total_direct_reclaim, $total_direct_nr_scanned);
+my ($total_direct_latency, $total_kswapd_latency);
+my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async);
+my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async);
+my ($total_kswapd_nr_scanned, $total_kswapd_wake);
+my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async);
+my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async);
+
+# Catch sigint and exit on request
+my $sigint_report = 0;
+my $sigint_exit = 0;
+my $sigint_pending = 0;
+my $sigint_received = 0;
+sub sigint_handler {
+	my $current_time = time;
+	if ($current_time - 2 > $sigint_received) {
+		print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
+		$sigint_report = 1;
+	} else {
+		if (!$sigint_exit) {
+			print "Second SIGINT received quickly, exiting\n";
+		}
+		$sigint_exit++;
+	}
+
+	if ($sigint_exit > 3) {
+		print "Many SIGINTs received, exiting now without report\n";
+		exit;
+	}
+
+	$sigint_received = $current_time;
+	$sigint_pending = 1;
+}
+$SIG{INT} = "sigint_handler";
+
+# Parse command line options
+GetOptions(
+	'ignore-pid'	 =>	\$opt_ignorepid,
+	'read-procstat'	 =>	\$opt_read_procstat,
+);
+
+# Defaults for dynamically discovered regex's
+my $regex_direct_begin_default = 'order=([0-9]*) may_writepage=([0-9]*) gfp_flags=([A-Z_|]*)';
+my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
+my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
+my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
+my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
+my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
+my $regex_lru_shrink_inactive_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*)';
+my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
+my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
+
+# Dyanically discovered regex
+my $regex_direct_begin;
+my $regex_direct_end;
+my $regex_kswapd_wake;
+my $regex_kswapd_sleep;
+my $regex_wakeup_kswapd;
+my $regex_lru_isolate;
+my $regex_lru_shrink_inactive;
+my $regex_lru_shrink_active;
+my $regex_writepage;
+
+# Static regex used. Specified like this for readability and for use with /o
+#                      (process_pid)     (cpus      )   ( time  )   (tpoint    ) (details)
+my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
+my $regex_statname = '[-0-9]*\s\((.*)\).*';
+my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
+
+sub generate_traceevent_regex {
+	my $event = shift;
+	my $default = shift;
+	my $regex;
+
+	# Read the event format or use the default
+	if (!open (FORMAT, "/sys/kernel/debug/tracing/events/$event/format")) {
+		print("WARNING: Event $event format string not found\n");
+		return $default;
+	} else {
+		my $line;
+		while (!eof(FORMAT)) {
+			$line = <FORMAT>;
+			$line =~ s/, REC->.*//;
+			if ($line =~ /^print fmt:\s"(.*)".*/) {
+				$regex = $1;
+				$regex =~ s/%s/\([0-9a-zA-Z|_]*\)/g;
+				$regex =~ s/%p/\([0-9a-f]*\)/g;
+				$regex =~ s/%d/\([-0-9]*\)/g;
+				$regex =~ s/%ld/\([-0-9]*\)/g;
+				$regex =~ s/%lu/\([0-9]*\)/g;
+			}
+		}
+	}
+
+	# Can't handle the print_flags stuff but in the context of this
+	# script, it really doesn't matter
+	$regex =~ s/\(REC.*\) \? __print_flags.*//;
+
+	# Verify fields are in the right order
+	my $tuple;
+	foreach $tuple (split /\s/, $regex) {
+		my ($key, $value) = split(/=/, $tuple);
+		my $expected = shift;
+		if ($key ne $expected) {
+			print("WARNING: Format not as expected for event $event '$key' != '$expected'\n");
+			$regex =~ s/$key=\((.*)\)/$key=$1/;
+		}
+	}
+
+	if (defined shift) {
+		die("Fewer fields than expected in format");
+	}
+
+	return $regex;
+}
+
+$regex_direct_begin = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_begin",
+			$regex_direct_begin_default,
+			"order", "may_writepage",
+			"gfp_flags");
+$regex_direct_end = generate_traceevent_regex(
+			"vmscan/mm_vmscan_direct_reclaim_end",
+			$regex_direct_end_default,
+			"nr_reclaimed");
+$regex_kswapd_wake = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_wake",
+			$regex_kswapd_wake_default,
+			"nid", "order");
+$regex_kswapd_sleep = generate_traceevent_regex(
+			"vmscan/mm_vmscan_kswapd_sleep",
+			$regex_kswapd_sleep_default,
+			"nid");
+$regex_wakeup_kswapd = generate_traceevent_regex(
+			"vmscan/mm_vmscan_wakeup_kswapd",
+			$regex_wakeup_kswapd_default,
+			"nid", "zid", "order");
+$regex_lru_isolate = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_isolate",
+			$regex_lru_isolate_default,
+			"isolate_mode", "order",
+			"nr_requested", "nr_scanned", "nr_taken",
+			"contig_taken", "contig_dirty", "contig_failed");
+$regex_lru_shrink_inactive = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_inactive",
+			$regex_lru_shrink_inactive_default,
+			"nid", "zid",
+			"lru",
+			"nr_scanned", "nr_reclaimed", "priority");
+$regex_lru_shrink_active = generate_traceevent_regex(
+			"vmscan/mm_vmscan_lru_shrink_active",
+			$regex_lru_shrink_active_default,
+			"nid", "zid",
+			"lru",
+			"nr_scanned", "nr_rotated", "priority");
+$regex_writepage = generate_traceevent_regex(
+			"vmscan/mm_vmscan_writepage",
+			$regex_writepage_default,
+			"page", "pfn", "flags");
+
+sub read_statline($) {
+	my $pid = $_[0];
+	my $statline;
+
+	if (open(STAT, "/proc/$pid/stat")) {
+		$statline = <STAT>;
+		close(STAT);
+	}
+
+	if ($statline eq '') {
+		$statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
+	}
+
+	return $statline;
+}
+
+sub guess_process_pid($$) {
+	my $pid = $_[0];
+	my $statline = $_[1];
+
+	if ($pid == 0) {
+		return "swapper-0";
+	}
+
+	if ($statline !~ /$regex_statname/o) {
+		die("Failed to math stat line for process name :: $statline");
+	}
+	return "$1-$pid";
+}
+
+# Convert sec.usec timestamp format
+sub timestamp_to_ms($) {
+	my $timestamp = $_[0];
+
+	my ($sec, $usec) = split (/\./, $timestamp);
+	return ($sec * 1000) + ($usec / 1000);
+}
+
+sub process_events {
+	my $traceevent;
+	my $process_pid;
+	my $cpus;
+	my $timestamp;
+	my $tracepoint;
+	my $details;
+	my $statline;
+
+	# Read each line of the event log
+EVENT_PROCESS:
+	while ($traceevent = <STDIN>) {
+		if ($traceevent =~ /$regex_traceevent/o) {
+			$process_pid = $1;
+			$timestamp = $3;
+			$tracepoint = $4;
+
+			$process_pid =~ /(.*)-([0-9]*)$/;
+			my $process = $1;
+			my $pid = $2;
+
+			if ($process eq "") {
+				$process = $last_procmap{$pid};
+				$process_pid = "$process-$pid";
+			}
+			$last_procmap{$pid} = $process;
+
+			if ($opt_read_procstat) {
+				$statline = read_statline($pid);
+				if ($opt_read_procstat && $process eq '') {
+					$process_pid = guess_process_pid($pid, $statline);
+				}
+			}
+		} else {
+			next;
+		}
+
+		# Perl Switch() sucks majorly
+		if ($tracepoint eq "mm_vmscan_direct_reclaim_begin") {
+			$timestamp = timestamp_to_ms($timestamp);
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp;
+
+			$details = $5;
+			if ($details !~ /$regex_direct_begin/o) {
+				print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n";
+				print "         $details\n";
+				print "         $regex_direct_begin\n";
+				next;
+			}
+			my $order = $1;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order]++;
+			$perprocesspid{$process_pid}->{STATE_DIRECT_ORDER} = $order;
+		} elsif ($tracepoint eq "mm_vmscan_direct_reclaim_end") {
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END}++;
+
+			# Record how long direct reclaim took this time
+			if (defined $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				my $order = $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER};
+				my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN});
+				$perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency";
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_wake") {
+			$details = $5;
+			if ($details !~ /$regex_kswapd_wake/o) {
+				print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n";
+				print "         $details\n";
+				print "         $regex_kswapd_wake\n";
+				next;
+			}
+
+			my $order = $2;
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER} = $order;
+			if (!$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN}) {
+				$timestamp = timestamp_to_ms($timestamp);
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}++;
+				$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = $timestamp;
+				$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order]++;
+			} else {
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}++;
+				$perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order]++;
+			}
+		} elsif ($tracepoint eq "mm_vmscan_kswapd_sleep") {
+
+			# Count the event itself
+			my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP};
+			$perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP}++;
+
+			# Record how long kswapd was awake
+			$timestamp = timestamp_to_ms($timestamp);
+			my $order = $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER};
+			my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN});
+			$perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index] = "$order-$latency";
+			$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = 0;
+		} elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") {
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++;
+
+			$details = $5;
+			if ($details !~ /$regex_wakeup_kswapd/o) {
+				print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n";
+				print "         $details\n";
+				print "         $regex_wakeup_kswapd\n";
+				next;
+			}
+			my $order = $3;
+			$perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
+		} elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
+			$details = $5;
+			if ($details !~ /$regex_lru_isolate/o) {
+				print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n";
+				print "         $details\n";
+				print "         $regex_lru_isolate/o\n";
+				next;
+			}
+			my $nr_scanned = $4;
+			my $nr_contig_dirty = $7;
+			$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
+		} elsif ($tracepoint eq "mm_vmscan_writepage") {
+			$details = $5;
+			if ($details !~ /$regex_writepage/o) {
+				print "WARNING: Failed to parse mm_vmscan_writepage as expected\n";
+				print "         $details\n";
+				print "         $regex_writepage\n";
+				next;
+			}
+
+			my $flags = $3;
+			my $file = 0;
+			my $sync_io = 0;
+			if ($flags =~ /RECLAIM_WB_FILE/) {
+				$file = 1;
+			}
+			if ($flags =~ /RECLAIM_WB_SYNC/) {
+				$sync_io = 1;
+			}
+			if ($sync_io) {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}++;
+				}
+			} else {
+				if ($file) {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}++;
+				} else {
+					$perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}++;
+				}
+			}
+		} else {
+			$perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
+		}
+
+		if ($sigint_pending) {
+			last EVENT_PROCESS;
+		}
+	}
+}
+
+sub dump_stats {
+	my $hashref = shift;
+	my %stats = %$hashref;
+
+	# Dump per-process stats
+	my $process_pid;
+	my $max_strlen = 0;
+
+	# Get the maximum process name
+	foreach $process_pid (keys %perprocesspid) {
+		my $len = length($process_pid);
+		if ($len > $max_strlen) {
+			$max_strlen = $len;
+		}
+	}
+	$max_strlen += 2;
+
+	# Work out latencies
+	printf("\n") if !$opt_ignorepid;
+	printf("Reclaim latencies expressed as order-latency_in_ms\n") if !$opt_ignorepid;
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[0] &&
+				!$stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[0]) {
+			next;
+		}
+
+		printf "%-" . $max_strlen . "s ", $process_pid if !$opt_ignorepid;
+		my $index = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] ||
+			defined $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) {
+
+			if ($stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+				printf("%s ", $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+				$total_direct_latency += $latency;
+			} else {
+				printf("%s ", $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) if !$opt_ignorepid;
+				my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]);
+				$total_kswapd_latency += $latency;
+			}
+			$index++;
+		}
+		print "\n" if !$opt_ignorepid;
+	}
+
+	# Print out process activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s %8s\n", "Process", "Direct",  "Wokeup", "Pages",   "Pages",   "Pages",     "Time");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s %8s\n", "details", "Rclms",   "Kswapd", "Scanned", "Sync-IO", "ASync-IO",  "Stalled");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			next;
+		}
+
+		$total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+
+		$total_direct_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		my $index = 0;
+		my $this_reclaim_delay = 0;
+		while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+			 my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+			$this_reclaim_delay += $latency;
+			$index++;
+		}
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u   %8u %8u %8.3f",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN},
+			$stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC},
+			$this_reclaim_delay / 1000);
+
+		if ($stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+				if ($count != 0) {
+					print "direct-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+				if ($count != 0) {
+					print "wakeup-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
+			print "      ";
+			my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
+			if ($count != 0) {
+				print "contig-dirty=$count ";
+			}
+		}
+
+		print "\n";
+	}
+
+	# Print out kswapd activity
+	printf("\n");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Kswapd",   "Kswapd",  "Order",     "Pages",   "Pages",  "Pages");
+	printf("%-" . $max_strlen . "s %8s %10s   %8s   %8s %8s %8s\n", "Instance", "Wakeups", "Re-wakeup", "Scanned", "Sync-IO", "ASync-IO");
+	foreach $process_pid (keys %stats) {
+
+		if (!$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			next;
+		}
+
+		$total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+		$total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$total_kswapd_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		printf("%-" . $max_strlen . "s %8d %10d   %8u   %8i %8u",
+			$process_pid,
+			$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE},
+			$stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP},
+			$stats{$process_pid}->{HIGH_NR_SCANNED},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+			$stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC});
+
+		if ($stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+				if ($count != 0) {
+					print "wake-$order=$count ";
+				}
+			}
+		}
+		if ($stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}) {
+			print "      ";
+			for (my $order = 0; $order < 20; $order++) {
+				my $count = $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order];
+				if ($count != 0) {
+					print "rewake-$order=$count ";
+				}
+			}
+		}
+		printf("\n");
+	}
+
+	# Print out summaries
+	$total_direct_latency /= 1000;
+	$total_kswapd_latency /= 1000;
+	print "\nSummary\n";
+	print "Direct reclaims:     			$total_direct_reclaim\n";
+	print "Direct reclaim pages scanned:		$total_direct_nr_scanned\n";
+	print "Direct reclaim write file sync I/O:	$total_direct_writepage_file_sync\n";
+	print "Direct reclaim write anon sync I/O:	$total_direct_writepage_anon_sync\n";
+	print "Direct reclaim write file async I/O:	$total_direct_writepage_file_async\n";
+	print "Direct reclaim write anon async I/O:	$total_direct_writepage_anon_async\n";
+	print "Wake kswapd requests:			$total_wakeup_kswapd\n";
+	printf "Time stalled direct reclaim: 		%-1.2f seconds\n", $total_direct_latency;
+	print "\n";
+	print "Kswapd wakeups:				$total_kswapd_wake\n";
+	print "Kswapd pages scanned:			$total_kswapd_nr_scanned\n";
+	print "Kswapd reclaim write file sync I/O:	$total_kswapd_writepage_file_sync\n";
+	print "Kswapd reclaim write anon sync I/O:	$total_kswapd_writepage_anon_sync\n";
+	print "Kswapd reclaim write file async I/O:	$total_kswapd_writepage_file_async\n";
+	print "Kswapd reclaim write anon async I/O:	$total_kswapd_writepage_anon_async\n";
+	printf "Time kswapd awake:			%-1.2f seconds\n", $total_kswapd_latency;
+}
+
+sub aggregate_perprocesspid() {
+	my $process_pid;
+	my $process;
+	undef %perprocess;
+
+	foreach $process_pid (keys %perprocesspid) {
+		$process = $process_pid;
+		$process =~ s/-([0-9])*$//;
+		if ($process eq '') {
+			$process = "NO_PROCESS_NAME";
+		}
+
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN} += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+		$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE} += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+		$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+		$perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP};
+		$perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+		$perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+		for (my $order = 0; $order < 20; $order++) {
+			$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+			$perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+
+		}
+
+		# Aggregate direct reclaim latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_DIRECT_RECLAIM_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+
+		# Aggregate kswapd latencies
+		my $wr_index = $perprocess{$process}->{MM_VMSCAN_KSWAPD_SLEEP};
+		my $rd_index = 0;
+		while (defined $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index]) {
+			$perprocess{$process}->{HIGH_KSWAPD_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index];
+			$rd_index++;
+			$wr_index++;
+		}
+		$perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+	}
+}
+
+sub report() {
+	if (!$opt_ignorepid) {
+		dump_stats(\%perprocesspid);
+	} else {
+		aggregate_perprocesspid();
+		dump_stats(\%perprocess);
+	}
+}
+
+# Process events or signals until neither is available
+sub signal_loop() {
+	my $sigint_processed;
+	do {
+		$sigint_processed = 0;
+		process_events();
+
+		# Handle pending signals if any
+		if ($sigint_pending) {
+			my $current_time = time;
+
+			if ($sigint_exit) {
+				print "Received exit signal\n";
+				$sigint_pending = 0;
+			}
+			if ($sigint_report) {
+				if ($current_time >= $sigint_received + 2) {
+					report();
+					$sigint_report = 0;
+					$sigint_pending = 0;
+					$sigint_processed = 1;
+				}
+			}
+		}
+	} while ($sigint_pending || $sigint_processed);
+}
+
+signal_loop();
+report();
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index 66e9358e214..ccd951fa94e 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -694,7 +694,7 @@ static void usage(void)
 #endif
 "            -l|--list                  Show page details in ranges\n"
 "            -L|--list-each             Show page details one by one\n"
-"            -N|--no-summary            Don't show summay info\n"
+"            -N|--no-summary            Don't show summary info\n"
 "            -X|--hwpoison              hwpoison pages\n"
 "            -x|--unpoison              unpoison pages\n"
 "            -h|--help                  Show this usage message\n"
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index feb37e17701..cf5437deda8 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -18,6 +18,7 @@ Offset	Proto	Name		Meaning
 080/010	ALL	hd0_info	hd0 disk parameter, OBSOLETE!!
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
+0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
diff --git a/MAINTAINERS b/MAINTAINERS
index 88ec0447a4f..832f904db11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -574,7 +574,6 @@ L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/nand/bcm_umi_nand.c
 F:	drivers/mtd/nand/bcm_umi_bch.c
-F:	drivers/mtd/nand/bcm_umi_hamming.c
 F:	drivers/mtd/nand/nand_bcm_umi.h
 
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
@@ -975,12 +974,11 @@ F:	drivers/input/keyboard/w90p910_keypad.c
 F:	drivers/input/touchscreen/w90p910_ts.c
 F:	drivers/watchdog/nuc900_wdt.c
 F:	drivers/net/arm/w90p910_ether.c
-F:	drivers/mtd/nand/w90p910_nand.c
+F:	drivers/mtd/nand/nuc900_nand.c
 F:	drivers/rtc/rtc-nuc900.c
 F:	drivers/spi/spi_nuc900.c
 F:	drivers/usb/host/ehci-w90x900.c
 F:	drivers/video/nuc900fb.c
-F:	drivers/sound/soc/nuc900/
 
 ARM/U300 MACHINE SUPPORT
 M:	Linus Walleij <linus.walleij@stericsson.com>
@@ -1010,14 +1008,14 @@ M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/vpac270.c
-F:	arch/arm/mach-pxa/include/mach-pxa/vpac270.h
+F:	arch/arm/mach-pxa/include/mach/vpac270.h
 
 ARM/ZIPIT Z2 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/z2.c
-F:	arch/arm/mach-pxa/include/mach-pxa/z2.h
+F:	arch/arm/mach-pxa/include/mach/z2.h
 
 ASC7621 HARDWARE MONITOR DRIVER
 M:	George Joseph <george.joseph@fairview5.com>
@@ -1087,7 +1085,6 @@ F:	drivers/net/wireless/ath/ath5k/
 ATHEROS ATH9K WIRELESS DRIVER
 M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
 M:	Jouni Malinen <jmalinen@atheros.com>
-M:	Sujith Manoharan <Sujith.Manoharan@atheros.com>
 M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
 M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
@@ -1253,8 +1250,7 @@ S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-M:	"Sergey S. Kostyliov" <rathamahata@php4.ru>
-S:	Maintained
+S:	Orphan
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
@@ -1569,6 +1565,16 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Supported
 F:	drivers/platform/x86/classmate-laptop.c
 
+COCCINELLE/Semantic Patches (SmPL)
+M:	Julia Lawall <julia@diku.dk>
+M:	Gilles Muller <Gilles.Muller@lip6.fr>
+M:	Nicolas Palix <npalix@diku.dk>
+L:	cocci@diku.dk (moderated for non-subscribers)
+W:	http://coccinelle.lip6.fr/
+S:	Supported
+F:	scripts/coccinelle/
+F:	scripts/coccicheck
+
 CODA FILE SYSTEM
 M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
@@ -1724,6 +1730,8 @@ CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
 M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
+F:	crypto/ansi_cprng.c
+F:	crypto/rng.c
 
 CS5535 Audio ALSA driver
 M:	Jaya Kumar <jayakumar.alsa@gmail.com>
@@ -1882,6 +1890,7 @@ F:	drivers/firmware/dcdbas.*
 DELL WMI EXTRAS DRIVER
 M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
+F:	drivers/platform/x86/dell-wmi.c
 
 DEVICE NUMBER REGISTRY
 M:	Torben Mathiasen <device@lanana.org>
@@ -2011,6 +2020,7 @@ L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
+F:	include/drm/
 
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
@@ -2227,6 +2237,7 @@ S:	Maintained
 F:	drivers/net/eth16i.c
 
 EXT2 FILE SYSTEM
+M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext2.txt
@@ -2234,8 +2245,9 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
+M:	Jan Kara <jack@suse.cz>
 M:	Andrew Morton <akpm@linux-foundation.org>
-M:	Andreas Dilger <adilger@sun.com>
+M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext3.txt
@@ -2244,7 +2256,7 @@ F:	include/linux/ext3*
 
 EXT4 FILE SYSTEM
 M:	"Theodore Ts'o" <tytso@mit.edu>
-M:	Andreas Dilger <adilger@sun.com>
+M:	Andreas Dilger <adilger.kernel@dilger.ca>
 L:	linux-ext4@vger.kernel.org
 W:	http://ext4.wiki.kernel.org
 Q:	http://patchwork.ozlabs.org/project/linux-ext4/list/
@@ -2312,6 +2324,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
 F:	drivers/firewire/
 F:	include/linux/firewire*.h
+F:	tools/firewire/
 
 FIRMWARE LOADER (request_firmware)
 S:	Orphan
@@ -3197,6 +3210,13 @@ F:	Documentation/video4linux/*.ivtv
 F:	drivers/media/video/ivtv/
 F:	include/linux/ivtv*
 
+JC42.4 TEMPERATURE SENSOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	drivers/hwmon/jc42.c
+F:	Documentation/hwmon/jc42
+
 JFS FILESYSTEM
 M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:	jfs-discussion@lists.sourceforge.net
@@ -3266,8 +3286,8 @@ F:	fs/autofs4/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
 M:	Michal Marek <mmarek@suse.cz>
-T:	git git://repo.or.cz/linux-kbuild.git for-next
-T:	git git://repo.or.cz/linux-kbuild.git for-linus
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git for-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6.git rc-fixes
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/
@@ -3393,13 +3413,6 @@ F:	include/linux/kmemleak.h
 F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
-KMEMTRACE
-M:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
-S:	Maintained
-F:	Documentation/trace/kmemtrace.txt
-F:	include/linux/kmemtrace.h
-F:	kernel/trace/kmemtrace.c
-
 KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
@@ -3515,6 +3528,7 @@ M:	Marcelo Tosatti <marcelo@kvack.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
+F:	arch/powerpc/platforms/8xx/
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 M:	Kumar Gala <galak@kernel.crashing.org>
@@ -3617,7 +3631,7 @@ M:	Mike Frysinger <vapier@gentoo.org>
 M:	Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+T:	git git://ltp.git.sourceforge.net/gitroot/ltp/ltp-dev
 S:	Maintained
 
 M32R ARCHITECTURE
@@ -4039,7 +4053,7 @@ F:	net/rfkill/
 F:	net/wireless/
 F:	include/net/ieee80211*
 F:	include/linux/wireless.h
-F:	include/linux/iw_handler.h
+F:	include/net/iw_handler.h
 F:	drivers/net/wireless/
 
 NETWORKING DRIVERS
@@ -4187,6 +4201,8 @@ M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
+F:	drivers/usb/*/*omap*
+F:	arch/arm/*omap*/usb*
 
 OMFS FILESYSTEM
 M:	Bob Copeland <me@bobcopeland.com>
@@ -4527,7 +4543,7 @@ F:	drivers/net/pppox.c
 PPP OVER L2TP
 M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
-F:	drivers/net/pppol2tp.c
+F:	net/l2tp/l2tp_ppp.c
 F:	include/linux/if_pppol2tp.h
 
 PPS SUPPORT
@@ -4554,11 +4570,6 @@ W:	http://prism54.org
 S:	Obsolete
 F:	drivers/net/wireless/prism54/
 
-PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-M:	Peter Denison <promise@pnd-pc.demon.co.uk>
-W:	http://www.pnd-pc.demon.co.uk/promise/
-S:	Maintained
-
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
 M:	Mikael Pettersson <mikpe@it.uu.se>
 L:	linux-ide@vger.kernel.org
@@ -4591,6 +4602,7 @@ PS3VRAM DRIVER
 M:	Jim Paris <jim@jtan.com>
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
+F:	drivers/block/ps3vram.c
 
 PTRACE SUPPORT
 M:	Roland McGrath <roland@redhat.com>
@@ -4731,7 +4743,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:	drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-M:	Nick Piggin <npiggin@suse.de>
+M:	Nick Piggin <npiggin@kernel.dk>
 S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
@@ -4817,8 +4829,8 @@ F:	net/rfkill/
 RICOH SMARTMEDIA/XD DRIVER
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
-F:	drivers/mtd/nand/r822.c
-F:	drivers/mtd/nand/r822.h
+F:	drivers/mtd/nand/r852.c
+F:	drivers/mtd/nand/r852.h
 
 RISCOM8 DRIVER
 S:	Orphan
@@ -5245,6 +5257,13 @@ M:	Nicolas Pitre <nico@fluxnic.net>
 S:	Odd Fixes
 F:	drivers/net/smc91x.*
 
+SMM665 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/smm665
+F:	drivers/hwmon/smm665.c
+
 SMSC47B397 HARDWARE MONITOR DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
@@ -5265,11 +5284,6 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/smsc9420.*
 
-SMX UIO Interface
-M:	Ben Nizette <bn@niasdigital.com>
-S:	Maintained
-F:	drivers/uio/uio_smx.c
-
 SN-IA64 (Itanium) SUB-PLATFORM
 M:	Jes Sorensen <jes@sgi.com>
 L:	linux-altix@sgi.com
@@ -5357,7 +5371,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
-F:	drivers/sbus
+F:	drivers/sbus/
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
@@ -5399,7 +5413,8 @@ S:	Maintained
 F:	arch/arm/mach-spear*/clock.c
 F:	arch/arm/mach-spear*/include/mach/clkdev.h
 F:	arch/arm/plat-spear/clock.c
-F:	arch/arm/plat-spear/include/plat/clock.h and clkdev.h
+F:	arch/arm/plat-spear/include/plat/clkdev.h
+F:	arch/arm/plat-spear/include/plat/clock.h
 
 SPEAR PAD MULTIPLEXING SUPPORT
 M:	Viresh Kumar <viresh.kumar@st.com>
@@ -5479,11 +5494,6 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/starfire*
 
-STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-S:	Orphan
-F:	drivers/staging/strip/strip.c
-F:	include/linux/if_strip.h
-
 STRADIS MPEG-2 DECODER DRIVER
 M:	Nathan Laredo <laredo@gnu.org>
 W:	http://www.stradis.com/
@@ -5559,6 +5569,15 @@ W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
 F:	net/ipv4/tcp_lp.c
 
+TEGRA SUPPORT
+M:	Colin Cross <ccross@android.com>
+M:	Erik Gilling <konkers@android.com>
+M:	Olof Johansson <olof@lixom.net>
+L:	linux-tegra@vger.kernel.org
+T:	git git://android.git.kernel.org/kernel/tegra.git
+S:	Supported
+F:	arch/arm/mach-tegra
+
 TEHUTI ETHERNET DRIVER
 M:	Alexander Indenbaum <baum@tehutinetworks.net>
 M:	Andy Gospodarek <andy@greyhouse.net>
@@ -5611,6 +5630,12 @@ F:	include/linux/tipc*.h
 F:	include/net/tipc/
 F:	net/tipc/
 
+TILE ARCHITECTURE
+M:	Chris Metcalf <cmetcalf@tilera.com>
+W:	http://www.tilera.com/scm/
+S:	Supported
+F:	arch/tile/
+
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
@@ -5675,7 +5700,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -5748,6 +5773,9 @@ UCLINUX FOR RENESAS H8/300 (H8300)
 M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
+F:	arch/h8300/
+F:	drivers/ide/ide-h8300.c
+F:	drivers/net/ne-h8300.c
 
 UDF FILESYSTEM
 M:	Jan Kara <jack@suse.cz>
@@ -6039,7 +6067,7 @@ F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-M:	Laurent Pinchart <laurent.pinchart@skynet.be>
+M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6172,9 +6200,12 @@ F:	drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 M:	Joseph Chan <JosephChan@via.com.tw>
-M:	Scott Fang <ScottFang@viatech.com.cn>
+M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
 L:	linux-fbdev@vger.kernel.org
 S:	Maintained
+F:	include/linux/via-core.h
+F:	include/linux/via-gpio.h
+F:	include/linux/via_i2c.h
 F:	drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
@@ -6288,6 +6319,11 @@ M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
+F:	Documentation/wimax/README.wimax
+F:	include/linux/wimax.h
+F:	include/linux/wimax/debug.h
+F:	include/net/wimax.h
+F:	net/wimax/
 
 WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
 M:	David Vrabel <david.vrabel@csr.com>
diff --git a/Makefile b/Makefile
index 141da26fda4..7431c283f15 100644
--- a/Makefile
+++ b/Makefile
@@ -332,10 +332,9 @@ CHECK		= sparse
 
 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 		  -Wbitwise -Wno-return-void $(CF)
-MODFLAGS	= -DMODULE
-CFLAGS_MODULE   = $(MODFLAGS)
-AFLAGS_MODULE   = $(MODFLAGS)
-LDFLAGS_MODULE  = -T $(srctree)/scripts/module-common.lds
+CFLAGS_MODULE   =
+AFLAGS_MODULE   =
+LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
@@ -354,7 +353,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
 		   -fno-delete-null-pointer-checks
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
 KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE  := -DMODULE
+KBUILD_CFLAGS_MODULE  := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
 KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
@@ -369,6 +373,8 @@ export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
 export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
 export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
 
 # When compiling out-of-tree modules, put MODVERDIR in the module
 # tree rather than in the kernel tree. The kernel tree might
@@ -412,9 +418,9 @@ endif
 # of make so .config is not included in this case either (for *config).
 
 no-dot-config-targets := clean mrproper distclean \
-			 cscope TAGS tags help %docs check% \
+			 cscope TAGS tags help %docs check% coccicheck \
 			 include/linux/version.h headers_% \
-			 kernelrelease kernelversion
+			 kernelversion %src-pkg
 
 config-targets := 0
 mixed-targets  := 0
@@ -526,7 +532,7 @@ endif # $(dot-config)
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overridden in the arch makefile
+# Defaults to vmlinux, but the arch makefile usually adds further targets
 all: vmlinux
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
@@ -557,6 +563,10 @@ KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -gdwarf-2
 endif
 
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS 	+= $(call cc-option, -femit-struct-debug-baseonly)
+endif
+
 ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
 endif
@@ -603,7 +613,7 @@ endif
 # Use --build-id when available.
 LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
 			      $(call cc-ldoption, -Wl$(comma)--build-id,))
-LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
 LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
 
 ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
@@ -1158,6 +1168,8 @@ distclean: mrproper
 # rpm target kept for backward compatibility
 package-dir	:= $(srctree)/scripts/package
 
+%src-pkg: FORCE
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
 %pkg: include/config/kernel.release FORCE
 	$(Q)$(MAKE) $(build)=$(package-dir) $@
 rpm: include/config/kernel.release FORCE
@@ -1209,8 +1221,9 @@ help:
 	@echo  '  includecheck    - Check for duplicate included header files'
 	@echo  '  export_report   - List the usages of all exported symbols'
 	@echo  '  headers_check   - Sanity check on exported headers'
-	@echo  '  headerdep       - Detect inclusion cycles in headers'; \
-	 echo  ''
+	@echo  '  headerdep       - Detect inclusion cycles in headers'
+	@$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+	@echo  ''
 	@echo  'Kernel packaging:'
 	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
@@ -1369,6 +1382,9 @@ versioncheck:
 		-name '*.[hcS]' -type f -print | sort \
 		| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
 
+coccicheck:
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
 namespacecheck:
 	$(PERL) $(srctree)/scripts/namespace.pl
 
@@ -1393,9 +1409,9 @@ checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
 	$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
 
-kernelrelease:
-	$(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
-	$(error kernelrelease not valid - run 'make prepare' to update it))
+kernelrelease: include/config/kernel.release
+	@echo $(KERNELRELEASE)
+
 kernelversion:
 	@echo $(KERNELVERSION)
 
@@ -1472,6 +1488,7 @@ cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
                   $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
 
 a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
+	  $(KBUILD_AFLAGS_KERNEL)                              \
 	  $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
 	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
 
diff --git a/arch/Kconfig b/arch/Kconfig
index acda512da2e..4877a8c8ee1 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -151,4 +151,11 @@ config HAVE_MIXED_BREAKPOINTS_REGS
 config HAVE_USER_RETURN_NOTIFIER
 	bool
 
+config HAVE_PERF_EVENTS_NMI
+	bool
+	help
+	  System hardware can generate an NMI using the perf event
+	  subsystem.  Also has support for calculating CPU cycle events
+	  to determine how many clock cycles in a given period.
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 3e2e540a0f2..b9647bb66d1 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -47,10 +47,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_CMOS_UPDATE
         def_bool y
 
diff --git a/arch/alpha/include/asm/hw_irq.h b/arch/alpha/include/asm/hw_irq.h
index a37db0f9509..5050ac81cd9 100644
--- a/arch/alpha/include/asm/hw_irq.h
+++ b/arch/alpha/include/asm/hw_irq.h
@@ -3,6 +3,7 @@
 
 
 extern volatile unsigned long irq_err_count;
+DECLARE_PER_CPU(unsigned long, irq_pmi_count);
 
 #ifdef CONFIG_ALPHA_GENERIC
 #define ACTUAL_NR_IRQS	alpha_mv.nr_irqs
diff --git a/arch/alpha/include/asm/local64.h b/arch/alpha/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/alpha/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/alpha/include/asm/md.h b/arch/alpha/include/asm/md.h
deleted file mode 100644
index 6c9b8222a4f..00000000000
--- a/arch/alpha/include/asm/md.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* $Id: md.h,v 1.1 1997/12/15 15:11:48 jj Exp $
- * md.h: High speed xor_block operation for RAID4/5 
- *
- */
- 
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
-
-#endif /* __ASM_MD_H */
diff --git a/arch/alpha/include/asm/perf_event.h b/arch/alpha/include/asm/perf_event.h
index 3bef8522017..4157cd3c44a 100644
--- a/arch/alpha/include/asm/perf_event.h
+++ b/arch/alpha/include/asm/perf_event.h
@@ -2,8 +2,14 @@
 #define __ASM_ALPHA_PERF_EVENT_H
 
 /* Alpha only supports software events through this interface. */
-static inline void set_perf_event_pending(void) { }
+extern void set_perf_event_pending(void);
 
 #define PERF_EVENT_INDEX_OFFSET 0
 
+#ifdef CONFIG_PERF_EVENTS
+extern void init_hw_perf_events(void);
+#else
+static inline void init_hw_perf_events(void)    { }
+#endif
+
 #endif /* __ASM_ALPHA_PERF_EVENT_H */
diff --git a/arch/alpha/include/asm/wrperfmon.h b/arch/alpha/include/asm/wrperfmon.h
new file mode 100644
index 00000000000..319bf6788d8
--- /dev/null
+++ b/arch/alpha/include/asm/wrperfmon.h
@@ -0,0 +1,93 @@
+/*
+ * Definitions for use with the Alpha wrperfmon PAL call.
+ */
+
+#ifndef __ALPHA_WRPERFMON_H
+#define __ALPHA_WRPERFMON_H
+
+/* Following commands are implemented on all CPUs */
+#define PERFMON_CMD_DISABLE 0
+#define PERFMON_CMD_ENABLE 1
+#define PERFMON_CMD_DESIRED_EVENTS 2
+#define PERFMON_CMD_LOGGING_OPTIONS 3
+/* Following commands on EV5/EV56/PCA56 only */
+#define PERFMON_CMD_INT_FREQ 4
+#define PERFMON_CMD_ENABLE_CLEAR 7
+/* Following commands are on EV5 and better CPUs */
+#define PERFMON_CMD_READ 5
+#define PERFMON_CMD_WRITE 6
+/* Following command are on EV6 and better CPUs */
+#define PERFMON_CMD_ENABLE_WRITE 7
+/* Following command are on EV67 and better CPUs */
+#define PERFMON_CMD_I_STAT 8
+#define PERFMON_CMD_PMPC 9
+
+
+/* EV5/EV56/PCA56 Counters */
+#define EV5_PCTR_0 (1UL<<0)
+#define EV5_PCTR_1 (1UL<<1)
+#define EV5_PCTR_2 (1UL<<2)
+
+#define EV5_PCTR_0_COUNT_SHIFT 48
+#define EV5_PCTR_1_COUNT_SHIFT 32
+#define EV5_PCTR_2_COUNT_SHIFT 16
+
+#define EV5_PCTR_0_COUNT_MASK 0xffffUL
+#define EV5_PCTR_1_COUNT_MASK 0xffffUL
+#define EV5_PCTR_2_COUNT_MASK 0x3fffUL
+
+/* EV6 Counters */
+#define EV6_PCTR_0 (1UL<<0)
+#define EV6_PCTR_1 (1UL<<1)
+
+#define EV6_PCTR_0_COUNT_SHIFT 28
+#define EV6_PCTR_1_COUNT_SHIFT 6
+
+#define EV6_PCTR_0_COUNT_MASK 0xfffffUL
+#define EV6_PCTR_1_COUNT_MASK 0xfffffUL
+
+/* EV67 (and subsequent) counters */
+#define EV67_PCTR_0 (1UL<<0)
+#define EV67_PCTR_1 (1UL<<1)
+
+#define EV67_PCTR_0_COUNT_SHIFT 28
+#define EV67_PCTR_1_COUNT_SHIFT 6
+
+#define EV67_PCTR_0_COUNT_MASK 0xfffffUL
+#define EV67_PCTR_1_COUNT_MASK 0xfffffUL
+
+
+/*
+ * The Alpha Architecure Handbook, vers. 4 (1998) appears to have a misprint
+ *  in Table E-23 regarding the bits that set the event PCTR 1 counts.
+ *  Hopefully what we have here is correct.
+ */
+#define EV6_PCTR_0_EVENT_MASK 0x10UL
+#define EV6_PCTR_1_EVENT_MASK 0x0fUL
+
+/* EV6 Events */
+#define EV6_PCTR_0_CYCLES (0UL << 4)
+#define EV6_PCTR_0_INSTRUCTIONS (1UL << 4)
+
+#define EV6_PCTR_1_CYCLES 0
+#define EV6_PCTR_1_BRANCHES 1
+#define EV6_PCTR_1_BRANCH_MISPREDICTS 2
+#define EV6_PCTR_1_DTB_SINGLE_MISSES 3
+#define EV6_PCTR_1_DTB_DOUBLE_MISSES 4
+#define EV6_PCTR_1_ITB_MISSES 5
+#define EV6_PCTR_1_UNALIGNED_TRAPS 6
+#define EV6_PCTR_1_REPLY_TRAPS 7
+
+/* From the Alpha Architecture Reference Manual, 4th edn., 2002 */
+#define EV67_PCTR_MODE_MASK 0x10UL
+#define EV67_PCTR_EVENT_MASK 0x0CUL
+
+#define EV67_PCTR_MODE_PROFILEME (1UL<<4)
+#define EV67_PCTR_MODE_AGGREGATE (0UL<<4)
+
+#define EV67_PCTR_INSTR_CYCLES (0UL<<2)
+#define EV67_PCTR_CYCLES_UNDEF (1UL<<2)
+#define EV67_PCTR_INSTR_BCACHEMISS (2UL<<2)
+#define EV67_PCTR_CYCLES_MBOX (3UL<<2)
+
+#endif
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a62fb46ef2..1ee9b5b629b 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci_iommu.o pci-sysfs.o
 obj-$(CONFIG_SRM_ENV)	+= srm_env.o
 obj-$(CONFIG_MODULES)	+= module.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index 7f912ba3d9a..fe912984d9b 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -31,6 +31,7 @@
 #include <asm/uaccess.h>
 
 volatile unsigned long irq_err_count;
+DEFINE_PER_CPU(unsigned long, irq_pmi_count);
 
 void ack_bad_irq(unsigned int irq)
 {
@@ -63,9 +64,7 @@ int irq_select_affinity(unsigned int irq)
 int
 show_interrupts(struct seq_file *p, void *v)
 {
-#ifdef CONFIG_SMP
 	int j;
-#endif
 	int irq = *(loff_t *) v;
 	struct irqaction * action;
 	unsigned long flags;
@@ -112,6 +111,10 @@ unlock:
 			seq_printf(p, "%10lu ", cpu_data[j].ipi_count);
 		seq_putc(p, '\n');
 #endif
+		seq_puts(p, "PMI: ");
+		for_each_online_cpu(j)
+			seq_printf(p, "%10lu ", per_cpu(irq_pmi_count, j));
+		seq_puts(p, "          Performance Monitoring\n");
 		seq_printf(p, "ERR: %10lu\n", irq_err_count);
 	}
 	return 0;
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index cfde865b78e..5f77afb88e8 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -10,6 +10,7 @@
 
 #include <asm/machvec.h>
 #include <asm/dma.h>
+#include <asm/perf_event.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -111,6 +112,8 @@ init_IRQ(void)
 	wrent(entInt, 0);
 
 	alpha_mv.init_irq();
+
+	init_hw_perf_events();
 }
 
 /*
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
new file mode 100644
index 00000000000..51c39fa4169
--- /dev/null
+++ b/arch/alpha/kernel/perf_event.c
@@ -0,0 +1,842 @@
+/*
+ * Hardware performance events for the Alpha.
+ *
+ * We implement HW counts on the EV67 and subsequent CPUs only.
+ *
+ * (C) 2010 Michael J. Cree
+ *
+ * Somewhat based on the Sparc code, and to a lesser extent the PowerPC and
+ * ARM code, which are copyright by their respective authors.
+ */
+
+#include <linux/perf_event.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/hwrpb.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/pal.h>
+#include <asm/wrperfmon.h>
+#include <asm/hw_irq.h>
+
+
+/* The maximum number of PMCs on any Alpha CPU whatsoever. */
+#define MAX_HWEVENTS 3
+#define PMC_NO_INDEX -1
+
+/* For tracking PMCs and the hw events they monitor on each CPU. */
+struct cpu_hw_events {
+	int			enabled;
+	/* Number of events scheduled; also number entries valid in arrays below. */
+	int			n_events;
+	/* Number events added since last hw_perf_disable(). */
+	int			n_added;
+	/* Events currently scheduled. */
+	struct perf_event	*event[MAX_HWEVENTS];
+	/* Event type of each scheduled event. */
+	unsigned long		evtype[MAX_HWEVENTS];
+	/* Current index of each scheduled event; if not yet determined
+	 * contains PMC_NO_INDEX.
+	 */
+	int			current_idx[MAX_HWEVENTS];
+	/* The active PMCs' config for easy use with wrperfmon(). */
+	unsigned long		config;
+	/* The active counters' indices for easy use with wrperfmon(). */
+	unsigned long		idx_mask;
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+
+
+/*
+ * A structure to hold the description of the PMCs available on a particular
+ * type of Alpha CPU.
+ */
+struct alpha_pmu_t {
+	/* Mapping of the perf system hw event types to indigenous event types */
+	const int *event_map;
+	/* The number of entries in the event_map */
+	int  max_events;
+	/* The number of PMCs on this Alpha */
+	int  num_pmcs;
+	/*
+	 * All PMC counters reside in the IBOX register PCTR.  This is the
+	 * LSB of the counter.
+	 */
+	int  pmc_count_shift[MAX_HWEVENTS];
+	/*
+	 * The mask that isolates the PMC bits when the LSB of the counter
+	 * is shifted to bit 0.
+	 */
+	unsigned long pmc_count_mask[MAX_HWEVENTS];
+	/* The maximum period the PMC can count. */
+	unsigned long pmc_max_period[MAX_HWEVENTS];
+	/*
+	 * The maximum value that may be written to the counter due to
+	 * hardware restrictions is pmc_max_period - pmc_left.
+	 */
+	long pmc_left[3];
+	 /* Subroutine for allocation of PMCs.  Enforces constraints. */
+	int (*check_constraints)(struct perf_event **, unsigned long *, int);
+};
+
+/*
+ * The Alpha CPU PMU description currently in operation.  This is set during
+ * the boot process to the specific CPU of the machine.
+ */
+static const struct alpha_pmu_t *alpha_pmu;
+
+
+#define HW_OP_UNSUPPORTED -1
+
+/*
+ * The hardware description of the EV67, EV68, EV69, EV7 and EV79 PMUs
+ * follow. Since they are identical we refer to them collectively as the
+ * EV67 henceforth.
+ */
+
+/*
+ * EV67 PMC event types
+ *
+ * There is no one-to-one mapping of the possible hw event types to the
+ * actual codes that are used to program the PMCs hence we introduce our
+ * own hw event type identifiers.
+ */
+enum ev67_pmc_event_type {
+	EV67_CYCLES = 1,
+	EV67_INSTRUCTIONS,
+	EV67_BCACHEMISS,
+	EV67_MBOXREPLAY,
+	EV67_LAST_ET
+};
+#define EV67_NUM_EVENT_TYPES (EV67_LAST_ET-EV67_CYCLES)
+
+
+/* Mapping of the hw event types to the perf tool interface */
+static const int ev67_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	 = EV67_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	 = EV67_INSTRUCTIONS,
+	[PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	 = EV67_BCACHEMISS,
+};
+
+struct ev67_mapping_t {
+	int config;
+	int idx;
+};
+
+/*
+ * The mapping used for one event only - these must be in same order as enum
+ * ev67_pmc_event_type definition.
+ */
+static const struct ev67_mapping_t ev67_mapping[] = {
+	{EV67_PCTR_INSTR_CYCLES, 1},	 /* EV67_CYCLES, */
+	{EV67_PCTR_INSTR_CYCLES, 0},	 /* EV67_INSTRUCTIONS */
+	{EV67_PCTR_INSTR_BCACHEMISS, 1}, /* EV67_BCACHEMISS */
+	{EV67_PCTR_CYCLES_MBOX, 1}	 /* EV67_MBOXREPLAY */
+};
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the
+ * EV67 PMU.  Also allocate counter indices and config.
+ */
+static int ev67_check_constraints(struct perf_event **event,
+				unsigned long *evtype, int n_ev)
+{
+	int idx0;
+	unsigned long config;
+
+	idx0 = ev67_mapping[evtype[0]-1].idx;
+	config = ev67_mapping[evtype[0]-1].config;
+	if (n_ev == 1)
+		goto success;
+
+	BUG_ON(n_ev != 2);
+
+	if (evtype[0] == EV67_MBOXREPLAY || evtype[1] == EV67_MBOXREPLAY) {
+		/* MBOX replay traps must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_MBOXREPLAY) ? 1 : 0;
+		/* Only cycles can accompany MBOX replay traps */
+		if (evtype[idx0] == EV67_CYCLES) {
+			config = EV67_PCTR_CYCLES_MBOX;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_BCACHEMISS || evtype[1] == EV67_BCACHEMISS) {
+		/* Bcache misses must be on PMC 1 */
+		idx0 = (evtype[0] == EV67_BCACHEMISS) ? 1 : 0;
+		/* Only instructions can accompany Bcache misses */
+		if (evtype[idx0] == EV67_INSTRUCTIONS) {
+			config = EV67_PCTR_INSTR_BCACHEMISS;
+			goto success;
+		}
+	}
+
+	if (evtype[0] == EV67_INSTRUCTIONS || evtype[1] == EV67_INSTRUCTIONS) {
+		/* Instructions must be on PMC 0 */
+		idx0 = (evtype[0] == EV67_INSTRUCTIONS) ? 0 : 1;
+		/* By this point only cycles can accompany instructions */
+		if (evtype[idx0^1] == EV67_CYCLES) {
+			config = EV67_PCTR_INSTR_CYCLES;
+			goto success;
+		}
+	}
+
+	/* Otherwise, darn it, there is a conflict.  */
+	return -1;
+
+success:
+	event[0]->hw.idx = idx0;
+	event[0]->hw.config_base = config;
+	if (n_ev == 2) {
+		event[1]->hw.idx = idx0 ^ 1;
+		event[1]->hw.config_base = config;
+	}
+	return 0;
+}
+
+
+static const struct alpha_pmu_t ev67_pmu = {
+	.event_map = ev67_perfmon_event_map,
+	.max_events = ARRAY_SIZE(ev67_perfmon_event_map),
+	.num_pmcs = 2,
+	.pmc_count_shift = {EV67_PCTR_0_COUNT_SHIFT, EV67_PCTR_1_COUNT_SHIFT, 0},
+	.pmc_count_mask = {EV67_PCTR_0_COUNT_MASK,  EV67_PCTR_1_COUNT_MASK,  0},
+	.pmc_max_period = {(1UL<<20) - 1, (1UL<<20) - 1, 0},
+	.pmc_left = {16, 4, 0},
+	.check_constraints = ev67_check_constraints
+};
+
+
+
+/*
+ * Helper routines to ensure that we read/write only the correct PMC bits
+ * when calling the wrperfmon PALcall.
+ */
+static inline void alpha_write_pmc(int idx, unsigned long val)
+{
+	val &= alpha_pmu->pmc_count_mask[idx];
+	val <<= alpha_pmu->pmc_count_shift[idx];
+	val |= (1<<idx);
+	wrperfmon(PERFMON_CMD_WRITE, val);
+}
+
+static inline unsigned long alpha_read_pmc(int idx)
+{
+	unsigned long val;
+
+	val = wrperfmon(PERFMON_CMD_READ, 0);
+	val >>= alpha_pmu->pmc_count_shift[idx];
+	val &= alpha_pmu->pmc_count_mask[idx];
+	return val;
+}
+
+/* Set a new period to sample over */
+static int alpha_perf_event_set_period(struct perf_event *event,
+				struct hw_perf_event *hwc, int idx)
+{
+	long left = atomic64_read(&hwc->period_left);
+	long period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	/*
+	 * Hardware restrictions require that the counters must not be
+	 * written with values that are too close to the maximum period.
+	 */
+	if (unlikely(left < alpha_pmu->pmc_left[idx]))
+		left = alpha_pmu->pmc_left[idx];
+
+	if (left > (long)alpha_pmu->pmc_max_period[idx])
+		left = alpha_pmu->pmc_max_period[idx];
+
+	atomic64_set(&hwc->prev_count, (unsigned long)(-left));
+
+	alpha_write_pmc(idx, (unsigned long)(-left));
+
+	perf_event_update_userpage(event);
+
+	return ret;
+}
+
+
+/*
+ * Calculates the count (the 'delta') since the last time the PMC was read.
+ *
+ * As the PMCs' full period can easily be exceeded within the perf system
+ * sampling period we cannot use any high order bits as a guard bit in the
+ * PMCs to detect overflow as is done by other architectures.  The code here
+ * calculates the delta on the basis that there is no overflow when ovf is
+ * zero.  The value passed via ovf by the interrupt handler corrects for
+ * overflow.
+ *
+ * This can be racey on rare occasions -- a call to this routine can occur
+ * with an overflowed counter just before the PMI service routine is called.
+ * The check for delta negative hopefully always rectifies this situation.
+ */
+static unsigned long alpha_perf_event_update(struct perf_event *event,
+					struct hw_perf_event *hwc, int idx, long ovf)
+{
+	long prev_raw_count, new_raw_count;
+	long delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = alpha_read_pmc(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count  - (prev_raw_count & alpha_pmu->pmc_count_mask[idx])) + ovf;
+
+	/* It is possible on very rare occasions that the PMC has overflowed
+	 * but the interrupt is yet to come.  Detect and fix this situation.
+	 */
+	if (unlikely(delta < 0)) {
+		delta += alpha_pmu->pmc_max_period[idx] + 1;
+	}
+
+	atomic64_add(delta, &event->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+
+/*
+ * Collect all HW events into the array event[].
+ */
+static int collect_events(struct perf_event *group, int max_count,
+			  struct perf_event *event[], unsigned long *evtype,
+			  int *current_idx)
+{
+	struct perf_event *pe;
+	int n = 0;
+
+	if (!is_software_event(group)) {
+		if (n >= max_count)
+			return -1;
+		event[n] = group;
+		evtype[n] = group->hw.event_base;
+		current_idx[n++] = PMC_NO_INDEX;
+	}
+	list_for_each_entry(pe, &group->sibling_list, group_entry) {
+		if (!is_software_event(pe) && pe->state != PERF_EVENT_STATE_OFF) {
+			if (n >= max_count)
+				return -1;
+			event[n] = pe;
+			evtype[n] = pe->hw.event_base;
+			current_idx[n++] = PMC_NO_INDEX;
+		}
+	}
+	return n;
+}
+
+
+
+/*
+ * Check that a group of events can be simultaneously scheduled on to the PMU.
+ */
+static int alpha_check_constraints(struct perf_event **events,
+				   unsigned long *evtypes, int n_ev)
+{
+
+	/* No HW events is possible from hw_perf_group_sched_in(). */
+	if (n_ev == 0)
+		return 0;
+
+	if (n_ev > alpha_pmu->num_pmcs)
+		return -1;
+
+	return alpha_pmu->check_constraints(events, evtypes, n_ev);
+}
+
+
+/*
+ * If new events have been scheduled then update cpuc with the new
+ * configuration.  This may involve shifting cycle counts from one PMC to
+ * another.
+ */
+static void maybe_change_configuration(struct cpu_hw_events *cpuc)
+{
+	int j;
+
+	if (cpuc->n_added == 0)
+		return;
+
+	/* Find counters that are moving to another PMC and update */
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+
+		if (cpuc->current_idx[j] != PMC_NO_INDEX &&
+			cpuc->current_idx[j] != pe->hw.idx) {
+			alpha_perf_event_update(pe, &pe->hw, cpuc->current_idx[j], 0);
+			cpuc->current_idx[j] = PMC_NO_INDEX;
+		}
+	}
+
+	/* Assign to counters all unassigned events. */
+	cpuc->idx_mask = 0;
+	for (j = 0; j < cpuc->n_events; j++) {
+		struct perf_event *pe = cpuc->event[j];
+		struct hw_perf_event *hwc = &pe->hw;
+		int idx = hwc->idx;
+
+		if (cpuc->current_idx[j] != PMC_NO_INDEX) {
+			cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
+			continue;
+		}
+
+		alpha_perf_event_set_period(pe, hwc, idx);
+		cpuc->current_idx[j] = idx;
+		cpuc->idx_mask |= (1<<cpuc->current_idx[j]);
+	}
+	cpuc->config = cpuc->event[0]->hw.config_base;
+}
+
+
+
+/* Schedule perf HW event on to PMU.
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static int alpha_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	int n0;
+	int ret;
+	unsigned long flags;
+
+	/*
+	 * The Sparc code has the IRQ disable first followed by the perf
+	 * disable, however this can lead to an overflowed counter with the
+	 * PMI disabled on rare occasions.  The alpha_perf_event_update()
+	 * routine should detect this situation by noting a negative delta,
+	 * nevertheless we disable the PMCs first to enable a potential
+	 * final PMI to occur before we disable interrupts.
+	 */
+	perf_disable();
+	local_irq_save(flags);
+
+	/* Default to error to be returned */
+	ret = -EAGAIN;
+
+	/* Insert event on to PMU and if successful modify ret to valid return */
+	n0 = cpuc->n_events;
+	if (n0 < alpha_pmu->num_pmcs) {
+		cpuc->event[n0] = event;
+		cpuc->evtype[n0] = event->hw.event_base;
+		cpuc->current_idx[n0] = PMC_NO_INDEX;
+
+		if (!alpha_check_constraints(cpuc->event, cpuc->evtype, n0+1)) {
+			cpuc->n_events++;
+			cpuc->n_added++;
+			ret = 0;
+		}
+	}
+
+	local_irq_restore(flags);
+	perf_enable();
+
+	return ret;
+}
+
+
+
+/* Disable performance monitoring unit
+ *  - this function is called from outside this module via the pmu struct
+ *    returned from perf event initialisation.
+ */
+static void alpha_pmu_disable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned long flags;
+	int j;
+
+	perf_disable();
+	local_irq_save(flags);
+
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (event == cpuc->event[j]) {
+			int idx = cpuc->current_idx[j];
+
+			/* Shift remaining entries down into the existing
+			 * slot.
+			 */
+			while (++j < cpuc->n_events) {
+				cpuc->event[j - 1] = cpuc->event[j];
+				cpuc->evtype[j - 1] = cpuc->evtype[j];
+				cpuc->current_idx[j - 1] =
+					cpuc->current_idx[j];
+			}
+
+			/* Absorb the final count and turn off the event. */
+			alpha_perf_event_update(event, hwc, idx, 0);
+			perf_event_update_userpage(event);
+
+			cpuc->idx_mask &= ~(1UL<<idx);
+			cpuc->n_events--;
+			break;
+		}
+	}
+
+	local_irq_restore(flags);
+	perf_enable();
+}
+
+
+static void alpha_pmu_read(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	alpha_perf_event_update(event, hwc, hwc->idx, 0);
+}
+
+
+static void alpha_pmu_unthrottle(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->idx_mask |= 1UL<<hwc->idx;
+	wrperfmon(PERFMON_CMD_ENABLE, (1UL<<hwc->idx));
+}
+
+
+/*
+ * Check that CPU performance counters are supported.
+ * - currently support EV67 and later CPUs.
+ * - actually some later revisions of the EV6 have the same PMC model as the
+ *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     Bad luck to the very few people who might have one, I guess.
+ */
+static int supported_cpu(void)
+{
+	struct percpu_struct *cpu;
+	unsigned long cputype;
+
+	/* Get cpu type from HW */
+	cpu = (struct percpu_struct *)((char *)hwrpb + hwrpb->processor_offset);
+	cputype = cpu->type & 0xffffffff;
+	/* Include all of EV67, EV68, EV7, EV79 and EV69 as supported. */
+	return (cputype >= EV67_CPU) && (cputype <= EV69_CPU);
+}
+
+
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+	/* Nothing to be done! */
+	return;
+}
+
+
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+	struct perf_event_attr *attr = &event->attr;
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_event *evts[MAX_HWEVENTS];
+	unsigned long evtypes[MAX_HWEVENTS];
+	int idx_rubbish_bin[MAX_HWEVENTS];
+	int ev;
+	int n;
+
+	/* We only support a limited range of HARDWARE event types with one
+	 * only programmable via a RAW event type.
+	 */
+	if (attr->type == PERF_TYPE_HARDWARE) {
+		if (attr->config >= alpha_pmu->max_events)
+			return -EINVAL;
+		ev = alpha_pmu->event_map[attr->config];
+	} else if (attr->type == PERF_TYPE_HW_CACHE) {
+		return -EOPNOTSUPP;
+	} else if (attr->type == PERF_TYPE_RAW) {
+		ev = attr->config & 0xff;
+	} else {
+		return -EOPNOTSUPP;
+	}
+
+	if (ev < 0) {
+		return ev;
+	}
+
+	/* The EV67 does not support mode exclusion */
+	if (attr->exclude_kernel || attr->exclude_user
+			|| attr->exclude_hv || attr->exclude_idle) {
+		return -EPERM;
+	}
+
+	/*
+	 * We place the event type in event_base here and leave calculation
+	 * of the codes to programme the PMU for alpha_pmu_enable() because
+	 * it is only then we will know what HW events are actually
+	 * scheduled on to the PMU.  At that point the code to programme the
+	 * PMU is put into config_base and the PMC to use is placed into
+	 * idx.  We initialise idx (below) to PMC_NO_INDEX to indicate that
+	 * it is yet to be determined.
+	 */
+	hwc->event_base = ev;
+
+	/* Collect events in a group together suitable for calling
+	 * alpha_check_constraints() to verify that the group as a whole can
+	 * be scheduled on to the PMU.
+	 */
+	n = 0;
+	if (event->group_leader != event) {
+		n = collect_events(event->group_leader,
+				alpha_pmu->num_pmcs - 1,
+				evts, evtypes, idx_rubbish_bin);
+		if (n < 0)
+			return -EINVAL;
+	}
+	evtypes[n] = hwc->event_base;
+	evts[n] = event;
+
+	if (alpha_check_constraints(evts, evtypes, n + 1))
+		return -EINVAL;
+
+	/* Indicate that PMU config and idx are yet to be determined. */
+	hwc->config_base = 0;
+	hwc->idx = PMC_NO_INDEX;
+
+	event->destroy = hw_perf_event_destroy;
+
+	/*
+	 * Most architectures reserve the PMU for their use at this point.
+	 * As there is no existing mechanism to arbitrate usage and there
+	 * appears to be no other user of the Alpha PMU we just assume
+	 * that we can just use it, hence a NO-OP here.
+	 *
+	 * Maybe an alpha_reserve_pmu() routine should be implemented but is
+	 * anything else ever going to use it?
+	 */
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = alpha_pmu->pmc_max_period[0];
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	return 0;
+}
+
+static const struct pmu pmu = {
+	.enable		= alpha_pmu_enable,
+	.disable	= alpha_pmu_disable,
+	.read		= alpha_pmu_read,
+	.unthrottle	= alpha_pmu_unthrottle,
+};
+
+
+/*
+ * Main entry point to initialise a HW performance event.
+ */
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+	int err;
+
+	if (!alpha_pmu)
+		return ERR_PTR(-ENODEV);
+
+	/* Do the real initialisation work. */
+	err = __hw_perf_event_init(event);
+
+	if (err)
+		return ERR_PTR(err);
+
+	return &pmu;
+}
+
+
+
+/*
+ * Main entry point - enable HW performance counters.
+ */
+void hw_perf_enable(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	if (cpuc->n_events > 0) {
+		/* Update cpuc with information from any new scheduled events. */
+		maybe_change_configuration(cpuc);
+
+		/* Start counting the desired events. */
+		wrperfmon(PERFMON_CMD_LOGGING_OPTIONS, EV67_PCTR_MODE_AGGREGATE);
+		wrperfmon(PERFMON_CMD_DESIRED_EVENTS, cpuc->config);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+	}
+}
+
+
+/*
+ * Main entry point - disable HW performance counters.
+ */
+
+void hw_perf_disable(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	cpuc->n_added = 0;
+
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+}
+
+
+/*
+ * Main entry point - don't know when this is called but it
+ * obviously dumps debug info.
+ */
+void perf_event_print_debug(void)
+{
+	unsigned long flags;
+	unsigned long pcr;
+	int pcr0, pcr1;
+	int cpu;
+
+	if (!supported_cpu())
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = wrperfmon(PERFMON_CMD_READ, 0);
+	pcr0 = (pcr >> alpha_pmu->pmc_count_shift[0]) & alpha_pmu->pmc_count_mask[0];
+	pcr1 = (pcr >> alpha_pmu->pmc_count_shift[1]) & alpha_pmu->pmc_count_mask[1];
+
+	pr_info("CPU#%d: PCTR0[%06x] PCTR1[%06x]\n", cpu, pcr0, pcr1);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Performance Monitoring Interrupt Service Routine called when a PMC
+ * overflows.  The PMC that overflowed is passed in la_ptr.
+ */
+static void alpha_perf_event_irq_handler(unsigned long la_ptr,
+					struct pt_regs *regs)
+{
+	struct cpu_hw_events *cpuc;
+	struct perf_sample_data data;
+	struct perf_event *event;
+	struct hw_perf_event *hwc;
+	int idx, j;
+
+	__get_cpu_var(irq_pmi_count)++;
+	cpuc = &__get_cpu_var(cpu_hw_events);
+
+	/* Completely counting through the PMC's period to trigger a new PMC
+	 * overflow interrupt while in this interrupt routine is utterly
+	 * disastrous!  The EV6 and EV67 counters are sufficiently large to
+	 * prevent this but to be really sure disable the PMCs.
+	 */
+	wrperfmon(PERFMON_CMD_DISABLE, cpuc->idx_mask);
+
+	/* la_ptr is the counter that overflowed. */
+	if (unlikely(la_ptr >= perf_max_events)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warning("PMI: silly index %ld\n", la_ptr);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	idx = la_ptr;
+
+	perf_sample_data_init(&data, 0);
+	for (j = 0; j < cpuc->n_events; j++) {
+		if (cpuc->current_idx[j] == idx)
+			break;
+	}
+
+	if (unlikely(j == cpuc->n_events)) {
+		/* This can occur if the event is disabled right on a PMC overflow. */
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	event = cpuc->event[j];
+
+	if (unlikely(!event)) {
+		/* This should never occur! */
+		irq_err_count++;
+		pr_warning("PMI: No event at index %d!\n", idx);
+		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+		return;
+	}
+
+	hwc = &event->hw;
+	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
+	data.period = event->hw.last_period;
+
+	if (alpha_perf_event_set_period(event, hwc, idx)) {
+		if (perf_event_overflow(event, 1, &data, regs)) {
+			/* Interrupts coming too quickly; "throttle" the
+			 * counter, i.e., disable it for a little while.
+			 */
+			cpuc->idx_mask &= ~(1UL<<idx);
+		}
+	}
+	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
+
+	return;
+}
+
+
+
+/*
+ * Init call to initialise performance events at kernel startup.
+ */
+void __init init_hw_perf_events(void)
+{
+	pr_info("Performance events: ");
+
+	if (!supported_cpu()) {
+		pr_cont("No support for your CPU.\n");
+		return;
+	}
+
+	pr_cont("Supported CPU type!\n");
+
+	/* Override performance counter IRQ vector */
+
+	perf_irq = alpha_perf_event_irq_handler;
+
+	/* And set up PMU specification */
+	alpha_pmu = &ev67_pmu;
+	perf_max_events = alpha_pmu->num_pmcs;
+}
+
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 1efbed82c0f..eacceb26d9c 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -41,6 +41,7 @@
 #include <linux/init.h>
 #include <linux/bcd.h>
 #include <linux/profile.h>
+#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -82,6 +83,26 @@ static struct {
 
 unsigned long est_cycle_freq;
 
+#ifdef CONFIG_PERF_EVENTS
+
+DEFINE_PER_CPU(u8, perf_event_pending);
+
+#define set_perf_event_pending_flag()  __get_cpu_var(perf_event_pending) = 1
+#define test_perf_event_pending()      __get_cpu_var(perf_event_pending)
+#define clear_perf_event_pending()     __get_cpu_var(perf_event_pending) = 0
+
+void set_perf_event_pending(void)
+{
+	set_perf_event_pending_flag();
+}
+
+#else  /* CONFIG_PERF_EVENTS */
+
+#define test_perf_event_pending()      0
+#define clear_perf_event_pending()
+
+#endif /* CONFIG_PERF_EVENTS */
+
 
 static inline __u32 rpcc(void)
 {
@@ -175,6 +196,11 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 		update_process_times(user_mode(get_irq_regs()));
 #endif
 
+	if (test_perf_event_pending()) {
+		clear_perf_event_pending();
+		perf_event_do_pending();
+	}
+
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e39caa8b0c9..232f0c75825 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -43,10 +43,6 @@ config SYS_SUPPORTS_APM_EMULATION
 config GENERIC_GPIO
 	bool
 
-config GENERIC_TIME
-	bool
-	default y
-
 config ARCH_USES_GETTIMEOFFSET
 	bool
 	default n
@@ -562,6 +558,18 @@ config ARCH_NUC93X
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
 	  low-power and high performance MPEG-4/JPEG multimedia controller chip.
 
+config ARCH_TEGRA
+	bool "NVIDIA Tegra"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select ARCH_HAS_BARRIERS if CACHE_L2X0
+	help
+	  This enables support for NVIDIA Tegra based systems (Tegra APX,
+	  Tegra 6xx and Tegra 2 series).
+
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
@@ -911,6 +919,8 @@ source "arch/arm/mach-shmobile/Kconfig"
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+source "arch/arm/mach-tegra/Kconfig"
+
 source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
@@ -1098,10 +1108,11 @@ config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || \
+		 ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1171,9 +1182,10 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
 		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
-		ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+		ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_TEGRA)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || \\
+		ARCH_U8500 || ARCH_TEGRA
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 63d998e8c67..a8d4dca9da3 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -179,6 +179,7 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
+machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
deleted file mode 100644
index ad2bc503f2b..00000000000
--- a/arch/arm/configs/am3517_evm_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3517EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
-CONFIG_CAN_TI_HECC=y
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
deleted file mode 100644
index 8bb06334ce9..00000000000
--- a/arch/arm/configs/cm_t35_defconfig
+++ /dev/null
@@ -1,157 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_CM_T35=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/devkit8000_defconfig b/arch/arm/configs/devkit8000_defconfig
deleted file mode 100644
index 786cbe49528..00000000000
--- a/arch/arm/configs/devkit8000_defconfig
+++ /dev/null
@@ -1,184 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_BT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
deleted file mode 100644
index fcda057d584..00000000000
--- a/arch/arm/configs/igep0020_defconfig
+++ /dev/null
@@ -1,179 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=14
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_IGEP0020=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
deleted file mode 100644
index aa24172a3e2..00000000000
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
deleted file mode 100644
index 3b072e8e71f..00000000000
--- a/arch/arm/configs/omap3_evm_defconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
deleted file mode 100644
index d5a62268937..00000000000
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ /dev/null
@@ -1,158 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_TPO_TD043MTEA1=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_PERIPHERAL=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CIFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/omap3_stalker_lks_defconfig b/arch/arm/configs/omap3_stalker_lks_defconfig
deleted file mode 100644
index 1d1ab0b0b71..00000000000
--- a/arch/arm/configs/omap3_stalker_lks_defconfig
+++ /dev/null
@@ -1,150 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_SBC3530=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
deleted file mode 100644
index e988eccc93a..00000000000
--- a/arch/arm/configs/omap3_touchbook_defconfig
+++ /dev/null
@@ -1,621 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_TOUCHBOOK=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTSDIO=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_BT_HCIBFUSB=y
-CONFIG_AF_RXRPC=m
-CONFIG_CFG80211=m
-CONFIG_LIB80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_WIMAX=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_93CX6=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_BQ27x00=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-# CONFIG_SND_ARM is not set
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ZERO_HNPTEST=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
deleted file mode 100644
index 0cf4147a936..00000000000
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ /dev/null
@@ -1,136 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MUX_WARNINGS is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP2430=y
-CONFIG_MACH_OMAP_2430SDP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=m
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
deleted file mode 100644
index 5dbe595999b..00000000000
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ /dev/null
@@ -1,178 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
deleted file mode 100644
index 8e8f4e94609..00000000000
--- a/arch/arm/configs/omap_3630sdp_defconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3630SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
deleted file mode 100644
index 0b24858f5d4..00000000000
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ /dev/null
@@ -1,92 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_HID is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
deleted file mode 100644
index 858f93aac2b..00000000000
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ /dev/null
@@ -1,107 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_H4=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_MENELAUS=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
deleted file mode 100644
index c7bb558316d..00000000000
--- a/arch/arm/configs/omap_ldp_defconfig
+++ /dev/null
@@ -1,135 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
deleted file mode 100644
index 0a7ed449cde..00000000000
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ /dev/null
@@ -1,143 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
deleted file mode 100644
index f8085b0b9ec..00000000000
--- a/arch/arm/configs/omap_zoom3_defconfig
+++ /dev/null
@@ -1,155 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
deleted file mode 100644
index 6fa1b14a7a9..00000000000
--- a/arch/arm/configs/overo_defconfig
+++ /dev/null
@@ -1,275 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OVERO=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
deleted file mode 100644
index ffaef43ec0b..00000000000
--- a/arch/arm/configs/rx51_defconfig
+++ /dev/null
@@ -1,222 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_NOKIA_RX51=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_PHONET=y
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_WATCHDOG=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_ACX565AKM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_HID=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_NOKIA=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_OMAP_HS=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_TWL4030=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_LOCK_STAT=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index feb988a7ec3..5aff5812660 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -36,7 +36,7 @@ extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
 extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page, enum km_type type);
-extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
 extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
 extern struct page *kmap_atomic_to_page(const void *ptr);
 #endif
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
index 67af4b84198..08265993227 100644
--- a/arch/arm/include/asm/kgdb.h
+++ b/arch/arm/include/asm/kgdb.h
@@ -70,11 +70,11 @@ extern int kgdb_fault_expected;
 #define _GP_REGS		16
 #define _FP_REGS		8
 #define _EXTRA_REGS		2
-#define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+#define DBG_MAX_REG_NUM		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
 
 #define KGDB_MAX_NO_CPUS	1
 #define BUFMAX			400
-#define NUMREGBYTES		(GDB_MAX_REGS << 2)
+#define NUMREGBYTES		(DBG_MAX_REG_NUM << 2)
 #define NUMCRITREGBYTES		(32 << 2)
 
 #define _R0			0
@@ -93,7 +93,7 @@ extern int kgdb_fault_expected;
 #define _SPT			13
 #define _LR			14
 #define _PC			15
-#define _CPSR			(GDB_MAX_REGS - 1)
+#define _CPSR			(DBG_MAX_REG_NUM - 1)
 
 /*
  * So that we can denote the end of a frame for tracing,
diff --git a/arch/arm/include/asm/local64.h b/arch/arm/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/arm/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index c868a886411..778c2f7024f 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -10,57 +10,62 @@
  *           Deepak Saxena <dsaxena@plexity.net>
  */
 #include <linux/irq.h>
+#include <linux/kdebug.h>
 #include <linux/kgdb.h>
 #include <asm/traps.h>
 
-/* Make a local copy of the registers passed into the handler (bletch) */
-void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
 {
-	int regno;
-
-	/* Initialize all to zero. */
-	for (regno = 0; regno < GDB_MAX_REGS; regno++)
-		gdb_regs[regno] = 0;
+	{ "r0", 4, offsetof(struct pt_regs, ARM_r0)},
+	{ "r1", 4, offsetof(struct pt_regs, ARM_r1)},
+	{ "r2", 4, offsetof(struct pt_regs, ARM_r2)},
+	{ "r3", 4, offsetof(struct pt_regs, ARM_r3)},
+	{ "r4", 4, offsetof(struct pt_regs, ARM_r4)},
+	{ "r5", 4, offsetof(struct pt_regs, ARM_r5)},
+	{ "r6", 4, offsetof(struct pt_regs, ARM_r6)},
+	{ "r7", 4, offsetof(struct pt_regs, ARM_r7)},
+	{ "r8", 4, offsetof(struct pt_regs, ARM_r8)},
+	{ "r9", 4, offsetof(struct pt_regs, ARM_r9)},
+	{ "r10", 4, offsetof(struct pt_regs, ARM_r10)},
+	{ "fp", 4, offsetof(struct pt_regs, ARM_fp)},
+	{ "ip", 4, offsetof(struct pt_regs, ARM_ip)},
+	{ "sp", 4, offsetof(struct pt_regs, ARM_sp)},
+	{ "lr", 4, offsetof(struct pt_regs, ARM_lr)},
+	{ "pc", 4, offsetof(struct pt_regs, ARM_pc)},
+	{ "f0", 12, -1 },
+	{ "f1", 12, -1 },
+	{ "f2", 12, -1 },
+	{ "f3", 12, -1 },
+	{ "f4", 12, -1 },
+	{ "f5", 12, -1 },
+	{ "f6", 12, -1 },
+	{ "f7", 12, -1 },
+	{ "fps", 4, -1 },
+	{ "cpsr", 4, offsetof(struct pt_regs, ARM_cpsr)},
+};
 
-	gdb_regs[_R0]		= kernel_regs->ARM_r0;
-	gdb_regs[_R1]		= kernel_regs->ARM_r1;
-	gdb_regs[_R2]		= kernel_regs->ARM_r2;
-	gdb_regs[_R3]		= kernel_regs->ARM_r3;
-	gdb_regs[_R4]		= kernel_regs->ARM_r4;
-	gdb_regs[_R5]		= kernel_regs->ARM_r5;
-	gdb_regs[_R6]		= kernel_regs->ARM_r6;
-	gdb_regs[_R7]		= kernel_regs->ARM_r7;
-	gdb_regs[_R8]		= kernel_regs->ARM_r8;
-	gdb_regs[_R9]		= kernel_regs->ARM_r9;
-	gdb_regs[_R10]		= kernel_regs->ARM_r10;
-	gdb_regs[_FP]		= kernel_regs->ARM_fp;
-	gdb_regs[_IP]		= kernel_regs->ARM_ip;
-	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
-	gdb_regs[_LR]		= kernel_regs->ARM_lr;
-	gdb_regs[_PC]		= kernel_regs->ARM_pc;
-	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	else
+		memset(mem, 0, dbg_reg_def[regno].size);
+	return dbg_reg_def[regno].name;
 }
 
-/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
-void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
 {
-	kernel_regs->ARM_r0	= gdb_regs[_R0];
-	kernel_regs->ARM_r1	= gdb_regs[_R1];
-	kernel_regs->ARM_r2	= gdb_regs[_R2];
-	kernel_regs->ARM_r3	= gdb_regs[_R3];
-	kernel_regs->ARM_r4	= gdb_regs[_R4];
-	kernel_regs->ARM_r5	= gdb_regs[_R5];
-	kernel_regs->ARM_r6	= gdb_regs[_R6];
-	kernel_regs->ARM_r7	= gdb_regs[_R7];
-	kernel_regs->ARM_r8	= gdb_regs[_R8];
-	kernel_regs->ARM_r9	= gdb_regs[_R9];
-	kernel_regs->ARM_r10	= gdb_regs[_R10];
-	kernel_regs->ARM_fp	= gdb_regs[_FP];
-	kernel_regs->ARM_ip	= gdb_regs[_IP];
-	kernel_regs->ARM_sp	= gdb_regs[_SPT];
-	kernel_regs->ARM_lr	= gdb_regs[_LR];
-	kernel_regs->ARM_pc	= gdb_regs[_PC];
-	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
 }
 
 void
@@ -176,6 +181,33 @@ void kgdb_roundup_cpus(unsigned long flags)
        local_irq_disable();
 }
 
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	struct pt_regs *regs = args->regs;
+
+	if (kgdb_handle_exception(1, args->signr, cmd, regs))
+		return NOTIFY_DONE;
+	return NOTIFY_STOP;
+}
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __kgdb_notify(ptr, cmd);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+	.priority	= -INT_MAX,
+};
+
+
 /**
  *	kgdb_arch_init - Perform any architecture specific initalization.
  *
@@ -184,6 +216,11 @@ void kgdb_roundup_cpus(unsigned long flags)
  */
 int kgdb_arch_init(void)
 {
+	int ret = register_die_notifier(&kgdb_notifier);
+
+	if (ret != 0)
+		return ret;
+
 	register_undef_hook(&kgdb_brkpt_hook);
 	register_undef_hook(&kgdb_compiled_brkpt_hook);
 
@@ -200,6 +237,7 @@ void kgdb_arch_exit(void)
 {
 	unregister_undef_hook(&kgdb_brkpt_hook);
 	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_die_notifier(&kgdb_notifier);
 }
 
 /*
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index de12536d687..417c392ddf1 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -164,20 +164,20 @@ armpmu_event_set_period(struct perf_event *event,
 			struct hw_perf_event *hwc,
 			int idx)
 {
-	s64 left = atomic64_read(&hwc->period_left);
+	s64 left = local64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
 	if (unlikely(left <= -period)) {
 		left = period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 
 	if (unlikely(left <= 0)) {
 		left += period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
@@ -185,7 +185,7 @@ armpmu_event_set_period(struct perf_event *event,
 	if (left > (s64)armpmu->max_period)
 		left = armpmu->max_period;
 
-	atomic64_set(&hwc->prev_count, (u64)-left);
+	local64_set(&hwc->prev_count, (u64)-left);
 
 	armpmu->write_counter(idx, (u64)(-left) & 0xffffffff);
 
@@ -204,18 +204,18 @@ armpmu_event_update(struct perf_event *event,
 	u64 delta;
 
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	new_raw_count = armpmu->read_counter(idx);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
 	delta = (new_raw_count << shift) - (prev_raw_count << shift);
 	delta >>= shift;
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
 
 	return new_raw_count;
 }
@@ -478,7 +478,7 @@ __hw_perf_event_init(struct perf_event *event)
 	if (!hwc->sample_period) {
 		hwc->sample_period  = armpmu->max_period;
 		hwc->last_period    = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
+		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
 	err = 0;
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 0316e201ada..71f90f86474 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -50,6 +50,11 @@ config ARCH_DAVINCI_DM365
 	select AINTC
 	select ARCH_DAVINCI_DMx
 
+config ARCH_DAVINCI_TNETV107X
+	select CPU_V6
+	select CP_INTC
+	bool "TNETV107X based system"
+
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
@@ -173,6 +178,13 @@ config DA850_UI_RMII
 
 endchoice
 
+config MACH_TNETV107X
+	bool "TI TNETV107X Reference Platform"
+	default ARCH_DAVINCI_TNETV107X
+	depends on ARCH_DAVINCI_TNETV107X
+	help
+	  Say Y here to select the TI TNETV107X Evaluation Module.
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 6aac880eb79..eab4c0fd667 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -16,6 +16,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += gpio-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -30,6 +32,7 @@ obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o cdce949.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
+obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 
 # Power Management
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 212d97084bd..c3994f341e4 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -208,7 +208,7 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
 	.tdm_slots      = 2,
 	.serial_dir     = da830_iis_serializer_direction,
-	.eventq_no      = EVENTQ_0,
+	.asp_chan_q     = EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
@@ -494,12 +494,42 @@ static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
 	.bus_delay	= 0,	/* usec */
 };
 
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
+ * they are being reserved for codecs on the DSP side.
+ */
+static const s16 da830_dma_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 8,  2},
+	{12,  2},
+	{24,  4},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da830_dma_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 8,  2},
+	{12,  2},
+	{24,  4},
+	{30, 26},
+	{-1, -1}
+};
+
+static struct edma_rsv_info da830_edma_rsv[] = {
+	{
+		.rsv_chans	= da830_dma_rsv_chans,
+		.rsv_slots	= da830_dma_rsv_slots,
+	},
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	int ret;
 
-	ret = da8xx_register_edma();
+	ret = da830_register_edma(da830_edma_rsv);
 	if (ret)
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b280efb1fa1..fdc2cc500fc 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -343,7 +343,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.eventq_no	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_1,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,
@@ -637,6 +637,56 @@ static int __init da850_evm_config_emac(void)
 }
 device_initcall(da850_evm_config_emac);
 
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
+ * they are being reserved for codecs on the DSP side.
+ */
+static const s16 da850_dma0_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 8,  6},
+	{24,  4},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da850_dma0_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 8,  6},
+	{24,  4},
+	{30, 50},
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 0, 28},
+	{30,  2},
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 0, 28},
+	{30, 90},
+	{-1, -1}
+};
+
+static struct edma_rsv_info da850_edma_cc0_rsv = {
+	.rsv_chans	= da850_dma0_rsv_chans,
+	.rsv_slots	= da850_dma0_rsv_slots,
+};
+
+static struct edma_rsv_info da850_edma_cc1_rsv = {
+	.rsv_chans	= da850_dma1_rsv_chans,
+	.rsv_slots	= da850_dma1_rsv_slots,
+};
+
+static struct edma_rsv_info *da850_edma_rsv[2] = {
+	&da850_edma_cc0_rsv,
+	&da850_edma_cc1_rsv,
+};
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -646,7 +696,7 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
 				ret);
 
-	ret = da8xx_register_edma();
+	ret = da850_register_edma(da850_edma_rsv);
 	if (ret)
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
 				ret);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6d8889342c9..4502f346b2b 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -323,7 +323,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 		.tdm_slots      = 2,
 		.serial_dir     = dm646x_iis_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 	{
 		.tx_dma_offset  = 0x400,
@@ -332,7 +332,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 		.tdm_slots      = 32,
 		.serial_dir     = dm646x_dit_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 };
 
@@ -721,6 +721,39 @@ static struct davinci_uart_config uart_config __initdata = {
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+/*
+ * The following EDMA channels/slots are not being used by drivers (for
+ * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
+ * reserved for codecs on the DSP side.
+ */
+static const s16 dm646x_dma_rsv_chans[][2] = {
+	/* (offset, number) */
+	{ 0,  4},
+	{13,  3},
+	{24,  4},
+	{30,  2},
+	{54,  3},
+	{-1, -1}
+};
+
+static const s16 dm646x_dma_rsv_slots[][2] = {
+	/* (offset, number) */
+	{ 0,  4},
+	{13,  3},
+	{24,  4},
+	{30,  2},
+	{54,  3},
+	{128, 384},
+	{-1, -1}
+};
+
+static struct edma_rsv_info dm646x_edma_rsv[] = {
+	{
+		.rsv_chans	= dm646x_dma_rsv_chans,
+		.rsv_slots	= dm646x_dma_rsv_slots,
+	},
+};
+
 static __init void evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -732,6 +765,8 @@ static __init void evm_init(void)
 
 	platform_device_register(&davinci_nand_device);
 
+	dm646x_init_edma(dm646x_edma_rsv);
+
 	if (HAS_ATA)
 		davinci_init_ide();
 
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
new file mode 100644
index 00000000000..fe2a9d9c8bb
--- /dev/null
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -0,0 +1,174 @@
+/*
+ * Texas Instruments TNETV107X EVM Board Support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/ratelimit.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+#include <mach/cp_intc.h>
+#include <mach/tnetv107x.h>
+
+#define EVM_MMC_WP_GPIO		21
+#define EVM_MMC_CD_GPIO		24
+
+static int initialize_gpio(int gpio, char *desc)
+{
+	int ret;
+
+	ret = gpio_request(gpio, desc);
+	if (ret < 0) {
+		pr_err_ratelimited("cannot open %s gpio\n", desc);
+		return -ENOSYS;
+	}
+	gpio_direction_input(gpio);
+	return gpio;
+}
+
+static int mmc_get_cd(int index)
+{
+	static int gpio;
+
+	if (!gpio)
+		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpio_get_value(gpio) ? 0 : 1;
+}
+
+static int mmc_get_ro(int index)
+{
+	static int gpio;
+
+	if (!gpio)
+		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpio_get_value(gpio) ? 1 : 0;
+}
+
+static struct davinci_mmc_config mmc_config = {
+	.get_cd		= mmc_get_cd,
+	.get_ro		= mmc_get_ro,
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+static const short sdio1_pins[] __initdata = {
+	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
+	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
+	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
+	TNETV107X_GPIO21,		TNETV107X_GPIO24,
+	-1
+};
+
+static const short uart1_pins[] __initdata = {
+	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
+	-1
+};
+
+static struct mtd_partition nand_partitions[] = {
+	/* bootloader (U-Boot, etc) in first 12 sectors */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= (12*SZ_128K),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+static struct davinci_nand_pdata nand_config = {
+	.mask_cle	= 0x4000,
+	.mask_ale	= 0x2000,
+	.parts		= nand_partitions,
+	.nr_parts	= ARRAY_SIZE(nand_partitions),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+	.ecc_bits	= 1,
+};
+
+static struct davinci_uart_config serial_config __initconst = {
+	.enabled_uarts	= BIT(1),
+};
+
+static struct tnetv107x_device_info evm_device_info __initconst = {
+	.serial_config		= &serial_config,
+	.mmc_config[1]		= &mmc_config,	/* controller 1 */
+	.nand_config[0]		= &nand_config,	/* chip select 0 */
+};
+
+static __init void tnetv107x_evm_board_init(void)
+{
+	davinci_cfg_reg_list(sdio1_pins);
+	davinci_cfg_reg_list(uart1_pins);
+
+	tnetv107x_devices_init(&evm_device_info);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init tnetv107x_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 0, "115200");
+}
+console_initcall(tnetv107x_evm_console_init);
+#endif
+
+MACHINE_START(TNETV107X, "TNETV107X EVM")
+	.phys_io	= TNETV107X_IO_BASE,
+	.io_pg_offst	= (TNETV107X_IO_VIRT >> 18) & 0xfffc,
+	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
+	.map_io		= tnetv107x_init,
+	.init_irq	= cp_intc_init,
+	.timer		= &davinci_timer,
+	.init_machine	= tnetv107x_evm_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 23e9eda5a37..ec23ab47362 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -1024,7 +1024,6 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EVTOUT4]		= 7,
 	[IRQ_DA8XX_EVTOUT5]		= 7,
 	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
 	[IRQ_DA8XX_EVTOUT7]		= 7,
 	[IRQ_DA8XX_CCINT0]		= 7,
 	[IRQ_DA8XX_CCERRINT]		= 7,
@@ -1042,11 +1041,7 @@ static u8 da830_default_priorities[DA830_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_TINT34_1]		= 7,
 	[IRQ_DA8XX_UARTINT0]		= 7,
 	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA8XX_SECINT]		= 7,
-	[IRQ_DA8XX_SECKEYERR]		= 7,
 	[IRQ_DA830_MPUERR]		= 7,
-	[IRQ_DA830_IOPUERR]		= 7,
-	[IRQ_DA830_BOOTCFGERR]		= 7,
 	[IRQ_DA8XX_CHIPINT0]		= 7,
 	[IRQ_DA8XX_CHIPINT1]		= 7,
 	[IRQ_DA8XX_CHIPINT2]		= 7,
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 6b8331bf8cf..68ed58a4825 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -643,7 +643,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EVTOUT4]		= 7,
 	[IRQ_DA8XX_EVTOUT5]		= 7,
 	[IRQ_DA8XX_EVTOUT6]		= 7,
-	[IRQ_DA8XX_EVTOUT6]		= 7,
 	[IRQ_DA8XX_EVTOUT7]		= 7,
 	[IRQ_DA8XX_CCINT0]		= 7,
 	[IRQ_DA8XX_CCERRINT]		= 7,
@@ -661,27 +660,7 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_TINT34_1]		= 7,
 	[IRQ_DA8XX_UARTINT0]		= 7,
 	[IRQ_DA8XX_KEYMGRINT]		= 7,
-	[IRQ_DA8XX_SECINT]		= 7,
-	[IRQ_DA8XX_SECKEYERR]		= 7,
 	[IRQ_DA850_MPUADDRERR0]		= 7,
-	[IRQ_DA850_MPUPROTERR0]		= 7,
-	[IRQ_DA850_IOPUADDRERR0]	= 7,
-	[IRQ_DA850_IOPUPROTERR0]	= 7,
-	[IRQ_DA850_IOPUADDRERR1]	= 7,
-	[IRQ_DA850_IOPUPROTERR1]	= 7,
-	[IRQ_DA850_IOPUADDRERR2]	= 7,
-	[IRQ_DA850_IOPUPROTERR2]	= 7,
-	[IRQ_DA850_BOOTCFG_ADDR_ERR]	= 7,
-	[IRQ_DA850_BOOTCFG_PROT_ERR]	= 7,
-	[IRQ_DA850_MPUADDRERR1]		= 7,
-	[IRQ_DA850_MPUPROTERR1]		= 7,
-	[IRQ_DA850_IOPUADDRERR3]	= 7,
-	[IRQ_DA850_IOPUPROTERR3]	= 7,
-	[IRQ_DA850_IOPUADDRERR4]	= 7,
-	[IRQ_DA850_IOPUPROTERR4]	= 7,
-	[IRQ_DA850_IOPUADDRERR5]	= 7,
-	[IRQ_DA850_IOPUPROTERR5]	= 7,
-	[IRQ_DA850_MIOPU_BOOTCFG_ERR]	= 7,
 	[IRQ_DA8XX_CHIPINT0]		= 7,
 	[IRQ_DA8XX_CHIPINT1]		= 7,
 	[IRQ_DA8XX_CHIPINT2]		= 7,
@@ -722,8 +701,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA8XX_EHRPWM1]		= 7,
 	[IRQ_DA8XX_EHRPWM1TZ]		= 7,
 	[IRQ_DA850_SATAINT]		= 7,
-	[IRQ_DA850_TINT12_2]		= 7,
-	[IRQ_DA850_TINT34_2]		= 7,
 	[IRQ_DA850_TINTALL_2]		= 7,
 	[IRQ_DA8XX_ECAP0]		= 7,
 	[IRQ_DA8XX_ECAP1]		= 7,
@@ -751,8 +728,6 @@ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = {
 	[IRQ_DA850_CCINT1]		= 7,
 	[IRQ_DA850_CCERRINT1]		= 7,
 	[IRQ_DA850_TCERRINT2]		= 7,
-	[IRQ_DA850_TINT12_3]		= 7,
-	[IRQ_DA850_TINT34_3]		= 7,
 	[IRQ_DA850_TINTALL_3]		= 7,
 	[IRQ_DA850_MCBSP0RINT]		= 7,
 	[IRQ_DA850_MCBSP0XINT]		= 7,
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 8cda729be27..52bc7b1c6ca 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -111,19 +111,21 @@ static const s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_info[] = {
-	{
-		.n_channel		= 32,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= da8xx_queue_tc_mapping,
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	},
+static struct edma_soc_info da830_edma_cc0_info = {
+	.n_channel		= 32,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= da8xx_queue_tc_mapping,
+	.queue_priority_mapping	= da8xx_queue_priority_mapping,
+};
+
+static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
+	&da830_edma_cc0_info,
 };
 
-static struct edma_soc_info da850_edma_info[] = {
+static struct edma_soc_info da850_edma_cc_info[] = {
 	{
 		.n_channel		= 32,
 		.n_region		= 4,
@@ -144,6 +146,11 @@ static struct edma_soc_info da850_edma_info[] = {
 	},
 };
 
+static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
+	&da850_edma_cc_info[0],
+	&da850_edma_cc_info[1],
+};
+
 static struct resource da830_edma_resources[] = {
 	{
 		.name	= "edma_cc0",
@@ -248,18 +255,21 @@ static struct platform_device da850_edma_device = {
 	.resource	= da850_edma_resources,
 };
 
-int __init da8xx_register_edma(void)
+int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	struct platform_device *pdev;
+	da830_edma_cc0_info.rsv = rsv;
 
-	if (cpu_is_davinci_da830())
-		pdev = &da830_edma_device;
-	else if (cpu_is_davinci_da850())
-		pdev = &da850_edma_device;
-	else
-		return -ENODEV;
+	return platform_device_register(&da830_edma_device);
+}
 
-	return platform_device_register(pdev);
+int __init da850_register_edma(struct edma_rsv_info *rsv[2])
+{
+	if (rsv) {
+		da850_edma_cc_info[0].rsv = rsv[0];
+		da850_edma_cc_info[1].rsv = rsv[1];
+	}
+
+	return platform_device_register(&da850_edma_device);
 }
 
 static struct resource da8xx_i2c_resources0[] = {
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
new file mode 100644
index 00000000000..2718a3a90df
--- /dev/null
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -0,0 +1,320 @@
+/*
+ * Texas Instruments TNETV107X SoC devices
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/tnetv107x.h>
+
+#include "clock.h"
+
+/* Base addresses for on-chip devices */
+#define TNETV107X_TPCC_BASE			0x01c00000
+#define TNETV107X_TPTC0_BASE			0x01c10000
+#define TNETV107X_TPTC1_BASE			0x01c10400
+#define TNETV107X_WDOG_BASE			0x08086700
+#define TNETV107X_SDIO0_BASE			0x08088700
+#define TNETV107X_SDIO1_BASE			0x08088800
+#define TNETV107X_ASYNC_EMIF_CNTRL_BASE		0x08200000
+#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE	0x30000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE	0x40000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE	0x44000000
+#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE	0x48000000
+
+/* TNETV107X specific EDMA3 information */
+#define EDMA_TNETV107X_NUM_DMACH	64
+#define EDMA_TNETV107X_NUM_TCC		64
+#define EDMA_TNETV107X_NUM_PARAMENTRY	128
+#define EDMA_TNETV107X_NUM_EVQUE	2
+#define EDMA_TNETV107X_NUM_TC		2
+#define EDMA_TNETV107X_CHMAP_EXIST	0
+#define EDMA_TNETV107X_NUM_REGIONS	4
+#define TNETV107X_DMACH2EVENT_MAP0	0x3C0CE000u
+#define TNETV107X_DMACH2EVENT_MAP1	0x000FFFFFu
+
+#define TNETV107X_DMACH_SDIO0_RX		26
+#define TNETV107X_DMACH_SDIO0_TX		27
+#define TNETV107X_DMACH_SDIO1_RX		28
+#define TNETV107X_DMACH_SDIO1_TX		29
+
+static const s8 edma_tc_mapping[][2] = {
+	/* event queue no	TC no	*/
+	{	 0,		 0	},
+	{	 1,		 1	},
+	{	-1,		-1	}
+};
+
+static const s8 edma_priority_mapping[][2] = {
+	/* event queue no	Prio	*/
+	{	 0,		 3	},
+	{	 1,		 7	},
+	{	-1,		-1	}
+};
+
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= EDMA_TNETV107X_NUM_DMACH,
+	.n_region		= EDMA_TNETV107X_NUM_REGIONS,
+	.n_slot			= EDMA_TNETV107X_NUM_PARAMENTRY,
+	.n_tc			= EDMA_TNETV107X_NUM_TC,
+	.n_cc			= 1,
+	.queue_tc_mapping	= edma_tc_mapping,
+	.queue_priority_mapping	= edma_priority_mapping,
+};
+
+static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
+};
+
+static struct resource edma_resources[] = {
+	{
+		.name	= "edma_cc0",
+		.start	= TNETV107X_TPCC_BASE,
+		.end	= TNETV107X_TPCC_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc0",
+		.start	= TNETV107X_TPTC0_BASE,
+		.end	= TNETV107X_TPTC0_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma_tc1",
+		.start	= TNETV107X_TPTC1_BASE,
+		.end	= TNETV107X_TPTC1_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "edma0",
+		.start	= IRQ_TNETV107X_TPCC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "edma0_err",
+		.start	= IRQ_TNETV107X_TPCC_ERR,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device edma_device = {
+	.name		= "edma",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(edma_resources),
+	.resource	= edma_resources,
+	.dev.platform_data = tnetv107x_edma_info,
+};
+
+static struct plat_serial8250_port serial_data[] = {
+	{
+		.mapbase	= TNETV107X_UART0_BASE,
+		.irq		= IRQ_TNETV107X_UART0,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= TNETV107X_UART1_BASE,
+		.irq		= IRQ_TNETV107X_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.mapbase	= TNETV107X_UART2_BASE,
+		.irq		= IRQ_TNETV107X_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+					UPF_FIXED_TYPE | UPF_IOREMAP,
+		.type		= PORT_AR7,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+	},
+	{
+		.flags	= 0,
+	},
+};
+
+struct platform_device tnetv107x_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= serial_data,
+};
+
+static struct resource mmc0_resources[] = {
+	{ /* Memory mapped registers */
+		.start	= TNETV107X_SDIO0_BASE,
+		.end	= TNETV107X_SDIO0_BASE + 0x0ff,
+		.flags	= IORESOURCE_MEM
+	},
+	{ /* MMC interrupt */
+		.start	= IRQ_TNETV107X_MMC0,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* SDIO interrupt */
+		.start	= IRQ_TNETV107X_SDIO0,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
+		.flags	= IORESOURCE_DMA
+	},
+	{ /* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
+		.flags	= IORESOURCE_DMA
+	},
+};
+
+static struct resource mmc1_resources[] = {
+	{ /* Memory mapped registers */
+		.start	= TNETV107X_SDIO1_BASE,
+		.end	= TNETV107X_SDIO1_BASE + 0x0ff,
+		.flags	= IORESOURCE_MEM
+	},
+	{ /* MMC interrupt */
+		.start	= IRQ_TNETV107X_MMC1,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* SDIO interrupt */
+		.start	= IRQ_TNETV107X_SDIO1,
+		.flags	= IORESOURCE_IRQ
+	},
+	{ /* DMA RX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX),
+		.flags	= IORESOURCE_DMA
+	},
+	{ /* DMA TX */
+		.start	= EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX),
+		.flags	= IORESOURCE_DMA
+	},
+};
+
+static u64 mmc0_dma_mask = DMA_BIT_MASK(32);
+static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device mmc_devices[2] = {
+	{
+		.name		= "davinci_mmc",
+		.id		= 0,
+		.dev		= {
+			.dma_mask		= &mmc0_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+		},
+		.num_resources	= ARRAY_SIZE(mmc0_resources),
+		.resource	= mmc0_resources
+	},
+	{
+		.name		= "davinci_mmc",
+		.id		= 1,
+		.dev		= {
+			.dma_mask		= &mmc1_dma_mask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+		},
+		.num_resources	= ARRAY_SIZE(mmc1_resources),
+		.resource	= mmc1_resources
+	},
+};
+
+static const u32 emif_windows[] = {
+	TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE,
+	TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE,
+};
+
+static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M };
+
+static struct resource wdt_resources[] = {
+	{
+		.start	= TNETV107X_WDOG_BASE,
+		.end	= TNETV107X_WDOG_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device tnetv107x_wdt_device = {
+	.name		= "tnetv107x_wdt",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static int __init nand_init(int chipsel, struct davinci_nand_pdata *data)
+{
+	struct resource res[2];
+	struct platform_device *pdev;
+	u32	range;
+	int	ret;
+
+	/* Figure out the resource range from the ale/cle masks */
+	range = max(data->mask_cle, data->mask_ale);
+	range = PAGE_ALIGN(range + 4) - 1;
+
+	if (range >= emif_window_sizes[chipsel])
+		return -EINVAL;
+
+	pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+	if (!pdev)
+		return -ENOMEM;
+
+	pdev->name		= "davinci_nand";
+	pdev->id		= chipsel;
+	pdev->dev.platform_data	= data;
+
+	memset(res, 0, sizeof(res));
+
+	res[0].start	= emif_windows[chipsel];
+	res[0].end	= res[0].start + range;
+	res[0].flags	= IORESOURCE_MEM;
+
+	res[1].start	= TNETV107X_ASYNC_EMIF_CNTRL_BASE;
+	res[1].end	= res[1].start + SZ_4K - 1;
+	res[1].flags	= IORESOURCE_MEM;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret < 0) {
+		kfree(pdev);
+		return ret;
+	}
+
+	return platform_device_register(pdev);
+}
+
+void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
+{
+	int i;
+
+	platform_device_register(&edma_device);
+	platform_device_register(&tnetv107x_wdt_device);
+
+	if (info->serial_config)
+		davinci_serial_init(info->serial_config);
+
+	for (i = 0; i < 2; i++)
+		if (info->mmc_config[i]) {
+			mmc_devices[i].dev.platform_data = info->mmc_config[i];
+			platform_device_register(&mmc_devices[i]);
+		}
+
+	for (i = 0; i < 4; i++)
+		if (info->nand_config[i])
+			nand_init(i, info->nand_config[i]);
+}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 383478116ef..3d996b659ff 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -591,16 +591,18 @@ queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm355_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= queue_tc_mapping,
-		.queue_priority_mapping	= queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= queue_tc_mapping,
+	.queue_priority_mapping	= queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
+       &edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a146849d78f..6b6f4c64370 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -822,17 +822,19 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm365_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 256,
-		.n_tc			= 4,
-		.n_cc			= 1,
-		.queue_tc_mapping	= dm365_queue_tc_mapping,
-		.queue_priority_mapping	= dm365_queue_priority_mapping,
-		.default_queue		= EVENTQ_3,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 256,
+	.n_tc			= 4,
+	.n_cc			= 1,
+	.queue_tc_mapping	= dm365_queue_tc_mapping,
+	.queue_priority_mapping	= dm365_queue_priority_mapping,
+	.default_queue		= EVENTQ_3,
+};
+
+static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -1020,6 +1022,8 @@ static struct davinci_timer_info dm365_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
+#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
+
 static struct plat_serial8250_port dm365_serial_platform_data[] = {
 	{
 		.mapbase	= DAVINCI_UART0_BASE,
@@ -1030,7 +1034,7 @@ static struct plat_serial8250_port dm365_serial_platform_data[] = {
 		.regshift	= 2,
 	},
 	{
-		.mapbase	= DAVINCI_UART1_BASE,
+		.mapbase	= DM365_UART1_BASE,
 		.irq		= IRQ_UARTINT1,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
 				  UPF_IOREMAP,
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 7ad15208b84..40fec315c99 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -492,16 +492,18 @@ queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm644x_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 4,
-		.n_slot			= 128,
-		.n_tc			= 2,
-		.n_cc			= 1,
-		.queue_tc_mapping	= queue_tc_mapping,
-		.queue_priority_mapping	= queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 4,
+	.n_slot			= 128,
+	.n_tc			= 2,
+	.n_cc			= 1,
+	.queue_tc_mapping	= queue_tc_mapping,
+	.queue_priority_mapping	= queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 94045656cff..e4a3df1872a 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -529,16 +529,18 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info dm646x_edma_info[] = {
-	{
-		.n_channel		= 64,
-		.n_region		= 6,	/* 0-1, 4-7 */
-		.n_slot			= 512,
-		.n_tc			= 4,
-		.n_cc			= 1,
-		.queue_tc_mapping	= dm646x_queue_tc_mapping,
-		.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	},
+static struct edma_soc_info edma_cc0_info = {
+	.n_channel		= 64,
+	.n_region		= 6,	/* 0-1, 4-7 */
+	.n_slot			= 512,
+	.n_tc			= 4,
+	.n_cc			= 1,
+	.queue_tc_mapping	= dm646x_queue_tc_mapping,
+	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+};
+
+static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
+	&edma_cc0_info,
 };
 
 static struct resource edma_resources[] = {
@@ -877,6 +879,13 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 	platform_device_register(&vpif_capture_dev);
 }
 
+int __init dm646x_init_edma(struct edma_rsv_info *rsv)
+{
+	edma_cc0_info.rsv = rsv;
+
+	return platform_device_register(&dm646x_edma_device);
+}
+
 void __init dm646x_init(void)
 {
 	dm646x_board_setup_refclk(&ref_clk);
@@ -888,7 +897,6 @@ static int __init dm646x_init_devices(void)
 	if (!cpu_is_davinci_dm646x())
 		return 0;
 
-	platform_device_register(&dm646x_edma_device);
 	platform_device_register(&dm646x_emac_device);
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index d33827aadda..2ede598b77d 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -99,8 +99,6 @@
 
 #define EDMA_MAX_DMACH           64
 #define EDMA_MAX_PARAMENTRY     512
-#define EDMA_MAX_CC               2
-
 
 /*****************************************************************************/
 
@@ -207,6 +205,18 @@ static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
 	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
 }
 
+static inline void set_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		set_bit(offset + (len - 1), p);
+}
+
+static inline void clear_bits(int offset, int len, unsigned long *p)
+{
+	for (; len > 0; len--)
+		clear_bit(offset + (len - 1), p);
+}
+
 /*****************************************************************************/
 
 /* actual number of DMA channels and slots on this silicon */
@@ -1376,11 +1386,13 @@ EXPORT_SYMBOL(edma_clear_event);
 
 static int __init edma_probe(struct platform_device *pdev)
 {
-	struct edma_soc_info	*info = pdev->dev.platform_data;
+	struct edma_soc_info	**info = pdev->dev.platform_data;
 	const s8		(*queue_priority_mapping)[2];
 	const s8		(*queue_tc_mapping)[2];
-	int			i, j, found = 0;
+	int			i, j, off, ln, found = 0;
 	int			status = -1;
+	const s16		(*rsv_chans)[2];
+	const s16		(*rsv_slots)[2];
 	int			irq[EDMA_MAX_CC] = {0, 0};
 	int			err_irq[EDMA_MAX_CC] = {0, 0};
 	struct resource		*r[EDMA_MAX_CC] = {NULL};
@@ -1395,7 +1407,7 @@ static int __init edma_probe(struct platform_device *pdev)
 		sprintf(res_name, "edma_cc%d", j);
 		r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						res_name);
-		if (!r[j]) {
+		if (!r[j] || !info[j]) {
 			if (found)
 				break;
 			else
@@ -1426,13 +1438,14 @@ static int __init edma_probe(struct platform_device *pdev)
 		}
 		memset(edma_cc[j], 0, sizeof(struct edma));
 
-		edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel,
+		edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
 							EDMA_MAX_DMACH);
-		edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot,
+		edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot,
 							EDMA_MAX_PARAMENTRY);
-		edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC);
+		edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc,
+							EDMA_MAX_CC);
 
-		edma_cc[j]->default_queue = info[j].default_queue;
+		edma_cc[j]->default_queue = info[j]->default_queue;
 		if (!edma_cc[j]->default_queue)
 			edma_cc[j]->default_queue = EVENTQ_1;
 
@@ -1447,6 +1460,31 @@ static int __init edma_probe(struct platform_device *pdev)
 		memset(edma_cc[j]->edma_unused, 0xff,
 			sizeof(edma_cc[j]->edma_unused));
 
+		if (info[j]->rsv) {
+
+			/* Clear the reserved channels in unused list */
+			rsv_chans = info[j]->rsv->rsv_chans;
+			if (rsv_chans) {
+				for (i = 0; rsv_chans[i][0] != -1; i++) {
+					off = rsv_chans[i][0];
+					ln = rsv_chans[i][1];
+					clear_bits(off, ln,
+						edma_cc[j]->edma_unused);
+				}
+			}
+
+			/* Set the reserved slots in inuse list */
+			rsv_slots = info[j]->rsv->rsv_slots;
+			if (rsv_slots) {
+				for (i = 0; rsv_slots[i][0] != -1; i++) {
+					off = rsv_slots[i][0];
+					ln = rsv_slots[i][1];
+					set_bits(off, ln,
+						edma_cc[j]->edma_inuse);
+				}
+			}
+		}
+
 		sprintf(irq_name, "edma%d", j);
 		irq[j] = platform_get_irq_byname(pdev, irq_name);
 		edma_cc[j]->irq_res_start = irq[j];
@@ -1476,8 +1514,8 @@ static int __init edma_probe(struct platform_device *pdev)
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, EVENTQ_1);
 
-		queue_tc_mapping = info[j].queue_tc_mapping;
-		queue_priority_mapping = info[j].queue_priority_mapping;
+		queue_tc_mapping = info[j]->queue_tc_mapping;
+		queue_priority_mapping = info[j]->queue_priority_mapping;
 
 		/* Event queue to TC mapping */
 		for (i = 0; queue_tc_mapping[i][0] != -1; i++)
@@ -1496,7 +1534,7 @@ static int __init edma_probe(struct platform_device *pdev)
 		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
 			map_dmach_param(j);
 
-		for (i = 0; i < info[j].n_region; i++) {
+		for (i = 0; i < info[j]->n_region; i++) {
 			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
 			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
 			edma_write_array(j, EDMA_QRAE, i, 0x0);
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/arch/arm/mach-davinci/gpio-tnetv107x.c
new file mode 100644
index 00000000000..d10298620e2
--- /dev/null
+++ b/arch/arm/mach-davinci/gpio-tnetv107x.c
@@ -0,0 +1,205 @@
+/*
+ * Texas Instruments TNETV107X GPIO Controller
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/tnetv107x.h>
+
+struct tnetv107x_gpio_regs {
+	u32	idver;
+	u32	data_in[3];
+	u32	data_out[3];
+	u32	direction[3];
+	u32	enable[3];
+};
+
+#define gpio_reg_index(gpio)	((gpio) >> 5)
+#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
+
+#define gpio_reg_rmw(reg, mask, val)	\
+	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
+
+#define gpio_reg_set_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
+
+#define gpio_reg_clear_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
+
+#define gpio_reg_get_bit(reg, gpio)	\
+	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
+
+#define chip2controller(chip)		\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
+
+static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
+
+static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(&regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_clear_bit(&regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(&regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(&regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(&regs->data_out, gpio);
+
+	gpio_reg_clear_bit(&regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	int ret;
+
+	ret = gpio_reg_get_bit(&regs->data_in, gpio);
+
+	return ret ? 1 : 0;
+}
+
+static void tnetv107x_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(&regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(&regs->data_out, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int __init tnetv107x_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct tnetv107x_gpio_regs *regs;
+	struct davinci_gpio_controller *ctlr;
+
+	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
+		return 0;
+
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
+		ngpio = TNETV107X_N_GPIO;
+
+	regs = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!regs))
+		return -EINVAL;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		ctlr = &chips[i];
+
+		ctlr->chip.label	= "tnetv107x";
+		ctlr->chip.can_sleep	= 0;
+		ctlr->chip.base		= base;
+		ctlr->chip.ngpio	= ngpio - base;
+		if (ctlr->chip.ngpio > 32)
+			ctlr->chip.ngpio = 32;
+
+		ctlr->chip.request		= tnetv107x_gpio_request;
+		ctlr->chip.free			= tnetv107x_gpio_free;
+		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
+		ctlr->chip.get			= tnetv107x_gpio_get;
+		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
+		ctlr->chip.set			= tnetv107x_gpio_set;
+
+		spin_lock_init(&ctlr->lock);
+
+		ctlr->regs	= regs;
+		ctlr->set_data	= &regs->data_out[i];
+		ctlr->clr_data	= &regs->data_out[i];
+		ctlr->in_data	= &regs->data_in[i];
+
+		gpiochip_add(&ctlr->chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+	return 0;
+}
+pure_initcall(tnetv107x_gpio_setup);
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 834725f1e81..9aa240909a2 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -52,7 +52,8 @@
 struct snd_platform_data {
 	u32 tx_dma_offset;
 	u32 rx_dma_offset;
-	enum dma_event_q eventq_no;	/* event queue number */
+	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
+	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
 	unsigned int codec_fmt;
 	/*
 	 * Allowing this is more efficient and eliminates left and right swaps
@@ -63,6 +64,49 @@ struct snd_platform_data {
 	unsigned sram_size_playback;
 	unsigned sram_size_capture;
 
+	/*
+	 * If McBSP peripheral gets the clock from an external pin,
+	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
+	 * and MCBSP_CLKS.
+	 * Depending on different hardware connections it is possible
+	 * to use this setting to change the behaviour of McBSP
+	 * driver. The dm365_clk_input_pin enum is available for dm365
+	 */
+	int clk_input_pin;
+
+	/*
+	 * This flag works when both clock and FS are outputs for the cpu
+	 * and makes clock more accurate (FS is not symmetrical and the
+	 * clock is very fast.
+	 * The clock becoming faster is named
+	 * i2s continuous serial clock (I2S_SCK) and it is an externally
+	 * visible bit clock.
+	 *
+	 * first line : WordSelect
+	 * second line : ContinuousSerialClock
+	 * third line: SerialData
+	 *
+	 * SYMMETRICAL APPROACH:
+	 *   _______________________          LEFT
+	 * _|         RIGHT         |______________________|
+	 *     _   _         _   _   _   _         _   _
+	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
+	 *     _   _         _   _   _   _         _   _
+	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
+	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
+	 *
+	 * ACCURATE CLOCK APPROACH:
+	 *   ______________          LEFT
+	 * _|     RIGHT    |_______________________________|
+	 *     _         _   _         _   _   _   _   _   _
+	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
+	 *     _         _   _          _      dummy cycles
+	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
+	 *    \_/       \_/ \_/        \_/
+	 *
+	 */
+	bool i2s_accurate_sck;
+
 	/* McASP specific fields */
 	int tdm_slots;
 	u8 op_mode;
@@ -78,6 +122,11 @@ enum {
 	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 };
 
+enum dm365_clk_input_pin {
+	MCBSP_CLKR = 0,		/* DM365 */
+	MCBSP_CLKS,
+};
+
 #define INACTIVE_MODE	0
 #define TX_MODE		1
 #define RX_MODE		2
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 1b31a9aa8fb..3c07059f526 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -67,7 +67,8 @@ extern void __iomem *da8xx_syscfg1_base;
 void __init da830_init(void);
 void __init da850_init(void);
 
-int da8xx_register_edma(void);
+int da830_register_edma(struct edma_rsv_info *rsv);
+int da850_register_edma(struct edma_rsv_info *rsv[2]);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
 int da8xx_register_usb20(unsigned mA, unsigned potpgt);
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 3cd93a801d9..f761dfdb868 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -17,22 +17,50 @@
  */
 
 #include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+
+#include <mach/serial.h>
+
 #define UART_SHIFT	2
 
+		.pushsection .data
+davinci_uart_phys:	.word	0
+davinci_uart_virt:	.word	0
+		.popsection
+
 		.macro addruart, rx, tmp
+
+		/* Use davinci_uart_phys/virt if already configured */
+10:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\rx, =davinci_uart_virt
+		ldr	\rx, [\rx]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x01000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_MACH_DAVINCI_DA830_EVM) || \
-	defined(CONFIG_MACH_DAVINCI_DA850_EVM)
-		orr	\rx, \rx, #0x00d00000	@ physical base address
-		orr	\rx, \rx, #0x0000d000	@ of UART 2
-#else
-		orr	\rx, \rx, #0x00c20000   @ UART 0
-#endif
+
+		/* Copy uart phys address from decompressor uart info */
+		ldreq	\tmp, =__virt_to_phys(davinci_uart_phys)
+		ldrne	\tmp, =davinci_uart_phys
+		ldreq	\rx, =DAVINCI_UART_INFO
+		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rx, [\rx, #0]
+		str	\rx, [\tmp]
+
+		/* Copy uart virt address from decompressor uart info */
+		ldreq	\tmp, =__virt_to_phys(davinci_uart_virt)
+		ldrne	\tmp, =davinci_uart_virt
+		ldreq	\rx, =DAVINCI_UART_INFO
+		ldrne	\rx, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldr	\rx, [\rx, #4]
+		str	\rx, [\tmp]
+
+		b	10b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index add6f794a36..0a27ee9a70e 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -32,6 +32,7 @@ void __init dm646x_init(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 void __init dm646x_board_setup_refclk(struct clk *clk);
+int __init dm646x_init_edma(struct edma_rsv_info *rsv);
 
 void dm646x_video_init(void);
 
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
index ced3092af5b..dc10ef6cf57 100644
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -230,6 +230,8 @@ enum sync_dimension {
 #define EDMA_CONT_PARAMS_FIXED_EXACT	 1002
 #define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
 
+#define EDMA_MAX_CC               2
+
 /* alloc/free DMA channels and their dedicated parameter RAM slots */
 int edma_alloc_channel(int channel,
 	void (*callback)(unsigned channel, u16 ch_status, void *data),
@@ -269,6 +271,12 @@ void edma_clear_event(unsigned channel);
 void edma_pause(unsigned channel);
 void edma_resume(unsigned channel);
 
+struct edma_rsv_info {
+
+	const s16	(*rsv_chans)[2];
+	const s16	(*rsv_slots)[2];
+};
+
 /* platform_data for EDMA driver */
 struct edma_soc_info {
 
@@ -280,6 +288,9 @@ struct edma_soc_info {
 	unsigned	n_cc;
 	enum dma_event_q	default_queue;
 
+	/* Resource reservation for other cores */
+	struct edma_rsv_info	*rsv;
+
 	const s8	(*queue_tc_mapping)[2];
 	const s8	(*queue_priority_mapping)[2];
 };
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index 504cc180a60..fbece126c2b 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -25,6 +25,7 @@
 
 enum davinci_gpio_type {
 	GPIO_TYPE_DAVINCI = 0,
+	GPIO_TYPE_TNETV107X,
 };
 
 /*
@@ -87,9 +88,13 @@ static inline u32 __gpio_mask(unsigned gpio)
 	return 1 << (gpio % 32);
 }
 
-/* The get/set/clear functions will inline when called with constant
+/*
+ * The get/set/clear functions will inline when called with constant
  * parameters referencing built-in GPIOs, for low-overhead bitbanging.
  *
+ * gpio_set_value() will inline only on traditional Davinci style controllers
+ * with distinct set/clear registers.
+ *
  * Otherwise, calls with variable parameters or referencing external
  * GPIOs (e.g. on GPIO expander chips) use outlined functions.
  */
@@ -100,12 +105,15 @@ static inline void gpio_set_value(unsigned gpio, int value)
 		u32				mask;
 
 		ctlr = __gpio_to_controller(gpio);
-		mask = __gpio_mask(gpio);
-		if (value)
-			__raw_writel(mask, ctlr->set_data);
-		else
-			__raw_writel(mask, ctlr->clr_data);
-		return;
+
+		if (ctlr->set_data != ctlr->clr_data) {
+			mask = __gpio_mask(gpio);
+			if (value)
+				__raw_writel(mask, ctlr->set_data);
+			else
+				__raw_writel(mask, ctlr->clr_data);
+			return;
+		}
 	}
 
 	__gpio_set_value(gpio, value);
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index f6c4f34909a..8051110b8ac 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -11,8 +11,19 @@
 #ifndef __ASM_ARCH_SERIAL_H
 #define __ASM_ARCH_SERIAL_H
 
+#include <asm/memory.h>
+
 #include <mach/hardware.h>
 
+/*
+ * Stolen area that contains debug uart physical and virtual addresses.  These
+ * addresses are filled in by the uncompress.h code, and are used by the debug
+ * macros in debug-macro.S.
+ *
+ * This area sits just below the page tables (see arch/arm/kernel/head.S).
+ */
+#define DAVINCI_UART_INFO	(PHYS_OFFSET + 0x3ff8)
+
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
@@ -21,16 +32,26 @@
 #define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
 #define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
 
+#define TNETV107X_UART0_BASE	0x08108100
+#define TNETV107X_UART1_BASE	0x08088400
+#define TNETV107X_UART2_BASE	0x08108300
+
+#define TNETV107X_UART0_VIRT	IOMEM(0xfee08100)
+#define TNETV107X_UART1_VIRT	IOMEM(0xfed88400)
+#define TNETV107X_UART2_VIRT	IOMEM(0xfee08300)
+
 /* DaVinci UART register offsets */
 #define UART_DAVINCI_PWREMU		0x0c
 #define UART_DM646X_SCR			0x10
 #define UART_DM646X_SCR_TX_WATERMARK	0x08
 
+#ifndef __ASSEMBLY__
 struct davinci_uart_config {
 	/* Bit field of UARTs present; bit 0 --> UART1 */
 	unsigned int enabled_uarts;
 };
 
 extern int davinci_serial_init(struct davinci_uart_config *);
+#endif
 
 #endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h
new file mode 100644
index 00000000000..c7206473312
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h
@@ -0,0 +1,55 @@
+/*
+ * Texas Instruments TNETV107X SoC Specific Defines
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_DAVINCI_TNETV107X_H
+#define __ASM_ARCH_DAVINCI_TNETV107X_H
+
+#include <asm/sizes.h>
+
+#define TNETV107X_DDR_BASE	0x80000000
+
+/*
+ * Fixed mapping for early init starts here. If low-level debug is enabled,
+ * this area also gets mapped via io_pg_offset and io_phys by the boot code.
+ * To fit in with the io_pg_offset calculation, the io base address selected
+ * here _must_ be a multiple of 2^20.
+ */
+#define TNETV107X_IO_BASE	0x08000000
+#define TNETV107X_IO_VIRT	(IO_VIRT + SZ_1M)
+
+#define TNETV107X_N_GPIO	65
+
+#ifndef __ASSEMBLY__
+
+#include <linux/serial_8250.h>
+#include <mach/mmc.h>
+#include <mach/nand.h>
+#include <mach/serial.h>
+
+struct tnetv107x_device_info {
+	struct davinci_uart_config	*serial_config;
+	struct davinci_mmc_config	*mmc_config[2];  /* 2 controllers */
+	struct davinci_nand_pdata	*nand_config[4]; /* 4 chipsels */
+};
+
+extern struct platform_device tnetv107x_wdt_device;
+extern struct platform_device tnetv107x_serial_device;
+
+extern void __init tnetv107x_init(void);
+extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
+extern void __init tnetv107x_irq_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_DAVINCI_TNETV107X_H */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 33796b4db17..15a6192ad6e 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -1,8 +1,17 @@
 /*
  * Serial port stubs for kernel decompress status messages
  *
- *  Author:     Anant Gole
- * (C) Copyright (C) 2006, Texas Instruments, Inc
+ * Initially based on:
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Original copyrights follow.
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -11,30 +20,17 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <mach/serial.h>
 
 #include <asm/mach-types.h>
 
-extern unsigned int __machine_arch_type;
+#include <mach/serial.h>
 
 static u32 *uart;
-
-static u32 *get_uart_base(void)
-{
-	if (__machine_arch_type == MACH_TYPE_DAVINCI_DA830_EVM ||
-		__machine_arch_type == MACH_TYPE_DAVINCI_DA850_EVM)
-		return (u32 *)DA8XX_UART2_BASE;
-	else
-		return (u32 *)DAVINCI_UART0_BASE;
-}
+static u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
 
 /* PORT_16C550A, in polled non-fifo mode */
-
 static void putc(char c)
 {
-	if (!uart)
-		uart = get_uart_base();
-
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 	uart[UART_TX] = c;
@@ -42,12 +38,61 @@ static void putc(char c)
 
 static inline void flush(void)
 {
-	if (!uart)
-		uart = get_uart_base();
-
 	while (!(uart[UART_LSR] & UART_LSR_THRE))
 		barrier();
 }
 
-#define arch_decomp_setup()
+static inline void set_uart_info(u32 phys, void * __iomem virt)
+{
+	uart = (u32 *)phys;
+	uart_info[0] = phys;
+	uart_info[1] = (u32)virt;
+}
+
+#define _DEBUG_LL_ENTRY(machine, phys, virt)			\
+	if (machine_is_##machine()) {				\
+		set_uart_info(phys, virt);			\
+		break;						\
+	}
+
+#define DEBUG_LL_DAVINCI(machine, port)				\
+	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE,	\
+			IO_ADDRESS(DAVINCI_UART##port##_BASE))
+
+#define DEBUG_LL_DA8XX(machine, port)				\
+	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE,	\
+			IO_ADDRESS(DA8XX_UART##port##_BASE))
+
+#define DEBUG_LL_TNETV107X(machine, port)			\
+	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE,	\
+			TNETV107X_UART##port##_VIRT)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* Davinci boards */
+		DEBUG_LL_DAVINCI(davinci_evm,		0);
+		DEBUG_LL_DAVINCI(sffsdr,		0);
+		DEBUG_LL_DAVINCI(neuros_osd2,		0);
+		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
+		DEBUG_LL_DAVINCI(dm355_leopard,		0);
+		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
+		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
+
+		/* DA8xx boards */
+		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
+		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
+
+		/* TNETV107x boards */
+		DEBUG_LL_TNETV107X(tnetv107x,		1);
+	} while (0);
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
new file mode 100644
index 00000000000..864e60482c5
--- /dev/null
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -0,0 +1,753 @@
+/*
+ * Texas Instruments TNETV107X SoC Support
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/time.h>
+#include <mach/cputype.h>
+#include <mach/psc.h>
+#include <mach/cp_intc.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/hardware.h>
+#include <mach/tnetv107x.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/* Base addresses for on-chip devices */
+#define TNETV107X_INTC_BASE			0x03000000
+#define TNETV107X_TIMER0_BASE			0x08086500
+#define TNETV107X_TIMER1_BASE			0x08086600
+#define TNETV107X_CHIP_CFG_BASE			0x08087000
+#define TNETV107X_GPIO_BASE			0x08088000
+#define TNETV107X_CLOCK_CONTROL_BASE		0x0808a000
+#define TNETV107X_PSC_BASE			0x0808b000
+
+/* Reference clock frequencies */
+#define OSC_FREQ_ONCHIP		(24000 * 1000)
+#define OSC_FREQ_OFFCHIP_SYS	(25000 * 1000)
+#define OSC_FREQ_OFFCHIP_ETH	(25000 * 1000)
+#define OSC_FREQ_OFFCHIP_TDM	(19200 * 1000)
+
+#define N_PLLS	3
+
+/* Clock Control Registers */
+struct clk_ctrl_regs {
+	u32	pll_bypass;
+	u32	_reserved0;
+	u32	gem_lrst;
+	u32	_reserved1;
+	u32	pll_unlock_stat;
+	u32	sys_unlock;
+	u32	eth_unlock;
+	u32	tdm_unlock;
+};
+
+/* SSPLL Registers */
+struct sspll_regs {
+	u32	modes;
+	u32	post_div;
+	u32	pre_div;
+	u32	mult_factor;
+	u32	divider_range;
+	u32	bw_divider;
+	u32	spr_amount;
+	u32	spr_rate_div;
+	u32	diag;
+};
+
+/* Watchdog Timer Registers */
+struct wdt_regs {
+	u32	kick_lock;
+	u32	kick;
+	u32	change_lock;
+	u32	change ;
+	u32	disable_lock;
+	u32	disable;
+	u32	prescale_lock;
+	u32	prescale;
+};
+
+static struct clk_ctrl_regs __iomem *clk_ctrl_regs;
+
+static struct sspll_regs __iomem *sspll_regs[N_PLLS];
+static int sspll_regs_base[N_PLLS] = { 0x40, 0x80, 0xc0 };
+
+/* PLL bypass bit shifts in clk_ctrl_regs->pll_bypass register */
+static u32 bypass_mask[N_PLLS] = { BIT(0), BIT(2), BIT(1) };
+
+/* offchip (external) reference clock frequencies */
+static u32 pll_ext_freq[] = {
+	OSC_FREQ_OFFCHIP_SYS,
+	OSC_FREQ_OFFCHIP_TDM,
+	OSC_FREQ_OFFCHIP_ETH
+};
+
+/* PSC control registers */
+static u32 psc_regs[] __initconst = { TNETV107X_PSC_BASE };
+
+/* Host map for interrupt controller */
+static u32 intc_host_map[] = { 0x01010000, 0x01010101, -1 };
+
+static unsigned long clk_sspll_recalc(struct clk *clk);
+
+/* Level 1 - the PLLs */
+#define define_pll_clk(cname, pll, divmask, base)	\
+	static struct pll_data pll_##cname##_data = {	\
+		.num		= pll,			\
+		.div_ratio_mask	= divmask,		\
+		.phys_base	= base +		\
+			TNETV107X_CLOCK_CONTROL_BASE,	\
+	};						\
+	static struct clk pll_##cname##_clk = {		\
+		.name		= "pll_" #cname "_clk",	\
+		.pll_data	= &pll_##cname##_data,	\
+		.flags		= CLK_PLL,		\
+		.recalc		= clk_sspll_recalc,	\
+	}
+
+define_pll_clk(sys, 0, 0x1ff, 0x600);
+define_pll_clk(tdm, 1, 0x0ff, 0x200);
+define_pll_clk(eth, 2, 0x0ff, 0x400);
+
+/* Level 2 - divided outputs from the PLLs */
+#define define_pll_div_clk(pll, cname, div)		\
+	static struct clk pll##_##cname##_clk = {	\
+		.name		= #pll "_" #cname "_clk",\
+		.parent		= &pll_##pll##_clk,	\
+		.flags		= CLK_PLL,		\
+		.div_reg	= PLLDIV##div,		\
+	}
+
+define_pll_div_clk(sys, arm1176,	1);
+define_pll_div_clk(sys, dsp,		2);
+define_pll_div_clk(sys, ddr,		3);
+define_pll_div_clk(sys, full,		4);
+define_pll_div_clk(sys, lcd,		5);
+define_pll_div_clk(sys, vlynq_ref,	6);
+define_pll_div_clk(sys, tsc,		7);
+define_pll_div_clk(sys, half,		8);
+
+define_pll_div_clk(eth, 5mhz,		1);
+define_pll_div_clk(eth, 50mhz,		2);
+define_pll_div_clk(eth, 125mhz,		3);
+define_pll_div_clk(eth, 250mhz,		4);
+define_pll_div_clk(eth, 25mhz,		5);
+
+define_pll_div_clk(tdm, 0,		1);
+define_pll_div_clk(tdm, extra,		2);
+define_pll_div_clk(tdm, 1,		3);
+
+
+/* Level 3 - LPSC gated clocks */
+#define __lpsc_clk(cname, _parent, mod, flg)		\
+	static struct clk clk_##cname = {		\
+		.name		= #cname,		\
+		.parent		= &_parent,		\
+		.lpsc		= TNETV107X_LPSC_##mod,\
+		.flags		= flg,			\
+	}
+
+#define lpsc_clk_enabled(cname, parent, mod)		\
+	__lpsc_clk(cname, parent, mod, ALWAYS_ENABLED)
+
+#define lpsc_clk(cname, parent, mod)			\
+	__lpsc_clk(cname, parent, mod, 0)
+
+lpsc_clk_enabled(arm,		sys_arm1176_clk, ARM);
+lpsc_clk_enabled(gem,		sys_dsp_clk,	GEM);
+lpsc_clk_enabled(ddr2_phy,	sys_ddr_clk,	DDR2_PHY);
+lpsc_clk_enabled(tpcc,		sys_full_clk,	TPCC);
+lpsc_clk_enabled(tptc0,		sys_full_clk,	TPTC0);
+lpsc_clk_enabled(tptc1,		sys_full_clk,	TPTC1);
+lpsc_clk_enabled(ram,		sys_full_clk,	RAM);
+lpsc_clk_enabled(aemif,		sys_full_clk,	AEMIF);
+lpsc_clk_enabled(chipcfg,	sys_half_clk,	CHIP_CFG);
+lpsc_clk_enabled(rom,		sys_half_clk,	ROM);
+lpsc_clk_enabled(secctl,	sys_half_clk,	SECCTL);
+lpsc_clk_enabled(keymgr,	sys_half_clk,	KEYMGR);
+lpsc_clk_enabled(gpio,		sys_half_clk,	GPIO);
+lpsc_clk_enabled(debugss,	sys_half_clk,	DEBUGSS);
+lpsc_clk_enabled(system,	sys_half_clk,	SYSTEM);
+lpsc_clk_enabled(ddr2_vrst,	sys_ddr_clk,	DDR2_EMIF1_VRST);
+lpsc_clk_enabled(ddr2_vctl_rst,	sys_ddr_clk,	DDR2_EMIF2_VCTL_RST);
+lpsc_clk_enabled(wdt_arm,	sys_half_clk,	WDT_ARM);
+
+lpsc_clk(mbx_lite,	sys_arm1176_clk,	MBX_LITE);
+lpsc_clk(ethss,		eth_125mhz_clk,		ETHSS);
+lpsc_clk(tsc,		sys_tsc_clk,		TSC);
+lpsc_clk(uart0,		sys_half_clk,		UART0);
+lpsc_clk(uart1,		sys_half_clk,		UART1);
+lpsc_clk(uart2,		sys_half_clk,		UART2);
+lpsc_clk(pktsec,	sys_half_clk,		PKTSEC);
+lpsc_clk(keypad,	sys_half_clk,		KEYPAD);
+lpsc_clk(mdio,		sys_half_clk,		MDIO);
+lpsc_clk(sdio0,		sys_half_clk,		SDIO0);
+lpsc_clk(sdio1,		sys_half_clk,		SDIO1);
+lpsc_clk(timer0,	sys_half_clk,		TIMER0);
+lpsc_clk(timer1,	sys_half_clk,		TIMER1);
+lpsc_clk(wdt_dsp,	sys_half_clk,		WDT_DSP);
+lpsc_clk(ssp,		sys_half_clk,		SSP);
+lpsc_clk(tdm0,		tdm_0_clk,		TDM0);
+lpsc_clk(tdm1,		tdm_1_clk,		TDM1);
+lpsc_clk(vlynq,		sys_vlynq_ref_clk,	VLYNQ);
+lpsc_clk(mcdma,		sys_half_clk,		MCDMA);
+lpsc_clk(usb0,		sys_half_clk,		USB0);
+lpsc_clk(usb1,		sys_half_clk,		USB1);
+lpsc_clk(usbss,		sys_half_clk,		USBSS);
+lpsc_clk(ethss_rgmii,	eth_250mhz_clk,		ETHSS_RGMII);
+lpsc_clk(imcop,		sys_dsp_clk,		IMCOP);
+lpsc_clk(spare,		sys_half_clk,		SPARE);
+
+/* LCD needs a full power down to clear controller state */
+__lpsc_clk(lcd, sys_lcd_clk, LCD, PSC_SWRSTDISABLE);
+
+
+/* Level 4 - leaf clocks for LPSC modules shared across drivers */
+static struct clk clk_rng = { .name = "rng", .parent = &clk_pktsec };
+static struct clk clk_pka = { .name = "pka", .parent = &clk_pktsec };
+
+static struct clk_lookup clks[] = {
+	CLK(NULL,		"pll_sys_clk",		&pll_sys_clk),
+	CLK(NULL,		"pll_eth_clk",		&pll_eth_clk),
+	CLK(NULL,		"pll_tdm_clk",		&pll_tdm_clk),
+	CLK(NULL,		"sys_arm1176_clk",	&sys_arm1176_clk),
+	CLK(NULL,		"sys_dsp_clk",		&sys_dsp_clk),
+	CLK(NULL,		"sys_ddr_clk",		&sys_ddr_clk),
+	CLK(NULL,		"sys_full_clk",		&sys_full_clk),
+	CLK(NULL,		"sys_lcd_clk",		&sys_lcd_clk),
+	CLK(NULL,		"sys_vlynq_ref_clk",	&sys_vlynq_ref_clk),
+	CLK(NULL,		"sys_tsc_clk",		&sys_tsc_clk),
+	CLK(NULL,		"sys_half_clk",		&sys_half_clk),
+	CLK(NULL,		"eth_5mhz_clk",		&eth_5mhz_clk),
+	CLK(NULL,		"eth_50mhz_clk",	&eth_50mhz_clk),
+	CLK(NULL,		"eth_125mhz_clk",	&eth_125mhz_clk),
+	CLK(NULL,		"eth_250mhz_clk",	&eth_250mhz_clk),
+	CLK(NULL,		"eth_25mhz_clk",	&eth_25mhz_clk),
+	CLK(NULL,		"tdm_0_clk",		&tdm_0_clk),
+	CLK(NULL,		"tdm_extra_clk",	&tdm_extra_clk),
+	CLK(NULL,		"tdm_1_clk",		&tdm_1_clk),
+	CLK(NULL,		"clk_arm",		&clk_arm),
+	CLK(NULL,		"clk_gem",		&clk_gem),
+	CLK(NULL,		"clk_ddr2_phy",		&clk_ddr2_phy),
+	CLK(NULL,		"clk_tpcc",		&clk_tpcc),
+	CLK(NULL,		"clk_tptc0",		&clk_tptc0),
+	CLK(NULL,		"clk_tptc1",		&clk_tptc1),
+	CLK(NULL,		"clk_ram",		&clk_ram),
+	CLK(NULL,		"clk_mbx_lite",		&clk_mbx_lite),
+	CLK("tnetv107x-fb.0",	NULL,			&clk_lcd),
+	CLK(NULL,		"clk_ethss",		&clk_ethss),
+	CLK(NULL,		"aemif",		&clk_aemif),
+	CLK(NULL,		"clk_chipcfg",		&clk_chipcfg),
+	CLK("tnetv107x-ts.0",	NULL,			&clk_tsc),
+	CLK(NULL,		"clk_rom",		&clk_rom),
+	CLK(NULL,		"uart2",		&clk_uart2),
+	CLK(NULL,		"clk_pktsec",		&clk_pktsec),
+	CLK("tnetv107x-rng.0",	NULL,			&clk_rng),
+	CLK("tnetv107x-pka.0",	NULL,			&clk_pka),
+	CLK(NULL,		"clk_secctl",		&clk_secctl),
+	CLK(NULL,		"clk_keymgr",		&clk_keymgr),
+	CLK("tnetv107x-keypad.0", NULL,			&clk_keypad),
+	CLK(NULL,		"clk_gpio",		&clk_gpio),
+	CLK(NULL,		"clk_mdio",		&clk_mdio),
+	CLK("davinci_mmc.0",	NULL,			&clk_sdio0),
+	CLK(NULL,		"uart0",		&clk_uart0),
+	CLK(NULL,		"uart1",		&clk_uart1),
+	CLK(NULL,		"timer0",		&clk_timer0),
+	CLK(NULL,		"timer1",		&clk_timer1),
+	CLK("tnetv107x_wdt.0",	NULL,			&clk_wdt_arm),
+	CLK(NULL,		"clk_wdt_dsp",		&clk_wdt_dsp),
+	CLK("ti-ssp.0",		NULL,			&clk_ssp),
+	CLK(NULL,		"clk_tdm0",		&clk_tdm0),
+	CLK(NULL,		"clk_vlynq",		&clk_vlynq),
+	CLK(NULL,		"clk_mcdma",		&clk_mcdma),
+	CLK(NULL,		"clk_usb0",		&clk_usb0),
+	CLK(NULL,		"clk_tdm1",		&clk_tdm1),
+	CLK(NULL,		"clk_debugss",		&clk_debugss),
+	CLK(NULL,		"clk_ethss_rgmii",	&clk_ethss_rgmii),
+	CLK(NULL,		"clk_system",		&clk_system),
+	CLK(NULL,		"clk_imcop",		&clk_imcop),
+	CLK(NULL,		"clk_spare",		&clk_spare),
+	CLK("davinci_mmc.1",	NULL,			&clk_sdio1),
+	CLK(NULL,		"clk_usb1",		&clk_usb1),
+	CLK(NULL,		"clk_usbss",		&clk_usbss),
+	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
+	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
+	CLK(NULL,		NULL,			NULL),
+};
+
+static const struct mux_config pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+	MUX_CFG(TNETV107X, ASR_A00,		0, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO32,		0, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A01,		0, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO33,		0, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A02,		0, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO34,		0, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A03,		0, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO35,		0, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A04,		0, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO36,		0, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A05,		0, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO37,		0, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A06,		1, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO38,		1, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A07,		1, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO39,		1, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A08,		1, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO40,		1, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A09,		1, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO41,		1, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A10,		1, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO42,		1, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A11,		1, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_0,		1, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A12,		2, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_1,		2, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A13,		2, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO43,		2, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A14,		2, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO44,		2, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A15,		2, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO45,		2, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A16,		2, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO46,		2, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A17,		2, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO47,		2, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_A18,		3, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO48,		3, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA3_0,	3, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A19,		3, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO49,		3, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA2_0,	3, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A20,		3, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO50,		3, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA1_0,	3, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A21,		3, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO51,		3, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA0_0,	3, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A22,		3, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO52,		3, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_CMD_0,		3, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_A23,		3, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO53,		3, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO1_CLK_0,		3, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_BA_1,		4, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO54,		4, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SYS_PLL_CLK,		4, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_CS0,		4, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_CS1,		4, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_CS2,		4, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM_PLL_CLK,		4, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_CS3,		4, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ETH_PHY_CLK,		4, 20, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, ASR_D00,		4, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO55,		4, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D01,		5, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO56,		5, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D02,		5, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO57,		5, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D03,		5, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO58,		5, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D04,		5, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO59_0,		5, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D05,		5, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO60_0,		5, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D06,		5, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO61_0,		5, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D07,		6, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO62_0,		6, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D08,		6, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO63_0,		6, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D09,		6, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO64_0,		6, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D10,		6, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA3_1,	6, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D11,		6, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA2_1,	6, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D12,		6, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA1_1,	6, 25, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D13,		7, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_DATA0_1,	7, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D14,		7, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_CMD_1,		7, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_D15,		7, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SDIO1_CLK_1,		7, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_OE,		7, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_2,		7, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_RNW,		7, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO29_0,		7, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WAIT,		7, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO30_0,		7, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WE,		8, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, BOOT_STRP_3,		8, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, ASR_WE_DQM0,		8, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO31,		8, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD17_0,		8, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, ASR_WE_DQM1,		8, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_BA0_0,		8, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, VLYNQ_CLK,		9, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO14,		9, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD19_0,		9, 0, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_RXD0,		9, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO15,		9, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD20_0,		9, 5, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_RXD1,		9, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO16,		9, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD21_0,		9, 10, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_TXD0,		9, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO17,		9, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD22_0,		9, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, VLYNQ_TXD1,		9, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO18,		9, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD23_0,		9, 20, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, SDIO0_CLK,		10, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO19,		10, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_CMD,		10, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO20,		10, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA0,		10, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO21,		10, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA1,		10, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO22,		10, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA2,		10, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO23,		10, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SDIO0_DATA3,		10, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO24,		10, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, EMU0,		11, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, EMU1,		11, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, RTCK,		12, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TRST_N,		12, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TCK,			12, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDI,			12, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDO,			12, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TMS,			12, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_CLK,		13, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_RX,		13, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_TX,		13, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM1_FS,		13, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R0,		14, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R1,		14, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R2,		14, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R3,		14, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R4,		14, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R5,		14, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_R6,		15, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO12,		15, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, KEYPAD_R7,		15, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO10,		15, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, KEYPAD_C0,		15, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C1,		15, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C2,		15, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C3,		15, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C4,		16, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C5,		16, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, KEYPAD_C6,		16, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO13,		16, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TEST_CLK_IN,		16, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, KEYPAD_C7,		16, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO11,		16, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, SSP0_0,		17, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_DCLK,		17, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD20_1,		17, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_1,		17, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_CS_N,		17, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD21_1,		17, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_2,		17, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_D,		17, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD22_1,		17, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP0_3,		17, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, SCC_RESETN,		17, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, LCD_PD23_1,		17, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_0,		18, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO25,		18, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_CTS,		18, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_1,		18, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO26,		18, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_RD,		18, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_2,		18, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO27,		18, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_RTS,		18, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, SSP1_3,		18, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO28,		18, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, UART2_TD,		18, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, UART0_CTS,		19, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_RD,		19, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_RTS,		19, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART0_TD,		19, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART1_RD,		19, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, UART1_TD,		19, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_AC_NCS,		20, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_HSYNC_RNW,	20, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_VSYNC_A0,	20, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_MCLK,		20, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD16_0,		20, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PCLK_E,		20, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD00,		20, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD01,		21, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD02,		21, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD03,		21, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD04,		21, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD05,		21, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD06,		21, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD07,		22, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD08,		22, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO59_1,		22, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD09,		22, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO60_1,		22, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD10,		22, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, ASR_BA0_1,		22, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO61_1,		22, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD11,		22, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO62_1,		22, 20, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD12,		22, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO63_1,		22, 25, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD13,		23, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO64_1,		23, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD14,		23, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO29_1,		23, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, LCD_PD15,		23, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO30_1,		23, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, EINT0,		24, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO08,		24, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, EINT1,		24, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, GPIO09,		24, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO00,		24, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD20_2,		24, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TDM_CLK_IN_2,	24, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO01,		24, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD21_2,		24, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, 24M_CLK_OUT_1,	24, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO02,		24, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD22_2,		24, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO03,		24, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD23_2,		24, 25, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, GPIO04,		25, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD16_1,		25, 0, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, USB0_RXERR,		25, 0, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO05,		25, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD17_1,		25, 5, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, TDM_CLK_IN_1,	25, 5, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO06,		25, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD18,		25, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, 24M_CLK_OUT_2,	25, 10, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, GPIO07,		25, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, LCD_PD19_1,		25, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, USB1_RXERR,		25, 15, 0x1f, 0x0c, false)
+	MUX_CFG(TNETV107X, ETH_PLL_CLK,		25, 15, 0x1f, 0x1c, false)
+	MUX_CFG(TNETV107X, MDIO,		26, 0, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, MDC,			26, 5, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, AIC_MUTE_STAT_N,	26, 10, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_CLK,		26, 10, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HNS_EN_N,	26, 15, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_FS,		26, 15, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HDS_EN_STAT_N,	26, 20, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_TX,		26, 20, 0x1f, 0x04, false)
+	MUX_CFG(TNETV107X, AIC_HNF_EN_STAT_N,	26, 25, 0x1f, 0x00, false)
+	MUX_CFG(TNETV107X, TDM0_RX,		26, 25, 0x1f, 0x04, false)
+#endif
+};
+
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 irq_prios[TNETV107X_N_CP_INTC_IRQ] = {
+	/* fill in default priority 7 */
+	[0 ... (TNETV107X_N_CP_INTC_IRQ - 1)]	= 7,
+	/* now override as needed, e.g. [xxx] = 5 */
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id ids[] = {
+	{
+		.variant	= 0x0,
+		.part_no	= 0xb8a1,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_TNETV107X,
+		.name		= "tnetv107x rev1.0",
+	},
+};
+
+static struct davinci_timer_instance timer_instance[2] = {
+	{
+		.base		= TNETV107X_TIMER0_BASE,
+		.bottom_irq	= IRQ_TNETV107X_TIMER_0_TINT12,
+		.top_irq	= IRQ_TNETV107X_TIMER_0_TINT34,
+	},
+	{
+		.base		= TNETV107X_TIMER1_BASE,
+		.bottom_irq	= IRQ_TNETV107X_TIMER_1_TINT12,
+		.top_irq	= IRQ_TNETV107X_TIMER_1_TINT34,
+	},
+};
+
+static struct davinci_timer_info timer_info = {
+	.timers		= timer_instance,
+	.clockevent_id	= T0_BOT,
+	.clocksource_id	= T0_TOP,
+};
+
+/*
+ * TNETV107X platforms do not use the static mappings from Davinci
+ * IO_PHYS/IO_VIRT. This SOC's interesting MMRs are at different addresses,
+ * and changing IO_PHYS would break away from existing Davinci SOCs.
+ *
+ * The primary impact of the current model is that IO_ADDRESS() is not to be
+ * used to map registers on TNETV107X.
+ *
+ * 1.	The first chunk is for INTC:  This needs to be mapped in via iotable
+ *	because ioremap() does not seem to be operational at the time when
+ *	irqs are initialized.  Without this, consistent dma init bombs.
+ *
+ * 2.	The second chunk maps in register areas that need to be populated into
+ *	davinci_soc_info.  Note that alignment restrictions come into play if
+ *	low-level debug is enabled (see note in <mach/tnetv107x.h>).
+ */
+static struct map_desc io_desc[] = {
+	{	/* INTC */
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(TNETV107X_INTC_BASE),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
+	{	/* Most of the rest */
+		.virtual	= TNETV107X_IO_VIRT,
+		.pfn		= __phys_to_pfn(TNETV107X_IO_BASE),
+		.length		= IO_SIZE - SZ_1M,
+		.type		= MT_DEVICE
+	},
+};
+
+static unsigned long clk_sspll_recalc(struct clk *clk)
+{
+	int		pll;
+	unsigned long	mult = 0, prediv = 1, postdiv = 1;
+	unsigned long	ref = OSC_FREQ_ONCHIP, ret;
+	u32		tmp;
+
+	if (WARN_ON(!clk->pll_data))
+		return clk->rate;
+
+	if (!clk_ctrl_regs) {
+		void __iomem *tmp;
+
+		tmp = ioremap(TNETV107X_CLOCK_CONTROL_BASE, SZ_4K);
+
+		if (WARN(!tmp, "failed ioremap for clock control regs\n"))
+			return clk->parent ? clk->parent->rate : 0;
+
+		for (pll = 0; pll < N_PLLS; pll++)
+			sspll_regs[pll] = tmp + sspll_regs_base[pll];
+
+		clk_ctrl_regs = tmp;
+	}
+
+	pll = clk->pll_data->num;
+
+	tmp = __raw_readl(&clk_ctrl_regs->pll_bypass);
+	if (!(tmp & bypass_mask[pll])) {
+		mult	= __raw_readl(&sspll_regs[pll]->mult_factor);
+		prediv	= __raw_readl(&sspll_regs[pll]->pre_div) + 1;
+		postdiv	= __raw_readl(&sspll_regs[pll]->post_div) + 1;
+	}
+
+	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
+	if (tmp & PLLCTL_CLKMODE)
+		ref = pll_ext_freq[pll];
+
+	clk->pll_data->input_rate = ref;
+
+	tmp = __raw_readl(clk->pll_data->base + PLLCTL);
+	if (!(tmp & PLLCTL_PLLEN))
+		return ref;
+
+	ret = ref;
+	if (mult)
+		ret += ((unsigned long long)ref * mult) / 256;
+
+	ret /= (prediv * postdiv);
+
+	return ret;
+}
+
+static void tnetv107x_watchdog_reset(struct platform_device *pdev)
+{
+	struct wdt_regs __iomem *regs;
+
+	regs = ioremap(pdev->resource[0].start, SZ_4K);
+
+	/* disable watchdog */
+	__raw_writel(0x7777, &regs->disable_lock);
+	__raw_writel(0xcccc, &regs->disable_lock);
+	__raw_writel(0xdddd, &regs->disable_lock);
+	__raw_writel(0, &regs->disable);
+
+	/* program prescale */
+	__raw_writel(0x5a5a, &regs->prescale_lock);
+	__raw_writel(0xa5a5, &regs->prescale_lock);
+	__raw_writel(0, &regs->prescale);
+
+	/* program countdown */
+	__raw_writel(0x6666, &regs->change_lock);
+	__raw_writel(0xbbbb, &regs->change_lock);
+	__raw_writel(1, &regs->change);
+
+	/* enable watchdog */
+	__raw_writel(0x7777, &regs->disable_lock);
+	__raw_writel(0xcccc, &regs->disable_lock);
+	__raw_writel(0xdddd, &regs->disable_lock);
+	__raw_writel(1, &regs->disable);
+
+	/* kick */
+	__raw_writel(0x5555, &regs->kick_lock);
+	__raw_writel(0xaaaa, &regs->kick_lock);
+	__raw_writel(1, &regs->kick);
+}
+
+static struct davinci_soc_info tnetv107x_soc_info = {
+	.io_desc		= io_desc,
+	.io_desc_num		= ARRAY_SIZE(io_desc),
+	.ids			= ids,
+	.ids_num		= ARRAY_SIZE(ids),
+	.jtag_id_reg		= TNETV107X_CHIP_CFG_BASE + 0x018,
+	.cpu_clks		= clks,
+	.psc_bases		= psc_regs,
+	.psc_bases_num		= ARRAY_SIZE(psc_regs),
+	.pinmux_base		= TNETV107X_CHIP_CFG_BASE + 0x150,
+	.pinmux_pins		= pins,
+	.pinmux_pins_num	= ARRAY_SIZE(pins),
+	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
+	.intc_base		= TNETV107X_INTC_BASE,
+	.intc_irq_prios		= irq_prios,
+	.intc_irq_num		= TNETV107X_N_CP_INTC_IRQ,
+	.intc_host_map		= intc_host_map,
+	.gpio_base		= TNETV107X_GPIO_BASE,
+	.gpio_type		= GPIO_TYPE_TNETV107X,
+	.gpio_num		= TNETV107X_N_GPIO,
+	.timer_info		= &timer_info,
+	.serial_dev		= &tnetv107x_serial_device,
+	.reset			= tnetv107x_watchdog_reset,
+	.reset_device		= &tnetv107x_wdt_device,
+};
+
+void __init tnetv107x_init(void)
+{
+	davinci_common_init(&tnetv107x_soc_info);
+}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 7f3039761d9..8bf3cec98cf 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -43,7 +43,8 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
-
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate);
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_xtali = {
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -112,6 +113,29 @@ static struct clk clk_video = {
 	.set_rate	= set_div_rate,
 };
 
+static struct clk clk_i2s_mclk = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
+static struct clk clk_i2s_sclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_mclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_sclk_rate,
+};
+
+static struct clk clk_i2s_lrclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_sclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_lrclk_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.parent		= &clk_h,
@@ -191,6 +215,9 @@ static struct clk_lookup clocks[] = {
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
+	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),
+	INIT_CK("ep93xx-i2s",		"sclk",		&clk_i2s_sclk),
+	INIT_CK("ep93xx-i2s",		"lrclk",	&clk_i2s_lrclk),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -401,6 +428,44 @@ static int set_div_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg);
+
+	if (rate == clk_i2s_mclk.rate / 2)
+		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else if (rate == clk_i2s_mclk.rate / 4)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_sclk.rate = rate;
+	return 0;
+}
+
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg) & 
+		~EP93XX_I2SCLKDIV_LRDIV_MASK;
+	
+	if (rate == clk_i2s_sclk.rate / 32)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 64)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 128)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_lrclk.rate = rate;
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8e37a045188..4cb55d3902f 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -758,6 +758,73 @@ void ep93xx_keypad_release_gpio(struct platform_device *pdev)
 }
 EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+	{
+		.start	= EP93XX_I2S_PHYS_BASE,
+		.end	= EP93XX_I2S_PHYS_BASE + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_i2s_device = {
+	.name		= "ep93xx-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
+	.resource	= ep93xx_i2s_resource,
+};
+
+void __init ep93xx_register_i2s(void)
+{
+	platform_device_register(&ep93xx_i2s_device);
+}
+
+#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
+					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
+
+#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
+					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
+
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+{
+	unsigned val;
+
+	/* Sanity check */
+	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
+		return -EINVAL;
+	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
+		return -EINVAL;
+
+	/* Must have only one of I2SONSSP/I2SONAC97 set */
+	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
+	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
+		return -EINVAL;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+	ep93xx_devcfg_set_bits(i2s_pins);
+
+	/*
+	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
+	 * lrclk. Since the i2s driver is the only user of those clocks we
+	 * rely on it to prevent parallel use of this function and the 
+	 * clock api for the i2s clocks.
+	 */
+	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+	val &= ~EP93XX_I2SCLKDIV_MASK;
+	val |= i2s_config;
+	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
+
+	return 0;
+}
+EXPORT_SYMBOL(ep93xx_i2s_acquire);
+
+void ep93xx_i2s_release(void)
+{
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+}
+EXPORT_SYMBOL(ep93xx_i2s_release);
 
 extern void ep93xx_gpio_init(void);
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1e096f0c2d..c54b3e56ba6 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -93,6 +93,7 @@
 /* APB peripherals */
 #define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 
+#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
 #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
 #define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
@@ -194,6 +195,15 @@
 #define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
 #define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
 #define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
+#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
+#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128 	(2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK 	(3 << 17)
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index a6c09176334..3330b36d79e 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -58,6 +58,9 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
+void ep93xx_register_i2s(void);
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+void ep93xx_i2s_release(void);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 38deaee4039..a12c8930129 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -157,6 +157,7 @@ static void __init snappercl15_init_machine(void)
 	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
 			    ARRAY_SIZE(snappercl15_i2c_data));
 	ep93xx_register_fb(&snappercl15_fb_info);
+	ep93xx_register_i2s();
 	platform_device_register(&snappercl15_nand_device);
 }
 
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 9dd67c7b445..1c82d4290da 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -25,6 +25,7 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
+#include <plat/audio.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
@@ -871,6 +872,42 @@ struct sys_timer kirkwood_timer = {
 	.init = kirkwood_timer_init,
 };
 
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_i2s_resources[] = {
+	[0] = {
+		.start  = AUDIO_PHYS_BASE,
+		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_KIRKWOOD_I2S,
+		.end    = IRQ_KIRKWOOD_I2S,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+	.dram        = &kirkwood_mbus_dram_info,
+	.burst       = 128,
+};
+
+static struct platform_device kirkwood_i2s_device = {
+	.name		= "kirkwood-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
+	.resource	= kirkwood_i2s_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2s_data,
+	},
+};
+
+void __init kirkwood_audio_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_AUDIO;
+	platform_device_register(&kirkwood_i2s_device);
+}
 
 /*****************************************************************************
  * General
@@ -939,6 +976,7 @@ void __init kirkwood_init(void)
 	kirkwood_spi_plat_data.tclk = kirkwood_tclk;
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+	kirkwood_i2s_data.tclk = kirkwood_tclk;
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5b2c1c18d64..95bb0a73adf 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -17,6 +17,7 @@ struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
 struct mtd_info;
+struct kirkwood_asoc_platform_data;
 
 #define KW_PCIE0	(1 << 0)
 #define KW_PCIE1	(1 << 1)
@@ -46,6 +47,7 @@ void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index d141af4c274..93fc2ec95e7 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -111,6 +111,9 @@
 
 #define SDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x90000)
 
+#define AUDIO_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0xA0000)
+#define AUDIO_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0xA0000)
+
 /*
  * Supported devices and revisions.
  */
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index fd64cd2b4e0..fd06be61881 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -15,6 +15,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
@@ -60,6 +61,12 @@ static unsigned int openrd_mpp_config[] __initdata = {
 	0
 };
 
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("cs42l51", 0x4a),
+	},
+};
+
 static void __init openrd_init(void)
 {
 	/*
@@ -86,6 +93,12 @@ static void __init openrd_init(void)
 	kirkwood_sdio_init(&openrd_mvsdio_data);
 
 	kirkwood_i2c_init();
+
+	if (machine_is_openrd_client()) {
+		i2c_register_board_info(0, i2c_board_info,
+			ARRAY_SIZE(i2c_board_info));
+		kirkwood_audio_init();
+	}
 }
 
 static int __init openrd_pci_init(void)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index b18d7c28ab7..3b02d3b944a 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -1,3 +1,7 @@
+if ARCH_OMAP1
+
+menu "TI OMAP1 specific features"
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP1
 
@@ -224,6 +228,12 @@ config OMAP_ARM_120MHZ
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
+config OMAP_ARM_96MHZ
+	bool "OMAP ARM 96 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
+	help
+          Enable 96MHz clock for OMAP CPU. If unsure, say N.
+
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
@@ -237,3 +247,6 @@ config OMAP_ARM_30MHZ
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
+endmenu
+
+endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index ea231c7a550..facfaeb1ae5 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -23,6 +23,9 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
+usb-fs-$(CONFIG_USB)			:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 0a9d61d2d22..41992ab7196 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -235,7 +235,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
-	omap_usb_init(&ams_delta_usb_config);
+	omap1_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 059bac60b35..180ce79e5ea 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -292,6 +292,18 @@ static void __init omap_fsample_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = fsample_config;
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 7a65684d2a1..93b9ab8fc3b 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -72,12 +72,12 @@ static void __init omap_generic_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		omap_usb_init(&generic1510_usb_config);
+		omap1_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		omap_usb_init(&generic1610_usb_config);
+		omap1_usb_init(&generic1610_usb_config);
 	}
 #endif
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 68b2beda8b9..d2cda58bcc4 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = {
 
 #define H2_IRDA_FIRSEL_GPIO_PIN	17
 
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-static int h2_transceiver_mode(struct device *dev, int state)
-{
-	/* SIR when low, else MIR/FIR when HIGH */
-	gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE));
-	return 0;
-}
-#endif
-
 static struct omap_irda_config h2_irda_data = {
 	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
 	.rx_channel		= OMAP_DMA_UART3_RX,
@@ -437,14 +428,18 @@ static void __init h2_init(void)
 	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
-	/* Irda */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
-	if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0)
-		BUG();
-	gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-	h2_irda_data.transceiver_mode = h2_transceiver_mode;
-#endif
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
@@ -452,7 +447,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
-	omap_usb_init(&h2_usb_config);
+	omap1_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 0b0825fe675..c2ef4ff846c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -397,6 +397,19 @@ static void __init h3_init(void)
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
 	omap_cfg_reg(V2_1710_GPIO10);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	spi_register_board_info(h3_spi_board_info,
 				ARRAY_SIZE(h3_spi_board_info));
@@ -405,7 +418,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
-	omap_usb_init(&h3_usb_config);
+	omap1_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index d70a4f0923f..311899ff5ff 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -287,7 +287,7 @@ static void __init htcherald_init(void)
 	htcherald_disable_watchdog();
 
 	htcherald_usb_enable();
-	omap_usb_init(&htcherald_usb_config);
+	omap1_usb_init(&htcherald_usb_config);
 }
 
 static void __init htcherald_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 91064b37859..3daf87ad257 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -422,13 +422,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_usb_init(&innovator1510_usb_config);
+		omap1_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		omap_usb_init(&h2_usb_config);
+		omap1_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index bc93afbb0a6..51a4539aecf 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
-#include <plat/dsp_common.h>
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
@@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if	defined(CONFIG_OMAP_DSP)
-/*
- * audio power control
- */
-#define	HEADPHONE_GPIO		14
-#define	AMPLIFIER_CTRL_GPIO	58
-
-static struct clk *dspxor_ck;
-static DEFINE_MUTEX(audio_pwr_lock);
-/*
- * audio_pwr_state
- * +--+-------------------------+---------------------------------------+
- * |-1|down			|power-up request -> 0			|
- * +--+-------------------------+---------------------------------------+
- * | 0|up			|power-down(1) request -> 1		|
- * |  |				|power-down(2) request -> (ignore)	|
- * +--+-------------------------+---------------------------------------+
- * | 1|up,			|power-up request -> 0			|
- * |  |received down(1) request	|power-down(2) request -> -1		|
- * +--+-------------------------+---------------------------------------+
- */
-static int audio_pwr_state = -1;
-
-static inline void aic23_power_up(void)
-{
-}
-static inline void aic23_power_down(void)
-{
-}
-
-/*
- * audio_pwr_up / down should be called under audio_pwr_lock
- */
-static void nokia770_audio_pwr_up(void)
-{
-	clk_enable(dspxor_ck);
-
-	/* Turn on codec */
-	aic23_power_up();
-
-	if (gpio_get_value(HEADPHONE_GPIO))
-		/* HP not connected, turn on amplifier */
-		gpio_set_value(AMPLIFIER_CTRL_GPIO, 1);
-	else
-		/* HP connected, do not turn on amplifier */
-		printk("HP connected\n");
-}
-
-static void codec_delayed_power_down(struct work_struct *work)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		aic23_power_down();
-	clk_disable(dspxor_ck);
-	mutex_unlock(&audio_pwr_lock);
-}
-
-static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
-
-static void nokia770_audio_pwr_down(void)
-{
-	/* Turn off amplifier */
-	gpio_set_value(AMPLIFIER_CTRL_GPIO, 0);
-
-	/* Turn off codec: schedule delayed work */
-	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
-}
-
-static int
-nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		nokia770_audio_pwr_up();
-	/* force audio_pwr_state = 0, even if it was 1. */
-	audio_pwr_state = 0;
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static int
-nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	switch (stage) {
-	case 1:
-		if (audio_pwr_state == 0)
-			audio_pwr_state = 1;
-		break;
-	case 2:
-		if (audio_pwr_state == 1) {
-			nokia770_audio_pwr_down();
-			audio_pwr_state = -1;
-		}
-		break;
-	}
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static struct dsp_kfunc_device nokia770_audio_device = {
-	.name	 = "audio",
-	.type	 = DSP_KFUNC_DEV_TYPE_AUDIO,
-	.enable  = nokia770_audio_pwr_up_request,
-	.disable = nokia770_audio_pwr_down_request,
-};
-
-static __init int omap_dsp_init(void)
-{
-	int ret;
-
-	dspxor_ck = clk_get(0, "dspxor_ck");
-	if (IS_ERR(dspxor_ck)) {
-		printk(KERN_ERR "couldn't acquire dspxor_ck\n");
-		return PTR_ERR(dspxor_ck);
-	}
-
-	ret = dsp_kfunc_device_register(&nokia770_audio_device);
-	if (ret) {
-		printk(KERN_ERR
-		       "KFUNC device registration failed: %s\n",
-		       nokia770_audio_device.name);
-		goto out;
-	}
-	return 0;
- out:
-	return ret;
-}
-#else
-#define omap_dsp_init()		do {} while (0)
-#endif	/* CONFIG_OMAP_DSP */
-
 static void __init omap_nokia770_init(void)
 {
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
@@ -382,11 +249,10 @@ static void __init omap_nokia770_init(void)
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_dsp_init();
 	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
-	omap_usb_init(&nokia770_usb_config);
+	omap1_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e2a72af3089..679740cc1e9 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -560,7 +560,7 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
-	omap_usb_init(&osk_usb_config);
+	omap1_usb_init(&osk_usb_config);
 
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 61a2321b973..782bb257a85 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -213,90 +213,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-#ifdef CONFIG_APM
-/*
- * Values measured in 10 minute intervals averaged over 10 samples.
- * May differ slightly from device to device but should be accurate
- * enough to give basic idea of battery life left and trigger
- * potential alerts.
- */
-static const int palmte_battery_sample[] = {
-	2194, 2157, 2138, 2120,
-	2104, 2089, 2075, 2061,
-	2048, 2038, 2026, 2016,
-	2008, 1998, 1989, 1980,
-	1970, 1958, 1945, 1928,
-	1910, 1888, 1860, 1827,
-	1791, 1751, 1709, 1656,
-};
-
-#define INTERVAL		10
-#define BATTERY_HIGH_TRESHOLD	66
-#define BATTERY_LOW_TRESHOLD	33
-
-static void palmte_get_power_status(struct apm_power_info *info, int *battery)
-{
-	int charging, batt, hi, lo, mid;
-
-	charging = !gpio_get_value(PALMTE_DC_GPIO);
-	batt = battery[0];
-	if (charging)
-		batt -= 60;
-
-	hi = ARRAY_SIZE(palmte_battery_sample);
-	lo = 0;
-
-	info->battery_flag = 0;
-	info->units = APM_UNITS_MINS;
-
-	if (batt > palmte_battery_sample[lo]) {
-		info->battery_life = 100;
-		info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
-	} else if (batt <= palmte_battery_sample[hi - 1]) {
-		info->battery_life = 0;
-		info->time = 0;
-	} else {
-		while (hi > lo + 1) {
-			mid = (hi + lo) >> 1;
-			if (batt <= palmte_battery_sample[mid])
-				lo = mid;
-			else
-				hi = mid;
-		}
-
-		mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
-		hi = palmte_battery_sample[lo] - batt;
-		info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
-			ARRAY_SIZE(palmte_battery_sample);
-		info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
-				lo) - INTERVAL * hi / mid;
-	}
-
-	if (charging) {
-		info->ac_line_status = APM_AC_ONLINE;
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-		info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
-	} else {
-		info->ac_line_status = APM_AC_OFFLINE;
-		if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_HIGH;
-		else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_LOW;
-		else
-			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
-	}
-
-	if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_HIGH;
-	else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_LOW;
-	else
-		info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
-}
-#else
-#define palmte_get_power_status	NULL
-#endif
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 };
@@ -359,7 +275,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
-	omap_usb_init(&palmte_usb_config);
+	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 21c01c6afcc..0b35ef54a64 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
-	omap_usb_init(&palmtt_usb_config);
+	omap1_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index f3249245153..66362903b6e 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -325,7 +325,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
-	omap_usb_init(&palmz71_usb_config);
+	omap1_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 8b5ab1fcc40..34ab354758b 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = perseus2_config;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 995566b862b..2eb148b8de9 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -392,7 +392,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_usb_init(&sx1_usb_config);
+	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 4c483dc1de5..6b3cf14bc75 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -198,7 +198,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
-	omap_usb_init(&voiceblue_usb_config);
+	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 6bbb1b8b829..b8c7fb9d792 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -11,7 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
@@ -34,9 +33,9 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
+ */
 
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
@@ -523,7 +522,8 @@ const struct clkops clkops_dspck = {
 	.disable	= omap1_clk_disable_dsp_domain,
 };
 
-static int omap1_clk_enable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
 {
 	int ret;
 	struct uart_clk *uclk;
@@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk)
 	return ret;
 }
 
-static void omap1_clk_disable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
 {
 	struct uart_clk *uclk;
 
@@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
 	omap1_clk_disable_generic(clk);
 }
 
-const struct clkops clkops_uart = {
-	.enable		= omap1_clk_enable_uart_functional,
-	.disable	= omap1_clk_disable_uart_functional,
+/* XXX SYSC register handling does not belong in the clock framework */
+const struct clkops clkops_uart_16xx = {
+	.enable		= omap1_clk_enable_uart_functional_16xx,
+	.disable	= omap1_clk_disable_uart_functional_16xx,
 };
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
@@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 clock reset and init functions
- *-------------------------------------------------------------------------*/
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 75d0d7d90bf..eaf09efb91c 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
 extern const struct clkops clkops_dspck;
 extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_uart;
+extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index aa8558adbf1..af54114b8f0 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -8,6 +8,10 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * To do:
+ * - Clocks that are only available on some chips should be marked with the
+ *   chips that they are present on.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +27,49 @@
 
 #include "clock.h"
 
-/*------------------------------------------------------------------------
+/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
+#define IDL_CLKOUT_ARM_SHIFT			12
+#define IDLTIM_ARM_SHIFT			9
+#define IDLAPI_ARM_SHIFT			8
+#define IDLIF_ARM_SHIFT				6
+#define IDLLB_ARM_SHIFT				4	/* undocumented? */
+#define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
+#define IDLPER_ARM_SHIFT			2
+#define IDLXORP_ARM_SHIFT			1
+#define IDLWDT_ARM_SHIFT			0
+
+/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_UART3_CLK_MODE_R		31
+#define CONF_MOD_UART2_CLK_MODE_R		30
+#define CONF_MOD_UART1_CLK_MODE_R		29
+#define CONF_MOD_MMC_SD_CLK_REQ_R		23
+#define CONF_MOD_MCBSP3_AUXON			20
+
+/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_SOSSI_CLK_EN_R			16
+
+/* Some OTG_SYSCON_2-specific bit fields */
+#define OTG_SYSCON_2_UHOST_EN_SHIFT		8
+
+/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
+#define SOFT_MMC2_DPLL_REQ_SHIFT	13
+#define SOFT_MMC_DPLL_REQ_SHIFT		12
+#define SOFT_UART3_DPLL_REQ_SHIFT	11
+#define SOFT_UART2_DPLL_REQ_SHIFT	10
+#define SOFT_UART1_DPLL_REQ_SHIFT	9
+#define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
+#define SOFT_CAM_DPLL_REQ_SHIFT		7
+#define SOFT_COM_MCKO_REQ_SHIFT		6
+#define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
+#define USB_REQ_EN_SHIFT		4
+#define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
+#define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
+#define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
+#define SOFT_DPLL_REQ_SHIFT		0
+
+/*
  * Omap1 clocks
- *-------------------------------------------------------------------------*/
+ */
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
@@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 12,
+	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
 };
 
 static struct clk sossi_ck = {
@@ -63,7 +107,7 @@ static struct clk sossi_ck = {
 	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
+	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
 };
@@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 2,
+	.idlect_shift	= IDLPER_ARM_SHIFT,
 };
 
 /*
@@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 1,
+	.idlect_shift	= IDLXORP_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armtim_ck = {
@@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 9,
+	.idlect_shift	= IDLTIM_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armwdt_ck = {
@@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.fixed_div	= 14,
 		.recalc		= &omap_fixed_divisor_recalc,
 	},
-	.idlect_shift	= 0,
+	.idlect_shift	= IDLWDT_ARM_SHIFT,
 };
 
 static struct clk arminth_ck16xx = {
@@ -212,7 +256,6 @@ static struct clk dsptim_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
@@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 6,
+	.idlect_shift	= IDLIF_ARM_SHIFT,
 };
 
 static struct clk arminth_ck1510 = {
@@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = {
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 8,
+	.idlect_shift	= IDLAPI_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk lb_ck = {
@@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = {
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 4,
+	.idlect_shift	= IDLLB_ARM_SHIFT,
 };
 
 static struct clk rhea1_ck = {
@@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 3,
+	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
 	.ops		= &clkops_null,
@@ -370,25 +419,37 @@ static struct clk uart1_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart1_16xx = {
 	.clk	= {
 		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
+		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb0054,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	.ops		= &clkops_null,
@@ -397,11 +458,17 @@ static struct clk uart2_ck = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
 	.ops		= &clkops_null,
@@ -410,21 +477,27 @@ static struct clk uart3_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart3_16xx = {
 	.clk	= {
 		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
+		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb9854,
 };
@@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
+	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
 };
 
 static struct clk usb_dc_ck = {
@@ -466,7 +539,7 @@ static struct clk usb_dc_ck = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
+	.enable_bit	= USB_REQ_EN_SHIFT,
 };
 
 static struct clk usb_dc_ck7xx = {
@@ -475,7 +548,25 @@ static struct clk usb_dc_ck7xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 8,
+	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
+};
+
+static struct clk uart1_7xx = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 9,
+};
+
+static struct clk uart2_7xx = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 11,
 };
 
 static struct clk mclk_1510 = {
@@ -484,7 +575,7 @@ static struct clk mclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
+	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
 };
 
 static struct clk mclk_16xx = {
@@ -524,9 +615,13 @@ static struct clk mmc1_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
+	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
 };
 
+/*
+ * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
+ * CONF_MOD_MCBSP3_AUXON ??
+ */
 static struct clk mmc2_ck = {
 	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
@@ -546,7 +641,7 @@ static struct clk mmc3_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 12,
+	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
 };
 
 static struct clk virtual_ck_mpu = {
@@ -620,7 +715,9 @@ static struct omap_clk omap_clks[] = {
 	/* ULPD clocks */
 	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
 	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
 	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 379100c1763..aa0725608fb 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -63,44 +63,7 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-#  define OMAP1_MBOX_SIZE	0x23
-#  define INT_DSP_MAILBOX1	INT_1510_DSP_MAILBOX1
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#  define OMAP1_MBOX_SIZE	0x2f
-#  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
-#endif
-
-#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
-
-static struct resource mbox_resources[] = {
-	{
-		.start		= OMAP1_MBOX_BASE,
-		.end		= OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_DSP_MAILBOX1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mbox_device = {
-	.name		= "omap1-mailbox",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mbox_resources),
-	.resource	= mbox_resources,
-};
-
-static inline void omap_init_mbox(void)
-{
-	platform_device_register(&mbox_device);
-}
-#else
 static inline void omap_init_mbox(void) { }
-#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -230,42 +193,7 @@ static inline void omap_init_spi100k(void)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_OMAP_STI)
-
-#define OMAP1_STI_BASE		0xfffea000
-#define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP1_STI_BASE,
-		.end		= OMAP1_STI_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP1_STI_CHANNEL_BASE,
-		.end		= OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_STI,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
-	platform_device_register(&sti_device);
-}
-#else
 static inline void omap_init_sti(void) {}
-#endif
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index e8a8cf36b7f..671408eb4ab 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -33,7 +33,7 @@ omap_uart_virt:	.word	0x0
 		/* Use omap_uart_phys/virt if already configured */
 9:		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
 		ldrne	\rx, =omap_uart_virt	@ virtual base
 		ldr	\rx, [\rx, #0]
 		cmp	\rx, #0			@ is port configured?
@@ -68,11 +68,15 @@ omap_uart_virt:	.word	0x0
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rx, \rx, #0xff000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		sub	\rx, \rx, #0xff000000	@ phys base
 		add	\rx, \rx, #0xfe000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		b	9b
 99:
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 4f5b3da3d55..1a85a421007 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -1,5 +1,5 @@
 /*
- * Mailbox reservation modules for DSP
+ * Mailbox reservation modules for OMAP1
  *
  * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
@@ -9,13 +9,10 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
 #define MAILBOX_ARM2DSP1b		0x04
@@ -83,7 +80,7 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
 	struct omap_mbox1_fifo *fifo =
 		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
 
-	return (mbox_read_reg(fifo->flag));
+	return mbox_read_reg(fifo->flag);
 }
 
 /* irq */
@@ -141,47 +138,37 @@ struct omap_mbox mbox_dsp_info = {
 	.ops	= &omap1_mbox_ops,
 	.priv	= &omap1_mbox_dsp_priv,
 };
-EXPORT_SYMBOL(mbox_dsp_info);
+
+struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
+	int ret;
+	int i;
+	struct omap_mbox **list;
 
-	if (pdev->num_resources != 2) {
-		dev_err(&pdev->dev, "invalid number of resources: %d\n",
-			pdev->num_resources);
-		return -ENODEV;
-	}
+	list = omap1_mboxes;
+	list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
-	}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
 
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		return -ENODEV;
-	}
-
-	/* DSP IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
 		iounmap(mbox_base);
-		return -ENODEV;
+		return ret;
 	}
-	mbox_dsp_info.irq = res->start;
 
-	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	return 0;
 }
 
 static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
-	omap_mbox_unregister(&mbox_dsp_info);
-
+	omap_mbox_unregister();
+	iounmap(mbox_base);
 	return 0;
 }
 
@@ -189,7 +176,7 @@ static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
 	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "omap1-mailbox",
+		.name	= "omap-mailbox",
 	},
 };
 
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index e9bdff192f8..b3a796a6da0 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -23,7 +23,6 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
-#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id)
 				clk_enable(api_clk);
 				clk_enable(dsp_clk);
 
-				omap_dsp_request_mem();
 				/*
 				 * DSP external peripheral reset
 				 * FIXME: This should be moved to dsp code
@@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id)
 {
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
 		if (--dsp_use == 0) {
-			omap_dsp_release_mem();
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);
 				clk_put(api_clk);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 84341377232..7835add0034 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
 MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
 MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
 MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
+
+/* UART pins */
+MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
 };
 #define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
@@ -440,7 +444,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 	}
 #endif
 
-#ifdef CONFIG_OMAP_MUX_ERRORS
+#ifdef CONFIG_OMAP_MUX_WARNINGS
 	return warn ? -ETXTBSY : 0;
 #else
 	return 0;
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 349de90194e..b78d0749f13 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -122,6 +122,13 @@ void __init omap_serial_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
 
+		/* Don't look at UARTs higher than 2 for omap7xx */
+		if (cpu_is_omap7xx() && i > 1) {
+			serial_platform_data[i].membase = NULL;
+			serial_platform_data[i].mapbase = 0;
+			continue;
+		}
+
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
new file mode 100644
index 00000000000..19de03b074e
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.c
@@ -0,0 +1,530 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+/* These routines should handle the standard chip-specific modes
+ * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ *
+ * Some board-*.c files will need to set up additional mux options,
+ * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
+ */
+
+/* TESTED ON:
+ *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
+ *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
+ *  - 1510 Innovator UDC with bundled usb0 cable
+ *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
+ *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
+ *  - 1710 custom development board using alternate pin group
+ *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ */
+
+#define INT_USB_IRQ_GEN		IH2_BASE + 20
+#define INT_USB_IRQ_NISO	IH2_BASE + 30
+#define INT_USB_IRQ_ISO		IH2_BASE + 29
+#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
+#define INT_USB_IRQ_OTG		IH2_BASE + 8
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	/* IRQ numbers for omap7xx */
+	if(cpu_is_omap7xx()) {
+		udc_resources[1].start = INT_7XX_USB_GENI;
+		udc_resources[2].start = INT_7XX_USB_NON_ISO;
+		udc_resources[3].start = INT_7XX_USB_ISO;
+	}
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		ohci_resources[1].start = INT_7XX_USB_HHC_1;
+	pdata->ohci_device = &ohci_device;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		otg_resources[1].start = INT_7XX_USB_OTG;
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	if (nwires == 0) {
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			/* pulldown D+/D- */
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		return 0;
+	}
+
+	if (is_device) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
+			omap_cfg_reg(W4_USB_PUEN);
+	}
+
+	if (nwires == 2) {
+		u32 l;
+
+		// omap_cfg_reg(P9_USB_DP);
+		// omap_cfg_reg(R8_USB_DM);
+
+		if (cpu_is_omap15xx()) {
+			/* This works on 1510-Innovator */
+			return 0;
+		}
+
+		/* NOTES:
+		 *  - peripheral should configure VBUS detection!
+		 *  - only peripherals may use the internal D+/D- pulldowns
+		 *  - OTG support on this port not yet written
+		 */
+
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+
+		return 3 << 16;
+	}
+
+	/* alternate pin config, external transceiver */
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
+		return 0;
+	}
+
+	omap_cfg_reg(V6_USB0_TXD);
+	omap_cfg_reg(W9_USB0_TXEN);
+	omap_cfg_reg(W5_USB0_SE0);
+	if (nwires != 3)
+		omap_cfg_reg(Y5_USB0_RCV);
+
+	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
+	 * may be able to use I2C requests to set those bits along
+	 * with VBUS switching and overcurrent detection.
+	 */
+
+	if (nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		{
+			u32 l;
+
+			omap_cfg_reg(AA9_USB0_VP);
+			omap_cfg_reg(R9_USB0_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+u32 __init omap1_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB1_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+	if (nwires == 0)
+		return 0;
+
+	/* external transceiver */
+	omap_cfg_reg(USB1_TXD);
+	omap_cfg_reg(USB1_TXEN);
+	if (nwires != 3)
+		omap_cfg_reg(USB1_RCV);
+
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB1_SEO);
+		omap_cfg_reg(USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
+		omap_cfg_reg(W13_1610_USB1_SE0);
+		omap_cfg_reg(R13_1610_USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1710()) {
+		omap_cfg_reg(R13_1710_USB1_SE0);
+		// SUSP
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(USB1_VP);
+		omap_cfg_reg(USB1_VM);
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB1_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	/* external transceiver */
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB2_TXD);
+		omap_cfg_reg(USB2_TXEN);
+		omap_cfg_reg(USB2_SEO);
+		if (nwires != 3)
+			omap_cfg_reg(USB2_RCV);
+		/* there is no USB2_SPEED */
+	} else if (cpu_is_omap16xx()) {
+		omap_cfg_reg(V6_USB2_TXD);
+		omap_cfg_reg(W9_USB2_TXEN);
+		omap_cfg_reg(W5_USB2_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB2_RCV);
+		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	// omap_cfg_reg(USB2_SUSP);
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 5:
+		goto bad;
+	case 6:
+		syscon1 = 3;
+		if (cpu_is_omap15xx()) {
+			omap_cfg_reg(USB2_VP);
+			omap_cfg_reg(USB2_VM);
+		} else {
+			u32 l;
+
+			omap_cfg_reg(AA9_USB2_VP);
+			omap_cfg_reg(R9_USB2_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+#ifdef	CONFIG_ARCH_OMAP15XX
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
+
+static void __init omap_1510_usb_init(struct omap_usb_config *config)
+{
+	unsigned int val;
+	u16 w;
+
+	config->usb0_init(config->pins[0], is_usb0_device(config));
+	config->usb1_init(config->pins[1]);
+	config->usb2_init(config->pins[2], 0);
+
+	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
+	val |= (config->hmc_mode << 1);
+	omap_writel(val, MOD_CONF_CTRL_0);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	printk("\n");
+
+	/* use DPLL for 48 MHz function clock */
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+	w = omap_readw(ULPD_APLL_CTRL);
+	w &= ~APLL_NDPLL_SWITCH;
+	omap_writew(w, ULPD_APLL_CTRL);
+
+	w = omap_readw(ULPD_DPLL_CTRL);
+	w |= DPLL_IOB | DPLL_PLL_ENABLE;
+	omap_writew(w, ULPD_DPLL_CTRL);
+
+	w = omap_readw(ULPD_SOFT_REQ);
+	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
+
+	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
+		cpu_relax();
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->register_dev) {
+		int status;
+
+		udc_device.dev.platform_data = config;
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+		/* udc driver gates 48MHz by D+ pullup */
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->register_host) {
+		int status;
+
+		ohci_device.dev.platform_data = config;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+		/* hcd explicitly gates 48MHz */
+	}
+#endif
+}
+
+#else
+static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+#endif
+
+void __init omap1_usb_init(struct omap_usb_config *pdata)
+{
+	pdata->usb0_init = omap1_usb0_init;
+	pdata->usb1_init = omap1_usb1_init;
+	pdata->usb2_init = omap1_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+
+	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+		omap_otg_init(pdata);
+	else if (cpu_is_omap15xx())
+		omap_1510_usb_init(pdata);
+	else
+		printk(KERN_ERR "USB: No init for your chip yet\n");
+}
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index b31b6f12312..b48bacf0a7a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,22 +1,77 @@
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select REGULATOR
+	select PM
+	select PM_RUNTIME
+	select VFP
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
+	select I2C
+	select I2C_OMAP
+	select MFD
+	select MENELAUS if ARCH_OMAP2
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	help
+	  Compile a kernel suitable for booting most boards
+
+config ARCH_OMAP2
+	bool "TI OMAP2"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V6
+
+config ARCH_OMAP3
+	bool "TI OMAP3"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V7
+	select USB_ARCH_HAS_EHCI
+	select ARM_L1_CACHE_SHIFT_6
+
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	default y
+	depends on ARCH_OMAP2PLUS
+	select CPU_V7
+	select ARM_GIC
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
+	default y
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	default y
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
+	default y
 	select ARCH_OMAP_OTG
 
+config OMAP_PACKAGE_ZAF
+       bool
+
+config OMAP_PACKAGE_ZAC
+       bool
+
 config OMAP_PACKAGE_CBC
        bool
 
@@ -35,6 +90,7 @@ comment "OMAP Board Type"
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2
+	default y
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -44,60 +100,75 @@ config MACH_OMAP2_TUSB6010
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_DEVKIT8000
 	bool "DEVKIT8000 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
+	default y
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -112,6 +183,8 @@ config MACH_NOKIA_N810_WIMAX
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	default y
+	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
@@ -119,42 +192,55 @@ config MACH_NOKIA_N8X0
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_IGEP0020
 	bool "IGEP v2 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
+	default y
+	depends on ARCH_OMAP4
+
+config MACH_OMAP4_PANDA
+	bool "OMAP4 Panda Board"
+	default y
 	depends on ARCH_OMAP4
 
 config OMAP3_EMU
@@ -176,3 +262,6 @@ config OMAP3_SDRC_AC_TIMING
 	  wish to say no.  Selecting yes without understanding what is
 	  going on could result in system crashes;
 
+endmenu
+
+endif
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ea52b034e96..63b2d8859c3 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -15,13 +15,14 @@ clock-common				= clock.o clock_common_data.o \
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
@@ -36,6 +37,8 @@ AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 
 # SMS/SDRC
@@ -47,6 +50,7 @@ ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
@@ -89,7 +93,10 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
-obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o
+obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o
+
+iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
+obj-y					+= $(iommu-m) $(iommu-y)
 
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
@@ -105,6 +112,7 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                            hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o
@@ -114,7 +122,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
-					   board-sdp-flash.o
+					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
@@ -123,14 +131,17 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   hsmmc.o
@@ -140,12 +151,16 @@ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
+					   hsmmc.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
 # Platform specific device init code
+usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
+obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 obj-y					+= usb-ehci.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 42f49f785c9..8538e4131d2 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -31,13 +31,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "hsmmc.h"
 
 #define SDP2430_CS0_BASE	0x04000000
@@ -122,11 +122,7 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		board_smc91x_data.gpio_irq = 6;
-	else
-		board_smc91x_data.gpio_irq = 29;
-
+	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
 	gpmc_smc91x_init(&board_smc91x_data);
 }
 
@@ -217,17 +213,30 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
 	.pins[0]	= 3,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
 
+	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
-	omap_usb_init(&sdp2430_usb_config);
+	omap2_usbfs_init(&sdp2430_usb_config);
+
+	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
 	usb_musb_init(&musb_board_data);
+
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index dd9c03171a1..67b95b5f1a2 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -41,7 +41,7 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
-#include <mach/board-sdp.h>
+#include <mach/board-flash.h>
 
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
@@ -667,6 +667,18 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_3430[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
 static struct mtd_partition sdp_nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -797,24 +809,18 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	sdp_flash_init(sdp_flash_partitions);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
 
-static void __init omap_3430sdp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_3430sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 57290fb3fcd..b359c3f7bb3 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -18,10 +18,10 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
+#include <mach/board-flash.h>
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
@@ -66,12 +66,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void __init omap_sdp_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
@@ -93,12 +87,131 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3630 CS organization
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_sdp[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+	{
+		.parts = sdp_nor_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+	},
+	{
+		.parts = sdp_onenand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+	},
+	{
+		.parts = sdp_nand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+	},
+};
+
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
@@ -107,7 +220,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 4bb2c5d151e..9447644774c 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -21,6 +21,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -40,6 +41,54 @@
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
 
+static struct gpio_led sdp4430_gpio_leds[] = {
+	{
+		.name	= "omap4:green:debug0",
+		.gpio	= 61,
+	},
+	{
+		.name	= "omap4:green:debug1",
+		.gpio	= 30,
+	},
+	{
+		.name	= "omap4:green:debug2",
+		.gpio	= 7,
+	},
+	{
+		.name	= "omap4:green:debug3",
+		.gpio	= 8,
+	},
+	{
+		.name	= "omap4:green:debug4",
+		.gpio	= 50,
+	},
+	{
+		.name	= "omap4:blue:user",
+		.gpio	= 169,
+	},
+	{
+		.name	= "omap4:red:user",
+		.gpio	= 170,
+	},
+	{
+		.name	= "omap4:green:user",
+		.gpio	= 139,
+	},
+
+};
+
+static struct gpio_led_platform_data sdp4430_led_data = {
+	.leds	= sdp4430_gpio_leds,
+	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
+};
+
+static struct platform_device sdp4430_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_led_data,
+	},
+};
 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 	{
 		.modalias               = "ks8851",
@@ -112,6 +161,7 @@ static struct platform_device sdp4430_lcd_device = {
 
 static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
+	&sdp4430_leds_gpio,
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -156,14 +206,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -210,6 +262,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -250,7 +304,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
@@ -353,6 +407,11 @@ static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
 		.platform_data = &sdp4430_twldata,
 	},
 };
+static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tmp105", 0x48),
+	},
+};
 static int __init omap4_i2c_init(void)
 {
 	/*
@@ -362,7 +421,8 @@ static int __init omap4_i2c_init(void)
 	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
 			ARRAY_SIZE(sdp4430_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
 	omap_register_i2c_bus(4, 400, NULL, 0);
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 7da92defcde..4d0f5859286 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -461,17 +461,11 @@ static void __init am3517_evm_init(void)
 	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
-static void __init am3517_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= am3517_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bd75642aee6..c6421a72514 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -35,13 +35,14 @@
 
 #include <mach/gpio.h>
 #include <plat/led.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/control.h>
 
+#include "mux.h"
+
 /* LED & Switch macros */
 #define LED0_GPIO13		13
 #define LED1_GPIO14		14
@@ -244,7 +245,7 @@ static inline void __init apollon_init_smc91x(void)
 	apollon_smc91x_resources[0].end   = base + 0x30f;
 	udelay(100);
 
-	omap_cfg_reg(W4__24XX_GPIO74);
+	omap_mux_init_gpio(74, 0);
 	if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
@@ -286,15 +287,15 @@ static void __init omap_apollon_init_irq(void)
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
-	omap_cfg_reg(AA10_242X_GPIO13);
+	omap_mux_init_signal("vlynq_clk.gpio_13", 0);
 	gpio_request(LED0_GPIO13, "LED0");
 	gpio_direction_output(LED0_GPIO13, 0);
 	/* LED1  - AA6 */
-	omap_cfg_reg(AA6_242X_GPIO14);
+	omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
 	gpio_request(LED1_GPIO14, "LED1");
 	gpio_direction_output(LED1_GPIO14, 0);
 	/* LED2  - AA4 */
-	omap_cfg_reg(AA4_242X_GPIO15);
+	omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
 	gpio_request(LED2_GPIO15, "LED2");
 	gpio_direction_output(LED2_GPIO15, 0);
 }
@@ -303,22 +304,35 @@ static void __init apollon_usb_init(void)
 {
 	/* USB device */
 	/* DEVICE_SUSPEND */
-	omap_cfg_reg(P21_242X_GPIO12);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
-	omap_usb_init(&apollon_usb_config);
+	omap2_usbfs_init(&apollon_usb_config);
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_apollon_init(void)
 {
 	u32 v;
 
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	apollon_led_init();
 	apollon_flash_init();
 	apollon_usb_init();
 
 	/* REVISIT: where's the correct place */
-	omap_cfg_reg(W19_24XX_SYS_NIRQ);
+	omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
+
+	/* LCD PWR_EN */
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
 	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index bc4c3f80706..e10bc109415 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -61,8 +61,6 @@
 #define SB_T35_SMSC911X_GPIO	65
 
 #define NAND_BLOCK_SIZE		SZ_128K
-#define GPMC_CS0_BASE		0x60
-#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
@@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
 	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
-	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
-	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
 
 };
 
-static struct resource cm_t35_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cm_t35_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &cm_t35_nand_resource,
-	.dev		= {
-		.platform_data	= &cm_t35_nand_data,
-	},
-};
-
 static void __init cm_t35_init_nand(void)
 {
-	if (platform_device_register(&cm_t35_nand_device) < 0)
+	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
 		pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else
@@ -708,12 +690,6 @@ static void __init cm_t35_init_irq(void)
 	omap_gpio_init();
 }
 
-static void __init cm_t35_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
 	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -836,7 +812,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= cm_t35_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 922b7464807..a07086d6a0b 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -33,6 +33,7 @@
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,9 +59,6 @@
 #include "mux.h"
 #include "hsmmc.h"
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource devkit8000_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &devkit8000_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &devkit8000_nand_resource,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = {
 	},
 	{}	/* Terminator */
 };
-static struct omap_board_config_kernel devkit8000_config[] __initdata = {
-};
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
 	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
 
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
+
 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
-{
+static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-	return 0;
-}
-
-static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply devkit8000_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi2.0");
 
 static struct omap_dss_device devkit8000_lcd_device = {
 	.name                   = "lcd",
-	.driver_name            = "innolux_at_panel",
+	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
@@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = {
 	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
@@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = {
 	.driver_name            = "venc",
 	.type                   = OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable        = devkit8000_panel_enable_tv,
-	.platform_disable       = devkit8000_panel_disable_tv,
 };
 
 
@@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = {
 	},
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
-	.supply = "vdda_dac",
-	.dev	= &devkit8000_dss_device.dev,
-};
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* link regulators to MMC adapters */
 	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+        /* gpio + 1 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + 1;
+	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+
+	/* gpio + 7 is "DVI_PD" (out, active low) */
+	devkit8000_dvi_device.reset_gpio = gpio + 7;
+	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
 
 	return 0;
 }
@@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
-	{
-	.supply		= "vdvi",
-	.dev		= &devkit8000_lcd_device.dev,
-	},
-	{
-	.supply		= "vdds_dsi",
-	.dev		= &devkit8000_dss_device.dev,
-	}
-};
+static struct regulator_consumer_supply devkit8000_vpll1_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 	.consumer_supplies	= &devkit8000_vmmc1_supply,
 };
 
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data devkit8000_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vsim_supply,
-};
-
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
 static struct regulator_init_data devkit8000_vdac = {
 	.constraints = {
@@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = {
 	.consumer_supplies	= &devkit8000_vdda_dac_supply,
 };
 
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
@@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
-	.consumer_supplies	= devkit8000_vpll2_supplies,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vpll1_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.apply_uV               = true,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+			| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+			| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &devkit8000_vio_supply,
 };
 
 static struct twl4030_usb_data devkit8000_usb_data = {
@@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = {
 	.gpio		= &devkit8000_gpio_data,
 	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vsim		= &devkit8000_vsim,
 	.vdac		= &devkit8000_vdac,
-	.vpll2		= &devkit8000_vpll2,
+	.vpll1		= &devkit8000_vpll1,
+	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
 };
 
 static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65930", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &devkit8000_twldata,
@@ -464,8 +446,6 @@ static struct platform_device keys_gpio = {
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = {
 
 static void __init omap_dm9000_init(void)
 {
+	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
+	struct omap_die_id odi;
+
 	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
 			OMAP_DM9000_GPIO_IRQ);
@@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void)
 		}
 
 	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+
+	/* init the mac address using DIE id */
+	omap_get_die_id(&odi);
+
+	eth_addr[0] = 0x02; /* locally administered */
+	eth_addr[1] = odi.id_1 & 0xff;
+	eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
+	eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
+	eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
+	eth_addr[5] = (odi.id_0 & 0x000000ff);
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
@@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		devkit8000_nand_data.cs = nandcs;
-		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		devkit8000_nand_data.gpmc_baseaddr = (void *)
-			(gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&devkit8000_nand_device) < 0)
+		if (gpmc_nand_init(&devkit8000_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -797,8 +784,6 @@ static void __init devkit8000_init(void)
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
@@ -814,17 +799,11 @@ static void __init devkit8000_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init devkit8000_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= devkit8000_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-flash.c
index 2d026328e38..ac834aa7abf 100644
--- a/arch/arm/mach-omap2/board-sdp-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -21,7 +21,7 @@
 #include <plat/nand.h>
 #include <plat/onenand.h>
 #include <plat/tc.h>
-#include <mach/board-sdp.h>
+#include <mach/board-flash.h>
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
@@ -29,72 +29,53 @@
 
 #define DEBUG_BASE		0x08000000 /* debug board */
 
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
 /* various memory sizes */
 #define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
 #define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
 
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- *
- * REVISIT: Add support for 2430 SDP
- */
-static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct physmap_flash_data sdp_nor_data = {
+static struct physmap_flash_data board_nor_data = {
 	.width		= 2,
 };
 
-static struct resource sdp_nor_resource = {
+static struct resource board_nor_resource = {
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device sdp_nor_device = {
+static struct platform_device board_nor_device = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-			.platform_data = &sdp_nor_data,
+			.platform_data = &board_nor_data,
 	},
 	.num_resources	= 1,
-	.resource	= &sdp_nor_resource,
+	.resource	= &board_nor_resource,
 };
 
 static void
-__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
+__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 	int err;
 
-	sdp_nor_data.parts	= sdp_nor_parts.parts;
-	sdp_nor_data.nr_parts	= sdp_nor_parts.nr_parts;
+	board_nor_data.parts	= nor_parts;
+	board_nor_data.nr_parts	= nr_parts;
 
 	/* Configure start address and size of NOR device */
 	if (omap_rev() >= OMAP3430_REV_ES1_0) {
 		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
 					+ FLASH_SIZE_SDPV2 - 1;
 	} else {
 		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
 					+ FLASH_SIZE_SDPV1 - 1;
 	}
 	if (err < 0) {
 		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
 		return;
 	}
-	if (platform_device_register(&sdp_nor_device) < 0)
+	if (platform_device_register(&board_nor_device) < 0)
 		printk(KERN_ERR	"Unable to register NOR device\n");
 }
 
@@ -105,17 +86,18 @@ static struct omap_onenand_platform_data board_onenand_data = {
 };
 
 static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+__init board_onenand_init(struct mtd_partition *onenand_parts,
+				u8 nr_parts, u8 cs)
 {
 	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= sdp_onenand_parts.parts;
-	board_onenand_data.nr_parts	= sdp_onenand_parts.nr_parts;
+	board_onenand_data.parts	= onenand_parts;
+	board_onenand_data.nr_parts	= nr_parts;
 
 	gpmc_onenand_init(&board_onenand_data);
 }
 #else
 static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 }
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
@@ -147,7 +129,7 @@ static struct gpmc_timings nand_timings = {
 	.wr_data_mux_bus = 0,
 };
 
-static struct omap_nand_platform_data sdp_nand_data = {
+static struct omap_nand_platform_data board_nand_data = {
 	.nand_setup	= NULL,
 	.gpmc_t		= &nand_timings,
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
@@ -155,23 +137,18 @@ static struct omap_nand_platform_data sdp_nand_data = {
 	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
 };
 
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
 {
-	sdp_nand_data.cs		= cs;
-	sdp_nand_data.parts		= sdp_nand_parts.parts;
-	sdp_nand_data.nr_parts		= sdp_nand_parts.nr_parts;
+	board_nand_data.cs		= cs;
+	board_nand_data.parts		= nand_parts;
+	board_nand_data.nr_parts		= nr_parts;
 
-	sdp_nand_data.gpmc_cs_baseaddr	= (void *)(OMAP34XX_GPMC_VIRT +
-							GPMC_CS0_BASE +
-							cs * GPMC_CS_SIZE);
-	sdp_nand_data.gpmc_baseaddr	 = (void *) (OMAP34XX_GPMC_VIRT);
-
-	gpmc_nand_init(&sdp_nand_data);
+	gpmc_nand_init(&board_nand_data);
 }
 #else
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
 {
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -215,7 +192,8 @@ unmap:
  *
  * @return - void.
  */
-void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
+void board_flash_init(struct flash_partitions partition_info[],
+					char chip_sel_board[][GPMC_CS_NUM])
 {
 	u8		cs = 0;
 	u8		norcs = GPMC_CS_NUM + 1;
@@ -232,7 +210,7 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
 		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
 		return;
 	}
-	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+	config_sel = (unsigned char *)(chip_sel_board[idx]);
 
 	while (cs < GPMC_CS_NUM) {
 		switch (config_sel[cs]) {
@@ -256,17 +234,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
 		printk(KERN_INFO "NOR: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_nor_init(sdp_partition_info[0], norcs);
+		board_nor_init(partition_info[0].parts,
+				partition_info[0].nr_parts, norcs);
 
 	if (onenandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "OneNAND: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_onenand_init(sdp_partition_info[1], onenandcs);
+		board_onenand_init(partition_info[1].parts,
+					partition_info[1].nr_parts, onenandcs);
 
 	if (nandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "NAND: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_nand_init(sdp_partition_info[2], nandcs);
+		board_nand_init(partition_info[2].parts,
+				partition_info[2].nr_parts, nandcs);
 }
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9242902d3a4..3482b99e8c8 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 16703fdb351..e09bd686389 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,7 +33,6 @@
 
 #include <plat/control.h>
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
@@ -42,6 +41,8 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 
+#include "mux.h"
+
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
@@ -246,7 +247,7 @@ static inline void __init h4_init_debug(void)
 
 	udelay(100);
 
-	omap_cfg_reg(M15_24XX_GPIO92);
+	omap_mux_init_gpio(92, 0);
 	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
@@ -272,27 +273,6 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 };
 
 static struct omap_usb_config h4_usb_config __initdata = {
-#ifdef	CONFIG_MACH_OMAP2_H4_USB1
-	/* NOTE:  usb1 could also be used with 3 wire signaling */
-	.pins[1]	= 4,
-#endif
-
-#ifdef	CONFIG_MACH_OMAP_H4_OTG
-	/* S1.10 ON -- USB OTG port
-	 * usb0 switched to Mini-AB port and isp1301 transceiver;
-	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
-	 */
-	.otg		= 1,
-	.pins[0]	= 4,
-#ifdef	CONFIG_USB_GADGET_OMAP
-	/* use OTG cable, or standard A-to-MiniB */
-	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
-#endif	/* XX */
-
-#else
 	/* S1.10 OFF -- usb "download port"
 	 * usb0 switched to Mini-B port and isp1105 transceiver;
 	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
@@ -301,7 +281,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.pins[0]	= 3,
 /*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
-#endif
 };
 
 static struct omap_board_config_kernel h4_config[] = {
@@ -338,31 +317,54 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 	},
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_h4_init(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_cfg_reg(K15_24XX_UART3_TX);
-	omap_cfg_reg(K14_24XX_UART3_RX);
-#endif
 
 #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
 		row_gpios[5] = 0;
 		col_gpios[2] = 15;
 		col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
 	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
 #endif
 
 	i2c_register_board_info(1, h4_i2c_board_info,
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_usb_init(&h4_usb_config);
+	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
 }
 
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 759e39d1a70..175f0433976 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -532,17 +532,11 @@ static void __init igep2_init(void)
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
-static void __init igep2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(IGEP0020, "IGEP v2 board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= igep2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 9cd2669113e..00d9b13b01c 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -38,6 +38,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
+#include <mach/board-zoom.h>
 
 #include <asm/delay.h>
 #include <plat/control.h>
@@ -388,6 +389,38 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct mtd_partition ldp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "File System - NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
+	},
+
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -400,23 +433,19 @@ static void __init omap_ldp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
+	board_nand_init(ldp_nand_partitions,
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
-static void __init omap_ldp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_ldp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 2565ff08a22..a3e2b49aa39 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -33,6 +33,8 @@
 #include <plat/mmc.h>
 #include <plat/serial.h>
 
+#include "mux.h"
+
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
@@ -649,8 +651,17 @@ static void __init n8x0_init_irq(void)
 	omap_gpio_init();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init n8x0_init_machine(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 	/* FIXME: add n810 spi devices */
 	spi_register_board_info(n800_spi_board_info,
 				ARRAY_SIZE(n800_spi_board_info));
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 0ab0c26db4d..87969c7df65 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -48,9 +48,6 @@
 #include "mux.h"
 #include "hsmmc.h"
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 static struct mtd_partition omap3beagle_nand_partitions[] = {
@@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3beagle_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3beagle_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3beagle_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3beagle_nand_resource,
-};
-
 /* DSS */
 
 static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3beagle_nand_data.cs = nandcs;
-		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3beagle_nand_device) < 0)
+		if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -507,18 +485,12 @@ static void __init omap3_beagle_init(void)
 	beagle_display_init();
 }
 
-static void __init omap3_beagle_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_beagle_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index a3d2e285e11..f76d9c0a47a 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -514,14 +514,11 @@ static struct regulator_init_data omap3_evm_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
-	.supply		= "vdvi",
-	.dev		= &omap3_evm_lcd_device.dev,
-};
+static struct regulator_consumer_supply omap3_evm_vpll2_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 static struct regulator_init_data omap3_evm_vpll2 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.apply_uV		= true,
@@ -715,18 +712,12 @@ static void __init omap3_evm_init(void)
 	omap3_evm_display_init();
 }
 
-static void __init omap3_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index c0f4f12eba5..55836fa3506 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -25,6 +25,9 @@
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/spi/wl12xx.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
@@ -41,15 +44,49 @@
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/nand.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
-/* hardware debounce: (value + 1) * 31us */
-#define GPIO_DEBOUNCE_TIME		127
+#define NAND_BLOCK_SIZE			SZ_128K
+
+static struct mtd_partition omap3pandora_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	}, {
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 15 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "uboot-env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 1 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 80 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data pandora_nand_data = {
+	.cs		= 0,
+	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.parts		= omap3pandora_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
+};
 
 static struct gpio_led pandora_gpio_leds[] = {
 	{
@@ -88,6 +125,7 @@ static struct platform_device pandora_leds_gpio = {
 	.type		= ev_type,				\
 	.code		= ev_code,				\
 	.active_low	= act_low,				\
+	.debounce_interval = 4,					\
 	.desc		= "btn " descr,				\
 }
 
@@ -99,14 +137,14 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
-	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
-	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
-	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
-	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
+	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
+	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
+	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
+	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
 	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
 	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
 	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
@@ -127,14 +165,7 @@ static struct platform_device pandora_keys_gpio = {
 	},
 };
 
-static void __init pandora_keys_gpio_init(void)
-{
-	/* set debounce time for GPIO banks 4 and 6 */
-	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
-	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
-}
-
-static int board_keymap[] = {
+static const uint32_t board_keymap[] = {
 	/* row, col, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_8),
@@ -255,12 +286,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret, gpio_32khz;
+
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(omap3pandora_mmc);
 
+	/* gpio + 13 drives 32kHz buffer for wifi module */
+	gpio_32khz = gpio + 13;
+	ret = gpio_request(gpio_32khz, "wifi 32kHz");
+	if (ret < 0) {
+		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail;
+	}
+
+	ret = gpio_direction_output(gpio_32khz, 1);
+	if (ret < 0) {
+		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail_direction;
+	}
+
 	return 0;
+
+fail_direction:
+	gpio_free(gpio_32khz);
+fail:
+	return -ENODEV;
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -539,10 +591,67 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
+static void pandora_wl1251_set_power(bool enable)
+{
+	/*
+	 * Keep power always on until wl1251_sdio driver learns to re-init
+	 * the chip after powering it down and back up.
+	 */
+}
+
+static struct wl12xx_platform_data pandora_wl1251_pdata = {
+	.set_power	= pandora_wl1251_set_power,
+	.use_eeprom	= true,
+};
+
+static struct platform_device pandora_wl1251_data = {
+	.name           = "wl1251_data",
+	.id             = -1,
+	.dev		= {
+		.platform_data	= &pandora_wl1251_pdata,
+	},
+};
+
+static void pandora_wl1251_init(void)
+{
+	int ret;
+
+	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
+	if (ret < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset");
+	if (ret < 0)
+		goto fail_irq;
+
+	/* start powered so that it probes with MMC subsystem */
+	ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1);
+	if (ret < 0)
+		goto fail_nreset;
+
+	return;
+
+fail_nreset:
+	gpio_free(PANDORA_WIFI_NRESET_GPIO);
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
+	&pandora_wl1251_data,
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -575,6 +684,7 @@ static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
+	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_serial_init();
@@ -582,25 +692,19 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
-	pandora_keys_gpio_init();
 	usb_musb_init(&musb_board_data);
+	gpmc_nand_init(&pandora_nand_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3pandora_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3pandora_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index a04cffd691c..bcd01d278c6 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -652,18 +652,12 @@ static void __init omap3_stalker_init(void)
 	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_stalker_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.phys_io		= 0x48000000,
 	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
-	.map_io			= omap3_stalker_map_io,
+	.map_io			= omap3_map_io,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index f05b867c585..663c62d271e 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -54,9 +54,6 @@
 
 #include <asm/setup.h>
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP3_AC_GPIO		136
@@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3touchbook_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3touchbook_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3touchbook_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3touchbook_nand_resource,
-};
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -458,8 +441,6 @@ static void __init omap3touchbook_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -481,13 +462,9 @@ static void __init omap3touchbook_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3touchbook_nand_data.cs = nandcs;
-		omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3touchbook_nand_data.gpmc_baseaddr =
-						(void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3touchbook_nand_device) < 0)
+		if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -559,18 +536,12 @@ static void __init omap3_touchbook_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_touchbook_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_touchbook_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
new file mode 100644
index 00000000000..c03d1d56db5
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -0,0 +1,304 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+
+static void __init omap4_panda_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.1",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0)
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data omap4_panda_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_panda_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 2,
+	.consumer_supplies      = omap4_panda_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_panda_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &omap4_panda_vmmc,
+	.vpp		= &omap4_panda_vpp,
+	.vusim		= &omap4_panda_vusim,
+	.vana		= &omap4_panda_vana,
+	.vcxio		= &omap4_panda_vcxio,
+	.vdac		= &omap4_panda_vdac,
+	.vusb		= &omap4_panda_vusb,
+	.vaux1		= &omap4_panda_vaux1,
+	.vaux2		= &omap4_panda_vaux2,
+	.vaux3		= &omap4_panda_vaux3,
+};
+
+static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &omap4_panda_twldata,
+	},
+};
+static int __init omap4_panda_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
+			ARRAY_SIZE(omap4_panda_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
+static void __init omap4_panda_init(void)
+{
+	int status;
+
+	omap4_panda_i2c_init();
+	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
+	usb_nop_xceiv_register();
+	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+	if (!cpu_is_omap44xx())
+		usb_musb_init(&musb_board_data);
+}
+
+static void __init omap4_panda_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
+
+MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
+	/* Maintainer: David Anders - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap4_panda_map_io,
+	.init_irq	= omap4_panda_init_irq,
+	.init_machine	= omap4_panda_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 87acb2f198e..4c484361835 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -58,8 +58,6 @@
 #define OVERO_GPIO_USBH_NRESET	183
 
 #define NAND_BLOCK_SIZE SZ_128K
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
@@ -166,9 +164,26 @@ static struct platform_device overo_smsc911x_device = {
 	},
 };
 
+static struct platform_device overo_smsc911x2_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(overo_smsc911x2_resources),
+	.resource	= overo_smsc911x2_resources,
+	.dev		= {
+		.platform_data = &overo_smsc911x_config,
+	},
+};
+
+static struct platform_device *smsc911x_devices[] = {
+	&overo_smsc911x_device,
+	&overo_smsc911x2_device,
+};
+
 static inline void __init overo_init_smsc911x(void)
 {
-	unsigned long cs_mem_base;
+	unsigned long cs_mem_base, cs_mem_base2;
+
+	/* set up first smsc911x chip */
 
 	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
@@ -189,7 +204,28 @@ static inline void __init overo_init_smsc911x(void)
 	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
 	overo_smsc911x_resources[1].end	  = 0;
 
-	platform_device_register(&overo_smsc911x_device);
+	/* set up second smsc911x chip */
+
+	if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) {
+		printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0;
+	overo_smsc911x2_resources[0].end   = cs_mem_base2 + 0xff;
+
+	if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) &&
+	    (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) {
+		gpio_export(OVERO_SMSC911X2_GPIO, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO);
+	overo_smsc911x2_resources[1].end   = 0;
+
+	platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices));
 }
 
 #else
@@ -231,28 +267,11 @@ static struct omap_nand_platform_data overo_nand_data = {
 	.dma_channel = -1,	/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource overo_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device overo_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &overo_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &overo_nand_resource,
-};
-
-
 static void __init overo_flash_init(void)
 {
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -274,12 +293,9 @@ static void __init overo_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		overo_nand_data.cs = nandcs;
-		overo_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&overo_nand_device) < 0)
+		if (gpmc_nand_init(&overo_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -484,17 +500,11 @@ static void __init overo_init(void)
 					"OVERO_GPIO_USBH_CPEN\n");
 }
 
-static void __init overo_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= overo_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 03483920ed6..9a5eb87425f 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -25,7 +25,6 @@
 #include <linux/mmc/host.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/dma.h>
@@ -33,6 +32,11 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <sound/tlv320aic3x.h>
+#include <sound/tpa6130a2-plat.h>
+
+#include <../drivers/staging/iio/light/tsl2563.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
@@ -51,6 +55,12 @@ enum {
 
 static struct wl12xx_platform_data wl1251_pdata;
 
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
+	.cover_comp_gain = 16,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,
@@ -311,48 +321,29 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.0",
-};
+static struct regulator_consumer_supply rx51_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-static struct regulator_consumer_supply rx51_vaux3_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vaux3_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
 
-static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply   = "vmmc_aux",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vsim_supply =
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
-	{
-		.supply		= "AVDD",
-		.dev_name	= "2-0018",
-	},
-	{
-		.supply		= "DRVDD",
-		.dev_name	= "2-0018",
-	},
+	REGULATOR_SUPPLY("AVDD", "2-0018"),
+	REGULATOR_SUPPLY("DRVDD", "2-0018"),
+	/* tpa6130a2 */
+	REGULATOR_SUPPLY("Vdd", "2-0060"),
 	/* Keep vmmc as last item. It is not iterated for newer boards */
-	{
-		.supply		= "vmmc",
-		.dev_name	= "mmci-omap-hs.1",
-	},
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
 };
 
 static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	/* tlv320aic3x digital supplies */
-	{
-		.supply		= "IOVDD",
-		.dev_name	= "2-0018"
-	},
-	{
-		.supply		= "DVDD",
-		.dev_name	= "2-0018"
-	},
+	REGULATOR_SUPPLY("IOVDD", "2-0018"),
+	REGULATOR_SUPPLY("DVDD", "2-0018"),
 };
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -373,6 +364,7 @@ static struct regulator_init_data rx51_vaux1 = {
 		.name			= "V28",
 		.min_uV			= 2800000,
 		.max_uV			= 2800000,
+		.always_on		= true, /* due battery cover sensor */
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
@@ -718,6 +710,15 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vio			= &rx51_vio,
 };
 
+static struct aic3x_pdata rx51_aic3x_data __initdata = {
+	.gpio_reset		= 60,
+};
+
+static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
+	.id			= TPA6130A2,
+	.power_gpio		= 98,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	{
 		I2C_BOARD_INFO("twl5030", 0x48),
@@ -730,7 +731,18 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+		.platform_data = &rx51_aic3x_data,
+	},
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+	{
+		I2C_BOARD_INFO("tsl2563", 0x29),
+		.platform_data = &rx51_tsl2563_platform_data,
 	},
+#endif
+	{
+		I2C_BOARD_INFO("tpa6130a2", 0x60),
+		.platform_data = &rx51_tpa6130a2_data,
+	}
 };
 
 static int __init rx51_i2c_init(void)
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index b743a4f4264..5a1005ba981 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 
 #include <asm/mach-types.h>
-#include <plat/mux.h>
 #include <plat/display.h>
 #include <plat/vram.h>
 #include <plat/mcspi.h>
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 3bd956f9e19..a58e8cb1a7f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -143,7 +143,7 @@ static void __init rx51_init(void)
 
 static void __init rx51_map_io(void)
 {
-	omap2_set_globals_343x();
+	omap2_set_globals_3xxx();
 	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index ffe188cb18e..3ad9ecf7f5e 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -71,30 +71,80 @@ static struct twl4030_platform_data zoom2_twldata = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
 #define board_mux	NULL
 #endif
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 }
 
-static void __init omap_zoom2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 5b605eba3e7..6ca0b834161 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -25,15 +25,50 @@
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static void __init omap_zoom_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel zoom_config[] __initdata = {
 };
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom_init_irq(void)
 {
 	omap_board_config = zoom_config;
@@ -46,6 +81,19 @@ static void __init omap_zoom_init_irq(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -66,6 +114,8 @@ static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 
 	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
@@ -76,7 +126,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index d33744117ce..138646deac8 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -1408,7 +1408,7 @@ static struct clk ts_fck = {
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
index 2d83565d2be..721c3b66740 100644
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
@@ -50,15 +50,15 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 
 	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
 
+	mask = 1 << idlest_shift;
+
 	if (cpu_is_omap24xx())
-		ena = idlest_shift;
+		ena = mask;
 	else if (cpu_is_omap34xx())
 		ena = 0;
 	else
 		BUG();
 
-	mask = 1 << idlest_shift;
-
 	/* XXX should be OMAP2 CM */
 	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
 			  MAX_MODULE_READY_TIME, i);
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 03e6c9ed82a..2dbb265bedd 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,6 @@
 #include <plat/control.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
@@ -153,10 +152,12 @@ static struct resource omap2_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 	{
 		.start		= INT_24XX_MAIL_U3_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "iva",
 	},
 };
 static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
@@ -175,6 +176,7 @@ static struct resource omap3_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 };
 static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
@@ -196,6 +198,7 @@ static struct resource omap4_mbox_resources[] = {
 	{
 		.start          = OMAP44XX_IRQ_MAIL_U0,
 		.flags          = IORESOURCE_IRQ,
+		.name		= "mbox",
 	},
 };
 static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
@@ -205,7 +208,7 @@ static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
 #endif
 
 static struct platform_device mbox_device = {
-	.name		= "omap2-mailbox",
+	.name		= "omap-mailbox",
 	.id		= -1,
 };
 
@@ -230,64 +233,7 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif /* CONFIG_OMAP_MBOX_FWK */
 
-#if defined(CONFIG_OMAP_STI)
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#define OMAP2_STI_BASE		0x48068000
-#define OMAP2_STI_CHANNEL_BASE	0x54000000
-#define OMAP2_STI_IRQ		4
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP2_STI_BASE,
-		.end		= OMAP2_STI_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_CHANNEL_BASE,
-		.end		= OMAP2_STI_CHANNEL_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-#elif defined(CONFIG_ARCH_OMAP3)
-
-#define OMAP3_SDTI_BASE		0x54500000
-#define OMAP3_SDTI_CHANNEL_BASE	0x54600000
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP3_SDTI_BASE,
-		.end		= OMAP3_SDTI_BASE + 0xFFF,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3_SDTI_CHANNEL_BASE,
-		.end		= OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-#endif
-
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
-	platform_device_register(&sti_device);
-}
-#else
 static inline void omap_init_sti(void) {}
-#endif
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
@@ -672,19 +618,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 					OMAP_PIN_INPUT_PULLUP);
 
 	if (cpu_is_omap2420() && controller_nr == 0) {
-		omap_cfg_reg(H18_24XX_MMC_CMD);
-		omap_cfg_reg(H15_24XX_MMC_CLKI);
-		omap_cfg_reg(G19_24XX_MMC_CLKO);
-		omap_cfg_reg(F20_24XX_MMC_DAT0);
-		omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
-		omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+		omap_mux_init_signal("sdmmc_cmd", 0);
+		omap_mux_init_signal("sdmmc_clki", 0);
+		omap_mux_init_signal("sdmmc_clko", 0);
+		omap_mux_init_signal("sdmmc_dat0", 0);
+		omap_mux_init_signal("sdmmc_dat_dir0", 0);
+		omap_mux_init_signal("sdmmc_cmd_dir", 0);
 		if (mmc_controller->slots[0].wires == 4) {
-			omap_cfg_reg(H14_24XX_MMC_DAT1);
-			omap_cfg_reg(E19_24XX_MMC_DAT2);
-			omap_cfg_reg(D19_24XX_MMC_DAT3);
-			omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
-			omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
-			omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+			omap_mux_init_signal("sdmmc_dat1", 0);
+			omap_mux_init_signal("sdmmc_dat2", 0);
+			omap_mux_init_signal("sdmmc_dat3", 0);
+			omap_mux_init_signal("sdmmc_dat_dir1", 0);
+			omap_mux_init_signal("sdmmc_dat_dir2", 0);
+			omap_mux_init_signal("sdmmc_dat_dir3", 0);
 		}
 
 		/*
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index e57fb29ff85..72220960192 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -19,8 +19,6 @@
 #include <plat/board.h>
 #include <plat/gpmc.h>
 
-#define WR_RD_PIN_MONITORING	0x00600000
-
 static struct omap_nand_platform_data *gpmc_nand_data;
 
 static struct resource gpmc_nand_resource = {
@@ -71,10 +69,10 @@ static int omap2_nand_gpmc_retime(void)
 	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
-	gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
-			GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
-			GPMC_CONFIG1_DEVICETYPE_NAND);
-
+	gpmc_cs_configure(gpmc_nand_data->cs,
+				GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize);
+	gpmc_cs_configure(gpmc_nand_data->cs,
+			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -82,27 +80,13 @@ static int omap2_nand_gpmc_retime(void)
 	return 0;
 }
 
-static int gpmc_nand_setup(void)
-{
-	struct device *dev = &gpmc_nand_device.dev;
-
-	/* Set timings in GPMC */
-	if (omap2_nand_gpmc_retime() < 0) {
-		dev_err(dev, "Unable to set gpmc timings\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 {
-	unsigned int val;
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
 
 	gpmc_nand_data = _nand_data;
-	gpmc_nand_data->nand_setup = gpmc_nand_setup;
+	gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -112,19 +96,16 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 		return err;
 	}
 
-	err = gpmc_nand_setup();
+	 /* Set timings in GPMC */
+	err = omap2_nand_gpmc_retime();
 	if (err < 0) {
-		dev_err(dev, "NAND platform setup failed: %d\n", err);
+		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 		return err;
 	}
 
 	/* Enable RD PIN Monitoring Reg */
 	if (gpmc_nand_data->dev_ready) {
-		val  = gpmc_cs_read_reg(gpmc_nand_data->cs,
-						 GPMC_CS_CONFIG1);
-		val |= WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(gpmc_nand_data->cs,
-						GPMC_CS_CONFIG1, val);
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}
 
 	err = platform_device_register(&gpmc_nand_device);
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5bc3ca03551..f46933bc937 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -46,8 +46,9 @@
 #define GPMC_ECC_CONFIG		0x1f4
 #define GPMC_ECC_CONTROL	0x1f8
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
+#define GPMC_ECC1_RESULT        0x200
 
-#define GPMC_CS0		0x60
+#define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
 
 #define GPMC_MEM_START		0x00000000
@@ -92,7 +93,8 @@ struct omap3_gpmc_regs {
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned		gpmc_cs_map;
+static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
+static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
 
 static void __iomem *gpmc_base;
 
@@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx)
 	return __raw_readl(gpmc_base + idx);
 }
 
+static void gpmc_cs_write_byte(int cs, int idx, u8 val)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	__raw_writeb(val, reg_addr);
+}
+
+static u8 gpmc_cs_read_byte(int cs, int idx)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	return __raw_readb(reg_addr);
+}
+
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	__raw_writel(val, reg_addr);
 }
 
@@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	return __raw_readl(reg_addr);
 }
 
@@ -419,8 +437,157 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 
 /**
+ * gpmc_read_status - read access request to get the different gpmc status
+ * @cmd: command type
+ * @return status
+ */
+int gpmc_read_status(int cmd)
+{
+	int	status = -EINVAL;
+	u32	regval = 0;
+
+	switch (cmd) {
+	case GPMC_GET_IRQ_STATUS:
+		status = gpmc_read_reg(GPMC_IRQSTATUS);
+		break;
+
+	case GPMC_PREFETCH_FIFO_CNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
+		break;
+
+	case GPMC_PREFETCH_COUNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_COUNT(regval);
+		break;
+
+	case GPMC_STATUS_BUFFER:
+		regval = gpmc_read_reg(GPMC_STATUS);
+		/* 1 : buffer is available to write */
+		status = regval & GPMC_STATUS_BUFF_EMPTY;
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_status: Not supported\n");
+	}
+	return status;
+}
+EXPORT_SYMBOL(gpmc_read_status);
+
+/**
+ * gpmc_cs_configure - write request to configure gpmc
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ * @return status of the operation
+ */
+int gpmc_cs_configure(int cs, int cmd, int wval)
+{
+	int err = 0;
+	u32 regval = 0;
+
+	switch (cmd) {
+	case GPMC_SET_IRQ_STATUS:
+		gpmc_write_reg(GPMC_IRQSTATUS, wval);
+		break;
+
+	case GPMC_CONFIG_WP:
+		regval = gpmc_read_reg(GPMC_CONFIG);
+		if (wval)
+			regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
+		else
+			regval |= GPMC_CONFIG_WRITEPROTECT;  /* WP is OFF */
+		gpmc_write_reg(GPMC_CONFIG, regval);
+		break;
+
+	case GPMC_CONFIG_RDY_BSY:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		if (wval)
+			regval |= WR_RD_PIN_MONITORING;
+		else
+			regval &= ~WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_SIZE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_TYPE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICETYPE(wval);
+		if (wval == GPMC_DEVICETYPE_NOR)
+			regval |= GPMC_CONFIG1_MUXADDDATA;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
+		err = -EINVAL;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(gpmc_cs_configure);
+
+/**
+ * gpmc_nand_read - nand specific read access request
+ * @cs: chip select number
+ * @cmd: command type
+ */
+int gpmc_nand_read(int cs, int cmd)
+{
+	int rval = -EINVAL;
+
+	switch (cmd) {
+	case GPMC_NAND_DATA:
+		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
+	}
+	return rval;
+}
+EXPORT_SYMBOL(gpmc_nand_read);
+
+/**
+ * gpmc_nand_write - nand specific write request
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ */
+int gpmc_nand_write(int cs, int cmd, int wval)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case GPMC_NAND_COMMAND:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
+		break;
+
+	case GPMC_NAND_ADDRESS:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
+		break;
+
+	case GPMC_NAND_DATA:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
+
+	default:
+		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
+		err = -EINVAL;
+	}
+	return err;
+}
+EXPORT_SYMBOL(gpmc_nand_write);
+
+
+
+/**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: nand cs (chip select) number
+ * @cs: cs (chip select) number
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
@@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free);
 int gpmc_prefetch_enable(int cs, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
-	uint32_t prefetch_config1;
 
 	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
@@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		/* Set dma/mpu mode, the prefetch read / post write and
 		 * enable the engine. Set which cs is has requested for.
 		 */
-		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
 					PREFETCH_FIFOTHRESHOLD |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write));
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+					(0x1 & is_write)));
+
+		/*  Start the prefetch engine */
+		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 	} else {
 		return -EBUSY;
 	}
-	/*  Start the prefetch engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 
 	return 0;
 }
@@ -456,24 +622,24 @@ EXPORT_SYMBOL(gpmc_prefetch_enable);
 /**
  * gpmc_prefetch_reset - disables and stops the prefetch engine
  */
-void gpmc_prefetch_reset(void)
+int gpmc_prefetch_reset(int cs)
 {
+	u32 config1;
+
+	/* check if the same module/cs is trying to reset */
+	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
+		return -EINVAL;
+
 	/* Stop the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
 
 	/* Reset/disable the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
 
-/**
- * gpmc_prefetch_status - reads prefetch status of engine
- */
-int  gpmc_prefetch_status(void)
-{
-	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+	return 0;
 }
-EXPORT_SYMBOL(gpmc_prefetch_status);
+EXPORT_SYMBOL(gpmc_prefetch_reset);
 
 static void __init gpmc_mem_init(void)
 {
@@ -615,3 +781,79 @@ void omap3_gpmc_restore_context(void)
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
+
+/**
+ * gpmc_enable_hwecc - enable hardware ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @ecc_size: bytes for which ECC will be generated
+ */
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
+{
+	unsigned int val;
+
+	/* check if ecc module is in used */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	gpmc_ecc_used = cs;
+
+	/* clear ecc and enable bits */
+	val = ((0x00000001<<8) | 0x00000001);
+	gpmc_write_reg(GPMC_ECC_CONTROL, val);
+
+	/* program ecc and result sizes */
+	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
+	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
+
+	switch (mode) {
+	case GPMC_ECC_READ:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	case GPMC_ECC_READSYN:
+		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
+		break;
+	case GPMC_ECC_WRITE:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	default:
+		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
+		break;
+	}
+
+	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+	val = (dev_width << 7) | (cs << 1) | (0x1);
+	gpmc_write_reg(GPMC_ECC_CONFIG, val);
+	return 0;
+}
+
+/**
+ * gpmc_calculate_ecc - generate non-inverted ecc bytes
+ * @cs: chip select number
+ * @dat: data pointer over which ecc is computed
+ * @ecc_code: ecc code buffer
+ *
+ * Using non-inverted ECC is considered ugly since writing a blank
+ * page (padding) will clear the ECC bytes. This is not a problem as long
+ * no one is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
+{
+	unsigned int val = 0x0;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	/* read ecc result */
+	val = gpmc_read_reg(GPMC_ECC1_RESULT);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 7951ae1447e..79c478c4cb1 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -21,32 +21,19 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 
 void __init omap2_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap24xx()) {
-		const int omap24xx_pins[][2] = {
-			{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-			{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-		};
-		int scl, sda;
-
-		scl = omap24xx_pins[bus_id - 1][0];
-		sda = omap24xx_pins[bus_id - 1][1];
-		omap_cfg_reg(sda);
-		omap_cfg_reg(scl);
-	}
+	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
 
 	/* First I2C bus is not muxable */
-	if (cpu_is_omap34xx() && bus_id > 1) {
-		char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+	if (bus_id == 1)
+		return;
 
-		sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-	}
+	sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 }
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37b8a1a4adf..e8256a2ed8e 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -25,6 +25,8 @@
 #include <plat/control.h>
 #include <plat/cpu.h>
 
+#include <mach/id.h>
+
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
@@ -102,30 +104,36 @@ static struct omap_id omap_ids[] __initdata = {
 static void __iomem *tap_base;
 static u16 tap_prod_id;
 
-void __init omap24xx_check_revision(void)
+void omap_get_die_id(struct omap_die_id *odi)
+{
+	odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
+	odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
+	odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
+	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
+}
+
+static void __init omap24xx_check_revision(void)
 {
 	int i, j;
 	u32 idcode, prod_id;
 	u16 hawkeye;
 	u8  dev_type, rev;
+	struct omap_die_id odi;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
 	prod_id = read_tap_reg(tap_prod_id);
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
+	omap_get_die_id(&odi);
 
 	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
 		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_0));
+	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
 	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_1),
-		 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_2));
-	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_3));
+		 odi.id_1, (odi.id_1 >> 28) & 0xf);
+	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
+	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
 	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
 		 prod_id, dev_type);
 
@@ -164,7 +172,7 @@ void __init omap24xx_check_revision(void)
 		omap3_features |= OMAP3_HAS_ ##feat;			\
 	}
 
-void __init omap3_check_features(void)
+static void __init omap3_check_features(void)
 {
 	u32 status;
 
@@ -179,6 +187,8 @@ void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, ISP);
 	if (cpu_is_omap3630())
 		omap3_features |= OMAP3_HAS_192MHZ_CLK;
+	if (!cpu_is_omap3505() && !cpu_is_omap3517())
+		omap3_features |= OMAP3_HAS_IO_WAKEUP;
 
 	/*
 	 * TODO: Get additional info (where applicable)
@@ -186,7 +196,7 @@ void __init omap3_check_features(void)
 	 */
 }
 
-void __init omap3_check_revision(void)
+static void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
@@ -259,15 +269,31 @@ void __init omap3_check_revision(void)
 		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		break;
 	case 0xb891:
-	/* FALLTHROUGH */
+		/* Handle 36xx devices */
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+
+		switch(rev) {
+		case 0: /* Take care of early samples */
+			omap_revision = OMAP3630_REV_ES1_0;
+			break;
+		case 1:
+			omap_revision = OMAP3630_REV_ES1_1;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+			break;
+		case 2:
+		default:
+			omap_revision =  OMAP3630_REV_ES1_2;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+			break;
+		}
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP3630_REV_ES1_0;
-		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+		omap_revision =  OMAP3630_REV_ES1_2;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
 	}
 }
 
-void __init omap4_check_revision(void)
+static void __init omap4_check_revision(void)
 {
 	u32 idcode;
 	u16 hawkeye;
@@ -297,7 +323,7 @@ void __init omap4_check_revision(void)
 	if (omap3_has_ ##feat())		\
 		printk(#feat" ");
 
-void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(void)
 {
 	u8 rev = GET_OMAP_REVISION();
 	char cpu_name[16], cpu_rev[16];
@@ -339,6 +365,12 @@ void __init omap3_cpuinfo(void)
 	case OMAP_REVBITS_00:
 		strcpy(cpu_rev, "1.0");
 		break;
+	case OMAP_REVBITS_01:
+		strcpy(cpu_rev, "1.1");
+		break;
+	case OMAP_REVBITS_02:
+		strcpy(cpu_rev, "1.2");
+		break;
 	case OMAP_REVBITS_10:
 		strcpy(cpu_rev, "2.0");
 		break;
diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-flash.h
index 465169c0908..b2242ae2bb6 100644
--- a/arch/arm/mach-omap2/include/mach/board-sdp.h
+++ b/arch/arm/mach-omap2/include/mach/board-flash.h
@@ -12,10 +12,17 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <plat/gpmc.h>
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
 
 struct flash_partitions {
 	struct mtd_partition *parts;
 	int nr_parts;
 };
 
-extern void sdp_flash_init(struct flash_partitions []);
+extern void board_flash_init(struct flash_partitions [],
+				char chip_sel[][GPMC_CS_NUM]);
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
index c93b29e21b7..3af69d2c3dc 100644
--- a/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -1,5 +1,11 @@
 /*
  * Defines for zoom boards
  */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ZOOM_NAND_CS    0
+
+extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs);
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 35b24409a0c..09331bbbda5 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -36,7 +36,7 @@ omap_uart_lsr:	.word	0
 		/* Use omap_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
 		ldrne	\rx, =omap_uart_virt	@ virtual base address
 		ldr	\rx, [\rx, #0]
 		cmp	\rx, #0			@ is port configured?
@@ -89,26 +89,36 @@ omap_uart_lsr:	.word	0
 44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
 95:		ldr	\rx, =ZOOM_UART_BASE
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		ldr	\rx, =ZOOM_UART_VIRT
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
+		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\tmp, =omap_uart_lsr
 		str	\rx, [\tmp, #0]
 		b	10b
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rx, \rx, #0x48000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		sub	\rx, \rx, #0x48000000	@ phys base
 		add	\rx, \rx, #0xfa000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
+		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\tmp, =omap_uart_lsr
 		str	\rx, [\tmp, #0]
 
 		b	10b
@@ -120,7 +130,10 @@ omap_uart_lsr:	.word	0
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldr	\rd, =omap_uart_lsr
+1001:		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1		@ MMU enabled?
+		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\rd, =omap_uart_lsr
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/include/mach/id.h
new file mode 100644
index 00000000000..02ed3aa56f1
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/id.h
@@ -0,0 +1,22 @@
+/*
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP2_ARCH_ID_H
+#define OMAP2_ARCH_ID_H
+
+struct omap_die_id {
+	u32 id_0;
+	u32 id_1;
+	u32 id_2;
+	u32 id_3;
+};
+
+void omap_get_die_id(struct omap_die_id *odi);
+
+#endif
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index 423af3a6dd3..2744dfee1ff 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -13,6 +13,13 @@
 #ifndef OMAP_ARCH_OMAP4_COMMON_H
 #define OMAP_ARCH_OMAP4_COMMON_H
 
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+
 #ifdef CONFIG_CACHE_L2X0
 extern void __iomem *l2cache_base;
 #endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 4e1f53d0b88..b9ea70bce56 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -28,7 +28,6 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
@@ -44,6 +43,7 @@
 
 #include <plat/clockdomain.h>
 #include "clockdomains.h"
+
 #include <plat/omap_hwmod.h>
 
 /*
@@ -313,6 +313,8 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	u8 skip_setup_idle = 0;
+
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_autodeps);
 	if (cpu_is_omap242x())
@@ -321,7 +323,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		omap2430_hwmod_init();
 	else if (cpu_is_omap34xx())
 		omap3xxx_hwmod_init();
-	omap2_mux_init();
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
@@ -337,9 +338,13 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		pr_err("Could not init clock framework - unknown CPU\n");
 
 	omap_serial_early_init();
+
+#ifndef CONFIG_PM_RUNTIME
+	skip_setup_idle = 1;
+#endif
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
-		omap_hwmod_late_init();
-	omap_pm_if_init();
+		omap_hwmod_late_init(skip_setup_idle);
+
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index e82da680d90..14ee686b649 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -44,9 +44,13 @@
 #define MMU_IRQ_EMUMISS		(1 << 2)
 #define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
 #define MMU_IRQ_TLBMISS		(1 << 0)
-#define MMU_IRQ_MASK	\
-	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
-	 MMU_IRQ_TRANSLATIONFAULT)
+
+#define __MMU_IRQ_FAULT		\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
+#define MMU_IRQ_MASK		\
+	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
+#define MMU_IRQ_TWL_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
+#define MMU_IRQ_TLB_MISS_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
 
 /* MMU_CNTL */
 #define MMU_CNTL_SHIFT		1
@@ -61,6 +65,26 @@
 	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
 	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
 
+
+static void __iommu_set_twl(struct iommu *obj, bool on)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	if (on)
+		iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
+	else
+		iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
+
+	l &= ~MMU_CNTL_MASK;
+	if (on)
+		l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	else
+		l |= (MMU_CNTL_MMU_EN);
+
+	iommu_write_reg(obj, l, MMU_CNTL);
+}
+
+
 static int omap2_iommu_enable(struct iommu *obj)
 {
 	u32 l, pa;
@@ -96,13 +120,9 @@ static int omap2_iommu_enable(struct iommu *obj)
 	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
 	iommu_write_reg(obj, l, MMU_SYSCONFIG);
 
-	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
 	iommu_write_reg(obj, pa, MMU_TTB);
 
-	l = iommu_read_reg(obj, MMU_CNTL);
-	l &= ~MMU_CNTL_MASK;
-	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
-	iommu_write_reg(obj, l, MMU_CNTL);
+	__iommu_set_twl(obj, true);
 
 	return 0;
 }
@@ -118,6 +138,11 @@ static void omap2_iommu_disable(struct iommu *obj)
 	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
 }
 
+static void omap2_iommu_set_twl(struct iommu *obj, bool on)
+{
+	__iommu_set_twl(obj, false);
+}
+
 static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 {
 	int i;
@@ -147,7 +172,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 	printk("\n");
 
 	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
-	omap2_iommu_disable(obj);
+
 	return stat;
 }
 
@@ -300,6 +325,7 @@ static const struct iommu_functions omap2_iommu_ops = {
 
 	.enable		= omap2_iommu_enable,
 	.disable	= omap2_iommu_disable,
+	.set_twl	= omap2_iommu_set_twl,
 	.fault_isr	= omap2_iommu_fault_isr,
 
 	.tlb_read_cr	= omap2_tlb_read_cr,
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 318f3638653..42dbfa46e65 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -10,7 +10,6 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -18,8 +17,6 @@
 #include <plat/mailbox.h>
 #include <mach/irqs.h>
 
-#define DRV_NAME "omap2-mailbox"
-
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -131,7 +128,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 	}
 
 	l = mbox_read_reg(MAILBOX_REVISION);
-	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+	pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
 	if (cpu_is_omap44xx())
 		l = OMAP4_SMARTIDLE;
@@ -283,6 +280,8 @@ static struct omap_mbox_ops omap2_mbox_ops = {
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
+
+#if defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_ARCH_OMAP2420)
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -300,10 +299,46 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.irqdisable	= MAILBOX_IRQENABLE(0),
 };
 
+struct omap_mbox mbox_dsp_info = {
+	.name	= "dsp",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_dsp_priv,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+/* IVA */
+static struct omap_mbox2_priv omap2_mbox_iva_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.msg_stat	= MAILBOX_MSGSTATUS(3),
+	},
+	.irqenable	= MAILBOX_IRQENABLE(3),
+	.irqstatus	= MAILBOX_IRQSTATUS(3),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
+};
+
+static struct omap_mbox mbox_iva_info = {
+	.name	= "iva",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_iva_priv,
+};
 
+struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+#endif
 
-/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
-to use this*/
+#if defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 */
 static struct omap_mbox2_priv omap2_mbox_1_priv = {
 	.tx_fifo = {
 		.msg		= MAILBOX_MESSAGE(0),
@@ -325,14 +360,6 @@ struct omap_mbox mbox_1_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_1_priv,
 };
-EXPORT_SYMBOL(mbox_1_info);
-
-struct omap_mbox mbox_dsp_info = {
-	.name	= "dsp",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_dsp_priv,
-};
-EXPORT_SYMBOL(mbox_dsp_info);
 
 static struct omap_mbox2_priv omap2_mbox_2_priv = {
 	.tx_fifo = {
@@ -355,110 +382,64 @@ struct omap_mbox mbox_2_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_2_priv,
 };
-EXPORT_SYMBOL(mbox_2_info);
-
-
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(2),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(3),
-		.msg_stat	= MAILBOX_MSGSTATUS(3),
-	},
-	.irqenable	= MAILBOX_IRQENABLE(3),
-	.irqstatus	= MAILBOX_IRQSTATUS(3),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
-	.irqdisable	= MAILBOX_IRQENABLE(3),
-};
 
-static struct omap_mbox mbox_iva_info = {
-	.name	= "iva",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_iva_priv,
-};
+struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
 
 static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
 	int ret;
+	struct omap_mbox **list;
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
+	if (false)
+		;
+#if defined(CONFIG_ARCH_OMAP3430)
+	else if (cpu_is_omap3430()) {
+		list = omap3_mboxes;
+
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 	}
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base)
-		return -ENOMEM;
+#endif
+#if defined(CONFIG_ARCH_OMAP2420)
+	else if (cpu_is_omap2420()) {
+		list = omap2_mboxes;
 
-	/* DSP or IVA2 IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
+		list[1]->irq = platform_get_irq_byname(pdev, "iva");
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	else if (cpu_is_omap44xx()) {
+		list = omap4_mboxes;
 
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
-		goto err_dsp;
+		list[0]->irq = list[1]->irq =
+			platform_get_irq_byname(pdev, "mbox");
 	}
-	if (cpu_is_omap44xx()) {
-		mbox_1_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
-	} else {
-		mbox_dsp_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+#endif
+	else {
+		pr_err("%s: platform not supported\n", __func__);
+		return -ENODEV;
 	}
-	if (ret)
-		goto err_dsp;
 
-	if (cpu_is_omap44xx()) {
-		mbox_2_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_1_info);
-			goto err_dsp;
-		}
-	}
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-	if (cpu_is_omap2420()) {
-		/* IVA IRQ */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-		if (unlikely(!res)) {
-			dev_err(&pdev->dev, "invalid irq resource\n");
-			ret = -ENODEV;
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
-		mbox_iva_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
+
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
+		iounmap(mbox_base);
+		return ret;
 	}
-#endif
 	return 0;
 
-err_dsp:
-	iounmap(mbox_base);
 	return ret;
 }
 
 static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 {
-#if defined(CONFIG_ARCH_OMAP2420)
-	omap_mbox_unregister(&mbox_iva_info);
-#endif
-
-	if (cpu_is_omap44xx()) {
-		omap_mbox_unregister(&mbox_2_info);
-		omap_mbox_unregister(&mbox_1_info);
-	} else
-		omap_mbox_unregister(&mbox_dsp_info);
+	omap_mbox_unregister();
 	iounmap(mbox_base);
 	return 0;
 }
@@ -467,7 +448,7 @@ static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = DRV_NAME,
+		.name = "omap-mailbox",
 	},
 };
 
@@ -486,5 +467,6 @@ module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:"DRV_NAME);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index c29337074ad..467aae24578 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -20,17 +20,18 @@
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
-#include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include "mux.h"
+
 static void omap2_mcbsp2_mux_setup(void)
 {
-	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
-	omap_cfg_reg(R14_24XX_MCBSP2_FSX);
-	omap_cfg_reg(W15_24XX_MCBSP2_DR);
-	omap_cfg_reg(V15_24XX_MCBSP2_DX);
-	omap_cfg_reg(V14_24XX_GPIO117);
+	omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
+	omap_mux_init_gpio(117, OMAP_PULL_ENA);
 	/*
 	 * TODO: Need to add MUX settings for OMAP 2430 SDP
 	 */
@@ -133,7 +134,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -143,7 +144,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x3FF,
+		.buffer_size	= 0x500, /* The FIFO has 1024 + 256 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -153,7 +154,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -162,7 +163,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -171,7 +172,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x6F,
+		.buffer_size	= 0x80, /* The FIFO has 128 locations */
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8b3d26935a3..ab403b2ed26 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -37,12 +37,12 @@
 #include <asm/system.h>
 
 #include <plat/control.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
+#define MUXABLE_GPIO_MODE3		BIT(0)
 
 struct omap_mux_entry {
 	struct omap_mux		mux;
@@ -51,6 +51,7 @@ struct omap_mux_entry {
 
 static unsigned long mux_phys;
 static void __iomem *mux_base;
+static u8 omap_mux_flags;
 
 u16 omap_mux_read(u16 reg)
 {
@@ -76,301 +77,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
-
-static struct omap_mux_cfg arch_mux_cfg;
-
-/* NOTE: See mux.h for the enumeration */
-
-static struct pin_config __initdata_or_module omap24xx_pins[] = {
-/*
- *	description			mux	mux	pull	pull	debug
- *					offset	mode	ena	type
- */
-
-/* 24xx I2C */
-MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
-MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	1,	1)
-MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
-
-/* Menelaus interrupt */
-MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
-
-/* 24xx clocks */
-MUX_CFG_24XX("W14_24XX_SYS_CLKOUT",	0x137,	0,	1,	1,	1)
-
-/* 24xx GPMC chipselects, wait pin monitoring */
-MUX_CFG_24XX("E2_GPMC_NCS2",		0x08e,	0,	1,	1,	1)
-MUX_CFG_24XX("L2_GPMC_NCS7",		0x093,	0,	1,	1,	1)
-MUX_CFG_24XX("L3_GPMC_WAIT0",		0x09a,	0,	1,	1,	1)
-MUX_CFG_24XX("N7_GPMC_WAIT1",		0x09b,	0,	1,	1,	1)
-MUX_CFG_24XX("M1_GPMC_WAIT2",		0x09c,	0,	1,	1,	1)
-MUX_CFG_24XX("P1_GPMC_WAIT3",		0x09d,	0,	1,	1,	1)
-
-/* 24xx McBSP */
-MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX",	0x124,	1,	1,	0,	1)
-MUX_CFG_24XX("R14_24XX_MCBSP2_FSX",	0x125,	1,	1,	0,	1)
-MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
-MUX_CFG_24XX("V15_24XX_MCBSP2_DX",	0x127,	1,	1,	0,	1)
-
-/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11",		0x0c9,	3,	1,	1,	1)
-MUX_CFG_24XX("P21_242X_GPIO12",		0x0ca,	3,	0,	0,	1)
-MUX_CFG_24XX("AA10_242X_GPIO13",	0x0e5,	3,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_GPIO14",		0x0e6,	3,	0,	0,	1)
-MUX_CFG_24XX("AA4_242X_GPIO15",		0x0e7,	3,	0,	0,	1)
-MUX_CFG_24XX("Y11_242X_GPIO16",		0x0e8,	3,	0,	0,	1)
-MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,	3,	0,	0,	1)
-MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
-MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
-MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
-MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
-MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
-MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
-MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
-MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
-MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
-MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
-
-/* 242x DBG GPIO */
-MUX_CFG_24XX("V4_242X_GPIO49",		0xd3,	3,	0,	0,	1)
-MUX_CFG_24XX("W2_242X_GPIO50",		0xd4,	3,	0,	0,	1)
-MUX_CFG_24XX("U4_242X_GPIO51",		0xd5,	3,	0,	0,	1)
-MUX_CFG_24XX("V3_242X_GPIO52",		0xd6,	3,	0,	0,	1)
-MUX_CFG_24XX("V2_242X_GPIO53",		0xd7,	3,	0,	0,	1)
-MUX_CFG_24XX("V6_242X_GPIO53",		0xcf,	3,	0,	0,	1)
-MUX_CFG_24XX("T4_242X_GPIO54",		0xd8,	3,	0,	0,	1)
-MUX_CFG_24XX("Y4_242X_GPIO54",		0xd0,	3,	0,	0,	1)
-MUX_CFG_24XX("T3_242X_GPIO55",		0xd9,	3,	0,	0,	1)
-MUX_CFG_24XX("U2_242X_GPIO56",		0xda,	3,	0,	0,	1)
-
-/* 24xx external DMA requests */
-MUX_CFG_24XX("AA10_242X_DMAREQ0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_DMAREQ1",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("E4_242X_DMAREQ2",		0x074,	2,	0,	0,	1)
-MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,	2,	0,	0,	1)
-MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
-MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
-
-/* UART3 */
-MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
-MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
-
-/* MMC/SDIO */
-MUX_CFG_24XX("G19_24XX_MMC_CLKO",	0x0f3,	0,	0,	0,	1)
-MUX_CFG_24XX("H18_24XX_MMC_CMD",	0x0f4,	0,	0,	0,	1)
-MUX_CFG_24XX("F20_24XX_MMC_DAT0",	0x0f5,	0,	0,	0,	1)
-MUX_CFG_24XX("H14_24XX_MMC_DAT1",	0x0f6,	0,	0,	0,	1)
-MUX_CFG_24XX("E19_24XX_MMC_DAT2",	0x0f7,	0,	0,	0,	1)
-MUX_CFG_24XX("D19_24XX_MMC_DAT3",	0x0f8,	0,	0,	0,	1)
-MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0",	0x0f9,	0,	0,	0,	1)
-MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1",	0x0fa,	0,	0,	0,	1)
-MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2",	0x0fb,	0,	0,	0,	1)
-MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3",	0x0fc,	0,	0,	0,	1)
-MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR",	0x0fd,	0,	0,	0,	1)
-MUX_CFG_24XX("H15_24XX_MMC_CLKI",	0x0fe,	0,	0,	0,	1)
-
-/* Full speed USB */
-MUX_CFG_24XX("J20_24XX_USB0_PUEN",	0x11d,	0,	0,	0,	1)
-MUX_CFG_24XX("J19_24XX_USB0_VP",	0x11e,	0,	0,	0,	1)
-MUX_CFG_24XX("K20_24XX_USB0_VM",	0x11f,	0,	0,	0,	1)
-MUX_CFG_24XX("J18_24XX_USB0_RCV",	0x120,	0,	0,	0,	1)
-MUX_CFG_24XX("K19_24XX_USB0_TXEN",	0x121,	0,	0,	0,	1)
-MUX_CFG_24XX("J14_24XX_USB0_SE0",	0x122,	0,	0,	0,	1)
-MUX_CFG_24XX("K18_24XX_USB0_DAT",	0x123,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N14_24XX_USB1_SE0",	0x0ed,	2,	0,	0,	1)
-MUX_CFG_24XX("W12_24XX_USB1_SE0",	0x0dd,	3,	0,	0,	1)
-MUX_CFG_24XX("P15_24XX_USB1_DAT",	0x0ee,	2,	0,	0,	1)
-MUX_CFG_24XX("R13_24XX_USB1_DAT",	0x0e0,	3,	0,	0,	1)
-MUX_CFG_24XX("W20_24XX_USB1_TXEN",	0x0ec,	2,	0,	0,	1)
-MUX_CFG_24XX("P13_24XX_USB1_TXEN",	0x0df,	3,	0,	0,	1)
-MUX_CFG_24XX("V19_24XX_USB1_RCV",	0x0eb,	2,	0,	0,	1)
-MUX_CFG_24XX("V12_24XX_USB1_RCV",	0x0de,	3,	0,	0,	1)
-
-MUX_CFG_24XX("AA10_24XX_USB2_SE0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("Y11_24XX_USB2_DAT",	0x0e8,	2,	0,	0,	1)
-MUX_CFG_24XX("AA12_24XX_USB2_TXEN",	0x0e9,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_24XX_USB2_RCV",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0",	0x0e7,	2,	0,	0,	1)
-
-/* Keypad GPIO*/
-MUX_CFG_24XX("T19_24XX_KBR0",		0x106,	3,	1,	1,	1)
-MUX_CFG_24XX("R19_24XX_KBR1",		0x107,	3,	1,	1,	1)
-MUX_CFG_24XX("V18_24XX_KBR2",		0x139,	3,	1,	1,	1)
-MUX_CFG_24XX("M21_24XX_KBR3",		0xc9,	3,	1,	1,	1)
-MUX_CFG_24XX("E5__24XX_KBR4",		0x138,	3,	1,	1,	1)
-MUX_CFG_24XX("M18_24XX_KBR5",		0x10e,	3,	1,	1,	1)
-MUX_CFG_24XX("R20_24XX_KBC0",		0x108,	3,	0,	0,	1)
-MUX_CFG_24XX("M14_24XX_KBC1",		0x109,	3,	0,	0,	1)
-MUX_CFG_24XX("H19_24XX_KBC2",		0x114,	3,	0,	0,	1)
-MUX_CFG_24XX("V17_24XX_KBC3",		0x135,	3,	0,	0,	1)
-MUX_CFG_24XX("P21_24XX_KBC4",		0xca,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_KBC5",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("N19_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 24xx Menelaus Keypad GPIO */
-MUX_CFG_24XX("B3__24XX_KBR5",		0x30,	3,	1,	1,	1)
-MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
-MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 2430 USB */
-MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
-MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
-MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
-MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
-MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
-
-/* 2430 HS-USB */
-MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
-MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
-MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
-MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
-MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
-
-/* 2430 McBSP */
-MUX_CFG_24XX("AD6_2430_MCBSP_CLKS",	0x011E,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR",	0x011A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD5_2430_MCBSP1_FSR",	0x011B,	0,	0,	0,	1)
-MUX_CFG_24XX("AA1_2430_MCBSP1_DX",	0x011C,	0,	0,	0,	1)
-MUX_CFG_24XX("AF3_2430_MCBSP1_DR",	0x011D,	0,	0,	0,	1)
-MUX_CFG_24XX("AB3_2430_MCBSP1_FSX",	0x011F,	0,	0,	0,	1)
-MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX",	0x0120,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX",	0x0103,	0,	0,	0,	1)
-MUX_CFG_24XX("AE4_2430_MCBSP3_FSX",	0x0104,	0,	0,	0,	1)
-MUX_CFG_24XX("AE2_2430_MCBSP3_DR",	0x0105,	0,	0,	0,	1)
-MUX_CFG_24XX("AF4_2430_MCBSP3_DX",	0x0106,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N3_2430_MCBSP4_CLKX",	0x010B,	1,	0,	0,	1)
-MUX_CFG_24XX("AD23_2430_MCBSP4_DR",	0x010C,	1,	0,	0,	1)
-MUX_CFG_24XX("AB25_2430_MCBSP4_DX",	0x010D,	1,	0,	0,	1)
-MUX_CFG_24XX("AC25_2430_MCBSP4_FSX",	0x010E,	1,	0,	0,	1)
-
-MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("AF12_2430_MCBSP5_FSX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("K7_2430_MCBSP5_DX",	0x00EF,	1,	0,	0,	1)
-MUX_CFG_24XX("M1_2430_MCBSP5_DR",	0x00F0,	1,	0,	0,	1)
-
-/* 2430 MCSPI1 */
-MUX_CFG_24XX("Y18_2430_MCSPI1_CLK",	0x010F,	0,	0,	0,	1)
-MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO",	0x0110,	0,	0,	0,	1)
-MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI",	0x0111,	0,	0,	0,	1)
-MUX_CFG_24XX("U1_2430_MCSPI1_CS0",	0x0112,	0,	0,	0,	1)
-
-/* Touchscreen GPIO */
-MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
-
-};
-
-#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-
-static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
-{
-	u16 orig;
-	u8 warn = 0, debug = 0;
-
-	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-	debug = cfg->debug;
-#endif
-	warn = (orig != reg);
-	if (debug || warn)
-		printk(KERN_WARNING
-			"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
-			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
-			orig, reg);
-}
-#else
-#define omap2_cfg_debug(x, y)	do {} while (0)
-#endif
-
-static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
-{
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	u8 reg = 0;
-
-	spin_lock_irqsave(&mux_spin_lock, flags);
-	reg |= cfg->mask & 0x7;
-	if (cfg->pull_val)
-		reg |= OMAP2_PULL_ENA;
-	if (cfg->pu_pd_val)
-		reg |= OMAP2_PULL_UP;
-	omap2_cfg_debug(cfg, reg);
-	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
-
-	return 0;
-}
-
-int __init omap2_mux_init(void)
-{
-	u32 mux_pbase;
-
-	if (cpu_is_omap2420())
-		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else if (cpu_is_omap2430())
-		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else
-		return -ENODEV;
-
-	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
-	if (!mux_base) {
-		printk(KERN_ERR "mux: Could not ioremap\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap24xx()) {
-		arch_mux_cfg.pins	= omap24xx_pins;
-		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
-
-		return omap_mux_register(&arch_mux_cfg);
-	}
-
-	return 0;
-}
-
-#else
-int __init omap2_mux_init(void)
-{
-	return 0;
-}
-#endif	/* CONFIG_OMAP_MUX */
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP3
 static LIST_HEAD(muxmodes);
 static DEFINE_MUTEX(muxmode_mutex);
 
@@ -381,6 +87,9 @@ static char *omap_mux_options;
 int __init omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_entry *e;
+	struct omap_mux *gpio_mux;
+	u16 old_mode;
+	u16 mux_mode;
 	int found = 0;
 
 	if (!gpio)
@@ -389,31 +98,33 @@ int __init omap_mux_init_gpio(int gpio, int val)
 	list_for_each_entry(e, &muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		if (gpio == m->gpio) {
-			u16 old_mode;
-			u16 mux_mode;
-
-			old_mode = omap_mux_read(m->reg_offset);
-			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-			mux_mode |= OMAP_MUX_MODE4;
-			printk(KERN_DEBUG "mux: Setting signal "
-				"%s.gpio%i 0x%04x -> 0x%04x\n",
-				m->muxnames[0], gpio, old_mode, mux_mode);
-			omap_mux_write(mux_mode, m->reg_offset);
+			gpio_mux = m;
 			found++;
 		}
 	}
 
-	if (found == 1)
-		return 0;
+	if (found == 0) {
+		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		return -ENODEV;
+	}
 
 	if (found > 1) {
-		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+		printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n",
+				found, gpio);
 		return -EINVAL;
 	}
 
-	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+	old_mode = omap_mux_read(gpio_mux->reg_offset);
+	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+	if (omap_mux_flags & MUXABLE_GPIO_MODE3)
+		mux_mode |= OMAP_MUX_MODE3;
+	else
+		mux_mode |= OMAP_MUX_MODE4;
+	printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n",
+			gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
+	omap_mux_write(mux_mode, gpio_mux->reg_offset);
 
-	return -ENODEV;
+	return 0;
 }
 
 int __init omap_mux_init_signal(char *muxname, int val)
@@ -1032,6 +743,9 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 		return -ENODEV;
 	}
 
+	if (cpu_is_omap24xx())
+		omap_mux_flags = MUXABLE_GPIO_MODE3;
+
 	omap_mux_init_package(superset, package_subset, package_balls);
 	omap_mux_init_list(superset);
 	omap_mux_init_signals(board_mux);
@@ -1039,5 +753,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	return 0;
 }
 
-#endif	/* CONFIG_ARCH_OMAP3 */
-
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 480abc56e60..a8e040c2c7e 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -7,6 +7,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "mux2420.h"
+#include "mux2430.h"
 #include "mux34xx.h"
 
 #define OMAP_MUX_TERMINATOR	0xffff
@@ -56,10 +58,12 @@
 
 /* Flags for omap_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
-#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_ZAC		2		/* 24xx 447-pin POP */
+#define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
 
 
 #define OMAP_MUX_NR_MODES	8			/* Available modes */
@@ -102,7 +106,7 @@ struct omap_board_mux {
 	u16	value;
 };
 
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_OMAP_MUX)
 
 /**
  * omap_mux_init_gpio - initialize a signal based on the GPIO number
@@ -171,6 +175,20 @@ void omap_mux_write(u16 val, u16 mux_offset);
 void omap_mux_write_array(struct omap_board_mux *board_mux);
 
 /**
+ * omap2420_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap2430_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table
  * @flags:		OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c
new file mode 100644
index 00000000000..fdb04a7eb8a
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.c
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2420_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2420
+ */
+static struct omap_mux __initdata omap2420_muxmodes[] = {
+	_OMAP2420_MUXENTRY(CAM_D0, 54,
+		"cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
+		NULL, NULL, "etk_d2", NULL),
+	_OMAP2420_MUXENTRY(CAM_D1, 53,
+		"cam_d1", "hw_dbg3", "sti_din", "gpio_53",
+		NULL, NULL, "etk_d3", NULL),
+	_OMAP2420_MUXENTRY(CAM_D2, 52,
+		"cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
+		NULL, NULL, "etk_d4", NULL),
+	_OMAP2420_MUXENTRY(CAM_D3, 51,
+		"cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
+		NULL, NULL, "etk_d5", NULL),
+	_OMAP2420_MUXENTRY(CAM_D4, 50,
+		"cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
+		NULL, NULL, "etk_d6", NULL),
+	_OMAP2420_MUXENTRY(CAM_D5, 49,
+		"cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
+		NULL, NULL, "etk_d7", NULL),
+	_OMAP2420_MUXENTRY(CAM_D6, 0,
+		"cam_d6", "hw_dbg8", NULL, NULL,
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(CAM_D7, 0,
+		"cam_d7", "hw_dbg9", NULL, NULL,
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(CAM_D8, 54,
+		"cam_d8", "hw_dbg10", NULL, "gpio_54",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(CAM_D9, 53,
+		"cam_d9", "hw_dbg11", NULL, "gpio_53",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(CAM_HS, 55,
+		"cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
+		NULL, NULL, "etk_d1", NULL),
+	_OMAP2420_MUXENTRY(CAM_LCLK, 57,
+		"cam_lclk", NULL, "mcbsp_clks", "gpio_57",
+		NULL, NULL, "etk_c1", NULL),
+	_OMAP2420_MUXENTRY(CAM_VS, 56,
+		"cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
+		NULL, NULL, "etk_d0", NULL),
+	_OMAP2420_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA10, 40,
+		"dss_data10", NULL, NULL, "gpio_40",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA11, 41,
+		"dss_data11", NULL, NULL, "gpio_41",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA12, 42,
+		"dss_data12", NULL, NULL, "gpio_42",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA13, 43,
+		"dss_data13", NULL, NULL, "gpio_43",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA14, 44,
+		"dss_data14", NULL, NULL, "gpio_44",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA15, 45,
+		"dss_data15", NULL, NULL, "gpio_45",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
+		"eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
+		"eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_FS, 114,
+		"eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
+		"eac_ac_mclk", NULL, NULL, "gpio_117",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_RST, 118,
+		"eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
+		"eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
+		"eac_bt_din", NULL, NULL, "gpio_73",
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
+		"eac_bt_dout", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_FS, 72,
+		"eac_bt_fs", NULL, NULL, "gpio_72",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
+		"eac_bt_sclk", NULL, NULL, "gpio_71",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(GPIO_119, 119,
+		"gpio_119", NULL, "sti_din", "gpio_119",
+		NULL, "sys_boot0", "etk_d12", NULL),
+	_OMAP2420_MUXENTRY(GPIO_120, 120,
+		"gpio_120", NULL, "sti_dout", "gpio_120",
+		"cam_d9", "sys_boot1", "etk_d13", NULL),
+	_OMAP2420_MUXENTRY(GPIO_121, 121,
+		"gpio_121", NULL, NULL, "gpio_121",
+		"jtag_emu2", "sys_boot2", "etk_d14", NULL),
+	_OMAP2420_MUXENTRY(GPIO_122, 122,
+		"gpio_122", NULL, NULL, "gpio_122",
+		"jtag_emu3", "sys_boot3", "etk_d15", NULL),
+	_OMAP2420_MUXENTRY(GPIO_124, 124,
+		"gpio_124", NULL, NULL, "gpio_124",
+		NULL, "sys_boot5", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_125, 125,
+		"gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_36, 36,
+		"gpio_36", NULL, NULL, "gpio_36",
+		NULL, "sys_boot4", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_62, 62,
+		"gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_6, 6,
+		"gpio_6", "tv_detpulse", NULL, "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A1, 12,
+		"gpmc_a1", "dss_data18", NULL, "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A2, 11,
+		"gpmc_a2", "dss_data19", NULL, "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A3, 10,
+		"gpmc_a3", "dss_data20", NULL, "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A4, 9,
+		"gpmc_a4", "dss_data21", NULL, "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A5, 8,
+		"gpmc_a5", "dss_data22", NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A6, 7,
+		"gpmc_a6", "dss_data23", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D11, 17,
+		"gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D12, 16,
+		"gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D13, 15,
+		"gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D14, 14,
+		"gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D15, 13,
+		"gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", "ssi2_wake", NULL, "gpio_19",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE0, 29,
+		"gpmc_nbe0", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE1, 30,
+		"gpmc_nbe1", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NWP, 31,
+		"gpmc_nwp", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", NULL, NULL, "gpio_127",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
+		"spi2_ncs1", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
+		"mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_DR, 11,
+		"mcbsp2_dr", NULL, "dss_data22", "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKI, 59,
+		"sdmmc_clki", "ms_clki", NULL, "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKO, 0,
+		"sdmmc_clko", "ms_clko", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
+		"sdmmc_cmd_dir", NULL, NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD, 0,
+		"sdmmc_cmd", "ms_bs", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
+		"sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT0, 0,
+		"sdmmc_dat0", "ms_dat0", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
+		"sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT1, 75,
+		"sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
+		"sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT2, 76,
+		"sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
+		"sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT3, 77,
+		"sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_CKE1, 38,
+		"sdrc_cke1", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS0, 84,
+		"spi1_ncs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS1, 85,
+		"spi1_ncs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS2, 86,
+		"spi1_ncs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS3, 87,
+		"spi1_ncs3", NULL, NULL, "gpio_87",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", NULL, NULL, "gpio_88",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_NCS0, 91,
+		"spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
+		"ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "eac_md_fs", NULL, "gpio_66",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
+		"sys_clkout", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
+		"sys_clkreq", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_NIRQ, 60,
+		"sys_nirq", NULL, NULL, "gpio_60",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", NULL, "dss_data18", "gpio_32",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", NULL, "dss_data19", "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", NULL, "dss_data21", "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", NULL, "dss_data20", "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_DAT, 112,
+		"usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
+		"uart2_tx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_PUEN, 106,
+		"usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_RCV, 109,
+		"usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
+		"uart2_cts", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_SE0, 111,
+		"usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_TXEN, 110,
+		"usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VM, 108,
+		"usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VP, 107,
+		"usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
+		"vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
+		"vlynq_nla", NULL, NULL, "gpio_58",
+		"cam_d6", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
+		"vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
+		"cam_d7", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
+		"vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
+		"cam_d8", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
+		"vlynq_tx0", "usb2_txen", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
+		"vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
+		NULL, NULL, NULL, NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 447-pin POP package
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2420_pop_ball[] = {
+	_OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
+	_OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
+	_OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
+	_OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
+	_OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
+	_OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
+	_OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
+	_OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
+	_OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
+	_OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
+	_OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
+	_OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
+	_OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
+	_OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
+	_OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
+	_OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
+	_OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
+	_OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
+	_OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
+	_OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
+	_OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
+	_OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
+	_OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
+	_OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
+	_OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
+	_OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
+	_OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
+	_OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
+	_OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
+	_OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
+	_OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
+	_OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
+	_OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
+	_OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
+	_OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
+	_OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
+	_OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
+	_OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
+	_OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
+	_OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
+	_OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
+	_OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+	_OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+	_OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
+	_OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
+	_OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
+	_OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
+	_OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
+	_OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
+	_OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2420_pop_ball	 NULL
+#endif
+
+int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2420_pop_ball;
+		break;
+	case OMAP_PACKAGE_ZAF:
+		/* REVISIT: Please add data */
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2420_CONTROL_PADCONF_MUX_SIZE,
+				omap2420_muxmodes, NULL, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2420.h b/arch/arm/mach-omap2/mux2420.h
new file mode 100644
index 00000000000..0f555aa847b
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2420.h
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2420_CONTROL_PADCONF_MUX_PBASE			0x48000030LU
+
+#define OMAP2420_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x48000030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ */
+#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET			0x000
+#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET			0x001
+#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET			0x002
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x003
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x004
+#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET			0x005
+#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET			0x006
+#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET				0x007
+#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET				0x008
+#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET				0x009
+#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET				0x00a
+#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET				0x00b
+#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET				0x00c
+#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET				0x00d
+#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET				0x00e
+#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET				0x00f
+#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET				0x010
+#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET			0x021
+#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET			0x022
+#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET			0x023
+#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET			0x024
+#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET			0x025
+#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET			0x026
+#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET			0x027
+#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET			0x028
+#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET			0x029
+#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET			0x02c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET			0x02d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET			0x02e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET			0x02f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET			0x030
+#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET			0x031
+#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET			0x032
+#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET			0x033
+#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET			0x034
+#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET			0x035
+#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET			0x036
+#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET				0x037
+#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET				0x038
+#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET				0x039
+#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET				0x03a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET				0x03b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET				0x03c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET				0x03d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET				0x03e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET				0x03f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET				0x040
+#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET			0x041
+#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET				0x042
+#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET				0x043
+#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET				0x044
+#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET				0x045
+#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET				0x046
+#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET				0x047
+#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET				0x048
+#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET				0x049
+#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET				0x04a
+#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET			0x04b
+#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET			0x04c
+#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET			0x04d
+#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET			0x04e
+#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET			0x04f
+#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET			0x050
+#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET				0x051
+#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET				0x052
+#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET				0x053
+#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET				0x054
+#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET				0x055
+#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET				0x056
+#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET				0x057
+#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET				0x058
+#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET				0x059
+#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET				0x05a
+#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x05b
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x05c
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x05d
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x05e
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x05f
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x060
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x061
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x062
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x063
+#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET			0x064
+#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x065
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x066
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET			0x067
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x068
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x069
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x06a
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x06b
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x06c
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x06d
+#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x06e
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x06f
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x070
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x071
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x072
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x073
+#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x074
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x075
+#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x076
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x077
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x078
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x079
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x07a
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x07f
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x080
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x081
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x082
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x083
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x084
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x085
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x086
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x087
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x088
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x089
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x08a
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x08b
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x08c
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x08d
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x08e
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x08f
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x090
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x091
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x092
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x093
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x094
+#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET			0x095
+#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET			0x096
+#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET			0x097
+#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET			0x098
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x099
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET			0x09a
+#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET				0x09b
+#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x09c
+#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x09d
+#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x09e
+#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET				0x09f
+#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET				0x0a0
+#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET				0x0a1
+#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET				0x0a2
+#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET				0x0a3
+#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET				0x0a4
+#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET				0x0a5
+#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET				0x0a6
+#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET				0x0a7
+#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET				0x0a8
+#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET				0x0a9
+#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET				0x0aa
+#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET			0x0ab
+#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET			0x0ac
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET			0x0ad
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET			0x0ae
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET			0x0af
+#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET				0x0b0
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET			0x0b1
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET			0x0b2
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET			0x0b3
+#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET			0x0b4
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET			0x0b5
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET			0x0b6
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET			0x0b7
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET			0x0b8
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET			0x0b9
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET			0x0ba
+#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET			0x0bb
+#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET			0x0bc
+#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET			0x0bd
+#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET			0x0be
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET			0x0bf
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET			0x0c0
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET			0x0c1
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET			0x0c2
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET			0x0c3
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET				0x0c4
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET			0x0c5
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET			0x0c6
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET			0x0c7
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET			0x0c8
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET			0x0c9
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET			0x0ca
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET			0x0cb
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET			0x0cc
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET			0x0cd
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET			0x0ce
+#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET			0x0cf
+#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET			0x0d0
+#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET			0x0d1
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET			0x0d2
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET			0x0d3
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET			0x0d4
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET			0x0d5
+#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET			0x0d6
+#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET			0x0d7
+#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET			0x0d8
+#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET			0x0d9
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET			0x0da
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x0db
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x0dc
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x0dd
+#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x0de
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x0df
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET			0x0e0
+#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x0e1
+#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x0e2
+#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x0e3
+#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x0e4
+#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET				0x0e5
+#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET			0x0e6
+#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET			0x0e7
+#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET			0x0e8
+#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET			0x0e9
+#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET				0x0ea
+#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET				0x0eb
+#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET				0x0ec
+#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET			0x0ed
+#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET				0x0ee
+#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET				0x0ef
+#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET			0x0f0
+#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET			0x0f1
+#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET			0x0f2
+#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET			0x0f3
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET			0x0f4
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET			0x0f5
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET			0x0f6
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET			0x0f7
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET			0x0f8
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET			0x0f9
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET			0x0fa
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET			0x0fb
+#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x0fc
+#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET				0x0fd
+#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET			0x0fe
+#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET			0x0ff
+#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET			0x100
+#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET			0x101
+#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET				0x102
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET			0x103
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET			0x104
+#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET				0x105
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x106
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET			0x107
+#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET				0x108
+#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET			0x109
+#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET			0x10a
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x10b
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x10c
+#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x10d
+#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x10e
+#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0x10f
+#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET			0x110
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x111
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET			0x112
+
+#define OMAP2420_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)
diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c
new file mode 100644
index 00000000000..7dcaaa8af32
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.c
@@ -0,0 +1,791 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2430_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2430
+ */
+static struct omap_mux __initdata omap2430_muxmodes[] = {
+	_OMAP2430_MUXENTRY(CAM_D0, 133,
+		"cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
+		NULL, NULL, "etk_d2", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D10, 146,
+		"cam_d10", NULL, NULL, "gpio_146",
+		NULL, NULL, "etk_d12", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D11, 145,
+		"cam_d11", NULL, NULL, "gpio_145",
+		NULL, NULL, "etk_d13", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D1, 132,
+		"cam_d1", "hw_dbg1", "sti_din", "gpio_132",
+		NULL, NULL, "etk_d3", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D2, 129,
+		"cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
+		NULL, NULL, "etk_d4", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D3, 128,
+		"cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
+		NULL, NULL, "etk_d5", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D4, 143,
+		"cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
+		NULL, NULL, "etk_d6", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D5, 112,
+		"cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
+		NULL, NULL, "etk_d7", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D6, 137,
+		"cam_d6", "hw_dbg6", NULL, "gpio_137",
+		NULL, NULL, "etk_d8", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D7, 136,
+		"cam_d7", "hw_dbg7", NULL, "gpio_136",
+		NULL, NULL, "etk_d9", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D8, 135,
+		"cam_d8", "hw_dbg8", NULL, "gpio_135",
+		NULL, NULL, "etk_d10", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D9, 134,
+		"cam_d9", "hw_dbg9", NULL, "gpio_134",
+		NULL, NULL, "etk_d11", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_HS, 11,
+		"cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
+		NULL, NULL, "etk_d1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_LCLK, 0,
+		"cam_lclk", NULL, "mcbsp_clks", NULL,
+		NULL, NULL, "etk_c1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_VS, 12,
+		"cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
+		NULL, NULL, "etk_d0", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA0, 40,
+		"dss_data0", "uart1_cts", NULL, "gpio_40",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA10, 128,
+		"dss_data10", "sdi_data1n", NULL, "gpio_128",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA11, 129,
+		"dss_data11", "sdi_data1p", NULL, "gpio_129",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA12, 130,
+		"dss_data12", "sdi_data2n", NULL, "gpio_130",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA13, 131,
+		"dss_data13", "sdi_data2p", NULL, "gpio_131",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA14, 132,
+		"dss_data14", "sdi_data3n", NULL, "gpio_132",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA15, 133,
+		"dss_data15", "sdi_data3p", NULL, "gpio_133",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA1, 41,
+		"dss_data1", "uart1_rts", NULL, "gpio_41",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA2, 42,
+		"dss_data2", "uart1_tx", NULL, "gpio_42",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA3, 43,
+		"dss_data3", "uart1_rx", NULL, "gpio_43",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA4, 44,
+		"dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA5, 45,
+		"dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA6, 144,
+		"dss_data6", NULL, NULL, "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA7, 147,
+		"dss_data7", NULL, NULL, "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_HSYNC, 110,
+		"dss_hsync", NULL, NULL, "gpio_110",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_113, 113,
+		"gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_114, 114,
+		"gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_115, 115,
+		"gpio_115", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_116, 116,
+		"gpio_116", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_128, 128,
+		"gpio_128", NULL, "sti_din", "gpio_128",
+		NULL, "sys_boot0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_129, 129,
+		"gpio_129", NULL, "sti_dout", "gpio_129",
+		NULL, "sys_boot1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_130, 130,
+		"gpio_130", NULL, NULL, "gpio_130",
+		"jtag_emu2", "sys_boot2", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_131, 131,
+		"gpio_131", NULL, NULL, "gpio_131",
+		"jtag_emu3", "sys_boot3", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_132, 132,
+		"gpio_132", NULL, NULL, "gpio_132",
+		NULL, "sys_boot4", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_133, 133,
+		"gpio_133", NULL, NULL, "gpio_133",
+		NULL, "sys_boot5", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_134, 134,
+		"gpio_134", "ccp_datn", NULL, "gpio_134",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_135, 135,
+		"gpio_135", "ccp_datp", NULL, "gpio_135",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_136, 136,
+		"gpio_136", "ccp_clkn", NULL, "gpio_136",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_137, 137,
+		"gpio_137", "ccp_clkp", NULL, "gpio_137",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_138, 138,
+		"gpio_138", "spi3_clk", NULL, "gpio_138",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_139, 139,
+		"gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_140, 140,
+		"gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
+		NULL, NULL, "etk_d14", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_141, 141,
+		"gpio_141", "spi3_somi", NULL, "gpio_141",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_142, 142,
+		"gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
+		NULL, NULL, "etk_d15", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_148, 148,
+		"gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_149, 149,
+		"gpio_149", "mcbsp5_dx", NULL, "gpio_149",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_150, 150,
+		"gpio_150", "mcbsp5_dr", NULL, "gpio_150",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_151, 151,
+		"gpio_151", "sys_pwrok", NULL, "gpio_151",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_152, 152,
+		"gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_153, 153,
+		"gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_154, 154,
+		"gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_63, 63,
+		"gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_78, 78,
+		"gpio_78", NULL, "uart2_rts", "gpio_78",
+		"uart3_rts_sd", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_79, 79,
+		"gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
+		"uart3_tx_irtx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_7, 7,
+		"gpio_7", NULL, "uart2_cts", "gpio_7",
+		"uart3_cts_rctx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_80, 80,
+		"gpio_80", NULL, "uart2_rx", "gpio_80",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A1, 31,
+		"gpmc_a1", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A2, 30,
+		"gpmc_a2", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A3, 29,
+		"gpmc_a3", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A4, 49,
+		"gpmc_a4", NULL, NULL, "gpio_49",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A5, 53,
+		"gpmc_a5", NULL, NULL, "gpio_53",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A6, 52,
+		"gpmc_a6", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, NULL, "gpio_6",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, NULL, "gpio_5",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", NULL, NULL, "gpio_18",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D11, 57,
+		"gpmc_d11", NULL, NULL, "gpio_57",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D12, 77,
+		"gpmc_d12", NULL, NULL, "gpio_77",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D13, 76,
+		"gpmc_d13", NULL, NULL, "gpio_76",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D14, 55,
+		"gpmc_d14", NULL, NULL, "gpio_55",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D15, 54,
+		"gpmc_d15", NULL, NULL, "gpio_54",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", NULL, NULL, "gpio_19",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SCL, 50,
+		"i2c1_scl", NULL, NULL, "gpio_50",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SDA, 51,
+		"i2c1_sda", NULL, NULL, "gpio_51",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, NULL, "gpio_99",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, NULL, "gpio_100",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", "secure_indicator", NULL, "gpio_127",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
+		"spi2_cs1", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
+		"mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_DR, 144,
+		"mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
+		"mcbsp3_clkx", NULL, NULL, "gpio_71",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DR, 73,
+		"mcbsp3_dr", NULL, NULL, "gpio_73",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DX, 74,
+		"mcbsp3_dx", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
+		"mcbsp3_fsx", NULL, NULL, "gpio_72",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
+		"sdmmc1_clko", "ms_clko", NULL, NULL,
+		NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
+		"sdmmc1_cmd", "ms_bs", NULL, NULL,
+		NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
+		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
+		NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
+		"sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
+		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
+		NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
+		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
+		NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
+		"sdmmc2_clko", NULL, NULL, "gpio_13",
+		NULL, "spi3_clk", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
+		"sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
+		NULL, "spi3_simo", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
+		"sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
+		NULL, "spi3_somi", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
+		"sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
+		"sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
+		NULL, "spi3_cs1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
+		"sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
+		NULL, "spi3_cs0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_CKE1, 36,
+		"sdrc_cke1", NULL, NULL, "gpio_36",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS0, 84,
+		"spi1_cs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS1, 85,
+		"spi1_cs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS2, 86,
+		"spi1_cs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS3, 87,
+		"spi1_cs3", "spi2_cs1", NULL, "gpio_87",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CS0, 91,
+		"spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
+		"ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
+		"sys_clkout", NULL, NULL, "gpio_111",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
+		"sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
+		"sys_nirq0", NULL, NULL, "gpio_56",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
+		"sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
+		"mcbsp5_clkx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
+		"mcbsp5_fsx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
+		"mcbsp5_dr", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", "sdi_den", "dss_data20", "gpio_9",
+		"mcbsp5_dx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_CLK, 120,
+		"usb0hs_clk", NULL, NULL, "gpio_120",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
+		"usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
+		"usb0_txen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
+		"usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
+		"usb0_dat", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
+		"usb0hs_data2", "uart3_rts_sd", NULL, NULL,
+		"usb0_se0", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
+		"usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
+		"usb0_puen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
+		"usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
+		"usb0_vp", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
+		"usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
+		"usb0_vm", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
+		"usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
+		"usb0_rcv", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
+		"usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DIR, 121,
+		"usb0hs_dir", NULL, NULL, "gpio_121",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_NXT, 123,
+		"usb0hs_nxt", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_STP, 122,
+		"usb0hs_stp", NULL, NULL, "gpio_122",
+		NULL, NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for POP package
+ * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2430_pop_ball[] = {
+	_OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
+	_OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
+	_OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
+	_OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
+	_OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
+	_OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
+	_OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
+	_OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
+	_OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
+	_OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
+	_OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
+	_OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
+	_OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
+	_OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
+	_OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
+	_OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
+	_OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
+	_OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
+	_OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
+	_OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
+	_OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
+	_OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
+	_OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
+	_OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
+	_OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
+	_OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
+	_OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
+	_OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
+	_OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
+	_OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
+	_OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
+	_OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
+	_OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
+	_OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
+	_OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
+	_OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
+	_OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
+	_OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
+	_OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
+	_OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
+	_OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
+	_OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
+	_OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
+	_OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
+	_OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2430_pop_ball	 NULL
+#endif
+
+int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2430_pop_ball;
+		break;
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2430_CONTROL_PADCONF_MUX_SIZE,
+				omap2430_muxmodes, NULL, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
new file mode 100644
index 00000000000..adbea0d03e0
--- /dev/null
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -0,0 +1,370 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2430_CONTROL_PADCONF_MUX_PBASE			0x49002030LU
+
+#define OMAP2430_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x49002030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ *
+ * Note that these defines use SDMMC instead of MMC for compability
+ * with signal names used in 3630.
+ */
+#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET		0x001
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET		0x002
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET		0x003
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET		0x004
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET		0x005
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET		0x006
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET		0x007
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET		0x008
+#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x009
+#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET		0x00a
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET		0x00b
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x00c
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET		0x00d
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET		0x00e
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET		0x00f
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET		0x010
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET		0x011
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET		0x012
+#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET		0x013
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET		0x014
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET		0x015
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET		0x016
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET		0x017
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET		0x018
+#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET		0x019
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET		0x01a
+#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET		0x01b
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET		0x01c
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET		0x01d
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET		0x01e
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET		0x01f
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET		0x020
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET		0x021
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET		0x022
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET		0x023
+#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET		0x024
+#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET		0x025
+#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET		0x026
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET		0x027
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET		0x028
+#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET		0x029
+#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET		0x02a
+#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET			0x02b
+#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET			0x02c
+#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET			0x02d
+#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET			0x02e
+#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET			0x02f
+#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET			0x030
+#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET			0x031
+#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET			0x032
+#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET			0x033
+#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET			0x034
+#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET		0x035
+#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET		0x036
+#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET		0x037
+#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET		0x038
+#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET		0x039
+#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET		0x03a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET		0x03b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET		0x03c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET		0x03d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET		0x03e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET		0x03f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET		0x040
+#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET		0x041
+#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET		0x042
+#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET		0x043
+#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET		0x044
+#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET		0x045
+#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET		0x046
+#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET		0x047
+#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET		0x048
+#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET		0x049
+#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET		0x04a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET			0x04b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET			0x04c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET			0x04d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET			0x04e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET			0x04f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET			0x050
+#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET			0x051
+#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET			0x052
+#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET			0x053
+#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET			0x054
+#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET		0x055
+#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET			0x056
+#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET			0x057
+#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET			0x058
+#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET			0x059
+#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET			0x05a
+#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET			0x05b
+#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET			0x05c
+#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET			0x05d
+#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET			0x05e
+#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET		0x05f
+#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET		0x060
+#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET		0x061
+#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET		0x062
+#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET		0x063
+#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET		0x064
+#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET			0x065
+#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET			0x066
+#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET			0x067
+#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET			0x068
+#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET			0x069
+#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET			0x06a
+#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET			0x06b
+#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET			0x06c
+#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET			0x06d
+#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET			0x06e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET		0x06f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET		0x070
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET		0x071
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET		0x072
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET		0x073
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET		0x074
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET		0x075
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET		0x076
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET		0x077
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET		0x078
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET		0x079
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET		0x07a
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET		0x07b
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET		0x07c
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET		0x07d
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET		0x07e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET		0x07f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET		0x080
+#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET		0x081
+#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET		0x082
+#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET		0x083
+#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET		0x084
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET		0x085
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x086
+#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET		0x087
+#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET		0x088
+#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET		0x089
+#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET		0x08a
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET		0x08b
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x08c
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET		0x08d
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET		0x08e
+#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET		0x08f
+#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET		0x090
+#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET		0x091
+#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET		0x092
+#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET		0x093
+#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET			0x094
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET		0x095
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET		0x096
+#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET		0x097
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET		0x098
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET		0x099
+#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET		0x09a
+#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET		0x09b
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET		0x09c
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET		0x09d
+#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET		0x09e
+#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET		0x09f
+#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET		0x0a0
+#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET		0x0a1
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET		0x0a2
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET		0x0a3
+#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET			0x0a4
+#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET			0x0a5
+#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET			0x0a6
+#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET			0x0a7
+#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET			0x0a8
+#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET			0x0a9
+#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET			0x0aa
+#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ab
+#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET			0x0ac
+#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET			0x0ad
+#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET			0x0ae
+#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET			0x0af
+#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET		0x0b0
+#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET		0x0b1
+#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET			0x0b2
+#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET			0x0b3
+#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET		0x0b4
+#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET		0x0b5
+#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET		0x0b6
+#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET		0x0b7
+#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET		0x0b8
+#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET		0x0b9
+#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET		0x0ba
+#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET		0x0bb
+#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET		0x0bc
+#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET		0x0bd
+#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET		0x0be
+#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET		0x0bf
+#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET		0x0c0
+#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET		0x0c1
+#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET		0x0c2
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET		0x0c3
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET		0x0c4
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x0c5
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x0c6
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x0c7
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x0c8
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET		0x0c9
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x0ca
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET		0x0cb
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x0cc
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x0cd
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x0ce
+#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET		0x0cf
+#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET		0x0d0
+#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET		0x0d1
+#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET		0x0d2
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x0d3
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET		0x0d4
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET		0x0d5
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET		0x0d6
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET		0x0d7
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET		0x0d8
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET		0x0d9
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET		0x0da
+#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET			0x0db
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET		0x0dc
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET		0x0dd
+#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET		0x0de
+#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET		0x0df
+#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET		0x0e0
+#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET		0x0e1
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET		0x0e2
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET		0x0e3
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET		0x0e4
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET		0x0e5
+#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET		0x0e6
+#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET		0x0e7
+#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET		0x0e8
+#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET		0x0e9
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x0ea
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET		0x0eb
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET		0x0ec
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET		0x0ed
+#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET		0x0ee
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET		0x0ef
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x0f0
+#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET		0x0f1
+#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET		0x0f2
+#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET		0x0f3
+#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET		0x0f4
+#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x0f5
+#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x0f6
+#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x0f7
+#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x0f8
+#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x0f9
+#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET			0x0fa
+#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET			0x0fb
+#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET			0x0fc
+#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET			0x0fd
+#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET		0x0fe
+#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET		0x0ff
+#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET		0x100
+#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET		0x101
+#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET		0x102
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET		0x103
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET		0x104
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET		0x105
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET		0x106
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET		0x107
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET		0x108
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET		0x109
+#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET		0x10a
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET		0x10b
+#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET		0x10c
+#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET		0x10d
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET		0x10e
+#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET			0x10f
+#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET			0x110
+#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET			0x111
+#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET			0x112
+#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET		0x113
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET		0x114
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET		0x115
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET		0x116
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET		0x117
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET		0x118
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET		0x119
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET		0x11a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET		0x11b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET		0x11c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET		0x11d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET		0x11e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET		0x11f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET		0x120
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET		0x121
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET		0x122
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET		0x123
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET		0x124
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET		0x125
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET		0x126
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET		0x127
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET		0x128
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET		0x129
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET		0x12a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET		0x12b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET		0x12c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET		0x12d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET		0x12e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET		0x12f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET		0x130
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET		0x131
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET		0x132
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET		0x133
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET		0x134
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET		0x135
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET		0x136
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET		0x137
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET		0x138
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET		0x139
+#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET		0x13a
+#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET		0x13b
+#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET		0x13c
+#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET		0x13d
+#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET		0x13e
+#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET		0x13f
+#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET		0x140
+#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET		0x141
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET		0x142
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET		0x143
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET		0x144
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET		0x145
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET		0x146
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET		0x147
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET		0x148
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET		0x149
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET		0x14a
+#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET		0x14b
+#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET		0x14c
+#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET		0x14d
+#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET		0x14e
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET		0x14f
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET		0x150
+#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET		0x151
+#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET		0x152
+#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET		0x153
+
+#define OMAP2430_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 2ff4dce95ee..f64d7eea345 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -2032,19 +2032,19 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 	struct omap_ball *package_balls;
 
 	switch (flags & OMAP_PACKAGE_MASK) {
-	case (OMAP_PACKAGE_CBC):
+	case OMAP_PACKAGE_CBC:
 		package_subset = omap3_cbc_subset;
 		package_balls = omap3_cbc_ball;
 		break;
-	case (OMAP_PACKAGE_CBB):
+	case OMAP_PACKAGE_CBB:
 		package_subset = omap3_cbb_subset;
 		package_balls = omap3_cbb_ball;
 		break;
-	case (OMAP_PACKAGE_CUS):
+	case OMAP_PACKAGE_CUS:
 		package_subset = omap3_cus_subset;
 		package_balls = omap3_cus_ball;
 		break;
-	case (OMAP_PACKAGE_CBP):
+	case OMAP_PACKAGE_CBP:
 		package_subset = omap36xx_cbp_subset;
 		package_balls = omap36xx_cbp_ball;
 		break;
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index ef0e7a00dd6..6ae937a06cc 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -47,19 +47,3 @@ hold:	ldr	r12,=0x103
 	b	secondary_startup
 END(omap_secondary_startup)
 
-
-ENTRY(omap_modify_auxcoreboot0)
-	stmfd   sp!, {r1-r12, lr}
-	ldr	r12, =0x104
-	dsb
-	smc	#0
-	ldmfd   sp!, {r1-r12, pc}
-END(omap_modify_auxcoreboot0)
-
-ENTRY(omap_auxcoreboot_addr)
-	stmfd   sp!, {r2-r12, lr}
-	ldr	r12, =0x105
-	dsb
-	smc	#0
-	ldmfd   sp!, {r2-r12, pc}
-END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
new file mode 100644
index 00000000000..6cee456ca54
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -0,0 +1,79 @@
+/*
+ * OMAP4 SMP cpu-hotplug support
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+#include <mach/omap4-common.h>
+
+static DECLARE_COMPLETION(cpu_killed);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		pr_crit("platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+	flush_cache_all();
+	dsb();
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+		printk(KERN_CRIT "Secure clear status failed\n");
+
+	for (;;) {
+		/*
+		 * Execute WFI
+		 */
+		do_wfi();
+
+		if (omap_read_auxcoreboot0() == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+		pr_debug("CPU%u: spurious wakeup call\n", cpu);
+	}
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index eb9bee73e0c..f5a1aad1a5c 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -59,7 +59,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
 	{
 		.base = OMAP4_MMU1_BASE,
-		.irq = INT_44XX_DUCATI_MMU_IRQ,
+		.irq = OMAP44XX_IRQ_DUCATI_MMU,
 		.pdata = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 1cf52313759..af3c20c8d3f 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -73,9 +73,10 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	omap_modify_auxcoreboot0(0x200, 0x0);
+	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	flush_cache_all();
 	smp_wmb();
+	smp_cross_call(cpumask_of(cpu));
 
 	/*
 	 * Now the secondary core is starting up let it run its
diff --git a/arch/arm/mach-omap2/omap44xx-smc.S b/arch/arm/mach-omap2/omap44xx-smc.S
index f61c7771ca4..1980dc31a1a 100644
--- a/arch/arm/mach-omap2/omap44xx-smc.S
+++ b/arch/arm/mach-omap2/omap44xx-smc.S
@@ -30,3 +30,28 @@ ENTRY(omap_smc1)
 	smc	#0
 	ldmfd   sp!, {r2-r12, pc}
 END(omap_smc1)
+
+ENTRY(omap_modify_auxcoreboot0)
+	stmfd   sp!, {r1-r12, lr}
+	ldr	r12, =0x104
+	dsb
+	smc	#0
+	ldmfd   sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x105
+	dsb
+	smc	#0
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
+
+ENTRY(omap_read_auxcoreboot0)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x103
+	dsb
+	smc	#0
+	mov	r0, r0, lsr #9
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_read_auxcoreboot0)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index b7a4133267d..cb911d7d1a3 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod implementation for OMAP2/3/4
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley, Benoît Cousson, Kevin Hilman
  *
@@ -423,7 +423,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
 }
 
 /**
- * _init_interface_clk - get a struct clk * for the the hwmod's interface clks
+ * _init_interface_clks - get a struct clk * for the the hwmod's interface clks
  * @oh: struct omap_hwmod *
  *
  * Called from _init_clocks().  Populates the @oh OCP slave interface
@@ -764,6 +764,7 @@ static struct omap_hwmod *_lookup(const char *name)
 /**
  * _init_clocks - clk_get() all clocks associated with this hwmod
  * @oh: struct omap_hwmod *
+ * @data: not used; pass NULL
  *
  * Called by omap_hwmod_late_init() (after omap2_clk_init()).
  * Resolves all clock names embedded in the hwmod.  Must be called
@@ -771,7 +772,7 @@ static struct omap_hwmod *_lookup(const char *name)
  * has not yet been registered or if the clocks have already been
  * initialized, 0 on success, or a non-zero error on failure.
  */
-static int _init_clocks(struct omap_hwmod *oh)
+static int _init_clocks(struct omap_hwmod *oh, void *data)
 {
 	int ret = 0;
 
@@ -886,7 +887,7 @@ static int _reset(struct omap_hwmod *oh)
 }
 
 /**
- * _enable - enable an omap_hwmod
+ * _omap_hwmod_enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
@@ -894,7 +895,7 @@ static int _reset(struct omap_hwmod *oh)
  * Returns -EINVAL if the hwmod is in the wrong state or passes along
  * the return value of _wait_target_ready().
  */
-static int _enable(struct omap_hwmod *oh)
+int _omap_hwmod_enable(struct omap_hwmod *oh)
 {
 	int r;
 
@@ -939,7 +940,7 @@ static int _enable(struct omap_hwmod *oh)
  * no further work.  Returns -EINVAL if the hwmod is in the wrong
  * state or returns 0.
  */
-static int _idle(struct omap_hwmod *oh)
+int _omap_hwmod_idle(struct omap_hwmod *oh)
 {
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
@@ -996,19 +997,25 @@ static int _shutdown(struct omap_hwmod *oh)
 /**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
+ * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
  *
  * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex
- * held.  Returns -EINVAL if the hwmod is in the wrong state or returns
- * 0.
+ * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex held.
+ * @skip_setup_idle is intended to be used on a system that will not
+ * call omap_hwmod_enable() to enable devices (e.g., a system without
+ * PM runtime).  Returns -EINVAL if the hwmod is in the wrong state or
+ * returns 0.
  */
-static int _setup(struct omap_hwmod *oh)
+static int _setup(struct omap_hwmod *oh, void *data)
 {
 	int i, r;
+	u8 skip_setup_idle;
 
-	if (!oh)
+	if (!oh || !data)
 		return -EINVAL;
 
+	skip_setup_idle = *(u8 *)data;
+
 	/* Set iclk autoidle mode */
 	if (oh->slaves_cnt > 0) {
 		for (i = 0; i < oh->slaves_cnt; i++) {
@@ -1029,7 +1036,7 @@ static int _setup(struct omap_hwmod *oh)
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-	r = _enable(oh);
+	r = _omap_hwmod_enable(oh);
 	if (r) {
 		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
 			   oh->name, oh->_state);
@@ -1041,7 +1048,7 @@ static int _setup(struct omap_hwmod *oh)
 		 * XXX Do the OCP_SYSCONFIG bits need to be
 		 * reprogrammed after a reset?  If not, then this can
 		 * be removed.  If they do, then probably the
-		 * _enable() function should be split to avoid the
+		 * _omap_hwmod_enable() function should be split to avoid the
 		 * rewrite of the OCP_SYSCONFIG register.
 		 */
 		if (oh->class->sysc) {
@@ -1050,8 +1057,8 @@ static int _setup(struct omap_hwmod *oh)
 		}
 	}
 
-	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
-		_idle(oh);
+	if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle)
+		_omap_hwmod_idle(oh);
 
 	return 0;
 }
@@ -1062,14 +1069,29 @@ static int _setup(struct omap_hwmod *oh)
 
 u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs)
 {
-	return __raw_readl(oh->_rt_va + reg_offs);
+	return __raw_readl(oh->_mpu_rt_va + reg_offs);
 }
 
 void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs)
 {
-	__raw_writel(v, oh->_rt_va + reg_offs);
+	__raw_writel(v, oh->_mpu_rt_va + reg_offs);
 }
 
+/**
+ * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode
+ * @oh: struct omap_hwmod *
+ * @idlemode: SIDLEMODE field bits (shifted to bit 0)
+ *
+ * Sets the IP block's OCP slave idlemode in hardware, and updates our
+ * local copy.  Intended to be used by drivers that have some erratum
+ * that requires direct manipulation of the SIDLEMODE bits.  Returns
+ * -EINVAL if @oh is null, or passes along the return value from
+ * _set_slave_idlemode().
+ *
+ * XXX Does this function have any current users?  If not, we should
+ * remove it; it is better to let the rest of the hwmod code handle this.
+ * Any users of this function should be scrutinized carefully.
+ */
 int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
 {
 	u32 v;
@@ -1124,7 +1146,7 @@ int omap_hwmod_register(struct omap_hwmod *oh)
 	ms_id = _find_mpu_port_index(oh);
 	if (!IS_ERR_VALUE(ms_id)) {
 		oh->_mpu_port_index = ms_id;
-		oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
 	} else {
 		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
 	}
@@ -1164,6 +1186,7 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name)
 /**
  * omap_hwmod_for_each - call function for each registered omap_hwmod
  * @fn: pointer to a callback function
+ * @data: void * data to pass to callback function
  *
  * Call @fn for each registered omap_hwmod, passing @data to each
  * function.  @fn must return 0 for success or any other value for
@@ -1172,7 +1195,8 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name)
  * caller of omap_hwmod_for_each().  @fn is called with
  * omap_hwmod_for_each() held.
  */
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+			void *data)
 {
 	struct omap_hwmod *temp_oh;
 	int ret;
@@ -1182,7 +1206,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh))
 
 	mutex_lock(&omap_hwmod_mutex);
 	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
-		ret = (*fn)(temp_oh);
+		ret = (*fn)(temp_oh, data);
 		if (ret)
 			break;
 	}
@@ -1229,24 +1253,28 @@ int omap_hwmod_init(struct omap_hwmod **ohs)
 
 /**
  * omap_hwmod_late_init - do some post-clock framework initialization
+ * @skip_setup_idle: if 1, do not idle hwmods in _setup()
  *
  * Must be called after omap2_clk_init().  Resolves the struct clk names
  * to struct clk pointers for each registered omap_hwmod.  Also calls
  * _setup() on each hwmod.  Returns 0.
  */
-int omap_hwmod_late_init(void)
+int omap_hwmod_late_init(u8 skip_setup_idle)
 {
 	int r;
 
 	/* XXX check return value */
-	r = omap_hwmod_for_each(_init_clocks);
+	r = omap_hwmod_for_each(_init_clocks, NULL);
 	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
 
 	mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME);
 	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
 	     MPU_INITIATOR_NAME);
 
-	omap_hwmod_for_each(_setup);
+	if (skip_setup_idle)
+		pr_debug("omap_hwmod: will leave hwmods enabled during setup\n");
+
+	omap_hwmod_for_each(_setup, &skip_setup_idle);
 
 	return 0;
 }
@@ -1270,7 +1298,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
-	iounmap(oh->_rt_va);
+	iounmap(oh->_mpu_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
@@ -1292,12 +1320,13 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
 		return -EINVAL;
 
 	mutex_lock(&omap_hwmod_mutex);
-	r = _enable(oh);
+	r = _omap_hwmod_enable(oh);
 	mutex_unlock(&omap_hwmod_mutex);
 
 	return r;
 }
 
+
 /**
  * omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -1311,7 +1340,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
 		return -EINVAL;
 
 	mutex_lock(&omap_hwmod_mutex);
-	_idle(oh);
+	_omap_hwmod_idle(oh);
 	mutex_unlock(&omap_hwmod_mutex);
 
 	return 0;
@@ -1413,7 +1442,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
 	mutex_lock(&omap_hwmod_mutex);
 	r = _reset(oh);
 	if (!r)
-		r = _enable(oh);
+		r = _omap_hwmod_enable(oh);
 	mutex_unlock(&omap_hwmod_mutex);
 
 	return r;
@@ -1530,6 +1559,29 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 }
 
 /**
+ * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the virtual address corresponding to the beginning of the
+ * module's register target, in the address range that is intended to
+ * be used by the MPU.  Returns the virtual address upon success or NULL
+ * upon error.
+ */
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return NULL;
+
+	if (oh->_state == _HWMOD_STATE_UNKNOWN)
+		return NULL;
+
+	return oh->_mpu_rt_va;
+}
+
+/**
  * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh
  * @oh: struct omap_hwmod *
  * @init_oh: struct omap_hwmod * (initiator)
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index e5530c51f77..3cc768e8bc0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -30,42 +30,44 @@
  */
 
 static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_l3_hwmod;
+static struct omap_hwmod omap2420_iva_hwmod;
+static struct omap_hwmod omap2420_l3_main_hwmod;
 static struct omap_hwmod omap2420_l4_core_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3__l4_core = {
-	.master	= &omap2420_l3_hwmod,
+static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
+	.master	= &omap2420_l3_main_hwmod,
 	.slave	= &omap2420_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = {
 	.master = &omap2420_mpu_hwmod,
-	.slave	= &omap2420_l3_hwmod,
+	.slave	= &omap2420_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = {
-	&omap2420_mpu__l3,
+static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
+	&omap2420_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = {
-	&omap2420_l3__l4_core,
+static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
+	&omap2420_l3_main__l4_core,
 };
 
 /* L3 */
-static struct omap_hwmod omap2420_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap2420_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap2420_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2420_l3_masters),
-	.slaves		= omap2420_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.masters	= omap2420_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_l3_main_masters),
+	.slaves		= omap2420_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap2420_l4_wkup_hwmod;
@@ -79,7 +81,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
 
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
-	&omap2420_l3__l4_core,
+	&omap2420_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -89,13 +91,14 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
 
 /* L4 CORE */
 static struct omap_hwmod omap2420_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2420_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_l4_core_masters),
 	.slaves		= omap2420_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
@@ -109,18 +112,19 @@ static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap2420_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2420_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2420_l4_wkup_masters),
 	.slaves		= omap2420_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2420_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
-	&omap2420_mpu__l3,
+	&omap2420_mpu__l3_main,
 };
 
 /* MPU */
@@ -133,11 +137,40 @@ static struct omap_hwmod omap2420_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
+/*
+ * IVA1 interface data
+ */
+
+/* IVA <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__iva = {
+	.master		= &omap2420_l3_main_hwmod,
+	.slave		= &omap2420_iva_hwmod,
+	.clk		= "iva1_ifck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = {
+	&omap2420_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap2420_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap2420_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
-	&omap2420_l3_hwmod,
+	&omap2420_l3_main_hwmod,
 	&omap2420_l4_core_hwmod,
 	&omap2420_l4_wkup_hwmod,
 	&omap2420_mpu_hwmod,
+	&omap2420_iva_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 0852d954da4..4526628ed28 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -30,47 +30,47 @@
  */
 
 static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_l3_hwmod;
+static struct omap_hwmod omap2430_iva_hwmod;
+static struct omap_hwmod omap2430_l3_main_hwmod;
 static struct omap_hwmod omap2430_l4_core_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3__l4_core = {
-	.master	= &omap2430_l3_hwmod,
+static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
+	.master	= &omap2430_l3_main_hwmod,
 	.slave	= &omap2430_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = {
 	.master = &omap2430_mpu_hwmod,
-	.slave	= &omap2430_l3_hwmod,
+	.slave	= &omap2430_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = {
-	&omap2430_mpu__l3,
+static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = {
+	&omap2430_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = {
-	&omap2430_l3__l4_core,
+static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = {
+	&omap2430_l3_main__l4_core,
 };
 
 /* L3 */
-static struct omap_hwmod omap2430_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap2430_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap2430_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap2430_l3_masters),
-	.slaves		= omap2430_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.masters	= omap2430_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_l3_main_masters),
+	.slaves		= omap2430_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@@ -81,7 +81,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
 
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
-	&omap2430_l3__l4_core,
+	&omap2430_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -91,13 +91,14 @@ static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
 
 /* L4 CORE */
 static struct omap_hwmod omap2430_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2430_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_l4_core_masters),
 	.slaves		= omap2430_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
@@ -111,18 +112,19 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap2430_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap2430_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap2430_l4_wkup_masters),
 	.slaves		= omap2430_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap2430_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
-	&omap2430_mpu__l3,
+	&omap2430_mpu__l3_main,
 };
 
 /* MPU */
@@ -135,11 +137,40 @@ static struct omap_hwmod omap2430_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/*
+ * IVA2_1 interface data
+ */
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap2430_l3__iva = {
+	.master		= &omap2430_l3_main_hwmod,
+	.slave		= &omap2430_iva_hwmod,
+	.clk		= "dsp_fck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = {
+	&omap2430_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap2430_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap2430_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
-	&omap2430_l3_hwmod,
+	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
 	&omap2430_l4_wkup_hwmod,
 	&omap2430_mpu_hwmod,
+	&omap2430_iva_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 39b0c0eaa37..5d8eb58ba5e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -32,51 +32,53 @@
  */
 
 static struct omap_hwmod omap3xxx_mpu_hwmod;
-static struct omap_hwmod omap3xxx_l3_hwmod;
+static struct omap_hwmod omap3xxx_iva_hwmod;
+static struct omap_hwmod omap3xxx_l3_main_hwmod;
 static struct omap_hwmod omap3xxx_l4_core_hwmod;
 static struct omap_hwmod omap3xxx_l4_per_hwmod;
 
 /* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = {
-	.master	= &omap3xxx_l3_hwmod,
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
+	.master	= &omap3xxx_l3_main_hwmod,
 	.slave	= &omap3xxx_l4_core_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = {
-	.master = &omap3xxx_l3_hwmod,
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
+	.master = &omap3xxx_l3_main_hwmod,
 	.slave	= &omap3xxx_l4_per_hwmod,
 	.user	= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = {
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
 	.master = &omap3xxx_mpu_hwmod,
-	.slave	= &omap3xxx_l3_hwmod,
+	.slave	= &omap3xxx_l3_main_hwmod,
 	.user	= OCP_USER_MPU,
 };
 
 /* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = {
-	&omap3xxx_mpu__l3,
+static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = {
+	&omap3xxx_mpu__l3_main,
 };
 
 /* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = {
-	&omap3xxx_l3__l4_core,
-	&omap3xxx_l3__l4_per,
+static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = {
+	&omap3xxx_l3_main__l4_core,
+	&omap3xxx_l3_main__l4_per,
 };
 
 /* L3 */
-static struct omap_hwmod omap3xxx_l3_hwmod = {
-	.name		= "l3_hwmod",
+static struct omap_hwmod omap3xxx_l3_main_hwmod = {
+	.name		= "l3_main",
 	.class		= &l3_hwmod_class,
-	.masters	= omap3xxx_l3_masters,
-	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_masters),
-	.slaves		= omap3xxx_l3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.masters	= omap3xxx_l3_main_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_l3_main_masters),
+	.slaves		= omap3xxx_l3_main_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l3_main_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
@@ -90,7 +92,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
 
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
-	&omap3xxx_l3__l4_core,
+	&omap3xxx_l3_main__l4_core,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -100,18 +102,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
 
 /* L4 CORE */
 static struct omap_hwmod omap3xxx_l4_core_hwmod = {
-	.name		= "l4_core_hwmod",
+	.name		= "l4_core",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_core_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_core_masters),
 	.slaves		= omap3xxx_l4_core_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_core_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_PER interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
-	&omap3xxx_l3__l4_per,
+	&omap3xxx_l3_main__l4_per,
 };
 
 /* Master interfaces on the L4_PER interconnect */
@@ -120,13 +123,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = {
 
 /* L4 PER */
 static struct omap_hwmod omap3xxx_l4_per_hwmod = {
-	.name		= "l4_per_hwmod",
+	.name		= "l4_per",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_per_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_per_masters),
 	.slaves		= omap3xxx_l4_per_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_per_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Slave interfaces on the L4_WKUP interconnect */
@@ -140,18 +144,19 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = {
 
 /* L4 WKUP */
 static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
-	.name		= "l4_wkup_hwmod",
+	.name		= "l4_wkup",
 	.class		= &l4_hwmod_class,
 	.masters	= omap3xxx_l4_wkup_masters,
 	.masters_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_masters),
 	.slaves		= omap3xxx_l4_wkup_slaves,
 	.slaves_cnt	= ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* Master interfaces on the MPU device */
 static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
-	&omap3xxx_mpu__l3,
+	&omap3xxx_mpu__l3_main,
 };
 
 /* MPU */
@@ -164,12 +169,41 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
 
+/*
+ * IVA2_2 interface data
+ */
+
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
+	.master		= &omap3xxx_l3_main_hwmod,
+	.slave		= &omap3xxx_iva_hwmod,
+	.clk		= "iva2_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = {
+	&omap3xxx_l3__iva,
+};
+
+/*
+ * IVA2 (IVA2)
+ */
+
+static struct omap_hwmod omap3xxx_iva_hwmod = {
+	.name		= "iva",
+	.class		= &iva_hwmod_class,
+	.masters	= omap3xxx_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
-	&omap3xxx_l3_hwmod,
+	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
 	&omap3xxx_l4_per_hwmod,
 	&omap3xxx_l4_wkup_hwmod,
 	&omap3xxx_mpu_hwmod,
+	&omap3xxx_iva_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 1e80b914fa1..08a134243ec 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -66,3 +66,6 @@ struct omap_hwmod_class mpu_hwmod_class = {
 	.name = "mpu"
 };
 
+struct omap_hwmod_class iva_hwmod_class = {
+	.name = "iva"
+};
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h
index 3645a28c7c2..c34e98bf124 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.h
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h
@@ -20,5 +20,6 @@
 extern struct omap_hwmod_class l3_hwmod_class;
 extern struct omap_hwmod_class l4_hwmod_class;
 extern struct omap_hwmod_class mpu_hwmod_class;
+extern struct omap_hwmod_class iva_hwmod_class;
 
 #endif
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
new file mode 100644
index 00000000000..68f9f2e9589
--- /dev/null
+++ b/arch/arm/mach-omap2/pm.c
@@ -0,0 +1,84 @@
+/*
+ * pm.c - Common OMAP2+ power management-related code
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <plat/omap-pm.h>
+#include <plat/omap_device.h>
+#include <plat/common.h>
+
+static struct omap_device_pm_latency *pm_lats;
+
+static struct device *mpu_dev;
+static struct device *dsp_dev;
+static struct device *l3_dev;
+
+struct device *omap2_get_mpuss_device(void)
+{
+	WARN_ON_ONCE(!mpu_dev);
+	return mpu_dev;
+}
+
+struct device *omap2_get_dsp_device(void)
+{
+	WARN_ON_ONCE(!dsp_dev);
+	return dsp_dev;
+}
+
+struct device *omap2_get_l3_device(void)
+{
+	WARN_ON_ONCE(!l3_dev);
+	return l3_dev;
+}
+
+/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
+static int _init_omap_device(char *name, struct device **new_dev)
+{
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+
+	oh = omap_hwmod_lookup(name);
+	if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+		 __func__, name))
+		return -ENODEV;
+
+	od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+	if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+		 __func__, name))
+		return -ENODEV;
+
+	*new_dev = &od->pdev.dev;
+
+	return 0;
+}
+
+/*
+ * Build omap_devices for processors and bus.
+ */
+static void omap2_init_processor_devices(void)
+{
+	_init_omap_device("mpu", &mpu_dev);
+	_init_omap_device("iva", &dsp_dev);
+	_init_omap_device("l3_main", &l3_dev);
+}
+
+static int __init omap2_common_pm_init(void)
+{
+	omap2_init_processor_devices();
+	omap_pm_if_init();
+
+	return 0;
+}
+device_initcall(omap2_common_pm_init);
+
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index e321281ab6e..6aeedeacdad 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -39,7 +39,6 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/control.h>
-#include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b88737fd6cf..fb4994ad622 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -385,8 +385,9 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (per_next_state < PWRDM_POWER_ON ||
-			core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() && \
+			(per_next_state < PWRDM_POWER_ON ||
+			core_next_state < PWRDM_POWER_ON)) {
 		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
@@ -479,7 +480,7 @@ void omap_sram_idle(void)
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) {
 		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
new file mode 100644
index 00000000000..54544b4fc76
--- /dev/null
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -0,0 +1,135 @@
+/*
+ * OMAP4 Power Management Routines
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <plat/powerdomain.h>
+#include <mach/omap4-common.h>
+
+struct power_state {
+	struct powerdomain *pwrdm;
+	u32 next_state;
+#ifdef CONFIG_SUSPEND
+	u32 saved_state;
+#endif
+	struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+#ifdef CONFIG_SUSPEND
+static int omap4_pm_prepare(void)
+{
+	disable_hlt();
+	return 0;
+}
+
+static int omap4_pm_suspend(void)
+{
+	do_wfi();
+	return 0;
+}
+
+static int omap4_pm_enter(suspend_state_t suspend_state)
+{
+	int ret = 0;
+
+	switch (suspend_state) {
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		ret = omap4_pm_suspend();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void omap4_pm_finish(void)
+{
+	enable_hlt();
+	return;
+}
+
+static int omap4_pm_begin(suspend_state_t state)
+{
+	return 0;
+}
+
+static void omap4_pm_end(void)
+{
+	return;
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap4_pm_begin,
+	.end		= omap4_pm_end,
+	.prepare	= omap4_pm_prepare,
+	.enter		= omap4_pm_enter,
+	.finish		= omap4_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+#endif /* CONFIG_SUSPEND */
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
+{
+	struct power_state *pwrst;
+
+	if (!pwrdm->pwrsts)
+		return 0;
+
+	pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
+	if (!pwrst)
+		return -ENOMEM;
+	pwrst->pwrdm = pwrdm;
+	pwrst->next_state = PWRDM_POWER_ON;
+	list_add(&pwrst->node, &pwrst_list);
+
+	return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
+}
+
+/**
+ * omap4_pm_init - Init routine for OMAP4 PM
+ *
+ * Initializes all powerdomain and clockdomain target states
+ * and all PRCM settings.
+ */
+static int __init omap4_pm_init(void)
+{
+	int ret;
+
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	pr_err("Power Management for TI OMAP4.\n");
+
+#ifdef CONFIG_PM
+	ret = pwrdm_for_each(pwrdms_setup, NULL);
+	if (ret) {
+		pr_err("Failed to setup powerdomains\n");
+		goto err2;
+	}
+#endif
+
+#ifdef CONFIG_SUSPEND
+	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
+
+err2:
+	return ret;
+}
+late_initcall(omap4_pm_init);
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index a2904aa7065..6527ec30dc1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -875,6 +875,7 @@ int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
 		break;
 	case 4:
 		m = OMAP_MEM4_RETSTATE_MASK;
+		break;
 	default:
 		WARN_ON(1); /* should never happen */
 		return -EEXIST;
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index bd87112beea..fa904861668 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -75,12 +75,19 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 	},
 };
 
+/*
+ * The USBTLL Save-and-Restore mechanism is broken on
+ * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * needs to be disabled on these chips.
+ * Refer: 3430 errata ID i459 and 3630 errata ID i579
+ */
 static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
 					   CHIP_IS_OMAP3430ES2 |
-					   CHIP_IS_OMAP3430ES3_0),
+					   CHIP_IS_OMAP3430ES3_0 |
+					   CHIP_IS_OMAP3630ES1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 2,
@@ -97,7 +104,8 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 static struct powerdomain core_3xxx_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = CORE_MOD,
-	.omap_chip	  = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3_1),
+	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
+					  CHIP_GE_OMAP3630ES1_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3771254dfa8..566e991ede8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -37,6 +37,9 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
+#define UART_ERRATA_FIFO_FULL_ABORT	(0x1 << 0)
+#define UART_ERRATA_i202_MDR1_ACCESS	(0x1 << 1)
+
 /*
  * NOTE: By default the serial timeout is disabled as it causes lost characters
  * over the serial ports. This means that the UART clocks will stay on until
@@ -64,6 +67,7 @@ struct omap_uart_state {
 	struct list_head node;
 	struct platform_device pdev;
 
+	u32 errata;
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
 
@@ -74,6 +78,7 @@ struct omap_uart_state {
 	u16 sysc;
 	u16 scr;
 	u16 wer;
+	u16 mcr;
 #endif
 };
 
@@ -180,6 +185,42 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
+/*
+ * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6)
+ * The access to uart register after MDR1 Access
+ * causes UART to corrupt data.
+ *
+ * Need a delay =
+ * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS)
+ * give 10 times as much
+ */
+static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
+		u8 fcr_val)
+{
+	struct plat_serial8250_port *p = uart->p;
+	u8 timeout = 255;
+
+	serial_write_reg(p, UART_OMAP_MDR1, mdr1_val);
+	udelay(2);
+	serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
+			UART_FCR_CLEAR_RCVR);
+	/*
+	 * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
+	 * TX_FIFO_E bit is 1.
+	 */
+	while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) &
+				(UART_LSR_THRE | UART_LSR_DR))) {
+		timeout--;
+		if (!timeout) {
+			/* Should *never* happen. we warn and carry on */
+			dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n",
+				serial_read_reg(p, UART_LSR));
+			break;
+		}
+		udelay(1);
+	}
+}
+
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
@@ -197,6 +238,9 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
 	uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
 	uart->scr = serial_read_reg(p, UART_OMAP_SCR);
 	uart->wer = serial_read_reg(p, UART_OMAP_WER);
+	serial_write_reg(p, UART_LCR, 0x80);
+	uart->mcr = serial_read_reg(p, UART_MCR);
+	serial_write_reg(p, UART_LCR, lcr);
 
 	uart->context_valid = 1;
 }
@@ -214,7 +258,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 
 	uart->context_valid = 0;
 
-	serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
+		omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+	else
+		serial_write_reg(p, UART_OMAP_MDR1, 0x7);
 	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
 	efr = serial_read_reg(p, UART_EFR);
 	serial_write_reg(p, UART_EFR, UART_EFR_ECB);
@@ -225,14 +272,18 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 	serial_write_reg(p, UART_DLM, uart->dlh);
 	serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
 	serial_write_reg(p, UART_IER, uart->ier);
-	serial_write_reg(p, UART_FCR, 0xA1);
+	serial_write_reg(p, UART_LCR, 0x80);
+	serial_write_reg(p, UART_MCR, uart->mcr);
 	serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
 	serial_write_reg(p, UART_EFR, efr);
 	serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
 	serial_write_reg(p, UART_OMAP_SCR, uart->scr);
 	serial_write_reg(p, UART_OMAP_WER, uart->wer);
 	serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
-	serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
+		omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+	else
+		serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -489,8 +540,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		}
 		uart->wk_mask = wk_mask;
 	} else {
-		uart->wk_en = 0;
-		uart->wk_st = 0;
+		uart->wk_en = NULL;
+		uart->wk_st = NULL;
 		uart->wk_mask = 0;
 		uart->padconf = 0;
 	}
@@ -552,7 +603,8 @@ static ssize_t sleep_timeout_store(struct device *dev,
 	return n;
 }
 
-DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
+		sleep_timeout_store);
 #define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
@@ -749,14 +801,20 @@ void __init omap_serial_init_port(int port)
 	 * omap3xxx: Never read empty UART fifo on UARTs
 	 * with IP rev >=0x52
 	 */
-	if (cpu_is_omap44xx()) {
-		uart->p->serial_in = serial_in_override;
-		uart->p->serial_out = serial_out_override;
-	} else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
-			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
+	if (cpu_is_omap44xx())
+		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+	else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
+
+	if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
 		uart->p->serial_in = serial_in_override;
 		uart->p->serial_out = serial_out_override;
 	}
+
+	/* Enable the MDR1 errata for OMAP3 */
+	if (cpu_is_omap34xx())
+		uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index d72d1ac3033..b11bf385d36 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -23,7 +23,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
-#include <plat/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c
new file mode 100644
index 00000000000..a216d88b04b
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-fs.c
@@ -0,0 +1,359 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/irq.h>
+
+#include <plat/control.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+
+#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
+#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
+#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
+#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
+#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
+
+#include "mux.h"
+
+#if defined(CONFIG_ARCH_OMAP2)
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	pdata->ohci_device = &ohci_device;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+static void omap2_usb_devconf_clear(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb_devconf_set(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_disable_5pinbitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_enable_5pinunitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static u32 __init omap2_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
+
+	if (nwires == 0)
+		return 0;
+
+	if (is_device)
+		omap_mux_init_signal("usb0_puen", 0);
+
+	omap_mux_init_signal("usb0_dat", 0);
+	omap_mux_init_signal("usb0_txen", 0);
+	omap_mux_init_signal("usb0_se0", 0);
+	if (nwires != 3)
+		omap_mux_init_signal("usb0_rcv", 0);
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(0, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(0, USB_BIDIR);
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_mux_init_signal("usb0_vp", 0);
+		omap_mux_init_signal("usb0_vm", 0);
+		omap2_usb_devconf_set(0, USB_UNIDIR);
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+static u32 __init omap2_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
+
+	if (nwires == 0)
+		return 0;
+
+	/* NOTE:  board-specific code must set up pin muxing for usb1,
+	 * since each signal could come out on either of two balls.
+	 */
+
+	switch (nwires) {
+	case 2:
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
+		break;
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(1, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(1, USB_BIDIR);
+		break;
+	case 6:
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+static u32 __init omap2_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	omap2_usb2_disable_5pinbitll();
+	alt_pingroup = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	omap_mux_init_signal("usb2_dat", 0);
+	omap_mux_init_signal("usb2_se0", 0);
+	if (nwires > 2)
+		omap_mux_init_signal("usb2_txen", 0);
+	if (nwires > 3)
+		omap_mux_init_signal("usb2_rcv", 0);
+
+	switch (nwires) {
+	case 2:
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
+		break;
+	case 3:
+		syscon1 = 2;
+		omap2_usb_devconf_set(2, USB_BIDIR);
+		break;
+	case 4:
+		syscon1 = 1;
+		omap2_usb_devconf_set(2, USB_BIDIR);
+		break;
+	case 5:
+		/* NOTE: board-specific code must mux this setting depending
+		 * on TLL link using DP/DM.  Something must also
+		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+		 * 2420: hdq_sio.usb2_tllse0 or vlynq_rx0.usb2_tllse0
+		 * 2430: hdq_sio.usb2_tllse0 or sdmmc2_dat0.usb2_tllse0
+		 */
+
+		syscon1 = 3;
+		omap2_usb2_enable_5pinunitll();
+		break;
+	case 6:
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+void __init omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+	struct clk *ick;
+
+	if (!cpu_is_omap24xx())
+		return;
+
+	ick = clk_get(NULL, "usb_l4_ick");
+	if (IS_ERR(ick))
+		return;
+
+	clk_enable(ick);
+	pdata->usb0_init = omap2_usb0_init;
+	pdata->usb1_init = omap2_usb1_init;
+	pdata->usb2_init = omap2_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+	omap_otg_init(pdata);
+	clk_disable(ick);
+	clk_put(ick);
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 96f6787e00b..33a5cde1c22 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,7 +28,6 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 10a2013c110..64a0112b70a 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -17,8 +17,8 @@
 #include <linux/usb/musb.h>
 
 #include <plat/gpmc.h>
-#include <plat/mux.h>
 
+#include "mux.h"
 
 static u8		async_cs, sync_cs;
 static unsigned		refclk_psec;
@@ -325,17 +325,17 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
 	else {
 		/* assume OMAP 2420 ES2.0 and later */
 		if (dmachan & (1 << 0))
-			omap_cfg_reg(AA10_242X_DMAREQ0);
+			omap_mux_init_signal("sys_ndmareq0", 0);
 		if (dmachan & (1 << 1))
-			omap_cfg_reg(AA6_242X_DMAREQ1);
+			omap_mux_init_signal("sys_ndmareq1", 0);
 		if (dmachan & (1 << 2))
-			omap_cfg_reg(E4_242X_DMAREQ2);
+			omap_mux_init_signal("sys_ndmareq2", 0);
 		if (dmachan & (1 << 3))
-			omap_cfg_reg(G4_242X_DMAREQ3);
+			omap_mux_init_signal("sys_ndmareq3", 0);
 		if (dmachan & (1 << 4))
-			omap_cfg_reg(D3_242X_DMAREQ4);
+			omap_mux_init_signal("sys_ndmareq4", 0);
 		if (dmachan & (1 << 5))
-			omap_cfg_reg(E3_242X_DMAREQ5);
+			omap_mux_init_signal("sys_ndmareq5", 0);
 	}
 
 	/* so far so good ... register the device */
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
new file mode 100644
index 00000000000..a57713c1954
--- /dev/null
+++ b/arch/arm/mach-tegra/Kconfig
@@ -0,0 +1,50 @@
+if ARCH_TEGRA
+
+comment "NVIDIA Tegra options"
+
+choice
+	prompt "Select Tegra processor family for target system"
+
+config ARCH_TEGRA_2x_SOC
+	bool "Tegra 2 family"
+	select CPU_V7
+	select ARM_GIC
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
+	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
+
+endchoice
+
+comment "Tegra board type"
+
+config MACH_HARMONY
+       bool "Harmony board"
+       help
+         Support for nVidia Harmony development platform
+
+choice
+        prompt "Low-level debug console UART"
+        default TEGRA_DEBUG_UART_NONE
+
+config TEGRA_DEBUG_UART_NONE
+        bool "None"
+
+config TEGRA_DEBUG_UARTA
+        bool "UART-A"
+
+config TEGRA_DEBUG_UARTB
+        bool "UART-B"
+
+config TEGRA_DEBUG_UARTC
+        bool "UART-C"
+
+config TEGRA_DEBUG_UARTD
+        bool "UART-D"
+
+config TEGRA_DEBUG_UARTE
+        bool "UART-E"
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
new file mode 100644
index 00000000000..51e9370eed9
--- /dev/null
+++ b/arch/arm/mach-tegra/Makefile
@@ -0,0 +1,14 @@
+obj-y                                   += common.o
+obj-y                                   += io.o
+obj-y                                   += irq.o
+obj-y                                   += clock.o
+obj-y                                   += timer.o
+obj-y                                   += gpio.o
+obj-y                                   += pinmux.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += clock.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra2_clocks.o
+obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
+
+obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
+obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
new file mode 100644
index 00000000000..db52d61a738
--- /dev/null
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -0,0 +1,3 @@
+zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00008000
+params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
+initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
new file mode 100644
index 00000000000..50b15d500ca
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-tegra/board-harmony-pinmux.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <mach/pinmux.h>
+
+#include "board-harmony.h"
+
+static struct tegra_pingroup_config harmony_pinmux[] = {
+	{TEGRA_PINGROUP_ATA,   TEGRA_MUX_IDE,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATB,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATC,   TEGRA_MUX_NAND,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_ATE,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4,     TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTB,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTC,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTD,   TEGRA_MUX_SDIO2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTE,   TEGRA_MUX_RSVD1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DTF,   TEGRA_MUX_I2C3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_GMA,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMB,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMC,   TEGRA_MUX_UARTD,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GMD,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GME,   TEGRA_MUX_SDIO4,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GPU,   TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_GPU7,  TEGRA_MUX_RTCK,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_GPV,   TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_HDINT, TEGRA_MUX_HDMI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_I2CP,  TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_IRRX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_IRTX,  TEGRA_MUX_UARTA,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_KBCA,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCB,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCC,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCD,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCE,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_KBCF,  TEGRA_MUX_KBC,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LCSN,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LD0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD10,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD11,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD12,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD13,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD14,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD15,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD16,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD17,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD2,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD3,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD4,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD5,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD6,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD7,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD8,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LD9,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LDC,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LDI,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHP2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LHS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LM0,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LM1,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LPP,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LPW0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LPW1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LPW2,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSC0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LSC1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSCK,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSDA,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSDI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LSPI,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LVP0,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_LVP1,  TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_LVS,   TEGRA_MUX_DISPLAYA,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_OWC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_PMC,   TEGRA_MUX_PWR_ON,        TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PTA,   TEGRA_MUX_HDMI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_RM,    TEGRA_MUX_I2C,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SDB,   TEGRA_MUX_PWM,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SDC,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SDD,   TEGRA_MUX_PWM,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SDIO1, TEGRA_MUX_SDIO1,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXA,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXC,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXD,  TEGRA_MUX_SPDIF,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SLXK,  TEGRA_MUX_PCIE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPDI,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIG,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIH,  TEGRA_MUX_SPI2_ALT,      TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAB,   TEGRA_MUX_ULPI,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UAD,   TEGRA_MUX_IRDA,          TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UCA,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UCB,   TEGRA_MUX_UARTC,         TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_UDA,   TEGRA_MUX_ULPI,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_CK32,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DDRC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCA,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCB,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCC,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCD,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_PMCE,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_XM2C,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_XM2D,  TEGRA_MUX_NONE,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
+};
+
+void harmony_pinmux_init(void)
+{
+	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
+}
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
new file mode 100644
index 00000000000..05e78dd9b50
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/pda_power.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/setup.h>
+
+#include <mach/iomap.h>
+#include <mach/irqs.h>
+
+#include "board.h"
+#include "board-harmony.h"
+#include "clock.h"
+
+/* NVidia bootloader tags */
+#define ATAG_NVIDIA		0x41000801
+
+#define ATAG_NVIDIA_RM			0x1
+#define ATAG_NVIDIA_DISPLAY		0x2
+#define ATAG_NVIDIA_FRAMEBUFFER		0x3
+#define ATAG_NVIDIA_CHIPSHMOO		0x4
+#define ATAG_NVIDIA_CHIPSHMOOPHYS	0x5
+#define ATAG_NVIDIA_PRESERVED_MEM_0	0x10000
+#define ATAG_NVIDIA_PRESERVED_MEM_N	2
+#define ATAG_NVIDIA_FORCE_32		0x7fffffff
+
+struct tag_tegra {
+	__u32 bootarg_key;
+	__u32 bootarg_len;
+	char bootarg[1];
+};
+
+static int __init parse_tag_nvidia(const struct tag *tag)
+{
+
+	return 0;
+}
+__tagtable(ATAG_NVIDIA, parse_tag_nvidia);
+
+static struct plat_serial8250_port debug_uart_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
+		.mapbase	= TEGRA_UARTD_BASE,
+		.irq		= INT_UARTD,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 216000000,
+	}, {
+		.flags		= 0
+	}
+};
+
+static struct platform_device debug_uart = {
+	.name = "serial8250",
+	.id = PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = debug_uart_platform_data,
+	},
+};
+
+static struct platform_device *harmony_devices[] __initdata = {
+	&debug_uart,
+};
+
+static void __init tegra_harmony_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = 448 * SZ_1M;
+	mi->bank[1].start = SZ_512M;
+	mi->bank[1].node = PHYS_TO_NID(SZ_512M);
+	mi->bank[1].size = SZ_512M;
+}
+
+static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "uartd",	"pll_p",	216000000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+
+static void __init tegra_harmony_init(void)
+{
+	tegra_common_init();
+
+	tegra_clk_init_from_table(harmony_clk_init_table);
+
+	harmony_pinmux_init();
+
+	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
+}
+
+MACHINE_START(HARMONY, "harmony")
+	.boot_params  = 0x00000100,
+	.phys_io        = IO_APB_PHYS,
+	.io_pg_offst    = ((IO_APB_VIRT) >> 18) & 0xfffc,
+	.fixup		= tegra_harmony_fixup,
+	.init_irq       = tegra_init_irq,
+	.init_machine   = tegra_harmony_init,
+	.map_io         = tegra_map_common_io,
+	.timer          = &tegra_timer,
+MACHINE_END
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
new file mode 100644
index 00000000000..09ca7755dd5
--- /dev/null
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _MACH_TEGRA_BOARD_HARMONY_H
+#define _MACH_TEGRA_BOARD_HARMONY_H
+
+void harmony_pinmux_init(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
new file mode 100644
index 00000000000..3d06354136f
--- /dev/null
+++ b/arch/arm/mach-tegra/board.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-tegra/board.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_BOARD_H
+#define __MACH_TEGRA_BOARD_H
+
+#include <linux/types.h>
+
+void __init tegra_common_init(void);
+void __init tegra_map_common_io(void);
+void __init tegra_init_irq(void);
+void __init tegra_init_clock(void);
+
+extern struct sys_timer tegra_timer;
+#endif
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
new file mode 100644
index 00000000000..03ad578349b
--- /dev/null
+++ b/arch/arm/mach-tegra/clock.c
@@ -0,0 +1,488 @@
+/*
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/seq_file.h>
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+
+static DEFINE_SPINLOCK(clock_lock);
+
+struct clk *tegra_get_clock_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	list_for_each_entry(c, &clocks, node) {
+		if (strcmp(c->name, name) == 0) {
+			ret = c;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+
+int clk_reparent(struct clk *c, struct clk *parent)
+{
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->refcnt && c->parent)
+		clk_disable_locked(c->parent);
+	c->parent = parent;
+	if (c->refcnt && c->parent)
+		clk_enable_locked(c->parent);
+	list_del(&c->sibling);
+	list_add_tail(&c->sibling, &parent->children);
+	return 0;
+}
+
+static void propagate_rate(struct clk *c)
+{
+	struct clk *clkp;
+	pr_debug("%s: %s\n", __func__, c->name);
+	list_for_each_entry(clkp, &c->children, sibling) {
+		pr_debug("   %s\n", clkp->name);
+		if (clkp->ops->recalculate_rate)
+			clkp->ops->recalculate_rate(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+void clk_init(struct clk *c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	INIT_LIST_HEAD(&c->children);
+	INIT_LIST_HEAD(&c->sibling);
+
+	if (c->ops && c->ops->init)
+		c->ops->init(c);
+
+	list_add(&c->node, &clocks);
+
+	if (c->parent)
+		list_add_tail(&c->sibling, &c->parent->children);
+
+	spin_unlock_irqrestore(&clock_lock, flags);
+}
+
+int clk_enable_locked(struct clk *c)
+{
+	int ret;
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->refcnt == 0) {
+		if (c->parent) {
+			ret = clk_enable_locked(c->parent);
+			if (ret)
+				return ret;
+		}
+
+		if (c->ops && c->ops->enable) {
+			ret = c->ops->enable(c);
+			if (ret) {
+				if (c->parent)
+					clk_disable_locked(c->parent);
+				return ret;
+			}
+			c->state = ON;
+#ifdef CONFIG_DEBUG_FS
+			c->set = 1;
+#endif
+		}
+	}
+	c->refcnt++;
+
+	return 0;
+}
+
+int clk_enable(struct clk *c)
+{
+	int ret;
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_enable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable_locked(struct clk *c)
+{
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->refcnt == 0) {
+		WARN(1, "Attempting to disable clock %s with refcnt 0", c->name);
+		return;
+	}
+	if (c->refcnt == 1) {
+		if (c->ops && c->ops->disable)
+			c->ops->disable(c);
+
+		if (c->parent)
+			clk_disable_locked(c->parent);
+
+		c->state = OFF;
+	}
+	c->refcnt--;
+}
+
+void clk_disable(struct clk *c)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	clk_disable_locked(c);
+	spin_unlock_irqrestore(&clock_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_set_parent_locked(struct clk *c, struct clk *parent)
+{
+	int ret;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	if (!c->ops || !c->ops->set_parent)
+		return -ENOSYS;
+
+	ret = c->ops->set_parent(c, parent);
+
+	if (ret)
+		return ret;
+
+	propagate_rate(c);
+
+	return 0;
+}
+
+int clk_set_parent(struct clk *c, struct clk *parent)
+{
+	int ret;
+	unsigned long flags;
+	spin_lock_irqsave(&clock_lock, flags);
+	ret = clk_set_parent_locked(c, parent);
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *c)
+{
+	return c->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_rate(struct clk *c, unsigned long rate)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	if (c->ops && c->ops->set_rate)
+		ret = c->ops->set_rate(c, rate);
+	else
+		ret = -ENOSYS;
+
+	propagate_rate(c);
+
+	spin_unlock_irqrestore(&clock_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+unsigned long clk_get_rate(struct clk *c)
+{
+	unsigned long flags;
+	unsigned long ret;
+
+	spin_lock_irqsave(&clock_lock, flags);
+
+	pr_debug("%s: %s\n", __func__, c->name);
+
+	ret = c->rate;
+
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+static int tegra_clk_init_one_from_table(struct tegra_clk_init_table *table)
+{
+	struct clk *c;
+	struct clk *p;
+
+	int ret = 0;
+
+	c = tegra_get_clock_by_name(table->name);
+
+	if (!c) {
+		pr_warning("Unable to initialize clock %s\n",
+			table->name);
+		return -ENODEV;
+	}
+
+	if (table->parent) {
+		p = tegra_get_clock_by_name(table->parent);
+		if (!p) {
+			pr_warning("Unable to find parent %s of clock %s\n",
+				table->parent, table->name);
+			return -ENODEV;
+		}
+
+		if (c->parent != p) {
+			ret = clk_set_parent(c, p);
+			if (ret) {
+				pr_warning("Unable to set parent %s of clock %s: %d\n",
+					table->parent, table->name, ret);
+				return -EINVAL;
+			}
+		}
+	}
+
+	if (table->rate && table->rate != clk_get_rate(c)) {
+		ret = clk_set_rate(c, table->rate);
+		if (ret) {
+			pr_warning("Unable to set clock %s to rate %lu: %d\n",
+				table->name, table->rate, ret);
+			return -EINVAL;
+		}
+	}
+
+	if (table->enabled) {
+		ret = clk_enable(c);
+		if (ret) {
+			pr_warning("Unable to enable clock %s: %d\n",
+				table->name, ret);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+void tegra_clk_init_from_table(struct tegra_clk_init_table *table)
+{
+	for (; table->name; table++)
+		tegra_clk_init_one_from_table(table);
+}
+EXPORT_SYMBOL(tegra_clk_init_from_table);
+
+void tegra_periph_reset_deassert(struct clk *c)
+{
+	tegra2_periph_reset_deassert(c);
+}
+EXPORT_SYMBOL(tegra_periph_reset_deassert);
+
+void tegra_periph_reset_assert(struct clk *c)
+{
+	tegra2_periph_reset_assert(c);
+}
+EXPORT_SYMBOL(tegra_periph_reset_assert);
+
+int __init tegra_init_clock(void)
+{
+	tegra2_init_clocks();
+
+	return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *clk_debugfs_root;
+
+
+static void clock_tree_show_one(struct seq_file *s, struct clk *c, int level)
+{
+	struct clk *child;
+	struct clk *safe;
+	const char *state = "uninit";
+	char div[5] = {0};
+
+	if (c->state == ON)
+		state = "on";
+	else if (c->state == OFF)
+		state = "off";
+
+	if (c->mul != 0 && c->div != 0) {
+		BUG_ON(c->mul > 2);
+		if (c->mul > c->div)
+			snprintf(div, sizeof(div), "x%d", c->mul / c->div);
+		else
+			snprintf(div, sizeof(div), "%d%s", c->div / c->mul,
+				(c->div % c->mul) ? ".5" : "");
+	}
+
+	seq_printf(s, "%*s%-*s %-6s %-3d %-5s %-10lu\n",
+		level * 3 + 1, c->set ? "" : "*",
+		30 - level * 3, c->name,
+		state, c->refcnt, div, c->rate);
+	list_for_each_entry_safe(child, safe, &c->children, sibling) {
+		clock_tree_show_one(s, child, level + 1);
+	}
+}
+
+static int clock_tree_show(struct seq_file *s, void *data)
+{
+	struct clk *c;
+	unsigned long flags;
+	seq_printf(s, " clock                          state  ref div   rate      \n");
+	seq_printf(s, "-----------------------------------------------------------\n");
+	spin_lock_irqsave(&clock_lock, flags);
+	list_for_each_entry(c, &clocks, node)
+		if (c->parent == NULL)
+			clock_tree_show_one(s, c, 0);
+	spin_unlock_irqrestore(&clock_lock, flags);
+	return 0;
+}
+
+static int clock_tree_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clock_tree_show, inode->i_private);
+}
+
+static const struct file_operations clock_tree_fops = {
+	.open		= clock_tree_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int possible_parents_show(struct seq_file *s, void *data)
+{
+	struct clk *c = s->private;
+	int i;
+
+	for (i = 0; c->inputs[i].input; i++) {
+		char *first = (i == 0) ? "" : " ";
+		seq_printf(s, "%s%s", first, c->inputs[i].input->name);
+	}
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int possible_parents_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, possible_parents_show, inode->i_private);
+}
+
+static const struct file_operations possible_parents_fops = {
+	.open		= possible_parents_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	struct dentry *d, *child, *child_tmp;
+
+	d = debugfs_create_dir(c->name, clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dent = d;
+
+	d = debugfs_create_u8("refcnt", S_IRUGO, c->dent, (u8 *)&c->refcnt);
+	if (!d)
+		goto err_out;
+
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d)
+		goto err_out;
+
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (!d)
+		goto err_out;
+
+	if (c->inputs) {
+		d = debugfs_create_file("possible_parents", S_IRUGO, c->dent,
+			c, &possible_parents_fops);
+		if (!d)
+			goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	d = c->dent;
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(c->dent);
+	return -ENOMEM;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err = -ENOMEM;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	d = debugfs_create_file("clock_tree", S_IRUGO, clk_debugfs_root, NULL,
+		&clock_tree_fops);
+	if (!d)
+		goto err_out;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+
+late_initcall(clk_debugfs_init);
+#endif
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
new file mode 100644
index 00000000000..af7c70e2a3b
--- /dev/null
+++ b/arch/arm/mach-tegra/clock.h
@@ -0,0 +1,147 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clock.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_CLOCK_H
+#define __MACH_TEGRA_CLOCK_H
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DIV_BUS			(1 << 0)
+#define DIV_U71			(1 << 1)
+#define DIV_U71_FIXED		(1 << 2)
+#define DIV_2			(1 << 3)
+#define PLL_FIXED		(1 << 4)
+#define PLL_HAS_CPCON		(1 << 5)
+#define MUX			(1 << 6)
+#define PLLD			(1 << 7)
+#define PERIPH_NO_RESET		(1 << 8)
+#define PERIPH_NO_ENB		(1 << 9)
+#define PERIPH_EMC_ENB		(1 << 10)
+#define PERIPH_MANUAL_RESET	(1 << 11)
+#define PLL_ALT_MISC_REG	(1 << 12)
+#define ENABLE_ON_INIT		(1 << 28)
+
+struct clk;
+
+struct clk_mux_sel {
+	struct clk	*input;
+	u32		value;
+};
+
+struct clk_pll_table {
+	unsigned long	input_rate;
+	unsigned long	output_rate;
+	u16		n;
+	u16		m;
+	u8		p;
+	u8		cpcon;
+};
+
+struct clk_ops {
+	void		(*init)(struct clk *);
+	int		(*enable)(struct clk *);
+	void		(*disable)(struct clk *);
+	void		(*recalc)(struct clk *);
+	int		(*set_parent)(struct clk *, struct clk *);
+	int		(*set_rate)(struct clk *, unsigned long);
+	unsigned long	(*get_rate)(struct clk *);
+	long		(*round_rate)(struct clk *, unsigned long);
+	unsigned long	(*recalculate_rate)(struct clk *);
+};
+
+enum clk_state {
+	UNINITIALIZED = 0,
+	ON,
+	OFF,
+};
+
+struct clk {
+	/* node for master clocks list */
+	struct list_head		node;
+	struct list_head		children;	/* list of children */
+	struct list_head		sibling;	/* node for children */
+#ifdef CONFIG_DEBUG_FS
+	struct dentry			*dent;
+	struct dentry			*parent_dent;
+#endif
+	struct clk_ops			*ops;
+	struct clk			*parent;
+	struct clk_lookup		lookup;
+	unsigned long			rate;
+	u32				flags;
+	u32				refcnt;
+	const char			*name;
+	u32				reg;
+	u32				reg_shift;
+	unsigned int			clk_num;
+	enum clk_state			state;
+#ifdef CONFIG_DEBUG_FS
+	bool				set;
+#endif
+
+	/* PLL */
+	unsigned long			input_min;
+	unsigned long			input_max;
+	unsigned long			cf_min;
+	unsigned long			cf_max;
+	unsigned long			vco_min;
+	unsigned long			vco_max;
+	u32				m;
+	u32				n;
+	u32				p;
+	u32				cpcon;
+	const struct clk_pll_table	*pll_table;
+
+	/* DIV */
+	u32				div;
+	u32				mul;
+
+	/* MUX */
+	const struct clk_mux_sel	*inputs;
+	u32				sel;
+	u32				reg_mask;
+};
+
+
+struct clk_duplicate {
+	const char *name;
+	struct clk_lookup lookup;
+};
+
+struct tegra_clk_init_table {
+	const char *name;
+	const char *parent;
+	unsigned long rate;
+	bool enabled;
+};
+
+void tegra2_init_clocks(void);
+void tegra2_periph_reset_deassert(struct clk *c);
+void tegra2_periph_reset_assert(struct clk *c);
+void clk_init(struct clk *clk);
+struct clk *tegra_get_clock_by_name(const char *name);
+unsigned long clk_measure_input_freq(void);
+void clk_disable_locked(struct clk *c);
+int clk_enable_locked(struct clk *c);
+int clk_set_parent_locked(struct clk *c, struct clk *parent);
+int clk_reparent(struct clk *c, struct clk *parent);
+void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
+
+#endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
new file mode 100644
index 00000000000..039a514b61e
--- /dev/null
+++ b/arch/arm/mach-tegra/common.c
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-tegra/board-harmony.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/iomap.h>
+
+#include "board.h"
+#include "clock.h"
+
+static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
+	/* name		parent		rate		enabled */
+	{ "clk_m",	NULL,		0,		true },
+	{ "pll_p",	"clk_m",	216000000,	true },
+	{ "pll_p_out1",	"pll_p",	28800000,	true },
+	{ "pll_p_out2",	"pll_p",	48000000,	true },
+	{ "pll_p_out3",	"pll_p",	72000000,	true },
+	{ "pll_p_out4",	"pll_p",	108000000,	true },
+	{ "sys",	"pll_p_out4",	108000000,	true },
+	{ "hclk",	"sys",		108000000,	true },
+	{ "pclk",	"hclk",		54000000,	true },
+	{ NULL,		NULL,		0,		0},
+};
+
+void __init tegra_init_cache(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
+
+	writel(0x331, p + L2X0_TAG_LATENCY_CTRL);
+	writel(0x441, p + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(p, 0x6C080001, 0x8200c3fe);
+#endif
+}
+
+void __init tegra_common_init(void)
+{
+	tegra_init_clock();
+	tegra_clk_init_from_table(common_clk_init_table);
+	tegra_init_cache();
+}
diff --git a/arch/arm/mach-tegra/gpio-names.h b/arch/arm/mach-tegra/gpio-names.h
new file mode 100644
index 00000000000..f28220a641b
--- /dev/null
+++ b/arch/arm/mach-tegra/gpio-names.h
@@ -0,0 +1,247 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio-names.h
+ *
+ * Copyright (c) 2010 Google, Inc
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_TEGRA_GPIO_NAMES_H
+#define __MACH_TEGRA_GPIO_NAMES_H
+
+#define TEGRA_GPIO_PA0		0
+#define TEGRA_GPIO_PA1		1
+#define TEGRA_GPIO_PA2		2
+#define TEGRA_GPIO_PA3		3
+#define TEGRA_GPIO_PA4		4
+#define TEGRA_GPIO_PA5		5
+#define TEGRA_GPIO_PA6		6
+#define TEGRA_GPIO_PA7		7
+#define TEGRA_GPIO_PB0		8
+#define TEGRA_GPIO_PB1		9
+#define TEGRA_GPIO_PB2		10
+#define TEGRA_GPIO_PB3		11
+#define TEGRA_GPIO_PB4		12
+#define TEGRA_GPIO_PB5		13
+#define TEGRA_GPIO_PB6		14
+#define TEGRA_GPIO_PB7		15
+#define TEGRA_GPIO_PC0		16
+#define TEGRA_GPIO_PC1		17
+#define TEGRA_GPIO_PC2		18
+#define TEGRA_GPIO_PC3		19
+#define TEGRA_GPIO_PC4		20
+#define TEGRA_GPIO_PC5		21
+#define TEGRA_GPIO_PC6		22
+#define TEGRA_GPIO_PC7		23
+#define TEGRA_GPIO_PD0		24
+#define TEGRA_GPIO_PD1		25
+#define TEGRA_GPIO_PD2		26
+#define TEGRA_GPIO_PD3		27
+#define TEGRA_GPIO_PD4		28
+#define TEGRA_GPIO_PD5		29
+#define TEGRA_GPIO_PD6		30
+#define TEGRA_GPIO_PD7		31
+#define TEGRA_GPIO_PE0		32
+#define TEGRA_GPIO_PE1		33
+#define TEGRA_GPIO_PE2		34
+#define TEGRA_GPIO_PE3		35
+#define TEGRA_GPIO_PE4		36
+#define TEGRA_GPIO_PE5		37
+#define TEGRA_GPIO_PE6		38
+#define TEGRA_GPIO_PE7		39
+#define TEGRA_GPIO_PF0		40
+#define TEGRA_GPIO_PF1		41
+#define TEGRA_GPIO_PF2		42
+#define TEGRA_GPIO_PF3		43
+#define TEGRA_GPIO_PF4		44
+#define TEGRA_GPIO_PF5		45
+#define TEGRA_GPIO_PF6		46
+#define TEGRA_GPIO_PF7		47
+#define TEGRA_GPIO_PG0		48
+#define TEGRA_GPIO_PG1		49
+#define TEGRA_GPIO_PG2		50
+#define TEGRA_GPIO_PG3		51
+#define TEGRA_GPIO_PG4		52
+#define TEGRA_GPIO_PG5		53
+#define TEGRA_GPIO_PG6		54
+#define TEGRA_GPIO_PG7		55
+#define TEGRA_GPIO_PH0		56
+#define TEGRA_GPIO_PH1		57
+#define TEGRA_GPIO_PH2		58
+#define TEGRA_GPIO_PH3		59
+#define TEGRA_GPIO_PH4		60
+#define TEGRA_GPIO_PH5		61
+#define TEGRA_GPIO_PH6		62
+#define TEGRA_GPIO_PH7		63
+#define TEGRA_GPIO_PI0		64
+#define TEGRA_GPIO_PI1		65
+#define TEGRA_GPIO_PI2		66
+#define TEGRA_GPIO_PI3		67
+#define TEGRA_GPIO_PI4		68
+#define TEGRA_GPIO_PI5		69
+#define TEGRA_GPIO_PI6		70
+#define TEGRA_GPIO_PI7		71
+#define TEGRA_GPIO_PJ0		72
+#define TEGRA_GPIO_PJ1		73
+#define TEGRA_GPIO_PJ2		74
+#define TEGRA_GPIO_PJ3		75
+#define TEGRA_GPIO_PJ4		76
+#define TEGRA_GPIO_PJ5		77
+#define TEGRA_GPIO_PJ6		78
+#define TEGRA_GPIO_PJ7		79
+#define TEGRA_GPIO_PK0		80
+#define TEGRA_GPIO_PK1		81
+#define TEGRA_GPIO_PK2		82
+#define TEGRA_GPIO_PK3		83
+#define TEGRA_GPIO_PK4		84
+#define TEGRA_GPIO_PK5		85
+#define TEGRA_GPIO_PK6		86
+#define TEGRA_GPIO_PK7		87
+#define TEGRA_GPIO_PL0		88
+#define TEGRA_GPIO_PL1		89
+#define TEGRA_GPIO_PL2		90
+#define TEGRA_GPIO_PL3		91
+#define TEGRA_GPIO_PL4		92
+#define TEGRA_GPIO_PL5		93
+#define TEGRA_GPIO_PL6		94
+#define TEGRA_GPIO_PL7		95
+#define TEGRA_GPIO_PM0		96
+#define TEGRA_GPIO_PM1		97
+#define TEGRA_GPIO_PM2		98
+#define TEGRA_GPIO_PM3		99
+#define TEGRA_GPIO_PM4		100
+#define TEGRA_GPIO_PM5		101
+#define TEGRA_GPIO_PM6		102
+#define TEGRA_GPIO_PM7		103
+#define TEGRA_GPIO_PN0		104
+#define TEGRA_GPIO_PN1		105
+#define TEGRA_GPIO_PN2		106
+#define TEGRA_GPIO_PN3		107
+#define TEGRA_GPIO_PN4		108
+#define TEGRA_GPIO_PN5		109
+#define TEGRA_GPIO_PN6		110
+#define TEGRA_GPIO_PN7		111
+#define TEGRA_GPIO_PO0		112
+#define TEGRA_GPIO_PO1		113
+#define TEGRA_GPIO_PO2		114
+#define TEGRA_GPIO_PO3		115
+#define TEGRA_GPIO_PO4		116
+#define TEGRA_GPIO_PO5		117
+#define TEGRA_GPIO_PO6		118
+#define TEGRA_GPIO_PO7		119
+#define TEGRA_GPIO_PP0		120
+#define TEGRA_GPIO_PP1		121
+#define TEGRA_GPIO_PP2		122
+#define TEGRA_GPIO_PP3		123
+#define TEGRA_GPIO_PP4		124
+#define TEGRA_GPIO_PP5		125
+#define TEGRA_GPIO_PP6		126
+#define TEGRA_GPIO_PP7		127
+#define TEGRA_GPIO_PQ0		128
+#define TEGRA_GPIO_PQ1		129
+#define TEGRA_GPIO_PQ2		130
+#define TEGRA_GPIO_PQ3		131
+#define TEGRA_GPIO_PQ4		132
+#define TEGRA_GPIO_PQ5		133
+#define TEGRA_GPIO_PQ6		134
+#define TEGRA_GPIO_PQ7		135
+#define TEGRA_GPIO_PR0		136
+#define TEGRA_GPIO_PR1		137
+#define TEGRA_GPIO_PR2		138
+#define TEGRA_GPIO_PR3		139
+#define TEGRA_GPIO_PR4		140
+#define TEGRA_GPIO_PR5		141
+#define TEGRA_GPIO_PR6		142
+#define TEGRA_GPIO_PR7		143
+#define TEGRA_GPIO_PS0		144
+#define TEGRA_GPIO_PS1		145
+#define TEGRA_GPIO_PS2		146
+#define TEGRA_GPIO_PS3		147
+#define TEGRA_GPIO_PS4		148
+#define TEGRA_GPIO_PS5		149
+#define TEGRA_GPIO_PS6		150
+#define TEGRA_GPIO_PS7		151
+#define TEGRA_GPIO_PT0		152
+#define TEGRA_GPIO_PT1		153
+#define TEGRA_GPIO_PT2		154
+#define TEGRA_GPIO_PT3		155
+#define TEGRA_GPIO_PT4		156
+#define TEGRA_GPIO_PT5		157
+#define TEGRA_GPIO_PT6		158
+#define TEGRA_GPIO_PT7		159
+#define TEGRA_GPIO_PU0		160
+#define TEGRA_GPIO_PU1		161
+#define TEGRA_GPIO_PU2		162
+#define TEGRA_GPIO_PU3		163
+#define TEGRA_GPIO_PU4		164
+#define TEGRA_GPIO_PU5		165
+#define TEGRA_GPIO_PU6		166
+#define TEGRA_GPIO_PU7		167
+#define TEGRA_GPIO_PV0		168
+#define TEGRA_GPIO_PV1		169
+#define TEGRA_GPIO_PV2		170
+#define TEGRA_GPIO_PV3		171
+#define TEGRA_GPIO_PV4		172
+#define TEGRA_GPIO_PV5		173
+#define TEGRA_GPIO_PV6		174
+#define TEGRA_GPIO_PV7		175
+#define TEGRA_GPIO_PW0		176
+#define TEGRA_GPIO_PW1		177
+#define TEGRA_GPIO_PW2		178
+#define TEGRA_GPIO_PW3		179
+#define TEGRA_GPIO_PW4		180
+#define TEGRA_GPIO_PW5		181
+#define TEGRA_GPIO_PW6		182
+#define TEGRA_GPIO_PW7		183
+#define TEGRA_GPIO_PX0		184
+#define TEGRA_GPIO_PX1		185
+#define TEGRA_GPIO_PX2		186
+#define TEGRA_GPIO_PX3		187
+#define TEGRA_GPIO_PX4		188
+#define TEGRA_GPIO_PX5		189
+#define TEGRA_GPIO_PX6		190
+#define TEGRA_GPIO_PX7		191
+#define TEGRA_GPIO_PY0		192
+#define TEGRA_GPIO_PY1		193
+#define TEGRA_GPIO_PY2		194
+#define TEGRA_GPIO_PY3		195
+#define TEGRA_GPIO_PY4		196
+#define TEGRA_GPIO_PY5		197
+#define TEGRA_GPIO_PY6		198
+#define TEGRA_GPIO_PY7		199
+#define TEGRA_GPIO_PZ0		200
+#define TEGRA_GPIO_PZ1		201
+#define TEGRA_GPIO_PZ2		202
+#define TEGRA_GPIO_PZ3		203
+#define TEGRA_GPIO_PZ4		204
+#define TEGRA_GPIO_PZ5		205
+#define TEGRA_GPIO_PZ6		206
+#define TEGRA_GPIO_PZ7		207
+#define TEGRA_GPIO_PAA0		208
+#define TEGRA_GPIO_PAA1		209
+#define TEGRA_GPIO_PAA2		210
+#define TEGRA_GPIO_PAA3		211
+#define TEGRA_GPIO_PAA4		212
+#define TEGRA_GPIO_PAA5		213
+#define TEGRA_GPIO_PAA6		214
+#define TEGRA_GPIO_PAA7		215
+#define TEGRA_GPIO_PBB0		216
+#define TEGRA_GPIO_PBB1		217
+#define TEGRA_GPIO_PBB2		218
+#define TEGRA_GPIO_PBB3		219
+#define TEGRA_GPIO_PBB4		220
+#define TEGRA_GPIO_PBB5		221
+#define TEGRA_GPIO_PBB6		222
+#define TEGRA_GPIO_PBB7		223
+
+#endif
diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c
new file mode 100644
index 00000000000..fe78fba25f3
--- /dev/null
+++ b/arch/arm/mach-tegra/gpio.c
@@ -0,0 +1,348 @@
+/*
+ * arch/arm/mach-tegra/gpio.c
+ *
+ * Copyright (c) 2010 Google, Inc
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/iomap.h>
+
+#define GPIO_BANK(x)		((x) >> 5)
+#define GPIO_PORT(x)		(((x) >> 3) & 0x3)
+#define GPIO_BIT(x)		((x) & 0x7)
+
+#define GPIO_REG(x)		(IO_TO_VIRT(TEGRA_GPIO_BASE) +	\
+				 GPIO_BANK(x) * 0x80 +		\
+				 GPIO_PORT(x) * 4)
+
+#define GPIO_CNF(x)		(GPIO_REG(x) + 0x00)
+#define GPIO_OE(x)		(GPIO_REG(x) + 0x10)
+#define GPIO_OUT(x)		(GPIO_REG(x) + 0X20)
+#define GPIO_IN(x)		(GPIO_REG(x) + 0x30)
+#define GPIO_INT_STA(x)		(GPIO_REG(x) + 0x40)
+#define GPIO_INT_ENB(x)		(GPIO_REG(x) + 0x50)
+#define GPIO_INT_LVL(x)		(GPIO_REG(x) + 0x60)
+#define GPIO_INT_CLR(x)		(GPIO_REG(x) + 0x70)
+
+#define GPIO_MSK_CNF(x)		(GPIO_REG(x) + 0x800)
+#define GPIO_MSK_OE(x)		(GPIO_REG(x) + 0x810)
+#define GPIO_MSK_OUT(x)		(GPIO_REG(x) + 0X820)
+#define GPIO_MSK_INT_STA(x)	(GPIO_REG(x) + 0x840)
+#define GPIO_MSK_INT_ENB(x)	(GPIO_REG(x) + 0x850)
+#define GPIO_MSK_INT_LVL(x)	(GPIO_REG(x) + 0x860)
+
+#define GPIO_INT_LVL_MASK		0x010101
+#define GPIO_INT_LVL_EDGE_RISING	0x000101
+#define GPIO_INT_LVL_EDGE_FALLING	0x000100
+#define GPIO_INT_LVL_EDGE_BOTH		0x010100
+#define GPIO_INT_LVL_LEVEL_HIGH		0x000001
+#define GPIO_INT_LVL_LEVEL_LOW		0x000000
+
+struct tegra_gpio_bank {
+	int bank;
+	int irq;
+	spinlock_t lvl_lock[4];
+};
+
+
+static struct tegra_gpio_bank tegra_gpio_banks[] = {
+	{.bank = 0, .irq = INT_GPIO1},
+	{.bank = 1, .irq = INT_GPIO2},
+	{.bank = 2, .irq = INT_GPIO3},
+	{.bank = 3, .irq = INT_GPIO4},
+	{.bank = 4, .irq = INT_GPIO5},
+	{.bank = 5, .irq = INT_GPIO6},
+	{.bank = 6, .irq = INT_GPIO7},
+};
+
+static int tegra_gpio_compose(int bank, int port, int bit)
+{
+	return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7);
+}
+
+static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
+{
+	u32 val;
+
+	val = 0x100 << GPIO_BIT(gpio);
+	if (value)
+		val |= 1 << GPIO_BIT(gpio);
+	__raw_writel(val, reg);
+}
+
+void tegra_gpio_enable(int gpio)
+{
+	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1);
+}
+
+void tegra_gpio_disable(int gpio)
+{
+	tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0);
+}
+
+static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value);
+}
+
+static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+}
+
+static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0);
+	return 0;
+}
+
+static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+					int value)
+{
+	tegra_gpio_set(chip, offset, value);
+	tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1);
+	return 0;
+}
+
+
+
+static struct gpio_chip tegra_gpio_chip = {
+	.label			= "tegra-gpio",
+	.direction_input	= tegra_gpio_direction_input,
+	.get			= tegra_gpio_get,
+	.direction_output	= tegra_gpio_direction_output,
+	.set			= tegra_gpio_set,
+	.base			= 0,
+	.ngpio			= ARCH_NR_GPIOS,
+};
+
+static void tegra_gpio_irq_ack(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	__raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+}
+
+static void tegra_gpio_irq_mask(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
+}
+
+static void tegra_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio = irq - INT_GPIO_BASE;
+
+	tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
+}
+
+static int tegra_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio = irq - INT_GPIO_BASE;
+	struct tegra_gpio_bank *bank = get_irq_chip_data(irq);
+	int port = GPIO_PORT(gpio);
+	int lvl_type;
+	int val;
+	unsigned long flags;
+
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_EDGE_RISING:
+		lvl_type = GPIO_INT_LVL_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		lvl_type = GPIO_INT_LVL_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		lvl_type = GPIO_INT_LVL_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		lvl_type = GPIO_INT_LVL_LEVEL_HIGH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		lvl_type = GPIO_INT_LVL_LEVEL_LOW;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&bank->lvl_lock[port], flags);
+
+	val = __raw_readl(GPIO_INT_LVL(gpio));
+	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
+	val |= lvl_type << GPIO_BIT(gpio);
+	__raw_writel(val, GPIO_INT_LVL(gpio));
+
+	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+
+	return 0;
+}
+
+static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct tegra_gpio_bank *bank;
+	int port;
+	int pin;
+	int unmasked = 0;
+
+	desc->chip->ack(irq);
+
+	bank = get_irq_data(irq);
+
+	for (port = 0; port < 4; port++) {
+		int gpio = tegra_gpio_compose(bank->bank, port, 0);
+		unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
+			__raw_readl(GPIO_INT_ENB(gpio));
+		u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+
+		for_each_set_bit(pin, &sta, 8) {
+			__raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+
+			/* if gpio is edge triggered, clear condition
+			 * before executing the hander so that we don't
+			 * miss edges
+			 */
+			if (lvl & (0x100 << pin)) {
+				unmasked = 1;
+				desc->chip->unmask(irq);
+			}
+
+			generic_handle_irq(gpio_to_irq(gpio + pin));
+		}
+	}
+
+	if (!unmasked)
+		desc->chip->unmask(irq);
+
+}
+
+
+static struct irq_chip tegra_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= tegra_gpio_irq_ack,
+	.mask		= tegra_gpio_irq_mask,
+	.unmask		= tegra_gpio_irq_unmask,
+	.set_type	= tegra_gpio_irq_set_type,
+};
+
+
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+static int __init tegra_gpio_init(void)
+{
+	struct tegra_gpio_bank *bank;
+	int i;
+	int j;
+
+	for (i = 0; i < 7; i++) {
+		for (j = 0; j < 4; j++) {
+			int gpio = tegra_gpio_compose(i, j, 0);
+			__raw_writel(0x00, GPIO_INT_ENB(gpio));
+		}
+	}
+
+	gpiochip_add(&tegra_gpio_chip);
+
+	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + ARCH_NR_GPIOS); i++) {
+		bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+
+		lockdep_set_class(&irq_desc[i].lock, &gpio_lock_class);
+		set_irq_chip_data(i, bank);
+		set_irq_chip(i, &tegra_gpio_irq_chip);
+		set_irq_handler(i, handle_simple_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+		bank = &tegra_gpio_banks[i];
+
+		set_irq_chained_handler(bank->irq, tegra_gpio_irq_handler);
+		set_irq_data(bank->irq, bank);
+
+		for (j = 0; j < 4; j++)
+			spin_lock_init(&bank->lvl_lock[j]);
+	}
+
+	return 0;
+}
+
+postcore_initcall(tegra_gpio_init);
+
+#ifdef	CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static int dbg_gpio_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int j;
+
+	for (i = 0; i < 7; i++) {
+		for (j = 0; j < 4; j++) {
+			int gpio = tegra_gpio_compose(i, j, 0);
+			seq_printf(s, "%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
+			       i, j,
+			       __raw_readl(GPIO_CNF(gpio)),
+			       __raw_readl(GPIO_OE(gpio)),
+			       __raw_readl(GPIO_OUT(gpio)),
+			       __raw_readl(GPIO_IN(gpio)),
+			       __raw_readl(GPIO_INT_STA(gpio)),
+			       __raw_readl(GPIO_INT_ENB(gpio)),
+			       __raw_readl(GPIO_INT_LVL(gpio)));
+		}
+	}
+	return 0;
+}
+
+static int dbg_gpio_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_gpio_show, &inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_gpio_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tegra_gpio_debuginit(void)
+{
+	(void) debugfs_create_file("tegra_gpio", S_IRUGO,
+					NULL, NULL, &debug_fops);
+	return 0;
+}
+late_initcall(tegra_gpio_debuginit);
+#endif
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
new file mode 100644
index 00000000000..b5349b2f13d
--- /dev/null
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -0,0 +1,61 @@
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+        .section ".text.head", "ax"
+	__CPUINIT
+
+/*
+ * Tegra specific entry point for secondary CPUs.
+ *   The secondary kernel init calls v7_flush_dcache_all before it enables
+ *   the L1; however, the L1 comes out of reset in an undefined state, so
+ *   the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ *   of cache lines with uninitialized data and uninitialized tags to get
+ *   written out to memory, which does really unpleasant things to the main
+ *   processor.  We fix this by performing an invalidate, rather than a
+ *   clean + invalidate, before jumping into the kernel.
+ */
+ENTRY(v7_invalidate_l1)
+        mov     r0, #0
+        mcr     p15, 2, r0, c0, c0, 0
+        mrc     p15, 1, r0, c0, c0, 0
+
+        ldr     r1, =0x7fff
+        and     r2, r1, r0, lsr #13
+
+        ldr     r1, =0x3ff
+
+        and     r3, r1, r0, lsr #3  @ NumWays - 1
+        add     r2, r2, #1          @ NumSets
+
+        and     r0, r0, #0x7
+        add     r0, r0, #4          @ SetShift
+
+        clz     r1, r3              @ WayShift
+        add     r4, r3, #1          @ NumWays
+1:      sub     r2, r2, #1          @ NumSets--
+        mov     r3, r4              @ Temp = NumWays
+2:      subs    r3, r3, #1          @ Temp--
+        mov     r5, r3, lsl r1
+        mov     r6, r2, lsl r0
+        orr     r5, r5, r6          @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+        mcr     p15, 0, r5, c7, c6, 2
+        bgt     2b
+        cmp     r2, #0
+        bgt     1b
+        dsb
+        isb
+        mov     pc, lr
+ENDPROC(v7_invalidate_l1)
+
+ENTRY(tegra_secondary_startup)
+	msr	cpsr_fsxc, #0xd3
+        bl      v7_invalidate_l1
+	mrc	p15, 0, r0, c0, c0, 5
+        and	r0, r0, #15
+        ldr     r1, =0x6000f100
+        str     r0, [r1]
+1:      ldr     r2, [r1]
+        cmp     r0, r2
+        beq     1b
+        b       secondary_startup
+ENDPROC(tegra_secondary_startup)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
new file mode 100644
index 00000000000..8e7f115aa21
--- /dev/null
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -0,0 +1,140 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+
+static DECLARE_COMPLETION(cpu_killed);
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+	"	mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+	"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, #0x04\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, #0x20\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  :
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		/*if (pen_release == cpu) {*/
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		/*}*/
+
+		/*
+		 * getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * The trouble is, letting people know about this is not really
+		 * possible, since we are currently running incoherently, and
+		 * therefore cannot safely call printk() or anything else
+		 */
+#ifdef DEBUG
+		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
+#endif
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+#ifdef DEBUG
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+#endif
+
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h
new file mode 100644
index 00000000000..cc115174899
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/barriers.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-realview/include/mach/barriers.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_BARRIERS_H
+#define __MACH_BARRIERS_H
+
+#include <asm/outercache.h>
+
+#define rmb()		dmb()
+#define wmb()		do { dsb(); outer_sync(); } while (0)
+#define mb()		wmb()
+
+#endif	/* __MACH_BARRIERS_H */
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
new file mode 100644
index 00000000000..2896f25ebfb
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clk.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLK_H
+#define __MACH_CLK_H
+
+void tegra_periph_reset_deassert(struct clk *c);
+void tegra_periph_reset_assert(struct clk *c);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-tegra/include/mach/clkdev.h
new file mode 100644
index 00000000000..412f5c63e65
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/clkdev.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-tegra/include/mach/clkdev.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
new file mode 100644
index 00000000000..55a39564b43
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-tegra/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/io.h>
+
+	.macro  addruart,rx, tmp
+        mrc     p15, 0, \rx, c1, c0
+        tst     \rx, #1                 @ MMU enabled?
+        ldreq   \rx, =IO_APB_PHYS       @ physical
+        ldrne   \rx, =IO_APB_VIRT        @ virtual
+#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
+#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
+#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
+        orr     \rx, \rx, #0x6000
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+	ldr	\tmp, =0x6040
+        orr     \rx, \rx, \tmp
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+        orr     \rx, \rx, #0x6200
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+        orr     \rx, \rx, #0x6300
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+        orr     \rx, \rx, #0x6400
+#endif
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
+
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
new file mode 100644
index 00000000000..2ba9e5c9d2f
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -0,0 +1,118 @@
+/* arch/arm/mach-tegra/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2009 Palm, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <mach/iomap.h>
+#include <mach/io.h>
+
+#if defined(CONFIG_ARM_GIC)
+
+#include <asm/hardware/gic.h>
+
+	/* Uses the GIC interrupt controller built into the cpu */
+#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	movw \base, #(ICTRL_BASE & 0x0000ffff)
+	movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-28 are reserved
+	 * 29-31 are local.  We allow 30 to be used for the watchdog.
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * For now, we ignore all local interrupts so only return an interrupt
+	 * if it's between 30 and 1020.  The test_for_ipi routine below will
+	 * pick up on IPIs.
+	 *
+	 * A simple read from the controller will tell us the number of the
+	 * highest priority enabled interrupt.  We then just need to check
+	 * whether it is in the valid range for an IRQ (30-1020 inclusive).
+	 */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* bits 12-10 = src CPU, 9-0 = int # */
+	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+	ldr		\tmp, =1021
+
+	bic     \irqnr, \irqstat, #0x1c00
+
+	cmp     \irqnr, #29
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	cmp	\irqnr, #16
+	strcc	\irqstat, [\base, #GIC_CPU_EOI]
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	mov 	\tmp, #0
+	cmp	\irqnr, #29
+	moveq	\tmp, #1
+	streq	\irqstat, [\base, #GIC_CPU_EOI]
+	cmp	\tmp, #0
+	.endm
+
+#else
+	/* legacy interrupt controller for AP16 */
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	@ EVP base at 0xf010f000
+	mov \base, #0xf0000000
+	orr \base, #0x00100000
+	orr \base, #0x0000f000
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr \irqnr, [\base, #0x20]	@ EVT_IRQ_STS
+	cmp \irqnr, #0x80
+	.endm
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
new file mode 100644
index 00000000000..540e822e50f
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_H
+#define __MACH_TEGRA_GPIO_H
+
+#include <mach/irqs.h>
+
+#define ARCH_NR_GPIOS		INT_GPIO_NR
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+#define TEGRA_IRQ_TO_GPIO(irq) ((gpio) - INT_GPIO_BASE)
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	if (gpio < ARCH_NR_GPIOS)
+		return INT_GPIO_BASE + gpio;
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
+		return irq - INT_GPIO_BASE;
+	return -EINVAL;
+}
+
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/hardware.h b/arch/arm/mach-tegra/include/mach/hardware.h
new file mode 100644
index 00000000000..6014edf60d9
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/hardware.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-tegra/include/mach/hardware.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_HARDWARE_H
+#define __MACH_TEGRA_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
new file mode 100644
index 00000000000..35edfc32ffc
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-tegra/include/mach/io.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IO_H
+#define __MACH_TEGRA_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* On TEGRA, many peripherals are very closely packed in
+ * two 256MB io windows (that actually only use about 64KB
+ * at the start of each).
+ *
+ * We will just map the first 1MB of each window (to minimize
+ * pt entries needed) and provide a macro to transform physical
+ * io addresses to an appropriate void __iomem *.
+ *
+ */
+
+#define IO_CPU_PHYS     0x50040000
+#define IO_CPU_VIRT     0xFE000000
+#define IO_CPU_SIZE	SZ_16K
+
+#define IO_PPSB_PHYS	0x60000000
+#define IO_PPSB_VIRT	0xFE200000
+#define IO_PPSB_SIZE	SZ_1M
+
+#define IO_APB_PHYS	0x70000000
+#define IO_APB_VIRT	0xFE300000
+#define IO_APB_SIZE	SZ_1M
+
+#define IO_TO_VIRT_BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
+#define IO_TO_VIRT_XLATE(p, pst, vst)	(((p) - (pst) + (vst)))
+
+#define IO_TO_VIRT(n) ( \
+	IO_TO_VIRT_BETWEEN((n), IO_PPSB_PHYS, IO_PPSB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_PPSB_PHYS, IO_PPSB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_APB_PHYS, IO_APB_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_APB_PHYS, IO_APB_VIRT) :	\
+	IO_TO_VIRT_BETWEEN((n), IO_CPU_PHYS, IO_CPU_SIZE) ?		\
+		IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) :	\
+	0)
+
+#ifndef __ASSEMBLER__
+
+#define __arch_ioremap(p, s, t)	tegra_ioremap(p, s, t)
+#define __arch_iounmap(v)	tegra_iounmap(v)
+
+void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
+void tegra_iounmap(volatile void __iomem *addr);
+
+#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n))
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
new file mode 100644
index 00000000000..1741f7dd7a9
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -0,0 +1,203 @@
+/*
+ * arch/arm/mach-tegra/include/mach/iomap.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IOMAP_H
+#define __MACH_TEGRA_IOMAP_H
+
+#include <asm/sizes.h>
+
+#define TEGRA_ARM_PERIF_BASE		0x50040000
+#define TEGRA_ARM_PERIF_SIZE		SZ_8K
+
+#define TEGRA_ARM_INT_DIST_BASE		0x50041000
+#define TEGRA_ARM_INT_DIST_SIZE		SZ_4K
+
+#define TEGRA_DISPLAY_BASE		0x54200000
+#define TEGRA_DISPLAY_SIZE		SZ_256K
+
+#define TEGRA_DISPLAY2_BASE		0x54240000
+#define TEGRA_DISPLAY2_SIZE		SZ_256K
+
+#define TEGRA_PRIMARY_ICTLR_BASE	0x60004000
+#define TEGRA_PRIMARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_SECONDARY_ICTLR_BASE	0x60004100
+#define TEGRA_SECONDARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_TERTIARY_ICTLR_BASE	0x60004200
+#define TEGRA_TERTIARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_QUATERNARY_ICTLR_BASE	0x60004300
+#define TEGRA_QUATERNARY_ICTLR_SIZE	SZ_64
+
+#define TEGRA_TMR1_BASE			0x60005000
+#define TEGRA_TMR1_SIZE			SZ_8
+
+#define TEGRA_TMR2_BASE			0x60005008
+#define TEGRA_TMR2_SIZE			SZ_8
+
+#define TEGRA_TMRUS_BASE		0x60005010
+#define TEGRA_TMRUS_SIZE		SZ_64
+
+#define TEGRA_TMR3_BASE			0x60005050
+#define TEGRA_TMR3_SIZE			SZ_8
+
+#define TEGRA_TMR4_BASE			0x60005058
+#define TEGRA_TMR4_SIZE			SZ_8
+
+#define TEGRA_CLK_RESET_BASE		0x60006000
+#define TEGRA_CLK_RESET_SIZE		SZ_4K
+
+#define TEGRA_FLOW_CTRL_BASE		0x60007000
+#define TEGRA_FLOW_CTRL_SIZE		20
+
+#define TEGRA_STATMON_BASE		0x6000C4000
+#define TEGRA_STATMON_SIZE		SZ_1K
+
+#define TEGRA_GPIO_BASE			0x6000D000
+#define TEGRA_GPIO_SIZE			SZ_4K
+
+#define TEGRA_EXCEPTION_VECTORS_BASE    0x6000F000
+#define TEGRA_EXCEPTION_VECTORS_SIZE    SZ_4K
+
+#define TEGRA_APB_MISC_BASE		0x70000000
+#define TEGRA_APB_MISC_SIZE		SZ_4K
+
+#define TEGRA_AC97_BASE			0x70002000
+#define TEGRA_AC97_SIZE			SZ_512
+
+#define TEGRA_SPDIF_BASE		0x70002400
+#define TEGRA_SPDIF_SIZE		SZ_512
+
+#define TEGRA_I2S1_BASE			0x70002800
+#define TEGRA_I2S1_SIZE			SZ_256
+
+#define TEGRA_I2S2_BASE			0x70002A00
+#define TEGRA_I2S2_SIZE			SZ_256
+
+#define TEGRA_UARTA_BASE		0x70006000
+#define TEGRA_UARTA_SIZE		SZ_64
+
+#define TEGRA_UARTB_BASE		0x70006040
+#define TEGRA_UARTB_SIZE		SZ_64
+
+#define TEGRA_UARTC_BASE		0x70006200
+#define TEGRA_UARTC_SIZE		SZ_256
+
+#define TEGRA_UARTD_BASE		0x70006300
+#define TEGRA_UARTD_SIZE		SZ_256
+
+#define TEGRA_UARTE_BASE		0x70006400
+#define TEGRA_UARTE_SIZE		SZ_256
+
+#define TEGRA_NAND_BASE			0x70008000
+#define TEGRA_NAND_SIZE			SZ_256
+
+#define TEGRA_HSMMC_BASE		0x70008500
+#define TEGRA_HSMMC_SIZE		SZ_256
+
+#define TEGRA_SNOR_BASE			0x70009000
+#define TEGRA_SNOR_SIZE			SZ_4K
+
+#define TEGRA_PWFM_BASE			0x7000A000
+#define TEGRA_PWFM_SIZE			SZ_256
+
+#define TEGRA_MIPI_BASE			0x7000B000
+#define TEGRA_MIPI_SIZE			SZ_256
+
+#define TEGRA_I2C_BASE			0x7000C000
+#define TEGRA_I2C_SIZE			SZ_256
+
+#define TEGRA_TWC_BASE			0x7000C100
+#define TEGRA_TWC_SIZE			SZ_256
+
+#define TEGRA_SPI_BASE			0x7000C380
+#define TEGRA_SPI_SIZE			48
+
+#define TEGRA_I2C2_BASE			0x7000C400
+#define TEGRA_I2C2_SIZE			SZ_256
+
+#define TEGRA_I2C3_BASE			0x7000C500
+#define TEGRA_I2C3_SIZE			SZ_256
+
+#define TEGRA_OWR_BASE			0x7000D000
+#define TEGRA_OWR_SIZE			80
+
+#define TEGRA_DVC_BASE			0x7000D000
+#define TEGRA_DVC_SIZE			SZ_512
+
+#define TEGRA_SPI1_BASE			0x7000D400
+#define TEGRA_SPI1_SIZE			SZ_512
+
+#define TEGRA_SPI2_BASE			0x7000D600
+#define TEGRA_SPI2_SIZE			SZ_512
+
+#define TEGRA_SPI3_BASE			0x7000D800
+#define TEGRA_SPI3_SIZE			SZ_512
+
+#define TEGRA_SPI4_BASE			0x7000DA00
+#define TEGRA_SPI4_SIZE			SZ_512
+
+#define TEGRA_RTC_BASE			0x7000E000
+#define TEGRA_RTC_SIZE			SZ_256
+
+#define TEGRA_KBC_BASE			0x7000E200
+#define TEGRA_KBC_SIZE			SZ_256
+
+#define TEGRA_PMC_BASE			0x7000E400
+#define TEGRA_PMC_SIZE			SZ_256
+
+#define TEGRA_MC_BASE			0x7000F000
+#define TEGRA_MC_SIZE			SZ_1K
+
+#define TEGRA_EMC_BASE			0x7000F400
+#define TEGRA_EMC_SIZE			SZ_1K
+
+#define TEGRA_FUSE_BASE			0x7000F800
+#define TEGRA_FUSE_SIZE			SZ_1K
+
+#define TEGRA_KFUSE_BASE		0x7000FC00
+#define TEGRA_KFUSE_SIZE		SZ_1K
+
+#define TEGRA_CSITE_BASE		0x70040000
+#define TEGRA_CSITE_SIZE		SZ_256K
+
+#define TEGRA_USB_BASE			0xC5000000
+#define TEGRA_USB_SIZE			SZ_16K
+
+#define TEGRA_USB1_BASE			0xC5004000
+#define TEGRA_USB1_SIZE			SZ_16K
+
+#define TEGRA_USB2_BASE			0xC5008000
+#define TEGRA_USB2_SIZE			SZ_16K
+
+#define TEGRA_SDMMC1_BASE		0xC8000000
+#define TEGRA_SDMMC1_SIZE		SZ_512
+
+#define TEGRA_SDMMC2_BASE		0xC8000200
+#define TEGRA_SDMMC2_SIZE		SZ_512
+
+#define TEGRA_SDMMC3_BASE		0xC8000400
+#define TEGRA_SDMMC3_SIZE		SZ_512
+
+#define TEGRA_SDMMC4_BASE		0xC8000600
+#define TEGRA_SDMMC4_SIZE		SZ_512
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
new file mode 100644
index 00000000000..20f640edaa0
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/irqs.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-tegra/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_IRQS_H
+#define __MACH_TEGRA_IRQS_H
+
+#define INT_GIC_BASE			0
+
+#define IRQ_LOCALTIMER                  29
+
+/* Primary Interrupt Controller */
+#define INT_PRI_BASE			(INT_GIC_BASE + 32)
+#define INT_TMR1			(INT_PRI_BASE + 0)
+#define INT_TMR2			(INT_PRI_BASE + 1)
+#define INT_RTC				(INT_PRI_BASE + 2)
+#define INT_I2S2			(INT_PRI_BASE + 3)
+#define INT_SHR_SEM_INBOX_IBF		(INT_PRI_BASE + 4)
+#define INT_SHR_SEM_INBOX_IBE		(INT_PRI_BASE + 5)
+#define INT_SHR_SEM_OUTBOX_IBF		(INT_PRI_BASE + 6)
+#define INT_SHR_SEM_OUTBOX_IBE		(INT_PRI_BASE + 7)
+#define INT_VDE_UCQ_ERROR		(INT_PRI_BASE + 8)
+#define INT_VDE_SYNC_TOKEN		(INT_PRI_BASE + 9)
+#define INT_VDE_BSE_V			(INT_PRI_BASE + 10)
+#define INT_VDE_BSE_A			(INT_PRI_BASE + 11)
+#define INT_VDE_SXE			(INT_PRI_BASE + 12)
+#define INT_I2S1			(INT_PRI_BASE + 13)
+#define INT_SDMMC1			(INT_PRI_BASE + 14)
+#define INT_SDMMC2			(INT_PRI_BASE + 15)
+#define INT_XIO				(INT_PRI_BASE + 16)
+#define INT_VDE				(INT_PRI_BASE + 17)
+#define INT_AVP_UCQ			(INT_PRI_BASE + 18)
+#define INT_SDMMC3			(INT_PRI_BASE + 19)
+#define INT_USB				(INT_PRI_BASE + 20)
+#define INT_USB2			(INT_PRI_BASE + 21)
+#define INT_PRI_RES_22			(INT_PRI_BASE + 22)
+#define INT_EIDE			(INT_PRI_BASE + 23)
+#define INT_NANDFLASH			(INT_PRI_BASE + 24)
+#define INT_VCP				(INT_PRI_BASE + 25)
+#define INT_APB_DMA			(INT_PRI_BASE + 26)
+#define INT_AHB_DMA			(INT_PRI_BASE + 27)
+#define INT_GNT_0			(INT_PRI_BASE + 28)
+#define INT_GNT_1			(INT_PRI_BASE + 29)
+#define INT_OWR				(INT_PRI_BASE + 30)
+#define INT_SDMMC4			(INT_PRI_BASE + 31)
+
+/* Secondary Interrupt Controller */
+#define INT_SEC_BASE			(INT_PRI_BASE + 32)
+#define INT_GPIO1			(INT_SEC_BASE + 0)
+#define INT_GPIO2			(INT_SEC_BASE + 1)
+#define INT_GPIO3			(INT_SEC_BASE + 2)
+#define INT_GPIO4			(INT_SEC_BASE + 3)
+#define INT_UARTA			(INT_SEC_BASE + 4)
+#define INT_UARTB			(INT_SEC_BASE + 5)
+#define INT_I2C				(INT_SEC_BASE + 6)
+#define INT_SPI				(INT_SEC_BASE + 7)
+#define INT_TWC				(INT_SEC_BASE + 8)
+#define INT_TMR3			(INT_SEC_BASE + 9)
+#define INT_TMR4			(INT_SEC_BASE + 10)
+#define INT_FLOW_RSM0			(INT_SEC_BASE + 11)
+#define INT_FLOW_RSM1			(INT_SEC_BASE + 12)
+#define INT_SPDIF			(INT_SEC_BASE + 13)
+#define INT_UARTC			(INT_SEC_BASE + 14)
+#define INT_MIPI			(INT_SEC_BASE + 15)
+#define INT_EVENTA			(INT_SEC_BASE + 16)
+#define INT_EVENTB			(INT_SEC_BASE + 17)
+#define INT_EVENTC			(INT_SEC_BASE + 18)
+#define INT_EVENTD			(INT_SEC_BASE + 19)
+#define INT_VFIR			(INT_SEC_BASE + 20)
+#define INT_DVC				(INT_SEC_BASE + 21)
+#define INT_SYS_STATS_MON		(INT_SEC_BASE + 22)
+#define INT_GPIO5			(INT_SEC_BASE + 23)
+#define INT_CPU0_PMU_INTR		(INT_SEC_BASE + 24)
+#define INT_CPU2_PMU_INTR		(INT_SEC_BASE + 25)
+#define INT_SEC_RES_26			(INT_SEC_BASE + 26)
+#define INT_S_LINK1			(INT_SEC_BASE + 27)
+#define INT_APB_DMA_COP			(INT_SEC_BASE + 28)
+#define INT_AHB_DMA_COP			(INT_SEC_BASE + 29)
+#define INT_DMA_TX			(INT_SEC_BASE + 30)
+#define INT_DMA_RX			(INT_SEC_BASE + 31)
+
+/* Tertiary Interrupt Controller */
+#define INT_TRI_BASE			(INT_SEC_BASE + 32)
+#define INT_HOST1X_COP_SYNCPT		(INT_TRI_BASE + 0)
+#define INT_HOST1X_MPCORE_SYNCPT	(INT_TRI_BASE + 1)
+#define INT_HOST1X_COP_GENERAL		(INT_TRI_BASE + 2)
+#define INT_HOST1X_MPCORE_GENERAL	(INT_TRI_BASE + 3)
+#define INT_MPE_GENERAL			(INT_TRI_BASE + 4)
+#define INT_VI_GENERAL			(INT_TRI_BASE + 5)
+#define INT_EPP_GENERAL			(INT_TRI_BASE + 6)
+#define INT_ISP_GENERAL			(INT_TRI_BASE + 7)
+#define INT_2D_GENERAL			(INT_TRI_BASE + 8)
+#define INT_DISPLAY_GENERAL		(INT_TRI_BASE + 9)
+#define INT_DISPLAY_B_GENERAL		(INT_TRI_BASE + 10)
+#define INT_HDMI			(INT_TRI_BASE + 11)
+#define INT_TVO_GENERAL			(INT_TRI_BASE + 12)
+#define INT_MC_GENERAL			(INT_TRI_BASE + 13)
+#define INT_EMC_GENERAL			(INT_TRI_BASE + 14)
+#define INT_TRI_RES_15			(INT_TRI_BASE + 15)
+#define INT_TRI_RES_16			(INT_TRI_BASE + 16)
+#define INT_AC97			(INT_TRI_BASE + 17)
+#define INT_SPI_2			(INT_TRI_BASE + 18)
+#define INT_SPI_3			(INT_TRI_BASE + 19)
+#define INT_I2C2			(INT_TRI_BASE + 20)
+#define INT_KBC				(INT_TRI_BASE + 21)
+#define INT_EXTERNAL_PMU		(INT_TRI_BASE + 22)
+#define INT_GPIO6			(INT_TRI_BASE + 23)
+#define INT_TVDAC			(INT_TRI_BASE + 24)
+#define INT_GPIO7			(INT_TRI_BASE + 25)
+#define INT_UARTD			(INT_TRI_BASE + 26)
+#define INT_UARTE			(INT_TRI_BASE + 27)
+#define INT_I2C3			(INT_TRI_BASE + 28)
+#define INT_SPI_4			(INT_TRI_BASE + 29)
+#define INT_TRI_RES_30			(INT_TRI_BASE + 30)
+#define INT_SW_RESERVED			(INT_TRI_BASE + 31)
+
+/* Quaternary Interrupt Controller */
+#define INT_QUAD_BASE			(INT_TRI_BASE + 32)
+#define INT_SNOR			(INT_QUAD_BASE + 0)
+#define INT_USB3			(INT_QUAD_BASE + 1)
+#define INT_PCIE_INTR			(INT_QUAD_BASE + 2)
+#define INT_PCIE_MSI			(INT_QUAD_BASE + 3)
+#define INT_QUAD_RES_4			(INT_QUAD_BASE + 4)
+#define INT_QUAD_RES_5			(INT_QUAD_BASE + 5)
+#define INT_QUAD_RES_6			(INT_QUAD_BASE + 6)
+#define INT_QUAD_RES_7			(INT_QUAD_BASE + 7)
+#define INT_APB_DMA_CH0			(INT_QUAD_BASE + 8)
+#define INT_APB_DMA_CH1			(INT_QUAD_BASE + 9)
+#define INT_APB_DMA_CH2			(INT_QUAD_BASE + 10)
+#define INT_APB_DMA_CH3			(INT_QUAD_BASE + 11)
+#define INT_APB_DMA_CH4			(INT_QUAD_BASE + 12)
+#define INT_APB_DMA_CH5			(INT_QUAD_BASE + 13)
+#define INT_APB_DMA_CH6			(INT_QUAD_BASE + 14)
+#define INT_APB_DMA_CH7			(INT_QUAD_BASE + 15)
+#define INT_APB_DMA_CH8			(INT_QUAD_BASE + 16)
+#define INT_APB_DMA_CH9			(INT_QUAD_BASE + 17)
+#define INT_APB_DMA_CH10		(INT_QUAD_BASE + 18)
+#define INT_APB_DMA_CH11		(INT_QUAD_BASE + 19)
+#define INT_APB_DMA_CH12		(INT_QUAD_BASE + 20)
+#define INT_APB_DMA_CH13		(INT_QUAD_BASE + 21)
+#define INT_APB_DMA_CH14		(INT_QUAD_BASE + 22)
+#define INT_APB_DMA_CH15		(INT_QUAD_BASE + 23)
+#define INT_QUAD_RES_24			(INT_QUAD_BASE + 24)
+#define INT_QUAD_RES_25			(INT_QUAD_BASE + 25)
+#define INT_QUAD_RES_26			(INT_QUAD_BASE + 26)
+#define INT_QUAD_RES_27			(INT_QUAD_BASE + 27)
+#define INT_QUAD_RES_28			(INT_QUAD_BASE + 28)
+#define INT_QUAD_RES_29			(INT_QUAD_BASE + 29)
+#define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
+#define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
+
+#define INT_GPIO_BASE			(INT_QUAD_BASE + 32)
+#define INT_GPIO_NR			(28 * 8)
+
+#define NR_IRQS				(INT_GPIO_BASE + INT_GPIO_NR)
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
new file mode 100644
index 00000000000..6151bab62af
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-tegra/include/mach/memory.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_MEMORY_H
+#define __MACH_TEGRA_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0)
+
+#endif
+
diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
new file mode 100644
index 00000000000..41c8ce5b7c2
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/pinmux.h
@@ -0,0 +1,348 @@
+/*
+ * linux/arch/arm/mach-tegra/include/mach/pinmux.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_PINMUX_H
+#define __MACH_TEGRA_PINMUX_H
+
+enum tegra_pingroup {
+	TEGRA_PINGROUP_ATA = 0,
+	TEGRA_PINGROUP_ATB,
+	TEGRA_PINGROUP_ATC,
+	TEGRA_PINGROUP_ATD,
+	TEGRA_PINGROUP_ATE,
+	TEGRA_PINGROUP_CDEV1,
+	TEGRA_PINGROUP_CDEV2,
+	TEGRA_PINGROUP_CRTP,
+	TEGRA_PINGROUP_CSUS,
+	TEGRA_PINGROUP_DAP1,
+	TEGRA_PINGROUP_DAP2,
+	TEGRA_PINGROUP_DAP3,
+	TEGRA_PINGROUP_DAP4,
+	TEGRA_PINGROUP_DDC,
+	TEGRA_PINGROUP_DTA,
+	TEGRA_PINGROUP_DTB,
+	TEGRA_PINGROUP_DTC,
+	TEGRA_PINGROUP_DTD,
+	TEGRA_PINGROUP_DTE,
+	TEGRA_PINGROUP_DTF,
+	TEGRA_PINGROUP_GMA,
+	TEGRA_PINGROUP_GMB,
+	TEGRA_PINGROUP_GMC,
+	TEGRA_PINGROUP_GMD,
+	TEGRA_PINGROUP_GME,
+	TEGRA_PINGROUP_GPU,
+	TEGRA_PINGROUP_GPU7,
+	TEGRA_PINGROUP_GPV,
+	TEGRA_PINGROUP_HDINT,
+	TEGRA_PINGROUP_I2CP,
+	TEGRA_PINGROUP_IRRX,
+	TEGRA_PINGROUP_IRTX,
+	TEGRA_PINGROUP_KBCA,
+	TEGRA_PINGROUP_KBCB,
+	TEGRA_PINGROUP_KBCC,
+	TEGRA_PINGROUP_KBCD,
+	TEGRA_PINGROUP_KBCE,
+	TEGRA_PINGROUP_KBCF,
+	TEGRA_PINGROUP_LCSN,
+	TEGRA_PINGROUP_LD0,
+	TEGRA_PINGROUP_LD1,
+	TEGRA_PINGROUP_LD10,
+	TEGRA_PINGROUP_LD11,
+	TEGRA_PINGROUP_LD12,
+	TEGRA_PINGROUP_LD13,
+	TEGRA_PINGROUP_LD14,
+	TEGRA_PINGROUP_LD15,
+	TEGRA_PINGROUP_LD16,
+	TEGRA_PINGROUP_LD17,
+	TEGRA_PINGROUP_LD2,
+	TEGRA_PINGROUP_LD3,
+	TEGRA_PINGROUP_LD4,
+	TEGRA_PINGROUP_LD5,
+	TEGRA_PINGROUP_LD6,
+	TEGRA_PINGROUP_LD7,
+	TEGRA_PINGROUP_LD8,
+	TEGRA_PINGROUP_LD9,
+	TEGRA_PINGROUP_LDC,
+	TEGRA_PINGROUP_LDI,
+	TEGRA_PINGROUP_LHP0,
+	TEGRA_PINGROUP_LHP1,
+	TEGRA_PINGROUP_LHP2,
+	TEGRA_PINGROUP_LHS,
+	TEGRA_PINGROUP_LM0,
+	TEGRA_PINGROUP_LM1,
+	TEGRA_PINGROUP_LPP,
+	TEGRA_PINGROUP_LPW0,
+	TEGRA_PINGROUP_LPW1,
+	TEGRA_PINGROUP_LPW2,
+	TEGRA_PINGROUP_LSC0,
+	TEGRA_PINGROUP_LSC1,
+	TEGRA_PINGROUP_LSCK,
+	TEGRA_PINGROUP_LSDA,
+	TEGRA_PINGROUP_LSDI,
+	TEGRA_PINGROUP_LSPI,
+	TEGRA_PINGROUP_LVP0,
+	TEGRA_PINGROUP_LVP1,
+	TEGRA_PINGROUP_LVS,
+	TEGRA_PINGROUP_OWC,
+	TEGRA_PINGROUP_PMC,
+	TEGRA_PINGROUP_PTA,
+	TEGRA_PINGROUP_RM,
+	TEGRA_PINGROUP_SDB,
+	TEGRA_PINGROUP_SDC,
+	TEGRA_PINGROUP_SDD,
+	TEGRA_PINGROUP_SDIO1,
+	TEGRA_PINGROUP_SLXA,
+	TEGRA_PINGROUP_SLXC,
+	TEGRA_PINGROUP_SLXD,
+	TEGRA_PINGROUP_SLXK,
+	TEGRA_PINGROUP_SPDI,
+	TEGRA_PINGROUP_SPDO,
+	TEGRA_PINGROUP_SPIA,
+	TEGRA_PINGROUP_SPIB,
+	TEGRA_PINGROUP_SPIC,
+	TEGRA_PINGROUP_SPID,
+	TEGRA_PINGROUP_SPIE,
+	TEGRA_PINGROUP_SPIF,
+	TEGRA_PINGROUP_SPIG,
+	TEGRA_PINGROUP_SPIH,
+	TEGRA_PINGROUP_UAA,
+	TEGRA_PINGROUP_UAB,
+	TEGRA_PINGROUP_UAC,
+	TEGRA_PINGROUP_UAD,
+	TEGRA_PINGROUP_UCA,
+	TEGRA_PINGROUP_UCB,
+	TEGRA_PINGROUP_UDA,
+	/* these pin groups only have pullup and pull down control */
+	TEGRA_PINGROUP_CK32,
+	TEGRA_PINGROUP_DDRC,
+	TEGRA_PINGROUP_PMCA,
+	TEGRA_PINGROUP_PMCB,
+	TEGRA_PINGROUP_PMCC,
+	TEGRA_PINGROUP_PMCD,
+	TEGRA_PINGROUP_PMCE,
+	TEGRA_PINGROUP_XM2C,
+	TEGRA_PINGROUP_XM2D,
+	TEGRA_MAX_PINGROUP,
+};
+
+enum tegra_mux_func {
+	TEGRA_MUX_RSVD = 0x8000,
+	TEGRA_MUX_RSVD1 = 0x8000,
+	TEGRA_MUX_RSVD2 = 0x8001,
+	TEGRA_MUX_RSVD3 = 0x8002,
+	TEGRA_MUX_RSVD4 = 0x8003,
+	TEGRA_MUX_NONE = -1,
+	TEGRA_MUX_AHB_CLK,
+	TEGRA_MUX_APB_CLK,
+	TEGRA_MUX_AUDIO_SYNC,
+	TEGRA_MUX_CRT,
+	TEGRA_MUX_DAP1,
+	TEGRA_MUX_DAP2,
+	TEGRA_MUX_DAP3,
+	TEGRA_MUX_DAP4,
+	TEGRA_MUX_DAP5,
+	TEGRA_MUX_DISPLAYA,
+	TEGRA_MUX_DISPLAYB,
+	TEGRA_MUX_EMC_TEST0_DLL,
+	TEGRA_MUX_EMC_TEST1_DLL,
+	TEGRA_MUX_GMI,
+	TEGRA_MUX_GMI_INT,
+	TEGRA_MUX_HDMI,
+	TEGRA_MUX_I2C,
+	TEGRA_MUX_I2C2,
+	TEGRA_MUX_I2C3,
+	TEGRA_MUX_IDE,
+	TEGRA_MUX_IRDA,
+	TEGRA_MUX_KBC,
+	TEGRA_MUX_MIO,
+	TEGRA_MUX_MIPI_HS,
+	TEGRA_MUX_NAND,
+	TEGRA_MUX_OSC,
+	TEGRA_MUX_OWR,
+	TEGRA_MUX_PCIE,
+	TEGRA_MUX_PLLA_OUT,
+	TEGRA_MUX_PLLC_OUT1,
+	TEGRA_MUX_PLLM_OUT1,
+	TEGRA_MUX_PLLP_OUT2,
+	TEGRA_MUX_PLLP_OUT3,
+	TEGRA_MUX_PLLP_OUT4,
+	TEGRA_MUX_PWM,
+	TEGRA_MUX_PWR_INTR,
+	TEGRA_MUX_PWR_ON,
+	TEGRA_MUX_RTCK,
+	TEGRA_MUX_SDIO1,
+	TEGRA_MUX_SDIO2,
+	TEGRA_MUX_SDIO3,
+	TEGRA_MUX_SDIO4,
+	TEGRA_MUX_SFLASH,
+	TEGRA_MUX_SPDIF,
+	TEGRA_MUX_SPI1,
+	TEGRA_MUX_SPI2,
+	TEGRA_MUX_SPI2_ALT,
+	TEGRA_MUX_SPI3,
+	TEGRA_MUX_SPI4,
+	TEGRA_MUX_TRACE,
+	TEGRA_MUX_TWC,
+	TEGRA_MUX_UARTA,
+	TEGRA_MUX_UARTB,
+	TEGRA_MUX_UARTC,
+	TEGRA_MUX_UARTD,
+	TEGRA_MUX_UARTE,
+	TEGRA_MUX_ULPI,
+	TEGRA_MUX_VI,
+	TEGRA_MUX_VI_SENSOR_CLK,
+	TEGRA_MUX_XIO,
+	TEGRA_MAX_MUX,
+};
+
+enum tegra_pullupdown {
+	TEGRA_PUPD_NORMAL = 0,
+	TEGRA_PUPD_PULL_DOWN,
+	TEGRA_PUPD_PULL_UP,
+};
+
+enum tegra_tristate {
+	TEGRA_TRI_NORMAL = 0,
+	TEGRA_TRI_TRISTATE = 1,
+};
+
+struct tegra_pingroup_config {
+	enum tegra_pingroup	pingroup;
+	enum tegra_mux_func	func;
+	enum tegra_pullupdown	pupd;
+	enum tegra_tristate	tristate;
+};
+
+enum tegra_slew {
+	TEGRA_SLEW_FASTEST = 0,
+	TEGRA_SLEW_FAST,
+	TEGRA_SLEW_SLOW,
+	TEGRA_SLEW_SLOWEST,
+	TEGRA_MAX_SLEW,
+};
+
+enum tegra_pull_strength {
+	TEGRA_PULL_0 = 0,
+	TEGRA_PULL_1,
+	TEGRA_PULL_2,
+	TEGRA_PULL_3,
+	TEGRA_PULL_4,
+	TEGRA_PULL_5,
+	TEGRA_PULL_6,
+	TEGRA_PULL_7,
+	TEGRA_PULL_8,
+	TEGRA_PULL_9,
+	TEGRA_PULL_10,
+	TEGRA_PULL_11,
+	TEGRA_PULL_12,
+	TEGRA_PULL_13,
+	TEGRA_PULL_14,
+	TEGRA_PULL_15,
+	TEGRA_PULL_16,
+	TEGRA_PULL_17,
+	TEGRA_PULL_18,
+	TEGRA_PULL_19,
+	TEGRA_PULL_20,
+	TEGRA_PULL_21,
+	TEGRA_PULL_22,
+	TEGRA_PULL_23,
+	TEGRA_PULL_24,
+	TEGRA_PULL_25,
+	TEGRA_PULL_26,
+	TEGRA_PULL_27,
+	TEGRA_PULL_28,
+	TEGRA_PULL_29,
+	TEGRA_PULL_30,
+	TEGRA_PULL_31,
+	TEGRA_MAX_PULL,
+};
+
+enum tegra_drive_pingroup {
+	TEGRA_DRIVE_PINGROUP_AO1 = 0,
+	TEGRA_DRIVE_PINGROUP_AO2,
+	TEGRA_DRIVE_PINGROUP_AT1,
+	TEGRA_DRIVE_PINGROUP_AT2,
+	TEGRA_DRIVE_PINGROUP_CDEV1,
+	TEGRA_DRIVE_PINGROUP_CDEV2,
+	TEGRA_DRIVE_PINGROUP_CSUS,
+	TEGRA_DRIVE_PINGROUP_DAP1,
+	TEGRA_DRIVE_PINGROUP_DAP2,
+	TEGRA_DRIVE_PINGROUP_DAP3,
+	TEGRA_DRIVE_PINGROUP_DAP4,
+	TEGRA_DRIVE_PINGROUP_DBG,
+	TEGRA_DRIVE_PINGROUP_LCD1,
+	TEGRA_DRIVE_PINGROUP_LCD2,
+	TEGRA_DRIVE_PINGROUP_SDMMC2,
+	TEGRA_DRIVE_PINGROUP_SDMMC3,
+	TEGRA_DRIVE_PINGROUP_SPI,
+	TEGRA_DRIVE_PINGROUP_UAA,
+	TEGRA_DRIVE_PINGROUP_UAB,
+	TEGRA_DRIVE_PINGROUP_UART2,
+	TEGRA_DRIVE_PINGROUP_UART3,
+	TEGRA_DRIVE_PINGROUP_VI1,
+	TEGRA_DRIVE_PINGROUP_VI2,
+	TEGRA_DRIVE_PINGROUP_XM2A,
+	TEGRA_DRIVE_PINGROUP_XM2C,
+	TEGRA_DRIVE_PINGROUP_XM2D,
+	TEGRA_DRIVE_PINGROUP_XM2CLK,
+	TEGRA_DRIVE_PINGROUP_MEMCOMP,
+	TEGRA_MAX_DRIVE_PINGROUP,
+};
+
+enum tegra_drive {
+	TEGRA_DRIVE_DIV_8 = 0,
+	TEGRA_DRIVE_DIV_4,
+	TEGRA_DRIVE_DIV_2,
+	TEGRA_DRIVE_DIV_1,
+	TEGRA_MAX_DRIVE,
+};
+
+enum tegra_hsm {
+	TEGRA_HSM_DISABLE = 0,
+	TEGRA_HSM_ENABLE,
+};
+
+enum tegra_schmitt {
+	TEGRA_SCHMITT_DISABLE = 0,
+	TEGRA_SCHMITT_ENABLE,
+};
+
+struct tegra_drive_pingroup_config {
+	enum tegra_drive_pingroup pingroup;
+	enum tegra_hsm hsm;
+	enum tegra_schmitt schmitt;
+	enum tegra_drive drive;
+	enum tegra_pull_strength pull_down;
+	enum tegra_pull_strength pull_up;
+	enum tegra_slew slew_rising;
+	enum tegra_slew slew_falling;
+};
+
+int tegra_pinmux_set_func(enum tegra_pingroup pg, enum tegra_mux_func func);
+int tegra_pinmux_set_tristate(enum tegra_pingroup pg, enum tegra_tristate tristate);
+int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg, enum tegra_pullupdown pupd);
+
+void tegra_pinmux_config_pingroup(enum tegra_pingroup pingroup,
+	enum tegra_mux_func func, enum tegra_pullupdown pupd,
+	enum tegra_tristate tristate);
+
+void tegra_pinmux_config_table(struct tegra_pingroup_config *config, int len);
+
+void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
+	int len);
+
+#endif
+
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
new file mode 100644
index 00000000000..8b42dab79a7
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -0,0 +1,30 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
new file mode 100644
index 00000000000..84d5d46113f
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/system.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_SYSTEM_H
+#define __MACH_TEGRA_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/iomap.h>
+
+static inline void arch_idle(void)
+{
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *reset = IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x04);
+	u32 reg = readl(reset);
+	reg |= 0x04;
+	writel(reg, reset);
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/timex.h b/arch/arm/mach-tegra/include/mach/timex.h
new file mode 100644
index 00000000000..a44ccbdb7db
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-tegra/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_TIMEX_H
+#define __MACH_TEGRA_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
new file mode 100644
index 00000000000..6c4dd815abd
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-tegra/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_UNCOMPRESS_H
+#define __MACH_TEGRA_UNCOMPRESS_H
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <mach/iomap.h>
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+#define DEBUG_UART_BASE TEGRA_UARTA_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+#define DEBUG_UART_BASE TEGRA_UARTB_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+#define DEBUG_UART_BASE TEGRA_UARTC_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+#define DEBUG_UART_BASE TEGRA_UARTD_BASE
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+#define DEBUG_UART_BASE TEGRA_UARTE_BASE
+#else
+#define DEBUG_UART_BASE NULL
+#endif
+
+static void putc(int c)
+{
+	volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE;
+	int shift = 2;
+
+	if (uart == NULL)
+		return;
+
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	volatile u8 *uart = (volatile u8 *)DEBUG_UART_BASE;
+	int shift = 2;
+
+	if (uart == NULL)
+		return;
+
+	uart[UART_LCR << shift] |= UART_LCR_DLAB;
+	uart[UART_DLL << shift] = 0x75;
+	uart[UART_DLM << shift] = 0x0;
+	uart[UART_LCR << shift] = 3;
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/vmalloc.h b/arch/arm/mach-tegra/include/mach/vmalloc.h
new file mode 100644
index 00000000000..267a141730d
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/vmalloc.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-tegra/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_VMALLOC_H
+#define __MACH_TEGRA_VMALLOC_H
+
+#include <asm/sizes.h>
+
+#define VMALLOC_END        0xFE000000
+
+#endif
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
new file mode 100644
index 00000000000..9fe2c5c683d
--- /dev/null
+++ b/arch/arm/mach-tegra/io.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-tegra/io.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+
+#include "board.h"
+
+static struct map_desc tegra_io_desc[] __initdata = {
+	{
+		.virtual = IO_PPSB_VIRT,
+		.pfn = __phys_to_pfn(IO_PPSB_PHYS),
+		.length = IO_PPSB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = IO_APB_VIRT,
+		.pfn = __phys_to_pfn(IO_APB_PHYS),
+		.length = IO_APB_SIZE,
+		.type = MT_DEVICE,
+	},
+	{
+		.virtual = IO_CPU_VIRT,
+		.pfn = __phys_to_pfn(IO_CPU_PHYS),
+		.length = IO_CPU_SIZE,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init tegra_map_common_io(void)
+{
+	iotable_init(tegra_io_desc, ARRAY_SIZE(tegra_io_desc));
+}
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *tegra_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+	void __iomem *v = IO_ADDRESS(p);
+	if (v == NULL)
+		v = __arm_ioremap(p, size, type);
+	return v;
+}
+EXPORT_SYMBOL(tegra_ioremap);
+
+void tegra_iounmap(volatile void __iomem *addr)
+{
+	unsigned long virt = (unsigned long)addr;
+
+	if (virt >= VMALLOC_START && virt < VMALLOC_END)
+		__iounmap(addr);
+}
+EXPORT_SYMBOL(tegra_iounmap);
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
new file mode 100644
index 00000000000..1fdbe708d43
--- /dev/null
+++ b/arch/arm/mach-tegra/irq.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/gic.h>
+
+#include <mach/iomap.h>
+
+#include "board.h"
+
+void __init tegra_init_irq(void)
+{
+	gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29);
+	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+}
diff --git a/arch/arm/mach-tegra/localtimer.c b/arch/arm/mach-tegra/localtimer.c
new file mode 100644
index 00000000000..f81ca7cbbc1
--- /dev/null
+++ b/arch/arm/mach-tegra/localtimer.c
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-tegra/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
new file mode 100644
index 00000000000..13ae10237e8
--- /dev/null
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -0,0 +1,945 @@
+/*
+ * linux/arch/arm/mach-tegra/pinmux.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <mach/iomap.h>
+#include <mach/pinmux.h>
+
+
+#define TEGRA_TRI_STATE(x)	(0x14 + (4 * (x)))
+#define TEGRA_PP_MUX_CTL(x)	(0x80 + (4 * (x)))
+#define TEGRA_PP_PU_PD(x)	(0xa0 + (4 * (x)))
+
+#define REG_A 0
+#define REG_B 1
+#define REG_C 2
+#define REG_D 3
+#define REG_E 4
+#define REG_F 5
+#define REG_G 6
+
+#define REG_N -1
+
+#define HSM_EN(reg)	(((reg) >> 2) & 0x1)
+#define SCHMT_EN(reg)	(((reg) >> 3) & 0x1)
+#define LPMD(reg)	(((reg) >> 4) & 0x3)
+#define DRVDN(reg)	(((reg) >> 12) & 0x1f)
+#define DRVUP(reg)	(((reg) >> 20) & 0x1f)
+#define SLWR(reg)	(((reg) >> 28) & 0x3)
+#define SLWF(reg)	(((reg) >> 30) & 0x3)
+
+struct tegra_pingroup_desc {
+	const char *name;
+	int funcs[4];
+	s8 tri_reg; 	/* offset into the TRISTATE_REG_* register bank */
+	s8 tri_bit; 	/* offset into the TRISTATE_REG_* register bit */
+	s8 mux_reg;	/* offset into the PIN_MUX_CTL_* register bank */
+	s8 mux_bit;	/* offset into the PIN_MUX_CTL_* register bit */
+	s8 pupd_reg;	/* offset into the PULL_UPDOWN_REG_* register bank */
+	s8 pupd_bit;	/* offset into the PULL_UPDOWN_REG_* register bit */
+};
+
+#define PINGROUP(pg_name, f0, f1, f2, f3,			\
+		 tri_r, tri_b, mux_r, mux_b, pupd_r, pupd_b)	\
+	[TEGRA_PINGROUP_ ## pg_name] = {			\
+		.name = #pg_name,				\
+		.funcs = {					\
+			TEGRA_MUX_ ## f0,			\
+			TEGRA_MUX_ ## f1,			\
+			TEGRA_MUX_ ## f2,			\
+			TEGRA_MUX_ ## f3,			\
+		},						\
+		.tri_reg = REG_ ## tri_r,			\
+		.tri_bit = tri_b,				\
+		.mux_reg = REG_ ## mux_r,			\
+		.mux_bit = mux_b,				\
+		.pupd_reg = REG_ ## pupd_r,			\
+		.pupd_bit = pupd_b,				\
+	}
+
+static const struct tegra_pingroup_desc pingroups[TEGRA_MAX_PINGROUP] = {
+	PINGROUP(ATA,   IDE,       NAND,      GMI,       RSVD,          A, 0,  A, 24, A, 0),
+	PINGROUP(ATB,   IDE,       NAND,      GMI,       SDIO4,         A, 1,  A, 16, A, 2),
+	PINGROUP(ATC,   IDE,       NAND,      GMI,       SDIO4,         A, 2,  A, 22, A, 4),
+	PINGROUP(ATD,   IDE,       NAND,      GMI,       SDIO4,         A, 3,  A, 20, A, 6),
+	PINGROUP(ATE,   IDE,       NAND,      GMI,       RSVD,          B, 25, A, 12, A, 8),
+	PINGROUP(CDEV1, OSC,       PLLA_OUT,  PLLM_OUT1, AUDIO_SYNC,    A, 4,  C, 2,  C, 0),
+	PINGROUP(CDEV2, OSC,       AHB_CLK,   APB_CLK,   PLLP_OUT4,     A, 5,  C, 4,  C, 2),
+	PINGROUP(CRTP,  CRT,       RSVD,      RSVD,      RSVD,          D, 14, G, 20, B, 24),
+	PINGROUP(CSUS,  PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK, A, 6,  C, 6,  D, 24),
+	PINGROUP(DAP1,  DAP1,      RSVD,      GMI,       SDIO2,         A, 7,  C, 20, A, 10),
+	PINGROUP(DAP2,  DAP2,      TWC,       RSVD,      GMI,           A, 8,  C, 22, A, 12),
+	PINGROUP(DAP3,  DAP3,      RSVD,      RSVD,      RSVD,          A, 9,  C, 24, A, 14),
+	PINGROUP(DAP4,  DAP4,      RSVD,      GMI,       RSVD,          A, 10, C, 26, A, 16),
+	PINGROUP(DDC,   I2C2,      RSVD,      RSVD,      RSVD,          B, 31, C, 0,  E, 28),
+	PINGROUP(DTA,   RSVD,      SDIO2,     VI,        RSVD,          A, 11, B, 20, A, 18),
+	PINGROUP(DTB,   RSVD,      RSVD,      VI,        SPI1,          A, 12, B, 22, A, 20),
+	PINGROUP(DTC,   RSVD,      RSVD,      VI,        RSVD,          A, 13, B, 26, A, 22),
+	PINGROUP(DTD,   RSVD,      SDIO2,     VI,        RSVD,          A, 14, B, 28, A, 24),
+	PINGROUP(DTE,   RSVD,      RSVD,      VI,        SPI1,          A, 15, B, 30, A, 26),
+	PINGROUP(DTF,   I2C3,      RSVD,      VI,        RSVD,          D, 12, G, 30, A, 28),
+	PINGROUP(GMA,   UARTE,     SPI3,      GMI,       SDIO4,         A, 28, B, 0,  E, 20),
+	PINGROUP(GMB,   IDE,       NAND,      GMI,       GMI_INT,       B, 29, C, 28, E, 22),
+	PINGROUP(GMC,   UARTD,     SPI4,      GMI,       SFLASH,        A, 29, B, 2,  E, 24),
+	PINGROUP(GMD,   RSVD,      NAND,      GMI,       SFLASH,        B, 30, C, 30, E, 26),
+	PINGROUP(GME,   RSVD,      DAP5,      GMI,       SDIO4,         B, 0,  D, 0,  C, 24),
+	PINGROUP(GPU,   PWM,       UARTA,     GMI,       RSVD,          A, 16, D, 4,  B, 20),
+	PINGROUP(GPU7,  RTCK,      RSVD,      RSVD,      RSVD,          D, 11, G, 28, B, 6),
+	PINGROUP(GPV,   PCIE,      RSVD,      RSVD,      RSVD,          A, 17, D, 2,  A, 30),
+	PINGROUP(HDINT, HDMI,      RSVD,      RSVD,      RSVD,          C, 23, B, 4,  D, 22),
+	PINGROUP(I2CP,  I2C,       RSVD,      RSVD,      RSVD,          A, 18, C, 8,  B, 2),
+	PINGROUP(IRRX,  UARTA,     UARTB,     GMI,       SPI4,          A, 20, C, 18, C, 22),
+	PINGROUP(IRTX,  UARTA,     UARTB,     GMI,       SPI4,          A, 19, C, 16, C, 20),
+	PINGROUP(KBCA,  KBC,       NAND,      SDIO2,     EMC_TEST0_DLL, A, 22, C, 10, B, 8),
+	PINGROUP(KBCB,  KBC,       NAND,      SDIO2,     MIO,           A, 21, C, 12, B, 10),
+	PINGROUP(KBCC,  KBC,       NAND,      TRACE,     EMC_TEST1_DLL, B, 26, C, 14, B, 12),
+	PINGROUP(KBCD,  KBC,       NAND,      SDIO2,     MIO,           D, 10, G, 26, B, 14),
+	PINGROUP(KBCE,  KBC,       NAND,      OWR,       RSVD,          A, 26, A, 28, E, 2),
+	PINGROUP(KBCF,  KBC,       NAND,      TRACE,     MIO,           A, 27, A, 26, E, 0),
+	PINGROUP(LCSN,  DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          C, 31, E, 12, D, 20),
+	PINGROUP(LD0,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 0,  F, 0,  D, 12),
+	PINGROUP(LD1,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 1,  F, 2,  D, 12),
+	PINGROUP(LD10,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 10, F, 20, D, 12),
+	PINGROUP(LD11,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 11, F, 22, D, 12),
+	PINGROUP(LD12,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 12, F, 24, D, 12),
+	PINGROUP(LD13,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 13, F, 26, D, 12),
+	PINGROUP(LD14,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 14, F, 28, D, 12),
+	PINGROUP(LD15,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 15, F, 30, D, 12),
+	PINGROUP(LD16,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 16, G, 0,  D, 12),
+	PINGROUP(LD17,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 17, G, 2,  D, 12),
+	PINGROUP(LD2,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 2,  F, 4,  D, 12),
+	PINGROUP(LD3,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 3,  F, 6,  D, 12),
+	PINGROUP(LD4,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 4,  F, 8,  D, 12),
+	PINGROUP(LD5,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 5,  F, 10, D, 12),
+	PINGROUP(LD6,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 6,  F, 12, D, 12),
+	PINGROUP(LD7,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 7,  F, 14, D, 12),
+	PINGROUP(LD8,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 8,  F, 16, D, 12),
+	PINGROUP(LD9,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 9,  F, 18, D, 12),
+	PINGROUP(LDC,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 30, E, 14, D, 20),
+	PINGROUP(LDI,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          D, 6,  G, 16, D, 18),
+	PINGROUP(LHP0,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 18, G, 10, D, 16),
+	PINGROUP(LHP1,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 19, G, 4,  D, 14),
+	PINGROUP(LHP2,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 20, G, 6,  D, 14),
+	PINGROUP(LHS,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          D, 7,  E, 22, D, 22),
+	PINGROUP(LM0,   DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          C, 24, E, 26, D, 22),
+	PINGROUP(LM1,   DISPLAYA,  DISPLAYB,  RSVD,      CRT,           C, 25, E, 28, D, 22),
+	PINGROUP(LPP,   DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          D, 8,  G, 14, D, 18),
+	PINGROUP(LPW0,  DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          D, 3,  E, 0,  D, 20),
+	PINGROUP(LPW1,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          D, 4,  E, 2,  D, 20),
+	PINGROUP(LPW2,  DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          D, 5,  E, 4,  D, 20),
+	PINGROUP(LSC0,  DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 27, E, 18, D, 22),
+	PINGROUP(LSC1,  DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          C, 28, E, 20, D, 20),
+	PINGROUP(LSCK,  DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          C, 29, E, 16, D, 20),
+	PINGROUP(LSDA,  DISPLAYA,  DISPLAYB,  SPI3,      HDMI,          D, 1,  E, 8,  D, 20),
+	PINGROUP(LSDI,  DISPLAYA,  DISPLAYB,  SPI3,      RSVD,          D, 2,  E, 6,  D, 20),
+	PINGROUP(LSPI,  DISPLAYA,  DISPLAYB,  XIO,       HDMI,          D, 0,  E, 10, D, 22),
+	PINGROUP(LVP0,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 21, E, 30, D, 22),
+	PINGROUP(LVP1,  DISPLAYA,  DISPLAYB,  RSVD,      RSVD,          C, 22, G, 8,  D, 16),
+	PINGROUP(LVS,   DISPLAYA,  DISPLAYB,  XIO,       RSVD,          C, 26, E, 24, D, 22),
+	PINGROUP(OWC,   OWR,       RSVD,      RSVD,      RSVD,          A, 31, B, 8,  E, 30),
+	PINGROUP(PMC,   PWR_ON,    PWR_INTR,  RSVD,      RSVD,          A, 23, G, 18, N, -1),
+	PINGROUP(PTA,   I2C2,      HDMI,      GMI,       RSVD,          A, 24, G, 22, B, 4),
+	PINGROUP(RM,    I2C,       RSVD,      RSVD,      RSVD,          A, 25, A, 14, B, 0),
+	PINGROUP(SDB,   UARTA,     PWM,       SDIO3,     SPI2,          D, 15, D, 10, N, -1),
+	PINGROUP(SDC,   PWM,       TWC,       SDIO3,     SPI3,          B, 1,  D, 12, D, 28),
+	PINGROUP(SDD,   UARTA,     PWM,       SDIO3,     SPI3,          B, 2,  D, 14, D, 30),
+	PINGROUP(SDIO1, SDIO1,     RSVD,      UARTE,     UARTA,         A, 30, A, 30, E, 18),
+	PINGROUP(SLXA,  PCIE,      SPI4,      SDIO3,     SPI2,          B, 3,  B, 6,  B, 22),
+	PINGROUP(SLXC,  SPDIF,     SPI4,      SDIO3,     SPI2,          B, 5,  B, 10, B, 26),
+	PINGROUP(SLXD,  SPDIF,     SPI4,      SDIO3,     SPI2,          B, 6,  B, 12, B, 28),
+	PINGROUP(SLXK,  PCIE,      SPI4,      SDIO3,     SPI2,          B, 7,  B, 14, B, 30),
+	PINGROUP(SPDI,  SPDIF,     RSVD,      I2C,       SDIO2,         B, 8,  D, 8,  B, 16),
+	PINGROUP(SPDO,  SPDIF,     RSVD,      I2C,       SDIO2,         B, 9,  D, 6,  B, 18),
+	PINGROUP(SPIA,  SPI1,      SPI2,      SPI3,      GMI,           B, 10, D, 30, C, 4),
+	PINGROUP(SPIB,  SPI1,      SPI2,      SPI3,      GMI,           B, 11, D, 28, C, 6),
+	PINGROUP(SPIC,  SPI1,      SPI2,      SPI3,      GMI,           B, 12, D, 26, C, 8),
+	PINGROUP(SPID,  SPI2,      SPI1,      SPI2_ALT,  GMI,           B, 13, D, 24, C, 10),
+	PINGROUP(SPIE,  SPI2,      SPI1,      SPI2_ALT,  GMI,           B, 14, D, 22, C, 12),
+	PINGROUP(SPIF,  SPI3,      SPI1,      SPI2,      RSVD,          B, 15, D, 20, C, 14),
+	PINGROUP(SPIG,  SPI3,      SPI2,      SPI2_ALT,  I2C,           B, 16, D, 18, C, 16),
+	PINGROUP(SPIH,  SPI3,      SPI2,      SPI2_ALT,  I2C,           B, 17, D, 16, C, 18),
+	PINGROUP(UAA,   SPI3,      MIPI_HS,   UARTA,     ULPI,          B, 18, A, 0,  D, 0),
+	PINGROUP(UAB,   SPI2,      MIPI_HS,   UARTA,     ULPI,          B, 19, A, 2,  D, 2),
+	PINGROUP(UAC,   OWR,       RSVD,      RSVD,      RSVD,          B, 20, A, 4,  D, 4),
+	PINGROUP(UAD,   IRDA,      SPDIF,     UARTA,     SPI4,          B, 21, A, 6,  D, 6),
+	PINGROUP(UCA,   UARTC,     RSVD,      GMI,       RSVD,          B, 22, B, 16, D, 8),
+	PINGROUP(UCB,   UARTC,     PWM,       GMI,       RSVD,          B, 23, B, 18, D, 10),
+	PINGROUP(UDA,   SPI1,      RSVD,      UARTD,     ULPI,          D, 13, A, 8,  E, 16),
+	/* these pin groups only have pullup and pull down control */
+	PINGROUP(CK32,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 14),
+	PINGROUP(DDRC,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  D, 26),
+	PINGROUP(PMCA,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 4),
+	PINGROUP(PMCB,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 6),
+	PINGROUP(PMCC,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 8),
+	PINGROUP(PMCD,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 10),
+	PINGROUP(PMCE,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  E, 12),
+	PINGROUP(XM2C,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  C, 30),
+	PINGROUP(XM2D,  RSVD,      RSVD,      RSVD,      RSVD,          N, -1,  N, -1,  C, 28),
+};
+
+static char *tegra_mux_names[TEGRA_MAX_MUX] = {
+	[TEGRA_MUX_AHB_CLK] = "AHB_CLK",
+	[TEGRA_MUX_APB_CLK] = "APB_CLK",
+	[TEGRA_MUX_AUDIO_SYNC] = "AUDIO_SYNC",
+	[TEGRA_MUX_CRT] = "CRT",
+	[TEGRA_MUX_DAP1] = "DAP1",
+	[TEGRA_MUX_DAP2] = "DAP2",
+	[TEGRA_MUX_DAP3] = "DAP3",
+	[TEGRA_MUX_DAP4] = "DAP4",
+	[TEGRA_MUX_DAP5] = "DAP5",
+	[TEGRA_MUX_DISPLAYA] = "DISPLAYA",
+	[TEGRA_MUX_DISPLAYB] = "DISPLAYB",
+	[TEGRA_MUX_EMC_TEST0_DLL] = "EMC_TEST0_DLL",
+	[TEGRA_MUX_EMC_TEST1_DLL] = "EMC_TEST1_DLL",
+	[TEGRA_MUX_GMI] = "GMI",
+	[TEGRA_MUX_GMI_INT] = "GMI_INT",
+	[TEGRA_MUX_HDMI] = "HDMI",
+	[TEGRA_MUX_I2C] = "I2C",
+	[TEGRA_MUX_I2C2] = "I2C2",
+	[TEGRA_MUX_I2C3] = "I2C3",
+	[TEGRA_MUX_IDE] = "IDE",
+	[TEGRA_MUX_IRDA] = "IRDA",
+	[TEGRA_MUX_KBC] = "KBC",
+	[TEGRA_MUX_MIO] = "MIO",
+	[TEGRA_MUX_MIPI_HS] = "MIPI_HS",
+	[TEGRA_MUX_NAND] = "NAND",
+	[TEGRA_MUX_OSC] = "OSC",
+	[TEGRA_MUX_OWR] = "OWR",
+	[TEGRA_MUX_PCIE] = "PCIE",
+	[TEGRA_MUX_PLLA_OUT] = "PLLA_OUT",
+	[TEGRA_MUX_PLLC_OUT1] = "PLLC_OUT1",
+	[TEGRA_MUX_PLLM_OUT1] = "PLLM_OUT1",
+	[TEGRA_MUX_PLLP_OUT2] = "PLLP_OUT2",
+	[TEGRA_MUX_PLLP_OUT3] = "PLLP_OUT3",
+	[TEGRA_MUX_PLLP_OUT4] = "PLLP_OUT4",
+	[TEGRA_MUX_PWM] = "PWM",
+	[TEGRA_MUX_PWR_INTR] = "PWR_INTR",
+	[TEGRA_MUX_PWR_ON] = "PWR_ON",
+	[TEGRA_MUX_RTCK] = "RTCK",
+	[TEGRA_MUX_SDIO1] = "SDIO1",
+	[TEGRA_MUX_SDIO2] = "SDIO2",
+	[TEGRA_MUX_SDIO3] = "SDIO3",
+	[TEGRA_MUX_SDIO4] = "SDIO4",
+	[TEGRA_MUX_SFLASH] = "SFLASH",
+	[TEGRA_MUX_SPDIF] = "SPDIF",
+	[TEGRA_MUX_SPI1] = "SPI1",
+	[TEGRA_MUX_SPI2] = "SPI2",
+	[TEGRA_MUX_SPI2_ALT] = "SPI2_ALT",
+	[TEGRA_MUX_SPI3] = "SPI3",
+	[TEGRA_MUX_SPI4] = "SPI4",
+	[TEGRA_MUX_TRACE] = "TRACE",
+	[TEGRA_MUX_TWC] = "TWC",
+	[TEGRA_MUX_UARTA] = "UARTA",
+	[TEGRA_MUX_UARTB] = "UARTB",
+	[TEGRA_MUX_UARTC] = "UARTC",
+	[TEGRA_MUX_UARTD] = "UARTD",
+	[TEGRA_MUX_UARTE] = "UARTE",
+	[TEGRA_MUX_ULPI] = "ULPI",
+	[TEGRA_MUX_VI] = "VI",
+	[TEGRA_MUX_VI_SENSOR_CLK] = "VI_SENSOR_CLK",
+	[TEGRA_MUX_XIO] = "XIO",
+};
+
+struct tegra_drive_pingroup_desc {
+	const char *name;
+	s16 reg;
+};
+
+#define DRIVE_PINGROUP(pg_name, r)				\
+	[TEGRA_DRIVE_PINGROUP_ ## pg_name] = {			\
+		.name = #pg_name,				\
+		.reg = r					\
+	}
+
+static const struct tegra_drive_pingroup_desc drive_pingroups[TEGRA_MAX_PINGROUP] = {
+	DRIVE_PINGROUP(AO1,		0x868),
+	DRIVE_PINGROUP(AO2,		0x86c),
+	DRIVE_PINGROUP(AT1,		0x870),
+	DRIVE_PINGROUP(AT2,		0x874),
+	DRIVE_PINGROUP(CDEV1,		0x878),
+	DRIVE_PINGROUP(CDEV2,		0x87c),
+	DRIVE_PINGROUP(CSUS,		0x880),
+	DRIVE_PINGROUP(DAP1,		0x884),
+	DRIVE_PINGROUP(DAP2,		0x888),
+	DRIVE_PINGROUP(DAP3,		0x88c),
+	DRIVE_PINGROUP(DAP4,		0x890),
+	DRIVE_PINGROUP(DBG,		0x894),
+	DRIVE_PINGROUP(LCD1,		0x898),
+	DRIVE_PINGROUP(LCD2,		0x89c),
+	DRIVE_PINGROUP(SDMMC2,	0x8a0),
+	DRIVE_PINGROUP(SDMMC3,	0x8a4),
+	DRIVE_PINGROUP(SPI,		0x8a8),
+	DRIVE_PINGROUP(UAA,		0x8ac),
+	DRIVE_PINGROUP(UAB,		0x8b0),
+	DRIVE_PINGROUP(UART2,		0x8b4),
+	DRIVE_PINGROUP(UART3,		0x8b8),
+	DRIVE_PINGROUP(VI1,		0x8bc),
+	DRIVE_PINGROUP(VI2,		0x8c0),
+	DRIVE_PINGROUP(XM2A,		0x8c4),
+	DRIVE_PINGROUP(XM2C,		0x8c8),
+	DRIVE_PINGROUP(XM2D,		0x8cc),
+	DRIVE_PINGROUP(XM2CLK,	0x8d0),
+	DRIVE_PINGROUP(MEMCOMP,	0x8d4),
+};
+
+static const char *tegra_drive_names[TEGRA_MAX_DRIVE] = {
+	[TEGRA_DRIVE_DIV_8] = "DIV_8",
+	[TEGRA_DRIVE_DIV_4] = "DIV_4",
+	[TEGRA_DRIVE_DIV_2] = "DIV_2",
+	[TEGRA_DRIVE_DIV_1] = "DIV_1",
+};
+
+static const char *tegra_slew_names[TEGRA_MAX_SLEW] = {
+	[TEGRA_SLEW_FASTEST] = "FASTEST",
+	[TEGRA_SLEW_FAST] = "FAST",
+	[TEGRA_SLEW_SLOW] = "SLOW",
+	[TEGRA_SLEW_SLOWEST] = "SLOWEST",
+};
+
+static DEFINE_SPINLOCK(mux_lock);
+
+static const char *pingroup_name(enum tegra_pingroup pg)
+{
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return "<UNKNOWN>";
+
+	return pingroups[pg].name;
+}
+
+static const char *func_name(enum tegra_mux_func func)
+{
+	if (func == TEGRA_MUX_RSVD1)
+		return "RSVD1";
+
+	if (func == TEGRA_MUX_RSVD2)
+		return "RSVD2";
+
+	if (func == TEGRA_MUX_RSVD3)
+		return "RSVD3";
+
+	if (func == TEGRA_MUX_RSVD4)
+		return "RSVD4";
+
+	if (func == TEGRA_MUX_NONE)
+		return "NONE";
+
+	if (func < 0 || func >=  TEGRA_MAX_MUX)
+		return "<UNKNOWN>";
+
+	return tegra_mux_names[func];
+}
+
+
+static const char *tri_name(unsigned long val)
+{
+	return val ? "TRISTATE" : "NORMAL";
+}
+
+static const char *pupd_name(unsigned long val)
+{
+	switch (val) {
+	case 0:
+		return "NORMAL";
+
+	case 1:
+		return "PULL_DOWN";
+
+	case 2:
+		return "PULL_UP";
+
+	default:
+		return "RSVD";
+	}
+}
+
+
+static inline unsigned long pg_readl(unsigned long offset)
+{
+	return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+static inline void pg_writel(unsigned long value, unsigned long offset)
+{
+	writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+}
+
+int tegra_pinmux_set_func(enum tegra_pingroup pg, enum tegra_mux_func func)
+{
+	int mux = -1;
+	int i;
+	unsigned long reg;
+	unsigned long flags;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].mux_reg == REG_N)
+		return -EINVAL;
+
+	if (func < 0)
+		return -ERANGE;
+
+	if (func & TEGRA_MUX_RSVD) {
+		mux = func & 0x3;
+	} else {
+		for (i = 0; i < 4; i++) {
+			if (pingroups[pg].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+
+	if (mux < 0)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(TEGRA_PP_MUX_CTL(pingroups[pg].mux_reg));
+	reg &= ~(0x3 << pingroups[pg].mux_bit);
+	reg |= mux << pingroups[pg].mux_bit;
+	pg_writel(reg, TEGRA_PP_MUX_CTL(pingroups[pg].mux_reg));
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+int tegra_pinmux_set_tristate(enum tegra_pingroup pg,
+	enum tegra_tristate tristate)
+{
+	unsigned long reg;
+	unsigned long flags;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].tri_reg == REG_N)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(TEGRA_TRI_STATE(pingroups[pg].tri_reg));
+	reg &= ~(0x1 << pingroups[pg].tri_bit);
+	if (tristate)
+		reg |= 1 << pingroups[pg].tri_bit;
+	pg_writel(reg, TEGRA_TRI_STATE(pingroups[pg].tri_reg));
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+int tegra_pinmux_set_pullupdown(enum tegra_pingroup pg,
+	enum tegra_pullupdown pupd)
+{
+	unsigned long reg;
+	unsigned long flags;
+
+	if (pg < 0 || pg >=  TEGRA_MAX_PINGROUP)
+		return -ERANGE;
+
+	if (pingroups[pg].pupd_reg == REG_N)
+		return -EINVAL;
+
+	if (pupd != TEGRA_PUPD_NORMAL &&
+	    pupd != TEGRA_PUPD_PULL_DOWN &&
+	    pupd != TEGRA_PUPD_PULL_UP)
+		return -EINVAL;
+
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(TEGRA_PP_PU_PD(pingroups[pg].pupd_reg));
+	reg &= ~(0x3 << pingroups[pg].pupd_bit);
+	reg |= pupd << pingroups[pg].pupd_bit;
+	pg_writel(reg, TEGRA_PP_PU_PD(pingroups[pg].pupd_reg));
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+void tegra_pinmux_config_pingroup(enum tegra_pingroup pingroup,
+				 enum tegra_mux_func func,
+				 enum tegra_pullupdown pupd,
+				 enum tegra_tristate tristate)
+{
+	int err;
+
+	if (pingroups[pingroup].mux_reg != REG_N) {
+		err = tegra_pinmux_set_func(pingroup, func);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s func to %s: %d\n",
+			       pingroup_name(pingroup), func_name(func), err);
+	}
+
+	if (pingroups[pingroup].pupd_reg != REG_N) {
+		err = tegra_pinmux_set_pullupdown(pingroup, pupd);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s pullupdown to %s: %d\n",
+			       pingroup_name(pingroup), pupd_name(pupd), err);
+	}
+
+	if (pingroups[pingroup].tri_reg != REG_N) {
+		err = tegra_pinmux_set_tristate(pingroup, tristate);
+		if (err < 0)
+			pr_err("pinmux: can't set pingroup %s tristate to %s: %d\n",
+			       pingroup_name(pingroup), tri_name(func), err);
+	}
+}
+
+
+
+void tegra_pinmux_config_table(struct tegra_pingroup_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		tegra_pinmux_config_pingroup(config[i].pingroup,
+					     config[i].func,
+					     config[i].pupd,
+					     config[i].tristate);
+}
+
+static const char *drive_pinmux_name(enum tegra_drive_pingroup pg)
+{
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return "<UNKNOWN>";
+
+	return drive_pingroups[pg].name;
+}
+
+static const char *enable_name(unsigned long val)
+{
+	return val ? "ENABLE" : "DISABLE";
+}
+
+static const char *drive_name(unsigned long val)
+{
+	if (val >= TEGRA_MAX_DRIVE)
+		return "<UNKNOWN>";
+
+	return tegra_drive_names[val];
+}
+
+static const char *slew_name(unsigned long val)
+{
+	if (val >= TEGRA_MAX_SLEW)
+		return "<UNKNOWN>";
+
+	return tegra_slew_names[val];
+}
+
+static int tegra_drive_pinmux_set_hsm(enum tegra_drive_pingroup pg,
+	enum tegra_hsm hsm)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (hsm != TEGRA_HSM_ENABLE && hsm != TEGRA_HSM_DISABLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	if (hsm == TEGRA_HSM_ENABLE)
+		reg |= (1 << 2);
+	else
+		reg &= ~(1 << 2);
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_schmitt(enum tegra_drive_pingroup pg,
+	enum tegra_schmitt schmitt)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (schmitt != TEGRA_SCHMITT_ENABLE && schmitt != TEGRA_SCHMITT_DISABLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	if (schmitt == TEGRA_SCHMITT_ENABLE)
+		reg |= (1 << 3);
+	else
+		reg &= ~(1 << 3);
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_drive(enum tegra_drive_pingroup pg,
+	enum tegra_drive drive)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (drive < 0 || drive >= TEGRA_MAX_DRIVE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 4);
+	reg |= drive << 4;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_pull_down(enum tegra_drive_pingroup pg,
+	enum tegra_pull_strength pull_down)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (pull_down < 0 || pull_down >= TEGRA_MAX_PULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x1f << 12);
+	reg |= pull_down << 12;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_pull_up(enum tegra_drive_pingroup pg,
+	enum tegra_pull_strength pull_up)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (pull_up < 0 || pull_up >= TEGRA_MAX_PULL)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x1f << 12);
+	reg |= pull_up << 12;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_slew_rising(enum tegra_drive_pingroup pg,
+	enum tegra_slew slew_rising)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (slew_rising < 0 || slew_rising >= TEGRA_MAX_SLEW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 28);
+	reg |= slew_rising << 28;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static int tegra_drive_pinmux_set_slew_falling(enum tegra_drive_pingroup pg,
+	enum tegra_slew slew_falling)
+{
+	unsigned long flags;
+	u32 reg;
+	if (pg < 0 || pg >=  TEGRA_MAX_DRIVE_PINGROUP)
+		return -ERANGE;
+
+	if (slew_falling < 0 || slew_falling >= TEGRA_MAX_SLEW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&mux_lock, flags);
+
+	reg = pg_readl(drive_pingroups[pg].reg);
+	reg &= ~(0x3 << 30);
+	reg |= slew_falling << 30;
+	pg_writel(reg, drive_pingroups[pg].reg);
+
+	spin_unlock_irqrestore(&mux_lock, flags);
+
+	return 0;
+}
+
+static void tegra_drive_pinmux_config_pingroup(enum tegra_drive_pingroup pingroup,
+					  enum tegra_hsm hsm,
+					  enum tegra_schmitt schmitt,
+					  enum tegra_drive drive,
+					  enum tegra_pull_strength pull_down,
+					  enum tegra_pull_strength pull_up,
+					  enum tegra_slew slew_rising,
+					  enum tegra_slew slew_falling)
+{
+	int err;
+
+	err = tegra_drive_pinmux_set_hsm(pingroup, hsm);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s hsm to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			enable_name(hsm), err);
+
+	err = tegra_drive_pinmux_set_schmitt(pingroup, schmitt);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s schmitt to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			enable_name(schmitt), err);
+
+	err = tegra_drive_pinmux_set_drive(pingroup, drive);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s drive to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			drive_name(drive), err);
+
+	err = tegra_drive_pinmux_set_pull_down(pingroup, pull_down);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s pull down to %d: %d\n",
+			drive_pinmux_name(pingroup),
+			pull_down, err);
+
+	err = tegra_drive_pinmux_set_pull_up(pingroup, pull_up);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s pull up to %d: %d\n",
+			drive_pinmux_name(pingroup),
+			pull_up, err);
+
+	err = tegra_drive_pinmux_set_slew_rising(pingroup, slew_rising);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s rising slew to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			slew_name(slew_rising), err);
+
+	err = tegra_drive_pinmux_set_slew_falling(pingroup, slew_falling);
+	if (err < 0)
+		pr_err("pinmux: can't set pingroup %s falling slew to %s: %d\n",
+			drive_pinmux_name(pingroup),
+			slew_name(slew_falling), err);
+}
+
+void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
+	int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		tegra_drive_pinmux_config_pingroup(config[i].pingroup,
+						     config[i].hsm,
+						     config[i].schmitt,
+						     config[i].drive,
+						     config[i].pull_down,
+						     config[i].pull_up,
+						     config[i].slew_rising,
+						     config[i].slew_falling);
+}
+
+
+#ifdef	CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static void dbg_pad_field(struct seq_file *s, int len)
+{
+	seq_putc(s, ',');
+
+	while (len-- > -1)
+		seq_putc(s, ' ');
+}
+
+static int dbg_pinmux_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int len;
+
+	for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+		unsigned long tri;
+		unsigned long mux;
+		unsigned long pupd;
+
+		seq_printf(s, "\t{TEGRA_PINGROUP_%s", pingroups[i].name);
+		len = strlen(pingroups[i].name);
+		dbg_pad_field(s, 5 - len);
+
+		if (pingroups[i].mux_reg == REG_N) {
+			seq_printf(s, "TEGRA_MUX_NONE");
+			len = strlen("NONE");
+		} else {
+			mux = (pg_readl(TEGRA_PP_MUX_CTL(pingroups[i].mux_reg)) >>
+			       pingroups[i].mux_bit) & 0x3;
+			if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
+				seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
+				len = 5;
+			} else {
+				seq_printf(s, "TEGRA_MUX_%s",
+					   tegra_mux_names[pingroups[i].funcs[mux]]);
+				len = strlen(tegra_mux_names[pingroups[i].funcs[mux]]);
+			}
+		}
+		dbg_pad_field(s, 13-len);
+
+		if (pingroups[i].mux_reg == REG_N) {
+			seq_printf(s, "TEGRA_PUPD_NORMAL");
+			len = strlen("NORMAL");
+		} else {
+			pupd = (pg_readl(TEGRA_PP_PU_PD(pingroups[i].pupd_reg)) >>
+				pingroups[i].pupd_bit) & 0x3;
+			seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
+			len = strlen(pupd_name(pupd));
+		}
+		dbg_pad_field(s, 9 - len);
+
+		if (pingroups[i].tri_reg == REG_N) {
+			seq_printf(s, "TEGRA_TRI_NORMAL");
+		} else {
+			tri = (pg_readl(TEGRA_TRI_STATE(pingroups[i].tri_reg)) >>
+			       pingroups[i].tri_bit) & 0x1;
+
+			seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
+		}
+		seq_printf(s, "},\n");
+	}
+	return 0;
+}
+
+static int dbg_pinmux_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_pinmux_show, &inode->i_private);
+}
+
+static const struct file_operations debug_fops = {
+	.open		= dbg_pinmux_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int dbg_drive_pinmux_show(struct seq_file *s, void *unused)
+{
+	int i;
+	int len;
+
+	for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) {
+		u32 reg;
+
+		seq_printf(s, "\t{TEGRA_DRIVE_PINGROUP_%s",
+			drive_pingroups[i].name);
+		len = strlen(drive_pingroups[i].name);
+		dbg_pad_field(s, 7 - len);
+
+
+		reg = pg_readl(drive_pingroups[i].reg);
+		if (HSM_EN(reg)) {
+			seq_printf(s, "TEGRA_HSM_ENABLE");
+			len = 16;
+		} else {
+			seq_printf(s, "TEGRA_HSM_DISABLE");
+			len = 17;
+		}
+		dbg_pad_field(s, 17 - len);
+
+		if (SCHMT_EN(reg)) {
+			seq_printf(s, "TEGRA_SCHMITT_ENABLE");
+			len = 21;
+		} else {
+			seq_printf(s, "TEGRA_SCHMITT_DISABLE");
+			len = 22;
+		}
+		dbg_pad_field(s, 22 - len);
+
+		seq_printf(s, "TEGRA_DRIVE_%s", drive_name(LPMD(reg)));
+		len = strlen(drive_name(LPMD(reg)));
+		dbg_pad_field(s, 5 - len);
+
+		seq_printf(s, "TEGRA_PULL_%d", DRVDN(reg));
+		len = DRVDN(reg) < 10 ? 1 : 2;
+		dbg_pad_field(s, 2 - len);
+
+		seq_printf(s, "TEGRA_PULL_%d", DRVUP(reg));
+		len = DRVUP(reg) < 10 ? 1 : 2;
+		dbg_pad_field(s, 2 - len);
+
+		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWR(reg)));
+		len = strlen(slew_name(SLWR(reg)));
+		dbg_pad_field(s, 7 - len);
+
+		seq_printf(s, "TEGRA_SLEW_%s", slew_name(SLWF(reg)));
+
+		seq_printf(s, "},\n");
+	}
+	return 0;
+}
+
+static int dbg_drive_pinmux_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dbg_drive_pinmux_show, &inode->i_private);
+}
+
+static const struct file_operations debug_drive_fops = {
+	.open		= dbg_drive_pinmux_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init tegra_pinmux_debuginit(void)
+{
+	(void) debugfs_create_file("tegra_pinmux", S_IRUGO,
+					NULL, NULL, &debug_fops);
+	(void) debugfs_create_file("tegra_pinmux_drive", S_IRUGO,
+					NULL, NULL, &debug_drive_fops);
+	return 0;
+}
+late_initcall(tegra_pinmux_debuginit);
+#endif
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
new file mode 100644
index 00000000000..1c0fd92cab3
--- /dev/null
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -0,0 +1,156 @@
+/*
+ *  linux/arch/arm/mach-tegra/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ *  Copyright (C) 2009 Palm
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+
+#include <mach/iomap.h>
+
+extern void tegra_secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
+
+#define EVP_CPU_RESET_VECTOR \
+	(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
+#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
+	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
+#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
+	(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100);
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long old_boot_vector;
+	unsigned long boot_vector;
+	unsigned long timeout;
+	u32 reg;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+
+	/* set the reset vector to point to the secondary_startup routine */
+
+	boot_vector = virt_to_phys(tegra_secondary_startup);
+	old_boot_vector = readl(EVP_CPU_RESET_VECTOR);
+	writel(boot_vector, EVP_CPU_RESET_VECTOR);
+
+	/* enable cpu clock on cpu1 */
+	reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+	writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+
+	reg = (1<<13) | (1<<9) | (1<<5) | (1<<1);
+	writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+
+	smp_wmb();
+	flush_cache_all();
+
+	/* unhalt the cpu */
+	writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14);
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (readl(EVP_CPU_RESET_VECTOR) != boot_vector)
+			break;
+		udelay(10);
+	}
+
+	/* put the old boot vector back */
+	writel(old_boot_vector, EVP_CPU_RESET_VECTOR);
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = scu_get_core_count(scu_base);
+
+	for (i = 0; i < ncores; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = scu_get_core_count(scu_base);
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start. Note that, on modern versions of
+	 * MILO, the "poke" doesn't actually do anything until each
+	 * individual core is sent a soft interrupt to get it out of
+	 * WFI
+	 */
+	if (max_cpus > 1) {
+		percpu_timer_setup();
+		scu_enable(scu_base);
+	}
+}
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
new file mode 100644
index 00000000000..426163231ff
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -0,0 +1,1359 @@
+/*
+ * arch/arm/mach-tegra/tegra2_clocks.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/hrtimer.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+
+#define RST_DEVICES			0x004
+#define RST_DEVICES_SET			0x300
+#define RST_DEVICES_CLR			0x304
+
+#define CLK_OUT_ENB			0x010
+#define CLK_OUT_ENB_SET			0x320
+#define CLK_OUT_ENB_CLR			0x324
+
+#define OSC_CTRL			0x50
+#define OSC_CTRL_OSC_FREQ_MASK		(3<<30)
+#define OSC_CTRL_OSC_FREQ_13MHZ		(0<<30)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ	(1<<30)
+#define OSC_CTRL_OSC_FREQ_12MHZ		(2<<30)
+#define OSC_CTRL_OSC_FREQ_26MHZ		(3<<30)
+
+#define OSC_FREQ_DET			0x58
+#define OSC_FREQ_DET_TRIG		(1<<31)
+
+#define OSC_FREQ_DET_STATUS		0x5C
+#define OSC_FREQ_DET_BUSY		(1<<31)
+#define OSC_FREQ_DET_CNT_MASK		0xFFFF
+
+#define PERIPH_CLK_SOURCE_MASK		(3<<30)
+#define PERIPH_CLK_SOURCE_SHIFT		30
+#define PERIPH_CLK_SOURCE_ENABLE	(1<<28)
+#define PERIPH_CLK_SOURCE_DIV_MASK	0xFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT	0
+
+#define PLL_BASE			0x0
+#define PLL_BASE_BYPASS			(1<<31)
+#define PLL_BASE_ENABLE			(1<<30)
+#define PLL_BASE_REF_ENABLE		(1<<29)
+#define PLL_BASE_OVERRIDE		(1<<28)
+#define PLL_BASE_LOCK			(1<<27)
+#define PLL_BASE_DIVP_MASK		(0x7<<20)
+#define PLL_BASE_DIVP_SHIFT		20
+#define PLL_BASE_DIVN_MASK		(0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT		8
+#define PLL_BASE_DIVM_MASK		(0x1F)
+#define PLL_BASE_DIVM_SHIFT		0
+
+#define PLL_OUT_RATIO_MASK		(0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT		8
+#define PLL_OUT_OVERRIDE		(1<<2)
+#define PLL_OUT_CLKEN			(1<<1)
+#define PLL_OUT_RESET_DISABLE		(1<<0)
+
+#define PLL_MISC(c)			(((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+#define PLL_MISC_DCCON_SHIFT		20
+#define PLL_MISC_LOCK_ENABLE		(1<<18)
+#define PLL_MISC_CPCON_SHIFT		8
+#define PLL_MISC_CPCON_MASK		(0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT		4
+#define PLL_MISC_LFCON_MASK		(0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT		0
+#define PLL_MISC_VCOCON_MASK		(0xF<<PLL_MISC_VCOCON_SHIFT)
+
+#define PLLD_MISC_CLKENABLE		(1<<30)
+#define PLLD_MISC_DIV_RST		(1<<23)
+#define PLLD_MISC_DCCON_SHIFT		12
+
+#define PERIPH_CLK_TO_ENB_REG(c)	((c->clk_num / 32) * 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c)	((c->clk_num / 32) * 8)
+#define PERIPH_CLK_TO_ENB_BIT(c)	(1 << (c->clk_num % 32))
+
+#define SUPER_CLK_MUX			0x00
+#define SUPER_STATE_SHIFT		28
+#define SUPER_STATE_MASK		(0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY		(0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE		(0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN			(0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ			(0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ			(0x4 << SUPER_STATE_SHIFT)
+#define SUPER_SOURCE_MASK		0xF
+#define	SUPER_FIQ_SOURCE_SHIFT		12
+#define	SUPER_IRQ_SOURCE_SHIFT		8
+#define	SUPER_RUN_SOURCE_SHIFT		4
+#define	SUPER_IDLE_SOURCE_SHIFT		0
+
+#define SUPER_CLK_DIVIDER		0x04
+
+#define BUS_CLK_DISABLE			(1<<3)
+#define BUS_CLK_DIV_MASK		0x3
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+
+#define clk_writel(value, reg) \
+	__raw_writel(value, (u32)reg_clk_base + (reg))
+#define clk_readl(reg) \
+	__raw_readl((u32)reg_clk_base + (reg))
+
+unsigned long clk_measure_input_freq(void)
+{
+	u32 clock_autodetect;
+	clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+	do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+	clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+	if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+		return 12000000;
+	} else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+		return 13000000;
+	} else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+		return 19200000;
+	} else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+		return 26000000;
+	} else {
+		pr_err("%s: Unexpected clock autodetect value %d", __func__, clock_autodetect);
+		BUG();
+		return 0;
+	}
+}
+
+static int clk_div71_get_divider(struct clk *c, unsigned long rate)
+{
+	unsigned long divider_u71;
+
+	divider_u71 = DIV_ROUND_UP(c->rate * 2, rate);
+
+	if (divider_u71 - 2 > 255 || divider_u71 - 2 < 0)
+		return -EINVAL;
+
+	return divider_u71 - 2;
+}
+
+static unsigned long tegra2_clk_recalculate_rate(struct clk *c)
+{
+	unsigned long rate;
+	rate = c->parent->rate;
+
+	if (c->mul != 0 && c->div != 0)
+		c->rate = rate * c->mul / c->div;
+	else
+		c->rate = rate;
+	return c->rate;
+}
+
+
+/* clk_m functions */
+static unsigned long tegra2_clk_m_autodetect_rate(struct clk *c)
+{
+	u32 auto_clock_control = clk_readl(OSC_CTRL) & ~OSC_CTRL_OSC_FREQ_MASK;
+
+	c->rate = clk_measure_input_freq();
+	switch (c->rate) {
+	case 12000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+		break;
+	case 13000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+		break;
+	case 19200000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+		break;
+	case 26000000:
+		auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+		break;
+	default:
+		pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+		BUG();
+	}
+	clk_writel(auto_clock_control, OSC_CTRL);
+	return c->rate;
+}
+
+static void tegra2_clk_m_init(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	tegra2_clk_m_autodetect_rate(c);
+}
+
+static int tegra2_clk_m_enable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	return 0;
+}
+
+static void tegra2_clk_m_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	BUG();
+}
+
+static struct clk_ops tegra_clk_m_ops = {
+	.init		= tegra2_clk_m_init,
+	.enable		= tegra2_clk_m_enable,
+	.disable	= tegra2_clk_m_disable,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra have two-stage muxes and a clock skipping
+ * super divider.  We will ignore the clock skipping divider, since we
+ * can't lower the voltage when using the clock skip, but we can if we
+ * lower the PLL frequency.
+ */
+static void tegra2_super_clk_init(struct clk *c)
+{
+	u32 val;
+	int source;
+	int shift;
+	const struct clk_mux_sel *sel;
+	val = clk_readl(c->reg + SUPER_CLK_MUX);
+	c->state = ON;
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	source = (val >> shift) & SUPER_SOURCE_MASK;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->value == source)
+			break;
+	}
+	BUG_ON(sel->input == NULL);
+	c->parent = sel->input;
+	tegra2_clk_recalculate_rate(c);
+}
+
+static int tegra2_super_clk_enable(struct clk *c)
+{
+	clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+	return 0;
+}
+
+static void tegra2_super_clk_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	/* oops - don't disable the CPU clock! */
+	BUG();
+}
+
+static int tegra2_super_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	int shift;
+	val = clk_readl(c->reg + SUPER_CLK_MUX);;
+	BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+		((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+	shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+		SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			clk_reparent(c, p);
+			val &= ~(SUPER_SOURCE_MASK << shift);
+			val |= sel->value << shift;
+			clk_writel(val, c->reg);
+			c->rate = c->parent->rate;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_super_ops = {
+	.init			= tegra2_super_clk_init,
+	.enable			= tegra2_super_clk_enable,
+	.disable		= tegra2_super_clk_disable,
+	.set_parent		= tegra2_super_clk_set_parent,
+	.recalculate_rate	= tegra2_clk_recalculate_rate,
+};
+
+/* bus clock functions */
+static void tegra2_bus_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON;
+	c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1;
+	c->mul = 1;
+	tegra2_clk_recalculate_rate(c);
+}
+
+static int tegra2_bus_clk_enable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val &= ~(BUS_CLK_DISABLE << c->reg_shift);
+	clk_writel(val, c->reg);
+	return 0;
+}
+
+static void tegra2_bus_clk_disable(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	val |= BUS_CLK_DISABLE << c->reg_shift;
+	clk_writel(val, c->reg);
+}
+
+static int tegra2_bus_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val = clk_readl(c->reg);
+	unsigned long parent_rate = c->parent->rate;
+	int i;
+	for (i = 1; i <= 4; i++) {
+		if (rate == parent_rate / i) {
+			val &= ~(BUS_CLK_DIV_MASK << c->reg_shift);
+			val |= (i - 1) << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = i;
+			c->mul = 1;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_bus_ops = {
+	.init			= tegra2_bus_clk_init,
+	.enable			= tegra2_bus_clk_enable,
+	.disable		= tegra2_bus_clk_disable,
+	.set_rate		= tegra2_bus_clk_set_rate,
+	.recalculate_rate	= tegra2_clk_recalculate_rate,
+};
+
+/* PLL Functions */
+static unsigned long tegra2_pll_clk_recalculate_rate(struct clk *c)
+{
+	u64 rate;
+	rate = c->parent->rate;
+	rate *= c->n;
+	do_div(rate, c->m);
+	if (c->p == 2)
+		rate >>= 1;
+	c->rate = rate;
+	return c->rate;
+}
+
+static int tegra2_pll_clk_wait_for_lock(struct clk *c)
+{
+	ktime_t before;
+
+	before = ktime_get();
+	while (!(clk_readl(c->reg + PLL_BASE) & PLL_BASE_LOCK)) {
+		if (ktime_us_delta(ktime_get(), before) > 5000) {
+			pr_err("Timed out waiting for lock bit on pll %s",
+				c->name);
+			return -1;
+		}
+	}
+
+	return 0;
+}
+
+static void tegra2_pll_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg + PLL_BASE);
+
+	c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+
+	if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+		pr_warning("Clock %s has unknown fixed frequency\n", c->name);
+		c->n = 1;
+		c->m = 0;
+		c->p = 1;
+	} else if (val & PLL_BASE_BYPASS) {
+		c->n = 1;
+		c->m = 1;
+		c->p = 1;
+	} else {
+		c->n = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+		c->m = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+		c->p = (val & PLL_BASE_DIVP_MASK) ? 2 : 1;
+	}
+
+	val = clk_readl(c->reg + PLL_MISC(c));
+	if (c->flags & PLL_HAS_CPCON)
+		c->cpcon = (val & PLL_MISC_CPCON_MASK) >> PLL_MISC_CPCON_SHIFT;
+
+	tegra2_pll_clk_recalculate_rate(c);
+}
+
+static int tegra2_pll_clk_enable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg + PLL_BASE);
+	val &= ~PLL_BASE_BYPASS;
+	val |= PLL_BASE_ENABLE;
+	clk_writel(val, c->reg + PLL_BASE);
+
+	val = clk_readl(c->reg + PLL_MISC(c));
+	val |= PLL_MISC_LOCK_ENABLE;
+	clk_writel(val, c->reg + PLL_MISC(c));
+
+	tegra2_pll_clk_wait_for_lock(c);
+
+	return 0;
+}
+
+static void tegra2_pll_clk_disable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	val = clk_readl(c->reg);
+	val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+	clk_writel(val, c->reg);
+}
+
+static int tegra2_pll_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	unsigned long input_rate;
+	const struct clk_pll_table *sel;
+
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+	BUG_ON(c->refcnt != 0);
+
+	input_rate = c->parent->rate;
+	for (sel = c->pll_table; sel->input_rate != 0; sel++) {
+		if (sel->input_rate == input_rate && sel->output_rate == rate) {
+			c->n = sel->n;
+			c->m = sel->m;
+			c->p = sel->p;
+			c->cpcon = sel->cpcon;
+
+			val = clk_readl(c->reg + PLL_BASE);
+			if (c->flags & PLL_FIXED)
+				val |= PLL_BASE_OVERRIDE;
+			val &= ~(PLL_BASE_DIVP_MASK | PLL_BASE_DIVN_MASK |
+				 PLL_BASE_DIVM_MASK);
+			val |= (c->m << PLL_BASE_DIVM_SHIFT) |
+				(c->n << PLL_BASE_DIVN_SHIFT);
+			BUG_ON(c->p > 2);
+			if (c->p == 2)
+				val |= 1 << PLL_BASE_DIVP_SHIFT;
+			clk_writel(val, c->reg + PLL_BASE);
+
+			if (c->flags & PLL_HAS_CPCON) {
+				val = c->cpcon << PLL_MISC_CPCON_SHIFT;
+				val |= PLL_MISC_LOCK_ENABLE;
+				clk_writel(val, c->reg + PLL_MISC(c));
+			}
+
+			if (c->state == ON)
+				tegra2_pll_clk_enable(c);
+
+			c->rate = rate;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_pll_ops = {
+	.init			= tegra2_pll_clk_init,
+	.enable			= tegra2_pll_clk_enable,
+	.disable		= tegra2_pll_clk_disable,
+	.set_rate		= tegra2_pll_clk_set_rate,
+	.recalculate_rate	= tegra2_pll_clk_recalculate_rate,
+};
+
+/* Clock divider ops */
+static void tegra2_pll_div_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	u32 divu71;
+	val >>= c->reg_shift;
+	c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+	if (!(val & PLL_OUT_RESET_DISABLE))
+		c->state = OFF;
+
+	if (c->flags & DIV_U71) {
+		divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+		c->div = (divu71 + 2);
+		c->mul = 2;
+	} else if (c->flags & DIV_2) {
+		c->div = 2;
+		c->mul = 1;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	tegra2_clk_recalculate_rate(c);
+}
+
+static int tegra2_pll_div_clk_enable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+		return 0;
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		val = clk_readl(c->reg);
+		val &= ~PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void tegra2_pll_div_clk_disable(struct clk *c)
+{
+	u32 val;
+	u32 new_val;
+
+	pr_debug("%s: %s\n", __func__, c->name);
+	if (c->flags & DIV_U71) {
+		val = clk_readl(c->reg);
+		new_val = val >> c->reg_shift;
+		new_val &= 0xFFFF;
+
+		new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+		val &= ~(0xFFFF << c->reg_shift);
+		val |= new_val << c->reg_shift;
+		clk_writel(val, c->reg);
+	} else if (c->flags & DIV_2) {
+		BUG_ON(!(c->flags & PLLD));
+		val = clk_readl(c->reg);
+		val |= PLLD_MISC_DIV_RST;
+		clk_writel(val, c->reg);
+	}
+}
+
+static int tegra2_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	u32 new_val;
+	int divider_u71;
+	pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+	if (c->flags & DIV_U71) {
+		divider_u71 = clk_div71_get_divider(c->parent, rate);
+		if (divider_u71 >= 0) {
+			val = clk_readl(c->reg);
+			new_val = val >> c->reg_shift;
+			new_val &= 0xFFFF;
+			if (c->flags & DIV_U71_FIXED)
+				new_val |= PLL_OUT_OVERRIDE;
+			new_val &= ~PLL_OUT_RATIO_MASK;
+			new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+			val &= ~(0xFFFF << c->reg_shift);
+			val |= new_val << c->reg_shift;
+			clk_writel(val, c->reg);
+			c->div = divider_u71 + 2;
+			c->mul = 2;
+			tegra2_clk_recalculate_rate(c);
+			return 0;
+		}
+	} else if (c->flags & DIV_2) {
+		if (c->parent->rate == rate * 2) {
+			c->rate = rate;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+
+static struct clk_ops tegra_pll_div_ops = {
+	.init			= tegra2_pll_div_clk_init,
+	.enable			= tegra2_pll_div_clk_enable,
+	.disable		= tegra2_pll_div_clk_disable,
+	.set_rate		= tegra2_pll_div_clk_set_rate,
+	.recalculate_rate	= tegra2_clk_recalculate_rate,
+};
+
+/* Periph clk ops */
+
+static void tegra2_periph_clk_init(struct clk *c)
+{
+	u32 val = clk_readl(c->reg);
+	const struct clk_mux_sel *mux = 0;
+	const struct clk_mux_sel *sel;
+	if (c->flags & MUX) {
+		for (sel = c->inputs; sel->input != NULL; sel++) {
+			if (val >> PERIPH_CLK_SOURCE_SHIFT == sel->value)
+				mux = sel;
+		}
+		BUG_ON(!mux);
+
+		c->parent = mux->input;
+	} else {
+		c->parent = c->inputs[0].input;
+	}
+
+	if (c->flags & DIV_U71) {
+		u32 divu71 = val & PERIPH_CLK_SOURCE_DIV_MASK;
+		c->div = divu71 + 2;
+		c->mul = 2;
+	} else {
+		c->div = 1;
+		c->mul = 1;
+	}
+
+	c->state = ON;
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+	if (!(c->flags & PERIPH_NO_RESET))
+		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
+				PERIPH_CLK_TO_ENB_BIT(c))
+			c->state = OFF;
+	tegra2_clk_recalculate_rate(c);
+}
+
+static int tegra2_periph_clk_enable(struct clk *c)
+{
+	u32 val;
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+	if (c->flags & PERIPH_EMC_ENB) {
+		/* The EMC peripheral clock has 2 extra enable bits */
+		/* FIXME: Do they need to be disabled? */
+		val = clk_readl(c->reg);
+		val |= 0x3 << 24;
+		clk_writel(val, c->reg);
+	}
+	return 0;
+}
+
+static void tegra2_periph_clk_disable(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+
+	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+void tegra2_periph_reset_deassert(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	if (!(c->flags & PERIPH_NO_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+void tegra2_periph_reset_assert(struct clk *c)
+{
+	pr_debug("%s on clock %s\n", __func__, c->name);
+	if (!(c->flags & PERIPH_NO_RESET))
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			RST_DEVICES_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
+}
+
+
+static int tegra2_periph_clk_set_parent(struct clk *c, struct clk *p)
+{
+	u32 val;
+	const struct clk_mux_sel *sel;
+	pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+	for (sel = c->inputs; sel->input != NULL; sel++) {
+		if (sel->input == p) {
+			clk_reparent(c, p);
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_MASK;
+			val |= (sel->value) << PERIPH_CLK_SOURCE_SHIFT;
+			clk_writel(val, c->reg);
+			c->rate = c->parent->rate;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tegra2_periph_clk_set_rate(struct clk *c, unsigned long rate)
+{
+	u32 val;
+	int divider_u71;
+	pr_debug("%s: %lu\n", __func__, rate);
+	if (c->flags & DIV_U71) {
+		divider_u71 = clk_div71_get_divider(c->parent, rate);
+		if (divider_u71 >= 0) {
+			val = clk_readl(c->reg);
+			val &= ~PERIPH_CLK_SOURCE_DIV_MASK;
+			val |= divider_u71;
+			clk_writel(val, c->reg);
+			c->div = divider_u71 + 2;
+			c->mul = 2;
+			tegra2_clk_recalculate_rate(c);
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static struct clk_ops tegra_periph_clk_ops = {
+	.init			= &tegra2_periph_clk_init,
+	.enable			= &tegra2_periph_clk_enable,
+	.disable		= &tegra2_periph_clk_disable,
+	.set_parent		= &tegra2_periph_clk_set_parent,
+	.set_rate		= &tegra2_periph_clk_set_rate,
+	.recalculate_rate	= &tegra2_clk_recalculate_rate,
+};
+
+/* Clock doubler ops */
+static void tegra2_clk_double_init(struct clk *c)
+{
+	c->mul = 2;
+	c->div = 1;
+	c->state = ON;
+	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
+			PERIPH_CLK_TO_ENB_BIT(c)))
+		c->state = OFF;
+	tegra2_clk_recalculate_rate(c);
+};
+
+static struct clk_ops tegra_clk_double_ops = {
+	.init			= &tegra2_clk_double_init,
+	.enable			= &tegra2_periph_clk_enable,
+	.disable		= &tegra2_periph_clk_disable,
+	.recalculate_rate	= &tegra2_clk_recalculate_rate,
+};
+
+/* Clock definitions */
+static struct clk tegra_clk_32k = {
+	.name = "clk_32k",
+	.rate = 32678,
+	.ops  = NULL,
+};
+
+static struct clk_pll_table tegra_pll_s_table[] = {
+	{32768, 12000000, 366, 1, 1, 0},
+	{32768, 13000000, 397, 1, 1, 0},
+	{32768, 19200000, 586, 1, 1, 0},
+	{32768, 26000000, 793, 1, 1, 0},
+	{0, 0, 0, 0, 0, 0},
+};
+
+static struct clk tegra_pll_s = {
+	.name      = "pll_s",
+	.flags     = PLL_ALT_MISC_REG,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xf0,
+	.input_min = 32768,
+	.input_max = 32768,
+	.parent    = &tegra_clk_32k,
+	.cf_min    = 0, /* FIXME */
+	.cf_max    = 0, /* FIXME */
+	.vco_min   = 12000000,
+	.vco_max   = 26000000,
+	.pll_table = tegra_pll_s_table,
+};
+
+static struct clk_mux_sel tegra_clk_m_sel[] = {
+	{ .input = &tegra_clk_32k, .value = 0},
+	{ .input = &tegra_pll_s,  .value = 1},
+	{ 0, 0},
+};
+static struct clk tegra_clk_m = {
+	.name      = "clk_m",
+	.flags     = ENABLE_ON_INIT,
+	.ops       = &tegra_clk_m_ops,
+	.inputs    = tegra_clk_m_sel,
+	.reg       = 0x1fc,
+	.reg_mask  = (1<<28),
+	.reg_shift = 28,
+};
+
+static struct clk_pll_table tegra_pll_c_table[] = {
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_c = {
+	.name      = "pll_c",
+	.flags	   = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x80,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_c_table,
+};
+
+static struct clk tegra_pll_c_out1 = {
+	.name      = "pll_c_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_c,
+	.reg       = 0x84,
+	.reg_shift = 0,
+};
+
+static struct clk_pll_table tegra_pll_m_table[] = {
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_m = {
+	.name      = "pll_m",
+	.flags     = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0x90,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1200000000,
+	.pll_table = tegra_pll_m_table,
+};
+
+static struct clk tegra_pll_m_out1 = {
+	.name      = "pll_m_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_m,
+	.reg       = 0x94,
+	.reg_shift = 0,
+};
+
+static struct clk_pll_table tegra_pll_p_table[] = {
+	{ 12000000, 216000000, 432, 12, 2, 8},
+	{ 13000000, 216000000, 432, 13, 2, 8},
+	{ 19200000, 216000000, 90,   4, 2, 1},
+	{ 26000000, 216000000, 432, 26, 2, 8},
+	{ 12000000, 432000000, 432, 12, 1, 8},
+	{ 13000000, 432000000, 432, 13, 1, 8},
+	{ 19200000, 432000000, 90,   4, 1, 1},
+	{ 26000000, 432000000, 432, 26, 1, 8},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_p = {
+	.name      = "pll_p",
+	.flags     = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xa0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_p_table,
+};
+
+static struct clk tegra_pll_p_out1 = {
+	.name      = "pll_p_out1",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 0,
+};
+
+static struct clk tegra_pll_p_out2 = {
+	.name      = "pll_p_out2",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa4,
+	.reg_shift = 16,
+};
+
+static struct clk tegra_pll_p_out3 = {
+	.name      = "pll_p_out3",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 0,
+};
+
+static struct clk tegra_pll_p_out4 = {
+	.name      = "pll_p_out4",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+	.parent    = &tegra_pll_p,
+	.reg       = 0xa8,
+	.reg_shift = 16,
+};
+
+static struct clk_pll_table tegra_pll_a_table[] = {
+	{ 28800000, 56448000, 49, 25, 1, 1},
+	{ 28800000, 73728000, 64, 25, 1, 1},
+	{ 28800000, 11289600, 49, 25, 1, 1},
+	{ 28800000, 12288000, 64, 25, 1, 1},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_a = {
+	.name      = "pll_a",
+	.flags     = PLL_HAS_CPCON,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xb0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_pll_p_out1,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1400000000,
+	.pll_table = tegra_pll_a_table,
+};
+
+static struct clk tegra_pll_a_out0 = {
+	.name      = "pll_a_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_U71,
+	.parent    = &tegra_pll_a,
+	.reg       = 0xb4,
+	.reg_shift = 0,
+};
+
+static struct clk_pll_table tegra_pll_d_table[] = {
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_d = {
+	.name      = "pll_d",
+	.flags     = PLL_HAS_CPCON | PLLD,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xd0,
+	.input_min = 2000000,
+	.input_max = 40000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 40000000,
+	.vco_max   = 1000000000,
+	.pll_table = tegra_pll_d_table,
+};
+
+static struct clk tegra_pll_d_out0 = {
+	.name      = "pll_d_out0",
+	.ops       = &tegra_pll_div_ops,
+	.flags     = DIV_2 | PLLD,
+	.parent    = &tegra_pll_d,
+};
+
+static struct clk_pll_table tegra_pll_u_table[] = {
+	{ 12000000, 480000000, 960, 12, 1, 0},
+	{ 13000000, 480000000, 960, 13, 1, 0},
+	{ 19200000, 480000000, 200, 4,  1, 0},
+	{ 26000000, 480000000, 960, 26, 1, 0},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_u = {
+	.name      = "pll_u",
+	.flags     = 0,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xc0,
+	.input_min = 2000000,
+	.input_max = 40000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 480000000,
+	.vco_max   = 960000000,
+	.pll_table = tegra_pll_u_table,
+};
+
+static struct clk_pll_table tegra_pll_x_table[] = {
+	{ 12000000, 1000000000, 1000, 12, 1, 12},
+	{ 13000000, 1000000000, 1000, 13, 1, 12},
+	{ 19200000, 1000000000, 625,  12, 1, 8},
+	{ 26000000, 1000000000, 1000, 26, 1, 12},
+	{ 12000000, 750000000,  750,  12, 1, 12},
+	{ 13000000, 750000000,  750,  13, 1, 12},
+	{ 19200000, 750000000,  625,  16, 1, 8},
+	{ 26000000, 750000000,  750,  26, 1, 12},
+	{ 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_x = {
+	.name      = "pll_x",
+	.flags     = PLL_HAS_CPCON | PLL_ALT_MISC_REG,
+	.ops       = &tegra_pll_ops,
+	.reg       = 0xe0,
+	.input_min = 2000000,
+	.input_max = 31000000,
+	.parent    = &tegra_clk_m,
+	.cf_min    = 1000000,
+	.cf_max    = 6000000,
+	.vco_min   = 20000000,
+	.vco_max   = 1200000000,
+	.pll_table = tegra_pll_x_table,
+};
+
+static struct clk tegra_clk_d = {
+	.name      = "clk_d",
+	.flags     = PERIPH_NO_RESET,
+	.ops       = &tegra_clk_double_ops,
+	.clk_num   = 90,
+	.reg       = 0x34,
+	.reg_shift = 12,
+	.parent    = &tegra_clk_m,
+};
+
+/* FIXME: need tegra_audio
+static struct clk tegra_clk_audio_2x = {
+	.name      = "clk_d",
+	.flags     = PERIPH_NO_RESET,
+	.ops       = &tegra_clk_double_ops,
+	.clk_num   = 89,
+	.reg       = 0x34,
+	.reg_shift = 8,
+	.parent    = &tegra_audio,
+}
+*/
+
+static struct clk_mux_sel mux_cclk[] = {
+	{ .input = &tegra_clk_m,	.value = 0},
+	{ .input = &tegra_pll_c,	.value = 1},
+	{ .input = &tegra_clk_32k,	.value = 2},
+	{ .input = &tegra_pll_m,	.value = 3},
+	{ .input = &tegra_pll_p,	.value = 4},
+	{ .input = &tegra_pll_p_out4,	.value = 5},
+	{ .input = &tegra_pll_p_out3,	.value = 6},
+	{ .input = &tegra_clk_d,	.value = 7},
+	{ .input = &tegra_pll_x,	.value = 8},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_sclk[] = {
+	{ .input = &tegra_clk_m,	.value = 0},
+	{ .input = &tegra_pll_c_out1,	.value = 1},
+	{ .input = &tegra_pll_p_out4,	.value = 2},
+	{ .input = &tegra_pll_p_out3,	.value = 3},
+	{ .input = &tegra_pll_p_out2,	.value = 4},
+	{ .input = &tegra_clk_d,	.value = 5},
+	{ .input = &tegra_clk_32k,	.value = 6},
+	{ .input = &tegra_pll_m_out1,	.value = 7},
+	{ 0, 0},
+};
+
+static struct clk tegra_clk_cpu = {
+	.name	= "cpu",
+	.inputs	= mux_cclk,
+	.reg	= 0x20,
+	.ops	= &tegra_super_ops,
+};
+
+static struct clk tegra_clk_sys = {
+	.name	= "sys",
+	.inputs	= mux_sclk,
+	.reg	= 0x28,
+	.ops	= &tegra_super_ops,
+};
+
+static struct clk tegra_clk_hclk = {
+	.name		= "hclk",
+	.flags		= DIV_BUS,
+	.parent		= &tegra_clk_sys,
+	.reg		= 0x30,
+	.reg_shift	= 4,
+	.ops		= &tegra_bus_ops,
+};
+
+static struct clk tegra_clk_pclk = {
+	.name		= "pclk",
+	.flags		= DIV_BUS,
+	.parent		= &tegra_clk_hclk,
+	.reg		= 0x30,
+	.reg_shift	= 0,
+	.ops		= &tegra_bus_ops,
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
+	{ .input = &tegra_pll_m, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_pll_a_out0, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
+	{ .input = &tegra_pll_m, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_p, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
+	{ .input = &tegra_pll_p, .value = 0},
+	{ .input = &tegra_pll_c, .value = 1},
+	{ .input = &tegra_pll_m, .value = 2},
+	{ .input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plla_audio_pllp_clkm[] = {
+	{.input = &tegra_pll_a, .value = 0},
+	/* FIXME: no mux defined for tegra_audio
+	{.input = &tegra_audio, .value = 1},*/
+	{.input = &tegra_pll_p, .value = 2},
+	{.input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
+	{.input = &tegra_pll_p, .value = 0},
+	{.input = &tegra_pll_d_out0, .value = 1},
+	{.input = &tegra_pll_c, .value = 2},
+	{.input = &tegra_clk_m, .value = 3},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	/* FIXME: no mux defined for tegra_audio
+	{.input = &tegra_audio,     .value = 2},*/
+	{.input = &tegra_clk_m,     .value = 3},
+	{.input = &tegra_clk_32k,   .value = 4},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
+	{.input = &tegra_pll_p,     .value = 0},
+	{.input = &tegra_pll_c,     .value = 1},
+	{.input = &tegra_pll_m,     .value = 2},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_m[] = {
+	{ .input = &tegra_clk_m, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_out3[] = {
+	{ .input = &tegra_pll_p_out3, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_plld[] = {
+	{ .input = &tegra_pll_d, .value = 0},
+	{ 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_32k[] = {
+	{ .input = &tegra_clk_32k, .value = 0},
+	{ 0, 0},
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _inputs, _flags) \
+	{						\
+		.name      = _name,			\
+		.lookup    = {				\
+			.dev_id    = _dev,		\
+			.con_id	   = _con,		\
+		},					\
+		.ops       = &tegra_periph_clk_ops,	\
+		.clk_num   = _clk_num,			\
+		.reg       = _reg,			\
+		.inputs    = _inputs,			\
+		.flags     = _flags,			\
+	}
+
+struct clk tegra_periph_clks[] = {
+	PERIPH_CLK("rtc",	"rtc-tegra",		NULL,	4,	0,	mux_clk_32k,			PERIPH_NO_RESET),
+	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	mux_clk_m,			0),
+	PERIPH_CLK("i2s1",	"i2s.0",		NULL,	11,	0x100,	mux_plla_audio_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2s2",	"i2s.1",		NULL,	18,	0x104,	mux_plla_audio_pllp_clkm,	MUX | DIV_U71),
+	/* FIXME: spdif has 2 clocks but 1 enable */
+	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	mux_plla_audio_pllp_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	mux_pllp_pllc_pllm,		MUX | DIV_U71),
+	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
+	PERIPH_CLK("spi",	"spi",			NULL,	43,	0x114,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("xio",	"xio",			NULL,	45,	0x120,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("twc",	"twc",			NULL,	16,	0x12c,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc1",	"spi_tegra.0",		NULL,	41,	0x134,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc2",	"spi_tegra.1",		NULL,	44,	0x118,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc3",	"spi_tegra.2",		NULL,	46,	0x11c,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	/* FIXME: vfir shares an enable with uartb */
+	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sdmmc3",	"sdhci-tegra.2",	NULL,	69,	0x1bc,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("sdmmc4",	"sdhci-tegra.3",	NULL,	15,	0x160,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("vde",	"vde",			NULL,	61,	0x1c8,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("csite",	"csite",		NULL,	73,	0x1d4,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	/* FIXME: what is la? */
+	PERIPH_CLK("la",	"la",			NULL,	76,	0x1f8,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("owr",	"owr",			NULL,	71,	0x1cc,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("nor",	"nor",			NULL,	42,	0x1d0,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("mipi",	"mipi",			NULL,	50,	0x174,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2c1",	"tegra-i2c.0",		NULL,	12,	0x124,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2c2",	"tegra-i2c.1",		NULL,	54,	0x198,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2c3",	"tegra-i2c.2",		NULL,	67,	0x1b8,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("dvc",	"tegra-i2c.3",		NULL,	47,	0x128,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("i2c1_i2c",	"tegra-i2c.0",		"i2c",	0,	0,	mux_pllp_out3,			0),
+	PERIPH_CLK("i2c2_i2c",	"tegra-i2c.1",		"i2c",	0,	0,	mux_pllp_out3,			0),
+	PERIPH_CLK("i2c3_i2c",	"tegra-i2c.2",		"i2c",	0,	0,	mux_pllp_out3,			0),
+	PERIPH_CLK("dvc_i2c",	"tegra-i2c.3",		"i2c",	0,	0,	mux_pllp_out3,			0),
+	PERIPH_CLK("uarta",	"uart.0",		NULL,	6,	0x178,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("uartb",	"uart.1",		NULL,	7,	0x17c,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("uartc",	"uart.2",		NULL,	55,	0x1a0,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("uartd",	"uart.3",		NULL,	65,	0x1c0,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET),
+	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	/* FIXME: vi and vi_sensor share an enable */
+	PERIPH_CLK("vi",	"vi",			NULL,	20,	0x148,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	PERIPH_CLK("vi_sensor",	"vi_sensor",		NULL,	20,	0x1a8,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	mux_pllm_pllc_pllp_plla,	MUX | DIV_U71),
+	/* FIXME: cve and tvo share an enable	*/
+	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("tvdac",	"tvdac",		NULL,	53,	0x194,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("disp1",	"tegrafb.0",		NULL,	27,	0x138,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("disp2",	"tegrafb.1",		NULL,	26,	0x13c,	mux_pllp_plld_pllc_clkm,	MUX | DIV_U71),
+	PERIPH_CLK("usbd",	"fsl-tegra-udc",	NULL,	22,	0,	mux_clk_m,			0),
+	PERIPH_CLK("usb2",	"usb.1",		NULL,	58,	0,	mux_clk_m,			0),
+	PERIPH_CLK("usb3",	"usb.2",		NULL,	59,	0,	mux_clk_m,			0),
+	PERIPH_CLK("emc",	"emc",			NULL,	57,	0x19c,	mux_pllm_pllc_pllp_clkm,	MUX | DIV_U71 | PERIPH_EMC_ENB),
+	PERIPH_CLK("dsi",	"dsi",			NULL,	48,	0,	mux_plld,			0),
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con)		\
+	{						\
+		.name	= _name,			\
+		.lookup	= {				\
+			.dev_id	= _dev,			\
+			.con_id		= _con,		\
+		},					\
+	}
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration.  List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+	CLK_DUPLICATE("uarta",	"tegra_uart.0",	NULL),
+	CLK_DUPLICATE("uartb",	"tegra_uart.1",	NULL),
+	CLK_DUPLICATE("uartc",	"tegra_uart.2",	NULL),
+	CLK_DUPLICATE("uartd",	"tegra_uart.3",	NULL),
+	CLK_DUPLICATE("uarte",	"tegra_uart.4",	NULL),
+};
+
+#define CLK(dev, con, ck)	\
+	{			\
+		.dev_id = dev,	\
+		.con_id = con,	\
+		.clk = ck,	\
+	}
+
+struct clk_lookup tegra_clk_lookups[] = {
+	/* external root sources */
+	CLK(NULL,	"32k_clk",	&tegra_clk_32k),
+	CLK(NULL,	"pll_s",	&tegra_pll_s),
+	CLK(NULL,	"clk_m",	&tegra_clk_m),
+	CLK(NULL,	"pll_m",	&tegra_pll_m),
+	CLK(NULL,	"pll_m_out1",	&tegra_pll_m_out1),
+	CLK(NULL,	"pll_c",	&tegra_pll_c),
+	CLK(NULL,	"pll_c_out1",	&tegra_pll_c_out1),
+	CLK(NULL,	"pll_p",	&tegra_pll_p),
+	CLK(NULL,	"pll_p_out1",	&tegra_pll_p_out1),
+	CLK(NULL,	"pll_p_out2",	&tegra_pll_p_out2),
+	CLK(NULL,	"pll_p_out3",	&tegra_pll_p_out3),
+	CLK(NULL,	"pll_p_out4",	&tegra_pll_p_out4),
+	CLK(NULL,	"pll_a",	&tegra_pll_a),
+	CLK(NULL,	"pll_a_out0",	&tegra_pll_a_out0),
+	CLK(NULL,	"pll_d",	&tegra_pll_d),
+	CLK(NULL,	"pll_d_out0",	&tegra_pll_d_out0),
+	CLK(NULL,	"pll_u",	&tegra_pll_u),
+	CLK(NULL,	"pll_x",	&tegra_pll_x),
+	CLK(NULL,	"cpu",		&tegra_clk_cpu),
+	CLK(NULL,	"sys",		&tegra_clk_sys),
+	CLK(NULL,	"hclk",		&tegra_clk_hclk),
+	CLK(NULL,	"pclk",		&tegra_clk_pclk),
+	CLK(NULL,	"clk_d",	&tegra_clk_d),
+};
+
+void __init tegra2_init_clocks(void)
+{
+	int i;
+	struct clk_lookup *cl;
+	struct clk *c;
+	struct clk_duplicate *cd;
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_lookups); i++) {
+		cl = &tegra_clk_lookups[i];
+		clk_init(cl->clk);
+		clkdev_add(cl);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_periph_clks); i++) {
+		c = &tegra_periph_clks[i];
+		cl = &c->lookup;
+		cl->clk = c;
+
+		clk_init(cl->clk);
+		clkdev_add(cl);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+		cd = &tegra_clk_duplicates[i];
+		c = tegra_get_clock_by_name(cd->name);
+		if (c) {
+			cl = &cd->lookup;
+			cl->clk = c;
+			clkdev_add(cl);
+		} else {
+			pr_err("%s: Unknown duplicate clock %s\n", __func__,
+				cd->name);
+		}
+	}
+}
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
new file mode 100644
index 00000000000..2f420210d40
--- /dev/null
+++ b/arch/arm/mach-tegra/timer.c
@@ -0,0 +1,187 @@
+/*
+ * arch/arch/mach-tegra/timer.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cnt32_to_63.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/time.h>
+#include <asm/localtimer.h>
+
+#include <mach/iomap.h>
+#include <mach/irqs.h>
+
+#include "board.h"
+#include "clock.h"
+
+#define TIMERUS_CNTR_1US 0x10
+#define TIMERUS_USEC_CFG 0x14
+#define TIMERUS_CNTR_FREEZE 0x4c
+
+#define TIMER1_BASE 0x0
+#define TIMER2_BASE 0x8
+#define TIMER3_BASE 0x50
+#define TIMER4_BASE 0x58
+
+#define TIMER_PTV 0x0
+#define TIMER_PCR 0x4
+
+struct tegra_timer;
+
+static void __iomem *timer_reg_base = IO_ADDRESS(TEGRA_TMR1_BASE);
+
+#define timer_writel(value, reg) \
+	__raw_writel(value, (u32)timer_reg_base + (reg))
+#define timer_readl(reg) \
+	__raw_readl((u32)timer_reg_base + (reg))
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
+{
+	u32 reg;
+
+	reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0);
+	timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+
+	return 0;
+}
+
+static void tegra_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 reg;
+
+	timer_writel(0, TIMER3_BASE + TIMER_PTV);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		reg = 0xC0000000 | ((1000000/HZ)-1);
+		timer_writel(reg, TIMER3_BASE + TIMER_PTV);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static cycle_t tegra_clocksource_read(struct clocksource *cs)
+{
+	return cnt32_to_63(timer_readl(TIMERUS_CNTR_1US));
+}
+
+static struct clock_event_device tegra_clockevent = {
+	.name		= "timer0",
+	.rating		= 300,
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event	= tegra_timer_set_next_event,
+	.set_mode	= tegra_timer_set_mode,
+};
+
+static struct clocksource tegra_clocksource = {
+	.name	= "timer_us",
+	.rating	= 300,
+	.read	= tegra_clocksource_read,
+	.mask	= 0x7FFFFFFFFFFFFFFFULL,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+unsigned long long sched_clock(void)
+{
+	return clocksource_cyc2ns(tegra_clocksource.read(&tegra_clocksource),
+		tegra_clocksource.mult, tegra_clocksource.shift);
+}
+
+static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	timer_writel(1<<30, TIMER3_BASE + TIMER_PCR);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction tegra_timer_irq = {
+	.name		= "timer0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH,
+	.handler	= tegra_timer_interrupt,
+	.dev_id		= &tegra_clockevent,
+	.irq		= INT_TMR3,
+};
+
+static void __init tegra_init_timer(void)
+{
+	unsigned long rate = clk_measure_input_freq();
+	int ret;
+
+#ifdef CONFIG_HAVE_ARM_TWD
+	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
+#endif
+
+	switch (rate) {
+	case 12000000:
+		timer_writel(0x000b, TIMERUS_USEC_CFG);
+		break;
+	case 13000000:
+		timer_writel(0x000c, TIMERUS_USEC_CFG);
+		break;
+	case 19200000:
+		timer_writel(0x045f, TIMERUS_USEC_CFG);
+		break;
+	case 26000000:
+		timer_writel(0x0019, TIMERUS_USEC_CFG);
+		break;
+	default:
+		WARN(1, "Unknown clock rate");
+	}
+
+	if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
+		printk(KERN_ERR "Failed to register clocksource\n");
+		BUG();
+	}
+
+	ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq);
+	if (ret) {
+		printk(KERN_ERR "Failed to register timer IRQ: %d\n", ret);
+		BUG();
+	}
+
+	clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
+	tegra_clockevent.max_delta_ns =
+		clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
+	tegra_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x1, &tegra_clockevent);
+	tegra_clockevent.cpumask = cpu_all_mask;
+	tegra_clockevent.irq = tegra_timer_irq.irq;
+	clockevents_register_device(&tegra_clockevent);
+
+	return;
+}
+
+struct sys_timer tegra_timer = {
+	.init = tegra_init_timer,
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 654fca944e6..9280d256111 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -113,26 +113,21 @@ struct platform_device u8500_i2c4_device = {
 static struct resource dma40_resources[] = {
 	[0] = {
 		.start = U8500_DMA_BASE,
-		.end = U8500_DMA_BASE + SZ_4K - 1,
+		.end   = U8500_DMA_BASE + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-		.name = "base",
+		.name  = "base",
 	},
 	[1] = {
 		.start = U8500_DMA_LCPA_BASE,
-		.end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
 		.flags = IORESOURCE_MEM,
-		.name = "lcpa",
+		.name  = "lcpa",
 	},
 	[2] = {
-		.start = U8500_DMA_LCLA_BASE,
-		.end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
-		.flags = IORESOURCE_MEM,
-		.name = "lcla",
-	},
-	[3] = {
 		.start = IRQ_DB8500_DMA,
 		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ}
+		.flags = IORESOURCE_IRQ,
+	}
 };
 
 /* Default configuration for physcial memcpy */
@@ -145,11 +140,12 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
 	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
 	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
-
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
 /* Default configuration for logical memcpy */
 struct stedma40_chan_cfg dma40_memcpy_conf_log = {
@@ -162,11 +158,12 @@ struct stedma40_chan_cfg dma40_memcpy_conf_log = {
 	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
 	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 };
 
 /*
@@ -180,10 +177,12 @@ static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
 
 /* Reserved event lines for memcpy only */
 static int dma40_memcpy_event[] = {
+	STEDMA40_MEMCPY_TX_0,
 	STEDMA40_MEMCPY_TX_1,
 	STEDMA40_MEMCPY_TX_2,
 	STEDMA40_MEMCPY_TX_3,
 	STEDMA40_MEMCPY_TX_4,
+	STEDMA40_MEMCPY_TX_5,
 };
 
 static struct stedma40_platform_data dma40_plat_data = {
@@ -195,6 +194,7 @@ static struct stedma40_platform_data dma40_plat_data = {
 	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
 	.memcpy_conf_log = &dma40_memcpy_conf_log,
 	.llis_per_log = 8,
+	.disabled_channels = {-1},
 };
 
 struct platform_device u8500_dma40_device = {
@@ -213,4 +213,6 @@ void dma40_u8500ed_fixup(void)
 	dma40_plat_data.memcpy_len = 0;
 	dma40_resources[0].start = U8500_DMA_BASE_ED;
 	dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+	dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
+	dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
 }
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 85fc6a80b38..f000218210c 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -15,9 +15,9 @@
 #define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
 #define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
-/* Use bank 4 for DMA LCLA and LCPA */
-#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
-#define U8500_DMA_LCPA_BASE	(U8500_ESRAM_BANK4 + 0x4000)
+/* Use bank 4 for DMA LCPA */
+#define U8500_DMA_LCPA_BASE	U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE_ED	(U8500_ESRAM_BANK4 + 0x4000)
 
 #define U8500_PER3_BASE		0x80000000
 #define U8500_STM_BASE		0x80100000
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
index e7016278dfa..9d9d3797b3b 100644
--- a/arch/arm/mach-ux500/ste-dma40-db8500.h
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -136,7 +136,7 @@ enum dma_dest_dev_type {
 	STEDMA40_DEV_CAC1_TX = 48,
 	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
 	STEDMA40_DEV_HAC1_TX = 50,
-	STEDMA40_MEMXCPY_TX_0 = 51,
+	STEDMA40_MEMCPY_TX_0 = 51,
 	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
 	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
 	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 87ec141fcaa..e1fd98fff8f 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -771,7 +771,8 @@ config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
-		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+		   ARCH_TEGRA
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 6ab244062b4..1fbdb55bfd1 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -82,7 +82,7 @@ void *kmap_atomic(struct page *page, enum km_type type)
 }
 EXPORT_SYMBOL(kmap_atomic);
 
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
@@ -103,7 +103,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	}
 	pagefault_enable();
 }
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_notypecheck);
 
 void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 {
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
index c34ded523f1..63f3c280423 100644
--- a/arch/arm/plat-mxc/include/mach/ssi.h
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -10,6 +10,9 @@ struct imx_ssi_platform_data {
 	unsigned int flags;
 #define IMX_SSI_DMA            (1 << 0)
 #define IMX_SSI_USE_AC97       (1 << 1)
+#define IMX_SSI_NET            (1 << 2)
+#define IMX_SSI_SYN            (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
 	void (*ac97_reset) (struct snd_ac97 *ac97);
 	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
 };
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index 4d12ea4ca36..5fbde4b8dc1 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -148,7 +148,8 @@ struct stedma40_chan_cfg {
  * @memcpy_conf_phy: default configuration of physical channel memcpy
  * @memcpy_conf_log: default configuration of logical channel memcpy
  * @llis_per_log: number of max linked list items per logical channel
- *
+ * @disabled_channels: A vector, ending with -1, that marks physical channels
+ * that are for different reasons not available for the driver.
  */
 struct stedma40_platform_data {
 	u32				 dev_len;
@@ -159,6 +160,7 @@ struct stedma40_platform_data {
 	struct stedma40_chan_cfg	*memcpy_conf_phy;
 	struct stedma40_chan_cfg	*memcpy_conf_log;
 	unsigned int			 llis_per_log;
+	int				 disabled_channels[8];
 };
 
 /**
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 78b49a626d0..e39a417a368 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_OMAP
 
-menu "TI OMAP Implementations"
+menu "TI OMAP Common Features"
 
 config ARCH_OMAP_OTG
 	bool
@@ -21,24 +21,6 @@ config ARCH_OMAP2PLUS
 	help
 	  "Systems based on omap24xx, omap34xx or omap44xx"
 
-config ARCH_OMAP2
-	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V6
-
-config ARCH_OMAP3
-	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V7
-	select USB_ARCH_HAS_EHCI
-	select ARM_L1_CACHE_SHIFT_6
-
-config ARCH_OMAP4
-	bool "TI OMAP4"
-	depends on ARCH_OMAP2PLUS
-	select CPU_V7
-	select ARM_GIC
-
 endchoice
 
 comment "OMAP Feature Selections"
@@ -51,7 +33,7 @@ config OMAP_DEBUG_DEVICES
 config OMAP_DEBUG_LEDS
 	bool
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS || LEDS_OMAP_DEBUG
+	default y if LEDS
 
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
@@ -106,6 +88,15 @@ config OMAP_MBOX_FWK
 	  Say Y here if you want to use OMAP Mailbox framework support for
 	  DSP, IVA1.0 and IVA2 in OMAP1/2/3.
 
+config OMAP_MBOX_KFIFO_SIZE
+	int "Mailbox kfifo default buffer size (bytes)"
+	depends on OMAP_MBOX_FWK
+	default 256
+	help
+	  Specify the default size of mailbox's kfifo buffers (bytes).
+	  This can also be changed at runtime (via the mbox_kfifo_size
+	  module parameter).
+
 config OMAP_IOMMU
 	tristate
 
@@ -120,7 +111,7 @@ config OMAP_IOMMU_DEBUG
 
 choice
 	prompt "System timer"
-	default OMAP_MPU_TIMER
+	default OMAP_32K_TIMER if !ARCH_OMAP15XX
 
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 98f01910c2c..9405831b746 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 # omap_device support (OMAP2+ only at the moment)
 obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index ebed82699eb..3008e710448 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -317,18 +317,18 @@ static struct omap_globals omap3_globals = {
 	.uart1_phys	= OMAP3_UART1_BASE,
 	.uart2_phys	= OMAP3_UART2_BASE,
 	.uart3_phys	= OMAP3_UART3_BASE,
+	.uart4_phys	= OMAP3_UART4_BASE,	/* Only on 3630 */
 };
 
-void __init omap2_set_globals_343x(void)
+void __init omap2_set_globals_3xxx(void)
 {
 	__omap2_set_globals(&omap3_globals);
 }
 
-void __init omap2_set_globals_36xx(void)
+void __init omap3_map_io(void)
 {
-	omap3_globals.uart4_phys = OMAP3_UART4_BASE;
-
-	__omap2_set_globals(&omap3_globals);
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
 }
 #endif
 
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 53fcef7c520..fc05b102260 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -39,7 +39,7 @@ static struct h2p2_dbg_fpga __iomem	*fpga;
 static u16				led_state, hw_led_state;
 
 
-#ifdef	CONFIG_LEDS_OMAP_DEBUG
+#ifdef	CONFIG_OMAP_DEBUG_LEDS
 #define new_led_api()	1
 #else
 #define new_led_api()	0
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 95677d17cd1..d1920be7833 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -24,135 +24,13 @@
 #include <plat/control.h>
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/menelaus.h>
 #include <plat/mcbsp.h>
-#include <plat/dsp_common.h>
 #include <plat/omap44xx.h>
 
-#if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-
-static struct dsp_platform_data dsp_pdata = {
-	.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
-};
-
-static struct resource omap_dsp_resources[] = {
-	{
-		.name	= "dsp_mmu",
-		.start	= -1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device omap_dsp_device = {
-	.name		= "dsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap_dsp_resources),
-	.resource	= omap_dsp_resources,
-	.dev = {
-		.platform_data = &dsp_pdata,
-	},
-};
-
-static inline void omap_init_dsp(void)
-{
-	struct resource *res;
-	int irq;
-
-	if (cpu_is_omap15xx())
-		irq = INT_1510_DSP_MMU;
-	else if (cpu_is_omap16xx())
-		irq = INT_1610_DSP_MMU;
-	else if (cpu_is_omap24xx())
-		irq = INT_24XX_DSP_MMU;
-
-	res = platform_get_resource_byname(&omap_dsp_device,
-					   IORESOURCE_IRQ, "dsp_mmu");
-	res->start = irq;
-
-	platform_device_register(&omap_dsp_device);
-}
-
-int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
-{
-	static DEFINE_MUTEX(dsp_pdata_lock);
-
-	spin_lock_init(&kdev->lock);
-
-	mutex_lock(&dsp_pdata_lock);
-	list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
-	mutex_unlock(&dsp_pdata_lock);
-
-	return 0;
-}
-EXPORT_SYMBOL(dsp_kfunc_device_register);
-
-#else
-static inline void omap_init_dsp(void) { }
-#endif	/* CONFIG_OMAP_DSP */
-
 /*-------------------------------------------------------------------------*/
-#if	defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
-
-static void omap_init_kp(void)
-{
-	/* 2430 and 34xx keypad is on TWL4030 */
-	if (cpu_is_omap2430() || cpu_is_omap34xx())
-		return;
 
-	if (machine_is_omap_h2() || machine_is_omap_h3()) {
-		omap_cfg_reg(F18_1610_KBC0);
-		omap_cfg_reg(D20_1610_KBC1);
-		omap_cfg_reg(D19_1610_KBC2);
-		omap_cfg_reg(E18_1610_KBC3);
-		omap_cfg_reg(C21_1610_KBC4);
-
-		omap_cfg_reg(G18_1610_KBR0);
-		omap_cfg_reg(F19_1610_KBR1);
-		omap_cfg_reg(H14_1610_KBR2);
-		omap_cfg_reg(E20_1610_KBR3);
-		omap_cfg_reg(E19_1610_KBR4);
-		omap_cfg_reg(N19_1610_KBR5);
-	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_7XX_KBR0);
-		omap_cfg_reg(J7_7XX_KBR1);
-		omap_cfg_reg(E1_7XX_KBR2);
-		omap_cfg_reg(F3_7XX_KBR3);
-		omap_cfg_reg(D2_7XX_KBR4);
-
-		omap_cfg_reg(C2_7XX_KBC0);
-		omap_cfg_reg(D3_7XX_KBC1);
-		omap_cfg_reg(E4_7XX_KBC2);
-		omap_cfg_reg(F4_7XX_KBC3);
-		omap_cfg_reg(E3_7XX_KBC4);
-	} else if (machine_is_omap_h4()) {
-		omap_cfg_reg(T19_24XX_KBR0);
-		omap_cfg_reg(R19_24XX_KBR1);
-		omap_cfg_reg(V18_24XX_KBR2);
-		omap_cfg_reg(M21_24XX_KBR3);
-		omap_cfg_reg(E5__24XX_KBR4);
-		if (omap_has_menelaus()) {
-			omap_cfg_reg(B3__24XX_KBR5);
-			omap_cfg_reg(AA4_24XX_KBC2);
-			omap_cfg_reg(B13_24XX_KBC6);
-		} else {
-			omap_cfg_reg(M18_24XX_KBR5);
-			omap_cfg_reg(H19_24XX_KBC2);
-			omap_cfg_reg(N19_24XX_KBC6);
-		}
-		omap_cfg_reg(R20_24XX_KBC0);
-		omap_cfg_reg(M14_24XX_KBC1);
-		omap_cfg_reg(V17_24XX_KBC3);
-		omap_cfg_reg(P21_24XX_KBC4);
-		omap_cfg_reg(L14_24XX_KBC5);
-	}
-}
-#else
-static inline void omap_init_kp(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
 
 static struct platform_device **omap_mcbsp_devices;
@@ -419,8 +297,6 @@ static int __init omap_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_init_dsp();
-	omap_init_kp();
 	omap_init_rng();
 	omap_init_mcpdm();
 	omap_init_uwire();
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index f7f571e7987..ec7eddf9e52 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -290,7 +290,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		val = dma_read(CCR(lch));
 
 		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
-		val &= ~((3 << 19) | 0x1f);
+		val &= ~((1 << 23) | (3 << 19) | 0x1f);
 		val |= (dma_trigger & ~0x1f) << 14;
 		val |= dma_trigger & 0x1f;
 
@@ -304,11 +304,14 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		else
 			val &= ~(1 << 18);
 
-		if (src_or_dst_synch)
+		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
+			val &= ~(1 << 24);	/* dest synch */
+			val |= (1 << 23);	/* Prefetch */
+		} else if (src_or_dst_synch) {
 			val |= 1 << 24;		/* source synch */
-		else
+		} else {
 			val &= ~(1 << 24);	/* dest synch */
-
+		}
 		dma_write(val, CCR(lch));
 	}
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 9b7e3545f32..7951eefe1a0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -390,7 +390,9 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap7xx() && gpio < 192)
 		return 0;
-	if (cpu_is_omap24xx() && gpio < 128)
+	if (cpu_is_omap2420() && gpio < 128)
+		return 0;
+	if (cpu_is_omap2430() && gpio < 160)
 		return 0;
 	if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
 		return 0;
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index eec2b4993c6..a5ce4f0aad3 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 	return platform_device_register(pdev);
 }
 
+/*
+ * XXX This function is a temporary compatibility wrapper - only
+ * needed until the I2C driver can be converted to call
+ * omap_pm_set_max_dev_wakeup_lat() and handle a return code.
+ */
+static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
+{
+	omap_pm_set_max_mpu_wakeup_lat(dev, t);
+}
+
 static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
 	struct resource *res;
@@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
 		struct omap_i2c_bus_platform_data *pd;
 
 		pd = pdev->dev.platform_data;
-		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	}
 
 	return platform_device_register(pdev);
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 5cd622039da..3cf4fa25ab3 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -85,6 +85,14 @@ struct omap_usb_config {
 	 *  6 == 6 wire unidirectional (or TLL)
 	 */
 	u8		pins[3];
+
+	struct platform_device *udc_device;
+	struct platform_device *ohci_device;
+	struct platform_device *otg_device;
+
+	u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+	u32 (*usb1_init)(unsigned nwires);
+	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
 };
 
 struct omap_lcd_config {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index dfc472ca0cc..fef4696dcf6 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -19,6 +19,22 @@ struct module;
 struct clk;
 struct clockdomain;
 
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
@@ -30,12 +46,45 @@ struct clkops {
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ *
+ * XXX @flags probably should be replaced with an struct omap_chip.
+ */
 struct clksel_rate {
 	u32			val;
 	u8			div;
 	u8			flags;
 };
 
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
 struct clksel {
 	struct clk		 *parent;
 	const struct clksel_rate *rates;
@@ -116,6 +165,60 @@ struct dpll_data {
 
 #endif
 
+/* struct clk.flags possibilities */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
 struct clk {
 	struct list_head	node;
 	const struct clkops	*ops;
@@ -129,8 +232,8 @@ struct clk {
 	int			(*set_rate)(struct clk *, unsigned long);
 	long			(*round_rate)(struct clk *, unsigned long);
 	void			(*init)(struct clk *);
-	__u8			enable_bit;
-	__s8			usecount;
+	u8			enable_bit;
+	s8			usecount;
 	u8			fixed_div;
 	u8			flags;
 #ifdef CONFIG_ARCH_OMAP2PLUS
@@ -141,8 +244,8 @@ struct clk {
 	const char		*clkdm_name;
 	struct clockdomain	*clkdm;
 #else
-	__u8			rate_offset;
-	__u8			src_offset;
+	u8			rate_offset;
+	u8			src_offset;
 #endif
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 	struct dentry		*dent;	/* For visible tree hierarchy */
@@ -188,23 +291,4 @@ extern const struct clkops clkops_null;
 
 extern struct clk dummy_ck;
 
-/* Clock flags */
-#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 1)
-#define CLOCK_NO_IDLE_PARENT	(1 << 2)
-#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
-
-/* Clksel_rate flags */
-#define RATE_IN_242X		(1 << 0)
-#define RATE_IN_243X		(1 << 1)
-#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
-#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
-#define RATE_IN_36XX		(1 << 4)
-#define RATE_IN_4430		(1 << 5)
-
-#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-
-#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
-
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 5e4afbee0fd..9776b41ad76 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -58,8 +58,7 @@ struct omap_globals {
 
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-void omap2_set_globals_36xx(void);
+void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -69,6 +68,8 @@ void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 void omap2_set_globals_uart(struct omap_globals *);
 
+void omap3_map_io(void);
+
 /**
  * omap_test_timeout - busy-loop, testing a condition
  * @cond: condition to test until it evaluates to true
@@ -89,4 +90,8 @@ void omap2_set_globals_uart(struct omap_globals *);
 	}							\
 })
 
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_dsp_device(void);
+extern struct device *omap2_get_l3_device(void);
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 75141742300..2e2ae530fce 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -66,6 +66,8 @@ unsigned int omap_rev(void);
  * family. This difference can be handled separately.
  */
 #define OMAP_REVBITS_00		0x00
+#define OMAP_REVBITS_01		0x01
+#define OMAP_REVBITS_02		0x02
 #define OMAP_REVBITS_10		0x10
 #define OMAP_REVBITS_20		0x20
 #define OMAP_REVBITS_30		0x30
@@ -376,6 +378,8 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3430_REV_ES3_1_2	0x34305034
 
 #define OMAP3630_REV_ES1_0	0x36300034
+#define OMAP3630_REV_ES1_1	0x36300134
+#define OMAP3630_REV_ES1_2	0x36300234
 
 #define OMAP35XX_CLASS		0x35000034
 #define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
@@ -411,6 +415,8 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
 #define CHIP_IS_OMAP3630ES1		(1 << 7)
 #define CHIP_IS_OMAP4430ES1		(1 << 8)
+#define CHIP_IS_OMAP3630ES1_1           (1 << 9)
+#define CHIP_IS_OMAP3630ES1_2           (1 << 10)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
@@ -424,11 +430,12 @@ IS_OMAP_TYPE(3517, 0x3517)
  */
 #define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
 					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1 | \
-					 CHIP_IS_OMAP3630ES1)
+					 CHIP_GE_OMAP3430ES3_1)
 #define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
-					 CHIP_IS_OMAP3630ES1)
-
+					 CHIP_IS_OMAP3630ES1 | \
+					 CHIP_GE_OMAP3630ES1_1)
+#define CHIP_GE_OMAP3630ES1_1		(CHIP_IS_OMAP3630ES1_1 | \
+					 CHIP_IS_OMAP3630ES1_2)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
@@ -444,6 +451,7 @@ extern u32 omap3_features;
 #define OMAP3_HAS_NEON			BIT(3)
 #define OMAP3_HAS_ISP			BIT(4)
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
+#define OMAP3_HAS_IO_WAKEUP		BIT(6)
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
 static inline unsigned int omap3_has_ ##feat(void)	\
@@ -457,5 +465,6 @@ OMAP3_HAS_FEATURE(iva, IVA)
 OMAP3_HAS_FEATURE(neon, NEON)
 OMAP3_HAS_FEATURE(isp, ISP)
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
+OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
index 1c529ce9dc1..8bd15bdb413 100644
--- a/arch/arm/plat-omap/include/plat/display.h
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -238,7 +238,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
 int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
 int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2);
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
 int dsi_vc_send_null(int channel);
 int dsi_vc_send_bta_sync(int channel);
@@ -277,8 +277,8 @@ struct omap_video_timings {
  * identify the mode, and does not actually use the configs
  * itself. However, the configs should be something that
  * a normal monitor can also show */
-const extern struct omap_video_timings omap_dss_pal_timings;
-const extern struct omap_video_timings omap_dss_ntsc_timings;
+extern const struct omap_video_timings omap_dss_pal_timings;
+extern const struct omap_video_timings omap_dss_ntsc_timings;
 #endif
 
 struct omap_overlay_info {
@@ -560,7 +560,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable);
 int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
-				    u16 *x, u16 *y, u16 *w, u16 *h);
+				    u16 *x, u16 *y, u16 *w, u16 *h,
+				    bool enlarge_update_area);
 int omap_dsi_update(struct omap_dss_device *dssdev,
 		int channel,
 		u16 x, u16 y, u16 w, u16 h,
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 02232ca2c37..af3a03941ad 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -345,6 +345,7 @@
 #define OMAP_DMA_SYNC_BLOCK		0x02
 #define OMAP_DMA_SYNC_PACKET		0x03
 
+#define OMAP_DMA_DST_SYNC_PREFETCH	0x02
 #define OMAP_DMA_SRC_SYNC		0x01
 #define OMAP_DMA_DST_SYNC		0x00
 
diff --git a/arch/arm/plat-omap/include/plat/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
deleted file mode 100644
index da97736f3ef..00000000000
--- a/arch/arm/plat-omap/include/plat/dsp_common.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
- *
- * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
- *
- * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef ASM_ARCH_DSP_COMMON_H
-#define ASM_ARCH_DSP_COMMON_H
-
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
-extern void omap_dsp_request_mpui(void);
-extern void omap_dsp_release_mpui(void);
-extern int omap_dsp_request_mem(void);
-extern int omap_dsp_release_mem(void);
-#else
-static inline int omap_dsp_request_mem(void)
-{
-	return 0;
-}
-#define omap_dsp_release_mem()	do {} while (0)
-#endif
-
-#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 145838a81ef..9fd99b9e40a 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -25,10 +25,26 @@
 #define GPMC_CS_NAND_ADDRESS	0x20
 #define GPMC_CS_NAND_DATA	0x24
 
-#define GPMC_CONFIG		0x50
-#define GPMC_STATUS		0x54
-#define GPMC_CS0_BASE		0x60
-#define GPMC_CS_SIZE		0x30
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY	0x00000001
+#define GPMC_CONFIG_DEV_SIZE	0x00000002
+#define GPMC_CONFIG_DEV_TYPE	0x00000003
+#define GPMC_SET_IRQ_STATUS	0x00000004
+#define GPMC_CONFIG_WP		0x00000005
+
+#define GPMC_GET_IRQ_STATUS	0x00000006
+#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
+#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
+#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
+
+#define GPMC_NAND_COMMAND	0x0000000a
+#define GPMC_NAND_ADDRESS	0x0000000b
+#define GPMC_NAND_DATA		0x0000000c
+
+/* ECC commands */
+#define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE		1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN	2 /* Reset before syndrom is read back */
 
 #define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
 #define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
@@ -47,7 +63,6 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
 #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
@@ -56,6 +71,14 @@
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
 #define GPMC_CONFIG7_CSVALID		(1 << 6)
 
+#define GPMC_DEVICETYPE_NOR		0
+#define GPMC_DEVICETYPE_NAND		2
+#define GPMC_CONFIG_WRITEPROTECT	0x00000010
+#define GPMC_STATUS_BUFF_EMPTY		0x00000001
+#define WR_RD_PIN_MONITORING		0x00600000
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+
 /*
  * Note that all values in this struct are in nanoseconds, while
  * the register values are in gpmc_fck cycles.
@@ -108,10 +131,15 @@ extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
 extern int gpmc_prefetch_enable(int cs, int dma_mode,
 					unsigned int u32_count, int is_write);
-extern void gpmc_prefetch_reset(void);
-extern int gpmc_prefetch_status(void);
+extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
 extern void gpmc_init(void);
+extern int gpmc_read_status(int cmd);
+extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_nand_read(int cs, int cmd);
+extern int gpmc_nand_write(int cs, int cmd, int wval);
 
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
 #endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 0752af9d099..33c7d41cb6a 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -80,6 +80,7 @@ struct iommu_functions {
 
 	int (*enable)(struct iommu *obj);
 	void (*disable)(struct iommu *obj);
+	void (*set_twl)(struct iommu *obj, bool on);
 	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
 
 	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
@@ -143,6 +144,7 @@ extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
 extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
 
 extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void iommu_set_twl(struct iommu *obj, bool on);
 extern void flush_iotlb_page(struct iommu *obj, u32 da);
 extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
 extern void flush_iotlb_all(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index 729166b76a7..99765655210 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -3,10 +3,11 @@
 #ifndef MAILBOX_H
 #define MAILBOX_H
 
-#include <linux/wait.h>
+#include <linux/spinlock.h>
 #include <linux/workqueue.h>
-#include <linux/blkdev.h>
 #include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kfifo.h>
 
 typedef u32 mbox_msg_t;
 struct omap_mbox;
@@ -42,7 +43,7 @@ struct omap_mbox_ops {
 
 struct omap_mbox_queue {
 	spinlock_t		lock;
-	struct request_queue	*queue;
+	struct kfifo		fifo;
 	struct work_struct	work;
 	struct tasklet_struct	tasklet;
 	int	(*callback)(void *);
@@ -52,19 +53,10 @@ struct omap_mbox_queue {
 struct omap_mbox {
 	char			*name;
 	unsigned int		irq;
-
 	struct omap_mbox_queue	*txq, *rxq;
-
 	struct omap_mbox_ops	*ops;
-
-	mbox_msg_t		seq_snd, seq_rcv;
-
 	struct device		*dev;
-
-	struct omap_mbox	*next;
 	void			*priv;
-
-	void			(*err_notify)(void);
 };
 
 int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
@@ -73,8 +65,8 @@ void omap_mbox_init_seq(struct omap_mbox *);
 struct omap_mbox *omap_mbox_get(const char *);
 void omap_mbox_put(struct omap_mbox *);
 
-int omap_mbox_register(struct device *parent, struct omap_mbox *);
-int omap_mbox_unregister(struct omap_mbox *);
+int omap_mbox_register(struct device *parent, struct omap_mbox **);
+int omap_mbox_unregister(void);
 
 static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
 {
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 975744f10a5..b4ff6a11a8f 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -473,6 +473,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+u16 omap_mcbsp_get_fifo_size(unsigned int id);
 u16 omap_mcbsp_get_tx_delay(unsigned int id);
 u16 omap_mcbsp_get_rx_delay(unsigned int id);
 int omap_mcbsp_get_dma_op_mode(unsigned int id);
@@ -483,6 +484,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
 static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index c7472a28ce2..aeba71796ad 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -114,28 +114,11 @@
 	PU_PD_REG(NA, 0)		\
 },
 
-#define MUX_CFG_24XX(desc, reg_offset, mode,			\
-				pull_en, pull_mode, dbg)	\
-{								\
-	.name		= desc,					\
-	.debug		= dbg,					\
-	.mux_reg	= reg_offset,				\
-	.mask		= mode,					\
-	.pull_val	= pull_en,				\
-	.pu_pd_val	= pull_mode,				\
-},
-
-/* 24xx/34xx mux bit defines */
-#define OMAP2_PULL_ENA		(1 << 3)
-#define OMAP2_PULL_UP		(1 << 4)
-#define OMAP2_ALTELECTRICALSEL	(1 << 5)
-
 struct pin_config {
 	char 			*name;
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 
@@ -147,7 +130,6 @@ struct pin_config {
 	const char *pu_pd_name;
 	const unsigned int pu_pd_reg;
 	const unsigned char pu_pd_val;
-#endif
 
 #if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
 	const char *mux_reg_name;
@@ -191,6 +173,10 @@ enum omap7xx_index {
 	SPI_7XX_4,
 	SPI_7XX_5,
 	SPI_7XX_6,
+
+	/* UART */
+	UART_7XX_1,
+	UART_7XX_2,
 };
 
 enum omap1xxx_index {
@@ -446,208 +432,6 @@ enum omap1xxx_index {
 
 };
 
-enum omap24xx_index {
-	/* 24xx I2C */
-	M19_24XX_I2C1_SCL,
-	L15_24XX_I2C1_SDA,
-	J15_24XX_I2C2_SCL,
-	H19_24XX_I2C2_SDA,
-
-	/* 24xx Menelaus interrupt */
-	W19_24XX_SYS_NIRQ,
-
-	/* 24xx clock */
-	W14_24XX_SYS_CLKOUT,
-
-	/* 24xx GPMC chipselects, wait pin monitoring */
-	E2_GPMC_NCS2,
-	L2_GPMC_NCS7,
-	L3_GPMC_WAIT0,
-	N7_GPMC_WAIT1,
-	M1_GPMC_WAIT2,
-	P1_GPMC_WAIT3,
-
-	/* 242X McBSP */
-	Y15_24XX_MCBSP2_CLKX,
-	R14_24XX_MCBSP2_FSX,
-	W15_24XX_MCBSP2_DR,
-	V15_24XX_MCBSP2_DX,
-
-	/* 24xx GPIO */
-	M21_242X_GPIO11,
-	P21_242X_GPIO12,
-	AA10_242X_GPIO13,
-	AA6_242X_GPIO14,
-	AA4_242X_GPIO15,
-	Y11_242X_GPIO16,
-	AA12_242X_GPIO17,
-	AA8_242X_GPIO58,
-	Y20_24XX_GPIO60,
-	W4__24XX_GPIO74,
-	N15_24XX_GPIO85,
-	M15_24XX_GPIO92,
-	P20_24XX_GPIO93,
-	P18_24XX_GPIO95,
-	M18_24XX_GPIO96,
-	L14_24XX_GPIO97,
-	J15_24XX_GPIO99,
-	V14_24XX_GPIO117,
-	P14_24XX_GPIO125,
-
-	/* 242x DBG GPIO */
-	V4_242X_GPIO49,
-	W2_242X_GPIO50,
-	U4_242X_GPIO51,
-	V3_242X_GPIO52,
-	V2_242X_GPIO53,
-	V6_242X_GPIO53,
-	T4_242X_GPIO54,
-	Y4_242X_GPIO54,
-	T3_242X_GPIO55,
-	U2_242X_GPIO56,
-
-	/* 24xx external DMA requests */
-	AA10_242X_DMAREQ0,
-	AA6_242X_DMAREQ1,
-	E4_242X_DMAREQ2,
-	G4_242X_DMAREQ3,
-	D3_242X_DMAREQ4,
-	E3_242X_DMAREQ5,
-
-	/* UART3 */
-	K15_24XX_UART3_TX,
-	K14_24XX_UART3_RX,
-
-	/* MMC/SDIO */
-	G19_24XX_MMC_CLKO,
-	H18_24XX_MMC_CMD,
-	F20_24XX_MMC_DAT0,
-	H14_24XX_MMC_DAT1,
-	E19_24XX_MMC_DAT2,
-	D19_24XX_MMC_DAT3,
-	F19_24XX_MMC_DAT_DIR0,
-	E20_24XX_MMC_DAT_DIR1,
-	F18_24XX_MMC_DAT_DIR2,
-	E18_24XX_MMC_DAT_DIR3,
-	G18_24XX_MMC_CMD_DIR,
-	H15_24XX_MMC_CLKI,
-
-	/* Full speed USB */
-	J20_24XX_USB0_PUEN,
-	J19_24XX_USB0_VP,
-	K20_24XX_USB0_VM,
-	J18_24XX_USB0_RCV,
-	K19_24XX_USB0_TXEN,
-	J14_24XX_USB0_SE0,
-	K18_24XX_USB0_DAT,
-
-	N14_24XX_USB1_SE0,
-	W12_24XX_USB1_SE0,
-	P15_24XX_USB1_DAT,
-	R13_24XX_USB1_DAT,
-	W20_24XX_USB1_TXEN,
-	P13_24XX_USB1_TXEN,
-	V19_24XX_USB1_RCV,
-	V12_24XX_USB1_RCV,
-
-	AA10_24XX_USB2_SE0,
-	Y11_24XX_USB2_DAT,
-	AA12_24XX_USB2_TXEN,
-	AA6_24XX_USB2_RCV,
-	AA4_24XX_USB2_TLLSE0,
-
-	/* Keypad GPIO*/
-	T19_24XX_KBR0,
-	R19_24XX_KBR1,
-	V18_24XX_KBR2,
-	M21_24XX_KBR3,
-	E5__24XX_KBR4,
-	M18_24XX_KBR5,
-	R20_24XX_KBC0,
-	M14_24XX_KBC1,
-	H19_24XX_KBC2,
-	V17_24XX_KBC3,
-	P21_24XX_KBC4,
-	L14_24XX_KBC5,
-	N19_24XX_KBC6,
-
-	/* 24xx Menelaus Keypad GPIO */
-	B3__24XX_KBR5,
-	AA4_24XX_KBC2,
-	B13_24XX_KBC6,
-
-	/* 2430 USB */
-	AD9_2430_USB0_PUEN,
-	Y11_2430_USB0_VP,
-	AD7_2430_USB0_VM,
-	AE7_2430_USB0_RCV,
-	AD4_2430_USB0_TXEN,
-	AF9_2430_USB0_SE0,
-	AE6_2430_USB0_DAT,
-	AD24_2430_USB1_SE0,
-	AB24_2430_USB1_RCV,
-	Y25_2430_USB1_TXEN,
-	AA26_2430_USB1_DAT,
-
-	/* 2430 HS-USB */
-	AD9_2430_USB0HS_DATA3,
-	Y11_2430_USB0HS_DATA4,
-	AD7_2430_USB0HS_DATA5,
-	AE7_2430_USB0HS_DATA6,
-	AD4_2430_USB0HS_DATA2,
-	AF9_2430_USB0HS_DATA0,
-	AE6_2430_USB0HS_DATA1,
-	AE8_2430_USB0HS_CLK,
-	AD8_2430_USB0HS_DIR,
-	AE5_2430_USB0HS_STP,
-	AE9_2430_USB0HS_NXT,
-	AC7_2430_USB0HS_DATA7,
-
-	/* 2430 McBSP */
-	AD6_2430_MCBSP_CLKS,
-
-	AB2_2430_MCBSP1_CLKR,
-	AD5_2430_MCBSP1_FSR,
-	AA1_2430_MCBSP1_DX,
-	AF3_2430_MCBSP1_DR,
-	AB3_2430_MCBSP1_FSX,
-	Y9_2430_MCBSP1_CLKX,
-
-	AC10_2430_MCBSP2_FSX,
-	AD16_2430_MCBSP2_CLX,
-	AE13_2430_MCBSP2_DX,
-	AD13_2430_MCBSP2_DR,
-	AC10_2430_MCBSP2_FSX_OFF,
-	AD16_2430_MCBSP2_CLX_OFF,
-	AE13_2430_MCBSP2_DX_OFF,
-	AD13_2430_MCBSP2_DR_OFF,
-
-	AC9_2430_MCBSP3_CLKX,
-	AE4_2430_MCBSP3_FSX,
-	AE2_2430_MCBSP3_DR,
-	AF4_2430_MCBSP3_DX,
-
-	N3_2430_MCBSP4_CLKX,
-	AD23_2430_MCBSP4_DR,
-	AB25_2430_MCBSP4_DX,
-	AC25_2430_MCBSP4_FSX,
-
-	AE16_2430_MCBSP5_CLKX,
-	AF12_2430_MCBSP5_FSX,
-	K7_2430_MCBSP5_DX,
-	M1_2430_MCBSP5_DR,
-
-	/* 2430 McSPI*/
-	Y18_2430_MCSPI1_CLK,
-	AD15_2430_MCSPI1_SIMO,
-	AE17_2430_MCSPI1_SOMI,
-	U1_2430_MCSPI1_CS0,
-
-	/* Touchscreen GPIO */
-	AF19_2430_GPIO_85,
-
-};
-
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index f8efd5466b1..6562cd082bb 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -21,13 +21,11 @@ struct omap_nand_platform_data {
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
 	unsigned long		phys_base;
-	void __iomem		*gpmc_cs_baseaddr;
-	void __iomem		*gpmc_baseaddr;
 	int			devsize;
 };
 
-/* size (4 KiB) for IO mapping */
-#define	NAND_IO_SIZE	SZ_4K
+/* minimum size for IO mapping */
+#define	NAND_IO_SIZE	4
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern int gpmc_nand_init(struct omap_nand_platform_data *d);
diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h
new file mode 100644
index 00000000000..01ab6572ccb
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h
@@ -0,0 +1,31 @@
+#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+
+#include "display.h"
+
+/**
+ * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration
+ * @name: panel name
+ * @use_ext_te: use external TE
+ * @ext_te_gpio: external TE GPIO
+ * @use_esd_check: perform ESD checks
+ * @max_backlight_level: maximum backlight level
+ * @set_backlight: pointer to backlight set function
+ * @get_backlight: pointer to backlight get function
+ */
+struct nokia_dsi_panel_data {
+	const char *name;
+
+	int reset_gpio;
+
+	bool use_ext_te;
+	int ext_te_gpio;
+
+	bool use_esd_check;
+
+	int max_backlight_level;
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d71149..728fbb9dd54 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -1,8 +1,8 @@
 /*
  * omap-pm.h - OMAP power management interface
  *
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
  * Paul Walmsley
  *
  * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
@@ -16,6 +16,7 @@
 
 #include <linux/device.h>
 #include <linux/cpufreq.h>
+#include <linux/clk.h>
 
 #include "powerdomain.h"
 
@@ -89,7 +90,7 @@ void omap_pm_if_exit(void);
  * @t: maximum MPU wakeup latency in microseconds
  *
  * Request that the maximum interrupt latency for the MPU to be no
- * greater than 't' microseconds. "Interrupt latency" in this case is
+ * greater than @t microseconds. "Interrupt latency" in this case is
  * defined as the elapsed time from the occurrence of a hardware or
  * timer interrupt to the time when the device driver's interrupt
  * service routine has been entered by the MPU.
@@ -105,15 +106,19 @@ void omap_pm_if_exit(void);
  * elapsed from when a device driver enables a hardware device with
  * clk_enable(), to when the device is ready for register access or
  * other use.  To control this device wakeup latency, use
- * set_max_dev_wakeup_lat()
+ * omap_pm_set_max_dev_wakeup_lat()
  *
- * Multiple calls to set_max_mpu_wakeup_lat() will replace the
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
  * previous t value.  To remove the latency target for the MPU, call
  * with t = -1.
  *
- * No return value.
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
 
 
 /**
@@ -123,8 +128,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
  * @r: minimum throughput (in KiB/s)
  *
  * Request that the minimum data throughput on the OCP interconnect
- * attached to device 'dev' interconnect agent 'tbus_id' be no less
- * than 'r' KiB/s.
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
  *
  * It is expected that the OMAP PM or bus code will use this
  * information to set the interconnect clock to run at the lowest
@@ -138,40 +143,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
  * code will also need to add an minimum L3 interconnect speed
  * constraint,
  *
- * Multiple calls to set_min_bus_tput() will replace the previous rate
- * value for this device.  To remove the interconnect throughput
- * restriction for this device, call with r = 0.
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device.  To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
 
 
 /**
  * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
- * @dev: struct device *
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
  * @t: maximum device wakeup latency in microseconds
  *
- * Request that the maximum amount of time necessary for a device to
- * become accessible after its clocks are enabled should be no greater
- * than 't' microseconds.  Specifically, this represents the time from
- * when a device driver enables device clocks with clk_enable(), to
- * when the register reads and writes on the device will succeed.
- * This function should be called before clk_disable() is called,
- * since the power state transition decision may be made during
- * clk_disable().
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds.  Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed.  This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
  *
  * It is intended that underlying PM code will use this information to
  * determine what power state to put the powerdomain enclosing this
  * device into.
  *
- * Multiple calls to set_max_dev_wakeup_lat() will replace the
- * previous wakeup latency values for this device.  To remove the wakeup
- * latency restriction for this device, call with t = -1.
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the
+ * wakeup latency restriction for this device, call with t = -1.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t);
 
 
 /**
@@ -198,10 +207,71 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
  * value for this device.  To remove the maximum DMA latency for this
  * device, call with t = -1.
  *
- * No return value.
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
  */
-void omap_pm_set_max_sdma_lat(struct device *dev, long t);
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
 
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate.  clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices.  Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate.  This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance."  Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision.  Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev.  To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
 
 /*
  * DSP Bridge-specific constraints
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 3694b622c4a..25cd9ac3b09 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 int omap_device_register(struct omap_device *od);
 int omap_early_device_register(struct omap_device *od);
 
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0eccc09ac4a..a4e508dfaba 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -1,7 +1,7 @@
 /*
  * omap_hwmod macros, structures
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  * Paul Walmsley
  *
  * Created in collaboration with (alphabetical order): Benoît Cousson,
@@ -419,7 +419,7 @@ struct omap_hwmod_class {
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
- * @_rt_va: cached register target start address (internal use)
+ * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port_index: cached MPU register target slave ID (internal use)
  * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
  * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
@@ -460,7 +460,7 @@ struct omap_hwmod {
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
 	u32				_sysc_cache;
-	void __iomem			*_rt_va;
+	void __iomem			*_mpu_rt_va;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
@@ -482,11 +482,14 @@ int omap_hwmod_init(struct omap_hwmod **ohs);
 int omap_hwmod_register(struct omap_hwmod *oh);
 int omap_hwmod_unregister(struct omap_hwmod *oh);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
-int omap_hwmod_late_init(void);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+			void *data);
+int omap_hwmod_late_init(u8 skip_setup_idle);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
 int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
@@ -504,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh);
 int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
 
 struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
 
 int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
 				 struct omap_hwmod *init_oh);
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index 8983d54c4fd..6a3ff65c030 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -30,6 +30,7 @@
 extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
 extern void omap_auxcoreboot_addr(u32 cpu_addr);
+extern u32 omap_read_auxcoreboot0(void);
 
 /*
  * We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index bbedd71943f..ddf723be48d 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -25,6 +25,8 @@
 
 #include <plat/serial.h>
 
+#define MDR1_MODE_MASK			0x07
+
 static volatile u8 *uart_base;
 static int uart_shift;
 
@@ -42,6 +44,10 @@ static void putc(int c)
 	if (!uart_base)
 		return;
 
+	/* Check for UART 16x mode */
+	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+		return;
+
 	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
 		barrier();
 	uart_base[UART_TX << uart_shift] = c;
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 98eef5360e6..2a9427c8cc4 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -81,7 +81,34 @@ extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
 
 #endif
 
-void omap_usb_init(struct omap_usb_config *pdata);
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef	CONFIG_USB_GADGET_OMAP
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
+void omap2_usbfs_init(struct omap_usb_config *pdata);
+#else
+static inline omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+}
+#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -192,4 +219,24 @@ void omap_usb_init(struct omap_usb_config *pdata);
 #	define	USB0PUENACTLOI		(1 << 16)
 #	define	USBSTANDBYCTRL		(1 << 15)
 
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+	return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	return 0;
+}
+#endif
+
 #endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index bc094dbacee..a202a2ce6e3 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -370,6 +370,23 @@ void flush_iotlb_all(struct iommu *obj)
 }
 EXPORT_SYMBOL_GPL(flush_iotlb_all);
 
+/**
+ * iommu_set_twl - enable/disable table walking logic
+ * @obj:	target iommu
+ * @on:		enable/disable
+ *
+ * Function used to enable/disable TWL. If one wants to work
+ * exclusively with locked TLB entries and receive notifications
+ * for TLB miss then call this function to disable TWL.
+ */
+void iommu_set_twl(struct iommu *obj, bool on)
+{
+	clk_enable(obj->clk);
+	arch_iommu->set_twl(obj, on);
+	clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(iommu_set_twl);
+
 #if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
 
 ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t bytes)
@@ -653,7 +670,7 @@ void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
 	if (!*iopgd)
 		goto out;
 
-	if (*iopgd & IOPGD_TABLE)
+	if (iopgd_is_table(*iopgd))
 		iopte = iopte_offset(iopgd, da);
 out:
 	*ppgd = iopgd;
@@ -670,7 +687,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 	if (!*iopgd)
 		return 0;
 
-	if (*iopgd & IOPGD_TABLE) {
+	if (iopgd_is_table(*iopgd)) {
 		int i;
 		u32 *iopte = iopte_offset(iopgd, da);
 
@@ -745,7 +762,7 @@ static void iopgtable_clear_entry_all(struct iommu *obj)
 		if (!*iopgd)
 			continue;
 
-		if (*iopgd & IOPGD_TABLE)
+		if (iopgd_is_table(*iopgd))
 			iopte_free(iopte_offset(iopgd, 0));
 
 		*iopgd = 0;
@@ -783,9 +800,11 @@ static irqreturn_t iommu_fault_handler(int irq, void *data)
 	if (!stat)
 		return IRQ_HANDLED;
 
+	iommu_disable(obj);
+
 	iopgd = iopgd_offset(obj, da);
 
-	if (!(*iopgd & IOPGD_TABLE)) {
+	if (!iopgd_is_table(*iopgd)) {
 		dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
 			da, iopgd, *iopgd);
 		return IRQ_NONE;
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h
index ab23b6a140f..c3e93bb0911 100644
--- a/arch/arm/plat-omap/iopgtable.h
+++ b/arch/arm/plat-omap/iopgtable.h
@@ -63,6 +63,8 @@
 #define IOPGD_SECTION		(2 << 0)
 #define IOPGD_SUPER		(1 << 18 | 2 << 0)
 
+#define iopgd_is_table(x)	(((x) & 3) == IOPGD_TABLE)
+
 #define IOPTE_SMALL		(2 << 0)
 #define IOPTE_LARGE		(1 << 0)
 
@@ -70,12 +72,12 @@
 #define iopgd_index(da)		(((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
 #define iopgd_offset(obj, da)	((obj)->iopgd + iopgd_index(da))
 
-#define iopte_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
-#define iopte_vaddr(iopgd)	((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+#define iopgd_page_paddr(iopgd)	(*iopgd & ~((1 << 10) - 1))
+#define iopgd_page_vaddr(iopgd)	((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
 
 /* to find an entry in the second-level page table. */
 #define iopte_index(da)		(((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
-#define iopte_offset(iopgd, da)	(iopte_vaddr(iopgd) + iopte_index(da))
+#define iopte_offset(iopgd, da)	(iopgd_page_vaddr(iopgd) + iopte_index(da))
 
 static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
 				   u32 flags)
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 08a2df76628..d2fafb892f7 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -21,19 +21,26 @@
  *
  */
 
-#include <linux/module.h>
 #include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/kfifo.h>
+#include <linux/err.h>
 
 #include <plat/mailbox.h>
 
 static struct workqueue_struct *mboxd;
-static struct omap_mbox *mboxes;
-static DEFINE_RWLOCK(mboxes_lock);
+static struct omap_mbox **mboxes;
+static bool rq_full;
 
 static int mbox_configured;
+static DEFINE_MUTEX(mbox_configured_lock);
+
+static unsigned int mbox_kfifo_size = CONFIG_OMAP_MBOX_KFIFO_SIZE;
+module_param(mbox_kfifo_size, uint, S_IRUGO);
+MODULE_PARM_DESC(mbox_kfifo_size, "Size of omap's mailbox kfifo (bytes)");
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -67,7 +74,7 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
+static int __mbox_poll_for_space(struct omap_mbox *mbox)
 {
 	int ret = 0, i = 1000;
 
@@ -78,49 +85,50 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 			return -1;
 		udelay(1);
 	}
-	mbox_fifo_write(mbox, msg);
 	return ret;
 }
 
-
 int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
+	struct omap_mbox_queue *mq = mbox->txq;
+	int ret = 0, len;
 
-	struct request *rq;
-	struct request_queue *q = mbox->txq->queue;
+	spin_lock(&mq->lock);
 
-	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq))
-		return -ENOMEM;
+	if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+	WARN_ON(len != sizeof(msg));
 
-	blk_insert_request(q, rq, 0, (void *) msg);
 	tasklet_schedule(&mbox->txq->tasklet);
 
-	return 0;
+out:
+	spin_unlock(&mq->lock);
+	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
 static void mbox_tx_tasklet(unsigned long tx_data)
 {
-	int ret;
-	struct request *rq;
 	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
-	struct request_queue *q = mbox->txq->queue;
-
-	while (1) {
-
-		rq = blk_fetch_request(q);
-
-		if (!rq)
-			break;
+	struct omap_mbox_queue *mq = mbox->txq;
+	mbox_msg_t msg;
+	int ret;
 
-		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
-		if (ret) {
+	while (kfifo_len(&mq->fifo)) {
+		if (__mbox_poll_for_space(mbox)) {
 			omap_mbox_enable_irq(mbox, IRQ_TX);
-			blk_requeue_request(q, rq);
-			return;
+			break;
 		}
-		blk_end_request_all(rq, 0);
+
+		ret = kfifo_out(&mq->fifo, (unsigned char *)&msg,
+								sizeof(msg));
+		WARN_ON(ret != sizeof(msg));
+
+		mbox_fifo_write(mbox, msg);
 	}
 }
 
@@ -131,36 +139,21 @@ static void mbox_rx_work(struct work_struct *work)
 {
 	struct omap_mbox_queue *mq =
 			container_of(work, struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
-	struct request_queue *q = mbox->rxq->queue;
-	struct request *rq;
 	mbox_msg_t msg;
-	unsigned long flags;
+	int len;
 
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-		if (!rq)
-			break;
+	while (kfifo_len(&mq->fifo) >= sizeof(msg)) {
+		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+		WARN_ON(len != sizeof(msg));
 
-		msg = (mbox_msg_t)rq->special;
-		blk_end_request_all(rq, 0);
-		mbox->rxq->callback((void *)msg);
+		if (mq->callback)
+			mq->callback((void *)msg);
 	}
 }
 
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue *q)
-{
-}
-
-static void mbox_rxq_fn(struct request_queue *q)
-{
-}
-
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
 	omap_mbox_disable_irq(mbox, IRQ_TX);
@@ -170,19 +163,22 @@ static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 {
-	struct request *rq;
+	struct omap_mbox_queue *mq = mbox->rxq;
 	mbox_msg_t msg;
-	struct request_queue *q = mbox->rxq->queue;
+	int len;
 
 	while (!mbox_fifo_empty(mbox)) {
-		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-		if (unlikely(!rq))
+		if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
+			omap_mbox_disable_irq(mbox, IRQ_RX);
+			rq_full = true;
 			goto nomem;
+		}
 
 		msg = mbox_fifo_read(mbox);
 
+		len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
+		WARN_ON(len != sizeof(msg));
 
-		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
 			break;
 	}
@@ -207,11 +203,9 @@ static irqreturn_t mbox_interrupt(int irq, void *p)
 }
 
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc *proc,
 					void (*work) (struct work_struct *),
 					void (*tasklet)(unsigned long))
 {
-	struct request_queue *q;
 	struct omap_mbox_queue *mq;
 
 	mq = kzalloc(sizeof(struct omap_mbox_queue), GFP_KERNEL);
@@ -220,11 +214,8 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
 
 	spin_lock_init(&mq->lock);
 
-	q = blk_init_queue(proc, &mq->lock);
-	if (!q)
+	if (kfifo_alloc(&mq->fifo, mbox_kfifo_size, GFP_KERNEL))
 		goto error;
-	q->queuedata = mbox;
-	mq->queue = q;
 
 	if (work)
 		INIT_WORK(&mq->work, work);
@@ -239,7 +230,7 @@ error:
 
 static void mbox_queue_free(struct omap_mbox_queue *q)
 {
-	blk_cleanup_queue(q->queue);
+	kfifo_free(&q->fifo);
 	kfree(q);
 }
 
@@ -248,35 +239,35 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 	int ret = 0;
 	struct omap_mbox_queue *mq;
 
-	if (likely(mbox->ops->startup)) {
-		write_lock(&mboxes_lock);
+	if (mbox->ops->startup) {
+		mutex_lock(&mbox_configured_lock);
 		if (!mbox_configured)
 			ret = mbox->ops->startup(mbox);
 
-		if (unlikely(ret)) {
-			write_unlock(&mboxes_lock);
+		if (ret) {
+			mutex_unlock(&mbox_configured_lock);
 			return ret;
 		}
 		mbox_configured++;
-		write_unlock(&mboxes_lock);
+		mutex_unlock(&mbox_configured_lock);
 	}
 
 	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
-	if (unlikely(ret)) {
+	if (ret) {
 		printk(KERN_ERR
 			"failed to register mailbox interrupt:%d\n", ret);
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
+	mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
+	mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -290,7 +281,7 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
  fail_alloc_txq:
 	free_irq(mbox->irq, mbox);
  fail_request_irq:
-	if (unlikely(mbox->ops->shutdown))
+	if (mbox->ops->shutdown)
 		mbox->ops->shutdown(mbox);
 
 	return ret;
@@ -298,31 +289,20 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 
 static void omap_mbox_fini(struct omap_mbox *mbox)
 {
+	free_irq(mbox->irq, mbox);
+	tasklet_kill(&mbox->txq->tasklet);
+	flush_work(&mbox->rxq->work);
 	mbox_queue_free(mbox->txq);
 	mbox_queue_free(mbox->rxq);
 
-	free_irq(mbox->irq, mbox);
-
-	if (unlikely(mbox->ops->shutdown)) {
-		write_lock(&mboxes_lock);
+	if (mbox->ops->shutdown) {
+		mutex_lock(&mbox_configured_lock);
 		if (mbox_configured > 0)
 			mbox_configured--;
 		if (!mbox_configured)
 			mbox->ops->shutdown(mbox);
-		write_unlock(&mboxes_lock);
-	}
-}
-
-static struct omap_mbox **find_mboxes(const char *name)
-{
-	struct omap_mbox **p;
-
-	for (p = &mboxes; *p; p = &(*p)->next) {
-		if (strcmp((*p)->name, name) == 0)
-			break;
+		mutex_unlock(&mbox_configured_lock);
 	}
-
-	return p;
 }
 
 struct omap_mbox *omap_mbox_get(const char *name)
@@ -330,14 +310,15 @@ struct omap_mbox *omap_mbox_get(const char *name)
 	struct omap_mbox *mbox;
 	int ret;
 
-	read_lock(&mboxes_lock);
-	mbox = *(find_mboxes(name));
-	if (mbox == NULL) {
-		read_unlock(&mboxes_lock);
-		return ERR_PTR(-ENOENT);
-	}
+	if (!mboxes)
+		return ERR_PTR(-EINVAL);
 
-	read_unlock(&mboxes_lock);
+	for (mbox = *mboxes; mbox; mbox++)
+		if (!strcmp(mbox->name, name))
+			break;
+
+	if (!mbox)
+		return ERR_PTR(-ENOENT);
 
 	ret = omap_mbox_startup(mbox);
 	if (ret)
@@ -353,70 +334,77 @@ void omap_mbox_put(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_put);
 
-int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
+static struct class omap_mbox_class = { .name = "mbox", };
+
+int omap_mbox_register(struct device *parent, struct omap_mbox **list)
 {
-	int ret = 0;
-	struct omap_mbox **tmp;
+	int ret;
+	int i;
 
-	if (!mbox)
+	mboxes = list;
+	if (!mboxes)
 		return -EINVAL;
-	if (mbox->next)
-		return -EBUSY;
-
-	write_lock(&mboxes_lock);
-	tmp = find_mboxes(mbox->name);
-	if (*tmp) {
-		ret = -EBUSY;
-		write_unlock(&mboxes_lock);
-		goto err_find;
-	}
-	*tmp = mbox;
-	write_unlock(&mboxes_lock);
 
+	for (i = 0; mboxes[i]; i++) {
+		struct omap_mbox *mbox = mboxes[i];
+		mbox->dev = device_create(&omap_mbox_class,
+				parent, 0, mbox, "%s", mbox->name);
+		if (IS_ERR(mbox->dev)) {
+			ret = PTR_ERR(mbox->dev);
+			goto err_out;
+		}
+	}
 	return 0;
 
-err_find:
+err_out:
+	while (i--)
+		device_unregister(mboxes[i]->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
 
-int omap_mbox_unregister(struct omap_mbox *mbox)
+int omap_mbox_unregister(void)
 {
-	struct omap_mbox **tmp;
-
-	write_lock(&mboxes_lock);
-	tmp = &mboxes;
-	while (*tmp) {
-		if (mbox == *tmp) {
-			*tmp = mbox->next;
-			mbox->next = NULL;
-			write_unlock(&mboxes_lock);
-			return 0;
-		}
-		tmp = &(*tmp)->next;
-	}
-	write_unlock(&mboxes_lock);
+	int i;
+
+	if (!mboxes)
+		return -EINVAL;
 
-	return -EINVAL;
+	for (i = 0; mboxes[i]; i++)
+		device_unregister(mboxes[i]->dev);
+	mboxes = NULL;
+	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
 static int __init omap_mbox_init(void)
 {
+	int err;
+
+	err = class_register(&omap_mbox_class);
+	if (err)
+		return err;
+
 	mboxd = create_workqueue("mboxd");
 	if (!mboxd)
 		return -ENOMEM;
 
+	/* kfifo size sanity check: alignment and minimal size */
+	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
+	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, sizeof(mbox_msg_t));
+
 	return 0;
 }
-module_init(omap_mbox_init);
+subsys_initcall(omap_mbox_init);
 
 static void __exit omap_mbox_exit(void)
 {
 	destroy_workqueue(mboxd);
+	class_unregister(&omap_mbox_class);
 }
 module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
-MODULE_AUTHOR("Toshihiro Kobayashi and Hiroshi DOYU");
+MODULE_AUTHOR("Toshihiro Kobayashi");
+MODULE_AUTHOR("Hiroshi DOYU");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 7e669c9744d..e31496e35b0 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -481,9 +481,9 @@ int omap_st_is_enabled(unsigned int id)
 EXPORT_SYMBOL(omap_st_is_enabled);
 
 /*
- * omap_mcbsp_set_tx_threshold configures how to deal
- * with transmit threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH2 register.
  */
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 {
@@ -498,14 +498,15 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	MCBSP_WRITE(mcbsp, THRSH2, threshold);
+	if (threshold && threshold <= mcbsp->max_tx_thres)
+		MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
 
 /*
- * omap_mcbsp_set_rx_threshold configures how to deal
- * with receive threshold. the threshold value and handler can be
- * configure in here.
+ * omap_mcbsp_set_rx_threshold configures the receive threshold in words.
+ * The threshold parameter is 1 based, and it is converted (threshold - 1)
+ * for the THRSH1 register.
  */
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 {
@@ -520,7 +521,8 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	MCBSP_WRITE(mcbsp, THRSH1, threshold);
+	if (threshold && threshold <= mcbsp->max_rx_thres)
+		MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
 
@@ -560,8 +562,20 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 
-#define MCBSP2_FIFO_SIZE	0x500 /* 1024 + 256 locations */
-#define MCBSP1345_FIFO_SIZE	0x80  /* 128 locations */
+u16 omap_mcbsp_get_fifo_size(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->pdata->buffer_size;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_fifo_size);
+
 /*
  * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
  */
@@ -580,10 +594,7 @@ u16 omap_mcbsp_get_tx_delay(unsigned int id)
 	buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
 
 	/* Number of slots are different in McBSP ports */
-	if (mcbsp->id == 2)
-		return MCBSP2_FIFO_SIZE - buffstat;
-	else
-		return MCBSP1345_FIFO_SIZE - buffstat;
+	return mcbsp->pdata->buffer_size - buffstat;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_tx_delay);
 
@@ -1683,8 +1694,16 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
 	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
 	if (cpu_is_omap34xx()) {
-		mcbsp->max_tx_thres = max_thres(mcbsp);
-		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * Initially configure the maximum thresholds to a safe value.
+		 * The McBSP FIFO usage with these values should not go under
+		 * 16 locations.
+		 * If the whole FIFO without safety buffer is used, than there
+		 * is a possibility that the DMA will be not able to push the
+		 * new data on time, causing channel shifts in runtime.
+		 */
+		mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+		mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
 		/*
 		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
 		 * for mcbsp2 instances.
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 06703635ace..0d4aa0d5876 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -54,7 +54,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+	if (!cpu_class_is_omap1()) {
 		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
 				index);
 		WARN_ON(1);
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 186bca82cfa..e129ce80c53 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -34,11 +34,11 @@ struct omap_opp *l3_opps;
  * Device-driver-originated constraints (via board-*.c files)
  */
 
-void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
 {
 	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
 	 *
 	 * TI CDP code can call constraint_set here.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
 {
 	if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
 	    agent_id != OCP_TARGET_AGENT)) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (r == 0)
@@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
 	 *
 	 * TI CDP code can call constraint_set here on the VDD2 OPP.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+				   long t)
 {
-	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+	if (!req_dev || !dev || t < -1) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
 	 *
 	 * TI CDP code can call constraint_set here.
 	 */
+
+	return 0;
 }
 
-void omap_pm_set_max_sdma_lat(struct device *dev, long t)
+int omap_pm_set_max_sdma_lat(struct device *dev, long t)
 {
 	if (!dev || t < -1) {
-		WARN_ON(1);
-		return;
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
 	};
 
 	if (t == -1)
@@ -139,8 +146,36 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t)
 	 * TI CDP code can call constraint_set here.
 	 */
 
+	return 0;
 }
 
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r)
+{
+	if (!dev || !c || r < 0) {
+		WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
+		return -EINVAL;
+	}
+
+	if (r == 0)
+		pr_debug("OMAP PM: remove min clk rate constraint: "
+			 "dev %s\n", dev_name(dev));
+	else
+		pr_debug("OMAP PM: add min clk rate constraint: "
+			 "dev %s, rate = %ld Hz\n", dev_name(dev), r);
+
+	/*
+	 * Code in a real implementation should keep track of these
+	 * constraints on the clock, and determine the highest minimum
+	 * clock rate.  It should iterate over each OPP and determine
+	 * whether the OPP will result in a clock rate that would
+	 * satisfy this constraint (and any other PM constraint in effect
+	 * at that time).  Once it finds the lowest-voltage OPP that
+	 * meets those conditions, it should switch to it, or return
+	 * an error if the code is not capable of doing so.
+	 */
+
+	return 0;
+}
 
 /*
  * DSP Bridge-specific constraints
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index f899603051a..d2b160942cc 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,7 +1,7 @@
 /*
  * omap_device implementation
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
@@ -90,8 +90,11 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-
-#define OMAP_DEVICE_MAGIC 0xf00dcafe
+/*
+ * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device
+ * obtained via container_of() is in fact a struct omap_device
+ */
+#define OMAP_DEVICE_MAGIC		 0xf00dcafe
 
 /* Private functions */
 
@@ -359,7 +362,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	struct omap_device *od;
 	char *pdev_name2;
 	struct resource *res = NULL;
-	int res_count;
+	int i, res_count;
 	struct omap_hwmod **hwmods;
 
 	if (!ohs || oh_cnt == 0 || !pdev_name)
@@ -404,7 +407,9 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	od->pdev.num_resources = res_count;
 	od->pdev.resource = res;
 
-	platform_device_add_data(&od->pdev, pdata, pdata_len);
+	ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+	if (ret)
+		goto odbs_exit4;
 
 	od->pm_lats = pm_lats;
 	od->pm_lats_cnt = pm_lats_cnt;
@@ -416,6 +421,9 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	else
 		ret = omap_device_register(od);
 
+	for (i = 0; i < oh_cnt; i++)
+		hwmods[i]->od = od;
+
 	if (ret)
 		goto odbs_exit4;
 
@@ -652,6 +660,25 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od)
 	return omap_hwmod_get_pwrdm(od->hwmods[0]);
 }
 
+/**
+ * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base
+ * @od: struct omap_device *
+ *
+ * Return the MPU's virtual address for the base of the hwmod, from
+ * the ioremap() that the hwmod code does.  Only valid if there is one
+ * hwmod associated with this device.  Returns NULL if there are zero
+ * or more than one hwmods associated with this omap_device;
+ * otherwise, passes along the return value from
+ * omap_hwmod_get_mpu_rt_va().
+ */
+void __iomem *omap_device_get_rt_va(struct omap_device *od)
+{
+	if (od->hwmods_cnt != 1)
+		return NULL;
+
+	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
+}
+
 /*
  * Public functions intended for use in omap_device_pm_latency
  * .activate_func and .deactivate_func function pointers
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index d3bf17cd36f..f3570884883 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -22,524 +22,13 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/usb/otg.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-
-#include <plat/control.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 
-#ifdef CONFIG_ARCH_OMAP1
-
-#define INT_USB_IRQ_GEN		IH2_BASE + 20
-#define INT_USB_IRQ_NISO	IH2_BASE + 30
-#define INT_USB_IRQ_ISO		IH2_BASE + 29
-#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
-#define INT_USB_IRQ_OTG		IH2_BASE + 8
-
-#else
-
-#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
-#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
-#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
-#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
-#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
-
-#endif
-
-
-/* These routines should handle the standard chip-specific modes
- * for usb0/1/2 ports, covering basic mux and transceiver setup.
- *
- * Some board-*.c files will need to set up additional mux options,
- * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
- */
-
-/* TESTED ON:
- *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
- *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
- *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
- *  - 1510 Innovator UDC with bundled usb0 cable
- *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
- *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
- *  - 1710 custom development board using alternate pin group
- *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
- */
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
-
-static void omap2_usb_devconf_clear(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb_devconf_set(u8 port, u32 mask)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(port, mask);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_disable_5pinbitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static void omap2_usb2_enable_5pinunitll(void)
-{
-	u32 r;
-
-	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
-	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
-}
-
-static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_is_omap24xx())
-		omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
-
-	if (nwires == 0) {
-		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
-			u32 l;
-
-			/* pulldown D+/D- */
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		return 0;
-	}
-
-	if (is_device) {
-		if (cpu_is_omap24xx())
-			omap_cfg_reg(J20_24XX_USB0_PUEN);
-		else if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
-	}
-
-	/* internal transceiver (unavailable on 17xx, 24xx) */
-	if (!cpu_class_is_omap2() && nwires == 2) {
-		u32 l;
-
-		// omap_cfg_reg(P9_USB_DP);
-		// omap_cfg_reg(R8_USB_DM);
-
-		if (cpu_is_omap15xx()) {
-			/* This works on 1510-Innovator */
-			return 0;
-		}
-
-		/* NOTES:
-		 *  - peripheral should configure VBUS detection!
-		 *  - only peripherals may use the internal D+/D- pulldowns
-		 *  - OTG support on this port not yet written
-		 */
-
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-
-		return 3 << 16;
-	}
-
-	/* alternate pin config, external transceiver */
-	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
-		return 0;
-	}
-
-	if (cpu_is_omap24xx()) {
-		omap_cfg_reg(K18_24XX_USB0_DAT);
-		omap_cfg_reg(K19_24XX_USB0_TXEN);
-		omap_cfg_reg(J14_24XX_USB0_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(J18_24XX_USB0_RCV);
-	} else {
-		omap_cfg_reg(V6_USB0_TXD);
-		omap_cfg_reg(W9_USB0_TXEN);
-		omap_cfg_reg(W5_USB0_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(Y5_USB0_RCV);
-	}
-
-	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
-	 * may be able to use I2C requests to set those bits along
-	 * with VBUS switching and overcurrent detection.
-	 */
-
-	if (cpu_class_is_omap1() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	switch (nwires) {
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(0, USB_BIDIR);
-		break;
-	case 6:
-		syscon1 = 3;
-		if (cpu_is_omap24xx()) {
-			omap_cfg_reg(J19_24XX_USB0_VP);
-			omap_cfg_reg(K20_24XX_USB0_VM);
-			omap2_usb_devconf_set(0, USB_UNIDIR);
-		} else {
-			u32 l;
-
-			omap_cfg_reg(AA9_USB0_VP);
-			omap_cfg_reg(R9_USB0_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			0, nwires);
-	}
-	return syscon1 << 16;
-}
-
-static u32 __init omap_usb1_init(unsigned nwires)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB1_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-	if (cpu_is_omap24xx())
-		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
-
-	if (nwires == 0)
-		return 0;
-
-	/* external transceiver */
-	if (cpu_class_is_omap1()) {
-		omap_cfg_reg(USB1_TXD);
-		omap_cfg_reg(USB1_TXEN);
-		if (nwires != 3)
-			omap_cfg_reg(USB1_RCV);
-	}
-
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB1_SEO);
-		omap_cfg_reg(USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
-		omap_cfg_reg(W13_1610_USB1_SE0);
-		omap_cfg_reg(R13_1610_USB1_SPEED);
-		// SUSP
-	} else if (cpu_is_omap1710()) {
-		omap_cfg_reg(R13_1710_USB1_SE0);
-		// SUSP
-	} else if (cpu_is_omap24xx()) {
-		/* NOTE:  board-specific code must set up pin muxing for usb1,
-		 * since each signal could come out on either of two balls.
-		 */
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-
-	switch (nwires) {
-	case 2:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(1, USB_BIDIR);
-		break;
-	case 6:
-		if (cpu_is_omap24xx())
-			goto bad;
-		syscon1 = 3;
-		omap_cfg_reg(USB1_VP);
-		omap_cfg_reg(USB1_VM);
-		if (!cpu_is_omap15xx()) {
-			u32 l;
-
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB1_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			1, nwires);
-	}
-	return syscon1 << 20;
-}
-
-static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	u32	syscon1 = 0;
-
-	if (cpu_is_omap24xx()) {
-		omap2_usb2_disable_5pinbitll();
-		alt_pingroup = 0;
-	}
-
-	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
-	if (alt_pingroup || nwires == 0)
-		return 0;
-
-	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6) {
-		u32 l;
-
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~CONF_USB2_UNI_R;
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
-	}
-
-	/* external transceiver */
-	if (cpu_is_omap15xx()) {
-		omap_cfg_reg(USB2_TXD);
-		omap_cfg_reg(USB2_TXEN);
-		omap_cfg_reg(USB2_SEO);
-		if (nwires != 3)
-			omap_cfg_reg(USB2_RCV);
-		/* there is no USB2_SPEED */
-	} else if (cpu_is_omap16xx()) {
-		omap_cfg_reg(V6_USB2_TXD);
-		omap_cfg_reg(W9_USB2_TXEN);
-		omap_cfg_reg(W5_USB2_SE0);
-		if (nwires != 3)
-			omap_cfg_reg(Y5_USB2_RCV);
-		// FIXME omap_cfg_reg(USB2_SPEED);
-	} else if (cpu_is_omap24xx()) {
-		omap_cfg_reg(Y11_24XX_USB2_DAT);
-		omap_cfg_reg(AA10_24XX_USB2_SE0);
-		if (nwires > 2)
-			omap_cfg_reg(AA12_24XX_USB2_TXEN);
-		if (nwires > 3)
-			omap_cfg_reg(AA6_24XX_USB2_RCV);
-	} else {
-		pr_debug("usb%d cpu unrecognized\n", 1);
-		return 0;
-	}
-	// if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
-
-	switch (nwires) {
-	case 2:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM
-		 */
-		syscon1 = 1;
-		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
-		break;
-	case 3:
-		syscon1 = 2;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 4:
-		syscon1 = 1;
-		if (cpu_is_omap24xx())
-			omap2_usb_devconf_set(2, USB_BIDIR);
-		break;
-	case 5:
-		if (!cpu_is_omap24xx())
-			goto bad;
-		omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
-		/* NOTE: board-specific code must override this setting if
-		 * this TLL link is not using DP/DM.  Something must also
-		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
-		 */
-		syscon1 = 3;
-		omap2_usb2_enable_5pinunitll();
-		break;
-	case 6:
-		if (cpu_is_omap24xx())
-			goto bad;
-		syscon1 = 3;
-		if (cpu_is_omap15xx()) {
-			omap_cfg_reg(USB2_VP);
-			omap_cfg_reg(USB2_VM);
-		} else {
-			u32 l;
-
-			omap_cfg_reg(AA9_USB2_VP);
-			omap_cfg_reg(R9_USB2_VM);
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l |= CONF_USB2_UNI_R;
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
-		break;
-	default:
-bad:
-		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
-			2, nwires);
-	}
-	return syscon1 << 24;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-
-static struct resource udc_resources[] = {
-	/* order is significant! */
-	{		/* registers */
-		.start		= UDC_BASE,
-		.end		= UDC_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {		/* general IRQ */
-		.start		= INT_USB_IRQ_GEN,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* PIO IRQ */
-		.start		= INT_USB_IRQ_NISO,
-		.flags		= IORESOURCE_IRQ,
-	}, {		/* SOF IRQ */
-		.start		= INT_USB_IRQ_ISO,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 udc_dmamask = ~(u32)0;
-
-static struct platform_device udc_device = {
-	.name		= "omap_udc",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(udc_resources),
-	.resource	= udc_resources,
-};
-
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
-
-static struct resource ohci_resources[] = {
-	{
-		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_IRQ_HGEN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ohci_device = {
-	.name			= "ohci",
-	.id			= -1,
-	.dev = {
-		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(ohci_resources),
-	.resource		= ohci_resources,
-};
-
-#endif
-
-#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
-
-static struct resource otg_resources[] = {
-	/* order is significant! */
-	{
-		.start		= OTG_BASE,
-		.end		= OTG_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= INT_USB_IRQ_OTG,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device otg_device = {
-	.name		= "omap_otg",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-	.resource	= otg_resources,
-};
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-// FIXME correct answer depends on hmc_mode,
-// as does (on omap1) any nonzero value for config->otg port number
-#ifdef	CONFIG_USB_GADGET_OMAP
-#define	is_usb0_device(config)	1
-#else
-#define	is_usb0_device(config)	0
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #ifdef	CONFIG_ARCH_OMAP_OTG
 
 void __init
@@ -560,9 +49,9 @@ omap_otg_init(struct omap_usb_config *config)
 	/* pin muxing and transceiver pinouts */
 	if (config->pins[0] > 2)	/* alt pingroup 2 */
 		alt_pingroup = 1;
-	syscon |= omap_usb0_init(config->pins[0], is_usb0_device(config));
-	syscon |= omap_usb1_init(config->pins[1]);
-	syscon |= omap_usb2_init(config->pins[2], alt_pingroup);
+	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+	syscon |= config->usb1_init(config->pins[1]);
+	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
 	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
 	omap_writel(syscon, OTG_SYSCON_1);
 
@@ -610,15 +99,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_GADGET_OMAP
 	if (config->otg || config->register_dev) {
+		struct platform_device *udc_device = config->udc_device;
+
 		syscon &= ~DEV_IDLE_EN;
-		udc_device.dev.platform_data = config;
-		/* IRQ numbers for omap7xx */
-		if(cpu_is_omap7xx()) {
-			udc_resources[1].start = INT_7XX_USB_GENI;
-			udc_resources[2].start = INT_7XX_USB_NON_ISO;
-			udc_resources[3].start = INT_7XX_USB_ISO;
-		}
-		status = platform_device_register(&udc_device);
+		udc_device->dev.platform_data = config;
+		status = platform_device_register(udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
 	}
@@ -626,11 +111,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	if (config->otg || config->register_host) {
+		struct platform_device *ohci_device = config->ohci_device;
+
 		syscon &= ~HST_IDLE_EN;
-		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap7xx())
-			ohci_resources[1].start = INT_7XX_USB_HHC_1;
-		status = platform_device_register(&ohci_device);
+		ohci_device->dev.platform_data = config;
+		status = platform_device_register(ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 	}
@@ -638,11 +123,11 @@ omap_otg_init(struct omap_usb_config *config)
 
 #ifdef	CONFIG_USB_OTG
 	if (config->otg) {
+		struct platform_device *otg_device = config->otg_device;
+
 		syscon &= ~OTG_IDLE_EN;
-		otg_device.dev.platform_data = config;
-		if (cpu_is_omap7xx())
-			otg_resources[1].start = INT_7XX_USB_OTG;
-		status = platform_device_register(&otg_device);
+		otg_device->dev.platform_data = config;
+		status = platform_device_register(otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
 	}
@@ -654,102 +139,5 @@ omap_otg_init(struct omap_usb_config *config)
 }
 
 #else
-static inline void omap_otg_init(struct omap_usb_config *config) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef	CONFIG_ARCH_OMAP15XX
-
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB		(1 << 13)
-#define DPLL_PLL_ENABLE		(1 << 4)
-#define DPLL_LOCK		(1 << 0)
-
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH	(1 << 0)
-
-
-static void __init omap_1510_usb_init(struct omap_usb_config *config)
-{
-	unsigned int val;
-	u16 w;
-
-	omap_usb0_init(config->pins[0], is_usb0_device(config));
-	omap_usb1_init(config->pins[1]);
-	omap_usb2_init(config->pins[2], 0);
-
-	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
-	val |= (config->hmc_mode << 1);
-	omap_writel(val, MOD_CONF_CTRL_0);
-
-	printk("USB: hmc %d", config->hmc_mode);
-	if (config->pins[0])
-		printk(", usb0 %d wires%s", config->pins[0],
-			is_usb0_device(config) ? " (dev)" : "");
-	if (config->pins[1])
-		printk(", usb1 %d wires", config->pins[1]);
-	if (config->pins[2])
-		printk(", usb2 %d wires", config->pins[2]);
-	printk("\n");
-
-	/* use DPLL for 48 MHz function clock */
-	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
-			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
-
-	w = omap_readw(ULPD_APLL_CTRL);
-	w &= ~APLL_NDPLL_SWITCH;
-	omap_writew(w, ULPD_APLL_CTRL);
-
-	w = omap_readw(ULPD_DPLL_CTRL);
-	w |= DPLL_IOB | DPLL_PLL_ENABLE;
-	omap_writew(w, ULPD_DPLL_CTRL);
-
-	w = omap_readw(ULPD_SOFT_REQ);
-	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
-	omap_writew(w, ULPD_SOFT_REQ);
-
-	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
-		cpu_relax();
-
-#ifdef	CONFIG_USB_GADGET_OMAP
-	if (config->register_dev) {
-		int status;
-
-		udc_device.dev.platform_data = config;
-		status = platform_device_register(&udc_device);
-		if (status)
-			pr_debug("can't register UDC device, %d\n", status);
-		/* udc driver gates 48MHz by D+ pullup */
-	}
-#endif
-
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	if (config->register_host) {
-		int status;
-
-		ohci_device.dev.platform_data = config;
-		status = platform_device_register(&ohci_device);
-		if (status)
-			pr_debug("can't register OHCI device, %d\n", status);
-		/* hcd explicitly gates 48MHz */
-	}
-#endif
-}
-
-#else
-static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+void omap_otg_init(struct omap_usb_config *config) {}
 #endif
-
-/*-------------------------------------------------------------------------*/
-
-void __init omap_usb_init(struct omap_usb_config *pdata)
-{
-	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
-		omap_otg_init(pdata);
-	else if (cpu_is_omap15xx())
-		omap_1510_usb_init(pdata);
-	else
-		printk(KERN_ERR "USB: No init for your chip yet\n");
-}
-
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
new file mode 100644
index 00000000000..9cf1f781329
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/audio.h
@@ -0,0 +1,11 @@
+#ifndef __PLAT_AUDIO_H
+#define __PLAT_AUDIO_H
+
+#include <linux/mbus.h>
+
+struct kirkwood_asoc_platform_data {
+	u32 tclk;
+	struct mbus_dram_target_info *dram;
+	int burst;
+};
+#endif
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index f2b31933318..f51572772e2 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -45,9 +45,6 @@ config GENERIC_IRQ_PROBE
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index ead8a75203a..22fb66590dc 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -13,7 +13,7 @@ KBUILD_DEFCONFIG	:= atstk1002_defconfig
 
 KBUILD_CFLAGS	+= -pipe -fno-builtin -mno-pic
 KBUILD_AFLAGS	+= -mrelax -mno-pic
-CFLAGS_MODULE	+= -mno-relax
+KBUILD_CFLAGS_MODULE += -mno-relax
 LDFLAGS_vmlinux	+= --relax
 
 cpuflags-$(CONFIG_PLATFORM_AT32AP)	+= -march=ap
diff --git a/arch/avr32/include/asm/local64.h b/arch/avr32/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/avr32/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c
index b61d86d3deb..f7040a1e399 100644
--- a/arch/avr32/mm/fault.c
+++ b/arch/avr32/mm/fault.c
@@ -132,7 +132,6 @@ good_area:
 	 * sure we exit gracefully rather than endlessly redo the
 	 * fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -211,15 +210,10 @@ no_context:
 	 */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: Killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	pagefault_out_of_memory();
+	if (!user_mode(regs))
+		goto no_context;
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f66294b4f9d..5a3152b75cd 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -25,6 +25,8 @@ config BLACKFIN
 	def_bool y
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
@@ -32,6 +34,7 @@ config BLACKFIN
 	select HAVE_KERNEL_GZIP if RAMKERNEL
 	select HAVE_KERNEL_BZIP2 if RAMKERNEL
 	select HAVE_KERNEL_LZMA if RAMKERNEL
+	select HAVE_KERNEL_LZO if RAMKERNEL
 	select HAVE_OPROFILE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
@@ -328,11 +331,6 @@ config BF53x
 	depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
 	default y
 
-config MEM_GENERIC_BOARD
-	bool
-	depends on GENERIC_BOARD
-	default y
-
 config MEM_MT48LC64M4A2FB_7E
 	bool
 	depends on (BFIN533_STAMP)
@@ -614,9 +612,6 @@ comment "Kernel Timer/Scheduler"
 
 source kernel/Kconfig.hz
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
 	default y
@@ -853,6 +848,18 @@ config CPLB_SWITCH_TAB_L1
 	  If enabled, the CPLB Switch Tables are linked
 	  into L1 data memory. (less latency)
 
+config CACHE_FLUSH_L1
+	bool "Locate cache flush funcs in L1 Inst Memory"
+	default y
+	help
+	  If enabled, the Blackfin cache flushing functions are linked
+	  into L1 instruction memory.
+
+	  Note that this might be required to address anomalies, but
+	  these functions are pretty small, so it shouldn't be too bad.
+	  If you are using a processor affected by an anomaly, the build
+	  system will double check for you and prevent it.
+
 config APP_STACK_L1
 	bool "Support locating application stack in L1 Scratch Memory"
 	default y
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 5a97a31d4bb..3e65b0ffe08 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -18,8 +18,8 @@ ifeq ($(CONFIG_ROMKERNEL),y)
 KBUILD_CFLAGS           += -mlong-calls
 endif
 KBUILD_AFLAGS           += $(call cc-option,-mno-fdpic)
-CFLAGS_MODULE    += -mlong-calls
-LDFLAGS_MODULE   += -m elf32bfin
+KBUILD_CFLAGS_MODULE    += -mlong-calls
+KBUILD_LDFLAGS_MODULE   += -m elf32bfin
 KALLSYMS         += --symbol-prefix=_
 
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
@@ -140,7 +140,7 @@ archclean:
 
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip
 PHONY += $(BOOT_TARGETS) install
 KBUILD_IMAGE := $(boot)/vmImage
 
@@ -158,6 +158,7 @@ define archhelp
   echo  '  vmImage.bz2     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
   echo  '* vmImage.gz      - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
   echo  '  vmImage.lzma    - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
+  echo  '  vmImage.lzo     - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzo)'
   echo  '  vmImage.xip     - XIP Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.xip)'
   echo  '  install         - Install kernel using'
   echo  '                     (your) ~/bin/$(INSTALLKERNEL) or'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index d1b3d6051fd..13d2dbd658e 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,8 +8,8 @@
 
 MKIMAGE := $(srctree)/scripts/mkuboot.sh
 
-targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.xip
-extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xip
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma vmImage.lzo vmImage.xip
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.xip
 
 UIMAGE_OPTS-y :=
 UIMAGE_OPTS-$(CONFIG_RAMKERNEL) += -a $(CONFIG_BOOT_LOAD)
@@ -33,6 +33,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzo)
+
 # The mkimage tool wants 64bytes prepended to the image
 quiet_cmd_mk_bin_xip = BIN     $@
       cmd_mk_bin_xip = ( printf '%64s' | tr ' ' '\377' ; cat $< ) > $@
@@ -51,6 +54,9 @@ $(obj)/vmImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/vmImage.lzo: $(obj)/vmlinux.bin.lzo
+	$(call if_changed,uimage,lzo)
+
 $(obj)/vmImage.xip: $(obj)/vmlinux.bin.xip
 	$(call if_changed,uimage,none)
 
@@ -58,6 +64,7 @@ suffix-y                      := bin
 suffix-$(CONFIG_KERNEL_GZIP)  := gz
 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
 suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+suffix-$(CONFIG_KERNEL_LZO)   := lzo
 suffix-$(CONFIG_ROMKERNEL)    := xip
 
 $(obj)/vmImage: $(obj)/vmImage.$(suffix-y)
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index cf7c9bc94f1..01865033f70 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34.1
+# Sun Aug  1 22:52:24 2010
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -34,9 +36,11 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_HAVE_KERNEL_GZIP=y
 CONFIG_HAVE_KERNEL_BZIP2=y
 CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +53,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +61,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +69,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +102,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +111,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +128,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -185,6 +218,7 @@ CONFIG_BF_REV_0_0=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_BF51x=y
 CONFIG_BFIN518F_EZBRD=y
+# CONFIG_BFIN518F_TCM is not set
 
 #
 # BF518 Specific Configuration
@@ -201,6 +235,11 @@ CONFIG_BF518_UART1_PORTF=y
 # CONFIG_BF518_UART1_PORTG is not set
 
 #
+# Hysteresis/schmitt Trigger Control
+#
+# CONFIG_BFIN_HYSTERESIS_CONTROL is not set
+
+#
 # Interrupt Priority Assignment
 #
 
@@ -288,8 +327,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -320,12 +367,17 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
+# CONFIG_EXCEPTION_L1_SCRATCH is not set
 
 #
 # Speed Optimizations
@@ -425,7 +477,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -486,6 +537,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
+# CONFIG_SIR_BFIN_DMA is not set
+# CONFIG_SIR_BFIN_PIO is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
@@ -596,6 +649,10 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -609,6 +666,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -619,12 +679,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -656,6 +718,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -663,7 +726,6 @@ CONFIG_MII=y
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
 CONFIG_BFIN_MAC_USE_HWSTAMP=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
@@ -702,32 +764,7 @@ CONFIG_BFIN_MAC_USE_HWSTAMP=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT is not set
 
 #
 # Hardware I/O ports
@@ -745,11 +782,7 @@ CONFIG_BFIN_DMA_INTERFACE=m
 # CONFIG_BFIN_SPI_ADC is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TWI_LCD is not set
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_BFIN_JTAG_COMM=m
 # CONFIG_SERIAL_NONSTANDARD is not set
@@ -773,6 +806,7 @@ CONFIG_SERIAL_BFIN_UART0=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -801,6 +835,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -813,16 +848,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -835,6 +863,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -854,10 +884,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -900,20 +932,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -929,13 +966,7 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -953,10 +984,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
-CONFIG_SDH_BFIN=m
+CONFIG_SDH_BFIN=y
 CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -989,6 +1018,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1017,7 +1047,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1050,7 +1082,6 @@ CONFIG_EXT2_FS=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1102,6 +1133,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1126,6 +1158,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1204,6 +1237,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1227,17 +1262,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1264,6 +1302,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1273,8 +1312,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 31c2a6db6ec..d543f95f55e 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -232,6 +263,7 @@ CONFIG_BF52x=y
 # CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 CONFIG_BFIN526_EZBRD=y
+# CONFIG_BFIN527_AD7160EVAL is not set
 
 #
 # BF527 Specific Configuration
@@ -294,8 +326,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -431,7 +475,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -614,6 +657,10 @@ CONFIG_MTD_NAND_IDS=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -628,6 +675,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -644,6 +694,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -705,6 +756,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -712,7 +764,6 @@ CONFIG_MII=y
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
@@ -747,6 +798,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -762,6 +814,7 @@ CONFIG_BFIN_MAC_RMII=y
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -780,6 +833,7 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
@@ -787,11 +841,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 # CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -837,6 +890,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -865,6 +919,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -878,16 +933,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -900,6 +948,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -919,10 +969,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -960,10 +1012,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -975,6 +1028,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1000,6 +1054,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1013,6 +1068,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -1038,20 +1094,25 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1087,6 +1148,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1102,14 +1164,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1130,7 +1197,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
@@ -1214,7 +1280,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1227,7 +1292,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1268,6 +1332,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1296,7 +1361,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1329,7 +1396,6 @@ CONFIG_EXT2_FS=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1393,6 +1459,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1417,6 +1484,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1495,6 +1563,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1518,17 +1588,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1555,6 +1626,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1564,9 +1636,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
index d2dfcb0e7ce..c59670901b8 100644
--- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -232,6 +263,7 @@ CONFIG_BF52x=y
 CONFIG_BFIN527_EZKIT_V2=y
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 # CONFIG_BFIN526_EZBRD is not set
+# CONFIG_BFIN527_AD7160EVAL is not set
 
 #
 # BF527 Specific Configuration
@@ -294,8 +326,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -431,7 +475,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -654,6 +697,10 @@ CONFIG_MTD_NAND_IDS=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -668,6 +715,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -684,6 +734,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -745,6 +796,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -753,7 +805,6 @@ CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
@@ -788,6 +839,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -803,6 +855,7 @@ CONFIG_BFIN_MAC_RMII=y
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -836,8 +889,11 @@ CONFIG_KEYBOARD_ADP5520=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
-CONFIG_TOUCHSCREEN_AD7879_I2C=y
 CONFIG_TOUCHSCREEN_AD7879=y
+CONFIG_TOUCHSCREEN_AD7879_I2C=y
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7160 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -855,6 +911,7 @@ CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
@@ -862,11 +919,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 # CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -912,6 +968,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -940,6 +997,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -953,16 +1011,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -975,6 +1026,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -994,10 +1047,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1046,21 +1101,26 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 CONFIG_PMIC_ADP5520=y
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1101,6 +1161,7 @@ CONFIG_FB_BFIN_LQ035Q1=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
@@ -1110,6 +1171,7 @@ CONFIG_LCD_CLASS_DEVICE=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
 CONFIG_BACKLIGHT_GENERIC=m
 # CONFIG_BACKLIGHT_ADP5520 is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
 # CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
@@ -1158,13 +1220,9 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
@@ -1173,6 +1231,10 @@ CONFIG_SND_BF5XX_SOC_SSM2602=m
 # CONFIG_SND_BF5XX_SOC_AD73311 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
+# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
 # CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
@@ -1203,6 +1265,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1218,14 +1281,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1246,7 +1314,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
@@ -1330,7 +1397,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1343,7 +1409,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1366,11 +1431,8 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_ADP5520=y
-
-#
-# LED Triggers
-#
 # CONFIG_LEDS_TRIGGERS is not set
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
@@ -1401,6 +1463,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1429,7 +1492,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1462,7 +1527,6 @@ CONFIG_EXT2_FS=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1527,6 +1591,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1551,6 +1616,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1629,6 +1695,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1652,17 +1720,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1689,6 +1758,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1698,9 +1768,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index edbb44d26bb..0de212e1e9b 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -232,6 +263,7 @@ CONFIG_BFIN527_EZKIT=y
 # CONFIG_BFIN527_EZKIT_V2 is not set
 # CONFIG_BFIN527_BLUETECHNIX_CM is not set
 # CONFIG_BFIN526_EZBRD is not set
+# CONFIG_BFIN527_AD7160EVAL is not set
 
 #
 # BF527 Specific Configuration
@@ -294,8 +326,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -326,12 +366,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -431,7 +475,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -654,6 +697,10 @@ CONFIG_MTD_NAND_IDS=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -668,6 +715,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -684,6 +734,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -745,6 +796,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -753,7 +805,6 @@ CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
-CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
@@ -788,6 +839,7 @@ CONFIG_BFIN_MAC_RMII=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -803,6 +855,7 @@ CONFIG_BFIN_MAC_RMII=y
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -821,6 +874,7 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
@@ -828,11 +882,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 # CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -878,6 +931,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -906,6 +960,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -919,16 +974,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -941,6 +989,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -960,10 +1010,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1011,21 +1063,26 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1066,6 +1123,7 @@ CONFIG_FB_BFIN_T350MCQB=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 CONFIG_LCD_LTV350QV=m
 # CONFIG_LCD_ILI9320 is not set
@@ -1074,6 +1132,7 @@ CONFIG_LCD_LTV350QV=m
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
 CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8860 is not set
 # CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
@@ -1122,13 +1181,9 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
@@ -1137,6 +1192,10 @@ CONFIG_SND_BF5XX_SOC_SSM2602=m
 # CONFIG_SND_BF5XX_SOC_AD73311 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
+# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
 # CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
 CONFIG_SND_BF5XX_MMAP_SUPPORT=y
@@ -1167,6 +1226,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1182,14 +1242,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1210,7 +1275,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
@@ -1292,7 +1356,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1305,7 +1368,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1346,6 +1408,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1374,7 +1437,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1407,7 +1472,6 @@ CONFIG_EXT2_FS=m
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1472,6 +1536,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1496,6 +1561,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1574,6 +1640,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1597,17 +1665,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1634,6 +1703,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1643,9 +1713,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 0b13d5836a4..f096012c8d9 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -122,14 +125,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -254,8 +284,16 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
@@ -287,12 +325,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -385,10 +427,10 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Possible Suspend Mem / Hibernate Wake-Up Sources
@@ -404,7 +446,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -608,6 +649,10 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -617,7 +662,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -631,6 +678,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -687,6 +735,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=m
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -744,6 +793,7 @@ CONFIG_SERIAL_BFIN_UART0=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -765,6 +815,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -784,6 +836,7 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
@@ -831,6 +884,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -898,7 +952,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -929,7 +985,6 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -988,6 +1043,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1012,6 +1068,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1113,17 +1170,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1150,6 +1208,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1159,8 +1218,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index c3fe6e5b612..f65b5e21139 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -254,8 +285,16 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
@@ -287,12 +326,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -385,10 +428,10 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Possible Suspend Mem / Hibernate Wake-Up Sources
@@ -404,7 +447,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -612,6 +654,10 @@ CONFIG_MTD_BFIN_ASYNC=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -625,6 +671,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -641,6 +690,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -697,6 +747,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -715,11 +766,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -760,6 +811,7 @@ CONFIG_SERIAL_BFIN_UART0=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -781,9 +833,10 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
-# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -796,16 +849,9 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -818,6 +864,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -837,10 +885,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -889,12 +939,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -977,22 +1026,18 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-CONFIG_SND_BFIN_SPORT=0
-CONFIG_SND_BFIN_AD73322=m
-CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
-CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
-CONFIG_SND_BFIN_AD73322_RESET=12
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+CONFIG_SND_AD7XXXX_SELECT=0
 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
+# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
 CONFIG_SND_BFIN_AD73311_SE=4
 # CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
@@ -1051,6 +1096,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1079,7 +1125,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1111,7 +1159,6 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1170,6 +1217,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1194,6 +1242,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1272,6 +1321,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1295,17 +1346,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1332,6 +1384,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1341,8 +1394,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 7596cf7673f..50cb9342f01 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -230,7 +261,7 @@ CONFIG_BFIN537_STAMP=y
 # Priority
 #
 CONFIG_IRQ_DMA_ERROR=7
-CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_ERROR=11
 CONFIG_IRQ_CAN_RX=11
 CONFIG_IRQ_CAN_TX=11
 CONFIG_IRQ_PROG_INTA=12
@@ -262,8 +293,16 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
@@ -295,12 +334,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -393,10 +436,10 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
 # Possible Suspend Mem / Hibernate Wake-Up Sources
@@ -413,7 +456,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -482,13 +524,9 @@ CONFIG_CAN_BCM=m
 # CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
 # CONFIG_CAN_CALC_BITTIMING is not set
+# CONFIG_CAN_MCP251X is not set
 CONFIG_CAN_BFIN=m
 # CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
@@ -638,6 +676,10 @@ CONFIG_MTD_PHYSMAP=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -651,6 +693,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -667,6 +712,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -698,6 +744,7 @@ CONFIG_SMSC_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -706,7 +753,6 @@ CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
-# CONFIG_BFIN_MAC_RMII is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
@@ -747,6 +793,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -765,11 +812,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -811,6 +858,7 @@ CONFIG_SERIAL_BFIN_UART0=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -837,6 +885,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -849,16 +898,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -871,6 +913,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -890,10 +934,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -942,12 +988,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -998,6 +1043,7 @@ CONFIG_ADV7393_1XMEM=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
@@ -1006,6 +1052,7 @@ CONFIG_LCD_CLASS_DEVICE=m
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=m
 CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_BACKLIGHT_ADP8860 is not set
 # CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
@@ -1042,22 +1089,18 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-CONFIG_SND_BFIN_SPORT=0
-CONFIG_SND_BFIN_AD73322=m
-CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
-CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
-CONFIG_SND_BFIN_AD73322_RESET=12
 CONFIG_SND_SOC=m
 CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_BF5XX_I2S=m
 # CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_AD73311=m
+CONFIG_SND_AD7XXXX_SELECT=0
 # CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
 # CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1361 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1381 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1373 is not set
+# CONFIG_SND_BF5XX_SOC_ADAV80X is not set
 CONFIG_SND_BFIN_AD73311_SE=4
 # CONFIG_SND_BF5XX_TDM is not set
 CONFIG_SND_BF5XX_AC97=m
@@ -1116,6 +1159,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1144,7 +1188,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1176,7 +1222,6 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1235,6 +1280,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1259,6 +1305,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1337,6 +1384,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1360,17 +1409,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1397,6 +1447,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1406,8 +1457,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index bc1871d89fd..247cfae35af 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -106,6 +109,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -122,14 +126,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -272,8 +303,16 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
@@ -305,12 +344,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -410,7 +453,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -479,13 +521,9 @@ CONFIG_CAN_BCM=m
 # CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
 # CONFIG_CAN_CALC_BITTIMING is not set
+# CONFIG_CAN_MCP251X is not set
 CONFIG_CAN_BFIN=m
 # CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 CONFIG_IRDA=m
 
@@ -641,6 +679,10 @@ CONFIG_MTD_NAND_IDS=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -656,6 +698,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -687,6 +730,7 @@ CONFIG_SMSC_PHY=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -731,6 +775,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -750,9 +795,11 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_AD7877 is not set
+CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 CONFIG_TOUCHSCREEN_AD7879_SPI=y
-CONFIG_TOUCHSCREEN_AD7879=y
+# CONFIG_TOUCHSCREEN_AD7160 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -768,11 +815,11 @@ CONFIG_TOUCHSCREEN_AD7879=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -817,6 +864,7 @@ CONFIG_SERIAL_BFIN_UART2=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -843,6 +891,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -855,16 +904,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -877,6 +919,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -896,10 +940,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -947,12 +993,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1040,6 +1085,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1068,7 +1114,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1100,7 +1148,6 @@ CONFIG_RTC_DRV_BFIN=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1159,6 +1206,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1183,6 +1231,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1261,6 +1310,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1284,17 +1335,18 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1321,6 +1373,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1330,8 +1383,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index ca309cfc6ac..baca6660cf0 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -107,6 +110,7 @@ CONFIG_SLOW_WORK=y
 # CONFIG_SLOW_WORK_DEBUG is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -123,14 +127,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -330,8 +361,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -362,12 +401,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 # CONFIG_MEMSET_L1 is not set
 # CONFIG_MEMCPY_L1 is not set
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 # CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -472,7 +515,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -540,6 +582,7 @@ CONFIG_CAN_BCM=m
 # CONFIG_CAN_VCAN is not set
 CONFIG_CAN_DEV=m
 # CONFIG_CAN_CALC_BITTIMING is not set
+# CONFIG_CAN_MCP251X is not set
 CONFIG_CAN_BFIN=m
 # CONFIG_CAN_SJA1000 is not set
 
@@ -595,9 +638,14 @@ CONFIG_SIR_BFIN_DMA=y
 # CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
 CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -700,8 +748,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
-CONFIG_MTD_NAND_BF5XX_HWECC=y
-# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
+# CONFIG_MTD_NAND_BF5XX_HWECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -721,6 +768,10 @@ CONFIG_MTD_NAND_BF5XX_HWECC=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -735,6 +786,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -745,12 +799,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -819,6 +875,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -844,14 +901,6 @@ CONFIG_SMSC911X=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
 
@@ -867,6 +916,7 @@ CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -882,6 +932,7 @@ CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
 CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -914,9 +965,9 @@ CONFIG_KEYBOARD_BFIN=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=m
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7160 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -934,6 +985,7 @@ CONFIG_TOUCHSCREEN_AD7877=m
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
@@ -941,11 +993,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_PCF8574 is not set
 # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 # CONFIG_INPUT_BFIN_ROTARY is not set
-# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_PCF8574 is not set
 
 #
 # Hardware I/O ports
@@ -993,6 +1044,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -1021,6 +1073,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1034,16 +1087,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1056,6 +1102,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1075,10 +1123,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1126,21 +1176,26 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1239,13 +1294,9 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_AC97_BUS=y
@@ -1279,6 +1330,7 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1294,14 +1346,19 @@ CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
@@ -1322,7 +1379,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
@@ -1406,7 +1462,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1419,7 +1474,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1444,11 +1498,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 CONFIG_SDH_BFIN=y
-# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1480,6 +1532,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1508,7 +1561,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1609,6 +1664,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1638,6 +1694,7 @@ CONFIG_SUNRPC=m
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1721,6 +1778,8 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -1744,12 +1803,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1778,6 +1841,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1785,7 +1849,11 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
index 6a776ce75e9..d5ceeab7a90 100644
--- a/arch/blackfin/configs/BF561-ACVILON_defconfig
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -330,7 +330,6 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 792ff093883..1a5808a9aed 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -56,8 +59,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
@@ -66,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -98,6 +100,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -122,14 +125,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -293,8 +323,16 @@ CONFIG_HZ=250
 CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 CONFIG_CYCLES_CLOCKSOURCE=y
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 CONFIG_TICK_ONESHOT=y
@@ -326,12 +364,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 # CONFIG_IP_CHECKSUM_L1 is not set
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -439,7 +481,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -643,6 +684,10 @@ CONFIG_MTD_PHYSMAP=m
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -652,7 +697,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -666,6 +713,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -722,6 +770,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=m
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -779,6 +828,7 @@ CONFIG_SERIAL_BFIN_UART0=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -800,6 +850,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -819,6 +871,7 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
@@ -866,6 +919,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -978,6 +1032,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1002,6 +1057,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1103,12 +1159,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1137,6 +1197,7 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_CPLB_INFO=y
 CONFIG_ACCESS_CHECK=y
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1144,7 +1205,11 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 4432150d89e..1189095aaff 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -319,7 +319,6 @@ CONFIG_ACCESS_OK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index df56639ab2f..feffba8f323 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -279,7 +279,6 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 22e565c51d6..c3c3a77819f 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -288,7 +288,6 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index efcc90d2f34..f891d8400dd 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -288,7 +288,6 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 7f579cf5112..85ce6a90fe8 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -346,7 +346,6 @@ CONFIG_ACCESS_OK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index a6df01dac98..dfb530190af 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -318,7 +318,6 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ad58fede1f4..1c2072dddfa 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -1,7 +1,8 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.2
+# Linux kernel version: 2.6.34
 #
+CONFIG_SYMBOL_PREFIX="_"
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -37,6 +38,7 @@ CONFIG_HAVE_KERNEL_LZMA=y
 CONFIG_KERNEL_GZIP=y
 # CONFIG_KERNEL_BZIP2 is not set
 # CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,13 +51,13 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -92,6 +94,7 @@ CONFIG_SLAB=y
 CONFIG_MMAP_ALLOW_UNINITIALIZED=y
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 
 #
 # GCOV-based kernel profiling
@@ -99,6 +102,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -115,14 +119,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -255,8 +286,16 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+
+#
+# Clock event device
+#
 # CONFIG_TICKSOURCE_GPTMR0 is not set
 CONFIG_TICKSOURCE_CORETMR=y
+
+#
+# Clock souce
+#
 # CONFIG_CYCLES_CLOCKSOURCE is not set
 # CONFIG_GPTMR0_CLOCKSOURCE is not set
 # CONFIG_NO_HZ is not set
@@ -287,12 +326,16 @@ CONFIG_ARITHMETIC_OPS_L1=y
 CONFIG_ACCESS_OK_L1=y
 CONFIG_MEMSET_L1=y
 CONFIG_MEMCPY_L1=y
+CONFIG_STRCMP_L1=y
+CONFIG_STRNCMP_L1=y
+CONFIG_STRCPY_L1=y
+CONFIG_STRNCPY_L1=y
 CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
+CONFIG_CACHE_FLUSH_L1=y
 
 #
 # Speed Optimizations
@@ -392,7 +435,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -562,6 +604,10 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -575,6 +621,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -591,6 +640,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -622,6 +672,7 @@ CONFIG_PHYLIB=y
 # CONFIG_NATIONAL_PHY is not set
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -630,7 +681,6 @@ CONFIG_BFIN_MAC=y
 # CONFIG_BFIN_MAC_USE_L1 is not set
 CONFIG_BFIN_TX_DESC_NUM=100
 CONFIG_BFIN_RX_DESC_NUM=100
-CONFIG_BFIN_MAC_RMII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
@@ -671,6 +721,7 @@ CONFIG_BFIN_MAC_RMII=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -690,9 +741,9 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_AD7877=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7160 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
@@ -709,6 +760,7 @@ CONFIG_TOUCHSCREEN_AD7877=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
 # CONFIG_INPUT_ATI_REMOTE is not set
 # CONFIG_INPUT_ATI_REMOTE2 is not set
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
@@ -716,9 +768,8 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
 # CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_ADXL34X is not set
 
 #
 # Hardware I/O ports
@@ -761,6 +812,7 @@ CONFIG_SERIAL_BFIN_UART1=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -788,6 +840,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -800,16 +853,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -821,6 +867,8 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_BFIN_SPORT is not set
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -852,10 +900,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -867,6 +916,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -892,6 +942,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -905,6 +956,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -918,19 +970,23 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -973,6 +1029,7 @@ CONFIG_FB_BF537_LQ035=y
 # CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set
 # CONFIG_LCD_ILI9320 is not set
@@ -981,6 +1038,7 @@ CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
 # CONFIG_BACKLIGHT_ADP8870 is not set
 
 #
@@ -1011,11 +1069,6 @@ CONFIG_SND_DRIVERS=y
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
 CONFIG_SND_SPI=y
-
-#
-# ALSA Blackfin devices
-#
-# CONFIG_SND_BFIN_AD73322 is not set
 # CONFIG_SND_SOC is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
@@ -1073,6 +1126,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1101,7 +1155,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1137,7 +1193,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1186,6 +1241,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1210,6 +1266,7 @@ CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1276,11 +1333,14 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_SECTION_MISMATCH=y
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_TRACEHOOK_SELF_TEST is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
@@ -1300,6 +1360,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
 # CONFIG_CPLB_INFO is not set
 # CONFIG_ACCESS_CHECK is not set
 # CONFIG_BFIN_ISRAM_SELF_TEST is not set
+# CONFIG_BFIN_PSEUDODBG_INSNS is not set
 
 #
 # Security options
@@ -1309,8 +1370,12 @@ CONFIG_SECURITY=y
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
 # CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/blackfin/configs/TCM-BF518_defconfig b/arch/blackfin/configs/TCM-BF518_defconfig
index 4d31e2a4ed4..cdf4c00f2c4 100644
--- a/arch/blackfin/configs/TCM-BF518_defconfig
+++ b/arch/blackfin/configs/TCM-BF518_defconfig
@@ -333,7 +333,6 @@ CONFIG_ACCESS_OK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 60adfad54db..00f221f0c72 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -287,7 +287,6 @@ CONFIG_IP_CHECKSUM_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 CONFIG_SYSCALL_TAB_L1=y
 CONFIG_CPLB_SWITCH_TAB_L1=y
-CONFIG_APP_STACK_L1=y
 
 #
 # Speed Optimizations
diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
index abdb2af5290..0b6910bdc57 100644
--- a/arch/blackfin/include/asm/bfin_rotary.h
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -2,7 +2,7 @@
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -40,4 +40,76 @@ struct bfin_rotary_platform_data {
 	unsigned short debounce;	/* 0..17 */
 	unsigned short mode;
 };
+
+/* CNT_CONFIG bitmasks */
+#define CNTE		(1 << 0)	/* Counter Enable */
+#define DEBE		(1 << 1)	/* Debounce Enable */
+#define CDGINV		(1 << 4)	/* CDG Pin Polarity Invert */
+#define CUDINV		(1 << 5)	/* CUD Pin Polarity Invert */
+#define CZMINV		(1 << 6)	/* CZM Pin Polarity Invert */
+#define CNTMODE_SHIFT	8
+#define CNTMODE		(0x7 << CNTMODE_SHIFT)	/* Counter Operating Mode */
+#define ZMZC		(1 << 1)	/* CZM Zeroes Counter Enable */
+#define BNDMODE_SHIFT	12
+#define BNDMODE		(0x3 << BNDMODE_SHIFT)	/* Boundary register Mode */
+#define INPDIS		(1 << 15)	/* CUG and CDG Input Disable */
+
+#define CNTMODE_QUADENC	(0 << CNTMODE_SHIFT)	/* quadrature encoder mode */
+#define CNTMODE_BINENC	(1 << CNTMODE_SHIFT)	/* binary encoder mode */
+#define CNTMODE_UDCNT	(2 << CNTMODE_SHIFT)	/* up/down counter mode */
+#define CNTMODE_DIRCNT	(4 << CNTMODE_SHIFT)	/* direction counter mode */
+#define CNTMODE_DIRTMR	(5 << CNTMODE_SHIFT)	/* direction timer mode */
+
+#define BNDMODE_COMP	(0 << BNDMODE_SHIFT)	/* boundary compare mode */
+#define BNDMODE_ZERO	(1 << BNDMODE_SHIFT)	/* boundary compare and zero mode */
+#define BNDMODE_CAPT	(2 << BNDMODE_SHIFT)	/* boundary capture mode */
+#define BNDMODE_AEXT	(3 << BNDMODE_SHIFT)	/* boundary auto-extend mode */
+
+/* CNT_IMASK bitmasks */
+#define ICIE		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Enable */
+#define UCIE		(1 << 1)	/* Up count Interrupt Enable */
+#define DCIE		(1 << 2)	/* Down count Interrupt Enable */
+#define MINCIE		(1 << 3)	/* Min Count Interrupt Enable */
+#define MAXCIE		(1 << 4)	/* Max Count Interrupt Enable */
+#define COV31IE		(1 << 5)	/* Bit 31 Overflow Interrupt Enable */
+#define COV15IE		(1 << 6)	/* Bit 15 Overflow Interrupt Enable */
+#define CZEROIE		(1 << 7)	/* Count to Zero Interrupt Enable */
+#define CZMIE		(1 << 8)	/* CZM Pin Interrupt Enable */
+#define CZMEIE		(1 << 9)	/* CZM Error Interrupt Enable */
+#define CZMZIE		(1 << 10)	/* CZM Zeroes Counter Interrupt Enable */
+
+/* CNT_STATUS bitmasks */
+#define ICII		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Identifier */
+#define UCII		(1 << 1)	/* Up count Interrupt Identifier */
+#define DCII		(1 << 2)	/* Down count Interrupt Identifier */
+#define MINCII		(1 << 3)	/* Min Count Interrupt Identifier */
+#define MAXCII		(1 << 4)	/* Max Count Interrupt Identifier */
+#define COV31II		(1 << 5)	/* Bit 31 Overflow Interrupt Identifier */
+#define COV15II		(1 << 6)	/* Bit 15 Overflow Interrupt Identifier */
+#define CZEROII		(1 << 7)	/* Count to Zero Interrupt Identifier */
+#define CZMII		(1 << 8)	/* CZM Pin Interrupt Identifier */
+#define CZMEII		(1 << 9)	/* CZM Error Interrupt Identifier */
+#define CZMZII		(1 << 10)	/* CZM Zeroes Counter Interrupt Identifier */
+
+/* CNT_COMMAND bitmasks */
+#define W1LCNT		0xf		/* Load Counter Register */
+#define W1LMIN		0xf0		/* Load Min Register */
+#define W1LMAX		0xf00		/* Load Max Register */
+#define W1ZMONCE	(1 << 12)	/* Enable CZM Clear Counter Once */
+
+#define W1LCNT_ZERO	(1 << 0)	/* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN	(1 << 2)	/* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX	(1 << 3)	/* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO	(1 << 4)	/* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT	(1 << 5)	/* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX	(1 << 7)	/* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO	(1 << 8)	/* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT	(1 << 9)	/* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN	(1 << 10)	/* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_DEBOUNCE bitmasks */
+#define DPRESCALE	0xf		/* Load Counter Register */
+
 #endif
diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h
index d61d5497c59..6a4cfe2d336 100644
--- a/arch/blackfin/include/asm/bfin_sdh.h
+++ b/arch/blackfin/include/asm/bfin_sdh.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sdh.h - Blackfin SDH definitions
+ * Blackfin Secure Digital Host (SDH) definitions
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,6 +9,7 @@
 #ifndef __BFIN_SDH_H__
 #define __BFIN_SDH_H__
 
+/* Platform resources */
 struct bfin_sd_host {
 	int dma_chan;
 	int irq_int0;
@@ -16,4 +17,118 @@ struct bfin_sd_host {
 	u16 pin_req[7];
 };
 
+/* SDH_COMMAND bitmasks */
+#define CMD_IDX            0x3f        /* Command Index */
+#define CMD_RSP            (1 << 6)    /* Response */
+#define CMD_L_RSP          (1 << 7)    /* Long Response */
+#define CMD_INT_E          (1 << 8)    /* Command Interrupt */
+#define CMD_PEND_E         (1 << 9)    /* Command Pending */
+#define CMD_E              (1 << 10)   /* Command Enable */
+
+/* SDH_PWR_CTL bitmasks */
+#define PWR_ON             0x3         /* Power On */
+#define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
+#define ROD_CTL            (1 << 7)    /* Rod Control */
+
+/* SDH_CLK_CTL bitmasks */
+#define CLKDIV             0xff        /* MC_CLK Divisor */
+#define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E           (1 << 9)    /* Power Save Enable */
+#define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
+#define WIDE_BUS           (1 << 11)   /* Wide Bus Mode Enable */
+
+/* SDH_RESP_CMD bitmasks */
+#define RESP_CMD           0x3f        /* Response Command */
+
+/* SDH_DATA_CTL bitmasks */
+#define DTX_E              (1 << 0)    /* Data Transfer Enable */
+#define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
+#define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
+#define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+
+/* SDH_STATUS bitmasks */
+#define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
+#define DAT_CRC_FAIL       (1 << 1)    /* Data CRC Fail */
+#define CMD_TIME_OUT       (1 << 2)    /* CMD Time Out */
+#define DAT_TIME_OUT       (1 << 3)    /* Data Time Out */
+#define TX_UNDERRUN        (1 << 4)    /* Transmit Underrun */
+#define RX_OVERRUN         (1 << 5)    /* Receive Overrun */
+#define CMD_RESP_END       (1 << 6)    /* CMD Response End */
+#define CMD_SENT           (1 << 7)    /* CMD Sent */
+#define DAT_END            (1 << 8)    /* Data End */
+#define START_BIT_ERR      (1 << 9)    /* Start Bit Error */
+#define DAT_BLK_END        (1 << 10)   /* Data Block End */
+#define CMD_ACT            (1 << 11)   /* CMD Active */
+#define TX_ACT             (1 << 12)   /* Transmit Active */
+#define RX_ACT             (1 << 13)   /* Receive Active */
+#define TX_FIFO_STAT       (1 << 14)   /* Transmit FIFO Status */
+#define RX_FIFO_STAT       (1 << 15)   /* Receive FIFO Status */
+#define TX_FIFO_FULL       (1 << 16)   /* Transmit FIFO Full */
+#define RX_FIFO_FULL       (1 << 17)   /* Receive FIFO Full */
+#define TX_FIFO_ZERO       (1 << 18)   /* Transmit FIFO Empty */
+#define RX_DAT_ZERO        (1 << 19)   /* Receive FIFO Empty */
+#define TX_DAT_RDY         (1 << 20)   /* Transmit Data Available */
+#define RX_FIFO_RDY        (1 << 21)   /* Receive Data Available */
+
+/* SDH_STATUS_CLR bitmasks */
+#define CMD_CRC_FAIL_STAT  (1 << 0)    /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT  (1 << 1)    /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT   (1 << 2)    /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT   (1 << 3)    /* Data Time Out status */
+#define TX_UNDERRUN_STAT   (1 << 4)    /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT    (1 << 5)    /* Receive Overrun Status */
+#define CMD_RESP_END_STAT  (1 << 6)    /* CMD Response End Status */
+#define CMD_SENT_STAT      (1 << 7)    /* CMD Sent Status */
+#define DAT_END_STAT       (1 << 8)    /* Data End Status */
+#define START_BIT_ERR_STAT (1 << 9)    /* Start Bit Error Status */
+#define DAT_BLK_END_STAT   (1 << 10)   /* Data Block End Status */
+
+/* SDH_MASK0 bitmasks */
+#define CMD_CRC_FAIL_MASK  (1 << 0)    /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK  (1 << 1)    /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK   (1 << 2)    /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK   (1 << 3)    /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK   (1 << 4)    /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK    (1 << 5)    /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK  (1 << 6)    /* CMD Response End Mask */
+#define CMD_SENT_MASK      (1 << 7)    /* CMD Sent Mask */
+#define DAT_END_MASK       (1 << 8)    /* Data End Mask */
+#define START_BIT_ERR_MASK (1 << 9)    /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK   (1 << 10)   /* Data Block End Mask */
+#define CMD_ACT_MASK       (1 << 11)   /* CMD Active Mask */
+#define TX_ACT_MASK        (1 << 12)   /* Transmit Active Mask */
+#define RX_ACT_MASK        (1 << 13)   /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK  (1 << 14)   /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK  (1 << 15)   /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK  (1 << 16)   /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK  (1 << 17)   /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK  (1 << 18)   /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK   (1 << 19)   /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK    (1 << 20)   /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK   (1 << 21)   /* Receive Data Available Mask */
+
+/* SDH_FIFO_CNT bitmasks */
+#define FIFO_COUNT         0x7fff      /* FIFO Count */
+
+/* SDH_E_STATUS bitmasks */
+#define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
+#define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+
+/* SDH_E_MASK bitmasks */
+#define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
+#define SCD_MSK            (1 << 6)    /* Mask Card Detect */
+
+/* SDH_CFG bitmasks */
+#define CLKS_EN            (1 << 0)    /* Clocks Enable */
+#define SD4E               (1 << 2)    /* SDIO 4-Bit Enable */
+#define MWE                (1 << 3)    /* Moving Window Enable */
+#define SD_RST             (1 << 4)    /* SDMMC Reset */
+#define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
+#define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+
+/* SDH_RD_WAIT_EN bitmasks */
+#define RWR                (1 << 0)    /* Read Wait Request */
+
 #endif
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 605ba8e9b2e..d5872cd967a 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -119,7 +119,7 @@ static inline unsigned int hweight32(unsigned int w)
 {
 	unsigned int res;
 
-	__asm__ ("%0.l = ONES %0;"
+	__asm__ ("%0.l = ONES %1;"
 		"%0 = %0.l (Z);"
 		: "=d" (res) : "d" (w));
 	return res;
diff --git a/arch/blackfin/include/asm/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
index 8778e0f0373..6c39d94b44d 100644
--- a/arch/blackfin/include/asm/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -216,12 +216,16 @@
 #define bfin_write_EVT14(val)                bfin_write32(EVT14,val)
 #define bfin_read_EVT15()                    bfin_read32(EVT15)
 #define bfin_write_EVT15(val)                bfin_write32(EVT15,val)
+#define bfin_read_EVT_OVERRIDE()             bfin_read32(EVT_OVERRIDE)
+#define bfin_write_EVT_OVERRIDE(val)         bfin_write32(EVT_OVERRIDE,val)
 #define bfin_read_IMASK()                    bfin_read32(IMASK)
 #define bfin_write_IMASK(val)                bfin_write32(IMASK,val)
 #define bfin_read_IPEND()                    bfin_read32(IPEND)
 #define bfin_write_IPEND(val)                bfin_write32(IPEND,val)
 #define bfin_read_ILAT()                     bfin_read32(ILAT)
 #define bfin_write_ILAT(val)                 bfin_write32(ILAT,val)
+#define bfin_read_IPRIO()                    bfin_read32(IPRIO)
+#define bfin_write_IPRIO(val)                bfin_write32(IPRIO,val)
 
 /*Core Timer Registers*/
 #define bfin_read_TCNTL()                    bfin_read32(TCNTL)
@@ -299,8 +303,4 @@
 #define bfin_read_PFCNTR1()                  bfin_read32(PFCNTR1)
 #define bfin_write_PFCNTR1(val)              bfin_write32(PFCNTR1,val)
 
-/*
-#define IPRIO                  0xFFE02110
-*/
-
 #endif				/* _CDEF_LPBLACKFIN_H */
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index f342ff0319d..e3f0f4c4981 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -50,6 +50,23 @@
 #define bfin_write16(addr, val) _bfin_writeX(addr, val, 16, w)
 #define bfin_write32(addr, val) _bfin_writeX(addr, val, 32,  )
 
+#define bfin_read(addr) \
+({ \
+    sizeof(*(addr)) == 1 ? bfin_read8(addr)  : \
+    sizeof(*(addr)) == 2 ? bfin_read16(addr) : \
+    sizeof(*(addr)) == 4 ? bfin_read32(addr) : \
+    ({ BUG(); 0; }); \
+})
+#define bfin_write(addr, val) \
+({ \
+	switch (sizeof(*(addr))) { \
+	case 1: bfin_write8(addr, val);  break; \
+	case 2: bfin_write16(addr, val); break; \
+	case 4: bfin_write32(addr, val); break; \
+	default: BUG(); \
+	} \
+})
+
 #endif /* __ASSEMBLY__ */
 
 /**************************************************
@@ -377,6 +394,7 @@
 #define EVT13              0xFFE02034	/* Event Vector 13 ESR Address */
 #define EVT14              0xFFE02038	/* Event Vector 14 ESR Address */
 #define EVT15              0xFFE0203C	/* Event Vector 15 ESR Address */
+#define EVT_OVERRIDE       0xFFE02100	/* Event Vector Override Register */
 #define IMASK              0xFFE02104	/* Interrupt Mask Register */
 #define IPEND              0xFFE02108	/* Interrupt Pending Register */
 #define ILAT               0xFFE0210C	/* Interrupt Latch Register */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index 2c09b1d50ec..eedf3ca65ba 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -276,6 +276,7 @@ static inline void clear_dma_irqstat(unsigned int channel)
 }
 
 void *dma_memcpy(void *dest, const void *src, size_t count);
+void *dma_memcpy_nocache(void *dest, const void *src, size_t count);
 void *safe_dma_memcpy(void *dest, const void *src, size_t count);
 void blackfin_dma_early_init(void);
 void early_dma_memcpy(void *dest, const void *src, size_t count);
diff --git a/arch/blackfin/include/asm/elf.h b/arch/blackfin/include/asm/elf.h
index 117713adea7..e6c6812a9ab 100644
--- a/arch/blackfin/include/asm/elf.h
+++ b/arch/blackfin/include/asm/elf.h
@@ -119,6 +119,7 @@ do {											\
 #define ELF_CORE_COPY_REGS(pr_reg, regs)	\
         memcpy((char *) &pr_reg, (char *)regs,  \
                sizeof(struct pt_regs));
+#define ELF_CORE_COPY_FPREGS(...) 0	/* Blackfin has no FPU */
 
 /* This yields a mask that user programs can use to figure out what
    instruction set this cpu supports.  */
diff --git a/arch/blackfin/include/asm/ftrace.h b/arch/blackfin/include/asm/ftrace.h
index 4cfe2d9ba7e..8a029505d7b 100644
--- a/arch/blackfin/include/asm/ftrace.h
+++ b/arch/blackfin/include/asm/ftrace.h
@@ -12,6 +12,22 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void _mcount(void);
+#define MCOUNT_ADDR ((unsigned long)_mcount)
+
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+	/* No extra data needed for Blackfin */
+};
+
+#endif
+
 #ifdef CONFIG_FRAME_POINTER
 #include <linux/mm.h>
 
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 01b19d0cf50..1ef8417f5d2 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -7,63 +7,63 @@
 #ifndef __ARCH_BLACKFIN_GPIO_H__
 #define __ARCH_BLACKFIN_GPIO_H__
 
-#define gpio_bank(x) 	((x) >> 4)
-#define gpio_bit(x)  	(1<<((x) & 0xF))
-#define gpio_sub_n(x) 	((x) & 0xF)
+#define gpio_bank(x)	((x) >> 4)
+#define gpio_bit(x)	(1<<((x) & 0xF))
+#define gpio_sub_n(x)	((x) & 0xF)
 
-#define GPIO_BANKSIZE 	16
-#define GPIO_BANK_NUM 	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
+#define GPIO_BANKSIZE	16
+#define GPIO_BANK_NUM	DIV_ROUND_UP(MAX_BLACKFIN_GPIOS, GPIO_BANKSIZE)
 
 #include <mach/gpio.h>
 
-#define	GPIO_0	0
-#define	GPIO_1	1
-#define	GPIO_2	2
-#define	GPIO_3	3
-#define	GPIO_4	4
-#define	GPIO_5	5
-#define	GPIO_6	6
-#define	GPIO_7	7
-#define	GPIO_8	8
-#define	GPIO_9	9
-#define	GPIO_10	10
-#define	GPIO_11	11
-#define	GPIO_12	12
-#define	GPIO_13	13
-#define	GPIO_14	14
-#define	GPIO_15	15
-#define	GPIO_16	16
-#define	GPIO_17	17
-#define	GPIO_18	18
-#define	GPIO_19	19
-#define	GPIO_20	20
-#define	GPIO_21	21
-#define	GPIO_22	22
-#define	GPIO_23	23
-#define	GPIO_24	24
-#define	GPIO_25	25
-#define	GPIO_26	26
-#define	GPIO_27	27
-#define	GPIO_28	28
-#define	GPIO_29	29
-#define	GPIO_30	30
-#define	GPIO_31	31
-#define	GPIO_32	32
-#define	GPIO_33	33
-#define	GPIO_34	34
-#define	GPIO_35	35
-#define	GPIO_36	36
-#define	GPIO_37	37
-#define	GPIO_38	38
-#define	GPIO_39	39
-#define	GPIO_40	40
-#define	GPIO_41	41
-#define	GPIO_42	42
-#define	GPIO_43	43
-#define	GPIO_44	44
-#define	GPIO_45	45
-#define	GPIO_46	46
-#define	GPIO_47	47
+#define GPIO_0	0
+#define GPIO_1	1
+#define GPIO_2	2
+#define GPIO_3	3
+#define GPIO_4	4
+#define GPIO_5	5
+#define GPIO_6	6
+#define GPIO_7	7
+#define GPIO_8	8
+#define GPIO_9	9
+#define GPIO_10	10
+#define GPIO_11	11
+#define GPIO_12	12
+#define GPIO_13	13
+#define GPIO_14	14
+#define GPIO_15	15
+#define GPIO_16	16
+#define GPIO_17	17
+#define GPIO_18	18
+#define GPIO_19	19
+#define GPIO_20	20
+#define GPIO_21	21
+#define GPIO_22	22
+#define GPIO_23	23
+#define GPIO_24	24
+#define GPIO_25	25
+#define GPIO_26	26
+#define GPIO_27	27
+#define GPIO_28	28
+#define GPIO_29	29
+#define GPIO_30	30
+#define GPIO_31	31
+#define GPIO_32	32
+#define GPIO_33	33
+#define GPIO_34	34
+#define GPIO_35	35
+#define GPIO_36	36
+#define GPIO_37	37
+#define GPIO_38	38
+#define GPIO_39	39
+#define GPIO_40	40
+#define GPIO_41	41
+#define GPIO_42	42
+#define GPIO_43	43
+#define GPIO_44	44
+#define GPIO_45	45
+#define GPIO_46	46
+#define GPIO_47	47
 
 #define PERIPHERAL_USAGE 1
 #define GPIO_USAGE 0
@@ -279,6 +279,11 @@ static inline int gpio_direction_output(unsigned gpio, int value)
 	return bfin_gpio_direction_output(gpio, value);
 }
 
+static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
+{
+	return -EINVAL;
+}
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	return bfin_gpio_get_value(gpio);
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 29e55b9d88b..234fbac17ec 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -124,7 +124,13 @@ static inline unsigned int readl(const volatile void __iomem *addr)
 #define iowrite16(val, x)		writew(val, x)
 #define iowrite32(val, x)		writel(val, x)
 
-#define mmiowb() wmb()
+/**
+ * I/O write barrier
+ *
+ * Ensure ordering of I/O space writes. This will make sure that writes
+ * following the barrier will arrive after all previous writes.
+ */
+#define mmiowb() do { SSYNC(); wmb(); } while (0)
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/arch/blackfin/include/asm/local64.h b/arch/blackfin/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/blackfin/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 7c8fe834ff2..237579935e2 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -10,7 +10,6 @@
 #if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
     defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
@@ -178,7 +177,6 @@
 
 #if defined(CONFIG_MEM_MT48LC32M8A2_75) || \
     defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
-    defined(CONFIG_MEM_GENERIC_BOARD) || \
     defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
     defined(CONFIG_MEM_MT48LC32M8A2_75)
@@ -248,22 +246,6 @@
 #define DDR_tWR		DDR_TWR(MIN_DDR_SCLK(15))
 #endif
 
-#if defined(CONFIG_MEM_GENERIC_BOARD)
-#define DDR_SIZE	DEVSZ_512
-#define DDR_WIDTH	DEVWD_16
-#define DDR_MAX_tCK	13
-
-#define DDR_tRCD	DDR_TRCD(3)
-#define DDR_tWTR	DDR_TWTR(2)
-#define DDR_tWR		DDR_TWR(2)
-#define DDR_tMRD	DDR_TMRD(2)
-#define DDR_tRP		DDR_TRP(3)
-#define DDR_tRAS	DDR_TRAS(7)
-#define DDR_tRC		DDR_TRC(10)
-#define DDR_tRFC	DDR_TRFC(12)
-#define DDR_tREFI	DDR_TREFI(1288)
-#endif
-
 #if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
 # error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
 #elif(CONFIG_SCLK_HZ <= 133333333)
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index edd8ef3a378..9b1e2c37b32 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -1,9 +1,9 @@
 /*
  * Common header file for Blackfin family of processors
  *
- * Copyright 2007-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_
@@ -1042,8 +1042,8 @@ void peripheral_free_list(const unsigned short per[]);
 #define P_NOR_CLK P_UNDEF
 #endif
 
-#ifndef  P_TMRCLK
-#define  P_TMRCLK P_UNDEF
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
 #endif
 
 #ifndef P_AMC_ARDY_NOR_WAIT
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 30d0d1f01dc..ca5ccc77777 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -16,6 +16,7 @@ else
     obj-y += time.o
 endif
 
+obj-$(CONFIG_DYNAMIC_FTRACE)         += ftrace.o
 obj-$(CONFIG_FUNCTION_TRACER)        += ftrace-entry.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)  += ftrace.o
 CFLAGS_REMOVE_ftrace.o = -pg
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 26403d1c9e6..1e485dfdc9f 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -450,7 +450,6 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 {
 	unsigned long dst = (unsigned long)pdst;
 	unsigned long src = (unsigned long)psrc;
-	size_t bulk, rest;
 
 	if (bfin_addr_dcacheable(src))
 		blackfin_dcache_flush_range(src, src + size);
@@ -458,6 +457,22 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	if (bfin_addr_dcacheable(dst))
 		blackfin_dcache_invalidate_range(dst, dst + size);
 
+	return dma_memcpy_nocache(pdst, psrc, size);
+}
+EXPORT_SYMBOL(dma_memcpy);
+
+/**
+ *	dma_memcpy_nocache - DMA memcpy under mutex lock
+ *	- No cache flush/invalidate
+ *
+ * Do not check arguments before starting the DMA memcpy.  Break the transfer
+ * up into two pieces.  The first transfer is in multiples of 64k and the
+ * second transfer is the piece smaller than 64k.
+ */
+void *dma_memcpy_nocache(void *pdst, const void *psrc, size_t size)
+{
+	size_t bulk, rest;
+
 	bulk = size & ~0xffff;
 	rest = size - bulk;
 	if (bulk)
@@ -465,7 +480,7 @@ void *dma_memcpy(void *pdst, const void *psrc, size_t size)
 	_dma_memcpy(pdst + bulk, psrc + bulk, rest);
 	return pdst;
 }
-EXPORT_SYMBOL(dma_memcpy);
+EXPORT_SYMBOL(dma_memcpy_nocache);
 
 /**
  *	safe_dma_memcpy - DMA memcpy w/argument checking
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 42833ee2b30..dc07ed08b37 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -108,11 +108,7 @@ static unsigned short * const port_fer[] = {
 };
 #endif
 
-static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
-static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)];
-static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM];
-
-#define RESOURCE_LABEL_SIZE 	16
+#define RESOURCE_LABEL_SIZE	16
 
 static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
@@ -122,19 +118,6 @@ static struct str_ident {
 static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
 #endif
 
-inline int check_gpio(unsigned gpio)
-{
-#if defined(CONFIG_BF54x)
-	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
-	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
-	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
-		return -EINVAL;
-#endif
-	if (gpio >= MAX_BLACKFIN_GPIOS)
-		return -EINVAL;
-	return 0;
-}
-
 static void gpio_error(unsigned gpio)
 {
 	printk(KERN_ERR "bfin-gpio: GPIO %d wasn't requested!\n", gpio);
@@ -167,6 +150,29 @@ static int cmp_label(unsigned short ident, const char *label)
 		return -EINVAL;
 }
 
+#define map_entry(m, i)      reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i)        (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i)      (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) static unsigned short reserved_##m##_map[c]
+
+DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+DECLARE_RESERVED_MAP(peri, DIV_ROUND_UP(MAX_RESOURCES, GPIO_BANKSIZE));
+DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
+
+inline int check_gpio(unsigned gpio)
+{
+#if defined(CONFIG_BF54x)
+	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
+	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
+		return -EINVAL;
+#endif
+	if (gpio >= MAX_BLACKFIN_GPIOS)
+		return -EINVAL;
+	return 0;
+}
+
 static void port_setup(unsigned gpio, unsigned short usage)
 {
 #if defined(BF538_FAMILY)
@@ -475,7 +481,7 @@ GET_GPIO_P(maskb)
 
 
 #ifdef CONFIG_PM
-static unsigned short wakeup_map[GPIO_BANK_NUM];
+DECLARE_RESERVED_MAP(wakeup, GPIO_BANK_NUM);
 
 static const unsigned int sic_iwr_irqs[] = {
 #if defined(BF533_FAMILY)
@@ -521,9 +527,9 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 
 	local_irq_save_hw(flags);
 	if (ctrl)
-		wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+		reserve(wakeup, gpio);
 	else
-		wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+		unreserve(wakeup, gpio);
 
 	set_gpio_maskb(gpio, ctrl);
 	local_irq_restore_hw(flags);
@@ -536,7 +542,7 @@ int bfin_pm_standby_ctrl(unsigned ctrl)
 	u16 bank, mask, i;
 
 	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = wakeup_map[gpio_bank(i)];
+		mask = map_entry(wakeup, i);
 		bank = gpio_bank(i);
 
 		if (mask)
@@ -653,7 +659,7 @@ EXPORT_SYMBOL(get_gpio_dir);
 
 /***********************************************************
 *
-* FUNCTIONS: 	Blackfin Peripheral Resource Allocation
+* FUNCTIONS:	Blackfin Peripheral Resource Allocation
 *		and PortMux Setup
 *
 * INPUTS/OUTPUTS:
@@ -689,8 +695,7 @@ int peripheral_request(unsigned short per, const char *label)
 	/* If a pin can be muxed as either GPIO or peripheral, make
 	 * sure it is not already a GPIO pin when we request it.
 	 */
-	if (unlikely(!check_gpio(ident) &&
-	    reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+	if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
@@ -700,7 +705,7 @@ int peripheral_request(unsigned short per, const char *label)
 		return -EBUSY;
 	}
 
-	if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+	if (unlikely(is_reserved(peri, ident, 1))) {
 
 		/*
 		 * Pin functions like AMC address strobes my
@@ -731,7 +736,7 @@ int peripheral_request(unsigned short per, const char *label)
 	}
 
  anyway:
-	reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+	reserve(peri, ident);
 
 	portmux_setup(per);
 	port_setup(ident, PERIPHERAL_USAGE);
@@ -777,7 +782,7 @@ void peripheral_free(unsigned short per)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
+	if (unlikely(!is_reserved(peri, ident, 0))) {
 		local_irq_restore_hw(flags);
 		return;
 	}
@@ -785,7 +790,7 @@ void peripheral_free(unsigned short per)
 	if (!(per & P_MAYSHARE))
 		port_setup(ident, GPIO_USAGE);
 
-	reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+	unreserve(peri, ident);
 
 	set_label(ident, "free");
 
@@ -836,7 +841,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		return 0;
 	}
 
-	if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(gpio, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
@@ -844,7 +849,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(peri, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
@@ -853,7 +858,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
 	}
@@ -863,7 +868,7 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	}
 #endif
 
-	reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(gpio, gpio);
 	set_label(gpio, label);
 
 	local_irq_restore_hw(flags);
@@ -885,7 +890,7 @@ void bfin_gpio_free(unsigned gpio)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		gpio_error(gpio);
@@ -893,7 +898,7 @@ void bfin_gpio_free(unsigned gpio)
 		return;
 	}
 
-	reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(gpio, gpio);
 
 	set_label(gpio, "free");
 
@@ -902,7 +907,7 @@ void bfin_gpio_free(unsigned gpio)
 EXPORT_SYMBOL(bfin_gpio_free);
 
 #ifdef BFIN_SPECIAL_GPIO_BANKS
-static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)];
+DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
 
 int bfin_special_gpio_request(unsigned gpio, const char *label)
 {
@@ -921,14 +926,14 @@ int bfin_special_gpio_request(unsigned gpio, const char *label)
 		return 0;
 	}
 
-	if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(special_gpio, gpio, 1))) {
 		local_irq_restore_hw(flags);
 		printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
 		       gpio, get_label(gpio));
 
 		return -EBUSY;
 	}
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(peri, gpio, 1))) {
 		local_irq_restore_hw(flags);
 		printk(KERN_ERR
 		       "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
@@ -937,8 +942,8 @@ int bfin_special_gpio_request(unsigned gpio, const char *label)
 		return -EBUSY;
 	}
 
-	reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-	reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(special_gpio, gpio);
+	reserve(peri, gpio);
 
 	set_label(gpio, label);
 	local_irq_restore_hw(flags);
@@ -956,14 +961,14 @@ void bfin_special_gpio_free(unsigned gpio)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
 		gpio_error(gpio);
 		local_irq_restore_hw(flags);
 		return;
 	}
 
-	reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-	reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(special_gpio, gpio);
+	unreserve(peri, gpio);
 	set_label(gpio, "free");
 	local_irq_restore_hw(flags);
 }
@@ -980,7 +985,7 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(is_reserved(peri, gpio, 1))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		printk(KERN_ERR
@@ -989,12 +994,12 @@ int bfin_gpio_irq_request(unsigned gpio, const char *label)
 		local_irq_restore_hw(flags);
 		return -EBUSY;
 	}
-	if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+	if (unlikely(is_reserved(gpio, gpio, 1)))
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! "
 		       "(Documentation/blackfin/bfin-gpio-notes.txt)\n",
 		       gpio, get_label(gpio));
 
-	reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+	reserve(gpio_irq, gpio);
 	set_label(gpio, label);
 
 	local_irq_restore_hw(flags);
@@ -1013,7 +1018,7 @@ void bfin_gpio_irq_free(unsigned gpio)
 
 	local_irq_save_hw(flags);
 
-	if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+	if (unlikely(!is_reserved(gpio_irq, gpio, 0))) {
 		if (system_state == SYSTEM_BOOTING)
 			dump_stack();
 		gpio_error(gpio);
@@ -1021,7 +1026,7 @@ void bfin_gpio_irq_free(unsigned gpio)
 		return;
 	}
 
-	reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+	unreserve(gpio_irq, gpio);
 
 	set_label(gpio, "free");
 
@@ -1042,7 +1047,7 @@ int bfin_gpio_direction_input(unsigned gpio)
 {
 	unsigned long flags;
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		gpio_error(gpio);
 		return -EINVAL;
 	}
@@ -1084,7 +1089,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 {
 	unsigned long flags;
 
-	if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+	if (unlikely(!is_reserved(gpio, gpio, 0))) {
 		gpio_error(gpio);
 		return -EINVAL;
 	}
@@ -1153,13 +1158,13 @@ static int gpio_proc_read(char *buf, char **start, off_t offset,
 	int c, irq, gpio, outlen = 0;
 
 	for (c = 0; c < MAX_RESOURCES; c++) {
-		irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c);
-		gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c);
+		irq = is_reserved(gpio_irq, c, 1);
+		gpio = is_reserved(gpio, c, 1);
 		if (!check_gpio(c) && (gpio || irq))
 			len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c,
 				 get_label(c), (gpio && irq) ? " *" : "",
 				 get_gpio_dir(c) ? "OUTPUT" : "INPUT");
-		else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c))
+		else if (is_reserved(peri, c, 1))
 			len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c));
 		else
 			continue;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index 30fd6417f06..c15fd05f0b0 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -13,10 +13,6 @@
 #include <asm/cplbinit.h>
 #include <asm/mem_map.h>
 
-#if ANOMALY_05000263
-# error the MPU will not function safely while Anomaly 05000263 applies
-#endif
-
 struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS];
 struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS];
 
diff --git a/arch/blackfin/kernel/ftrace-entry.S b/arch/blackfin/kernel/ftrace-entry.S
index d66446b572c..7eed00bbd26 100644
--- a/arch/blackfin/kernel/ftrace-entry.S
+++ b/arch/blackfin/kernel/ftrace-entry.S
@@ -10,6 +10,18 @@
 
 .text
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+/* Simple stub so we can boot the kernel until runtime patching has
+ * disabled all calls to this.  Then it'll be unused.
+ */
+ENTRY(__mcount)
+# if ANOMALY_05000371
+	nop; nop; nop; nop;
+# endif
+	rts;
+ENDPROC(__mcount)
+
 /* GCC will have called us before setting up the function prologue, so we
  * can clobber the normal scratch registers, but we need to make sure to
  * save/restore the registers used for argument passing (R0-R2) in case
@@ -20,15 +32,65 @@
  * function.  And since GCC pushed the previous RETS for us, the previous
  * function will be waiting there.  mmmm pie.
  */
+ENTRY(_ftrace_caller)
+# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	/* optional micro optimization: return if stopped */
+	p1.l = _function_trace_stop;
+	p1.h = _function_trace_stop;
+	r3 = [p1];
+	cc = r3 == 0;
+	if ! cc jump _ftrace_stub (bp);
+# endif
+
+	/* save first/second/third function arg and the return register */
+	[--sp] = r2;
+	[--sp] = r0;
+	[--sp] = r1;
+	[--sp] = rets;
+
+	/* function_trace_call(unsigned long ip, unsigned long parent_ip):
+	 *  ip: this point was called by ...
+	 *  parent_ip: ... this function
+	 * the ip itself will need adjusting for the mcount call
+	 */
+	r0 = rets;
+	r1 = [sp + 16];	/* skip the 4 local regs on stack */
+	r0 += -MCOUNT_INSN_SIZE;
+
+.globl _ftrace_call
+_ftrace_call:
+	call _ftrace_stub
+
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
+.globl _ftrace_graph_call
+_ftrace_graph_call:
+	nop;	/* jump _ftrace_graph_caller; */
+# endif
+
+	/* restore state and get out of dodge */
+.Lfinish_trace:
+	rets = [sp++];
+	r1 = [sp++];
+	r0 = [sp++];
+	r2 = [sp++];
+
+.globl _ftrace_stub
+_ftrace_stub:
+	rts;
+ENDPROC(_ftrace_caller)
+
+#else
+
+/* See documentation for _ftrace_caller */
 ENTRY(__mcount)
-#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
+# ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	/* optional micro optimization: return if stopped */
 	p1.l = _function_trace_stop;
 	p1.h = _function_trace_stop;
 	r3 = [p1];
 	cc = r3 == 0;
 	if ! cc jump _ftrace_stub (bp);
-#endif
+# endif
 
 	/* save third function arg early so we can do testing below */
 	[--sp] = r2;
@@ -44,7 +106,7 @@ ENTRY(__mcount)
 	cc = r2 == r3;
 	if ! cc jump .Ldo_trace;
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+# ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	/* if the ftrace_graph_return function pointer is not set to
 	 * the ftrace_stub entry, call prepare_ftrace_return().
 	 */
@@ -64,7 +126,7 @@ ENTRY(__mcount)
 	r3 = [p0];
 	cc = r2 == r3;
 	if ! cc jump _ftrace_graph_caller;
-#endif
+# endif
 
 	r2 = [sp++];
 	rts;
@@ -103,6 +165,8 @@ _ftrace_stub:
 	rts;
 ENDPROC(__mcount)
 
+#endif
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /* The prepare_ftrace_return() function is similar to the trace function
  * except it takes a pointer to the location of the frompc.  This is so
@@ -110,6 +174,7 @@ ENDPROC(__mcount)
  * purposes.
  */
 ENTRY(_ftrace_graph_caller)
+# ifndef CONFIG_DYNAMIC_FTRACE
 	/* save first/second function arg and the return register */
 	[--sp] = r0;
 	[--sp] = r1;
@@ -118,9 +183,13 @@ ENTRY(_ftrace_graph_caller)
 	/* prepare_ftrace_return(parent, self_addr, frame_pointer) */
 	r0 = sp;	/* unsigned long *parent */
 	r1 = rets;	/* unsigned long self_addr */
-#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# else
+	r0 = sp;	/* unsigned long *parent */
+	r1 = [sp];	/* unsigned long self_addr */
+# endif
+# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
 	r2 = fp;	/* unsigned long frame_pointer */
-#endif
+# endif
 	r0 += 16;	/* skip the 4 local regs on stack */
 	r1 += -MCOUNT_INSN_SIZE;
 	call _prepare_ftrace_return;
@@ -139,9 +208,9 @@ ENTRY(_return_to_handler)
 	[--sp] = r1;
 
 	/* get original return address */
-#ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
+# ifdef CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST
 	r0 = fp;	/* Blackfin is sane, so omit this */
-#endif
+# endif
 	call _ftrace_return_to_handler;
 	rets = r0;
 
diff --git a/arch/blackfin/kernel/ftrace.c b/arch/blackfin/kernel/ftrace.c
index a61d948ea92..48808a12b42 100644
--- a/arch/blackfin/kernel/ftrace.c
+++ b/arch/blackfin/kernel/ftrace.c
@@ -1,17 +1,101 @@
 /*
  * ftrace graph code
  *
- * Copyright (C) 2009 Analog Devices Inc.
+ * Copyright (C) 2009-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 #include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/uaccess.h>
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+static const unsigned char mnop[] = {
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+	0x03, 0xc0, 0x00, 0x18, /* MNOP; */
+};
+
+static void bfin_make_pcrel24(unsigned char *insn, unsigned long src,
+                              unsigned long dst)
+{
+	uint32_t pcrel = (dst - src) >> 1;
+	insn[0] = pcrel >> 16;
+	insn[1] = 0xe3;
+	insn[2] = pcrel;
+	insn[3] = pcrel >> 8;
+}
+#define bfin_make_pcrel24(insn, src, dst) bfin_make_pcrel24(insn, src, (unsigned long)(dst))
+
+static int ftrace_modify_code(unsigned long ip, const unsigned char *code,
+                              unsigned long len)
+{
+	int ret = probe_kernel_write((void *)ip, (void *)code, len);
+	flush_icache_range(ip, ip + len);
+	return ret;
+}
+
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+                    unsigned long addr)
+{
+	/* Turn the mcount call site into two MNOPs as those are 32bit insns */
+	return ftrace_modify_code(rec->ip, mnop, sizeof(mnop));
+}
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	/* Restore the mcount call site */
+	unsigned char call[8];
+	call[0] = 0x67; /* [--SP] = RETS; */
+	call[1] = 0x01;
+	bfin_make_pcrel24(&call[2], rec->ip + 2, addr);
+	call[6] = 0x27; /* RETS = [SP++]; */
+	call[7] = 0x01;
+	return ftrace_modify_code(rec->ip, call, sizeof(call));
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned char call[4];
+	unsigned long ip = (unsigned long)&ftrace_call;
+	bfin_make_pcrel24(call, ip, func);
+	return ftrace_modify_code(ip, call, sizeof(call));
+}
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+	/* return value is done indirectly via data */
+	*(unsigned long *)data = 0;
+
+	return 0;
+}
+
+#endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
+# ifdef CONFIG_DYNAMIC_FTRACE
+
+extern void ftrace_graph_call(void);
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned long ip = (unsigned long)&ftrace_graph_call;
+	uint16_t jump_pcrel12 = ((unsigned long)&ftrace_graph_caller - ip) >> 1;
+	jump_pcrel12 |= 0x2000;
+	return ftrace_modify_code(ip, (void *)&jump_pcrel12, sizeof(jump_pcrel12));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_code((unsigned long)&ftrace_graph_call, empty_zero_page, 2);
+}
+
+# endif
+
 /*
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index d37a397f43f..ac71dc15cbd 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -864,6 +864,13 @@ void __init setup_arch(char **cmdline_p)
 	bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
 	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
 #endif
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+	bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15);
+	bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15);
+	bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15);
+	bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() &
+					~HYST_NONEGPIO_MASK) | HYST_NONEGPIO);
+#endif
 
 	cclk = get_cclk();
 	sclk = get_sclk();
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 984c7817239..4122678529c 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -48,15 +48,10 @@ SECTIONS
 #if !L1_CODE_LENGTH
 		*(.l1.text)
 #endif
-
-		. = ALIGN(16);
-		___start___ex_table = .;
-		*(__ex_table)
-		___stop___ex_table = .;
-
 		__etext = .;
 	}
 
+	EXCEPTION_TABLE(4)
 	NOTES
 
 	/* Just in case the first read only is a 32-bit access */
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index 4ab2d166c83..1d9f631a7f9 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -62,6 +62,67 @@ config BF518_UART1_PORTG
 	  PORT G
 endchoice
 
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF51x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 2829dd0400f..24918c5f7ea 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -5,13 +5,13 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ *  - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -24,6 +24,8 @@
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -52,6 +54,8 @@
 #define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
 /* Incorrect Use of Stack in Lockbox Firmware During Authentication */
 #define ANOMALY_05000431 (1)
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
 #define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
 /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
@@ -74,14 +78,21 @@
 #define ANOMALY_05000461 (1)
 /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
 #define ANOMALY_05000462 (1)
-/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+/* PLL Latches Incorrect Settings During Reset */
+#define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (1)
+/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
 #define ANOMALY_05000473 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
-#define ANOMALY_05000119 (0)
 #define ANOMALY_05000120 (0)
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000149 (0)
@@ -94,6 +105,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -143,5 +155,6 @@
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
 #define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h
index 856b330ecf0..6906dee4f4c 100644
--- a/arch/blackfin/mach-bf518/include/mach/bf518.h
+++ b/arch/blackfin/mach-bf518/include/mach/bf518.h
@@ -85,6 +85,111 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
 
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7)
+
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3C)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
 #ifdef CONFIG_BF518
 #define CPU "BF518"
 #define CPUID 0x27e8
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 92e950d6e99..98a51c47929 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -45,139 +45,4 @@
 #define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
 #define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
 
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 #endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 9241205fb99..2bc8f4f9801 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -458,22 +458,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register						*/
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
 
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
@@ -1319,7 +1319,7 @@
 #define	TWI_ENA		0x0080		/* TWI Enable									*/
 #define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001		/* Slave Enable									*/
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
@@ -1330,7 +1330,7 @@
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
 #define GCALL		0x0002		/* General Call Indicator						*/
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001		/* Master Mode Enable						*/
 #define	MADD_LEN	0x0002		/* Master Address Length					*/
 #define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
@@ -1576,114 +1576,6 @@
 
 #define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h
index bbab2d76499..9af6ce0f632 100644
--- a/arch/blackfin/mach-bf518/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf518/include/mach/gpio.h
@@ -7,48 +7,49 @@
 #ifndef _MACH_GPIO_H_
 #define _MACH_GPIO_H_
 
-#define MAX_BLACKFIN_GPIOS 40
+#define MAX_BLACKFIN_GPIOS 41
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index e352910f7f9..cd84a569b04 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 /* EMAC MII/RMII Port Mux */
 #define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
@@ -95,7 +95,7 @@
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
 #define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
-#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2))
 #define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
 
 #define P_SPI1_SS	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
@@ -109,6 +109,7 @@
 #define P_SPI1_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
 #define P_SPI1_SSEL5	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 /* SPORT Port Mux */
@@ -195,6 +196,6 @@
 #define P_AMS2			(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
 #define P_AMS3			(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2))
 
-#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+#define P_HWAIT			(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1))
 
 #endif				/* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 1f8cbe9d6b9..0ba54701af0 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -79,6 +79,72 @@ config BF527_NAND_D_PORTH
 	  PORT H
 endchoice
 
+comment "Hysteresis/Schmitt Trigger Control"
+config BFIN_HYSTERESIS_CONTROL
+	bool "Enable Hysteresis Control"
+	help
+	  The ADSP-BF52x allows to control input hysteresis for Port F,
+	  Port G and Port H and other processor signal inputs.
+	  The Schmitt trigger enables can be set only for pin groups.
+	  Saying Y will overwrite the default reset or boot loader
+	  initialization.
+
+menu "PORT F"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTF_0_7
+	bool "Enable Hysteresis on PORTF {0...7}"
+config GPIO_HYST_PORTF_8_9
+	bool "Enable Hysteresis on PORTF {8, 9}"
+config GPIO_HYST_PORTF_10
+	bool "Enable Hysteresis on PORTF 10"
+config GPIO_HYST_PORTF_11
+	bool "Enable Hysteresis on PORTF 11"
+config GPIO_HYST_PORTF_12_13
+	bool "Enable Hysteresis on PORTF {12, 13}"
+config GPIO_HYST_PORTF_14_15
+	bool "Enable Hysteresis on PORTF {14, 15}"
+endmenu
+
+menu "PORT G"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTG_0
+	bool "Enable Hysteresis on PORTG 0"
+config GPIO_HYST_PORTG_1_4
+	bool "Enable Hysteresis on PORTG {1...4}"
+config GPIO_HYST_PORTG_5_6
+	bool "Enable Hysteresis on PORTG {5, 6}"
+config GPIO_HYST_PORTG_7_8
+	bool "Enable Hysteresis on PORTG {7, 8}"
+config GPIO_HYST_PORTG_9
+	bool "Enable Hysteresis on PORTG 9"
+config GPIO_HYST_PORTG_10
+	bool "Enable Hysteresis on PORTG 10"
+config GPIO_HYST_PORTG_11_13
+	bool "Enable Hysteresis on PORTG {11...13}"
+config GPIO_HYST_PORTG_14_15
+	bool "Enable Hysteresis on PORTG {14, 15}"
+endmenu
+
+menu "PORT H"
+	depends on BFIN_HYSTERESIS_CONTROL
+config GPIO_HYST_PORTH_0_7
+	bool "Enable Hysteresis on PORTH {0...7}"
+config GPIO_HYST_PORTH_8
+	bool "Enable Hysteresis on PORTH 8"
+config GPIO_HYST_PORTH_9_15
+	bool "Enable Hysteresis on PORTH {9...15}"
+endmenu
+
+menu "None-GPIO"
+	depends on BFIN_HYSTERESIS_CONTROL
+config NONEGPIO_HYST_TMR0_FS1_PPICLK
+	bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
+config NONEGPIO_HYST_NMI_RST_BMODE
+	bool "Enable Hysteresis on {NMI, RESET, BMODE}"
+config NONEGPIO_HYST_JTAG
+	bool "Enable Hysteresis on JTAG"
+endmenu
+
 comment "Interrupt Priority Assignment"
 menu "Priority"
 
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 02040df8ec8..9358afa05c9 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -5,13 +5,13 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
+ *  - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List
  *  - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
@@ -41,7 +41,7 @@
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)	/* note: brokenness is noted in documentation, not anomaly sheet */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -168,6 +168,8 @@
 #define ANOMALY_05000431 (1)
 /* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
 #define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
+/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
+#define ANOMALY_05000434 (1)
 /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
 #define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
 /* Preboot Cannot be Used to Alter the PLL_DIV Register */
@@ -204,10 +206,22 @@
 #define ANOMALY_05000467 (1)
 /* PLL Latches Incorrect Settings During Reset */
 #define ANOMALY_05000469 (1)
+/* Incorrect Default MSEL Value in PLL_CTL */
+#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3))
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -223,6 +237,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -259,6 +274,5 @@
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
index ff68c889708..8ff155b34f6 100644
--- a/arch/blackfin/mach-bf527/include/mach/bf527.h
+++ b/arch/blackfin/mach-bf527/include/mach/bf527.h
@@ -85,6 +85,126 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN | V_CDPRIO)
 
+/**************************** Hysteresis Settings ****************************/
+
+#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL
+#ifdef CONFIG_GPIO_HYST_PORTF_0_7
+#define HYST_PORTF_0_7		(1 << 0)
+#else
+#define HYST_PORTF_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_8_9
+#define HYST_PORTF_8_9		(1 << 2)
+#else
+#define HYST_PORTF_8_9		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_10
+#define HYST_PORTF_10		(1 << 4)
+#else
+#define HYST_PORTF_10		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_11
+#define HYST_PORTF_11		(1 << 6)
+#else
+#define HYST_PORTF_11		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_12_13
+#define HYST_PORTF_12_13	(1 << 8)
+#else
+#define HYST_PORTF_12_13	(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTF_14_15
+#define HYST_PORTF_14_15	(1 << 10)
+#else
+#define HYST_PORTF_14_15	(0 << 10)
+#endif
+
+#define HYST_PORTF_0_15	(HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \
+		HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTG_0
+#define HYST_PORTG_0		(1 << 0)
+#else
+#define HYST_PORTG_0		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_1_4
+#define HYST_PORTG_1_4		(1 << 2)
+#else
+#define HYST_PORTG_1_4		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_5_6
+#define HYST_PORTG_5_6		(1 << 4)
+#else
+#define HYST_PORTG_5_6		(0 << 4)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_7_8
+#define HYST_PORTG_7_8		(1 << 6)
+#else
+#define HYST_PORTG_7_8		(0 << 6)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_9
+#define HYST_PORTG_9		(1 << 8)
+#else
+#define HYST_PORTG_9		(0 << 8)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_10
+#define HYST_PORTG_10		(1 << 10)
+#else
+#define HYST_PORTG_10		(0 << 10)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_11_13
+#define HYST_PORTG_11_13	(1 << 12)
+#else
+#define HYST_PORTG_11_13	(0 << 12)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTG_14_15
+#define HYST_PORTG_14_15	(1 << 14)
+#else
+#define HYST_PORTG_14_15	(0 << 14)
+#endif
+
+#define HYST_PORTG_0_15	(HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \
+		HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \
+		HYST_PORTG_11_13 | HYST_PORTG_14_15)
+
+#ifdef CONFIG_GPIO_HYST_PORTH_0_7
+#define HYST_PORTH_0_7		(1 << 0)
+#else
+#define HYST_PORTH_0_7		(0 << 0)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_8
+#define HYST_PORTH_8		(1 << 2)
+#else
+#define HYST_PORTH_8		(0 << 2)
+#endif
+#ifdef CONFIG_GPIO_HYST_PORTH_9_15
+#define HYST_PORTH_9_15		(1 << 4)
+#else
+#define HYST_PORTH_9_15		(0 << 4)
+#endif
+
+#define HYST_PORTH_0_15	(HYST_PORTH_0_7 | HYST_PORTH_8 | HYST_PORTH_9_15)
+
+#ifdef CONFIG_NONEGPIO_HYST_TMR0_FS1_PPICLK
+#define HYST_TMR0_FS1_PPICLK		(1 << 0)
+#else
+#define HYST_TMR0_FS1_PPICLK		(0 << 0)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE
+#define HYST_NMI_RST_BMODE		(1 << 2)
+#else
+#define HYST_NMI_RST_BMODE		(0 << 2)
+#endif
+#ifdef CONFIG_NONEGPIO_HYST_JTAG
+#define HYST_JTAG			(1 << 4)
+#else
+#define HYST_JTAG			(0 << 4)
+#endif
+
+#define HYST_NONEGPIO	(HYST_TMR0_FS1_PPICLK | HYST_NMI_RST_BMODE | HYST_JTAG)
+#define HYST_NONEGPIO_MASK		(0x3F)
+#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */
+
 #ifdef CONFIG_BF527
 #define CPU "BF527"
 #define CPUID 0x27e0
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 8b18b535921..5f97f01fcda 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -458,22 +458,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register						*/
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register			*/
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register						*/
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register				*/
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register				*/
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register				*/
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register				*/
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register				*/
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register				*/
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register			*/
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register		*/
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register					*/
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register						*/
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register	*/
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register	*/
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register	*/
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register	*/
 
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
@@ -1328,7 +1328,7 @@
 #define	TWI_ENA		0x0080		/* TWI Enable									*/
 #define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001		/* Slave Enable									*/
 #define	SADD_LEN	0x0002		/* Slave Address Length							*/
 #define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
@@ -1339,7 +1339,7 @@
 #define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
 #define GCALL		0x0002		/* General Call Indicator						*/
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001		/* Master Mode Enable						*/
 #define	MADD_LEN	0x0002		/* Master Address Length					*/
 #define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
@@ -1589,114 +1589,6 @@
 
 #define             HOST_COUNT_TIMEOUT  0x7ff      /* Host Timeout count */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -1738,85 +1630,4 @@
 #define                   nAFEXIT  0x0
 #define                   SECSTAT  0xe0       /* Secure Status */
 
-/* Bit masks for NFC_CTL */
-
-#define                    WR_DLY  0xf        /* Write Strobe Delay */
-#define                    RD_DLY  0xf0       /* Read Strobe Delay */
-#define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0
-#define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0
-
-/* Bit masks for NFC_STAT */
-
-#define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0
-#define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0
-#define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0
-#define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0
-#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0
-#define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0
-#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0
-#define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0
-#define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0
-
-/* Bit masks for NFC_IRQMASK */
-
-#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0
-#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0
-#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0
-#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0
-#define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0
-
-/* Bit masks for NFC_RST */
-
-#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0
-
-/* Bit masks for NFC_PGCTL */
-
-#define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0
-#define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0
-
-/* Bit masks for NFC_ECC0 */
-
-#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define                    ECCCNT  0x3ff      /* Transfer Count */
-
-
 #endif /* _DEF_BF52X_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/gpio.h b/arch/blackfin/mach-bf527/include/mach/gpio.h
index 104bff85290..f80c2995efd 100644
--- a/arch/blackfin/mach-bf527/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf527/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
-#define	GPIO_PH8	40
-#define	GPIO_PH9	41
-#define	GPIO_PH10      	42
-#define	GPIO_PH11      	43
-#define	GPIO_PH12      	44
-#define	GPIO_PH13      	45
-#define	GPIO_PH14      	46
-#define	GPIO_PH15      	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index d4518b6f4ad..08bae421f5c 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
@@ -79,6 +79,7 @@
 
 #define P_HWAIT		(P_DONTCARE)
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG1
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 9b3f7a27714..78f87218791 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -208,8 +208,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -358,6 +364,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/gpio.h b/arch/blackfin/mach-bf533/include/mach/gpio.h
index 2af19d69a7a..e02416db4b0 100644
--- a/arch/blackfin/mach-bf533/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf533/include/mach/gpio.h
@@ -9,22 +9,22 @@
 
 #define MAX_BLACKFIN_GPIOS 16
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
 
 #define PORT_F GPIO_PF0
 
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 075dae1af16..96f5d9129f2 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_CLK	(P_DONTCARE)
 #define P_PPI0_FS1	(P_DONTCARE)
@@ -60,6 +60,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #define P_TMR2		(P_DONTCARE)
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index d2c427bc665..43df6afd22a 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -162,8 +162,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -179,6 +185,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
@@ -211,6 +218,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cf396ea4009..aad61b88737 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -434,22 +434,22 @@
 
 /* Two-Wire Interface		(0xFFC01400 - 0xFFC014FF)								*/
 #define TWI0_REGBASE			0xFFC01400
-#define TWI_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
-#define TWI_CONTROL			0xFFC01404	/* TWI Control Register                                         */
-#define TWI_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
-#define TWI_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
-#define TWI_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
-#define TWI_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
-#define TWI_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
-#define TWI_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
-#define TWI_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
-#define TWI_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
-#define TWI_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
-#define TWI_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
-#define TWI_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
-#define TWI_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
-#define TWI_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
-#define TWI_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
+#define TWI0_CLKDIV			0xFFC01400	/* Serial Clock Divider Register                        */
+#define TWI0_CONTROL			0xFFC01404	/* TWI Control Register                                         */
+#define TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register                          */
+#define TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register                           */
+#define TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register                          */
+#define TWI0_MASTER_CTL		0xFFC01414	/* Master Mode Control Register                         */
+#define TWI0_MASTER_STAT		0xFFC01418	/* Master Mode Status Register                          */
+#define TWI0_MASTER_ADDR		0xFFC0141C	/* Master Mode Address Register                         */
+#define TWI0_INT_STAT		0xFFC01420	/* TWI Interrupt Status Register                        */
+#define TWI0_INT_MASK		0xFFC01424	/* TWI Master Interrupt Mask Register           */
+#define TWI0_FIFO_CTL		0xFFC01428	/* FIFO Control Register                                        */
+#define TWI0_FIFO_STAT		0xFFC0142C	/* FIFO Status Register                                         */
+#define TWI0_XMT_DATA8		0xFFC01480	/* FIFO Transmit Data Single Byte Register      */
+#define TWI0_XMT_DATA16		0xFFC01484	/* FIFO Transmit Data Double Byte Register      */
+#define TWI0_RCV_DATA8		0xFFC01488	/* FIFO Receive Data Single Byte Register       */
+#define TWI0_RCV_DATA16		0xFFC0148C	/* FIFO Receive Data Double Byte Register       */
 
 /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF)												*/
 #define PORTGIO					0xFFC01500	/* Port G I/O Pin State Specify Register                                */
@@ -1642,7 +1642,7 @@
 #define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
 #define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
 
-/* TWI_SLAVE_CTRL Masks															*/
+/* TWI_SLAVE_CTL Masks															*/
 #define	SEN			0x0001	/* Slave Enable                                                                 */
 #define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
 #define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
@@ -1653,7 +1653,7 @@
 #define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
 #define GCALL		0x0002	/* General Call Indicator                                               */
 
-/* TWI_MASTER_CTRL Masks													*/
+/* TWI_MASTER_CTL Masks													*/
 #define	MEN			0x0001	/* Master Mode Enable                                           */
 #define	MADD_LEN	0x0002	/* Master Address Length                                        */
 #define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h
index 104bff85290..f80c2995efd 100644
--- a/arch/blackfin/mach-bf537/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PG0	16
-#define	GPIO_PG1	17
-#define	GPIO_PG2	18
-#define	GPIO_PG3	19
-#define	GPIO_PG4	20
-#define	GPIO_PG5	21
-#define	GPIO_PG6	22
-#define	GPIO_PG7	23
-#define	GPIO_PG8	24
-#define	GPIO_PG9	25
-#define	GPIO_PG10      	26
-#define	GPIO_PG11      	27
-#define	GPIO_PG12      	28
-#define	GPIO_PG13      	29
-#define	GPIO_PG14      	30
-#define	GPIO_PG15      	31
-#define	GPIO_PH0	32
-#define	GPIO_PH1	33
-#define	GPIO_PH2	34
-#define	GPIO_PH3	35
-#define	GPIO_PH4	36
-#define	GPIO_PH5	37
-#define	GPIO_PH6	38
-#define	GPIO_PH7	39
-#define	GPIO_PH8	40
-#define	GPIO_PH9	41
-#define	GPIO_PH10      	42
-#define	GPIO_PH11      	43
-#define	GPIO_PH12      	44
-#define	GPIO_PH13      	45
-#define	GPIO_PH14      	46
-#define	GPIO_PH15      	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PG0	16
+#define GPIO_PG1	17
+#define GPIO_PG2	18
+#define GPIO_PG3	19
+#define GPIO_PG4	20
+#define GPIO_PG5	21
+#define GPIO_PG6	22
+#define GPIO_PG7	23
+#define GPIO_PG8	24
+#define GPIO_PG9	25
+#define GPIO_PG10	26
+#define GPIO_PG11	27
+#define GPIO_PG12	28
+#define GPIO_PG13	29
+#define GPIO_PG14	30
+#define GPIO_PG15	31
+#define GPIO_PH0	32
+#define GPIO_PH1	33
+#define GPIO_PH2	34
+#define GPIO_PH3	35
+#define GPIO_PH4	36
+#define GPIO_PH5	37
+#define GPIO_PH6	38
+#define GPIO_PH7	39
+#define GPIO_PH8	40
+#define GPIO_PH9	41
+#define GPIO_PH10	42
+#define GPIO_PH11	43
+#define GPIO_PH12	44
+#define GPIO_PH13	45
+#define GPIO_PH14	46
+#define GPIO_PH15	47
 
 #define PORT_F GPIO_PF0
 #define PORT_G GPIO_PG0
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index da9760329e4..71d9eaeb579 100644
--- a/arch/blackfin/mach-bf537/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
+#define MAX_RESOURCES	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
 
 #define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
@@ -37,6 +37,7 @@
 #define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
 #define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
 #define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF10
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 
 #define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
@@ -135,7 +136,6 @@
 	P_MDC, \
 	P_MDIO, 0}
 
-
 #define P_RMII0 {\
 	P_MII0_ETxD0, \
 	P_MII0_ETxD1, \
@@ -148,4 +148,5 @@
 	P_RMII0_CRS_DV, \
 	P_MDC, \
 	P_MDIO, 0}
-#endif			        	/* _MACH_PORTMUX_H_ */
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index d882b7e6f59..8774b481c78 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -5,14 +5,14 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
- *  - Revision G, 09/18/2008; ADSP-BF538/BF538F Blackfin Processor Anomaly List
- *  - Revision L, 09/18/2008; ADSP-BF539/BF539F Blackfin Processor Anomaly List
+ *  - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List
+ *  - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -132,10 +132,18 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
+#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -185,6 +193,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
-#define ANOMALY_05000475 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
index 401ebd79d0a..66aa722cf6c 100644
--- a/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/cdefBF538.h
@@ -1293,70 +1293,6 @@
 #define bfin_write_PPI_COUNT(val)      bfin_write16(PPI_COUNT, val)
 #define bfin_read_PPI_FRAME()          bfin_read16(PPI_FRAME)
 #define bfin_write_PPI_FRAME(val)      bfin_write16(PPI_FRAME, val)
-#define bfin_read_TWI0_CLKDIV()        bfin_read16(TWI0_CLKDIV)
-#define bfin_write_TWI0_CLKDIV(val)    bfin_write16(TWI0_CLKDIV, val)
-#define bfin_read_TWI0_CONTROL()       bfin_read16(TWI0_CONTROL)
-#define bfin_write_TWI0_CONTROL(val)   bfin_write16(TWI0_CONTROL, val)
-#define bfin_read_TWI0_SLAVE_CTRL()    bfin_read16(TWI0_SLAVE_CTRL)
-#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
-#define bfin_read_TWI0_SLAVE_STAT()    bfin_read16(TWI0_SLAVE_STAT)
-#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
-#define bfin_read_TWI0_SLAVE_ADDR()    bfin_read16(TWI0_SLAVE_ADDR)
-#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
-#define bfin_read_TWI0_MASTER_CTL()    bfin_read16(TWI0_MASTER_CTL)
-#define bfin_write_TWI0_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTL, val)
-#define bfin_read_TWI0_MASTER_STAT()   bfin_read16(TWI0_MASTER_STAT)
-#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
-#define bfin_read_TWI0_MASTER_ADDR()   bfin_read16(TWI0_MASTER_ADDR)
-#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
-#define bfin_read_TWI0_INT_STAT()      bfin_read16(TWI0_INT_STAT)
-#define bfin_write_TWI0_INT_STAT(val)  bfin_write16(TWI0_INT_STAT, val)
-#define bfin_read_TWI0_INT_MASK()      bfin_read16(TWI0_INT_MASK)
-#define bfin_write_TWI0_INT_MASK(val)  bfin_write16(TWI0_INT_MASK, val)
-#define bfin_read_TWI0_FIFO_CTL()      bfin_read16(TWI0_FIFO_CTL)
-#define bfin_write_TWI0_FIFO_CTL(val)  bfin_write16(TWI0_FIFO_CTL, val)
-#define bfin_read_TWI0_FIFO_STAT()     bfin_read16(TWI0_FIFO_STAT)
-#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
-#define bfin_read_TWI0_XMT_DATA8()     bfin_read16(TWI0_XMT_DATA8)
-#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
-#define bfin_read_TWI0_XMT_DATA16()    bfin_read16(TWI0_XMT_DATA16)
-#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
-#define bfin_read_TWI0_RCV_DATA8()     bfin_read16(TWI0_RCV_DATA8)
-#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
-#define bfin_read_TWI0_RCV_DATA16()    bfin_read16(TWI0_RCV_DATA16)
-#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
-#define bfin_read_TWI1_CLKDIV()        bfin_read16(TWI1_CLKDIV)
-#define bfin_write_TWI1_CLKDIV(val)    bfin_write16(TWI1_CLKDIV, val)
-#define bfin_read_TWI1_CONTROL()       bfin_read16(TWI1_CONTROL)
-#define bfin_write_TWI1_CONTROL(val)   bfin_write16(TWI1_CONTROL, val)
-#define bfin_read_TWI1_SLAVE_CTRL()    bfin_read16(TWI1_SLAVE_CTRL)
-#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val)
-#define bfin_read_TWI1_SLAVE_STAT()    bfin_read16(TWI1_SLAVE_STAT)
-#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val)
-#define bfin_read_TWI1_SLAVE_ADDR()    bfin_read16(TWI1_SLAVE_ADDR)
-#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val)
-#define bfin_read_TWI1_MASTER_CTL()    bfin_read16(TWI1_MASTER_CTL)
-#define bfin_write_TWI1_MASTER_CTL(val) bfin_write16(TWI1_MASTER_CTL, val)
-#define bfin_read_TWI1_MASTER_STAT()   bfin_read16(TWI1_MASTER_STAT)
-#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val)
-#define bfin_read_TWI1_MASTER_ADDR()   bfin_read16(TWI1_MASTER_ADDR)
-#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val)
-#define bfin_read_TWI1_INT_STAT()      bfin_read16(TWI1_INT_STAT)
-#define bfin_write_TWI1_INT_STAT(val)  bfin_write16(TWI1_INT_STAT, val)
-#define bfin_read_TWI1_INT_MASK()      bfin_read16(TWI1_INT_MASK)
-#define bfin_write_TWI1_INT_MASK(val)  bfin_write16(TWI1_INT_MASK, val)
-#define bfin_read_TWI1_FIFO_CTL()      bfin_read16(TWI1_FIFO_CTL)
-#define bfin_write_TWI1_FIFO_CTL(val)  bfin_write16(TWI1_FIFO_CTL, val)
-#define bfin_read_TWI1_FIFO_STAT()     bfin_read16(TWI1_FIFO_STAT)
-#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val)
-#define bfin_read_TWI1_XMT_DATA8()     bfin_read16(TWI1_XMT_DATA8)
-#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val)
-#define bfin_read_TWI1_XMT_DATA16()    bfin_read16(TWI1_XMT_DATA16)
-#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val)
-#define bfin_read_TWI1_RCV_DATA8()     bfin_read16(TWI1_RCV_DATA8)
-#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val)
-#define bfin_read_TWI1_RCV_DATA16()    bfin_read16(TWI1_RCV_DATA16)
-#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val)
 #define bfin_read_CAN_MC1()            bfin_read16(CAN_MC1)
 #define bfin_write_CAN_MC1(val)        bfin_write16(CAN_MC1, val)
 #define bfin_read_CAN_MD1()            bfin_read16(CAN_MD1)
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index d7061d9f2a8..b674a1c4aef 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -442,15 +442,15 @@
 /* Two-Wire Interface 0	(0xFFC01400 - 0xFFC014FF)			 */
 #define	TWI0_CLKDIV			0xFFC01400	/* Serial Clock	Divider	Register */
 #define	TWI0_CONTROL		0xFFC01404	/* TWI0	Master Internal	Time Reference Register */
-#define	TWI0_SLAVE_CTRL		0xFFC01408	/* Slave Mode Control Register */
+#define	TWI0_SLAVE_CTL		0xFFC01408	/* Slave Mode Control Register */
 #define	TWI0_SLAVE_STAT		0xFFC0140C	/* Slave Mode Status Register */
 #define	TWI0_SLAVE_ADDR		0xFFC01410	/* Slave Mode Address Register */
-#define	TWI0_MASTER_CTRL	0xFFC01414	/* Master Mode Control Register */
+#define	TWI0_MASTER_CTL	0xFFC01414	/* Master Mode Control Register */
 #define	TWI0_MASTER_STAT	0xFFC01418	/* Master Mode Status Register */
 #define	TWI0_MASTER_ADDR	0xFFC0141C	/* Master Mode Address Register */
 #define	TWI0_INT_STAT		0xFFC01420	/* TWI0	Master Interrupt Register */
 #define	TWI0_INT_MASK		0xFFC01424	/* TWI0	Master Interrupt Mask Register */
-#define	TWI0_FIFO_CTRL		0xFFC01428	/* FIFO	Control	Register */
+#define	TWI0_FIFO_CTL		0xFFC01428	/* FIFO	Control	Register */
 #define	TWI0_FIFO_STAT		0xFFC0142C	/* FIFO	Status Register */
 #define	TWI0_XMT_DATA8		0xFFC01480	/* FIFO	Transmit Data Single Byte Register */
 #define	TWI0_XMT_DATA16		0xFFC01484	/* FIFO	Transmit Data Double Byte Register */
@@ -761,15 +761,15 @@
 /* Two-Wire Interface 1	(0xFFC02200 - 0xFFC022FF)			 */
 #define	TWI1_CLKDIV			0xFFC02200	/* Serial Clock	Divider	Register */
 #define	TWI1_CONTROL		0xFFC02204	/* TWI1	Master Internal	Time Reference Register */
-#define	TWI1_SLAVE_CTRL		0xFFC02208	/* Slave Mode Control Register */
+#define	TWI1_SLAVE_CTL		0xFFC02208	/* Slave Mode Control Register */
 #define	TWI1_SLAVE_STAT		0xFFC0220C	/* Slave Mode Status Register */
 #define	TWI1_SLAVE_ADDR		0xFFC02210	/* Slave Mode Address Register */
-#define	TWI1_MASTER_CTRL	0xFFC02214	/* Master Mode Control Register */
+#define	TWI1_MASTER_CTL	0xFFC02214	/* Master Mode Control Register */
 #define	TWI1_MASTER_STAT	0xFFC02218	/* Master Mode Status Register */
 #define	TWI1_MASTER_ADDR	0xFFC0221C	/* Master Mode Address Register */
 #define	TWI1_INT_STAT		0xFFC02220	/* TWI1	Master Interrupt Register */
 #define	TWI1_INT_MASK		0xFFC02224	/* TWI1	Master Interrupt Mask Register */
-#define	TWI1_FIFO_CTRL		0xFFC02228	/* FIFO	Control	Register */
+#define	TWI1_FIFO_CTL		0xFFC02228	/* FIFO	Control	Register */
 #define	TWI1_FIFO_STAT		0xFFC0222C	/* FIFO	Status Register */
 #define	TWI1_XMT_DATA8		0xFFC02280	/* FIFO	Transmit Data Single Byte Register */
 #define	TWI1_XMT_DATA16		0xFFC02284	/* FIFO	Transmit Data Double Byte Register */
@@ -2401,7 +2401,7 @@
 #define	XMTSERV		0x0040		/* Transmit FIFO Service */
 #define	RCVSERV		0x0080		/* Receive FIFO	Service */
 
-/* TWIx_FIFO_CTRL Masks					 */
+/* TWIx_FIFO_CTL Masks					 */
 #define	XMTFLUSH	0x0001		/* Transmit Buffer Flush */
 #define	RCVFLUSH	0x0002		/* Receive Buffer Flush */
 #define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length */
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 0c346fba961..bd9adb7183d 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -10,60 +10,60 @@
 #define MAX_BLACKFIN_GPIOS 16
 #define BFIN_SPECIAL_GPIO_BANKS 3
 
-#define	GPIO_PF0	0	/* PF */
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PC0	16	/* PC */
-#define	GPIO_PC1	17
-#define	GPIO_PC4	20
-#define	GPIO_PC5	21
-#define	GPIO_PC6	22
-#define	GPIO_PC7	23
-#define	GPIO_PC8	24
-#define	GPIO_PC9	25
-#define	GPIO_PD0	32	/* PD */
-#define	GPIO_PD1	33
-#define	GPIO_PD2	34
-#define	GPIO_PD3	35
-#define	GPIO_PD4	36
-#define	GPIO_PD5	37
-#define	GPIO_PD6	38
-#define	GPIO_PD7	39
-#define	GPIO_PD8	40
-#define	GPIO_PD9	41
-#define	GPIO_PD10      	42
-#define	GPIO_PD11      	43
-#define	GPIO_PD12      	44
-#define	GPIO_PD13      	45
-#define	GPIO_PE0	48	/* PE */
-#define	GPIO_PE1	49
-#define	GPIO_PE2	50
-#define	GPIO_PE3	51
-#define	GPIO_PE4	52
-#define	GPIO_PE5	53
-#define	GPIO_PE6	54
-#define	GPIO_PE7	55
-#define	GPIO_PE8	56
-#define	GPIO_PE9	57
-#define	GPIO_PE10      	58
-#define	GPIO_PE11      	59
-#define	GPIO_PE12      	60
-#define	GPIO_PE13      	61
-#define	GPIO_PE14      	62
-#define	GPIO_PE15      	63
+#define GPIO_PF0	0	/* PF */
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PC0	16	/* PC */
+#define GPIO_PC1	17
+#define GPIO_PC4	20
+#define GPIO_PC5	21
+#define GPIO_PC6	22
+#define GPIO_PC7	23
+#define GPIO_PC8	24
+#define GPIO_PC9	25
+#define GPIO_PD0	32	/* PD */
+#define GPIO_PD1	33
+#define GPIO_PD2	34
+#define GPIO_PD3	35
+#define GPIO_PD4	36
+#define GPIO_PD5	37
+#define GPIO_PD6	38
+#define GPIO_PD7	39
+#define GPIO_PD8	40
+#define GPIO_PD9	41
+#define GPIO_PD10	42
+#define GPIO_PD11	43
+#define GPIO_PD12	44
+#define GPIO_PD13	45
+#define GPIO_PE0	48	/* PE */
+#define GPIO_PE1	49
+#define GPIO_PE2	50
+#define GPIO_PE3	51
+#define GPIO_PE4	52
+#define GPIO_PE5	53
+#define GPIO_PE6	54
+#define GPIO_PE7	55
+#define GPIO_PE8	56
+#define GPIO_PE9	57
+#define GPIO_PE10	58
+#define GPIO_PE11	59
+#define GPIO_PE12	60
+#define GPIO_PE13	61
+#define GPIO_PE14	62
+#define GPIO_PE15	63
 
 #define PORT_F GPIO_PF0
 #define PORT_C GPIO_PC0
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index 0083ba13ee9..b773c5fdbc7 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -108,6 +108,7 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
 #define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
 #define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 7d08c752449..4070079e2c0 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -28,7 +28,7 @@
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
 #define ANOMALY_05000220 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
@@ -210,10 +210,16 @@
 #define ANOMALY_05000473 (1)
 /* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
 #define ANOMALY_05000474 (1)
-/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
-#define ANOMALY_05000475 (1)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
+#define ANOMALY_05000483 (1)
+/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
+#define ANOMALY_05000485 (__SILICON_REVISION__ >= 2)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -229,6 +235,7 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
+#define ANOMALY_05000219 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
@@ -263,5 +270,6 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index 32f71e6a7c1..ea3ec4ea9e2 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -301,10 +301,10 @@
 
 /* DMAC0 Registers */
 
-#define bfin_read_DMAC0_TCPER()		bfin_read16(DMAC0_TCPER)
-#define bfin_write_DMAC0_TCPER(val)	bfin_write16(DMAC0_TCPER, val)
-#define bfin_read_DMAC0_TCCNT()		bfin_read16(DMAC0_TCCNT)
-#define bfin_write_DMAC0_TCCNT(val)	bfin_write16(DMAC0_TCCNT, val)
+#define bfin_read_DMAC0_TC_PER()		bfin_read16(DMAC0_TC_PER)
+#define bfin_write_DMAC0_TC_PER(val)	bfin_write16(DMAC0_TC_PER, val)
+#define bfin_read_DMAC0_TC_CNT()		bfin_read16(DMAC0_TC_CNT)
+#define bfin_write_DMAC0_TC_CNT(val)	bfin_write16(DMAC0_TC_CNT, val)
 
 /* DMA Channel 0 Registers */
 
@@ -1155,10 +1155,10 @@
 
 /* DMAC1 Registers */
 
-#define bfin_read_DMAC1_TCPER()			bfin_read16(DMAC1_TCPER)
-#define bfin_write_DMAC1_TCPER(val)		bfin_write16(DMAC1_TCPER, val)
-#define bfin_read_DMAC1_TCCNT()			bfin_read16(DMAC1_TCCNT)
-#define bfin_write_DMAC1_TCCNT(val)		bfin_write16(DMAC1_TCCNT, val)
+#define bfin_read_DMAC1_TC_PER()			bfin_read16(DMAC1_TC_PER)
+#define bfin_write_DMAC1_TC_PER(val)		bfin_write16(DMAC1_TC_PER, val)
+#define bfin_read_DMAC1_TC_CNT()			bfin_read16(DMAC1_TC_CNT)
+#define bfin_write_DMAC1_TC_CNT(val)		bfin_write16(DMAC1_TC_CNT, val)
 
 /* DMA Channel 12 Registers */
 
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index d3bc6d1df54..abf5f750dd8 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -366,136 +366,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index f916c52a148..e2771094de0 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -60,15 +60,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 72c343646b2..be21ba5b3aa 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -99,15 +99,15 @@
 #define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
-#define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
+#define                   TWI1_SLAVE_CTL  0xffc02208   /* TWI Slave Mode Control Register */
 #define                  TWI1_SLAVE_STAT  0xffc0220c   /* TWI Slave Mode Status Register */
 #define                  TWI1_SLAVE_ADDR  0xffc02210   /* TWI Slave Mode Address Register */
-#define                 TWI1_MASTER_CTRL  0xffc02214   /* TWI Master Mode Control Register */
+#define                  TWI1_MASTER_CTL  0xffc02214   /* TWI Master Mode Control Register */
 #define                 TWI1_MASTER_STAT  0xffc02218   /* TWI Master Mode Status Register */
 #define                 TWI1_MASTER_ADDR  0xffc0221c   /* TWI Master Mode Address Register */
 #define                    TWI1_INT_STAT  0xffc02220   /* TWI Interrupt Status Register */
 #define                    TWI1_INT_MASK  0xffc02224   /* TWI Interrupt Mask Register */
-#define                   TWI1_FIFO_CTRL  0xffc02228   /* TWI FIFO Control Register */
+#define                    TWI1_FIFO_CTL  0xffc02228   /* TWI FIFO Control Register */
 #define                   TWI1_FIFO_STAT  0xffc0222c   /* TWI FIFO Status Register */
 #define                   TWI1_XMT_DATA8  0xffc02280   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI1_XMT_DATA16  0xffc02284   /* TWI FIFO Transmit Data Double Byte Register */
@@ -646,136 +646,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 0ed06c2366f..95ff44601fd 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -105,15 +105,15 @@
 #define                     TWI0_REGBASE  0xffc00700
 #define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
 #define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
-#define                  TWI0_SLAVE_CTRL  0xffc00708   /* TWI Slave Mode Control Register */
+#define                   TWI0_SLAVE_CTL  0xffc00708   /* TWI Slave Mode Control Register */
 #define                  TWI0_SLAVE_STAT  0xffc0070c   /* TWI Slave Mode Status Register */
 #define                  TWI0_SLAVE_ADDR  0xffc00710   /* TWI Slave Mode Address Register */
-#define                 TWI0_MASTER_CTRL  0xffc00714   /* TWI Master Mode Control Register */
+#define                  TWI0_MASTER_CTL  0xffc00714   /* TWI Master Mode Control Register */
 #define                 TWI0_MASTER_STAT  0xffc00718   /* TWI Master Mode Status Register */
 #define                 TWI0_MASTER_ADDR  0xffc0071c   /* TWI Master Mode Address Register */
 #define                    TWI0_INT_STAT  0xffc00720   /* TWI Interrupt Status Register */
 #define                    TWI0_INT_MASK  0xffc00724   /* TWI Interrupt Mask Register */
-#define                   TWI0_FIFO_CTRL  0xffc00728   /* TWI FIFO Control Register */
+#define                    TWI0_FIFO_CTL  0xffc00728   /* TWI FIFO Control Register */
 #define                   TWI0_FIFO_STAT  0xffc0072c   /* TWI FIFO Status Register */
 #define                   TWI0_XMT_DATA8  0xffc00780   /* TWI FIFO Transmit Data Single Byte Register */
 #define                  TWI0_XMT_DATA16  0xffc00784   /* TWI FIFO Transmit Data Double Byte Register */
@@ -198,8 +198,8 @@
 
 /* DMAC0 Registers */
 
-#define                      DMAC0_TCPER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
-#define                      DMAC0_TCCNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
+#define                     DMAC0_TC_PER  0xffc00b0c   /* DMA Controller 0 Traffic Control Periods Register */
+#define                     DMAC0_TC_CNT  0xffc00b10   /* DMA Controller 0 Current Counts Register */
 
 /* DMA Channel 0 Registers */
 
@@ -688,8 +688,8 @@
 
 /* DMAC1 Registers */
 
-#define                      DMAC1_TCPER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
-#define                      DMAC1_TCCNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
+#define                     DMAC1_TC_PER  0xffc01b0c   /* DMA Controller 1 Traffic Control Periods Register */
+#define                     DMAC1_TC_CNT  0xffc01b10   /* DMA Controller 1 Current Counts Register */
 
 /* DMA Channel 12 Registers */
 
@@ -1958,57 +1958,6 @@
 #define                     TRUN6  0x40000000 /* Timer 6 Slave Enable Status */
 #define                     TRUN7  0x80000000 /* Timer 7 Slave Enable Status */
 
-/* Bit masks for CNT_CONFIG */
-
-#define                      CNTE  0x1        /* Counter Enable */
-#define                      DEBE  0x2        /* Debounce Enable */
-#define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   CNTMODE  0x700      /* Counter Operating Mode */
-#define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                   BNDMODE  0x3000     /* Boundary register Mode */
-#define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-
-/* Bit masks for CNT_IMASK */
-
-#define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-
-/* Bit masks for CNT_STATUS */
-
-#define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-
-/* Bit masks for CNT_COMMAND */
-
-#define                    W1LCNT  0xf        /* Load Counter Register */
-#define                    W1LMIN  0xf0       /* Load Min Register */
-#define                    W1LMAX  0xf00      /* Load Max Register */
-#define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-
-/* Bit masks for CNT_DEBOUNCE */
-
-#define                 DPRESCALE  0xf        /* Load Counter Register */
-
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
@@ -2044,66 +1993,6 @@
 #define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
 #define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
 
-/* Bit masks for NFC_CTL */
-
-#define                    WR_DLY  0xf        /* Write Strobe Delay */
-#define                    RD_DLY  0xf0       /* Read Strobe Delay */
-#define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   PG_SIZE  0x200      /* Page Size */
-
-/* Bit masks for NFC_STAT */
-
-#define                     NBUSY  0x1        /* Not Busy */
-#define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-
-/* Bit masks for NFC_IRQSTAT */
-
-#define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   WR_DONE  0x10       /* Page Write Done */
-
-/* Bit masks for NFC_IRQMASK */
-
-#define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               MASK_WRDONE  0x10       /* Mask Write Done */
-
-/* Bit masks for NFC_RST */
-
-#define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-
-/* Bit masks for NFC_PGCTL */
-
-#define               PG_RD_START  0x1        /* Page Read Start */
-#define               PG_WR_START  0x2        /* Page Write Start */
-
-/* Bit masks for NFC_ECC0 */
-
-#define                      ECC0  0x7ff      /* Parity Calculation Result0 */
-
-/* Bit masks for NFC_ECC1 */
-
-#define                      ECC1  0x7ff      /* Parity Calculation Result1 */
-
-/* Bit masks for NFC_ECC2 */
-
-#define                      ECC2  0x7ff      /* Parity Calculation Result2 */
-
-/* Bit masks for NFC_ECC3 */
-
-#define                      ECC3  0x7ff      /* Parity Calculation Result3 */
-
-/* Bit masks for NFC_COUNT */
-
-#define                    ECCCNT  0x3ff      /* Transfer Count */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
@@ -2472,33 +2361,6 @@
 #define BCODE_QUICKBOOT 0x0020  /* always perform quick boot */
 #define BCODE_NOBOOT    0x0030  /* always perform full boot */
 
-/* CNT_COMMAND bit field options */
-
-#define W1LCNT_ZERO   0x0001   /* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN    0x0004   /* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX    0x0008   /* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO   0x0010   /* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT    0x0020   /* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX    0x0080   /* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO   0x0100   /* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT    0x0200   /* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN    0x0400   /* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_CONFIG bit field options */
-
-#define CNTMODE_QUADENC  0x0000  /* quadrature encoder mode */
-#define CNTMODE_BINENC   0x0100  /* binary encoder mode */
-#define CNTMODE_UDCNT    0x0200  /* up/down counter mode */
-#define CNTMODE_DIRCNT   0x0400  /* direction counter mode */
-#define CNTMODE_DIRTMR   0x0500  /* direction timer mode */
-
-#define BNDMODE_COMP     0x0000  /* boundary compare mode */
-#define BNDMODE_ZERO     0x1000  /* boundary compare and zero mode */
-#define BNDMODE_CAPT     0x2000  /* boundary capture mode */
-#define BNDMODE_AEXT     0x3000  /* boundary auto-extend mode */
-
 /* TMODE in TIMERx_CONFIG bit field options */
 
 #define PWM_OUT  0x0001
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index 850e39d193e..28037e33196 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -3,6 +3,10 @@
  * Licensed under the GPL-2 or later.
  */
 
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
 #define GPIO_PA0	0
 #define GPIO_PA1	1
 #define GPIO_PA2	2
@@ -166,6 +170,8 @@
 
 #define MAX_BLACKFIN_GPIOS 160
 
+#ifndef __ASSEMBLY__
+
 struct gpio_port_t {
 	unsigned short port_fer;
 	unsigned short dummy1;
@@ -191,3 +197,7 @@ struct gpio_port_s {
 	unsigned short inen;
 	unsigned int mux;
 };
+
+#endif
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 89ad6a88636..e2224620273 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_SPORT2_TFS	(P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
 #define P_SPORT2_DTSEC	(P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
@@ -131,6 +131,7 @@
 #define P_KEY_COL2	(P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
 #define P_KEY_COL3	(P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
 
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PE4
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
 #define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
 #define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 5ddc981e993..4c108c99cb6 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -5,7 +5,7 @@
  * and can be replaced with that version at any time
  * DO NOT EDIT THIS FILE
  *
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  * Licensed under the ADI BSD license.
  *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
@@ -152,8 +152,8 @@
 #define ANOMALY_05000215 (__SILICON_REVISION__ < 5)
 /* NMI Event at Boot Time Results in Unpredictable State */
 #define ANOMALY_05000219 (__SILICON_REVISION__ < 5)
-/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
-#define ANOMALY_05000220 (__SILICON_REVISION__ < 5)
+/* Data Corruption/Core Hang with L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000220 (__SILICON_REVISION__ < 4)
 /* Incorrect Pulse-Width of UART Start Bit */
 #define ANOMALY_05000225 (__SILICON_REVISION__ < 5)
 /* Scratchpad Memory Bank Reads May Return Incorrect Data */
@@ -290,10 +290,14 @@
 #define ANOMALY_05000461 (1)
 /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
 #define ANOMALY_05000473 (1)
-/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+/* Possible Lockup Condition whem Modifying PLL from External Memory */
 #define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
 /* TESTSET Instruction Cannot Be Interrupted */
 #define ANOMALY_05000477 (1)
+/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
+#define ANOMALY_05000481 (1)
+/* IFLUSH sucks at life */
+#define ANOMALY_05000491 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000119 (0)
@@ -319,5 +323,6 @@
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
 #define ANOMALY_05000474 (0)
+#define ANOMALY_05000485 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/gpio.h b/arch/blackfin/mach-bf561/include/mach/gpio.h
index a651a8cf805..4f8aa5d0880 100644
--- a/arch/blackfin/mach-bf561/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf561/include/mach/gpio.h
@@ -9,54 +9,54 @@
 
 #define MAX_BLACKFIN_GPIOS 48
 
-#define	GPIO_PF0	0
-#define	GPIO_PF1	1
-#define	GPIO_PF2	2
-#define	GPIO_PF3	3
-#define	GPIO_PF4	4
-#define	GPIO_PF5	5
-#define	GPIO_PF6	6
-#define	GPIO_PF7	7
-#define	GPIO_PF8	8
-#define	GPIO_PF9	9
-#define	GPIO_PF10	10
-#define	GPIO_PF11	11
-#define	GPIO_PF12	12
-#define	GPIO_PF13	13
-#define	GPIO_PF14	14
-#define	GPIO_PF15	15
-#define	GPIO_PF16	16
-#define	GPIO_PF17	17
-#define	GPIO_PF18	18
-#define	GPIO_PF19	19
-#define	GPIO_PF20	20
-#define	GPIO_PF21	21
-#define	GPIO_PF22	22
-#define	GPIO_PF23	23
-#define	GPIO_PF24	24
-#define	GPIO_PF25	25
-#define	GPIO_PF26	26
-#define	GPIO_PF27	27
-#define	GPIO_PF28	28
-#define	GPIO_PF29	29
-#define	GPIO_PF30	30
-#define	GPIO_PF31	31
-#define	GPIO_PF32	32
-#define	GPIO_PF33	33
-#define	GPIO_PF34	34
-#define	GPIO_PF35	35
-#define	GPIO_PF36	36
-#define	GPIO_PF37	37
-#define	GPIO_PF38	38
-#define	GPIO_PF39	39
-#define	GPIO_PF40	40
-#define	GPIO_PF41	41
-#define	GPIO_PF42	42
-#define	GPIO_PF43	43
-#define	GPIO_PF44	44
-#define	GPIO_PF45	45
-#define	GPIO_PF46	46
-#define	GPIO_PF47	47
+#define GPIO_PF0	0
+#define GPIO_PF1	1
+#define GPIO_PF2	2
+#define GPIO_PF3	3
+#define GPIO_PF4	4
+#define GPIO_PF5	5
+#define GPIO_PF6	6
+#define GPIO_PF7	7
+#define GPIO_PF8	8
+#define GPIO_PF9	9
+#define GPIO_PF10	10
+#define GPIO_PF11	11
+#define GPIO_PF12	12
+#define GPIO_PF13	13
+#define GPIO_PF14	14
+#define GPIO_PF15	15
+#define GPIO_PF16	16
+#define GPIO_PF17	17
+#define GPIO_PF18	18
+#define GPIO_PF19	19
+#define GPIO_PF20	20
+#define GPIO_PF21	21
+#define GPIO_PF22	22
+#define GPIO_PF23	23
+#define GPIO_PF24	24
+#define GPIO_PF25	25
+#define GPIO_PF26	26
+#define GPIO_PF27	27
+#define GPIO_PF28	28
+#define GPIO_PF29	29
+#define GPIO_PF30	30
+#define GPIO_PF31	31
+#define GPIO_PF32	32
+#define GPIO_PF33	33
+#define GPIO_PF34	34
+#define GPIO_PF35	35
+#define GPIO_PF36	36
+#define GPIO_PF37	37
+#define GPIO_PF38	38
+#define GPIO_PF39	39
+#define GPIO_PF40	40
+#define GPIO_PF41	41
+#define GPIO_PF42	42
+#define GPIO_PF43	43
+#define GPIO_PF44	44
+#define GPIO_PF45	45
+#define GPIO_PF46	46
+#define GPIO_PF47	47
 
 #define PORT_FIO0 GPIO_0
 #define PORT_FIO1 GPIO_16
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index 3a7b46bbe84..2339ffd0dde 100644
--- a/arch/blackfin/mach-bf561/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -7,7 +7,7 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
-#define MAX_RESOURCES 	MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES	MAX_BLACKFIN_GPIOS
 
 #define P_PPI0_CLK	(P_DONTCARE)
 #define P_PPI0_FS1	(P_DONTCARE)
@@ -91,6 +91,7 @@
 #define P_SPI0_MOSI	(P_DONTCARE)
 #define P_SPI0_MISO	(P_DONTCARE)
 #define P_SPI0_SCK	(P_DONTCARE)
+#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PF2
 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
 
 #endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index f2ca211a76a..bceb98126c2 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -1,7 +1,7 @@
 /*
  * Do some checking to make sure things are OK
  *
- * Copyright 2007-2009 Analog Devices Inc.
+ * Copyright 2007-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -47,18 +47,20 @@
 # error "The kernel load address is too high; keep it below 10meg for safety"
 #endif
 
+#if ANOMALY_05000263 && defined(CONFIG_MPU)
+# error the MPU will not function safely while Anomaly 05000263 applies
+#endif
+
 #if ANOMALY_05000448
 # error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
 #endif
 
 /* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
 #if ANOMALY_05000220 && \
-	((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
-	 (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
-# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
+	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
 #endif
 
-#if ANOMALY_05000475 && \
-	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
-# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory"
+#if ANOMALY_05000491 && !defined(CONFIG_CACHE_FLUSH_L1)
+# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
 #endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index ea540318a22..790c767ca95 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -11,7 +11,11 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_CACHE_FLUSH_L1
+.section .l1.text
+#else
 .text
+#endif
 
 /* 05000443 - IFLUSH cannot be last instruction in hardware loop */
 #if ANOMALY_05000443
@@ -64,17 +68,6 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
-/*
- * Walkaround to avoid loading wrong instruction after invalidating icache
- * and following sequence is met.
- *
- * 1) One instruction address is cached in the instruction cache.
- * 2) This instruction in SDRAM is changed.
- * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
- * 4) This instruction is executed again, but the old one is loaded.
- */
-	P0 = R0;
-	IFLUSH[P0];
 	do_flush IFLUSH
 ENDPROC(_blackfin_icache_flush_range)
 
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b0371689605..5969d86836a 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -17,9 +17,6 @@ ENTRY(_sleep_mode)
 
 	call _set_sic_iwr;
 
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
-
 	P0.H = hi(PLL_CTL);
 	P0.L = lo(PLL_CTL);
 	R1 = W[P0](z);
@@ -65,9 +62,6 @@ ENTRY(_hibernate_mode)
 	call _set_dram_srfs;
 	SSYNC;
 
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
-
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
 
@@ -95,9 +89,6 @@ ENTRY(_sleep_deeper)
 	call _set_sic_iwr;
 	call _set_dram_srfs;	/* Set SDRAM Self Refresh */
 
-	/* Clear all the interrupts,bits sticky */
-	R0 = 0xFFFF (Z);
-	call _set_rtc_istat;
 	P0.H = hi(PLL_DIV);
 	P0.L = lo(PLL_DIV);
 	R6 = W[P0](z);
@@ -269,21 +260,6 @@ ENTRY(_set_sic_iwr)
 	RTS;
 ENDPROC(_set_sic_iwr)
 
-ENTRY(_set_rtc_istat)
-#ifndef CONFIG_BF561
-	P0.H = hi(RTC_ISTAT);
-	P0.L = lo(RTC_ISTAT);
-	w[P0] = R0.L;
-	SSYNC;
-#elif (ANOMALY_05000371)
-	nop;
-	nop;
-	nop;
-	nop;
-#endif
-	RTS;
-ENDPROC(_set_rtc_istat)
-
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
 	P0.L = lo(PLL_STAT);
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index ea7f95f6bb4..09c1fb41074 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -61,10 +61,11 @@ void bfin_pm_suspend_standby_enter(void)
 
 int bf53x_suspend_l1_mem(unsigned char *memptr)
 {
-	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
-	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
-			L1_DATA_A_LENGTH);
-	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+	dma_memcpy_nocache(memptr, (const void *) L1_CODE_START,
+			L1_CODE_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH,
+			(const void *) L1_DATA_A_START, L1_DATA_A_LENGTH);
+	dma_memcpy_nocache(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
 			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
 	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
 			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
@@ -75,10 +76,10 @@ int bf53x_suspend_l1_mem(unsigned char *memptr)
 
 int bf53x_resume_l1_mem(unsigned char *memptr)
 {
-	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
-	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+	dma_memcpy_nocache((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy_nocache((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
 			L1_DATA_A_LENGTH);
-	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+	dma_memcpy_nocache((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
 			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
 	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
 			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
@@ -167,7 +168,7 @@ int bfin_pm_suspend_mem_enter(void)
 	_disable_icplb();
 	bf53x_suspend_l1_mem(memptr);
 
-	do_hibernate(wakeup | vr_wakeup);	/* Goodbye */
+	do_hibernate(wakeup | vr_wakeup);	/* See you later! */
 
 	bf53x_resume_l1_mem(memptr);
 
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index e25bf4440b5..aefe3b18a07 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -20,14 +20,11 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CMOS_UPDATE
 	def_bool y
 
 config ARCH_USES_GETTIMEOFFSET
-	def_bool y
+	def_bool n
 
 config GENERIC_IOMAP
        bool
@@ -131,16 +128,19 @@ choice
 
 config ETRAX100LX
 	bool "ETRAX-100LX-v1"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support version 1 of the ETRAX 100LX.
 
 config ETRAX100LX_V2
 	bool "ETRAX-100LX-v2"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support version 2 of the ETRAX 100LX.
 
 config SVINTO_SIM
 	bool "ETRAX-100LX-for-xsim-simulator"
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support the xsim ETRAX Simulator.
 
diff --git a/arch/cris/Kconfig.debug b/arch/cris/Kconfig.debug
index 0a1d62a2361..0b9a630dc81 100644
--- a/arch/cris/Kconfig.debug
+++ b/arch/cris/Kconfig.debug
@@ -32,4 +32,10 @@ config DEBUG_NMI_OOPS
 	  If the system locks up without any debug information you can say Y
 	  here to make it possible to dump an OOPS with an external NMI.
 
+config NO_SEGFAULT_TERMINATION
+	bool "Keep segfaulting processes"
+	help
+	  Place segfaulting user mode processes on a wait queue instead of
+	  delivering a terminating SIGSEGV to allow debugging with gdb.
+
 endmenu
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 58f5864a668..0d722177992 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -383,7 +383,7 @@ config ETRAX_RS485
 	depends on ETRAX_SERIAL
 	help
 	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
+	  RS-485, see <http://en.wikipedia.org/wiki/Rs485>
 
 config ETRAX_RS485_ON_PA
 	bool "RS-485 mode on PA"
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index c3405507a3d..5047a33043b 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 #include "i2c.h"
@@ -376,7 +375,6 @@ int __init eeprom_init(void)
 /* Opens the device. */
 static int eeprom_open(struct inode * inode, struct file * file)
 {
-  cycle_kernel_lock();
   if(iminor(inode) != EEPROM_MINOR_NR)
      return -ENXIO;
   if(imajor(inode) != EEPROM_MAJOR_NR)
diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c
index 4b0f65fac8e..a07b6d25b0c 100644
--- a/arch/cris/arch-v10/drivers/gpio.c
+++ b/arch/cris/arch-v10/drivers/gpio.c
@@ -16,7 +16,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/poll.h>
 #include <linux/init.h>
@@ -46,8 +45,7 @@ static char gpio_name[] = "etrax gpio";
 static wait_queue_head_t *gpio_wq;
 #endif
 
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char __user *buf,
 	size_t count, loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -324,7 +322,6 @@ gpio_open(struct inode *inode, struct file *filp)
 	if (!priv)
 		return -ENOMEM;
 
-	lock_kernel();
 	priv->minor = p;
 
 	/* initialize the io/alarm struct */
@@ -359,7 +356,6 @@ gpio_open(struct inode *inode, struct file *filp)
 	alarmlist = priv;
 	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	unlock_kernel();
 	return 0;
 }
 
@@ -504,9 +500,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
 static int
 gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
 
-static int
-gpio_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long arg)
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 	unsigned long val;
@@ -516,54 +510,65 @@ gpio_ioctl(struct inode *inode, struct file *file,
 	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
 		return -EINVAL;
 
-	spin_lock_irqsave(&gpio_lock, flags);
-
 	switch (_IOC_NR(cmd)) {
 	case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
 		// read the port
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			ret =  *priv->port;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			ret =  (*R_PORT_G_DATA) & 0x7FFFFFFF;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
 		break;
 	case IO_SETBITS:
 		// set changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
+
 		if (USE_PORTS(priv)) {
-			*priv->port = *priv->shadow |= 
+			*priv->port = *priv->shadow |=
 			  ((unsigned char)arg & priv->changeable_bits);
 		} else if (priv->minor == GPIO_MINOR_G) {
 			*R_PORT_G_DATA = port_g_data_shadow |= (arg & dir_g_out_bits);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
 		break;
 	case IO_CLRBITS:
 		// clear changeable bits with a 1 in arg
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
-			*priv->port = *priv->shadow &= 
+			*priv->port = *priv->shadow &=
 			 ~((unsigned char)arg & priv->changeable_bits);
 		} else if (priv->minor == GPIO_MINOR_G) {
 			*R_PORT_G_DATA = port_g_data_shadow &= ~((unsigned long)arg & dir_g_out_bits);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		// set alarm when bits with 1 in arg go high
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->highalarm |= arg;
 		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_LOWALARM:
 		// set alarm when bits with 1 in arg go low
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->lowalarm |= arg;
 		gpio_some_alarms = 1;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRALARM:
-		// clear alarm for bits with 1 in arg
+		/* clear alarm for bits with 1 in arg */
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->highalarm &= ~arg;
 		priv->lowalarm  &= ~arg;
 		{
 			/* Must update gpio_some_alarms */
 			struct gpio_private *p = alarmlist;
 			int some_alarms;
-			spin_lock_irq(&gpio_lock);
 			p = alarmlist;
 			some_alarms = 0;
 			while (p) {
@@ -574,11 +579,12 @@ gpio_ioctl(struct inode *inode, struct file *file,
 				p = p->next;
 			}
 			gpio_some_alarms = some_alarms;
-			spin_unlock_irq(&gpio_lock);
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
 		/* Read direction 0=input 1=output */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			ret = *priv->dir_shadow;
 		} else if (priv->minor == GPIO_MINOR_G) {
@@ -587,30 +593,40 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			 */
 			ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
-		/* Set direction 0=unchanged 1=input, 
-		 * return mask with 1=input 
+		/* Set direction 0=unchanged 1=input,
+		 * return mask with 1=input
 		 */
+		spin_lock_irqsave(&gpio_lock, flags);
 		ret = setget_input(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
-		/* Set direction 0=unchanged 1=output, 
-		 * return mask with 1=output 
+		/* Set direction 0=unchanged 1=output,
+		 * return mask with 1=output
 		 */
+		spin_lock_irqsave(&gpio_lock, flags);
 		ret =  setget_output(priv, arg) & 0x7FFFFFFF;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_SHUTDOWN:
+		spin_lock_irqsave(&gpio_lock, flags);
 		SOFT_SHUTDOWN();
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_GET_PWR_BT:
+		spin_lock_irqsave(&gpio_lock, flags);
 #if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
 		ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
 #else
 		ret = 0;
 #endif
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CFG_WRITE_MODE:
+		spin_lock_irqsave(&gpio_lock, flags);
 		priv->clk_mask = arg & 0xFF;
 		priv->data_mask = (arg >> 8) & 0xFF;
 		priv->write_msb = (arg >> 16) & 0x01;
@@ -626,28 +642,33 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			priv->data_mask = 0;
 			ret = -EPERM;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
-	case IO_READ_INBITS: 
+	case IO_READ_INBITS:
 		/* *arg is result of reading the input pins */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			val = *priv->port;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			val = *R_PORT_G_DATA;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
 	case IO_READ_OUTBITS:
 		 /* *arg is result of reading the output shadow */
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (USE_PORTS(priv)) {
 			val = *priv->shadow;
 		} else if (priv->minor == GPIO_MINOR_G) {
 			val = port_g_data_shadow;
 		}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
-	case IO_SETGET_INPUT: 
+	case IO_SETGET_INPUT:
 		/* bits set in *arg is set to input,
 		 * *arg updated with current input pins.
 		 */
@@ -656,7 +677,9 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			ret = -EFAULT;
 			break;
 		}
+		spin_lock_irqsave(&gpio_lock, flags);
 		val = setget_input(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
@@ -668,18 +691,21 @@ gpio_ioctl(struct inode *inode, struct file *file,
 			ret = -EFAULT;
 			break;
 		}
+		spin_lock_irqsave(&gpio_lock, flags);
 		val = setget_output(priv, val);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		if (copy_to_user((void __user *)arg, &val, sizeof(val)))
 			ret = -EFAULT;
 		break;
 	default:
+		spin_lock_irqsave(&gpio_lock, flags);
 		if (priv->minor == GPIO_MINOR_LEDS)
 			ret = gpio_leds_ioctl(cmd, arg);
 		else
 			ret = -EINVAL;
+		spin_unlock_irqrestore(&gpio_lock, flags);
 	} /* switch */
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
 	return ret;
 }
 
@@ -713,12 +739,12 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner          = THIS_MODULE,
+	.poll           = gpio_poll,
+	.unlocked_ioctl = gpio_ioctl,
+	.write          = gpio_write,
+	.open           = gpio_open,
+	.release        = gpio_release,
 };
 
 static void ioif_watcher(const unsigned int gpio_in_available,
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index a8737a8eb22..77a94181381 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -14,7 +14,6 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/fs.h>
@@ -60,8 +59,8 @@ static const char i2c_name[] = "i2c";
 
 #define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
 #define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
-#define i2c_enable() 
-#define i2c_disable() 
+#define i2c_enable()
+#define i2c_disable()
 
 /* enable or disable output-enable, to select output or input on the i2c bus */
 
@@ -91,7 +90,7 @@ static const char i2c_name[] = "i2c";
 
 #define i2c_dir_out() \
 	*R_PORT_PB_I2C = (port_pb_i2c_shadow &= ~IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
-	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1); 
+	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1);
 #define i2c_dir_in() \
 	*R_PORT_PB_I2C = (port_pb_i2c_shadow |= IO_MASK(R_PORT_PB_I2C, i2c_oe_)); \
 	REG_SHADOW_SET(R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0);
@@ -189,7 +188,7 @@ i2c_outbyte(unsigned char x)
 		} else {
 			i2c_data(I2C_DATA_LOW);
 		}
-		
+
 		i2c_delay(CLOCK_LOW_TIME/2);
 		i2c_clk(I2C_CLOCK_HIGH);
 		i2c_delay(CLOCK_HIGH_TIME);
@@ -416,7 +415,7 @@ i2c_sendnack(void)
 *#
 *#--------------------------------------------------------------------------*/
 int
-i2c_writereg(unsigned char theSlave, unsigned char theReg, 
+i2c_writereg(unsigned char theSlave, unsigned char theReg,
 	     unsigned char theValue)
 {
 	int error, cntr = 3;
@@ -468,7 +467,7 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
 		 * enable interrupt again
 		 */
 		local_irq_restore(flags);
-		
+
 	} while(error && cntr--);
 
 	i2c_delay(CLOCK_LOW_TIME);
@@ -504,7 +503,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		 * generate start condition
 		 */
 		i2c_start();
-    
+
 		/*
 		 * send slave address
 		 */
@@ -555,7 +554,7 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		 * enable interrupt again
 		 */
 		local_irq_restore(flags);
-		
+
 	} while(error && cntr--);
 
 	spin_unlock(&i2c_lock);
@@ -566,7 +565,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -579,9 +577,7 @@ i2c_release(struct inode *inode, struct file *filp)
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
 		return -EINVAL;
@@ -590,7 +586,7 @@ i2c_ioctl(struct inode *inode, struct file *file,
 	switch (_IOC_NR(cmd)) {
 		case I2C_WRITEREG:
 			/* write to an i2c slave */
-			D(printk("i2cw %d %d %d\n", 
+			D(printk(KERN_DEBUG "i2cw %d %d %d\n",
 				 I2C_ARGSLAVE(arg),
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
@@ -602,26 +598,25 @@ i2c_ioctl(struct inode *inode, struct file *file,
 		{
 			unsigned char val;
 			/* read from an i2c slave */
-			D(printk("i2cr %d %d ", 
+			D(printk(KERN_DEBUG "i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
-			D(printk("= %d\n", val));
+			D(printk(KERN_DEBUG "= %d\n", val));
 			return val;
-		}					    
+		}
 		default:
 			return -EINVAL;
 
 	}
-	
 	return 0;
 }
 
 static const struct file_operations i2c_fops = {
-	.owner    = THIS_MODULE,
-	.ioctl    = i2c_ioctl,
-	.open     = i2c_open,
-	.release  = i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 int __init
diff --git a/arch/cris/arch-v10/drivers/i2c.h b/arch/cris/arch-v10/drivers/i2c.h
index 4ee91426bd4..e36c9627647 100644
--- a/arch/cris/arch-v10/drivers/i2c.h
+++ b/arch/cris/arch-v10/drivers/i2c.h
@@ -1,5 +1,4 @@
-/* $Id: i2c.h,v 1.3 2004/05/28 09:26:59 starvik Exp $ */
-
+/* i2c.h */
 int i2c_init(void);
 
 /* High level I2C actions */
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 109dcd826d1..ee2dd4323da 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -157,7 +157,7 @@ static int sync_serial_open(struct inode *inode, struct file *file);
 static int sync_serial_release(struct inode *inode, struct file *file);
 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
 	unsigned int cmd, unsigned long arg);
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 	size_t count, loff_t *ppos);
@@ -244,13 +244,13 @@ static unsigned sync_serial_prescale_shadow;
 #define NUMBER_OF_PORTS 2
 
 static const struct file_operations sync_serial_fops = {
-	.owner   = THIS_MODULE,
-	.write   = sync_serial_write,
-	.read    = sync_serial_read,
-	.poll    = sync_serial_poll,
-	.ioctl   = sync_serial_ioctl,
-	.open    = sync_serial_open,
-	.release = sync_serial_release
+	.owner		= THIS_MODULE,
+	.write		= sync_serial_write,
+	.read		= sync_serial_read,
+	.poll		= sync_serial_poll,
+	.unlocked_ioctl	= sync_serial_ioctl,
+	.open		= sync_serial_open,
+	.release	= sync_serial_release
 };
 
 static int __init etrax_sync_serial_init(void)
@@ -678,7 +678,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl_unlocked(struct file *file,
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
@@ -956,6 +956,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 	return return_val;
 }
 
+static long sync_serial_ioctl(struct file *file,
+			      unsigned int cmd, unsigned long arg)
+{
+	long ret;
+
+	lock_kernel();
+	ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 	size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v10/kernel/fasttimer.c b/arch/cris/arch-v10/kernel/fasttimer.c
index 5ff08a8695e..8a8196ee8ce 100644
--- a/arch/cris/arch-v10/kernel/fasttimer.c
+++ b/arch/cris/arch-v10/kernel/fasttimer.c
@@ -467,11 +467,7 @@ timer1_handler(int irq, void *dev_id)
 
 static void wake_up_func(unsigned long data)
 {
-#ifdef DECLARE_WAITQUEUE
-  wait_queue_head_t  *sleep_wait_p = (wait_queue_head_t*)data;
-#else
-  struct wait_queue **sleep_wait_p = (struct wait_queue **)data;
-#endif
+  wait_queue_head_t *sleep_wait_p = (wait_queue_head_t *)data;
   wake_up(sleep_wait_p);
 }
 
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index fc457710293..a1f2014b4e3 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -280,7 +280,7 @@ _no_romfs_in_flash:
 	;; the "rom fs" we'll possibly use in 2.4 if not JFFS (which does
 	;; not need this mechanism anyway)
 
-	move.d	__vmlinux_end, $r0; the image will be after the vmlinux end address
+	move.d	__init_end, $r0; the image will be after the end of init
 	move.d	[$r0], $r1	; cramfs assumes same endian on host/target
 	cmp.d	CRAMFS_MAGIC, $r1; magic value in cramfs superblock
 	bne	2f
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 30adae594ae..00eb36f8deb 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -61,66 +61,16 @@ unsigned long get_ns_in_jiffie(void)
 
 unsigned long do_slow_gettimeoffset(void)
 {
-	unsigned long count, t1;
-	unsigned long usec_count = 0;
-	unsigned short presc_count;
-
-	static unsigned long count_p = TIMER0_DIV;/* for the first call after boot */
-	static unsigned long jiffies_p = 0;
-
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off. 
-	 */
-	unsigned long jiffies_t;
+	unsigned long count;
 
 	/* The timer interrupt comes from Etrax timer 0. In order to get
 	 * better precision, we check the current value. It might have
 	 * underflowed already though.
 	 */
-
-#ifndef CONFIG_SVINTO_SIM
-	/* Not available in the xsim simulator. */
 	count = *R_TIMER0_DATA;
-	presc_count = *R_TIM_PRESC_STATUS;  
-	/* presc_count might be wrapped */
-	t1 = *R_TIMER0_DATA;
-	if (count != t1){
-		/* it wrapped, read prescaler again...  */
-		presc_count = *R_TIM_PRESC_STATUS;
-		count = t1;
-	}
-#else
-	count = 0;
-	presc_count = 0;
-#endif
-
- 	jiffies_t = jiffies;
 
-	/*
-	 * avoiding timer inconsistencies (they are rare, but they happen)...
-	 * there are one problem that must be avoided here:
-	 *  1. the timer counter underflows
-	 */
-	if( jiffies_t == jiffies_p ) {
-		if( count > count_p ) {
-			/* Timer wrapped, use new count and prescale 
-			 * increase the time corresponding to one jiffie
-			 */
-			usec_count = 1000000/HZ;
-		}
-	} else
-		jiffies_p = jiffies_t;
-        count_p = count;
-	if (presc_count >= PRESCALE_VALUE/2 ){
-		presc_count =  PRESCALE_VALUE - presc_count + PRESCALE_VALUE/2;
-	} else {
-		presc_count =  PRESCALE_VALUE - presc_count - PRESCALE_VALUE/2;
-	}
 	/* Convert timer value to usec */
-	usec_count += ( (TIMER0_DIV - count) * (1000000/HZ)/TIMER0_DIV ) +
-	              (( (presc_count) * (1000000000/PRESCALE_FREQ))/1000);
-
-	return usec_count;
+	return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
 }
 
 /* Excerpt from the Etrax100 HSDD about the built-in watchdog:
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index b70fb34939d..b07646a3050 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -11,7 +11,6 @@
 #include <linux/string.h>
 #include <linux/fs.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/stddef.h>
 
@@ -217,7 +216,7 @@ static int cryptocop_open(struct inode *, struct file *);
 
 static int cryptocop_release(struct inode *, struct file *);
 
-static int cryptocop_ioctl(struct inode *inode, struct file *file,
+static long cryptocop_ioctl(struct file *file,
 			   unsigned int cmd, unsigned long arg);
 
 static void cryptocop_start_job(void);
@@ -279,10 +278,10 @@ static void print_user_dma_lists(struct cryptocop_dma_list_operation *dma_op);
 
 
 const struct file_operations cryptocop_fops = {
-	.owner =	THIS_MODULE,
-	.open =		cryptocop_open,
-	.release =	cryptocop_release,
-	.ioctl =	cryptocop_ioctl
+	.owner		= THIS_MODULE,
+	.open		= cryptocop_open,
+	.release	= cryptocop_release,
+	.unlocked_ioctl = cryptocop_ioctl
 };
 
 
@@ -2307,7 +2306,6 @@ static int cryptocop_open(struct inode *inode, struct file *filp)
 {
 	int p = iminor(inode);
 
-	cycle_kernel_lock();
 	if (p != CRYPTOCOP_MINOR) return -EINVAL;
 
 	filp->private_data = NULL;
@@ -3102,7 +3100,8 @@ static int cryptocop_ioctl_create_session(struct inode *inode, struct file *filp
 	return 0;
 }
 
-static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
+static long cryptocop_ioctl_unlocked(struct inode *inode,
+	struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	int err = 0;
 	if (_IOC_TYPE(cmd) != ETRAXCRYPTOCOP_IOCTYPE) {
@@ -3134,6 +3133,19 @@ static int cryptocop_ioctl(struct inode *inode, struct file *filp, unsigned int
 	return 0;
 }
 
+static long
+cryptocop_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+       struct inode *inode = file->f_path.dentry->d_inode;
+       long ret;
+
+       lock_kernel();
+       ret = cryptocop_ioctl_unlocked(inode, filp, cmd, arg);
+       unlock_kernel();
+
+       return ret;
+}
+
 
 #ifdef LDEBUG
 static void print_dma_descriptors(struct cryptocop_int_operation *iop)
diff --git a/arch/cris/arch-v32/drivers/i2c.c b/arch/cris/arch-v32/drivers/i2c.c
index 2fd6a740d89..5a3e900c9a7 100644
--- a/arch/cris/arch-v32/drivers/i2c.c
+++ b/arch/cris/arch-v32/drivers/i2c.c
@@ -32,7 +32,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 
 #include <asm/etraxi2c.h>
 
@@ -47,6 +47,7 @@
 #define D(x)
 
 #define I2C_MAJOR 123  /* LOCAL/EXPERIMENTAL */
+static DEFINE_MUTEX(i2c_mutex);
 static const char i2c_name[] = "i2c";
 
 #define CLOCK_LOW_TIME            8
@@ -636,7 +637,6 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 static int
 i2c_open(struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -665,11 +665,11 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
 
-			lock_kernel();
+			mutex_lock(&i2c_mutex);
 			ret = i2c_writereg(I2C_ARGSLAVE(arg),
 					    I2C_ARGREG(arg),
 					    I2C_ARGVALUE(arg));
-			unlock_kernel();
+			mutex_unlock(&i2c_mutex);
 			return ret;
 
 		case I2C_READREG:
@@ -679,9 +679,9 @@ i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
-			lock_kernel();
+			mutex_lock(&i2c_mutex);
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
-			unlock_kernel();
+			mutex_unlock(&i2c_mutex);
 			D(printk("= %d\n", val));
 			return val;
 		}
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 97357cfd17b..2dcd27adbad 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -72,8 +72,7 @@ static char gpio_name[] = "etrax gpio";
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 			      unsigned long arg);
 #endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char __user *buf,
 	size_t count, loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -521,7 +520,7 @@ static inline unsigned long setget_output(struct gpio_private *priv,
 	return dir_shadow;
 } /* setget_output */
 
-static int gpio_ioctl(struct inode *inode, struct file *file,
+static long gpio_ioctl_unlocked(struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
@@ -664,6 +663,17 @@ static int gpio_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       lock_kernel();
+       ret = gpio_ioctl_unlocked(file, cmd, arg);
+       unlock_kernel();
+
+       return ret;
+}
+
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 	unsigned long arg)
@@ -877,12 +887,12 @@ static int gpio_pwm_ioctl(struct gpio_private *priv, unsigned int cmd,
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner		= THIS_MODULE,
+	.poll		= gpio_poll,
+	.unlocked_ioctl	= gpio_ioctl,
+	.write		= gpio_write,
+	.open		= gpio_open,
+	.release	= gpio_release,
 };
 
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index d89ab80498e..5ec8a7d4e7d 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -74,8 +74,7 @@ static wait_queue_head_t *gpio_wq;
 static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 	unsigned long arg);
 #endif
-static int gpio_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
 	loff_t *off);
 static int gpio_open(struct inode *inode, struct file *filp);
@@ -185,7 +184,7 @@ static volatile unsigned long *dir_oe[NUM_PORTS] = {
 static unsigned int gpio_poll(struct file *file, struct poll_table_struct *wait)
 {
 	unsigned int mask = 0;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	unsigned long data;
 	poll_wait(file, &priv->alarm_wq, wait);
 	if (priv->minor == GPIO_MINOR_A) {
@@ -353,7 +352,7 @@ gpio_pa_interrupt(int irq, void *dev_id)
 static ssize_t gpio_write(struct file *file, const char *buf, size_t count,
 	loff_t *off)
 {
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	unsigned char data, clk_mask, data_mask, write_msb;
 	unsigned long flags;
 	unsigned long shadow;
@@ -468,7 +467,7 @@ gpio_release(struct inode *inode, struct file *filp)
 
 	spin_lock_irq(&alarm_lock);
 	p = alarmlist;
-	todel = (struct gpio_private *)filp->private_data;
+	todel = filp->private_data;
 
 	if (p == todel) {
 		alarmlist = todel->next;
@@ -557,17 +556,15 @@ inline unsigned long setget_output(struct gpio_private *priv, unsigned long arg)
 	return dir_shadow;
 } /* setget_output */
 
-static int
-gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+static int gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
 
 static int
-gpio_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long arg)
+gpio_ioctl_unlocked(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 	unsigned long val;
 	unsigned long shadow;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 	if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE)
 		return -EINVAL;
 
@@ -707,6 +704,17 @@ gpio_ioctl(struct inode *inode, struct file *file,
 	return 0;
 }
 
+static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       lock_kernel();
+       ret = gpio_ioctl_unlocked(file, cmd, arg);
+       unlock_kernel();
+
+       return ret;
+}
+
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
 static int
 virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -714,7 +722,7 @@ virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	unsigned long flags;
 	unsigned short val;
 	unsigned short shadow;
-	struct gpio_private *priv = (struct gpio_private *)file->private_data;
+	struct gpio_private *priv = file->private_data;
 
 	switch (_IOC_NR(cmd)) {
 	case IO_SETBITS:
@@ -856,12 +864,12 @@ gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
 }
 
 static const struct file_operations gpio_fops = {
-	.owner       = THIS_MODULE,
-	.poll        = gpio_poll,
-	.ioctl       = gpio_ioctl,
-	.write       = gpio_write,
-	.open        = gpio_open,
-	.release     = gpio_release,
+	.owner		= THIS_MODULE,
+	.poll		= gpio_poll,
+	.unlocked_ioctl	= gpio_ioctl,
+	.write		= gpio_write,
+	.open		= gpio_open,
+	.release	= gpio_release,
 };
 
 #ifdef CONFIG_ETRAX_VIRTUAL_GPIO
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index 4889f196ecd..ca248f3adb8 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -153,7 +153,7 @@ static int sync_serial_open(struct inode *, struct file*);
 static int sync_serial_release(struct inode*, struct file*);
 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
 
-static int sync_serial_ioctl(struct inode*, struct file*,
+static int sync_serial_ioctl(struct file *,
 			     unsigned int cmd, unsigned long arg);
 static ssize_t sync_serial_write(struct file * file, const char * buf,
 				 size_t count, loff_t *ppos);
@@ -241,13 +241,13 @@ static struct sync_port ports[]=
 #define NBR_PORTS ARRAY_SIZE(ports)
 
 static const struct file_operations sync_serial_fops = {
-	.owner   = THIS_MODULE,
-	.write   = sync_serial_write,
-	.read    = sync_serial_read,
-	.poll    = sync_serial_poll,
-	.ioctl   = sync_serial_ioctl,
-	.open    = sync_serial_open,
-	.release = sync_serial_release
+	.owner		= THIS_MODULE,
+	.write		= sync_serial_write,
+	.read		= sync_serial_read,
+	.poll		= sync_serial_poll,
+	.unlocked_ioctl	= sync_serial_ioctl,
+	.open		= sync_serial_open,
+	.release	= sync_serial_release
 };
 
 static int __init etrax_sync_serial_init(void)
@@ -650,7 +650,7 @@ static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 	return mask;
 }
 
-static int sync_serial_ioctl(struct inode *inode, struct file *file,
+static int sync_serial_ioctl(struct file *file,
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
@@ -961,6 +961,18 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 	return return_val;
 }
 
+static long sync_serial_ioctl(struct file *file,
+                             unsigned int cmd, unsigned long arg)
+{
+       long ret;
+
+       lock_kernel();
+       ret = sync_serial_ioctl_unlocked(file, cmd, arg);
+       unlock_kernel();
+
+       return ret;
+}
+
 /* NOTE: sync_serial_write does not support concurrency */
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 				 size_t count, loff_t *ppos)
diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S
index 956e8fb82f0..6fc3d95d702 100644
--- a/arch/cris/arch-v32/kernel/cacheflush.S
+++ b/arch/cris/arch-v32/kernel/cacheflush.S
@@ -1,4 +1,5 @@
 	.global cris_flush_cache_range
+	.type	cris_flush_cache_range, @function
 cris_flush_cache_range:
 	move.d 1024, $r12
 	cmp.d $r11, $r12
@@ -80,8 +81,10 @@ cris_flush_1KB:
 	addq 32, $r10
 	ba cris_flush_cache_range
 	sub.d $r12, $r11
+	.size	cris_flush_cache_range, . - cris_flush_cache_range
 
 	.global cris_flush_cache
+	.type	cris_flush_cache, @function
 cris_flush_cache:
 	moveq 0, $r10
 cris_flush_line:
@@ -92,3 +95,5 @@ cris_flush_line:
 	fidxd [$r10]
 	ret
 	nop
+	.size	cris_flush_cache, . - cris_flush_cache
+
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 1f39861eac8..0ecb50b8f0d 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -76,12 +76,15 @@ _need_resched:
 
 	; Called at exit from fork. schedule_tail must be called to drop
 	; spinlock if CONFIG_PREEMPT.
+	.type	ret_from_fork,@function
 ret_from_fork:
 	jsr schedule_tail
 	nop
 	ba  ret_from_sys_call
 	nop
+	.size	ret_from_fork, . - ret_from_fork
 
+	.type	ret_from_intr,@function
 ret_from_intr:
 	;; Check for resched if preemptive kernel, or if we're going back to
 	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
@@ -91,9 +94,10 @@ ret_from_intr:
 	move.d	[$acr], $r0
 	btstq	16, $r0			; User-mode flag.
 	bpl	_resume_kernel
+	.size	ret_from_intr, . - ret_from_intr + 2	; +2 includes the dslot.
 
 	; Note that di below is in delay slot.
-
+	.type	_resume_userspace,@function
 _resume_userspace:
 	di			; So need_resched and sigpending don't change.
 
@@ -107,6 +111,7 @@ _resume_userspace:
 	nop
 	ba	_Rexit
 	nop
+	.size	_resume_userspace, . - _resume_userspace
 
 	;; The system_call is called by a BREAK instruction, which looks pretty
 	;; much like any other exception.
@@ -122,30 +127,28 @@ _resume_userspace:
 	;; non-used instructions. Only the non-common cases cause the outlined code
 	;; to run..
 
+	.type	system_call,@function
 system_call:
 	;; Stack-frame similar to the irq heads, which is reversed in
 	;; ret_from_sys_call.
-	subq	12, $sp		; Skip EXS, EDA.
-	move	$erp, [$sp]
-	subq	4, $sp
-	move	$srp, [$sp]
-	subq	4, $sp
-	move	$ccs, [$sp]
-	subq	4, $sp
-	ei			; Allow IRQs while handling system call
-	move	$spc, [$sp]
-	subq	4, $sp
-	move	$mof, [$sp]
-	subq	4, $sp
-	move	$srs, [$sp]
-	subq	4, $sp
-	move.d	$acr, [$sp]
-	subq	14*4, $sp	; Make room for R0-R13.
-	movem	$r13, [$sp]	; Push R0-R13
-	subq	4, $sp
-	move.d	$r10, [$sp]	; Push orig_r10.
 
-; Set S-bit when kernel debugging to keep hardware breakpoints active.
+	sub.d	92, $sp		; Skip EXS and EDA.
+	movem	$r13, [$sp]
+	move.d	$sp, $r8
+	addq	14*4, $r8
+	move.d	$acr, $r0
+	move	$srs, $r1
+	move	$mof, $r2
+	move	$spc, $r3
+	move	$ccs, $r4
+	move	$srp, $r5
+	move	$erp, $r6
+	subq	4, $sp
+	movem	$r6, [$r8]
+	ei			; Enable interrupts while processing syscalls.
+	move.d	$r10, [$sp]
+
+	; Set S-bit when kernel debugging to keep hardware breakpoints active.
 #ifdef CONFIG_ETRAX_KGDB
 	move $ccs, $r0
 	or.d (1<<9), $r0
@@ -217,7 +220,9 @@ ret_from_sys_call:
 	and.d	_TIF_ALLWORK_MASK, $r1
 	bne	_syscall_exit_work
 	nop
+	.size	system_call, . - system_call
 
+	.type	_Rexit,@function
 _Rexit:
 	;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
 	;; and ptregs.h.
@@ -234,10 +239,12 @@ _Rexit:
 	addq    8, $sp		; Skip EXS, EDA.
 	jump	$erp
 	rfe			; Restore condition code stack in delay-slot.
+	.size	_Rexit, . - _Rexit
 
 	;; We get here after doing a syscall if extra work might need to be done
 	;; perform syscall exit tracing if needed.
 
+	.type	_syscall_exit_work,@function
 _syscall_exit_work:
 	;; R0 contains current at this point and irq's are disabled.
 
@@ -253,14 +260,18 @@ _syscall_exit_work:
 	move.d	$r1, $r9
 	ba	_resume_userspace
 	nop
+	.size	_syscall_exit_work, . - _syscall_exit_work
 
+	.type	_work_pending,@function
 _work_pending:
 	addoq	+TI_flags, $r0, $acr
 	move.d	[$acr], $r10
 	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
 	bpl	_work_notifysig		; No, must be signal/notify.
 	nop
+	.size	_work_pending, . - _work_pending
 
+	.type	_work_resched,@function
 _work_resched:
 	move.d	$r9, $r1		; Preserve R9.
 	jsr	schedule
@@ -276,7 +287,9 @@ _work_resched:
 	btstq	TIF_NEED_RESCHED, $r1
 	bmi	_work_resched		; current->work.need_resched.
 	nop
+	.size	_work_resched, . - _work_resched
 
+	.type	_work_notifysig,@function
 _work_notifysig:
 	;; Deal with pending signals and notify-resume requests.
 
@@ -288,6 +301,7 @@ _work_notifysig:
 
 	ba _Rexit
 	nop
+	.size	_work_notifysig, . - _work_notifysig
 
 	;; We get here as a sidetrack when we've entered a syscall with the
 	;; trace-bit set. We need to call do_syscall_trace and then continue
@@ -329,41 +343,43 @@ _syscall_trace_entry:
 	;;
 	;; Returns old current in R10.
 
+	.type	resume,@function
 resume:
-	subq	4, $sp
-	move	$srp, [$sp]		; Keep old/new PC on the stack.
+	subq	4, $sp			; Make space for srp.
+
 	add.d	$r12, $r10		; R10 = current tasks tss.
 	addoq	+THREAD_ccs, $r10, $acr
+	move	$srp, [$sp]		; Keep old/new PC on the stack.
 	move	$ccs, [$acr]		; Save IRQ enable state.
 	di
 
 	addoq	+THREAD_usp, $r10, $acr
+	subq	10*4, $sp		; Make room for R9.
 	move	$usp, [$acr]		; Save user-mode stackpointer.
 
 	;; See copy_thread for the reason why register R9 is saved.
-	subq	10*4, $sp
 	movem	$r9, [$sp]		; Save non-scratch registers and R9.
 
 	addoq	+THREAD_ksp, $r10, $acr
+	move.d	$sp, $r10		; Return last running task in R10.
 	move.d	$sp, [$acr]		; Save kernel SP for old task.
 
-	move.d	$sp, $r10		; Return last running task in R10.
 	and.d   -8192, $r10		; Get thread_info from stackpointer.
 	addoq	+TI_task, $r10, $acr
-	move.d	[$acr], $r10		; Get task.
 	add.d	$r12, $r11		; Find the new tasks tss.
+	move.d	[$acr], $r10		; Get task.
 	addoq	+THREAD_ksp, $r11, $acr
 	move.d	[$acr], $sp		; Switch to new stackframe.
+	addoq	+THREAD_usp, $r11, $acr
 	movem	[$sp+], $r9		; Restore non-scratch registers and R9.
 
-	addoq	+THREAD_usp, $r11, $acr
 	move	[$acr], $usp		; Restore user-mode stackpointer.
 
 	addoq	+THREAD_ccs, $r11, $acr
+	move.d	[$sp+], $r11
+	jump	$r11			; Restore PC.
 	move	[$acr], $ccs		; Restore IRQ enable status.
-	move.d	[$sp+], $acr
-	jump	$acr			; Restore PC.
-	nop
+	.size	resume, . - resume
 
 nmi_interrupt:
 
@@ -426,6 +442,7 @@ spurious_interrupt:
 	;; time. Jump to the first set interrupt bit in a priotiry fashion. The
 	;; hardware will call the unserved interrupts after the handler
 	;; finishes.
+	.type	multiple_interrupt, @function
 multiple_interrupt:
 	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
 	subq	12, $sp		; Skip EXS, EDA.
@@ -458,6 +475,7 @@ multiple_interrupt:
 	move.d	$sp, $r10
 	jump    ret_from_intr
 	nop
+	.size	multiple_interrupt, . - multiple_interrupt
 
 do_sigtrap:
 	;; Sigtraps the process that executed the BREAK instruction. Creates a
@@ -514,11 +532,13 @@ _ugdb_handle_exception:
 	move.d	[$sp+], $r0		; Restore R0 in delay slot.
 
 	.global kernel_execve
+	.type	kernel_execve,@function
 kernel_execve:
 	move.d __NR_execve, $r9
 	break 13
 	ret
 	nop
+	.size	kernel_execve, . - kernel_execve
 
 	.data
 
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index 76266f80a5f..5d502b9ab56 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -69,7 +69,13 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 	;;
 	;; Note; 3 cycles is needed for a bank-select to take effect. Further;
 	;; bank 1 is the instruction MMU, bank 2 is the data MMU.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 5)     \
+		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
 	move.d	REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4)	\
 		| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
@@ -88,7 +94,39 @@ secondary_cpu_entry: /* Entry point for secondary CPUs */
 
 	;; Enable certain page protections and setup linear mapping
 	;; for f,e,c,b,4,0.
-#ifndef CONFIG_ETRAX_VCS_SIM
+
+	;; ARTPEC-3:
+	;; c,d used for linear kernel mapping, up to 512 MB
+	;; e used for vmalloc
+	;; f unused, but page mapped to get page faults
+
+	;; ETRAX FS:
+	;; c used for linear kernel mapping, up to 256 MB
+	;; d used for vmalloc
+	;; e,f used for memory-mapped NOR flash
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
+		| REG_STATE(mmu, rw_mm_cfg, inv, on)            \
+		| REG_STATE(mmu, rw_mm_cfg, seg_f, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_e, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_d, linear)      \
+		| REG_STATE(mmu, rw_mm_cfg, seg_c, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_b, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_a, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_9, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_8, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_7, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_6, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_5, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_4, linear)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_3, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_2, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_1, page)	\
+		| REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
+#elif !defined(CONFIG_ETRAX_VCS_SIM)
 	move.d	REG_STATE(mmu, rw_mm_cfg, we, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, acc, on)		\
 		| REG_STATE(mmu, rw_mm_cfg, ex, on)		\
@@ -329,7 +367,7 @@ _no_romfs_in_flash:
 	;; For jffs2, a jhead is prepended which contains with magic and length.
 	;; The jhead is not part of the jffs2 partition however.
 #ifndef CONFIG_ETRAXFS_SIM
-	move.d	__vmlinux_end, $r0
+	move.d	__bss_start, $r0
 #else
 	move.d	__end, $r0
 #endif
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 0b1febe44aa..2ed48ae3d31 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -97,7 +97,11 @@ extern void breakh_BUG(void);
 /*
  * Build the IRQ handler stubs using macros from irq.h.
  */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+BUILD_TIMER_IRQ(0x31, 0)
+#else
 BUILD_IRQ(0x31)
+#endif
 BUILD_IRQ(0x32)
 BUILD_IRQ(0x33)
 BUILD_IRQ(0x34)
@@ -123,7 +127,11 @@ BUILD_IRQ(0x47)
 BUILD_IRQ(0x48)
 BUILD_IRQ(0x49)
 BUILD_IRQ(0x4a)
+#ifdef CONFIG_ETRAXFS
+BUILD_TIMER_IRQ(0x4b, 0)
+#else
 BUILD_IRQ(0x4b)
+#endif
 BUILD_IRQ(0x4c)
 BUILD_IRQ(0x4d)
 BUILD_IRQ(0x4e)
@@ -199,25 +207,20 @@ block_irq(int irq, int cpu)
         unsigned long flags;
 
 	spin_lock_irqsave(&irq_lock, flags);
-	if (irq - FIRST_IRQ < 32)
+	/* Remember, 1 let thru, 0 block. */
+	if (irq - FIRST_IRQ < 32) {
 		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			rw_mask, 0);
-	else
-		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
-			rw_mask, 1);
-
-	/* Remember; 1 let thru, 0 block. */
-	if (irq - FIRST_IRQ < 32)
 		intr_mask &= ~(1 << (irq - FIRST_IRQ));
-	else
-		intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
-
-	if (irq - FIRST_IRQ < 32)
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			0, intr_mask);
-	else
+	} else {
+		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+			rw_mask, 1);
+		intr_mask &= ~(1 << (irq - FIRST_IRQ - 32));
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			1, intr_mask);
+	}
         spin_unlock_irqrestore(&irq_lock, flags);
 }
 
@@ -228,26 +231,20 @@ unblock_irq(int irq, int cpu)
         unsigned long flags;
 
         spin_lock_irqsave(&irq_lock, flags);
-	if (irq - FIRST_IRQ < 32)
+	/* Remember, 1 let thru, 0 block. */
+	if (irq - FIRST_IRQ < 32) {
 		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
 			rw_mask, 0);
-	else
-		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
-			rw_mask, 1);
-
-	/* Remember; 1 let thru, 0 block. */
-	if (irq - FIRST_IRQ < 32)
 		intr_mask |= (1 << (irq - FIRST_IRQ));
-	else
-		intr_mask |= (1 << (irq - FIRST_IRQ - 32));
-
-	if (irq - FIRST_IRQ < 32)
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			0, intr_mask);
-	else
+	} else {
+		intr_mask = REG_RD_INT_VECT(intr_vect, irq_regs[cpu],
+			rw_mask, 1);
+		intr_mask |= (1 << (irq - FIRST_IRQ - 32));
 		REG_WR_INT_VECT(intr_vect, irq_regs[cpu], rw_mask,
 			1, intr_mask);
-
+	}
         spin_unlock_irqrestore(&irq_lock, flags);
 }
 
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index c981fd66332..6b653323d79 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -174,10 +174,10 @@
 #include <asm/ptrace.h>
 
 #include <asm/irq.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/hwregs/intr_vect_defs.h>
-#include <arch/hwregs/ser_defs.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/intr_vect_defs.h>
+#include <hwregs/ser_defs.h>
 
 /* From entry.S. */
 extern void gdb_handle_exception(void);
@@ -988,26 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	ptr = pack_hex_byte(PC);
+	ptr = pack_hex_byte(ptr, PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	ptr = pack_hex_byte(R8);
+	ptr = pack_hex_byte(ptr, R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	ptr = pack_hex_byte(SP);
+	ptr = pack_hex_byte(ptr, SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-	ptr = pack_hex_byte(ERP);
+	ptr = pack_hex_byte(ptr, ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
diff --git a/arch/cris/arch-v32/kernel/kgdb_asm.S b/arch/cris/arch-v32/kernel/kgdb_asm.S
index eba93e7e4aa..f3a47605902 100644
--- a/arch/cris/arch-v32/kernel/kgdb_asm.S
+++ b/arch/cris/arch-v32/kernel/kgdb_asm.S
@@ -5,7 +5,7 @@
  * port exceptions for kernel debugging purposes.
  */
 
-#include <arch/hwregs/intr_vect.h>
+#include <hwregs/intr_vect.h>
 
 	;; Exported functions.
 	.globl kgdb_handle_exception
diff --git a/arch/cris/arch-v32/kernel/pinmux.c b/arch/cris/arch-v32/kernel/pinmux.c
deleted file mode 100644
index f6f3637a419..00000000000
--- a/arch/cris/arch-v32/kernel/pinmux.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
- * Unassigned pins and GPIO pins can be allocated to a fixed interface
- * or the I/O processor instead.
- *
- * Copyright (c) 2004 Axis Communications AB.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <arch/hwregs/reg_map.h>
-#include <arch/hwregs/reg_rdwr.h>
-#include <arch/pinmux.h>
-#include <arch/hwregs/pinmux_defs.h>
-
-#undef DEBUG
-
-#define PORT_PINS 18
-#define PORTS 4
-
-static char pins[PORTS][PORT_PINS];
-static DEFINE_SPINLOCK(pinmux_lock);
-
-static void crisv32_pinmux_set(int port);
-
-int
-crisv32_pinmux_init(void)
-{
-	static int initialized = 0;
-
-	if (!initialized) {
-		reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
-		initialized = 1;
-		pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
-		pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
-		REG_WR(pinmux, regi_pinmux, rw_pa, pa);
-		crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_D, 0, PORT_PINS - 1, pinmux_gpio);
-		crisv32_pinmux_alloc(PORT_E, 0, PORT_PINS - 1, pinmux_gpio);
-	}
-
-	return 0;
-}
-
-int
-crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
-{
-	int i;
-	unsigned long flags;
-
-	crisv32_pinmux_init();
-
-	if (port > PORTS || port < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	for (i = first_pin; i <= last_pin; i++)
-	{
-		if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
-		    (pins[port][i] != mode))
-		{
-			spin_unlock_irqrestore(&pinmux_lock, flags);
-#ifdef DEBUG
-			panic("Pinmux alloc failed!\n");
-#endif
-			return -EPERM;
-		}
-	}
-
-	for (i = first_pin; i <= last_pin; i++)
-		pins[port][i] = mode;
-
-	crisv32_pinmux_set(port);
-
-	spin_unlock_irqrestore(&pinmux_lock, flags);
-
-	return 0;
-}
-
-int
-crisv32_pinmux_alloc_fixed(enum fixed_function function)
-{
-	int ret = -EINVAL;
-	char saved[sizeof pins];
-	unsigned long flags;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	/* Save internal data for recovery */
-	memcpy(saved, pins, sizeof pins);
-
-	reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-
-	switch(function)
-	{
-	case pinmux_ser1:
-		ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
-		hwprot.ser1 = regk_pinmux_yes;
-		break;
-	case pinmux_ser2:
-		ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
-		hwprot.ser2 = regk_pinmux_yes;
-		break;
-	case pinmux_ser3:
-		ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
-		hwprot.ser3 = regk_pinmux_yes;
-		break;
-	case pinmux_sser0:
-		ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-		hwprot.sser0 = regk_pinmux_yes;
-		break;
-	case pinmux_sser1:
-		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-		hwprot.sser1 = regk_pinmux_yes;
-		break;
-	case pinmux_ata0:
-		ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
-		hwprot.ata0 = regk_pinmux_yes;
-		break;
-	case pinmux_ata1:
-		ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
-		hwprot.ata1 = regk_pinmux_yes;
-		break;
-	case pinmux_ata2:
-		ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
-		hwprot.ata2 = regk_pinmux_yes;
-		break;
-	case pinmux_ata3:
-		ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
-		hwprot.ata2 = regk_pinmux_yes;
-		break;
-	case pinmux_ata:
-		ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
-		ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
-		hwprot.ata = regk_pinmux_yes;
-		break;
-	case pinmux_eth1:
-		ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
-		hwprot.eth1 = regk_pinmux_yes;
-		hwprot.eth1_mgm = regk_pinmux_yes;
-		break;
-	case pinmux_timer:
-		ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-		hwprot.timer = regk_pinmux_yes;
-		spin_unlock_irqrestore(&pinmux_lock, flags);
-		return ret;
-	}
-
-	if (!ret)
-		REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-	else
-		memcpy(pins, saved, sizeof pins);
-
-  spin_unlock_irqrestore(&pinmux_lock, flags);
-
-  return ret;
-}
-
-void
-crisv32_pinmux_set(int port)
-{
-	int i;
-	int gpio_val = 0;
-	int iop_val = 0;
-
-	for (i = 0; i < PORT_PINS; i++)
-	{
-		if (pins[port][i] == pinmux_gpio)
-			gpio_val |= (1 << i);
-		else if (pins[port][i] == pinmux_iop)
-			iop_val |= (1 << i);
-	}
-
-	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_gio + 8*port, gpio_val);
-	REG_WRITE(int, regi_pinmux + REG_RD_ADDR_pinmux_rw_pb_iop + 8*port, iop_val);
-
-#ifdef DEBUG
-       crisv32_pinmux_dump();
-#endif
-}
-
-int
-crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
-{
-	int i;
-	unsigned long flags;
-
-	crisv32_pinmux_init();
-
-	if (port > PORTS || port < 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&pinmux_lock, flags);
-
-	for (i = first_pin; i <= last_pin; i++)
-		pins[port][i] = pinmux_none;
-
-	crisv32_pinmux_set(port);
-	spin_unlock_irqrestore(&pinmux_lock, flags);
-
-	return 0;
-}
-
-void
-crisv32_pinmux_dump(void)
-{
-	int i, j;
-
-	crisv32_pinmux_init();
-
-	for (i = 0; i < PORTS; i++)
-	{
-		printk("Port %c\n", 'B'+i);
-		for (j = 0; j < PORT_PINS; j++)
-			printk("  Pin %d = %d\n", j, pins[i][j]);
-	}
-}
-
-__initcall(crisv32_pinmux_init);
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c
index 72e9e8331f6..61e10ae6529 100644
--- a/arch/cris/arch-v32/kernel/setup.c
+++ b/arch/cris/arch-v32/kernel/setup.c
@@ -9,6 +9,9 @@
 #include <linux/delay.h>
 #include <linux/param.h>
 
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+
 #ifdef CONFIG_PROC_FS
 
 #define HAS_FPU         0x0001
@@ -43,14 +46,15 @@ static struct cpu_info cpinfo[] = {
 
 	{"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
 			        | HAS_MMU},
-
+#ifdef CONFIG_ETRAXFS
 	{"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
-
+#else
+	{"ARTPEC-3", 32, 32, HAS_ETHERNET100 | HAS_MMU},
+#endif
 	{"Unknown", 0, 0, 0}
 };
 
-int
-show_cpuinfo(struct seq_file *m, void *v)
+int show_cpuinfo(struct seq_file *m, void *v)
 {
 	int i;
 	int cpu = (int)v - 1;
@@ -107,9 +111,63 @@ show_cpuinfo(struct seq_file *m, void *v)
 
 #endif /* CONFIG_PROC_FS */
 
-void
-show_etrax_copyright(void)
+void show_etrax_copyright(void)
+{
+#ifdef CONFIG_ETRAXFS
+	printk(KERN_INFO "Linux/CRISv32 port on ETRAX FS "
+		"(C) 2003, 2004 Axis Communications AB\n");
+#else
+	printk(KERN_INFO "Linux/CRISv32 port on ARTPEC-3 "
+		"(C) 2003-2009 Axis Communications AB\n");
+#endif
+}
+
+static struct i2c_board_info __initdata i2c_info[] = {
+	{I2C_BOARD_INFO("camblock", 0x43)},
+	{I2C_BOARD_INFO("tmp100", 0x48)},
+	{I2C_BOARD_INFO("tmp100", 0x4A)},
+	{I2C_BOARD_INFO("tmp100", 0x4C)},
+	{I2C_BOARD_INFO("tmp100", 0x4D)},
+	{I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_RTC_DRV_PCF8563
+	{I2C_BOARD_INFO("pcf8563", 0x51)},
+#endif
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	{I2C_BOARD_INFO("vgpio", 0x20)},
+	{I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+	{I2C_BOARD_INFO("pca9536", 0x41)},
+	{I2C_BOARD_INFO("fnp300", 0x40)},
+	{I2C_BOARD_INFO("fnp300", 0x42)},
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info2[] = {
+	{I2C_BOARD_INFO("camblock", 0x43)},
+	{I2C_BOARD_INFO("tmp100", 0x48)},
+	{I2C_BOARD_INFO("tmp100", 0x4A)},
+	{I2C_BOARD_INFO("tmp100", 0x4C)},
+	{I2C_BOARD_INFO("tmp100", 0x4D)},
+	{I2C_BOARD_INFO("tmp100", 0x4E)},
+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
+	{I2C_BOARD_INFO("vgpio", 0x20)},
+	{I2C_BOARD_INFO("vgpio", 0x21)},
+#endif
+	{I2C_BOARD_INFO("pca9536", 0x41)},
+	{I2C_BOARD_INFO("fnp300", 0x40)},
+	{I2C_BOARD_INFO("fnp300", 0x42)},
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static struct i2c_board_info __initdata i2c_info3[] = {
+	{I2C_BOARD_INFO("adc101", 0x54)},
+};
+
+static int __init etrax_init(void)
 {
-	printk(KERN_INFO
-               "Linux/CRISv32 port on ETRAX FS (C) 2003, 2004 Axis Communications AB\n");
+	i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
+	i2c_register_board_info(1, i2c_info2, ARRAY_SIZE(i2c_info2));
+	i2c_register_board_info(2, i2c_info3, ARRAY_SIZE(i2c_info3));
+	return 0;
 }
+arch_initcall(etrax_init);
diff --git a/arch/cris/arch-v32/kernel/signal.c b/arch/cris/arch-v32/kernel/signal.c
index 0b7e3f14328..b3a05ae5621 100644
--- a/arch/cris/arch-v32/kernel/signal.c
+++ b/arch/cris/arch-v32/kernel/signal.c
@@ -587,7 +587,7 @@ do_signal(int canrestart, struct pt_regs *regs)
 		}
 
 		if (regs->r10 == -ERESTART_RESTARTBLOCK){
-			regs->r10 = __NR_restart_syscall;
+			regs->r9 = __NR_restart_syscall;
 			regs->erp -= 2;
 		}
 	}
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 1ee0e101022..a545211e999 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -1,13 +1,13 @@
 /*
  *  linux/arch/cris/arch-v32/kernel/time.c
  *
- *  Copyright (C) 2003-2007 Axis Communications AB
+ *  Copyright (C) 2003-2010 Axis Communications AB
  *
  */
 
 #include <linux/timex.h>
 #include <linux/time.h>
-#include <linux/jiffies.h>
+#include <linux/clocksource.h>
 #include <linux/interrupt.h>
 #include <linux/swap.h>
 #include <linux/sched.h>
@@ -36,6 +36,30 @@
 /* Number of 763 counts before watchdog bites */
 #define ETRAX_WD_CNT		((2*ETRAX_WD_HZ)/HZ + 1)
 
+/* Register the continuos readonly timer available in FS and ARTPEC-3.  */
+static cycle_t read_cont_rotime(struct clocksource *cs)
+{
+	return (u32)REG_RD(timer, regi_timer0, r_time);
+}
+
+static struct clocksource cont_rotime = {
+	.name   = "crisv32_rotime",
+	.rating = 300,
+	.read   = read_cont_rotime,
+	.mask   = CLOCKSOURCE_MASK(32),
+	.shift  = 10,
+	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init etrax_init_cont_rotime(void)
+{
+	cont_rotime.mult = clocksource_khz2mult(100000, cont_rotime.shift);
+	clocksource_register(&cont_rotime);
+	return 0;
+}
+arch_initcall(etrax_init_cont_rotime);
+
+
 unsigned long timer_regs[NR_CPUS] =
 {
 	regi_timer0,
@@ -67,43 +91,6 @@ unsigned long get_ns_in_jiffie(void)
 	return ns;
 }
 
-unsigned long do_slow_gettimeoffset(void)
-{
-	unsigned long count;
-	unsigned long usec_count = 0;
-
-	/* For the first call after boot */
-	static unsigned long count_p = TIMER0_DIV;
-	static unsigned long jiffies_p = 0;
-
-	/* Cache volatile jiffies temporarily; we have IRQs turned off. */
-	unsigned long jiffies_t;
-
-	/* The timer interrupt comes from Etrax timer 0. In order to get
-	 * better precision, we check the current value. It might have
-	 * underflowed already though. */
-	count = REG_RD(timer, regi_timer0, r_tmr0_data);
-	jiffies_t = jiffies;
-
-	/* Avoiding timer inconsistencies (they are rare, but they happen)
-	 * There is one problem that must be avoided here:
-	 *	1. the timer counter underflows
-	 */
-	if( jiffies_t == jiffies_p ) {
-		if( count > count_p ) {
-			/* Timer wrapped, use new count and prescale.
-			 * Increase the time corresponding to one jiffy.
-			 */
-			usec_count = 1000000/HZ;
-		}
-	} else
-		jiffies_p = jiffies_t;
-        count_p = count;
-	/* Convert timer value to usec */
-	/* 100 MHz timer, divide by 100 to get usec */
-	usec_count +=  (TIMER0_DIV - count) / 100;
-	return usec_count;
-}
 
 /* From timer MDS describing the hardware watchdog:
  * 4.3.1 Watchdog Operation
@@ -126,8 +113,7 @@ static short int watchdog_key = 42;  /* arbitrary 7 bit number */
  * is used though, so set this really low. */
 #define WATCHDOG_MIN_FREE_PAGES 8
 
-void
-reset_watchdog(void)
+void reset_watchdog(void)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -147,8 +133,7 @@ reset_watchdog(void)
 
 /* stop the watchdog - we still need the correct key */
 
-void
-stop_watchdog(void)
+void stop_watchdog(void)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
@@ -162,8 +147,7 @@ stop_watchdog(void)
 
 extern void show_registers(struct pt_regs *regs);
 
-void
-handle_watchdog_bite(struct pt_regs* regs)
+void handle_watchdog_bite(struct pt_regs *regs)
 {
 #if defined(CONFIG_ETRAX_WATCHDOG)
 	extern int cause_of_death;
@@ -203,8 +187,7 @@ handle_watchdog_bite(struct pt_regs* regs)
  */
 extern void cris_do_profile(struct pt_regs *regs);
 
-static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id)
+static inline irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct pt_regs *regs = get_irq_regs();
 	int cpu = smp_processor_id();
@@ -233,7 +216,9 @@ timer_interrupt(int irq, void *dev_id)
 		return IRQ_HANDLED;
 
 	/* Call the real timer interrupt handler */
+	write_seqlock(&xtime_lock);
 	do_timer(1);
+	write_sequnlock(&xtime_lock);
         return IRQ_HANDLED;
 }
 
@@ -246,8 +231,7 @@ static struct irqaction irq_timer = {
 	.name = "timer"
 };
 
-void __init
-cris_timer_init(void)
+void __init cris_timer_init(void)
 {
 	int cpu = smp_processor_id();
 	reg_timer_rw_tmr0_ctrl tmr0_ctrl = { 0 };
@@ -273,8 +257,7 @@ cris_timer_init(void)
 	REG_WR(timer, timer_regs[cpu], rw_intr_mask, timer_intr_mask);
 }
 
-void __init
-time_init(void)
+void __init time_init(void)
 {
 	reg_intr_vect_rw_mask intr_mask;
 
diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
index 9003e382cad..8bbe09c9313 100644
--- a/arch/cris/arch-v32/kernel/traps.c
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -9,8 +9,7 @@
 #include <hwregs/intr_vect_defs.h>
 #include <asm/irq.h>
 
-void
-show_registers(struct pt_regs *regs)
+void show_registers(struct pt_regs *regs)
 {
 	/*
 	 * It's possible to use either the USP register or current->thread.usp.
@@ -101,8 +100,7 @@ bad_value:
 	}
 }
 
-void
-arch_enable_nmi(void)
+void arch_enable_nmi(void)
 {
 	unsigned long flags;
 
diff --git a/arch/cris/arch-v32/lib/checksum.S b/arch/cris/arch-v32/lib/checksum.S
index 87f3fd71ab1..4a72a94a49a 100644
--- a/arch/cris/arch-v32/lib/checksum.S
+++ b/arch/cris/arch-v32/lib/checksum.S
@@ -6,6 +6,7 @@
  */
 
 	.globl	csum_partial
+	.type   csum_partial,@function
 csum_partial:
 
 	;; r10 - src
@@ -83,3 +84,5 @@ _do_byte:
 	addu.b	[$r10],$r12
 	ret
 	move.d	$r12,$r10
+
+	.size   csum_partial, .-csum_partial
diff --git a/arch/cris/arch-v32/lib/checksumcopy.S b/arch/cris/arch-v32/lib/checksumcopy.S
index 21aabe91489..54e209f18b0 100644
--- a/arch/cris/arch-v32/lib/checksumcopy.S
+++ b/arch/cris/arch-v32/lib/checksumcopy.S
@@ -9,6 +9,7 @@
  */
 
 	.globl	csum_partial_copy_nocheck
+	.type   csum_partial_copy_nocheck,@function
 csum_partial_copy_nocheck:
 
 	;; r10 - src
@@ -89,3 +90,5 @@ _do_byte:
 	move.b	$r9,[$r11]
 	ret
 	move.d	$r13,$r10
+
+	.size   csum_partial_copy_nocheck, . - csum_partial_copy_nocheck
diff --git a/arch/cris/arch-v32/lib/spinlock.S b/arch/cris/arch-v32/lib/spinlock.S
index 79087ef59a1..fe610b9d775 100644
--- a/arch/cris/arch-v32/lib/spinlock.S
+++ b/arch/cris/arch-v32/lib/spinlock.S
@@ -6,7 +6,9 @@
 
 
 	.global cris_spin_lock
+	.type   cris_spin_lock,@function
 	.global cris_spin_trylock
+	.type   cris_spin_trylock,@function
 
 	.text
 
@@ -22,6 +24,8 @@ cris_spin_lock:
 	ret
 	nop
 
+	.size   cris_spin_lock, . - cris_spin_lock
+
 cris_spin_trylock:
 	clearf	p
 1:	move.b	[$r10], $r11
@@ -31,3 +35,6 @@ cris_spin_trylock:
         clearf	p
 	ret
 	movu.b	$r11,$r10
+
+	.size   cris_spin_trylock, . - cris_spin_trylock
+
diff --git a/arch/cris/arch-v32/mach-a3/Kconfig b/arch/cris/arch-v32/mach-a3/Kconfig
index a4df06d5997..7796aafc711 100644
--- a/arch/cris/arch-v32/mach-a3/Kconfig
+++ b/arch/cris/arch-v32/mach-a3/Kconfig
@@ -33,6 +33,10 @@ config ETRAX_DDR2_CONFIG
 	hex "DDR2 config"
 	default "0"
 
+config ETRAX_DDR2_LATENCY
+	hex "DDR2 latency"
+	default "0"
+
 config ETRAX_PIO_CE0_CFG
        hex "PIO CE0 configuration"
        default "0"
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
index 94d6b41cb29..ec8648be32d 100644
--- a/arch/cris/arch-v32/mach-a3/dram_init.S
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -24,11 +24,21 @@
 
 	;; Refer to ddr2 MDS for initialization sequence
 
+	; 2. Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
 	; Start clock
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_cfg), $r0
 	move.d   REG_STATE(ddr2, rw_phy_cfg, en, yes), $r1
 	move.d   $r1, [$r0]
 
+	; 2. Wait 200us
+	move.d   10000, $r2
+1:	bne      1b
+	subq     1, $r2
+
 	; Reset phy and start calibration
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_phy_ctrl), $r0
 	move.d   REG_STATE(ddr2, rw_phy_ctrl, rst, yes) | \
@@ -52,6 +62,10 @@ do_cmd:
 	lslq     16, $r1
 	or.d     $r3, $r1
 	move.d   $r1, [$r0]
+	; 2. Wait 200us
+	move.d   10000, $r4
+1:	bne      1b
+	subq     1, $r4
 	cmp.d    sdram_commands_end, $r2
 	blo      command_loop
 	nop
@@ -63,7 +77,7 @@ do_cmd:
 
 	; Set latency
 	move.d   REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency), $r0
-	move.d   0x13, $r1
+	move.d   CONFIG_ETRAX_DDR2_LATENCY, $r1
 	move.d   $r1, [$r0]
 
 	; Set configuration
diff --git a/arch/cris/arch-v32/mach-a3/hw_settings.S b/arch/cris/arch-v32/mach-a3/hw_settings.S
index 258a6329cd4..0145725a1ce 100644
--- a/arch/cris/arch-v32/mach-a3/hw_settings.S
+++ b/arch/cris/arch-v32/mach-a3/hw_settings.S
@@ -31,6 +31,8 @@
 	; Register values
 	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_cfg)
 	.dword CONFIG_ETRAX_DDR2_CONFIG
+	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_latency)
+	.dword CONFIG_ETRAX_DDR2_LATENCY
 	.dword REG_ADDR(ddr2, regi_ddr2_ctrl, rw_timing)
 	.dword CONFIG_ETRAX_DDR2_TIMING
 	.dword CONFIG_ETRAX_DDR2_MRS
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index caeb921a92e..0768bc409ca 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -27,8 +27,7 @@ extern void tlb_init(void);
  * at kseg_4 thus the ksegs are set up again. Also clear the TLB and do various
  * other paging stuff.
  */
-void __init
-cris_mmu_init(void)
+void __init cris_mmu_init(void)
 {
 	unsigned long mmu_config;
 	unsigned long mmu_kbase_hi;
@@ -55,14 +54,23 @@ cris_mmu_init(void)
 	/* Initialise the TLB. Function found in tlb.c. */
 	tlb_init();
 
-	/* Enable exceptions and initialize the kernel segments. */
+	/*
+	 * Enable exceptions and initialize the kernel segments.
+	 * See head.S for differences between ARTPEC-3 and ETRAX FS.
+	 */
 	mmu_config = ( REG_STATE(mmu, rw_mm_cfg, we, on)        |
 		       REG_STATE(mmu, rw_mm_cfg, acc, on)       |
 		       REG_STATE(mmu, rw_mm_cfg, ex, on)        |
 		       REG_STATE(mmu, rw_mm_cfg, inv, on)       |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+		       REG_STATE(mmu, rw_mm_cfg, seg_f, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_e, page)   |
+		       REG_STATE(mmu, rw_mm_cfg, seg_d, linear) |
+#else
 		       REG_STATE(mmu, rw_mm_cfg, seg_f, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_e, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_d, page)   |
+#endif
 		       REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
 		       REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
 #ifndef CONFIG_ETRAX_VCS_SIM
@@ -81,9 +89,15 @@ cris_mmu_init(void)
 		       REG_STATE(mmu, rw_mm_cfg, seg_1, page)   |
 		       REG_STATE(mmu, rw_mm_cfg, seg_0, page));
 
+	/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
 	mmu_kbase_hi = ( REG_FIELD(mmu, rw_mm_kbase_hi, base_f, 0x0) |
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x0) |
+			 REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x5) |
+#else
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 0x8) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_d, 0x0) |
+#endif
                          REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0x4) |
 			 REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) |
 #ifndef CONFIG_ETRAX_VCS_SIM
@@ -129,8 +143,7 @@ cris_mmu_init(void)
 	SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
 }
 
-void __init
-paging_init(void)
+void __init paging_init(void)
 {
 	int i;
 	unsigned long zones_size[MAX_NR_ZONES];
diff --git a/arch/cris/arch-v32/mm/mmu.S b/arch/cris/arch-v32/mm/mmu.S
index f125d912e14..72727c1d8e6 100644
--- a/arch/cris/arch-v32/mm/mmu.S
+++ b/arch/cris/arch-v32/mm/mmu.S
@@ -38,6 +38,7 @@
 ; to handle the fault.
 .macro	MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
 	.globl	\handler
+	.type   \handler,"function"
 \handler:
 	SAVE_ALL
 	move	\mmu, $srs	; Select MMU support register bank
@@ -52,6 +53,7 @@
 	nop
 	ba	ret_from_intr
 	nop
+	.size   \handler, . - \handler
 .endm
 
 ; Refill handler. Three cases may occur:
@@ -84,6 +86,7 @@
 2:	.dword	0		; last_refill_cause
 	.text
 	.globl \handler
+	.type   \handler, "function"
 \handler:
 	subq	4, $sp
 ; (The pipeline stalls for one cycle; $sp used as address in the next cycle.)
@@ -196,6 +199,7 @@
 	; Return
 	ba	ret_from_intr
 	nop
+	.size   \handler, . - \handler
 .endm
 
 	; This is the MMU bus fault handlers.
diff --git a/arch/cris/boot/Makefile b/arch/cris/boot/Makefile
index 144f3afa011..6e3b509fd7f 100644
--- a/arch/cris/boot/Makefile
+++ b/arch/cris/boot/Makefile
@@ -3,7 +3,7 @@
 #
 
 objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
-objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss --remove-section=.note.gnu.build-id
 
 OBJCOPYFLAGS = -O binary $(objcopyflags-y)
 
diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
index 47bc190ba6d..548d886b03d 100644
--- a/arch/cris/boot/compressed/misc.c
+++ b/arch/cris/boot/compressed/misc.c
@@ -106,7 +106,7 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void puts(const char *);
+static void aputs(const char *s);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -137,52 +137,37 @@ static inline void serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#define SEROUT(S, N) \
+	do { \
+		serout(S, regi_ser ## N); \
+		s++; \
+	} while (0)
+#else
+#define SEROUT(S, N) do { \
+		while (!(*R_SERIAL ## N ## _STATUS & (1 << 5))) \
+			; \
+		*R_SERIAL ## N ## _TR_DATA = *s++; \
+	} while (0)
 #endif
 
-static void puts(const char *s)
+static void aputs(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser0);
-#else
-		while (!(*R_SERIAL0_STATUS & (1 << 5)))
-			;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
+		SEROUT(s, 0);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser1);
-#else
-		while (!(*R_SERIAL1_STATUS & (1 << 5)))
-			;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
+		SEROUT(s, 1);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser2);
-#else
-		while (!(*R_SERIAL2_STATUS & (1 << 5)))
-			;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
+		SEROUT(s, 2);
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-#ifdef CONFIG_ETRAX_ARCH_V32
-		serout(s, regi_ser3);
-#else
-		while (!(*R_SERIAL3_STATUS & (1 << 5)))
-			;
-		*R_SERIAL3_TR_DATA = *s++;
+		SEROUT(s, 3);
 #endif
-#endif
-		*s++;
 	}
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
 }
 
 void *memset(void *s, int c, size_t n)
@@ -233,9 +218,9 @@ static void flush_window(void)
 
 static void error(char *x)
 {
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
+	aputs("\n\n");
+	aputs(x);
+	aputs("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
@@ -378,14 +363,14 @@ void decompress_kernel(void)
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
 	if (revision < compile_rev) {
 #ifdef CONFIG_ETRAX_ARCH_V32
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+		aputs("You need at least ETRAX FS to run Linux 2.6/crisv32\n");
 #else
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
+		aputs("You need an ETRAX 100LX to run linux 2.6/crisv10\n");
 #endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\n");
+	aputs("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel\n");
+	aputs("Done. Now booting the kernel\n");
 }
diff --git a/arch/cris/include/arch-v32/arch/cache.h b/arch/cris/include/arch-v32/arch/cache.h
index dfc73050e6b..1de779f4f24 100644
--- a/arch/cris/include/arch-v32/arch/cache.h
+++ b/arch/cris/include/arch-v32/arch/cache.h
@@ -7,6 +7,8 @@
 #define L1_CACHE_BYTES 32
 #define L1_CACHE_SHIFT 5
 
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
 void flush_dma_list(dma_descr_data *descr);
 void flush_dma_descr(dma_descr_data *descr, int flush_buf);
 
diff --git a/arch/cris/include/arch-v32/arch/dma.h b/arch/cris/include/arch-v32/arch/dma.h
index 3674081389f..61906153a9a 100644
--- a/arch/cris/include/arch-v32/arch/dma.h
+++ b/arch/cris/include/arch-v32/arch/dma.h
@@ -1,79 +1 @@
-#ifndef _ASM_ARCH_CRIS_DMA_H
-#define _ASM_ARCH_CRIS_DMA_H
-
-/* Defines for using and allocating dma channels. */
-
-#define MAX_DMA_CHANNELS	10
-
-#define NETWORK_ETH0_TX_DMA_NBR 0	/* Ethernet 0 out. */
-#define NETWORK_ETH0 RX_DMA_NBR 1	/* Ethernet 0 in. */
-
-#define IO_PROC_DMA0_TX_DMA_NBR 2	/* IO processor DMA0 out. */
-#define IO_PROC_DMA0_RX_DMA_NBR 3	/* IO processor DMA0 in. */
-
-#define ATA_TX_DMA_NBR 2		/* ATA interface out. */
-#define ATA_RX_DMA_NBR 3		/* ATA interface in. */
-
-#define ASYNC_SER2_TX_DMA_NBR 2		/* Asynchronous serial port 2 out. */
-#define ASYNC_SER2_RX_DMA_NBR 3		/* Asynchronous serial port 2 in. */
-
-#define IO_PROC_DMA1_TX_DMA_NBR 4	/* IO processor DMA1 out. */
-#define IO_PROC_DMA1_RX_DMA_NBR 5	/* IO processor DMA1 in. */
-
-#define ASYNC_SER1_TX_DMA_NBR 4		/* Asynchronous serial port 1 out. */
-#define ASYNC_SER1_RX_DMA_NBR 5		/* Asynchronous serial port 1 in. */
-
-#define SYNC_SER0_TX_DMA_NBR 4		/* Synchronous serial port 0 out. */
-#define SYNC_SER0_RX_DMA_NBR 5		/* Synchronous serial port 0 in. */
-
-#define EXTDMA0_TX_DMA_NBR 6		/* External DMA 0 out. */
-#define EXTDMA1_RX_DMA_NBR 7		/* External DMA 1 in. */
-
-#define ASYNC_SER0_TX_DMA_NBR 6		/* Asynchronous serial port 0 out. */
-#define ASYNC_SER0_RX_DMA_NBR 7		/* Asynchronous serial port 0 in. */
-
-#define SYNC_SER1_TX_DMA_NBR 6		/* Synchronous serial port 1 out. */
-#define SYNC_SER1_RX_DMA_NBR 7		/* Synchronous serial port 1 in. */
-
-#define NETWORK_ETH1_TX_DMA_NBR 6	/* Ethernet 1 out. */
-#define NETWORK_ETH1_RX_DMA_NBR 7	/* Ethernet 1 in. */
-
-#define EXTDMA2_TX_DMA_NBR 8		/* External DMA 2 out. */
-#define EXTDMA3_RX_DMA_NBR 9		/* External DMA 3 in. */
-
-#define STRCOP_TX_DMA_NBR 8		/* Stream co-processor out. */
-#define STRCOP_RX_DMA_NBR 9		/* Stream co-processor in. */
-
-#define ASYNC_SER3_TX_DMA_NBR 8		/* Asynchronous serial port 3 out. */
-#define ASYNC_SER3_RX_DMA_NBR 9		/* Asynchronous serial port 3 in. */
-
-enum dma_owner
-{
-  dma_eth0,
-  dma_eth1,
-  dma_iop0,
-  dma_iop1,
-  dma_ser0,
-  dma_ser1,
-  dma_ser2,
-  dma_ser3,
-  dma_sser0,
-  dma_sser1,
-  dma_ata,
-  dma_strp,
-  dma_ext0,
-  dma_ext1,
-  dma_ext2,
-  dma_ext3
-};
-
-int crisv32_request_dma(unsigned int dmanr, const char * device_id,
-                        unsigned options, unsigned bandwidth, enum dma_owner owner);
-void crisv32_free_dma(unsigned int dmanr);
-
-/* Masks used by crisv32_request_dma options: */
-#define DMA_VERBOSE_ON_ERROR 1
-#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
-#define DMA_INT_MEM 4
-
-#endif /* _ASM_ARCH_CRIS_DMA_H */
+#include "mach/dma.h"
diff --git a/arch/cris/include/arch-v32/arch/io.h b/arch/cris/include/arch-v32/arch/io.h
index 72024452cea..adc5484351b 100644
--- a/arch/cris/include/arch-v32/arch/io.h
+++ b/arch/cris/include/arch-v32/arch/io.h
@@ -46,10 +46,12 @@ static inline void crisv32_io_set(struct crisv32_iopin *iopin, int val)
 	unsigned long flags;
 	spin_lock_irqsave(&iopin->port->lock, flags);
 
-	if (val)
-		*iopin->port->data |= iopin->bit;
-	else
-		*iopin->port->data &= ~iopin->bit;
+	if (iopin->port->data) {
+		if (val)
+			*iopin->port->data |= iopin->bit;
+		else
+			*iopin->port->data &= ~iopin->bit;
+	}
 
 	spin_unlock_irqrestore(&iopin->port->lock, flags);
 }
@@ -60,10 +62,12 @@ static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin,
 	unsigned long flags;
 	spin_lock_irqsave(&iopin->port->lock, flags);
 
-	if (dir == crisv32_io_dir_in)
-		*iopin->port->oe &= ~iopin->bit;
-	else
-		*iopin->port->oe |= iopin->bit;
+	if (iopin->port->oe) {
+		if (dir == crisv32_io_dir_in)
+			*iopin->port->oe &= ~iopin->bit;
+		else
+			*iopin->port->oe |= iopin->bit;
+	}
 
 	spin_unlock_irqrestore(&iopin->port->lock, flags);
 }
diff --git a/arch/cris/include/arch-v32/arch/memmap.h b/arch/cris/include/arch-v32/arch/memmap.h
index d29df5644d3..81985c0a678 100644
--- a/arch/cris/include/arch-v32/arch/memmap.h
+++ b/arch/cris/include/arch-v32/arch/memmap.h
@@ -1,24 +1 @@
-#ifndef _ASM_ARCH_MEMMAP_H
-#define _ASM_ARCH_MEMMAP_H
-
-#define MEM_CSE0_START (0x00000000)
-#define MEM_CSE0_SIZE (0x04000000)
-#define MEM_CSE1_START (0x04000000)
-#define MEM_CSE1_SIZE (0x04000000)
-#define MEM_CSR0_START (0x08000000)
-#define MEM_CSR1_START (0x0c000000)
-#define MEM_CSP0_START (0x10000000)
-#define MEM_CSP1_START (0x14000000)
-#define MEM_CSP2_START (0x18000000)
-#define MEM_CSP3_START (0x1c000000)
-#define MEM_CSP4_START (0x20000000)
-#define MEM_CSP5_START (0x24000000)
-#define MEM_CSP6_START (0x28000000)
-#define MEM_CSP7_START (0x2c000000)
-#define MEM_INTMEM_START (0x38000000)
-#define MEM_INTMEM_SIZE (0x00020000)
-#define MEM_DRAM_START (0x40000000)
-
-#define MEM_NON_CACHEABLE (0x80000000)
-
-#endif
+#include <mach/memmap.h>
diff --git a/arch/cris/include/arch-v32/arch/pgtable.h b/arch/cris/include/arch-v32/arch/pgtable.h
index 08cb7ff7e4e..c1051a8da33 100644
--- a/arch/cris/include/arch-v32/arch/pgtable.h
+++ b/arch/cris/include/arch-v32/arch/pgtable.h
@@ -2,8 +2,16 @@
 #define _ASM_CRIS_ARCH_PGTABLE_H
 
 /* Define the kernels virtual memory area. */
+
+/* See head.S for differences between ARTPEC-3 and ETRAX FS. */
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#define VMALLOC_START          KSEG_E
+#define VMALLOC_END            KSEG_F
+#else
 #define VMALLOC_START		KSEG_D
 #define VMALLOC_END		KSEG_E
+#endif
+
 #define VMALLOC_VMADDR(x)	((unsigned long)(x))
 
 #endif /* _ASM_CRIS_ARCH_PGTABLE_H */
diff --git a/arch/cris/include/arch-v32/arch/uaccess.h b/arch/cris/include/arch-v32/arch/uaccess.h
index 6b207f1b662..3196019706c 100644
--- a/arch/cris/include/arch-v32/arch/uaccess.h
+++ b/arch/cris/include/arch-v32/arch/uaccess.h
@@ -122,14 +122,14 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
 	__asm__ __volatile__ (
 		"	move.d %3,%0\n"
 		"5:	move.b [%2+],$acr\n"
-		"1:	beq 2f\n"
+		"1:	beq 6f\n"
 		"	move.b $acr,[%1+]\n"
 
 		"	subq 1,%0\n"
 		"2:	bne 1b\n"
 		"	move.b [%2+],$acr\n"
 
-		"	sub.d %3,%0\n"
+		"6:	sub.d %3,%0\n"
 		"	neg.d %0,%0\n"
 		"3:\n"
 		"	.section .fixup,\"ax\"\n"
@@ -140,8 +140,7 @@ __do_strncpy_from_user(char *dst, const char *src, long count)
 		/* The address for a fault at the first move is trivial.
 		   The address for a fault at the second move is that of
 		   the preceding branch insn, since the move insn is in
-		   its delay-slot.  That address is also a branch
-		   target.  Just so you don't get confused...  */
+		   its delay-slot.  Just so you don't get confused...  */
 		"	.previous\n"
 		"	.section __ex_table,\"a\"\n"
 		"	.dword 5b,4b\n"
diff --git a/arch/cris/include/arch-v32/mach-a3/mach/dma.h b/arch/cris/include/arch-v32/mach-a3/mach/dma.h
index 9e8eb13b601..f01dca1ad10 100644
--- a/arch/cris/include/arch-v32/mach-a3/mach/dma.h
+++ b/arch/cris/include/arch-v32/mach-a3/mach/dma.h
@@ -5,6 +5,33 @@
 
 #define MAX_DMA_CHANNELS	12 /* 8 and 10 not used. */
 
+#define NETWORK_ETH_TX_DMA_NBR 0        /* Ethernet 0 out. */
+#define NETWORK_ETH_RX_DMA_NBR 1        /* Ethernet 0 in. */
+
+#define IO_PROC_DMA_TX_DMA_NBR 4        /* IO processor DMA0 out. */
+#define IO_PROC_DMA_RX_DMA_NBR 5        /* IO processor DMA0 in. */
+
+#define ASYNC_SER3_TX_DMA_NBR 2         /* Asynchronous serial port 3 out. */
+#define ASYNC_SER3_RX_DMA_NBR 3         /* Asynchronous serial port 3 in. */
+
+#define ASYNC_SER2_TX_DMA_NBR 6         /* Asynchronous serial port 2 out. */
+#define ASYNC_SER2_RX_DMA_NBR 7         /* Asynchronous serial port 2 in. */
+
+#define ASYNC_SER1_TX_DMA_NBR 4         /* Asynchronous serial port 1 out. */
+#define ASYNC_SER1_RX_DMA_NBR 5         /* Asynchronous serial port 1 in. */
+
+#define SYNC_SER_TX_DMA_NBR 6           /* Synchronous serial port 0 out. */
+#define SYNC_SER_RX_DMA_NBR 7           /* Synchronous serial port 0 in. */
+
+#define ASYNC_SER0_TX_DMA_NBR 0         /* Asynchronous serial port 0 out. */
+#define ASYNC_SER0_RX_DMA_NBR 1         /* Asynchronous serial port 0 in. */
+
+#define STRCOP_TX_DMA_NBR 2             /* Stream co-processor out. */
+#define STRCOP_RX_DMA_NBR 3             /* Stream co-processor in. */
+
+#define dma_eth0 dma_eth
+#define dma_eth1 dma_eth
+
 enum dma_owner {
 	dma_eth,
 	dma_ser0,
diff --git a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
index 2f23e5e16f4..2d52bcc96ed 100644
--- a/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
+++ b/arch/cris/include/arch-v32/mach-a3/mach/startup.inc
@@ -1,9 +1,19 @@
+#ifndef STARTUP_INC_INCLUDED
+#define STARTUP_INC_INCLUDED
+
 #include <hwregs/asm/reg_map_asm.h>
 #include <hwregs/asm/gio_defs_asm.h>
 #include <hwregs/asm/pio_defs_asm.h>
 #include <hwregs/asm/clkgen_defs_asm.h>
 #include <hwregs/asm/pinmux_defs_asm.h>
 
+	.macro GIO_SET_P BITS, OUTREG
+	bmi	1f		; btstq: bit -> N flag
+	nop
+	or.d	\BITS, \OUTREG
+1:
+	.endm
+
 	.macro GIO_INIT
 	move.d	CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
 	move.d	REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
@@ -32,10 +42,23 @@
 	move.d	0xFFFFFFFF, $r0
 	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
 	move.d	$r0, [$r1]
-	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
-	move.d	$r0, [$r1]
 	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
 	move.d	$r0, [$r1]
+
+	;; If eth_mdio, eth, geth bits are set in hwprot, don't
+	;; set them to gpio, as this means they have been configured
+	;; earlier and shouldn't be changed.
+	move.d	0xFC000000, $r2 ; pins 25..0 are eth_mdio, eth, geth
+	move.d	REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
+	move.d	[$r1], $r0
+	btstq	REG_BIT(pinmux, rw_hwprot, eth), $r0
+	GIO_SET_P 0x00FFFF00, $r2		;; pins 8..23 are eth
+	btstq	REG_BIT(pinmux, rw_hwprot, eth_mdio), $r0
+	GIO_SET_P 0x03000000, $r2		;; pins 24..25 are eth_mdio
+	btstq	REG_BIT(pinmux, rw_hwprot, geth), $r0
+	GIO_SET_P 0x000000FF, $r2		;; pins 0..7 are geth
+	move.d	REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
+	move.d	$r2, [$r1]
 	.endm
 
 	.macro START_CLOCKS
@@ -58,3 +81,4 @@
 	move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
 	move.d $r1, [$r0]
 	.endm
+#endif
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/dma.h b/arch/cris/include/arch-v32/mach-fs/mach/dma.h
new file mode 100644
index 00000000000..a8c59292586
--- /dev/null
+++ b/arch/cris/include/arch-v32/mach-fs/mach/dma.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_ARCH_CRIS_DMA_H
+#define _ASM_ARCH_CRIS_DMA_H
+
+/* Defines for using and allocating dma channels. */
+
+#define MAX_DMA_CHANNELS	10
+
+#define NETWORK_ETH0_TX_DMA_NBR 0	/* Ethernet 0 out. */
+#define NETWORK_ETH0 RX_DMA_NBR 1	/* Ethernet 0 in. */
+
+#define IO_PROC_DMA0_TX_DMA_NBR 2	/* IO processor DMA0 out. */
+#define IO_PROC_DMA0_RX_DMA_NBR 3	/* IO processor DMA0 in. */
+
+#define ATA_TX_DMA_NBR 2		/* ATA interface out. */
+#define ATA_RX_DMA_NBR 3		/* ATA interface in. */
+
+#define ASYNC_SER2_TX_DMA_NBR 2		/* Asynchronous serial port 2 out. */
+#define ASYNC_SER2_RX_DMA_NBR 3		/* Asynchronous serial port 2 in. */
+
+#define IO_PROC_DMA1_TX_DMA_NBR 4	/* IO processor DMA1 out. */
+#define IO_PROC_DMA1_RX_DMA_NBR 5	/* IO processor DMA1 in. */
+
+#define ASYNC_SER1_TX_DMA_NBR 4		/* Asynchronous serial port 1 out. */
+#define ASYNC_SER1_RX_DMA_NBR 5		/* Asynchronous serial port 1 in. */
+
+#define SYNC_SER0_TX_DMA_NBR 4		/* Synchronous serial port 0 out. */
+#define SYNC_SER0_RX_DMA_NBR 5		/* Synchronous serial port 0 in. */
+
+#define EXTDMA0_TX_DMA_NBR 6		/* External DMA 0 out. */
+#define EXTDMA1_RX_DMA_NBR 7		/* External DMA 1 in. */
+
+#define ASYNC_SER0_TX_DMA_NBR 6		/* Asynchronous serial port 0 out. */
+#define ASYNC_SER0_RX_DMA_NBR 7		/* Asynchronous serial port 0 in. */
+
+#define SYNC_SER1_TX_DMA_NBR 6		/* Synchronous serial port 1 out. */
+#define SYNC_SER1_RX_DMA_NBR 7		/* Synchronous serial port 1 in. */
+
+#define NETWORK_ETH1_TX_DMA_NBR 6	/* Ethernet 1 out. */
+#define NETWORK_ETH1_RX_DMA_NBR 7	/* Ethernet 1 in. */
+
+#define EXTDMA2_TX_DMA_NBR 8		/* External DMA 2 out. */
+#define EXTDMA3_RX_DMA_NBR 9		/* External DMA 3 in. */
+
+#define STRCOP_TX_DMA_NBR 8		/* Stream co-processor out. */
+#define STRCOP_RX_DMA_NBR 9		/* Stream co-processor in. */
+
+#define ASYNC_SER3_TX_DMA_NBR 8		/* Asynchronous serial port 3 out. */
+#define ASYNC_SER3_RX_DMA_NBR 9		/* Asynchronous serial port 3 in. */
+
+enum dma_owner {
+  dma_eth0,
+  dma_eth1,
+  dma_iop0,
+  dma_iop1,
+  dma_ser0,
+  dma_ser1,
+  dma_ser2,
+  dma_ser3,
+  dma_sser0,
+  dma_sser1,
+  dma_ata,
+  dma_strp,
+  dma_ext0,
+  dma_ext1,
+  dma_ext2,
+  dma_ext3
+};
+
+int crisv32_request_dma(unsigned int dmanr, const char *device_id,
+			unsigned options, unsigned bandwidth,
+			enum dma_owner owner);
+void crisv32_free_dma(unsigned int dmanr);
+
+/* Masks used by crisv32_request_dma options: */
+#define DMA_VERBOSE_ON_ERROR 1
+#define DMA_PANIC_ON_ERROR (2|DMA_VERBOSE_ON_ERROR)
+#define DMA_INT_MEM 4
+
+#endif /* _ASM_ARCH_CRIS_DMA_H */
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/memmap.h b/arch/cris/include/arch-v32/mach-fs/mach/memmap.h
new file mode 100644
index 00000000000..d29df5644d3
--- /dev/null
+++ b/arch/cris/include/arch-v32/mach-fs/mach/memmap.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_ARCH_MEMMAP_H
+#define _ASM_ARCH_MEMMAP_H
+
+#define MEM_CSE0_START (0x00000000)
+#define MEM_CSE0_SIZE (0x04000000)
+#define MEM_CSE1_START (0x04000000)
+#define MEM_CSE1_SIZE (0x04000000)
+#define MEM_CSR0_START (0x08000000)
+#define MEM_CSR1_START (0x0c000000)
+#define MEM_CSP0_START (0x10000000)
+#define MEM_CSP1_START (0x14000000)
+#define MEM_CSP2_START (0x18000000)
+#define MEM_CSP3_START (0x1c000000)
+#define MEM_CSP4_START (0x20000000)
+#define MEM_CSP5_START (0x24000000)
+#define MEM_CSP6_START (0x28000000)
+#define MEM_CSP7_START (0x2c000000)
+#define MEM_INTMEM_START (0x38000000)
+#define MEM_INTMEM_SIZE (0x00020000)
+#define MEM_DRAM_START (0x40000000)
+
+#define MEM_NON_CACHEABLE (0x80000000)
+
+#endif
diff --git a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
index 4a10ccbd6cc..dd1abbdcbc7 100644
--- a/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
+++ b/arch/cris/include/arch-v32/mach-fs/mach/startup.inc
@@ -1,3 +1,6 @@
+#ifndef STARTUP_INC_INCLUDED
+#define STARTUP_INC_INCLUDED
+
 #include <hwregs/asm/reg_map_asm.h>
 #include <hwregs/asm/bif_core_defs_asm.h>
 #include <hwregs/asm/gio_defs_asm.h>
@@ -75,3 +78,5 @@
 	move.d $r10, [$r11]
 #endif
 	.endm
+
+#endif
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index 38f1c8e1770..d474818a537 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -21,31 +21,35 @@
  * /dev/leds   minor 2, Access to leds depending on kernelconfig
  *
  * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
- * /dev/gpioa  minor 0,  8 bit GPIO, each bit can change direction
- * /dev/gpiob  minor 1, 18 bit GPIO, each bit can change direction
- * /dev/gpioc  minor 3, 18 bit GPIO, each bit can change direction
- * /dev/gpiod  minor 4, 18 bit GPIO, each bit can change direction
+ * /dev/gpioa  minor 0, 32 bit GPIO, each bit can change direction
+ * /dev/gpiob  minor 1, 32 bit GPIO, each bit can change direction
+ * /dev/gpioc  minor 3, 16 bit GPIO, each bit can change direction
+ * /dev/gpiod  minor 4, 32 bit GPIO, input only
  * /dev/leds   minor 2, Access to leds depending on kernelconfig
  * /dev/pwm0   minor 16, PWM channel 0 on PA30
  * /dev/pwm1   minor 17, PWM channel 1 on PA31
  * /dev/pwm2   minor 18, PWM channel 2 on PB26
+ * /dev/ppwm   minor 19, PPWM channel
  *
  */
 #ifndef _ASM_ETRAXGPIO_H
 #define _ASM_ETRAXGPIO_H
 
+#define GPIO_MINOR_FIRST 0
+
+#define ETRAXGPIO_IOCTYPE 43
+
 /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
 #ifdef CONFIG_ETRAX_ARCH_V10
-#define ETRAXGPIO_IOCTYPE 43
 #define GPIO_MINOR_A 0
 #define GPIO_MINOR_B 1
 #define GPIO_MINOR_LEDS 2
 #define GPIO_MINOR_G 3
 #define GPIO_MINOR_LAST 3
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
 #endif
 
 #ifdef CONFIG_ETRAXFS
-#define ETRAXGPIO_IOCTYPE 43
 #define GPIO_MINOR_A 0
 #define GPIO_MINOR_B 1
 #define GPIO_MINOR_LEDS 2
@@ -58,10 +62,10 @@
 #else
 #define GPIO_MINOR_LAST 5
 #endif
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
 #endif
 
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
-#define ETRAXGPIO_IOCTYPE 43
 #define GPIO_MINOR_A 0
 #define GPIO_MINOR_B 1
 #define GPIO_MINOR_LEDS 2
@@ -73,12 +77,17 @@
 #else
 #define GPIO_MINOR_LAST 4
 #endif
-#define GPIO_MINOR_PWM0 16
-#define GPIO_MINOR_PWM1 17
-#define GPIO_MINOR_PWM2 18
-#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PWM2
+#define GPIO_MINOR_FIRST_PWM 16
+#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
+#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
+#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
+#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
+#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
+#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
 #endif
 
+
+
 /* supported ioctl _IOC_NR's */
 
 #define IO_READBITS  0x1  /* read and return current port bits (obsolete) */
@@ -125,12 +134,10 @@
  */
 #define IO_READ_INBITS   0x10 /* *arg is result of reading the input pins */
 #define IO_READ_OUTBITS  0x11 /* *arg is result of reading the output shadow */
-#define IO_SETGET_INPUT  0x12 /* bits set in *arg is set to input,
-                               * *arg updated with current input pins.
-                               */
-#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output,
-                               * *arg updated with current output pins.
-                               */
+#define IO_SETGET_INPUT  0x12 /* bits set in *arg is set to input, */
+			      /* *arg updated with current input pins. */
+#define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
+			      /* *arg updated with current output pins. */
 
 /* The following ioctl's are applicable to the PWM channels only */
 
@@ -140,7 +147,8 @@ enum io_pwm_mode {
 	PWM_OFF = 0,		/* disabled, deallocated */
 	PWM_STANDARD = 1,	/* 390 kHz, duty cycle 0..255/256 */
 	PWM_FAST = 2,		/* variable freq, w/ 10ns active pulse len */
-	PWM_VARFREQ = 3		/* individually configurable high/low periods */
+	PWM_VARFREQ = 3,	/* individually configurable high/low periods */
+	PWM_SOFT = 4		/* software generated */
 };
 
 struct io_pwm_set_mode {
@@ -176,4 +184,56 @@ struct io_pwm_set_duty {
 	int duty;		/* 0..255 */
 };
 
+/* Returns information about the latest PWM pulse.
+ * lo: Length of the latest low period, in units of 10ns.
+ * hi: Length of the latest high period, in units of 10ns.
+ * cnt: Time since last detected edge, in units of 10ns.
+ *
+ * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_GET_PERIOD   0x23
+
+struct io_pwm_get_period {
+	unsigned int lo;
+	unsigned int hi;
+	unsigned int cnt;
+};
+
+/* Sets the input source for the PWM input. For the src value see the
+ * register description for gio:rw_pwm_in_cfg.
+ *
+ * NOTE: All PWM devices is connected to the same input source.
+ */
+#define IO_PWM_SET_INPUT_SRC   0x24
+struct io_pwm_set_input_src {
+	unsigned int src;	/* 0..7 */
+};
+
+/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
+#define IO_PPWM_SET_DUTY     0x25
+
+struct io_ppwm_set_duty {
+	int duty;		/* 0..255 */
+};
+
+/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
+ * PWM capable gpio pins:
+ */
+#define IO_PWMCLK_SETGET_CONFIG 0x26
+struct gpio_pwmclk_conf {
+  unsigned int gpiopin; /* The pin number based on the opened device */
+  unsigned int baseclk; /* The base clock to use, or sw will select one close*/
+  unsigned int low;     /* The number of low periods of the baseclk */
+  unsigned int high;    /* The number of high periods of the baseclk */
+};
+
+/* Examples:
+ * To get a symmetric 12 MHz clock without knowing anything about the hardware:
+ * baseclk = 12000000, low = 0, high = 0
+ * To just get info of current setting:
+ * baseclk = 0, low = 0, high = 0, the values will be updated by driver.
+ */
+
 #endif
diff --git a/arch/cris/include/asm/ioctls.h b/arch/cris/include/asm/ioctls.h
index 35bbc181598..076c07824eb 100644
--- a/arch/cris/include/asm/ioctls.h
+++ b/arch/cris/include/asm/ioctls.h
@@ -77,6 +77,7 @@
 #define TIOCSERSETRS485	0x5461  /* enable rs-485 (deprecated) */
 #define TIOCSERWRRS485	0x5462  /* write rs-485 */
 #define TIOCSRS485	0x5463  /* enable rs-485 */
+#define TIOCGRS485	0x542E  /* get rs-485 */
 
 /* Used for packet mode */
 #define TIOCPKT_DATA		 0
diff --git a/arch/cris/include/asm/local64.h b/arch/cris/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/cris/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/cris/include/asm/sync_serial.h b/arch/cris/include/asm/sync_serial.h
index d87c24df2b3..7f827fea30e 100644
--- a/arch/cris/include/asm/sync_serial.h
+++ b/arch/cris/include/asm/sync_serial.h
@@ -19,6 +19,7 @@
 #define SSP_OPOLARITY  _IOR('S', 4, unsigned int)
 #define SSP_SPI        _IOR('S', 5, unsigned int)
 #define SSP_INBUFCHUNK _IOR('S', 6, unsigned int)
+#define SSP_INPUT      _IOR('S', 7, unsigned int)
 
 /* Values for SSP_SPEED */
 #define SSP150        0
@@ -37,6 +38,7 @@
 #define SSP921600    13
 #define SSP3125000   14
 #define CODEC        15
+#define CODEC_f32768 16
 
 #define FREQ_4MHz   0
 #define FREQ_2MHz   1
@@ -46,9 +48,14 @@
 #define FREQ_128kHz 5
 #define FREQ_64kHz  6
 #define FREQ_32kHz  7
+/* FREQ_* with values where bit (value & 0x10) is set are */
+/* used for CODEC_f32768 */
+#define FREQ_4096kHz 16 /* CODEC_f32768 */
 
 /* Used by application to set CODEC divider, word rate and frame rate */
-#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) (CODEC | (freq << 8) | (clk_per_sync << 16) | (sync_per_frame << 28))
+#define CODEC_VAL(freq, clk_per_sync, sync_per_frame) \
+	((CODEC + ((freq & 0x10) >> 4)) | (freq << 8) | \
+		   (clk_per_sync << 16) | (sync_per_frame << 28))
 
 /* Used by driver to extract speed */
 #define GET_SPEED(x) (x & 0xff)
@@ -68,6 +75,7 @@
 #define NORMAL_SYNC                1
 #define EARLY_SYNC                 2
 #define SECOND_WORD_SYNC     0x40000
+#define LATE_SYNC            0x80000
 
 #define BIT_SYNC                   4
 #define WORD_SYNC                  8
@@ -104,4 +112,21 @@
 /* Values for SSP_INBUFCHUNK */
 /* plain integer with the size of DMA chunks */
 
+/* To ensure that the timestamps are aligned with the data being read
+ * the read length MUST be a multiple of the length of the DMA buffers.
+ *
+ * Use a multiple of SSP_INPUT_CHUNK_SIZE defined below.
+ */
+#define SSP_INPUT_CHUNK_SIZE  256
+
+/* Request struct to pass through the ioctl interface to read
+ * data with timestamps.
+ */
+struct ssp_request {
+	char __user *buf;	/* Where to put the data. */
+	size_t len;		/* Size of buf. MUST be a multiple of */
+				/* SSP_INPUT_CHUNK_SIZE! */
+	struct timespec ts;	/* The time the data was sampled. */
+};
+
 #endif
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index b917549a7d9..195ec5fa0dd 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -9,12 +9,11 @@
 
 #define SAMPLE_BUFFER_SIZE 8192
 
-static char* sample_buffer;
-static char* sample_buffer_pos;
+static char *sample_buffer;
+static char *sample_buffer_pos;
 static int prof_running = 0;
 
-void
-cris_profile_sample(struct pt_regs* regs)
+void cris_profile_sample(struct pt_regs *regs)
 {
 	if (!prof_running)
 		return;
@@ -24,7 +23,7 @@ cris_profile_sample(struct pt_regs* regs)
 	else
 		*(unsigned int*)sample_buffer_pos = 0;
 
-	*(unsigned int*)(sample_buffer_pos + 4) = instruction_pointer(regs);
+	*(unsigned int *)(sample_buffer_pos + 4) = instruction_pointer(regs);
 	sample_buffer_pos += 8;
 
 	if (sample_buffer_pos == sample_buffer + SAMPLE_BUFFER_SIZE)
@@ -54,6 +53,7 @@ write_cris_profile(struct file *file, const char __user *buf,
 {
 	sample_buffer_pos = sample_buffer;
 	memset(sample_buffer, 0, SAMPLE_BUFFER_SIZE);
+	return count < SAMPLE_BUFFER_SIZE ? count : SAMPLE_BUFFER_SIZE;
 }
 
 static const struct file_operations cris_proc_profile_operations = {
@@ -61,8 +61,7 @@ static const struct file_operations cris_proc_profile_operations = {
 	.write		= write_cris_profile,
 };
 
-static int
-__init init_cris_profile(void)
+static int __init init_cris_profile(void)
 {
 	struct proc_dir_entry *entry;
 
@@ -82,5 +81,5 @@ __init init_cris_profile(void)
 
 	return 0;
 }
-
 __initcall(init_cris_profile);
+
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index c72730d20ef..b5096430ce1 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -39,13 +39,16 @@ int have_rtc;  /* used to remember if we have an RTC or not */;
 extern unsigned long loops_per_jiffy; /* init/main.c */
 unsigned long loops_per_usec;
 
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 extern unsigned long do_slow_gettimeoffset(void);
 static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
 
 u32 arch_gettimeoffset(void)
 {
-	return do_gettimeoffset() * 1000;
+       return do_gettimeoffset() * 1000;
 }
+#endif
 
 /*
  * BUG: This routine does not handle hour overflow properly; it just
@@ -151,7 +154,7 @@ cris_do_profile(struct pt_regs* regs)
 
 unsigned long long sched_clock(void)
 {
-	return (unsigned long long)jiffies * (1000000000 / HZ) +
+	return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ) +
 		get_ns_in_jiffie();
 }
 
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index d49d17d2a14..442218980db 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -58,6 +58,8 @@ SECTIONS
 	___data_start = . ;
 	__Sdata = . ;
 	.data : {			/* Data */
+		CACHELINE_ALIGNED_DATA(32)
+		READ_MOSTLY_DATA(32)
 		DATA_DATA
 	}
 	__edata = . ;			/* End of data section. */
@@ -84,6 +86,16 @@ SECTIONS
 	}
 	SECURITY_INIT
 
+	/* .exit.text is discarded at runtime, not link time,
+	 * to deal with references from __bug_table
+	 */
+	.exit.text : {
+		EXIT_TEXT
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+
 #ifdef CONFIG_ETRAX_ARCH_V10
 #ifdef CONFIG_BLK_DEV_INITRD
 	.init.ramfs : {
@@ -112,7 +124,7 @@ SECTIONS
 	__init_end = .;
 
 	__data_end = . ;		/* Move to _edata ? */
-	BSS_SECTION(0, 0, 0)
+	BSS_SECTION(1, 1, 1)
 
 	. =  ALIGN (0x20);
 	_end = .;
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 380df1a73a6..9dcac8ec8fa 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -1,19 +1,18 @@
 /*
- *  linux/arch/cris/mm/fault.c
- *
- *  Copyright (C) 2000-2006  Axis Communications AB
- *
- *  Authors:  Bjorn Wesen
+ *  arch/cris/mm/fault.c
  *
+ *  Copyright (C) 2000-2010  Axis Communications AB
  */
 
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/wait.h>
 #include <asm/uaccess.h>
 
 extern int find_fixup_code(struct pt_regs *);
 extern void die_if_kernel(const char *, struct pt_regs *, long);
+extern void show_registers(struct pt_regs *regs);
 
 /* debug of low-level TLB reload */
 #undef DEBUG
@@ -108,11 +107,11 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	info.si_code = SEGV_MAPERR;
 
 	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
+	 * If we're in an interrupt or "atomic" operation or have no
+	 * user context, we must not take the fault.
 	 */
 
-	if (in_interrupt() || !mm)
+	if (in_atomic() || !mm)
 		goto no_context;
 
 	down_read(&mm->mmap_sem);
@@ -193,14 +192,25 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 	/* User mode accesses just cause a SIGSEGV */
 
 	if (user_mode(regs)) {
+		printk(KERN_NOTICE "%s (pid %d) segfaults for page "
+			"address %08lx at pc %08lx\n",
+			tsk->comm, tsk->pid,
+			address, instruction_pointer(regs));
+
+		/* With DPG on, we've already dumped registers above.  */
+		DPG(if (0))
+			show_registers(regs);
+
+#ifdef CONFIG_NO_SEGFAULT_TERMINATION
+		DECLARE_WAIT_QUEUE_HEAD(wq);
+		wait_event_interruptible(wq, 0 == 1);
+#else
 		info.si_signo = SIGSEGV;
 		info.si_errno = 0;
 		/* info.si_code has been set above */
 		info.si_addr = (void *)address;
 		force_sig_info(SIGSEGV, &info, tsk);
-		printk(KERN_NOTICE "%s (pid %d) segfaults for page "
-		       "address %08lx at pc %08lx\n",
-		       tsk->comm, tsk->pid, address, instruction_pointer(regs));
+#endif
 		return;
 	}
 
@@ -245,10 +255,10 @@ do_page_fault(unsigned long address, struct pt_regs *regs,
 
  out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", tsk->comm);
-	if (user_mode(regs))
-		do_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	up_read(&mm->mmap_sem);
@@ -334,8 +344,11 @@ int
 find_fixup_code(struct pt_regs *regs)
 {
 	const struct exception_table_entry *fixup;
+	/* in case of delay slot fault (v32) */
+	unsigned long ip = (instruction_pointer(regs) & ~0x1);
 
-	if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) {
+	fixup = search_exception_tables(ip);
+	if (fixup != 0) {
 		/* Adjust the instruction pointer in the stackframe. */
 		instruction_pointer(regs) = fixup->fixup;
 		arch_fixup(regs);
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 4b5830bcbe2..16399bd2499 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -40,10 +40,6 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config TIME_LOW_RES
 	bool
 	default y
diff --git a/arch/frv/Makefile b/arch/frv/Makefile
index 310c47a663f..7ff84575b18 100644
--- a/arch/frv/Makefile
+++ b/arch/frv/Makefile
@@ -23,20 +23,14 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
-CCSPECS	:= $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
-CCDIR	:= $(strip $(patsubst %/specs,%,$(CCSPECS)))
-CPUCLASS := fr400
-
-# test for cross compiling
-COMPILE_ARCH = $(shell uname -m)
-
 ifdef CONFIG_MMU
 UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
 else
 UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
 endif
 
-ARCHMODFLAGS	+= -G0 -mlong-calls
+KBUILD_AFLAGS_MODULE += -G0 -mlong-calls
+KBUILD_CFLAGS_MODULE += -G0 -mlong-calls
 
 ifdef CONFIG_GPREL_DATA_8
 KBUILD_CFLAGS	+= -G8
@@ -54,7 +48,6 @@ endif
 
 ifdef CONFIG_GC_SECTIONS
 KBUILD_CFLAGS	+= -ffunction-sections -fdata-sections
-LINKFLAGS	+= --gc-sections
 endif
 
 ifndef CONFIG_FRAME_POINTER
@@ -64,16 +57,13 @@ endif
 ifdef CONFIG_CPU_FR451_COMPILE
 KBUILD_CFLAGS	+= -mcpu=fr450
 KBUILD_AFLAGS	+= -mcpu=fr450
-ASFLAGS		+= -mcpu=fr450
 else
 ifdef CONFIG_CPU_FR551_COMPILE
 KBUILD_CFLAGS	+= -mcpu=fr550
 KBUILD_AFLAGS	+= -mcpu=fr550
-ASFLAGS		+= -mcpu=fr550
 else
 KBUILD_CFLAGS	+= -mcpu=fr400
 KBUILD_AFLAGS	+= -mcpu=fr400
-ASFLAGS		+= -mcpu=fr400
 endif
 endif
 
@@ -83,14 +73,12 @@ endif
 KBUILD_CFLAGS	+= -mno-fdpic -mgpr-32 -msoft-float -mno-media
 KBUILD_CFLAGS	+= -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2
 KBUILD_AFLAGS	+= -mno-fdpic
-ASFLAGS		+= -mno-fdpic
 
 # make sure the .S files get compiled with debug info
 # and disable optimisations that are unhelpful whilst debugging
 ifdef CONFIG_DEBUG_INFO
 #KBUILD_CFLAGS	+= -O1
 KBUILD_AFLAGS	+= -Wa,--gdwarf2
-ASFLAGS		+= -Wa,--gdwarf2
 endif
 
 head-y		:= arch/frv/kernel/head.o arch/frv/kernel/init_task.o
@@ -105,11 +93,5 @@ all: Image
 Image: vmlinux
 	$(Q)$(MAKE) $(build)=arch/frv/boot $@
 
-bootstrap:
-	$(Q)$(MAKEBOOT) bootstrap
-
 archclean:
 	$(Q)$(MAKE) $(clean)=arch/frv/boot
-
-archdep: scripts/mkdep symlinks
-	$(Q)$(MAKE) $(build)=arch/frv/boot dep
diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h
index 68e4677fb9e..cb4c317eaec 100644
--- a/arch/frv/include/asm/highmem.h
+++ b/arch/frv/include/asm/highmem.h
@@ -152,7 +152,7 @@ do {									\
 	asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory");	\
 } while(0)
 
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+static inline void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 	switch (type) {
         case 0:		__kunmap_atomic_primary(0, 2);	break;
diff --git a/arch/frv/include/asm/local64.h b/arch/frv/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/frv/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/frv/kernel/local64.h b/arch/frv/kernel/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/frv/kernel/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 53cc669e6d5..988b6ff34cc 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -62,10 +62,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_BUG
         bool
         depends on BUG
diff --git a/arch/h8300/include/asm/local64.h b/arch/h8300/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/h8300/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/h8300/include/asm/md.h b/arch/h8300/include/asm/md.h
deleted file mode 100644
index 1b7300e0a17..00000000000
--- a/arch/h8300/include/asm/md.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * md.h: High speed xor_block operation for RAID4/5 
- *
- */
- 
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
-
-#endif /* __ASM_MD_H */
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 95610820041..ba22849ee3e 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -82,10 +82,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_TIME_VSYSCALL
 	bool
 	default y
@@ -503,8 +499,7 @@ config USE_PERCPU_NUMA_NODE_ID
 	depends on NUMA
 
 config HAVE_MEMORYLESS_NODES
-	def_bool y
-	depends on NUMA
+	def_bool NUMA
 
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index 8ae0d2604ce..be7bfa12b70 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -22,13 +22,13 @@ CHECKFLAGS	+= -m64 -D__ia64=1 -D__ia64__=1 -D_LP64 -D__LP64__
 
 OBJCOPYFLAGS	:= --strip-all
 LDFLAGS_vmlinux	:= -static
-LDFLAGS_MODULE	+= -T $(srctree)/arch/ia64/module.lds
-AFLAGS_KERNEL	:= -mconstant-gp
+KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/ia64/module.lds
+KBUILD_AFLAGS_KERNEL := -mconstant-gp
 EXTRA		:=
 
 cflags-y	:= -pipe $(EXTRA) -ffixed-r13 -mfixed-range=f12-f15,f32-f127 \
 		   -falign-functions=32 -frename-registers -fno-optimize-sibling-calls
-CFLAGS_KERNEL	:= -mconstant-gp
+KBUILD_CFLAGS_KERNEL := -mconstant-gp
 
 GAS_STATUS	= $(shell $(srctree)/arch/ia64/scripts/check-gas "$(CC)" "$(OBJDUMP)")
 KBUILD_CPPFLAGS += $(shell $(srctree)/arch/ia64/scripts/toolchain-flags "$(CC)" "$(OBJDUMP)" "$(READELF)")
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 312b12094a1..c5fe20553da 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,1358 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 16:10:42 2006
-#
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLUB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
-# CONFIG_IA64_GENERIC is not set
-CONFIG_IA64_DIG=y
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_HP_SIM is not set
-CONFIG_ITANIUM=y
-# CONFIG_MCKINLEY is not set
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_BRL_EMU=y
-CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-# CONFIG_VIRTUAL_MEM_MAP is not set
-# CONFIG_IA64_MCA_RECOVERY is not set
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
+CONFIG_BINFMT_MISC=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DM=m
 CONFIG_BLK_DEV_GENERIC=m
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
+CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
+CONFIG_CIFS=m
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
 CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
 CONFIG_DRM_R128=m
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-CONFIG_SND_CS4281=m
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS)
-#
-
-#
-# File systems
-#
+CONFIG_DUMMY=y
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_HUGETLBFS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C=y
+CONFIG_IA64_DIG=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IDE=m
+CONFIG_INET=y
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_INPUT_EVDEV=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID1=m
+CONFIG_MD=y
+CONFIG_MII=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NET=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-
-#
-# Instrumentation Support
-#
-CONFIG_PROFILING=y
+CONFIG_NR_CPUS=2
 CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PREEMPT=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROFILING=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SMP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SOUND=m
+CONFIG_SYSVIPC=y
+CONFIG_TMPFS=y
+CONFIG_UDF_FS=m
+CONFIG_UNIX=y
+CONFIG_USB_ACM=m
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=m
+CONFIG_USB_MON=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_VFAT_FS=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_QUOTA=y
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 6a4cc506fb5..01ba5305e98 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -1,1455 +1,133 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Mon Dec  8 08:12:07 2008
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_PROC_PID_CPUSET=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_IA64_GENERIC=y
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_DIG_VTD is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_SGI_UV is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_IA64_XEN_GUEST is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_IA64_CYCLONE=y
-CONFIG_IOSAPIC=y
-CONFIG_FORCE_MAX_ZONEORDER=17
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4096
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_PERMIT_BSP_REMOVE is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_IA64_MC_ERR_INJECT is not set
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=m
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management and ACPI options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_FAN=m
+CONFIG_ACPI_CONTAINER=m
 CONFIG_ACPI_DOCK=y
+CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_NUMA=y
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
-CONFIG_ACPI_CONTAINER=m
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SGI is not set
-# CONFIG_PCCARD is not set
-CONFIG_DMAR=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_ACPI_PROCFS=y
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_I460=m
+CONFIG_AGP=m
+CONFIG_AGP_SGI_TIOCA=m
 CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG_MESSAGES is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_ATA_PIIX=y
+CONFIG_ATA=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_AUTOFS_FS=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_SGI_XP=m
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DM=m
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SGIIOC4=y
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CGROUPS=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-CONFIG_ATA_PIIX=y
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_CHR_DEV_ST=m
+CONFIG_CIFS=m
+CONFIG_CONNECTOR=y
+CONFIG_CPUSETS=y
+CONFIG_CRASH_DUMP=y
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-CONFIG_IGB=y
-# CONFIG_IGB_LRO is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_FM801 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-# CONFIG_SERIAL_SGI_IOC3 is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_ZERO=m
 CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
+CONFIG_DRM_MGA=m
 CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-CONFIG_SND_EMU10K1=m
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-CONFIG_SND_FM801=m
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
-CONFIG_HID_EZKEY=m
+CONFIG_DRM_TDFX=m
+CONFIG_DUMMY=m
+CONFIG_E1000=y
+CONFIG_E100=m
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION=y
+CONFIG_GAMEPORT=m
 CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HPET=y
+CONFIG_HUGETLBFS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_IA64_CYCLONE=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IDE=y
+CONFIG_IGB=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
+CONFIG_INET=y
+CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-# CONFIG_INFINIBAND_NES is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
-
-#
-# HP Simulator drivers
-#
-# CONFIG_HP_SIMETH is not set
-# CONFIG_HP_SIMSERIAL is not set
-# CONFIG_HP_SIMSCSI is not set
-CONFIG_MSPEC=m
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCKINLEY=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MSPEC=m
+CONFIG_NETCONSOLE=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NET_TULIP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1465,15 +143,14 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1481,194 +158,79 @@ CONFIG_NLS_ISO8859_4=m
 CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_NTFS_FS=m
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+# CONFIG_PNP_DEBUG_MESSAGES is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PROC_KCORE=y
+CONFIG_RAW_DRIVER=m
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS=y
+CONFIG_SATA_VITESSE=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SGI_IOC4=y
+CONFIG_SGI_MBCS=m
+CONFIG_SGI_PARTITION=y
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_XP=m
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_FM801=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_VIRMIDI=m
+CONFIG_SOUND=m
+CONFIG_SYN_COOKIES=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYSVIPC=y
+CONFIG_TIGON3=y
+CONFIG_TMPFS=y
+CONFIG_TULIP=m
+CONFIG_UDF_FS=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_UNIX=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB=m
+CONFIG_USB_MON=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_VFAT_FS=y
+CONFIG_XFS_FS=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 2dc185b0f9a..18989a08414 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -1,1267 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Thu Mar  2 16:39:10 2006
-#
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLUB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
-CONFIG_IA64_GENERIC=y
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_IA64_CYCLONE=y
-CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=512
-CONFIG_IA64_NR_NODES=256
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_SGI_SN=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
 CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_CONTAINER=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_ACPI_CONTAINER=m
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SGI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_I460=m
+CONFIG_AGP=m
+CONFIG_AGP_SGI_TIOCA=m
 CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DM=m
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SGIIOC4=y
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_MV is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIL24 is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-CONFIG_SCSI_SATA_VITESSE=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CIFS=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=m
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_FM801 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_ACPI=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
-CONFIG_AGP_HP_ZX1=m
-CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_ZERO=m
 CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
+CONFIG_DRM_MGA=m
 CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
-CONFIG_HPET_MMAP=y
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_MTPAV=m
-CONFIG_SND_SERIAL_U16550=m
-CONFIG_SND_MPU401=m
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-CONFIG_SND_CS4281=m
-CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_EMU10K1=m
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
-# CONFIG_INFINIBAND_SRP is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC4=y
-CONFIG_SGI_IOC3=y
-
-#
-# EDAC - error detection and reporting (RAS)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
+CONFIG_DRM_TDFX=m
+CONFIG_DUMMY=m
+CONFIG_E1000=y
+CONFIG_E100=m
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION=y
+CONFIG_GAMEPORT=m
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HPET=y
+CONFIG_HUGETLBFS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_IA64_CYCLONE=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
+CONFIG_INET=y
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_KALLSYMS_ALL=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCKINLEY=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_NETCONSOLE=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NET_TULIP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1277,15 +120,14 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1293,100 +135,77 @@ CONFIG_NLS_ISO8859_4=m
 CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-
-#
-# HP Simulator drivers
-#
-# CONFIG_HP_SIMETH is not set
-# CONFIG_HP_SIMSERIAL is not set
-# CONFIG_HP_SIMSCSI is not set
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_NR_CPUS=512
+CONFIG_NTFS_FS=m
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PROC_KCORE=y
+CONFIG_RAW_DRIVER=m
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_SGI_IOC3=y
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SGI_IOC3=y
+CONFIG_SGI_IOC4=y
+CONFIG_SGI_MBCS=m
+CONFIG_SGI_PARTITION=y
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_FM801=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_VIRMIDI=m
+CONFIG_SOUND=m
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSVIPC=y
+CONFIG_TIGON3=y
+CONFIG_TMPFS=y
+CONFIG_TULIP=m
+CONFIG_UDF_FS=m
+CONFIG_UNIX=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB=m
+CONFIG_USB_MON=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_UHCI_HCD=m
+CONFIG_VFAT_FS=y
+CONFIG_XFS_FS=y
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index 21a23cdfd41..585222b368c 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -1,723 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 16:13:41 2006
-#
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLUB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_DMA_IS_DMA32=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXT2_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT3_FS=y
+CONFIG_HP_SIMETH=y
+CONFIG_HP_SIMSCSI=y
+CONFIG_HP_SIMSERIAL_CONSOLE=y
+CONFIG_HP_SIMSERIAL=y
+CONFIG_HUGETLBFS=y
 CONFIG_IA64_HP_SIM=y
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
 CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=64
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-# CONFIG_VIRTUAL_MEM_MAP is not set
-# CONFIG_IA64_MCA_RECOVERY is not set
-# CONFIG_PERFMON is not set
 CONFIG_IA64_PALINFO=m
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-
-#
-# Power management and ACPI
-#
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
 CONFIG_INET=y
+CONFIG_INOTIFY=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_MCKINLEY=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_NET=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD=y
+CONFIG_NFS_FS=y
+CONFIG_NR_CPUS=64
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PREEMPT=y
+CONFIG_PROC_KCORE=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
+CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
+CONFIG_SCSI=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_SMP=y
+# CONFIG_STANDALONE is not set
+CONFIG_SYSVIPC=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS)
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-
-#
-# HP Simulator drivers
-#
-CONFIG_HP_SIMETH=y
-CONFIG_HP_SIMSERIAL=y
-CONFIG_HP_SIMSERIAL_CONSOLE=y
-CONFIG_HP_SIMSCSI=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index c5a5ea9d54a..498618ea00e 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,1134 +1,113 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 13:54:47 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=20
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-CONFIG_IA64_DIG=y
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_IA64_CYCLONE=y
-CONFIG_IOSAPIC=y
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_PERMIT_BSP_REMOVE=y
-CONFIG_FORCE_CPEI_RETARGET=y
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_IA64_MC_ERR_INJECT is not set
-# CONFIG_IA64_ESI is not set
-CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-
-# CONFIG_DMAR is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
-CONFIG_ACPI_PROCFS=y
 CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_CONTAINER=m
 CONFIG_ACPI_FAN=m
-# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_ACPI_CONTAINER=m
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_ACPI_PROCFS=y
+CONFIG_AGP_I460=m
+CONFIG_AGP=m
 CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DM=m
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_CHR_DEV_ST=m
+CONFIG_CIFS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_FM801 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_AGP=m
-CONFIG_AGP_I460=m
 CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
+CONFIG_DRM_MGA=m
 CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
-CONFIG_HPET_MMAP=y
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-# CONFIG_MSPEC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
+CONFIG_DRM_TDFX=m
+CONFIG_DUMMY=m
+CONFIG_E1000=y
+CONFIG_E100=m
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION=y
+CONFIG_GAMEPORT=m
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HPET=y
+CONFIG_HUGETLBFS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_IA64_CYCLONE=y
+CONFIG_IA64_DIG=y
+CONFIG_IA64_GRANULE_16MB=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IDE=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
+CONFIG_INET=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCKINLEY=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_NETCONSOLE=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NET_TULIP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1144,15 +123,14 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1160,120 +138,50 @@ CONFIG_NLS_ISO8859_4=m
 CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
+CONFIG_NR_CPUS=16
+CONFIG_NTFS_FS=m
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PROC_KCORE=y
+CONFIG_RAW_DRIVER=m
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SGI_PARTITION=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMP=y
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSVIPC=y
+CONFIG_TIGON3=y
+CONFIG_TMPFS=y
+CONFIG_TULIP=m
+CONFIG_UDF_FS=m
+CONFIG_UNIX=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB=y
+CONFIG_VFAT_FS=y
+CONFIG_XFS_FS=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index c67eafc4bb3..5f6d284723a 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -1,1374 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc1
-# Fri Jan 16 11:49:59 2009
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-# CONFIG_GROUP_SCHED is not set
-
-#
-# Control Group support
-#
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_ZONE_DMA=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_SWIOTLB=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_PARAVIRT_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_XEN=y
-CONFIG_XEN_XENCOMM=y
-CONFIG_NO_IDLE_HZ=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_DIG_VTD is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_SGI_UV is not set
-# CONFIG_IA64_HP_SIM is not set
-CONFIG_IA64_XEN_GUEST=y
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_IA64_CYCLONE=y
-CONFIG_IOSAPIC=y
-CONFIG_FORCE_MAX_ZONEORDER=17
-# CONFIG_VIRT_CPU_ACCOUNTING is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_SCHED_SMT is not set
-CONFIG_PERMIT_BSP_REMOVE=y
-CONFIG_FORCE_CPEI_RETARGET=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_IA64_MC_ERR_INJECT is not set
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-
-#
-# Firmware Drivers
-#
-# CONFIG_FIRMWARE_MEMMAP is not set
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-
-#
-# Power management and ACPI options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_ACPI=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_PROCFS_POWER=y
-CONFIG_ACPI_SYSFS_POWER=y
-CONFIG_ACPI_PROC_EVENT=y
 CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_CONTAINER=m
 CONFIG_ACPI_FAN=m
-# CONFIG_ACPI_DOCK is not set
 CONFIG_ACPI_PROCESSOR=m
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=m
-# CONFIG_ACPI_CUSTOM_DSDT is not set
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
-CONFIG_ACPI_CONTAINER=m
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_ACPI=m
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_PCCARD is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
+CONFIG_ACPI_PROCFS=y
+CONFIG_AGP=m
 CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLK_DEV_CMD64X=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_XEN_BLKDEV_FRONTEND=y
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_DM=m
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
+CONFIG_CHR_DEV_ST=m
+CONFIG_CIFS=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
 CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
+CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=y
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_E100=m
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_FM801 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=6
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=m
 CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
+CONFIG_DRM_MGA=m
 CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
+CONFIG_DRM_TDFX=m
+CONFIG_DUMMY=m
+CONFIG_E1000=y
+CONFIG_E100=m
+CONFIG_EFI_PARTITION=y
+CONFIG_EFI_RTC=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION=y
+CONFIG_GAMEPORT=m
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_XENFS=y
-CONFIG_XEN_COMPAT_XENFS=y
-# CONFIG_STAGING is not set
-# CONFIG_MSPEC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=m
+CONFIG_HOTPLUG_PCI=m
+CONFIG_HPET=y
+CONFIG_HUGETLBFS=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_IA64_CYCLONE=y
+CONFIG_IA64_GRANULE_16MB=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IA64_XEN_GUEST=y
+CONFIG_IDE=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_IKCONFIG=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KEXEC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCKINLEY=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_NETCONSOLE=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NET_TULIP=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V4=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1384,15 +131,14 @@ CONFIG_NLS_CODEPAGE_864=m
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_936=m
 CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1400,200 +146,54 @@ CONFIG_NLS_ISO8859_4=m
 CONFIG_NLS_ISO8859_5=m
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_NR_CPUS=16
+CONFIG_NTFS_FS=m
+CONFIG_PACKET=y
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_PROC_KCORE=y
+CONFIG_RAW_DRIVER=m
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-# CONFIG_IOMMU_API is not set
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SGI_PARTITION=y
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMP=y
+CONFIG_SYN_COOKIES=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYSVIPC=y
+CONFIG_TIGON3=y
+CONFIG_TMPFS=y
+CONFIG_TULIP=m
+CONFIG_UDF_FS=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_UNIX=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB=y
+CONFIG_VFAT_FS=y
+CONFIG_XFS_FS=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 3cec65b534c..de0b68e0d48 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,1460 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar  8 11:04:20 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLUB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_ZONE_DMA=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-CONFIG_IA64_HP_ZX1=y
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-# CONFIG_IA64_SGI_SN2 is not set
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-CONFIG_IA64_PAGE_SIZE_16KB=y
-# CONFIG_IA64_PAGE_SIZE_64KB is not set
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=16
-CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_PERMIT_BSP_REMOVE is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_KEXEC is not set
-CONFIG_CRASH_DUMP=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# ACPI (Advanced Configuration and Power Interface) Support
-#
-CONFIG_ACPI=y
 CONFIG_ACPI_PROCFS=y
-CONFIG_ACPI_BUTTON=y
-CONFIG_ACPI_FAN=y
-# CONFIG_ACPI_DOCK is not set
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-CONFIG_ACPI_CONTAINER=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCI Hotplug Support
-#
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_AGP_HP_ZX1=y
+CONFIG_AGP=y
+CONFIG_AUTOFS_FS=y
+CONFIG_BINFMT_MISC=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
-CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CHR_DEV_OSST=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-# CONFIG_FUSION_SAS is not set
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CRASH_DUMP=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DRM_RADEON=y
+CONFIG_DRM=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-CONFIG_TULIP_MWI=y
-CONFIG_TULIP_MMIO=y
-CONFIG_TULIP_NAPI=y
-CONFIG_TULIP_NAPI_HW_MITIGATION=y
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=y
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_E100=y
+CONFIG_EFI_PARTITION=y
 CONFIG_EFI_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_HP_ZX1=y
-CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-CONFIG_DRM_RADEON=y
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-
-#
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
-#
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-
-#
-# V4L USB devices
-#
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_USB_DSBR is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frambuffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-CONFIG_FB_RADEON_DEBUG=y
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=y
-CONFIG_SND_OPL3_LIB=y
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-CONFIG_SND_FM801=y
-# CONFIG_SND_FM801_TEA575X_BOOL is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-# CONFIG_MSPEC is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
+CONFIG_EFI_VARS=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
+CONFIG_FB_RADEON_DEBUG=y
+CONFIG_FB_RADEON=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HUGETLBFS=y
+# CONFIG_HWMON is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_IA64_HP_ZX1=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_IA64_PALINFO=y
+CONFIG_IA64_PRINT_HAZARDS=y
+CONFIG_IDE=y
+CONFIG_INET=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_JOYDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_IP_MULTICAST=y
+# CONFIG_IPV6 is not set
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_KPROBES=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MCKINLEY=y
+CONFIG_MODULES=y
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NETFILTER=y
+CONFIG_NET_PCI=y
+CONFIG_NET_TULIP=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_1251=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1470,15 +95,14 @@ CONFIG_NLS_CODEPAGE_864=y
 CONFIG_NLS_CODEPAGE_865=y
 CONFIG_NLS_CODEPAGE_866=y
 CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_874=y
 CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_936=y
 CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-# CONFIG_NLS_CODEPAGE_1250 is not set
-CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_ISO8859_3=y
@@ -1486,125 +110,52 @@ CONFIG_NLS_ISO8859_4=y
 CONFIG_NLS_ISO8859_5=y
 CONFIG_NLS_ISO8859_6=y
 CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_8=y
 CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-CONFIG_KPROBES=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-CONFIG_IA64_PRINT_HAZARDS=y
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_NR_CPUS=16
+CONFIG_PACKET=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_PERFMON=y
+CONFIG_PROC_KCORE=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SMP=y
+CONFIG_SND_FM801=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND=y
+CONFIG_SOUND=y
+CONFIG_SYSVIPC=y
+CONFIG_TIGON3=y
+CONFIG_TMPFS=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP=y
+CONFIG_UDF_FS=y
+CONFIG_UNIX=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB=y
+CONFIG_VFAT_FS=y
diff --git a/arch/ia64/include/asm/local64.h b/arch/ia64/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/ia64/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h
index 5f271bc712e..41b6d31110f 100644
--- a/arch/ia64/include/asm/page.h
+++ b/arch/ia64/include/asm/page.h
@@ -41,7 +41,7 @@
 #define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE - 1))
 
-#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SHIFT	18	/* log2() of max. size of per-CPU area */
 #define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
 
 
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 6c892285604..4a746ea838f 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -25,7 +25,7 @@ static int ia64_set_msi_irq_affinity(unsigned int irq,
 	if (irq_prepare_move(irq, cpu))
 		return -1;
 
-	read_msi_msg(irq, &msg);
+	get_cached_msi_msg(irq, &msg);
 
 	addr = msg.address_lo;
 	addr &= MSI_ADDR_DEST_ID_MASK;
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index ab985f785c1..744329072f3 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1696,8 +1696,8 @@ pfm_poll(struct file *filp, poll_table * wait)
 	return mask;
 }
 
-static int
-pfm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long
+pfm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	DPRINT(("pfm_ioctl called\n"));
 	return -EINVAL;
@@ -2174,15 +2174,15 @@ pfm_no_open(struct inode *irrelevant, struct file *dontcare)
 
 
 static const struct file_operations pfm_file_ops = {
-	.llseek   = no_llseek,
-	.read     = pfm_read,
-	.write    = pfm_write,
-	.poll     = pfm_poll,
-	.ioctl    = pfm_ioctl,
-	.open     = pfm_no_open,	/* special open code to disallow open via /proc */
-	.fasync   = pfm_fasync,
-	.release  = pfm_close,
-	.flush	  = pfm_flush
+	.llseek		= no_llseek,
+	.read		= pfm_read,
+	.write		= pfm_write,
+	.poll		= pfm_poll,
+	.unlocked_ioctl = pfm_ioctl,
+	.open		= pfm_no_open,	/* special open code to disallow open via /proc */
+	.fasync		= pfm_fasync,
+	.release	= pfm_close,
+	.flush		= pfm_flush
 };
 
 static int
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 6a1380e90f8..d003b502a43 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -390,13 +390,11 @@ smp_callin (void)
 
 	fix_b0_for_bsp();
 
-#ifdef CONFIG_NUMA
 	/*
 	 * numa_node_id() works after this.
 	 */
 	set_numa_node(cpu_to_node_map[cpuid]);
 	set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
-#endif
 
 	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
@@ -510,21 +508,18 @@ do_boot_cpu (int sapicid, int cpu)
 		.done	= COMPLETION_INITIALIZER(c_idle.done),
 	};
 
+	/*
+	 * We can't use kernel_thread since we must avoid to
+	 * reschedule the child.
+	 */
  	c_idle.idle = get_idle_for_cpu(cpu);
  	if (c_idle.idle) {
 		init_idle(c_idle.idle, cpu);
  		goto do_rest;
 	}
 
-	/*
-	 * We can't use kernel_thread since we must avoid to reschedule the child.
-	 */
-	if (!keventd_up() || current_is_keventd())
-		c_idle.work.func(&c_idle.work);
-	else {
-		schedule_work(&c_idle.work);
-		wait_for_completion(&c_idle.done);
-	}
+	schedule_work(&c_idle.work);
+	wait_for_completion(&c_idle.done);
 
 	if (IS_ERR(c_idle.idle))
 		panic("failed fork for CPU %d", cpu);
@@ -640,9 +635,7 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
-#ifdef CONFIG_NUMA
 	set_numa_node(cpu_to_node_map[smp_processor_id()]);
-#endif
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 	paravirt_post_smp_prepare_boot_cpu();
 }
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 653b3c46ea8..ed6f22eb5b1 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -471,7 +471,8 @@ void update_vsyscall_tz(void)
 {
 }
 
-void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult)
+void update_vsyscall(struct timespec *wall, struct timespec *wtm,
+			struct clocksource *c, u32 mult)
 {
         unsigned long flags;
 
@@ -487,9 +488,9 @@ void update_vsyscall(struct timespec *wall, struct clocksource *c, u32 mult)
 	/* copy kernel time structures */
         fsyscall_gtod_data.wall_time.tv_sec = wall->tv_sec;
         fsyscall_gtod_data.wall_time.tv_nsec = wall->tv_nsec;
-        fsyscall_gtod_data.monotonic_time.tv_sec = wall_to_monotonic.tv_sec
+	fsyscall_gtod_data.monotonic_time.tv_sec = wtm->tv_sec
 							+ wall->tv_sec;
-        fsyscall_gtod_data.monotonic_time.tv_nsec = wall_to_monotonic.tv_nsec
+	fsyscall_gtod_data.monotonic_time.tv_nsec = wtm->tv_nsec
 							+ wall->tv_nsec;
 
 	/* normalize */
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index e07218a2577..5a4d044dcb1 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -6,204 +6,209 @@
 
 #include <asm-generic/vmlinux.lds.h>
 
-#define IVT_TEXT							\
-		VMLINUX_SYMBOL(__start_ivt_text) = .;			\
-		*(.text..ivt)						\
-		VMLINUX_SYMBOL(__end_ivt_text) = .;
-
 OUTPUT_FORMAT("elf64-ia64-little")
 OUTPUT_ARCH(ia64)
 ENTRY(phys_start)
 jiffies = jiffies_64;
+
 PHDRS {
-  code   PT_LOAD;
-  percpu PT_LOAD;
-  data   PT_LOAD;
-  note   PT_NOTE;
-  unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */
+	code   PT_LOAD;
+	percpu PT_LOAD;
+	data   PT_LOAD;
+	note   PT_NOTE;
+	unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */
 }
-SECTIONS
-{
-  /* unwind exit sections must be discarded before the rest of the
-     sections get included. */
-  /DISCARD/ : {
-	*(.IA_64.unwind.exit.text)
-	*(.IA_64.unwind_info.exit.text)
-	*(.comment)
-	*(.note)
-  }
-
-  v = PAGE_OFFSET;	/* this symbol is here to make debugging easier... */
-  phys_start = _start - LOAD_OFFSET;
-
-  code : { } :code
-  . = KERNEL_START;
-
-  _text = .;
-  _stext = .;
-
-  .text : AT(ADDR(.text) - LOAD_OFFSET)
-    {
-	IVT_TEXT
-	TEXT_TEXT
-	SCHED_TEXT
-	LOCK_TEXT
-	KPROBES_TEXT
-	*(.gnu.linkonce.t*)
-    }
-  .text2 : AT(ADDR(.text2) - LOAD_OFFSET)
-	{ *(.text2) }
-#ifdef CONFIG_SMP
-  .text..lock : AT(ADDR(.text..lock) - LOAD_OFFSET)
-	{ *(.text..lock) }
-#endif
-  _etext = .;
 
-  /* Read-only data */
+SECTIONS {
+	/*
+	 * unwind exit sections must be discarded before
+	 * the rest of the sections get included.
+	 */
+	/DISCARD/ : {
+		*(.IA_64.unwind.exit.text)
+		*(.IA_64.unwind_info.exit.text)
+		*(.comment)
+		*(.note)
+	}
 
-  NOTES :code :note		/* put .notes in text and mark in PT_NOTE  */
-  code_continues : {} :code	/* switch back to regular program...  */
+	v = PAGE_OFFSET; /* this symbol is here to make debugging easier... */
+	phys_start = _start - LOAD_OFFSET;
+
+	code : {
+	} :code
+	. = KERNEL_START;
+
+	_text = .;
+	_stext = .;
+
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
+		__start_ivt_text = .;
+		*(.text..ivt)
+		__end_ivt_text = .;
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		*(.gnu.linkonce.t*)
+	}
 
-  EXCEPTION_TABLE(16)
+	.text2 : AT(ADDR(.text2) - LOAD_OFFSET)	{
+		*(.text2)
+	}
 
-  /* MCA table */
-  . = ALIGN(16);
-  __mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET)
-	{
-	  __start___mca_table = .;
-	  *(__mca_table)
-	  __stop___mca_table = .;
+#ifdef CONFIG_SMP
+	.text..lock : AT(ADDR(.text..lock) - LOAD_OFFSET) {
+		*(.text..lock)
+	}
+#endif
+	_etext = .;
+
+	/*
+	 * Read-only data
+	 */
+	NOTES :code :note       /* put .notes in text and mark in PT_NOTE  */
+	code_continues : {
+	} : code               /* switch back to regular program...  */
+
+	EXCEPTION_TABLE(16)
+
+	/* MCA table */
+	. = ALIGN(16);
+	__mca_table : AT(ADDR(__mca_table) - LOAD_OFFSET) {
+		__start___mca_table = .;
+		*(__mca_table)
+		__stop___mca_table = .;
 	}
 
-  .data..patch.phys_stack_reg : AT(ADDR(.data..patch.phys_stack_reg) - LOAD_OFFSET)
-	{
-	  __start___phys_stack_reg_patchlist = .;
-	  *(.data..patch.phys_stack_reg)
-	  __end___phys_stack_reg_patchlist = .;
+	.data..patch.phys_stack_reg : AT(ADDR(.data..patch.phys_stack_reg) - LOAD_OFFSET) {
+		__start___phys_stack_reg_patchlist = .;
+		*(.data..patch.phys_stack_reg)
+		__end___phys_stack_reg_patchlist = .;
 	}
 
-  /* Global data */
-  _data = .;
+	/*
+	 * Global data
+	 */
+	_data = .;
 
-  /* Unwind info & table: */
-  . = ALIGN(8);
-  .IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - LOAD_OFFSET)
-	{ *(.IA_64.unwind_info*) }
-  .IA_64.unwind : AT(ADDR(.IA_64.unwind) - LOAD_OFFSET)
-	{
-	  __start_unwind = .;
-	  *(.IA_64.unwind*)
-	  __end_unwind = .;
+	/* Unwind info & table: */
+	. = ALIGN(8);
+	.IA_64.unwind_info : AT(ADDR(.IA_64.unwind_info) - LOAD_OFFSET) {
+		*(.IA_64.unwind_info*)
+	}
+	.IA_64.unwind : AT(ADDR(.IA_64.unwind) - LOAD_OFFSET) {
+		__start_unwind = .;
+		*(.IA_64.unwind*)
+		__end_unwind = .;
 	} :code :unwind
-  code_continues2 : {} : code
+	code_continues2 : {
+	} : code
 
-  RODATA
+	RODATA
 
-  .opd : AT(ADDR(.opd) - LOAD_OFFSET)
-	{ *(.opd) }
-
-  /* Initialization code and data: */
+	.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
+		*(.opd)
+	}
 
-  . = ALIGN(PAGE_SIZE);
-  __init_begin = .;
+	/*
+	 * Initialization code and data:
+	 */
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
 
-  INIT_TEXT_SECTION(PAGE_SIZE)
-  INIT_DATA_SECTION(16)
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 
-  .data..patch.vtop : AT(ADDR(.data..patch.vtop) - LOAD_OFFSET)
-	{
-	  __start___vtop_patchlist = .;
-	  *(.data..patch.vtop)
-	  __end___vtop_patchlist = .;
+	.data..patch.vtop : AT(ADDR(.data..patch.vtop) - LOAD_OFFSET) {
+		__start___vtop_patchlist = .;
+		*(.data..patch.vtop)
+		__end___vtop_patchlist = .;
 	}
 
-  .data..patch.rse : AT(ADDR(.data..patch.rse) - LOAD_OFFSET)
-	{
-	  __start___rse_patchlist = .;
-	  *(.data..patch.rse)
-	  __end___rse_patchlist = .;
+	.data..patch.rse : AT(ADDR(.data..patch.rse) - LOAD_OFFSET) {
+		__start___rse_patchlist = .;
+		*(.data..patch.rse)
+		__end___rse_patchlist = .;
 	}
 
-  .data..patch.mckinley_e9 : AT(ADDR(.data..patch.mckinley_e9) - LOAD_OFFSET)
-	{
-	  __start___mckinley_e9_bundles = .;
-	  *(.data..patch.mckinley_e9)
-	  __end___mckinley_e9_bundles = .;
+	.data..patch.mckinley_e9 : AT(ADDR(.data..patch.mckinley_e9) - LOAD_OFFSET) {
+		__start___mckinley_e9_bundles = .;
+		*(.data..patch.mckinley_e9)
+		__end___mckinley_e9_bundles = .;
 	}
 
 #if defined(CONFIG_PARAVIRT)
-  . = ALIGN(16);
-  .paravirt_bundles : AT(ADDR(.paravirt_bundles) - LOAD_OFFSET)
-	{
-	  __start_paravirt_bundles = .;
-          *(.paravirt_bundles)
-	  __stop_paravirt_bundles = .;
-	}
-  . = ALIGN(16);
-  .paravirt_insts : AT(ADDR(.paravirt_insts) - LOAD_OFFSET)
-	{
-	  __start_paravirt_insts = .;
-          *(.paravirt_insts)
-	  __stop_paravirt_insts = .;
-	}
-  . = ALIGN(16);
-  .paravirt_branches : AT(ADDR(.paravirt_branches) - LOAD_OFFSET)
-	{
-	  __start_paravirt_branches = .;
-	  *(.paravirt_branches)
-	  __stop_paravirt_branches = .;
+	. = ALIGN(16);
+	.paravirt_bundles : AT(ADDR(.paravirt_bundles) - LOAD_OFFSET) {
+		__start_paravirt_bundles = .;
+		*(.paravirt_bundles)
+		__stop_paravirt_bundles = .;
+	}
+	. = ALIGN(16);
+	.paravirt_insts : AT(ADDR(.paravirt_insts) - LOAD_OFFSET) {
+		__start_paravirt_insts = .;
+		*(.paravirt_insts)
+		__stop_paravirt_insts = .;
+	}
+	. = ALIGN(16);
+	.paravirt_branches : AT(ADDR(.paravirt_branches) - LOAD_OFFSET) {
+		__start_paravirt_branches = .;
+		*(.paravirt_branches)
+		__stop_paravirt_branches = .;
 	}
 #endif
 
 #if defined(CONFIG_IA64_GENERIC)
-  /* Machine Vector */
-  . = ALIGN(16);
-  .machvec : AT(ADDR(.machvec) - LOAD_OFFSET)
-	{
-	  machvec_start = .;
-	  *(.machvec)
-	  machvec_end = .;
+	/* Machine Vector */
+	. = ALIGN(16);
+	.machvec : AT(ADDR(.machvec) - LOAD_OFFSET) {
+		machvec_start = .;
+		*(.machvec)
+		machvec_end = .;
 	}
 #endif
 
 #ifdef	CONFIG_SMP
-  . = ALIGN(PERCPU_PAGE_SIZE);
-  __cpu0_per_cpu = .;
-  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+	. = ALIGN(PERCPU_PAGE_SIZE);
+	__cpu0_per_cpu = .;
+	. = . + PERCPU_PAGE_SIZE;   /* cpu0 per-cpu space */
 #endif
 
-  . = ALIGN(PAGE_SIZE);
-  __init_end = .;
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
 
-  .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET)
-        {
-	PAGE_ALIGNED_DATA(PAGE_SIZE)
-	  . = ALIGN(PAGE_SIZE);
-	  __start_gate_section = .;
-	  *(.data..gate)
-	  __stop_gate_section = .;
+	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
+		. = ALIGN(PAGE_SIZE);
+		__start_gate_section = .;
+		*(.data..gate)
+		__stop_gate_section = .;
 #ifdef CONFIG_XEN
-	  . = ALIGN(PAGE_SIZE);
-	  __xen_start_gate_section = .;
-	  *(.data..gate.xen)
-	  __xen_stop_gate_section = .;
+		. = ALIGN(PAGE_SIZE);
+		__xen_start_gate_section = .;
+		*(.data..gate.xen)
+		__xen_stop_gate_section = .;
 #endif
 	}
-  . = ALIGN(PAGE_SIZE);		/* make sure the gate page doesn't expose
-  				 * kernel data
-				 */
-
-  /* Per-cpu data: */
-  . = ALIGN(PERCPU_PAGE_SIZE);
-  PERCPU_VADDR(PERCPU_ADDR, :percpu)
-  __phys_per_cpu_start = __per_cpu_load;
-  . = __phys_per_cpu_start + PERCPU_PAGE_SIZE;	/* ensure percpu data fits
-  						 * into percpu page size
-						 */
-
-  data : { } :data
-  .data : AT(ADDR(.data) - LOAD_OFFSET)
-	{
+	/*
+	 * make sure the gate page doesn't expose
+	 * kernel data
+	 */
+	. = ALIGN(PAGE_SIZE);
+
+	/* Per-cpu data: */
+	. = ALIGN(PERCPU_PAGE_SIZE);
+	PERCPU_VADDR(PERCPU_ADDR, :percpu)
+	__phys_per_cpu_start = __per_cpu_load;
+	/*
+	 * ensure percpu data fits
+	 * into percpu page size
+	 */
+	. = __phys_per_cpu_start + PERCPU_PAGE_SIZE;
+
+	data : {
+	} :data
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {
 		INIT_TASK_DATA(PAGE_SIZE)
 		CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES)
 		READ_MOSTLY_DATA(SMP_CACHE_BYTES)
@@ -213,26 +218,37 @@ SECTIONS
 		CONSTRUCTORS
 	}
 
-  . = ALIGN(16);	/* gp must be 16-byte aligned for exc. table */
-  .got : AT(ADDR(.got) - LOAD_OFFSET)
-	{ *(.got.plt) *(.got) }
-  __gp = ADDR(.got) + 0x200000;
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata : AT(ADDR(.sdata) - LOAD_OFFSET)
-	{ *(.sdata) *(.sdata1) *(.srdata) }
-  _edata  =  .;
+	. = ALIGN(16);	/* gp must be 16-byte aligned for exc. table */
+	.got : AT(ADDR(.got) - LOAD_OFFSET) {
+		*(.got.plt)
+		*(.got)
+	}
+	__gp = ADDR(.got) + 0x200000;
+
+	/*
+	 * We want the small data sections together,
+	 * so single-instruction offsets can access
+	 * them all, and initialized data all before
+	 * uninitialized, so we can shorten the
+	 * on-disk segment size.
+	 */
+	.sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
+		*(.sdata)
+		*(.sdata1)
+		*(.srdata)
+	}
+	_edata  =  .;
 
-  BSS_SECTION(0, 0, 0)
+	BSS_SECTION(0, 0, 0)
 
-  _end = .;
+	_end = .;
 
-  code : { } :code
+	code : {
+	} :code
 
-  STABS_DEBUG
-  DWARF_DEBUG
+	STABS_DEBUG
+	DWARF_DEBUG
 
-  /* Default discards */
-  DISCARDS
+	/* Default discards */
+	DISCARDS
 }
diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c
index ebfdd6a9ae1..0c72dd46383 100644
--- a/arch/ia64/sn/kernel/msi_sn.c
+++ b/arch/ia64/sn/kernel/msi_sn.c
@@ -175,7 +175,7 @@ static int sn_set_msi_irq_affinity(unsigned int irq,
 	 * Release XIO resources for the old MSI PCI address
 	 */
 
-	read_msi_msg(irq, &msg);
+	get_cached_msi_msg(irq, &msg);
         sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	pdev = sn_pdev->pdi_linux_pcidev;
 	provider = SN_PCIDEV_BUSPROVIDER(pdev);
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 3a9319f93e8..836abbbc9c0 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -44,9 +44,6 @@ config HZ
 	int
 	default 100
 
-config GENERIC_TIME
-	def_bool y
-
 config ARCH_USES_GETTIMEOFFSET
 	def_bool y
 
diff --git a/arch/m32r/Makefile b/arch/m32r/Makefile
index 469766b24e2..8ff5ba0ea26 100644
--- a/arch/m32r/Makefile
+++ b/arch/m32r/Makefile
@@ -12,8 +12,8 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux	:=
 
 KBUILD_CFLAGS += -pipe -fno-schedule-insns
-CFLAGS_KERNEL += -mmodel=medium
-CFLAGS_MODULE += -mmodel=large
+KBUILD_CFLAGS_KERNEL += -mmodel=medium
+KBUILD_CFLAGS_MODULE += -mmodel=large
 
 ifdef CONFIG_CHIP_VDEC2
 cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
diff --git a/arch/m32r/include/asm/local64.h b/arch/m32r/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/m32r/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 2e3737b92ff..8030e2481d9 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -59,9 +59,6 @@ config HZ
 	int
 	default 100
 
-config GENERIC_TIME
-	def_bool y
-
 config ARCH_USES_GETTIMEOFFSET
 	def_bool y
 
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 570d85c3f97..b06a7e3cbcd 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -18,7 +18,7 @@ KBUILD_DEFCONFIG := multi_defconfig
 # override top level makefile
 AS += -m68020
 LDFLAGS := -m m68kelf
-LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
+KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
 ifneq ($(SUBARCH),$(ARCH))
 	ifeq ($(CROSS_COMPILE),)
 		CROSS_COMPILE := $(call cc-cross-prefix, \
diff --git a/arch/m68k/include/asm/local64.h b/arch/m68k/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/m68k/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/m68k/include/asm/md.h b/arch/m68k/include/asm/md.h
deleted file mode 100644
index d2f78f226f3..00000000000
--- a/arch/m68k/include/asm/md.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * md.h: High speed xor_block operation for RAID4/5
- *
- */
-
-#ifndef __ASM_MD_H
-#define __ASM_MD_H
-
-/* #define HAVE_ARCH_XORBLOCK */
-
-#define MD_XORBLOCK_ALIGNMENT	sizeof(long)
-
-#endif /* __ASM_MD_H */
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index efeb6033fc1..2609c394e1d 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -63,10 +63,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_CMOS_UPDATE
 	bool
 	default y
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 505a0859242..692fdfce2a2 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -14,9 +14,12 @@ config MICROBLAZE
 	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select TRACING_SUPPORT
+	select OF
+	select OF_FLATTREE
 
 config SWAP
 	def_bool n
@@ -48,9 +51,6 @@ config GENERIC_IRQ_PROBE
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_TIME_VSYSCALL
 	def_bool n
 
@@ -75,9 +75,6 @@ config LOCKDEP_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config DTC
-	def_bool y
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -124,18 +121,6 @@ config CMDLINE_FORCE
 	  Set this to have arguments from the default kernel command string
 	  override those passed by the boot loader.
 
-config OF
-	def_bool y
-	select OF_FLATTREE
-
-config PROC_DEVICETREE
-	bool "Support for device tree in /proc"
-	depends on PROC_FS
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware or other boot firmware. If unsure, say Y here.
-
 endmenu
 
 menu "Advanced setup"
@@ -223,6 +208,36 @@ config TASK_SIZE
 	hex "Size of user task space" if TASK_SIZE_BOOL
 	default "0x80000000"
 
+choice
+	prompt "Page size"
+	default MICROBLAZE_4K_PAGES
+	depends on ADVANCED_OPTIONS && !MMU
+	help
+	  Select the kernel logical page size. Increasing the page size
+	  will reduce software overhead at each page boundary, allow
+	  hardware prefetch mechanisms to be more effective, and allow
+	  larger dma transfers increasing IO efficiency and reducing
+	  overhead. However the utilization of memory will increase.
+	  For example, each cached file will using a multiple of the
+	  page size to hold its contents and the difference between the
+	  end of file and the end of page is wasted.
+
+	  If unsure, choose 4K_PAGES.
+
+config MICROBLAZE_4K_PAGES
+	bool "4k page size"
+
+config MICROBLAZE_8K_PAGES
+	bool "8k page size"
+
+config MICROBLAZE_16K_PAGES
+	bool "16k page size"
+
+config MICROBLAZE_32K_PAGES
+	bool "32k page size"
+
+endchoice
+
 endmenu
 
 source "mm/Kconfig"
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
index 9dc708a7f70..e6e5e0da28c 100644
--- a/arch/microblaze/Kconfig.debug
+++ b/arch/microblaze/Kconfig.debug
@@ -10,6 +10,7 @@ source "lib/Kconfig.debug"
 
 config EARLY_PRINTK
 	bool "Early printk function for kernel"
+	depends on SERIAL_UARTLITE_CONSOLE
 	default n
 	help
 	  This option turns on/off early printk messages to console.
diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile
index 57f50c2371c..be01d78750d 100644
--- a/arch/microblaze/boot/Makefile
+++ b/arch/microblaze/boot/Makefile
@@ -35,13 +35,14 @@ quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
 
 quiet_cmd_strip = STRIP   $@
-      cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
+	cmd_strip = $(STRIP) -K microblaze_start -K _end -K __log_buf \
+				-K _fdt_start vmlinux -o $@
 
 quiet_cmd_uimage = UIMAGE  $@.ub
-      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \
-                   -C none -n 'Linux-$(KERNELRELEASE)' \
-                   -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \
-                   -d $@ $@.ub
+	cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \
+		-C none -n 'Linux-$(KERNELRELEASE)' \
+		-a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \
+		-d $@ $@.ub
 
 $(obj)/simpleImage.%: vmlinux FORCE
 	$(call if_changed,cp,.unstrip)
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index a6edd356cd0..7ebd955460d 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -17,6 +17,7 @@
 
 /* Somebody depends on this; sigh... */
 #include <linux/mm.h>
+#include <linux/io.h>
 
 /* Look at Documentation/cachetlb.txt */
 
@@ -60,7 +61,6 @@ void microblaze_cache_init(void);
 #define invalidate_icache()				mbc->iin();
 #define invalidate_icache_range(start, end)		mbc->iinr(start, end);
 
-
 #define flush_icache_user_range(vma, pg, adr, len)	flush_icache();
 #define flush_icache_page(vma, pg)			do { } while (0)
 
@@ -72,9 +72,15 @@ void microblaze_cache_init(void);
 #define flush_dcache()					mbc->dfl();
 #define flush_dcache_range(start, end)			mbc->dflr(start, end);
 
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-/* D-cache aliasing problem can't happen - cache is between MMU and ram */
-#define flush_dcache_page(page)			do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+/* MS: We have to implement it because of rootfs-jffs2 issue on WB */
+#define flush_dcache_page(page) \
+do { \
+	unsigned long addr = (unsigned long) page_address(page); /* virtual */ \
+	addr = (u32)virt_to_phys((void *)addr); \
+	flush_dcache_range((unsigned) (addr), (unsigned) (addr) + PAGE_SIZE); \
+} while (0);
+
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
@@ -97,8 +103,10 @@ void microblaze_cache_init(void);
 
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\
+	u32 addr = virt_to_phys(dst);					\
+	invalidate_icache_range((unsigned) (addr), (unsigned) (addr) + (len));\
 	memcpy((dst), (src), (len));					\
-	flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len));	\
+	flush_dcache_range((unsigned) (addr), (unsigned) (addr) + (len));\
 } while (0)
 
 #define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 18b3731c850..50738958070 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -79,12 +79,6 @@ static inline int dma_supported(struct device *dev, u64 mask)
 	return ops->dma_supported(dev, mask);
 }
 
-#ifdef CONFIG_PCI
-/* We have our own implementation of pci_set_dma_mask() */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
-#endif
-
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
diff --git a/arch/microblaze/include/asm/elf.h b/arch/microblaze/include/asm/elf.h
index 7d4acf2b278..732caf1be74 100644
--- a/arch/microblaze/include/asm/elf.h
+++ b/arch/microblaze/include/asm/elf.h
@@ -77,7 +77,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 #define ELF_DATA	ELFDATA2MSB
 #endif
 
-#define ELF_EXEC_PAGESIZE	4096
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
 
 
 #define ELF_CORE_COPY_REGS(_dest, _regs)			\
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 4c7b5d037c8..6479097b802 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -14,6 +14,11 @@
 #define _ASM_MICROBLAZE_EXCEPTIONS_H
 
 #ifdef __KERNEL__
+
+#ifndef CONFIG_MMU
+#define EX_HANDLER_STACK_SIZ	(4*19)
+#endif
+
 #ifndef __ASSEMBLY__
 
 /* Macros to enable and disable HW exceptions in the MSR */
@@ -64,22 +69,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#if defined(CONFIG_KGDB)
-void (*debugger)(struct pt_regs *regs);
-int (*debugger_bpt)(struct pt_regs *regs);
-int (*debugger_sstep)(struct pt_regs *regs);
-int (*debugger_iabr_match)(struct pt_regs *regs);
-int (*debugger_dabr_match)(struct pt_regs *regs);
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#define debugger(regs)			do { } while (0)
-#define debugger_bpt(regs)		0
-#define debugger_sstep(regs)		0
-#define debugger_iabr_match(regs)	0
-#define debugger_dabr_match(regs)	0
-#define debugger_fault_handler		((void (*)(struct pt_regs *))0)
-#endif
-
 #endif /*__ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 31a35c33df6..ec5583d6111 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -27,17 +27,6 @@ extern unsigned int nr_irq;
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/**
- * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
- * @device: Device node of the device whose interrupt is to be mapped
- * @index: Index of the interrupt to map
- *
- * This function is a wrapper that chains of_irq_map_one() and
- * irq_create_of_mapping() to make things easier to callers
- */
-struct device_node;
-extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
-
 /** FIXME - not implement
  * irq_dispose_mapping - Unmap an interrupt
  * @virq: linux virq number of the interrupt to unmap
@@ -62,17 +51,4 @@ struct irq_host;
 extern unsigned int irq_create_mapping(struct irq_host *host,
 					irq_hw_number_t hwirq);
 
-/**
- * irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					u32 *intspec, unsigned int intsize);
-
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/kgdb.h b/arch/microblaze/include/asm/kgdb.h
new file mode 100644
index 00000000000..78b17d40b23
--- /dev/null
+++ b/arch/microblaze/include/asm/kgdb.h
@@ -0,0 +1,28 @@
+#ifdef __KERNEL__
+#ifndef __MICROBLAZE_KGDB_H__
+#define __MICROBLAZE_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define CACHE_FLUSH_IS_SAFE	1
+#define BUFMAX			2048
+
+/*
+ * 32 32-bit general purpose registers (r0-r31)
+ *  6 32-bit special registers (pc, msr, ear, esr, fsr, btr)
+ * 12 32-bit PVR
+ *   7 32-bit MMU Regs (redr, rpid, rzpr, rtlbx, rtlbsx, rtlblo, rtlbhi)
+ * ------
+ *  57 registers
+ */
+#define NUMREGBYTES	(57 * 4)
+
+#define BREAK_INSTR_SIZE	4
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__("brki r16, 0x18;");
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MICROBLAZE_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/local64.h b/arch/microblaze/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/microblaze/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/microblaze/include/asm/of_device.h b/arch/microblaze/include/asm/of_device.h
deleted file mode 100644
index 73cb9804098..00000000000
--- a/arch/microblaze/include/asm/of_device.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
- *
- * based on PowerPC of_device.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_OF_DEVICE_H
-#define _ASM_MICROBLAZE_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device {
-	struct device		dev; /* Generic device interface */
-	struct pdev_archdata	archdata;
-};
-
-extern ssize_t of_device_get_modalias(struct of_device *ofdev,
-					char *str, ssize_t len);
-
-extern struct of_device *of_device_alloc(struct device_node *np,
-					 const char *bus_id,
-					 struct device *parent);
-
-extern int of_device_uevent(struct device *dev,
-			    struct kobj_uevent_env *env);
-
-extern void of_device_make_bus_id(struct of_device *dev);
-
-/* This is just here during the transition */
-#include <linux/of_device.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */
diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
deleted file mode 100644
index 37491276c6c..00000000000
--- a/arch/microblaze/include/asm/of_platform.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			<benh@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H
-#define _ASM_MICROBLAZE_OF_PLATFORM_H
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-/*
- * The list of OF IDs below is used for matching bus types in the
- * system whose devices are to be exposed as of_platform_devices.
- *
- * This is the default list valid for most platforms. This file provides
- * functions who can take an explicit list if necessary though
- *
- * The search is always performed recursively looking for children of
- * the provided device_node and recursively if such a children matches
- * a bus type in the list
- */
-
-static const struct of_device_id of_default_bus_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .type = "plb5", },
-	{ .type = "plb4", },
-	{ .type = "opb", },
-	{ .type = "simple", },
-	{},
-};
-
-/* Platform devices and busses creation */
-extern struct of_device *of_platform_device_create(struct device_node *np,
-						const char *bus_id,
-						struct device *parent);
-/* pseudo "matches" value to not do deep probe */
-#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
-
-extern int of_platform_bus_probe(struct device_node *root,
-				const struct of_device_id *matches,
-				struct device *parent);
-
-extern struct of_device *of_find_device_by_phandle(phandle ph);
-
-extern void of_instantiate_rtc(void);
-
-#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 464ff32bee3..4f268faa012 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -23,8 +23,16 @@
 #ifdef __KERNEL__
 
 /* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	(12)
-#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#if defined(CONFIG_MICROBLAZE_32K_PAGES)
+#define PAGE_SHIFT		15
+#elif defined(CONFIG_MICROBLAZE_16K_PAGES)
+#define PAGE_SHIFT		14
+#elif defined(CONFIG_MICROBLAZE_8K_PAGES)
+#define PAGE_SHIFT		13
+#else
+#define PAGE_SHIFT		12
+#endif
+#define PAGE_SIZE	(ASM_CONST(1) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
@@ -39,13 +47,6 @@
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
-/* align addr on a size boundary - adjust address up/down if needed */
-#define _ALIGN_UP(addr, size)	(((addr)+((size)-1))&(~((size)-1)))
-#define _ALIGN_DOWN(addr, size)	((addr)&(~((size)-1)))
-
-/* align addr on a size boundary - adjust address up if needed */
-#define _ALIGN(addr, size)	_ALIGN_UP(addr, size)
-
 #ifndef CONFIG_MMU
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. When not
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0c77cda9f5d..0c68764ab54 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -172,13 +172,8 @@ static inline int pci_has_flag(int flag)
 
 extern struct list_head hose_list;
 
-extern unsigned long pci_address_to_pio(phys_addr_t address);
 extern int pcibios_vaddr_is_ioport(void __iomem *address);
 #else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
 static inline int pcibios_vaddr_is_ioport(void __iomem *address)
 {
 	return 0;
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index e7d67a329bd..101fa098f62 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -20,9 +20,6 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
-#include <linux/of_fdt.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
@@ -50,29 +47,10 @@ extern void pci_create_OF_bus_map(void);
  * OF address retreival & translation
  */
 
-/* Translate an OF address block into a CPU physical address
- */
-extern u64 of_translate_address(struct device_node *np, const u32 *addr);
-
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern const u32 *of_get_address(struct device_node *dev, int index,
-			u64 *size, unsigned int *flags);
-extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
-			u64 *size, unsigned int *flags);
-
-/* Get an address as a resource. Note that if your address is
- * a PIO address, the conversion will fail if the physical address
- * can't be internally converted to an IO token with
- * pci_address_to_pio(), that is because it's either called to early
- * or it can't be matched to any host bridge IO space
- */
-extern int of_address_to_resource(struct device_node *dev, int index,
-				struct resource *r);
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
-				struct resource *r);
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#define pci_address_to_pio pci_address_to_pio
+#endif	/* CONFIG_PCI */
 
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
@@ -88,69 +66,6 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
 /* Get the MAC address */
 extern const void *of_get_mac_address(struct device_node *np);
 
-/*
- * OF interrupt mapping
- */
-
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC		4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
-	struct device_node *controller; /* Interrupt controller node */
-	u32 size; /* Specifier size */
-	u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
-};
-
-/**
- * of_irq_map_init - Initialize the irq remapper
- * @flags:	flags defining workarounds to enable
- *
- * Some machines have bugs in the device-tree which require certain workarounds
- * to be applied. Call this before any interrupt mapping attempts to enable
- * those workarounds.
- */
-#define OF_IMAP_OLDWORLD_MAC	0x00000001
-#define OF_IMAP_NO_PHANDLE	0x00000002
-
-extern void of_irq_map_init(unsigned int flags);
-
-/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent:	the device interrupt parent
- * @intspec:	interrupt specifier ("interrupts" property of the device)
- * @ointsize:	size of the passed in interrupt specifier
- * @addr:	address specifier (start of "reg" property of the device)
- * @out_irq:	structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
-			u32 ointsize, const u32 *addr,
-			struct of_irq *out_irq);
-
-/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device:	the device whose interrupt is to be resolved
- * @index:	index of the interrupt to resolve
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
-			struct of_irq *out_irq);
-
 /**
  * of_irq_map_pci - Resolve the interrupt for a PCI device
  * @pdev:	the device whose interrupt is to be resolved
@@ -163,20 +78,18 @@ extern int of_irq_map_one(struct device_node *device, int index,
  * resolving using the OF tree walking.
  */
 struct pci_dev;
+struct of_irq;
 extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
 
-extern int of_irq_to_resource(struct device_node *dev, int index,
-			struct resource *r);
-
-/**
- * of_iomap - Maps the memory mapped IO for a given device_node
- * @device:	the device whose io range will be mapped
- * @index:	index of the io range
- *
- * Returns a pointer to the mapped memory
- */
-extern void __iomem *of_iomap(struct device_node *device, int index);
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
+
+/* These includes are put at the bottom because they may contain things
+ * that are overridden by this file.  Ideally they shouldn't be included
+ * by this file, but there are a bunch of .c files that currently depend
+ * on it.  Eventually they will be cleaned up. */
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h
index e38abc7714b..9578666e98b 100644
--- a/arch/microblaze/include/asm/pvr.h
+++ b/arch/microblaze/include/asm/pvr.h
@@ -16,7 +16,7 @@
 #define PVR_MSR_BIT 0x400
 
 struct pvr_s {
-	unsigned pvr[16];
+	unsigned pvr[12];
 };
 
 /* The following taken from Xilinx's standalone BSP pvr.h */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 7f31394985e..782b5c89248 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -28,8 +28,6 @@ void disable_early_printk(void);
 void heartbeat(void);
 void setup_heartbeat(void);
 
-unsigned long long sched_clock(void);
-
 #   ifdef CONFIG_MMU
 extern void mmu_reset(void);
 extern void early_console_reg_tlb_alloc(unsigned int addr);
diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h
index 81e1f7d5b4c..e6a2284571d 100644
--- a/arch/microblaze/include/asm/system.h
+++ b/arch/microblaze/include/asm/system.h
@@ -45,7 +45,6 @@ extern struct task_struct *_switch_to(struct thread_info *prev,
 #define smp_rmb()		rmb()
 #define smp_wmb()		wmb()
 
-void show_trace(struct task_struct *task, unsigned long *stack);
 void __bad_xchg(volatile void *ptr, int size);
 
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
diff --git a/arch/microblaze/include/asm/topology.h b/arch/microblaze/include/asm/topology.h
index 96bcea5a992..5428f333a02 100644
--- a/arch/microblaze/include/asm/topology.h
+++ b/arch/microblaze/include/asm/topology.h
@@ -1,11 +1 @@
 #include <asm-generic/topology.h>
-
-#ifndef _ASM_MICROBLAZE_TOPOLOGY_H
-#define _ASM_MICROBLAZE_TOPOLOGY_H
-
-struct device_node;
-static inline int of_node_to_nid(struct device_node *device)
-{
-	return 0;
-}
-#endif /* _ASM_MICROBLAZE_TOPOLOGY_H */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 26460d15b33..d840f4a2d3c 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -359,7 +359,7 @@ extern long __user_bad(void);
 	__copy_tofrom_user((__force void __user *)(to), \
 				(void __user *)(from), (n))
 #define __copy_from_user_inatomic(to, from, n) \
-		copy_from_user((to), (from), (n))
+		__copy_from_user((to), (from), (n))
 
 static inline long copy_from_user(void *to,
 		const void __user *from, unsigned long n)
@@ -373,7 +373,7 @@ static inline long copy_from_user(void *to,
 #define __copy_to_user(to, from, n)	\
 		__copy_tofrom_user((void __user *)(to), \
 			(__force const void __user *)(from), (n))
-#define __copy_to_user_inatomic(to, from, n)	copy_to_user((to), (from), (n))
+#define __copy_to_user_inatomic(to, from, n) __copy_to_user((to), (from), (n))
 
 static inline long copy_to_user(void __user *to,
 		const void *from, unsigned long n)
diff --git a/arch/microblaze/include/asm/unwind.h b/arch/microblaze/include/asm/unwind.h
new file mode 100644
index 00000000000..d248b7de4b1
--- /dev/null
+++ b/arch/microblaze/include/asm/unwind.h
@@ -0,0 +1,29 @@
+/*
+ * Backtrace support for Microblaze
+ *
+ * Copyright (C) 2010  Digital Design Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __MICROBLAZE_UNWIND_H
+#define __MICROBLAZE_UNWIND_H
+
+struct stack_trace;
+
+struct trap_handler_info {
+	unsigned long start_addr;
+	unsigned long end_addr;
+	const char    *trap_name;
+};
+extern struct trap_handler_info microblaze_trap_handlers;
+
+extern const char _hw_exception_handler;
+extern const char ex_handler_unhandled;
+
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace);
+
+#endif	/* __MICROBLAZE_UNWIND_H */
+
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index e51bc152082..f0cb5c26c81 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -15,9 +15,9 @@ endif
 extra-y := head.o vmlinux.lds
 
 obj-y += dma.o exceptions.o \
-	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
-	of_platform.o process.o prom.o prom_parse.o ptrace.o \
-	setup.o signal.o sys_microblaze.o timer.o traps.o reset.o
+	hw_exception_handler.o init_task.o intc.o irq.o \
+	process.o prom.o prom_parse.o ptrace.o \
+	reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
 
 obj-y += cpu/
 
@@ -28,5 +28,6 @@ obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o mcount.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index 4216eb1eaa3..7086e356428 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -126,6 +126,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			cpuinfo.pvr_user1,
 			cpuinfo.pvr_user2);
 
+	count += seq_printf(m, "Page size:\t%lu\n", PAGE_SIZE);
 	return 0;
 }
 
diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S
index 8cc18cd2cce..ca84368570b 100644
--- a/arch/microblaze/kernel/entry-nommu.S
+++ b/arch/microblaze/kernel/entry-nommu.S
@@ -588,3 +588,31 @@ sys_rt_sigsuspend_wrapper:
 #include "syscall_table.S"
 
 syscall_table_size=(.-sys_call_table)
+
+type_SYSCALL:
+	.ascii "SYSCALL\0"
+type_IRQ:
+	.ascii "IRQ\0"
+type_IRQ_PREEMPT:
+	.ascii "IRQ (PREEMPTED)\0"
+type_SYSCALL_PREEMPT:
+	.ascii " SYSCALL (PREEMPTED)\0"
+
+	/*
+	 * Trap decoding for stack unwinder
+	 * Tuples are (start addr, end addr, string)
+	 * If return address lies on [start addr, end addr],
+	 * unwinder displays 'string'
+	 */
+
+	.align 4
+.global microblaze_trap_handlers
+microblaze_trap_handlers:
+	/* Exact matches come first */
+	.word ret_to_user  ; .word ret_to_user    ; .word type_SYSCALL
+	.word ret_from_intr; .word ret_from_intr  ; .word type_IRQ
+	/* Fuzzy matches go here */
+	.word ret_from_intr; .word no_intr_resched; .word type_IRQ_PREEMPT
+	.word work_pending ; .word no_work_pending; .word type_SYSCALL_PREEMPT
+	/* End of table */
+	.word 0             ; .word 0               ; .word 0
diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S
index c0ede25c5b9..304882e5645 100644
--- a/arch/microblaze/kernel/entry.S
+++ b/arch/microblaze/kernel/entry.S
@@ -48,128 +48,107 @@
  */
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	.macro	clear_bip
-	msrclr	r11, MSR_BIP
-	nop
+	msrclr	r0, MSR_BIP
 	.endm
 
 	.macro	set_bip
-	msrset	r11, MSR_BIP
-	nop
+	msrset	r0, MSR_BIP
 	.endm
 
 	.macro	clear_eip
-	msrclr	r11, MSR_EIP
-	nop
+	msrclr	r0, MSR_EIP
 	.endm
 
 	.macro	set_ee
-	msrset	r11, MSR_EE
-	nop
+	msrset	r0, MSR_EE
 	.endm
 
 	.macro	disable_irq
-	msrclr	r11, MSR_IE
-	nop
+	msrclr	r0, MSR_IE
 	.endm
 
 	.macro	enable_irq
-	msrset	r11, MSR_IE
-	nop
+	msrset	r0, MSR_IE
 	.endm
 
 	.macro	set_ums
-	msrset	r11, MSR_UMS
-	nop
-	msrclr	r11, MSR_VMS
-	nop
+	msrset	r0, MSR_UMS
+	msrclr	r0, MSR_VMS
 	.endm
 
 	.macro	set_vms
-	msrclr	r11, MSR_UMS
-	nop
-	msrset	r11, MSR_VMS
-	nop
+	msrclr	r0, MSR_UMS
+	msrset	r0, MSR_VMS
+	.endm
+
+	.macro	clear_ums
+	msrclr	r0, MSR_UMS
 	.endm
 
 	.macro	clear_vms_ums
-	msrclr	r11, MSR_VMS
-	nop
-	msrclr	r11, MSR_UMS
-	nop
+	msrclr	r0, MSR_VMS | MSR_UMS
 	.endm
 #else
 	.macro	clear_bip
 	mfs	r11, rmsr
-	nop
 	andi	r11, r11, ~MSR_BIP
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	set_bip
 	mfs	r11, rmsr
-	nop
 	ori	r11, r11, MSR_BIP
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	clear_eip
 	mfs	r11, rmsr
-	nop
 	andi	r11, r11, ~MSR_EIP
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	set_ee
 	mfs	r11, rmsr
-	nop
 	ori	r11, r11, MSR_EE
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	disable_irq
 	mfs	r11, rmsr
-	nop
 	andi	r11, r11, ~MSR_IE
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	enable_irq
 	mfs	r11, rmsr
-	nop
 	ori	r11, r11, MSR_IE
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro set_ums
 	mfs	r11, rmsr
-	nop
 	ori	r11, r11, MSR_VMS
 	andni	r11, r11, MSR_UMS
 	mts	rmsr, r11
-	nop
 	.endm
 
 	.macro	set_vms
 	mfs	r11, rmsr
-	nop
 	ori	r11, r11, MSR_VMS
 	andni	r11, r11, MSR_UMS
 	mts	rmsr, r11
-	nop
+	.endm
+
+	.macro	clear_ums
+	mfs	r11, rmsr
+	andni	r11, r11, MSR_UMS
+	mts	rmsr,r11
 	.endm
 
 	.macro	clear_vms_ums
 	mfs	r11, rmsr
-	nop
 	andni	r11, r11, (MSR_VMS|MSR_UMS)
 	mts	rmsr,r11
-	nop
 	.endm
 #endif
 
@@ -180,18 +159,22 @@
 
 /* turn on virtual protected mode save */
 #define VM_ON		\
-	set_ums;		\
+	set_ums;	\
 	rted	r0, 2f;	\
-2: nop;
+	nop; \
+2:
 
 /* turn off virtual protected mode save and user mode save*/
 #define VM_OFF			\
-	clear_vms_ums;			\
+	clear_vms_ums;		\
 	rted	r0, TOPHYS(1f);	\
-1: nop;
+	nop; \
+1:
 
 #define SAVE_REGS \
 	swi	r2, r1, PTO+PT_R2;	/* Save SDA */			\
+	swi	r3, r1, PTO+PT_R3;					\
+	swi	r4, r1, PTO+PT_R4;					\
 	swi	r5, r1, PTO+PT_R5;					\
 	swi	r6, r1, PTO+PT_R6;					\
 	swi	r7, r1, PTO+PT_R7;					\
@@ -218,14 +201,14 @@
 	swi	r30, r1, PTO+PT_R30;					\
 	swi	r31, r1, PTO+PT_R31;	/* Save current task reg */	\
 	mfs	r11, rmsr;		/* save MSR */			\
-	nop;								\
 	swi	r11, r1, PTO+PT_MSR;
 
 #define RESTORE_REGS \
 	lwi	r11, r1, PTO+PT_MSR;					\
 	mts	rmsr , r11;						\
-	nop;								\
 	lwi	r2, r1, PTO+PT_R2;	/* restore SDA */		\
+	lwi	r3, r1, PTO+PT_R3;					\
+	lwi	r4, r1, PTO+PT_R4;					\
 	lwi	r5, r1, PTO+PT_R5;					\
 	lwi	r6, r1, PTO+PT_R6;					\
 	lwi	r7, r1, PTO+PT_R7;					\
@@ -252,6 +235,39 @@
 	lwi	r30, r1, PTO+PT_R30;					\
 	lwi	r31, r1, PTO+PT_R31;	/* Restore cur task reg */
 
+#define SAVE_STATE	\
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* save stack */	\
+	/* See if already in kernel mode.*/				\
+	mfs	r1, rmsr;						\
+	andi	r1, r1, MSR_UMS;					\
+	bnei	r1, 1f;						\
+	/* Kernel-mode state save.  */					\
+	/* Reload kernel stack-ptr. */					\
+	lwi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	/* FIXME: I can add these two lines to one */			\
+	/* tophys(r1,r1); */						\
+	/* addik	r1, r1, -STATE_SAVE_SIZE; */			\
+	addik	r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \
+	SAVE_REGS							\
+	brid	2f;							\
+	swi	r1, r1, PTO+PT_MODE; 	 				\
+1:	/* User-mode state save.  */					\
+	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
+	tophys(r1,r1);							\
+	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */	\
+	/* MS these three instructions can be added to one */		\
+	/* addik	r1, r1, THREAD_SIZE; */				\
+	/* tophys(r1,r1); */						\
+	/* addik	r1, r1, -STATE_SAVE_SIZE; */			\
+	addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE; \
+	SAVE_REGS							\
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
+	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
+	swi	r0, r1, PTO + PT_MODE; /* Was in user-mode.  */		\
+	/* MS: I am clearing UMS even in case when I come from kernel space */ \
+	clear_ums; 							\
+2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+
 .text
 
 /*
@@ -267,45 +283,23 @@
  * are masked. This is nice, means we don't have to CLI before state save
  */
 C_ENTRY(_user_exception):
-	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
 	addi	r14, r14, 4	/* return address is 4 byte after call */
-	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* Save r11 */
-
-	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
-	beqi	r11, 1f;		/* Jump ahead if coming from user */
-/* Kernel-mode state save. */
-	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
-	tophys(r1,r11);
-	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
-
-	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack. */
-	SAVE_REGS
-
-	addi	r11, r0, 1; 		/* Was in kernel-mode. */
-	swi	r11, r1, PTO+PT_MODE; /* pt_regs -> kernel mode */
-	brid	2f;
-	nop;				/* Fill delay slot */
+	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
 
-/* User-mode state save.  */
-1:
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11);	/* restore r11 */
 	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
 	tophys(r1,r1);
 	lwi	r1, r1, TS_THREAD_INFO;	/* get stack from task_struct */
-/* calculate kernel stack pointer from task struct 8k */
-	addik	r1, r1, THREAD_SIZE;
-	tophys(r1,r1);
-
-	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
+	/* MS these three instructions can be added to one */
+	/* addik	r1, r1, THREAD_SIZE; */
+	/* tophys(r1,r1); */
+	/* addik	r1, r1, -STATE_SAVE_SIZE; */
+	addik r1, r1, THREAD_SIZE + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE;
 	SAVE_REGS
 
-	swi	r0, r1, PTO+PT_MODE;			/* Was in user-mode. */
 	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
 	swi	r11, r1, PTO+PT_R1;		/* Store user SP.  */
-	addi	r11, r0, 1;
-	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
+	clear_ums;
+	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	/* Save away the syscall number.  */
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
@@ -316,10 +310,8 @@ C_ENTRY(_user_exception):
  * register should point to the location where
  * the called function should return.  [note that MAKE_SYS_CALL uses label 1] */
 
-	# Step into virtual mode.
-	set_vms;
-	addik	r11, r0, 3f
-	rtid	r11, 0
+	/* Step into virtual mode */
+	rtbd	r0, 3f
 	nop
 3:
 	lwi	r11, CURRENT_TASK, TS_THREAD_INFO /* get thread info */
@@ -363,24 +355,17 @@ C_ENTRY(_user_exception):
 	# Find and jump into the syscall handler.
 	lwi	r12, r12, sys_call_table
 	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
-	la	r15, r0, ret_from_trap-8
+	addi	r15, r0, ret_from_trap-8
 	bra	r12
 
 	/* The syscall number is invalid, return an error.  */
 5:
+	rtsd	r15, 8;		/* looks like a normal subroutine return */
 	addi	r3, r0, -ENOSYS;
-	rtsd	r15,8;		/* looks like a normal subroutine return */
-	or 	r0, r0, r0
-
 
 /* Entry point used to return from a syscall/trap */
 /* We re-enable BIP bit before state restore */
 C_ENTRY(ret_from_trap):
-	set_bip;			/*  Ints masked for state restore*/
-	lwi	r11, r1, PTO+PT_MODE;
-/* See if returning to kernel mode, if so, skip resched &c.  */
-	bnei	r11, 2f;
-
 	swi	r3, r1, PTO + PT_R3
 	swi	r4, r1, PTO + PT_R4
 
@@ -413,32 +398,19 @@ C_ENTRY(ret_from_trap):
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
 
-	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	addik	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
 	addi	r7, r0, 1;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
 	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 /* Finally, return to user state.  */
-1:
-	lwi	r3, r1, PTO + PT_R3; /* restore syscall result */
-	lwi	r4, r1, PTO + PT_R4;
-
-	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+1:	set_bip;			/*  Ints masked for state restore */
 	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 	RESTORE_REGS;
 	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
 	lwi	r1, r1, PT_R1 - PT_SIZE;/* Restore user stack pointer. */
-	bri	6f;
-
-/* Return to kernel state.  */
-2:	VM_OFF;
-	tophys(r1,r1);
-	RESTORE_REGS;
-	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
-	tovirt(r1,r1);
-6:
 TRAP_return:		/* Make global symbol for debugging */
 	rtbd	r14, 0;	/* Instructions to return from an IRQ */
 	nop;
@@ -450,12 +422,11 @@ TRAP_return:		/* Make global symbol for debugging */
 C_ENTRY(sys_fork_wrapper):
 	addi	r5, r0, SIGCHLD			/* Arg 0: flags */
 	lwi	r6, r1, PTO+PT_R1	/* Arg 1: child SP (use parent's) */
-	la	r7, r1, PTO			/* Arg 2: parent context */
+	addik	r7, r1, PTO			/* Arg 2: parent context */
 	add	r8. r0, r0			/* Arg 3: (unused) */
 	add	r9, r0, r0;			/* Arg 4: (unused) */
-	add	r10, r0, r0;			/* Arg 5: (unused) */
 	brid	do_fork		/* Do real work (tail-call) */
-	nop;
+	add	r10, r0, r0;			/* Arg 5: (unused) */
 
 /* This the initial entry point for a new child thread, with an appropriate
    stack in place that makes it look the the child is in the middle of an
@@ -466,35 +437,31 @@ C_ENTRY(ret_from_fork):
 	bralid	r15, schedule_tail; /* ...which is schedule_tail's arg */
 	add	r3, r5, r0;	/* switch_thread returns the prev task */
 				/* ( in the delay slot ) */
-	add	r3, r0, r0;	/* Child's fork call should return 0. */
 	brid	ret_from_trap;	/* Do normal trap return */
-	nop;
+	add	r3, r0, r0;	/* Child's fork call should return 0. */
 
 C_ENTRY(sys_vfork):
 	brid	microblaze_vfork	/* Do real work (tail-call) */
-	la	r5, r1, PTO
+	addik	r5, r1, PTO
 
 C_ENTRY(sys_clone):
 	bnei	r6, 1f;			/* See if child SP arg (arg 1) is 0. */
-	lwi	r6, r1, PTO+PT_R1;	/* If so, use paret's stack ptr */
-1:	la	r7, r1, PTO;			/* Arg 2: parent context */
+	lwi	r6, r1, PTO + PT_R1;	/* If so, use paret's stack ptr */
+1:	addik	r7, r1, PTO;			/* Arg 2: parent context */
 	add	r8, r0, r0;			/* Arg 3: (unused) */
 	add	r9, r0, r0;			/* Arg 4: (unused) */
-	add	r10, r0, r0;			/* Arg 5: (unused) */
 	brid	do_fork		/* Do real work (tail-call) */
-	nop;
+	add	r10, r0, r0;			/* Arg 5: (unused) */
 
 C_ENTRY(sys_execve):
-	la	r8, r1, PTO;		/* add user context as 4th arg */
 	brid	microblaze_execve;	/* Do real work (tail-call).*/
-	nop;
+	addik	r8, r1, PTO;		/* add user context as 4th arg */
 
 C_ENTRY(sys_rt_sigreturn_wrapper):
 	swi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	swi	r4, r1, PTO+PT_R4;
-	la	r5, r1, PTO;		/* add user context as 1st arg */
 	brlid	r15, sys_rt_sigreturn	/* Do real work */
-	nop;
+	addik	r5, r1, PTO;		/* add user context as 1st arg */
 	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
 	lwi	r4, r1, PTO+PT_R4;
 	bri ret_from_trap /* fall through will not work here due to align */
@@ -503,83 +470,23 @@ C_ENTRY(sys_rt_sigreturn_wrapper):
 /*
  * HW EXCEPTION rutine start
  */
-
-#define SAVE_STATE	\
-	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */	\
-	set_bip;	/*equalize initial state for all possible entries*/\
-	clear_eip;							\
-	enable_irq;							\
-	set_ee;								\
-	/* See if already in kernel mode.*/				\
-	lwi	r11, r0, TOPHYS(PER_CPU(KM));				\
-	beqi	r11, 1f;		/* Jump ahead if coming from user */\
-	/* Kernel-mode state save.  */					\
-	/* Reload kernel stack-ptr. */					\
-	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
-	tophys(r1,r11);							\
-	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */	\
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
-	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
-	/* store return registers separately because			\
-	 * this macros is use for others exceptions */			\
-	swi	r3, r1, PTO + PT_R3;					\
-	swi	r4, r1, PTO + PT_R4;					\
-	SAVE_REGS							\
-	/* PC, before IRQ/trap - this is one instruction above */	\
-	swi	r17, r1, PTO+PT_PC;					\
-									\
-	addi	r11, r0, 1; 		/* Was in kernel-mode.  */	\
-	swi	r11, r1, PTO+PT_MODE; 	 				\
-	brid	2f;							\
-	nop;				/* Fill delay slot */		\
-1:	/* User-mode state save.  */					\
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */\
-	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */\
-	tophys(r1,r1);							\
-	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */	\
-	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */\
-	tophys(r1,r1);							\
-									\
-	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */\
-	/* store return registers separately because this macros	\
-	 * is use for others exceptions */				\
-	swi	r3, r1, PTO + PT_R3; 					\
-	swi	r4, r1, PTO + PT_R4;					\
-	SAVE_REGS							\
-	/* PC, before IRQ/trap - this is one instruction above FIXME*/	\
-	swi	r17, r1, PTO+PT_PC;					\
-									\
-	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */		\
-	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));			\
-	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */		\
-	addi	r11, r0, 1;						\
-	swi	r11, r0, TOPHYS(PER_CPU(KM)); /* Now we're in kernel-mode.*/\
-2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));	\
-	/* Save away the syscall number.  */				\
-	swi	r0, r1, PTO+PT_R0;					\
-	tovirt(r1,r1)
-
 C_ENTRY(full_exception_trap):
-	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
 	/* adjust exception address for privileged instruction
 	 * for finding where is it */
 	addik	r17, r17, -4
 	SAVE_STATE /* Save registers */
+	/* PC, before IRQ/trap - this is one instruction above */
+	swi	r17, r1, PTO+PT_PC;
+	tovirt(r1,r1)
 	/* FIXME this can be store directly in PT_ESR reg.
 	 * I tested it but there is a fault */
 	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
-	la	r15, r0, ret_from_exc - 8
-	la	r5, r1, PTO		 /* parameter struct pt_regs * regs */
+	addik	r15, r0, ret_from_exc - 8
 	mfs	r6, resr
-	nop
 	mfs	r7, rfsr;		/* save FSR */
-	nop
 	mts	rfsr, r0;	/* Clear sticky fsr */
-	nop
-	la	r12, r0, full_exception
-	set_vms;
-	rtbd	r12, 0;
-	nop;
+	rted	r0, full_exception
+	addik	r5, r1, PTO		 /* parameter struct pt_regs * regs */
 
 /*
  * Unaligned data trap.
@@ -592,19 +499,27 @@ C_ENTRY(full_exception_trap):
  * The assembler routine is in "arch/microblaze/kernel/hw_exception_handler.S"
  */
 C_ENTRY(unaligned_data_trap):
-	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
+	/* MS: I have to save r11 value and then restore it because
+	 * set_bit, clear_eip, set_ee use r11 as temp register if MSR
+	 * instructions are not used. We don't need to do if MSR instructions
+	 * are used and they use r0 instead of r11.
+	 * I am using ENTRY_SP which should be primary used only for stack
+	 * pointer saving. */
+	swi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
+	set_bip;        /* equalize initial state for all possible entries */
+	clear_eip;
+	set_ee;
+	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
 	SAVE_STATE		/* Save registers.*/
+	/* PC, before IRQ/trap - this is one instruction above */
+	swi	r17, r1, PTO+PT_PC;
+	tovirt(r1,r1)
 	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
-	la	r15, r0, ret_from_exc-8
+	addik	r15, r0, ret_from_exc-8
 	mfs	r3, resr		/* ESR */
-	nop
 	mfs	r4, rear		/* EAR */
-	nop
-	la	r7, r1, PTO		/* parameter struct pt_regs * regs */
-	la	r12, r0, _unaligned_data_exception
-	set_vms;
-	rtbd	r12, 0;	/* interrupts enabled */
-	nop;
+	rtbd	r0, _unaligned_data_exception
+	addik	r7, r1, PTO		/* parameter struct pt_regs * regs */
 
 /*
  * Page fault traps.
@@ -625,38 +540,32 @@ C_ENTRY(unaligned_data_trap):
  */
 /* data and intruction trap - which is choose is resolved int fault.c */
 C_ENTRY(page_fault_data_trap):
-	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
 	SAVE_STATE		/* Save registers.*/
+	/* PC, before IRQ/trap - this is one instruction above */
+	swi	r17, r1, PTO+PT_PC;
+	tovirt(r1,r1)
 	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
-	la	r15, r0, ret_from_exc-8
-	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	addik	r15, r0, ret_from_exc-8
 	mfs	r6, rear		/* parameter unsigned long address */
-	nop
 	mfs	r7, resr		/* parameter unsigned long error_code */
-	nop
-	la	r12, r0, do_page_fault
-	set_vms;
-	rtbd	r12, 0;	/* interrupts enabled */
-	nop;
+	rted	r0, do_page_fault
+	addik	r5, r1, PTO		/* parameter struct pt_regs * regs */
 
 C_ENTRY(page_fault_instr_trap):
-	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)) /* save stack */
 	SAVE_STATE		/* Save registers.*/
+	/* PC, before IRQ/trap - this is one instruction above */
+	swi	r17, r1, PTO+PT_PC;
+	tovirt(r1,r1)
 	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
-	la	r15, r0, ret_from_exc-8
-	la	r5, r1, PTO		/* parameter struct pt_regs * regs */
+	addik	r15, r0, ret_from_exc-8
 	mfs	r6, rear		/* parameter unsigned long address */
-	nop
 	ori	r7, r0, 0		/* parameter unsigned long error_code */
-	la	r12, r0, do_page_fault
-	set_vms;
-	rtbd	r12, 0;	/* interrupts enabled */
-	nop;
+	rted	r0, do_page_fault
+	addik	r5, r1, PTO		/* parameter struct pt_regs * regs */
 
 /* Entry point used to return from an exception.  */
 C_ENTRY(ret_from_exc):
-	set_bip;			/*  Ints masked for state restore*/
-	lwi	r11, r1, PTO+PT_MODE;
+	lwi	r11, r1, PTO + PT_MODE;
 	bnei	r11, 2f;		/* See if returning to kernel mode, */
 					/* ... if so, skip resched &c.  */
 
@@ -687,32 +596,27 @@ C_ENTRY(ret_from_exc):
 	 * traps), but signal handlers may want to examine or change the
 	 * complete register state.  Here we save anything not saved by
 	 * the normal entry sequence, so that it may be safely restored
-	 * (in a possibly modified form) after do_signal returns.
-	 * store return registers separately because this macros is use
-	 * for others exceptions */
-	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	 * (in a possibly modified form) after do_signal returns. */
+	addik	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
 	addi	r7, r0, 0;		/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
 	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
 /* Finally, return to user state.  */
-1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
+1:	set_bip;			/* Ints masked for state restore */
 	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
 
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
 	RESTORE_REGS;
 	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
 
 	lwi	r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer. */
 	bri	6f;
 /* Return to kernel state.  */
-2:	VM_OFF;
+2:	set_bip;			/* Ints masked for state restore */
+	VM_OFF;
 	tophys(r1,r1);
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
 	RESTORE_REGS;
 	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
 
@@ -736,36 +640,23 @@ C_ENTRY(_interrupt):
 /* MS: we are in physical address */
 /* Save registers, switch to proper stack, convert SP to virtual.*/
 	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
-	swi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
 	/* MS: See if already in kernel mode. */
-	lwi	r11, r0, TOPHYS(PER_CPU(KM));
-	beqi	r11, 1f; /* MS: Jump ahead if coming from user */
+	mfs	r1, rmsr
+	nop
+	andi	r1, r1, MSR_UMS
+	bnei	r1, 1f
 
 /* Kernel-mode state save. */
-	or	r11, r1, r0
-	tophys(r1,r11); /* MS: I have in r1 physical address where stack is */
-/* MS: Save original SP - position PT_R1 to next stack frame 4 *1 - 152*/
-	swi	r11, r1, (PT_R1 - PT_SIZE);
-/* MS: restore r11 because of saving in SAVE_REGS */
-	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
+	lwi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
+	tophys(r1,r1); /* MS: I have in r1 physical address where stack is */
 	/* save registers */
 /* MS: Make room on the stack -> activation record */
 	addik	r1, r1, -STATE_SAVE_SIZE;
-/* MS: store return registers separately because
- * this macros is use for others exceptions */
-	swi	r3, r1, PTO + PT_R3;
-	swi	r4, r1, PTO + PT_R4;
 	SAVE_REGS
-	/* MS: store mode */
-	addi	r11, r0, 1; /* MS: Was in kernel-mode. */
-	swi	r11, r1, PTO + PT_MODE; /* MS: and save it */
 	brid	2f;
-	nop; /* MS: Fill delay slot */
-
+	swi	r1, r1, PTO + PT_MODE; /* 0 - user mode, 1 - kernel mode */
 1:
 /* User-mode state save. */
-/* MS: restore r11 -> FIXME move before SAVE_REG */
-	lwi	r11, r0, TOPHYS(PER_CPU(R11_SAVE));
  /* MS: get the saved current */
 	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	tophys(r1,r1);
@@ -774,27 +665,18 @@ C_ENTRY(_interrupt):
 	tophys(r1,r1);
 	/* save registers */
 	addik	r1, r1, -STATE_SAVE_SIZE;
-	swi	r3, r1, PTO+PT_R3;
-	swi	r4, r1, PTO+PT_R4;
 	SAVE_REGS
 	/* calculate mode */
 	swi	r0, r1, PTO + PT_MODE;
 	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
 	swi	r11, r1, PTO+PT_R1;
-	/* setup kernel mode to KM */
-	addi	r11, r0, 1;
-	swi	r11, r0, TOPHYS(PER_CPU(KM));
-
+	clear_ums;
 2:
 	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
-	swi	r0, r1, PTO + PT_R0;
 	tovirt(r1,r1)
-	la	r5, r1, PTO;
-	set_vms;
-	la	r11, r0, do_IRQ;
-	la	r15, r0, irq_call;
-irq_call:rtbd	r11, 0;
-	nop;
+	addik	r15, r0, irq_call;
+irq_call:rtbd	r0, do_IRQ;
+	addik	r5, r1, PTO;
 
 /* MS: we are in virtual mode */
 ret_from_irq:
@@ -815,7 +697,7 @@ ret_from_irq:
 	beqid	r11, no_intr_resched
 /* Handle a signal return; Pending signals should be in r18. */
 	addi	r7, r0, 0; /* Arg 3: int in_syscall */
-	la	r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
+	addik	r5, r1, PTO; /* Arg 1: struct pt_regs *regs */
 	bralid	r15, do_signal;	/* Handle any signals */
 	add	r6, r0, r0; /* Arg 2: sigset_t *oldset */
 
@@ -823,12 +705,9 @@ ret_from_irq:
 no_intr_resched:
     /* Disable interrupts, we are now committed to the state restore */
 	disable_irq
-	swi	r0, r0, PER_CPU(KM); /* MS: Now officially in user state. */
 	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE);
 	VM_OFF;
 	tophys(r1,r1);
-	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
-	lwi	r4, r1, PTO + PT_R4;
 	RESTORE_REGS
 	addik	r1, r1, STATE_SAVE_SIZE /* MS: Clean up stack space. */
 	lwi	r1, r1, PT_R1 - PT_SIZE;
@@ -857,8 +736,6 @@ restore:
 #endif
 	VM_OFF /* MS: turn off MMU */
 	tophys(r1,r1)
-	lwi	r3, r1, PTO + PT_R3; /* MS: restore saved r3, r4 registers */
-	lwi	r4, r1, PTO + PT_R4;
 	RESTORE_REGS
 	addik	r1, r1, STATE_SAVE_SIZE	/* MS: Clean up stack space. */
 	tovirt(r1,r1);
@@ -868,86 +745,91 @@ IRQ_return: /* MS: Make global symbol for debugging */
 	nop
 
 /*
- * `Debug' trap
- *  We enter dbtrap in "BIP" (breakpoint) mode.
- *  So we exit the breakpoint mode with an 'rtbd' and proceed with the
- *  original dbtrap.
- *  however, wait to save state first
+ * Debug trap for KGDB. Enter to _debug_exception by brki r16, 0x18
+ * and call handling function with saved pt_regs
  */
 C_ENTRY(_debug_exception):
 	/* BIP bit is set on entry, no interrupts can occur */
 	swi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP))
 
-	swi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* Save r11 */
-	set_bip;	/*equalize initial state for all possible entries*/
-	clear_eip;
-	enable_irq;
-	lwi	r11, r0, TOPHYS(PER_CPU(KM));/* See if already in kernel mode.*/
-	beqi	r11, 1f;		/* Jump ahead if coming from user */
-	/* Kernel-mode state save.  */
-	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
-	tophys(r1,r11);
-	swi	r11, r1, (PT_R1-PT_SIZE); /* Save original SP. */
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
+	mfs	r1, rmsr
+	nop
+	andi	r1, r1, MSR_UMS
+	bnei	r1, 1f
+/* MS: Kernel-mode state save - kgdb */
+	lwi	r1, r0, TOPHYS(PER_CPU(ENTRY_SP)); /* Reload kernel stack-ptr*/
 
-	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
-	swi	r3, r1, PTO + PT_R3;
-	swi	r4, r1, PTO + PT_R4;
+	/* BIP bit is set on entry, no interrupts can occur */
+	addik   r1, r1, CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START - STATE_SAVE_SIZE;
 	SAVE_REGS;
+	/* save all regs to pt_reg structure */
+	swi	r0, r1, PTO+PT_R0;	/* R0 must be saved too */
+	swi	r14, r1, PTO+PT_R14	/* rewrite saved R14 value */
+	swi	r16, r1, PTO+PT_R16
+	swi	r16, r1, PTO+PT_PC; /* PC and r16 are the same */
+	swi	r17, r1, PTO+PT_R17
+	/* save special purpose registers to pt_regs */
+	mfs	r11, rear;
+	swi	r11, r1, PTO+PT_EAR;
+	mfs	r11, resr;
+	swi	r11, r1, PTO+PT_ESR;
+	mfs	r11, rfsr;
+	swi	r11, r1, PTO+PT_FSR;
+
+	/* stack pointer is in physical address at it is decrease
+	 * by STATE_SAVE_SIZE but we need to get correct R1 value */
+	addik   r11, r1, CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR + STATE_SAVE_SIZE;
+	swi	r11, r1, PTO+PT_R1
+	/* MS: r31 - current pointer isn't changed */
+	tovirt(r1,r1)
+#ifdef CONFIG_KGDB
+	addi	r5, r1, PTO /* pass pt_reg address as the first arg */
+	la	r15, r0, dbtrap_call; /* return address */
+	rtbd	r0, microblaze_kgdb_break
+	nop;
+#endif
+	/* MS: Place handler for brki from kernel space if KGDB is OFF.
+	 * It is very unlikely that another brki instruction is called. */
+	bri 0
 
-	addi	r11, r0, 1; 		/* Was in kernel-mode.  */
-	swi	r11, r1, PTO + PT_MODE;
-	brid	2f;
-	nop;				/* Fill delay slot */
-1:      /* User-mode state save.  */
-	lwi	r11, r0, TOPHYS(r0_ram + PTO + PT_R11); /* restore r11 */
-	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
+/* MS: User-mode state save - gdb */
+1:	lwi	r1, r0, TOPHYS(PER_CPU(CURRENT_SAVE)); /* get saved current */
 	tophys(r1,r1);
 	lwi	r1, r1, TS_THREAD_INFO;	/* get the thread info */
 	addik	r1, r1, THREAD_SIZE;	/* calculate kernel stack pointer */
 	tophys(r1,r1);
 
 	addik	r1, r1, -STATE_SAVE_SIZE; /* Make room on the stack.  */
-	swi	r3, r1, PTO + PT_R3;
-	swi	r4, r1, PTO + PT_R4;
 	SAVE_REGS;
-
-	swi	r0, r1, PTO+PT_MODE; /* Was in user-mode.  */
+	swi	r17, r1, PTO+PT_R17;
+	swi	r16, r1, PTO+PT_R16;
+	swi	r16, r1, PTO+PT_PC;	/* Save LP */
+	swi	r0, r1, PTO + PT_MODE; /* Was in user-mode.  */
 	lwi	r11, r0, TOPHYS(PER_CPU(ENTRY_SP));
 	swi	r11, r1, PTO+PT_R1; /* Store user SP.  */
-	addi	r11, r0, 1;
-	swi	r11, r0, TOPHYS(PER_CPU(KM));	/* Now we're in kernel-mode.  */
-2:	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
-	/* Save away the syscall number.  */
-	swi	r0, r1, PTO+PT_R0;
+	lwi	CURRENT_TASK, r0, TOPHYS(PER_CPU(CURRENT_SAVE));
 	tovirt(r1,r1)
-
-	addi	r5, r0, SIGTRAP		     /* send the trap signal */
-	add	r6, r0, CURRENT_TASK; /* Get current task ptr into r11 */
-	addk	r7, r0, r0		     /* 3rd param zero */
-
 	set_vms;
-	la	r11, r0, send_sig;
-	la	r15, r0, dbtrap_call;
-dbtrap_call:	rtbd	r11, 0;
-	nop;
+	addik	r5, r1, PTO;
+	addik	r15, r0, dbtrap_call;
+dbtrap_call: /* Return point for kernel/user entry + 8 because of rtsd r15, 8 */
+	rtbd	r0, sw_exception
+	nop
 
-	set_bip;			/*  Ints masked for state restore*/
-	lwi	r11, r1, PTO+PT_MODE;
+	/* MS: The first instruction for the second part of the gdb/kgdb */
+	set_bip; /* Ints masked for state restore */
+	lwi	r11, r1, PTO + PT_MODE;
 	bnei	r11, 2f;
-
+/* MS: Return to user space - gdb */
 	/* Get current task ptr into r11 */
 	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
 	lwi	r11, r11, TI_FLAGS;	/* get flags in thread info */
 	andi	r11, r11, _TIF_NEED_RESCHED;
 	beqi	r11, 5f;
 
-/* Call the scheduler before returning from a syscall/trap. */
-
+	/* Call the scheduler before returning from a syscall/trap. */
 	bralid	r15, schedule;	/* Call scheduler */
 	nop;				/* delay slot */
-	/* XXX Is PT_DTRACE handling needed here? */
-	/* XXX m68knommu also checks TASK_STATE & TASK_COUNTER here.  */
 
 	/* Maybe handle a signal */
 5:	lwi	r11, CURRENT_TASK, TS_THREAD_INFO;	/* get thread info */
@@ -955,54 +837,40 @@ dbtrap_call:	rtbd	r11, 0;
 	andi	r11, r11, _TIF_SIGPENDING;
 	beqi	r11, 1f;		/* Signals to handle, handle them */
 
-/* Handle a signal return; Pending signals should be in r18.  */
-	/* Not all registers are saved by the normal trap/interrupt entry
-	   points (for instance, call-saved registers (because the normal
-	   C-compiler calling sequence in the kernel makes sure they're
-	   preserved), and call-clobbered registers in the case of
-	   traps), but signal handlers may want to examine or change the
-	   complete register state.  Here we save anything not saved by
-	   the normal entry sequence, so that it may be safely restored
-	   (in a possibly modified form) after do_signal returns.  */
-
-	la	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
+	addik	r5, r1, PTO;		/* Arg 1: struct pt_regs *regs */
 	addi  r7, r0, 0;	/* Arg 3: int in_syscall */
 	bralid	r15, do_signal;	/* Handle any signals */
 	add	r6, r0, r0;		/* Arg 2: sigset_t *oldset */
 
-
 /* Finally, return to user state.  */
-1:	swi	r0, r0, PER_CPU(KM);	/* Now officially in user state. */
-	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
+1:	swi	CURRENT_TASK, r0, PER_CPU(CURRENT_SAVE); /* save current */
 	VM_OFF;
 	tophys(r1,r1);
-
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
+	/* MS: Restore all regs */
 	RESTORE_REGS
-	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
-
-
-	lwi	r1, r1, PT_R1 - PT_SIZE;
-					/* Restore user stack pointer. */
-	bri	6f;
+	lwi	r17, r1, PTO+PT_R17;
+	lwi	r16, r1, PTO+PT_R16;
+	addik	r1, r1, STATE_SAVE_SIZE	 /* Clean up stack space */
+	lwi	r1, r1, PT_R1 - PT_SIZE; /* Restore user stack pointer */
+DBTRAP_return_user: /* MS: Make global symbol for debugging */
+	rtbd	r16, 0; /* MS: Instructions to return from a debug trap */
+	nop;
 
-/* Return to kernel state.  */
+/* MS: Return to kernel state - kgdb */
 2:	VM_OFF;
 	tophys(r1,r1);
-	lwi	r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */
-	lwi	r4, r1, PTO+PT_R4;
+	/* MS: Restore all regs */
 	RESTORE_REGS
-	addik	r1, r1, STATE_SAVE_SIZE		/* Clean up stack space.  */
-
+	lwi	r14, r1, PTO+PT_R14;
+	lwi	r16, r1, PTO+PT_PC;
+	lwi	r17, r1, PTO+PT_R17;
+	addik	r1, r1, STATE_SAVE_SIZE; /* MS: Clean up stack space */
 	tovirt(r1,r1);
-6:
-DBTRAP_return:		/* Make global symbol for debugging */
-	rtbd	r14, 0;	/* Instructions to return from an IRQ */
+DBTRAP_return_kernel: /* MS: Make global symbol for debugging */
+	rtbd	r16, 0; /* MS: Instructions to return from a debug trap */
 	nop;
 
 
-
 ENTRY(_switch_to)
 	/* prepare return value */
 	addk	r3, r0, CURRENT_TASK
@@ -1037,16 +905,12 @@ ENTRY(_switch_to)
 	swi	r30, r11, CC_R30
 	/* special purpose registers */
 	mfs	r12, rmsr
-	nop
 	swi	r12, r11, CC_MSR
 	mfs	r12, rear
-	nop
 	swi	r12, r11, CC_EAR
 	mfs	r12, resr
-	nop
 	swi	r12, r11, CC_ESR
 	mfs	r12, rfsr
-	nop
 	swi	r12, r11, CC_FSR
 
 	/* update r31, the current-give me pointer to task which will be next */
@@ -1085,10 +949,8 @@ ENTRY(_switch_to)
 	/* special purpose registers */
 	lwi	r12, r11, CC_FSR
 	mts	rfsr, r12
-	nop
 	lwi	r12, r11, CC_MSR
 	mts	rmsr, r12
-	nop
 
 	rtsd	r15, 8
 	nop
@@ -1096,15 +958,6 @@ ENTRY(_switch_to)
 ENTRY(_reset)
 	brai	0x70; /* Jump back to FS-boot */
 
-ENTRY(_break)
-	mfs	r5, rmsr
-	nop
-	swi	r5, r0, 0x250 + TOPHYS(r0_ram)
-	mfs	r5, resr
-	nop
-	swi	r5, r0, 0x254 + TOPHYS(r0_ram)
-	bri	0
-
 	/* These are compiled and loaded into high memory, then
 	 * copied into place in mach_early_setup */
 	.section	.init.ivt, "ax"
@@ -1116,14 +969,38 @@ ENTRY(_break)
 	nop
 	brai	TOPHYS(_user_exception); /* syscall handler */
 	brai	TOPHYS(_interrupt);	/* Interrupt handler */
-	brai	TOPHYS(_break);		/* nmi trap handler */
+	brai	TOPHYS(_debug_exception);	/* debug trap handler */
 	brai	TOPHYS(_hw_exception_handler);	/* HW exception handler */
 
-	.org	0x60
-	brai	TOPHYS(_debug_exception);	/* debug trap handler*/
-
 .section .rodata,"a"
 #include "syscall_table.S"
 
 syscall_table_size=(.-sys_call_table)
 
+type_SYSCALL:
+	.ascii "SYSCALL\0"
+type_IRQ:
+	.ascii "IRQ\0"
+type_IRQ_PREEMPT:
+	.ascii "IRQ (PREEMPTED)\0"
+type_SYSCALL_PREEMPT:
+	.ascii " SYSCALL (PREEMPTED)\0"
+
+	/*
+	 * Trap decoding for stack unwinder
+	 * Tuples are (start addr, end addr, string)
+	 * If return address lies on [start addr, end addr],
+	 * unwinder displays 'string'
+	 */
+
+	.align 4
+.global microblaze_trap_handlers
+microblaze_trap_handlers:
+	/* Exact matches come first */
+	.word ret_from_trap; .word ret_from_trap   ; .word type_SYSCALL
+	.word ret_from_irq ; .word ret_from_irq    ; .word type_IRQ
+	/* Fuzzy matches go here */
+	.word ret_from_irq ; .word no_intr_resched ; .word type_IRQ_PREEMPT
+	.word ret_from_trap; .word TRAP_return     ; .word type_SYSCALL_PREEMPT
+	/* End of table */
+	.word 0               ; .word 0               ; .word 0
diff --git a/arch/microblaze/kernel/exceptions.c b/arch/microblaze/kernel/exceptions.c
index 02cbdfe5aa8..b98ee8d0c1c 100644
--- a/arch/microblaze/kernel/exceptions.c
+++ b/arch/microblaze/kernel/exceptions.c
@@ -48,12 +48,17 @@ void die(const char *str, struct pt_regs *fp, long err)
 	do_exit(err);
 }
 
+/* for user application debugging */
+void sw_exception(struct pt_regs *regs)
+{
+	_exception(SIGTRAP, regs, TRAP_BRKPT, regs->r16);
+}
+
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
 {
 	siginfo_t info;
 
 	if (kernel_mode(regs)) {
-		debugger(regs);
 		die("Exception in kernel mode", regs, signr);
 	}
 	info.si_signo = signr;
@@ -143,7 +148,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 #ifdef CONFIG_MMU
 	case MICROBLAZE_PRIVILEGED_EXCEPTION:
 		pr_debug(KERN_WARNING "Privileged exception\n");
-		/* "brk r0,r0" - used as debug breakpoint */
+		/* "brk r0,r0" - used as debug breakpoint - old toolchain */
 		if (get_user(code, (unsigned long *)regs->pc) == 0
 			&& code == 0x980c0000) {
 			_exception(SIGTRAP, regs, TRAP_BRKPT, addr);
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 1bf73988826..42434008209 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -43,10 +43,10 @@
 .global empty_zero_page
 .align 12
 empty_zero_page:
-	.space	4096
+	.space	PAGE_SIZE
 .global swapper_pg_dir
 swapper_pg_dir:
-	.space	4096
+	.space	PAGE_SIZE
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 995a2123635..781195438ee 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -78,9 +78,6 @@
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
-#ifndef CONFIG_MMU
-#define EX_HANDLER_STACK_SIZ	(4*19)
-#endif
 #define NUM_TO_REG(num)		r ## num
 
 #ifdef CONFIG_MMU
@@ -988,6 +985,7 @@ ex_unaligned_fixup:
 .end _unaligned_data_exception
 #endif /* CONFIG_MMU */
 
+.global ex_handler_unhandled
 ex_handler_unhandled:
 /* FIXME add handle function for unhandled exception - dump register */
 	bri 0
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 8f120aca123..a9345fb4906 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -17,26 +17,17 @@
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
 #include <linux/irq.h>
+#include <linux/of_irq.h>
 
 #include <asm/prom.h>
 
-unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
-{
-	struct of_irq oirq;
-
-	if (of_irq_map_one(dev, index, &oirq))
-		return NO_IRQ;
-
-	return oirq.specifier[0];
-}
-EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-
 static u32 concurrent_irq;
 
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	unsigned int irq;
 	struct pt_regs *old_regs = set_irq_regs(regs);
+	trace_hardirqs_off();
 
 	irq_enter();
 	irq = get_irq(regs);
@@ -53,6 +44,7 @@ next_irq:
 
 	irq_exit();
 	set_irq_regs(old_regs);
+	trace_hardirqs_on();
 }
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -104,7 +96,7 @@ unsigned int irq_create_mapping(struct irq_host *host, irq_hw_number_t hwirq)
 EXPORT_SYMBOL_GPL(irq_create_mapping);
 
 unsigned int irq_create_of_mapping(struct device_node *controller,
-					u32 *intspec, unsigned int intsize)
+				   const u32 *intspec, unsigned int intsize)
 {
 	return intspec[0];
 }
diff --git a/arch/microblaze/kernel/kgdb.c b/arch/microblaze/kernel/kgdb.c
new file mode 100644
index 00000000000..bfc006b7f2d
--- /dev/null
+++ b/arch/microblaze/kernel/kgdb.c
@@ -0,0 +1,147 @@
+/*
+ * Microblaze KGDB support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/asm-offsets.h>
+#include <asm/pvr.h>
+
+#define GDB_REG		0
+#define GDB_PC		32
+#define GDB_MSR		33
+#define GDB_EAR		34
+#define GDB_ESR		35
+#define GDB_FSR		36
+#define GDB_BTR		37
+#define GDB_PVR		38
+#define GDB_REDR	50
+#define GDB_RPID	51
+#define GDB_RZPR	52
+#define GDB_RTLBX	53
+#define GDB_RTLBSX	54 /* mfs can't read it */
+#define GDB_RTLBLO	55
+#define GDB_RTLBHI	56
+
+/* keep pvr separately because it is unchangeble */
+struct pvr_s pvr;
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	unsigned long *pt_regb = (unsigned long *)regs;
+	int temp;
+	/* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+	for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		gdb_regs[i] = pt_regb[i];
+
+	/* Branch target register can't be changed */
+	__asm__ __volatile__ ("mfs %0, rbtr;" : "=r"(temp) : );
+	gdb_regs[GDB_BTR] = temp;
+
+	/* pvr part  - we have 11 pvr regs */
+	for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+		gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+
+	/* read special registers - can't be changed */
+	__asm__ __volatile__ ("mfs %0, redr;" : "=r"(temp) : );
+	gdb_regs[GDB_REDR] = temp;
+	__asm__ __volatile__ ("mfs %0, rpid;" : "=r"(temp) : );
+	gdb_regs[GDB_RPID] = temp;
+	__asm__ __volatile__ ("mfs %0, rzpr;" : "=r"(temp) : );
+	gdb_regs[GDB_RZPR] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlbx;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBX] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlblo;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBLO] = temp;
+	__asm__ __volatile__ ("mfs %0, rtlbhi;" : "=r"(temp) : );
+	gdb_regs[GDB_RTLBHI] = temp;
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	unsigned long *pt_regb = (unsigned long *)regs;
+
+	/* pt_regs and gdb_regs have the same 37 values.
+	 * The rest of gdb_regs are unused and can't be changed.
+	 * r0 register value can't be changed too. */
+	for (i = 1; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		pt_regb[i] = gdb_regs[i];
+}
+
+void microblaze_kgdb_break(struct pt_regs *regs)
+{
+	if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
+		return 0;
+
+	/* Jump over the first arch_kgdb_breakpoint which is barrier to
+	 * get kgdb work. The same solution is used for powerpc */
+	if (*(u32 *) (regs->pc) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->pc += BREAK_INSTR_SIZE;
+}
+
+/* untested */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int i;
+	unsigned long *pt_regb = (unsigned long *)(p->thread.regs);
+
+	/* registers r0 - r31, pc, msr, ear, esr, fsr + do not save pt_mode */
+	for (i = 0; i < (sizeof(struct pt_regs) / 4) - 1; i++)
+		gdb_regs[i] = pt_regb[i];
+
+	/* pvr part  - we have 11 pvr regs */
+	for (i = 0; i < sizeof(struct pvr_s)/4; i++)
+		gdb_regs[GDB_PVR + i] = pvr.pvr[i];
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->pc = ip;
+}
+
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->pc = address;
+
+		return 0;
+	}
+	return -1; /* this means that we do not want to exit from the handler */
+}
+
+int kgdb_arch_init(void)
+{
+	get_pvr(&pvr); /* Fill PVR structure */
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	/* Nothing to do */
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0xba, 0x0c, 0x00, 0x18}, /* brki r16, 0x18 */
+};
diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S
index 0fb5fc6c1fc..206da3da361 100644
--- a/arch/microblaze/kernel/misc.S
+++ b/arch/microblaze/kernel/misc.S
@@ -76,7 +76,7 @@ early_console_reg_tlb_alloc:
 	 * the UARTs nice and early.  We use a 4k real==virtual mapping.
 	 */
 	ori	r4, r0, MICROBLAZE_TLB_SIZE - 1
-	mts	rtlbx, r4 /* TLB slot 2 */
+	mts	rtlbx, r4 /* TLB slot 63 */
 
 	or	r4,r5,r0
 	andi	r4,r4,0xfffff000
diff --git a/arch/microblaze/kernel/of_device.c b/arch/microblaze/kernel/of_device.c
deleted file mode 100644
index b372787886e..00000000000
--- a/arch/microblaze/kernel/of_device.c
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
-
-#include <linux/errno.h>
-
-void of_device_make_bus_id(struct of_device *dev)
-{
-	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->dev.of_node;
-	const u32 *reg;
-	u64 addr;
-	int magic;
-
-	/*
-	 * For MMIO, get the physical address
-	 */
-	reg = of_get_property(node, "reg", NULL);
-	if (reg) {
-		addr = of_translate_address(node, reg);
-		if (addr != OF_BAD_ADDR) {
-			dev_set_name(&dev->dev, "%llx.%s",
-				     (unsigned long long)addr, node->name);
-			return;
-		}
-	}
-
-	/*
-	 * No BusID, use the node name and add a globally incremented
-	 * counter (and pray...)
-	 */
-	magic = atomic_add_return(1, &bus_no_reg_magic);
-	dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
-}
-EXPORT_SYMBOL(of_device_make_bus_id);
-
-struct of_device *of_device_alloc(struct device_node *np,
-				  const char *bus_id,
-				  struct device *parent)
-{
-	struct of_device *dev;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return NULL;
-
-	dev->dev.of_node = of_node_get(np);
-	dev->dev.dma_mask = &dev->archdata.dma_mask;
-	dev->dev.parent = parent;
-	dev->dev.release = of_release_dev;
-
-	if (bus_id)
-		dev_set_name(&dev->dev, bus_id);
-	else
-		of_device_make_bus_id(dev);
-
-	return dev;
-}
-EXPORT_SYMBOL(of_device_alloc);
-
-int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct of_device *ofdev;
-	const char *compat;
-	int seen = 0, cplen, sl;
-
-	if (!dev)
-		return -ENODEV;
-
-	ofdev = to_of_device(dev);
-
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
-		return -ENOMEM;
-
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
-		return -ENOMEM;
-
-	/* Since the compatible field can contain pretty much anything
-	 * it's not really legal to split it out with commas. We split it
-	 * up using a number of environment variables instead. */
-
-	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
-	while (compat && *compat && cplen > 0) {
-		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
-			return -ENOMEM;
-
-		sl = strlen(compat) + 1;
-		compat += sl;
-		cplen -= sl;
-		seen++;
-	}
-
-	if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
-		return -ENOMEM;
-
-	/* modalias is trickier, we add it in 2 steps */
-	if (add_uevent_var(env, "MODALIAS="))
-		return -ENOMEM;
-	sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1],
-				    sizeof(env->buf) - env->buflen);
-	if (sl >= (sizeof(env->buf) - env->buflen))
-		return -ENOMEM;
-	env->buflen += sl;
-
-	return 0;
-}
-EXPORT_SYMBOL(of_device_uevent);
diff --git a/arch/microblaze/kernel/of_platform.c b/arch/microblaze/kernel/of_platform.c
deleted file mode 100644
index ccf6f4257f4..00000000000
--- a/arch/microblaze/kernel/of_platform.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    and		 Arnd Bergmann, IBM Corp.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#undef DEBUG
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/pci.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-
-#include <linux/errno.h>
-#include <linux/topology.h>
-#include <asm/atomic.h>
-
-struct bus_type of_platform_bus_type = {
-       .uevent	= of_device_uevent,
-};
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static int __init of_bus_driver_init(void)
-{
-	return of_bus_type_init(&of_platform_bus_type, "of_platform");
-}
-postcore_initcall(of_bus_driver_init);
-
-struct of_device *of_platform_device_create(struct device_node *np,
-					    const char *bus_id,
-					    struct device *parent)
-{
-	struct of_device *dev;
-
-	dev = of_device_alloc(np, bus_id, parent);
-	if (!dev)
-		return NULL;
-
-	dev->archdata.dma_mask = 0xffffffffUL;
-	dev->dev.bus = &of_platform_bus_type;
-
-	/* We do not fill the DMA ops for platform devices by default.
-	 * This is currently the responsibility of the platform code
-	 * to do such, possibly using a device notifier
-	 */
-
-	if (of_device_register(dev) != 0) {
-		of_device_free(dev);
-		return NULL;
-	}
-
-	return dev;
-}
-EXPORT_SYMBOL(of_platform_device_create);
-
-/**
- * of_platform_bus_create - Create an OF device for a bus node and all its
- * children. Optionally recursively instanciate matching busses.
- * @bus: device node of the bus to instanciate
- * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
- * disallow recursive creation of child busses
- */
-static int of_platform_bus_create(const struct device_node *bus,
-				  const struct of_device_id *matches,
-				  struct device *parent)
-{
-	struct device_node *child;
-	struct of_device *dev;
-	int rc = 0;
-
-	for_each_child_of_node(bus, child) {
-		pr_debug("   create child: %s\n", child->full_name);
-		dev = of_platform_device_create(child, NULL, parent);
-		if (dev == NULL)
-			rc = -ENOMEM;
-		else if (!of_match_node(matches, child))
-			continue;
-		if (rc == 0) {
-			pr_debug("   and sub busses\n");
-			rc = of_platform_bus_create(child, matches, &dev->dev);
-		}
-		if (rc) {
-			of_node_put(child);
-			break;
-		}
-	}
-	return rc;
-}
-
-
-/**
- * of_platform_bus_probe - Probe the device-tree for platform busses
- * @root: parent of the first level to probe or NULL for the root of the tree
- * @matches: match table, NULL to use the default
- * @parent: parent to hook devices from, NULL for toplevel
- *
- * Note that children of the provided root are not instanciated as devices
- * unless the specified root itself matches the bus list and is not NULL.
- */
-
-int of_platform_bus_probe(struct device_node *root,
-			  const struct of_device_id *matches,
-			  struct device *parent)
-{
-	struct device_node *child;
-	struct of_device *dev;
-	int rc = 0;
-
-	if (matches == NULL)
-		matches = of_default_bus_ids;
-	if (matches == OF_NO_DEEP_PROBE)
-		return -EINVAL;
-	if (root == NULL)
-		root = of_find_node_by_path("/");
-	else
-		of_node_get(root);
-
-	pr_debug("of_platform_bus_probe()\n");
-	pr_debug(" starting at: %s\n", root->full_name);
-
-	/* Do a self check of bus type, if there's a match, create
-	 * children
-	 */
-	if (of_match_node(matches, root)) {
-		pr_debug(" root match, create all sub devices\n");
-		dev = of_platform_device_create(root, NULL, parent);
-		if (dev == NULL) {
-			rc = -ENOMEM;
-			goto bail;
-		}
-		pr_debug(" create all sub busses\n");
-		rc = of_platform_bus_create(root, matches, &dev->dev);
-		goto bail;
-	}
-	for_each_child_of_node(root, child) {
-		if (!of_match_node(matches, child))
-			continue;
-
-		pr_debug("  match: %s\n", child->full_name);
-		dev = of_platform_device_create(child, NULL, parent);
-		if (dev == NULL)
-			rc = -ENOMEM;
-		else
-			rc = of_platform_bus_create(child, matches, &dev->dev);
-		if (rc) {
-			of_node_put(child);
-			break;
-		}
-	}
- bail:
-	of_node_put(root);
-	return rc;
-}
-EXPORT_SYMBOL(of_platform_bus_probe);
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
-	return to_of_device(dev)->dev.of_node == data;
-}
-
-struct of_device *of_find_device_by_node(struct device_node *np)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&of_platform_bus_type,
-			      NULL, np, of_dev_node_match);
-	if (dev)
-		return to_of_device(dev);
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-static int of_dev_phandle_match(struct device *dev, void *data)
-{
-	phandle *ph = data;
-	return to_of_device(dev)->dev.of_node->phandle == *ph;
-}
-
-struct of_device *of_find_device_by_phandle(phandle ph)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&of_platform_bus_type,
-			      NULL, &ph, of_dev_phandle_match);
-	if (dev)
-		return to_of_device(dev);
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_phandle);
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 09bed44dfcd..ba7c4b16ed3 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -76,8 +76,11 @@ __setup("hlt", hlt_setup);
 void default_idle(void)
 {
 	if (likely(hlt_counter)) {
-		while (!need_resched())
-			cpu_relax();
+		local_irq_disable();
+		stop_critical_timings();
+		cpu_relax();
+		start_critical_timings();
+		local_irq_enable();
 	} else {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
 		smp_mb__after_clear_bit();
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index bf7e6c27e31..d33ba17601f 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -6,219 +6,11 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
+#include <linux/of_address.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
-#define PRu64	"%llx"
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-#define OF_CHECK_COUNTS(na, ns)	((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
-			(ns) > 0)
-
-static struct of_bus *of_match_bus(struct device_node *np);
-static int __of_address_to_resource(struct device_node *dev,
-		const u32 *addrp, u64 size, unsigned int flags,
-		struct resource *r);
-
-/* Debug utility */
-#ifdef DEBUG
-static void of_dump_addr(const char *s, const u32 *addr, int na)
-{
-	printk(KERN_INFO "%s", s);
-	while (na--)
-		printk(KERN_INFO " %08x", *(addr++));
-	printk(KERN_INFO "\n");
-}
-#else
-static void of_dump_addr(const char *s, const u32 *addr, int na) { }
-#endif
-
-/* Callbacks for bus specific translators */
-struct of_bus {
-	const char	*name;
-	const char	*addresses;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-					int *addrc, int *sizec);
-	u64		(*map)(u32 *addr, const u32 *range,
-				int na, int ns, int pna);
-	int		(*translate)(u32 *addr, u64 offset, int na);
-	unsigned int	(*get_flags)(const u32 *addr);
-};
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-					int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dev);
-	if (sizec)
-		*sizec = of_n_size_cells(dev);
-}
-
-static u64 of_bus_default_map(u32 *addr, const u32 *range,
-		int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	cp = of_read_number(range, na);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr, na);
-
-	pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
-		cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
-{
-	u64 a = of_read_number(addr, na);
-	memset(addr, 0, na * 4);
-	a += offset;
-	if (na > 1)
-		addr[na - 2] = a >> 32;
-	addr[na - 1] = a & 0xffffffffu;
-
-	return 0;
-}
-
-static unsigned int of_bus_default_get_flags(const u32 *addr)
-{
-	return IORESOURCE_MEM;
-}
-
 #ifdef CONFIG_PCI
-/*
- * PCI bus specific translator
- */
-
-static int of_bus_pci_match(struct device_node *np)
-{
-	/* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
-	return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
-}
-
-static void of_bus_pci_count_cells(struct device_node *np,
-				int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 3;
-	if (sizec)
-		*sizec = 2;
-}
-
-static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x03000000)
-		return OF_BAD_ADDR;
-
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch ((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
-const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
-			unsigned int *flags)
-{
-	const u32 *prop;
-	unsigned int psize;
-	struct device_node *parent;
-	struct of_bus *bus;
-	int onesize, i, na, ns;
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		return NULL;
-	bus = of_match_bus(parent);
-	if (strcmp(bus->name, "pci")) {
-		of_node_put(parent);
-		return NULL;
-	}
-	bus->count_cells(dev, &na, &ns);
-	of_node_put(parent);
-	if (!OF_CHECK_COUNTS(na, ns))
-		return NULL;
-
-	/* Get "reg" or "assigned-addresses" property */
-	prop = of_get_property(dev, bus->addresses, &psize);
-	if (prop == NULL)
-		return NULL;
-	psize /= 4;
-
-	onesize = na + ns;
-	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
-		if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
-			if (size)
-				*size = of_read_number(prop + na, ns);
-			if (flags)
-				*flags = bus->get_flags(prop);
-			return prop;
-		}
-	return NULL;
-}
-EXPORT_SYMBOL(of_get_pci_address);
-
-int of_pci_address_to_resource(struct device_node *dev, int bar,
-				struct resource *r)
-{
-	const u32	*addrp;
-	u64		size;
-	unsigned int	flags;
-
-	addrp = of_get_pci_address(dev, bar, &size, &flags);
-	if (addrp == NULL)
-		return -EINVAL;
-	return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
-
-static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
-{
-	return (((pin - 1) + slot) % 4) + 1;
-}
-
 int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
@@ -293,331 +85,6 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 EXPORT_SYMBOL_GPL(of_irq_map_pci);
 #endif /* CONFIG_PCI */
 
-/*
- * ISA bus specific translator
- */
-
-static int of_bus_isa_match(struct device_node *np)
-{
-	return !strcmp(np->name, "isa");
-}
-
-static void of_bus_isa_count_cells(struct device_node *child,
-				int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x00000001)
-		return OF_BAD_ADDR;
-
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_isa_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	if (w & 1)
-		flags |= IORESOURCE_IO;
-	else
-		flags |= IORESOURCE_MEM;
-	return flags;
-}
-
-/*
- * Array of bus specific translators
- */
-
-static struct of_bus of_busses[] = {
-#ifdef CONFIG_PCI
-	/* PCI */
-	{
-		.name = "pci",
-		.addresses = "assigned-addresses",
-		.match = of_bus_pci_match,
-		.count_cells = of_bus_pci_count_cells,
-		.map = of_bus_pci_map,
-		.translate = of_bus_pci_translate,
-		.get_flags = of_bus_pci_get_flags,
-	},
-#endif /* CONFIG_PCI */
-	/* ISA */
-	{
-		.name = "isa",
-		.addresses = "reg",
-		.match = of_bus_isa_match,
-		.count_cells = of_bus_isa_count_cells,
-		.map = of_bus_isa_map,
-		.translate = of_bus_isa_translate,
-		.get_flags = of_bus_isa_get_flags,
-	},
-	/* Default */
-	{
-		.name = "default",
-		.addresses = "reg",
-		.match = NULL,
-		.count_cells = of_bus_default_count_cells,
-		.map = of_bus_default_map,
-		.translate = of_bus_default_translate,
-		.get_flags = of_bus_default_get_flags,
-	},
-};
-
-static struct of_bus *of_match_bus(struct device_node *np)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(of_busses); i++)
-		if (!of_busses[i].match || of_busses[i].match(np))
-			return &of_busses[i];
-	BUG();
-	return NULL;
-}
-
-static int of_translate_one(struct device_node *parent, struct of_bus *bus,
-			struct of_bus *pbus, u32 *addr,
-			int na, int ns, int pna)
-{
-	const u32 *ranges;
-	unsigned int rlen;
-	int rone;
-	u64 offset = OF_BAD_ADDR;
-
-	/* Normally, an absence of a "ranges" property means we are
-	 * crossing a non-translatable boundary, and thus the addresses
-	 * below the current not cannot be converted to CPU physical ones.
-	 * Unfortunately, while this is very clear in the spec, it's not
-	 * what Apple understood, and they do have things like /uni-n or
-	 * /ht nodes with no "ranges" property and a lot of perfectly
-	 * useable mapped devices below them. Thus we treat the absence of
-	 * "ranges" as equivalent to an empty "ranges" property which means
-	 * a 1:1 translation at that level. It's up to the caller not to try
-	 * to translate addresses that aren't supposed to be translated in
-	 * the first place. --BenH.
-	 */
-	ranges = of_get_property(parent, "ranges", (int *) &rlen);
-	if (ranges == NULL || rlen == 0) {
-		offset = of_read_number(addr, na);
-		memset(addr, 0, pna * 4);
-		pr_debug("OF: no ranges, 1:1 translation\n");
-		goto finish;
-	}
-
-	pr_debug("OF: walking ranges...\n");
-
-	/* Now walk through the ranges */
-	rlen /= 4;
-	rone = na + pna + ns;
-	for (; rlen >= rone; rlen -= rone, ranges += rone) {
-		offset = bus->map(addr, ranges, na, ns, pna);
-		if (offset != OF_BAD_ADDR)
-			break;
-	}
-	if (offset == OF_BAD_ADDR) {
-		pr_debug("OF: not found !\n");
-		return 1;
-	}
-	memcpy(addr, ranges + na, 4 * pna);
-
- finish:
-	of_dump_addr("OF: parent translation for:", addr, pna);
-	pr_debug("OF: with offset: "PRu64"\n", offset);
-
-	/* Translate it into parent bus space */
-	return pbus->translate(addr, offset, pna);
-}
-
-/*
- * Translate an address from the device-tree into a CPU physical address,
- * this walks up the tree and applies the various bus mappings on the
- * way.
- *
- * Note: We consider that crossing any level with #size-cells == 0 to mean
- * that translation is impossible (that is we are not dealing with a value
- * that can be mapped to a cpu physical address). This is not really specified
- * that way, but this is traditionally the way IBM at least do things
- */
-u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
-{
-	struct device_node *parent = NULL;
-	struct of_bus *bus, *pbus;
-	u32 addr[OF_MAX_ADDR_CELLS];
-	int na, ns, pna, pns;
-	u64 result = OF_BAD_ADDR;
-
-	pr_debug("OF: ** translation for device %s **\n", dev->full_name);
-
-	/* Increase refcount at current level */
-	of_node_get(dev);
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		goto bail;
-	bus = of_match_bus(parent);
-
-	/* Cound address cells & copy address locally */
-	bus->count_cells(dev, &na, &ns);
-	if (!OF_CHECK_COUNTS(na, ns)) {
-		printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
-			dev->full_name);
-		goto bail;
-	}
-	memcpy(addr, in_addr, na * 4);
-
-	pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
-		bus->name, na, ns, parent->full_name);
-	of_dump_addr("OF: translating address:", addr, na);
-
-	/* Translate */
-	for (;;) {
-		/* Switch to parent bus */
-		of_node_put(dev);
-		dev = parent;
-		parent = of_get_parent(dev);
-
-		/* If root, we have finished */
-		if (parent == NULL) {
-			pr_debug("OF: reached root node\n");
-			result = of_read_number(addr, na);
-			break;
-		}
-
-		/* Get new parent bus and counts */
-		pbus = of_match_bus(parent);
-		pbus->count_cells(dev, &pna, &pns);
-		if (!OF_CHECK_COUNTS(pna, pns)) {
-			printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
-				dev->full_name);
-			break;
-		}
-
-		pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
-			pbus->name, pna, pns, parent->full_name);
-
-		/* Apply bus translation */
-		if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
-			break;
-
-		/* Complete the move up one level */
-		na = pna;
-		ns = pns;
-		bus = pbus;
-
-		of_dump_addr("OF: one level translation:", addr, na);
-	}
- bail:
-	of_node_put(parent);
-	of_node_put(dev);
-
-	return result;
-}
-EXPORT_SYMBOL(of_translate_address);
-
-const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
-			unsigned int *flags)
-{
-	const u32 *prop;
-	unsigned int psize;
-	struct device_node *parent;
-	struct of_bus *bus;
-	int onesize, i, na, ns;
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		return NULL;
-	bus = of_match_bus(parent);
-	bus->count_cells(dev, &na, &ns);
-	of_node_put(parent);
-	if (!OF_CHECK_COUNTS(na, ns))
-		return NULL;
-
-	/* Get "reg" or "assigned-addresses" property */
-	prop = of_get_property(dev, bus->addresses, (int *) &psize);
-	if (prop == NULL)
-		return NULL;
-	psize /= 4;
-
-	onesize = na + ns;
-	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
-		if (i == index) {
-			if (size)
-				*size = of_read_number(prop + na, ns);
-			if (flags)
-				*flags = bus->get_flags(prop);
-			return prop;
-		}
-	return NULL;
-}
-EXPORT_SYMBOL(of_get_address);
-
-static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
-				u64 size, unsigned int flags,
-				struct resource *r)
-{
-	u64 taddr;
-
-	if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
-		return -EINVAL;
-	taddr = of_translate_address(dev, addrp);
-	if (taddr == OF_BAD_ADDR)
-		return -EINVAL;
-	memset(r, 0, sizeof(struct resource));
-	if (flags & IORESOURCE_IO) {
-		unsigned long port;
-		port = -1; /* pci_address_to_pio(taddr); */
-		if (port == (unsigned long)-1)
-			return -EINVAL;
-		r->start = port;
-		r->end = port + size - 1;
-	} else {
-		r->start = taddr;
-		r->end = taddr + size - 1;
-	}
-	r->flags = flags;
-	r->name = dev->name;
-	return 0;
-}
-
-int of_address_to_resource(struct device_node *dev, int index,
-			struct resource *r)
-{
-	const u32	*addrp;
-	u64		size;
-	unsigned int	flags;
-
-	addrp = of_get_address(dev, index, &size, &flags);
-	if (addrp == NULL)
-		return -EINVAL;
-	return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_address_to_resource);
-
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
 {
@@ -644,308 +111,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 	*size = of_read_number(dma_window, cells);
 }
 
-/*
- * Interrupt remapper
- */
-
-static unsigned int of_irq_workarounds;
-static struct device_node *of_irq_dflt_pic;
-
-static struct device_node *of_irq_find_parent(struct device_node *child)
-{
-	struct device_node *p;
-	const phandle *parp;
-
-	if (!of_node_get(child))
-		return NULL;
-
-	do {
-		parp = of_get_property(child, "interrupt-parent", NULL);
-		if (parp == NULL)
-			p = of_get_parent(child);
-		else {
-			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
-				p = of_node_get(of_irq_dflt_pic);
-			else
-				p = of_find_node_by_phandle(*parp);
-		}
-		of_node_put(child);
-		child = p;
-	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
-
-	return p;
-}
-
-/* This doesn't need to be called if you don't have any special workaround
- * flags to pass
- */
-void of_irq_map_init(unsigned int flags)
-{
-	of_irq_workarounds = flags;
-
-	/* OldWorld, don't bother looking at other things */
-	if (flags & OF_IMAP_OLDWORLD_MAC)
-		return;
-
-	/* If we don't have phandles, let's try to locate a default interrupt
-	 * controller (happens when booting with BootX). We do a first match
-	 * here, hopefully, that only ever happens on machines with one
-	 * controller.
-	 */
-	if (flags & OF_IMAP_NO_PHANDLE) {
-		struct device_node *np;
-
-		for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
-			if (of_get_property(np, "interrupt-controller", NULL)
-				== NULL)
-				continue;
-			/* Skip /chosen/interrupt-controller */
-			if (strcmp(np->name, "chosen") == 0)
-				continue;
-			/* It seems like at least one person on this planet
-			 * wants to use BootX on a machine with an AppleKiwi
-			 * controller which happens to pretend to be an
-			 * interrupt controller too.
-			 */
-			if (strcmp(np->name, "AppleKiwi") == 0)
-				continue;
-			/* I think we found one ! */
-			of_irq_dflt_pic = np;
-			break;
-		}
-	}
-
-}
-
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
-		const u32 *addr, struct of_irq *out_irq)
-{
-	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
-	const u32 *tmp, *imap, *imask;
-	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
-	int imaplen, match, i;
-
-	pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
-		"ointsize=%d\n",
-		parent->full_name, intspec[0], intspec[1], ointsize);
-
-	ipar = of_node_get(parent);
-
-	/* First get the #interrupt-cells property of the current cursor
-	 * that tells us how to interpret the passed-in intspec. If there
-	 * is none, we are nice and just walk up the tree
-	 */
-	do {
-		tmp = of_get_property(ipar, "#interrupt-cells", NULL);
-		if (tmp != NULL) {
-			intsize = *tmp;
-			break;
-		}
-		tnode = ipar;
-		ipar = of_irq_find_parent(ipar);
-		of_node_put(tnode);
-	} while (ipar);
-	if (ipar == NULL) {
-		pr_debug(" -> no parent found !\n");
-		goto fail;
-	}
-
-	pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
-			ipar->full_name, intsize);
-
-	if (ointsize != intsize)
-		return -EINVAL;
-
-	/* Look for this #address-cells. We have to implement the old linux
-	 * trick of looking for the parent here as some device-trees rely on it
-	 */
-	old = of_node_get(ipar);
-	do {
-		tmp = of_get_property(old, "#address-cells", NULL);
-		tnode = of_get_parent(old);
-		of_node_put(old);
-		old = tnode;
-	} while (old && tmp == NULL);
-	of_node_put(old);
-	old = NULL;
-	addrsize = (tmp == NULL) ? 2 : *tmp;
-
-	pr_debug(" -> addrsize=%d\n", addrsize);
-
-	/* Now start the actual "proper" walk of the interrupt tree */
-	while (ipar != NULL) {
-		/* Now check if cursor is an interrupt-controller and if it is
-		 * then we are done
-		 */
-		if (of_get_property(ipar, "interrupt-controller", NULL) !=
-				NULL) {
-			pr_debug(" -> got it !\n");
-			memcpy(out_irq->specifier, intspec,
-				intsize * sizeof(u32));
-			out_irq->size = intsize;
-			out_irq->controller = ipar;
-			of_node_put(old);
-			return 0;
-		}
-
-		/* Now look for an interrupt-map */
-		imap = of_get_property(ipar, "interrupt-map", &imaplen);
-		/* No interrupt map, check for an interrupt parent */
-		if (imap == NULL) {
-			pr_debug(" -> no map, getting parent\n");
-			newpar = of_irq_find_parent(ipar);
-			goto skiplevel;
-		}
-		imaplen /= sizeof(u32);
-
-		/* Look for a mask */
-		imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
-		/* If we were passed no "reg" property and we attempt to parse
-		 * an interrupt-map, then #address-cells must be 0.
-		 * Fail if it's not.
-		 */
-		if (addr == NULL && addrsize != 0) {
-			pr_debug(" -> no reg passed in when needed !\n");
-			goto fail;
-		}
-
-		/* Parse interrupt-map */
-		match = 0;
-		while (imaplen > (addrsize + intsize + 1) && !match) {
-			/* Compare specifiers */
-			match = 1;
-			for (i = 0; i < addrsize && match; ++i) {
-				u32 mask = imask ? imask[i] : 0xffffffffu;
-				match = ((addr[i] ^ imap[i]) & mask) == 0;
-			}
-			for (; i < (addrsize + intsize) && match; ++i) {
-				u32 mask = imask ? imask[i] : 0xffffffffu;
-				match =
-					((intspec[i-addrsize] ^ imap[i])
-						& mask) == 0;
-			}
-			imap += addrsize + intsize;
-			imaplen -= addrsize + intsize;
-
-			pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
-			/* Get the interrupt parent */
-			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
-				newpar = of_node_get(of_irq_dflt_pic);
-			else
-				newpar =
-					of_find_node_by_phandle((phandle)*imap);
-			imap++;
-			--imaplen;
-
-			/* Check if not found */
-			if (newpar == NULL) {
-				pr_debug(" -> imap parent not found !\n");
-				goto fail;
-			}
-
-			/* Get #interrupt-cells and #address-cells of new
-			 * parent
-			 */
-			tmp = of_get_property(newpar, "#interrupt-cells", NULL);
-			if (tmp == NULL) {
-				pr_debug(" -> parent lacks "
-						"#interrupt-cells!\n");
-				goto fail;
-			}
-			newintsize = *tmp;
-			tmp = of_get_property(newpar, "#address-cells", NULL);
-			newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
-			pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
-				newintsize, newaddrsize);
-
-			/* Check for malformed properties */
-			if (imaplen < (newaddrsize + newintsize))
-				goto fail;
-
-			imap += newaddrsize + newintsize;
-			imaplen -= newaddrsize + newintsize;
-
-			pr_debug(" -> imaplen=%d\n", imaplen);
-		}
-		if (!match)
-			goto fail;
-
-		of_node_put(old);
-		old = of_node_get(newpar);
-		addrsize = newaddrsize;
-		intsize = newintsize;
-		intspec = imap - intsize;
-		addr = intspec - addrsize;
-
-skiplevel:
-		/* Iterate again with new parent */
-		pr_debug(" -> new parent: %s\n",
-				newpar ? newpar->full_name : "<>");
-		of_node_put(ipar);
-		ipar = newpar;
-		newpar = NULL;
-	}
-fail:
-	of_node_put(ipar);
-	of_node_put(old);
-	of_node_put(newpar);
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
-int of_irq_map_one(struct device_node *device,
-			int index, struct of_irq *out_irq)
-{
-	struct device_node *p;
-	const u32 *intspec, *tmp, *addr;
-	u32 intsize, intlen;
-	int res;
-
-	pr_debug("of_irq_map_one: dev=%s, index=%d\n",
-			device->full_name, index);
-
-	/* Get the interrupts property */
-	intspec = of_get_property(device, "interrupts", (int *) &intlen);
-	if (intspec == NULL)
-		return -EINVAL;
-	intlen /= sizeof(u32);
-
-	pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
-
-	/* Get the reg property (if any) */
-	addr = of_get_property(device, "reg", NULL);
-
-	/* Look for the interrupt parent. */
-	p = of_irq_find_parent(device);
-	if (p == NULL)
-		return -EINVAL;
-
-	/* Get size of interrupt specifier */
-	tmp = of_get_property(p, "#interrupt-cells", NULL);
-	if (tmp == NULL) {
-		of_node_put(p);
-		return -EINVAL;
-	}
-	intsize = *tmp;
-
-	pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
-
-	/* Check index */
-	if ((index + 1) * intsize > intlen)
-		return -EINVAL;
-
-	/* Get new specifier and map it */
-	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
-				addr, out_irq);
-	of_node_put(p);
-	return res;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_one);
-
 /**
  * Search the device tree for the best MAC address to use.  'mac-address' is
  * checked first, because that is supposed to contain to "most recent" MAC
@@ -983,43 +148,3 @@ const void *of_get_mac_address(struct device_node *np)
 	return NULL;
 }
 EXPORT_SYMBOL(of_get_mac_address);
-
-int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
-{
-	struct of_irq out_irq;
-	int irq;
-	int res;
-
-	res = of_irq_map_one(dev, index, &out_irq);
-
-	/* Get irq for the device */
-	if (res) {
-		pr_debug("IRQ not found... code = %d", res);
-		return NO_IRQ;
-	}
-	/* Assuming single interrupt controller... */
-	irq = out_irq.specifier[0];
-
-	pr_debug("IRQ found = %d", irq);
-
-	/* Only dereference the resource if both the
-	 * resource and the irq are valid. */
-	if (r && irq != NO_IRQ) {
-		r->start = r->end = irq;
-		r->flags = IORESOURCE_IRQ;
-	}
-
-	return irq;
-}
-EXPORT_SYMBOL_GPL(of_irq_to_resource);
-
-void __iomem *of_iomap(struct device_node *np, int index)
-{
-	struct resource res;
-
-	if (of_address_to_resource(np, index, &res))
-		return NULL;
-
-	return ioremap(res.start, 1 + res.end - res.start);
-}
-EXPORT_SYMBOL(of_iomap);
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index a4a7770c614..dc03ffc8174 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -38,6 +38,8 @@
 #include <asm/processor.h>
 #include <linux/uaccess.h>
 #include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
 
 /* Returns the address where the register at REG_OFFS in P is stashed away. */
 static microblaze_reg_t *reg_save_addr(unsigned reg_offs,
@@ -101,8 +103,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			microblaze_reg_t *reg_addr = reg_save_addr(addr, child);
 			if (request == PTRACE_PEEKUSR)
 				val = *reg_addr;
-			else
+			else {
+#if 1
 				*reg_addr = data;
+#else
+				/* MS potential problem on WB system
+				 * Be aware that reg_addr is virtual address
+				 * virt_to_phys conversion is necessary.
+				 * This could be sensible solution.
+				 */
+				u32 paddr = virt_to_phys((u32)reg_addr);
+				invalidate_icache_range(paddr, paddr + 4);
+				*reg_addr = data;
+				flush_dcache_range(paddr, paddr + 4);
+#endif
+			}
 		} else
 			rval = -EIO;
 
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index a1721a33042..bd8ccab5cef 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -24,8 +24,8 @@ static int of_reset_gpio_handle(void)
 	int ret; /* variable which stored handle reset gpio pin */
 	struct device_node *root; /* root node */
 	struct device_node *gpio; /* gpio node */
-	struct of_gpio_chip *of_gc = NULL;
-	enum of_gpio_flags flags ;
+	struct gpio_chip *gc;
+	u32 flags;
 	const void *gpio_spec;
 
 	/* find out root node */
@@ -39,19 +39,19 @@ static int of_reset_gpio_handle(void)
 		goto err0;
 	}
 
-	of_gc = gpio->data;
-	if (!of_gc) {
+	gc = of_node_to_gpiochip(gpio);
+	if (!gc) {
 		pr_debug("%s: gpio controller %s isn't registered\n",
 			 root->full_name, gpio->full_name);
 		ret = -ENODEV;
 		goto err1;
 	}
 
-	ret = of_gc->xlate(of_gc, root, gpio_spec, &flags);
+	ret = gc->of_xlate(gc, root, gpio_spec, &flags);
 	if (ret < 0)
 		goto err1;
 
-	ret += of_gc->gc.base;
+	ret += gc->base;
 err1:
 	of_node_put(gpio);
 err0:
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 17c98dbcec8..f5f76884235 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -213,15 +213,9 @@ static struct notifier_block dflt_plat_bus_notifier = {
 	.priority = INT_MAX,
 };
 
-static struct notifier_block dflt_of_bus_notifier = {
-	.notifier_call = dflt_bus_notify,
-	.priority = INT_MAX,
-};
-
 static int __init setup_bus_notifier(void)
 {
 	bus_register_notifier(&platform_bus_type, &dflt_plat_bus_notifier);
-	bus_register_notifier(&of_platform_bus_type, &dflt_of_bus_notifier);
 
 	return 0;
 }
diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c
index 123692f2264..84bc6686102 100644
--- a/arch/microblaze/kernel/stacktrace.c
+++ b/arch/microblaze/kernel/stacktrace.c
@@ -14,52 +14,18 @@
 #include <linux/thread_info.h>
 #include <linux/ptrace.h>
 #include <linux/module.h>
+#include <asm/unwind.h>
 
-/* FIXME initial support */
 void save_stack_trace(struct stack_trace *trace)
 {
-	unsigned long *sp;
-	unsigned long addr;
-	asm("addik %0, r1, 0" : "=r" (sp));
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (__kernel_text_address(addr)) {
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	/* Exclude our helper functions from the trace*/
+	trace->skip += 2;
+	microblaze_unwind(NULL, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	unsigned int *sp;
-	unsigned long addr;
-
-	struct thread_info *ti = task_thread_info(tsk);
-
-	if (tsk == current)
-		asm("addik %0, r1, 0" : "=r" (sp));
-	else
-		sp = (unsigned int *)ti->cpu_context.r1;
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		if (__kernel_text_address(addr)) {
-			if (trace->skip > 0)
-				trace->skip--;
-			else
-				trace->entries[trace->nr_entries++] = addr;
-
-			if (trace->nr_entries >= trace->max_entries)
-				break;
-		}
-	}
+	microblaze_unwind(tsk, trace);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index ed61b2f1771..b1380ae93ae 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -28,6 +28,7 @@
 #include <asm/prom.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <linux/cnt32_to_63.h>
 
 #ifdef CONFIG_SELFMOD_TIMER
 #include <asm/selfmod.h>
@@ -135,7 +136,7 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device clockevent_microblaze_timer = {
 	.name		= "microblaze_clockevent",
 	.features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 24,
+	.shift		= 8,
 	.rating		= 300,
 	.set_next_event	= microblaze_timer_set_next_event,
 	.set_mode	= microblaze_timer_set_mode,
@@ -195,7 +196,7 @@ static cycle_t microblaze_cc_read(const struct cyclecounter *cc)
 static struct cyclecounter microblaze_cc = {
 	.read = microblaze_cc_read,
 	.mask = CLOCKSOURCE_MASK(32),
-	.shift = 24,
+	.shift = 8,
 };
 
 int __init init_microblaze_timecounter(void)
@@ -213,7 +214,7 @@ static struct clocksource clocksource_microblaze = {
 	.rating		= 300,
 	.read		= microblaze_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 24, /* I can shift it */
+	.shift		= 8, /* I can shift it */
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -235,6 +236,12 @@ static int __init microblaze_clocksource_init(void)
 	return 0;
 }
 
+/*
+ * We have to protect accesses before timer initialization
+ * and return 0 for sched_clock function below.
+ */
+static int timer_initialized;
+
 void __init time_init(void)
 {
 	u32 irq, i = 0;
@@ -289,4 +296,15 @@ void __init time_init(void)
 #endif
 	microblaze_clocksource_init();
 	microblaze_clockevent_init();
+	timer_initialized = 1;
+}
+
+unsigned long long notrace sched_clock(void)
+{
+	if (timer_initialized) {
+		struct clocksource *cs = &clocksource_microblaze;
+		cycle_t cyc = cnt32_to_63(cs->read(NULL));
+		return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+	}
+	return 0;
 }
diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c
index 75e49202a5e..ba034d421ec 100644
--- a/arch/microblaze/kernel/traps.c
+++ b/arch/microblaze/kernel/traps.c
@@ -16,13 +16,14 @@
 
 #include <asm/exceptions.h>
 #include <asm/system.h>
+#include <asm/unwind.h>
 
 void trap_init(void)
 {
 	__enable_hw_exceptions();
 }
 
-static unsigned long kstack_depth_to_print = 24;
+static unsigned long kstack_depth_to_print;	/* 0 == entire stack */
 
 static int __init kstack_setup(char *s)
 {
@@ -30,31 +31,47 @@ static int __init kstack_setup(char *s)
 }
 __setup("kstack=", kstack_setup);
 
-void show_trace(struct task_struct *task, unsigned long *stack)
+void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	unsigned long addr;
-
-	if (!stack)
-		stack = (unsigned long *)&stack;
+	unsigned long words_to_show;
+	u32 fp = (u32) sp;
+
+	if (fp == 0) {
+		if (task) {
+			fp = ((struct thread_info *)
+				(task->stack))->cpu_context.r1;
+		} else {
+			/* Pick up caller of dump_stack() */
+			fp = (u32)&sp - 8;
+		}
+	}
 
-	printk(KERN_NOTICE "Call Trace: ");
-#ifdef CONFIG_KALLSYMS
-	printk(KERN_NOTICE "\n");
-#endif
-	while (!kstack_end(stack)) {
-		addr = *stack++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
+	words_to_show = (THREAD_SIZE - (fp & (THREAD_SIZE - 1))) >> 2;
+	if (kstack_depth_to_print && (words_to_show > kstack_depth_to_print))
+		words_to_show = kstack_depth_to_print;
+
+	pr_info("Kernel Stack:\n");
+
+	/*
+	 * Make the first line an 'odd' size if necessary to get
+	 * remaining lines to start at an address multiple of 0x10
+	 */
+	if (fp & 0xF) {
+		unsigned long line1_words = (0x10 - (fp & 0xF)) >> 2;
+		if (line1_words < words_to_show) {
+			print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32,
+				       4, (void *)fp, line1_words << 2, 0);
+			fp += line1_words << 2;
+			words_to_show -= line1_words;
+		}
 	}
-	printk(KERN_NOTICE "\n");
+	print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 32, 4, (void *)fp,
+		       words_to_show << 2, 0);
+	printk(KERN_INFO "\n\n");
+
+	pr_info("Call Trace:\n");
+	microblaze_unwind(task, NULL);
+	pr_info("\n");
 
 	if (!task)
 		task = current;
@@ -62,34 +79,6 @@ void show_trace(struct task_struct *task, unsigned long *stack)
 	debug_show_held_locks(task);
 }
 
-void show_stack(struct task_struct *task, unsigned long *sp)
-{
-	unsigned long *stack;
-	int i;
-
-	if (sp == NULL) {
-		if (task)
-			sp = (unsigned long *) ((struct thread_info *)
-						(task->stack))->cpu_context.r1;
-		else
-			sp = (unsigned long *)&sp;
-	}
-
-	stack = sp;
-
-	printk(KERN_INFO "\nStack:\n  ");
-
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (kstack_end(sp))
-			break;
-		if (i && ((i % 8) == 0))
-			printk("\n  ");
-		printk("%08lx ", *sp++);
-	}
-	printk("\n");
-	show_trace(task, stack);
-}
-
 void dump_stack(void)
 {
 	show_stack(NULL, NULL);
diff --git a/arch/microblaze/kernel/unwind.c b/arch/microblaze/kernel/unwind.c
new file mode 100644
index 00000000000..fefac5c3358
--- /dev/null
+++ b/arch/microblaze/kernel/unwind.c
@@ -0,0 +1,318 @@
+/*
+ * Backtrace support for Microblaze
+ *
+ * Copyright (C) 2010  Digital Design Corporation
+ *
+ * Based on arch/sh/kernel/cpu/sh5/unwind.c code which is:
+ * Copyright (C) 2004  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/* #define DEBUG 1 */
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <asm/sections.h>
+#include <asm/exceptions.h>
+#include <asm/unwind.h>
+
+struct stack_trace;
+
+/*
+ * On Microblaze, finding the previous stack frame is a little tricky.
+ * At this writing (3/2010), Microblaze does not support CONFIG_FRAME_POINTERS,
+ * and even if it did, gcc (4.1.2) does not store the frame pointer at
+ * a consistent offset within each frame. To determine frame size, it is
+ * necessary to search for the assembly instruction that creates or reclaims
+ * the frame and extract the size from it.
+ *
+ * Microblaze stores the stack pointer in r1, and creates a frame via
+ *
+ *     addik r1, r1, -FRAME_SIZE
+ *
+ * The frame is reclaimed via
+ *
+ *     addik r1, r1, FRAME_SIZE
+ *
+ * Frame creation occurs at or near the top of a function.
+ * Depending on the compiler, reclaim may occur at the end, or before
+ * a mid-function return.
+ *
+ * A stack frame is usually not created in a leaf function.
+ *
+ */
+
+/**
+ * get_frame_size - Extract the stack adjustment from an
+ *                  "addik r1, r1, adjust" instruction
+ * @instr : Microblaze instruction
+ *
+ * Return - Number of stack bytes the instruction reserves or reclaims
+ */
+inline long get_frame_size(unsigned long instr)
+{
+	return abs((s16)(instr & 0xFFFF));
+}
+
+/**
+ * find_frame_creation - Search backward to find the instruction that creates
+ *                       the stack frame (hopefully, for the same function the
+ *                       initial PC is in).
+ * @pc : Program counter at which to begin the search
+ *
+ * Return - PC at which stack frame creation occurs
+ *          NULL if this cannot be found, i.e. a leaf function
+ */
+static unsigned long *find_frame_creation(unsigned long *pc)
+{
+	int i;
+
+	/* NOTE: Distance to search is arbitrary
+	 *	 250 works well for most things,
+	 *	 750 picks up things like tcp_recvmsg(),
+	 *	1000 needed for fat_fill_super()
+	 */
+	for (i = 0; i < 1000; i++, pc--) {
+		unsigned long instr;
+		s16 frame_size;
+
+		if (!kernel_text_address((unsigned long) pc))
+			return NULL;
+
+		instr = *pc;
+
+		/* addik r1, r1, foo ? */
+		if ((instr & 0xFFFF0000) != 0x30210000)
+			continue;	/* No */
+
+		frame_size = get_frame_size(instr);
+		if ((frame_size < 8) || (frame_size & 3)) {
+			pr_debug("    Invalid frame size %d at 0x%p\n",
+				 frame_size, pc);
+			return NULL;
+		}
+
+		pr_debug("    Found frame creation at 0x%p, size %d\n", pc,
+			 frame_size);
+		return pc;
+	}
+
+	return NULL;
+}
+
+/**
+ * lookup_prev_stack_frame - Find the stack frame of the previous function.
+ * @fp          : Frame (stack) pointer for current function
+ * @pc          : Program counter within current function
+ * @leaf_return : r15 value within current function. If the current function
+ *		  is a leaf, this is the caller's return address.
+ * @pprev_fp    : On exit, set to frame (stack) pointer for previous function
+ * @pprev_pc    : On exit, set to current function caller's return address
+ *
+ * Return - 0 on success, -EINVAL if the previous frame cannot be found
+ */
+static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
+				   unsigned long leaf_return,
+				   unsigned long *pprev_fp,
+				   unsigned long *pprev_pc)
+{
+	unsigned long *prologue = NULL;
+
+	/* _switch_to is a special leaf function */
+	if (pc != (unsigned long) &_switch_to)
+		prologue = find_frame_creation((unsigned long *)pc);
+
+	if (prologue) {
+		long frame_size = get_frame_size(*prologue);
+
+		*pprev_fp = fp + frame_size;
+		*pprev_pc = *(unsigned long *)fp;
+	} else {
+		if (!leaf_return)
+			return -EINVAL;
+		*pprev_pc = leaf_return;
+		*pprev_fp = fp;
+	}
+
+	/* NOTE: don't check kernel_text_address here, to allow display
+	 *	 of userland return address
+	 */
+	return (!*pprev_pc || (*pprev_pc & 3)) ? -EINVAL : 0;
+}
+
+static void microblaze_unwind_inner(struct task_struct *task,
+				    unsigned long pc, unsigned long fp,
+				    unsigned long leaf_return,
+				    struct stack_trace *trace);
+
+/**
+ * unwind_trap - Unwind through a system trap, that stored previous state
+ *		 on the stack.
+ */
+#ifdef CONFIG_MMU
+static inline void unwind_trap(struct task_struct *task, unsigned long pc,
+				unsigned long fp, struct stack_trace *trace)
+{
+	/* To be implemented */
+}
+#else
+static inline void unwind_trap(struct task_struct *task, unsigned long pc,
+				unsigned long fp, struct stack_trace *trace)
+{
+	const struct pt_regs *regs = (const struct pt_regs *) fp;
+	microblaze_unwind_inner(task, regs->pc, regs->r1, regs->r15, trace);
+}
+#endif
+
+/**
+ * microblaze_unwind_inner - Unwind the stack from the specified point
+ * @task  : Task whose stack we are to unwind (may be NULL)
+ * @pc    : Program counter from which we start unwinding
+ * @fp    : Frame (stack) pointer from which we start unwinding
+ * @leaf_return : Value of r15 at pc. If the function is a leaf, this is
+ *				  the caller's return address.
+ * @trace : Where to store stack backtrace (PC values).
+ *	    NULL == print backtrace to kernel log
+ */
+void microblaze_unwind_inner(struct task_struct *task,
+			     unsigned long pc, unsigned long fp,
+			     unsigned long leaf_return,
+			     struct stack_trace *trace)
+{
+	int ofs = 0;
+
+	pr_debug("    Unwinding with PC=%p, FP=%p\n", (void *)pc, (void *)fp);
+	if (!pc || !fp || (pc & 3) || (fp & 3)) {
+		pr_debug("    Invalid state for unwind, aborting\n");
+		return;
+	}
+	for (; pc != 0;) {
+		unsigned long next_fp, next_pc = 0;
+		unsigned long return_to = pc +  2 * sizeof(unsigned long);
+		const struct trap_handler_info *handler =
+			&microblaze_trap_handlers;
+
+		/* Is previous function the HW exception handler? */
+		if ((return_to >= (unsigned long)&_hw_exception_handler)
+		    &&(return_to < (unsigned long)&ex_handler_unhandled)) {
+			/*
+			 * HW exception handler doesn't save all registers,
+			 * so we open-code a special case of unwind_trap()
+			 */
+#ifndef CONFIG_MMU
+			const struct pt_regs *regs =
+				(const struct pt_regs *) fp;
+#endif
+			pr_info("HW EXCEPTION\n");
+#ifndef CONFIG_MMU
+			microblaze_unwind_inner(task, regs->r17 - 4,
+						fp + EX_HANDLER_STACK_SIZ,
+						regs->r15, trace);
+#endif
+			return;
+		}
+
+		/* Is previous function a trap handler? */
+		for (; handler->start_addr; ++handler) {
+			if ((return_to >= handler->start_addr)
+			    && (return_to <= handler->end_addr)) {
+				if (!trace)
+					pr_info("%s\n", handler->trap_name);
+				unwind_trap(task, pc, fp, trace);
+				return;
+			}
+		}
+		pc -= ofs;
+
+		if (trace) {
+#ifdef CONFIG_STACKTRACE
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = pc;
+
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+#endif
+		} else {
+			/* Have we reached userland? */
+			if (unlikely(pc == task_pt_regs(task)->pc)) {
+				pr_info("[<%p>] PID %lu [%s]\n",
+					(void *) pc,
+					(unsigned long) task->pid,
+					task->comm);
+				break;
+			} else
+				print_ip_sym(pc);
+		}
+
+		/* Stop when we reach anything not part of the kernel */
+		if (!kernel_text_address(pc))
+			break;
+
+		if (lookup_prev_stack_frame(fp, pc, leaf_return, &next_fp,
+					    &next_pc) == 0) {
+			ofs = sizeof(unsigned long);
+			pc = next_pc & ~3;
+			fp = next_fp;
+			leaf_return = 0;
+		} else {
+			pr_debug("    Failed to find previous stack frame\n");
+			break;
+		}
+
+		pr_debug("    Next PC=%p, next FP=%p\n",
+			 (void *)next_pc, (void *)next_fp);
+	}
+}
+
+/**
+ * microblaze_unwind - Stack unwinder for Microblaze (external entry point)
+ * @task  : Task whose stack we are to unwind (NULL == current)
+ * @trace : Where to store stack backtrace (PC values).
+ *	    NULL == print backtrace to kernel log
+ */
+void microblaze_unwind(struct task_struct *task, struct stack_trace *trace)
+{
+	if (task) {
+		if (task == current) {
+			const struct pt_regs *regs = task_pt_regs(task);
+			microblaze_unwind_inner(task, regs->pc, regs->r1,
+						regs->r15, trace);
+		} else {
+			struct thread_info *thread_info =
+				(struct thread_info *)(task->stack);
+			const struct cpu_context *cpu_context =
+				&thread_info->cpu_context;
+
+			microblaze_unwind_inner(task,
+						(unsigned long) &_switch_to,
+						cpu_context->r1,
+						cpu_context->r15, trace);
+		}
+	} else {
+		unsigned long pc, fp;
+
+		__asm__ __volatile__ ("or %0, r1, r0" : "=r" (fp));
+
+		__asm__ __volatile__ (
+			"brlid %0, 0f;"
+			"nop;"
+			"0:"
+			: "=r" (pc)
+		);
+
+		/* Since we are not a leaf function, use leaf_return = 0 */
+		microblaze_unwind_inner(current, pc, fp, 0, trace);
+	}
+}
+
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index db72d712460..a09f2962fbe 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -10,7 +10,7 @@
 
 OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze")
 OUTPUT_ARCH(microblaze)
-ENTRY(_start)
+ENTRY(microblaze_start)
 
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
@@ -20,7 +20,7 @@ jiffies = jiffies_64 + 4;
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;
-	_start = CONFIG_KERNEL_BASE_ADDR;
+	microblaze_start = CONFIG_KERNEL_BASE_ADDR;
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
@@ -55,7 +55,7 @@ SECTIONS {
 	 */
 	.sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
 		_ssrw = .;
-		. = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
+		. = ALIGN(PAGE_SIZE); /* page aligned when MMU used */
 		*(.sdata2)
 	. = ALIGN(8);
 	_essrw = .;
@@ -70,7 +70,7 @@ SECTIONS {
 	/* Reserve some low RAM for r0 based memory references */
 	. = ALIGN(0x4) ;
 	r0_ram = . ;
-	. = . +  4096;	/* a page should be enough */
+	. = . +  PAGE_SIZE;	/* a page should be enough */
 
 	/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
 	. = ALIGN(8);
@@ -120,7 +120,7 @@ SECTIONS {
 
 	__init_end_before_initramfs = .;
 
-	.init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+	.init.ramfs ALIGN(PAGE_SIZE) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
 		__initramfs_start = .;
 		*(.init.ramfs)
 		__initramfs_end = .;
@@ -132,11 +132,11 @@ SECTIONS {
  * so that __init_end == __bss_start. This will make image.elf
  * consistent with the image.bin
  */
-		/* . = ALIGN(4096); */
+		/* . = ALIGN(PAGE_SIZE); */
 	}
 	__init_end = .;
 
-	.bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) {
+	.bss ALIGN (PAGE_SIZE) : AT(ADDR(.bss) - LOAD_OFFSET) {
 		/* page aligned when MMU used */
 		__bss_start = . ;
 			*(.bss*)
@@ -145,7 +145,7 @@ SECTIONS {
 		__bss_stop = . ;
 		_ebss = . ;
 	}
-	. = ALIGN(4096);
+	. = ALIGN(PAGE_SIZE);
 	_end = .;
 
 	DISCARDS
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index bab92299318..57bd2a09610 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -37,10 +37,6 @@
 #include <linux/uaccess.h>
 #include <asm/exceptions.h>
 
-#if defined(CONFIG_KGDB)
-int debugger_kernel_faults = 1;
-#endif
-
 static unsigned long pte_misses;	/* updated by do_page_fault() */
 static unsigned long pte_errors;	/* updated by do_page_fault() */
 
@@ -81,10 +77,6 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 	}
 
 	/* kernel has accessed a bad area */
-#if defined(CONFIG_KGDB)
-	if (debugger_kernel_faults)
-		debugger(regs);
-#endif
 	die("kernel access of bad area", regs, sig);
 }
 
@@ -115,13 +107,6 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	if ((error_code & 0x13) == 0x13 || (error_code & 0x11) == 0x11)
 		is_write = 0;
 
-#if defined(CONFIG_KGDB)
-	if (debugger_fault_handler && regs->trap == 0x300) {
-		debugger_fault_handler(regs);
-		return;
-	}
-#endif /* CONFIG_KGDB */
-
 	if (unlikely(in_atomic() || !mm)) {
 		if (kernel_mode(regs))
 			goto bad_area_nosemaphore;
@@ -226,7 +211,6 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-survive:
 	fault = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index db593498992..65eb00419d1 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -134,13 +134,8 @@ void __init setup_memory(void)
 	 * for 4GB of memory, using 4kB pages), plus 1 page
 	 * (in case the address isn't page-aligned).
 	 */
-#ifndef CONFIG_MMU
-	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
-					min_low_pfn, max_low_pfn);
-#else
-	map_size = init_bootmem_node(&contig_page_data,
+	map_size = init_bootmem_node(NODE_DATA(0),
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
-#endif
 	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild
new file mode 100644
index 00000000000..e322d65f33a
--- /dev/null
+++ b/arch/mips/Kbuild
@@ -0,0 +1,15 @@
+# Fail on warnings - also for files referenced in subdirs
+# -Werror can be disabled for specific files using:
+# CFLAGS_<file.o> := -Wno-error
+subdir-ccflags-y := -Werror
+
+# platform specific definitions
+include arch/mips/Kbuild.platforms
+obj-y := $(platform-y)
+
+# mips object files
+# The object files are linked as core-y files would be linked
+
+obj-y += kernel/
+obj-y += mm/
+obj-y += math-emu/
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
new file mode 100644
index 00000000000..78439b8a83c
--- /dev/null
+++ b/arch/mips/Kbuild.platforms
@@ -0,0 +1,32 @@
+# All platforms listed in alphabetic order
+
+platforms += alchemy
+platforms += ar7
+platforms += bcm47xx
+platforms += bcm63xx
+platforms += cavium-octeon
+platforms += cobalt
+platforms += dec
+platforms += emma
+platforms += jazz
+platforms += jz4740
+platforms += lasat
+platforms += loongson
+platforms += mipssim
+platforms += mti-malta
+platforms += pmc-sierra
+platforms += pnx833x
+platforms += pnx8550
+platforms += powertv
+platforms += rb532
+platforms += sgi-ip22
+platforms += sgi-ip27
+platforms += sgi-ip32
+platforms += sibyte
+platforms += sni
+platforms += txx9
+platforms += vr41xx
+platforms += wrppmc
+
+# include the platform specific files
+include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cdaae942623..3ad59dde485 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -10,6 +10,8 @@ config MIPS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 	select RTC_LIB if !MACH_LOONGSON
 
 mainmenu "Linux/MIPS Kernel Configuration"
@@ -23,8 +25,17 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
-config MACH_ALCHEMY
+config MIPS_ALCHEMY
 	bool "Alchemy processor based machines"
+	select 64BIT_PHYS_ADDR
+	select CEVT_R4K_LIB
+	select CSRC_R4K_LIB
+	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_APM_EMULATION
+	select GENERIC_GPIO
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SYS_SUPPORTS_ZBOOT
 
 config AR7
@@ -62,6 +73,7 @@ config BCM47XX
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
 	select SSB_EMBEDDED
+	select SSB_B43_PCI_BRIDGE if PCI
 	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
@@ -162,6 +174,18 @@ config MACH_JAZZ
 	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
 	 Olivetti M700-10 workstations.
 
+config MACH_JZ4740
+	bool "Ingenic JZ4740 based machines"
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select SYS_HAS_EARLY_PRINTK
+	select HAVE_PWM
+
 config LASAT
 	bool "LASAT Networks platforms"
 	select CEVT_R4K
@@ -686,6 +710,7 @@ endchoice
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
+source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"
@@ -733,10 +758,6 @@ config GENERIC_CLOCKEVENTS
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_CMOS_UPDATE
 	bool
 	default y
@@ -892,6 +913,9 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
+config EXPORT_UASM
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 0b9c01add0a..f4a4b663ebb 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -93,7 +93,8 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
 cflags-y			+= -msoft-float
 LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
-MODFLAGS			+= -mlong-calls
+KBUILD_AFLAGS_MODULE		+= -mlong-calls
+KBUILD_CFLAGS_MODULE		+= -mlong-calls
 
 cflags-y += -ffreestanding
 
@@ -130,26 +131,6 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-# only gcc >= 4.4 have the loongson-specific support
-cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += \
-	$(call cc-option,-march=loongson2e,-march=r4600)
-cflags-$(CONFIG_CPU_LOONGSON2F) += \
-	$(call cc-option,-march=loongson2f,-march=r4600)
-# enable the workarounds for loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
-  else
-    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
-  endif
-  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
-    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
-  else
-    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
-  endif
-endif
-
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
@@ -185,7 +166,8 @@ cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
 
 ifdef CONFIG_CPU_SB1
 ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
-MODFLAGS	+= -msb1-pass1-workarounds
+KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds
+KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
 endif
 endif
 
@@ -209,455 +191,7 @@ endif
 #
 # Board-dependent options and extra files
 #
-
-#
-# Texas Instruments AR7
-#
-core-$(CONFIG_AR7)		+= arch/mips/ar7/
-cflags-$(CONFIG_AR7)		+= -I$(srctree)/arch/mips/include/asm/mach-ar7
-load-$(CONFIG_AR7)		+= 0xffffffff94100000
-
-#
-# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
-#
-core-$(CONFIG_MACH_JAZZ)	+= arch/mips/jazz/
-cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctree)/arch/mips/include/asm/mach-jazz
-load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
-
-#
-# Common Alchemy Au1x00 stuff
-#
-core-$(CONFIG_SOC_AU1X00)	+= arch/mips/alchemy/common/
-
-#
-# AMD Alchemy Pb1000 eval board
-#
-core-$(CONFIG_MIPS_PB1000)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Pb1100 eval board
-#
-core-$(CONFIG_MIPS_PB1100)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Pb1500 eval board
-#
-core-$(CONFIG_MIPS_PB1500)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Pb1550 eval board
-#
-core-$(CONFIG_MIPS_PB1550)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Pb1200 eval board
-#
-core-$(CONFIG_MIPS_PB1200)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
-load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1000 eval board
-#
-core-$(CONFIG_MIPS_DB1000)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1100 eval board
-#
-core-$(CONFIG_MIPS_DB1100)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1500 eval board
-#
-core-$(CONFIG_MIPS_DB1500)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1550 eval board
-#
-core-$(CONFIG_MIPS_DB1550)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1200 eval board
-#
-core-$(CONFIG_MIPS_DB1200)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Bosporus eval board
-#
-core-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_BOSPORUS)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_BOSPORUS)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Mirage eval board
-#
-core-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/alchemy/devboards/
-cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
-
-#
-# 4G-Systems eval board
-#
-libs-$(CONFIG_MIPS_MTX1)	+= arch/mips/alchemy/mtx-1/
-load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
-
-#
-# MyCable eval board
-#
-libs-$(CONFIG_MIPS_XXS1500)	+= arch/mips/alchemy/xxs1500/
-load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
-
-# must be last for Alchemy systems for GPIO to work properly
-cflags-$(CONFIG_SOC_AU1X00)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
-
-
-#
-# Cobalt Server
-#
-core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
-cflags-$(CONFIG_MIPS_COBALT)	+= -I$(srctree)/arch/mips/include/asm/mach-cobalt
-load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
-
-#
-# DECstation family
-#
-core-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/
-cflags-$(CONFIG_MACH_DECSTATION)+= -I$(srctree)/arch/mips/include/asm/mach-dec
-libs-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/prom/
-load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
-
-#
-# Wind River PPMC Board (4KC + GT64120)
-#
-core-$(CONFIG_WR_PPMC)		+= arch/mips/gt64120/wrppmc/
-cflags-$(CONFIG_WR_PPMC)		+= -I$(srctree)/arch/mips/include/asm/mach-wrppmc
-load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
-
-#
-# Loongson family
-#
-core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/
-cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
-                    -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
-
-#
-# MIPS Malta board
-#
-core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
-cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
-load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= $(COMPRESSION_FNAME).bin
-
-#
-# MIPS SIM
-#
-core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
-cflags-$(CONFIG_MIPS_SIM)	+= -I$(srctree)/arch/mips/include/asm/mach-mipssim
-load-$(CONFIG_MIPS_SIM)		+= 0x80100000
-
-#
-# PMC-Sierra MSP SOCs
-#
-core-$(CONFIG_PMC_MSP)		+= arch/mips/pmc-sierra/msp71xx/
-cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
-					-mno-branch-likely
-load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
-
-#
-# PMC-Sierra Yosemite
-#
-core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
-cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemite
-load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
-
-#
-# LASAT platforms
-#
-core-$(CONFIG_LASAT)		+= arch/mips/lasat/
-cflags-$(CONFIG_LASAT)		+= -I$(srctree)/arch/mips/include/asm/mach-lasat
-load-$(CONFIG_LASAT)		+= 0xffffffff80000000
-
-#
-# Common VR41xx
-#
-core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
-cflags-$(CONFIG_MACH_VR41XX)	+= -I$(srctree)/arch/mips/include/asm/mach-vr41xx
-
-#
-# ZAO Networks Capcella (VR4131)
-#
-load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
-
-#
-# Victor MP-C303/304 (VR4122)
-#
-load-$(CONFIG_VICTOR_MPC30X)	+= 0xffffffff80001000
-
-#
-# IBM WorkPad z50 (VR4121)
-#
-core-$(CONFIG_IBM_WORKPAD)	+= arch/mips/vr41xx/ibm-workpad/
-load-$(CONFIG_IBM_WORKPAD)	+= 0xffffffff80004000
-
-#
-# CASIO CASSIPEIA E-55/65 (VR4111)
-#
-core-$(CONFIG_CASIO_E55)	+= arch/mips/vr41xx/casio-e55/
-load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
-
-#
-# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131)
-#
-load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
-
-# NXP STB225
-core-$(CONFIG_SOC_PNX833X)		+= arch/mips/nxp/pnx833x/common/
-cflags-$(CONFIG_SOC_PNX833X)	+= -Iarch/mips/include/asm/mach-pnx833x
-libs-$(CONFIG_NXP_STB220)		+= arch/mips/nxp/pnx833x/stb22x/
-load-$(CONFIG_NXP_STB220)		+= 0xffffffff80001000
-libs-$(CONFIG_NXP_STB225)		+= arch/mips/nxp/pnx833x/stb22x/
-load-$(CONFIG_NXP_STB225)		+= 0xffffffff80001000
-
-#
-# Common NXP PNX8550
-#
-core-$(CONFIG_SOC_PNX8550)	+= arch/mips/nxp/pnx8550/common/
-cflags-$(CONFIG_SOC_PNX8550)	+= -I$(srctree)/arch/mips/include/asm/mach-pnx8550
-
-#
-# NXP PNX8550 JBS board
-#
-libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/nxp/pnx8550/jbs/
-#cflags-$(CONFIG_PNX8550_JBS)	+= -I$(srctree)/arch/mips/include/asm/mach-pnx8550
-load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
-
-# NXP PNX8550 STB810 board
-#
-libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/nxp/pnx8550/stb810/
-load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
-
-#
-# Common NEC EMMAXXX
-#
-core-$(CONFIG_SOC_EMMA2RH)	+= arch/mips/emma/common/
-cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
-
-#
-# NEC EMMA2RH Mark-eins
-#
-core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
-load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
-
-#
-# Cisco PowerTV Platform
-#
-core-$(CONFIG_POWERTV)		+= arch/mips/powertv/
-cflags-$(CONFIG_POWERTV)        += -I$(srctree)/arch/mips/include/asm/mach-powertv
-load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
-
-#
-# SGI IP22 (Indy/Indigo2)
-#
-# Set the load address to >= 0xffffffff88069000 if you want to leave space for
-# symmon, 0xffffffff80002000 for production kernels.  Note that the value must
-# be aligned to a multiple of the kernel stack size or the handling of the
-# current variable will break so for 64-bit kernels we have to raise the start
-# address by 8kb.
-#
-core-$(CONFIG_SGI_IP22)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP22)	+= -I$(srctree)/arch/mips/include/asm/mach-ip22
-ifdef CONFIG_32BIT
-load-$(CONFIG_SGI_IP22)		+= 0xffffffff88002000
-endif
-ifdef CONFIG_64BIT
-load-$(CONFIG_SGI_IP22)		+= 0xffffffff88004000
-endif
-
-#
-# SGI-IP27 (Origin200/2000)
-#
-# Set the load address to >= 0xc000000000300000 if you want to leave space for
-# symmon, 0xc00000000001c000 for production kernels.  Note that the value must
-# be 16kb aligned or the handling of the current variable will break.
-#
-ifdef CONFIG_SGI_IP27
-core-$(CONFIG_SGI_IP27)		+= arch/mips/sgi-ip27/
-cflags-$(CONFIG_SGI_IP27)	+= -I$(srctree)/arch/mips/include/asm/mach-ip27
-ifdef CONFIG_MAPPED_KERNEL
-load-$(CONFIG_SGI_IP27)		+= 0xc00000004001c000
-OBJCOPYFLAGS			:= --change-addresses=0x3fffffff80000000
-dataoffset-$(CONFIG_SGI_IP27)	+= 0x01000000
-else
-load-$(CONFIG_SGI_IP27)		+= 0xa80000000001c000
-OBJCOPYFLAGS			:= --change-addresses=0x57ffffff80000000
-endif
-endif
-
-#
-# SGI IP28 (Indigo2 R10k)
-#
-# Set the load address to >= 0xa800000020080000 if you want to leave space for
-# symmon, 0xa800000020004000 for production kernels ?  Note that the value must
-# be 16kb aligned or the handling of the current variable will break.
-# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
-#
-ifdef CONFIG_SGI_IP28
-  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
-      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
-  endif
-endif
-core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
-load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
-
-#
-# SGI-IP32 (O2)
-#
-# Set the load address to >= 80069000 if you want to leave space for symmon,
-# 0xffffffff80004000 for production kernels.  Note that the value must be aligned to
-# a multiple of the kernel stack size or the handling of the current variable
-# will break.
-#
-core-$(CONFIG_SGI_IP32)		+= arch/mips/sgi-ip32/
-cflags-$(CONFIG_SGI_IP32)	+= -I$(srctree)/arch/mips/include/asm/mach-ip32
-load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
-
-#
-# Sibyte SB1250/BCM1480 SOC
-#
-# This is a LIB so that it links at the end, and initcalls are later
-# the sequence; but it is built as an object so that modules don't get
-# removed (as happens, even if they have __initcall/module_init)
-#
-core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
-core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM112X)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
-
-core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
-core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_SB1250)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
-
-core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
-core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
-
-core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
-core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/common/
-cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -I$(srctree)/arch/mips/include/asm/mach-sibyte \
-			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
-
-#
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
-# Sibyte BCM91125C (CRhone) board
-# Sibyte BCM91125E (Rhone) board
-# Sibyte SWARM board
-# Sibyte BCM91x80 (BigSur) board
-#
-core-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
-core-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
-load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
-
-#
-# Broadcom BCM47XX boards
-#
-core-$(CONFIG_BCM47XX)		+= arch/mips/bcm47xx/
-cflags-$(CONFIG_BCM47XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm47xx
-load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
-
-#
-# Broadcom BCM63XX boards
-#
-core-$(CONFIG_BCM63XX)		+= arch/mips/bcm63xx/
-cflags-$(CONFIG_BCM63XX)	+= -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
-load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
-
-#
-# SNI RM
-#
-core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
-cflags-$(CONFIG_SNI_RM)		+= -I$(srctree)/arch/mips/include/asm/mach-rm
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
-else
-load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
-endif
-all-$(CONFIG_SNI_RM)		:= $(COMPRESSION_FNAME).ecoff
-
-#
-# Common TXx9
-#
-core-$(CONFIG_MACH_TX39XX)	+= arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX39XX) += -I$(srctree)/arch/mips/include/asm/mach-tx39xx
-load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
-core-$(CONFIG_MACH_TX49XX)	+= arch/mips/txx9/generic/
-cflags-$(CONFIG_MACH_TX49XX) += -I$(srctree)/arch/mips/include/asm/mach-tx49xx
-load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
-
-#
-# Toshiba JMR-TX3927 board
-#
-core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
-
-#
-# Routerboard 532 board
-#
-core-$(CONFIG_MIKROTIK_RB532)	+= arch/mips/rb532/
-cflags-$(CONFIG_MIKROTIK_RB532) += -I$(srctree)/arch/mips/include/asm/mach-rc32434
-load-$(CONFIG_MIKROTIK_RB532)	+= 0xffffffff80101000
-
-#
-# Toshiba RBTX49XX boards
-#
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
-core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
-
-#
-# Cavium Octeon
-#
-core-$(CONFIG_CPU_CAVIUM_OCTEON)	+= arch/mips/cavium-octeon/
-cflags-$(CONFIG_CPU_CAVIUM_OCTEON)	+= -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
-core-$(CONFIG_CPU_CAVIUM_OCTEON)	+= arch/mips/cavium-octeon/executive/
-ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff84100000
-else
-load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
-endif
+include $(srctree)/arch/mips/Kbuild.platforms
 
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
@@ -706,7 +240,8 @@ head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
 
 libs-y			+= arch/mips/lib/
 
-core-y			+= arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
+# See arch/mips/Kbuild for content of core part of the kernel
+core-y += arch/mips/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
@@ -726,6 +261,9 @@ endif
 vmlinux.32: vmlinux
 	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 
+
+#obj-$(CONFIG_KPROBES)		+= kprobes.o
+
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.
@@ -733,35 +271,19 @@ vmlinux.32: vmlinux
 vmlinux.64: vmlinux
 	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 
-makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
-makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
-	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1)
-
 all:	$(all-y)
 
-vmlinuz: vmlinux FORCE
-	+@$(call makezboot,$@)
+# boot
+vmlinux.bin vmlinux.ecoff vmlinux.srec: $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) arch/mips/boot/$@
 
-vmlinuz.bin: vmlinux
-	+@$(call makezboot,$@)
+# boot/compressed
+vmlinuz vmlinuz.bin vmlinuz.ecoff vmlinuz.srec: $(vmlinux-32) FORCE
+	$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
+	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $@
 
-vmlinuz.ecoff: vmlinux
-	+@$(call makezboot,$@)
 
-vmlinuz.srec: vmlinux
-	+@$(call makezboot,$@)
-
-vmlinux.bin: $(vmlinux-32)
-	+@$(call makeboot,$@)
-
-vmlinux.ecoff: $(vmlinux-32)
-	+@$(call makeboot,$@)
-
-vmlinux.srec: $(vmlinux-32)
-	+@$(call makeboot,$@)
-
-CLEAN_FILES += vmlinux.ecoff \
-	       vmlinux.srec
+CLEAN_FILES += vmlinux.32 vmlinux.64
 
 archprepare:
 ifdef CONFIG_MIPS32_N32
@@ -780,9 +302,9 @@ install:
 	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
 
 archclean:
-	@$(MAKE) $(clean)=arch/mips/boot
-	@$(MAKE) $(clean)=arch/mips/boot/compressed
-	@$(MAKE) $(clean)=arch/mips/lasat
+	$(Q)$(MAKE) $(clean)=arch/mips/boot
+	$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
+	$(Q)$(MAKE) $(clean)=arch/mips/lasat
 
 define archhelp
 	echo '  install              - install kernel into $(INSTALL_PATH)'
@@ -796,11 +318,3 @@ define archhelp
 	echo
 	echo '  These will be default as apropriate for a configured platform.'
 endef
-
-CLEAN_FILES += vmlinux.32 \
-	       vmlinux.64 \
-	       vmlinux.ecoff \
-	       vmlinuz \
-	       vmlinuz.ecoff \
-	       vmlinuz.bin \
-	       vmlinuz.srec
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index df3b1a7eb15..2ccfd4a135b 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -11,7 +11,7 @@ config ALCHEMY_GPIO_INDIRECT
 
 choice
 	prompt "Machine type"
-	depends on MACH_ALCHEMY
+	depends on MIPS_ALCHEMY
 	default MIPS_DB1000
 
 config MIPS_MTX1
@@ -128,41 +128,33 @@ config MIPS_XXS1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
+config MIPS_GPR
+	bool "Trapeze ITS GPR board"
+	select SOC_AU1550
+	select HW_HAS_PCI
+	select DMA_NONCOHERENT
+	select MIPS_DISABLE_OBSOLETE_IDE
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
+
 endchoice
 
 config SOC_AU1000
 	bool
-	select SOC_AU1X00
 	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1100
 	bool
-	select SOC_AU1X00
 	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1500
 	bool
-	select SOC_AU1X00
 	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1550
 	bool
-	select SOC_AU1X00
 	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1200
 	bool
-	select SOC_AU1X00
 	select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1X00
-	bool
-	select 64BIT_PHYS_ADDR
-	select CEVT_R4K_LIB
-	select CSRC_R4K_LIB
-	select IRQ_CPU
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_GPIO
-	select ARCH_WANT_OPTIONAL_GPIOLIB
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
new file mode 100644
index 00000000000..96e9e41f1b2
--- /dev/null
+++ b/arch/mips/alchemy/Platform
@@ -0,0 +1,114 @@
+#
+# Core Alchemy code
+#
+platform-$(CONFIG_MIPS_ALCHEMY)	+= alchemy/common/
+
+
+#
+# AMD Alchemy Pb1000 eval board
+#
+platform-$(CONFIG_MIPS_PB1000)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
+load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Pb1100 eval board
+#
+platform-$(CONFIG_MIPS_PB1100)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
+load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Pb1500 eval board
+#
+platform-$(CONFIG_MIPS_PB1500)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
+load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Pb1550 eval board
+#
+platform-$(CONFIG_MIPS_PB1550)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
+load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Pb1200 eval board
+#
+platform-$(CONFIG_MIPS_PB1200)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Db1000 eval board
+#
+platform-$(CONFIG_MIPS_DB1000)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Db1100 eval board
+#
+platform-$(CONFIG_MIPS_DB1100)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Db1500 eval board
+#
+platform-$(CONFIG_MIPS_DB1500)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Db1550 eval board
+#
+platform-$(CONFIG_MIPS_DB1550)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Db1200 eval board
+#
+platform-$(CONFIG_MIPS_DB1200)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
+
+#
+# AMD Alchemy Bosporus eval board
+#
+platform-$(CONFIG_MIPS_BOSPORUS) += alchemy/devboards/
+cflags-$(CONFIG_MIPS_BOSPORUS)	 += -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_BOSPORUS)	 += 0xffffffff80100000
+
+#
+# AMD Alchemy Mirage eval board
+#
+platform-$(CONFIG_MIPS_MIRAGE)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
+
+#
+# 4G-Systems eval board
+#
+platform-$(CONFIG_MIPS_MTX1)	+= alchemy/mtx-1/
+load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
+
+#
+# MyCable eval board
+#
+platform-$(CONFIG_MIPS_XXS1500)	+= alchemy/xxs1500/
+load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
+
+#
+# Trapeze ITS GRP board
+#
+platform-$(CONFIG_MIPS_GPR)	+= alchemy/gpr/
+load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
+
+# boards can specify their own <gpio.h> in one of their include dirs.
+# If they do, placing this line here at the end will make sure the
+# compiler picks the board one.  If they don't, it will make sure
+# the alchemy generic gpio header is picked up.
+
+cflags-$(CONFIG_MIPS_ALCHEMY)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 06c0e65a54b..27811fe341d 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -18,5 +18,3 @@ ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
 endif
 
 obj-$(CONFIG_PCI)		+= pci.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 460c6285c1b..af0fe41055a 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -89,11 +89,7 @@ unsigned long au1xxx_calc_clock(void)
 	 * over backwards trying to determine the frequency.
 	 */
 	if (au1xxx_cpu_has_pll_wo())
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
-		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
-#else
 		cpu_speed = 396000000;
-#endif
 	else
 		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index f9e5622ebc9..1dc55ee2681 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
@@ -21,6 +22,8 @@
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
 
+#include <prom.h>
+
 #define PORT(_base, _irq)					\
 	{							\
 		.mapbase	= _base,			\
@@ -33,7 +36,6 @@
 	}
 
 static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SERIAL_8250_AU1X00)
 #if defined(CONFIG_SOC_AU1000)
 	PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
 	PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
@@ -54,7 +56,6 @@ static struct plat_serial8250_port au1x00_uart_data[] = {
 	PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
 	PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
 #endif
-#endif	/* CONFIG_SERIAL_8250_AU1X00 */
 	{ },
 };
 
@@ -436,17 +437,27 @@ static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
 	int err, i;
+	unsigned char ethaddr[6];
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+	/* use firmware-provided mac addr if available and necessary */
+	i = prom_get_ethernet_addr(ethaddr);
+	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
 	err = platform_add_devices(au1xxx_platform_devices,
 				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
+	ethaddr[5] += 1;	/* next addr for 2nd MAC */
+	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
 	/* Register second MAC if enabled in pinfunc */
 	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
-		platform_device_register(&au1xxx_eth1_device);
+		err = platform_device_register(&au1xxx_eth1_device);
 #endif
 
 	return err;
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index ecbd37f9ee8..826449c817c 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -16,5 +16,3 @@ obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
 obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
 obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index 3cb95a98ab3..3fa34c3abc0 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -216,14 +216,14 @@ static struct resource db1200_ide_res[] = {
 	}
 };
 
-static u64 ide_dmamask = DMA_32BIT_MASK;
+static u64 ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_ide_dev = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
 		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
 	.resource	= db1200_ide_res,
@@ -385,12 +385,12 @@ static struct au1550_spi_info db1200_spi_platdata = {
 	.activate_cs	= db1200_spi_cs_en,
 };
 
-static u64 spi_dmamask = DMA_32BIT_MASK;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_spi_dev = {
 	.dev	= {
 		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.platform_data		= &db1200_spi_platdata,
 	},
 	.name		= "au1550-spi",
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 50c9bef99da..9e45971343e 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -79,7 +79,6 @@ static struct au1000_eth_platform_data eth0_pdata = {
 
 static void bosporus_power_off(void)
 {
-	printk(KERN_INFO "It's now safe to turn off power\n");
 	while (1)
 		asm volatile (".set mips3 ; wait ; .set mips0");
 }
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 4ef50d86b18..f6540ec47a6 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -47,9 +47,11 @@ static void board_reset(char *c)
 
 static void board_power_off(void)
 {
-	printk(KERN_ALERT "It's now safe to remove power\n");
 	while (1)
-		asm volatile (".set mips3 ; wait ; .set mips1");
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
 }
 
 void __init board_setup(void)
diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
index 2ea9b02ef09..18c1bd53e4c 100644
--- a/arch/mips/alchemy/devboards/pb1200/Makefile
+++ b/arch/mips/alchemy/devboards/pb1200/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y := board_setup.o platform.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/gpr/Makefile b/arch/mips/alchemy/gpr/Makefile
new file mode 100644
index 00000000000..cb73fe256dc
--- /dev/null
+++ b/arch/mips/alchemy/gpr/Makefile
@@ -0,0 +1,8 @@
+#
+#  Copyright 2003 MontaVista Software Inc.
+#  Author: MontaVista Software, Inc. <source@mvista.com>
+#
+# Makefile for Trapeze ITS GPR board.
+#
+
+obj-y += board_setup.o init.o platform.o
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
new file mode 100644
index 00000000000..ad2e3f13793
--- /dev/null
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
+ *
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include <prom.h>
+
+#define UART1_ADDR	KSEG1ADDR(UART1_PHYS_ADDR)
+#define UART3_ADDR	KSEG1ADDR(UART3_PHYS_ADDR)
+
+char irq_tab_alchemy[][5] __initdata = {
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
+};
+
+static void gpr_reset(char *c)
+{
+	/* switch System-LED to orange (red# and green# on) */
+	alchemy_gpio_direction_output(4, 0);
+	alchemy_gpio_direction_output(5, 0);
+
+	/* trigger watchdog to reset board in 200ms */
+	printk(KERN_EMERG "Triggering watchdog soft reset...\n");
+	raw_local_irq_disable();
+	alchemy_gpio_direction_output(1, 0);
+	udelay(1);
+	alchemy_gpio_set_value(1, 1);
+	while (1)
+		cpu_wait();
+}
+
+static void gpr_power_off(void)
+{
+	while (1)
+		cpu_wait();
+}
+
+void __init board_setup(void)
+{
+	printk(KERN_INFO "Tarpeze ITS GPR board\n");
+
+	pm_power_off = gpr_power_off;
+	_machine_halt = gpr_power_off;
+	_machine_restart = gpr_reset;
+
+	/* Enable UART3 */
+	au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
+	au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+	/* Enable UART1 */
+	au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
+	au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+
+	/* Take away Reset of UMTS-card */
+	alchemy_gpio_direction_output(215, 1);
+
+#ifdef CONFIG_PCI
+#if defined(__MIPSEB__)
+	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
+#else
+	au_writel(0xf, Au1500_PCI_CFG);
+#endif
+#endif
+}
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
new file mode 100644
index 00000000000..f044f4c541d
--- /dev/null
+++ b/arch/mips/alchemy/gpr/init.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2010 Wolfgang Grandegger <wg@denx.de>
+ *
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include <prom.h>
+
+const char *get_system_type(void)
+{
+	return "GPR";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str)
+		memsize = 0x04000000;
+	else
+		strict_strtoul(memsize_str, 0, &memsize);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c
new file mode 100644
index 00000000000..14b46629cfc
--- /dev/null
+++ b/arch/mips/alchemy/gpr/platform.c
@@ -0,0 +1,183 @@
+/*
+ * GPR board platform device registration
+ *
+ * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+/*
+ * Watchdog
+ */
+static struct resource gpr_wdt_resource[] = {
+	[0] = {
+		.start	= 1,
+		.end	= 1,
+		.name	= "gpr-adm6320-wdt",
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device gpr_wdt_device = {
+	.name = "adm6320-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(gpr_wdt_resource),
+	.resource = gpr_wdt_resource,
+};
+
+/*
+ * FLASH
+ *
+ * 0x00000000-0x00200000 : "kernel"
+ * 0x00200000-0x00a00000 : "rootfs"
+ * 0x01d00000-0x01f00000 : "config"
+ * 0x01c00000-0x01d00000 : "yamon"
+ * 0x01d00000-0x01d40000 : "yamon env vars"
+ * 0x00000000-0x00a00000 : "kernel+rootfs"
+ */
+static struct mtd_partition gpr_mtd_partitions[] = {
+	{
+		.name	= "kernel",
+		.size	= 0x00200000,
+		.offset	= 0,
+	},
+	{
+		.name	= "rootfs",
+		.size	= 0x00800000,
+		.offset	= MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "config",
+		.size	= 0x00200000,
+		.offset	= 0x01d00000,
+	},
+	{
+		.name	= "yamon",
+		.size	= 0x00100000,
+		.offset	= 0x01c00000,
+	},
+	{
+		.name	= "yamon env vars",
+		.size	= 0x00040000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+	{
+		.name	= "kernel+rootfs",
+		.size	= 0x00a00000,
+		.offset	= 0,
+	},
+};
+
+static struct physmap_flash_data gpr_flash_data = {
+	.width		= 4,
+	.nr_parts	= ARRAY_SIZE(gpr_mtd_partitions),
+	.parts		= gpr_mtd_partitions,
+};
+
+static struct resource gpr_mtd_resource = {
+	.start	= 0x1e000000,
+	.end	= 0x1fffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device gpr_mtd_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &gpr_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &gpr_mtd_resource,
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led gpr_gpio_leds[] = {
+	{	/* green */
+		.name			= "gpr:green",
+		.gpio			= 4,
+		.active_low		= 1,
+	},
+	{	/* red */
+		.name			= "gpr:red",
+		.gpio			= 5,
+		.active_low		= 1,
+	}
+};
+
+static struct gpio_led_platform_data gpr_led_data = {
+	.num_leds = ARRAY_SIZE(gpr_gpio_leds),
+	.leds = gpr_gpio_leds,
+};
+
+static struct platform_device gpr_led_devices = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &gpr_led_data,
+	}
+};
+
+/*
+ * I2C
+ */
+static struct i2c_gpio_platform_data gpr_i2c_data = {
+	.sda_pin		= 209,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= 210,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+	.timeout		= HZ,
+ };
+
+static struct platform_device gpr_i2c_device = {
+	.name			= "i2c-gpio",
+	.id			= -1,
+	.dev.platform_data	= &gpr_i2c_data,
+};
+
+static struct i2c_board_info gpr_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("lm83", 0x18),
+		.type = "lm83"
+	}
+};
+
+static struct platform_device *gpr_devices[] __initdata = {
+	&gpr_wdt_device,
+	&gpr_mtd_device,
+	&gpr_i2c_device,
+	&gpr_led_devices,
+};
+
+static int __init gpr_dev_init(void)
+{
+	i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
+
+	return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
+}
+device_initcall(gpr_dev_init);
diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile
index 4a53815b3c6..81b540ceaf8 100644
--- a/arch/mips/alchemy/mtx-1/Makefile
+++ b/arch/mips/alchemy/mtx-1/Makefile
@@ -6,7 +6,4 @@
 # Makefile for 4G Systems MTX-1 board.
 #
 
-lib-y := init.o board_setup.o
-obj-y := platform.o
-
-EXTRA_CFLAGS += -Werror
+obj-y += init.o board_setup.o platform.o
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 52d883d37dd..6398fa95905 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -60,9 +60,11 @@ static void mtx1_reset(char *c)
 
 static void mtx1_power_off(void)
 {
-	printk(KERN_ALERT "It's now safe to remove power\n");
 	while (1)
-		asm volatile (".set mips3 ; wait ; .set mips1");
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
 }
 
 void __init board_setup(void)
@@ -105,14 +107,10 @@ void __init board_setup(void)
 int
 mtx1_pci_idsel(unsigned int devsel, int assert)
 {
-#define MTX_IDSEL_ONLY_0_AND_3 0
-#if MTX_IDSEL_ONLY_0_AND_3
-	if (devsel != 0 && devsel != 3) {
-		printk(KERN_ERR "*** not 0 or 3\n");
-		return 0;
-	}
-#endif
-
+	/* This function is only necessary to support a proprietary Cardbus
+	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+	 */
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
 		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile
index 4dc81d794cb..91defcf4f33 100644
--- a/arch/mips/alchemy/xxs1500/Makefile
+++ b/arch/mips/alchemy/xxs1500/Makefile
@@ -5,6 +5,4 @@
 # Makefile for MyCable XXS1500 board.
 #
 
-lib-y := init.o board_setup.o platform.o
-
-EXTRA_CFLAGS += -Werror
+obj-y += init.o board_setup.o platform.o
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 47b42927607..b43c918925d 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -42,9 +42,11 @@ static void xxs1500_reset(char *c)
 
 static void xxs1500_power_off(void)
 {
-	printk(KERN_ALERT "It's now safe to remove power\n");
 	while (1)
-		asm volatile (".set mips3 ; wait ; .set mips1");
+		asm volatile (
+		"	.set	mips32					\n"
+		"	wait						\n"
+		"	.set	mips0					\n");
 }
 
 void __init board_setup(void)
diff --git a/arch/mips/ar7/Makefile b/arch/mips/ar7/Makefile
index 26bc5da1899..7435e44b396 100644
--- a/arch/mips/ar7/Makefile
+++ b/arch/mips/ar7/Makefile
@@ -8,4 +8,3 @@ obj-y := \
 	platform.o \
 	gpio.o \
 	clock.o
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/ar7/Platform b/arch/mips/ar7/Platform
new file mode 100644
index 00000000000..0bf85c416c6
--- /dev/null
+++ b/arch/mips/ar7/Platform
@@ -0,0 +1,6 @@
+#
+# Texas Instruments AR7
+#
+platform-$(CONFIG_AR7)          += ar7/
+cflags-$(CONFIG_AR7)            += -I$(srctree)/arch/mips/include/asm/mach-ar7
+load-$(CONFIG_AR7)              += 0xffffffff94100000
diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 8f31d1d5968..0da5b2b8dd8 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -292,40 +292,28 @@ static struct platform_device cpmac_high = {
 	.num_resources	= ARRAY_SIZE(cpmac_high_res),
 };
 
-static inline unsigned char char2hex(char h)
+static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
 {
-	switch (h) {
-	case '0': case '1': case '2': case '3': case '4':
-	case '5': case '6': case '7': case '8': case '9':
-		return h - '0';
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-		return h - 'A' + 10;
-	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
-		return h - 'a' + 10;
-	default:
-		return 0;
-	}
-}
-
-static void cpmac_get_mac(int instance, unsigned char *dev_addr)
-{
-	int i;
-	char name[5], default_mac[ETH_ALEN], *mac;
+	char name[5], *mac;
 
-	mac = NULL;
 	sprintf(name, "mac%c", 'a' + instance);
 	mac = prom_getenv(name);
-	if (!mac) {
+	if (!mac && instance) {
 		sprintf(name, "mac%c", 'a');
 		mac = prom_getenv(name);
 	}
-	if (!mac) {
-		random_ether_addr(default_mac);
-		mac = default_mac;
-	}
-	for (i = 0; i < 6; i++)
-		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
-			char2hex(mac[i * 3 + 1]);
+
+	if (mac) {
+		if (sscanf(mac, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+					&dev_addr[0], &dev_addr[1],
+					&dev_addr[2], &dev_addr[3],
+					&dev_addr[4], &dev_addr[5]) != 6) {
+			pr_warning("cannot parse mac address, "
+					"using random address\n");
+			random_ether_addr(dev_addr);
+		}
+	} else
+		random_ether_addr(dev_addr);
 }
 
 /*****************************************************************************
diff --git a/arch/mips/bcm47xx/Platform b/arch/mips/bcm47xx/Platform
new file mode 100644
index 00000000000..874b7ca4cd1
--- /dev/null
+++ b/arch/mips/bcm47xx/Platform
@@ -0,0 +1,7 @@
+#
+# Broadcom BCM47XX boards
+#
+platform-$(CONFIG_BCM47XX)	+= bcm47xx/
+cflags-$(CONFIG_BCM47XX)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-bcm47xx
+load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c
index 06e03b222f6..e5b6615731e 100644
--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -69,7 +69,7 @@ int nvram_getenv(char *name, char *val, size_t val_len)
 	char *var, *value, *end, *eq;
 
 	if (!name)
-		return 1;
+		return NVRAM_ERR_INV_PARAM;
 
 	if (!nvram_buf[0])
 		early_nvram_init();
@@ -89,6 +89,6 @@ int nvram_getenv(char *name, char *val, size_t val_len)
 			return 0;
 		}
 	}
-	return 1;
+	return NVRAM_ERR_ENVNOTFOUND;
 }
 EXPORT_SYMBOL(nvram_getenv);
diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c
index 0fa646c5a84..f6e9063cc4c 100644
--- a/arch/mips/bcm47xx/prom.c
+++ b/arch/mips/bcm47xx/prom.c
@@ -126,6 +126,7 @@ static __init void prom_init_cmdline(void)
 static __init void prom_init_mem(void)
 {
 	unsigned long mem;
+	unsigned long max;
 
 	/* Figure out memory size by finding aliases.
 	 *
@@ -134,21 +135,26 @@ static __init void prom_init_mem(void)
 	 * want to reuse the memory used by CFE (around 4MB). That means cfe_*
 	 * functions stop to work at some point during the boot, we should only
 	 * call them at the beginning of the boot.
+	 *
+	 * BCM47XX uses 128MB for addressing the ram, if the system contains
+	 * less that that amount of ram it remaps the ram more often into the
+	 * available space.
+	 * Accessing memory after 128MB will cause an exception.
+	 * max contains the biggest possible address supported by the platform.
+	 * If the method wants to try something above we assume 128MB ram.
 	 */
+	max = ((unsigned long)(prom_init) | ((128 << 20) - 1));
 	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
+		if (((unsigned long)(prom_init) + mem) > max) {
+			mem = (128 << 20);
+			printk(KERN_DEBUG "assume 128MB RAM\n");
+			break;
+		}
 		if (*(unsigned long *)((unsigned long)(prom_init) + mem) ==
 		    *(unsigned long *)(prom_init))
 			break;
 	}
 
-	/* Ignoring the last page when ddr size is 128M. Cached
-	 * accesses to last page is causing the processor to prefetch
-	 * using address above 128M stepping out of the ddr address
-	 * space.
-	 */
-	if (mem == 0x8000000)
-		mem -= 0x1000;
-
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index 00064b66080..6dfdc69928a 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -3,5 +3,3 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/bcm63xx/Platform b/arch/mips/bcm63xx/Platform
new file mode 100644
index 00000000000..5f86b2fff6d
--- /dev/null
+++ b/arch/mips/bcm63xx/Platform
@@ -0,0 +1,7 @@
+#
+# Broadcom BCM63XX boards
+#
+platform-$(CONFIG_BCM63XX)	+= bcm63xx/
+cflags-$(CONFIG_BCM63XX)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-bcm63xx/
+load-$(CONFIG_BCM63XX)		:= 0xffffffff80010000
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
index 4667a5f9280..f210b09ecec 100644
--- a/arch/mips/boot/.gitignore
+++ b/arch/mips/boot/.gitignore
@@ -3,3 +3,4 @@ elf2ecoff
 vmlinux.*
 zImage
 zImage.tmp
+calc_vmlinuz_load_addr
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
index e39a08edcaa..85bcb5adc7c 100644
--- a/arch/mips/boot/Makefile
+++ b/arch/mips/boot/Makefile
@@ -11,35 +11,32 @@
 # Some DECstations need all possible sections of an ECOFF executable
 #
 ifdef CONFIG_MACH_DECSTATION
-  E2EFLAGS = -a
-else
-  E2EFLAGS =
+  e2eflag := -a
 endif
 
 #
 # Drop some uninteresting sections in the kernel.
 # This is only relevant for ELF kernels but doesn't hurt a.out
 #
-drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-strip-flags	= $(addprefix --remove-section=,$(drop-sections))
-
-VMLINUX = vmlinux
-
-all: vmlinux.ecoff vmlinux.srec
-
-vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
-	$(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS)
-
-$(obj)/elf2ecoff: $(obj)/elf2ecoff.c
-	$(HOSTCC) -o $@ $^
-
-vmlinux.bin: $(VMLINUX)
-	$(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
-
-vmlinux.srec: $(VMLINUX)
-	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
-
-clean-files += elf2ecoff \
-	       vmlinux.bin \
-	       vmlinux.ecoff \
-	       vmlinux.srec
+drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags   := $(addprefix --remove-section=,$(drop-sections))
+
+hostprogs-y := elf2ecoff
+
+targets := vmlinux.ecoff
+quiet_cmd_ecoff = ECOFF   $@
+      cmd_ecoff = $(obj)/elf2ecoff $(VMLINUX) $@ $(e2eflag)
+$(obj)/vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) FORCE
+	$(call if_changed,ecoff)
+
+targets += vmlinux.bin
+quiet_cmd_bin = OBJCOPY $@
+      cmd_bin = $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $@
+$(obj)/vmlinux.bin: $(VMLINUX) FORCE
+	$(call if_changed,bin)
+
+targets += vmlinux.srec
+quiet_cmd_srec = OBJCOPY $@
+      cmd_srec = $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $@
+$(obj)/vmlinux.srec: $(VMLINUX) FORCE
+	$(call if_changed,srec)
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 790ddd39762..ed9bb709c9a 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -12,14 +12,6 @@
 # Author: Wu Zhangjin <wuzhangjin@gmail.com>
 #
 
-# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
-VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
-VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo -n $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
-# VMLINUZ_LOAD_ADDRESS = concat "high32 of VMLINUX_LOAD_ADDRESS" and "(low32 of VMLINUX_LOAD_ADDRESS) + VMLINUX_SIZE"
-HIGH32 := $(shell A=$(VMLINUX_LOAD_ADDRESS); [ $${\#A} -gt 10 ] && expr substr "$(VMLINUX_LOAD_ADDRESS)" 3 $$(($${\#A} - 10)))
-LOW32 := $(shell [ -n "$(HIGH32)" ] && A=11 || A=3; expr substr "$(VMLINUX_LOAD_ADDRESS)" $${A} 8)
-VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" -a -n "$(LOW32)" ] && printf "$(HIGH32)%08x" $$(($(VMLINUX_SIZE) + 0x$(LOW32))))
-
 # set the default size of the mallocing area for decompressing
 BOOT_HEAP_SIZE := 0x400000
 
@@ -33,49 +25,61 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
 
-obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+targets := head.o decompress.o dbg.o uart-16550.o uart-alchemy.o
+
+# decompressor objects (linked with vmlinuz)
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
 
 ifdef CONFIG_DEBUG_ZBOOT
-obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
-obj-$(CONFIG_MACH_ALCHEMY)		   += $(obj)/uart-alchemy.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
 endif
 
+targets += vmlinux.bin
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
-$(obj)/vmlinux.bin: $(KBUILD_IMAGE)
+$(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
 	$(call if_changed,objcopy)
 
-suffix_$(CONFIG_KERNEL_GZIP)  = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA)  = lzma
-suffix_$(CONFIG_KERNEL_LZO)   = lzo
 tool_$(CONFIG_KERNEL_GZIP)    = gzip
 tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
 tool_$(CONFIG_KERNEL_LZMA)    = lzma
 tool_$(CONFIG_KERNEL_LZO)     = lzo
-$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
+
+targets += vmlinux.bin.z
+$(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,$(tool_y))
 
-$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
-	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \
-		--add-section=.image=$< \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $@
+targets += piggy.o
+OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
+                        --set-section-flags=.image=contents,alloc,load,readonly,data
+$(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
+	$(call if_changed,objcopy)
+
+# Calculate the load address of the compressed kernel image
+hostprogs-y := calc_vmlinuz_load_addr
+
+VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
+		$(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
 
-LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
-vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
-	$(call if_changed,ld)
-	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@
+vmlinuzobjs-y += $(obj)/piggy.o
+
+quiet_cmd_zld = LD      $@
+      cmd_zld = $(LD) $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -s $@
+vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
+	$(call cmd,zld)
+	$(call cmd,strip)
 
 #
 # Some DECstations need all possible sections of an ECOFF executable
 #
 ifdef CONFIG_MACH_DECSTATION
-  E2EFLAGS = -a
-else
-  E2EFLAGS =
+  e2eflag := -a
 endif
 
 # elf2ecoff can only handle 32bit image
+hostprogs-y += ../elf2ecoff
 
 ifdef CONFIG_32BIT
 	VMLINUZ = vmlinuz
@@ -83,23 +87,22 @@ else
 	VMLINUZ = vmlinuz.32
 endif
 
+quiet_cmd_32 = OBJCOPY $@
+      cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 vmlinuz.32: vmlinuz
-	$(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+	$(call cmd,32)
 
+quiet_cmd_ecoff = ECOFF   $@
+      cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag)
 vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
-	$(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS)
-
-$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
-	$(Q)$(HOSTCC) -o $@ $^
+	$(call cmd,ecoff)
 
 OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
 vmlinuz.bin: vmlinuz
-	$(call if_changed,objcopy)
+	$(call cmd,objcopy)
 
 OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
 vmlinuz.srec: vmlinuz
-	$(call if_changed,objcopy)
+	$(call cmd,objcopy)
 
-clean:
-clean-files += *.o \
-	       vmlinu*
+clean-files := $(objtree)/vmlinuz.*
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
new file mode 100644
index 00000000000..88c9d963be8
--- /dev/null
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2010 "Wu Zhangjin" <wuzhangjin@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int main(int argc, char *argv[])
+{
+	struct stat sb;
+	uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
+
+	if (argc != 3) {
+		fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",
+				argv[0]);
+		return EXIT_FAILURE;
+	}
+
+	if (stat(argv[1], &sb) == -1) {
+		perror("stat");
+		return EXIT_FAILURE;
+	}
+
+	/* Convert hex characters to dec number */
+	errno = 0;
+	if (sscanf(argv[2], "%llx", &vmlinux_load_addr) != 1) {
+		if (errno != 0)
+			perror("sscanf");
+		else
+			fprintf(stderr, "No matching characters\n");
+
+		return EXIT_FAILURE;
+	}
+
+	vmlinux_size = (uint64_t)sb.st_size;
+	vmlinuz_load_addr = vmlinux_load_addr + vmlinux_size;
+
+	/*
+	 * Align with 16 bytes: "greater than that used for any standard data
+	 * types by a MIPS compiler." -- See MIPS Run Linux (Second Edition).
+	 */
+
+	vmlinuz_load_addr += (16 - vmlinux_size % 16);
+
+	printf("0x%llx\n", vmlinuz_load_addr);
+
+	return EXIT_SUCCESS;
+}
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
index 5db43c58b1b..5cad0faefa1 100644
--- a/arch/mips/boot/compressed/decompress.c
+++ b/arch/mips/boot/compressed/decompress.c
@@ -1,9 +1,6 @@
 /*
- * Misc. bootloader code for many machines.
- *
  * Copyright 2001 MontaVista Software Inc.
- * Author: Matt Porter <mporter@mvista.com> Derived from
- * arch/ppc/boot/prep/misc.c
+ * Author: Matt Porter <mporter@mvista.com>
  *
  * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
@@ -19,12 +16,12 @@
 
 #include <asm/addrspace.h>
 
-/* These two variables specify the free mem region
+/*
+ * These two variables specify the free mem region
  * that can be used for temporary malloc area
  */
 unsigned long free_mem_ptr;
 unsigned long free_mem_end_ptr;
-char *zimage_start;
 
 /* The linker tells us where the image is. */
 extern unsigned char __image_begin, __image_end;
@@ -83,38 +80,31 @@ void *memset(void *s, int c, size_t n)
 
 void decompress_kernel(unsigned long boot_heap_start)
 {
-	int zimage_size;
-
-	/*
-	 * We link ourself to an arbitrary low address.  When we run, we
-	 * relocate outself to that address.  __image_beign points to
-	 * the part of the image where the zImage is. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
+	unsigned long zimage_start, zimage_size;
+
+	zimage_start = (unsigned long)(&__image_begin);
 	zimage_size = (unsigned long)(&__image_end) -
 	    (unsigned long)(&__image_begin);
 
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
 	puts("zimage at:     ");
-	puthex((unsigned long)zimage_start);
+	puthex(zimage_start);
 	puts(" ");
-	puthex((unsigned long)(zimage_size + zimage_start));
+	puthex(zimage_size + zimage_start);
 	puts("\n");
 
-	/* this area are prepared for mallocing when decompressing */
+	/* This area are prepared for mallocing when decompressing */
 	free_mem_ptr = boot_heap_start;
 	free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
 
-	/* Display standard Linux/MIPS boot prompt for kernel args */
+	/* Display standard Linux/MIPS boot prompt */
 	puts("Uncompressing Linux at load address ");
 	puthex(VMLINUX_LOAD_ADDRESS_ULL);
 	puts("\n");
+
 	/* Decompress the kernel with according algorithm */
-	decompress(zimage_start, zimage_size, 0, 0,
+	decompress((char *)zimage_start, zimage_size, 0, 0,
 		   (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error);
-	/* FIXME: is there a need to flush cache here? */
+
+	/* FIXME: should we flush cache here? */
 	puts("Now, booting the kernel...\n");
 }
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
index 613a35b02f5..8e6b07ca2f5 100644
--- a/arch/mips/boot/compressed/ld.script
+++ b/arch/mips/boot/compressed/ld.script
@@ -2,61 +2,44 @@
  * ld.script for compressed kernel support of MIPS
  *
  * Copyright (C) 2009 Lemote Inc.
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhanjing@gmail.com>
+ * Copyright (C) 2010 "Wu Zhangjin" <wuzhanjing@gmail.com>
  */
 
 OUTPUT_ARCH(mips)
 ENTRY(start)
 SECTIONS
 {
-	/* . = VMLINUZ_LOAD_ADDRESS */
-	/* read-only */
-	_text = .;	/* Text and read-only data */
-	.text	: {
-		_ftext = . ;
+	/* Text and read-only data */
+	/* . = VMLINUZ_LOAD_ADDRESS; */
+	.text : {
 		*(.text)
 		*(.rodata)
-	} = 0
-	_etext = .;	/* End of text section */
+	}
+	/* End of text section */
 
-	/* writable */
-	.data	: {	/* Data */
-		_fdata = . ;
+	/* Writable data */
+	.data : {
 		*(.data)
-		/* Put the compressed image here, so bss is on the end. */
+		/* Put the compressed image here */
 		__image_begin = .;
 		*(.image)
 		__image_end = .;
 		CONSTRUCTORS
 	}
-	.sdata	: { *(.sdata) }
-	. = ALIGN(4);
-	_edata  =  .;	/* End of data section */
+	. = ALIGN(16);
+	_edata = .;
+	/* End of data section */
 
 	/* BSS */
-	__bss_start = .;
-	_fbss = .;
-	.sbss	: { *(.sbss) *(.scommon) }
-	.bss	: {
-		*(.dynbss)
+	.bss : {
 		*(.bss)
-		*(COMMON)
 	}
-	.  = ALIGN(4);
-	_end = . ;
-
-	/* These are needed for ELF backends which have not yet been converted
-	 * to the new style linker.  */
-
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-
-	/* These must appear regardless of  .  */
-	.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-	.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
+	. = ALIGN(16);
+	_end = .;
 
 	/* Sections to be discarded */
-	/DISCARD/	: {
+	/DISCARD/ : {
 		*(.MIPS.options)
 		*(.options)
 		*(.pdr)
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 3e9876317e6..19eb0434269 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -12,7 +12,6 @@
 obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
+obj-y += executive/
 
 obj-$(CONFIG_SMP)                     += smp.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cavium-octeon/Platform b/arch/mips/cavium-octeon/Platform
new file mode 100644
index 00000000000..1e43ccf1a79
--- /dev/null
+++ b/arch/mips/cavium-octeon/Platform
@@ -0,0 +1,11 @@
+#
+# Cavium Octeon
+#
+platform-$(CONFIG_CPU_CAVIUM_OCTEON)	+= cavium-octeon/
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON)	+=				\
+		-I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
+ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff84100000
+else
+load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff81100000
+endif
diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c
index b6df5387e85..c664c8cc2b4 100644
--- a/arch/mips/cavium-octeon/cpu.c
+++ b/arch/mips/cavium-octeon/cpu.c
@@ -41,12 +41,8 @@ static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
 	return NOTIFY_OK;		/* Let default notifier send signals */
 }
 
-static struct notifier_block cnmips_cu2_notifier = {
-	.notifier_call = cnmips_cu2_call,
-};
-
 static int cnmips_cu2_setup(void)
 {
-	return register_cu2_notifier(&cnmips_cu2_notifier);
+	return cu2_notifier(cnmips_cu2_call, 0);
 }
 early_initcall(cnmips_cu2_setup);
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 0bf4bbe04ae..b6847c8e0dd 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -53,7 +53,6 @@ static struct clocksource clocksource_mips = {
 unsigned long long notrace sched_clock(void)
 {
 	/* 64-bit arithmatic can overflow, so use 128-bit.  */
-#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3))
 	u64 t1, t2, t3;
 	unsigned long long rv;
 	u64 mult = clocksource_mips.mult;
@@ -73,13 +72,6 @@ unsigned long long notrace sched_clock(void)
 		: [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
 		: "hi", "lo");
 	return rv;
-#else
-	/* GCC > 4.3 do it the easy way.  */
-	unsigned int __attribute__((mode(TI))) t;
-	t = read_c0_cvmcount();
-	t = t * clocksource_mips.mult;
-	return (unsigned long long)(t >> clocksource_mips.shift);
-#endif
 }
 
 void __init plat_time_init(void)
@@ -88,3 +80,58 @@ void __init plat_time_init(void)
 	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
 	clocksource_register(&clocksource_mips);
 }
+
+static u64 octeon_udelay_factor;
+static u64 octeon_ndelay_factor;
+
+void __init octeon_setup_delays(void)
+{
+	octeon_udelay_factor = octeon_get_clock_rate() / 1000000;
+	/*
+	 * For __ndelay we divide by 2^16, so the factor is multiplied
+	 * by the same amount.
+	 */
+	octeon_ndelay_factor = (octeon_udelay_factor * 0x10000ull) / 1000ull;
+
+	preset_lpj = octeon_get_clock_rate() / HZ;
+}
+
+void __udelay(unsigned long us)
+{
+	u64 cur, end, inc;
+
+	cur = read_c0_cvmcount();
+
+	inc = us * octeon_udelay_factor;
+	end = cur + inc;
+
+	while (end > cur)
+		cur = read_c0_cvmcount();
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+	u64 cur, end, inc;
+
+	cur = read_c0_cvmcount();
+
+	inc = ((ns * octeon_ndelay_factor) >> 16);
+	end = cur + inc;
+
+	while (end > cur)
+		cur = read_c0_cvmcount();
+}
+EXPORT_SYMBOL(__ndelay);
+
+void __delay(unsigned long loops)
+{
+	u64 cur, end;
+
+	cur = read_c0_cvmcount();
+	end = cur + loops;
+
+	while (end > cur)
+		cur = read_c0_cvmcount();
+}
+EXPORT_SYMBOL(__delay);
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index be531ec1f20..d22b5a2d64f 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -99,13 +99,16 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
 			panic("dma_map_single: "
 			      "Attempt to map illegal memory address 0x%llx\n",
 			      physical);
-		else if ((physical + size >=
-			  (4ull<<30) - (OCTEON_PCI_BAR1_HOLE_SIZE<<20))
-			 && physical < (4ull<<30))
-			pr_warning("dma_map_single: Warning: "
-				   "Mapping memory address that might "
-				   "conflict with devices 0x%llx-0x%llx\n",
-				   physical, physical+size-1);
+		else if (physical >= CVMX_PCIE_BAR1_PHYS_BASE &&
+			 physical + size < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE)) {
+			result = physical - CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_RC_BASE;
+
+			if (((result+size-1) & dma_mask) != result+size-1)
+				panic("dma_map_single: Attempt to map address 0x%llx-0x%llx, which can't be accessed according to the dma mask 0x%llx\n",
+				      physical, physical+size-1, dma_mask);
+			goto done;
+		}
+
 		/* The 2nd 256MB is mapped at 256<<20 instead of 0x410000000 */
 		if ((physical >= 0x410000000ull) && physical < 0x420000000ull)
 			result = physical - 0x400000000ull;
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index c424cd158dc..ce7500cdf5b 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -3,15 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004-2008 Cavium Networks
+ * Copyright (C) 2004-2008, 2009, 2010 Cavium Networks
  */
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
 #include <asm/octeon/octeon.h>
-#include <asm/octeon/cvmx-pexp-defs.h>
-#include <asm/octeon/cvmx-npi-defs.h>
 
 static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock);
 static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock);
@@ -41,14 +39,14 @@ static void octeon_irq_core_ack(unsigned int irq)
 
 static void octeon_irq_core_eoi(unsigned int irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned int bit = irq - OCTEON_IRQ_SW0;
 	/*
 	 * If an IRQ is being processed while we are disabling it the
 	 * handler will attempt to unmask the interrupt after it has
 	 * been disabled.
 	 */
-	if (desc->status & IRQ_DISABLED)
+	if ((unlikely(desc->status & IRQ_DISABLED)))
 		return;
 	/*
 	 * We don't need to disable IRQs to make these atomic since
@@ -106,6 +104,29 @@ static struct irq_chip octeon_irq_chip_core = {
 
 static void octeon_irq_ciu0_ack(unsigned int irq)
 {
+	switch (irq) {
+	case OCTEON_IRQ_GMX_DRP0:
+	case OCTEON_IRQ_GMX_DRP1:
+	case OCTEON_IRQ_IPD_DRP:
+	case OCTEON_IRQ_KEY_ZERO:
+	case OCTEON_IRQ_TIMER0:
+	case OCTEON_IRQ_TIMER1:
+	case OCTEON_IRQ_TIMER2:
+	case OCTEON_IRQ_TIMER3:
+	{
+		int index = cvmx_get_core_num() * 2;
+		u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+		/*
+		 * CIU timer type interrupts must be acknoleged by
+		 * writing a '1' bit to their sum0 bit.
+		 */
+		cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
+		break;
+	}
+	default:
+		break;
+	}
+
 	/*
 	 * In order to avoid any locking accessing the CIU, we
 	 * acknowledge CIU interrupts by disabling all of them.  This
@@ -130,8 +151,54 @@ static void octeon_irq_ciu0_eoi(unsigned int irq)
 	set_c0_status(0x100 << 2);
 }
 
+static int next_coreid_for_irq(struct irq_desc *desc)
+{
+
+#ifdef CONFIG_SMP
+	int coreid;
+	int weight = cpumask_weight(desc->affinity);
+
+	if (weight > 1) {
+		int cpu = smp_processor_id();
+		for (;;) {
+			cpu = cpumask_next(cpu, desc->affinity);
+			if (cpu >= nr_cpu_ids) {
+				cpu = -1;
+				continue;
+			} else if (cpumask_test_cpu(cpu, cpu_online_mask)) {
+				break;
+			}
+		}
+		coreid = octeon_coreid_for_cpu(cpu);
+	} else if (weight == 1) {
+		coreid = octeon_coreid_for_cpu(cpumask_first(desc->affinity));
+	} else {
+		coreid = cvmx_get_core_num();
+	}
+	return coreid;
+#else
+	return cvmx_get_core_num();
+#endif
+}
+
 static void octeon_irq_ciu0_enable(unsigned int irq)
 {
+	struct irq_desc *desc = irq_to_desc(irq);
+	int coreid = next_coreid_for_irq(desc);
+	unsigned long flags;
+	uint64_t en0;
+	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
+
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
+	en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	en0 |= 1ull << bit;
+	cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
+	cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
+}
+
+static void octeon_irq_ciu0_enable_mbox(unsigned int irq)
+{
 	int coreid = cvmx_get_core_num();
 	unsigned long flags;
 	uint64_t en0;
@@ -167,63 +234,76 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 }
 
 /*
- * Enable the irq on the current core for chips that have the EN*_W1{S,C}
- * registers.
+ * Enable the irq on the next core in the affinity set for chips that
+ * have the EN*_W1{S,C} registers.
  */
 static void octeon_irq_ciu0_enable_v2(unsigned int irq)
 {
-	int index = cvmx_get_core_num() * 2;
+	int index;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+	struct irq_desc *desc = irq_to_desc(irq);
 
-	cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+	if ((desc->status & IRQ_DISABLED) == 0) {
+		index = next_coreid_for_irq(desc) * 2;
+		cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+	}
 }
 
 /*
- * Disable the irq on the current core for chips that have the EN*_W1{S,C}
- * registers.
+ * Enable the irq on the current CPU for chips that
+ * have the EN*_W1{S,C} registers.
  */
-static void octeon_irq_ciu0_ack_v2(unsigned int irq)
+static void octeon_irq_ciu0_enable_mbox_v2(unsigned int irq)
 {
-	int index = cvmx_get_core_num() * 2;
+	int index;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
 
-	cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
+	index = cvmx_get_core_num() * 2;
+	cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
 }
 
 /*
- * CIU timer type interrupts must be acknoleged by writing a '1' bit
- * to their sum0 bit.
+ * Disable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
  */
-static void octeon_irq_ciu0_timer_ack(unsigned int irq)
+static void octeon_irq_ciu0_ack_v2(unsigned int irq)
 {
 	int index = cvmx_get_core_num() * 2;
-	uint64_t mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
-	cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
-}
+	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
 
-static void octeon_irq_ciu0_timer_ack_v1(unsigned int irq)
-{
-	octeon_irq_ciu0_timer_ack(irq);
-	octeon_irq_ciu0_ack(irq);
-}
+	switch (irq) {
+	case OCTEON_IRQ_GMX_DRP0:
+	case OCTEON_IRQ_GMX_DRP1:
+	case OCTEON_IRQ_IPD_DRP:
+	case OCTEON_IRQ_KEY_ZERO:
+	case OCTEON_IRQ_TIMER0:
+	case OCTEON_IRQ_TIMER1:
+	case OCTEON_IRQ_TIMER2:
+	case OCTEON_IRQ_TIMER3:
+		/*
+		 * CIU timer type interrupts must be acknoleged by
+		 * writing a '1' bit to their sum0 bit.
+		 */
+		cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
+		break;
+	default:
+		break;
+	}
 
-static void octeon_irq_ciu0_timer_ack_v2(unsigned int irq)
-{
-	octeon_irq_ciu0_timer_ack(irq);
-	octeon_irq_ciu0_ack_v2(irq);
+	cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
 }
 
 /*
  * Enable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu0_eoi_v2(unsigned int irq)
+static void octeon_irq_ciu0_eoi_mbox_v2(unsigned int irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int index = cvmx_get_core_num() * 2;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
 
-	if ((desc->status & IRQ_DISABLED) == 0)
+	if (likely((desc->status & IRQ_DISABLED) == 0))
 		cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
 }
 
@@ -246,18 +326,30 @@ static void octeon_irq_ciu0_disable_all_v2(unsigned int irq)
 static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
+	struct irq_desc *desc = irq_to_desc(irq);
+	int enable_one = (desc->status & IRQ_DISABLED) == 0;
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
 
+	/*
+	 * For non-v2 CIU, we will allow only single CPU affinity.
+	 * This removes the need to do locking in the .ack/.eoi
+	 * functions.
+	 */
+	if (cpumask_weight(dest) != 1)
+		return -EINVAL;
+
 	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en0 =
 			cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
-		if (cpumask_test_cpu(cpu, dest))
+		if (cpumask_test_cpu(cpu, dest) && enable_one) {
+			enable_one = 0;
 			en0 |= 1ull << bit;
-		else
+		} else {
 			en0 &= ~(1ull << bit);
+		}
 		cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
 	}
 	/*
@@ -279,13 +371,18 @@ static int octeon_irq_ciu0_set_affinity_v2(unsigned int irq,
 {
 	int cpu;
 	int index;
+	struct irq_desc *desc = irq_to_desc(irq);
+	int enable_one = (desc->status & IRQ_DISABLED) == 0;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
 	for_each_online_cpu(cpu) {
 		index = octeon_coreid_for_cpu(cpu) * 2;
-		if (cpumask_test_cpu(cpu, dest))
+		if (cpumask_test_cpu(cpu, dest) && enable_one) {
+			enable_one = 0;
 			cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
-		else
+		} else {
 			cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
+		}
 	}
 	return 0;
 }
@@ -298,8 +395,7 @@ static struct irq_chip octeon_irq_chip_ciu0_v2 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu0_enable_v2,
 	.disable = octeon_irq_ciu0_disable_all_v2,
-	.ack = octeon_irq_ciu0_ack_v2,
-	.eoi = octeon_irq_ciu0_eoi_v2,
+	.eoi = octeon_irq_ciu0_enable_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
 #endif
@@ -309,36 +405,27 @@ static struct irq_chip octeon_irq_chip_ciu0 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu0_enable,
 	.disable = octeon_irq_ciu0_disable,
-	.ack = octeon_irq_ciu0_ack,
 	.eoi = octeon_irq_ciu0_eoi,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu0_set_affinity,
 #endif
 };
 
-static struct irq_chip octeon_irq_chip_ciu0_timer_v2 = {
-	.name = "CIU0-T",
-	.enable = octeon_irq_ciu0_enable_v2,
-	.disable = octeon_irq_ciu0_disable_all_v2,
-	.ack = octeon_irq_ciu0_timer_ack_v2,
-	.eoi = octeon_irq_ciu0_eoi_v2,
-#ifdef CONFIG_SMP
-	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
-#endif
+/* The mbox versions don't do any affinity or round-robin. */
+static struct irq_chip octeon_irq_chip_ciu0_mbox_v2 = {
+	.name = "CIU0-M",
+	.enable = octeon_irq_ciu0_enable_mbox_v2,
+	.disable = octeon_irq_ciu0_disable,
+	.eoi = octeon_irq_ciu0_eoi_mbox_v2,
 };
 
-static struct irq_chip octeon_irq_chip_ciu0_timer = {
-	.name = "CIU0-T",
-	.enable = octeon_irq_ciu0_enable,
+static struct irq_chip octeon_irq_chip_ciu0_mbox = {
+	.name = "CIU0-M",
+	.enable = octeon_irq_ciu0_enable_mbox,
 	.disable = octeon_irq_ciu0_disable,
-	.ack = octeon_irq_ciu0_timer_ack_v1,
 	.eoi = octeon_irq_ciu0_eoi,
-#ifdef CONFIG_SMP
-	.set_affinity = octeon_irq_ciu0_set_affinity,
-#endif
 };
 
-
 static void octeon_irq_ciu1_ack(unsigned int irq)
 {
 	/*
@@ -365,10 +452,30 @@ static void octeon_irq_ciu1_eoi(unsigned int irq)
 
 static void octeon_irq_ciu1_enable(unsigned int irq)
 {
-	int coreid = cvmx_get_core_num();
+	struct irq_desc *desc = irq_to_desc(irq);
+	int coreid = next_coreid_for_irq(desc);
+	unsigned long flags;
+	uint64_t en1;
+	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
+
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
+	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	en1 |= 1ull << bit;
+	cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
+	cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
+}
+
+/*
+ * Watchdog interrupts are special.  They are associated with a single
+ * core, so we hardwire the affinity to that core.
+ */
+static void octeon_irq_ciu1_wd_enable(unsigned int irq)
+{
 	unsigned long flags;
 	uint64_t en1;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
+	int coreid = bit;
 
 	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
@@ -405,36 +512,43 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
  */
 static void octeon_irq_ciu1_enable_v2(unsigned int irq)
 {
-	int index = cvmx_get_core_num() * 2 + 1;
+	int index;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+	struct irq_desc *desc = irq_to_desc(irq);
 
-	cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+	if ((desc->status & IRQ_DISABLED) == 0) {
+		index = next_coreid_for_irq(desc) * 2 + 1;
+		cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+	}
 }
 
 /*
- * Disable the irq on the current core for chips that have the EN*_W1{S,C}
- * registers.
+ * Watchdog interrupts are special.  They are associated with a single
+ * core, so we hardwire the affinity to that core.
  */
-static void octeon_irq_ciu1_ack_v2(unsigned int irq)
+static void octeon_irq_ciu1_wd_enable_v2(unsigned int irq)
 {
-	int index = cvmx_get_core_num() * 2 + 1;
+	int index;
+	int coreid = irq - OCTEON_IRQ_WDOG0;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+	struct irq_desc *desc = irq_to_desc(irq);
 
-	cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
+	if ((desc->status & IRQ_DISABLED) == 0) {
+		index = coreid * 2 + 1;
+		cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+	}
 }
 
 /*
- * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * Disable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu1_eoi_v2(unsigned int irq)
+static void octeon_irq_ciu1_ack_v2(unsigned int irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
 	int index = cvmx_get_core_num() * 2 + 1;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
 
-	if ((desc->status & IRQ_DISABLED) == 0)
-		cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
 }
 
 /*
@@ -457,19 +571,30 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq,
 					const struct cpumask *dest)
 {
 	int cpu;
+	struct irq_desc *desc = irq_to_desc(irq);
+	int enable_one = (desc->status & IRQ_DISABLED) == 0;
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
 
+	/*
+	 * For non-v2 CIU, we will allow only single CPU affinity.
+	 * This removes the need to do locking in the .ack/.eoi
+	 * functions.
+	 */
+	if (cpumask_weight(dest) != 1)
+		return -EINVAL;
+
 	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en1 =
-			cvmx_read_csr(CVMX_CIU_INTX_EN1
-				(coreid * 2 + 1));
-		if (cpumask_test_cpu(cpu, dest))
+			cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+		if (cpumask_test_cpu(cpu, dest) && enable_one) {
+			enable_one = 0;
 			en1 |= 1ull << bit;
-		else
+		} else {
 			en1 &= ~(1ull << bit);
+		}
 		cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
 	}
 	/*
@@ -491,13 +616,17 @@ static int octeon_irq_ciu1_set_affinity_v2(unsigned int irq,
 {
 	int cpu;
 	int index;
+	struct irq_desc *desc = irq_to_desc(irq);
+	int enable_one = (desc->status & IRQ_DISABLED) == 0;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
 	for_each_online_cpu(cpu) {
 		index = octeon_coreid_for_cpu(cpu) * 2 + 1;
-		if (cpumask_test_cpu(cpu, dest))
+		if (cpumask_test_cpu(cpu, dest) && enable_one) {
+			enable_one = 0;
 			cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
-		else
+		} else {
 			cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
+		}
 	}
 	return 0;
 }
@@ -507,11 +636,10 @@ static int octeon_irq_ciu1_set_affinity_v2(unsigned int irq,
  * Newer octeon chips have support for lockless CIU operation.
  */
 static struct irq_chip octeon_irq_chip_ciu1_v2 = {
-	.name = "CIU0",
+	.name = "CIU1",
 	.enable = octeon_irq_ciu1_enable_v2,
 	.disable = octeon_irq_ciu1_disable_all_v2,
-	.ack = octeon_irq_ciu1_ack_v2,
-	.eoi = octeon_irq_ciu1_eoi_v2,
+	.eoi = octeon_irq_ciu1_enable_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu1_set_affinity_v2,
 #endif
@@ -521,103 +649,36 @@ static struct irq_chip octeon_irq_chip_ciu1 = {
 	.name = "CIU1",
 	.enable = octeon_irq_ciu1_enable,
 	.disable = octeon_irq_ciu1_disable,
-	.ack = octeon_irq_ciu1_ack,
 	.eoi = octeon_irq_ciu1_eoi,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu1_set_affinity,
 #endif
 };
 
-#ifdef CONFIG_PCI_MSI
-
-static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
-
-static void octeon_irq_msi_ack(unsigned int irq)
-{
-	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		/* These chips have PCI */
-		cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
-			       1ull << (irq - OCTEON_IRQ_MSI_BIT0));
-	} else {
-		/*
-		 * These chips have PCIe. Thankfully the ACK doesn't
-		 * need any locking.
-		 */
-		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
-			       1ull << (irq - OCTEON_IRQ_MSI_BIT0));
-	}
-}
-
-static void octeon_irq_msi_eoi(unsigned int irq)
-{
-	/* Nothing needed */
-}
-
-static void octeon_irq_msi_enable(unsigned int irq)
-{
-	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		/*
-		 * Octeon PCI doesn't have the ability to mask/unmask
-		 * MSI interrupts individually.  Instead of
-		 * masking/unmasking them in groups of 16, we simple
-		 * assume MSI devices are well behaved.  MSI
-		 * interrupts are always enable and the ACK is assumed
-		 * to be enough.
-		 */
-	} else {
-		/* These chips have PCIe.  Note that we only support
-		 * the first 64 MSI interrupts.  Unfortunately all the
-		 * MSI enables are in the same register.  We use
-		 * MSI0's lock to control access to them all.
-		 */
-		uint64_t en;
-		unsigned long flags;
-		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
-		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
-		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
-		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
-	}
-}
-
-static void octeon_irq_msi_disable(unsigned int irq)
-{
-	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		/* See comment in enable */
-	} else {
-		/*
-		 * These chips have PCIe.  Note that we only support
-		 * the first 64 MSI interrupts.  Unfortunately all the
-		 * MSI enables are in the same register.  We use
-		 * MSI0's lock to control access to them all.
-		 */
-		uint64_t en;
-		unsigned long flags;
-		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
-		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
-		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
-		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
-	}
-}
+static struct irq_chip octeon_irq_chip_ciu1_wd_v2 = {
+	.name = "CIU1-W",
+	.enable = octeon_irq_ciu1_wd_enable_v2,
+	.disable = octeon_irq_ciu1_disable_all_v2,
+	.eoi = octeon_irq_ciu1_wd_enable_v2,
+};
 
-static struct irq_chip octeon_irq_chip_msi = {
-	.name = "MSI",
-	.enable = octeon_irq_msi_enable,
-	.disable = octeon_irq_msi_disable,
-	.ack = octeon_irq_msi_ack,
-	.eoi = octeon_irq_msi_eoi,
+static struct irq_chip octeon_irq_chip_ciu1_wd = {
+	.name = "CIU1-W",
+	.enable = octeon_irq_ciu1_wd_enable,
+	.disable = octeon_irq_ciu1_disable,
+	.eoi = octeon_irq_ciu1_eoi,
 };
-#endif
+
+static void (*octeon_ciu0_ack)(unsigned int);
+static void (*octeon_ciu1_ack)(unsigned int);
 
 void __init arch_init_irq(void)
 {
-	int irq;
+	unsigned int irq;
 	struct irq_chip *chip0;
-	struct irq_chip *chip0_timer;
+	struct irq_chip *chip0_mbox;
 	struct irq_chip *chip1;
+	struct irq_chip *chip1_wd;
 
 #ifdef CONFIG_SMP
 	/* Set the default affinity to the boot cpu. */
@@ -631,13 +692,19 @@ void __init arch_init_irq(void)
 	if (OCTEON_IS_MODEL(OCTEON_CN58XX_PASS2_X) ||
 	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
 	    OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) {
+		octeon_ciu0_ack = octeon_irq_ciu0_ack_v2;
+		octeon_ciu1_ack = octeon_irq_ciu1_ack_v2;
 		chip0 = &octeon_irq_chip_ciu0_v2;
-		chip0_timer = &octeon_irq_chip_ciu0_timer_v2;
+		chip0_mbox = &octeon_irq_chip_ciu0_mbox_v2;
 		chip1 = &octeon_irq_chip_ciu1_v2;
+		chip1_wd = &octeon_irq_chip_ciu1_wd_v2;
 	} else {
+		octeon_ciu0_ack = octeon_irq_ciu0_ack;
+		octeon_ciu1_ack = octeon_irq_ciu1_ack;
 		chip0 = &octeon_irq_chip_ciu0;
-		chip0_timer = &octeon_irq_chip_ciu0_timer;
+		chip0_mbox = &octeon_irq_chip_ciu0_mbox;
 		chip1 = &octeon_irq_chip_ciu1;
+		chip1_wd = &octeon_irq_chip_ciu1_wd;
 	}
 
 	/* 0 - 15 reserved for i8259 master and slave controller. */
@@ -651,34 +718,23 @@ void __init arch_init_irq(void)
 	/* 24 - 87 CIU_INT_SUM0 */
 	for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
 		switch (irq) {
-		case OCTEON_IRQ_GMX_DRP0:
-		case OCTEON_IRQ_GMX_DRP1:
-		case OCTEON_IRQ_IPD_DRP:
-		case OCTEON_IRQ_KEY_ZERO:
-		case OCTEON_IRQ_TIMER0:
-		case OCTEON_IRQ_TIMER1:
-		case OCTEON_IRQ_TIMER2:
-		case OCTEON_IRQ_TIMER3:
-			set_irq_chip_and_handler(irq, chip0_timer, handle_percpu_irq);
+		case OCTEON_IRQ_MBOX0:
+		case OCTEON_IRQ_MBOX1:
+			set_irq_chip_and_handler(irq, chip0_mbox, handle_percpu_irq);
 			break;
 		default:
-			set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+			set_irq_chip_and_handler(irq, chip0, handle_fasteoi_irq);
 			break;
 		}
 	}
 
 	/* 88 - 151 CIU_INT_SUM1 */
-	for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) {
-		set_irq_chip_and_handler(irq, chip1, handle_percpu_irq);
-	}
+	for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_WDOG15; irq++)
+		set_irq_chip_and_handler(irq, chip1_wd, handle_fasteoi_irq);
+
+	for (irq = OCTEON_IRQ_UART2; irq <= OCTEON_IRQ_RESERVED151; irq++)
+		set_irq_chip_and_handler(irq, chip1, handle_fasteoi_irq);
 
-#ifdef CONFIG_PCI_MSI
-	/* 152 - 215 PCI/PCIe MSI interrupts */
-	for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_BIT63; irq++) {
-		set_irq_chip_and_handler(irq, &octeon_irq_chip_msi,
-					 handle_percpu_irq);
-	}
-#endif
 	set_c0_status(0x300 << 2);
 }
 
@@ -693,6 +749,7 @@ asmlinkage void plat_irq_dispatch(void)
 	unsigned long cop0_status;
 	uint64_t ciu_en;
 	uint64_t ciu_sum;
+	unsigned int irq;
 
 	while (1) {
 		cop0_cause = read_c0_cause();
@@ -704,18 +761,24 @@ asmlinkage void plat_irq_dispatch(void)
 			ciu_sum = cvmx_read_csr(ciu_sum0_address);
 			ciu_en = cvmx_read_csr(ciu_en0_address);
 			ciu_sum &= ciu_en;
-			if (likely(ciu_sum))
-				do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WORKQ0 - 1);
-			else
+			if (likely(ciu_sum)) {
+				irq = fls64(ciu_sum) + OCTEON_IRQ_WORKQ0 - 1;
+				octeon_ciu0_ack(irq);
+				do_IRQ(irq);
+			} else {
 				spurious_interrupt();
+			}
 		} else if (unlikely(cop0_cause & STATUSF_IP3)) {
 			ciu_sum = cvmx_read_csr(ciu_sum1_address);
 			ciu_en = cvmx_read_csr(ciu_en1_address);
 			ciu_sum &= ciu_en;
-			if (likely(ciu_sum))
-				do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WDOG0 - 1);
-			else
+			if (likely(ciu_sum)) {
+				irq = fls64(ciu_sum) + OCTEON_IRQ_WDOG0 - 1;
+				octeon_ciu1_ack(irq);
+				do_IRQ(irq);
+			} else {
 				spurious_interrupt();
+			}
 		} else if (likely(cop0_cause)) {
 			do_IRQ(fls(cop0_cause) - 9 + MIPS_CPU_IRQ_BASE);
 		} else {
@@ -725,54 +788,84 @@ asmlinkage void plat_irq_dispatch(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu)
-{
-	unsigned int isset;
-	int coreid = octeon_coreid_for_cpu(cpu);
-	int bit = (irq < OCTEON_IRQ_WDOG0) ?
-		   irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0;
-       if (irq < 64) {
-		isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) &
-			(1ull << bit)) >> bit;
-       } else {
-	       isset = (cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)) &
-			(1ull << bit)) >> bit;
-       }
-       return isset;
-}
 
 void fixup_irqs(void)
 {
-       int irq;
+	int irq;
+	struct irq_desc *desc;
+	cpumask_t new_affinity;
+	unsigned long flags;
+	int do_set_affinity;
+	int cpu;
+
+	cpu = smp_processor_id();
 
 	for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++)
 		octeon_irq_core_disable_local(irq);
 
-	for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_GPIO15; irq++) {
-		if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
-			/* ciu irq migrates to next cpu */
-			octeon_irq_chip_ciu0.disable(irq);
-			octeon_irq_ciu0_set_affinity(irq, &cpu_online_map);
-		}
-	}
-
-#if 0
-	for (irq = OCTEON_IRQ_MBOX0; irq <= OCTEON_IRQ_MBOX1; irq++)
-		octeon_irq_mailbox_mask(irq);
-#endif
-	for (irq = OCTEON_IRQ_UART0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
-		if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
-			/* ciu irq migrates to next cpu */
-			octeon_irq_chip_ciu0.disable(irq);
-			octeon_irq_ciu0_set_affinity(irq, &cpu_online_map);
-		}
-	}
+	for (irq = OCTEON_IRQ_WORKQ0; irq < OCTEON_IRQ_LAST; irq++) {
+		desc = irq_to_desc(irq);
+		switch (irq) {
+		case OCTEON_IRQ_MBOX0:
+		case OCTEON_IRQ_MBOX1:
+			/* The eoi function will disable them on this CPU. */
+			desc->chip->eoi(irq);
+			break;
+		case OCTEON_IRQ_WDOG0:
+		case OCTEON_IRQ_WDOG1:
+		case OCTEON_IRQ_WDOG2:
+		case OCTEON_IRQ_WDOG3:
+		case OCTEON_IRQ_WDOG4:
+		case OCTEON_IRQ_WDOG5:
+		case OCTEON_IRQ_WDOG6:
+		case OCTEON_IRQ_WDOG7:
+		case OCTEON_IRQ_WDOG8:
+		case OCTEON_IRQ_WDOG9:
+		case OCTEON_IRQ_WDOG10:
+		case OCTEON_IRQ_WDOG11:
+		case OCTEON_IRQ_WDOG12:
+		case OCTEON_IRQ_WDOG13:
+		case OCTEON_IRQ_WDOG14:
+		case OCTEON_IRQ_WDOG15:
+			/*
+			 * These have special per CPU semantics and
+			 * are handled in the watchdog driver.
+			 */
+			break;
+		default:
+			raw_spin_lock_irqsave(&desc->lock, flags);
+			/*
+			 * If this irq has an action, it is in use and
+			 * must be migrated if it has affinity to this
+			 * cpu.
+			 */
+			if (desc->action && cpumask_test_cpu(cpu, desc->affinity)) {
+				if (cpumask_weight(desc->affinity) > 1) {
+					/*
+					 * It has multi CPU affinity,
+					 * just remove this CPU from
+					 * the affinity set.
+					 */
+					cpumask_copy(&new_affinity, desc->affinity);
+					cpumask_clear_cpu(cpu, &new_affinity);
+				} else {
+					/*
+					 * Otherwise, put it on lowest
+					 * numbered online CPU.
+					 */
+					cpumask_clear(&new_affinity);
+					cpumask_set_cpu(cpumask_first(cpu_online_mask), &new_affinity);
+				}
+				do_set_affinity = 1;
+			} else {
+				do_set_affinity = 0;
+			}
+			raw_spin_unlock_irqrestore(&desc->lock, flags);
+
+			if (do_set_affinity)
+				irq_set_affinity(irq, &new_affinity);
 
-	for (irq = OCTEON_IRQ_UART2; irq <= OCTEON_IRQ_RESERVED135; irq++) {
-		if (is_irq_enabled_on_cpu(irq, smp_processor_id())) {
-			/* ciu irq migrates to next cpu */
-			octeon_irq_chip_ciu1.disable(irq);
-			octeon_irq_ciu1_set_affinity(irq, &cpu_online_map);
+			break;
 		}
 	}
 }
diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h
index 0f7f84accf9..428864b2ba4 100644
--- a/arch/mips/cavium-octeon/octeon_boot.h
+++ b/arch/mips/cavium-octeon/octeon_boot.h
@@ -23,14 +23,16 @@
 #include <linux/types.h>
 
 struct boot_init_vector {
-	uint32_t stack_addr;
-	uint32_t code_addr;
+	/* First stage address - in ram instead of flash */
+	uint64_t code_addr;
+	/* Setup code for application, NOT application entry point */
 	uint32_t app_start_func_addr;
+	/* k0 is used for global data - needs to be passed to other cores */
 	uint32_t k0_val;
-	uint32_t flags;
-	uint32_t boot_info_addr;
+	/* Address of boot info block structure */
+	uint64_t boot_info_addr;
+	uint32_t flags;         /* flags */
 	uint32_t pad;
-	uint32_t pad2;
 };
 
 /* similar to bootloader's linux_app_boot_info but without global data */
@@ -40,7 +42,7 @@ struct linux_app_boot_info {
 	uint32_t avail_coremask;
 	uint32_t pci_console_active;
 	uint32_t icache_prefetch_disable;
-	uint32_t InitTLBStart_addr;
+	uint64_t InitTLBStart_addr;
 	uint32_t start_app_addr;
 	uint32_t cur_exception_base;
 	uint32_t no_mark_private_data;
@@ -58,7 +60,7 @@ struct linux_app_boot_info {
 
 #define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot"
 
-#define LABI_SIGNATURE 0xAABBCCDD
+#define LABI_SIGNATURE 0xAABBCC01
 
 /*  from uboot-headers/octeon_mem_map.h */
 #define EXCEPTION_BASE_INCR     (4 * 1024)
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
index 83eac37a1ff..638adab0284 100644
--- a/arch/mips/cavium-octeon/serial.c
+++ b/arch/mips/cavium-octeon/serial.c
@@ -18,11 +18,7 @@
 
 #include <asm/octeon/octeon.h>
 
-#ifdef CONFIG_GDB_CONSOLE
-#define DEBUG_UART 0
-#else
 #define DEBUG_UART 1
-#endif
 
 unsigned int octeon_serial_in(struct uart_port *up, int offset)
 {
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index d1b5ffaf028..69197cb6c7e 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -32,6 +32,7 @@
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>
+#include <asm/octeon/pci-octeon.h>
 
 #ifdef CONFIG_CAVIUM_DECODE_RSL
 extern void cvmx_interrupt_rsl_decode(void);
@@ -578,9 +579,6 @@ void __init prom_init(void)
 	}
 
 	if (strstr(arcs_cmdline, "console=") == NULL) {
-#ifdef CONFIG_GDB_CONSOLE
-		strcat(arcs_cmdline, " console=gdb");
-#else
 #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
 		strcat(arcs_cmdline, " console=ttyS0,115200");
 #else
@@ -589,7 +587,6 @@ void __init prom_init(void)
 		else
 			strcat(arcs_cmdline, " console=ttyS0,115200");
 #endif
-#endif
 	}
 
 	if (octeon_is_simulation()) {
@@ -598,13 +595,13 @@ void __init prom_init(void)
 		 * the filesystem. Also specify the calibration delay
 		 * to avoid calculating it every time.
 		 */
-		strcat(arcs_cmdline, " rw root=1f00"
-		       " lpj=60176 slram=root,0x40000000,+1073741824");
+		strcat(arcs_cmdline, " rw root=1f00 slram=root,0x40000000,+1073741824");
 	}
 
 	mips_hpt_frequency = octeon_get_clock_rate();
 
 	octeon_init_cvmcount();
+	octeon_setup_delays();
 
 	_machine_restart = octeon_restart;
 	_machine_halt = octeon_halt;
@@ -613,6 +610,22 @@ void __init prom_init(void)
 	register_smp_ops(&octeon_smp_ops);
 }
 
+/* Exclude a single page from the regions obtained in plat_mem_setup. */
+static __init void memory_exclude_page(u64 addr, u64 *mem, u64 *size)
+{
+	if (addr > *mem && addr < *mem + *size) {
+		u64 inc = addr - *mem;
+		add_memory_region(*mem, inc, BOOT_MEM_RAM);
+		*mem += inc;
+		*size -= inc;
+	}
+
+	if (addr == *mem && *size > PAGE_SIZE) {
+		*mem += PAGE_SIZE;
+		*size -= PAGE_SIZE;
+	}
+}
+
 void __init plat_mem_setup(void)
 {
 	uint64_t mem_alloc_size;
@@ -663,12 +676,27 @@ void __init plat_mem_setup(void)
 						CVMX_BOOTMEM_FLAG_NO_LOCKING);
 #endif
 		if (memory >= 0) {
+			u64 size = mem_alloc_size;
+
+			/*
+			 * exclude a page at the beginning and end of
+			 * the 256MB PCIe 'hole' so the kernel will not
+			 * try to allocate multi-page buffers that
+			 * span the discontinuity.
+			 */
+			memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE,
+					    &memory, &size);
+			memory_exclude_page(CVMX_PCIE_BAR1_PHYS_BASE +
+					    CVMX_PCIE_BAR1_PHYS_SIZE,
+					    &memory, &size);
+
 			/*
 			 * This function automatically merges address
 			 * regions next to each other if they are
 			 * received in incrementing order.
 			 */
-			add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
+			if (size)
+				add_memory_region(memory, size, BOOT_MEM_RAM);
 			total += mem_alloc_size;
 		} else {
 			break;
@@ -691,7 +719,10 @@ void __init plat_mem_setup(void)
 		      "cvmx_bootmem_phy_alloc\n");
 }
 
-
+/*
+ * Emit one character to the boot UART.  Exported for use by the
+ * watchdog timer.
+ */
 int prom_putchar(char c)
 {
 	uint64_t lsrval;
@@ -705,6 +736,7 @@ int prom_putchar(char c)
 	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
 	return 1;
 }
+EXPORT_SYMBOL(prom_putchar);
 
 void prom_free_prom_memory(void)
 {
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index 6d99b9d8887..391cefe556b 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2004-2008 Cavium Networks
+ * Copyright (C) 2004-2008, 2009, 2010 Cavium Networks
  */
 #include <linux/cpu.h>
 #include <linux/init.h>
@@ -27,7 +27,8 @@ volatile unsigned long octeon_processor_sp;
 volatile unsigned long octeon_processor_gp;
 
 #ifdef CONFIG_HOTPLUG_CPU
-static unsigned int InitTLBStart_addr;
+uint64_t octeon_bootloader_entry_addr;
+EXPORT_SYMBOL(octeon_bootloader_entry_addr);
 #endif
 
 static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
@@ -80,20 +81,13 @@ static inline void octeon_send_ipi_mask(const struct cpumask *mask,
 static void octeon_smp_hotplug_setup(void)
 {
 #ifdef CONFIG_HOTPLUG_CPU
-	uint32_t labi_signature;
-
-	labi_signature =
-		cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-					LABI_ADDR_IN_BOOTLOADER +
-					offsetof(struct linux_app_boot_info,
-						    labi_signature)));
-	if (labi_signature != LABI_SIGNATURE)
-		pr_err("The bootloader version on this board is incorrect\n");
-	InitTLBStart_addr =
-		cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-				   LABI_ADDR_IN_BOOTLOADER +
-					   offsetof(struct linux_app_boot_info,
-						    InitTLBStart_addr)));
+	struct linux_app_boot_info *labi;
+
+	labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
+	if (labi->labi_signature != LABI_SIGNATURE)
+		panic("The bootloader version on this board is incorrect.");
+
+	octeon_bootloader_entry_addr = labi->InitTLBStart_addr;
 #endif
 }
 
@@ -102,24 +96,47 @@ static void octeon_smp_setup(void)
 	const int coreid = cvmx_get_core_num();
 	int cpus;
 	int id;
-
 	int core_mask = octeon_get_boot_coremask();
+#ifdef CONFIG_HOTPLUG_CPU
+	unsigned int num_cores = cvmx_octeon_num_cores();
+#endif
+
+	/* The present CPUs are initially just the boot cpu (CPU 0). */
+	for (id = 0; id < NR_CPUS; id++) {
+		set_cpu_possible(id, id == 0);
+		set_cpu_present(id, id == 0);
+	}
 
-	cpus_clear(cpu_possible_map);
 	__cpu_number_map[coreid] = 0;
 	__cpu_logical_map[0] = coreid;
-	cpu_set(0, cpu_possible_map);
 
+	/* The present CPUs get the lowest CPU numbers. */
 	cpus = 1;
-	for (id = 0; id < 16; id++) {
+	for (id = 0; id < NR_CPUS; id++) {
 		if ((id != coreid) && (core_mask & (1 << id))) {
-			cpu_set(cpus, cpu_possible_map);
+			set_cpu_possible(cpus, true);
+			set_cpu_present(cpus, true);
 			__cpu_number_map[id] = cpus;
 			__cpu_logical_map[cpus] = id;
 			cpus++;
 		}
 	}
-	cpu_present_map = cpu_possible_map;
+
+#ifdef CONFIG_HOTPLUG_CPU
+	/*
+	 * The possible CPUs are all those present on the chip.  We
+	 * will assign CPU numbers for possible cores as well.  Cores
+	 * are always consecutively numberd from 0.
+	 */
+	for (id = 0; id < num_cores && id < NR_CPUS; id++) {
+		if (!(core_mask & (1 << id))) {
+			set_cpu_possible(cpus, true);
+			__cpu_number_map[id] = cpus;
+			__cpu_logical_map[cpus] = id;
+			cpus++;
+		}
+	}
+#endif
 
 	octeon_smp_hotplug_setup();
 }
@@ -158,18 +175,21 @@ static void octeon_init_secondary(void)
 {
 	const int coreid = cvmx_get_core_num();
 	union cvmx_ciu_intx_sum0 interrupt_enable;
+	unsigned int sr;
 
 #ifdef CONFIG_HOTPLUG_CPU
-	unsigned int cur_exception_base;
-
-	cur_exception_base = cvmx_read64_uint32(
-		CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-			     LABI_ADDR_IN_BOOTLOADER +
-			     offsetof(struct linux_app_boot_info,
-				      cur_exception_base)));
-	/* cur_exception_base is incremented in bootloader after setting */
-	write_c0_ebase((unsigned int)(cur_exception_base - EXCEPTION_BASE_INCR));
+	struct linux_app_boot_info *labi;
+
+	labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
+
+	if (labi->labi_signature != LABI_SIGNATURE)
+		panic("The bootloader version on this board is incorrect.");
 #endif
+
+	sr = set_c0_status(ST0_BEV);
+	write_c0_ebase((u32)ebase);
+	write_c0_status(sr);
+
 	octeon_check_cpu_bist();
 	octeon_init_cvmcount();
 	/*
@@ -276,8 +296,8 @@ static int octeon_cpu_disable(void)
 static void octeon_cpu_die(unsigned int cpu)
 {
 	int coreid = cpu_logical_map(cpu);
-	uint32_t avail_coremask;
-	struct cvmx_bootmem_named_block_desc *block_desc;
+	uint32_t mask, new_mask;
+	const struct cvmx_bootmem_named_block_desc *block_desc;
 
 	while (per_cpu(cpu_state, cpu) != CPU_DEAD)
 		cpu_relax();
@@ -286,52 +306,40 @@ static void octeon_cpu_die(unsigned int cpu)
 	 * This is a bit complicated strategics of getting/settig available
 	 * cores mask, copied from bootloader
 	 */
+
+	mask = 1 << coreid;
 	/* LINUX_APP_BOOT_BLOCK is initialized in bootoct binary */
 	block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME);
 
 	if (!block_desc) {
-		avail_coremask =
-			cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						   LABI_ADDR_IN_BOOTLOADER +
-						   offsetof
-						   (struct linux_app_boot_info,
-						    avail_coremask)));
-	} else {		       /* alternative, already initialized */
-	       avail_coremask =
-		   cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						   block_desc->base_addr +
-						  AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK));
-	}
+		struct linux_app_boot_info *labi;
 
-	avail_coremask |= 1 << coreid;
+		labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
 
-	/* Setting avail_coremask for bootoct binary */
-	if (!block_desc) {
-		cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						LABI_ADDR_IN_BOOTLOADER +
-						offsetof(struct linux_app_boot_info,
-							 avail_coremask)),
-				   avail_coremask);
-	} else {
-		cvmx_write64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						block_desc->base_addr +
-						AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK),
-				   avail_coremask);
+		labi->avail_coremask |= mask;
+		new_mask = labi->avail_coremask;
+	} else {		       /* alternative, already initialized */
+		uint32_t *p = (uint32_t *)PHYS_TO_XKSEG_CACHED(block_desc->base_addr +
+							       AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK);
+		*p |= mask;
+		new_mask = *p;
 	}
 
-	pr_info("Reset core %d. Available Coremask = %x\n", coreid,
-		avail_coremask);
+	pr_info("Reset core %d. Available Coremask = 0x%x \n", coreid, new_mask);
+	mb();
 	cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 0);
 }
 
 void play_dead(void)
 {
-	int coreid = cvmx_get_core_num();
+	int cpu = cpu_number_map(cvmx_get_core_num());
 
 	idle_task_exit();
 	octeon_processor_boot = 0xff;
-	per_cpu(cpu_state, coreid) = CPU_DEAD;
+	per_cpu(cpu_state, cpu) = CPU_DEAD;
+
+	mb();
 
 	while (1)	/* core will be reset here */
 		;
@@ -344,29 +352,27 @@ static void start_after_reset(void)
 	kernel_entry(0, 0, 0);  /* set a2 = 0 for secondary core */
 }
 
-int octeon_update_boot_vector(unsigned int cpu)
+static int octeon_update_boot_vector(unsigned int cpu)
 {
 
 	int coreid = cpu_logical_map(cpu);
-	unsigned int avail_coremask;
-	struct cvmx_bootmem_named_block_desc *block_desc;
+	uint32_t avail_coremask;
+	const struct cvmx_bootmem_named_block_desc *block_desc;
 	struct boot_init_vector *boot_vect =
-		(struct boot_init_vector *) cvmx_phys_to_ptr(0x0 +
-						  BOOTLOADER_BOOT_VECTOR);
+		(struct boot_init_vector *)PHYS_TO_XKSEG_CACHED(BOOTLOADER_BOOT_VECTOR);
 
 	block_desc = cvmx_bootmem_find_named_block(LINUX_APP_BOOT_BLOCK_NAME);
 
 	if (!block_desc) {
-		avail_coremask =
-			cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-					   LABI_ADDR_IN_BOOTLOADER +
-						offsetof(struct linux_app_boot_info,
-						avail_coremask)));
+		struct linux_app_boot_info *labi;
+
+		labi = (struct linux_app_boot_info *)PHYS_TO_XKSEG_CACHED(LABI_ADDR_IN_BOOTLOADER);
+
+		avail_coremask = labi->avail_coremask;
+		labi->avail_coremask &= ~(1 << coreid);
 	} else {		       /* alternative, already initialized */
-	       avail_coremask =
-		   cvmx_read64_uint32(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
-						   block_desc->base_addr +
-						   AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK));
+		avail_coremask = *(uint32_t *)PHYS_TO_XKSEG_CACHED(
+			block_desc->base_addr + AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK);
 	}
 
 	if (!(avail_coremask & (1 << coreid))) {
@@ -377,9 +383,9 @@ int octeon_update_boot_vector(unsigned int cpu)
 
 	boot_vect[coreid].app_start_func_addr =
 		(uint32_t) (unsigned long) start_after_reset;
-	boot_vect[coreid].code_addr = InitTLBStart_addr;
+	boot_vect[coreid].code_addr = octeon_bootloader_entry_addr;
 
-	CVMX_SYNC;
+	mb();
 
 	cvmx_write_csr(CVMX_CIU_NMI, (1 << coreid) & avail_coremask);
 
@@ -405,17 +411,11 @@ static int __cpuinit octeon_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata octeon_cpu_notifier = {
-	.notifier_call = octeon_cpu_callback,
-};
-
 static int __cpuinit register_cavium_notifier(void)
 {
-	register_hotcpu_notifier(&octeon_cpu_notifier);
-
+	hotcpu_notifier(octeon_cpu_callback, 0);
 	return 0;
 }
-
 late_initcall(register_cavium_notifier);
 
 #endif  /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 237926288d6..61a334ac43a 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -7,5 +7,3 @@ obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= mtd.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/cobalt/Platform b/arch/mips/cobalt/Platform
new file mode 100644
index 00000000000..34123efd6df
--- /dev/null
+++ b/arch/mips/cobalt/Platform
@@ -0,0 +1,6 @@
+#
+# Cobalt Server
+#
+platform-$(CONFIG_MIPS_COBALT)	+= cobalt/
+cflags-$(CONFIG_MIPS_COBALT)	+= -I$(srctree)/arch/mips/include/asm/mach-cobalt
+load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index f66d406aadc..3a9ec6ccd40 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1000=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index abb9a5805ad..4589b84301f 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 991c20adf47..9950f2aabd3 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1200=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 5424c9167bf..346ae631d1e 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 949b6dcf634..10eafb942af 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
new file mode 100644
index 00000000000..17e2e624d03
--- /dev/null
+++ b/arch/mips/configs/gpr_defconfig
@@ -0,0 +1,2060 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.35-rc6
+# Fri Jul 23 19:28:52 2010
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_MIPS_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_MIPS_GPR=y
+CONFIG_SOC_AU1550=y
+CONFIG_LOONGSON_UART_BASE=y
+# CONFIG_LOONGSON_MC146818 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+
+#
+# Xtables combined modules
+#
+CONFIG_NETFILTER_XT_MARK=m
+
+#
+# Xtables targets
+#
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+
+#
+# Xtables matches
+#
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# DECnet: Netfilter Configuration
+#
+CONFIG_DECNET_NF_GRABULATOR=m
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=y
+CONFIG_ATM_CLIP=y
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+# CONFIG_L2TP is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
+CONFIG_DECNET=m
+# CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+CONFIG_X25=m
+CONFIG_LAPB=m
+CONFIG_ECONET=m
+CONFIG_ECONET_AUNUDP=y
+CONFIG_ECONET_NATIVE=y
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_MULTIQ is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=m
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+CONFIG_TIFM_CORE=m
+CONFIG_TIFM_7XX1=m
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=m
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+CONFIG_ATH_COMMON=y
+CONFIG_ATH_DEBUG=y
+CONFIG_ATH5K=y
+CONFIG_ATH5K_DEBUG=y
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_WAN=y
+CONFIG_LANMEDIA=m
+CONFIG_HDLC=m
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
+CONFIG_PCI200SYN=m
+CONFIG_WANXL=m
+# CONFIG_PC300TOO is not set
+CONFIG_FARSYNC=m
+CONFIG_DSCC4=m
+CONFIG_DSCC4_PCISYNC=y
+CONFIG_DSCC4_PCI_RST=y
+CONFIG_DLCI=m
+CONFIG_DLCI_MAX=8
+CONFIG_WAN_ROUTER_DRIVERS=m
+CONFIG_CYCLADES_SYNC=m
+CONFIG_CYCLOMX_X25=y
+CONFIG_LAPBETHER=m
+CONFIG_X25_ASY=m
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+CONFIG_ATM_FIRESTREAM=m
+CONFIG_ATM_ZATM=m
+# CONFIG_ATM_ZATM_DEBUG is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+CONFIG_ATM_AMBASSADOR=m
+# CONFIG_ATM_AMBASSADOR_DEBUG is not set
+CONFIG_ATM_HORIZON=m
+# CONFIG_ATM_HORIZON_DEBUG is not set
+CONFIG_ATM_IA=m
+# CONFIG_ATM_IA_DEBUG is not set
+CONFIG_ATM_FORE200E=m
+# CONFIG_ATM_FORE200E_USE_TASKLET is not set
+CONFIG_ATM_FORE200E_TX_RETRY=16
+CONFIG_ATM_FORE200E_DEBUG=0
+CONFIG_ATM_HE=m
+CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_AU1550 is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+# CONFIG_GPIO_RDC321X is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+CONFIG_SENSORS_LM83=y
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_MFD_SUPPORT=y
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+CONFIG_USB_SERIAL_SIERRAWIRELESS=y
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_SPINLOCK_TEST is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index cff8f4c0e57..10d20aa731d 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_MTX1=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 97382b698b9..778f726af8e 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1100=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig
index e9ad77320f1..0f908c69211 100644
--- a/arch/mips/configs/pb1200_defconfig
+++ b/arch/mips/configs/pb1200_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_PB1200=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1200=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 7497d3306b9..1c5fe6f06c0 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index aa526f53cb1..49494b01138 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS=y
 #
 # Machine selection
 #
-CONFIG_MACH_ALCHEMY=y
+CONFIG_MIPS_ALCHEMY=y
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
@@ -64,7 +64,6 @@ CONFIG_ALCHEMY_GPIOINT_AU1000=y
 CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1550=y
-CONFIG_SOC_AU1X00=y
 CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
index 7291633d81c..af0ab73bfce 100644
--- a/arch/mips/configs/powertv_defconfig
+++ b/arch/mips/configs/powertv_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Fri Aug 28 14:49:33 2009
+# Linux kernel version: 2.6.35-rc3
+# Thu Jul  1 11:03:28 2010
 #
 CONFIG_MIPS=y
 
@@ -11,11 +11,12 @@ CONFIG_MIPS=y
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -50,7 +51,6 @@ CONFIG_POWERTV=y
 # CONFIG_MIN_RUNTIME_RESOURCES is not set
 # CONFIG_BOOTLOADER_DRIVER is not set
 CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_CSRC_POWERTV=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -65,9 +65,9 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_POWERTV=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
@@ -79,7 +79,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -122,7 +123,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
 CONFIG_CPU_MIPSR2_IRQ_EI=y
 CONFIG_CPU_HAS_SYNC=y
@@ -144,8 +145,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
@@ -177,6 +177,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE="mips-linux-"
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
@@ -190,19 +191,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
@@ -211,6 +208,7 @@ CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_RD_GZIP is not set
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -234,18 +232,16 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 
 #
@@ -253,7 +249,7 @@ CONFIG_HAVE_OPROFILE=y
 #
 # CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -271,15 +267,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -289,7 +311,6 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
@@ -318,7 +339,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -390,12 +410,26 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+
+#
+# Xtables targets
+#
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+
+#
+# Xtables matches
+#
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
@@ -465,10 +499,13 @@ CONFIG_IP6_NF_FILTER=y
 # CONFIG_IP6_NF_RAW is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+# CONFIG_L2TP is not set
 CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -526,10 +563,21 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
 
 #
 # Device Drivers
@@ -539,6 +587,7 @@ CONFIG_NET_SCH_FIFO=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -550,9 +599,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -568,6 +617,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
 # CONFIG_MTD_OOPS is not set
 
 #
@@ -611,11 +661,16 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_SM_COMMON is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
 CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_RICOH is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -641,6 +696,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -658,6 +717,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -693,64 +753,95 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
 # CONFIG_SATA_SIL24 is not set
 CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
 # CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
 # CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
 # CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -763,7 +854,7 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -787,6 +878,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -800,6 +892,7 @@ CONFIG_MII=y
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -829,6 +922,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
@@ -841,16 +936,12 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -864,6 +955,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -873,6 +965,7 @@ CONFIG_USB_RTL8150=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -882,6 +975,7 @@ CONFIG_USB_RTL8150=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -913,6 +1007,7 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
 # CONFIG_NOZOMI is not set
 
 #
@@ -924,6 +1019,9 @@ CONFIG_INPUT_EVDEV=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -934,6 +1032,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
 
@@ -945,7 +1044,6 @@ CONFIG_DEVPORT=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -953,20 +1051,14 @@ CONFIG_SSB_POSSIBLE=y
 # Sonics Silicon Backplane
 #
 # CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_SUPPORT is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -980,7 +1072,6 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -993,31 +1084,43 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
+# CONFIG_HID_3M_PCT is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
 # CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
 # CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
 # CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
 # CONFIG_HID_PANTHERLORD is not set
 # CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
 # CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
 # CONFIG_HID_THRUSTMASTER is not set
 # CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1032,7 +1135,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
@@ -1050,6 +1152,7 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1133,6 +1236,7 @@ CONFIG_USB_SERIAL_CP210X=y
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
 # CONFIG_USB_SERIAL_QUALCOMM is not set
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1146,6 +1250,8 @@ CONFIG_USB_SERIAL_CP210X=y
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1158,7 +1264,6 @@ CONFIG_USB_SERIAL_CP210X=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1171,7 +1276,6 @@ CONFIG_USB_SERIAL_CP210X=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1189,10 +1293,6 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 # CONFIG_STAGING is not set
 
 #
@@ -1214,6 +1314,7 @@ CONFIG_JBD=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1274,6 +1375,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1284,7 +1386,6 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1299,6 +1400,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1360,6 +1462,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1393,15 +1496,25 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
@@ -1410,19 +1523,22 @@ CONFIG_FTRACE=y
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
+# CONFIG_EARLY_PRINTK is not set
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M"
+CONFIG_CMDLINE=""
 # CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
@@ -1430,13 +1546,16 @@ CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1479,11 +1598,13 @@ CONFIG_CRYPTO_CBC=y
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/mips/dec/Makefile b/arch/mips/dec/Makefile
index c530208ee15..9eb2f9c036a 100644
--- a/arch/mips/dec/Makefile
+++ b/arch/mips/dec/Makefile
@@ -8,5 +8,3 @@ obj-y		:= ecc-berr.o int-handler.o ioasic-irq.o kn01-berr.o \
 obj-$(CONFIG_PROM_CONSOLE)	+= promcon.o
 obj-$(CONFIG_TC)		+= tc.o
 obj-$(CONFIG_CPU_HAS_WB)	+= wbflush.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/dec/Platform b/arch/mips/dec/Platform
new file mode 100644
index 00000000000..3adbcbd95db
--- /dev/null
+++ b/arch/mips/dec/Platform
@@ -0,0 +1,8 @@
+#
+# DECstation family
+#
+platform-$(CONFIG_MACH_DECSTATION)	= dec/
+cflags-$(CONFIG_MACH_DECSTATION)	+= \
+			-I$(srctree)/arch/mips/include/asm/mach-dec
+libs-$(CONFIG_MACH_DECSTATION)		+= arch/mips/dec/prom/
+load-$(CONFIG_MACH_DECSTATION)		+= 0xffffffff80040000
diff --git a/arch/mips/dec/promcon.c b/arch/mips/dec/promcon.c
index 9f0972f5a70..c239c25b79f 100644
--- a/arch/mips/dec/promcon.c
+++ b/arch/mips/dec/promcon.c
@@ -33,8 +33,7 @@ static int __init prom_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct console sercons =
-{
+static struct console sercons = {
 	.name	= "ttyS",
 	.write	= prom_console_write,
 	.setup	= prom_console_setup,
diff --git a/arch/mips/emma/Makefile b/arch/mips/emma/Makefile
new file mode 100644
index 00000000000..4254a31edb0
--- /dev/null
+++ b/arch/mips/emma/Makefile
@@ -0,0 +1,6 @@
+obj-$(CONFIG_SOC_EMMA2RH)	+= common/
+
+#
+# NEC EMMA2RH Mark-eins
+#
+obj-$(CONFIG_NEC_MARKEINS)	+= markeins/
diff --git a/arch/mips/emma/Platform b/arch/mips/emma/Platform
new file mode 100644
index 00000000000..0282f7f99b8
--- /dev/null
+++ b/arch/mips/emma/Platform
@@ -0,0 +1,4 @@
+platform-$(CONFIG_SOC_EMMA2RH)	+= emma/
+cflags-$(CONFIG_SOC_EMMA2RH)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-emma2rh
+load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
diff --git a/arch/mips/emma/markeins/irq.c b/arch/mips/emma/markeins/irq.c
index 9504b7ee0b7..3a96799eb65 100644
--- a/arch/mips/emma/markeins/irq.c
+++ b/arch/mips/emma/markeins/irq.c
@@ -301,7 +301,7 @@ void __init arch_init_irq(void)
 	/* setup cascade interrupts */
 	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
 	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
-	setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
+	setup_irq(MIPS_CPU_IRQ_BASE + 2, &irq_cascade);
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -309,13 +309,13 @@ asmlinkage void plat_irq_dispatch(void)
         unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & STATUSF_IP7)
-		do_IRQ(CPU_IRQ_BASE + 7);
+		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & STATUSF_IP2)
 		emma2rh_irq_dispatch();
 	else if (pending & STATUSF_IP1)
-		do_IRQ(CPU_IRQ_BASE + 1);
+		do_IRQ(MIPS_CPU_IRQ_BASE + 1);
 	else if (pending & STATUSF_IP0)
-		do_IRQ(CPU_IRQ_BASE + 0);
+		do_IRQ(MIPS_CPU_IRQ_BASE + 0);
 	else
 		spurious_interrupt();
 }
diff --git a/arch/mips/emma/markeins/setup.c b/arch/mips/emma/markeins/setup.c
index 9b3f51e5f14..feceebcfff4 100644
--- a/arch/mips/emma/markeins/setup.c
+++ b/arch/mips/emma/markeins/setup.c
@@ -52,7 +52,6 @@ static void markeins_machine_halt(void)
 
 static void markeins_machine_power_off(void)
 {
-	printk("EMMA2RH Mark-eins halted. Please turn off the power.\n");
 	markeins_led("poweroff.");
 	while (1) ;
 }
diff --git a/arch/mips/include/asm/arch_hweight.h b/arch/mips/include/asm/arch_hweight.h
new file mode 100644
index 00000000000..712a7445ee9
--- /dev/null
+++ b/arch/mips/include/asm/arch_hweight.h
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef _ASM_ARCH_HWEIGHT_H
+#define _ASM_ARCH_HWEIGHT_H
+
+#ifdef ARCH_HAS_USABLE_BUILTIN_POPCOUNT
+
+#include <asm/types.h>
+
+static inline unsigned int __arch_hweight32(unsigned int w)
+{
+	return __builtin_popcount(w);
+}
+
+static inline unsigned int __arch_hweight16(unsigned int w)
+{
+	return __builtin_popcount(w & 0xffff);
+}
+
+static inline unsigned int __arch_hweight8(unsigned int w)
+{
+	return __builtin_popcount(w & 0xff);
+}
+
+static inline unsigned long __arch_hweight64(__u64 w)
+{
+	return __builtin_popcountll(w);
+}
+
+#else
+#include <asm-generic/bitops/arch_hweight.h>
+#endif
+
+#endif /* _ASM_ARCH_HWEIGHT_H */
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 9255cfbee45..b0ce7ca2851 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -700,7 +700,10 @@ static inline int ffs(int word)
 #ifdef __KERNEL__
 
 #include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
+
+#include <asm/arch_hweight.h>
+#include <asm-generic/bitops/const_hweight.h>
+
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/ext2-atomic.h>
 #include <asm-generic/bitops/minix.h>
diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index 09eee09780f..15a8ef0707c 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -71,6 +71,12 @@
 #define MACH_LEMOTE_LL2F       7
 #define MACH_LOONGSON_END      8
 
+/*
+ * Valid machtype for group INGENIC
+ */
+#define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
+#define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
+
 extern char *system_type;
 const char *get_system_type(void);
 
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
index 44437ed765e..9161e684cb4 100644
--- a/arch/mips/include/asm/break.h
+++ b/arch/mips/include/asm/break.h
@@ -30,6 +30,8 @@
 #define BRK_BUG		512	/* Used by BUG() */
 #define BRK_KDB		513	/* Used in KDB_ENTER() */
 #define BRK_MEMU	514	/* Used by FPU emulator */
+#define BRK_KPROBE_BP	515	/* Kprobe break */
+#define BRK_KPROBE_SSTEPBP 516	/* Kprobe single step software implementation */
 #define BRK_MULOVF	1023	/* Multiply overflow */
 
 #endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 256ad2cc6eb..8f99c11ab66 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -62,6 +62,8 @@
  * RM7000-specific cacheops
  */
 #define Page_Invalidate_T	0x16
+#define Index_Store_Tag_T	0x0a
+#define Index_Load_Tag_T	0x06
 
 /*
  * R10000-specific cacheops
diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
index 6b04c98b7fa..2cb2f0c2c4f 100644
--- a/arch/mips/include/asm/cop2.h
+++ b/arch/mips/include/asm/cop2.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_COP2_H
 #define __ASM_COP2_H
 
+#include <linux/notifier.h>
+
 enum cu2_ops {
 	CU2_EXCEPTION,
 	CU2_LWC2_OP,
@@ -20,4 +22,14 @@ enum cu2_ops {
 extern int register_cu2_notifier(struct notifier_block *nb);
 extern int cu2_notifier_call_chain(unsigned long val, void *v);
 
+#define cu2_notifier(fn, pri)						\
+({									\
+	static struct notifier_block fn##_nb __cpuinitdata = {		\
+		.notifier_call = fn,					\
+		.priority = pri						\
+	};								\
+									\
+	register_cu2_notifier(&fn##_nb);				\
+})
+
 #endif /* __ASM_COP2_H */
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index ac73cede3a0..ca400f7c3f5 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -159,7 +159,8 @@
 
 /*
  * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
- * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  The IDT RC64574 is 64-bit and
+ * has CLO and CLZ but not DCLO nor DCLZ.  For 64-bit kernels
  * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
  */
 # ifndef cpu_has_clo_clz
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index a5acda41694..b201a8f5b12 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -34,7 +34,7 @@
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
 #define PRID_COMP_CAVIUM	0x0d0000
-
+#define PRID_COMP_INGENIC	0xd00000
 
 /*
  * Assigned values for the product ID register.  In order to detect a
@@ -133,6 +133,12 @@
 #define PRID_IMP_CAVIUM_CN52XX 0x0700
 
 /*
+ * These are the PRID's for when 23:16 == PRID_COMP_INGENIC
+ */
+
+#define PRID_IMP_JZRISC        0x0200
+
+/*
  * Definitions for 7:0 on legacy processors
  */
 
@@ -219,6 +225,7 @@ enum cpu_type_enum {
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
 	CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
+	CPU_JZRISC,
 
 	/*
 	 * MIPS64 class processors
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index ea77a42c5f8..fd1d39eb743 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -372,4 +372,9 @@ extern const char *__elf_platform;
 struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 				       int uses_interp);
+
+struct mm_struct;
+extern unsigned long arch_randomize_brk(struct mm_struct *mm);
+#define arch_randomize_brk arch_randomize_brk
+
 #endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/emma/emma2rh.h b/arch/mips/include/asm/emma/emma2rh.h
index 2afb2fe11b3..c1449d20ef0 100644
--- a/arch/mips/include/asm/emma/emma2rh.h
+++ b/arch/mips/include/asm/emma/emma2rh.h
@@ -99,88 +99,22 @@
 #define EMMA2RH_PCI_CONFIG_BASE	EMMA2RH_PCI_IO_BASE
 #define EMMA2RH_PCI_CONFIG_SIZE	EMMA2RH_PCI_IO_SIZE
 
-#define NUM_CPU_IRQ		8
 #define NUM_EMMA2RH_IRQ		96
 
-#define CPU_EMMA2RH_CASCADE	2
-#define CPU_IRQ_BASE		MIPS_CPU_IRQ_BASE
-#define EMMA2RH_IRQ_BASE	(CPU_IRQ_BASE + NUM_CPU_IRQ)
+#define EMMA2RH_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 
 /*
  * emma2rh irq defs
  */
 
-#define EMMA2RH_IRQ_INT0	(0 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT1	(1 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT2	(2 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT3	(3 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT4	(4 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT5	(5 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT6	(6 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT7	(7 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT8	(8 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT9	(9 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT10	(10 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT11	(11 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT12	(12 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT13	(13 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT14	(14 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT15	(15 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT16	(16 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT17	(17 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT18	(18 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT19	(19 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT20	(20 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT21	(21 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT22	(22 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT23	(23 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT24	(24 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT25	(25 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT26	(26 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT27	(27 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT28	(28 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT29	(29 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT30	(30 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT31	(31 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT32	(32 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT33	(33 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT34	(34 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT35	(35 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT36	(36 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT37	(37 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT38	(38 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT39	(39 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT40	(40 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT41	(41 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT42	(42 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT43	(43 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT44	(44 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT45	(45 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT46	(46 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT47	(47 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT48	(48 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT49	(49 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT50	(50 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT51	(51 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT52	(52 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT53	(53 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT54	(54 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT55	(55 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT56	(56 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT57	(57 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT58	(58 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT59	(59 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT60	(60 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT61	(61 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT62	(62 + EMMA2RH_IRQ_BASE)
-#define EMMA2RH_IRQ_INT63	(63 + EMMA2RH_IRQ_BASE)
-
-#define EMMA2RH_IRQ_PFUR0	EMMA2RH_IRQ_INT49
-#define EMMA2RH_IRQ_PFUR1	EMMA2RH_IRQ_INT50
-#define EMMA2RH_IRQ_PFUR2	EMMA2RH_IRQ_INT51
-#define EMMA2RH_IRQ_PIIC0	EMMA2RH_IRQ_INT56
-#define EMMA2RH_IRQ_PIIC1	EMMA2RH_IRQ_INT57
-#define EMMA2RH_IRQ_PIIC2	EMMA2RH_IRQ_INT58
+#define EMMA2RH_IRQ_INT(n)	(EMMA2RH_IRQ_BASE + (n))
+
+#define EMMA2RH_IRQ_PFUR0	EMMA2RH_IRQ_INT(49)
+#define EMMA2RH_IRQ_PFUR1	EMMA2RH_IRQ_INT(50)
+#define EMMA2RH_IRQ_PFUR2	EMMA2RH_IRQ_INT(51)
+#define EMMA2RH_IRQ_PIIC0	EMMA2RH_IRQ_INT(56)
+#define EMMA2RH_IRQ_PIIC1	EMMA2RH_IRQ_INT(57)
+#define EMMA2RH_IRQ_PIIC2	EMMA2RH_IRQ_INT(58)
 
 /*
  *  EMMA2RH Register Access
diff --git a/arch/mips/include/asm/emma/markeins.h b/arch/mips/include/asm/emma/markeins.h
index 2618bf23024..bf2d229c2da 100644
--- a/arch/mips/include/asm/emma/markeins.h
+++ b/arch/mips/include/asm/emma/markeins.h
@@ -25,44 +25,13 @@
 #define NUM_EMMA2RH_IRQ_SW	32
 #define NUM_EMMA2RH_IRQ_GPIO	32
 
-#define EMMA2RH_SW_CASCADE	(EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0)
-#define EMMA2RH_GPIO_CASCADE	(EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0)
+#define EMMA2RH_SW_CASCADE	(EMMA2RH_IRQ_INT(7) - EMMA2RH_IRQ_INT(0))
+#define EMMA2RH_GPIO_CASCADE	(EMMA2RH_IRQ_INT(46) - EMMA2RH_IRQ_INT(0))
 
 #define EMMA2RH_SW_IRQ_BASE	(EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
 #define EMMA2RH_GPIO_IRQ_BASE	(EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
 
-#define EMMA2RH_SW_IRQ_INT0	(0+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT1	(1+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT2	(2+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT3	(3+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT4	(4+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT5	(5+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT6	(6+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT7	(7+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT8	(8+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT9	(9+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT10	(10+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT11	(11+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT12	(12+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT13	(13+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT14	(14+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT15	(15+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT16	(16+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT17	(17+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT18	(18+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT19	(19+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT20	(20+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT21	(21+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT22	(22+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT23	(23+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT24	(24+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT25	(25+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT26	(26+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT27	(27+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT28	(28+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT29	(29+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT30	(30+EMMA2RH_SW_IRQ_BASE)
-#define EMMA2RH_SW_IRQ_INT31	(31+EMMA2RH_SW_IRQ_BASE)
+#define EMMA2RH_SW_IRQ_INT(n)	(EMMA2RH_SW_IRQ_BASE + (n))
 
 #define MARKEINS_PCI_IRQ_INTA	EMMA2RH_GPIO_IRQ_BASE+15
 #define MARKEINS_PCI_IRQ_INTB	EMMA2RH_GPIO_IRQ_BASE+16
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 0eaf77ffbc4..4e332165d7b 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -87,7 +87,7 @@ do {									\
 	: "=r" (tmp));							\
 } while (0)
 
-#elif defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY)
 
 /*
  * These are slightly complicated by the fact that we guarantee R1 kernels to
@@ -138,7 +138,7 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+#elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
       defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
       defined(CONFIG_CPU_R5500)
 
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 25adfb02923..75753ca73bf 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -48,14 +48,14 @@ extern void kunmap_high(struct page *page);
 extern void *__kmap(struct page *page);
 extern void __kunmap(struct page *page);
 extern void *__kmap_atomic(struct page *page, enum km_type type);
-extern void __kunmap_atomic(void *kvaddr, enum km_type type);
+extern void __kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
 extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
 extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define kmap			__kmap
 #define kunmap			__kunmap
 #define kmap_atomic		__kmap_atomic
-#define kunmap_atomic		__kunmap_atomic
+#define kunmap_atomic_notypecheck		__kunmap_atomic_notypecheck
 #define kmap_atomic_to_page	__kmap_atomic_to_page
 
 #define flush_cache_kmaps()	flush_cache_all()
diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h
index 6489f00731c..444ff71aa0e 100644
--- a/arch/mips/include/asm/inst.h
+++ b/arch/mips/include/asm/inst.h
@@ -247,6 +247,12 @@ struct ma_format {	/* FPU multipy and add format (MIPS IV) */
 	unsigned int fmt : 2;
 };
 
+struct b_format { /* BREAK and SYSCALL */
+	unsigned int opcode:6;
+	unsigned int code:20;
+	unsigned int func:6;
+};
+
 #elif defined(__MIPSEL__)
 
 struct j_format {	/* Jump format */
@@ -314,6 +320,12 @@ struct ma_format {	/* FPU multipy and add format (MIPS IV) */
 	unsigned int opcode : 6;
 };
 
+struct b_format { /* BREAK and SYSCALL */
+	unsigned int func:6;
+	unsigned int code:20;
+	unsigned int opcode:6;
+};
+
 #else /* !defined (__MIPSEB__) && !defined (__MIPSEL__) */
 #error "MIPS but neither __MIPSEL__ nor __MIPSEB__?"
 #endif
@@ -328,7 +340,8 @@ union mips_instruction {
 	struct c_format c_format;
 	struct r_format r_format;
 	struct f_format f_format;
-        struct ma_format ma_format;
+	struct ma_format ma_format;
+	struct b_format b_format;
 };
 
 /* HACHACHAHCAHC ...  */
diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h
index 5bf62aafc89..6a9af5fcb5d 100644
--- a/arch/mips/include/asm/kdebug.h
+++ b/arch/mips/include/asm/kdebug.h
@@ -8,6 +8,9 @@ enum die_val {
 	DIE_FP,
 	DIE_TRAP,
 	DIE_RI,
+	DIE_PAGE_FAULT,
+	DIE_BREAK,
+	DIE_SSTEPBP
 };
 
 #endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/arch/mips/include/asm/kgdb.h b/arch/mips/include/asm/kgdb.h
index 19002d605ac..e6c0b0e14cc 100644
--- a/arch/mips/include/asm/kgdb.h
+++ b/arch/mips/include/asm/kgdb.h
@@ -8,28 +8,27 @@
 #if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
 	(_MIPS_ISA == _MIPS_ISA_MIPS32)
 
-#define KGDB_GDB_REG_SIZE 32
+#define KGDB_GDB_REG_SIZE	32
+#define GDB_SIZEOF_REG		sizeof(u32)
 
 #elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
 	(_MIPS_ISA == _MIPS_ISA_MIPS64)
 
 #ifdef CONFIG_32BIT
-#define KGDB_GDB_REG_SIZE 32
+#define KGDB_GDB_REG_SIZE	32
+#define GDB_SIZEOF_REG		sizeof(u32)
 #else /* CONFIG_CPU_32BIT */
-#define KGDB_GDB_REG_SIZE 64
+#define KGDB_GDB_REG_SIZE	64
+#define GDB_SIZEOF_REG		sizeof(u64)
 #endif
 #else
 #error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
 #endif /* _MIPS_ISA */
 
 #define BUFMAX			2048
-#if (KGDB_GDB_REG_SIZE == 32)
-#define NUMREGBYTES		(90*sizeof(u32))
-#define NUMCRITREGBYTES		(12*sizeof(u32))
-#else
-#define NUMREGBYTES		(90*sizeof(u64))
-#define NUMCRITREGBYTES		(12*sizeof(u64))
-#endif
+#define DBG_MAX_REG_NUM		72
+#define NUMREGBYTES		(DBG_MAX_REG_NUM * sizeof(GDB_SIZEOF_REG))
+#define NUMCRITREGBYTES		(12 * sizeof(GDB_SIZEOF_REG))
 #define BREAK_INSTR_SIZE	4
 #define CACHE_FLUSH_IS_SAFE	0
 
diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h
new file mode 100644
index 00000000000..e6ea4d4d720
--- /dev/null
+++ b/arch/mips/include/asm/kprobes.h
@@ -0,0 +1,92 @@
+/*
+ *  Kernel Probes (KProbes)
+ *  include/asm-mips/kprobes.h
+ *
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2010 Cavium Networks
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/cacheflush.h>
+#include <asm/kdebug.h>
+#include <asm/inst.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct kprobe;
+struct pt_regs;
+
+typedef union mips_instruction kprobe_opcode_t;
+
+#define MAX_INSN_SIZE 2
+
+#define flush_insn_slot(p)						\
+do {									\
+	flush_icache_range((unsigned long)p->addr,			\
+			   (unsigned long)p->addr +			\
+			   (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));	\
+} while (0)
+
+
+#define kretprobe_blacklist_size 0
+
+void arch_remove_kprobe(struct kprobe *p);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t *insn;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long old_SR;
+	unsigned long saved_SR;
+	unsigned long saved_epc;
+};
+
+#define MAX_JPROBES_STACK_SIZE 128
+#define MAX_JPROBES_STACK_ADDR \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - 32 - sizeof(struct pt_regs))
+
+#define MIN_JPROBES_STACK_SIZE(ADDR)					\
+	((((ADDR) + MAX_JPROBES_STACK_SIZE) > MAX_JPROBES_STACK_ADDR)	\
+		? MAX_JPROBES_STACK_ADDR - (ADDR)			\
+		: MAX_JPROBES_STACK_SIZE)
+
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_old_SR;
+	unsigned long kprobe_saved_SR;
+	unsigned long kprobe_saved_epc;
+	unsigned long jprobe_saved_sp;
+	struct pt_regs jprobe_saved_regs;
+	u8 jprobes_stack[MAX_JPROBES_STACK_SIZE];
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+#endif				/* _ASM_KPROBES_H */
diff --git a/arch/mips/include/asm/local64.h b/arch/mips/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/mips/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
index bae9b758fcd..49dc8d9db18 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
@@ -9,6 +9,7 @@ struct au1000_eth_platform_data {
 	int phy_addr;
 	int phy_busid;
 	int phy_irq;
+	char mac[6];
 };
 
 void __init au1xxx_override_eth_cfg(unsigned port,
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
index 0d8cc146f7a..c58ebd8bc15 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -31,6 +31,9 @@ struct nvram_header {
 #define NVRAM_MAX_VALUE_LEN 255
 #define NVRAM_MAX_PARAM_LEN 64
 
+#define NVRAM_ERR_INV_PARAM	-8
+#define NVRAM_ERR_ENVNOTFOUND	-9
+
 extern int nvram_getenv(char *name, char *val, size_t val_len);
 
 #endif
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index bbf05404239..b952fc7215e 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -61,21 +61,18 @@
 
 #define kernel_uses_smartmips_rixi (cpu_data[0].cputype == CPU_CAVIUM_OCTEON_PLUS)
 
-#define ARCH_HAS_READ_CURRENT_TIMER 1
 #define ARCH_HAS_IRQ_PER_CPU	1
 #define ARCH_HAS_SPINLOCK_PREFETCH 1
 #define spin_lock_prefetch(x) prefetch(x)
 #define PREFETCH_STRIDE 128
 
-static inline int read_current_timer(unsigned long *result)
-{
-	asm volatile ("rdhwr %0,$31\n"
-#ifndef CONFIG_64BIT
-		      "\tsll %0, 0"
+#ifdef __OCTEON__
+/*
+ * All gcc versions that have OCTEON support define __OCTEON__ and have the
+ *  __builtin_popcount support.
+ */
+#define ARCH_HAS_USABLE_BUILTIN_POPCOUNT 1
 #endif
-		      : "=r" (*result));
-	return 0;
-}
 
 static inline int octeon_has_saa(void)
 {
diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h
index d32220fbf4f..6ddab8aef64 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/irq.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h
@@ -172,71 +172,9 @@
 #ifdef CONFIG_PCI_MSI
 /* 152 - 215 represent the MSI interrupts 0-63 */
 #define OCTEON_IRQ_MSI_BIT0	152
-#define OCTEON_IRQ_MSI_BIT1	153
-#define OCTEON_IRQ_MSI_BIT2	154
-#define OCTEON_IRQ_MSI_BIT3	155
-#define OCTEON_IRQ_MSI_BIT4	156
-#define OCTEON_IRQ_MSI_BIT5	157
-#define OCTEON_IRQ_MSI_BIT6	158
-#define OCTEON_IRQ_MSI_BIT7	159
-#define OCTEON_IRQ_MSI_BIT8	160
-#define OCTEON_IRQ_MSI_BIT9	161
-#define OCTEON_IRQ_MSI_BIT10	162
-#define OCTEON_IRQ_MSI_BIT11	163
-#define OCTEON_IRQ_MSI_BIT12	164
-#define OCTEON_IRQ_MSI_BIT13	165
-#define OCTEON_IRQ_MSI_BIT14	166
-#define OCTEON_IRQ_MSI_BIT15	167
-#define OCTEON_IRQ_MSI_BIT16	168
-#define OCTEON_IRQ_MSI_BIT17	169
-#define OCTEON_IRQ_MSI_BIT18	170
-#define OCTEON_IRQ_MSI_BIT19	171
-#define OCTEON_IRQ_MSI_BIT20	172
-#define OCTEON_IRQ_MSI_BIT21	173
-#define OCTEON_IRQ_MSI_BIT22	174
-#define OCTEON_IRQ_MSI_BIT23	175
-#define OCTEON_IRQ_MSI_BIT24	176
-#define OCTEON_IRQ_MSI_BIT25	177
-#define OCTEON_IRQ_MSI_BIT26	178
-#define OCTEON_IRQ_MSI_BIT27	179
-#define OCTEON_IRQ_MSI_BIT28	180
-#define OCTEON_IRQ_MSI_BIT29	181
-#define OCTEON_IRQ_MSI_BIT30	182
-#define OCTEON_IRQ_MSI_BIT31	183
-#define OCTEON_IRQ_MSI_BIT32	184
-#define OCTEON_IRQ_MSI_BIT33	185
-#define OCTEON_IRQ_MSI_BIT34	186
-#define OCTEON_IRQ_MSI_BIT35	187
-#define OCTEON_IRQ_MSI_BIT36	188
-#define OCTEON_IRQ_MSI_BIT37	189
-#define OCTEON_IRQ_MSI_BIT38	190
-#define OCTEON_IRQ_MSI_BIT39	191
-#define OCTEON_IRQ_MSI_BIT40	192
-#define OCTEON_IRQ_MSI_BIT41	193
-#define OCTEON_IRQ_MSI_BIT42	194
-#define OCTEON_IRQ_MSI_BIT43	195
-#define OCTEON_IRQ_MSI_BIT44	196
-#define OCTEON_IRQ_MSI_BIT45	197
-#define OCTEON_IRQ_MSI_BIT46	198
-#define OCTEON_IRQ_MSI_BIT47	199
-#define OCTEON_IRQ_MSI_BIT48	200
-#define OCTEON_IRQ_MSI_BIT49	201
-#define OCTEON_IRQ_MSI_BIT50	202
-#define OCTEON_IRQ_MSI_BIT51	203
-#define OCTEON_IRQ_MSI_BIT52	204
-#define OCTEON_IRQ_MSI_BIT53	205
-#define OCTEON_IRQ_MSI_BIT54	206
-#define OCTEON_IRQ_MSI_BIT55	207
-#define OCTEON_IRQ_MSI_BIT56	208
-#define OCTEON_IRQ_MSI_BIT57	209
-#define OCTEON_IRQ_MSI_BIT58	210
-#define OCTEON_IRQ_MSI_BIT59	211
-#define OCTEON_IRQ_MSI_BIT60	212
-#define OCTEON_IRQ_MSI_BIT61	213
-#define OCTEON_IRQ_MSI_BIT62	214
-#define OCTEON_IRQ_MSI_BIT63	215
+#define OCTEON_IRQ_MSI_LAST	(OCTEON_IRQ_MSI_BIT0 + 255)
 
-#define OCTEON_IRQ_LAST         216
+#define OCTEON_IRQ_LAST		(OCTEON_IRQ_MSI_LAST + 1)
 #else
 #define OCTEON_IRQ_LAST         152
 #endif
diff --git a/arch/mips/include/asm/mach-jz4740/base.h b/arch/mips/include/asm/mach-jz4740/base.h
new file mode 100644
index 00000000000..f3731860545
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/base.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_MACH_JZ4740_BASE_H__
+#define __ASM_MACH_JZ4740_BASE_H__
+
+#define JZ4740_CPM_BASE_ADDR	0x10000000
+#define JZ4740_INTC_BASE_ADDR	0x10001000
+#define JZ4740_WDT_BASE_ADDR	0x10002000
+#define JZ4740_TCU_BASE_ADDR	0x10002010
+#define JZ4740_RTC_BASE_ADDR	0x10003000
+#define JZ4740_GPIO_BASE_ADDR	0x10010000
+#define JZ4740_AIC_BASE_ADDR	0x10020000
+#define JZ4740_MSC_BASE_ADDR	0x10021000
+#define JZ4740_UART0_BASE_ADDR	0x10030000
+#define JZ4740_UART1_BASE_ADDR	0x10031000
+#define JZ4740_I2C_BASE_ADDR	0x10042000
+#define JZ4740_SSI_BASE_ADDR	0x10043000
+#define JZ4740_SADC_BASE_ADDR	0x10070000
+#define JZ4740_EMC_BASE_ADDR	0x13010000
+#define JZ4740_DMAC_BASE_ADDR	0x13020000
+#define JZ4740_UHC_BASE_ADDR	0x13030000
+#define JZ4740_UDC_BASE_ADDR	0x13040000
+#define JZ4740_LCD_BASE_ADDR	0x13050000
+#define JZ4740_SLCD_BASE_ADDR	0x13050000
+#define JZ4740_CIM_BASE_ADDR	0x13060000
+#define JZ4740_IPU_BASE_ADDR	0x13080000
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/clock.h b/arch/mips/include/asm/mach-jz4740/clock.h
new file mode 100644
index 00000000000..1b7408dd0e2
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/clock.h
@@ -0,0 +1,28 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_JZ4740_CLOCK_H__
+#define __ASM_JZ4740_CLOCK_H__
+
+enum jz4740_wait_mode {
+	JZ4740_WAIT_MODE_IDLE,
+	JZ4740_WAIT_MODE_SLEEP,
+};
+
+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode);
+
+void jz4740_clock_udc_enable_auto_suspend(void);
+void jz4740_clock_udc_disable_auto_suspend(void);
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
new file mode 100644
index 00000000000..d12e5c6477b
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/cpu-feature-overrides.h
@@ -0,0 +1,51 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MACH_JZ4740_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_JZ4740_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb 1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr	0
+#define cpu_has_counter		0
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+#define cpu_has_mcheck 1
+#define cpu_has_ejtag 1
+#define cpu_has_llsc		1
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define kernel_uses_llsc	1
+#define cpu_has_vtag_icache	1
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_pindexed_dcache 0
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_has_nofpuex 0
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg 0
+#define cpu_has_inclusive_pcaches 0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h
new file mode 100644
index 00000000000..a3be1218359
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/dma.h
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ7420/JZ4740 DMA definitions
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_MACH_JZ4740_DMA_H__
+#define __ASM_MACH_JZ4740_DMA_H__
+
+struct jz4740_dma_chan;
+
+enum jz4740_dma_request_type {
+	JZ4740_DMA_TYPE_AUTO_REQUEST	= 8,
+	JZ4740_DMA_TYPE_UART_TRANSMIT	= 20,
+	JZ4740_DMA_TYPE_UART_RECEIVE	= 21,
+	JZ4740_DMA_TYPE_SPI_TRANSMIT	= 22,
+	JZ4740_DMA_TYPE_SPI_RECEIVE	= 23,
+	JZ4740_DMA_TYPE_AIC_TRANSMIT	= 24,
+	JZ4740_DMA_TYPE_AIC_RECEIVE	= 25,
+	JZ4740_DMA_TYPE_MMC_TRANSMIT	= 26,
+	JZ4740_DMA_TYPE_MMC_RECEIVE	= 27,
+	JZ4740_DMA_TYPE_TCU		= 28,
+	JZ4740_DMA_TYPE_SADC		= 29,
+	JZ4740_DMA_TYPE_SLCD		= 30,
+};
+
+enum jz4740_dma_width {
+	JZ4740_DMA_WIDTH_32BIT	= 0,
+	JZ4740_DMA_WIDTH_8BIT	= 1,
+	JZ4740_DMA_WIDTH_16BIT	= 2,
+};
+
+enum jz4740_dma_transfer_size {
+	JZ4740_DMA_TRANSFER_SIZE_4BYTE  = 0,
+	JZ4740_DMA_TRANSFER_SIZE_1BYTE  = 1,
+	JZ4740_DMA_TRANSFER_SIZE_2BYTE  = 2,
+	JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3,
+	JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4,
+};
+
+enum jz4740_dma_flags {
+	JZ4740_DMA_SRC_AUTOINC = 0x2,
+	JZ4740_DMA_DST_AUTOINC = 0x1,
+};
+
+enum jz4740_dma_mode {
+	JZ4740_DMA_MODE_SINGLE	= 0,
+	JZ4740_DMA_MODE_BLOCK	= 1,
+};
+
+struct jz4740_dma_config {
+	enum jz4740_dma_width src_width;
+	enum jz4740_dma_width dst_width;
+	enum jz4740_dma_transfer_size transfer_size;
+	enum jz4740_dma_request_type request_type;
+	enum jz4740_dma_flags flags;
+	enum jz4740_dma_mode mode;
+};
+
+typedef void (*jz4740_dma_complete_callback_t)(struct jz4740_dma_chan *, int, void *);
+
+struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name);
+void jz4740_dma_free(struct jz4740_dma_chan *dma);
+
+void jz4740_dma_configure(struct jz4740_dma_chan *dma,
+	const struct jz4740_dma_config *config);
+
+
+void jz4740_dma_enable(struct jz4740_dma_chan *dma);
+void jz4740_dma_disable(struct jz4740_dma_chan *dma);
+
+void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src);
+void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst);
+void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count);
+
+uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma);
+
+void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
+	jz4740_dma_complete_callback_t cb);
+
+#endif  /* __ASM_JZ4740_DMA_H__ */
diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h
new file mode 100644
index 00000000000..7b74703745b
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/gpio.h
@@ -0,0 +1,398 @@
+/*
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 GPIO pin definitions
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _JZ_GPIO_H
+#define _JZ_GPIO_H
+
+#include <linux/types.h>
+
+enum jz_gpio_function {
+    JZ_GPIO_FUNC_NONE,
+    JZ_GPIO_FUNC1,
+    JZ_GPIO_FUNC2,
+    JZ_GPIO_FUNC3,
+};
+
+
+/*
+ Usually a driver for a SoC component has to request several gpio pins and
+ configure them as funcion pins.
+ jz_gpio_bulk_request can be used to ease this process.
+ Usually one would do something like:
+
+ const static struct jz_gpio_bulk_request i2c_pins[] = {
+	JZ_GPIO_BULK_PIN(I2C_SDA),
+	JZ_GPIO_BULK_PIN(I2C_SCK),
+ };
+
+ inside the probe function:
+
+    ret = jz_gpio_bulk_request(i2c_pins, ARRAY_SIZE(i2c_pins));
+    if (ret) {
+	...
+
+ inside the remove function:
+
+    jz_gpio_bulk_free(i2c_pins, ARRAY_SIZE(i2c_pins));
+
+
+*/
+struct jz_gpio_bulk_request {
+	int gpio;
+	const char *name;
+	enum jz_gpio_function function;
+};
+
+#define JZ_GPIO_BULK_PIN(pin) { \
+    .gpio = JZ_GPIO_ ## pin, \
+    .name = #pin, \
+    .function = JZ_GPIO_FUNC_ ## pin \
+}
+
+int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num);
+void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num);
+void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num);
+void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num);
+void jz_gpio_enable_pullup(unsigned gpio);
+void jz_gpio_disable_pullup(unsigned gpio);
+int jz_gpio_set_function(int gpio, enum jz_gpio_function function);
+
+int jz_gpio_port_direction_input(int port, uint32_t mask);
+int jz_gpio_port_direction_output(int port, uint32_t mask);
+void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask);
+uint32_t jz_gpio_port_get_value(int port, uint32_t mask);
+
+#include <asm/mach-generic/gpio.h>
+
+#define JZ_GPIO_PORTA(x) ((x) + 32 * 0)
+#define JZ_GPIO_PORTB(x) ((x) + 32 * 1)
+#define JZ_GPIO_PORTC(x) ((x) + 32 * 2)
+#define JZ_GPIO_PORTD(x) ((x) + 32 * 3)
+
+/* Port A function pins */
+#define JZ_GPIO_MEM_DATA0		JZ_GPIO_PORTA(0)
+#define JZ_GPIO_MEM_DATA1		JZ_GPIO_PORTA(1)
+#define JZ_GPIO_MEM_DATA2		JZ_GPIO_PORTA(2)
+#define JZ_GPIO_MEM_DATA3		JZ_GPIO_PORTA(3)
+#define JZ_GPIO_MEM_DATA4		JZ_GPIO_PORTA(4)
+#define JZ_GPIO_MEM_DATA5		JZ_GPIO_PORTA(5)
+#define JZ_GPIO_MEM_DATA6		JZ_GPIO_PORTA(6)
+#define JZ_GPIO_MEM_DATA7		JZ_GPIO_PORTA(7)
+#define JZ_GPIO_MEM_DATA8		JZ_GPIO_PORTA(8)
+#define JZ_GPIO_MEM_DATA9		JZ_GPIO_PORTA(9)
+#define JZ_GPIO_MEM_DATA10		JZ_GPIO_PORTA(10)
+#define JZ_GPIO_MEM_DATA11		JZ_GPIO_PORTA(11)
+#define JZ_GPIO_MEM_DATA12		JZ_GPIO_PORTA(12)
+#define JZ_GPIO_MEM_DATA13		JZ_GPIO_PORTA(13)
+#define JZ_GPIO_MEM_DATA14		JZ_GPIO_PORTA(14)
+#define JZ_GPIO_MEM_DATA15		JZ_GPIO_PORTA(15)
+#define JZ_GPIO_MEM_DATA16		JZ_GPIO_PORTA(16)
+#define JZ_GPIO_MEM_DATA17		JZ_GPIO_PORTA(17)
+#define JZ_GPIO_MEM_DATA18		JZ_GPIO_PORTA(18)
+#define JZ_GPIO_MEM_DATA19		JZ_GPIO_PORTA(19)
+#define JZ_GPIO_MEM_DATA20		JZ_GPIO_PORTA(20)
+#define JZ_GPIO_MEM_DATA21		JZ_GPIO_PORTA(21)
+#define JZ_GPIO_MEM_DATA22		JZ_GPIO_PORTA(22)
+#define JZ_GPIO_MEM_DATA23		JZ_GPIO_PORTA(23)
+#define JZ_GPIO_MEM_DATA24		JZ_GPIO_PORTA(24)
+#define JZ_GPIO_MEM_DATA25		JZ_GPIO_PORTA(25)
+#define JZ_GPIO_MEM_DATA26		JZ_GPIO_PORTA(26)
+#define JZ_GPIO_MEM_DATA27		JZ_GPIO_PORTA(27)
+#define JZ_GPIO_MEM_DATA28		JZ_GPIO_PORTA(28)
+#define JZ_GPIO_MEM_DATA29		JZ_GPIO_PORTA(29)
+#define JZ_GPIO_MEM_DATA30		JZ_GPIO_PORTA(30)
+#define JZ_GPIO_MEM_DATA31		JZ_GPIO_PORTA(31)
+
+#define JZ_GPIO_FUNC_MEM_DATA0		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA1		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA2		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA3		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA4		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA5		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA6		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA7		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA8		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA9		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA10		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA11		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA12		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA13		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA14		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA15		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA16		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA17		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA18		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA19		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA20		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA21		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA22		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA23		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA24		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA25		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA26		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA27		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA28		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA29		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA30		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DATA31		JZ_GPIO_FUNC1
+
+/* Port B function pins */
+#define JZ_GPIO_MEM_ADDR0		JZ_GPIO_PORTB(0)
+#define JZ_GPIO_MEM_ADDR1		JZ_GPIO_PORTB(1)
+#define JZ_GPIO_MEM_ADDR2		JZ_GPIO_PORTB(2)
+#define JZ_GPIO_MEM_ADDR3		JZ_GPIO_PORTB(3)
+#define JZ_GPIO_MEM_ADDR4		JZ_GPIO_PORTB(4)
+#define JZ_GPIO_MEM_ADDR5		JZ_GPIO_PORTB(5)
+#define JZ_GPIO_MEM_ADDR6		JZ_GPIO_PORTB(6)
+#define JZ_GPIO_MEM_ADDR7		JZ_GPIO_PORTB(7)
+#define JZ_GPIO_MEM_ADDR8		JZ_GPIO_PORTB(8)
+#define JZ_GPIO_MEM_ADDR9		JZ_GPIO_PORTB(9)
+#define JZ_GPIO_MEM_ADDR10		JZ_GPIO_PORTB(10)
+#define JZ_GPIO_MEM_ADDR11		JZ_GPIO_PORTB(11)
+#define JZ_GPIO_MEM_ADDR12		JZ_GPIO_PORTB(12)
+#define JZ_GPIO_MEM_ADDR13		JZ_GPIO_PORTB(13)
+#define JZ_GPIO_MEM_ADDR14		JZ_GPIO_PORTB(14)
+#define JZ_GPIO_MEM_ADDR15		JZ_GPIO_PORTB(15)
+#define JZ_GPIO_MEM_ADDR16		JZ_GPIO_PORTB(16)
+#define JZ_GPIO_LCD_CLS			JZ_GPIO_PORTB(17)
+#define JZ_GPIO_LCD_SPL			JZ_GPIO_PORTB(18)
+#define JZ_GPIO_MEM_DCS			JZ_GPIO_PORTB(19)
+#define JZ_GPIO_MEM_RAS			JZ_GPIO_PORTB(20)
+#define JZ_GPIO_MEM_CAS			JZ_GPIO_PORTB(21)
+#define JZ_GPIO_MEM_SDWE		JZ_GPIO_PORTB(22)
+#define JZ_GPIO_MEM_CKE			JZ_GPIO_PORTB(23)
+#define JZ_GPIO_MEM_CKO			JZ_GPIO_PORTB(24)
+#define JZ_GPIO_MEM_CS0			JZ_GPIO_PORTB(25)
+#define JZ_GPIO_MEM_CS1			JZ_GPIO_PORTB(26)
+#define JZ_GPIO_MEM_CS2			JZ_GPIO_PORTB(27)
+#define JZ_GPIO_MEM_CS3			JZ_GPIO_PORTB(28)
+#define JZ_GPIO_MEM_RD			JZ_GPIO_PORTB(29)
+#define JZ_GPIO_MEM_WR			JZ_GPIO_PORTB(30)
+#define JZ_GPIO_MEM_WE0			JZ_GPIO_PORTB(31)
+
+#define JZ_GPIO_FUNC_MEM_ADDR0		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR1		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR2		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR3		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR4		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR5		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR6		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR7		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR8		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR9		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR10		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR11		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR12		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR13		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR14		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR15		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_ADDR16		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_CLS	        JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_SPL		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_DCS		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_RAS		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CAS		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_SDWE		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CKE		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CKO		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CS0		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CS1		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CS2		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_CS3		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_RD		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WR		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WE0		JZ_GPIO_FUNC1
+
+
+#define JZ_GPIO_MEM_ADDR21		JZ_GPIO_PORTB(17)
+#define JZ_GPIO_MEM_ADDR22		JZ_GPIO_PORTB(18)
+
+#define JZ_GPIO_FUNC_MEM_ADDR21		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_ADDR22		JZ_GPIO_FUNC2
+
+/* Port C function pins */
+#define JZ_GPIO_LCD_DATA0		JZ_GPIO_PORTC(0)
+#define JZ_GPIO_LCD_DATA1		JZ_GPIO_PORTC(1)
+#define JZ_GPIO_LCD_DATA2		JZ_GPIO_PORTC(2)
+#define JZ_GPIO_LCD_DATA3		JZ_GPIO_PORTC(3)
+#define JZ_GPIO_LCD_DATA4		JZ_GPIO_PORTC(4)
+#define JZ_GPIO_LCD_DATA5		JZ_GPIO_PORTC(5)
+#define JZ_GPIO_LCD_DATA6		JZ_GPIO_PORTC(6)
+#define JZ_GPIO_LCD_DATA7		JZ_GPIO_PORTC(7)
+#define JZ_GPIO_LCD_DATA8		JZ_GPIO_PORTC(8)
+#define JZ_GPIO_LCD_DATA9		JZ_GPIO_PORTC(9)
+#define JZ_GPIO_LCD_DATA10		JZ_GPIO_PORTC(10)
+#define JZ_GPIO_LCD_DATA11		JZ_GPIO_PORTC(11)
+#define JZ_GPIO_LCD_DATA12		JZ_GPIO_PORTC(12)
+#define JZ_GPIO_LCD_DATA13		JZ_GPIO_PORTC(13)
+#define JZ_GPIO_LCD_DATA14		JZ_GPIO_PORTC(14)
+#define JZ_GPIO_LCD_DATA15		JZ_GPIO_PORTC(15)
+#define JZ_GPIO_LCD_DATA16		JZ_GPIO_PORTC(16)
+#define JZ_GPIO_LCD_DATA17		JZ_GPIO_PORTC(17)
+#define JZ_GPIO_LCD_PCLK		JZ_GPIO_PORTC(18)
+#define JZ_GPIO_LCD_HSYNC		JZ_GPIO_PORTC(19)
+#define JZ_GPIO_LCD_VSYNC		JZ_GPIO_PORTC(20)
+#define JZ_GPIO_LCD_DE			JZ_GPIO_PORTC(21)
+#define JZ_GPIO_LCD_PS			JZ_GPIO_PORTC(22)
+#define JZ_GPIO_LCD_REV			JZ_GPIO_PORTC(23)
+#define JZ_GPIO_MEM_WE1			JZ_GPIO_PORTC(24)
+#define JZ_GPIO_MEM_WE2			JZ_GPIO_PORTC(25)
+#define JZ_GPIO_MEM_WE3			JZ_GPIO_PORTC(26)
+#define JZ_GPIO_MEM_WAIT		JZ_GPIO_PORTC(27)
+#define JZ_GPIO_MEM_FRE			JZ_GPIO_PORTC(28)
+#define JZ_GPIO_MEM_FWE			JZ_GPIO_PORTC(29)
+
+#define JZ_GPIO_FUNC_LCD_DATA0		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA1		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA2		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA3		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA4		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA5		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA6		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA7		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA8		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA9		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA10		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA11		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA12		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA13		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA14		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA15		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA16		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DATA17		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_PCLK		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_VSYNC		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_HSYNC		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_DE		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_PS		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_LCD_REV		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WE1		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WE2		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WE3		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_WAIT		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_FRE		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MEM_FWE		JZ_GPIO_FUNC1
+
+
+#define JZ_GPIO_MEM_ADDR19		JZ_GPIO_PORTB(22)
+#define JZ_GPIO_MEM_ADDR20		JZ_GPIO_PORTB(23)
+
+#define JZ_GPIO_FUNC_MEM_ADDR19		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_ADDR20		JZ_GPIO_FUNC2
+
+/* Port D function pins */
+#define JZ_GPIO_CIM_DATA0		JZ_GPIO_PORTD(0)
+#define JZ_GPIO_CIM_DATA1		JZ_GPIO_PORTD(1)
+#define JZ_GPIO_CIM_DATA2		JZ_GPIO_PORTD(2)
+#define JZ_GPIO_CIM_DATA3		JZ_GPIO_PORTD(3)
+#define JZ_GPIO_CIM_DATA4		JZ_GPIO_PORTD(4)
+#define JZ_GPIO_CIM_DATA5		JZ_GPIO_PORTD(5)
+#define JZ_GPIO_CIM_DATA6		JZ_GPIO_PORTD(6)
+#define JZ_GPIO_CIM_DATA7		JZ_GPIO_PORTD(7)
+#define JZ_GPIO_MSC_CMD			JZ_GPIO_PORTD(8)
+#define JZ_GPIO_MSC_CLK			JZ_GPIO_PORTD(9)
+#define JZ_GPIO_MSC_DATA0		JZ_GPIO_PORTD(10)
+#define JZ_GPIO_MSC_DATA1		JZ_GPIO_PORTD(11)
+#define JZ_GPIO_MSC_DATA2		JZ_GPIO_PORTD(12)
+#define JZ_GPIO_MSC_DATA3		JZ_GPIO_PORTD(13)
+#define JZ_GPIO_CIM_MCLK		JZ_GPIO_PORTD(14)
+#define JZ_GPIO_CIM_PCLK		JZ_GPIO_PORTD(15)
+#define JZ_GPIO_CIM_VSYNC		JZ_GPIO_PORTD(16)
+#define JZ_GPIO_CIM_HSYNC		JZ_GPIO_PORTD(17)
+#define JZ_GPIO_SPI_CLK			JZ_GPIO_PORTD(18)
+#define JZ_GPIO_SPI_CE0			JZ_GPIO_PORTD(19)
+#define JZ_GPIO_SPI_DT			JZ_GPIO_PORTD(20)
+#define JZ_GPIO_SPI_DR			JZ_GPIO_PORTD(21)
+#define JZ_GPIO_SPI_CE1			JZ_GPIO_PORTD(22)
+#define JZ_GPIO_PWM0			JZ_GPIO_PORTD(23)
+#define JZ_GPIO_PWM1			JZ_GPIO_PORTD(24)
+#define JZ_GPIO_PWM2			JZ_GPIO_PORTD(25)
+#define JZ_GPIO_PWM3			JZ_GPIO_PORTD(26)
+#define JZ_GPIO_PWM4			JZ_GPIO_PORTD(27)
+#define JZ_GPIO_PWM5			JZ_GPIO_PORTD(28)
+#define JZ_GPIO_PWM6			JZ_GPIO_PORTD(30)
+#define JZ_GPIO_PWM7			JZ_GPIO_PORTD(31)
+
+#define JZ_GPIO_FUNC_CIM_DATA		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_CIM_DATA0		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA1		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA2		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA3		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA4		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA5		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA6		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_CIM_DATA7		JZ_GPIO_FUNC_CIM_DATA
+#define JZ_GPIO_FUNC_MSC_CMD		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MSC_CLK		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MSC_DATA		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_MSC_DATA0		JZ_GPIO_FUNC_MSC_DATA
+#define JZ_GPIO_FUNC_MSC_DATA1		JZ_GPIO_FUNC_MSC_DATA
+#define JZ_GPIO_FUNC_MSC_DATA2		JZ_GPIO_FUNC_MSC_DATA
+#define JZ_GPIO_FUNC_MSC_DATA3		JZ_GPIO_FUNC_MSC_DATA
+#define JZ_GPIO_FUNC_CIM_MCLK		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_CIM_PCLK		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_CIM_VSYNC		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_CIM_HSYNC		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_SPI_CLK		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_SPI_CE0		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_SPI_DT		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_SPI_DR		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_SPI_CE1		JZ_GPIO_FUNC1
+
+#define JZ_GPIO_FUNC_PWM		JZ_GPIO_FUNC1
+#define JZ_GPIO_FUNC_PWM0		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM1		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM2		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM3		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM4		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM5		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM6		JZ_GPIO_FUNC_PWM
+#define JZ_GPIO_FUNC_PWM7		JZ_GPIO_FUNC_PWM
+
+#define JZ_GPIO_MEM_SCLK_RSTN		JZ_GPIO_PORTD(18)
+#define JZ_GPIO_MEM_BCLK		JZ_GPIO_PORTD(19)
+#define JZ_GPIO_MEM_SDATO		JZ_GPIO_PORTD(20)
+#define JZ_GPIO_MEM_SDATI		JZ_GPIO_PORTD(21)
+#define JZ_GPIO_MEM_SYNC		JZ_GPIO_PORTD(22)
+#define JZ_GPIO_I2C_SDA			JZ_GPIO_PORTD(23)
+#define JZ_GPIO_I2C_SCK			JZ_GPIO_PORTD(24)
+#define JZ_GPIO_UART0_TXD		JZ_GPIO_PORTD(25)
+#define JZ_GPIO_UART0_RXD		JZ_GPIO_PORTD(26)
+#define JZ_GPIO_MEM_ADDR17		JZ_GPIO_PORTD(27)
+#define JZ_GPIO_MEM_ADDR18		JZ_GPIO_PORTD(28)
+#define JZ_GPIO_UART0_CTS		JZ_GPIO_PORTD(30)
+#define JZ_GPIO_UART0_RTS		JZ_GPIO_PORTD(31)
+
+#define JZ_GPIO_FUNC_MEM_SCLK_RSTN	JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_BCLK		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_SDATO		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_SDATI		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_SYNC		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_I2C_SDA		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_I2C_SCK		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_UART0_TXD		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_UART0_RXD		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_ADDR17		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_MEM_ADDR18		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_UART0_CTS		JZ_GPIO_FUNC2
+#define JZ_GPIO_FUNC_UART0_RTS		JZ_GPIO_FUNC2
+
+#define JZ_GPIO_UART1_RXD		JZ_GPIO_PORTD(30)
+#define JZ_GPIO_UART1_TXD		JZ_GPIO_PORTD(31)
+
+#define JZ_GPIO_FUNC_UART1_RXD		JZ_GPIO_FUNC3
+#define JZ_GPIO_FUNC_UART1_TXD		JZ_GPIO_FUNC3
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h
new file mode 100644
index 00000000000..a865c983c70
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/irq.h
@@ -0,0 +1,57 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 IRQ definitions
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_MACH_JZ4740_IRQ_H__
+#define __ASM_MACH_JZ4740_IRQ_H__
+
+#define MIPS_CPU_IRQ_BASE 0
+#define JZ4740_IRQ_BASE 8
+
+/* 1st-level interrupts */
+#define JZ4740_IRQ(x)		(JZ4740_IRQ_BASE + (x))
+#define JZ4740_IRQ_I2C		JZ4740_IRQ(1)
+#define JZ4740_IRQ_UHC		JZ4740_IRQ(3)
+#define JZ4740_IRQ_UART1	JZ4740_IRQ(8)
+#define JZ4740_IRQ_UART0	JZ4740_IRQ(9)
+#define JZ4740_IRQ_SADC		JZ4740_IRQ(12)
+#define JZ4740_IRQ_MSC		JZ4740_IRQ(14)
+#define JZ4740_IRQ_RTC		JZ4740_IRQ(15)
+#define JZ4740_IRQ_SSI		JZ4740_IRQ(16)
+#define JZ4740_IRQ_CIM		JZ4740_IRQ(17)
+#define JZ4740_IRQ_AIC		JZ4740_IRQ(18)
+#define JZ4740_IRQ_ETH		JZ4740_IRQ(19)
+#define JZ4740_IRQ_DMAC		JZ4740_IRQ(20)
+#define JZ4740_IRQ_TCU2		JZ4740_IRQ(21)
+#define JZ4740_IRQ_TCU1		JZ4740_IRQ(22)
+#define JZ4740_IRQ_TCU0		JZ4740_IRQ(23)
+#define JZ4740_IRQ_UDC		JZ4740_IRQ(24)
+#define JZ4740_IRQ_GPIO3	JZ4740_IRQ(25)
+#define JZ4740_IRQ_GPIO2	JZ4740_IRQ(26)
+#define JZ4740_IRQ_GPIO1	JZ4740_IRQ(27)
+#define JZ4740_IRQ_GPIO0	JZ4740_IRQ(28)
+#define JZ4740_IRQ_IPU		JZ4740_IRQ(29)
+#define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
+
+/* 2nd-level interrupts */
+#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (X))
+
+#define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
+#define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(48) + (x))
+
+#define JZ4740_IRQ_ADC_BASE	JZ4740_IRQ(176)
+
+#define NR_IRQS (JZ4740_IRQ_ADC_BASE + 6)
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_fb.h b/arch/mips/include/asm/mach-jz4740/jz4740_fb.h
new file mode 100644
index 00000000000..6a50e6f7a21
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_fb.h
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_MACH_JZ4740_JZ4740_FB_H__
+#define __ASM_MACH_JZ4740_JZ4740_FB_H__
+
+#include <linux/fb.h>
+
+enum jz4740_fb_lcd_type {
+	JZ_LCD_TYPE_GENERIC_16_BIT = 0,
+	JZ_LCD_TYPE_GENERIC_18_BIT = 0 | (1 << 4),
+	JZ_LCD_TYPE_SPECIAL_TFT_1 = 1,
+	JZ_LCD_TYPE_SPECIAL_TFT_2 = 2,
+	JZ_LCD_TYPE_SPECIAL_TFT_3 = 3,
+	JZ_LCD_TYPE_NON_INTERLACED_CCIR656 = 5,
+	JZ_LCD_TYPE_INTERLACED_CCIR656 = 7,
+	JZ_LCD_TYPE_SINGLE_COLOR_STN = 8,
+	JZ_LCD_TYPE_SINGLE_MONOCHROME_STN = 9,
+	JZ_LCD_TYPE_DUAL_COLOR_STN = 10,
+	JZ_LCD_TYPE_DUAL_MONOCHROME_STN = 11,
+	JZ_LCD_TYPE_8BIT_SERIAL = 12,
+};
+
+#define JZ4740_FB_SPECIAL_TFT_CONFIG(start, stop) (((start) << 16) | (stop))
+
+/*
+* width: width of the lcd display in mm
+* height: height of the lcd display in mm
+* num_modes: size of modes
+* modes: list of valid video modes
+* bpp: bits per pixel for the lcd
+* lcd_type: lcd type
+*/
+
+struct jz4740_fb_platform_data {
+	unsigned int width;
+	unsigned int height;
+
+	size_t num_modes;
+	struct fb_videomode *modes;
+
+	unsigned int bpp;
+	enum jz4740_fb_lcd_type lcd_type;
+
+	struct {
+		uint32_t spl;
+		uint32_t cls;
+		uint32_t ps;
+		uint32_t rev;
+	} special_tft_config;
+
+	unsigned pixclk_falling_edge:1;
+	unsigned date_enable_active_low:1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
new file mode 100644
index 00000000000..8543f432b4b
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_mmc.h
@@ -0,0 +1,15 @@
+#ifndef __LINUX_MMC_JZ4740_MMC
+#define __LINUX_MMC_JZ4740_MMC
+
+struct jz4740_mmc_platform_data {
+	int gpio_power;
+	int gpio_card_detect;
+	int gpio_read_only;
+	unsigned card_detect_active_low:1;
+	unsigned read_only_active_low:1;
+	unsigned power_active_low:1;
+
+	unsigned data_1bit:1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
new file mode 100644
index 00000000000..bb5b9a4e29c
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -0,0 +1,34 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC NAND controller driver
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_MACH_JZ4740_JZ4740_NAND_H__
+#define __ASM_MACH_JZ4740_JZ4740_NAND_H__
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+struct jz_nand_platform_data {
+	int			num_partitions;
+	struct mtd_partition	*partitions;
+
+	struct nand_ecclayout	*ecc_layout;
+
+	unsigned int busy_gpio;
+
+	void (*ident_callback)(struct platform_device *, struct nand_chip *,
+				struct mtd_partition **, int *num_partitions);
+};
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/platform.h b/arch/mips/include/asm/mach-jz4740/platform.h
new file mode 100644
index 00000000000..8987a76e967
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/platform.h
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform device definitions
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+
+#ifndef __JZ4740_PLATFORM_H
+#define __JZ4740_PLATFORM_H
+
+#include <linux/platform_device.h>
+
+extern struct platform_device jz4740_usb_ohci_device;
+extern struct platform_device jz4740_udc_device;
+extern struct platform_device jz4740_mmc_device;
+extern struct platform_device jz4740_rtc_device;
+extern struct platform_device jz4740_i2c_device;
+extern struct platform_device jz4740_nand_device;
+extern struct platform_device jz4740_framebuffer_device;
+extern struct platform_device jz4740_i2s_device;
+extern struct platform_device jz4740_pcm_device;
+extern struct platform_device jz4740_codec_device;
+extern struct platform_device jz4740_adc_device;
+
+void jz4740_serial_device_register(void);
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/timer.h b/arch/mips/include/asm/mach-jz4740/timer.h
new file mode 100644
index 00000000000..9baa03ce748
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/timer.h
@@ -0,0 +1,22 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform timer support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __ASM_MACH_JZ4740_TIMER
+#define __ASM_MACH_JZ4740_TIMER
+
+void jz4740_timer_enable_watchdog(void);
+void jz4740_timer_disable_watchdog(void);
+
+#endif
diff --git a/arch/mips/include/asm/mach-jz4740/war.h b/arch/mips/include/asm/mach-jz4740/war.h
new file mode 100644
index 00000000000..3a5bc17e28f
--- /dev/null
+++ b/arch/mips/include/asm/mach-jz4740/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_JZ4740_WAR_H
+#define __ASM_MIPS_MACH_JZ4740_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_JZ4740_WAR_H */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index fcdbe3a4ce1..cb6985f2430 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -45,7 +45,6 @@ static inline void prom_init_uart_base(void)
 /* irq operation functions */
 extern void bonito_irqdispatch(void);
 extern void __init bonito_irq_init(void);
-extern void __init set_irq_trigger_mode(void);
 extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
 extern int mach_i8259_irq(void);
@@ -63,6 +62,14 @@ extern int mach_i8259_irq(void);
 #define LOONGSON_IRQ_BASE	32
 #define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
 
+#include <linux/interrupt.h>
+static inline void do_perfcnt_IRQ(void)
+{
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
+	do_IRQ(LOONGSON2_PERFCNT_IRQ);
+#endif
+}
+
 #define LOONGSON_FLASH_BASE	0x1c000000
 #define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
 #define LOONGSON_FLASH_TOP	(LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index 58796410bd6..fc4d766641c 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -40,14 +40,6 @@
 #define SMBUS_PSC_BASE		PSC2_BASE_ADDR
 #define I2S_PSC_BASE		PSC3_BASE_ADDR
 
-#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
-#define PB1550_BOTH_BANKS
-#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
-#define PB1550_BOOT_ONLY
-#elif !defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
-#define PB1550_USER_ONLY
-#endif
-
 /*
  * Timing values as described in databook, * ns value stripped of
  * lower 2 bits.
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
index bcad43a93eb..c7077a64b9a 100644
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ b/arch/mips/include/asm/mach-powertv/asic.h
@@ -20,6 +20,7 @@
 #define _ASM_MACH_POWERTV_ASIC_H
 
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
 #include <asm/mach-powertv/asic_regs.h>
 
 #define DVR_CAPABLE     (1<<0)
@@ -40,19 +41,23 @@ enum family_type {
 	FAMILY_8600VZB,
 	FAMILY_1500VZE,
 	FAMILY_1500VZF,
+	FAMILY_8700,
 	FAMILIES
 };
 
 /* Register maps for each ASIC */
 extern const struct register_map calliope_register_map;
 extern const struct register_map cronus_register_map;
+extern const struct register_map gaia_register_map;
 extern const struct register_map zeus_register_map;
 
 extern struct resource dvr_cronus_resources[];
+extern struct resource dvr_gaia_resources[];
 extern struct resource dvr_zeus_resources[];
 extern struct resource non_dvr_calliope_resources[];
 extern struct resource non_dvr_cronus_resources[];
 extern struct resource non_dvr_cronuslite_resources[];
+extern struct resource non_dvr_gaia_resources[];
 extern struct resource non_dvr_vz_calliope_resources[];
 extern struct resource non_dvr_vze_calliope_resources[];
 extern struct resource non_dvr_vzf_calliope_resources[];
@@ -67,16 +72,24 @@ extern int platform_supports_ffs(void);
 extern int platform_supports_pcie(void);
 extern int platform_supports_display(void);
 extern void configure_platform(void);
-extern void platform_configure_usb_ehci(void);
-extern void platform_unconfigure_usb_ehci(void);
-extern void platform_configure_usb_ohci(void);
-extern void platform_unconfigure_usb_ohci(void);
 
 /* Platform Resources */
 #define ASIC_RESOURCE_GET_EXISTS 1
 extern struct resource *asic_resource_get(const char *name);
 extern void platform_release_memory(void *baddr, int size);
 
+/* USB configuration */
+struct usb_hcd;			/* Forward reference */
+extern void platform_configure_usb_ehci(void);
+extern void platform_unconfigure_usb_ehci(void);
+extern void platform_configure_usb_ohci(void);
+extern void platform_unconfigure_usb_ohci(void);
+
+/* Resource for ASIC registers */
+extern struct resource asic_resource;
+extern int platform_usb_devices_init(struct platform_device **echi_dev,
+	struct platform_device **ohci_dev);
+
 /* Reboot Cause */
 extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
 extern void set_locked_reboot_cause(char code, unsigned int data,
diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
index 6f26cb09828..20348e817b0 100644
--- a/arch/mips/include/asm/mach-powertv/asic_reg_map.h
+++ b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
@@ -64,7 +64,7 @@ REGISTER_MAP_ELEMENT(int_level_0_1)
 REGISTER_MAP_ELEMENT(int_level_0_0)
 REGISTER_MAP_ELEMENT(int_docsis_en)
 REGISTER_MAP_ELEMENT(mips_pll_setup)
-REGISTER_MAP_ELEMENT(usb_fs)
+REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl)
 REGISTER_MAP_ELEMENT(test_bus)
 REGISTER_MAP_ELEMENT(crt_spare)
 REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
index 1e11236c6db..deecb26a077 100644
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ b/arch/mips/include/asm/mach-powertv/asic_regs.h
@@ -27,7 +27,8 @@ enum asic_type {
 	ASIC_CALLIOPE,
 	ASIC_CRONUS,
 	ASIC_CRONUSLITE,
-	ASICS
+	ASIC_GAIA,
+	ASICS			/* Number of supported ASICs */
 };
 
 /* hardcoded values read from Chip Version registers */
@@ -37,6 +38,7 @@ enum asic_type {
 
 #define NAND_FLASH_BASE		0x03000000
 #define CALLIOPE_IO_BASE	0x08000000
+#define GAIA_IO_BASE		0x09000000
 #define CRONUS_IO_BASE		0x09000000
 #define ZEUS_IO_BASE		0x09000000
 
@@ -99,6 +101,7 @@ static inline void register_map_virtualize(struct register_map *map)
 }
 
 extern struct register_map _asic_register_map;
+extern unsigned long asic_phy_base;
 
 /*
  * Macros to interface to registers through their ioremapped address
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
index 5b8d5ebeb83..f76029c2406 100644
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ b/arch/mips/include/asm/mach-powertv/dma-coherence.h
@@ -65,21 +65,21 @@ static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 	size_t size)
 {
 	if (is_kseg2(addr))
-		return phys_to_bus(virt_to_phys_from_pte(addr));
+		return phys_to_dma(virt_to_phys_from_pte(addr));
 	else
-		return phys_to_bus(virt_to_phys(addr));
+		return phys_to_dma(virt_to_phys(addr));
 }
 
 static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 	struct page *page)
 {
-	return phys_to_bus(page_to_phys(page));
+	return phys_to_dma(page_to_phys(page));
 }
 
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
-	return bus_to_phys(dma_addr);
+	return dma_to_phys(dma_addr);
 }
 
 static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
index e6276d5146e..076f2eeaa57 100644
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -10,64 +10,101 @@
 #define __ASM_MACH_POWERTV_IOREMAP_H
 
 #include <linux/types.h>
+#include <linux/log2.h>
+#include <linux/compiler.h>
 
-#define LOW_MEM_BOUNDARY_PHYS	0x20000000
-#define LOW_MEM_BOUNDARY_MASK	(~(LOW_MEM_BOUNDARY_PHYS - 1))
+#include <asm/pgtable-bits.h>
+#include <asm/addrspace.h>
+
+/* We're going to mess with bits, so get sizes */
+#define IOR_BPC			8			/* Bits per char */
+#define IOR_PHYS_BITS		(IOR_BPC * sizeof(phys_addr_t))
+#define IOR_DMA_BITS		(IOR_BPC * sizeof(dma_addr_t))
 
 /*
- * The bus addresses are different than the physical addresses that
- * the processor sees by an offset. This offset varies by ASIC
- * version. Define a variable to hold the offset and some macros to
- * make the conversion simpler. */
-extern unsigned long phys_to_bus_offset;
-
-#ifdef CONFIG_HIGHMEM
-#define MEM_GAP_PHYS		0x60000000
+ * Define the granularity of physical/DMA mapping in terms of the number
+ * of bits that defines the offset within a grain. These will be the
+ * least significant bits of the address. The rest of a physical or DMA
+ * address will be used to index into an appropriate table to find the
+ * offset to add to the address to yield the corresponding DMA or physical
+ * address, respectively.
+ */
+#define IOR_LSBITS		22			/* Bits in a grain */
+
 /*
- * TODO: We will use the hard code for conversion between physical and
- * bus until the bootloader releases their device tree to us.
+ * Compute the number of most significant address bits after removing those
+ * used for the offset within a grain and then compute the number of table
+ * entries for the conversion.
  */
-#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \
-	((x) + phys_to_bus_offset) : (x))
-#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \
-	((x) - phys_to_bus_offset) : (x))
-#else
-#define phys_to_bus(x) ((x) + phys_to_bus_offset)
-#define bus_to_phys(x) ((x) - phys_to_bus_offset)
-#endif
+#define IOR_PHYS_MSBITS		(IOR_PHYS_BITS - IOR_LSBITS)
+#define IOR_NUM_PHYS_TO_DMA	((phys_addr_t) 1 << IOR_PHYS_MSBITS)
+
+#define IOR_DMA_MSBITS		(IOR_DMA_BITS - IOR_LSBITS)
+#define IOR_NUM_DMA_TO_PHYS	((dma_addr_t) 1 << IOR_DMA_MSBITS)
 
 /*
- * Determine whether the address we are given is for an ASIC device
- * Params:  addr    Address to check
- * Returns: Zero if the address is not for ASIC devices, non-zero
- *      if it is.
+ * Define data structures used as elements in the arrays for the conversion
+ * between physical and DMA addresses. We do some slightly fancy math to
+ * compute the width of the offset element of the conversion tables so
+ * that we can have the smallest conversion tables. Next, round up the
+ * sizes to the next higher power of two, i.e. the offset element will have
+ * 8, 16, 32, 64, etc. bits. This eliminates the need to mask off any
+ * bits.  Finally, we compute a shift value that puts the most significant
+ * bits of the offset into the most significant bits of the offset element.
+ * This makes it more efficient on processors without barrel shifters and
+ * easier to see the values if the conversion table is dumped in binary.
  */
-static inline int asic_is_device_addr(phys_t addr)
+#define _IOR_OFFSET_WIDTH(n)	(1 << order_base_2(n))
+#define IOR_OFFSET_WIDTH(n) \
+	(_IOR_OFFSET_WIDTH(n) < 8 ? 8 : _IOR_OFFSET_WIDTH(n))
+
+#define IOR_PHYS_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_PHYS_MSBITS)
+#define IOR_PHYS_SHIFT		(IOR_PHYS_BITS - IOR_PHYS_OFFSET_BITS)
+
+#define IOR_DMA_OFFSET_BITS	IOR_OFFSET_WIDTH(IOR_DMA_MSBITS)
+#define IOR_DMA_SHIFT		(IOR_DMA_BITS - IOR_DMA_OFFSET_BITS)
+
+struct ior_phys_to_dma {
+	dma_addr_t offset:IOR_DMA_OFFSET_BITS __packed
+		__aligned((IOR_DMA_OFFSET_BITS / IOR_BPC));
+};
+
+struct ior_dma_to_phys {
+	dma_addr_t offset:IOR_PHYS_OFFSET_BITS __packed
+		__aligned((IOR_PHYS_OFFSET_BITS / IOR_BPC));
+};
+
+extern struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
+extern struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
+
+static inline dma_addr_t _phys_to_dma_offset_raw(phys_addr_t phys)
 {
-	return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK);
+	return (dma_addr_t)_ior_phys_to_dma[phys >> IOR_LSBITS].offset;
 }
 
-/*
- * Determine whether the address we are given is external RAM mappable
- * into KSEG1.
- * Params:  addr    Address to check
- * Returns: Zero if the address is not for external RAM and
- */
-static inline int asic_is_lowmem_ram_addr(phys_t addr)
+static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
 {
-	/*
-	 * The RAM always starts at the following address in the processor's
-	 * physical address space
-	 */
-	static const phys_t phys_ram_base = 0x10000000;
-	phys_t bus_ram_base;
+	return (dma_addr_t)_ior_dma_to_phys[dma >> IOR_LSBITS].offset;
+}
 
-	bus_ram_base = phys_to_bus_offset + phys_ram_base;
+/* These are not portable and should not be used in drivers. Drivers should
+ * be using ioremap() and friends to map physical addreses to virtual
+ * addresses and dma_map*() and friends to map virtual addresses into DMA
+ * addresses and back.
+ */
+static inline dma_addr_t phys_to_dma(phys_addr_t phys)
+{
+	return phys + (_phys_to_dma_offset_raw(phys) << IOR_PHYS_SHIFT);
+}
 
-	return addr >= bus_ram_base &&
-		addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base));
+static inline phys_addr_t dma_to_phys(dma_addr_t dma)
+{
+	return dma + (_dma_to_phys_offset_raw(dma) << IOR_DMA_SHIFT);
 }
 
+extern void ioremap_add_map(dma_addr_t phys, phys_addr_t alias,
+	dma_addr_t size);
+
 /*
  * Allow physical addresses to be fixed up to help peripherals located
  * outside the low 32-bit range -- generic pass-through version.
@@ -77,10 +114,50 @@ static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	return phys_addr;
 }
 
-static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
+/*
+ * Handle the special case of addresses the area aliased into the first
+ * 512 MiB of the processor's physical address space. These turn into either
+ * kseg0 or kseg1 addresses, depending on flags.
+ */
+static inline void __iomem *plat_ioremap(phys_t start, unsigned long size,
 	unsigned long flags)
 {
-	return NULL;
+	phys_addr_t start_offset;
+	void __iomem *result = NULL;
+
+	/* Start by checking to see whether this is an aliased address */
+	start_offset = _dma_to_phys_offset_raw(start);
+
+	/*
+	 * If:
+	 * o	the memory is aliased into the first 512 MiB, and
+	 * o	the start and end are in the same RAM bank, and
+	 * o	we don't have a zero size or wrap around, and
+	 * o	we are supposed to create an uncached mapping,
+	 *	handle this is a kseg0 or kseg1 address
+	 */
+	if (start_offset != 0) {
+		phys_addr_t last;
+		dma_addr_t dma_to_phys_offset;
+
+		last = start + size - 1;
+		dma_to_phys_offset =
+			_dma_to_phys_offset_raw(last) << IOR_DMA_SHIFT;
+
+		if (dma_to_phys_offset == start_offset &&
+			size != 0 && start <= last) {
+			phys_t adjusted_start;
+			adjusted_start = start + start_offset;
+			if (flags == _CACHE_UNCACHED)
+				result = (void __iomem *) (unsigned long)
+					CKSEG1ADDR(adjusted_start);
+			else
+				result = (void __iomem *) (unsigned long)
+					CKSEG0ADDR(adjusted_start);
+		}
+	}
+
+	return result;
 }
 
 static inline int plat_iounmap(const volatile void __iomem *addr)
diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
index 913ff196259..b74caf65482 100644
--- a/arch/mips/include/asm/mach-tx49xx/kmalloc.h
+++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_MACH_TX49XX_KMALLOC_H
 #define __ASM_MACH_TX49XX_KMALLOC_H
 
-/*
- * All happy, no need to define ARCH_KMALLOC_MINALIGN
- */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
 #endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index c6e3c93ce7c..335474c155f 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -408,6 +408,7 @@
 #define  STATUSB_IP15		7
 #define  STATUSF_IP15		(_ULCAST_(1) <<  7)
 #define ST0_CH			0x00040000
+#define ST0_NMI			0x00080000
 #define ST0_SR			0x00100000
 #define ST0_TS			0x00200000
 #define ST0_BEV			0x00400000
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
index ca6214b5ccb..917a6c413b1 100644
--- a/arch/mips/include/asm/octeon/octeon.h
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -50,6 +50,7 @@ extern void octeon_crypto_disable(struct octeon_cop2_state *state,
 extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task);
 
 extern void octeon_init_cvmcount(void);
+extern void octeon_setup_delays(void);
 
 #define OCTEON_ARGV_MAX_ARGS	64
 #define OCTOEN_SERIAL_LEN	20
@@ -253,4 +254,6 @@ static inline uint32_t octeon_npi_read32(uint64_t address)
 
 extern struct cvmx_bootinfo *octeon_bootinfo;
 
+extern uint64_t octeon_bootloader_entry_addr;
+
 #endif /* __ASM_OCTEON_OCTEON_H */
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 6ac5d3e3398..ece78043acf 100644
--- a/arch/mips/include/asm/octeon/pci-octeon.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -15,6 +15,19 @@
 #define PCI_CONFIG_SPACE_DELAY 10000
 
 /*
+ * The physical memory base mapped by BAR1.  256MB at the end of the
+ * first 4GB.
+ */
+#define CVMX_PCIE_BAR1_PHYS_BASE ((1ull << 32) - (1ull << 28))
+#define CVMX_PCIE_BAR1_PHYS_SIZE (1ull << 28)
+
+/*
+ * The RC base of BAR1.  gen1 has a 39-bit BAR2, gen2 has 41-bit BAR2,
+ * place BAR1 so it is the same for both.
+ */
+#define CVMX_PCIE_BAR1_RC_BASE (1ull << 41)
+
+/*
  * pcibios_map_irq() is defined inside pci-octeon.c. All it does is
  * call the Octeon specific version pointed to by this variable. This
  * function needs to change for PCI or PCIe based hosts.
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 3beea1479b4..576397c6992 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -140,6 +140,11 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? 15 : 14;
 }
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+/* MSI arch hook for OCTEON */
+#define arch_setup_msi_irqs arch_setup_msi_irqs
+#endif
+
 extern int pci_probe_only;
 
 extern char * (*pcibios_plat_setup)(char *str);
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
index 54ef1a96d7c..786d82daf8d 100644
--- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
+++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h
@@ -124,10 +124,6 @@ extern void prom_meminit(void);
 extern void prom_fixup_mem_map(unsigned long start_mem,
 			       unsigned long end_mem);
 
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-extern bool get_ramroot(void **start, unsigned long *size);
-#endif
-
 extern int get_ethernet_addr(char *ethaddr_name, char *ethernet_addr);
 extern unsigned long get_deviceid(void);
 extern char identify_enet(unsigned long interface_num);
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 5d33b727acf..0d629bb93cb 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -34,6 +34,11 @@ extern void (*cpu_wait)(void);
 extern unsigned int vced_count, vcei_count;
 
 /*
+ * MIPS does have an arch_pick_mmap_layout()
+ */
+#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
+
+/*
  * A special page (the vdso) is mapped into all processes at the very
  * top of the virtual memory space.
  */
@@ -52,6 +57,9 @@ extern unsigned int vced_count, vcei_count;
  * space during mmap's.
  */
 #define TASK_UNMAPPED_BASE	((TASK_SIZE / 3) & ~(PAGE_SIZE))
+
+#define TASK_IS_32BIT_ADDR 1
+
 #endif
 
 #ifdef CONFIG_64BIT
@@ -77,6 +85,9 @@ extern unsigned int vced_count, vcei_count;
 		PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
 #define TASK_SIZE_OF(tsk)						\
 	(test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+
+#define TASK_IS_32BIT_ADDR test_thread_flag(TIF_32BIT_ADDR)
+
 #endif
 
 #ifdef __KERNEL__
@@ -218,7 +229,6 @@ struct thread_struct {
 	unsigned long cp0_badvaddr;	/* Last user fault */
 	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
 	unsigned long error_code;
-	unsigned long trap_no;
 	unsigned long irix_trampoline;  /* Wheee... */
 	unsigned long irix_oldctx;
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
@@ -290,7 +300,6 @@ struct thread_struct {
 	.cp0_badvaddr		= 0,				\
 	.cp0_baduaddr		= 0,				\
 	.error_code		= 0,				\
-	.trap_no		= 0,				\
 	.irix_trampoline	= 0,				\
 	.irix_oldctx		= 0,				\
 	/*							\
diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index cdc6a46efd9..9f1b8dba2c8 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -137,6 +137,7 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
  */
 #define user_mode(regs) (((regs)->cp0_status & KU_MASK) == KU_USER)
 
+#define regs_return_value(_regs) ((_regs)->regs[2])
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h
index ac4ea85c3a5..dc81114d474 100644
--- a/arch/mips/include/asm/sn/agent.h
+++ b/arch/mips/include/asm/sn/agent.h
@@ -11,7 +11,6 @@
 #ifndef _ASM_SGI_SN_AGENT_H
 #define _ASM_SGI_SN_AGENT_H
 
-#include <linux/topology.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
 
diff --git a/arch/mips/include/asm/uasm.h b/arch/mips/include/asm/uasm.h
index 697e40c0649..892062d6d74 100644
--- a/arch/mips/include/asm/uasm.h
+++ b/arch/mips/include/asm/uasm.h
@@ -10,44 +10,55 @@
 
 #include <linux/types.h>
 
+#ifdef CONFIG_EXPORT_UASM
+#include <linux/module.h>
+#define __uasminit
+#define __uasminitdata
+#define UASM_EXPORT_SYMBOL(sym) EXPORT_SYMBOL(sym)
+#else
+#define __uasminit __cpuinit
+#define __uasminitdata __cpuinitdata
+#define UASM_EXPORT_SYMBOL(sym)
+#endif
+
 #define Ip_u1u2u3(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u2u1u3(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u3u1u2(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u1u2s3(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
 
 #define Ip_u2s3u1(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
 
 #define Ip_u2u1s3(op)							\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
 
 #define Ip_u2u1msbu3(op)						\
-void __cpuinit								\
+void __uasminit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c,	\
 	   unsigned int d)
 
 #define Ip_u1u2(op)							\
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
+void __uasminit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
 
 #define Ip_u1s2(op)							\
-void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
+void __uasminit uasm_i##op(u32 **buf, unsigned int a, signed int b)
 
-#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
+#define Ip_u1(op) void __uasminit uasm_i##op(u32 **buf, unsigned int a)
 
-#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
+#define Ip_0(op) void __uasminit uasm_i##op(u32 **buf)
 
 Ip_u2u1s3(_addiu);
 Ip_u3u1u2(_addu);
@@ -71,6 +82,7 @@ Ip_u2u1u3(_dsra);
 Ip_u2u1u3(_dsrl);
 Ip_u2u1u3(_dsrl32);
 Ip_u2u1u3(_drotr);
+Ip_u2u1u3(_drotr32);
 Ip_u3u1u2(_dsubu);
 Ip_0(_eret);
 Ip_u1(_j);
@@ -111,7 +123,7 @@ struct uasm_label {
 	int lab;
 };
 
-void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
+void __uasminit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
 #ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
 #endif
@@ -121,7 +133,7 @@ void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
 void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
 
 #define UASM_L_LA(lb)							\
-static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
+static inline void __uasminit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
 {									\
 	uasm_build_label(lab, addr, label##lb);				\
 }
@@ -176,6 +188,15 @@ static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
 		uasm_i_dsrl32(p, a1, a2, a3 - 32);
 }
 
+static inline void uasm_i_drotr_safe(u32 **p, unsigned int a1,
+				     unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_drotr(p, a1, a2, a3);
+	else
+		uasm_i_drotr32(p, a1, a2, a3 - 32);
+}
+
 static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
 				    unsigned int a2, unsigned int a3)
 {
@@ -213,3 +234,7 @@ void uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
 void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
 void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
 void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bbit0(u32 **p, struct uasm_reloc **r, unsigned int reg,
+		   unsigned int bit, int lid);
+void uasm_il_bbit1(u32 **p, struct uasm_reloc **r, unsigned int reg,
+		   unsigned int bit, int lid);
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile
index 5aee0c266d1..dd9d99bfcf7 100644
--- a/arch/mips/jazz/Makefile
+++ b/arch/mips/jazz/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	 	:= irq.o jazzdma.o reset.o setup.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jazz/Platform b/arch/mips/jazz/Platform
new file mode 100644
index 00000000000..3373788acca
--- /dev/null
+++ b/arch/mips/jazz/Platform
@@ -0,0 +1,6 @@
+#
+# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+#
+platform-$(CONFIG_MACH_JAZZ)	+= jazz/
+cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctree)/arch/mips/include/asm/mach-jazz
+load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
new file mode 100644
index 00000000000..3e7141f0746
--- /dev/null
+++ b/arch/mips/jz4740/Kconfig
@@ -0,0 +1,12 @@
+choice
+	prompt "Machine type"
+	depends on MACH_JZ4740
+	default JZ4740_QI_LB60
+
+config JZ4740_QI_LB60
+	bool "Qi Hardware Ben NanoNote"
+
+endchoice
+
+config HAVE_PWM
+	bool
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
new file mode 100644
index 00000000000..a604eaeb6c0
--- /dev/null
+++ b/arch/mips/jz4740/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the Ingenic JZ4740.
+#
+
+# Object file lists.
+
+obj-y += prom.o irq.o time.o reset.o setup.o dma.o \
+	gpio.o clock.o platform.o timer.o pwm.o serial.o
+
+obj-$(CONFIG_DEBUG_FS) += clock-debugfs.o
+
+# board specific support
+
+obj-$(CONFIG_JZ4740_QI_LB60)	+= board-qi_lb60.o
+
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+
+EXTRA_CFLAGS += -Werror -Wall
diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
new file mode 100644
index 00000000000..6a97230e3d0
--- /dev/null
+++ b/arch/mips/jz4740/Platform
@@ -0,0 +1,3 @@
+core-$(CONFIG_MACH_JZ4740)	+= arch/mips/jz4740/
+cflags-$(CONFIG_MACH_JZ4740)	+= -I$(srctree)/arch/mips/include/asm/mach-jz4740
+load-$(CONFIG_MACH_JZ4740)	+= 0xffffffff80010000
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
new file mode 100644
index 00000000000..5742bb4d78f
--- /dev/null
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -0,0 +1,471 @@
+/*
+ * linux/arch/mips/jz4740/board-qi_lb60.c
+ *
+ * QI_LB60 board support
+ *
+ * Copyright (c) 2009 Qi Hardware inc.,
+ * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
+ * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 or later
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/power_supply.h>
+#include <linux/power/jz4740-battery.h>
+
+#include <asm/mach-jz4740/jz4740_fb.h>
+#include <asm/mach-jz4740/jz4740_mmc.h>
+#include <asm/mach-jz4740/jz4740_nand.h>
+
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/leds_pwm.h>
+
+#include <asm/mach-jz4740/platform.h>
+
+#include "clock.h"
+
+static bool is_avt2;
+
+/* GPIOs */
+#define QI_LB60_GPIO_SD_CD		JZ_GPIO_PORTD(0)
+#define QI_LB60_GPIO_SD_VCC_EN_N	JZ_GPIO_PORTD(2)
+
+#define QI_LB60_GPIO_KEYOUT(x)		(JZ_GPIO_PORTC(10) + (x))
+#define QI_LB60_GPIO_KEYIN(x)		(JZ_GPIO_PORTD(18) + (x))
+#define QI_LB60_GPIO_KEYIN8		JZ_GPIO_PORTD(26)
+
+/* NAND */
+static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
+/*	.eccbytes = 36,
+	.eccpos = {
+		6,  7,  8,  9,  10, 11, 12, 13,
+		14, 15, 16, 17, 18, 19, 20, 21,
+		22, 23, 24, 25, 26, 27, 28, 29,
+		30, 31, 32, 33, 34, 35, 36, 37,
+		38, 39, 40, 41
+	},*/
+	.oobfree = {
+		{ .offset = 2, .length = 4 },
+		{ .offset = 42, .length = 22 }
+	},
+};
+
+/* Early prototypes of the QI LB60 had only 1GB of NAND.
+ * In order to support these devices aswell the partition and ecc layout is
+ * initalized depending on the NAND size */
+static struct mtd_partition qi_lb60_partitions_1gb[] = {
+	{
+		.name = "NAND BOOT partition",
+		.offset = 0 * 0x100000,
+		.size = 4 * 0x100000,
+	},
+	{
+		.name = "NAND KERNEL partition",
+		.offset = 4 * 0x100000,
+		.size = 4 * 0x100000,
+	},
+	{
+		.name = "NAND ROOTFS partition",
+		.offset = 8 * 0x100000,
+		.size = (504 + 512) * 0x100000,
+	},
+};
+
+static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
+/*	.eccbytes = 72,
+	.eccpos = {
+		12, 13, 14, 15, 16, 17, 18, 19,
+		20, 21, 22, 23, 24, 25, 26, 27,
+		28, 29, 30, 31, 32, 33, 34, 35,
+		36, 37, 38, 39, 40, 41, 42, 43,
+		44, 45, 46, 47, 48, 49, 50, 51,
+		52, 53, 54, 55, 56, 57, 58, 59,
+		60, 61, 62, 63, 64, 65, 66, 67,
+		68, 69, 70, 71, 72, 73, 74, 75,
+		76, 77, 78, 79, 80, 81, 82, 83
+	},*/
+	.oobfree = {
+		{ .offset = 2, .length = 10 },
+		{ .offset = 84, .length = 44 },
+	},
+};
+
+static struct mtd_partition qi_lb60_partitions_2gb[] = {
+	{
+		.name = "NAND BOOT partition",
+		.offset = 0 * 0x100000,
+		.size = 4 * 0x100000,
+	},
+	{
+		.name = "NAND KERNEL partition",
+		.offset = 4 * 0x100000,
+		.size = 4 * 0x100000,
+	},
+	{
+		.name = "NAND ROOTFS partition",
+		.offset = 8 * 0x100000,
+		.size = (504 + 512 + 1024) * 0x100000,
+	},
+};
+
+static void qi_lb60_nand_ident(struct platform_device *pdev,
+		struct nand_chip *chip, struct mtd_partition **partitions,
+		int *num_partitions)
+{
+	if (chip->page_shift == 12) {
+		chip->ecc.layout = &qi_lb60_ecclayout_2gb;
+		*partitions = qi_lb60_partitions_2gb;
+		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
+	} else {
+		chip->ecc.layout = &qi_lb60_ecclayout_1gb;
+		*partitions = qi_lb60_partitions_1gb;
+		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
+	}
+}
+
+static struct jz_nand_platform_data qi_lb60_nand_pdata = {
+	.ident_callback = qi_lb60_nand_ident,
+	.busy_gpio = 94,
+};
+
+/* Keyboard*/
+
+#define KEY_QI_QI	KEY_F13
+#define KEY_QI_UPRED	KEY_RIGHTALT
+#define KEY_QI_VOLUP	KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
+#define KEY_QI_FN	KEY_LEFTCTRL
+
+static const uint32_t qi_lb60_keymap[] = {
+	KEY(0, 0, KEY_F1),	/* S2 */
+	KEY(0, 1, KEY_F2),	/* S3 */
+	KEY(0, 2, KEY_F3),	/* S4 */
+	KEY(0, 3, KEY_F4),	/* S5 */
+	KEY(0, 4, KEY_F5),	/* S6 */
+	KEY(0, 5, KEY_F6),	/* S7 */
+	KEY(0, 6, KEY_F7),	/* S8 */
+
+	KEY(1, 0, KEY_Q),	/* S10 */
+	KEY(1, 1, KEY_W),	/* S11 */
+	KEY(1, 2, KEY_E),	/* S12 */
+	KEY(1, 3, KEY_R),	/* S13 */
+	KEY(1, 4, KEY_T),	/* S14 */
+	KEY(1, 5, KEY_Y),	/* S15 */
+	KEY(1, 6, KEY_U),	/* S16 */
+	KEY(1, 7, KEY_I),	/* S17 */
+	KEY(2, 0, KEY_A),	/* S18 */
+	KEY(2, 1, KEY_S),	/* S19 */
+	KEY(2, 2, KEY_D),	/* S20 */
+	KEY(2, 3, KEY_F),	/* S21 */
+	KEY(2, 4, KEY_G),	/* S22 */
+	KEY(2, 5, KEY_H),	/* S23 */
+	KEY(2, 6, KEY_J),	/* S24 */
+	KEY(2, 7, KEY_K),	/* S25 */
+	KEY(3, 0, KEY_ESC),	/* S26 */
+	KEY(3, 1, KEY_Z),	/* S27 */
+	KEY(3, 2, KEY_X),	/* S28 */
+	KEY(3, 3, KEY_C),	/* S29 */
+	KEY(3, 4, KEY_V),	/* S30 */
+	KEY(3, 5, KEY_B),	/* S31 */
+	KEY(3, 6, KEY_N),	/* S32 */
+	KEY(3, 7, KEY_M),	/* S33 */
+	KEY(4, 0, KEY_TAB),	/* S34 */
+	KEY(4, 1, KEY_CAPSLOCK),	/* S35 */
+	KEY(4, 2, KEY_BACKSLASH),	/* S36 */
+	KEY(4, 3, KEY_APOSTROPHE),	/* S37 */
+	KEY(4, 4, KEY_COMMA),	/* S38 */
+	KEY(4, 5, KEY_DOT),	/* S39 */
+	KEY(4, 6, KEY_SLASH),	/* S40 */
+	KEY(4, 7, KEY_UP),	/* S41 */
+	KEY(5, 0, KEY_O),	/* S42 */
+	KEY(5, 1, KEY_L),	/* S43 */
+	KEY(5, 2, KEY_EQUAL),	/* S44 */
+	KEY(5, 3, KEY_QI_UPRED),	/* S45 */
+	KEY(5, 4, KEY_SPACE),	/* S46 */
+	KEY(5, 5, KEY_QI_QI),	/* S47 */
+	KEY(5, 6, KEY_RIGHTCTRL),	/* S48 */
+	KEY(5, 7, KEY_LEFT),	/* S49 */
+	KEY(6, 0, KEY_F8),	/* S50 */
+	KEY(6, 1, KEY_P),	/* S51 */
+	KEY(6, 2, KEY_BACKSPACE),/* S52 */
+	KEY(6, 3, KEY_ENTER),	/* S53 */
+	KEY(6, 4, KEY_QI_VOLUP),	/* S54 */
+	KEY(6, 5, KEY_QI_VOLDOWN),	/* S55 */
+	KEY(6, 6, KEY_DOWN),	/* S56 */
+	KEY(6, 7, KEY_RIGHT),	/* S57 */
+
+	KEY(7, 0, KEY_LEFTSHIFT),	/* S58 */
+	KEY(7, 1, KEY_LEFTALT),	/* S59 */
+	KEY(7, 2, KEY_QI_FN),	/* S60 */
+};
+
+static const struct matrix_keymap_data qi_lb60_keymap_data = {
+	.keymap		= qi_lb60_keymap,
+	.keymap_size	= ARRAY_SIZE(qi_lb60_keymap),
+};
+
+static const unsigned int qi_lb60_keypad_cols[] = {
+	QI_LB60_GPIO_KEYOUT(0),
+	QI_LB60_GPIO_KEYOUT(1),
+	QI_LB60_GPIO_KEYOUT(2),
+	QI_LB60_GPIO_KEYOUT(3),
+	QI_LB60_GPIO_KEYOUT(4),
+	QI_LB60_GPIO_KEYOUT(5),
+	QI_LB60_GPIO_KEYOUT(6),
+	QI_LB60_GPIO_KEYOUT(7),
+};
+
+static const unsigned int qi_lb60_keypad_rows[] = {
+	QI_LB60_GPIO_KEYIN(0),
+	QI_LB60_GPIO_KEYIN(1),
+	QI_LB60_GPIO_KEYIN(2),
+	QI_LB60_GPIO_KEYIN(3),
+	QI_LB60_GPIO_KEYIN(4),
+	QI_LB60_GPIO_KEYIN(5),
+	QI_LB60_GPIO_KEYIN(7),
+	QI_LB60_GPIO_KEYIN8,
+};
+
+static struct matrix_keypad_platform_data qi_lb60_pdata = {
+	.keymap_data = &qi_lb60_keymap_data,
+	.col_gpios	= qi_lb60_keypad_cols,
+	.row_gpios	= qi_lb60_keypad_rows,
+	.num_col_gpios	= ARRAY_SIZE(qi_lb60_keypad_cols),
+	.num_row_gpios	= ARRAY_SIZE(qi_lb60_keypad_rows),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+	.active_low		= 1,
+};
+
+static struct platform_device qi_lb60_keypad = {
+	.name		= "matrix-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &qi_lb60_pdata,
+	},
+};
+
+/* Display */
+static struct fb_videomode qi_lb60_video_modes[] = {
+	{
+		.name = "320x240",
+		.xres = 320,
+		.yres = 240,
+		.refresh = 30,
+		.left_margin = 140,
+		.right_margin = 273,
+		.upper_margin = 20,
+		.lower_margin = 2,
+		.hsync_len = 1,
+		.vsync_len = 1,
+		.sync = 0,
+		.vmode = FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
+	.width		= 60,
+	.height		= 45,
+	.num_modes	= ARRAY_SIZE(qi_lb60_video_modes),
+	.modes		= qi_lb60_video_modes,
+	.bpp		= 24,
+	.lcd_type	= JZ_LCD_TYPE_8BIT_SERIAL,
+	.pixclk_falling_edge = 1,
+};
+
+struct spi_gpio_platform_data spigpio_platform_data = {
+	.sck = JZ_GPIO_PORTC(23),
+	.mosi = JZ_GPIO_PORTC(22),
+	.miso = -1,
+	.num_chipselect = 1,
+};
+
+static struct platform_device spigpio_device = {
+	.name = "spi_gpio",
+	.id   = 1,
+	.dev = {
+		.platform_data = &spigpio_platform_data,
+	},
+};
+
+static struct spi_board_info qi_lb60_spi_board_info[] = {
+	{
+		.modalias = "ili8960",
+		.controller_data = (void *)JZ_GPIO_PORTC(21),
+		.chip_select = 0,
+		.bus_num = 1,
+		.max_speed_hz = 30 * 1000,
+		.mode = SPI_3WIRE,
+	},
+};
+
+/* Battery */
+static struct jz_battery_platform_data qi_lb60_battery_pdata = {
+	.gpio_charge =  JZ_GPIO_PORTC(27),
+	.gpio_charge_active_low = 1,
+	.info = {
+		.name = "battery",
+		.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+		.voltage_max_design = 4200000,
+		.voltage_min_design = 3600000,
+	},
+};
+
+/* GPIO Key: power */
+static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
+	[0] = {
+		.code		= KEY_POWER,
+		.gpio		= JZ_GPIO_PORTD(29),
+		.active_low	= 1,
+		.desc		= "Power",
+		.wakeup		= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
+	.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
+	.buttons = qi_lb60_gpio_keys_buttons,
+};
+
+static struct platform_device qi_lb60_gpio_keys = {
+	.name =	"gpio-keys",
+	.id =	-1,
+	.dev = {
+		.platform_data = &qi_lb60_gpio_keys_data,
+	}
+};
+
+static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
+	.gpio_card_detect	= QI_LB60_GPIO_SD_CD,
+	.gpio_read_only		= -1,
+	.gpio_power		= QI_LB60_GPIO_SD_VCC_EN_N,
+	.power_active_low	= 1,
+};
+
+/* OHCI */
+static struct regulator_consumer_supply avt2_usb_regulator_consumer =
+	REGULATOR_SUPPLY("vbus", "jz4740-ohci");
+
+static struct regulator_init_data avt2_usb_regulator_init_data = {
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &avt2_usb_regulator_consumer,
+	.constraints = {
+		.name = "USB power",
+		.min_uV = 5000000,
+		.max_uV = 5000000,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct fixed_voltage_config avt2_usb_regulator_data = {
+	.supply_name = "USB power",
+	.microvolts = 5000000,
+	.gpio = JZ_GPIO_PORTB(17),
+	.init_data = &avt2_usb_regulator_init_data,
+};
+
+static struct platform_device avt2_usb_regulator_device = {
+	.name = "reg-fixed-voltage",
+	.id = -1,
+	.dev = {
+		.platform_data = &avt2_usb_regulator_data,
+	}
+};
+
+/* beeper */
+static struct platform_device qi_lb60_pwm_beeper = {
+	.name = "pwm-beeper",
+	.id = -1,
+	.dev = {
+		.platform_data = (void *)4,
+	},
+};
+
+static struct platform_device *jz_platform_devices[] __initdata = {
+	&jz4740_udc_device,
+	&jz4740_mmc_device,
+	&jz4740_nand_device,
+	&qi_lb60_keypad,
+	&spigpio_device,
+	&jz4740_framebuffer_device,
+	&jz4740_pcm_device,
+	&jz4740_i2s_device,
+	&jz4740_codec_device,
+	&jz4740_rtc_device,
+	&jz4740_adc_device,
+	&qi_lb60_gpio_keys,
+	&qi_lb60_pwm_beeper,
+};
+
+static void __init board_gpio_setup(void)
+{
+	/* We only need to enable/disable pullup here for pins used in generic
+	 * drivers. Everything else is done by the drivers themselfs. */
+	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_VCC_EN_N);
+	jz_gpio_disable_pullup(QI_LB60_GPIO_SD_CD);
+}
+
+static int __init qi_lb60_init_platform_devices(void)
+{
+	jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
+	jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
+	jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata;
+	jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
+
+	jz4740_serial_device_register();
+
+	spi_register_board_info(qi_lb60_spi_board_info,
+				ARRAY_SIZE(qi_lb60_spi_board_info));
+
+	if (is_avt2) {
+		platform_device_register(&avt2_usb_regulator_device);
+		platform_device_register(&jz4740_usb_ohci_device);
+	}
+
+	return platform_add_devices(jz_platform_devices,
+					ARRAY_SIZE(jz_platform_devices));
+
+}
+
+struct jz4740_clock_board_data jz4740_clock_bdata = {
+	.ext_rate = 12000000,
+	.rtc_rate = 32768,
+};
+
+static __init int board_avt2(char *str)
+{
+	qi_lb60_mmc_pdata.card_detect_active_low = 1;
+	is_avt2 = true;
+
+	return 1;
+}
+__setup("avt2", board_avt2);
+
+static int __init qi_lb60_board_setup(void)
+{
+	printk(KERN_INFO "Qi Hardware JZ4740 QI %s setup\n",
+		is_avt2 ? "AVT2" : "LB60");
+
+	board_gpio_setup();
+
+	if (qi_lb60_init_platform_devices())
+		panic("Failed to initalize platform devices\n");
+
+	return 0;
+}
+arch_initcall(qi_lb60_board_setup);
diff --git a/arch/mips/jz4740/clock-debugfs.c b/arch/mips/jz4740/clock-debugfs.c
new file mode 100644
index 00000000000..330a0f2bf17
--- /dev/null
+++ b/arch/mips/jz4740/clock-debugfs.c
@@ -0,0 +1,109 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC clock support debugfs entries
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach-jz4740/clock.h>
+#include "clock.h"
+
+static struct dentry *jz4740_clock_debugfs;
+
+static int jz4740_clock_debugfs_show_enabled(void *data, uint64_t *value)
+{
+	struct clk *clk = data;
+	*value = clk_is_enabled(clk);
+
+	return 0;
+}
+
+static int jz4740_clock_debugfs_set_enabled(void *data, uint64_t value)
+{
+	struct clk *clk = data;
+
+	if (value)
+		return clk_enable(clk);
+	else
+		clk_disable(clk);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_enabled,
+	jz4740_clock_debugfs_show_enabled,
+	jz4740_clock_debugfs_set_enabled,
+	"%llu\n");
+
+static int jz4740_clock_debugfs_show_rate(void *data, uint64_t *value)
+{
+	struct clk *clk = data;
+	*value = clk_get_rate(clk);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(jz4740_clock_debugfs_ops_rate,
+	jz4740_clock_debugfs_show_rate,
+	NULL,
+	"%llu\n");
+
+void jz4740_clock_debugfs_add_clk(struct clk *clk)
+{
+	if (!jz4740_clock_debugfs)
+		return;
+
+	clk->debugfs_entry = debugfs_create_dir(clk->name, jz4740_clock_debugfs);
+	debugfs_create_file("rate", S_IWUGO | S_IRUGO, clk->debugfs_entry, clk,
+				&jz4740_clock_debugfs_ops_rate);
+	debugfs_create_file("enabled", S_IRUGO, clk->debugfs_entry, clk,
+				&jz4740_clock_debugfs_ops_enabled);
+
+	if (clk->parent) {
+		char parent_path[100];
+		snprintf(parent_path, 100, "../%s", clk->parent->name);
+		clk->debugfs_parent_entry = debugfs_create_symlink("parent",
+						clk->debugfs_entry,
+						parent_path);
+	}
+}
+
+/* TODO: Locking */
+void jz4740_clock_debugfs_update_parent(struct clk *clk)
+{
+	if (clk->debugfs_parent_entry)
+		debugfs_remove(clk->debugfs_parent_entry);
+
+	if (clk->parent) {
+		char parent_path[100];
+		snprintf(parent_path, 100, "../%s", clk->parent->name);
+		clk->debugfs_parent_entry = debugfs_create_symlink("parent",
+						clk->debugfs_entry,
+						parent_path);
+	} else {
+		clk->debugfs_parent_entry = NULL;
+	}
+}
+
+void jz4740_clock_debugfs_init(void)
+{
+	jz4740_clock_debugfs = debugfs_create_dir("jz4740-clock", NULL);
+	if (IS_ERR(jz4740_clock_debugfs))
+		jz4740_clock_debugfs = NULL;
+}
diff --git a/arch/mips/jz4740/clock.c b/arch/mips/jz4740/clock.c
new file mode 100644
index 00000000000..118a8a5562d
--- /dev/null
+++ b/arch/mips/jz4740/clock.c
@@ -0,0 +1,924 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC clock support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+
+#include <asm/mach-jz4740/clock.h>
+#include <asm/mach-jz4740/base.h>
+
+#include "clock.h"
+
+#define JZ_REG_CLOCK_CTRL	0x00
+#define JZ_REG_CLOCK_LOW_POWER	0x04
+#define JZ_REG_CLOCK_PLL	0x10
+#define JZ_REG_CLOCK_GATE	0x20
+#define JZ_REG_CLOCK_SLEEP_CTRL	0x24
+#define JZ_REG_CLOCK_I2S	0x60
+#define JZ_REG_CLOCK_LCD	0x64
+#define JZ_REG_CLOCK_MMC	0x68
+#define JZ_REG_CLOCK_UHC	0x6C
+#define JZ_REG_CLOCK_SPI	0x74
+
+#define JZ_CLOCK_CTRL_I2S_SRC_PLL	BIT(31)
+#define JZ_CLOCK_CTRL_KO_ENABLE		BIT(30)
+#define JZ_CLOCK_CTRL_UDC_SRC_PLL	BIT(29)
+#define JZ_CLOCK_CTRL_UDIV_MASK		0x1f800000
+#define JZ_CLOCK_CTRL_CHANGE_ENABLE	BIT(22)
+#define JZ_CLOCK_CTRL_PLL_HALF		BIT(21)
+#define JZ_CLOCK_CTRL_LDIV_MASK		0x001f0000
+#define JZ_CLOCK_CTRL_UDIV_OFFSET	23
+#define JZ_CLOCK_CTRL_LDIV_OFFSET	16
+#define JZ_CLOCK_CTRL_MDIV_OFFSET	12
+#define JZ_CLOCK_CTRL_PDIV_OFFSET	 8
+#define JZ_CLOCK_CTRL_HDIV_OFFSET	 4
+#define JZ_CLOCK_CTRL_CDIV_OFFSET	 0
+
+#define JZ_CLOCK_GATE_UART0	BIT(0)
+#define JZ_CLOCK_GATE_TCU	BIT(1)
+#define JZ_CLOCK_GATE_RTC	BIT(2)
+#define JZ_CLOCK_GATE_I2C	BIT(3)
+#define JZ_CLOCK_GATE_SPI	BIT(4)
+#define JZ_CLOCK_GATE_AIC	BIT(5)
+#define JZ_CLOCK_GATE_I2S	BIT(6)
+#define JZ_CLOCK_GATE_MMC	BIT(7)
+#define JZ_CLOCK_GATE_ADC	BIT(8)
+#define JZ_CLOCK_GATE_CIM	BIT(9)
+#define JZ_CLOCK_GATE_LCD	BIT(10)
+#define JZ_CLOCK_GATE_UDC	BIT(11)
+#define JZ_CLOCK_GATE_DMAC	BIT(12)
+#define JZ_CLOCK_GATE_IPU	BIT(13)
+#define JZ_CLOCK_GATE_UHC	BIT(14)
+#define JZ_CLOCK_GATE_UART1	BIT(15)
+
+#define JZ_CLOCK_I2S_DIV_MASK		0x01ff
+
+#define JZ_CLOCK_LCD_DIV_MASK		0x01ff
+
+#define JZ_CLOCK_MMC_DIV_MASK		0x001f
+
+#define JZ_CLOCK_UHC_DIV_MASK		0x000f
+
+#define JZ_CLOCK_SPI_SRC_PLL		BIT(31)
+#define JZ_CLOCK_SPI_DIV_MASK		0x000f
+
+#define JZ_CLOCK_PLL_M_MASK		0x01ff
+#define JZ_CLOCK_PLL_N_MASK		0x001f
+#define JZ_CLOCK_PLL_OD_MASK		0x0003
+#define JZ_CLOCK_PLL_STABLE		BIT(10)
+#define JZ_CLOCK_PLL_BYPASS		BIT(9)
+#define JZ_CLOCK_PLL_ENABLED		BIT(8)
+#define JZ_CLOCK_PLL_STABLIZE_MASK	0x000f
+#define JZ_CLOCK_PLL_M_OFFSET		23
+#define JZ_CLOCK_PLL_N_OFFSET		18
+#define JZ_CLOCK_PLL_OD_OFFSET		16
+
+#define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
+#define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
+
+#define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
+#define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
+
+static void __iomem *jz_clock_base;
+static spinlock_t jz_clock_lock;
+static LIST_HEAD(jz_clocks);
+
+struct main_clk {
+	struct clk clk;
+	uint32_t div_offset;
+};
+
+struct divided_clk {
+	struct clk clk;
+	uint32_t reg;
+	uint32_t mask;
+};
+
+struct static_clk {
+	struct clk clk;
+	unsigned long rate;
+};
+
+static uint32_t jz_clk_reg_read(int reg)
+{
+	return readl(jz_clock_base + reg);
+}
+
+static void jz_clk_reg_write_mask(int reg, uint32_t val, uint32_t mask)
+{
+	uint32_t val2;
+
+	spin_lock(&jz_clock_lock);
+	val2 = readl(jz_clock_base + reg);
+	val2 &= ~mask;
+	val2 |= val;
+	writel(val2, jz_clock_base + reg);
+	spin_unlock(&jz_clock_lock);
+}
+
+static void jz_clk_reg_set_bits(int reg, uint32_t mask)
+{
+	uint32_t val;
+
+	spin_lock(&jz_clock_lock);
+	val = readl(jz_clock_base + reg);
+	val |= mask;
+	writel(val, jz_clock_base + reg);
+	spin_unlock(&jz_clock_lock);
+}
+
+static void jz_clk_reg_clear_bits(int reg, uint32_t mask)
+{
+	uint32_t val;
+
+	spin_lock(&jz_clock_lock);
+	val = readl(jz_clock_base + reg);
+	val &= ~mask;
+	writel(val, jz_clock_base + reg);
+	spin_unlock(&jz_clock_lock);
+}
+
+static int jz_clk_enable_gating(struct clk *clk)
+{
+	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
+		return -EINVAL;
+
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
+	return 0;
+}
+
+static int jz_clk_disable_gating(struct clk *clk)
+{
+	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
+		return -EINVAL;
+
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, clk->gate_bit);
+	return 0;
+}
+
+static int jz_clk_is_enabled_gating(struct clk *clk)
+{
+	if (clk->gate_bit == JZ4740_CLK_NOT_GATED)
+		return 1;
+
+	return !(jz_clk_reg_read(JZ_REG_CLOCK_GATE) & clk->gate_bit);
+}
+
+static unsigned long jz_clk_static_get_rate(struct clk *clk)
+{
+	return ((struct static_clk *)clk)->rate;
+}
+
+static int jz_clk_ko_enable(struct clk *clk)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
+	return 0;
+}
+
+static int jz_clk_ko_disable(struct clk *clk)
+{
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_KO_ENABLE);
+	return 0;
+}
+
+static int jz_clk_ko_is_enabled(struct clk *clk)
+{
+	return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
+}
+
+static const int pllno[] = {1, 2, 2, 4};
+
+static unsigned long jz_clk_pll_get_rate(struct clk *clk)
+{
+	uint32_t val;
+	int m;
+	int n;
+	int od;
+
+	val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
+
+	if (val & JZ_CLOCK_PLL_BYPASS)
+		return clk_get_rate(clk->parent);
+
+	m = ((val >> 23) & 0x1ff) + 2;
+	n = ((val >> 18) & 0x1f) + 2;
+	od = (val >> 16) & 0x3;
+
+	return ((clk_get_rate(clk->parent) / n) * m) / pllno[od];
+}
+
+static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
+{
+	uint32_t reg;
+
+	reg = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
+	if (reg & JZ_CLOCK_CTRL_PLL_HALF)
+		return jz_clk_pll_get_rate(clk->parent);
+	return jz_clk_pll_get_rate(clk->parent) >> 1;
+}
+
+static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
+	int div;
+
+	div = parent_rate / rate;
+	if (div > 32)
+		return parent_rate / 32;
+	else if (div < 1)
+		return parent_rate;
+
+	div &= (0x3 << (ffs(div) - 1));
+
+	return parent_rate / div;
+}
+
+static unsigned long jz_clk_main_get_rate(struct clk *clk)
+{
+	struct main_clk *mclk = (struct main_clk *)clk;
+	uint32_t div;
+
+	div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
+
+	div >>= mclk->div_offset;
+	div &= 0xf;
+
+	if (div >= ARRAY_SIZE(jz_clk_main_divs))
+		div = ARRAY_SIZE(jz_clk_main_divs) - 1;
+
+	return jz_clk_pll_get_rate(clk->parent) / jz_clk_main_divs[div];
+}
+
+static int jz_clk_main_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct main_clk *mclk = (struct main_clk *)clk;
+	int i;
+	int div;
+	unsigned long parent_rate = jz_clk_pll_get_rate(clk->parent);
+
+	rate = jz_clk_main_round_rate(clk, rate);
+
+	div = parent_rate / rate;
+
+	i = (ffs(div) - 1) << 1;
+	if (i > 0 && !(div & BIT(i-1)))
+		i -= 1;
+
+	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, i << mclk->div_offset,
+				0xf << mclk->div_offset);
+
+	return 0;
+}
+
+static struct clk_ops jz_clk_static_ops = {
+	.get_rate = jz_clk_static_get_rate,
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+};
+
+static struct static_clk jz_clk_ext = {
+	.clk = {
+		.name = "ext",
+		.gate_bit = JZ4740_CLK_NOT_GATED,
+		.ops = &jz_clk_static_ops,
+	},
+};
+
+static struct clk_ops jz_clk_pll_ops = {
+	.get_rate = jz_clk_pll_get_rate,
+};
+
+static struct clk jz_clk_pll = {
+	.name = "pll",
+	.parent = &jz_clk_ext.clk,
+	.ops = &jz_clk_pll_ops,
+};
+
+static struct clk_ops jz_clk_pll_half_ops = {
+	.get_rate = jz_clk_pll_half_get_rate,
+};
+
+static struct clk jz_clk_pll_half = {
+	.name = "pll half",
+	.parent = &jz_clk_pll,
+	.ops = &jz_clk_pll_half_ops,
+};
+
+static const struct clk_ops jz_clk_main_ops = {
+	.get_rate = jz_clk_main_get_rate,
+	.set_rate = jz_clk_main_set_rate,
+	.round_rate = jz_clk_main_round_rate,
+};
+
+static struct main_clk jz_clk_cpu = {
+	.clk = {
+		.name = "cclk",
+		.parent = &jz_clk_pll,
+		.ops = &jz_clk_main_ops,
+	},
+	.div_offset = JZ_CLOCK_CTRL_CDIV_OFFSET,
+};
+
+static struct main_clk jz_clk_memory = {
+	.clk = {
+		.name = "mclk",
+		.parent = &jz_clk_pll,
+		.ops = &jz_clk_main_ops,
+	},
+	.div_offset = JZ_CLOCK_CTRL_MDIV_OFFSET,
+};
+
+static struct main_clk jz_clk_high_speed_peripheral = {
+	.clk = {
+		.name = "hclk",
+		.parent = &jz_clk_pll,
+		.ops = &jz_clk_main_ops,
+	},
+	.div_offset = JZ_CLOCK_CTRL_HDIV_OFFSET,
+};
+
+
+static struct main_clk jz_clk_low_speed_peripheral = {
+	.clk = {
+		.name = "pclk",
+		.parent = &jz_clk_pll,
+		.ops = &jz_clk_main_ops,
+	},
+	.div_offset = JZ_CLOCK_CTRL_PDIV_OFFSET,
+};
+
+static const struct clk_ops jz_clk_ko_ops = {
+	.enable = jz_clk_ko_enable,
+	.disable = jz_clk_ko_disable,
+	.is_enabled = jz_clk_ko_is_enabled,
+};
+
+static struct clk jz_clk_ko = {
+	.name = "cko",
+	.parent = &jz_clk_memory.clk,
+	.ops = &jz_clk_ko_ops,
+};
+
+static int jz_clk_spi_set_parent(struct clk *clk, struct clk *parent)
+{
+	if (parent == &jz_clk_pll)
+		jz_clk_reg_set_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
+	else if (parent == &jz_clk_ext.clk)
+		jz_clk_reg_clear_bits(JZ_CLOCK_SPI_SRC_PLL, JZ_REG_CLOCK_SPI);
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	return 0;
+}
+
+static int jz_clk_i2s_set_parent(struct clk *clk, struct clk *parent)
+{
+	if (parent == &jz_clk_pll_half)
+		jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
+	else if (parent == &jz_clk_ext.clk)
+		jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_I2S_SRC_PLL);
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	return 0;
+}
+
+static int jz_clk_udc_enable(struct clk *clk)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_SLEEP_CTRL,
+			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
+
+	return 0;
+}
+
+static int jz_clk_udc_disable(struct clk *clk)
+{
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_SLEEP_CTRL,
+			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
+
+	return 0;
+}
+
+static int jz_clk_udc_is_enabled(struct clk *clk)
+{
+	return !!(jz_clk_reg_read(JZ_REG_CLOCK_SLEEP_CTRL) &
+			JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC);
+}
+
+static int jz_clk_udc_set_parent(struct clk *clk, struct clk *parent)
+{
+	if (parent == &jz_clk_pll_half)
+		jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
+	else if (parent == &jz_clk_ext.clk)
+		jz_clk_reg_clear_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_UDC_SRC_PLL);
+	else
+		return -EINVAL;
+
+	clk->parent = parent;
+
+	return 0;
+}
+
+static int jz_clk_udc_set_rate(struct clk *clk, unsigned long rate)
+{
+	int div;
+
+	if (clk->parent == &jz_clk_ext.clk)
+		return -EINVAL;
+
+	div = clk_get_rate(clk->parent) / rate - 1;
+
+	if (div < 0)
+		div = 0;
+	else if (div > 63)
+		div = 63;
+
+	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_UDIV_OFFSET,
+				JZ_CLOCK_CTRL_UDIV_MASK);
+	return 0;
+}
+
+static unsigned long jz_clk_udc_get_rate(struct clk *clk)
+{
+	int div;
+
+	if (clk->parent == &jz_clk_ext.clk)
+		return clk_get_rate(clk->parent);
+
+	div = (jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_UDIV_MASK);
+	div >>= JZ_CLOCK_CTRL_UDIV_OFFSET;
+	div += 1;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static unsigned long jz_clk_divided_get_rate(struct clk *clk)
+{
+	struct divided_clk *dclk = (struct divided_clk *)clk;
+	int div;
+
+	if (clk->parent == &jz_clk_ext.clk)
+		return clk_get_rate(clk->parent);
+
+	div = (jz_clk_reg_read(dclk->reg) & dclk->mask) + 1;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int jz_clk_divided_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct divided_clk *dclk = (struct divided_clk *)clk;
+	int div;
+
+	if (clk->parent == &jz_clk_ext.clk)
+		return -EINVAL;
+
+	div = clk_get_rate(clk->parent) / rate - 1;
+
+	if (div < 0)
+		div = 0;
+	else if (div > dclk->mask)
+		div = dclk->mask;
+
+	jz_clk_reg_write_mask(dclk->reg, div, dclk->mask);
+
+	return 0;
+}
+
+static unsigned long jz_clk_ldclk_round_rate(struct clk *clk, unsigned long rate)
+{
+	int div;
+	unsigned long parent_rate = jz_clk_pll_half_get_rate(clk->parent);
+
+	if (rate > 150000000)
+		return 150000000;
+
+	div = parent_rate / rate;
+	if (div < 1)
+		div = 1;
+	else if (div > 32)
+		div = 32;
+
+	return parent_rate / div;
+}
+
+static int jz_clk_ldclk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int div;
+
+	if (rate > 150000000)
+		return -EINVAL;
+
+	div = jz_clk_pll_half_get_rate(clk->parent) / rate - 1;
+	if (div < 0)
+		div = 0;
+	else if (div > 31)
+		div = 31;
+
+	jz_clk_reg_write_mask(JZ_REG_CLOCK_CTRL, div << JZ_CLOCK_CTRL_LDIV_OFFSET,
+				JZ_CLOCK_CTRL_LDIV_MASK);
+
+	return 0;
+}
+
+static unsigned long jz_clk_ldclk_get_rate(struct clk *clk)
+{
+	int div;
+
+	div = jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_LDIV_MASK;
+	div >>= JZ_CLOCK_CTRL_LDIV_OFFSET;
+
+	return jz_clk_pll_half_get_rate(clk->parent) / (div + 1);
+}
+
+static const struct clk_ops jz_clk_ops_ld = {
+	.set_rate = jz_clk_ldclk_set_rate,
+	.get_rate = jz_clk_ldclk_get_rate,
+	.round_rate = jz_clk_ldclk_round_rate,
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+};
+
+static struct clk jz_clk_ld = {
+	.name = "lcd",
+	.gate_bit = JZ_CLOCK_GATE_LCD,
+	.parent = &jz_clk_pll_half,
+	.ops = &jz_clk_ops_ld,
+};
+
+static const struct clk_ops jz_clk_i2s_ops = {
+	.set_rate = jz_clk_divided_set_rate,
+	.get_rate = jz_clk_divided_get_rate,
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+	.set_parent = jz_clk_i2s_set_parent,
+};
+
+static const struct clk_ops jz_clk_spi_ops = {
+	.set_rate = jz_clk_divided_set_rate,
+	.get_rate = jz_clk_divided_get_rate,
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+	.set_parent = jz_clk_spi_set_parent,
+};
+
+static const struct clk_ops jz_clk_divided_ops = {
+	.set_rate = jz_clk_divided_set_rate,
+	.get_rate = jz_clk_divided_get_rate,
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+};
+
+static struct divided_clk jz4740_clock_divided_clks[] = {
+	[0] = {
+		.clk = {
+			.name = "i2s",
+			.parent = &jz_clk_ext.clk,
+			.gate_bit = JZ_CLOCK_GATE_I2S,
+			.ops = &jz_clk_i2s_ops,
+		},
+		.reg = JZ_REG_CLOCK_I2S,
+		.mask = JZ_CLOCK_I2S_DIV_MASK,
+	},
+	[1] = {
+		.clk = {
+			.name = "spi",
+			.parent = &jz_clk_ext.clk,
+			.gate_bit = JZ_CLOCK_GATE_SPI,
+			.ops = &jz_clk_spi_ops,
+		},
+		.reg = JZ_REG_CLOCK_SPI,
+		.mask = JZ_CLOCK_SPI_DIV_MASK,
+	},
+	[2] = {
+		.clk = {
+			.name = "lcd_pclk",
+			.parent = &jz_clk_pll_half,
+			.gate_bit = JZ4740_CLK_NOT_GATED,
+			.ops = &jz_clk_divided_ops,
+		},
+		.reg = JZ_REG_CLOCK_LCD,
+		.mask = JZ_CLOCK_LCD_DIV_MASK,
+	},
+	[3] = {
+		.clk = {
+			.name = "mmc",
+			.parent = &jz_clk_pll_half,
+			.gate_bit = JZ_CLOCK_GATE_MMC,
+			.ops = &jz_clk_divided_ops,
+		},
+		.reg = JZ_REG_CLOCK_MMC,
+		.mask = JZ_CLOCK_MMC_DIV_MASK,
+	},
+	[4] = {
+		.clk = {
+			.name = "uhc",
+			.parent = &jz_clk_pll_half,
+			.gate_bit = JZ_CLOCK_GATE_UHC,
+			.ops = &jz_clk_divided_ops,
+		},
+		.reg = JZ_REG_CLOCK_UHC,
+		.mask = JZ_CLOCK_UHC_DIV_MASK,
+	},
+};
+
+static const struct clk_ops jz_clk_udc_ops = {
+	.set_parent = jz_clk_udc_set_parent,
+	.set_rate = jz_clk_udc_set_rate,
+	.get_rate = jz_clk_udc_get_rate,
+	.enable = jz_clk_udc_enable,
+	.disable = jz_clk_udc_disable,
+	.is_enabled = jz_clk_udc_is_enabled,
+};
+
+static const struct clk_ops jz_clk_simple_ops = {
+	.enable = jz_clk_enable_gating,
+	.disable = jz_clk_disable_gating,
+	.is_enabled = jz_clk_is_enabled_gating,
+};
+
+static struct clk jz4740_clock_simple_clks[] = {
+	[0] = {
+		.name = "udc",
+		.parent = &jz_clk_ext.clk,
+		.ops = &jz_clk_udc_ops,
+	},
+	[1] = {
+		.name = "uart0",
+		.parent = &jz_clk_ext.clk,
+		.gate_bit = JZ_CLOCK_GATE_UART0,
+		.ops = &jz_clk_simple_ops,
+	},
+	[2] = {
+		.name = "uart1",
+		.parent = &jz_clk_ext.clk,
+		.gate_bit = JZ_CLOCK_GATE_UART1,
+		.ops = &jz_clk_simple_ops,
+	},
+	[3] = {
+		.name = "dma",
+		.parent = &jz_clk_high_speed_peripheral.clk,
+		.gate_bit = JZ_CLOCK_GATE_UART0,
+		.ops = &jz_clk_simple_ops,
+	},
+	[4] = {
+		.name = "ipu",
+		.parent = &jz_clk_high_speed_peripheral.clk,
+		.gate_bit = JZ_CLOCK_GATE_IPU,
+		.ops = &jz_clk_simple_ops,
+	},
+	[5] = {
+		.name = "adc",
+		.parent = &jz_clk_ext.clk,
+		.gate_bit = JZ_CLOCK_GATE_ADC,
+		.ops = &jz_clk_simple_ops,
+	},
+	[6] = {
+		.name = "i2c",
+		.parent = &jz_clk_ext.clk,
+		.gate_bit = JZ_CLOCK_GATE_I2C,
+		.ops = &jz_clk_simple_ops,
+	},
+	[7] = {
+		.name = "aic",
+		.parent = &jz_clk_ext.clk,
+		.gate_bit = JZ_CLOCK_GATE_AIC,
+		.ops = &jz_clk_simple_ops,
+	},
+};
+
+static struct static_clk jz_clk_rtc = {
+	.clk = {
+		.name = "rtc",
+		.gate_bit = JZ_CLOCK_GATE_RTC,
+		.ops = &jz_clk_static_ops,
+	},
+	.rate = 32768,
+};
+
+int clk_enable(struct clk *clk)
+{
+	if (!clk->ops->enable)
+		return -EINVAL;
+
+	return clk->ops->enable(clk);
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	if (clk->ops->disable)
+		clk->ops->disable(clk);
+}
+EXPORT_SYMBOL_GPL(clk_disable);
+
+int clk_is_enabled(struct clk *clk)
+{
+	if (clk->ops->is_enabled)
+		return clk->ops->is_enabled(clk);
+
+	return 1;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->ops->get_rate)
+		return clk->ops->get_rate(clk);
+	if (clk->parent)
+		return clk_get_rate(clk->parent);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(clk_get_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (!clk->ops->set_rate)
+		return -EINVAL;
+	return clk->ops->set_rate(clk, rate);
+}
+EXPORT_SYMBOL_GPL(clk_set_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->ops->round_rate)
+		return clk->ops->round_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(clk_round_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret;
+	int enabled;
+
+	if (!clk->ops->set_parent)
+		return -EINVAL;
+
+	enabled = clk_is_enabled(clk);
+	if (enabled)
+		clk_disable(clk);
+	ret = clk->ops->set_parent(clk, parent);
+	if (enabled)
+		clk_enable(clk);
+
+	jz4740_clock_debugfs_update_parent(clk);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+struct clk *clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	list_for_each_entry(clk, &jz_clocks, list) {
+		if (strcmp(clk->name, name) == 0)
+			return clk;
+	}
+	return ERR_PTR(-ENXIO);
+}
+EXPORT_SYMBOL_GPL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL_GPL(clk_put);
+
+static inline void clk_add(struct clk *clk)
+{
+	list_add_tail(&clk->list, &jz_clocks);
+
+	jz4740_clock_debugfs_add_clk(clk);
+}
+
+static void clk_register_clks(void)
+{
+	size_t i;
+
+	clk_add(&jz_clk_ext.clk);
+	clk_add(&jz_clk_pll);
+	clk_add(&jz_clk_pll_half);
+	clk_add(&jz_clk_cpu.clk);
+	clk_add(&jz_clk_high_speed_peripheral.clk);
+	clk_add(&jz_clk_low_speed_peripheral.clk);
+	clk_add(&jz_clk_ko);
+	clk_add(&jz_clk_ld);
+	clk_add(&jz_clk_rtc.clk);
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_clock_divided_clks); ++i)
+		clk_add(&jz4740_clock_divided_clks[i].clk);
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_clock_simple_clks); ++i)
+		clk_add(&jz4740_clock_simple_clks[i]);
+}
+
+void jz4740_clock_set_wait_mode(enum jz4740_wait_mode mode)
+{
+	switch (mode) {
+	case JZ4740_WAIT_MODE_IDLE:
+		jz_clk_reg_clear_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
+		break;
+	case JZ4740_WAIT_MODE_SLEEP:
+		jz_clk_reg_set_bits(JZ_REG_CLOCK_LOW_POWER, JZ_CLOCK_LOW_POWER_MODE_SLEEP);
+		break;
+	}
+}
+
+void jz4740_clock_udc_disable_auto_suspend(void)
+{
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
+}
+EXPORT_SYMBOL_GPL(jz4740_clock_udc_disable_auto_suspend);
+
+void jz4740_clock_udc_enable_auto_suspend(void)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE, JZ_CLOCK_GATE_UDC);
+}
+EXPORT_SYMBOL_GPL(jz4740_clock_udc_enable_auto_suspend);
+
+void jz4740_clock_suspend(void)
+{
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_GATE,
+		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
+
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
+}
+
+void jz4740_clock_resume(void)
+{
+	uint32_t pll;
+
+	jz_clk_reg_set_bits(JZ_REG_CLOCK_PLL, JZ_CLOCK_PLL_ENABLED);
+
+	do {
+		pll = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
+	} while (!(pll & JZ_CLOCK_PLL_STABLE));
+
+	jz_clk_reg_clear_bits(JZ_REG_CLOCK_GATE,
+		JZ_CLOCK_GATE_TCU | JZ_CLOCK_GATE_DMAC | JZ_CLOCK_GATE_UART0);
+}
+
+static int jz4740_clock_init(void)
+{
+	uint32_t val;
+
+	jz_clock_base = ioremap(JZ4740_CPM_BASE_ADDR, 0x100);
+	if (!jz_clock_base)
+		return -EBUSY;
+
+	spin_lock_init(&jz_clock_lock);
+
+	jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
+	jz_clk_rtc.rate = jz4740_clock_bdata.rtc_rate;
+
+	val = jz_clk_reg_read(JZ_REG_CLOCK_SPI);
+
+	if (val & JZ_CLOCK_SPI_SRC_PLL)
+		jz4740_clock_divided_clks[1].clk.parent = &jz_clk_pll_half;
+
+	val = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
+
+	if (val & JZ_CLOCK_CTRL_I2S_SRC_PLL)
+		jz4740_clock_divided_clks[0].clk.parent = &jz_clk_pll_half;
+
+	if (val & JZ_CLOCK_CTRL_UDC_SRC_PLL)
+		jz4740_clock_simple_clks[0].parent = &jz_clk_pll_half;
+
+	jz4740_clock_debugfs_init();
+
+	clk_register_clks();
+
+	return 0;
+}
+arch_initcall(jz4740_clock_init);
diff --git a/arch/mips/jz4740/clock.h b/arch/mips/jz4740/clock.h
new file mode 100644
index 00000000000..5d07499d746
--- /dev/null
+++ b/arch/mips/jz4740/clock.h
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC clock support
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MIPS_JZ4740_CLOCK_H__
+#define __MIPS_JZ4740_CLOCK_H__
+
+#include <linux/list.h>
+
+struct jz4740_clock_board_data {
+	unsigned long ext_rate;
+	unsigned long rtc_rate;
+};
+
+extern struct jz4740_clock_board_data jz4740_clock_bdata;
+
+void jz4740_clock_suspend(void);
+void jz4740_clock_resume(void);
+
+struct clk;
+
+struct clk_ops {
+	unsigned long (*get_rate)(struct clk *clk);
+	unsigned long (*round_rate)(struct clk *clk, unsigned long rate);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	int (*enable)(struct clk *clk);
+	int (*disable)(struct clk *clk);
+	int (*is_enabled)(struct clk *clk);
+
+	int (*set_parent)(struct clk *clk, struct clk *parent);
+
+};
+
+struct clk {
+	const char *name;
+	struct clk *parent;
+
+	uint32_t gate_bit;
+
+	const struct clk_ops *ops;
+
+	struct list_head list;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_entry;
+	struct dentry *debugfs_parent_entry;
+#endif
+
+};
+
+#define JZ4740_CLK_NOT_GATED ((uint32_t)-1)
+
+int clk_is_enabled(struct clk *clk);
+
+#ifdef CONFIG_DEBUG_FS
+void jz4740_clock_debugfs_init(void);
+void jz4740_clock_debugfs_add_clk(struct clk *clk);
+void jz4740_clock_debugfs_update_parent(struct clk *clk);
+#else
+static inline void jz4740_clock_debugfs_init(void) {};
+static inline void jz4740_clock_debugfs_add_clk(struct clk *clk) {};
+static inline void jz4740_clock_debugfs_update_parent(struct clk *clk) {};
+#endif
+
+#endif
diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c
new file mode 100644
index 00000000000..5ebe75a6835
--- /dev/null
+++ b/arch/mips/jz4740/dma.c
@@ -0,0 +1,289 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC DMA support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+
+#include <linux/dma-mapping.h>
+#include <asm/mach-jz4740/dma.h>
+#include <asm/mach-jz4740/base.h>
+
+#define JZ_REG_DMA_SRC_ADDR(x)		(0x00 + (x) * 0x20)
+#define JZ_REG_DMA_DST_ADDR(x)		(0x04 + (x) * 0x20)
+#define JZ_REG_DMA_TRANSFER_COUNT(x)	(0x08 + (x) * 0x20)
+#define JZ_REG_DMA_REQ_TYPE(x)		(0x0C + (x) * 0x20)
+#define JZ_REG_DMA_STATUS_CTRL(x)	(0x10 + (x) * 0x20)
+#define JZ_REG_DMA_CMD(x)		(0x14 + (x) * 0x20)
+#define JZ_REG_DMA_DESC_ADDR(x)		(0x18 + (x) * 0x20)
+
+#define JZ_REG_DMA_CTRL			0x300
+#define JZ_REG_DMA_IRQ			0x304
+#define JZ_REG_DMA_DOORBELL		0x308
+#define JZ_REG_DMA_DOORBELL_SET		0x30C
+
+#define JZ_DMA_STATUS_CTRL_NO_DESC		BIT(31)
+#define JZ_DMA_STATUS_CTRL_DESC_INV		BIT(6)
+#define JZ_DMA_STATUS_CTRL_ADDR_ERR		BIT(4)
+#define JZ_DMA_STATUS_CTRL_TRANSFER_DONE	BIT(3)
+#define JZ_DMA_STATUS_CTRL_HALT			BIT(2)
+#define JZ_DMA_STATUS_CTRL_COUNT_TERMINATE	BIT(1)
+#define JZ_DMA_STATUS_CTRL_ENABLE		BIT(0)
+
+#define JZ_DMA_CMD_SRC_INC			BIT(23)
+#define JZ_DMA_CMD_DST_INC			BIT(22)
+#define JZ_DMA_CMD_RDIL_MASK			(0xf << 16)
+#define JZ_DMA_CMD_SRC_WIDTH_MASK		(0x3 << 14)
+#define JZ_DMA_CMD_DST_WIDTH_MASK		(0x3 << 12)
+#define JZ_DMA_CMD_INTERVAL_LENGTH_MASK		(0x7 << 8)
+#define JZ_DMA_CMD_BLOCK_MODE			BIT(7)
+#define JZ_DMA_CMD_DESC_VALID			BIT(4)
+#define JZ_DMA_CMD_DESC_VALID_MODE		BIT(3)
+#define JZ_DMA_CMD_VALID_IRQ_ENABLE		BIT(2)
+#define JZ_DMA_CMD_TRANSFER_IRQ_ENABLE		BIT(1)
+#define JZ_DMA_CMD_LINK_ENABLE			BIT(0)
+
+#define JZ_DMA_CMD_FLAGS_OFFSET 22
+#define JZ_DMA_CMD_RDIL_OFFSET 16
+#define JZ_DMA_CMD_SRC_WIDTH_OFFSET 14
+#define JZ_DMA_CMD_DST_WIDTH_OFFSET 12
+#define JZ_DMA_CMD_TRANSFER_SIZE_OFFSET 8
+#define JZ_DMA_CMD_MODE_OFFSET 7
+
+#define JZ_DMA_CTRL_PRIORITY_MASK	(0x3 << 8)
+#define JZ_DMA_CTRL_HALT		BIT(3)
+#define JZ_DMA_CTRL_ADDRESS_ERROR	BIT(2)
+#define JZ_DMA_CTRL_ENABLE		BIT(0)
+
+
+static void __iomem *jz4740_dma_base;
+static spinlock_t jz4740_dma_lock;
+
+static inline uint32_t jz4740_dma_read(size_t reg)
+{
+	return readl(jz4740_dma_base + reg);
+}
+
+static inline void jz4740_dma_write(size_t reg, uint32_t val)
+{
+	writel(val, jz4740_dma_base + reg);
+}
+
+static inline void jz4740_dma_write_mask(size_t reg, uint32_t val, uint32_t mask)
+{
+	uint32_t val2;
+	val2 = jz4740_dma_read(reg);
+	val2 &= ~mask;
+	val2 |= val;
+	jz4740_dma_write(reg, val2);
+}
+
+struct jz4740_dma_chan {
+	unsigned int id;
+	void *dev;
+	const char *name;
+
+	enum jz4740_dma_flags flags;
+	uint32_t transfer_shift;
+
+	jz4740_dma_complete_callback_t complete_cb;
+
+	unsigned used:1;
+};
+
+#define JZ4740_DMA_CHANNEL(_id) { .id = _id }
+
+struct jz4740_dma_chan jz4740_dma_channels[] = {
+	JZ4740_DMA_CHANNEL(0),
+	JZ4740_DMA_CHANNEL(1),
+	JZ4740_DMA_CHANNEL(2),
+	JZ4740_DMA_CHANNEL(3),
+	JZ4740_DMA_CHANNEL(4),
+	JZ4740_DMA_CHANNEL(5),
+};
+
+struct jz4740_dma_chan *jz4740_dma_request(void *dev, const char *name)
+{
+	unsigned int i;
+	struct jz4740_dma_chan *dma = NULL;
+
+	spin_lock(&jz4740_dma_lock);
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_dma_channels); ++i) {
+		if (!jz4740_dma_channels[i].used) {
+			dma = &jz4740_dma_channels[i];
+			dma->used = 1;
+			break;
+		}
+	}
+
+	spin_unlock(&jz4740_dma_lock);
+
+	if (!dma)
+		return NULL;
+
+	dma->dev = dev;
+	dma->name = name;
+
+	return dma;
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_request);
+
+void jz4740_dma_configure(struct jz4740_dma_chan *dma,
+	const struct jz4740_dma_config *config)
+{
+	uint32_t cmd;
+
+	switch (config->transfer_size) {
+	case JZ4740_DMA_TRANSFER_SIZE_2BYTE:
+		dma->transfer_shift = 1;
+		break;
+	case JZ4740_DMA_TRANSFER_SIZE_4BYTE:
+		dma->transfer_shift = 2;
+		break;
+	case JZ4740_DMA_TRANSFER_SIZE_16BYTE:
+		dma->transfer_shift = 4;
+		break;
+	case JZ4740_DMA_TRANSFER_SIZE_32BYTE:
+		dma->transfer_shift = 5;
+		break;
+	default:
+		dma->transfer_shift = 0;
+		break;
+	}
+
+	cmd = config->flags << JZ_DMA_CMD_FLAGS_OFFSET;
+	cmd |= config->src_width << JZ_DMA_CMD_SRC_WIDTH_OFFSET;
+	cmd |= config->dst_width << JZ_DMA_CMD_DST_WIDTH_OFFSET;
+	cmd |= config->transfer_size << JZ_DMA_CMD_TRANSFER_SIZE_OFFSET;
+	cmd |= config->mode << JZ_DMA_CMD_MODE_OFFSET;
+	cmd |= JZ_DMA_CMD_TRANSFER_IRQ_ENABLE;
+
+	jz4740_dma_write(JZ_REG_DMA_CMD(dma->id), cmd);
+	jz4740_dma_write(JZ_REG_DMA_STATUS_CTRL(dma->id), 0);
+	jz4740_dma_write(JZ_REG_DMA_REQ_TYPE(dma->id), config->request_type);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_configure);
+
+void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src)
+{
+	jz4740_dma_write(JZ_REG_DMA_SRC_ADDR(dma->id), src);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_set_src_addr);
+
+void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst)
+{
+	jz4740_dma_write(JZ_REG_DMA_DST_ADDR(dma->id), dst);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_set_dst_addr);
+
+void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count)
+{
+	count >>= dma->transfer_shift;
+	jz4740_dma_write(JZ_REG_DMA_TRANSFER_COUNT(dma->id), count);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_set_transfer_count);
+
+void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma,
+	jz4740_dma_complete_callback_t cb)
+{
+	dma->complete_cb = cb;
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_set_complete_cb);
+
+void jz4740_dma_free(struct jz4740_dma_chan *dma)
+{
+	dma->dev = NULL;
+	dma->complete_cb = NULL;
+	dma->used = 0;
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_free);
+
+void jz4740_dma_enable(struct jz4740_dma_chan *dma)
+{
+	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id),
+			JZ_DMA_STATUS_CTRL_NO_DESC | JZ_DMA_STATUS_CTRL_ENABLE,
+			JZ_DMA_STATUS_CTRL_HALT | JZ_DMA_STATUS_CTRL_NO_DESC |
+			JZ_DMA_STATUS_CTRL_ENABLE);
+
+	jz4740_dma_write_mask(JZ_REG_DMA_CTRL,
+			JZ_DMA_CTRL_ENABLE,
+			JZ_DMA_CTRL_HALT | JZ_DMA_CTRL_ENABLE);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_enable);
+
+void jz4740_dma_disable(struct jz4740_dma_chan *dma)
+{
+	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
+			JZ_DMA_STATUS_CTRL_ENABLE);
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_disable);
+
+uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma)
+{
+	uint32_t residue;
+	residue = jz4740_dma_read(JZ_REG_DMA_TRANSFER_COUNT(dma->id));
+	return residue << dma->transfer_shift;
+}
+EXPORT_SYMBOL_GPL(jz4740_dma_get_residue);
+
+static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma)
+{
+	uint32_t status;
+
+	status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id));
+
+	jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0,
+		JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE);
+
+	if (dma->complete_cb)
+		dma->complete_cb(dma, 0, dma->dev);
+}
+
+static irqreturn_t jz4740_dma_irq(int irq, void *dev_id)
+{
+	uint32_t irq_status;
+	unsigned int i;
+
+	irq_status = readl(jz4740_dma_base + JZ_REG_DMA_IRQ);
+
+	for (i = 0; i < 6; ++i) {
+		if (irq_status & (1 << i))
+			jz4740_dma_chan_irq(&jz4740_dma_channels[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int jz4740_dma_init(void)
+{
+	unsigned int ret;
+
+	jz4740_dma_base = ioremap(JZ4740_DMAC_BASE_ADDR, 0x400);
+
+	if (!jz4740_dma_base)
+		return -EBUSY;
+
+	spin_lock_init(&jz4740_dma_lock);
+
+	ret = request_irq(JZ4740_IRQ_DMAC, jz4740_dma_irq, 0, "DMA", NULL);
+
+	if (ret)
+		printk(KERN_ERR "JZ4740 DMA: Failed to request irq: %d\n", ret);
+
+	return ret;
+}
+arch_initcall(jz4740_dma_init);
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
new file mode 100644
index 00000000000..38f60f35156
--- /dev/null
+++ b/arch/mips/jz4740/gpio.c
@@ -0,0 +1,604 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform GPIO support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/mach-jz4740/base.h>
+
+#define JZ4740_GPIO_BASE_A (32*0)
+#define JZ4740_GPIO_BASE_B (32*1)
+#define JZ4740_GPIO_BASE_C (32*2)
+#define JZ4740_GPIO_BASE_D (32*3)
+
+#define JZ4740_GPIO_NUM_A 32
+#define JZ4740_GPIO_NUM_B 32
+#define JZ4740_GPIO_NUM_C 31
+#define JZ4740_GPIO_NUM_D 32
+
+#define JZ4740_IRQ_GPIO_BASE_A (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_A)
+#define JZ4740_IRQ_GPIO_BASE_B (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_B)
+#define JZ4740_IRQ_GPIO_BASE_C (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_C)
+#define JZ4740_IRQ_GPIO_BASE_D (JZ4740_IRQ_GPIO(0) + JZ4740_GPIO_BASE_D)
+
+#define JZ_REG_GPIO_PIN			0x00
+#define JZ_REG_GPIO_DATA		0x10
+#define JZ_REG_GPIO_DATA_SET		0x14
+#define JZ_REG_GPIO_DATA_CLEAR		0x18
+#define JZ_REG_GPIO_MASK		0x20
+#define JZ_REG_GPIO_MASK_SET		0x24
+#define JZ_REG_GPIO_MASK_CLEAR		0x28
+#define JZ_REG_GPIO_PULL		0x30
+#define JZ_REG_GPIO_PULL_SET		0x34
+#define JZ_REG_GPIO_PULL_CLEAR		0x38
+#define JZ_REG_GPIO_FUNC		0x40
+#define JZ_REG_GPIO_FUNC_SET		0x44
+#define JZ_REG_GPIO_FUNC_CLEAR		0x48
+#define JZ_REG_GPIO_SELECT		0x50
+#define JZ_REG_GPIO_SELECT_SET		0x54
+#define JZ_REG_GPIO_SELECT_CLEAR	0x58
+#define JZ_REG_GPIO_DIRECTION		0x60
+#define JZ_REG_GPIO_DIRECTION_SET	0x64
+#define JZ_REG_GPIO_DIRECTION_CLEAR	0x68
+#define JZ_REG_GPIO_TRIGGER		0x70
+#define JZ_REG_GPIO_TRIGGER_SET		0x74
+#define JZ_REG_GPIO_TRIGGER_CLEAR	0x78
+#define JZ_REG_GPIO_FLAG		0x80
+#define JZ_REG_GPIO_FLAG_CLEAR		0x14
+
+#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f)
+#define GPIO_TO_REG(gpio, reg) (gpio_to_jz_gpio_chip(gpio)->base + (reg))
+#define CHIP_TO_REG(chip, reg) (gpio_chip_to_jz_gpio_chip(chip)->base + (reg))
+
+struct jz_gpio_chip {
+	unsigned int irq;
+	unsigned int irq_base;
+	uint32_t wakeup;
+	uint32_t suspend_mask;
+	uint32_t edge_trigger_both;
+
+	void __iomem *base;
+
+	spinlock_t lock;
+
+	struct gpio_chip gpio_chip;
+	struct irq_chip irq_chip;
+	struct sys_device sysdev;
+};
+
+static struct jz_gpio_chip jz4740_gpio_chips[];
+
+static inline struct jz_gpio_chip *gpio_to_jz_gpio_chip(unsigned int gpio)
+{
+	return &jz4740_gpio_chips[gpio >> 5];
+}
+
+static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gpio_chip)
+{
+	return container_of(gpio_chip, struct jz_gpio_chip, gpio_chip);
+}
+
+static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(unsigned int irq)
+{
+	return get_irq_chip_data(irq);
+}
+
+static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
+{
+	writel(GPIO_TO_BIT(gpio), GPIO_TO_REG(gpio, reg));
+}
+
+int jz_gpio_set_function(int gpio, enum jz_gpio_function function)
+{
+	if (function == JZ_GPIO_FUNC_NONE) {
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_CLEAR);
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
+	} else {
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_FUNC_SET);
+		jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_CLEAR);
+		switch (function) {
+		case JZ_GPIO_FUNC1:
+			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_CLEAR);
+			break;
+		case JZ_GPIO_FUNC3:
+			jz_gpio_write_bit(gpio, JZ_REG_GPIO_TRIGGER_SET);
+		case JZ_GPIO_FUNC2: /* Falltrough */
+			jz_gpio_write_bit(gpio, JZ_REG_GPIO_SELECT_SET);
+			break;
+		default:
+			BUG();
+			break;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(jz_gpio_set_function);
+
+int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num)
+{
+	size_t i;
+	int ret;
+
+	for (i = 0; i < num; ++i, ++request) {
+		ret = gpio_request(request->gpio, request->name);
+		if (ret)
+			goto err;
+		jz_gpio_set_function(request->gpio, request->function);
+	}
+
+	return 0;
+
+err:
+	for (--request; i > 0; --i, --request) {
+		gpio_free(request->gpio);
+		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(jz_gpio_bulk_request);
+
+void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num)
+{
+	size_t i;
+
+	for (i = 0; i < num; ++i, ++request) {
+		gpio_free(request->gpio);
+		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
+	}
+
+}
+EXPORT_SYMBOL_GPL(jz_gpio_bulk_free);
+
+void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num)
+{
+	size_t i;
+
+	for (i = 0; i < num; ++i, ++request) {
+		jz_gpio_set_function(request->gpio, JZ_GPIO_FUNC_NONE);
+		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_DIRECTION_CLEAR);
+		jz_gpio_write_bit(request->gpio, JZ_REG_GPIO_PULL_SET);
+	}
+}
+EXPORT_SYMBOL_GPL(jz_gpio_bulk_suspend);
+
+void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num)
+{
+	size_t i;
+
+	for (i = 0; i < num; ++i, ++request)
+		jz_gpio_set_function(request->gpio, request->function);
+}
+EXPORT_SYMBOL_GPL(jz_gpio_bulk_resume);
+
+void jz_gpio_enable_pullup(unsigned gpio)
+{
+	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_CLEAR);
+}
+EXPORT_SYMBOL_GPL(jz_gpio_enable_pullup);
+
+void jz_gpio_disable_pullup(unsigned gpio)
+{
+	jz_gpio_write_bit(gpio, JZ_REG_GPIO_PULL_SET);
+}
+EXPORT_SYMBOL_GPL(jz_gpio_disable_pullup);
+
+static int jz_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(readl(CHIP_TO_REG(chip, JZ_REG_GPIO_PIN)) & BIT(gpio));
+}
+
+static void jz_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+	uint32_t __iomem *reg = CHIP_TO_REG(chip, JZ_REG_GPIO_DATA_SET);
+	reg += !value;
+	writel(BIT(gpio), reg);
+}
+
+static int jz_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
+	int value)
+{
+	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_SET));
+	jz_gpio_set_value(chip, gpio, value);
+
+	return 0;
+}
+
+static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	writel(BIT(gpio), CHIP_TO_REG(chip, JZ_REG_GPIO_DIRECTION_CLEAR));
+
+	return 0;
+}
+
+int jz_gpio_port_direction_input(int port, uint32_t mask)
+{
+	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR));
+
+	return 0;
+}
+EXPORT_SYMBOL(jz_gpio_port_direction_input);
+
+int jz_gpio_port_direction_output(int port, uint32_t mask)
+{
+	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_SET));
+
+	return 0;
+}
+EXPORT_SYMBOL(jz_gpio_port_direction_output);
+
+void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask)
+{
+	writel(~value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_CLEAR));
+	writel(value & mask, GPIO_TO_REG(port, JZ_REG_GPIO_DATA_SET));
+}
+EXPORT_SYMBOL(jz_gpio_port_set_value);
+
+uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
+{
+	uint32_t value = readl(GPIO_TO_REG(port, JZ_REG_GPIO_PIN));
+
+	return value & mask;
+}
+EXPORT_SYMBOL(jz_gpio_port_get_value);
+
+int gpio_to_irq(unsigned gpio)
+{
+	return JZ4740_IRQ_GPIO(0) + gpio;
+}
+EXPORT_SYMBOL_GPL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+	return irq - JZ4740_IRQ_GPIO(0);
+}
+EXPORT_SYMBOL_GPL(irq_to_gpio);
+
+#define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
+
+static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
+{
+	uint32_t value;
+	void __iomem *reg;
+	uint32_t mask = IRQ_TO_BIT(irq);
+
+	if (!(chip->edge_trigger_both & mask))
+		return;
+
+	reg = chip->base;
+
+	value = readl(chip->base + JZ_REG_GPIO_PIN);
+	if (value & mask)
+		reg += JZ_REG_GPIO_DIRECTION_CLEAR;
+	else
+		reg += JZ_REG_GPIO_DIRECTION_SET;
+
+	writel(mask, reg);
+}
+
+static void jz_gpio_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	uint32_t flag;
+	unsigned int gpio_irq;
+	unsigned int gpio_bank;
+	struct jz_gpio_chip *chip = get_irq_desc_data(desc);
+
+	gpio_bank = JZ4740_IRQ_GPIO0 - irq;
+
+	flag = readl(chip->base + JZ_REG_GPIO_FLAG);
+
+	if (!flag)
+		return;
+
+	gpio_irq = __fls(flag);
+
+	jz_gpio_check_trigger_both(chip, irq);
+
+	gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0);
+
+	generic_handle_irq(gpio_irq);
+};
+
+static inline void jz_gpio_set_irq_bit(unsigned int irq, unsigned int reg)
+{
+	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq);
+	writel(IRQ_TO_BIT(irq), chip->base + reg);
+}
+
+static void jz_gpio_irq_mask(unsigned int irq)
+{
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_SET);
+};
+
+static void jz_gpio_irq_unmask(unsigned int irq)
+{
+	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq);
+
+	jz_gpio_check_trigger_both(chip, irq);
+
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_MASK_CLEAR);
+};
+
+/* TODO: Check if function is gpio */
+static unsigned int jz_gpio_irq_startup(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_SET);
+
+	desc->status &= ~IRQ_MASKED;
+	jz_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static void jz_gpio_irq_shutdown(unsigned int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	jz_gpio_irq_mask(irq);
+	desc->status |= IRQ_MASKED;
+
+	/* Set direction to input */
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_SELECT_CLEAR);
+}
+
+static void jz_gpio_irq_ack(unsigned int irq)
+{
+	jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_FLAG_CLEAR);
+};
+
+static int jz_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq);
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	jz_gpio_irq_mask(irq);
+
+	if (flow_type == IRQ_TYPE_EDGE_BOTH) {
+		uint32_t value = readl(chip->base + JZ_REG_GPIO_PIN);
+		if (value & IRQ_TO_BIT(irq))
+			flow_type = IRQ_TYPE_EDGE_FALLING;
+		else
+			flow_type = IRQ_TYPE_EDGE_RISING;
+		chip->edge_trigger_both |= IRQ_TO_BIT(irq);
+	} else {
+		chip->edge_trigger_both &= ~IRQ_TO_BIT(irq);
+	}
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET);
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_SET);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_SET);
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_DIRECTION_CLEAR);
+		jz_gpio_set_irq_bit(irq, JZ_REG_GPIO_TRIGGER_CLEAR);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!(desc->status & IRQ_MASKED))
+		jz_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static int jz_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(irq);
+	spin_lock(&chip->lock);
+	if (on)
+		chip->wakeup |= IRQ_TO_BIT(irq);
+	else
+		chip->wakeup &= ~IRQ_TO_BIT(irq);
+	spin_unlock(&chip->lock);
+
+	set_irq_wake(chip->irq, on);
+	return 0;
+}
+
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
+#define JZ4740_GPIO_CHIP(_bank) { \
+	.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
+	.gpio_chip = { \
+		.label = "Bank " # _bank, \
+		.owner = THIS_MODULE, \
+		.set = jz_gpio_set_value, \
+		.get = jz_gpio_get_value, \
+		.direction_output = jz_gpio_direction_output, \
+		.direction_input = jz_gpio_direction_input, \
+		.base = JZ4740_GPIO_BASE_ ## _bank, \
+		.ngpio = JZ4740_GPIO_NUM_ ## _bank, \
+	}, \
+	.irq_chip =  { \
+		.name = "GPIO Bank " # _bank, \
+		.mask = jz_gpio_irq_mask, \
+		.unmask = jz_gpio_irq_unmask, \
+		.ack = jz_gpio_irq_ack, \
+		.startup = jz_gpio_irq_startup, \
+		.shutdown = jz_gpio_irq_shutdown, \
+		.set_type = jz_gpio_irq_set_type, \
+		.set_wake = jz_gpio_irq_set_wake, \
+	}, \
+}
+
+static struct jz_gpio_chip jz4740_gpio_chips[] = {
+	JZ4740_GPIO_CHIP(A),
+	JZ4740_GPIO_CHIP(B),
+	JZ4740_GPIO_CHIP(C),
+	JZ4740_GPIO_CHIP(D),
+};
+
+static inline struct jz_gpio_chip *sysdev_to_chip(struct sys_device *dev)
+{
+	return container_of(dev, struct jz_gpio_chip, sysdev);
+}
+
+static int jz4740_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct jz_gpio_chip *chip = sysdev_to_chip(dev);
+
+	chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
+	writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
+	writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
+
+	return 0;
+}
+
+static int jz4740_gpio_resume(struct sys_device *dev)
+{
+	struct jz_gpio_chip *chip = sysdev_to_chip(dev);
+	uint32_t mask = chip->suspend_mask;
+
+	writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
+	writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
+
+	return 0;
+}
+
+static struct sysdev_class jz4740_gpio_sysdev_class = {
+	.name = "gpio",
+	.suspend = jz4740_gpio_suspend,
+	.resume = jz4740_gpio_resume,
+};
+
+static int jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
+{
+	int ret, irq;
+
+	chip->sysdev.id = id;
+	chip->sysdev.cls = &jz4740_gpio_sysdev_class;
+	ret = sysdev_register(&chip->sysdev);
+
+	if (ret)
+		return ret;
+
+	spin_lock_init(&chip->lock);
+
+	chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
+
+	gpiochip_add(&chip->gpio_chip);
+
+	chip->irq = JZ4740_IRQ_INTC_GPIO(id);
+	set_irq_data(chip->irq, chip);
+	set_irq_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
+
+	for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
+		lockdep_set_class(&irq_desc[irq].lock, &gpio_lock_class);
+		set_irq_chip_data(irq, chip);
+		set_irq_chip_and_handler(irq, &chip->irq_chip, handle_level_irq);
+	}
+
+	return 0;
+}
+
+static int __init jz4740_gpio_init(void)
+{
+	unsigned int i;
+	int ret;
+
+	ret = sysdev_class_register(&jz4740_gpio_sysdev_class);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
+		jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
+
+	printk(KERN_INFO "JZ4740 GPIO initalized\n");
+
+	return 0;
+}
+arch_initcall(jz4740_gpio_init);
+
+#ifdef CONFIG_DEBUG_FS
+
+static inline void gpio_seq_reg(struct seq_file *s, struct jz_gpio_chip *chip,
+	const char *name, unsigned int reg)
+{
+	seq_printf(s, "\t%s: %08x\n", name, readl(chip->base + reg));
+}
+
+static int gpio_regs_show(struct seq_file *s, void *unused)
+{
+	struct jz_gpio_chip *chip = jz4740_gpio_chips;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i, ++chip) {
+		seq_printf(s, "==GPIO %d==\n", i);
+		gpio_seq_reg(s, chip, "Pin", JZ_REG_GPIO_PIN);
+		gpio_seq_reg(s, chip, "Data", JZ_REG_GPIO_DATA);
+		gpio_seq_reg(s, chip, "Mask", JZ_REG_GPIO_MASK);
+		gpio_seq_reg(s, chip, "Pull", JZ_REG_GPIO_PULL);
+		gpio_seq_reg(s, chip, "Func", JZ_REG_GPIO_FUNC);
+		gpio_seq_reg(s, chip, "Select", JZ_REG_GPIO_SELECT);
+		gpio_seq_reg(s, chip, "Direction", JZ_REG_GPIO_DIRECTION);
+		gpio_seq_reg(s, chip, "Trigger", JZ_REG_GPIO_TRIGGER);
+		gpio_seq_reg(s, chip, "Flag", JZ_REG_GPIO_FLAG);
+	}
+
+	return 0;
+}
+
+static int gpio_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, gpio_regs_show, NULL);
+}
+
+static const struct file_operations gpio_regs_operations = {
+	.open		= gpio_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init gpio_debugfs_init(void)
+{
+	(void) debugfs_create_file("jz_regs_gpio", S_IFREG | S_IRUGO,
+				NULL, NULL, &gpio_regs_operations);
+	return 0;
+}
+subsys_initcall(gpio_debugfs_init);
+
+#endif
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
new file mode 100644
index 00000000000..7d33ff83580
--- /dev/null
+++ b/arch/mips/jz4740/irq.c
@@ -0,0 +1,167 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform IRQ support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/irq_cpu.h>
+
+#include <asm/mach-jz4740/base.h>
+
+static void __iomem *jz_intc_base;
+static uint32_t jz_intc_wakeup;
+static uint32_t jz_intc_saved;
+
+#define JZ_REG_INTC_STATUS	0x00
+#define JZ_REG_INTC_MASK	0x04
+#define JZ_REG_INTC_SET_MASK	0x08
+#define JZ_REG_INTC_CLEAR_MASK	0x0c
+#define JZ_REG_INTC_PENDING	0x10
+
+#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE)
+
+static void intc_irq_unmask(unsigned int irq)
+{
+	writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
+}
+
+static void intc_irq_mask(unsigned int irq)
+{
+	writel(IRQ_BIT(irq), jz_intc_base + JZ_REG_INTC_SET_MASK);
+}
+
+static int intc_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	if (on)
+		jz_intc_wakeup |= IRQ_BIT(irq);
+	else
+		jz_intc_wakeup &= ~IRQ_BIT(irq);
+
+	return 0;
+}
+
+static struct irq_chip intc_irq_type = {
+	.name =		"INTC",
+	.mask =		intc_irq_mask,
+	.mask_ack =	intc_irq_mask,
+	.unmask =	intc_irq_unmask,
+	.set_wake =	intc_irq_set_wake,
+};
+
+static irqreturn_t jz4740_cascade(int irq, void *data)
+{
+	uint32_t irq_reg;
+
+	irq_reg = readl(jz_intc_base + JZ_REG_INTC_PENDING);
+
+	if (irq_reg)
+		generic_handle_irq(__fls(irq_reg) + JZ4740_IRQ_BASE);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction jz4740_cascade_action = {
+	.handler = jz4740_cascade,
+	.name = "JZ4740 cascade interrupt",
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+	mips_cpu_irq_init();
+
+	jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
+
+	for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) {
+		intc_irq_mask(i);
+		set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq);
+	}
+
+	setup_irq(2, &jz4740_cascade_action);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	if (pending & STATUSF_IP2)
+		do_IRQ(2);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(3);
+	else
+		spurious_interrupt();
+}
+
+void jz4740_intc_suspend(void)
+{
+	jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
+	writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
+	writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
+}
+
+void jz4740_intc_resume(void)
+{
+	writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
+	writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static inline void intc_seq_reg(struct seq_file *s, const char *name,
+	unsigned int reg)
+{
+	seq_printf(s, "%s:\t\t%08x\n", name, readl(jz_intc_base + reg));
+}
+
+static int intc_regs_show(struct seq_file *s, void *unused)
+{
+	intc_seq_reg(s, "Status", JZ_REG_INTC_STATUS);
+	intc_seq_reg(s, "Mask", JZ_REG_INTC_MASK);
+	intc_seq_reg(s, "Pending", JZ_REG_INTC_PENDING);
+
+	return 0;
+}
+
+static int intc_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, intc_regs_show, NULL);
+}
+
+static const struct file_operations intc_regs_operations = {
+	.open		= intc_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init intc_debugfs_init(void)
+{
+	(void) debugfs_create_file("jz_regs_intc", S_IFREG | S_IRUGO,
+				NULL, NULL, &intc_regs_operations);
+	return 0;
+}
+subsys_initcall(intc_debugfs_init);
+
+#endif
diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h
new file mode 100644
index 00000000000..56b5eadd1fa
--- /dev/null
+++ b/arch/mips/jz4740/irq.h
@@ -0,0 +1,21 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MIPS_JZ4740_IRQ_H__
+#define __MIPS_JZ4740_IRQ_H__
+
+extern void jz4740_intc_suspend(void);
+extern void jz4740_intc_resume(void);
+
+#endif
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
new file mode 100644
index 00000000000..95bc2b5b14f
--- /dev/null
+++ b/arch/mips/jz4740/platform.c
@@ -0,0 +1,291 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform devices
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-jz4740/platform.h>
+#include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include "serial.h"
+#include "clock.h"
+
+/* OHCI controller */
+static struct resource jz4740_usb_ohci_resources[] = {
+	{
+		.start	= JZ4740_UHC_BASE_ADDR,
+		.end	= JZ4740_UHC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_UHC,
+		.end	= JZ4740_IRQ_UHC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_usb_ohci_device = {
+	.name		= "jz4740-ohci",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &jz4740_usb_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(jz4740_usb_ohci_resources),
+	.resource	= jz4740_usb_ohci_resources,
+};
+
+/* UDC (USB gadget controller) */
+static struct resource jz4740_usb_gdt_resources[] = {
+	{
+		.start	= JZ4740_UDC_BASE_ADDR,
+		.end	= JZ4740_UDC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_UDC,
+		.end	= JZ4740_IRQ_UDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_udc_device = {
+	.name		= "jz-udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask = &jz4740_udc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(jz4740_usb_gdt_resources),
+	.resource	= jz4740_usb_gdt_resources,
+};
+
+/* MMC/SD controller */
+static struct resource jz4740_mmc_resources[] = {
+	{
+		.start	= JZ4740_MSC_BASE_ADDR,
+		.end	= JZ4740_MSC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_MSC,
+		.end	= JZ4740_IRQ_MSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device jz4740_mmc_device = {
+	.name		= "jz4740-mmc",
+	.id		= 0,
+	.dev = {
+		.dma_mask = &jz4740_mmc_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources  = ARRAY_SIZE(jz4740_mmc_resources),
+	.resource	= jz4740_mmc_resources,
+};
+
+/* RTC controller */
+static struct resource jz4740_rtc_resources[] = {
+	{
+		.start	= JZ4740_RTC_BASE_ADDR,
+		.end	= JZ4740_RTC_BASE_ADDR + 0x38 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start  = JZ4740_IRQ_RTC,
+		.end	= JZ4740_IRQ_RTC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_rtc_device = {
+	.name		= "jz4740-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_rtc_resources),
+	.resource	= jz4740_rtc_resources,
+};
+
+/* I2C controller */
+static struct resource jz4740_i2c_resources[] = {
+	{
+		.start	= JZ4740_I2C_BASE_ADDR,
+		.end	= JZ4740_I2C_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_I2C,
+		.end	= JZ4740_IRQ_I2C,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device jz4740_i2c_device = {
+	.name		= "jz4740-i2c",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(jz4740_i2c_resources),
+	.resource	= jz4740_i2c_resources,
+};
+
+/* NAND controller */
+static struct resource jz4740_nand_resources[] = {
+	{
+		.name	= "mmio",
+		.start	= JZ4740_EMC_BASE_ADDR,
+		.end	= JZ4740_EMC_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "bank",
+		.start	= 0x18000000,
+		.end	= 0x180C0000 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_nand_device = {
+	.name = "jz4740-nand",
+	.num_resources = ARRAY_SIZE(jz4740_nand_resources),
+	.resource = jz4740_nand_resources,
+};
+
+/* LCD controller */
+static struct resource jz4740_framebuffer_resources[] = {
+	{
+		.start	= JZ4740_LCD_BASE_ADDR,
+		.end	= JZ4740_LCD_BASE_ADDR + 0x1000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_framebuffer_device = {
+	.name		= "jz4740-fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_framebuffer_resources),
+	.resource	= jz4740_framebuffer_resources,
+	.dev = {
+		.dma_mask = &jz4740_framebuffer_device.dev.coherent_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/* I2S controller */
+static struct resource jz4740_i2s_resources[] = {
+	{
+		.start	= JZ4740_AIC_BASE_ADDR,
+		.end	= JZ4740_AIC_BASE_ADDR + 0x38 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_i2s_device = {
+	.name		= "jz4740-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_i2s_resources),
+	.resource	= jz4740_i2s_resources,
+};
+
+/* PCM */
+struct platform_device jz4740_pcm_device = {
+	.name		= "jz4740-pcm",
+	.id		= -1,
+};
+
+/* Codec */
+static struct resource jz4740_codec_resources[] = {
+	{
+		.start	= JZ4740_AIC_BASE_ADDR + 0x80,
+		.end	= JZ4740_AIC_BASE_ADDR + 0x88 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device jz4740_codec_device = {
+	.name		= "jz4740-codec",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_codec_resources),
+	.resource	= jz4740_codec_resources,
+};
+
+/* ADC controller */
+static struct resource jz4740_adc_resources[] = {
+	{
+		.start	= JZ4740_SADC_BASE_ADDR,
+		.end	= JZ4740_SADC_BASE_ADDR + 0x30,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= JZ4740_IRQ_SADC,
+		.end	= JZ4740_IRQ_SADC,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= JZ4740_IRQ_ADC_BASE,
+		.end	= JZ4740_IRQ_ADC_BASE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device jz4740_adc_device = {
+	.name		= "jz4740-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jz4740_adc_resources),
+	.resource	= jz4740_adc_resources,
+};
+
+/* Serial */
+#define JZ4740_UART_DATA(_id) \
+	{ \
+		.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
+		.iotype = UPIO_MEM, \
+		.regshift = 2, \
+		.serial_out = jz4740_serial_out, \
+		.type = PORT_16550, \
+		.mapbase = JZ4740_UART ## _id ## _BASE_ADDR, \
+		.irq = JZ4740_IRQ_UART ## _id, \
+	}
+
+static struct plat_serial8250_port jz4740_uart_data[] = {
+	JZ4740_UART_DATA(0),
+	JZ4740_UART_DATA(1),
+	{},
+};
+
+static struct platform_device jz4740_uart_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = jz4740_uart_data,
+	},
+};
+
+void jz4740_serial_device_register(void)
+{
+	struct plat_serial8250_port *p;
+
+	for (p = jz4740_uart_data; p->flags != 0; ++p)
+		p->uartclk = jz4740_clock_bdata.ext_rate;
+
+	platform_device_register(&jz4740_uart_device);
+}
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
new file mode 100644
index 00000000000..a9994585424
--- /dev/null
+++ b/arch/mips/jz4740/pm.c
@@ -0,0 +1,56 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *	JZ4740 SoC power management support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+
+#include <asm/mach-jz4740/clock.h>
+
+#include "clock.h"
+#include "irq.h"
+
+static int jz4740_pm_enter(suspend_state_t state)
+{
+	jz4740_intc_suspend();
+	jz4740_clock_suspend();
+
+	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
+
+	__asm__(".set\tmips3\n\t"
+		"wait\n\t"
+		".set\tmips0");
+
+	jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
+
+	jz4740_clock_resume();
+	jz4740_intc_resume();
+
+	return 0;
+}
+
+static struct platform_suspend_ops jz4740_pm_ops = {
+	.valid		= suspend_valid_only_mem,
+	.enter		= jz4740_pm_enter,
+};
+
+static int __init jz4740_pm_init(void)
+{
+	suspend_set_ops(&jz4740_pm_ops);
+	return 0;
+
+}
+late_initcall(jz4740_pm_init);
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
new file mode 100644
index 00000000000..cfeac15eb2e
--- /dev/null
+++ b/arch/mips/jz4740/prom.c
@@ -0,0 +1,68 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC prom code
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <linux/serial_reg.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-jz4740/base.h>
+
+void jz4740_init_cmdline(int argc, char *argv[])
+{
+	unsigned int count = COMMAND_LINE_SIZE - 1;
+	int i;
+	char *dst = &(arcs_cmdline[0]);
+	char *src;
+
+	for (i = 1; i < argc && count; ++i) {
+		src = argv[i];
+		while (*src && count) {
+			*dst++ = *src++;
+			--count;
+		}
+		*dst++ = ' ';
+	}
+	if (i > 1)
+		--dst;
+
+	*dst = 0;
+}
+
+void __init prom_init(void)
+{
+	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
+	mips_machtype = MACH_INGENIC_JZ4740;
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+#define UART_REG(_reg) ((void __iomem *)CKSEG1ADDR(JZ4740_UART0_BASE_ADDR + (_reg << 2)))
+
+void prom_putchar(char c)
+{
+	uint8_t lsr;
+
+	do {
+		lsr = readb(UART_REG(UART_LSR));
+	} while ((lsr & UART_LSR_TEMT) == 0);
+
+	writeb(c, UART_REG(UART_TX));
+}
diff --git a/arch/mips/jz4740/pwm.c b/arch/mips/jz4740/pwm.c
new file mode 100644
index 00000000000..a26a6faec9a
--- /dev/null
+++ b/arch/mips/jz4740/pwm.c
@@ -0,0 +1,177 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform PWM support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pwm.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/gpio.h>
+#include "timer.h"
+
+static struct clk *jz4740_pwm_clk;
+
+DEFINE_MUTEX(jz4740_pwm_mutex);
+
+struct pwm_device {
+	unsigned int id;
+	unsigned int gpio;
+	bool used;
+};
+
+static struct pwm_device jz4740_pwm_list[] = {
+	{ 2, JZ_GPIO_PWM2, false },
+	{ 3, JZ_GPIO_PWM3, false },
+	{ 4, JZ_GPIO_PWM4, false },
+	{ 5, JZ_GPIO_PWM5, false },
+	{ 6, JZ_GPIO_PWM6, false },
+	{ 7, JZ_GPIO_PWM7, false },
+};
+
+struct pwm_device *pwm_request(int id, const char *label)
+{
+	int ret = 0;
+	struct pwm_device *pwm;
+
+	if (id < 2 || id > 7 || !jz4740_pwm_clk)
+		return ERR_PTR(-ENODEV);
+
+	mutex_lock(&jz4740_pwm_mutex);
+
+	pwm = &jz4740_pwm_list[id - 2];
+	if (pwm->used)
+		ret = -EBUSY;
+	else
+		pwm->used = true;
+
+	mutex_unlock(&jz4740_pwm_mutex);
+
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = gpio_request(pwm->gpio, label);
+
+	if (ret) {
+		printk(KERN_ERR "Failed to request pwm gpio: %d\n", ret);
+		pwm->used = false;
+		return ERR_PTR(ret);
+	}
+
+	jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_PWM);
+
+	jz4740_timer_start(id);
+
+	return pwm;
+}
+
+void pwm_free(struct pwm_device *pwm)
+{
+	pwm_disable(pwm);
+	jz4740_timer_set_ctrl(pwm->id, 0);
+
+	jz_gpio_set_function(pwm->gpio, JZ_GPIO_FUNC_NONE);
+	gpio_free(pwm->gpio);
+
+	jz4740_timer_stop(pwm->id);
+
+	pwm->used = false;
+}
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long tmp;
+	unsigned long period, duty;
+	unsigned int prescaler = 0;
+	unsigned int id = pwm->id;
+	uint16_t ctrl;
+	bool is_enabled;
+
+	if (duty_ns < 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	tmp = (unsigned long long)clk_get_rate(jz4740_pwm_clk) * period_ns;
+	do_div(tmp, 1000000000);
+	period = tmp;
+
+	while (period > 0xffff && prescaler < 6) {
+		period >>= 2;
+		++prescaler;
+	}
+
+	if (prescaler == 6)
+		return -EINVAL;
+
+	tmp = (unsigned long long)period * duty_ns;
+	do_div(tmp, period_ns);
+	duty = period - tmp;
+
+	if (duty >= period)
+		duty = period - 1;
+
+	is_enabled = jz4740_timer_is_enabled(id);
+	if (is_enabled)
+		pwm_disable(pwm);
+
+	jz4740_timer_set_count(id, 0);
+	jz4740_timer_set_duty(id, duty);
+	jz4740_timer_set_period(id, period);
+
+	ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
+		JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+
+	jz4740_timer_set_ctrl(id, ctrl);
+
+	if (is_enabled)
+		pwm_enable(pwm);
+
+	return 0;
+}
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id);
+
+	ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_set_ctrl(pwm->id, ctrl);
+	jz4740_timer_enable(pwm->id);
+
+	return 0;
+}
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	uint32_t ctrl = jz4740_timer_get_ctrl(pwm->id);
+
+	ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
+	jz4740_timer_disable(pwm->id);
+	jz4740_timer_set_ctrl(pwm->id, ctrl);
+}
+
+static int __init jz4740_pwm_init(void)
+{
+	int ret = 0;
+
+	jz4740_pwm_clk = clk_get(NULL, "ext");
+
+	if (IS_ERR(jz4740_pwm_clk)) {
+		ret = PTR_ERR(jz4740_pwm_clk);
+		jz4740_pwm_clk = NULL;
+	}
+
+	return ret;
+}
+subsys_initcall(jz4740_pwm_init);
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
new file mode 100644
index 00000000000..5f1fb95c0d0
--- /dev/null
+++ b/arch/mips/jz4740/reset.c
@@ -0,0 +1,79 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+
+#include <asm/mach-jz4740/base.h>
+#include <asm/mach-jz4740/timer.h>
+
+static void jz4740_halt(void)
+{
+	while (1) {
+		__asm__(".set push;\n"
+			".set mips3;\n"
+			"wait;\n"
+			".set pop;\n"
+		);
+	}
+}
+
+#define JZ_REG_WDT_DATA 0x00
+#define JZ_REG_WDT_COUNTER_ENABLE 0x04
+#define JZ_REG_WDT_COUNTER 0x08
+#define JZ_REG_WDT_CTRL 0x0c
+
+static void jz4740_restart(char *command)
+{
+	void __iomem *wdt_base = ioremap(JZ4740_WDT_BASE_ADDR, 0x0f);
+
+	jz4740_timer_enable_watchdog();
+
+	writeb(0, wdt_base + JZ_REG_WDT_COUNTER_ENABLE);
+
+	writew(0, wdt_base + JZ_REG_WDT_COUNTER);
+	writew(0, wdt_base + JZ_REG_WDT_DATA);
+	writew(BIT(2), wdt_base + JZ_REG_WDT_CTRL);
+
+	writeb(1, wdt_base + JZ_REG_WDT_COUNTER_ENABLE);
+	jz4740_halt();
+}
+
+#define JZ_REG_RTC_CTRL		0x00
+#define JZ_REG_RTC_HIBERNATE	0x20
+
+#define JZ_RTC_CTRL_WRDY	BIT(7)
+
+static void jz4740_power_off(void)
+{
+	void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
+	uint32_t ctrl;
+
+	do {
+		ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
+	} while (!(ctrl & JZ_RTC_CTRL_WRDY));
+
+	writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
+	jz4740_halt();
+}
+
+void jz4740_reset_init(void)
+{
+	_machine_restart = jz4740_restart;
+	_machine_halt = jz4740_halt;
+	pm_power_off = jz4740_power_off;
+}
diff --git a/arch/mips/jz4740/reset.h b/arch/mips/jz4740/reset.h
new file mode 100644
index 00000000000..5202ab4ad9d
--- /dev/null
+++ b/arch/mips/jz4740/reset.h
@@ -0,0 +1,6 @@
+#ifndef __MIPS_JZ4740_RESET_H__
+#define __MIPS_JZ4740_RESET_H__
+
+extern void jz4740_reset_init(void);
+
+#endif
diff --git a/arch/mips/jz4740/serial.c b/arch/mips/jz4740/serial.c
new file mode 100644
index 00000000000..d23de45826d
--- /dev/null
+++ b/arch/mips/jz4740/serial.c
@@ -0,0 +1,33 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 serial support
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+void jz4740_serial_out(struct uart_port *p, int offset, int value)
+{
+	switch (offset) {
+	case UART_FCR:
+		value |= 0x10; /* Enable uart module */
+		break;
+	case UART_IER:
+		value |= (value & 0x4) << 2;
+		break;
+	default:
+		break;
+	}
+	writeb(value, p->membase + (offset << p->regshift));
+}
diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h
new file mode 100644
index 00000000000..b9fe3ade028
--- /dev/null
+++ b/arch/mips/jz4740/serial.h
@@ -0,0 +1,20 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 serial support
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MIPS_JZ4740_SERIAL_H__
+
+void jz4740_serial_out(struct uart_port *p, int offset, int value);
+
+#endif
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
new file mode 100644
index 00000000000..6a9e14dab91
--- /dev/null
+++ b/arch/mips/jz4740/setup.c
@@ -0,0 +1,29 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 setup code
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include "reset.h"
+
+void __init plat_mem_setup(void)
+{
+	jz4740_reset_init();
+}
+
+const char *get_system_type(void)
+{
+	return "JZ4740";
+}
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
new file mode 100644
index 00000000000..fe01678d94f
--- /dev/null
+++ b/arch/mips/jz4740/time.c
@@ -0,0 +1,144 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform time support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+
+#include <linux/clockchips.h>
+
+#include <asm/mach-jz4740/irq.h>
+#include <asm/time.h>
+
+#include "clock.h"
+#include "timer.h"
+
+#define TIMER_CLOCKEVENT 0
+#define TIMER_CLOCKSOURCE 1
+
+static uint16_t jz4740_jiffies_per_tick;
+
+static cycle_t jz4740_clocksource_read(struct clocksource *cs)
+{
+	return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
+}
+
+static struct clocksource jz4740_clocksource = {
+	.name = "jz4740-timer",
+	.rating = 200,
+	.read = jz4740_clocksource_read,
+	.mask = CLOCKSOURCE_MASK(16),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static irqreturn_t jz4740_clockevent_irq(int irq, void *devid)
+{
+	struct clock_event_device *cd = devid;
+
+	jz4740_timer_ack_full(TIMER_CLOCKEVENT);
+
+	if (cd->mode != CLOCK_EVT_MODE_PERIODIC)
+		jz4740_timer_disable(TIMER_CLOCKEVENT);
+
+	cd->event_handler(cd);
+
+	return IRQ_HANDLED;
+}
+
+static void jz4740_clockevent_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *cd)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
+		jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
+	case CLOCK_EVT_MODE_RESUME:
+		jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
+		jz4740_timer_enable(TIMER_CLOCKEVENT);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		jz4740_timer_disable(TIMER_CLOCKEVENT);
+		break;
+	default:
+		break;
+	}
+}
+
+static int jz4740_clockevent_set_next(unsigned long evt,
+	struct clock_event_device *cd)
+{
+	jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
+	jz4740_timer_set_period(TIMER_CLOCKEVENT, evt);
+	jz4740_timer_enable(TIMER_CLOCKEVENT);
+
+	return 0;
+}
+
+static struct clock_event_device jz4740_clockevent = {
+	.name = "jz4740-timer",
+	.features = CLOCK_EVT_FEAT_PERIODIC,
+	.set_next_event = jz4740_clockevent_set_next,
+	.set_mode = jz4740_clockevent_set_mode,
+	.rating = 200,
+	.irq = JZ4740_IRQ_TCU0,
+};
+
+static struct irqaction timer_irqaction = {
+	.handler	= jz4740_clockevent_irq,
+	.flags		= IRQF_PERCPU | IRQF_TIMER,
+	.name		= "jz4740-timerirq",
+	.dev_id		= &jz4740_clockevent,
+};
+
+void __init plat_time_init(void)
+{
+	int ret;
+	uint32_t clk_rate;
+	uint16_t ctrl;
+
+	jz4740_timer_init();
+
+	clk_rate = jz4740_clock_bdata.ext_rate >> 4;
+	jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
+
+	clockevent_set_clock(&jz4740_clockevent, clk_rate);
+	jz4740_clockevent.min_delta_ns = clockevent_delta2ns(100, &jz4740_clockevent);
+	jz4740_clockevent.max_delta_ns = clockevent_delta2ns(0xffff, &jz4740_clockevent);
+	jz4740_clockevent.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&jz4740_clockevent);
+
+	clocksource_set_clock(&jz4740_clocksource, clk_rate);
+	ret = clocksource_register(&jz4740_clocksource);
+
+	if (ret)
+		printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
+
+	setup_irq(JZ4740_IRQ_TCU0, &timer_irqaction);
+
+	ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT;
+
+	jz4740_timer_set_ctrl(TIMER_CLOCKEVENT, ctrl);
+	jz4740_timer_set_ctrl(TIMER_CLOCKSOURCE, ctrl);
+
+	jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
+	jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
+
+	jz4740_timer_set_period(TIMER_CLOCKSOURCE, 0xffff);
+
+	jz4740_timer_enable(TIMER_CLOCKEVENT);
+	jz4740_timer_enable(TIMER_CLOCKSOURCE);
+}
diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c
new file mode 100644
index 00000000000..b2c01512905
--- /dev/null
+++ b/arch/mips/jz4740/timer.c
@@ -0,0 +1,48 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform timer support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "timer.h"
+
+#include <asm/mach-jz4740/base.h>
+
+void __iomem *jz4740_timer_base;
+
+void jz4740_timer_enable_watchdog(void)
+{
+	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
+}
+
+void jz4740_timer_disable_watchdog(void)
+{
+	writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
+}
+
+void __init jz4740_timer_init(void)
+{
+	jz4740_timer_base = ioremap(JZ4740_TCU_BASE_ADDR, 0x100);
+
+	if (!jz4740_timer_base)
+		panic("Failed to ioremap timer registers");
+
+	/* Disable all timer clocks except for those used as system timers */
+	writel(0x000100fc, jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
+
+	/* Timer irqs are unmasked by default, mask them */
+	writel(0x00ff00ff, jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
+}
diff --git a/arch/mips/jz4740/timer.h b/arch/mips/jz4740/timer.h
new file mode 100644
index 00000000000..fca3994f2e6
--- /dev/null
+++ b/arch/mips/jz4740/timer.h
@@ -0,0 +1,136 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 platform timer support
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __MIPS_JZ4740_TIMER_H__
+#define __MIPS_JZ4740_TIMER_H__
+
+#include <linux/module.h>
+#include <linux/io.h>
+
+#define JZ_REG_TIMER_STOP		0x0C
+#define JZ_REG_TIMER_STOP_SET		0x1C
+#define JZ_REG_TIMER_STOP_CLEAR		0x2C
+#define JZ_REG_TIMER_ENABLE		0x00
+#define JZ_REG_TIMER_ENABLE_SET		0x04
+#define JZ_REG_TIMER_ENABLE_CLEAR	0x08
+#define JZ_REG_TIMER_FLAG		0x10
+#define JZ_REG_TIMER_FLAG_SET		0x14
+#define JZ_REG_TIMER_FLAG_CLEAR		0x18
+#define JZ_REG_TIMER_MASK		0x20
+#define JZ_REG_TIMER_MASK_SET		0x24
+#define JZ_REG_TIMER_MASK_CLEAR		0x28
+
+#define JZ_REG_TIMER_DFR(x) (((x) * 0x10) + 0x30)
+#define JZ_REG_TIMER_DHR(x) (((x) * 0x10) + 0x34)
+#define JZ_REG_TIMER_CNT(x) (((x) * 0x10) + 0x38)
+#define JZ_REG_TIMER_CTRL(x) (((x) * 0x10) + 0x3C)
+
+#define JZ_TIMER_IRQ_HALF(x) BIT((x) + 0x10)
+#define JZ_TIMER_IRQ_FULL(x) BIT(x)
+
+#define JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN	BIT(9)
+#define JZ_TIMER_CTRL_PWM_ACTIVE_LOW		BIT(8)
+#define JZ_TIMER_CTRL_PWM_ENABLE		BIT(7)
+#define JZ_TIMER_CTRL_PRESCALE_MASK		0x1c
+#define JZ_TIMER_CTRL_PRESCALE_OFFSET		0x3
+#define JZ_TIMER_CTRL_PRESCALE_1		(0 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_4		(1 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_16		(2 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_64		(3 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_256		(4 << 3)
+#define JZ_TIMER_CTRL_PRESCALE_1024		(5 << 3)
+
+#define JZ_TIMER_CTRL_PRESCALER(x) ((x) << JZ_TIMER_CTRL_PRESCALE_OFFSET)
+
+#define JZ_TIMER_CTRL_SRC_EXT		BIT(2)
+#define JZ_TIMER_CTRL_SRC_RTC		BIT(1)
+#define JZ_TIMER_CTRL_SRC_PCLK		BIT(0)
+
+extern void __iomem *jz4740_timer_base;
+void __init jz4740_timer_init(void);
+
+static inline void jz4740_timer_stop(unsigned int timer)
+{
+	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_SET);
+}
+
+static inline void jz4740_timer_start(unsigned int timer)
+{
+	writel(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR);
+}
+
+static inline bool jz4740_timer_is_enabled(unsigned int timer)
+{
+	return readb(jz4740_timer_base + JZ_REG_TIMER_ENABLE) & BIT(timer);
+}
+
+static inline void jz4740_timer_enable(unsigned int timer)
+{
+	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_SET);
+}
+
+static inline void jz4740_timer_disable(unsigned int timer)
+{
+	writeb(BIT(timer), jz4740_timer_base + JZ_REG_TIMER_ENABLE_CLEAR);
+}
+
+
+static inline void jz4740_timer_set_period(unsigned int timer, uint16_t period)
+{
+	writew(period, jz4740_timer_base + JZ_REG_TIMER_DFR(timer));
+}
+
+static inline void jz4740_timer_set_duty(unsigned int timer, uint16_t duty)
+{
+	writew(duty, jz4740_timer_base + JZ_REG_TIMER_DHR(timer));
+}
+
+static inline void jz4740_timer_set_count(unsigned int timer, uint16_t count)
+{
+	writew(count, jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
+}
+
+static inline uint16_t jz4740_timer_get_count(unsigned int timer)
+{
+	return readw(jz4740_timer_base + JZ_REG_TIMER_CNT(timer));
+}
+
+static inline void jz4740_timer_ack_full(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
+}
+
+static inline void jz4740_timer_irq_full_enable(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_FLAG_CLEAR);
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_CLEAR);
+}
+
+static inline void jz4740_timer_irq_full_disable(unsigned int timer)
+{
+	writel(JZ_TIMER_IRQ_FULL(timer), jz4740_timer_base + JZ_REG_TIMER_MASK_SET);
+}
+
+static inline void jz4740_timer_set_ctrl(unsigned int timer, uint16_t ctrl)
+{
+	writew(ctrl, jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
+}
+
+static inline uint16_t jz4740_timer_get_ctrl(unsigned int timer)
+{
+	return readw(jz4740_timer_base + JZ_REG_TIMER_CTRL(timer));
+}
+
+#endif
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 7a6ac501cbb..06f84829978 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
 obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o
 
+obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
 obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
@@ -101,6 +102,4 @@ obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o
 
 obj-$(CONFIG_MIPS_CPUFREQ)	+= cpufreq/
 
-EXTRA_CFLAGS += -Werror
-
 CPPFLAGS_vmlinux.lds		:= $(KBUILD_CFLAGS)
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index ca6c83218ca..6b30fb2caa6 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -126,7 +126,6 @@ void output_thread_defines(void)
 	       thread.cp0_baduaddr);
 	OFFSET(THREAD_ECODE, task_struct, \
 	       thread.error_code);
-	OFFSET(THREAD_TRAPNO, task_struct, thread.trap_no);
 	OFFSET(THREAD_TRAMP, task_struct, \
 	       thread.irix_trampoline);
 	OFFSET(THREAD_OLDCTX, task_struct, \
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 0b2450ceb13..2a4d50ff5e2 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -163,7 +163,6 @@ int c0_compare_int_usable(void)
 
 int __cpuinit r4k_clockevent_init(void)
 {
-	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *cd;
 	unsigned int irq;
@@ -188,9 +187,9 @@ int __cpuinit r4k_clockevent_init(void)
 	cd->name		= "MIPS";
 	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
 
+	clockevent_set_clock(cd, mips_hpt_frequency);
+
 	/* Calculate the min / max delta */
-	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 32;
 	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
 	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
 
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 408d0a07b3a..b8bb8ba6086 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -239,7 +239,7 @@ static inline void check_daddi(void)
 	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
 }
 
-int daddiu_bug __cpuinitdata = -1;
+int daddiu_bug  = -1;
 
 static inline void check_daddiu(void)
 {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 3562b854f2c..b1b304ea212 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -187,6 +187,7 @@ void __init check_wait(void)
 	case CPU_BCM6358:
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_JZRISC:
 		cpu_wait = r4k_wait;
 		break;
 
@@ -760,6 +761,9 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 		ok = decode_config4(c);
 
 	mips_probe_watch_registers(c);
+
+	if (cpu_has_mips_r2)
+		c->core = read_c0_ebase() & 0x3ff;
 }
 
 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
@@ -956,6 +960,22 @@ platform:
 	}
 }
 
+static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	/* JZRISC does not implement the CP0 counter. */
+	c->options &= ~MIPS_CPU_COUNTER;
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_JZRISC:
+		c->cputype = CPU_JZRISC;
+		__cpu_name[cpu] = "Ingenic JZRISC";
+		break;
+	default:
+		panic("Unknown Ingenic Processor ID!");
+		break;
+	}
+}
+
 const char *__cpu_name[NR_CPUS];
 const char *__elf_platform;
 
@@ -994,6 +1014,9 @@ __cpuinit void cpu_probe(void)
 	case PRID_COMP_CAVIUM:
 		cpu_probe_cavium(c, cpu);
 		break;
+	case PRID_COMP_INGENIC:
+		cpu_probe_ingenic(c, cpu);
+		break;
 	}
 
 	BUG_ON(!__cpu_name[cpu]);
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 9b78ff6e9b8..1f4e2fa6414 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -50,6 +50,151 @@ static struct hard_trap_info {
 	{ 0, 0}			/* Must be last */
 };
 
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
+{
+	{ "zero", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) },
+	{ "at", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) },
+	{ "v0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) },
+	{ "v1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) },
+	{ "a0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) },
+	{ "a1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) },
+	{ "a2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) },
+	{ "a3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) },
+	{ "t0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) },
+	{ "t1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) },
+	{ "t2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) },
+	{ "t3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) },
+	{ "t4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) },
+	{ "t5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) },
+	{ "t6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) },
+	{ "t7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) },
+	{ "s0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16]) },
+	{ "s1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17]) },
+	{ "s2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18]) },
+	{ "s3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19]) },
+	{ "s4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20]) },
+	{ "s5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21]) },
+	{ "s6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22]) },
+	{ "s7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23]) },
+	{ "t8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24]) },
+	{ "t9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25]) },
+	{ "k0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26]) },
+	{ "k1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27]) },
+	{ "gp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28]) },
+	{ "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29]) },
+	{ "s8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30]) },
+	{ "ra", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31]) },
+	{ "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_status) },
+	{ "lo", GDB_SIZEOF_REG, offsetof(struct pt_regs, lo) },
+	{ "hi", GDB_SIZEOF_REG, offsetof(struct pt_regs, hi) },
+	{ "bad", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_badvaddr) },
+	{ "cause", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_cause) },
+	{ "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_epc) },
+	{ "f0", GDB_SIZEOF_REG, 0 },
+	{ "f1", GDB_SIZEOF_REG, 1 },
+	{ "f2", GDB_SIZEOF_REG, 2 },
+	{ "f3", GDB_SIZEOF_REG, 3 },
+	{ "f4", GDB_SIZEOF_REG, 4 },
+	{ "f5", GDB_SIZEOF_REG, 5 },
+	{ "f6", GDB_SIZEOF_REG, 6 },
+	{ "f7", GDB_SIZEOF_REG, 7 },
+	{ "f8", GDB_SIZEOF_REG, 8 },
+	{ "f9", GDB_SIZEOF_REG, 9 },
+	{ "f10", GDB_SIZEOF_REG, 10 },
+	{ "f11", GDB_SIZEOF_REG, 11 },
+	{ "f12", GDB_SIZEOF_REG, 12 },
+	{ "f13", GDB_SIZEOF_REG, 13 },
+	{ "f14", GDB_SIZEOF_REG, 14 },
+	{ "f15", GDB_SIZEOF_REG, 15 },
+	{ "f16", GDB_SIZEOF_REG, 16 },
+	{ "f17", GDB_SIZEOF_REG, 17 },
+	{ "f18", GDB_SIZEOF_REG, 18 },
+	{ "f19", GDB_SIZEOF_REG, 19 },
+	{ "f20", GDB_SIZEOF_REG, 20 },
+	{ "f21", GDB_SIZEOF_REG, 21 },
+	{ "f22", GDB_SIZEOF_REG, 22 },
+	{ "f23", GDB_SIZEOF_REG, 23 },
+	{ "f24", GDB_SIZEOF_REG, 24 },
+	{ "f25", GDB_SIZEOF_REG, 25 },
+	{ "f26", GDB_SIZEOF_REG, 26 },
+	{ "f27", GDB_SIZEOF_REG, 27 },
+	{ "f28", GDB_SIZEOF_REG, 28 },
+	{ "f29", GDB_SIZEOF_REG, 29 },
+	{ "f30", GDB_SIZEOF_REG, 30 },
+	{ "f31", GDB_SIZEOF_REG, 31 },
+	{ "fsr", GDB_SIZEOF_REG, 0 },
+	{ "fir", GDB_SIZEOF_REG, 0 },
+};
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	int fp_reg;
+
+	if (regno < 0 || regno >= DBG_MAX_REG_NUM)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1 && regno < 38) {
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	} else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) {
+		/* FP registers 38 -> 69 */
+		if (!(regs->cp0_status & ST0_CU1))
+			return 0;
+		if (regno == 70) {
+			/* Process the fcr31/fsr (register 70) */
+			memcpy((void *)&current->thread.fpu.fcr31, mem,
+			       dbg_reg_def[regno].size);
+			goto out_save;
+		} else if (regno == 71) {
+			/* Ignore the fir (register 71) */
+			goto out_save;
+		}
+		fp_reg = dbg_reg_def[regno].offset;
+		memcpy((void *)&current->thread.fpu.fpr[fp_reg], mem,
+		       dbg_reg_def[regno].size);
+out_save:
+		restore_fp(current);
+	}
+
+	return 0;
+}
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	int fp_reg;
+
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1 && regno < 38) {
+		/* First 38 registers */
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	} else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) {
+		/* FP registers 38 -> 69 */
+		if (!(regs->cp0_status & ST0_CU1))
+			goto out;
+		save_fp(current);
+		if (regno == 70) {
+			/* Process the fcr31/fsr (register 70) */
+			memcpy(mem, (void *)&current->thread.fpu.fcr31,
+			       dbg_reg_def[regno].size);
+			goto out;
+		} else if (regno == 71) {
+			/* Ignore the fir (register 71) */
+			memset(mem, 0, dbg_reg_def[regno].size);
+			goto out;
+		}
+		fp_reg = dbg_reg_def[regno].offset;
+		memcpy(mem, (void *)&current->thread.fpu.fpr[fp_reg],
+		       dbg_reg_def[regno].size);
+	}
+
+out:
+	return dbg_reg_def[regno].name;
+
+}
+
 void arch_kgdb_breakpoint(void)
 {
 	__asm__ __volatile__(
@@ -84,64 +229,6 @@ static int compute_signal(int tt)
 	return SIGHUP;		/* default for things we don't know about */
 }
 
-void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
-{
-	int reg;
-
-#if (KGDB_GDB_REG_SIZE == 32)
-	u32 *ptr = (u32 *)gdb_regs;
-#else
-	u64 *ptr = (u64 *)gdb_regs;
-#endif
-
-	for (reg = 0; reg < 32; reg++)
-		*(ptr++) = regs->regs[reg];
-
-	*(ptr++) = regs->cp0_status;
-	*(ptr++) = regs->lo;
-	*(ptr++) = regs->hi;
-	*(ptr++) = regs->cp0_badvaddr;
-	*(ptr++) = regs->cp0_cause;
-	*(ptr++) = regs->cp0_epc;
-
-	/* FP REGS */
-	if (!(current && (regs->cp0_status & ST0_CU1)))
-		return;
-
-	save_fp(current);
-	for (reg = 0; reg < 32; reg++)
-		*(ptr++) = current->thread.fpu.fpr[reg];
-}
-
-void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
-{
-	int reg;
-
-#if (KGDB_GDB_REG_SIZE == 32)
-	const u32 *ptr = (u32 *)gdb_regs;
-#else
-	const u64 *ptr = (u64 *)gdb_regs;
-#endif
-
-	for (reg = 0; reg < 32; reg++)
-		regs->regs[reg] = *(ptr++);
-
-	regs->cp0_status = *(ptr++);
-	regs->lo = *(ptr++);
-	regs->hi = *(ptr++);
-	regs->cp0_badvaddr = *(ptr++);
-	regs->cp0_cause = *(ptr++);
-	regs->cp0_epc = *(ptr++);
-
-	/* FP REGS from current */
-	if (!(current && (regs->cp0_status & ST0_CU1)))
-		return;
-
-	for (reg = 0; reg < 32; reg++)
-		current->thread.fpu.fpr[reg] = *(ptr++);
-	restore_fp(current);
-}
-
 /*
  * Similar to regs_to_gdb_regs() except that process is sleeping and so
  * we may not be able to get all the info.
@@ -242,7 +329,7 @@ static struct notifier_block kgdb_notifier = {
 };
 
 /*
- * Handle the 's' and 'c' commands
+ * Handle the 'c' command
  */
 int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 			       char *remcom_in_buffer, char *remcom_out_buffer,
@@ -250,20 +337,14 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 {
 	char *ptr;
 	unsigned long address;
-	int cpu = smp_processor_id();
 
 	switch (remcom_in_buffer[0]) {
-	case 's':
 	case 'c':
 		/* handle the optional parameter */
 		ptr = &remcom_in_buffer[1];
 		if (kgdb_hex2long(&ptr, &address))
 			regs->cp0_epc = address;
 
-		atomic_set(&kgdb_cpu_doing_single_step, -1);
-		if (remcom_in_buffer[0] == 's')
-			atomic_set(&kgdb_cpu_doing_single_step, cpu);
-
 		return 0;
 	}
 
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
new file mode 100644
index 00000000000..ee28683fc2a
--- /dev/null
+++ b/arch/mips/kernel/kprobes.c
@@ -0,0 +1,557 @@
+/*
+ *  Kernel Probes (KProbes)
+ *  arch/mips/kernel/kprobes.c
+ *
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2010 Cavium Networks
+ *
+ *  Some portions copied from the powerpc version.
+ *
+ *   Copyright (C) IBM Corporation, 2002, 2004
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kprobes.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <linux/slab.h>
+
+#include <asm/ptrace.h>
+#include <asm/break.h>
+#include <asm/inst.h>
+
+static const union mips_instruction breakpoint_insn = {
+	.b_format = {
+		.opcode = spec_op,
+		.code = BRK_KPROBE_BP,
+		.func = break_op
+	}
+};
+
+static const union mips_instruction breakpoint2_insn = {
+	.b_format = {
+		.opcode = spec_op,
+		.code = BRK_KPROBE_SSTEPBP,
+		.func = break_op
+	}
+};
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe);
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static int __kprobes insn_has_delayslot(union mips_instruction insn)
+{
+	switch (insn.i_format.opcode) {
+
+		/*
+		 * This group contains:
+		 * jr and jalr are in r_format format.
+		 */
+	case spec_op:
+		switch (insn.r_format.func) {
+		case jr_op:
+		case jalr_op:
+			break;
+		default:
+			goto insn_ok;
+		}
+
+		/*
+		 * This group contains:
+		 * bltz_op, bgez_op, bltzl_op, bgezl_op,
+		 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+		 */
+	case bcond_op:
+
+		/*
+		 * These are unconditional and in j_format.
+		 */
+	case jal_op:
+	case j_op:
+
+		/*
+		 * These are conditional and in i_format.
+		 */
+	case beq_op:
+	case beql_op:
+	case bne_op:
+	case bnel_op:
+	case blez_op:
+	case blezl_op:
+	case bgtz_op:
+	case bgtzl_op:
+
+		/*
+		 * These are the FPA/cp1 branch instructions.
+		 */
+	case cop1_op:
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case lwc2_op: /* This is bbit0 on Octeon */
+	case ldc2_op: /* This is bbit032 on Octeon */
+	case swc2_op: /* This is bbit1 on Octeon */
+	case sdc2_op: /* This is bbit132 on Octeon */
+#endif
+		return 1;
+	default:
+		break;
+	}
+insn_ok:
+	return 0;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	union mips_instruction insn;
+	union mips_instruction prev_insn;
+	int ret = 0;
+
+	prev_insn = p->addr[-1];
+	insn = p->addr[0];
+
+	if (insn_has_delayslot(insn) || insn_has_delayslot(prev_insn)) {
+		pr_notice("Kprobes for branch and jump instructions are not supported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* insn: must be on special executable page on mips. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * In the kprobe->ainsn.insn[] array we store the original
+	 * instruction at index zero and a break trap instruction at
+	 * index one.
+	 */
+
+	memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
+	p->ainsn.insn[1] = breakpoint2_insn;
+	p->opcode = *p->addr;
+
+out:
+	return ret;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	*p->addr = breakpoint_insn;
+	flush_insn_slot(p);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	*p->addr = p->opcode;
+	flush_insn_slot(p);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	free_insn_slot(p->ainsn.insn, 0);
+}
+
+static void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	kcb->prev_kprobe.old_SR = kcb->kprobe_old_SR;
+	kcb->prev_kprobe.saved_SR = kcb->kprobe_saved_SR;
+	kcb->prev_kprobe.saved_epc = kcb->kprobe_saved_epc;
+}
+
+static void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+	kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR;
+	kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR;
+	kcb->kprobe_saved_epc = kcb->prev_kprobe.saved_epc;
+}
+
+static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+			       struct kprobe_ctlblk *kcb)
+{
+	__get_cpu_var(current_kprobe) = p;
+	kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE);
+	kcb->kprobe_saved_epc = regs->cp0_epc;
+}
+
+static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+	regs->cp0_status &= ~ST0_IE;
+
+	/* single step inline if the instruction is a break */
+	if (p->opcode.word == breakpoint_insn.word ||
+	    p->opcode.word == breakpoint2_insn.word)
+		regs->cp0_epc = (unsigned long)p->addr;
+	else
+		regs->cp0_epc = (unsigned long)&p->ainsn.insn[0];
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *p;
+	int ret = 0;
+	kprobe_opcode_t *addr;
+	struct kprobe_ctlblk *kcb;
+
+	addr = (kprobe_opcode_t *) regs->cp0_epc;
+
+	/*
+	 * We don't want to be preempted for the entire
+	 * duration of kprobe processing
+	 */
+	preempt_disable();
+	kcb = get_kprobe_ctlblk();
+
+	/* Check we're not actually recursing */
+	if (kprobe_running()) {
+		p = get_kprobe(addr);
+		if (p) {
+			if (kcb->kprobe_status == KPROBE_HIT_SS &&
+			    p->ainsn.insn->word == breakpoint_insn.word) {
+				regs->cp0_status &= ~ST0_IE;
+				regs->cp0_status |= kcb->kprobe_saved_SR;
+				goto no_kprobe;
+			}
+			/*
+			 * We have reentered the kprobe_handler(), since
+			 * another probe was hit while within the handler.
+			 * We here save the original kprobes variables and
+			 * just single step on the instruction of the new probe
+			 * without calling any user handlers.
+			 */
+			save_previous_kprobe(kcb);
+			set_current_kprobe(p, regs, kcb);
+			kprobes_inc_nmissed_count(p);
+			prepare_singlestep(p, regs);
+			kcb->kprobe_status = KPROBE_REENTER;
+			return 1;
+		} else {
+			if (addr->word != breakpoint_insn.word) {
+				/*
+				 * The breakpoint instruction was removed by
+				 * another cpu right after we hit, no further
+				 * handling of this interrupt is appropriate
+				 */
+				ret = 1;
+				goto no_kprobe;
+			}
+			p = __get_cpu_var(current_kprobe);
+			if (p->break_handler && p->break_handler(p, regs))
+				goto ss_probe;
+		}
+		goto no_kprobe;
+	}
+
+	p = get_kprobe(addr);
+	if (!p) {
+		if (addr->word != breakpoint_insn.word) {
+			/*
+			 * The breakpoint instruction was removed right
+			 * after we hit it.  Another cpu has removed
+			 * either a probepoint or a debugger breakpoint
+			 * at this address.  In either case, no further
+			 * handling of this interrupt is appropriate.
+			 */
+			ret = 1;
+		}
+		/* Not one of ours: let kernel handle it */
+		goto no_kprobe;
+	}
+
+	set_current_kprobe(p, regs, kcb);
+	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+	if (p->pre_handler && p->pre_handler(p, regs)) {
+		/* handler has already set things up, so skip ss setup */
+		return 1;
+	}
+
+ss_probe:
+	prepare_singlestep(p, regs);
+	kcb->kprobe_status = KPROBE_HIT_SS;
+	return 1;
+
+no_kprobe:
+	preempt_enable_no_resched();
+	return ret;
+
+}
+
+/*
+ * Called after single-stepping.  p->addr is the address of the
+ * instruction whose first byte has been replaced by the "break 0"
+ * instruction.  To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction.  The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * breakpoint trap.
+ */
+static void __kprobes resume_execution(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb)
+{
+	unsigned long orig_epc = kcb->kprobe_saved_epc;
+	regs->cp0_epc = orig_epc + 4;
+}
+
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (!cur)
+		return 0;
+
+	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+		kcb->kprobe_status = KPROBE_HIT_SSDONE;
+		cur->post_handler(cur, regs, 0);
+	}
+
+	resume_execution(cur, regs, kcb);
+
+	regs->cp0_status |= kcb->kprobe_saved_SR;
+
+	/* Restore back the original saved kprobes variables and continue. */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		goto out;
+	}
+	reset_current_kprobe();
+out:
+	preempt_enable_no_resched();
+
+	return 1;
+}
+
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+		return 1;
+
+	if (kcb->kprobe_status & KPROBE_HIT_SS) {
+		resume_execution(cur, regs, kcb);
+		regs->cp0_status |= kcb->kprobe_old_SR;
+
+		reset_current_kprobe();
+		preempt_enable_no_resched();
+	}
+	return 0;
+}
+
+/*
+ * Wrapper routine for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
+{
+
+	struct die_args *args = (struct die_args *)data;
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_BREAK:
+		if (kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+	case DIE_SSTEPBP:
+		if (post_kprobe_handler(args->regs))
+			ret = NOTIFY_STOP;
+		break;
+
+	case DIE_PAGE_FAULT:
+		/* kprobe_running() needs smp_processor_id() */
+		preempt_disable();
+
+		if (kprobe_running()
+		    && kprobe_fault_handler(args->regs, args->trapnr))
+			ret = NOTIFY_STOP;
+		preempt_enable();
+		break;
+	default:
+		break;
+	}
+	return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct jprobe *jp = container_of(p, struct jprobe, kp);
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	kcb->jprobe_saved_regs = *regs;
+	kcb->jprobe_saved_sp = regs->regs[29];
+
+	memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp,
+	       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+
+	regs->cp0_epc = (unsigned long)(jp->entry);
+
+	return 1;
+}
+
+/* Defined in the inline asm below. */
+void jprobe_return_end(void);
+
+void __kprobes jprobe_return(void)
+{
+	/* Assembler quirk necessitates this '0,code' business.  */
+	asm volatile(
+		"break 0,%0\n\t"
+		".globl jprobe_return_end\n"
+		"jprobe_return_end:\n"
+		: : "n" (BRK_KPROBE_BP) : "memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (regs->cp0_epc >= (unsigned long)jprobe_return &&
+	    regs->cp0_epc <= (unsigned long)jprobe_return_end) {
+		*regs = kcb->jprobe_saved_regs;
+		memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack,
+		       MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+		preempt_enable_no_resched();
+
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Function return probe trampoline:
+ *	- init_kprobes() establishes a probepoint here
+ *	- When the probed function returns, this probe causes the
+ *	  handlers to fire
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+	asm volatile(
+		".set push\n\t"
+		/* Keep the assembler from reordering and placing JR here. */
+		".set noreorder\n\t"
+		"nop\n\t"
+		".global kretprobe_trampoline\n"
+		"kretprobe_trampoline:\n\t"
+		"nop\n\t"
+		".set pop"
+		: : : "memory");
+}
+
+void kretprobe_trampoline(void);
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *) regs->regs[31];
+
+	/* Replace the return addr with trampoline addr */
+	regs->regs[31] = (unsigned long)kretprobe_trampoline;
+}
+
+/*
+ * Called when the probe at kretprobe trampoline is hit
+ */
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+						struct pt_regs *regs)
+{
+	struct kretprobe_instance *ri = NULL;
+	struct hlist_head *head, empty_rp;
+	struct hlist_node *node, *tmp;
+	unsigned long flags, orig_ret_address = 0;
+	unsigned long trampoline_address = (unsigned long)kretprobe_trampoline;
+
+	INIT_HLIST_HEAD(&empty_rp);
+	kretprobe_hash_lock(current, &head, &flags);
+
+	/*
+	 * It is possible to have multiple instances associated with a given
+	 * task either because an multiple functions in the call path
+	 * have a return probe installed on them, and/or more than one return
+	 * return probe was registered for a target function.
+	 *
+	 * We can handle this because:
+	 *     - instances are always inserted at the head of the list
+	 *     - when multiple return probes are registered for the same
+	 *       function, the first instance's ret_addr will point to the
+	 *       real return address, and all the rest will point to
+	 *       kretprobe_trampoline
+	 */
+	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		if (ri->rp && ri->rp->handler)
+			ri->rp->handler(ri, regs);
+
+		orig_ret_address = (unsigned long)ri->ret_addr;
+		recycle_rp_inst(ri, &empty_rp);
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+	instruction_pointer(regs) = orig_ret_address;
+
+	reset_current_kprobe();
+	kretprobe_hash_unlock(current, &flags);
+	preempt_enable_no_resched();
+
+	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+		hlist_del(&ri->hlist);
+		kfree(ri);
+	}
+	/*
+	 * By returning a non-zero value, we are telling
+	 * kprobe_handler() that we don't want the post_handler
+	 * to run (and have re-enabled preemption)
+	 */
+	return 1;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline)
+		return 1;
+
+	return 0;
+}
+
+static struct kprobe trampoline_p = {
+	.addr = (kprobe_opcode_t *)kretprobe_trampoline,
+	.pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+	return register_kprobe(&trampoline_p);
+}
diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S
index 6bfcb7a00ec..4c968e7efb7 100644
--- a/arch/mips/kernel/mcount.S
+++ b/arch/mips/kernel/mcount.S
@@ -165,12 +165,12 @@ NESTED(ftrace_graph_caller, PT_SIZE, ra)
 
 	/* arg3: Get frame pointer of current stack */
 #ifdef CONFIG_FRAME_POINTER
-	 move	a2, fp
+	move	a2, fp
 #else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
-	 PTR_LA	a2, PT_SIZE(sp)
+	PTR_LA	a2, PT_SIZE(sp)
 #else
-	 PTR_LA	a2, (PT_SIZE+8)(sp)
+	PTR_LA	a2, (PT_SIZE+8)(sp)
 #endif
 #endif
 
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a4faceea9d8..a3d66137731 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -400,22 +400,22 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ioprio_set
 	PTR	sys_ioprio_get
 	PTR	compat_sys_utimensat
-	PTR	compat_sys_signalfd		/* 5280 */
+	PTR	compat_sys_signalfd		/* 6280 */
 	PTR	sys_ni_syscall
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
-	PTR	compat_sys_timerfd_gettime	/* 5285 */
+	PTR	compat_sys_timerfd_gettime	/* 6285 */
 	PTR	compat_sys_timerfd_settime
 	PTR	sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1
-	PTR	sys_dup3			/* 5290 */
+	PTR	sys_dup3			/* 6290 */
 	PTR	sys_pipe2
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
 	PTR	sys_pwritev
-	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
+	PTR	compat_sys_rt_tgsigqueueinfo	/* 6295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 6cdca1956b7..383aeb95cb4 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -47,8 +47,12 @@
 #endif /* CONFIG_MIPS_MT_SMTC */
 
 volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
+
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
+EXPORT_SYMBOL(__cpu_number_map);
+
 int __cpu_logical_map[NR_CPUS];		/* Map logical to physical */
+EXPORT_SYMBOL(__cpu_logical_map);
 
 /* Number of TCs (or siblings in Intel speak) per CPU core */
 int smp_num_siblings = 1;
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index a95dea5459c..cfeb2c15589 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -975,8 +975,7 @@ void ipi_decode(struct smtc_ipi *pipi)
 			ipi_call_interrupt();
 			break;
 		default:
-			printk("Impossible SMTC IPI Argument 0x%x\n",
-				(int)arg_copy);
+			printk("Impossible SMTC IPI Argument %p\n", arg_copy);
 			break;
 		}
 		break;
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index dd81b0f8751..58bab2ef257 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -29,6 +29,8 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/elf.h>
 
 #include <asm/asm.h>
 #include <asm/branch.h>
@@ -116,7 +118,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		    (!vmm || addr + len <= vmm->vm_start))
 			return addr;
 	}
-	addr = TASK_UNMAPPED_BASE;
+	addr = current->mm->mmap_base;
 	if (do_color_align)
 		addr = COLOUR_ALIGN(addr, pgoff);
 	else
@@ -134,6 +136,51 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	}
 }
 
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+	unsigned long random_factor = 0UL;
+
+	if (current->flags & PF_RANDOMIZE) {
+		random_factor = get_random_int();
+		random_factor = random_factor << PAGE_SHIFT;
+		if (TASK_IS_32BIT_ADDR)
+			random_factor &= 0xfffffful;
+		else
+			random_factor &= 0xffffffful;
+	}
+
+	mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
+	mm->get_unmapped_area = arch_get_unmapped_area;
+	mm->unmap_area = arch_unmap_area;
+}
+
+static inline unsigned long brk_rnd(void)
+{
+	unsigned long rnd = get_random_int();
+
+	rnd = rnd << PAGE_SHIFT;
+	/* 8MB for 32bit, 256MB for 64bit */
+	if (TASK_IS_32BIT_ADDR)
+		rnd = rnd & 0x7ffffful;
+	else
+		rnd = rnd & 0xffffffful;
+
+	return rnd;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+	unsigned long base = mm->brk;
+	unsigned long ret;
+
+	ret = PAGE_ALIGN(base + brk_rnd());
+
+	if (ret < mm->brk)
+		return mm->brk;
+
+	return ret;
+}
+
 SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
 	unsigned long, prot, unsigned long, flags, unsigned long,
 	fd, off_t, offset)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 852780868fb..03ec0019032 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -25,6 +25,7 @@
 #include <linux/ptrace.h>
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
+#include <linux/kprobes.h>
 #include <linux/notifier.h>
 #include <linux/kdb.h>
 
@@ -334,7 +335,7 @@ void show_regs(struct pt_regs *regs)
 	__show_regs((struct pt_regs *)regs);
 }
 
-void show_registers(const struct pt_regs *regs)
+void show_registers(struct pt_regs *regs)
 {
 	const int field = 2 * sizeof(unsigned long);
 
@@ -356,9 +357,14 @@ void show_registers(const struct pt_regs *regs)
 	printk("\n");
 }
 
+static int regs_to_trapnr(struct pt_regs *regs)
+{
+	return (regs->cp0_cause >> 2) & 0x1f;
+}
+
 static DEFINE_SPINLOCK(die_lock);
 
-void __noreturn die(const char * str, struct pt_regs * regs)
+void __noreturn die(const char *str, struct pt_regs *regs)
 {
 	static int die_counter;
 	int sig = SIGSEGV;
@@ -366,7 +372,7 @@ void __noreturn die(const char * str, struct pt_regs * regs)
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	notify_die(DIE_OOPS, str, (struct pt_regs *)regs, SIGSEGV, 0, 0);
+	notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV);
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
@@ -375,7 +381,7 @@ void __noreturn die(const char * str, struct pt_regs * regs)
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
 
-	if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+	if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP)
 		sig = 0;
 
 	printk("%s[#%d]:\n", str, ++die_counter);
@@ -449,7 +455,7 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
-	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	if (notify_die(DIE_OOPS, "bus error", regs, 0, regs_to_trapnr(regs), SIGBUS)
 	    == NOTIFY_STOP)
 		return;
 
@@ -650,7 +656,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
-	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
 	    == NOTIFY_STOP)
 		return;
 	die_if_kernel("FP exception in kernel code", regs);
@@ -713,11 +719,11 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	char b[40];
 
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
-	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 		return;
 #endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
 
-	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+	if (notify_die(DIE_TRAP, str, regs, code, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/*
@@ -783,6 +789,25 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	if (bcode >= (1 << 10))
 		bcode >>= 10;
 
+	/*
+	 * notify the kprobe handlers, if instruction is likely to
+	 * pertain to them.
+	 */
+	switch (bcode) {
+	case BRK_KPROBE_BP:
+		if (notify_die(DIE_BREAK, "debug", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+			return;
+		else
+			break;
+	case BRK_KPROBE_SSTEPBP:
+		if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, regs_to_trapnr(regs), SIGTRAP) == NOTIFY_STOP)
+			return;
+		else
+			break;
+	default:
+		break;
+	}
+
 	do_trap_or_bp(regs, bcode, "Break");
 	return;
 
@@ -815,7 +840,7 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
-	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	if (notify_die(DIE_RI, "RI Fault", regs, 0, regs_to_trapnr(regs), SIGILL)
 	    == NOTIFY_STOP)
 		return;
 
@@ -907,11 +932,6 @@ static int default_cu2_call(struct notifier_block *nfb, unsigned long action,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block default_cu2_notifier = {
-	.notifier_call	= default_cu2_call,
-	.priority	= 0x80000000,		/* Run last  */
-};
-
 asmlinkage void do_cpu(struct pt_regs *regs)
 {
 	unsigned int __user *epc;
@@ -1734,5 +1754,5 @@ void __init trap_init(void)
 
 	sort_extable(__start___dbe_table, __stop___dbe_table);
 
-	register_cu2_notifier(&default_cu2_notifier);
+	cu2_notifier(default_cu2_call, 0x80000000);	/* Run last  */
 }
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
index 33791609fe9..9cc4e4db8b9 100644
--- a/arch/mips/lasat/Makefile
+++ b/arch/mips/lasat/Makefile
@@ -12,5 +12,3 @@ obj-$(CONFIG_PICVUE_PROC)	+= picvue_proc.o
 
 clean:
 	make -C image clean
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/lasat/Platform b/arch/mips/lasat/Platform
new file mode 100644
index 00000000000..760252828bf
--- /dev/null
+++ b/arch/mips/lasat/Platform
@@ -0,0 +1,7 @@
+#
+# LASAT platforms
+#
+platform-$(CONFIG_LASAT)	+= lasat/
+cflags-$(CONFIG_LASAT)		+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-lasat
+load-$(CONFIG_LASAT)		+= 0xffffffff80000000
diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson/Platform
new file mode 100644
index 00000000000..29692e5433b
--- /dev/null
+++ b/arch/mips/loongson/Platform
@@ -0,0 +1,32 @@
+#
+# Loongson Processors' Support
+#
+
+# Only gcc >= 4.4 have Loongson specific support
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2E) += \
+	$(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+	$(call cc-option,-march=loongson2f,-march=r4600)
+# Enable the workarounds for Loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+  else
+    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+  endif
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+  else
+    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+  endif
+endif
+
+#
+# Loongson Machines' Support
+#
+
+platform-$(CONFIG_MACH_LOONGSON) += loongson/
+cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
diff --git a/arch/mips/loongson/common/cs5536/Makefile b/arch/mips/loongson/common/cs5536/Makefile
index 510d4cdc237..f12e6400734 100644
--- a/arch/mips/loongson/common/cs5536/Makefile
+++ b/arch/mips/loongson/common/cs5536/Makefile
@@ -9,5 +9,3 @@ obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \
 # Enable cs5536 mfgpt Timer
 #
 obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c
index 20e73283197..5897471dedc 100644
--- a/arch/mips/loongson/common/irq.c
+++ b/arch/mips/loongson/common/irq.c
@@ -21,19 +21,16 @@ void bonito_irqdispatch(void)
 
 	/* workaround the IO dma problem: let cpu looping to allow DMA finish */
 	int_status = LOONGSON_INTISR;
-	if (int_status & (1 << 10)) {
-		while (int_status & (1 << 10)) {
-			udelay(1);
-			int_status = LOONGSON_INTISR;
-		}
+	while (int_status & (1 << 10)) {
+		udelay(1);
+		int_status = LOONGSON_INTISR;
 	}
 
 	/* Get pending sources, masked by current enables */
 	int_status = LOONGSON_INTISR & LOONGSON_INTEN;
 
-	if (int_status != 0) {
+	if (int_status) {
 		i = __ffs(int_status);
-		int_status &= ~(1 << i);
 		do_IRQ(LOONGSON_IRQ_BASE + i);
 	}
 }
@@ -56,9 +53,6 @@ void __init arch_init_irq(void)
 	 */
 	clear_c0_status(ST0_IM | ST0_BEV);
 
-	/* setting irq trigger mode */
-	set_irq_trigger_mode();
-
 	/* no steer */
 	LOONGSON_INTSTEER = 0;
 
diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile
index 3aba5fcc09d..b7622720c1a 100644
--- a/arch/mips/loongson/fuloong-2e/Makefile
+++ b/arch/mips/loongson/fuloong-2e/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y += irq.o reset.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c
index 320e9379bdd..d61a04222b8 100644
--- a/arch/mips/loongson/fuloong-2e/irq.c
+++ b/arch/mips/loongson/fuloong-2e/irq.c
@@ -30,7 +30,7 @@ asmlinkage void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 	else if (pending & CAUSEF_IP6) /* perf counter loverflow */
-		do_IRQ(LOONGSON2_PERFCNT_IRQ);
+		do_perfcnt_IRQ();
 	else if (pending & CAUSEF_IP5)
 		i8259_irqdispatch();
 	else if (pending & CAUSEF_IP2)
@@ -44,13 +44,6 @@ static struct irqaction cascade_irqaction = {
 	.name = "cascade",
 };
 
-void __init set_irq_trigger_mode(void)
-{
-	/* most bonito irq should be level triggered */
-	LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
-	    LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
-}
-
 void __init mach_init_irq(void)
 {
 	/* init all controller
@@ -59,6 +52,10 @@ void __init mach_init_irq(void)
 	 *   32-63        ------> bonito irq
 	 */
 
+	/* most bonito irq should be level triggered */
+	LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
+	    LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
+
 	/* Sets the first-level interrupt dispatcher. */
 	mips_cpu_irq_init();
 	init_i8259_irqs();
diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c
index 1d8b4d28a05..081db102bb9 100644
--- a/arch/mips/loongson/lemote-2f/irq.c
+++ b/arch/mips/loongson/lemote-2f/irq.c
@@ -19,7 +19,6 @@
 #include <machine.h>
 
 #define LOONGSON_TIMER_IRQ	(MIPS_CPU_IRQ_BASE + 7)	/* cpu timer */
-#define LOONGSON_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* cpu perf counter */
 #define LOONGSON_NORTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 6)	/* bonito */
 #define LOONGSON_UART_IRQ	(MIPS_CPU_IRQ_BASE + 3)	/* cpu serial port */
 #define LOONGSON_SOUTH_BRIDGE_IRQ	(MIPS_CPU_IRQ_BASE + 2)	/* i8259 */
@@ -79,9 +78,7 @@ void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
-		do_IRQ(LOONGSON2_PERFCNT_IRQ);
-#endif
+		do_perfcnt_IRQ();
 		bonito_irqdispatch();
 	} else if (pending & CAUSEF_IP3)	/* CPU UART */
 		do_IRQ(LOONGSON_UART_IRQ);
@@ -91,13 +88,6 @@ void mach_irq_dispatch(unsigned int pending)
 		spurious_interrupt();
 }
 
-void __init set_irq_trigger_mode(void)
-{
-	/* setup cs5536 as high level trigger */
-	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
-	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
-}
-
 static irqreturn_t ip6_action(int cpl, void *dev_id)
 {
 	return IRQ_HANDLED;
@@ -122,6 +112,10 @@ void __init mach_init_irq(void)
 	 *   32-63        ------> bonito irq
 	 */
 
+	/* setup cs5536 as high level trigger */
+	LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
+	LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
+
 	/* Sets the first-level interrupt dispatcher. */
 	mips_cpu_irq_init();
 	init_i8259_irqs();
diff --git a/arch/mips/math-emu/Makefile b/arch/mips/math-emu/Makefile
index d547efdeedc..96607230d9e 100644
--- a/arch/mips/math-emu/Makefile
+++ b/arch/mips/math-emu/Makefile
@@ -10,4 +10,3 @@ obj-y	:= cp1emu.o ieee754m.o ieee754d.o ieee754dp.o ieee754sp.o ieee754.o \
 	   sp_scalb.o sp_simple.o sp_tint.o sp_fint.o sp_tlong.o sp_flong.o \
 	   dp_sqrt.o sp_sqrt.o kernel_linkage.o dsemul.o
 
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/math-emu/dp_modf.c b/arch/mips/math-emu/dp_modf.c
index 25861a42c36..a8570e5c3ef 100644
--- a/arch/mips/math-emu/dp_modf.c
+++ b/arch/mips/math-emu/dp_modf.c
@@ -29,7 +29,7 @@
 
 /* modf function is always exact for a finite number
 */
-ieee754dp ieee754dp_modf(ieee754dp x, ieee754dp * ip)
+ieee754dp ieee754dp_modf(ieee754dp x, ieee754dp *ip)
 {
 	COMPXDP;
 
diff --git a/arch/mips/math-emu/dp_tint.c b/arch/mips/math-emu/dp_tint.c
index 77b2b7ccf28..24478623c11 100644
--- a/arch/mips/math-emu/dp_tint.c
+++ b/arch/mips/math-emu/dp_tint.c
@@ -69,8 +69,7 @@ int ieee754dp_tint(ieee754dp x)
 			round = 0;
 			sticky = residue != 0;
 			xm = 0;
-		}
-		else {
+		} else {
 			residue = xm << (64 - DP_MBITS + xe);
 			round = (residue >> 63) != 0;
 			sticky = (residue << 1) != 0;
diff --git a/arch/mips/math-emu/dp_tlong.c b/arch/mips/math-emu/dp_tlong.c
index d71113e0716..0f07ec2be3f 100644
--- a/arch/mips/math-emu/dp_tlong.c
+++ b/arch/mips/math-emu/dp_tlong.c
@@ -71,8 +71,7 @@ s64 ieee754dp_tlong(ieee754dp x)
 			round = 0;
 			sticky = residue != 0;
 			xm = 0;
-		}
-		else {
+		} else {
 			/* Shifting a u64 64 times does not work,
 			* so we do it in two steps. Be aware that xe
 			* may be -1 */
diff --git a/arch/mips/math-emu/sp_modf.c b/arch/mips/math-emu/sp_modf.c
index 4b1dbac796f..76568946b4c 100644
--- a/arch/mips/math-emu/sp_modf.c
+++ b/arch/mips/math-emu/sp_modf.c
@@ -29,7 +29,7 @@
 
 /* modf function is always exact for a finite number
 */
-ieee754sp ieee754sp_modf(ieee754sp x, ieee754sp * ip)
+ieee754sp ieee754sp_modf(ieee754sp x, ieee754sp *ip)
 {
 	COMPXSP;
 
diff --git a/arch/mips/math-emu/sp_tint.c b/arch/mips/math-emu/sp_tint.c
index 1d73d2abe0b..352dc3a5f1a 100644
--- a/arch/mips/math-emu/sp_tint.c
+++ b/arch/mips/math-emu/sp_tint.c
@@ -72,8 +72,7 @@ int ieee754sp_tint(ieee754sp x)
 			round = 0;
 			sticky = residue != 0;
 			xm = 0;
-		}
-		else {
+		} else {
 			/* Shifting a u32 32 times does not work,
 			* so we do it in two steps. Be aware that xe
 			* may be -1 */
diff --git a/arch/mips/math-emu/sp_tlong.c b/arch/mips/math-emu/sp_tlong.c
index 4be21aa81fb..92cd9c511a1 100644
--- a/arch/mips/math-emu/sp_tlong.c
+++ b/arch/mips/math-emu/sp_tlong.c
@@ -71,8 +71,7 @@ s64 ieee754sp_tlong(ieee754sp x)
 			round = 0;
 			sticky = residue != 0;
 			xm = 0;
-		}
-		else {
+		} else {
 			residue = xm << (32 - SP_MBITS + xe);
 			round = (residue >> 31) != 0;
 			sticky = (residue << 1) != 0;
diff --git a/arch/mips/mipssim/Makefile b/arch/mips/mipssim/Makefile
index 41b96571315..01410a3f172 100644
--- a/arch/mips/mipssim/Makefile
+++ b/arch/mips/mipssim/Makefile
@@ -21,5 +21,3 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o
 
 obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
 obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mipssim/Platform b/arch/mips/mipssim/Platform
new file mode 100644
index 00000000000..3df60b8a12e
--- /dev/null
+++ b/arch/mips/mipssim/Platform
@@ -0,0 +1,6 @@
+#
+# MIPS SIM
+#
+platform-$(CONFIG_MIPS_SIM)	+= mipssim/
+cflags-$(CONFIG_MIPS_SIM)	+= -I$(srctree)/arch/mips/include/asm/mach-mipssim
+load-$(CONFIG_MIPS_SIM)		+= 0x80100000
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index f0e43559970..d679c772d08 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -34,5 +34,3 @@ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
 obj-$(CONFIG_RM7000_CPU_SCACHE)	+= sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index b78f7d913ca..783ad0065fd 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -16,8 +16,8 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/vt_kern.h>		/* For unblank_screen() */
 #include <linux/module.h>
+#include <linux/kprobes.h>
 
 #include <asm/branch.h>
 #include <asm/mmu_context.h>
@@ -25,13 +25,14 @@
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
 #include <asm/highmem.h>		/* For VMALLOC_END */
+#include <linux/kdebug.h>
 
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
  * routines.
  */
-asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long write,
 			      unsigned long address)
 {
 	struct vm_area_struct * vma = NULL;
@@ -47,6 +48,17 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
 	       field, regs->cp0_epc);
 #endif
 
+#ifdef CONFIG_KPROBES
+	/*
+	 * This is to notify the fault handler of the kprobes.  The
+	 * exception code is redundant as it is also carried in REGS,
+	 * but we pass it anyhow.
+	 */
+	if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1,
+		       (regs->cp0_cause >> 2) & 0x1f, SIGSEGV) == NOTIFY_STOP)
+		return;
+#endif
+
 	info.si_code = SEGV_MAPERR;
 
 	/*
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 127d732474b..6a2b1bf9ef1 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -64,7 +64,7 @@ void *__kmap_atomic(struct page *page, enum km_type type)
 }
 EXPORT_SYMBOL(__kmap_atomic);
 
-void __kunmap_atomic(void *kvaddr, enum km_type type)
+void __kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 #ifdef CONFIG_DEBUG_HIGHMEM
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
@@ -87,7 +87,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
-EXPORT_SYMBOL(__kunmap_atomic);
+EXPORT_SYMBOL(__kunmap_atomic_notypecheck);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index de69bfbf506..1ef75cd80a0 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -16,6 +16,7 @@
 #include <asm/cacheops.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
+#include <asm/sections.h>
 #include <asm/cacheflush.h> /* for run_uncached() */
 
 /* Primary cache parameters. */
@@ -25,11 +26,15 @@
 /* Secondary cache parameters. */
 #define scache_size	(256*1024)	/* Fixed to 256KiB on RM7000 */
 
+/* Tertiary cache parameters */
+#define tc_lsize	32
+
 extern unsigned long icache_way_size, dcache_way_size;
+unsigned long tcache_size;
 
 #include <asm/r4kcache.h>
 
-static int rm7k_tcache_enabled;
+static int rm7k_tcache_init;
 
 /*
  * Writeback and invalidate the primary cache dcache before DMA.
@@ -46,7 +51,7 @@ static void rm7k_sc_wback_inv(unsigned long addr, unsigned long size)
 
 	blast_scache_range(addr, addr + size);
 
-	if (!rm7k_tcache_enabled)
+	if (!rm7k_tcache_init)
 		return;
 
 	a = addr & ~(tc_pagesize - 1);
@@ -70,7 +75,7 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
 
 	blast_inv_scache_range(addr, addr + size);
 
-	if (!rm7k_tcache_enabled)
+	if (!rm7k_tcache_init)
 		return;
 
 	a = addr & ~(tc_pagesize - 1);
@@ -83,6 +88,45 @@ static void rm7k_sc_inv(unsigned long addr, unsigned long size)
 	}
 }
 
+static void blast_rm7k_tcache(void)
+{
+	unsigned long start = CKSEG0ADDR(0);
+	unsigned long end = start + tcache_size;
+
+	write_c0_taglo(0);
+
+	while (start < end) {
+		cache_op(Page_Invalidate_T, start);
+		start += tc_pagesize;
+	}
+}
+
+/*
+ * This function is executed in uncached address space.
+ */
+static __cpuinit void __rm7k_tc_enable(void)
+{
+	int i;
+
+	set_c0_config(RM7K_CONF_TE);
+
+	write_c0_taglo(0);
+	write_c0_taghi(0);
+
+	for (i = 0; i < tcache_size; i += tc_lsize)
+		cache_op(Index_Store_Tag_T, CKSEG0ADDR(i));
+}
+
+static __cpuinit void rm7k_tc_enable(void)
+{
+	if (read_c0_config() & RM7K_CONF_TE)
+		return;
+
+	BUG_ON(tcache_size == 0);
+
+	run_uncached(__rm7k_tc_enable);
+}
+
 /*
  * This function is executed in uncached address space.
  */
@@ -95,16 +139,8 @@ static __cpuinit void __rm7k_sc_enable(void)
 	write_c0_taglo(0);
 	write_c0_taghi(0);
 
-	for (i = 0; i < scache_size; i += sc_lsize) {
-		__asm__ __volatile__ (
-		      ".set noreorder\n\t"
-		      ".set mips3\n\t"
-		      "cache %1, (%0)\n\t"
-		      ".set mips0\n\t"
-		      ".set reorder"
-		      :
-		      : "r" (CKSEG0ADDR(i)), "i" (Index_Store_Tag_SD));
-	}
+	for (i = 0; i < scache_size; i += sc_lsize)
+		cache_op(Index_Store_Tag_SD, CKSEG0ADDR(i));
 }
 
 static __cpuinit void rm7k_sc_enable(void)
@@ -112,13 +148,29 @@ static __cpuinit void rm7k_sc_enable(void)
 	if (read_c0_config() & RM7K_CONF_SE)
 		return;
 
-	printk(KERN_INFO "Enabling secondary cache...\n");
+	pr_info("Enabling secondary cache...\n");
 	run_uncached(__rm7k_sc_enable);
+
+	if (rm7k_tcache_init)
+		rm7k_tc_enable();
+}
+
+static void rm7k_tc_disable(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	blast_rm7k_tcache();
+	clear_c0_config(RM7K_CONF_TE);
+	local_irq_save(flags);
 }
 
 static void rm7k_sc_disable(void)
 {
 	clear_c0_config(RM7K_CONF_SE);
+
+	if (rm7k_tcache_init)
+		rm7k_tc_disable();
 }
 
 static struct bcache_ops rm7k_sc_ops = {
@@ -128,6 +180,52 @@ static struct bcache_ops rm7k_sc_ops = {
 	.bc_inv = rm7k_sc_inv
 };
 
+/*
+ * This is a probing function like the one found in c-r4k.c, we look for the
+ * wrap around point with different addresses.
+ */
+static __cpuinit void __probe_tcache(void)
+{
+	unsigned long flags, addr, begin, end, pow2;
+
+	begin = (unsigned long) &_stext;
+	begin  &= ~((8 * 1024 * 1024) - 1);
+	end = begin + (8 * 1024 * 1024);
+
+	local_irq_save(flags);
+
+	set_c0_config(RM7K_CONF_TE);
+
+	/* Fill size-multiple lines with a valid tag */
+	pow2 = (256 * 1024);
+	for (addr = begin; addr <= end; addr = (begin + pow2)) {
+		unsigned long *p = (unsigned long *) addr;
+		__asm__ __volatile__("nop" : : "r" (*p));
+		pow2 <<= 1;
+	}
+
+	/* Load first line with a 0 tag, to check after */
+	write_c0_taglo(0);
+	write_c0_taghi(0);
+	cache_op(Index_Store_Tag_T, begin);
+
+	/* Look for the wrap-around */
+	pow2 = (512 * 1024);
+	for (addr = begin + (512 * 1024); addr <= end; addr = begin + pow2) {
+		cache_op(Index_Load_Tag_T, addr);
+		if (!read_c0_taglo())
+			break;
+		pow2 <<= 1;
+	}
+
+	addr -= begin;
+	tcache_size = addr;
+
+	clear_c0_config(RM7K_CONF_TE);
+
+	local_irq_restore(flags);
+}
+
 void __cpuinit rm7k_sc_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -147,27 +245,26 @@ void __cpuinit rm7k_sc_init(void)
 	if (!(config & RM7K_CONF_SE))
 		rm7k_sc_enable();
 
+	bcops = &rm7k_sc_ops;
+
 	/*
 	 * While we're at it let's deal with the tertiary cache.
 	 */
-	if (!(config & RM7K_CONF_TC)) {
-
-		/*
-		 * We can't enable the L3 cache yet. There may be board-specific
-		 * magic necessary to turn it on, and blindly asking the CPU to
-		 * start using it would may give cache errors.
-		 *
-		 * Also, board-specific knowledge may allow us to use the
-		 * CACHE Flash_Invalidate_T instruction if the tag RAM supports
-		 * it, and may specify the size of the L3 cache so we don't have
-		 * to probe it.
-		 */
-		printk(KERN_INFO "Tertiary cache present, %s enabled\n",
-		       (config & RM7K_CONF_TE) ? "already" : "not (yet)");
-
-		if ((config & RM7K_CONF_TE))
-			rm7k_tcache_enabled = 1;
-	}
 
-	bcops = &rm7k_sc_ops;
+	rm7k_tcache_init = 0;
+	tcache_size = 0;
+
+	if (config & RM7K_CONF_TC)
+		return;
+
+	/*
+	 * No efficient way to ask the hardware for the size of the tcache,
+	 * so must probe for it.
+	 */
+	run_uncached(__probe_tcache);
+	rm7k_tc_enable();
+	rm7k_tcache_init = 1;
+	c->tcache.linesz = tc_lsize;
+	c->tcache.ways = 1;
+	pr_info("Tertiary cache size %ldK.\n", (tcache_size >> 10));
 }
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 86f004dc835..4510e61883e 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -409,6 +409,11 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 		tlbw(p);
 		break;
 
+	case CPU_JZRISC:
+		tlbw(p);
+		uasm_i_nop(p);
+		break;
+
 	default:
 		panic("No TLB refill handler yet (CPU type: %d)",
 		      current_cpu_data.cputype);
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 611d564fdcf..d2647a4e012 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -62,12 +62,13 @@ enum opcode {
 	insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl,
 	insn_bne, insn_cache, insn_daddu, insn_daddiu, insn_dmfc0,
 	insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
-	insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
-	insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
-	insn_mtc0, insn_or, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
-	insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw,
-	insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
-	insn_dins, insn_syscall
+	insn_dsrl32, insn_drotr, insn_drotr32, insn_dsubu, insn_eret,
+	insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld,
+	insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_or, insn_ori,
+	insn_pref, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll,
+	insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw, insn_tlbp,
+	insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
+	insn_dins, insn_syscall, insn_bbit0, insn_bbit1
 };
 
 struct insn {
@@ -85,7 +86,7 @@ struct insn {
 	 | (e) << RE_SH						\
 	 | (f) << FUNC_SH)
 
-static struct insn insn_table[] __cpuinitdata = {
+static struct insn insn_table[] __uasminitdata = {
 	{ insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
 	{ insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
 	{ insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
@@ -108,6 +109,7 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_dsrl, M(spec_op, 0, 0, 0, 0, dsrl_op), RT | RD | RE },
 	{ insn_dsrl32, M(spec_op, 0, 0, 0, 0, dsrl32_op), RT | RD | RE },
 	{ insn_drotr, M(spec_op, 1, 0, 0, 0, dsrl_op), RT | RD | RE },
+	{ insn_drotr32, M(spec_op, 1, 0, 0, 0, dsrl32_op), RT | RD | RE },
 	{ insn_dsubu, M(spec_op, 0, 0, 0, 0, dsubu_op), RS | RT | RD },
 	{ insn_eret,  M(cop0_op, cop_op, 0, 0, 0, eret_op),  0 },
 	{ insn_j,  M(j_op, 0, 0, 0, 0, 0),  JIMM },
@@ -141,12 +143,14 @@ static struct insn insn_table[] __cpuinitdata = {
 	{ insn_xori,  M(xori_op, 0, 0, 0, 0, 0),  RS | RT | UIMM },
 	{ insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
 	{ insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
+	{ insn_bbit0, M(lwc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
+	{ insn_bbit1, M(swc2_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
 	{ insn_invalid, 0, 0 }
 };
 
 #undef M
 
-static inline __cpuinit u32 build_rs(u32 arg)
+static inline __uasminit u32 build_rs(u32 arg)
 {
 	if (arg & ~RS_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -154,7 +158,7 @@ static inline __cpuinit u32 build_rs(u32 arg)
 	return (arg & RS_MASK) << RS_SH;
 }
 
-static inline __cpuinit u32 build_rt(u32 arg)
+static inline __uasminit u32 build_rt(u32 arg)
 {
 	if (arg & ~RT_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -162,7 +166,7 @@ static inline __cpuinit u32 build_rt(u32 arg)
 	return (arg & RT_MASK) << RT_SH;
 }
 
-static inline __cpuinit u32 build_rd(u32 arg)
+static inline __uasminit u32 build_rd(u32 arg)
 {
 	if (arg & ~RD_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -170,7 +174,7 @@ static inline __cpuinit u32 build_rd(u32 arg)
 	return (arg & RD_MASK) << RD_SH;
 }
 
-static inline __cpuinit u32 build_re(u32 arg)
+static inline __uasminit u32 build_re(u32 arg)
 {
 	if (arg & ~RE_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -178,7 +182,7 @@ static inline __cpuinit u32 build_re(u32 arg)
 	return (arg & RE_MASK) << RE_SH;
 }
 
-static inline __cpuinit u32 build_simm(s32 arg)
+static inline __uasminit u32 build_simm(s32 arg)
 {
 	if (arg > 0x7fff || arg < -0x8000)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -186,7 +190,7 @@ static inline __cpuinit u32 build_simm(s32 arg)
 	return arg & 0xffff;
 }
 
-static inline __cpuinit u32 build_uimm(u32 arg)
+static inline __uasminit u32 build_uimm(u32 arg)
 {
 	if (arg & ~IMM_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -194,7 +198,7 @@ static inline __cpuinit u32 build_uimm(u32 arg)
 	return arg & IMM_MASK;
 }
 
-static inline __cpuinit u32 build_bimm(s32 arg)
+static inline __uasminit u32 build_bimm(s32 arg)
 {
 	if (arg > 0x1ffff || arg < -0x20000)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -205,7 +209,7 @@ static inline __cpuinit u32 build_bimm(s32 arg)
 	return ((arg < 0) ? (1 << 15) : 0) | ((arg >> 2) & 0x7fff);
 }
 
-static inline __cpuinit u32 build_jimm(u32 arg)
+static inline __uasminit u32 build_jimm(u32 arg)
 {
 	if (arg & ~((JIMM_MASK) << 2))
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -213,7 +217,7 @@ static inline __cpuinit u32 build_jimm(u32 arg)
 	return (arg >> 2) & JIMM_MASK;
 }
 
-static inline __cpuinit u32 build_scimm(u32 arg)
+static inline __uasminit u32 build_scimm(u32 arg)
 {
 	if (arg & ~SCIMM_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -221,7 +225,7 @@ static inline __cpuinit u32 build_scimm(u32 arg)
 	return (arg & SCIMM_MASK) << SCIMM_SH;
 }
 
-static inline __cpuinit u32 build_func(u32 arg)
+static inline __uasminit u32 build_func(u32 arg)
 {
 	if (arg & ~FUNC_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -229,7 +233,7 @@ static inline __cpuinit u32 build_func(u32 arg)
 	return arg & FUNC_MASK;
 }
 
-static inline __cpuinit u32 build_set(u32 arg)
+static inline __uasminit u32 build_set(u32 arg)
 {
 	if (arg & ~SET_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -241,7 +245,7 @@ static inline __cpuinit u32 build_set(u32 arg)
  * The order of opcode arguments is implicitly left to right,
  * starting with RS and ending with FUNC or IMM.
  */
-static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...)
+static void __uasminit build_insn(u32 **buf, enum opcode opc, ...)
 {
 	struct insn *ip = NULL;
 	unsigned int i;
@@ -291,67 +295,78 @@ static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...)
 Ip_u1u2u3(op)						\
 {							\
 	build_insn(buf, insn##op, a, b, c);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u2u1u3(op)					\
 Ip_u2u1u3(op)						\
 {							\
 	build_insn(buf, insn##op, b, a, c);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u3u1u2(op)					\
 Ip_u3u1u2(op)						\
 {							\
 	build_insn(buf, insn##op, b, c, a);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u1u2s3(op)					\
 Ip_u1u2s3(op)						\
 {							\
 	build_insn(buf, insn##op, a, b, c);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u2s3u1(op)					\
 Ip_u2s3u1(op)						\
 {							\
 	build_insn(buf, insn##op, c, a, b);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u2u1s3(op)					\
 Ip_u2u1s3(op)						\
 {							\
 	build_insn(buf, insn##op, b, a, c);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u2u1msbu3(op)					\
 Ip_u2u1msbu3(op)					\
 {							\
 	build_insn(buf, insn##op, b, a, c+d-1, c);	\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u1u2(op)					\
 Ip_u1u2(op)						\
 {							\
 	build_insn(buf, insn##op, a, b);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u1s2(op)					\
 Ip_u1s2(op)						\
 {							\
 	build_insn(buf, insn##op, a, b);		\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_u1(op)					\
 Ip_u1(op)						\
 {							\
 	build_insn(buf, insn##op, a);			\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 #define I_0(op)						\
 Ip_0(op)						\
 {							\
 	build_insn(buf, insn##op);			\
-}
+}							\
+UASM_EXPORT_SYMBOL(uasm_i##op);
 
 I_u2u1s3(_addiu)
 I_u3u1u2(_addu)
@@ -375,6 +390,7 @@ I_u2u1u3(_dsra)
 I_u2u1u3(_dsrl)
 I_u2u1u3(_dsrl32)
 I_u2u1u3(_drotr)
+I_u2u1u3(_drotr32)
 I_u3u1u2(_dsubu)
 I_0(_eret)
 I_u1(_j)
@@ -408,16 +424,19 @@ I_u3u1u2(_xor)
 I_u2u1u3(_xori)
 I_u2u1msbu3(_dins);
 I_u1(_syscall);
+I_u1u2s3(_bbit0);
+I_u1u2s3(_bbit1);
 
 /* Handle labels. */
-void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
+void __uasminit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
 {
 	(*lab)->addr = addr;
 	(*lab)->lab = lid;
 	(*lab)++;
 }
+UASM_EXPORT_SYMBOL(uasm_build_label);
 
-int __cpuinit uasm_in_compat_space_p(long addr)
+int __uasminit uasm_in_compat_space_p(long addr)
 {
 	/* Is this address in 32bit compat space? */
 #ifdef CONFIG_64BIT
@@ -426,8 +445,9 @@ int __cpuinit uasm_in_compat_space_p(long addr)
 	return 1;
 #endif
 }
+UASM_EXPORT_SYMBOL(uasm_in_compat_space_p);
 
-static int __cpuinit uasm_rel_highest(long val)
+static int __uasminit uasm_rel_highest(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
@@ -436,7 +456,7 @@ static int __cpuinit uasm_rel_highest(long val)
 #endif
 }
 
-static int __cpuinit uasm_rel_higher(long val)
+static int __uasminit uasm_rel_higher(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
@@ -445,17 +465,19 @@ static int __cpuinit uasm_rel_higher(long val)
 #endif
 }
 
-int __cpuinit uasm_rel_hi(long val)
+int __uasminit uasm_rel_hi(long val)
 {
 	return ((((val + 0x8000L) >> 16) & 0xffff) ^ 0x8000) - 0x8000;
 }
+UASM_EXPORT_SYMBOL(uasm_rel_hi);
 
-int __cpuinit uasm_rel_lo(long val)
+int __uasminit uasm_rel_lo(long val)
 {
 	return ((val & 0xffff) ^ 0x8000) - 0x8000;
 }
+UASM_EXPORT_SYMBOL(uasm_rel_lo);
 
-void __cpuinit UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
+void __uasminit UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
 {
 	if (!uasm_in_compat_space_p(addr)) {
 		uasm_i_lui(buf, rs, uasm_rel_highest(addr));
@@ -470,8 +492,9 @@ void __cpuinit UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
 	} else
 		uasm_i_lui(buf, rs, uasm_rel_hi(addr));
 }
+UASM_EXPORT_SYMBOL(UASM_i_LA_mostly);
 
-void __cpuinit UASM_i_LA(u32 **buf, unsigned int rs, long addr)
+void __uasminit UASM_i_LA(u32 **buf, unsigned int rs, long addr)
 {
 	UASM_i_LA_mostly(buf, rs, addr);
 	if (uasm_rel_lo(addr)) {
@@ -481,9 +504,10 @@ void __cpuinit UASM_i_LA(u32 **buf, unsigned int rs, long addr)
 			uasm_i_addiu(buf, rs, rs, uasm_rel_lo(addr));
 	}
 }
+UASM_EXPORT_SYMBOL(UASM_i_LA);
 
 /* Handle relocations. */
-void __cpuinit
+void __uasminit
 uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid)
 {
 	(*rel)->addr = addr;
@@ -491,8 +515,9 @@ uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid)
 	(*rel)->lab = lid;
 	(*rel)++;
 }
+UASM_EXPORT_SYMBOL(uasm_r_mips_pc16);
 
-static inline void __cpuinit
+static inline void __uasminit
 __resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 {
 	long laddr = (long)lab->addr;
@@ -509,7 +534,7 @@ __resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 	}
 }
 
-void __cpuinit
+void __uasminit
 uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 {
 	struct uasm_label *l;
@@ -519,24 +544,27 @@ uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 			if (rel->lab == l->lab)
 				__resolve_relocs(rel, l);
 }
+UASM_EXPORT_SYMBOL(uasm_resolve_relocs);
 
-void __cpuinit
+void __uasminit
 uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off)
 {
 	for (; rel->lab != UASM_LABEL_INVALID; rel++)
 		if (rel->addr >= first && rel->addr < end)
 			rel->addr += off;
 }
+UASM_EXPORT_SYMBOL(uasm_move_relocs);
 
-void __cpuinit
+void __uasminit
 uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off)
 {
 	for (; lab->lab != UASM_LABEL_INVALID; lab++)
 		if (lab->addr >= first && lab->addr < end)
 			lab->addr += off;
 }
+UASM_EXPORT_SYMBOL(uasm_move_labels);
 
-void __cpuinit
+void __uasminit
 uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
 		  u32 *end, u32 *target)
 {
@@ -547,8 +575,9 @@ uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
 	uasm_move_relocs(rel, first, end, off);
 	uasm_move_labels(lab, first, end, off);
 }
+UASM_EXPORT_SYMBOL(uasm_copy_handler);
 
-int __cpuinit uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
+int __uasminit uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
 {
 	for (; rel->lab != UASM_LABEL_INVALID; rel++) {
 		if (rel->addr == addr
@@ -559,61 +588,88 @@ int __cpuinit uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
 
 	return 0;
 }
+UASM_EXPORT_SYMBOL(uasm_insn_has_bdelay);
 
 /* Convenience functions for labeled branches. */
-void __cpuinit
+void __uasminit
 uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bltz(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_bltz);
 
-void __cpuinit
+void __uasminit
 uasm_il_b(u32 **p, struct uasm_reloc **r, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_b(p, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_b);
 
-void __cpuinit
+void __uasminit
 uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_beqz(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_beqz);
 
-void __cpuinit
+void __uasminit
 uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_beqzl(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_beqzl);
 
-void __cpuinit
+void __uasminit
 uasm_il_bne(u32 **p, struct uasm_reloc **r, unsigned int reg1,
 	unsigned int reg2, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bne(p, reg1, reg2, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_bne);
 
-void __cpuinit
+void __uasminit
 uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bnez(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_bnez);
 
-void __cpuinit
+void __uasminit
 uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bgezl(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_bgezl);
 
-void __cpuinit
+void __uasminit
 uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bgez(p, reg, 0);
 }
+UASM_EXPORT_SYMBOL(uasm_il_bgez);
+
+void __uasminit
+uasm_il_bbit0(u32 **p, struct uasm_reloc **r, unsigned int reg,
+	      unsigned int bit, int lid)
+{
+	uasm_r_mips_pc16(r, *p, lid);
+	uasm_i_bbit0(p, reg, bit, 0);
+}
+UASM_EXPORT_SYMBOL(uasm_il_bbit0);
+
+void __uasminit
+uasm_il_bbit1(u32 **p, struct uasm_reloc **r, unsigned int reg,
+	      unsigned int bit, int lid)
+{
+	uasm_r_mips_pc16(r, *p, lid);
+	uasm_i_bbit1(p, reg, bit, 0);
+}
+UASM_EXPORT_SYMBOL(uasm_il_bbit1);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index 32e847808df..6079ef33b5f 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -15,5 +15,3 @@ obj-$(CONFIG_PCI)		+= malta-pci.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta-smtc.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mti-malta/Platform b/arch/mips/mti-malta/Platform
new file mode 100644
index 00000000000..5b548b5a4fc
--- /dev/null
+++ b/arch/mips/mti-malta/Platform
@@ -0,0 +1,7 @@
+#
+# MIPS Malta board
+#
+platform-$(CONFIG_MIPS_MALTA)	+= mti-malta/
+cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
+load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
+all-$(CONFIG_MIPS_MALTA)	:= $(COMPRESSION_FNAME).bin
diff --git a/arch/mips/nxp/pnx833x/stb22x/Makefile b/arch/mips/nxp/pnx833x/stb22x/Makefile
deleted file mode 100644
index f81c5801f45..00000000000
--- a/arch/mips/nxp/pnx833x/stb22x/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-lib-y := board.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/jbs/Makefile b/arch/mips/nxp/pnx8550/jbs/Makefile
deleted file mode 100644
index ad6a8ca7d8c..00000000000
--- a/arch/mips/nxp/pnx8550/jbs/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-
-# Makefile for the NXP JBS Board.
-
-lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/nxp/pnx8550/stb810/Makefile b/arch/mips/nxp/pnx8550/stb810/Makefile
deleted file mode 100644
index ab91d72c566..00000000000
--- a/arch/mips/nxp/pnx8550/stb810/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-
-# Makefile for the NXP STB810 Board.
-
-lib-y := prom_init.o board_setup.o irqmap.o
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 03742e64765..d8080499872 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2005-2009 Cavium Networks
+ * Copyright (C) 2005-2009, 2010 Cavium Networks
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -22,7 +22,7 @@
  * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is
  * in use.
  */
-static uint64_t msi_free_irq_bitmask;
+static u64 msi_free_irq_bitmask[4];
 
 /*
  * Each bit in msi_multiple_irq_bitmask tells that the device using
@@ -30,7 +30,7 @@ static uint64_t msi_free_irq_bitmask;
  * is used so we can disable all of the MSI interrupts when a device
  * uses multiple.
  */
-static uint64_t msi_multiple_irq_bitmask;
+static u64 msi_multiple_irq_bitmask[4];
 
 /*
  * This lock controls updates to msi_free_irq_bitmask and
@@ -38,6 +38,11 @@ static uint64_t msi_multiple_irq_bitmask;
  */
 static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
 
+/*
+ * Number of MSI IRQs used. This variable is set up in
+ * the module init time.
+ */
+static int msi_irq_size;
 
 /**
  * Called when a driver request MSI interrupts instead of the
@@ -54,12 +59,13 @@ static DEFINE_SPINLOCK(msi_free_irq_bitmask_lock);
 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
-	uint16_t control;
+	u16 control;
 	int configured_private_bits;
 	int request_private_bits;
-	int irq;
+	int irq = 0;
 	int irq_step;
-	uint64_t search_mask;
+	u64 search_mask;
+	int index;
 
 	/*
 	 * Read the MSI config to figure out how many IRQs this device
@@ -111,29 +117,31 @@ try_only_one:
 	 * use.
 	 */
 	spin_lock(&msi_free_irq_bitmask_lock);
-	for (irq = 0; irq < 64; irq += irq_step) {
-		if ((msi_free_irq_bitmask & (search_mask << irq)) == 0) {
-			msi_free_irq_bitmask |= search_mask << irq;
-			msi_multiple_irq_bitmask |= (search_mask >> 1) << irq;
-			break;
+	for (index = 0; index < msi_irq_size/64; index++) {
+		for (irq = 0; irq < 64; irq += irq_step) {
+			if ((msi_free_irq_bitmask[index] & (search_mask << irq)) == 0) {
+				msi_free_irq_bitmask[index] |= search_mask << irq;
+				msi_multiple_irq_bitmask[index] |= (search_mask >> 1) << irq;
+				goto msi_irq_allocated;
+			}
 		}
 	}
+msi_irq_allocated:
 	spin_unlock(&msi_free_irq_bitmask_lock);
 
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free "
-			       "interrupts, trying just one",
+			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI "
-			      "interrupt");
+			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
+	irq += index*64;
 	irq += OCTEON_IRQ_MSI_BIT0;
 
 	switch (octeon_dma_bar_type) {
@@ -169,6 +177,34 @@ try_only_one:
 	return 0;
 }
 
+int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+	struct msi_desc *entry;
+	int ret;
+
+	/*
+	 * MSI-X is not supported.
+	 */
+	if (type == PCI_CAP_ID_MSIX)
+		return -EINVAL;
+
+	/*
+	 * If an architecture wants to support multiple MSI, it needs to
+	 * override arch_setup_msi_irqs()
+	 */
+	if (type == PCI_CAP_ID_MSI && nvec > 1)
+		return 1;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		ret = arch_setup_msi_irq(dev, entry);
+		if (ret < 0)
+			return ret;
+		if (ret > 0)
+			return -ENOSPC;
+	}
+
+	return 0;
+}
 
 /**
  * Called when a device no longer needs its MSI interrupts. All
@@ -179,12 +215,18 @@ try_only_one:
 void arch_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
-	uint64_t bitmask;
+	u64 bitmask;
+	int index = 0;
+	int irq0;
 
-	if ((irq < OCTEON_IRQ_MSI_BIT0) || (irq > OCTEON_IRQ_MSI_BIT63))
+	if ((irq < OCTEON_IRQ_MSI_BIT0)
+		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
 		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
 		      "MSI interrupt (%d)", irq);
+
 	irq -= OCTEON_IRQ_MSI_BIT0;
+	index = irq / 64;
+	irq0 = irq % 64;
 
 	/*
 	 * Count the number of IRQs we need to free by looking at the
@@ -192,97 +234,198 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 * IRQ is also owned by this device.
 	 */
 	number_irqs = 0;
-	while ((irq+number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask & (1ull << (irq + number_irqs))))
+	while ((irq0 + number_irqs < 64) &&
+	       (msi_multiple_irq_bitmask[index]
+		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
 	/* Mask with one bit for each IRQ */
 	bitmask = (1 << number_irqs) - 1;
 	/* Shift the mask to the correct bit location */
-	bitmask <<= irq;
-	if ((msi_free_irq_bitmask & bitmask) != bitmask)
+	bitmask <<= irq0;
+	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
 		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
 		      "interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
-	msi_free_irq_bitmask &= ~bitmask;
-	msi_multiple_irq_bitmask &= ~bitmask;
+	msi_free_irq_bitmask[index] &= ~bitmask;
+	msi_multiple_irq_bitmask[index] &= ~bitmask;
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
+
+static u64 msi_rcv_reg[4];
+static u64 mis_ena_reg[4];
+
+static void octeon_irq_msi_enable_pcie(unsigned int irq)
+{
+	u64 en;
+	unsigned long flags;
+	int msi_number = irq - OCTEON_IRQ_MSI_BIT0;
+	int irq_index = msi_number >> 6;
+	int irq_bit = msi_number & 0x3f;
+
+	raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+	en = cvmx_read_csr(mis_ena_reg[irq_index]);
+	en |= 1ull << irq_bit;
+	cvmx_write_csr(mis_ena_reg[irq_index], en);
+	cvmx_read_csr(mis_ena_reg[irq_index]);
+	raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+}
+
+static void octeon_irq_msi_disable_pcie(unsigned int irq)
+{
+	u64 en;
+	unsigned long flags;
+	int msi_number = irq - OCTEON_IRQ_MSI_BIT0;
+	int irq_index = msi_number >> 6;
+	int irq_bit = msi_number & 0x3f;
+
+	raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+	en = cvmx_read_csr(mis_ena_reg[irq_index]);
+	en &= ~(1ull << irq_bit);
+	cvmx_write_csr(mis_ena_reg[irq_index], en);
+	cvmx_read_csr(mis_ena_reg[irq_index]);
+	raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+}
+
+static struct irq_chip octeon_irq_chip_msi_pcie = {
+	.name = "MSI",
+	.enable = octeon_irq_msi_enable_pcie,
+	.disable = octeon_irq_msi_disable_pcie,
+};
+
+static void octeon_irq_msi_enable_pci(unsigned int irq)
+{
+	/*
+	 * Octeon PCI doesn't have the ability to mask/unmask MSI
+	 * interrupts individually. Instead of masking/unmasking them
+	 * in groups of 16, we simple assume MSI devices are well
+	 * behaved. MSI interrupts are always enable and the ACK is
+	 * assumed to be enough
+	 */
+}
+
+static void octeon_irq_msi_disable_pci(unsigned int irq)
+{
+	/* See comment in enable */
+}
+
+static struct irq_chip octeon_irq_chip_msi_pci = {
+	.name = "MSI",
+	.enable = octeon_irq_msi_enable_pci,
+	.disable = octeon_irq_msi_disable_pci,
+};
 
 /*
  * Called by the interrupt handling code when an MSI interrupt
  * occurs.
  */
-static irqreturn_t octeon_msi_interrupt(int cpl, void *dev_id)
+static irqreturn_t __octeon_msi_do_interrupt(int index, u64 msi_bits)
 {
-	uint64_t msi_bits;
 	int irq;
+	int bit;
 
-	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE)
-		msi_bits = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_RCV0);
-	else
-		msi_bits = cvmx_read_csr(CVMX_NPI_NPI_MSI_RCV);
-	irq = fls64(msi_bits);
-	if (irq) {
-		irq += OCTEON_IRQ_MSI_BIT0 - 1;
-		if (irq_desc[irq].action) {
-			do_IRQ(irq);
-			return IRQ_HANDLED;
-		} else {
-			pr_err("Spurious MSI interrupt %d\n", irq);
-			if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-				/* These chips have PCIe */
-				cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
-					       1ull << (irq -
-							OCTEON_IRQ_MSI_BIT0));
-			} else {
-				/* These chips have PCI */
-				cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
-					       1ull << (irq -
-							OCTEON_IRQ_MSI_BIT0));
-			}
-		}
+	bit = fls64(msi_bits);
+	if (bit) {
+		bit--;
+		/* Acknowledge it first. */
+		cvmx_write_csr(msi_rcv_reg[index], 1ull << bit);
+
+		irq = bit + OCTEON_IRQ_MSI_BIT0 + 64 * index;
+		do_IRQ(irq);
+		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
 }
 
+#define OCTEON_MSI_INT_HANDLER_X(x)					\
+static irqreturn_t octeon_msi_interrupt##x(int cpl, void *dev_id)	\
+{									\
+	u64 msi_bits = cvmx_read_csr(msi_rcv_reg[(x)]);			\
+	return __octeon_msi_do_interrupt((x), msi_bits);		\
+}
+
+/*
+ * Create octeon_msi_interrupt{0-3} function body
+ */
+OCTEON_MSI_INT_HANDLER_X(0);
+OCTEON_MSI_INT_HANDLER_X(1);
+OCTEON_MSI_INT_HANDLER_X(2);
+OCTEON_MSI_INT_HANDLER_X(3);
 
 /*
  * Initializes the MSI interrupt handling code
  */
-int octeon_msi_initialize(void)
+int __init octeon_msi_initialize(void)
 {
+	int irq;
+	struct irq_chip *msi;
+
+	if (octeon_dma_bar_type == OCTEON_DMA_BAR_TYPE_PCIE) {
+		msi_rcv_reg[0] = CVMX_PEXP_NPEI_MSI_RCV0;
+		msi_rcv_reg[1] = CVMX_PEXP_NPEI_MSI_RCV1;
+		msi_rcv_reg[2] = CVMX_PEXP_NPEI_MSI_RCV2;
+		msi_rcv_reg[3] = CVMX_PEXP_NPEI_MSI_RCV3;
+		mis_ena_reg[0] = CVMX_PEXP_NPEI_MSI_ENB0;
+		mis_ena_reg[1] = CVMX_PEXP_NPEI_MSI_ENB1;
+		mis_ena_reg[2] = CVMX_PEXP_NPEI_MSI_ENB2;
+		mis_ena_reg[3] = CVMX_PEXP_NPEI_MSI_ENB3;
+		msi = &octeon_irq_chip_msi_pcie;
+	} else {
+		msi_rcv_reg[0] = CVMX_NPI_NPI_MSI_RCV;
+#define INVALID_GENERATE_ADE 0x8700000000000000ULL;
+		msi_rcv_reg[1] = INVALID_GENERATE_ADE;
+		msi_rcv_reg[2] = INVALID_GENERATE_ADE;
+		msi_rcv_reg[3] = INVALID_GENERATE_ADE;
+		mis_ena_reg[0] = INVALID_GENERATE_ADE;
+		mis_ena_reg[1] = INVALID_GENERATE_ADE;
+		mis_ena_reg[2] = INVALID_GENERATE_ADE;
+		mis_ena_reg[3] = INVALID_GENERATE_ADE;
+		msi = &octeon_irq_chip_msi_pci;
+	}
+
+	for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_LAST; irq++)
+		set_irq_chip_and_handler(irq, msi, handle_simple_irq);
+
 	if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
-		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[0:63]", octeon_msi_interrupt))
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0,
+				0, "MSI[0:63]", octeon_msi_interrupt0))
 			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt1,
+				0, "MSI[64:127]", octeon_msi_interrupt1))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt2,
+				0, "MSI[127:191]", octeon_msi_interrupt2))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
+
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt3,
+				0, "MSI[192:255]", octeon_msi_interrupt3))
+			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
+
+		msi_irq_size = 256;
 	} else if (octeon_is_pci_host()) {
-		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[0:15]", octeon_msi_interrupt))
+		if (request_irq(OCTEON_IRQ_PCI_MSI0, octeon_msi_interrupt0,
+				0, "MSI[0:15]", octeon_msi_interrupt0))
 			panic("request_irq(OCTEON_IRQ_PCI_MSI0) failed");
 
-		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[16:31]", octeon_msi_interrupt))
+		if (request_irq(OCTEON_IRQ_PCI_MSI1, octeon_msi_interrupt0,
+				0, "MSI[16:31]", octeon_msi_interrupt0))
 			panic("request_irq(OCTEON_IRQ_PCI_MSI1) failed");
 
-		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[32:47]", octeon_msi_interrupt))
+		if (request_irq(OCTEON_IRQ_PCI_MSI2, octeon_msi_interrupt0,
+				0, "MSI[32:47]", octeon_msi_interrupt0))
 			panic("request_irq(OCTEON_IRQ_PCI_MSI2) failed");
 
-		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt,
-				IRQF_SHARED,
-				"MSI[48:63]", octeon_msi_interrupt))
+		if (request_irq(OCTEON_IRQ_PCI_MSI3, octeon_msi_interrupt0,
+				0, "MSI[48:63]", octeon_msi_interrupt0))
 			panic("request_irq(OCTEON_IRQ_PCI_MSI3) failed");
-
+		msi_irq_size = 64;
 	}
 	return 0;
 }
-
 subsys_initcall(octeon_msi_initialize);
diff --git a/arch/mips/pci/ops-titan-ht.c b/arch/mips/pci/ops-titan-ht.c
index 749c1922d42..57d54adc9e2 100644
--- a/arch/mips/pci/ops-titan-ht.c
+++ b/arch/mips/pci/ops-titan-ht.c
@@ -32,7 +32,7 @@
 #include <asm/titan_dep.h>
 
 static int titan_ht_config_read_dword(struct pci_bus *bus, unsigned int devfn,
-	int offset, u32 * val)
+	int offset, u32 *val)
 {
 	volatile uint32_t address;
 	int busno;
@@ -64,7 +64,7 @@ static int titan_ht_config_read_dword(struct pci_bus *bus, unsigned int devfn,
 }
 
 static int titan_ht_config_read(struct pci_bus *bus, unsigned int devfn,
-	int offset, int size, u32 * val)
+	int offset, int size, u32 *val)
 {
 	uint32_t dword;
 
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 6aa5c542d52..861361e0c9a 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -402,6 +402,10 @@ static void __cvmx_pcie_rc_initialize_config_space(int pcie_port)
 	npei_ctl_status2.s.mps = 0;
 	/* Max read request size = 128 bytes for best Octeon DMA performance */
 	npei_ctl_status2.s.mrrs = 0;
+	if (pcie_port)
+		npei_ctl_status2.s.c1_b1_s = 3; /* Port1 BAR1 Size 256MB */
+	else
+		npei_ctl_status2.s.c0_b1_s = 3; /* Port0 BAR1 Size 256MB */
 	cvmx_write_csr(CVMX_PEXP_NPEI_CTL_STATUS2, npei_ctl_status2.u64);
 
 	/* ECRC Generation (PCIE*_CFG070[GE,CE]) */
@@ -666,6 +670,8 @@ static int __cvmx_pcie_rc_initialize_link(int pcie_port)
 static int cvmx_pcie_rc_initialize(int pcie_port)
 {
 	int i;
+	int base;
+	u64 addr_swizzle;
 	union cvmx_ciu_soft_prst ciu_soft_prst;
 	union cvmx_pescx_bist_status pescx_bist_status;
 	union cvmx_pescx_bist_status2 pescx_bist_status2;
@@ -674,6 +680,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
 	union cvmx_npei_mem_access_subidx mem_access_subid;
 	union cvmx_npei_dbg_data npei_dbg_data;
 	union cvmx_pescx_ctl_status2 pescx_ctl_status2;
+	union cvmx_npei_bar1_indexx bar1_index;
 
 	/*
 	 * Make sure we aren't trying to setup a target mode interface
@@ -918,12 +925,30 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
 	/* Set Octeon's BAR0 to decode 0-16KB. It overlaps with Bar2 */
 	cvmx_write_csr(CVMX_PESCX_P2N_BAR0_START(pcie_port), 0);
 
-	/*
-	 * Disable Octeon's BAR1. It isn't needed in RC mode since
-	 * BAR2 maps all of memory. BAR2 also maps 256MB-512MB into
-	 * the 2nd 256MB of memory.
-	 */
-	cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), -1);
+	/* BAR1 follows BAR2 with a gap. */
+	cvmx_write_csr(CVMX_PESCX_P2N_BAR1_START(pcie_port), CVMX_PCIE_BAR1_RC_BASE);
+
+	bar1_index.u32 = 0;
+	bar1_index.s.addr_idx = (CVMX_PCIE_BAR1_PHYS_BASE >> 22);
+	bar1_index.s.ca = 1;       /* Not Cached */
+	bar1_index.s.end_swp = 1;  /* Endian Swap mode */
+	bar1_index.s.addr_v = 1;   /* Valid entry */
+
+	base = pcie_port ? 16 : 0;
+
+	/* Big endian swizzle for 32-bit PEXP_NCB register. */
+#ifdef __MIPSEB__
+	addr_swizzle = 4;
+#else
+	addr_swizzle = 0;
+#endif
+	for (i = 0; i < 16; i++) {
+		cvmx_write64_uint32((CVMX_PEXP_NPEI_BAR1_INDEXX(base) ^ addr_swizzle),
+				    bar1_index.u32);
+		base++;
+		/* 256MB / 16 >> 22 == 4 */
+		bar1_index.s.addr_idx += (((1ull << 28) / 16ull) >> 22);
+	}
 
 	/*
 	 * Set Octeon's BAR2 to decode 0-2^39. Bar0 and Bar1 take
diff --git a/arch/mips/pmc-sierra/Platform b/arch/mips/pmc-sierra/Platform
new file mode 100644
index 00000000000..f092f2524c5
--- /dev/null
+++ b/arch/mips/pmc-sierra/Platform
@@ -0,0 +1,14 @@
+#
+# PMC-Sierra MSP SOCs
+#
+platform-$(CONFIG_PMC_MSP)	+= pmc-sierra/msp71xx/
+cflags-$(CONFIG_PMC_MSP)	+= -I$(srctree)/arch/mips/include/asm/pmc-sierra/msp71xx \
+					-mno-branch-likely
+load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
+
+#
+# PMC-Sierra Yosemite
+#
+platform-$(CONFIG_PMC_YOSEMITE)	+= pmc-sierra/yosemite/
+cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemite
+load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
index 11769b55438..c841f083a7f 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
@@ -32,9 +32,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 #include <msp_regops.h>
-#ifdef CONFIG_PMCTWILED
-#include <msp_led_macros.h>
-#endif
 
 /* For hwbutton_interrupt->initial_state */
 #define HWBUTTON_HI	0x1
@@ -82,10 +79,6 @@ static void standby_on(void *data)
 	printk(KERN_WARNING "STANDBY switch was set to ON (not implemented)\n");
 
 	/* TODO: Put board in standby mode */
-#ifdef CONFIG_PMCTWILED
-	msp_led_turn_off(MSP_LED_PWRSTANDBY_GREEN);
-	msp_led_turn_on(MSP_LED_PWRSTANDBY_RED);
-#endif
 }
 
 static void standby_off(void *data)
@@ -94,10 +87,6 @@ static void standby_off(void *data)
 		"STANDBY switch was set to OFF (not implemented)\n");
 
 	/* TODO: Take out of standby mode */
-#ifdef CONFIG_PMCTWILED
-	msp_led_turn_on(MSP_LED_PWRSTANDBY_GREEN);
-	msp_led_turn_off(MSP_LED_PWRSTANDBY_RED);
-#endif
 }
 
 static struct hwbutton_interrupt softreset_sw = {
diff --git a/arch/mips/pmc-sierra/yosemite/ht-irq.c b/arch/mips/pmc-sierra/yosemite/ht-irq.c
index 5aec4057314..86b98e98fb4 100644
--- a/arch/mips/pmc-sierra/yosemite/ht-irq.c
+++ b/arch/mips/pmc-sierra/yosemite/ht-irq.c
@@ -35,18 +35,17 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-        struct pci_bus *current_bus = bus;
-        struct pci_dev *devices;
-        struct list_head *devices_link;
+	struct pci_bus *current_bus = bus;
+	struct pci_dev *devices;
+	struct list_head *devices_link;
 
 	list_for_each(devices_link, &(current_bus->devices)) {
-                devices = pci_dev_b(devices_link);
-                if (devices == NULL)
-                        continue;
+		devices = pci_dev_b(devices_link);
+		if (devices == NULL)
+			continue;
 	}
 
 	/*
 	 * PLX and SPKT related changes go here
 	 */
-
 }
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 51021cfd04b..25bbbf428be 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -150,8 +150,4 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_GDB_CONSOLE
-	register_gdb_console();
-#endif
 }
diff --git a/arch/mips/pnx833x/Makefile b/arch/mips/pnx833x/Makefile
new file mode 100644
index 00000000000..02c4698cab0
--- /dev/null
+++ b/arch/mips/pnx833x/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SOC_PNX833X)	+= common/
+obj-$(CONFIG_NXP_STB220)	+= stb22x/
+obj-$(CONFIG_NXP_STB225)	+= stb22x/
diff --git a/arch/mips/pnx833x/Platform b/arch/mips/pnx833x/Platform
new file mode 100644
index 00000000000..7e6ec4dbc8d
--- /dev/null
+++ b/arch/mips/pnx833x/Platform
@@ -0,0 +1,5 @@
+# NXP STB225
+platform-$(CONFIG_SOC_PNX833X)	+= pnx833x/
+cflags-$(CONFIG_SOC_PNX833X)    += -Iarch/mips/include/asm/mach-pnx833x
+load-$(CONFIG_NXP_STB220)	+= 0xffffffff80001000
+load-$(CONFIG_NXP_STB225)	+= 0xffffffff80001000
diff --git a/arch/mips/nxp/pnx833x/common/Makefile b/arch/mips/pnx833x/common/Makefile
index 4a16f3b503b..1a46dd291b1 100644
--- a/arch/mips/nxp/pnx833x/common/Makefile
+++ b/arch/mips/pnx833x/common/Makefile
@@ -1,3 +1 @@
 obj-y := interrupts.o platform.o prom.o setup.o reset.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/pnx833x/common/interrupts.c
index 941916f8aaf..941916f8aaf 100644
--- a/arch/mips/nxp/pnx833x/common/interrupts.c
+++ b/arch/mips/pnx833x/common/interrupts.c
diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 01f8345a206..01f8345a206 100644
--- a/arch/mips/nxp/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/pnx833x/common/prom.c
index 29969f90a6b..29969f90a6b 100644
--- a/arch/mips/nxp/pnx833x/common/prom.c
+++ b/arch/mips/pnx833x/common/prom.c
diff --git a/arch/mips/nxp/pnx833x/common/reset.c b/arch/mips/pnx833x/common/reset.c
index e0ea96d29fd..e0ea96d29fd 100644
--- a/arch/mips/nxp/pnx833x/common/reset.c
+++ b/arch/mips/pnx833x/common/reset.c
diff --git a/arch/mips/nxp/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c
index e51fbc4b644..e51fbc4b644 100644
--- a/arch/mips/nxp/pnx833x/common/setup.c
+++ b/arch/mips/pnx833x/common/setup.c
diff --git a/arch/mips/pnx833x/stb22x/Makefile b/arch/mips/pnx833x/stb22x/Makefile
new file mode 100644
index 00000000000..7b580060de5
--- /dev/null
+++ b/arch/mips/pnx833x/stb22x/Makefile
@@ -0,0 +1 @@
+obj-y := board.o
diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
index 644eb7c3210..644eb7c3210 100644
--- a/arch/mips/nxp/pnx833x/stb22x/board.c
+++ b/arch/mips/pnx833x/stb22x/board.c
diff --git a/arch/mips/pnx8550/Makefile b/arch/mips/pnx8550/Makefile
new file mode 100644
index 00000000000..3f7e8561437
--- /dev/null
+++ b/arch/mips/pnx8550/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SOC_PNX8550)	+= common/
+obj-$(CONFIG_PNX8550_JBS)	+= jbs/
+obj-$(CONFIG_PNX8550_STB810)	+= stb810/
diff --git a/arch/mips/pnx8550/Platform b/arch/mips/pnx8550/Platform
new file mode 100644
index 00000000000..0e7fbde768d
--- /dev/null
+++ b/arch/mips/pnx8550/Platform
@@ -0,0 +1,7 @@
+platform-$(CONFIG_SOC_PNX8550)	+= pnx8550/
+
+cflags-$(CONFIG_SOC_PNX8550)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-pnx8550
+
+load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
+load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/pnx8550/common/Makefile
index dd9e7b1f7fd..f8ce695dc54 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/pnx8550/common/Makefile
@@ -24,5 +24,3 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/pnx8550/common/int.c
index cfed5051dc6..cfed5051dc6 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/pnx8550/common/int.c
diff --git a/arch/mips/pnx8550/common/pci.c b/arch/mips/pnx8550/common/pci.c
new file mode 100644
index 00000000000..98e86ddb86c
--- /dev/null
+++ b/arch/mips/pnx8550/common/pci.c
@@ -0,0 +1,134 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *
+ * Author: source@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <pci.h>
+#include <glb.h>
+#include <nand.h>
+
+static struct resource pci_io_resource = {
+	.start	= PNX8550_PCIIO + 0x1000,	/* reserve regacy I/O space */
+	.end	= PNX8550_PCIIO + PNX8550_PCIIO_SIZE,
+	.name	= "pci IO space",
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+	.start	= PNX8550_PCIMEM,
+	.end	= PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1,
+	.name	= "pci memory space",
+	.flags	= IORESOURCE_MEM
+};
+
+extern struct pci_ops pnx8550_pci_ops;
+
+static struct pci_controller pnx8550_controller = {
+	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
+	.io_resource	= &pci_io_resource,
+	.mem_resource	= &pci_mem_resource,
+};
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+static inline unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+static int __init pnx8550_pci_setup(void)
+{
+	int pci_mem_code;
+	int mem_size = get_system_mem_size() >> 20;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* Calc the PCI mem size code */
+	if (mem_size >= 128)
+		pci_mem_code = SIZE_128M;
+	else if (mem_size >= 64)
+		pci_mem_code = SIZE_64M;
+	else if (mem_size >= 32)
+		pci_mem_code = SIZE_32M;
+	else
+		pci_mem_code = SIZE_16M;
+
+	/* Set PCI_XIO registers */
+	outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO);
+	outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI);
+	outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO);
+	outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI);
+
+	/* Send memory transaction via PCI_BASE2 */
+	outl(0x00000001, PCI_BASE | PCI_IO);
+
+	/* Unlock the setup register */
+	outl(0xca, PCI_BASE | PCI_UNLOCKREG);
+
+	/*
+	 * BAR0 of PNX8550 (pci base 10) must be zero in order for ide
+	 * to work, and in order for bus_to_baddr to work without any
+	 * hacks.
+	 */
+	outl(0x00000000, PCI_BASE | PCI_BASE10);
+
+	/*
+	 *These two bars are set by default or the boot code.
+	 * However, it's safer to set them here so we're not boot
+	 * code dependent.
+	 */
+	outl(0x1be00000, PCI_BASE | PCI_BASE14);  /* PNX MMIO */
+	outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18);  /* XIO      */
+
+	outl(PCI_EN_TA |
+	     PCI_EN_PCI2MMI |
+	     PCI_EN_XIO |
+	     PCI_SETUP_BASE18_SIZE(SIZE_32M) |
+	     PCI_SETUP_BASE18_EN |
+	     PCI_SETUP_BASE14_EN |
+	     PCI_SETUP_BASE10_PREF |
+	     PCI_SETUP_BASE10_SIZE(pci_mem_code) |
+	     PCI_SETUP_CFGMANAGE_EN |
+	     PCI_SETUP_PCIARB_EN,
+	     PCI_BASE |
+	     PCI_SETUP);	/* PCI_SETUP */
+	outl(0x00000000, PCI_BASE | PCI_CTRL);	/* PCI_CONTROL */
+
+	register_pci_controller(&pnx8550_controller);
+
+	return 0;
+}
+
+arch_initcall(pnx8550_pci_setup);
diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/pnx8550/common/platform.c
index 5264cc09a27..5264cc09a27 100644
--- a/arch/mips/nxp/pnx8550/common/platform.c
+++ b/arch/mips/pnx8550/common/platform.c
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/pnx8550/common/proc.c
index 3bba5ec828e..3bba5ec828e 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/pnx8550/common/proc.c
diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c
index 32f70097c3c..32f70097c3c 100644
--- a/arch/mips/nxp/pnx8550/common/prom.c
+++ b/arch/mips/pnx8550/common/prom.c
diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/pnx8550/common/reset.c
index fadd8744a6b..fadd8744a6b 100644
--- a/arch/mips/nxp/pnx8550/common/reset.c
+++ b/arch/mips/pnx8550/common/reset.c
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
new file mode 100644
index 00000000000..64246c9c875
--- /dev/null
+++ b/arch/mips/pnx8550/common/setup.c
@@ -0,0 +1,145 @@
+/*
+ *
+ * 2.6 port, Embedded Alley Solutions, Inc
+ *
+ *  Based on Per Hallsmark, per.hallsmark@mvista.com
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/serial_pnx8xxx.h>
+#include <linux/pm.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/time.h>
+
+#include <glb.h>
+#include <int.h>
+#include <pci.h>
+#include <uart.h>
+#include <nand.h>
+
+extern void __init board_setup(void);
+extern void pnx8550_machine_restart(char *);
+extern void pnx8550_machine_halt(void);
+extern void pnx8550_machine_power_off(void);
+extern struct resource ioport_resource;
+extern struct resource iomem_resource;
+extern char *prom_getcmdline(void);
+
+struct resource standard_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_BUSY
+	}, {
+		.start	= 0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_BUSY
+	},
+};
+
+#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
+
+extern struct resource pci_io_resource;
+extern struct resource pci_mem_resource;
+
+/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
+unsigned long get_system_mem_size(void)
+{
+	/* Read IP2031_RANK0_ADDR_LO */
+	unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
+	/* Read IP2031_RANK1_ADDR_HI */
+	unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
+
+	return dram_r1_hi - dram_r0_lo + 1;
+}
+
+int pnx8550_console_port = -1;
+
+void __init plat_mem_setup(void)
+{
+	int i;
+	char* argptr;
+
+	board_setup();  /* board specific setup */
+
+        _machine_restart = pnx8550_machine_restart;
+        _machine_halt = pnx8550_machine_halt;
+        pm_power_off = pnx8550_machine_power_off;
+
+	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
+	   Bit 1:Enable DAC Powerdown
+	  -> 0:DACs are enabled and are working normally
+	     1:DACs are powerdown
+	   Bit 0:Enable of PCI inta output
+	  -> 0 = Disable PCI inta output
+	     1 = Enable PCI inta output
+	*/
+	PNX8550_GLB2_ENAB_INTA_O = 0;
+
+	/* IO/MEM resources. */
+	set_io_port_base(PNX8550_PORT_BASE);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+
+	/* Request I/O space for devices on this board */
+	for (i = 0; i < STANDARD_IO_RESOURCES; i++)
+		request_resource(&ioport_resource, standard_io_resources + i);
+
+	/* Place the Mode Control bit for GPIO pin 16 in primary function */
+	/* Pin 16 is used by UART1, UA1_TX                                */
+	outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
+			(PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
+			PNX8550_GPIO_MC1);
+
+	argptr = prom_getcmdline();
+	if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
+		argptr += strlen("console=ttyS");
+		pnx8550_console_port = *argptr == '0' ? 0 : 1;
+
+		/* We must initialize the UART (console) before early printk */
+		/* Set LCR to 8-bit and BAUD to 38400 (no 5)                */
+		ip3106_lcr(UART_BASE, pnx8550_console_port) =
+			PNX8XXX_UART_LCR_8BIT;
+		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
+	}
+
+	return;
+}
diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/pnx8550/common/time.c
index 8836c6203df..8836c6203df 100644
--- a/arch/mips/nxp/pnx8550/common/time.c
+++ b/arch/mips/pnx8550/common/time.c
diff --git a/arch/mips/pnx8550/jbs/Makefile b/arch/mips/pnx8550/jbs/Makefile
new file mode 100644
index 00000000000..c4dc3d53eb5
--- /dev/null
+++ b/arch/mips/pnx8550/jbs/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the NXP JBS Board.
+
+obj-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/pnx8550/jbs/board_setup.c
index 57dd903ca40..57dd903ca40 100644
--- a/arch/mips/nxp/pnx8550/jbs/board_setup.c
+++ b/arch/mips/pnx8550/jbs/board_setup.c
diff --git a/arch/mips/nxp/pnx8550/jbs/init.c b/arch/mips/pnx8550/jbs/init.c
index d59b4a4e5e8..d59b4a4e5e8 100644
--- a/arch/mips/nxp/pnx8550/jbs/init.c
+++ b/arch/mips/pnx8550/jbs/init.c
diff --git a/arch/mips/nxp/pnx8550/jbs/irqmap.c b/arch/mips/pnx8550/jbs/irqmap.c
index 7fc89842002..7fc89842002 100644
--- a/arch/mips/nxp/pnx8550/jbs/irqmap.c
+++ b/arch/mips/pnx8550/jbs/irqmap.c
diff --git a/arch/mips/pnx8550/stb810/Makefile b/arch/mips/pnx8550/stb810/Makefile
new file mode 100644
index 00000000000..cb4ff022f1f
--- /dev/null
+++ b/arch/mips/pnx8550/stb810/Makefile
@@ -0,0 +1,4 @@
+
+# Makefile for the NXP STB810 Board.
+
+obj-y := prom_init.o board_setup.o irqmap.o
diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/pnx8550/stb810/board_setup.c
index af2a55e0b4e..af2a55e0b4e 100644
--- a/arch/mips/nxp/pnx8550/stb810/board_setup.c
+++ b/arch/mips/pnx8550/stb810/board_setup.c
diff --git a/arch/mips/nxp/pnx8550/stb810/irqmap.c b/arch/mips/pnx8550/stb810/irqmap.c
index 8c034963ddc..8c034963ddc 100644
--- a/arch/mips/nxp/pnx8550/stb810/irqmap.c
+++ b/arch/mips/pnx8550/stb810/irqmap.c
diff --git a/arch/mips/nxp/pnx8550/stb810/prom_init.c b/arch/mips/pnx8550/stb810/prom_init.c
index ca7f4ada064..ca7f4ada064 100644
--- a/arch/mips/nxp/pnx8550/stb810/prom_init.c
+++ b/arch/mips/pnx8550/stb810/prom_init.c
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
index 0a0d73c0564..baf6e9092a9 100644
--- a/arch/mips/powertv/Makefile
+++ b/arch/mips/powertv/Makefile
@@ -23,6 +23,9 @@
 # under Linux.
 #
 
-obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o ioremap.o memory.o powertv_setup.o reset.o time.o \
+	asic/ pci/
 
-EXTRA_CFLAGS += -Wall -Werror
+obj-$(CONFIG_USB) += powertv-usb.o
+
+EXTRA_CFLAGS += -Wall
diff --git a/arch/mips/powertv/Platform b/arch/mips/powertv/Platform
new file mode 100644
index 00000000000..4eb5af1d8ee
--- /dev/null
+++ b/arch/mips/powertv/Platform
@@ -0,0 +1,7 @@
+#
+# Cisco PowerTV Platform
+#
+platform-$(CONFIG_POWERTV)	+= powertv/
+cflags-$(CONFIG_POWERTV)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-powertv
+load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
diff --git a/arch/mips/powertv/asic/Makefile b/arch/mips/powertv/asic/Makefile
index bebfdcff044..f0e95dc0ac9 100644
--- a/arch/mips/powertv/asic/Makefile
+++ b/arch/mips/powertv/asic/Makefile
@@ -16,8 +16,8 @@
 # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 #
 
-obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
-	 irq_asic.o prealloc-calliope.o prealloc-cronus.o \
-	 prealloc-cronuslite.o prealloc-zeus.o
+obj-y += asic-calliope.o asic-cronus.o asic-gaia.o asic-zeus.o \
+	asic_devices.o asic_int.o irq_asic.o prealloc-calliope.o \
+	prealloc-cronus.o prealloc-cronuslite.o prealloc-gaia.o prealloc-zeus.o
 
 EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c
index 1ae6623444b..0a170e0ffea 100644
--- a/arch/mips/powertv/asic/asic-calliope.c
+++ b/arch/mips/powertv/asic/asic-calliope.c
@@ -77,7 +77,7 @@ const struct register_map calliope_register_map __initdata = {
 	.int_docsis_en = {.phys = CALLIOPE_ADDR(0xA028F4)},
 
 	.mips_pll_setup = {.phys = CALLIOPE_ADDR(0x980000)},
-	.usb_fs = {.phys = CALLIOPE_ADDR(0x980030)},
+	.fs432x4b4_usb_ctl = {.phys = CALLIOPE_ADDR(0x980030)},
 	.test_bus = {.phys = CALLIOPE_ADDR(0x9800CC)},
 	.crt_spare = {.phys = CALLIOPE_ADDR(0x9800d4)},
 	.usb2_ohci_int_mask = {.phys = CALLIOPE_ADDR(0x9A000c)},
diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c
index 5bb64bfb508..bbc0c122be5 100644
--- a/arch/mips/powertv/asic/asic-cronus.c
+++ b/arch/mips/powertv/asic/asic-cronus.c
@@ -77,13 +77,13 @@ const struct register_map cronus_register_map __initdata = {
 	.int_docsis_en = {.phys = CRONUS_ADDR(0x2A28F4)},
 
 	.mips_pll_setup = {.phys = CRONUS_ADDR(0x1C0000)},
-	.usb_fs = {.phys = CRONUS_ADDR(0x1C0018)},
+	.fs432x4b4_usb_ctl = {.phys = CRONUS_ADDR(0x1C0028)},
 	.test_bus = {.phys = CRONUS_ADDR(0x1C00CC)},
 	.crt_spare = {.phys = CRONUS_ADDR(0x1c00d4)},
 	.usb2_ohci_int_mask = {.phys = CRONUS_ADDR(0x20000C)},
 	.usb2_strap = {.phys = CRONUS_ADDR(0x200014)},
 	.ehci_hcapbase = {.phys = CRONUS_ADDR(0x21FE00)},
-	.ohci_hc_revision = {.phys = CRONUS_ADDR(0x1E0000)},
+	.ohci_hc_revision = {.phys = CRONUS_ADDR(0x21fc00)},
 	.bcm1_bs_lmi_steer = {.phys = CRONUS_ADDR(0x2E0008)},
 	.usb2_control = {.phys = CRONUS_ADDR(0x2E004C)},
 	.usb2_stbus_obc = {.phys = CRONUS_ADDR(0x21FF00)},
diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c
new file mode 100644
index 00000000000..91dda682752
--- /dev/null
+++ b/arch/mips/powertv/asic/asic-gaia.c
@@ -0,0 +1,96 @@
+/*
+ * Locations of devices in the Gaia ASIC
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       David VomLehn
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+const struct register_map gaia_register_map __initdata = {
+	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
+	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
+	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
+
+	.chipver3 = {.phys = GAIA_IO_BASE + 0x2A0800},
+	.chipver2 = {.phys = GAIA_IO_BASE + 0x2A0804},
+	.chipver1 = {.phys = GAIA_IO_BASE + 0x2A0808},
+	.chipver0 = {.phys = GAIA_IO_BASE + 0x2A080C},
+
+	/* The registers of IRBlaster */
+	.uart1_intstat = {.phys = GAIA_IO_BASE + 0x2A1800},
+	.uart1_inten = {.phys = GAIA_IO_BASE + 0x2A1804},
+	.uart1_config1 = {.phys = GAIA_IO_BASE + 0x2A1808},
+	.uart1_config2 = {.phys = GAIA_IO_BASE + 0x2A180C},
+	.uart1_divisorhi = {.phys = GAIA_IO_BASE + 0x2A1810},
+	.uart1_divisorlo = {.phys = GAIA_IO_BASE + 0x2A1814},
+	.uart1_data = {.phys = GAIA_IO_BASE + 0x2A1818},
+	.uart1_status = {.phys = GAIA_IO_BASE + 0x2A181C},
+
+	.int_stat_3 = {.phys = GAIA_IO_BASE + 0x2A2800},
+	.int_stat_2 = {.phys = GAIA_IO_BASE + 0x2A2804},
+	.int_stat_1 = {.phys = GAIA_IO_BASE + 0x2A2808},
+	.int_stat_0 = {.phys = GAIA_IO_BASE + 0x2A280C},
+	.int_config = {.phys = GAIA_IO_BASE + 0x2A2810},
+	.int_int_scan = {.phys = GAIA_IO_BASE + 0x2A2818},
+	.ien_int_3 = {.phys = GAIA_IO_BASE + 0x2A2830},
+	.ien_int_2 = {.phys = GAIA_IO_BASE + 0x2A2834},
+	.ien_int_1 = {.phys = GAIA_IO_BASE + 0x2A2838},
+	.ien_int_0 = {.phys = GAIA_IO_BASE + 0x2A283C},
+	.int_level_3_3 = {.phys = GAIA_IO_BASE + 0x2A2880},
+	.int_level_3_2 = {.phys = GAIA_IO_BASE + 0x2A2884},
+	.int_level_3_1 = {.phys = GAIA_IO_BASE + 0x2A2888},
+	.int_level_3_0 = {.phys = GAIA_IO_BASE + 0x2A288C},
+	.int_level_2_3 = {.phys = GAIA_IO_BASE + 0x2A2890},
+	.int_level_2_2 = {.phys = GAIA_IO_BASE + 0x2A2894},
+	.int_level_2_1 = {.phys = GAIA_IO_BASE + 0x2A2898},
+	.int_level_2_0 = {.phys = GAIA_IO_BASE + 0x2A289C},
+	.int_level_1_3 = {.phys = GAIA_IO_BASE + 0x2A28A0},
+	.int_level_1_2 = {.phys = GAIA_IO_BASE + 0x2A28A4},
+	.int_level_1_1 = {.phys = GAIA_IO_BASE + 0x2A28A8},
+	.int_level_1_0 = {.phys = GAIA_IO_BASE + 0x2A28AC},
+	.int_level_0_3 = {.phys = GAIA_IO_BASE + 0x2A28B0},
+	.int_level_0_2 = {.phys = GAIA_IO_BASE + 0x2A28B4},
+	.int_level_0_1 = {.phys = GAIA_IO_BASE + 0x2A28B8},
+	.int_level_0_0 = {.phys = GAIA_IO_BASE + 0x2A28BC},
+	.int_docsis_en = {.phys = GAIA_IO_BASE + 0x2A28F4},
+
+	.mips_pll_setup = {.phys = GAIA_IO_BASE + 0x1C0000},
+	.fs432x4b4_usb_ctl = {.phys = GAIA_IO_BASE + 0x1C0024},
+	.test_bus = {.phys = GAIA_IO_BASE + 0x1C00CC},
+	.crt_spare = {.phys = GAIA_IO_BASE + 0x1c0108},
+	.usb2_ohci_int_mask = {.phys = GAIA_IO_BASE + 0x20000C},
+	.usb2_strap = {.phys = GAIA_IO_BASE + 0x200014},
+	.ehci_hcapbase = {.phys = GAIA_IO_BASE + 0x21FE00},
+	.ohci_hc_revision = {.phys = GAIA_IO_BASE + 0x21fc00},
+	.bcm1_bs_lmi_steer = {.phys = GAIA_IO_BASE + 0x2E0004},
+	.usb2_control = {.phys = GAIA_IO_BASE + 0x2E004C},
+	.usb2_stbus_obc = {.phys = GAIA_IO_BASE + 0x21FF00},
+	.usb2_stbus_mess_size = {.phys = GAIA_IO_BASE + 0x21FF04},
+	.usb2_stbus_chunk_size = {.phys = GAIA_IO_BASE + 0x21FF08},
+
+	.pcie_regs = {.phys = GAIA_IO_BASE + 0x220000},
+	.tim_ch = {.phys = GAIA_IO_BASE + 0x2A2C10},
+	.tim_cl = {.phys = GAIA_IO_BASE + 0x2A2C14},
+	.gpio_dout = {.phys = GAIA_IO_BASE + 0x2A2C20},
+	.gpio_din = {.phys = GAIA_IO_BASE + 0x2A2C24},
+	.gpio_dir = {.phys = GAIA_IO_BASE + 0x2A2C2C},
+	.watchdog = {.phys = GAIA_IO_BASE + 0x2A2C30},
+	.front_panel = {.phys = GAIA_IO_BASE + 0x2A3800},
+};
diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c
index 095cbe10ebb..4a05bb09647 100644
--- a/arch/mips/powertv/asic/asic-zeus.c
+++ b/arch/mips/powertv/asic/asic-zeus.c
@@ -77,7 +77,7 @@ const struct register_map zeus_register_map __initdata = {
 	.int_docsis_en = {.phys = ZEUS_ADDR(0x2828F4)},
 
 	.mips_pll_setup = {.phys = ZEUS_ADDR(0x1a0000)},
-	.usb_fs = {.phys = ZEUS_ADDR(0x1a0018)},
+	.fs432x4b4_usb_ctl = {.phys = ZEUS_ADDR(0x1a0018)},
 	.test_bus = {.phys = ZEUS_ADDR(0x1a0238)},
 	.crt_spare = {.phys = ZEUS_ADDR(0x1a0090)},
 	.usb2_ohci_int_mask = {.phys = ZEUS_ADDR(0x1e000c)},
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 9ec523e4dd0..e56fa61b399 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -1,7 +1,6 @@
 /*
- *                   ASIC Device List Intialization
  *
- * Description:  Defines the platform resources for the SA settop.
+ * Description:  Defines the platform resources for Gaia-based settops.
  *
  * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
  *
@@ -19,11 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  *
- * Author:       Ken Eppinett
- *               David Schleef <ds@schleef.org>
- *
- * Description:  Defines the platform resources for the SA settop.
- *
  * NOTE: The bootloader allocates persistent memory at an address which is
  * 16 MiB below the end of the highest address in KSEG0. All fixed
  * address memory reservations must avoid this region.
@@ -39,7 +33,6 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
-#include <linux/gfp.h>
 #include <asm/page.h>
 #include <linux/swap.h>
 #include <linux/highmem.h>
@@ -74,14 +67,13 @@ unsigned long asic_phy_base;
 unsigned long asic_base;
 EXPORT_SYMBOL(asic_base);			/* Exported for testing */
 struct resource *gp_resources;
-static bool usb_configured;
 
 /*
  * Don't recommend to use it directly, it is usually used by kernel internally.
  * Portable code should be using interfaces such as ioremp, dma_map_single, etc.
  */
-unsigned long phys_to_bus_offset;
-EXPORT_SYMBOL(phys_to_bus_offset);
+unsigned long phys_to_dma_offset;
+EXPORT_SYMBOL(phys_to_dma_offset);
 
 /*
  *
@@ -97,101 +89,19 @@ struct resource asic_resource = {
 };
 
 /*
- *
- * USB Host Resource Definition
- *
- */
-
-static struct resource ehci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start  = 0,
-		.end    = 0xff,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.start  = irq_usbehci,
-		.end    = irq_usbehci,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ehci_device = {
-	.name = "powertv-ehci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ehci_resources,
-	.dev = {
-		.dma_mask = &ehci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource ohci_resources[] = {
-	{
-		.parent = &asic_resource,
-		.start  = 0,
-		.end    = 0xff,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.start  = irq_usbohci,
-		.end    = irq_usbohci,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device ohci_device = {
-	.name = "powertv-ohci",
-	.id = 0,
-	.num_resources = 2,
-	.resource = ohci_resources,
-	.dev = {
-		.dma_mask = &ohci_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct platform_device *platform_devices[] = {
-	&ehci_device,
-	&ohci_device,
-};
-
-/*
- *
- * Platform Configuration and Device Initialization
- *
- */
-static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
-{
-	int en_prg, byp, pwr, nsb, val;
-	int sout;
-
-	sout = 1;
-	en_prg = 1;
-	byp = 0;
-	nsb = 1;
-	pwr = 1;
-
-	val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
-		(nsb<<1) | (disable_div_by_3<<5));
-
-	asic_write(val, usb_fs);
-	asic_write(val | (en_prg<<4), usb_fs);
-	asic_write(val | (en_prg<<4) | pwr, usb_fs);
-}
-
-/*
  * Allow override of bootloader-specified model
+ * Returns zero on success, a negative errno value on failure.  This parameter
+ * allows overriding of the bootloader-specified model.
  */
 static char __initdata cmdline[COMMAND_LINE_SIZE];
 
 #define	FORCEFAMILY_PARAM	"forcefamily"
 
+/*
+ * check_forcefamily - check for, and parse, forcefamily command line parameter
+ * @forced_family:	Pointer to two-character array in which to store the
+ *			value of the forcedfamily parameter, if any.
+ */
 static __init int check_forcefamily(unsigned char forced_family[2])
 {
 	const char *p;
@@ -231,14 +141,10 @@ static __init int check_forcefamily(unsigned char forced_family[2])
  */
 static __init noinline void platform_set_family(void)
 {
-#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
-
 	unsigned char forced_family[2];
 	unsigned short bootldr_family;
 
-	check_forcefamily(forced_family);
-
-	if (forced_family[0] != '\0' && forced_family[1] != '\0')
+	if (check_forcefamily(forced_family) == 0)
 		bootldr_family = BOOTLDRFAMILY(forced_family[0],
 			forced_family[1]);
 	else {
@@ -289,6 +195,9 @@ static __init noinline void platform_set_family(void)
 	case BOOTLDRFAMILY('F', '1'):
 		platform_family = FAMILY_1500VZF;
 		break;
+	case BOOTLDRFAMILY('8', '7'):
+		platform_family = FAMILY_8700;
+		break;
 	default:
 		platform_family = -1;
 	}
@@ -301,24 +210,9 @@ unsigned int platform_get_family(void)
 EXPORT_SYMBOL(platform_get_family);
 
 /*
- * \brief usb_eye_configure() for optimizing the USB eye on Calliope.
- *
- * \param     unsigned int value saved to the register.
- *
- * \return    none
- *
- */
-static void __init usb_eye_configure(unsigned int value)
-{
-	asic_write(asic_read(crt_spare) | value, crt_spare);
-}
-
-/*
  * platform_get_asic - determine the ASIC type.
  *
- * \param     none
- *
- * \return    ASIC type; ASIC_UNKNOWN if none
+ * Returns the ASIC type, or ASIC_UNKNOWN if unknown
  *
  */
 enum asic_type platform_get_asic(void)
@@ -328,93 +222,10 @@ enum asic_type platform_get_asic(void)
 EXPORT_SYMBOL(platform_get_asic);
 
 /*
- * platform_configure_usb - usb configuration based on platform type.
- * @bcm1_usb2_ctl:	value for the BCM1_USB2_CTL register, which is
- *			quirky
- */
-static void __init platform_configure_usb(void)
-{
-	u32 bcm1_usb2_ctl;
-
-	if (usb_configured)
-		return;
-
-	switch (asic) {
-	case ASIC_ZEUS:
-	case ASIC_CRONUS:
-	case ASIC_CRONUSLITE:
-		fs_update(0x0000, 0x11, 0x02, 0);
-		bcm1_usb2_ctl = 0x803;
-		break;
-
-	case ASIC_CALLIOPE:
-		fs_update(0x0000, 0x11, 0x02, 1);
-
-		switch (platform_family) {
-		case FAMILY_1500VZE:
-			break;
-
-		case FAMILY_1500VZF:
-			usb_eye_configure(0x003c0000);
-			break;
-
-		default:
-			usb_eye_configure(0x00300000);
-			break;
-		}
-
-		bcm1_usb2_ctl = 0x803;
-		break;
-
-	default:
-		pr_err("Unknown ASIC type: %d\n", asic);
-		break;
-	}
-
-	/* turn on USB power */
-	asic_write(0, usb2_strap);
-	/* Enable all OHCI interrupts */
-	asic_write(bcm1_usb2_ctl, usb2_control);
-	/* USB2_STBUS_OBC store32/load32 */
-	asic_write(3, usb2_stbus_obc);
-	/* USB2_STBUS_MESS_SIZE 2 packets */
-	asic_write(1, usb2_stbus_mess_size);
-	/* USB2_STBUS_CHUNK_SIZE 2 packets */
-	asic_write(1, usb2_stbus_chunk_size);
-
-	usb_configured = true;
-}
-
-/*
- * Set up the USB EHCI interface
+ * set_register_map - set ASIC register configuration
+ * @phys_base:	Physical address of the base of the ASIC registers
+ * @map:	Description of key ASIC registers
  */
-void platform_configure_usb_ehci()
-{
-	platform_configure_usb();
-}
-
-/*
- * Set up the USB OHCI interface
- */
-void platform_configure_usb_ohci()
-{
-	platform_configure_usb();
-}
-
-/*
- * Shut the USB EHCI interface down--currently a NOP
- */
-void platform_unconfigure_usb_ehci()
-{
-}
-
-/*
- * Shut the USB OHCI interface down--currently a NOP
- */
-void platform_unconfigure_usb_ohci()
-{
-}
-
 static void __init set_register_map(unsigned long phys_base,
 	const struct register_map *map)
 {
@@ -526,6 +337,15 @@ void __init configure_platform(void)
 			"DVR_CAPABLE\n");
 		break;
 
+	case FAMILY_8700:
+		platform_features = FFS_CAPABLE | PCIE_CAPABLE;
+		asic = ASIC_GAIA;
+		set_register_map(GAIA_IO_BASE, &gaia_register_map);
+		gp_resources = dvr_gaia_resources;
+
+		pr_info("Platform: 8700 - GAIA, DVR_CAPABLE\n");
+		break;
+
 	default:
 		pr_crit("Platform:  UNKNOWN PLATFORM\n");
 		break;
@@ -533,10 +353,10 @@ void __init configure_platform(void)
 
 	switch (asic) {
 	case ASIC_ZEUS:
-		phys_to_bus_offset = 0x30000000;
+		phys_to_dma_offset = 0x30000000;
 		break;
 	case ASIC_CALLIOPE:
-		phys_to_bus_offset = 0x10000000;
+		phys_to_dma_offset = 0x10000000;
 		break;
 	case ASIC_CRONUSLITE:
 		/* Fall through */
@@ -546,42 +366,16 @@ void __init configure_platform(void)
 		 * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
 		 * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
 		 */
-		phys_to_bus_offset = 0x10000000;
+		phys_to_dma_offset = 0x10000000;
 		break;
 	default:
-		phys_to_bus_offset = 0x00000000;
+		phys_to_dma_offset = 0x00000000;
 		break;
 	}
 }
 
-/**
- * platform_devices_init - sets up USB device resourse.
- */
-static int __init platform_devices_init(void)
-{
-	pr_notice("%s: ----- Initializing USB resources -----\n", __func__);
-
-	asic_resource.start = asic_phy_base;
-	asic_resource.end += asic_resource.start;
-
-	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
-	ehci_resources[0].end += ehci_resources[0].start;
-
-	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
-	ohci_resources[0].end += ohci_resources[0].start;
-
-	set_io_port_base(0);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	return 0;
-}
-
-arch_initcall(platform_devices_init);
-
 /*
- *
- * BOOTMEM ALLOCATION
+ * RESOURCE ALLOCATION
  *
  */
 /*
@@ -603,7 +397,7 @@ void __init platform_alloc_bootmem(void)
 		int size = gp_resources[i].end - gp_resources[i].start + 1;
 		if ((gp_resources[i].start != 0) &&
 			((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
-			reserve_bootmem(bus_to_phys(gp_resources[i].start),
+			reserve_bootmem(dma_to_phys(gp_resources[i].start),
 				size, 0);
 			total += gp_resources[i].end -
 				gp_resources[i].start + 1;
@@ -627,7 +421,7 @@ void __init platform_alloc_bootmem(void)
 
 			else {
 				gp_resources[i].start =
-					phys_to_bus(virt_to_phys(mem));
+					phys_to_dma(virt_to_phys(mem));
 				gp_resources[i].end =
 					gp_resources[i].start + size - 1;
 				total += size;
@@ -691,7 +485,7 @@ static void __init pmem_setup_resource(void)
 	if (resource && pmemaddr && pmemlen) {
 		/* The address provided by bootloader is in kseg0. Convert to
 		 * a bus address. */
-		resource->start = phys_to_bus(pmemaddr - 0x80000000);
+		resource->start = phys_to_dma(pmemaddr - 0x80000000);
 		resource->end = resource->start + pmemlen - 1;
 
 		pr_info("persistent memory: start=0x%x  end=0x%x\n",
diff --git a/arch/mips/powertv/asic/prealloc-gaia.c b/arch/mips/powertv/asic/prealloc-gaia.c
new file mode 100644
index 00000000000..8ac8c7aeb98
--- /dev/null
+++ b/arch/mips/powertv/asic/prealloc-gaia.c
@@ -0,0 +1,589 @@
+/*
+ * Memory pre-allocations for Gaia boxes.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       David VomLehn
+ */
+
+#include <linux/init.h>
+#include <asm/mach-powertv/asic.h>
+
+/*
+ * DVR_CAPABLE GAIA RESOURCES
+ */
+struct resource dvr_gaia_resources[] __initdata = {
+	/*
+	 *
+	 * VIDEO1 / LX1
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x241FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24201FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory2",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x64180000 - 1,  /* 12 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x00280000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x64AD4000,
+		.end    = 0x64AD5000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * ITFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "ITFS",
+		.start  = 0x64180000,
+		/* 815,104 bytes each for 2 ITFS partitions. */
+		.end    = 0x6430DFFF,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x6430E000,
+		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
+		.end    = 0x64AD0000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "AvfsFileSys",
+		.start  = 0x64AD0000,
+		.end    = 0x64AD1000 - 1,  /* 4K */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x64AD1000,
+		.end    = 0x64AD3800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 * Add other resources here
+	 */
+	{ },
+};
+
+/*
+ * NON_DVR_CAPABLE GAIA RESOURCES
+ */
+struct resource non_dvr_gaia_resources[] __initdata = {
+	/*
+	 *
+	 * VIDEO1 / LX1
+	 *
+	 */
+	{
+		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
+		.start  = 0x24000000,
+		.end    = 0x241FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
+		.start  = 0x24200000,
+		.end    = 0x24201FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "MediaMemory1",
+		.start  = 0x24202000,
+		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * VIDEO2 / LX2
+	 *
+	 */
+	{
+		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
+		.start  = 0x60000000,
+		.end    = 0x601FFFFF,		/* 2MiB */
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
+		.start  = 0x60200000,
+		.end    = 0x60201FFF,
+		.flags  = IORESOURCE_IO,
+	},
+	{
+		.name   = "MediaMemory2",
+		.start  = 0x60202000,
+		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * Sysaudio Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  DSP_Image_Buff - DSP code and data images (1MB)
+	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
+	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
+	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
+	 *
+	 */
+	{
+		.name   = "DSP_Image_Buff",
+		.start  = 0x00000000,
+		.end    = 0x000FFFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_CPU_PCM_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00009FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_AUX_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "ADSC_Main_Buff",
+		.start  = 0x00000000,
+		.end    = 0x00003FFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * STAVEM driver/STAPI
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  This memory area is used for allocating buffers for Video decoding
+	 *  purposes.  Allocation/De-allocation within this buffer is managed
+	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
+	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
+	 *  video decoding purposes, for any video decoders on Zeus.
+	 *
+	 */
+	{
+		.name   = "AVMEMPartition0",
+		.start  = 0x63580000,
+		.end    = 0x64180000 - 1,  /* 12 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * DOCSIS Subsystem
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "Docsis",
+		.start  = 0x62000000,
+		.end    = 0x62700000 - 1,	/* 7 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * GHW HAL Driver
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  GraphicsHeap - PowerTV Graphics Heap
+	 *
+	 */
+	{
+		.name   = "GraphicsHeap",
+		.start  = 0x62700000,
+		.end    = 0x63500000 - 1,	/* 14 MB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * multi com buffer area
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "MulticomSHM",
+		.start  = 0x26000000,
+		.end    = 0x26020000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * DMA Ring buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Docsis -
+	 *
+	 */
+	{
+		.name   = "BMM_Buffer",
+		.start  = 0x00000000,
+		.end    = 0x000AA000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer for unit0
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit0
+	 *
+	 */
+	{
+		.name   = "DisplayBins0",
+		.start  = 0x00000000,
+		.end    = 0x00000FFF,		/* 4 KB total */
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Display bins buffer
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Display Bins for unit1
+	 *
+	 */
+	{
+		.name   = "DisplayBins1",
+		.start  = 0x64AD4000,
+		.end    = 0x64AD5000 - 1,  /* 4 KB total */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * AVFS: player HAL memory
+	 *
+	 *
+	 */
+	{
+		.name   = "AvfsDmaMem",
+		.start  = 0x6430E000,
+		.end    = 0x645D2C00 - 1,  /* 945K * 3 for playback */
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * PMEM
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Persistent memory for diagnostics.
+	 *
+	 */
+	{
+		.name   = "DiagPersistentMemory",
+		.start  = 0x00000000,
+		.end    = 0x10000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	/*
+	 *
+	 * Smartcard
+	 *
+	 * This driver requires:
+	 *
+	 * Arbitrary Based Buffers:
+	 *  Read and write buffers for Internal/External cards
+	 *
+	 */
+	{
+		.name   = "SmartCardInfo",
+		.start  = 0x64AD1000,
+		.end    = 0x64AD3800 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	/*
+	 *
+	 * KAVNET
+	 *    NP Reset Vector - must be of the form xxCxxxxx
+	 *	   NP Image - must be video bank 1
+	 *	   NP IPC - must be video bank 2
+	 */
+	{
+		.name   = "NP_Reset_Vector",
+		.start  = 0x27c00000,
+		.end    = 0x27c01000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_Image",
+		.start  = 0x27020000,
+		.end    = 0x27060000 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "NP_IPC",
+		.start  = 0x63500000,
+		.end    = 0x63580000 - 1,
+		.flags  = IORESOURCE_IO,
+	},
+	{ },
+};
diff --git a/arch/mips/powertv/init.c b/arch/mips/powertv/init.c
index 0afe227f1d0..83552288e80 100644
--- a/arch/mips/powertv/init.c
+++ b/arch/mips/powertv/init.c
@@ -117,8 +117,10 @@ void __init prom_init(void)
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	if (prom_argc == 1)
+	if (prom_argc == 1) {
+		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 		strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
+	}
 
 	configure_platform();
 	prom_meminit();
diff --git a/arch/mips/powertv/ioremap.c b/arch/mips/powertv/ioremap.c
new file mode 100644
index 00000000000..a77c6f62fe2
--- /dev/null
+++ b/arch/mips/powertv/ioremap.c
@@ -0,0 +1,136 @@
+/*
+ *			ioremap.c
+ *
+ * Support for mapping between dma_addr_t values a phys_addr_t values.
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       David VomLehn <dvomlehn@cisco.com>
+ *
+ * Description:  Defines the platform resources for the SA settop.
+ *
+ * NOTE: The bootloader allocates persistent memory at an address which is
+ * 16 MiB below the end of the highest address in KSEG0. All fixed
+ * address memory reservations must avoid this region.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/mach-powertv/ioremap.h>
+
+/*
+ * Define the sizes of and masks for grains in physical and DMA space. The
+ * values are the same but the types are not.
+ */
+#define IOR_PHYS_GRAIN		((phys_addr_t) 1 << IOR_LSBITS)
+#define IOR_PHYS_GRAIN_MASK	(IOR_PHYS_GRAIN - 1)
+
+#define IOR_DMA_GRAIN		((dma_addr_t) 1 << IOR_LSBITS)
+#define IOR_DMA_GRAIN_MASK	(IOR_DMA_GRAIN - 1)
+
+/*
+ * Values that, when accessed by an index derived from a phys_addr_t and
+ * added to phys_addr_t value, yield a DMA address
+ */
+struct ior_phys_to_dma _ior_phys_to_dma[IOR_NUM_PHYS_TO_DMA];
+EXPORT_SYMBOL(_ior_phys_to_dma);
+
+/*
+ * Values that, when accessed by an index derived from a dma_addr_t and
+ * added to that dma_addr_t value, yield a physical address
+ */
+struct ior_dma_to_phys _ior_dma_to_phys[IOR_NUM_DMA_TO_PHYS];
+EXPORT_SYMBOL(_ior_dma_to_phys);
+
+/**
+ * setup_dma_to_phys - set up conversion from DMA to physical addresses
+ * @dma_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
+ *		into the array _dma_to_phys.
+ * @delta:	Value that, when added to the DMA address, will yield the
+ *		physical address
+ * @s:		Number of bytes in the section of memory with the given delta
+ *		between DMA and physical addresses.
+ */
+static void setup_dma_to_phys(dma_addr_t dma, phys_addr_t delta, dma_addr_t s)
+{
+	int dma_idx, first_idx, last_idx;
+	phys_addr_t first, last;
+
+	/*
+	 * Calculate the first and last indices, rounding the first up and
+	 * the second down.
+	 */
+	first = dma & ~IOR_DMA_GRAIN_MASK;
+	last = (dma + s - 1) & ~IOR_DMA_GRAIN_MASK;
+	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
+	last_idx = last >> IOR_LSBITS;
+
+	for (dma_idx = first_idx; dma_idx <= last_idx; dma_idx++)
+		_ior_dma_to_phys[dma_idx].offset = delta >> IOR_DMA_SHIFT;
+}
+
+/**
+ * setup_phys_to_dma - set up conversion from DMA to physical addresses
+ * @phys_idx:	Top IOR_LSBITS bits of the DMA address, i.e. an index
+ *		into the array _phys_to_dma.
+ * @delta:	Value that, when added to the DMA address, will yield the
+ *		physical address
+ * @s:		Number of bytes in the section of memory with the given delta
+ *		between DMA and physical addresses.
+ */
+static void setup_phys_to_dma(phys_addr_t phys, dma_addr_t delta, phys_addr_t s)
+{
+	int phys_idx, first_idx, last_idx;
+	phys_addr_t first, last;
+
+	/*
+	 * Calculate the first and last indices, rounding the first up and
+	 * the second down.
+	 */
+	first = phys & ~IOR_PHYS_GRAIN_MASK;
+	last = (phys + s - 1) & ~IOR_PHYS_GRAIN_MASK;
+	first_idx = first >> IOR_LSBITS;		/* Convert to indices */
+	last_idx = last >> IOR_LSBITS;
+
+	for (phys_idx = first_idx; phys_idx <= last_idx; phys_idx++)
+		_ior_phys_to_dma[phys_idx].offset = delta >> IOR_PHYS_SHIFT;
+}
+
+/**
+ * ioremap_add_map - add to the physical and DMA address conversion arrays
+ * @phys:	Process's view of the address of the start of the memory chunk
+ * @dma:	DMA address of the start of the memory chunk
+ * @size:	Size, in bytes, of the chunk of memory
+ *
+ * NOTE: It might be obvious, but the assumption is that all @size bytes have
+ * the same offset between the physical address and the DMA address.
+ */
+void ioremap_add_map(phys_addr_t phys, phys_addr_t dma, phys_addr_t size)
+{
+	if (size == 0)
+		return;
+
+	if ((dma & IOR_DMA_GRAIN_MASK) != 0 ||
+		(phys & IOR_PHYS_GRAIN_MASK) != 0 ||
+		(size & IOR_PHYS_GRAIN_MASK) != 0)
+		pr_crit("Memory allocation must be in chunks of 0x%x bytes\n",
+			IOR_PHYS_GRAIN);
+
+	setup_dma_to_phys(dma, phys - dma, size);
+	setup_phys_to_dma(phys, dma - phys, size);
+}
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index f49eb3d0358..73880ad29bc 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -30,28 +30,141 @@
 #include <asm/sections.h>
 
 #include <asm/mips-boards/prom.h>
+#include <asm/mach-powertv/asic.h>
+#include <asm/mach-powertv/ioremap.h>
 
 #include "init.h"
 
 /* Memory constants */
 #define KIBIBYTE(n)		((n) * 1024)	/* Number of kibibytes */
 #define MEBIBYTE(n)		((n) * KIBIBYTE(1024)) /* Number of mebibytes */
-#define DEFAULT_MEMSIZE		MEBIBYTE(256)	/* If no memsize provided */
-#define LOW_MEM_MAX		MEBIBYTE(252)	/* Max usable low mem */
-#define RES_BOOTLDR_MEMSIZE	MEBIBYTE(1)	/* Memory reserved for bldr */
-#define BOOT_MEM_SIZE		KIBIBYTE(256)	/* Memory reserved for bldr */
-#define PHYS_MEM_START		0x10000000	/* Start of physical memory */
+#define DEFAULT_MEMSIZE		MEBIBYTE(128)	/* If no memsize provided */
 
-char __initdata cmdline[COMMAND_LINE_SIZE];
+#define BLDR_SIZE	KIBIBYTE(256)		/* Memory reserved for bldr */
+#define RV_SIZE		MEBIBYTE(4)		/* Size of reset vector */
 
-void __init prom_meminit(void)
+#define LOW_MEM_END	0x20000000		/* Highest low memory address */
+#define BLDR_ALIAS	0x10000000		/* Bootloader address */
+#define RV_PHYS		0x1fc00000		/* Reset vector address */
+#define LOW_RAM_END	RV_PHYS			/* End of real RAM in low mem */
+
+/*
+ * Very low-level conversion from processor physical address to device
+ * DMA address for the first bank of memory.
+ */
+#define PHYS_TO_DMA(paddr)	((paddr) + (CONFIG_LOW_RAM_DMA - LOW_RAM_ALIAS))
+
+unsigned long ptv_memsize;
+
+/*
+ * struct low_mem_reserved - Items in low memmory that are reserved
+ * @start:	Physical address of item
+ * @size:	Size, in bytes, of this item
+ * @is_aliased:	True if this is RAM aliased from another location. If false,
+ *		it is something other than aliased RAM and the RAM in the
+ *		unaliased address is still visible outside of low memory.
+ */
+struct low_mem_reserved {
+	phys_addr_t	start;
+	phys_addr_t	size;
+	bool		is_aliased;
+};
+
+/*
+ * Must be in ascending address order
+ */
+struct low_mem_reserved low_mem_reserved[] = {
+	{BLDR_ALIAS, BLDR_SIZE, true},	/* Bootloader RAM */
+	{RV_PHYS, RV_SIZE, false},	/* Reset vector */
+};
+
+/*
+ * struct mem_layout - layout of a piece of the system RAM
+ * @phys:	Physical address of the start of this piece of RAM. This is the
+ *		address at which both the processor and I/O devices see the
+ *		RAM.
+ * @alias:	Alias of this piece of memory in order to make it appear in
+ *		the low memory part of the processor's address space. I/O
+ *		devices don't see anything here.
+ * @size:	Size, in bytes, of this piece of RAM
+ */
+struct mem_layout {
+	phys_addr_t	phys;
+	phys_addr_t	alias;
+	phys_addr_t	size;
+};
+
+/*
+ * struct mem_layout_list - list descriptor for layouts of system RAM pieces
+ * @family:	Specifies the family being described
+ * @n:		Number of &struct mem_layout elements
+ * @layout:	Pointer to the list of &mem_layout structures
+ */
+struct mem_layout_list {
+	enum family_type	family;
+	size_t			n;
+	struct mem_layout	*layout;
+};
+
+static struct mem_layout f1500_layout[] = {
+	{0x20000000, 0x10000000, MEBIBYTE(256)},
+};
+
+static struct mem_layout f4500_layout[] = {
+	{0x40000000, 0x10000000, MEBIBYTE(256)},
+	{0x20000000, 0x20000000, MEBIBYTE(32)},
+};
+
+static struct mem_layout f8500_layout[] = {
+	{0x40000000, 0x10000000, MEBIBYTE(256)},
+	{0x20000000, 0x20000000, MEBIBYTE(32)},
+	{0x30000000, 0x30000000, MEBIBYTE(32)},
+};
+
+static struct mem_layout fx600_layout[] = {
+	{0x20000000, 0x10000000, MEBIBYTE(256)},
+	{0x60000000, 0x60000000, MEBIBYTE(128)},
+};
+
+static struct mem_layout_list layout_list[] = {
+	{FAMILY_1500, ARRAY_SIZE(f1500_layout), f1500_layout},
+	{FAMILY_1500VZE, ARRAY_SIZE(f1500_layout), f1500_layout},
+	{FAMILY_1500VZF, ARRAY_SIZE(f1500_layout), f1500_layout},
+	{FAMILY_4500, ARRAY_SIZE(f4500_layout), f4500_layout},
+	{FAMILY_8500, ARRAY_SIZE(f8500_layout), f8500_layout},
+	{FAMILY_8500RNG, ARRAY_SIZE(f8500_layout), f8500_layout},
+	{FAMILY_4600, ARRAY_SIZE(fx600_layout), fx600_layout},
+	{FAMILY_4600VZA, ARRAY_SIZE(fx600_layout), fx600_layout},
+	{FAMILY_8600, ARRAY_SIZE(fx600_layout), fx600_layout},
+	{FAMILY_8600VZB, ARRAY_SIZE(fx600_layout), fx600_layout},
+};
+
+/* If we can't determine the layout, use this */
+static struct mem_layout default_layout[] = {
+	{0x20000000, 0x10000000, MEBIBYTE(128)},
+};
+
+/**
+ * register_non_ram - register low memory not available for RAM usage
+ */
+static __init void register_non_ram(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(low_mem_reserved); i++)
+		add_memory_region(low_mem_reserved[i].start,
+			low_mem_reserved[i].size, BOOT_MEM_RESERVED);
+}
+
+/**
+ * get_memsize - get the size of memory as a single bank
+ */
+static phys_addr_t get_memsize(void)
 {
+	static char cmdline[COMMAND_LINE_SIZE] __initdata;
+	phys_addr_t memsize = 0;
 	char *memsize_str;
-	unsigned long memsize = 0;
-	unsigned int physend;
 	char *ptr;
-	int low_mem;
-	int high_mem;
 
 	/* Check the command line first for a memsize directive */
 	strcpy(cmdline, arcs_cmdline);
@@ -73,96 +186,156 @@ void __init prom_meminit(void)
 		if (memsize == 0) {
 			if (_prom_memsize != 0) {
 				memsize = _prom_memsize;
-				pr_info("_prom_memsize = 0x%lx\n", memsize);
+				pr_info("_prom_memsize = 0x%x\n", memsize);
 				/* add in memory that the bootloader doesn't
 				 * report */
-				memsize += BOOT_MEM_SIZE;
+				memsize += BLDR_SIZE;
 			} else {
 				memsize = DEFAULT_MEMSIZE;
 				pr_info("Memsize not passed by bootloader, "
-					"defaulting to 0x%lx\n", memsize);
+					"defaulting to 0x%x\n", memsize);
 			}
 		}
 	}
 
-	physend = PFN_ALIGN(&_end) - 0x80000000;
-	if (memsize > LOW_MEM_MAX) {
-		low_mem = LOW_MEM_MAX;
-		high_mem = memsize - low_mem;
-	} else {
-		low_mem = memsize;
-		high_mem = 0;
+	return memsize;
+}
+
+/**
+ * register_low_ram - register an aliased section of RAM
+ * @p:		Alias address of memory
+ * @n:		Number of bytes in this section of memory
+ *
+ * Returns the number of bytes registered
+ *
+ */
+static __init phys_addr_t register_low_ram(phys_addr_t p, phys_addr_t n)
+{
+	phys_addr_t s;
+	int i;
+	phys_addr_t orig_n;
+
+	orig_n = n;
+
+	BUG_ON(p + n > RV_PHYS);
+
+	for (i = 0; n != 0 && i < ARRAY_SIZE(low_mem_reserved); i++) {
+		phys_addr_t start;
+		phys_addr_t size;
+
+		start = low_mem_reserved[i].start;
+		size = low_mem_reserved[i].size;
+
+		/* Handle memory before this low memory section */
+		if (p < start) {
+			phys_addr_t s;
+			s = min(n, start - p);
+			add_memory_region(p, s, BOOT_MEM_RAM);
+			p += s;
+			n -= s;
+		}
+
+		/* Handle the low memory section itself. If it's aliased,
+		 * we reduce the number of byes left, but if not, the RAM
+		 * is available elsewhere and we don't reduce the number of
+		 * bytes remaining. */
+		if (p == start) {
+			if (low_mem_reserved[i].is_aliased) {
+				s = min(n, size);
+				n -= s;
+				p += s;
+			} else
+				p += n;
+		}
 	}
 
+	return orig_n - n;
+}
+
 /*
- * TODO: We will use the hard code for memory configuration until
- * the bootloader releases their device tree to us.
+ * register_ram - register real RAM
+ * @p:	Address of memory as seen by devices
+ * @alias:	If the memory is seen at an additional address by the processor,
+ *		this will be the address, otherwise it is the same as @p.
+ * @n:		Number of bytes in this section of memory
  */
+static __init void register_ram(phys_addr_t p, phys_addr_t alias,
+	phys_addr_t n)
+{
 	/*
-	 * Add the memory reserved for use by the bootloader to the
-	 * memory map.
-	 */
-	add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE,
-		BOOT_MEM_RESERVED);
-#ifdef CONFIG_HIGHMEM_256_128
-	/*
-	 * Add memory in low for general use by the kernel and its friends
-	 * (like drivers, applications, etc).
-	 */
-	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
-		LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
-	/*
-	 * Add the memory reserved for reset vector.
-	 */
-	add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
-	/*
-	 * Add the memory reserved.
-	 */
-	add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED);
-	/*
-	 * Add memory in high for general use by the kernel and its friends
-	 * (like drivers, applications, etc).
-	 *
-	 * 75MB is reserved for devices which are using the memory in high.
-	 */
-	add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
-		BOOT_MEM_RAM);
-#elif defined CONFIG_HIGHMEM_128_128
-	/*
-	 * Add memory in low for general use by the kernel and its friends
-	 * (like drivers, applications, etc).
-	 */
-	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
-		MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
-	/*
-	 * Add the memory reserved.
-	 */
-	add_memory_region(PHYS_MEM_START + MEBIBYTE(128),
-		MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED);
-	/*
-	 * Add memory in high for general use by the kernel and its friends
-	 * (like drivers, applications, etc).
-	 *
-	 * 75MB is reserved for devices which are using the memory in high.
-	 */
-	add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
-		BOOT_MEM_RAM);
-#else
-	/* Add low memory regions for either:
-	 *   - no-highmemory configuration case -OR-
-	 *   - highmemory "HIGHMEM_LOWBANK_ONLY" case
-	 */
-	/*
-	 * Add memory for general use by the kernel and its friends
-	 * (like drivers, applications, etc).
+	 * If some or all of this memory has an alias, break it into the
+	 * aliased and non-aliased portion.
 	 */
-	add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
-		low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
+	if (p != alias) {
+		phys_addr_t alias_size;
+		phys_addr_t registered;
+
+		alias_size = min(n, LOW_RAM_END - alias);
+		registered = register_low_ram(alias, alias_size);
+		ioremap_add_map(alias, p, n);
+		n -= registered;
+		p += registered;
+	}
+
+#ifdef CONFIG_HIGHMEM
+	if (n != 0) {
+		add_memory_region(p, n, BOOT_MEM_RAM);
+		ioremap_add_map(p, p, n);
+	}
+#endif
+}
+
+/**
+ * register_address_space - register things in the address space
+ * @memsize:	Number of bytes of RAM installed
+ *
+ * Takes the given number of bytes of RAM and registers as many of the regions,
+ * or partial regions, as it can. So, the default configuration might have
+ * two regions with 256 MiB each. If the memsize passed in on the command line
+ * is 384 MiB, it will register the first region with 256 MiB and the second
+ * with 128 MiB.
+ */
+static __init void register_address_space(phys_addr_t memsize)
+{
+	int i;
+	phys_addr_t size;
+	size_t n;
+	struct mem_layout *layout;
+	enum family_type family;
+
 	/*
-	 * Add the memory reserved for reset vector.
+	 * Register all of the things that aren't available to the kernel as
+	 * memory.
 	 */
-	add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
-#endif
+	register_non_ram();
+
+	/* Find the appropriate memory description */
+	family = platform_get_family();
+
+	for (i = 0; i < ARRAY_SIZE(layout_list); i++) {
+		if (layout_list[i].family == family)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(layout_list)) {
+		n = ARRAY_SIZE(default_layout);
+		layout = default_layout;
+	} else {
+		n = layout_list[i].n;
+		layout = layout_list[i].layout;
+	}
+
+	for (i = 0; memsize != 0 && i < n; i++) {
+		size = min(memsize, layout[i].size);
+		register_ram(layout[i].phys, layout[i].alias, size);
+		memsize -= size;
+	}
+}
+
+void __init prom_meminit(void)
+{
+	ptv_memsize = get_memsize();
+	register_address_space(ptv_memsize);
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/powertv/powertv-usb.c b/arch/mips/powertv/powertv-usb.c
new file mode 100644
index 00000000000..6ac85cf7aa2
--- /dev/null
+++ b/arch/mips/powertv/powertv-usb.c
@@ -0,0 +1,403 @@
+/*
+ *				powertv-usb.c
+ *
+ * Description:  ASIC-specific USB device setup and shutdown
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Author:       Ken Eppinett
+ *               David Schleef <ds@schleef.org>
+ *
+ * NOTE: The bootloader allocates persistent memory at an address which is
+ * 16 MiB below the end of the highest address in KSEG0. All fixed
+ * address memory reservations must avoid this region.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <asm/mach-powertv/asic.h>
+#include <asm/mach-powertv/interrupts.h>
+
+/* misc_clk_ctl1 values */
+#define MCC1_30MHZ_POWERUP_SELECT	(1 << 14)
+#define MCC1_DIV9			(1 << 13)
+#define MCC1_ETHMIPS_POWERUP_SELECT	(1 << 11)
+#define MCC1_USB_POWERUP_SELECT		(1 << 1)
+#define MCC1_CLOCK108_POWERUP_SELECT	(1 << 0)
+
+/* Possible values for clock select */
+#define MCC1_USB_CLOCK_HIGH_Z		(0 << 4)
+#define MCC1_USB_CLOCK_48MHZ		(1 << 4)
+#define MCC1_USB_CLOCK_24MHZ		(2 << 4)
+#define MCC1_USB_CLOCK_6MHZ		(3 << 4)
+
+#define MCC1_CONFIG	(MCC1_30MHZ_POWERUP_SELECT |		\
+			 MCC1_DIV9 |				\
+			 MCC1_ETHMIPS_POWERUP_SELECT |		\
+			 MCC1_USB_POWERUP_SELECT |		\
+			 MCC1_CLOCK108_POWERUP_SELECT)
+
+/* misc_clk_ctl2 values */
+#define MCC2_GMII_GCLK_TO_PAD		(1 << 31)
+#define MCC2_ETHER125_0_CLOCK_SELECT	(1 << 29)
+#define MCC2_RMII_0_CLOCK_SELECT	(1 << 28)
+#define MCC2_GMII_TX0_CLOCK_SELECT	(1 << 27)
+#define MCC2_GMII_RX0_CLOCK_SELECT	(1 << 26)
+#define MCC2_ETHER125_1_CLOCK_SELECT	(1 << 24)
+#define MCC2_RMII_1_CLOCK_SELECT	(1 << 23)
+#define MCC2_GMII_TX1_CLOCK_SELECT	(1 << 22)
+#define MCC2_GMII_RX1_CLOCK_SELECT	(1 << 21)
+#define MCC2_ETHER125_2_CLOCK_SELECT	(1 << 19)
+#define MCC2_RMII_2_CLOCK_SELECT	(1 << 18)
+#define MCC2_GMII_TX2_CLOCK_SELECT	(1 << 17)
+#define MCC2_GMII_RX2_CLOCK_SELECT	(1 << 16)
+
+#define ETHER_CLK_CONFIG	(MCC2_GMII_GCLK_TO_PAD |	\
+				 MCC2_ETHER125_0_CLOCK_SELECT |	\
+				 MCC2_RMII_0_CLOCK_SELECT |	\
+				 MCC2_GMII_TX0_CLOCK_SELECT |	\
+				 MCC2_GMII_RX0_CLOCK_SELECT |	\
+				 MCC2_ETHER125_1_CLOCK_SELECT |	\
+				 MCC2_RMII_1_CLOCK_SELECT |	\
+				 MCC2_GMII_TX1_CLOCK_SELECT |	\
+				 MCC2_GMII_RX1_CLOCK_SELECT |	\
+				 MCC2_ETHER125_2_CLOCK_SELECT |	\
+				 MCC2_RMII_2_CLOCK_SELECT |	\
+				 MCC2_GMII_TX2_CLOCK_SELECT |	\
+				 MCC2_GMII_RX2_CLOCK_SELECT)
+
+/* misc_clk_ctl2 definitions for Gaia */
+#define FSX4A_REF_SELECT		(1 << 16)
+#define FSX4B_REF_SELECT		(1 << 17)
+#define FSX4C_REF_SELECT		(1 << 18)
+#define DDR_PLL_REF_SELECT		(1 << 19)
+#define MIPS_PLL_REF_SELECT		(1 << 20)
+
+/* Definitions for the QAM frequency select register FS432X4A4_QAM_CTL */
+#define QAM_FS_SDIV_SHIFT		29
+#define QAM_FS_MD_SHIFT			24
+#define QAM_FS_MD_MASK			0x1f	/* Cut down to 5 bits */
+#define QAM_FS_PE_SHIFT			8
+
+#define QAM_FS_DISABLE_DIVIDE_BY_3		(1 << 5)
+#define QAM_FS_ENABLE_PROGRAM			(1 << 4)
+#define	QAM_FS_ENABLE_OUTPUT			(1 << 3)
+#define	QAM_FS_SELECT_TEST_BYPASS		(1 << 2)
+#define	QAM_FS_DISABLE_DIGITAL_STANDBY		(1 << 1)
+#define QAM_FS_CHOOSE_FS			(1 << 0)
+
+/* Definitions for fs432x4a_ctl register */
+#define QAM_FS_NSDIV_54MHZ			(1 << 2)
+
+/* Definitions for bcm1_usb2_ctl register */
+#define BCM1_USB2_CTL_BISTOK				(1 << 11)
+#define BCM1_USB2_CTL_PORT2_SHIFT_JK			(1 << 7)
+#define BCM1_USB2_CTL_PORT1_SHIFT_JK			(1 << 6)
+#define BCM1_USB2_CTL_PORT2_FAST_EDGE			(1 << 5)
+#define BCM1_USB2_CTL_PORT1_FAST_EDGE			(1 << 4)
+#define BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH		(1 << 1)
+#define BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH	(1 << 0)
+
+/* Definitions for crt_spare register */
+#define CRT_SPARE_PORT2_SHIFT_JK			(1 << 21)
+#define CRT_SPARE_PORT1_SHIFT_JK			(1 << 20)
+#define CRT_SPARE_PORT2_FAST_EDGE			(1 << 19)
+#define CRT_SPARE_PORT1_FAST_EDGE			(1 << 18)
+#define CRT_SPARE_DIVIDE_BY_9_FROM_432			(1 << 17)
+#define CRT_SPARE_USB_DIVIDE_BY_9			(1 << 16)
+
+/* Definitions for usb2_stbus_obc register */
+#define USB_STBUS_OBC_STORE32_LOAD32			0x3
+
+/* Definitions for usb2_stbus_mess_size register */
+#define USB2_STBUS_MESS_SIZE_2				0x1	/* 2 packets */
+
+/* Definitions for usb2_stbus_chunk_size register */
+#define USB2_STBUS_CHUNK_SIZE_2				0x1	/* 2 packets */
+
+/* Definitions for usb2_strap register */
+#define USB2_STRAP_HFREQ_SELECT				0x1
+
+/*
+ * USB Host Resource Definition
+ */
+
+static struct resource ehci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbehci,
+		.end    = irq_usbehci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = 0xffffffffULL;
+
+static struct platform_device ehci_device = {
+	.name = "powertv-ehci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ehci_resources,
+	.dev = {
+		.dma_mask = &ehci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+static struct resource ohci_resources[] = {
+	{
+		.parent = &asic_resource,
+		.start  = 0,
+		.end    = 0xff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = irq_usbohci,
+		.end    = irq_usbohci,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 ohci_dmamask = 0xffffffffULL;
+
+static struct platform_device ohci_device = {
+	.name = "powertv-ohci",
+	.id = 0,
+	.num_resources = 2,
+	.resource = ohci_resources,
+	.dev = {
+		.dma_mask = &ohci_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+static unsigned usb_users;
+static DEFINE_SPINLOCK(usb_regs_lock);
+
+/*
+ *
+ * fs_update - set frequency synthesizer for USB
+ * @pe_bits		Phase tap setting
+ * @md_bits		Coarse selector bus for algorithm of phase tap
+ * @sdiv_bits		Output divider setting
+ * @disable_div_by_3	Either QAM_FS_DISABLE_DIVIDE_BY_3 or zero
+ * @standby		Either QAM_FS_DISABLE_DIGITAL_STANDBY or zero
+ *
+ * QAM frequency selection code, which affects the frequency at which USB
+ * runs. The frequency is calculated as:
+ *                             2^15 * ndiv * Fin
+ * Fout = ------------------------------------------------------------
+ *        (sdiv * (ipe * (1 + md/32) - (ipe - 2^15)*(1 + (md + 1)/32)))
+ * where:
+ * Fin		54 MHz
+ * ndiv		QAM_FS_NSDIV_54MHZ ? 8 : 16
+ * sdiv		1 << (sdiv_bits + 1)
+ * ipe		Same as pe_bits
+ * md		A five-bit, two's-complement integer (range [-16, 15]), which
+ *		is the lower 5 bits of md_bits.
+ */
+static void fs_update(u32 pe_bits, int md_bits, u32 sdiv_bits,
+	u32 disable_div_by_3, u32 standby)
+{
+	u32 val;
+
+	val = ((sdiv_bits << QAM_FS_SDIV_SHIFT) |
+		((md_bits & QAM_FS_MD_MASK) << QAM_FS_MD_SHIFT) |
+		(pe_bits << QAM_FS_PE_SHIFT) |
+		QAM_FS_ENABLE_OUTPUT |
+		standby |
+		disable_div_by_3);
+	asic_write(val, fs432x4b4_usb_ctl);
+	asic_write(val | QAM_FS_ENABLE_PROGRAM, fs432x4b4_usb_ctl);
+	asic_write(val | QAM_FS_ENABLE_PROGRAM | QAM_FS_CHOOSE_FS,
+		fs432x4b4_usb_ctl);
+}
+
+/*
+ * usb_eye_configure - for optimizing the shape USB eye waveform
+ * @set:	Bits to set in the register
+ * @clear:	Bits to clear in the register; each bit with a one will
+ *		be set in the register, zero bits will not be modified
+ */
+static void usb_eye_configure(u32 set, u32 clear)
+{
+	u32 old;
+
+	old = asic_read(crt_spare);
+	old |= set;
+	old &= ~clear;
+	asic_write(old, crt_spare);
+}
+
+/*
+ * platform_configure_usb - usb configuration based on platform type.
+ */
+static void platform_configure_usb(void)
+{
+	u32 bcm1_usb2_ctl_value;
+	enum asic_type asic_type;
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb_regs_lock, flags);
+	usb_users++;
+
+	if (usb_users != 1) {
+		spin_unlock_irqrestore(&usb_regs_lock, flags);
+		return;
+	}
+
+	asic_type = platform_get_asic();
+
+	switch (asic_type) {
+	case ASIC_ZEUS:
+		fs_update(0x0000, -15, 0x02, 0, 0);
+		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
+			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
+		break;
+
+	case ASIC_CRONUS:
+	case ASIC_CRONUSLITE:
+		usb_eye_configure(0, CRT_SPARE_USB_DIVIDE_BY_9);
+		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
+			QAM_FS_DISABLE_DIGITAL_STANDBY);
+		bcm1_usb2_ctl_value = BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
+			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
+		break;
+
+	case ASIC_CALLIOPE:
+		fs_update(0x0000, -15, 0x02, QAM_FS_DISABLE_DIVIDE_BY_3,
+			QAM_FS_DISABLE_DIGITAL_STANDBY);
+
+		switch (platform_get_family()) {
+		case FAMILY_1500VZE:
+			break;
+
+		case FAMILY_1500VZF:
+			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
+				CRT_SPARE_PORT1_SHIFT_JK |
+				CRT_SPARE_PORT2_FAST_EDGE |
+				CRT_SPARE_PORT1_FAST_EDGE, 0);
+			break;
+
+		default:
+			usb_eye_configure(CRT_SPARE_PORT2_SHIFT_JK |
+				CRT_SPARE_PORT1_SHIFT_JK, 0);
+			break;
+		}
+
+		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
+			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
+			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
+		break;
+
+	case ASIC_GAIA:
+		fs_update(0x8000, -14, 0x03, QAM_FS_DISABLE_DIVIDE_BY_3,
+			QAM_FS_DISABLE_DIGITAL_STANDBY);
+		bcm1_usb2_ctl_value = BCM1_USB2_CTL_BISTOK |
+			BCM1_USB2_CTL_EHCI_PRT_PWR_ACTIVE_HIGH |
+			BCM1_USB2_CTL_APP_PRT_OVRCUR_IN_ACTIVE_HIGH;
+		break;
+
+	default:
+		pr_err("Unknown ASIC type: %d\n", asic_type);
+		bcm1_usb2_ctl_value = 0;
+		break;
+	}
+
+	/* turn on USB power */
+	asic_write(0, usb2_strap);
+	/* Enable all OHCI interrupts */
+	asic_write(bcm1_usb2_ctl_value, usb2_control);
+	/* usb2_stbus_obc store32/load32 */
+	asic_write(USB_STBUS_OBC_STORE32_LOAD32, usb2_stbus_obc);
+	/* usb2_stbus_mess_size 2 packets */
+	asic_write(USB2_STBUS_MESS_SIZE_2, usb2_stbus_mess_size);
+	/* usb2_stbus_chunk_size 2 packets */
+	asic_write(USB2_STBUS_CHUNK_SIZE_2, usb2_stbus_chunk_size);
+	spin_unlock_irqrestore(&usb_regs_lock, flags);
+}
+
+static void platform_unconfigure_usb(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb_regs_lock, flags);
+	usb_users--;
+	if (usb_users == 0)
+		asic_write(USB2_STRAP_HFREQ_SELECT, usb2_strap);
+	spin_unlock_irqrestore(&usb_regs_lock, flags);
+}
+
+/*
+ * Set up the USB EHCI interface
+ */
+void platform_configure_usb_ehci()
+{
+	platform_configure_usb();
+}
+EXPORT_SYMBOL(platform_configure_usb_ehci);
+
+/*
+ * Set up the USB OHCI interface
+ */
+void platform_configure_usb_ohci()
+{
+	platform_configure_usb();
+}
+EXPORT_SYMBOL(platform_configure_usb_ohci);
+
+/*
+ * Shut the USB EHCI interface down
+ */
+void platform_unconfigure_usb_ehci()
+{
+	platform_unconfigure_usb();
+}
+EXPORT_SYMBOL(platform_unconfigure_usb_ehci);
+
+/*
+ * Shut the USB OHCI interface down
+ */
+void platform_unconfigure_usb_ohci()
+{
+	platform_unconfigure_usb();
+}
+EXPORT_SYMBOL(platform_unconfigure_usb_ohci);
+
+/**
+ * platform_devices_init - sets up USB device resourse.
+ */
+int __init platform_usb_devices_init(struct platform_device **ehci_dev,
+	struct platform_device **ohci_dev)
+{
+	*ehci_dev = &ehci_device;
+	ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
+	ehci_resources[0].end += ehci_resources[0].start;
+
+	*ohci_dev = &ohci_device;
+	ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
+	ohci_resources[0].end += ohci_resources[0].start;
+
+	return 0;
+}
diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c
index af2cae0a5ab..3933c373a43 100644
--- a/arch/mips/powertv/powertv_setup.c
+++ b/arch/mips/powertv/powertv_setup.c
@@ -199,14 +199,8 @@ static int panic_handler(struct notifier_block *notifier_block,
 		my_regs.cp0_status = read_c0_status();
 	}
 
-#ifdef CONFIG_DIAGNOSTICS
-	failure_report((char *) cause_string,
-		have_die_regs ? &die_regs : &my_regs);
-	have_die_regs = false;
-#else
 	pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
 		"zzzz... \n");
-#endif
 
 	return NOTIFY_DONE;
 }
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
index 8f0b6b6a162..efdecdb6e3e 100644
--- a/arch/mips/rb532/Makefile
+++ b/arch/mips/rb532/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/Platform b/arch/mips/rb532/Platform
new file mode 100644
index 00000000000..aeec45a7cbb
--- /dev/null
+++ b/arch/mips/rb532/Platform
@@ -0,0 +1,7 @@
+#
+# Routerboard 532
+#
+platform-$(CONFIG_MIKROTIK_RB532)	+= rb532/
+cflags-$(CONFIG_MIKROTIK_RB532)		+=				\
+		-I$(srctree)/arch/mips/include/asm/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532)		+= 0xffffffff80101000
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index 416b18f9fa7..cc538493cae 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -9,5 +9,3 @@ obj-y	+= ip22-mc.o ip22-hpc.o ip22-int.o ip22-time.o ip22-nvram.o \
 obj-$(CONFIG_SGI_IP22) += ip22-berr.o
 obj-$(CONFIG_SGI_IP28) += ip28-berr.o
 obj-$(CONFIG_EISA)	+= ip22-eisa.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip22/Platform b/arch/mips/sgi-ip22/Platform
new file mode 100644
index 00000000000..b7a4b7e04c3
--- /dev/null
+++ b/arch/mips/sgi-ip22/Platform
@@ -0,0 +1,34 @@
+#
+# SGI IP22 (Indy/Indigo2)
+#
+# Set the load address to >= 0xffffffff88069000 if you want to leave space for
+# symmon, 0xffffffff80002000 for production kernels.  Note that the value must
+# be aligned to a multiple of the kernel stack size or the handling of the
+# current variable will break so for 64-bit kernels we have to raise the start
+# address by 8kb.
+#
+platform-$(CONFIG_SGI_IP22)		+= sgi-ip22/
+cflags-$(CONFIG_SGI_IP22)	+= -I$(srctree)/arch/mips/include/asm/mach-ip22
+ifdef CONFIG_32BIT
+load-$(CONFIG_SGI_IP22)		+= 0xffffffff88002000
+endif
+ifdef CONFIG_64BIT
+load-$(CONFIG_SGI_IP22)		+= 0xffffffff88004000
+endif
+
+#
+# SGI IP28 (Indigo2 R10k)
+#
+# Set the load address to >= 0xa800000020080000 if you want to leave space for
+# symmon, 0xa800000020004000 for production kernels ?  Note that the value must
+# be 16kb aligned or the handling of the current variable will break.
+# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
+#
+ifdef CONFIG_SGI_IP28
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
+  endif
+endif
+platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
+cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
+load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 31f4931b848..1f29e761d69 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -8,5 +8,3 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/Platform b/arch/mips/sgi-ip27/Platform
new file mode 100644
index 00000000000..1fb9c2ea7c8
--- /dev/null
+++ b/arch/mips/sgi-ip27/Platform
@@ -0,0 +1,19 @@
+#
+# SGI-IP27 (Origin200/2000)
+#
+# Set the load address to >= 0xc000000000300000 if you want to leave space for
+# symmon, 0xc00000000001c000 for production kernels.  Note that the value must
+# be 16kb aligned or the handling of the current variable will break.
+#
+ifdef CONFIG_SGI_IP27
+platform-$(CONFIG_SGI_IP27)	+= sgi-ip27/
+cflags-$(CONFIG_SGI_IP27)	+= -I$(srctree)/arch/mips/include/asm/mach-ip27
+ifdef CONFIG_MAPPED_KERNEL
+load-$(CONFIG_SGI_IP27)		+= 0xc00000004001c000
+OBJCOPYFLAGS			:= --change-addresses=0x3fffffff80000000
+dataoffset-$(CONFIG_SGI_IP27)	+= 0x01000000
+else
+load-$(CONFIG_SGI_IP27)		+= 0xa80000000001c000
+OBJCOPYFLAGS			:= --change-addresses=0x57ffffff80000000
+endif
+endif
diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c
index dd830b3670d..7afe1468800 100644
--- a/arch/mips/sgi-ip27/ip27-klconfig.c
+++ b/arch/mips/sgi-ip27/ip27-klconfig.c
@@ -48,7 +48,7 @@ klinfo_t *find_first_component(lboard_t *brd, unsigned char struct_type)
 	return find_component(brd, (klinfo_t *)NULL, struct_type);
 }
 
-lboard_t * find_lboard(lboard_t *start, unsigned char brd_type)
+lboard_t *find_lboard(lboard_t *start, unsigned char brd_type)
 {
 	/* Search all boards stored on this node. */
 	while (start) {
@@ -60,7 +60,7 @@ lboard_t * find_lboard(lboard_t *start, unsigned char brd_type)
 	return (lboard_t *)NULL;
 }
 
-lboard_t * find_lboard_class(lboard_t *start, unsigned char brd_type)
+lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_type)
 {
 	/* Search all boards stored on this node. */
 	while (start) {
@@ -78,7 +78,7 @@ cnodeid_t get_cpu_cnode(cpuid_t cpu)
 	return CPUID_TO_COMPACT_NODEID(cpu);
 }
 
-klcpu_t * nasid_slice_to_cpuinfo(nasid_t nasid, int slice)
+klcpu_t *nasid_slice_to_cpuinfo(nasid_t nasid, int slice)
 {
 	lboard_t *brd;
 	klcpu_t *acpu;
@@ -97,7 +97,7 @@ klcpu_t * nasid_slice_to_cpuinfo(nasid_t nasid, int slice)
 	return (klcpu_t *)NULL;
 }
 
-klcpu_t * sn_get_cpuinfo(cpuid_t cpu)
+klcpu_t *sn_get_cpuinfo(cpuid_t cpu)
 {
 	nasid_t nasid;
 	int slice;
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 31c9aa1bcb4..60f0227425e 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -5,5 +5,3 @@
 
 obj-y	+= ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
 	   crime.o ip32-memory.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip32/Platform b/arch/mips/sgi-ip32/Platform
new file mode 100644
index 00000000000..0fea556f364
--- /dev/null
+++ b/arch/mips/sgi-ip32/Platform
@@ -0,0 +1,11 @@
+#
+# SGI-IP32 (O2)
+#
+# Set the load address to >= 80069000 if you want to leave space for symmon,
+# 0xffffffff80004000 for production kernels.  Note that the value must be aligned to
+# a multiple of the kernel stack size or the handling of the current variable
+# will break.
+#
+platform-$(CONFIG_SGI_IP32)	+= sgi-ip32/
+cflags-$(CONFIG_SGI_IP32)	+= -I$(srctree)/arch/mips/include/asm/mach-ip32
+load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile
new file mode 100644
index 00000000000..c8ed2c807e6
--- /dev/null
+++ b/arch/mips/sibyte/Makefile
@@ -0,0 +1,27 @@
+#
+# Sibyte SB1250 / BCM1480 family of SOCs
+#
+obj-$(CONFIG_SIBYTE_BCM112X)	+= sb1250/
+obj-$(CONFIG_SIBYTE_BCM112X)	+= common/
+obj-$(CONFIG_SIBYTE_SB1250)	+= sb1250/
+obj-$(CONFIG_SIBYTE_SB1250)	+= common/
+obj-$(CONFIG_SIBYTE_BCM1x55)	+= bcm1480/
+obj-$(CONFIG_SIBYTE_BCM1x55)	+= common/
+obj-$(CONFIG_SIBYTE_BCM1x80)	+= bcm1480/
+obj-$(CONFIG_SIBYTE_BCM1x80)	+= common/
+
+#
+# Sibyte BCM91120x (Carmel) board
+# Sibyte BCM91120C (CRhine) board
+# Sibyte BCM91125C (CRhone) board
+# Sibyte BCM91125E (Rhone) board
+# Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
+#
+obj-$(CONFIG_SIBYTE_CARMEL)	+= swarm/
+obj-$(CONFIG_SIBYTE_CRHINE)	+= swarm/
+obj-$(CONFIG_SIBYTE_CRHONE)	+= swarm/
+obj-$(CONFIG_SIBYTE_RHONE)	+= swarm/
+obj-$(CONFIG_SIBYTE_SENTOSA)	+= swarm/
+obj-$(CONFIG_SIBYTE_SWARM)	+= swarm/
+obj-$(CONFIG_SIBYTE_BIGSUR)	+= swarm/
diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
new file mode 100644
index 00000000000..911dfe39c63
--- /dev/null
+++ b/arch/mips/sibyte/Platform
@@ -0,0 +1,43 @@
+#
+# These are all rather similar so we consider them a single platform
+#
+platform-$(CONFIG_SIBYTE_BCM112X)	+= sibyte/
+platform-$(CONFIG_SIBYTE_SB1250)	+= sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x55)	+= sibyte/
+platform-$(CONFIG_SIBYTE_BCM1x80)	+= sibyte/
+
+#
+# Sibyte SB1250 / BCM1480 family of SOCs
+#
+cflags-$(CONFIG_SIBYTE_BCM112X)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
+		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+platform-$(CONFIG_SIBYTE_SB1250)	+= sibyte/
+cflags-$(CONFIG_SIBYTE_SB1250)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
+		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+cflags-$(CONFIG_SIBYTE_BCM1x55)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
+		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+cflags-$(CONFIG_SIBYTE_BCM1x80)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-sibyte		\
+		-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+#
+# Sibyte BCM91120x (Carmel) board
+# Sibyte BCM91120C (CRhine) board
+# Sibyte BCM91125C (CRhone) board
+# Sibyte BCM91125E (Rhone) board
+# Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
+#
+load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
+load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
index f292f7df0cf..cdc4c56c3e2 100644
--- a/arch/mips/sibyte/bcm1480/Makefile
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -1,5 +1,3 @@
 obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile
index 4f659837c7c..36aa700cc40 100644
--- a/arch/mips/sibyte/common/Makefile
+++ b/arch/mips/sibyte/common/Makefile
@@ -1,5 +1,3 @@
 obj-y := cfe.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index 1896f4e77a3..d3d969de407 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -2,5 +2,3 @@ obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index a7dbeebe7fe..9d3bad3200c 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -4,5 +4,3 @@
 
 obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o
 obj-$(CONFIG_EISA) += eisa.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sni/Platform b/arch/mips/sni/Platform
new file mode 100644
index 00000000000..2644a9d63c0
--- /dev/null
+++ b/arch/mips/sni/Platform
@@ -0,0 +1,11 @@
+#
+# SNI RM
+#
+platform-$(CONFIG_SNI_RM)		+= sni/
+cflags-$(CONFIG_SNI_RM)		+= -I$(srctree)/arch/mips/include/asm/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
+endif
+all-$(CONFIG_SNI_RM)		:= $(COMPRESSION_FNAME).ecoff
diff --git a/arch/mips/txx9/Makefile b/arch/mips/txx9/Makefile
new file mode 100644
index 00000000000..34787dabff0
--- /dev/null
+++ b/arch/mips/txx9/Makefile
@@ -0,0 +1,17 @@
+#
+# Common TXx9
+#
+obj-$(CONFIG_MACH_TX39XX)      += generic/
+obj-$(CONFIG_MACH_TX49XX)      += generic/
+
+#
+# Toshiba JMR-TX3927 board
+#
+obj-$(CONFIG_TOSHIBA_JMR3927)  += jmr3927/
+
+#
+# Toshiba RBTX49XX boards
+#
+obj-$(CONFIG_TOSHIBA_RBTX4927) += rbtx4927/
+obj-$(CONFIG_TOSHIBA_RBTX4938) += rbtx4938/
+obj-$(CONFIG_TOSHIBA_RBTX4939) += rbtx4939/
diff --git a/arch/mips/txx9/Platform b/arch/mips/txx9/Platform
new file mode 100644
index 00000000000..a801abbe138
--- /dev/null
+++ b/arch/mips/txx9/Platform
@@ -0,0 +1,10 @@
+platform-$(CONFIG_MACH_TX39XX)	+= txx9/
+platform-$(CONFIG_MACH_TX49XX)	+= txx9/
+
+cflags-$(CONFIG_MACH_TX39XX)	+=					\
+		-I$(srctree)/arch/mips/include/asm/mach-tx39xx
+cflags-$(CONFIG_MACH_TX49XX)	+=					\
+		 -I$(srctree)/arch/mips/include/asm/mach-tx49xx
+
+load-$(CONFIG_MACH_TX39XX)      += 0xffffffff80050000
+load-$(CONFIG_MACH_TX49XX)      += 0xffffffff80100000
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
index f2579ce054a..1863c167e66 100644
--- a/arch/mips/txx9/generic/Makefile
+++ b/arch/mips/txx9/generic/Makefile
@@ -11,5 +11,3 @@ obj-$(CONFIG_SOC_TX4939)	+= setup_tx4939.o irq_tx4939.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
 obj-$(CONFIG_SPI)		+= spi_eeprom.o
 obj-$(CONFIG_TXX9_7SEGLED)	+= 7segled.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
index 20d61ac543e..9f5d5b62383 100644
--- a/arch/mips/txx9/jmr3927/Makefile
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile
index f3e1f597b4f..60b24c8f7e6 100644
--- a/arch/mips/txx9/rbtx4927/Makefile
+++ b/arch/mips/txx9/rbtx4927/Makefile
@@ -1,3 +1 @@
 obj-y	+= prom.o setup.o irq.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
index f3e1f597b4f..60b24c8f7e6 100644
--- a/arch/mips/txx9/rbtx4938/Makefile
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -1,3 +1 @@
 obj-y	+= prom.o setup.o irq.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4939/Makefile b/arch/mips/txx9/rbtx4939/Makefile
index 3232cd03a7d..5c84625a3f1 100644
--- a/arch/mips/txx9/rbtx4939/Makefile
+++ b/arch/mips/txx9/rbtx4939/Makefile
@@ -1,3 +1 @@
 obj-y	 += irq.o setup.o prom.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/vr41xx/Platform b/arch/mips/vr41xx/Platform
new file mode 100644
index 00000000000..b6c8d5c08dd
--- /dev/null
+++ b/arch/mips/vr41xx/Platform
@@ -0,0 +1,32 @@
+#
+# NEC VR4100 series based machines
+#
+platform-$(CONFIG_MACH_VR41XX)	+= vr41xx/common/
+cflags-$(CONFIG_MACH_VR41XX)	+= -I$(srctree)/arch/mips/include/asm/mach-vr41xx
+
+#
+# CASIO CASSIPEIA E-55/65 (VR4111)
+#
+platform-$(CONFIG_CASIO_E55)	+= vr41xx/casio-e55/
+load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
+
+#
+# IBM WorkPad z50 (VR4121)
+#
+platform-$(CONFIG_IBM_WORKPAD)	+= vr41xx/ibm-workpad/
+load-$(CONFIG_IBM_WORKPAD)	+= 0xffffffff80004000
+
+#
+# TANBAC VR4131 multichip module(TB0225) and TANBAC VR4131DIMM(TB0229) (VR4131)
+#
+load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
+
+#
+# Victor MP-C303/304 (VR4122)
+#
+load-$(CONFIG_VICTOR_MPC30X)	+= 0xffffffff80001000
+
+#
+# ZAO Networks Capcella (VR4131)
+#
+load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile
index 7d5d83b8c58..d0d84ec8d63 100644
--- a/arch/mips/vr41xx/common/Makefile
+++ b/arch/mips/vr41xx/common/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	+= bcu.o cmu.o giu.o icu.o init.o irq.o pmu.o rtc.o siu.o type.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/gt64120/wrppmc/Makefile b/arch/mips/wrppmc/Makefile
index b49d282bee8..307cc6920ce 100644
--- a/arch/mips/gt64120/wrppmc/Makefile
+++ b/arch/mips/wrppmc/Makefile
@@ -6,9 +6,7 @@
 # Copyright 2006 Wind River System, Inc.
 # Author: Rongkai.Zhan <rongkai.zhan@windriver.com>
 #
-# Makefile for the Wind River MIPS 4KC PPMC Eval Board
+# Makefile for the Wind River MIPS 4Kc PPMC Eval Board
 #
 
 obj-y += irq.o pci.o reset.o serial.o setup.o time.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/wrppmc/Platform b/arch/mips/wrppmc/Platform
new file mode 100644
index 00000000000..e758645e968
--- /dev/null
+++ b/arch/mips/wrppmc/Platform
@@ -0,0 +1,7 @@
+#
+# Wind River PPMC Board (4KC + GT64120)
+#
+platform-$(CONFIG_WR_PPMC)	+= wrppmc/
+cflags-$(CONFIG_WR_PPMC)	+= 					\
+		-I$(srctree)/arch/mips/include/asm/mach-wrppmc
+load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
diff --git a/arch/mips/gt64120/wrppmc/irq.c b/arch/mips/wrppmc/irq.c
index c6e706274db..c6e706274db 100644
--- a/arch/mips/gt64120/wrppmc/irq.c
+++ b/arch/mips/wrppmc/irq.c
diff --git a/arch/mips/gt64120/wrppmc/pci.c b/arch/mips/wrppmc/pci.c
index d06192faeb7..d06192faeb7 100644
--- a/arch/mips/gt64120/wrppmc/pci.c
+++ b/arch/mips/wrppmc/pci.c
diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/wrppmc/reset.c
index cc5474b24f0..cc5474b24f0 100644
--- a/arch/mips/gt64120/wrppmc/reset.c
+++ b/arch/mips/wrppmc/reset.c
diff --git a/arch/mips/gt64120/wrppmc/serial.c b/arch/mips/wrppmc/serial.c
index 6f9d0858f59..6f9d0858f59 100644
--- a/arch/mips/gt64120/wrppmc/serial.c
+++ b/arch/mips/wrppmc/serial.c
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/wrppmc/setup.c
index ca65c84031a..ca65c84031a 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/wrppmc/setup.c
diff --git a/arch/mips/gt64120/wrppmc/time.c b/arch/mips/wrppmc/time.c
index 668dbd5f12c..668dbd5f12c 100644
--- a/arch/mips/gt64120/wrppmc/time.c
+++ b/arch/mips/wrppmc/time.c
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 1c4565a9102..444b9f918fd 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -46,9 +46,6 @@ config GENERIC_FIND_NEXT_BIT
 config GENERIC_HWEIGHT
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_BUG
 	def_bool y
 
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h
index 90f2abb04bf..b0b187a29b8 100644
--- a/arch/mn10300/include/asm/highmem.h
+++ b/arch/mn10300/include/asm/highmem.h
@@ -91,7 +91,7 @@ static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
 	return vaddr;
 }
 
-static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+static inline void kunmap_atomic_notypecheck(unsigned long vaddr, enum km_type type)
 {
 #if HIGHMEM_DEBUG
 	enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
diff --git a/arch/mn10300/include/asm/local64.h b/arch/mn10300/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/mn10300/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 05a366a5c4d..907417d187e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -66,10 +66,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_TIME
-	bool
-	default y
-
 config TIME_LOW_RES
 	bool
 	depends on SMP
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 4556d820128..dba11aedce1 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -132,7 +132,7 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx)
 	return page_address(page);
 }
 
-static inline void kunmap_atomic(void *addr, enum km_type idx)
+static inline void kunmap_atomic_notypecheck(void *addr, enum km_type idx)
 {
 	kunmap_parisc(addr);
 	pagefault_enable();
diff --git a/arch/parisc/include/asm/local64.h b/arch/parisc/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/parisc/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index 9877372ffdb..5beb97bafbb 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -82,7 +82,7 @@ unsigned long ftrace_return_to_handler(unsigned long retval0,
 	unsigned long ret;
 
 	pop_return_trace(&trace, &ret);
-	trace.rettime = cpu_clock(raw_smp_processor_id());
+	trace.rettime = local_clock();
 	ftrace_graph_return(&trace);
 
 	if (unlikely(!ret)) {
@@ -126,7 +126,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}
 
-	calltime = cpu_clock(raw_smp_processor_id());
+	calltime = local_clock();
 
 	if (push_return_trace(old, calltime,
 				self_addr, &trace.depth) == -EBUSY) {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2031a284686..631e5a0fb6a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -29,9 +29,6 @@ config MMU
 config GENERIC_CMOS_UPDATE
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_TIME_VSYSCALL
 	def_bool y
 
@@ -120,6 +117,8 @@ config ARCH_NO_VIRT_TO_BUS
 config PPC
 	bool
 	default y
+	select OF
+	select OF_FLATTREE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_TRACER
@@ -141,6 +140,7 @@ config PPC
 	select GENERIC_ATOMIC64 if PPC32
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
 
 config EARLY_PRINTK
 	bool
@@ -172,10 +172,6 @@ config ARCH_MAY_HAVE_PC_FDC
 config PPC_OF
 	def_bool y
 
-config OF
-	def_bool y
-	select OF_FLATTREE
-
 config PPC_UDBG_16550
 	bool
 	default n
@@ -198,10 +194,6 @@ config SYS_SUPPORTS_APM_EMULATION
 	default y if PMAC_APM_EMU
 	bool
 
-config DTC
-       bool
-       default y
-
 config DEFAULT_UIMAGE
 	bool
 	help
@@ -218,7 +210,7 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   PPC_85xx || PPC_86xx
+		   PPC_85xx || PPC_86xx || PPC_PSERIES
 
 config PPC_DCR_NATIVE
 	bool
@@ -351,7 +343,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -368,8 +360,8 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC64 || 6xx
-	select RELOCATABLE if PPC64
+	depends on PPC64 || 6xx || FSL_BOOKE
+	select RELOCATABLE if PPC64 || FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -578,14 +570,6 @@ config SCHED_SMT
 	  when dealing with POWER5 cpus at a cost of slightly increased
 	  overhead in some places. If unsure say N here.
 
-config PROC_DEVICETREE
-	bool "Support for device tree in /proc"
-	depends on PROC_FS
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware or other boot firmware. If unsure, say Y here.
-
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 
@@ -668,7 +652,7 @@ config NEED_SG_DMA_LENGTH
 
 config GENERIC_ISA_DMA
 	bool
-	depends on PPC64 || POWER4 || 6xx && !CPM2
+	depends on ISA_DMA_API
 	default y
 
 config PPC_INDIRECT_PCI
@@ -897,7 +881,7 @@ config KERNEL_START_BOOL
 config KERNEL_START
 	hex "Virtual address of kernel base" if KERNEL_START_BOOL
 	default PAGE_OFFSET if PAGE_OFFSET_BOOL
-	default "0xc2000000" if CRASH_DUMP
+	default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
 	default "0xc0000000"
 
 config PHYSICAL_START_BOOL
@@ -910,7 +894,7 @@ config PHYSICAL_START_BOOL
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
-	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP
+	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
 	default "0x00000000"
 
 config PHYSICAL_ALIGN
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 77cfe7a29e2..e3ea151c959 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -94,7 +94,7 @@ else
 endif
 endif
 
-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 
 ifeq ($(CONFIG_TUNE_CELL),y)
 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
@@ -163,9 +163,11 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 all: zImage
 
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
+# With make 3.82 we cannot mix normal and wildcard targets
+BOOT_TARGETS1 := zImage zImage.initrd uImaged
+BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
 
-PHONY += $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
 
 boot := arch/$(ARCH)/boot
 
@@ -180,10 +182,16 @@ relocs_check: arch/powerpc/relocs_check.pl vmlinux
 zImage: relocs_check
 endif
 
-$(BOOT_TARGETS): vmlinux
+$(BOOT_TARGETS1): vmlinux
+	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+$(BOOT_TARGETS2): vmlinux
+	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+
+
+bootwrapper_install:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-bootwrapper_install %.dtb:
+%.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index cd56bb5b347..5806ef0b860 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -270,7 +270,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1d 0x4>;
+				interrupts = <28 0x4>;
 			};
 
 			UART3: serial@ef600600 {
@@ -281,7 +281,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4>;
+				interrupts = <29 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index d62a4fb6f93..e618fc4cbc9 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -259,7 +259,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1d 0x4>;
+				interrupts = <28 0x4>;
 			};
 
 			UART3: serial@ef600600 {
@@ -270,7 +270,7 @@
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <0x1e 0x4>;
+				interrupts = <29 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts
new file mode 100644
index 00000000000..a97eb2db5a1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8308rdb.dts
@@ -0,0 +1,303 @@
+/*
+ * MPC8308RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			env1@70000 {
+				reg = <0x70000 0x10000>;
+			};
+			kernel@80000 {
+				reg = <0x80000 0x200000>;
+			};
+			dtb@280000 {
+				reg = <0x280000 0x10000>;
+			};
+			ramdisk@290000 {
+				reg = <0x290000 0x570000>;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			jffs2@0 {
+				reg = <0x0 0x2000000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 9dc292962a9..8d1bf0fd926 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 9a3ad311aed..87ff96549fa 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8541-memory-controller";
+			compatible = "fsl,mpc8541-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8541-l2-cache-controller";
+			compatible = "fsl,mpc8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 98e94b46566..d793968743c 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -73,14 +73,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8544-memory-controller";
+			compatible = "fsl,mpc8544-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8544-l2-cache-controller";
+			compatible = "fsl,mpc8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 0f526245268..a17a5572fb7 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -74,14 +74,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8548-memory-controller";
+			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8548-l2-cache-controller";
+			compatible = "fsl,mpc8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 065b2f093de..5c5614f9eb1 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8555-memory-controller";
+			compatible = "fsl,mpc8555-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8555-l2-cache-controller";
+			compatible = "fsl,mpc8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index a5bb1ec70a5..6e85e1ba085 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -71,14 +71,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 92fb17876e7..30cf0e098bb 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -124,14 +124,14 @@
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8568-memory-controller";
+			compatible = "fsl,mpc8568-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8568-l2-cache-controller";
+			compatible = "fsl,mpc8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index 7fad2df2598..ad5b8526900 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -617,6 +617,7 @@
 		bus-frequency = <0>;
 		fsl,qe-num-riscs = <1>;
 		fsl,qe-num-snums = <28>;
+		status = "disabled"; /* no firmware loaded */
 
 		qeic: interrupt-controller@80 {
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
new file mode 100644
index 00000000000..8bcb10b9267
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -0,0 +1,633 @@
+/*
+ * P1022 DS 36Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1022";
+	compatible = "fsl,P1022DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1022@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1022@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@fffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0x0 0x03000000>;
+				label = "ramdisk-nor";
+				read-only;
+			};
+
+			partition@3000000 {
+				reg = <0x03000000 0x00e00000>;
+				label = "diagnostic-nor";
+				read-only;
+			};
+
+			partition@3e00000 {
+				reg = <0x03e00000 0x00200000>;
+				label = "dink-nor";
+				read-only;
+			};
+
+			partition@4000000 {
+				reg = <0x04000000 0x00400000>;
+				label = "kernel-nor";
+				read-only;
+			};
+
+			partition@4400000 {
+				reg = <0x04400000 0x03b00000>;
+				label = "jffs2-nor";
+			};
+
+			partition@7f00000 {
+				reg = <0x07f00000 0x00080000>;
+				label = "dtb-nor";
+				read-only;
+			};
+
+			partition@7f80000 {
+				reg = <0x07f80000 0x00080000>;
+				label = "u-boot-nor";
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			partition@0 {
+				reg = <0x0 0x02000000>;
+				label = "u-boot-nand";
+				read-only;
+			};
+
+			partition@2000000 {
+				reg = <0x02000000 0x10000000>;
+				label = "jffs2-nand";
+			};
+
+			partition@12000000 {
+				reg = <0x12000000 0x10000000>;
+				label = "ramdisk-nand";
+				read-only;
+			};
+
+			partition@22000000 {
+				reg = <0x22000000 0x04000000>;
+				label = "kernel-nand";
+			};
+
+			partition@26000000 {
+				reg = <0x26000000 0x01000000>;
+				label = "dtb-nand";
+				read-only;
+			};
+
+			partition@27000000 {
+				reg = <0x27000000 0x19000000>;
+				label = "reserved-nand";
+			};
+		};
+	};
+
+	soc@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1022-immr", "simple-bus";
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1022-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1022-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			dfsrr;
+
+			wm8776:codec@1a {
+				compatible = "wlf,wm8776";
+				reg = <0x1a>;
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@0 {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@100000 {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@600000 {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@700000 {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		ssi@15000 {
+			compatible = "fsl,mpc8610-ssi";
+			cell-index = <0>;
+			reg = <0x15000 0x100>;
+			interrupts = <75 2>;
+			fsl,mode = "i2s-slave";
+			codec-handle = <&wm8776>;
+			fsl,playback-dma = <&dma00>;
+			fsl,capture-dma = <&dma01>;
+			fsl,fifo-depth = <16>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma00: dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <76 2>;
+			};
+			dma01: dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1022-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2, 256K
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupts = <3 1>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupts = <9 1>;
+				reg = <0x2>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			fsl,magic-packet;
+			fsl,wake-on-filer;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			fixed-link = <1 1 1000 0 0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			fixed-link = <1 1 1000 0 0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			fsl,sdhci-auto-cmd12;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+		};
+
+		power@e0070{
+			compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
+			reg = <0xe0070 0x20>;
+		};
+
+		display@10000 {
+			compatible = "fsl,diu", "fsl,p1022-diu";
+			reg = <0x10000 1000>;
+			interrupts = <64 2>;
+		};
+
+		timer@41100 {
+			compatible = "fsl,mpic-global-timer";
+			reg = <0x41100 0x204>;
+			interrupts = <0xf7 0x2>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1022-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1022-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@fffe09000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+
+	pci2: pcie@fffe0b000 {
+		compatible = "fsl,p1022-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts
new file mode 100644
index 00000000000..94dfa5c9a7f
--- /dev/null
+++ b/arch/powerpc/boot/dts/pdm360ng.dts
@@ -0,0 +1,410 @@
+/*
+ * Device Tree Source for IFM PDM360NG.
+ *
+ * Copyright 2009 - 2010 DENX Software Engineering.
+ * Anatolij Gustschin <agust@denx.de>
+ *
+ * Based on MPC5121E ADS dts.
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "pdm360ng";
+	compatible = "ifm,pdm360ng";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&ipic>;
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5121@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <0x20>;	// 32 bytes
+			i-cache-line-size = <0x20>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <49500000>;// 49.5 MHz (csb/4)
+			bus-frequency = <198000000>;	// 198 MHz csb bus
+			clock-frequency = <396000000>;	// 396 MHz ppc core
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;
+		interrupts = <0x6 0x8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		bank-width = <0x1>;
+		chips = <0x1>;
+
+		partition@0 {
+			label = "nand0";
+			reg = <0x0 0x40000000>;
+		};
+	};
+
+	sram@50000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x50000000 0x20000>;	// 128K at 0x50000000
+	};
+
+	localbus@80000020 {
+		compatible = "fsl,mpc5121-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x80000020 0x40>;
+
+		ranges = <0x0 0x0 0xf0000000 0x10000000   /* Flash */
+			  0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */
+
+		flash@0,0 {
+			compatible = "amd,s29gl01gp", "cfi-flash";
+			reg = <0 0x00000000 0x08000000
+			       0 0x08000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "environment";
+				reg = <0x00080000 0x00080000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "splash-image";
+				reg = <0x00100000 0x00080000>;
+				read-only;
+			};
+			partition@180000 {
+				label = "device-tree";
+				reg = <0x00180000 0x00040000>;
+			};
+			partition@1c0000 {
+				label = "kernel";
+				reg = <0x001c0000 0x00500000>;
+			};
+			partition@6c0000 {
+				label = "filesystem";
+				reg = <0x006c0000 0x07940000>;
+			};
+		};
+
+		mram0@2,0 {
+			compatible = "mtd-ram";
+			reg = <2 0x00000 0x10000>;
+			bank-width = <2>;
+		};
+
+		mram1@2,10000 {
+			compatible = "mtd-ram";
+			reg = <2 0x010000 0x10000>;
+			bank-width = <2>;
+		};
+	};
+
+	soc@80000000 {
+		compatible = "fsl,mpc5121-immr";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		ranges = <0x0 0x80000000 0x400000>;
+		reg = <0x80000000 0x400000>;
+		bus-frequency = <66000000>;	// 66 MHz ips bus
+
+		// IPIC
+		// interrupts cell = <intr #, sense>
+		// sense values match linux IORESOURCE_IRQ_* defines:
+		// sense == 8: Level, low assertion
+		// sense == 2: Edge, high-to-low change
+		//
+		ipic: interrupt-controller@c00 {
+			compatible = "fsl,mpc5121-ipic", "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0xc00 0x100>;
+		};
+
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+		};
+
+		reset@e00 {	// Reset module
+			compatible = "fsl,mpc5121-reset";
+			reg = <0xe00 0x100>;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{	//Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+		};
+
+		can@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <12 0x8>;
+			reg = <0x1300 0x80>;
+		};
+
+		can@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <13 0x8>;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c";
+			reg = <0x1700 0x20>;
+			interrupts = <0x9 0x8>;
+			fsl,preserve-clocking;
+
+			eeprom@50 {
+				compatible = "at,24c01";
+				reg = <0x50>;
+			};
+
+			rtc@68 {
+				compatible = "stm,m41t00";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c";
+			reg = <0x1740 0x20>;
+			interrupts = <0xb 0x8>;
+			fsl,preserve-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+		};
+
+		can@2300 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <90 0x8>;
+			reg = <0x2300 0x80>;
+		};
+
+		can@2380 {
+			compatible = "fsl,mpc5121-mscan";
+			interrupts = <91 0x8>;
+			reg = <0x2380 0x80>;
+		};
+
+		viu@2400 {
+			compatible = "fsl,mpc5121-viu";
+			reg = <0x2400 0x400>;
+			interrupts = <67 0x8>;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				compatible = "smsc,lan8700";
+				reg = <0x1f>;
+			};
+		};
+
+		eth0: ethernet@2800 {
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x200>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			phy-handle = < &phy >;
+		};
+
+		// USB1 using external ULPI PHY
+		usb@3000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x3000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <43 0x8>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr";
+			reg = <0x4000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			fsl,invert-pwr-fault;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		// 512x PSCs are not 52xx PSCs compatible
+		serial@11000 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <0>;
+			reg = <0x11000 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11100 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <1>;
+			reg = <0x11100 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11200 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <2>;
+			reg = <0x11200 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11300 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <3>;
+			reg = <0x11300 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11400 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <4>;
+			reg = <0x11400 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11600 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <6>;
+			reg = <0x11600 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11800 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <8>;
+			reg = <0x11800 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		serial@11B00 {
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+			cell-index = <11>;
+			reg = <0x11B00 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+		};
+
+		pscfifo@11f00 {
+			compatible = "fsl,mpc5121-psc-fifo";
+			reg = <0x11f00 0x100>;
+			interrupts = <40 0x8>;
+		};
+
+		spi@11900 {
+			compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc";
+			cell-index = <9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x11900 0x100>;
+			interrupts = <40 0x8>;
+			fsl,rx-fifo-size = <16>;
+			fsl,tx-fifo-size = <16>;
+
+			// 7845 touch screen controller
+			ts@0 {
+				compatible = "ti,ads7846";
+				reg = <0x0>;
+				spi-max-frequency = <3000000>;
+				// pen irq is GPIO25
+				interrupts = <78 0x8>;
+			};
+		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts
new file mode 100644
index 00000000000..49efd44057d
--- /dev/null
+++ b/arch/powerpc/boot/dts/stxssa8555.dts
@@ -0,0 +1,380 @@
+/*
+ * MPC8555-based STx GP3 Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright 2010 Silicon Turnkey Express LLC.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "stx,gp3";
+        compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 71347537b83..15ca731bc24 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -289,7 +289,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index b30f63753d4..f49d0918131 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -311,7 +311,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 61f25e15fd6..5dbb36edb03 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -442,7 +442,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 025759c7c95..a050ae42710 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -442,7 +442,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 95e28738183..81bad8cd375 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -311,7 +311,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index ff70580a8f4..22ec39b5bee 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -382,7 +382,14 @@
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts
new file mode 100644
index 00000000000..f6da7ec49a8
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8xx.dts
@@ -0,0 +1,172 @@
+/*
+ * TQM8XX Device Tree Source
+ *
+ * Heiko Schocher <hs@denx.de>
+ * 2010 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "TQM8xx";
+	compatible = "tqc,tqm8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mdio1 = &phy1;
+		serial0 = &smc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,860@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x1000>;		// L1, 4K
+			i-cache-size = <0x1000>;		// L1, 4K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <
+			0x0 0x0 0x40000000 0x800000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+	};
+
+	soc@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfff00000 0x00004000>;
+
+		phy1: mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		eth1: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <1>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc860-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc860-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			smc1: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc860-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			eth0: ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc860-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <0>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig
index 4aa17b676a3..97fedceaa30 100644
--- a/arch/powerpc/configs/40x/acadia_defconfig
+++ b/arch/powerpc/configs/40x/acadia_defconfig
@@ -1,1088 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:33:07 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
 CONFIG_ACADIA=y
-# CONFIG_EP405 is not set
-# CONFIG_HCU4 is not set
-# CONFIG_HOTFOOT is not set
-# CONFIG_KILAUEA is not set
-# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-CONFIG_PPC40x_SIMPLE=y
-CONFIG_405EZ=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
 CONFIG_IBM_NEW_EMAC_DEBUG=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
-CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
-CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index 9a5f1ab777e..33b3c24f4ed 100644
--- a/arch/powerpc/configs/40x/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
@@ -1,1295 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:37:34 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_ACADIA is not set
 CONFIG_EP405=y
-# CONFIG_HCU4 is not set
-# CONFIG_HOTFOOT is not set
-# CONFIG_KILAUEA is not set
-# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
-CONFIG_405GP=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig
index 0b452135d1d..4613079a0ab 100644
--- a/arch/powerpc/configs/40x/hcu4_defconfig
+++ b/arch/powerpc/configs/40x/hcu4_defconfig
@@ -1,1143 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:45:11 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_ACADIA is not set
-# CONFIG_EP405 is not set
 CONFIG_HCU4=y
-# CONFIG_HOTFOOT is not set
-# CONFIG_KILAUEA is not set
-# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
-CONFIG_405GPR=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 4d2de0bed60..4e19ee7ce4e 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,1288 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:51:23 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_ACADIA is not set
-# CONFIG_EP405 is not set
-# CONFIG_HCU4 is not set
-# CONFIG_HOTFOOT is not set
 CONFIG_KILAUEA=y
-# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-CONFIG_PPC40x_SIMPLE=y
-CONFIG_405EX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-CONFIG_IBM_NEW_EMAC_RGMII=y
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
 CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index a1f3f505e4a..651be09136f 100644
--- a/arch/powerpc/configs/40x/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
@@ -1,1088 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:55:12 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_ACADIA is not set
-# CONFIG_EP405 is not set
-# CONFIG_HCU4 is not set
-# CONFIG_HOTFOOT is not set
-# CONFIG_KILAUEA is not set
 CONFIG_MAKALU=y
 # CONFIG_WALNUT is not set
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-CONFIG_PPC40x_SIMPLE=y
-CONFIG_405EX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-CONFIG_IBM_NEW_EMAC_RGMII=y
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig
index c7631357714..0a81e1f7dd5 100644
--- a/arch/powerpc/configs/40x/virtex_defconfig
+++ b/arch/powerpc/configs/40x/virtex_defconfig
@@ -1,1196 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:17:55 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_XILINX_VIRTEX=y
-# CONFIG_ACADIA is not set
-# CONFIG_EP405 is not set
-# CONFIG_HCU4 is not set
-# CONFIG_KILAUEA is not set
-# CONFIG_MAKALU is not set
 # CONFIG_WALNUT is not set
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
-# CONFIG_PPC40x_SIMPLE is not set
-CONFIG_XILINX_VIRTEX_II_PRO=y
-CONFIG_XILINX_VIRTEX_4_FX=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_XILINX_SYSACE=y
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 CONFIG_XILINX_HWICAP=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_XILINX=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 6597b2f1d1a..ded455e1833 100644
--- a/arch/powerpc/configs/40x/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
@@ -1,1165 +1,77 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:56:30 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_ACADIA is not set
-# CONFIG_EP405 is not set
-# CONFIG_HCU4 is not set
-# CONFIG_HOTFOOT is not set
-# CONFIG_KILAUEA is not set
-# CONFIG_MAKALU is not set
-CONFIG_WALNUT=y
-# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set
-# CONFIG_PPC40x_SIMPLE is not set
-CONFIG_405GP=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_OF_RTC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index 2d3dfb55fbe..63746a041d6 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,1142 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:02:35 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
 CONFIG_ARCHES=y
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_460EX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
 CONFIG_SENSORS_AD7414=y
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index 51a00c46df1..f5f2a4e3e21 100644
--- a/arch/powerpc/configs/44x/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
@@ -1,1090 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:09:03 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440EP=y
-CONFIG_IBM440EP_ERR42=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 1028b1bfb60..45c64d818b2 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,1356 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:12:20 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
 CONFIG_CANYONLANDS=y
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_460EX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
 CONFIG_SENSORS_AD7414=y
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 69f5633cbd4..fedd03fdf5d 100644
--- a/arch/powerpc/configs/44x/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
@@ -1,1181 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:20:46 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
-CONFIG_EBONY=y
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440GP=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_OF_RTC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
index dcd859c8b4a..ebff7011282 100644
--- a/arch/powerpc/configs/44x/eiger_defconfig
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -1,1297 +1,123 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:33:04 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
 CONFIG_EIGER=y
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_460SX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_FUSION=y
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
 CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-# CONFIG_I2O_CONFIG is not set
-# CONFIG_I2O_BUS is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=y
 CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_SEQIV=y
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_CTS=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_XTS=y
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/icon_defconfig b/arch/powerpc/configs/44x/icon_defconfig
index 277f88c2750..865e93fb41f 100644
--- a/arch/powerpc/configs/44x/icon_defconfig
+++ b/arch/powerpc/configs/44x/icon_defconfig
@@ -1,1451 +1,119 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc7
-# Fri May 21 17:40:22 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-# CONFIG_LOGBUFFER is not set
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
 CONFIG_ICON=y
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440SPe=y
-CONFIG_STDBINUTILS=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_XILINX_SYSACE=y
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_FUSION=y
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=y
 CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
 # CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_BOOTCOUNT is not set
-# CONFIG_DISPLAY_PDSP1880 is not set
-# CONFIG_MUCMC52_IO is not set
-# CONFIG_UC101_IO is not set
-# CONFIG_SRAM is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
 CONFIG_MFD_SM501=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_SM501=y
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index 8683cbc6c3e..8ece4c77441 100644
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -1,1026 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Thu Mar  4 11:50:12 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
 CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-# CONFIG_NOT_COHERENT_CACHE is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_47x=y
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
 CONFIG_ISS4xx=y
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_OF_RTC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="root=/dev/issblk0"
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x40000200
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index a2c24d1e051..4ca9b4873c5 100644
--- a/arch/powerpc/configs/44x/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
@@ -1,1166 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc5
-# Tue Jan 26 14:40:58 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
 CONFIG_KATMAI=y
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440SPe=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index 3bb55b57077..e3b65d24207 100644
--- a/arch/powerpc/configs/44x/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
@@ -1,1173 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 14:59:12 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
 CONFIG_RAINIER=y
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440GRX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-CONFIG_PPC_EARLY_DEBUG_44x=y
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
 CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
-CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/redwood_defconfig b/arch/powerpc/configs/44x/redwood_defconfig
index 684f40dc8a4..64cd0f3421a 100644
--- a/arch/powerpc/configs/44x/redwood_defconfig
+++ b/arch/powerpc/configs/44x/redwood_defconfig
@@ -1,1287 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:05:05 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
 CONFIG_REDWOOD=y
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_460SX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_FUSION=y
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
 CONFIG_I2O=y
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-# CONFIG_I2O_CONFIG is not set
-# CONFIG_I2O_BUS is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
 CONFIG_IBM_NEW_EMAC_RXB=256
 CONFIG_IBM_NEW_EMAC_TXB=256
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
 CONFIG_IBM_NEW_EMAC_DEBUG=y
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=y
 CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_SEQIV=y
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_CTS=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_XTS=y
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_GHASH=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index e202924e617..01d03367917 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -1,1439 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:11:24 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
 CONFIG_SAM440EP=y
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440EP=y
-CONFIG_IBM440EP_ERR42=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 CONFIG_RTC_DRV_M41T80_WDT=y
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index c348a4662a9..89b2f962613 100644
--- a/arch/powerpc/configs/44x/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
@@ -1,1196 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:15:51 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
 CONFIG_SEQUOIA=y
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440EPX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index f4cb7e84cb8..e3386cf6f5b 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -1,1175 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:21:04 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
 CONFIG_TAISHAN=y
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-CONFIG_PPC44x_SIMPLE=y
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_440GX=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
index c7ead0ec00b..1eb3caf828a 100644
--- a/arch/powerpc/configs/44x/virtex5_defconfig
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -1,1201 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:49 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-# CONFIG_PPC4xx_PCI_EXPRESS is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
-# CONFIG_WARP is not set
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_YOSEMITE is not set
 CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
-# CONFIG_PPC44x_SIMPLE is not set
-# CONFIG_PPC4xx_GPIO is not set
-CONFIG_XILINX_VIRTEX=y
-CONFIG_XILINX_VIRTEX_5_FXT=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_XILINX_SYSACE=y
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 CONFIG_XILINX_HWICAP=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_XILINX=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 99eff4dd936..9c13b9dffaf 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,1508 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 15:27:46 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-pika"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_BAMBOO is not set
 # CONFIG_EBONY is not set
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-# CONFIG_TAISHAN is not set
-# CONFIG_KATMAI is not set
-# CONFIG_RAINIER is not set
 CONFIG_WARP=y
-# CONFIG_ARCHES is not set
-# CONFIG_CANYONLANDS is not set
-# CONFIG_GLACIER is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_EIGER is not set
-# CONFIG_YOSEMITE is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_PPC44x_SIMPLE is not set
 CONFIG_PPC4xx_GPIO=y
-CONFIG_440EP=y
-CONFIG_IBM440EP_ERR42=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ip=on"
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_XILINX is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
 CONFIG_SENSORS_AD7414=y
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_PIKA_WDT=y
-# CONFIG_BOOKE_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
 # CONFIG_LEDS_GPIO_PLATFORM is not set
-CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 7664c83c17c..f234c4d0b15 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -1,1328 +1,98 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:22 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
-# CONFIG_PPC_MEDIA5200 is not set
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_PPC_MPC5200_GPIO is not set
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MPC5200_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index eac7c17eef3..a4a795c8074 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -1,1333 +1,78 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:24 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
-# CONFIG_PPC_EFIKA is not set
 CONFIG_PPC_LITE5200=y
-# CONFIG_PPC_MEDIA5200 is not set
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_PPC_MPC5200_GPIO is not set
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
-CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 27afb6ecdf6..20d53a1aa7e 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -1,619 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:23 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
-# CONFIG_PPC_MEDIA5200 is not set
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_PPC_MPC5200_GPIO is not set
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
-CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -623,752 +59,53 @@ CONFIG_VITESSE_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MPC5200_WDT is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 5fe39ddb4e1..6bd58338bf1 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -1,1321 +1,103 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:25 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="trunk"
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
-# CONFIG_PPC_MEDIA5200 is not set
-# CONFIG_PPC_MPC5200_BUGFIX is not set
-# CONFIG_PPC_MPC5200_GPIO is not set
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=m
-CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
+CONFIG_PROC_DEVICETREE=y
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=m
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
-CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_SOC is not set
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index a108b84c007..3a1f70292d9 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -1,1473 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:34:24 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
-# CONFIG_PPC_MEDIA5200 is not set
 CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
-# CONFIG_PPC_MPC5200_LPBFIFO is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
-CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_MPC52xx=y
 CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MPC5200_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 04f16268e1c..eed42d8919e 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,1522 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:38 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC834x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
 CONFIG_THERMAL=y
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
 CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index 1843ee11823..e43ecb27dfd 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,1016 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:39 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
 CONFIG_KMETER1=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
 CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
 CONFIG_MTD_UBI_DEBUG=y
-# CONFIG_MTD_UBI_DEBUG_MSG is not set
-# CONFIG_MTD_UBI_DEBUG_PARANOID is not set
-# CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
-# CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
-# CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
-
-#
-# Additional UBI debugging messages
-#
-# CONFIG_MTD_UBI_DEBUG_MSG_BLD is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
-# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_PROC_DEVICETREE=y
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_WAN=y
 CONFIG_HDLC=y
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_DLCI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=y
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 78ae3bf1e9c..c2e6ab51d33 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,1838 +1,111 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:40 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC831x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
 CONFIG_CICADA_PHY=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index cccb71393ac..1d3b2006591 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,1904 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:40 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC831x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 74cb27aa9d1..91fe73bd5ad 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,1402 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:41 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC832x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
 CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 10412a9c7f9..6d300f20560 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,1569 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:42 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC832x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=y
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
 CONFIG_NLS_ISO8859_8=y
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 7b31fc3f354..b236a67e01f 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,1667 +1,101 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:43 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC834x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
 CONFIG_CICADA_PHY=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 41401a9b355..001dead3cde 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,1542 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:44 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC834x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
 CONFIG_CICADA_PHY=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index dc176b676dc..9dccefca00c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,1335 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:45 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC834x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
 CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index f512972c717..d4b165d7d29 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,1484 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:46 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
 CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 77abfe8ff19..89ba67274bd 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,1391 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:47 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
 CONFIG_MPC836x_RDK=y
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_GTM=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
-# CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_FSL_DIU is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_SLOW=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 0cdb41418d5..2ea6b405046 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,1406 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:47 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
 CONFIG_MPC837x_MDS=y
-# CONFIG_MPC837x_RDB is not set
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC837x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index e69ed1b6142..bffe3c77503 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,1574 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:48 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
-# CONFIG_SBC834x is not set
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC837x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 56e3995d898..fa5c9eefc9a 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,1491 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:49 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
-# CONFIG_MPC831x_RDB is not set
-# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC832x_RDB is not set
-# CONFIG_MPC834x_MDS is not set
-# CONFIG_MPC834x_ITX is not set
-# CONFIG_MPC836x_MDS is not set
-# CONFIG_MPC836x_RDK is not set
-# CONFIG_MPC837x_MDS is not set
-# CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
-# CONFIG_ASP834x is not set
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC834x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index f67a8d1cd0b..385b1af37d7 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,1192 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:50 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
 CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
-CONFIG_NETDEV_1000=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 61b122a25cd..222b704c1f4 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,1054 +1,64 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:51 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index a5ceaa4b5e4..619702de947 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,1202 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:52 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
 CONFIG_MPC8560_ADS=y
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
 CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 4adb4eba2d4..6bf56e83f95 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,1222 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:53 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 3de8450cd55..a9a17d05576 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,1058 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:54 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index bd467fe1393..820e32d8c42 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,1092 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:54 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
 CONFIG_SBC8560=y
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
 CONFIG_RTC_DRV_M48T59=y
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 9803e031165..b6db3f47af9 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,1754 +1,111 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:55 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
 CONFIG_SOCRATES=y
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
 CONFIG_MTD_NAND_SOCRATES=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_MPC8xxx is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
 CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_FSL_DIU is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
 CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 880ab7aaf20..333a41bd2a6 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,1614 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:56 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=m
-CONFIG_OF_MDIO=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=m
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_FS_ENET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_CPM is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
 CONFIG_AGP=m
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
 CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SND is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 230aa2fc062..33db352f847 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,1390 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:57 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
 CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index dbe04b981b8..f0c20dfbd4d 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,1438 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:58 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_FS_ENET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_CPM is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
 CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 845efa79dd2..a883450dcdf 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,1436 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:59 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
 CONFIG_TQM8548=y
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_UPM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index b958136a12f..ff95f90dc17 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,1438 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:00 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
 CONFIG_TQM8555=y
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_FS_ENET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_CPM is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
 CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 008bc975492..8d6c90ea478 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,1438 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:01 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_FS_ENET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_CPM is not set
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
 CONFIG_HWMON_DEBUG_CHIP=y
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2cf80dba028..f53efe4a0e0 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,397 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:01 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_RDB is not set
-# CONFIG_SOCRATES is not set
-# CONFIG_KSI8560 is not set
 CONFIG_XES_MPC85xx=y
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_MPC8xxx_GPIO=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
 CONFIG_ADVANCED_OPTIONS=y
 CONFIG_LOWMEM_SIZE_BOOL=y
 CONFIG_LOWMEM_SIZE=0x40000000
-# CONFIG_LOWMEM_CAM_NUM_BOOL is not set
-CONFIG_LOWMEM_CAM_NUM=3
-# CONFIG_RELOCATABLE is not set
 CONFIG_PAGE_OFFSET_BOOL=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_KERNEL_START_BOOL=y
-CONFIG_KERNEL_START=0x80000000
-# CONFIG_PHYSICAL_START_BOOL is not set
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
 CONFIG_TASK_SIZE_BOOL=y
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -406,1554 +58,120 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_UPM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCA953X_IRQ is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=y
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
 CONFIG_SENSORS_LM90=y
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_ISP1760_HCD=y
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
 CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b728a7d6425..432ebc28d25 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,396 +1,50 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:07 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
 CONFIG_GEF_PPC9A=y
-# CONFIG_GEF_SBC310 is not set
-# CONFIG_GEF_SBC610 is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_MMIO_NVRAM=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
 # CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -404,568 +58,49 @@ CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -973,792 +108,87 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
 CONFIG_GEF_WDT=y
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
 # CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192SU is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
 CONFIG_VME_BUS=y
-
-#
-# VME Bridge Drivers
-#
-# CONFIG_VME_CA91CX42 is not set
 CONFIG_VME_TSI148=y
-
-#
-# VME Device Drivers
-#
-# CONFIG_VME_USER is not set
-
-#
-# VME Board Drivers
-#
-# CONFIG_VMIVME_7805 is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-# CONFIG_RAMZSWAP is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-# CONFIG_DT3155 is not set
-# CONFIG_CRYSTALHD is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1797,174 +227,11 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index 8e738de5f6a..ce5e919d9b5 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,396 +1,50 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:05 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_GEF_PPC9A is not set
 CONFIG_GEF_SBC310=y
-# CONFIG_GEF_SBC610 is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_MMIO_NVRAM=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
 # CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -404,509 +58,50 @@ CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
-# CONFIG_SATA_FSL is not set
 # CONFIG_ATA_SFF is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -914,737 +109,83 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
 CONFIG_GEF_WDT=y
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
 # CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1683,174 +224,11 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 59bf9e27d7f..589e71e6dc1 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,384 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:06 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
-CONFIG_MPC8641=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-CONFIG_MMIO_NVRAM=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
 CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -392,104 +52,20 @@ CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
@@ -498,80 +74,38 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -579,491 +113,45 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_DS1682=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -1071,781 +159,82 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
 CONFIG_GEF_WDT=y
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
 # CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_ET131X is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_R8187SE is not set
-# CONFIG_RTL8192SU is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
 CONFIG_VME_BUS=y
-
-#
-# VME Bridge Drivers
-#
-# CONFIG_VME_CA91CX42 is not set
 CONFIG_VME_TSI148=y
-
-#
-# VME Device Drivers
-#
-# CONFIG_VME_USER is not set
-
-#
-# VME Board Drivers
-#
-# CONFIG_VMIVME_7805 is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-# CONFIG_RAMZSWAP is not set
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_STRIP is not set
-# CONFIG_DT3155 is not set
-# CONFIG_CRYSTALHD is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1884,238 +273,34 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 4e8b01e7324..321fb47096d 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,958 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:03 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
-# CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
-# CONFIG_GEF_SBC610 is not set
-CONFIG_MPC8610=y
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
 CONFIG_PCI_DEBUG=y
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
 CONFIG_ULI526X=y
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -960,791 +81,40 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_FSL_DIU=y
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_MPC8610=y
-CONFIG_SND_SOC_MPC8610_HPCD=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_CS4270=y
-CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 20fde6374aa..b5e46399374 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,380 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:04 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
-# CONFIG_SBC8641D is not set
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
-# CONFIG_GEF_SBC610 is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_IOMMU_HELPER=y
-CONFIG_SWIOTLB=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -389,524 +51,41 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -914,900 +93,84 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 74f714d8593..71145c3a64d 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,384 +1,41 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:17:02 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
-# CONFIG_MPC8610_HPCD is not set
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
-# CONFIG_GEF_SBC610 is not set
-CONFIG_MPC8641=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -392,104 +49,20 @@ CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
@@ -498,80 +71,38 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -579,360 +110,51 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
-# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=y
 CONFIG_MD_FAULTY=y
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -940,495 +162,54 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 CONFIG_PPPOATM=m
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_STATS=y
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=m
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1467,243 +248,34 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index a670cee255b..ca84c7fc24d 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,984 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:22 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
 CONFIG_PPC_ADDER875=y
-# CONFIG_PPC_MGSUVD is not set
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
 CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_GPIO is not set
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_8XX_MINIMAL_FPEMU is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig
index 851287e78fc..b6d49da9c82 100644
--- a/arch/powerpc/configs/amigaone_defconfig
+++ b/arch/powerpc/configs/amigaone_defconfig
@@ -1,724 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Sun Feb  1 14:22:42 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_CHECK_CACHE_COHERENCY=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
 CONFIG_AMIGAONE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
 # CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
 # CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_MMIO is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -728,908 +83,63 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
 CONFIG_FB_3DFX=y
-# CONFIG_FB_3DFX_ACCEL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index b429a655b54..f9e6a3ea5a6 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,553 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:23 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-CONFIG_PPC_PERF_CTRS=y
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_CHECK_CACHE_COHERENCY=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_STORCENTER is not set
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
 CONFIG_PPC_C2K=y
-CONFIG_MV64X60=y
-# CONFIG_GAMECUBE is not set
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
 CONFIG_HOTPLUG_PCI_SHPC=m
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
-CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-# CONFIG_IP_VS_PROTO_SCTP is not set
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
@@ -556,33 +69,21 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -591,7 +92,6 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
-# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -603,52 +103,19 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
-# CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -656,37 +123,14 @@ CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -696,597 +140,104 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=m
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=m
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
-# CONFIG_SCSI_HPSA is not set
 CONFIG_SCSI_3W_9XXX=m
-# CONFIG_SCSI_3W_SAS is not set
 CONFIG_SCSI_ACARD=m
 CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
 CONFIG_SCSI_AIC7XXX_OLD=m
 CONFIG_SCSI_AIC79XX=m
 CONFIG_AIC79XX_CMDS_PER_DEVICE=4
 CONFIG_AIC79XX_RESET_DELAY_MS=15000
 # CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 CONFIG_SCSI_ARCMSR=m
 CONFIG_MEGARAID_NEWGEN=y
 CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
-# CONFIG_MEGARAID_LEGACY is not set
 CONFIG_MEGARAID_SAS=m
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
 CONFIG_SCSI_FUTURE_DOMAIN=m
 CONFIG_SCSI_GDTH=m
 CONFIG_SCSI_IPS=m
 CONFIG_SCSI_INITIO=m
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 # CONFIG_ATM_DRIVERS is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_MPSC=y
 CONFIG_SERIAL_MPSC_CONSOLE=y
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=m
 CONFIG_GEN_RTC=m
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_MPC is not set
 CONFIG_I2C_MV64XXX=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
-# CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
-# CONFIG_SENSORS_GL520SM is not set
 CONFIG_SENSORS_IT87=m
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
 CONFIG_SENSORS_LM78=m
@@ -1295,217 +246,53 @@ CONFIG_SENSORS_LM83=m
 CONFIG_SENSORS_LM85=m
 CONFIG_SENSORS_LM87=m
 CONFIG_SENSORS_LM90=m
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
 CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
-# CONFIG_SENSORS_SMSC47M192 is not set
 CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
 CONFIG_SENSORS_VIA686A=m
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=m
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
 CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83L786NG is not set
 CONFIG_SENSORS_W83627HF=m
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_MV64X60_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
 CONFIG_PCIPCWATCHDOG=m
 CONFIG_WDTPCI=m
-
-#
-# USB-based Watchdog Cards
-#
 CONFIG_USBPCWATCHDOG=m
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
 CONFIG_USB_STORAGE_FREECOM=m
 CONFIG_USB_STORAGE_ISD200=m
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=m
 CONFIG_USB_STORAGE_SDDR55=m
 CONFIG_USB_STORAGE_JUMPSHOT=m
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1523,256 +310,66 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_AMSO1100=m
-# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
-# CONFIG_MLX4_INFINIBAND is not set
-# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
 CONFIG_OSF_PARTITION=y
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
 CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1812,261 +409,42 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
-CONFIG_LSM_MMAP_MIN_ADDR=65536
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
 CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_SELINUX=y
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_DAC is not set
-CONFIG_DEFAULT_SECURITY="selinux"
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 94337195431..22a403d78d3 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,428 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:31:04 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DCR_MMIO=y
-CONFIG_PPC_DCR=y
-CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
 CONFIG_CPUSETS=y
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
-CONFIG_PPC_CELLEB=y
 CONFIG_PPC_PS3=y
-
-#
-# PS3 Platform Options
-#
-# CONFIG_PS3_ADVANCED is not set
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_VUART=y
-CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
-CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=m
 CONFIG_PS3_FLASH=m
 CONFIG_PS3_LPM=m
-CONFIG_PPC_CELL=y
-CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
-
-#
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=m
-CONFIG_SPU_BASE=y
-CONFIG_CBE_RAS=y
-CONFIG_CBE_THERM=m
-CONFIG_CBE_CPUFREQ=m
-CONFIG_CBE_CPUFREQ_PMI=m
-CONFIG_OPROFILE_CELL=y
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_UDBG_RTAS_CONSOLE=y
-CONFIG_PPC_UDBG_BEAT=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
+CONFIG_PPC_CELLEB=y
 CONFIG_RTAS_FLASH=y
-CONFIG_PPC_PMI=m
-CONFIG_MMIO_NVRAM=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_INDIRECT_IO=y
-CONFIG_GENERIC_IOMAP=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-
-#
-# CPU Frequency drivers
-#
-CONFIG_AXON_RAM=m
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=9
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_IOMMU_HELPER=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
-# CONFIG_PPC_SUBPAGE_PROT is not set
 CONFIG_SCHED_SMT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
@@ -433,18 +92,12 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -456,944 +109,111 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AEC62XX=y
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_CELLEB=y
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
 CONFIG_SATA_PROMISE=y
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
 CONFIG_PATA_PDC2027X=m
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCC is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
 CONFIG_FUSION=y
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
 CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
 CONFIG_BONDING=m
 CONFIG_MACVLAN=m
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
 CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
 CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=2
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=m
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
-# CONFIG_INFINIBAND_SRP is not set
-# CONFIG_INFINIBAND_ISER is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_CELL=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 CONFIG_UIO=m
-# CONFIG_UIO_CIF is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1405,133 +225,14 @@ CONFIG_NLS_ISO8859_9=m
 CONFIG_NLS_ISO8859_13=m
 CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_CRYPTO_HMAC=y
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 6be6c09eba6..895449ed971 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -1,1199 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:32:45 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DCR_MMIO=y
-CONFIG_PPC_DCR=y
-CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
 CONFIG_PPC_CELLEB=y
-# CONFIG_PPC_PS3 is not set
-CONFIG_PPC_CELL=y
-CONFIG_PPC_CELL_NATIVE=y
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-
-#
-# Cell Broadband Engine options
-#
 CONFIG_SPU_FS=y
-CONFIG_SPU_FS_64K_LS=y
-CONFIG_SPU_BASE=y
-CONFIG_CBE_RAS=y
 # CONFIG_CBE_THERM is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
-CONFIG_PPC_UDBG_BEAT=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
 # CONFIG_RTAS_PROC is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_INDIRECT_IO=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-# CONFIG_IOMMU_VMERGE is not set
-CONFIG_IOMMU_HELPER=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=4
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-# CONFIG_MEMORY_HOTREMOVE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_PPC_HAS_HASH_64K=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_CELLEB=y
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID456 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
 CONFIG_SERIAL_TXX9_NR_UARTS=3
 CONFIG_SERIAL_TXX9_CONSOLE=y
-# CONFIG_SERIAL_TXX9_STDSERIAL is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_WATCHDOG_RTAS is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1205,129 +130,33 @@ CONFIG_NLS_ISO8859_9=m
 CONFIG_NLS_ISO8859_13=m
 CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 2fdab660fce..b20554efddc 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,748 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:35:37 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
 CONFIG_SMP=y
-CONFIG_NR_CPUS=4
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
 CONFIG_ISA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
 # CONFIG_NETFILTER_ADVANCED is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
 # CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 # CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-CONFIG_NF_NAT_SIP=m
 # CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
 CONFIG_BLK_DEV_SL82C105=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-# CONFIG_TULIP is not set
 CONFIG_DE4X5=y
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -752,865 +79,69 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_BRIQ_PANEL=m
-# CONFIG_HVC_RTAS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-# CONFIG_I2C_HYDRA is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
 CONFIG_FB_ATY=y
 CONFIG_FB_ATY_CT=y
-# CONFIG_FB_ATY_GENERIC_LCD is not set
 CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
 CONFIG_FB_3DFX=y
-# CONFIG_FB_3DFX_ACCEL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 6b708395a7c..2677b08199e 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,1206 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:24 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
-# CONFIG_MPC8272_ADS is not set
-# CONFIG_PQ2FADS is not set
 CONFIG_EP8248E=y
-# CONFIG_MGCOGE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_8260=y
-CONFIG_8272=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_8260=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 1cee889dd9e..f9a3112e544 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,931 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:24 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
 CONFIG_PPC_EP88XC=y
-# CONFIG_PPC_ADDER875 is not set
-# CONFIG_PPC_MGSUVD is not set
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
 CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_GPIO is not set
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
+CONFIG_PROC_DEVICETREE=y
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 57d3ffa3026..1196c34163b 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,708 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:30 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
 CONFIG_POWER4_ONLY=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-# CONFIG_VSX is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_64=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PMAC64=y
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-CONFIG_U3_DART=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MPIC_U3_HT_IRQS=y
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_970_NAP=y
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
 CONFIG_CPU_FREQ_PMAC64=y
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
 CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_RAWIO=y
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
-# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_THERM_PM72=y
@@ -711,684 +102,102 @@ CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
 CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
-# CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
 CONFIG_AGP=m
 CONFIG_AGP_UNINORTH=m
-# CONFIG_DRM is not set
-CONFIG_VGASTATE=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
 CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1396,7 +205,6 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1414,445 +222,88 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
 CONFIG_NLS_CODEPAGE_1250=y
 CONFIG_NLS_CODEPAGE_1251=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/gamecube_defconfig b/arch/powerpc/configs/gamecube_defconfig
index 1c2dbf07ac3..fcf0a398cd6 100644
--- a/arch/powerpc/configs/gamecube_defconfig
+++ b/arch/powerpc/configs/gamecube_defconfig
@@ -1,1060 +1,114 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sun Nov 22 21:07:30 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-CONFIG_PPC_PERF_CTRS=y
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-gcn"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 CONFIG_PERF_COUNTERS=y
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_STORCENTER is not set
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
-# CONFIG_PPC_C2K is not set
-CONFIG_GAMECUBE_COMMON=y
-CONFIG_USBGECKO_UDBG=y
-CONFIG_FLIPPER_PIC=y
 CONFIG_GAMECUBE=y
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
 CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_PAGE_OFFSET_BOOL is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_OF is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PPC=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_GENERIC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
 CONFIG_SCHED_TRACER=y
-CONFIG_BOOT_TRACER=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DMA_API_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_USBGECKO=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/holly_defconfig b/arch/powerpc/configs/holly_defconfig
index a60d61bee48..b9b63a60952 100644
--- a/arch/powerpc/configs/holly_defconfig
+++ b/arch/powerpc/configs/holly_defconfig
@@ -1,950 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:17 2007
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_MPC7448HPC2 is not set
 CONFIG_PPC_HOLLY=y
-# CONFIG_PPC_PRPMC2800 is not set
-CONFIG_TSI108_BRIDGE=y
-CONFIG_MPIC=y
-CONFIG_MPIC_WEIRD=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-# CONFIG_KEXEC is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="holly.dts"
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 151c8e14f3a..27c46d67996 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,414 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:38 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
 CONFIG_LPARCFG=y
 CONFIG_PPC_ISERIES=y
-
-#
-# iSeries device drivers
-#
 CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_IBMVIO=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-CONFIG_PPC_INDIRECT_IO=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=m
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
 # CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
@@ -416,18 +85,9 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -436,857 +96,141 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
-CONFIG_SCSI_SRP_ATTRS=m
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
 CONFIG_ISERIES_VETH=y
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_ICOM=m
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_ISERIES=y
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
 CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 8ecacf74d3e..f39d0cf876d 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,1950 +1,170 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:25 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
-# CONFIG_STORCENTER is not set
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
-# CONFIG_PPC_C2K is not set
-CONFIG_MPC10X_BRIDGE=y
-CONFIG_MPC10X_OPENPIC=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-# CONFIG_GAMECUBE is not set
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
 CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
 CONFIG_NF_CONNTRACK_PPTP=m
-# CONFIG_NF_CONNTRACK_SANE is not set
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_MAC=m
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 CONFIG_NETFILTER_XT_MATCH_STATE=m
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
 CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=m
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
 CONFIG_PATA_IT821X=y
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
 CONFIG_PATA_SIL680=y
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
-# CONFIG_CRYPTO_TEA is not set
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index dc50eec58e7..2244d370f24 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,1084 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:45 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
 CONFIG_POWER4_ONLY=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-CONFIG_U3_DART=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_RTAS_FLASH is not set
-CONFIG_MMIO_NVRAM=y
-CONFIG_MPIC_U3_HT_IRQS=y
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_970_NAP=y
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
 CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
 CONFIG_AMD8111_ETH=y
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -1092,425 +105,41 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf-8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index b36ebb7e843..c4ed255af18 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,1258 +1,100 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:26 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
-# CONFIG_MPC8272_ADS is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_EP8248E is not set
 CONFIG_MGCOGE=y
-# CONFIG_PQ2ADS is not set
-CONFIG_8260=y
-CONFIG_8272=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_ERROR_LOGGING=y
-CONFIG_PPC_RTAS_DAEMON=y
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_8260=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
-CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
-# CONFIG_HVC_RTAS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
 # CONFIG_I2C_POWERMAC is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_CPM=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
 CONFIG_BDI_SWITCH=y
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 0dd5015ea81..f276c7cf555 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,1017 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:27 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
-# CONFIG_PPC_ADDER875 is not set
 CONFIG_PPC_MGSUVD=y
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
 CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
-CONFIG_8xx_CPU15=y
-# CONFIG_NO_UCODE_PATCH is not set
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
 CONFIG_I2C_SPI_SMC1_UCODE_PATCH=y
-CONFIG_UCODE_PATCH=y
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
 # CONFIG_FS_ENET_HAS_FEC is not set
-# CONFIG_FS_ENET_MDIO_FEC is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LKDTM is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig
index aa2654e6ede..62db8a3df16 100644
--- a/arch/powerpc/configs/mpc512x_defconfig
+++ b/arch/powerpc/configs/mpc512x_defconfig
@@ -1,641 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Fri Feb  5 11:48:29 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
 CONFIG_PPC_MPC512x=y
-CONFIG_PPC_MPC5121=y
 CONFIG_MPC5121_ADS=y
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=y
 CONFIG_CAN_DEV=y
-# CONFIG_CAN_CALC_BITTIMING is not set
 CONFIG_CAN_MSCAN=y
-# CONFIG_CAN_SJA1000 is not set
-
-#
-# CAN USB interfaces
-#
-# CONFIG_CAN_EMS_USB is not set
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
 CONFIG_MTD_NAND_MPC5121_NFC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_XIP=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -652,1042 +83,54 @@ CONFIG_LSI_ET1011C_PHY=y
 CONFIG_FIXED_PHY=y
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_MPC5121_FEC=y
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
 CONFIG_VIDEO_ADV_DEBUG=y
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=y
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
 CONFIG_VIDEO_SAA711X=y
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_RADIO_TEF6862 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_OF is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_FSL_DIU=y
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
-CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
-CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_RTC_DRV_MPC5121=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_FSL_DMA is not set
 CONFIG_MPC512X_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index f875ec21c91..7376e27b8ed 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,228 +1,12 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc1
-# Wed Mar 10 14:38:54 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
 CONFIG_PPC_MPC5200_SIMPLE=y
 CONFIG_PPC_EFIKA=y
@@ -232,1752 +16,121 @@ CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_GPIO=y
 CONFIG_PPC_MPC5200_LPBFIFO=m
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-# CONFIG_PPC_RTAS_DAEMON is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=y
-CONFIG_PPC_BESTCOMM_FEC=y
-CONFIG_PPC_BESTCOMM_GEN_BD=m
 CONFIG_SIMPLE_GPIO=y
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_PM_OPS=y
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_SPI=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=y
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC_MPC52xx=y
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_RTAS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_MPC5200_WDT is not set
-# CONFIG_WATCHDOG_RTAS is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
 CONFIG_DRM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_ORTEK=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_SOC=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=m
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index b1e88fe1d9f..3b9470883de 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,1262 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:28 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
-# CONFIG_PPC_C2K is not set
-CONFIG_TSI108_BRIDGE=y
-# CONFIG_GAMECUBE is not set
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-CONFIG_MPIC_WEIRD=y
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 6875fb89377..c7d68ff1a73 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,1278 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:29 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
-# CONFIG_PQ2FADS is not set
-# CONFIG_EP8248E is not set
-# CONFIG_MGCOGE is not set
-CONFIG_PQ2ADS=y
-CONFIG_8260=y
-CONFIG_8272=y
-CONFIG_PQ2_ADS_PCI_PIC=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_8260=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
 CONFIG_PPP=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
 CONFIG_PPP_SYNC_TTY=y
 CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index bbe5ae61d97..5b1b10fd974 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,228 +1,15 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:30 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_FSL_EMB_PERFMON is not set
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_REDBOOT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
@@ -235,1559 +22,111 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
-# CONFIG_KMETER1 is not set
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_IPIC=y
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_MCU_MPC8349EMITX is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_GTM=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
 CONFIG_INET_ESP=y
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_FHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index cfebef9f912..c3b113b2ca3 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,237 +1,23 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:31 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
+CONFIG_PHYS_64BIT=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -239,6 +25,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_P1022_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
@@ -249,146 +36,27 @@ CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_CPM2=y
-CONFIG_FSL_ULI1575=y
-CONFIG_CPM=y
 CONFIG_MPC8xxx_GPIO=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_SWIOTLB=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
 CONFIG_RAPIDIO=y
-CONFIG_RAPIDIO_DISC_TIMEOUT=30
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -403,1508 +71,143 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
 CONFIG_INET_ESP=y
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
-CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_RIONET is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_CPM=m
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_FHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
 CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 # CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_UCC_SLOW=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_VIRQ_DEBUG=y
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index f5451d80f19..a075da2ea3f 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,241 +1,25 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:31 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_FSL_EMB_PERFMON=y
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PHYS_64BIT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_FSL_SOC_BOOKE=y
 CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
@@ -243,6 +27,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_P1022_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
@@ -253,147 +38,27 @@ CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
-# CONFIG_SBC8560 is not set
-# CONFIG_P4080_DS is not set
-CONFIG_TQM85xx=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_CPM2=y
-CONFIG_FSL_ULI1575=y
-CONFIG_CPM=y
 CONFIG_MPC8xxx_GPIO=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_SWIOTLB=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
 CONFIG_RAPIDIO=y
-CONFIG_RAPIDIO_DISC_TIMEOUT=30
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -408,1509 +73,143 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
 CONFIG_INET_ESP=y
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
-CONFIG_FS_ENET_HAS_FCC=y
-# CONFIG_FS_ENET_MDIO_FCC is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_RIONET is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_CPM is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=m
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_CPM=m
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_FHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_DMADEVICES=y
-# CONFIG_DMADEVICES_DEBUG is not set
-
-#
-# DMA Devices
-#
 CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 # CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_UCC_SLOW=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_VIRQ_DEBUG=y
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_CRYPTO_DEV_TALITOS=y
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index d8d3d1d60c8..668215cae89 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,1006 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:32 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
 CONFIG_MPC86XADS=y
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
-# CONFIG_PPC_ADDER875 is not set
-# CONFIG_PPC_MGSUVD is not set
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
 CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
-CONFIG_FS_ENET_HAS_SCC=y
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
-CONFIG_NETDEV_1000=y
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 624eae9a7e2..63b90d47788 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,382 +1,45 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:33 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_RCU_FAST_NO_HZ is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
 CONFIG_MPC8610_HPCD=y
-# CONFIG_GEF_PPC9A is not set
-# CONFIG_GEF_SBC310 is not set
 CONFIG_GEF_SBC610=y
-CONFIG_MPC8641=y
-CONFIG_MPC8610=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-CONFIG_MMIO_NVRAM=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_IOMMU_HELPER=y
-CONFIG_SWIOTLB=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -391,525 +54,41 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
 CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -917,940 +96,84 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
 CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 45bd499630d..f9b83481b00 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,942 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:34 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-CONFIG_MPC885ADS=y
-# CONFIG_PPC_EP88XC is not set
-# CONFIG_PPC_ADDER875 is not set
-# CONFIG_PPC_MGSUVD is not set
-
-#
-# Freescale Ethernet driver platform-specific options
-#
-CONFIG_MPC8xx_SECOND_ETH=y
-CONFIG_MPC8xx_SECOND_ETH_FEC2=y
-# CONFIG_MPC8xx_SECOND_ETH_SCC3 is not set
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
 CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_GPIO is not set
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
+CONFIG_PROC_DEVICETREE=y
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 74a7216183e..edd2d54c819 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,665 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc3
-# Tue Oct  6 10:27:18 2009
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_64=y
-# CONFIG_PPC_BOOK3E_64 is not set
-CONFIG_PPC_BOOK3S=y
 CONFIG_POWER4_ONLY=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-# CONFIG_VSX is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_64=y
-CONFIG_PPC_MM_SLICES=y
 # CONFIG_VIRT_CPU_ACCOUNTING is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-CONFIG_PPC_PERF_CTRS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_PASEMI=y
-
-#
-# PA Semi PWRficient options
-#
 CONFIG_PPC_PASEMI_IOMMU=y
-# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
-CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PPC_CELL_QPACE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_MPIC_BROKEN_REGREAD=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
-CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_NUMA is not set
-CONFIG_MAX_ACTIVE_REGIONS=256
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_HAS_HASH_64K=y
-# CONFIG_PPC_4K_PAGES is not set
-# CONFIG_PPC_16K_PAGES is not set
 CONFIG_PPC_64K_PAGES=y
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
-# CONFIG_PPC_SUBPAGE_PROT is not set
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_ELECTRA_CF=y
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
 CONFIG_MTD_SLRAM=y
 CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
 CONFIG_MTD_NAND_PASEMI=y
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_CHR_DEV_OSST=y
@@ -670,1461 +73,131 @@ CONFIG_CHR_DEV_SCH=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-CONFIG_ATA_GENERIC=y
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
 CONFIG_PATA_PCMCIA=y
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
-# CONFIG_PATA_SCH is not set
+CONFIG_ATA_GENERIC=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=y
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=4
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=y
-# CONFIG_SENSORS_LM87 is not set
 CONFIG_SENSORS_LM90=y
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
 CONFIG_DRM=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_TTM=y
-# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_R128 is not set
 CONFIG_DRM_RADEON=y
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-CONFIG_VGASTATE=y
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
 CONFIG_FB_VGA16=y
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=y
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_USX2Y=y
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_SL811_HCD=y
-# CONFIG_USB_SL811_CS is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_PASEMI=y
-# CONFIG_EDAC_CPC925 is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 753bb7912e2..ac4fc41035f 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,447 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Mon May 25 14:53:25 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
 CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
 CONFIG_APM_EMULATION=y
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=m
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_DCCP=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -451,27 +74,15 @@ CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
@@ -482,21 +93,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -504,94 +104,13 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -601,306 +120,62 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
-# CONFIG_BT_HCIBPA10X is not set
 CONFIG_BT_HCIBFUSB=m
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
 CONFIG_BLK_DEV_SL82C105=y
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 CONFIG_SCSI_AIC7XXX_OLD=m
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
-# CONFIG_MD_RAID456 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
 CONFIG_IEEE1394=m
 CONFIG_IEEE1394_OHCI1394=m
-# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
-# CONFIG_IEEE1394_ETH1394 is not set
 CONFIG_IEEE1394_RAWIO=m
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
 CONFIG_ADB_CUDA=y
 CONFIG_ADB_PMU=y
@@ -914,826 +189,111 @@ CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_THERM_WINDTUNNEL=m
 CONFIG_THERM_ADT746X=m
-# CONFIG_WINDFARM is not set
-# CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
 CONFIG_BMAC=y
-# CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-CONFIG_P54_COMMON=m
-# CONFIG_P54_USB is not set
-# CONFIG_P54_PCI is not set
-CONFIG_P54_LEDS=y
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
 CONFIG_B43=m
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-# CONFIG_B43_PCMCIA is not set
-CONFIG_B43_LEDS=y
-# CONFIG_B43_DEBUG is not set
 CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-CONFIG_B43LEGACY_LEDS=y
-CONFIG_B43LEGACY_DEBUG=y
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
 CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
 CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
+CONFIG_P54_COMMON=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_APPLETOUCH=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_PCI=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_PMACZILOG=m
 CONFIG_SERIAL_PMACZILOG_TTYS=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
 CONFIG_APM_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
 CONFIG_BATTERY_PMU=y
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
-# CONFIG_SSB_PCMCIAHOST is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
+CONFIG_HWMON=m
 CONFIG_AGP=m
 CONFIG_AGP_UNINORTH=m
 CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
 CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-# CONFIG_DRM_SAVAGE is not set
-CONFIG_VGASTATE=y
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
 CONFIG_FB_CONTROL=y
 CONFIG_FB_PLATINUM=y
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_CT65550=y
-# CONFIG_FB_ASILIANT is not set
 CONFIG_FB_IMSTT=y
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
 CONFIG_FB_ATY128=y
-CONFIG_FB_ATY128_BACKLIGHT=y
 CONFIG_FB_ATY=y
 CONFIG_FB_ATY_CT=y
-# CONFIG_FB_ATY_GENERIC_LCD is not set
 CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
 CONFIG_FB_3DFX=y
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_3DFX_I2C=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
 CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=m
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1748,503 +308,63 @@ CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index afb4d1bb2ba..93d7425ce6c 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -1,1436 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 13:54:06 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
 CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_4xx=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_PPC4xx_GPIO=y
-CONFIG_XILINX_VIRTEX=y
 CONFIG_ACADIA=y
 CONFIG_EP405=y
 CONFIG_HCU4=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y
-CONFIG_WALNUT=y
 CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
-CONFIG_PPC40x_SIMPLE=y
-CONFIG_405GP=y
-CONFIG_405EP=y
-CONFIG_405EX=y
-CONFIG_405EZ=y
-CONFIG_405GPR=y
-CONFIG_XILINX_VIRTEX_II_PRO=y
-CONFIG_XILINX_VIRTEX_4_FX=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_OF_RTC=y
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_XILINX_PCI is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=m
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_XILINX_SYSACE=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y
-CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y
-CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 CONFIG_XILINX_HWICAP=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_IBM_IIC=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_XILINX=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=m
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=m
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_PPC4XX is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index bd3d23fb4dd..cd446fba3fa 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,231 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc1
-# Mon Jan  4 13:42:17 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_32 is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
 CONFIG_44x=y
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
-CONFIG_4xx=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_PPC_DCR=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_PREEMPT_NOTIFIERS=y
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-CONFIG_PPC4xx_PCI_EXPRESS=y
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
-CONFIG_EBONY=y
 CONFIG_SAM440EP=y
 CONFIG_SEQUOIA=y
 CONFIG_TAISHAN=y
@@ -239,1358 +25,103 @@ CONFIG_REDWOOD=y
 CONFIG_EIGER=y
 CONFIG_YOSEMITE=y
 CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
-# CONFIG_XILINX_ML510 is not set
-CONFIG_PPC44x_SIMPLE=y
 CONFIG_PPC4xx_GPIO=y
-CONFIG_440EP=y
-CONFIG_440EPX=y
-CONFIG_440GRX=y
-CONFIG_440GP=y
-CONFIG_440GX=y
-CONFIG_440SPe=y
-CONFIG_460EX=y
-CONFIG_460SX=y
-CONFIG_IBM440EP_ERR42=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_XILINX_VIRTEX_5_FXT=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_OF_RTC=y
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_XILINX_PCI is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_STDBINUTILS=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_4xx_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=m
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=m
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=35000
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_XILINX_SYSACE=m
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
-CONFIG_IBM_NEW_EMAC_RXB=128
-CONFIG_IBM_NEW_EMAC_TXB=64
-CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
-# CONFIG_IBM_NEW_EMAC_DEBUG is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
 CONFIG_SERIO_XILINX_XPS_PS2=m
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 CONFIG_XILINX_HWICAP=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_IBM_IIC=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
 CONFIG_GPIO_XILINX=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_XILINX=m
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 # CONFIG_USB_OHCI_HCD_PCI is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=m
 CONFIG_UBIFS_FS_XATTR=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
 CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
 CONFIG_KVM_440=y
-# CONFIG_KVM_EXIT_TIMING is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTIO_BALLOON is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 369f4e02c5d..76736017cd3 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,491 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:56 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_VSX=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_HIBERNATE_64=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-CONFIG_PPC_DCR_MMIO=y
-CONFIG_PPC_DCR=y
-CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
-CONFIG_EEH=y
 CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
-CONFIG_CMM=y
 CONFIG_DTL=y
 CONFIG_PPC_ISERIES=y
-
-#
-# iSeries device drivers
-#
 CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
-CONFIG_VIOPATH=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
 CONFIG_PPC_PASEMI=y
-
-#
-# PA Semi PWRficient options
-#
 CONFIG_PPC_PASEMI_IOMMU=y
-# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
-CONFIG_PPC_PASEMI_MDIO=y
 CONFIG_PPC_PS3=y
-
-#
-# PS3 Platform Options
-#
-# CONFIG_PS3_ADVANCED is not set
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_VUART=y
-CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
-CONFIG_PS3_STORAGE=m
 CONFIG_PS3_DISK=m
 CONFIG_PS3_ROM=m
 CONFIG_PS3_FLASH=m
 CONFIG_PS3_LPM=m
-CONFIG_PPC_CELL=y
-CONFIG_PPC_CELL_COMMON=y
-CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
 CONFIG_PPC_CELLEB=y
 CONFIG_PPC_CELL_QPACE=y
-
-#
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=m
-CONFIG_SPU_FS_64K_LS=y
-# CONFIG_SPU_TRACE is not set
-CONFIG_SPU_BASE=y
-CONFIG_CBE_RAS=y
-CONFIG_PPC_IBM_CELL_RESETBUTTON=y
-CONFIG_PPC_IBM_CELL_POWERBUTTON=m
-CONFIG_CBE_THERM=m
-CONFIG_CBE_CPUFREQ=m
-CONFIG_CBE_CPUFREQ_PMI=m
-CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
-CONFIG_OPROFILE_CELL=y
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
-CONFIG_UDBG_RTAS_CONSOLE=y
-CONFIG_PPC_UDBG_BEAT=y
-CONFIG_XICS=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_U3_DART=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_ERROR_LOGGING=y
-CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
-CONFIG_PPC_PMI=m
-CONFIG_MMIO_NVRAM=y
-CONFIG_MPIC_U3_HT_IRQS=y
-CONFIG_MPIC_BROKEN_REGREAD=y
-CONFIG_IBMVIO=y
 CONFIG_IBMEBUS=y
-# CONFIG_PPC_MPC106 is not set
-CONFIG_PPC_970_NAP=y
-CONFIG_PPC_INDIRECT_IO=y
-CONFIG_GENERIC_IOMAP=y
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
 CONFIG_CPU_FREQ_PMAC64=y
-CONFIG_PPC_PASEMI_CPUFREQ=y
-CONFIG_AXON_RAM=m
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=8
-CONFIG_MAX_ACTIVE_REGIONS=256
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_PPC_HAS_HASH_64K=y
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_ELECTRA_CF=y
 CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
 CONFIG_NF_CONNTRACK_PPTP=m
-# CONFIG_NF_CONNTRACK_SANE is not set
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
@@ -493,7 +96,6 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
@@ -521,23 +123,14 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_SOCKET=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -549,20 +142,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -571,303 +154,40 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_CELLEB=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_IBMVFC_TRACE=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
-# CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCC is not set
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -876,1070 +196,200 @@ CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
 CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_RAWIO=y
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
-# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
 CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
 CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
-# CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBMVETH=m
-# CONFIG_IBM_NEW_EMAC is not set
-CONFIG_IBM_NEW_EMAC_ZMII=y
-CONFIG_IBM_NEW_EMAC_RGMII=y
-CONFIG_IBM_NEW_EMAC_TAH=y
-CONFIG_IBM_NEW_EMAC_EMAC4=y
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
 CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=m
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=m
-# CONFIG_ENIC is not set
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
-# CONFIG_NIU is not set
 CONFIG_PASEMI_MAC=y
 CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_ISERIES_VETH=m
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
 CONFIG_SERIAL_TXX9_CONSOLE=y
 CONFIG_SERIAL_JSM=m
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
-CONFIG_HVC_ISERIES=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
 CONFIG_IBM_BSR=m
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=m
 CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_MATROX_MULTIHEAD=y
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 CONFIG_FB_PS3=m
-CONFIG_FB_PS3_DEFAULT_SIZE_M=9
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_FB_LOGO_EXTRA=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
-CONFIG_SND_PS3=m
-CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
 CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
-# CONFIG_INFINIBAND_AMSO1100 is not set
 CONFIG_MLX4_INFINIBAND=m
-# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_PASEMI=y
-# CONFIG_EDAC_CELL is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PPC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_STATS=y
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_BTRFS_FS=m
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1977,219 +427,47 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_SCHED_TRACER=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_HCALL_STATS is not set
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
-# CONFIG_XMON_DEFAULT is not set
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 403e82e2e83..04ae0740b6d 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -1,449 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Fri Oct 16 11:37:15 2009
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_PPC_BOOK3S_64 is not set
 CONFIG_PPC_BOOK3E_64=y
-CONFIG_PPC_BOOK3E=y
-CONFIG_PPC_FPU=y
-CONFIG_BOOKE=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MMU_NOHASH_64=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-CONFIG_PPC_PERF_CTRS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
-# CONFIG_TASK_XACCT is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
-CONFIG_PROC_PID_CPUSET=y
-# CONFIG_CGROUP_CPUACCT is not set
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
-# CONFIG_PERF_COUNTERS is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-
-#
-# CPU Frequency drivers
-#
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-# CONFIG_NUMA is not set
-CONFIG_MAX_ACTIVE_REGIONS=256
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_PPC_HAS_HASH_64K is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
 CONFIG_NF_CONNTRACK_NETBIOS_NS=m
 CONFIG_NF_CONNTRACK_PPTP=m
-# CONFIG_NF_CONNTRACK_SANE is not set
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -454,7 +80,6 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -468,24 +93,14 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_SOCKET=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -497,20 +112,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -519,800 +124,100 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_LPFC_DEBUG_FS is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MULTICORE_RAID456 is not set
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
 CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_RAWIO=y
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_DV1394=m
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
 CONFIG_WINDFARM=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
-# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
@@ -1320,427 +225,50 @@ CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=m
 CONFIG_FB_MATROX_MAVEN=m
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-# CONFIG_INFINIBAND_USER_ACCESS is not set
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_IPATH is not set
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-# CONFIG_INFINIBAND_SRP is not set
 CONFIG_INFINIBAND_ISER=m
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
-# CONFIG_EDAC_CPC925 is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -1748,163 +276,45 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=y
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1942,257 +352,46 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_SCHED_TRACER=y
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_PPC_EMULATED_STATS is not set
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
-# CONFIG_XMON_DEFAULT is not set
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 12dc7c40961..9d64a6822d8 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1,215 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:37:01 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_6xx=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_REDBOOT=y
-CONFIG_HIBERNATE_32=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_FREEZER is not set
 CONFIG_CGROUP_DEVICE=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_CGROUP_MEM_RES_CTLR is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
 CONFIG_USER_NS=y
 CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
-CONFIG_BLK_DEV_BSG=y
 CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
-CONFIG_PPC_CHRP=y
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
 CONFIG_PPC_MPC52xx=y
-# CONFIG_PPC_MPC5200_SIMPLE is not set
 CONFIG_PPC_EFIKA=y
-# CONFIG_PPC_LITE5200 is not set
 CONFIG_PPC_MPC5200_BUGFIX=y
 CONFIG_PPC_MPC5200_GPIO=y
-CONFIG_PPC_PMAC=y
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
 CONFIG_PQ2FADS=y
 CONFIG_EP8248E=y
 CONFIG_MGCOGE=y
-CONFIG_PQ2ADS=y
-CONFIG_8260=y
-CONFIG_8272=y
-CONFIG_PQ2_ADS_PCI_PIC=y
 CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
@@ -222,260 +51,84 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
-CONFIG_PPC_MPC831x=y
-CONFIG_PPC_MPC832x=y
-CONFIG_PPC_MPC834x=y
-CONFIG_PPC_MPC837x=y
 CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
 CONFIG_MPC8610_HPCD=y
 CONFIG_GEF_SBC610=y
-CONFIG_MPC8641=y
-CONFIG_MPC8610=y
-# CONFIG_EMBEDDED6xx is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_IPIC=y
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-CONFIG_PPC_RTAS=y
-# CONFIG_RTAS_ERROR_LOGGING is not set
-CONFIG_RTAS_PROC=y
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_PPC_MPC106=y
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
 CONFIG_CPU_FREQ_STAT=m
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# CPU Frequency drivers
-#
 CONFIG_CPU_FREQ_PMAC=y
-# CONFIG_PPC601_SYNC_FIX is not set
 CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
 CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
-CONFIG_CPM2=y
-CONFIG_FSL_ULI1575=y
-CONFIG_CPM=y
 CONFIG_PPC_BESTCOMM=y
-CONFIG_PPC_BESTCOMM_ATA=m
-CONFIG_PPC_BESTCOMM_FEC=m
-CONFIG_PPC_BESTCOMM_GEN_BD=m
 CONFIG_MPC8xxx_GPIO=y
-
-#
-# Kernel options
-#
+CONFIG_MCU_MPC8349EMITX=m
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_SCHED_HRTICK=y
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-CONFIG_APM_EMULATION=y
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
 CONFIG_ISA=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_GTM=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_8260=y
 CONFIG_PCIEPORTBUS=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
 CONFIG_PD6729=m
 CONFIG_I82092=m
 CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=y
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
-
-#
-# Advanced setup
-#
 CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_PAGE_OFFSET_BOOL is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 CONFIG_XFRM_SUB_POLICY=y
-CONFIG_XFRM_MIGRATE=y
 CONFIG_XFRM_STATISTICS=y
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
@@ -484,40 +137,18 @@ CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_PIMSM_V2=y
 CONFIG_NETLABEL=y
-CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
@@ -530,7 +161,6 @@ CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_TPROXY=m
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
@@ -539,7 +169,6 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
@@ -550,7 +179,6 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -569,8 +197,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_SOCKET=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -578,12 +204,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
 CONFIG_IP_NF_QUEUE=m
@@ -597,22 +217,10 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -622,10 +230,6 @@ CONFIG_IP_NF_SECURITY=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -637,18 +241,13 @@ CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_SECURITY=m
-
-#
-# DECnet: Netfilter Configuration
-#
-# CONFIG_DECNET_NF_GRABULATOR is not set
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -672,67 +271,24 @@ CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_NET_DCCPPROBE=m
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
-# CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 CONFIG_DECNET_ROUTER=y
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
-# CONFIG_LTPC is not set
-# CONFIG_COPS is not set
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -747,15 +303,9 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
@@ -764,7 +314,6 @@ CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
 CONFIG_NET_EMATCH_NBYTE=m
 CONFIG_NET_EMATCH_U32=m
@@ -781,52 +330,16 @@ CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
 CONFIG_KINGSUN_DONGLE=m
 CONFIG_KSDAZZLE_DONGLE=m
 CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
 CONFIG_USB_IRDA=m
 CONFIG_SIGMATEL_FIR=m
 CONFIG_NSC_FIR=m
@@ -846,13 +359,6 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -865,188 +371,47 @@ CONFIG_BT_HCIBT3C=m
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_MAC80211_DEBUGFS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
 CONFIG_NET_9P=m
 CONFIG_NET_9P_VIRTIO=m
-# CONFIG_NET_9P_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 CONFIG_PARPORT_SERIAL=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PNP=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-# CONFIG_PNPACPI is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
 CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
 CONFIG_VIRTIO_BLK=m
 CONFIG_BLK_DEV_HD=y
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-CONFIG_EEPROM_93CX6=m
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
 CONFIG_ENCLOSURE_SERVICES=m
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
+CONFIG_SENSORS_TSL2550=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_MAX6875=m
+CONFIG_EEPROM_93CX6=m
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_PCIBUS_ORDER is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
@@ -1055,171 +420,40 @@ CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_ENCLOSURE=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_SRP_TGT_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_MESH=m
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=m
 CONFIG_SCSI_SRP=m
 CONFIG_SCSI_LOWLEVEL_PCMCIA=y
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
 CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
-# CONFIG_SCSI_DH_ALUA is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=m
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-CONFIG_ATA_PIIX=m
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
 CONFIG_PDC_ADMA=m
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-CONFIG_ATA_GENERIC=m
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
 CONFIG_PATA_MPC52xx=m
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+CONFIG_ATA_PIIX=m
 CONFIG_PATA_OPTIDMA=m
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
+CONFIG_PATA_SCH=m
 CONFIG_PATA_VIA=m
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=m
 CONFIG_PATA_OF_PLATFORM=m
-CONFIG_PATA_SCH=m
+CONFIG_ATA_GENERIC=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
@@ -1229,24 +463,10 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
 CONFIG_FIREWIRE=m
 CONFIG_FIREWIRE_OHCI=m
-CONFIG_FIREWIRE_OHCI_DEBUG=y
 CONFIG_FIREWIRE_SBP2=m
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
 CONFIG_ADB_CUDA=y
 CONFIG_ADB_PMU=y
@@ -1255,14 +475,12 @@ CONFIG_ADB_PMU_LED_IDE=y
 CONFIG_PMAC_APM_EMU=y
 CONFIG_PMAC_MEDIABAY=y
 CONFIG_PMAC_BACKLIGHT=y
-# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
 CONFIG_ADB_MACIO=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_THERM_WINDTUNNEL=m
 CONFIG_THERM_ADT746X=m
 CONFIG_WINDFARM=y
-# CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
 CONFIG_IFB=m
@@ -1273,12 +491,6 @@ CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NET_SB1000=m
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -1289,79 +501,36 @@ CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 CONFIG_REALTEK_PHY=m
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
 CONFIG_MACE=m
-# CONFIG_MACE_AAUI_PORT is not set
 CONFIG_BMAC=m
 CONFIG_HAPPYMEAL=m
 CONFIG_SUNGEM=m
 CONFIG_CASSINI=m
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
 CONFIG_EL3=m
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
-# CONFIG_LANCE is not set
 CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
 CONFIG_ULTRA=m
-# CONFIG_SMC9194 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=m
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
 CONFIG_DE4X5=m
 CONFIG_WINBOND_840=m
 CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_ISA=y
-# CONFIG_E2100 is not set
 CONFIG_EWRK3=m
-# CONFIG_EEXPRESS is not set
-# CONFIG_EEXPRESS_PRO is not set
-# CONFIG_HPLAN_PLUS is not set
-# CONFIG_HPLAN is not set
-# CONFIG_LP486E is not set
-# CONFIG_ETH16I is not set
 CONFIG_NE2000=m
-# CONFIG_ZNET is not set
-# CONFIG_SEEQ8005 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 CONFIG_AMD8111_ETH=m
 CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 CONFIG_B44=m
-CONFIG_B44_PCI_AUTOSELECT=y
-CONFIG_B44_PCICORE_AUTOSELECT=y
-CONFIG_B44_PCI=y
 CONFIG_FORCEDETH=m
-CONFIG_FORCEDETH_NAPI=y
-# CONFIG_CS89x0 is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=m
 CONFIG_FEALNX=m
 CONFIG_NATSEMI=m
@@ -1369,14 +538,11 @@ CONFIG_NE2K_PCI=m
 CONFIG_8139CP=m
 CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
 CONFIG_8139TOO_8129=y
-# CONFIG_8139_OLD_RX_RESET is not set
 CONFIG_R6040=m
 CONFIG_SIS900=m
 CONFIG_EPIC100=m
 CONFIG_SUNDANCE=m
-# CONFIG_SUNDANCE_MMIO is not set
 CONFIG_TLAN=m
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
@@ -1385,18 +551,12 @@ CONFIG_NET_POCKET=y
 CONFIG_DE600=m
 CONFIG_DE620=m
 CONFIG_FEC_MPC52xx=m
-CONFIG_FEC_MPC52xx_MDIO=y
-# CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
 CONFIG_E1000E=m
 CONFIG_IP1000=m
 CONFIG_IGB=m
-CONFIG_IGB_LRO=y
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
@@ -1404,70 +564,42 @@ CONFIG_R8169=m
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
-# CONFIG_SKGE_DEBUG is not set
 CONFIG_SKY2=m
-# CONFIG_SKY2_DEBUG is not set
 CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
 CONFIG_GIANFAR=m
-# CONFIG_UCC_GETH is not set
 CONFIG_MV643XX_ETH=m
 CONFIG_QLA3XXX=m
 CONFIG_ATL1=m
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T1_1G=y
 CONFIG_CHELSIO_T3=m
-# CONFIG_ENIC is not set
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_NIU=m
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
 CONFIG_TEHUTI=m
 CONFIG_BNX2X=m
 CONFIG_QLGE=m
 CONFIG_SFC=m
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
 CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -1477,106 +609,37 @@ CONFIG_PCMCIA_NMCLAN=m
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 CONFIG_PCMCIA_AXNET=m
-# CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 CONFIG_ATM_LANAI=m
 CONFIG_ATM_ENI=m
-# CONFIG_ATM_ENI_DEBUG is not set
-# CONFIG_ATM_ENI_TUNE_BURST is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
 CONFIG_ATM_NICSTAR=m
-# CONFIG_ATM_NICSTAR_USE_SUNI is not set
-# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
 CONFIG_ATM_IDT77252=m
-# CONFIG_ATM_IDT77252_DEBUG is not set
-# CONFIG_ATM_IDT77252_RCV_ALL is not set
-CONFIG_ATM_IDT77252_USE_SUNI=y
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
 CONFIG_ATM_HE=m
-# CONFIG_ATM_HE_USE_SUNI is not set
 CONFIG_FDDI=y
-# CONFIG_DEFXX is not set
 CONFIG_SKFP=m
-# CONFIG_HIPPI is not set
 CONFIG_PLIP=m
-CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_PPPOATM=m
-CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
-# CONFIG_SLIP_MODE_SLIP6 is not set
 CONFIG_NET_FC=y
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
 CONFIG_VIRTIO_NET=m
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
 CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
 CONFIG_JOYSTICK_A3D=m
@@ -1612,7 +675,6 @@ CONFIG_TABLET_USB_AIPTEK=m
 CONFIG_TABLET_USB_GTCO=m
 CONFIG_TABLET_USB_KBTAB=m
 CONFIG_TABLET_USB_WACOM=m
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
 CONFIG_INPUT_ATI_REMOTE=m
@@ -1622,249 +684,72 @@ CONFIG_INPUT_POWERMATE=m
 CONFIG_INPUT_YEALINK=m
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
 CONFIG_GAMEPORT_EMU10K1=m
 CONFIG_GAMEPORT_FM801=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
 CONFIG_ROCKETPORT=m
 CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
 CONFIG_SYNCLINK=m
 CONFIG_SYNCLINKMP=m
 CONFIG_SYNCLINK_GT=m
 CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
 CONFIG_NOZOMI=m
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_CS=m
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_UARTLITE=m
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_PMACZILOG=m
-# CONFIG_SERIAL_PMACZILOG_TTYS is not set
-# CONFIG_SERIAL_CPM is not set
 CONFIG_SERIAL_MPC52xx=y
 CONFIG_SERIAL_MPC52xx_CONSOLE=y
 CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
 CONFIG_SERIAL_JSM=m
 CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_BRIQ_PANEL=m
 CONFIG_PRINTER=m
 CONFIG_LP_CONSOLE=y
 CONFIG_PPDEV=m
-# CONFIG_HVC_RTAS is not set
-# CONFIG_VIRTIO_CONSOLE is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_NVRAM=y
 CONFIG_DTLK=m
 CONFIG_R3964=m
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
 CONFIG_CARDMAN_4000=m
 CONFIG_CARDMAN_4040=m
 CONFIG_IPWIRELESS=m
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# Mac SMBus host controller drivers
-#
 CONFIG_I2C_HYDRA=m
-CONFIG_I2C_POWERMAC=y
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_CPM is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=m
-# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PCA_PLATFORM=m
 CONFIG_I2C_SIMTEC=m
-
-#
-# External I2C/SMBus adapter drivers
-#
 CONFIG_I2C_PARPORT=m
 CONFIG_I2C_PARPORT_LIGHT=m
-# CONFIG_I2C_TAOS_EVM is not set
 CONFIG_I2C_TINY_USB=m
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-CONFIG_I2C_VOODOO3=m
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
 CONFIG_I2C_PCA_ISA=m
-CONFIG_I2C_PCA_PLATFORM=m
 CONFIG_I2C_STUB=m
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_PCF8575=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_TPS65010 is not set
-CONFIG_EEPROM_MAX6875=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_MCU_MPC8349EMITX=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_W1=m
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_MATROX is not set
 CONFIG_W1_MASTER_DS2490=m
 CONFIG_W1_MASTER_DS2482=m
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=m
 CONFIG_W1_SLAVE_SMEM=m
 CONFIG_W1_SLAVE_DS2433=m
 CONFIG_W1_SLAVE_DS2433_CRC=y
 CONFIG_W1_SLAVE_DS2760=m
-CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
 CONFIG_APM_POWER=m
-# CONFIG_BATTERY_DS2760 is not set
 CONFIG_BATTERY_PMU=m
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_AD7414 is not set
 CONFIG_SENSORS_AD7418=m
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1873,13 +758,9 @@ CONFIG_SENSORS_ADM1029=m
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
 CONFIG_SENSORS_ADT7470=m
-CONFIG_SENSORS_ADT7473=m
 CONFIG_SENSORS_AMS=m
-CONFIG_SENSORS_AMS_PMU=y
-CONFIG_SENSORS_AMS_I2C=y
 CONFIG_SENSORS_ATXP1=m
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_I5K_AMB is not set
 CONFIG_SENSORS_F71805F=m
 CONFIG_SENSORS_F71882FG=m
 CONFIG_SENSORS_F75375S=m
@@ -1901,6 +782,7 @@ CONFIG_SENSORS_MAX1619=m
 CONFIG_SENSORS_MAX6650=m
 CONFIG_SENSORS_PC87360=m
 CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_PCF8591=m
 CONFIG_SENSORS_SIS5595=m
 CONFIG_SENSORS_DME1737=m
 CONFIG_SENSORS_SMSC47M1=m
@@ -1919,465 +801,14 @@ CONFIG_SENSORS_W83L785TS=m
 CONFIG_SENSORS_W83L786NG=m
 CONFIG_SENSORS_W83627HF=m
 CONFIG_SENSORS_W83627EHF=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=m
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_MPC5200_WDT is not set
-# CONFIG_8xxx_WDT is not set
 CONFIG_WATCHDOG_RTAS=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
 CONFIG_USBPCWATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SSB=m
-CONFIG_SSB_SPROM=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
-CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 CONFIG_SSB_PCMCIAHOST=y
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_DRIVER_PCICORE=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=m
 CONFIG_MFD_SM501_GPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_MT2131=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEOBUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=m
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS5345=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_M52790=m
-CONFIG_VIDEO_TLV320AIC23B=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_WM8739=m
-CONFIG_VIDEO_VP27SMPX=m
-
-#
-# Video decoders
-#
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_BT866=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_OV7670=m
-CONFIG_VIDEO_TCM825X=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA7111=m
-CONFIG_VIDEO_SAA7114=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_SAA717X=m
-CONFIG_VIDEO_SAA7191=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_VPX3220=m
-
-#
-# Video and audio decoders
-#
-CONFIG_VIDEO_CX25840=m
-
-#
-# MPEG video encoders
-#
-CONFIG_VIDEO_CX2341X=m
-
-#
-# Video encoders
-#
-CONFIG_VIDEO_SAA7127=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-
-#
-# Video improvement chips
-#
-CONFIG_VIDEO_UPD64031A=m
-CONFIG_VIDEO_UPD64083=m
-# CONFIG_VIDEO_VIVI is not set
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_SAA6588=m
-# CONFIG_VIDEO_PMS is not set
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_VP3054=m
-CONFIG_VIDEO_CX23885=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_IVTV=m
-CONFIG_VIDEO_FB_IVTV=m
-CONFIG_VIDEO_CX18=m
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_MT9M001=m
-# CONFIG_MT9M001_PCA9536_SWITCH is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-CONFIG_SOC_CAMERA_MT9V022=m
-# CONFIG_MT9V022_PCA9536_SWITCH is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_EM28XX=m
-CONFIG_VIDEO_EM28XX_ALSA=m
-CONFIG_VIDEO_EM28XX_DVB=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-CONFIG_USB_DSBR=m
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_TTPCI_EEPROM=m
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET_CORE=m
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported SDMC DM1105 Adapters
-#
-CONFIG_DVB_DM1105=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0288=m
-CONFIG_DVB_STB6000=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-CONFIG_DVB_CX24116=m
-CONFIG_DVB_SI21XX=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6405=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_LGS8GL5=m
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
 CONFIG_AGP=y
 CONFIG_AGP_UNINORTH=y
 CONFIG_DRM=m
@@ -2388,152 +819,62 @@ CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
 CONFIG_DRM_VIA=m
 CONFIG_DRM_SAVAGE=m
-CONFIG_VGASTATE=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_SVGALIB=m
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_CIRRUS=m
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
 CONFIG_FB_PLATINUM=y
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_CT65550=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
 CONFIG_FB_RIVA=m
-# CONFIG_FB_RIVA_I2C is not set
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=m
 CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_MATROX_MULTIHEAD=y
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
 CONFIG_FB_ATY128=y
-CONFIG_FB_ATY128_BACKLIGHT=y
 CONFIG_FB_ATY=y
 CONFIG_FB_ATY_CT=y
 CONFIG_FB_ATY_GENERIC_LCD=y
 CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
 CONFIG_FB_S3=m
 CONFIG_FB_SAVAGE=m
 CONFIG_FB_SAVAGE_I2C=y
 CONFIG_FB_SAVAGE_ACCEL=y
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
 CONFIG_FB_NEOMAGIC=m
 CONFIG_FB_KYRO=m
 CONFIG_FB_3DFX=m
 CONFIG_FB_3DFX_ACCEL=y
 CONFIG_FB_VOODOO1=m
-# CONFIG_FB_VT8623 is not set
 CONFIG_FB_TRIDENT=m
-CONFIG_FB_TRIDENT_ACCEL=y
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_FSL_DIU is not set
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=m
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
 CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
 CONFIG_SND_DEBUG_VERBOSE=y
 CONFIG_SND_PCM_XRUN_DEBUG=y
-CONFIG_SND_VMASTER=y
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_VX_LIB=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
@@ -2543,40 +884,6 @@ CONFIG_SND_MPU401=m
 CONFIG_SND_PORTMAN2X4=m
 CONFIG_SND_AC97_POWER_SAVE=y
 CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
-CONFIG_SND_SB_COMMON=m
-CONFIG_SND_SB16_DSP=m
-CONFIG_SND_ISA=y
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_SC6000 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_PCI=y
 CONFIG_SND_AD1889=m
 CONFIG_SND_ALS300=m
 CONFIG_SND_ALS4000=m
@@ -2589,14 +896,11 @@ CONFIG_SND_AU8830=m
 CONFIG_SND_AW2=m
 CONFIG_SND_AZT3328=m
 CONFIG_SND_BT87X=m
-# CONFIG_SND_BT87X_OVERCLOCK is not set
 CONFIG_SND_CA0106=m
 CONFIG_SND_CMIPCI=m
-CONFIG_SND_OXYGEN_LIB=m
 CONFIG_SND_OXYGEN=m
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
-CONFIG_SND_CS46XX_NEW_DSP=y
 CONFIG_SND_CS5530=m
 CONFIG_SND_DARLA20=m
 CONFIG_SND_GINA20=m
@@ -2617,16 +921,11 @@ CONFIG_SND_ENS1371=m
 CONFIG_SND_ES1938=m
 CONFIG_SND_ES1968=m
 CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
-# CONFIG_SND_HDA_INTEL is not set
 CONFIG_SND_HDSP=m
 CONFIG_SND_HDSPM=m
 CONFIG_SND_HIFIER=m
 CONFIG_SND_ICE1712=m
 CONFIG_SND_ICE1724=m
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
 CONFIG_SND_KORG1212=m
 CONFIG_SND_MAESTRO3=m
 CONFIG_SND_MIXART=m
@@ -2642,158 +941,62 @@ CONFIG_SND_VIA82XX=m
 CONFIG_SND_VIA82XX_MODEM=m
 CONFIG_SND_VIRTUOSO=m
 CONFIG_SND_VX222=m
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
-CONFIG_SND_POWERMAC_AUTO_DRC=y
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
 CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
-CONFIG_SND_AOA_SOUNDBUS=m
-CONFIG_SND_AOA_SOUNDBUS_I2S=m
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_USX2Y=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 # CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
 CONFIG_PANTHERLORD_FF=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_STORAGE_CYPRESS_ATACB=y
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
 CONFIG_USB_SERIAL_ARK3116=m
@@ -2801,7 +1004,6 @@ CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -2811,7 +1013,6 @@ CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
 CONFIG_USB_SERIAL_IPW=m
 CONFIG_USB_SERIAL_IUU=m
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
@@ -2836,25 +1037,13 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-# CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_PHIDGET=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETMOTORCONTROL=m
-CONFIG_USB_PHIDGETSERVO=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
 CONFIG_USB_APPLEDISPLAY=m
@@ -2863,64 +1052,22 @@ CONFIG_USB_SISUSBVGA_CON=y
 CONFIG_USB_LD=m
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
-# CONFIG_USB_TEST is not set
 CONFIG_USB_ISIGHTFW=m
-CONFIG_USB_VST=m
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_XUSBATM=m
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 CONFIG_ACCESSIBILITY=y
 CONFIG_A11Y_BRAILLE_CONSOLE=y
-# CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
-
-#
-# Reporting subsystems
-#
-# CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=m
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_DS1374=m
 CONFIG_RTC_DRV_DS1672=m
@@ -2932,75 +1079,33 @@ CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_PCF8583=m
 CONFIG_RTC_DRV_M41T80=m
 CONFIG_RTC_DRV_M41T80_WDT=y
-# CONFIG_RTC_DRV_S35390A is not set
 CONFIG_RTC_DRV_FM3130=m
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
 CONFIG_RTC_DRV_DS1511=m
 CONFIG_RTC_DRV_DS1553=m
 CONFIG_RTC_DRV_DS1742=m
 CONFIG_RTC_DRV_STK17TA8=m
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_M48T35=m
 CONFIG_RTC_DRV_M48T59=m
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=m
-
-#
-# on-CPU RTC drivers
-#
-CONFIG_RTC_DRV_PPC=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_FSL_DMA is not set
 CONFIG_AUXDISPLAY=y
 CONFIG_KS0108=m
-CONFIG_KS0108_PORT=0x378
-CONFIG_KS0108_DELAY=2
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_UIO_PDRV=m
 CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_UIO_SMX=m
-# CONFIG_UIO_SERCOS3 is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
 CONFIG_JBD2_DEBUG=y
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
@@ -3008,123 +1113,58 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
 CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
-CONFIG_OCFS2_FS_STATS=y
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
 CONFIG_OMFS_FS=m
-# CONFIG_HPFS_FS is not set
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_UPCALL=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-CONFIG_CIFS_EXPERIMENTAL=y
 CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_CIFS_EXPERIMENTAL=y
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
@@ -3135,31 +1175,18 @@ CONFIG_NCPFS_SMALLDOS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_AFS_FS is not set
 CONFIG_9P_FS=m
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
 CONFIG_OSF_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
 CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
 CONFIG_KARMA_PARTITION=y
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -3198,85 +1225,30 @@ CONFIG_NLS_ISO8859_14=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
 CONFIG_DLM_DEBUG=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_OBJECTS=y
-# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
 CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_WRITECOUNT=y
-CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
-CONFIG_FRAME_POINTER=y
-CONFIG_BOOT_PRINTK_DELAY=y
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
 CONFIG_FAULT_INJECTION=y
 CONFIG_FAILSLAB=y
 CONFIG_FAIL_PAGE_ALLOC=y
@@ -3286,116 +1258,32 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
 CONFIG_SCHED_TRACER=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_BOOT_TRACER is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
-# CONFIG_BUILD_DOCSRC is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
 CONFIG_XMON=y
-# CONFIG_XMON_DEFAULT is not set
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_NETWORK_XFRM=y
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
 CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-# CONFIG_SECURITY_SMACK is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -3406,18 +1294,10 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -3425,26 +1305,11 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_HIFN_795X=m
 CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
 CONFIG_CRYPTO_DEV_TALITOS=m
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
 CONFIG_VIRTUALIZATION=y
-CONFIG_VIRTIO=m
-CONFIG_VIRTIO_RING=m
 CONFIG_VIRTIO_PCI=m
 CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 12c8ee8dd12..a4353bef31c 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,1401 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:35 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-CONFIG_DEFAULT_UIMAGE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_PPC_82xx=y
-# CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
-# CONFIG_EP8248E is not set
-# CONFIG_MGCOGE is not set
-CONFIG_PQ2ADS=y
-CONFIG_8260=y
-CONFIG_PQ2_ADS_PCI_PIC=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_EMBEDDED6xx is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-CONFIG_CPM2=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_8260=y
 # CONFIG_8260_PCI9 is not set
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
 CONFIG_PPP=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
 CONFIG_PPP_SYNC_TTY=y
 CONFIG_PPP_DEFLATE=y
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_SCH is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_PCBC=y
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-CONFIG_PPC_CLOCK=y
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index a18f597c6e5..cd80fb615d3 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,1781 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:36 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_CHECK_CACHE_COHERENCY=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_STORCENTER is not set
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
-# CONFIG_PPC_C2K is not set
-CONFIG_MV64X60=y
-# CONFIG_GAMECUBE is not set
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
 CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_OF_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_KSZ884X_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_XILINX_EMACLITE is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-CONFIG_CHELSIO_T4_DEPENDS=y
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_MPSC=y
 CONFIG_SERIAL_MPSC_CONSOLE=y
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_MPC is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-CONFIG_HID_MICROSOFT=y
-# CONFIG_HID_MOSART is not set
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_ORTEK=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
-# CONFIG_HID_QUANTA is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_HID_ZEROPLUS=y
 CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
 CONFIG_RTC_DRV_MAX6900=y
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 3808bc2be86..49cffe00365 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,470 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc4
-# Thu Apr 15 11:32:15 2010
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_64=y
-# CONFIG_PPC_BOOK3E_64 is not set
-CONFIG_PPC_BOOK3S=y
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
-# CONFIG_VSX is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_64=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=64
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_SYSCALL_WRAPPERS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
 CONFIG_PPC_PS3=y
-
-#
-# PS3 Platform Options
-#
-# CONFIG_PS3_ADVANCED is not set
-CONFIG_PS3_HTAB_SIZE=20
-# CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_VUART=y
-CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
-CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
 CONFIG_PS3_VRAM=m
 CONFIG_PS3_LPM=m
-CONFIG_PPC_CELL=y
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PPC_CELL_QPACE is not set
-
-#
-# Cell Broadband Engine options
-#
-CONFIG_SPU_FS=m
-CONFIG_SPU_FS_64K_LS=y
-CONFIG_SPU_BASE=y
-# CONFIG_PQ2ADS is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_U3_DART is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_HELPER=y
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA is not set
-CONFIG_MAX_ACTIVE_REGIONS=256
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
-CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
-# CONFIG_MEMORY_HOTREMOVE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_MIGRATION=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ARCH_MEMORY_PROBE=y
-CONFIG_PPC_HAS_HASH_64K=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE=""
-CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_ADVANCED_DEBUG is not set
-# CONFIG_PM_VERBOSE is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_PM_RUNTIME is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -474,1051 +60,133 @@ CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-CONFIG_CFG80211_WEXT=y
 # CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65535
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
 # CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_OF is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 CONFIG_FB_PS3=y
-CONFIG_FB_PS3_DEFAULT_SIZE_M=9
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_PS3=m
-CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
 CONFIG_HID_TWINHAN=m
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_HID_MAGICMOUSE is not set
 CONFIG_HID_MICROSOFT=m
-# CONFIG_HID_MOSART is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
 CONFIG_HID_SONY=m
-# CONFIG_HID_STANTUM is not set
 CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
 CONFIG_HID_SMARTJOYPLUS=m
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=m
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
 CONFIG_RTC_DRV_PS3=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_LOCKDEP=y
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-CONFIG_IRQSTACKS=y
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCRYPT is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_GHASH=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
 CONFIG_CRYPTO_SALSA20=m
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 16ae717d195..f87f0e15cfa 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,402 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:37:06 2008
-#
 CONFIG_PPC64=y
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-# CONFIG_TUNE_CELL is not set
-CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_VSX=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=128
-CONFIG_64BIT=y
-CONFIG_WORD_SIZE=64
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_ARCH_HAS_ILOG2_U64=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_TREE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
-# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-CONFIG_PPC_MSI_BITMAP=y
-
-#
-# Platform support
-#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
-CONFIG_EEH=y
 CONFIG_SCANLOG=m
-CONFIG_LPARCFG=y
 CONFIG_PPC_SMLPAR=y
-CONFIG_CMM=y
 CONFIG_DTL=y
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_MAPLE is not set
-# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_PS3 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_PPC_CELLEB is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_PPC_NATIVE=y
-# CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_XICS=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_U3_DART is not set
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_ERROR_LOGGING=y
-CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
-# CONFIG_MMIO_NVRAM is not set
-CONFIG_IBMVIO=y
 CONFIG_IBMEBUS=y
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
-
-#
-# Kernel options
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_COMPAT_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_IOMMU_VMERGE=y
-CONFIG_IOMMU_HELPER=y
 CONFIG_HOTPLUG_CPU=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=8
-CONFIG_MAX_ACTIVE_REGIONS=256
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_NEED_MULTIPLE_NODES=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
-CONFIG_MEMORY_HOTPLUG_SPARSE=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_NODES_SPAN_OTHER_NODES=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=m
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-# CONFIG_HAS_RAPIDIO is not set
-# CONFIG_RELOCATABLE is not set
-CONFIG_PAGE_OFFSET=0xc000000000000000
-CONFIG_KERNEL_START=0xc000000000000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
 CONFIG_NF_CT_PROTO_UDPLITE=m
-# CONFIG_NF_CONNTRACK_AMANDA is not set
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -421,7 +99,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -429,14 +106,7 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -448,262 +118,43 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=m
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_AMD74XX=y
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_IBMVFC_TRACE=y
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
-CONFIG_SCSI_IPR_TRACE=y
-CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
-# CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_ATA_SFF is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
@@ -712,1092 +163,189 @@ CONFIG_MD_RAID456=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_IBMVETH=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
 CONFIG_E1000E=y
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=y
-# CONFIG_ENIC is not set
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
 CONFIG_S2IO=m
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
-# CONFIG_NIU is not set
 CONFIG_MLX4_EN=m
-CONFIG_MLX4_CORE=m
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-# CONFIG_IBMOL is not set
-# CONFIG_3C359 is not set
-# CONFIG_TMS380TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_ICOM=m
 CONFIG_SERIAL_JSM=m
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
 CONFIG_IBM_BSR=m
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=1024
-# CONFIG_HANGCHECK_TIMER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=y
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-CONFIG_FB_MACMODES=y
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
 CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_PLATFORM=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
-CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-CONFIG_INFINIBAND_IPATH=m
 CONFIG_INFINIBAND_EHCA=m
-# CONFIG_INFINIBAND_AMSO1100 is not set
 CONFIG_MLX4_INFINIBAND=m
-# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
 CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
-CONFIG_OCFS2_FS_O2CB=m
-CONFIG_OCFS2_FS_STATS=y
-CONFIG_OCFS2_DEBUG_MASKLOG=y
-# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
 CONFIG_BTRFS_FS=m
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
 CONFIG_IRQSOFF_TRACER=y
 CONFIG_SCHED_TRACER=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_BOOT_TRACER is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-CONFIG_DYNAMIC_PRINTK_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_HCALL_STATS is not set
 CONFIG_CODE_PATCHING_SELFTEST=y
 CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-CONFIG_XMON_DISASSEMBLY=y
-CONFIG_DEBUGGER=y
-CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 01be0e207f4..4f0c10a62b9 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,1403 +1,100 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc5
-# Mon Apr 19 23:16:37 2010
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_NR_IRQS=512
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
 CONFIG_STORCENTER=y
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
-# CONFIG_PPC_C2K is not set
-CONFIG_MPC10X_BRIDGE=y
-CONFIG_MPC10X_OPENPIC=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-# CONFIG_GAMECUBE is not set
-# CONFIG_WII is not set
-# CONFIG_AMIGAONE is not set
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_KEXEC is not set
-# CONFIG_CRASH_DUMP is not set
 CONFIG_SPARSE_IRQ=y
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_NEED_DMA_MAP_STATE is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_TASK_SIZE=0xc0000000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PHYSMAP_OF is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
+CONFIG_PROC_DEVICETREE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_AIRO is not set
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_EXPORTFS=m
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_ASYNC_PQ=y
-CONFIG_ASYNC_RAID6_RECOV=y
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig
new file mode 100644
index 00000000000..d0a5b676388
--- /dev/null
+++ b/arch/powerpc/configs/tqm8xx_defconfig
@@ -0,0 +1,86 @@
+CONFIG_PPC_8xx=y
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_TQM8XX=y
+CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_CPU15 is not set
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_8XX_MINIMAL_FPEMU=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_SECCOMP is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_FS_ENET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_GEN_RTC=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_CRC32 is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/powerpc/configs/wii_defconfig b/arch/powerpc/configs/wii_defconfig
index ee054f8118b..bb8ba75b7c6 100644
--- a/arch/powerpc/configs/wii_defconfig
+++ b/arch/powerpc/configs/wii_defconfig
@@ -1,1405 +1,142 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sun Nov 22 20:37:21 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-CONFIG_PPC_BOOK3S_32=y
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_PPC_BOOK3S=y
-CONFIG_6xx=y
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_STD_MMU_32=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_PPC_HAVE_PMU_SUPPORT=y
-CONFIG_PPC_PERF_CTRS=y
-# CONFIG_SMP is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DTC=y
-# CONFIG_DEFAULT_UIMAGE is not set
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-wii"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
 CONFIG_PERF_COUNTERS=y
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
 # CONFIG_PPC_CHRP is not set
-# CONFIG_MPC5121_ADS is not set
-# CONFIG_MPC5121_GENERIC is not set
-# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
-# CONFIG_LINKSTATION is not set
-# CONFIG_STORCENTER is not set
-# CONFIG_MPC7448HPC2 is not set
-# CONFIG_PPC_HOLLY is not set
-# CONFIG_PPC_PRPMC2800 is not set
-# CONFIG_PPC_C2K is not set
-CONFIG_GAMECUBE_COMMON=y
-CONFIG_USBGECKO_UDBG=y
-CONFIG_FLIPPER_PIC=y
-# CONFIG_GAMECUBE is not set
-CONFIG_HLWD_PIC=y
-CONFIG_STARLET_MINI=y
 CONFIG_WII=y
-# CONFIG_AMIGAONE is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
-# CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_TAU is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
-# CONFIG_SWIOTLB is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
-# CONFIG_CRASH_DUMP is not set
-CONFIG_MAX_ACTIVE_REGIONS=32
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
 CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_PAGE_OFFSET_BOOL is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0xc0000000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=y
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_ETHOC is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_XILINX_EMACLITE is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
 CONFIG_B43=y
 CONFIG_B43_SDIO=y
-CONFIG_B43_PIO=y
 # CONFIG_B43_PHY_LP is not set
 CONFIG_B43_DEBUG=y
-# CONFIG_B43_FORCE_PIO is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_XILINX is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-CONFIG_SSB_SDIOHOST=y
-# CONFIG_SSB_SILENT is not set
 CONFIG_SSB_DEBUG=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_OF is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_PPC=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_APPLE=m
 CONFIG_HID_WACOM=m
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_OF is not set
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_GENERIC=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACER_MAX_TRACE=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_GENERIC_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
 CONFIG_SCHED_TRACER=y
-CONFIG_BOOT_TRACER=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 CONFIG_DMA_API_DEBUG=y
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-CONFIG_PPC_WERROR=y
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-CONFIG_PPC_EARLY_DEBUG_USBGECKO=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
index 9a846efe638..5ab0b71531b 100644
--- a/arch/powerpc/include/asm/abs_addr.h
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -69,7 +69,7 @@ static inline unsigned long phys_to_abs(unsigned long pa)
  * Legacy iSeries Hypervisor calls
  */
 #define iseries_hv_addr(virtaddr)	\
-	(0x8000000000000000 | virt_to_abs(virtaddr))
+	(0x8000000000000000UL | virt_to_abs(virtaddr))
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
index 2048a6aeea9..decad950f11 100644
--- a/arch/powerpc/include/asm/asm-compat.h
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -30,6 +30,7 @@
 #define PPC_STLCX	stringify_in_c(stdcx.)
 #define PPC_CNTLZL	stringify_in_c(cntlzd)
 #define PPC_LR_STKOFF	16
+#define PPC_MIN_STKFRM	112
 
 /* Move to CR, single-entry optimized version. Only available
  * on POWER4 and later.
@@ -55,6 +56,7 @@
 #define PPC_CNTLZL	stringify_in_c(cntlzw)
 #define PPC_MTOCRF	stringify_in_c(mtcrf)
 #define PPC_LR_STKOFF	4
+#define PPC_MIN_STKFRM	16
 
 #endif
 
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index b0b21134f61..3a40a992e59 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -197,6 +197,7 @@ extern const char *powerpc_base_platform;
 #define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
 #define CPU_FTR_CP_USE_DCBTZ		LONG_ASM_CONST(0x0040000000000000)
 #define CPU_FTR_UNALIGNED_LD_STD	LONG_ASM_CONST(0x0080000000000000)
+#define CPU_FTR_ASYM_SMT		LONG_ASM_CONST(0x0100000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -412,7 +413,7 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
 	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
 	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
-	    CPU_FTR_DSCR | CPU_FTR_SAO)
+	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -517,6 +518,10 @@ static inline int cpu_has_feature(unsigned long feature)
 		& feature);
 }
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#define HBP_NUM 1
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 501189a543d..0893ab9343a 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -27,10 +27,10 @@ enum ppc_dbell {
 	PPC_G_DBELL_MC = 4,	/* guest mcheck doorbell */
 };
 
-#ifdef CONFIG_SMP
-extern unsigned long dbell_smp_message[NR_CPUS];
-extern void smp_dbell_message_pass(int target, int msg);
-#endif
+extern void doorbell_message_pass(int target, int msg);
+extern void doorbell_exception(struct pt_regs *regs);
+extern void doorbell_check_self(void);
+extern void doorbell_setup_this_cpu(void);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
 {
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index a74c4ee6c02..d10d64a4be3 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -62,7 +62,7 @@ extern void *kmap_high(struct page *page);
 extern void kunmap_high(struct page *page);
 extern void *kmap_atomic_prot(struct page *page, enum km_type type,
 			      pgprot_t prot);
-extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
 
 static inline void *kmap(struct page *page)
 {
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 5119b7db314..de03ca58db5 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -74,6 +74,7 @@
 #define H_NOT_ENOUGH_RESOURCES -44
 #define H_R_STATE       -45
 #define H_RESCINDEND    -46
+#define H_MULTI_THREADS_ACTIVE -9005
 
 
 /* Long Busy is a condition that can be returned by the firmware
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
new file mode 100644
index 00000000000..1c33ec17ca3
--- /dev/null
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -0,0 +1,74 @@
+/*
+ * PowerPC BookIII S hardware breakpoint definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010, IBM Corporation.
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
+#define _PPC_BOOK3S_64_HW_BREAKPOINT_H
+
+#ifdef	__KERNEL__
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+struct arch_hw_breakpoint {
+	bool		extraneous_interrupt;
+	u8		len; /* length of the target data symbol */
+	int		type;
+	unsigned long	address;
+};
+
+#include <linux/kdebug.h>
+#include <asm/reg.h>
+#include <asm/system.h>
+
+struct perf_event;
+struct pmu;
+struct perf_sample_data;
+
+#define HW_BREAKPOINT_ALIGN 0x7
+/* Maximum permissible length of any HW Breakpoint */
+#define HW_BREAKPOINT_LEN 0x8
+
+extern int hw_breakpoint_slots(int type);
+extern int arch_bp_generic_fields(int type, int *gen_bp_type);
+extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+						unsigned long val, void *data);
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+extern struct pmu perf_ops_bp;
+extern void ptrace_triggered(struct perf_event *bp, int nmi,
+			struct perf_sample_data *data, struct pt_regs *regs);
+static inline void hw_breakpoint_disable(void)
+{
+	set_dabr(0);
+}
+extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs);
+
+#else	/* CONFIG_HAVE_HW_BREAKPOINT */
+static inline void hw_breakpoint_disable(void) { }
+static inline void thread_change_pc(struct task_struct *tsk,
+					struct pt_regs *regs) { }
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+#endif	/* __KERNEL__ */
+#endif	/* _PPC_BOOK3S_64_HW_BREAKPOINT_H */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index ecba37a9174..67ab5fb7d15 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -300,34 +300,6 @@ extern unsigned int irq_alloc_virt(struct irq_host *host,
  */
 extern void irq_free_virt(unsigned int virq, unsigned int count);
 
-
-/* -- OF helpers -- */
-
-/**
- * irq_create_of_mapping - Map a hardware interrupt into linux virq space
- * @controller: Device node of the interrupt controller
- * @inspec: Interrupt specifier from the device-tree
- * @intsize: Size of the interrupt specifier from the device-tree
- *
- * This function is identical to irq_create_mapping except that it takes
- * as input informations straight from the device-tree (typically the results
- * of the of_irq_map_*() functions.
- */
-extern unsigned int irq_create_of_mapping(struct device_node *controller,
-					  const u32 *intspec, unsigned int intsize);
-
-/**
- * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
- * @device: Device node of the device whose interrupt is to be mapped
- * @index: Index of the interrupt to map
- *
- * This function is a wrapper that chains of_irq_map_one() and
- * irq_create_of_mapping() to make things easier to callers
- */
-extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
-
-/* -- End OF helpers -- */
-
 /**
  * irq_early_init - Init irq remapping subsystem
  */
diff --git a/arch/powerpc/include/asm/local64.h b/arch/powerpc/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/powerpc/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 9f0fc9e6ce0..adc8e6cdf33 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -266,6 +266,7 @@ struct machdep_calls {
 	void (*suspend_disable_irqs)(void);
 	void (*suspend_enable_irqs)(void);
 #endif
+	int (*suspend_disable_cpu)(void);
 
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
 	ssize_t (*cpu_probe)(const char *, size_t);
@@ -277,6 +278,7 @@ extern void e500_idle(void);
 extern void power4_idle(void);
 extern void power4_cpu_offline_powersave(void);
 extern void ppc6xx_idle(void);
+extern void book3e_idle(void);
 
 /*
  * ppc_md contains a copy of the machine description structure for the
@@ -366,8 +368,5 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal)
 #define machine_late_initcall(mach,fn)		__define_machine_initcall(mach,"7",fn,7)
 #define machine_late_initcall_sync(mach,fn)	__define_machine_initcall(mach,"7s",fn,7s)
 
-void generic_suspend_disable_irqs(void);
-void generic_suspend_enable_irqs(void);
-
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
index 675e159b5ef..7ab82c825a0 100644
--- a/arch/powerpc/include/asm/macio.h
+++ b/arch/powerpc/include/asm/macio.h
@@ -38,7 +38,7 @@ struct macio_dev
 {
 	struct macio_bus	*bus;		/* macio bus this device is on */
 	struct macio_dev	*media_bay;	/* Device is part of a media bay */
-	struct of_device	ofdev;
+	struct platform_device	ofdev;
 	struct device_dma_parameters dma_parms; /* ide needs that */
 	int			n_resources;
 	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 74695816205..87a1d787c5b 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -193,6 +193,10 @@ struct mmu_psize_def
 {
 	unsigned int	shift;	/* number of bits */
 	unsigned int	enc;	/* PTE encoding */
+	unsigned int    ind;    /* Corresponding indirect page size shift */
+	unsigned int	flags;
+#define MMU_PAGE_SIZE_DIRECT	0x1	/* Supported as a direct size */
+#define MMU_PAGE_SIZE_INDIRECT	0x2	/* Supported as an indirect size */
 };
 extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 
diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h
index e6a30bb1d16..8c0ab2ca689 100644
--- a/arch/powerpc/include/asm/mpc5121.h
+++ b/arch/powerpc/include/asm/mpc5121.h
@@ -21,4 +21,36 @@ struct mpc512x_reset_module {
 	u32	rcer;	/* Reset Control Enable Register */
 };
 
+/*
+ * Clock Control Module
+ */
+struct mpc512x_ccm {
+	u32	spmr;	/* System PLL Mode Register */
+	u32	sccr1;	/* System Clock Control Register 1 */
+	u32	sccr2;	/* System Clock Control Register 2 */
+	u32	scfr1;	/* System Clock Frequency Register 1 */
+	u32	scfr2;	/* System Clock Frequency Register 2 */
+	u32	scfr2s;	/* System Clock Frequency Shadow Register 2 */
+	u32	bcr;	/* Bread Crumb Register */
+	u32	p0ccr;	/* PSC0 Clock Control Register */
+	u32	p1ccr;	/* PSC1 CCR */
+	u32	p2ccr;	/* PSC2 CCR */
+	u32	p3ccr;	/* PSC3 CCR */
+	u32	p4ccr;	/* PSC4 CCR */
+	u32	p5ccr;	/* PSC5 CCR */
+	u32	p6ccr;	/* PSC6 CCR */
+	u32	p7ccr;	/* PSC7 CCR */
+	u32	p8ccr;	/* PSC8 CCR */
+	u32	p9ccr;	/* PSC9 CCR */
+	u32	p10ccr;	/* PSC10 CCR */
+	u32	p11ccr;	/* PSC11 CCR */
+	u32	spccr;	/* SPDIF Clock Control Register */
+	u32	cccr;	/* CFM Clock Control Register */
+	u32	dccr;	/* DIU Clock Control Register */
+	u32	m1ccr;	/* MSCAN1 CCR */
+	u32	m2ccr;	/* MSCAN2 CCR */
+	u32	m3ccr;	/* MSCAN3 CCR */
+	u32	m4ccr;	/* MSCAN4 CCR */
+	u8	res[0x98]; /* Reserved */
+};
 #endif /* __ASM_POWERPC_MPC5121_H__ */
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index b664ce79a17..1f41382eda3 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -271,6 +271,7 @@ struct mpc52xx_intr {
 /* mpc52xx_common.c */
 extern void mpc5200_setup_xlb_arbiter(void);
 extern void mpc52xx_declare_of_platform_devices(void);
+extern int mpc5200_psc_ac97_gpio_reset(int psc_number);
 extern void mpc52xx_map_common_devices(void);
 extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
 extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node);
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index ecc4fc69ac1..2966df60422 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -131,6 +131,7 @@
 #define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
 #define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_ACRB			(0x8 << 24)
 #define MPC52xx_PSC_SICR_AWR			(1 << 30)
 #define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
 #define MPC52xx_PSC_SICR_I2S			(1 << 22)
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
deleted file mode 100644
index 444e97e2982..00000000000
--- a/arch/powerpc/include/asm/of_device.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASM_POWERPC_OF_DEVICE_H
-#define _ASM_POWERPC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-	struct device		dev;		/* Generic device interface */
-	struct pdev_archdata	archdata;
-};
-
-extern struct of_device *of_device_alloc(struct device_node *np,
-					 const char *bus_id,
-					 struct device *parent);
-
-extern int of_device_uevent(struct device *dev,
-			    struct kobj_uevent_env *env);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
deleted file mode 100644
index d4aaa348944..00000000000
--- a/arch/powerpc/include/asm/of_platform.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _ASM_POWERPC_OF_PLATFORM_H
-#define _ASM_POWERPC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-/* Platform devices and busses creation */
-extern struct of_device *of_platform_device_create(struct device_node *np,
-						   const char *bus_id,
-						   struct device *parent);
-/* pseudo "matches" value to not do deep probe */
-#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
-
-extern int of_platform_bus_probe(struct device_node *root,
-				 const struct of_device_id *matches,
-				 struct device *parent);
-
-extern struct of_device *of_find_device_by_phandle(phandle ph);
-
-extern void of_instantiate_rtc(void);
-
-#endif	/* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 8ce7963ad41..1ff6662f7fa 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -146,7 +146,7 @@ struct paca_struct {
 extern struct paca_struct *paca;
 extern __initdata struct paca_struct boot_paca;
 extern void initialise_paca(struct paca_struct *new_paca, int cpu);
-
+extern void setup_paca(struct paca_struct *new_paca);
 extern void allocate_pacas(void);
 extern void free_unused_pacas(void);
 
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 76e1f313a58..51e9e6f90d1 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -303,13 +303,8 @@ extern void pcibios_free_controller(struct pci_controller *phb);
 extern void pcibios_setup_phb_resources(struct pci_controller *hose);
 
 #ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
 extern int pcibios_vaddr_is_ioport(void __iomem *address);
 #else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
 static inline int pcibios_vaddr_is_ioport(void __iomem *address)
 {
 	return 0;
diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h
index f879252b7ea..2cedefddba3 100644
--- a/arch/powerpc/include/asm/percpu.h
+++ b/arch/powerpc/include/asm/percpu.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_POWERPC_PERCPU_H_
 #define _ASM_POWERPC_PERCPU_H_
 #ifdef __powerpc64__
-#include <linux/compiler.h>
 
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
@@ -12,9 +11,7 @@
 
 #include <asm/paca.h>
 
-#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
 #define __my_cpu_offset local_paca->data_offset
-#define per_cpu_offset(x) (__per_cpu_offset(x))
 
 #endif /* CONFIG_SMP */
 #endif /* __powerpc64__ */
diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h
index e6d4ce69b12..5c16b891d50 100644
--- a/arch/powerpc/include/asm/perf_event.h
+++ b/arch/powerpc/include/asm/perf_event.h
@@ -21,3 +21,15 @@
 #ifdef CONFIG_FSL_EMB_PERF_EVENT
 #include <asm/perf_event_fsl_emb.h>
 #endif
+
+#ifdef CONFIG_PERF_EVENTS
+#include <asm/ptrace.h>
+#include <asm/reg.h>
+
+#define perf_arch_fetch_caller_regs(regs, __ip)			\
+	do {							\
+		(regs)->nip = __ip;				\
+		(regs)->gpr[1] = *(unsigned long *)__get_SP();	\
+		asm volatile("mfmsr %0" : "=r" ((regs)->msr));	\
+	} while (0)
+#endif
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index d553bbeb726..43adc8b819e 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -52,13 +52,17 @@
 #define PPC_INST_WAIT			0x7c00007c
 #define PPC_INST_TLBIVAX		0x7c000624
 #define PPC_INST_TLBSRX_DOT		0x7c0006a5
+#define PPC_INST_XXLOR			0xf0000510
 
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
 #define __PPC_RB(b)	(((b) & 0x1f) << 11)
 #define __PPC_RS(s)	(((s) & 0x1f) << 21)
 #define __PPC_RT(s)	__PPC_RS(s)
+#define __PPC_XA(a)	((((a) & 0x1f) << 16) | (((a) & 0x20) >> 3))
+#define __PPC_XB(b)	((((b) & 0x1f) << 11) | (((b) & 0x20) >> 4))
 #define __PPC_XS(s)	((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5))
+#define __PPC_XT(s)	__PPC_XS(s)
 #define __PPC_T_TLB(t)	(((t) & 0x3) << 21)
 #define __PPC_WC(w)	(((w) & 0x3) << 21)
 /*
@@ -106,9 +110,12 @@
  * the 128 bit load store instructions based on that.
  */
 #define VSX_XX1(s, a, b)	(__PPC_XS(s) | __PPC_RA(a) | __PPC_RB(b))
+#define VSX_XX3(t, a, b)	(__PPC_XT(t) | __PPC_XA(a) | __PPC_XB(b))
 #define STXVD2X(s, a, b)	stringify_in_c(.long PPC_INST_STXVD2X | \
 					       VSX_XX1((s), (a), (b)))
 #define LXVD2X(s, a, b)		stringify_in_c(.long PPC_INST_LXVD2X | \
 					       VSX_XX1((s), (a), (b)))
+#define XXLOR(t, a, b)		stringify_in_c(.long PPC_INST_XXLOR | \
+					       VSX_XX3((t), (a), (b)))
 
 #endif /* _ASM_POWERPC_PPC_OPCODE_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 7492fe8ad6e..19c05b0f74b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -209,6 +209,14 @@ struct thread_struct {
 #ifdef CONFIG_PPC64
 	unsigned long	start_tb;	/* Start purr when proc switched in */
 	unsigned long	accum_tb;	/* Total accumilated purr for process */
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	struct perf_event *ptrace_bps[HBP_NUM];
+	/*
+	 * Helps identify source of single-step exception and subsequent
+	 * hw-breakpoint enablement
+	 */
+	struct perf_event *last_hit_ubp;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 	unsigned long	dabr;		/* Data address breakpoint register */
 #ifdef CONFIG_ALTIVEC
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index ddd408a93b5..ae26f2efd08 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -17,9 +17,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/types.h>
-#include <linux/of_fdt.h>
-#include <linux/proc_fs.h>
-#include <linux/platform_device.h>
 #include <asm/irq.h>
 #include <asm/atomic.h>
 
@@ -43,49 +40,14 @@ extern void pci_create_OF_bus_map(void);
  * OF address retreival & translation
  */
 
-/* Translate an OF address block into a CPU physical address
- */
-extern u64 of_translate_address(struct device_node *np, const u32 *addr);
-
 /* Translate a DMA address from device space to CPU space */
 extern u64 of_translate_dma_address(struct device_node *dev,
 				    const u32 *in_addr);
 
-/* Extract an address from a device, returns the region size and
- * the address space flags too. The PCI version uses a BAR number
- * instead of an absolute index
- */
-extern const u32 *of_get_address(struct device_node *dev, int index,
-			   u64 *size, unsigned int *flags);
 #ifdef CONFIG_PCI
-extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
-			       u64 *size, unsigned int *flags);
-#else
-static inline const u32 *of_get_pci_address(struct device_node *dev,
-		int bar_no, u64 *size, unsigned int *flags)
-{
-	return NULL;
-}
-#endif /* CONFIG_PCI */
-
-/* Get an address as a resource. Note that if your address is
- * a PIO address, the conversion will fail if the physical address
- * can't be internally converted to an IO token with
- * pci_address_to_pio(), that is because it's either called to early
- * or it can't be matched to any host bridge IO space
- */
-extern int of_address_to_resource(struct device_node *dev, int index,
-				  struct resource *r);
-#ifdef CONFIG_PCI
-extern int of_pci_address_to_resource(struct device_node *dev, int bar,
-				      struct resource *r);
-#else
-static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
-		struct resource *r)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_PCI */
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#define pci_address_to_pio pci_address_to_pio
+#endif	/* CONFIG_PCI */
 
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
@@ -104,69 +66,12 @@ struct device_node *of_find_next_cache_node(struct device_node *np);
 /* Get the MAC address */
 extern const void *of_get_mac_address(struct device_node *np);
 
-/*
- * OF interrupt mapping
- */
-
-/* This structure is returned when an interrupt is mapped. The controller
- * field needs to be put() after use
- */
-
-#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
-
-struct of_irq {
-	struct device_node *controller;	/* Interrupt controller node */
-	u32 size;			/* Specifier size */
-	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
-};
-
-/**
- * of_irq_map_init - Initialize the irq remapper
- * @flags:	flags defining workarounds to enable
- *
- * Some machines have bugs in the device-tree which require certain workarounds
- * to be applied. Call this before any interrupt mapping attempts to enable
- * those workarounds.
- */
-#define OF_IMAP_OLDWORLD_MAC	0x00000001
-#define OF_IMAP_NO_PHANDLE	0x00000002
-
-extern void of_irq_map_init(unsigned int flags);
-
-/**
- * of_irq_map_raw - Low level interrupt tree parsing
- * @parent:	the device interrupt parent
- * @intspec:	interrupt specifier ("interrupts" property of the device)
- * @ointsize:   size of the passed in interrupt specifier
- * @addr:	address specifier (start of "reg" property of the device)
- * @out_irq:	structure of_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthetized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- *
- */
-
-extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
-			  u32 ointsize, const u32 *addr,
-			  struct of_irq *out_irq);
-
-
-/**
- * of_irq_map_one - Resolve an interrupt for a device
- * @device:	the device whose interrupt is to be resolved
- * @index:     	index of the interrupt to resolve
- * @out_irq:	structure of_irq filled by this function
- *
- * This function resolves an interrupt, walking the tree, for a given
- * device-tree node. It's the high level pendant to of_irq_map_raw().
- * It also implements the workarounds for OldWolrd Macs.
- */
-extern int of_irq_map_one(struct device_node *device, int index,
-			  struct of_irq *out_irq);
+#ifdef CONFIG_NUMA
+extern int of_node_to_nid(struct device_node *device);
+#else
+static inline int of_node_to_nid(struct device_node *device) { return 0; }
+#endif
+#define of_node_to_nid of_node_to_nid
 
 /**
  * of_irq_map_pci - Resolve the interrupt for a PCI device
@@ -180,19 +85,19 @@ extern int of_irq_map_one(struct device_node *device, int index,
  * resolving using the OF tree walking.
  */
 struct pci_dev;
+struct of_irq;
 extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
 
-extern int of_irq_to_resource(struct device_node *dev, int index,
-			struct resource *r);
+extern void of_instantiate_rtc(void);
 
-/**
- * of_iomap - Maps the memory mapped IO for a given device_node
- * @device:	the device whose io range will be mapped
- * @index:	index of the io range
- *
- * Returns a pointer to the mapped memory
- */
-extern void __iomem *of_iomap(struct device_node *device, int index);
+/* These includes are put at the bottom because they may contain things
+ * that are overridden by this file.  Ideally they shouldn't be included
+ * by this file, but there are a bunch of .c files that currently depend
+ * on it.  Eventually they will be cleaned up. */
+#include <linux/of_fdt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
 
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index d62fdf4e504..d8be016d2ed 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -890,7 +890,7 @@
 #ifndef __ASSEMBLY__
 #define mfmsr()		({unsigned long rval; \
 			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
 				     : : "r" (v) : "memory")
 #define mtmsrd(v)	__mtmsrd((v), 0)
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2360317179a..667a498eaee 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -29,8 +29,8 @@
 #if defined(CONFIG_PPC_BOOK3E_64)
 #define MSR_		MSR_ME | MSR_CE
 #define MSR_KERNEL      MSR_ | MSR_CM
-#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
-#define MSR_USER64	MSR_USER32 | MSR_CM
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE | MSR_DE
+#define MSR_USER64	MSR_USER32 | MSR_CM | MSR_DE
 #elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
@@ -62,6 +62,7 @@
 #define SPRN_TLB0PS	0x158	/* TLB 0 Page Size Register */
 #define SPRN_MAS5_MAS6	0x15c	/* MMU Assist Register 5 || 6 */
 #define SPRN_MAS8_MAS1	0x15d	/* MMU Assist Register 8 || 1 */
+#define SPRN_EPTCFG	0x15e	/* Embedded Page Table Config */
 #define SPRN_MAS7_MAS3	0x174	/* MMU Assist Register 7 || 3 */
 #define SPRN_MAS0_MAS1	0x175	/* MMU Assist Register 0 || 1 */
 #define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 20de73c3668..3d35f8ae377 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -63,6 +63,14 @@ struct rtas_t {
 	struct device_node *dev;	/* virtual address pointer */
 };
 
+struct rtas_suspend_me_data {
+	atomic_t working; /* number of cpus accessing this struct */
+	atomic_t done;
+	int token; /* ibm,suspend-me */
+	atomic_t error;
+	struct completion *complete; /* wait on this until working == 0 */
+};
+
 /* RTAS event classes */
 #define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
 #define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
@@ -137,6 +145,9 @@ struct rtas_t {
 #define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
 #define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
 
+/* RTAS check-exception vector offset */
+#define RTAS_VECTOR_EXTERNAL_INTERRUPT	0x500
+
 struct rtas_error_log {
 	unsigned long version:8;		/* Architectural version */
 	unsigned long severity:3;		/* Severity level of error */
@@ -174,6 +185,8 @@ extern int rtas_set_indicator(int indicator, int index, int new_value);
 extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
 extern void rtas_progress(char *s, unsigned short hex);
 extern void rtas_initialize(void);
+extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data);
+extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data);
 
 struct rtc_time;
 extern unsigned long rtas_get_boot_time(void);
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
index 7ae2753da56..e3bdada8c54 100644
--- a/arch/powerpc/include/asm/smu.h
+++ b/arch/powerpc/include/asm/smu.h
@@ -457,8 +457,8 @@ extern void smu_poll(void);
  */
 extern int smu_init(void);
 extern int smu_present(void);
-struct of_device;
-extern struct of_device *smu_get_ofdev(void);
+struct platform_device;
+extern struct platform_device *smu_get_ofdev(void);
 
 
 /*
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 27ccb764fda..dc779dfcf25 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -28,16 +28,12 @@
 extern unsigned long tb_ticks_per_jiffy;
 extern unsigned long tb_ticks_per_usec;
 extern unsigned long tb_ticks_per_sec;
-extern u64 tb_to_xs;
-extern unsigned      tb_to_us;
 
 struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
 extern void GregorianDay(struct rtc_time *tm);
-extern time_t last_rtc_update;
 
 extern void generic_calibrate_decr(void);
-extern void wakeup_decrementer(void);
 extern void snapshot_timebase(void);
 
 extern void set_dec_cpu6(unsigned int val);
@@ -204,9 +200,6 @@ static inline unsigned long tb_ticks_since(unsigned long tstamp)
 extern u64 mulhdu(u64, u64);
 #endif
 
-extern void smp_space_timers(unsigned int);
-
-extern unsigned mulhwu_scale_factor(unsigned, unsigned);
 extern void div128_by_32(u64 dividend_high, u64 dividend_low,
 			 unsigned divisor, struct div_result *dr);
 
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index 32adf728072..afe4aaa65c3 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -41,8 +41,6 @@ static inline int cpu_to_node(int cpu)
 			       cpu_all_mask :				\
 			       node_to_cpumask_map[node])
 
-int of_node_to_nid(struct device_node *device);
-
 struct pci_bus;
 #ifdef CONFIG_PCI
 extern int pcibus_to_node(struct pci_bus *bus);
@@ -87,6 +85,9 @@ static inline int pcibus_to_node(struct pci_bus *bus)
 	.balance_interval	= 1,					\
 }
 
+extern int __node_distance(int, int);
+#define node_distance(a, b) __node_distance(a, b)
+
 extern void __init dump_numa_cpu_topology(void);
 
 extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
@@ -94,11 +95,6 @@ extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
 
 #else
 
-static inline int of_node_to_nid(struct device_node *device)
-{
-	return 0;
-}
-
 static inline void dump_numa_cpu_topology(void) {}
 
 static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index 13c2c283e17..08679c5319b 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -85,6 +85,7 @@ struct vdso_data {
 	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
 	__s32 wtom_clock_nsec;
 	struct timespec stamp_xtime;	/* xtime as at tb_orig_stamp */
+	__u32 stamp_sec_fraction;	/* fractional seconds of stamp_xtime */
    	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
    	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
 };
@@ -105,6 +106,7 @@ struct vdso_data {
 	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
 	__s32 wtom_clock_nsec;
 	struct timespec stamp_xtime;	/* xtime as at tb_orig_stamp */
+	__u32 stamp_sec_fraction;	/* fractional seconds of stamp_xtime */
    	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
 	__u32 dcache_block_size;	/* L1 d-cache block size     */
 	__u32 icache_block_size;	/* L1 i-cache block size     */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 58d0572de6f..1dda7012914 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -34,13 +34,14 @@ obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o nvram_64.o firmware.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
-obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o
+obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
-obj-$(CONFIG_PPC_OF)		+= of_device.o of_platform.o prom_parse.o
+obj-$(CONFIG_PPC_OF)		+= of_platform.o prom_parse.o
 obj-$(CONFIG_PPC_CLOCK)		+= clock.o
 procfs-y			:= proc_powerpc.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
@@ -67,6 +68,7 @@ obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 obj-$(CONFIG_FSL_BOOKE)		+= cpu_setup_fsl_booke.o dbell.o
+obj-$(CONFIG_PPC_BOOK3E_64)	+= dbell.o
 
 extra-y				:= head_$(CONFIG_WORD_SIZE).o
 extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 496cc5b3984..1c0607ddccc 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -194,7 +194,6 @@ int main(void)
 	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
 	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
-	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 	DEFINE(PACA_KVM_SVCPU, offsetof(struct paca_struct, shadow_vcpu));
@@ -342,6 +341,7 @@ int main(void)
 	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
 	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
 	DEFINE(STAMP_XTIME, offsetof(struct vdso_data, stamp_xtime));
+	DEFINE(STAMP_SEC_FRAC, offsetof(struct vdso_data, stamp_sec_fraction));
 	DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size));
 	DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size));
 	DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size));
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 87aa0f3c604..65e2b4e10f9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1364,10 +1364,10 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
-	{	/* 405EX */
-		.pvr_mask		= 0xffff0004,
-		.pvr_value		= 0x12910004,
-		.cpu_name		= "405EX",
+	{	/* 405EX Rev. A/B with Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910007,
+		.cpu_name		= "405EX Rev. A/B",
 		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
@@ -1377,10 +1377,114 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
-	{	/* 405EXr */
-		.pvr_mask		= 0xffff0004,
+	{	/* 405EX Rev. C without Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x1291000d,
+		.cpu_name		= "405EX Rev. C",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EX Rev. C with Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x1291000f,
+		.cpu_name		= "405EX Rev. C",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EX Rev. D without Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910003,
+		.cpu_name		= "405EX Rev. D",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EX Rev. D with Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910005,
+		.cpu_name		= "405EX Rev. D",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EXr Rev. A/B without Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910001,
+		.cpu_name		= "405EXr Rev. A/B",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EXr Rev. C without Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910009,
+		.cpu_name		= "405EXr Rev. C",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EXr Rev. C with Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x1291000b,
+		.cpu_name		= "405EXr Rev. C",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EXr Rev. D without Security */
+		.pvr_mask		= 0xffff000f,
 		.pvr_value		= 0x12910000,
-		.cpu_name		= "405EXr",
+		.cpu_name		= "405EXr Rev. D",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.mmu_features		= MMU_FTR_TYPE_40x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	},
+	{	/* 405EXr Rev. D with Security */
+		.pvr_mask		= 0xffff000f,
+		.pvr_value		= 0x12910002,
+		.cpu_name		= "405EXr Rev. D",
 		.cpu_features		= CPU_FTRS_40X,
 		.cpu_user_features	= PPC_FEATURE_32 |
 			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 40f524643ba..8e05c16344e 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -128,9 +128,9 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
 	if (!csize)
 		return 0;
 
-	csize = min(csize, PAGE_SIZE);
+	csize = min_t(size_t, csize, PAGE_SIZE);
 
-	if (pfn < max_pfn) {
+	if ((min_low_pfn < pfn) && (pfn < max_pfn)) {
 		vaddr = __va(pfn << PAGE_SHIFT);
 		csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
 	} else {
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index 1493734cd87..3307a52d797 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -13,32 +13,88 @@
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/threads.h>
+#include <linux/percpu.h>
 
 #include <asm/dbell.h>
+#include <asm/irq_regs.h>
 
 #ifdef CONFIG_SMP
-unsigned long dbell_smp_message[NR_CPUS];
+struct doorbell_cpu_info {
+	unsigned long	messages;	/* current messages bits */
+	unsigned int	tag;		/* tag value */
+};
 
-void smp_dbell_message_pass(int target, int msg)
+static DEFINE_PER_CPU(struct doorbell_cpu_info, doorbell_cpu_info);
+
+void doorbell_setup_this_cpu(void)
+{
+	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+
+	info->messages = 0;
+	info->tag = mfspr(SPRN_PIR) & 0x3fff;
+}
+
+void doorbell_message_pass(int target, int msg)
 {
+	struct doorbell_cpu_info *info;
 	int i;
 
-	if(target < NR_CPUS) {
-		set_bit(msg, &dbell_smp_message[target]);
-		ppc_msgsnd(PPC_DBELL, 0, target);
+	if (target < NR_CPUS) {
+		info = &per_cpu(doorbell_cpu_info, target);
+		set_bit(msg, &info->messages);
+		ppc_msgsnd(PPC_DBELL, 0, info->tag);
 	}
-	else if(target == MSG_ALL_BUT_SELF) {
+	else if (target == MSG_ALL_BUT_SELF) {
 		for_each_online_cpu(i) {
 			if (i == smp_processor_id())
 				continue;
-			set_bit(msg, &dbell_smp_message[i]);
-			ppc_msgsnd(PPC_DBELL, 0, i);
+			info = &per_cpu(doorbell_cpu_info, i);
+			set_bit(msg, &info->messages);
+			ppc_msgsnd(PPC_DBELL, 0, info->tag);
 		}
 	}
 	else { /* target == MSG_ALL */
-		for_each_online_cpu(i)
-			set_bit(msg, &dbell_smp_message[i]);
+		for_each_online_cpu(i) {
+			info = &per_cpu(doorbell_cpu_info, i);
+			set_bit(msg, &info->messages);
+		}
 		ppc_msgsnd(PPC_DBELL, PPC_DBELL_MSG_BRDCAST, 0);
 	}
 }
-#endif
+
+void doorbell_exception(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+	int msg;
+
+	/* Warning: regs can be NULL when called from irq enable */
+
+	if (!info->messages || (num_online_cpus() < 2))
+		goto out;
+
+	for (msg = 0; msg < 4; msg++)
+		if (test_and_clear_bit(msg, &info->messages))
+			smp_message_recv(msg);
+
+out:
+	set_irq_regs(old_regs);
+}
+
+void doorbell_check_self(void)
+{
+	struct doorbell_cpu_info *info = &__get_cpu_var(doorbell_cpu_info);
+
+	if (!info->messages)
+		return;
+
+	ppc_msgsnd(PPC_DBELL, 0, info->tag);
+}
+
+#else /* CONFIG_SMP */
+void doorbell_exception(struct pt_regs *regs)
+{
+	printk(KERN_WARNING "Received doorbell on non-smp system\n");
+}
+#endif /* CONFIG_SMP */
+
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 02f724f3675..4295e0b94b2 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -82,17 +82,9 @@ static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
 	.priority = 0,
 };
 
-static struct notifier_block ppc_swiotlb_of_bus_notifier = {
-	.notifier_call = ppc_swiotlb_bus_notify,
-	.priority = 0,
-};
-
 int __init swiotlb_setup_bus_notifier(void)
 {
 	bus_register_notifier(&platform_bus_type,
 			      &ppc_swiotlb_plat_bus_notifier);
-	bus_register_notifier(&of_platform_bus_type,
-			      &ppc_swiotlb_of_bus_notifier);
-
 	return 0;
 }
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 24dcc0ecf24..5c43063d250 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -191,6 +191,12 @@ exc_##n##_bad_stack:							    \
 	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
 	b	bad_stack_book3e;	/* bad stack error */
 
+/* WARNING: If you change the layout of this stub, make sure you chcek
+	*   the debug exception handler which handles single stepping
+	*   into exceptions from userspace, and the MM code in
+	*   arch/powerpc/mm/tlb_nohash.c which patches the branch here
+	*   and would need to be updated if that branch is moved
+	*/
 #define	EXCEPTION_STUB(loc, label)					\
 	. = interrupt_base_book3e + loc;				\
 	nop;	/* To make debug interrupts happy */			\
@@ -204,11 +210,30 @@ exc_##n##_bad_stack:							    \
 	lis	r,TSR_FIS@h;						\
 	mtspr	SPRN_TSR,r
 
+/* Used by asynchronous interrupt that may happen in the idle loop.
+ *
+ * This check if the thread was in the idle loop, and if yes, returns
+ * to the caller rather than the PC. This is to avoid a race if
+ * interrupts happen before the wait instruction.
+ */
+#define CHECK_NAPPING()							\
+	clrrdi	r11,r1,THREAD_SHIFT;					\
+	ld	r10,TI_LOCAL_FLAGS(r11);				\
+	andi.	r9,r10,_TLF_NAPPING;					\
+	beq+	1f;							\
+	ld	r8,_LINK(r1);						\
+	rlwinm	r7,r10,0,~_TLF_NAPPING;					\
+	std	r8,_NIP(r1);						\
+	std	r7,TI_LOCAL_FLAGS(r11);					\
+1:
+
+
 #define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack)			\
 	START_EXCEPTION(label);						\
 	NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE)	\
 	EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL)		\
 	ack(r8);							\
+	CHECK_NAPPING();						\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
 	bl	hdlr;							\
 	b	.ret_from_except_lite;
@@ -246,11 +271,9 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
 	EXCEPTION_STUB(0x1c0, data_tlb_miss)
 	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+	EXCEPTION_STUB(0x280, doorbell)
+	EXCEPTION_STUB(0x2a0, doorbell_crit)
 
-#if 0
-	EXCEPTION_STUB(0x280, processor_doorbell)
-	EXCEPTION_STUB(0x220, processor_doorbell_crit)
-#endif
 	.globl interrupt_end_book3e
 interrupt_end_book3e:
 
@@ -259,6 +282,7 @@ interrupt_end_book3e:
 	CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
 //	bl	special_reg_save_crit
+//	CHECK_NAPPING();
 //	addi	r3,r1,STACK_FRAME_OVERHEAD
 //	bl	.critical_exception
 //	b	ret_from_crit_except
@@ -270,6 +294,7 @@ interrupt_end_book3e:
 //	EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
 //	bl	special_reg_save_mc
 //	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	CHECK_NAPPING();
 //	bl	.machine_check_exception
 //	b	ret_from_mc_except
 	b	.
@@ -340,6 +365,7 @@ interrupt_end_book3e:
 	CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
 //	EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
 //	bl	special_reg_save_crit
+//	CHECK_NAPPING();
 //	addi	r3,r1,STACK_FRAME_OVERHEAD
 //	bl	.unknown_exception
 //	b	ret_from_crit_except
@@ -428,6 +454,20 @@ interrupt_end_book3e:
 kernel_dbg_exc:
 	b	.	/* NYI */
 
+/* Doorbell interrupt */
+	MASKABLE_EXCEPTION(0x2070, doorbell, .doorbell_exception, ACK_NONE)
+
+/* Doorbell critical Interrupt */
+	START_EXCEPTION(doorbell_crit);
+	CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL)
+//	bl	special_reg_save_crit
+//	CHECK_NAPPING();
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.doorbell_critical_exception
+//	b	ret_from_crit_except
+	b	.
+
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -563,6 +603,8 @@ BAD_STACK_TRAMPOLINE(0xd00)
 BAD_STACK_TRAMPOLINE(0xe00)
 BAD_STACK_TRAMPOLINE(0xf00)
 BAD_STACK_TRAMPOLINE(0xf20)
+BAD_STACK_TRAMPOLINE(0x2070)
+BAD_STACK_TRAMPOLINE(0x2080)
 
 	.globl	bad_stack_book3e
 bad_stack_book3e:
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 3e423fbad6b..f53029a0155 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -828,6 +828,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 /* We have a data breakpoint exception - handle it */
 handle_dabr_fault:
+	bl	.save_nvgprs
 	ld      r4,_DAR(r1)
 	ld      r5,_DSISR(r1)
 	addi    r3,r1,STACK_FRAME_OVERHEAD
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
new file mode 100644
index 00000000000..5ecd0401cdb
--- /dev/null
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -0,0 +1,364 @@
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers. Derived from
+ * "arch/x86/kernel/hw_breakpoint.c"
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright 2010 IBM Corporation
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ *
+ */
+
+#include <linux/hw_breakpoint.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/percpu.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+#include <asm/sstep.h>
+#include <asm/uaccess.h>
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for every cpu
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg);
+
+/*
+ * Returns total number of data or instruction breakpoints available.
+ */
+int hw_breakpoint_slots(int type)
+{
+	if (type == TYPE_DATA)
+		return HBP_NUM;
+	return 0;		/* no instruction breakpoints available */
+}
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+	*slot = bp;
+
+	/*
+	 * Do not install DABR values if the instruction must be single-stepped.
+	 * If so, DABR will be populated in single_step_dabr_instruction().
+	 */
+	if (current->thread.last_hit_ubp != bp)
+		set_dabr(info->address | info->type | DABR_TRANSLATION);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct perf_event **slot = &__get_cpu_var(bp_per_reg);
+
+	if (*slot != bp) {
+		WARN_ONCE(1, "Can't find the breakpoint");
+		return;
+	}
+
+	*slot = NULL;
+	set_dabr(0);
+}
+
+/*
+ * Perform cleanup of arch-specific counters during unregistration
+ * of the perf-event
+ */
+void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+	/*
+	 * If the breakpoint is unregistered between a hw_breakpoint_handler()
+	 * and the single_step_dabr_instruction(), then cleanup the breakpoint
+	 * restoration variables to prevent dangling pointers.
+	 */
+	if (bp->ctx->task)
+		bp->ctx->task->thread.last_hit_ubp = NULL;
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	return is_kernel_addr(info->address);
+}
+
+int arch_bp_generic_fields(int type, int *gen_bp_type)
+{
+	switch (type) {
+	case DABR_DATA_READ:
+		*gen_bp_type = HW_BREAKPOINT_R;
+		break;
+	case DABR_DATA_WRITE:
+		*gen_bp_type = HW_BREAKPOINT_W;
+		break;
+	case (DABR_DATA_WRITE | DABR_DATA_READ):
+		*gen_bp_type = (HW_BREAKPOINT_W | HW_BREAKPOINT_R);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	int ret = -EINVAL;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	if (!bp)
+		return ret;
+
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_R:
+		info->type = DABR_DATA_READ;
+		break;
+	case HW_BREAKPOINT_W:
+		info->type = DABR_DATA_WRITE;
+		break;
+	case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+		info->type = (DABR_DATA_READ | DABR_DATA_WRITE);
+		break;
+	default:
+		return ret;
+	}
+
+	info->address = bp->attr.bp_addr;
+	info->len = bp->attr.bp_len;
+
+	/*
+	 * Since breakpoint length can be a maximum of HW_BREAKPOINT_LEN(8)
+	 * and breakpoint addresses are aligned to nearest double-word
+	 * HW_BREAKPOINT_ALIGN by rounding off to the lower address, the
+	 * 'symbolsize' should satisfy the check below.
+	 */
+	if (info->len >
+	    (HW_BREAKPOINT_LEN - (info->address & HW_BREAKPOINT_ALIGN)))
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * Restores the breakpoint on the debug registers.
+ * Invoke this function if it is known that the execution context is
+ * about to change to cause loss of MSR_SE settings.
+ */
+void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs)
+{
+	struct arch_hw_breakpoint *info;
+
+	if (likely(!tsk->thread.last_hit_ubp))
+		return;
+
+	info = counter_arch_bp(tsk->thread.last_hit_ubp);
+	regs->msr &= ~MSR_SE;
+	set_dabr(info->address | info->type | DABR_TRANSLATION);
+	tsk->thread.last_hit_ubp = NULL;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	int rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	struct pt_regs *regs = args->regs;
+	int stepped = 1;
+	struct arch_hw_breakpoint *info;
+	unsigned int instr;
+	unsigned long dar = regs->dar;
+
+	/* Disable breakpoints during exception handling */
+	set_dabr(0);
+
+	/*
+	 * The counter may be concurrently released but that can only
+	 * occur from a call_rcu() path. We can then safely fetch
+	 * the breakpoint, use its callback, touch its counter
+	 * while we are in an rcu_read_lock() path.
+	 */
+	rcu_read_lock();
+
+	bp = __get_cpu_var(bp_per_reg);
+	if (!bp)
+		goto out;
+	info = counter_arch_bp(bp);
+
+	/*
+	 * Return early after invoking user-callback function without restoring
+	 * DABR if the breakpoint is from ptrace which always operates in
+	 * one-shot mode. The ptrace-ed process will receive the SIGTRAP signal
+	 * generated in do_dabr().
+	 */
+	if (bp->overflow_handler == ptrace_triggered) {
+		perf_bp_event(bp, regs);
+		rc = NOTIFY_DONE;
+		goto out;
+	}
+
+	/*
+	 * Verify if dar lies within the address range occupied by the symbol
+	 * being watched to filter extraneous exceptions.  If it doesn't,
+	 * we still need to single-step the instruction, but we don't
+	 * generate an event.
+	 */
+	info->extraneous_interrupt = !((bp->attr.bp_addr <= dar) &&
+			(dar - bp->attr.bp_addr < bp->attr.bp_len));
+
+	/* Do not emulate user-space instructions, instead single-step them */
+	if (user_mode(regs)) {
+		bp->ctx->task->thread.last_hit_ubp = bp;
+		regs->msr |= MSR_SE;
+		goto out;
+	}
+
+	stepped = 0;
+	instr = 0;
+	if (!__get_user_inatomic(instr, (unsigned int *) regs->nip))
+		stepped = emulate_step(regs, instr);
+
+	/*
+	 * emulate_step() could not execute it. We've failed in reliably
+	 * handling the hw-breakpoint. Unregister it and throw a warning
+	 * message to let the user know about it.
+	 */
+	if (!stepped) {
+		WARN(1, "Unable to handle hardware breakpoint. Breakpoint at "
+			"0x%lx will be disabled.", info->address);
+		perf_event_disable(bp);
+		goto out;
+	}
+	/*
+	 * As a policy, the callback is invoked in a 'trigger-after-execute'
+	 * fashion
+	 */
+	if (!info->extraneous_interrupt)
+		perf_bp_event(bp, regs);
+
+	set_dabr(info->address | info->type | DABR_TRANSLATION);
+out:
+	rcu_read_unlock();
+	return rc;
+}
+
+/*
+ * Handle single-step exceptions following a DABR hit.
+ */
+int __kprobes single_step_dabr_instruction(struct die_args *args)
+{
+	struct pt_regs *regs = args->regs;
+	struct perf_event *bp = NULL;
+	struct arch_hw_breakpoint *bp_info;
+
+	bp = current->thread.last_hit_ubp;
+	/*
+	 * Check if we are single-stepping as a result of a
+	 * previous HW Breakpoint exception
+	 */
+	if (!bp)
+		return NOTIFY_DONE;
+
+	bp_info = counter_arch_bp(bp);
+
+	/*
+	 * We shall invoke the user-defined callback function in the single
+	 * stepping handler to confirm to 'trigger-after-execute' semantics
+	 */
+	if (!bp_info->extraneous_interrupt)
+		perf_bp_event(bp, regs);
+
+	set_dabr(bp_info->address | bp_info->type | DABR_TRANSLATION);
+	current->thread.last_hit_ubp = NULL;
+
+	/*
+	 * If the process was being single-stepped by ptrace, let the
+	 * other single-step actions occur (e.g. generate SIGTRAP).
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		return NOTIFY_DONE;
+
+	return NOTIFY_STOP;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(
+		struct notifier_block *unused, unsigned long val, void *data)
+{
+	int ret = NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_DABR_MATCH:
+		ret = hw_breakpoint_handler(data);
+		break;
+	case DIE_SSTEP:
+		ret = single_step_dabr_instruction(data);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	struct thread_struct *t = &tsk->thread;
+
+	unregister_hw_breakpoint(t->ptrace_bps[0]);
+	t->ptrace_bps[0] = NULL;
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 21266abfbda..9b626cfffce 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -140,19 +140,19 @@ static struct dma_map_ops ibmebus_dma_ops = {
 
 static int ibmebus_match_path(struct device *dev, void *data)
 {
-	struct device_node *dn = to_of_device(dev)->dev.of_node;
+	struct device_node *dn = to_platform_device(dev)->dev.of_node;
 	return (dn->full_name &&
 		(strcasecmp((char *)data, dn->full_name) == 0));
 }
 
 static int ibmebus_match_node(struct device *dev, void *data)
 {
-	return to_of_device(dev)->dev.of_node == data;
+	return to_platform_device(dev)->dev.of_node == data;
 }
 
 static int ibmebus_create_device(struct device_node *dn)
 {
-	struct of_device *dev;
+	struct platform_device *dev;
 	int ret;
 
 	dev = of_device_alloc(dn, NULL, &ibmebus_bus_device);
@@ -298,7 +298,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus,
 
 	if ((dev = bus_find_device(&ibmebus_bus_type, NULL, path,
 				   ibmebus_match_path))) {
-		of_device_unregister(to_of_device(dev));
+		of_device_unregister(to_platform_device(dev));
 
 		kfree(path);
 		return count;
diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S
new file mode 100644
index 00000000000..16c002d6bdf
--- /dev/null
+++ b/arch/powerpc/kernel/idle_book3e.S
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2010 IBM Corp, Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Generic idle routine for Book3E processors
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/ppc-opcode.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+
+/* 64-bit version only for now */
+#ifdef CONFIG_PPC64
+
+_GLOBAL(book3e_idle)
+	/* Save LR for later */
+	mflr	r0
+	std	r0,16(r1)
+
+	/* Hard disable interrupts */
+	wrteei	0
+
+	/* Now check if an interrupt came in while we were soft disabled
+	 * since we may otherwise lose it (doorbells etc...). We know
+	 * that since PACAHARDIRQEN will have been cleared in that case.
+	 */
+	lbz	r3,PACAHARDIRQEN(r13)
+	cmpwi	cr0,r3,0
+	beqlr
+
+	/* Now we are going to mark ourselves as soft and hard enables in
+	 * order to be able to take interrupts while asleep. We inform lockdep
+	 * of that. We don't actually turn interrupts on just yet tho.
+	 */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	stdu    r1,-128(r1)
+	bl	.trace_hardirqs_on
+#endif
+	li	r0,1
+	stb	r0,PACASOFTIRQEN(r13)
+	stb	r0,PACAHARDIRQEN(r13)
+	
+	/* Interrupts will make use return to LR, so get something we want
+	 * in there
+	 */
+	bl	1f
+
+	/* Hard disable interrupts again */
+	wrteei	0
+
+	/* Mark them off again in the PACA as well */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)
+	stb	r0,PACAHARDIRQEN(r13)
+
+	/* Tell lockdep about it */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	.trace_hardirqs_off
+	addi    r1,r1,128
+#endif
+	ld	r0,16(r1)
+	mtlr	r0
+	blr
+
+1:	/* Let's set the _TLF_NAPPING flag so interrupts make us return
+	 * to the right spot
+	*/
+	clrrdi	r11,r1,THREAD_SHIFT
+	ld	r10,TI_LOCAL_FLAGS(r11)
+	ori	r10,r10,_TLF_NAPPING
+	std	r10,TI_LOCAL_FLAGS(r11)
+
+	/* We can now re-enable hard interrupts and go to sleep */
+	wrteei	1
+1:	PPC_WAIT(0)
+	b	1b
+
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 77be3d058a6..d3ce67cf03b 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -53,6 +53,8 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -64,6 +66,8 @@
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
 #include <asm/udbg.h>
+#include <asm/dbell.h>
+
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #include <asm/firmware.h>
@@ -153,14 +157,28 @@ notrace void raw_local_irq_restore(unsigned long en)
 	if (get_hard_enabled())
 		return;
 
+#if defined(CONFIG_BOOKE) && defined(CONFIG_SMP)
+	/* Check for pending doorbell interrupts and resend to ourself */
+	doorbell_check_self();
+#endif
+
 	/*
 	 * Need to hard-enable interrupts here.  Since currently disabled,
 	 * no need to take further asm precautions against preemption; but
 	 * use local_paca instead of get_paca() to avoid preemption checking.
 	 */
 	local_paca->hard_enabled = en;
+
+#ifndef CONFIG_BOOKE
+	/* On server, re-trigger the decrementer if it went negative since
+	 * some processors only trigger on edge transitions of the sign bit.
+	 *
+	 * BookE has a level sensitive decrementer (latches in TSR) so we
+	 * don't need that
+	 */
 	if ((int)mfspr(SPRN_DEC) < 0)
 		mtspr(SPRN_DEC, 1);
+#endif /* CONFIG_BOOKE */
 
 	/*
 	 * Force the delivery of pending soft-disabled interrupts on PS3.
@@ -804,18 +822,6 @@ unsigned int irq_create_of_mapping(struct device_node *controller,
 }
 EXPORT_SYMBOL_GPL(irq_create_of_mapping);
 
-unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
-{
-	struct of_irq oirq;
-
-	if (of_irq_map_one(dev, index, &oirq))
-		return NO_IRQ;
-
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-}
-EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
-
 void irq_dispose_mapping(unsigned int virq)
 {
 	struct irq_host *host;
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 82a7b228c81..7f61a3ac787 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -129,7 +129,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 		return 0;
 
 	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
-		regs->nip += 4;
+		regs->nip += BREAK_INSTR_SIZE;
 
 	return 1;
 }
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 035ada5443e..c1fd0f9658f 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -4,6 +4,7 @@
 #include <linux/serial_core.h>
 #include <linux/console.h>
 #include <linux/pci.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 89f005116aa..dd6c141f166 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -45,6 +45,18 @@ void machine_kexec_cleanup(struct kimage *image)
 		ppc_md.machine_kexec_cleanup(image);
 }
 
+void arch_crash_save_vmcoreinfo(void)
+{
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+	VMCOREINFO_SYMBOL(contig_page_data);
+#endif
+}
+
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
@@ -144,24 +156,24 @@ int overlaps_crashkernel(unsigned long start, unsigned long size)
 }
 
 /* Values we need to export to the second kernel via the device tree. */
-static unsigned long kernel_end;
-static unsigned long crashk_size;
+static phys_addr_t kernel_end;
+static phys_addr_t crashk_size;
 
 static struct property kernel_end_prop = {
 	.name = "linux,kernel-end",
-	.length = sizeof(unsigned long),
+	.length = sizeof(phys_addr_t),
 	.value = &kernel_end,
 };
 
 static struct property crashk_base_prop = {
 	.name = "linux,crashkernel-base",
-	.length = sizeof(unsigned long),
+	.length = sizeof(phys_addr_t),
 	.value = &crashk_res.start,
 };
 
 static struct property crashk_size_prop = {
 	.name = "linux,crashkernel-size",
-	.length = sizeof(unsigned long),
+	.length = sizeof(phys_addr_t),
 	.value = &crashk_size,
 };
 
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index ed31a29c4ff..583af70c4b1 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -15,6 +15,8 @@
 #include <linux/thread_info.h>
 #include <linux/init_task.h>
 #include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/cpu.h>
 
 #include <asm/page.h>
 #include <asm/current.h>
@@ -25,6 +27,7 @@
 #include <asm/sections.h>	/* _end */
 #include <asm/prom.h>
 #include <asm/smp.h>
+#include <asm/hw_breakpoint.h>
 
 int default_machine_kexec_prepare(struct kimage *image)
 {
@@ -165,6 +168,7 @@ static void kexec_smp_down(void *arg)
 	while(kexec_all_irq_disabled == 0)
 		cpu_relax();
 	mb(); /* make sure all irqs are disabled before this */
+	hw_breakpoint_disable();
 	/*
 	 * Now every CPU has IRQs off, we can clear out any pending
 	 * IPIs and be sure that no more will come in after this.
@@ -180,8 +184,22 @@ static void kexec_prepare_cpus_wait(int wait_state)
 {
 	int my_cpu, i, notified=-1;
 
+	hw_breakpoint_disable();
 	my_cpu = get_cpu();
-	/* Make sure each CPU has atleast made it to the state we need */
+	/* Make sure each CPU has at least made it to the state we need.
+	 *
+	 * FIXME: There is a (slim) chance of a problem if not all of the CPUs
+	 * are correctly onlined.  If somehow we start a CPU on boot with RTAS
+	 * start-cpu, but somehow that CPU doesn't write callin_cpu_map[] in
+	 * time, the boot CPU will timeout.  If it does eventually execute
+	 * stuff, the secondary will start up (paca[].cpu_start was written) and
+	 * get into a peculiar state.  If the platform supports
+	 * smp_ops->take_timebase(), the secondary CPU will probably be spinning
+	 * in there.  If not (i.e. pseries), the secondary will continue on and
+	 * try to online itself/idle/etc. If it survives that, we need to find
+	 * these possible-but-not-online-but-should-be CPUs and chaperone them
+	 * into kexec_smp_wait().
+	 */
 	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
@@ -189,9 +207,9 @@ static void kexec_prepare_cpus_wait(int wait_state)
 		while (paca[i].kexec_state < wait_state) {
 			barrier();
 			if (i != notified) {
-				printk( "kexec: waiting for cpu %d (physical"
-						" %d) to enter %i state\n",
-					i, paca[i].hw_cpu_id, wait_state);
+				printk(KERN_INFO "kexec: waiting for cpu %d "
+				       "(physical %d) to enter %i state\n",
+				       i, paca[i].hw_cpu_id, wait_state);
 				notified = i;
 			}
 		}
@@ -199,9 +217,32 @@ static void kexec_prepare_cpus_wait(int wait_state)
 	mb();
 }
 
-static void kexec_prepare_cpus(void)
+/*
+ * We need to make sure each present CPU is online.  The next kernel will scan
+ * the device tree and assume primary threads are online and query secondary
+ * threads via RTAS to online them if required.  If we don't online primary
+ * threads, they will be stuck.  However, we also online secondary threads as we
+ * may be using 'cede offline'.  In this case RTAS doesn't see the secondary
+ * threads as offline -- and again, these CPUs will be stuck.
+ *
+ * So, we online all CPUs that should be running, including secondary threads.
+ */
+static void wake_offline_cpus(void)
 {
+	int cpu = 0;
 
+	for_each_present_cpu(cpu) {
+		if (!cpu_online(cpu)) {
+			printk(KERN_INFO "kexec: Waking offline cpu %d.\n",
+			       cpu);
+			cpu_up(cpu);
+		}
+	}
+}
+
+static void kexec_prepare_cpus(void)
+{
+	wake_offline_cpus();
 	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	local_irq_disable();
 	mb(); /* make sure IRQs are disabled before we say they are */
@@ -215,7 +256,10 @@ static void kexec_prepare_cpus(void)
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 0);
 
-	/* Before removing MMU mapings make sure all CPUs have entered real mode */
+	/*
+	 * Before removing MMU mappings make sure all CPUs have entered real
+	 * mode:
+	 */
 	kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE);
 
 	put_cpu();
@@ -257,6 +301,12 @@ static void kexec_prepare_cpus(void)
 static union thread_union kexec_stack __init_task_data =
 	{ };
 
+/*
+ * For similar reasons to the stack above, the kexecing CPU needs to be on a
+ * static PACA; we switch to kexec_paca.
+ */
+struct paca_struct kexec_paca;
+
 /* Our assembly helper, in kexec_stub.S */
 extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
 					void *image, void *control,
@@ -278,12 +328,28 @@ void default_machine_kexec(struct kimage *image)
 	if (crashing_cpu == -1)
 		kexec_prepare_cpus();
 
+	pr_debug("kexec: Starting switchover sequence.\n");
+
 	/* switch to a staticly allocated stack.  Based on irq stack code.
 	 * XXX: the task struct will likely be invalid once we do the copy!
 	 */
 	kexec_stack.thread_info.task = current_thread_info()->task;
 	kexec_stack.thread_info.flags = 0;
 
+	/* We need a static PACA, too; copy this CPU's PACA over and switch to
+	 * it.  Also poison per_cpu_offset to catch anyone using non-static
+	 * data.
+	 */
+	memcpy(&kexec_paca, get_paca(), sizeof(struct paca_struct));
+	kexec_paca.data_offset = 0xedeaddeadeeeeeeeUL;
+	paca = (struct paca_struct *)RELOC_HIDE(&kexec_paca, 0) -
+		kexec_paca.paca_index;
+	setup_paca(&kexec_paca);
+
+	/* XXX: If anyone does 'dynamic lppacas' this will also need to be
+	 * switched to a static version!
+	 */
+
 	/* Some things are best done in assembly.  Finding globals with
 	 * a toc is easier in C, so pass in what we can.
 	 */
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 22e507c8a55..2d29752cbe1 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -127,29 +127,3 @@ _GLOBAL(__setup_cpu_power7)
 _GLOBAL(__restore_cpu_power7)
 	/* place holder */
 	blr
-
-/*
- * Get a minimal set of registers for our caller's nth caller.
- * r3 = regs pointer, r5 = n.
- *
- * We only get R1 (stack pointer), NIP (next instruction pointer)
- * and LR (link register).  These are all we can get in the
- * general case without doing complicated stack unwinding, but
- * fortunately they are enough to do a stack backtrace, which
- * is all we need them for.
- */
-_GLOBAL(perf_arch_fetch_caller_regs)
-	mr	r6,r1
-	cmpwi	r5,0
-	mflr	r4
-	ble	2f
-	mtctr	r5
-1:	PPC_LL	r6,0(r6)
-	bdnz	1b
-	PPC_LL	r4,PPC_LR_STKOFF(r6)
-2:	PPC_LL	r7,0(r6)
-	PPC_LL	r7,PPC_LR_STKOFF(r7)
-	PPC_STL	r6,GPR1-STACK_FRAME_OVERHEAD(r3)
-	PPC_STL	r4,_NIP-STACK_FRAME_OVERHEAD(r3)
-	PPC_STL	r7,_LINK-STACK_FRAME_OVERHEAD(r3)
-	blr
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
deleted file mode 100644
index df78e0236a0..00000000000
--- a/arch/powerpc/kernel/of_device.c
+++ /dev/null
@@ -1,133 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
-#include <linux/of_device.h>
-
-#include <asm/errno.h>
-#include <asm/dcr.h>
-
-static void of_device_make_bus_id(struct of_device *dev)
-{
-	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->dev.of_node;
-	const u32 *reg;
-	u64 addr;
-	int magic;
-
-	/*
-	 * If it's a DCR based device, use 'd' for native DCRs
-	 * and 'D' for MMIO DCRs.
-	 */
-#ifdef CONFIG_PPC_DCR
-	reg = of_get_property(node, "dcr-reg", NULL);
-	if (reg) {
-#ifdef CONFIG_PPC_DCR_NATIVE
-		dev_set_name(&dev->dev, "d%x.%s", *reg, node->name);
-#else /* CONFIG_PPC_DCR_NATIVE */
-		addr = of_translate_dcr_address(node, *reg, NULL);
-		if (addr != OF_BAD_ADDR) {
-			dev_set_name(&dev->dev, "D%llx.%s",
-				     (unsigned long long)addr, node->name);
-			return;
-		}
-#endif /* !CONFIG_PPC_DCR_NATIVE */
-	}
-#endif /* CONFIG_PPC_DCR */
-
-	/*
-	 * For MMIO, get the physical address
-	 */
-	reg = of_get_property(node, "reg", NULL);
-	if (reg) {
-		addr = of_translate_address(node, reg);
-		if (addr != OF_BAD_ADDR) {
-			dev_set_name(&dev->dev, "%llx.%s",
-				     (unsigned long long)addr, node->name);
-			return;
-		}
-	}
-
-	/*
-	 * No BusID, use the node name and add a globally incremented
-	 * counter (and pray...)
-	 */
-	magic = atomic_add_return(1, &bus_no_reg_magic);
-	dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
-}
-
-struct of_device *of_device_alloc(struct device_node *np,
-				  const char *bus_id,
-				  struct device *parent)
-{
-	struct of_device *dev;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return NULL;
-
-	dev->dev.of_node = of_node_get(np);
-	dev->dev.dma_mask = &dev->archdata.dma_mask;
-	dev->dev.parent = parent;
-	dev->dev.release = of_release_dev;
-
-	if (bus_id)
-		dev_set_name(&dev->dev, "%s", bus_id);
-	else
-		of_device_make_bus_id(dev);
-
-	return dev;
-}
-EXPORT_SYMBOL(of_device_alloc);
-
-int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct of_device *ofdev;
-	const char *compat;
-	int seen = 0, cplen, sl;
-
-	if (!dev)
-		return -ENODEV;
-
-	ofdev = to_of_device(dev);
-
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
-		return -ENOMEM;
-
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
-		return -ENOMEM;
-
-        /* Since the compatible field can contain pretty much anything
-         * it's not really legal to split it out with commas. We split it
-         * up using a number of environment variables instead. */
-
-	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
-	while (compat && *compat && cplen > 0) {
-		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
-			return -ENOMEM;
-
-		sl = strlen (compat) + 1;
-		compat += sl;
-		cplen -= sl;
-		seen++;
-	}
-
-	if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
-		return -ENOMEM;
-
-	/* modalias is trickier, we add it in 2 steps */
-	if (add_uevent_var(env, "MODALIAS="))
-		return -ENOMEM;
-	sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1],
-				    sizeof(env->buf) - env->buflen);
-	if (sl >= (sizeof(env->buf) - env->buflen))
-		return -ENOMEM;
-	env->buflen += sl;
-
-	return 0;
-}
-EXPORT_SYMBOL(of_device_uevent);
-EXPORT_SYMBOL(of_device_get_modalias);
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 487a98851ba..b2c363ef38a 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -28,207 +28,6 @@
 #include <asm/ppc-pci.h>
 #include <asm/atomic.h>
 
-/*
- * The list of OF IDs below is used for matching bus types in the
- * system whose devices are to be exposed as of_platform_devices.
- *
- * This is the default list valid for most platforms. This file provides
- * functions who can take an explicit list if necessary though
- *
- * The search is always performed recursively looking for children of
- * the provided device_node and recursively if such a children matches
- * a bus type in the list
- */
-
-static const struct of_device_id of_default_bus_ids[] = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .type = "spider", },
-	{ .type = "axon", },
-	{ .type = "plb5", },
-	{ .type = "plb4", },
-	{ .type = "opb", },
-	{ .type = "ebc", },
-	{},
-};
-
-struct bus_type of_platform_bus_type = {
-       .uevent	= of_device_uevent,
-};
-EXPORT_SYMBOL(of_platform_bus_type);
-
-static int __init of_bus_driver_init(void)
-{
-	return of_bus_type_init(&of_platform_bus_type, "of_platform");
-}
-
-postcore_initcall(of_bus_driver_init);
-
-struct of_device* of_platform_device_create(struct device_node *np,
-					    const char *bus_id,
-					    struct device *parent)
-{
-	struct of_device *dev;
-
-	dev = of_device_alloc(np, bus_id, parent);
-	if (!dev)
-		return NULL;
-
-	dev->archdata.dma_mask = 0xffffffffUL;
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	dev->dev.bus = &of_platform_bus_type;
-
-	/* We do not fill the DMA ops for platform devices by default.
-	 * This is currently the responsibility of the platform code
-	 * to do such, possibly using a device notifier
-	 */
-
-	if (of_device_register(dev) != 0) {
-		of_device_free(dev);
-		return NULL;
-	}
-
-	return dev;
-}
-EXPORT_SYMBOL(of_platform_device_create);
-
-
-
-/**
- * of_platform_bus_create - Create an OF device for a bus node and all its
- * children. Optionally recursively instanciate matching busses.
- * @bus: device node of the bus to instanciate
- * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
- * disallow recursive creation of child busses
- */
-static int of_platform_bus_create(const struct device_node *bus,
-				  const struct of_device_id *matches,
-				  struct device *parent)
-{
-	struct device_node *child;
-	struct of_device *dev;
-	int rc = 0;
-
-	for_each_child_of_node(bus, child) {
-		pr_debug("   create child: %s\n", child->full_name);
-		dev = of_platform_device_create(child, NULL, parent);
-		if (dev == NULL)
-			rc = -ENOMEM;
-		else if (!of_match_node(matches, child))
-			continue;
-		if (rc == 0) {
-			pr_debug("   and sub busses\n");
-			rc = of_platform_bus_create(child, matches, &dev->dev);
-		} if (rc) {
-			of_node_put(child);
-			break;
-		}
-	}
-	return rc;
-}
-
-/**
- * of_platform_bus_probe - Probe the device-tree for platform busses
- * @root: parent of the first level to probe or NULL for the root of the tree
- * @matches: match table, NULL to use the default
- * @parent: parent to hook devices from, NULL for toplevel
- *
- * Note that children of the provided root are not instanciated as devices
- * unless the specified root itself matches the bus list and is not NULL.
- */
-
-int of_platform_bus_probe(struct device_node *root,
-			  const struct of_device_id *matches,
-			  struct device *parent)
-{
-	struct device_node *child;
-	struct of_device *dev;
-	int rc = 0;
-
-	if (matches == NULL)
-		matches = of_default_bus_ids;
-	if (matches == OF_NO_DEEP_PROBE)
-		return -EINVAL;
-	if (root == NULL)
-		root = of_find_node_by_path("/");
-	else
-		of_node_get(root);
-
-	pr_debug("of_platform_bus_probe()\n");
-	pr_debug(" starting at: %s\n", root->full_name);
-
-	/* Do a self check of bus type, if there's a match, create
-	 * children
-	 */
-	if (of_match_node(matches, root)) {
-		pr_debug(" root match, create all sub devices\n");
-		dev = of_platform_device_create(root, NULL, parent);
-		if (dev == NULL) {
-			rc = -ENOMEM;
-			goto bail;
-		}
-		pr_debug(" create all sub busses\n");
-		rc = of_platform_bus_create(root, matches, &dev->dev);
-		goto bail;
-	}
-	for_each_child_of_node(root, child) {
-		if (!of_match_node(matches, child))
-			continue;
-
-		pr_debug("  match: %s\n", child->full_name);
-		dev = of_platform_device_create(child, NULL, parent);
-		if (dev == NULL)
-			rc = -ENOMEM;
-		else
-			rc = of_platform_bus_create(child, matches, &dev->dev);
-		if (rc) {
-			of_node_put(child);
-			break;
-		}
-	}
- bail:
-	of_node_put(root);
-	return rc;
-}
-EXPORT_SYMBOL(of_platform_bus_probe);
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
-	return to_of_device(dev)->dev.of_node == data;
-}
-
-struct of_device *of_find_device_by_node(struct device_node *np)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&of_platform_bus_type,
-			      NULL, np, of_dev_node_match);
-	if (dev)
-		return to_of_device(dev);
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
-static int of_dev_phandle_match(struct device *dev, void *data)
-{
-	phandle *ph = data;
-	return to_of_device(dev)->dev.of_node->phandle == *ph;
-}
-
-struct of_device *of_find_device_by_phandle(phandle ph)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&of_platform_bus_type,
-			      NULL, &ph, of_dev_phandle_match);
-	if (dev)
-		return to_of_device(dev);
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_phandle);
-
-
 #ifdef CONFIG_PPC_OF_PLATFORM_PCI
 
 /* The probing of PCI controllers from of_platform is currently
@@ -237,7 +36,7 @@ EXPORT_SYMBOL(of_find_device_by_phandle);
  * lacking some bits needed here.
  */
 
-static int __devinit of_pci_phb_probe(struct of_device *dev,
+static int __devinit of_pci_phb_probe(struct platform_device *dev,
 				      const struct of_device_id *match)
 {
 	struct pci_controller *phb;
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 139a773853f..d0a26f1770f 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -105,6 +105,16 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 #endif /* CONFIG_PPC_STD_MMU_64 */
 }
 
+/* Put the paca pointer into r13 and SPRG_PACA */
+void setup_paca(struct paca_struct *new_paca)
+{
+	local_paca = new_paca;
+	mtspr(SPRN_SPRG_PACA, local_paca);
+#ifdef CONFIG_PPC_BOOK3E
+	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#endif
+}
+
 static int __initdata paca_size;
 
 void __init allocate_pacas(void)
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5b38f6ae2b2..9021c4ad4bb 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -21,6 +21,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/of_address.h>
 #include <linux/mm.h>
 #include <linux/list.h>
 #include <linux/syscalls.h>
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 5c14ffe5125..d301a30445e 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -410,15 +410,15 @@ static void power_pmu_read(struct perf_event *event)
 	 * Therefore we treat them like NMIs.
 	 */
 	do {
-		prev = atomic64_read(&event->hw.prev_count);
+		prev = local64_read(&event->hw.prev_count);
 		barrier();
 		val = read_pmc(event->hw.idx);
-	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+	} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
 
 	/* The counters are only 32 bits wide */
 	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &event->hw.period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &event->hw.period_left);
 }
 
 /*
@@ -444,10 +444,10 @@ static void freeze_limited_counters(struct cpu_hw_events *cpuhw,
 		if (!event->hw.idx)
 			continue;
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
-		prev = atomic64_read(&event->hw.prev_count);
+		prev = local64_read(&event->hw.prev_count);
 		event->hw.idx = 0;
 		delta = (val - prev) & 0xfffffffful;
-		atomic64_add(delta, &event->count);
+		local64_add(delta, &event->count);
 	}
 }
 
@@ -462,7 +462,7 @@ static void thaw_limited_counters(struct cpu_hw_events *cpuhw,
 		event = cpuhw->limited_counter[i];
 		event->hw.idx = cpuhw->limited_hwidx[i];
 		val = (event->hw.idx == 5) ? pmc5 : pmc6;
-		atomic64_set(&event->hw.prev_count, val);
+		local64_set(&event->hw.prev_count, val);
 		perf_event_update_userpage(event);
 	}
 }
@@ -666,11 +666,11 @@ void hw_perf_enable(void)
 		}
 		val = 0;
 		if (event->hw.sample_period) {
-			left = atomic64_read(&event->hw.period_left);
+			left = local64_read(&event->hw.period_left);
 			if (left < 0x80000000L)
 				val = 0x80000000L - left;
 		}
-		atomic64_set(&event->hw.prev_count, val);
+		local64_set(&event->hw.prev_count, val);
 		event->hw.idx = idx;
 		write_pmc(idx, val);
 		perf_event_update_userpage(event);
@@ -754,7 +754,7 @@ static int power_pmu_enable(struct perf_event *event)
 	 * skip the schedulability test here, it will be peformed
 	 * at commit time(->commit_txn) as a whole
 	 */
-	if (cpuhw->group_flag & PERF_EVENT_TXN_STARTED)
+	if (cpuhw->group_flag & PERF_EVENT_TXN)
 		goto nocheck;
 
 	if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
@@ -845,8 +845,8 @@ static void power_pmu_unthrottle(struct perf_event *event)
 	if (left < 0x80000000L)
 		val = 0x80000000L - left;
 	write_pmc(event->hw.idx, val);
-	atomic64_set(&event->hw.prev_count, val);
-	atomic64_set(&event->hw.period_left, left);
+	local64_set(&event->hw.prev_count, val);
+	local64_set(&event->hw.period_left, left);
 	perf_event_update_userpage(event);
 	perf_enable();
 	local_irq_restore(flags);
@@ -861,7 +861,7 @@ void power_pmu_start_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
 
-	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuhw->group_flag |= PERF_EVENT_TXN;
 	cpuhw->n_txn_start = cpuhw->n_events;
 }
 
@@ -874,7 +874,7 @@ void power_pmu_cancel_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
 
-	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+	cpuhw->group_flag &= ~PERF_EVENT_TXN;
 }
 
 /*
@@ -900,6 +900,7 @@ int power_pmu_commit_txn(const struct pmu *pmu)
 	for (i = cpuhw->n_txn_start; i < n; ++i)
 		cpuhw->event[i]->hw.config = cpuhw->events[i];
 
+	cpuhw->group_flag &= ~PERF_EVENT_TXN;
 	return 0;
 }
 
@@ -1111,7 +1112,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 	event->hw.config = events[n];
 	event->hw.event_base = cflags[n];
 	event->hw.last_period = event->hw.sample_period;
-	atomic64_set(&event->hw.period_left, event->hw.last_period);
+	local64_set(&event->hw.period_left, event->hw.last_period);
 
 	/*
 	 * See if we need to reserve the PMU.
@@ -1149,16 +1150,16 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	int record = 0;
 
 	/* we don't have to worry about interrupts here */
-	prev = atomic64_read(&event->hw.prev_count);
+	prev = local64_read(&event->hw.prev_count);
 	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &event->count);
+	local64_add(delta, &event->count);
 
 	/*
 	 * See if the total period for this event has expired,
 	 * and update for the next period.
 	 */
 	val = 0;
-	left = atomic64_read(&event->hw.period_left) - delta;
+	left = local64_read(&event->hw.period_left) - delta;
 	if (period) {
 		if (left <= 0) {
 			left += period;
@@ -1196,8 +1197,8 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	}
 
 	write_pmc(event->hw.idx, val);
-	atomic64_set(&event->hw.prev_count, val);
-	atomic64_set(&event->hw.period_left, left);
+	local64_set(&event->hw.prev_count, val);
+	local64_set(&event->hw.period_left, left);
 	perf_event_update_userpage(event);
 }
 
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index babcceecd2e..1ba45471ae4 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -162,15 +162,15 @@ static void fsl_emb_pmu_read(struct perf_event *event)
 	 * Therefore we treat them like NMIs.
 	 */
 	do {
-		prev = atomic64_read(&event->hw.prev_count);
+		prev = local64_read(&event->hw.prev_count);
 		barrier();
 		val = read_pmc(event->hw.idx);
-	} while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
+	} while (local64_cmpxchg(&event->hw.prev_count, prev, val) != prev);
 
 	/* The counters are only 32 bits wide */
 	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &event->hw.period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &event->hw.period_left);
 }
 
 /*
@@ -296,11 +296,11 @@ static int fsl_emb_pmu_enable(struct perf_event *event)
 
 	val = 0;
 	if (event->hw.sample_period) {
-		s64 left = atomic64_read(&event->hw.period_left);
+		s64 left = local64_read(&event->hw.period_left);
 		if (left < 0x80000000L)
 			val = 0x80000000L - left;
 	}
-	atomic64_set(&event->hw.prev_count, val);
+	local64_set(&event->hw.prev_count, val);
 	write_pmc(i, val);
 	perf_event_update_userpage(event);
 
@@ -371,8 +371,8 @@ static void fsl_emb_pmu_unthrottle(struct perf_event *event)
 	if (left < 0x80000000L)
 		val = 0x80000000L - left;
 	write_pmc(event->hw.idx, val);
-	atomic64_set(&event->hw.prev_count, val);
-	atomic64_set(&event->hw.period_left, left);
+	local64_set(&event->hw.prev_count, val);
+	local64_set(&event->hw.period_left, left);
 	perf_event_update_userpage(event);
 	perf_enable();
 	local_irq_restore(flags);
@@ -500,7 +500,7 @@ const struct pmu *hw_perf_event_init(struct perf_event *event)
 		return ERR_PTR(-ENOTSUPP);
 
 	event->hw.last_period = event->hw.sample_period;
-	atomic64_set(&event->hw.period_left, event->hw.last_period);
+	local64_set(&event->hw.period_left, event->hw.last_period);
 
 	/*
 	 * See if we need to reserve the PMU.
@@ -541,16 +541,16 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	int record = 0;
 
 	/* we don't have to worry about interrupts here */
-	prev = atomic64_read(&event->hw.prev_count);
+	prev = local64_read(&event->hw.prev_count);
 	delta = (val - prev) & 0xfffffffful;
-	atomic64_add(delta, &event->count);
+	local64_add(delta, &event->count);
 
 	/*
 	 * See if the total period for this event has expired,
 	 * and update for the next period.
 	 */
 	val = 0;
-	left = atomic64_read(&event->hw.period_left) - delta;
+	left = local64_read(&event->hw.period_left) - delta;
 	if (period) {
 		if (left <= 0) {
 			left += period;
@@ -569,6 +569,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 		struct perf_sample_data data;
 
 		perf_sample_data_init(&data, 0);
+		data.period = event->hw.last_period;
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*
@@ -584,8 +585,8 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	}
 
 	write_pmc(event->hw.idx, val);
-	atomic64_set(&event->hw.prev_count, val);
-	atomic64_set(&event->hw.period_left, left);
+	local64_set(&event->hw.prev_count, val);
+	local64_set(&event->hw.period_left, left);
 	perf_event_update_userpage(event);
 }
 
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 773424df828..e78a5add7f1 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -37,6 +37,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/personality.h>
 #include <linux/random.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
@@ -462,14 +463,42 @@ struct task_struct *__switch_to(struct task_struct *prev,
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	switch_booke_debug_regs(&new->thread);
 #else
+/*
+ * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
+ * schedule DABR
+ */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 #endif
 
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
+#if defined(CONFIG_PPC_BOOK3E_64)
+	/* XXX Current Book3E code doesn't deal with kernel side DBCR0,
+	 * we always hold the user values, so we set it now.
+	 *
+	 * However, we ensure the kernel MSR:DE is appropriately cleared too
+	 * to avoid spurrious single step exceptions in the kernel.
+	 *
+	 * This will have to change to merge with the ppc32 code at some point,
+	 * but I don't like much what ppc32 is doing today so there's some
+	 * thinking needed there
+	 */
+	if ((new_thread->dbcr0 | old_thread->dbcr0) & DBCR0_IDM) {
+		u32 dbcr0;
+
+		mtmsr(mfmsr() & ~MSR_DE);
+		isync();
+		dbcr0 = mfspr(SPRN_DBCR0);
+		dbcr0 = (dbcr0 & DBCR0_EDM) | new_thread->dbcr0;
+		mtspr(SPRN_DBCR0, dbcr0);
+	}
+#endif /* CONFIG_PPC64_BOOK3E */
+
 #ifdef CONFIG_PPC64
 	/*
 	 * Collect processor utilization data per process
@@ -642,7 +671,11 @@ void flush_thread(void)
 {
 	discard_lazy_cpu_state();
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINTS
+	flush_ptrace_hw_breakpoint(current);
+#else /* CONFIG_HAVE_HW_BREAKPOINTS */
 	set_debug_reg_defaults(&current->thread);
+#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
 }
 
 void
@@ -660,6 +693,9 @@ void prepare_to_copy(struct task_struct *tsk)
 	flush_altivec_to_thread(current);
 	flush_vsx_to_thread(current);
 	flush_spe_to_thread(current);
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	flush_ptrace_hw_breakpoint(tsk);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 }
 
 /*
@@ -1263,3 +1299,14 @@ unsigned long randomize_et_dyn(unsigned long base)
 
 	return ret;
 }
+
+#ifdef CONFIG_SMP
+int arch_sd_sibling_asym_packing(void)
+{
+	if (cpu_has_feature(CPU_FTR_ASYM_SMT)) {
+		printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n");
+		return SD_ASYM_PACKING;
+	}
+	return 0;
+}
+#endif
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 3b6f8ae9b8c..941ff4dbc56 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -311,6 +311,24 @@ static void __init prom_print_hex(unsigned long val)
 	call_prom("write", 3, 1, _prom->stdout, buf, nibbles);
 }
 
+/* max number of decimal digits in an unsigned long */
+#define UL_DIGITS 21
+static void __init prom_print_dec(unsigned long val)
+{
+	int i, size;
+	char buf[UL_DIGITS+1];
+	struct prom_t *_prom = &RELOC(prom);
+
+	for (i = UL_DIGITS-1; i >= 0;  i--) {
+		buf[i] = (val % 10) + '0';
+		val = val/10;
+		if (val == 0)
+			break;
+	}
+	/* shift stuff down */
+	size = UL_DIGITS - i;
+	call_prom("write", 3, 1, _prom->stdout, buf+i, size);
+}
 
 static void __init prom_printf(const char *format, ...)
 {
@@ -350,6 +368,14 @@ static void __init prom_printf(const char *format, ...)
 			v = va_arg(args, unsigned long);
 			prom_print_hex(v);
 			break;
+		case 'l':
+			++q;
+			if (*q == 'u') { /* '%lu' */
+				++q;
+				v = va_arg(args, unsigned long);
+				prom_print_dec(v);
+			}
+			break;
 		}
 	}
 }
@@ -835,11 +861,11 @@ static int __init prom_count_smt_threads(void)
 		if (plen == PROM_ERROR)
 			break;
 		plen >>= 2;
-		prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen);
+		prom_debug("Found %lu smt threads per core\n", (unsigned long)plen);
 
 		/* Sanity check */
 		if (plen < 1 || plen > 64) {
-			prom_printf("Threads per core 0x%x out of bounds, assuming 1\n",
+			prom_printf("Threads per core %lu out of bounds, assuming 1\n",
 				    (unsigned long)plen);
 			return 1;
 		}
@@ -869,12 +895,12 @@ static void __init prom_send_capabilities(void)
 		cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]);
 		if (*cores != NR_CPUS) {
 			prom_printf("WARNING ! "
-				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
+				    "ibm_architecture_vec structure inconsistent: %lu!\n",
 				    *cores);
 		} else {
 			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
-			prom_printf("Max number of cores passed to firmware: 0x%x\n",
-				    (unsigned long)*cores);
+			prom_printf("Max number of cores passed to firmware: %lu (NR_CPUS = %lu)\n",
+				    *cores, NR_CPUS);
 		}
 
 		/* try calling the ibm,client-architecture-support method */
@@ -1482,7 +1508,7 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("cpu hw idx   = 0x%x\n", reg);
+		prom_debug("cpu hw idx   = %lu\n", reg);
 
 		/* Init the acknowledge var which will be reset by
 		 * the secondary cpu when it awakens from its OF
@@ -1492,7 +1518,7 @@ static void __init prom_hold_cpus(void)
 
 		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("starting cpu hw idx %x... ", reg);
+			prom_printf("starting cpu hw idx %lu... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1507,7 +1533,7 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("boot cpu hw idx %x\n", reg);
+			prom_printf("boot cpu hw idx %lu\n", reg);
 #endif /* CONFIG_SMP */
 	}
 
@@ -2420,7 +2446,7 @@ static void __init prom_find_boot_cpu(void)
 	prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval));
 	_prom->cpu = getprop_rval;
 
-	prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu);
+	prom_debug("Booting CPU hw index = %lu\n", _prom->cpu);
 }
 
 static void __init prom_check_initrd(unsigned long r3, unsigned long r4)
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 8362620c9e6..88334af038e 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -6,232 +6,11 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/etherdevice.h>
+#include <linux/of_address.h>
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
-#ifdef DEBUG
-#define DBG(fmt...) do { printk(fmt); } while(0)
-#else
-#define DBG(fmt...) do { } while(0)
-#endif
-
-#ifdef CONFIG_PPC64
-#define PRu64	"%lx"
-#else
-#define PRu64	"%llx"
-#endif
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-#define OF_CHECK_COUNTS(na, ns)	((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
-			(ns) > 0)
-
-static struct of_bus *of_match_bus(struct device_node *np);
-static int __of_address_to_resource(struct device_node *dev,
-		const u32 *addrp, u64 size, unsigned int flags,
-		struct resource *r);
-
-
-/* Debug utility */
-#ifdef DEBUG
-static void of_dump_addr(const char *s, const u32 *addr, int na)
-{
-	printk("%s", s);
-	while(na--)
-		printk(" %08x", *(addr++));
-	printk("\n");
-}
-#else
-static void of_dump_addr(const char *s, const u32 *addr, int na) { }
-#endif
-
-
-/* Callbacks for bus specific translators */
-struct of_bus {
-	const char	*name;
-	const char	*addresses;
-	int		(*match)(struct device_node *parent);
-	void		(*count_cells)(struct device_node *child,
-				       int *addrc, int *sizec);
-	u64		(*map)(u32 *addr, const u32 *range,
-				int na, int ns, int pna);
-	int		(*translate)(u32 *addr, u64 offset, int na);
-	unsigned int	(*get_flags)(const u32 *addr);
-};
-
-
-/*
- * Default translator (generic bus)
- */
-
-static void of_bus_default_count_cells(struct device_node *dev,
-				       int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = of_n_addr_cells(dev);
-	if (sizec)
-		*sizec = of_n_size_cells(dev);
-}
-
-static u64 of_bus_default_map(u32 *addr, const u32 *range,
-		int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	cp = of_read_number(range, na);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr, na);
-
-	DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
-	    cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
-{
-	u64 a = of_read_number(addr, na);
-	memset(addr, 0, na * 4);
-	a += offset;
-	if (na > 1)
-		addr[na - 2] = a >> 32;
-	addr[na - 1] = a & 0xffffffffu;
-
-	return 0;
-}
-
-static unsigned int of_bus_default_get_flags(const u32 *addr)
-{
-	return IORESOURCE_MEM;
-}
-
-
 #ifdef CONFIG_PCI
-/*
- * PCI bus specific translator
- */
-
-static int of_bus_pci_match(struct device_node *np)
-{
-	/* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
-	return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
-}
-
-static void of_bus_pci_count_cells(struct device_node *np,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 3;
-	if (sizec)
-		*sizec = 2;
-}
-
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
-static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	u64 cp, s, da;
-	unsigned int af, rf;
-
-	af = of_bus_pci_get_flags(addr);
-	rf = of_bus_pci_get_flags(range);
-
-	/* Check address type match */
-	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
-		return OF_BAD_ADDR;
-
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
-			unsigned int *flags)
-{
-	const u32 *prop;
-	unsigned int psize;
-	struct device_node *parent;
-	struct of_bus *bus;
-	int onesize, i, na, ns;
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		return NULL;
-	bus = of_match_bus(parent);
-	if (strcmp(bus->name, "pci")) {
-		of_node_put(parent);
-		return NULL;
-	}
-	bus->count_cells(dev, &na, &ns);
-	of_node_put(parent);
-	if (!OF_CHECK_COUNTS(na, ns))
-		return NULL;
-
-	/* Get "reg" or "assigned-addresses" property */
-	prop = of_get_property(dev, bus->addresses, &psize);
-	if (prop == NULL)
-		return NULL;
-	psize /= 4;
-
-	onesize = na + ns;
-	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
-		if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
-			if (size)
-				*size = of_read_number(prop + na, ns);
-			if (flags)
-				*flags = bus->get_flags(prop);
-			return prop;
-		}
-	return NULL;
-}
-EXPORT_SYMBOL(of_get_pci_address);
-
-int of_pci_address_to_resource(struct device_node *dev, int bar,
-			       struct resource *r)
-{
-	const u32	*addrp;
-	u64		size;
-	unsigned int	flags;
-
-	addrp = of_get_pci_address(dev, bar, &size, &flags);
-	if (addrp == NULL)
-		return -EINVAL;
-	return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
-
 int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 {
 	struct device_node *dn, *ppnode;
@@ -313,345 +92,6 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
 EXPORT_SYMBOL_GPL(of_irq_map_pci);
 #endif /* CONFIG_PCI */
 
-/*
- * ISA bus specific translator
- */
-
-static int of_bus_isa_match(struct device_node *np)
-{
-	return !strcmp(np->name, "isa");
-}
-
-static void of_bus_isa_count_cells(struct device_node *child,
-				   int *addrc, int *sizec)
-{
-	if (addrc)
-		*addrc = 2;
-	if (sizec)
-		*sizec = 1;
-}
-
-static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
-{
-	u64 cp, s, da;
-
-	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x00000001)
-		return OF_BAD_ADDR;
-
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
-}
-
-static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
-{
-	return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_isa_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	if (w & 1)
-		flags |= IORESOURCE_IO;
-	else
-		flags |= IORESOURCE_MEM;
-	return flags;
-}
-
-
-/*
- * Array of bus specific translators
- */
-
-static struct of_bus of_busses[] = {
-#ifdef CONFIG_PCI
-	/* PCI */
-	{
-		.name = "pci",
-		.addresses = "assigned-addresses",
-		.match = of_bus_pci_match,
-		.count_cells = of_bus_pci_count_cells,
-		.map = of_bus_pci_map,
-		.translate = of_bus_pci_translate,
-		.get_flags = of_bus_pci_get_flags,
-	},
-#endif /* CONFIG_PCI */
-	/* ISA */
-	{
-		.name = "isa",
-		.addresses = "reg",
-		.match = of_bus_isa_match,
-		.count_cells = of_bus_isa_count_cells,
-		.map = of_bus_isa_map,
-		.translate = of_bus_isa_translate,
-		.get_flags = of_bus_isa_get_flags,
-	},
-	/* Default */
-	{
-		.name = "default",
-		.addresses = "reg",
-		.match = NULL,
-		.count_cells = of_bus_default_count_cells,
-		.map = of_bus_default_map,
-		.translate = of_bus_default_translate,
-		.get_flags = of_bus_default_get_flags,
-	},
-};
-
-static struct of_bus *of_match_bus(struct device_node *np)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(of_busses); i ++)
-		if (!of_busses[i].match || of_busses[i].match(np))
-			return &of_busses[i];
-	BUG();
-	return NULL;
-}
-
-static int of_translate_one(struct device_node *parent, struct of_bus *bus,
-			    struct of_bus *pbus, u32 *addr,
-			    int na, int ns, int pna, const char *rprop)
-{
-	const u32 *ranges;
-	unsigned int rlen;
-	int rone;
-	u64 offset = OF_BAD_ADDR;
-
-	/* Normally, an absence of a "ranges" property means we are
-	 * crossing a non-translatable boundary, and thus the addresses
-	 * below the current not cannot be converted to CPU physical ones.
-	 * Unfortunately, while this is very clear in the spec, it's not
-	 * what Apple understood, and they do have things like /uni-n or
-	 * /ht nodes with no "ranges" property and a lot of perfectly
-	 * useable mapped devices below them. Thus we treat the absence of
-	 * "ranges" as equivalent to an empty "ranges" property which means
-	 * a 1:1 translation at that level. It's up to the caller not to try
-	 * to translate addresses that aren't supposed to be translated in
-	 * the first place. --BenH.
-	 */
-	ranges = of_get_property(parent, rprop, &rlen);
-	if (ranges == NULL || rlen == 0) {
-		offset = of_read_number(addr, na);
-		memset(addr, 0, pna * 4);
-		DBG("OF: no ranges, 1:1 translation\n");
-		goto finish;
-	}
-
-	DBG("OF: walking ranges...\n");
-
-	/* Now walk through the ranges */
-	rlen /= 4;
-	rone = na + pna + ns;
-	for (; rlen >= rone; rlen -= rone, ranges += rone) {
-		offset = bus->map(addr, ranges, na, ns, pna);
-		if (offset != OF_BAD_ADDR)
-			break;
-	}
-	if (offset == OF_BAD_ADDR) {
-		DBG("OF: not found !\n");
-		return 1;
-	}
-	memcpy(addr, ranges + na, 4 * pna);
-
- finish:
-	of_dump_addr("OF: parent translation for:", addr, pna);
-	DBG("OF: with offset: "PRu64"\n", offset);
-
-	/* Translate it into parent bus space */
-	return pbus->translate(addr, offset, pna);
-}
-
-
-/*
- * Translate an address from the device-tree into a CPU physical address,
- * this walks up the tree and applies the various bus mappings on the
- * way.
- *
- * Note: We consider that crossing any level with #size-cells == 0 to mean
- * that translation is impossible (that is we are not dealing with a value
- * that can be mapped to a cpu physical address). This is not really specified
- * that way, but this is traditionally the way IBM at least do things
- */
-u64 __of_translate_address(struct device_node *dev, const u32 *in_addr,
-			   const char *rprop)
-{
-	struct device_node *parent = NULL;
-	struct of_bus *bus, *pbus;
-	u32 addr[OF_MAX_ADDR_CELLS];
-	int na, ns, pna, pns;
-	u64 result = OF_BAD_ADDR;
-
-	DBG("OF: ** translation for device %s **\n", dev->full_name);
-
-	/* Increase refcount at current level */
-	of_node_get(dev);
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		goto bail;
-	bus = of_match_bus(parent);
-
-	/* Cound address cells & copy address locally */
-	bus->count_cells(dev, &na, &ns);
-	if (!OF_CHECK_COUNTS(na, ns)) {
-		printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
-		       dev->full_name);
-		goto bail;
-	}
-	memcpy(addr, in_addr, na * 4);
-
-	DBG("OF: bus is %s (na=%d, ns=%d) on %s\n",
-	    bus->name, na, ns, parent->full_name);
-	of_dump_addr("OF: translating address:", addr, na);
-
-	/* Translate */
-	for (;;) {
-		/* Switch to parent bus */
-		of_node_put(dev);
-		dev = parent;
-		parent = of_get_parent(dev);
-
-		/* If root, we have finished */
-		if (parent == NULL) {
-			DBG("OF: reached root node\n");
-			result = of_read_number(addr, na);
-			break;
-		}
-
-		/* Get new parent bus and counts */
-		pbus = of_match_bus(parent);
-		pbus->count_cells(dev, &pna, &pns);
-		if (!OF_CHECK_COUNTS(pna, pns)) {
-			printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
-			       dev->full_name);
-			break;
-		}
-
-		DBG("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
-		    pbus->name, pna, pns, parent->full_name);
-
-		/* Apply bus translation */
-		if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
-			break;
-
-		/* Complete the move up one level */
-		na = pna;
-		ns = pns;
-		bus = pbus;
-
-		of_dump_addr("OF: one level translation:", addr, na);
-	}
- bail:
-	of_node_put(parent);
-	of_node_put(dev);
-
-	return result;
-}
-
-u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
-{
-	return __of_translate_address(dev, in_addr, "ranges");
-}
-EXPORT_SYMBOL(of_translate_address);
-
-u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr)
-{
-	return __of_translate_address(dev, in_addr, "dma-ranges");
-}
-EXPORT_SYMBOL(of_translate_dma_address);
-
-const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
-		    unsigned int *flags)
-{
-	const u32 *prop;
-	unsigned int psize;
-	struct device_node *parent;
-	struct of_bus *bus;
-	int onesize, i, na, ns;
-
-	/* Get parent & match bus type */
-	parent = of_get_parent(dev);
-	if (parent == NULL)
-		return NULL;
-	bus = of_match_bus(parent);
-	bus->count_cells(dev, &na, &ns);
-	of_node_put(parent);
-	if (!OF_CHECK_COUNTS(na, ns))
-		return NULL;
-
-	/* Get "reg" or "assigned-addresses" property */
-	prop = of_get_property(dev, bus->addresses, &psize);
-	if (prop == NULL)
-		return NULL;
-	psize /= 4;
-
-	onesize = na + ns;
-	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
-		if (i == index) {
-			if (size)
-				*size = of_read_number(prop + na, ns);
-			if (flags)
-				*flags = bus->get_flags(prop);
-			return prop;
-		}
-	return NULL;
-}
-EXPORT_SYMBOL(of_get_address);
-
-static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
-				    u64 size, unsigned int flags,
-				    struct resource *r)
-{
-	u64 taddr;
-
-	if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
-		return -EINVAL;
-	taddr = of_translate_address(dev, addrp);
-	if (taddr == OF_BAD_ADDR)
-		return -EINVAL;
-	memset(r, 0, sizeof(struct resource));
-	if (flags & IORESOURCE_IO) {
-		unsigned long port;
-		port = pci_address_to_pio(taddr);
-		if (port == (unsigned long)-1)
-			return -EINVAL;
-		r->start = port;
-		r->end = port + size - 1;
-	} else {
-		r->start = taddr;
-		r->end = taddr + size - 1;
-	}
-	r->flags = flags;
-	r->name = dev->name;
-	return 0;
-}
-
-int of_address_to_resource(struct device_node *dev, int index,
-			   struct resource *r)
-{
-	const u32	*addrp;
-	u64		size;
-	unsigned int	flags;
-
-	addrp = of_get_address(dev, index, &size, &flags);
-	if (addrp == NULL)
-		return -EINVAL;
-	return __of_address_to_resource(dev, addrp, size, flags, r);
-}
-EXPORT_SYMBOL_GPL(of_address_to_resource);
-
 void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 		unsigned long *busno, unsigned long *phys, unsigned long *size)
 {
@@ -678,342 +118,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
 	*size = of_read_number(dma_window, cells);
 }
 
-/*
- * Interrupt remapper
- */
-
-static unsigned int of_irq_workarounds;
-static struct device_node *of_irq_dflt_pic;
-
-static struct device_node *of_irq_find_parent(struct device_node *child)
-{
-	struct device_node *p;
-	const phandle *parp;
-
-	if (!of_node_get(child))
-		return NULL;
-
-	do {
-		parp = of_get_property(child, "interrupt-parent", NULL);
-		if (parp == NULL)
-			p = of_get_parent(child);
-		else {
-			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
-				p = of_node_get(of_irq_dflt_pic);
-			else
-				p = of_find_node_by_phandle(*parp);
-		}
-		of_node_put(child);
-		child = p;
-	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
-
-	return p;
-}
-
-/* This doesn't need to be called if you don't have any special workaround
- * flags to pass
- */
-void of_irq_map_init(unsigned int flags)
-{
-	of_irq_workarounds = flags;
-
-	/* OldWorld, don't bother looking at other things */
-	if (flags & OF_IMAP_OLDWORLD_MAC)
-		return;
-
-	/* If we don't have phandles, let's try to locate a default interrupt
-	 * controller (happens when booting with BootX). We do a first match
-	 * here, hopefully, that only ever happens on machines with one
-	 * controller.
-	 */
-	if (flags & OF_IMAP_NO_PHANDLE) {
-		struct device_node *np;
-
-		for_each_node_with_property(np, "interrupt-controller") {
-			/* Skip /chosen/interrupt-controller */
-			if (strcmp(np->name, "chosen") == 0)
-				continue;
-			/* It seems like at least one person on this planet wants
-			 * to use BootX on a machine with an AppleKiwi controller
-			 * which happens to pretend to be an interrupt
-			 * controller too.
-			 */
-			if (strcmp(np->name, "AppleKiwi") == 0)
-				continue;
-			/* I think we found one ! */
-			of_irq_dflt_pic = np;
-			break;
-		}
-	}
-
-}
-
-int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
-		const u32 *addr, struct of_irq *out_irq)
-{
-	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
-	const u32 *tmp, *imap, *imask;
-	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
-	int imaplen, match, i;
-
-	DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
-	    parent->full_name, intspec[0], intspec[1], ointsize);
-
-	ipar = of_node_get(parent);
-
-	/* First get the #interrupt-cells property of the current cursor
-	 * that tells us how to interpret the passed-in intspec. If there
-	 * is none, we are nice and just walk up the tree
-	 */
-	do {
-		tmp = of_get_property(ipar, "#interrupt-cells", NULL);
-		if (tmp != NULL) {
-			intsize = *tmp;
-			break;
-		}
-		tnode = ipar;
-		ipar = of_irq_find_parent(ipar);
-		of_node_put(tnode);
-	} while (ipar);
-	if (ipar == NULL) {
-		DBG(" -> no parent found !\n");
-		goto fail;
-	}
-
-	DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
-
-	if (ointsize != intsize)
-		return -EINVAL;
-
-	/* Look for this #address-cells. We have to implement the old linux
-	 * trick of looking for the parent here as some device-trees rely on it
-	 */
-	old = of_node_get(ipar);
-	do {
-		tmp = of_get_property(old, "#address-cells", NULL);
-		tnode = of_get_parent(old);
-		of_node_put(old);
-		old = tnode;
-	} while(old && tmp == NULL);
-	of_node_put(old);
-	old = NULL;
-	addrsize = (tmp == NULL) ? 2 : *tmp;
-
-	DBG(" -> addrsize=%d\n", addrsize);
-
-	/* Now start the actual "proper" walk of the interrupt tree */
-	while (ipar != NULL) {
-		/* Now check if cursor is an interrupt-controller and if it is
-		 * then we are done
-		 */
-		if (of_get_property(ipar, "interrupt-controller", NULL) !=
-				NULL) {
-			DBG(" -> got it !\n");
-			memcpy(out_irq->specifier, intspec,
-			       intsize * sizeof(u32));
-			out_irq->size = intsize;
-			out_irq->controller = ipar;
-			of_node_put(old);
-			return 0;
-		}
-
-		/* Now look for an interrupt-map */
-		imap = of_get_property(ipar, "interrupt-map", &imaplen);
-		/* No interrupt map, check for an interrupt parent */
-		if (imap == NULL) {
-			DBG(" -> no map, getting parent\n");
-			newpar = of_irq_find_parent(ipar);
-			goto skiplevel;
-		}
-		imaplen /= sizeof(u32);
-
-		/* Look for a mask */
-		imask = of_get_property(ipar, "interrupt-map-mask", NULL);
-
-		/* If we were passed no "reg" property and we attempt to parse
-		 * an interrupt-map, then #address-cells must be 0.
-		 * Fail if it's not.
-		 */
-		if (addr == NULL && addrsize != 0) {
-			DBG(" -> no reg passed in when needed !\n");
-			goto fail;
-		}
-
-		/* Parse interrupt-map */
-		match = 0;
-		while (imaplen > (addrsize + intsize + 1) && !match) {
-			/* Compare specifiers */
-			match = 1;
-			for (i = 0; i < addrsize && match; ++i) {
-				u32 mask = imask ? imask[i] : 0xffffffffu;
-				match = ((addr[i] ^ imap[i]) & mask) == 0;
-			}
-			for (; i < (addrsize + intsize) && match; ++i) {
-				u32 mask = imask ? imask[i] : 0xffffffffu;
-				match =
-				   ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
-			}
-			imap += addrsize + intsize;
-			imaplen -= addrsize + intsize;
-
-			DBG(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
-			/* Get the interrupt parent */
-			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
-				newpar = of_node_get(of_irq_dflt_pic);
-			else
-				newpar = of_find_node_by_phandle((phandle)*imap);
-			imap++;
-			--imaplen;
-
-			/* Check if not found */
-			if (newpar == NULL) {
-				DBG(" -> imap parent not found !\n");
-				goto fail;
-			}
-
-			/* Get #interrupt-cells and #address-cells of new
-			 * parent
-			 */
-			tmp = of_get_property(newpar, "#interrupt-cells", NULL);
-			if (tmp == NULL) {
-				DBG(" -> parent lacks #interrupt-cells !\n");
-				goto fail;
-			}
-			newintsize = *tmp;
-			tmp = of_get_property(newpar, "#address-cells", NULL);
-			newaddrsize = (tmp == NULL) ? 0 : *tmp;
-
-			DBG(" -> newintsize=%d, newaddrsize=%d\n",
-			    newintsize, newaddrsize);
-
-			/* Check for malformed properties */
-			if (imaplen < (newaddrsize + newintsize))
-				goto fail;
-
-			imap += newaddrsize + newintsize;
-			imaplen -= newaddrsize + newintsize;
-
-			DBG(" -> imaplen=%d\n", imaplen);
-		}
-		if (!match)
-			goto fail;
-
-		of_node_put(old);
-		old = of_node_get(newpar);
-		addrsize = newaddrsize;
-		intsize = newintsize;
-		intspec = imap - intsize;
-		addr = intspec - addrsize;
-
-	skiplevel:
-		/* Iterate again with new parent */
-		DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
-		of_node_put(ipar);
-		ipar = newpar;
-		newpar = NULL;
-	}
- fail:
-	of_node_put(ipar);
-	of_node_put(old);
-	of_node_put(newpar);
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_raw);
-
-#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)
-static int of_irq_map_oldworld(struct device_node *device, int index,
-			       struct of_irq *out_irq)
-{
-	const u32 *ints = NULL;
-	int intlen;
-
-	/*
-	 * Old machines just have a list of interrupt numbers
-	 * and no interrupt-controller nodes. We also have dodgy
-	 * cases where the APPL,interrupts property is completely
-	 * missing behind pci-pci bridges and we have to get it
-	 * from the parent (the bridge itself, as apple just wired
-	 * everything together on these)
-	 */
-	while (device) {
-		ints = of_get_property(device, "AAPL,interrupts", &intlen);
-		if (ints != NULL)
-			break;
-		device = device->parent;
-		if (device && strcmp(device->type, "pci") != 0)
-			break;
-	}
-	if (ints == NULL)
-		return -EINVAL;
-	intlen /= sizeof(u32);
-
-	if (index >= intlen)
-		return -EINVAL;
-
-	out_irq->controller = NULL;
-	out_irq->specifier[0] = ints[index];
-	out_irq->size = 1;
-
-	return 0;
-}
-#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */
-static int of_irq_map_oldworld(struct device_node *device, int index,
-			       struct of_irq *out_irq)
-{
-	return -EINVAL;
-}
-#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */
-
-int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
-{
-	struct device_node *p;
-	const u32 *intspec, *tmp, *addr;
-	u32 intsize, intlen;
-	int res = -EINVAL;
-
-	DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
-
-	/* OldWorld mac stuff is "special", handle out of line */
-	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
-		return of_irq_map_oldworld(device, index, out_irq);
-
-	/* Get the interrupts property */
-	intspec = of_get_property(device, "interrupts", &intlen);
-	if (intspec == NULL)
-		return -EINVAL;
-	intlen /= sizeof(u32);
-
-	/* Get the reg property (if any) */
-	addr = of_get_property(device, "reg", NULL);
-
-	/* Look for the interrupt parent. */
-	p = of_irq_find_parent(device);
-	if (p == NULL)
-		return -EINVAL;
-
-	/* Get size of interrupt specifier */
-	tmp = of_get_property(p, "#interrupt-cells", NULL);
-	if (tmp == NULL)
-		goto out;
-	intsize = *tmp;
-
-	DBG(" intsize=%d intlen=%d\n", intsize, intlen);
-
-	/* Check index */
-	if ((index + 1) * intsize > intlen)
-		goto out;
-
-	/* Get new specifier and map it */
-	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
-			     addr, out_irq);
-out:
-	of_node_put(p);
-	return res;
-}
-EXPORT_SYMBOL_GPL(of_irq_map_one);
-
 /**
  * Search the device tree for the best MAC address to use.  'mac-address' is
  * checked first, because that is supposed to contain to "most recent" MAC
@@ -1051,29 +155,3 @@ const void *of_get_mac_address(struct device_node *np)
 	return NULL;
 }
 EXPORT_SYMBOL(of_get_mac_address);
-
-int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
-{
-	int irq = irq_of_parse_and_map(dev, index);
-
-	/* Only dereference the resource if both the
-	 * resource and the irq are valid. */
-	if (r && irq != NO_IRQ) {
-		r->start = r->end = irq;
-		r->flags = IORESOURCE_IRQ;
-	}
-
-	return irq;
-}
-EXPORT_SYMBOL_GPL(of_irq_to_resource);
-
-void __iomem *of_iomap(struct device_node *np, int index)
-{
-	struct resource res;
-
-	if (of_address_to_resource(np, index, &res))
-		return NULL;
-
-	return ioremap(res.start, 1 + res.end - res.start);
-}
-EXPORT_SYMBOL(of_iomap);
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 7a0c0199ea2..11f3cd9c832 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -32,6 +32,8 @@
 #ifdef CONFIG_PPC32
 #include <linux/module.h>
 #endif
+#include <linux/hw_breakpoint.h>
+#include <linux/perf_event.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -866,9 +868,34 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+void ptrace_triggered(struct perf_event *bp, int nmi,
+		      struct perf_sample_data *data, struct pt_regs *regs)
+{
+	struct perf_event_attr attr;
+
+	/*
+	 * Disable the breakpoint request here since ptrace has defined a
+	 * one-shot behaviour for breakpoint exceptions in PPC64.
+	 * The SIGTRAP signal is generated automatically for us in do_dabr().
+	 * We don't have to do anything about that here
+	 */
+	attr = bp->attr;
+	attr.disabled = true;
+	modify_user_hw_breakpoint(bp, &attr);
+}
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret;
+	struct thread_struct *thread = &(task->thread);
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+
 	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
 	 *  For embedded processors we support one DAC and no IAC's at the
 	 *  moment.
@@ -896,6 +923,43 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	bp = thread->ptrace_bps[0];
+	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
+		if (bp) {
+			unregister_hw_breakpoint(bp);
+			thread->ptrace_bps[0] = NULL;
+		}
+		return 0;
+	}
+	if (bp) {
+		attr = bp->attr;
+		attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+		arch_bp_generic_fields(data &
+					(DABR_DATA_WRITE | DABR_DATA_READ),
+							&attr.bp_type);
+		ret =  modify_user_hw_breakpoint(bp, &attr);
+		if (ret)
+			return ret;
+		thread->ptrace_bps[0] = bp;
+		thread->dabr = data;
+		return 0;
+	}
+
+	/* Create a new breakpoint request if one doesn't exist already */
+	hw_breakpoint_init(&attr);
+	attr.bp_addr = data & ~HW_BREAKPOINT_ALIGN;
+	arch_bp_generic_fields(data & (DABR_DATA_WRITE | DABR_DATA_READ),
+								&attr.bp_type);
+
+	thread->ptrace_bps[0] = bp = register_user_hw_breakpoint(&attr,
+							ptrace_triggered, task);
+	if (IS_ERR(bp)) {
+		thread->ptrace_bps[0] = NULL;
+		return PTR_ERR(bp);
+	}
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 	/* Move contents to the DABR register */
 	task->thread.dabr = data;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index d0516dbee76..41048de3c6c 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -47,14 +47,6 @@ struct rtas_t rtas = {
 };
 EXPORT_SYMBOL(rtas);
 
-struct rtas_suspend_me_data {
-	atomic_t working; /* number of cpus accessing this struct */
-	atomic_t done;
-	int token; /* ibm,suspend-me */
-	int error;
-	struct completion *complete; /* wait on this until working == 0 */
-};
-
 DEFINE_SPINLOCK(rtas_data_buf_lock);
 EXPORT_SYMBOL(rtas_data_buf_lock);
 
@@ -714,14 +706,53 @@ void rtas_os_term(char *str)
 
 static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
 #ifdef CONFIG_PPC_PSERIES
-static void rtas_percpu_suspend_me(void *info)
+static int __rtas_suspend_last_cpu(struct rtas_suspend_me_data *data, int wake_when_done)
+{
+	u16 slb_size = mmu_slb_size;
+	int rc = H_MULTI_THREADS_ACTIVE;
+	int cpu;
+
+	slb_set_size(SLB_MIN_SIZE);
+	printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n", smp_processor_id());
+
+	while (rc == H_MULTI_THREADS_ACTIVE && !atomic_read(&data->done) &&
+	       !atomic_read(&data->error))
+		rc = rtas_call(data->token, 0, 1, NULL);
+
+	if (rc || atomic_read(&data->error)) {
+		printk(KERN_DEBUG "ibm,suspend-me returned %d\n", rc);
+		slb_set_size(slb_size);
+	}
+
+	if (atomic_read(&data->error))
+		rc = atomic_read(&data->error);
+
+	atomic_set(&data->error, rc);
+
+	if (wake_when_done) {
+		atomic_set(&data->done, 1);
+
+		for_each_online_cpu(cpu)
+			plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+	}
+
+	if (atomic_dec_return(&data->working) == 0)
+		complete(data->complete);
+
+	return rc;
+}
+
+int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data)
+{
+	atomic_inc(&data->working);
+	return __rtas_suspend_last_cpu(data, 0);
+}
+
+static int __rtas_suspend_cpu(struct rtas_suspend_me_data *data, int wake_when_done)
 {
 	long rc = H_SUCCESS;
 	unsigned long msr_save;
-	u16 slb_size = mmu_slb_size;
 	int cpu;
-	struct rtas_suspend_me_data *data =
-		(struct rtas_suspend_me_data *)info;
 
 	atomic_inc(&data->working);
 
@@ -729,7 +760,7 @@ static void rtas_percpu_suspend_me(void *info)
 	msr_save = mfmsr();
 	mtmsr(msr_save & ~(MSR_EE));
 
-	while (rc == H_SUCCESS && !atomic_read(&data->done))
+	while (rc == H_SUCCESS && !atomic_read(&data->done) && !atomic_read(&data->error))
 		rc = plpar_hcall_norets(H_JOIN);
 
 	mtmsr(msr_save);
@@ -741,33 +772,37 @@ static void rtas_percpu_suspend_me(void *info)
 		/* All other cpus are in H_JOIN, this cpu does
 		 * the suspend.
 		 */
-		slb_set_size(SLB_MIN_SIZE);
-		printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
-		       smp_processor_id());
-		data->error = rtas_call(data->token, 0, 1, NULL);
-
-		if (data->error) {
-			printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
-			       data->error);
-			slb_set_size(slb_size);
-		}
+		return __rtas_suspend_last_cpu(data, wake_when_done);
 	} else {
 		printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
 		       smp_processor_id(), rc);
-		data->error = rc;
+		atomic_set(&data->error, rc);
 	}
 
-	atomic_set(&data->done, 1);
+	if (wake_when_done) {
+		atomic_set(&data->done, 1);
 
-	/* This cpu did the suspend or got an error; in either case,
-	 * we need to prod all other other cpus out of join state.
-	 * Extra prods are harmless.
-	 */
-	for_each_online_cpu(cpu)
-		plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+		/* This cpu did the suspend or got an error; in either case,
+		 * we need to prod all other other cpus out of join state.
+		 * Extra prods are harmless.
+		 */
+		for_each_online_cpu(cpu)
+			plpar_hcall_norets(H_PROD, get_hard_smp_processor_id(cpu));
+	}
 out:
 	if (atomic_dec_return(&data->working) == 0)
 		complete(data->complete);
+	return rc;
+}
+
+int rtas_suspend_cpu(struct rtas_suspend_me_data *data)
+{
+	return __rtas_suspend_cpu(data, 0);
+}
+
+static void rtas_percpu_suspend_me(void *info)
+{
+	__rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1);
 }
 
 static int rtas_ibm_suspend_me(struct rtas_args *args)
@@ -802,22 +837,22 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 
 	atomic_set(&data.working, 0);
 	atomic_set(&data.done, 0);
+	atomic_set(&data.error, 0);
 	data.token = rtas_token("ibm,suspend-me");
-	data.error = 0;
 	data.complete = &done;
 
 	/* Call function on all CPUs.  One of us will make the
 	 * rtas call
 	 */
 	if (on_each_cpu(rtas_percpu_suspend_me, &data, 0))
-		data.error = -EINVAL;
+		atomic_set(&data.error, -EINVAL);
 
 	wait_for_completion(&done);
 
-	if (data.error != 0)
+	if (atomic_read(&data.error) != 0)
 		printk(KERN_ERR "Error doing global join\n");
 
-	return data.error;
+	return atomic_read(&data.error);
 }
 #else /* CONFIG_PPC_PSERIES */
 static int rtas_ibm_suspend_me(struct rtas_args *args)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index b7e6c7e193a..9d4882a4664 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -94,6 +94,12 @@ struct screen_info screen_info = {
 	.orig_video_points = 16
 };
 
+/* Variables required to store legacy IO irq routing */
+int of_i8042_kbd_irq;
+EXPORT_SYMBOL_GPL(of_i8042_kbd_irq);
+int of_i8042_aux_irq;
+EXPORT_SYMBOL_GPL(of_i8042_aux_irq);
+
 #ifdef __DO_IRQ_CANON
 /* XXX should go elsewhere eventually */
 int ppc_do_canonicalize_irqs;
@@ -575,6 +581,15 @@ int check_legacy_ioport(unsigned long base_port)
 			np = of_find_compatible_node(NULL, NULL, "pnpPNP,f03");
 		if (np) {
 			parent = of_get_parent(np);
+
+			of_i8042_kbd_irq = irq_of_parse_and_map(parent, 0);
+			if (!of_i8042_kbd_irq)
+				of_i8042_kbd_irq = 1;
+
+			of_i8042_aux_irq = irq_of_parse_and_map(parent, 1);
+			if (!of_i8042_aux_irq)
+				of_i8042_aux_irq = 12;
+
 			of_node_put(np);
 			np = parent;
 			break;
@@ -701,16 +716,9 @@ static struct notifier_block ppc_dflt_plat_bus_notifier = {
 	.priority = INT_MAX,
 };
 
-static struct notifier_block ppc_dflt_of_bus_notifier = {
-	.notifier_call = ppc_dflt_bus_notify,
-	.priority = INT_MAX,
-};
-
 static int __init setup_bus_notifier(void)
 {
 	bus_register_notifier(&platform_bus_type, &ppc_dflt_plat_bus_notifier);
-	bus_register_notifier(&of_platform_bus_type, &ppc_dflt_of_bus_notifier);
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index d135f93cb0f..1bee4b68fa4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -142,16 +142,6 @@ early_param("smt-enabled", early_smt_enabled);
 #define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
-/* Put the paca pointer into r13 and SPRG_PACA */
-static void __init setup_paca(struct paca_struct *new_paca)
-{
-	local_paca = new_paca;
-	mtspr(SPRN_SPRG_PACA, local_paca);
-#ifdef CONFIG_PPC_BOOK3E
-	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
-#endif
-}
-
 /*
  * Early initialization entry point. This is called by head.S
  * with MMU translation disabled. We rely on the "feature" of
@@ -600,6 +590,9 @@ static int pcpu_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+
 void __init setup_per_cpu_areas(void)
 {
 	const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
@@ -624,8 +617,10 @@ void __init setup_per_cpu_areas(void)
 		panic("cannot initialize percpu area (err=%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
-	for_each_possible_cpu(cpu)
-		paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu];
+	for_each_possible_cpu(cpu) {
+                __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+		paca[cpu].data_offset = __per_cpu_offset[cpu];
+	}
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index a0afb555a7c..7109f5b1baa 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -11,6 +11,7 @@
 
 #include <linux/tracehook.h>
 #include <linux/signal.h>
+#include <asm/hw_breakpoint.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 
@@ -149,6 +150,8 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 	if (current->thread.dabr)
 		set_dabr(current->thread.dabr);
 #endif
+	/* Re-enable the breakpoints for the signal stack */
+	thread_change_pc(current, regs);
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 5c196d1086d..a61b3ddd7bb 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -288,8 +288,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 			max_cpus = NR_CPUS;
 	else
 		max_cpus = 1;
- 
-	smp_space_timers(max_cpus);
 
 	for_each_possible_cpu(cpu)
 		if (cpu != boot_cpuid)
@@ -501,14 +499,6 @@ int __devinit start_secondary(void *unused)
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-#endif
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
 	cpu_callin_map[cpu] = 1;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 0441bbdadbd..ce53dfa7130 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -149,16 +149,6 @@ unsigned long tb_ticks_per_usec = 100; /* sane default */
 EXPORT_SYMBOL(tb_ticks_per_usec);
 unsigned long tb_ticks_per_sec;
 EXPORT_SYMBOL(tb_ticks_per_sec);	/* for cputime_t conversions */
-u64 tb_to_xs;
-unsigned tb_to_us;
-
-#define TICKLEN_SCALE	NTP_SCALE_SHIFT
-static u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
-static u64 ticklen_to_xs;	/* 0.64 fraction */
-
-/* If last_tick_len corresponds to about 1/HZ seconds, then
-   last_tick_len << TICKLEN_SHIFT will be about 2^63. */
-#define TICKLEN_SHIFT	(63 - 30 - TICKLEN_SCALE + SHIFT_HZ)
 
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL_GPL(rtc_lock);
@@ -174,7 +164,6 @@ unsigned long ppc_proc_freq;
 EXPORT_SYMBOL(ppc_proc_freq);
 unsigned long ppc_tb_freq;
 
-static u64 tb_last_jiffy __cacheline_aligned_in_smp;
 static DEFINE_PER_CPU(u64, last_jiffy);
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
@@ -423,30 +412,6 @@ void udelay(unsigned long usecs)
 }
 EXPORT_SYMBOL(udelay);
 
-static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
-			       u64 new_tb_to_xs)
-{
-	/*
-	 * tb_update_count is used to allow the userspace gettimeofday code
-	 * to assure itself that it sees a consistent view of the tb_to_xs and
-	 * stamp_xsec variables.  It reads the tb_update_count, then reads
-	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
-	 * the two values of tb_update_count match and are even then the
-	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
-	 * loops back and reads them again until this criteria is met.
-	 * We expect the caller to have done the first increment of
-	 * vdso_data->tb_update_count already.
-	 */
-	vdso_data->tb_orig_stamp = new_tb_stamp;
-	vdso_data->stamp_xsec = new_stamp_xsec;
-	vdso_data->tb_to_xs = new_tb_to_xs;
-	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
-	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
-	vdso_data->stamp_xtime = xtime;
-	smp_wmb();
-	++(vdso_data->tb_update_count);
-}
-
 #ifdef CONFIG_SMP
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -470,7 +435,6 @@ EXPORT_SYMBOL(profile_pc);
 
 static int __init iSeries_tb_recal(void)
 {
-	struct div_result divres;
 	unsigned long titan, tb;
 
 	/* Make sure we only run on iSeries */
@@ -501,10 +465,7 @@ static int __init iSeries_tb_recal(void)
 				tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
 				tb_ticks_per_sec   = new_tb_ticks_per_sec;
 				calc_cputime_factors();
-				div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
-				tb_to_xs = divres.result_low;
 				vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
-				vdso_data->tb_to_xs = tb_to_xs;
 				setup_cputime_one_jiffy();
 			}
 			else {
@@ -667,27 +628,9 @@ void timer_interrupt(struct pt_regs * regs)
 	trace_timer_interrupt_exit(regs);
 }
 
-void wakeup_decrementer(void)
-{
-	unsigned long ticks;
-
-	/*
-	 * The timebase gets saved on sleep and restored on wakeup,
-	 * so all we need to do is to reset the decrementer.
-	 */
-	ticks = tb_ticks_since(__get_cpu_var(last_jiffy));
-	if (ticks < tb_ticks_per_jiffy)
-		ticks = tb_ticks_per_jiffy - ticks;
-	else
-		ticks = 1;
-	set_dec(ticks);
-}
-
 #ifdef CONFIG_SUSPEND
-void generic_suspend_disable_irqs(void)
+static void generic_suspend_disable_irqs(void)
 {
-	preempt_disable();
-
 	/* Disable the decrementer, so that it doesn't interfere
 	 * with suspending.
 	 */
@@ -697,12 +640,9 @@ void generic_suspend_disable_irqs(void)
 	set_dec(0x7fffffff);
 }
 
-void generic_suspend_enable_irqs(void)
+static void generic_suspend_enable_irqs(void)
 {
-	wakeup_decrementer();
-
 	local_irq_enable();
-	preempt_enable();
 }
 
 /* Overrides the weak version in kernel/power/main.c */
@@ -722,23 +662,6 @@ void arch_suspend_enable_irqs(void)
 }
 #endif
 
-#ifdef CONFIG_SMP
-void __init smp_space_timers(unsigned int max_cpus)
-{
-	int i;
-	u64 previous_tb = per_cpu(last_jiffy, boot_cpuid);
-
-	/* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */
-	previous_tb -= tb_ticks_per_jiffy;
-
-	for_each_possible_cpu(i) {
-		if (i == boot_cpuid)
-			continue;
-		per_cpu(last_jiffy, i) = previous_tb;
-	}
-}
-#endif
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  *
@@ -873,10 +796,11 @@ static cycle_t timebase_read(struct clocksource *cs)
 	return (cycle_t)get_tb();
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
-		     u32 mult)
+void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
+			struct clocksource *clock, u32 mult)
 {
-	u64 t2x, stamp_xsec;
+	u64 new_tb_to_xs, new_stamp_xsec;
+	u32 frac_sec;
 
 	if (clock != &clocksource_timebase)
 		return;
@@ -887,11 +811,35 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 
 	/* XXX this assumes clock->shift == 22 */
 	/* 4611686018 ~= 2^(20+64-22) / 1e9 */
-	t2x = (u64) mult * 4611686018ULL;
-	stamp_xsec = (u64) xtime.tv_nsec * XSEC_PER_SEC;
-	do_div(stamp_xsec, 1000000000);
-	stamp_xsec += (u64) xtime.tv_sec * XSEC_PER_SEC;
-	update_gtod(clock->cycle_last, stamp_xsec, t2x);
+	new_tb_to_xs = (u64) mult * 4611686018ULL;
+	new_stamp_xsec = (u64) wall_time->tv_nsec * XSEC_PER_SEC;
+	do_div(new_stamp_xsec, 1000000000);
+	new_stamp_xsec += (u64) wall_time->tv_sec * XSEC_PER_SEC;
+
+	BUG_ON(wall_time->tv_nsec >= NSEC_PER_SEC);
+	/* this is tv_nsec / 1e9 as a 0.32 fraction */
+	frac_sec = ((u64) wall_time->tv_nsec * 18446744073ULL) >> 32;
+
+	/*
+	 * tb_update_count is used to allow the userspace gettimeofday code
+	 * to assure itself that it sees a consistent view of the tb_to_xs and
+	 * stamp_xsec variables.  It reads the tb_update_count, then reads
+	 * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
+	 * the two values of tb_update_count match and are even then the
+	 * tb_to_xs and stamp_xsec values are consistent.  If not, then it
+	 * loops back and reads them again until this criteria is met.
+	 * We expect the caller to have done the first increment of
+	 * vdso_data->tb_update_count already.
+	 */
+	vdso_data->tb_orig_stamp = clock->cycle_last;
+	vdso_data->stamp_xsec = new_stamp_xsec;
+	vdso_data->tb_to_xs = new_tb_to_xs;
+	vdso_data->wtom_clock_sec = wtm->tv_sec;
+	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
+	vdso_data->stamp_xtime = *wall_time;
+	vdso_data->stamp_sec_fraction = frac_sec;
+	smp_wmb();
+	++(vdso_data->tb_update_count);
 }
 
 void update_vsyscall_tz(void)
@@ -1007,15 +955,13 @@ void secondary_cpu_time_init(void)
 /* This function is only called on the boot processor */
 void __init time_init(void)
 {
-	unsigned long flags;
 	struct div_result res;
-	u64 scale, x;
+	u64 scale;
 	unsigned shift;
 
 	if (__USE_RTC()) {
 		/* 601 processor: dec counts down by 128 every 128ns */
 		ppc_tb_freq = 1000000000;
-		tb_last_jiffy = get_rtcl();
 	} else {
 		/* Normal PowerPC with timebase register */
 		ppc_md.calibrate_decr();
@@ -1023,50 +969,15 @@ void __init time_init(void)
 		       ppc_tb_freq / 1000000, ppc_tb_freq % 1000000);
 		printk(KERN_DEBUG "time_init: processor frequency   = %lu.%.6lu MHz\n",
 		       ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
-		tb_last_jiffy = get_tb();
 	}
 
 	tb_ticks_per_jiffy = ppc_tb_freq / HZ;
 	tb_ticks_per_sec = ppc_tb_freq;
 	tb_ticks_per_usec = ppc_tb_freq / 1000000;
-	tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
 	calc_cputime_factors();
 	setup_cputime_one_jiffy();
 
 	/*
-	 * Calculate the length of each tick in ns.  It will not be
-	 * exactly 1e9/HZ unless ppc_tb_freq is divisible by HZ.
-	 * We compute 1e9 * tb_ticks_per_jiffy / ppc_tb_freq,
-	 * rounded up.
-	 */
-	x = (u64) NSEC_PER_SEC * tb_ticks_per_jiffy + ppc_tb_freq - 1;
-	do_div(x, ppc_tb_freq);
-	tick_nsec = x;
-	last_tick_len = x << TICKLEN_SCALE;
-
-	/*
-	 * Compute ticklen_to_xs, which is a factor which gets multiplied
-	 * by (last_tick_len << TICKLEN_SHIFT) to get a tb_to_xs value.
-	 * It is computed as:
-	 * ticklen_to_xs = 2^N / (tb_ticks_per_jiffy * 1e9)
-	 * where N = 64 + 20 - TICKLEN_SCALE - TICKLEN_SHIFT
-	 * which turns out to be N = 51 - SHIFT_HZ.
-	 * This gives the result as a 0.64 fixed-point fraction.
-	 * That value is reduced by an offset amounting to 1 xsec per
-	 * 2^31 timebase ticks to avoid problems with time going backwards
-	 * by 1 xsec when we do timer_recalc_offset due to losing the
-	 * fractional xsec.  That offset is equal to ppc_tb_freq/2^51
-	 * since there are 2^20 xsec in a second.
-	 */
-	div128_by_32((1ULL << 51) - ppc_tb_freq, 0,
-		     tb_ticks_per_jiffy << SHIFT_HZ, &res);
-	div128_by_32(res.result_high, res.result_low, NSEC_PER_SEC, &res);
-	ticklen_to_xs = res.result_low;
-
-	/* Compute tb_to_xs from tick_nsec */
-	tb_to_xs = mulhdu(last_tick_len << TICKLEN_SHIFT, ticklen_to_xs);
-
-	/*
 	 * Compute scale factor for sched_clock.
 	 * The calibrate_decr() function has set tb_ticks_per_sec,
 	 * which is the timebase frequency.
@@ -1087,21 +998,14 @@ void __init time_init(void)
 	/* Save the current timebase to pretty up CONFIG_PRINTK_TIME */
 	boot_tb = get_tb_or_rtc();
 
-	write_seqlock_irqsave(&xtime_lock, flags);
-
 	/* If platform provided a timezone (pmac), we correct the time */
         if (timezone_offset) {
 		sys_tz.tz_minuteswest = -timezone_offset / 60;
 		sys_tz.tz_dsttime = 0;
         }
 
-	vdso_data->tb_orig_stamp = tb_last_jiffy;
 	vdso_data->tb_update_count = 0;
 	vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
-	vdso_data->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
-	vdso_data->tb_to_xs = tb_to_xs;
-
-	write_sequnlock_irqrestore(&xtime_lock, flags);
 
 	/* Start the decrementer on CPUs that have manual control
 	 * such as BookE
@@ -1195,39 +1099,6 @@ void to_tm(int tim, struct rtc_time * tm)
 	GregorianDay(tm);
 }
 
-/* Auxiliary function to compute scaling factors */
-/* Actually the choice of a timebase running at 1/4 the of the bus
- * frequency giving resolution of a few tens of nanoseconds is quite nice.
- * It makes this computation very precise (27-28 bits typically) which
- * is optimistic considering the stability of most processor clock
- * oscillators and the precision with which the timebase frequency
- * is measured but does not harm.
- */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale)
-{
-        unsigned mlt=0, tmp, err;
-        /* No concern for performance, it's done once: use a stupid
-         * but safe and compact method to find the multiplier.
-         */
-  
-        for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
-                if (mulhwu(inscale, mlt|tmp) < outscale)
-			mlt |= tmp;
-        }
-  
-        /* We might still be off by 1 for the best approximation.
-         * A side effect of this is that if outscale is too large
-         * the returned value will be zero.
-         * Many corner cases have been checked and seem to work,
-         * some might have been forgotten in the test however.
-         */
-  
-        err = inscale * (mlt+1);
-        if (err <= inscale/2)
-		mlt++;
-        return mlt;
-}
-
 /*
  * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
  * result.
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 25fc33984c2..a45a63c3a0c 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -55,9 +55,6 @@
 #endif
 #include <asm/kexec.h>
 #include <asm/ppc-opcode.h>
-#ifdef CONFIG_FSL_BOOKE
-#include <asm/dbell.h>
-#endif
 
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
 int (*__debugger)(struct pt_regs *regs) __read_mostly;
@@ -688,7 +685,7 @@ void RunModeException(struct pt_regs *regs)
 
 void __kprobes single_step_exception(struct pt_regs *regs)
 {
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
+	clear_single_step(regs);
 
 	if (notify_die(DIE_SSTEP, "single_step", regs, 5,
 					5, SIGTRAP) == NOTIFY_STOP)
@@ -707,10 +704,8 @@ void __kprobes single_step_exception(struct pt_regs *regs)
  */
 static void emulate_single_step(struct pt_regs *regs)
 {
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
+	if (single_stepping(regs))
+		single_step_exception(regs);
 }
 
 static inline int __parse_fpscr(unsigned long fpscr)
@@ -1344,24 +1339,6 @@ void vsx_assist_exception(struct pt_regs *regs)
 #endif /* CONFIG_VSX */
 
 #ifdef CONFIG_FSL_BOOKE
-
-void doorbell_exception(struct pt_regs *regs)
-{
-#ifdef CONFIG_SMP
-	int cpu = smp_processor_id();
-	int msg;
-
-	if (num_online_cpus() < 2)
-		return;
-
-	for (msg = 0; msg < 4; msg++)
-		if (test_and_clear_bit(msg, &dbell_smp_message[cpu]))
-			smp_message_recv(msg);
-#else
-	printk(KERN_WARNING "Received doorbell on non-smp system\n");
-#endif
-}
-
 void CacheLockingException(struct pt_regs *regs, unsigned long address,
 			   unsigned long error_code)
 {
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index ee038d4bf25..4ee09ee2e83 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -19,8 +19,10 @@
 /* Offset for the low 32-bit part of a field of long type */
 #ifdef CONFIG_PPC64
 #define LOPART	4
+#define TSPEC_TV_SEC	TSPC64_TV_SEC+LOPART
 #else
 #define LOPART	0
+#define TSPEC_TV_SEC	TSPC32_TV_SEC
 #endif
 
 	.text
@@ -41,23 +43,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	mr	r9, r3			/* datapage ptr in r9 */
 	cmplwi	r10,0			/* check if tv is NULL */
 	beq	3f
-	bl	__do_get_xsec@local	/* get xsec from tb & kernel */
-	bne-	2f			/* out of line -> do syscall */
-
-	/* seconds are xsec >> 20 */
-	rlwinm	r5,r4,12,20,31
-	rlwimi	r5,r3,12,0,19
-	stw	r5,TVAL32_TV_SEC(r10)
-
-	/* get remaining xsec and convert to usec. we scale
-	 * up remaining xsec by 12 bits and get the top 32 bits
-	 * of the multiplication
-	 */
-	rlwinm	r5,r4,12,0,19
-	lis	r6,1000000@h
-	ori	r6,r6,1000000@l
-	mulhwu	r5,r5,r6
-	stw	r5,TVAL32_TV_USEC(r10)
+	lis	r7,1000000@ha		/* load up USEC_PER_SEC */
+	addi	r7,r7,1000000@l		/* so we get microseconds in r4 */
+	bl	__do_get_tspec@local	/* get sec/usec from tb & kernel */
+	stw	r3,TVAL32_TV_SEC(r10)
+	stw	r4,TVAL32_TV_USEC(r10)
 
 3:	cmplwi	r11,0			/* check if tz is NULL */
 	beq	1f
@@ -70,14 +60,6 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	crclr	cr0*4+so
 	li	r3,0
 	blr
-
-2:
-	mtlr	r12
-	mr	r3,r10
-	mr	r4,r11
-	li	r0,__NR_gettimeofday
-	sc
-	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_gettimeofday)
 
@@ -100,7 +82,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	mr	r11,r4			/* r11 saves tp */
 	bl	__get_datapage@local	/* get data page */
 	mr	r9,r3			/* datapage ptr in r9 */
-
+	lis	r7,NSEC_PER_SEC@h	/* want nanoseconds */
+	ori	r7,r7,NSEC_PER_SEC@l
 50:	bl	__do_get_tspec@local	/* get sec/nsec from tb & kernel */
 	bne	cr1,80f			/* not monotonic -> all done */
 
@@ -198,83 +181,12 @@ V_FUNCTION_END(__kernel_clock_getres)
 
 
 /*
- * This is the core of gettimeofday() & friends, it returns the xsec
- * value in r3 & r4 and expects the datapage ptr (non clobbered)
- * in r9. clobbers r0,r4,r5,r6,r7,r8.
- * When returning, r8 contains the counter value that can be reused
- * by the monotonic clock implementation
- */
-__do_get_xsec:
-  .cfi_startproc
-	/* Check for update count & load values. We use the low
-	 * order 32 bits of the update count
-	 */
-1:	lwz	r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
-	andi.	r0,r8,1			/* pending update ? loop */
-	bne-	1b
-	xor	r0,r8,r8		/* create dependency */
-	add	r9,r9,r0
-
-	/* Load orig stamp (offset to TB) */
-	lwz	r5,CFG_TB_ORIG_STAMP(r9)
-	lwz	r6,(CFG_TB_ORIG_STAMP+4)(r9)
-
-	/* Get a stable TB value */
-2:	mftbu	r3
-	mftbl	r4
-	mftbu	r0
-	cmpl	cr0,r3,r0
-	bne-	2b
-
-	/* Substract tb orig stamp. If the high part is non-zero, we jump to
-	 * the slow path which call the syscall.
-	 * If it's ok, then we have our 32 bits tb_ticks value in r7
-	 */
-	subfc	r7,r6,r4
-	subfe.	r0,r5,r3
-	bne-	3f
-
-	/* Load scale factor & do multiplication */
-	lwz	r5,CFG_TB_TO_XS(r9)	/* load values */
-	lwz	r6,(CFG_TB_TO_XS+4)(r9)
-	mulhwu	r4,r7,r5
-	mulhwu	r6,r7,r6
-	mullw	r0,r7,r5
-	addc	r6,r6,r0
-
-	/* At this point, we have the scaled xsec value in r4 + XER:CA
-	 * we load & add the stamp since epoch
-	 */
-	lwz	r5,CFG_STAMP_XSEC(r9)
-	lwz	r6,(CFG_STAMP_XSEC+4)(r9)
-	adde	r4,r4,r6
-	addze	r3,r5
-
-	/* We now have our result in r3,r4. We create a fake dependency
-	 * on that result and re-check the counter
-	 */
-	or	r6,r4,r3
-	xor	r0,r6,r6
-	add	r9,r9,r0
-	lwz	r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
-        cmpl    cr0,r8,r0		/* check if updated */
-	bne-	1b
-
-	/* Warning ! The caller expects CR:EQ to be set to indicate a
-	 * successful calculation (so it won't fallback to the syscall
-	 * method). We have overriden that CR bit in the counter check,
-	 * but fortunately, the loop exit condition _is_ CR:EQ set, so
-	 * we can exit safely here. If you change this code, be careful
-	 * of that side effect.
-	 */
-3:	blr
-  .cfi_endproc
-
-/*
- * This is the core of clock_gettime(), it returns the current
- * time in seconds and nanoseconds in r3 and r4.
+ * This is the core of clock_gettime() and gettimeofday(),
+ * it returns the current time in r3 (seconds) and r4.
+ * On entry, r7 gives the resolution of r4, either USEC_PER_SEC
+ * or NSEC_PER_SEC, giving r4 in microseconds or nanoseconds.
  * It expects the datapage ptr in r9 and doesn't clobber it.
- * It clobbers r0, r5, r6, r10 and returns NSEC_PER_SEC in r7.
+ * It clobbers r0, r5 and r6.
  * On return, r8 contains the counter value that can be reused.
  * This clobbers cr0 but not any other cr field.
  */
@@ -297,70 +209,58 @@ __do_get_tspec:
 2:	mftbu	r3
 	mftbl	r4
 	mftbu	r0
-	cmpl	cr0,r3,r0
+	cmplw	cr0,r3,r0
 	bne-	2b
 
 	/* Subtract tb orig stamp and shift left 12 bits.
 	 */
-	subfc	r7,r6,r4
+	subfc	r4,r6,r4
 	subfe	r0,r5,r3
 	slwi	r0,r0,12
-	rlwimi.	r0,r7,12,20,31
-	slwi	r7,r7,12
+	rlwimi.	r0,r4,12,20,31
+	slwi	r4,r4,12
 
-	/* Load scale factor & do multiplication */
+	/*
+	 * Load scale factor & do multiplication.
+	 * We only use the high 32 bits of the tb_to_xs value.
+	 * Even with a 1GHz timebase clock, the high 32 bits of
+	 * tb_to_xs will be at least 4 million, so the error from
+	 * ignoring the low 32 bits will be no more than 0.25ppm.
+	 * The error will just make the clock run very very slightly
+	 * slow until the next time the kernel updates the VDSO data,
+	 * at which point the clock will catch up to the kernel's value,
+	 * so there is no long-term error accumulation.
+	 */
 	lwz	r5,CFG_TB_TO_XS(r9)	/* load values */
-	lwz	r6,(CFG_TB_TO_XS+4)(r9)
-	mulhwu	r3,r7,r6
-	mullw	r10,r7,r5
-	mulhwu	r4,r7,r5
-	addc	r10,r3,r10
+	mulhwu	r4,r4,r5
 	li	r3,0
 
 	beq+	4f			/* skip high part computation if 0 */
 	mulhwu	r3,r0,r5
-	mullw	r7,r0,r5
-	mulhwu	r5,r0,r6
-	mullw	r6,r0,r6
-	adde	r4,r4,r7
-	addze	r3,r3
+	mullw	r5,r0,r5
 	addc	r4,r4,r5
 	addze	r3,r3
-	addc	r10,r10,r6
-
-4:	addze	r4,r4			/* add in carry */
-	lis	r7,NSEC_PER_SEC@h
-	ori	r7,r7,NSEC_PER_SEC@l
-	mulhwu	r4,r4,r7		/* convert to nanoseconds */
-
-	/* At this point, we have seconds & nanoseconds since the xtime
-	 * stamp in r3+CA and r4.  Load & add the xtime stamp.
+4:
+	/* At this point, we have seconds since the xtime stamp
+	 * as a 32.32 fixed-point number in r3 and r4.
+	 * Load & add the xtime stamp.
 	 */
-#ifdef CONFIG_PPC64
-	lwz	r5,STAMP_XTIME+TSPC64_TV_SEC+LOPART(r9)
-	lwz	r6,STAMP_XTIME+TSPC64_TV_NSEC+LOPART(r9)
-#else
-	lwz	r5,STAMP_XTIME+TSPC32_TV_SEC(r9)
-	lwz	r6,STAMP_XTIME+TSPC32_TV_NSEC(r9)
-#endif
-	add	r4,r4,r6
+	lwz	r5,STAMP_XTIME+TSPEC_TV_SEC(r9)
+	lwz	r6,STAMP_SEC_FRAC(r9)
+	addc	r4,r4,r6
 	adde	r3,r3,r5
 
-	/* We now have our result in r3,r4. We create a fake dependency
-	 * on that result and re-check the counter
+	/* We create a fake dependency on the result in r3/r4
+	 * and re-check the counter
 	 */
 	or	r6,r4,r3
 	xor	r0,r6,r6
 	add	r9,r9,r0
 	lwz	r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
-        cmpl    cr0,r8,r0		/* check if updated */
+        cmplw	cr0,r8,r0		/* check if updated */
 	bne-	1b
 
-	/* check for nanosecond overflow and adjust if necessary */
-	cmpw	r4,r7
-	bltlr				/* all done if no overflow */
-	subf	r4,r7,r4		/* adjust if overflow */
-	addi	r3,r3,1
+	mulhwu	r4,r4,r7		/* convert to micro or nanoseconds */
 
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index 262cd5857a5..e97a9a0dc4a 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -33,18 +33,11 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	bl	V_LOCAL_FUNC(__get_datapage)	/* get data page */
 	cmpldi	r11,0			/* check if tv is NULL */
 	beq	2f
-	bl	V_LOCAL_FUNC(__do_get_xsec)	/* get xsec from tb & kernel */
-	lis     r7,15			/* r7 = 1000000 = USEC_PER_SEC */
-	ori     r7,r7,16960
-	rldicl  r5,r4,44,20		/* r5 = sec = xsec / XSEC_PER_SEC */
-	rldicr  r6,r5,20,43		/* r6 = sec * XSEC_PER_SEC */
-	std	r5,TVAL64_TV_SEC(r11)	/* store sec in tv */
-	subf	r0,r6,r4		/* r0 = xsec = (xsec - r6) */
-	mulld   r0,r0,r7		/* usec = (xsec * USEC_PER_SEC) /
-					 * XSEC_PER_SEC
-					 */
-	rldicl  r0,r0,44,20
-	std	r0,TVAL64_TV_USEC(r11)	/* store usec in tv */
+	lis	r7,1000000@ha		/* load up USEC_PER_SEC */
+	addi	r7,r7,1000000@l
+	bl	V_LOCAL_FUNC(__do_get_tspec) /* get sec/us from tb & kernel */
+	std	r4,TVAL64_TV_SEC(r11)	/* store sec in tv */
+	std	r5,TVAL64_TV_USEC(r11)	/* store usec in tv */
 2:	cmpldi	r10,0			/* check if tz is NULL */
 	beq	1f
 	lwz	r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */
@@ -77,6 +70,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
   .cfi_register lr,r12
 	mr	r11,r4			/* r11 saves tp */
 	bl	V_LOCAL_FUNC(__get_datapage)	/* get data page */
+	lis	r7,NSEC_PER_SEC@h	/* want nanoseconds */
+	ori	r7,r7,NSEC_PER_SEC@l
 50:	bl	V_LOCAL_FUNC(__do_get_tspec)	/* get time from tb & kernel */
 	bne	cr1,80f			/* if not monotonic, all done */
 
@@ -171,49 +166,12 @@ V_FUNCTION_END(__kernel_clock_getres)
 
 
 /*
- * This is the core of gettimeofday(), it returns the xsec
- * value in r4 and expects the datapage ptr (non clobbered)
- * in r3. clobbers r0,r4,r5,r6,r7,r8
- * When returning, r8 contains the counter value that can be reused
- */
-V_FUNCTION_BEGIN(__do_get_xsec)
-  .cfi_startproc
-	/* check for update count & load values */
-1:	ld	r8,CFG_TB_UPDATE_COUNT(r3)
-	andi.	r0,r8,1			/* pending update ? loop */
-	bne-	1b
-	xor	r0,r8,r8		/* create dependency */
-	add	r3,r3,r0
-
-	/* Get TB & offset it. We use the MFTB macro which will generate
-	 * workaround code for Cell.
-	 */
-	MFTB(r7)
-	ld	r9,CFG_TB_ORIG_STAMP(r3)
-	subf	r7,r9,r7
-
-	/* Scale result */
-	ld	r5,CFG_TB_TO_XS(r3)
-	mulhdu	r7,r7,r5
-
-	/* Add stamp since epoch */
-	ld	r6,CFG_STAMP_XSEC(r3)
-	add	r4,r6,r7
-
-	xor	r0,r4,r4
-	add	r3,r3,r0
-	ld	r0,CFG_TB_UPDATE_COUNT(r3)
-        cmpld   cr0,r0,r8		/* check if updated */
-	bne-	1b
-	blr
-  .cfi_endproc
-V_FUNCTION_END(__do_get_xsec)
-
-/*
- * This is the core of clock_gettime(), it returns the current
- * time in seconds and nanoseconds in r4 and r5.
+ * This is the core of clock_gettime() and gettimeofday(),
+ * it returns the current time in r4 (seconds) and r5.
+ * On entry, r7 gives the resolution of r5, either USEC_PER_SEC
+ * or NSEC_PER_SEC, giving r5 in microseconds or nanoseconds.
  * It expects the datapage ptr in r3 and doesn't clobber it.
- * It clobbers r0 and r6 and returns NSEC_PER_SEC in r7.
+ * It clobbers r0, r6 and r9.
  * On return, r8 contains the counter value that can be reused.
  * This clobbers cr0 but not any other cr field.
  */
@@ -229,18 +187,18 @@ V_FUNCTION_BEGIN(__do_get_tspec)
 	/* Get TB & offset it. We use the MFTB macro which will generate
 	 * workaround code for Cell.
 	 */
-	MFTB(r7)
+	MFTB(r6)
 	ld	r9,CFG_TB_ORIG_STAMP(r3)
-	subf	r7,r9,r7
+	subf	r6,r9,r6
 
 	/* Scale result */
 	ld	r5,CFG_TB_TO_XS(r3)
-	sldi	r7,r7,12		/* compute time since stamp_xtime */
-	mulhdu	r6,r7,r5		/* in units of 2^-32 seconds */
+	sldi	r6,r6,12		/* compute time since stamp_xtime */
+	mulhdu	r6,r6,r5		/* in units of 2^-32 seconds */
 
 	/* Add stamp since epoch */
 	ld	r4,STAMP_XTIME+TSPC64_TV_SEC(r3)
-	ld	r5,STAMP_XTIME+TSPC64_TV_NSEC(r3)
+	lwz	r5,STAMP_SEC_FRAC(r3)
 	or	r0,r4,r5
 	or	r0,r0,r6
 	xor	r0,r0,r0
@@ -250,17 +208,11 @@ V_FUNCTION_BEGIN(__do_get_tspec)
 	bne-	1b			/* reload if so */
 
 	/* convert to seconds & nanoseconds and add to stamp */
-	lis	r7,NSEC_PER_SEC@h
-	ori	r7,r7,NSEC_PER_SEC@l
-	mulhwu	r0,r6,r7		/* compute nanoseconds and */
+	add	r6,r6,r5		/* add on fractional seconds of xtime */
+	mulhwu	r5,r6,r7		/* compute micro or nanoseconds and */
 	srdi	r6,r6,32		/* seconds since stamp_xtime */
-	clrldi	r0,r0,32
-	add	r5,r5,r0		/* add nanoseconds together */
-	cmpd	r5,r7			/* overflow? */
+	clrldi	r5,r5,32
 	add	r4,r4,r6
-	bltlr				/* all done if no overflow */
-	subf	r5,r7,r5		/* if overflow, adjust */
-	addi	r4,r4,1
 	blr
   .cfi_endproc
 V_FUNCTION_END(__do_get_tspec)
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 70378551c0c..46fa04f12a9 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -182,7 +182,7 @@ static ssize_t kvmppc_exit_timing_write(struct file *file,
 	}
 
 	if (c == 'c') {
-		struct seq_file *seqf = (struct seq_file *)file->private_data;
+		struct seq_file *seqf = file->private_data;
 		struct kvm_vcpu *vcpu = seqf->private;
 		/* Write does not affect our buffers previously generated with
 		 * show. seq_file is locked here to prevent races of init with
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 111da1c03a1..5bb89c82807 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -18,8 +18,9 @@ obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
-obj-$(CONFIG_XMON)	+= sstep.o
-obj-$(CONFIG_KPROBES)	+= sstep.o
+obj-$(CONFIG_XMON)	+= sstep.o ldstfp.o
+obj-$(CONFIG_KPROBES)	+= sstep.o ldstfp.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= sstep.o ldstfp.o
 
 ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_SMP)	+= locks.o
diff --git a/arch/powerpc/lib/ldstfp.S b/arch/powerpc/lib/ldstfp.S
new file mode 100644
index 00000000000..f6448636baf
--- /dev/null
+++ b/arch/powerpc/lib/ldstfp.S
@@ -0,0 +1,375 @@
+/*
+ * Floating-point, VMX/Altivec and VSX loads and stores
+ * for use in instruction emulation.
+ *
+ * Copyright 2010 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/ppc-opcode.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <linux/errno.h>
+
+#define STKFRM	(PPC_MIN_STKFRM + 16)
+
+	.macro	extab	instr,handler
+	.section __ex_table,"a"
+	PPC_LONG \instr,\handler
+	.previous
+	.endm
+
+	.macro	inst32	op
+reg = 0
+	.rept	32
+20:	\op	reg,0,r4
+	b	3f
+	extab	20b,99f
+reg = reg + 1
+	.endr
+	.endm
+
+/* Get the contents of frN into fr0; N is in r3. */
+_GLOBAL(get_fpr)
+	mflr	r0
+	rlwinm	r3,r3,3,0xf8
+	bcl	20,31,1f
+	blr			/* fr0 is already in fr0 */
+	nop
+reg = 1
+	.rept	31
+	fmr	fr0,reg
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Put the contents of fr0 into frN; N is in r3. */
+_GLOBAL(put_fpr)
+	mflr	r0
+	rlwinm	r3,r3,3,0xf8
+	bcl	20,31,1f
+	blr			/* fr0 is already in fr0 */
+	nop
+reg = 1
+	.rept	31
+	fmr	reg,fr0
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Load FP reg N from float at *p.  N is in r3, p in r4. */
+_GLOBAL(do_lfs)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	ori	r7,r6,MSR_FP
+	cmpwi	cr7,r3,0
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stfd	fr0,STKFRM-16(r1)
+1:	li	r9,-EFAULT
+2:	lfs	fr0,0(r4)
+	li	r9,0
+3:	bl	put_fpr
+	beq	cr7,4f
+	lfd	fr0,STKFRM-16(r1)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+/* Load FP reg N from double at *p.  N is in r3, p in r4. */
+_GLOBAL(do_lfd)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	ori	r7,r6,MSR_FP
+	cmpwi	cr7,r3,0
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stfd	fr0,STKFRM-16(r1)
+1:	li	r9,-EFAULT
+2:	lfd	fr0,0(r4)
+	li	r9,0
+3:	beq	cr7,4f
+	bl	put_fpr
+	lfd	fr0,STKFRM-16(r1)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+/* Store FP reg N to float at *p.  N is in r3, p in r4. */
+_GLOBAL(do_stfs)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	ori	r7,r6,MSR_FP
+	cmpwi	cr7,r3,0
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stfd	fr0,STKFRM-16(r1)
+	bl	get_fpr
+1:	li	r9,-EFAULT
+2:	stfs	fr0,0(r4)
+	li	r9,0
+3:	beq	cr7,4f
+	lfd	fr0,STKFRM-16(r1)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+/* Store FP reg N to double at *p.  N is in r3, p in r4. */
+_GLOBAL(do_stfd)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	ori	r7,r6,MSR_FP
+	cmpwi	cr7,r3,0
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stfd	fr0,STKFRM-16(r1)
+	bl	get_fpr
+1:	li	r9,-EFAULT
+2:	stfd	fr0,0(r4)
+	li	r9,0
+3:	beq	cr7,4f
+	lfd	fr0,STKFRM-16(r1)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+#ifdef CONFIG_ALTIVEC
+/* Get the contents of vrN into vr0; N is in r3. */
+_GLOBAL(get_vr)
+	mflr	r0
+	rlwinm	r3,r3,3,0xf8
+	bcl	20,31,1f
+	blr			/* vr0 is already in vr0 */
+	nop
+reg = 1
+	.rept	31
+	vor	vr0,reg,reg	/* assembler doesn't know vmr? */
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Put the contents of vr0 into vrN; N is in r3. */
+_GLOBAL(put_vr)
+	mflr	r0
+	rlwinm	r3,r3,3,0xf8
+	bcl	20,31,1f
+	blr			/* vr0 is already in vr0 */
+	nop
+reg = 1
+	.rept	31
+	vor	reg,vr0,vr0
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Load vector reg N from *p.  N is in r3, p in r4. */
+_GLOBAL(do_lvx)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	oris	r7,r6,MSR_VEC@h
+	cmpwi	cr7,r3,0
+	li	r8,STKFRM-16
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stvx	vr0,r1,r8
+1:	li	r9,-EFAULT
+2:	lvx	vr0,0,r4
+	li	r9,0
+3:	beq	cr7,4f
+	bl	put_vr
+	lvx	vr0,r1,r8
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+/* Store vector reg N to *p.  N is in r3, p in r4. */
+_GLOBAL(do_stvx)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	oris	r7,r6,MSR_VEC@h
+	cmpwi	cr7,r3,0
+	li	r8,STKFRM-16
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	stvx	vr0,r1,r8
+	bl	get_vr
+1:	li	r9,-EFAULT
+2:	stvx	vr0,0,r4
+	li	r9,0
+3:	beq	cr7,4f
+	lvx	vr0,r1,r8
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_VSX
+/* Get the contents of vsrN into vsr0; N is in r3. */
+_GLOBAL(get_vsr)
+	mflr	r0
+	rlwinm	r3,r3,3,0x1f8
+	bcl	20,31,1f
+	blr			/* vsr0 is already in vsr0 */
+	nop
+reg = 1
+	.rept	63
+	XXLOR(0,reg,reg)
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Put the contents of vsr0 into vsrN; N is in r3. */
+_GLOBAL(put_vsr)
+	mflr	r0
+	rlwinm	r3,r3,3,0x1f8
+	bcl	20,31,1f
+	blr			/* vr0 is already in vr0 */
+	nop
+reg = 1
+	.rept	63
+	XXLOR(reg,0,0)
+	blr
+reg = reg + 1
+	.endr
+1:	mflr	r5
+	add	r5,r3,r5
+	mtctr	r5
+	mtlr	r0
+	bctr
+
+/* Load VSX reg N from vector doubleword *p.  N is in r3, p in r4. */
+_GLOBAL(do_lxvd2x)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	oris	r7,r6,MSR_VSX@h
+	cmpwi	cr7,r3,0
+	li	r8,STKFRM-16
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	STXVD2X(0,r1,r8)
+1:	li	r9,-EFAULT
+2:	LXVD2X(0,0,r4)
+	li	r9,0
+3:	beq	cr7,4f
+	bl	put_vsr
+	LXVD2X(0,r1,r8)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+/* Store VSX reg N to vector doubleword *p.  N is in r3, p in r4. */
+_GLOBAL(do_stxvd2x)
+	PPC_STLU r1,-STKFRM(r1)
+	mflr	r0
+	PPC_STL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mfmsr	r6
+	oris	r7,r6,MSR_VSX@h
+	cmpwi	cr7,r3,0
+	li	r8,STKFRM-16
+	mtmsrd	r7
+	isync
+	beq	cr7,1f
+	STXVD2X(0,r1,r8)
+	bl	get_vsr
+1:	li	r9,-EFAULT
+2:	STXVD2X(0,0,r4)
+	li	r9,0
+3:	beq	cr7,4f
+	LXVD2X(0,r1,r8)
+4:	PPC_LL	r0,STKFRM+PPC_LR_STKOFF(r1)
+	mtlr	r0
+	mtmsrd	r6
+	isync
+	mr	r3,r9
+	addi	r1,r1,STKFRM
+	blr
+	extab	2b,3b
+
+#endif /* CONFIG_VSX */
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index 13b7d54f185..e0a9858d537 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -13,6 +13,8 @@
 #include <linux/ptrace.h>
 #include <asm/sstep.h>
 #include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/cputable.h>
 
 extern char system_call_common[];
 
@@ -23,6 +25,23 @@ extern char system_call_common[];
 #define MSR_MASK	0x87c0ffff
 #endif
 
+/* Bits in XER */
+#define XER_SO		0x80000000U
+#define XER_OV		0x40000000U
+#define XER_CA		0x20000000U
+
+/*
+ * Functions in ldstfp.S
+ */
+extern int do_lfs(int rn, unsigned long ea);
+extern int do_lfd(int rn, unsigned long ea);
+extern int do_stfs(int rn, unsigned long ea);
+extern int do_stfd(int rn, unsigned long ea);
+extern int do_lvx(int rn, unsigned long ea);
+extern int do_stvx(int rn, unsigned long ea);
+extern int do_lxvd2x(int rn, unsigned long ea);
+extern int do_stxvd2x(int rn, unsigned long ea);
+
 /*
  * Determine whether a conditional branch instruction would branch.
  */
@@ -46,16 +65,499 @@ static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs)
 	return 1;
 }
 
+
+static long __kprobes address_ok(struct pt_regs *regs, unsigned long ea, int nb)
+{
+	if (!user_mode(regs))
+		return 1;
+	return __access_ok(ea, nb, USER_DS);
+}
+
+/*
+ * Calculate effective address for a D-form instruction
+ */
+static unsigned long __kprobes dform_ea(unsigned int instr, struct pt_regs *regs)
+{
+	int ra;
+	unsigned long ea;
+
+	ra = (instr >> 16) & 0x1f;
+	ea = (signed short) instr;		/* sign-extend */
+	if (ra) {
+		ea += regs->gpr[ra];
+		if (instr & 0x04000000)		/* update forms */
+			regs->gpr[ra] = ea;
+	}
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_SF))
+		ea &= 0xffffffffUL;
+#endif
+	return ea;
+}
+
+#ifdef __powerpc64__
+/*
+ * Calculate effective address for a DS-form instruction
+ */
+static unsigned long __kprobes dsform_ea(unsigned int instr, struct pt_regs *regs)
+{
+	int ra;
+	unsigned long ea;
+
+	ra = (instr >> 16) & 0x1f;
+	ea = (signed short) (instr & ~3);	/* sign-extend */
+	if (ra) {
+		ea += regs->gpr[ra];
+		if ((instr & 3) == 1)		/* update forms */
+			regs->gpr[ra] = ea;
+	}
+	if (!(regs->msr & MSR_SF))
+		ea &= 0xffffffffUL;
+	return ea;
+}
+#endif /* __powerpc64 */
+
+/*
+ * Calculate effective address for an X-form instruction
+ */
+static unsigned long __kprobes xform_ea(unsigned int instr, struct pt_regs *regs,
+				     int do_update)
+{
+	int ra, rb;
+	unsigned long ea;
+
+	ra = (instr >> 16) & 0x1f;
+	rb = (instr >> 11) & 0x1f;
+	ea = regs->gpr[rb];
+	if (ra) {
+		ea += regs->gpr[ra];
+		if (do_update)		/* update forms */
+			regs->gpr[ra] = ea;
+	}
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_SF))
+		ea &= 0xffffffffUL;
+#endif
+	return ea;
+}
+
+/*
+ * Return the largest power of 2, not greater than sizeof(unsigned long),
+ * such that x is a multiple of it.
+ */
+static inline unsigned long max_align(unsigned long x)
+{
+	x |= sizeof(unsigned long);
+	return x & -x;		/* isolates rightmost bit */
+}
+
+
+static inline unsigned long byterev_2(unsigned long x)
+{
+	return ((x >> 8) & 0xff) | ((x & 0xff) << 8);
+}
+
+static inline unsigned long byterev_4(unsigned long x)
+{
+	return ((x >> 24) & 0xff) | ((x >> 8) & 0xff00) |
+		((x & 0xff00) << 8) | ((x & 0xff) << 24);
+}
+
+#ifdef __powerpc64__
+static inline unsigned long byterev_8(unsigned long x)
+{
+	return (byterev_4(x) << 32) | byterev_4(x >> 32);
+}
+#endif
+
+static int __kprobes read_mem_aligned(unsigned long *dest, unsigned long ea,
+				      int nb)
+{
+	int err = 0;
+	unsigned long x = 0;
+
+	switch (nb) {
+	case 1:
+		err = __get_user(x, (unsigned char __user *) ea);
+		break;
+	case 2:
+		err = __get_user(x, (unsigned short __user *) ea);
+		break;
+	case 4:
+		err = __get_user(x, (unsigned int __user *) ea);
+		break;
+#ifdef __powerpc64__
+	case 8:
+		err = __get_user(x, (unsigned long __user *) ea);
+		break;
+#endif
+	}
+	if (!err)
+		*dest = x;
+	return err;
+}
+
+static int __kprobes read_mem_unaligned(unsigned long *dest, unsigned long ea,
+					int nb, struct pt_regs *regs)
+{
+	int err;
+	unsigned long x, b, c;
+
+	/* unaligned, do this in pieces */
+	x = 0;
+	for (; nb > 0; nb -= c) {
+		c = max_align(ea);
+		if (c > nb)
+			c = max_align(nb);
+		err = read_mem_aligned(&b, ea, c);
+		if (err)
+			return err;
+		x = (x << (8 * c)) + b;
+		ea += c;
+	}
+	*dest = x;
+	return 0;
+}
+
+/*
+ * Read memory at address ea for nb bytes, return 0 for success
+ * or -EFAULT if an error occurred.
+ */
+static int __kprobes read_mem(unsigned long *dest, unsigned long ea, int nb,
+			      struct pt_regs *regs)
+{
+	if (!address_ok(regs, ea, nb))
+		return -EFAULT;
+	if ((ea & (nb - 1)) == 0)
+		return read_mem_aligned(dest, ea, nb);
+	return read_mem_unaligned(dest, ea, nb, regs);
+}
+
+static int __kprobes write_mem_aligned(unsigned long val, unsigned long ea,
+				       int nb)
+{
+	int err = 0;
+
+	switch (nb) {
+	case 1:
+		err = __put_user(val, (unsigned char __user *) ea);
+		break;
+	case 2:
+		err = __put_user(val, (unsigned short __user *) ea);
+		break;
+	case 4:
+		err = __put_user(val, (unsigned int __user *) ea);
+		break;
+#ifdef __powerpc64__
+	case 8:
+		err = __put_user(val, (unsigned long __user *) ea);
+		break;
+#endif
+	}
+	return err;
+}
+
+static int __kprobes write_mem_unaligned(unsigned long val, unsigned long ea,
+					 int nb, struct pt_regs *regs)
+{
+	int err;
+	unsigned long c;
+
+	/* unaligned or little-endian, do this in pieces */
+	for (; nb > 0; nb -= c) {
+		c = max_align(ea);
+		if (c > nb)
+			c = max_align(nb);
+		err = write_mem_aligned(val >> (nb - c) * 8, ea, c);
+		if (err)
+			return err;
+		++ea;
+	}
+	return 0;
+}
+
+/*
+ * Write memory at address ea for nb bytes, return 0 for success
+ * or -EFAULT if an error occurred.
+ */
+static int __kprobes write_mem(unsigned long val, unsigned long ea, int nb,
+			       struct pt_regs *regs)
+{
+	if (!address_ok(regs, ea, nb))
+		return -EFAULT;
+	if ((ea & (nb - 1)) == 0)
+		return write_mem_aligned(val, ea, nb);
+	return write_mem_unaligned(val, ea, nb, regs);
+}
+
 /*
- * Emulate instructions that cause a transfer of control.
+ * Check the address and alignment, and call func to do the actual
+ * load or store.
+ */
+static int __kprobes do_fp_load(int rn, int (*func)(int, unsigned long),
+				unsigned long ea, int nb,
+				struct pt_regs *regs)
+{
+	int err;
+	unsigned long val[sizeof(double) / sizeof(long)];
+	unsigned long ptr;
+
+	if (!address_ok(regs, ea, nb))
+		return -EFAULT;
+	if ((ea & 3) == 0)
+		return (*func)(rn, ea);
+	ptr = (unsigned long) &val[0];
+	if (sizeof(unsigned long) == 8 || nb == 4) {
+		err = read_mem_unaligned(&val[0], ea, nb, regs);
+		ptr += sizeof(unsigned long) - nb;
+	} else {
+		/* reading a double on 32-bit */
+		err = read_mem_unaligned(&val[0], ea, 4, regs);
+		if (!err)
+			err = read_mem_unaligned(&val[1], ea + 4, 4, regs);
+	}
+	if (err)
+		return err;
+	return (*func)(rn, ptr);
+}
+
+static int __kprobes do_fp_store(int rn, int (*func)(int, unsigned long),
+				 unsigned long ea, int nb,
+				 struct pt_regs *regs)
+{
+	int err;
+	unsigned long val[sizeof(double) / sizeof(long)];
+	unsigned long ptr;
+
+	if (!address_ok(regs, ea, nb))
+		return -EFAULT;
+	if ((ea & 3) == 0)
+		return (*func)(rn, ea);
+	ptr = (unsigned long) &val[0];
+	if (sizeof(unsigned long) == 8 || nb == 4) {
+		ptr += sizeof(unsigned long) - nb;
+		err = (*func)(rn, ptr);
+		if (err)
+			return err;
+		err = write_mem_unaligned(val[0], ea, nb, regs);
+	} else {
+		/* writing a double on 32-bit */
+		err = (*func)(rn, ptr);
+		if (err)
+			return err;
+		err = write_mem_unaligned(val[0], ea, 4, regs);
+		if (!err)
+			err = write_mem_unaligned(val[1], ea + 4, 4, regs);
+	}
+	return err;
+}
+
+#ifdef CONFIG_ALTIVEC
+/* For Altivec/VMX, no need to worry about alignment */
+static int __kprobes do_vec_load(int rn, int (*func)(int, unsigned long),
+				 unsigned long ea, struct pt_regs *regs)
+{
+	if (!address_ok(regs, ea & ~0xfUL, 16))
+		return -EFAULT;
+	return (*func)(rn, ea);
+}
+
+static int __kprobes do_vec_store(int rn, int (*func)(int, unsigned long),
+				  unsigned long ea, struct pt_regs *regs)
+{
+	if (!address_ok(regs, ea & ~0xfUL, 16))
+		return -EFAULT;
+	return (*func)(rn, ea);
+}
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_VSX
+static int __kprobes do_vsx_load(int rn, int (*func)(int, unsigned long),
+				 unsigned long ea, struct pt_regs *regs)
+{
+	int err;
+	unsigned long val[2];
+
+	if (!address_ok(regs, ea, 16))
+		return -EFAULT;
+	if ((ea & 3) == 0)
+		return (*func)(rn, ea);
+	err = read_mem_unaligned(&val[0], ea, 8, regs);
+	if (!err)
+		err = read_mem_unaligned(&val[1], ea + 8, 8, regs);
+	if (!err)
+		err = (*func)(rn, (unsigned long) &val[0]);
+	return err;
+}
+
+static int __kprobes do_vsx_store(int rn, int (*func)(int, unsigned long),
+				 unsigned long ea, struct pt_regs *regs)
+{
+	int err;
+	unsigned long val[2];
+
+	if (!address_ok(regs, ea, 16))
+		return -EFAULT;
+	if ((ea & 3) == 0)
+		return (*func)(rn, ea);
+	err = (*func)(rn, (unsigned long) &val[0]);
+	if (err)
+		return err;
+	err = write_mem_unaligned(val[0], ea, 8, regs);
+	if (!err)
+		err = write_mem_unaligned(val[1], ea + 8, 8, regs);
+	return err;
+}
+#endif /* CONFIG_VSX */
+
+#define __put_user_asmx(x, addr, err, op, cr)		\
+	__asm__ __volatile__(				\
+		"1:	" op " %2,0,%3\n"		\
+		"	mfcr	%1\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li	%0,%4\n"		\
+		"	b	2b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err), "=r" (cr)			\
+		: "r" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __get_user_asmx(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0,%2\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li	%0,%3\n"		\
+		"	b	2b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err), "=r" (x)			\
+		: "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __cacheop_user_asmx(addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" 0,%1\n"			\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li	%0,%3\n"		\
+		"	b	2b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err)				\
+		: "r" (addr), "i" (-EFAULT), "0" (err))
+
+static void __kprobes set_cr0(struct pt_regs *regs, int rd)
+{
+	long val = regs->gpr[rd];
+
+	regs->ccr = (regs->ccr & 0x0fffffff) | ((regs->xer >> 3) & 0x10000000);
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_SF))
+		val = (int) val;
+#endif
+	if (val < 0)
+		regs->ccr |= 0x80000000;
+	else if (val > 0)
+		regs->ccr |= 0x40000000;
+	else
+		regs->ccr |= 0x20000000;
+}
+
+static void __kprobes add_with_carry(struct pt_regs *regs, int rd,
+				     unsigned long val1, unsigned long val2,
+				     unsigned long carry_in)
+{
+	unsigned long val = val1 + val2;
+
+	if (carry_in)
+		++val;
+	regs->gpr[rd] = val;
+#ifdef __powerpc64__
+	if (!(regs->msr & MSR_SF)) {
+		val = (unsigned int) val;
+		val1 = (unsigned int) val1;
+	}
+#endif
+	if (val < val1 || (carry_in && val == val1))
+		regs->xer |= XER_CA;
+	else
+		regs->xer &= ~XER_CA;
+}
+
+static void __kprobes do_cmp_signed(struct pt_regs *regs, long v1, long v2,
+				    int crfld)
+{
+	unsigned int crval, shift;
+
+	crval = (regs->xer >> 31) & 1;		/* get SO bit */
+	if (v1 < v2)
+		crval |= 8;
+	else if (v1 > v2)
+		crval |= 4;
+	else
+		crval |= 2;
+	shift = (7 - crfld) * 4;
+	regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift);
+}
+
+static void __kprobes do_cmp_unsigned(struct pt_regs *regs, unsigned long v1,
+				      unsigned long v2, int crfld)
+{
+	unsigned int crval, shift;
+
+	crval = (regs->xer >> 31) & 1;		/* get SO bit */
+	if (v1 < v2)
+		crval |= 8;
+	else if (v1 > v2)
+		crval |= 4;
+	else
+		crval |= 2;
+	shift = (7 - crfld) * 4;
+	regs->ccr = (regs->ccr & ~(0xf << shift)) | (crval << shift);
+}
+
+/*
+ * Elements of 32-bit rotate and mask instructions.
+ */
+#define MASK32(mb, me)	((0xffffffffUL >> (mb)) + \
+			 ((signed long)-0x80000000L >> (me)) + ((me) >= (mb)))
+#ifdef __powerpc64__
+#define MASK64_L(mb)	(~0UL >> (mb))
+#define MASK64_R(me)	((signed long)-0x8000000000000000L >> (me))
+#define MASK64(mb, me)	(MASK64_L(mb) + MASK64_R(me) + ((me) >= (mb)))
+#define DATA32(x)	(((x) & 0xffffffffUL) | (((x) & 0xffffffffUL) << 32))
+#else
+#define DATA32(x)	(x)
+#endif
+#define ROTATE(x, n)	((n) ? (((x) << (n)) | ((x) >> (8 * sizeof(long) - (n)))) : (x))
+
+/*
+ * Emulate instructions that cause a transfer of control,
+ * loads and stores, and a few other instructions.
  * Returns 1 if the step was emulated, 0 if not,
  * or -1 if the instruction is one that should not be stepped,
  * such as an rfid, or a mtmsrd that would clear MSR_RI.
  */
 int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 {
-	unsigned int opcode, rs, rb, rd, spr;
+	unsigned int opcode, ra, rb, rd, spr, u;
 	unsigned long int imm;
+	unsigned long int val, val2;
+	unsigned long int ea;
+	unsigned int cr, mb, me, sh;
+	int err;
+	unsigned long old_ra;
+	long ival;
 
 	opcode = instr >> 26;
 	switch (opcode) {
@@ -78,7 +580,13 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		 * entry code works.  If that is changed, this will
 		 * need to be changed also.
 		 */
+		if (regs->gpr[0] == 0x1ebe &&
+		    cpu_has_feature(CPU_FTR_REAL_LE)) {
+			regs->msr ^= MSR_LE;
+			goto instr_done;
+		}
 		regs->gpr[9] = regs->gpr[13];
+		regs->gpr[10] = MSR_KERNEL;
 		regs->gpr[11] = regs->nip + 4;
 		regs->gpr[12] = regs->msr & MSR_MASK;
 		regs->gpr[13] = (unsigned long) get_paca();
@@ -102,9 +610,9 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 		regs->nip = imm;
 		return 1;
 	case 19:
-		switch (instr & 0x7fe) {
-		case 0x20:	/* bclr */
-		case 0x420:	/* bcctr */
+		switch ((instr >> 1) & 0x3ff) {
+		case 16:	/* bclr */
+		case 528:	/* bcctr */
 			imm = (instr & 0x400)? regs->ctr: regs->link;
 			regs->nip += 4;
 			if ((regs->msr & MSR_SF) == 0) {
@@ -116,30 +624,233 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 			if (branch_taken(instr, regs))
 				regs->nip = imm;
 			return 1;
-		case 0x24:	/* rfid, scary */
+
+		case 18:	/* rfid, scary */
 			return -1;
+
+		case 150:	/* isync */
+			isync();
+			goto instr_done;
+
+		case 33:	/* crnor */
+		case 129:	/* crandc */
+		case 193:	/* crxor */
+		case 225:	/* crnand */
+		case 257:	/* crand */
+		case 289:	/* creqv */
+		case 417:	/* crorc */
+		case 449:	/* cror */
+			ra = (instr >> 16) & 0x1f;
+			rb = (instr >> 11) & 0x1f;
+			rd = (instr >> 21) & 0x1f;
+			ra = (regs->ccr >> (31 - ra)) & 1;
+			rb = (regs->ccr >> (31 - rb)) & 1;
+			val = (instr >> (6 + ra * 2 + rb)) & 1;
+			regs->ccr = (regs->ccr & ~(1UL << (31 - rd))) |
+				(val << (31 - rd));
+			goto instr_done;
+		}
+		break;
+	case 31:
+		switch ((instr >> 1) & 0x3ff) {
+		case 598:	/* sync */
+#ifdef __powerpc64__
+			switch ((instr >> 21) & 3) {
+			case 1:		/* lwsync */
+				asm volatile("lwsync" : : : "memory");
+				goto instr_done;
+			case 2:		/* ptesync */
+				asm volatile("ptesync" : : : "memory");
+				goto instr_done;
+			}
+#endif
+			mb();
+			goto instr_done;
+
+		case 854:	/* eieio */
+			eieio();
+			goto instr_done;
+		}
+		break;
+	}
+
+	/* Following cases refer to regs->gpr[], so we need all regs */
+	if (!FULL_REGS(regs))
+		return 0;
+
+	rd = (instr >> 21) & 0x1f;
+	ra = (instr >> 16) & 0x1f;
+	rb = (instr >> 11) & 0x1f;
+
+	switch (opcode) {
+	case 7:		/* mulli */
+		regs->gpr[rd] = regs->gpr[ra] * (short) instr;
+		goto instr_done;
+
+	case 8:		/* subfic */
+		imm = (short) instr;
+		add_with_carry(regs, rd, ~regs->gpr[ra], imm, 1);
+		goto instr_done;
+
+	case 10:	/* cmpli */
+		imm = (unsigned short) instr;
+		val = regs->gpr[ra];
+#ifdef __powerpc64__
+		if ((rd & 1) == 0)
+			val = (unsigned int) val;
+#endif
+		do_cmp_unsigned(regs, val, imm, rd >> 2);
+		goto instr_done;
+
+	case 11:	/* cmpi */
+		imm = (short) instr;
+		val = regs->gpr[ra];
+#ifdef __powerpc64__
+		if ((rd & 1) == 0)
+			val = (int) val;
+#endif
+		do_cmp_signed(regs, val, imm, rd >> 2);
+		goto instr_done;
+
+	case 12:	/* addic */
+		imm = (short) instr;
+		add_with_carry(regs, rd, regs->gpr[ra], imm, 0);
+		goto instr_done;
+
+	case 13:	/* addic. */
+		imm = (short) instr;
+		add_with_carry(regs, rd, regs->gpr[ra], imm, 0);
+		set_cr0(regs, rd);
+		goto instr_done;
+
+	case 14:	/* addi */
+		imm = (short) instr;
+		if (ra)
+			imm += regs->gpr[ra];
+		regs->gpr[rd] = imm;
+		goto instr_done;
+
+	case 15:	/* addis */
+		imm = ((short) instr) << 16;
+		if (ra)
+			imm += regs->gpr[ra];
+		regs->gpr[rd] = imm;
+		goto instr_done;
+
+	case 20:	/* rlwimi */
+		mb = (instr >> 6) & 0x1f;
+		me = (instr >> 1) & 0x1f;
+		val = DATA32(regs->gpr[rd]);
+		imm = MASK32(mb, me);
+		regs->gpr[ra] = (regs->gpr[ra] & ~imm) | (ROTATE(val, rb) & imm);
+		goto logical_done;
+
+	case 21:	/* rlwinm */
+		mb = (instr >> 6) & 0x1f;
+		me = (instr >> 1) & 0x1f;
+		val = DATA32(regs->gpr[rd]);
+		regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me);
+		goto logical_done;
+
+	case 23:	/* rlwnm */
+		mb = (instr >> 6) & 0x1f;
+		me = (instr >> 1) & 0x1f;
+		rb = regs->gpr[rb] & 0x1f;
+		val = DATA32(regs->gpr[rd]);
+		regs->gpr[ra] = ROTATE(val, rb) & MASK32(mb, me);
+		goto logical_done;
+
+	case 24:	/* ori */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] | imm;
+		goto instr_done;
+
+	case 25:	/* oris */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] | (imm << 16);
+		goto instr_done;
+
+	case 26:	/* xori */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] ^ imm;
+		goto instr_done;
+
+	case 27:	/* xoris */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] ^ (imm << 16);
+		goto instr_done;
+
+	case 28:	/* andi. */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] & imm;
+		set_cr0(regs, ra);
+		goto instr_done;
+
+	case 29:	/* andis. */
+		imm = (unsigned short) instr;
+		regs->gpr[ra] = regs->gpr[rd] & (imm << 16);
+		set_cr0(regs, ra);
+		goto instr_done;
+
+#ifdef __powerpc64__
+	case 30:	/* rld* */
+		mb = ((instr >> 6) & 0x1f) | (instr & 0x20);
+		val = regs->gpr[rd];
+		if ((instr & 0x10) == 0) {
+			sh = rb | ((instr & 2) << 4);
+			val = ROTATE(val, sh);
+			switch ((instr >> 2) & 3) {
+			case 0:		/* rldicl */
+				regs->gpr[ra] = val & MASK64_L(mb);
+				goto logical_done;
+			case 1:		/* rldicr */
+				regs->gpr[ra] = val & MASK64_R(mb);
+				goto logical_done;
+			case 2:		/* rldic */
+				regs->gpr[ra] = val & MASK64(mb, 63 - sh);
+				goto logical_done;
+			case 3:		/* rldimi */
+				imm = MASK64(mb, 63 - sh);
+				regs->gpr[ra] = (regs->gpr[ra] & ~imm) |
+					(val & imm);
+				goto logical_done;
+			}
+		} else {
+			sh = regs->gpr[rb] & 0x3f;
+			val = ROTATE(val, sh);
+			switch ((instr >> 1) & 7) {
+			case 0:		/* rldcl */
+				regs->gpr[ra] = val & MASK64_L(mb);
+				goto logical_done;
+			case 1:		/* rldcr */
+				regs->gpr[ra] = val & MASK64_R(mb);
+				goto logical_done;
+			}
 		}
+#endif
+
 	case 31:
-		rd = (instr >> 21) & 0x1f;
-		switch (instr & 0x7fe) {
-		case 0xa6:	/* mfmsr */
+		switch ((instr >> 1) & 0x3ff) {
+		case 83:	/* mfmsr */
+			if (regs->msr & MSR_PR)
+				break;
 			regs->gpr[rd] = regs->msr & MSR_MASK;
-			regs->nip += 4;
-			if ((regs->msr & MSR_SF) == 0)
-				regs->nip &= 0xffffffffUL;
-			return 1;
-		case 0x124:	/* mtmsr */
+			goto instr_done;
+		case 146:	/* mtmsr */
+			if (regs->msr & MSR_PR)
+				break;
 			imm = regs->gpr[rd];
 			if ((imm & MSR_RI) == 0)
 				/* can't step mtmsr that would clear MSR_RI */
 				return -1;
 			regs->msr = imm;
-			regs->nip += 4;
-			return 1;
+			goto instr_done;
 #ifdef CONFIG_PPC64
-		case 0x164:	/* mtmsrd */
+		case 178:	/* mtmsrd */
 			/* only MSR_EE and MSR_RI get changed if bit 15 set */
 			/* mtmsrd doesn't change MSR_HV and MSR_ME */
+			if (regs->msr & MSR_PR)
+				break;
 			imm = (instr & 0x10000)? 0x8002: 0xefffffffffffefffUL;
 			imm = (regs->msr & MSR_MASK & ~imm)
 				| (regs->gpr[rd] & imm);
@@ -147,57 +858,770 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr)
 				/* can't step mtmsrd that would clear MSR_RI */
 				return -1;
 			regs->msr = imm;
-			regs->nip += 4;
-			if ((imm & MSR_SF) == 0)
-				regs->nip &= 0xffffffffUL;
-			return 1;
+			goto instr_done;
 #endif
-		case 0x26:	/* mfcr */
+		case 19:	/* mfcr */
 			regs->gpr[rd] = regs->ccr;
 			regs->gpr[rd] &= 0xffffffffUL;
-			goto mtspr_out;
-		case 0x2a6:	/* mfspr */
+			goto instr_done;
+
+		case 144:	/* mtcrf */
+			imm = 0xf0000000UL;
+			val = regs->gpr[rd];
+			for (sh = 0; sh < 8; ++sh) {
+				if (instr & (0x80000 >> sh))
+					regs->ccr = (regs->ccr & ~imm) |
+						(val & imm);
+				imm >>= 4;
+			}
+			goto instr_done;
+
+		case 339:	/* mfspr */
 			spr = (instr >> 11) & 0x3ff;
 			switch (spr) {
 			case 0x20:	/* mfxer */
 				regs->gpr[rd] = regs->xer;
 				regs->gpr[rd] &= 0xffffffffUL;
-				goto mtspr_out;
+				goto instr_done;
 			case 0x100:	/* mflr */
 				regs->gpr[rd] = regs->link;
-				goto mtspr_out;
+				goto instr_done;
 			case 0x120:	/* mfctr */
 				regs->gpr[rd] = regs->ctr;
-				goto mtspr_out;
-			}
-			break;
-		case 0x378:	/* orx */
-			if (instr & 1)
-				break;
-			rs = (instr >> 21) & 0x1f;
-			rb = (instr >> 11) & 0x1f;
-			if (rs == rb) {		/* mr */
-				rd = (instr >> 16) & 0x1f;
-				regs->gpr[rd] = regs->gpr[rs];
-				goto mtspr_out;
+				goto instr_done;
 			}
 			break;
-		case 0x3a6:	/* mtspr */
+
+		case 467:	/* mtspr */
 			spr = (instr >> 11) & 0x3ff;
 			switch (spr) {
 			case 0x20:	/* mtxer */
 				regs->xer = (regs->gpr[rd] & 0xffffffffUL);
-				goto mtspr_out;
+				goto instr_done;
 			case 0x100:	/* mtlr */
 				regs->link = regs->gpr[rd];
-				goto mtspr_out;
+				goto instr_done;
 			case 0x120:	/* mtctr */
 				regs->ctr = regs->gpr[rd];
-mtspr_out:
-				regs->nip += 4;
-				return 1;
+				goto instr_done;
 			}
+			break;
+
+/*
+ * Compare instructions
+ */
+		case 0:	/* cmp */
+			val = regs->gpr[ra];
+			val2 = regs->gpr[rb];
+#ifdef __powerpc64__
+			if ((rd & 1) == 0) {
+				/* word (32-bit) compare */
+				val = (int) val;
+				val2 = (int) val2;
+			}
+#endif
+			do_cmp_signed(regs, val, val2, rd >> 2);
+			goto instr_done;
+
+		case 32:	/* cmpl */
+			val = regs->gpr[ra];
+			val2 = regs->gpr[rb];
+#ifdef __powerpc64__
+			if ((rd & 1) == 0) {
+				/* word (32-bit) compare */
+				val = (unsigned int) val;
+				val2 = (unsigned int) val2;
+			}
+#endif
+			do_cmp_unsigned(regs, val, val2, rd >> 2);
+			goto instr_done;
+
+/*
+ * Arithmetic instructions
+ */
+		case 8:	/* subfc */
+			add_with_carry(regs, rd, ~regs->gpr[ra],
+				       regs->gpr[rb], 1);
+			goto arith_done;
+#ifdef __powerpc64__
+		case 9:	/* mulhdu */
+			asm("mulhdu %0,%1,%2" : "=r" (regs->gpr[rd]) :
+			    "r" (regs->gpr[ra]), "r" (regs->gpr[rb]));
+			goto arith_done;
+#endif
+		case 10:	/* addc */
+			add_with_carry(regs, rd, regs->gpr[ra],
+				       regs->gpr[rb], 0);
+			goto arith_done;
+
+		case 11:	/* mulhwu */
+			asm("mulhwu %0,%1,%2" : "=r" (regs->gpr[rd]) :
+			    "r" (regs->gpr[ra]), "r" (regs->gpr[rb]));
+			goto arith_done;
+
+		case 40:	/* subf */
+			regs->gpr[rd] = regs->gpr[rb] - regs->gpr[ra];
+			goto arith_done;
+#ifdef __powerpc64__
+		case 73:	/* mulhd */
+			asm("mulhd %0,%1,%2" : "=r" (regs->gpr[rd]) :
+			    "r" (regs->gpr[ra]), "r" (regs->gpr[rb]));
+			goto arith_done;
+#endif
+		case 75:	/* mulhw */
+			asm("mulhw %0,%1,%2" : "=r" (regs->gpr[rd]) :
+			    "r" (regs->gpr[ra]), "r" (regs->gpr[rb]));
+			goto arith_done;
+
+		case 104:	/* neg */
+			regs->gpr[rd] = -regs->gpr[ra];
+			goto arith_done;
+
+		case 136:	/* subfe */
+			add_with_carry(regs, rd, ~regs->gpr[ra], regs->gpr[rb],
+				       regs->xer & XER_CA);
+			goto arith_done;
+
+		case 138:	/* adde */
+			add_with_carry(regs, rd, regs->gpr[ra], regs->gpr[rb],
+				       regs->xer & XER_CA);
+			goto arith_done;
+
+		case 200:	/* subfze */
+			add_with_carry(regs, rd, ~regs->gpr[ra], 0L,
+				       regs->xer & XER_CA);
+			goto arith_done;
+
+		case 202:	/* addze */
+			add_with_carry(regs, rd, regs->gpr[ra], 0L,
+				       regs->xer & XER_CA);
+			goto arith_done;
+
+		case 232:	/* subfme */
+			add_with_carry(regs, rd, ~regs->gpr[ra], -1L,
+				       regs->xer & XER_CA);
+			goto arith_done;
+#ifdef __powerpc64__
+		case 233:	/* mulld */
+			regs->gpr[rd] = regs->gpr[ra] * regs->gpr[rb];
+			goto arith_done;
+#endif
+		case 234:	/* addme */
+			add_with_carry(regs, rd, regs->gpr[ra], -1L,
+				       regs->xer & XER_CA);
+			goto arith_done;
+
+		case 235:	/* mullw */
+			regs->gpr[rd] = (unsigned int) regs->gpr[ra] *
+				(unsigned int) regs->gpr[rb];
+			goto arith_done;
+
+		case 266:	/* add */
+			regs->gpr[rd] = regs->gpr[ra] + regs->gpr[rb];
+			goto arith_done;
+#ifdef __powerpc64__
+		case 457:	/* divdu */
+			regs->gpr[rd] = regs->gpr[ra] / regs->gpr[rb];
+			goto arith_done;
+#endif
+		case 459:	/* divwu */
+			regs->gpr[rd] = (unsigned int) regs->gpr[ra] /
+				(unsigned int) regs->gpr[rb];
+			goto arith_done;
+#ifdef __powerpc64__
+		case 489:	/* divd */
+			regs->gpr[rd] = (long int) regs->gpr[ra] /
+				(long int) regs->gpr[rb];
+			goto arith_done;
+#endif
+		case 491:	/* divw */
+			regs->gpr[rd] = (int) regs->gpr[ra] /
+				(int) regs->gpr[rb];
+			goto arith_done;
+
+
+/*
+ * Logical instructions
+ */
+		case 26:	/* cntlzw */
+			asm("cntlzw %0,%1" : "=r" (regs->gpr[ra]) :
+			    "r" (regs->gpr[rd]));
+			goto logical_done;
+#ifdef __powerpc64__
+		case 58:	/* cntlzd */
+			asm("cntlzd %0,%1" : "=r" (regs->gpr[ra]) :
+			    "r" (regs->gpr[rd]));
+			goto logical_done;
+#endif
+		case 28:	/* and */
+			regs->gpr[ra] = regs->gpr[rd] & regs->gpr[rb];
+			goto logical_done;
+
+		case 60:	/* andc */
+			regs->gpr[ra] = regs->gpr[rd] & ~regs->gpr[rb];
+			goto logical_done;
+
+		case 124:	/* nor */
+			regs->gpr[ra] = ~(regs->gpr[rd] | regs->gpr[rb]);
+			goto logical_done;
+
+		case 284:	/* xor */
+			regs->gpr[ra] = ~(regs->gpr[rd] ^ regs->gpr[rb]);
+			goto logical_done;
+
+		case 316:	/* xor */
+			regs->gpr[ra] = regs->gpr[rd] ^ regs->gpr[rb];
+			goto logical_done;
+
+		case 412:	/* orc */
+			regs->gpr[ra] = regs->gpr[rd] | ~regs->gpr[rb];
+			goto logical_done;
+
+		case 444:	/* or */
+			regs->gpr[ra] = regs->gpr[rd] | regs->gpr[rb];
+			goto logical_done;
+
+		case 476:	/* nand */
+			regs->gpr[ra] = ~(regs->gpr[rd] & regs->gpr[rb]);
+			goto logical_done;
+
+		case 922:	/* extsh */
+			regs->gpr[ra] = (signed short) regs->gpr[rd];
+			goto logical_done;
+
+		case 954:	/* extsb */
+			regs->gpr[ra] = (signed char) regs->gpr[rd];
+			goto logical_done;
+#ifdef __powerpc64__
+		case 986:	/* extsw */
+			regs->gpr[ra] = (signed int) regs->gpr[rd];
+			goto logical_done;
+#endif
+
+/*
+ * Shift instructions
+ */
+		case 24:	/* slw */
+			sh = regs->gpr[rb] & 0x3f;
+			if (sh < 32)
+				regs->gpr[ra] = (regs->gpr[rd] << sh) & 0xffffffffUL;
+			else
+				regs->gpr[ra] = 0;
+			goto logical_done;
+
+		case 536:	/* srw */
+			sh = regs->gpr[rb] & 0x3f;
+			if (sh < 32)
+				regs->gpr[ra] = (regs->gpr[rd] & 0xffffffffUL) >> sh;
+			else
+				regs->gpr[ra] = 0;
+			goto logical_done;
+
+		case 792:	/* sraw */
+			sh = regs->gpr[rb] & 0x3f;
+			ival = (signed int) regs->gpr[rd];
+			regs->gpr[ra] = ival >> (sh < 32 ? sh : 31);
+			if (ival < 0 && (sh >= 32 || (ival & ((1 << sh) - 1)) != 0))
+				regs->xer |= XER_CA;
+			else
+				regs->xer &= ~XER_CA;
+			goto logical_done;
+
+		case 824:	/* srawi */
+			sh = rb;
+			ival = (signed int) regs->gpr[rd];
+			regs->gpr[ra] = ival >> sh;
+			if (ival < 0 && (ival & ((1 << sh) - 1)) != 0)
+				regs->xer |= XER_CA;
+			else
+				regs->xer &= ~XER_CA;
+			goto logical_done;
+
+#ifdef __powerpc64__
+		case 27:	/* sld */
+			sh = regs->gpr[rd] & 0x7f;
+			if (sh < 64)
+				regs->gpr[ra] = regs->gpr[rd] << sh;
+			else
+				regs->gpr[ra] = 0;
+			goto logical_done;
+
+		case 539:	/* srd */
+			sh = regs->gpr[rb] & 0x7f;
+			if (sh < 64)
+				regs->gpr[ra] = regs->gpr[rd] >> sh;
+			else
+				regs->gpr[ra] = 0;
+			goto logical_done;
+
+		case 794:	/* srad */
+			sh = regs->gpr[rb] & 0x7f;
+			ival = (signed long int) regs->gpr[rd];
+			regs->gpr[ra] = ival >> (sh < 64 ? sh : 63);
+			if (ival < 0 && (sh >= 64 || (ival & ((1 << sh) - 1)) != 0))
+				regs->xer |= XER_CA;
+			else
+				regs->xer &= ~XER_CA;
+			goto logical_done;
+
+		case 826:	/* sradi with sh_5 = 0 */
+		case 827:	/* sradi with sh_5 = 1 */
+			sh = rb | ((instr & 2) << 4);
+			ival = (signed long int) regs->gpr[rd];
+			regs->gpr[ra] = ival >> sh;
+			if (ival < 0 && (ival & ((1 << sh) - 1)) != 0)
+				regs->xer |= XER_CA;
+			else
+				regs->xer &= ~XER_CA;
+			goto logical_done;
+#endif /* __powerpc64__ */
+
+/*
+ * Cache instructions
+ */
+		case 54:	/* dcbst */
+			ea = xform_ea(instr, regs, 0);
+			if (!address_ok(regs, ea, 8))
+				return 0;
+			err = 0;
+			__cacheop_user_asmx(ea, err, "dcbst");
+			if (err)
+				return 0;
+			goto instr_done;
+
+		case 86:	/* dcbf */
+			ea = xform_ea(instr, regs, 0);
+			if (!address_ok(regs, ea, 8))
+				return 0;
+			err = 0;
+			__cacheop_user_asmx(ea, err, "dcbf");
+			if (err)
+				return 0;
+			goto instr_done;
+
+		case 246:	/* dcbtst */
+			if (rd == 0) {
+				ea = xform_ea(instr, regs, 0);
+				prefetchw((void *) ea);
+			}
+			goto instr_done;
+
+		case 278:	/* dcbt */
+			if (rd == 0) {
+				ea = xform_ea(instr, regs, 0);
+				prefetch((void *) ea);
+			}
+			goto instr_done;
+
 		}
+		break;
 	}
-	return 0;
+
+	/*
+	 * Following cases are for loads and stores, so bail out
+	 * if we're in little-endian mode.
+	 */
+	if (regs->msr & MSR_LE)
+		return 0;
+
+	/*
+	 * Save register RA in case it's an update form load or store
+	 * and the access faults.
+	 */
+	old_ra = regs->gpr[ra];
+
+	switch (opcode) {
+	case 31:
+		u = instr & 0x40;
+		switch ((instr >> 1) & 0x3ff) {
+		case 20:	/* lwarx */
+			ea = xform_ea(instr, regs, 0);
+			if (ea & 3)
+				break;		/* can't handle misaligned */
+			err = -EFAULT;
+			if (!address_ok(regs, ea, 4))
+				goto ldst_done;
+			err = 0;
+			__get_user_asmx(val, ea, err, "lwarx");
+			if (!err)
+				regs->gpr[rd] = val;
+			goto ldst_done;
+
+		case 150:	/* stwcx. */
+			ea = xform_ea(instr, regs, 0);
+			if (ea & 3)
+				break;		/* can't handle misaligned */
+			err = -EFAULT;
+			if (!address_ok(regs, ea, 4))
+				goto ldst_done;
+			err = 0;
+			__put_user_asmx(regs->gpr[rd], ea, err, "stwcx.", cr);
+			if (!err)
+				regs->ccr = (regs->ccr & 0x0fffffff) |
+					(cr & 0xe0000000) |
+					((regs->xer >> 3) & 0x10000000);
+			goto ldst_done;
+
+#ifdef __powerpc64__
+		case 84:	/* ldarx */
+			ea = xform_ea(instr, regs, 0);
+			if (ea & 7)
+				break;		/* can't handle misaligned */
+			err = -EFAULT;
+			if (!address_ok(regs, ea, 8))
+				goto ldst_done;
+			err = 0;
+			__get_user_asmx(val, ea, err, "ldarx");
+			if (!err)
+				regs->gpr[rd] = val;
+			goto ldst_done;
+
+		case 214:	/* stdcx. */
+			ea = xform_ea(instr, regs, 0);
+			if (ea & 7)
+				break;		/* can't handle misaligned */
+			err = -EFAULT;
+			if (!address_ok(regs, ea, 8))
+				goto ldst_done;
+			err = 0;
+			__put_user_asmx(regs->gpr[rd], ea, err, "stdcx.", cr);
+			if (!err)
+				regs->ccr = (regs->ccr & 0x0fffffff) |
+					(cr & 0xe0000000) |
+					((regs->xer >> 3) & 0x10000000);
+			goto ldst_done;
+
+		case 21:	/* ldx */
+		case 53:	/* ldux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       8, regs);
+			goto ldst_done;
+#endif
+
+		case 23:	/* lwzx */
+		case 55:	/* lwzux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       4, regs);
+			goto ldst_done;
+
+		case 87:	/* lbzx */
+		case 119:	/* lbzux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       1, regs);
+			goto ldst_done;
+
+#ifdef CONFIG_ALTIVEC
+		case 103:	/* lvx */
+		case 359:	/* lvxl */
+			if (!(regs->msr & MSR_VEC))
+				break;
+			ea = xform_ea(instr, regs, 0);
+			err = do_vec_load(rd, do_lvx, ea, regs);
+			goto ldst_done;
+
+		case 231:	/* stvx */
+		case 487:	/* stvxl */
+			if (!(regs->msr & MSR_VEC))
+				break;
+			ea = xform_ea(instr, regs, 0);
+			err = do_vec_store(rd, do_stvx, ea, regs);
+			goto ldst_done;
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef __powerpc64__
+		case 149:	/* stdx */
+		case 181:	/* stdux */
+			val = regs->gpr[rd];
+			err = write_mem(val, xform_ea(instr, regs, u), 8, regs);
+			goto ldst_done;
+#endif
+
+		case 151:	/* stwx */
+		case 183:	/* stwux */
+			val = regs->gpr[rd];
+			err = write_mem(val, xform_ea(instr, regs, u), 4, regs);
+			goto ldst_done;
+
+		case 215:	/* stbx */
+		case 247:	/* stbux */
+			val = regs->gpr[rd];
+			err = write_mem(val, xform_ea(instr, regs, u), 1, regs);
+			goto ldst_done;
+
+		case 279:	/* lhzx */
+		case 311:	/* lhzux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       2, regs);
+			goto ldst_done;
+
+#ifdef __powerpc64__
+		case 341:	/* lwax */
+		case 373:	/* lwaux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       4, regs);
+			if (!err)
+				regs->gpr[rd] = (signed int) regs->gpr[rd];
+			goto ldst_done;
+#endif
+
+		case 343:	/* lhax */
+		case 375:	/* lhaux */
+			err = read_mem(&regs->gpr[rd], xform_ea(instr, regs, u),
+				       2, regs);
+			if (!err)
+				regs->gpr[rd] = (signed short) regs->gpr[rd];
+			goto ldst_done;
+
+		case 407:	/* sthx */
+		case 439:	/* sthux */
+			val = regs->gpr[rd];
+			err = write_mem(val, xform_ea(instr, regs, u), 2, regs);
+			goto ldst_done;
+
+#ifdef __powerpc64__
+		case 532:	/* ldbrx */
+			err = read_mem(&val, xform_ea(instr, regs, 0), 8, regs);
+			if (!err)
+				regs->gpr[rd] = byterev_8(val);
+			goto ldst_done;
+
+#endif
+
+		case 534:	/* lwbrx */
+			err = read_mem(&val, xform_ea(instr, regs, 0), 4, regs);
+			if (!err)
+				regs->gpr[rd] = byterev_4(val);
+			goto ldst_done;
+
+		case 535:	/* lfsx */
+		case 567:	/* lfsux */
+			if (!(regs->msr & MSR_FP))
+				break;
+			ea = xform_ea(instr, regs, u);
+			err = do_fp_load(rd, do_lfs, ea, 4, regs);
+			goto ldst_done;
+
+		case 599:	/* lfdx */
+		case 631:	/* lfdux */
+			if (!(regs->msr & MSR_FP))
+				break;
+			ea = xform_ea(instr, regs, u);
+			err = do_fp_load(rd, do_lfd, ea, 8, regs);
+			goto ldst_done;
+
+		case 663:	/* stfsx */
+		case 695:	/* stfsux */
+			if (!(regs->msr & MSR_FP))
+				break;
+			ea = xform_ea(instr, regs, u);
+			err = do_fp_store(rd, do_stfs, ea, 4, regs);
+			goto ldst_done;
+
+		case 727:	/* stfdx */
+		case 759:	/* stfdux */
+			if (!(regs->msr & MSR_FP))
+				break;
+			ea = xform_ea(instr, regs, u);
+			err = do_fp_store(rd, do_stfd, ea, 8, regs);
+			goto ldst_done;
+
+#ifdef __powerpc64__
+		case 660:	/* stdbrx */
+			val = byterev_8(regs->gpr[rd]);
+			err = write_mem(val, xform_ea(instr, regs, 0), 8, regs);
+			goto ldst_done;
+
+#endif
+		case 662:	/* stwbrx */
+			val = byterev_4(regs->gpr[rd]);
+			err = write_mem(val, xform_ea(instr, regs, 0), 4, regs);
+			goto ldst_done;
+
+		case 790:	/* lhbrx */
+			err = read_mem(&val, xform_ea(instr, regs, 0), 2, regs);
+			if (!err)
+				regs->gpr[rd] = byterev_2(val);
+			goto ldst_done;
+
+		case 918:	/* sthbrx */
+			val = byterev_2(regs->gpr[rd]);
+			err = write_mem(val, xform_ea(instr, regs, 0), 2, regs);
+			goto ldst_done;
+
+#ifdef CONFIG_VSX
+		case 844:	/* lxvd2x */
+		case 876:	/* lxvd2ux */
+			if (!(regs->msr & MSR_VSX))
+				break;
+			rd |= (instr & 1) << 5;
+			ea = xform_ea(instr, regs, u);
+			err = do_vsx_load(rd, do_lxvd2x, ea, regs);
+			goto ldst_done;
+
+		case 972:	/* stxvd2x */
+		case 1004:	/* stxvd2ux */
+			if (!(regs->msr & MSR_VSX))
+				break;
+			rd |= (instr & 1) << 5;
+			ea = xform_ea(instr, regs, u);
+			err = do_vsx_store(rd, do_stxvd2x, ea, regs);
+			goto ldst_done;
+
+#endif /* CONFIG_VSX */
+		}
+		break;
+
+	case 32:	/* lwz */
+	case 33:	/* lwzu */
+		err = read_mem(&regs->gpr[rd], dform_ea(instr, regs), 4, regs);
+		goto ldst_done;
+
+	case 34:	/* lbz */
+	case 35:	/* lbzu */
+		err = read_mem(&regs->gpr[rd], dform_ea(instr, regs), 1, regs);
+		goto ldst_done;
+
+	case 36:	/* stw */
+	case 37:	/* stwu */
+		val = regs->gpr[rd];
+		err = write_mem(val, dform_ea(instr, regs), 4, regs);
+		goto ldst_done;
+
+	case 38:	/* stb */
+	case 39:	/* stbu */
+		val = regs->gpr[rd];
+		err = write_mem(val, dform_ea(instr, regs), 1, regs);
+		goto ldst_done;
+
+	case 40:	/* lhz */
+	case 41:	/* lhzu */
+		err = read_mem(&regs->gpr[rd], dform_ea(instr, regs), 2, regs);
+		goto ldst_done;
+
+	case 42:	/* lha */
+	case 43:	/* lhau */
+		err = read_mem(&regs->gpr[rd], dform_ea(instr, regs), 2, regs);
+		if (!err)
+			regs->gpr[rd] = (signed short) regs->gpr[rd];
+		goto ldst_done;
+
+	case 44:	/* sth */
+	case 45:	/* sthu */
+		val = regs->gpr[rd];
+		err = write_mem(val, dform_ea(instr, regs), 2, regs);
+		goto ldst_done;
+
+	case 46:	/* lmw */
+		ra = (instr >> 16) & 0x1f;
+		if (ra >= rd)
+			break;		/* invalid form, ra in range to load */
+		ea = dform_ea(instr, regs);
+		do {
+			err = read_mem(&regs->gpr[rd], ea, 4, regs);
+			if (err)
+				return 0;
+			ea += 4;
+		} while (++rd < 32);
+		goto instr_done;
+
+	case 47:	/* stmw */
+		ea = dform_ea(instr, regs);
+		do {
+			err = write_mem(regs->gpr[rd], ea, 4, regs);
+			if (err)
+				return 0;
+			ea += 4;
+		} while (++rd < 32);
+		goto instr_done;
+
+	case 48:	/* lfs */
+	case 49:	/* lfsu */
+		if (!(regs->msr & MSR_FP))
+			break;
+		ea = dform_ea(instr, regs);
+		err = do_fp_load(rd, do_lfs, ea, 4, regs);
+		goto ldst_done;
+
+	case 50:	/* lfd */
+	case 51:	/* lfdu */
+		if (!(regs->msr & MSR_FP))
+			break;
+		ea = dform_ea(instr, regs);
+		err = do_fp_load(rd, do_lfd, ea, 8, regs);
+		goto ldst_done;
+
+	case 52:	/* stfs */
+	case 53:	/* stfsu */
+		if (!(regs->msr & MSR_FP))
+			break;
+		ea = dform_ea(instr, regs);
+		err = do_fp_store(rd, do_stfs, ea, 4, regs);
+		goto ldst_done;
+
+	case 54:	/* stfd */
+	case 55:	/* stfdu */
+		if (!(regs->msr & MSR_FP))
+			break;
+		ea = dform_ea(instr, regs);
+		err = do_fp_store(rd, do_stfd, ea, 8, regs);
+		goto ldst_done;
+
+#ifdef __powerpc64__
+	case 58:	/* ld[u], lwa */
+		switch (instr & 3) {
+		case 0:		/* ld */
+			err = read_mem(&regs->gpr[rd], dsform_ea(instr, regs),
+				       8, regs);
+			goto ldst_done;
+		case 1:		/* ldu */
+			err = read_mem(&regs->gpr[rd], dsform_ea(instr, regs),
+				       8, regs);
+			goto ldst_done;
+		case 2:		/* lwa */
+			err = read_mem(&regs->gpr[rd], dsform_ea(instr, regs),
+				       4, regs);
+			if (!err)
+				regs->gpr[rd] = (signed int) regs->gpr[rd];
+			goto ldst_done;
+		}
+		break;
+
+	case 62:	/* std[u] */
+		val = regs->gpr[rd];
+		switch (instr & 3) {
+		case 0:		/* std */
+			err = write_mem(val, dsform_ea(instr, regs), 8, regs);
+			goto ldst_done;
+		case 1:		/* stdu */
+			err = write_mem(val, dsform_ea(instr, regs), 8, regs);
+			goto ldst_done;
+		}
+		break;
+#endif /* __powerpc64__ */
+
+	}
+	err = -EINVAL;
+
+ ldst_done:
+	if (err) {
+		regs->gpr[ra] = old_ra;
+		return 0;	/* invoke DSI if -EFAULT? */
+	}
+ instr_done:
+	regs->nip += 4;
+#ifdef __powerpc64__
+	if ((regs->msr & MSR_SF) == 0)
+		regs->nip &= 0xffffffffUL;
+#endif
+	return 1;
+
+ logical_done:
+	if (instr & 1)
+		set_cr0(regs, ra);
+	goto instr_done;
+
+ arith_done:
+	if (instr & 1)
+		set_cr0(regs, rd);
+	goto instr_done;
 }
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index cdc7526e9c9..4b66a1ece6d 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -104,9 +104,10 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 }
 
 /*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 4 between 4k and 256M.
+ * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
+ * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus
+ * that support extended page sizes).  Note that while some cpus support a
+ * page size of 4G, we don't allow its use here.
  */
 static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		unsigned long size, unsigned long flags, unsigned int pid)
diff --git a/arch/powerpc/mm/highmem.c b/arch/powerpc/mm/highmem.c
index c2186c74c85..857d4173f9c 100644
--- a/arch/powerpc/mm/highmem.c
+++ b/arch/powerpc/mm/highmem.c
@@ -52,7 +52,7 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
 }
 EXPORT_SYMBOL(kmap_atomic_prot);
 
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 #ifdef CONFIG_DEBUG_HIGHMEM
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
@@ -74,4 +74,4 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #endif
 	pagefault_enable();
 }
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_notypecheck);
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index aa731af720c..002878ccf90 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -42,6 +42,12 @@ EXPORT_SYMBOL(node_data);
 
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
+static int form1_affinity;
+
+#define MAX_DISTANCE_REF_POINTS 4
+static int distance_ref_points_depth;
+static const unsigned int *distance_ref_points;
+static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS];
 
 /*
  * Allocate node_to_cpumask_map based on number of available nodes
@@ -204,6 +210,39 @@ static const u32 *of_get_usable_memory(struct device_node *memory)
 	return prop;
 }
 
+int __node_distance(int a, int b)
+{
+	int i;
+	int distance = LOCAL_DISTANCE;
+
+	if (!form1_affinity)
+		return distance;
+
+	for (i = 0; i < distance_ref_points_depth; i++) {
+		if (distance_lookup_table[a][i] == distance_lookup_table[b][i])
+			break;
+
+		/* Double the distance for each NUMA level */
+		distance *= 2;
+	}
+
+	return distance;
+}
+
+static void initialize_distance_lookup_table(int nid,
+		const unsigned int *associativity)
+{
+	int i;
+
+	if (!form1_affinity)
+		return;
+
+	for (i = 0; i < distance_ref_points_depth; i++) {
+		distance_lookup_table[nid][i] =
+			associativity[distance_ref_points[i]];
+	}
+}
+
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
  * info is found.
  */
@@ -225,6 +264,10 @@ static int of_node_to_nid_single(struct device_node *device)
 	/* POWER4 LPAR uses 0xffff as invalid node */
 	if (nid == 0xffff || nid >= MAX_NUMNODES)
 		nid = -1;
+
+	if (nid > 0 && tmp[0] >= distance_ref_points_depth)
+		initialize_distance_lookup_table(nid, tmp);
+
 out:
 	return nid;
 }
@@ -251,26 +294,10 @@ int of_node_to_nid(struct device_node *device)
 }
 EXPORT_SYMBOL_GPL(of_node_to_nid);
 
-/*
- * In theory, the "ibm,associativity" property may contain multiple
- * associativity lists because a resource may be multiply connected
- * into the machine.  This resource then has different associativity
- * characteristics relative to its multiple connections.  We ignore
- * this for now.  We also assume that all cpu and memory sets have
- * their distances represented at a common level.  This won't be
- * true for hierarchical NUMA.
- *
- * In any case the ibm,associativity-reference-points should give
- * the correct depth for a normal NUMA system.
- *
- * - Dave Hansen <haveblue@us.ibm.com>
- */
 static int __init find_min_common_depth(void)
 {
-	int depth, index;
-	const unsigned int *ref_points;
+	int depth;
 	struct device_node *rtas_root;
-	unsigned int len;
 	struct device_node *chosen;
 	const char *vec5;
 
@@ -280,18 +307,28 @@ static int __init find_min_common_depth(void)
 		return -1;
 
 	/*
-	 * this property is 2 32-bit integers, each representing a level of
-	 * depth in the associativity nodes.  The first is for an SMP
-	 * configuration (should be all 0's) and the second is for a normal
-	 * NUMA configuration.
+	 * This property is a set of 32-bit integers, each representing
+	 * an index into the ibm,associativity nodes.
+	 *
+	 * With form 0 affinity the first integer is for an SMP configuration
+	 * (should be all 0's) and the second is for a normal NUMA
+	 * configuration. We have only one level of NUMA.
+	 *
+	 * With form 1 affinity the first integer is the most significant
+	 * NUMA boundary and the following are progressively less significant
+	 * boundaries. There can be more than one level of NUMA.
 	 */
-	index = 1;
-	ref_points = of_get_property(rtas_root,
-			"ibm,associativity-reference-points", &len);
+	distance_ref_points = of_get_property(rtas_root,
+					"ibm,associativity-reference-points",
+					&distance_ref_points_depth);
+
+	if (!distance_ref_points) {
+		dbg("NUMA: ibm,associativity-reference-points not found.\n");
+		goto err;
+	}
+
+	distance_ref_points_depth /= sizeof(int);
 
-	/*
-	 * For form 1 affinity information we want the first field
-	 */
 #define VEC5_AFFINITY_BYTE	5
 #define VEC5_AFFINITY		0x80
 	chosen = of_find_node_by_path("/chosen");
@@ -299,19 +336,38 @@ static int __init find_min_common_depth(void)
 		vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
 		if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
 			dbg("Using form 1 affinity\n");
-			index = 0;
+			form1_affinity = 1;
 		}
 	}
 
-	if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
-		depth = ref_points[index];
+	if (form1_affinity) {
+		depth = distance_ref_points[0];
 	} else {
-		dbg("NUMA: ibm,associativity-reference-points not found.\n");
-		depth = -1;
+		if (distance_ref_points_depth < 2) {
+			printk(KERN_WARNING "NUMA: "
+				"short ibm,associativity-reference-points\n");
+			goto err;
+		}
+
+		depth = distance_ref_points[1];
 	}
-	of_node_put(rtas_root);
 
+	/*
+	 * Warn and cap if the hardware supports more than
+	 * MAX_DISTANCE_REF_POINTS domains.
+	 */
+	if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) {
+		printk(KERN_WARNING "NUMA: distance array capped at "
+			"%d entries\n", MAX_DISTANCE_REF_POINTS);
+		distance_ref_points_depth = MAX_DISTANCE_REF_POINTS;
+	}
+
+	of_node_put(rtas_root);
 	return depth;
+
+err:
+	of_node_put(rtas_root);
+	return -1;
 }
 
 static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index ebc2f38eb38..2c7e801ab20 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -92,7 +92,6 @@ static void pte_free_rcu_callback(struct rcu_head *head)
 
 static void pte_free_submit(struct pte_freelist_batch *batch)
 {
-	INIT_RCU_HEAD(&batch->rcu);
 	call_rcu(&batch->rcu, pte_free_rcu_callback);
 }
 
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 8aaa8b7eb32..690566b66e8 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -89,17 +89,6 @@ void tlb_flush(struct mmu_gather *tlb)
  *    -- Cort
  */
 
-/*
- * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
- * the cache operations on the bus.  Hence we need to use an IPI
- * to get the other CPU(s) to invalidate their TLBs.
- */
-#ifdef CONFIG_SMP_750
-#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
-#else
-#define FINISH_FLUSH	do { } while (0)
-#endif
-
 static void flush_range(struct mm_struct *mm, unsigned long start,
 			unsigned long end)
 {
@@ -138,7 +127,6 @@ static void flush_range(struct mm_struct *mm, unsigned long start,
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 {
 	flush_range(&init_mm, start, end);
-	FINISH_FLUSH;
 }
 EXPORT_SYMBOL(flush_tlb_kernel_range);
 
@@ -162,7 +150,6 @@ void flush_tlb_mm(struct mm_struct *mm)
 	 */
 	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
 		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
-	FINISH_FLUSH;
 }
 EXPORT_SYMBOL(flush_tlb_mm);
 
@@ -179,7 +166,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 	pmd = pmd_offset(pud_offset(pgd_offset(mm, vmaddr), vmaddr), vmaddr);
 	if (!pmd_none(*pmd))
 		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
-	FINISH_FLUSH;
 }
 EXPORT_SYMBOL(flush_tlb_page);
 
@@ -192,6 +178,5 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
 	flush_range(vma->vm_mm, start, end);
-	FINISH_FLUSH;
 }
 EXPORT_SYMBOL(flush_tlb_range);
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d8695b02a96..fe391e94252 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -46,6 +46,7 @@
 struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
+		.ind	= 20,
 		.enc	= BOOK3E_PAGESZ_4K,
 	},
 	[MMU_PAGE_16K] = {
@@ -54,6 +55,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 	},
 	[MMU_PAGE_64K] = {
 		.shift	= 16,
+		.ind	= 28,
 		.enc	= BOOK3E_PAGESZ_64K,
 	},
 	[MMU_PAGE_1M] = {
@@ -62,6 +64,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 	},
 	[MMU_PAGE_16M] = {
 		.shift	= 24,
+		.ind	= 36,
 		.enc	= BOOK3E_PAGESZ_16M,
 	},
 	[MMU_PAGE_256M] = {
@@ -344,16 +347,108 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
 	}
 }
 
-/*
- * Early initialization of the MMU TLB code
- */
-static void __early_init_mmu(int boot_cpu)
+static void setup_page_sizes(void)
+{
+	unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+	unsigned int tlb0ps = mfspr(SPRN_TLB0PS);
+	unsigned int eptcfg = mfspr(SPRN_EPTCFG);
+	int i, psize;
+
+	/* Look for supported direct sizes */
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+		if (tlb0ps & (1U << (def->shift - 10)))
+			def->flags |= MMU_PAGE_SIZE_DIRECT;
+	}
+
+	/* Indirect page sizes supported ? */
+	if ((tlb0cfg & TLBnCFG_IND) == 0)
+		goto no_indirect;
+
+	/* Now, we only deal with one IND page size for each
+	 * direct size. Hopefully all implementations today are
+	 * unambiguous, but we might want to be careful in the
+	 * future.
+	 */
+	for (i = 0; i < 3; i++) {
+		unsigned int ps, sps;
+
+		sps = eptcfg & 0x1f;
+		eptcfg >>= 5;
+		ps = eptcfg & 0x1f;
+		eptcfg >>= 5;
+		if (!ps || !sps)
+			continue;
+		for (psize = 0; psize < MMU_PAGE_COUNT; psize++) {
+			struct mmu_psize_def *def = &mmu_psize_defs[psize];
+
+			if (ps == (def->shift - 10))
+				def->flags |= MMU_PAGE_SIZE_INDIRECT;
+			if (sps == (def->shift - 10))
+				def->ind = ps + 10;
+		}
+	}
+ no_indirect:
+
+	/* Cleanup array and print summary */
+	pr_info("MMU: Supported page sizes\n");
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		struct mmu_psize_def *def = &mmu_psize_defs[psize];
+		const char *__page_type_names[] = {
+			"unsupported",
+			"direct",
+			"indirect",
+			"direct & indirect"
+		};
+		if (def->flags == 0) {
+			def->shift = 0;	
+			continue;
+		}
+		pr_info("  %8ld KB as %s\n", 1ul << (def->shift - 10),
+			__page_type_names[def->flags & 0x3]);
+	}
+}
+
+static void setup_mmu_htw(void)
 {
 	extern unsigned int interrupt_base_book3e;
 	extern unsigned int exc_data_tlb_miss_htw_book3e;
 	extern unsigned int exc_instruction_tlb_miss_htw_book3e;
 
 	unsigned int *ibase = &interrupt_base_book3e;
+
+	/* Check if HW tablewalk is present, and if yes, enable it by:
+	 *
+	 * - patching the TLB miss handlers to branch to the
+	 *   one dedicates to it
+	 *
+	 * - setting the global book3e_htw_enabled
+       	 */
+	unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+
+	if ((tlb0cfg & TLBnCFG_IND) &&
+	    (tlb0cfg & TLBnCFG_PT)) {
+		/* Our exceptions vectors start with a NOP and -then- a branch
+		 * to deal with single stepping from userspace which stops on
+		 * the second instruction. Thus we need to patch the second
+		 * instruction of the exception, not the first one
+		 */
+		patch_branch(ibase + (0x1c0 / 4) + 1,
+			     (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
+		patch_branch(ibase + (0x1e0 / 4) + 1,
+			     (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
+		book3e_htw_enabled = 1;
+	}
+	pr_info("MMU: Book3E Page Tables %s\n",
+		book3e_htw_enabled ? "Enabled" : "Disabled");
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void __early_init_mmu(int boot_cpu)
+{
 	unsigned int mas4;
 
 	/* XXX This will have to be decided at runtime, but right
@@ -370,35 +465,17 @@ static void __early_init_mmu(int boot_cpu)
 	 */
 	mmu_vmemmap_psize = MMU_PAGE_16M;
 
-	/* Check if HW tablewalk is present, and if yes, enable it by:
-	 *
-	 * - patching the TLB miss handlers to branch to the
-	 *   one dedicates to it
-	 *
-	 * - setting the global book3e_htw_enabled
-	 *
-	 * - Set MAS4:INDD and default page size
-	 */
-
 	/* XXX This code only checks for TLB 0 capabilities and doesn't
 	 *     check what page size combos are supported by the HW. It
 	 *     also doesn't handle the case where a separate array holds
 	 *     the IND entries from the array loaded by the PT.
 	 */
 	if (boot_cpu) {
-		unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+		/* Look for supported page sizes */
+		setup_page_sizes();
 
-		/* Check if HW loader is supported */
-		if ((tlb0cfg & TLBnCFG_IND) &&
-		    (tlb0cfg & TLBnCFG_PT)) {
-			patch_branch(ibase + (0x1c0 / 4),
-			     (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
-			patch_branch(ibase + (0x1e0 / 4),
-			     (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
-			book3e_htw_enabled = 1;
-		}
-		pr_info("MMU: Book3E Page Tables %s\n",
-			book3e_htw_enabled ? "Enabled" : "Disabled");
+		/* Look for HW tablewalk support */
+		setup_mmu_htw();
 	}
 
 	/* Set MAS4 based on page table setting */
diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile
index 73e1c2ca055..e219ca43962 100644
--- a/arch/powerpc/oprofile/Makefile
+++ b/arch/powerpc/oprofile/Makefile
@@ -16,6 +16,6 @@ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
 oprofile-$(CONFIG_OPROFILE_CELL) += op_model_cell.o \
 		cell/spu_profiler.o cell/vma_map.o \
 		cell/spu_task_sync.o
-oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
+oprofile-$(CONFIG_PPC_BOOK3S_64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
 oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
 oprofile-$(CONFIG_6xx) += op_model_7450.o
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index 21f16edf6c8..d65e68f3cb2 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -199,7 +199,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 		return -ENODEV;
 
 	switch (cur_cpu_spec->oprofile_type) {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #ifdef CONFIG_OPROFILE_CELL
 		case PPC_OPROFILE_CELL:
 			if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index ec64264f7a5..b72176434eb 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -71,22 +71,6 @@ config MAKALU
 	help
 	  This option enables support for the AMCC PPC405EX board.
 
-#config REDWOOD_5
-#	bool "Redwood-5"
-#	depends on 40x
-#	default n
-#	select STB03xxx
-#	help
-#	  This option enables support for the IBM STB04 evaluation board.
-
-#config REDWOOD_6
-#	bool "Redwood-6"
-#	depends on 40x
-#	default n
-#	select STB03xxx
-#	help
-#	  This option enables support for the IBM STBx25xx evaluation board.
-
 #config SYCAMORE
 #	bool "Sycamore"
 #	depends on 40x
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4dac9b0525a..27b0651221d 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -1,32 +1,34 @@
 config PPC_MPC512x
-	bool
+	bool "512x-based boards"
+	depends on 6xx
 	select FSL_SOC
 	select IPIC
 	select PPC_CLOCK
 	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 
-config PPC_MPC5121
-	bool
-	select PPC_MPC512x
-
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
-	depends on 6xx
+	depends on PPC_MPC512x
 	select DEFAULT_UIMAGE
-	select PPC_MPC5121
 	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
 
 config MPC5121_GENERIC
 	bool "Generic support for simple MPC5121 based boards"
-	depends on 6xx
+	depends on PPC_MPC512x
 	select DEFAULT_UIMAGE
-	select PPC_MPC5121
 	help
 	  This option enables support for simple MPC5121 based boards
 	  which do not need custom platform specific setup.
 
 	  Compatible boards include:  Protonic LVT base boards (ZANMCU
 	  and VICVT2).
+
+config PDM360NG
+	bool "ifm PDM360NG board"
+	depends on PPC_MPC512x
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the PDM360NG board.
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 90be2f5717e..4efc1c4b6fb 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -4,3 +4,4 @@
 obj-y				+= clock.o mpc512x_shared.o
 obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
 obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
+obj-$(CONFIG_PDM360NG)		+= pdm360ng.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 4c42246b86a..5b243bd3eb3 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -292,6 +292,15 @@ static void diu_clk_calc(struct clk *clk)
 	clk->rate = rate;
 }
 
+static void viu_clk_calc(struct clk *clk)
+{
+	unsigned long rate;
+
+	rate = sys_clk.rate;
+	rate /= 2;
+	clk->rate = rate;
+}
+
 static void half_clk_calc(struct clk *clk)
 {
 	clk->rate = clk->parent->rate / 2;
@@ -412,6 +421,14 @@ static struct clk diu_clk = {
 	.calc = diu_clk_calc,
 };
 
+static struct clk viu_clk = {
+	.name = "viu_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 18,
+	.calc = viu_clk_calc,
+};
+
 static struct clk axe_clk = {
 	.name = "axe_clk",
 	.flags = CLK_HAS_CTRL,
@@ -535,6 +552,7 @@ struct clk *rate_clks[] = {
 	&ref_clk,
 	&sys_clk,
 	&diu_clk,
+	&viu_clk,
 	&csb_clk,
 	&e300_clk,
 	&ips_clk,
@@ -660,7 +678,7 @@ static void psc_clks_init(void)
 {
 	struct device_node *np;
 	const u32 *cell_index;
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 
 	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
 		cell_index = of_get_property(np, "cell-index", NULL);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index ee6ae129c25..dcef6ade48e 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -42,6 +42,7 @@ static void __init mpc5121_ads_setup_arch(void)
 	for_each_compatible_node(np, "pci", "fsl,mpc5121-pci")
 		mpc83xx_add_bridge(np);
 #endif
+	mpc512x_setup_diu();
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
@@ -65,6 +66,7 @@ define_machine(mpc5121_ads) {
 	.probe			= mpc5121_ads_probe,
 	.setup_arch		= mpc5121_ads_setup_arch,
 	.init			= mpc512x_init,
+	.init_early		= mpc512x_init_diu,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
index a6c0e3a2615..e487eb06ec6 100644
--- a/arch/powerpc/platforms/512x/mpc5121_generic.c
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -52,6 +52,8 @@ define_machine(mpc5121_generic) {
 	.name			= "MPC5121 generic",
 	.probe			= mpc5121_generic_probe,
 	.init			= mpc512x_init,
+	.init_early		= mpc512x_init_diu,
+	.setup_arch		= mpc512x_setup_diu,
 	.init_IRQ		= mpc512x_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
index b2daca0d148..1ab6d11d0b1 100644
--- a/arch/powerpc/platforms/512x/mpc512x.h
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -16,4 +16,6 @@ extern void __init mpc512x_init(void);
 extern int __init mpc5121_clk_init(void);
 void __init mpc512x_declare_of_platform_devices(void);
 extern void mpc512x_restart(char *cmd);
+extern void mpc512x_init_diu(void);
+extern void mpc512x_setup_diu(void);
 #endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 707e572b7c4..e41ebbdb3e1 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -16,7 +16,11 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/of_platform.h>
+#include <linux/fsl-diu-fb.h>
+#include <linux/bootmem.h>
+#include <sysdev/fsl_soc.h>
 
+#include <asm/cacheflush.h>
 #include <asm/machdep.h>
 #include <asm/ipic.h>
 #include <asm/prom.h>
@@ -54,6 +58,286 @@ void mpc512x_restart(char *cmd)
 		;
 }
 
+struct fsl_diu_shared_fb {
+	u8		gamma[0x300];	/* 32-bit aligned! */
+	struct diu_ad	ad0;		/* 32-bit aligned! */
+	phys_addr_t	fb_phys;
+	size_t		fb_len;
+	bool		in_use;
+};
+
+unsigned int mpc512x_get_pixel_format(unsigned int bits_per_pixel,
+				      int monitor_port)
+{
+	switch (bits_per_pixel) {
+	case 32:
+		return 0x88883316;
+	case 24:
+		return 0x88082219;
+	case 16:
+		return 0x65053118;
+	}
+	return 0x00000400;
+}
+
+void mpc512x_set_gamma_table(int monitor_port, char *gamma_table_base)
+{
+}
+
+void mpc512x_set_monitor_port(int monitor_port)
+{
+}
+
+#define DIU_DIV_MASK	0x000000ff
+void mpc512x_set_pixel_clock(unsigned int pixclock)
+{
+	unsigned long bestval, bestfreq, speed, busfreq;
+	unsigned long minpixclock, maxpixclock, pixval;
+	struct mpc512x_ccm __iomem *ccm;
+	struct device_node *np;
+	u32 temp;
+	long err;
+	int i;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (!np) {
+		pr_err("Can't find clock control module.\n");
+		return;
+	}
+
+	ccm = of_iomap(np, 0);
+	of_node_put(np);
+	if (!ccm) {
+		pr_err("Can't map clock control module reg.\n");
+		return;
+	}
+
+	np = of_find_node_by_type(NULL, "cpu");
+	if (np) {
+		const unsigned int *prop =
+			of_get_property(np, "bus-frequency", NULL);
+
+		of_node_put(np);
+		if (prop) {
+			busfreq = *prop;
+		} else {
+			pr_err("Can't get bus-frequency property\n");
+			return;
+		}
+	} else {
+		pr_err("Can't find 'cpu' node.\n");
+		return;
+	}
+
+	/* Pixel Clock configuration */
+	pr_debug("DIU: Bus Frequency = %lu\n", busfreq);
+	speed = busfreq * 4; /* DIU_DIV ratio is 4 * CSB_CLK / DIU_CLK */
+
+	/* Calculate the pixel clock with the smallest error */
+	/* calculate the following in steps to avoid overflow */
+	pr_debug("DIU pixclock in ps - %d\n", pixclock);
+	temp = (1000000000 / pixclock) * 1000;
+	pixclock = temp;
+	pr_debug("DIU pixclock freq - %u\n", pixclock);
+
+	temp = temp / 20; /* pixclock * 0.05 */
+	pr_debug("deviation = %d\n", temp);
+	minpixclock = pixclock - temp;
+	maxpixclock = pixclock + temp;
+	pr_debug("DIU minpixclock - %lu\n", minpixclock);
+	pr_debug("DIU maxpixclock - %lu\n", maxpixclock);
+	pixval = speed/pixclock;
+	pr_debug("DIU pixval = %lu\n", pixval);
+
+	err = LONG_MAX;
+	bestval = pixval;
+	pr_debug("DIU bestval = %lu\n", bestval);
+
+	bestfreq = 0;
+	for (i = -1; i <= 1; i++) {
+		temp = speed / (pixval+i);
+		pr_debug("DIU test pixval i=%d, pixval=%lu, temp freq. = %u\n",
+			i, pixval, temp);
+		if ((temp < minpixclock) || (temp > maxpixclock))
+			pr_debug("DIU exceeds monitor range (%lu to %lu)\n",
+				minpixclock, maxpixclock);
+		else if (abs(temp - pixclock) < err) {
+			pr_debug("Entered the else if block %d\n", i);
+			err = abs(temp - pixclock);
+			bestval = pixval + i;
+			bestfreq = temp;
+		}
+	}
+
+	pr_debug("DIU chose = %lx\n", bestval);
+	pr_debug("DIU error = %ld\n NomPixClk ", err);
+	pr_debug("DIU: Best Freq = %lx\n", bestfreq);
+	/* Modify DIU_DIV in CCM SCFR1 */
+	temp = in_be32(&ccm->scfr1);
+	pr_debug("DIU: Current value of SCFR1: 0x%08x\n", temp);
+	temp &= ~DIU_DIV_MASK;
+	temp |= (bestval & DIU_DIV_MASK);
+	out_be32(&ccm->scfr1, temp);
+	pr_debug("DIU: Modified value of SCFR1: 0x%08x\n", temp);
+	iounmap(ccm);
+}
+
+ssize_t mpc512x_show_monitor_port(int monitor_port, char *buf)
+{
+	return sprintf(buf, "0 - 5121 LCD\n");
+}
+
+int mpc512x_set_sysfs_monitor_port(int val)
+{
+	return 0;
+}
+
+static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
+
+#if defined(CONFIG_FB_FSL_DIU) || \
+    defined(CONFIG_FB_FSL_DIU_MODULE)
+static inline void mpc512x_free_bootmem(struct page *page)
+{
+	__ClearPageReserved(page);
+	BUG_ON(PageTail(page));
+	BUG_ON(atomic_read(&page->_count) > 1);
+	atomic_set(&page->_count, 1);
+	__free_page(page);
+	totalram_pages++;
+}
+
+void mpc512x_release_bootmem(void)
+{
+	unsigned long addr = diu_shared_fb.fb_phys & PAGE_MASK;
+	unsigned long size = diu_shared_fb.fb_len;
+	unsigned long start, end;
+
+	if (diu_shared_fb.in_use) {
+		start = PFN_UP(addr);
+		end = PFN_DOWN(addr + size);
+
+		for (; start < end; start++)
+			mpc512x_free_bootmem(pfn_to_page(start));
+
+		diu_shared_fb.in_use = false;
+	}
+	diu_ops.release_bootmem	= NULL;
+}
+#endif
+
+/*
+ * Check if DIU was pre-initialized. If so, perform steps
+ * needed to continue displaying through the whole boot process.
+ * Move area descriptor and gamma table elsewhere, they are
+ * destroyed by bootmem allocator otherwise. The frame buffer
+ * address range will be reserved in setup_arch() after bootmem
+ * allocator is up.
+ */
+void __init mpc512x_init_diu(void)
+{
+	struct device_node *np;
+	struct diu __iomem *diu_reg;
+	phys_addr_t desc;
+	void __iomem *vaddr;
+	unsigned long mode, pix_fmt, res, bpp;
+	unsigned long dst;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-diu");
+	if (!np) {
+		pr_err("No DIU node\n");
+		return;
+	}
+
+	diu_reg = of_iomap(np, 0);
+	of_node_put(np);
+	if (!diu_reg) {
+		pr_err("Can't map DIU\n");
+		return;
+	}
+
+	mode = in_be32(&diu_reg->diu_mode);
+	if (mode != MFB_MODE1) {
+		pr_info("%s: DIU OFF\n", __func__);
+		goto out;
+	}
+
+	desc = in_be32(&diu_reg->desc[0]);
+	vaddr = ioremap(desc, sizeof(struct diu_ad));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		goto out;
+	}
+	memcpy(&diu_shared_fb.ad0, vaddr, sizeof(struct diu_ad));
+	/* flush fb area descriptor */
+	dst = (unsigned long)&diu_shared_fb.ad0;
+	flush_dcache_range(dst, dst + sizeof(struct diu_ad) - 1);
+
+	res = in_be32(&diu_reg->disp_size);
+	pix_fmt = in_le32(vaddr);
+	bpp = ((pix_fmt >> 16) & 0x3) + 1;
+	diu_shared_fb.fb_phys = in_le32(vaddr + 4);
+	diu_shared_fb.fb_len = ((res & 0xfff0000) >> 16) * (res & 0xfff) * bpp;
+	diu_shared_fb.in_use = true;
+	iounmap(vaddr);
+
+	desc = in_be32(&diu_reg->gamma);
+	vaddr = ioremap(desc, sizeof(diu_shared_fb.gamma));
+	if (!vaddr) {
+		pr_err("Can't map DIU area desc.\n");
+		diu_shared_fb.in_use = false;
+		goto out;
+	}
+	memcpy(&diu_shared_fb.gamma, vaddr, sizeof(diu_shared_fb.gamma));
+	/* flush gamma table */
+	dst = (unsigned long)&diu_shared_fb.gamma;
+	flush_dcache_range(dst, dst + sizeof(diu_shared_fb.gamma) - 1);
+
+	iounmap(vaddr);
+	out_be32(&diu_reg->gamma, virt_to_phys(&diu_shared_fb.gamma));
+	out_be32(&diu_reg->desc[1], 0);
+	out_be32(&diu_reg->desc[2], 0);
+	out_be32(&diu_reg->desc[0], virt_to_phys(&diu_shared_fb.ad0));
+
+out:
+	iounmap(diu_reg);
+}
+
+void __init mpc512x_setup_diu(void)
+{
+	int ret;
+
+	/*
+	 * We do not allocate and configure new area for bitmap buffer
+	 * because it would requere copying bitmap data (splash image)
+	 * and so negatively affect boot time. Instead we reserve the
+	 * already configured frame buffer area so that it won't be
+	 * destroyed. The starting address of the area to reserve and
+	 * also it's length is passed to reserve_bootmem(). It will be
+	 * freed later on first open of fbdev, when splash image is not
+	 * needed any more.
+	 */
+	if (diu_shared_fb.in_use) {
+		ret = reserve_bootmem(diu_shared_fb.fb_phys,
+				      diu_shared_fb.fb_len,
+				      BOOTMEM_EXCLUSIVE);
+		if (ret) {
+			pr_err("%s: reserve bootmem failed\n", __func__);
+			diu_shared_fb.in_use = false;
+		}
+	}
+
+#if defined(CONFIG_FB_FSL_DIU) || \
+    defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.get_pixel_format	= mpc512x_get_pixel_format;
+	diu_ops.set_gamma_table		= mpc512x_set_gamma_table;
+	diu_ops.set_monitor_port	= mpc512x_set_monitor_port;
+	diu_ops.set_pixel_clock		= mpc512x_set_pixel_clock;
+	diu_ops.show_monitor_port	= mpc512x_show_monitor_port;
+	diu_ops.set_sysfs_monitor_port	= mpc512x_set_sysfs_monitor_port;
+	diu_ops.release_bootmem		= mpc512x_release_bootmem;
+#endif
+}
+
 void __init mpc512x_init_IRQ(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c
new file mode 100644
index 00000000000..0575e858291
--- /dev/null
+++ b/arch/powerpc/platforms/512x/pdm360ng.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2010 DENX Software Engineering
+ *
+ * Anatolij Gustschin, <agust@denx.de>
+ *
+ * PDM360NG board setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+
+#include "mpc512x.h"
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+    defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/interrupt.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/spi.h>
+#include <linux/notifier.h>
+
+static void *pdm360ng_gpio_base;
+
+static int pdm360ng_get_pendown_state(void)
+{
+	u32 reg;
+
+	reg = in_be32(pdm360ng_gpio_base + 0xc);
+	if (reg & 0x40)
+		setbits32(pdm360ng_gpio_base + 0xc, 0x40);
+
+	reg = in_be32(pdm360ng_gpio_base + 0x8);
+
+	/* return 1 if pen is down */
+	return (reg & 0x40) == 0;
+}
+
+static struct ads7846_platform_data pdm360ng_ads7846_pdata = {
+	.model			= 7845,
+	.get_pendown_state	= pdm360ng_get_pendown_state,
+	.irq_flags		= IRQF_TRIGGER_LOW,
+};
+
+static int __init pdm360ng_penirq_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio");
+	if (!np) {
+		pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__);
+		return -ENODEV;
+	}
+
+	pdm360ng_gpio_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!pdm360ng_gpio_base) {
+		pr_err("%s: Can't map gpio regs.\n", __func__);
+		return -ENODEV;
+	}
+	out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff);
+	setbits32(pdm360ng_gpio_base + 0x18, 0x2000);
+	setbits32(pdm360ng_gpio_base + 0x10, 0x40);
+
+	return 0;
+}
+
+static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb,
+					unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if ((event == BUS_NOTIFY_ADD_DEVICE) &&
+	    of_device_is_compatible(dev->of_node, "ti,ads7846")) {
+		dev->platform_data = &pdm360ng_ads7846_pdata;
+		return NOTIFY_OK;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block pdm360ng_touchscreen_nb = {
+	.notifier_call = pdm360ng_touchscreen_notifier_call,
+};
+
+static void __init pdm360ng_touchscreen_init(void)
+{
+	if (pdm360ng_penirq_init())
+		return;
+
+	bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb);
+}
+#else
+static inline void __init pdm360ng_touchscreen_init(void)
+{
+}
+#endif /* CONFIG_TOUCHSCREEN_ADS7846 */
+
+void __init pdm360ng_init(void)
+{
+	mpc512x_init();
+	pdm360ng_touchscreen_init();
+}
+
+static int __init pdm360ng_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "ifm,pdm360ng");
+}
+
+define_machine(pdm360ng) {
+	.name			= "PDM360NG",
+	.probe			= pdm360ng_probe,
+	.setup_arch		= mpc512x_setup_diu,
+	.init			= pdm360ng_init,
+	.init_early		= mpc512x_init_diu,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= mpc512x_restart,
+};
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 6d584f4e3c9..de55bc0584b 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
 #include <asm/time.h>
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
index b5c753db125..80234e5921f 100644
--- a/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -216,9 +216,6 @@ static int lite5200_pm_enter(suspend_state_t state)
 
 	lite5200_restore_regs();
 
-	/* restart jiffies */
-	wakeup_decrementer();
-
 	iounmap(mbar);
 	return 0;
 }
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index a46bad0c233..6e905314ad5 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -12,9 +12,11 @@
 
 #undef DEBUG
 
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/of_platform.h>
+#include <linux/of_gpio.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/mpc52xx.h>
@@ -82,6 +84,14 @@ mpc5200_setup_xlb_arbiter(void)
 	iounmap(xlb);
 }
 
+/*
+ * This variable is mapped in mpc52xx_map_common_devices and
+ * used in mpc5200_psc_ac97_gpio_reset().
+ */
+static DEFINE_SPINLOCK(gpio_lock);
+struct mpc52xx_gpio __iomem *simple_gpio;
+struct mpc52xx_gpio_wkup __iomem *wkup_gpio;
+
 /**
  * mpc52xx_declare_of_platform_devices: register internal devices and children
  *					of the localplus bus to the of_platform
@@ -109,6 +119,15 @@ static struct of_device_id mpc52xx_cdm_ids[] __initdata = {
 	{ .compatible = "mpc5200-cdm", }, /* old */
 	{}
 };
+static const struct of_device_id mpc52xx_gpio_simple[] = {
+	{ .compatible = "fsl,mpc5200-gpio", },
+	{}
+};
+static const struct of_device_id mpc52xx_gpio_wkup[] = {
+	{ .compatible = "fsl,mpc5200-gpio-wkup", },
+	{}
+};
+
 
 /**
  * mpc52xx_map_common_devices: iomap devices required by common code
@@ -135,6 +154,16 @@ mpc52xx_map_common_devices(void)
 	np = of_find_matching_node(NULL, mpc52xx_cdm_ids);
 	mpc52xx_cdm = of_iomap(np, 0);
 	of_node_put(np);
+
+	/* simple_gpio registers */
+	np = of_find_matching_node(NULL, mpc52xx_gpio_simple);
+	simple_gpio = of_iomap(np, 0);
+	of_node_put(np);
+
+	/* wkup_gpio registers */
+	np = of_find_matching_node(NULL, mpc52xx_gpio_wkup);
+	wkup_gpio = of_iomap(np, 0);
+	of_node_put(np);
 }
 
 /**
@@ -233,3 +262,80 @@ mpc52xx_restart(char *cmd)
 
 	while (1);
 }
+
+#define PSC1_RESET     0x1
+#define PSC1_SYNC      0x4
+#define PSC1_SDATA_OUT 0x1
+#define PSC2_RESET     0x2
+#define PSC2_SYNC      (0x4<<4)
+#define PSC2_SDATA_OUT (0x1<<4)
+#define MPC52xx_GPIO_PSC1_MASK 0x7
+#define MPC52xx_GPIO_PSC2_MASK (0x7<<4)
+
+/**
+ * mpc5200_psc_ac97_gpio_reset: Use gpio pins to reset the ac97 bus
+ *
+ * @psc: psc number to reset (only psc 1 and 2 support ac97)
+ */
+int mpc5200_psc_ac97_gpio_reset(int psc_number)
+{
+	unsigned long flags;
+	u32 gpio;
+	u32 mux;
+	int out;
+	int reset;
+	int sync;
+
+	if ((!simple_gpio) || (!wkup_gpio))
+		return -ENODEV;
+
+	switch (psc_number) {
+	case 0:
+		reset   = PSC1_RESET;           /* AC97_1_RES */
+		sync    = PSC1_SYNC;            /* AC97_1_SYNC */
+		out     = PSC1_SDATA_OUT;       /* AC97_1_SDATA_OUT */
+		gpio    = MPC52xx_GPIO_PSC1_MASK;
+		break;
+	case 1:
+		reset   = PSC2_RESET;           /* AC97_2_RES */
+		sync    = PSC2_SYNC;            /* AC97_2_SYNC */
+		out     = PSC2_SDATA_OUT;       /* AC97_2_SDATA_OUT */
+		gpio    = MPC52xx_GPIO_PSC2_MASK;
+		break;
+	default:
+		pr_err(__FILE__ ": Unable to determine PSC, no ac97 "
+		       "cold-reset will be performed\n");
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* Reconfiure pin-muxing to gpio */
+	mux = in_be32(&simple_gpio->port_config);
+	out_be32(&simple_gpio->port_config, mux & (~gpio));
+
+	/* enable gpio pins for output */
+	setbits8(&wkup_gpio->wkup_gpioe, reset);
+	setbits32(&simple_gpio->simple_gpioe, sync | out);
+
+	setbits8(&wkup_gpio->wkup_ddr, reset);
+	setbits32(&simple_gpio->simple_ddr, sync | out);
+
+	/* Assert cold reset */
+	clrbits32(&simple_gpio->simple_dvo, sync | out);
+	clrbits8(&wkup_gpio->wkup_dvo, reset);
+
+	/* wait at lease 1 us */
+	udelay(2);
+
+	/* Deassert reset */
+	setbits8(&wkup_gpio->wkup_dvo, reset);
+
+	/* Restore pin-muxing */
+	out_be32(&simple_gpio->port_config, mux);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(mpc5200_psc_ac97_gpio_reset);
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index ca5305a5bd6..0dad9a935eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -147,26 +147,25 @@ mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	return 0;
 }
 
-static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev,
+static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev,
 					const struct of_device_id *match)
 {
 	struct mpc52xx_gpiochip *chip;
 	struct mpc52xx_gpio_wkup __iomem *regs;
-	struct of_gpio_chip *ofchip;
+	struct gpio_chip *gc;
 	int ret;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
 
-	ofchip = &chip->mmchip.of_gc;
+	gc = &chip->mmchip.gc;
 
-	ofchip->gpio_cells          = 2;
-	ofchip->gc.ngpio            = 8;
-	ofchip->gc.direction_input  = mpc52xx_wkup_gpio_dir_in;
-	ofchip->gc.direction_output = mpc52xx_wkup_gpio_dir_out;
-	ofchip->gc.get              = mpc52xx_wkup_gpio_get;
-	ofchip->gc.set              = mpc52xx_wkup_gpio_set;
+	gc->ngpio            = 8;
+	gc->direction_input  = mpc52xx_wkup_gpio_dir_in;
+	gc->direction_output = mpc52xx_wkup_gpio_dir_out;
+	gc->get              = mpc52xx_wkup_gpio_get;
+	gc->set              = mpc52xx_wkup_gpio_set;
 
 	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
@@ -180,7 +179,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev,
 	return 0;
 }
 
-static int mpc52xx_gpiochip_remove(struct of_device *ofdev)
+static int mpc52xx_gpiochip_remove(struct platform_device *ofdev)
 {
 	return -EBUSY;
 }
@@ -311,11 +310,11 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	return 0;
 }
 
-static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev,
+static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev,
 					const struct of_device_id *match)
 {
 	struct mpc52xx_gpiochip *chip;
-	struct of_gpio_chip *ofchip;
+	struct gpio_chip *gc;
 	struct mpc52xx_gpio __iomem *regs;
 	int ret;
 
@@ -323,14 +322,13 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev,
 	if (!chip)
 		return -ENOMEM;
 
-	ofchip = &chip->mmchip.of_gc;
+	gc = &chip->mmchip.gc;
 
-	ofchip->gpio_cells          = 2;
-	ofchip->gc.ngpio            = 32;
-	ofchip->gc.direction_input  = mpc52xx_simple_gpio_dir_in;
-	ofchip->gc.direction_output = mpc52xx_simple_gpio_dir_out;
-	ofchip->gc.get              = mpc52xx_simple_gpio_get;
-	ofchip->gc.set              = mpc52xx_simple_gpio_set;
+	gc->ngpio            = 32;
+	gc->direction_input  = mpc52xx_simple_gpio_dir_in;
+	gc->direction_output = mpc52xx_simple_gpio_dir_out;
+	gc->get              = mpc52xx_simple_gpio_get;
+	gc->set              = mpc52xx_simple_gpio_set;
 
 	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index 46c93578cbf..fea833e18ad 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -78,7 +78,7 @@ MODULE_LICENSE("GPL");
  * @dev: pointer to device structure
  * @regs: virtual address of GPT registers
  * @lock: spinlock to coordinate between different functions.
- * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled
+ * @gc: gpio_chip instance structure; used when GPIO is enabled
  * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
  * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates
  *   if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates
@@ -94,7 +94,7 @@ struct mpc52xx_gpt_priv {
 	u8 wdt_mode;
 
 #if defined(CONFIG_GPIOLIB)
-	struct of_gpio_chip of_gc;
+	struct gpio_chip gc;
 #endif
 };
 
@@ -280,7 +280,7 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
 #if defined(CONFIG_GPIOLIB)
 static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc)
 {
-	return container_of(to_of_gpio_chip(gc), struct mpc52xx_gpt_priv,of_gc);
+	return container_of(gc, struct mpc52xx_gpt_priv, gc);
 }
 
 static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -336,28 +336,25 @@ mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
 	if (!of_find_property(node, "gpio-controller", NULL))
 		return;
 
-	gpt->of_gc.gc.label = kstrdup(node->full_name, GFP_KERNEL);
-	if (!gpt->of_gc.gc.label) {
+	gpt->gc.label = kstrdup(node->full_name, GFP_KERNEL);
+	if (!gpt->gc.label) {
 		dev_err(gpt->dev, "out of memory\n");
 		return;
 	}
 
-	gpt->of_gc.gpio_cells = 2;
-	gpt->of_gc.gc.ngpio = 1;
-	gpt->of_gc.gc.direction_input  = mpc52xx_gpt_gpio_dir_in;
-	gpt->of_gc.gc.direction_output = mpc52xx_gpt_gpio_dir_out;
-	gpt->of_gc.gc.get = mpc52xx_gpt_gpio_get;
-	gpt->of_gc.gc.set = mpc52xx_gpt_gpio_set;
-	gpt->of_gc.gc.base = -1;
-	gpt->of_gc.xlate = of_gpio_simple_xlate;
-	node->data = &gpt->of_gc;
-	of_node_get(node);
+	gpt->gc.ngpio = 1;
+	gpt->gc.direction_input  = mpc52xx_gpt_gpio_dir_in;
+	gpt->gc.direction_output = mpc52xx_gpt_gpio_dir_out;
+	gpt->gc.get = mpc52xx_gpt_gpio_get;
+	gpt->gc.set = mpc52xx_gpt_gpio_set;
+	gpt->gc.base = -1;
+	gpt->gc.of_node = node;
 
 	/* Setup external pin in GPIO mode */
 	clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
 			MPC52xx_GPT_MODE_MS_GPIO);
 
-	rc = gpiochip_add(&gpt->of_gc.gc);
+	rc = gpiochip_add(&gpt->gc);
 	if (rc)
 		dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc);
 
@@ -723,7 +720,7 @@ static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
 /* ---------------------------------------------------------------------
  * of_platform bus binding code
  */
-static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
+static int __devinit mpc52xx_gpt_probe(struct platform_device *ofdev,
 				       const struct of_device_id *match)
 {
 	struct mpc52xx_gpt_priv *gpt;
@@ -769,7 +766,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev,
 	return 0;
 }
 
-static int mpc52xx_gpt_remove(struct of_device *ofdev)
+static int mpc52xx_gpt_remove(struct platform_device *ofdev)
 {
 	return -EBUSY;
 }
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
index e86aec64450..f4ac213c89c 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
@@ -436,8 +436,8 @@ void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req)
 }
 EXPORT_SYMBOL(mpc52xx_lpbfifo_abort);
 
-static int __devinit
-mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit mpc52xx_lpbfifo_probe(struct platform_device *op,
+					   const struct of_device_id *match)
 {
 	struct resource res;
 	int rc = -ENOMEM;
@@ -507,7 +507,7 @@ mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match)
 }
 
 
-static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op)
+static int __devexit mpc52xx_lpbfifo_remove(struct platform_device *op)
 {
 	if (lpbfifo.dev != &op->dev)
 		return 0;
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index 76722532bd9..568cef63627 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -171,9 +171,6 @@ int mpc52xx_pm_enter(suspend_state_t state)
 	/* restore SRAM */
 	memcpy(sram, saved_sram, sram_size);
 
-	/* restart jiffies */
-	wakeup_decrementer();
-
 	/* reenable interrupts in PIC */
 	out_be32(&intr->main_mask, intr_main_mask);
 
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index 9f2e52b36f9..1565e0446dc 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -111,7 +111,7 @@ static struct mdiobb_ctrl ep8248e_mdio_ctrl = {
 	.ops = &ep8248e_mdio_ops,
 };
 
-static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
+static int __devinit ep8248e_mdio_probe(struct platform_device *ofdev,
                                         const struct of_device_id *match)
 {
 	struct mii_bus *bus;
@@ -154,7 +154,7 @@ err_free_bus:
 	return ret;
 }
 
-static int ep8248e_mdio_remove(struct of_device *ofdev)
+static int ep8248e_mdio_remove(struct platform_device *ofdev)
 {
 	BUG();
 	return 0;
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index f49a2548c5f..021763a32c2 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -9,6 +9,14 @@ menuconfig PPC_83xx
 
 if PPC_83xx
 
+config MPC830x_RDB
+	bool "Freescale MPC830x RDB"
+	select DEFAULT_UIMAGE
+	select PPC_MPC831x
+	select FSL_GTM
+	help
+	  This option enables support for the MPC8308 RDB board.
+
 config MPC831x_RDB
 	bool "Freescale MPC831x RDB"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index e139c36572e..6e8bbbbcfdf 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -4,6 +4,7 @@
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
+obj-$(CONFIG_MPC830x_RDB)	+= mpc830x_rdb.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
index d119a7c1c17..70798ac911e 100644
--- a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
+++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
@@ -35,9 +35,8 @@
 
 struct mcu {
 	struct mutex lock;
-	struct device_node *np;
 	struct i2c_client *client;
-	struct of_gpio_chip of_gc;
+	struct gpio_chip gc;
 	u8 reg_ctrl;
 };
 
@@ -56,8 +55,7 @@ static void mcu_power_off(void)
 
 static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
-	struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
-	struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
+	struct mcu *mcu = container_of(gc, struct mcu, gc);
 	u8 bit = 1 << (4 + gpio);
 
 	mutex_lock(&mcu->lock);
@@ -79,9 +77,7 @@ static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 static int mcu_gpiochip_add(struct mcu *mcu)
 {
 	struct device_node *np;
-	struct of_gpio_chip *of_gc = &mcu->of_gc;
-	struct gpio_chip *gc = &of_gc->gc;
-	int ret;
+	struct gpio_chip *gc = &mcu->gc;
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
 	if (!np)
@@ -94,32 +90,14 @@ static int mcu_gpiochip_add(struct mcu *mcu)
 	gc->base = -1;
 	gc->set = mcu_gpio_set;
 	gc->direction_output = mcu_gpio_dir_out;
-	of_gc->gpio_cells = 2;
-	of_gc->xlate = of_gpio_simple_xlate;
+	gc->of_node = np;
 
-	np->data = of_gc;
-	mcu->np = np;
-
-	/*
-	 * We don't want to lose the node, its ->data and ->full_name...
-	 * So, if succeeded, we don't put the node here.
-	 */
-	ret = gpiochip_add(gc);
-	if (ret)
-		of_node_put(np);
-	return ret;
+	return gpiochip_add(gc);
 }
 
 static int mcu_gpiochip_remove(struct mcu *mcu)
 {
-	int ret;
-
-	ret = gpiochip_remove(&mcu->of_gc.gc);
-	if (ret)
-		return ret;
-	of_node_put(mcu->np);
-
-	return 0;
+	return gpiochip_remove(&mcu->gc);
 }
 
 static int __devinit mcu_probe(struct i2c_client *client,
@@ -182,10 +160,16 @@ static const struct i2c_device_id mcu_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mcu_ids);
 
+static struct of_device_id mcu_of_match_table[] __devinitdata = {
+	{ .compatible = "fsl,mcu-mpc8349emitx", },
+	{ },
+};
+
 static struct i2c_driver mcu_driver = {
 	.driver = {
 		.name = "mcu-mpc8349emitx",
 		.owner = THIS_MODULE,
+		.of_match_table = mcu_of_match_table,
 	},
 	.probe = mcu_probe,
 	.remove	= __devexit_p(mcu_remove),
diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
new file mode 100644
index 00000000000..ac102ee9abe
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c
@@ -0,0 +1,94 @@
+/*
+ * arch/powerpc/platforms/83xx/mpc830x_rdb.c
+ *
+ * Description: MPC830x RDB board specific routines.
+ * This file is based on mpc831x_rdb.c
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved.
+ * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include "mpc83xx.h"
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc830x_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
+		mpc83xx_add_bridge(np);
+#endif
+	mpc831x_usb_cfg();
+}
+
+static void __init mpc830x_rdb_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc830x_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MPC8308RDB") ||
+	       of_flat_dt_is_compatible(root, "fsl,mpc8308rdb");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+
+define_machine(mpc830x_rdb) {
+	.name			= "MPC830x RDB",
+	.probe			= mpc830x_rdb_probe,
+	.setup_arch		= mpc830x_rdb_setup_arch,
+	.init_IRQ		= mpc830x_rdb_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index ebe6c353720..75ae77f1af6 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -99,7 +99,7 @@ struct pmc_type {
 	int has_deep_sleep;
 };
 
-static struct of_device *pmc_dev;
+static struct platform_device *pmc_dev;
 static int has_deep_sleep, deep_sleeping;
 static int pmc_irq;
 static struct mpc83xx_pmc __iomem *pmc_regs;
@@ -318,7 +318,7 @@ static struct platform_suspend_ops mpc83xx_suspend_ops = {
 	.end = mpc83xx_suspend_end,
 };
 
-static int pmc_probe(struct of_device *ofdev,
+static int pmc_probe(struct platform_device *ofdev,
                      const struct of_device_id *match)
 {
 	struct device_node *np = ofdev->dev.of_node;
@@ -396,7 +396,7 @@ out:
 	return ret;
 }
 
-static int pmc_remove(struct of_device *ofdev)
+static int pmc_remove(struct platform_device *ofdev)
 {
 	return -EPERM;
 };
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 3a2ade2e443..bea1f5905ad 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -65,6 +65,14 @@ config MPC85xx_RDB
 	help
 	  This option enables support for the MPC85xx RDB (P2020 RDB) board
 
+config P1022_DS
+	bool "Freescale P1022 DS"
+	select DEFAULT_UIMAGE
+	select CONFIG_PHYS_64BIT	# The DTS has 36-bit addresses
+	select SWIOTLB
+	help
+	  This option enables support for the Freescale P1022DS reference board.
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 387c128f2c8..a2ec3f8f4d0 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
+obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 494513682d7..da64be19d09 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -158,51 +158,108 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
 extern void __init mpc85xx_smp_init(void);
 #endif
 
-static void __init mpc85xx_mds_setup_arch(void)
+#ifdef CONFIG_QUICC_ENGINE
+static struct of_device_id mpc85xx_qe_ids[] __initdata = {
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ },
+};
+
+static void __init mpc85xx_publish_qe_devices(void)
 {
 	struct device_node *np;
-	static u8 __iomem *bcsr_regs = NULL;
-#ifdef CONFIG_PCI
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
 
-	if (ppc_md.progress)
-		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
+}
+
+static void __init mpc85xx_mds_reset_ucc_phys(void)
+{
+	struct device_node *np;
+	static u8 __iomem *bcsr_regs;
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != NULL) {
-		struct resource res;
+	if (!np)
+		return;
 
-		of_address_to_resource(np, 0, &res);
-		bcsr_regs = ioremap(res.start, res.end - res.start +1);
-		of_node_put(np);
-	}
+	bcsr_regs = of_iomap(np, 0);
+	of_node_put(np);
+	if (!bcsr_regs)
+		return;
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
+	if (machine_is(mpc8568_mds)) {
+#define BCSR_UCC1_GETH_EN	(0x1 << 7)
+#define BCSR_UCC2_GETH_EN	(0x1 << 7)
+#define BCSR_UCC1_MODE_MSK	(0x3 << 4)
+#define BCSR_UCC2_MODE_MSK	(0x3 << 0)
 
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
+		/* Turn off UCC1 & UCC2 */
+		clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+		clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+
+		/* Mode is RGMII, all bits clear */
+		clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+					 BCSR_UCC2_MODE_MSK);
+
+		/* Turn UCC1 & UCC2 on */
+		setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+		setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+	} else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST	(0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+#define BCSR_UCC_RGMII		(0x1 << 6)
+#define BCSR_UCC_RTBI		(0x1 << 5)
+		/*
+		 * U-Boot mangles interrupt polarity for Marvell PHYs,
+		 * so reset built-in and UEM Marvell PHYs, this puts
+		 * the PHYs into their normal state.
+		 */
+		clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+		setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+		setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+		clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+		for (np = NULL; (np = of_find_compatible_node(np,
+						"network",
+						"ucc_geth")) != NULL;) {
+			const unsigned int *prop;
+			int ucc_num;
+
+			prop = of_get_property(np, "cell-index", NULL);
+			if (prop == NULL)
+				continue;
+
+			ucc_num = *prop - 1;
+
+			prop = of_get_property(np, "phy-connection-type", NULL);
+			if (prop == NULL)
+				continue;
+
+			if (strcmp("rtbi", (const char *)prop) == 0)
+				clrsetbits_8(&bcsr_regs[7 + ucc_num],
+					BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 		}
+	} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+		/* Reset Micrel PHY */
+		clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+		setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 	}
-#endif
 
-#ifdef CONFIG_SMP
-	mpc85xx_smp_init();
-#endif
+	iounmap(bcsr_regs);
+}
+
+static void __init mpc85xx_mds_qe_init(void)
+{
+	struct device_node *np;
 
-#ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
 		np = of_find_node_by_name(NULL, "qe");
@@ -210,6 +267,11 @@ static void __init mpc85xx_mds_setup_arch(void)
 			return;
 	}
 
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
 	qe_reset();
 	of_node_put(np);
 
@@ -224,70 +286,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 			par_io_of_config(ucc);
 	}
 
-	if (bcsr_regs) {
-		if (machine_is(mpc8568_mds)) {
-#define BCSR_UCC1_GETH_EN	(0x1 << 7)
-#define BCSR_UCC2_GETH_EN	(0x1 << 7)
-#define BCSR_UCC1_MODE_MSK	(0x3 << 4)
-#define BCSR_UCC2_MODE_MSK	(0x3 << 0)
-
-			/* Turn off UCC1 & UCC2 */
-			clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-			clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
-
-			/* Mode is RGMII, all bits clear */
-			clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
-						 BCSR_UCC2_MODE_MSK);
-
-			/* Turn UCC1 & UCC2 on */
-			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
-			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
-		} else if (machine_is(mpc8569_mds)) {
-#define BCSR7_UCC12_GETHnRST	(0x1 << 2)
-#define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
-#define BCSR_UCC_RGMII		(0x1 << 6)
-#define BCSR_UCC_RTBI		(0x1 << 5)
-			/*
-			 * U-Boot mangles interrupt polarity for Marvell PHYs,
-			 * so reset built-in and UEM Marvell PHYs, this puts
-			 * the PHYs into their normal state.
-			 */
-			clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
-			setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
-
-			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
-			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
-
-			for (np = NULL; (np = of_find_compatible_node(np,
-							"network",
-							"ucc_geth")) != NULL;) {
-				const unsigned int *prop;
-				int ucc_num;
-
-				prop = of_get_property(np, "cell-index", NULL);
-				if (prop == NULL)
-					continue;
-
-				ucc_num = *prop - 1;
-
-				prop = of_get_property(np, "phy-connection-type", NULL);
-				if (prop == NULL)
-					continue;
-
-				if (strcmp("rtbi", (const char *)prop) == 0)
-					clrsetbits_8(&bcsr_regs[7 + ucc_num],
-						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
-			}
-
-		} else if (machine_is(p1021_mds)) {
-#define BCSR11_ENET_MICRST     (0x1 << 5)
-			/* Reset Micrel PHY */
-			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
-			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
-		}
-
-		iounmap(bcsr_regs);
-	}
+	mpc85xx_mds_reset_ucc_phys();
 
 	if (machine_is(p1021_mds)) {
 #define MPC85xx_PMUXCR_OFFSET           0x60
@@ -322,8 +321,72 @@ static void __init mpc85xx_mds_setup_arch(void)
 		}
 
 	}
+}
+
+static void __init mpc85xx_mds_qeic_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	of_node_put(np);
+}
+#else
+static void __init mpc85xx_publish_qe_devices(void) { }
+static void __init mpc85xx_mds_qe_init(void) { }
+static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
 
+static void __init mpc85xx_mds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct pci_controller *hose;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0x8000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
+		}
+	}
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+	mpc85xx_mds_qe_init();
+
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
@@ -369,8 +432,6 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
@@ -382,8 +443,6 @@ static struct of_device_id p1021_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{},
 };
@@ -395,16 +454,16 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
-	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
+	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
 
 static int __init p1021_publish_devices(void)
 {
-	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, p1021_ids, NULL);
+	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
@@ -441,21 +500,7 @@ static void __init mpc85xx_mds_pic_init(void)
 	of_node_put(np);
 
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	if (machine_is(p1021_mds))
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-	else
-		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
+	mpc85xx_mds_qeic_init();
 }
 
 static int __init mpc85xx_mds_probe(void)
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
new file mode 100644
index 00000000000..e1467c93745
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -0,0 +1,148 @@
+/*
+ * P1022DS board specific routines
+ *
+ * Authors: Travis Wheatley <travis.wheatley@freescale.com>
+ *          Dave Liu <daveliu@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is taken from the Freescale P1022DS BSP, with modifications:
+ * 1) No DIU support (pending rewrite of DIU code)
+ * 2) No AMP support
+ * 3) No PCI endpoint support
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/lmb.h>
+
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init p1022_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		pr_err("Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		pr_err("Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+		MPIC_PRIMARY | MPIC_WANTS_RESET |
+		MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+		MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init p1022_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+	if (ppc_md.progress)
+		ppc_md.progress("p1022_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
+		struct resource rsrc;
+		struct pci_controller *hose;
+
+		of_address_to_resource(np, 0, &rsrc);
+
+		if ((rsrc.start & 0xfffff) == 0x8000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+
+		hose = pci_find_hose_for_OF_device(np);
+		max = min(max, hose->dma_window_base_cur +
+			  hose->dma_window_size);
+	}
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+
+	pr_info("Freescale P1022 DS reference board\n");
+}
+
+static struct of_device_id __initdata p1022_ds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
+static int __init p1022_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
+}
+machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+
+machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p1022_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,p1022ds");
+}
+
+define_machine(p1022_ds) {
+	.name			= "P1022 DS",
+	.probe			= p1022_ds_probe,
+	.setup_arch		= p1022_ds_setup_arch,
+	.init_IRQ		= p1022_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index a15f582300d..a6b106557be 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/kexec.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -24,6 +25,7 @@
 #include <asm/dbell.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/mpic.h>
 
 extern void __early_start(void);
 
@@ -99,12 +101,70 @@ static void __init
 smp_85xx_setup_cpu(int cpu_nr)
 {
 	mpic_setup_this_cpu();
+	if (cpu_has_feature(CPU_FTR_DBELL))
+		doorbell_setup_this_cpu();
 }
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_KEXEC
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+#endif
 };
 
+#ifdef CONFIG_KEXEC
+static int kexec_down_cpus = 0;
+
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	mpic_teardown_this_cpu(1);
+
+	/* When crashing, this gets called on all CPU's we only
+	 * take down the non-boot cpus */
+	if (smp_processor_id() != boot_cpuid)
+	{
+		local_irq_disable();
+		kexec_down_cpus++;
+
+		while (1);
+	}
+}
+
+static void mpc85xx_smp_kexec_down(void *arg)
+{
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0,1);
+}
+
+static void mpc85xx_smp_machine_kexec(struct kimage *image)
+{
+	int timeout = 2000;
+	int i;
+
+	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
+
+	smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
+
+	while ( (kexec_down_cpus != (num_online_cpus() - 1)) &&
+		( timeout > 0 ) )
+	{
+		timeout--;
+	}
+
+	if ( !timeout )
+		printk(KERN_ERR "Unable to bring down secondary cpu(s)");
+
+	for (i = 0; i < num_present_cpus(); i++)
+	{
+		if ( i == smp_processor_id() ) continue;
+		mpic_reset_core(i);
+	}
+
+	default_machine_kexec(image);
+}
+#endif /* CONFIG_KEXEC */
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -117,9 +177,14 @@ void __init mpc85xx_smp_init(void)
 	}
 
 	if (cpu_has_feature(CPU_FTR_DBELL))
-		smp_85xx_ops.message_pass = smp_dbell_message_pass;
+		smp_85xx_ops.message_pass = doorbell_message_pass;
 
 	BUG_ON(!smp_85xx_ops.message_pass);
 
 	smp_ops = &smp_85xx_ops;
+
+#ifdef CONFIG_KEXEC
+	ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down;
+	ppc_md.machine_kexec = mpc85xx_smp_machine_kexec;
+#endif
 }
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 5b0ab9966e9..8f29bbce536 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
+static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(tqm85xx))
+		return;
+
+	dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n");
+
+	/*
+	 * Enable P2CCLK bit in system control register
+	 * to enable CLOCK output to power chip
+	 */
+	pci_read_config_dword(pdev, 0x80, &val);
+	pci_write_config_dword(pdev, 0x80, val | (1 << 27));
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
+		tqm85xx_ti1520_fixup);
+
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c
index b8cb08dbd89..4ff7b1e7bba 100644
--- a/arch/powerpc/platforms/86xx/gef_gpio.c
+++ b/arch/powerpc/platforms/86xx/gef_gpio.c
@@ -118,12 +118,12 @@ static int __init gef_gpio_init(void)
 		}
 
 		/* Setup pointers to chip functions */
-		gef_gpio_chip->of_gc.gpio_cells = 2;
-		gef_gpio_chip->of_gc.gc.ngpio = 19;
-		gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
-		gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
-		gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
-		gef_gpio_chip->of_gc.gc.set = gef_gpio_set;
+		gef_gpio_chip->gc.of_gpio_n_cells = 2;
+		gef_gpio_chip->gc.ngpio = 19;
+		gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
+		gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
+		gef_gpio_chip->gc.get = gef_gpio_get;
+		gef_gpio_chip->gc.set = gef_gpio_set;
 
 		/* This function adds a memory mapped GPIO chip */
 		retval = of_mm_gpiochip_add(np, gef_gpio_chip);
@@ -146,12 +146,12 @@ static int __init gef_gpio_init(void)
 		}
 
 		/* Setup pointers to chip functions */
-		gef_gpio_chip->of_gc.gpio_cells = 2;
-		gef_gpio_chip->of_gc.gc.ngpio = 6;
-		gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in;
-		gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out;
-		gef_gpio_chip->of_gc.gc.get = gef_gpio_get;
-		gef_gpio_chip->of_gc.gc.set = gef_gpio_set;
+		gef_gpio_chip->gc.of_gpio_n_cells = 2;
+		gef_gpio_chip->gc.ngpio = 6;
+		gef_gpio_chip->gc.direction_input = gef_gpio_dir_in;
+		gef_gpio_chip->gc.direction_output = gef_gpio_dir_out;
+		gef_gpio_chip->gc.get = gef_gpio_get;
+		gef_gpio_chip->gc.set = gef_gpio_set;
 
 		/* This function adds a memory mapped GPIO chip */
 		retval = of_mm_gpiochip_add(np, gef_gpio_chip);
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 48a920a98e7..dd35ce081cf 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -55,6 +55,12 @@ config PPC_MGSUVD
 	help
 	  This enables support for the Keymile MGSUVD board.
 
+config TQM8XX
+	bool "TQM8XX"
+	select CPM1
+	help
+	  support for the mpc8xx based boards from TQM.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
index bdbfd749601..a491fe6b94f 100644
--- a/arch/powerpc/platforms/8xx/Makefile
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
 obj-$(CONFIG_PPC_ADDER875) += adder875.o
 obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
+obj-$(CONFIG_TQM8XX)      += tqm8xx_setup.o
diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
new file mode 100644
index 00000000000..b71c650fbb1
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -0,0 +1,156 @@
+/*
+ * Platform setup for the MPC8xx based boards from TQM.
+ *
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2010 DENX Software Engineering GmbH
+ *
+ * based on:
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct __initdata cpm_pin tqm8xx_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC1 */
+	{CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */
+	{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+	{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+	{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+};
+
+static struct __initdata cpm_pin tqm8xx_fec_pins[] = {
+	/* MII */
+	{CPM_PORTD, 3, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 5, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 6, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 7, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 8, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 9, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 12, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+};
+
+static void __init init_pins(int n, struct cpm_pin *pin)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+		pin++;
+	}
+}
+
+static void __init init_ioports(void)
+{
+	struct device_node *dnode;
+	struct property *prop;
+	int	len;
+
+	init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]);
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+	dnode = of_find_node_by_name(NULL, "aliases");
+	if (dnode == NULL)
+		return;
+	prop = of_find_property(dnode, "ethernet1", &len);
+	if (prop == NULL)
+		return;
+
+	/* init FEC pins */
+	init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]);
+}
+
+static void __init tqm8xx_setup_arch(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static int __init tqm8xx_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(node, "tqc,tqm8xx");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "simple-bus" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(tqm8xx, declare_of_platform_devices);
+
+define_machine(tqm8xx) {
+	.name			= "TQM8xx",
+	.probe			= tqm8xx_probe,
+	.setup_arch		= tqm8xx_setup_arch,
+	.init_IRQ		= mpc8xx_pics_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.set_rtc_time		= mpc8xx_set_rtc_time,
+	.get_rtc_time		= mpc8xx_get_rtc_time,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
index fb4eb0df054..03aabc0e16a 100644
--- a/arch/powerpc/platforms/amigaone/setup.c
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -13,12 +13,13 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/seq_file.h>
 #include <generated/utsrelease.h>
 
 #include <asm/machdep.h>
 #include <asm/cputable.h>
-#include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #include <asm/i8259.h>
 #include <asm/time.h>
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index 6257e537861..97085530aa6 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -328,7 +328,7 @@ static struct irq_host_ops msic_host_ops = {
 	.map	= msic_host_map,
 };
 
-static int axon_msi_shutdown(struct of_device *device)
+static int axon_msi_shutdown(struct platform_device *device)
 {
 	struct axon_msic *msic = dev_get_drvdata(&device->dev);
 	u32 tmp;
@@ -342,7 +342,7 @@ static int axon_msi_shutdown(struct of_device *device)
 	return 0;
 }
 
-static int axon_msi_probe(struct of_device *device,
+static int axon_msi_probe(struct platform_device *device,
 			  const struct of_device_id *device_id)
 {
 	struct device_node *dn = device->dev.of_node;
diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c
index 39d361c5c6d..beec405eb6f 100644
--- a/arch/powerpc/platforms/cell/beat_iommu.c
+++ b/arch/powerpc/platforms/cell/beat_iommu.c
@@ -108,7 +108,7 @@ static int __init celleb_init_iommu(void)
 	celleb_init_direct_mapping();
 	set_pci_dma_ops(&dma_direct_ops);
 	ppc_md.pci_dma_dev_setup = celleb_pci_dma_dev_setup;
-	bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier);
+	bus_register_notifier(&platform_bus_type, &celleb_of_bus_notifier);
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 3712900471b..58b13ce3847 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -1204,7 +1204,7 @@ static int __init cell_iommu_init(void)
 	/* Register callbacks on OF platform device addition/removal
 	 * to handle linking them to the right DMA operations
 	 */
-	bus_register_notifier(&of_platform_bus_type, &cell_of_bus_notifier);
+	bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier);
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
index c5ce02e84c8..1b574904275 100644
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ b/arch/powerpc/platforms/cell/qpace_setup.c
@@ -61,12 +61,24 @@ static void qpace_progress(char *s, unsigned short hex)
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
+static const struct of_device_id qpace_bus_ids[] __initdata = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "spider", },
+	{ .type = "axon", },
+	{ .type = "plb5", },
+	{ .type = "plb4", },
+	{ .type = "opb", },
+	{ .type = "ebc", },
+	{},
+};
+
 static int __init qpace_publish_devices(void)
 {
 	int node;
 
 	/* Publish OF platform devices for southbridge IOs */
-	of_platform_bus_probe(NULL, NULL, NULL);
+	of_platform_bus_probe(NULL, qpace_bus_ids, NULL);
 
 	/* There is no device for the MIC memory controller, thus we create
 	 * a platform device for it to attach the EDAC driver to.
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 50385db586b..691995761b3 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -141,6 +141,18 @@ static int __devinit cell_setup_phb(struct pci_controller *phb)
 	return 0;
 }
 
+static const struct of_device_id cell_bus_ids[] __initdata = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .type = "spider", },
+	{ .type = "axon", },
+	{ .type = "plb5", },
+	{ .type = "plb4", },
+	{ .type = "opb", },
+	{ .type = "ebc", },
+	{},
+};
+
 static int __init cell_publish_devices(void)
 {
 	struct device_node *root = of_find_node_by_path("/");
@@ -148,7 +160,7 @@ static int __init cell_publish_devices(void)
 	int node;
 
 	/* Publish OF platform devices for southbridge IOs */
-	of_platform_bus_probe(NULL, NULL, NULL);
+	of_platform_bus_probe(NULL, cell_bus_ids, NULL);
 
 	/* On spider based blades, we need to manually create the OF
 	 * platform devices for the PCI host bridges
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index d2c1d497846..33e5fc7334f 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -30,6 +30,7 @@
 #include <linux/init.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/proc_fs.h>
 #include <linux/dma-mapping.h>
 #include <linux/bcd.h>
 #include <linux/rtc.h>
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index 00b6730bc48..b6db7cef83b 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -87,12 +87,11 @@ static struct device_node *new_node(const char *path,
 
 	if (!np)
 		return NULL;
-	np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL);
+	np->full_name = kstrdup(path, GFP_KERNEL);
 	if (!np->full_name) {
 		kfree(np);
 		return NULL;
 	}
-	strcpy(np->full_name, path);
 	of_node_set_flag(np, OF_DYNAMIC);
 	kref_init(&np->kref);
 	np->parent = of_node_get(parent);
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index 627ee089e75..a5d907b5a4c 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -216,7 +216,7 @@ static int gpio_mdio_reset(struct mii_bus *bus)
 }
 
 
-static int __devinit gpio_mdio_probe(struct of_device *ofdev,
+static int __devinit gpio_mdio_probe(struct platform_device *ofdev,
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
@@ -275,7 +275,7 @@ out:
 }
 
 
-static int gpio_mdio_remove(struct of_device *dev)
+static int gpio_mdio_remove(struct platform_device *dev)
 {
 	struct mii_bus *bus = dev_get_drvdata(&dev->dev);
 
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 1e9eba175ff..415ca6d6b27 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -310,8 +310,12 @@ static int pmu_set_cpu_speed(int low_speed)
 	/* Restore low level PMU operations */
 	pmu_unlock();
 
-	/* Restore decrementer */
-	wakeup_decrementer();
+	/*
+	 * Restore decrementer; we'll take a decrementer interrupt
+	 * as soon as interrupts are re-enabled and the generic
+	 * clockevents code will reprogram it with the right value.
+	 */
+	set_dec(1);
 
 	/* Restore interrupts */
  	mpic_cpu_set_priority(pic_prio);
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 9e1b9fd7520..39df6ab1735 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -21,6 +21,8 @@
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/spinlock.h>
 #include <linux/adb.h>
 #include <linux/pmu.h>
@@ -2191,7 +2193,11 @@ static struct pmac_mb_def pmac_mb_defs[] = {
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP,
 	},
-	{	"iMac,1",			"iMac (first generation)",
+	{       "PowerMac10,2",                 "Mac mini (Late 2005)",
+		PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+ 	{	"iMac,1",			"iMac (first generation)",
 		PMAC_TYPE_ORIG_IMAC,		paddington_features,
 		0
 	},
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 06a137c5b8b..480567e5fa9 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -542,11 +542,12 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 	/* Make sure IRQ is disabled */
 	kw_write_reg(reg_ier, 0);
 
-	/* Request chip interrupt. We set IRQF_TIMER because we don't
+	/* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't
 	 * want that interrupt disabled between the 2 passes of driver
 	 * suspend or we'll have issues running the pfuncs
 	 */
-	if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host))
+	if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND,
+			"keywest i2c", host))
 		host->irq = NO_IRQ;
 
 	printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 630a533d0e5..890d5f72b19 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -46,6 +46,10 @@ struct pmac_irq_hw {
         unsigned int    level;
 };
 
+/* Workaround flags for 32bit powermac machines */
+unsigned int of_irq_workarounds;
+struct device_node *of_irq_dflt_pic;
+
 /* Default addresses */
 static volatile struct pmac_irq_hw __iomem *pmac_irq_hw[4];
 
@@ -428,6 +432,42 @@ static void __init pmac_pic_probe_oldstyle(void)
 	setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
 #endif
 }
+
+int of_irq_map_oldworld(struct device_node *device, int index,
+			struct of_irq *out_irq)
+{
+	const u32 *ints = NULL;
+	int intlen;
+
+	/*
+	 * Old machines just have a list of interrupt numbers
+	 * and no interrupt-controller nodes. We also have dodgy
+	 * cases where the APPL,interrupts property is completely
+	 * missing behind pci-pci bridges and we have to get it
+	 * from the parent (the bridge itself, as apple just wired
+	 * everything together on these)
+	 */
+	while (device) {
+		ints = of_get_property(device, "AAPL,interrupts", &intlen);
+		if (ints != NULL)
+			break;
+		device = device->parent;
+		if (device && strcmp(device->type, "pci") != 0)
+			break;
+	}
+	if (ints == NULL)
+		return -EINVAL;
+	intlen /= sizeof(u32);
+
+	if (index >= intlen)
+		return -EINVAL;
+
+	out_irq->controller = NULL;
+	out_irq->specifier[0] = ints[index];
+	out_irq->size = 1;
+
+	return 0;
+}
 #endif /* CONFIG_PPC32 */
 
 static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc)
@@ -559,19 +599,39 @@ static int __init pmac_pic_probe_mpic(void)
 
 void __init pmac_pic_init(void)
 {
-	unsigned int flags = 0;
-
 	/* We configure the OF parsing based on our oldworld vs. newworld
 	 * platform type and wether we were booted by BootX.
 	 */
 #ifdef CONFIG_PPC32
 	if (!pmac_newworld)
-		flags |= OF_IMAP_OLDWORLD_MAC;
+		of_irq_workarounds |= OF_IMAP_OLDWORLD_MAC;
 	if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL)
-		flags |= OF_IMAP_NO_PHANDLE;
-#endif /* CONFIG_PPC_32 */
+		of_irq_workarounds |= OF_IMAP_NO_PHANDLE;
 
-	of_irq_map_init(flags);
+	/* If we don't have phandles on a newworld, then try to locate a
+	 * default interrupt controller (happens when booting with BootX).
+	 * We do a first match here, hopefully, that only ever happens on
+	 * machines with one controller.
+	 */
+	if (pmac_newworld && (of_irq_workarounds & OF_IMAP_NO_PHANDLE)) {
+		struct device_node *np;
+
+		for_each_node_with_property(np, "interrupt-controller") {
+			/* Skip /chosen/interrupt-controller */
+			if (strcmp(np->name, "chosen") == 0)
+				continue;
+			/* It seems like at least one person wants
+			 * to use BootX on a machine with an AppleKiwi
+			 * controller which happens to pretend to be an
+			 * interrupt controller too. */
+			if (strcmp(np->name, "AppleKiwi") == 0)
+				continue;
+			/* I think we found one ! */
+			of_irq_dflt_pic = np;
+			break;
+		}
+	}
+#endif /* CONFIG_PPC32 */
 
 	/* We first try to detect Apple's new Core99 chipset, since mac-io
 	 * is quite different on those machines and contains an IBM MPIC2.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 3dbef309bc8..046ace9c438 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -26,3 +26,7 @@ obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_DTL)		+= dtl.o
+
+ifeq ($(CONFIG_PPC_PSERIES),y)
+obj-$(CONFIG_SUSPEND)		+= suspend.o
+endif
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index d71e5858408..227c1c3d585 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -463,6 +463,7 @@ static int dlpar_offline_cpu(struct device_node *dn)
 				break;
 
 			if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
+				set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
 				cpu_maps_update_done();
 				rc = cpu_down(cpu);
 				if (rc)
diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c
index 30b987b73c2..8ed0d2d0e1b 100644
--- a/arch/powerpc/platforms/pseries/eeh_cache.c
+++ b/arch/powerpc/platforms/pseries/eeh_cache.c
@@ -288,8 +288,7 @@ void __init pci_addr_cache_build(void)
 
 	spin_lock_init(&pci_io_addr_cache_root.piar_lock);
 
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-
+	for_each_pci_dev(dev) {
 		pci_addr_cache_insert_device(dev);
 
 		dn = pci_device_to_OF_node(dev);
diff --git a/arch/powerpc/platforms/pseries/event_sources.c b/arch/powerpc/platforms/pseries/event_sources.c
index e889c9d9586..2605c310166 100644
--- a/arch/powerpc/platforms/pseries/event_sources.c
+++ b/arch/powerpc/platforms/pseries/event_sources.c
@@ -41,9 +41,12 @@ void request_event_sources_irqs(struct device_node *np,
 			if (count > 15)
 				break;
 			virqs[count] = irq_create_mapping(NULL, *(opicprop++));
-			if (virqs[count] == NO_IRQ)
-				printk(KERN_ERR "Unable to allocate interrupt "
-				       "number for %s\n", np->full_name);
+			if (virqs[count] == NO_IRQ) {
+				pr_err("event-sources: Unable to allocate "
+				       "interrupt number for %s\n",
+				       np->full_name);
+				WARN_ON(1);
+			}
 			else
 				count++;
 
@@ -59,9 +62,12 @@ void request_event_sources_irqs(struct device_node *np,
 			virqs[count] = irq_create_of_mapping(oirq.controller,
 							    oirq.specifier,
 							    oirq.size);
-			if (virqs[count] == NO_IRQ)
-				printk(KERN_ERR "Unable to allocate interrupt "
-				       "number for %s\n", np->full_name);
+			if (virqs[count] == NO_IRQ) {
+				pr_err("event-sources: Unable to allocate "
+				       "interrupt number for %s\n",
+				       np->full_name);
+				WARN_ON(1);
+			}
 			else
 				count++;
 		}
@@ -70,8 +76,9 @@ void request_event_sources_irqs(struct device_node *np,
 	/* Now request them */
 	for (i = 0; i < count; i++) {
 		if (request_irq(virqs[i], handler, 0, name, NULL)) {
-			printk(KERN_ERR "Unable to request interrupt %d for "
-			       "%s\n", virqs[i], np->full_name);
+			pr_err("event-sources: Unable to request interrupt "
+			       "%d for %s\n", virqs[i], np->full_name);
+			WARN_ON(1);
 			return;
 		}
 	}
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 8f85f399ab9..fd50ccd4bac 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -116,6 +116,9 @@ static void pseries_mach_cpu_die(void)
 
 	if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
 		set_cpu_current_state(cpu, CPU_STATE_INACTIVE);
+		if (ppc_md.suspend_disable_cpu)
+			ppc_md.suspend_disable_cpu();
+
 		cede_latency_hint = 2;
 
 		get_lppaca()->idle = 1;
@@ -190,12 +193,12 @@ static void pseries_cpu_die(unsigned int cpu)
 
 	if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
 		cpu_status = 1;
-		for (tries = 0; tries < 1000; tries++) {
+		for (tries = 0; tries < 5000; tries++) {
 			if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) {
 				cpu_status = 0;
 				break;
 			}
-			cpu_relax();
+			msleep(1);
 		}
 	} else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
 
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 41a3e9a039e..a4fc6da87c2 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -61,7 +61,6 @@ static int ras_check_exception_token;
 
 #define EPOW_SENSOR_TOKEN	9
 #define EPOW_SENSOR_INDEX	0
-#define RAS_VECTOR_OFFSET	0x500
 
 static irqreturn_t ras_epow_interrupt(int irq, void *dev_id);
 static irqreturn_t ras_error_interrupt(int irq, void *dev_id);
@@ -121,7 +120,7 @@ static irqreturn_t ras_epow_interrupt(int irq, void *dev_id)
 	spin_lock(&ras_log_buf_lock);
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
-			   RAS_VECTOR_OFFSET,
+			   RTAS_VECTOR_EXTERNAL_INTERRUPT,
 			   irq_map[irq].hwirq,
 			   RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS,
 			   critical, __pa(&ras_log_buf),
@@ -156,7 +155,7 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
 	spin_lock(&ras_log_buf_lock);
 
 	status = rtas_call(ras_check_exception_token, 6, 1, NULL,
-			   RAS_VECTOR_OFFSET,
+			   RTAS_VECTOR_EXTERNAL_INTERRUPT,
 			   irq_map[irq].hwirq,
 			   RTAS_INTERNAL_ERROR, 1 /*Time Critical */,
 			   __pa(&ras_log_buf),
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 1a58637bcea..57ddbb43b33 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -118,12 +118,10 @@ static int pSeries_reconfig_add_node(const char *path, struct property *proplist
 	if (!np)
 		goto out_err;
 
-	np->full_name = kmalloc(strlen(path) + 1, GFP_KERNEL);
+	np->full_name = kstrdup(path, GFP_KERNEL);
 	if (!np->full_name)
 		goto out_err;
 
-	strcpy(np->full_name, path);
-
 	np->properties = proplist;
 	of_node_set_flag(np, OF_DYNAMIC);
 	kref_init(&np->kref);
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
new file mode 100644
index 00000000000..ed72098bb4e
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -0,0 +1,214 @@
+/*
+  * Copyright (C) 2010 Brian King IBM Corporation
+  *
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+  */
+
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/machdep.h>
+#include <asm/mmu.h>
+#include <asm/rtas.h>
+
+static u64 stream_id;
+static struct sys_device suspend_sysdev;
+static DECLARE_COMPLETION(suspend_work);
+static struct rtas_suspend_me_data suspend_data;
+static atomic_t suspending;
+
+/**
+ * pseries_suspend_begin - First phase of hibernation
+ *
+ * Check to ensure we are in a valid state to hibernate
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int pseries_suspend_begin(suspend_state_t state)
+{
+	long vasi_state, rc;
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+	/* Make sure the state is valid */
+	rc = plpar_hcall(H_VASI_STATE, retbuf, stream_id);
+
+	vasi_state = retbuf[0];
+
+	if (rc) {
+		pr_err("pseries_suspend_begin: vasi_state returned %ld\n",rc);
+		return rc;
+	} else if (vasi_state == H_VASI_ENABLED) {
+		return -EAGAIN;
+	} else if (vasi_state != H_VASI_SUSPENDING) {
+		pr_err("pseries_suspend_begin: vasi_state returned state %ld\n",
+		       vasi_state);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * pseries_suspend_cpu - Suspend a single CPU
+ *
+ * Makes the H_JOIN call to suspend the CPU
+ *
+ **/
+static int pseries_suspend_cpu(void)
+{
+	if (atomic_read(&suspending))
+		return rtas_suspend_cpu(&suspend_data);
+	return 0;
+}
+
+/**
+ * pseries_suspend_enter - Final phase of hibernation
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int pseries_suspend_enter(suspend_state_t state)
+{
+	int rc = rtas_suspend_last_cpu(&suspend_data);
+
+	atomic_set(&suspending, 0);
+	atomic_set(&suspend_data.done, 1);
+	return rc;
+}
+
+/**
+ * pseries_prepare_late - Prepare to suspend all other CPUs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int pseries_prepare_late(void)
+{
+	atomic_set(&suspending, 1);
+	atomic_set(&suspend_data.working, 0);
+	atomic_set(&suspend_data.done, 0);
+	atomic_set(&suspend_data.error, 0);
+	suspend_data.complete = &suspend_work;
+	INIT_COMPLETION(suspend_work);
+	return 0;
+}
+
+/**
+ * store_hibernate - Initiate partition hibernation
+ * @classdev:	sysdev class struct
+ * @attr:		class device attribute struct
+ * @buf:		buffer
+ * @count:		buffer size
+ *
+ * Write the stream ID received from the HMC to this file
+ * to trigger hibernating the partition
+ *
+ * Return value:
+ * 	number of bytes printed to buffer / other on failure
+ **/
+static ssize_t store_hibernate(struct sysdev_class *classdev,
+			       struct sysdev_class_attribute *attr,
+			       const char *buf, size_t count)
+{
+	int rc;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	stream_id = simple_strtoul(buf, NULL, 16);
+
+	do {
+		rc = pseries_suspend_begin(PM_SUSPEND_MEM);
+		if (rc == -EAGAIN)
+			ssleep(1);
+	} while (rc == -EAGAIN);
+
+	if (!rc)
+		rc = pm_suspend(PM_SUSPEND_MEM);
+
+	stream_id = 0;
+
+	if (!rc)
+		rc = count;
+	return rc;
+}
+
+static SYSDEV_CLASS_ATTR(hibernate, S_IWUSR, NULL, store_hibernate);
+
+static struct sysdev_class suspend_sysdev_class = {
+	.name = "power",
+};
+
+static struct platform_suspend_ops pseries_suspend_ops = {
+	.valid		= suspend_valid_only_mem,
+	.begin		= pseries_suspend_begin,
+	.prepare_late	= pseries_prepare_late,
+	.enter		= pseries_suspend_enter,
+};
+
+/**
+ * pseries_suspend_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int pseries_suspend_sysfs_register(struct sys_device *sysdev)
+{
+	int rc;
+
+	if ((rc = sysdev_class_register(&suspend_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &suspend_sysdev_class;
+
+	if ((rc = sysdev_class_create_file(&suspend_sysdev_class, &attr_hibernate)))
+		goto class_unregister;
+
+	return 0;
+
+class_unregister:
+	sysdev_class_unregister(&suspend_sysdev_class);
+	return rc;
+}
+
+/**
+ * pseries_suspend_init - initcall for pSeries suspend
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int __init pseries_suspend_init(void)
+{
+	int rc;
+
+	if (!machine_is(pseries) || !firmware_has_feature(FW_FEATURE_LPAR))
+		return 0;
+
+	suspend_data.token = rtas_token("ibm,suspend-me");
+	if (suspend_data.token == RTAS_UNKNOWN_SERVICE)
+		return 0;
+
+	if ((rc = pseries_suspend_sysfs_register(&suspend_sysdev)))
+		return rc;
+
+	ppc_md.suspend_disable_cpu = pseries_suspend_cpu;
+	suspend_set_ops(&pseries_suspend_ops);
+	return 0;
+}
+
+__initcall(pseries_suspend_init);
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index f19d1946839..5b22b07c8f6 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -549,8 +549,6 @@ static irqreturn_t xics_ipi_dispatch(int cpu)
 {
 	unsigned long *tgt = &per_cpu(xics_ipi_message, cpu);
 
-	WARN_ON(cpu_is_offline(cpu));
-
 	mb();	/* order mmio clearing qirr */
 	while (*tgt) {
 		if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) {
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 402d2212162..2659a60bd7b 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -60,7 +60,7 @@
 static int azfs_major, azfs_minor;
 
 struct axon_ram_bank {
-	struct of_device	*device;
+	struct platform_device	*device;
 	struct gendisk		*disk;
 	unsigned int		irq_id;
 	unsigned long		ph_addr;
@@ -72,7 +72,7 @@ struct axon_ram_bank {
 static ssize_t
 axon_ram_sysfs_ecc(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct of_device *device = to_of_device(dev);
+	struct platform_device *device = to_platform_device(dev);
 	struct axon_ram_bank *bank = device->dev.platform_data;
 
 	BUG_ON(!bank);
@@ -90,7 +90,7 @@ static DEVICE_ATTR(ecc, S_IRUGO, axon_ram_sysfs_ecc, NULL);
 static irqreturn_t
 axon_ram_irq_handler(int irq, void *dev)
 {
-	struct of_device *device = dev;
+	struct platform_device *device = dev;
 	struct axon_ram_bank *bank = device->dev.platform_data;
 
 	BUG_ON(!bank);
@@ -174,8 +174,8 @@ static const struct block_device_operations axon_ram_devops = {
  * axon_ram_probe - probe() method for platform driver
  * @device, @device_id: see of_platform_driver method
  */
-static int
-axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
+static int axon_ram_probe(struct platform_device *device,
+			  const struct of_device_id *device_id)
 {
 	static int axon_ram_bank_id = -1;
 	struct axon_ram_bank *bank;
@@ -304,7 +304,7 @@ failed:
  * @device: see of_platform_driver method
  */
 static int
-axon_ram_remove(struct of_device *device)
+axon_ram_remove(struct platform_device *device)
 {
 	struct axon_ram_bank *bank = device->dev.platform_data;
 
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index a7c5c470af1..65025611506 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -365,8 +365,8 @@ bcom_engine_cleanup(void)
 /* OF platform driver                                                       */
 /* ======================================================================== */
 
-static int __devinit
-mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit mpc52xx_bcom_probe(struct platform_device *op,
+					const struct of_device_id *match)
 {
 	struct device_node *ofn_sram;
 	struct resource res_bcom;
@@ -461,8 +461,7 @@ error_ofput:
 }
 
 
-static int
-mpc52xx_bcom_remove(struct of_device *op)
+static int mpc52xx_bcom_remove(struct platform_device *op)
 {
 	/* Clean up the engine */
 	bcom_engine_cleanup();
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 5d74ef7a651..1225012a681 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -11,6 +11,7 @@
  * kind, whether express or implied.
  */
 
+#include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 8d103ca6d6a..00852124ff4 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -621,7 +621,6 @@ int cpm1_gpiochip_add16(struct device_node *np)
 {
 	struct cpm1_gpio16_chip *cpm1_gc;
 	struct of_mm_gpio_chip *mm_gc;
-	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
 
 	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
@@ -631,11 +630,9 @@ int cpm1_gpiochip_add16(struct device_node *np)
 	spin_lock_init(&cpm1_gc->lock);
 
 	mm_gc = &cpm1_gc->mm_gc;
-	of_gc = &mm_gc->of_gc;
-	gc = &of_gc->gc;
+	gc = &mm_gc->gc;
 
 	mm_gc->save_regs = cpm1_gpio16_save_regs;
-	of_gc->gpio_cells = 2;
 	gc->ngpio = 16;
 	gc->direction_input = cpm1_gpio16_dir_in;
 	gc->direction_output = cpm1_gpio16_dir_out;
@@ -745,7 +742,6 @@ int cpm1_gpiochip_add32(struct device_node *np)
 {
 	struct cpm1_gpio32_chip *cpm1_gc;
 	struct of_mm_gpio_chip *mm_gc;
-	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
 
 	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
@@ -755,11 +751,9 @@ int cpm1_gpiochip_add32(struct device_node *np)
 	spin_lock_init(&cpm1_gc->lock);
 
 	mm_gc = &cpm1_gc->mm_gc;
-	of_gc = &mm_gc->of_gc;
-	gc = &of_gc->gc;
+	gc = &mm_gc->gc;
 
 	mm_gc->save_regs = cpm1_gpio32_save_regs;
-	of_gc->gpio_cells = 2;
 	gc->ngpio = 32;
 	gc->direction_input = cpm1_gpio32_dir_in;
 	gc->direction_output = cpm1_gpio32_dir_out;
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 88b9812c854..2b69aa0315b 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -325,7 +325,6 @@ int cpm2_gpiochip_add32(struct device_node *np)
 {
 	struct cpm2_gpio32_chip *cpm2_gc;
 	struct of_mm_gpio_chip *mm_gc;
-	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
 
 	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
@@ -335,11 +334,9 @@ int cpm2_gpiochip_add32(struct device_node *np)
 	spin_lock_init(&cpm2_gc->lock);
 
 	mm_gc = &cpm2_gc->mm_gc;
-	of_gc = &mm_gc->of_gc;
-	gc = &of_gc->gc;
+	gc = &mm_gc->gc;
 
 	mm_gc->save_regs = cpm2_gpio32_save_regs;
-	of_gc->gpio_cells = 2;
 	gc->ngpio = 32;
 	gc->direction_input = cpm2_gpio32_dir_in;
 	gc->direction_output = cpm2_gpio32_dir_out;
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
index eca4545dd52..7dd2885321a 100644
--- a/arch/powerpc/sysdev/fsl_gtm.c
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/io.h>
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 962c2d8dd8d..87991d3abba 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -250,7 +250,7 @@ unlock:
 	raw_spin_unlock(&desc->lock);
 }
 
-static int fsl_of_msi_remove(struct of_device *ofdev)
+static int fsl_of_msi_remove(struct platform_device *ofdev)
 {
 	struct fsl_msi *msi = ofdev->dev.platform_data;
 	int virq, i;
@@ -274,7 +274,7 @@ static int fsl_of_msi_remove(struct of_device *ofdev)
 	return 0;
 }
 
-static int __devinit fsl_of_msi_probe(struct of_device *dev,
+static int __devinit fsl_of_msi_probe(struct platform_device *dev,
 				const struct of_device_id *match)
 {
 	struct fsl_msi *msi;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 356c6a0e1b2..209384b6e03 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 9082eb921ad..44de8559c97 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -58,7 +58,8 @@ static struct platform_suspend_ops pmc_suspend_ops = {
 	.enter = pmc_suspend_enter,
 };
 
-static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+static int pmc_probe(struct platform_device *ofdev,
+		     const struct of_device_id *id)
 {
 	pmc_regs = of_iomap(ofdev->dev.of_node, 0);
 	if (!pmc_regs)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 30e1626b2e8..8bd86530ee2 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1338,7 +1338,7 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
  * master port with system-specific info, and registers the
  * master port with the RapidIO subsystem.
  */
-int fsl_rio_setup(struct of_device *dev)
+int fsl_rio_setup(struct platform_device *dev)
 {
 	struct rio_ops *ops;
 	struct rio_mport *port;
@@ -1536,7 +1536,7 @@ err_ops:
 
 /* The probe function for RapidIO peer-to-peer network.
  */
-static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
+static int __devinit fsl_of_rio_rpn_probe(struct platform_device *dev,
 				     const struct of_device_id *match)
 {
 	int rc;
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 42381bb6cd5..53609489a62 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -30,6 +30,7 @@ struct platform_diu_data_ops {
 	void (*set_pixel_clock) (unsigned int pixclock);
 	ssize_t (*show_monitor_port) (int monitor_port, char *buf);
 	int (*set_sysfs_monitor_port) (int val);
+	void (*release_bootmem) (void);
 };
 
 extern struct platform_diu_data_ops diu_ops;
diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c
index 83f519655fa..2b69084d0f0 100644
--- a/arch/powerpc/sysdev/mpc8xxx_gpio.c
+++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c
@@ -257,7 +257,6 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 {
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc;
 	struct of_mm_gpio_chip *mm_gc;
-	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
 	unsigned hwirq;
 	int ret;
@@ -271,11 +270,9 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	spin_lock_init(&mpc8xxx_gc->lock);
 
 	mm_gc = &mpc8xxx_gc->mm_gc;
-	of_gc = &mm_gc->of_gc;
-	gc = &of_gc->gc;
+	gc = &mm_gc->gc;
 
 	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
-	of_gc->gpio_cells = 2;
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
 	gc->direction_output = mpc8xxx_gpio_dir_out;
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 20b73c025a4..7c1342618a3 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1636,6 +1636,24 @@ void __devinit smp_mpic_setup_cpu(int cpu)
 {
 	mpic_setup_this_cpu();
 }
+
+void mpic_reset_core(int cpu)
+{
+	struct mpic *mpic = mpic_primary;
+	u32 pir;
+	int cpuid = get_hard_smp_processor_id(cpu);
+
+	/* Set target bit for core reset */
+	pir = mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
+	pir |= (1 << cpuid);
+	mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir);
+	mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
+
+	/* Restore target bit after reset complete */
+	pir &= ~(1 << cpuid);
+	mpic_write(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT), pir);
+	mpic_read(mpic->gregs, MPIC_INFO(GREG_PROCESSOR_INIT));
+}
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_PM
diff --git a/arch/powerpc/sysdev/mpic.h b/arch/powerpc/sysdev/mpic.h
index eff433c322a..e4a6df77b8d 100644
--- a/arch/powerpc/sysdev/mpic.h
+++ b/arch/powerpc/sysdev/mpic.h
@@ -37,5 +37,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic)
 extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
 extern void mpic_set_vector(unsigned int virq, unsigned int vector);
 extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern void mpic_reset_core(int cpu);
 
 #endif /* _POWERPC_SYSDEV_MPIC_H */
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index 31acd3b1718..1398bc45499 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -20,12 +20,7 @@
 
 #include <asm/prom.h>
 
-/*
- * These functions provide the necessary setup for the mv64x60 drivers.
- * These drivers are unusual in that they work on both the MIPS and PowerPC
- * architectures.  Because of that, the drivers do not support the normal
- * PowerPC of_platform_bus_type.  They support platform_bus_type instead.
- */
+/* These functions provide the necessary setup for the mv64x60 drivers. */
 
 static struct of_device_id __initdata of_mv64x60_devices[] = {
 	{ .compatible = "marvell,mv64306-devctrl", },
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 198f288570c..77bb3f4d530 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -73,7 +73,6 @@ static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
 	.attr = {
 		.name = "hs_reg",
 		.mode = S_IRUGO | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size  = MV64X60_VAL_LEN_MAX,
 	.read  = mv64x60_hs_reg_read,
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
index d07137a07d7..24a0bb955b1 100644
--- a/arch/powerpc/sysdev/pmi.c
+++ b/arch/powerpc/sysdev/pmi.c
@@ -43,7 +43,7 @@ struct pmi_data {
 	struct mutex		msg_mutex;
 	pmi_message_t		msg;
 	struct completion	*completion;
-	struct of_device	*dev;
+	struct platform_device	*dev;
 	int			irq;
 	u8 __iomem		*pmi_reg;
 	struct work_struct	work;
@@ -121,7 +121,7 @@ static void pmi_notify_handlers(struct work_struct *work)
 	spin_unlock(&data->handler_spinlock);
 }
 
-static int pmi_of_probe(struct of_device *dev,
+static int pmi_of_probe(struct platform_device *dev,
 			const struct of_device_id *match)
 {
 	struct device_node *np = dev->dev.of_node;
@@ -185,7 +185,7 @@ out:
 	return rc;
 }
 
-static int pmi_of_remove(struct of_device *dev)
+static int pmi_of_remove(struct platform_device *dev)
 {
 	struct pmi_handler *handler, *tmp;
 
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
index 3812fc366be..fc65ad1b329 100644
--- a/arch/powerpc/sysdev/ppc4xx_gpio.c
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -181,7 +181,6 @@ static int __init ppc4xx_add_gpiochips(void)
 		int ret;
 		struct ppc4xx_gpio_chip *ppc4xx_gc;
 		struct of_mm_gpio_chip *mm_gc;
-		struct of_gpio_chip *of_gc;
 		struct gpio_chip *gc;
 
 		ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
@@ -193,10 +192,8 @@ static int __init ppc4xx_add_gpiochips(void)
 		spin_lock_init(&ppc4xx_gc->lock);
 
 		mm_gc = &ppc4xx_gc->mm_gc;
-		of_gc = &mm_gc->of_gc;
-		gc = &of_gc->gc;
+		gc = &mm_gc->gc;
 
-		of_gc->gpio_cells = 2;
 		gc->ngpio = 32;
 		gc->direction_input = ppc4xx_gpio_dir_in;
 		gc->direction_output = ppc4xx_gpio_dir_out;
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index dc8f8d61807..36bf845df12 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -138,8 +138,8 @@ struct qe_pin {
 struct qe_pin *qe_pin_request(struct device_node *np, int index)
 {
 	struct qe_pin *qe_pin;
-	struct device_node *gc;
-	struct of_gpio_chip *of_gc = NULL;
+	struct device_node *gpio_np;
+	struct gpio_chip *gc;
 	struct of_mm_gpio_chip *mm_gc;
 	struct qe_gpio_chip *qe_gc;
 	int err;
@@ -155,40 +155,40 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	}
 
 	err = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
-					  &gc, &gpio_spec);
+					  &gpio_np, &gpio_spec);
 	if (err) {
 		pr_debug("%s: can't parse gpios property\n", __func__);
 		goto err0;
 	}
 
-	if (!of_device_is_compatible(gc, "fsl,mpc8323-qe-pario-bank")) {
+	if (!of_device_is_compatible(gpio_np, "fsl,mpc8323-qe-pario-bank")) {
 		pr_debug("%s: tried to get a non-qe pin\n", __func__);
 		err = -EINVAL;
 		goto err1;
 	}
 
-	of_gc = gc->data;
-	if (!of_gc) {
+	gc = of_node_to_gpiochip(gpio_np);
+	if (!gc) {
 		pr_debug("%s: gpio controller %s isn't registered\n",
-			 np->full_name, gc->full_name);
+			 np->full_name, gpio_np->full_name);
 		err = -ENODEV;
 		goto err1;
 	}
 
-	gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+	gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size);
 	if (!gpio_cells || size != sizeof(*gpio_cells) ||
-			*gpio_cells != of_gc->gpio_cells) {
+			*gpio_cells != gc->of_gpio_n_cells) {
 		pr_debug("%s: wrong #gpio-cells for %s\n",
-			 np->full_name, gc->full_name);
+			 np->full_name, gpio_np->full_name);
 		err = -EINVAL;
 		goto err1;
 	}
 
-	err = of_gc->xlate(of_gc, np, gpio_spec, NULL);
+	err = gc->of_xlate(gc, np, gpio_spec, NULL);
 	if (err < 0)
 		goto err1;
 
-	mm_gc = to_of_mm_gpio_chip(&of_gc->gc);
+	mm_gc = to_of_mm_gpio_chip(gc);
 	qe_gc = to_qe_gpio_chip(mm_gc);
 
 	spin_lock_irqsave(&qe_gc->lock, flags);
@@ -206,7 +206,7 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
 	if (!err)
 		return qe_pin;
 err1:
-	of_node_put(gc);
+	of_node_put(gpio_np);
 err0:
 	kfree(qe_pin);
 	pr_debug("%s failed with status %d\n", __func__, err);
@@ -307,7 +307,6 @@ static int __init qe_add_gpiochips(void)
 		int ret;
 		struct qe_gpio_chip *qe_gc;
 		struct of_mm_gpio_chip *mm_gc;
-		struct of_gpio_chip *of_gc;
 		struct gpio_chip *gc;
 
 		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
@@ -319,11 +318,9 @@ static int __init qe_add_gpiochips(void)
 		spin_lock_init(&qe_gc->lock);
 
 		mm_gc = &qe_gc->mm_gc;
-		of_gc = &mm_gc->of_gc;
-		gc = &of_gc->gc;
+		gc = &mm_gc->gc;
 
 		mm_gc->save_regs = qe_gpio_save_regs;
-		of_gc->gpio_cells = 2;
 		gc->ngpio = QE_PIO_PINS;
 		gc->direction_input = qe_gpio_dir_in;
 		gc->direction_output = qe_gpio_dir_out;
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 093e0ae1a94..3da8014931c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -651,14 +651,15 @@ unsigned int qe_get_num_of_snums(void)
 EXPORT_SYMBOL(qe_get_num_of_snums);
 
 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
-static int qe_resume(struct of_device *ofdev)
+static int qe_resume(struct platform_device *ofdev)
 {
 	if (!qe_alive_during_sleep())
 		qe_reset();
 	return 0;
 }
 
-static int qe_probe(struct of_device *ofdev, const struct of_device_id *id)
+static int qe_probe(struct platform_device *ofdev,
+		    const struct of_device_id *id)
 {
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
index d5fb173e588..b6defda5ccc 100644
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -91,7 +91,6 @@ static int __init u8_simple_gpiochip_add(struct device_node *np)
 	int ret;
 	struct u8_gpio_chip *u8_gc;
 	struct of_mm_gpio_chip *mm_gc;
-	struct of_gpio_chip *of_gc;
 	struct gpio_chip *gc;
 
 	u8_gc = kzalloc(sizeof(*u8_gc), GFP_KERNEL);
@@ -101,11 +100,9 @@ static int __init u8_simple_gpiochip_add(struct device_node *np)
 	spin_lock_init(&u8_gc->lock);
 
 	mm_gc = &u8_gc->mm_gc;
-	of_gc = &mm_gc->of_gc;
-	gc = &of_gc->gc;
+	gc = &mm_gc->gc;
 
 	mm_gc->save_regs = u8_gpio_save_regs;
-	of_gc->gpio_cells = 2;
 	gc->ngpio = 8;
 	gc->direction_input = u8_gpio_dir_in;
 	gc->direction_output = u8_gpio_dir_out;
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 8bad7d5f32a..0554445200b 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -155,6 +155,9 @@ static int do_spu_cmd(void);
 #ifdef CONFIG_44x
 static void dump_tlb_44x(void);
 #endif
+#ifdef CONFIG_PPC_BOOK3E
+static void dump_tlb_book3e(void);
+#endif
 
 static int xmon_no_auto_backtrace;
 
@@ -888,6 +891,11 @@ cmds(struct pt_regs *excp)
 			dump_tlb_44x();
 			break;
 #endif
+#ifdef CONFIG_PPC_BOOK3E
+		case 'u':
+			dump_tlb_book3e();
+			break;
+#endif
 		default:
 			printf("Unrecognized command: ");
 		        do {
@@ -2701,6 +2709,150 @@ static void dump_tlb_44x(void)
 }
 #endif /* CONFIG_44x */
 
+#ifdef CONFIG_PPC_BOOK3E
+static void dump_tlb_book3e(void)
+{
+	u32 mmucfg, pidmask, lpidmask;
+	u64 ramask;
+	int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0;
+	int mmu_version;
+	static const char *pgsz_names[] = {
+		"  1K",
+		"  2K",
+		"  4K",
+		"  8K",
+		" 16K",
+		" 32K",
+		" 64K",
+		"128K",
+		"256K",
+		"512K",
+		"  1M",
+		"  2M",
+		"  4M",
+		"  8M",
+		" 16M",
+		" 32M",
+		" 64M",
+		"128M",
+		"256M",
+		"512M",
+		"  1G",
+		"  2G",
+		"  4G",
+		"  8G",
+		" 16G",
+		" 32G",
+		" 64G",
+		"128G",
+		"256G",
+		"512G",
+		"  1T",
+		"  2T",
+	};
+
+	/* Gather some infos about the MMU */
+	mmucfg = mfspr(SPRN_MMUCFG);
+	mmu_version = (mmucfg & 3) + 1;
+	ntlbs = ((mmucfg >> 2) & 3) + 1;
+	pidsz = ((mmucfg >> 6) & 0x1f) + 1;
+	lpidsz = (mmucfg >> 24) & 0xf;
+	rasz = (mmucfg >> 16) & 0x7f;
+	if ((mmu_version > 1) && (mmucfg & 0x10000))
+		lrat = 1;
+	printf("Book3E MMU MAV=%d.0,%d TLBs,%d-bit PID,%d-bit LPID,%d-bit RA\n",
+	       mmu_version, ntlbs, pidsz, lpidsz, rasz);
+	pidmask = (1ul << pidsz) - 1;
+	lpidmask = (1ul << lpidsz) - 1;
+	ramask = (1ull << rasz) - 1;
+
+	for (tlb = 0; tlb < ntlbs; tlb++) {
+		u32 tlbcfg;
+		int nent, assoc, new_cc = 1;
+		printf("TLB %d:\n------\n", tlb);
+		switch(tlb) {
+		case 0:
+			tlbcfg = mfspr(SPRN_TLB0CFG);
+			break;
+		case 1:
+			tlbcfg = mfspr(SPRN_TLB1CFG);
+			break;
+		case 2:
+			tlbcfg = mfspr(SPRN_TLB2CFG);
+			break;
+		case 3:
+			tlbcfg = mfspr(SPRN_TLB3CFG);
+			break;
+		default:
+			printf("Unsupported TLB number !\n");
+			continue;
+		}
+		nent = tlbcfg & 0xfff;
+		assoc = (tlbcfg >> 24) & 0xff;
+		for (i = 0; i < nent; i++) {
+			u32 mas0 = MAS0_TLBSEL(tlb);
+			u32 mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K);
+			u64 mas2 = 0;
+			u64 mas7_mas3;
+			int esel = i, cc = i;
+
+			if (assoc != 0) {
+				cc = i / assoc;
+				esel = i % assoc;
+				mas2 = cc * 0x1000;
+			}
+
+			mas0 |= MAS0_ESEL(esel);
+			mtspr(SPRN_MAS0, mas0);
+			mtspr(SPRN_MAS1, mas1);
+			mtspr(SPRN_MAS2, mas2);
+			asm volatile("tlbre  0,0,0" : : : "memory");
+			mas1 = mfspr(SPRN_MAS1);
+			mas2 = mfspr(SPRN_MAS2);
+			mas7_mas3 = mfspr(SPRN_MAS7_MAS3);
+			if (assoc && (i % assoc) == 0)
+				new_cc = 1;
+			if (!(mas1 & MAS1_VALID))
+				continue;
+			if (assoc == 0)
+				printf("%04x- ", i);
+			else if (new_cc)
+				printf("%04x-%c", cc, 'A' + esel);
+			else
+				printf("    |%c", 'A' + esel);
+			new_cc = 0;
+			printf(" %016llx %04x %s %c%c AS%c",
+			       mas2 & ~0x3ffull,
+			       (mas1 >> 16) & 0x3fff,
+			       pgsz_names[(mas1 >> 7) & 0x1f],
+			       mas1 & MAS1_IND ? 'I' : ' ',
+			       mas1 & MAS1_IPROT ? 'P' : ' ',
+			       mas1 & MAS1_TS ? '1' : '0');
+			printf(" %c%c%c%c%c%c%c",
+			       mas2 & MAS2_X0 ? 'a' : ' ',
+			       mas2 & MAS2_X1 ? 'v' : ' ',
+			       mas2 & MAS2_W  ? 'w' : ' ',
+			       mas2 & MAS2_I  ? 'i' : ' ',
+			       mas2 & MAS2_M  ? 'm' : ' ',
+			       mas2 & MAS2_G  ? 'g' : ' ',
+			       mas2 & MAS2_E  ? 'e' : ' ');
+			printf(" %016llx", mas7_mas3 & ramask & ~0x7ffull);
+			if (mas1 & MAS1_IND)
+				printf(" %s\n",
+				       pgsz_names[(mas7_mas3 >> 1) & 0x1f]);
+			else
+				printf(" U%c%c%c S%c%c%c\n",
+				       mas7_mas3 & MAS3_UX ? 'x' : ' ',
+				       mas7_mas3 & MAS3_UW ? 'w' : ' ',
+				       mas7_mas3 & MAS3_UR ? 'r' : ' ',
+				       mas7_mas3 & MAS3_SX ? 'x' : ' ',
+				       mas7_mas3 & MAS3_SW ? 'w' : ' ',
+				       mas7_mas3 & MAS3_SR ? 'r' : ' ');
+		}
+	}
+}
+#endif /* CONFIG_PPC_BOOK3E */
+
 static void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index bee1c0f794c..f0777a47e3a 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -40,9 +40,6 @@ config ARCH_HAS_ILOG2_U64
 config GENERIC_HWEIGHT
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_TIME_VSYSCALL
 	def_bool y
 
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 30c5f01f93b..0c9e6c6d2a6 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -24,7 +24,8 @@ CHECKFLAGS	+= -D__s390__ -msize-long
 else
 LD_BFD		:= elf64-s390
 LDFLAGS		:= -m elf64_s390
-MODFLAGS	+= -fpic -D__PIC__
+KBUILD_AFLAGS_MODULE += -fpic -D__PIC__
+KBUILD_CFLAGS_MODULE += -fpic -D__PIC__
 KBUILD_CFLAGS	+= -m64
 KBUILD_AFLAGS	+= -m64
 UTS_MACHINE	:= s390x
diff --git a/arch/s390/include/asm/local64.h b/arch/s390/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/s390/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 03be99919d6..99e3409102b 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -13,4 +13,9 @@ typedef struct {
 	int alloc_pgste; /* cloned contexts will have extended page tables */
 } mm_context_t;
 
+#define INIT_MM_CONTEXT(name)						      \
+	.context.list_lock    = __SPIN_LOCK_UNLOCKED(name.context.list_lock), \
+	.context.crst_list    = LIST_HEAD_INIT(name.context.crst_list),	      \
+	.context.pgtable_list = LIST_HEAD_INIT(name.context.pgtable_list),
+
 #endif
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 15a7536452d..2896cac9c14 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -207,8 +207,8 @@ struct clocksource * __init clocksource_default_clock(void)
 	return &clocksource_tod;
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
-		     u32 mult)
+void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
+			struct clocksource *clock, u32 mult)
 {
 	if (clock != &clocksource_tod)
 		return;
@@ -219,8 +219,8 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	vdso_data->xtime_tod_stamp = clock->cycle_last;
 	vdso_data->xtime_clock_sec = wall_time->tv_sec;
 	vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
-	vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
-	vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+	vdso_data->wtom_clock_sec = wtm->tv_sec;
+	vdso_data->wtom_clock_nsec = wtm->tv_nsec;
 	vdso_data->ntp_mult = mult;
 	smp_wmb();
 	++vdso_data->tb_update_count;
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 90165e7ca04..34c43f23b28 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -332,10 +332,6 @@ void __init vmem_map_init(void)
 	unsigned long start, end;
 	int i;
 
-	spin_lock_init(&init_mm.context.list_lock);
-	INIT_LIST_HEAD(&init_mm.context.crst_list);
-	INIT_LIST_HEAD(&init_mm.context.pgtable_list);
-	init_mm.context.noexec = 0;
 	ro_start = ((unsigned long)&_stext) & PAGE_MASK;
 	ro_end = PFN_ALIGN((unsigned long)&_eshared);
 	for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 55d413e6dcf..be4a1558475 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -55,9 +55,6 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
-config GENERIC_TIME
-	def_bool y
-
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 
diff --git a/arch/score/Makefile b/arch/score/Makefile
index 68e0cd06d5c..d77dc639d8e 100644
--- a/arch/score/Makefile
+++ b/arch/score/Makefile
@@ -20,7 +20,8 @@ cflags-y += -G0 -pipe -mel -mnhwloop -D__SCOREEL__ \
 #
 KBUILD_AFLAGS += $(cflags-y)
 KBUILD_CFLAGS += $(cflags-y)
-MODFLAGS += -mlong-calls
+KBUILD_AFLAGS_MODULE += -mlong-calls
+KBUILD_CFLAGS_MODULE += -mlong-calls
 LDFLAGS += --oformat elf32-littlescore
 LDFLAGS_vmlinux	+= -G0 -static -nostdlib
 
diff --git a/arch/score/include/asm/local64.h b/arch/score/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/score/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 82868fee21f..33990fa95af 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -98,9 +98,6 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_IOMAP
 	bool
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/sh/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 81b6de41ae5..7a3dc356725 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -185,10 +185,10 @@ static void sh_perf_event_update(struct perf_event *event,
 	 * this is the simplest approach for maintaining consistency.
 	 */
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	new_raw_count = sh_pmu->read(idx);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
@@ -203,7 +203,7 @@ again:
 	delta = (new_raw_count << shift) - (prev_raw_count << shift);
 	delta >>= shift;
 
-	atomic64_add(delta, &event->count);
+	local64_add(delta, &event->count);
 }
 
 static void sh_pmu_disable(struct perf_event *event)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index c0015db247b..491e9d6de19 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -18,6 +18,7 @@ config 64BIT
 config SPARC
 	bool
 	default y
+	select OF
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP || SPARC64
@@ -66,9 +67,6 @@ config BITS
 	default 32 if SPARC32
 	default 64 if SPARC64
 
-config GENERIC_TIME
-	def_bool y
-
 config ARCH_USES_GETTIMEOFFSET
 	bool
 	default y if SPARC32
@@ -148,9 +146,6 @@ config GENERIC_GPIO
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config OF
-	def_bool y
-
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y if SPARC64
 
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 1b4a831565f..d9a795efbc0 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -30,18 +30,4 @@ config FRAME_POINTER
 	depends on MCOUNT
 	default y
 
-config DEBUG_STRICT_USER_COPY_CHECKS
-	bool "Strict copy size checks"
-	depends on DEBUG_KERNEL && !TRACE_BRANCH_PROFILING
-	---help---
-	  Enabling this option turns a certain set of sanity checks for user
-	  copy operations into compile time failures.
-
-	  The copy_from_user() etc checks are there to help test if there
-	  are sufficient security checks on the length argument of
-	  the copy operation, by having gcc prove that the argument is
-	  within bounds.
-
-	  If unsure, or if you run an older (pre 4.4) gcc, say N.
-
 endmenu
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 1dc07a0014c..8a3b33a2063 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34
-# Wed May 26 21:14:01 2010
+# Linux kernel version: 2.6.35
+# Mon Aug  9 02:31:36 2010
 #
 CONFIG_64BIT=y
 CONFIG_SPARC=y
@@ -9,7 +9,6 @@ CONFIG_SPARC=y
 CONFIG_SPARC64=y
 CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
 CONFIG_BITS=64
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_IOMMU_HELPER=y
@@ -24,8 +23,8 @@ CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_MMU=y
 CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_OF=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -36,6 +35,7 @@ CONFIG_CONSTRUCTORS=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
@@ -51,8 +51,6 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 # RCU Subsystem
 #
 CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=64
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -110,7 +108,6 @@ CONFIG_PCI_QUIRKS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=m
@@ -129,7 +126,6 @@ CONFIG_HAVE_DMA_API_DEBUG=y
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -227,8 +223,6 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_NEED_MULTIPLE_NODES=y
@@ -236,6 +230,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_HAVE_MEMBLOCK=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_COMPACTION is not set
@@ -345,6 +340,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
@@ -368,6 +364,7 @@ CONFIG_VLAN_8021Q=m
 # CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
+# CONFIG_DNS_RESOLVER is not set
 CONFIG_RPS=y
 
 #
@@ -416,6 +413,11 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
+CONFIG_OF=y
+
+#
+# Flattened Device Tree and Open Firmware support
+#
 CONFIG_OF_DEVICE=y
 CONFIG_OF_MDIO=m
 # CONFIG_PARPORT is not set
@@ -638,6 +640,7 @@ CONFIG_DM_ZERO=m
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
+# CONFIG_FIREWIRE_NOSY is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
@@ -708,7 +711,6 @@ CONFIG_NET_PCI=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
@@ -744,6 +746,8 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 CONFIG_CHELSIO_T4_DEPENDS=y
 # CONFIG_CHELSIO_T4 is not set
+CONFIG_CHELSIO_T4VF_DEPENDS=y
+# CONFIG_CHELSIO_T4VF is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGBEVF is not set
@@ -778,6 +782,10 @@ CONFIG_NIU=m
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_IPHETH is not set
 # CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -824,10 +832,11 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
 CONFIG_KEYBOARD_LKKBD=m
 # CONFIG_KEYBOARD_TCA6416 is not set
 # CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
@@ -861,6 +870,7 @@ CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_CM109 is not set
 # CONFIG_INPUT_UINPUT is not set
 # CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_ADXL34X is not set
 
 #
 # Hardware I/O ports
@@ -921,6 +931,7 @@ CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_COMPAT=y
@@ -954,6 +965,7 @@ CONFIG_I2C_ALGOBIT=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_XILINX is not set
 
@@ -967,7 +979,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Other I2C/SMBus bus drivers
 #
-# CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1034,12 +1045,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
@@ -1063,15 +1076,14 @@ CONFIG_SSB_POSSIBLE=y
 # Sonics Silicon Backplane
 #
 # CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS6507X is not set
 # CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TC35892 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
@@ -1081,8 +1093,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_ABX500_CORE is not set
 # CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1320,6 +1334,7 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_HID_3M_PCT is not set
 CONFIG_HID_A4TECH=y
+# CONFIG_HID_ACRUX_FF is not set
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 # CONFIG_HID_CANDO is not set
@@ -1349,6 +1364,7 @@ CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 # CONFIG_HID_PICOLCD is not set
 # CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
 # CONFIG_HID_ROCCAT_KONE is not set
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
@@ -1713,7 +1729,8 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
@@ -1753,6 +1770,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
+# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -1777,13 +1795,10 @@ CONFIG_FTRACE=y
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_FTRACE_SYSCALLS is not set
-# CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_RING_BUFFER_BENCHMARK is not set
@@ -1795,7 +1810,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_DCFLUSH is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
 
 #
 # Security options
@@ -1804,9 +1818,6 @@ CONFIG_KEYS=y
 # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
 CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_DEFAULT_SECURITY=""
 CONFIG_XOR_BLOCKS=m
@@ -1829,9 +1840,10 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_PCOMP2=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_MANAGER_TESTS=y
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_PCRYPT is not set
@@ -1941,5 +1953,4 @@ CONFIG_DECOMPRESS_LZO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
index d4c45214741..daa6a8a5e9c 100644
--- a/arch/sparc/include/asm/device.h
+++ b/arch/sparc/include/asm/device.h
@@ -6,18 +6,25 @@
 #ifndef _ASM_SPARC_DEVICE_H
 #define _ASM_SPARC_DEVICE_H
 
+#include <asm/openprom.h>
+
 struct device_node;
-struct of_device;
+struct platform_device;
 
 struct dev_archdata {
 	void			*iommu;
 	void			*stc;
 	void			*host_controller;
-	struct of_device	*op;
+	struct platform_device	*op;
 	int			numa_node;
 };
 
+extern void of_propagate_archdata(struct platform_device *bus);
+
 struct pdev_archdata {
+	struct resource		resource[PROMREG_MAX];
+	unsigned int		irqs[PROMINTR_MAX];
+	int			num_irqs;
 };
 
 #endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index 8fac3ab22f3..6597ce874d7 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -43,7 +43,7 @@ struct sun_flpy_controller {
 /* You'll only ever find one controller on an Ultra anyways. */
 static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
 unsigned long fdc_status;
-static struct of_device *floppy_op = NULL;
+static struct platform_device *floppy_op = NULL;
 
 struct sun_floppy_ops {
 	unsigned char	(*fd_inb) (unsigned long port);
@@ -548,7 +548,7 @@ static unsigned long __init sun_floppy_init(void)
 {
 	static int initialized = 0;
 	struct device_node *dp;
-	struct of_device *op;
+	struct platform_device *op;
 	const char *prop;
 	char state[128];
 
@@ -567,7 +567,7 @@ static unsigned long __init sun_floppy_init(void)
 	}
 	if (op) {
 		floppy_op = op;
-		FLOPPY_IRQ = op->irqs[0];
+		FLOPPY_IRQ = op->archdata.irqs[0];
 	} else {
 		struct device_node *ebus_dp;
 		void __iomem *auxio_reg;
@@ -593,7 +593,7 @@ static unsigned long __init sun_floppy_init(void)
 		if (state_prop && !strncmp(state_prop, "disabled", 8))
 			return 0;
 
-		FLOPPY_IRQ = op->irqs[0];
+		FLOPPY_IRQ = op->archdata.irqs[0];
 
 		/* Make sure the high density bit is set, some systems
 		 * (most notably Ultra5/Ultra10) come up with it clear.
@@ -661,7 +661,7 @@ static unsigned long __init sun_floppy_init(void)
 		config = 0;
 		for (dp = ebus_dp->child; dp; dp = dp->sibling) {
 			if (!strcmp(dp->name, "ecpp")) {
-				struct of_device *ecpp_op;
+				struct platform_device *ecpp_op;
 
 				ecpp_op = of_find_device_by_node(dp);
 				if (ecpp_op)
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
index 3de42e77627..ec23b0a87b9 100644
--- a/arch/sparc/include/asm/highmem.h
+++ b/arch/sparc/include/asm/highmem.h
@@ -71,7 +71,7 @@ static inline void kunmap(struct page *page)
 }
 
 extern void *kmap_atomic(struct page *page, enum km_type type);
-extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
 extern struct page *kmap_atomic_to_page(void *vaddr);
 
 #define flush_cache_kmaps()	flush_cache_all()
diff --git a/arch/sparc/include/asm/local64.h b/arch/sparc/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/sparc/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
deleted file mode 100644
index f320246a058..00000000000
--- a/arch/sparc/include/asm/of_device.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ASM_SPARC_OF_DEVICE_H
-#define _ASM_SPARC_OF_DEVICE_H
-#ifdef __KERNEL__
-
-#include <linux/device.h>
-#include <linux/of.h>
-#include <linux/mod_devicetable.h>
-#include <asm/openprom.h>
-
-/*
- * The of_device is a kind of "base class" that is a superset of
- * struct device for use by devices attached to an OF node and
- * probed using OF properties.
- */
-struct of_device
-{
-	struct device			dev;
-	struct resource			resource[PROMREG_MAX];
-	unsigned int			irqs[PROMINTR_MAX];
-	int				num_irqs;
-
-	void				*sysdata;
-
-	int				slot;
-	int				portid;
-	int				clock_freq;
-};
-
-extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
-extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
-
-extern void of_propagate_archdata(struct of_device *bus);
-
-/* This is just here during the transition */
-#include <linux/of_platform.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
deleted file mode 100644
index 90da99059f8..00000000000
--- a/arch/sparc/include/asm/of_platform.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef ___ASM_SPARC_OF_PLATFORM_H
-#define ___ASM_SPARC_OF_PLATFORM_H
-/*
- *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
- *			 <benh@kernel.crashing.org>
- *    Modified for Sparc by merging parts of asm/of_device.h
- *		by Stephen Rothwell
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#define of_bus_type	of_platform_bus_type	/* for compatibility */
-
-#endif
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index c333b8d0949..aa4c82648d8 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -103,7 +103,7 @@ static inline unsigned int get_dma_residue(unsigned int dmanr)
 	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
 }
 
-static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit ecpp_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	unsigned long base = op->resource[0].start;
 	unsigned long config = op->resource[1].start;
@@ -116,7 +116,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id
 	parent = op->dev.of_node->parent;
 	if (!strcmp(parent->name, "dma")) {
 		p = parport_pc_probe_port(base, base + 0x400,
-					  op->irqs[0], PARPORT_DMA_NOFIFO,
+					  op->archdata.irqs[0], PARPORT_DMA_NOFIFO,
 					  op->dev.parent->parent, 0);
 		if (!p)
 			return -ENOMEM;
@@ -166,7 +166,7 @@ static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id
 		       0, PTR_LPT_REG_DIR);
 
 	p = parport_pc_probe_port(base, base + 0x400,
-				  op->irqs[0],
+				  op->archdata.irqs[0],
 				  slot,
 				  op->dev.parent,
 				  0);
@@ -192,7 +192,7 @@ out_err:
 	return err;
 }
 
-static int __devexit ecpp_remove(struct of_device *op)
+static int __devexit ecpp_remove(struct platform_device *op)
 {
 	struct parport *p = dev_get_drvdata(&op->dev);
 	int slot = p->dma;
@@ -228,6 +228,10 @@ static const struct of_device_id ecpp_match[] = {
 		.name = "parallel",
 		.compatible = "ns87317-ecpp",
 	},
+	{
+		.name = "parallel",
+		.compatible = "pnpALI,1533,3",
+	},
 	{},
 };
 
@@ -243,9 +247,7 @@ static struct of_platform_driver ecpp_driver = {
 
 static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
 {
-	of_register_driver(&ecpp_driver, &of_bus_type);
-
-	return 0;
+	return of_register_platform_driver(&ecpp_driver);
 }
 
 #endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/arch/sparc/include/asm/perf_event.h b/arch/sparc/include/asm/perf_event.h
index 7e2669894ce..727af70646c 100644
--- a/arch/sparc/include/asm/perf_event.h
+++ b/arch/sparc/include/asm/perf_event.h
@@ -6,7 +6,30 @@ extern void set_perf_event_pending(void);
 #define	PERF_EVENT_INDEX_OFFSET	0
 
 #ifdef CONFIG_PERF_EVENTS
+#include <asm/ptrace.h>
+
 extern void init_hw_perf_events(void);
+
+#define perf_arch_fetch_caller_regs(regs, ip)		\
+do {							\
+	unsigned long _pstate, _asi, _pil, _i7, _fp;	\
+	__asm__ __volatile__("rdpr %%pstate, %0\n\t"	\
+			     "rd %%asi, %1\n\t"		\
+			     "rdpr %%pil, %2\n\t"	\
+			     "mov %%i7, %3\n\t"		\
+			     "mov %%i6, %4\n\t"		\
+			     : "=r" (_pstate),		\
+			       "=r" (_asi),		\
+			       "=r" (_pil),		\
+			       "=r" (_i7),		\
+			       "=r" (_fp));		\
+	(regs)->tstate = (_pstate << 8) |		\
+		(_asi << 24) | (_pil << 20);		\
+	(regs)->tpc = (ip);				\
+	(regs)->tnpc = (regs)->tpc + 4;			\
+	(regs)->u_regs[UREG_I6] = _fp;			\
+	(regs)->u_regs[UREG_I7] = _i7;			\
+} while (0)
 #else
 static inline void init_hw_perf_events(void)	{ }
 #endif
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index f845828ca4c..291f12575ed 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -43,20 +43,22 @@ extern int of_getintprop_default(struct device_node *np,
 extern int of_find_in_proplist(const char *list, const char *match, int len);
 #ifdef CONFIG_NUMA
 extern int of_node_to_nid(struct device_node *dp);
-#else
-#define of_node_to_nid(dp)	(-1)
+#define of_node_to_nid of_node_to_nid
 #endif
 
 extern void prom_build_devicetree(void);
 extern void of_populate_present_mask(void);
 extern void of_fill_in_cpu_data(void);
 
+struct resource;
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
 /* These routines are here to provide compatibility with how powerpc
  * handles IRQ mapping for OF device nodes.  We precompute and permanently
- * register them in the of_device objects, whereas powerpc computes them
+ * register them in the platform_device objects, whereas powerpc computes them
  * on request.
  */
-extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
 static inline void irq_dispose_mapping(unsigned int virq)
 {
 }
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 25f1d10155e..8303ac48103 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -260,23 +260,8 @@ static inline unsigned long __copy_to_user(void __user *to, const void *from, un
 	return __copy_user(to, (__force void __user *) from, n);
 }
 
-extern void copy_from_user_overflow(void)
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-	__compiletime_error("copy_from_user() buffer size is not provably correct")
-#else
-	__compiletime_warning("copy_from_user() buffer size is not provably correct")
-#endif
-;
-
 static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	int sz = __compiletime_object_size(to);
-
-	if (unlikely(sz != -1 && sz < n)) {
-		copy_from_user_overflow();
-		return n;
-	}
-
 	if (n && __access_ok((unsigned long) from, n))
 		return __copy_user((__force void __user *) to, from, n);
 	else
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 2406788bfe5..3e1449f0779 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -205,14 +205,6 @@ __asm__ __volatile__(							\
 
 extern int __get_user_bad(void);
 
-extern void copy_from_user_overflow(void)
-#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
-	__compiletime_error("copy_from_user() buffer size is not provably correct")
-#else
-	__compiletime_warning("copy_from_user() buffer size is not provably correct")
-#endif
-;
-
 extern unsigned long __must_check ___copy_from_user(void *to,
 						    const void __user *from,
 						    unsigned long size);
@@ -221,16 +213,11 @@ extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long size)
 {
-	int sz = __compiletime_object_size(to);
-	unsigned long ret = size;
-
-	if (likely(sz == -1 || sz >= size)) {
-		ret = ___copy_from_user(to, from, size);
-		if (unlikely(ret))
-			ret = copy_from_user_fixup(to, from, size);
-	} else {
-		copy_from_user_overflow();
-	}
+	unsigned long ret = ___copy_from_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_from_user_fixup(to, from, size);
+
 	return ret;
 }
 #define __copy_from_user copy_from_user
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index b27476caa13..2c0046ecc71 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -68,7 +68,7 @@ static void apc_swift_idle(void)
 #endif
 } 
 
-static inline void apc_free(struct of_device *op)
+static inline void apc_free(struct platform_device *op)
 {
 	of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0]));
 }
@@ -136,7 +136,7 @@ static const struct file_operations apc_fops = {
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
 
-static int __devinit apc_probe(struct of_device *op,
+static int __devinit apc_probe(struct platform_device *op,
 			       const struct of_device_id *match)
 {
 	int err;
@@ -184,7 +184,7 @@ static struct of_platform_driver apc_driver = {
 
 static int __init apc_init(void)
 {
-	return of_register_driver(&apc_driver, &of_bus_type);
+	return of_register_platform_driver(&apc_driver);
 }
 
 /* This driver is not critical to the boot process
diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index ddc84128b3c..3efd3c5af6a 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -102,7 +102,8 @@ static struct of_device_id __initdata auxio_match[] = {
 
 MODULE_DEVICE_TABLE(of, auxio_match);
 
-static int __devinit auxio_probe(struct of_device *dev, const struct of_device_id *match)
+static int __devinit auxio_probe(struct platform_device *dev,
+				 const struct of_device_id *match)
 {
 	struct device_node *dp = dev->dev.of_node;
 	unsigned long size;
@@ -142,7 +143,7 @@ static struct of_platform_driver auxio_driver = {
 
 static int __init auxio_init(void)
 {
-	return of_register_driver(&auxio_driver, &of_platform_bus_type);
+	return of_register_platform_driver(&auxio_driver);
 }
 
 /* Must be after subsys_initcall() so that busses are probed.  Must
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 434335f6582..cfa2624c533 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -59,7 +59,7 @@ static int __devinit clock_board_calc_nslots(struct clock_board *p)
 	}
 }
 
-static int __devinit clock_board_probe(struct of_device *op,
+static int __devinit clock_board_probe(struct platform_device *op,
 				       const struct of_device_id *match)
 {
 	struct clock_board *p = kzalloc(sizeof(*p), GFP_KERNEL);
@@ -157,7 +157,7 @@ static struct of_platform_driver clock_board_driver = {
 	},
 };
 
-static int __devinit fhc_probe(struct of_device *op,
+static int __devinit fhc_probe(struct platform_device *op,
 			       const struct of_device_id *match)
 {
 	struct fhc *p = kzalloc(sizeof(*p), GFP_KERNEL);
@@ -265,8 +265,8 @@ static struct of_platform_driver fhc_driver = {
 
 static int __init sunfire_init(void)
 {
-	(void) of_register_driver(&fhc_driver, &of_platform_bus_type);
-	(void) of_register_driver(&clock_board_driver, &of_platform_bus_type);
+	(void) of_register_platform_driver(&fhc_driver);
+	(void) of_register_platform_driver(&clock_board_driver);
 	return 0;
 }
 
diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c
index 870cb65b3f2..08c466ebb32 100644
--- a/arch/sparc/kernel/chmc.c
+++ b/arch/sparc/kernel/chmc.c
@@ -392,7 +392,7 @@ static void __devinit jbusmc_construct_dimm_groups(struct jbusmc *p,
 	}
 }
 
-static int __devinit jbusmc_probe(struct of_device *op,
+static int __devinit jbusmc_probe(struct platform_device *op,
 				  const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *mem_regs;
@@ -690,7 +690,7 @@ static void chmc_fetch_decode_regs(struct chmc *p)
 				      chmc_read_mcreg(p, CHMCTRL_DECODE4));
 }
 
-static int __devinit chmc_probe(struct of_device *op,
+static int __devinit chmc_probe(struct platform_device *op,
 				const struct of_device_id *match)
 {
 	struct device_node *dp = op->dev.of_node;
@@ -765,7 +765,7 @@ out_free:
 	goto out;
 }
 
-static int __devinit us3mc_probe(struct of_device *op,
+static int __devinit us3mc_probe(struct platform_device *op,
 				const struct of_device_id *match)
 {
 	if (mc_type == MC_TYPE_SAFARI)
@@ -775,21 +775,21 @@ static int __devinit us3mc_probe(struct of_device *op,
 	return -ENODEV;
 }
 
-static void __devexit chmc_destroy(struct of_device *op, struct chmc *p)
+static void __devexit chmc_destroy(struct platform_device *op, struct chmc *p)
 {
 	list_del(&p->list);
 	of_iounmap(&op->resource[0], p->regs, 0x48);
 	kfree(p);
 }
 
-static void __devexit jbusmc_destroy(struct of_device *op, struct jbusmc *p)
+static void __devexit jbusmc_destroy(struct platform_device *op, struct jbusmc *p)
 {
 	mc_list_del(&p->list);
 	of_iounmap(&op->resource[0], p->regs, JBUSMC_REGS_SIZE);
 	kfree(p);
 }
 
-static int __devexit us3mc_remove(struct of_device *op)
+static int __devexit us3mc_remove(struct platform_device *op)
 {
 	void *p = dev_get_drvdata(&op->dev);
 
@@ -848,7 +848,7 @@ static int __init us3mc_init(void)
 	ret = register_dimm_printer(us3mc_dimm_printer);
 
 	if (!ret) {
-		ret = of_register_driver(&us3mc_driver, &of_bus_type);
+		ret = of_register_platform_driver(&us3mc_driver);
 		if (ret)
 			unregister_dimm_printer(us3mc_dimm_printer);
 	}
@@ -859,7 +859,7 @@ static void __exit us3mc_cleanup(void)
 {
 	if (us3mc_platform()) {
 		unregister_dimm_printer(us3mc_dimm_printer);
-		of_unregister_driver(&us3mc_driver);
+		of_unregister_platform_driver(&us3mc_driver);
 	}
 }
 
diff --git a/arch/sparc/kernel/helpers.S b/arch/sparc/kernel/helpers.S
index 92090cc9e82..314dd0c9fc5 100644
--- a/arch/sparc/kernel/helpers.S
+++ b/arch/sparc/kernel/helpers.S
@@ -46,81 +46,6 @@ stack_trace_flush:
 	 nop
 	.size		stack_trace_flush,.-stack_trace_flush
 
-#ifdef CONFIG_PERF_EVENTS
-	.globl		perf_arch_fetch_caller_regs
-	.type		perf_arch_fetch_caller_regs,#function
-perf_arch_fetch_caller_regs:
-	/* We always read the %pstate into %o5 since we will use
-	 * that to construct a fake %tstate to store into the regs.
-	 */
-	rdpr		%pstate, %o5
-	brz,pn		%o2, 50f
-	 mov		%o2, %g7
-
-	/* Turn off interrupts while we walk around the register
-	 * window by hand.
-	 */
-	wrpr		%o5, PSTATE_IE, %pstate
-
-	/* The %canrestore tells us how many register windows are
-	 * still live in the chip above us, past that we have to
-	 * walk the frame as saved on the stack.   We stash away
-	 * the %cwp in %g1 so we can return back to the original
-	 * register window.
-	 */
-	rdpr		%cwp, %g1
-	rdpr		%canrestore, %g2
-	sub		%g1, 1, %g3
-
-	/* We have the skip count in %g7, if it hits zero then
-	 * %fp/%i7 are the registers we need.  Otherwise if our
-	 * %canrestore count maintained in %g2 hits zero we have
-	 * to start traversing the stack.
-	 */
-10:	brz,pn		%g2, 4f
-	 sub		%g2, 1, %g2
-	wrpr		%g3, %cwp
-	subcc		%g7, 1, %g7
-	bne,pt		%xcc, 10b
-	 sub		%g3, 1, %g3
-
-	/* We found the values we need in the cpu's register
-	 * windows.
-	 */
-	mov		%fp, %g3
-	ba,pt		%xcc, 3f
-	 mov		%i7, %g2
-
-50:	mov		%fp, %g3
-	ba,pt		%xcc, 2f
-	 mov		%i7, %g2
-
-	/* We hit the end of the valid register windows in the
-	 * cpu, start traversing the stack frame.
-	 */
-4:	mov		%fp, %g3
-
-20:	ldx		[%g3 + STACK_BIAS + RW_V9_I7], %g2
-	subcc		%g7, 1, %g7
-	bne,pn		%xcc, 20b
-	 ldx		[%g3 + STACK_BIAS + RW_V9_I6], %g3
-
-	/* Restore the current register window position and
-	 * re-enable interrupts.
-	 */
-3:	wrpr		%g1, %cwp
-	wrpr		%o5, %pstate
-
-2:	stx		%g3, [%o0 + PT_V9_FP]
-	sllx		%o5, 8, %o5
-	stx		%o5, [%o0 + PT_V9_TSTATE]
-	stx		%g2, [%o0 + PT_V9_TPC]
-	add		%g2, 4, %g2
-	retl
-	 stx		%g2, [%o0 + PT_V9_TNPC]
-	.size		perf_arch_fetch_caller_regs,.-perf_arch_fetch_caller_regs
-#endif /* CONFIG_PERF_EVENTS */
-
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 	.type		hard_smp_processor_id,#function
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 703e4aa9bc3..41f7e4e0f72 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -253,7 +253,7 @@ EXPORT_SYMBOL(sbus_set_sbus64);
 static void *sbus_alloc_coherent(struct device *dev, size_t len,
 				 dma_addr_t *dma_addrp, gfp_t gfp)
 {
-	struct of_device *op = to_of_device(dev);
+	struct platform_device *op = to_platform_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
 	struct resource *res;
diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 47e63f1e719..2d055a1e9cc 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -241,10 +241,10 @@ static int __init use_1to1_mapping(struct device_node *pp)
 
 static int of_resource_verbose;
 
-static void __init build_device_resources(struct of_device *op,
+static void __init build_device_resources(struct platform_device *op,
 					  struct device *parent)
 {
-	struct of_device *p_op;
+	struct platform_device *p_op;
 	struct of_bus *bus;
 	int na, ns;
 	int index, num_reg;
@@ -253,7 +253,7 @@ static void __init build_device_resources(struct of_device *op,
 	if (!parent)
 		return;
 
-	p_op = to_of_device(parent);
+	p_op = to_platform_device(parent);
 	bus = of_match_bus(p_op->dev.of_node);
 	bus->count_cells(op->dev.of_node, &na, &ns);
 
@@ -267,6 +267,8 @@ static void __init build_device_resources(struct of_device *op,
 	/* Conver to num-entries.  */
 	num_reg /= na + ns;
 
+	op->resource = op->archdata.resource;
+	op->num_resources = num_reg;
 	for (index = 0; index < num_reg; index++) {
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
@@ -333,10 +335,10 @@ static void __init build_device_resources(struct of_device *op,
 	}
 }
 
-static struct of_device * __init scan_one_device(struct device_node *dp,
+static struct platform_device * __init scan_one_device(struct device_node *dp,
 						 struct device *parent)
 {
-	struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
+	struct platform_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
 	const struct linux_prom_irqs *intr;
 	struct dev_archdata *sd;
 	int len, i;
@@ -349,27 +351,21 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 
 	op->dev.of_node = dp;
 
-	op->clock_freq = of_getintprop_default(dp, "clock-frequency",
-					       (25*1000*1000));
-	op->portid = of_getintprop_default(dp, "upa-portid", -1);
-	if (op->portid == -1)
-		op->portid = of_getintprop_default(dp, "portid", -1);
-
 	intr = of_get_property(dp, "intr", &len);
 	if (intr) {
-		op->num_irqs = len / sizeof(struct linux_prom_irqs);
-		for (i = 0; i < op->num_irqs; i++)
-			op->irqs[i] = intr[i].pri;
+		op->archdata.num_irqs = len / sizeof(struct linux_prom_irqs);
+		for (i = 0; i < op->archdata.num_irqs; i++)
+			op->archdata.irqs[i] = intr[i].pri;
 	} else {
 		const unsigned int *irq =
 			of_get_property(dp, "interrupts", &len);
 
 		if (irq) {
-			op->num_irqs = len / sizeof(unsigned int);
-			for (i = 0; i < op->num_irqs; i++)
-				op->irqs[i] = irq[i];
+			op->archdata.num_irqs = len / sizeof(unsigned int);
+			for (i = 0; i < op->archdata.num_irqs; i++)
+				op->archdata.irqs[i] = irq[i];
 		} else {
-			op->num_irqs = 0;
+			op->archdata.num_irqs = 0;
 		}
 	}
 	if (sparc_cpu_model == sun4d) {
@@ -411,8 +407,8 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 			goto build_resources;
 		}
 
-		for (i = 0; i < op->num_irqs; i++) {
-			int this_irq = op->irqs[i];
+		for (i = 0; i < op->archdata.num_irqs; i++) {
+			int this_irq = op->archdata.irqs[i];
 			int sbusl = pil_to_sbus[this_irq];
 
 			if (sbusl)
@@ -420,7 +416,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 					    (sbusl << 2) +
 					    slot);
 
-			op->irqs[i] = this_irq;
+			op->archdata.irqs[i] = this_irq;
 		}
 	}
 
@@ -428,7 +424,7 @@ build_resources:
 	build_device_resources(op, parent);
 
 	op->dev.parent = parent;
-	op->dev.bus = &of_platform_bus_type;
+	op->dev.bus = &platform_bus_type;
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
@@ -447,7 +443,7 @@ build_resources:
 static void __init scan_tree(struct device_node *dp, struct device *parent)
 {
 	while (dp) {
-		struct of_device *op = scan_one_device(dp, parent);
+		struct platform_device *op = scan_one_device(dp, parent);
 
 		if (op)
 			scan_tree(dp->child, &op->dev);
@@ -456,30 +452,19 @@ static void __init scan_tree(struct device_node *dp, struct device *parent)
 	}
 }
 
-static void __init scan_of_devices(void)
+static int __init scan_of_devices(void)
 {
 	struct device_node *root = of_find_node_by_path("/");
-	struct of_device *parent;
+	struct platform_device *parent;
 
 	parent = scan_one_device(root, NULL);
 	if (!parent)
-		return;
+		return 0;
 
 	scan_tree(root->child, &parent->dev);
+	return 0;
 }
-
-static int __init of_bus_driver_init(void)
-{
-	int err;
-
-	err = of_bus_type_init(&of_platform_bus_type, "of");
-	if (!err)
-		scan_of_devices();
-
-	return err;
-}
-
-postcore_initcall(of_bus_driver_init);
+postcore_initcall(scan_of_devices);
 
 static int __init of_debug(char *str)
 {
diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c
index 1dae8079f72..63cd4e5d47c 100644
--- a/arch/sparc/kernel/of_device_64.c
+++ b/arch/sparc/kernel/of_device_64.c
@@ -310,10 +310,10 @@ static int __init use_1to1_mapping(struct device_node *pp)
 
 static int of_resource_verbose;
 
-static void __init build_device_resources(struct of_device *op,
+static void __init build_device_resources(struct platform_device *op,
 					  struct device *parent)
 {
-	struct of_device *p_op;
+	struct platform_device *p_op;
 	struct of_bus *bus;
 	int na, ns;
 	int index, num_reg;
@@ -322,7 +322,7 @@ static void __init build_device_resources(struct of_device *op,
 	if (!parent)
 		return;
 
-	p_op = to_of_device(parent);
+	p_op = to_platform_device(parent);
 	bus = of_match_bus(p_op->dev.of_node);
 	bus->count_cells(op->dev.of_node, &na, &ns);
 
@@ -344,6 +344,8 @@ static void __init build_device_resources(struct of_device *op,
 		num_reg = PROMREG_MAX;
 	}
 
+	op->resource = op->archdata.resource;
+	op->num_resources = num_reg;
 	for (index = 0; index < num_reg; index++) {
 		struct resource *r = &op->resource[index];
 		u32 addr[OF_MAX_ADDR_CELLS];
@@ -526,7 +528,7 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp,
 
 static int of_irq_verbose;
 
-static unsigned int __init build_one_device_irq(struct of_device *op,
+static unsigned int __init build_one_device_irq(struct platform_device *op,
 						struct device *parent,
 						unsigned int irq)
 {
@@ -628,10 +630,10 @@ out:
 	return irq;
 }
 
-static struct of_device * __init scan_one_device(struct device_node *dp,
+static struct platform_device * __init scan_one_device(struct device_node *dp,
 						 struct device *parent)
 {
-	struct of_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
+	struct platform_device *op = kzalloc(sizeof(*op), GFP_KERNEL);
 	const unsigned int *irq;
 	struct dev_archdata *sd;
 	int len, i;
@@ -644,34 +646,28 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 
 	op->dev.of_node = dp;
 
-	op->clock_freq = of_getintprop_default(dp, "clock-frequency",
-					       (25*1000*1000));
-	op->portid = of_getintprop_default(dp, "upa-portid", -1);
-	if (op->portid == -1)
-		op->portid = of_getintprop_default(dp, "portid", -1);
-
 	irq = of_get_property(dp, "interrupts", &len);
 	if (irq) {
-		op->num_irqs = len / 4;
+		op->archdata.num_irqs = len / 4;
 
 		/* Prevent overrunning the op->irqs[] array.  */
-		if (op->num_irqs > PROMINTR_MAX) {
+		if (op->archdata.num_irqs > PROMINTR_MAX) {
 			printk(KERN_WARNING "%s: Too many irqs (%d), "
 			       "limiting to %d.\n",
-			       dp->full_name, op->num_irqs, PROMINTR_MAX);
-			op->num_irqs = PROMINTR_MAX;
+			       dp->full_name, op->archdata.num_irqs, PROMINTR_MAX);
+			op->archdata.num_irqs = PROMINTR_MAX;
 		}
-		memcpy(op->irqs, irq, op->num_irqs * 4);
+		memcpy(op->archdata.irqs, irq, op->archdata.num_irqs * 4);
 	} else {
-		op->num_irqs = 0;
+		op->archdata.num_irqs = 0;
 	}
 
 	build_device_resources(op, parent);
-	for (i = 0; i < op->num_irqs; i++)
-		op->irqs[i] = build_one_device_irq(op, parent, op->irqs[i]);
+	for (i = 0; i < op->archdata.num_irqs; i++)
+		op->archdata.irqs[i] = build_one_device_irq(op, parent, op->archdata.irqs[i]);
 
 	op->dev.parent = parent;
-	op->dev.bus = &of_platform_bus_type;
+	op->dev.bus = &platform_bus_type;
 	if (!parent)
 		dev_set_name(&op->dev, "root");
 	else
@@ -690,7 +686,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 static void __init scan_tree(struct device_node *dp, struct device *parent)
 {
 	while (dp) {
-		struct of_device *op = scan_one_device(dp, parent);
+		struct platform_device *op = scan_one_device(dp, parent);
 
 		if (op)
 			scan_tree(dp->child, &op->dev);
@@ -699,30 +695,19 @@ static void __init scan_tree(struct device_node *dp, struct device *parent)
 	}
 }
 
-static void __init scan_of_devices(void)
+static int __init scan_of_devices(void)
 {
 	struct device_node *root = of_find_node_by_path("/");
-	struct of_device *parent;
+	struct platform_device *parent;
 
 	parent = scan_one_device(root, NULL);
 	if (!parent)
-		return;
+		return 0;
 
 	scan_tree(root->child, &parent->dev);
+	return 0;
 }
-
-static int __init of_bus_driver_init(void)
-{
-	int err;
-
-	err = of_bus_type_init(&of_platform_bus_type, "of");
-	if (!err)
-		scan_of_devices();
-
-	return err;
-}
-
-postcore_initcall(of_bus_driver_init);
+postcore_initcall(scan_of_devices);
 
 static int __init of_debug(char *str)
 {
diff --git a/arch/sparc/kernel/of_device_common.c b/arch/sparc/kernel/of_device_common.c
index 10c6c36a6e7..49ddff56cb0 100644
--- a/arch/sparc/kernel/of_device_common.c
+++ b/arch/sparc/kernel/of_device_common.c
@@ -11,48 +11,28 @@
 
 #include "of_device_common.h"
 
-static int node_match(struct device *dev, void *data)
-{
-	struct of_device *op = to_of_device(dev);
-	struct device_node *dp = data;
-
-	return (op->dev.of_node == dp);
-}
-
-struct of_device *of_find_device_by_node(struct device_node *dp)
-{
-	struct device *dev = bus_find_device(&of_platform_bus_type, NULL,
-					     dp, node_match);
-
-	if (dev)
-		return to_of_device(dev);
-
-	return NULL;
-}
-EXPORT_SYMBOL(of_find_device_by_node);
-
 unsigned int irq_of_parse_and_map(struct device_node *node, int index)
 {
-	struct of_device *op = of_find_device_by_node(node);
+	struct platform_device *op = of_find_device_by_node(node);
 
-	if (!op || index >= op->num_irqs)
+	if (!op || index >= op->archdata.num_irqs)
 		return 0;
 
-	return op->irqs[index];
+	return op->archdata.irqs[index];
 }
 EXPORT_SYMBOL(irq_of_parse_and_map);
 
 /* Take the archdata values for IOMMU, STC, and HOSTDATA found in
- * BUS and propagate to all child of_device objects.
+ * BUS and propagate to all child platform_device objects.
  */
-void of_propagate_archdata(struct of_device *bus)
+void of_propagate_archdata(struct platform_device *bus)
 {
 	struct dev_archdata *bus_sd = &bus->dev.archdata;
 	struct device_node *bus_dp = bus->dev.of_node;
 	struct device_node *dp;
 
 	for (dp = bus_dp->child; dp; dp = dp->sibling) {
-		struct of_device *op = of_find_device_by_node(dp);
+		struct platform_device *op = of_find_device_by_node(dp);
 
 		op->dev.archdata.iommu = bus_sd->iommu;
 		op->dev.archdata.stc = bus_sd->stc;
@@ -64,9 +44,6 @@ void of_propagate_archdata(struct of_device *bus)
 	}
 }
 
-struct bus_type of_platform_bus_type;
-EXPORT_SYMBOL(of_platform_bus_type);
-
 static void get_cells(struct device_node *dp, int *addrc, int *sizec)
 {
 	if (addrc)
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 8a8363adb8b..4137579d9ad 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -198,7 +198,7 @@ static unsigned long pci_parse_of_flags(u32 addr0)
  * into physical address resources, we only have to figure out the register
  * mapping.
  */
-static void pci_parse_of_addrs(struct of_device *op,
+static void pci_parse_of_addrs(struct platform_device *op,
 			       struct device_node *node,
 			       struct pci_dev *dev)
 {
@@ -248,7 +248,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 {
 	struct dev_archdata *sd;
 	struct pci_slot *slot;
-	struct of_device *op;
+	struct platform_device *op;
 	struct pci_dev *dev;
 	const char *type;
 	u32 class;
@@ -340,7 +340,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
 		dev->rom_base_reg = PCI_ROM_ADDRESS;
 
-		dev->irq = sd->op->irqs[0];
+		dev->irq = sd->op->archdata.irqs[0];
 		if (dev->irq == 0xffffffff)
 			dev->irq = PCI_IRQ_NONE;
 	}
diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c
index 51cfa09e392..efb896d6875 100644
--- a/arch/sparc/kernel/pci_fire.c
+++ b/arch/sparc/kernel/pci_fire.c
@@ -410,7 +410,7 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm)
 }
 
 static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
-				       struct of_device *op, u32 portid)
+				       struct platform_device *op, u32 portid)
 {
 	const struct linux_prom64_registers *regs;
 	struct device_node *dp = op->dev.of_node;
@@ -455,7 +455,7 @@ static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
 	return 0;
 }
 
-static int __devinit fire_probe(struct of_device *op,
+static int __devinit fire_probe(struct platform_device *op,
 				const struct of_device_id *match)
 {
 	struct device_node *dp = op->dev.of_node;
@@ -518,7 +518,7 @@ static struct of_platform_driver fire_driver = {
 
 static int __init fire_init(void)
 {
-	return of_register_driver(&fire_driver, &of_bus_type);
+	return of_register_platform_driver(&fire_driver);
 }
 
 subsys_initcall(fire_init);
diff --git a/arch/sparc/kernel/pci_impl.h b/arch/sparc/kernel/pci_impl.h
index 03186824327..e20ed5f06e9 100644
--- a/arch/sparc/kernel/pci_impl.h
+++ b/arch/sparc/kernel/pci_impl.h
@@ -91,7 +91,7 @@ struct pci_pbm_info {
 	char				*name;
 
 	/* OBP specific information. */
-	struct of_device		*op;
+	struct platform_device		*op;
 	u64				ino_bitmap;
 
 	/* PBM I/O and Memory space resources. */
diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c
index 558a7051282..22eab7cf3b1 100644
--- a/arch/sparc/kernel/pci_psycho.c
+++ b/arch/sparc/kernel/pci_psycho.c
@@ -285,7 +285,7 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
 #define  PSYCHO_ECCCTRL_CE	 0x2000000000000000UL /* Enable CE INterrupts */
 static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
+	struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
 	int err;
@@ -302,23 +302,23 @@ static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
 	 * 5: POWER MANAGEMENT
 	 */
 
-	if (op->num_irqs < 6)
+	if (op->archdata.num_irqs < 6)
 		return;
 
 	/* We really mean to ignore the return result here.  Two
 	 * PCI controller share the same interrupt numbers and
 	 * drive the same front-end hardware.
 	 */
-	err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
+	err = request_irq(op->archdata.irqs[1], psycho_ue_intr, IRQF_SHARED,
 			  "PSYCHO_UE", pbm);
-	err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
+	err = request_irq(op->archdata.irqs[2], psycho_ce_intr, IRQF_SHARED,
 			  "PSYCHO_CE", pbm);
 
 	/* This one, however, ought not to fail.  We can just warn
 	 * about it since the system can still operate properly even
 	 * if this fails.
 	 */
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
+	err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, IRQF_SHARED,
 			  "PSYCHO_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Could not register PCIERR, "
@@ -483,7 +483,7 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
 #define PSYCHO_MEMSPACE_SIZE	0x07fffffffUL
 
 static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm,
-				      struct of_device *op, int is_pbm_a)
+				      struct platform_device *op, int is_pbm_a)
 {
 	psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO);
 	psycho_pbm_strbuf_init(pbm, is_pbm_a);
@@ -503,7 +503,7 @@ static struct pci_pbm_info * __devinit psycho_find_sibling(u32 upa_portid)
 
 #define PSYCHO_CONFIGSPACE	0x001000000UL
 
-static int __devinit psycho_probe(struct of_device *op,
+static int __devinit psycho_probe(struct platform_device *op,
 				  const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *pr_regs;
@@ -612,7 +612,7 @@ static struct of_platform_driver psycho_driver = {
 
 static int __init psycho_init(void)
 {
-	return of_register_driver(&psycho_driver, &of_bus_type);
+	return of_register_platform_driver(&psycho_driver);
 }
 
 subsys_initcall(psycho_init);
diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c
index 6dad8e3b750..5c3f5ec4cab 100644
--- a/arch/sparc/kernel/pci_sabre.c
+++ b/arch/sparc/kernel/pci_sabre.c
@@ -311,7 +311,7 @@ static irqreturn_t sabre_ce_intr(int irq, void *dev_id)
 static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 {
 	struct device_node *dp = pbm->op->dev.of_node;
-	struct of_device *op;
+	struct platform_device *op;
 	unsigned long base = pbm->controller_regs;
 	u64 tmp;
 	int err;
@@ -329,7 +329,7 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 	 * 2: CE ERR
 	 * 3: POWER FAIL
 	 */
-	if (op->num_irqs < 4)
+	if (op->archdata.num_irqs < 4)
 		return;
 
 	/* We clear the error bits in the appropriate AFSR before
@@ -341,7 +341,7 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 		    SABRE_UEAFSR_SDTE | SABRE_UEAFSR_PDTE),
 		   base + SABRE_UE_AFSR);
 
-	err = request_irq(op->irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
+	err = request_irq(op->archdata.irqs[1], sabre_ue_intr, 0, "SABRE_UE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
 		       pbm->name, err);
@@ -351,11 +351,11 @@ static void sabre_register_error_handlers(struct pci_pbm_info *pbm)
 		   base + SABRE_CE_AFSR);
 
 
-	err = request_irq(op->irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
+	err = request_irq(op->archdata.irqs[2], sabre_ce_intr, 0, "SABRE_CE", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
 		       pbm->name, err);
-	err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+	err = request_irq(op->archdata.irqs[0], psycho_pcierr_intr, 0,
 			  "SABRE_PCIERR", pbm);
 	if (err)
 		printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
@@ -443,7 +443,7 @@ static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm,
 }
 
 static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
-				     struct of_device *op)
+				     struct platform_device *op)
 {
 	psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
 	pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
@@ -452,7 +452,7 @@ static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
 	sabre_scan_bus(pbm, &op->dev);
 }
 
-static int __devinit sabre_probe(struct of_device *op,
+static int __devinit sabre_probe(struct platform_device *op,
 				 const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *pr_regs;
@@ -606,7 +606,7 @@ static struct of_platform_driver sabre_driver = {
 
 static int __init sabre_init(void)
 {
-	return of_register_driver(&sabre_driver, &of_bus_type);
+	return of_register_platform_driver(&sabre_driver);
 }
 
 subsys_initcall(sabre_init);
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 97a1ae2e1c0..445a47a2fb3 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -844,7 +844,7 @@ static int pbm_routes_this_ino(struct pci_pbm_info *pbm, u32 ino)
  */
 static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
+	struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -857,14 +857,14 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 	 */
 
 	if (pbm_routes_this_ino(pbm, SCHIZO_UE_INO)) {
-		err = request_irq(op->irqs[1], schizo_ue_intr, 0,
+		err = request_irq(op->archdata.irqs[1], schizo_ue_intr, 0,
 				  "TOMATILLO_UE", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register UE, "
 			       "err=%d\n", pbm->name, err);
 	}
 	if (pbm_routes_this_ino(pbm, SCHIZO_CE_INO)) {
-		err = request_irq(op->irqs[2], schizo_ce_intr, 0,
+		err = request_irq(op->archdata.irqs[2], schizo_ce_intr, 0,
 				  "TOMATILLO_CE", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register CE, "
@@ -872,10 +872,10 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 	}
 	err = 0;
 	if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_A_INO)) {
-		err = request_irq(op->irqs[0], schizo_pcierr_intr, 0,
+		err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0,
 				  "TOMATILLO_PCIERR", pbm);
 	} else if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_B_INO)) {
-		err = request_irq(op->irqs[0], schizo_pcierr_intr, 0,
+		err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0,
 				  "TOMATILLO_PCIERR", pbm);
 	}
 	if (err)
@@ -883,7 +883,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 		       "err=%d\n", pbm->name, err);
 
 	if (pbm_routes_this_ino(pbm, SCHIZO_SERR_INO)) {
-		err = request_irq(op->irqs[3], schizo_safarierr_intr, 0,
+		err = request_irq(op->archdata.irqs[3], schizo_safarierr_intr, 0,
 				  "TOMATILLO_SERR", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register SERR, "
@@ -939,7 +939,7 @@ static void tomatillo_register_error_handlers(struct pci_pbm_info *pbm)
 
 static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 {
-	struct of_device *op = of_find_device_by_node(pbm->op->dev.of_node);
+	struct platform_device *op = of_find_device_by_node(pbm->op->dev.of_node);
 	u64 tmp, err_mask, err_no_mask;
 	int err;
 
@@ -952,14 +952,14 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 	 */
 
 	if (pbm_routes_this_ino(pbm, SCHIZO_UE_INO)) {
-		err = request_irq(op->irqs[1], schizo_ue_intr, 0,
+		err = request_irq(op->archdata.irqs[1], schizo_ue_intr, 0,
 				  "SCHIZO_UE", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register UE, "
 			       "err=%d\n", pbm->name, err);
 	}
 	if (pbm_routes_this_ino(pbm, SCHIZO_CE_INO)) {
-		err = request_irq(op->irqs[2], schizo_ce_intr, 0,
+		err = request_irq(op->archdata.irqs[2], schizo_ce_intr, 0,
 				  "SCHIZO_CE", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register CE, "
@@ -967,10 +967,10 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 	}
 	err = 0;
 	if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_A_INO)) {
-		err = request_irq(op->irqs[0], schizo_pcierr_intr, 0,
+		err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0,
 				  "SCHIZO_PCIERR", pbm);
 	} else if (pbm_routes_this_ino(pbm, SCHIZO_PCIERR_B_INO)) {
-		err = request_irq(op->irqs[0], schizo_pcierr_intr, 0,
+		err = request_irq(op->archdata.irqs[0], schizo_pcierr_intr, 0,
 				  "SCHIZO_PCIERR", pbm);
 	}
 	if (err)
@@ -978,7 +978,7 @@ static void schizo_register_error_handlers(struct pci_pbm_info *pbm)
 		       "err=%d\n", pbm->name, err);
 
 	if (pbm_routes_this_ino(pbm, SCHIZO_SERR_INO)) {
-		err = request_irq(op->irqs[3], schizo_safarierr_intr, 0,
+		err = request_irq(op->archdata.irqs[3], schizo_safarierr_intr, 0,
 				  "SCHIZO_SERR", pbm);
 		if (err)
 			printk(KERN_WARNING "%s: Could not register SERR, "
@@ -1307,7 +1307,7 @@ static void schizo_pbm_hw_init(struct pci_pbm_info *pbm)
 }
 
 static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm,
-				     struct of_device *op, u32 portid,
+				     struct platform_device *op, u32 portid,
 				     int chip_type)
 {
 	const struct linux_prom64_registers *regs;
@@ -1413,7 +1413,7 @@ static struct pci_pbm_info * __devinit schizo_find_sibling(u32 portid,
 	return NULL;
 }
 
-static int __devinit __schizo_init(struct of_device *op, unsigned long chip_type)
+static int __devinit __schizo_init(struct platform_device *op, unsigned long chip_type)
 {
 	struct device_node *dp = op->dev.of_node;
 	struct pci_pbm_info *pbm;
@@ -1460,7 +1460,7 @@ out_err:
 	return err;
 }
 
-static int __devinit schizo_probe(struct of_device *op,
+static int __devinit schizo_probe(struct platform_device *op,
 				  const struct of_device_id *match)
 {
 	return __schizo_init(op, (unsigned long) match->data);
@@ -1501,7 +1501,7 @@ static struct of_platform_driver schizo_driver = {
 
 static int __init schizo_init(void)
 {
-	return of_register_driver(&schizo_driver, &of_bus_type);
+	return of_register_platform_driver(&schizo_driver);
 }
 
 subsys_initcall(schizo_init);
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index a24af6f7e17..743344aa6d8 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -879,7 +879,7 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm)
 #endif /* !(CONFIG_PCI_MSI) */
 
 static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
-					struct of_device *op, u32 devhandle)
+					struct platform_device *op, u32 devhandle)
 {
 	struct device_node *dp = op->dev.of_node;
 	int err;
@@ -918,7 +918,7 @@ static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
 	return 0;
 }
 
-static int __devinit pci_sun4v_probe(struct of_device *op,
+static int __devinit pci_sun4v_probe(struct platform_device *op,
 				     const struct of_device_id *match)
 {
 	const struct linux_prom64_registers *regs;
@@ -1019,7 +1019,7 @@ static struct of_platform_driver pci_sun4v_driver = {
 
 static int __init pci_sun4v_init(void)
 {
-	return of_register_driver(&pci_sun4v_driver, &of_bus_type);
+	return of_register_platform_driver(&pci_sun4v_driver);
 }
 
 subsys_initcall(pci_sun4v_init);
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 44faabc3c02..357ced3c33f 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -572,18 +572,18 @@ static u64 sparc_perf_event_update(struct perf_event *event,
 	s64 delta;
 
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	new_raw_count = read_pmc(idx);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
 	delta = (new_raw_count << shift) - (prev_raw_count << shift);
 	delta >>= shift;
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
 
 	return new_raw_count;
 }
@@ -591,27 +591,27 @@ again:
 static int sparc_perf_event_set_period(struct perf_event *event,
 				       struct hw_perf_event *hwc, int idx)
 {
-	s64 left = atomic64_read(&hwc->period_left);
+	s64 left = local64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
 	int ret = 0;
 
 	if (unlikely(left <= -period)) {
 		left = period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 
 	if (unlikely(left <= 0)) {
 		left += period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 	if (left > MAX_PERIOD)
 		left = MAX_PERIOD;
 
-	atomic64_set(&hwc->prev_count, (u64)-left);
+	local64_set(&hwc->prev_count, (u64)-left);
 
 	write_pmc(idx, (u64)(-left) & 0xffffffff);
 
@@ -1006,7 +1006,7 @@ static int sparc_pmu_enable(struct perf_event *event)
 	 * skip the schedulability test here, it will be peformed
 	 * at commit time(->commit_txn) as a whole
 	 */
-	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+	if (cpuc->group_flag & PERF_EVENT_TXN)
 		goto nocheck;
 
 	if (check_excludes(cpuc->event, n0, 1))
@@ -1088,7 +1088,7 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if (!hwc->sample_period) {
 		hwc->sample_period = MAX_PERIOD;
 		hwc->last_period = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
+		local64_set(&hwc->period_left, hwc->sample_period);
 	}
 
 	return 0;
@@ -1103,7 +1103,7 @@ static void sparc_pmu_start_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
 
-	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuhw->group_flag |= PERF_EVENT_TXN;
 }
 
 /*
@@ -1115,7 +1115,7 @@ static void sparc_pmu_cancel_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
 
-	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+	cpuhw->group_flag &= ~PERF_EVENT_TXN;
 }
 
 /*
@@ -1138,6 +1138,7 @@ static int sparc_pmu_commit_txn(const struct pmu *pmu)
 	if (sparc_check_constraints(cpuc->event, cpuc->events, n))
 		return -EAGAIN;
 
+	cpuc->group_flag &= ~PERF_EVENT_TXN;
 	return 0;
 }
 
diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c
index 9589d8b9b0c..94536a85f16 100644
--- a/arch/sparc/kernel/pmc.c
+++ b/arch/sparc/kernel/pmc.c
@@ -51,7 +51,7 @@ static void pmc_swift_idle(void)
 #endif
 }
 
-static int __devinit pmc_probe(struct of_device *op,
+static int __devinit pmc_probe(struct platform_device *op,
 			       const struct of_device_id *match)
 {
 	regs = of_ioremap(&op->resource[0], 0,
@@ -89,7 +89,7 @@ static struct of_platform_driver pmc_driver = {
 
 static int __init pmc_init(void)
 {
-	return of_register_driver(&pmc_driver, &of_bus_type);
+	return of_register_platform_driver(&pmc_driver);
 }
 
 /* This driver is not critical to the boot process
diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c
index 168d4cb63f5..2c59f4d387d 100644
--- a/arch/sparc/kernel/power.c
+++ b/arch/sparc/kernel/power.c
@@ -33,10 +33,10 @@ static int __devinit has_button_interrupt(unsigned int irq, struct device_node *
 	return 1;
 }
 
-static int __devinit power_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit power_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	struct resource *res = &op->resource[0];
-	unsigned int irq= op->irqs[0];
+	unsigned int irq = op->archdata.irqs[0];
 
 	power_reg = of_ioremap(res, 0, 0x4, "power");
 
@@ -70,7 +70,7 @@ static struct of_platform_driver power_driver = {
 
 static int __init power_init(void)
 {
-	return of_register_driver(&power_driver, &of_platform_bus_type);
+	return of_register_platform_driver(&power_driver);
 }
 
 device_initcall(power_init);
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index a8591ef2636..eeb04a782ec 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -9,14 +9,6 @@ extern void irq_trans_init(struct device_node *dp);
 
 extern unsigned int prom_unique_id;
 
-static inline int is_root_node(const struct device_node *dp)
-{
-	if (!dp)
-		return 0;
-
-	return (dp->parent == NULL);
-}
-
 extern char *build_path_component(struct device_node *dp);
 extern void of_console_init(void);
 
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index 466a32763ea..86597d9867f 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -21,7 +21,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
-#include <linux/of_device.h>
+#include <linux/of.h>
 
 #include <asm/prom.h>
 #include <asm/oplib.h>
@@ -81,7 +81,7 @@ static void __init sun4v_path_component(struct device_node *dp, char *tmp_buf)
 		return;
 
 	regs = rprop->value;
-	if (!is_root_node(dp->parent)) {
+	if (!of_node_is_root(dp->parent)) {
 		sprintf(tmp_buf, "%s@%x,%x",
 			dp->name,
 			(unsigned int) (regs->phys_addr >> 32UL),
@@ -121,7 +121,7 @@ static void __init sun4u_path_component(struct device_node *dp, char *tmp_buf)
 		return;
 
 	regs = prop->value;
-	if (!is_root_node(dp->parent)) {
+	if (!of_node_is_root(dp->parent)) {
 		sprintf(tmp_buf, "%s@%x,%x",
 			dp->name,
 			(unsigned int) (regs->phys_addr >> 32UL),
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 57ac9e28be0..1f830da2ddf 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -244,7 +244,7 @@ char * __init build_full_name(struct device_node *dp)
 
 	n = prom_early_alloc(len);
 	strcpy(n, dp->parent->full_name);
-	if (!is_root_node(dp->parent)) {
+	if (!of_node_is_root(dp->parent)) {
 		strcpy(n + plen, "/");
 		plen++;
 	}
diff --git a/arch/sparc/kernel/prom_irqtrans.c b/arch/sparc/kernel/prom_irqtrans.c
index 5702ad4710c..ce651147fab 100644
--- a/arch/sparc/kernel/prom_irqtrans.c
+++ b/arch/sparc/kernel/prom_irqtrans.c
@@ -719,7 +719,7 @@ static unsigned int central_build_irq(struct device_node *dp,
 				      void *_data)
 {
 	struct device_node *central_dp = _data;
-	struct of_device *central_op = of_find_device_by_node(central_dp);
+	struct platform_device *central_op = of_find_device_by_node(central_dp);
 	struct resource *res;
 	unsigned long imap, iclr;
 	u32 tmp;
diff --git a/arch/sparc/kernel/psycho_common.c b/arch/sparc/kernel/psycho_common.c
index 3f34ac85393..fe2af66bb19 100644
--- a/arch/sparc/kernel/psycho_common.c
+++ b/arch/sparc/kernel/psycho_common.c
@@ -447,7 +447,7 @@ int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize,
 
 }
 
-void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct of_device *op,
+void psycho_pbm_init_common(struct pci_pbm_info *pbm, struct platform_device *op,
 			    const char *chip_name, int chip_type)
 {
 	struct device_node *dp = op->dev.of_node;
diff --git a/arch/sparc/kernel/psycho_common.h b/arch/sparc/kernel/psycho_common.h
index 092c278ef28..590b4ed8ab5 100644
--- a/arch/sparc/kernel/psycho_common.h
+++ b/arch/sparc/kernel/psycho_common.h
@@ -42,7 +42,7 @@ extern int psycho_iommu_init(struct pci_pbm_info *pbm, int tsbsize,
 			     unsigned long write_complete_offset);
 
 extern void psycho_pbm_init_common(struct pci_pbm_info *pbm,
-				   struct of_device *op,
+				   struct platform_device *op,
 				   const char *chip_name, int chip_type);
 
 #endif /* _PSYCHO_COMMON_H */
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index cfeaf04b9cd..2ca32d13abc 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -57,7 +57,7 @@
 void sbus_set_sbus64(struct device *dev, int bursts)
 {
 	struct iommu *iommu = dev->archdata.iommu;
-	struct of_device *op = to_of_device(dev);
+	struct platform_device *op = to_platform_device(dev);
 	const struct linux_prom_registers *regs;
 	unsigned long cfg_reg;
 	int slot;
@@ -204,7 +204,7 @@ static unsigned long sysio_imap_to_iclr(unsigned long imap)
 	return imap + diff;
 }
 
-static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino)
+static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino)
 {
 	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
@@ -267,7 +267,7 @@ static unsigned int sbus_build_irq(struct of_device *op, unsigned int ino)
 #define  SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 {
-	struct of_device *op = dev_id;
+	struct platform_device *op = dev_id;
 	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
@@ -341,7 +341,7 @@ static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
 #define  SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 {
-	struct of_device *op = dev_id;
+	struct platform_device *op = dev_id;
 	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
 	unsigned long afsr_reg, afar_reg;
@@ -420,7 +420,7 @@ static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
 #define  SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved                  */
 static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 {
-	struct of_device *op = dev_id;
+	struct platform_device *op = dev_id;
 	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long afsr_reg, afar_reg, reg_base;
 	unsigned long afsr, afar, error_bits;
@@ -488,7 +488,7 @@ static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
 #define SYSIO_CE_INO		0x35
 #define SYSIO_SBUSERR_INO	0x36
 
-static void __init sysio_register_error_handlers(struct of_device *op)
+static void __init sysio_register_error_handlers(struct platform_device *op)
 {
 	struct iommu *iommu = op->dev.archdata.iommu;
 	unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
@@ -534,7 +534,7 @@ static void __init sysio_register_error_handlers(struct of_device *op)
 }
 
 /* Boot time initialization. */
-static void __init sbus_iommu_init(struct of_device *op)
+static void __init sbus_iommu_init(struct platform_device *op)
 {
 	const struct linux_prom64_registers *pr;
 	struct device_node *dp = op->dev.of_node;
@@ -663,7 +663,7 @@ static int __init sbus_init(void)
 	struct device_node *dp;
 
 	for_each_node_by_name(dp, "sbus") {
-		struct of_device *op = of_find_device_by_node(dp);
+		struct platform_device *op = of_find_device_by_node(dp);
 
 		sbus_iommu_init(op);
 		of_propagate_archdata(op);
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index e404b063be2..9c743b1886f 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -142,7 +142,7 @@ static struct platform_device m48t59_rtc = {
 	},
 };
 
-static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit clock_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->dev.of_node;
 	const char *model = of_get_property(dp, "model", NULL);
@@ -189,7 +189,7 @@ static struct of_platform_driver clock_driver = {
 /* Probe for the mostek real time clock chip. */
 static int __init clock_init(void)
 {
-	return of_register_driver(&clock_driver, &of_platform_bus_type);
+	return of_register_platform_driver(&clock_driver);
 }
 /* Must be after subsys_initcall() so that busses are probed.  Must
  * be before device_initcall() because things like the RTC driver
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 21e9fcae066..3bc9c9979b9 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -419,7 +419,7 @@ static struct platform_device rtc_cmos_device = {
 	.num_resources	= 1,
 };
 
-static int __devinit rtc_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit rtc_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	struct resource *r;
 
@@ -477,7 +477,7 @@ static struct platform_device rtc_bq4802_device = {
 	.num_resources	= 1,
 };
 
-static int __devinit bq4802_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit bq4802_probe(struct platform_device *op, const struct of_device_id *match)
 {
 
 	printk(KERN_INFO "%s: BQ4802 regs at 0x%llx\n",
@@ -534,7 +534,7 @@ static struct platform_device m48t59_rtc = {
 	},
 };
 
-static int __devinit mostek_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit mostek_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	struct device_node *dp = op->dev.of_node;
 
@@ -586,9 +586,9 @@ static int __init clock_init(void)
 	if (tlb_type == hypervisor)
 		return platform_device_register(&rtc_sun4v_device);
 
-	(void) of_register_driver(&rtc_driver, &of_platform_bus_type);
-	(void) of_register_driver(&mostek_driver, &of_platform_bus_type);
-	(void) of_register_driver(&bq4802_driver, &of_platform_bus_type);
+	(void) of_register_platform_driver(&rtc_driver);
+	(void) of_register_platform_driver(&mostek_driver);
+	(void) of_register_platform_driver(&bq4802_driver);
 
 	return 0;
 }
diff --git a/arch/sparc/mm/highmem.c b/arch/sparc/mm/highmem.c
index 7916feba6e4..e139e9cbf5f 100644
--- a/arch/sparc/mm/highmem.c
+++ b/arch/sparc/mm/highmem.c
@@ -65,7 +65,7 @@ void *kmap_atomic(struct page *page, enum km_type type)
 }
 EXPORT_SYMBOL(kmap_atomic);
 
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 #ifdef CONFIG_DEBUG_HIGHMEM
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
@@ -100,7 +100,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_notypecheck);
 
 /* We may be fed a pagetable here by ptep_to_xxx and others. */
 struct page *kmap_atomic_to_page(void *ptr)
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index 005e758a4db..fc58c3e917d 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -35,7 +35,7 @@
 #define IOPERM        (IOUPTE_CACHE | IOUPTE_WRITE | IOUPTE_VALID)
 #define MKIOPTE(phys) __iopte((((phys)>>4) & IOUPTE_PAGE) | IOPERM)
 
-static void __init iounit_iommu_init(struct of_device *op)
+static void __init iounit_iommu_init(struct platform_device *op)
 {
 	struct iounit_struct *iounit;
 	iopte_t *xpt, *xptend;
@@ -74,7 +74,7 @@ static int __init iounit_init(void)
 	struct device_node *dp;
 
 	for_each_node_by_name(dp, "sbi") {
-		struct of_device *op = of_find_device_by_node(dp);
+		struct platform_device *op = of_find_device_by_node(dp);
 
 		iounit_iommu_init(op);
 		of_propagate_archdata(op);
diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c
index b2e6e73888b..07fc6a65d9b 100644
--- a/arch/sparc/mm/iommu.c
+++ b/arch/sparc/mm/iommu.c
@@ -56,14 +56,14 @@ static pgprot_t dvma_prot;		/* Consistent mapping pte flags */
 #define IOPERM        (IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID)
 #define MKIOPTE(pfn, perm) (((((pfn)<<8) & IOPTE_PAGE) | (perm)) & ~IOPTE_WAZ)
 
-static void __init sbus_iommu_init(struct of_device *op)
+static void __init sbus_iommu_init(struct platform_device *op)
 {
 	struct iommu_struct *iommu;
 	unsigned int impl, vers;
 	unsigned long *bitmap;
 	unsigned long tmp;
 
-	iommu = kmalloc(sizeof(struct iommu_struct), GFP_ATOMIC);
+	iommu = kmalloc(sizeof(struct iommu_struct), GFP_KERNEL);
 	if (!iommu) {
 		prom_printf("Unable to allocate iommu structure\n");
 		prom_halt();
@@ -132,7 +132,7 @@ static int __init iommu_init(void)
 	struct device_node *dp;
 
 	for_each_node_by_name(dp, "iommu") {
-		struct of_device *op = of_find_device_by_node(dp);
+		struct platform_device *op = of_find_device_by_node(dp);
 
 		sbus_iommu_init(op);
 		of_propagate_archdata(op);
diff --git a/arch/tile/Kbuild b/arch/tile/Kbuild
new file mode 100644
index 00000000000..a9b92271609
--- /dev/null
+++ b/arch/tile/Kbuild
@@ -0,0 +1,3 @@
+
+obj-y += kernel/
+obj-y += mm/
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
new file mode 100644
index 00000000000..1eb308cb711
--- /dev/null
+++ b/arch/tile/Kconfig
@@ -0,0 +1,356 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+
+config MMU
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config GENERIC_HARDIRQS
+	def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
+config GENERIC_IRQ_PROBE
+	def_bool y
+
+config GENERIC_PENDING_IRQ
+	def_bool y
+	depends on GENERIC_HARDIRQS && SMP
+
+config SEMAPHORE_SLEEPERS
+	def_bool y
+
+config HAVE_ARCH_ALLOC_REMAP
+	def_bool y
+
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+        def_bool y
+
+config SYS_SUPPORTS_HUGETLBFS
+	def_bool y
+
+config GENERIC_TIME
+	def_bool y
+
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
+# FIXME: tilegx can implement a more efficent rwsem.
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+# We have a very flat architecture from a migration point of view,
+# so save boot time by presetting this (particularly useful on tile-sim).
+config DEFAULT_MIGRATION_COST
+	int
+	default "10000000"
+
+# We only support gcc 4.4 and above, so this should work.
+config ARCH_SUPPORTS_OPTIMIZED_INLINING
+	def_bool y
+
+config ARCH_PHYS_ADDR_T_64BIT
+	def_bool y
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+	select STACKTRACE
+
+# We use discontigmem for now; at some point we may want to switch
+# to sparsemem (Tilera bug 7996).
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool y
+
+config ARCH_DISCONTIGMEM_DEFAULT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config STRICT_DEVMEM
+	def_bool y
+
+# SMP is required for Tilera Linux.
+config SMP
+	def_bool y
+
+# Allow checking for compile-time determined overflow errors in
+# copy_from_user().  There are still unprovable places in the
+# generic code as of 2.6.34, so this option is not really compatible
+# with -Werror, which is more useful in general.
+config DEBUG_COPY_FROM_USER
+	def_bool n
+
+config HVC_TILE
+	select HVC_DRIVER
+	def_bool y
+
+config TILE
+	def_bool y
+	select GENERIC_FIND_FIRST_BIT
+	select GENERIC_FIND_NEXT_BIT
+	select USE_GENERIC_SMP_HELPERS
+	select CC_OPTIMIZE_FOR_SIZE
+
+# FIXME: investigate whether we need/want these options.
+#	select HAVE_IOREMAP_PROT
+#       select HAVE_OPTPROBES
+#       select HAVE_REGS_AND_STACK_ACCESS_API
+#       select HAVE_HW_BREAKPOINT
+#       select PERF_EVENTS
+#       select HAVE_USER_RETURN_NOTIFIER
+#       config NO_BOOTMEM
+#       config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+#       config HUGETLB_PAGE_SIZE_VARIABLE
+
+
+mainmenu "Linux/TILE Kernel Configuration"
+
+# Please note: TILE-Gx support is not yet finalized; this is
+# the preliminary support.  TILE-Gx drivers are only provided
+# with the alpha or beta test versions for Tilera customers.
+config TILEGX
+	depends on EXPERIMENTAL
+	bool "Building with TILE-Gx (64-bit) compiler and toolchain"
+
+config 64BIT
+	depends on TILEGX
+	def_bool y
+
+config ARCH_DEFCONFIG
+	string
+	default "arch/tile/configs/tile_defconfig" if !TILEGX
+	default "arch/tile/configs/tilegx_defconfig" if TILEGX
+
+source "init/Kconfig"
+
+menu "Tilera-specific configuration"
+
+config NR_CPUS
+	int "Maximum number of tiles (2-255)"
+	range 2 255
+	depends on SMP
+	default "64"
+	---help---
+	  Building with 64 is the recommended value, but a slightly
+	  smaller kernel memory footprint results from using a smaller
+	  value on chips with fewer tiles.
+
+source "kernel/time/Kconfig"
+
+source "kernel/Kconfig.hz"
+
+config KEXEC
+	bool "kexec system call"
+	---help---
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   It is used
+	  to implement the "mboot" Tilera booter.
+
+	  The name comes from the similarity to the exec system call.
+
+config COMPAT
+	bool "Support 32-bit TILE-Gx binaries in addition to 64-bit"
+	depends on TILEGX
+	select COMPAT_BINFMT_ELF
+	default y
+	---help---
+	  If enabled, the kernel will support running TILE-Gx binaries
+	  that were built with the -m32 option.
+
+config SYSVIPC_COMPAT
+	def_bool y
+	depends on COMPAT && SYSVIPC
+
+# We do not currently support disabling HIGHMEM on tile64 and tilepro.
+config HIGHMEM
+	bool # "Support for more than 512 MB of RAM"
+	default !TILEGX
+	---help---
+	  Linux can use the full amount of RAM in the system by
+	  default.  However, the address space of TILE processors is
+	  only 4 Gigabytes large. That means that, if you have a large
+	  amount of physical memory, not all of it can be "permanently
+	  mapped" by the kernel. The physical memory that's not
+	  permanently mapped is called "high memory".
+
+	  If you are compiling a kernel which will never run on a
+	  machine with more than 512 MB total physical RAM, answer
+	  "false" here. This will result in the kernel mapping all of
+	  physical memory into the top 1 GB of virtual memory space.
+
+	  If unsure, say "true".
+
+# We do not currently support disabling NUMA.
+config NUMA
+	bool # "NUMA Memory Allocation and Scheduler Support"
+	depends on SMP && DISCONTIGMEM
+	default y
+	---help---
+	  NUMA memory allocation is required for TILE processors
+	  unless booting with memory striping enabled in the
+	  hypervisor, or with only a single memory controller.
+	  It is recommended that this option always be enabled.
+
+config NODES_SHIFT
+	int "Log base 2 of the max number of memory controllers"
+	default 2
+	depends on NEED_MULTIPLE_NODES
+	---help---
+	  By default, 2, i.e. 2^2 == 4 DDR2 controllers.
+	  In a system with more controllers, this value should be raised.
+
+# Need 16MB areas to enable hugetlb
+# See build-time check in arch/tile/mm/init.c.
+config FORCE_MAX_ZONEORDER
+	int
+	default 9
+
+choice
+	depends on !TILEGX
+	prompt "Memory split" if EMBEDDED
+	default VMSPLIT_3G
+	---help---
+	  Select the desired split between kernel and user memory.
+
+	  If the address range available to the kernel is less than the
+	  physical memory installed, the remaining memory will be available
+	  as "high memory". Accessing high memory is a little more costly
+	  than low memory, as it needs to be mapped into the kernel first.
+	  Note that increasing the kernel address space limits the range
+	  available to user programs, making the address space there
+	  tighter.  Selecting anything other than the default 3G/1G split
+	  will also likely make your kernel incompatible with binary-only
+	  kernel modules.
+
+	  If you are not absolutely sure what you are doing, leave this
+	  option alone!
+
+	config VMSPLIT_375G
+		bool "3.75G/0.25G user/kernel split (no kernel networking)"
+	config VMSPLIT_35G
+		bool "3.5G/0.5G user/kernel split"
+	config VMSPLIT_3G
+		bool "3G/1G user/kernel split"
+	config VMSPLIT_3G_OPT
+		bool "3G/1G user/kernel split (for full 1G low memory)"
+	config VMSPLIT_2G
+		bool "2G/2G user/kernel split"
+	config VMSPLIT_1G
+		bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default 0xF0000000 if VMSPLIT_375G
+	default 0xE0000000 if VMSPLIT_35G
+	default 0xB0000000 if VMSPLIT_3G_OPT
+	default 0x80000000 if VMSPLIT_2G
+	default 0x40000000 if VMSPLIT_1G
+	default 0xC0000000
+
+source "mm/Kconfig"
+
+config CMDLINE_BOOL
+	bool "Built-in kernel command line"
+	default n
+	---help---
+	  Allow for specifying boot arguments to the kernel at
+	  build time.  On some systems (e.g. embedded ones), it is
+	  necessary or convenient to provide some or all of the
+	  kernel boot arguments with the kernel itself (that is,
+	  to not rely on the boot loader to provide them.)
+
+	  To compile command line arguments into the kernel,
+	  set this option to 'Y', then fill in the
+	  the boot arguments in CONFIG_CMDLINE.
+
+	  Systems with fully functional boot loaders (e.g. mboot, or
+	  if booting over PCI) should leave this option set to 'N'.
+
+config CMDLINE
+	string "Built-in kernel command string"
+	depends on CMDLINE_BOOL
+	default ""
+	---help---
+	  Enter arguments here that should be compiled into the kernel
+	  image and used at boot time.  If the boot loader provides a
+	  command line at boot time, it is appended to this string to
+	  form the full kernel command line, when the system boots.
+
+	  However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+	  change this behavior.
+
+	  In most cases, the command line (whether built-in or provided
+	  by the boot loader) should specify the device for the root
+	  file system.
+
+config CMDLINE_OVERRIDE
+	bool "Built-in command line overrides boot loader arguments"
+	default n
+	depends on CMDLINE_BOOL
+	---help---
+	  Set this option to 'Y' to have the kernel ignore the boot loader
+	  command line, and use ONLY the built-in command line.
+
+	  This is used to work around broken boot loaders.  This should
+	  be set to 'N' under normal conditions.
+
+config VMALLOC_RESERVE
+	hex
+	default 0x1000000
+
+config HARDWALL
+	bool "Hardwall support to allow access to user dynamic network"
+	default y
+
+endmenu  # Tilera-specific configuration
+
+menu "Bus options"
+
+config NO_IOMEM
+	def_bool !PCI
+
+config NO_IOPORT
+	def_bool !PCI
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+# only elf supported
+config KCORE_ELF
+	def_bool y
+	depends on PROC_FS
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/tile/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug
new file mode 100644
index 00000000000..a81f0fbf7e6
--- /dev/null
+++ b/arch/tile/Kconfig.debug
@@ -0,0 +1,43 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+	default y
+	help
+	  Write kernel log output directly via the hypervisor console.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation
+	  it is not recommended because it looks ugly and doesn't cooperate
+	  with klogd/syslogd. You should normally N here,
+	  unless you want to debug such a crash.
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL
+	help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config DEBUG_EXTRA_FLAGS
+	string "Additional compiler arguments when building with '-g'"
+	depends on DEBUG_INFO
+	default ""
+	help
+	  Debug info can be large, and flags like
+	  `-femit-struct-debug-baseonly' can reduce the kernel file
+	  size and build time noticeably.  Such flags are often
+	  helpful if the main use of debug info is line number info.
+
+endmenu
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
new file mode 100644
index 00000000000..07c4318c062
--- /dev/null
+++ b/arch/tile/Makefile
@@ -0,0 +1,52 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+
+ifeq ($(CROSS_COMPILE),)
+# If building with TILERA_ROOT set (i.e. using the Tilera Multicore
+# Development Environment) we can set CROSS_COMPILE based on that.
+ifdef TILERA_ROOT
+CROSS_COMPILE	= $(TILERA_ROOT)/bin/tile-
+endif
+endif
+
+# If we're not cross-compiling, make sure we're on the right architecture.
+ifeq ($(CROSS_COMPILE),)
+HOST_ARCH = $(shell uname -m)
+ifneq ($(HOST_ARCH),$(ARCH))
+$(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH))
+endif
+endif
+
+
+KBUILD_CFLAGS   += $(CONFIG_DEBUG_EXTRA_FLAGS)
+
+LIBGCC_PATH     := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+# Provide the path to use for "make defconfig".
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
+# Used as a file extension when useful, e.g. head_$(BITS).o
+# Not needed for (e.g.) "$(CC) -m32" since the compiler automatically
+# uses the right default anyway.
+export BITS
+ifeq ($(CONFIG_TILEGX),y)
+BITS := 64
+else
+BITS := 32
+endif
+
+head-y		:= arch/tile/kernel/head_$(BITS).o
+
+libs-y		+= arch/tile/lib/
+libs-y		+= $(LIBGCC_PATH)
+
+
+# See arch/tile/Kbuild for content of core part of the kernel
+core-y		+= arch/tile/
diff --git a/arch/tile/configs/tile_defconfig b/arch/tile/configs/tile_defconfig
new file mode 100644
index 00000000000..f34c70b46c6
--- /dev/null
+++ b/arch/tile/configs/tile_defconfig
@@ -0,0 +1,1290 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34
+# Thu Jun  3 13:20:05 2010
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_DEFAULT_MIGRATION_COST=10000000
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_SMP=y
+CONFIG_WERROR=y
+# CONFIG_DEBUG_COPY_FROM_USER is not set
+CONFIG_HVC_TILE=y
+CONFIG_TILE=y
+# CONFIG_TILEGX is not set
+CONFIG_ARCH_DEFCONFIG="arch/tile/configs/tile_defconfig"
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="usr/contents.txt"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+
+#
+# Tilera-specific configuration
+#
+CONFIG_NR_CPUS=64
+CONFIG_HOMECACHE=y
+CONFIG_DATAPLANE=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+CONFIG_HIGHMEM=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=2
+CONFIG_FORCE_MAX_ZONEORDER=9
+# CONFIG_VMSPLIT_375G is not set
+# CONFIG_VMSPLIT_35G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_FEEDBACK_COLLECT is not set
+CONFIG_FEEDBACK_USE=""
+# CONFIG_HUGEVMAP is not set
+CONFIG_VMALLOC_RESERVE=0x1000000
+CONFIG_HARDWALL=y
+CONFIG_MEMPROF=y
+CONFIG_XGBE=y
+CONFIG_NET_TILE=y
+CONFIG_PSEUDO_NAPI=y
+CONFIG_TILEPCI_ENDP=y
+CONFIG_TILEPCI_HOST_SUBSET=m
+CONFIG_TILE_IDE_GPIO=y
+CONFIG_TILE_SOFTUART=y
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_NO_IOMEM is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HVC_DRIVER=y
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_EXTRA_FLAGS="-femit-struct-debug-baseonly"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/tile/include/arch/abi.h b/arch/tile/include/arch/abi.h
new file mode 100644
index 00000000000..da8df5b9d91
--- /dev/null
+++ b/arch/tile/include/arch/abi.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file
+ *
+ * ABI-related register definitions helpful when writing assembly code.
+ */
+
+#ifndef __ARCH_ABI_H__
+#define __ARCH_ABI_H__
+
+#include <arch/chip.h>
+
+/* Registers 0 - 55 are "normal", but some perform special roles. */
+
+#define TREG_FP       52   /**< Frame pointer. */
+#define TREG_TP       53   /**< Thread pointer. */
+#define TREG_SP       54   /**< Stack pointer. */
+#define TREG_LR       55   /**< Link to calling function PC. */
+
+/** Index of last normal general-purpose register. */
+#define TREG_LAST_GPR 55
+
+/* Registers 56 - 62 are "special" network registers. */
+
+#define TREG_SN       56   /**< Static network access. */
+#define TREG_IDN0     57   /**< IDN demux 0 access. */
+#define TREG_IDN1     58   /**< IDN demux 1 access. */
+#define TREG_UDN0     59   /**< UDN demux 0 access. */
+#define TREG_UDN1     60   /**< UDN demux 1 access. */
+#define TREG_UDN2     61   /**< UDN demux 2 access. */
+#define TREG_UDN3     62   /**< UDN demux 3 access. */
+
+/* Register 63 is the "special" zero register. */
+
+#define TREG_ZERO     63   /**< "Zero" register; always reads as "0". */
+
+
+/** By convention, this register is used to hold the syscall number. */
+#define TREG_SYSCALL_NR      10
+
+/** Name of register that holds the syscall number, for use in assembly. */
+#define TREG_SYSCALL_NR_NAME r10
+
+
+/**
+ * The ABI requires callers to allocate a caller state save area of
+ * this many bytes at the bottom of each stack frame.
+ */
+#ifdef __tile__
+#define C_ABI_SAVE_AREA_SIZE (2 * __SIZEOF_POINTER__)
+#endif
+
+/**
+ * The operand to an 'info' opcode directing the backtracer to not
+ * try to find the calling frame.
+ */
+#define INFO_OP_CANNOT_BACKTRACE 2
+
+#ifndef __ASSEMBLER__
+#if CHIP_WORD_SIZE() > 32
+
+/** Unsigned type that can hold a register. */
+typedef unsigned long long uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long long int_reg_t;
+
+/** String prefix to use for printf(). */
+#define INT_REG_FMT "ll"
+
+#elif !defined(__LP64__)   /* avoid confusion with LP64 cross-build tools */
+
+/** Unsigned type that can hold a register. */
+typedef unsigned long uint_reg_t;
+
+/** Signed type that can hold a register. */
+typedef long int_reg_t;
+
+/** String prefix to use for printf(). */
+#define INT_REG_FMT "l"
+
+#endif
+#endif /* __ASSEMBLER__ */
+
+#endif /* !__ARCH_ABI_H__ */
diff --git a/arch/tile/include/arch/chip.h b/arch/tile/include/arch/chip.h
new file mode 100644
index 00000000000..926d3db0e91
--- /dev/null
+++ b/arch/tile/include/arch/chip.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#if __tile_chip__ == 0
+#include <arch/chip_tile64.h>
+#elif __tile_chip__ == 1
+#include <arch/chip_tilepro.h>
+#elif defined(__tilegx__)
+#include <arch/chip_tilegx.h>
+#else
+#error Unexpected Tilera chip type
+#endif
diff --git a/arch/tile/include/arch/chip_tile64.h b/arch/tile/include/arch/chip_tile64.h
new file mode 100644
index 00000000000..1246573be59
--- /dev/null
+++ b/arch/tile/include/arch/chip_tile64.h
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ * @file
+ * Global header file.
+ * This header file specifies defines for TILE64.
+ */
+
+#ifndef __ARCH_CHIP_H__
+#define __ARCH_CHIP_H__
+
+/** Specify chip version.
+ * When possible, prefer the CHIP_xxx symbols below for future-proofing.
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip__ symbol.
+ */
+#define TILE_CHIP 0
+
+/** Specify chip revision.
+ * This provides for the case of a respin of a particular chip type;
+ * the normal value for this symbol is "0".
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip_rev__ symbol.
+ */
+#define TILE_CHIP_REV 0
+
+/** The name of this architecture. */
+#define CHIP_ARCH_NAME "tile64"
+
+/** The ELF e_machine type for binaries for this chip. */
+#define CHIP_ELF_TYPE() EM_TILE64
+
+/** The alternate ELF e_machine type for binaries for this chip. */
+#define CHIP_COMPAT_ELF_TYPE() 0x2506
+
+/** What is the native word size of the machine? */
+#define CHIP_WORD_SIZE() 32
+
+/** How many bits of a virtual address are used. Extra bits must be
+ * the sign extension of the low bits.
+ */
+#define CHIP_VA_WIDTH() 32
+
+/** How many bits are in a physical address? */
+#define CHIP_PA_WIDTH() 36
+
+/** Size of the L2 cache, in bytes. */
+#define CHIP_L2_CACHE_SIZE() 65536
+
+/** Log size of an L2 cache line in bytes. */
+#define CHIP_L2_LOG_LINE_SIZE() 6
+
+/** Size of an L2 cache line, in bytes. */
+#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE())
+
+/** Associativity of the L2 cache. */
+#define CHIP_L2_ASSOC() 2
+
+/** Size of the L1 data cache, in bytes. */
+#define CHIP_L1D_CACHE_SIZE() 8192
+
+/** Log size of an L1 data cache line in bytes. */
+#define CHIP_L1D_LOG_LINE_SIZE() 4
+
+/** Size of an L1 data cache line, in bytes. */
+#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE())
+
+/** Associativity of the L1 data cache. */
+#define CHIP_L1D_ASSOC() 2
+
+/** Size of the L1 instruction cache, in bytes. */
+#define CHIP_L1I_CACHE_SIZE() 8192
+
+/** Log size of an L1 instruction cache line in bytes. */
+#define CHIP_L1I_LOG_LINE_SIZE() 6
+
+/** Size of an L1 instruction cache line, in bytes. */
+#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE())
+
+/** Associativity of the L1 instruction cache. */
+#define CHIP_L1I_ASSOC() 1
+
+/** Stride with which flush instructions must be issued. */
+#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which inv instructions must be issued. */
+#define CHIP_INV_STRIDE() CHIP_L1D_LINE_SIZE()
+
+/** Stride with which finv instructions must be issued. */
+#define CHIP_FINV_STRIDE() CHIP_L1D_LINE_SIZE()
+
+/** Can the local cache coherently cache data that is homed elsewhere? */
+#define CHIP_HAS_COHERENT_LOCAL_CACHE() 0
+
+/** How many simultaneous outstanding victims can the L2 cache have? */
+#define CHIP_MAX_OUTSTANDING_VICTIMS() 2
+
+/** Does the TLB support the NC and NOALLOC bits? */
+#define CHIP_HAS_NC_AND_NOALLOC_BITS() 0
+
+/** Does the chip support hash-for-home caching? */
+#define CHIP_HAS_CBOX_HOME_MAP() 0
+
+/** Number of entries in the chip's home map tables. */
+/* #define CHIP_CBOX_HOME_MAP_SIZE() -- does not apply to chip 0 */
+
+/** Do uncacheable requests miss in the cache regardless of whether
+ * there is matching data? */
+#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 0
+
+/** Does the mf instruction wait for victims? */
+#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 1
+
+/** Does the chip have an "inv" instruction that doesn't also flush? */
+#define CHIP_HAS_INV() 0
+
+/** Does the chip have a "wh64" instruction? */
+#define CHIP_HAS_WH64() 0
+
+/** Does this chip have a 'dword_align' instruction? */
+#define CHIP_HAS_DWORD_ALIGN() 0
+
+/** Number of performance counters. */
+#define CHIP_PERFORMANCE_COUNTERS() 2
+
+/** Does this chip have auxiliary performance counters? */
+#define CHIP_HAS_AUX_PERF_COUNTERS() 0
+
+/** Is the CBOX_MSR1 SPR supported? */
+#define CHIP_HAS_CBOX_MSR1() 0
+
+/** Is the TILE_RTF_HWM SPR supported? */
+#define CHIP_HAS_TILE_RTF_HWM() 0
+
+/** Is the TILE_WRITE_PENDING SPR supported? */
+#define CHIP_HAS_TILE_WRITE_PENDING() 0
+
+/** Is the PROC_STATUS SPR supported? */
+#define CHIP_HAS_PROC_STATUS_SPR() 0
+
+/** Log of the number of mshims we have. */
+#define CHIP_LOG_NUM_MSHIMS() 2
+
+/** Are the bases of the interrupt vector areas fixed? */
+#define CHIP_HAS_FIXED_INTVEC_BASE() 1
+
+/** Are the interrupt masks split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_INTR_MASK() 1
+
+/** Is the cycle count split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_CYCLE() 1
+
+/** Does the chip have a static network? */
+#define CHIP_HAS_SN() 1
+
+/** Does the chip have a static network processor? */
+#define CHIP_HAS_SN_PROC() 1
+
+/** Size of the L1 static network processor instruction cache, in bytes. */
+#define CHIP_L1SNI_CACHE_SIZE() 2048
+
+/** Does the chip have DMA support in each tile? */
+#define CHIP_HAS_TILE_DMA() 1
+
+/** Does the chip have the second revision of the directly accessible
+ *  dynamic networks?  This encapsulates a number of characteristics,
+ *  including the absence of the catch-all, the absence of inline message
+ *  tags, the absence of support for network context-switching, and so on.
+ */
+#define CHIP_HAS_REV1_XDN() 0
+
+/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */
+#define CHIP_HAS_CMPEXCH() 0
+
+/** Does the chip have memory-mapped I/O support? */
+#define CHIP_HAS_MMIO() 0
+
+/** Does the chip have post-completion interrupts? */
+#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0
+
+/** Does the chip have native single step support? */
+#define CHIP_HAS_SINGLE_STEP() 0
+
+#ifndef __OPEN_SOURCE__  /* features only relevant to hypervisor-level code */
+
+/** How many entries are present in the instruction TLB? */
+#define CHIP_ITLB_ENTRIES() 8
+
+/** How many entries are present in the data TLB? */
+#define CHIP_DTLB_ENTRIES() 16
+
+/** How many MAF entries does the XAUI shim have? */
+#define CHIP_XAUI_MAF_ENTRIES() 16
+
+/** Does the memory shim have a source-id table? */
+#define CHIP_HAS_MSHIM_SRCID_TABLE() 1
+
+/** Does the L1 instruction cache clear on reset? */
+#define CHIP_HAS_L1I_CLEAR_ON_RESET() 0
+
+/** Does the chip come out of reset with valid coordinates on all tiles?
+ * Note that if defined, this also implies that the upper left is 1,1.
+ */
+#define CHIP_HAS_VALID_TILE_COORD_RESET() 0
+
+/** Does the chip have unified packet formats? */
+#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 0
+
+/** Does the chip support write reordering? */
+#define CHIP_HAS_WRITE_REORDERING() 0
+
+/** Does the chip support Y-X routing as well as X-Y? */
+#define CHIP_HAS_Y_X_ROUTING() 0
+
+/** Is INTCTRL_3 managed with the correct MPL? */
+#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 0
+
+/** Is it possible to configure the chip to be big-endian? */
+#define CHIP_HAS_BIG_ENDIAN_CONFIG() 0
+
+/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */
+#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 0
+
+/** Is the DIAG_TRACE_WAY SPR supported? */
+#define CHIP_HAS_DIAG_TRACE_WAY() 0
+
+/** Is the MEM_STRIPE_CONFIG SPR supported? */
+#define CHIP_HAS_MEM_STRIPE_CONFIG() 0
+
+/** Are the TLB_PERF SPRs supported? */
+#define CHIP_HAS_TLB_PERF() 0
+
+/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */
+#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 0
+
+/** Does the chip support rev1 DMA packets? */
+#define CHIP_HAS_REV1_DMA_PACKETS() 0
+
+/** Does the chip have an IPI shim? */
+#define CHIP_HAS_IPI() 0
+
+#endif /* !__OPEN_SOURCE__ */
+#endif /* __ARCH_CHIP_H__ */
diff --git a/arch/tile/include/arch/chip_tilepro.h b/arch/tile/include/arch/chip_tilepro.h
new file mode 100644
index 00000000000..e864c47fc89
--- /dev/null
+++ b/arch/tile/include/arch/chip_tilepro.h
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/*
+ * @file
+ * Global header file.
+ * This header file specifies defines for TILEPro.
+ */
+
+#ifndef __ARCH_CHIP_H__
+#define __ARCH_CHIP_H__
+
+/** Specify chip version.
+ * When possible, prefer the CHIP_xxx symbols below for future-proofing.
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip__ symbol.
+ */
+#define TILE_CHIP 1
+
+/** Specify chip revision.
+ * This provides for the case of a respin of a particular chip type;
+ * the normal value for this symbol is "0".
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip_rev__ symbol.
+ */
+#define TILE_CHIP_REV 0
+
+/** The name of this architecture. */
+#define CHIP_ARCH_NAME "tilepro"
+
+/** The ELF e_machine type for binaries for this chip. */
+#define CHIP_ELF_TYPE() EM_TILEPRO
+
+/** The alternate ELF e_machine type for binaries for this chip. */
+#define CHIP_COMPAT_ELF_TYPE() 0x2507
+
+/** What is the native word size of the machine? */
+#define CHIP_WORD_SIZE() 32
+
+/** How many bits of a virtual address are used. Extra bits must be
+ * the sign extension of the low bits.
+ */
+#define CHIP_VA_WIDTH() 32
+
+/** How many bits are in a physical address? */
+#define CHIP_PA_WIDTH() 36
+
+/** Size of the L2 cache, in bytes. */
+#define CHIP_L2_CACHE_SIZE() 65536
+
+/** Log size of an L2 cache line in bytes. */
+#define CHIP_L2_LOG_LINE_SIZE() 6
+
+/** Size of an L2 cache line, in bytes. */
+#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE())
+
+/** Associativity of the L2 cache. */
+#define CHIP_L2_ASSOC() 4
+
+/** Size of the L1 data cache, in bytes. */
+#define CHIP_L1D_CACHE_SIZE() 8192
+
+/** Log size of an L1 data cache line in bytes. */
+#define CHIP_L1D_LOG_LINE_SIZE() 4
+
+/** Size of an L1 data cache line, in bytes. */
+#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE())
+
+/** Associativity of the L1 data cache. */
+#define CHIP_L1D_ASSOC() 2
+
+/** Size of the L1 instruction cache, in bytes. */
+#define CHIP_L1I_CACHE_SIZE() 16384
+
+/** Log size of an L1 instruction cache line in bytes. */
+#define CHIP_L1I_LOG_LINE_SIZE() 6
+
+/** Size of an L1 instruction cache line, in bytes. */
+#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE())
+
+/** Associativity of the L1 instruction cache. */
+#define CHIP_L1I_ASSOC() 1
+
+/** Stride with which flush instructions must be issued. */
+#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which inv instructions must be issued. */
+#define CHIP_INV_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which finv instructions must be issued. */
+#define CHIP_FINV_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Can the local cache coherently cache data that is homed elsewhere? */
+#define CHIP_HAS_COHERENT_LOCAL_CACHE() 1
+
+/** How many simultaneous outstanding victims can the L2 cache have? */
+#define CHIP_MAX_OUTSTANDING_VICTIMS() 4
+
+/** Does the TLB support the NC and NOALLOC bits? */
+#define CHIP_HAS_NC_AND_NOALLOC_BITS() 1
+
+/** Does the chip support hash-for-home caching? */
+#define CHIP_HAS_CBOX_HOME_MAP() 1
+
+/** Number of entries in the chip's home map tables. */
+#define CHIP_CBOX_HOME_MAP_SIZE() 64
+
+/** Do uncacheable requests miss in the cache regardless of whether
+ * there is matching data? */
+#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 1
+
+/** Does the mf instruction wait for victims? */
+#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 0
+
+/** Does the chip have an "inv" instruction that doesn't also flush? */
+#define CHIP_HAS_INV() 1
+
+/** Does the chip have a "wh64" instruction? */
+#define CHIP_HAS_WH64() 1
+
+/** Does this chip have a 'dword_align' instruction? */
+#define CHIP_HAS_DWORD_ALIGN() 1
+
+/** Number of performance counters. */
+#define CHIP_PERFORMANCE_COUNTERS() 4
+
+/** Does this chip have auxiliary performance counters? */
+#define CHIP_HAS_AUX_PERF_COUNTERS() 1
+
+/** Is the CBOX_MSR1 SPR supported? */
+#define CHIP_HAS_CBOX_MSR1() 1
+
+/** Is the TILE_RTF_HWM SPR supported? */
+#define CHIP_HAS_TILE_RTF_HWM() 1
+
+/** Is the TILE_WRITE_PENDING SPR supported? */
+#define CHIP_HAS_TILE_WRITE_PENDING() 1
+
+/** Is the PROC_STATUS SPR supported? */
+#define CHIP_HAS_PROC_STATUS_SPR() 1
+
+/** Log of the number of mshims we have. */
+#define CHIP_LOG_NUM_MSHIMS() 2
+
+/** Are the bases of the interrupt vector areas fixed? */
+#define CHIP_HAS_FIXED_INTVEC_BASE() 1
+
+/** Are the interrupt masks split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_INTR_MASK() 1
+
+/** Is the cycle count split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_CYCLE() 1
+
+/** Does the chip have a static network? */
+#define CHIP_HAS_SN() 1
+
+/** Does the chip have a static network processor? */
+#define CHIP_HAS_SN_PROC() 0
+
+/** Size of the L1 static network processor instruction cache, in bytes. */
+/* #define CHIP_L1SNI_CACHE_SIZE() -- does not apply to chip 1 */
+
+/** Does the chip have DMA support in each tile? */
+#define CHIP_HAS_TILE_DMA() 1
+
+/** Does the chip have the second revision of the directly accessible
+ *  dynamic networks?  This encapsulates a number of characteristics,
+ *  including the absence of the catch-all, the absence of inline message
+ *  tags, the absence of support for network context-switching, and so on.
+ */
+#define CHIP_HAS_REV1_XDN() 0
+
+/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */
+#define CHIP_HAS_CMPEXCH() 0
+
+/** Does the chip have memory-mapped I/O support? */
+#define CHIP_HAS_MMIO() 0
+
+/** Does the chip have post-completion interrupts? */
+#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0
+
+/** Does the chip have native single step support? */
+#define CHIP_HAS_SINGLE_STEP() 0
+
+#ifndef __OPEN_SOURCE__  /* features only relevant to hypervisor-level code */
+
+/** How many entries are present in the instruction TLB? */
+#define CHIP_ITLB_ENTRIES() 16
+
+/** How many entries are present in the data TLB? */
+#define CHIP_DTLB_ENTRIES() 16
+
+/** How many MAF entries does the XAUI shim have? */
+#define CHIP_XAUI_MAF_ENTRIES() 32
+
+/** Does the memory shim have a source-id table? */
+#define CHIP_HAS_MSHIM_SRCID_TABLE() 0
+
+/** Does the L1 instruction cache clear on reset? */
+#define CHIP_HAS_L1I_CLEAR_ON_RESET() 1
+
+/** Does the chip come out of reset with valid coordinates on all tiles?
+ * Note that if defined, this also implies that the upper left is 1,1.
+ */
+#define CHIP_HAS_VALID_TILE_COORD_RESET() 1
+
+/** Does the chip have unified packet formats? */
+#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 1
+
+/** Does the chip support write reordering? */
+#define CHIP_HAS_WRITE_REORDERING() 1
+
+/** Does the chip support Y-X routing as well as X-Y? */
+#define CHIP_HAS_Y_X_ROUTING() 1
+
+/** Is INTCTRL_3 managed with the correct MPL? */
+#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 1
+
+/** Is it possible to configure the chip to be big-endian? */
+#define CHIP_HAS_BIG_ENDIAN_CONFIG() 1
+
+/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */
+#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 1
+
+/** Is the DIAG_TRACE_WAY SPR supported? */
+#define CHIP_HAS_DIAG_TRACE_WAY() 1
+
+/** Is the MEM_STRIPE_CONFIG SPR supported? */
+#define CHIP_HAS_MEM_STRIPE_CONFIG() 1
+
+/** Are the TLB_PERF SPRs supported? */
+#define CHIP_HAS_TLB_PERF() 1
+
+/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */
+#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 1
+
+/** Does the chip support rev1 DMA packets? */
+#define CHIP_HAS_REV1_DMA_PACKETS() 1
+
+/** Does the chip have an IPI shim? */
+#define CHIP_HAS_IPI() 0
+
+#endif /* !__OPEN_SOURCE__ */
+#endif /* __ARCH_CHIP_H__ */
diff --git a/arch/tile/include/arch/icache.h b/arch/tile/include/arch/icache.h
new file mode 100644
index 00000000000..5c87c901633
--- /dev/null
+++ b/arch/tile/include/arch/icache.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ */
+
+/**
+ * @file
+ *
+ * Support for invalidating bytes in the instruction
+ */
+
+#ifndef __ARCH_ICACHE_H__
+#define __ARCH_ICACHE_H__
+
+#include <arch/chip.h>
+
+
+/**
+ * Invalidate the instruction cache for the given range of memory.
+ *
+ * @param addr The start of memory to be invalidated.
+ * @param size The number of bytes to be invalidated.
+ * @param page_size The system's page size, typically the PAGE_SIZE constant
+ * in sys/page.h.  This value must be a power of two no larger
+ * than the page containing the code to be invalidated. If the value
+ * is smaller than the actual page size, this function will still
+ * work, but may run slower than necessary.
+ */
+static __inline void
+invalidate_icache(const void* addr, unsigned long size,
+                  unsigned long page_size)
+{
+  const unsigned long cache_way_size =
+    CHIP_L1I_CACHE_SIZE() / CHIP_L1I_ASSOC();
+  unsigned long max_useful_size;
+  const char* start, *end;
+  long num_passes;
+
+  if (__builtin_expect(size == 0, 0))
+    return;
+
+#ifdef __tilegx__
+  /* Limit the number of bytes visited to avoid redundant iterations. */
+  max_useful_size = (page_size < cache_way_size) ? page_size : cache_way_size;
+
+  /* No PA aliasing is possible, so one pass always suffices. */
+  num_passes = 1;
+#else
+  /* Limit the number of bytes visited to avoid redundant iterations. */
+  max_useful_size = cache_way_size;
+
+  /*
+   * Compute how many passes we need (we'll treat 0 as if it were 1).
+   * This works because we know the page size is a power of two.
+   */
+  num_passes = cache_way_size >> __builtin_ctzl(page_size);
+#endif
+
+  if (__builtin_expect(size > max_useful_size, 0))
+    size = max_useful_size;
+
+  /* Locate the first and last bytes to be invalidated. */
+  start = (const char *)((unsigned long)addr & -CHIP_L1I_LINE_SIZE());
+  end = (const char*)addr + size - 1;
+
+  __insn_mf();
+
+  do
+  {
+    const char* p;
+
+    for (p = start; p <= end; p += CHIP_L1I_LINE_SIZE())
+      __insn_icoh(p);
+
+    start += page_size;
+    end += page_size;
+  }
+  while (--num_passes > 0);
+
+  __insn_drain();
+}
+
+
+#endif /* __ARCH_ICACHE_H__ */
diff --git a/arch/tile/include/arch/interrupts.h b/arch/tile/include/arch/interrupts.h
new file mode 100644
index 00000000000..20f8f07d2de
--- /dev/null
+++ b/arch/tile/include/arch/interrupts.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifdef __tilegx__
+#include <arch/interrupts_64.h>
+#else
+#include <arch/interrupts_32.h>
+#endif
diff --git a/arch/tile/include/arch/interrupts_32.h b/arch/tile/include/arch/interrupts_32.h
new file mode 100644
index 00000000000..9d0bfa7e59b
--- /dev/null
+++ b/arch/tile/include/arch/interrupts_32.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef __ARCH_INTERRUPTS_H__
+#define __ARCH_INTERRUPTS_H__
+
+/** Mask for an interrupt. */
+#ifdef __ASSEMBLER__
+/* Note: must handle breaking interrupts into high and low words manually. */
+#define INT_MASK(intno) (1 << (intno))
+#else
+#define INT_MASK(intno) (1ULL << (intno))
+#endif
+
+
+/** Where a given interrupt executes */
+#define INTERRUPT_VECTOR(i, pl) (0xFC000000 + ((pl) << 24) + ((i) << 8))
+
+/** Where to store a vector for a given interrupt. */
+#define USER_INTERRUPT_VECTOR(i) INTERRUPT_VECTOR(i, 0)
+
+/** The base address of user-level interrupts. */
+#define USER_INTERRUPT_VECTOR_BASE INTERRUPT_VECTOR(0, 0)
+
+
+/** Additional synthetic interrupt. */
+#define INT_BREAKPOINT (63)
+
+#define INT_ITLB_MISS    0
+#define INT_MEM_ERROR    1
+#define INT_ILL    2
+#define INT_GPV    3
+#define INT_SN_ACCESS    4
+#define INT_IDN_ACCESS    5
+#define INT_UDN_ACCESS    6
+#define INT_IDN_REFILL    7
+#define INT_UDN_REFILL    8
+#define INT_IDN_COMPLETE    9
+#define INT_UDN_COMPLETE   10
+#define INT_SWINT_3   11
+#define INT_SWINT_2   12
+#define INT_SWINT_1   13
+#define INT_SWINT_0   14
+#define INT_UNALIGN_DATA   15
+#define INT_DTLB_MISS   16
+#define INT_DTLB_ACCESS   17
+#define INT_DMATLB_MISS   18
+#define INT_DMATLB_ACCESS   19
+#define INT_SNITLB_MISS   20
+#define INT_SN_NOTIFY   21
+#define INT_SN_FIREWALL   22
+#define INT_IDN_FIREWALL   23
+#define INT_UDN_FIREWALL   24
+#define INT_TILE_TIMER   25
+#define INT_IDN_TIMER   26
+#define INT_UDN_TIMER   27
+#define INT_DMA_NOTIFY   28
+#define INT_IDN_CA   29
+#define INT_UDN_CA   30
+#define INT_IDN_AVAIL   31
+#define INT_UDN_AVAIL   32
+#define INT_PERF_COUNT   33
+#define INT_INTCTRL_3   34
+#define INT_INTCTRL_2   35
+#define INT_INTCTRL_1   36
+#define INT_INTCTRL_0   37
+#define INT_BOOT_ACCESS   38
+#define INT_WORLD_ACCESS   39
+#define INT_I_ASID   40
+#define INT_D_ASID   41
+#define INT_DMA_ASID   42
+#define INT_SNI_ASID   43
+#define INT_DMA_CPL   44
+#define INT_SN_CPL   45
+#define INT_DOUBLE_FAULT   46
+#define INT_SN_STATIC_ACCESS   47
+#define INT_AUX_PERF_COUNT   48
+
+#define NUM_INTERRUPTS 49
+
+#define QUEUED_INTERRUPTS ( \
+    INT_MASK(INT_MEM_ERROR) | \
+    INT_MASK(INT_DMATLB_MISS) | \
+    INT_MASK(INT_DMATLB_ACCESS) | \
+    INT_MASK(INT_SNITLB_MISS) | \
+    INT_MASK(INT_SN_NOTIFY) | \
+    INT_MASK(INT_SN_FIREWALL) | \
+    INT_MASK(INT_IDN_FIREWALL) | \
+    INT_MASK(INT_UDN_FIREWALL) | \
+    INT_MASK(INT_TILE_TIMER) | \
+    INT_MASK(INT_IDN_TIMER) | \
+    INT_MASK(INT_UDN_TIMER) | \
+    INT_MASK(INT_DMA_NOTIFY) | \
+    INT_MASK(INT_IDN_CA) | \
+    INT_MASK(INT_UDN_CA) | \
+    INT_MASK(INT_IDN_AVAIL) | \
+    INT_MASK(INT_UDN_AVAIL) | \
+    INT_MASK(INT_PERF_COUNT) | \
+    INT_MASK(INT_INTCTRL_3) | \
+    INT_MASK(INT_INTCTRL_2) | \
+    INT_MASK(INT_INTCTRL_1) | \
+    INT_MASK(INT_INTCTRL_0) | \
+    INT_MASK(INT_BOOT_ACCESS) | \
+    INT_MASK(INT_WORLD_ACCESS) | \
+    INT_MASK(INT_I_ASID) | \
+    INT_MASK(INT_D_ASID) | \
+    INT_MASK(INT_DMA_ASID) | \
+    INT_MASK(INT_SNI_ASID) | \
+    INT_MASK(INT_DMA_CPL) | \
+    INT_MASK(INT_SN_CPL) | \
+    INT_MASK(INT_DOUBLE_FAULT) | \
+    INT_MASK(INT_AUX_PERF_COUNT) | \
+    0)
+#define NONQUEUED_INTERRUPTS ( \
+    INT_MASK(INT_ITLB_MISS) | \
+    INT_MASK(INT_ILL) | \
+    INT_MASK(INT_GPV) | \
+    INT_MASK(INT_SN_ACCESS) | \
+    INT_MASK(INT_IDN_ACCESS) | \
+    INT_MASK(INT_UDN_ACCESS) | \
+    INT_MASK(INT_IDN_REFILL) | \
+    INT_MASK(INT_UDN_REFILL) | \
+    INT_MASK(INT_IDN_COMPLETE) | \
+    INT_MASK(INT_UDN_COMPLETE) | \
+    INT_MASK(INT_SWINT_3) | \
+    INT_MASK(INT_SWINT_2) | \
+    INT_MASK(INT_SWINT_1) | \
+    INT_MASK(INT_SWINT_0) | \
+    INT_MASK(INT_UNALIGN_DATA) | \
+    INT_MASK(INT_DTLB_MISS) | \
+    INT_MASK(INT_DTLB_ACCESS) | \
+    INT_MASK(INT_SN_STATIC_ACCESS) | \
+    0)
+#define CRITICAL_MASKED_INTERRUPTS ( \
+    INT_MASK(INT_MEM_ERROR) | \
+    INT_MASK(INT_DMATLB_MISS) | \
+    INT_MASK(INT_DMATLB_ACCESS) | \
+    INT_MASK(INT_SNITLB_MISS) | \
+    INT_MASK(INT_SN_NOTIFY) | \
+    INT_MASK(INT_SN_FIREWALL) | \
+    INT_MASK(INT_IDN_FIREWALL) | \
+    INT_MASK(INT_UDN_FIREWALL) | \
+    INT_MASK(INT_TILE_TIMER) | \
+    INT_MASK(INT_IDN_TIMER) | \
+    INT_MASK(INT_UDN_TIMER) | \
+    INT_MASK(INT_DMA_NOTIFY) | \
+    INT_MASK(INT_IDN_CA) | \
+    INT_MASK(INT_UDN_CA) | \
+    INT_MASK(INT_IDN_AVAIL) | \
+    INT_MASK(INT_UDN_AVAIL) | \
+    INT_MASK(INT_PERF_COUNT) | \
+    INT_MASK(INT_INTCTRL_3) | \
+    INT_MASK(INT_INTCTRL_2) | \
+    INT_MASK(INT_INTCTRL_1) | \
+    INT_MASK(INT_INTCTRL_0) | \
+    INT_MASK(INT_AUX_PERF_COUNT) | \
+    0)
+#define CRITICAL_UNMASKED_INTERRUPTS ( \
+    INT_MASK(INT_ITLB_MISS) | \
+    INT_MASK(INT_ILL) | \
+    INT_MASK(INT_GPV) | \
+    INT_MASK(INT_SN_ACCESS) | \
+    INT_MASK(INT_IDN_ACCESS) | \
+    INT_MASK(INT_UDN_ACCESS) | \
+    INT_MASK(INT_IDN_REFILL) | \
+    INT_MASK(INT_UDN_REFILL) | \
+    INT_MASK(INT_IDN_COMPLETE) | \
+    INT_MASK(INT_UDN_COMPLETE) | \
+    INT_MASK(INT_SWINT_3) | \
+    INT_MASK(INT_SWINT_2) | \
+    INT_MASK(INT_SWINT_1) | \
+    INT_MASK(INT_SWINT_0) | \
+    INT_MASK(INT_UNALIGN_DATA) | \
+    INT_MASK(INT_DTLB_MISS) | \
+    INT_MASK(INT_DTLB_ACCESS) | \
+    INT_MASK(INT_BOOT_ACCESS) | \
+    INT_MASK(INT_WORLD_ACCESS) | \
+    INT_MASK(INT_I_ASID) | \
+    INT_MASK(INT_D_ASID) | \
+    INT_MASK(INT_DMA_ASID) | \
+    INT_MASK(INT_SNI_ASID) | \
+    INT_MASK(INT_DMA_CPL) | \
+    INT_MASK(INT_SN_CPL) | \
+    INT_MASK(INT_DOUBLE_FAULT) | \
+    INT_MASK(INT_SN_STATIC_ACCESS) | \
+    0)
+#define MASKABLE_INTERRUPTS ( \
+    INT_MASK(INT_MEM_ERROR) | \
+    INT_MASK(INT_IDN_REFILL) | \
+    INT_MASK(INT_UDN_REFILL) | \
+    INT_MASK(INT_IDN_COMPLETE) | \
+    INT_MASK(INT_UDN_COMPLETE) | \
+    INT_MASK(INT_DMATLB_MISS) | \
+    INT_MASK(INT_DMATLB_ACCESS) | \
+    INT_MASK(INT_SNITLB_MISS) | \
+    INT_MASK(INT_SN_NOTIFY) | \
+    INT_MASK(INT_SN_FIREWALL) | \
+    INT_MASK(INT_IDN_FIREWALL) | \
+    INT_MASK(INT_UDN_FIREWALL) | \
+    INT_MASK(INT_TILE_TIMER) | \
+    INT_MASK(INT_IDN_TIMER) | \
+    INT_MASK(INT_UDN_TIMER) | \
+    INT_MASK(INT_DMA_NOTIFY) | \
+    INT_MASK(INT_IDN_CA) | \
+    INT_MASK(INT_UDN_CA) | \
+    INT_MASK(INT_IDN_AVAIL) | \
+    INT_MASK(INT_UDN_AVAIL) | \
+    INT_MASK(INT_PERF_COUNT) | \
+    INT_MASK(INT_INTCTRL_3) | \
+    INT_MASK(INT_INTCTRL_2) | \
+    INT_MASK(INT_INTCTRL_1) | \
+    INT_MASK(INT_INTCTRL_0) | \
+    INT_MASK(INT_AUX_PERF_COUNT) | \
+    0)
+#define UNMASKABLE_INTERRUPTS ( \
+    INT_MASK(INT_ITLB_MISS) | \
+    INT_MASK(INT_ILL) | \
+    INT_MASK(INT_GPV) | \
+    INT_MASK(INT_SN_ACCESS) | \
+    INT_MASK(INT_IDN_ACCESS) | \
+    INT_MASK(INT_UDN_ACCESS) | \
+    INT_MASK(INT_SWINT_3) | \
+    INT_MASK(INT_SWINT_2) | \
+    INT_MASK(INT_SWINT_1) | \
+    INT_MASK(INT_SWINT_0) | \
+    INT_MASK(INT_UNALIGN_DATA) | \
+    INT_MASK(INT_DTLB_MISS) | \
+    INT_MASK(INT_DTLB_ACCESS) | \
+    INT_MASK(INT_BOOT_ACCESS) | \
+    INT_MASK(INT_WORLD_ACCESS) | \
+    INT_MASK(INT_I_ASID) | \
+    INT_MASK(INT_D_ASID) | \
+    INT_MASK(INT_DMA_ASID) | \
+    INT_MASK(INT_SNI_ASID) | \
+    INT_MASK(INT_DMA_CPL) | \
+    INT_MASK(INT_SN_CPL) | \
+    INT_MASK(INT_DOUBLE_FAULT) | \
+    INT_MASK(INT_SN_STATIC_ACCESS) | \
+    0)
+#define SYNC_INTERRUPTS ( \
+    INT_MASK(INT_ITLB_MISS) | \
+    INT_MASK(INT_ILL) | \
+    INT_MASK(INT_GPV) | \
+    INT_MASK(INT_SN_ACCESS) | \
+    INT_MASK(INT_IDN_ACCESS) | \
+    INT_MASK(INT_UDN_ACCESS) | \
+    INT_MASK(INT_IDN_REFILL) | \
+    INT_MASK(INT_UDN_REFILL) | \
+    INT_MASK(INT_IDN_COMPLETE) | \
+    INT_MASK(INT_UDN_COMPLETE) | \
+    INT_MASK(INT_SWINT_3) | \
+    INT_MASK(INT_SWINT_2) | \
+    INT_MASK(INT_SWINT_1) | \
+    INT_MASK(INT_SWINT_0) | \
+    INT_MASK(INT_UNALIGN_DATA) | \
+    INT_MASK(INT_DTLB_MISS) | \
+    INT_MASK(INT_DTLB_ACCESS) | \
+    INT_MASK(INT_SN_STATIC_ACCESS) | \
+    0)
+#define NON_SYNC_INTERRUPTS ( \
+    INT_MASK(INT_MEM_ERROR) | \
+    INT_MASK(INT_DMATLB_MISS) | \
+    INT_MASK(INT_DMATLB_ACCESS) | \
+    INT_MASK(INT_SNITLB_MISS) | \
+    INT_MASK(INT_SN_NOTIFY) | \
+    INT_MASK(INT_SN_FIREWALL) | \
+    INT_MASK(INT_IDN_FIREWALL) | \
+    INT_MASK(INT_UDN_FIREWALL) | \
+    INT_MASK(INT_TILE_TIMER) | \
+    INT_MASK(INT_IDN_TIMER) | \
+    INT_MASK(INT_UDN_TIMER) | \
+    INT_MASK(INT_DMA_NOTIFY) | \
+    INT_MASK(INT_IDN_CA) | \
+    INT_MASK(INT_UDN_CA) | \
+    INT_MASK(INT_IDN_AVAIL) | \
+    INT_MASK(INT_UDN_AVAIL) | \
+    INT_MASK(INT_PERF_COUNT) | \
+    INT_MASK(INT_INTCTRL_3) | \
+    INT_MASK(INT_INTCTRL_2) | \
+    INT_MASK(INT_INTCTRL_1) | \
+    INT_MASK(INT_INTCTRL_0) | \
+    INT_MASK(INT_BOOT_ACCESS) | \
+    INT_MASK(INT_WORLD_ACCESS) | \
+    INT_MASK(INT_I_ASID) | \
+    INT_MASK(INT_D_ASID) | \
+    INT_MASK(INT_DMA_ASID) | \
+    INT_MASK(INT_SNI_ASID) | \
+    INT_MASK(INT_DMA_CPL) | \
+    INT_MASK(INT_SN_CPL) | \
+    INT_MASK(INT_DOUBLE_FAULT) | \
+    INT_MASK(INT_AUX_PERF_COUNT) | \
+    0)
+#endif /* !__ARCH_INTERRUPTS_H__ */
diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h
new file mode 100644
index 00000000000..6418fbde063
--- /dev/null
+++ b/arch/tile/include/arch/sim_def.h
@@ -0,0 +1,512 @@
+// Copyright 2010 Tilera Corporation. All Rights Reserved.
+//
+//   This program is free software; you can redistribute it and/or
+//   modify it under the terms of the GNU General Public License
+//   as published by the Free Software Foundation, version 2.
+//
+//   This program is distributed in the hope that it will be useful, but
+//   WITHOUT ANY WARRANTY; without even the implied warranty of
+//   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+//   NON INFRINGEMENT.  See the GNU General Public License for
+//   more details.
+
+//! @file
+//!
+//! Some low-level simulator definitions.
+//!
+
+#ifndef __ARCH_SIM_DEF_H__
+#define __ARCH_SIM_DEF_H__
+
+
+//! Internal: the low bits of the SIM_CONTROL_* SPR values specify
+//! the operation to perform, and the remaining bits are
+//! an operation-specific parameter (often unused).
+//!
+#define _SIM_CONTROL_OPERATOR_BITS 8
+
+
+//== Values which can be written to SPR_SIM_CONTROL.
+
+//! If written to SPR_SIM_CONTROL, stops profiling.
+//!
+#define SIM_CONTROL_PROFILER_DISABLE 0
+
+//! If written to SPR_SIM_CONTROL, starts profiling.
+//!
+#define SIM_CONTROL_PROFILER_ENABLE 1
+
+//! If written to SPR_SIM_CONTROL, clears profiling counters.
+//!
+#define SIM_CONTROL_PROFILER_CLEAR 2
+
+//! If written to SPR_SIM_CONTROL, checkpoints the simulator.
+//!
+#define SIM_CONTROL_CHECKPOINT 3
+
+//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+//! sets the tracing mask to the given mask. See "sim_set_tracing()".
+//!
+#define SIM_CONTROL_SET_TRACING 4
+
+//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+//! dumps the requested items of machine state to the log.
+//!
+#define SIM_CONTROL_DUMP 5
+
+//! If written to SPR_SIM_CONTROL, clears chip-level profiling counters.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6
+
+//! If written to SPR_SIM_CONTROL, disables chip-level profiling.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7
+
+//! If written to SPR_SIM_CONTROL, enables chip-level profiling.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8
+
+//! If written to SPR_SIM_CONTROL, enables chip-level functional mode
+//!
+#define SIM_CONTROL_ENABLE_FUNCTIONAL 9
+
+//! If written to SPR_SIM_CONTROL, disables chip-level functional mode.
+//!
+#define SIM_CONTROL_DISABLE_FUNCTIONAL 10
+
+//! If written to SPR_SIM_CONTROL, enables chip-level functional mode.
+//! All tiles must perform this write for functional mode to be enabled.
+//! Ignored in naked boot mode unless --functional is specified.
+//! WARNING: Only the hypervisor startup code should use this!
+//!
+#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! writes a string directly to the simulator output.  Written to once for
+//! each character in the string, plus a final NUL.  Instead of NUL,
+//! you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
+//!
+// ISSUE: Document the meaning of "newline", and the handling of NUL.
+//
+#define SIM_CONTROL_PUTC 12
+
+//! If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
+//! this core.  This is intended to be used before a loop that will
+//! invalidate the cache by loading new data and evicting all current data.
+//! Generally speaking, this API should only be used by system code.
+//!
+#define SIM_CONTROL_GRINDER_CLEAR 13
+
+//! If written to SPR_SIM_CONTROL, shuts down the simulator.
+//!
+#define SIM_CONTROL_SHUTDOWN 14
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that a fork syscall just created the given process.
+//!
+#define SIM_CONTROL_OS_FORK 15
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that an exit syscall was just executed by the given process.
+//!
+#define SIM_CONTROL_OS_EXIT 16
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that the OS just switched to the given process.
+//!
+#define SIM_CONTROL_OS_SWITCH 17
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that an exec syscall was just executed. Written to once for
+//! each character in the executable name, plus a final NUL.
+//!
+#define SIM_CONTROL_OS_EXEC 18
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that an interpreter (PT_INTERP) was loaded.  Written to once
+//! for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
+//! hex load address starting with "0x", and "PATH" is the executable name.
+//!
+#define SIM_CONTROL_OS_INTERP 19
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that a dll was loaded.  Written to once for each character
+//! in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
+//! address starting with "0x", and "PATH" is the executable name.
+//!
+#define SIM_CONTROL_DLOPEN 20
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that a dll was unloaded.  Written to once for each character
+//! in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
+//! address starting with "0x".
+//!
+#define SIM_CONTROL_DLCLOSE 21
+
+//! If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
+//! indicates whether to allow data reads to remotely-cached
+//! dirty cache lines to be cached locally without grinder warnings or
+//! assertions (used by Linux kernel fast memcpy).
+//!
+#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22
+
+//! If written to SPR_SIM_CONTROL, enables memory tracing.
+//!
+#define SIM_CONTROL_ENABLE_MEM_LOGGING 23
+
+//! If written to SPR_SIM_CONTROL, disables memory tracing.
+//!
+#define SIM_CONTROL_DISABLE_MEM_LOGGING 24
+
+//! If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
+//! the gbe or xgbe shims. Must specify the shim id, the type, the units, and
+//! the rate, as defined in SIM_SHAPING_SPR_ARG.
+//!
+#define SIM_CONTROL_SHAPING 25
+
+//! If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
+//! requests that a simulator command be executed.  Written to once for each
+//! character in the command, plus a final NUL.
+//!
+#define SIM_CONTROL_COMMAND 26
+
+//! If written to SPR_SIM_CONTROL, indicates that the simulated system
+//! is panicking, to allow debugging via --debug-on-panic.
+//!
+#define SIM_CONTROL_PANIC 27
+
+//! If written to SPR_SIM_CONTROL, triggers a simulator syscall.
+//! See "sim_syscall()" for more info.
+//!
+#define SIM_CONTROL_SYSCALL 32
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
+//! use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
+//!
+#define SIM_CONTROL_OS_FORK_PARENT 33
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8), clears the pending magic data section.  The cleared
+//! pending magic data section and any subsequently appended magic bytes
+//! will only take effect when the classifier blast programmer is run.
+#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8) and a byte of data (shifted by 16), appends that byte
+//! to the shim's pending magic data section.  The pending magic data
+//! section takes effect when the classifier blast programmer is run.
+#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
+//! mask of links (shifted by 32), enable or disable the corresponding
+//! mPIPE links.
+#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36
+
+//== Syscall numbers for use with "sim_syscall()".
+
+//! Syscall number for sim_add_watchpoint().
+//!
+#define SIM_SYSCALL_ADD_WATCHPOINT 2
+
+//! Syscall number for sim_remove_watchpoint().
+//!
+#define SIM_SYSCALL_REMOVE_WATCHPOINT 3
+
+//! Syscall number for sim_query_watchpoint().
+//!
+#define SIM_SYSCALL_QUERY_WATCHPOINT 4
+
+//! Syscall number that asserts that the cache lines whose 64-bit PA
+//! is passed as the second argument to sim_syscall(), and over a
+//! range passed as the third argument, are no longer in cache.
+//! The simulator raises an error if this is not the case.
+//!
+#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Enable --trace-cycle when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_CYCLES          0x01
+
+//! Enable --trace-router when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_ROUTER          0x02
+
+//! Enable --trace-register-writes when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_REGISTER_WRITES 0x04
+
+//! Enable --trace-disasm when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_DISASM          0x08
+
+//! Enable --trace-stall-info when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_STALL_INFO      0x10
+
+//! Enable --trace-memory-controller when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_MEMORY_CONTROLLER 0x20
+
+//! Enable --trace-l2 when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_L2_CACHE 0x40
+
+//! Enable --trace-lines when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_LINES 0x80
+
+//! Turn off all tracing when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_NONE 0
+
+//! Turn on all tracing when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_ALL (-1)
+
+//! @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to set tracing flags.
+//!
+#define SIM_TRACE_SPR_ARG(mask) \
+  (SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Dump the general-purpose registers.
+//!
+#define SIM_DUMP_REGS          0x001
+
+//! Dump the SPRs.
+//!
+#define SIM_DUMP_SPRS          0x002
+
+//! Dump the ITLB.
+//!
+#define SIM_DUMP_ITLB          0x004
+
+//! Dump the DTLB.
+//!
+#define SIM_DUMP_DTLB          0x008
+
+//! Dump the L1 I-cache.
+//!
+#define SIM_DUMP_L1I           0x010
+
+//! Dump the L1 D-cache.
+//!
+#define SIM_DUMP_L1D           0x020
+
+//! Dump the L2 cache.
+//!
+#define SIM_DUMP_L2            0x040
+
+//! Dump the switch registers.
+//!
+#define SIM_DUMP_SNREGS        0x080
+
+//! Dump the switch ITLB.
+//!
+#define SIM_DUMP_SNITLB        0x100
+
+//! Dump the switch L1 I-cache.
+//!
+#define SIM_DUMP_SNL1I         0x200
+
+//! Dump the current backtrace.
+//!
+#define SIM_DUMP_BACKTRACE     0x400
+
+//! Only dump valid lines in caches.
+//!
+#define SIM_DUMP_VALID_LINES   0x800
+
+//! Dump everything that is dumpable.
+//!
+#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES)
+
+// @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to dump machine state.
+//!
+#define SIM_DUMP_SPR_ARG(mask) \
+  (SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers.
+//!
+#define SIM_CHIP_MEMCTL        0x001
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface.
+//!
+#define SIM_CHIP_XAUI          0x002
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface.
+//!
+#define SIM_CHIP_PCIE          0x004
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface.
+//!
+#define SIM_CHIP_MPIPE         0x008
+
+//! Reference all chip devices.
+//!
+#define SIM_CHIP_ALL (-1)
+
+//! @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to clear chip statistics.
+//!
+#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \
+  (SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.
+//!
+#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \
+  (SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to enable chip statistics.
+//!
+#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \
+  (SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+
+// Shim bitrate controls.
+
+//! The number of bits used to store the shim id.
+//!
+#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Change the gbe 0 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_0 0x0
+
+//! Change the gbe 1 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_1 0x1
+
+//! Change the gbe 2 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_2 0x2
+
+//! Change the gbe 3 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_3 0x3
+
+//! Change the xgbe 0 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_XGBE_0 0x4
+
+//! Change the xgbe 1 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_XGBE_1 0x5
+
+//! The type of shaping to do.
+//!
+#define SIM_CONTROL_SHAPING_TYPE_BITS 2
+
+//! Control the multiplier.
+//!
+#define SIM_CONTROL_SHAPING_MULTIPLIER 0
+
+//! Control the PPS.
+//!
+#define SIM_CONTROL_SHAPING_PPS 1
+
+//! Control the BPS.
+//!
+#define SIM_CONTROL_SHAPING_BPS 2
+
+//! The number of bits for the units for the shaping parameter.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_BITS 2
+
+//! Provide a number in single units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0
+
+//! Provide a number in kilo units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_KILO 1
+
+//! Provide a number in mega units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_MEGA 2
+
+//! Provide a number in giga units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_GIGA 3
+
+// @}
+
+//! How many bits are available for the rate.
+//!
+#define SIM_CONTROL_SHAPING_RATE_BITS \
+  (32 - (_SIM_CONTROL_OPERATOR_BITS + \
+         SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+         SIM_CONTROL_SHAPING_TYPE_BITS + \
+         SIM_CONTROL_SHAPING_UNITS_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to change a bitrate.
+//!
+#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \
+  (SIM_CONTROL_SHAPING | \
+   ((shim) | \
+   ((type) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS)) | \
+   ((units) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+                SIM_CONTROL_SHAPING_TYPE_BITS)) | \
+   ((rate) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+               SIM_CONTROL_SHAPING_TYPE_BITS + \
+               SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS)
+
+
+//== Values returned when reading SPR_SIM_CONTROL.
+// ISSUE: These names should share a longer common prefix.
+
+//! When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
+//! (SIM_TRACE_xxx values).
+//!
+#define SIM_TRACE_FLAG_MASK 0xFFFF
+
+//! When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled.
+//!
+#define SIM_PROFILER_ENABLED_MASK 0x10000
+
+
+//== Special arguments for "SIM_CONTROL_PUTC".
+
+//! Flag value for forcing a PUTC string-flush, including
+//! coordinate/cycle prefix and newline.
+//!
+#define SIM_PUTC_FLUSH_STRING 0x100
+
+//! Flag value for forcing a PUTC binary-data-flush, which skips the
+//! prefix and does not append a newline.
+//!
+#define SIM_PUTC_FLUSH_BINARY 0x101
+
+
+#endif //__ARCH_SIM_DEF_H__
diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h
new file mode 100644
index 00000000000..c8fdbd9a45e
--- /dev/null
+++ b/arch/tile/include/arch/spr_def.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifdef __tilegx__
+#include <arch/spr_def_64.h>
+#else
+#include <arch/spr_def_32.h>
+#endif
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/arch/spr_def_32.h
new file mode 100644
index 00000000000..b4fc06864df
--- /dev/null
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef __DOXYGEN__
+
+#ifndef __ARCH_SPR_DEF_H__
+#define __ARCH_SPR_DEF_H__
+
+#define SPR_AUX_PERF_COUNT_0 0x6005
+#define SPR_AUX_PERF_COUNT_1 0x6006
+#define SPR_AUX_PERF_COUNT_CTL 0x6007
+#define SPR_AUX_PERF_COUNT_STS 0x6008
+#define SPR_CYCLE_HIGH 0x4e06
+#define SPR_CYCLE_LOW 0x4e07
+#define SPR_DMA_BYTE 0x3900
+#define SPR_DMA_CHUNK_SIZE 0x3901
+#define SPR_DMA_CTR 0x3902
+#define SPR_DMA_CTR__REQUEST_MASK  0x1
+#define SPR_DMA_CTR__SUSPEND_MASK  0x2
+#define SPR_DMA_DST_ADDR 0x3903
+#define SPR_DMA_DST_CHUNK_ADDR 0x3904
+#define SPR_DMA_SRC_ADDR 0x3905
+#define SPR_DMA_SRC_CHUNK_ADDR 0x3906
+#define SPR_DMA_STATUS__DONE_MASK  0x1
+#define SPR_DMA_STATUS__BUSY_MASK  0x2
+#define SPR_DMA_STATUS__RUNNING_MASK  0x10
+#define SPR_DMA_STRIDE 0x3907
+#define SPR_DMA_USER_STATUS 0x3908
+#define SPR_DONE 0x4e08
+#define SPR_EVENT_BEGIN 0x4e0d
+#define SPR_EVENT_END 0x4e0e
+#define SPR_EX_CONTEXT_0_0 0x4a05
+#define SPR_EX_CONTEXT_0_1 0x4a06
+#define SPR_EX_CONTEXT_0_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_0_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_0_1__PL_MASK  0x3
+#define SPR_EX_CONTEXT_0_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_0_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_0_1__ICS_MASK  0x4
+#define SPR_EX_CONTEXT_1_0 0x4805
+#define SPR_EX_CONTEXT_1_1 0x4806
+#define SPR_EX_CONTEXT_1_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_1_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_1_1__PL_MASK  0x3
+#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_1_1__ICS_MASK  0x4
+#define SPR_FAIL 0x4e09
+#define SPR_INTCTRL_0_STATUS 0x4a07
+#define SPR_INTCTRL_1_STATUS 0x4807
+#define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a
+#define SPR_INTERRUPT_MASK_0_0 0x4a08
+#define SPR_INTERRUPT_MASK_0_1 0x4a09
+#define SPR_INTERRUPT_MASK_1_0 0x4809
+#define SPR_INTERRUPT_MASK_1_1 0x480a
+#define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a
+#define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b
+#define SPR_INTERRUPT_MASK_RESET_1_0 0x480b
+#define SPR_INTERRUPT_MASK_RESET_1_1 0x480c
+#define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c
+#define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d
+#define SPR_INTERRUPT_MASK_SET_1_0 0x480d
+#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
+#define SPR_MPL_DMA_CPL_SET_0 0x5800
+#define SPR_MPL_DMA_CPL_SET_1 0x5801
+#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
+#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
+#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
+#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
+#define SPR_MPL_INTCTRL_1_SET_0 0x4800
+#define SPR_MPL_INTCTRL_1_SET_1 0x4801
+#define SPR_MPL_SN_ACCESS_SET_0 0x0800
+#define SPR_MPL_SN_ACCESS_SET_1 0x0801
+#define SPR_MPL_SN_CPL_SET_0 0x5a00
+#define SPR_MPL_SN_CPL_SET_1 0x5a01
+#define SPR_MPL_SN_FIREWALL_SET_0 0x2c00
+#define SPR_MPL_SN_FIREWALL_SET_1 0x2c01
+#define SPR_MPL_SN_NOTIFY_SET_0 0x2a00
+#define SPR_MPL_SN_NOTIFY_SET_1 0x2a01
+#define SPR_MPL_UDN_ACCESS_SET_0 0x0c00
+#define SPR_MPL_UDN_ACCESS_SET_1 0x0c01
+#define SPR_MPL_UDN_AVAIL_SET_0 0x4000
+#define SPR_MPL_UDN_AVAIL_SET_1 0x4001
+#define SPR_MPL_UDN_CA_SET_0 0x3c00
+#define SPR_MPL_UDN_CA_SET_1 0x3c01
+#define SPR_MPL_UDN_COMPLETE_SET_0 0x1400
+#define SPR_MPL_UDN_COMPLETE_SET_1 0x1401
+#define SPR_MPL_UDN_FIREWALL_SET_0 0x3000
+#define SPR_MPL_UDN_FIREWALL_SET_1 0x3001
+#define SPR_MPL_UDN_REFILL_SET_0 0x1000
+#define SPR_MPL_UDN_REFILL_SET_1 0x1001
+#define SPR_MPL_UDN_TIMER_SET_0 0x3600
+#define SPR_MPL_UDN_TIMER_SET_1 0x3601
+#define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00
+#define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01
+#define SPR_PASS 0x4e0b
+#define SPR_PERF_COUNT_0 0x4205
+#define SPR_PERF_COUNT_1 0x4206
+#define SPR_PERF_COUNT_CTL 0x4207
+#define SPR_PERF_COUNT_STS 0x4208
+#define SPR_PROC_STATUS 0x4f00
+#define SPR_SIM_CONTROL 0x4e0c
+#define SPR_SNCTL 0x0805
+#define SPR_SNCTL__FRZFABRIC_MASK  0x1
+#define SPR_SNCTL__FRZPROC_MASK  0x2
+#define SPR_SNPC 0x080b
+#define SPR_SNSTATIC 0x080c
+#define SPR_SYSTEM_SAVE_0_0 0x4b00
+#define SPR_SYSTEM_SAVE_0_1 0x4b01
+#define SPR_SYSTEM_SAVE_0_2 0x4b02
+#define SPR_SYSTEM_SAVE_0_3 0x4b03
+#define SPR_SYSTEM_SAVE_1_0 0x4900
+#define SPR_SYSTEM_SAVE_1_1 0x4901
+#define SPR_SYSTEM_SAVE_1_2 0x4902
+#define SPR_SYSTEM_SAVE_1_3 0x4903
+#define SPR_TILE_COORD 0x4c17
+#define SPR_TILE_RTF_HWM 0x4e10
+#define SPR_TILE_TIMER_CONTROL 0x3205
+#define SPR_TILE_WRITE_PENDING 0x4e0f
+#define SPR_UDN_AVAIL_EN 0x4005
+#define SPR_UDN_CA_DATA 0x0d00
+#define SPR_UDN_DATA_AVAIL 0x0d03
+#define SPR_UDN_DEADLOCK_TIMEOUT 0x3606
+#define SPR_UDN_DEMUX_CA_COUNT 0x0c05
+#define SPR_UDN_DEMUX_COUNT_0 0x0c06
+#define SPR_UDN_DEMUX_COUNT_1 0x0c07
+#define SPR_UDN_DEMUX_COUNT_2 0x0c08
+#define SPR_UDN_DEMUX_COUNT_3 0x0c09
+#define SPR_UDN_DEMUX_CTL 0x0c0a
+#define SPR_UDN_DEMUX_QUEUE_SEL 0x0c0c
+#define SPR_UDN_DEMUX_STATUS 0x0c0d
+#define SPR_UDN_DEMUX_WRITE_FIFO 0x0c0e
+#define SPR_UDN_DIRECTION_PROTECT 0x3005
+#define SPR_UDN_REFILL_EN 0x1005
+#define SPR_UDN_SP_FIFO_DATA 0x0c11
+#define SPR_UDN_SP_FIFO_SEL 0x0c12
+#define SPR_UDN_SP_FREEZE 0x0c13
+#define SPR_UDN_SP_FREEZE__SP_FRZ_MASK  0x1
+#define SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK  0x2
+#define SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK  0x4
+#define SPR_UDN_SP_STATE 0x0c14
+#define SPR_UDN_TAG_0 0x0c15
+#define SPR_UDN_TAG_1 0x0c16
+#define SPR_UDN_TAG_2 0x0c17
+#define SPR_UDN_TAG_3 0x0c18
+#define SPR_UDN_TAG_VALID 0x0c19
+#define SPR_UDN_TILE_COORD 0x0c1a
+
+#endif /* !defined(__ARCH_SPR_DEF_H__) */
+
+#endif /* !defined(__DOXYGEN__) */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
new file mode 100644
index 00000000000..3b8f55b82de
--- /dev/null
+++ b/arch/tile/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += ucontext.h
diff --git a/arch/tile/include/asm/asm-offsets.h b/arch/tile/include/asm/asm-offsets.h
new file mode 100644
index 00000000000..d370ee36a18
--- /dev/null
+++ b/arch/tile/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h
new file mode 100644
index 00000000000..b8c49f98a44
--- /dev/null
+++ b/arch/tile/include/asm/atomic.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Atomic primitives.
+ */
+
+#ifndef _ASM_TILE_ATOMIC_H
+#define _ASM_TILE_ATOMIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+       return v->counter;
+}
+
+/**
+ * atomic_sub_return - subtract integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to subtract
+ *
+ * Atomically subtracts @i from @v and returns @v - @i
+ */
+#define atomic_sub_return(i, v)		atomic_add_return((int)(-(i)), (v))
+
+/**
+ * atomic_sub - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+#define atomic_sub(i, v)		atomic_add((int)(-(i)), (v))
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns true if the result is
+ * zero, or false for all other cases.
+ */
+#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
+
+/**
+ * atomic_inc_return - increment memory and return
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns the new value.
+ */
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+
+/**
+ * atomic_dec_return - decrement memory and return
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns the new value.
+ */
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v)			atomic_add(1, (v))
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns true if the result is 0.
+ */
+#define atomic_dec_and_test(v)		(atomic_dec_return(v) == 0)
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns true if the result is 0.
+ */
+#define atomic_inc_and_test(v)		(atomic_inc_return(v) == 0)
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true if the result is
+ * negative, or false when result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v)	(atomic_add_return((i), (v)) < 0)
+
+/**
+ * atomic_inc_not_zero - increment unless the number is zero
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1, so long as @v is non-zero.
+ * Returns non-zero if @v was non-zero, and zero otherwise.
+ */
+#define atomic_inc_not_zero(v)		atomic_add_unless((v), 1, 0)
+
+
+/*
+ * We define xchg() and cmpxchg() in the included headers.
+ * Note that we do not define __HAVE_ARCH_CMPXCHG, since that would imply
+ * that cmpxchg() is an efficient operation, which is not particularly true.
+ */
+
+/* Nonexistent functions intended to cause link errors. */
+extern unsigned long __xchg_called_with_bad_pointer(void);
+extern unsigned long __cmpxchg_called_with_bad_pointer(void);
+
+#define tas(ptr) (xchg((ptr), 1))
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __tilegx__
+#include <asm/atomic_32.h>
+#else
+#include <asm/atomic_64.h>
+#endif
+
+/* Provide the appropriate atomic_long_t definitions. */
+#ifndef __ASSEMBLY__
+#include <asm-generic/atomic-long.h>
+#endif
+
+#endif /* _ASM_TILE_ATOMIC_H */
diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h
new file mode 100644
index 00000000000..40a5a3a876d
--- /dev/null
+++ b/arch/tile/include/asm/atomic_32.h
@@ -0,0 +1,370 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Do not include directly; use <asm/atomic.h>.
+ */
+
+#ifndef _ASM_TILE_ATOMIC_32_H
+#define _ASM_TILE_ATOMIC_32_H
+
+#include <arch/chip.h>
+
+#ifndef __ASSEMBLY__
+
+/* Tile-specific routines to support <asm/atomic.h>. */
+int _atomic_xchg(atomic_t *v, int n);
+int _atomic_xchg_add(atomic_t *v, int i);
+int _atomic_xchg_add_unless(atomic_t *v, int a, int u);
+int _atomic_cmpxchg(atomic_t *v, int o, int n);
+
+/**
+ * atomic_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline int atomic_xchg(atomic_t *v, int n)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic_xchg(v, n);
+}
+
+/**
+ * atomic_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic_cmpxchg(v, o, n);
+}
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	_atomic_xchg_add(v, i);
+}
+
+/**
+ * atomic_add_return - add integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic_xchg_add(v, i) + i;
+}
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic_xchg_add_unless(v, a, u) != u;
+}
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ *
+ * atomic_set() can't be just a raw store, since it would be lost if it
+ * fell between the load and store of one of the other atomic ops.
+ */
+static inline void atomic_set(atomic_t *v, int n)
+{
+	_atomic_xchg(v, n);
+}
+
+#define xchg(ptr, x) ((typeof(*(ptr))) \
+  ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \
+   atomic_xchg((atomic_t *)(ptr), (long)(x)) : \
+   __xchg_called_with_bad_pointer()))
+
+#define cmpxchg(ptr, o, n) ((typeof(*(ptr))) \
+  ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \
+   atomic_cmpxchg((atomic_t *)(ptr), (long)(o), (long)(n)) : \
+   __cmpxchg_called_with_bad_pointer()))
+
+/* A 64bit atomic type */
+
+typedef struct {
+	u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(val) { (val) }
+
+u64 _atomic64_xchg(atomic64_t *v, u64 n);
+u64 _atomic64_xchg_add(atomic64_t *v, u64 i);
+u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u);
+u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n);
+
+/**
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline u64 atomic64_read(const atomic64_t *v)
+{
+	/*
+	 * Requires an atomic op to read both 32-bit parts consistently.
+	 * Casting away const is safe since the atomic support routines
+	 * do not write to memory if the value has not been modified.
+	 */
+	return _atomic64_xchg_add((atomic64_t *)v, 0);
+}
+
+/**
+ * atomic64_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic64_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline u64 atomic64_xchg(atomic64_t *v, u64 n)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic64_xchg(v, n);
+}
+
+/**
+ * atomic64_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic64_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic64_cmpxchg(v, o, n);
+}
+
+/**
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+	_atomic64_xchg_add(v, i);
+}
+
+/**
+ * atomic64_add_return - add integer and return
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic64_xchg_add(v, i) + i;
+}
+
+/**
+ * atomic64_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+	smp_mb();  /* barrier for proper semantics */
+	return _atomic64_xchg_add_unless(v, a, u) != u;
+}
+
+/**
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ *
+ * atomic64_set() can't be just a raw store, since it would be lost if it
+ * fell between the load and store of one of the other atomic ops.
+ */
+static inline void atomic64_set(atomic64_t *v, u64 n)
+{
+	_atomic64_xchg(v, n);
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v)			atomic64_add(1LL, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v)	(atomic64_inc_return(v) == 0)
+#define atomic64_sub_return(i, v)	atomic64_add_return(-(i), (v))
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_sub(i, v)		atomic64_add(-(i), (v))
+#define atomic64_dec(v)			atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1LL, 0LL)
+
+/*
+ * We need to barrier before modifying the word, since the _atomic_xxx()
+ * routines just tns the lock and then read/modify/write of the word.
+ * But after the word is updated, the routine issues an "mf" before returning,
+ * and since it's a function call, we don't even need a compiler barrier.
+ */
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_dec()	do { } while (0)
+#define smp_mb__after_atomic_inc()	do { } while (0)
+
+
+/*
+ * Support "tns" atomic integers.  These are atomic integers that can
+ * hold any value but "1".  They are more efficient than regular atomic
+ * operations because the "lock" (aka acquire) step is a single "tns"
+ * in the uncontended case, and the "unlock" (aka release) step is a
+ * single "store" without an mf.  (However, note that on tilepro the
+ * "tns" will evict the local cache line, so it's not all upside.)
+ *
+ * Note that you can ONLY observe the value stored in the pointer
+ * using these operations; a direct read of the value may confusingly
+ * return the special value "1".
+ */
+
+int __tns_atomic_acquire(atomic_t *);
+void __tns_atomic_release(atomic_t *p, int v);
+
+static inline void tns_atomic_set(atomic_t *v, int i)
+{
+	__tns_atomic_acquire(v);
+	__tns_atomic_release(v, i);
+}
+
+static inline int tns_atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+	int ret = __tns_atomic_acquire(v);
+	__tns_atomic_release(v, (ret == o) ? n : ret);
+	return ret;
+}
+
+static inline int tns_atomic_xchg(atomic_t *v, int n)
+{
+	int ret = __tns_atomic_acquire(v);
+	__tns_atomic_release(v, n);
+	return ret;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Internal definitions only beyond this point.
+ */
+
+#define ATOMIC_LOCKS_FOUND_VIA_TABLE() \
+  (!CHIP_HAS_CBOX_HOME_MAP() && defined(CONFIG_SMP))
+
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+/* Number of entries in atomic_lock_ptr[]. */
+#define ATOMIC_HASH_L1_SHIFT 6
+#define ATOMIC_HASH_L1_SIZE (1 << ATOMIC_HASH_L1_SHIFT)
+
+/* Number of locks in each struct pointed to by atomic_lock_ptr[]. */
+#define ATOMIC_HASH_L2_SHIFT (CHIP_L2_LOG_LINE_SIZE() - 2)
+#define ATOMIC_HASH_L2_SIZE (1 << ATOMIC_HASH_L2_SHIFT)
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/*
+ * Number of atomic locks in atomic_locks[]. Must be a power of two.
+ * There is no reason for more than PAGE_SIZE / 8 entries, since that
+ * is the maximum number of pointer bits we can use to index this.
+ * And we cannot have more than PAGE_SIZE / 4, since this has to
+ * fit on a single page and each entry takes 4 bytes.
+ */
+#define ATOMIC_HASH_SHIFT (PAGE_SHIFT - 3)
+#define ATOMIC_HASH_SIZE (1 << ATOMIC_HASH_SHIFT)
+
+#ifndef __ASSEMBLY__
+extern int atomic_locks[];
+#endif
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/*
+ * All the code that may fault while holding an atomic lock must
+ * place the pointer to the lock in ATOMIC_LOCK_REG so the fault code
+ * can correctly release and reacquire the lock.  Note that we
+ * mention the register number in a comment in "lib/atomic_asm.S" to help
+ * assembly coders from using this register by mistake, so if it
+ * is changed here, change that comment as well.
+ */
+#define ATOMIC_LOCK_REG 20
+#define ATOMIC_LOCK_REG_NAME r20
+
+#ifndef __ASSEMBLY__
+/* Called from setup to initialize a hash table to point to per_cpu locks. */
+void __init_atomic_per_cpu(void);
+
+#ifdef CONFIG_SMP
+/* Support releasing the atomic lock in do_page_fault_ics(). */
+void __atomic_fault_unlock(int *lock_ptr);
+#endif
+
+/* Private helper routines in lib/atomic_asm_32.S */
+extern struct __get_user __atomic_cmpxchg(volatile int *p,
+					  int *lock, int o, int n);
+extern struct __get_user __atomic_xchg(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xchg_add(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xchg_add_unless(volatile int *p,
+						  int *lock, int o, int n);
+extern struct __get_user __atomic_or(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n);
+extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n);
+extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n);
+extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n);
+extern u64 __atomic64_xchg_add_unless(volatile u64 *p,
+				      int *lock, u64 o, u64 n);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_ATOMIC_32_H */
diff --git a/arch/tile/include/asm/auxvec.h b/arch/tile/include/asm/auxvec.h
new file mode 100644
index 00000000000..1d393edb064
--- /dev/null
+++ b/arch/tile/include/asm/auxvec.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_AUXVEC_H
+#define _ASM_TILE_AUXVEC_H
+
+/* No extensions to auxvec */
+
+#endif /* _ASM_TILE_AUXVEC_H */
diff --git a/arch/tile/include/asm/backtrace.h b/arch/tile/include/asm/backtrace.h
new file mode 100644
index 00000000000..6970bfcad54
--- /dev/null
+++ b/arch/tile/include/asm/backtrace.h
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _TILE_BACKTRACE_H
+#define _TILE_BACKTRACE_H
+
+
+
+#include <linux/types.h>
+
+#include <arch/chip.h>
+
+#if CHIP_VA_WIDTH() > 32
+typedef unsigned long long VirtualAddress;
+#else
+typedef unsigned int VirtualAddress;
+#endif
+
+
+/** Reads 'size' bytes from 'address' and writes the data to 'result'.
+ * Returns true if successful, else false (e.g. memory not readable).
+ */
+typedef bool (*BacktraceMemoryReader)(void *result,
+				      VirtualAddress address,
+				      unsigned int size,
+				      void *extra);
+
+typedef struct {
+	/** Current PC. */
+	VirtualAddress pc;
+
+	/** Current stack pointer value. */
+	VirtualAddress sp;
+
+	/** Current frame pointer value (i.e. caller's stack pointer) */
+	VirtualAddress fp;
+
+	/** Internal use only: caller's PC for first frame. */
+	VirtualAddress initial_frame_caller_pc;
+
+	/** Internal use only: callback to read memory. */
+	BacktraceMemoryReader read_memory_func;
+
+	/** Internal use only: arbitrary argument to read_memory_func. */
+	void *read_memory_func_extra;
+
+} BacktraceIterator;
+
+
+/** Initializes a backtracer to start from the given location.
+ *
+ * If the frame pointer cannot be determined it is set to -1.
+ *
+ * @param state The state to be filled in.
+ * @param read_memory_func A callback that reads memory. If NULL, a default
+ *        value is provided.
+ * @param read_memory_func_extra An arbitrary argument to read_memory_func.
+ * @param pc The current PC.
+ * @param lr The current value of the 'lr' register.
+ * @param sp The current value of the 'sp' register.
+ * @param r52 The current value of the 'r52' register.
+ */
+extern void backtrace_init(BacktraceIterator *state,
+			   BacktraceMemoryReader read_memory_func,
+			   void *read_memory_func_extra,
+			   VirtualAddress pc, VirtualAddress lr,
+			   VirtualAddress sp, VirtualAddress r52);
+
+
+/** Advances the backtracing state to the calling frame, returning
+ * true iff successful.
+ */
+extern bool backtrace_next(BacktraceIterator *state);
+
+
+typedef enum {
+
+	/* We have no idea what the caller's pc is. */
+	PC_LOC_UNKNOWN,
+
+	/* The caller's pc is currently in lr. */
+	PC_LOC_IN_LR,
+
+	/* The caller's pc can be found by dereferencing the caller's sp. */
+	PC_LOC_ON_STACK
+
+} CallerPCLocation;
+
+
+typedef enum {
+
+	/* We have no idea what the caller's sp is. */
+	SP_LOC_UNKNOWN,
+
+	/* The caller's sp is currently in r52. */
+	SP_LOC_IN_R52,
+
+	/* The caller's sp can be found by adding a certain constant
+	 * to the current value of sp.
+	 */
+	SP_LOC_OFFSET
+
+} CallerSPLocation;
+
+
+/* Bit values ORed into CALLER_* values for info ops. */
+enum {
+	/* Setting the low bit on any of these values means the info op
+	 * applies only to one bundle ago.
+	 */
+	ONE_BUNDLE_AGO_FLAG = 1,
+
+	/* Setting this bit on a CALLER_SP_* value means the PC is in LR.
+	 * If not set, PC is on the stack.
+	 */
+	PC_IN_LR_FLAG = 2,
+
+	/* This many of the low bits of a CALLER_SP_* value are for the
+	 * flag bits above.
+	 */
+	NUM_INFO_OP_FLAGS = 2,
+
+	/* We cannot have one in the memory pipe so this is the maximum. */
+	MAX_INFO_OPS_PER_BUNDLE = 2
+};
+
+
+/** Internal constants used to define 'info' operands. */
+enum {
+	/* 0 and 1 are reserved, as are all negative numbers. */
+
+	CALLER_UNKNOWN_BASE = 2,
+
+	CALLER_SP_IN_R52_BASE = 4,
+
+	CALLER_SP_OFFSET_BASE = 8
+};
+
+
+/** Current backtracer state describing where it thinks the caller is. */
+typedef struct {
+	/*
+	 * Public fields
+	 */
+
+	/* How do we find the caller's PC? */
+	CallerPCLocation pc_location : 8;
+
+	/* How do we find the caller's SP? */
+	CallerSPLocation sp_location : 8;
+
+	/* If sp_location == SP_LOC_OFFSET, then caller_sp == sp +
+	 * loc->sp_offset. Else this field is undefined.
+	 */
+	uint16_t sp_offset;
+
+	/* In the most recently visited bundle a terminating bundle? */
+	bool at_terminating_bundle;
+
+	/*
+	 * Private fields
+	 */
+
+	/* Will the forward scanner see someone clobbering sp
+	 * (i.e. changing it with something other than addi sp, sp, N?)
+	 */
+	bool sp_clobber_follows;
+
+	/* Operand to next "visible" info op (no more than one bundle past
+	 * the next terminating bundle), or -32768 if none.
+	 */
+	int16_t next_info_operand;
+
+	/* Is the info of in next_info_op in the very next bundle? */
+	bool is_next_info_operand_adjacent;
+
+} CallerLocation;
+
+
+
+
+#endif /* _TILE_BACKTRACE_H */
diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h
new file mode 100644
index 00000000000..84600f3514d
--- /dev/null
+++ b/arch/tile/include/asm/bitops.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_BITOPS_H
+#define _ASM_TILE_BITOPS_H
+
+#include <linux/types.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#ifdef __tilegx__
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+
+/**
+ * __ffs - find first set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	return __builtin_ctzl(word);
+}
+
+/**
+ * ffz - find first zero bit in word
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __builtin_ctzl(~word);
+}
+
+/**
+ * __fls - find last set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	return (sizeof(word) * 8) - 1 - __builtin_clzl(word);
+}
+
+/**
+ * ffs - find first set bit in word
+ * @x: the word to search
+ *
+ * This is defined the same way as the libc and compiler builtin ffs
+ * routines, therefore differs in spirit from the other bitops.
+ *
+ * ffs(value) returns 0 if value is 0 or the position of the first
+ * set bit if value is nonzero. The first (least significant) bit
+ * is at position 1.
+ */
+static inline int ffs(int x)
+{
+	return __builtin_ffs(x);
+}
+
+/**
+ * fls - find last set bit in word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffs, but returns the position of the most significant set bit.
+ *
+ * fls(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 32.
+ */
+static inline int fls(int x)
+{
+	return (sizeof(int) * 8) - __builtin_clz(x);
+}
+
+static inline int fls64(__u64 w)
+{
+	return (sizeof(__u64) * 8) - __builtin_clzll(w);
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+	return __builtin_popcount(w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	return __builtin_popcount(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	return __builtin_popcount(w & 0xff);
+}
+
+static inline unsigned long hweight64(__u64 w)
+{
+	return __builtin_popcountll(w);
+}
+
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* _ASM_TILE_BITOPS_H */
diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h
new file mode 100644
index 00000000000..7a93c001ac1
--- /dev/null
+++ b/arch/tile/include/asm/bitops_32.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_BITOPS_32_H
+#define _ASM_TILE_BITOPS_32_H
+
+#include <linux/compiler.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/* Tile-specific routines to support <asm/bitops.h>. */
+unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask);
+unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask);
+unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask);
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.
+ * See __set_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned nr, volatile unsigned long *addr)
+{
+	_atomic_or(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.
+ * See __clear_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * clear_bit() may not contain a memory barrier, so if it is used for
+ * locking purposes, you should call smp_mb__before_clear_bit() and/or
+ * smp_mb__after_clear_bit() to ensure changes are visible on other cpus.
+ */
+static inline void clear_bit(unsigned nr, volatile unsigned long *addr)
+{
+	_atomic_andn(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * See __change_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned nr, volatile unsigned long *addr)
+{
+	_atomic_xor(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	addr += BIT_WORD(nr);
+	smp_mb();  /* barrier for proper semantics */
+	return (_atomic_or(addr, mask) & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	addr += BIT_WORD(nr);
+	smp_mb();  /* barrier for proper semantics */
+	return (_atomic_andn(addr, mask) & mask) != 0;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned nr,
+				      volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	addr += BIT_WORD(nr);
+	smp_mb();  /* barrier for proper semantics */
+	return (_atomic_xor(addr, mask) & mask) != 0;
+}
+
+/* See discussion at smp_mb__before_atomic_dec() in <asm/atomic.h>. */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	do {} while (0)
+
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* _ASM_TILE_BITOPS_32_H */
diff --git a/arch/tile/include/asm/bitsperlong.h b/arch/tile/include/asm/bitsperlong.h
new file mode 100644
index 00000000000..58c771f2af2
--- /dev/null
+++ b/arch/tile/include/asm/bitsperlong.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_BITSPERLONG_H
+#define _ASM_TILE_BITSPERLONG_H
+
+#ifdef __LP64__
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _ASM_TILE_BITSPERLONG_H */
diff --git a/arch/tile/include/asm/bug.h b/arch/tile/include/asm/bug.h
new file mode 100644
index 00000000000..b12fd89e42e
--- /dev/null
+++ b/arch/tile/include/asm/bug.h
@@ -0,0 +1 @@
+#include <asm-generic/bug.h>
diff --git a/arch/tile/include/asm/bugs.h b/arch/tile/include/asm/bugs.h
new file mode 100644
index 00000000000..61791e1ad9f
--- /dev/null
+++ b/arch/tile/include/asm/bugs.h
@@ -0,0 +1 @@
+#include <asm-generic/bugs.h>
diff --git a/arch/tile/include/asm/byteorder.h b/arch/tile/include/asm/byteorder.h
new file mode 100644
index 00000000000..9558416d578
--- /dev/null
+++ b/arch/tile/include/asm/byteorder.h
@@ -0,0 +1 @@
+#include <linux/byteorder/little_endian.h>
diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h
new file mode 100644
index 00000000000..f6101840c9e
--- /dev/null
+++ b/arch/tile/include/asm/cache.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_CACHE_H
+#define _ASM_TILE_CACHE_H
+
+#include <arch/chip.h>
+
+/* bytes per L1 data cache line */
+#define L1_CACHE_SHIFT		CHIP_L1D_LOG_LINE_SIZE()
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+/* bytes per L2 cache line */
+#define L2_CACHE_SHIFT		CHIP_L2_LOG_LINE_SIZE()
+#define L2_CACHE_BYTES		(1 << L2_CACHE_SHIFT)
+#define L2_CACHE_ALIGN(x)	(((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES)
+
+/*
+ * TILE-Gx is fully coherents so we don't need to define
+ * ARCH_KMALLOC_MINALIGN.
+ */
+#ifndef __tilegx__
+#define ARCH_KMALLOC_MINALIGN	L2_CACHE_BYTES
+#endif
+
+/* use the cache line size for the L2, which is where it counts */
+#define SMP_CACHE_BYTES_SHIFT	L2_CACHE_SHIFT
+#define SMP_CACHE_BYTES		L2_CACHE_BYTES
+#define INTERNODE_CACHE_SHIFT   L2_CACHE_SHIFT
+#define INTERNODE_CACHE_BYTES   L2_CACHE_BYTES
+
+/* Group together read-mostly things to avoid cache false sharing */
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+/*
+ * Attribute for data that is kept read/write coherent until the end of
+ * initialization, then bumped to read/only incoherent for performance.
+ */
+#define __write_once __attribute__((__section__(".w1data")))
+
+#endif /* _ASM_TILE_CACHE_H */
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
new file mode 100644
index 00000000000..c5741da4eea
--- /dev/null
+++ b/arch/tile/include/asm/cacheflush.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_CACHEFLUSH_H
+#define _ASM_TILE_CACHEFLUSH_H
+
+#include <arch/chip.h>
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+#include <linux/cache.h>
+#include <asm/system.h>
+#include <arch/icache.h>
+
+/* Caches are physically-indexed and so don't need special treatment */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+#define flush_icache_user_range(vma, pg, adr, len)	do { } while (0)
+
+/* Flush the icache just on this cpu */
+extern void __flush_icache_range(unsigned long start, unsigned long end);
+
+/* Flush the entire icache on this cpu. */
+#define __flush_icache() __flush_icache_range(0, CHIP_L1I_CACHE_SIZE())
+
+#ifdef CONFIG_SMP
+/*
+ * When the kernel writes to its own text we need to do an SMP
+ * broadcast to make the L1I coherent everywhere.  This includes
+ * module load and single step.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+#else
+#define flush_icache_range __flush_icache_range
+#endif
+
+/*
+ * An update to an executable user page requires icache flushing.
+ * We could carefully update only tiles that are running this process,
+ * and rely on the fact that we flush the icache on every context
+ * switch to avoid doing extra work here.  But for now, I'll be
+ * conservative and just do a global icache flush.
+ */
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+				     struct page *page, unsigned long vaddr,
+				     void *dst, void *src, int len)
+{
+	memcpy(dst, src, len);
+	if (vma->vm_flags & VM_EXEC) {
+		flush_icache_range((unsigned long) dst,
+				   (unsigned long) dst + len);
+	}
+}
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy((dst), (src), (len))
+
+/*
+ * Invalidate a VA range; pads to L2 cacheline boundaries.
+ *
+ * Note that on TILE64, __inv_buffer() actually flushes modified
+ * cache lines in addition to invalidating them, i.e., it's the
+ * same as __finv_buffer().
+ */
+static inline void __inv_buffer(void *buffer, size_t size)
+{
+	char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+	char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+	while (next < finish) {
+		__insn_inv(next);
+		next += CHIP_INV_STRIDE();
+	}
+}
+
+/* Flush a VA range; pads to L2 cacheline boundaries. */
+static inline void __flush_buffer(void *buffer, size_t size)
+{
+	char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+	char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+	while (next < finish) {
+		__insn_flush(next);
+		next += CHIP_FLUSH_STRIDE();
+	}
+}
+
+/* Flush & invalidate a VA range; pads to L2 cacheline boundaries. */
+static inline void __finv_buffer(void *buffer, size_t size)
+{
+	char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+	char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+	while (next < finish) {
+		__insn_finv(next);
+		next += CHIP_FINV_STRIDE();
+	}
+}
+
+
+/* Invalidate a VA range, then memory fence. */
+static inline void inv_buffer(void *buffer, size_t size)
+{
+	__inv_buffer(buffer, size);
+	mb_incoherent();
+}
+
+/* Flush a VA range, then memory fence. */
+static inline void flush_buffer(void *buffer, size_t size)
+{
+	__flush_buffer(buffer, size);
+	mb_incoherent();
+}
+
+/* Flush & invalidate a VA range, then memory fence. */
+static inline void finv_buffer(void *buffer, size_t size)
+{
+	__finv_buffer(buffer, size);
+	mb_incoherent();
+}
+
+#endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/checksum.h b/arch/tile/include/asm/checksum.h
new file mode 100644
index 00000000000..a120766c726
--- /dev/null
+++ b/arch/tile/include/asm/checksum.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_CHECKSUM_H
+#define _ASM_TILE_CHECKSUM_H
+
+#include <asm-generic/checksum.h>
+
+/* Allow us to provide a more optimized do_csum(). */
+__wsum do_csum(const unsigned char *buff, int len);
+#define do_csum do_csum
+
+#endif /* _ASM_TILE_CHECKSUM_H */
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
new file mode 100644
index 00000000000..5a34da6cdd7
--- /dev/null
+++ b/arch/tile/include/asm/compat.h
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_COMPAT_H
+#define _ASM_TILE_COMPAT_H
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+/* "long" and pointer-based types are different. */
+typedef s32		compat_long_t;
+typedef u32		compat_ulong_t;
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_off_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_caddr_t;
+typedef	u32		compat_uptr_t;
+
+/* Many types are "int" or otherwise the same. */
+typedef __kernel_pid_t compat_pid_t;
+typedef __kernel_uid_t __compat_uid_t;
+typedef __kernel_gid_t __compat_gid_t;
+typedef __kernel_uid32_t __compat_uid32_t;
+typedef __kernel_uid32_t __compat_gid32_t;
+typedef __kernel_mode_t compat_mode_t;
+typedef __kernel_dev_t compat_dev_t;
+typedef __kernel_loff_t compat_loff_t;
+typedef __kernel_nlink_t compat_nlink_t;
+typedef __kernel_ipc_pid_t compat_ipc_pid_t;
+typedef __kernel_daddr_t compat_daddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef __kernel_timer_t compat_timer_t;
+typedef __kernel_key_t compat_key_t;
+typedef int compat_int_t;
+typedef s64 compat_s64;
+typedef uint compat_uint_t;
+typedef u64 compat_u64;
+
+/* We use the same register dump format in 32-bit images. */
+typedef unsigned long compat_elf_greg_t;
+#define COMPAT_ELF_NGREG (sizeof(struct pt_regs) / sizeof(compat_elf_greg_t))
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+#define compat_stat stat
+#define compat_statfs statfs
+
+struct compat_sysctl {
+	unsigned int	name;
+	int		nlen;
+	unsigned int	oldval;
+	unsigned int	oldlenp;
+	unsigned int	newval;
+	unsigned int	newlen;
+	unsigned int	__unused[4];
+};
+
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32               compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(long)(s32)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+/* Sign-extend when storing a kernel pointer to a user's ptregs. */
+static inline unsigned long ptr_to_compat_reg(void __user *uptr)
+{
+	return (long)(int)(long __force)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *)regs->sp - len;
+}
+
+static inline int is_compat_task(void)
+{
+	return current_thread_info()->status & TS_COMPAT;
+}
+
+extern int compat_setup_rt_frame(int sig, struct k_sigaction *ka,
+				 siginfo_t *info, sigset_t *set,
+				 struct pt_regs *regs);
+
+/* Compat syscalls. */
+struct compat_sigaction;
+struct compat_siginfo;
+struct compat_sigaltstack;
+long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+		       compat_uptr_t __user *envp);
+long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
+			     struct compat_sigaction __user *oact,
+			     size_t sigsetsize);
+long compat_sys_rt_sigqueueinfo(int pid, int sig,
+				struct compat_siginfo __user *uinfo);
+long compat_sys_rt_sigreturn(void);
+long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+			    struct compat_sigaltstack __user *uoss_ptr);
+long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high);
+long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high);
+long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count,
+			u32 dummy, u32 low, u32 high);
+long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count,
+			 u32 dummy, u32 low, u32 high);
+long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len);
+long compat_sys_sync_file_range2(int fd, unsigned int flags,
+				 u32 offset_lo, u32 offset_hi,
+				 u32 nbytes_lo, u32 nbytes_hi);
+long compat_sys_fallocate(int fd, int mode,
+			  u32 offset_lo, u32 offset_hi,
+			  u32 len_lo, u32 len_hi);
+long compat_sys_sched_rr_get_interval(compat_pid_t pid,
+				      struct compat_timespec __user *interval);
+
+/* Versions of compat functions that differ from generic Linux. */
+struct compat_msgbuf;
+long tile_compat_sys_msgsnd(int msqid,
+			    struct compat_msgbuf __user *msgp,
+			    size_t msgsz, int msgflg);
+long tile_compat_sys_msgrcv(int msqid,
+			    struct compat_msgbuf __user *msgp,
+			    size_t msgsz, long msgtyp, int msgflg);
+long tile_compat_sys_ptrace(compat_long_t request, compat_long_t pid,
+			    compat_long_t addr, compat_long_t data);
+
+/* Tilera Linux syscalls that don't have "compat" versions. */
+#define compat_sys_flush_cache sys_flush_cache
+
+#endif /* _ASM_TILE_COMPAT_H */
diff --git a/arch/tile/include/asm/cputime.h b/arch/tile/include/asm/cputime.h
new file mode 100644
index 00000000000..6d68ad7e0ea
--- /dev/null
+++ b/arch/tile/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/tile/include/asm/current.h b/arch/tile/include/asm/current.h
new file mode 100644
index 00000000000..da21acf020d
--- /dev/null
+++ b/arch/tile/include/asm/current.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_CURRENT_H
+#define _ASM_TILE_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current get_current()
+
+/* Return a usable "task_struct" pointer even if the real one is corrupt. */
+struct task_struct *validate_current(void);
+
+#endif /* _ASM_TILE_CURRENT_H */
diff --git a/arch/tile/include/asm/delay.h b/arch/tile/include/asm/delay.h
new file mode 100644
index 00000000000..97b0e69e704
--- /dev/null
+++ b/arch/tile/include/asm/delay.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_DELAY_H
+#define _ASM_TILE_DELAY_H
+
+/* Undefined functions to get compile-time errors. */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __ndelay((n) * 1000)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __ndelay(n)) : \
+	__ndelay(n))
+
+#endif /* _ASM_TILE_DELAY_H */
diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h
new file mode 100644
index 00000000000..f0a4c256403
--- /dev/null
+++ b/arch/tile/include/asm/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/arch/tile/include/asm/div64.h b/arch/tile/include/asm/div64.h
new file mode 100644
index 00000000000..6cd978cefb2
--- /dev/null
+++ b/arch/tile/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h
new file mode 100644
index 00000000000..cf466b39aa1
--- /dev/null
+++ b/arch/tile/include/asm/dma-mapping.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_DMA_MAPPING_H
+#define _ASM_TILE_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/cache.h>
+#include <linux/io.h>
+
+/*
+ * Note that on x86 and powerpc, there is a "struct dma_mapping_ops"
+ * that is used for all the DMA operations.  For now, we don't have an
+ * equivalent on tile, because we only have a single way of doing DMA.
+ * (Tilera bug 7994 to use dma_mapping_ops.)
+ */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+			  enum dma_data_direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+			     size_t size, enum dma_data_direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	       enum dma_data_direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+			 int nhwentries, enum dma_data_direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+			   size_t size, enum dma_data_direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				int nelems, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+				   int nelems, enum dma_data_direction);
+
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle);
+
+extern void dma_sync_single_for_cpu(struct device *, dma_addr_t, size_t,
+				    enum dma_data_direction);
+extern void dma_sync_single_for_device(struct device *, dma_addr_t,
+				       size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t,
+					  unsigned long offset, size_t,
+					  enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t,
+					     unsigned long offset, size_t,
+					     enum dma_data_direction);
+extern void dma_cache_sync(void *vaddr, size_t, enum dma_data_direction);
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+	return L2_CACHE_BYTES;
+}
+
+#define dma_is_consistent(d, h)	(1)
+
+
+#endif /* _ASM_TILE_DMA_MAPPING_H */
diff --git a/arch/tile/include/asm/dma.h b/arch/tile/include/asm/dma.h
new file mode 100644
index 00000000000..12a7ca16d16
--- /dev/null
+++ b/arch/tile/include/asm/dma.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_DMA_H
+#define _ASM_TILE_DMA_H
+
+#include <asm-generic/dma.h>
+
+/* Needed by drivers/pci/quirks.c */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#endif
+
+#endif /* _ASM_TILE_DMA_H */
diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h
new file mode 100644
index 00000000000..623a6bb741c
--- /dev/null
+++ b/arch/tile/include/asm/elf.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_ELF_H
+#define _ASM_TILE_ELF_H
+
+/*
+ * ELF register definitions.
+ */
+
+#include <arch/chip.h>
+
+#include <linux/ptrace.h>
+#include <asm/byteorder.h>
+#include <asm/page.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define EM_TILE64  187
+#define EM_TILEPRO 188
+#define EM_TILEGX  191
+
+/* Provide a nominal data structure. */
+#define ELF_NFPREG	0
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef __tilegx__
+#define ELF_CLASS	ELFCLASS64
+#else
+#define ELF_CLASS	ELFCLASS32
+#endif
+#define ELF_DATA	ELFDATA2LSB
+
+/*
+ * There seems to be a bug in how compat_binfmt_elf.c works: it
+ * #undefs ELF_ARCH, but it is then used in binfmt_elf.c for fill_note_info().
+ * Hack around this by providing an enum value of ELF_ARCH.
+ */
+enum { ELF_ARCH = CHIP_ELF_TYPE() };
+#define ELF_ARCH ELF_ARCH
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)  \
+	((x)->e_ident[EI_CLASS] == ELF_CLASS && \
+	 (x)->e_machine == CHIP_ELF_TYPE())
+
+/* The module loader only handles a few relocation types. */
+#ifndef __tilegx__
+#define R_TILE_32                 1
+#define R_TILE_JOFFLONG_X1       15
+#define R_TILE_IMM16_X0_LO       25
+#define R_TILE_IMM16_X1_LO       26
+#define R_TILE_IMM16_X0_HA       29
+#define R_TILE_IMM16_X1_HA       30
+#else
+#define R_TILEGX_64                       1
+#define R_TILEGX_JUMPOFF_X1              21
+#define R_TILEGX_IMM16_X0_HW0            36
+#define R_TILEGX_IMM16_X1_HW0            37
+#define R_TILEGX_IMM16_X0_HW1            38
+#define R_TILEGX_IMM16_X1_HW1            39
+#define R_TILEGX_IMM16_X0_HW2_LAST       48
+#define R_TILEGX_IMM16_X1_HW2_LAST       49
+#endif
+
+/* Use standard page size for core dumps. */
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+
+#define ELF_CORE_COPY_REGS(_dest, _regs)			\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* No additional FP registers to copy. */
+#define ELF_CORE_COPY_FPREGS(t, fpu) 0
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM  (NULL)
+
+extern void elf_plat_init(struct pt_regs *regs, unsigned long load_addr);
+
+#define ELF_PLAT_INIT(_r, load_addr) elf_plat_init(_r, load_addr)
+
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+
+/* Tilera Linux has no personalities currently, so no need to do anything. */
+#define SET_PERSONALITY(ex) do { } while (0)
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+/* Support auto-mapping of the user interrupt vectors. */
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+#ifdef CONFIG_COMPAT
+
+#define COMPAT_ELF_PLATFORM "tilegx-m32"
+
+/*
+ * "Compat" binaries have the same machine type, but 32-bit class,
+ * since they're not a separate machine type, but just a 32-bit
+ * variant of the standard 64-bit architecture.
+ */
+#define compat_elf_check_arch(x)  \
+	((x)->e_ident[EI_CLASS] == ELFCLASS32 && \
+	 (x)->e_machine == CHIP_ELF_TYPE())
+
+#define compat_start_thread(regs, ip, usp) do { \
+		regs->pc = ptr_to_compat_reg((void *)(ip)); \
+		regs->sp = ptr_to_compat_reg((void *)(usp)); \
+	} while (0)
+
+/*
+ * Use SET_PERSONALITY to indicate compatibility via TS_COMPAT.
+ */
+#undef SET_PERSONALITY
+#define SET_PERSONALITY(ex) \
+do { \
+	current->personality = PER_LINUX; \
+	current_thread_info()->status &= ~TS_COMPAT; \
+} while (0)
+#define COMPAT_SET_PERSONALITY(ex) \
+do { \
+	current->personality = PER_LINUX_32BIT; \
+	current_thread_info()->status |= TS_COMPAT; \
+} while (0)
+
+#define COMPAT_ELF_ET_DYN_BASE (0xffffffff / 3 * 2)
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* _ASM_TILE_ELF_H */
diff --git a/arch/tile/include/asm/emergency-restart.h b/arch/tile/include/asm/emergency-restart.h
new file mode 100644
index 00000000000..3711bd9d50b
--- /dev/null
+++ b/arch/tile/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/tile/include/asm/errno.h b/arch/tile/include/asm/errno.h
new file mode 100644
index 00000000000..4c82b503d92
--- /dev/null
+++ b/arch/tile/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/tile/include/asm/fcntl.h b/arch/tile/include/asm/fcntl.h
new file mode 100644
index 00000000000..46ab12db573
--- /dev/null
+++ b/arch/tile/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h
new file mode 100644
index 00000000000..51537ff9265
--- /dev/null
+++ b/arch/tile/include/asm/fixmap.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 1998 Ingo Molnar
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_FIXMAP_H
+#define _ASM_TILE_FIXMAP_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of supervisor virtual memory backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * higher than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ *
+ * We don't bother with a FIX_HOLE since above the fixmaps
+ * is unmapped memory in any case.
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_permanent_fixed_addresses,
+
+	/*
+	 * Temporary boot-time mappings, used before ioremap() is functional.
+	 * Not currently needed by the Tile architecture.
+	 */
+#define NR_FIX_BTMAPS	0
+#if NR_FIX_BTMAPS
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS - 1,
+	__end_of_fixed_addresses
+#else
+	__end_of_fixed_addresses = __end_of_permanent_fixed_addresses
+#endif
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+			 unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+		__set_fixmap(idx, 0, __pgprot(0))
+
+#define __FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define __FIXADDR_BOOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP + PAGE_SIZE - __FIXADDR_SIZE)
+#define FIXADDR_BOOT_START	(FIXADDR_TOP + PAGE_SIZE - __FIXADDR_BOOT_SIZE)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+	return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_FIXMAP_H */
diff --git a/arch/tile/include/asm/ftrace.h b/arch/tile/include/asm/ftrace.h
new file mode 100644
index 00000000000..461459b06d9
--- /dev/null
+++ b/arch/tile/include/asm/ftrace.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_FTRACE_H
+#define _ASM_TILE_FTRACE_H
+
+/* empty */
+
+#endif /* _ASM_TILE_FTRACE_H */
diff --git a/arch/tile/include/asm/futex.h b/arch/tile/include/asm/futex.h
new file mode 100644
index 00000000000..fe0d10dcae5
--- /dev/null
+++ b/arch/tile/include/asm/futex.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * These routines make two important assumptions:
+ *
+ * 1. atomic_t is really an int and can be freely cast back and forth
+ *    (validated in __init_atomic_per_cpu).
+ *
+ * 2. userspace uses sys_cmpxchg() for all atomic operations, thus using
+ *    the same locking convention that all the kernel atomic routines use.
+ */
+
+#ifndef _ASM_TILE_FUTEX_H
+#define _ASM_TILE_FUTEX_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+
+extern struct __get_user futex_set(int __user *v, int i);
+extern struct __get_user futex_add(int __user *v, int n);
+extern struct __get_user futex_or(int __user *v, int n);
+extern struct __get_user futex_andn(int __user *v, int n);
+extern struct __get_user futex_cmpxchg(int __user *v, int o, int n);
+
+#ifndef __tilegx__
+extern struct __get_user futex_xor(int __user *v, int n);
+#else
+static inline struct __get_user futex_xor(int __user *uaddr, int n)
+{
+	struct __get_user asm_ret = __get_user_4(uaddr);
+	if (!asm_ret.err) {
+		int oldval, newval;
+		do {
+			oldval = asm_ret.val;
+			newval = oldval ^ n;
+			asm_ret = futex_cmpxchg(uaddr, oldval, newval);
+		} while (asm_ret.err == 0 && oldval != asm_ret.val);
+	}
+	return asm_ret;
+}
+#endif
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int ret;
+	struct __get_user asm_ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+	switch (op) {
+	case FUTEX_OP_SET:
+		asm_ret = futex_set(uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		asm_ret = futex_add(uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		asm_ret = futex_or(uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		asm_ret = futex_andn(uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		asm_ret = futex_xor(uaddr, oparg);
+		break;
+	default:
+		asm_ret.err = -ENOSYS;
+	}
+	pagefault_enable();
+
+	ret = asm_ret.err;
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ:
+			ret = (asm_ret.val == cmparg);
+			break;
+		case FUTEX_OP_CMP_NE:
+			ret = (asm_ret.val != cmparg);
+			break;
+		case FUTEX_OP_CMP_LT:
+			ret = (asm_ret.val < cmparg);
+			break;
+		case FUTEX_OP_CMP_GE:
+			ret = (asm_ret.val >= cmparg);
+			break;
+		case FUTEX_OP_CMP_LE:
+			ret = (asm_ret.val <= cmparg);
+			break;
+		case FUTEX_OP_CMP_GT:
+			ret = (asm_ret.val > cmparg);
+			break;
+		default:
+			ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
+						int newval)
+{
+	struct __get_user asm_ret;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	asm_ret = futex_cmpxchg(uaddr, oldval, newval);
+	return asm_ret.err ? asm_ret.err : asm_ret.val;
+}
+
+#ifndef __tilegx__
+/* Return failure from the atomic wrappers. */
+struct __get_user __atomic_bad_address(int __user *addr);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_FUTEX_H */
diff --git a/arch/tile/include/asm/hardirq.h b/arch/tile/include/asm/hardirq.h
new file mode 100644
index 00000000000..822390f9a15
--- /dev/null
+++ b/arch/tile/include/asm/hardirq.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_HARDIRQ_H
+#define _ASM_TILE_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	long idle_timestamp;
+
+	/* Hard interrupt statistics. */
+	unsigned int irq_timer_count;
+	unsigned int irq_syscall_count;
+	unsigned int irq_resched_count;
+	unsigned int irq_hv_flush_count;
+	unsigned int irq_call_count;
+	unsigned int irq_hv_msg_count;
+	unsigned int irq_dev_intr_count;
+
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+#endif /* _ASM_TILE_HARDIRQ_H */
diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h
new file mode 100644
index 00000000000..0bed3ec7b42
--- /dev/null
+++ b/arch/tile/include/asm/hardwall.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Provide methods for the HARDWALL_FILE for accessing the UDN.
+ */
+
+#ifndef _ASM_TILE_HARDWALL_H
+#define _ASM_TILE_HARDWALL_H
+
+#include <linux/ioctl.h>
+
+#define HARDWALL_IOCTL_BASE 0xa2
+
+/*
+ * The HARDWALL_CREATE() ioctl is a macro with a "size" argument.
+ * The resulting ioctl value is passed to the kernel in conjunction
+ * with a pointer to a little-endian bitmask of cpus, which must be
+ * physically in a rectangular configuration on the chip.
+ * The "size" is the number of bytes of cpu mask data.
+ */
+#define _HARDWALL_CREATE 1
+#define HARDWALL_CREATE(size) \
+  _IOC(_IOC_READ, HARDWALL_IOCTL_BASE, _HARDWALL_CREATE, (size))
+
+#define _HARDWALL_ACTIVATE 2
+#define HARDWALL_ACTIVATE \
+  _IO(HARDWALL_IOCTL_BASE, _HARDWALL_ACTIVATE)
+
+#define _HARDWALL_DEACTIVATE 3
+#define HARDWALL_DEACTIVATE \
+ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE)
+
+#ifndef __KERNEL__
+
+/* This is the canonical name expected by userspace. */
+#define HARDWALL_FILE "/dev/hardwall"
+
+#else
+
+/* Hook for /proc/tile/hardwall. */
+struct seq_file;
+int proc_tile_hardwall_show(struct seq_file *sf, void *v);
+
+#endif
+
+#endif /* _ASM_TILE_HARDWALL_H */
diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h
new file mode 100644
index 00000000000..efdd12e9102
--- /dev/null
+++ b/arch/tile/include/asm/highmem.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *                   Gerhard.Wichert@pdb.siemens.de
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ */
+
+#ifndef _ASM_TILE_HIGHMEM_H
+#define _ASM_TILE_HIGHMEM_H
+
+#include <linux/interrupt.h>
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *pkmap_page_table;
+
+/*
+ * Ordering is:
+ *
+ * FIXADDR_TOP
+ *			fixed_addresses
+ * FIXADDR_START
+ *			temp fixed addresses
+ * FIXADDR_BOOT_START
+ *			Persistent kmap area
+ * PKMAP_BASE
+ * VMALLOC_END
+ *			Vmalloc area
+ * VMALLOC_START
+ * high_memory
+ */
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+void *kmap_high(struct page *page);
+void kunmap_high(struct page *page);
+void *kmap(struct page *page);
+void kunmap(struct page *page);
+void *kmap_fix_kpte(struct page *page, int finished);
+
+/* This macro is used only in map_new_virtual() to map "page". */
+#define kmap_prot page_to_kpgprot(page)
+
+void kunmap_atomic(void *kvaddr, enum km_type type);
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
+struct page *kmap_atomic_to_page(void *ptr);
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
+void *kmap_atomic(struct page *page, enum km_type type);
+void kmap_atomic_fix_kpte(struct page *page, int finished);
+
+#define flush_cache_kmaps()	do { } while (0)
+
+#endif /* _ASM_TILE_HIGHMEM_H */
diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h
new file mode 100644
index 00000000000..a8243865d49
--- /dev/null
+++ b/arch/tile/include/asm/homecache.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Handle issues around the Tile "home cache" model of coherence.
+ */
+
+#ifndef _ASM_TILE_HOMECACHE_H
+#define _ASM_TILE_HOMECACHE_H
+
+#include <asm/page.h>
+#include <linux/cpumask.h>
+
+struct page;
+struct task_struct;
+struct vm_area_struct;
+struct zone;
+
+/*
+ * Coherence point for the page is its memory controller.
+ * It is not present in any cache (L1 or L2).
+ */
+#define PAGE_HOME_UNCACHED -1
+
+/*
+ * Is this page immutable (unwritable) and thus able to be cached more
+ * widely than would otherwise be possible?  On tile64 this means we
+ * mark the PTE to cache locally; on tilepro it means we have "nc" set.
+ */
+#define PAGE_HOME_IMMUTABLE -2
+
+/*
+ * Each cpu considers its own cache to be the home for the page,
+ * which makes it incoherent.
+ */
+#define PAGE_HOME_INCOHERENT -3
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Home for the page is distributed via hash-for-home. */
+#define PAGE_HOME_HASH -4
+#endif
+
+/* Homing is unknown or unspecified.  Not valid for page_home(). */
+#define PAGE_HOME_UNKNOWN -5
+
+/* Home on the current cpu.  Not valid for page_home(). */
+#define PAGE_HOME_HERE -6
+
+/* Support wrapper to use instead of explicit hv_flush_remote(). */
+extern void flush_remote(unsigned long cache_pfn, unsigned long cache_length,
+			 const struct cpumask *cache_cpumask,
+			 HV_VirtAddr tlb_va, unsigned long tlb_length,
+			 unsigned long tlb_pgsize,
+			 const struct cpumask *tlb_cpumask,
+			 HV_Remote_ASID *asids, int asidcount);
+
+/* Set homing-related bits in a PTE (can also pass a pgprot_t). */
+extern pte_t pte_set_home(pte_t pte, int home);
+
+/* Do a cache eviction on the specified cpus. */
+extern void homecache_evict(const struct cpumask *mask);
+
+/*
+ * Change a kernel page's homecache.  It must not be mapped in user space.
+ * If !CONFIG_HOMECACHE, only usable on LOWMEM, and can only be called when
+ * no other cpu can reference the page, and causes a full-chip cache/TLB flush.
+ */
+extern void homecache_change_page_home(struct page *, int order, int home);
+
+/*
+ * Flush a page out of whatever cache(s) it is in.
+ * This is more than just finv, since it properly handles waiting
+ * for the data to reach memory on tilepro, but it can be quite
+ * heavyweight, particularly on hash-for-home memory.
+ */
+extern void homecache_flush_cache(struct page *, int order);
+
+/*
+ * Allocate a page with the given GFP flags, home, and optionally
+ * node.  These routines are actually just wrappers around the normal
+ * alloc_pages() / alloc_pages_node() functions, which set and clear
+ * a per-cpu variable to communicate with homecache_new_kernel_page().
+ * If !CONFIG_HOMECACHE, uses homecache_change_page_home().
+ */
+extern struct page *homecache_alloc_pages(gfp_t gfp_mask,
+					  unsigned int order, int home);
+extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
+					       unsigned int order, int home);
+#define homecache_alloc_page(gfp_mask, home) \
+  homecache_alloc_pages(gfp_mask, 0, home)
+
+/*
+ * These routines are just pass-throughs to free_pages() when
+ * we support full homecaching.  If !CONFIG_HOMECACHE, then these
+ * routines use homecache_change_page_home() to reset the home
+ * back to the default before returning the page to the allocator.
+ */
+void homecache_free_pages(unsigned long addr, unsigned int order);
+#define homecache_free_page(page) \
+  homecache_free_pages((page), 0)
+
+
+
+/*
+ * Report the page home for LOWMEM pages by examining their kernel PTE,
+ * or for highmem pages as the default home.
+ */
+extern int page_home(struct page *);
+
+#define homecache_migrate_kthread() do {} while (0)
+
+#define homecache_kpte_lock() 0
+#define homecache_kpte_unlock(flags) do {} while (0)
+
+
+#endif /* _ASM_TILE_HOMECACHE_H */
diff --git a/arch/tile/include/asm/hugetlb.h b/arch/tile/include/asm/hugetlb.h
new file mode 100644
index 00000000000..0521c277bbd
--- /dev/null
+++ b/arch/tile/include/asm/hugetlb.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_HUGETLB_H
+#define _ASM_TILE_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+					 unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_order(ptep, pte, HUGETLB_PAGE_ORDER);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+	ptep_clear_flush(vma, addr, ptep);
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_TILE_HUGETLB_H */
diff --git a/arch/tile/include/asm/hv_driver.h b/arch/tile/include/asm/hv_driver.h
new file mode 100644
index 00000000000..ad614de899b
--- /dev/null
+++ b/arch/tile/include/asm/hv_driver.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This header defines a wrapper interface for managing hypervisor
+ * device calls that will result in an interrupt at some later time.
+ * In particular, this provides wrappers for hv_preada() and
+ * hv_pwritea().
+ */
+
+#ifndef _ASM_TILE_HV_DRIVER_H
+#define _ASM_TILE_HV_DRIVER_H
+
+#include <hv/hypervisor.h>
+
+struct hv_driver_cb;
+
+/* A callback to be invoked when an operation completes. */
+typedef void hv_driver_callback_t(struct hv_driver_cb *cb, __hv32 result);
+
+/*
+ * A structure to hold information about an outstanding call.
+ * The driver must allocate a separate structure for each call.
+ */
+struct hv_driver_cb {
+	hv_driver_callback_t *callback;  /* Function to call on interrupt. */
+	void *dev;                       /* Driver-specific state variable. */
+};
+
+/* Wrapper for invoking hv_dev_preada(). */
+static inline int
+tile_hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len,
+		   HV_SGL sgl[/* sgl_len */], __hv64 offset,
+		   struct hv_driver_cb *callback)
+{
+	return hv_dev_preada(devhdl, flags, sgl_len, sgl,
+			     offset, (HV_IntArg)callback);
+}
+
+/* Wrapper for invoking hv_dev_pwritea(). */
+static inline int
+tile_hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len,
+		    HV_SGL sgl[/* sgl_len */], __hv64 offset,
+		    struct hv_driver_cb *callback)
+{
+	return hv_dev_pwritea(devhdl, flags, sgl_len, sgl,
+			      offset, (HV_IntArg)callback);
+}
+
+
+#endif /* _ASM_TILE_HV_DRIVER_H */
diff --git a/arch/tile/include/asm/hw_irq.h b/arch/tile/include/asm/hw_irq.h
new file mode 100644
index 00000000000..4fac5fbf333
--- /dev/null
+++ b/arch/tile/include/asm/hw_irq.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_HW_IRQ_H
+#define _ASM_TILE_HW_IRQ_H
+
+#endif /* _ASM_TILE_HW_IRQ_H */
diff --git a/arch/tile/include/asm/ide.h b/arch/tile/include/asm/ide.h
new file mode 100644
index 00000000000..3c6f2ed894c
--- /dev/null
+++ b/arch/tile/include/asm/ide.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_IDE_H
+#define _ASM_TILE_IDE_H
+
+/* For IDE on PCI */
+#define MAX_HWIFS       10
+
+#define ide_default_io_ctl(base)	(0)
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* _ASM_TILE_IDE_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
new file mode 100644
index 00000000000..8c95bef3fa4
--- /dev/null
+++ b/arch/tile/include/asm/io.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_IO_H
+#define _ASM_TILE_IO_H
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT 0xfffffffful
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access.
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer.
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
+ * long before casting it to a pointer to avoid compiler warnings.
+ */
+#if CHIP_HAS_MMIO()
+extern void __iomem *ioremap(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+	pgprot_t pgprot);
+extern void iounmap(volatile void __iomem *addr);
+#else
+#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
+#define iounmap(addr)		((void)0)
+#endif
+
+#define ioremap_nocache(physaddr, size)		ioremap(physaddr, size)
+#define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
+#define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
+
+void __iomem *ioport_map(unsigned long port, unsigned int len);
+extern inline void ioport_unmap(void __iomem *addr) {}
+
+#define mmiowb()
+
+/* Conversion between virtual and physical mappings.  */
+#define mm_ptov(addr)		((void *)phys_to_virt(addr))
+#define mm_vtop(addr)		((unsigned long)virt_to_phys(addr))
+
+#ifdef CONFIG_PCI
+
+extern u8 _tile_readb(unsigned long addr);
+extern u16 _tile_readw(unsigned long addr);
+extern u32 _tile_readl(unsigned long addr);
+extern u64 _tile_readq(unsigned long addr);
+extern void _tile_writeb(u8  val, unsigned long addr);
+extern void _tile_writew(u16 val, unsigned long addr);
+extern void _tile_writel(u32 val, unsigned long addr);
+extern void _tile_writeq(u64 val, unsigned long addr);
+
+#else
+
+/*
+ * The Tile architecture does not support IOMEM unless PCI is enabled.
+ * Unfortunately we can't yet simply not declare these methods,
+ * since some generic code that compiles into the kernel, but
+ * we never run, uses them unconditionally.
+ */
+
+static inline int iomem_panic(void)
+{
+	panic("readb/writeb and friends do not exist on tile without PCI");
+	return 0;
+}
+
+static inline u8 _tile_readb(unsigned long addr)
+{
+	return iomem_panic();
+}
+
+static inline u16 _tile_readw(unsigned long addr)
+{
+	return iomem_panic();
+}
+
+static inline u32 _tile_readl(unsigned long addr)
+{
+	return iomem_panic();
+}
+
+static inline u64 _tile_readq(unsigned long addr)
+{
+	return iomem_panic();
+}
+
+static inline void _tile_writeb(u8  val, unsigned long addr)
+{
+	iomem_panic();
+}
+
+static inline void _tile_writew(u16 val, unsigned long addr)
+{
+	iomem_panic();
+}
+
+static inline void _tile_writel(u32 val, unsigned long addr)
+{
+	iomem_panic();
+}
+
+static inline void _tile_writeq(u64 val, unsigned long addr)
+{
+	iomem_panic();
+}
+
+#endif
+
+#define readb(addr) _tile_readb((unsigned long)addr)
+#define readw(addr) _tile_readw((unsigned long)addr)
+#define readl(addr) _tile_readl((unsigned long)addr)
+#define readq(addr) _tile_readq((unsigned long)addr)
+#define writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
+#define writew(val, addr) _tile_writew(val, (unsigned long)addr)
+#define writel(val, addr) _tile_writel(val, (unsigned long)addr)
+#define writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_readq readq
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define __raw_writeq writeq
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+#define readq_relaxed readq
+
+#define ioread8 readb
+#define ioread16 readw
+#define ioread32 readl
+#define ioread64 readq
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+#define iowrite64 writeq
+
+static inline void *memcpy_fromio(void *dst, void *src, int len)
+{
+	int x;
+	BUG_ON((unsigned long)src & 0x3);
+	for (x = 0; x < len; x += 4)
+		*(u32 *)(dst + x) = readl(src + x);
+	return dst;
+}
+
+static inline void *memcpy_toio(void *dst, void *src, int len)
+{
+	int x;
+	BUG_ON((unsigned long)dst & 0x3);
+	for (x = 0; x < len; x += 4)
+		writel(*(u32 *)(src + x), dst + x);
+	return dst;
+}
+
+/*
+ * The Tile architecture does not support IOPORT, even with PCI.
+ * Unfortunately we can't yet simply not declare these methods,
+ * since some generic code that compiles into the kernel, but
+ * we never run, uses them unconditionally.
+ */
+
+static inline int ioport_panic(void)
+{
+	panic("inb/outb and friends do not exist on tile");
+	return 0;
+}
+
+static inline u8 inb(unsigned long addr)
+{
+	return ioport_panic();
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return ioport_panic();
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return ioport_panic();
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	ioport_panic();
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	ioport_panic();
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	ioport_panic();
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	ioport_panic();
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	ioport_panic();
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	ioport_panic();
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	ioport_panic();
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	ioport_panic();
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	ioport_panic();
+}
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+
+#endif /* _ASM_TILE_IO_H */
diff --git a/arch/tile/include/asm/ioctl.h b/arch/tile/include/asm/ioctl.h
new file mode 100644
index 00000000000..b279fe06dfe
--- /dev/null
+++ b/arch/tile/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/tile/include/asm/ioctls.h b/arch/tile/include/asm/ioctls.h
new file mode 100644
index 00000000000..ec34c760665
--- /dev/null
+++ b/arch/tile/include/asm/ioctls.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctls.h>
diff --git a/arch/tile/include/asm/ipc.h b/arch/tile/include/asm/ipc.h
new file mode 100644
index 00000000000..a46e3d9c2a3
--- /dev/null
+++ b/arch/tile/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/tile/include/asm/ipcbuf.h b/arch/tile/include/asm/ipcbuf.h
new file mode 100644
index 00000000000..84c7e51cb6d
--- /dev/null
+++ b/arch/tile/include/asm/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h
new file mode 100644
index 00000000000..572fd3ef1d7
--- /dev/null
+++ b/arch/tile/include/asm/irq.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_IRQ_H
+#define _ASM_TILE_IRQ_H
+
+#include <linux/hardirq.h>
+
+/* The hypervisor interface provides 32 IRQs. */
+#define NR_IRQS 32
+
+/* IRQ numbers used for linux IPIs. */
+#define IRQ_RESCHEDULE 1
+
+void ack_bad_irq(unsigned int irq);
+
+/*
+ * Different ways of handling interrupts.  Tile interrupts are always
+ * per-cpu; there is no global interrupt controller to implement
+ * enable/disable.  Most onboard devices can send their interrupts to
+ * many tiles at the same time, and Tile-specific drivers know how to
+ * deal with this.
+ *
+ * However, generic devices (usually PCIE based, sometimes GPIO)
+ * expect that interrupts will fire on a single core at a time and
+ * that the irq can be enabled or disabled from any core at any time.
+ * We implement this by directing such interrupts to a single core.
+ *
+ * One added wrinkle is that PCI interrupts can be either
+ * hardware-cleared (legacy interrupts) or software cleared (MSI).
+ * Other generic device systems (GPIO) are always software-cleared.
+ *
+ * The enums below are used by drivers for onboard devices, including
+ * the internals of PCI root complex and GPIO.  They allow the driver
+ * to tell the generic irq code what kind of interrupt is mapped to a
+ * particular IRQ number.
+ */
+enum {
+	/* per-cpu interrupt; use enable/disable_percpu_irq() to mask */
+	TILE_IRQ_PERCPU,
+	/* global interrupt, hardware responsible for clearing. */
+	TILE_IRQ_HW_CLEAR,
+	/* global interrupt, software responsible for clearing. */
+	TILE_IRQ_SW_CLEAR,
+};
+
+
+/*
+ * Paravirtualized drivers should call this when they dynamically
+ * allocate a new IRQ or discover an IRQ that was pre-allocated by the
+ * hypervisor for use with their particular device.  This gives the
+ * IRQ subsystem an opportunity to do interrupt-type-specific
+ * initialization.
+ *
+ * ISSUE: We should modify this API so that registering anything
+ * except percpu interrupts also requires providing callback methods
+ * for enabling and disabling the interrupt.  This would allow the
+ * generic IRQ code to proxy enable/disable_irq() calls back into the
+ * PCI subsystem, which in turn could enable or disable the interrupt
+ * at the PCI shim.
+ */
+void tile_irq_activate(unsigned int irq, int tile_irq_type);
+
+/*
+ * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know
+ * how to use enable/disable_percpu_irq() to manage interrupts on each
+ * core.  We can't use the generic enable/disable_irq() because they
+ * use a single reference count per irq, rather than per cpu per irq.
+ */
+void enable_percpu_irq(unsigned int irq);
+void disable_percpu_irq(unsigned int irq);
+
+
+void setup_irq_regs(void);
+
+#endif /* _ASM_TILE_IRQ_H */
diff --git a/arch/tile/include/asm/irq_regs.h b/arch/tile/include/asm/irq_regs.h
new file mode 100644
index 00000000000..3dd9c0b7027
--- /dev/null
+++ b/arch/tile/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
new file mode 100644
index 00000000000..45cf67c2f28
--- /dev/null
+++ b/arch/tile/include/asm/irqflags.h
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_IRQFLAGS_H
+#define _ASM_TILE_IRQFLAGS_H
+
+#include <arch/interrupts.h>
+#include <arch/chip.h>
+
+/*
+ * The set of interrupts we want to allow when interrupts are nominally
+ * disabled.  The remainder are effectively "NMI" interrupts from
+ * the point of view of the generic Linux code.  Note that synchronous
+ * interrupts (aka "non-queued") are not blocked by the mask in any case.
+ */
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+#define LINUX_MASKABLE_INTERRUPTS \
+	(~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT)))
+#else
+#define LINUX_MASKABLE_INTERRUPTS \
+	(~(INT_MASK(INT_PERF_COUNT)))
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */
+#include <asm/percpu.h>
+#include <arch/spr_def.h>
+
+/* Set and clear kernel interrupt masks. */
+#if CHIP_HAS_SPLIT_INTR_MASK()
+#if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 || INT_MEM_ERROR >= 32
+# error Fix assumptions about which word various interrupts are in
+#endif
+#define interrupt_mask_set(n) do { \
+	int __n = (n); \
+	int __mask = 1 << (__n & 0x1f); \
+	if (__n < 32) \
+		__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, __mask); \
+	else \
+		__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, __mask); \
+} while (0)
+#define interrupt_mask_reset(n) do { \
+	int __n = (n); \
+	int __mask = 1 << (__n & 0x1f); \
+	if (__n < 32) \
+		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, __mask); \
+	else \
+		__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, __mask); \
+} while (0)
+#define interrupt_mask_check(n) ({ \
+	int __n = (n); \
+	(((__n < 32) ? \
+	 __insn_mfspr(SPR_INTERRUPT_MASK_1_0) : \
+	 __insn_mfspr(SPR_INTERRUPT_MASK_1_1)) \
+	  >> (__n & 0x1f)) & 1; \
+})
+#define interrupt_mask_set_mask(mask) do { \
+	unsigned long long __m = (mask); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, (unsigned long)(__m)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, (unsigned long)(__m>>32)); \
+} while (0)
+#define interrupt_mask_reset_mask(mask) do { \
+	unsigned long long __m = (mask); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, (unsigned long)(__m)); \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, (unsigned long)(__m>>32)); \
+} while (0)
+#else
+#define interrupt_mask_set(n) \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (1UL << (n)))
+#define interrupt_mask_reset(n) \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (1UL << (n)))
+#define interrupt_mask_check(n) \
+	((__insn_mfspr(SPR_INTERRUPT_MASK_1) >> (n)) & 1)
+#define interrupt_mask_set_mask(mask) \
+	__insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (mask))
+#define interrupt_mask_reset_mask(mask) \
+	__insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (mask))
+#endif
+
+/*
+ * The set of interrupts we want active if irqs are enabled.
+ * Note that in particular, the tile timer interrupt comes and goes
+ * from this set, since we have no other way to turn off the timer.
+ * Likewise, INTCTRL_1 is removed and re-added during device
+ * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * We use a low bit (MEM_ERROR) as our sentinel value and make sure it
+ * is always claimed as an "active interrupt" so we can query that bit
+ * to know our current state.
+ */
+DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
+#define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)
+
+/* Disable interrupts. */
+#define raw_local_irq_disable() \
+	interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS)
+
+/* Disable all interrupts, including NMIs. */
+#define raw_local_irq_disable_all() \
+	interrupt_mask_set_mask(-1UL)
+
+/* Re-enable all maskable interrupts. */
+#define raw_local_irq_enable() \
+	interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask))
+
+/* Disable or enable interrupts based on flag argument. */
+#define raw_local_irq_restore(disabled) do { \
+	if (disabled) \
+		raw_local_irq_disable(); \
+	else \
+		raw_local_irq_enable(); \
+} while (0)
+
+/* Return true if "flags" argument means interrupts are disabled. */
+#define raw_irqs_disabled_flags(flags) ((flags) != 0)
+
+/* Return true if interrupts are currently disabled. */
+#define raw_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR)
+
+/* Save whether interrupts are currently disabled. */
+#define raw_local_save_flags(flags) ((flags) = raw_irqs_disabled())
+
+/* Save whether interrupts are currently disabled, then disable them. */
+#define raw_local_irq_save(flags) \
+	do { raw_local_save_flags(flags); raw_local_irq_disable(); } while (0)
+
+/* Prevent the given interrupt from being enabled next time we enable irqs. */
+#define raw_local_irq_mask(interrupt) \
+	(__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))
+
+/* Prevent the given interrupt from being enabled immediately. */
+#define raw_local_irq_mask_now(interrupt) do { \
+	raw_local_irq_mask(interrupt); \
+	interrupt_mask_set(interrupt); \
+} while (0)
+
+/* Allow the given interrupt to be enabled next time we enable irqs. */
+#define raw_local_irq_unmask(interrupt) \
+	(__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt))
+
+/* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
+#define raw_local_irq_unmask_now(interrupt) do { \
+	raw_local_irq_unmask(interrupt); \
+	if (!irqs_disabled()) \
+		interrupt_mask_reset(interrupt); \
+} while (0)
+
+#else /* __ASSEMBLY__ */
+
+/* We provide a somewhat more restricted set for assembly. */
+
+#ifdef __tilegx__
+
+#if INT_MEM_ERROR != 0
+# error Fix IRQ_DISABLED() macro
+#endif
+
+/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
+#define IRQS_DISABLED(tmp)					\
+	mfspr   tmp, INTERRUPT_MASK_1;				\
+	andi    tmp, tmp, 1
+
+/* Load up a pointer to &interrupts_enabled_mask. */
+#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
+	moveli reg, hw2_last(interrupts_enabled_mask); \
+	shl16insli reg, reg, hw1(interrupts_enabled_mask); \
+	shl16insli reg, reg, hw0(interrupts_enabled_mask); \
+	add     reg, reg, tp
+
+/* Disable interrupts. */
+#define IRQ_DISABLE(tmp0, tmp1)					\
+	moveli  tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS);	\
+	shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS);	\
+	shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS);	\
+	mtspr   INTERRUPT_MASK_SET_1, tmp0
+
+/* Disable ALL synchronous interrupts (used by NMI entry). */
+#define IRQ_DISABLE_ALL(tmp)					\
+	movei   tmp, -1;					\
+	mtspr   INTERRUPT_MASK_SET_1, tmp
+
+/* Enable interrupts. */
+#define IRQ_ENABLE(tmp0, tmp1)					\
+	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0);			\
+	ld      tmp0, tmp0;					\
+	mtspr   INTERRUPT_MASK_RESET_1, tmp0
+
+#else /* !__tilegx__ */
+
+/*
+ * Return 0 or 1 to indicate whether interrupts are currently disabled.
+ * Note that it's important that we use a bit from the "low" mask word,
+ * since when we are enabling, that is the word we write first, so if we
+ * are interrupted after only writing half of the mask, the interrupt
+ * handler will correctly observe that we have interrupts enabled, and
+ * will enable interrupts itself on return from the interrupt handler
+ * (making the original code's write of the "high" mask word idempotent).
+ */
+#define IRQS_DISABLED(tmp)					\
+	mfspr   tmp, INTERRUPT_MASK_1_0;			\
+	shri    tmp, tmp, INT_MEM_ERROR;			\
+	andi    tmp, tmp, 1
+
+/* Load up a pointer to &interrupts_enabled_mask. */
+#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg)			\
+	moveli  reg, lo16(interrupts_enabled_mask);	\
+	auli    reg, reg, ha16(interrupts_enabled_mask);\
+	add     reg, reg, tp
+
+/* Disable interrupts. */
+#define IRQ_DISABLE(tmp0, tmp1)					\
+	{							\
+	 movei  tmp0, -1;					\
+	 moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS)		\
+	};							\
+	{							\
+	 mtspr  INTERRUPT_MASK_SET_1_0, tmp0;			\
+	 auli   tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS)	\
+	};							\
+	mtspr   INTERRUPT_MASK_SET_1_1, tmp1
+
+/* Disable ALL synchronous interrupts (used by NMI entry). */
+#define IRQ_DISABLE_ALL(tmp)					\
+	movei   tmp, -1;					\
+	mtspr   INTERRUPT_MASK_SET_1_0, tmp;			\
+	mtspr   INTERRUPT_MASK_SET_1_1, tmp
+
+/* Enable interrupts. */
+#define IRQ_ENABLE(tmp0, tmp1)					\
+	GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0);			\
+	{							\
+	 lw     tmp0, tmp0;					\
+	 addi   tmp1, tmp0, 4					\
+	};							\
+	lw      tmp1, tmp1;					\
+	mtspr   INTERRUPT_MASK_RESET_1_0, tmp0;			\
+	mtspr   INTERRUPT_MASK_RESET_1_1, tmp1
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code. We call a
+ * C function, but almost everywhere we do, we don't mind clobbering
+ * all the caller-saved registers.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON  jal trace_hardirqs_on
+# define TRACE_IRQS_OFF jal trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_TILE_IRQFLAGS_H */
diff --git a/arch/tile/include/asm/kdebug.h b/arch/tile/include/asm/kdebug.h
new file mode 100644
index 00000000000..6ece1b03766
--- /dev/null
+++ b/arch/tile/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/tile/include/asm/kexec.h b/arch/tile/include/asm/kexec.h
new file mode 100644
index 00000000000..c11a6cc73bb
--- /dev/null
+++ b/arch/tile/include/asm/kexec.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * based on kexec.h from other architectures in linux-2.6.18
+ */
+
+#ifndef _ASM_TILE_KEXEC_H
+#define _ASM_TILE_KEXEC_H
+
+#include <asm/page.h>
+
+/* Maximum physical address we can use pages from. */
+#define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE
+/* Maximum address we can reach in physical address mode. */
+#define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE
+/* Maximum address we can use for the control code buffer. */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE	PAGE_SIZE
+
+/*
+ * We don't bother to provide a unique identifier, since we can only
+ * reboot with a single type of kernel image anyway.
+ */
+#define KEXEC_ARCH KEXEC_ARCH_DEFAULT
+
+/* Use the tile override for the page allocator. */
+struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order);
+#define kimage_alloc_pages_arch kimage_alloc_pages_arch
+
+#define MAX_NOTE_BYTES 1024
+
+/* Defined in arch/tile/kernel/relocate_kernel.S */
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned long relocate_new_kernel_size;
+extern void relocate_new_kernel_end(void);
+
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *n, struct pt_regs *o)
+{
+}
+
+#endif /* _ASM_TILE_KEXEC_H */
diff --git a/arch/tile/include/asm/kmap_types.h b/arch/tile/include/asm/kmap_types.h
new file mode 100644
index 00000000000..1480106d1c0
--- /dev/null
+++ b/arch/tile/include/asm/kmap_types.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_KMAP_TYPES_H
+#define _ASM_TILE_KMAP_TYPES_H
+
+/*
+ * In TILE Linux each set of four of these uses another 16MB chunk of
+ * address space, given 64 tiles and 64KB pages, so we only enable
+ * ones that are required by the kernel configuration.
+ */
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_MEMCPY0,
+	KM_MEMCPY1,
+#if defined(CONFIG_HIGHPTE)
+	KM_PTE0,
+	KM_PTE1,
+#endif
+	KM_TYPE_NR
+};
+
+#endif /* _ASM_TILE_KMAP_TYPES_H */
diff --git a/arch/tile/include/asm/linkage.h b/arch/tile/include/asm/linkage.h
new file mode 100644
index 00000000000..e121c39751a
--- /dev/null
+++ b/arch/tile/include/asm/linkage.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_LINKAGE_H
+#define _ASM_TILE_LINKAGE_H
+
+#include <feedback.h>
+
+#define __ALIGN .align 8
+
+/*
+ * The STD_ENTRY and STD_ENDPROC macros put the function in a
+ * self-named .text.foo section, and if linker feedback collection
+ * is enabled, add a suitable call to the feedback collection code.
+ * STD_ENTRY_SECTION lets you specify a non-standard section name.
+ */
+
+#define STD_ENTRY(name) \
+  .pushsection .text.##name, "ax"; \
+  ENTRY(name); \
+  FEEDBACK_ENTER(name)
+
+#define STD_ENTRY_SECTION(name, section) \
+  .pushsection section, "ax"; \
+  ENTRY(name); \
+  FEEDBACK_ENTER_EXPLICIT(name, section, .Lend_##name - name)
+
+#define STD_ENDPROC(name) \
+  ENDPROC(name); \
+  .Lend_##name:; \
+  .popsection
+
+/* Create a file-static function entry set up for feedback gathering. */
+#define STD_ENTRY_LOCAL(name) \
+  .pushsection .text.##name, "ax"; \
+  ALIGN; \
+  name:; \
+  FEEDBACK_ENTER(name)
+
+#endif /* _ASM_TILE_LINKAGE_H */
diff --git a/arch/tile/include/asm/local.h b/arch/tile/include/asm/local.h
new file mode 100644
index 00000000000..c11c530f74d
--- /dev/null
+++ b/arch/tile/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/tile/include/asm/memprof.h b/arch/tile/include/asm/memprof.h
new file mode 100644
index 00000000000..359949be28c
--- /dev/null
+++ b/arch/tile/include/asm/memprof.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * The hypervisor's memory controller profiling infrastructure allows
+ * the programmer to find out what fraction of the available memory
+ * bandwidth is being consumed at each memory controller.  The
+ * profiler provides start, stop, and clear operations to allows
+ * profiling over a specific time window, as well as an interface for
+ * reading the most recent profile values.
+ *
+ * This header declares IOCTL codes necessary to control memprof.
+ */
+#ifndef _ASM_TILE_MEMPROF_H
+#define _ASM_TILE_MEMPROF_H
+
+#include <linux/ioctl.h>
+
+#define MEMPROF_IOCTL_TYPE 0xB4
+#define MEMPROF_IOCTL_START _IO(MEMPROF_IOCTL_TYPE, 0)
+#define MEMPROF_IOCTL_STOP _IO(MEMPROF_IOCTL_TYPE, 1)
+#define MEMPROF_IOCTL_CLEAR _IO(MEMPROF_IOCTL_TYPE, 2)
+
+#endif /* _ASM_TILE_MEMPROF_H */
diff --git a/arch/tile/include/asm/mman.h b/arch/tile/include/asm/mman.h
new file mode 100644
index 00000000000..4c6811e3e8d
--- /dev/null
+++ b/arch/tile/include/asm/mman.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_MMAN_H
+#define _ASM_TILE_MMAN_H
+
+#include <asm-generic/mman-common.h>
+#include <arch/chip.h>
+
+/* Standard Linux flags */
+
+#define MAP_POPULATE	0x0040		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x0080		/* do not block on IO */
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_LOCKED	0x0200		/* pages are locked */
+#define MAP_NORESERVE	0x0400		/* don't check for reservations */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_HUGETLB	0x4000		/* create a huge page mapping */
+
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+
+#endif /* _ASM_TILE_MMAN_H */
diff --git a/arch/tile/include/asm/mmu.h b/arch/tile/include/asm/mmu.h
new file mode 100644
index 00000000000..92f94c77b6e
--- /dev/null
+++ b/arch/tile/include/asm/mmu.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_MMU_H
+#define _ASM_TILE_MMU_H
+
+/* Capture any arch- and mm-specific information. */
+struct mm_context {
+	/*
+	 * Written under the mmap_sem semaphore; read without the
+	 * semaphore but atomically, but it is conservatively set.
+	 */
+	unsigned int priority_cached;
+};
+
+typedef struct mm_context mm_context_t;
+
+void leave_mm(int cpu);
+
+#endif /* _ASM_TILE_MMU_H */
diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h
new file mode 100644
index 00000000000..9bc0d0725c2
--- /dev/null
+++ b/arch/tile/include/asm/mmu_context.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_MMU_CONTEXT_H
+#define _ASM_TILE_MMU_CONTEXT_H
+
+#include <linux/smp.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	return 0;
+}
+
+/* Note that arch/tile/kernel/head.S also calls hv_install_context() */
+static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
+{
+	/* FIXME: DIRECTIO should not always be set. FIXME. */
+	int rc = hv_install_context(__pa(pgdir), prot, asid, HV_CTX_DIRECTIO);
+	if (rc < 0)
+		panic("hv_install_context failed: %d", rc);
+}
+
+static inline void install_page_table(pgd_t *pgdir, int asid)
+{
+	pte_t *ptep = virt_to_pte(NULL, (unsigned long)pgdir);
+	__install_page_table(pgdir, asid, *ptep);
+}
+
+/*
+ * "Lazy" TLB mode is entered when we are switching to a kernel task,
+ * which borrows the mm of the previous task.  The goal of this
+ * optimization is to avoid having to install a new page table.  On
+ * early x86 machines (where the concept originated) you couldn't do
+ * anything short of a full page table install for invalidation, so
+ * handling a remote TLB invalidate required doing a page table
+ * re-install.  Someone clearly decided that it was silly to keep
+ * doing this while in "lazy" TLB mode, so the optimization involves
+ * installing the swapper page table instead the first time one
+ * occurs, and clearing the cpu out of cpu_vm_mask, so the cpu running
+ * the kernel task doesn't need to take any more interrupts.  At that
+ * point it's then necessary to explicitly reinstall it when context
+ * switching back to the original mm.
+ *
+ * On Tile, we have to do a page-table install whenever DMA is enabled,
+ * so in that case lazy mode doesn't help anyway.  And more generally,
+ * we have efficient per-page TLB shootdown, and don't expect to spend
+ * that much time in kernel tasks in general, so just leaving the
+ * kernel task borrowing the old page table, but handling TLB
+ * shootdowns, is a reasonable thing to do.  And importantly, this
+ * lets us use the hypervisor's internal APIs for TLB shootdown, which
+ * means we don't have to worry about having TLB shootdowns blocked
+ * when Linux is disabling interrupts; see the page migration code for
+ * an example of where it's important for TLB shootdowns to complete
+ * even when interrupts are disabled at the Linux level.
+ */
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *t)
+{
+#if CHIP_HAS_TILE_DMA()
+	/*
+	 * We have to do an "identity" page table switch in order to
+	 * clear any pending DMA interrupts.
+	 */
+	if (current->thread.tile_dma_state.enabled)
+		install_page_table(mm->pgd, __get_cpu_var(current_asid));
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (likely(prev != next)) {
+
+		int cpu = smp_processor_id();
+
+		/* Pick new ASID. */
+		int asid = __get_cpu_var(current_asid) + 1;
+		if (asid > max_asid) {
+			asid = min_asid;
+			local_flush_tlb();
+		}
+		__get_cpu_var(current_asid) = asid;
+
+		/* Clear cpu from the old mm, and set it in the new one. */
+		cpumask_clear_cpu(cpu, &prev->cpu_vm_mask);
+		cpumask_set_cpu(cpu, &next->cpu_vm_mask);
+
+		/* Re-load page tables */
+		install_page_table(next->pgd, asid);
+
+		/* See how we should set the red/black cache info */
+		check_mm_caching(prev, next);
+
+		/*
+		 * Since we're changing to a new mm, we have to flush
+		 * the icache in case some physical page now being mapped
+		 * has subsequently been repurposed and has new code.
+		 */
+		__flush_icache();
+
+	}
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+			       struct mm_struct *next_mm)
+{
+	switch_mm(prev_mm, next_mm, NULL);
+}
+
+#define destroy_context(mm)		do { } while (0)
+#define deactivate_mm(tsk, mm)          do { } while (0)
+
+#endif /* _ASM_TILE_MMU_CONTEXT_H */
diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h
new file mode 100644
index 00000000000..c6344c4f32a
--- /dev/null
+++ b/arch/tile/include/asm/mmzone.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_MMZONE_H
+#define _ASM_TILE_MMZONE_H
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid)	(&node_data[nid])
+
+extern void get_memcfg_numa(void);
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#include <asm/page.h>
+
+/*
+ * Generally, memory ranges are always doled out by the hypervisor in
+ * fixed-size, power-of-two increments.  That would make computing the node
+ * very easy.  We could just take a couple high bits of the PA, which
+ * denote the memory shim, and we'd be done.  However, when we're doing
+ * memory striping, this may not be true; PAs with different high bit
+ * values might be in the same node.  Thus, we keep a lookup table to
+ * translate the high bits of the PFN to the node number.
+ */
+extern int highbits_to_node[];
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	return highbits_to_node[__pfn_to_highbits(pfn)];
+}
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)						\
+({									\
+	pg_data_t *__pgdat = NODE_DATA(nid);				\
+	__pgdat->node_start_pfn + __pgdat->node_spanned_pages;		\
+})
+
+#define kern_addr_valid(kaddr)	virt_addr_valid((void *)kaddr)
+
+static inline int pfn_valid(int pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	if (nid >= 0)
+		return (pfn < node_end_pfn(nid));
+	return 0;
+}
+
+/* Information on the NUMA nodes that we compute early */
+extern unsigned long node_start_pfn[];
+extern unsigned long node_end_pfn[];
+extern unsigned long node_memmap_pfn[];
+extern unsigned long node_percpu_pfn[];
+extern unsigned long node_free_pfn[];
+#ifdef CONFIG_HIGHMEM
+extern unsigned long node_lowmem_end_pfn[];
+#endif
+#ifdef CONFIG_PCI
+extern unsigned long pci_reserve_start_pfn;
+extern unsigned long pci_reserve_end_pfn;
+#endif
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_TILE_MMZONE_H */
diff --git a/arch/tile/include/asm/module.h b/arch/tile/include/asm/module.h
new file mode 100644
index 00000000000..1e4b79fe858
--- /dev/null
+++ b/arch/tile/include/asm/module.h
@@ -0,0 +1 @@
+#include <asm-generic/module.h>
diff --git a/arch/tile/include/asm/msgbuf.h b/arch/tile/include/asm/msgbuf.h
new file mode 100644
index 00000000000..809134c644a
--- /dev/null
+++ b/arch/tile/include/asm/msgbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/msgbuf.h>
diff --git a/arch/tile/include/asm/mutex.h b/arch/tile/include/asm/mutex.h
new file mode 100644
index 00000000000..ff6101aa2c7
--- /dev/null
+++ b/arch/tile/include/asm/mutex.h
@@ -0,0 +1 @@
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/tile/include/asm/opcode-tile.h b/arch/tile/include/asm/opcode-tile.h
new file mode 100644
index 00000000000..ba38959137d
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_OPCODE_TILE_H
+#define _ASM_TILE_OPCODE_TILE_H
+
+#include <arch/chip.h>
+
+#if CHIP_WORD_SIZE() == 64
+#include <asm/opcode-tile_64.h>
+#else
+#include <asm/opcode-tile_32.h>
+#endif
+
+/* These definitions are not correct for TILE64, so just avoid them. */
+#undef TILE_ELF_MACHINE_CODE
+#undef TILE_ELF_NAME
+
+#endif /* _ASM_TILE_OPCODE_TILE_H */
diff --git a/arch/tile/include/asm/opcode-tile_32.h b/arch/tile/include/asm/opcode-tile_32.h
new file mode 100644
index 00000000000..eda60ecbae3
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile_32.h
@@ -0,0 +1,1506 @@
+/* tile.h -- Header file for TILE opcode table
+   Copyright (C) 2005 Free Software Foundation, Inc.
+   Contributed by Tilera Corp. */
+
+#ifndef opcode_tile_h
+#define opcode_tile_h
+
+typedef unsigned long long tile_bundle_bits;
+
+
+enum
+{
+  TILE_MAX_OPERANDS = 5 /* mm */
+};
+
+typedef enum
+{
+  TILE_OPC_BPT,
+  TILE_OPC_INFO,
+  TILE_OPC_INFOL,
+  TILE_OPC_J,
+  TILE_OPC_JAL,
+  TILE_OPC_MOVE,
+  TILE_OPC_MOVE_SN,
+  TILE_OPC_MOVEI,
+  TILE_OPC_MOVEI_SN,
+  TILE_OPC_MOVELI,
+  TILE_OPC_MOVELI_SN,
+  TILE_OPC_MOVELIS,
+  TILE_OPC_PREFETCH,
+  TILE_OPC_RAISE,
+  TILE_OPC_ADD,
+  TILE_OPC_ADD_SN,
+  TILE_OPC_ADDB,
+  TILE_OPC_ADDB_SN,
+  TILE_OPC_ADDBS_U,
+  TILE_OPC_ADDBS_U_SN,
+  TILE_OPC_ADDH,
+  TILE_OPC_ADDH_SN,
+  TILE_OPC_ADDHS,
+  TILE_OPC_ADDHS_SN,
+  TILE_OPC_ADDI,
+  TILE_OPC_ADDI_SN,
+  TILE_OPC_ADDIB,
+  TILE_OPC_ADDIB_SN,
+  TILE_OPC_ADDIH,
+  TILE_OPC_ADDIH_SN,
+  TILE_OPC_ADDLI,
+  TILE_OPC_ADDLI_SN,
+  TILE_OPC_ADDLIS,
+  TILE_OPC_ADDS,
+  TILE_OPC_ADDS_SN,
+  TILE_OPC_ADIFFB_U,
+  TILE_OPC_ADIFFB_U_SN,
+  TILE_OPC_ADIFFH,
+  TILE_OPC_ADIFFH_SN,
+  TILE_OPC_AND,
+  TILE_OPC_AND_SN,
+  TILE_OPC_ANDI,
+  TILE_OPC_ANDI_SN,
+  TILE_OPC_AULI,
+  TILE_OPC_AVGB_U,
+  TILE_OPC_AVGB_U_SN,
+  TILE_OPC_AVGH,
+  TILE_OPC_AVGH_SN,
+  TILE_OPC_BBNS,
+  TILE_OPC_BBNS_SN,
+  TILE_OPC_BBNST,
+  TILE_OPC_BBNST_SN,
+  TILE_OPC_BBS,
+  TILE_OPC_BBS_SN,
+  TILE_OPC_BBST,
+  TILE_OPC_BBST_SN,
+  TILE_OPC_BGEZ,
+  TILE_OPC_BGEZ_SN,
+  TILE_OPC_BGEZT,
+  TILE_OPC_BGEZT_SN,
+  TILE_OPC_BGZ,
+  TILE_OPC_BGZ_SN,
+  TILE_OPC_BGZT,
+  TILE_OPC_BGZT_SN,
+  TILE_OPC_BITX,
+  TILE_OPC_BITX_SN,
+  TILE_OPC_BLEZ,
+  TILE_OPC_BLEZ_SN,
+  TILE_OPC_BLEZT,
+  TILE_OPC_BLEZT_SN,
+  TILE_OPC_BLZ,
+  TILE_OPC_BLZ_SN,
+  TILE_OPC_BLZT,
+  TILE_OPC_BLZT_SN,
+  TILE_OPC_BNZ,
+  TILE_OPC_BNZ_SN,
+  TILE_OPC_BNZT,
+  TILE_OPC_BNZT_SN,
+  TILE_OPC_BYTEX,
+  TILE_OPC_BYTEX_SN,
+  TILE_OPC_BZ,
+  TILE_OPC_BZ_SN,
+  TILE_OPC_BZT,
+  TILE_OPC_BZT_SN,
+  TILE_OPC_CLZ,
+  TILE_OPC_CLZ_SN,
+  TILE_OPC_CRC32_32,
+  TILE_OPC_CRC32_32_SN,
+  TILE_OPC_CRC32_8,
+  TILE_OPC_CRC32_8_SN,
+  TILE_OPC_CTZ,
+  TILE_OPC_CTZ_SN,
+  TILE_OPC_DRAIN,
+  TILE_OPC_DTLBPR,
+  TILE_OPC_DWORD_ALIGN,
+  TILE_OPC_DWORD_ALIGN_SN,
+  TILE_OPC_FINV,
+  TILE_OPC_FLUSH,
+  TILE_OPC_FNOP,
+  TILE_OPC_ICOH,
+  TILE_OPC_ILL,
+  TILE_OPC_INTHB,
+  TILE_OPC_INTHB_SN,
+  TILE_OPC_INTHH,
+  TILE_OPC_INTHH_SN,
+  TILE_OPC_INTLB,
+  TILE_OPC_INTLB_SN,
+  TILE_OPC_INTLH,
+  TILE_OPC_INTLH_SN,
+  TILE_OPC_INV,
+  TILE_OPC_IRET,
+  TILE_OPC_JALB,
+  TILE_OPC_JALF,
+  TILE_OPC_JALR,
+  TILE_OPC_JALRP,
+  TILE_OPC_JB,
+  TILE_OPC_JF,
+  TILE_OPC_JR,
+  TILE_OPC_JRP,
+  TILE_OPC_LB,
+  TILE_OPC_LB_SN,
+  TILE_OPC_LB_U,
+  TILE_OPC_LB_U_SN,
+  TILE_OPC_LBADD,
+  TILE_OPC_LBADD_SN,
+  TILE_OPC_LBADD_U,
+  TILE_OPC_LBADD_U_SN,
+  TILE_OPC_LH,
+  TILE_OPC_LH_SN,
+  TILE_OPC_LH_U,
+  TILE_OPC_LH_U_SN,
+  TILE_OPC_LHADD,
+  TILE_OPC_LHADD_SN,
+  TILE_OPC_LHADD_U,
+  TILE_OPC_LHADD_U_SN,
+  TILE_OPC_LNK,
+  TILE_OPC_LNK_SN,
+  TILE_OPC_LW,
+  TILE_OPC_LW_SN,
+  TILE_OPC_LW_NA,
+  TILE_OPC_LW_NA_SN,
+  TILE_OPC_LWADD,
+  TILE_OPC_LWADD_SN,
+  TILE_OPC_LWADD_NA,
+  TILE_OPC_LWADD_NA_SN,
+  TILE_OPC_MAXB_U,
+  TILE_OPC_MAXB_U_SN,
+  TILE_OPC_MAXH,
+  TILE_OPC_MAXH_SN,
+  TILE_OPC_MAXIB_U,
+  TILE_OPC_MAXIB_U_SN,
+  TILE_OPC_MAXIH,
+  TILE_OPC_MAXIH_SN,
+  TILE_OPC_MF,
+  TILE_OPC_MFSPR,
+  TILE_OPC_MINB_U,
+  TILE_OPC_MINB_U_SN,
+  TILE_OPC_MINH,
+  TILE_OPC_MINH_SN,
+  TILE_OPC_MINIB_U,
+  TILE_OPC_MINIB_U_SN,
+  TILE_OPC_MINIH,
+  TILE_OPC_MINIH_SN,
+  TILE_OPC_MM,
+  TILE_OPC_MNZ,
+  TILE_OPC_MNZ_SN,
+  TILE_OPC_MNZB,
+  TILE_OPC_MNZB_SN,
+  TILE_OPC_MNZH,
+  TILE_OPC_MNZH_SN,
+  TILE_OPC_MTSPR,
+  TILE_OPC_MULHH_SS,
+  TILE_OPC_MULHH_SS_SN,
+  TILE_OPC_MULHH_SU,
+  TILE_OPC_MULHH_SU_SN,
+  TILE_OPC_MULHH_UU,
+  TILE_OPC_MULHH_UU_SN,
+  TILE_OPC_MULHHA_SS,
+  TILE_OPC_MULHHA_SS_SN,
+  TILE_OPC_MULHHA_SU,
+  TILE_OPC_MULHHA_SU_SN,
+  TILE_OPC_MULHHA_UU,
+  TILE_OPC_MULHHA_UU_SN,
+  TILE_OPC_MULHHSA_UU,
+  TILE_OPC_MULHHSA_UU_SN,
+  TILE_OPC_MULHL_SS,
+  TILE_OPC_MULHL_SS_SN,
+  TILE_OPC_MULHL_SU,
+  TILE_OPC_MULHL_SU_SN,
+  TILE_OPC_MULHL_US,
+  TILE_OPC_MULHL_US_SN,
+  TILE_OPC_MULHL_UU,
+  TILE_OPC_MULHL_UU_SN,
+  TILE_OPC_MULHLA_SS,
+  TILE_OPC_MULHLA_SS_SN,
+  TILE_OPC_MULHLA_SU,
+  TILE_OPC_MULHLA_SU_SN,
+  TILE_OPC_MULHLA_US,
+  TILE_OPC_MULHLA_US_SN,
+  TILE_OPC_MULHLA_UU,
+  TILE_OPC_MULHLA_UU_SN,
+  TILE_OPC_MULHLSA_UU,
+  TILE_OPC_MULHLSA_UU_SN,
+  TILE_OPC_MULLL_SS,
+  TILE_OPC_MULLL_SS_SN,
+  TILE_OPC_MULLL_SU,
+  TILE_OPC_MULLL_SU_SN,
+  TILE_OPC_MULLL_UU,
+  TILE_OPC_MULLL_UU_SN,
+  TILE_OPC_MULLLA_SS,
+  TILE_OPC_MULLLA_SS_SN,
+  TILE_OPC_MULLLA_SU,
+  TILE_OPC_MULLLA_SU_SN,
+  TILE_OPC_MULLLA_UU,
+  TILE_OPC_MULLLA_UU_SN,
+  TILE_OPC_MULLLSA_UU,
+  TILE_OPC_MULLLSA_UU_SN,
+  TILE_OPC_MVNZ,
+  TILE_OPC_MVNZ_SN,
+  TILE_OPC_MVZ,
+  TILE_OPC_MVZ_SN,
+  TILE_OPC_MZ,
+  TILE_OPC_MZ_SN,
+  TILE_OPC_MZB,
+  TILE_OPC_MZB_SN,
+  TILE_OPC_MZH,
+  TILE_OPC_MZH_SN,
+  TILE_OPC_NAP,
+  TILE_OPC_NOP,
+  TILE_OPC_NOR,
+  TILE_OPC_NOR_SN,
+  TILE_OPC_OR,
+  TILE_OPC_OR_SN,
+  TILE_OPC_ORI,
+  TILE_OPC_ORI_SN,
+  TILE_OPC_PACKBS_U,
+  TILE_OPC_PACKBS_U_SN,
+  TILE_OPC_PACKHB,
+  TILE_OPC_PACKHB_SN,
+  TILE_OPC_PACKHS,
+  TILE_OPC_PACKHS_SN,
+  TILE_OPC_PACKLB,
+  TILE_OPC_PACKLB_SN,
+  TILE_OPC_PCNT,
+  TILE_OPC_PCNT_SN,
+  TILE_OPC_RL,
+  TILE_OPC_RL_SN,
+  TILE_OPC_RLI,
+  TILE_OPC_RLI_SN,
+  TILE_OPC_S1A,
+  TILE_OPC_S1A_SN,
+  TILE_OPC_S2A,
+  TILE_OPC_S2A_SN,
+  TILE_OPC_S3A,
+  TILE_OPC_S3A_SN,
+  TILE_OPC_SADAB_U,
+  TILE_OPC_SADAB_U_SN,
+  TILE_OPC_SADAH,
+  TILE_OPC_SADAH_SN,
+  TILE_OPC_SADAH_U,
+  TILE_OPC_SADAH_U_SN,
+  TILE_OPC_SADB_U,
+  TILE_OPC_SADB_U_SN,
+  TILE_OPC_SADH,
+  TILE_OPC_SADH_SN,
+  TILE_OPC_SADH_U,
+  TILE_OPC_SADH_U_SN,
+  TILE_OPC_SB,
+  TILE_OPC_SBADD,
+  TILE_OPC_SEQ,
+  TILE_OPC_SEQ_SN,
+  TILE_OPC_SEQB,
+  TILE_OPC_SEQB_SN,
+  TILE_OPC_SEQH,
+  TILE_OPC_SEQH_SN,
+  TILE_OPC_SEQI,
+  TILE_OPC_SEQI_SN,
+  TILE_OPC_SEQIB,
+  TILE_OPC_SEQIB_SN,
+  TILE_OPC_SEQIH,
+  TILE_OPC_SEQIH_SN,
+  TILE_OPC_SH,
+  TILE_OPC_SHADD,
+  TILE_OPC_SHL,
+  TILE_OPC_SHL_SN,
+  TILE_OPC_SHLB,
+  TILE_OPC_SHLB_SN,
+  TILE_OPC_SHLH,
+  TILE_OPC_SHLH_SN,
+  TILE_OPC_SHLI,
+  TILE_OPC_SHLI_SN,
+  TILE_OPC_SHLIB,
+  TILE_OPC_SHLIB_SN,
+  TILE_OPC_SHLIH,
+  TILE_OPC_SHLIH_SN,
+  TILE_OPC_SHR,
+  TILE_OPC_SHR_SN,
+  TILE_OPC_SHRB,
+  TILE_OPC_SHRB_SN,
+  TILE_OPC_SHRH,
+  TILE_OPC_SHRH_SN,
+  TILE_OPC_SHRI,
+  TILE_OPC_SHRI_SN,
+  TILE_OPC_SHRIB,
+  TILE_OPC_SHRIB_SN,
+  TILE_OPC_SHRIH,
+  TILE_OPC_SHRIH_SN,
+  TILE_OPC_SLT,
+  TILE_OPC_SLT_SN,
+  TILE_OPC_SLT_U,
+  TILE_OPC_SLT_U_SN,
+  TILE_OPC_SLTB,
+  TILE_OPC_SLTB_SN,
+  TILE_OPC_SLTB_U,
+  TILE_OPC_SLTB_U_SN,
+  TILE_OPC_SLTE,
+  TILE_OPC_SLTE_SN,
+  TILE_OPC_SLTE_U,
+  TILE_OPC_SLTE_U_SN,
+  TILE_OPC_SLTEB,
+  TILE_OPC_SLTEB_SN,
+  TILE_OPC_SLTEB_U,
+  TILE_OPC_SLTEB_U_SN,
+  TILE_OPC_SLTEH,
+  TILE_OPC_SLTEH_SN,
+  TILE_OPC_SLTEH_U,
+  TILE_OPC_SLTEH_U_SN,
+  TILE_OPC_SLTH,
+  TILE_OPC_SLTH_SN,
+  TILE_OPC_SLTH_U,
+  TILE_OPC_SLTH_U_SN,
+  TILE_OPC_SLTI,
+  TILE_OPC_SLTI_SN,
+  TILE_OPC_SLTI_U,
+  TILE_OPC_SLTI_U_SN,
+  TILE_OPC_SLTIB,
+  TILE_OPC_SLTIB_SN,
+  TILE_OPC_SLTIB_U,
+  TILE_OPC_SLTIB_U_SN,
+  TILE_OPC_SLTIH,
+  TILE_OPC_SLTIH_SN,
+  TILE_OPC_SLTIH_U,
+  TILE_OPC_SLTIH_U_SN,
+  TILE_OPC_SNE,
+  TILE_OPC_SNE_SN,
+  TILE_OPC_SNEB,
+  TILE_OPC_SNEB_SN,
+  TILE_OPC_SNEH,
+  TILE_OPC_SNEH_SN,
+  TILE_OPC_SRA,
+  TILE_OPC_SRA_SN,
+  TILE_OPC_SRAB,
+  TILE_OPC_SRAB_SN,
+  TILE_OPC_SRAH,
+  TILE_OPC_SRAH_SN,
+  TILE_OPC_SRAI,
+  TILE_OPC_SRAI_SN,
+  TILE_OPC_SRAIB,
+  TILE_OPC_SRAIB_SN,
+  TILE_OPC_SRAIH,
+  TILE_OPC_SRAIH_SN,
+  TILE_OPC_SUB,
+  TILE_OPC_SUB_SN,
+  TILE_OPC_SUBB,
+  TILE_OPC_SUBB_SN,
+  TILE_OPC_SUBBS_U,
+  TILE_OPC_SUBBS_U_SN,
+  TILE_OPC_SUBH,
+  TILE_OPC_SUBH_SN,
+  TILE_OPC_SUBHS,
+  TILE_OPC_SUBHS_SN,
+  TILE_OPC_SUBS,
+  TILE_OPC_SUBS_SN,
+  TILE_OPC_SW,
+  TILE_OPC_SWADD,
+  TILE_OPC_SWINT0,
+  TILE_OPC_SWINT1,
+  TILE_OPC_SWINT2,
+  TILE_OPC_SWINT3,
+  TILE_OPC_TBLIDXB0,
+  TILE_OPC_TBLIDXB0_SN,
+  TILE_OPC_TBLIDXB1,
+  TILE_OPC_TBLIDXB1_SN,
+  TILE_OPC_TBLIDXB2,
+  TILE_OPC_TBLIDXB2_SN,
+  TILE_OPC_TBLIDXB3,
+  TILE_OPC_TBLIDXB3_SN,
+  TILE_OPC_TNS,
+  TILE_OPC_TNS_SN,
+  TILE_OPC_WH64,
+  TILE_OPC_XOR,
+  TILE_OPC_XOR_SN,
+  TILE_OPC_XORI,
+  TILE_OPC_XORI_SN,
+  TILE_OPC_NONE
+} tile_mnemonic;
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL
+
+
+#define TILE_ELF_MACHINE_CODE EM_TILEPRO
+
+#define TILE_ELF_NAME "elf32-tilepro"
+
+
+static __inline unsigned int
+get_BrOff_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000);
+}
+
+static __inline unsigned int
+get_BrType_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0xf);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 2)) & 0x3);
+}
+
+static __inline unsigned int
+get_Dest_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmRROpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 8)) & 0x3);
+}
+
+static __inline unsigned int
+get_JOffLong_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x18000000);
+}
+
+static __inline unsigned int
+get_JOff_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x08000000);
+}
+
+static __inline unsigned int
+get_MF_Imm15_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x00003fff) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_MMEnd_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMEnd_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 23)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MT_Imm15_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x00003fc0) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_Mode(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 63)) & 0x1);
+}
+
+static __inline unsigned int
+get_NoRegOpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 10)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 56)) & 0x7);
+}
+
+static __inline unsigned int
+get_RROpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 4)) & 0xf);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_RouteOpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_S_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0x1);
+}
+
+static __inline unsigned int
+get_S_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tile_bundle_bits n)
+{
+  return (((n >> 26)) & 0x00000001) |
+         (((unsigned int)(n >> 50)) & 0x0000003e);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Src_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x7);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x7);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+  int shift = (int)(sizeof(int) * 8 - num_bits);
+  return (n << shift) >> shift;
+}
+
+
+
+static __inline tile_bundle_bits
+create_BrOff_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_BrOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20);
+}
+
+static __inline tile_bundle_bits
+create_BrType_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tile_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Dest_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 2);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xffff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7f)) << 51);
+}
+
+static __inline tile_bundle_bits
+create_ImmRROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 8);
+}
+
+static __inline tile_bundle_bits
+create_JOffLong_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tile_bundle_bits)(n & 0x18000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_JOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tile_bundle_bits)(n & 0x08000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_MF_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00003fff)) << 37) |
+         (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 18);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 23);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tile_bundle_bits
+create_MT_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tile_bundle_bits)(n & 0x00003fc0)) << 37) |
+         (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_Mode(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1)) << 63);
+}
+
+static __inline tile_bundle_bits
+create_NoRegOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 10);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 28);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 27);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7)) << 56);
+}
+
+static __inline tile_bundle_bits
+create_RROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 4);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1ff) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1ff)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RouteOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_S_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1) << 27);
+}
+
+static __inline tile_bundle_bits
+create_S_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x00000001) << 26) |
+         (((tile_bundle_bits)(n & 0x0000003e)) << 50);
+}
+
+static __inline tile_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Src_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 0);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3ff)) << 48);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7)) << 48);
+}
+
+
+
+typedef enum
+{
+  TILE_PIPELINE_X0,
+  TILE_PIPELINE_X1,
+  TILE_PIPELINE_Y0,
+  TILE_PIPELINE_Y1,
+  TILE_PIPELINE_Y2,
+} tile_pipeline;
+
+#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1)
+
+typedef enum
+{
+  TILE_OP_TYPE_REGISTER,
+  TILE_OP_TYPE_IMMEDIATE,
+  TILE_OP_TYPE_ADDRESS,
+  TILE_OP_TYPE_SPR
+} tile_operand_type;
+
+/* This is the bit that determines if a bundle is in the Y encoding. */
+#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63)
+
+enum
+{
+  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+  TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+  TILE_NUM_PIPELINE_ENCODINGS = 5,
+
+  /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */
+  TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+  /* Instructions take this many bytes. */
+  TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+  /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */
+  TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+  /* Bundles should be aligned modulo this number of bytes. */
+  TILE_BUNDLE_ALIGNMENT_IN_BYTES =
+    (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+  /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */
+  TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
+
+  /* Static network instructions take this many bytes. */
+  TILE_SN_INSTRUCTION_SIZE_IN_BYTES =
+    (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
+
+  /* Number of registers (some are magic, such as network I/O). */
+  TILE_NUM_REGISTERS = 64,
+
+  /* Number of static network registers. */
+  TILE_NUM_SN_REGISTERS = 4
+};
+
+
+struct tile_operand
+{
+  /* Is this operand a register, immediate or address? */
+  tile_operand_type type;
+
+  /* The default relocation type for this operand.  */
+  signed int default_reloc : 16;
+
+  /* How many bits is this value? (used for range checking) */
+  unsigned int num_bits : 5;
+
+  /* Is the value signed? (used for range checking) */
+  unsigned int is_signed : 1;
+
+  /* Is this operand a source register? */
+  unsigned int is_src_reg : 1;
+
+  /* Is this operand written? (i.e. is it a destination register) */
+  unsigned int is_dest_reg : 1;
+
+  /* Is this operand PC-relative? */
+  unsigned int is_pc_relative : 1;
+
+  /* By how many bits do we right shift the value before inserting? */
+  unsigned int rightshift : 2;
+
+  /* Return the bits for this operand to be ORed into an existing bundle. */
+  tile_bundle_bits (*insert) (int op);
+
+  /* Extract this operand and return it. */
+  unsigned int (*extract) (tile_bundle_bits bundle);
+};
+
+
+extern const struct tile_operand tile_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS];
+
+
+struct tile_opcode
+{
+  /* The opcode mnemonic, e.g. "add" */
+  const char *name;
+
+  /* The enum value for this mnemonic. */
+  tile_mnemonic mnemonic;
+
+  /* A bit mask of which of the five pipes this instruction
+     is compatible with:
+     X0  0x01
+     X1  0x02
+     Y0  0x04
+     Y1  0x08
+     Y2  0x10 */
+  unsigned char pipes;
+
+  /* How many operands are there? */
+  unsigned char num_operands;
+
+  /* Which register does this write implicitly, or TREG_ZERO if none? */
+  unsigned char implicitly_written_register;
+
+  /* Can this be bundled with other instructions (almost always true). */
+  unsigned char can_bundle;
+
+  /* The description of the operands. Each of these is an
+   * index into the tile_operands[] table. */
+  unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS];
+
+};
+
+extern const struct tile_opcode tile_opcodes[];
+
+
+/* Used for non-textual disassembly into structs. */
+struct tile_decoded_instruction
+{
+  const struct tile_opcode *opcode;
+  const struct tile_operand *operands[TILE_MAX_OPERANDS];
+  int operand_values[TILE_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tile(tile_bundle_bits bits,
+                           unsigned int pc,
+                           struct tile_decoded_instruction
+                           decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+
+#endif /* opcode_tile_h */
diff --git a/arch/tile/include/asm/opcode-tile_64.h b/arch/tile/include/asm/opcode-tile_64.h
new file mode 100644
index 00000000000..eda60ecbae3
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile_64.h
@@ -0,0 +1,1506 @@
+/* tile.h -- Header file for TILE opcode table
+   Copyright (C) 2005 Free Software Foundation, Inc.
+   Contributed by Tilera Corp. */
+
+#ifndef opcode_tile_h
+#define opcode_tile_h
+
+typedef unsigned long long tile_bundle_bits;
+
+
+enum
+{
+  TILE_MAX_OPERANDS = 5 /* mm */
+};
+
+typedef enum
+{
+  TILE_OPC_BPT,
+  TILE_OPC_INFO,
+  TILE_OPC_INFOL,
+  TILE_OPC_J,
+  TILE_OPC_JAL,
+  TILE_OPC_MOVE,
+  TILE_OPC_MOVE_SN,
+  TILE_OPC_MOVEI,
+  TILE_OPC_MOVEI_SN,
+  TILE_OPC_MOVELI,
+  TILE_OPC_MOVELI_SN,
+  TILE_OPC_MOVELIS,
+  TILE_OPC_PREFETCH,
+  TILE_OPC_RAISE,
+  TILE_OPC_ADD,
+  TILE_OPC_ADD_SN,
+  TILE_OPC_ADDB,
+  TILE_OPC_ADDB_SN,
+  TILE_OPC_ADDBS_U,
+  TILE_OPC_ADDBS_U_SN,
+  TILE_OPC_ADDH,
+  TILE_OPC_ADDH_SN,
+  TILE_OPC_ADDHS,
+  TILE_OPC_ADDHS_SN,
+  TILE_OPC_ADDI,
+  TILE_OPC_ADDI_SN,
+  TILE_OPC_ADDIB,
+  TILE_OPC_ADDIB_SN,
+  TILE_OPC_ADDIH,
+  TILE_OPC_ADDIH_SN,
+  TILE_OPC_ADDLI,
+  TILE_OPC_ADDLI_SN,
+  TILE_OPC_ADDLIS,
+  TILE_OPC_ADDS,
+  TILE_OPC_ADDS_SN,
+  TILE_OPC_ADIFFB_U,
+  TILE_OPC_ADIFFB_U_SN,
+  TILE_OPC_ADIFFH,
+  TILE_OPC_ADIFFH_SN,
+  TILE_OPC_AND,
+  TILE_OPC_AND_SN,
+  TILE_OPC_ANDI,
+  TILE_OPC_ANDI_SN,
+  TILE_OPC_AULI,
+  TILE_OPC_AVGB_U,
+  TILE_OPC_AVGB_U_SN,
+  TILE_OPC_AVGH,
+  TILE_OPC_AVGH_SN,
+  TILE_OPC_BBNS,
+  TILE_OPC_BBNS_SN,
+  TILE_OPC_BBNST,
+  TILE_OPC_BBNST_SN,
+  TILE_OPC_BBS,
+  TILE_OPC_BBS_SN,
+  TILE_OPC_BBST,
+  TILE_OPC_BBST_SN,
+  TILE_OPC_BGEZ,
+  TILE_OPC_BGEZ_SN,
+  TILE_OPC_BGEZT,
+  TILE_OPC_BGEZT_SN,
+  TILE_OPC_BGZ,
+  TILE_OPC_BGZ_SN,
+  TILE_OPC_BGZT,
+  TILE_OPC_BGZT_SN,
+  TILE_OPC_BITX,
+  TILE_OPC_BITX_SN,
+  TILE_OPC_BLEZ,
+  TILE_OPC_BLEZ_SN,
+  TILE_OPC_BLEZT,
+  TILE_OPC_BLEZT_SN,
+  TILE_OPC_BLZ,
+  TILE_OPC_BLZ_SN,
+  TILE_OPC_BLZT,
+  TILE_OPC_BLZT_SN,
+  TILE_OPC_BNZ,
+  TILE_OPC_BNZ_SN,
+  TILE_OPC_BNZT,
+  TILE_OPC_BNZT_SN,
+  TILE_OPC_BYTEX,
+  TILE_OPC_BYTEX_SN,
+  TILE_OPC_BZ,
+  TILE_OPC_BZ_SN,
+  TILE_OPC_BZT,
+  TILE_OPC_BZT_SN,
+  TILE_OPC_CLZ,
+  TILE_OPC_CLZ_SN,
+  TILE_OPC_CRC32_32,
+  TILE_OPC_CRC32_32_SN,
+  TILE_OPC_CRC32_8,
+  TILE_OPC_CRC32_8_SN,
+  TILE_OPC_CTZ,
+  TILE_OPC_CTZ_SN,
+  TILE_OPC_DRAIN,
+  TILE_OPC_DTLBPR,
+  TILE_OPC_DWORD_ALIGN,
+  TILE_OPC_DWORD_ALIGN_SN,
+  TILE_OPC_FINV,
+  TILE_OPC_FLUSH,
+  TILE_OPC_FNOP,
+  TILE_OPC_ICOH,
+  TILE_OPC_ILL,
+  TILE_OPC_INTHB,
+  TILE_OPC_INTHB_SN,
+  TILE_OPC_INTHH,
+  TILE_OPC_INTHH_SN,
+  TILE_OPC_INTLB,
+  TILE_OPC_INTLB_SN,
+  TILE_OPC_INTLH,
+  TILE_OPC_INTLH_SN,
+  TILE_OPC_INV,
+  TILE_OPC_IRET,
+  TILE_OPC_JALB,
+  TILE_OPC_JALF,
+  TILE_OPC_JALR,
+  TILE_OPC_JALRP,
+  TILE_OPC_JB,
+  TILE_OPC_JF,
+  TILE_OPC_JR,
+  TILE_OPC_JRP,
+  TILE_OPC_LB,
+  TILE_OPC_LB_SN,
+  TILE_OPC_LB_U,
+  TILE_OPC_LB_U_SN,
+  TILE_OPC_LBADD,
+  TILE_OPC_LBADD_SN,
+  TILE_OPC_LBADD_U,
+  TILE_OPC_LBADD_U_SN,
+  TILE_OPC_LH,
+  TILE_OPC_LH_SN,
+  TILE_OPC_LH_U,
+  TILE_OPC_LH_U_SN,
+  TILE_OPC_LHADD,
+  TILE_OPC_LHADD_SN,
+  TILE_OPC_LHADD_U,
+  TILE_OPC_LHADD_U_SN,
+  TILE_OPC_LNK,
+  TILE_OPC_LNK_SN,
+  TILE_OPC_LW,
+  TILE_OPC_LW_SN,
+  TILE_OPC_LW_NA,
+  TILE_OPC_LW_NA_SN,
+  TILE_OPC_LWADD,
+  TILE_OPC_LWADD_SN,
+  TILE_OPC_LWADD_NA,
+  TILE_OPC_LWADD_NA_SN,
+  TILE_OPC_MAXB_U,
+  TILE_OPC_MAXB_U_SN,
+  TILE_OPC_MAXH,
+  TILE_OPC_MAXH_SN,
+  TILE_OPC_MAXIB_U,
+  TILE_OPC_MAXIB_U_SN,
+  TILE_OPC_MAXIH,
+  TILE_OPC_MAXIH_SN,
+  TILE_OPC_MF,
+  TILE_OPC_MFSPR,
+  TILE_OPC_MINB_U,
+  TILE_OPC_MINB_U_SN,
+  TILE_OPC_MINH,
+  TILE_OPC_MINH_SN,
+  TILE_OPC_MINIB_U,
+  TILE_OPC_MINIB_U_SN,
+  TILE_OPC_MINIH,
+  TILE_OPC_MINIH_SN,
+  TILE_OPC_MM,
+  TILE_OPC_MNZ,
+  TILE_OPC_MNZ_SN,
+  TILE_OPC_MNZB,
+  TILE_OPC_MNZB_SN,
+  TILE_OPC_MNZH,
+  TILE_OPC_MNZH_SN,
+  TILE_OPC_MTSPR,
+  TILE_OPC_MULHH_SS,
+  TILE_OPC_MULHH_SS_SN,
+  TILE_OPC_MULHH_SU,
+  TILE_OPC_MULHH_SU_SN,
+  TILE_OPC_MULHH_UU,
+  TILE_OPC_MULHH_UU_SN,
+  TILE_OPC_MULHHA_SS,
+  TILE_OPC_MULHHA_SS_SN,
+  TILE_OPC_MULHHA_SU,
+  TILE_OPC_MULHHA_SU_SN,
+  TILE_OPC_MULHHA_UU,
+  TILE_OPC_MULHHA_UU_SN,
+  TILE_OPC_MULHHSA_UU,
+  TILE_OPC_MULHHSA_UU_SN,
+  TILE_OPC_MULHL_SS,
+  TILE_OPC_MULHL_SS_SN,
+  TILE_OPC_MULHL_SU,
+  TILE_OPC_MULHL_SU_SN,
+  TILE_OPC_MULHL_US,
+  TILE_OPC_MULHL_US_SN,
+  TILE_OPC_MULHL_UU,
+  TILE_OPC_MULHL_UU_SN,
+  TILE_OPC_MULHLA_SS,
+  TILE_OPC_MULHLA_SS_SN,
+  TILE_OPC_MULHLA_SU,
+  TILE_OPC_MULHLA_SU_SN,
+  TILE_OPC_MULHLA_US,
+  TILE_OPC_MULHLA_US_SN,
+  TILE_OPC_MULHLA_UU,
+  TILE_OPC_MULHLA_UU_SN,
+  TILE_OPC_MULHLSA_UU,
+  TILE_OPC_MULHLSA_UU_SN,
+  TILE_OPC_MULLL_SS,
+  TILE_OPC_MULLL_SS_SN,
+  TILE_OPC_MULLL_SU,
+  TILE_OPC_MULLL_SU_SN,
+  TILE_OPC_MULLL_UU,
+  TILE_OPC_MULLL_UU_SN,
+  TILE_OPC_MULLLA_SS,
+  TILE_OPC_MULLLA_SS_SN,
+  TILE_OPC_MULLLA_SU,
+  TILE_OPC_MULLLA_SU_SN,
+  TILE_OPC_MULLLA_UU,
+  TILE_OPC_MULLLA_UU_SN,
+  TILE_OPC_MULLLSA_UU,
+  TILE_OPC_MULLLSA_UU_SN,
+  TILE_OPC_MVNZ,
+  TILE_OPC_MVNZ_SN,
+  TILE_OPC_MVZ,
+  TILE_OPC_MVZ_SN,
+  TILE_OPC_MZ,
+  TILE_OPC_MZ_SN,
+  TILE_OPC_MZB,
+  TILE_OPC_MZB_SN,
+  TILE_OPC_MZH,
+  TILE_OPC_MZH_SN,
+  TILE_OPC_NAP,
+  TILE_OPC_NOP,
+  TILE_OPC_NOR,
+  TILE_OPC_NOR_SN,
+  TILE_OPC_OR,
+  TILE_OPC_OR_SN,
+  TILE_OPC_ORI,
+  TILE_OPC_ORI_SN,
+  TILE_OPC_PACKBS_U,
+  TILE_OPC_PACKBS_U_SN,
+  TILE_OPC_PACKHB,
+  TILE_OPC_PACKHB_SN,
+  TILE_OPC_PACKHS,
+  TILE_OPC_PACKHS_SN,
+  TILE_OPC_PACKLB,
+  TILE_OPC_PACKLB_SN,
+  TILE_OPC_PCNT,
+  TILE_OPC_PCNT_SN,
+  TILE_OPC_RL,
+  TILE_OPC_RL_SN,
+  TILE_OPC_RLI,
+  TILE_OPC_RLI_SN,
+  TILE_OPC_S1A,
+  TILE_OPC_S1A_SN,
+  TILE_OPC_S2A,
+  TILE_OPC_S2A_SN,
+  TILE_OPC_S3A,
+  TILE_OPC_S3A_SN,
+  TILE_OPC_SADAB_U,
+  TILE_OPC_SADAB_U_SN,
+  TILE_OPC_SADAH,
+  TILE_OPC_SADAH_SN,
+  TILE_OPC_SADAH_U,
+  TILE_OPC_SADAH_U_SN,
+  TILE_OPC_SADB_U,
+  TILE_OPC_SADB_U_SN,
+  TILE_OPC_SADH,
+  TILE_OPC_SADH_SN,
+  TILE_OPC_SADH_U,
+  TILE_OPC_SADH_U_SN,
+  TILE_OPC_SB,
+  TILE_OPC_SBADD,
+  TILE_OPC_SEQ,
+  TILE_OPC_SEQ_SN,
+  TILE_OPC_SEQB,
+  TILE_OPC_SEQB_SN,
+  TILE_OPC_SEQH,
+  TILE_OPC_SEQH_SN,
+  TILE_OPC_SEQI,
+  TILE_OPC_SEQI_SN,
+  TILE_OPC_SEQIB,
+  TILE_OPC_SEQIB_SN,
+  TILE_OPC_SEQIH,
+  TILE_OPC_SEQIH_SN,
+  TILE_OPC_SH,
+  TILE_OPC_SHADD,
+  TILE_OPC_SHL,
+  TILE_OPC_SHL_SN,
+  TILE_OPC_SHLB,
+  TILE_OPC_SHLB_SN,
+  TILE_OPC_SHLH,
+  TILE_OPC_SHLH_SN,
+  TILE_OPC_SHLI,
+  TILE_OPC_SHLI_SN,
+  TILE_OPC_SHLIB,
+  TILE_OPC_SHLIB_SN,
+  TILE_OPC_SHLIH,
+  TILE_OPC_SHLIH_SN,
+  TILE_OPC_SHR,
+  TILE_OPC_SHR_SN,
+  TILE_OPC_SHRB,
+  TILE_OPC_SHRB_SN,
+  TILE_OPC_SHRH,
+  TILE_OPC_SHRH_SN,
+  TILE_OPC_SHRI,
+  TILE_OPC_SHRI_SN,
+  TILE_OPC_SHRIB,
+  TILE_OPC_SHRIB_SN,
+  TILE_OPC_SHRIH,
+  TILE_OPC_SHRIH_SN,
+  TILE_OPC_SLT,
+  TILE_OPC_SLT_SN,
+  TILE_OPC_SLT_U,
+  TILE_OPC_SLT_U_SN,
+  TILE_OPC_SLTB,
+  TILE_OPC_SLTB_SN,
+  TILE_OPC_SLTB_U,
+  TILE_OPC_SLTB_U_SN,
+  TILE_OPC_SLTE,
+  TILE_OPC_SLTE_SN,
+  TILE_OPC_SLTE_U,
+  TILE_OPC_SLTE_U_SN,
+  TILE_OPC_SLTEB,
+  TILE_OPC_SLTEB_SN,
+  TILE_OPC_SLTEB_U,
+  TILE_OPC_SLTEB_U_SN,
+  TILE_OPC_SLTEH,
+  TILE_OPC_SLTEH_SN,
+  TILE_OPC_SLTEH_U,
+  TILE_OPC_SLTEH_U_SN,
+  TILE_OPC_SLTH,
+  TILE_OPC_SLTH_SN,
+  TILE_OPC_SLTH_U,
+  TILE_OPC_SLTH_U_SN,
+  TILE_OPC_SLTI,
+  TILE_OPC_SLTI_SN,
+  TILE_OPC_SLTI_U,
+  TILE_OPC_SLTI_U_SN,
+  TILE_OPC_SLTIB,
+  TILE_OPC_SLTIB_SN,
+  TILE_OPC_SLTIB_U,
+  TILE_OPC_SLTIB_U_SN,
+  TILE_OPC_SLTIH,
+  TILE_OPC_SLTIH_SN,
+  TILE_OPC_SLTIH_U,
+  TILE_OPC_SLTIH_U_SN,
+  TILE_OPC_SNE,
+  TILE_OPC_SNE_SN,
+  TILE_OPC_SNEB,
+  TILE_OPC_SNEB_SN,
+  TILE_OPC_SNEH,
+  TILE_OPC_SNEH_SN,
+  TILE_OPC_SRA,
+  TILE_OPC_SRA_SN,
+  TILE_OPC_SRAB,
+  TILE_OPC_SRAB_SN,
+  TILE_OPC_SRAH,
+  TILE_OPC_SRAH_SN,
+  TILE_OPC_SRAI,
+  TILE_OPC_SRAI_SN,
+  TILE_OPC_SRAIB,
+  TILE_OPC_SRAIB_SN,
+  TILE_OPC_SRAIH,
+  TILE_OPC_SRAIH_SN,
+  TILE_OPC_SUB,
+  TILE_OPC_SUB_SN,
+  TILE_OPC_SUBB,
+  TILE_OPC_SUBB_SN,
+  TILE_OPC_SUBBS_U,
+  TILE_OPC_SUBBS_U_SN,
+  TILE_OPC_SUBH,
+  TILE_OPC_SUBH_SN,
+  TILE_OPC_SUBHS,
+  TILE_OPC_SUBHS_SN,
+  TILE_OPC_SUBS,
+  TILE_OPC_SUBS_SN,
+  TILE_OPC_SW,
+  TILE_OPC_SWADD,
+  TILE_OPC_SWINT0,
+  TILE_OPC_SWINT1,
+  TILE_OPC_SWINT2,
+  TILE_OPC_SWINT3,
+  TILE_OPC_TBLIDXB0,
+  TILE_OPC_TBLIDXB0_SN,
+  TILE_OPC_TBLIDXB1,
+  TILE_OPC_TBLIDXB1_SN,
+  TILE_OPC_TBLIDXB2,
+  TILE_OPC_TBLIDXB2_SN,
+  TILE_OPC_TBLIDXB3,
+  TILE_OPC_TBLIDXB3_SN,
+  TILE_OPC_TNS,
+  TILE_OPC_TNS_SN,
+  TILE_OPC_WH64,
+  TILE_OPC_XOR,
+  TILE_OPC_XOR_SN,
+  TILE_OPC_XORI,
+  TILE_OPC_XORI_SN,
+  TILE_OPC_NONE
+} tile_mnemonic;
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL
+
+
+#define TILE_ELF_MACHINE_CODE EM_TILEPRO
+
+#define TILE_ELF_NAME "elf32-tilepro"
+
+
+static __inline unsigned int
+get_BrOff_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000);
+}
+
+static __inline unsigned int
+get_BrType_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0xf);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 2)) & 0x3);
+}
+
+static __inline unsigned int
+get_Dest_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 51)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmRROpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 8)) & 0x3);
+}
+
+static __inline unsigned int
+get_JOffLong_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x18000000);
+}
+
+static __inline unsigned int
+get_JOff_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x00007fff) |
+         (((unsigned int)(n >> 20)) & 0x00018000) |
+         (((unsigned int)(n >> 14)) & 0x001e0000) |
+         (((unsigned int)(n >> 16)) & 0x07e00000) |
+         (((unsigned int)(n >> 31)) & 0x08000000);
+}
+
+static __inline unsigned int
+get_MF_Imm15_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x00003fff) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_MMEnd_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMEnd_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 23)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MT_Imm15_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 31)) & 0x0000003f) |
+         (((unsigned int)(n >> 37)) & 0x00003fc0) |
+         (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_Mode(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 63)) & 0x1);
+}
+
+static __inline unsigned int
+get_NoRegOpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 10)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 56)) & 0x7);
+}
+
+static __inline unsigned int
+get_RROpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 4)) & 0xf);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_RouteOpcodeExtension_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_S_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 27)) & 0x1);
+}
+
+static __inline unsigned int
+get_S_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tile_bundle_bits n)
+{
+  return (((n >> 26)) & 0x00000001) |
+         (((unsigned int)(n >> 50)) & 0x0000003e);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Src_SN(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 0)) & 0x3);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y0(tile_bundle_bits num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((n >> 17)) & 0x7);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y1(tile_bundle_bits n)
+{
+  return (((unsigned int)(n >> 48)) & 0x7);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+  int shift = (int)(sizeof(int) * 8 - num_bits);
+  return (n << shift) >> shift;
+}
+
+
+
+static __inline tile_bundle_bits
+create_BrOff_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_BrOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20);
+}
+
+static __inline tile_bundle_bits
+create_BrType_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tile_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Dest_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 2);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xffff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7f)) << 51);
+}
+
+static __inline tile_bundle_bits
+create_ImmRROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 8);
+}
+
+static __inline tile_bundle_bits
+create_JOffLong_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tile_bundle_bits)(n & 0x18000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_JOff_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+         (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+         (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+         (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+         (((tile_bundle_bits)(n & 0x08000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_MF_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x00003fff)) << 37) |
+         (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 18);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 23);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tile_bundle_bits
+create_MT_Imm15_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+         (((tile_bundle_bits)(n & 0x00003fc0)) << 37) |
+         (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_Mode(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1)) << 63);
+}
+
+static __inline tile_bundle_bits
+create_NoRegOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 10);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 28);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 27);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7)) << 56);
+}
+
+static __inline tile_bundle_bits
+create_RROpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0xf) << 4);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1ff) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1ff)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RouteOpcodeExtension_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_S_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1) << 27);
+}
+
+static __inline tile_bundle_bits
+create_S_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x00000001) << 26) |
+         (((tile_bundle_bits)(n & 0x0000003e)) << 50);
+}
+
+static __inline tile_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Src_SN(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3) << 0);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x3ff) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x3ff)) << 48);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y0(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return ((n & 0x7) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y1(int num)
+{
+  const unsigned int n = (unsigned int)num;
+  return (((tile_bundle_bits)(n & 0x7)) << 48);
+}
+
+
+
+typedef enum
+{
+  TILE_PIPELINE_X0,
+  TILE_PIPELINE_X1,
+  TILE_PIPELINE_Y0,
+  TILE_PIPELINE_Y1,
+  TILE_PIPELINE_Y2,
+} tile_pipeline;
+
+#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1)
+
+typedef enum
+{
+  TILE_OP_TYPE_REGISTER,
+  TILE_OP_TYPE_IMMEDIATE,
+  TILE_OP_TYPE_ADDRESS,
+  TILE_OP_TYPE_SPR
+} tile_operand_type;
+
+/* This is the bit that determines if a bundle is in the Y encoding. */
+#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63)
+
+enum
+{
+  /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+  TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+  /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+  TILE_NUM_PIPELINE_ENCODINGS = 5,
+
+  /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */
+  TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+  /* Instructions take this many bytes. */
+  TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+  /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */
+  TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+  /* Bundles should be aligned modulo this number of bytes. */
+  TILE_BUNDLE_ALIGNMENT_IN_BYTES =
+    (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+  /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */
+  TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
+
+  /* Static network instructions take this many bytes. */
+  TILE_SN_INSTRUCTION_SIZE_IN_BYTES =
+    (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
+
+  /* Number of registers (some are magic, such as network I/O). */
+  TILE_NUM_REGISTERS = 64,
+
+  /* Number of static network registers. */
+  TILE_NUM_SN_REGISTERS = 4
+};
+
+
+struct tile_operand
+{
+  /* Is this operand a register, immediate or address? */
+  tile_operand_type type;
+
+  /* The default relocation type for this operand.  */
+  signed int default_reloc : 16;
+
+  /* How many bits is this value? (used for range checking) */
+  unsigned int num_bits : 5;
+
+  /* Is the value signed? (used for range checking) */
+  unsigned int is_signed : 1;
+
+  /* Is this operand a source register? */
+  unsigned int is_src_reg : 1;
+
+  /* Is this operand written? (i.e. is it a destination register) */
+  unsigned int is_dest_reg : 1;
+
+  /* Is this operand PC-relative? */
+  unsigned int is_pc_relative : 1;
+
+  /* By how many bits do we right shift the value before inserting? */
+  unsigned int rightshift : 2;
+
+  /* Return the bits for this operand to be ORed into an existing bundle. */
+  tile_bundle_bits (*insert) (int op);
+
+  /* Extract this operand and return it. */
+  unsigned int (*extract) (tile_bundle_bits bundle);
+};
+
+
+extern const struct tile_operand tile_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS];
+
+
+struct tile_opcode
+{
+  /* The opcode mnemonic, e.g. "add" */
+  const char *name;
+
+  /* The enum value for this mnemonic. */
+  tile_mnemonic mnemonic;
+
+  /* A bit mask of which of the five pipes this instruction
+     is compatible with:
+     X0  0x01
+     X1  0x02
+     Y0  0x04
+     Y1  0x08
+     Y2  0x10 */
+  unsigned char pipes;
+
+  /* How many operands are there? */
+  unsigned char num_operands;
+
+  /* Which register does this write implicitly, or TREG_ZERO if none? */
+  unsigned char implicitly_written_register;
+
+  /* Can this be bundled with other instructions (almost always true). */
+  unsigned char can_bundle;
+
+  /* The description of the operands. Each of these is an
+   * index into the tile_operands[] table. */
+  unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS];
+
+};
+
+extern const struct tile_opcode tile_opcodes[];
+
+
+/* Used for non-textual disassembly into structs. */
+struct tile_decoded_instruction
+{
+  const struct tile_opcode *opcode;
+  const struct tile_operand *operands[TILE_MAX_OPERANDS];
+  int operand_values[TILE_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tile(tile_bundle_bits bits,
+                           unsigned int pc,
+                           struct tile_decoded_instruction
+                           decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+
+#endif /* opcode_tile_h */
diff --git a/arch/tile/include/asm/opcode_constants.h b/arch/tile/include/asm/opcode_constants.h
new file mode 100644
index 00000000000..37a9f2958cb
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_OPCODE_CONSTANTS_H
+#define _ASM_TILE_OPCODE_CONSTANTS_H
+
+#include <arch/chip.h>
+
+#if CHIP_WORD_SIZE() == 64
+#include <asm/opcode_constants_64.h>
+#else
+#include <asm/opcode_constants_32.h>
+#endif
+
+#endif /* _ASM_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/opcode_constants_32.h b/arch/tile/include/asm/opcode_constants_32.h
new file mode 100644
index 00000000000..227d033b180
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants_32.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+
+
+#ifndef _TILE_OPCODE_CONSTANTS_H
+#define _TILE_OPCODE_CONSTANTS_H
+enum
+{
+  ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
+  ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
+  ADDB_SPECIAL_0_OPCODE_X0 = 1,
+  ADDB_SPECIAL_0_OPCODE_X1 = 1,
+  ADDHS_SPECIAL_0_OPCODE_X0 = 99,
+  ADDHS_SPECIAL_0_OPCODE_X1 = 69,
+  ADDH_SPECIAL_0_OPCODE_X0 = 2,
+  ADDH_SPECIAL_0_OPCODE_X1 = 2,
+  ADDIB_IMM_0_OPCODE_X0 = 1,
+  ADDIB_IMM_0_OPCODE_X1 = 1,
+  ADDIH_IMM_0_OPCODE_X0 = 2,
+  ADDIH_IMM_0_OPCODE_X1 = 2,
+  ADDI_IMM_0_OPCODE_X0 = 3,
+  ADDI_IMM_0_OPCODE_X1 = 3,
+  ADDI_IMM_1_OPCODE_SN = 1,
+  ADDI_OPCODE_Y0 = 9,
+  ADDI_OPCODE_Y1 = 7,
+  ADDLIS_OPCODE_X0 = 1,
+  ADDLIS_OPCODE_X1 = 2,
+  ADDLI_OPCODE_X0 = 2,
+  ADDLI_OPCODE_X1 = 3,
+  ADDS_SPECIAL_0_OPCODE_X0 = 96,
+  ADDS_SPECIAL_0_OPCODE_X1 = 66,
+  ADD_SPECIAL_0_OPCODE_X0 = 3,
+  ADD_SPECIAL_0_OPCODE_X1 = 3,
+  ADD_SPECIAL_0_OPCODE_Y0 = 0,
+  ADD_SPECIAL_0_OPCODE_Y1 = 0,
+  ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
+  ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
+  ANDI_IMM_0_OPCODE_X0 = 1,
+  ANDI_IMM_0_OPCODE_X1 = 4,
+  ANDI_OPCODE_Y0 = 10,
+  ANDI_OPCODE_Y1 = 8,
+  AND_SPECIAL_0_OPCODE_X0 = 6,
+  AND_SPECIAL_0_OPCODE_X1 = 4,
+  AND_SPECIAL_2_OPCODE_Y0 = 0,
+  AND_SPECIAL_2_OPCODE_Y1 = 0,
+  AULI_OPCODE_X0 = 3,
+  AULI_OPCODE_X1 = 4,
+  AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
+  AVGH_SPECIAL_0_OPCODE_X0 = 8,
+  BBNST_BRANCH_OPCODE_X1 = 15,
+  BBNS_BRANCH_OPCODE_X1 = 14,
+  BBNS_OPCODE_SN = 63,
+  BBST_BRANCH_OPCODE_X1 = 13,
+  BBS_BRANCH_OPCODE_X1 = 12,
+  BBS_OPCODE_SN = 62,
+  BGEZT_BRANCH_OPCODE_X1 = 7,
+  BGEZ_BRANCH_OPCODE_X1 = 6,
+  BGEZ_OPCODE_SN = 61,
+  BGZT_BRANCH_OPCODE_X1 = 5,
+  BGZ_BRANCH_OPCODE_X1 = 4,
+  BGZ_OPCODE_SN = 58,
+  BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
+  BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
+  BLEZT_BRANCH_OPCODE_X1 = 11,
+  BLEZ_BRANCH_OPCODE_X1 = 10,
+  BLEZ_OPCODE_SN = 59,
+  BLZT_BRANCH_OPCODE_X1 = 9,
+  BLZ_BRANCH_OPCODE_X1 = 8,
+  BLZ_OPCODE_SN = 60,
+  BNZT_BRANCH_OPCODE_X1 = 3,
+  BNZ_BRANCH_OPCODE_X1 = 2,
+  BNZ_OPCODE_SN = 57,
+  BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
+  BRANCH_OPCODE_X1 = 5,
+  BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
+  BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
+  BZT_BRANCH_OPCODE_X1 = 1,
+  BZ_BRANCH_OPCODE_X1 = 0,
+  BZ_OPCODE_SN = 56,
+  CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
+  CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
+  CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
+  CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
+  CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
+  CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
+  DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
+  DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
+  DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
+  FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
+  FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
+  FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
+  FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
+  HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
+  ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
+  ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
+  ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
+  IMM_0_OPCODE_SN = 0,
+  IMM_0_OPCODE_X0 = 4,
+  IMM_0_OPCODE_X1 = 6,
+  IMM_1_OPCODE_SN = 1,
+  IMM_OPCODE_0_X0 = 5,
+  INTHB_SPECIAL_0_OPCODE_X0 = 11,
+  INTHB_SPECIAL_0_OPCODE_X1 = 5,
+  INTHH_SPECIAL_0_OPCODE_X0 = 12,
+  INTHH_SPECIAL_0_OPCODE_X1 = 6,
+  INTLB_SPECIAL_0_OPCODE_X0 = 13,
+  INTLB_SPECIAL_0_OPCODE_X1 = 7,
+  INTLH_SPECIAL_0_OPCODE_X0 = 14,
+  INTLH_SPECIAL_0_OPCODE_X1 = 8,
+  INV_UN_0_SHUN_0_OPCODE_X1 = 8,
+  IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
+  JALB_OPCODE_X1 = 13,
+  JALF_OPCODE_X1 = 12,
+  JALRP_SPECIAL_0_OPCODE_X1 = 9,
+  JALRR_IMM_1_OPCODE_SN = 3,
+  JALR_RR_IMM_0_OPCODE_SN = 5,
+  JALR_SPECIAL_0_OPCODE_X1 = 10,
+  JB_OPCODE_X1 = 11,
+  JF_OPCODE_X1 = 10,
+  JRP_SPECIAL_0_OPCODE_X1 = 11,
+  JRR_IMM_1_OPCODE_SN = 2,
+  JR_RR_IMM_0_OPCODE_SN = 4,
+  JR_SPECIAL_0_OPCODE_X1 = 12,
+  LBADD_IMM_0_OPCODE_X1 = 22,
+  LBADD_U_IMM_0_OPCODE_X1 = 23,
+  LB_OPCODE_Y2 = 0,
+  LB_UN_0_SHUN_0_OPCODE_X1 = 10,
+  LB_U_OPCODE_Y2 = 1,
+  LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
+  LHADD_IMM_0_OPCODE_X1 = 24,
+  LHADD_U_IMM_0_OPCODE_X1 = 25,
+  LH_OPCODE_Y2 = 2,
+  LH_UN_0_SHUN_0_OPCODE_X1 = 12,
+  LH_U_OPCODE_Y2 = 3,
+  LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
+  LNK_SPECIAL_0_OPCODE_X1 = 13,
+  LWADD_IMM_0_OPCODE_X1 = 26,
+  LWADD_NA_IMM_0_OPCODE_X1 = 27,
+  LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
+  LW_OPCODE_Y2 = 4,
+  LW_UN_0_SHUN_0_OPCODE_X1 = 14,
+  MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
+  MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
+  MAXH_SPECIAL_0_OPCODE_X0 = 16,
+  MAXH_SPECIAL_0_OPCODE_X1 = 15,
+  MAXIB_U_IMM_0_OPCODE_X0 = 4,
+  MAXIB_U_IMM_0_OPCODE_X1 = 5,
+  MAXIH_IMM_0_OPCODE_X0 = 5,
+  MAXIH_IMM_0_OPCODE_X1 = 6,
+  MFSPR_IMM_0_OPCODE_X1 = 7,
+  MF_UN_0_SHUN_0_OPCODE_X1 = 15,
+  MINB_U_SPECIAL_0_OPCODE_X0 = 17,
+  MINB_U_SPECIAL_0_OPCODE_X1 = 16,
+  MINH_SPECIAL_0_OPCODE_X0 = 18,
+  MINH_SPECIAL_0_OPCODE_X1 = 17,
+  MINIB_U_IMM_0_OPCODE_X0 = 6,
+  MINIB_U_IMM_0_OPCODE_X1 = 8,
+  MINIH_IMM_0_OPCODE_X0 = 7,
+  MINIH_IMM_0_OPCODE_X1 = 9,
+  MM_OPCODE_X0 = 6,
+  MM_OPCODE_X1 = 7,
+  MNZB_SPECIAL_0_OPCODE_X0 = 19,
+  MNZB_SPECIAL_0_OPCODE_X1 = 18,
+  MNZH_SPECIAL_0_OPCODE_X0 = 20,
+  MNZH_SPECIAL_0_OPCODE_X1 = 19,
+  MNZ_SPECIAL_0_OPCODE_X0 = 21,
+  MNZ_SPECIAL_0_OPCODE_X1 = 20,
+  MNZ_SPECIAL_1_OPCODE_Y0 = 0,
+  MNZ_SPECIAL_1_OPCODE_Y1 = 1,
+  MOVEI_IMM_1_OPCODE_SN = 0,
+  MOVE_RR_IMM_0_OPCODE_SN = 8,
+  MTSPR_IMM_0_OPCODE_X1 = 10,
+  MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
+  MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
+  MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
+  MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
+  MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
+  MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
+  MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
+  MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
+  MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
+  MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
+  MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
+  MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
+  MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
+  MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
+  MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
+  MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
+  MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
+  MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
+  MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
+  MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
+  MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
+  MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
+  MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
+  MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
+  MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
+  MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
+  MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
+  MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
+  MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
+  MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
+  MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
+  MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
+  MVNZ_SPECIAL_0_OPCODE_X0 = 45,
+  MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
+  MVZ_SPECIAL_0_OPCODE_X0 = 46,
+  MVZ_SPECIAL_1_OPCODE_Y0 = 2,
+  MZB_SPECIAL_0_OPCODE_X0 = 47,
+  MZB_SPECIAL_0_OPCODE_X1 = 21,
+  MZH_SPECIAL_0_OPCODE_X0 = 48,
+  MZH_SPECIAL_0_OPCODE_X1 = 22,
+  MZ_SPECIAL_0_OPCODE_X0 = 49,
+  MZ_SPECIAL_0_OPCODE_X1 = 23,
+  MZ_SPECIAL_1_OPCODE_Y0 = 3,
+  MZ_SPECIAL_1_OPCODE_Y1 = 2,
+  NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
+  NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
+  NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
+  NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
+  NOREG_RR_IMM_0_OPCODE_SN = 0,
+  NOR_SPECIAL_0_OPCODE_X0 = 50,
+  NOR_SPECIAL_0_OPCODE_X1 = 24,
+  NOR_SPECIAL_2_OPCODE_Y0 = 1,
+  NOR_SPECIAL_2_OPCODE_Y1 = 1,
+  ORI_IMM_0_OPCODE_X0 = 8,
+  ORI_IMM_0_OPCODE_X1 = 11,
+  ORI_OPCODE_Y0 = 11,
+  ORI_OPCODE_Y1 = 9,
+  OR_SPECIAL_0_OPCODE_X0 = 51,
+  OR_SPECIAL_0_OPCODE_X1 = 25,
+  OR_SPECIAL_2_OPCODE_Y0 = 2,
+  OR_SPECIAL_2_OPCODE_Y1 = 2,
+  PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
+  PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
+  PACKHB_SPECIAL_0_OPCODE_X0 = 52,
+  PACKHB_SPECIAL_0_OPCODE_X1 = 26,
+  PACKHS_SPECIAL_0_OPCODE_X0 = 102,
+  PACKHS_SPECIAL_0_OPCODE_X1 = 72,
+  PACKLB_SPECIAL_0_OPCODE_X0 = 53,
+  PACKLB_SPECIAL_0_OPCODE_X1 = 27,
+  PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
+  PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
+  RLI_SHUN_0_OPCODE_X0 = 1,
+  RLI_SHUN_0_OPCODE_X1 = 1,
+  RLI_SHUN_0_OPCODE_Y0 = 1,
+  RLI_SHUN_0_OPCODE_Y1 = 1,
+  RL_SPECIAL_0_OPCODE_X0 = 54,
+  RL_SPECIAL_0_OPCODE_X1 = 28,
+  RL_SPECIAL_3_OPCODE_Y0 = 0,
+  RL_SPECIAL_3_OPCODE_Y1 = 0,
+  RR_IMM_0_OPCODE_SN = 0,
+  S1A_SPECIAL_0_OPCODE_X0 = 55,
+  S1A_SPECIAL_0_OPCODE_X1 = 29,
+  S1A_SPECIAL_0_OPCODE_Y0 = 1,
+  S1A_SPECIAL_0_OPCODE_Y1 = 1,
+  S2A_SPECIAL_0_OPCODE_X0 = 56,
+  S2A_SPECIAL_0_OPCODE_X1 = 30,
+  S2A_SPECIAL_0_OPCODE_Y0 = 2,
+  S2A_SPECIAL_0_OPCODE_Y1 = 2,
+  S3A_SPECIAL_0_OPCODE_X0 = 57,
+  S3A_SPECIAL_0_OPCODE_X1 = 31,
+  S3A_SPECIAL_5_OPCODE_Y0 = 1,
+  S3A_SPECIAL_5_OPCODE_Y1 = 1,
+  SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
+  SADAH_SPECIAL_0_OPCODE_X0 = 59,
+  SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
+  SADB_U_SPECIAL_0_OPCODE_X0 = 61,
+  SADH_SPECIAL_0_OPCODE_X0 = 62,
+  SADH_U_SPECIAL_0_OPCODE_X0 = 63,
+  SBADD_IMM_0_OPCODE_X1 = 28,
+  SB_OPCODE_Y2 = 5,
+  SB_SPECIAL_0_OPCODE_X1 = 32,
+  SEQB_SPECIAL_0_OPCODE_X0 = 64,
+  SEQB_SPECIAL_0_OPCODE_X1 = 33,
+  SEQH_SPECIAL_0_OPCODE_X0 = 65,
+  SEQH_SPECIAL_0_OPCODE_X1 = 34,
+  SEQIB_IMM_0_OPCODE_X0 = 9,
+  SEQIB_IMM_0_OPCODE_X1 = 12,
+  SEQIH_IMM_0_OPCODE_X0 = 10,
+  SEQIH_IMM_0_OPCODE_X1 = 13,
+  SEQI_IMM_0_OPCODE_X0 = 11,
+  SEQI_IMM_0_OPCODE_X1 = 14,
+  SEQI_OPCODE_Y0 = 12,
+  SEQI_OPCODE_Y1 = 10,
+  SEQ_SPECIAL_0_OPCODE_X0 = 66,
+  SEQ_SPECIAL_0_OPCODE_X1 = 35,
+  SEQ_SPECIAL_5_OPCODE_Y0 = 2,
+  SEQ_SPECIAL_5_OPCODE_Y1 = 2,
+  SHADD_IMM_0_OPCODE_X1 = 29,
+  SHL8II_IMM_0_OPCODE_SN = 3,
+  SHLB_SPECIAL_0_OPCODE_X0 = 67,
+  SHLB_SPECIAL_0_OPCODE_X1 = 36,
+  SHLH_SPECIAL_0_OPCODE_X0 = 68,
+  SHLH_SPECIAL_0_OPCODE_X1 = 37,
+  SHLIB_SHUN_0_OPCODE_X0 = 2,
+  SHLIB_SHUN_0_OPCODE_X1 = 2,
+  SHLIH_SHUN_0_OPCODE_X0 = 3,
+  SHLIH_SHUN_0_OPCODE_X1 = 3,
+  SHLI_SHUN_0_OPCODE_X0 = 4,
+  SHLI_SHUN_0_OPCODE_X1 = 4,
+  SHLI_SHUN_0_OPCODE_Y0 = 2,
+  SHLI_SHUN_0_OPCODE_Y1 = 2,
+  SHL_SPECIAL_0_OPCODE_X0 = 69,
+  SHL_SPECIAL_0_OPCODE_X1 = 38,
+  SHL_SPECIAL_3_OPCODE_Y0 = 1,
+  SHL_SPECIAL_3_OPCODE_Y1 = 1,
+  SHR1_RR_IMM_0_OPCODE_SN = 9,
+  SHRB_SPECIAL_0_OPCODE_X0 = 70,
+  SHRB_SPECIAL_0_OPCODE_X1 = 39,
+  SHRH_SPECIAL_0_OPCODE_X0 = 71,
+  SHRH_SPECIAL_0_OPCODE_X1 = 40,
+  SHRIB_SHUN_0_OPCODE_X0 = 5,
+  SHRIB_SHUN_0_OPCODE_X1 = 5,
+  SHRIH_SHUN_0_OPCODE_X0 = 6,
+  SHRIH_SHUN_0_OPCODE_X1 = 6,
+  SHRI_SHUN_0_OPCODE_X0 = 7,
+  SHRI_SHUN_0_OPCODE_X1 = 7,
+  SHRI_SHUN_0_OPCODE_Y0 = 3,
+  SHRI_SHUN_0_OPCODE_Y1 = 3,
+  SHR_SPECIAL_0_OPCODE_X0 = 72,
+  SHR_SPECIAL_0_OPCODE_X1 = 41,
+  SHR_SPECIAL_3_OPCODE_Y0 = 2,
+  SHR_SPECIAL_3_OPCODE_Y1 = 2,
+  SHUN_0_OPCODE_X0 = 7,
+  SHUN_0_OPCODE_X1 = 8,
+  SHUN_0_OPCODE_Y0 = 13,
+  SHUN_0_OPCODE_Y1 = 11,
+  SH_OPCODE_Y2 = 6,
+  SH_SPECIAL_0_OPCODE_X1 = 42,
+  SLTB_SPECIAL_0_OPCODE_X0 = 73,
+  SLTB_SPECIAL_0_OPCODE_X1 = 43,
+  SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
+  SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
+  SLTEB_SPECIAL_0_OPCODE_X0 = 75,
+  SLTEB_SPECIAL_0_OPCODE_X1 = 45,
+  SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
+  SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
+  SLTEH_SPECIAL_0_OPCODE_X0 = 77,
+  SLTEH_SPECIAL_0_OPCODE_X1 = 47,
+  SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
+  SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
+  SLTE_SPECIAL_0_OPCODE_X0 = 79,
+  SLTE_SPECIAL_0_OPCODE_X1 = 49,
+  SLTE_SPECIAL_4_OPCODE_Y0 = 0,
+  SLTE_SPECIAL_4_OPCODE_Y1 = 0,
+  SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
+  SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
+  SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
+  SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
+  SLTH_SPECIAL_0_OPCODE_X0 = 81,
+  SLTH_SPECIAL_0_OPCODE_X1 = 51,
+  SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
+  SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
+  SLTIB_IMM_0_OPCODE_X0 = 12,
+  SLTIB_IMM_0_OPCODE_X1 = 15,
+  SLTIB_U_IMM_0_OPCODE_X0 = 13,
+  SLTIB_U_IMM_0_OPCODE_X1 = 16,
+  SLTIH_IMM_0_OPCODE_X0 = 14,
+  SLTIH_IMM_0_OPCODE_X1 = 17,
+  SLTIH_U_IMM_0_OPCODE_X0 = 15,
+  SLTIH_U_IMM_0_OPCODE_X1 = 18,
+  SLTI_IMM_0_OPCODE_X0 = 16,
+  SLTI_IMM_0_OPCODE_X1 = 19,
+  SLTI_OPCODE_Y0 = 14,
+  SLTI_OPCODE_Y1 = 12,
+  SLTI_U_IMM_0_OPCODE_X0 = 17,
+  SLTI_U_IMM_0_OPCODE_X1 = 20,
+  SLTI_U_OPCODE_Y0 = 15,
+  SLTI_U_OPCODE_Y1 = 13,
+  SLT_SPECIAL_0_OPCODE_X0 = 83,
+  SLT_SPECIAL_0_OPCODE_X1 = 53,
+  SLT_SPECIAL_4_OPCODE_Y0 = 2,
+  SLT_SPECIAL_4_OPCODE_Y1 = 2,
+  SLT_U_SPECIAL_0_OPCODE_X0 = 84,
+  SLT_U_SPECIAL_0_OPCODE_X1 = 54,
+  SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
+  SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
+  SNEB_SPECIAL_0_OPCODE_X0 = 85,
+  SNEB_SPECIAL_0_OPCODE_X1 = 55,
+  SNEH_SPECIAL_0_OPCODE_X0 = 86,
+  SNEH_SPECIAL_0_OPCODE_X1 = 56,
+  SNE_SPECIAL_0_OPCODE_X0 = 87,
+  SNE_SPECIAL_0_OPCODE_X1 = 57,
+  SNE_SPECIAL_5_OPCODE_Y0 = 3,
+  SNE_SPECIAL_5_OPCODE_Y1 = 3,
+  SPECIAL_0_OPCODE_X0 = 0,
+  SPECIAL_0_OPCODE_X1 = 1,
+  SPECIAL_0_OPCODE_Y0 = 1,
+  SPECIAL_0_OPCODE_Y1 = 1,
+  SPECIAL_1_OPCODE_Y0 = 2,
+  SPECIAL_1_OPCODE_Y1 = 2,
+  SPECIAL_2_OPCODE_Y0 = 3,
+  SPECIAL_2_OPCODE_Y1 = 3,
+  SPECIAL_3_OPCODE_Y0 = 4,
+  SPECIAL_3_OPCODE_Y1 = 4,
+  SPECIAL_4_OPCODE_Y0 = 5,
+  SPECIAL_4_OPCODE_Y1 = 5,
+  SPECIAL_5_OPCODE_Y0 = 6,
+  SPECIAL_5_OPCODE_Y1 = 6,
+  SPECIAL_6_OPCODE_Y0 = 7,
+  SPECIAL_7_OPCODE_Y0 = 8,
+  SRAB_SPECIAL_0_OPCODE_X0 = 88,
+  SRAB_SPECIAL_0_OPCODE_X1 = 58,
+  SRAH_SPECIAL_0_OPCODE_X0 = 89,
+  SRAH_SPECIAL_0_OPCODE_X1 = 59,
+  SRAIB_SHUN_0_OPCODE_X0 = 8,
+  SRAIB_SHUN_0_OPCODE_X1 = 8,
+  SRAIH_SHUN_0_OPCODE_X0 = 9,
+  SRAIH_SHUN_0_OPCODE_X1 = 9,
+  SRAI_SHUN_0_OPCODE_X0 = 10,
+  SRAI_SHUN_0_OPCODE_X1 = 10,
+  SRAI_SHUN_0_OPCODE_Y0 = 4,
+  SRAI_SHUN_0_OPCODE_Y1 = 4,
+  SRA_SPECIAL_0_OPCODE_X0 = 90,
+  SRA_SPECIAL_0_OPCODE_X1 = 60,
+  SRA_SPECIAL_3_OPCODE_Y0 = 3,
+  SRA_SPECIAL_3_OPCODE_Y1 = 3,
+  SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
+  SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
+  SUBB_SPECIAL_0_OPCODE_X0 = 91,
+  SUBB_SPECIAL_0_OPCODE_X1 = 61,
+  SUBHS_SPECIAL_0_OPCODE_X0 = 101,
+  SUBHS_SPECIAL_0_OPCODE_X1 = 71,
+  SUBH_SPECIAL_0_OPCODE_X0 = 92,
+  SUBH_SPECIAL_0_OPCODE_X1 = 62,
+  SUBS_SPECIAL_0_OPCODE_X0 = 97,
+  SUBS_SPECIAL_0_OPCODE_X1 = 67,
+  SUB_SPECIAL_0_OPCODE_X0 = 93,
+  SUB_SPECIAL_0_OPCODE_X1 = 63,
+  SUB_SPECIAL_0_OPCODE_Y0 = 3,
+  SUB_SPECIAL_0_OPCODE_Y1 = 3,
+  SWADD_IMM_0_OPCODE_X1 = 30,
+  SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
+  SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
+  SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
+  SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
+  SW_OPCODE_Y2 = 7,
+  SW_SPECIAL_0_OPCODE_X1 = 64,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
+  TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
+  UN_0_SHUN_0_OPCODE_X0 = 11,
+  UN_0_SHUN_0_OPCODE_X1 = 11,
+  UN_0_SHUN_0_OPCODE_Y0 = 5,
+  UN_0_SHUN_0_OPCODE_Y1 = 5,
+  WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
+  XORI_IMM_0_OPCODE_X0 = 2,
+  XORI_IMM_0_OPCODE_X1 = 21,
+  XOR_SPECIAL_0_OPCODE_X0 = 94,
+  XOR_SPECIAL_0_OPCODE_X1 = 65,
+  XOR_SPECIAL_2_OPCODE_Y0 = 3,
+  XOR_SPECIAL_2_OPCODE_Y1 = 3
+};
+
+#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/opcode_constants_64.h b/arch/tile/include/asm/opcode_constants_64.h
new file mode 100644
index 00000000000..227d033b180
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants_64.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+
+
+#ifndef _TILE_OPCODE_CONSTANTS_H
+#define _TILE_OPCODE_CONSTANTS_H
+enum
+{
+  ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
+  ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
+  ADDB_SPECIAL_0_OPCODE_X0 = 1,
+  ADDB_SPECIAL_0_OPCODE_X1 = 1,
+  ADDHS_SPECIAL_0_OPCODE_X0 = 99,
+  ADDHS_SPECIAL_0_OPCODE_X1 = 69,
+  ADDH_SPECIAL_0_OPCODE_X0 = 2,
+  ADDH_SPECIAL_0_OPCODE_X1 = 2,
+  ADDIB_IMM_0_OPCODE_X0 = 1,
+  ADDIB_IMM_0_OPCODE_X1 = 1,
+  ADDIH_IMM_0_OPCODE_X0 = 2,
+  ADDIH_IMM_0_OPCODE_X1 = 2,
+  ADDI_IMM_0_OPCODE_X0 = 3,
+  ADDI_IMM_0_OPCODE_X1 = 3,
+  ADDI_IMM_1_OPCODE_SN = 1,
+  ADDI_OPCODE_Y0 = 9,
+  ADDI_OPCODE_Y1 = 7,
+  ADDLIS_OPCODE_X0 = 1,
+  ADDLIS_OPCODE_X1 = 2,
+  ADDLI_OPCODE_X0 = 2,
+  ADDLI_OPCODE_X1 = 3,
+  ADDS_SPECIAL_0_OPCODE_X0 = 96,
+  ADDS_SPECIAL_0_OPCODE_X1 = 66,
+  ADD_SPECIAL_0_OPCODE_X0 = 3,
+  ADD_SPECIAL_0_OPCODE_X1 = 3,
+  ADD_SPECIAL_0_OPCODE_Y0 = 0,
+  ADD_SPECIAL_0_OPCODE_Y1 = 0,
+  ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
+  ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
+  ANDI_IMM_0_OPCODE_X0 = 1,
+  ANDI_IMM_0_OPCODE_X1 = 4,
+  ANDI_OPCODE_Y0 = 10,
+  ANDI_OPCODE_Y1 = 8,
+  AND_SPECIAL_0_OPCODE_X0 = 6,
+  AND_SPECIAL_0_OPCODE_X1 = 4,
+  AND_SPECIAL_2_OPCODE_Y0 = 0,
+  AND_SPECIAL_2_OPCODE_Y1 = 0,
+  AULI_OPCODE_X0 = 3,
+  AULI_OPCODE_X1 = 4,
+  AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
+  AVGH_SPECIAL_0_OPCODE_X0 = 8,
+  BBNST_BRANCH_OPCODE_X1 = 15,
+  BBNS_BRANCH_OPCODE_X1 = 14,
+  BBNS_OPCODE_SN = 63,
+  BBST_BRANCH_OPCODE_X1 = 13,
+  BBS_BRANCH_OPCODE_X1 = 12,
+  BBS_OPCODE_SN = 62,
+  BGEZT_BRANCH_OPCODE_X1 = 7,
+  BGEZ_BRANCH_OPCODE_X1 = 6,
+  BGEZ_OPCODE_SN = 61,
+  BGZT_BRANCH_OPCODE_X1 = 5,
+  BGZ_BRANCH_OPCODE_X1 = 4,
+  BGZ_OPCODE_SN = 58,
+  BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
+  BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
+  BLEZT_BRANCH_OPCODE_X1 = 11,
+  BLEZ_BRANCH_OPCODE_X1 = 10,
+  BLEZ_OPCODE_SN = 59,
+  BLZT_BRANCH_OPCODE_X1 = 9,
+  BLZ_BRANCH_OPCODE_X1 = 8,
+  BLZ_OPCODE_SN = 60,
+  BNZT_BRANCH_OPCODE_X1 = 3,
+  BNZ_BRANCH_OPCODE_X1 = 2,
+  BNZ_OPCODE_SN = 57,
+  BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
+  BRANCH_OPCODE_X1 = 5,
+  BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
+  BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
+  BZT_BRANCH_OPCODE_X1 = 1,
+  BZ_BRANCH_OPCODE_X1 = 0,
+  BZ_OPCODE_SN = 56,
+  CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
+  CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
+  CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
+  CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
+  CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
+  CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
+  DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
+  DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
+  DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
+  FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
+  FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
+  FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
+  FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
+  FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
+  HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
+  ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
+  ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
+  ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
+  IMM_0_OPCODE_SN = 0,
+  IMM_0_OPCODE_X0 = 4,
+  IMM_0_OPCODE_X1 = 6,
+  IMM_1_OPCODE_SN = 1,
+  IMM_OPCODE_0_X0 = 5,
+  INTHB_SPECIAL_0_OPCODE_X0 = 11,
+  INTHB_SPECIAL_0_OPCODE_X1 = 5,
+  INTHH_SPECIAL_0_OPCODE_X0 = 12,
+  INTHH_SPECIAL_0_OPCODE_X1 = 6,
+  INTLB_SPECIAL_0_OPCODE_X0 = 13,
+  INTLB_SPECIAL_0_OPCODE_X1 = 7,
+  INTLH_SPECIAL_0_OPCODE_X0 = 14,
+  INTLH_SPECIAL_0_OPCODE_X1 = 8,
+  INV_UN_0_SHUN_0_OPCODE_X1 = 8,
+  IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
+  JALB_OPCODE_X1 = 13,
+  JALF_OPCODE_X1 = 12,
+  JALRP_SPECIAL_0_OPCODE_X1 = 9,
+  JALRR_IMM_1_OPCODE_SN = 3,
+  JALR_RR_IMM_0_OPCODE_SN = 5,
+  JALR_SPECIAL_0_OPCODE_X1 = 10,
+  JB_OPCODE_X1 = 11,
+  JF_OPCODE_X1 = 10,
+  JRP_SPECIAL_0_OPCODE_X1 = 11,
+  JRR_IMM_1_OPCODE_SN = 2,
+  JR_RR_IMM_0_OPCODE_SN = 4,
+  JR_SPECIAL_0_OPCODE_X1 = 12,
+  LBADD_IMM_0_OPCODE_X1 = 22,
+  LBADD_U_IMM_0_OPCODE_X1 = 23,
+  LB_OPCODE_Y2 = 0,
+  LB_UN_0_SHUN_0_OPCODE_X1 = 10,
+  LB_U_OPCODE_Y2 = 1,
+  LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
+  LHADD_IMM_0_OPCODE_X1 = 24,
+  LHADD_U_IMM_0_OPCODE_X1 = 25,
+  LH_OPCODE_Y2 = 2,
+  LH_UN_0_SHUN_0_OPCODE_X1 = 12,
+  LH_U_OPCODE_Y2 = 3,
+  LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
+  LNK_SPECIAL_0_OPCODE_X1 = 13,
+  LWADD_IMM_0_OPCODE_X1 = 26,
+  LWADD_NA_IMM_0_OPCODE_X1 = 27,
+  LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
+  LW_OPCODE_Y2 = 4,
+  LW_UN_0_SHUN_0_OPCODE_X1 = 14,
+  MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
+  MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
+  MAXH_SPECIAL_0_OPCODE_X0 = 16,
+  MAXH_SPECIAL_0_OPCODE_X1 = 15,
+  MAXIB_U_IMM_0_OPCODE_X0 = 4,
+  MAXIB_U_IMM_0_OPCODE_X1 = 5,
+  MAXIH_IMM_0_OPCODE_X0 = 5,
+  MAXIH_IMM_0_OPCODE_X1 = 6,
+  MFSPR_IMM_0_OPCODE_X1 = 7,
+  MF_UN_0_SHUN_0_OPCODE_X1 = 15,
+  MINB_U_SPECIAL_0_OPCODE_X0 = 17,
+  MINB_U_SPECIAL_0_OPCODE_X1 = 16,
+  MINH_SPECIAL_0_OPCODE_X0 = 18,
+  MINH_SPECIAL_0_OPCODE_X1 = 17,
+  MINIB_U_IMM_0_OPCODE_X0 = 6,
+  MINIB_U_IMM_0_OPCODE_X1 = 8,
+  MINIH_IMM_0_OPCODE_X0 = 7,
+  MINIH_IMM_0_OPCODE_X1 = 9,
+  MM_OPCODE_X0 = 6,
+  MM_OPCODE_X1 = 7,
+  MNZB_SPECIAL_0_OPCODE_X0 = 19,
+  MNZB_SPECIAL_0_OPCODE_X1 = 18,
+  MNZH_SPECIAL_0_OPCODE_X0 = 20,
+  MNZH_SPECIAL_0_OPCODE_X1 = 19,
+  MNZ_SPECIAL_0_OPCODE_X0 = 21,
+  MNZ_SPECIAL_0_OPCODE_X1 = 20,
+  MNZ_SPECIAL_1_OPCODE_Y0 = 0,
+  MNZ_SPECIAL_1_OPCODE_Y1 = 1,
+  MOVEI_IMM_1_OPCODE_SN = 0,
+  MOVE_RR_IMM_0_OPCODE_SN = 8,
+  MTSPR_IMM_0_OPCODE_X1 = 10,
+  MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
+  MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
+  MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
+  MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
+  MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
+  MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
+  MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
+  MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
+  MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
+  MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
+  MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
+  MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
+  MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
+  MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
+  MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
+  MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
+  MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
+  MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
+  MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
+  MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
+  MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
+  MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
+  MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
+  MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
+  MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
+  MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
+  MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
+  MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
+  MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
+  MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
+  MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
+  MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
+  MVNZ_SPECIAL_0_OPCODE_X0 = 45,
+  MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
+  MVZ_SPECIAL_0_OPCODE_X0 = 46,
+  MVZ_SPECIAL_1_OPCODE_Y0 = 2,
+  MZB_SPECIAL_0_OPCODE_X0 = 47,
+  MZB_SPECIAL_0_OPCODE_X1 = 21,
+  MZH_SPECIAL_0_OPCODE_X0 = 48,
+  MZH_SPECIAL_0_OPCODE_X1 = 22,
+  MZ_SPECIAL_0_OPCODE_X0 = 49,
+  MZ_SPECIAL_0_OPCODE_X1 = 23,
+  MZ_SPECIAL_1_OPCODE_Y0 = 3,
+  MZ_SPECIAL_1_OPCODE_Y1 = 2,
+  NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
+  NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
+  NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
+  NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
+  NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
+  NOREG_RR_IMM_0_OPCODE_SN = 0,
+  NOR_SPECIAL_0_OPCODE_X0 = 50,
+  NOR_SPECIAL_0_OPCODE_X1 = 24,
+  NOR_SPECIAL_2_OPCODE_Y0 = 1,
+  NOR_SPECIAL_2_OPCODE_Y1 = 1,
+  ORI_IMM_0_OPCODE_X0 = 8,
+  ORI_IMM_0_OPCODE_X1 = 11,
+  ORI_OPCODE_Y0 = 11,
+  ORI_OPCODE_Y1 = 9,
+  OR_SPECIAL_0_OPCODE_X0 = 51,
+  OR_SPECIAL_0_OPCODE_X1 = 25,
+  OR_SPECIAL_2_OPCODE_Y0 = 2,
+  OR_SPECIAL_2_OPCODE_Y1 = 2,
+  PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
+  PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
+  PACKHB_SPECIAL_0_OPCODE_X0 = 52,
+  PACKHB_SPECIAL_0_OPCODE_X1 = 26,
+  PACKHS_SPECIAL_0_OPCODE_X0 = 102,
+  PACKHS_SPECIAL_0_OPCODE_X1 = 72,
+  PACKLB_SPECIAL_0_OPCODE_X0 = 53,
+  PACKLB_SPECIAL_0_OPCODE_X1 = 27,
+  PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
+  PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
+  RLI_SHUN_0_OPCODE_X0 = 1,
+  RLI_SHUN_0_OPCODE_X1 = 1,
+  RLI_SHUN_0_OPCODE_Y0 = 1,
+  RLI_SHUN_0_OPCODE_Y1 = 1,
+  RL_SPECIAL_0_OPCODE_X0 = 54,
+  RL_SPECIAL_0_OPCODE_X1 = 28,
+  RL_SPECIAL_3_OPCODE_Y0 = 0,
+  RL_SPECIAL_3_OPCODE_Y1 = 0,
+  RR_IMM_0_OPCODE_SN = 0,
+  S1A_SPECIAL_0_OPCODE_X0 = 55,
+  S1A_SPECIAL_0_OPCODE_X1 = 29,
+  S1A_SPECIAL_0_OPCODE_Y0 = 1,
+  S1A_SPECIAL_0_OPCODE_Y1 = 1,
+  S2A_SPECIAL_0_OPCODE_X0 = 56,
+  S2A_SPECIAL_0_OPCODE_X1 = 30,
+  S2A_SPECIAL_0_OPCODE_Y0 = 2,
+  S2A_SPECIAL_0_OPCODE_Y1 = 2,
+  S3A_SPECIAL_0_OPCODE_X0 = 57,
+  S3A_SPECIAL_0_OPCODE_X1 = 31,
+  S3A_SPECIAL_5_OPCODE_Y0 = 1,
+  S3A_SPECIAL_5_OPCODE_Y1 = 1,
+  SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
+  SADAH_SPECIAL_0_OPCODE_X0 = 59,
+  SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
+  SADB_U_SPECIAL_0_OPCODE_X0 = 61,
+  SADH_SPECIAL_0_OPCODE_X0 = 62,
+  SADH_U_SPECIAL_0_OPCODE_X0 = 63,
+  SBADD_IMM_0_OPCODE_X1 = 28,
+  SB_OPCODE_Y2 = 5,
+  SB_SPECIAL_0_OPCODE_X1 = 32,
+  SEQB_SPECIAL_0_OPCODE_X0 = 64,
+  SEQB_SPECIAL_0_OPCODE_X1 = 33,
+  SEQH_SPECIAL_0_OPCODE_X0 = 65,
+  SEQH_SPECIAL_0_OPCODE_X1 = 34,
+  SEQIB_IMM_0_OPCODE_X0 = 9,
+  SEQIB_IMM_0_OPCODE_X1 = 12,
+  SEQIH_IMM_0_OPCODE_X0 = 10,
+  SEQIH_IMM_0_OPCODE_X1 = 13,
+  SEQI_IMM_0_OPCODE_X0 = 11,
+  SEQI_IMM_0_OPCODE_X1 = 14,
+  SEQI_OPCODE_Y0 = 12,
+  SEQI_OPCODE_Y1 = 10,
+  SEQ_SPECIAL_0_OPCODE_X0 = 66,
+  SEQ_SPECIAL_0_OPCODE_X1 = 35,
+  SEQ_SPECIAL_5_OPCODE_Y0 = 2,
+  SEQ_SPECIAL_5_OPCODE_Y1 = 2,
+  SHADD_IMM_0_OPCODE_X1 = 29,
+  SHL8II_IMM_0_OPCODE_SN = 3,
+  SHLB_SPECIAL_0_OPCODE_X0 = 67,
+  SHLB_SPECIAL_0_OPCODE_X1 = 36,
+  SHLH_SPECIAL_0_OPCODE_X0 = 68,
+  SHLH_SPECIAL_0_OPCODE_X1 = 37,
+  SHLIB_SHUN_0_OPCODE_X0 = 2,
+  SHLIB_SHUN_0_OPCODE_X1 = 2,
+  SHLIH_SHUN_0_OPCODE_X0 = 3,
+  SHLIH_SHUN_0_OPCODE_X1 = 3,
+  SHLI_SHUN_0_OPCODE_X0 = 4,
+  SHLI_SHUN_0_OPCODE_X1 = 4,
+  SHLI_SHUN_0_OPCODE_Y0 = 2,
+  SHLI_SHUN_0_OPCODE_Y1 = 2,
+  SHL_SPECIAL_0_OPCODE_X0 = 69,
+  SHL_SPECIAL_0_OPCODE_X1 = 38,
+  SHL_SPECIAL_3_OPCODE_Y0 = 1,
+  SHL_SPECIAL_3_OPCODE_Y1 = 1,
+  SHR1_RR_IMM_0_OPCODE_SN = 9,
+  SHRB_SPECIAL_0_OPCODE_X0 = 70,
+  SHRB_SPECIAL_0_OPCODE_X1 = 39,
+  SHRH_SPECIAL_0_OPCODE_X0 = 71,
+  SHRH_SPECIAL_0_OPCODE_X1 = 40,
+  SHRIB_SHUN_0_OPCODE_X0 = 5,
+  SHRIB_SHUN_0_OPCODE_X1 = 5,
+  SHRIH_SHUN_0_OPCODE_X0 = 6,
+  SHRIH_SHUN_0_OPCODE_X1 = 6,
+  SHRI_SHUN_0_OPCODE_X0 = 7,
+  SHRI_SHUN_0_OPCODE_X1 = 7,
+  SHRI_SHUN_0_OPCODE_Y0 = 3,
+  SHRI_SHUN_0_OPCODE_Y1 = 3,
+  SHR_SPECIAL_0_OPCODE_X0 = 72,
+  SHR_SPECIAL_0_OPCODE_X1 = 41,
+  SHR_SPECIAL_3_OPCODE_Y0 = 2,
+  SHR_SPECIAL_3_OPCODE_Y1 = 2,
+  SHUN_0_OPCODE_X0 = 7,
+  SHUN_0_OPCODE_X1 = 8,
+  SHUN_0_OPCODE_Y0 = 13,
+  SHUN_0_OPCODE_Y1 = 11,
+  SH_OPCODE_Y2 = 6,
+  SH_SPECIAL_0_OPCODE_X1 = 42,
+  SLTB_SPECIAL_0_OPCODE_X0 = 73,
+  SLTB_SPECIAL_0_OPCODE_X1 = 43,
+  SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
+  SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
+  SLTEB_SPECIAL_0_OPCODE_X0 = 75,
+  SLTEB_SPECIAL_0_OPCODE_X1 = 45,
+  SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
+  SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
+  SLTEH_SPECIAL_0_OPCODE_X0 = 77,
+  SLTEH_SPECIAL_0_OPCODE_X1 = 47,
+  SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
+  SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
+  SLTE_SPECIAL_0_OPCODE_X0 = 79,
+  SLTE_SPECIAL_0_OPCODE_X1 = 49,
+  SLTE_SPECIAL_4_OPCODE_Y0 = 0,
+  SLTE_SPECIAL_4_OPCODE_Y1 = 0,
+  SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
+  SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
+  SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
+  SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
+  SLTH_SPECIAL_0_OPCODE_X0 = 81,
+  SLTH_SPECIAL_0_OPCODE_X1 = 51,
+  SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
+  SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
+  SLTIB_IMM_0_OPCODE_X0 = 12,
+  SLTIB_IMM_0_OPCODE_X1 = 15,
+  SLTIB_U_IMM_0_OPCODE_X0 = 13,
+  SLTIB_U_IMM_0_OPCODE_X1 = 16,
+  SLTIH_IMM_0_OPCODE_X0 = 14,
+  SLTIH_IMM_0_OPCODE_X1 = 17,
+  SLTIH_U_IMM_0_OPCODE_X0 = 15,
+  SLTIH_U_IMM_0_OPCODE_X1 = 18,
+  SLTI_IMM_0_OPCODE_X0 = 16,
+  SLTI_IMM_0_OPCODE_X1 = 19,
+  SLTI_OPCODE_Y0 = 14,
+  SLTI_OPCODE_Y1 = 12,
+  SLTI_U_IMM_0_OPCODE_X0 = 17,
+  SLTI_U_IMM_0_OPCODE_X1 = 20,
+  SLTI_U_OPCODE_Y0 = 15,
+  SLTI_U_OPCODE_Y1 = 13,
+  SLT_SPECIAL_0_OPCODE_X0 = 83,
+  SLT_SPECIAL_0_OPCODE_X1 = 53,
+  SLT_SPECIAL_4_OPCODE_Y0 = 2,
+  SLT_SPECIAL_4_OPCODE_Y1 = 2,
+  SLT_U_SPECIAL_0_OPCODE_X0 = 84,
+  SLT_U_SPECIAL_0_OPCODE_X1 = 54,
+  SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
+  SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
+  SNEB_SPECIAL_0_OPCODE_X0 = 85,
+  SNEB_SPECIAL_0_OPCODE_X1 = 55,
+  SNEH_SPECIAL_0_OPCODE_X0 = 86,
+  SNEH_SPECIAL_0_OPCODE_X1 = 56,
+  SNE_SPECIAL_0_OPCODE_X0 = 87,
+  SNE_SPECIAL_0_OPCODE_X1 = 57,
+  SNE_SPECIAL_5_OPCODE_Y0 = 3,
+  SNE_SPECIAL_5_OPCODE_Y1 = 3,
+  SPECIAL_0_OPCODE_X0 = 0,
+  SPECIAL_0_OPCODE_X1 = 1,
+  SPECIAL_0_OPCODE_Y0 = 1,
+  SPECIAL_0_OPCODE_Y1 = 1,
+  SPECIAL_1_OPCODE_Y0 = 2,
+  SPECIAL_1_OPCODE_Y1 = 2,
+  SPECIAL_2_OPCODE_Y0 = 3,
+  SPECIAL_2_OPCODE_Y1 = 3,
+  SPECIAL_3_OPCODE_Y0 = 4,
+  SPECIAL_3_OPCODE_Y1 = 4,
+  SPECIAL_4_OPCODE_Y0 = 5,
+  SPECIAL_4_OPCODE_Y1 = 5,
+  SPECIAL_5_OPCODE_Y0 = 6,
+  SPECIAL_5_OPCODE_Y1 = 6,
+  SPECIAL_6_OPCODE_Y0 = 7,
+  SPECIAL_7_OPCODE_Y0 = 8,
+  SRAB_SPECIAL_0_OPCODE_X0 = 88,
+  SRAB_SPECIAL_0_OPCODE_X1 = 58,
+  SRAH_SPECIAL_0_OPCODE_X0 = 89,
+  SRAH_SPECIAL_0_OPCODE_X1 = 59,
+  SRAIB_SHUN_0_OPCODE_X0 = 8,
+  SRAIB_SHUN_0_OPCODE_X1 = 8,
+  SRAIH_SHUN_0_OPCODE_X0 = 9,
+  SRAIH_SHUN_0_OPCODE_X1 = 9,
+  SRAI_SHUN_0_OPCODE_X0 = 10,
+  SRAI_SHUN_0_OPCODE_X1 = 10,
+  SRAI_SHUN_0_OPCODE_Y0 = 4,
+  SRAI_SHUN_0_OPCODE_Y1 = 4,
+  SRA_SPECIAL_0_OPCODE_X0 = 90,
+  SRA_SPECIAL_0_OPCODE_X1 = 60,
+  SRA_SPECIAL_3_OPCODE_Y0 = 3,
+  SRA_SPECIAL_3_OPCODE_Y1 = 3,
+  SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
+  SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
+  SUBB_SPECIAL_0_OPCODE_X0 = 91,
+  SUBB_SPECIAL_0_OPCODE_X1 = 61,
+  SUBHS_SPECIAL_0_OPCODE_X0 = 101,
+  SUBHS_SPECIAL_0_OPCODE_X1 = 71,
+  SUBH_SPECIAL_0_OPCODE_X0 = 92,
+  SUBH_SPECIAL_0_OPCODE_X1 = 62,
+  SUBS_SPECIAL_0_OPCODE_X0 = 97,
+  SUBS_SPECIAL_0_OPCODE_X1 = 67,
+  SUB_SPECIAL_0_OPCODE_X0 = 93,
+  SUB_SPECIAL_0_OPCODE_X1 = 63,
+  SUB_SPECIAL_0_OPCODE_Y0 = 3,
+  SUB_SPECIAL_0_OPCODE_Y1 = 3,
+  SWADD_IMM_0_OPCODE_X1 = 30,
+  SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
+  SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
+  SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
+  SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
+  SW_OPCODE_Y2 = 7,
+  SW_SPECIAL_0_OPCODE_X1 = 64,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
+  TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
+  TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
+  TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
+  TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
+  TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
+  UN_0_SHUN_0_OPCODE_X0 = 11,
+  UN_0_SHUN_0_OPCODE_X1 = 11,
+  UN_0_SHUN_0_OPCODE_Y0 = 5,
+  UN_0_SHUN_0_OPCODE_Y1 = 5,
+  WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
+  XORI_IMM_0_OPCODE_X0 = 2,
+  XORI_IMM_0_OPCODE_X1 = 21,
+  XOR_SPECIAL_0_OPCODE_X0 = 94,
+  XOR_SPECIAL_0_OPCODE_X1 = 65,
+  XOR_SPECIAL_2_OPCODE_Y0 = 3,
+  XOR_SPECIAL_2_OPCODE_Y1 = 3
+};
+
+#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
new file mode 100644
index 00000000000..f894a9016da
--- /dev/null
+++ b/arch/tile/include/asm/page.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PAGE_H
+#define _ASM_TILE_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
+#define PAGE_SHIFT	16
+#define HPAGE_SHIFT	24
+
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define HPAGE_SIZE	(_AC(1, UL) << HPAGE_SHIFT)
+
+#define PAGE_MASK	(~(PAGE_SIZE - 1))
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+
+#ifdef __KERNEL__
+
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+/*
+ * The {,H}PAGE_SHIFT values must match the HV_LOG2_PAGE_SIZE_xxx
+ * definitions in <hv/hypervisor.h>.  We validate this at build time
+ * here, and again at runtime during early boot.  We provide a
+ * separate definition since userspace doesn't have <hv/hypervisor.h>.
+ *
+ * Be careful to distinguish PAGE_SHIFT from HV_PTE_INDEX_PFN, since
+ * they are the same on i386 but not TILE.
+ */
+#if HV_LOG2_PAGE_SIZE_SMALL != PAGE_SHIFT
+# error Small page size mismatch in Linux
+#endif
+#if HV_LOG2_PAGE_SIZE_LARGE != HPAGE_SHIFT
+# error Huge page size mismatch in Linux
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+struct page;
+
+static inline void clear_page(void *page)
+{
+	memset(page, 0, PAGE_SIZE);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	memcpy(to, from, PAGE_SIZE);
+}
+
+static inline void clear_user_page(void *page, unsigned long vaddr,
+				struct page *pg)
+{
+	clear_page(page);
+}
+
+static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
+				struct page *topage)
+{
+	copy_page(to, from);
+}
+
+/*
+ * Hypervisor page tables are made of the same basic structure.
+ */
+
+typedef __u64 pteval_t;
+typedef __u64 pmdval_t;
+typedef __u64 pudval_t;
+typedef __u64 pgdval_t;
+typedef __u64 pgprotval_t;
+
+typedef HV_PTE pte_t;
+typedef HV_PTE pgd_t;
+typedef HV_PTE pgprot_t;
+
+/*
+ * User L2 page tables are managed as one L2 page table per page,
+ * because we use the page allocator for them.  This keeps the allocation
+ * simple and makes it potentially useful to implement HIGHPTE at some point.
+ * However, it's also inefficient, since L2 page tables are much smaller
+ * than pages (currently 2KB vs 64KB).  So we should revisit this.
+ */
+typedef struct page *pgtable_t;
+
+/* Must be a macro since it is used to create constants. */
+#define __pgprot(val) hv_pte(val)
+
+static inline u64 pgprot_val(pgprot_t pgprot)
+{
+	return hv_pte_val(pgprot);
+}
+
+static inline u64 pte_val(pte_t pte)
+{
+	return hv_pte_val(pte);
+}
+
+static inline u64 pgd_val(pgd_t pgd)
+{
+	return hv_pte_val(pgd);
+}
+
+#ifdef __tilegx__
+
+typedef HV_PTE pmd_t;
+
+static inline u64 pmd_val(pmd_t pmd)
+{
+	return hv_pte_val(pmd);
+}
+
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE		2
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+/* Each memory controller has PAs distinct in their high bits. */
+#define NR_PA_HIGHBIT_SHIFT (CHIP_PA_WIDTH() - CHIP_LOG_NUM_MSHIMS())
+#define NR_PA_HIGHBIT_VALUES (1 << CHIP_LOG_NUM_MSHIMS())
+#define __pa_to_highbits(pa) ((phys_addr_t)(pa) >> NR_PA_HIGHBIT_SHIFT)
+#define __pfn_to_highbits(pfn) ((pfn) >> (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT))
+
+#ifdef __tilegx__
+
+/*
+ * We reserve the lower half of memory for user-space programs, and the
+ * upper half for system code.  We re-map all of physical memory in the
+ * upper half, which takes a quarter of our VA space.  Then we have
+ * the vmalloc regions.  The supervisor code lives at 0xfffffff700000000,
+ * with the hypervisor above that.
+ *
+ * Loadable kernel modules are placed immediately after the static
+ * supervisor code, with each being allocated a 256MB region of
+ * address space, so we don't have to worry about the range of "jal"
+ * and other branch instructions.
+ *
+ * For now we keep life simple and just allocate one pmd (4GB) for vmalloc.
+ * Similarly, for now we don't play any struct page mapping games.
+ */
+
+#if CHIP_PA_WIDTH() + 2 > CHIP_VA_WIDTH()
+# error Too much PA to map with the VA available!
+#endif
+#define HALF_VA_SPACE           (_AC(1, UL) << (CHIP_VA_WIDTH() - 1))
+
+#define MEM_LOW_END		(HALF_VA_SPACE - 1)         /* low half */
+#define MEM_HIGH_START		(-HALF_VA_SPACE)            /* high half */
+#define PAGE_OFFSET		MEM_HIGH_START
+#define _VMALLOC_START		_AC(0xfffffff500000000, UL) /* 4 GB */
+#define HUGE_VMAP_BASE		_AC(0xfffffff600000000, UL) /* 4 GB */
+#define MEM_SV_START		_AC(0xfffffff700000000, UL) /* 256 MB */
+#define MEM_SV_INTRPT		MEM_SV_START
+#define MEM_MODULE_START	_AC(0xfffffff710000000, UL) /* 256 MB */
+#define MEM_MODULE_END		(MEM_MODULE_START + (256*1024*1024))
+#define MEM_HV_START		_AC(0xfffffff800000000, UL) /* 32 GB */
+
+/* Highest DTLB address we will use */
+#define KERNEL_HIGH_VADDR	MEM_SV_START
+
+/* Since we don't currently provide any fixmaps, we use an impossible VA. */
+#define FIXADDR_TOP             MEM_HV_START
+
+#else /* !__tilegx__ */
+
+/*
+ * A PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 768MB.
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM
+ * option in the kernel configuration.
+ *
+ * The top two 16MB chunks in the table below (VIRT and HV) are
+ * unavailable to Linux.  Since the kernel interrupt vectors must live
+ * at 0xfd000000, we map all of the bottom of RAM at this address with
+ * a huge page table entry to minimize its ITLB footprint (as well as
+ * at PAGE_OFFSET).  The last architected requirement is that user
+ * interrupt vectors live at 0xfc000000, so we make that range of
+ * memory available to user processes.  The remaining regions are sized
+ * as shown; after the first four addresses, we show "typical" values,
+ * since the actual addresses depend on kernel #defines.
+ *
+ * MEM_VIRT_INTRPT                 0xff000000
+ * MEM_HV_INTRPT                   0xfe000000
+ * MEM_SV_INTRPT (kernel code)     0xfd000000
+ * MEM_USER_INTRPT (user vector)   0xfc000000
+ * FIX_KMAP_xxx                    0xf8000000 (via NR_CPUS * KM_TYPE_NR)
+ * PKMAP_BASE                      0xf7000000 (via LAST_PKMAP)
+ * HUGE_VMAP                       0xf3000000 (via CONFIG_NR_HUGE_VMAPS)
+ * VMALLOC_START                   0xf0000000 (via __VMALLOC_RESERVE)
+ * mapped LOWMEM                   0xc0000000
+ */
+
+#define MEM_USER_INTRPT		_AC(0xfc000000, UL)
+#define MEM_SV_INTRPT		_AC(0xfd000000, UL)
+#define MEM_HV_INTRPT		_AC(0xfe000000, UL)
+#define MEM_VIRT_INTRPT		_AC(0xff000000, UL)
+
+#define INTRPT_SIZE		0x4000
+
+/* Tolerate page size larger than the architecture interrupt region size. */
+#if PAGE_SIZE > INTRPT_SIZE
+#undef INTRPT_SIZE
+#define INTRPT_SIZE PAGE_SIZE
+#endif
+
+#define KERNEL_HIGH_VADDR	MEM_USER_INTRPT
+#define FIXADDR_TOP		(KERNEL_HIGH_VADDR - PAGE_SIZE)
+
+#define PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
+
+/* On 32-bit architectures we mix kernel modules in with other vmaps. */
+#define MEM_MODULE_START	VMALLOC_START
+#define MEM_MODULE_END		VMALLOC_END
+
+#endif /* __tilegx__ */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_HIGHMEM
+
+/* Map kernel virtual addresses to page frames, in HPAGE_SIZE chunks. */
+extern unsigned long pbase_map[];
+extern void *vbase_map[];
+
+static inline unsigned long kaddr_to_pfn(const volatile void *_kaddr)
+{
+	unsigned long kaddr = (unsigned long)_kaddr;
+	return pbase_map[kaddr >> HPAGE_SHIFT] +
+		((kaddr & (HPAGE_SIZE - 1)) >> PAGE_SHIFT);
+}
+
+static inline void *pfn_to_kaddr(unsigned long pfn)
+{
+	return vbase_map[__pfn_to_highbits(pfn)] + (pfn << PAGE_SHIFT);
+}
+
+static inline phys_addr_t virt_to_phys(const volatile void *kaddr)
+{
+	unsigned long pfn = kaddr_to_pfn(kaddr);
+	return ((phys_addr_t)pfn << PAGE_SHIFT) +
+		((unsigned long)kaddr & (PAGE_SIZE-1));
+}
+
+static inline void *phys_to_virt(phys_addr_t paddr)
+{
+	return pfn_to_kaddr(paddr >> PAGE_SHIFT) + (paddr & (PAGE_SIZE-1));
+}
+
+/* With HIGHMEM, we pack PAGE_OFFSET through high_memory with all valid VAs. */
+static inline int virt_addr_valid(const volatile void *kaddr)
+{
+	extern void *high_memory;  /* copied from <linux/mm.h> */
+	return ((unsigned long)kaddr >= PAGE_OFFSET && kaddr < high_memory);
+}
+
+#else /* !CONFIG_HIGHMEM */
+
+static inline unsigned long kaddr_to_pfn(const volatile void *kaddr)
+{
+	return ((unsigned long)kaddr - PAGE_OFFSET) >> PAGE_SHIFT;
+}
+
+static inline void *pfn_to_kaddr(unsigned long pfn)
+{
+	return (void *)((pfn << PAGE_SHIFT) + PAGE_OFFSET);
+}
+
+static inline phys_addr_t virt_to_phys(const volatile void *kaddr)
+{
+	return (phys_addr_t)((unsigned long)kaddr - PAGE_OFFSET);
+}
+
+static inline void *phys_to_virt(phys_addr_t paddr)
+{
+	return (void *)((unsigned long)paddr + PAGE_OFFSET);
+}
+
+/* Check that the given address is within some mapped range of PAs. */
+#define virt_addr_valid(kaddr) pfn_valid(kaddr_to_pfn(kaddr))
+
+#endif /* !CONFIG_HIGHMEM */
+
+/* All callers are not consistent in how they call these functions. */
+#define __pa(kaddr) virt_to_phys((void *)(unsigned long)(kaddr))
+#define __va(paddr) phys_to_virt((phys_addr_t)(paddr))
+
+extern int devmem_is_allowed(unsigned long pagenr);
+
+#ifdef CONFIG_FLATMEM
+static inline int pfn_valid(unsigned long pfn)
+{
+	return pfn < max_mapnr;
+}
+#endif
+
+/* Provide as macros since these require some other headers included. */
+#define page_to_pa(page) ((phys_addr_t)(page_to_pfn(page)) << PAGE_SHIFT)
+#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn(kaddr))
+#define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page))
+
+struct mm_struct;
+extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TILE_PAGE_H */
diff --git a/arch/tile/include/asm/param.h b/arch/tile/include/asm/param.h
new file mode 100644
index 00000000000..965d4542797
--- /dev/null
+++ b/arch/tile/include/asm/param.h
@@ -0,0 +1 @@
+#include <asm-generic/param.h>
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
new file mode 100644
index 00000000000..e853b0e2793
--- /dev/null
+++ b/arch/tile/include/asm/pci-bridge.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PCI_BRIDGE_H
+#define _ASM_TILE_PCI_BRIDGE_H
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pci_io_base returns the memory address at which you can access
+ * the I/O space for PCI bus number `bus' (or NULL on error).
+ */
+extern void __iomem *pci_bus_io_base(unsigned int bus);
+extern unsigned long pci_bus_io_base_phys(unsigned int bus);
+extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
+
+/* Allocate a new PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(void);
+
+/* Helper function for setting up resources */
+extern void pci_init_resource(struct resource *res, unsigned long start,
+			      unsigned long end, int flags, char *name);
+
+/* Get the PCI host controller for a bus */
+extern struct pci_controller *pci_bus_to_hose(int bus);
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	int first_busno;
+	int last_busno;
+
+	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
+	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
+
+	struct pci_ops *ops;
+
+	int irq_base;		/* Base IRQ from the Hypervisor	*/
+	int plx_gen1;		/* flag for PLX Gen 1 configuration */
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
+
+static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+extern void setup_indirect_pci_nomap(struct pci_controller *hose,
+			       void __iomem *cfg_addr, void __iomem *cfg_data);
+extern void setup_indirect_pci(struct pci_controller *hose,
+			       u32 cfg_addr, u32 cfg_data);
+extern void setup_grackle(struct pci_controller *hose);
+
+extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
+
+/*
+ *   The following code swizzles for exactly one bridge.  The routine
+ *   common_swizzle below handles multiple bridges.  But there are a
+ *   some boards that don't follow the PCI spec's suggestion so we
+ *   break this piece out separately.
+ */
+static inline unsigned char bridge_swizzle(unsigned char pin,
+		unsigned char idsel)
+{
+	return (((pin-1) + idsel) % 4) + 1;
+}
+
+/*
+ * The following macro is used to lookup irqs in a standard table
+ * format for those PPC systems that do not already have PCI
+ * interrupts properly routed.
+ */
+/* FIXME - double check this */
+#define PCI_IRQ_TABLE_LOOKUP ({ \
+	long _ctl_ = -1; \
+	if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
+		_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
+	_ctl_; \
+})
+
+/*
+ * Scan the buses below a given PCI host bridge and assign suitable
+ * resources to all devices found.
+ */
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+#endif
+
+#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
new file mode 100644
index 00000000000..b0c15da2d5d
--- /dev/null
+++ b/arch/tile/include/asm/pci.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PCI_H
+#define _ASM_TILE_PCI_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The hypervisor maps the entirety of CPA-space as bus addresses, so
+ * bus addresses are physical addresses.  The networking and block
+ * device layers use this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     1
+
+struct pci_controller *pci_bus_to_hose(int bus);
+unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
+int __init tile_pci_init(void);
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
+
+int __devinit _tile_cfg_read(struct pci_controller *hose,
+				    int bus,
+				    int slot,
+				    int function,
+				    int offset,
+				    int size,
+				    u32 *val);
+int __devinit _tile_cfg_write(struct pci_controller *hose,
+				     int bus,
+				     int slot,
+				     int function,
+				     int offset,
+				     int size,
+				     u32 val);
+
+/*
+ * These are used to to config reads and writes in the early stages of
+ * setup before the driver infrastructure has been set up enough to be
+ * able to do config reads and writes.
+ */
+#define early_cfg_read(where, size, value) \
+	_tile_cfg_read(controller, \
+		       current_bus, \
+		       pci_slot, \
+		       pci_fn, \
+		       where, \
+		       size, \
+		       value)
+
+#define early_cfg_write(where, size, value) \
+	_tile_cfg_write(controller, \
+		       current_bus, \
+		       pci_slot, \
+		       pci_fn, \
+		       where, \
+		       size, \
+		       value)
+
+
+
+#define PCICFG_BYTE	1
+#define PCICFG_WORD	2
+#define PCICFG_DWORD	4
+
+#define	TILE_NUM_PCIE	2
+
+#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
+
+/*
+ * This decides whether to display the domain number in /proc.
+ */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/*
+ * I/O space is currently not supported.
+ */
+
+#define TILE_PCIE_LOWER_IO		0x0
+#define TILE_PCIE_UPPER_IO		0x10000
+#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
+
+#define _PAGE_NO_CACHE		0
+#define _PAGE_GUARDED		0
+
+
+#define pcibios_assign_all_busses()    pci_assign_all_buses
+extern int pci_assign_all_buses;
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+#define PCIBIOS_MIN_MEM		0
+#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int blade_pci;
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
+
+#endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h
new file mode 100644
index 00000000000..63294f5a8ef
--- /dev/null
+++ b/arch/tile/include/asm/percpu.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PERCPU_H
+#define _ASM_TILE_PERCPU_H
+
+register unsigned long __my_cpu_offset __asm__("tp");
+#define __my_cpu_offset __my_cpu_offset
+#define set_my_cpu_offset(tp) (__my_cpu_offset = (tp))
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_TILE_PERCPU_H */
diff --git a/arch/tile/include/asm/pgalloc.h b/arch/tile/include/asm/pgalloc.h
new file mode 100644
index 00000000000..cf52791a550
--- /dev/null
+++ b/arch/tile/include/asm/pgalloc.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PGALLOC_H
+#define _ASM_TILE_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <asm/fixmap.h>
+#include <hv/hypervisor.h>
+
+/* Bits for the size of the second-level page table. */
+#define L2_KERNEL_PGTABLE_SHIFT \
+  (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL + HV_LOG2_PTE_SIZE)
+
+/* We currently allocate user L2 page tables by page (unlike kernel L2s). */
+#if L2_KERNEL_PGTABLE_SHIFT < HV_LOG2_PAGE_SIZE_SMALL
+#define L2_USER_PGTABLE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
+#else
+#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT
+#endif
+
+/* How many pages do we need, as an "order", for a user L2 page table? */
+#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - HV_LOG2_PAGE_SIZE_SMALL)
+
+/* How big is a kernel L2 page table? */
+#define L2_KERNEL_PGTABLE_SIZE (1 << L2_KERNEL_PGTABLE_SHIFT)
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+#ifdef CONFIG_64BIT
+	set_pte_order(pmdp, pmd, L2_USER_PGTABLE_ORDER);
+#else
+	set_pte_order(&pmdp->pud.pgd, pmd.pud.pgd, L2_USER_PGTABLE_ORDER);
+#endif
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *ptep)
+{
+	set_pmd(pmd, ptfn_pmd(__pa(ptep) >> HV_LOG2_PAGE_TABLE_ALIGN,
+			      __pgprot(_PAGE_PRESENT)));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t page)
+{
+	set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(page_to_pfn(page)),
+			      __pgprot(_PAGE_PRESENT)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address);
+extern void pte_free(struct mm_struct *mm, struct page *pte);
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	return pfn_to_kaddr(page_to_pfn(pte_alloc_one(mm, address)));
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+	pte_free(mm, virt_to_page(pte));
+}
+
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+			   unsigned long address);
+
+#define check_pgt_cache()	do { } while (0)
+
+/*
+ * Get the small-page pte_t lowmem entry for a given pfn.
+ * This may or may not be in use, depending on whether the initial
+ * huge-page entry for the page has already been shattered.
+ */
+pte_t *get_prealloc_pte(unsigned long pfn);
+
+/* During init, we can shatter kernel huge pages if needed. */
+void shatter_pmd(pmd_t *pmd);
+
+#ifdef __tilegx__
+/* We share a single page allocator for both L1 and L2 page tables. */
+#if HV_L1_SIZE != HV_L2_SIZE
+# error Rework assumption that L1 and L2 page tables are same size.
+#endif
+#define L1_USER_PGTABLE_ORDER L2_USER_PGTABLE_ORDER
+#define pud_populate(mm, pud, pmd) \
+  pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd))
+#define pmd_alloc_one(mm, addr) \
+  ((pmd_t *)page_to_virt(pte_alloc_one((mm), (addr))))
+#define pmd_free(mm, pmdp) \
+  pte_free((mm), virt_to_page(pmdp))
+#define __pmd_free_tlb(tlb, pmdp, address) \
+  __pte_free_tlb((tlb), virt_to_page(pmdp), (address))
+#endif
+
+#endif /* _ASM_TILE_PGALLOC_H */
diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h
new file mode 100644
index 00000000000..b3367379d53
--- /dev/null
+++ b/arch/tile/include/asm/pgtable.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the TILE page table tree.
+ */
+
+#ifndef _ASM_TILE_PGTABLE_H
+#define _ASM_TILE_PGTABLE_H
+
+#include <hv/hypervisor.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/system.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+extern pgprot_t swapper_pgprot;
+extern struct kmem_cache *pgd_cache;
+extern spinlock_t pgd_lock;
+extern struct list_head pgd_list;
+
+/*
+ * The very last slots in the pgd_t are for addresses unusable by Linux
+ * (pgd_addr_invalid() returns true).  So we use them for the list structure.
+ * The x86 code we are modelled on uses the page->private/index fields
+ * (older 2.6 kernels) or the lru list (newer 2.6 kernels), but since
+ * our pgds are so much smaller than a page, it seems a waste to
+ * spend a whole page on each pgd.
+ */
+#define PGD_LIST_OFFSET \
+  ((PTRS_PER_PGD * sizeof(pgd_t)) - sizeof(struct list_head))
+#define pgd_to_list(pgd) \
+  ((struct list_head *)((char *)(pgd) + PGD_LIST_OFFSET))
+#define list_to_pgd(list) \
+  ((pgd_t *)((char *)(list) - PGD_LIST_OFFSET))
+
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+extern void set_page_homes(void);
+
+#define FIRST_USER_ADDRESS	0
+
+#define _PAGE_PRESENT           HV_PTE_PRESENT
+#define _PAGE_HUGE_PAGE         HV_PTE_PAGE
+#define _PAGE_READABLE          HV_PTE_READABLE
+#define _PAGE_WRITABLE          HV_PTE_WRITABLE
+#define _PAGE_EXECUTABLE        HV_PTE_EXECUTABLE
+#define _PAGE_ACCESSED          HV_PTE_ACCESSED
+#define _PAGE_DIRTY             HV_PTE_DIRTY
+#define _PAGE_GLOBAL            HV_PTE_GLOBAL
+#define _PAGE_USER              HV_PTE_USER
+
+/*
+ * All the "standard" bits.  Cache-control bits are managed elsewhere.
+ * This is used to test for valid level-2 page table pointers by checking
+ * all the bits, and to mask away the cache control bits for mprotect.
+ */
+#define _PAGE_ALL (\
+  _PAGE_PRESENT | \
+  _PAGE_HUGE_PAGE | \
+  _PAGE_READABLE | \
+  _PAGE_WRITABLE | \
+  _PAGE_EXECUTABLE | \
+  _PAGE_ACCESSED | \
+  _PAGE_DIRTY | \
+  _PAGE_GLOBAL | \
+  _PAGE_USER \
+)
+
+#define PAGE_NONE \
+	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_SHARED \
+	__pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \
+		 _PAGE_USER | _PAGE_ACCESSED)
+
+#define PAGE_SHARED_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \
+		 _PAGE_EXECUTABLE | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE)
+#define PAGE_COPY_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \
+		 _PAGE_READABLE | _PAGE_EXECUTABLE)
+#define PAGE_COPY \
+	PAGE_COPY_NOEXEC
+#define PAGE_READONLY \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE)
+#define PAGE_READONLY_EXEC \
+	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \
+		 _PAGE_READABLE | _PAGE_EXECUTABLE)
+
+#define _PAGE_KERNEL_RO \
+ (_PAGE_PRESENT | _PAGE_GLOBAL | _PAGE_READABLE | _PAGE_ACCESSED)
+#define _PAGE_KERNEL \
+ (_PAGE_KERNEL_RO | _PAGE_WRITABLE | _PAGE_DIRTY)
+#define _PAGE_KERNEL_EXEC       (_PAGE_KERNEL_RO | _PAGE_EXECUTABLE)
+
+#define PAGE_KERNEL		__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO		__pgprot(_PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_KERNEL_EXEC)
+
+#define page_to_kpgprot(p) PAGE_KERNEL
+
+/*
+ * We could tighten these up, but for now writable or executable
+ * implies readable.
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY      /* this is write-only, which we won't support */
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * All the normal _PAGE_ALL bits are ignored for PMDs, except PAGE_PRESENT
+ * and PAGE_HUGE_PAGE, which must be one and zero, respectively.
+ * We set the ignored bits to zero.
+ */
+#define _PAGE_TABLE     _PAGE_PRESENT
+
+/* Inherit the caching flags from the old protection bits. */
+#define pgprot_modify(oldprot, newprot) \
+  (pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val }
+
+/* Just setting the PFN to zero suffices. */
+#define pte_pgprot(x) hv_pte_set_pfn((x), 0)
+
+/*
+ * For PTEs and PDEs, we must clear the Present bit first when
+ * clearing a page table entry, so clear the bottom half first and
+ * enforce ordering with a barrier.
+ */
+static inline void __pte_clear(pte_t *ptep)
+{
+#ifdef __tilegx__
+	ptep->val = 0;
+#else
+	u32 *tmp = (u32 *)ptep;
+	tmp[0] = 0;
+	barrier();
+	tmp[1] = 0;
+#endif
+}
+#define pte_clear(mm, addr, ptep) __pte_clear(ptep)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present hv_pte_get_present
+#define pte_user hv_pte_get_user
+#define pte_read hv_pte_get_readable
+#define pte_dirty hv_pte_get_dirty
+#define pte_young hv_pte_get_accessed
+#define pte_write hv_pte_get_writable
+#define pte_exec hv_pte_get_executable
+#define pte_huge hv_pte_get_page
+#define pte_rdprotect hv_pte_clear_readable
+#define pte_exprotect hv_pte_clear_executable
+#define pte_mkclean hv_pte_clear_dirty
+#define pte_mkold hv_pte_clear_accessed
+#define pte_wrprotect hv_pte_clear_writable
+#define pte_mksmall hv_pte_clear_page
+#define pte_mkread hv_pte_set_readable
+#define pte_mkexec hv_pte_set_executable
+#define pte_mkdirty hv_pte_set_dirty
+#define pte_mkyoung hv_pte_set_accessed
+#define pte_mkwrite hv_pte_set_writable
+#define pte_mkhuge hv_pte_set_page
+
+#define pte_special(pte) 0
+#define pte_mkspecial(pte) (pte)
+
+/*
+ * Use some spare bits in the PTE for user-caching tags.
+ */
+#define pte_set_forcecache hv_pte_set_client0
+#define pte_get_forcecache hv_pte_get_client0
+#define pte_clear_forcecache hv_pte_clear_client0
+#define pte_set_anyhome hv_pte_set_client1
+#define pte_get_anyhome hv_pte_get_client1
+#define pte_clear_anyhome hv_pte_clear_client1
+
+/*
+ * A migrating PTE has PAGE_PRESENT clear but all the other bits preserved.
+ */
+#define pte_migrating hv_pte_get_migrating
+#define pte_mkmigrate(x) hv_pte_set_migrating(hv_pte_clear_present(x))
+#define pte_donemigrate(x) hv_pte_set_present(hv_pte_clear_migrating(x))
+
+#define pte_ERROR(e) \
+	pr_err("%s:%d: bad pte 0x%016llx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	pr_err("%s:%d: bad pgd 0x%016llx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * set_pte_order() sets the given PTE and also sanity-checks the
+ * requested PTE against the page homecaching.  Unspecified parts
+ * of the PTE are filled in when it is written to memory, i.e. all
+ * caching attributes if "!forcecache", or the home cpu if "anyhome".
+ */
+extern void set_pte_order(pte_t *ptep, pte_t pte, int order);
+
+#define set_pte(ptep, pteval) set_pte_order(ptep, pteval, 0)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+#define set_pte_atomic(pteptr, pteval) set_pte(pteptr, pteval)
+
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+static inline int pte_none(pte_t pte)
+{
+	return !pte.val;
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return hv_pte_get_pfn(pte);
+}
+
+/* Set or get the remote cache cpu in a pgprot with remote caching. */
+extern pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu);
+extern int get_remote_cache_cpu(pgprot_t prot);
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	return hv_pte_set_pfn(prot, pfn);
+}
+
+/* Support for priority mappings. */
+extern void start_mm_caching(struct mm_struct *mm);
+extern void check_mm_caching(struct mm_struct *prev, struct mm_struct *next);
+
+/*
+ * Support non-linear file mappings (see sys_remap_file_pages).
+ * This is defined by CLIENT1 set but CLIENT0 and _PAGE_PRESENT clear, and the
+ * file offset in the 32 high bits.
+ */
+#define _PAGE_FILE        HV_PTE_CLIENT1
+#define PTE_FILE_MAX_BITS 32
+#define pte_file(pte)     (hv_pte_get_client1(pte) && !hv_pte_get_client0(pte))
+#define pte_to_pgoff(pte) ((pte).val >> 32)
+#define pgoff_to_pte(off) ((pte_t) { (((long long)(off)) << 32) | _PAGE_FILE })
+
+/*
+ * Encode and de-code a swap entry (see <linux/swapops.h>).
+ * We put the swap file type+offset in the 32 high bits;
+ * I believe we can just leave the low bits clear.
+ */
+#define __swp_type(swp)		((swp).val & 0x1f)
+#define __swp_offset(swp)	((swp).val >> 5)
+#define __swp_entry(type, off)	((swp_entry_t) { (type) | ((off) << 5) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { (pte).val >> 32 })
+#define __swp_entry_to_pte(swp)	((pte_t) { (((long long) ((swp).val)) << 32) })
+
+/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ *  dst - pointer to pgd range anwhere on a pgd page
+ *  src - ""
+ *  count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+       memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/*
+ * If we are doing an mprotect(), just accept the new vma->vm_page_prot
+ * value and combine it with the PFN from the old PTE to get a new PTE.
+ */
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return pfn_pte(hv_pte_get_pfn(pte), newprot);
+}
+
+/*
+ * The pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * This macro returns the index of the entry in the pgd page which would
+ * control the given virtual address.
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's.
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * A shortcut which implies the use of the kernel's pgd, instead
+ * of a process's.
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#if defined(CONFIG_HIGHPTE)
+extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type);
+#define pte_offset_map(dir, address) \
+	_pte_offset_map(dir, address, KM_PTE0)
+#define pte_offset_map_nested(dir, address) \
+	_pte_offset_map(dir, address, KM_PTE1)
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+#else
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/* Clear a non-executable kernel PTE and flush it from the TLB. */
+#define kpte_clear_flush(ptep, vaddr)		\
+do {						\
+	pte_clear(&init_mm, (vaddr), (ptep));	\
+	local_flush_tlb_page(FLUSH_NONEXEC, (vaddr), PAGE_SIZE); \
+} while (0)
+
+/*
+ * The kernel page tables contain what we need, and we flush when we
+ * change specific page table entries.
+ */
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+#ifdef CONFIG_FLATMEM
+#define kern_addr_valid(addr)	(1)
+#endif /* CONFIG_FLATMEM */
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+extern void vmalloc_sync_all(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __tilegx__
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+static inline int pmd_none(pmd_t pmd)
+{
+	/*
+	 * Only check low word on 32-bit platforms, since it might be
+	 * out of sync with upper half.
+	 */
+	return (unsigned long)pmd_val(pmd) == 0;
+}
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pmd_val(pmd) & _PAGE_PRESENT;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	return ((pmd_val(pmd) & _PAGE_ALL) != _PAGE_TABLE);
+}
+
+static inline unsigned long pages_to_mb(unsigned long npg)
+{
+	return npg >> (20 - PAGE_SHIFT);
+}
+
+/*
+ * The pmd can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * This function returns the index of the entry in the pmd which would
+ * control the given virtual address.
+ */
+static inline unsigned long pmd_index(unsigned long address)
+{
+	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
+/*
+ * A given kernel pmd_t maps to a specific virtual address (either a
+ * kernel huge page or a kernel pte_t table).  Since kernel pte_t
+ * tables can be aligned at sub-page granularity, this function can
+ * return non-page-aligned pointers, despite its name.
+ */
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+	phys_addr_t pa =
+		(phys_addr_t)pmd_ptfn(pmd) << HV_LOG2_PAGE_TABLE_ALIGN;
+	return (unsigned long)__va(pa);
+}
+
+/*
+ * A pmd_t points to the base of a huge page or to a pte_t array.
+ * If a pte_t array, since we can have multiple per page, we don't
+ * have a one-to-one mapping of pmd_t's to pages.  However, this is
+ * OK for pte_lockptr(), since we just end up with potentially one
+ * lock being used for several pte_t arrays.
+ */
+#define pmd_page(pmd) pfn_to_page(HV_PTFN_TO_PFN(pmd_ptfn(pmd)))
+
+/*
+ * The pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * This macro returns the index of the entry in the pte page which would
+ * control the given virtual address.
+ */
+static inline unsigned long pte_index(unsigned long address)
+{
+	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
+
+static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
+{
+       return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
+}
+
+static inline int pmd_huge_page(pmd_t pmd)
+{
+	return pmd_val(pmd) & _PAGE_HUGE_PAGE;
+}
+
+#include <asm-generic/pgtable.h>
+
+/* Support /proc/NN/pgtable API. */
+struct seq_file;
+int arch_proc_pgtable_show(struct seq_file *m, struct mm_struct *mm,
+			   unsigned long vaddr, pte_t *ptep, void **datap);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_PGTABLE_H */
diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h
new file mode 100644
index 00000000000..53ec3488474
--- /dev/null
+++ b/arch/tile/include/asm/pgtable_32.h
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ */
+
+#ifndef _ASM_TILE_PGTABLE_32_H
+#define _ASM_TILE_PGTABLE_32_H
+
+/*
+ * The level-1 index is defined by the huge page size.  A PGD is composed
+ * of PTRS_PER_PGD pgd_t's and is the top level of the page table.
+ */
+#define PGDIR_SHIFT	HV_LOG2_PAGE_SIZE_LARGE
+#define PGDIR_SIZE	HV_PAGE_SIZE_LARGE
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+/*
+ * The level-2 index is defined by the difference between the huge
+ * page size and the normal page size.  A PTE is composed of
+ * PTRS_PER_PTE pte_t's and is the bottom level of the page table.
+ * Note that the hypervisor docs use PTE for what we call pte_t, so
+ * this nomenclature is somewhat confusing.
+ */
+#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ *
+ * HOWEVER, if we are using an allocation scheme with slop after the
+ * end of the page table (e.g. where our L2 page tables are 2KB but
+ * our pages are 64KB and we are allocating via the page allocator)
+ * we can't extend it easily.
+ */
+#define LAST_PKMAP PTRS_PER_PTE
+
+#define PKMAP_BASE   ((FIXADDR_BOOT_START - PAGE_SIZE*LAST_PKMAP) & PGDIR_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define __VMAPPING_END	(PKMAP_BASE & ~(HPAGE_SIZE-1))
+#else
+# define __VMAPPING_END	(FIXADDR_START & ~(HPAGE_SIZE-1))
+#endif
+
+#ifdef CONFIG_HUGEVMAP
+#define HUGE_VMAP_END	__VMAPPING_END
+#define HUGE_VMAP_BASE	(HUGE_VMAP_END - CONFIG_NR_HUGE_VMAPS * HPAGE_SIZE)
+#define _VMALLOC_END	HUGE_VMAP_BASE
+#else
+#define _VMALLOC_END	__VMAPPING_END
+#endif
+
+/*
+ * Align the vmalloc area to an L2 page table, and leave a guard page
+ * at the beginning and end.  The vmalloc code also puts in an internal
+ * guard page between each allocation.
+ */
+#define VMALLOC_END	(_VMALLOC_END - PAGE_SIZE)
+extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */;
+#define _VMALLOC_START	(_VMALLOC_END - VMALLOC_RESERVE)
+#define VMALLOC_START	(_VMALLOC_START + PAGE_SIZE)
+
+/* This is the maximum possible amount of lowmem. */
+#define MAXMEM		(_VMALLOC_START - PAGE_OFFSET)
+
+/* We have no pmd or pud since we are strictly a two-level page table */
+#include <asm-generic/pgtable-nopmd.h>
+
+/* We don't define any pgds for these addresses. */
+static inline int pgd_addr_invalid(unsigned long addr)
+{
+	return addr >= MEM_HV_INTRPT;
+}
+
+/*
+ * Provide versions of these routines that can be used safely when
+ * the hypervisor may be asynchronously modifying dirty/accessed bits.
+ * ptep_get_and_clear() matches the generic one but we provide it to
+ * be parallel with the 64-bit code.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+
+extern int ptep_test_and_clear_young(struct vm_area_struct *,
+				     unsigned long addr, pte_t *);
+extern void ptep_set_wrprotect(struct mm_struct *,
+			       unsigned long addr, pte_t *);
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	pte_clear(_mm, addr, ptep);
+	return pte;
+}
+
+/* Create a pmd from a PTFN. */
+static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
+{
+	return (pmd_t){ { hv_pte_set_ptfn(prot, ptfn) } };
+}
+
+/* Return the page-table frame number (ptfn) that a pmd_t points at. */
+#define pmd_ptfn(pmd) hv_pte_get_ptfn((pmd).pud.pgd)
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	__pte_clear(&pmdp->pud.pgd);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_TILE_PGTABLE_32_H */
diff --git a/arch/tile/include/asm/poll.h b/arch/tile/include/asm/poll.h
new file mode 100644
index 00000000000..c98509d3149
--- /dev/null
+++ b/arch/tile/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/tile/include/asm/posix_types.h b/arch/tile/include/asm/posix_types.h
new file mode 100644
index 00000000000..22cae6230ce
--- /dev/null
+++ b/arch/tile/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-generic/posix_types.h>
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
new file mode 100644
index 00000000000..d942d09b252
--- /dev/null
+++ b/arch/tile/include/asm/processor.h
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PROCESSOR_H
+#define _ASM_TILE_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one
+ * normally would, due to #include dependencies.
+ */
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/percpu.h>
+
+#include <arch/chip.h>
+#include <arch/spr_def.h>
+
+struct task_struct;
+struct thread_struct;
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+void *current_text_addr(void);
+
+#if CHIP_HAS_TILE_DMA()
+/* Capture the state of a suspended DMA. */
+struct tile_dma_state {
+	int enabled;
+	unsigned long src;
+	unsigned long dest;
+	unsigned long strides;
+	unsigned long chunk_size;
+	unsigned long src_chunk;
+	unsigned long dest_chunk;
+	unsigned long byte;
+	unsigned long status;
+};
+
+/*
+ * A mask of the DMA status register for selecting only the 'running'
+ * and 'done' bits.
+ */
+#define DMA_STATUS_MASK \
+  (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK)
+#endif
+
+/*
+ * Track asynchronous TLB events (faults and access violations)
+ * that occur while we are in kernel mode from DMA or the SN processor.
+ */
+struct async_tlb {
+	short fault_num;         /* original fault number; 0 if none */
+	char is_fault;           /* was it a fault (vs an access violation) */
+	char is_write;           /* for fault: was it caused by a write? */
+	unsigned long address;   /* what address faulted? */
+};
+
+#ifdef CONFIG_HARDWALL
+struct hardwall_info;
+#endif
+
+struct thread_struct {
+	/* kernel stack pointer */
+	unsigned long  ksp;
+	/* kernel PC */
+	unsigned long  pc;
+	/* starting user stack pointer (for page migration) */
+	unsigned long  usp0;
+	/* pid of process that created this one */
+	pid_t creator_pid;
+#if CHIP_HAS_TILE_DMA()
+	/* DMA info for suspended threads (byte == 0 means no DMA state) */
+	struct tile_dma_state tile_dma_state;
+#endif
+	/* User EX_CONTEXT registers */
+	unsigned long ex_context[2];
+	/* User SYSTEM_SAVE registers */
+	unsigned long system_save[4];
+	/* User interrupt mask */
+	unsigned long long interrupt_mask;
+	/* User interrupt-control 0 state */
+	unsigned long intctrl_0;
+#if CHIP_HAS_PROC_STATUS_SPR()
+	/* Any other miscellaneous processor state bits */
+	unsigned long proc_status;
+#endif
+#ifdef CONFIG_HARDWALL
+	/* Is this task tied to an activated hardwall? */
+	struct hardwall_info *hardwall;
+	/* Chains this task into the list at hardwall->list. */
+	struct list_head hardwall_list;
+#endif
+#if CHIP_HAS_TILE_DMA()
+	/* Async DMA TLB fault information */
+	struct async_tlb dma_async_tlb;
+#endif
+#if CHIP_HAS_SN_PROC()
+	/* Was static network processor when we were switched out? */
+	int sn_proc_running;
+	/* Async SNI TLB fault information */
+	struct async_tlb sn_async_tlb;
+#endif
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Start with "sp" this many bytes below the top of the kernel stack.
+ * This preserves the invariant that a called function may write to *sp.
+ */
+#define STACK_TOP_DELTA 8
+
+/*
+ * When entering the kernel via a fault, start with the top of the
+ * pt_regs structure this many bytes below the top of the page.
+ * This aligns the pt_regs structure optimally for cache-line access.
+ */
+#ifdef __tilegx__
+#define KSTK_PTREGS_GAP  48
+#else
+#define KSTK_PTREGS_GAP  56
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __tilegx__
+#define TASK_SIZE_MAX		(MEM_LOW_END + 1)
+#else
+#define TASK_SIZE_MAX		PAGE_OFFSET
+#endif
+
+/* TASK_SIZE and related variables are always checked in "current" context. */
+#ifdef CONFIG_COMPAT
+#define COMPAT_TASK_SIZE	(1UL << 31)
+#define TASK_SIZE		((current_thread_info()->status & TS_COMPAT) ?\
+				 COMPAT_TASK_SIZE : TASK_SIZE_MAX)
+#else
+#define TASK_SIZE		TASK_SIZE_MAX
+#endif
+
+/* We provide a minimal "vdso" a la x86; just the sigreturn code for now. */
+#define VDSO_BASE		(TASK_SIZE - PAGE_SIZE)
+
+#define STACK_TOP		VDSO_BASE
+
+/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */
+#define STACK_TOP_MAX		TASK_SIZE_MAX
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's, if it is using bottom-up mapping.
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#define INIT_THREAD {                                                   \
+	.ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \
+	.interrupt_mask = -1ULL                                         \
+}
+
+/* Kernel stack top for the task that first boots on this cpu. */
+DECLARE_PER_CPU(unsigned long, boot_sp);
+
+/* PC to boot from on this cpu. */
+DECLARE_PER_CPU(unsigned long, boot_pc);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs *regs,
+				unsigned long pc, unsigned long usp)
+{
+	regs->pc = pc;
+	regs->sp = usp;
+}
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+	/* Nothing for now */
+}
+
+/* Prepare to copy thread state - unlazy all lazy status. */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+
+/*
+ * Return saved (kernel) PC of a blocked thread.
+ * Only used in a printk() in kernel/sched.c, so don't work too hard.
+ */
+#define thread_saved_pc(t)   ((t)->thread.pc)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* Return initial ksp value for given task. */
+#define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE)
+
+/* Return some info about the user process TASK. */
+#define KSTK_TOP(task)	(task_ksp0(task) - STACK_TOP_DELTA)
+#define task_pt_regs(task) \
+  ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1)
+#define task_sp(task)	(task_pt_regs(task)->sp)
+#define task_pc(task)	(task_pt_regs(task)->pc)
+/* Aliases for pc and sp (used in fs/proc/array.c) */
+#define KSTK_EIP(task)	task_pc(task)
+#define KSTK_ESP(task)	task_sp(task)
+
+/* Standard format for printing registers and other word-size data. */
+#ifdef __tilegx__
+# define REGFMT "0x%016lx"
+#else
+# define REGFMT "0x%08lx"
+#endif
+
+/*
+ * Do some slow action (e.g. read a slow SPR).
+ * Note that this must also have compiler-barrier semantics since
+ * it may be used in a busy loop reading memory.
+ */
+static inline void cpu_relax(void)
+{
+	__insn_mfspr(SPR_PASS);
+	barrier();
+}
+
+struct siginfo;
+extern void arch_coredump_signal(struct siginfo *, struct pt_regs *);
+#define arch_coredump_signal arch_coredump_signal
+
+/* Info on this processor (see fs/proc/cpuinfo.c) */
+struct seq_operations;
+extern const struct seq_operations cpuinfo_op;
+
+/* Provide information about the chip model. */
+extern char chip_model[64];
+
+/* Data on which physical memory controller corresponds to which NUMA node. */
+extern int node_controller[];
+
+
+/* Do we dump information to the console when a user application crashes? */
+extern int show_crashinfo;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Does the heap allocator return hash-for-home pages by default? */
+extern int hash_default;
+
+/* Should kernel stack pages be hash-for-home? */
+extern int kstack_hash;
+
+/* Does MAP_ANONYMOUS return hash-for-home pages by default? */
+#define uheap_hash hash_default
+
+#else
+#define hash_default 0
+#define kstack_hash 0
+#define uheap_hash 0
+#endif
+
+/* Are we using huge pages in the TLB for kernel data? */
+extern int kdata_huge;
+
+#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
+
+#else /* __ASSEMBLY__ */
+
+/* Do some slow action (e.g. read a slow SPR). */
+#define CPU_RELAX       mfspr zero, SPR_PASS
+
+#endif /* !__ASSEMBLY__ */
+
+/* Assembly code assumes that the PL is in the low bits. */
+#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0
+# error Fix assembly assumptions about PL
+#endif
+
+/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */
+#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \
+    SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \
+    SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \
+    SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK
+# error Fix assumptions that EX1 macros work for both PL0 and PL1
+#endif
+
+/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */
+#define EX1_PL(ex1) \
+  (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK)
+#define EX1_ICS(ex1) \
+  (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK)
+#define PL_ICS_EX1(pl, ics) \
+  (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \
+   ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT))
+
+/*
+ * Provide symbolic constants for PLs.
+ * Note that assembly code assumes that USER_PL is zero.
+ */
+#define USER_PL 0
+#define KERNEL_PL 1
+
+/* SYSTEM_SAVE_1_0 holds the current cpu number ORed with ksp0. */
+#define CPU_LOG_MASK_VALUE 12
+#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
+#if CONFIG_NR_CPUS > CPU_MASK_VALUE
+# error Too many cpus!
+#endif
+#define raw_smp_processor_id() \
+	((int)__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & CPU_MASK_VALUE)
+#define get_current_ksp0() \
+	(__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & ~CPU_MASK_VALUE)
+#define next_current_ksp0(task) ({ \
+	unsigned long __ksp0 = task_ksp0(task); \
+	int __cpu = raw_smp_processor_id(); \
+	BUG_ON(__ksp0 & CPU_MASK_VALUE); \
+	__ksp0 | __cpu; \
+})
+
+#endif /* _ASM_TILE_PROCESSOR_H */
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
new file mode 100644
index 00000000000..acdae814e01
--- /dev/null
+++ b/arch/tile/include/asm/ptrace.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_PTRACE_H
+#define _ASM_TILE_PTRACE_H
+
+#include <arch/chip.h>
+#include <arch/abi.h>
+
+/* These must match struct pt_regs, below. */
+#if CHIP_WORD_SIZE() == 32
+#define PTREGS_OFFSET_REG(n)    ((n)*4)
+#else
+#define PTREGS_OFFSET_REG(n)    ((n)*8)
+#endif
+#define PTREGS_OFFSET_BASE      0
+#define PTREGS_OFFSET_TP        PTREGS_OFFSET_REG(53)
+#define PTREGS_OFFSET_SP        PTREGS_OFFSET_REG(54)
+#define PTREGS_OFFSET_LR        PTREGS_OFFSET_REG(55)
+#define PTREGS_NR_GPRS          56
+#define PTREGS_OFFSET_PC        PTREGS_OFFSET_REG(56)
+#define PTREGS_OFFSET_EX1       PTREGS_OFFSET_REG(57)
+#define PTREGS_OFFSET_FAULTNUM  PTREGS_OFFSET_REG(58)
+#define PTREGS_OFFSET_ORIG_R0   PTREGS_OFFSET_REG(59)
+#define PTREGS_OFFSET_FLAGS     PTREGS_OFFSET_REG(60)
+#if CHIP_HAS_CMPEXCH()
+#define PTREGS_OFFSET_CMPEXCH   PTREGS_OFFSET_REG(61)
+#endif
+#define PTREGS_SIZE             PTREGS_OFFSET_REG(64)
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+/* Benefit from consistent use of "long" on all chips. */
+typedef unsigned long pt_reg_t;
+#else
+/* Provide appropriate length type to userspace regardless of -m32/-m64. */
+typedef uint_reg_t pt_reg_t;
+#endif
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception.  It should be a multiple of 8 bytes to preserve
+ * normal stack alignment rules.
+ *
+ * Must track <sys/ucontext.h> and <sys/procfs.h>
+ */
+struct pt_regs {
+	/* Saved main processor registers; 56..63 are special. */
+	/* tp, sp, and lr must immediately follow regs[] for aliasing. */
+	pt_reg_t regs[53];
+	pt_reg_t tp;		/* aliases regs[TREG_TP] */
+	pt_reg_t sp;		/* aliases regs[TREG_SP] */
+	pt_reg_t lr;		/* aliases regs[TREG_LR] */
+
+	/* Saved special registers. */
+	pt_reg_t pc;		/* stored in EX_CONTEXT_1_0 */
+	pt_reg_t ex1;		/* stored in EX_CONTEXT_1_1 (PL and ICS bit) */
+	pt_reg_t faultnum;	/* fault number (INT_SWINT_1 for syscall) */
+	pt_reg_t orig_r0;	/* r0 at syscall entry, else zero */
+	pt_reg_t flags;		/* flags (see below) */
+#if !CHIP_HAS_CMPEXCH()
+	pt_reg_t pad[3];
+#else
+	pt_reg_t cmpexch;	/* value of CMPEXCH_VALUE SPR at interrupt */
+	pt_reg_t pad[2];
+#endif
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Flag bits in pt_regs.flags */
+#define PT_FLAGS_DISABLE_IRQ    1  /* on return to kernel, disable irqs */
+#define PT_FLAGS_CALLER_SAVES   2  /* caller-save registers are valid */
+#define PT_FLAGS_RESTORE_REGS   4  /* restore callee-save regs on return */
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+
+/* Support TILE-specific ptrace options, with events starting at 16. */
+#define PTRACE_O_TRACEMIGRATE	0x00010000
+#define PTRACE_EVENT_MIGRATE	16
+#ifdef __KERNEL__
+#define PTRACE_O_MASK_TILE	(PTRACE_O_TRACEMIGRATE)
+#define PT_TRACE_MIGRATE	0x00080000
+#define PT_TRACE_MASK_TILE	(PT_TRACE_MIGRATE)
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* Does the process account for user or for system time? */
+#define user_mode(regs) (EX1_PL((regs)->ex1) == USER_PL)
+
+/* Fill in a struct pt_regs with the current kernel registers. */
+struct pt_regs *get_pt_regs(struct pt_regs *);
+
+/* Trace the current syscall. */
+extern void do_syscall_trace(void);
+
+extern void show_regs(struct pt_regs *);
+
+#define arch_has_single_step()	(1)
+
+/*
+ * A structure for all single-stepper state.
+ *
+ * Also update defines in assembler section if it changes
+ */
+struct single_step_state {
+	/* the page to which we will write hacked-up bundles */
+	void __user *buffer;
+
+	union {
+		int flags;
+		struct {
+			unsigned long is_enabled:1, update:1, update_reg:6;
+		};
+	};
+
+	unsigned long orig_pc;		/* the original PC */
+	unsigned long next_pc;		/* return PC if no branch (PC + 1) */
+	unsigned long branch_next_pc;	/* return PC if we did branch/jump */
+	unsigned long update_value;	/* value to restore to update_target */
+};
+
+/* Single-step the instruction at regs->pc */
+extern void single_step_once(struct pt_regs *regs);
+
+struct task_struct;
+
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+			 int error_code);
+
+#ifdef __tilegx__
+/* We need this since sigval_t has a user pointer in it, for GETSIGINFO etc. */
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define SINGLESTEP_STATE_MASK_IS_ENABLED      0x1
+#define SINGLESTEP_STATE_MASK_UPDATE          0x2
+#define SINGLESTEP_STATE_TARGET_LB              2
+#define SINGLESTEP_STATE_TARGET_UB              7
+
+#endif /* !__KERNEL__ */
+
+#endif /* _ASM_TILE_PTRACE_H */
diff --git a/arch/tile/include/asm/resource.h b/arch/tile/include/asm/resource.h
new file mode 100644
index 00000000000..04bc4db8921
--- /dev/null
+++ b/arch/tile/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/tile/include/asm/scatterlist.h b/arch/tile/include/asm/scatterlist.h
new file mode 100644
index 00000000000..c5604242c0d
--- /dev/null
+++ b/arch/tile/include/asm/scatterlist.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SCATTERLIST_H
+#define _ASM_TILE_SCATTERLIST_H
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#include <asm-generic/scatterlist.h>
+
+#endif /* _ASM_TILE_SCATTERLIST_H */
diff --git a/arch/tile/include/asm/sections.h b/arch/tile/include/asm/sections.h
new file mode 100644
index 00000000000..d062d463fca
--- /dev/null
+++ b/arch/tile/include/asm/sections.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SECTIONS_H
+#define _ASM_TILE_SECTIONS_H
+
+#define arch_is_kernel_data arch_is_kernel_data
+
+#include <asm-generic/sections.h>
+
+/* Text and data are at different areas in the kernel VA space. */
+extern char _sinitdata[], _einitdata[];
+
+/* Write-once data is writable only till the end of initialization. */
+extern char __w1data_begin[], __w1data_end[];
+
+
+/* Not exactly sections, but PC comparison points in the code. */
+extern char __rt_sigreturn[], __rt_sigreturn_end[];
+#ifndef __tilegx__
+extern char sys_cmpxchg[], __sys_cmpxchg_end[];
+extern char __sys_cmpxchg_grab_lock[];
+extern char __start_atomic_asm_code[], __end_atomic_asm_code[];
+#endif
+
+/* Handle the discontiguity between _sdata and _stext. */
+static inline int arch_is_kernel_data(unsigned long addr)
+{
+	return addr >= (unsigned long)_sdata &&
+		addr < (unsigned long)_end;
+}
+
+#endif /* _ASM_TILE_SECTIONS_H */
diff --git a/arch/tile/include/asm/sembuf.h b/arch/tile/include/asm/sembuf.h
new file mode 100644
index 00000000000..7673b83cfef
--- /dev/null
+++ b/arch/tile/include/asm/sembuf.h
@@ -0,0 +1 @@
+#include <asm-generic/sembuf.h>
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
new file mode 100644
index 00000000000..823ddd47ff6
--- /dev/null
+++ b/arch/tile/include/asm/setup.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SETUP_H
+#define _ASM_TILE_SETUP_H
+
+#include <linux/pfn.h>
+#include <linux/init.h>
+
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN	PFN_DOWN(MAXMEM)
+
+#define COMMAND_LINE_SIZE	2048
+
+void early_panic(const char *fmt, ...);
+void warn_early_printk(void);
+void __init disable_early_printk(void);
+
+#endif /* _ASM_TILE_SETUP_H */
diff --git a/arch/tile/include/asm/shmbuf.h b/arch/tile/include/asm/shmbuf.h
new file mode 100644
index 00000000000..83c05fc2de3
--- /dev/null
+++ b/arch/tile/include/asm/shmbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/shmbuf.h>
diff --git a/arch/tile/include/asm/shmparam.h b/arch/tile/include/asm/shmparam.h
new file mode 100644
index 00000000000..93f30deb95d
--- /dev/null
+++ b/arch/tile/include/asm/shmparam.h
@@ -0,0 +1 @@
+#include <asm-generic/shmparam.h>
diff --git a/arch/tile/include/asm/sigcontext.h b/arch/tile/include/asm/sigcontext.h
new file mode 100644
index 00000000000..7cd7672e3ad
--- /dev/null
+++ b/arch/tile/include/asm/sigcontext.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SIGCONTEXT_H
+#define _ASM_TILE_SIGCONTEXT_H
+
+/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
+#include <asm/ptrace.h>
+
+/* Must track <sys/ucontext.h> */
+
+struct sigcontext {
+	struct pt_regs regs;
+};
+
+#endif /* _ASM_TILE_SIGCONTEXT_H */
diff --git a/arch/tile/include/asm/sigframe.h b/arch/tile/include/asm/sigframe.h
new file mode 100644
index 00000000000..994d3d30205
--- /dev/null
+++ b/arch/tile/include/asm/sigframe.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SIGFRAME_H
+#define _ASM_TILE_SIGFRAME_H
+
+/* Indicate that syscall return should not examine r0 */
+#define INT_SWINT_1_SIGRETURN (~0)
+
+#ifndef __ASSEMBLY__
+
+#include <arch/abi.h>
+
+struct rt_sigframe {
+	unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_SIGFRAME_H */
diff --git a/arch/tile/include/asm/siginfo.h b/arch/tile/include/asm/siginfo.h
new file mode 100644
index 00000000000..0c12d1b9ddf
--- /dev/null
+++ b/arch/tile/include/asm/siginfo.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SIGINFO_H
+#define _ASM_TILE_SIGINFO_H
+
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * Additional Tile-specific SIGILL si_codes
+ */
+#define ILL_DBLFLT	(__SI_FAULT|9)	/* double fault */
+#define ILL_HARDWALL	(__SI_FAULT|10)	/* user networks hardwall violation */
+#undef NSIGILL
+#define NSIGILL		10
+
+#endif /* _ASM_TILE_SIGINFO_H */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
new file mode 100644
index 00000000000..eb0253f3220
--- /dev/null
+++ b/arch/tile/include/asm/signal.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SIGNAL_H
+#define _ASM_TILE_SIGNAL_H
+
+/* Do not notify a ptracer when this signal is handled. */
+#define SA_NOPTRACE 0x02000000u
+
+/* Used in earlier Tilera releases, so keeping for binary compatibility. */
+#define SA_RESTORER 0x04000000u
+
+#include <asm-generic/signal.h>
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
+void do_signal(struct pt_regs *regs);
+#endif
+
+#endif /* _ASM_TILE_SIGNAL_H */
diff --git a/arch/tile/include/asm/smp.h b/arch/tile/include/asm/smp.h
new file mode 100644
index 00000000000..532124ae4b1
--- /dev/null
+++ b/arch/tile/include/asm/smp.h
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SMP_H
+#define _ASM_TILE_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include <asm/processor.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+#include <hv/hypervisor.h>
+
+/* Set up this tile to support receiving hypervisor messages */
+void init_messaging(void);
+
+/* Set up this tile to support receiving device interrupts and IPIs. */
+void init_per_tile_IRQs(void);
+
+/* Send a message to processors specified in mask */
+void send_IPI_many(const struct cpumask *mask, int tag);
+
+/* Send a message to all but the sending processor */
+void send_IPI_allbutself(int tag);
+
+/* Send a message to a specific processor */
+void send_IPI_single(int dest, int tag);
+
+/* Process an IPI message */
+void evaluate_message(int tag);
+
+/* Boot a secondary cpu */
+void online_secondary(void);
+
+/* Call a function on a specified set of CPUs (may include this one). */
+extern void on_each_cpu_mask(const struct cpumask *mask,
+			     void (*func)(void *), void *info, bool wait);
+
+/* Topology of the supervisor tile grid, and coordinates of boot processor */
+extern HV_Topology smp_topology;
+
+/* Accessors for grid size */
+#define smp_height		(smp_topology.height)
+#define smp_width		(smp_topology.width)
+
+/* Convenience functions for converting cpu <-> coords. */
+static inline int cpu_x(int cpu)
+{
+	return cpu % smp_width;
+}
+static inline int cpu_y(int cpu)
+{
+	return cpu / smp_width;
+}
+static inline int xy_to_cpu(int x, int y)
+{
+	return y * smp_width + x;
+}
+
+/* Hypervisor message tags sent via the tile send_IPI*() routines. */
+#define MSG_TAG_START_CPU		1
+#define MSG_TAG_STOP_CPU		2
+#define MSG_TAG_CALL_FUNCTION_MANY	3
+#define MSG_TAG_CALL_FUNCTION_SINGLE	4
+
+/* Hook for the generic smp_call_function_many() routine. */
+static inline void arch_send_call_function_ipi_mask(struct cpumask *mask)
+{
+	send_IPI_many(mask, MSG_TAG_CALL_FUNCTION_MANY);
+}
+
+/* Hook for the generic smp_call_function_single() routine. */
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	send_IPI_single(cpu, MSG_TAG_CALL_FUNCTION_SINGLE);
+}
+
+/* Print out the boot string describing which cpus were disabled. */
+void print_disabled_cpus(void);
+
+#else /* !CONFIG_SMP */
+
+#define on_each_cpu_mask(mask, func, info, wait)		\
+  do { if (cpumask_test_cpu(0, (mask))) func(info); } while (0)
+
+#define smp_master_cpu		0
+#define smp_height		1
+#define smp_width		1
+#define cpu_x(cpu)		0
+#define cpu_y(cpu)		0
+#define xy_to_cpu(x, y)		0
+
+#endif /* !CONFIG_SMP */
+
+
+/* Which cpus may be used as the lotar in a page table entry. */
+extern struct cpumask cpu_lotar_map;
+#define cpu_is_valid_lotar(cpu) cpumask_test_cpu((cpu), &cpu_lotar_map)
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Which processors are used for hash-for-home mapping */
+extern struct cpumask hash_for_home_map;
+#endif
+
+/* Which cpus can have their cache flushed by hv_flush_remote(). */
+extern struct cpumask cpu_cacheable_map;
+#define cpu_cacheable(cpu) cpumask_test_cpu((cpu), &cpu_cacheable_map)
+
+/* Convert an HV_LOTAR value into a cpu. */
+static inline int hv_lotar_to_cpu(HV_LOTAR lotar)
+{
+	return HV_LOTAR_X(lotar) + (HV_LOTAR_Y(lotar) * smp_width);
+}
+
+/*
+ * Extension of <linux/cpumask.h> functionality when you just want
+ * to express a mask or suppression or inclusion region without
+ * being too concerned about exactly which cpus are valid in that region.
+ */
+int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits);
+
+#define cpulist_parse_crop(buf, dst) \
+			__cpulist_parse_crop((buf), (dst), NR_CPUS)
+static inline int __cpulist_parse_crop(const char *buf, struct cpumask *dstp,
+					int nbits)
+{
+	return bitmap_parselist_crop(buf, cpumask_bits(dstp), nbits);
+}
+
+/* Initialize the IPI subsystem. */
+void ipi_init(void);
+
+/* Function for start-cpu message to cause us to jump to. */
+extern unsigned long start_cpu_function_addr;
+
+#endif /* _ASM_TILE_SMP_H */
diff --git a/arch/tile/include/asm/socket.h b/arch/tile/include/asm/socket.h
new file mode 100644
index 00000000000..6b71384b9d8
--- /dev/null
+++ b/arch/tile/include/asm/socket.h
@@ -0,0 +1 @@
+#include <asm-generic/socket.h>
diff --git a/arch/tile/include/asm/sockios.h b/arch/tile/include/asm/sockios.h
new file mode 100644
index 00000000000..def6d4746ee
--- /dev/null
+++ b/arch/tile/include/asm/sockios.h
@@ -0,0 +1 @@
+#include <asm-generic/sockios.h>
diff --git a/arch/tile/include/asm/spinlock.h b/arch/tile/include/asm/spinlock.h
new file mode 100644
index 00000000000..1a8bd4740c2
--- /dev/null
+++ b/arch/tile/include/asm/spinlock.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_H
+#define _ASM_TILE_SPINLOCK_H
+
+#ifdef __tilegx__
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+
+#endif /* _ASM_TILE_SPINLOCK_H */
diff --git a/arch/tile/include/asm/spinlock_32.h b/arch/tile/include/asm/spinlock_32.h
new file mode 100644
index 00000000000..88efdde8dd2
--- /dev/null
+++ b/arch/tile/include/asm/spinlock_32.h
@@ -0,0 +1,199 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * 32-bit SMP spinlocks.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_32_H
+#define _ASM_TILE_SPINLOCK_32_H
+
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <linux/compiler.h>
+
+/*
+ * We only use even ticket numbers so the '1' inserted by a tns is
+ * an unambiguous "ticket is busy" flag.
+ */
+#define TICKET_QUANTUM 2
+
+
+/*
+ * SMP ticket spinlocks, allowing only a single CPU anywhere
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+	/*
+	 * Note that even if a new ticket is in the process of being
+	 * acquired, so lock->next_ticket is 1, it's still reasonable
+	 * to claim the lock is held, since it will be momentarily
+	 * if not already.  There's no need to wait for a "valid"
+	 * lock->next_ticket to become available.
+	 */
+	return lock->next_ticket != lock->current_ticket;
+}
+
+void arch_spin_lock(arch_spinlock_t *lock);
+
+/* We cannot take an interrupt after getting a ticket, so don't enable them. */
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+int arch_spin_trylock(arch_spinlock_t *lock);
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+	/* For efficiency, overlap fetching the old ticket with the wmb(). */
+	int old_ticket = lock->current_ticket;
+	wmb();  /* guarantee anything modified under the lock is visible */
+	lock->current_ticket = old_ticket + TICKET_QUANTUM;
+}
+
+void arch_spin_unlock_wait(arch_spinlock_t *lock);
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * We use a "tns/store-back" technique on a single word to manage
+ * the lock state, looping around to retry if the tns returns 1.
+ */
+
+/* Internal layout of the word; do not use. */
+#define _WR_NEXT_SHIFT	8
+#define _WR_CURR_SHIFT  16
+#define _WR_WIDTH       8
+#define _RD_COUNT_SHIFT 24
+#define _RD_COUNT_WIDTH 8
+
+/* Internal functions; do not use. */
+void arch_read_lock_slow(arch_rwlock_t *, u32);
+int arch_read_trylock_slow(arch_rwlock_t *);
+void arch_read_unlock_slow(arch_rwlock_t *);
+void arch_write_lock_slow(arch_rwlock_t *, u32);
+void arch_write_unlock_slow(arch_rwlock_t *, u32);
+
+/**
+ * arch_read_can_lock() - would read_trylock() succeed?
+ */
+static inline int arch_read_can_lock(arch_rwlock_t *rwlock)
+{
+	return (rwlock->lock << _RD_COUNT_WIDTH) == 0;
+}
+
+/**
+ * arch_write_can_lock() - would write_trylock() succeed?
+ */
+static inline int arch_write_can_lock(arch_rwlock_t *rwlock)
+{
+	return rwlock->lock == 0;
+}
+
+/**
+ * arch_read_lock() - acquire a read lock.
+ */
+static inline void arch_read_lock(arch_rwlock_t *rwlock)
+{
+	u32 val = __insn_tns((int *)&rwlock->lock);
+	if (unlikely(val << _RD_COUNT_WIDTH)) {
+		arch_read_lock_slow(rwlock, val);
+		return;
+	}
+	rwlock->lock = val + (1 << _RD_COUNT_SHIFT);
+}
+
+/**
+ * arch_read_lock() - acquire a write lock.
+ */
+static inline void arch_write_lock(arch_rwlock_t *rwlock)
+{
+	u32 val = __insn_tns((int *)&rwlock->lock);
+	if (unlikely(val != 0)) {
+		arch_write_lock_slow(rwlock, val);
+		return;
+	}
+	rwlock->lock = 1 << _WR_NEXT_SHIFT;
+}
+
+/**
+ * arch_read_trylock() - try to acquire a read lock.
+ */
+static inline int arch_read_trylock(arch_rwlock_t *rwlock)
+{
+	int locked;
+	u32 val = __insn_tns((int *)&rwlock->lock);
+	if (unlikely(val & 1))
+		return arch_read_trylock_slow(rwlock);
+	locked = (val << _RD_COUNT_WIDTH) == 0;
+	rwlock->lock = val + (locked << _RD_COUNT_SHIFT);
+	return locked;
+}
+
+/**
+ * arch_write_trylock() - try to acquire a write lock.
+ */
+static inline int arch_write_trylock(arch_rwlock_t *rwlock)
+{
+	u32 val = __insn_tns((int *)&rwlock->lock);
+
+	/*
+	 * If a tns is in progress, or there's a waiting or active locker,
+	 * or active readers, we can't take the lock, so give up.
+	 */
+	if (unlikely(val != 0)) {
+		if (!(val & 1))
+			rwlock->lock = val;
+		return 0;
+	}
+
+	/* Set the "next" field to mark it locked. */
+	rwlock->lock = 1 << _WR_NEXT_SHIFT;
+	return 1;
+}
+
+/**
+ * arch_read_unlock() - release a read lock.
+ */
+static inline void arch_read_unlock(arch_rwlock_t *rwlock)
+{
+	u32 val;
+	mb();  /* guarantee anything modified under the lock is visible */
+	val = __insn_tns((int *)&rwlock->lock);
+	if (unlikely(val & 1)) {
+		arch_read_unlock_slow(rwlock);
+		return;
+	}
+	rwlock->lock = val - (1 << _RD_COUNT_SHIFT);
+}
+
+/**
+ * arch_write_unlock() - release a write lock.
+ */
+static inline void arch_write_unlock(arch_rwlock_t *rwlock)
+{
+	u32 val;
+	mb();  /* guarantee anything modified under the lock is visible */
+	val = __insn_tns((int *)&rwlock->lock);
+	if (unlikely(val != (1 << _WR_NEXT_SHIFT))) {
+		arch_write_unlock_slow(rwlock, val);
+		return;
+	}
+	rwlock->lock = 0;
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#endif /* _ASM_TILE_SPINLOCK_32_H */
diff --git a/arch/tile/include/asm/spinlock_types.h b/arch/tile/include/asm/spinlock_types.h
new file mode 100644
index 00000000000..a71f59b49c5
--- /dev/null
+++ b/arch/tile/include/asm/spinlock_types.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_TYPES_H
+#define _ASM_TILE_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+#ifdef __tilegx__
+
+/* Low 15 bits are "next"; high 15 bits are "current". */
+typedef struct arch_spinlock {
+	unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
+
+/* High bit is "writer owns"; low 31 bits are a count of readers. */
+typedef struct arch_rwlock {
+	unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
+
+#else
+
+typedef struct arch_spinlock {
+	/* Next ticket number to hand out. */
+	int next_ticket;
+	/* The ticket number that currently owns this lock. */
+	int current_ticket;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0, 0 }
+
+/*
+ * Byte 0 for tns (only the low bit is used), byte 1 for ticket-lock "next",
+ * byte 2 for ticket-lock "current", byte 3 for reader count.
+ */
+typedef struct arch_rwlock {
+	unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
+#endif /* _ASM_TILE_SPINLOCK_TYPES_H */
diff --git a/arch/tile/include/asm/stack.h b/arch/tile/include/asm/stack.h
new file mode 100644
index 00000000000..f908473c322
--- /dev/null
+++ b/arch/tile/include/asm/stack.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_STACK_H
+#define _ASM_TILE_STACK_H
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/backtrace.h>
+#include <hv/hypervisor.h>
+
+/* Everything we need to keep track of a backtrace iteration */
+struct KBacktraceIterator {
+	BacktraceIterator it;
+	struct task_struct *task;     /* task we are backtracing */
+	HV_PTE *pgtable;	      /* page table for user space access */
+	int end;		      /* iteration complete. */
+	int new_context;              /* new context is starting */
+	int profile;                  /* profiling, so stop on async intrpt */
+	int verbose;		      /* printk extra info (don't want to
+				       * do this for profiling) */
+	int is_current;               /* backtracing current task */
+};
+
+/* Iteration methods for kernel backtraces */
+
+/*
+ * Initialize a KBacktraceIterator from a task_struct, and optionally from
+ * a set of registers.  If the registers are omitted, the process is
+ * assumed to be descheduled, and registers are read from the process's
+ * thread_struct and stack.  "verbose" means to printk some additional
+ * information about fault handlers as we pass them on the stack.
+ */
+extern void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
+				    struct task_struct *, struct pt_regs *);
+
+/* Initialize iterator based on current stack. */
+extern void KBacktraceIterator_init_current(struct KBacktraceIterator *kbt);
+
+/* Helper method for above. */
+extern void _KBacktraceIterator_init_current(struct KBacktraceIterator *kbt,
+				ulong pc, ulong lr, ulong sp, ulong r52);
+
+/* No more frames? */
+extern int KBacktraceIterator_end(struct KBacktraceIterator *kbt);
+
+/* Advance to the next frame. */
+extern void KBacktraceIterator_next(struct KBacktraceIterator *kbt);
+
+/*
+ * Dump stack given complete register info. Use only from the
+ * architecture-specific code; show_stack()
+ * and dump_stack() (in entry.S) are architecture-independent entry points.
+ */
+extern void tile_show_stack(struct KBacktraceIterator *, int headers);
+
+/* Dump stack of current process, with registers to seed the backtrace. */
+extern void dump_stack_regs(struct pt_regs *);
+
+/* Helper method for assembly dump_stack(). */
+extern void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52);
+
+#endif /* _ASM_TILE_STACK_H */
diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/asm/stat.h
new file mode 100644
index 00000000000..3dc90fa92c7
--- /dev/null
+++ b/arch/tile/include/asm/stat.h
@@ -0,0 +1 @@
+#include <asm-generic/stat.h>
diff --git a/arch/tile/include/asm/statfs.h b/arch/tile/include/asm/statfs.h
new file mode 100644
index 00000000000..0b91fe198c2
--- /dev/null
+++ b/arch/tile/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/tile/include/asm/string.h b/arch/tile/include/asm/string.h
new file mode 100644
index 00000000000..7535cf1a30e
--- /dev/null
+++ b/arch/tile/include/asm/string.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_STRING_H
+#define _ASM_TILE_STRING_H
+
+#define __HAVE_ARCH_MEMCHR
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_STRCHR
+#define __HAVE_ARCH_STRLEN
+
+extern __kernel_size_t strlen(const char *);
+extern char *strchr(const char *s, int c);
+extern void *memchr(const void *s, int c, size_t n);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#endif /* _ASM_TILE_STRING_H */
diff --git a/arch/tile/include/asm/swab.h b/arch/tile/include/asm/swab.h
new file mode 100644
index 00000000000..25c686a00f1
--- /dev/null
+++ b/arch/tile/include/asm/swab.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SWAB_H
+#define _ASM_TILE_SWAB_H
+
+/* Tile gcc is always >= 4.3.0, so we use __builtin_bswap. */
+#define __arch_swab32(x) __builtin_bswap32(x)
+#define __arch_swab64(x) __builtin_bswap64(x)
+
+/* Use the variant that is natural for the wordsize. */
+#ifdef CONFIG_64BIT
+#define __arch_swab16(x) (__builtin_bswap64(x) >> 48)
+#else
+#define __arch_swab16(x) (__builtin_bswap32(x) >> 16)
+#endif
+
+#endif /* _ASM_TILE_SWAB_H */
diff --git a/arch/tile/include/asm/syscall.h b/arch/tile/include/asm/syscall.h
new file mode 100644
index 00000000000..d35e0dcb67b
--- /dev/null
+++ b/arch/tile/include/asm/syscall.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_TILE_SYSCALL_H
+#define _ASM_TILE_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <arch/abi.h>
+
+/*
+ * Only the low 32 bits of orig_r0 are meaningful, so we return int.
+ * This importantly ignores the high bits on 64-bit, so comparisons
+ * sign-extend the low 32 bits.
+ */
+static inline int syscall_get_nr(struct task_struct *t, struct pt_regs *regs)
+{
+	return regs->regs[TREG_SYSCALL_NR];
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->regs[0] = regs->orig_r0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->regs[0];
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->regs[0];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->regs[0] = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(args, &regs[i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs[i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_TILE_SYSCALL_H */
diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h
new file mode 100644
index 00000000000..af165a74537
--- /dev/null
+++ b/arch/tile/include/asm/syscalls.h
@@ -0,0 +1,108 @@
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh Rajput
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SYSCALLS_H
+#define _ASM_TILE_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <linux/compat.h>
+
+/* The array of function pointers for syscalls. */
+extern void *sys_call_table[];
+#ifdef CONFIG_COMPAT
+extern void *compat_sys_call_table[];
+#endif
+
+/*
+ * Note that by convention, any syscall which requires the current
+ * register set takes an additional "struct pt_regs *" pointer; the
+ * sys_xxx() function just adds the pointer and tail-calls to _sys_xxx().
+ */
+
+/* kernel/sys.c */
+ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count);
+long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
+		     u32 len, int advice);
+int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
+		       u32 len_lo, u32 len_hi, int advice);
+long sys_flush_cache(void);
+long sys_mmap2(unsigned long addr, unsigned long len,
+	       unsigned long prot, unsigned long flags,
+	       unsigned long fd, unsigned long pgoff);
+#ifdef __tilegx__
+long sys_mmap(unsigned long addr, unsigned long len,
+	      unsigned long prot, unsigned long flags,
+	      unsigned long fd, off_t pgoff);
+#endif
+
+/* kernel/process.c */
+long sys_clone(unsigned long clone_flags, unsigned long newsp,
+	       void __user *parent_tid, void __user *child_tid);
+long _sys_clone(unsigned long clone_flags, unsigned long newsp,
+		void __user *parent_tid, void __user *child_tid,
+		struct pt_regs *regs);
+long sys_fork(void);
+long _sys_fork(struct pt_regs *regs);
+long sys_vfork(void);
+long _sys_vfork(struct pt_regs *regs);
+long sys_execve(char __user *filename, char __user * __user *argv,
+		char __user * __user *envp);
+long _sys_execve(char __user *filename, char __user * __user *argv,
+		 char __user * __user *envp, struct pt_regs *regs);
+
+/* kernel/signal.c */
+long sys_sigaltstack(const stack_t __user *, stack_t __user *);
+long _sys_sigaltstack(const stack_t __user *, stack_t __user *,
+		      struct pt_regs *);
+long sys_rt_sigreturn(void);
+long _sys_rt_sigreturn(struct pt_regs *regs);
+
+/* platform-independent functions */
+long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize);
+long sys_rt_sigaction(int sig, const struct sigaction __user *act,
+		      struct sigaction __user *oact, size_t sigsetsize);
+
+#ifndef __tilegx__
+/* mm/fault.c */
+int sys_cmpxchg_badaddr(unsigned long address);
+int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *);
+#endif
+
+#ifdef CONFIG_COMPAT
+long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+		       compat_uptr_t __user *envp);
+long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+			compat_uptr_t __user *envp, struct pt_regs *regs);
+long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+			    struct compat_sigaltstack __user *uoss_ptr);
+long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+			     struct compat_sigaltstack __user *uoss_ptr,
+			     struct pt_regs *regs);
+long compat_sys_rt_sigreturn(void);
+long _compat_sys_rt_sigreturn(struct pt_regs *regs);
+
+/* These four are not defined for 64-bit, but serve as "compat" syscalls. */
+long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg);
+long sys_fstat64(unsigned long fd, struct stat64 __user *statbuf);
+long sys_truncate64(const char __user *path, loff_t length);
+long sys_ftruncate64(unsigned int fd, loff_t length);
+#endif
+
+#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h
new file mode 100644
index 00000000000..f749be327ce
--- /dev/null
+++ b/arch/tile/include/asm/system.h
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_SYSTEM_H
+#define _ASM_TILE_SYSTEM_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
+#include <asm/ptrace.h>
+
+#include <arch/chip.h>
+#include <arch/sim_def.h>
+#include <arch/spr_def.h>
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier.  All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads.  This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies.  See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	b = 2;
+ *	memory_barrier();
+ *	p = &b;				q = p;
+ *					read_barrier_depends();
+ *					d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends().  However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ *	CPU 0				CPU 1
+ *
+ *	a = 2;
+ *	memory_barrier();
+ *	b = 3;				y = b;
+ *					read_barrier_depends();
+ *					x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b".  Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+
+#define read_barrier_depends()	do { } while (0)
+
+#define __sync()	__insn_mf()
+
+#if CHIP_HAS_SPLIT_CYCLE()
+#define get_cycles_low() __insn_mfspr(SPR_CYCLE_LOW)
+#else
+#define get_cycles_low() __insn_mfspr(SPR_CYCLE)   /* just get all 64 bits */
+#endif
+
+/* Fence to guarantee visibility of stores to incoherent memory. */
+static inline void
+mb_incoherent(void)
+{
+	__insn_mf();
+
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+	{
+		int __mb_incoherent(void);
+#if CHIP_HAS_TILE_WRITE_PENDING()
+		const unsigned long WRITE_TIMEOUT_CYCLES = 400;
+		unsigned long start = get_cycles_low();
+		do {
+			if (__insn_mfspr(SPR_TILE_WRITE_PENDING) == 0)
+				return;
+		} while ((get_cycles_low() - start) < WRITE_TIMEOUT_CYCLES);
+#endif /* CHIP_HAS_TILE_WRITE_PENDING() */
+		(void) __mb_incoherent();
+	}
+#endif /* CHIP_HAS_MF_WAITS_FOR_VICTIMS() */
+}
+
+#define fast_wmb()	__sync()
+#define fast_rmb()	__sync()
+#define fast_mb()	__sync()
+#define fast_iob()	mb_incoherent()
+
+#define wmb()		fast_wmb()
+#define rmb()		fast_rmb()
+#define mb()		fast_mb()
+#define iob()		fast_iob()
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while (0)
+#endif
+
+#define set_mb(var, value) \
+	do { var = value; mb(); } while (0)
+
+/*
+ * Pause the DMA engine and static network before task switching.
+ */
+#define prepare_arch_switch(next) _prepare_arch_switch(next)
+void _prepare_arch_switch(struct task_struct *next);
+
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ * The number of callee-saved registers saved on the kernel stack
+ * is defined here for use in copy_thread() and must agree with __switch_to().
+ */
+#endif /* !__ASSEMBLY__ */
+#define CALLEE_SAVED_FIRST_REG 30
+#define CALLEE_SAVED_REGS_COUNT 24   /* r30 to r52, plus an empty to align */
+#ifndef __ASSEMBLY__
+struct task_struct;
+#define switch_to(prev, next, last) ((last) = _switch_to((prev), (next)))
+extern struct task_struct *_switch_to(struct task_struct *prev,
+				      struct task_struct *next);
+
+/* Helper function for _switch_to(). */
+extern struct task_struct *__switch_to(struct task_struct *prev,
+				       struct task_struct *next,
+				       unsigned long new_system_save_1_0);
+
+/* Address that switched-away from tasks are at. */
+extern unsigned long get_switch_to_pc(void);
+
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible:
+ *
+ * TODO: fill this in!
+ */
+static inline void sched_cacheflush(void)
+{
+}
+
+#define arch_align_stack(x) (x)
+
+/*
+ * Is the kernel doing fixups of unaligned accesses?  If <0, no kernel
+ * intervention occurs and SIGBUS is delivered with no data address
+ * info.  If 0, the kernel single-steps the instruction to discover
+ * the data address to provide with the SIGBUS.  If 1, the kernel does
+ * a fixup.
+ */
+extern int unaligned_fixup;
+
+/* Is the kernel printing on each unaligned fixup? */
+extern int unaligned_printk;
+
+/* Number of unaligned fixups performed */
+extern unsigned int unaligned_fixup_count;
+
+/* Init-time routine to do tile-specific per-cpu setup. */
+void setup_cpu(int boot);
+
+/* User-level DMA management functions */
+void grant_dma_mpls(void);
+void restrict_dma_mpls(void);
+
+#ifdef CONFIG_HARDWALL
+/* User-level network management functions */
+void reset_network_state(void);
+void grant_network_mpls(void);
+void restrict_network_mpls(void);
+int hardwall_deactivate(struct task_struct *task);
+
+/* Hook hardwall code into changes in affinity. */
+#define arch_set_cpus_allowed(p, new_mask) do { \
+	if (p->thread.hardwall && !cpumask_equal(&p->cpus_allowed, new_mask)) \
+		hardwall_deactivate(p); \
+} while (0)
+#endif
+
+/* Invoke the simulator "syscall" mechanism (see arch/tile/kernel/entry.S). */
+extern int _sim_syscall(int syscall_num, ...);
+#define sim_syscall(syscall_num, ...) \
+	_sim_syscall(SIM_CONTROL_SYSCALL + \
+		((syscall_num) << _SIM_CONTROL_OPERATOR_BITS), \
+		## __VA_ARGS__)
+
+/*
+ * Kernel threads can check to see if they need to migrate their
+ * stack whenever they return from a context switch; for user
+ * threads, we defer until they are returning to user-space.
+ */
+#define finish_arch_switch(prev) do {                                     \
+	if (unlikely((prev)->state == TASK_DEAD))                         \
+		__insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_EXIT |       \
+			((prev)->pid << _SIM_CONTROL_OPERATOR_BITS));     \
+	__insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_SWITCH |             \
+		(current->pid << _SIM_CONTROL_OPERATOR_BITS));            \
+	if (current->mm == NULL && !kstack_hash &&                        \
+	    current_thread_info()->homecache_cpu != smp_processor_id())   \
+		homecache_migrate_kthread();                              \
+} while (0)
+
+/* Support function for forking a new task. */
+void ret_from_fork(void);
+
+/* Called from ret_from_fork() when a new process starts up. */
+struct task_struct *sim_notify_fork(struct task_struct *prev);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_SYSTEM_H */
diff --git a/arch/tile/include/asm/termbits.h b/arch/tile/include/asm/termbits.h
new file mode 100644
index 00000000000..3935b106de7
--- /dev/null
+++ b/arch/tile/include/asm/termbits.h
@@ -0,0 +1 @@
+#include <asm-generic/termbits.h>
diff --git a/arch/tile/include/asm/termios.h b/arch/tile/include/asm/termios.h
new file mode 100644
index 00000000000..280d78a9d96
--- /dev/null
+++ b/arch/tile/include/asm/termios.h
@@ -0,0 +1 @@
+#include <asm-generic/termios.h>
diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h
new file mode 100644
index 00000000000..3872f2b345d
--- /dev/null
+++ b/arch/tile/include/asm/thread_info.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_THREAD_INFO_H
+#define _ASM_TILE_THREAD_INFO_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#ifndef __ASSEMBLY__
+
+/*
+ * Low level task data that assembly code needs immediate access to.
+ * The structure is placed at the bottom of the supervisor stack.
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned long		status;		/* thread-synchronous flags */
+	__u32			homecache_cpu;	/* CPU we are homecached on */
+	__u32			cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space
+						   (KERNEL_DS or USER_DS) */
+	struct restart_block	restart_block;
+	struct single_step_state *step_state;	/* single step state
+						   (if non-zero) */
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.step_state	= NULL,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+#endif /* !__ASSEMBLY__ */
+
+#if PAGE_SIZE < 8192
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
+#else
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define LOG2_THREAD_SIZE (PAGE_SHIFT + THREAD_SIZE_ORDER)
+
+#define STACK_WARN             (THREAD_SIZE/8)
+
+#ifndef __ASSEMBLY__
+
+/* How to get the thread information struct from C. */
+register unsigned long stack_pointer __asm__("sp");
+
+#define current_thread_info() \
+  ((struct thread_info *)(stack_pointer & -THREAD_SIZE))
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+extern struct thread_info *alloc_thread_info(struct task_struct *task);
+extern void free_thread_info(struct thread_info *info);
+
+/* Sit on a nap instruction until interrupted. */
+extern void smp_nap(void);
+
+/* Enable interrupts racelessly and nap forever: helper for cpu_idle(). */
+extern void _cpu_idle(void);
+
+/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
+extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
+				  unsigned long new_sp,
+				  unsigned long new_ss10);
+
+#else /* __ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#ifdef __tilegx__
+#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#else
+#define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * Thread information flags that various assembly files may need to access.
+ * Keep flags accessed frequently in low bits, particular since it makes
+ * it easier to build constants in assembly.
+ */
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
+#define TIF_SINGLESTEP		2	/* restore singlestep on return to
+					   user mode */
+#define TIF_ASYNC_TLB		3	/* got an async TLB fault in kernel */
+#define TIF_SYSCALL_TRACE	4	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_MEMDIE		7	/* OOM killer at work */
+
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_ASYNC_TLB		(1<<TIF_ASYNC_TLB)
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+
+/* Work to do on any return to user space. */
+#define _TIF_ALLWORK_MASK \
+  (_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SINGLESTEP|_TIF_ASYNC_TLB)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#ifdef __tilegx__
+#define TS_COMPAT		0x0001	/* 32-bit compatibility mode */
+#endif
+#define TS_POLLING		0x0004	/* in idle loop but not sleeping */
+#define TS_RESTORE_SIGMASK	0x0008	/* restore signal mask in do_signal */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_THREAD_INFO_H */
diff --git a/arch/tile/include/asm/timex.h b/arch/tile/include/asm/timex.h
new file mode 100644
index 00000000000..3baf5fc4c0a
--- /dev/null
+++ b/arch/tile/include/asm/timex.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_TIMEX_H
+#define _ASM_TILE_TIMEX_H
+
+/*
+ * This rate should be a multiple of the possible HZ values (100, 250, 1000)
+ * and a fraction of the possible hardware timer frequencies.  Our timer
+ * frequency is highly tunable but also quite precise, so for the primary use
+ * of this value (setting ACT_HZ from HZ) we just pick a value that causes
+ * ACT_HZ to be set to HZ.  We make the value somewhat large just to be
+ * more robust in case someone tries out a new value of HZ.
+ */
+#define CLOCK_TICK_RATE	1000000
+
+typedef unsigned long long cycles_t;
+
+#if CHIP_HAS_SPLIT_CYCLE()
+cycles_t get_cycles(void);
+#else
+static inline cycles_t get_cycles(void)
+{
+	return __insn_mfspr(SPR_CYCLE);
+}
+#endif
+
+cycles_t get_clock_rate(void);
+
+/* Called at cpu initialization to set some low-level constants. */
+void setup_clock(void);
+
+/* Called at cpu initialization to start the tile-timer clock device. */
+void setup_tile_timer(void);
+
+#endif /* _ASM_TILE_TIMEX_H */
diff --git a/arch/tile/include/asm/tlb.h b/arch/tile/include/asm/tlb.h
new file mode 100644
index 00000000000..4a891a1a8df
--- /dev/null
+++ b/arch/tile/include/asm/tlb.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_TLB_H
+#define _ASM_TILE_TLB_H
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TILE_TLB_H */
diff --git a/arch/tile/include/asm/tlbflush.h b/arch/tile/include/asm/tlbflush.h
new file mode 100644
index 00000000000..96199d214fb
--- /dev/null
+++ b/arch/tile/include/asm/tlbflush.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_TLBFLUSH_H
+#define _ASM_TILE_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <hv/hypervisor.h>
+
+/*
+ * Rather than associating each mm with its own ASID, we just use
+ * ASIDs to allow us to lazily flush the TLB when we switch mms.
+ * This way we only have to do an actual TLB flush on mm switch
+ * every time we wrap ASIDs, not every single time we switch.
+ *
+ * FIXME: We might improve performance by keeping ASIDs around
+ * properly, though since the hypervisor direct-maps VAs to TSB
+ * entries, we're likely to have lost at least the executable page
+ * mappings by the time we switch back to the original mm.
+ */
+DECLARE_PER_CPU(int, current_asid);
+
+/* The hypervisor tells us what ASIDs are available to us. */
+extern int min_asid, max_asid;
+
+static inline unsigned long hv_page_size(const struct vm_area_struct *vma)
+{
+	return (vma->vm_flags & VM_HUGETLB) ? HPAGE_SIZE : PAGE_SIZE;
+}
+
+/* Pass as vma pointer for non-executable mapping, if no vma available. */
+#define FLUSH_NONEXEC ((const struct vm_area_struct *)-1UL)
+
+/* Flush a single user page on this cpu. */
+static inline void local_flush_tlb_page(const struct vm_area_struct *vma,
+					unsigned long addr,
+					unsigned long page_size)
+{
+	int rc = hv_flush_page(addr, page_size);
+	if (rc < 0)
+		panic("hv_flush_page(%#lx,%#lx) failed: %d",
+		      addr, page_size, rc);
+	if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC)))
+		__flush_icache();
+}
+
+/* Flush range of user pages on this cpu. */
+static inline void local_flush_tlb_pages(const struct vm_area_struct *vma,
+					 unsigned long addr,
+					 unsigned long page_size,
+					 unsigned long len)
+{
+	int rc = hv_flush_pages(addr, page_size, len);
+	if (rc < 0)
+		panic("hv_flush_pages(%#lx,%#lx,%#lx) failed: %d",
+		      addr, page_size, len, rc);
+	if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC)))
+		__flush_icache();
+}
+
+/* Flush all user pages on this cpu. */
+static inline void local_flush_tlb(void)
+{
+	int rc = hv_flush_all(1);   /* preserve global mappings */
+	if (rc < 0)
+		panic("hv_flush_all(1) failed: %d", rc);
+	__flush_icache();
+}
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+static inline void local_flush_tlb_all(void)
+{
+	int i;
+	for (i = 0; ; ++i) {
+		HV_VirtAddrRange r = hv_inquire_virtual(i);
+		if (r.size == 0)
+			break;
+		local_flush_tlb_pages(NULL, r.start, PAGE_SIZE, r.size);
+		local_flush_tlb_pages(NULL, r.start, HPAGE_SIZE, r.size);
+	}
+}
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *  - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
+ *
+ * Here (as in vm_area_struct), "end" means the first byte after
+ * our end address.
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(const struct vm_area_struct *, unsigned long);
+extern void flush_tlb_page_mm(const struct vm_area_struct *,
+			      struct mm_struct *, unsigned long);
+extern void flush_tlb_range(const struct vm_area_struct *,
+			    unsigned long start, unsigned long end);
+
+#define flush_tlb()     flush_tlb_current_task()
+
+#endif /* _ASM_TILE_TLBFLUSH_H */
diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h
new file mode 100644
index 00000000000..343172d422a
--- /dev/null
+++ b/arch/tile/include/asm/topology.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_TOPOLOGY_H
+#define _ASM_TILE_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cpumask.h>
+
+/* Mappings between logical cpu number and node number. */
+extern struct cpumask node_2_cpu_mask[];
+extern char cpu_2_node[];
+
+/* Returns the number of the node containing CPU 'cpu'. */
+static inline int cpu_to_node(int cpu)
+{
+	return cpu_2_node[cpu];
+}
+
+/*
+ * Returns the number of the node containing Node 'node'.
+ * This architecture is flat, so it is a pretty simple function!
+ */
+#define parent_node(node) (node)
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline const struct cpumask *cpumask_of_node(int node)
+{
+	return &node_2_cpu_mask[node];
+}
+
+/* For now, use numa node -1 for global allocation. */
+#define pcibus_to_node(bus)		((void)(bus), -1)
+
+/* sched_domains SD_NODE_INIT for TILE architecture */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_WAKE_AFFINE	\
+				| SD_SERIALIZE,		\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+/* By definition, we create nodes based on online memory. */
+#define node_has_online_mem(nid) 1
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)       ((void)(cpu), 0)
+#define topology_core_id(cpu)                   (cpu)
+#define topology_core_cpumask(cpu)              ((void)(cpu), cpu_online_mask)
+#define topology_thread_cpumask(cpu)            cpumask_of(cpu)
+
+/* indicates that pointers to the topology struct cpumask maps are valid */
+#define arch_provides_topology_pointers         yes
+#endif
+
+#endif /* _ASM_TILE_TOPOLOGY_H */
diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h
new file mode 100644
index 00000000000..432a9c15c8a
--- /dev/null
+++ b/arch/tile/include/asm/traps.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_TRAPS_H
+#define _ASM_TILE_TRAPS_H
+
+/* mm/fault.c */
+void do_page_fault(struct pt_regs *, int fault_num,
+		   unsigned long address, unsigned long write);
+void do_async_page_fault(struct pt_regs *);
+
+#ifndef __tilegx__
+/*
+ * We return this structure in registers to avoid having to write
+ * additional save/restore code in the intvec.S caller.
+ */
+struct intvec_state {
+	void *handler;
+	unsigned long vecnum;
+	unsigned long fault_num;
+	unsigned long info;
+	unsigned long retval;
+};
+struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
+				      unsigned long address,
+				      unsigned long info);
+#endif
+
+/* kernel/traps.c */
+void do_trap(struct pt_regs *, int fault_num, unsigned long reason);
+void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52);
+
+/* kernel/time.c */
+void do_timer_interrupt(struct pt_regs *, int fault_num);
+
+/* kernel/messaging.c */
+void hv_message_intr(struct pt_regs *, int intnum);
+
+/* kernel/irq.c */
+void tile_dev_intr(struct pt_regs *, int intnum);
+
+#ifdef CONFIG_HARDWALL
+/* kernel/hardwall.c */
+void do_hardwall_trap(struct pt_regs *, int fault_num);
+#endif
+
+/* kernel/ptrace.c */
+void do_breakpoint(struct pt_regs *, int fault_num);
+
+
+#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/asm/types.h b/arch/tile/include/asm/types.h
new file mode 100644
index 00000000000..b9e79bc580d
--- /dev/null
+++ b/arch/tile/include/asm/types.h
@@ -0,0 +1 @@
+#include <asm-generic/types.h>
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
new file mode 100644
index 00000000000..ed17a80ec0e
--- /dev/null
+++ b/arch/tile/include/asm/uaccess.h
@@ -0,0 +1,580 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_UACCESS_H
+#define _ASM_TILE_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm-generic/uaccess-unaligned.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
+
+#define KERNEL_DS	MAKE_MM_SEG(-1UL)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#ifndef __tilegx__
+/*
+ * We could allow mapping all 16 MB at 0xfc000000, but we set up a
+ * special hack in arch_setup_additional_pages() to auto-create a mapping
+ * for the first 16 KB, and it would seem strange to have different
+ * user-accessible semantics for memory at 0xfc000000 and above 0xfc004000.
+ */
+static inline int is_arch_mappable_range(unsigned long addr,
+					 unsigned long size)
+{
+	return (addr >= MEM_USER_INTRPT &&
+		addr < (MEM_USER_INTRPT + INTRPT_SIZE) &&
+		size <= (MEM_USER_INTRPT + INTRPT_SIZE) - addr);
+}
+#define is_arch_mappable_range is_arch_mappable_range
+#else
+#define is_arch_mappable_range(addr, size) 0
+#endif
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ */
+int __range_ok(unsigned long addr, unsigned long size);
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) ({ \
+	__chk_user_ptr(addr); \
+	likely(__range_ok((unsigned long)(addr), (size)) == 0);	\
+})
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * We return the __get_user_N function results in a structure,
+ * thus in r0 and r1.  If "err" is zero, "val" is the result
+ * of the read; otherwise, "err" is -EFAULT.
+ *
+ * We rarely need 8-byte values on a 32-bit architecture, but
+ * we size the structure to accommodate.  In practice, for the
+ * the smaller reads, we can zero the high word for free, and
+ * the caller will ignore it by virtue of casting anyway.
+ */
+struct __get_user {
+	unsigned long long val;
+	int err;
+};
+
+/*
+ * FIXME: we should express these as inline extended assembler, since
+ * they're fundamentally just a variable dereference and some
+ * supporting exception_table gunk.  Note that (a la i386) we can
+ * extend the copy_to_user and copy_from_user routines to call into
+ * such extended assembler routines, though we will have to use a
+ * different return code in that case (1, 2, or 4, rather than -EFAULT).
+ */
+extern struct __get_user __get_user_1(const void __user *);
+extern struct __get_user __get_user_2(const void __user *);
+extern struct __get_user __get_user_4(const void __user *);
+extern struct __get_user __get_user_8(const void __user *);
+extern int __put_user_1(long, void __user *);
+extern int __put_user_2(long, void __user *);
+extern int __put_user_4(long, void __user *);
+extern int __put_user_8(long long, void __user *);
+
+/* Unimplemented routines to cause linker failures */
+extern struct __get_user __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
+ * Careful: we have to cast the result to the type of the pointer
+ * for sign reasons.
+ */
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ */
+#define __get_user(x, ptr)						\
+({	struct __get_user __ret;					\
+	__typeof__(*(ptr)) const __user *__gu_addr = (ptr);		\
+	__chk_user_ptr(__gu_addr);					\
+	switch (sizeof(*(__gu_addr))) {					\
+	case 1:								\
+		__ret = __get_user_1(__gu_addr);			\
+		break;							\
+	case 2:								\
+		__ret = __get_user_2(__gu_addr);			\
+		break;							\
+	case 4:								\
+		__ret = __get_user_4(__gu_addr);			\
+		break;							\
+	case 8:								\
+		__ret = __get_user_8(__gu_addr);			\
+		break;							\
+	default:							\
+		__ret = __get_user_bad();				\
+		break;							\
+	}								\
+	(x) = (__typeof__(*__gu_addr)) (__typeof__(*__gu_addr - *__gu_addr)) \
+	  __ret.val;			                                \
+	__ret.err;							\
+})
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ *
+ * Implementation note: The "case 8" logic of casting to the type of
+ * the result of subtracting the value from itself is basically a way
+ * of keeping all integer types the same, but casting any pointers to
+ * ptrdiff_t, i.e. also an integer type.  This way there are no
+ * questionable casts seen by the compiler on an ILP32 platform.
+ */
+#define __put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	typeof(*__pu_addr) __pu_val = (x);				\
+	__chk_user_ptr(__pu_addr);					\
+	switch (sizeof(__pu_val)) {					\
+	case 1:								\
+		__pu_err = __put_user_1((long)__pu_val, __pu_addr);	\
+		break;							\
+	case 2:								\
+		__pu_err = __put_user_2((long)__pu_val, __pu_addr);	\
+		break;							\
+	case 4:								\
+		__pu_err = __put_user_4((long)__pu_val, __pu_addr);	\
+		break;							\
+	case 8:								\
+		__pu_err =						\
+		  __put_user_8((__typeof__(__pu_val - __pu_val))__pu_val,\
+			__pu_addr);					\
+		break;							\
+	default:							\
+		__pu_err = __put_user_bad();				\
+		break;							\
+	}								\
+	__pu_err;							\
+})
+
+/*
+ * The versions of get_user and put_user without initial underscores
+ * check the address of their arguments to make sure they are not
+ * in kernel space.
+ */
+#define put_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) __user *__Pu_addr = (ptr);			\
+	access_ok(VERIFY_WRITE, (__Pu_addr), sizeof(*(__Pu_addr))) ?	\
+		__put_user((x), (__Pu_addr)) :				\
+		-EFAULT;						\
+})
+
+#define get_user(x, ptr)						\
+({									\
+	__typeof__(*(ptr)) const __user *__Gu_addr = (ptr);		\
+	access_ok(VERIFY_READ, (__Gu_addr), sizeof(*(__Gu_addr))) ?	\
+		__get_user((x), (__Gu_addr)) :				\
+		((x) = 0, -EFAULT);					\
+})
+
+/**
+ * __copy_to_user() - copy data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * An alternate version - __copy_to_user_inatomic() - is designed
+ * to be called from atomic context, typically bracketed by calls
+ * to pagefault_disable() and pagefault_enable().
+ */
+extern unsigned long __must_check __copy_to_user_inatomic(
+	void __user *to, const void *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_fault();
+	return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+/**
+ * __copy_from_user() - copy data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ *
+ * An alternate version - __copy_from_user_inatomic() - is designed
+ * to be called from atomic context, typically bracketed by calls
+ * to pagefault_disable() and pagefault_enable().  This version
+ * does *NOT* pad with zeros.
+ */
+extern unsigned long __must_check __copy_from_user_inatomic(
+	void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_from_user_zeroing(
+	void *to, const void __user *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+       might_fault();
+       return __copy_from_user_zeroing(to, from, n);
+}
+
+static inline unsigned long __must_check
+_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+#ifdef CONFIG_DEBUG_COPY_FROM_USER
+extern void copy_from_user_overflow(void)
+	__compiletime_warning("copy_from_user() size is not provably correct");
+
+static inline unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+
+	if (likely(sz == -1 || sz >= n))
+		n = _copy_from_user(to, from, n);
+	else
+		copy_from_user_overflow();
+
+	return n;
+}
+#else
+#define copy_from_user _copy_from_user
+#endif
+
+#ifdef __tilegx__
+/**
+ * __copy_in_user() - copy data within user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to user space.  Caller must check
+ * the specified blocks with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+extern unsigned long __copy_in_user_asm(
+	void __user *to, const void __user *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	return __copy_in_user_asm(to, from, n);
+}
+
+static inline unsigned long __must_check
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n) && access_ok(VERIFY_READ, from, n))
+		n = __copy_in_user(to, from, n);
+	return n;
+}
+#endif
+
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+extern long strnlen_user_asm(const char __user *str, long n);
+static inline long __must_check strnlen_user(const char __user *str, long n)
+{
+	might_fault();
+	return strnlen_user_asm(str, n);
+}
+#define strlen_user(str) strnlen_user(str, LONG_MAX)
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+extern long strncpy_from_user_asm(char *dst, const char __user *src, long);
+static inline long __must_check __strncpy_from_user(
+	char *dst, const char __user *src, long count)
+{
+	might_fault();
+	return strncpy_from_user_asm(dst, src, count);
+}
+static inline long __must_check strncpy_from_user(
+	char *dst, const char __user *src, long count)
+{
+	if (access_ok(VERIFY_READ, src, 1))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @mem:   Destination address, in user space.
+ * @len:   Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern unsigned long clear_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __clear_user(
+	void __user *mem, unsigned long len)
+{
+	might_fault();
+	return clear_user_asm(mem, len);
+}
+static inline unsigned long __must_check clear_user(
+	void __user *mem, unsigned long len)
+{
+	if (access_ok(VERIFY_WRITE, mem, len))
+		return __clear_user(mem, len);
+	return len;
+}
+
+/**
+ * flush_user: - Flush a block of memory in user space from cache.
+ * @mem:   Destination address, in user space.
+ * @len:   Number of bytes to flush.
+ *
+ * Returns number of bytes that could not be flushed.
+ * On success, this will be zero.
+ */
+extern unsigned long flush_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __flush_user(
+	void __user *mem, unsigned long len)
+{
+	int retval;
+
+	might_fault();
+	retval = flush_user_asm(mem, len);
+	mb_incoherent();
+	return retval;
+}
+
+static inline unsigned long __must_check flush_user(
+	void __user *mem, unsigned long len)
+{
+	if (access_ok(VERIFY_WRITE, mem, len))
+		return __flush_user(mem, len);
+	return len;
+}
+
+/**
+ * inv_user: - Invalidate a block of memory in user space from cache.
+ * @mem:   Destination address, in user space.
+ * @len:   Number of bytes to invalidate.
+ *
+ * Returns number of bytes that could not be invalidated.
+ * On success, this will be zero.
+ *
+ * Note that on Tile64, the "inv" operation is in fact a
+ * "flush and invalidate", so cache write-backs will occur prior
+ * to the cache being marked invalid.
+ */
+extern unsigned long inv_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __inv_user(
+	void __user *mem, unsigned long len)
+{
+	int retval;
+
+	might_fault();
+	retval = inv_user_asm(mem, len);
+	mb_incoherent();
+	return retval;
+}
+static inline unsigned long __must_check inv_user(
+	void __user *mem, unsigned long len)
+{
+	if (access_ok(VERIFY_WRITE, mem, len))
+		return __inv_user(mem, len);
+	return len;
+}
+
+/**
+ * finv_user: - Flush-inval a block of memory in user space from cache.
+ * @mem:   Destination address, in user space.
+ * @len:   Number of bytes to invalidate.
+ *
+ * Returns number of bytes that could not be flush-invalidated.
+ * On success, this will be zero.
+ */
+extern unsigned long finv_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __finv_user(
+	void __user *mem, unsigned long len)
+{
+	int retval;
+
+	might_fault();
+	retval = finv_user_asm(mem, len);
+	mb_incoherent();
+	return retval;
+}
+static inline unsigned long __must_check finv_user(
+	void __user *mem, unsigned long len)
+{
+	if (access_ok(VERIFY_WRITE, mem, len))
+		return __finv_user(mem, len);
+	return len;
+}
+
+#endif /* _ASM_TILE_UACCESS_H */
diff --git a/arch/tile/include/asm/ucontext.h b/arch/tile/include/asm/ucontext.h
new file mode 100644
index 00000000000..9bc07b9f30f
--- /dev/null
+++ b/arch/tile/include/asm/ucontext.h
@@ -0,0 +1 @@
+#include <asm-generic/ucontext.h>
diff --git a/arch/tile/include/asm/unaligned.h b/arch/tile/include/asm/unaligned.h
new file mode 100644
index 00000000000..137e2de5b10
--- /dev/null
+++ b/arch/tile/include/asm/unaligned.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_UNALIGNED_H
+#define _ASM_TILE_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif /* _ASM_TILE_UNALIGNED_H */
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
new file mode 100644
index 00000000000..f2e3ff48533
--- /dev/null
+++ b/arch/tile/include/asm/unistd.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_TILE_UNISTD_H
+
+#ifndef __LP64__
+/* Use the flavor of this syscall that matches the 32-bit API better. */
+#define __ARCH_WANT_SYNC_FILE_RANGE2
+#endif
+
+/* Use the standard ABI for syscalls. */
+#include <asm-generic/unistd.h>
+
+/* Additional Tilera-specific syscalls. */
+#define __NR_flush_cache	(__NR_arch_specific_syscall + 1)
+__SYSCALL(__NR_flush_cache, sys_flush_cache)
+
+#ifndef __tilegx__
+/* "Fast" syscalls provide atomic support for 32-bit chips. */
+#define __NR_FAST_cmpxchg	-1
+#define __NR_FAST_atomic_update	-2
+#define __NR_FAST_cmpxchg64	-3
+#define __NR_cmpxchg_badaddr	(__NR_arch_specific_syscall + 0)
+__SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
+#endif
+
+#ifdef __KERNEL__
+/* In compat mode, we use sys_llseek() for compat_sys_llseek(). */
+#ifdef CONFIG_COMPAT
+#define __ARCH_WANT_SYS_LLSEEK
+#endif
+#endif
+
+#endif /* _ASM_TILE_UNISTD_H */
diff --git a/arch/tile/include/asm/user.h b/arch/tile/include/asm/user.h
new file mode 100644
index 00000000000..cbc8b4d5a5c
--- /dev/null
+++ b/arch/tile/include/asm/user.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ */
+
+#ifndef _ASM_TILE_USER_H
+#define _ASM_TILE_USER_H
+
+/* This header is for a.out file formats, which TILE does not support. */
+
+#endif /* _ASM_TILE_USER_H */
diff --git a/arch/tile/include/asm/xor.h b/arch/tile/include/asm/xor.h
new file mode 100644
index 00000000000..c82eb12a5b1
--- /dev/null
+++ b/arch/tile/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/tile/include/hv/drv_pcie_rc_intf.h b/arch/tile/include/hv/drv_pcie_rc_intf.h
new file mode 100644
index 00000000000..9bd2243bece
--- /dev/null
+++ b/arch/tile/include/hv/drv_pcie_rc_intf.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drv_pcie_rc_intf.h
+ * Interface definitions for the PCIE Root Complex.
+ */
+
+#ifndef _SYS_HV_DRV_PCIE_RC_INTF_H
+#define _SYS_HV_DRV_PCIE_RC_INTF_H
+
+/** File offset for reading the interrupt base number used for PCIE legacy
+    interrupts and PLX Gen 1 requirement flag */
+#define PCIE_RC_CONFIG_MASK_OFF 0
+
+
+/**
+ * Structure used for obtaining PCIe config information, read from the PCIE
+ * subsystem /ctl file at initialization
+ */
+typedef struct pcie_rc_config
+{
+  int intr;                     /**< interrupt number used for downcall */
+  int plx_gen1;                 /**< flag for PLX Gen 1 configuration */
+} pcie_rc_config_t;
+
+#endif  /* _SYS_HV_DRV_PCIE_RC_INTF_H */
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
new file mode 100644
index 00000000000..59b46dc5399
--- /dev/null
+++ b/arch/tile/include/hv/hypervisor.h
@@ -0,0 +1,2375 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file hypervisor.h
+ * The hypervisor's public API.
+ */
+
+#ifndef _TILE_HV_H
+#define _TILE_HV_H
+
+#include <arch/chip.h>
+
+#include <hv/pagesize.h>
+
+/* Linux builds want unsigned long constants, but assembler wants numbers */
+#ifdef __ASSEMBLER__
+/** One, for assembler */
+#define __HV_SIZE_ONE 1
+#elif !defined(__tile__) && CHIP_VA_WIDTH() > 32
+/** One, for 64-bit on host */
+#define __HV_SIZE_ONE 1ULL
+#else
+/** One, for Linux */
+#define __HV_SIZE_ONE 1UL
+#endif
+
+/** The log2 of the span of a level-1 page table, in bytes.
+ */
+#define HV_LOG2_L1_SPAN 32
+
+/** The span of a level-1 page table, in bytes.
+ */
+#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN)
+
+/** The size of small pages, in bytes. This value should be verified
+ * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ */
+#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL)
+
+/** The size of large pages, in bytes. This value should be verified
+ * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ */
+#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE)
+
+/** The log2 of the granularity at which page tables must be aligned;
+ *  in other words, the CPA for a page table must have this many zero
+ *  bits at the bottom of the address.
+ */
+#define HV_LOG2_PAGE_TABLE_ALIGN 11
+
+/** The granularity at which page tables must be aligned.
+ */
+#define HV_PAGE_TABLE_ALIGN (__HV_SIZE_ONE << HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Normal start of hypervisor glue in client physical memory. */
+#define HV_GLUE_START_CPA 0x10000
+
+/** This much space is reserved at HV_GLUE_START_CPA
+ * for the hypervisor glue. The client program must start at
+ * some address higher than this, and in particular the address of
+ * its text section should be equal to zero modulo HV_PAGE_SIZE_LARGE
+ * so that relative offsets to the HV glue are correct.
+ */
+#define HV_GLUE_RESERVED_SIZE 0x10000
+
+/** Each entry in the hv dispatch array takes this many bytes. */
+#define HV_DISPATCH_ENTRY_SIZE 32
+
+/** Version of the hypervisor interface defined by this file */
+#define _HV_VERSION 11
+
+/* Index into hypervisor interface dispatch code blocks.
+ *
+ * Hypervisor calls are invoked from user space by calling code
+ * at an address HV_BASE_ADDRESS + (index) * HV_DISPATCH_ENTRY_SIZE,
+ * where index is one of these enum values.
+ *
+ * Normally a supervisor is expected to produce a set of symbols
+ * starting at HV_BASE_ADDRESS that obey this convention, but a user
+ * program could call directly through function pointers if desired.
+ *
+ * These numbers are part of the binary API and will not be changed
+ * without updating HV_VERSION, which should be a rare event.
+ */
+
+/** reserved. */
+#define _HV_DISPATCH_RESERVED                     0
+
+/** hv_init  */
+#define HV_DISPATCH_INIT                          1
+
+/** hv_install_context */
+#define HV_DISPATCH_INSTALL_CONTEXT               2
+
+/** hv_sysconf */
+#define HV_DISPATCH_SYSCONF                       3
+
+/** hv_get_rtc */
+#define HV_DISPATCH_GET_RTC                       4
+
+/** hv_set_rtc */
+#define HV_DISPATCH_SET_RTC                       5
+
+/** hv_flush_asid */
+#define HV_DISPATCH_FLUSH_ASID                    6
+
+/** hv_flush_page */
+#define HV_DISPATCH_FLUSH_PAGE                    7
+
+/** hv_flush_pages */
+#define HV_DISPATCH_FLUSH_PAGES                   8
+
+/** hv_restart */
+#define HV_DISPATCH_RESTART                       9
+
+/** hv_halt */
+#define HV_DISPATCH_HALT                          10
+
+/** hv_power_off */
+#define HV_DISPATCH_POWER_OFF                     11
+
+/** hv_inquire_physical */
+#define HV_DISPATCH_INQUIRE_PHYSICAL              12
+
+/** hv_inquire_memory_controller */
+#define HV_DISPATCH_INQUIRE_MEMORY_CONTROLLER     13
+
+/** hv_inquire_virtual */
+#define HV_DISPATCH_INQUIRE_VIRTUAL               14
+
+/** hv_inquire_asid */
+#define HV_DISPATCH_INQUIRE_ASID                  15
+
+/** hv_nanosleep */
+#define HV_DISPATCH_NANOSLEEP                     16
+
+/** hv_console_read_if_ready */
+#define HV_DISPATCH_CONSOLE_READ_IF_READY         17
+
+/** hv_console_write */
+#define HV_DISPATCH_CONSOLE_WRITE                 18
+
+/** hv_downcall_dispatch */
+#define HV_DISPATCH_DOWNCALL_DISPATCH             19
+
+/** hv_inquire_topology */
+#define HV_DISPATCH_INQUIRE_TOPOLOGY              20
+
+/** hv_fs_findfile */
+#define HV_DISPATCH_FS_FINDFILE                   21
+
+/** hv_fs_fstat */
+#define HV_DISPATCH_FS_FSTAT                      22
+
+/** hv_fs_pread */
+#define HV_DISPATCH_FS_PREAD                      23
+
+/** hv_physaddr_read64 */
+#define HV_DISPATCH_PHYSADDR_READ64               24
+
+/** hv_physaddr_write64 */
+#define HV_DISPATCH_PHYSADDR_WRITE64              25
+
+/** hv_get_command_line */
+#define HV_DISPATCH_GET_COMMAND_LINE              26
+
+/** hv_set_caching */
+#define HV_DISPATCH_SET_CACHING                   27
+
+/** hv_bzero_page */
+#define HV_DISPATCH_BZERO_PAGE                    28
+
+/** hv_register_message_state */
+#define HV_DISPATCH_REGISTER_MESSAGE_STATE        29
+
+/** hv_send_message */
+#define HV_DISPATCH_SEND_MESSAGE                  30
+
+/** hv_receive_message */
+#define HV_DISPATCH_RECEIVE_MESSAGE               31
+
+/** hv_inquire_context */
+#define HV_DISPATCH_INQUIRE_CONTEXT               32
+
+/** hv_start_all_tiles */
+#define HV_DISPATCH_START_ALL_TILES               33
+
+/** hv_dev_open */
+#define HV_DISPATCH_DEV_OPEN                      34
+
+/** hv_dev_close */
+#define HV_DISPATCH_DEV_CLOSE                     35
+
+/** hv_dev_pread */
+#define HV_DISPATCH_DEV_PREAD                     36
+
+/** hv_dev_pwrite */
+#define HV_DISPATCH_DEV_PWRITE                    37
+
+/** hv_dev_poll */
+#define HV_DISPATCH_DEV_POLL                      38
+
+/** hv_dev_poll_cancel */
+#define HV_DISPATCH_DEV_POLL_CANCEL               39
+
+/** hv_dev_preada */
+#define HV_DISPATCH_DEV_PREADA                    40
+
+/** hv_dev_pwritea */
+#define HV_DISPATCH_DEV_PWRITEA                   41
+
+/** hv_flush_remote */
+#define HV_DISPATCH_FLUSH_REMOTE                  42
+
+/** hv_console_putc */
+#define HV_DISPATCH_CONSOLE_PUTC                  43
+
+/** hv_inquire_tiles */
+#define HV_DISPATCH_INQUIRE_TILES                 44
+
+/** hv_confstr */
+#define HV_DISPATCH_CONFSTR                       45
+
+/** hv_reexec */
+#define HV_DISPATCH_REEXEC                        46
+
+/** hv_set_command_line */
+#define HV_DISPATCH_SET_COMMAND_LINE              47
+
+#if !CHIP_HAS_IPI()
+
+/** hv_clear_intr */
+#define HV_DISPATCH_CLEAR_INTR                    48
+
+/** hv_enable_intr */
+#define HV_DISPATCH_ENABLE_INTR                   49
+
+/** hv_disable_intr */
+#define HV_DISPATCH_DISABLE_INTR                  50
+
+/** hv_raise_intr */
+#define HV_DISPATCH_RAISE_INTR                    51
+
+/** hv_trigger_ipi */
+#define HV_DISPATCH_TRIGGER_IPI                   52
+
+#endif /* !CHIP_HAS_IPI() */
+
+/** hv_store_mapping */
+#define HV_DISPATCH_STORE_MAPPING                 53
+
+/** hv_inquire_realpa */
+#define HV_DISPATCH_INQUIRE_REALPA                54
+
+/** hv_flush_all */
+#define HV_DISPATCH_FLUSH_ALL                     55
+
+#if CHIP_HAS_IPI()
+/** hv_get_ipi_pte */
+#define HV_DISPATCH_GET_IPI_PTE                   56
+#endif
+
+/** One more than the largest dispatch value */
+#define _HV_DISPATCH_END                          57
+
+
+#ifndef __ASSEMBLER__
+
+#ifdef __KERNEL__
+#include <asm/types.h>
+typedef u32 __hv32;        /**< 32-bit value */
+typedef u64 __hv64;        /**< 64-bit value */
+#else
+#include <stdint.h>
+typedef uint32_t __hv32;   /**< 32-bit value */
+typedef uint64_t __hv64;   /**< 64-bit value */
+#endif
+
+
+/** Hypervisor physical address. */
+typedef __hv64 HV_PhysAddr;
+
+#if CHIP_VA_WIDTH() > 32
+/** Hypervisor virtual address. */
+typedef __hv64 HV_VirtAddr;
+#else
+/** Hypervisor virtual address. */
+typedef __hv32 HV_VirtAddr;
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Hypervisor ASID. */
+typedef unsigned int HV_ASID;
+
+/** Hypervisor tile location for a memory access
+ * ("location overridden target").
+ */
+typedef unsigned int HV_LOTAR;
+
+/** Hypervisor size of a page. */
+typedef unsigned long HV_PageSize;
+
+/** A page table entry.
+ */
+typedef struct
+{
+  __hv64 val;                /**< Value of PTE */
+} HV_PTE;
+
+/** Hypervisor error code. */
+typedef int HV_Errno;
+
+#endif /* !__ASSEMBLER__ */
+
+#define HV_OK           0    /**< No error */
+#define HV_EINVAL      -801  /**< Invalid argument */
+#define HV_ENODEV      -802  /**< No such device */
+#define HV_ENOENT      -803  /**< No such file or directory */
+#define HV_EBADF       -804  /**< Bad file number */
+#define HV_EFAULT      -805  /**< Bad address */
+#define HV_ERECIP      -806  /**< Bad recipients */
+#define HV_E2BIG       -807  /**< Message too big */
+#define HV_ENOTSUP     -808  /**< Service not supported */
+#define HV_EBUSY       -809  /**< Device busy */
+#define HV_ENOSYS      -810  /**< Invalid syscall */
+#define HV_EPERM       -811  /**< No permission */
+#define HV_ENOTREADY   -812  /**< Device not ready */
+#define HV_EIO         -813  /**< I/O error */
+#define HV_ENOMEM      -814  /**< Out of memory */
+
+#define HV_ERR_MAX     -801  /**< Largest HV error code */
+#define HV_ERR_MIN     -814  /**< Smallest HV error code */
+
+#ifndef __ASSEMBLER__
+
+/** Pass HV_VERSION to hv_init to request this version of the interface. */
+typedef enum { HV_VERSION = _HV_VERSION } HV_VersionNumber;
+
+/** Initializes the hypervisor.
+ *
+ * @param interface_version_number The version of the hypervisor interface
+ * that this program expects, typically HV_VERSION.
+ * @param chip_num Architecture number of the chip the client was built for.
+ * @param chip_rev_num Revision number of the chip the client was built for.
+ */
+void hv_init(HV_VersionNumber interface_version_number,
+             int chip_num, int chip_rev_num);
+
+
+/** Queries we can make for hv_sysconf().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+  /** An invalid value; do not use. */
+  _HV_SYSCONF_RESERVED       = 0,
+
+  /** The length of the glue section containing the hv_ procs, in bytes. */
+  HV_SYSCONF_GLUE_SIZE       = 1,
+
+  /** The size of small pages, in bytes. */
+  HV_SYSCONF_PAGE_SIZE_SMALL = 2,
+
+  /** The size of large pages, in bytes. */
+  HV_SYSCONF_PAGE_SIZE_LARGE = 3,
+
+  /** Processor clock speed, in hertz. */
+  HV_SYSCONF_CPU_SPEED       = 4,
+
+  /** Processor temperature, in degrees Kelvin.  The value
+   *  HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees
+   *  Celsius.  If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates
+   *  that the temperature has hit an upper limit and is no longer being
+   *  accurately tracked.
+   */
+  HV_SYSCONF_CPU_TEMP        = 5,
+
+  /** Board temperature, in degrees Kelvin.  The value
+   *  HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees
+   *  Celsius.  If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates
+   *  that the temperature has hit an upper limit and is no longer being
+   *  accurately tracked.
+   */
+  HV_SYSCONF_BOARD_TEMP      = 6
+
+} HV_SysconfQuery;
+
+/** Offset to subtract from returned Kelvin temperature to get degrees
+    Celsius. */
+#define HV_SYSCONF_TEMP_KTOC 273
+
+/** Pseudo-temperature value indicating that the temperature has
+ *  pegged at its upper limit and is no longer accurate; note that this is
+ *  the value after subtracting HV_SYSCONF_TEMP_KTOC. */
+#define HV_SYSCONF_OVERTEMP 999
+
+/** Query a configuration value from the hypervisor.
+ * @param query Which value is requested (HV_SYSCONF_xxx).
+ * @return The requested value, or -1 the requested value is illegal or
+ *         unavailable.
+ */
+long hv_sysconf(HV_SysconfQuery query);
+
+
+/** Queries we can make for hv_confstr().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+  /** An invalid value; do not use. */
+  _HV_CONFSTR_RESERVED        = 0,
+
+  /** Board part number. */
+  HV_CONFSTR_BOARD_PART_NUM   = 1,
+
+  /** Board serial number. */
+  HV_CONFSTR_BOARD_SERIAL_NUM = 2,
+
+  /** Chip serial number. */
+  HV_CONFSTR_CHIP_SERIAL_NUM  = 3,
+
+  /** Board revision level. */
+  HV_CONFSTR_BOARD_REV        = 4,
+
+  /** Hypervisor software version. */
+  HV_CONFSTR_HV_SW_VER        = 5,
+
+  /** The name for this chip model. */
+  HV_CONFSTR_CHIP_MODEL       = 6,
+
+  /** Human-readable board description. */
+  HV_CONFSTR_BOARD_DESC       = 7,
+
+  /** Human-readable description of the hypervisor configuration. */
+  HV_CONFSTR_HV_CONFIG        = 8,
+
+  /** Human-readable version string for the boot image (for instance,
+   *  who built it and when, what configuration file was used). */
+  HV_CONFSTR_HV_CONFIG_VER    = 9,
+
+  /** Mezzanine part number. */
+  HV_CONFSTR_MEZZ_PART_NUM   = 10,
+
+  /** Mezzanine serial number. */
+  HV_CONFSTR_MEZZ_SERIAL_NUM = 11,
+
+  /** Mezzanine revision level. */
+  HV_CONFSTR_MEZZ_REV        = 12,
+
+  /** Human-readable mezzanine description. */
+  HV_CONFSTR_MEZZ_DESC       = 13,
+
+  /** Control path for the onboard network switch. */
+  HV_CONFSTR_SWITCH_CONTROL  = 14,
+
+  /** Chip revision level. */
+  HV_CONFSTR_CHIP_REV        = 15
+
+} HV_ConfstrQuery;
+
+/** Query a configuration string from the hypervisor.
+ *
+ * @param query Identifier for the specific string to be retrieved
+ *        (HV_CONFSTR_xxx).
+ * @param buf Buffer in which to place the string.
+ * @param len Length of the buffer.
+ * @return If query is valid, then the length of the corresponding string,
+ *        including the trailing null; if this is greater than len, the string
+ *        was truncated.  If query is invalid, HV_EINVAL.  If the specified
+ *        buffer is not writable by the client, HV_EFAULT.
+ */
+int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len);
+
+/** Tile coordinate */
+typedef struct
+{
+  /** X coordinate, relative to supervisor's top-left coordinate */
+  int x;
+
+  /** Y coordinate, relative to supervisor's top-left coordinate */
+  int y;
+} HV_Coord;
+
+
+#if CHIP_HAS_IPI()
+
+/** Get the PTE for sending an IPI to a particular tile.
+ *
+ * @param tile Tile which will receive the IPI.
+ * @param pl Indicates which IPI registers: 0 = IPI_0, 1 = IPI_1.
+ * @param pte Filled with resulting PTE.
+ * @result Zero if no error, non-zero for invalid parameters.
+ */
+int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte);
+
+#else /* !CHIP_HAS_IPI() */
+
+/** A set of interrupts. */
+typedef __hv32 HV_IntrMask;
+
+/** The low interrupt numbers are reserved for use by the client in
+ *  delivering IPIs.  Any interrupt numbers higher than this value are
+ *  reserved for use by HV device drivers. */
+#define HV_MAX_IPI_INTERRUPT 7
+
+/** Enable a set of device interrupts.
+ *
+ * @param enab_mask Bitmap of interrupts to enable.
+ */
+void hv_enable_intr(HV_IntrMask enab_mask);
+
+/** Disable a set of device interrupts.
+ *
+ * @param disab_mask Bitmap of interrupts to disable.
+ */
+void hv_disable_intr(HV_IntrMask disab_mask);
+
+/** Clear a set of device interrupts.
+ *
+ * @param clear_mask Bitmap of interrupts to clear.
+ */
+void hv_clear_intr(HV_IntrMask clear_mask);
+
+/** Assert a set of device interrupts.
+ *
+ * @param assert_mask Bitmap of interrupts to clear.
+ */
+void hv_assert_intr(HV_IntrMask assert_mask);
+
+/** Trigger a one-shot interrupt on some tile
+ *
+ * @param tile Which tile to interrupt.
+ * @param interrupt Interrupt number to trigger; must be between 0 and
+ *        HV_MAX_IPI_INTERRUPT.
+ * @return HV_OK on success, or a hypervisor error code.
+ */
+HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt);
+
+#endif /* !CHIP_HAS_IPI() */
+
+/** Store memory mapping in debug memory so that external debugger can read it.
+ * A maximum of 16 entries can be stored.
+ *
+ * @param va VA of memory that is mapped.
+ * @param len Length of mapped memory.
+ * @param pa PA of memory that is mapped.
+ * @return 0 on success, -1 if the maximum number of mappings is exceeded.
+ */
+int hv_store_mapping(HV_VirtAddr va, unsigned int len, HV_PhysAddr pa);
+
+/** Given a client PA and a length, return its real (HV) PA.
+ *
+ * @param cpa Client physical address.
+ * @param len Length of mapped memory.
+ * @return physical address, or -1 if cpa or len is not valid.
+ */
+HV_PhysAddr hv_inquire_realpa(HV_PhysAddr cpa, unsigned int len);
+
+/** RTC return flag for no RTC chip present.
+ */
+#define HV_RTC_NO_CHIP     0x1
+
+/** RTC return flag for low-voltage condition, indicating that battery had
+ * died and time read is unreliable.
+ */
+#define HV_RTC_LOW_VOLTAGE 0x2
+
+/** Date/Time of day */
+typedef struct {
+#if CHIP_WORD_SIZE() > 32
+  __hv64 tm_sec;   /**< Seconds, 0-59 */
+  __hv64 tm_min;   /**< Minutes, 0-59 */
+  __hv64 tm_hour;  /**< Hours, 0-23 */
+  __hv64 tm_mday;  /**< Day of month, 0-30 */
+  __hv64 tm_mon;   /**< Month, 0-11 */
+  __hv64 tm_year;  /**< Years since 1900, 0-199 */
+  __hv64 flags;    /**< Return flags, 0 if no error */
+#else
+  __hv32 tm_sec;   /**< Seconds, 0-59 */
+  __hv32 tm_min;   /**< Minutes, 0-59 */
+  __hv32 tm_hour;  /**< Hours, 0-23 */
+  __hv32 tm_mday;  /**< Day of month, 0-30 */
+  __hv32 tm_mon;   /**< Month, 0-11 */
+  __hv32 tm_year;  /**< Years since 1900, 0-199 */
+  __hv32 flags;    /**< Return flags, 0 if no error */
+#endif
+} HV_RTCTime;
+
+/** Read the current time-of-day clock.
+ * @return HV_RTCTime of current time (GMT).
+ */
+HV_RTCTime hv_get_rtc(void);
+
+
+/** Set the current time-of-day clock.
+ * @param time time to reset time-of-day to (GMT).
+ */
+void hv_set_rtc(HV_RTCTime time);
+
+/** Installs a context, comprising a page table and other attributes.
+ *
+ *  Once this service completes, page_table will be used to translate
+ *  subsequent virtual address references to physical memory.
+ *
+ *  Installing a context does not cause an implicit TLB flush.  Before
+ *  reusing an ASID value for a different address space, the client is
+ *  expected to flush old references from the TLB with hv_flush_asid().
+ *  (Alternately, hv_flush_all() may be used to flush many ASIDs at once.)
+ *  After invalidating a page table entry, changing its attributes, or
+ *  changing its target CPA, the client is expected to flush old references
+ *  from the TLB with hv_flush_page() or hv_flush_pages(). Making a
+ *  previously invalid page valid does not require a flush.
+ *
+ *  Specifying an invalid ASID, or an invalid CPA (client physical address)
+ *  (either as page_table_pointer, or within the referenced table),
+ *  or another page table data item documented as above as illegal may
+ *  lead to client termination; since the validation of the table is
+ *  done as needed, this may happen before the service returns, or at
+ *  some later time, or never, depending upon the client's pattern of
+ *  memory references.  Page table entries which supply translations for
+ *  invalid virtual addresses may result in client termination, or may
+ *  be silently ignored.  "Invalid" in this context means a value which
+ *  was not provided to the client via the appropriate hv_inquire_* routine.
+ *
+ *  To support changing the instruction VAs at the same time as
+ *  installing the new page table, this call explicitly supports
+ *  setting the "lr" register to a different address and then jumping
+ *  directly to the hv_install_context() routine.  In this case, the
+ *  new page table does not need to contain any mapping for the
+ *  hv_install_context address itself.
+ *
+ * @param page_table Root of the page table.
+ * @param access PTE providing info on how to read the page table.  This
+ *   value must be consistent between multiple tiles sharing a page table,
+ *   and must also be consistent with any virtual mappings the client
+ *   may be using to access the page table.
+ * @param asid HV_ASID the page table is to be used for.
+ * @param flags Context flags, denoting attributes or privileges of the
+ *   current context (HV_CTX_xxx).
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid,
+                       __hv32 flags);
+
+#endif /* !__ASSEMBLER__ */
+
+#define HV_CTX_DIRECTIO     0x1   /**< Direct I/O requests are accepted from
+                                       PL0. */
+
+#ifndef __ASSEMBLER__
+
+/** Value returned from hv_inquire_context(). */
+typedef struct
+{
+  /** Physical address of page table */
+  HV_PhysAddr page_table;
+
+  /** PTE which defines access method for top of page table */
+  HV_PTE access;
+
+  /** ASID associated with this page table */
+  HV_ASID asid;
+
+  /** Context flags */
+  __hv32 flags;
+} HV_Context;
+
+/** Retrieve information about the currently installed context.
+ * @return The data passed to the last successful hv_install_context call.
+ */
+HV_Context hv_inquire_context(void);
+
+
+/** Flushes all translations associated with the named address space
+ *  identifier from the TLB and any other hypervisor data structures.
+ *  Translations installed with the "global" bit are not flushed.
+ *
+ *  Specifying an invalid ASID may lead to client termination.  "Invalid"
+ *  in this context means a value which was not provided to the client
+ *  via <tt>hv_inquire_asid()</tt>.
+ *
+ * @param asid HV_ASID whose entries are to be flushed.
+ * @return Zero on success, or a hypervisor error code on failure.
+*/
+int hv_flush_asid(HV_ASID asid);
+
+
+/** Flushes all translations associated with the named virtual address
+ *  and page size from the TLB and other hypervisor data structures. Only
+ *  pages visible to the current ASID are affected; note that this includes
+ *  global pages in addition to pages specific to the current ASID.
+ *
+ *  The supplied VA need not be aligned; it may be anywhere in the
+ *  subject page.
+ *
+ *  Specifying an invalid virtual address may lead to client termination,
+ *  or may silently succeed.  "Invalid" in this context means a value
+ *  which was not provided to the client via hv_inquire_virtual.
+ *
+ * @param address Address of the page to flush.
+ * @param page_size Size of pages to assume.
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_flush_page(HV_VirtAddr address, HV_PageSize page_size);
+
+
+/** Flushes all translations associated with the named virtual address range
+ *  and page size from the TLB and other hypervisor data structures. Only
+ *  pages visible to the current ASID are affected; note that this includes
+ *  global pages in addition to pages specific to the current ASID.
+ *
+ *  The supplied VA need not be aligned; it may be anywhere in the
+ *  subject page.
+ *
+ *  Specifying an invalid virtual address may lead to client termination,
+ *  or may silently succeed.  "Invalid" in this context means a value
+ *  which was not provided to the client via hv_inquire_virtual.
+ *
+ * @param start Address to flush.
+ * @param page_size Size of pages to assume.
+ * @param size The number of bytes to flush. Any page in the range
+ *        [start, start + size) will be flushed from the TLB.
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_flush_pages(HV_VirtAddr start, HV_PageSize page_size,
+                   unsigned long size);
+
+
+/** Flushes all non-global translations (if preserve_global is true),
+ *  or absolutely all translations (if preserve_global is false).
+ *
+ * @param preserve_global Non-zero if we want to preserve "global" mappings.
+ * @return Zero on success, or a hypervisor error code on failure.
+*/
+int hv_flush_all(int preserve_global);
+
+
+/** Restart machine with optional restart command and optional args.
+ * @param cmd Const pointer to command to restart with, or NULL
+ * @param args Const pointer to argument string to restart with, or NULL
+ */
+void hv_restart(HV_VirtAddr cmd, HV_VirtAddr args);
+
+
+/** Halt machine. */
+void hv_halt(void);
+
+
+/** Power off machine. */
+void hv_power_off(void);
+
+
+/** Re-enter virtual-is-physical memory translation mode and restart
+ *  execution at a given address.
+ * @param entry Client physical address at which to begin execution.
+ * @return A hypervisor error code on failure; if the operation is
+ *         successful the call does not return.
+ */
+int hv_reexec(HV_PhysAddr entry);
+
+
+/** Chip topology */
+typedef struct
+{
+  /** Relative coordinates of the querying tile */
+  HV_Coord coord;
+
+  /** Width of the querying supervisor's tile rectangle. */
+  int width;
+
+  /** Height of the querying supervisor's tile rectangle. */
+  int height;
+
+} HV_Topology;
+
+/** Returns information about the tile coordinate system.
+ *
+ * Each supervisor is given a rectangle of tiles it potentially controls.
+ * These tiles are labeled using a relative coordinate system with (0,0) as
+ * the upper left tile regardless of their physical location on the chip.
+ *
+ * This call returns both the size of that rectangle and the position
+ * within that rectangle of the querying tile.
+ *
+ * Not all tiles within that rectangle may be available to the supervisor;
+ * to get the precise set of available tiles, you must also call
+ * hv_inquire_tiles(HV_INQ_TILES_AVAIL, ...).
+ **/
+HV_Topology hv_inquire_topology(void);
+
+/** Sets of tiles we can retrieve with hv_inquire_tiles().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+  /** An invalid value; do not use. */
+  _HV_INQ_TILES_RESERVED       = 0,
+
+  /** All available tiles within the supervisor's tile rectangle. */
+  HV_INQ_TILES_AVAIL           = 1,
+
+  /** The set of tiles used for hash-for-home caching. */
+  HV_INQ_TILES_HFH_CACHE       = 2,
+
+  /** The set of tiles that can be legally used as a LOTAR for a PTE. */
+  HV_INQ_TILES_LOTAR           = 3
+} HV_InqTileSet;
+
+/** Returns specific information about various sets of tiles within the
+ *  supervisor's tile rectangle.
+ *
+ * @param set Which set of tiles to retrieve.
+ * @param cpumask Pointer to a returned bitmask (in row-major order,
+ *        supervisor-relative) of tiles.  The low bit of the first word
+ *        corresponds to the tile at the upper left-hand corner of the
+ *        supervisor's rectangle.  In order for the supervisor to know the
+ *        buffer length to supply, it should first call hv_inquire_topology.
+ * @param length Number of bytes available for the returned bitmask.
+ **/
+HV_Errno hv_inquire_tiles(HV_InqTileSet set, HV_VirtAddr cpumask, int length);
+
+
+/** An identifier for a memory controller. Multiple memory controllers
+ * may be connected to one chip, and this uniquely identifies each one.
+ */
+typedef int HV_MemoryController;
+
+/** A range of physical memory. */
+typedef struct
+{
+  HV_PhysAddr start;   /**< Starting address. */
+  __hv64 size;         /**< Size in bytes. */
+  HV_MemoryController controller;  /**< Which memory controller owns this. */
+} HV_PhysAddrRange;
+
+/** Returns information about a range of physical memory.
+ *
+ * hv_inquire_physical() returns one of the ranges of client
+ * physical addresses which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values.  Ranges
+ * are ordered by increasing start address (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available memory is described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ *
+ * Some clients might not be prepared to deal with more than one
+ * physical address range; they still ought to call this routine and
+ * issue a warning message if they're given more than one range, on the
+ * theory that whoever configured the hypervisor to provide that memory
+ * should know that it's being wasted.
+ */
+HV_PhysAddrRange hv_inquire_physical(int idx);
+
+
+/** Memory controller information. */
+typedef struct
+{
+  HV_Coord coord;   /**< Relative tile coordinates of the port used by a
+                         specified tile to communicate with this controller. */
+  __hv64 speed;     /**< Speed of this controller in bytes per second. */
+} HV_MemoryControllerInfo;
+
+/** Returns information about a particular memory controller.
+ *
+ *  hv_inquire_memory_controller(coord,idx) returns information about a
+ *  particular controller.  Two pieces of information are returned:
+ *  - The relative coordinates of the port on the controller that the specified
+ *    tile would use to contact it.  The relative coordinates may lie
+ *    outside the supervisor's rectangle, i.e. the controller may not
+ *    be attached to a node managed by the querying node's supervisor.
+ *    In particular note that x or y may be negative.
+ *  - The speed of the memory controller.  (This is a not-to-exceed value
+ *    based on the raw hardware data rate, and may not be achievable in
+ *    practice; it is provided to give clients information on the relative
+ *    performance of the available controllers.)
+ *
+ *  Clients should avoid calling this interface with invalid values.
+ *  A client who does may be terminated.
+ * @param coord Tile for which to calculate the relative port position.
+ * @param controller Index of the controller; identical to value returned
+ *        from other routines like hv_inquire_physical.
+ * @return Information about the controller.
+ */
+HV_MemoryControllerInfo hv_inquire_memory_controller(HV_Coord coord,
+                                                     int controller);
+
+
+/** A range of virtual memory. */
+typedef struct
+{
+  HV_VirtAddr start;   /**< Starting address. */
+  __hv64 size;         /**< Size in bytes. */
+} HV_VirtAddrRange;
+
+/** Returns information about a range of virtual memory.
+ *
+ * hv_inquire_virtual() returns one of the ranges of client
+ * virtual addresses which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values.  Ranges
+ * are ordered by increasing start address (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available memory is described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ *
+ * Some clients may well have various virtual addresses hardwired
+ * into themselves; for instance, their instruction stream may
+ * have been compiled expecting to live at a particular address.
+ * Such clients should use this interface to verify they've been
+ * given the virtual address space they expect, and issue a (potentially
+ * fatal) warning message otherwise.
+ *
+ * Note that the returned size is a __hv64, not a __hv32, so it is
+ * possible to express a single range spanning the entire 32-bit
+ * address space.
+ */
+HV_VirtAddrRange hv_inquire_virtual(int idx);
+
+
+/** A range of ASID values. */
+typedef struct
+{
+  HV_ASID start;        /**< First ASID in the range. */
+  unsigned int size;    /**< Number of ASIDs. Zero for an invalid range. */
+} HV_ASIDRange;
+
+/** Returns information about a range of ASIDs.
+ *
+ * hv_inquire_asid() returns one of the ranges of address
+ * space identifiers which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values.  Ranges
+ * are ordered by increasing start value (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available ASIDs are described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ */
+HV_ASIDRange hv_inquire_asid(int idx);
+
+
+/** Waits for at least the specified number of nanoseconds then returns.
+ *
+ * @param nanosecs The number of nanoseconds to sleep.
+ */
+void hv_nanosleep(int nanosecs);
+
+
+/** Reads a character from the console without blocking.
+ *
+ * @return A value from 0-255 indicates the value successfully read.
+ * A negative value means no value was ready.
+ */
+int hv_console_read_if_ready(void);
+
+
+/** Writes a character to the console, blocking if the console is busy.
+ *
+ *  This call cannot fail. If the console is broken for some reason,
+ *  output will simply vanish.
+ * @param byte Character to write.
+ */
+void hv_console_putc(int byte);
+
+
+/** Writes a string to the console, blocking if the console is busy.
+ * @param bytes Pointer to characters to write.
+ * @param len Number of characters to write.
+ * @return Number of characters written, or HV_EFAULT if the buffer is invalid.
+ */
+int hv_console_write(HV_VirtAddr bytes, int len);
+
+
+/** Dispatch the next interrupt from the client downcall mechanism.
+ *
+ *  The hypervisor uses downcalls to notify the client of asynchronous
+ *  events.  Some of these events are hypervisor-created (like incoming
+ *  messages).  Some are regular interrupts which initially occur in
+ *  the hypervisor, and are normally handled directly by the client;
+ *  when these occur in a client's interrupt critical section, they must
+ *  be delivered through the downcall mechanism.
+ *
+ *  A downcall is initially delivered to the client as an INTCTRL_1
+ *  interrupt.  Upon entry to the INTCTRL_1 vector, the client must
+ *  immediately invoke the hv_downcall_dispatch service.  This service
+ *  will not return; instead it will cause one of the client's actual
+ *  downcall-handling interrupt vectors to be entered.  The EX_CONTEXT
+ *  registers in the client will be set so that when the client irets,
+ *  it will return to the code which was interrupted by the INTCTRL_1
+ *  interrupt.
+ *
+ *  Under some circumstances, the firing of INTCTRL_1 can race with
+ *  the lowering of a device interrupt.  In such a case, the
+ *  hv_downcall_dispatch service may issue an iret instruction instead
+ *  of entering one of the client's actual downcall-handling interrupt
+ *  vectors.  This will return execution to the location that was
+ *  interrupted by INTCTRL_1.
+ *
+ *  Any saving of registers should be done by the actual handling
+ *  vectors; no registers should be changed by the INTCTRL_1 handler.
+ *  In particular, the client should not use a jal instruction to invoke
+ *  the hv_downcall_dispatch service, as that would overwrite the client's
+ *  lr register.  Note that the hv_downcall_dispatch service may overwrite
+ *  one or more of the client's system save registers.
+ *
+ *  The client must not modify the INTCTRL_1_STATUS SPR.  The hypervisor
+ *  will set this register to cause a downcall to happen, and will clear
+ *  it when no further downcalls are pending.
+ *
+ *  When a downcall vector is entered, the INTCTRL_1 interrupt will be
+ *  masked.  When the client is done processing a downcall, and is ready
+ *  to accept another, it must unmask this interrupt; if more downcalls
+ *  are pending, this will cause the INTCTRL_1 vector to be reentered.
+ *  Currently the following interrupt vectors can be entered through a
+ *  downcall:
+ *
+ *  INT_MESSAGE_RCV_DWNCL   (hypervisor message available)
+ *  INT_DMATLB_MISS_DWNCL   (DMA TLB miss)
+ *  INT_SNITLB_MISS_DWNCL   (SNI TLB miss)
+ *  INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation)
+ */
+void hv_downcall_dispatch(void);
+
+#endif /* !__ASSEMBLER__ */
+
+/** We use actual interrupt vectors which never occur (they're only there
+ *  to allow setting MPLs for related SPRs) for our downcall vectors.
+ */
+/** Message receive downcall interrupt vector */
+#define INT_MESSAGE_RCV_DWNCL    INT_BOOT_ACCESS
+/** DMA TLB miss downcall interrupt vector */
+#define INT_DMATLB_MISS_DWNCL    INT_DMA_ASID
+/** Static nework processor instruction TLB miss interrupt vector */
+#define INT_SNITLB_MISS_DWNCL    INT_SNI_ASID
+/** DMA TLB access violation downcall interrupt vector */
+#define INT_DMATLB_ACCESS_DWNCL  INT_DMA_CPL
+/** Device interrupt downcall interrupt vector */
+#define INT_DEV_INTR_DWNCL       INT_WORLD_ACCESS
+
+#ifndef __ASSEMBLER__
+
+/** Requests the inode for a specific full pathname.
+ *
+ * Performs a lookup in the hypervisor filesystem for a given filename.
+ * Multiple calls with the same filename will always return the same inode.
+ * If there is no such filename, HV_ENOENT is returned.
+ * A bad filename pointer may result in HV_EFAULT instead.
+ *
+ * @param filename Constant pointer to name of requested file
+ * @return Inode of requested file
+ */
+int hv_fs_findfile(HV_VirtAddr filename);
+
+
+/** Data returned from an fstat request.
+ * Note that this structure should be no more than 40 bytes in size so
+ * that it can always be returned completely in registers.
+ */
+typedef struct
+{
+  int size;             /**< Size of file (or HV_Errno on error) */
+  unsigned int flags;   /**< Flags (see HV_FS_FSTAT_FLAGS) */
+} HV_FS_StatInfo;
+
+/** Bitmask flags for fstat request */
+typedef enum
+{
+  HV_FS_ISDIR    = 0x0001   /**< Is the entry a directory? */
+} HV_FS_FSTAT_FLAGS;
+
+/** Get stat information on a given file inode.
+ *
+ * Return information on the file with the given inode.
+ *
+ * IF the HV_FS_ISDIR bit is set, the "file" is a directory.  Reading
+ * it will return NUL-separated filenames (no directory part) relative
+ * to the path to the inode of the directory "file".  These can be
+ * appended to the path to the directory "file" after a forward slash
+ * to create additional filenames.  Note that it is not required
+ * that all valid paths be decomposable into valid parent directories;
+ * a filesystem may validly have just a few files, none of which have
+ * HV_FS_ISDIR set.  However, if clients may wish to enumerate the
+ * files in the filesystem, it is recommended to include all the
+ * appropriate parent directory "files" to give a consistent view.
+ *
+ * An invalid file inode will cause an HV_EBADF error to be returned.
+ *
+ * @param inode The inode number of the query
+ * @return An HV_FS_StatInfo structure
+ */
+HV_FS_StatInfo hv_fs_fstat(int inode);
+
+
+/** Read data from a specific hypervisor file.
+ * On error, may return HV_EBADF for a bad inode or HV_EFAULT for a bad buf.
+ * Reads near the end of the file will return fewer bytes than requested.
+ * Reads at or beyond the end of a file will return zero.
+ *
+ * @param inode the hypervisor file to read
+ * @param buf the buffer to read data into
+ * @param length the number of bytes of data to read
+ * @param offset the offset into the file to read the data from
+ * @return number of bytes successfully read, or an HV_Errno code
+ */
+int hv_fs_pread(int inode, HV_VirtAddr buf, int length, int offset);
+
+
+/** Read a 64-bit word from the specified physical address.
+ * The address must be 8-byte aligned.
+ * Specifying an invalid physical address will lead to client termination.
+ * @param addr The physical address to read
+ * @param access The PTE describing how to read the memory
+ * @return The 64-bit value read from the given address
+ */
+unsigned long long hv_physaddr_read64(HV_PhysAddr addr, HV_PTE access);
+
+
+/** Write a 64-bit word to the specified physical address.
+ * The address must be 8-byte aligned.
+ * Specifying an invalid physical address will lead to client termination.
+ * @param addr The physical address to write
+ * @param access The PTE that says how to write the memory
+ * @param val The 64-bit value to write to the given address
+ */
+void hv_physaddr_write64(HV_PhysAddr addr, HV_PTE access,
+                         unsigned long long val);
+
+
+/** Get the value of the command-line for the supervisor, if any.
+ * This will not include the filename of the booted supervisor, but may
+ * include configured-in boot arguments or the hv_restart() arguments.
+ * If the buffer is not long enough the hypervisor will NUL the first
+ * character of the buffer but not write any other data.
+ * @param buf The virtual address to write the command-line string to.
+ * @param length The length of buf, in characters.
+ * @return The actual length of the command line, including the trailing NUL
+ *         (may be larger than "length").
+ */
+int hv_get_command_line(HV_VirtAddr buf, int length);
+
+
+/** Set a new value for the command-line for the supervisor, which will
+ *  be returned from subsequent invocations of hv_get_command_line() on
+ *  this tile.
+ * @param buf The virtual address to read the command-line string from.
+ * @param length The length of buf, in characters; must be no more than
+ *        HV_COMMAND_LINE_LEN.
+ * @return Zero if successful, or a hypervisor error code.
+ */
+HV_Errno hv_set_command_line(HV_VirtAddr buf, int length);
+
+/** Maximum size of a command line passed to hv_set_command_line(); note
+ *  that a line returned from hv_get_command_line() could be larger than
+ *  this.*/
+#define HV_COMMAND_LINE_LEN  256
+
+/** Tell the hypervisor how to cache non-priority pages
+ * (its own as well as pages explicitly represented in page tables).
+ * Normally these will be represented as red/black pages, but
+ * when the supervisor starts to allocate "priority" pages in the PTE
+ * the hypervisor will need to start marking those pages as (e.g.) "red"
+ * and non-priority pages as either "black" (if they cache-alias
+ * with the existing priority pages) or "red/black" (if they don't).
+ * The bitmask provides information on which parts of the cache
+ * have been used for pinned pages so far on this tile; if (1 << N)
+ * appears in the bitmask, that indicates that a page has been marked
+ * "priority" whose PFN equals N, mod 8.
+ * @param bitmask A bitmap of priority page set values
+ */
+void hv_set_caching(unsigned int bitmask);
+
+
+/** Zero out a specified number of pages.
+ * The va and size must both be multiples of 4096.
+ * Caches are bypassed and memory is directly set to zero.
+ * This API is implemented only in the magic hypervisor and is intended
+ * to provide a performance boost to the minimal supervisor by
+ * giving it a fast way to zero memory pages when allocating them.
+ * @param va Virtual address where the page has been mapped
+ * @param size Number of bytes (must be a page size multiple)
+ */
+void hv_bzero_page(HV_VirtAddr va, unsigned int size);
+
+
+/** State object for the hypervisor messaging subsystem. */
+typedef struct
+{
+#if CHIP_VA_WIDTH() > 32
+  __hv64 opaque[2]; /**< No user-serviceable parts inside */
+#else
+  __hv32 opaque[2]; /**< No user-serviceable parts inside */
+#endif
+}
+HV_MsgState;
+
+/** Register to receive incoming messages.
+ *
+ *  This routine configures the current tile so that it can receive
+ *  incoming messages.  It must be called before the client can receive
+ *  messages with the hv_receive_message routine, and must be called on
+ *  each tile which will receive messages.
+ *
+ *  msgstate is the virtual address of a state object of type HV_MsgState.
+ *  Once the state is registered, the client must not read or write the
+ *  state object; doing so will cause undefined results.
+ *
+ *  If this routine is called with msgstate set to 0, the client's message
+ *  state will be freed and it will no longer be able to receive messages.
+ *  Note that this may cause the loss of any as-yet-undelivered messages
+ *  for the client.
+ *
+ *  If another client attempts to send a message to a client which has
+ *  not yet called hv_register_message_state, or which has freed its
+ *  message state, the message will not be delivered, as if the client
+ *  had insufficient buffering.
+ *
+ *  This routine returns HV_OK if the registration was successful, and
+ *  HV_EINVAL if the supplied state object is unsuitable.  Note that some
+ *  errors may not be detected during this routine, but might be detected
+ *  during a subsequent message delivery.
+ * @param msgstate State object.
+ **/
+HV_Errno hv_register_message_state(HV_MsgState* msgstate);
+
+/** Possible message recipient states. */
+typedef enum
+{
+  HV_TO_BE_SENT,    /**< Not sent (not attempted, or recipient not ready) */
+  HV_SENT,          /**< Successfully sent */
+  HV_BAD_RECIP      /**< Bad recipient coordinates (permanent error) */
+} HV_Recip_State;
+
+/** Message recipient. */
+typedef struct
+{
+  /** X coordinate, relative to supervisor's top-left coordinate */
+  unsigned int x:11;
+
+  /** Y coordinate, relative to supervisor's top-left coordinate */
+  unsigned int y:11;
+
+  /** Status of this recipient */
+  HV_Recip_State state:10;
+} HV_Recipient;
+
+/** Send a message to a set of recipients.
+ *
+ *  This routine sends a message to a set of recipients.
+ *
+ *  recips is an array of HV_Recipient structures.  Each specifies a tile,
+ *  and a message state; initially, it is expected that the state will
+ *  be set to HV_TO_BE_SENT.  nrecip specifies the number of recipients
+ *  in the recips array.
+ *
+ *  For each recipient whose state is HV_TO_BE_SENT, the hypervisor attempts
+ *  to send that tile the specified message.  In order to successfully
+ *  receive the message, the receiver must be a valid tile to which the
+ *  sender has access, must not be the sending tile itself, and must have
+ *  sufficient free buffer space.  (The hypervisor guarantees that each
+ *  tile which has called hv_register_message_state() will be able to
+ *  buffer one message from every other tile which can legally send to it;
+ *  more space may be provided but is not guaranteed.)  If an invalid tile
+ *  is specified, the recipient's state is set to HV_BAD_RECIP; this is a
+ *  permanent delivery error.  If the message is successfully delivered
+ *  to the recipient's buffer, the recipient's state is set to HV_SENT.
+ *  Otherwise, the recipient's state is unchanged.  Message delivery is
+ *  synchronous; all attempts to send messages are completed before this
+ *  routine returns.
+ *
+ *  If no permanent delivery errors were encountered, the routine returns
+ *  the number of messages successfully sent: that is, the number of
+ *  recipients whose states changed from HV_TO_BE_SENT to HV_SENT during
+ *  this operation.  If any permanent delivery errors were encountered,
+ *  the routine returns HV_ERECIP.  In the event of permanent delivery
+ *  errors, it may be the case that delivery was not attempted to all
+ *  recipients; if any messages were succesfully delivered, however,
+ *  recipients' state values will be updated appropriately.
+ *
+ *  It is explicitly legal to specify a recipient structure whose state
+ *  is not HV_TO_BE_SENT; such a recipient is ignored.  One suggested way
+ *  of using hv_send_message to send a message to multiple tiles is to set
+ *  up a list of recipients, and then call the routine repeatedly with the
+ *  same list, each time accumulating the number of messages successfully
+ *  sent, until all messages are sent, a permanent error is encountered,
+ *  or the desired number of attempts have been made.  When used in this
+ *  way, the routine will deliver each message no more than once to each
+ *  recipient.
+ *
+ *  Note that a message being successfully delivered to the recipient's
+ *  buffer space does not guarantee that it is received by the recipient,
+ *  either immediately or at any time in the future; the recipient might
+ *  never call hv_receive_message, or could register a different state
+ *  buffer, losing the message.
+ *
+ *  Specifiying the same recipient more than once in the recipient list
+ *  is an error, which will not result in an error return but which may
+ *  or may not result in more than one message being delivered to the
+ *  recipient tile.
+ *
+ *  buf and buflen specify the message to be sent.  buf is a virtual address
+ *  which must be currently mapped in the client's page table; if not, the
+ *  routine returns HV_EFAULT.  buflen must be greater than zero and less
+ *  than or equal to HV_MAX_MESSAGE_SIZE, and nrecip must be less than the
+ *  number of tiles to which the sender has access; if not, the routine
+ *  returns HV_EINVAL.
+ * @param recips List of recipients.
+ * @param nrecip Number of recipients.
+ * @param buf Address of message data.
+ * @param buflen Length of message data.
+ **/
+int hv_send_message(HV_Recipient *recips, int nrecip,
+                    HV_VirtAddr buf, int buflen);
+
+/** Maximum hypervisor message size, in bytes */
+#define HV_MAX_MESSAGE_SIZE 28
+
+
+/** Return value from hv_receive_message() */
+typedef struct
+{
+  int msglen;     /**< Message length in bytes, or an error code */
+  __hv32 source;  /**< Code identifying message sender (HV_MSG_xxx) */
+} HV_RcvMsgInfo;
+
+#define HV_MSG_TILE 0x0         /**< Message source is another tile */
+#define HV_MSG_INTR 0x1         /**< Message source is a driver interrupt */
+
+/** Receive a message.
+ *
+ * This routine retrieves a message from the client's incoming message
+ * buffer.
+ *
+ * Multiple messages sent from a particular sending tile to a particular
+ * receiving tile are received in the order that they were sent; however,
+ * no ordering is guaranteed between messages sent by different tiles.
+ *
+ * Whenever the a client's message buffer is empty, the first message
+ * subsequently received will cause the client's MESSAGE_RCV_DWNCL
+ * interrupt vector to be invoked through the interrupt downcall mechanism
+ * (see the description of the hv_downcall_dispatch() routine for details
+ * on downcalls).
+ *
+ * Another message-available downcall will not occur until a call to
+ * this routine is made when the message buffer is empty, and a message
+ * subsequently arrives.  Note that such a downcall could occur while
+ * this routine is executing.  If the calling code does not wish this
+ * to happen, it is recommended that this routine be called with the
+ * INTCTRL_1 interrupt masked, or inside an interrupt critical section.
+ *
+ * msgstate is the value previously passed to hv_register_message_state().
+ * buf is the virtual address of the buffer into which the message will
+ * be written; buflen is the length of the buffer.
+ *
+ * This routine returns an HV_RcvMsgInfo structure.  The msglen member
+ * of that structure is the length of the message received, zero if no
+ * message is available, or HV_E2BIG if the message is too large for the
+ * specified buffer.  If the message is too large, it is not consumed,
+ * and may be retrieved by a subsequent call to this routine specifying
+ * a sufficiently large buffer.  A buffer which is HV_MAX_MESSAGE_SIZE
+ * bytes long is guaranteed to be able to receive any possible message.
+ *
+ * The source member of the HV_RcvMsgInfo structure describes the sender
+ * of the message.  For messages sent by another client tile via an
+ * hv_send_message() call, this value is HV_MSG_TILE; for messages sent
+ * as a result of a device interrupt, this value is HV_MSG_INTR.
+ */
+
+HV_RcvMsgInfo hv_receive_message(HV_MsgState msgstate, HV_VirtAddr buf,
+                                 int buflen);
+
+
+/** Start remaining tiles owned by this supervisor.  Initially, only one tile
+ *  executes the client program; after it calls this service, the other tiles
+ *  are started.  This allows the initial tile to do one-time configuration
+ *  of shared data structures without having to lock them against simultaneous
+ *  access.
+ */
+void hv_start_all_tiles(void);
+
+
+/** Open a hypervisor device.
+ *
+ *  This service initializes an I/O device and its hypervisor driver software,
+ *  and makes it available for use.  The open operation is per-device per-chip;
+ *  once it has been performed, the device handle returned may be used in other
+ *  device services calls made by any tile.
+ *
+ * @param name Name of the device.  A base device name is just a text string
+ *        (say, "pcie").  If there is more than one instance of a device, the
+ *        base name is followed by a slash and a device number (say, "pcie/0").
+ *        Some devices may support further structure beneath those components;
+ *        most notably, devices which require control operations do so by
+ *        supporting reads and/or writes to a control device whose name
+ *        includes a trailing "/ctl" (say, "pcie/0/ctl").
+ * @param flags Flags (HV_DEV_xxx).
+ * @return A positive integer device handle, or a negative error code.
+ */
+int hv_dev_open(HV_VirtAddr name, __hv32 flags);
+
+
+/** Close a hypervisor device.
+ *
+ *  This service uninitializes an I/O device and its hypervisor driver
+ *  software, and makes it unavailable for use.  The close operation is
+ *  per-device per-chip; once it has been performed, the device is no longer
+ *  available.  Normally there is no need to ever call the close service.
+ *
+ * @param devhdl Device handle of the device to be closed.
+ * @return Zero if the close is successful, otherwise, a negative error code.
+ */
+int hv_dev_close(int devhdl);
+
+
+/** Read data from a hypervisor device synchronously.
+ *
+ *  This service transfers data from a hypervisor device to a memory buffer.
+ *  When the service returns, the data has been written from the memory buffer,
+ *  and the buffer will not be further modified by the driver.
+ *
+ *  No ordering is guaranteed between requests issued from different tiles.
+ *
+ *  Devices may choose to support both the synchronous and asynchronous read
+ *  operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param va Virtual address of the target data buffer.  This buffer must
+ *        be mapped in the currently installed page table; if not, HV_EFAULT
+ *        may be returned.
+ * @param len Number of bytes to be transferred.
+ * @param offset Driver-dependent offset.  For a random-access device, this is
+ *        often a byte offset from the beginning of the device; in other cases,
+ *        like on a control device, it may have a different meaning.
+ * @return A non-negative value if the read was at least partially successful;
+ *         otherwise, a negative error code.  The precise interpretation of
+ *         the return value is driver-dependent, but many drivers will return
+ *         the number of bytes successfully transferred.
+ */
+int hv_dev_pread(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len,
+                 __hv64 offset);
+
+#define HV_DEV_NB_EMPTY     0x1   /**< Don't block when no bytes of data can
+                                       be transferred. */
+#define HV_DEV_NB_PARTIAL   0x2   /**< Don't block when some bytes, but not all
+                                       of the requested bytes, can be
+                                       transferred. */
+#define HV_DEV_NOCACHE      0x4   /**< The caller warrants that none of the
+                                       cache lines which might contain data
+                                       from the requested buffer are valid.
+                                       Useful with asynchronous operations
+                                       only. */
+
+#define HV_DEV_ALLFLAGS     (HV_DEV_NB_EMPTY | HV_DEV_NB_PARTIAL | \
+                             HV_DEV_NOCACHE)   /**< All HV_DEV_xxx flags */
+
+/** Write data to a hypervisor device synchronously.
+ *
+ *  This service transfers data from a memory buffer to a hypervisor device.
+ *  When the service returns, the data has been read from the memory buffer,
+ *  and the buffer may be overwritten by the client; the data may not
+ *  necessarily have been conveyed to the actual hardware I/O interface.
+ *
+ *  No ordering is guaranteed between requests issued from different tiles.
+ *
+ *  Devices may choose to support both the synchronous and asynchronous write
+ *  operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be written to.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param va Virtual address of the source data buffer.  This buffer must
+ *        be mapped in the currently installed page table; if not, HV_EFAULT
+ *        may be returned.
+ * @param len Number of bytes to be transferred.
+ * @param offset Driver-dependent offset.  For a random-access device, this is
+ *        often a byte offset from the beginning of the device; in other cases,
+ *        like on a control device, it may have a different meaning.
+ * @return A non-negative value if the write was at least partially successful;
+ *         otherwise, a negative error code.  The precise interpretation of
+ *         the return value is driver-dependent, but many drivers will return
+ *         the number of bytes successfully transferred.
+ */
+int hv_dev_pwrite(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len,
+                  __hv64 offset);
+
+
+/** Interrupt arguments, used in the asynchronous I/O interfaces. */
+#if CHIP_VA_WIDTH() > 32
+typedef __hv64 HV_IntArg;
+#else
+typedef __hv32 HV_IntArg;
+#endif
+
+/** Interrupt messages are delivered via the mechanism as normal messages,
+ *  but have a message source of HV_DEV_INTR.  The message is formatted
+ *  as an HV_IntrMsg structure.
+ */
+
+typedef struct
+{
+  HV_IntArg intarg;  /**< Interrupt argument, passed to the poll/preada/pwritea
+                          services */
+  HV_IntArg intdata; /**< Interrupt-specific interrupt data */
+} HV_IntrMsg;
+
+/** Request an interrupt message when a device condition is satisfied.
+ *
+ *  This service requests that an interrupt message be delivered to the
+ *  requesting tile when a device becomes readable or writable, or when any
+ *  data queued to the device via previous write operations from this tile
+ *  has been actually sent out on the hardware I/O interface.  Devices may
+ *  choose to support any, all, or none of the available conditions.
+ *
+ *  If multiple conditions are specified, only one message will be
+ *  delivered.  If the event mask delivered to that interrupt handler
+ *  indicates that some of the conditions have not yet occurred, the
+ *  client must issue another poll() call if it wishes to wait for those
+ *  conditions.
+ *
+ *  Only one poll may be outstanding per device handle per tile.  If more than
+ *  one tile is polling on the same device and condition, they will all be
+ *  notified when it happens.  Because of this, clients may not assume that
+ *  the condition signaled is necessarily still true when they request a
+ *  subsequent service; for instance, the readable data which caused the
+ *  poll call to interrupt may have been read by another tile in the interim.
+ *
+ *  The notification interrupt message could come directly, or via the
+ *  downcall (intctrl1) method, depending on what the tile is doing
+ *  when the condition is satisfied.  Note that it is possible for the
+ *  requested interrupt to be delivered after this service is called but
+ *  before it returns.
+ *
+ * @param devhdl Device handle of the device to be polled.
+ * @param events Flags denoting the events which will cause the interrupt to
+ *        be delivered (HV_DEVPOLL_xxx).
+ * @param intarg Value which will be delivered as the intarg member of the
+ *        eventual interrupt message; the intdata member will be set to a
+ *        mask of HV_DEVPOLL_xxx values indicating which conditions have been
+ *        satisifed.
+ * @return Zero if the interrupt was successfully scheduled; otherwise, a
+ *         negative error code.
+ */
+int hv_dev_poll(int devhdl, __hv32 events, HV_IntArg intarg);
+
+#define HV_DEVPOLL_READ     0x1   /**< Test device for readability */
+#define HV_DEVPOLL_WRITE    0x2   /**< Test device for writability */
+#define HV_DEVPOLL_FLUSH    0x4   /**< Test device for output drained */
+
+
+/** Cancel a request for an interrupt when a device event occurs.
+ *
+ *  This service requests that no interrupt be delivered when the events
+ *  noted in the last-issued poll() call happen.  Once this service returns,
+ *  the interrupt has been canceled; however, it is possible for the interrupt
+ *  to be delivered after this service is called but before it returns.
+ *
+ * @param devhdl Device handle of the device on which to cancel polling.
+ * @return Zero if the poll was successfully canceled; otherwise, a negative
+ *         error code.
+ */
+int hv_dev_poll_cancel(int devhdl);
+
+
+/** Scatter-gather list for preada/pwritea calls. */
+typedef struct
+#if CHIP_VA_WIDTH() <= 32
+__attribute__ ((packed, aligned(4)))
+#endif
+{
+  HV_PhysAddr pa;  /**< Client physical address of the buffer segment. */
+  HV_PTE pte;      /**< Page table entry describing the caching and location
+                        override characteristics of the buffer segment.  Some
+                        drivers ignore this element and will require that
+                        the NOCACHE flag be set on their requests. */
+  __hv32 len;      /**< Length of the buffer segment. */
+} HV_SGL;
+
+#define HV_SGL_MAXLEN 16  /**< Maximum number of entries in a scatter-gather
+                               list */
+
+/** Read data from a hypervisor device asynchronously.
+ *
+ *  This service transfers data from a hypervisor device to a memory buffer.
+ *  When the service returns, the read has been scheduled.  When the read
+ *  completes, an interrupt message will be delivered, and the buffer will
+ *  not be further modified by the driver.
+ *
+ *  The number of possible outstanding asynchronous requests is defined by
+ *  each driver, but it is recommended that it be at least two requests
+ *  per tile per device.
+ *
+ *  No ordering is guaranteed between synchronous and asynchronous requests,
+ *  even those issued on the same tile.
+ *
+ *  The completion interrupt message could come directly, or via the downcall
+ *  (intctrl1) method, depending on what the tile is doing when the read
+ *  completes.  Interrupts do not coalesce; one is delivered for each
+ *  asynchronous I/O request.  Note that it is possible for the requested
+ *  interrupt to be delivered after this service is called but before it
+ *  returns.
+ *
+ *  Devices may choose to support both the synchronous and asynchronous read
+ *  operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param sgl_len Number of elements in the scatter-gather list.
+ * @param sgl Scatter-gather list describing the memory to which data will be
+ *        written.
+ * @param offset Driver-dependent offset.  For a random-access device, this is
+ *        often a byte offset from the beginning of the device; in other cases,
+ *        like on a control device, it may have a different meaning.
+ * @param intarg Value which will be delivered as the intarg member of the
+ *        eventual interrupt message; the intdata member will be set to the
+ *        normal return value from the read request.
+ * @return Zero if the read was successfully scheduled; otherwise, a negative
+ *         error code.  Note that some drivers may choose to pre-validate
+ *         their arguments, and may thus detect certain device error
+ *         conditions at this time rather than when the completion notification
+ *         occurs, but this is not required.
+ */
+int hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len,
+                  HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg);
+
+
+/** Write data to a hypervisor device asynchronously.
+ *
+ *  This service transfers data from a memory buffer to a hypervisor
+ *  device.  When the service returns, the write has been scheduled.
+ *  When the write completes, an interrupt message will be delivered,
+ *  and the buffer may be overwritten by the client; the data may not
+ *  necessarily have been conveyed to the actual hardware I/O interface.
+ *
+ *  The number of possible outstanding asynchronous requests is defined by
+ *  each driver, but it is recommended that it be at least two requests
+ *  per tile per device.
+ *
+ *  No ordering is guaranteed between synchronous and asynchronous requests,
+ *  even those issued on the same tile.
+ *
+ *  The completion interrupt message could come directly, or via the downcall
+ *  (intctrl1) method, depending on what the tile is doing when the read
+ *  completes.  Interrupts do not coalesce; one is delivered for each
+ *  asynchronous I/O request.  Note that it is possible for the requested
+ *  interrupt to be delivered after this service is called but before it
+ *  returns.
+ *
+ *  Devices may choose to support both the synchronous and asynchronous write
+ *  operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param sgl_len Number of elements in the scatter-gather list.
+ * @param sgl Scatter-gather list describing the memory from which data will be
+ *        read.
+ * @param offset Driver-dependent offset.  For a random-access device, this is
+ *        often a byte offset from the beginning of the device; in other cases,
+ *        like on a control device, it may have a different meaning.
+ * @param intarg Value which will be delivered as the intarg member of the
+ *        eventual interrupt message; the intdata member will be set to the
+ *        normal return value from the write request.
+ * @return Zero if the write was successfully scheduled; otherwise, a negative
+ *         error code.  Note that some drivers may choose to pre-validate
+ *         their arguments, and may thus detect certain device error
+ *         conditions at this time rather than when the completion notification
+ *         occurs, but this is not required.
+ */
+int hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len,
+                   HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg);
+
+
+/** Define a pair of tile and ASID to identify a user process context. */
+typedef struct
+{
+  /** X coordinate, relative to supervisor's top-left coordinate */
+  unsigned int x:11;
+
+  /** Y coordinate, relative to supervisor's top-left coordinate */
+  unsigned int y:11;
+
+  /** ASID of the process on this x,y tile */
+  HV_ASID asid:10;
+} HV_Remote_ASID;
+
+/** Flush cache and/or TLB state on remote tiles.
+ *
+ * @param cache_pa Client physical address to flush from cache (ignored if
+ *        the length encoded in cache_control is zero, or if
+ *        HV_FLUSH_EVICT_L2 is set, or if cache_cpumask is NULL).
+ * @param cache_control This argument allows you to specify a length of
+ *        physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN).
+ *        You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache.
+ *        You can "or" in HV_FLUSH_EVICT_LI1 to flush the whole LII cache.
+ *        HV_FLUSH_ALL flushes all caches.
+ * @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of
+ *        tile indices to perform cache flush on.  The low bit of the first
+ *        word corresponds to the tile at the upper left-hand corner of the
+ *        supervisor's rectangle.  If passed as a NULL pointer, equivalent
+ *        to an empty bitmask.  On chips which support hash-for-home caching,
+ *        if passed as -1, equivalent to a mask containing tiles which could
+ *        be doing hash-for-home caching.
+ * @param tlb_va Virtual address to flush from TLB (ignored if
+ *        tlb_length is zero or tlb_cpumask is NULL).
+ * @param tlb_length Number of bytes of data to flush from the TLB.
+ * @param tlb_pgsize Page size to use for TLB flushes.
+ *        tlb_va and tlb_length need not be aligned to this size.
+ * @param tlb_cpumask Bitmask for tlb flush, like cache_cpumask.
+ *        If passed as a NULL pointer, equivalent to an empty bitmask.
+ * @param asids Pointer to an HV_Remote_ASID array of tile/ASID pairs to flush.
+ * @param asidcount Number of HV_Remote_ASID entries in asids[].
+ * @return Zero for success, or else HV_EINVAL or HV_EFAULT for errors that
+ *        are detected while parsing the arguments.
+ */
+int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control,
+                    unsigned long* cache_cpumask,
+                    HV_VirtAddr tlb_va, unsigned long tlb_length,
+                    unsigned long tlb_pgsize, unsigned long* tlb_cpumask,
+                    HV_Remote_ASID* asids, int asidcount);
+
+/** Include in cache_control to ensure a flush of the entire L2. */
+#define HV_FLUSH_EVICT_L2 (1UL << 31)
+
+/** Include in cache_control to ensure a flush of the entire L1I. */
+#define HV_FLUSH_EVICT_L1I (1UL << 30)
+
+/** Maximum legal size to use for the "length" component of cache_control. */
+#define HV_FLUSH_MAX_CACHE_LEN ((1UL << 30) - 1)
+
+/** Use for cache_control to ensure a flush of all caches. */
+#define HV_FLUSH_ALL -1UL
+
+#else   /* __ASSEMBLER__ */
+
+/** Include in cache_control to ensure a flush of the entire L2. */
+#define HV_FLUSH_EVICT_L2 (1 << 31)
+
+/** Include in cache_control to ensure a flush of the entire L1I. */
+#define HV_FLUSH_EVICT_L1I (1 << 30)
+
+/** Maximum legal size to use for the "length" component of cache_control. */
+#define HV_FLUSH_MAX_CACHE_LEN ((1 << 30) - 1)
+
+/** Use for cache_control to ensure a flush of all caches. */
+#define HV_FLUSH_ALL -1
+
+#endif  /* __ASSEMBLER__ */
+
+#ifndef __ASSEMBLER__
+
+/** Return a 64-bit value corresponding to the PTE if needed */
+#define hv_pte_val(pte) ((pte).val)
+
+/** Cast a 64-bit value to an HV_PTE */
+#define hv_pte(val) ((HV_PTE) { val })
+
+#endif  /* !__ASSEMBLER__ */
+
+
+/** Bits in the size of an HV_PTE */
+#define HV_LOG2_PTE_SIZE 3
+
+/** Size of an HV_PTE */
+#define HV_PTE_SIZE (1 << HV_LOG2_PTE_SIZE)
+
+
+/* Bits in HV_PTE's low word. */
+#define HV_PTE_INDEX_PRESENT          0  /**< PTE is valid */
+#define HV_PTE_INDEX_MIGRATING        1  /**< Page is migrating */
+#define HV_PTE_INDEX_CLIENT0          2  /**< Page client state 0 */
+#define HV_PTE_INDEX_CLIENT1          3  /**< Page client state 1 */
+#define HV_PTE_INDEX_NC               4  /**< L1$/L2$ incoherent with L3$ */
+#define HV_PTE_INDEX_NO_ALLOC_L1      5  /**< Page is uncached in local L1$ */
+#define HV_PTE_INDEX_NO_ALLOC_L2      6  /**< Page is uncached in local L2$ */
+#define HV_PTE_INDEX_CACHED_PRIORITY  7  /**< Page is priority cached */
+#define HV_PTE_INDEX_PAGE             8  /**< PTE describes a page */
+#define HV_PTE_INDEX_GLOBAL           9  /**< Page is global */
+#define HV_PTE_INDEX_USER            10  /**< Page is user-accessible */
+#define HV_PTE_INDEX_ACCESSED        11  /**< Page has been accessed */
+#define HV_PTE_INDEX_DIRTY           12  /**< Page has been written */
+                                         /*   Bits 13-15 are reserved for
+                                              future use. */
+#define HV_PTE_INDEX_MODE            16  /**< Page mode; see HV_PTE_MODE_xxx */
+#define HV_PTE_MODE_BITS              3  /**< Number of bits in mode */
+                                         /*   Bit 19 is reserved for
+                                              future use. */
+#define HV_PTE_INDEX_LOTAR           20  /**< Page's LOTAR; must be high bits
+                                              of word */
+#define HV_PTE_LOTAR_BITS            12  /**< Number of bits in a LOTAR */
+
+/* Bits in HV_PTE's high word. */
+#define HV_PTE_INDEX_READABLE        32  /**< Page is readable */
+#define HV_PTE_INDEX_WRITABLE        33  /**< Page is writable */
+#define HV_PTE_INDEX_EXECUTABLE      34  /**< Page is executable */
+#define HV_PTE_INDEX_PTFN            35  /**< Page's PTFN; must be high bits
+                                              of word */
+#define HV_PTE_PTFN_BITS             29  /**< Number of bits in a PTFN */
+
+/** Position of the PFN field within the PTE (subset of the PTFN). */
+#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \
+                                               HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Length of the PFN field within the PTE (subset of the PTFN). */
+#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \
+                               (HV_LOG2_PAGE_SIZE_SMALL - \
+                                HV_LOG2_PAGE_TABLE_ALIGN))
+
+/*
+ * Legal values for the PTE's mode field
+ */
+/** Data is not resident in any caches; loads and stores access memory
+ *  directly.
+ */
+#define HV_PTE_MODE_UNCACHED          1
+
+/** Data is resident in the tile's local L1 and/or L2 caches; if a load
+ *  or store misses there, it goes to memory.
+ *
+ *  The copy in the local L1$/L2$ is not invalidated when the copy in
+ *  memory is changed.
+ */
+#define HV_PTE_MODE_CACHE_NO_L3       2
+
+/** Data is resident in the tile's local L1 and/or L2 caches.  If a load
+ *  or store misses there, it goes to an L3 cache in a designated tile;
+ *  if it misses there, it goes to memory.
+ *
+ *  If the NC bit is not set, the copy in the local L1$/L2$ is invalidated
+ *  when the copy in the remote L3$ is changed.  Otherwise, such
+ *  invalidation will not occur.
+ *
+ *  Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support
+ *  invalidation from an L3$ to another tile's L1$/L2$.  If the NC bit is
+ *  clear on such a chip, no copy is kept in the local L1$/L2$ in this mode.
+ */
+#define HV_PTE_MODE_CACHE_TILE_L3     3
+
+/** Data is resident in the tile's local L1 and/or L2 caches.  If a load
+ *  or store misses there, it goes to an L3 cache in one of a set of
+ *  designated tiles; if it misses there, it goes to memory.  Which tile
+ *  is chosen from the set depends upon a hash function applied to the
+ *  physical address.  This mode is not supported on chips for which
+ *  CHIP_HAS_CBOX_HOME_MAP() is 0.
+ *
+ *  If the NC bit is not set, the copy in the local L1$/L2$ is invalidated
+ *  when the copy in the remote L3$ is changed.  Otherwise, such
+ *  invalidation will not occur.
+ *
+ *  Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support
+ *  invalidation from an L3$ to another tile's L1$/L2$.  If the NC bit is
+ *  clear on such a chip, no copy is kept in the local L1$/L2$ in this mode.
+ */
+#define HV_PTE_MODE_CACHE_HASH_L3     4
+
+/** Data is not resident in memory; accesses are instead made to an I/O
+ *  device, whose tile coordinates are given by the PTE's LOTAR field.
+ *  This mode is only supported on chips for which CHIP_HAS_MMIO() is 1.
+ *  The EXECUTABLE bit may not be set in an MMIO PTE.
+ */
+#define HV_PTE_MODE_MMIO              5
+
+
+/* C wants 1ULL so it is typed as __hv64, but the assembler needs just numbers.
+ * The assembler can't handle shifts greater than 31, but treats them
+ * as shifts mod 32, so assembler code must be aware of which word
+ * the bit belongs in when using these macros.
+ */
+#ifdef __ASSEMBLER__
+#define __HV_PTE_ONE 1        /**< One, for assembler */
+#else
+#define __HV_PTE_ONE 1ULL     /**< One, for C */
+#endif
+
+/** Is this PTE present?
+ *
+ * If this bit is set, this PTE represents a valid translation or level-2
+ * page table pointer.  Otherwise, the page table does not contain a
+ * translation for the subject virtual pages.
+ *
+ * If this bit is not set, the other bits in the PTE are not
+ * interpreted by the hypervisor, and may contain any value.
+ */
+#define HV_PTE_PRESENT               (__HV_PTE_ONE << HV_PTE_INDEX_PRESENT)
+
+/** Does this PTE map a page?
+ *
+ * If this bit is set in the level-1 page table, the entry should be
+ * interpreted as a level-2 page table entry mapping a large page.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * In a level-2 page table, this bit is ignored and must be zero.
+ */
+#define HV_PTE_PAGE                  (__HV_PTE_ONE << HV_PTE_INDEX_PAGE)
+
+/** Is this a global (non-ASID) mapping?
+ *
+ * If this bit is set, the translations established by this PTE will
+ * not be flushed from the TLB by the hv_flush_asid() service; they
+ * will be flushed by the hv_flush_page() or hv_flush_pages() services.
+ *
+ * Setting this bit for translations which are identical in all page
+ * tables (for instance, code and data belonging to a client OS) can
+ * be very beneficial, as it will reduce the number of TLB misses.
+ * Note that, while it is not an error which will be detected by the
+ * hypervisor, it is an extremely bad idea to set this bit for
+ * translations which are _not_ identical in all page tables.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_GLOBAL                (__HV_PTE_ONE << HV_PTE_INDEX_GLOBAL)
+
+/** Is this mapping accessible to users?
+ *
+ * If this bit is set, code running at any PL will be permitted to
+ * access the virtual addresses mapped by this PTE.  Otherwise, only
+ * code running at PL 1 or above will be allowed to do so.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_USER                  (__HV_PTE_ONE << HV_PTE_INDEX_USER)
+
+/** Has this mapping been accessed?
+ *
+ * This bit is set by the hypervisor when the memory described by the
+ * translation is accessed for the first time.  It is never cleared by
+ * the hypervisor, but may be cleared by the client.  After the bit
+ * has been cleared, subsequent references are not guaranteed to set
+ * it again until the translation has been flushed from the TLB.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_ACCESSED              (__HV_PTE_ONE << HV_PTE_INDEX_ACCESSED)
+
+/** Is this mapping dirty?
+ *
+ * This bit is set by the hypervisor when the memory described by the
+ * translation is written for the first time.  It is never cleared by
+ * the hypervisor, but may be cleared by the client.  After the bit
+ * has been cleared, subsequent references are not guaranteed to set
+ * it again until the translation has been flushed from the TLB.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_DIRTY                 (__HV_PTE_ONE << HV_PTE_INDEX_DIRTY)
+
+/** Migrating bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.  The name is indicative of the suggested use by the client
+ * to tag pages whose L3 cache is being migrated from one cpu to another.
+ */
+#define HV_PTE_MIGRATING             (__HV_PTE_ONE << HV_PTE_INDEX_MIGRATING)
+
+/** Client-private bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.
+ */
+#define HV_PTE_CLIENT0               (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT0)
+
+/** Client-private bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.
+ */
+#define HV_PTE_CLIENT1               (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1)
+
+/** Non-coherent (NC) bit in PTE.
+ *
+ * If this bit is set, the mapping that is set up will be non-coherent
+ * (also known as non-inclusive).  This means that changes to the L3
+ * cache will not cause a local copy to be invalidated.  It is generally
+ * recommended only for read-only mappings.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit determines how the
+ * level-2 page table is accessed.
+ */
+#define HV_PTE_NC                    (__HV_PTE_ONE << HV_PTE_INDEX_NC)
+
+/** Is this page prevented from filling the L1$?
+ *
+ * If this bit is set, the page described by the PTE will not be cached
+ * the local cpu's L1 cache.
+ *
+ * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip,
+ * it is illegal to use this attribute, and may cause client termination.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit
+ * determines how the level-2 page table is accessed.
+ */
+#define HV_PTE_NO_ALLOC_L1           (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L1)
+
+/** Is this page prevented from filling the L2$?
+ *
+ * If this bit is set, the page described by the PTE will not be cached
+ * the local cpu's L2 cache.
+ *
+ * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip,
+ * it is illegal to use this attribute, and may cause client termination.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit determines how the
+ * level-2 page table is accessed.
+ */
+#define HV_PTE_NO_ALLOC_L2           (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L2)
+
+/** Is this a priority page?
+ *
+ * If this bit is set, the page described by the PTE will be given
+ * priority in the cache.  Normally this translates into allowing the
+ * page to use only the "red" half of the cache.  The client may wish to
+ * then use the hv_set_caching service to specify that other pages which
+ * alias this page will use only the "black" half of the cache.
+ *
+ * If the Cached Priority bit is clear, the hypervisor uses the
+ * current hv_set_caching() value to choose how to cache the page.
+ *
+ * It is illegal to set the Cached Priority bit if the Non-Cached bit
+ * is set and the Cached Remotely bit is clear, i.e. if requests to
+ * the page map directly to memory.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_CACHED_PRIORITY       (__HV_PTE_ONE << \
+                                      HV_PTE_INDEX_CACHED_PRIORITY)
+
+/** Is this a readable mapping?
+ *
+ * If this bit is set, code will be permitted to read from (e.g.,
+ * issue load instructions against) the virtual addresses mapped by
+ * this PTE.
+ *
+ * It is illegal for this bit to be clear if the Writable bit is set.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_READABLE              (__HV_PTE_ONE << HV_PTE_INDEX_READABLE)
+
+/** Is this a writable mapping?
+ *
+ * If this bit is set, code will be permitted to write to (e.g., issue
+ * store instructions against) the virtual addresses mapped by this
+ * PTE.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_WRITABLE              (__HV_PTE_ONE << HV_PTE_INDEX_WRITABLE)
+
+/** Is this an executable mapping?
+ *
+ * If this bit is set, code will be permitted to execute from
+ * (e.g., jump to) the virtual addresses mapped by this PTE.
+ *
+ * This bit applies to any processor on the tile, if there are more
+ * than one.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_EXECUTABLE            (__HV_PTE_ONE << HV_PTE_INDEX_EXECUTABLE)
+
+/** The width of a LOTAR's x or y bitfield. */
+#define HV_LOTAR_WIDTH 11
+
+/** Converts an x,y pair to a LOTAR value. */
+#define HV_XY_TO_LOTAR(x, y) ((HV_LOTAR)(((x) << HV_LOTAR_WIDTH) | (y)))
+
+/** Extracts the X component of a lotar. */
+#define HV_LOTAR_X(lotar) ((lotar) >> HV_LOTAR_WIDTH)
+
+/** Extracts the Y component of a lotar. */
+#define HV_LOTAR_Y(lotar) ((lotar) & ((1 << HV_LOTAR_WIDTH) - 1))
+
+#ifndef __ASSEMBLER__
+
+/** Define accessor functions for a PTE bit. */
+#define _HV_BIT(name, bit)                                      \
+static __inline int                                             \
+hv_pte_get_##name(HV_PTE pte)                                   \
+{                                                               \
+  return (pte.val >> HV_PTE_INDEX_##bit) & 1;                   \
+}                                                               \
+                                                                \
+static __inline HV_PTE                                          \
+hv_pte_set_##name(HV_PTE pte)                                   \
+{                                                               \
+  pte.val |= 1ULL << HV_PTE_INDEX_##bit;                        \
+  return pte;                                                   \
+}                                                               \
+                                                                \
+static __inline HV_PTE                                          \
+hv_pte_clear_##name(HV_PTE pte)                                 \
+{                                                               \
+  pte.val &= ~(1ULL << HV_PTE_INDEX_##bit);                     \
+  return pte;                                                   \
+}
+
+/* Generate accessors to get, set, and clear various PTE flags.
+ */
+_HV_BIT(present,         PRESENT)
+_HV_BIT(page,            PAGE)
+_HV_BIT(client0,         CLIENT0)
+_HV_BIT(client1,         CLIENT1)
+_HV_BIT(migrating,       MIGRATING)
+_HV_BIT(nc,              NC)
+_HV_BIT(readable,        READABLE)
+_HV_BIT(writable,        WRITABLE)
+_HV_BIT(executable,      EXECUTABLE)
+_HV_BIT(accessed,        ACCESSED)
+_HV_BIT(dirty,           DIRTY)
+_HV_BIT(no_alloc_l1,     NO_ALLOC_L1)
+_HV_BIT(no_alloc_l2,     NO_ALLOC_L2)
+_HV_BIT(cached_priority, CACHED_PRIORITY)
+_HV_BIT(global,          GLOBAL)
+_HV_BIT(user,            USER)
+
+#undef _HV_BIT
+
+/** Get the page mode from the PTE.
+ *
+ * This field generally determines whether and how accesses to the page
+ * are cached; the HV_PTE_MODE_xxx symbols define the legal values for the
+ * page mode.  The NC, NO_ALLOC_L1, and NO_ALLOC_L2 bits modify this
+ * general policy.
+ */
+static __inline unsigned int
+hv_pte_get_mode(const HV_PTE pte)
+{
+  return (((__hv32) pte.val) >> HV_PTE_INDEX_MODE) &
+         ((1 << HV_PTE_MODE_BITS) - 1);
+}
+
+/** Set the page mode into a PTE.  See hv_pte_get_mode. */
+static __inline HV_PTE
+hv_pte_set_mode(HV_PTE pte, unsigned int val)
+{
+  pte.val &= ~(((1ULL << HV_PTE_MODE_BITS) - 1) << HV_PTE_INDEX_MODE);
+  pte.val |= val << HV_PTE_INDEX_MODE;
+  return pte;
+}
+
+/** Get the page frame number from the PTE.
+ *
+ * This field contains the upper bits of the CPA (client physical
+ * address) of the target page; the complete CPA is this field with
+ * HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it.
+ *
+ * For PTEs in a level-1 page table where the Page bit is set, the
+ * CPA must be aligned modulo the large page size.
+ */
+static __inline unsigned int
+hv_pte_get_pfn(const HV_PTE pte)
+{
+  return pte.val >> HV_PTE_INDEX_PFN;
+}
+
+
+/** Set the page frame number into a PTE.  See hv_pte_get_pfn. */
+static __inline HV_PTE
+hv_pte_set_pfn(HV_PTE pte, unsigned int val)
+{
+  /*
+   * Note that the use of "PTFN" in the next line is intentional; we
+   * don't want any garbage lower bits left in that field.
+   */
+  pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN);
+  pte.val |= (__hv64) val << HV_PTE_INDEX_PFN;
+  return pte;
+}
+
+/** Get the page table frame number from the PTE.
+ *
+ * This field contains the upper bits of the CPA (client physical
+ * address) of the target page table; the complete CPA is this field with
+ * with HV_PAGE_TABLE_ALIGN zero bits appended to it.
+ *
+ * For PTEs in a level-1 page table when the Page bit is not set, the
+ * CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and
+ * the level-2 page table size.
+ */
+static __inline unsigned long
+hv_pte_get_ptfn(const HV_PTE pte)
+{
+  return pte.val >> HV_PTE_INDEX_PTFN;
+}
+
+
+/** Set the page table frame number into a PTE.  See hv_pte_get_ptfn. */
+static __inline HV_PTE
+hv_pte_set_ptfn(HV_PTE pte, unsigned long val)
+{
+  pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS)-1) << HV_PTE_INDEX_PTFN);
+  pte.val |= (__hv64) val << HV_PTE_INDEX_PTFN;
+  return pte;
+}
+
+
+/** Get the remote tile caching this page.
+ *
+ * Specifies the remote tile which is providing the L3 cache for this page.
+ *
+ * This field is ignored unless the page mode is HV_PTE_MODE_CACHE_TILE_L3.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this field determines how the
+ * level-2 page table is accessed.
+ */
+static __inline unsigned int
+hv_pte_get_lotar(const HV_PTE pte)
+{
+  unsigned int lotar = ((__hv32) pte.val) >> HV_PTE_INDEX_LOTAR;
+
+  return HV_XY_TO_LOTAR( (lotar >> (HV_PTE_LOTAR_BITS / 2)),
+                         (lotar & ((1 << (HV_PTE_LOTAR_BITS / 2)) - 1)) );
+}
+
+
+/** Set the remote tile caching a page into a PTE.  See hv_pte_get_lotar. */
+static __inline HV_PTE
+hv_pte_set_lotar(HV_PTE pte, unsigned int val)
+{
+  unsigned int x = HV_LOTAR_X(val);
+  unsigned int y = HV_LOTAR_Y(val);
+
+  pte.val &= ~(((1ULL << HV_PTE_LOTAR_BITS)-1) << HV_PTE_INDEX_LOTAR);
+  pte.val |= (x << (HV_PTE_INDEX_LOTAR + HV_PTE_LOTAR_BITS / 2)) |
+             (y << HV_PTE_INDEX_LOTAR);
+  return pte;
+}
+
+#endif  /* !__ASSEMBLER__ */
+
+/** Converts a client physical address to a pfn. */
+#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Converts a pfn to a client physical address. */
+#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Converts a client physical address to a ptfn. */
+#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Converts a ptfn to a client physical address. */
+#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Converts a ptfn to a pfn. */
+#define HV_PTFN_TO_PFN(p) \
+  ((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Converts a pfn to a ptfn. */
+#define HV_PFN_TO_PTFN(p) \
+  ((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Log number of HV_PTE entries in L0 page table */
+#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN)
+
+/** Number of HV_PTE entries in L0 page table */
+#define HV_L0_ENTRIES (1 << HV_LOG2_L0_ENTRIES)
+
+/** Log size of L0 page table in bytes */
+#define HV_LOG2_L0_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L0_ENTRIES)
+
+/** Size of L0 page table in bytes */
+#define HV_L0_SIZE (1 << HV_LOG2_L0_SIZE)
+
+#ifdef __ASSEMBLER__
+
+/** Index in L0 for a specific VA */
+#define HV_L0_INDEX(va) \
+  (((va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1))
+
+#else
+
+/** Index in L1 for a specific VA */
+#define HV_L0_INDEX(va) \
+  (((HV_VirtAddr)(va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1))
+
+#endif
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Log number of HV_PTE entries in L1 page table */
+#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE)
+
+/** Number of HV_PTE entries in L1 page table */
+#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES)
+
+/** Log size of L1 page table in bytes */
+#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES)
+
+/** Size of L1 page table in bytes */
+#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE)
+
+/** Log number of HV_PTE entries in level-2 page table */
+#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Number of HV_PTE entries in level-2 page table */
+#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES)
+
+/** Log size of level-2 page table in bytes */
+#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES)
+
+/** Size of level-2 page table in bytes */
+#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE)
+
+#ifdef __ASSEMBLER__
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+  (((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+
+#else /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+  (((va) >> HV_LOG2_PAGE_SIZE_LARGE))
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in level-2 page table for a specific VA */
+#define HV_L2_INDEX(va) \
+  (((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+
+#else /* __ASSEMBLER __ */
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+  (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+
+#else /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+  (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE))
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in level-2 page table for a specific VA */
+#define HV_L2_INDEX(va) \
+  (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+
+#endif /* __ASSEMBLER __ */
+
+#endif /* _TILE_HV_H */
diff --git a/arch/tile/include/hv/pagesize.h b/arch/tile/include/hv/pagesize.h
new file mode 100644
index 00000000000..58bed114fed
--- /dev/null
+++ b/arch/tile/include/hv/pagesize.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file pagesize.h
+ */
+
+#ifndef _HV_PAGESIZE_H
+#define _HV_PAGESIZE_H
+
+/** The log2 of the size of small pages, in bytes. This value should
+ * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ */
+#define HV_LOG2_PAGE_SIZE_SMALL 16
+
+/** The log2 of the size of large pages, in bytes. This value should be
+ * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ */
+#define HV_LOG2_PAGE_SIZE_LARGE 24
+
+#endif /* _HV_PAGESIZE_H */
diff --git a/arch/tile/include/hv/syscall_public.h b/arch/tile/include/hv/syscall_public.h
new file mode 100644
index 00000000000..9cc0837e69f
--- /dev/null
+++ b/arch/tile/include/hv/syscall_public.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file syscall.h
+ * Indices for the hypervisor system calls that are intended to be called
+ * directly, rather than only through hypervisor-generated "glue" code.
+ */
+
+#ifndef _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H
+#define _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H
+
+/** Fast syscall flag bit location.  When this bit is set, the hypervisor
+ *  handles the syscall specially.
+ */
+#define HV_SYS_FAST_SHIFT                 14
+
+/** Fast syscall flag bit mask. */
+#define HV_SYS_FAST_MASK                  (1 << HV_SYS_FAST_SHIFT)
+
+/** Bit location for flagging fast syscalls that can be called from PL0. */
+#define HV_SYS_FAST_PLO_SHIFT             13
+
+/** Fast syscall allowing PL0 bit mask. */
+#define HV_SYS_FAST_PL0_MASK              (1 << HV_SYS_FAST_PLO_SHIFT)
+
+/** Perform an MF that waits for all victims to reach DRAM. */
+#define HV_SYS_fence_incoherent         (51 | HV_SYS_FAST_MASK \
+                                       | HV_SYS_FAST_PL0_MASK)
+
+#endif /* !_SYS_HV_INCLUDE_SYSCALL_PUBLIC_H */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
new file mode 100644
index 00000000000..112b1e248f0
--- /dev/null
+++ b/arch/tile/kernel/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the Linux/TILE kernel.
+#
+
+extra-y := vmlinux.lds head_$(BITS).o
+obj-y := backtrace.o entry.o init_task.o irq.o messaging.o \
+	pci-dma.o proc.o process.o ptrace.o reboot.o \
+	setup.o signal.o single_step.o stack.o sys.o time.o traps.o \
+	intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
+
+obj-$(CONFIG_HARDWALL)		+= hardwall.o
+obj-$(CONFIG_TILEGX)		+= futex_64.o
+obj-$(CONFIG_COMPAT)		+= compat.o compat_signal.o
+obj-$(CONFIG_SMP)		+= smpboot.o smp.o tlb.o
+obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
diff --git a/arch/tile/kernel/asm-offsets.c b/arch/tile/kernel/asm-offsets.c
new file mode 100644
index 00000000000..01ddf19cc36
--- /dev/null
+++ b/arch/tile/kernel/asm-offsets.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Generates definitions from c-type structures used by assembly sources.
+ */
+
+#include <linux/kbuild.h>
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+#include <linux/ptrace.h>
+#include <hv/hypervisor.h>
+
+/* Check for compatible compiler early in the build. */
+#ifdef CONFIG_TILEGX
+# ifndef __tilegx__
+#  error Can only build TILE-Gx configurations with tilegx compiler
+# endif
+# ifndef __LP64__
+#  error Must not specify -m32 when building the TILE-Gx kernel
+# endif
+#else
+# ifdef __tilegx__
+#  error Can not build TILEPro/TILE64 configurations with tilegx compiler
+# endif
+#endif
+
+void foo(void)
+{
+	DEFINE(SINGLESTEP_STATE_BUFFER_OFFSET, \
+	       offsetof(struct single_step_state, buffer));
+	DEFINE(SINGLESTEP_STATE_FLAGS_OFFSET, \
+	       offsetof(struct single_step_state, flags));
+	DEFINE(SINGLESTEP_STATE_ORIG_PC_OFFSET, \
+	       offsetof(struct single_step_state, orig_pc));
+	DEFINE(SINGLESTEP_STATE_NEXT_PC_OFFSET, \
+	       offsetof(struct single_step_state, next_pc));
+	DEFINE(SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET, \
+	       offsetof(struct single_step_state, branch_next_pc));
+	DEFINE(SINGLESTEP_STATE_UPDATE_VALUE_OFFSET, \
+	       offsetof(struct single_step_state, update_value));
+
+	DEFINE(THREAD_INFO_TASK_OFFSET, \
+	       offsetof(struct thread_info, task));
+	DEFINE(THREAD_INFO_FLAGS_OFFSET, \
+	       offsetof(struct thread_info, flags));
+	DEFINE(THREAD_INFO_STATUS_OFFSET, \
+	       offsetof(struct thread_info, status));
+	DEFINE(THREAD_INFO_HOMECACHE_CPU_OFFSET, \
+	       offsetof(struct thread_info, homecache_cpu));
+	DEFINE(THREAD_INFO_STEP_STATE_OFFSET, \
+	       offsetof(struct thread_info, step_state));
+
+	DEFINE(TASK_STRUCT_THREAD_KSP_OFFSET,
+	       offsetof(struct task_struct, thread.ksp));
+	DEFINE(TASK_STRUCT_THREAD_PC_OFFSET,
+	       offsetof(struct task_struct, thread.pc));
+
+	DEFINE(HV_TOPOLOGY_WIDTH_OFFSET, \
+	       offsetof(HV_Topology, width));
+	DEFINE(HV_TOPOLOGY_HEIGHT_OFFSET, \
+	       offsetof(HV_Topology, height));
+
+	DEFINE(IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET, \
+	       offsetof(irq_cpustat_t, irq_syscall_count));
+}
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
new file mode 100644
index 00000000000..77265f3b58d
--- /dev/null
+++ b/arch/tile/kernel/backtrace.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include <asm/backtrace.h>
+
+#include <arch/chip.h>
+
+#if TILE_CHIP < 10
+
+
+#include <asm/opcode-tile.h>
+
+
+#define TREG_SP 54
+#define TREG_LR 55
+
+
+/** A decoded bundle used for backtracer analysis. */
+struct BacktraceBundle {
+	tile_bundle_bits bits;
+	int num_insns;
+	struct tile_decoded_instruction
+	insns[TILE_MAX_INSTRUCTIONS_PER_BUNDLE];
+};
+
+
+/* This implementation only makes sense for native tools. */
+/** Default function to read memory. */
+static bool bt_read_memory(void *result, VirtualAddress addr,
+			   size_t size, void *extra)
+{
+	/* FIXME: this should do some horrible signal stuff to catch
+	 * SEGV cleanly and fail.
+	 *
+	 * Or else the caller should do the setjmp for efficiency.
+	 */
+
+	memcpy(result, (const void *)addr, size);
+	return true;
+}
+
+
+/** Locates an instruction inside the given bundle that
+ * has the specified mnemonic, and whose first 'num_operands_to_match'
+ * operands exactly match those in 'operand_values'.
+ */
+static const struct tile_decoded_instruction *find_matching_insn(
+	const struct BacktraceBundle *bundle,
+	tile_mnemonic mnemonic,
+	const int *operand_values,
+	int num_operands_to_match)
+{
+	int i, j;
+	bool match;
+
+	for (i = 0; i < bundle->num_insns; i++) {
+		const struct tile_decoded_instruction *insn =
+			&bundle->insns[i];
+
+		if (insn->opcode->mnemonic != mnemonic)
+			continue;
+
+		match = true;
+		for (j = 0; j < num_operands_to_match; j++) {
+			if (operand_values[j] != insn->operand_values[j]) {
+				match = false;
+				break;
+			}
+		}
+
+		if (match)
+			return insn;
+	}
+
+	return NULL;
+}
+
+/** Does this bundle contain an 'iret' instruction? */
+static inline bool bt_has_iret(const struct BacktraceBundle *bundle)
+{
+	return find_matching_insn(bundle, TILE_OPC_IRET, NULL, 0) != NULL;
+}
+
+/** Does this bundle contain an 'addi sp, sp, OFFSET' or
+ * 'addli sp, sp, OFFSET' instruction, and if so, what is OFFSET?
+ */
+static bool bt_has_addi_sp(const struct BacktraceBundle *bundle, int *adjust)
+{
+	static const int vals[2] = { TREG_SP, TREG_SP };
+
+	const struct tile_decoded_instruction *insn =
+		find_matching_insn(bundle, TILE_OPC_ADDI, vals, 2);
+	if (insn == NULL)
+		insn = find_matching_insn(bundle, TILE_OPC_ADDLI, vals, 2);
+	if (insn == NULL)
+		return false;
+
+	*adjust = insn->operand_values[2];
+	return true;
+}
+
+/** Does this bundle contain any 'info OP' or 'infol OP'
+ * instruction, and if so, what are their OP?  Note that OP is interpreted
+ * as an unsigned value by this code since that's what the caller wants.
+ * Returns the number of info ops found.
+ */
+static int bt_get_info_ops(const struct BacktraceBundle *bundle,
+		int operands[MAX_INFO_OPS_PER_BUNDLE])
+{
+	int num_ops = 0;
+	int i;
+
+	for (i = 0; i < bundle->num_insns; i++) {
+		const struct tile_decoded_instruction *insn =
+			&bundle->insns[i];
+
+		if (insn->opcode->mnemonic == TILE_OPC_INFO ||
+		    insn->opcode->mnemonic == TILE_OPC_INFOL) {
+			operands[num_ops++] = insn->operand_values[0];
+		}
+	}
+
+	return num_ops;
+}
+
+/** Does this bundle contain a jrp instruction, and if so, to which
+ * register is it jumping?
+ */
+static bool bt_has_jrp(const struct BacktraceBundle *bundle, int *target_reg)
+{
+	const struct tile_decoded_instruction *insn =
+		find_matching_insn(bundle, TILE_OPC_JRP, NULL, 0);
+	if (insn == NULL)
+		return false;
+
+	*target_reg = insn->operand_values[0];
+	return true;
+}
+
+/** Does this bundle modify the specified register in any way? */
+static bool bt_modifies_reg(const struct BacktraceBundle *bundle, int reg)
+{
+	int i, j;
+	for (i = 0; i < bundle->num_insns; i++) {
+		const struct tile_decoded_instruction *insn =
+			&bundle->insns[i];
+
+		if (insn->opcode->implicitly_written_register == reg)
+			return true;
+
+		for (j = 0; j < insn->opcode->num_operands; j++)
+			if (insn->operands[j]->is_dest_reg &&
+			    insn->operand_values[j] == reg)
+				return true;
+	}
+
+	return false;
+}
+
+/** Does this bundle modify sp? */
+static inline bool bt_modifies_sp(const struct BacktraceBundle *bundle)
+{
+	return bt_modifies_reg(bundle, TREG_SP);
+}
+
+/** Does this bundle modify lr? */
+static inline bool bt_modifies_lr(const struct BacktraceBundle *bundle)
+{
+	return bt_modifies_reg(bundle, TREG_LR);
+}
+
+/** Does this bundle contain the instruction 'move fp, sp'? */
+static inline bool bt_has_move_r52_sp(const struct BacktraceBundle *bundle)
+{
+	static const int vals[2] = { 52, TREG_SP };
+	return find_matching_insn(bundle, TILE_OPC_MOVE, vals, 2) != NULL;
+}
+
+/** Does this bundle contain the instruction 'sw sp, lr'? */
+static inline bool bt_has_sw_sp_lr(const struct BacktraceBundle *bundle)
+{
+	static const int vals[2] = { TREG_SP, TREG_LR };
+	return find_matching_insn(bundle, TILE_OPC_SW, vals, 2) != NULL;
+}
+
+/** Locates the caller's PC and SP for a program starting at the
+ * given address.
+ */
+static void find_caller_pc_and_caller_sp(CallerLocation *location,
+					 const VirtualAddress start_pc,
+					 BacktraceMemoryReader read_memory_func,
+					 void *read_memory_func_extra)
+{
+	/* Have we explicitly decided what the sp is,
+	 * rather than just the default?
+	 */
+	bool sp_determined = false;
+
+	/* Has any bundle seen so far modified lr? */
+	bool lr_modified = false;
+
+	/* Have we seen a move from sp to fp? */
+	bool sp_moved_to_r52 = false;
+
+	/* Have we seen a terminating bundle? */
+	bool seen_terminating_bundle = false;
+
+	/* Cut down on round-trip reading overhead by reading several
+	 * bundles at a time.
+	 */
+	tile_bundle_bits prefetched_bundles[32];
+	int num_bundles_prefetched = 0;
+	int next_bundle = 0;
+	VirtualAddress pc;
+
+	/* Default to assuming that the caller's sp is the current sp.
+	 * This is necessary to handle the case where we start backtracing
+	 * right at the end of the epilog.
+	 */
+	location->sp_location = SP_LOC_OFFSET;
+	location->sp_offset = 0;
+
+	/* Default to having no idea where the caller PC is. */
+	location->pc_location = PC_LOC_UNKNOWN;
+
+	/* Don't even try if the PC is not aligned. */
+	if (start_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0)
+		return;
+
+	for (pc = start_pc;; pc += sizeof(tile_bundle_bits)) {
+
+		struct BacktraceBundle bundle;
+		int num_info_ops, info_operands[MAX_INFO_OPS_PER_BUNDLE];
+		int one_ago, jrp_reg;
+		bool has_jrp;
+
+		if (next_bundle >= num_bundles_prefetched) {
+			/* Prefetch some bytes, but don't cross a page
+			 * boundary since that might cause a read failure we
+			 * don't care about if we only need the first few
+			 * bytes. Note: we don't care what the actual page
+			 * size is; using the minimum possible page size will
+			 * prevent any problems.
+			 */
+			unsigned int bytes_to_prefetch = 4096 - (pc & 4095);
+			if (bytes_to_prefetch > sizeof prefetched_bundles)
+				bytes_to_prefetch = sizeof prefetched_bundles;
+
+			if (!read_memory_func(prefetched_bundles, pc,
+					      bytes_to_prefetch,
+					      read_memory_func_extra)) {
+				if (pc == start_pc) {
+					/* The program probably called a bad
+					 * address, such as a NULL pointer.
+					 * So treat this as if we are at the
+					 * start of the function prolog so the
+					 * backtrace will show how we got here.
+					 */
+					location->pc_location = PC_LOC_IN_LR;
+					return;
+				}
+
+				/* Unreadable address. Give up. */
+				break;
+			}
+
+			next_bundle = 0;
+			num_bundles_prefetched =
+				bytes_to_prefetch / sizeof(tile_bundle_bits);
+		}
+
+		/* Decode the next bundle. */
+		bundle.bits = prefetched_bundles[next_bundle++];
+		bundle.num_insns =
+			parse_insn_tile(bundle.bits, pc, bundle.insns);
+		num_info_ops = bt_get_info_ops(&bundle, info_operands);
+
+		/* First look at any one_ago info ops if they are interesting,
+		 * since they should shadow any non-one-ago info ops.
+		 */
+		for (one_ago = (pc != start_pc) ? 1 : 0;
+		     one_ago >= 0; one_ago--) {
+			int i;
+			for (i = 0; i < num_info_ops; i++) {
+				int info_operand = info_operands[i];
+				if (info_operand < CALLER_UNKNOWN_BASE)	{
+					/* Weird; reserved value, ignore it. */
+					continue;
+				}
+
+				/* Skip info ops which are not in the
+				 * "one_ago" mode we want right now.
+				 */
+				if (((info_operand & ONE_BUNDLE_AGO_FLAG) != 0)
+				    != (one_ago != 0))
+					continue;
+
+				/* Clear the flag to make later checking
+				 * easier. */
+				info_operand &= ~ONE_BUNDLE_AGO_FLAG;
+
+				/* Default to looking at PC_IN_LR_FLAG. */
+				if (info_operand & PC_IN_LR_FLAG)
+					location->pc_location =
+						PC_LOC_IN_LR;
+				else
+					location->pc_location =
+						PC_LOC_ON_STACK;
+
+				switch (info_operand) {
+				case CALLER_UNKNOWN_BASE:
+					location->pc_location = PC_LOC_UNKNOWN;
+					location->sp_location = SP_LOC_UNKNOWN;
+					return;
+
+				case CALLER_SP_IN_R52_BASE:
+				case CALLER_SP_IN_R52_BASE | PC_IN_LR_FLAG:
+					location->sp_location = SP_LOC_IN_R52;
+					return;
+
+				default:
+				{
+					const unsigned int val = info_operand
+						- CALLER_SP_OFFSET_BASE;
+					const unsigned int sp_offset =
+						(val >> NUM_INFO_OP_FLAGS) * 8;
+					if (sp_offset < 32768) {
+						/* This is a properly encoded
+						 * SP offset. */
+						location->sp_location =
+							SP_LOC_OFFSET;
+						location->sp_offset =
+							sp_offset;
+						return;
+					} else {
+						/* This looked like an SP
+						 * offset, but it's outside
+						 * the legal range, so this
+						 * must be an unrecognized
+						 * info operand.  Ignore it.
+						 */
+					}
+				}
+				break;
+				}
+			}
+		}
+
+		if (seen_terminating_bundle) {
+			/* We saw a terminating bundle during the previous
+			 * iteration, so we were only looking for an info op.
+			 */
+			break;
+		}
+
+		if (bundle.bits == 0) {
+			/* Wacky terminating bundle. Stop looping, and hope
+			 * we've already seen enough to find the caller.
+			 */
+			break;
+		}
+
+		/*
+		 * Try to determine caller's SP.
+		 */
+
+		if (!sp_determined) {
+			int adjust;
+			if (bt_has_addi_sp(&bundle, &adjust)) {
+				location->sp_location = SP_LOC_OFFSET;
+
+				if (adjust <= 0) {
+					/* We are in prolog about to adjust
+					 * SP. */
+					location->sp_offset = 0;
+				} else {
+					/* We are in epilog restoring SP. */
+					location->sp_offset = adjust;
+				}
+
+				sp_determined = true;
+			} else {
+				if (bt_has_move_r52_sp(&bundle)) {
+					/* Maybe in prolog, creating an
+					 * alloca-style frame.  But maybe in
+					 * the middle of a fixed-size frame
+					 * clobbering r52 with SP.
+					 */
+					sp_moved_to_r52 = true;
+				}
+
+				if (bt_modifies_sp(&bundle)) {
+					if (sp_moved_to_r52) {
+						/* We saw SP get saved into
+						 * r52 earlier (or now), which
+						 * must have been in the
+						 * prolog, so we now know that
+						 * SP is still holding the
+						 * caller's sp value.
+						 */
+						location->sp_location =
+							SP_LOC_OFFSET;
+						location->sp_offset = 0;
+					} else {
+						/* Someone must have saved
+						 * aside the caller's SP value
+						 * into r52, so r52 holds the
+						 * current value.
+						 */
+						location->sp_location =
+							SP_LOC_IN_R52;
+					}
+					sp_determined = true;
+				}
+			}
+		}
+
+		if (bt_has_iret(&bundle)) {
+			/* This is a terminating bundle. */
+			seen_terminating_bundle = true;
+			continue;
+		}
+
+		/*
+		 * Try to determine caller's PC.
+		 */
+
+		jrp_reg = -1;
+		has_jrp = bt_has_jrp(&bundle, &jrp_reg);
+		if (has_jrp)
+			seen_terminating_bundle = true;
+
+		if (location->pc_location == PC_LOC_UNKNOWN) {
+			if (has_jrp) {
+				if (jrp_reg == TREG_LR && !lr_modified) {
+					/* Looks like a leaf function, or else
+					 * lr is already restored. */
+					location->pc_location =
+						PC_LOC_IN_LR;
+				} else {
+					location->pc_location =
+						PC_LOC_ON_STACK;
+				}
+			} else if (bt_has_sw_sp_lr(&bundle)) {
+				/* In prolog, spilling initial lr to stack. */
+				location->pc_location = PC_LOC_IN_LR;
+			} else if (bt_modifies_lr(&bundle)) {
+				lr_modified = true;
+			}
+		}
+	}
+}
+
+void backtrace_init(BacktraceIterator *state,
+		    BacktraceMemoryReader read_memory_func,
+		    void *read_memory_func_extra,
+		    VirtualAddress pc, VirtualAddress lr,
+		    VirtualAddress sp, VirtualAddress r52)
+{
+	CallerLocation location;
+	VirtualAddress fp, initial_frame_caller_pc;
+
+	if (read_memory_func == NULL) {
+		read_memory_func = bt_read_memory;
+	}
+
+	/* Find out where we are in the initial frame. */
+	find_caller_pc_and_caller_sp(&location, pc,
+				     read_memory_func, read_memory_func_extra);
+
+	switch (location.sp_location) {
+	case SP_LOC_UNKNOWN:
+		/* Give up. */
+		fp = -1;
+		break;
+
+	case SP_LOC_IN_R52:
+		fp = r52;
+		break;
+
+	case SP_LOC_OFFSET:
+		fp = sp + location.sp_offset;
+		break;
+
+	default:
+		/* Give up. */
+		fp = -1;
+		break;
+	}
+
+	/* The frame pointer should theoretically be aligned mod 8. If
+	 * it's not even aligned mod 4 then something terrible happened
+	 * and we should mark it as invalid.
+	 */
+	if (fp % 4 != 0)
+		fp = -1;
+
+	/* -1 means "don't know initial_frame_caller_pc". */
+	initial_frame_caller_pc = -1;
+
+	switch (location.pc_location) {
+	case PC_LOC_UNKNOWN:
+		/* Give up. */
+		fp = -1;
+		break;
+
+	case PC_LOC_IN_LR:
+		if (lr == 0 || lr % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) {
+			/* Give up. */
+			fp = -1;
+		} else {
+			initial_frame_caller_pc = lr;
+		}
+		break;
+
+	case PC_LOC_ON_STACK:
+		/* Leave initial_frame_caller_pc as -1,
+		 * meaning check the stack.
+		 */
+		break;
+
+	default:
+		/* Give up. */
+		fp = -1;
+		break;
+	}
+
+	state->pc = pc;
+	state->sp = sp;
+	state->fp = fp;
+	state->initial_frame_caller_pc = initial_frame_caller_pc;
+	state->read_memory_func = read_memory_func;
+	state->read_memory_func_extra = read_memory_func_extra;
+}
+
+bool backtrace_next(BacktraceIterator *state)
+{
+	VirtualAddress next_fp, next_pc, next_frame[2];
+
+	if (state->fp == -1) {
+		/* No parent frame. */
+		return false;
+	}
+
+	/* Try to read the frame linkage data chaining to the next function. */
+	if (!state->read_memory_func(&next_frame, state->fp, sizeof next_frame,
+				     state->read_memory_func_extra)) {
+		return false;
+	}
+
+	next_fp = next_frame[1];
+	if (next_fp % 4 != 0) {
+		/* Caller's frame pointer is suspect, so give up.
+		 * Technically it should be aligned mod 8, but we will
+		 * be forgiving here.
+		 */
+		return false;
+	}
+
+	if (state->initial_frame_caller_pc != -1) {
+		/* We must be in the initial stack frame and already know the
+		 * caller PC.
+		 */
+		next_pc = state->initial_frame_caller_pc;
+
+		/* Force reading stack next time, in case we were in the
+		 * initial frame.  We don't do this above just to paranoidly
+		 * avoid changing the struct at all when we return false.
+		 */
+		state->initial_frame_caller_pc = -1;
+	} else {
+		/* Get the caller PC from the frame linkage area. */
+		next_pc = next_frame[0];
+		if (next_pc == 0 ||
+		    next_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) {
+			/* The PC is suspect, so give up. */
+			return false;
+		}
+	}
+
+	/* Update state to become the caller's stack frame. */
+	state->pc = next_pc;
+	state->sp = state->fp;
+	state->fp = next_fp;
+
+	return true;
+}
+
+#else /* TILE_CHIP < 10 */
+
+void backtrace_init(BacktraceIterator *state,
+		    BacktraceMemoryReader read_memory_func,
+		    void *read_memory_func_extra,
+		    VirtualAddress pc, VirtualAddress lr,
+		    VirtualAddress sp, VirtualAddress r52)
+{
+	state->pc = pc;
+	state->sp = sp;
+	state->fp = -1;
+	state->initial_frame_caller_pc = -1;
+	state->read_memory_func = read_memory_func;
+	state->read_memory_func_extra = read_memory_func_extra;
+}
+
+bool backtrace_next(BacktraceIterator *state) { return false; }
+
+#endif /* TILE_CHIP < 10 */
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
new file mode 100644
index 00000000000..b1e06d04155
--- /dev/null
+++ b/arch/tile/kernel/compat.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Adjust unistd.h to provide 32-bit numbers and functions. */
+#define __SYSCALL_COMPAT
+
+#include <linux/compat.h>
+#include <linux/msg.h>
+#include <linux/syscalls.h>
+#include <linux/kdev_t.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
+#include <linux/signal.h>
+#include <asm/syscalls.h>
+
+/*
+ * Syscalls that take 64-bit numbers traditionally take them in 32-bit
+ * "high" and "low" value parts on 32-bit architectures.
+ * In principle, one could imagine passing some register arguments as
+ * fully 64-bit on TILE-Gx in 32-bit mode, but it seems easier to
+ * adapt the usual convention.
+ */
+
+long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high)
+{
+	return sys_truncate(filename, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high)
+{
+	return sys_ftruncate(fd, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count,
+			u32 dummy, u32 low, u32 high)
+{
+	return sys_pread64(fd, ubuf, count, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count,
+			 u32 dummy, u32 low, u32 high)
+{
+	return sys_pwrite64(fd, ubuf, count, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len)
+{
+	return sys_lookup_dcookie(((loff_t)high << 32) | low, buf, len);
+}
+
+long compat_sys_sync_file_range2(int fd, unsigned int flags,
+				 u32 offset_lo, u32 offset_hi,
+				 u32 nbytes_lo, u32 nbytes_hi)
+{
+	return sys_sync_file_range(fd, ((loff_t)offset_hi << 32) | offset_lo,
+				   ((loff_t)nbytes_hi << 32) | nbytes_lo,
+				   flags);
+}
+
+long compat_sys_fallocate(int fd, int mode,
+			  u32 offset_lo, u32 offset_hi,
+			  u32 len_lo, u32 len_hi)
+{
+	return sys_fallocate(fd, mode, ((loff_t)offset_hi << 32) | offset_lo,
+			     ((loff_t)len_hi << 32) | len_lo);
+}
+
+
+
+long compat_sys_sched_rr_get_interval(compat_pid_t pid,
+				      struct compat_timespec __user *interval)
+{
+	struct timespec t;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	ret = sys_sched_rr_get_interval(pid,
+					(struct timespec __force __user *)&t);
+	set_fs(old_fs);
+	if (put_compat_timespec(&t, interval))
+		return -EFAULT;
+	return ret;
+}
+
+/*
+ * The usual compat_sys_msgsnd() and _msgrcv() seem to be assuming
+ * some different calling convention than our normal 32-bit tile code.
+ */
+
+/* Already defined in ipc/compat.c, but we need it here. */
+struct compat_msgbuf {
+	compat_long_t mtype;
+	char mtext[1];
+};
+
+long tile_compat_sys_msgsnd(int msqid,
+			    struct compat_msgbuf __user *msgp,
+			    size_t msgsz, int msgflg)
+{
+	compat_long_t mtype;
+
+	if (get_user(mtype, &msgp->mtype))
+		return -EFAULT;
+	return do_msgsnd(msqid, mtype, msgp->mtext, msgsz, msgflg);
+}
+
+long tile_compat_sys_msgrcv(int msqid,
+			    struct compat_msgbuf __user *msgp,
+			    size_t msgsz, long msgtyp, int msgflg)
+{
+	long err, mtype;
+
+	err =  do_msgrcv(msqid, &mtype, msgp->mtext, msgsz, msgtyp, msgflg);
+	if (err < 0)
+		goto out;
+
+	if (put_user(mtype, &msgp->mtype))
+		err = -EFAULT;
+ out:
+	return err;
+}
+
+/* Provide the compat syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (compat_##call),
+
+/* The generic versions of these don't work for Tile. */
+#define compat_sys_msgrcv tile_compat_sys_msgrcv
+#define compat_sys_msgsnd tile_compat_sys_msgsnd
+
+/* See comments in sys.c */
+#define compat_sys_fadvise64 sys32_fadvise64
+#define compat_sys_fadvise64_64 sys32_fadvise64_64
+#define compat_sys_readahead sys32_readahead
+#define compat_sys_sync_file_range compat_sys_sync_file_range2
+
+/* The native 64-bit "struct stat" matches the 32-bit "struct stat64". */
+#define compat_sys_stat64 sys_newstat
+#define compat_sys_lstat64 sys_newlstat
+#define compat_sys_fstat64 sys_newfstat
+#define compat_sys_fstatat64 sys_newfstatat
+
+/* Pass full 64-bit values through ptrace. */
+#define compat_sys_ptrace tile_compat_sys_ptrace
+
+/*
+ * Note that we can't include <linux/unistd.h> here since the header
+ * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well.
+ */
+void *compat_sys_call_table[__NR_syscalls] = {
+	[0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
new file mode 100644
index 00000000000..d5efb215dd5
--- /dev/null
+++ b/arch/tile/kernel/compat_signal.c
@@ -0,0 +1,435 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/compat.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <asm/syscalls.h>
+#include <arch/interrupts.h>
+
+struct compat_sigaction {
+	compat_uptr_t sa_handler;
+	compat_ulong_t sa_flags;
+	compat_uptr_t sa_restorer;
+	sigset_t sa_mask __packed;
+};
+
+struct compat_sigaltstack {
+	compat_uptr_t ss_sp;
+	int ss_flags;
+	compat_size_t ss_size;
+};
+
+struct compat_ucontext {
+	compat_ulong_t	  uc_flags;
+	compat_uptr_t     uc_link;
+	struct compat_sigaltstack	  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+struct compat_siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+			int _sys_private;	/* not to be passed to user */
+			int _overrun_incr;	/* amount to add to overrun */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			unsigned int _pid;	/* sender's pid */
+			unsigned int _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			unsigned int _pid;	/* which child */
+			unsigned int _uid;	/* sender's uid */
+			int _status;		/* exit code */
+			compat_clock_t _utime;
+			compat_clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			unsigned int _addr;	/* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+};
+
+struct compat_rt_sigframe {
+	unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */
+	struct compat_siginfo info;
+	struct compat_ucontext uc;
+};
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
+			     struct compat_sigaction __user *oact,
+			     size_t sigsetsize)
+{
+	struct k_sigaction new_sa, old_sa;
+	int ret = -EINVAL;
+
+	/* XXX: Don't preclude handling different sized sigset_t's.  */
+	if (sigsetsize != sizeof(sigset_t))
+		goto out;
+
+	if (act) {
+		compat_uptr_t handler, restorer;
+
+		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+		    __get_user(handler, &act->sa_handler) ||
+		    __get_user(new_sa.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(restorer, &act->sa_restorer) ||
+		    __copy_from_user(&new_sa.sa.sa_mask, &act->sa_mask,
+				     sizeof(sigset_t)))
+			return -EFAULT;
+		new_sa.sa.sa_handler = compat_ptr(handler);
+		new_sa.sa.sa_restorer = compat_ptr(restorer);
+	}
+
+	ret = do_sigaction(sig, act ? &new_sa : NULL, oact ? &old_sa : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+		    __put_user(ptr_to_compat(old_sa.sa.sa_handler),
+			       &oact->sa_handler) ||
+		    __put_user(ptr_to_compat(old_sa.sa.sa_restorer),
+			       &oact->sa_restorer) ||
+		    __put_user(old_sa.sa.sa_flags, &oact->sa_flags) ||
+		    __copy_to_user(&oact->sa_mask, &old_sa.sa.sa_mask,
+				   sizeof(sigset_t)))
+			return -EFAULT;
+	}
+out:
+	return ret;
+}
+
+long compat_sys_rt_sigqueueinfo(int pid, int sig,
+				struct compat_siginfo __user *uinfo)
+{
+	siginfo_t info;
+	int ret;
+	mm_segment_t old_fs = get_fs();
+
+	if (copy_siginfo_from_user32(&info, uinfo))
+		return -EFAULT;
+	set_fs(KERNEL_DS);
+	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __force __user *)&info);
+	set_fs(old_fs);
+	return ret;
+}
+
+int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from)
+{
+	int err;
+
+	if (!access_ok(VERIFY_WRITE, to, sizeof(struct compat_siginfo)))
+		return -EFAULT;
+
+	/* If you change siginfo_t structure, please make sure that
+	   this code is fixed accordingly.
+	   It should never copy any pad contained in the structure
+	   to avoid security leaks, but must copy the generic
+	   3 ints plus the relevant union member.  */
+	err = __put_user(from->si_signo, &to->si_signo);
+	err |= __put_user(from->si_errno, &to->si_errno);
+	err |= __put_user((short)from->si_code, &to->si_code);
+
+	if (from->si_code < 0) {
+		err |= __put_user(from->si_pid, &to->si_pid);
+		err |= __put_user(from->si_uid, &to->si_uid);
+		err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
+	} else {
+		/*
+		 * First 32bits of unions are always present:
+		 * si_pid === si_band === si_tid === si_addr(LS half)
+		 */
+		err |= __put_user(from->_sifields._pad[0],
+				  &to->_sifields._pad[0]);
+		switch (from->si_code >> 16) {
+		case __SI_FAULT >> 16:
+			break;
+		case __SI_CHLD >> 16:
+			err |= __put_user(from->si_utime, &to->si_utime);
+			err |= __put_user(from->si_stime, &to->si_stime);
+			err |= __put_user(from->si_status, &to->si_status);
+			/* FALL THROUGH */
+		default:
+		case __SI_KILL >> 16:
+			err |= __put_user(from->si_uid, &to->si_uid);
+			break;
+		case __SI_POLL >> 16:
+			err |= __put_user(from->si_fd, &to->si_fd);
+			break;
+		case __SI_TIMER >> 16:
+			err |= __put_user(from->si_overrun, &to->si_overrun);
+			err |= __put_user(ptr_to_compat(from->si_ptr),
+					  &to->si_ptr);
+			break;
+			 /* This is not generated by the kernel as of now.  */
+		case __SI_RT >> 16:
+		case __SI_MESGQ >> 16:
+			err |= __put_user(from->si_uid, &to->si_uid);
+			err |= __put_user(from->si_int, &to->si_int);
+			break;
+		}
+	}
+	return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
+{
+	int err;
+	u32 ptr32;
+
+	if (!access_ok(VERIFY_READ, from, sizeof(struct compat_siginfo)))
+		return -EFAULT;
+
+	err = __get_user(to->si_signo, &from->si_signo);
+	err |= __get_user(to->si_errno, &from->si_errno);
+	err |= __get_user(to->si_code, &from->si_code);
+
+	err |= __get_user(to->si_pid, &from->si_pid);
+	err |= __get_user(to->si_uid, &from->si_uid);
+	err |= __get_user(ptr32, &from->si_ptr);
+	to->si_ptr = compat_ptr(ptr32);
+
+	return err;
+}
+
+long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+			     struct compat_sigaltstack __user *uoss_ptr,
+			     struct pt_regs *regs)
+{
+	stack_t uss, uoss;
+	int ret;
+	mm_segment_t seg;
+
+	if (uss_ptr) {
+		u32 ptr;
+
+		memset(&uss, 0, sizeof(stack_t));
+		if (!access_ok(VERIFY_READ, uss_ptr, sizeof(*uss_ptr)) ||
+			    __get_user(ptr, &uss_ptr->ss_sp) ||
+			    __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
+			    __get_user(uss.ss_size, &uss_ptr->ss_size))
+			return -EFAULT;
+		uss.ss_sp = compat_ptr(ptr);
+	}
+	seg = get_fs();
+	set_fs(KERNEL_DS);
+	ret = do_sigaltstack(uss_ptr ? (stack_t __user __force *)&uss : NULL,
+			     (stack_t __user __force *)&uoss,
+			     (unsigned long)compat_ptr(regs->sp));
+	set_fs(seg);
+	if (ret >= 0 && uoss_ptr)  {
+		if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(*uoss_ptr)) ||
+		    __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
+		    __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
+		    __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+			ret = -EFAULT;
+	}
+	return ret;
+}
+
+long _compat_sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct compat_rt_sigframe __user *frame =
+		(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
+	sigset_t set;
+	long r0;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+		goto badframe;
+
+	if (_compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
+		goto badframe;
+
+	return r0;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *compat_get_sigframe(struct k_sigaction *ka,
+					       struct pt_regs *regs,
+					       size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = (unsigned long)compat_ptr(regs->sp);
+
+	/*
+	 * If we are on the alternate signal stack and would overflow
+	 * it, don't.  Return an always-bogus address instead so we
+	 * will die with SIGSEGV.
+	 */
+	if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+		return (void __user __force *)-1UL;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	sp -= frame_size;
+	/*
+	 * Align the stack pointer according to the TILE ABI,
+	 * i.e. so that on function entry (sp & 15) == 0.
+	 */
+	sp &= -16UL;
+	return (void __user *) sp;
+}
+
+int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			  sigset_t *set, struct pt_regs *regs)
+{
+	unsigned long restorer;
+	struct compat_rt_sigframe __user *frame;
+	int err = 0;
+	int usig;
+
+	frame = compat_get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	usig = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	/* Always write at least the signal number for the stack backtracer. */
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		/* At sigreturn time, restore the callee-save registers too. */
+		err |= copy_siginfo_to_user32(&frame->info, info);
+		regs->flags |= PT_FLAGS_RESTORE_REGS;
+	} else {
+		err |= __put_user(info->si_signo, &frame->info.si_signo);
+	}
+
+	/* Create the ucontext.  */
+	err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(0, &frame->uc.uc_link);
+	err |= __put_user(ptr_to_compat((void *)(current->sas_ss_sp)),
+			  &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->sp),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+	if (err)
+		goto give_sigsegv;
+
+	restorer = VDSO_BASE;
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = ptr_to_compat_reg(ka->sa.sa_restorer);
+
+	/*
+	 * Set up registers for signal handler.
+	 * Registers that we don't modify keep the value they had from
+	 * user-space at the time we took the signal.
+	 */
+	regs->pc = ptr_to_compat_reg(ka->sa.sa_handler);
+	regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
+	regs->sp = ptr_to_compat_reg(frame);
+	regs->lr = restorer;
+	regs->regs[0] = (unsigned long) usig;
+
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		/* Need extra arguments, so mark to restore caller-saves. */
+		regs->regs[1] = ptr_to_compat_reg(&frame->info);
+		regs->regs[2] = ptr_to_compat_reg(&frame->uc);
+		regs->flags |= PT_FLAGS_CALLER_SAVES;
+	}
+
+	/*
+	 * Notify any tracer that was single-stepping it.
+	 * The tracer may want to single-step inside the
+	 * handler too.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+	return 0;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+	return -EFAULT;
+}
diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c
new file mode 100644
index 00000000000..2c54fd43a8a
--- /dev/null
+++ b/arch/tile/kernel/early_printk.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/setup.h>
+#include <hv/hypervisor.h>
+
+static void early_hv_write(struct console *con, const char *s, unsigned n)
+{
+	hv_console_write((HV_VirtAddr) s, n);
+}
+
+static struct console early_hv_console = {
+	.name =		"earlyhv",
+	.write =	early_hv_write,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+/* Direct interface for emergencies */
+static struct console *early_console = &early_hv_console;
+static int early_console_initialized;
+static int early_console_complete;
+
+static void early_vprintk(const char *fmt, va_list ap)
+{
+	char buf[512];
+	int n = vscnprintf(buf, sizeof(buf), fmt, ap);
+	early_console->write(early_console, buf, n);
+}
+
+void early_printk(const char *fmt, ...)
+{
+	va_list ap;
+	va_start(ap, fmt);
+	early_vprintk(fmt, ap);
+	va_end(ap);
+}
+
+void early_panic(const char *fmt, ...)
+{
+	va_list ap;
+	raw_local_irq_disable_all();
+	va_start(ap, fmt);
+	early_printk("Kernel panic - not syncing: ");
+	early_vprintk(fmt, ap);
+	early_console->write(early_console, "\n", 1);
+	va_end(ap);
+	dump_stack();
+	hv_halt();
+}
+
+static int __initdata keep_early;
+
+static int __init setup_early_printk(char *str)
+{
+	if (early_console_initialized)
+		return 1;
+
+	if (str != NULL && strncmp(str, "keep", 4) == 0)
+		keep_early = 1;
+
+	early_console = &early_hv_console;
+	early_console_initialized = 1;
+	register_console(early_console);
+
+	return 0;
+}
+
+void __init disable_early_printk(void)
+{
+	early_console_complete = 1;
+	if (!early_console_initialized || !early_console)
+		return;
+	if (!keep_early) {
+		early_printk("disabling early console\n");
+		unregister_console(early_console);
+		early_console_initialized = 0;
+	} else {
+		early_printk("keeping early console\n");
+	}
+}
+
+void warn_early_printk(void)
+{
+	if (early_console_complete || early_console_initialized)
+		return;
+	early_printk("\
+Machine shutting down before console output is fully initialized.\n\
+You may wish to reboot and add the option 'earlyprintk' to your\n\
+boot command line to see any diagnostic early console output.\n\
+");
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
new file mode 100644
index 00000000000..3d01383b1b0
--- /dev/null
+++ b/arch/tile/kernel/entry.S
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/linkage.h>
+#include <linux/unistd.h>
+#include <asm/irqflags.h>
+#include <arch/abi.h>
+
+#ifdef __tilegx__
+#define bnzt bnezt
+#endif
+
+STD_ENTRY(current_text_addr)
+	{ move r0, lr; jrp lr }
+	STD_ENDPROC(current_text_addr)
+
+STD_ENTRY(_sim_syscall)
+	/*
+	 * Wait for r0-r9 to be ready (and lr on the off chance we
+	 * want the syscall to locate its caller), then make a magic
+	 * simulator syscall.
+	 *
+	 * We carefully stall until the registers are readable in case they
+	 * are the target of a slow load, etc. so that tile-sim will
+	 * definitely be able to read all of them inside the magic syscall.
+	 *
+	 * Technically this is wrong for r3-r9 and lr, since an interrupt
+	 * could come in and restore the registers with a slow load right
+	 * before executing the mtspr. We may need to modify tile-sim to
+	 * explicitly stall for this case, but we do not yet have
+	 * a way to implement such a stall.
+	 */
+	{ and zero, lr, r9 ; and zero, r8, r7 }
+	{ and zero, r6, r5 ; and zero, r4, r3 }
+	{ and zero, r2, r1 ; mtspr SIM_CONTROL, r0 }
+	{ jrp lr }
+	STD_ENDPROC(_sim_syscall)
+
+/*
+ * Implement execve().  The i386 code has a note that forking from kernel
+ * space results in no copy on write until the execve, so we should be
+ * careful not to write to the stack here.
+ */
+STD_ENTRY(kernel_execve)
+	moveli TREG_SYSCALL_NR_NAME, __NR_execve
+	swint1
+	jrp lr
+	STD_ENDPROC(kernel_execve)
+
+/* Delay a fixed number of cycles. */
+STD_ENTRY(__delay)
+	{ addi r0, r0, -1; bnzt r0, . }
+	jrp lr
+	STD_ENDPROC(__delay)
+
+/*
+ * We don't run this function directly, but instead copy it to a page
+ * we map into every user process.  See vdso_setup().
+ *
+ * Note that libc has a copy of this function that it uses to compare
+ * against the PC when a stack backtrace ends, so if this code is
+ * changed, the libc implementation(s) should also be updated.
+ */
+	.pushsection .data
+ENTRY(__rt_sigreturn)
+	moveli TREG_SYSCALL_NR_NAME,__NR_rt_sigreturn
+	swint1
+	ENDPROC(__rt_sigreturn)
+	ENTRY(__rt_sigreturn_end)
+	.popsection
+
+STD_ENTRY(dump_stack)
+	{ move r2, lr; lnk r1 }
+	{ move r4, r52; addli r1, r1, dump_stack - . }
+	{ move r3, sp; j _dump_stack }
+	jrp lr   /* keep backtracer happy */
+	STD_ENDPROC(dump_stack)
+
+STD_ENTRY(KBacktraceIterator_init_current)
+	{ move r2, lr; lnk r1 }
+	{ move r4, r52; addli r1, r1, KBacktraceIterator_init_current - . }
+	{ move r3, sp; j _KBacktraceIterator_init_current }
+	jrp lr   /* keep backtracer happy */
+	STD_ENDPROC(KBacktraceIterator_init_current)
+
+/*
+ * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
+ * free the old stack (passed in r0) and re-invoke cpu_idle().
+ * We update sp and ksp0 simultaneously to avoid backtracer warnings.
+ */
+STD_ENTRY(cpu_idle_on_new_stack)
+	{
+	 move sp, r1
+	 mtspr SYSTEM_SAVE_1_0, r2
+	}
+	jal free_thread_info
+	j cpu_idle
+	STD_ENDPROC(cpu_idle_on_new_stack)
+
+/* Loop forever on a nap during SMP boot. */
+STD_ENTRY(smp_nap)
+	nap
+	j smp_nap /* we are not architecturally guaranteed not to exit nap */
+	jrp lr    /* clue in the backtracer */
+	STD_ENDPROC(smp_nap)
+
+/*
+ * Enable interrupts racelessly and then nap until interrupted.
+ * This function's _cpu_idle_nap address is special; see intvec.S.
+ * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and
+ * as a result return to the function that called _cpu_idle().
+ */
+STD_ENTRY(_cpu_idle)
+	{
+	 lnk r0
+	 movei r1, 1
+	}
+	{
+	 addli r0, r0, _cpu_idle_nap - .
+	 mtspr INTERRUPT_CRITICAL_SECTION, r1
+	}
+	IRQ_ENABLE(r2, r3)         /* unmask, but still with ICS set */
+	mtspr EX_CONTEXT_1_1, r1   /* PL1, ICS clear */
+	mtspr EX_CONTEXT_1_0, r0
+	iret
+	.global _cpu_idle_nap
+_cpu_idle_nap:
+	nap
+	jrp lr
+	STD_ENDPROC(_cpu_idle)
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
new file mode 100644
index 00000000000..584b965dc82
--- /dev/null
+++ b/arch/tile/kernel/hardwall.c
@@ -0,0 +1,796 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/rwsem.h>
+#include <linux/kprobes.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+#include <linux/uaccess.h>
+#include <linux/smp.h>
+#include <linux/cdev.h>
+#include <linux/compat.h>
+#include <asm/hardwall.h>
+#include <asm/traps.h>
+#include <asm/siginfo.h>
+#include <asm/irq_regs.h>
+
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+
+/*
+ * This data structure tracks the rectangle data, etc., associated
+ * one-to-one with a "struct file *" from opening HARDWALL_FILE.
+ * Note that the file's private data points back to this structure.
+ */
+struct hardwall_info {
+	struct list_head list;             /* "rectangles" list */
+	struct list_head task_head;        /* head of tasks in this hardwall */
+	int ulhc_x;                        /* upper left hand corner x coord */
+	int ulhc_y;                        /* upper left hand corner y coord */
+	int width;                         /* rectangle width */
+	int height;                        /* rectangle height */
+	int teardown_in_progress;          /* are we tearing this one down? */
+};
+
+/* Currently allocated hardwall rectangles */
+static LIST_HEAD(rectangles);
+
+/*
+ * Guard changes to the hardwall data structures.
+ * This could be finer grained (e.g. one lock for the list of hardwall
+ * rectangles, then separate embedded locks for each one's list of tasks),
+ * but there are subtle correctness issues when trying to start with
+ * a task's "hardwall" pointer and lock the correct rectangle's embedded
+ * lock in the presence of a simultaneous deactivation, so it seems
+ * easier to have a single lock, given that none of these data
+ * structures are touched very frequently during normal operation.
+ */
+static DEFINE_SPINLOCK(hardwall_lock);
+
+/* Allow disabling UDN access. */
+static int udn_disabled;
+static int __init noudn(char *str)
+{
+	pr_info("User-space UDN access is disabled\n");
+	udn_disabled = 1;
+	return 0;
+}
+early_param("noudn", noudn);
+
+
+/*
+ * Low-level primitives
+ */
+
+/* Set a CPU bit if the CPU is online. */
+#define cpu_online_set(cpu, dst) do { \
+	if (cpu_online(cpu))          \
+		cpumask_set_cpu(cpu, dst);    \
+} while (0)
+
+
+/* Does the given rectangle contain the given x,y coordinate? */
+static int contains(struct hardwall_info *r, int x, int y)
+{
+	return (x >= r->ulhc_x && x < r->ulhc_x + r->width) &&
+		(y >= r->ulhc_y && y < r->ulhc_y + r->height);
+}
+
+/* Compute the rectangle parameters and validate the cpumask. */
+static int setup_rectangle(struct hardwall_info *r, struct cpumask *mask)
+{
+	int x, y, cpu, ulhc, lrhc;
+
+	/* The first cpu is the ULHC, the last the LRHC. */
+	ulhc = find_first_bit(cpumask_bits(mask), nr_cpumask_bits);
+	lrhc = find_last_bit(cpumask_bits(mask), nr_cpumask_bits);
+
+	/* Compute the rectangle attributes from the cpus. */
+	r->ulhc_x = cpu_x(ulhc);
+	r->ulhc_y = cpu_y(ulhc);
+	r->width = cpu_x(lrhc) - r->ulhc_x + 1;
+	r->height = cpu_y(lrhc) - r->ulhc_y + 1;
+
+	/* Width and height must be positive */
+	if (r->width <= 0 || r->height <= 0)
+		return -EINVAL;
+
+	/* Confirm that the cpumask is exactly the rectangle. */
+	for (y = 0, cpu = 0; y < smp_height; ++y)
+		for (x = 0; x < smp_width; ++x, ++cpu)
+			if (cpumask_test_cpu(cpu, mask) != contains(r, x, y))
+				return -EINVAL;
+
+	/*
+	 * Note that offline cpus can't be drained when this UDN
+	 * rectangle eventually closes.  We used to detect this
+	 * situation and print a warning, but it annoyed users and
+	 * they ignored it anyway, so now we just return without a
+	 * warning.
+	 */
+	return 0;
+}
+
+/* Do the two given rectangles overlap on any cpu? */
+static int overlaps(struct hardwall_info *a, struct hardwall_info *b)
+{
+	return a->ulhc_x + a->width > b->ulhc_x &&    /* A not to the left */
+		b->ulhc_x + b->width > a->ulhc_x &&   /* B not to the left */
+		a->ulhc_y + a->height > b->ulhc_y &&  /* A not above */
+		b->ulhc_y + b->height > a->ulhc_y;    /* B not above */
+}
+
+
+/*
+ * Hardware management of hardwall setup, teardown, trapping,
+ * and enabling/disabling PL0 access to the networks.
+ */
+
+/* Bit field values to mask together for writes to SPR_XDN_DIRECTION_PROTECT */
+enum direction_protect {
+	N_PROTECT = (1 << 0),
+	E_PROTECT = (1 << 1),
+	S_PROTECT = (1 << 2),
+	W_PROTECT = (1 << 3)
+};
+
+static void enable_firewall_interrupts(void)
+{
+	raw_local_irq_unmask_now(INT_UDN_FIREWALL);
+}
+
+static void disable_firewall_interrupts(void)
+{
+	raw_local_irq_mask_now(INT_UDN_FIREWALL);
+}
+
+/* Set up hardwall on this cpu based on the passed hardwall_info. */
+static void hardwall_setup_ipi_func(void *info)
+{
+	struct hardwall_info *r = info;
+	int cpu = smp_processor_id();
+	int x = cpu % smp_width;
+	int y = cpu / smp_width;
+	int bits = 0;
+	if (x == r->ulhc_x)
+		bits |= W_PROTECT;
+	if (x == r->ulhc_x + r->width - 1)
+		bits |= E_PROTECT;
+	if (y == r->ulhc_y)
+		bits |= N_PROTECT;
+	if (y == r->ulhc_y + r->height - 1)
+		bits |= S_PROTECT;
+	BUG_ON(bits == 0);
+	__insn_mtspr(SPR_UDN_DIRECTION_PROTECT, bits);
+	enable_firewall_interrupts();
+
+}
+
+/* Set up all cpus on edge of rectangle to enable/disable hardwall SPRs. */
+static void hardwall_setup(struct hardwall_info *r)
+{
+	int x, y, cpu, delta;
+	struct cpumask rect_cpus;
+
+	cpumask_clear(&rect_cpus);
+
+	/* First include the top and bottom edges */
+	cpu = r->ulhc_y * smp_width + r->ulhc_x;
+	delta = (r->height - 1) * smp_width;
+	for (x = 0; x < r->width; ++x, ++cpu) {
+		cpu_online_set(cpu, &rect_cpus);
+		cpu_online_set(cpu + delta, &rect_cpus);
+	}
+
+	/* Then the left and right edges */
+	cpu -= r->width;
+	delta = r->width - 1;
+	for (y = 0; y < r->height; ++y, cpu += smp_width) {
+		cpu_online_set(cpu, &rect_cpus);
+		cpu_online_set(cpu + delta, &rect_cpus);
+	}
+
+	/* Then tell all the cpus to set up their protection SPR */
+	on_each_cpu_mask(&rect_cpus, hardwall_setup_ipi_func, r, 1);
+}
+
+void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
+{
+	struct hardwall_info *rect;
+	struct task_struct *p;
+	struct siginfo info;
+	int x, y;
+	int cpu = smp_processor_id();
+	int found_processes;
+	unsigned long flags;
+
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	irq_enter();
+
+	/* This tile trapped a network access; find the rectangle. */
+	x = cpu % smp_width;
+	y = cpu / smp_width;
+	spin_lock_irqsave(&hardwall_lock, flags);
+	list_for_each_entry(rect, &rectangles, list) {
+		if (contains(rect, x, y))
+			break;
+	}
+
+	/*
+	 * It shouldn't be possible not to find this cpu on the
+	 * rectangle list, since only cpus in rectangles get hardwalled.
+	 * The hardwall is only removed after the UDN is drained.
+	 */
+	BUG_ON(&rect->list == &rectangles);
+
+	/*
+	 * If we already started teardown on this hardwall, don't worry;
+	 * the abort signal has been sent and we are just waiting for things
+	 * to quiesce.
+	 */
+	if (rect->teardown_in_progress) {
+		pr_notice("cpu %d: detected hardwall violation %#lx"
+		       " while teardown already in progress\n",
+		       cpu, (long) __insn_mfspr(SPR_UDN_DIRECTION_PROTECT));
+		goto done;
+	}
+
+	/*
+	 * Kill off any process that is activated in this rectangle.
+	 * We bypass security to deliver the signal, since it must be
+	 * one of the activated processes that generated the UDN
+	 * message that caused this trap, and all the activated
+	 * processes shared a single open file so are pretty tightly
+	 * bound together from a security point of view to begin with.
+	 */
+	rect->teardown_in_progress = 1;
+	wmb(); /* Ensure visibility of rectangle before notifying processes. */
+	pr_notice("cpu %d: detected hardwall violation %#lx...\n",
+	       cpu, (long) __insn_mfspr(SPR_UDN_DIRECTION_PROTECT));
+	info.si_signo = SIGILL;
+	info.si_errno = 0;
+	info.si_code = ILL_HARDWALL;
+	found_processes = 0;
+	list_for_each_entry(p, &rect->task_head, thread.hardwall_list) {
+		BUG_ON(p->thread.hardwall != rect);
+		if (p->sighand) {
+			found_processes = 1;
+			pr_notice("hardwall: killing %d\n", p->pid);
+			spin_lock(&p->sighand->siglock);
+			__group_send_sig_info(info.si_signo, &info, p);
+			spin_unlock(&p->sighand->siglock);
+		}
+	}
+	if (!found_processes)
+		pr_notice("hardwall: no associated processes!\n");
+
+ done:
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+
+	/*
+	 * We have to disable firewall interrupts now, or else when we
+	 * return from this handler, we will simply re-interrupt back to
+	 * it.  However, we can't clear the protection bits, since we
+	 * haven't yet drained the network, and that would allow packets
+	 * to cross out of the hardwall region.
+	 */
+	disable_firewall_interrupts();
+
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+/* Allow access from user space to the UDN. */
+void grant_network_mpls(void)
+{
+	__insn_mtspr(SPR_MPL_UDN_ACCESS_SET_0, 1);
+	__insn_mtspr(SPR_MPL_UDN_AVAIL_SET_0, 1);
+	__insn_mtspr(SPR_MPL_UDN_COMPLETE_SET_0, 1);
+	__insn_mtspr(SPR_MPL_UDN_TIMER_SET_0, 1);
+#if !CHIP_HAS_REV1_XDN()
+	__insn_mtspr(SPR_MPL_UDN_REFILL_SET_0, 1);
+	__insn_mtspr(SPR_MPL_UDN_CA_SET_0, 1);
+#endif
+}
+
+/* Deny access from user space to the UDN. */
+void restrict_network_mpls(void)
+{
+	__insn_mtspr(SPR_MPL_UDN_ACCESS_SET_1, 1);
+	__insn_mtspr(SPR_MPL_UDN_AVAIL_SET_1, 1);
+	__insn_mtspr(SPR_MPL_UDN_COMPLETE_SET_1, 1);
+	__insn_mtspr(SPR_MPL_UDN_TIMER_SET_1, 1);
+#if !CHIP_HAS_REV1_XDN()
+	__insn_mtspr(SPR_MPL_UDN_REFILL_SET_1, 1);
+	__insn_mtspr(SPR_MPL_UDN_CA_SET_1, 1);
+#endif
+}
+
+
+/*
+ * Code to create, activate, deactivate, and destroy hardwall rectangles.
+ */
+
+/* Create a hardwall for the given rectangle */
+static struct hardwall_info *hardwall_create(
+	size_t size, const unsigned char __user *bits)
+{
+	struct hardwall_info *iter, *rect;
+	struct cpumask mask;
+	unsigned long flags;
+	int rc;
+
+	/* Reject crazy sizes out of hand, a la sys_mbind(). */
+	if (size > PAGE_SIZE)
+		return ERR_PTR(-EINVAL);
+
+	/* Copy whatever fits into a cpumask. */
+	if (copy_from_user(&mask, bits, min(sizeof(struct cpumask), size)))
+		return ERR_PTR(-EFAULT);
+
+	/*
+	 * If the size was short, clear the rest of the mask;
+	 * otherwise validate that the rest of the user mask was zero
+	 * (we don't try hard to be efficient when validating huge masks).
+	 */
+	if (size < sizeof(struct cpumask)) {
+		memset((char *)&mask + size, 0, sizeof(struct cpumask) - size);
+	} else if (size > sizeof(struct cpumask)) {
+		size_t i;
+		for (i = sizeof(struct cpumask); i < size; ++i) {
+			char c;
+			if (get_user(c, &bits[i]))
+				return ERR_PTR(-EFAULT);
+			if (c)
+				return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/* Allocate a new rectangle optimistically. */
+	rect = kmalloc(sizeof(struct hardwall_info),
+			GFP_KERNEL | __GFP_ZERO);
+	if (rect == NULL)
+		return ERR_PTR(-ENOMEM);
+	INIT_LIST_HEAD(&rect->task_head);
+
+	/* Compute the rectangle size and validate that it's plausible. */
+	rc = setup_rectangle(rect, &mask);
+	if (rc != 0) {
+		kfree(rect);
+		return ERR_PTR(rc);
+	}
+
+	/* Confirm it doesn't overlap and add it to the list. */
+	spin_lock_irqsave(&hardwall_lock, flags);
+	list_for_each_entry(iter, &rectangles, list) {
+		if (overlaps(iter, rect)) {
+			spin_unlock_irqrestore(&hardwall_lock, flags);
+			kfree(rect);
+			return ERR_PTR(-EBUSY);
+		}
+	}
+	list_add_tail(&rect->list, &rectangles);
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+
+	/* Set up appropriate hardwalling on all affected cpus. */
+	hardwall_setup(rect);
+
+	return rect;
+}
+
+/* Activate a given hardwall on this cpu for this process. */
+static int hardwall_activate(struct hardwall_info *rect)
+{
+	int cpu, x, y;
+	unsigned long flags;
+	struct task_struct *p = current;
+	struct thread_struct *ts = &p->thread;
+
+	/* Require a rectangle. */
+	if (rect == NULL)
+		return -ENODATA;
+
+	/* Not allowed to activate a rectangle that is being torn down. */
+	if (rect->teardown_in_progress)
+		return -EINVAL;
+
+	/*
+	 * Get our affinity; if we're not bound to this tile uniquely,
+	 * we can't access the network registers.
+	 */
+	if (cpumask_weight(&p->cpus_allowed) != 1)
+		return -EPERM;
+
+	/* Make sure we are bound to a cpu in this rectangle. */
+	cpu = smp_processor_id();
+	BUG_ON(cpumask_first(&p->cpus_allowed) != cpu);
+	x = cpu_x(cpu);
+	y = cpu_y(cpu);
+	if (!contains(rect, x, y))
+		return -EINVAL;
+
+	/* If we are already bound to this hardwall, it's a no-op. */
+	if (ts->hardwall) {
+		BUG_ON(ts->hardwall != rect);
+		return 0;
+	}
+
+	/* Success!  This process gets to use the user networks on this cpu. */
+	ts->hardwall = rect;
+	spin_lock_irqsave(&hardwall_lock, flags);
+	list_add(&ts->hardwall_list, &rect->task_head);
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+	grant_network_mpls();
+	printk(KERN_DEBUG "Pid %d (%s) activated for hardwall: cpu %d\n",
+	       p->pid, p->comm, cpu);
+	return 0;
+}
+
+/*
+ * Deactivate a task's hardwall.  Must hold hardwall_lock.
+ * This method may be called from free_task(), so we don't want to
+ * rely on too many fields of struct task_struct still being valid.
+ * We assume the cpus_allowed, pid, and comm fields are still valid.
+ */
+static void _hardwall_deactivate(struct task_struct *task)
+{
+	struct thread_struct *ts = &task->thread;
+
+	if (cpumask_weight(&task->cpus_allowed) != 1) {
+		pr_err("pid %d (%s) releasing networks with"
+		       " an affinity mask containing %d cpus!\n",
+		       task->pid, task->comm,
+		       cpumask_weight(&task->cpus_allowed));
+		BUG();
+	}
+
+	BUG_ON(ts->hardwall == NULL);
+	ts->hardwall = NULL;
+	list_del(&ts->hardwall_list);
+	if (task == current)
+		restrict_network_mpls();
+}
+
+/* Deactivate a task's hardwall. */
+int hardwall_deactivate(struct task_struct *task)
+{
+	unsigned long flags;
+	int activated;
+
+	spin_lock_irqsave(&hardwall_lock, flags);
+	activated = (task->thread.hardwall != NULL);
+	if (activated)
+		_hardwall_deactivate(task);
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+
+	if (!activated)
+		return -EINVAL;
+
+	printk(KERN_DEBUG "Pid %d (%s) deactivated for hardwall: cpu %d\n",
+	       task->pid, task->comm, smp_processor_id());
+	return 0;
+}
+
+/* Stop a UDN switch before draining the network. */
+static void stop_udn_switch(void *ignored)
+{
+#if !CHIP_HAS_REV1_XDN()
+	/* Freeze the switch and the demux. */
+	__insn_mtspr(SPR_UDN_SP_FREEZE,
+		     SPR_UDN_SP_FREEZE__SP_FRZ_MASK |
+		     SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK |
+		     SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK);
+#endif
+}
+
+/* Drain all the state from a stopped switch. */
+static void drain_udn_switch(void *ignored)
+{
+#if !CHIP_HAS_REV1_XDN()
+	int i;
+	int from_tile_words, ca_count;
+
+	/* Empty out the 5 switch point fifos. */
+	for (i = 0; i < 5; i++) {
+		int words, j;
+		__insn_mtspr(SPR_UDN_SP_FIFO_SEL, i);
+		words = __insn_mfspr(SPR_UDN_SP_STATE) & 0xF;
+		for (j = 0; j < words; j++)
+			(void) __insn_mfspr(SPR_UDN_SP_FIFO_DATA);
+		BUG_ON((__insn_mfspr(SPR_UDN_SP_STATE) & 0xF) != 0);
+	}
+
+	/* Dump out the 3 word fifo at top. */
+	from_tile_words = (__insn_mfspr(SPR_UDN_DEMUX_STATUS) >> 10) & 0x3;
+	for (i = 0; i < from_tile_words; i++)
+		(void) __insn_mfspr(SPR_UDN_DEMUX_WRITE_FIFO);
+
+	/* Empty out demuxes. */
+	while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 0))
+		(void) __tile_udn0_receive();
+	while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 1))
+		(void) __tile_udn1_receive();
+	while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 2))
+		(void) __tile_udn2_receive();
+	while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 3))
+		(void) __tile_udn3_receive();
+	BUG_ON((__insn_mfspr(SPR_UDN_DATA_AVAIL) & 0xF) != 0);
+
+	/* Empty out catch all. */
+	ca_count = __insn_mfspr(SPR_UDN_DEMUX_CA_COUNT);
+	for (i = 0; i < ca_count; i++)
+		(void) __insn_mfspr(SPR_UDN_CA_DATA);
+	BUG_ON(__insn_mfspr(SPR_UDN_DEMUX_CA_COUNT) != 0);
+
+	/* Clear demux logic. */
+	__insn_mtspr(SPR_UDN_DEMUX_CTL, 1);
+
+	/*
+	 * Write switch state; experimentation indicates that 0xc3000
+	 * is an idle switch point.
+	 */
+	for (i = 0; i < 5; i++) {
+		__insn_mtspr(SPR_UDN_SP_FIFO_SEL, i);
+		__insn_mtspr(SPR_UDN_SP_STATE, 0xc3000);
+	}
+#endif
+}
+
+/* Reset random UDN state registers at boot up and during hardwall teardown. */
+void reset_network_state(void)
+{
+#if !CHIP_HAS_REV1_XDN()
+	/* Reset UDN coordinates to their standard value */
+	unsigned int cpu = smp_processor_id();
+	unsigned int x = cpu % smp_width;
+	unsigned int y = cpu / smp_width;
+#endif
+
+	if (udn_disabled)
+		return;
+
+#if !CHIP_HAS_REV1_XDN()
+	__insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7));
+
+	/* Set demux tags to predefined values and enable them. */
+	__insn_mtspr(SPR_UDN_TAG_VALID, 0xf);
+	__insn_mtspr(SPR_UDN_TAG_0, (1 << 0));
+	__insn_mtspr(SPR_UDN_TAG_1, (1 << 1));
+	__insn_mtspr(SPR_UDN_TAG_2, (1 << 2));
+	__insn_mtspr(SPR_UDN_TAG_3, (1 << 3));
+#endif
+
+	/* Clear out other random registers so we have a clean slate. */
+	__insn_mtspr(SPR_UDN_AVAIL_EN, 0);
+	__insn_mtspr(SPR_UDN_DEADLOCK_TIMEOUT, 0);
+#if !CHIP_HAS_REV1_XDN()
+	__insn_mtspr(SPR_UDN_REFILL_EN, 0);
+	__insn_mtspr(SPR_UDN_DEMUX_QUEUE_SEL, 0);
+	__insn_mtspr(SPR_UDN_SP_FIFO_SEL, 0);
+#endif
+
+	/* Start the switch and demux. */
+#if !CHIP_HAS_REV1_XDN()
+	__insn_mtspr(SPR_UDN_SP_FREEZE, 0);
+#endif
+}
+
+/* Restart a UDN switch after draining. */
+static void restart_udn_switch(void *ignored)
+{
+	reset_network_state();
+
+	/* Disable firewall interrupts. */
+	__insn_mtspr(SPR_UDN_DIRECTION_PROTECT, 0);
+	disable_firewall_interrupts();
+}
+
+/* Build a struct cpumask containing all valid tiles in bounding rectangle. */
+static void fill_mask(struct hardwall_info *r, struct cpumask *result)
+{
+	int x, y, cpu;
+
+	cpumask_clear(result);
+
+	cpu = r->ulhc_y * smp_width + r->ulhc_x;
+	for (y = 0; y < r->height; ++y, cpu += smp_width - r->width) {
+		for (x = 0; x < r->width; ++x, ++cpu)
+			cpu_online_set(cpu, result);
+	}
+}
+
+/* Last reference to a hardwall is gone, so clear the network. */
+static void hardwall_destroy(struct hardwall_info *rect)
+{
+	struct task_struct *task;
+	unsigned long flags;
+	struct cpumask mask;
+
+	/* Make sure this file actually represents a rectangle. */
+	if (rect == NULL)
+		return;
+
+	/*
+	 * Deactivate any remaining tasks.  It's possible to race with
+	 * some other thread that is exiting and hasn't yet called
+	 * deactivate (when freeing its thread_info), so we carefully
+	 * deactivate any remaining tasks before freeing the
+	 * hardwall_info object itself.
+	 */
+	spin_lock_irqsave(&hardwall_lock, flags);
+	list_for_each_entry(task, &rect->task_head, thread.hardwall_list)
+		_hardwall_deactivate(task);
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+
+	/* Drain the UDN. */
+	printk(KERN_DEBUG "Clearing hardwall rectangle %dx%d %d,%d\n",
+	       rect->width, rect->height, rect->ulhc_x, rect->ulhc_y);
+	fill_mask(rect, &mask);
+	on_each_cpu_mask(&mask, stop_udn_switch, NULL, 1);
+	on_each_cpu_mask(&mask, drain_udn_switch, NULL, 1);
+
+	/* Restart switch and disable firewall. */
+	on_each_cpu_mask(&mask, restart_udn_switch, NULL, 1);
+
+	/* Now free the rectangle from the list. */
+	spin_lock_irqsave(&hardwall_lock, flags);
+	BUG_ON(!list_empty(&rect->task_head));
+	list_del(&rect->list);
+	spin_unlock_irqrestore(&hardwall_lock, flags);
+	kfree(rect);
+}
+
+
+/*
+ * Dump hardwall state via /proc; initialized in arch/tile/sys/proc.c.
+ */
+int proc_tile_hardwall_show(struct seq_file *sf, void *v)
+{
+	struct hardwall_info *r;
+
+	if (udn_disabled) {
+		seq_printf(sf, "%dx%d 0,0 pids:\n", smp_width, smp_height);
+		return 0;
+	}
+
+	spin_lock_irq(&hardwall_lock);
+	list_for_each_entry(r, &rectangles, list) {
+		struct task_struct *p;
+		seq_printf(sf, "%dx%d %d,%d pids:",
+			   r->width, r->height, r->ulhc_x, r->ulhc_y);
+		list_for_each_entry(p, &r->task_head, thread.hardwall_list) {
+			unsigned int cpu = cpumask_first(&p->cpus_allowed);
+			unsigned int x = cpu % smp_width;
+			unsigned int y = cpu / smp_width;
+			seq_printf(sf, " %d@%d,%d", p->pid, x, y);
+		}
+		seq_printf(sf, "\n");
+	}
+	spin_unlock_irq(&hardwall_lock);
+	return 0;
+}
+
+
+/*
+ * Character device support via ioctl/close.
+ */
+
+static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b)
+{
+	struct hardwall_info *rect = file->private_data;
+
+	if (_IOC_TYPE(a) != HARDWALL_IOCTL_BASE)
+		return -EINVAL;
+
+	switch (_IOC_NR(a)) {
+	case _HARDWALL_CREATE:
+		if (udn_disabled)
+			return -ENOSYS;
+		if (rect != NULL)
+			return -EALREADY;
+		rect = hardwall_create(_IOC_SIZE(a),
+					(const unsigned char __user *)b);
+		if (IS_ERR(rect))
+			return PTR_ERR(rect);
+		file->private_data = rect;
+		return 0;
+
+	case _HARDWALL_ACTIVATE:
+		return hardwall_activate(rect);
+
+	case _HARDWALL_DEACTIVATE:
+		if (current->thread.hardwall != rect)
+			return -EINVAL;
+		return hardwall_deactivate(current);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long hardwall_compat_ioctl(struct file *file,
+				  unsigned int a, unsigned long b)
+{
+	/* Sign-extend the argument so it can be used as a pointer. */
+	return hardwall_ioctl(file, a, (unsigned long)compat_ptr(b));
+}
+#endif
+
+/* The user process closed the file; revoke access to user networks. */
+static int hardwall_flush(struct file *file, fl_owner_t owner)
+{
+	struct hardwall_info *rect = file->private_data;
+	struct task_struct *task, *tmp;
+	unsigned long flags;
+
+	if (rect) {
+		/*
+		 * NOTE: if multiple threads are activated on this hardwall
+		 * file, the other threads will continue having access to the
+		 * UDN until they are context-switched out and back in again.
+		 *
+		 * NOTE: A NULL files pointer means the task is being torn
+		 * down, so in that case we also deactivate it.
+		 */
+		spin_lock_irqsave(&hardwall_lock, flags);
+		list_for_each_entry_safe(task, tmp, &rect->task_head,
+					 thread.hardwall_list) {
+			if (task->files == owner || task->files == NULL)
+				_hardwall_deactivate(task);
+		}
+		spin_unlock_irqrestore(&hardwall_lock, flags);
+	}
+
+	return 0;
+}
+
+/* This hardwall is gone, so destroy it. */
+static int hardwall_release(struct inode *inode, struct file *file)
+{
+	hardwall_destroy(file->private_data);
+	return 0;
+}
+
+static const struct file_operations dev_hardwall_fops = {
+	.unlocked_ioctl = hardwall_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl   = hardwall_compat_ioctl,
+#endif
+	.flush          = hardwall_flush,
+	.release        = hardwall_release,
+};
+
+static struct cdev hardwall_dev;
+
+static int __init dev_hardwall_init(void)
+{
+	int rc;
+	dev_t dev;
+
+	rc = alloc_chrdev_region(&dev, 0, 1, "hardwall");
+	if (rc < 0)
+		return rc;
+	cdev_init(&hardwall_dev, &dev_hardwall_fops);
+	rc = cdev_add(&hardwall_dev, dev, 1);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+late_initcall(dev_hardwall_init);
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
new file mode 100644
index 00000000000..2b4f6c09170
--- /dev/null
+++ b/arch/tile/kernel/head_32.S
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE startup code.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ */
+
+	__HEAD
+ENTRY(_start)
+	/* Notify the hypervisor of what version of the API we want */
+	{
+	  movei r1, TILE_CHIP
+	  movei r2, TILE_CHIP_REV
+	}
+	{
+	  moveli r0, _HV_VERSION
+	  jal hv_init
+	}
+	/* Get a reasonable default ASID in r0 */
+	{
+	  move r0, zero
+	  jal hv_inquire_asid
+	}
+	/* Install the default page table */
+	{
+	  moveli r6, lo16(swapper_pgprot - PAGE_OFFSET)
+	  move r4, r0     /* use starting ASID of range for this page table */
+	}
+	{
+	  moveli r0, lo16(swapper_pg_dir - PAGE_OFFSET)
+	  auli r6, r6, ha16(swapper_pgprot - PAGE_OFFSET)
+	}
+	{
+	  lw r2, r6
+	  addi r6, r6, 4
+	}
+	{
+	  lw r3, r6
+	  auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET)
+	}
+	{
+	  inv r6
+	  move r1, zero   /* high 32 bits of CPA is zero */
+	}
+	{
+	  moveli lr, lo16(1f)
+	  move r5, zero
+	}
+	{
+	  auli lr, lr, ha16(1f)
+	  j hv_install_context
+	}
+1:
+
+	/* Get our processor number and save it away in SAVE_1_0. */
+	jal hv_inquire_topology
+	mulll_uu r4, r1, r2        /* r1 == y, r2 == width */
+	add r4, r4, r0             /* r0 == x, so r4 == cpu == y*width + x */
+
+#ifdef CONFIG_SMP
+	/*
+	 * Load up our per-cpu offset.  When the first (master) tile
+	 * boots, this value is still zero, so we will load boot_pc
+	 * with start_kernel, and boot_sp with init_stack + THREAD_SIZE.
+	 * The master tile initializes the per-cpu offset array, so that
+	 * when subsequent (secondary) tiles boot, they will instead load
+	 * from their per-cpu versions of boot_sp and boot_pc.
+	 */
+	moveli r5, lo16(__per_cpu_offset)
+	auli r5, r5, ha16(__per_cpu_offset)
+	s2a r5, r4, r5
+	lw r5, r5
+	bnz r5, 1f
+
+	/*
+	 * Save the width and height to the smp_topology variable
+	 * for later use.
+	 */
+	moveli r0, lo16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+	auli r0, r0, ha16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+	{
+	  sw r0, r2
+	  addi r0, r0, (HV_TOPOLOGY_HEIGHT_OFFSET - HV_TOPOLOGY_WIDTH_OFFSET)
+	}
+	sw r0, r3
+1:
+#else
+	move r5, zero
+#endif
+
+	/* Load and go with the correct pc and sp. */
+	{
+	  addli r1, r5, lo16(boot_sp)
+	  addli r0, r5, lo16(boot_pc)
+	}
+	{
+	  auli r1, r1, ha16(boot_sp)
+	  auli r0, r0, ha16(boot_pc)
+	}
+	lw r0, r0
+	lw sp, r1
+	or r4, sp, r4
+	mtspr SYSTEM_SAVE_1_0, r4  /* save ksp0 + cpu */
+	addi sp, sp, -STACK_TOP_DELTA
+	{
+	  move lr, zero   /* stop backtraces in the called function */
+	  jr r0
+	}
+	ENDPROC(_start)
+
+.section ".bss.page_aligned","w"
+	.align PAGE_SIZE
+ENTRY(empty_zero_page)
+	.fill PAGE_SIZE,1,0
+	END(empty_zero_page)
+
+	.macro PTE va, cpa, bits1, no_org=0
+	.ifeq \no_org
+	.org swapper_pg_dir + HV_L1_INDEX(\va) * HV_PTE_SIZE
+	.endif
+	.word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
+	      (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
+	.word (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
+	.endm
+
+.section ".data.page_aligned","wa"
+	.align PAGE_SIZE
+ENTRY(swapper_pg_dir)
+	/*
+	 * All data pages from PAGE_OFFSET to MEM_USER_INTRPT are mapped as
+	 * VA = PA + PAGE_OFFSET.  We remap things with more precise access
+	 * permissions and more respect for size of RAM later.
+	 */
+	.set addr, 0
+	.rept (MEM_USER_INTRPT - PAGE_OFFSET) >> PGDIR_SHIFT
+	PTE addr + PAGE_OFFSET, addr, HV_PTE_READABLE | HV_PTE_WRITABLE
+	.set addr, addr + PGDIR_SIZE
+	.endr
+
+	/* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
+	PTE MEM_SV_INTRPT, 0, HV_PTE_READABLE | HV_PTE_EXECUTABLE
+	.org swapper_pg_dir + HV_L1_SIZE
+	END(swapper_pg_dir)
+
+	/*
+	 * Isolate swapper_pgprot to its own cache line, since each cpu
+	 * starting up will read it using VA-is-PA and local homing.
+	 * This would otherwise likely conflict with other data on the cache
+	 * line, once we have set its permanent home in the page tables.
+	 */
+	__INITDATA
+	.align CHIP_L2_LINE_SIZE()
+ENTRY(swapper_pgprot)
+	PTE	0, 0, HV_PTE_READABLE | HV_PTE_WRITABLE, 1
+	.align CHIP_L2_LINE_SIZE()
+	END(swapper_pgprot)
diff --git a/arch/tile/kernel/hvglue.lds b/arch/tile/kernel/hvglue.lds
new file mode 100644
index 00000000000..2b7cd0a659a
--- /dev/null
+++ b/arch/tile/kernel/hvglue.lds
@@ -0,0 +1,58 @@
+/* Hypervisor call vector addresses; see <hv/hypervisor.h> */
+hv_init = TEXT_OFFSET + 0x10020;
+hv_install_context = TEXT_OFFSET + 0x10040;
+hv_sysconf = TEXT_OFFSET + 0x10060;
+hv_get_rtc = TEXT_OFFSET + 0x10080;
+hv_set_rtc = TEXT_OFFSET + 0x100a0;
+hv_flush_asid = TEXT_OFFSET + 0x100c0;
+hv_flush_page = TEXT_OFFSET + 0x100e0;
+hv_flush_pages = TEXT_OFFSET + 0x10100;
+hv_restart = TEXT_OFFSET + 0x10120;
+hv_halt = TEXT_OFFSET + 0x10140;
+hv_power_off = TEXT_OFFSET + 0x10160;
+hv_inquire_physical = TEXT_OFFSET + 0x10180;
+hv_inquire_memory_controller = TEXT_OFFSET + 0x101a0;
+hv_inquire_virtual = TEXT_OFFSET + 0x101c0;
+hv_inquire_asid = TEXT_OFFSET + 0x101e0;
+hv_nanosleep = TEXT_OFFSET + 0x10200;
+hv_console_read_if_ready = TEXT_OFFSET + 0x10220;
+hv_console_write = TEXT_OFFSET + 0x10240;
+hv_downcall_dispatch = TEXT_OFFSET + 0x10260;
+hv_inquire_topology = TEXT_OFFSET + 0x10280;
+hv_fs_findfile = TEXT_OFFSET + 0x102a0;
+hv_fs_fstat = TEXT_OFFSET + 0x102c0;
+hv_fs_pread = TEXT_OFFSET + 0x102e0;
+hv_physaddr_read64 = TEXT_OFFSET + 0x10300;
+hv_physaddr_write64 = TEXT_OFFSET + 0x10320;
+hv_get_command_line = TEXT_OFFSET + 0x10340;
+hv_set_caching = TEXT_OFFSET + 0x10360;
+hv_bzero_page = TEXT_OFFSET + 0x10380;
+hv_register_message_state = TEXT_OFFSET + 0x103a0;
+hv_send_message = TEXT_OFFSET + 0x103c0;
+hv_receive_message = TEXT_OFFSET + 0x103e0;
+hv_inquire_context = TEXT_OFFSET + 0x10400;
+hv_start_all_tiles = TEXT_OFFSET + 0x10420;
+hv_dev_open = TEXT_OFFSET + 0x10440;
+hv_dev_close = TEXT_OFFSET + 0x10460;
+hv_dev_pread = TEXT_OFFSET + 0x10480;
+hv_dev_pwrite = TEXT_OFFSET + 0x104a0;
+hv_dev_poll = TEXT_OFFSET + 0x104c0;
+hv_dev_poll_cancel = TEXT_OFFSET + 0x104e0;
+hv_dev_preada = TEXT_OFFSET + 0x10500;
+hv_dev_pwritea = TEXT_OFFSET + 0x10520;
+hv_flush_remote = TEXT_OFFSET + 0x10540;
+hv_console_putc = TEXT_OFFSET + 0x10560;
+hv_inquire_tiles = TEXT_OFFSET + 0x10580;
+hv_confstr = TEXT_OFFSET + 0x105a0;
+hv_reexec = TEXT_OFFSET + 0x105c0;
+hv_set_command_line = TEXT_OFFSET + 0x105e0;
+hv_clear_intr = TEXT_OFFSET + 0x10600;
+hv_enable_intr = TEXT_OFFSET + 0x10620;
+hv_disable_intr = TEXT_OFFSET + 0x10640;
+hv_raise_intr = TEXT_OFFSET + 0x10660;
+hv_trigger_ipi = TEXT_OFFSET + 0x10680;
+hv_store_mapping = TEXT_OFFSET + 0x106a0;
+hv_inquire_realpa = TEXT_OFFSET + 0x106c0;
+hv_flush_all = TEXT_OFFSET + 0x106e0;
+hv_get_ipi_pte = TEXT_OFFSET + 0x10700;
+hv_glue_internals = TEXT_OFFSET + 0x10720;
diff --git a/arch/tile/kernel/init_task.c b/arch/tile/kernel/init_task.c
new file mode 100644
index 00000000000..928b3187066
--- /dev/null
+++ b/arch/tile/kernel/init_task.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/module.h>
+#include <linux/start_kernel.h>
+#include <linux/uaccess.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union __init_task_data = {
+	INIT_THREAD_INFO(init_task)
+};
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/*
+ * per-CPU stack and boot info.
+ */
+DEFINE_PER_CPU(unsigned long, boot_sp) =
+	(unsigned long)init_stack + THREAD_SIZE;
+
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(unsigned long, boot_pc) = (unsigned long)start_kernel;
+#else
+/*
+ * The variable must be __initdata since it references __init code.
+ * With CONFIG_SMP it is per-cpu data, which is exempt from validation.
+ */
+unsigned long __initdata boot_pc = (unsigned long)start_kernel;
+#endif
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
new file mode 100644
index 00000000000..3404c75f8e6
--- /dev/null
+++ b/arch/tile/kernel/intvec_32.S
@@ -0,0 +1,2008 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Linux interrupt vectors.
+ */
+
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/unistd.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/atomic.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+#include <arch/abi.h>
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+#ifdef CONFIG_PREEMPT
+# error "No support for kernel preemption currently"
+#endif
+
+#if INT_INTCTRL_1 < 32 || INT_INTCTRL_1 >= 48
+# error INT_INTCTRL_1 coded to set high interrupt mask
+#endif
+
+#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
+
+#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)
+
+#if !CHIP_HAS_WH64()
+	/* By making this an empty macro, we can use wh64 in the code. */
+	.macro  wh64 reg
+	.endm
+#endif
+
+	.macro  push_reg reg, ptr=sp, delta=-4
+	{
+	 sw     \ptr, \reg
+	 addli  \ptr, \ptr, \delta
+	}
+	.endm
+
+	.macro  pop_reg reg, ptr=sp, delta=4
+	{
+	 lw     \reg, \ptr
+	 addli  \ptr, \ptr, \delta
+	}
+	.endm
+
+	.macro  pop_reg_zero reg, zreg, ptr=sp, delta=4
+	{
+	 move   \zreg, zero
+	 lw     \reg, \ptr
+	 addi   \ptr, \ptr, \delta
+	}
+	.endm
+
+	.macro  push_extra_callee_saves reg
+	PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51))
+	push_reg r51, \reg
+	push_reg r50, \reg
+	push_reg r49, \reg
+	push_reg r48, \reg
+	push_reg r47, \reg
+	push_reg r46, \reg
+	push_reg r45, \reg
+	push_reg r44, \reg
+	push_reg r43, \reg
+	push_reg r42, \reg
+	push_reg r41, \reg
+	push_reg r40, \reg
+	push_reg r39, \reg
+	push_reg r38, \reg
+	push_reg r37, \reg
+	push_reg r36, \reg
+	push_reg r35, \reg
+	push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34)
+	.endm
+
+	.macro  panic str
+	.pushsection .rodata, "a"
+1:
+	.asciz  "\str"
+	.popsection
+	{
+	 moveli r0, lo16(1b)
+	}
+	{
+	 auli   r0, r0, ha16(1b)
+	 jal    panic
+	}
+	.endm
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+	.pushsection .text.intvec_feedback,"ax"
+intvec_feedback:
+	.popsection
+#endif
+
+	/*
+	 * Default interrupt handler.
+	 *
+	 * vecnum is where we'll put this code.
+	 * c_routine is the C routine we'll call.
+	 *
+	 * The C routine is passed two arguments:
+	 * - A pointer to the pt_regs state.
+	 * - The interrupt vector number.
+	 *
+	 * The "processing" argument specifies the code for processing
+	 * the interrupt. Defaults to "handle_interrupt".
+	 */
+	.macro  int_hand vecnum, vecname, c_routine, processing=handle_interrupt
+	.org    (\vecnum << 8)
+intvec_\vecname:
+	.ifc    \vecnum, INT_SWINT_1
+	blz     TREG_SYSCALL_NR_NAME, sys_cmpxchg
+	.endif
+
+	/* Temporarily save a register so we have somewhere to work. */
+
+	mtspr   SYSTEM_SAVE_1_1, r0
+	mfspr   r0, EX_CONTEXT_1_1
+
+	/* The cmpxchg code clears sp to force us to reset it here on fault. */
+	{
+	 bz     sp, 2f
+	 andi   r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	}
+
+	.ifc    \vecnum, INT_DOUBLE_FAULT
+	/*
+	 * For double-faults from user-space, fall through to the normal
+	 * register save and stack setup path.  Otherwise, it's the
+	 * hypervisor giving us one last chance to dump diagnostics, and we
+	 * branch to the kernel_double_fault routine to do so.
+	 */
+	bz      r0, 1f
+	j       _kernel_double_fault
+1:
+	.else
+	/*
+	 * If we're coming from user-space, then set sp to the top of
+	 * the kernel stack.  Otherwise, assume sp is already valid.
+	 */
+	{
+	 bnz    r0, 0f
+	 move   r0, sp
+	}
+	.endif
+
+	.ifc    \c_routine, do_page_fault
+	/*
+	 * The page_fault handler may be downcalled directly by the
+	 * hypervisor even when Linux is running and has ICS set.
+	 *
+	 * In this case the contents of EX_CONTEXT_1_1 reflect the
+	 * previous fault and can't be relied on to choose whether or
+	 * not to reinitialize the stack pointer.  So we add a test
+	 * to see whether SYSTEM_SAVE_1_2 has the high bit set,
+	 * and if so we don't reinitialize sp, since we must be coming
+	 * from Linux.  (In fact the precise case is !(val & ~1),
+	 * but any Linux PC has to have the high bit set.)
+	 *
+	 * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for
+	 * any path that turns into a downcall to one of our TLB handlers.
+	 */
+	mfspr   r0, SYSTEM_SAVE_1_2
+	{
+	 blz    r0, 0f    /* high bit in S_S_1_2 is for a PC to use */
+	 move   r0, sp
+	}
+	.endif
+
+2:
+	/*
+	 * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and
+	 * the current stack top in the higher bits.  So we recover
+	 * our stack top by just masking off the low bits, then
+	 * point sp at the top aligned address on the actual stack page.
+	 */
+	mfspr   r0, SYSTEM_SAVE_1_0
+	mm      r0, r0, zero, LOG2_THREAD_SIZE, 31
+
+0:
+	/*
+	 * Align the stack mod 64 so we can properly predict what
+	 * cache lines we need to write-hint to reduce memory fetch
+	 * latency as we enter the kernel.  The layout of memory is
+	 * as follows, with cache line 0 at the lowest VA, and cache
+	 * line 4 just below the r0 value this "andi" computes.
+	 * Note that we never write to cache line 4, and we skip
+	 * cache line 1 for syscalls.
+	 *
+	 *    cache line 4: ptregs padding (two words)
+	 *    cache line 3: r46...lr, pc, ex1, faultnum, orig_r0, flags, pad
+	 *    cache line 2: r30...r45
+	 *    cache line 1: r14...r29
+	 *    cache line 0: 2 x frame, r0..r13
+	 */
+	andi    r0, r0, -64
+
+	/*
+	 * Push the first four registers on the stack, so that we can set
+	 * them to vector-unique values before we jump to the common code.
+	 *
+	 * Registers are pushed on the stack as a struct pt_regs,
+	 * with the sp initially just above the struct, and when we're
+	 * done, sp points to the base of the struct, minus
+	 * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code.
+	 *
+	 * This routine saves just the first four registers, plus the
+	 * stack context so we can do proper backtracing right away,
+	 * and defers to handle_interrupt to save the rest.
+	 * The backtracer needs pc, ex1, lr, sp, r52, and faultnum.
+	 */
+	addli   r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
+	wh64    r0    /* cache line 3 */
+	{
+	 sw     r0, lr
+	 addli  r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
+	}
+	{
+	 sw     r0, sp
+	 addli  sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP
+	}
+	{
+	 sw     sp, r52
+	 addli  sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52)
+	}
+	wh64    sp    /* cache line 0 */
+	{
+	 sw     sp, r1
+	 addli  sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1)
+	}
+	{
+	 sw     sp, r2
+	 addli  sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2)
+	}
+	{
+	 sw     sp, r3
+	 addli  sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
+	}
+	mfspr   r0, EX_CONTEXT_1_0
+	.ifc \processing,handle_syscall
+	/*
+	 * Bump the saved PC by one bundle so that when we return, we won't
+	 * execute the same swint instruction again.  We need to do this while
+	 * we're in the critical section.
+	 */
+	addi    r0, r0, 8
+	.endif
+	{
+	 sw     sp, r0
+	 addli  sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+	}
+	mfspr   r0, EX_CONTEXT_1_1
+	{
+	 sw     sp, r0
+	 addi   sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
+	/*
+	 * Use r0 for syscalls so it's a temporary; use r1 for interrupts
+	 * so that it gets passed through unchanged to the handler routine.
+	 * Note that the .if conditional confusingly spans bundles.
+	 */
+	 .ifc \processing,handle_syscall
+	 movei  r0, \vecnum
+	}
+	{
+	 sw     sp, r0
+	 .else
+	 movei  r1, \vecnum
+	}
+	{
+	 sw     sp, r1
+	 .endif
+	 addli  sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
+	}
+	mfspr   r0, SYSTEM_SAVE_1_1    /* Original r0 */
+	{
+	 sw     sp, r0
+	 addi   sp, sp, -PTREGS_OFFSET_REG(0) - 4
+	}
+	{
+	 sw     sp, zero        /* write zero into "Next SP" frame pointer */
+	 addi   sp, sp, -4      /* leave SP pointing at bottom of frame */
+	}
+	.ifc \processing,handle_syscall
+	j       handle_syscall
+	.else
+	/*
+	 * Capture per-interrupt SPR context to registers.
+	 * We overload the meaning of r3 on this path such that if its bit 31
+	 * is set, we have to mask all interrupts including NMIs before
+	 * clearing the interrupt critical section bit.
+	 * See discussion below at "finish_interrupt_save".
+	 */
+	.ifc \c_routine, do_page_fault
+	mfspr   r2, SYSTEM_SAVE_1_3   /* address of page fault */
+	mfspr   r3, SYSTEM_SAVE_1_2   /* info about page fault */
+	.else
+	.ifc \vecnum, INT_DOUBLE_FAULT
+	{
+	 mfspr  r2, SYSTEM_SAVE_1_2   /* double fault info from HV */
+	 movei  r3, 0
+	}
+	.else
+	.ifc \c_routine, do_trap
+	{
+	 mfspr  r2, GPV_REASON
+	 movei  r3, 0
+	}
+	.else
+	.ifc \c_routine, op_handle_perf_interrupt
+	{
+	 mfspr  r2, PERF_COUNT_STS
+	 movei  r3, -1   /* not used, but set for consistency */
+	}
+	.else
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+	.ifc \c_routine, op_handle_aux_perf_interrupt
+	{
+	 mfspr  r2, AUX_PERF_COUNT_STS
+	 movei  r3, -1   /* not used, but set for consistency */
+	}
+	.else
+#endif
+	movei   r3, 0
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+	.endif
+#endif
+	.endif
+	.endif
+	.endif
+	.endif
+	/* Put function pointer in r0 */
+	moveli  r0, lo16(\c_routine)
+	{
+	 auli   r0, r0, ha16(\c_routine)
+	 j       \processing
+	}
+	.endif
+	ENDPROC(intvec_\vecname)
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+	.pushsection .text.intvec_feedback,"ax"
+	.org    (\vecnum << 5)
+	FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8)
+	jrp     lr
+	.popsection
+#endif
+
+	.endm
+
+
+	/*
+	 * Save the rest of the registers that we didn't save in the actual
+	 * vector itself.  We can't use r0-r10 inclusive here.
+	 */
+	.macro  finish_interrupt_save, function
+
+	/* If it's a syscall, save a proper orig_r0, otherwise just zero. */
+	PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0)
+	{
+	 .ifc \function,handle_syscall
+	 sw     r52, r0
+	 .else
+	 sw     r52, zero
+	 .endif
+	 PTREGS_PTR(r52, PTREGS_OFFSET_TP)
+	}
+
+	/*
+	 * For ordinary syscalls, we save neither caller- nor callee-
+	 * save registers, since the syscall invoker doesn't expect the
+	 * caller-saves to be saved, and the called kernel functions will
+	 * take care of saving the callee-saves for us.
+	 *
+	 * For interrupts we save just the caller-save registers.  Saving
+	 * them is required (since the "caller" can't save them).  Again,
+	 * the called kernel functions will restore the callee-save
+	 * registers for us appropriately.
+	 *
+	 * On return, we normally restore nothing special for syscalls,
+	 * and just the caller-save registers for interrupts.
+	 *
+	 * However, there are some important caveats to all this:
+	 *
+	 * - We always save a few callee-save registers to give us
+	 *   some scratchpad registers to carry across function calls.
+	 *
+	 * - fork/vfork/etc require us to save all the callee-save
+	 *   registers, which we do in PTREGS_SYSCALL_ALL_REGS, below.
+	 *
+	 * - We always save r0..r5 and r10 for syscalls, since we need
+	 *   to reload them a bit later for the actual kernel call, and
+	 *   since we might need them for -ERESTARTNOINTR, etc.
+	 *
+	 * - Before invoking a signal handler, we save the unsaved
+	 *   callee-save registers so they are visible to the
+	 *   signal handler or any ptracer.
+	 *
+	 * - If the unsaved callee-save registers are modified, we set
+	 *   a bit in pt_regs so we know to reload them from pt_regs
+	 *   and not just rely on the kernel function unwinding.
+	 *   (Done for ptrace register writes and SA_SIGINFO handler.)
+	 */
+	{
+	 sw     r52, tp
+	 PTREGS_PTR(r52, PTREGS_OFFSET_REG(33))
+	}
+	wh64    r52    /* cache line 2 */
+	push_reg r33, r52
+	push_reg r32, r52
+	push_reg r31, r52
+	.ifc \function,handle_syscall
+	push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30)
+	push_reg TREG_SYSCALL_NR_NAME, r52, \
+	  PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL
+	.else
+
+	push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30)
+	wh64    r52    /* cache line 1 */
+	push_reg r29, r52
+	push_reg r28, r52
+	push_reg r27, r52
+	push_reg r26, r52
+	push_reg r25, r52
+	push_reg r24, r52
+	push_reg r23, r52
+	push_reg r22, r52
+	push_reg r21, r52
+	push_reg r20, r52
+	push_reg r19, r52
+	push_reg r18, r52
+	push_reg r17, r52
+	push_reg r16, r52
+	push_reg r15, r52
+	push_reg r14, r52
+	push_reg r13, r52
+	push_reg r12, r52
+	push_reg r11, r52
+	push_reg r10, r52
+	push_reg r9, r52
+	push_reg r8, r52
+	push_reg r7, r52
+	push_reg r6, r52
+
+	.endif
+
+	push_reg r5, r52
+	sw      r52, r4
+
+	/* Load tp with our per-cpu offset. */
+#ifdef CONFIG_SMP
+	{
+	 mfspr  r20, SYSTEM_SAVE_1_0
+	 moveli r21, lo16(__per_cpu_offset)
+	}
+	{
+	 auli   r21, r21, ha16(__per_cpu_offset)
+	 mm     r20, r20, zero, 0, LOG2_THREAD_SIZE-1
+	}
+	s2a     r20, r20, r21
+	lw      tp, r20
+#else
+	move    tp, zero
+#endif
+
+	/*
+	 * If we will be returning to the kernel, we will need to
+	 * reset the interrupt masks to the state they had before.
+	 * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled.
+	 * We load flags in r32 here so we can jump to .Lrestore_regs
+	 * directly after do_page_fault_ics() if necessary.
+	 */
+	mfspr   r32, EX_CONTEXT_1_1
+	{
+	 andi   r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	 PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
+	}
+	bzt     r32, 1f       /* zero if from user space */
+	IRQS_DISABLED(r32)    /* zero if irqs enabled */
+#if PT_FLAGS_DISABLE_IRQ != 1
+# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix
+#endif
+1:
+	.ifnc \function,handle_syscall
+	/* Record the fact that we saved the caller-save registers above. */
+	ori     r32, r32, PT_FLAGS_CALLER_SAVES
+	.endif
+	sw      r21, r32
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+	/*
+	 * Notify the feedback routines that we were in the
+	 * appropriate fixed interrupt vector area.  Note that we
+	 * still have ICS set at this point, so we can't invoke any
+	 * atomic operations or we will panic.  The feedback
+	 * routines internally preserve r0..r10 and r30 up.
+	 */
+	.ifnc \function,handle_syscall
+	shli    r20, r1, 5
+	.else
+	moveli  r20, INT_SWINT_1 << 5
+	.endif
+	addli   r20, r20, lo16(intvec_feedback)
+	auli    r20, r20, ha16(intvec_feedback)
+	jalr    r20
+
+	/* And now notify the feedback routines that we are here. */
+	FEEDBACK_ENTER(\function)
+#endif
+
+	/*
+	 * we've captured enough state to the stack (including in
+	 * particular our EX_CONTEXT state) that we can now release
+	 * the interrupt critical section and replace it with our
+	 * standard "interrupts disabled" mask value.  This allows
+	 * synchronous interrupts (and profile interrupts) to punch
+	 * through from this point onwards.
+	 *
+	 * If bit 31 of r3 is set during a non-NMI interrupt, we know we
+	 * are on the path where the hypervisor has punched through our
+	 * ICS with a page fault, so we call out to do_page_fault_ics()
+	 * to figure out what to do with it.  If the fault was in
+	 * an atomic op, we unlock the atomic lock, adjust the
+	 * saved register state a little, and return "zero" in r4,
+	 * falling through into the normal page-fault interrupt code.
+	 * If the fault was in a kernel-space atomic operation, then
+	 * do_page_fault_ics() resolves it itself, returns "one" in r4,
+	 * and as a result goes directly to restoring registers and iret,
+	 * without trying to adjust the interrupt masks at all.
+	 * The do_page_fault_ics() API involves passing and returning
+	 * a five-word struct (in registers) to avoid writing the
+	 * save and restore code here.
+	 */
+	.ifc \function,handle_nmi
+	IRQ_DISABLE_ALL(r20)
+	.else
+	.ifnc \function,handle_syscall
+	bgezt   r3, 1f
+	{
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	 jal    do_page_fault_ics
+	}
+	FEEDBACK_REENTER(\function)
+	bzt     r4, 1f
+	j       .Lrestore_regs
+1:
+	.endif
+	IRQ_DISABLE(r20, r21)
+	.endif
+	mtspr   INTERRUPT_CRITICAL_SECTION, zero
+
+#if CHIP_HAS_WH64()
+	/*
+	 * Prepare the first 256 stack bytes to be rapidly accessible
+	 * without having to fetch the background data.  We don't really
+	 * know how far to write-hint, but kernel stacks generally
+	 * aren't that big, and write-hinting here does take some time.
+	 */
+	addi    r52, sp, -64
+	{
+	 wh64   r52
+	 addi   r52, r52, -64
+	}
+	{
+	 wh64   r52
+	 addi   r52, r52, -64
+	}
+	{
+	 wh64   r52
+	 addi   r52, r52, -64
+	}
+	wh64    r52
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+	.ifnc \function,handle_nmi
+	/*
+	 * We finally have enough state set up to notify the irq
+	 * tracing code that irqs were disabled on entry to the handler.
+	 * The TRACE_IRQS_OFF call clobbers registers r0-r29.
+	 * For syscalls, we already have the register state saved away
+	 * on the stack, so we don't bother to do any register saves here,
+	 * and later we pop the registers back off the kernel stack.
+	 * For interrupt handlers, save r0-r3 in callee-saved registers.
+	 */
+	.ifnc \function,handle_syscall
+	{ move r30, r0; move r31, r1 }
+	{ move r32, r2; move r33, r3 }
+	.endif
+	TRACE_IRQS_OFF
+	.ifnc \function,handle_syscall
+	{ move r0, r30; move r1, r31 }
+	{ move r2, r32; move r3, r33 }
+	.endif
+	.endif
+#endif
+
+	.endm
+
+	.macro  check_single_stepping, kind, not_single_stepping
+	/*
+	 * Check for single stepping in user-level priv
+	 *   kind can be "normal", "ill", or "syscall"
+	 * At end, if fall-thru
+	 *   r29: thread_info->step_state
+	 *   r28: &pt_regs->pc
+	 *   r27: pt_regs->pc
+	 *   r26: thread_info->step_state->buffer
+	 */
+
+	/* Check for single stepping */
+	GET_THREAD_INFO(r29)
+	{
+	 /* Get pointer to field holding step state */
+	 addi   r29, r29, THREAD_INFO_STEP_STATE_OFFSET
+
+	 /* Get pointer to EX1 in register state */
+	 PTREGS_PTR(r27, PTREGS_OFFSET_EX1)
+	}
+	{
+	 /* Get pointer to field holding PC */
+	 PTREGS_PTR(r28, PTREGS_OFFSET_PC)
+
+	 /* Load the pointer to the step state */
+	 lw     r29, r29
+	}
+	/* Load EX1 */
+	lw      r27, r27
+	{
+	 /* Points to flags */
+	 addi   r23, r29, SINGLESTEP_STATE_FLAGS_OFFSET
+
+	 /* No single stepping if there is no step state structure */
+	 bzt    r29, \not_single_stepping
+	}
+	{
+	 /* mask off ICS and any other high bits */
+	 andi   r27, r27, SPR_EX_CONTEXT_1_1__PL_MASK
+
+	 /* Load pointer to single step instruction buffer */
+	 lw     r26, r29
+	}
+	/* Check priv state */
+	bnz     r27, \not_single_stepping
+
+	/* Get flags */
+	lw      r22, r23
+	{
+	 /* Branch if single-step mode not enabled */
+	 bbnst  r22, \not_single_stepping
+
+	 /* Clear enabled flag */
+	 andi   r22, r22, ~SINGLESTEP_STATE_MASK_IS_ENABLED
+	}
+	.ifc \kind,normal
+	{
+	 /* Load PC */
+	 lw     r27, r28
+
+	 /* Point to the entry containing the original PC */
+	 addi   r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET
+	}
+	{
+	 /* Disable single stepping flag */
+	 sw     r23, r22
+	}
+	{
+	 /* Get the original pc */
+	 lw     r24, r24
+
+	 /* See if the PC is at the start of the single step buffer */
+	 seq    r25, r26, r27
+	}
+	/*
+	 * NOTE: it is really expected that the PC be in the single step buffer
+	 *       at this point
+	 */
+	bzt     r25, \not_single_stepping
+
+	/* Restore the original PC */
+	sw      r28, r24
+	.else
+	.ifc \kind,syscall
+	{
+	 /* Load PC */
+	 lw     r27, r28
+
+	 /* Point to the entry containing the next PC */
+	 addi   r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET
+	}
+	{
+	 /* Increment the stopped PC by the bundle size */
+	 addi   r26, r26, 8
+
+	 /* Disable single stepping flag */
+	 sw     r23, r22
+	}
+	{
+	 /* Get the next pc */
+	 lw     r24, r24
+
+	 /*
+	  * See if the PC is one bundle past the start of the
+	  * single step buffer
+	  */
+	 seq    r25, r26, r27
+	}
+	{
+	 /*
+	  * NOTE: it is really expected that the PC be in the
+	  * single step buffer at this point
+	  */
+	 bzt    r25, \not_single_stepping
+	}
+	/* Set to the next PC */
+	sw      r28, r24
+	.else
+	{
+	 /* Point to 3rd bundle in buffer */
+	 addi   r25, r26, 16
+
+	 /* Load PC */
+	 lw      r27, r28
+	}
+	{
+	 /* Disable single stepping flag */
+	 sw      r23, r22
+
+	 /* See if the PC is in the single step buffer */
+	 slte_u  r24, r26, r27
+	}
+	{
+	 slte_u r25, r27, r25
+
+	 /*
+	  * NOTE: it is really expected that the PC be in the
+	  * single step buffer at this point
+	  */
+	 bzt    r24, \not_single_stepping
+	}
+	bzt     r25, \not_single_stepping
+	.endif
+	.endif
+	.endm
+
+	/*
+	 * Redispatch a downcall.
+	 */
+	.macro  dc_dispatch vecnum, vecname
+	.org    (\vecnum << 8)
+intvec_\vecname:
+	j       hv_downcall_dispatch
+	ENDPROC(intvec_\vecname)
+	.endm
+
+	/*
+	 * Common code for most interrupts.  The C function we're eventually
+	 * going to is in r0, and the faultnum is in r1; the original
+	 * values for those registers are on the stack.
+	 */
+	.pushsection .text.handle_interrupt,"ax"
+handle_interrupt:
+	finish_interrupt_save handle_interrupt
+
+	/*
+	 * Check for if we are single stepping in user level. If so, then
+	 * we need to restore the PC.
+	 */
+
+	check_single_stepping normal, .Ldispatch_interrupt
+.Ldispatch_interrupt:
+
+	/* Jump to the C routine; it should enable irqs as soon as possible. */
+	{
+	 jalr   r0
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	}
+	FEEDBACK_REENTER(handle_interrupt)
+	{
+	 movei  r30, 0   /* not an NMI */
+	 j      interrupt_return
+	}
+	STD_ENDPROC(handle_interrupt)
+
+/*
+ * This routine takes a boolean in r30 indicating if this is an NMI.
+ * If so, we also expect a boolean in r31 indicating whether to
+ * re-enable the oprofile interrupts.
+ */
+STD_ENTRY(interrupt_return)
+	/* If we're resuming to kernel space, don't check thread flags. */
+	{
+	 bnz    r30, .Lrestore_all  /* NMIs don't special-case user-space */
+	 PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
+	}
+	lw      r29, r29
+	andi    r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	{
+	 bzt    r29, .Lresume_userspace
+	 PTREGS_PTR(r29, PTREGS_OFFSET_PC)
+	}
+
+	/* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */
+	{
+	 lw     r28, r29
+	 moveli r27, lo16(_cpu_idle_nap)
+	}
+	{
+	 auli   r27, r27, ha16(_cpu_idle_nap)
+	}
+	{
+	 seq    r27, r27, r28
+	}
+	{
+	 bbns   r27, .Lrestore_all
+	 addi   r28, r28, 8
+	}
+	sw      r29, r28
+	j       .Lrestore_all
+
+.Lresume_userspace:
+	FEEDBACK_REENTER(interrupt_return)
+
+	/*
+	 * Disable interrupts so as to make sure we don't
+	 * miss an interrupt that sets any of the thread flags (like
+	 * need_resched or sigpending) between sampling and the iret.
+	 * Routines like schedule() or do_signal() may re-enable
+	 * interrupts before returning.
+	 */
+	IRQ_DISABLE(r20, r21)
+	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
+
+	/* Get base of stack in r32; note r30/31 are used as arguments here. */
+	GET_THREAD_INFO(r32)
+
+
+	/* Check to see if there is any work to do before returning to user. */
+	{
+	 addi   r29, r32, THREAD_INFO_FLAGS_OFFSET
+	 moveli r28, lo16(_TIF_ALLWORK_MASK)
+	}
+	{
+	 lw     r29, r29
+	 auli   r28, r28, ha16(_TIF_ALLWORK_MASK)
+	}
+	and     r28, r29, r28
+	bnz     r28, .Lwork_pending
+
+	/*
+	 * In the NMI case we
+	 * omit the call to single_process_check_nohz, which normally checks
+	 * to see if we should start or stop the scheduler tick, because
+	 * we can't call arbitrary Linux code from an NMI context.
+	 * We always call the homecache TLB deferral code to re-trigger
+	 * the deferral mechanism.
+	 *
+	 * The other chunk of responsibility this code has is to reset the
+	 * interrupt masks appropriately to reset irqs and NMIs.  We have
+	 * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the
+	 * lockdep-type stuff, but we can't set ICS until afterwards, since
+	 * ICS can only be used in very tight chunks of code to avoid
+	 * tripping over various assertions that it is off.
+	 *
+	 * (There is what looks like a window of vulnerability here since
+	 * we might take a profile interrupt between the two SPR writes
+	 * that set the mask, but since we write the low SPR word first,
+	 * and our interrupt entry code checks the low SPR word, any
+	 * profile interrupt will actually disable interrupts in both SPRs
+	 * before returning, which is OK.)
+	 */
+.Lrestore_all:
+	PTREGS_PTR(r0, PTREGS_OFFSET_EX1)
+	{
+	 lw     r0, r0
+	 PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS)
+	}
+	{
+	 andi   r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK
+	 lw     r32, r32
+	}
+	bnz    r0, 1f
+	j       2f
+#if PT_FLAGS_DISABLE_IRQ != 1
+# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use bbnst below
+#endif
+1:	bbnst   r32, 2f
+	IRQ_DISABLE(r20,r21)
+	TRACE_IRQS_OFF
+	movei   r0, 1
+	mtspr   INTERRUPT_CRITICAL_SECTION, r0
+	bzt     r30, .Lrestore_regs
+	j       3f
+2:	TRACE_IRQS_ON
+	movei   r0, 1
+	mtspr   INTERRUPT_CRITICAL_SECTION, r0
+	IRQ_ENABLE(r20, r21)
+	bzt     r30, .Lrestore_regs
+3:
+
+
+	/*
+	 * We now commit to returning from this interrupt, since we will be
+	 * doing things like setting EX_CONTEXT SPRs and unwinding the stack
+	 * frame.  No calls should be made to any other code after this point.
+	 * This code should only be entered with ICS set.
+	 * r32 must still be set to ptregs.flags.
+	 * We launch loads to each cache line separately first, so we can
+	 * get some parallelism out of the memory subsystem.
+	 * We start zeroing caller-saved registers throughout, since
+	 * that will save some cycles if this turns out to be a syscall.
+	 */
+.Lrestore_regs:
+	FEEDBACK_REENTER(interrupt_return)   /* called from elsewhere */
+
+	/*
+	 * Rotate so we have one high bit and one low bit to test.
+	 * - low bit says whether to restore all the callee-saved registers,
+	 *   or just r30-r33, and r52 up.
+	 * - high bit (i.e. sign bit) says whether to restore all the
+	 *   caller-saved registers, or just r0.
+	 */
+#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4
+# error Rotate trick does not work :-)
+#endif
+	{
+	 rli    r20, r32, 30
+	 PTREGS_PTR(sp, PTREGS_OFFSET_REG(0))
+	}
+
+	/*
+	 * Load cache lines 0, 2, and 3 in that order, then use
+	 * the last loaded value, which makes it likely that the other
+	 * cache lines have also loaded, at which point we should be
+	 * able to safely read all the remaining words on those cache
+	 * lines without waiting for the memory subsystem.
+	 */
+	pop_reg_zero r0, r1, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0)
+	pop_reg_zero r30, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(30)
+	pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+	pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
+	{
+	 mtspr  EX_CONTEXT_1_0, r21
+	 move   r5, zero
+	}
+	{
+	 mtspr  EX_CONTEXT_1_1, lr
+	 andi   lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	}
+
+	/* Restore callee-saveds that we actually use. */
+	pop_reg_zero r52, r6, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_REG(52)
+	pop_reg_zero r31, r7
+	pop_reg_zero r32, r8
+	pop_reg_zero r33, r9, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33)
+
+	/*
+	 * If we modified other callee-saveds, restore them now.
+	 * This is rare, but could be via ptrace or signal handler.
+	 */
+	{
+	 move   r10, zero
+	 bbs    r20, .Lrestore_callees
+	}
+.Lcontinue_restore_regs:
+
+	/* Check if we're returning from a syscall. */
+	{
+	 move   r11, zero
+	 blzt   r20, 1f  /* no, so go restore callee-save registers */
+	}
+
+	/*
+	 * Check if we're returning to userspace.
+	 * Note that if we're not, we don't worry about zeroing everything.
+	 */
+	{
+	 addli  sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29)
+	 bnz    lr, .Lkernel_return
+	}
+
+	/*
+	 * On return from syscall, we've restored r0 from pt_regs, but we
+	 * clear the remainder of the caller-saved registers.  We could
+	 * restore the syscall arguments, but there's not much point,
+	 * and it ensures user programs aren't trying to use the
+	 * caller-saves if we clear them, as well as avoiding leaking
+	 * kernel pointers into userspace.
+	 */
+	pop_reg_zero lr, r12, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
+	pop_reg_zero tp, r13, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
+	{
+	 lw     sp, sp
+	 move   r14, zero
+	 move   r15, zero
+	}
+	{ move r16, zero; move r17, zero }
+	{ move r18, zero; move r19, zero }
+	{ move r20, zero; move r21, zero }
+	{ move r22, zero; move r23, zero }
+	{ move r24, zero; move r25, zero }
+	{ move r26, zero; move r27, zero }
+	{ move r28, zero; move r29, zero }
+	iret
+
+	/*
+	 * Not a syscall, so restore caller-saved registers.
+	 * First kick off a load for cache line 1, which we're touching
+	 * for the first time here.
+	 */
+	.align 64
+1:	pop_reg r29, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(29)
+	pop_reg r1
+	pop_reg r2
+	pop_reg r3
+	pop_reg r4
+	pop_reg r5
+	pop_reg r6
+	pop_reg r7
+	pop_reg r8
+	pop_reg r9
+	pop_reg r10
+	pop_reg r11
+	pop_reg r12
+	pop_reg r13
+	pop_reg r14
+	pop_reg r15
+	pop_reg r16
+	pop_reg r17
+	pop_reg r18
+	pop_reg r19
+	pop_reg r20
+	pop_reg r21
+	pop_reg r22
+	pop_reg r23
+	pop_reg r24
+	pop_reg r25
+	pop_reg r26
+	pop_reg r27
+	pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28)
+	/* r29 already restored above */
+	bnz     lr, .Lkernel_return
+	pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
+	pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
+	lw      sp, sp
+	iret
+
+	/*
+	 * We can't restore tp when in kernel mode, since a thread might
+	 * have migrated from another cpu and brought a stale tp value.
+	 */
+.Lkernel_return:
+	pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
+	lw      sp, sp
+	iret
+
+	/* Restore callee-saved registers from r34 to r51. */
+.Lrestore_callees:
+	addli  sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29)
+	pop_reg r34
+	pop_reg r35
+	pop_reg r36
+	pop_reg r37
+	pop_reg r38
+	pop_reg r39
+	pop_reg r40
+	pop_reg r41
+	pop_reg r42
+	pop_reg r43
+	pop_reg r44
+	pop_reg r45
+	pop_reg r46
+	pop_reg r47
+	pop_reg r48
+	pop_reg r49
+	pop_reg r50
+	pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51)
+	j .Lcontinue_restore_regs
+
+.Lwork_pending:
+	/* Mask the reschedule flag */
+	andi    r28, r29, _TIF_NEED_RESCHED
+
+	{
+	 /*
+	  * If the NEED_RESCHED flag is called, we call schedule(), which
+	  * may drop this context right here and go do something else.
+	  * On return, jump back to .Lresume_userspace and recheck.
+	  */
+	 bz     r28, .Lasync_tlb
+
+	 /* Mask the async-tlb flag */
+	 andi   r28, r29, _TIF_ASYNC_TLB
+	}
+
+	jal     schedule
+	FEEDBACK_REENTER(interrupt_return)
+
+	/* Reload the flags and check again */
+	j       .Lresume_userspace
+
+.Lasync_tlb:
+	{
+	 bz     r28, .Lneed_sigpending
+
+	 /* Mask the sigpending flag */
+	 andi   r28, r29, _TIF_SIGPENDING
+	}
+
+	PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	jal     do_async_page_fault
+	FEEDBACK_REENTER(interrupt_return)
+
+	/*
+	 * Go restart the "resume userspace" process.  We may have
+	 * fired a signal, and we need to disable interrupts again.
+	 */
+	j       .Lresume_userspace
+
+.Lneed_sigpending:
+	/*
+	 * At this point we are either doing signal handling or single-step,
+	 * so either way make sure we have all the registers saved.
+	 */
+	push_extra_callee_saves r0
+
+	{
+	 /* If no signal pending, skip to singlestep check */
+	 bz     r28, .Lneed_singlestep
+
+	 /* Mask the singlestep flag */
+	 andi   r28, r29, _TIF_SINGLESTEP
+	}
+
+	jal     do_signal
+	FEEDBACK_REENTER(interrupt_return)
+
+	/* Reload the flags and check again */
+	j       .Lresume_userspace
+
+.Lneed_singlestep:
+	{
+	 /* Get a pointer to the EX1 field */
+	 PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
+
+	 /* If we get here, our bit must be set. */
+	 bz     r28, .Lwork_confusion
+	}
+	/* If we are in priv mode, don't single step */
+	lw      r28, r29
+	andi    r28, r28, SPR_EX_CONTEXT_1_1__PL_MASK  /* mask off ICS */
+	bnz     r28, .Lrestore_all
+
+	/* Allow interrupts within the single step code */
+	TRACE_IRQS_ON  /* Note: clobbers registers r0-r29 */
+	IRQ_ENABLE(r20, r21)
+
+	/* try to single-step the current instruction */
+	PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	jal     single_step_once
+	FEEDBACK_REENTER(interrupt_return)
+
+	/* Re-disable interrupts.  TRACE_IRQS_OFF in .Lrestore_all. */
+	IRQ_DISABLE(r20,r21)
+
+	j       .Lrestore_all
+
+.Lwork_confusion:
+	move    r0, r28
+	panic   "thread_info allwork flags unhandled on userspace resume: %#x"
+
+	STD_ENDPROC(interrupt_return)
+
+	/*
+	 * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit
+	 * before returning, so we can properly get more downcalls.
+	 */
+	.pushsection .text.handle_interrupt_downcall,"ax"
+handle_interrupt_downcall:
+	finish_interrupt_save handle_interrupt_downcall
+	check_single_stepping normal, .Ldispatch_downcall
+.Ldispatch_downcall:
+
+	/* Clear INTCTRL_1 from the set of interrupts we ever enable. */
+	GET_INTERRUPTS_ENABLED_MASK_PTR(r30)
+	{
+	 addi   r30, r30, 4
+	 movei  r31, INT_MASK(INT_INTCTRL_1)
+	}
+	{
+	 lw     r20, r30
+	 nor    r21, r31, zero
+	}
+	and     r20, r20, r21
+	sw      r30, r20
+
+	{
+	 jalr   r0
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	}
+	FEEDBACK_REENTER(handle_interrupt_downcall)
+
+	/* Allow INTCTRL_1 to be enabled next time we enable interrupts. */
+	lw      r20, r30
+	or      r20, r20, r31
+	sw      r30, r20
+
+	{
+	 movei  r30, 0   /* not an NMI */
+	 j      interrupt_return
+	}
+	STD_ENDPROC(handle_interrupt_downcall)
+
+	/*
+	 * Some interrupts don't check for single stepping
+	 */
+	.pushsection .text.handle_interrupt_no_single_step,"ax"
+handle_interrupt_no_single_step:
+	finish_interrupt_save handle_interrupt_no_single_step
+	{
+	 jalr   r0
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	}
+	FEEDBACK_REENTER(handle_interrupt_no_single_step)
+	{
+	 movei  r30, 0   /* not an NMI */
+	 j      interrupt_return
+	}
+	STD_ENDPROC(handle_interrupt_no_single_step)
+
+	/*
+	 * "NMI" interrupts mask ALL interrupts before calling the
+	 * handler, and don't check thread flags, etc., on the way
+	 * back out.  In general, the only things we do here for NMIs
+	 * are the register save/restore, fixing the PC if we were
+	 * doing single step, and the dataplane kernel-TLB management.
+	 * We don't (for example) deal with start/stop of the sched tick.
+	 */
+	.pushsection .text.handle_nmi,"ax"
+handle_nmi:
+	finish_interrupt_save handle_nmi
+	check_single_stepping normal, .Ldispatch_nmi
+.Ldispatch_nmi:
+	{
+	 jalr   r0
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	}
+	FEEDBACK_REENTER(handle_nmi)
+	j       interrupt_return
+	STD_ENDPROC(handle_nmi)
+
+	/*
+	 * Parallel code for syscalls to handle_interrupt.
+	 */
+	.pushsection .text.handle_syscall,"ax"
+handle_syscall:
+	finish_interrupt_save handle_syscall
+
+	/*
+	 * Check for if we are single stepping in user level. If so, then
+	 * we need to restore the PC.
+	 */
+	check_single_stepping syscall, .Ldispatch_syscall
+.Ldispatch_syscall:
+
+	/* Enable irqs. */
+	TRACE_IRQS_ON
+	IRQ_ENABLE(r20, r21)
+
+	/* Bump the counter for syscalls made on this tile. */
+	moveli  r20, lo16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
+	auli    r20, r20, ha16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
+	add     r20, r20, tp
+	lw      r21, r20
+	addi    r21, r21, 1
+	sw      r20, r21
+
+	/* Trace syscalls, if requested. */
+	GET_THREAD_INFO(r31)
+	addi	r31, r31, THREAD_INFO_FLAGS_OFFSET
+	lw	r30, r31
+	andi    r30, r30, _TIF_SYSCALL_TRACE
+	bzt	r30, .Lrestore_syscall_regs
+	jal	do_syscall_trace
+	FEEDBACK_REENTER(handle_syscall)
+
+	/*
+	 * We always reload our registers from the stack at this
+	 * point.  They might be valid, if we didn't build with
+	 * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not
+	 * doing syscall tracing, but there are enough cases now that it
+	 * seems simplest just to do the reload unconditionally.
+	 */
+.Lrestore_syscall_regs:
+	PTREGS_PTR(r11, PTREGS_OFFSET_REG(0))
+	pop_reg r0, r11
+	pop_reg r1, r11
+	pop_reg r2, r11
+	pop_reg r3, r11
+	pop_reg r4, r11
+	pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5)
+	pop_reg TREG_SYSCALL_NR_NAME, r11
+
+	/* Ensure that the syscall number is within the legal range. */
+	moveli  r21, __NR_syscalls
+	{
+	 slt_u  r21, TREG_SYSCALL_NR_NAME, r21
+	 moveli r20, lo16(sys_call_table)
+	}
+	{
+	 bbns   r21, .Linvalid_syscall
+	 auli   r20, r20, ha16(sys_call_table)
+	}
+	s2a     r20, TREG_SYSCALL_NR_NAME, r20
+	lw      r20, r20
+
+	/* Jump to syscall handler. */
+	jalr    r20; .Lhandle_syscall_link:
+	FEEDBACK_REENTER(handle_syscall)
+
+	/*
+	 * Write our r0 onto the stack so it gets restored instead
+	 * of whatever the user had there before.
+	 */
+	PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
+	sw      r29, r0
+
+	/* Do syscall trace again, if requested. */
+	lw	r30, r31
+	andi    r30, r30, _TIF_SYSCALL_TRACE
+	bzt     r30, 1f
+	jal	do_syscall_trace
+	FEEDBACK_REENTER(handle_syscall)
+1:	j       .Lresume_userspace   /* jump into middle of interrupt_return */
+
+.Linvalid_syscall:
+	/* Report an invalid syscall back to the user program */
+	{
+	 PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
+	 movei  r28, -ENOSYS
+	}
+	sw      r29, r28
+	j       .Lresume_userspace   /* jump into middle of interrupt_return */
+	STD_ENDPROC(handle_syscall)
+
+	/* Return the address for oprofile to suppress in backtraces. */
+STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall)
+	lnk     r0
+	{
+	 addli  r0, r0, .Lhandle_syscall_link - .
+	 jrp    lr
+	}
+	STD_ENDPROC(handle_syscall_link_address)
+
+STD_ENTRY(ret_from_fork)
+	jal     sim_notify_fork
+	jal     schedule_tail
+	FEEDBACK_REENTER(ret_from_fork)
+	j       .Lresume_userspace   /* jump into middle of interrupt_return */
+	STD_ENDPROC(ret_from_fork)
+
+	/*
+	 * Code for ill interrupt.
+	 */
+	.pushsection .text.handle_ill,"ax"
+handle_ill:
+	finish_interrupt_save handle_ill
+
+	/*
+	 * Check for if we are single stepping in user level. If so, then
+	 * we need to restore the PC.
+	 */
+	check_single_stepping ill, .Ldispatch_normal_ill
+
+	{
+	 /* See if the PC is the 1st bundle in the buffer */
+	 seq    r25, r27, r26
+
+	 /* Point to the 2nd bundle in the buffer */
+	 addi   r26, r26, 8
+	}
+	{
+	 /* Point to the original pc */
+	 addi   r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET
+
+	 /* Branch if the PC is the 1st bundle in the buffer */
+	 bnz    r25, 3f
+	}
+	{
+	 /* See if the PC is the 2nd bundle of the buffer */
+	 seq    r25, r27, r26
+
+	 /* Set PC to next instruction */
+	 addi   r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET
+	}
+	{
+	 /* Point to flags */
+	 addi   r25, r29, SINGLESTEP_STATE_FLAGS_OFFSET
+
+	 /* Branch if PC is in the second bundle */
+	 bz     r25, 2f
+	}
+	/* Load flags */
+	lw      r25, r25
+	{
+	 /*
+	  * Get the offset for the register to restore
+	  * Note: the lower bound is 2, so we have implicit scaling by 4.
+	  *  No multiplication of the register number by the size of a register
+	  *  is needed.
+	  */
+	 mm     r27, r25, zero, SINGLESTEP_STATE_TARGET_LB, \
+		SINGLESTEP_STATE_TARGET_UB
+
+	 /* Mask Rewrite_LR */
+	 andi   r25, r25, SINGLESTEP_STATE_MASK_UPDATE
+	}
+	{
+	 addi   r29, r29, SINGLESTEP_STATE_UPDATE_VALUE_OFFSET
+
+	 /* Don't rewrite temp register */
+	 bz     r25, 3f
+	}
+	{
+	 /* Get the temp value */
+	 lw     r29, r29
+
+	 /* Point to where the register is stored */
+	 add    r27, r27, sp
+	}
+
+	/* Add in the C ABI save area size to the register offset */
+	addi    r27, r27, C_ABI_SAVE_AREA_SIZE
+
+	/* Restore the user's register with the temp value */
+	sw      r27, r29
+	j       3f
+
+2:
+	/* Must be in the third bundle */
+	addi    r24, r29, SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET
+
+3:
+	/* set PC and continue */
+	lw      r26, r24
+	sw      r28, r26
+
+	/* Clear TIF_SINGLESTEP */
+	GET_THREAD_INFO(r0)
+
+	addi    r1, r0, THREAD_INFO_FLAGS_OFFSET
+	{
+	 lw     r2, r1
+	 addi   r0, r0, THREAD_INFO_TASK_OFFSET  /* currently a no-op */
+	}
+	andi    r2, r2, ~_TIF_SINGLESTEP
+	sw      r1, r2
+
+	/* Issue a sigtrap */
+	{
+	 lw     r0, r0          /* indirect thru thread_info to get task_info*/
+	 addi   r1, sp, C_ABI_SAVE_AREA_SIZE  /* put ptregs pointer into r1 */
+	 move   r2, zero        /* load error code into r2 */
+	}
+
+	jal     send_sigtrap    /* issue a SIGTRAP */
+	FEEDBACK_REENTER(handle_ill)
+	j       .Lresume_userspace   /* jump into middle of interrupt_return */
+
+.Ldispatch_normal_ill:
+	{
+	 jalr   r0
+	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+	}
+	FEEDBACK_REENTER(handle_ill)
+	{
+	 movei  r30, 0   /* not an NMI */
+	 j      interrupt_return
+	}
+	STD_ENDPROC(handle_ill)
+
+	.pushsection .rodata, "a"
+	.align  8
+bpt_code:
+	bpt
+	ENDPROC(bpt_code)
+	.popsection
+
+/* Various stub interrupt handlers and syscall handlers */
+
+STD_ENTRY_LOCAL(_kernel_double_fault)
+	mfspr   r1, EX_CONTEXT_1_0
+	move    r2, lr
+	move    r3, sp
+	move    r4, r52
+	addi    sp, sp, -C_ABI_SAVE_AREA_SIZE
+	j       kernel_double_fault
+	STD_ENDPROC(_kernel_double_fault)
+
+STD_ENTRY_LOCAL(bad_intr)
+	mfspr   r2, EX_CONTEXT_1_0
+	panic   "Unhandled interrupt %#x: PC %#lx"
+	STD_ENDPROC(bad_intr)
+
+/* Put address of pt_regs in reg and jump. */
+#define PTREGS_SYSCALL(x, reg)                          \
+	STD_ENTRY(x);                                   \
+	{                                               \
+	 PTREGS_PTR(reg, PTREGS_OFFSET_BASE);           \
+	 j      _##x                                    \
+	};                                              \
+	STD_ENDPROC(x)
+
+PTREGS_SYSCALL(sys_execve, r3)
+PTREGS_SYSCALL(sys_sigaltstack, r2)
+PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+
+/* Save additional callee-saves to pt_regs, put address in reg and jump. */
+#define PTREGS_SYSCALL_ALL_REGS(x, reg)                 \
+	STD_ENTRY(x);                                   \
+	push_extra_callee_saves reg;                    \
+	j       _##x;                                   \
+	STD_ENDPROC(x)
+
+PTREGS_SYSCALL_ALL_REGS(sys_fork, r0)
+PTREGS_SYSCALL_ALL_REGS(sys_vfork, r0)
+PTREGS_SYSCALL_ALL_REGS(sys_clone, r4)
+PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
+
+/*
+ * This entrypoint is taken for the cmpxchg and atomic_update fast
+ * swints.  We may wish to generalize it to other fast swints at some
+ * point, but for now there are just two very similar ones, which
+ * makes it faster.
+ *
+ * The fast swint code is designed to have a small footprint.  It does
+ * not save or restore any GPRs, counting on the caller-save registers
+ * to be available to it on entry.  It does not modify any callee-save
+ * registers (including "lr").  It does not check what PL it is being
+ * called at, so you'd better not call it other than at PL0.
+ *
+ * It does not use the stack, but since it might be re-interrupted by
+ * a page fault which would assume the stack was valid, it does
+ * save/restore the stack pointer and zero it out to make sure it gets reset.
+ * Since we always keep interrupts disabled, the hypervisor won't
+ * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them
+ * (other than to advance the PC on return).
+ *
+ * We have to manually validate the user vs kernel address range
+ * (since at PL1 we can read/write both), and for performance reasons
+ * we don't allow cmpxchg on the fc000000 memory region, since we only
+ * validate that the user address is below PAGE_OFFSET.
+ *
+ * We place it in the __HEAD section to ensure it is relatively
+ * near to the intvec_SWINT_1 code (reachable by a conditional branch).
+ *
+ * Must match register usage in do_page_fault().
+ */
+	__HEAD
+	.align 64
+	/* Align much later jump on the start of a cache line. */
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	nop; nop
+#endif
+ENTRY(sys_cmpxchg)
+
+	/*
+	 * Save "sp" and set it zero for any possible page fault.
+	 *
+	 * HACK: We want to both zero sp and check r0's alignment,
+	 * so we do both at once. If "sp" becomes nonzero we
+	 * know r0 is unaligned and branch to the error handler that
+	 * restores sp, so this is OK.
+	 *
+	 * ICS is disabled right now so having a garbage but nonzero
+	 * sp is OK, since we won't execute any faulting instructions
+	 * when it is nonzero.
+	 */
+	{
+	 move   r27, sp
+	 andi	sp, r0, 3
+	}
+
+	/*
+	 * Get the lock address in ATOMIC_LOCK_REG, and also validate that the
+	 * address is less than PAGE_OFFSET, since that won't trap at PL1.
+	 * We only use bits less than PAGE_SHIFT to avoid having to worry
+	 * about aliasing among multiple mappings of the same physical page,
+	 * and we ignore the low 3 bits so we have one lock that covers
+	 * both a cmpxchg64() and a cmpxchg() on either its low or high word.
+	 * NOTE: this code must match __atomic_hashed_lock() in lib/atomic.c.
+	 */
+
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	{
+	 /* Check for unaligned input. */
+	 bnz    sp, .Lcmpxchg_badaddr
+	 mm     r25, r0, zero, 3, PAGE_SHIFT-1
+	}
+	{
+	 crc32_32 r25, zero, r25
+	 moveli r21, lo16(atomic_lock_ptr)
+	}
+	{
+	 auli   r21, r21, ha16(atomic_lock_ptr)
+	 auli   r23, zero, hi16(PAGE_OFFSET)  /* hugepage-aligned */
+	}
+	{
+	 shri	r20, r25, 32 - ATOMIC_HASH_L1_SHIFT
+	 slt_u  r23, r0, r23
+
+	 /*
+	  * Ensure that the TLB is loaded before we take out the lock.
+	  * On TILEPro, this will start fetching the value all the way
+	  * into our L1 as well (and if it gets modified before we
+	  * grab the lock, it will be invalidated from our cache
+	  * before we reload it).  On tile64, we'll start fetching it
+	  * into our L1 if we're the home, and if we're not, we'll
+	  * still at least start fetching it into the home's L2.
+	  */
+	 lw	r26, r0
+	}
+	{
+	 s2a    r21, r20, r21
+	 bbns   r23, .Lcmpxchg_badaddr
+	}
+	{
+	 lw     r21, r21
+	 seqi	r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
+	 andi	r25, r25, ATOMIC_HASH_L2_SIZE - 1
+	}
+	{
+	 /* Branch away at this point if we're doing a 64-bit cmpxchg. */
+	 bbs    r23, .Lcmpxchg64
+	 andi   r23, r0, 7       /* Precompute alignment for cmpxchg64. */
+	}
+
+	{
+	 /*
+	  * We very carefully align the code that actually runs with
+	  * the lock held (nine bundles) so that we know it is all in
+	  * the icache when we start.  This instruction (the jump) is
+	  * at the start of the first cache line, address zero mod 64;
+	  * we jump to somewhere in the second cache line to issue the
+	  * tns, then jump back to finish up.
+	  */
+	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
+	 j      .Lcmpxchg32_tns
+	}
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+	{
+	 /* Check for unaligned input. */
+	 bnz    sp, .Lcmpxchg_badaddr
+	 auli   r23, zero, hi16(PAGE_OFFSET)  /* hugepage-aligned */
+	}
+	{
+	 /*
+	  * Slide bits into position for 'mm'. We want to ignore
+	  * the low 3 bits of r0, and consider only the next
+	  * ATOMIC_HASH_SHIFT bits.
+	  * Because of C pointer arithmetic, we want to compute this:
+	  *
+	  * ((char*)atomic_locks +
+	  *  (((r0 >> 3) & (1 << (ATOMIC_HASH_SIZE - 1))) << 2))
+	  *
+	  * Instead of two shifts we just ">> 1", and use 'mm'
+	  * to ignore the low and high bits we don't want.
+	  */
+	 shri	r25, r0, 1
+
+	 slt_u  r23, r0, r23
+
+	 /*
+	  * Ensure that the TLB is loaded before we take out the lock.
+	  * On tilepro, this will start fetching the value all the way
+	  * into our L1 as well (and if it gets modified before we
+	  * grab the lock, it will be invalidated from our cache
+	  * before we reload it).  On tile64, we'll start fetching it
+	  * into our L1 if we're the home, and if we're not, we'll
+	  * still at least start fetching it into the home's L2.
+	  */
+	 lw	r26, r0
+	}
+	{
+	 /* atomic_locks is page aligned so this suffices to get its addr. */
+	 auli	r21, zero, hi16(atomic_locks)
+
+	 bbns   r23, .Lcmpxchg_badaddr
+	}
+	{
+	 /*
+	  * Insert the hash bits into the page-aligned pointer.
+	  * ATOMIC_HASH_SHIFT is so big that we don't actually hash
+	  * the unmasked address bits, as that may cause unnecessary
+	  * collisions.
+	  */
+	 mm	ATOMIC_LOCK_REG_NAME, r25, r21, 2, (ATOMIC_HASH_SHIFT + 2) - 1
+
+	 seqi	r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
+	}
+	{
+	 /* Branch away at this point if we're doing a 64-bit cmpxchg. */
+	 bbs    r23, .Lcmpxchg64
+	 andi   r23, r0, 7       /* Precompute alignment for cmpxchg64. */
+	}
+	{
+	 /*
+	  * We very carefully align the code that actually runs with
+	  * the lock held (nine bundles) so that we know it is all in
+	  * the icache when we start.  This instruction (the jump) is
+	  * at the start of the first cache line, address zero mod 64;
+	  * we jump to somewhere in the second cache line to issue the
+	  * tns, then jump back to finish up.
+	  */
+	 j      .Lcmpxchg32_tns
+	}
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+	ENTRY(__sys_cmpxchg_grab_lock)
+
+	/*
+	 * Perform the actual cmpxchg or atomic_update.
+	 * Note that __futex_mark_unlocked() in uClibc relies on
+	 * atomic_update() to always perform an "mf", so don't make
+	 * it optional or conditional without modifying that code.
+	 */
+.Ldo_cmpxchg32:
+	{
+	 lw     r21, r0
+	 seqi	r23, TREG_SYSCALL_NR_NAME, __NR_FAST_atomic_update
+	 move	r24, r2
+	}
+	{
+	 seq    r22, r21, r1     /* See if cmpxchg matches. */
+	 and	r25, r21, r1     /* If atomic_update, compute (*mem & mask) */
+	}
+	{
+	 or	r22, r22, r23    /* Skip compare branch for atomic_update. */
+	 add	r25, r25, r2     /* Compute (*mem & mask) + addend. */
+	}
+	{
+	 mvnz	r24, r23, r25    /* Use atomic_update value if appropriate. */
+	 bbns   r22, .Lcmpxchg32_mismatch
+	}
+	sw      r0, r24
+
+	/* Do slow mtspr here so the following "mf" waits less. */
+	{
+	 move   sp, r27
+	 mtspr  EX_CONTEXT_1_0, r28
+	}
+	mf
+
+	/* The following instruction is the start of the second cache line. */
+	{
+	 move   r0, r21
+	 sw     ATOMIC_LOCK_REG_NAME, zero
+	}
+	iret
+
+	/* Duplicated code here in the case where we don't overlap "mf" */
+.Lcmpxchg32_mismatch:
+	{
+	 move   r0, r21
+	 sw     ATOMIC_LOCK_REG_NAME, zero
+	}
+	{
+	 move   sp, r27
+	 mtspr  EX_CONTEXT_1_0, r28
+	}
+	iret
+
+	/*
+	 * The locking code is the same for 32-bit cmpxchg/atomic_update,
+	 * and for 64-bit cmpxchg.  We provide it as a macro and put
+	 * it into both versions.  We can't share the code literally
+	 * since it depends on having the right branch-back address.
+	 * Note that the first few instructions should share the cache
+	 * line with the second half of the actual locked code.
+	 */
+	.macro  cmpxchg_lock, bitwidth
+
+	/* Lock; if we succeed, jump back up to the read-modify-write. */
+#ifdef CONFIG_SMP
+	tns     r21, ATOMIC_LOCK_REG_NAME
+#else
+	/*
+	 * Non-SMP preserves all the lock infrastructure, to keep the
+	 * code simpler for the interesting (SMP) case.  However, we do
+	 * one small optimization here and in atomic_asm.S, which is
+	 * to fake out acquiring the actual lock in the atomic_lock table.
+	 */
+	movei	r21, 0
+#endif
+
+	/* Issue the slow SPR here while the tns result is in flight. */
+	mfspr   r28, EX_CONTEXT_1_0
+
+	{
+	 addi   r28, r28, 8    /* return to the instruction after the swint1 */
+	 bzt    r21, .Ldo_cmpxchg\bitwidth
+	}
+	/*
+	 * The preceding instruction is the last thing that must be
+	 * on the second cache line.
+	 */
+
+#ifdef CONFIG_SMP
+	/*
+	 * We failed to acquire the tns lock on our first try.  Now use
+	 * bounded exponential backoff to retry, like __atomic_spinlock().
+	 */
+	{
+	 moveli r23, 2048       /* maximum backoff time in cycles */
+	 moveli r25, 32         /* starting backoff time in cycles */
+	}
+1:	mfspr   r26, CYCLE_LOW  /* get start point for this backoff */
+2:	mfspr   r22, CYCLE_LOW  /* test to see if we've backed off enough */
+	sub     r22, r22, r26
+	slt     r22, r22, r25
+	bbst    r22, 2b
+	{
+	 shli   r25, r25, 1     /* double the backoff; retry the tns */
+	 tns    r21, ATOMIC_LOCK_REG_NAME
+	}
+	slt     r26, r23, r25   /* is the proposed backoff too big? */
+	{
+	 mvnz   r25, r26, r23
+	 bzt    r21, .Ldo_cmpxchg\bitwidth
+	}
+	j       1b
+#endif /* CONFIG_SMP */
+	.endm
+
+.Lcmpxchg32_tns:
+	cmpxchg_lock 32
+
+	/*
+	 * This code is invoked from sys_cmpxchg after most of the
+	 * preconditions have been checked.  We still need to check
+	 * that r0 is 8-byte aligned, since if it's not we won't
+	 * actually be atomic.  However, ATOMIC_LOCK_REG has the atomic
+	 * lock pointer and r27/r28 have the saved SP/PC.
+	 * r23 is holding "r0 & 7" so we can test for alignment.
+	 * The compare value is in r2/r3; the new value is in r4/r5.
+	 * On return, we must put the old value in r0/r1.
+	 */
+	.align 64
+.Lcmpxchg64:
+	{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
+#endif
+	 bzt     r23, .Lcmpxchg64_tns
+	}
+	j       .Lcmpxchg_badaddr
+
+.Ldo_cmpxchg64:
+	{
+	 lw     r21, r0
+	 addi   r25, r0, 4
+	}
+	{
+	 lw     r1, r25
+	}
+	seq     r26, r21, r2
+	{
+	 bz     r26, .Lcmpxchg64_mismatch
+	 seq    r26, r1, r3
+	}
+	{
+	 bz     r26, .Lcmpxchg64_mismatch
+	}
+	sw      r0, r4
+	sw      r25, r5
+
+	/*
+	 * The 32-bit path provides optimized "match" and "mismatch"
+	 * iret paths, but we don't have enough bundles in this cache line
+	 * to do that, so we just make even the "mismatch" path do an "mf".
+	 */
+.Lcmpxchg64_mismatch:
+	{
+	 move   sp, r27
+	 mtspr  EX_CONTEXT_1_0, r28
+	}
+	mf
+	{
+	 move   r0, r21
+	 sw     ATOMIC_LOCK_REG_NAME, zero
+	}
+	iret
+
+.Lcmpxchg64_tns:
+	cmpxchg_lock 64
+
+
+	/*
+	 * Reset sp and revector to sys_cmpxchg_badaddr(), which will
+	 * just raise the appropriate signal and exit.  Doing it this
+	 * way means we don't have to duplicate the code in intvec.S's
+	 * int_hand macro that locates the top of the stack.
+	 */
+.Lcmpxchg_badaddr:
+	{
+	 moveli TREG_SYSCALL_NR_NAME, __NR_cmpxchg_badaddr
+	 move   sp, r27
+	}
+	j       intvec_SWINT_1
+	ENDPROC(sys_cmpxchg)
+	ENTRY(__sys_cmpxchg_end)
+
+
+/* The single-step support may need to read all the registers. */
+int_unalign:
+	push_extra_callee_saves r0
+	j       do_trap
+
+/* Include .intrpt1 array of interrupt vectors */
+	.section ".intrpt1", "ax"
+
+#define op_handle_perf_interrupt bad_intr
+#define op_handle_aux_perf_interrupt bad_intr
+
+#ifndef CONFIG_HARDWALL
+#define do_hardwall_trap bad_intr
+#endif
+
+	int_hand     INT_ITLB_MISS, ITLB_MISS, \
+		     do_page_fault, handle_interrupt_no_single_step
+	int_hand     INT_MEM_ERROR, MEM_ERROR, bad_intr
+	int_hand     INT_ILL, ILL, do_trap, handle_ill
+	int_hand     INT_GPV, GPV, do_trap
+	int_hand     INT_SN_ACCESS, SN_ACCESS, do_trap
+	int_hand     INT_IDN_ACCESS, IDN_ACCESS, do_trap
+	int_hand     INT_UDN_ACCESS, UDN_ACCESS, do_trap
+	int_hand     INT_IDN_REFILL, IDN_REFILL, bad_intr
+	int_hand     INT_UDN_REFILL, UDN_REFILL, bad_intr
+	int_hand     INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr
+	int_hand     INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr
+	int_hand     INT_SWINT_3, SWINT_3, do_trap
+	int_hand     INT_SWINT_2, SWINT_2, do_trap
+	int_hand     INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall
+	int_hand     INT_SWINT_0, SWINT_0, do_trap
+	int_hand     INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign
+	int_hand     INT_DTLB_MISS, DTLB_MISS, do_page_fault
+	int_hand     INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
+	int_hand     INT_DMATLB_MISS, DMATLB_MISS, do_page_fault
+	int_hand     INT_DMATLB_ACCESS, DMATLB_ACCESS, do_page_fault
+	int_hand     INT_SNITLB_MISS, SNITLB_MISS, do_page_fault
+	int_hand     INT_SN_NOTIFY, SN_NOTIFY, bad_intr
+	int_hand     INT_SN_FIREWALL, SN_FIREWALL, do_hardwall_trap
+	int_hand     INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr
+	int_hand     INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap
+	int_hand     INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt
+	int_hand     INT_IDN_TIMER, IDN_TIMER, bad_intr
+	int_hand     INT_UDN_TIMER, UDN_TIMER, bad_intr
+	int_hand     INT_DMA_NOTIFY, DMA_NOTIFY, bad_intr
+	int_hand     INT_IDN_CA, IDN_CA, bad_intr
+	int_hand     INT_UDN_CA, UDN_CA, bad_intr
+	int_hand     INT_IDN_AVAIL, IDN_AVAIL, bad_intr
+	int_hand     INT_UDN_AVAIL, UDN_AVAIL, bad_intr
+	int_hand     INT_PERF_COUNT, PERF_COUNT, \
+		     op_handle_perf_interrupt, handle_nmi
+	int_hand     INT_INTCTRL_3, INTCTRL_3, bad_intr
+	int_hand     INT_INTCTRL_2, INTCTRL_2, bad_intr
+	dc_dispatch  INT_INTCTRL_1, INTCTRL_1
+	int_hand     INT_INTCTRL_0, INTCTRL_0, bad_intr
+	int_hand     INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
+		     hv_message_intr, handle_interrupt_downcall
+	int_hand     INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \
+		     tile_dev_intr, handle_interrupt_downcall
+	int_hand     INT_I_ASID, I_ASID, bad_intr
+	int_hand     INT_D_ASID, D_ASID, bad_intr
+	int_hand     INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \
+		     do_page_fault, handle_interrupt_downcall
+	int_hand     INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \
+		     do_page_fault, handle_interrupt_downcall
+	int_hand     INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \
+		     do_page_fault, handle_interrupt_downcall
+	int_hand     INT_SN_CPL, SN_CPL, bad_intr
+	int_hand     INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+	int_hand     INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
+		     op_handle_aux_perf_interrupt, handle_nmi
+#endif
+
+	/* Synthetic interrupt delivered only by the simulator */
+	int_hand     INT_BREAKPOINT, BREAKPOINT, do_breakpoint
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
new file mode 100644
index 00000000000..596c6008693
--- /dev/null
+++ b/arch/tile/kernel/irq.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/uaccess.h>
+#include <hv/drv_pcie_rc_intf.h>
+#include <arch/spr_def.h>
+#include <asm/traps.h>
+
+/* Bit-flag stored in irq_desc->chip_data to indicate HW-cleared irqs. */
+#define IS_HW_CLEARED 1
+
+/*
+ * The set of interrupts we enable for raw_local_irq_enable().
+ * This is initialized to have just a single interrupt that the kernel
+ * doesn't actually use as a sentinel.  During kernel init,
+ * interrupts are added as the kernel gets prepared to support them.
+ * NOTE: we could probably initialize them all statically up front.
+ */
+DEFINE_PER_CPU(unsigned long long, interrupts_enabled_mask) =
+  INITIAL_INTERRUPTS_ENABLED;
+EXPORT_PER_CPU_SYMBOL(interrupts_enabled_mask);
+
+/* Define per-tile device interrupt statistics state. */
+DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+/*
+ * Define per-tile irq disable mask; the hardware/HV only has a single
+ * mask that we use to implement both masking and disabling.
+ */
+static DEFINE_PER_CPU(unsigned long, irq_disable_mask)
+	____cacheline_internodealigned_in_smp;
+
+/*
+ * Per-tile IRQ nesting depth.  Used to make sure we enable newly
+ * enabled IRQs before exiting the outermost interrupt.
+ */
+static DEFINE_PER_CPU(int, irq_depth);
+
+/* State for allocating IRQs on Gx. */
+#if CHIP_HAS_IPI()
+static unsigned long available_irqs = ~(1UL << IRQ_RESCHEDULE);
+static DEFINE_SPINLOCK(available_irqs_lock);
+#endif
+
+#if CHIP_HAS_IPI()
+/* Use SPRs to manipulate device interrupts. */
+#define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_1, irq_mask)
+#define unmask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_RESET_1, irq_mask)
+#define clear_irqs(irq_mask) __insn_mtspr(SPR_IPI_EVENT_RESET_1, irq_mask)
+#else
+/* Use HV to manipulate device interrupts. */
+#define mask_irqs(irq_mask) hv_disable_intr(irq_mask)
+#define unmask_irqs(irq_mask) hv_enable_intr(irq_mask)
+#define clear_irqs(irq_mask) hv_clear_intr(irq_mask)
+#endif
+
+/*
+ * The interrupt handling path, implemented in terms of HV interrupt
+ * emulation on TILE64 and TILEPro, and IPI hardware on TILE-Gx.
+ */
+void tile_dev_intr(struct pt_regs *regs, int intnum)
+{
+	int depth = __get_cpu_var(irq_depth)++;
+	unsigned long original_irqs;
+	unsigned long remaining_irqs;
+	struct pt_regs *old_regs;
+
+#if CHIP_HAS_IPI()
+	/*
+	 * Pending interrupts are listed in an SPR.  We might be
+	 * nested, so be sure to only handle irqs that weren't already
+	 * masked by a previous interrupt.  Then, mask out the ones
+	 * we're going to handle.
+	 */
+	unsigned long masked = __insn_mfspr(SPR_IPI_MASK_1);
+	original_irqs = __insn_mfspr(SPR_IPI_EVENT_1) & ~masked;
+	__insn_mtspr(SPR_IPI_MASK_SET_1, original_irqs);
+#else
+	/*
+	 * Hypervisor performs the equivalent of the Gx code above and
+	 * then puts the pending interrupt mask into a system save reg
+	 * for us to find.
+	 */
+	original_irqs = __insn_mfspr(SPR_SYSTEM_SAVE_1_3);
+#endif
+	remaining_irqs = original_irqs;
+
+	/* Track time spent here in an interrupt context. */
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: less than 1/8th stack free? */
+	{
+		long sp = stack_pointer - (long) current_thread_info();
+		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+			pr_emerg("tile_dev_intr: "
+			       "stack overflow: %ld\n",
+			       sp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+	while (remaining_irqs) {
+		unsigned long irq = __ffs(remaining_irqs);
+		remaining_irqs &= ~(1UL << irq);
+
+		/* Count device irqs; Linux IPIs are counted elsewhere. */
+		if (irq != IRQ_RESCHEDULE)
+			__get_cpu_var(irq_stat).irq_dev_intr_count++;
+
+		generic_handle_irq(irq);
+	}
+
+	/*
+	 * If we weren't nested, turn on all enabled interrupts,
+	 * including any that were reenabled during interrupt
+	 * handling.
+	 */
+	if (depth == 0)
+		unmask_irqs(~__get_cpu_var(irq_disable_mask));
+
+	__get_cpu_var(irq_depth)--;
+
+	/*
+	 * Track time spent against the current process again and
+	 * process any softirqs if they are waiting.
+	 */
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+
+/*
+ * Remove an irq from the disabled mask.  If we're in an interrupt
+ * context, defer enabling the HW interrupt until we leave.
+ */
+void enable_percpu_irq(unsigned int irq)
+{
+	get_cpu_var(irq_disable_mask) &= ~(1UL << irq);
+	if (__get_cpu_var(irq_depth) == 0)
+		unmask_irqs(1UL << irq);
+	put_cpu_var(irq_disable_mask);
+}
+EXPORT_SYMBOL(enable_percpu_irq);
+
+/*
+ * Add an irq to the disabled mask.  We disable the HW interrupt
+ * immediately so that there's no possibility of it firing.  If we're
+ * in an interrupt context, the return path is careful to avoid
+ * unmasking a newly disabled interrupt.
+ */
+void disable_percpu_irq(unsigned int irq)
+{
+	get_cpu_var(irq_disable_mask) |= (1UL << irq);
+	mask_irqs(1UL << irq);
+	put_cpu_var(irq_disable_mask);
+}
+EXPORT_SYMBOL(disable_percpu_irq);
+
+/* Mask an interrupt. */
+static void tile_irq_chip_mask(unsigned int irq)
+{
+	mask_irqs(1UL << irq);
+}
+
+/* Unmask an interrupt. */
+static void tile_irq_chip_unmask(unsigned int irq)
+{
+	unmask_irqs(1UL << irq);
+}
+
+/*
+ * Clear an interrupt before processing it so that any new assertions
+ * will trigger another irq.
+ */
+static void tile_irq_chip_ack(unsigned int irq)
+{
+	if ((unsigned long)get_irq_chip_data(irq) != IS_HW_CLEARED)
+		clear_irqs(1UL << irq);
+}
+
+/*
+ * For per-cpu interrupts, we need to avoid unmasking any interrupts
+ * that we disabled via disable_percpu_irq().
+ */
+static void tile_irq_chip_eoi(unsigned int irq)
+{
+	if (!(__get_cpu_var(irq_disable_mask) & (1UL << irq)))
+		unmask_irqs(1UL << irq);
+}
+
+static struct irq_chip tile_irq_chip = {
+	.typename = "tile_irq_chip",
+	.ack = tile_irq_chip_ack,
+	.eoi = tile_irq_chip_eoi,
+	.mask = tile_irq_chip_mask,
+	.unmask = tile_irq_chip_unmask,
+};
+
+void __init init_IRQ(void)
+{
+	ipi_init();
+}
+
+void __cpuinit setup_irq_regs(void)
+{
+	/* Enable interrupt delivery. */
+	unmask_irqs(~0UL);
+#if CHIP_HAS_IPI()
+	raw_local_irq_unmask(INT_IPI_1);
+#endif
+}
+
+void tile_irq_activate(unsigned int irq, int tile_irq_type)
+{
+	/*
+	 * We use handle_level_irq() by default because the pending
+	 * interrupt vector (whether modeled by the HV on TILE64 and
+	 * TILEPro or implemented in hardware on TILE-Gx) has
+	 * level-style semantics for each bit.  An interrupt fires
+	 * whenever a bit is high, not just at edges.
+	 */
+	irq_flow_handler_t handle = handle_level_irq;
+	if (tile_irq_type == TILE_IRQ_PERCPU)
+		handle = handle_percpu_irq;
+	set_irq_chip_and_handler(irq, &tile_irq_chip, handle);
+
+	/*
+	 * Flag interrupts that are hardware-cleared so that ack()
+	 * won't clear them.
+	 */
+	if (tile_irq_type == TILE_IRQ_HW_CLEAR)
+		set_irq_chip_data(irq, (void *)IS_HW_CLEARED);
+}
+EXPORT_SYMBOL(tile_irq_activate);
+
+
+void ack_bad_irq(unsigned int irq)
+{
+	pr_err("unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * Generic, controller-independent functions:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v, j;
+	struct irqaction *action;
+	unsigned long flags;
+
+	if (i == 0) {
+		seq_printf(p, "           ");
+		for (j = 0; j < NR_CPUS; j++)
+			if (cpu_online(j))
+				seq_printf(p, "CPU%-8d", j);
+		seq_putc(p, '\n');
+	}
+
+	if (i < NR_IRQS) {
+		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
+		if (!action)
+			goto skip;
+		seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+		for_each_online_cpu(j)
+			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#endif
+		seq_printf(p, " %14s", irq_desc[i].chip->typename);
+		seq_printf(p, "  %s", action->name);
+
+		for (action = action->next; action; action = action->next)
+			seq_printf(p, ", %s", action->name);
+
+		seq_putc(p, '\n');
+skip:
+		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+	}
+	return 0;
+}
+
+#if CHIP_HAS_IPI()
+int create_irq(void)
+{
+	unsigned long flags;
+	int result;
+
+	spin_lock_irqsave(&available_irqs_lock, flags);
+	if (available_irqs == 0)
+		result = -ENOMEM;
+	else {
+		result = __ffs(available_irqs);
+		available_irqs &= ~(1UL << result);
+		dynamic_irq_init(result);
+	}
+	spin_unlock_irqrestore(&available_irqs_lock, flags);
+
+	return result;
+}
+EXPORT_SYMBOL(create_irq);
+
+void destroy_irq(unsigned int irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&available_irqs_lock, flags);
+	available_irqs |= (1UL << irq);
+	dynamic_irq_cleanup(irq);
+	spin_unlock_irqrestore(&available_irqs_lock, flags);
+}
+EXPORT_SYMBOL(destroy_irq);
+#endif
diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c
new file mode 100644
index 00000000000..ba7a265d617
--- /dev/null
+++ b/arch/tile/kernel/machine_kexec.c
@@ -0,0 +1,279 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * based on machine_kexec.c from other architectures in linux-2.6.18
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/errno.h>
+#include <linux/vmalloc.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/highmem.h>
+#include <linux/mmu_context.h>
+#include <linux/io.h>
+#include <linux/timex.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/checksum.h>
+#include <hv/hypervisor.h>
+
+
+/*
+ * This stuff is not in elf.h and is not in any other kernel include.
+ * This stuff is needed below in the little boot notes parser to
+ * extract the command line so we can pass it to the hypervisor.
+ */
+struct Elf32_Bhdr {
+	Elf32_Word b_signature;
+	Elf32_Word b_size;
+	Elf32_Half b_checksum;
+	Elf32_Half b_records;
+};
+#define ELF_BOOT_MAGIC		0x0E1FB007
+#define EBN_COMMAND_LINE	0x00000004
+#define roundupsz(X) (((X) + 3) & ~3)
+
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+
+
+void machine_shutdown(void)
+{
+	/*
+	 * Normally we would stop all the other processors here, but
+	 * the check in machine_kexec_prepare below ensures we'll only
+	 * get this far if we've been booted with "nosmp" on the
+	 * command line or without CONFIG_SMP so there's nothing to do
+	 * here (for now).
+	 */
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	/*
+	 * Cannot happen.  This type of kexec is disabled on this
+	 * architecture (and enforced in machine_kexec_prepare below).
+	 */
+}
+
+
+int machine_kexec_prepare(struct kimage *image)
+{
+	if (num_online_cpus() > 1) {
+		pr_warning("%s: detected attempt to kexec "
+		       "with num_online_cpus() > 1\n",
+		       __func__);
+		return -ENOSYS;
+	}
+	if (image->type != KEXEC_TYPE_DEFAULT) {
+		pr_warning("%s: detected attempt to kexec "
+		       "with unsupported type: %d\n",
+		       __func__,
+		       image->type);
+		return -ENOSYS;
+	}
+	return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+	/*
+	 * We did nothing in machine_kexec_prepare,
+	 * so we have nothing to do here.
+	 */
+}
+
+/*
+ * If we can find elf boot notes on this page, return the command
+ * line.  Otherwise, silently return null.  Somewhat kludgy, but no
+ * good way to do this without significantly rearchitecting the
+ * architecture-independent kexec code.
+ */
+
+static unsigned char *kexec_bn2cl(void *pg)
+{
+	struct Elf32_Bhdr *bhdrp;
+	Elf32_Nhdr *nhdrp;
+	unsigned char *desc;
+	unsigned char *command_line;
+	__sum16 csum;
+
+	bhdrp = (struct Elf32_Bhdr *) pg;
+
+	/*
+	 * This routine is invoked for every source page, so make
+	 * sure to quietly ignore every impossible page.
+	 */
+	if (bhdrp->b_signature != ELF_BOOT_MAGIC ||
+	    bhdrp->b_size > PAGE_SIZE)
+		return 0;
+
+	/*
+	 * If we get a checksum mismatch, warn with the checksum
+	 * so we can diagnose better.
+	 */
+	csum = ip_compute_csum(pg, bhdrp->b_size);
+	if (csum != 0) {
+		pr_warning("%s: bad checksum %#x (size %d)\n",
+			   __func__, csum, bhdrp->b_size);
+		return 0;
+	}
+
+	nhdrp = (Elf32_Nhdr *) (bhdrp + 1);
+
+	while (nhdrp->n_type != EBN_COMMAND_LINE) {
+
+		desc = (unsigned char *) (nhdrp + 1);
+		desc += roundupsz(nhdrp->n_descsz);
+
+		nhdrp = (Elf32_Nhdr *) desc;
+
+		/* still in bounds? */
+		if ((unsigned char *) (nhdrp + 1) >
+		    ((unsigned char *) pg) + bhdrp->b_size) {
+
+			pr_info("%s: out of bounds\n", __func__);
+			return 0;
+		}
+	}
+
+	command_line = (unsigned char *) (nhdrp + 1);
+	desc = command_line;
+
+	while (*desc != '\0') {
+		desc++;
+		if (((unsigned long)desc & PAGE_MASK) != (unsigned long)pg) {
+			pr_info("%s: ran off end of page\n",
+			       __func__);
+			return 0;
+		}
+	}
+
+	return command_line;
+}
+
+static void kexec_find_and_set_command_line(struct kimage *image)
+{
+	kimage_entry_t *ptr, entry;
+
+	unsigned char *command_line = 0;
+	unsigned char *r;
+	HV_Errno hverr;
+
+	for (ptr = &image->head;
+	     (entry = *ptr) && !(entry & IND_DONE);
+	     ptr = (entry & IND_INDIRECTION) ?
+		     phys_to_virt((entry & PAGE_MASK)) : ptr + 1) {
+
+		if ((entry & IND_SOURCE)) {
+			void *va =
+				kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0);
+			r = kexec_bn2cl(va);
+			if (r) {
+				command_line = r;
+				break;
+			}
+			kunmap_atomic(va, KM_USER0);
+		}
+	}
+
+	if (command_line != 0) {
+		pr_info("setting new command line to \"%s\"\n",
+		       command_line);
+
+		hverr = hv_set_command_line(
+			(HV_VirtAddr) command_line, strlen(command_line));
+		kunmap_atomic(command_line, KM_USER0);
+	} else {
+		pr_info("%s: no command line found; making empty\n",
+		       __func__);
+		hverr = hv_set_command_line((HV_VirtAddr) command_line, 0);
+	}
+	if (hverr)
+		pr_warning("%s: hv_set_command_line returned error: %d\n",
+			   __func__, hverr);
+}
+
+/*
+ * The kexec code range-checks all its PAs, so to avoid having it run
+ * amok and allocate memory and then sequester it from every other
+ * controller, we force it to come from controller zero.  We also
+ * disable the oom-killer since if we do end up running out of memory,
+ * that almost certainly won't help.
+ */
+struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order)
+{
+	gfp_mask |= __GFP_THISNODE | __GFP_NORETRY;
+	return alloc_pages_node(0, gfp_mask, order);
+}
+
+static void setup_quasi_va_is_pa(void)
+{
+	HV_PTE *pgtable;
+	HV_PTE pte;
+	int i;
+
+	/*
+	 * Flush our TLB to prevent conflicts between the previous contents
+	 * and the new stuff we're about to add.
+	 */
+	local_flush_tlb_all();
+
+	/* setup VA is PA, at least up to PAGE_OFFSET */
+
+	pgtable = (HV_PTE *)current->mm->pgd;
+	pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE);
+	pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+
+	for (i = 0; i < pgd_index(PAGE_OFFSET); i++)
+		pgtable[i] = pfn_pte(i << (HPAGE_SHIFT - PAGE_SHIFT), pte);
+}
+
+
+NORET_TYPE void machine_kexec(struct kimage *image)
+{
+	void *reboot_code_buffer;
+	NORET_TYPE void (*rnk)(unsigned long, void *, unsigned long)
+		ATTRIB_NORET;
+
+	/* Mask all interrupts before starting to reboot. */
+	interrupt_mask_set_mask(~0ULL);
+
+	kexec_find_and_set_command_line(image);
+
+	/*
+	 * Adjust the home caching of the control page to be cached on
+	 * this cpu, and copy the assembly helper into the control
+	 * code page, which we map in the vmalloc area.
+	 */
+	homecache_change_page_home(image->control_code_page, 0,
+				   smp_processor_id());
+	reboot_code_buffer = vmap(&image->control_code_page, 1, 0,
+				  __pgprot(_PAGE_KERNEL | _PAGE_EXECUTABLE));
+	memcpy(reboot_code_buffer, relocate_new_kernel,
+	       relocate_new_kernel_size);
+	__flush_icache_range(
+		(unsigned long) reboot_code_buffer,
+		(unsigned long) reboot_code_buffer + relocate_new_kernel_size);
+
+	setup_quasi_va_is_pa();
+
+	/* now call it */
+	rnk = reboot_code_buffer;
+	(*rnk)(image->head, reboot_code_buffer, image->start);
+}
diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c
new file mode 100644
index 00000000000..6d23ed271d1
--- /dev/null
+++ b/arch/tile/kernel/messaging.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/hardirq.h>
+#include <linux/ptrace.h>
+#include <asm/hv_driver.h>
+#include <asm/irq_regs.h>
+#include <asm/traps.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+
+/* All messages are stored here */
+static DEFINE_PER_CPU(HV_MsgState, msg_state);
+
+void __cpuinit init_messaging(void)
+{
+	/* Allocate storage for messages in kernel space */
+	HV_MsgState *state = &__get_cpu_var(msg_state);
+	int rc = hv_register_message_state(state);
+	if (rc != HV_OK)
+		panic("hv_register_message_state: error %d", rc);
+
+	/* Make sure downcall interrupts will be enabled. */
+	raw_local_irq_unmask(INT_INTCTRL_1);
+}
+
+void hv_message_intr(struct pt_regs *regs, int intnum)
+{
+	/*
+	 * We enter with interrupts disabled and leave them disabled,
+	 * to match expectations of called functions (e.g.
+	 * do_ccupdate_local() in mm/slab.c).  This is also consistent
+	 * with normal call entry for device interrupts.
+	 */
+
+	int message[HV_MAX_MESSAGE_SIZE/sizeof(int)];
+	HV_RcvMsgInfo rmi;
+	int nmsgs = 0;
+
+	/* Track time spent here in an interrupt context */
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+	/* Debugging check for stack overflow: less than 1/8th stack free? */
+	{
+		long sp = stack_pointer - (long) current_thread_info();
+		if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+			pr_emerg("hv_message_intr: "
+			       "stack overflow: %ld\n",
+			       sp - sizeof(struct thread_info));
+			dump_stack();
+		}
+	}
+#endif
+
+	while (1) {
+		rmi = hv_receive_message(__get_cpu_var(msg_state),
+					 (HV_VirtAddr) message,
+					 sizeof(message));
+		if (rmi.msglen == 0)
+			break;
+
+		if (rmi.msglen < 0)
+			panic("hv_receive_message failed: %d", rmi.msglen);
+
+		++nmsgs;
+
+		if (rmi.source == HV_MSG_TILE) {
+			int tag;
+
+			/* we just send tags for now */
+			BUG_ON(rmi.msglen != sizeof(int));
+
+			tag = message[0];
+#ifdef CONFIG_SMP
+			evaluate_message(message[0]);
+#else
+			panic("Received IPI message %d in UP mode", tag);
+#endif
+		} else if (rmi.source == HV_MSG_INTR) {
+			HV_IntrMsg *him = (HV_IntrMsg *)message;
+			struct hv_driver_cb *cb =
+				(struct hv_driver_cb *)him->intarg;
+			cb->callback(cb, him->intdata);
+			__get_cpu_var(irq_stat).irq_hv_msg_count++;
+		}
+	}
+
+	/*
+	 * We shouldn't have gotten a message downcall with no
+	 * messages available.
+	 */
+	if (nmsgs == 0)
+		panic("Message downcall invoked with no messages!");
+
+	/*
+	 * Track time spent against the current process again and
+	 * process any softirqs if they are waiting.
+	 */
+	irq_exit();
+	set_irq_regs(old_regs);
+}
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
new file mode 100644
index 00000000000..e2ab82b7c7e
--- /dev/null
+++ b/arch/tile/kernel/module.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Based on i386 version, copyright (C) 2001 Rusty Russell.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/opcode-tile.h>
+#include <asm/pgtable.h>
+
+#ifdef __tilegx__
+# define Elf_Rela Elf64_Rela
+# define ELF_R_SYM ELF64_R_SYM
+# define ELF_R_TYPE ELF64_R_TYPE
+#else
+# define Elf_Rela Elf32_Rela
+# define ELF_R_SYM ELF32_R_SYM
+# define ELF_R_TYPE ELF32_R_TYPE
+#endif
+
+#ifdef MODULE_DEBUG
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+/*
+ * Allocate some address space in the range MEM_MODULE_START to
+ * MEM_MODULE_END and populate it with memory.
+ */
+void *module_alloc(unsigned long size)
+{
+	struct page **pages;
+	pgprot_t prot_rwx = __pgprot(_PAGE_KERNEL | _PAGE_KERNEL_EXEC);
+	struct vm_struct *area;
+	int i = 0;
+	int npages;
+
+	if (size == 0)
+		return NULL;
+	npages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+	pages = kmalloc(npages * sizeof(struct page *), GFP_KERNEL);
+	if (pages == NULL)
+		return NULL;
+	for (; i < npages; ++i) {
+		pages[i] = alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
+		if (!pages[i])
+			goto error;
+	}
+
+	area = __get_vm_area(size, VM_ALLOC, MEM_MODULE_START, MEM_MODULE_END);
+	if (!area)
+		goto error;
+
+	if (map_vm_area(area, prot_rwx, &pages)) {
+		vunmap(area->addr);
+		goto error;
+	}
+
+	return area->addr;
+
+error:
+	while (--i >= 0)
+		__free_page(pages[i]);
+	kfree(pages);
+	return NULL;
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/*
+	 * FIXME: If module_region == mod->init_region, trim exception
+	 * table entries.
+	 */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+			      Elf_Shdr *sechdrs,
+			      char *secstrings,
+			      struct module *mod)
+{
+	return 0;
+}
+
+int apply_relocate(Elf_Shdr *sechdrs,
+		   const char *strtab,
+		   unsigned int symindex,
+		   unsigned int relsec,
+		   struct module *me)
+{
+	pr_err("module %s: .rel relocation unsupported\n", me->name);
+	return -ENOEXEC;
+}
+
+#ifdef __tilegx__
+/*
+ * Validate that the high 16 bits of "value" is just the sign-extension of
+ * the low 48 bits.
+ */
+static int validate_hw2_last(long value, struct module *me)
+{
+	if (((value << 16) >> 16) != value) {
+		pr_warning("module %s: Out of range HW2_LAST value %#lx\n",
+			   me->name, value);
+		return 0;
+	}
+	return 1;
+}
+
+/*
+ * Validate that "value" isn't too big to hold in a JumpOff relocation.
+ */
+static int validate_jumpoff(long value)
+{
+	/* Determine size of jump offset. */
+	int shift = __builtin_clzl(get_JumpOff_X1(create_JumpOff_X1(-1)));
+
+	/* Check to see if it fits into the relocation slot. */
+	long f = get_JumpOff_X1(create_JumpOff_X1(value));
+	f = (f << shift) >> shift;
+
+	return f == value;
+}
+#endif
+
+int apply_relocate_add(Elf_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	unsigned int i;
+	Elf_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+	Elf_Sym *sym;
+	u64 *location;
+	unsigned long value;
+
+	DEBUGP("Applying relocate section %u to %u\n", relsec,
+	       sechdrs[relsec].sh_info);
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* This is where to make the change */
+		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+		/*
+		 * This is the symbol it is referring to.
+		 * Note that all undefined symbols have been resolved.
+		 */
+		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+			+ ELF_R_SYM(rel[i].r_info);
+		value = sym->st_value + rel[i].r_addend;
+
+		switch (ELF_R_TYPE(rel[i].r_info)) {
+
+#define MUNGE(func) (*location = ((*location & ~func(-1)) | func(value)))
+
+#ifndef __tilegx__
+		case R_TILE_32:
+			*(uint32_t *)location = value;
+			break;
+		case R_TILE_IMM16_X0_HA:
+			value = (value + 0x8000) >> 16;
+			/*FALLTHROUGH*/
+		case R_TILE_IMM16_X0_LO:
+			MUNGE(create_Imm16_X0);
+			break;
+		case R_TILE_IMM16_X1_HA:
+			value = (value + 0x8000) >> 16;
+			/*FALLTHROUGH*/
+		case R_TILE_IMM16_X1_LO:
+			MUNGE(create_Imm16_X1);
+			break;
+		case R_TILE_JOFFLONG_X1:
+			value -= (unsigned long) location;  /* pc-relative */
+			value = (long) value >> 3;     /* count by instrs */
+			MUNGE(create_JOffLong_X1);
+			break;
+#else
+		case R_TILEGX_64:
+			*location = value;
+			break;
+		case R_TILEGX_IMM16_X0_HW2_LAST:
+			if (!validate_hw2_last(value, me))
+				return -ENOEXEC;
+			value >>= 16;
+			/*FALLTHROUGH*/
+		case R_TILEGX_IMM16_X0_HW1:
+			value >>= 16;
+			/*FALLTHROUGH*/
+		case R_TILEGX_IMM16_X0_HW0:
+			MUNGE(create_Imm16_X0);
+			break;
+		case R_TILEGX_IMM16_X1_HW2_LAST:
+			if (!validate_hw2_last(value, me))
+				return -ENOEXEC;
+			value >>= 16;
+			/*FALLTHROUGH*/
+		case R_TILEGX_IMM16_X1_HW1:
+			value >>= 16;
+			/*FALLTHROUGH*/
+		case R_TILEGX_IMM16_X1_HW0:
+			MUNGE(create_Imm16_X1);
+			break;
+		case R_TILEGX_JUMPOFF_X1:
+			value -= (unsigned long) location;  /* pc-relative */
+			value = (long) value >> 3;     /* count by instrs */
+			if (!validate_jumpoff(value)) {
+				pr_warning("module %s: Out of range jump to"
+					   " %#llx at %#llx (%p)\n", me->name,
+					   sym->st_value + rel[i].r_addend,
+					   rel[i].r_offset, location);
+				return -ENOEXEC;
+			}
+			MUNGE(create_JumpOff_X1);
+			break;
+#endif
+
+#undef MUNGE
+
+		default:
+			pr_err("module %s: Unknown relocation: %d\n",
+			       me->name, (int) ELF_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	/* FIXME: perhaps remove the "writable" bit from the TLB? */
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
new file mode 100644
index 00000000000..5ad5e13b0fa
--- /dev/null
+++ b/arch/tile/kernel/pci-dma.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+/* Generic DMA mapping functions: */
+
+/*
+ * Allocate what Linux calls "coherent" memory, which for us just
+ * means uncached.
+ */
+void *dma_alloc_coherent(struct device *dev,
+			 size_t size,
+			 dma_addr_t *dma_handle,
+			 gfp_t gfp)
+{
+	u64 dma_mask = dev->coherent_dma_mask ?: DMA_BIT_MASK(32);
+	int node = dev_to_node(dev);
+	int order = get_order(size);
+	struct page *pg;
+	dma_addr_t addr;
+
+	gfp |= __GFP_ZERO;
+
+	/*
+	 * By forcing NUMA node 0 for 32-bit masks we ensure that the
+	 * high 32 bits of the resulting PA will be zero.  If the mask
+	 * size is, e.g., 24, we may still not be able to guarantee a
+	 * suitable memory address, in which case we will return NULL.
+	 * But such devices are uncommon.
+	 */
+	if (dma_mask <= DMA_BIT_MASK(32))
+		node = 0;
+
+	pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_UNCACHED);
+	if (pg == NULL)
+		return NULL;
+
+	addr = page_to_phys(pg);
+	if (addr + size > dma_mask) {
+		homecache_free_pages(addr, order);
+		return NULL;
+	}
+
+	*dma_handle = addr;
+	return page_address(pg);
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Free memory that was allocated with dma_alloc_coherent.
+ */
+void dma_free_coherent(struct device *dev, size_t size,
+		  void *vaddr, dma_addr_t dma_handle)
+{
+	homecache_free_pages((unsigned long)vaddr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * The map routines "map" the specified address range for DMA
+ * accesses.  The memory belongs to the device after this call is
+ * issued, until it is unmapped with dma_unmap_single.
+ *
+ * We don't need to do any mapping, we just flush the address range
+ * out of the cache and return a DMA address.
+ *
+ * The unmap routines do whatever is necessary before the processor
+ * accesses the memory again, and must be called before the driver
+ * touches the memory.  We can get away with a cache invalidate if we
+ * can count on nothing having been touched.
+ */
+
+
+/*
+ * dma_map_single can be passed any memory address, and there appear
+ * to be no alignment constraints.
+ *
+ * There is a chance that the start of the buffer will share a cache
+ * line with some other data that has been touched in the meantime.
+ */
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	struct page *page;
+	dma_addr_t dma_addr;
+	int thispage;
+
+	BUG_ON(!valid_dma_direction(direction));
+	WARN_ON(size == 0);
+
+	dma_addr = __pa(ptr);
+
+	/* We might have been handed a buffer that wraps a page boundary */
+	while ((int)size > 0) {
+		/* The amount to flush that's on this page */
+		thispage = PAGE_SIZE - ((unsigned long)ptr & (PAGE_SIZE - 1));
+		thispage = min((int)thispage, (int)size);
+		/* Is this valid for any page we could be handed? */
+		page = pfn_to_page(kaddr_to_pfn(ptr));
+		homecache_flush_cache(page, 0);
+		ptr += thispage;
+		size -= thispage;
+	}
+
+	return dma_addr;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+	   enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(!valid_dma_direction(direction));
+
+	WARN_ON(nents == 0 || sglist->length == 0);
+
+	for_each_sg(sglist, sg, nents, i) {
+		struct page *page;
+		sg->dma_address = sg_phys(sg);
+		page = pfn_to_page(sg->dma_address >> PAGE_SHIFT);
+		homecache_flush_cache(page, 0);
+	}
+
+	return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+
+	homecache_flush_cache(page, 0);
+
+	return page_to_pa(page) + offset;
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			     size_t size, enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+	unsigned long start = PFN_DOWN(dma_handle);
+	unsigned long end = PFN_DOWN(dma_handle + size - 1);
+	unsigned long i;
+
+	BUG_ON(!valid_dma_direction(direction));
+	for (i = start; i <= end; ++i)
+		homecache_flush_cache(pfn_to_page(i), 0);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+	WARN_ON(nelems == 0 || sg[0].length == 0);
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+/*
+ * Flush and invalidate cache for scatterlist.
+ */
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
+			    int nelems, enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(!valid_dma_direction(direction));
+	WARN_ON(nelems == 0 || sglist->length == 0);
+
+	for_each_sg(sglist, sg, nelems, i) {
+		dma_sync_single_for_device(dev, sg->dma_address,
+					   sg_dma_len(sg), direction);
+	}
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle + offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev,
+				      dma_addr_t dma_handle,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle + offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+/*
+ * dma_alloc_noncoherent() returns non-cacheable memory, so there's no
+ * need to do any flushing here.
+ */
+void dma_cache_sync(void *vaddr, size_t size,
+		    enum dma_data_direction direction)
+{
+}
+EXPORT_SYMBOL(dma_cache_sync);
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
new file mode 100644
index 00000000000..92ef925d2f8
--- /dev/null
+++ b/arch/tile/kernel/proc.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/smp.h>
+#include <linux/seq_file.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+#include <linux/hardirq.h>
+#include <linux/mman.h>
+#include <linux/smp.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/homecache.h>
+#include <arch/chip.h>
+
+
+/*
+ * Support /proc/cpuinfo
+ */
+
+#define cpu_to_ptr(n) ((void *)((long)(n)+1))
+#define ptr_to_cpu(p) ((long)(p) - 1)
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	int n = ptr_to_cpu(v);
+
+	if (n == 0) {
+		char buf[NR_CPUS*5];
+		cpulist_scnprintf(buf, sizeof(buf), cpu_online_mask);
+		seq_printf(m, "cpu count\t: %d\n", num_online_cpus());
+		seq_printf(m, "cpu list\t: %s\n", buf);
+		seq_printf(m, "model name\t: %s\n", chip_model);
+		seq_printf(m, "flags\t\t:\n");  /* nothing for now */
+		seq_printf(m, "cpu MHz\t\t: %llu.%06llu\n",
+			   get_clock_rate() / 1000000,
+			   (get_clock_rate() % 1000000));
+		seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
+			   loops_per_jiffy/(500000/HZ),
+			   (loops_per_jiffy/(5000/HZ)) % 100);
+	}
+
+#ifdef CONFIG_SMP
+	if (!cpu_online(n))
+		return 0;
+#endif
+
+	seq_printf(m, "processor\t: %d\n", n);
+
+	/* Print only num_online_cpus() blank lines total. */
+	if (cpumask_next(n, cpu_online_mask) < nr_cpu_ids)
+		seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
new file mode 100644
index 00000000000..ed590ad0acd
--- /dev/null
+++ b/arch/tile/kernel/process.c
@@ -0,0 +1,671 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/preempt.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/kprobes.h>
+#include <linux/elfcore.h>
+#include <linux/tick.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/compat.h>
+#include <linux/hardirq.h>
+#include <linux/syscalls.h>
+#include <linux/kernel.h>
+#include <asm/system.h>
+#include <asm/stack.h>
+#include <asm/homecache.h>
+#include <asm/syscalls.h>
+#ifdef CONFIG_HARDWALL
+#include <asm/hardwall.h>
+#endif
+#include <arch/chip.h>
+#include <arch/abi.h>
+
+
+/*
+ * Use the (x86) "idle=poll" option to prefer low latency when leaving the
+ * idle loop over low power while in the idle loop, e.g. if we have
+ * one thread per core and we want to get threads out of futex waits fast.
+ */
+static int no_idle_nap;
+static int __init idle_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!strcmp(str, "poll")) {
+		pr_info("using polling idle threads.\n");
+		no_idle_nap = 1;
+	} else if (!strcmp(str, "halt"))
+		no_idle_nap = 0;
+	else
+		return -1;
+
+	return 0;
+}
+early_param("idle", idle_setup);
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+	int cpu = smp_processor_id();
+
+
+	current_thread_info()->status |= TS_POLLING;
+
+	if (no_idle_nap) {
+		while (1) {
+			while (!need_resched())
+				cpu_relax();
+			schedule();
+		}
+	}
+
+	/* endless idle loop with no priority at all */
+	while (1) {
+		tick_nohz_stop_sched_tick(1);
+		while (!need_resched()) {
+			if (cpu_is_offline(cpu))
+				BUG();  /* no HOTPLUG_CPU */
+
+			local_irq_disable();
+			__get_cpu_var(irq_stat).idle_timestamp = jiffies;
+			current_thread_info()->status &= ~TS_POLLING;
+			/*
+			 * TS_POLLING-cleared state must be visible before we
+			 * test NEED_RESCHED:
+			 */
+			smp_mb();
+
+			if (!need_resched())
+				_cpu_idle();
+			else
+				local_irq_enable();
+			current_thread_info()->status |= TS_POLLING;
+		}
+		tick_nohz_restart_sched_tick();
+		preempt_enable_no_resched();
+		schedule();
+		preempt_disable();
+	}
+}
+
+struct thread_info *alloc_thread_info(struct task_struct *task)
+{
+	struct page *page;
+	gfp_t flags = GFP_KERNEL;
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+	flags |= __GFP_ZERO;
+#endif
+
+	page = alloc_pages(flags, THREAD_SIZE_ORDER);
+	if (!page)
+		return NULL;
+
+	return (struct thread_info *)page_address(page);
+}
+
+/*
+ * Free a thread_info node, and all of its derivative
+ * data structures.
+ */
+void free_thread_info(struct thread_info *info)
+{
+	struct single_step_state *step_state = info->step_state;
+
+#ifdef CONFIG_HARDWALL
+	/*
+	 * We free a thread_info from the context of the task that has
+	 * been scheduled next, so the original task is already dead.
+	 * Calling deactivate here just frees up the data structures.
+	 * If the task we're freeing held the last reference to a
+	 * hardwall fd, it would have been released prior to this point
+	 * anyway via exit_files(), and "hardwall" would be NULL by now.
+	 */
+	if (info->task->thread.hardwall)
+		hardwall_deactivate(info->task);
+#endif
+
+	if (step_state) {
+
+		/*
+		 * FIXME: we don't munmap step_state->buffer
+		 * because the mm_struct for this process (info->task->mm)
+		 * has already been zeroed in exit_mm().  Keeping a
+		 * reference to it here seems like a bad move, so this
+		 * means we can't munmap() the buffer, and therefore if we
+		 * ptrace multiple threads in a process, we will slowly
+		 * leak user memory.  (Note that as soon as the last
+		 * thread in a process dies, we will reclaim all user
+		 * memory including single-step buffers in the usual way.)
+		 * We should either assign a kernel VA to this buffer
+		 * somehow, or we should associate the buffer(s) with the
+		 * mm itself so we can clean them up that way.
+		 */
+		kfree(step_state);
+	}
+
+	free_page((unsigned long)info);
+}
+
+static void save_arch_state(struct thread_struct *t);
+
+int copy_thread(unsigned long clone_flags, unsigned long sp,
+		unsigned long stack_size,
+		struct task_struct *p, struct pt_regs *regs)
+{
+	struct pt_regs *childregs;
+	unsigned long ksp;
+
+	/*
+	 * When creating a new kernel thread we pass sp as zero.
+	 * Assign it to a reasonable value now that we have the stack.
+	 */
+	if (sp == 0 && regs->ex1 == PL_ICS_EX1(KERNEL_PL, 0))
+		sp = KSTK_TOP(p);
+
+	/*
+	 * Do not clone step state from the parent; each thread
+	 * must make its own lazily.
+	 */
+	task_thread_info(p)->step_state = NULL;
+
+	/*
+	 * Start new thread in ret_from_fork so it schedules properly
+	 * and then return from interrupt like the parent.
+	 */
+	p->thread.pc = (unsigned long) ret_from_fork;
+
+	/* Save user stack top pointer so we can ID the stack vm area later. */
+	p->thread.usp0 = sp;
+
+	/* Record the pid of the process that created this one. */
+	p->thread.creator_pid = current->pid;
+
+	/*
+	 * Copy the registers onto the kernel stack so the
+	 * return-from-interrupt code will reload it into registers.
+	 */
+	childregs = task_pt_regs(p);
+	*childregs = *regs;
+	childregs->regs[0] = 0;         /* return value is zero */
+	childregs->sp = sp;  /* override with new user stack pointer */
+
+	/*
+	 * Copy the callee-saved registers from the passed pt_regs struct
+	 * into the context-switch callee-saved registers area.
+	 * We have to restore the callee-saved registers since we may
+	 * be cloning a userspace task with userspace register state,
+	 * and we won't be unwinding the same kernel frames to restore them.
+	 * Zero out the C ABI save area to mark the top of the stack.
+	 */
+	ksp = (unsigned long) childregs;
+	ksp -= C_ABI_SAVE_AREA_SIZE;   /* interrupt-entry save area */
+	((long *)ksp)[0] = ((long *)ksp)[1] = 0;
+	ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long);
+	memcpy((void *)ksp, &regs->regs[CALLEE_SAVED_FIRST_REG],
+	       CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long));
+	ksp -= C_ABI_SAVE_AREA_SIZE;   /* __switch_to() save area */
+	((long *)ksp)[0] = ((long *)ksp)[1] = 0;
+	p->thread.ksp = ksp;
+
+#if CHIP_HAS_TILE_DMA()
+	/*
+	 * No DMA in the new thread.  We model this on the fact that
+	 * fork() clears the pending signals, alarms, and aio for the child.
+	 */
+	memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state));
+	memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb));
+#endif
+
+#if CHIP_HAS_SN_PROC()
+	/* Likewise, the new thread is not running static processor code. */
+	p->thread.sn_proc_running = 0;
+	memset(&p->thread.sn_async_tlb, 0, sizeof(struct async_tlb));
+#endif
+
+#if CHIP_HAS_PROC_STATUS_SPR()
+	/* New thread has its miscellaneous processor state bits clear. */
+	p->thread.proc_status = 0;
+#endif
+
+#ifdef CONFIG_HARDWALL
+	/* New thread does not own any networks. */
+	p->thread.hardwall = NULL;
+#endif
+
+
+	/*
+	 * Start the new thread with the current architecture state
+	 * (user interrupt masks, etc.).
+	 */
+	save_arch_state(&p->thread);
+
+	return 0;
+}
+
+/*
+ * Return "current" if it looks plausible, or else a pointer to a dummy.
+ * This can be helpful if we are just trying to emit a clean panic.
+ */
+struct task_struct *validate_current(void)
+{
+	static struct task_struct corrupt = { .comm = "<corrupt>" };
+	struct task_struct *tsk = current;
+	if (unlikely((unsigned long)tsk < PAGE_OFFSET ||
+		     (void *)tsk > high_memory ||
+		     ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) {
+		pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer);
+		tsk = &corrupt;
+	}
+	return tsk;
+}
+
+/* Take and return the pointer to the previous task, for schedule_tail(). */
+struct task_struct *sim_notify_fork(struct task_struct *prev)
+{
+	struct task_struct *tsk = current;
+	__insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT |
+		     (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS));
+	__insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK |
+		     (tsk->pid << _SIM_CONTROL_OPERATOR_BITS));
+	return prev;
+}
+
+int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+	struct pt_regs *ptregs = task_pt_regs(tsk);
+	elf_core_copy_regs(regs, ptregs);
+	return 1;
+}
+
+#if CHIP_HAS_TILE_DMA()
+
+/* Allow user processes to access the DMA SPRs */
+void grant_dma_mpls(void)
+{
+	__insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1);
+	__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1);
+}
+
+/* Forbid user processes from accessing the DMA SPRs */
+void restrict_dma_mpls(void)
+{
+	__insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
+	__insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+}
+
+/* Pause the DMA engine, then save off its state registers. */
+static void save_tile_dma_state(struct tile_dma_state *dma)
+{
+	unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS);
+	unsigned long post_suspend_state;
+
+	/* If we're running, suspend the engine. */
+	if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK)
+		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
+
+	/*
+	 * Wait for the engine to idle, then save regs.  Note that we
+	 * want to record the "running" bit from before suspension,
+	 * and the "done" bit from after, so that we can properly
+	 * distinguish a case where the user suspended the engine from
+	 * the case where the kernel suspended as part of the context
+	 * swap.
+	 */
+	do {
+		post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS);
+	} while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK);
+
+	dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR);
+	dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR);
+	dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR);
+	dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR);
+	dma->strides = __insn_mfspr(SPR_DMA_STRIDE);
+	dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE);
+	dma->byte = __insn_mfspr(SPR_DMA_BYTE);
+	dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) |
+		(post_suspend_state & SPR_DMA_STATUS__DONE_MASK);
+}
+
+/* Restart a DMA that was running before we were context-switched out. */
+static void restore_tile_dma_state(struct thread_struct *t)
+{
+	const struct tile_dma_state *dma = &t->tile_dma_state;
+
+	/*
+	 * The only way to restore the done bit is to run a zero
+	 * length transaction.
+	 */
+	if ((dma->status & SPR_DMA_STATUS__DONE_MASK) &&
+	    !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) {
+		__insn_mtspr(SPR_DMA_BYTE, 0);
+		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+		while (__insn_mfspr(SPR_DMA_USER_STATUS) &
+		       SPR_DMA_STATUS__BUSY_MASK)
+			;
+	}
+
+	__insn_mtspr(SPR_DMA_SRC_ADDR, dma->src);
+	__insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk);
+	__insn_mtspr(SPR_DMA_DST_ADDR, dma->dest);
+	__insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk);
+	__insn_mtspr(SPR_DMA_STRIDE, dma->strides);
+	__insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size);
+	__insn_mtspr(SPR_DMA_BYTE, dma->byte);
+
+	/*
+	 * Restart the engine if we were running and not done.
+	 * Clear a pending async DMA fault that we were waiting on return
+	 * to user space to execute, since we expect the DMA engine
+	 * to regenerate those faults for us now.  Note that we don't
+	 * try to clear the TIF_ASYNC_TLB flag, since it's relatively
+	 * harmless if set, and it covers both DMA and the SN processor.
+	 */
+	if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) {
+		t->dma_async_tlb.fault_num = 0;
+		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+	}
+}
+
+#endif
+
+static void save_arch_state(struct thread_struct *t)
+{
+#if CHIP_HAS_SPLIT_INTR_MASK()
+	t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) |
+		((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32);
+#else
+	t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0);
+#endif
+	t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0);
+	t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1);
+	t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0);
+	t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1);
+	t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2);
+	t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3);
+	t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS);
+#if CHIP_HAS_PROC_STATUS_SPR()
+	t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
+#endif
+}
+
+static void restore_arch_state(const struct thread_struct *t)
+{
+#if CHIP_HAS_SPLIT_INTR_MASK()
+	__insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask);
+	__insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32);
+#else
+	__insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask);
+#endif
+	__insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]);
+	__insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]);
+	__insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]);
+	__insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]);
+	__insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]);
+	__insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]);
+	__insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0);
+#if CHIP_HAS_PROC_STATUS_SPR()
+	__insn_mtspr(SPR_PROC_STATUS, t->proc_status);
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+	/*
+	 * Clear this whenever we switch back to a process in case
+	 * the previous process was monkeying with it.  Even if enabled
+	 * in CBOX_MSR1 via TILE_RTF_HWM_MIN, it's still just a
+	 * performance hint, so isn't worth a full save/restore.
+	 */
+	__insn_mtspr(SPR_TILE_RTF_HWM, 0);
+#endif
+}
+
+
+void _prepare_arch_switch(struct task_struct *next)
+{
+#if CHIP_HAS_SN_PROC()
+	int snctl;
+#endif
+#if CHIP_HAS_TILE_DMA()
+	struct tile_dma_state *dma = &current->thread.tile_dma_state;
+	if (dma->enabled)
+		save_tile_dma_state(dma);
+#endif
+#if CHIP_HAS_SN_PROC()
+	/*
+	 * Suspend the static network processor if it was running.
+	 * We do not suspend the fabric itself, just like we don't
+	 * try to suspend the UDN.
+	 */
+	snctl = __insn_mfspr(SPR_SNCTL);
+	current->thread.sn_proc_running =
+		(snctl & SPR_SNCTL__FRZPROC_MASK) == 0;
+	if (current->thread.sn_proc_running)
+		__insn_mtspr(SPR_SNCTL, snctl | SPR_SNCTL__FRZPROC_MASK);
+#endif
+}
+
+
+struct task_struct *__sched _switch_to(struct task_struct *prev,
+				       struct task_struct *next)
+{
+	/* DMA state is already saved; save off other arch state. */
+	save_arch_state(&prev->thread);
+
+#if CHIP_HAS_TILE_DMA()
+	/*
+	 * Restore DMA in new task if desired.
+	 * Note that it is only safe to restart here since interrupts
+	 * are disabled, so we can't take any DMATLB miss or access
+	 * interrupts before we have finished switching stacks.
+	 */
+	if (next->thread.tile_dma_state.enabled) {
+		restore_tile_dma_state(&next->thread);
+		grant_dma_mpls();
+	} else {
+		restrict_dma_mpls();
+	}
+#endif
+
+	/* Restore other arch state. */
+	restore_arch_state(&next->thread);
+
+#if CHIP_HAS_SN_PROC()
+	/*
+	 * Restart static network processor in the new process
+	 * if it was running before.
+	 */
+	if (next->thread.sn_proc_running) {
+		int snctl = __insn_mfspr(SPR_SNCTL);
+		__insn_mtspr(SPR_SNCTL, snctl & ~SPR_SNCTL__FRZPROC_MASK);
+	}
+#endif
+
+#ifdef CONFIG_HARDWALL
+	/* Enable or disable access to the network registers appropriately. */
+	if (prev->thread.hardwall != NULL) {
+		if (next->thread.hardwall == NULL)
+			restrict_network_mpls();
+	} else if (next->thread.hardwall != NULL) {
+		grant_network_mpls();
+	}
+#endif
+
+	/*
+	 * Switch kernel SP, PC, and callee-saved registers.
+	 * In the context of the new task, return the old task pointer
+	 * (i.e. the task that actually called __switch_to).
+	 * Pass the value to use for SYSTEM_SAVE_1_0 when we reset our sp.
+	 */
+	return __switch_to(prev, next, next_current_ksp0(next));
+}
+
+long _sys_fork(struct pt_regs *regs)
+{
+	return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
+}
+
+long _sys_clone(unsigned long clone_flags, unsigned long newsp,
+		void __user *parent_tidptr, void __user *child_tidptr,
+		struct pt_regs *regs)
+{
+	if (!newsp)
+		newsp = regs->sp;
+	return do_fork(clone_flags, newsp, regs, 0,
+		       parent_tidptr, child_tidptr);
+}
+
+long _sys_vfork(struct pt_regs *regs)
+{
+	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp,
+		       regs, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+long _sys_execve(char __user *path, char __user *__user *argv,
+		 char __user *__user *envp, struct pt_regs *regs)
+{
+	long error;
+	char *filename;
+
+	filename = getname(path);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = do_execve(filename, argv, envp, regs);
+	putname(filename);
+out:
+	return error;
+}
+
+#ifdef CONFIG_COMPAT
+long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+			compat_uptr_t __user *envp, struct pt_regs *regs)
+{
+	long error;
+	char *filename;
+
+	filename = getname(path);
+	error = PTR_ERR(filename);
+	if (IS_ERR(filename))
+		goto out;
+	error = compat_do_execve(filename, argv, envp, regs);
+	putname(filename);
+out:
+	return error;
+}
+#endif
+
+unsigned long get_wchan(struct task_struct *p)
+{
+	struct KBacktraceIterator kbt;
+
+	if (!p || p == current || p->state == TASK_RUNNING)
+		return 0;
+
+	for (KBacktraceIterator_init(&kbt, p, NULL);
+	     !KBacktraceIterator_end(&kbt);
+	     KBacktraceIterator_next(&kbt)) {
+		if (!in_sched_functions(kbt.it.pc))
+			return kbt.it.pc;
+	}
+
+	return 0;
+}
+
+/*
+ * We pass in lr as zero (cleared in kernel_thread) and the caller
+ * part of the backtrace ABI on the stack also zeroed (in copy_thread)
+ * so that backtraces will stop with this function.
+ * Note that we don't use r0, since copy_thread() clears it.
+ */
+static void start_kernel_thread(int dummy, int (*fn)(int), int arg)
+{
+	do_exit(fn(arg));
+}
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+	struct pt_regs regs;
+
+	memset(&regs, 0, sizeof(regs));
+	regs.ex1 = PL_ICS_EX1(KERNEL_PL, 0);  /* run at kernel PL, no ICS */
+	regs.pc = (long) start_kernel_thread;
+	regs.flags = PT_FLAGS_CALLER_SAVES;   /* need to restore r1 and r2 */
+	regs.regs[1] = (long) fn;             /* function pointer */
+	regs.regs[2] = (long) arg;            /* parameter register */
+
+	/* Ok, create the new process.. */
+	return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs,
+		       0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+/* Flush thread state. */
+void flush_thread(void)
+{
+	/* Nothing */
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+	/* Nothing */
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	struct task_struct *tsk = validate_current();
+	int i;
+
+	pr_err("\n");
+	pr_err(" Pid: %d, comm: %20s, CPU: %d\n",
+	       tsk->pid, tsk->comm, smp_processor_id());
+#ifdef __tilegx__
+	for (i = 0; i < 51; i += 3)
+		pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
+		       i, regs->regs[i], i+1, regs->regs[i+1],
+		       i+2, regs->regs[i+2]);
+	pr_err(" r51: "REGFMT" r52: "REGFMT" tp : "REGFMT"\n",
+	       regs->regs[51], regs->regs[52], regs->tp);
+	pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr);
+#else
+	for (i = 0; i < 52; i += 3)
+		pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT
+		       " r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
+		       i, regs->regs[i], i+1, regs->regs[i+1],
+		       i+2, regs->regs[i+2], i+3, regs->regs[i+3]);
+	pr_err(" r52: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n",
+	       regs->regs[52], regs->tp, regs->sp, regs->lr);
+#endif
+	pr_err(" pc : "REGFMT" ex1: %ld     faultnum: %ld\n",
+	       regs->pc, regs->ex1, regs->faultnum);
+
+	dump_stack_regs(regs);
+}
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
new file mode 100644
index 00000000000..7161bd03d2f
--- /dev/null
+++ b/arch/tile/kernel/ptrace.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Copied from i386: Ross Biro 1/23/92
+ */
+
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/compat.h>
+#include <linux/uaccess.h>
+#include <asm/traps.h>
+
+void user_enable_single_step(struct task_struct *child)
+{
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+/*
+ * This routine will put a word on the process's privileged stack.
+ */
+static void putreg(struct task_struct *task,
+		   unsigned long addr, unsigned long value)
+{
+	unsigned int regno = addr / sizeof(unsigned long);
+	struct pt_regs *childregs = task_pt_regs(task);
+	childregs->regs[regno] = value;
+	childregs->flags |= PT_FLAGS_RESTORE_REGS;
+}
+
+static unsigned long getreg(struct task_struct *task, unsigned long addr)
+{
+	unsigned int regno = addr / sizeof(unsigned long);
+	struct pt_regs *childregs = task_pt_regs(task);
+	return childregs->regs[regno];
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+	/*
+	 * These two are currently unused, but will be set by arch_ptrace()
+	 * and used in the syscall assembly when we do support them.
+	 */
+	clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+	unsigned long __user *datap;
+	unsigned long tmp;
+	int i;
+	long ret = -EIO;
+
+#ifdef CONFIG_COMPAT
+	if (task_thread_info(current)->status & TS_COMPAT)
+		data = (u32)data;
+	if (task_thread_info(child)->status & TS_COMPAT)
+		addr = (u32)addr;
+#endif
+	datap = (unsigned long __user __force *)data;
+
+	switch (request) {
+
+	case PTRACE_PEEKUSR:  /* Read register from pt_regs. */
+		if (addr & (sizeof(data)-1))
+			break;
+		if (addr < 0 || addr >= PTREGS_SIZE)
+			break;
+		tmp = getreg(child, addr);   /* Read register */
+		ret = put_user(tmp, datap);
+		break;
+
+	case PTRACE_POKEUSR:  /* Write register in pt_regs. */
+		if (addr & (sizeof(data)-1))
+			break;
+		if (addr < 0 || addr >= PTREGS_SIZE)
+			break;
+		putreg(child, addr, data);   /* Write register */
+		ret = 0;
+		break;
+
+	case PTRACE_GETREGS:  /* Get all registers from the child. */
+		if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE))
+			break;
+		for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
+			ret = __put_user(getreg(child, i), datap);
+			if (ret != 0)
+				break;
+			datap++;
+		}
+		break;
+
+	case PTRACE_SETREGS:  /* Set all registers in the child. */
+		if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE))
+			break;
+		for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
+			ret = __get_user(tmp, datap);
+			if (ret != 0)
+				break;
+			putreg(child, i, tmp);
+			datap++;
+		}
+		break;
+
+	case PTRACE_GETFPREGS:  /* Get the child FPU state. */
+	case PTRACE_SETFPREGS:  /* Set the child FPU state. */
+		break;
+
+	case PTRACE_SETOPTIONS:
+		/* Support TILE-specific ptrace options. */
+		child->ptrace &= ~PT_TRACE_MASK_TILE;
+		tmp = data & PTRACE_O_MASK_TILE;
+		data &= ~PTRACE_O_MASK_TILE;
+		ret = ptrace_request(child, request, addr, data);
+		if (tmp & PTRACE_O_TRACEMIGRATE)
+			child->ptrace |= PT_TRACE_MIGRATE;
+		break;
+
+	default:
+#ifdef CONFIG_COMPAT
+		if (task_thread_info(current)->status & TS_COMPAT) {
+			ret = compat_ptrace_request(child, request,
+						    addr, data);
+			break;
+		}
+#endif
+		ret = ptrace_request(child, request, addr, data);
+		break;
+	}
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+/* Not used; we handle compat issues in arch_ptrace() directly. */
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			       compat_ulong_t addr, compat_ulong_t data)
+{
+	BUG();
+}
+#endif
+
+void do_syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+
+	/*
+	 * The 0x80 provides a way for the tracing parent to distinguish
+	 * between a syscall stop and SIGTRAP delivery
+	 */
+	ptrace_notify(SIGTRAP|((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use.  strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP.  -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+{
+	struct siginfo info;
+
+	memset(&info, 0, sizeof(info));
+	info.si_signo = SIGTRAP;
+	info.si_code  = TRAP_BRKPT;
+	info.si_addr  = (void __user *) regs->pc;
+
+	/* Send us the fakey SIGTRAP */
+	force_sig_info(SIGTRAP, &info, tsk);
+}
+
+/* Handle synthetic interrupt delivered only by the simulator. */
+void __kprobes do_breakpoint(struct pt_regs* regs, int fault_num)
+{
+	send_sigtrap(current, regs, fault_num);
+}
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
new file mode 100644
index 00000000000..acd86d20beb
--- /dev/null
+++ b/arch/tile/kernel/reboot.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/stddef.h>
+#include <linux/reboot.h>
+#include <linux/smp.h>
+#include <linux/pm.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <hv/hypervisor.h>
+
+#ifndef CONFIG_SMP
+#define smp_send_stop()
+#endif
+
+void machine_halt(void)
+{
+	warn_early_printk();
+	raw_local_irq_disable_all();
+	smp_send_stop();
+	hv_halt();
+}
+
+void machine_power_off(void)
+{
+	warn_early_printk();
+	raw_local_irq_disable_all();
+	smp_send_stop();
+	hv_power_off();
+}
+
+void machine_restart(char *cmd)
+{
+	raw_local_irq_disable_all();
+	smp_send_stop();
+	hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
+}
+
+/* No interesting distinction to be made here. */
+void (*pm_power_off)(void) = NULL;
diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S
new file mode 100644
index 00000000000..e88d6e12278
--- /dev/null
+++ b/arch/tile/kernel/regs_32.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <arch/spr_def.h>
+#include <asm/processor.h>
+
+/*
+ * See <asm/system.h>; called with prev and next task_struct pointers.
+ * "prev" is returned in r0 for _switch_to and also for ret_from_fork.
+ *
+ * We want to save pc/sp in "prev", and get the new pc/sp from "next".
+ * We also need to save all the callee-saved registers on the stack.
+ *
+ * Intel enables/disables access to the hardware cycle counter in
+ * seccomp (secure computing) environments if necessary, based on
+ * has_secure_computing().  We might want to do this at some point,
+ * though it would require virtualizing the other SPRs under WORLD_ACCESS.
+ *
+ * Since we're saving to the stack, we omit sp from this list.
+ * And for parallels with other architectures, we save lr separately,
+ * in the thread_struct itself (as the "pc" field).
+ *
+ * This code also needs to be aligned with process.c copy_thread()
+ */
+
+#if CALLEE_SAVED_REGS_COUNT != 24
+# error Mismatch between <asm/system.h> and kernel/entry.S
+#endif
+#define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 4)
+
+#define SAVE_REG(r) { sw r12, r; addi r12, r12, 4 }
+#define LOAD_REG(r) { lw r, r12; addi r12, r12, 4 }
+#define FOR_EACH_CALLEE_SAVED_REG(f)					\
+							f(r30); f(r31); \
+	f(r32); f(r33); f(r34); f(r35);	f(r36); f(r37); f(r38); f(r39); \
+	f(r40); f(r41); f(r42); f(r43); f(r44); f(r45); f(r46); f(r47); \
+	f(r48); f(r49); f(r50); f(r51); f(r52);
+
+STD_ENTRY_SECTION(__switch_to, .sched.text)
+	{
+	  move r10, sp
+	  sw sp, lr
+	  addi sp, sp, -FRAME_SIZE
+	}
+	{
+	  addi r11, sp, 4
+	  addi r12, sp, 8
+	}
+	{
+	  sw r11, r10
+	  addli r4, r1, TASK_STRUCT_THREAD_KSP_OFFSET
+	}
+	{
+	  lw r13, r4   /* Load new sp to a temp register early. */
+	  addli r3, r0, TASK_STRUCT_THREAD_KSP_OFFSET
+	}
+	FOR_EACH_CALLEE_SAVED_REG(SAVE_REG)
+	{
+	  sw r3, sp
+	  addli r3, r0, TASK_STRUCT_THREAD_PC_OFFSET
+	}
+	{
+	  sw r3, lr
+	  addli r4, r1, TASK_STRUCT_THREAD_PC_OFFSET
+	}
+	{
+	  lw lr, r4
+	  addi r12, r13, 8
+	}
+	{
+	  /* Update sp and ksp0 simultaneously to avoid backtracer warnings. */
+	  move sp, r13
+	  mtspr SYSTEM_SAVE_1_0, r2
+	}
+	FOR_EACH_CALLEE_SAVED_REG(LOAD_REG)
+.L__switch_to_pc:
+	{
+	  addi sp, sp, FRAME_SIZE
+	  jrp lr   /* r0 is still valid here, so return it */
+	}
+	STD_ENDPROC(__switch_to)
+
+/* Return a suitable address for the backtracer for suspended threads */
+STD_ENTRY_SECTION(get_switch_to_pc, .sched.text)
+	lnk r0
+	{
+	  addli r0, r0, .L__switch_to_pc - .
+	  jrp lr
+	}
+	STD_ENDPROC(get_switch_to_pc)
+
+STD_ENTRY(get_pt_regs)
+	.irp reg, r0, r1, r2, r3, r4, r5, r6, r7, \
+		 r8, r9, r10, r11, r12, r13, r14, r15, \
+		 r16, r17, r18, r19, r20, r21, r22, r23, \
+		 r24, r25, r26, r27, r28, r29, r30, r31, \
+		 r32, r33, r34, r35, r36, r37, r38, r39, \
+		 r40, r41, r42, r43, r44, r45, r46, r47, \
+		 r48, r49, r50, r51, r52, tp, sp
+	{
+	 sw r0, \reg
+	 addi r0, r0, 4
+	}
+	.endr
+	{
+	 sw r0, lr
+	 addi r0, r0, PTREGS_OFFSET_PC - PTREGS_OFFSET_LR
+	}
+	lnk r1
+	{
+	 sw r0, r1
+	 addi r0, r0, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+	}
+	mfspr r1, INTERRUPT_CRITICAL_SECTION
+	shli r1, r1, SPR_EX_CONTEXT_1_1__ICS_SHIFT
+	ori r1, r1, KERNEL_PL
+	{
+	 sw r0, r1
+	 addi r0, r0, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
+	}
+	{
+	 sw r0, zero       /* clear faultnum */
+	 addi r0, r0, PTREGS_OFFSET_ORIG_R0 - PTREGS_OFFSET_FAULTNUM
+	}
+	{
+	 sw r0, zero       /* clear orig_r0 */
+	 addli r0, r0, -PTREGS_OFFSET_ORIG_R0    /* restore r0 to base */
+	}
+	jrp lr
+	STD_ENDPROC(get_pt_regs)
diff --git a/arch/tile/kernel/relocate_kernel.S b/arch/tile/kernel/relocate_kernel.S
new file mode 100644
index 00000000000..010b418515f
--- /dev/null
+++ b/arch/tile/kernel/relocate_kernel.S
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * copy new kernel into place and then call hv_reexec
+ *
+ */
+
+#include <linux/linkage.h>
+#include <arch/chip.h>
+#include <asm/page.h>
+#include <hv/hypervisor.h>
+
+#define ___hvb	MEM_SV_INTRPT + HV_GLUE_START_CPA
+
+#define ___hv_dispatch(f) (___hvb + (HV_DISPATCH_ENTRY_SIZE * f))
+
+#define ___hv_console_putc ___hv_dispatch(HV_DISPATCH_CONSOLE_PUTC)
+#define ___hv_halt         ___hv_dispatch(HV_DISPATCH_HALT)
+#define ___hv_reexec       ___hv_dispatch(HV_DISPATCH_REEXEC)
+#define ___hv_flush_remote ___hv_dispatch(HV_DISPATCH_FLUSH_REMOTE)
+
+#undef RELOCATE_NEW_KERNEL_VERBOSE
+
+STD_ENTRY(relocate_new_kernel)
+
+	move	r30, r0		/* page list */
+	move	r31, r1		/* address of page we are on */
+	move	r32, r2		/* start address of new kernel */
+
+	shri	r1, r1, PAGE_SHIFT
+	addi	r1, r1, 1
+	shli	sp, r1, PAGE_SHIFT
+	addi	sp, sp, -8
+	/* we now have a stack (whether we need one or not) */
+
+	moveli	r40, lo16(___hv_console_putc)
+	auli	r40, r40, ha16(___hv_console_putc)
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 'r'
+	jalr	r40
+
+	moveli	r0, '_'
+	jalr	r40
+
+	moveli	r0, 'n'
+	jalr	r40
+
+	moveli	r0, '_'
+	jalr	r40
+
+	moveli	r0, 'k'
+	jalr	r40
+
+	moveli	r0, '\n'
+	jalr	r40
+#endif
+
+	/*
+	 * Throughout this code r30 is pointer to the element of page
+	 * list we are working on.
+	 *
+	 * Normally we get to the next element of the page list by
+	 * incrementing r30 by four.  The exception is if the element
+	 * on the page list is an IND_INDIRECTION in which case we use
+	 * the element with the low bits masked off as the new value
+	 * of r30.
+	 *
+	 * To get this started, we need the value passed to us (which
+	 * will always be an IND_INDIRECTION) in memory somewhere with
+	 * r30 pointing at it.  To do that, we push the value passed
+	 * to us on the stack and make r30 point to it.
+	 */
+
+	sw	sp, r30
+	move	r30, sp
+	addi	sp, sp, -8
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	/*
+	 * On TILEPro, we need to flush all tiles' caches, since we may
+	 * have been doing hash-for-home caching there.  Note that we
+	 * must do this _after_ we're completely done modifying any memory
+	 * other than our output buffer (which we know is locally cached).
+	 * We want the caches to be fully clean when we do the reexec,
+	 * because the hypervisor is going to do this flush again at that
+	 * point, and we don't want that second flush to overwrite any memory.
+	 */
+	{
+	 move	r0, zero	 /* cache_pa */
+	 move	r1, zero
+	}
+	{
+	 auli	r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */
+	 movei	r3, -1		 /* cache_cpumask; -1 means all client tiles */
+	}
+	{
+	 move	r4, zero	 /* tlb_va */
+	 move	r5, zero	 /* tlb_length */
+	}
+	{
+	 move	r6, zero	 /* tlb_pgsize */
+	 move	r7, zero	 /* tlb_cpumask */
+	}
+	{
+	 move	r8, zero	 /* asids */
+	 moveli	r20, lo16(___hv_flush_remote)
+	}
+	{
+	 move	r9, zero	 /* asidcount */
+	 auli	r20, r20, ha16(___hv_flush_remote)
+	}
+
+	jalr	r20
+#endif
+
+	/* r33 is destination pointer, default to zero */
+
+	moveli	r33, 0
+
+.Lloop:	lw	r10, r30
+
+	andi	r9, r10, 0xf	/* low 4 bits tell us what type it is */
+	xor	r10, r10, r9	/* r10 is now value with low 4 bits stripped */
+
+	seqi	r0, r9, 0x1	/* IND_DESTINATION */
+	bzt	r0, .Ltry2
+
+	move	r33, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 'd'
+	jalr	r40
+#endif
+
+	addi	r30, r30, 4
+	j	.Lloop
+
+.Ltry2:
+	seqi	r0, r9, 0x2	/* IND_INDIRECTION */
+	bzt	r0, .Ltry4
+
+	move	r30, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 'i'
+	jalr	r40
+#endif
+
+	j	.Lloop
+
+.Ltry4:
+	seqi	r0, r9, 0x4	/* IND_DONE */
+	bzt	r0, .Ltry8
+
+	mf
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 'D'
+	jalr	r40
+	moveli	r0, '\n'
+	jalr	r40
+#endif
+
+	move	r0, r32
+	moveli	r1, 0		/* arg to hv_reexec is 64 bits */
+
+	moveli	r41, lo16(___hv_reexec)
+	auli	r41, r41, ha16(___hv_reexec)
+
+	jalr	r41
+
+	/* we should not get here */
+
+	moveli	r0, '?'
+	jalr	r40
+	moveli	r0, '\n'
+	jalr	r40
+
+	j	.Lhalt
+
+.Ltry8:	seqi	r0, r9, 0x8	/* IND_SOURCE */
+	bz	r0, .Lerr	/* unknown type */
+
+	/* copy page at r10 to page at r33 */
+
+	move	r11, r33
+
+	moveli	r0, lo16(PAGE_SIZE)
+	auli	r0, r0, ha16(PAGE_SIZE)
+	add	r33, r33, r0
+
+	/* copy word at r10 to word at r11 until r11 equals r33 */
+
+	/* We know page size must be multiple of 16, so we can unroll
+	 * 16 times safely without any edge case checking.
+	 *
+	 * Issue a flush of the destination every 16 words to avoid
+	 * incoherence when starting the new kernel.  (Now this is
+	 * just good paranoia because the hv_reexec call will also
+	 * take care of this.)
+	 */
+
+1:
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0; addi	r11, r11, 4 }
+	{ lw	r0, r10; addi	r10, r10, 4 }
+	{ sw	r11, r0 }
+	{ flush r11    ; addi	r11, r11, 4 }
+
+	seq	r0, r33, r11
+	bzt	r0, 1b
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+	moveli	r0, 's'
+	jalr	r40
+#endif
+
+	addi	r30, r30, 4
+	j	.Lloop
+
+
+.Lerr:	moveli	r0, 'e'
+	jalr	r40
+	moveli	r0, 'r'
+	jalr	r40
+	moveli	r0, 'r'
+	jalr	r40
+	moveli	r0, '\n'
+	jalr	r40
+.Lhalt:
+	moveli	r41, lo16(___hv_halt)
+	auli	r41, r41, ha16(___hv_halt)
+
+	jalr	r41
+	STD_ENDPROC(relocate_new_kernel)
+
+	.section .rodata,"a"
+
+	.globl relocate_new_kernel_size
+relocate_new_kernel_size:
+	.long .Lend_relocate_new_kernel - relocate_new_kernel
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
new file mode 100644
index 00000000000..4dd21c1e6d5
--- /dev/null
+++ b/arch/tile/kernel/setup.c
@@ -0,0 +1,1511 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/node.h>
+#include <linux/cpu.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/kexec.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/io.h>
+#include <linux/highmem.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/sections.h>
+#include <asm/cacheflush.h>
+#include <asm/cacheflush.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+
+/* <linux/smp.h> doesn't provide this definition. */
+#ifndef CONFIG_SMP
+#define setup_max_cpus 1
+#endif
+
+static inline int ABS(int x) { return x >= 0 ? x : -x; }
+
+/* Chip information */
+char chip_model[64] __write_once;
+
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+/* We only create bootmem data on node 0. */
+static bootmem_data_t __initdata node0_bdata;
+
+/* Information on the NUMA nodes that we compute early */
+unsigned long __cpuinitdata node_start_pfn[MAX_NUMNODES];
+unsigned long __cpuinitdata node_end_pfn[MAX_NUMNODES];
+unsigned long __initdata node_memmap_pfn[MAX_NUMNODES];
+unsigned long __initdata node_percpu_pfn[MAX_NUMNODES];
+unsigned long __initdata node_free_pfn[MAX_NUMNODES];
+
+#ifdef CONFIG_HIGHMEM
+/* Page frame index of end of lowmem on each controller. */
+unsigned long __cpuinitdata node_lowmem_end_pfn[MAX_NUMNODES];
+
+/* Number of pages that can be mapped into lowmem. */
+static unsigned long __initdata mappable_physpages;
+#endif
+
+/* Data on which physical memory controller corresponds to which NUMA node */
+int node_controller[MAX_NUMNODES] = { [0 ... MAX_NUMNODES-1] = -1 };
+
+#ifdef CONFIG_HIGHMEM
+/* Map information from VAs to PAs */
+unsigned long pbase_map[1 << (32 - HPAGE_SHIFT)]
+  __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(pbase_map);
+
+/* Map information from PAs to VAs */
+void *vbase_map[NR_PA_HIGHBIT_VALUES]
+  __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(vbase_map);
+#endif
+
+/* Node number as a function of the high PA bits */
+int highbits_to_node[NR_PA_HIGHBIT_VALUES] __write_once;
+EXPORT_SYMBOL(highbits_to_node);
+
+static unsigned int __initdata maxmem_pfn = -1U;
+static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = {
+	[0 ... MAX_NUMNODES-1] = -1U
+};
+static nodemask_t __initdata isolnodes;
+
+#ifdef CONFIG_PCI
+enum { DEFAULT_PCI_RESERVE_MB = 64 };
+static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB;
+unsigned long __initdata pci_reserve_start_pfn = -1U;
+unsigned long __initdata pci_reserve_end_pfn = -1U;
+#endif
+
+static int __init setup_maxmem(char *str)
+{
+	long maxmem_mb;
+	if (str == NULL || strict_strtol(str, 0, &maxmem_mb) != 0 ||
+	    maxmem_mb == 0)
+		return -EINVAL;
+
+	maxmem_pfn = (maxmem_mb >> (HPAGE_SHIFT - 20)) <<
+		(HPAGE_SHIFT - PAGE_SHIFT);
+	pr_info("Forcing RAM used to no more than %dMB\n",
+	       maxmem_pfn >> (20 - PAGE_SHIFT));
+	return 0;
+}
+early_param("maxmem", setup_maxmem);
+
+static int __init setup_maxnodemem(char *str)
+{
+	char *endp;
+	long maxnodemem_mb, node;
+
+	node = str ? simple_strtoul(str, &endp, 0) : INT_MAX;
+	if (node >= MAX_NUMNODES || *endp != ':' ||
+	    strict_strtol(endp+1, 0, &maxnodemem_mb) != 0)
+		return -EINVAL;
+
+	maxnodemem_pfn[node] = (maxnodemem_mb >> (HPAGE_SHIFT - 20)) <<
+		(HPAGE_SHIFT - PAGE_SHIFT);
+	pr_info("Forcing RAM used on node %ld to no more than %dMB\n",
+	       node, maxnodemem_pfn[node] >> (20 - PAGE_SHIFT));
+	return 0;
+}
+early_param("maxnodemem", setup_maxnodemem);
+
+static int __init setup_isolnodes(char *str)
+{
+	char buf[MAX_NUMNODES * 5];
+	if (str == NULL || nodelist_parse(str, isolnodes) != 0)
+		return -EINVAL;
+
+	nodelist_scnprintf(buf, sizeof(buf), isolnodes);
+	pr_info("Set isolnodes value to '%s'\n", buf);
+	return 0;
+}
+early_param("isolnodes", setup_isolnodes);
+
+#ifdef CONFIG_PCI
+static int __init setup_pci_reserve(char* str)
+{
+	unsigned long mb;
+
+	if (str == NULL || strict_strtoul(str, 0, &mb) != 0 ||
+	    mb > 3 * 1024)
+		return -EINVAL;
+
+	pci_reserve_mb = mb;
+	pr_info("Reserving %dMB for PCIE root complex mappings\n",
+	       pci_reserve_mb);
+	return 0;
+}
+early_param("pci_reserve", setup_pci_reserve);
+#endif
+
+#ifndef __tilegx__
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size' bytes.
+ * This can be used to increase (or decrease) the vmalloc area.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	VMALLOC_RESERVE = (memparse(arg, &arg) + PGDIR_SIZE - 1) & PGDIR_MASK;
+
+	/* See validate_va() for more on this test. */
+	if ((long)_VMALLOC_START >= 0)
+		early_panic("\"vmalloc=%#lx\" value too large: maximum %#lx\n",
+			    VMALLOC_RESERVE, _VMALLOC_END - 0x80000000UL);
+
+	return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * Determine for each controller where its lowmem is mapped and how
+ * much of it is mapped there.  On controller zero, the first few
+ * megabytes are mapped at 0xfd000000 as code, so in principle we
+ * could start our data mappings higher up, but for now we don't
+ * bother, to avoid additional confusion.
+ *
+ * One question is whether, on systems with more than 768 Mb and
+ * controllers of different sizes, to map in a proportionate amount of
+ * each one, or to try to map the same amount from each controller.
+ * (E.g. if we have three controllers with 256MB, 1GB, and 256MB
+ * respectively, do we map 256MB from each, or do we map 128 MB, 512
+ * MB, and 128 MB respectively?)  For now we use a proportionate
+ * solution like the latter.
+ *
+ * The VA/PA mapping demands that we align our decisions at 16 MB
+ * boundaries so that we can rapidly convert VA to PA.
+ */
+static void *__init setup_pa_va_mapping(void)
+{
+	unsigned long curr_pages = 0;
+	unsigned long vaddr = PAGE_OFFSET;
+	nodemask_t highonlynodes = isolnodes;
+	int i, j;
+
+	memset(pbase_map, -1, sizeof(pbase_map));
+	memset(vbase_map, -1, sizeof(vbase_map));
+
+	/* Node zero cannot be isolated for LOWMEM purposes. */
+	node_clear(0, highonlynodes);
+
+	/* Count up the number of pages on non-highonlynodes controllers. */
+	mappable_physpages = 0;
+	for_each_online_node(i) {
+		if (!node_isset(i, highonlynodes))
+			mappable_physpages +=
+				node_end_pfn[i] - node_start_pfn[i];
+	}
+
+	for_each_online_node(i) {
+		unsigned long start = node_start_pfn[i];
+		unsigned long end = node_end_pfn[i];
+		unsigned long size = end - start;
+		unsigned long vaddr_end;
+
+		if (node_isset(i, highonlynodes)) {
+			/* Mark this controller as having no lowmem. */
+			node_lowmem_end_pfn[i] = start;
+			continue;
+		}
+
+		curr_pages += size;
+		if (mappable_physpages > MAXMEM_PFN) {
+			vaddr_end = PAGE_OFFSET +
+				(((u64)curr_pages * MAXMEM_PFN /
+				  mappable_physpages)
+				 << PAGE_SHIFT);
+		} else {
+			vaddr_end = PAGE_OFFSET + (curr_pages << PAGE_SHIFT);
+		}
+		for (j = 0; vaddr < vaddr_end; vaddr += HPAGE_SIZE, ++j) {
+			unsigned long this_pfn =
+				start + (j << HUGETLB_PAGE_ORDER);
+			pbase_map[vaddr >> HPAGE_SHIFT] = this_pfn;
+			if (vbase_map[__pfn_to_highbits(this_pfn)] ==
+			    (void *)-1)
+				vbase_map[__pfn_to_highbits(this_pfn)] =
+					(void *)(vaddr & HPAGE_MASK);
+		}
+		node_lowmem_end_pfn[i] = start + (j << HUGETLB_PAGE_ORDER);
+		BUG_ON(node_lowmem_end_pfn[i] > end);
+	}
+
+	/* Return highest address of any mapped memory. */
+	return (void *)vaddr;
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * Register our most important memory mappings with the debug stub.
+ *
+ * This is up to 4 mappings for lowmem, one mapping per memory
+ * controller, plus one for our text segment.
+ */
+static void __cpuinit store_permanent_mappings(void)
+{
+	int i;
+
+	for_each_online_node(i) {
+		HV_PhysAddr pa = ((HV_PhysAddr)node_start_pfn[i]) << PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+		HV_PhysAddr high_mapped_pa = node_lowmem_end_pfn[i];
+#else
+		HV_PhysAddr high_mapped_pa = node_end_pfn[i];
+#endif
+
+		unsigned long pages = high_mapped_pa - node_start_pfn[i];
+		HV_VirtAddr addr = (HV_VirtAddr) __va(pa);
+		hv_store_mapping(addr, pages << PAGE_SHIFT, pa);
+	}
+
+	hv_store_mapping((HV_VirtAddr)_stext,
+			 (uint32_t)(_einittext - _stext), 0);
+}
+
+/*
+ * Use hv_inquire_physical() to populate node_{start,end}_pfn[]
+ * and node_online_map, doing suitable sanity-checking.
+ * Also set min_low_pfn, max_low_pfn, and max_pfn.
+ */
+static void __init setup_memory(void)
+{
+	int i, j;
+	int highbits_seen[NR_PA_HIGHBIT_VALUES] = { 0 };
+#ifdef CONFIG_HIGHMEM
+	long highmem_pages;
+#endif
+#ifndef __tilegx__
+	int cap;
+#endif
+#if defined(CONFIG_HIGHMEM) || defined(__tilegx__)
+	long lowmem_pages;
+#endif
+
+	/* We are using a char to hold the cpu_2_node[] mapping */
+	BUG_ON(MAX_NUMNODES > 127);
+
+	/* Discover the ranges of memory available to us */
+	for (i = 0; ; ++i) {
+		unsigned long start, size, end, highbits;
+		HV_PhysAddrRange range = hv_inquire_physical(i);
+		if (range.size == 0)
+			break;
+#ifdef CONFIG_FLATMEM
+		if (i > 0) {
+			pr_err("Can't use discontiguous PAs: %#llx..%#llx\n",
+			       range.size, range.start + range.size);
+			continue;
+		}
+#endif
+#ifndef __tilegx__
+		if ((unsigned long)range.start) {
+			pr_err("Range not at 4GB multiple: %#llx..%#llx\n",
+			       range.start, range.start + range.size);
+			continue;
+		}
+#endif
+		if ((range.start & (HPAGE_SIZE-1)) != 0 ||
+		    (range.size & (HPAGE_SIZE-1)) != 0) {
+			unsigned long long start_pa = range.start;
+			unsigned long long orig_size = range.size;
+			range.start = (start_pa + HPAGE_SIZE - 1) & HPAGE_MASK;
+			range.size -= (range.start - start_pa);
+			range.size &= HPAGE_MASK;
+			pr_err("Range not hugepage-aligned: %#llx..%#llx:"
+			       " now %#llx-%#llx\n",
+			       start_pa, start_pa + orig_size,
+			       range.start, range.start + range.size);
+		}
+		highbits = __pa_to_highbits(range.start);
+		if (highbits >= NR_PA_HIGHBIT_VALUES) {
+			pr_err("PA high bits too high: %#llx..%#llx\n",
+			       range.start, range.start + range.size);
+			continue;
+		}
+		if (highbits_seen[highbits]) {
+			pr_err("Range overlaps in high bits: %#llx..%#llx\n",
+			       range.start, range.start + range.size);
+			continue;
+		}
+		highbits_seen[highbits] = 1;
+		if (PFN_DOWN(range.size) > maxnodemem_pfn[i]) {
+			int max_size = maxnodemem_pfn[i];
+			if (max_size > 0) {
+				pr_err("Maxnodemem reduced node %d to"
+				       " %d pages\n", i, max_size);
+				range.size = PFN_PHYS(max_size);
+			} else {
+				pr_err("Maxnodemem disabled node %d\n", i);
+				continue;
+			}
+		}
+		if (num_physpages + PFN_DOWN(range.size) > maxmem_pfn) {
+			int max_size = maxmem_pfn - num_physpages;
+			if (max_size > 0) {
+				pr_err("Maxmem reduced node %d to %d pages\n",
+				       i, max_size);
+				range.size = PFN_PHYS(max_size);
+			} else {
+				pr_err("Maxmem disabled node %d\n", i);
+				continue;
+			}
+		}
+		if (i >= MAX_NUMNODES) {
+			pr_err("Too many PA nodes (#%d): %#llx...%#llx\n",
+			       i, range.size, range.size + range.start);
+			continue;
+		}
+
+		start = range.start >> PAGE_SHIFT;
+		size = range.size >> PAGE_SHIFT;
+		end = start + size;
+
+#ifndef __tilegx__
+		if (((HV_PhysAddr)end << PAGE_SHIFT) !=
+		    (range.start + range.size)) {
+			pr_err("PAs too high to represent: %#llx..%#llx\n",
+			       range.start, range.start + range.size);
+			continue;
+		}
+#endif
+#ifdef CONFIG_PCI
+		/*
+		 * Blocks that overlap the pci reserved region must
+		 * have enough space to hold the maximum percpu data
+		 * region at the top of the range.  If there isn't
+		 * enough space above the reserved region, just
+		 * truncate the node.
+		 */
+		if (start <= pci_reserve_start_pfn &&
+		    end > pci_reserve_start_pfn) {
+			unsigned int per_cpu_size =
+				__per_cpu_end - __per_cpu_start;
+			unsigned int percpu_pages =
+				NR_CPUS * (PFN_UP(per_cpu_size) >> PAGE_SHIFT);
+			if (end < pci_reserve_end_pfn + percpu_pages) {
+				end = pci_reserve_start_pfn;
+				pr_err("PCI mapping region reduced node %d to"
+				       " %ld pages\n", i, end - start);
+			}
+		}
+#endif
+
+		for (j = __pfn_to_highbits(start);
+		     j <= __pfn_to_highbits(end - 1); j++)
+			highbits_to_node[j] = i;
+
+		node_start_pfn[i] = start;
+		node_end_pfn[i] = end;
+		node_controller[i] = range.controller;
+		num_physpages += size;
+		max_pfn = end;
+
+		/* Mark node as online */
+		node_set(i, node_online_map);
+		node_set(i, node_possible_map);
+	}
+
+#ifndef __tilegx__
+	/*
+	 * For 4KB pages, mem_map "struct page" data is 1% of the size
+	 * of the physical memory, so can be quite big (640 MB for
+	 * four 16G zones).  These structures must be mapped in
+	 * lowmem, and since we currently cap out at about 768 MB,
+	 * it's impractical to try to use this much address space.
+	 * For now, arbitrarily cap the amount of physical memory
+	 * we're willing to use at 8 million pages (32GB of 4KB pages).
+	 */
+	cap = 8 * 1024 * 1024;  /* 8 million pages */
+	if (num_physpages > cap) {
+		int num_nodes = num_online_nodes();
+		int cap_each = cap / num_nodes;
+		unsigned long dropped_pages = 0;
+		for (i = 0; i < num_nodes; ++i) {
+			int size = node_end_pfn[i] - node_start_pfn[i];
+			if (size > cap_each) {
+				dropped_pages += (size - cap_each);
+				node_end_pfn[i] = node_start_pfn[i] + cap_each;
+			}
+		}
+		num_physpages -= dropped_pages;
+		pr_warning("Only using %ldMB memory;"
+		       " ignoring %ldMB.\n",
+		       num_physpages >> (20 - PAGE_SHIFT),
+		       dropped_pages >> (20 - PAGE_SHIFT));
+		pr_warning("Consider using a larger page size.\n");
+	}
+#endif
+
+	/* Heap starts just above the last loaded address. */
+	min_low_pfn = PFN_UP((unsigned long)_end - PAGE_OFFSET);
+
+#ifdef CONFIG_HIGHMEM
+	/* Find where we map lowmem from each controller. */
+	high_memory = setup_pa_va_mapping();
+
+	/* Set max_low_pfn based on what node 0 can directly address. */
+	max_low_pfn = node_lowmem_end_pfn[0];
+
+	lowmem_pages = (mappable_physpages > MAXMEM_PFN) ?
+		MAXMEM_PFN : mappable_physpages;
+	highmem_pages = (long) (num_physpages - lowmem_pages);
+
+	pr_notice("%ldMB HIGHMEM available.\n",
+	       pages_to_mb(highmem_pages > 0 ? highmem_pages : 0));
+	pr_notice("%ldMB LOWMEM available.\n",
+			pages_to_mb(lowmem_pages));
+#else
+	/* Set max_low_pfn based on what node 0 can directly address. */
+	max_low_pfn = node_end_pfn[0];
+
+#ifndef __tilegx__
+	if (node_end_pfn[0] > MAXMEM_PFN) {
+		pr_warning("Only using %ldMB LOWMEM.\n",
+		       MAXMEM>>20);
+		pr_warning("Use a HIGHMEM enabled kernel.\n");
+		max_low_pfn = MAXMEM_PFN;
+		max_pfn = MAXMEM_PFN;
+		num_physpages = MAXMEM_PFN;
+		node_end_pfn[0] = MAXMEM_PFN;
+	} else {
+		pr_notice("%ldMB memory available.\n",
+		       pages_to_mb(node_end_pfn[0]));
+	}
+	for (i = 1; i < MAX_NUMNODES; ++i) {
+		node_start_pfn[i] = 0;
+		node_end_pfn[i] = 0;
+	}
+	high_memory = __va(node_end_pfn[0]);
+#else
+	lowmem_pages = 0;
+	for (i = 0; i < MAX_NUMNODES; ++i) {
+		int pages = node_end_pfn[i] - node_start_pfn[i];
+		lowmem_pages += pages;
+		if (pages)
+			high_memory = pfn_to_kaddr(node_end_pfn[i]);
+	}
+	pr_notice("%ldMB memory available.\n",
+	       pages_to_mb(lowmem_pages));
+#endif
+#endif
+}
+
+static void __init setup_bootmem_allocator(void)
+{
+	unsigned long bootmap_size, first_alloc_pfn, last_alloc_pfn;
+
+	/* Provide a node 0 bdata. */
+	NODE_DATA(0)->bdata = &node0_bdata;
+
+#ifdef CONFIG_PCI
+	/* Don't let boot memory alias the PCI region. */
+	last_alloc_pfn = min(max_low_pfn, pci_reserve_start_pfn);
+#else
+	last_alloc_pfn = max_low_pfn;
+#endif
+
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 * The first argument says where to put the bitmap, and the
+	 * second says where the end of allocatable memory is.
+	 */
+	bootmap_size = init_bootmem(min_low_pfn, last_alloc_pfn);
+
+	/*
+	 * Let the bootmem allocator use all the space we've given it
+	 * except for its own bitmap.
+	 */
+	first_alloc_pfn = min_low_pfn + PFN_UP(bootmap_size);
+	if (first_alloc_pfn >= last_alloc_pfn)
+		early_panic("Not enough memory on controller 0 for bootmem\n");
+
+	free_bootmem(PFN_PHYS(first_alloc_pfn),
+		     PFN_PHYS(last_alloc_pfn - first_alloc_pfn));
+
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		reserve_bootmem(crashk_res.start,
+			crashk_res.end - crashk_res.start + 1, 0);
+#endif
+
+}
+
+void *__init alloc_remap(int nid, unsigned long size)
+{
+	int pages = node_end_pfn[nid] - node_start_pfn[nid];
+	void *map = pfn_to_kaddr(node_memmap_pfn[nid]);
+	BUG_ON(size != pages * sizeof(struct page));
+	memset(map, 0, size);
+	return map;
+}
+
+static int __init percpu_size(void)
+{
+	int size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
+#ifdef CONFIG_MODULES
+	if (size < PERCPU_ENOUGH_ROOM)
+		size = PERCPU_ENOUGH_ROOM;
+#endif
+	/* In several places we assume the per-cpu data fits on a huge page. */
+	BUG_ON(kdata_huge && size > HPAGE_SIZE);
+	return size;
+}
+
+static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal)
+{
+	void *kva = __alloc_bootmem(size, PAGE_SIZE, goal);
+	unsigned long pfn = kaddr_to_pfn(kva);
+	BUG_ON(goal && PFN_PHYS(pfn) != goal);
+	return pfn;
+}
+
+static void __init zone_sizes_init(void)
+{
+	unsigned long zones_size[MAX_NR_ZONES] = { 0 };
+	unsigned long node_percpu[MAX_NUMNODES] = { 0 };
+	int size = percpu_size();
+	int num_cpus = smp_height * smp_width;
+	int i;
+
+	for (i = 0; i < num_cpus; ++i)
+		node_percpu[cpu_to_node(i)] += size;
+
+	for_each_online_node(i) {
+		unsigned long start = node_start_pfn[i];
+		unsigned long end = node_end_pfn[i];
+#ifdef CONFIG_HIGHMEM
+		unsigned long lowmem_end = node_lowmem_end_pfn[i];
+#else
+		unsigned long lowmem_end = end;
+#endif
+		int memmap_size = (end - start) * sizeof(struct page);
+		node_free_pfn[i] = start;
+
+		/*
+		 * Set aside pages for per-cpu data and the mem_map array.
+		 *
+		 * Since the per-cpu data requires special homecaching,
+		 * if we are in kdata_huge mode, we put it at the end of
+		 * the lowmem region.  If we're not in kdata_huge mode,
+		 * we take the per-cpu pages from the bottom of the
+		 * controller, since that avoids fragmenting a huge page
+		 * that users might want.  We always take the memmap
+		 * from the bottom of the controller, since with
+		 * kdata_huge that lets it be under a huge TLB entry.
+		 *
+		 * If the user has requested isolnodes for a controller,
+		 * though, there'll be no lowmem, so we just alloc_bootmem
+		 * the memmap.  There will be no percpu memory either.
+		 */
+		if (__pfn_to_highbits(start) == 0) {
+			/* In low PAs, allocate via bootmem. */
+			unsigned long goal = 0;
+			node_memmap_pfn[i] =
+				alloc_bootmem_pfn(memmap_size, goal);
+			if (kdata_huge)
+				goal = PFN_PHYS(lowmem_end) - node_percpu[i];
+			if (node_percpu[i])
+				node_percpu_pfn[i] =
+				    alloc_bootmem_pfn(node_percpu[i], goal);
+		} else if (cpu_isset(i, isolnodes)) {
+			node_memmap_pfn[i] = alloc_bootmem_pfn(memmap_size, 0);
+			BUG_ON(node_percpu[i] != 0);
+		} else {
+			/* In high PAs, just reserve some pages. */
+			node_memmap_pfn[i] = node_free_pfn[i];
+			node_free_pfn[i] += PFN_UP(memmap_size);
+			if (!kdata_huge) {
+				node_percpu_pfn[i] = node_free_pfn[i];
+				node_free_pfn[i] += PFN_UP(node_percpu[i]);
+			} else {
+				node_percpu_pfn[i] =
+					lowmem_end - PFN_UP(node_percpu[i]);
+			}
+		}
+
+#ifdef CONFIG_HIGHMEM
+		if (start > lowmem_end) {
+			zones_size[ZONE_NORMAL] = 0;
+			zones_size[ZONE_HIGHMEM] = end - start;
+		} else {
+			zones_size[ZONE_NORMAL] = lowmem_end - start;
+			zones_size[ZONE_HIGHMEM] = end - lowmem_end;
+		}
+#else
+		zones_size[ZONE_NORMAL] = end - start;
+#endif
+
+		/*
+		 * Everyone shares node 0's bootmem allocator, but
+		 * we use alloc_remap(), above, to put the actual
+		 * struct page array on the individual controllers,
+		 * which is most of the data that we actually care about.
+		 * We can't place bootmem allocators on the other
+		 * controllers since the bootmem allocator can only
+		 * operate on 32-bit physical addresses.
+		 */
+		NODE_DATA(i)->bdata = NODE_DATA(0)->bdata;
+
+		free_area_init_node(i, zones_size, start, NULL);
+		printk(KERN_DEBUG "  DMA zone: %ld per-cpu pages\n",
+		       PFN_UP(node_percpu[i]));
+
+		/* Track the type of memory on each node */
+		if (zones_size[ZONE_NORMAL])
+			node_set_state(i, N_NORMAL_MEMORY);
+#ifdef CONFIG_HIGHMEM
+		if (end != start)
+			node_set_state(i, N_HIGH_MEMORY);
+#endif
+
+		node_set_online(i);
+	}
+}
+
+#ifdef CONFIG_NUMA
+
+/* which logical CPUs are on which nodes */
+struct cpumask node_2_cpu_mask[MAX_NUMNODES] __write_once;
+EXPORT_SYMBOL(node_2_cpu_mask);
+
+/* which node each logical CPU is on */
+char cpu_2_node[NR_CPUS] __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(cpu_2_node);
+
+/* Return cpu_to_node() except for cpus not yet assigned, which return -1 */
+static int __init cpu_to_bound_node(int cpu, struct cpumask* unbound_cpus)
+{
+	if (!cpu_possible(cpu) || cpumask_test_cpu(cpu, unbound_cpus))
+		return -1;
+	else
+		return cpu_to_node(cpu);
+}
+
+/* Return number of immediately-adjacent tiles sharing the same NUMA node. */
+static int __init node_neighbors(int node, int cpu,
+				 struct cpumask *unbound_cpus)
+{
+	int neighbors = 0;
+	int w = smp_width;
+	int h = smp_height;
+	int x = cpu % w;
+	int y = cpu / w;
+	if (x > 0 && cpu_to_bound_node(cpu-1, unbound_cpus) == node)
+		++neighbors;
+	if (x < w-1 && cpu_to_bound_node(cpu+1, unbound_cpus) == node)
+		++neighbors;
+	if (y > 0 && cpu_to_bound_node(cpu-w, unbound_cpus) == node)
+		++neighbors;
+	if (y < h-1 && cpu_to_bound_node(cpu+w, unbound_cpus) == node)
+		++neighbors;
+	return neighbors;
+}
+
+static void __init setup_numa_mapping(void)
+{
+	int distance[MAX_NUMNODES][NR_CPUS];
+	HV_Coord coord;
+	int cpu, node, cpus, i, x, y;
+	int num_nodes = num_online_nodes();
+	struct cpumask unbound_cpus;
+	nodemask_t default_nodes;
+
+	cpumask_clear(&unbound_cpus);
+
+	/* Get set of nodes we will use for defaults */
+	nodes_andnot(default_nodes, node_online_map, isolnodes);
+	if (nodes_empty(default_nodes)) {
+		BUG_ON(!node_isset(0, node_online_map));
+		pr_err("Forcing NUMA node zero available as a default node\n");
+		node_set(0, default_nodes);
+	}
+
+	/* Populate the distance[] array */
+	memset(distance, -1, sizeof(distance));
+	cpu = 0;
+	for (coord.y = 0; coord.y < smp_height; ++coord.y) {
+		for (coord.x = 0; coord.x < smp_width;
+		     ++coord.x, ++cpu) {
+			BUG_ON(cpu >= nr_cpu_ids);
+			if (!cpu_possible(cpu)) {
+				cpu_2_node[cpu] = -1;
+				continue;
+			}
+			for_each_node_mask(node, default_nodes) {
+				HV_MemoryControllerInfo info =
+					hv_inquire_memory_controller(
+						coord, node_controller[node]);
+				distance[node][cpu] =
+					ABS(info.coord.x) + ABS(info.coord.y);
+			}
+			cpumask_set_cpu(cpu, &unbound_cpus);
+		}
+	}
+	cpus = cpu;
+
+	/*
+	 * Round-robin through the NUMA nodes until all the cpus are
+	 * assigned.  We could be more clever here (e.g. create four
+	 * sorted linked lists on the same set of cpu nodes, and pull
+	 * off them in round-robin sequence, removing from all four
+	 * lists each time) but given the relatively small numbers
+	 * involved, O(n^2) seem OK for a one-time cost.
+	 */
+	node = first_node(default_nodes);
+	while (!cpumask_empty(&unbound_cpus)) {
+		int best_cpu = -1;
+		int best_distance = INT_MAX;
+		for (cpu = 0; cpu < cpus; ++cpu) {
+			if (cpumask_test_cpu(cpu, &unbound_cpus)) {
+				/*
+				 * Compute metric, which is how much
+				 * closer the cpu is to this memory
+				 * controller than the others, shifted
+				 * up, and then the number of
+				 * neighbors already in the node as an
+				 * epsilon adjustment to try to keep
+				 * the nodes compact.
+				 */
+				int d = distance[node][cpu] * num_nodes;
+				for_each_node_mask(i, default_nodes) {
+					if (i != node)
+						d -= distance[i][cpu];
+				}
+				d *= 8;  /* allow space for epsilon */
+				d -= node_neighbors(node, cpu, &unbound_cpus);
+				if (d < best_distance) {
+					best_cpu = cpu;
+					best_distance = d;
+				}
+			}
+		}
+		BUG_ON(best_cpu < 0);
+		cpumask_set_cpu(best_cpu, &node_2_cpu_mask[node]);
+		cpu_2_node[best_cpu] = node;
+		cpumask_clear_cpu(best_cpu, &unbound_cpus);
+		node = next_node(node, default_nodes);
+		if (node == MAX_NUMNODES)
+			node = first_node(default_nodes);
+	}
+
+	/* Print out node assignments and set defaults for disabled cpus */
+	cpu = 0;
+	for (y = 0; y < smp_height; ++y) {
+		printk(KERN_DEBUG "NUMA cpu-to-node row %d:", y);
+		for (x = 0; x < smp_width; ++x, ++cpu) {
+			if (cpu_to_node(cpu) < 0) {
+				pr_cont(" -");
+				cpu_2_node[cpu] = first_node(default_nodes);
+			} else {
+				pr_cont(" %d", cpu_to_node(cpu));
+			}
+		}
+		pr_cont("\n");
+	}
+}
+
+static struct cpu cpu_devices[NR_CPUS];
+
+static int __init topology_init(void)
+{
+	int i;
+
+	for_each_online_node(i)
+		register_one_node(i);
+
+	for_each_present_cpu(i)
+		register_cpu(&cpu_devices[i], i);
+
+	return 0;
+}
+
+subsys_initcall(topology_init);
+
+#else /* !CONFIG_NUMA */
+
+#define setup_numa_mapping() do { } while (0)
+
+#endif /* CONFIG_NUMA */
+
+/**
+ * setup_cpu() - Do all necessary per-cpu, tile-specific initialization.
+ * @boot: Is this the boot cpu?
+ *
+ * Called from setup_arch() on the boot cpu, or online_secondary().
+ */
+void __cpuinit setup_cpu(int boot)
+{
+	/* The boot cpu sets up its permanent mappings much earlier. */
+	if (!boot)
+		store_permanent_mappings();
+
+	/* Allow asynchronous TLB interrupts. */
+#if CHIP_HAS_TILE_DMA()
+	raw_local_irq_unmask(INT_DMATLB_MISS);
+	raw_local_irq_unmask(INT_DMATLB_ACCESS);
+#endif
+#if CHIP_HAS_SN_PROC()
+	raw_local_irq_unmask(INT_SNITLB_MISS);
+#endif
+
+	/*
+	 * Allow user access to many generic SPRs, like the cycle
+	 * counter, PASS/FAIL/DONE, INTERRUPT_CRITICAL_SECTION, etc.
+	 */
+	__insn_mtspr(SPR_MPL_WORLD_ACCESS_SET_0, 1);
+
+#if CHIP_HAS_SN()
+	/* Static network is not restricted. */
+	__insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1);
+#endif
+#if CHIP_HAS_SN_PROC()
+	__insn_mtspr(SPR_MPL_SN_NOTIFY_SET_0, 1);
+	__insn_mtspr(SPR_MPL_SN_CPL_SET_0, 1);
+#endif
+
+	/*
+	 * Set the MPL for interrupt control 0 to user level.
+	 * This includes access to the SYSTEM_SAVE and EX_CONTEXT SPRs,
+	 * as well as the PL 0 interrupt mask.
+	 */
+	__insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1);
+
+	/* Initialize IRQ support for this cpu. */
+	setup_irq_regs();
+
+#ifdef CONFIG_HARDWALL
+	/* Reset the network state on this cpu. */
+	reset_network_state();
+#endif
+}
+
+static int __initdata set_initramfs_file;
+static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+
+static int __init setup_initramfs_file(char *str)
+{
+	if (str == NULL)
+		return -EINVAL;
+	strncpy(initramfs_file, str, sizeof(initramfs_file) - 1);
+	set_initramfs_file = 1;
+
+	return 0;
+}
+early_param("initramfs_file", setup_initramfs_file);
+
+/*
+ * We look for an additional "initramfs.cpio.gz" file in the hvfs.
+ * If there is one, we allocate some memory for it and it will be
+ * unpacked to the initramfs after any built-in initramfs_data.
+ */
+static void __init load_hv_initrd(void)
+{
+	HV_FS_StatInfo stat;
+	int fd, rc;
+	void *initrd;
+
+	fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
+	if (fd == HV_ENOENT) {
+		if (set_initramfs_file)
+			pr_warning("No such hvfs initramfs file '%s'\n",
+				   initramfs_file);
+		return;
+	}
+	BUG_ON(fd < 0);
+	stat = hv_fs_fstat(fd);
+	BUG_ON(stat.size < 0);
+	if (stat.flags & HV_FS_ISDIR) {
+		pr_warning("Ignoring hvfs file '%s': it's a directory.\n",
+			   initramfs_file);
+		return;
+	}
+	initrd = alloc_bootmem_pages(stat.size);
+	rc = hv_fs_pread(fd, (HV_VirtAddr) initrd, stat.size, 0);
+	if (rc != stat.size) {
+		pr_err("Error reading %d bytes from hvfs file '%s': %d\n",
+		       stat.size, initramfs_file, rc);
+		free_bootmem((unsigned long) initrd, stat.size);
+		return;
+	}
+	initrd_start = (unsigned long) initrd;
+	initrd_end = initrd_start + stat.size;
+}
+
+void __init free_initrd_mem(unsigned long begin, unsigned long end)
+{
+	free_bootmem(begin, end - begin);
+}
+
+static void __init validate_hv(void)
+{
+	/*
+	 * It may already be too late, but let's check our built-in
+	 * configuration against what the hypervisor is providing.
+	 */
+	unsigned long glue_size = hv_sysconf(HV_SYSCONF_GLUE_SIZE);
+	int hv_page_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL);
+	int hv_hpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE);
+	HV_ASIDRange asid_range;
+
+#ifndef CONFIG_SMP
+	HV_Topology topology = hv_inquire_topology();
+	BUG_ON(topology.coord.x != 0 || topology.coord.y != 0);
+	if (topology.width != 1 || topology.height != 1) {
+		pr_warning("Warning: booting UP kernel on %dx%d grid;"
+			   " will ignore all but first tile.\n",
+			   topology.width, topology.height);
+	}
+#endif
+
+	if (PAGE_OFFSET + HV_GLUE_START_CPA + glue_size > (unsigned long)_text)
+		early_panic("Hypervisor glue size %ld is too big!\n",
+			    glue_size);
+	if (hv_page_size != PAGE_SIZE)
+		early_panic("Hypervisor page size %#x != our %#lx\n",
+			    hv_page_size, PAGE_SIZE);
+	if (hv_hpage_size != HPAGE_SIZE)
+		early_panic("Hypervisor huge page size %#x != our %#lx\n",
+			    hv_hpage_size, HPAGE_SIZE);
+
+#ifdef CONFIG_SMP
+	/*
+	 * Some hypervisor APIs take a pointer to a bitmap array
+	 * whose size is at least the number of cpus on the chip.
+	 * We use a struct cpumask for this, so it must be big enough.
+	 */
+	if ((smp_height * smp_width) > nr_cpu_ids)
+		early_panic("Hypervisor %d x %d grid too big for Linux"
+			    " NR_CPUS %d\n", smp_height, smp_width,
+			    nr_cpu_ids);
+#endif
+
+	/*
+	 * Check that we're using allowed ASIDs, and initialize the
+	 * various asid variables to their appropriate initial states.
+	 */
+	asid_range = hv_inquire_asid(0);
+	__get_cpu_var(current_asid) = min_asid = asid_range.start;
+	max_asid = asid_range.start + asid_range.size - 1;
+
+	if (hv_confstr(HV_CONFSTR_CHIP_MODEL, (HV_VirtAddr)chip_model,
+		       sizeof(chip_model)) < 0) {
+		pr_err("Warning: HV_CONFSTR_CHIP_MODEL not available\n");
+		strlcpy(chip_model, "unknown", sizeof(chip_model));
+	}
+}
+
+static void __init validate_va(void)
+{
+#ifndef __tilegx__   /* FIXME: GX: probably some validation relevant here */
+	/*
+	 * Similarly, make sure we're only using allowed VAs.
+	 * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_INTRPT,
+	 * and 0 .. KERNEL_HIGH_VADDR.
+	 * In addition, make sure we CAN'T use the end of memory, since
+	 * we use the last chunk of each pgd for the pgd_list.
+	 */
+	int i, fc_fd_ok = 0;
+	unsigned long max_va = 0;
+	unsigned long list_va =
+		((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT);
+
+	for (i = 0; ; ++i) {
+		HV_VirtAddrRange range = hv_inquire_virtual(i);
+		if (range.size == 0)
+			break;
+		if (range.start <= MEM_USER_INTRPT &&
+		    range.start + range.size >= MEM_HV_INTRPT)
+			fc_fd_ok = 1;
+		if (range.start == 0)
+			max_va = range.size;
+		BUG_ON(range.start + range.size > list_va);
+	}
+	if (!fc_fd_ok)
+		early_panic("Hypervisor not configured for VAs 0xfc/0xfd\n");
+	if (max_va == 0)
+		early_panic("Hypervisor not configured for low VAs\n");
+	if (max_va < KERNEL_HIGH_VADDR)
+		early_panic("Hypervisor max VA %#lx smaller than %#lx\n",
+			    max_va, KERNEL_HIGH_VADDR);
+
+	/* Kernel PCs must have their high bit set; see intvec.S. */
+	if ((long)VMALLOC_START >= 0)
+		early_panic(
+			"Linux VMALLOC region below the 2GB line (%#lx)!\n"
+			"Reconfigure the kernel with fewer NR_HUGE_VMAPS\n"
+			"or smaller VMALLOC_RESERVE.\n",
+			VMALLOC_START);
+#endif
+}
+
+/*
+ * cpu_lotar_map lists all the cpus that are valid for the supervisor
+ * to cache data on at a page level, i.e. what cpus can be placed in
+ * the LOTAR field of a PTE.  It is equivalent to the set of possible
+ * cpus plus any other cpus that are willing to share their cache.
+ * It is set by hv_inquire_tiles(HV_INQ_TILES_LOTAR).
+ */
+struct cpumask __write_once cpu_lotar_map;
+EXPORT_SYMBOL(cpu_lotar_map);
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/*
+ * hash_for_home_map lists all the tiles that hash-for-home data
+ * will be cached on.  Note that this may includes tiles that are not
+ * valid for this supervisor to use otherwise (e.g. if a hypervisor
+ * device is being shared between multiple supervisors).
+ * It is set by hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE).
+ */
+struct cpumask hash_for_home_map;
+EXPORT_SYMBOL(hash_for_home_map);
+#endif
+
+/*
+ * cpu_cacheable_map lists all the cpus whose caches the hypervisor can
+ * flush on our behalf.  It is set to cpu_possible_map OR'ed with
+ * hash_for_home_map, and it is what should be passed to
+ * hv_flush_remote() to flush all caches.  Note that if there are
+ * dedicated hypervisor driver tiles that have authorized use of their
+ * cache, those tiles will only appear in cpu_lotar_map, NOT in
+ * cpu_cacheable_map, as they are a special case.
+ */
+struct cpumask __write_once cpu_cacheable_map;
+EXPORT_SYMBOL(cpu_cacheable_map);
+
+static __initdata struct cpumask disabled_map;
+
+static int __init disabled_cpus(char *str)
+{
+	int boot_cpu = smp_processor_id();
+
+	if (str == NULL || cpulist_parse_crop(str, &disabled_map) != 0)
+		return -EINVAL;
+	if (cpumask_test_cpu(boot_cpu, &disabled_map)) {
+		pr_err("disabled_cpus: can't disable boot cpu %d\n", boot_cpu);
+		cpumask_clear_cpu(boot_cpu, &disabled_map);
+	}
+	return 0;
+}
+
+early_param("disabled_cpus", disabled_cpus);
+
+void __init print_disabled_cpus(void)
+{
+	if (!cpumask_empty(&disabled_map)) {
+		char buf[100];
+		cpulist_scnprintf(buf, sizeof(buf), &disabled_map);
+		pr_info("CPUs not available for Linux: %s\n", buf);
+	}
+}
+
+static void __init setup_cpu_maps(void)
+{
+	struct cpumask hv_disabled_map, cpu_possible_init;
+	int boot_cpu = smp_processor_id();
+	int cpus, i, rc;
+
+	/* Learn which cpus are allowed by the hypervisor. */
+	rc = hv_inquire_tiles(HV_INQ_TILES_AVAIL,
+			      (HV_VirtAddr) cpumask_bits(&cpu_possible_init),
+			      sizeof(cpu_cacheable_map));
+	if (rc < 0)
+		early_panic("hv_inquire_tiles(AVAIL) failed: rc %d\n", rc);
+	if (!cpumask_test_cpu(boot_cpu, &cpu_possible_init))
+		early_panic("Boot CPU %d disabled by hypervisor!\n", boot_cpu);
+
+	/* Compute the cpus disabled by the hvconfig file. */
+	cpumask_complement(&hv_disabled_map, &cpu_possible_init);
+
+	/* Include them with the cpus disabled by "disabled_cpus". */
+	cpumask_or(&disabled_map, &disabled_map, &hv_disabled_map);
+
+	/*
+	 * Disable every cpu after "setup_max_cpus".  But don't mark
+	 * as disabled the cpus that are outside of our initial rectangle,
+	 * since that turns out to be confusing.
+	 */
+	cpus = 1;                          /* this cpu */
+	cpumask_set_cpu(boot_cpu, &disabled_map);   /* ignore this cpu */
+	for (i = 0; cpus < setup_max_cpus; ++i)
+		if (!cpumask_test_cpu(i, &disabled_map))
+			++cpus;
+	for (; i < smp_height * smp_width; ++i)
+		cpumask_set_cpu(i, &disabled_map);
+	cpumask_clear_cpu(boot_cpu, &disabled_map); /* reset this cpu */
+	for (i = smp_height * smp_width; i < NR_CPUS; ++i)
+		cpumask_clear_cpu(i, &disabled_map);
+
+	/*
+	 * Setup cpu_possible map as every cpu allocated to us, minus
+	 * the results of any "disabled_cpus" settings.
+	 */
+	cpumask_andnot(&cpu_possible_init, &cpu_possible_init, &disabled_map);
+	init_cpu_possible(&cpu_possible_init);
+
+	/* Learn which cpus are valid for LOTAR caching. */
+	rc = hv_inquire_tiles(HV_INQ_TILES_LOTAR,
+			      (HV_VirtAddr) cpumask_bits(&cpu_lotar_map),
+			      sizeof(cpu_lotar_map));
+	if (rc < 0) {
+		pr_err("warning: no HV_INQ_TILES_LOTAR; using AVAIL\n");
+		cpu_lotar_map = cpu_possible_map;
+	}
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	/* Retrieve set of CPUs used for hash-for-home caching */
+	rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE,
+			      (HV_VirtAddr) hash_for_home_map.bits,
+			      sizeof(hash_for_home_map));
+	if (rc < 0)
+		early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc);
+	cpumask_or(&cpu_cacheable_map, &cpu_possible_map, &hash_for_home_map);
+#else
+	cpu_cacheable_map = cpu_possible_map;
+#endif
+}
+
+
+static int __init dataplane(char *str)
+{
+	pr_warning("WARNING: dataplane support disabled in this kernel\n");
+	return 0;
+}
+
+early_param("dataplane", dataplane);
+
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+	int len;
+
+#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
+	len = hv_get_command_line((HV_VirtAddr) boot_command_line,
+				  COMMAND_LINE_SIZE);
+	if (boot_command_line[0])
+		pr_warning("WARNING: ignoring dynamic command line \"%s\"\n",
+			   boot_command_line);
+	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+	char *hv_cmdline;
+#if defined(CONFIG_CMDLINE_BOOL)
+	if (builtin_cmdline[0]) {
+		int builtin_len = strlcpy(boot_command_line, builtin_cmdline,
+					  COMMAND_LINE_SIZE);
+		if (builtin_len < COMMAND_LINE_SIZE-1)
+			boot_command_line[builtin_len++] = ' ';
+		hv_cmdline = &boot_command_line[builtin_len];
+		len = COMMAND_LINE_SIZE - builtin_len;
+	} else
+#endif
+	{
+		hv_cmdline = boot_command_line;
+		len = COMMAND_LINE_SIZE;
+	}
+	len = hv_get_command_line((HV_VirtAddr) hv_cmdline, len);
+	if (len < 0 || len > COMMAND_LINE_SIZE)
+		early_panic("hv_get_command_line failed: %d\n", len);
+#endif
+
+	*cmdline_p = boot_command_line;
+
+	/* Set disabled_map and setup_max_cpus very early */
+	parse_early_param();
+
+	/* Make sure the kernel is compatible with the hypervisor. */
+	validate_hv();
+	validate_va();
+
+	setup_cpu_maps();
+
+
+#ifdef CONFIG_PCI
+	/*
+	 * Initialize the PCI structures.  This is done before memory
+	 * setup so that we know whether or not a pci_reserve region
+	 * is necessary.
+	 */
+	if (tile_pci_init() == 0)
+		pci_reserve_mb = 0;
+
+	/* PCI systems reserve a region just below 4GB for mapping iomem. */
+	pci_reserve_end_pfn  = (1 << (32 - PAGE_SHIFT));
+	pci_reserve_start_pfn = pci_reserve_end_pfn -
+		(pci_reserve_mb << (20 - PAGE_SHIFT));
+#endif
+
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = (unsigned long) _end;
+
+	setup_memory();
+	store_permanent_mappings();
+	setup_bootmem_allocator();
+
+	/*
+	 * NOTE: before this point _nobody_ is allowed to allocate
+	 * any memory using the bootmem allocator.
+	 */
+
+	paging_init();
+	setup_numa_mapping();
+	zone_sizes_init();
+	set_page_homes();
+	setup_cpu(1);
+	setup_clock();
+	load_hv_initrd();
+}
+
+
+/*
+ * Set up per-cpu memory.
+ */
+
+unsigned long __per_cpu_offset[NR_CPUS] __write_once;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static size_t __initdata pfn_offset[MAX_NUMNODES] = { 0 };
+static unsigned long __initdata percpu_pfn[NR_CPUS] = { 0 };
+
+/*
+ * As the percpu code allocates pages, we return the pages from the
+ * end of the node for the specified cpu.
+ */
+static void *__init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
+{
+	int nid = cpu_to_node(cpu);
+	unsigned long pfn = node_percpu_pfn[nid] + pfn_offset[nid];
+
+	BUG_ON(size % PAGE_SIZE != 0);
+	pfn_offset[nid] += size / PAGE_SIZE;
+	if (percpu_pfn[cpu] == 0)
+		percpu_pfn[cpu] = pfn;
+	return pfn_to_kaddr(pfn);
+}
+
+/*
+ * Pages reserved for percpu memory are not freeable, and in any case we are
+ * on a short path to panic() in setup_per_cpu_area() at this point anyway.
+ */
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+}
+
+/*
+ * Set up vmalloc page tables using bootmem for the percpu code.
+ */
+static void __init pcpu_fc_populate_pte(unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	BUG_ON(pgd_addr_invalid(addr));
+
+	pgd = swapper_pg_dir + pgd_index(addr);
+	pud = pud_offset(pgd, addr);
+	BUG_ON(!pud_present(*pud));
+	pmd = pmd_offset(pud, addr);
+	if (pmd_present(*pmd)) {
+		BUG_ON(pmd_huge_page(*pmd));
+	} else {
+		pte = __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE,
+				      HV_PAGE_TABLE_ALIGN, 0);
+		pmd_populate_kernel(&init_mm, pmd, pte);
+	}
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	struct page *pg;
+	unsigned long delta, pfn, lowmem_va;
+	unsigned long size = percpu_size();
+	char *ptr;
+	int rc, cpu, i;
+
+	rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_fc_alloc,
+				   pcpu_fc_free, pcpu_fc_populate_pte);
+	if (rc < 0)
+		panic("Cannot initialize percpu area (err=%d)", rc);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu) {
+		__per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+
+		/* finv the copy out of cache so we can change homecache */
+		ptr = pcpu_base_addr + pcpu_unit_offsets[cpu];
+		__finv_buffer(ptr, size);
+		pfn = percpu_pfn[cpu];
+
+		/* Rewrite the page tables to cache on that cpu */
+		pg = pfn_to_page(pfn);
+		for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) {
+
+			/* Update the vmalloc mapping and page home. */
+			pte_t *ptep =
+				virt_to_pte(NULL, (unsigned long)ptr + i);
+			pte_t pte = *ptep;
+			BUG_ON(pfn != pte_pfn(pte));
+			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
+			pte = set_remote_cache_cpu(pte, cpu);
+			set_pte(ptep, pte);
+
+			/* Update the lowmem mapping for consistency. */
+			lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
+			ptep = virt_to_pte(NULL, lowmem_va);
+			if (pte_huge(*ptep)) {
+				printk(KERN_DEBUG "early shatter of huge page"
+				       " at %#lx\n", lowmem_va);
+				shatter_pmd((pmd_t *)ptep);
+				ptep = virt_to_pte(NULL, lowmem_va);
+				BUG_ON(pte_huge(*ptep));
+			}
+			BUG_ON(pfn != pte_pfn(*ptep));
+			set_pte(ptep, pte);
+		}
+	}
+
+	/* Set our thread pointer appropriately. */
+	set_my_cpu_offset(__per_cpu_offset[smp_processor_id()]);
+
+	/* Make sure the finv's have completed. */
+	mb_incoherent();
+
+	/* Flush the TLB so we reference it properly from here on out. */
+	local_flush_tlb_all();
+}
+
+static struct resource data_resource = {
+	.name	= "Kernel data",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+	.name	= "Kernel code",
+	.start	= 0,
+	.end	= 0,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+/*
+ * We reserve all resources above 4GB so that PCI won't try to put
+ * mappings above 4GB; the standard allows that for some devices but
+ * the probing code trunates values to 32 bits.
+ */
+#ifdef CONFIG_PCI
+static struct resource* __init
+insert_non_bus_resource(void)
+{
+	struct resource *res =
+		kzalloc(sizeof(struct resource), GFP_ATOMIC);
+	res->name = "Non-Bus Physical Address Space";
+	res->start = (1ULL << 32);
+	res->end = -1LL;
+	res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+	if (insert_resource(&iomem_resource, res)) {
+		kfree(res);
+		return NULL;
+	}
+	return res;
+}
+#endif
+
+static struct resource* __init
+insert_ram_resource(u64 start_pfn, u64 end_pfn)
+{
+	struct resource *res =
+		kzalloc(sizeof(struct resource), GFP_ATOMIC);
+	res->name = "System RAM";
+	res->start = start_pfn << PAGE_SHIFT;
+	res->end = (end_pfn << PAGE_SHIFT) - 1;
+	res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+	if (insert_resource(&iomem_resource, res)) {
+		kfree(res);
+		return NULL;
+	}
+	return res;
+}
+
+/*
+ * Request address space for all standard resources
+ *
+ * If the system includes PCI root complex drivers, we need to create
+ * a window just below 4GB where PCI BARs can be mapped.
+ */
+static int __init request_standard_resources(void)
+{
+	int i;
+	enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+
+	iomem_resource.end = -1LL;
+#ifdef CONFIG_PCI
+	insert_non_bus_resource();
+#endif
+
+	for_each_online_node(i) {
+		u64 start_pfn = node_start_pfn[i];
+		u64 end_pfn = node_end_pfn[i];
+
+#ifdef CONFIG_PCI
+		if (start_pfn <= pci_reserve_start_pfn &&
+		    end_pfn > pci_reserve_start_pfn) {
+			if (end_pfn > pci_reserve_end_pfn)
+				insert_ram_resource(pci_reserve_end_pfn,
+						     end_pfn);
+			end_pfn = pci_reserve_start_pfn;
+		}
+#endif
+		insert_ram_resource(start_pfn, end_pfn);
+	}
+
+	code_resource.start = __pa(_text - CODE_DELTA);
+	code_resource.end = __pa(_etext - CODE_DELTA)-1;
+	data_resource.start = __pa(_sdata);
+	data_resource.end = __pa(_end)-1;
+
+	insert_resource(&iomem_resource, &code_resource);
+	insert_resource(&iomem_resource, &data_resource);
+
+#ifdef CONFIG_KEXEC
+	insert_resource(&iomem_resource, &crashk_res);
+#endif
+
+	return 0;
+}
+
+subsys_initcall(request_standard_resources);
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
new file mode 100644
index 00000000000..45b66a3c991
--- /dev/null
+++ b/arch/tile/kernel/signal.c
@@ -0,0 +1,358 @@
+/*
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/compat.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <asm/syscalls.h>
+#include <arch/interrupts.h>
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+
+long _sys_sigaltstack(const stack_t __user *uss,
+		      stack_t __user *uoss, struct pt_regs *regs)
+{
+	return do_sigaltstack(uss, uoss, regs->sp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+int restore_sigcontext(struct pt_regs *regs,
+		       struct sigcontext __user *sc, long *pr0)
+{
+	int err = 0;
+	int i;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+	for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
+		err |= __get_user(((long *)regs)[i],
+				  &((long __user *)(&sc->regs))[i]);
+
+	regs->faultnum = INT_SWINT_1_SIGRETURN;
+
+	err |= __get_user(*pr0, &sc->regs.regs[0]);
+	return err;
+}
+
+/* sigreturn() returns long since it restores r0 in the interrupted code. */
+long _sys_rt_sigreturn(struct pt_regs *regs)
+{
+	struct rt_sigframe __user *frame =
+		(struct rt_sigframe __user *)(regs->sp);
+	sigset_t set;
+	long r0;
+
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	sigdelsetmask(&set, ~_BLOCKABLE);
+	spin_lock_irq(&current->sighand->siglock);
+	current->blocked = set;
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+		goto badframe;
+
+	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+		goto badframe;
+
+	return r0;
+
+badframe:
+	force_sig(SIGSEGV, current);
+	return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
+{
+	int i, err = 0;
+
+	for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
+		err |= __put_user(((long *)regs)[i],
+				  &((long __user *)(&sc->regs))[i]);
+
+	return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+					struct pt_regs *regs,
+					size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Default to using normal stack */
+	sp = regs->sp;
+
+	/*
+	 * If we are on the alternate signal stack and would overflow
+	 * it, don't.  Return an always-bogus address instead so we
+	 * will die with SIGSEGV.
+	 */
+	if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+		return (void __user __force *)-1UL;
+
+	/* This is the X/Open sanctioned signal stack switching.  */
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		if (sas_ss_flags(sp) == 0)
+			sp = current->sas_ss_sp + current->sas_ss_size;
+	}
+
+	sp -= frame_size;
+	/*
+	 * Align the stack pointer according to the TILE ABI,
+	 * i.e. so that on function entry (sp & 15) == 0.
+	 */
+	sp &= -16UL;
+	return (void __user *) sp;
+}
+
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+			   sigset_t *set, struct pt_regs *regs)
+{
+	unsigned long restorer;
+	struct rt_sigframe __user *frame;
+	int err = 0;
+	int usig;
+
+	frame = get_sigframe(ka, regs, sizeof(*frame));
+
+	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+		goto give_sigsegv;
+
+	usig = current_thread_info()->exec_domain
+		&& current_thread_info()->exec_domain->signal_invmap
+		&& sig < 32
+		? current_thread_info()->exec_domain->signal_invmap[sig]
+		: sig;
+
+	/* Always write at least the signal number for the stack backtracer. */
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		/* At sigreturn time, restore the callee-save registers too. */
+		err |= copy_siginfo_to_user(&frame->info, info);
+		regs->flags |= PT_FLAGS_RESTORE_REGS;
+	} else {
+		err |= __put_user(info->si_signo, &frame->info.si_signo);
+	}
+
+	/* Create the ucontext.  */
+	err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
+	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(NULL, &frame->uc.uc_link);
+	err |= __put_user((void __user *)(current->sas_ss_sp),
+			  &frame->uc.uc_stack.ss_sp);
+	err |= __put_user(sas_ss_flags(regs->sp),
+			  &frame->uc.uc_stack.ss_flags);
+	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
+	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+	if (err)
+		goto give_sigsegv;
+
+	restorer = VDSO_BASE;
+	if (ka->sa.sa_flags & SA_RESTORER)
+		restorer = (unsigned long) ka->sa.sa_restorer;
+
+	/*
+	 * Set up registers for signal handler.
+	 * Registers that we don't modify keep the value they had from
+	 * user-space at the time we took the signal.
+	 */
+	regs->pc = (unsigned long) ka->sa.sa_handler;
+	regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
+	regs->sp = (unsigned long) frame;
+	regs->lr = restorer;
+	regs->regs[0] = (unsigned long) usig;
+
+	if (ka->sa.sa_flags & SA_SIGINFO) {
+		/* Need extra arguments, so mark to restore caller-saves. */
+		regs->regs[1] = (unsigned long) &frame->info;
+		regs->regs[2] = (unsigned long) &frame->uc;
+		regs->flags |= PT_FLAGS_CALLER_SAVES;
+	}
+
+	/*
+	 * Notify any tracer that was single-stepping it.
+	 * The tracer may want to single-step inside the
+	 * handler too.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		ptrace_notify(SIGTRAP);
+
+	return 0;
+
+give_sigsegv:
+	force_sigsegv(sig, current);
+	return -EFAULT;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static int handle_signal(unsigned long sig, siginfo_t *info,
+			 struct k_sigaction *ka, sigset_t *oldset,
+			 struct pt_regs *regs)
+{
+	int ret;
+
+
+	/* Are we from a system call? */
+	if (regs->faultnum == INT_SWINT_1) {
+		/* If so, check system call restarting.. */
+		switch (regs->regs[0]) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			regs->regs[0] = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				regs->regs[0] = -EINTR;
+				break;
+			}
+			/* fallthrough */
+		case -ERESTARTNOINTR:
+			/* Reload caller-saves to restore r0..r5 and r10. */
+			regs->flags |= PT_FLAGS_CALLER_SAVES;
+			regs->regs[0] = regs->orig_r0;
+			regs->pc -= 8;
+		}
+	}
+
+	/* Set up the stack frame */
+#ifdef CONFIG_COMPAT
+	if (is_compat_task())
+		ret = compat_setup_rt_frame(sig, ka, info, oldset, regs);
+	else
+#endif
+		ret = setup_rt_frame(sig, ka, info, oldset, regs);
+	if (ret == 0) {
+		/* This code is only called from system calls or from
+		 * the work_pending path in the return-to-user code, and
+		 * either way we can re-enable interrupts unconditionally.
+		 */
+		spin_lock_irq(&current->sighand->siglock);
+		sigorsets(&current->blocked,
+			  &current->blocked, &ka->sa.sa_mask);
+		if (!(ka->sa.sa_flags & SA_NODEFER))
+			sigaddset(&current->blocked, sig);
+		recalc_sigpending();
+		spin_unlock_irq(&current->sighand->siglock);
+	}
+
+	return ret;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+void do_signal(struct pt_regs *regs)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+	sigset_t *oldset;
+
+	/*
+	 * i386 will check if we're coming from kernel mode and bail out
+	 * here.  In my experience this just turns weird crashes into
+	 * weird spin-hangs.  But if we find a case where this seems
+	 * helpful, we can reinstate the check on "!user_mode(regs)".
+	 */
+
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+		oldset = &current->saved_sigmask;
+	else
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+	if (signr > 0) {
+		/* Whee! Actually deliver the signal.  */
+		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		}
+
+		return;
+	}
+
+	/* Did we come from a system call? */
+	if (regs->faultnum == INT_SWINT_1) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[0]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			regs->flags |= PT_FLAGS_CALLER_SAVES;
+			regs->regs[0] = regs->orig_r0;
+			regs->pc -= 8;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->flags |= PT_FLAGS_CALLER_SAVES;
+			regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall;
+			regs->pc -= 8;
+			break;
+		}
+	}
+
+	/* If there's no signal to deliver, just put the saved sigmask back. */
+	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+}
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
new file mode 100644
index 00000000000..5ec4b9c651f
--- /dev/null
+++ b/arch/tile/kernel/single_step.c
@@ -0,0 +1,663 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * A code-rewriter that enables instruction single-stepping.
+ * Derived from iLib's single-stepping code.
+ */
+
+#ifndef __tilegx__   /* No support for single-step yet. */
+
+/* These functions are only used on the TILE platform */
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+#include <linux/uaccess.h>
+#include <linux/mman.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/opcode-tile.h>
+#include <asm/opcode_constants.h>
+#include <arch/abi.h>
+
+#define signExtend17(val) sign_extend((val), 17)
+#define TILE_X1_MASK (0xffffffffULL << 31)
+
+int unaligned_printk;
+
+static int __init setup_unaligned_printk(char *str)
+{
+	long val;
+	if (strict_strtol(str, 0, &val) != 0)
+		return 0;
+	unaligned_printk = val;
+	pr_info("Printk for each unaligned data accesses is %s\n",
+		unaligned_printk ? "enabled" : "disabled");
+	return 1;
+}
+__setup("unaligned_printk=", setup_unaligned_printk);
+
+unsigned int unaligned_fixup_count;
+
+enum mem_op {
+	MEMOP_NONE,
+	MEMOP_LOAD,
+	MEMOP_STORE,
+	MEMOP_LOAD_POSTINCR,
+	MEMOP_STORE_POSTINCR
+};
+
+static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, int32_t offset)
+{
+	tile_bundle_bits result;
+
+	/* mask out the old offset */
+	tile_bundle_bits mask = create_BrOff_X1(-1);
+	result = n & (~mask);
+
+	/* or in the new offset */
+	result |= create_BrOff_X1(offset);
+
+	return result;
+}
+
+static inline tile_bundle_bits move_X1(tile_bundle_bits n, int dest, int src)
+{
+	tile_bundle_bits result;
+	tile_bundle_bits op;
+
+	result = n & (~TILE_X1_MASK);
+
+	op = create_Opcode_X1(SPECIAL_0_OPCODE_X1) |
+		create_RRROpcodeExtension_X1(OR_SPECIAL_0_OPCODE_X1) |
+		create_Dest_X1(dest) |
+		create_SrcB_X1(TREG_ZERO) |
+		create_SrcA_X1(src) ;
+
+	result |= op;
+	return result;
+}
+
+static inline tile_bundle_bits nop_X1(tile_bundle_bits n)
+{
+	return move_X1(n, TREG_ZERO, TREG_ZERO);
+}
+
+static inline tile_bundle_bits addi_X1(
+	tile_bundle_bits n, int dest, int src, int imm)
+{
+	n &= ~TILE_X1_MASK;
+
+	n |=  (create_SrcA_X1(src) |
+	       create_Dest_X1(dest) |
+	       create_Imm8_X1(imm) |
+	       create_S_X1(0) |
+	       create_Opcode_X1(IMM_0_OPCODE_X1) |
+	       create_ImmOpcodeExtension_X1(ADDI_IMM_0_OPCODE_X1));
+
+	return n;
+}
+
+static tile_bundle_bits rewrite_load_store_unaligned(
+	struct single_step_state *state,
+	tile_bundle_bits bundle,
+	struct pt_regs *regs,
+	enum mem_op mem_op,
+	int size, int sign_ext)
+{
+	unsigned char __user *addr;
+	int val_reg, addr_reg, err, val;
+
+	/* Get address and value registers */
+	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+		addr_reg = get_SrcA_Y2(bundle);
+		val_reg = get_SrcBDest_Y2(bundle);
+	} else if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
+		addr_reg = get_SrcA_X1(bundle);
+		val_reg  = get_Dest_X1(bundle);
+	} else {
+		addr_reg = get_SrcA_X1(bundle);
+		val_reg  = get_SrcB_X1(bundle);
+	}
+
+	/*
+	 * If registers are not GPRs, don't try to handle it.
+	 *
+	 * FIXME: we could handle non-GPR loads by getting the real value
+	 * from memory, writing it to the single step buffer, using a
+	 * temp_reg to hold a pointer to that memory, then executing that
+	 * instruction and resetting temp_reg.  For non-GPR stores, it's a
+	 * little trickier; we could use the single step buffer for that
+	 * too, but we'd have to add some more state bits so that we could
+	 * call back in here to copy that value to the real target.  For
+	 * now, we just handle the simple case.
+	 */
+	if ((val_reg >= PTREGS_NR_GPRS &&
+	     (val_reg != TREG_ZERO ||
+	      mem_op == MEMOP_LOAD ||
+	      mem_op == MEMOP_LOAD_POSTINCR)) ||
+	    addr_reg >= PTREGS_NR_GPRS)
+		return bundle;
+
+	/* If it's aligned, don't handle it specially */
+	addr = (void __user *)regs->regs[addr_reg];
+	if (((unsigned long)addr % size) == 0)
+		return bundle;
+
+#ifndef __LITTLE_ENDIAN
+# error We assume little-endian representation with copy_xx_user size 2 here
+#endif
+	/* Handle unaligned load/store */
+	if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
+		unsigned short val_16;
+		switch (size) {
+		case 2:
+			err = copy_from_user(&val_16, addr, sizeof(val_16));
+			val = sign_ext ? ((short)val_16) : val_16;
+			break;
+		case 4:
+			err = copy_from_user(&val, addr, sizeof(val));
+			break;
+		default:
+			BUG();
+		}
+		if (err == 0) {
+			state->update_reg = val_reg;
+			state->update_value = val;
+			state->update = 1;
+		}
+	} else {
+		val = (val_reg == TREG_ZERO) ? 0 : regs->regs[val_reg];
+		err = copy_to_user(addr, &val, size);
+	}
+
+	if (err) {
+		siginfo_t info = {
+			.si_signo = SIGSEGV,
+			.si_code = SEGV_MAPERR,
+			.si_addr = addr
+		};
+		force_sig_info(info.si_signo, &info, current);
+		return (tile_bundle_bits) 0;
+	}
+
+	if (unaligned_fixup == 0) {
+		siginfo_t info = {
+			.si_signo = SIGBUS,
+			.si_code = BUS_ADRALN,
+			.si_addr = addr
+		};
+		force_sig_info(info.si_signo, &info, current);
+		return (tile_bundle_bits) 0;
+	}
+
+	if (unaligned_printk || unaligned_fixup_count == 0) {
+		pr_info("Process %d/%s: PC %#lx: Fixup of"
+			" unaligned %s at %#lx.\n",
+			current->pid, current->comm, regs->pc,
+			(mem_op == MEMOP_LOAD ||
+			 mem_op == MEMOP_LOAD_POSTINCR) ?
+			"load" : "store",
+			(unsigned long)addr);
+		if (!unaligned_printk) {
+#define P pr_info
+P("\n");
+P("Unaligned fixups in the kernel will slow your application considerably.\n");
+P("To find them, write a \"1\" to /proc/sys/tile/unaligned_fixup/printk,\n");
+P("which requests the kernel show all unaligned fixups, or write a \"0\"\n");
+P("to /proc/sys/tile/unaligned_fixup/enabled, in which case each unaligned\n");
+P("access will become a SIGBUS you can debug. No further warnings will be\n");
+P("shown so as to avoid additional slowdown, but you can track the number\n");
+P("of fixups performed via /proc/sys/tile/unaligned_fixup/count.\n");
+P("Use the tile-addr2line command (see \"info addr2line\") to decode PCs.\n");
+P("\n");
+#undef P
+		}
+	}
+	++unaligned_fixup_count;
+
+	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+		/* Convert the Y2 instruction to a prefetch. */
+		bundle &= ~(create_SrcBDest_Y2(-1) |
+			    create_Opcode_Y2(-1));
+		bundle |= (create_SrcBDest_Y2(TREG_ZERO) |
+			   create_Opcode_Y2(LW_OPCODE_Y2));
+	/* Replace the load postincr with an addi */
+	} else if (mem_op == MEMOP_LOAD_POSTINCR) {
+		bundle = addi_X1(bundle, addr_reg, addr_reg,
+				 get_Imm8_X1(bundle));
+	/* Replace the store postincr with an addi */
+	} else if (mem_op == MEMOP_STORE_POSTINCR) {
+		bundle = addi_X1(bundle, addr_reg, addr_reg,
+				 get_Dest_Imm8_X1(bundle));
+	} else {
+		/* Convert the X1 instruction to a nop. */
+		bundle &= ~(create_Opcode_X1(-1) |
+			    create_UnShOpcodeExtension_X1(-1) |
+			    create_UnOpcodeExtension_X1(-1));
+		bundle |= (create_Opcode_X1(SHUN_0_OPCODE_X1) |
+			   create_UnShOpcodeExtension_X1(
+				   UN_0_SHUN_0_OPCODE_X1) |
+			   create_UnOpcodeExtension_X1(
+				   NOP_UN_0_SHUN_0_OPCODE_X1));
+	}
+
+	return bundle;
+}
+
+/**
+ * single_step_once() - entry point when single stepping has been triggered.
+ * @regs: The machine register state
+ *
+ *  When we arrive at this routine via a trampoline, the single step
+ *  engine copies the executing bundle to the single step buffer.
+ *  If the instruction is a condition branch, then the target is
+ *  reset to one past the next instruction. If the instruction
+ *  sets the lr, then that is noted. If the instruction is a jump
+ *  or call, then the new target pc is preserved and the current
+ *  bundle instruction set to null.
+ *
+ *  The necessary post-single-step rewriting information is stored in
+ *  single_step_state->  We use data segment values because the
+ *  stack will be rewound when we run the rewritten single-stepped
+ *  instruction.
+ */
+void single_step_once(struct pt_regs *regs)
+{
+	extern tile_bundle_bits __single_step_ill_insn;
+	extern tile_bundle_bits __single_step_j_insn;
+	extern tile_bundle_bits __single_step_addli_insn;
+	extern tile_bundle_bits __single_step_auli_insn;
+	struct thread_info *info = (void *)current_thread_info();
+	struct single_step_state *state = info->step_state;
+	int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
+	tile_bundle_bits __user *buffer, *pc;
+	tile_bundle_bits bundle;
+	int temp_reg;
+	int target_reg = TREG_LR;
+	int err;
+	enum mem_op mem_op = MEMOP_NONE;
+	int size = 0, sign_ext = 0;  /* happy compiler */
+
+	asm(
+"    .pushsection .rodata.single_step\n"
+"    .align 8\n"
+"    .globl    __single_step_ill_insn\n"
+"__single_step_ill_insn:\n"
+"    ill\n"
+"    .globl    __single_step_addli_insn\n"
+"__single_step_addli_insn:\n"
+"    { nop; addli r0, zero, 0 }\n"
+"    .globl    __single_step_auli_insn\n"
+"__single_step_auli_insn:\n"
+"    { nop; auli r0, r0, 0 }\n"
+"    .globl    __single_step_j_insn\n"
+"__single_step_j_insn:\n"
+"    j .\n"
+"    .popsection\n"
+	);
+
+	if (state == NULL) {
+		/* allocate a page of writable, executable memory */
+		state = kmalloc(sizeof(struct single_step_state), GFP_KERNEL);
+		if (state == NULL) {
+			pr_err("Out of kernel memory trying to single-step\n");
+			return;
+		}
+
+		/* allocate a cache line of writable, executable memory */
+		down_write(&current->mm->mmap_sem);
+		buffer = (void __user *) do_mmap(NULL, 0, 64,
+					  PROT_EXEC | PROT_READ | PROT_WRITE,
+					  MAP_PRIVATE | MAP_ANONYMOUS,
+					  0);
+		up_write(&current->mm->mmap_sem);
+
+		if (IS_ERR((void __force *)buffer)) {
+			kfree(state);
+			pr_err("Out of kernel pages trying to single-step\n");
+			return;
+		}
+
+		state->buffer = buffer;
+		state->is_enabled = 0;
+
+		info->step_state = state;
+
+		/* Validate our stored instruction patterns */
+		BUG_ON(get_Opcode_X1(__single_step_addli_insn) !=
+		       ADDLI_OPCODE_X1);
+		BUG_ON(get_Opcode_X1(__single_step_auli_insn) !=
+		       AULI_OPCODE_X1);
+		BUG_ON(get_SrcA_X1(__single_step_addli_insn) != TREG_ZERO);
+		BUG_ON(get_Dest_X1(__single_step_addli_insn) != 0);
+		BUG_ON(get_JOffLong_X1(__single_step_j_insn) != 0);
+	}
+
+	/*
+	 * If we are returning from a syscall, we still haven't hit the
+	 * "ill" for the swint1 instruction.  So back the PC up to be
+	 * pointing at the swint1, but we'll actually return directly
+	 * back to the "ill" so we come back in via SIGILL as if we
+	 * had "executed" the swint1 without ever being in kernel space.
+	 */
+	if (regs->faultnum == INT_SWINT_1)
+		regs->pc -= 8;
+
+	pc = (tile_bundle_bits __user *)(regs->pc);
+	if (get_user(bundle, pc) != 0) {
+		pr_err("Couldn't read instruction at %p trying to step\n", pc);
+		return;
+	}
+
+	/* We'll follow the instruction with 2 ill op bundles */
+	state->orig_pc = (unsigned long)pc;
+	state->next_pc = (unsigned long)(pc + 1);
+	state->branch_next_pc = 0;
+	state->update = 0;
+
+	if (!(bundle & TILE_BUNDLE_Y_ENCODING_MASK)) {
+		/* two wide, check for control flow */
+		int opcode = get_Opcode_X1(bundle);
+
+		switch (opcode) {
+		/* branches */
+		case BRANCH_OPCODE_X1:
+		{
+			int32_t offset = signExtend17(get_BrOff_X1(bundle));
+
+			/*
+			 * For branches, we use a rewriting trick to let the
+			 * hardware evaluate whether the branch is taken or
+			 * untaken.  We record the target offset and then
+			 * rewrite the branch instruction to target 1 insn
+			 * ahead if the branch is taken.  We then follow the
+			 * rewritten branch with two bundles, each containing
+			 * an "ill" instruction. The supervisor examines the
+			 * pc after the single step code is executed, and if
+			 * the pc is the first ill instruction, then the
+			 * branch (if any) was not taken.  If the pc is the
+			 * second ill instruction, then the branch was
+			 * taken. The new pc is computed for these cases, and
+			 * inserted into the registers for the thread.  If
+			 * the pc is the start of the single step code, then
+			 * an exception or interrupt was taken before the
+			 * code started processing, and the same "original"
+			 * pc is restored.  This change, different from the
+			 * original implementation, has the advantage of
+			 * executing a single user instruction.
+			 */
+			state->branch_next_pc = (unsigned long)(pc + offset);
+
+			/* rewrite branch offset to go forward one bundle */
+			bundle = set_BrOff_X1(bundle, 2);
+		}
+		break;
+
+		/* jumps */
+		case JALB_OPCODE_X1:
+		case JALF_OPCODE_X1:
+			state->update = 1;
+			state->next_pc =
+				(unsigned long) (pc + get_JOffLong_X1(bundle));
+			break;
+
+		case JB_OPCODE_X1:
+		case JF_OPCODE_X1:
+			state->next_pc =
+				(unsigned long) (pc + get_JOffLong_X1(bundle));
+			bundle = nop_X1(bundle);
+			break;
+
+		case SPECIAL_0_OPCODE_X1:
+			switch (get_RRROpcodeExtension_X1(bundle)) {
+			/* jump-register */
+			case JALRP_SPECIAL_0_OPCODE_X1:
+			case JALR_SPECIAL_0_OPCODE_X1:
+				state->update = 1;
+				state->next_pc =
+					regs->regs[get_SrcA_X1(bundle)];
+				break;
+
+			case JRP_SPECIAL_0_OPCODE_X1:
+			case JR_SPECIAL_0_OPCODE_X1:
+				state->next_pc =
+					regs->regs[get_SrcA_X1(bundle)];
+				bundle = nop_X1(bundle);
+				break;
+
+			case LNK_SPECIAL_0_OPCODE_X1:
+				state->update = 1;
+				target_reg = get_Dest_X1(bundle);
+				break;
+
+			/* stores */
+			case SH_SPECIAL_0_OPCODE_X1:
+				mem_op = MEMOP_STORE;
+				size = 2;
+				break;
+
+			case SW_SPECIAL_0_OPCODE_X1:
+				mem_op = MEMOP_STORE;
+				size = 4;
+				break;
+			}
+			break;
+
+		/* loads and iret */
+		case SHUN_0_OPCODE_X1:
+			if (get_UnShOpcodeExtension_X1(bundle) ==
+			    UN_0_SHUN_0_OPCODE_X1) {
+				switch (get_UnOpcodeExtension_X1(bundle)) {
+				case LH_UN_0_SHUN_0_OPCODE_X1:
+					mem_op = MEMOP_LOAD;
+					size = 2;
+					sign_ext = 1;
+					break;
+
+				case LH_U_UN_0_SHUN_0_OPCODE_X1:
+					mem_op = MEMOP_LOAD;
+					size = 2;
+					sign_ext = 0;
+					break;
+
+				case LW_UN_0_SHUN_0_OPCODE_X1:
+					mem_op = MEMOP_LOAD;
+					size = 4;
+					break;
+
+				case IRET_UN_0_SHUN_0_OPCODE_X1:
+				{
+					unsigned long ex0_0 = __insn_mfspr(
+						SPR_EX_CONTEXT_0_0);
+					unsigned long ex0_1 = __insn_mfspr(
+						SPR_EX_CONTEXT_0_1);
+					/*
+					 * Special-case it if we're iret'ing
+					 * to PL0 again.  Otherwise just let
+					 * it run and it will generate SIGILL.
+					 */
+					if (EX1_PL(ex0_1) == USER_PL) {
+						state->next_pc = ex0_0;
+						regs->ex1 = ex0_1;
+						bundle = nop_X1(bundle);
+					}
+				}
+				}
+			}
+			break;
+
+#if CHIP_HAS_WH64()
+		/* postincrement operations */
+		case IMM_0_OPCODE_X1:
+			switch (get_ImmOpcodeExtension_X1(bundle)) {
+			case LWADD_IMM_0_OPCODE_X1:
+				mem_op = MEMOP_LOAD_POSTINCR;
+				size = 4;
+				break;
+
+			case LHADD_IMM_0_OPCODE_X1:
+				mem_op = MEMOP_LOAD_POSTINCR;
+				size = 2;
+				sign_ext = 1;
+				break;
+
+			case LHADD_U_IMM_0_OPCODE_X1:
+				mem_op = MEMOP_LOAD_POSTINCR;
+				size = 2;
+				sign_ext = 0;
+				break;
+
+			case SWADD_IMM_0_OPCODE_X1:
+				mem_op = MEMOP_STORE_POSTINCR;
+				size = 4;
+				break;
+
+			case SHADD_IMM_0_OPCODE_X1:
+				mem_op = MEMOP_STORE_POSTINCR;
+				size = 2;
+				break;
+
+			default:
+				break;
+			}
+			break;
+#endif /* CHIP_HAS_WH64() */
+		}
+
+		if (state->update) {
+			/*
+			 * Get an available register.  We start with a
+			 * bitmask with 1's for available registers.
+			 * We truncate to the low 32 registers since
+			 * we are guaranteed to have set bits in the
+			 * low 32 bits, then use ctz to pick the first.
+			 */
+			u32 mask = (u32) ~((1ULL << get_Dest_X0(bundle)) |
+					   (1ULL << get_SrcA_X0(bundle)) |
+					   (1ULL << get_SrcB_X0(bundle)) |
+					   (1ULL << target_reg));
+			temp_reg = __builtin_ctz(mask);
+			state->update_reg = temp_reg;
+			state->update_value = regs->regs[temp_reg];
+			regs->regs[temp_reg] = (unsigned long) (pc+1);
+			regs->flags |= PT_FLAGS_RESTORE_REGS;
+			bundle = move_X1(bundle, target_reg, temp_reg);
+		}
+	} else {
+		int opcode = get_Opcode_Y2(bundle);
+
+		switch (opcode) {
+		/* loads */
+		case LH_OPCODE_Y2:
+			mem_op = MEMOP_LOAD;
+			size = 2;
+			sign_ext = 1;
+			break;
+
+		case LH_U_OPCODE_Y2:
+			mem_op = MEMOP_LOAD;
+			size = 2;
+			sign_ext = 0;
+			break;
+
+		case LW_OPCODE_Y2:
+			mem_op = MEMOP_LOAD;
+			size = 4;
+			break;
+
+		/* stores */
+		case SH_OPCODE_Y2:
+			mem_op = MEMOP_STORE;
+			size = 2;
+			break;
+
+		case SW_OPCODE_Y2:
+			mem_op = MEMOP_STORE;
+			size = 4;
+			break;
+		}
+	}
+
+	/*
+	 * Check if we need to rewrite an unaligned load/store.
+	 * Returning zero is a special value meaning we need to SIGSEGV.
+	 */
+	if (mem_op != MEMOP_NONE && unaligned_fixup >= 0) {
+		bundle = rewrite_load_store_unaligned(state, bundle, regs,
+						      mem_op, size, sign_ext);
+		if (bundle == 0)
+			return;
+	}
+
+	/* write the bundle to our execution area */
+	buffer = state->buffer;
+	err = __put_user(bundle, buffer++);
+
+	/*
+	 * If we're really single-stepping, we take an INT_ILL after.
+	 * If we're just handling an unaligned access, we can just
+	 * jump directly back to where we were in user code.
+	 */
+	if (is_single_step) {
+		err |= __put_user(__single_step_ill_insn, buffer++);
+		err |= __put_user(__single_step_ill_insn, buffer++);
+	} else {
+		long delta;
+
+		if (state->update) {
+			/* We have some state to update; do it inline */
+			int ha16;
+			bundle = __single_step_addli_insn;
+			bundle |= create_Dest_X1(state->update_reg);
+			bundle |= create_Imm16_X1(state->update_value);
+			err |= __put_user(bundle, buffer++);
+			bundle = __single_step_auli_insn;
+			bundle |= create_Dest_X1(state->update_reg);
+			bundle |= create_SrcA_X1(state->update_reg);
+			ha16 = (state->update_value + 0x8000) >> 16;
+			bundle |= create_Imm16_X1(ha16);
+			err |= __put_user(bundle, buffer++);
+			state->update = 0;
+		}
+
+		/* End with a jump back to the next instruction */
+		delta = ((regs->pc + TILE_BUNDLE_SIZE_IN_BYTES) -
+			(unsigned long)buffer) >>
+			TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES;
+		bundle = __single_step_j_insn;
+		bundle |= create_JOffLong_X1(delta);
+		err |= __put_user(bundle, buffer++);
+	}
+
+	if (err) {
+		pr_err("Fault when writing to single-step buffer\n");
+		return;
+	}
+
+	/*
+	 * Flush the buffer.
+	 * We do a local flush only, since this is a thread-specific buffer.
+	 */
+	__flush_icache_range((unsigned long)state->buffer,
+			     (unsigned long)buffer);
+
+	/* Indicate enabled */
+	state->is_enabled = is_single_step;
+	regs->pc = (unsigned long)state->buffer;
+
+	/* Fault immediately if we are coming back from a syscall. */
+	if (regs->faultnum == INT_SWINT_1)
+		regs->pc += 8;
+}
+
+#endif /* !__tilegx__ */
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
new file mode 100644
index 00000000000..1cb5ec79de0
--- /dev/null
+++ b/arch/tile/kernel/smp.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE SMP support routines.
+ */
+
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/cacheflush.h>
+
+HV_Topology smp_topology __write_once;
+EXPORT_SYMBOL(smp_topology);
+
+#if CHIP_HAS_IPI()
+static unsigned long __iomem *ipi_mappings[NR_CPUS];
+#endif
+
+
+/*
+ * Top-level send_IPI*() functions to send messages to other cpus.
+ */
+
+/* Set by smp_send_stop() to avoid recursive panics. */
+static int stopping_cpus;
+
+void send_IPI_single(int cpu, int tag)
+{
+	HV_Recipient recip = {
+		.y = cpu / smp_width,
+		.x = cpu % smp_width,
+		.state = HV_TO_BE_SENT
+	};
+	int rc = hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag));
+	BUG_ON(rc <= 0);
+}
+
+void send_IPI_many(const struct cpumask *mask, int tag)
+{
+	HV_Recipient recip[NR_CPUS];
+	int cpu, sent;
+	int nrecip = 0;
+	int my_cpu = smp_processor_id();
+	for_each_cpu(cpu, mask) {
+		HV_Recipient *r;
+		BUG_ON(cpu == my_cpu);
+		r = &recip[nrecip++];
+		r->y = cpu / smp_width;
+		r->x = cpu % smp_width;
+		r->state = HV_TO_BE_SENT;
+	}
+	sent = 0;
+	while (sent < nrecip) {
+		int rc = hv_send_message(recip, nrecip,
+					 (HV_VirtAddr)&tag, sizeof(tag));
+		if (rc <= 0) {
+			if (!stopping_cpus)  /* avoid recursive panic */
+				panic("hv_send_message returned %d", rc);
+			break;
+		}
+		sent += rc;
+	}
+}
+
+void send_IPI_allbutself(int tag)
+{
+	struct cpumask mask;
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	send_IPI_many(&mask, tag);
+}
+
+
+/*
+ * Provide smp_call_function_mask, but also run function locally
+ * if specified in the mask.
+ */
+void on_each_cpu_mask(const struct cpumask *mask, void (*func)(void *),
+		      void *info, bool wait)
+{
+	int cpu = get_cpu();
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(cpu, mask)) {
+		local_irq_disable();
+		func(info);
+		local_irq_enable();
+	}
+	put_cpu();
+}
+
+
+/*
+ * Functions related to starting/stopping cpus.
+ */
+
+/* Handler to start the current cpu. */
+static void smp_start_cpu_interrupt(void)
+{
+	get_irq_regs()->pc = start_cpu_function_addr;
+}
+
+/* Handler to stop the current cpu. */
+static void smp_stop_cpu_interrupt(void)
+{
+	set_cpu_online(smp_processor_id(), 0);
+	raw_local_irq_disable_all();
+	for (;;)
+		asm("nap");
+}
+
+/* This function calls the 'stop' function on all other CPUs in the system. */
+void smp_send_stop(void)
+{
+	stopping_cpus = 1;
+	send_IPI_allbutself(MSG_TAG_STOP_CPU);
+}
+
+
+/*
+ * Dispatch code called from hv_message_intr() for HV_MSG_TILE hv messages.
+ */
+void evaluate_message(int tag)
+{
+	switch (tag) {
+	case MSG_TAG_START_CPU: /* Start up a cpu */
+		smp_start_cpu_interrupt();
+		break;
+
+	case MSG_TAG_STOP_CPU: /* Sent to shut down slave CPU's */
+		smp_stop_cpu_interrupt();
+		break;
+
+	case MSG_TAG_CALL_FUNCTION_MANY: /* Call function on cpumask */
+		generic_smp_call_function_interrupt();
+		break;
+
+	case MSG_TAG_CALL_FUNCTION_SINGLE: /* Call function on one other CPU */
+		generic_smp_call_function_single_interrupt();
+		break;
+
+	default:
+		panic("Unknown IPI message tag %d", tag);
+		break;
+	}
+}
+
+
+/*
+ * flush_icache_range() code uses smp_call_function().
+ */
+
+struct ipi_flush {
+	unsigned long start;
+	unsigned long end;
+};
+
+static void ipi_flush_icache_range(void *info)
+{
+	struct ipi_flush *flush = (struct ipi_flush *) info;
+	__flush_icache_range(flush->start, flush->end);
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	struct ipi_flush flush = { start, end };
+	preempt_disable();
+	on_each_cpu(ipi_flush_icache_range, &flush, 1);
+	preempt_enable();
+}
+
+
+/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
+static irqreturn_t handle_reschedule_ipi(int irq, void *token)
+{
+	/*
+	 * Nothing to do here; when we return from interrupt, the
+	 * rescheduling will occur there. But do bump the interrupt
+	 * profiler count in the meantime.
+	 */
+	__get_cpu_var(irq_stat).irq_resched_count++;
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction resched_action = {
+	.handler = handle_reschedule_ipi,
+	.name = "resched",
+	.dev_id = handle_reschedule_ipi /* unique token */,
+};
+
+void __init ipi_init(void)
+{
+#if CHIP_HAS_IPI()
+	int cpu;
+	/* Map IPI trigger MMIO addresses. */
+	for_each_possible_cpu(cpu) {
+		HV_Coord tile;
+		HV_PTE pte;
+		unsigned long offset;
+
+		tile.x = cpu_x(cpu);
+		tile.y = cpu_y(cpu);
+		if (hv_get_ipi_pte(tile, 1, &pte) != 0)
+			panic("Failed to initialize IPI for cpu %d\n", cpu);
+
+		offset = hv_pte_get_pfn(pte) << PAGE_SHIFT;
+		ipi_mappings[cpu] = ioremap_prot(offset, PAGE_SIZE, pte);
+	}
+#endif
+
+	/* Bind handle_reschedule_ipi() to IRQ_RESCHEDULE. */
+	tile_irq_activate(IRQ_RESCHEDULE, TILE_IRQ_PERCPU);
+	BUG_ON(setup_irq(IRQ_RESCHEDULE, &resched_action));
+}
+
+#if CHIP_HAS_IPI()
+
+void smp_send_reschedule(int cpu)
+{
+	WARN_ON(cpu_is_offline(cpu));
+
+	/*
+	 * We just want to do an MMIO store.  The traditional writeq()
+	 * functions aren't really correct here, since they're always
+	 * directed at the PCI shim.  For now, just do a raw store,
+	 * casting away the __iomem attribute.
+	 */
+	((unsigned long __force *)ipi_mappings[cpu])[IRQ_RESCHEDULE] = 0;
+}
+
+#else
+
+void smp_send_reschedule(int cpu)
+{
+	HV_Coord coord;
+
+	WARN_ON(cpu_is_offline(cpu));
+
+	coord.y = cpu_y(cpu);
+	coord.x = cpu_x(cpu);
+	hv_trigger_ipi(coord, IRQ_RESCHEDULE);
+}
+
+#endif /* CHIP_HAS_IPI() */
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
new file mode 100644
index 00000000000..74d62d098ed
--- /dev/null
+++ b/arch/tile/kernel/smpboot.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/smp_lock.h>
+#include <linux/bootmem.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+
+/* State of each CPU. */
+static DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+/* The messaging code jumps to this pointer during boot-up */
+unsigned long start_cpu_function_addr;
+
+/* Called very early during startup to mark boot cpu as online */
+void __init smp_prepare_boot_cpu(void)
+{
+	int cpu = smp_processor_id();
+	set_cpu_online(cpu, 1);
+	set_cpu_present(cpu, 1);
+	__get_cpu_var(cpu_state) = CPU_ONLINE;
+
+	init_messaging();
+}
+
+static void start_secondary(void);
+
+/*
+ * Called at the top of init() to launch all the other CPUs.
+ * They run free to complete their initialization and then wait
+ * until they get an IPI from the boot cpu to come online.
+ */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	long rc;
+	int cpu, cpu_count;
+	int boot_cpu = smp_processor_id();
+
+	current_thread_info()->cpu = boot_cpu;
+
+	/*
+	 * Pin this task to the boot CPU while we bring up the others,
+	 * just to make sure we don't uselessly migrate as they come up.
+	 */
+	rc = sched_setaffinity(current->pid, cpumask_of(boot_cpu));
+	if (rc != 0)
+		pr_err("Couldn't set init affinity to boot cpu (%ld)\n", rc);
+
+	/* Print information about disabled and dataplane cpus. */
+	print_disabled_cpus();
+
+	/*
+	 * Tell the messaging subsystem how to respond to the
+	 * startup message.  We use a level of indirection to avoid
+	 * confusing the linker with the fact that the messaging
+	 * subsystem is calling __init code.
+	 */
+	start_cpu_function_addr = (unsigned long) &online_secondary;
+
+	/* Set up thread context for all new processors. */
+	cpu_count = 1;
+	for (cpu = 0; cpu < NR_CPUS; ++cpu)	{
+		struct task_struct *idle;
+
+		if (cpu == boot_cpu)
+			continue;
+
+		if (!cpu_possible(cpu)) {
+			/*
+			 * Make this processor do nothing on boot.
+			 * Note that we don't give the boot_pc function
+			 * a stack, so it has to be assembly code.
+			 */
+			per_cpu(boot_sp, cpu) = 0;
+			per_cpu(boot_pc, cpu) = (unsigned long) smp_nap;
+			continue;
+		}
+
+		/* Create a new idle thread to run start_secondary() */
+		idle = fork_idle(cpu);
+		if (IS_ERR(idle))
+			panic("failed fork for CPU %d", cpu);
+		idle->thread.pc = (unsigned long) start_secondary;
+
+		/* Make this thread the boot thread for this processor */
+		per_cpu(boot_sp, cpu) = task_ksp0(idle);
+		per_cpu(boot_pc, cpu) = idle->thread.pc;
+
+		++cpu_count;
+	}
+	BUG_ON(cpu_count > (max_cpus ? max_cpus : 1));
+
+	/* Fire up the other tiles, if any */
+	init_cpu_present(cpu_possible_mask);
+	if (cpumask_weight(cpu_present_mask) > 1) {
+		mb();  /* make sure all data is visible to new processors */
+		hv_start_all_tiles();
+	}
+}
+
+static __initdata struct cpumask init_affinity;
+
+static __init int reset_init_affinity(void)
+{
+	long rc = sched_setaffinity(current->pid, &init_affinity);
+	if (rc != 0)
+		pr_warning("couldn't reset init affinity (%ld)\n",
+		       rc);
+	return 0;
+}
+late_initcall(reset_init_affinity);
+
+static struct cpumask cpu_started __cpuinitdata;
+
+/*
+ * Activate a secondary processor.  Very minimal; don't add anything
+ * to this path without knowing what you're doing, since SMP booting
+ * is pretty fragile.
+ */
+static void __cpuinit start_secondary(void)
+{
+	int cpuid = smp_processor_id();
+
+	/* Set our thread pointer appropriately. */
+	set_my_cpu_offset(__per_cpu_offset[cpuid]);
+
+	preempt_disable();
+
+	/*
+	 * In large machines even this will slow us down, since we
+	 * will be contending for for the printk spinlock.
+	 */
+	/* printk(KERN_DEBUG "Initializing CPU#%d\n", cpuid); */
+
+	/* Initialize the current asid for our first page table. */
+	__get_cpu_var(current_asid) = min_asid;
+
+	/* Set up this thread as another owner of the init_mm */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+	if (current->mm)
+		BUG();
+	enter_lazy_tlb(&init_mm, current);
+
+	/* Allow hypervisor messages to be received */
+	init_messaging();
+	local_irq_enable();
+
+	/* Indicate that we're ready to come up. */
+	/* Must not do this before we're ready to receive messages */
+	if (cpumask_test_and_set_cpu(cpuid, &cpu_started)) {
+		pr_warning("CPU#%d already started!\n", cpuid);
+		for (;;)
+			local_irq_enable();
+	}
+
+	smp_nap();
+}
+
+/*
+ * Bring a secondary processor online.
+ */
+void __cpuinit online_secondary(void)
+{
+	/*
+	 * low-memory mappings have been cleared, flush them from
+	 * the local TLBs too.
+	 */
+	local_flush_tlb();
+
+	BUG_ON(in_interrupt());
+
+	/* This must be done before setting cpu_online_mask */
+	wmb();
+
+	/*
+	 * We need to hold call_lock, so there is no inconsistency
+	 * between the time smp_call_function() determines number of
+	 * IPI recipients, and the time when the determination is made
+	 * for which cpus receive the IPI. Holding this
+	 * lock helps us to not include this cpu in a currently in progress
+	 * smp_call_function().
+	 */
+	ipi_call_lock();
+	set_cpu_online(smp_processor_id(), 1);
+	ipi_call_unlock();
+	__get_cpu_var(cpu_state) = CPU_ONLINE;
+
+	/* Set up tile-specific state for this cpu. */
+	setup_cpu(0);
+
+	/* Set up tile-timer clock-event device on this cpu */
+	setup_tile_timer();
+
+	preempt_enable();
+
+	cpu_idle();
+}
+
+int __cpuinit __cpu_up(unsigned int cpu)
+{
+	/* Wait 5s total for all CPUs for them to come online */
+	static int timeout;
+	for (; !cpumask_test_cpu(cpu, &cpu_started); timeout++) {
+		if (timeout >= 50000) {
+			pr_info("skipping unresponsive cpu%d\n", cpu);
+			local_irq_enable();
+			return -EIO;
+		}
+		udelay(100);
+	}
+
+	local_irq_enable();
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+
+	/* Unleash the CPU! */
+	send_IPI_single(cpu, MSG_TAG_START_CPU);
+	while (!cpumask_test_cpu(cpu, cpu_online_mask))
+		cpu_relax();
+	return 0;
+}
+
+static void panic_start_cpu(void)
+{
+	panic("Received a MSG_START_CPU IPI after boot finished.");
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	int cpu, next, rc;
+
+	/* Reset the response to a (now illegal) MSG_START_CPU IPI. */
+	start_cpu_function_addr = (unsigned long) &panic_start_cpu;
+
+	cpumask_copy(&init_affinity, cpu_online_mask);
+
+	/*
+	 * Pin ourselves to a single cpu in the initial affinity set
+	 * so that kernel mappings for the rootfs are not in the dataplane,
+	 * if set, and to avoid unnecessary migrating during bringup.
+	 * Use the last cpu just in case the whole chip has been
+	 * isolated from the scheduler, to keep init away from likely
+	 * more useful user code.  This also ensures that work scheduled
+	 * via schedule_delayed_work() in the init routines will land
+	 * on this cpu.
+	 */
+	for (cpu = cpumask_first(&init_affinity);
+	     (next = cpumask_next(cpu, &init_affinity)) < nr_cpu_ids;
+	     cpu = next)
+		;
+	rc = sched_setaffinity(current->pid, cpumask_of(cpu));
+	if (rc != 0)
+		pr_err("Couldn't set init affinity to cpu %d (%d)\n", cpu, rc);
+}
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
new file mode 100644
index 00000000000..b6268d3ae86
--- /dev/null
+++ b/arch/tile/kernel/stack.c
@@ -0,0 +1,486 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/kallsyms.h>
+#include <linux/stacktrace.h>
+#include <linux/uaccess.h>
+#include <linux/mmzone.h>
+#include <asm/backtrace.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <asm/stack.h>
+#include <arch/abi.h>
+#include <arch/interrupts.h>
+
+
+/* Is address on the specified kernel stack? */
+static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp)
+{
+	ulong kstack_base = (ulong) kbt->task->stack;
+	if (kstack_base == 0)  /* corrupt task pointer; just follow stack... */
+		return sp >= PAGE_OFFSET && sp < (unsigned long)high_memory;
+	return sp >= kstack_base && sp < kstack_base + THREAD_SIZE;
+}
+
+/* Is address in the specified kernel code? */
+static int in_kernel_text(VirtualAddress address)
+{
+	return (address >= MEM_SV_INTRPT &&
+		address < MEM_SV_INTRPT + HPAGE_SIZE);
+}
+
+/* Is address valid for reading? */
+static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address)
+{
+	HV_PTE *l1_pgtable = kbt->pgtable;
+	HV_PTE *l2_pgtable;
+	unsigned long pfn;
+	HV_PTE pte;
+	struct page *page;
+
+	if (l1_pgtable == NULL)
+		return 0;	/* can't read user space in other tasks */
+
+	pte = l1_pgtable[HV_L1_INDEX(address)];
+	if (!hv_pte_get_present(pte))
+		return 0;
+	pfn = hv_pte_get_pfn(pte);
+	if (pte_huge(pte)) {
+		if (!pfn_valid(pfn)) {
+			pr_err("huge page has bad pfn %#lx\n", pfn);
+			return 0;
+		}
+		return hv_pte_get_present(pte) && hv_pte_get_readable(pte);
+	}
+
+	page = pfn_to_page(pfn);
+	if (PageHighMem(page)) {
+		pr_err("L2 page table not in LOWMEM (%#llx)\n",
+		       HV_PFN_TO_CPA(pfn));
+		return 0;
+	}
+	l2_pgtable = (HV_PTE *)pfn_to_kaddr(pfn);
+	pte = l2_pgtable[HV_L2_INDEX(address)];
+	return hv_pte_get_present(pte) && hv_pte_get_readable(pte);
+}
+
+/* Callback for backtracer; basically a glorified memcpy */
+static bool read_memory_func(void *result, VirtualAddress address,
+			     unsigned int size, void *vkbt)
+{
+	int retval;
+	struct KBacktraceIterator *kbt = (struct KBacktraceIterator *)vkbt;
+	if (in_kernel_text(address)) {
+		/* OK to read kernel code. */
+	} else if (address >= PAGE_OFFSET) {
+		/* We only tolerate kernel-space reads of this task's stack */
+		if (!in_kernel_stack(kbt, address))
+			return 0;
+	} else if (!valid_address(kbt, address)) {
+		return 0;	/* invalid user-space address */
+	}
+	pagefault_disable();
+	retval = __copy_from_user_inatomic(result,
+					   (void __user __force *)address,
+					   size);
+	pagefault_enable();
+	return (retval == 0);
+}
+
+/* Return a pt_regs pointer for a valid fault handler frame */
+static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
+{
+#ifndef __tilegx__
+	const char *fault = NULL;  /* happy compiler */
+	char fault_buf[64];
+	VirtualAddress sp = kbt->it.sp;
+	struct pt_regs *p;
+
+	if (!in_kernel_stack(kbt, sp))
+		return NULL;
+	if (!in_kernel_stack(kbt, sp + C_ABI_SAVE_AREA_SIZE + PTREGS_SIZE-1))
+		return NULL;
+	p = (struct pt_regs *)(sp + C_ABI_SAVE_AREA_SIZE);
+	if (p->faultnum == INT_SWINT_1 || p->faultnum == INT_SWINT_1_SIGRETURN)
+		fault = "syscall";
+	else {
+		if (kbt->verbose) {     /* else we aren't going to use it */
+			snprintf(fault_buf, sizeof(fault_buf),
+				 "interrupt %ld", p->faultnum);
+			fault = fault_buf;
+		}
+	}
+	if (EX1_PL(p->ex1) == KERNEL_PL &&
+	    in_kernel_text(p->pc) &&
+	    in_kernel_stack(kbt, p->sp) &&
+	    p->sp >= sp) {
+		if (kbt->verbose)
+			pr_err("  <%s while in kernel mode>\n", fault);
+	} else if (EX1_PL(p->ex1) == USER_PL &&
+	    p->pc < PAGE_OFFSET &&
+	    p->sp < PAGE_OFFSET) {
+		if (kbt->verbose)
+			pr_err("  <%s while in user mode>\n", fault);
+	} else if (kbt->verbose) {
+		pr_err("  (odd fault: pc %#lx, sp %#lx, ex1 %#lx?)\n",
+		       p->pc, p->sp, p->ex1);
+		p = NULL;
+	}
+	if (!kbt->profile || (INT_MASK(p->faultnum) & QUEUED_INTERRUPTS) == 0)
+		return p;
+#endif
+	return NULL;
+}
+
+/* Is the pc pointing to a sigreturn trampoline? */
+static int is_sigreturn(VirtualAddress pc)
+{
+	return (pc == VDSO_BASE);
+}
+
+/* Return a pt_regs pointer for a valid signal handler frame */
+static struct pt_regs *valid_sigframe(struct KBacktraceIterator* kbt)
+{
+	BacktraceIterator *b = &kbt->it;
+
+	if (b->pc == VDSO_BASE) {
+		struct rt_sigframe *frame;
+		unsigned long sigframe_top =
+			b->sp + sizeof(struct rt_sigframe) - 1;
+		if (!valid_address(kbt, b->sp) ||
+		    !valid_address(kbt, sigframe_top)) {
+			if (kbt->verbose)
+				pr_err("  (odd signal: sp %#lx?)\n",
+				       (unsigned long)(b->sp));
+			return NULL;
+		}
+		frame = (struct rt_sigframe *)b->sp;
+		if (kbt->verbose) {
+			pr_err("  <received signal %d>\n",
+			       frame->info.si_signo);
+		}
+		return &frame->uc.uc_mcontext.regs;
+	}
+	return NULL;
+}
+
+static int KBacktraceIterator_is_sigreturn(struct KBacktraceIterator *kbt)
+{
+	return is_sigreturn(kbt->it.pc);
+}
+
+static int KBacktraceIterator_restart(struct KBacktraceIterator *kbt)
+{
+	struct pt_regs *p;
+
+	p = valid_fault_handler(kbt);
+	if (p == NULL)
+		p = valid_sigframe(kbt);
+	if (p == NULL)
+		return 0;
+	backtrace_init(&kbt->it, read_memory_func, kbt,
+		       p->pc, p->lr, p->sp, p->regs[52]);
+	kbt->new_context = 1;
+	return 1;
+}
+
+/* Find a frame that isn't a sigreturn, if there is one. */
+static int KBacktraceIterator_next_item_inclusive(
+	struct KBacktraceIterator *kbt)
+{
+	for (;;) {
+		do {
+			if (!KBacktraceIterator_is_sigreturn(kbt))
+				return 1;
+		} while (backtrace_next(&kbt->it));
+
+		if (!KBacktraceIterator_restart(kbt))
+			return 0;
+	}
+}
+
+/*
+ * If the current sp is on a page different than what we recorded
+ * as the top-of-kernel-stack last time we context switched, we have
+ * probably blown the stack, and nothing is going to work out well.
+ * If we can at least get out a warning, that may help the debug,
+ * though we probably won't be able to backtrace into the code that
+ * actually did the recursive damage.
+ */
+static void validate_stack(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	unsigned long ksp0 = get_current_ksp0();
+	unsigned long ksp0_base = ksp0 - THREAD_SIZE;
+	unsigned long sp = stack_pointer;
+
+	if (EX1_PL(regs->ex1) == KERNEL_PL && regs->sp >= ksp0) {
+		pr_err("WARNING: cpu %d: kernel stack page %#lx underrun!\n"
+		       "  sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
+		       cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+	}
+
+	else if (sp < ksp0_base + sizeof(struct thread_info)) {
+		pr_err("WARNING: cpu %d: kernel stack page %#lx overrun!\n"
+		       "  sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
+		       cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+	}
+}
+
+void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
+			     struct task_struct *t, struct pt_regs *regs)
+{
+	VirtualAddress pc, lr, sp, r52;
+	int is_current;
+
+	/*
+	 * Set up callback information.  We grab the kernel stack base
+	 * so we will allow reads of that address range, and if we're
+	 * asking about the current process we grab the page table
+	 * so we can check user accesses before trying to read them.
+	 * We flush the TLB to avoid any weird skew issues.
+	 */
+	is_current = (t == NULL);
+	kbt->is_current = is_current;
+	if (is_current)
+		t = validate_current();
+	kbt->task = t;
+	kbt->pgtable = NULL;
+	kbt->verbose = 0;   /* override in caller if desired */
+	kbt->profile = 0;   /* override in caller if desired */
+	kbt->end = 0;
+	kbt->new_context = 0;
+	if (is_current) {
+		HV_PhysAddr pgdir_pa = hv_inquire_context().page_table;
+		if (pgdir_pa == (unsigned long)swapper_pg_dir - PAGE_OFFSET) {
+			/*
+			 * Not just an optimization: this also allows
+			 * this to work at all before va/pa mappings
+			 * are set up.
+			 */
+			kbt->pgtable = swapper_pg_dir;
+		} else {
+			struct page *page = pfn_to_page(PFN_DOWN(pgdir_pa));
+			if (!PageHighMem(page))
+				kbt->pgtable = __va(pgdir_pa);
+			else
+				pr_err("page table not in LOWMEM"
+				       " (%#llx)\n", pgdir_pa);
+		}
+		local_flush_tlb_all();
+		validate_stack(regs);
+	}
+
+	if (regs == NULL) {
+		if (is_current || t->state == TASK_RUNNING) {
+			/* Can't do this; we need registers */
+			kbt->end = 1;
+			return;
+		}
+		pc = get_switch_to_pc();
+		lr = t->thread.pc;
+		sp = t->thread.ksp;
+		r52 = 0;
+	} else {
+		pc = regs->pc;
+		lr = regs->lr;
+		sp = regs->sp;
+		r52 = regs->regs[52];
+	}
+
+	backtrace_init(&kbt->it, read_memory_func, kbt, pc, lr, sp, r52);
+	kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+}
+EXPORT_SYMBOL(KBacktraceIterator_init);
+
+int KBacktraceIterator_end(struct KBacktraceIterator *kbt)
+{
+	return kbt->end;
+}
+EXPORT_SYMBOL(KBacktraceIterator_end);
+
+void KBacktraceIterator_next(struct KBacktraceIterator *kbt)
+{
+	kbt->new_context = 0;
+	if (!backtrace_next(&kbt->it) &&
+	    !KBacktraceIterator_restart(kbt)) {
+			kbt->end = 1;
+			return;
+		}
+
+	kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+}
+EXPORT_SYMBOL(KBacktraceIterator_next);
+
+/*
+ * This method wraps the backtracer's more generic support.
+ * It is only invoked from the architecture-specific code; show_stack()
+ * and dump_stack() (in entry.S) are architecture-independent entry points.
+ */
+void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
+{
+	int i;
+
+	if (headers) {
+		/*
+		 * Add a blank line since if we are called from panic(),
+		 * then bust_spinlocks() spit out a space in front of us
+		 * and it will mess up our KERN_ERR.
+		 */
+		pr_err("\n");
+		pr_err("Starting stack dump of tid %d, pid %d (%s)"
+		       " on cpu %d at cycle %lld\n",
+		       kbt->task->pid, kbt->task->tgid, kbt->task->comm,
+		       smp_processor_id(), get_cycles());
+	}
+#ifdef __tilegx__
+	if (kbt->is_current) {
+		__insn_mtspr(SPR_SIM_CONTROL,
+			     SIM_DUMP_SPR_ARG(SIM_DUMP_BACKTRACE));
+	}
+#endif
+	kbt->verbose = 1;
+	i = 0;
+	for (; !KBacktraceIterator_end(kbt); KBacktraceIterator_next(kbt)) {
+		char *modname;
+		const char *name;
+		unsigned long address = kbt->it.pc;
+		unsigned long offset, size;
+		char namebuf[KSYM_NAME_LEN+100];
+
+		if (address >= PAGE_OFFSET)
+			name = kallsyms_lookup(address, &size, &offset,
+					       &modname, namebuf);
+		else
+			name = NULL;
+
+		if (!name)
+			namebuf[0] = '\0';
+		else {
+			size_t namelen = strlen(namebuf);
+			size_t remaining = (sizeof(namebuf) - 1) - namelen;
+			char *p = namebuf + namelen;
+			int rc = snprintf(p, remaining, "+%#lx/%#lx ",
+					  offset, size);
+			if (modname && rc < remaining)
+				snprintf(p + rc, remaining - rc,
+					 "[%s] ", modname);
+			namebuf[sizeof(namebuf)-1] = '\0';
+		}
+
+		pr_err("  frame %d: 0x%lx %s(sp 0x%lx)\n",
+		       i++, address, namebuf, (unsigned long)(kbt->it.sp));
+
+		if (i >= 100) {
+			pr_err("Stack dump truncated"
+			       " (%d frames)\n", i);
+			break;
+		}
+	}
+	if (headers)
+		pr_err("Stack dump complete\n");
+}
+EXPORT_SYMBOL(tile_show_stack);
+
+
+/* This is called from show_regs() and _dump_stack() */
+void dump_stack_regs(struct pt_regs *regs)
+{
+	struct KBacktraceIterator kbt;
+	KBacktraceIterator_init(&kbt, NULL, regs);
+	tile_show_stack(&kbt, 1);
+}
+EXPORT_SYMBOL(dump_stack_regs);
+
+static struct pt_regs *regs_to_pt_regs(struct pt_regs *regs,
+				       ulong pc, ulong lr, ulong sp, ulong r52)
+{
+	memset(regs, 0, sizeof(struct pt_regs));
+	regs->pc = pc;
+	regs->lr = lr;
+	regs->sp = sp;
+	regs->regs[52] = r52;
+	return regs;
+}
+
+/* This is called from dump_stack() and just converts to pt_regs */
+void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52)
+{
+	struct pt_regs regs;
+	dump_stack_regs(regs_to_pt_regs(&regs, pc, lr, sp, r52));
+}
+
+/* This is called from KBacktraceIterator_init_current() */
+void _KBacktraceIterator_init_current(struct KBacktraceIterator *kbt, ulong pc,
+				      ulong lr, ulong sp, ulong r52)
+{
+	struct pt_regs regs;
+	KBacktraceIterator_init(kbt, NULL,
+				regs_to_pt_regs(&regs, pc, lr, sp, r52));
+}
+
+/* This is called only from kernel/sched.c, with esp == NULL */
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+	struct KBacktraceIterator kbt;
+	if (task == NULL || task == current)
+		KBacktraceIterator_init_current(&kbt);
+	else
+		KBacktraceIterator_init(&kbt, task, NULL);
+	tile_show_stack(&kbt, 0);
+}
+
+#ifdef CONFIG_STACKTRACE
+
+/* Support generic Linux stack API too */
+
+void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace)
+{
+	struct KBacktraceIterator kbt;
+	int skip = trace->skip;
+	int i = 0;
+
+	if (task == NULL || task == current)
+		KBacktraceIterator_init_current(&kbt);
+	else
+		KBacktraceIterator_init(&kbt, task, NULL);
+	for (; !KBacktraceIterator_end(&kbt); KBacktraceIterator_next(&kbt)) {
+		if (skip) {
+			--skip;
+			continue;
+		}
+		if (i >= trace->max_entries || kbt.it.pc < PAGE_OFFSET)
+			break;
+		trace->entries[i++] = kbt.it.pc;
+	}
+	trace->nr_entries = i;
+}
+EXPORT_SYMBOL(save_stack_trace_tsk);
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	save_stack_trace_tsk(NULL, trace);
+}
+
+#endif
+
+/* In entry.S */
+EXPORT_SYMBOL(KBacktraceIterator_init_current);
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
new file mode 100644
index 00000000000..f0f87eab8c3
--- /dev/null
+++ b/arch/tile/kernel/sys.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/TILE
+ * platform.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/mempolicy.h>
+#include <linux/binfmts.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/uaccess.h>
+#include <linux/signal.h>
+#include <asm/syscalls.h>
+#include <asm/pgtable.h>
+#include <asm/homecache.h>
+#include <arch/chip.h>
+
+SYSCALL_DEFINE0(flush_cache)
+{
+	homecache_evict(cpumask_of(smp_processor_id()));
+	return 0;
+}
+
+/*
+ * Syscalls that pass 64-bit values on 32-bit systems normally
+ * pass them as (low,high) word packed into the immediately adjacent
+ * registers.  If the low word naturally falls on an even register,
+ * our ABI makes it work correctly; if not, we adjust it here.
+ * Handling it here means we don't have to fix uclibc AND glibc AND
+ * any other standard libcs we want to support.
+ */
+
+#if !defined(__tilegx__) || defined(CONFIG_COMPAT)
+
+ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count)
+{
+	return sys_readahead(fd, ((loff_t)offset_hi << 32) | offset_lo, count);
+}
+
+long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
+		     u32 len, int advice)
+{
+	return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo,
+				len, advice);
+}
+
+int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
+		       u32 len_lo, u32 len_hi, int advice)
+{
+	return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo,
+				((loff_t)len_hi << 32) | len_lo, advice);
+}
+
+#endif /* 32-bit syscall wrappers */
+
+/* Note: used by the compat code even in 64-bit Linux. */
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags,
+		unsigned long, fd, unsigned long, off_4k)
+{
+#define PAGE_ADJUST (PAGE_SHIFT - 12)
+	if (off_4k & ((1 << PAGE_ADJUST) - 1))
+		return -EINVAL;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      off_4k >> PAGE_ADJUST);
+}
+
+#ifdef __tilegx__
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags,
+		unsigned long, fd, off_t, offset)
+{
+	if (offset & ((1 << PAGE_SHIFT) - 1))
+		return -EINVAL;
+	return sys_mmap_pgoff(addr, len, prot, flags, fd,
+			      offset >> PAGE_SHIFT);
+}
+#endif
+
+
+/* Provide the actual syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+#ifndef __tilegx__
+/* See comments at the top of the file. */
+#define sys_fadvise64 sys32_fadvise64
+#define sys_fadvise64_64 sys32_fadvise64_64
+#define sys_readahead sys32_readahead
+#define sys_sync_file_range sys_sync_file_range2
+#endif
+
+/*
+ * Note that we can't include <linux/unistd.h> here since the header
+ * guard will defeat us; <asm/unistd.h> checks for __SYSCALL as well.
+ */
+void *sys_call_table[__NR_syscalls] = {
+	[0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/tile/kernel/tile-desc_32.c b/arch/tile/kernel/tile-desc_32.c
new file mode 100644
index 00000000000..69af0e150f7
--- /dev/null
+++ b/arch/tile/kernel/tile-desc_32.c
@@ -0,0 +1,2498 @@
+/* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */
+#define BFD_RELOC(x) -1
+
+/* Special registers. */
+#define TREG_LR 55
+#define TREG_SN 56
+#define TREG_ZERO 63
+
+/* FIXME: Rename this. */
+#include <asm/opcode-tile.h>
+
+#include <linux/stddef.h>
+
+const struct tile_opcode tile_opcodes[395] =
+{
+ { "bpt", TILE_OPC_BPT, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "info", TILE_OPC_INFO, 0xf, 1, TREG_ZERO, 1,
+    { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } },
+  },
+  { "infol", TILE_OPC_INFOL, 0x3, 1, TREG_ZERO, 1,
+    { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "j", TILE_OPC_J, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jal", TILE_OPC_JAL, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 6 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "move", TILE_OPC_MOVE, 0xf, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 9, 10 }, { 11, 12 }, { 13, 14 }, { 0, } },
+  },
+  { "move.sn", TILE_OPC_MOVE_SN, 0x3, 2, TREG_SN, 1,
+    { { 7, 8 }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "movei", TILE_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1,
+    { { 7, 0 }, { 9, 1 }, { 11, 2 }, { 13, 3 }, { 0, } },
+  },
+  { "movei.sn", TILE_OPC_MOVEI_SN, 0x3, 2, TREG_SN, 1,
+    { { 7, 0 }, { 9, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "moveli", TILE_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1,
+    { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "moveli.sn", TILE_OPC_MOVELI_SN, 0x3, 2, TREG_SN, 1,
+    { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "movelis", TILE_OPC_MOVELIS, 0x3, 2, TREG_SN, 1,
+    { { 7, 4 }, { 9, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "prefetch", TILE_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 15 } },
+  },
+  { "raise", TILE_OPC_RAISE, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "add", TILE_OPC_ADD, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "add.sn", TILE_OPC_ADD_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addb", TILE_OPC_ADDB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addb.sn", TILE_OPC_ADDB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addbs_u", TILE_OPC_ADDBS_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addbs_u.sn", TILE_OPC_ADDBS_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addh", TILE_OPC_ADDH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addh.sn", TILE_OPC_ADDH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addhs", TILE_OPC_ADDHS, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addhs.sn", TILE_OPC_ADDHS_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addi", TILE_OPC_ADDI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "addi.sn", TILE_OPC_ADDI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addib", TILE_OPC_ADDIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addib.sn", TILE_OPC_ADDIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addih", TILE_OPC_ADDIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addih.sn", TILE_OPC_ADDIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addli", TILE_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addli.sn", TILE_OPC_ADDLI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "addlis", TILE_OPC_ADDLIS, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adds", TILE_OPC_ADDS, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adds.sn", TILE_OPC_ADDS_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adiffb_u", TILE_OPC_ADIFFB_U, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adiffb_u.sn", TILE_OPC_ADIFFB_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adiffh", TILE_OPC_ADIFFH, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "adiffh.sn", TILE_OPC_ADIFFH_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "and", TILE_OPC_AND, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "and.sn", TILE_OPC_AND_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "andi", TILE_OPC_ANDI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "andi.sn", TILE_OPC_ANDI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "auli", TILE_OPC_AULI, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 4 }, { 9, 10, 5 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "avgb_u", TILE_OPC_AVGB_U, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "avgb_u.sn", TILE_OPC_AVGB_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "avgh", TILE_OPC_AVGH, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "avgh.sn", TILE_OPC_AVGH_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbns", TILE_OPC_BBNS, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbns.sn", TILE_OPC_BBNS_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbnst", TILE_OPC_BBNST, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbnst.sn", TILE_OPC_BBNST_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbs", TILE_OPC_BBS, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbs.sn", TILE_OPC_BBS_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbst", TILE_OPC_BBST, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bbst.sn", TILE_OPC_BBST_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgez", TILE_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgez.sn", TILE_OPC_BGEZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgezt", TILE_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgezt.sn", TILE_OPC_BGEZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgz", TILE_OPC_BGZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgz.sn", TILE_OPC_BGZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgzt", TILE_OPC_BGZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bgzt.sn", TILE_OPC_BGZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bitx", TILE_OPC_BITX, 0x5, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
+  },
+  { "bitx.sn", TILE_OPC_BITX_SN, 0x1, 2, TREG_SN, 1,
+    { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blez", TILE_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blez.sn", TILE_OPC_BLEZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blezt", TILE_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blezt.sn", TILE_OPC_BLEZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blz", TILE_OPC_BLZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blz.sn", TILE_OPC_BLZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blzt", TILE_OPC_BLZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "blzt.sn", TILE_OPC_BLZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bnz", TILE_OPC_BNZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bnz.sn", TILE_OPC_BNZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bnzt", TILE_OPC_BNZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bnzt.sn", TILE_OPC_BNZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bytex", TILE_OPC_BYTEX, 0x5, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
+  },
+  { "bytex.sn", TILE_OPC_BYTEX_SN, 0x1, 2, TREG_SN, 1,
+    { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bz", TILE_OPC_BZ, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bz.sn", TILE_OPC_BZ_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bzt", TILE_OPC_BZT, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "bzt.sn", TILE_OPC_BZT_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 10, 20 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "clz", TILE_OPC_CLZ, 0x5, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
+  },
+  { "clz.sn", TILE_OPC_CLZ_SN, 0x1, 2, TREG_SN, 1,
+    { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "crc32_32", TILE_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "crc32_32.sn", TILE_OPC_CRC32_32_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "crc32_8", TILE_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "crc32_8.sn", TILE_OPC_CRC32_8_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "ctz", TILE_OPC_CTZ, 0x5, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
+  },
+  { "ctz.sn", TILE_OPC_CTZ_SN, 0x1, 2, TREG_SN, 1,
+    { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "drain", TILE_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "dtlbpr", TILE_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "dword_align", TILE_OPC_DWORD_ALIGN, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "dword_align.sn", TILE_OPC_DWORD_ALIGN_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "finv", TILE_OPC_FINV, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "flush", TILE_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "fnop", TILE_OPC_FNOP, 0xf, 0, TREG_ZERO, 1,
+    { {  }, {  }, {  }, {  }, { 0, } },
+  },
+  { "icoh", TILE_OPC_ICOH, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "ill", TILE_OPC_ILL, 0xa, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, {  }, { 0, } },
+  },
+  { "inthb", TILE_OPC_INTHB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "inthb.sn", TILE_OPC_INTHB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "inthh", TILE_OPC_INTHH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "inthh.sn", TILE_OPC_INTHH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "intlb", TILE_OPC_INTLB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "intlb.sn", TILE_OPC_INTLB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "intlh", TILE_OPC_INTLH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "intlh.sn", TILE_OPC_INTLH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "inv", TILE_OPC_INV, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "iret", TILE_OPC_IRET, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jalb", TILE_OPC_JALB, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jalf", TILE_OPC_JALF, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jalr", TILE_OPC_JALR, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jalrp", TILE_OPC_JALRP, 0x2, 1, TREG_LR, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jb", TILE_OPC_JB, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jf", TILE_OPC_JF, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 22 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jr", TILE_OPC_JR, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "jrp", TILE_OPC_JRP, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lb", TILE_OPC_LB, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
+  },
+  { "lb.sn", TILE_OPC_LB_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lb_u", TILE_OPC_LB_U, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
+  },
+  { "lb_u.sn", TILE_OPC_LB_U_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lbadd", TILE_OPC_LBADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lbadd.sn", TILE_OPC_LBADD_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lbadd_u", TILE_OPC_LBADD_U, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lbadd_u.sn", TILE_OPC_LBADD_U_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lh", TILE_OPC_LH, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
+  },
+  { "lh.sn", TILE_OPC_LH_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lh_u", TILE_OPC_LH_U, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
+  },
+  { "lh_u.sn", TILE_OPC_LH_U_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lhadd", TILE_OPC_LHADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lhadd.sn", TILE_OPC_LHADD_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lhadd_u", TILE_OPC_LHADD_U, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lhadd_u.sn", TILE_OPC_LHADD_U_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lnk", TILE_OPC_LNK, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lnk.sn", TILE_OPC_LNK_SN, 0x2, 1, TREG_SN, 1,
+    { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lw", TILE_OPC_LW, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 23, 15 } },
+  },
+  { "lw.sn", TILE_OPC_LW_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lw_na", TILE_OPC_LW_NA, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lw_na.sn", TILE_OPC_LW_NA_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lwadd", TILE_OPC_LWADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lwadd.sn", TILE_OPC_LWADD_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lwadd_na", TILE_OPC_LWADD_NA, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "lwadd_na.sn", TILE_OPC_LWADD_NA_SN, 0x2, 3, TREG_SN, 1,
+    { { 0, }, { 9, 24, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxb_u", TILE_OPC_MAXB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxb_u.sn", TILE_OPC_MAXB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxh", TILE_OPC_MAXH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxh.sn", TILE_OPC_MAXH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxib_u", TILE_OPC_MAXIB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxib_u.sn", TILE_OPC_MAXIB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxih", TILE_OPC_MAXIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "maxih.sn", TILE_OPC_MAXIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mf", TILE_OPC_MF, 0x2, 0, TREG_ZERO, 1,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mfspr", TILE_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 25 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minb_u", TILE_OPC_MINB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minb_u.sn", TILE_OPC_MINB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minh", TILE_OPC_MINH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minh.sn", TILE_OPC_MINH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minib_u", TILE_OPC_MINIB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minib_u.sn", TILE_OPC_MINIB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minih", TILE_OPC_MINIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "minih.sn", TILE_OPC_MINIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mm", TILE_OPC_MM, 0x3, 5, TREG_ZERO, 1,
+    { { 7, 8, 16, 26, 27 }, { 9, 10, 17, 28, 29 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mnz", TILE_OPC_MNZ, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "mnz.sn", TILE_OPC_MNZ_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mnzb", TILE_OPC_MNZB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mnzb.sn", TILE_OPC_MNZB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mnzh", TILE_OPC_MNZH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mnzh.sn", TILE_OPC_MNZH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mtspr", TILE_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 30, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhh_ss", TILE_OPC_MULHH_SS, 0x5, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulhh_ss.sn", TILE_OPC_MULHH_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhh_su", TILE_OPC_MULHH_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhh_su.sn", TILE_OPC_MULHH_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhh_uu", TILE_OPC_MULHH_UU, 0x5, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulhh_uu.sn", TILE_OPC_MULHH_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhha_ss", TILE_OPC_MULHHA_SS, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulhha_ss.sn", TILE_OPC_MULHHA_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhha_su", TILE_OPC_MULHHA_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhha_su.sn", TILE_OPC_MULHHA_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhha_uu", TILE_OPC_MULHHA_UU, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulhha_uu.sn", TILE_OPC_MULHHA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhhsa_uu", TILE_OPC_MULHHSA_UU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhhsa_uu.sn", TILE_OPC_MULHHSA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_ss", TILE_OPC_MULHL_SS, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_ss.sn", TILE_OPC_MULHL_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_su", TILE_OPC_MULHL_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_su.sn", TILE_OPC_MULHL_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_us", TILE_OPC_MULHL_US, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_us.sn", TILE_OPC_MULHL_US_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_uu", TILE_OPC_MULHL_UU, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhl_uu.sn", TILE_OPC_MULHL_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_ss", TILE_OPC_MULHLA_SS, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_ss.sn", TILE_OPC_MULHLA_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_su", TILE_OPC_MULHLA_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_su.sn", TILE_OPC_MULHLA_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_us", TILE_OPC_MULHLA_US, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_us.sn", TILE_OPC_MULHLA_US_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_uu", TILE_OPC_MULHLA_UU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhla_uu.sn", TILE_OPC_MULHLA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulhlsa_uu", TILE_OPC_MULHLSA_UU, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulhlsa_uu.sn", TILE_OPC_MULHLSA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulll_ss", TILE_OPC_MULLL_SS, 0x5, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulll_ss.sn", TILE_OPC_MULLL_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulll_su", TILE_OPC_MULLL_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulll_su.sn", TILE_OPC_MULLL_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulll_uu", TILE_OPC_MULLL_UU, 0x5, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 11, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mulll_uu.sn", TILE_OPC_MULLL_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mullla_ss", TILE_OPC_MULLLA_SS, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mullla_ss.sn", TILE_OPC_MULLLA_SS_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mullla_su", TILE_OPC_MULLLA_SU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mullla_su.sn", TILE_OPC_MULLLA_SU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mullla_uu", TILE_OPC_MULLLA_UU, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mullla_uu.sn", TILE_OPC_MULLLA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulllsa_uu", TILE_OPC_MULLLSA_UU, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mulllsa_uu.sn", TILE_OPC_MULLLSA_UU_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mvnz", TILE_OPC_MVNZ, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mvnz.sn", TILE_OPC_MVNZ_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mvz", TILE_OPC_MVZ, 0x5, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 31, 12, 18 }, { 0, }, { 0, } },
+  },
+  { "mvz.sn", TILE_OPC_MVZ_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mz", TILE_OPC_MZ, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "mz.sn", TILE_OPC_MZ_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mzb", TILE_OPC_MZB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mzb.sn", TILE_OPC_MZB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mzh", TILE_OPC_MZH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "mzh.sn", TILE_OPC_MZH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "nap", TILE_OPC_NAP, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "nop", TILE_OPC_NOP, 0xf, 0, TREG_ZERO, 1,
+    { {  }, {  }, {  }, {  }, { 0, } },
+  },
+  { "nor", TILE_OPC_NOR, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "nor.sn", TILE_OPC_NOR_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "or", TILE_OPC_OR, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "or.sn", TILE_OPC_OR_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "ori", TILE_OPC_ORI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "ori.sn", TILE_OPC_ORI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packbs_u", TILE_OPC_PACKBS_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packbs_u.sn", TILE_OPC_PACKBS_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packhb", TILE_OPC_PACKHB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packhb.sn", TILE_OPC_PACKHB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packhs", TILE_OPC_PACKHS, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packhs.sn", TILE_OPC_PACKHS_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packlb", TILE_OPC_PACKLB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "packlb.sn", TILE_OPC_PACKLB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "pcnt", TILE_OPC_PCNT, 0x5, 2, TREG_ZERO, 1,
+    { { 7, 8 }, { 0, }, { 11, 12 }, { 0, }, { 0, } },
+  },
+  { "pcnt.sn", TILE_OPC_PCNT_SN, 0x1, 2, TREG_SN, 1,
+    { { 7, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "rl", TILE_OPC_RL, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "rl.sn", TILE_OPC_RL_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "rli", TILE_OPC_RLI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
+  },
+  { "rli.sn", TILE_OPC_RLI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "s1a", TILE_OPC_S1A, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "s1a.sn", TILE_OPC_S1A_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "s2a", TILE_OPC_S2A, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "s2a.sn", TILE_OPC_S2A_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "s3a", TILE_OPC_S3A, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "s3a.sn", TILE_OPC_S3A_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadab_u", TILE_OPC_SADAB_U, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadab_u.sn", TILE_OPC_SADAB_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadah", TILE_OPC_SADAH, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadah.sn", TILE_OPC_SADAH_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadah_u", TILE_OPC_SADAH_U, 0x1, 3, TREG_ZERO, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadah_u.sn", TILE_OPC_SADAH_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 21, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadb_u", TILE_OPC_SADB_U, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadb_u.sn", TILE_OPC_SADB_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadh", TILE_OPC_SADH, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadh.sn", TILE_OPC_SADH_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadh_u", TILE_OPC_SADH_U, 0x1, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sadh_u.sn", TILE_OPC_SADH_U_SN, 0x1, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sb", TILE_OPC_SB, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
+  },
+  { "sbadd", TILE_OPC_SBADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seq", TILE_OPC_SEQ, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "seq.sn", TILE_OPC_SEQ_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqb", TILE_OPC_SEQB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqb.sn", TILE_OPC_SEQB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqh", TILE_OPC_SEQH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqh.sn", TILE_OPC_SEQH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqi", TILE_OPC_SEQI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "seqi.sn", TILE_OPC_SEQI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqib", TILE_OPC_SEQIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqib.sn", TILE_OPC_SEQIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqih", TILE_OPC_SEQIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "seqih.sn", TILE_OPC_SEQIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sh", TILE_OPC_SH, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
+  },
+  { "shadd", TILE_OPC_SHADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shl", TILE_OPC_SHL, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "shl.sn", TILE_OPC_SHL_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlb", TILE_OPC_SHLB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlb.sn", TILE_OPC_SHLB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlh", TILE_OPC_SHLH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlh.sn", TILE_OPC_SHLH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shli", TILE_OPC_SHLI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
+  },
+  { "shli.sn", TILE_OPC_SHLI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlib", TILE_OPC_SHLIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlib.sn", TILE_OPC_SHLIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlih", TILE_OPC_SHLIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shlih.sn", TILE_OPC_SHLIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shr", TILE_OPC_SHR, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "shr.sn", TILE_OPC_SHR_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrb", TILE_OPC_SHRB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrb.sn", TILE_OPC_SHRB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrh", TILE_OPC_SHRH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrh.sn", TILE_OPC_SHRH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shri", TILE_OPC_SHRI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
+  },
+  { "shri.sn", TILE_OPC_SHRI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrib", TILE_OPC_SHRIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrib.sn", TILE_OPC_SHRIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrih", TILE_OPC_SHRIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "shrih.sn", TILE_OPC_SHRIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slt", TILE_OPC_SLT, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "slt.sn", TILE_OPC_SLT_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slt_u", TILE_OPC_SLT_U, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "slt_u.sn", TILE_OPC_SLT_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltb", TILE_OPC_SLTB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltb.sn", TILE_OPC_SLTB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltb_u", TILE_OPC_SLTB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltb_u.sn", TILE_OPC_SLTB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slte", TILE_OPC_SLTE, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "slte.sn", TILE_OPC_SLTE_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slte_u", TILE_OPC_SLTE_U, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "slte_u.sn", TILE_OPC_SLTE_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteb", TILE_OPC_SLTEB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteb.sn", TILE_OPC_SLTEB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteb_u", TILE_OPC_SLTEB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteb_u.sn", TILE_OPC_SLTEB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteh", TILE_OPC_SLTEH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteh.sn", TILE_OPC_SLTEH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteh_u", TILE_OPC_SLTEH_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slteh_u.sn", TILE_OPC_SLTEH_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slth", TILE_OPC_SLTH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slth.sn", TILE_OPC_SLTH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slth_u", TILE_OPC_SLTH_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slth_u.sn", TILE_OPC_SLTH_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slti", TILE_OPC_SLTI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "slti.sn", TILE_OPC_SLTI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "slti_u", TILE_OPC_SLTI_U, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 11, 12, 2 }, { 13, 14, 3 }, { 0, } },
+  },
+  { "slti_u.sn", TILE_OPC_SLTI_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltib", TILE_OPC_SLTIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltib.sn", TILE_OPC_SLTIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltib_u", TILE_OPC_SLTIB_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltib_u.sn", TILE_OPC_SLTIB_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltih", TILE_OPC_SLTIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltih.sn", TILE_OPC_SLTIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltih_u", TILE_OPC_SLTIH_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sltih_u.sn", TILE_OPC_SLTIH_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sne", TILE_OPC_SNE, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "sne.sn", TILE_OPC_SNE_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sneb", TILE_OPC_SNEB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sneb.sn", TILE_OPC_SNEB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sneh", TILE_OPC_SNEH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sneh.sn", TILE_OPC_SNEH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sra", TILE_OPC_SRA, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "sra.sn", TILE_OPC_SRA_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "srab", TILE_OPC_SRAB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "srab.sn", TILE_OPC_SRAB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "srah", TILE_OPC_SRAH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "srah.sn", TILE_OPC_SRAH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "srai", TILE_OPC_SRAI, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 11, 12, 34 }, { 13, 14, 35 }, { 0, } },
+  },
+  { "srai.sn", TILE_OPC_SRAI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sraib", TILE_OPC_SRAIB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sraib.sn", TILE_OPC_SRAIB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sraih", TILE_OPC_SRAIH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sraih.sn", TILE_OPC_SRAIH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 32 }, { 9, 10, 33 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sub", TILE_OPC_SUB, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "sub.sn", TILE_OPC_SUB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subb", TILE_OPC_SUBB, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subb.sn", TILE_OPC_SUBB_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subbs_u", TILE_OPC_SUBBS_U, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subbs_u.sn", TILE_OPC_SUBBS_U_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subh", TILE_OPC_SUBH, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subh.sn", TILE_OPC_SUBH_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subhs", TILE_OPC_SUBHS, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subhs.sn", TILE_OPC_SUBHS_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subs", TILE_OPC_SUBS, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "subs.sn", TILE_OPC_SUBS_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "sw", TILE_OPC_SW, 0x12, 2, TREG_ZERO, 1,
+    { { 0, }, { 10, 17 }, { 0, }, { 0, }, { 15, 36 } },
+  },
+  { "swadd", TILE_OPC_SWADD, 0x2, 3, TREG_ZERO, 1,
+    { { 0, }, { 24, 17, 37 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "swint0", TILE_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "swint1", TILE_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "swint2", TILE_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "swint3", TILE_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0,
+    { { 0, }, {  }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tblidxb0", TILE_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1,
+    { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
+  },
+  { "tblidxb0.sn", TILE_OPC_TBLIDXB0_SN, 0x1, 2, TREG_SN, 1,
+    { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tblidxb1", TILE_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1,
+    { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
+  },
+  { "tblidxb1.sn", TILE_OPC_TBLIDXB1_SN, 0x1, 2, TREG_SN, 1,
+    { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tblidxb2", TILE_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1,
+    { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
+  },
+  { "tblidxb2.sn", TILE_OPC_TBLIDXB2_SN, 0x1, 2, TREG_SN, 1,
+    { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tblidxb3", TILE_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1,
+    { { 21, 8 }, { 0, }, { 31, 12 }, { 0, }, { 0, } },
+  },
+  { "tblidxb3.sn", TILE_OPC_TBLIDXB3_SN, 0x1, 2, TREG_SN, 1,
+    { { 21, 8 }, { 0, }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tns", TILE_OPC_TNS, 0x2, 2, TREG_ZERO, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "tns.sn", TILE_OPC_TNS_SN, 0x2, 2, TREG_SN, 1,
+    { { 0, }, { 9, 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "wh64", TILE_OPC_WH64, 0x2, 1, TREG_ZERO, 1,
+    { { 0, }, { 10 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "xor", TILE_OPC_XOR, 0xf, 3, TREG_ZERO, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 11, 12, 18 }, { 13, 14, 19 }, { 0, } },
+  },
+  { "xor.sn", TILE_OPC_XOR_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 16 }, { 9, 10, 17 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "xori", TILE_OPC_XORI, 0x3, 3, TREG_ZERO, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { "xori.sn", TILE_OPC_XORI_SN, 0x3, 3, TREG_SN, 1,
+    { { 7, 8, 0 }, { 9, 10, 1 }, { 0, }, { 0, }, { 0, } },
+  },
+  { NULL, TILE_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } },
+  }
+};
+#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6))
+#define CHILD(array_index) (TILE_OPC_NONE + (array_index))
+
+static const unsigned short decode_X0_fsm[1153] =
+{
+  BITFIELD(22, 9) /* index 0 */,
+  CHILD(513), CHILD(530), CHILD(547), CHILD(564), CHILD(596), CHILD(613),
+  CHILD(630), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, CHILD(663), CHILD(680), CHILD(697), CHILD(714), CHILD(746),
+  CHILD(763), CHILD(780), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+  CHILD(813), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+  CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(873), CHILD(878), CHILD(883),
+  CHILD(903), CHILD(908), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(913),
+  CHILD(918), CHILD(923), CHILD(943), CHILD(948), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, CHILD(953), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(988), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(993),
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, CHILD(1076), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(18, 4) /* index 513 */,
+  TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD,
+  TILE_OPC_ADIFFB_U, TILE_OPC_ADIFFH, TILE_OPC_AND, TILE_OPC_AVGB_U,
+  TILE_OPC_AVGH, TILE_OPC_CRC32_32, TILE_OPC_CRC32_8, TILE_OPC_INTHB,
+  TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH, TILE_OPC_MAXB_U,
+  BITFIELD(18, 4) /* index 530 */,
+  TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH, TILE_OPC_MNZB, TILE_OPC_MNZH,
+  TILE_OPC_MNZ, TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_SU, TILE_OPC_MULHHA_UU,
+  TILE_OPC_MULHHSA_UU, TILE_OPC_MULHH_SS, TILE_OPC_MULHH_SU,
+  TILE_OPC_MULHH_UU, TILE_OPC_MULHLA_SS, TILE_OPC_MULHLA_SU,
+  TILE_OPC_MULHLA_US,
+  BITFIELD(18, 4) /* index 547 */,
+  TILE_OPC_MULHLA_UU, TILE_OPC_MULHLSA_UU, TILE_OPC_MULHL_SS,
+  TILE_OPC_MULHL_SU, TILE_OPC_MULHL_US, TILE_OPC_MULHL_UU, TILE_OPC_MULLLA_SS,
+  TILE_OPC_MULLLA_SU, TILE_OPC_MULLLA_UU, TILE_OPC_MULLLSA_UU,
+  TILE_OPC_MULLL_SS, TILE_OPC_MULLL_SU, TILE_OPC_MULLL_UU, TILE_OPC_MVNZ,
+  TILE_OPC_MVZ, TILE_OPC_MZB,
+  BITFIELD(18, 4) /* index 564 */,
+  TILE_OPC_MZH, TILE_OPC_MZ, TILE_OPC_NOR, CHILD(581), TILE_OPC_PACKHB,
+  TILE_OPC_PACKLB, TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
+  TILE_OPC_SADAB_U, TILE_OPC_SADAH, TILE_OPC_SADAH_U, TILE_OPC_SADB_U,
+  TILE_OPC_SADH, TILE_OPC_SADH_U,
+  BITFIELD(12, 2) /* index 581 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(586),
+  BITFIELD(14, 2) /* index 586 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(591),
+  BITFIELD(16, 2) /* index 591 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  BITFIELD(18, 4) /* index 596 */,
+  TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB, TILE_OPC_SHLH,
+  TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR, TILE_OPC_SLTB,
+  TILE_OPC_SLTB_U, TILE_OPC_SLTEB, TILE_OPC_SLTEB_U, TILE_OPC_SLTEH,
+  TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
+  BITFIELD(18, 4) /* index 613 */,
+  TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
+  TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
+  TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
+  TILE_OPC_XOR, TILE_OPC_DWORD_ALIGN,
+  BITFIELD(18, 3) /* index 630 */,
+  CHILD(639), CHILD(642), CHILD(645), CHILD(648), CHILD(651), CHILD(654),
+  CHILD(657), CHILD(660),
+  BITFIELD(21, 1) /* index 639 */,
+  TILE_OPC_ADDS, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 642 */,
+  TILE_OPC_SUBS, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 645 */,
+  TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 648 */,
+  TILE_OPC_ADDHS, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 651 */,
+  TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 654 */,
+  TILE_OPC_SUBHS, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 657 */,
+  TILE_OPC_PACKHS, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 660 */,
+  TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+  BITFIELD(18, 4) /* index 663 */,
+  TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
+  TILE_OPC_ADIFFB_U_SN, TILE_OPC_ADIFFH_SN, TILE_OPC_AND_SN,
+  TILE_OPC_AVGB_U_SN, TILE_OPC_AVGH_SN, TILE_OPC_CRC32_32_SN,
+  TILE_OPC_CRC32_8_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN,
+  TILE_OPC_INTLB_SN, TILE_OPC_INTLH_SN, TILE_OPC_MAXB_U_SN,
+  BITFIELD(18, 4) /* index 680 */,
+  TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN, TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN,
+  TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN, TILE_OPC_MULHHA_SS_SN,
+  TILE_OPC_MULHHA_SU_SN, TILE_OPC_MULHHA_UU_SN, TILE_OPC_MULHHSA_UU_SN,
+  TILE_OPC_MULHH_SS_SN, TILE_OPC_MULHH_SU_SN, TILE_OPC_MULHH_UU_SN,
+  TILE_OPC_MULHLA_SS_SN, TILE_OPC_MULHLA_SU_SN, TILE_OPC_MULHLA_US_SN,
+  BITFIELD(18, 4) /* index 697 */,
+  TILE_OPC_MULHLA_UU_SN, TILE_OPC_MULHLSA_UU_SN, TILE_OPC_MULHL_SS_SN,
+  TILE_OPC_MULHL_SU_SN, TILE_OPC_MULHL_US_SN, TILE_OPC_MULHL_UU_SN,
+  TILE_OPC_MULLLA_SS_SN, TILE_OPC_MULLLA_SU_SN, TILE_OPC_MULLLA_UU_SN,
+  TILE_OPC_MULLLSA_UU_SN, TILE_OPC_MULLL_SS_SN, TILE_OPC_MULLL_SU_SN,
+  TILE_OPC_MULLL_UU_SN, TILE_OPC_MVNZ_SN, TILE_OPC_MVZ_SN, TILE_OPC_MZB_SN,
+  BITFIELD(18, 4) /* index 714 */,
+  TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN, CHILD(731),
+  TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN, TILE_OPC_S1A_SN,
+  TILE_OPC_S2A_SN, TILE_OPC_S3A_SN, TILE_OPC_SADAB_U_SN, TILE_OPC_SADAH_SN,
+  TILE_OPC_SADAH_U_SN, TILE_OPC_SADB_U_SN, TILE_OPC_SADH_SN,
+  TILE_OPC_SADH_U_SN,
+  BITFIELD(12, 2) /* index 731 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(736),
+  BITFIELD(14, 2) /* index 736 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(741),
+  BITFIELD(16, 2) /* index 741 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+  BITFIELD(18, 4) /* index 746 */,
+  TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN, TILE_OPC_SHLB_SN,
+  TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN, TILE_OPC_SHRH_SN,
+  TILE_OPC_SHR_SN, TILE_OPC_SLTB_SN, TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN,
+  TILE_OPC_SLTEB_U_SN, TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN,
+  TILE_OPC_SLTE_SN,
+  BITFIELD(18, 4) /* index 763 */,
+  TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
+  TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
+  TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
+  TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN, TILE_OPC_XOR_SN, TILE_OPC_DWORD_ALIGN_SN,
+  BITFIELD(18, 3) /* index 780 */,
+  CHILD(789), CHILD(792), CHILD(795), CHILD(798), CHILD(801), CHILD(804),
+  CHILD(807), CHILD(810),
+  BITFIELD(21, 1) /* index 789 */,
+  TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 792 */,
+  TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 795 */,
+  TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 798 */,
+  TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 801 */,
+  TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 804 */,
+  TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 807 */,
+  TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+  BITFIELD(21, 1) /* index 810 */,
+  TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(6, 2) /* index 813 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(818),
+  BITFIELD(8, 2) /* index 818 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(823),
+  BITFIELD(10, 2) /* index 823 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+  BITFIELD(6, 2) /* index 828 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(833),
+  BITFIELD(8, 2) /* index 833 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(838),
+  BITFIELD(10, 2) /* index 838 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+  BITFIELD(0, 2) /* index 843 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(848),
+  BITFIELD(2, 2) /* index 848 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(853),
+  BITFIELD(4, 2) /* index 853 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(858),
+  BITFIELD(6, 2) /* index 858 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(863),
+  BITFIELD(8, 2) /* index 863 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(868),
+  BITFIELD(10, 2) /* index 868 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+  BITFIELD(20, 2) /* index 873 */,
+  TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI,
+  BITFIELD(20, 2) /* index 878 */,
+  TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MINIB_U, TILE_OPC_MINIH,
+  BITFIELD(20, 2) /* index 883 */,
+  CHILD(888), TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI,
+  BITFIELD(6, 2) /* index 888 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(893),
+  BITFIELD(8, 2) /* index 893 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(898),
+  BITFIELD(10, 2) /* index 898 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  BITFIELD(20, 2) /* index 903 */,
+  TILE_OPC_SLTIB, TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U,
+  BITFIELD(20, 2) /* index 908 */,
+  TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(20, 2) /* index 913 */,
+  TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
+  BITFIELD(20, 2) /* index 918 */,
+  TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MINIB_U_SN,
+  TILE_OPC_MINIH_SN,
+  BITFIELD(20, 2) /* index 923 */,
+  CHILD(928), TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN,
+  BITFIELD(6, 2) /* index 928 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(933),
+  BITFIELD(8, 2) /* index 933 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(938),
+  BITFIELD(10, 2) /* index 938 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+  BITFIELD(20, 2) /* index 943 */,
+  TILE_OPC_SLTIB_SN, TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN,
+  TILE_OPC_SLTIH_U_SN,
+  BITFIELD(20, 2) /* index 948 */,
+  TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(20, 2) /* index 953 */,
+  TILE_OPC_NONE, CHILD(958), TILE_OPC_XORI, TILE_OPC_NONE,
+  BITFIELD(0, 2) /* index 958 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(963),
+  BITFIELD(2, 2) /* index 963 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(968),
+  BITFIELD(4, 2) /* index 968 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(973),
+  BITFIELD(6, 2) /* index 973 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(978),
+  BITFIELD(8, 2) /* index 978 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(983),
+  BITFIELD(10, 2) /* index 983 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  BITFIELD(20, 2) /* index 988 */,
+  TILE_OPC_NONE, TILE_OPC_ANDI_SN, TILE_OPC_XORI_SN, TILE_OPC_NONE,
+  BITFIELD(17, 5) /* index 993 */,
+  TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLIB, TILE_OPC_SHLIH, TILE_OPC_SHLI,
+  TILE_OPC_SHRIB, TILE_OPC_SHRIH, TILE_OPC_SHRI, TILE_OPC_SRAIB,
+  TILE_OPC_SRAIH, TILE_OPC_SRAI, CHILD(1026), TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(12, 4) /* index 1026 */,
+  TILE_OPC_NONE, CHILD(1043), CHILD(1046), CHILD(1049), CHILD(1052),
+  CHILD(1055), CHILD(1058), CHILD(1061), CHILD(1064), CHILD(1067),
+  CHILD(1070), CHILD(1073), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1043 */,
+  TILE_OPC_BITX, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1046 */,
+  TILE_OPC_BYTEX, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1049 */,
+  TILE_OPC_CLZ, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1052 */,
+  TILE_OPC_CTZ, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1055 */,
+  TILE_OPC_FNOP, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1058 */,
+  TILE_OPC_NOP, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1061 */,
+  TILE_OPC_PCNT, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1064 */,
+  TILE_OPC_TBLIDXB0, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1067 */,
+  TILE_OPC_TBLIDXB1, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1070 */,
+  TILE_OPC_TBLIDXB2, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1073 */,
+  TILE_OPC_TBLIDXB3, TILE_OPC_NONE,
+  BITFIELD(17, 5) /* index 1076 */,
+  TILE_OPC_NONE, TILE_OPC_RLI_SN, TILE_OPC_SHLIB_SN, TILE_OPC_SHLIH_SN,
+  TILE_OPC_SHLI_SN, TILE_OPC_SHRIB_SN, TILE_OPC_SHRIH_SN, TILE_OPC_SHRI_SN,
+  TILE_OPC_SRAIB_SN, TILE_OPC_SRAIH_SN, TILE_OPC_SRAI_SN, CHILD(1109),
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(12, 4) /* index 1109 */,
+  TILE_OPC_NONE, CHILD(1126), CHILD(1129), CHILD(1132), CHILD(1135),
+  CHILD(1055), CHILD(1058), CHILD(1138), CHILD(1141), CHILD(1144),
+  CHILD(1147), CHILD(1150), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1126 */,
+  TILE_OPC_BITX_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1129 */,
+  TILE_OPC_BYTEX_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1132 */,
+  TILE_OPC_CLZ_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1135 */,
+  TILE_OPC_CTZ_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1138 */,
+  TILE_OPC_PCNT_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1141 */,
+  TILE_OPC_TBLIDXB0_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1144 */,
+  TILE_OPC_TBLIDXB1_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1147 */,
+  TILE_OPC_TBLIDXB2_SN, TILE_OPC_NONE,
+  BITFIELD(16, 1) /* index 1150 */,
+  TILE_OPC_TBLIDXB3_SN, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_X1_fsm[1540] =
+{
+  BITFIELD(54, 9) /* index 0 */,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, CHILD(513), CHILD(561), CHILD(594),
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(641), CHILD(689),
+  CHILD(722), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(766),
+  CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+  CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+  CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+  CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+  CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+  CHILD(766), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+  CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+  CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+  CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+  CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+  CHILD(781), CHILD(781), CHILD(781), CHILD(796), CHILD(796), CHILD(796),
+  CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+  CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+  CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+  CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+  CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(826),
+  CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826),
+  CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826),
+  CHILD(826), CHILD(826), CHILD(826), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+  CHILD(843), CHILD(860), CHILD(899), CHILD(923), CHILD(932), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, CHILD(941), CHILD(950), CHILD(974), CHILD(983),
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+  TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(992),
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  CHILD(1334), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+  TILE_OPC_J, TILE_OPC_J, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+  TILE_OPC_JAL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(49, 5) /* index 513 */,
+  TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD, TILE_OPC_AND,
+  TILE_OPC_INTHB, TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH,
+  TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR, TILE_OPC_LNK,
+  TILE_OPC_MAXB_U, TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH,
+  TILE_OPC_MNZB, TILE_OPC_MNZH, TILE_OPC_MNZ, TILE_OPC_MZB, TILE_OPC_MZH,
+  TILE_OPC_MZ, TILE_OPC_NOR, CHILD(546), TILE_OPC_PACKHB, TILE_OPC_PACKLB,
+  TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
+  BITFIELD(43, 2) /* index 546 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(551),
+  BITFIELD(45, 2) /* index 551 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(556),
+  BITFIELD(47, 2) /* index 556 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  BITFIELD(49, 5) /* index 561 */,
+  TILE_OPC_SB, TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB,
+  TILE_OPC_SHLH, TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR,
+  TILE_OPC_SH, TILE_OPC_SLTB, TILE_OPC_SLTB_U, TILE_OPC_SLTEB,
+  TILE_OPC_SLTEB_U, TILE_OPC_SLTEH, TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
+  TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
+  TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
+  TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
+  BITFIELD(49, 4) /* index 594 */,
+  CHILD(611), CHILD(614), CHILD(617), CHILD(620), CHILD(623), CHILD(626),
+  CHILD(629), CHILD(632), CHILD(635), CHILD(638), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 611 */,
+  TILE_OPC_SW, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 614 */,
+  TILE_OPC_XOR, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 617 */,
+  TILE_OPC_ADDS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 620 */,
+  TILE_OPC_SUBS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 623 */,
+  TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 626 */,
+  TILE_OPC_ADDHS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 629 */,
+  TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 632 */,
+  TILE_OPC_SUBHS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 635 */,
+  TILE_OPC_PACKHS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 638 */,
+  TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+  BITFIELD(49, 5) /* index 641 */,
+  TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
+  TILE_OPC_AND_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN, TILE_OPC_INTLB_SN,
+  TILE_OPC_INTLH_SN, TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR,
+  TILE_OPC_LNK_SN, TILE_OPC_MAXB_U_SN, TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN,
+  TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN, TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN,
+  TILE_OPC_MZB_SN, TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN,
+  CHILD(674), TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN,
+  TILE_OPC_S1A_SN, TILE_OPC_S2A_SN, TILE_OPC_S3A_SN,
+  BITFIELD(43, 2) /* index 674 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(679),
+  BITFIELD(45, 2) /* index 679 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(684),
+  BITFIELD(47, 2) /* index 684 */,
+  TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+  BITFIELD(49, 5) /* index 689 */,
+  TILE_OPC_SB, TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN,
+  TILE_OPC_SHLB_SN, TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN,
+  TILE_OPC_SHRH_SN, TILE_OPC_SHR_SN, TILE_OPC_SH, TILE_OPC_SLTB_SN,
+  TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN, TILE_OPC_SLTEB_U_SN,
+  TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN, TILE_OPC_SLTE_SN,
+  TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
+  TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
+  TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
+  TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN,
+  BITFIELD(49, 4) /* index 722 */,
+  CHILD(611), CHILD(739), CHILD(742), CHILD(745), CHILD(748), CHILD(751),
+  CHILD(754), CHILD(757), CHILD(760), CHILD(763), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 739 */,
+  TILE_OPC_XOR_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 742 */,
+  TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 745 */,
+  TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 748 */,
+  TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 751 */,
+  TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 754 */,
+  TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 757 */,
+  TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 760 */,
+  TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 763 */,
+  TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+  BITFIELD(37, 2) /* index 766 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(771),
+  BITFIELD(39, 2) /* index 771 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(776),
+  BITFIELD(41, 2) /* index 776 */,
+  TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+  BITFIELD(37, 2) /* index 781 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(786),
+  BITFIELD(39, 2) /* index 786 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(791),
+  BITFIELD(41, 2) /* index 791 */,
+  TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+  BITFIELD(31, 2) /* index 796 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(801),
+  BITFIELD(33, 2) /* index 801 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(806),
+  BITFIELD(35, 2) /* index 806 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(811),
+  BITFIELD(37, 2) /* index 811 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(816),
+  BITFIELD(39, 2) /* index 816 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(821),
+  BITFIELD(41, 2) /* index 821 */,
+  TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+  BITFIELD(31, 4) /* index 826 */,
+  TILE_OPC_BZ, TILE_OPC_BZT, TILE_OPC_BNZ, TILE_OPC_BNZT, TILE_OPC_BGZ,
+  TILE_OPC_BGZT, TILE_OPC_BGEZ, TILE_OPC_BGEZT, TILE_OPC_BLZ, TILE_OPC_BLZT,
+  TILE_OPC_BLEZ, TILE_OPC_BLEZT, TILE_OPC_BBS, TILE_OPC_BBST, TILE_OPC_BBNS,
+  TILE_OPC_BBNST,
+  BITFIELD(31, 4) /* index 843 */,
+  TILE_OPC_BZ_SN, TILE_OPC_BZT_SN, TILE_OPC_BNZ_SN, TILE_OPC_BNZT_SN,
+  TILE_OPC_BGZ_SN, TILE_OPC_BGZT_SN, TILE_OPC_BGEZ_SN, TILE_OPC_BGEZT_SN,
+  TILE_OPC_BLZ_SN, TILE_OPC_BLZT_SN, TILE_OPC_BLEZ_SN, TILE_OPC_BLEZT_SN,
+  TILE_OPC_BBS_SN, TILE_OPC_BBST_SN, TILE_OPC_BBNS_SN, TILE_OPC_BBNST_SN,
+  BITFIELD(51, 3) /* index 860 */,
+  TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI, CHILD(869),
+  TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MFSPR,
+  BITFIELD(31, 2) /* index 869 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(874),
+  BITFIELD(33, 2) /* index 874 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(879),
+  BITFIELD(35, 2) /* index 879 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(884),
+  BITFIELD(37, 2) /* index 884 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(889),
+  BITFIELD(39, 2) /* index 889 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(894),
+  BITFIELD(41, 2) /* index 894 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  BITFIELD(51, 3) /* index 899 */,
+  TILE_OPC_MINIB_U, TILE_OPC_MINIH, TILE_OPC_MTSPR, CHILD(908),
+  TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI, TILE_OPC_SLTIB,
+  BITFIELD(37, 2) /* index 908 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(913),
+  BITFIELD(39, 2) /* index 913 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(918),
+  BITFIELD(41, 2) /* index 918 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  BITFIELD(51, 3) /* index 923 */,
+  TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U, TILE_OPC_SLTI,
+  TILE_OPC_SLTI_U, TILE_OPC_XORI, TILE_OPC_LBADD, TILE_OPC_LBADD_U,
+  BITFIELD(51, 3) /* index 932 */,
+  TILE_OPC_LHADD, TILE_OPC_LHADD_U, TILE_OPC_LWADD, TILE_OPC_LWADD_NA,
+  TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD, TILE_OPC_NONE,
+  BITFIELD(51, 3) /* index 941 */,
+  TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
+  TILE_OPC_ANDI_SN, TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MFSPR,
+  BITFIELD(51, 3) /* index 950 */,
+  TILE_OPC_MINIB_U_SN, TILE_OPC_MINIH_SN, TILE_OPC_MTSPR, CHILD(959),
+  TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN, TILE_OPC_SLTIB_SN,
+  BITFIELD(37, 2) /* index 959 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(964),
+  BITFIELD(39, 2) /* index 964 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(969),
+  BITFIELD(41, 2) /* index 969 */,
+  TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+  BITFIELD(51, 3) /* index 974 */,
+  TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN, TILE_OPC_SLTIH_U_SN,
+  TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_XORI_SN, TILE_OPC_LBADD_SN,
+  TILE_OPC_LBADD_U_SN,
+  BITFIELD(51, 3) /* index 983 */,
+  TILE_OPC_LHADD_SN, TILE_OPC_LHADD_U_SN, TILE_OPC_LWADD_SN,
+  TILE_OPC_LWADD_NA_SN, TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD,
+  TILE_OPC_NONE,
+  BITFIELD(46, 7) /* index 992 */,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1121),
+  CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1124), CHILD(1124),
+  CHILD(1124), CHILD(1124), CHILD(1127), CHILD(1127), CHILD(1127),
+  CHILD(1127), CHILD(1130), CHILD(1130), CHILD(1130), CHILD(1130),
+  CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1136),
+  CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1139), CHILD(1139),
+  CHILD(1139), CHILD(1139), CHILD(1142), CHILD(1142), CHILD(1142),
+  CHILD(1142), CHILD(1145), CHILD(1145), CHILD(1145), CHILD(1145),
+  CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1151),
+  CHILD(1242), CHILD(1290), CHILD(1323), TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1121 */,
+  TILE_OPC_RLI, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1124 */,
+  TILE_OPC_SHLIB, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1127 */,
+  TILE_OPC_SHLIH, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1130 */,
+  TILE_OPC_SHLI, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1133 */,
+  TILE_OPC_SHRIB, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1136 */,
+  TILE_OPC_SHRIH, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1139 */,
+  TILE_OPC_SHRI, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1142 */,
+  TILE_OPC_SRAIB, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1145 */,
+  TILE_OPC_SRAIH, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1148 */,
+  TILE_OPC_SRAI, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 1151 */,
+  TILE_OPC_NONE, CHILD(1160), CHILD(1163), CHILD(1166), CHILD(1169),
+  CHILD(1172), CHILD(1175), CHILD(1178),
+  BITFIELD(53, 1) /* index 1160 */,
+  TILE_OPC_DRAIN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1163 */,
+  TILE_OPC_DTLBPR, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1166 */,
+  TILE_OPC_FINV, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1169 */,
+  TILE_OPC_FLUSH, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1172 */,
+  TILE_OPC_FNOP, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1175 */,
+  TILE_OPC_ICOH, TILE_OPC_NONE,
+  BITFIELD(31, 2) /* index 1178 */,
+  CHILD(1183), CHILD(1211), CHILD(1239), CHILD(1239),
+  BITFIELD(53, 1) /* index 1183 */,
+  CHILD(1186), TILE_OPC_NONE,
+  BITFIELD(33, 2) /* index 1186 */,
+  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL, CHILD(1191),
+  BITFIELD(35, 2) /* index 1191 */,
+  TILE_OPC_ILL, CHILD(1196), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(37, 2) /* index 1196 */,
+  TILE_OPC_ILL, CHILD(1201), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(39, 2) /* index 1201 */,
+  TILE_OPC_ILL, CHILD(1206), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(41, 2) /* index 1206 */,
+  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_BPT, TILE_OPC_ILL,
+  BITFIELD(53, 1) /* index 1211 */,
+  CHILD(1214), TILE_OPC_NONE,
+  BITFIELD(33, 2) /* index 1214 */,
+  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL, CHILD(1219),
+  BITFIELD(35, 2) /* index 1219 */,
+  TILE_OPC_ILL, CHILD(1224), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(37, 2) /* index 1224 */,
+  TILE_OPC_ILL, CHILD(1229), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(39, 2) /* index 1229 */,
+  TILE_OPC_ILL, CHILD(1234), TILE_OPC_ILL, TILE_OPC_ILL,
+  BITFIELD(41, 2) /* index 1234 */,
+  TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_RAISE, TILE_OPC_ILL,
+  BITFIELD(53, 1) /* index 1239 */,
+  TILE_OPC_ILL, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 1242 */,
+  CHILD(1251), CHILD(1254), CHILD(1257), CHILD(1275), CHILD(1278),
+  CHILD(1281), CHILD(1284), CHILD(1287),
+  BITFIELD(53, 1) /* index 1251 */,
+  TILE_OPC_INV, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1254 */,
+  TILE_OPC_IRET, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1257 */,
+  CHILD(1260), TILE_OPC_NONE,
+  BITFIELD(31, 2) /* index 1260 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1265),
+  BITFIELD(33, 2) /* index 1265 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1270),
+  BITFIELD(35, 2) /* index 1270 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+  BITFIELD(53, 1) /* index 1275 */,
+  TILE_OPC_LB_U, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1278 */,
+  TILE_OPC_LH, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1281 */,
+  TILE_OPC_LH_U, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1284 */,
+  TILE_OPC_LW, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1287 */,
+  TILE_OPC_MF, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 1290 */,
+  CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311),
+  CHILD(1314), CHILD(1317), CHILD(1320),
+  BITFIELD(53, 1) /* index 1299 */,
+  TILE_OPC_NAP, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1302 */,
+  TILE_OPC_NOP, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1305 */,
+  TILE_OPC_SWINT0, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1308 */,
+  TILE_OPC_SWINT1, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1311 */,
+  TILE_OPC_SWINT2, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1314 */,
+  TILE_OPC_SWINT3, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1317 */,
+  TILE_OPC_TNS, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1320 */,
+  TILE_OPC_WH64, TILE_OPC_NONE,
+  BITFIELD(43, 2) /* index 1323 */,
+  CHILD(1328), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(45, 1) /* index 1328 */,
+  CHILD(1331), TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1331 */,
+  TILE_OPC_LW_NA, TILE_OPC_NONE,
+  BITFIELD(46, 7) /* index 1334 */,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1463),
+  CHILD(1463), CHILD(1463), CHILD(1463), CHILD(1466), CHILD(1466),
+  CHILD(1466), CHILD(1466), CHILD(1469), CHILD(1469), CHILD(1469),
+  CHILD(1469), CHILD(1472), CHILD(1472), CHILD(1472), CHILD(1472),
+  CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1475), CHILD(1478),
+  CHILD(1478), CHILD(1478), CHILD(1478), CHILD(1481), CHILD(1481),
+  CHILD(1481), CHILD(1481), CHILD(1484), CHILD(1484), CHILD(1484),
+  CHILD(1484), CHILD(1487), CHILD(1487), CHILD(1487), CHILD(1487),
+  CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1490), CHILD(1151),
+  CHILD(1493), CHILD(1517), CHILD(1529), TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1463 */,
+  TILE_OPC_RLI_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1466 */,
+  TILE_OPC_SHLIB_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1469 */,
+  TILE_OPC_SHLIH_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1472 */,
+  TILE_OPC_SHLI_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1475 */,
+  TILE_OPC_SHRIB_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1478 */,
+  TILE_OPC_SHRIH_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1481 */,
+  TILE_OPC_SHRI_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1484 */,
+  TILE_OPC_SRAIB_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1487 */,
+  TILE_OPC_SRAIH_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1490 */,
+  TILE_OPC_SRAI_SN, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 1493 */,
+  CHILD(1251), CHILD(1254), CHILD(1502), CHILD(1505), CHILD(1508),
+  CHILD(1511), CHILD(1514), CHILD(1287),
+  BITFIELD(53, 1) /* index 1502 */,
+  TILE_OPC_LB_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1505 */,
+  TILE_OPC_LB_U_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1508 */,
+  TILE_OPC_LH_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1511 */,
+  TILE_OPC_LH_U_SN, TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1514 */,
+  TILE_OPC_LW_SN, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 1517 */,
+  CHILD(1299), CHILD(1302), CHILD(1305), CHILD(1308), CHILD(1311),
+  CHILD(1314), CHILD(1526), CHILD(1320),
+  BITFIELD(53, 1) /* index 1526 */,
+  TILE_OPC_TNS_SN, TILE_OPC_NONE,
+  BITFIELD(43, 2) /* index 1529 */,
+  CHILD(1534), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(45, 1) /* index 1534 */,
+  CHILD(1537), TILE_OPC_NONE,
+  BITFIELD(53, 1) /* index 1537 */,
+  TILE_OPC_LW_NA_SN, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y0_fsm[168] =
+{
+  BITFIELD(27, 4) /* index 0 */,
+  TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+  CHILD(57), CHILD(62), CHILD(67), TILE_OPC_ADDI, CHILD(72), CHILD(102),
+  TILE_OPC_SEQI, CHILD(117), TILE_OPC_SLTI, TILE_OPC_SLTI_U,
+  BITFIELD(18, 2) /* index 17 */,
+  TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+  BITFIELD(18, 2) /* index 22 */,
+  TILE_OPC_MNZ, TILE_OPC_MVNZ, TILE_OPC_MVZ, TILE_OPC_MZ,
+  BITFIELD(18, 2) /* index 27 */,
+  TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+  BITFIELD(12, 2) /* index 32 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+  BITFIELD(14, 2) /* index 37 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+  BITFIELD(16, 2) /* index 42 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  BITFIELD(18, 2) /* index 47 */,
+  TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+  BITFIELD(18, 2) /* index 52 */,
+  TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+  BITFIELD(18, 2) /* index 57 */,
+  TILE_OPC_MULHLSA_UU, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+  BITFIELD(18, 2) /* index 62 */,
+  TILE_OPC_MULHH_SS, TILE_OPC_MULHH_UU, TILE_OPC_MULLL_SS, TILE_OPC_MULLL_UU,
+  BITFIELD(18, 2) /* index 67 */,
+  TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_UU, TILE_OPC_MULLLA_SS,
+  TILE_OPC_MULLLA_UU,
+  BITFIELD(0, 2) /* index 72 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+  BITFIELD(2, 2) /* index 77 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+  BITFIELD(4, 2) /* index 82 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+  BITFIELD(6, 2) /* index 87 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(92),
+  BITFIELD(8, 2) /* index 92 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(97),
+  BITFIELD(10, 2) /* index 97 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  BITFIELD(6, 2) /* index 102 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(107),
+  BITFIELD(8, 2) /* index 107 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(112),
+  BITFIELD(10, 2) /* index 112 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  BITFIELD(15, 5) /* index 117 */,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_RLI,
+  TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHLI,
+  TILE_OPC_SHLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SHRI, TILE_OPC_SHRI,
+  TILE_OPC_SHRI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI,
+  CHILD(150), CHILD(159), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(12, 3) /* index 150 */,
+  TILE_OPC_NONE, TILE_OPC_BITX, TILE_OPC_BYTEX, TILE_OPC_CLZ, TILE_OPC_CTZ,
+  TILE_OPC_FNOP, TILE_OPC_NOP, TILE_OPC_PCNT,
+  BITFIELD(12, 3) /* index 159 */,
+  TILE_OPC_TBLIDXB0, TILE_OPC_TBLIDXB1, TILE_OPC_TBLIDXB2, TILE_OPC_TBLIDXB3,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y1_fsm[140] =
+{
+  BITFIELD(59, 4) /* index 0 */,
+  TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+  CHILD(57), TILE_OPC_ADDI, CHILD(62), CHILD(92), TILE_OPC_SEQI, CHILD(107),
+  TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(49, 2) /* index 17 */,
+  TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+  BITFIELD(49, 2) /* index 22 */,
+  TILE_OPC_NONE, TILE_OPC_MNZ, TILE_OPC_MZ, TILE_OPC_NONE,
+  BITFIELD(49, 2) /* index 27 */,
+  TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+  BITFIELD(43, 2) /* index 32 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+  BITFIELD(45, 2) /* index 37 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+  BITFIELD(47, 2) /* index 42 */,
+  TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+  BITFIELD(49, 2) /* index 47 */,
+  TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+  BITFIELD(49, 2) /* index 52 */,
+  TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+  BITFIELD(49, 2) /* index 57 */,
+  TILE_OPC_NONE, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+  BITFIELD(31, 2) /* index 62 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(67),
+  BITFIELD(33, 2) /* index 67 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(72),
+  BITFIELD(35, 2) /* index 72 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+  BITFIELD(37, 2) /* index 77 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+  BITFIELD(39, 2) /* index 82 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+  BITFIELD(41, 2) /* index 87 */,
+  TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+  BITFIELD(37, 2) /* index 92 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(97),
+  BITFIELD(39, 2) /* index 97 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(102),
+  BITFIELD(41, 2) /* index 102 */,
+  TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+  BITFIELD(48, 3) /* index 107 */,
+  TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SRAI,
+  CHILD(116), TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(43, 3) /* index 116 */,
+  TILE_OPC_NONE, CHILD(125), CHILD(130), CHILD(135), TILE_OPC_NONE,
+  TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(46, 2) /* index 125 */,
+  TILE_OPC_FNOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(46, 2) /* index 130 */,
+  TILE_OPC_ILL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+  BITFIELD(46, 2) /* index 135 */,
+  TILE_OPC_NOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y2_fsm[24] =
+{
+  BITFIELD(56, 3) /* index 0 */,
+  CHILD(9), TILE_OPC_LB_U, TILE_OPC_LH, TILE_OPC_LH_U, TILE_OPC_LW,
+  TILE_OPC_SB, TILE_OPC_SH, TILE_OPC_SW,
+  BITFIELD(20, 2) /* index 9 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(14),
+  BITFIELD(22, 2) /* index 14 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(19),
+  BITFIELD(24, 2) /* index 19 */,
+  TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+};
+
+#undef BITFIELD
+#undef CHILD
+const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS] =
+{
+  decode_X0_fsm,
+  decode_X1_fsm,
+  decode_Y0_fsm,
+  decode_Y1_fsm,
+  decode_Y2_fsm
+};
+const struct tile_operand tile_operands[43] =
+{
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_X0),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_X0, get_Imm8_X0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_X1),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_X1, get_Imm8_X1
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_Y0),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_Y0, get_Imm8_Y0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM8_Y1),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_Y1, get_Imm8_Y1
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM16_X0),
+    16, 1, 0, 0, 0, 0,
+    create_Imm16_X0, get_Imm16_X0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_IMM16_X1),
+    16, 1, 0, 0, 0, 0,
+    create_Imm16_X1, get_Imm16_X1
+  },
+  {
+    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_JOFFLONG_X1),
+    29, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    create_JOffLong_X1, get_JOffLong_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_X0, get_Dest_X0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_X0, get_SrcA_X0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_X1, get_Dest_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_X1, get_SrcA_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_Y0, get_Dest_Y0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y0, get_SrcA_Y0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_Dest_Y1, get_Dest_Y1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y1, get_SrcA_Y1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcA_Y2, get_SrcA_Y2
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_X0, get_SrcB_X0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_X1, get_SrcB_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_Y0, get_SrcB_Y0
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcB_Y1, get_SrcB_Y1
+  },
+  {
+    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_BROFF_X1),
+    17, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    create_BrOff_X1, get_BrOff_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_Dest_X0, get_Dest_X0
+  },
+  {
+    TILE_OP_TYPE_ADDRESS, BFD_RELOC(NONE),
+    28, 1, 0, 0, 1, TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES,
+    create_JOff_X1, get_JOff_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 0, 1, 0, 0,
+    create_SrcBDest_Y2, get_SrcBDest_Y2
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_SrcA_X1, get_SrcA_X1
+  },
+  {
+    TILE_OP_TYPE_SPR, BFD_RELOC(TILE_MF_IMM15_X1),
+    15, 0, 0, 0, 0, 0,
+    create_MF_Imm15_X1, get_MF_Imm15_X1
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMSTART_X0),
+    5, 0, 0, 0, 0, 0,
+    create_MMStart_X0, get_MMStart_X0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMEND_X0),
+    5, 0, 0, 0, 0, 0,
+    create_MMEnd_X0, get_MMEnd_X0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMSTART_X1),
+    5, 0, 0, 0, 0, 0,
+    create_MMStart_X1, get_MMStart_X1
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_MMEND_X1),
+    5, 0, 0, 0, 0, 0,
+    create_MMEnd_X1, get_MMEnd_X1
+  },
+  {
+    TILE_OP_TYPE_SPR, BFD_RELOC(TILE_MT_IMM15_X1),
+    15, 0, 0, 0, 0, 0,
+    create_MT_Imm15_X1, get_MT_Imm15_X1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 1, 0, 0,
+    create_Dest_Y0, get_Dest_Y0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_X0),
+    5, 0, 0, 0, 0, 0,
+    create_ShAmt_X0, get_ShAmt_X0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_X1),
+    5, 0, 0, 0, 0, 0,
+    create_ShAmt_X1, get_ShAmt_X1
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_Y0),
+    5, 0, 0, 0, 0, 0,
+    create_ShAmt_Y0, get_ShAmt_Y0
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SHAMT_Y1),
+    5, 0, 0, 0, 0, 0,
+    create_ShAmt_Y1, get_ShAmt_Y1
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    6, 0, 1, 0, 0, 0,
+    create_SrcBDest_Y2, get_SrcBDest_Y2
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE),
+    8, 1, 0, 0, 0, 0,
+    create_Dest_Imm8_X1, get_Dest_Imm8_X1
+  },
+  {
+    TILE_OP_TYPE_ADDRESS, BFD_RELOC(TILE_SN_BROFF),
+    10, 1, 0, 0, 1, TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES,
+    create_BrOff_SN, get_BrOff_SN
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SN_UIMM8),
+    8, 0, 0, 0, 0, 0,
+    create_Imm8_SN, get_Imm8_SN
+  },
+  {
+    TILE_OP_TYPE_IMMEDIATE, BFD_RELOC(TILE_SN_IMM8),
+    8, 1, 0, 0, 0, 0,
+    create_Imm8_SN, get_Imm8_SN
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    2, 0, 0, 1, 0, 0,
+    create_Dest_SN, get_Dest_SN
+  },
+  {
+    TILE_OP_TYPE_REGISTER, BFD_RELOC(NONE),
+    2, 0, 1, 0, 0, 0,
+    create_Src_SN, get_Src_SN
+  }
+};
+
+
+
+
+/* Given a set of bundle bits and the lookup FSM for a specific pipe,
+ * returns which instruction the bundle contains in that pipe.
+ */
+static const struct tile_opcode *
+find_opcode(tile_bundle_bits bits, const unsigned short *table)
+{
+  int index = 0;
+
+  while (1)
+  {
+    unsigned short bitspec = table[index];
+    unsigned int bitfield =
+      ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6);
+
+    unsigned short next = table[index + 1 + bitfield];
+    if (next <= TILE_OPC_NONE)
+      return &tile_opcodes[next];
+
+    index = next - TILE_OPC_NONE;
+  }
+}
+
+
+int
+parse_insn_tile(tile_bundle_bits bits,
+                unsigned int pc,
+                struct tile_decoded_instruction
+                decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE])
+{
+  int num_instructions = 0;
+  int pipe;
+
+  int min_pipe, max_pipe;
+  if ((bits & TILE_BUNDLE_Y_ENCODING_MASK) == 0)
+  {
+    min_pipe = TILE_PIPELINE_X0;
+    max_pipe = TILE_PIPELINE_X1;
+  }
+  else
+  {
+    min_pipe = TILE_PIPELINE_Y0;
+    max_pipe = TILE_PIPELINE_Y2;
+  }
+
+  /* For each pipe, find an instruction that fits. */
+  for (pipe = min_pipe; pipe <= max_pipe; pipe++)
+  {
+    const struct tile_opcode *opc;
+    struct tile_decoded_instruction *d;
+    int i;
+
+    d = &decoded[num_instructions++];
+    opc = find_opcode (bits, tile_bundle_decoder_fsms[pipe]);
+    d->opcode = opc;
+
+    /* Decode each operand, sign extending, etc. as appropriate. */
+    for (i = 0; i < opc->num_operands; i++)
+    {
+      const struct tile_operand *op =
+        &tile_operands[opc->operands[pipe][i]];
+      int opval = op->extract (bits);
+      if (op->is_signed)
+      {
+        /* Sign-extend the operand. */
+        int shift = (int)((sizeof(int) * 8) - op->num_bits);
+        opval = (opval << shift) >> shift;
+      }
+
+      /* Adjust PC-relative scaled branch offsets. */
+      if (op->type == TILE_OP_TYPE_ADDRESS)
+      {
+        opval *= TILE_BUNDLE_SIZE_IN_BYTES;
+        opval += (int)pc;
+      }
+
+      /* Record the final value. */
+      d->operands[i] = op;
+      d->operand_values[i] = opval;
+    }
+  }
+
+  return num_instructions;
+}
diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c
new file mode 100644
index 00000000000..b9ab25a889b
--- /dev/null
+++ b/arch/tile/kernel/time.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Support the cycle counter clocksource and tile timer clock event device.
+ */
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/hardirq.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <asm/irq_regs.h>
+#include <asm/traps.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+
+/*
+ * Define the cycle counter clock source.
+ */
+
+/* How many cycles per second we are running at. */
+static cycles_t cycles_per_sec __write_once;
+
+/*
+ * We set up shift and multiply values with a minsec of five seconds,
+ * since our timer counter counts down 31 bits at a frequency of
+ * no less than 500 MHz.  See @minsec for clocks_calc_mult_shift().
+ * We could use a different value for the 64-bit free-running
+ * cycle counter, but we use the same one for consistency, and since
+ * we will be reasonably precise with this value anyway.
+ */
+#define TILE_MINSEC 5
+
+cycles_t get_clock_rate(void)
+{
+	return cycles_per_sec;
+}
+
+#if CHIP_HAS_SPLIT_CYCLE()
+cycles_t get_cycles(void)
+{
+	unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH);
+	unsigned int low = __insn_mfspr(SPR_CYCLE_LOW);
+	unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+
+	while (unlikely(high != high2)) {
+		low = __insn_mfspr(SPR_CYCLE_LOW);
+		high = high2;
+		high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+	}
+
+	return (((cycles_t)high) << 32) | low;
+}
+#endif
+
+static cycles_t clocksource_get_cycles(struct clocksource *cs)
+{
+	return get_cycles();
+}
+
+static struct clocksource cycle_counter_cs = {
+	.name = "cycle counter",
+	.rating = 300,
+	.read = clocksource_get_cycles,
+	.mask = CLOCKSOURCE_MASK(64),
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Called very early from setup_arch() to set cycles_per_sec.
+ * We initialize it early so we can use it to set up loops_per_jiffy.
+ */
+void __init setup_clock(void)
+{
+	cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED);
+	clocksource_calc_mult_shift(&cycle_counter_cs, cycles_per_sec,
+				    TILE_MINSEC);
+}
+
+void __init calibrate_delay(void)
+{
+	loops_per_jiffy = get_clock_rate() / HZ;
+	pr_info("Clock rate yields %lu.%02lu BogoMIPS (lpj=%lu)\n",
+		loops_per_jiffy/(500000/HZ),
+		(loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
+}
+
+/* Called fairly late in init/main.c, but before we go smp. */
+void __init time_init(void)
+{
+	/* Initialize and register the clock source. */
+	clocksource_register(&cycle_counter_cs);
+
+	/* Start up the tile-timer interrupt source on the boot cpu. */
+	setup_tile_timer();
+}
+
+
+/*
+ * Define the tile timer clock event device.  The timer is driven by
+ * the TILE_TIMER_CONTROL register, which consists of a 31-bit down
+ * counter, plus bit 31, which signifies that the counter has wrapped
+ * from zero to (2**31) - 1.  The INT_TILE_TIMER interrupt will be
+ * raised as long as bit 31 is set.
+ */
+
+#define MAX_TICK 0x7fffffff   /* we have 31 bits of countdown timer */
+
+static int tile_timer_set_next_event(unsigned long ticks,
+				     struct clock_event_device *evt)
+{
+	BUG_ON(ticks > MAX_TICK);
+	__insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks);
+	raw_local_irq_unmask_now(INT_TILE_TIMER);
+	return 0;
+}
+
+/*
+ * Whenever anyone tries to change modes, we just mask interrupts
+ * and wait for the next event to get set.
+ */
+static void tile_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	raw_local_irq_mask_now(INT_TILE_TIMER);
+}
+
+/*
+ * Set min_delta_ns to 1 microsecond, since it takes about
+ * that long to fire the interrupt.
+ */
+static DEFINE_PER_CPU(struct clock_event_device, tile_timer) = {
+	.name = "tile timer",
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.min_delta_ns = 1000,
+	.rating = 100,
+	.irq = -1,
+	.set_next_event = tile_timer_set_next_event,
+	.set_mode = tile_timer_set_mode,
+};
+
+void __cpuinit setup_tile_timer(void)
+{
+	struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+
+	/* Fill in fields that are speed-specific. */
+	clockevents_calc_mult_shift(evt, cycles_per_sec, TILE_MINSEC);
+	evt->max_delta_ns = clockevent_delta2ns(MAX_TICK, evt);
+
+	/* Mark as being for this cpu only. */
+	evt->cpumask = cpumask_of(smp_processor_id());
+
+	/* Start out with timer not firing. */
+	raw_local_irq_mask_now(INT_TILE_TIMER);
+
+	/* Register tile timer. */
+	clockevents_register_device(evt);
+}
+
+/* Called from the interrupt vector. */
+void do_timer_interrupt(struct pt_regs *regs, int fault_num)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+	struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+
+	/*
+	 * Mask the timer interrupt here, since we are a oneshot timer
+	 * and there are now by definition no events pending.
+	 */
+	raw_local_irq_mask(INT_TILE_TIMER);
+
+	/* Track time spent here in an interrupt context */
+	irq_enter();
+
+	/* Track interrupt count. */
+	__get_cpu_var(irq_stat).irq_timer_count++;
+
+	/* Call the generic timer handler */
+	evt->event_handler(evt);
+
+	/*
+	 * Track time spent against the current process again and
+	 * process any softirqs if they are waiting.
+	 */
+	irq_exit();
+
+	set_irq_regs(old_regs);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * Note that with LOCKDEP, this is called during lockdep_init(), and
+ * we will claim that sched_clock() is zero for a little while, until
+ * we run setup_clock(), above.
+ */
+unsigned long long sched_clock(void)
+{
+	return clocksource_cyc2ns(get_cycles(),
+				  cycle_counter_cs.mult,
+				  cycle_counter_cs.shift);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+	return -EINVAL;
+}
diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c
new file mode 100644
index 00000000000..2dffc1044d8
--- /dev/null
+++ b/arch/tile/kernel/tlb.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+#include <hv/hypervisor.h>
+
+/* From tlbflush.h */
+DEFINE_PER_CPU(int, current_asid);
+int min_asid, max_asid;
+
+/*
+ * Note that we flush the L1I (for VM_EXEC pages) as well as the TLB
+ * so that when we are unmapping an executable page, we also flush it.
+ * Combined with flushing the L1I at context switch time, this means
+ * we don't have to do any other icache flushes.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	HV_Remote_ASID asids[NR_CPUS];
+	int i = 0, cpu;
+	for_each_cpu(cpu, &mm->cpu_vm_mask) {
+		HV_Remote_ASID *asid = &asids[i++];
+		asid->y = cpu / smp_topology.width;
+		asid->x = cpu % smp_topology.width;
+		asid->asid = per_cpu(current_asid, cpu);
+	}
+	flush_remote(0, HV_FLUSH_EVICT_L1I, &mm->cpu_vm_mask,
+		     0, 0, 0, NULL, asids, i);
+}
+
+void flush_tlb_current_task(void)
+{
+	flush_tlb_mm(current->mm);
+}
+
+void flush_tlb_page_mm(const struct vm_area_struct *vma, struct mm_struct *mm,
+		       unsigned long va)
+{
+	unsigned long size = hv_page_size(vma);
+	int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
+	flush_remote(0, cache, &mm->cpu_vm_mask,
+		     va, size, size, &mm->cpu_vm_mask, NULL, 0);
+}
+
+void flush_tlb_page(const struct vm_area_struct *vma, unsigned long va)
+{
+	flush_tlb_page_mm(vma, vma->vm_mm, va);
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+void flush_tlb_range(const struct vm_area_struct *vma,
+		     unsigned long start, unsigned long end)
+{
+	unsigned long size = hv_page_size(vma);
+	struct mm_struct *mm = vma->vm_mm;
+	int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
+	flush_remote(0, cache, &mm->cpu_vm_mask, start, end - start, size,
+		     &mm->cpu_vm_mask, NULL, 0);
+}
+
+void flush_tlb_all(void)
+{
+	int i;
+	for (i = 0; ; ++i) {
+		HV_VirtAddrRange r = hv_inquire_virtual(i);
+		if (r.size == 0)
+			break;
+		flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask,
+			     r.start, r.size, PAGE_SIZE, cpu_online_mask,
+			     NULL, 0);
+		flush_remote(0, 0, NULL,
+			     r.start, r.size, HPAGE_SIZE, cpu_online_mask,
+			     NULL, 0);
+	}
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask,
+		     start, end - start, PAGE_SIZE, cpu_online_mask, NULL, 0);
+}
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
new file mode 100644
index 00000000000..3870abbeeaa
--- /dev/null
+++ b/arch/tile/kernel/traps.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <asm/opcode-tile.h>
+#include <asm/opcode_constants.h>
+#include <asm/stack.h>
+#include <asm/traps.h>
+
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+void __init trap_init(void)
+{
+	/* Nothing needed here since we link code at .intrpt1 */
+}
+
+int unaligned_fixup = 1;
+
+static int __init setup_unaligned_fixup(char *str)
+{
+	/*
+	 * Say "=-1" to completely disable it.  If you just do "=0", we
+	 * will still parse the instruction, then fire a SIGBUS with
+	 * the correct address from inside the single_step code.
+	 */
+	long val;
+	if (strict_strtol(str, 0, &val) != 0)
+		return 0;
+	unaligned_fixup = val;
+	pr_info("Fixups for unaligned data accesses are %s\n",
+	       unaligned_fixup >= 0 ?
+	       (unaligned_fixup ? "enabled" : "disabled") :
+	       "completely disabled");
+	return 1;
+}
+__setup("unaligned_fixup=", setup_unaligned_fixup);
+
+#if CHIP_HAS_TILE_DMA()
+
+static int dma_disabled;
+
+static int __init nodma(char *str)
+{
+	pr_info("User-space DMA is disabled\n");
+	dma_disabled = 1;
+	return 1;
+}
+__setup("nodma", nodma);
+
+/* How to decode SPR_GPV_REASON */
+#define IRET_ERROR (1U << 31)
+#define MT_ERROR   (1U << 30)
+#define MF_ERROR   (1U << 29)
+#define SPR_INDEX  ((1U << 15) - 1)
+#define SPR_MPL_SHIFT  9  /* starting bit position for MPL encoded in SPR */
+
+/*
+ * See if this GPV is just to notify the kernel of SPR use and we can
+ * retry the user instruction after adjusting some MPLs suitably.
+ */
+static int retry_gpv(unsigned int gpv_reason)
+{
+	int mpl;
+
+	if (gpv_reason & IRET_ERROR)
+		return 0;
+
+	BUG_ON((gpv_reason & (MT_ERROR|MF_ERROR)) == 0);
+	mpl = (gpv_reason & SPR_INDEX) >> SPR_MPL_SHIFT;
+	if (mpl == INT_DMA_NOTIFY && !dma_disabled) {
+		/* User is turning on DMA. Allow it and retry. */
+		printk(KERN_DEBUG "Process %d/%s is now enabled for DMA\n",
+		       current->pid, current->comm);
+		BUG_ON(current->thread.tile_dma_state.enabled);
+		current->thread.tile_dma_state.enabled = 1;
+		grant_dma_mpls();
+		return 1;
+	}
+
+	return 0;
+}
+
+#endif /* CHIP_HAS_TILE_DMA() */
+
+#ifdef __tilegx__
+#define bundle_bits tilegx_bundle_bits
+#else
+#define bundle_bits tile_bundle_bits
+#endif
+
+extern bundle_bits bpt_code;
+
+asm(".pushsection .rodata.bpt_code,\"a\";"
+    ".align 8;"
+    "bpt_code: bpt;"
+    ".size bpt_code,.-bpt_code;"
+    ".popsection");
+
+static int special_ill(bundle_bits bundle, int *sigp, int *codep)
+{
+	int sig, code, maxcode;
+
+	if (bundle == bpt_code) {
+		*sigp = SIGTRAP;
+		*codep = TRAP_BRKPT;
+		return 1;
+	}
+
+	/* If it's a "raise" bundle, then "ill" must be in pipe X1. */
+#ifdef __tilegx__
+	if ((bundle & TILEGX_BUNDLE_MODE_MASK) != 0)
+		return 0;
+	if (get_Opcode_X1(bundle) != UNARY_OPCODE_X1)
+		return 0;
+	if (get_UnaryOpcodeExtension_X1(bundle) != ILL_UNARY_OPCODE_X1)
+		return 0;
+#else
+	if (bundle & TILE_BUNDLE_Y_ENCODING_MASK)
+		return 0;
+	if (get_Opcode_X1(bundle) != SHUN_0_OPCODE_X1)
+		return 0;
+	if (get_UnShOpcodeExtension_X1(bundle) != UN_0_SHUN_0_OPCODE_X1)
+		return 0;
+	if (get_UnOpcodeExtension_X1(bundle) != ILL_UN_0_SHUN_0_OPCODE_X1)
+		return 0;
+#endif
+
+	/* Check that the magic distinguishers are set to mean "raise". */
+	if (get_Dest_X1(bundle) != 29 || get_SrcA_X1(bundle) != 37)
+		return 0;
+
+	/* There must be an "addli zero, zero, VAL" in X0. */
+	if (get_Opcode_X0(bundle) != ADDLI_OPCODE_X0)
+		return 0;
+	if (get_Dest_X0(bundle) != TREG_ZERO)
+		return 0;
+	if (get_SrcA_X0(bundle) != TREG_ZERO)
+		return 0;
+
+	/*
+	 * Validate the proposed signal number and si_code value.
+	 * Note that we embed these in the static instruction itself
+	 * so that we perturb the register state as little as possible
+	 * at the time of the actual fault; it's unlikely you'd ever
+	 * need to dynamically choose which kind of fault to raise
+	 * from user space.
+	 */
+	sig = get_Imm16_X0(bundle) & 0x3f;
+	switch (sig) {
+	case SIGILL:
+		maxcode = NSIGILL;
+		break;
+	case SIGFPE:
+		maxcode = NSIGFPE;
+		break;
+	case SIGSEGV:
+		maxcode = NSIGSEGV;
+		break;
+	case SIGBUS:
+		maxcode = NSIGBUS;
+		break;
+	case SIGTRAP:
+		maxcode = NSIGTRAP;
+		break;
+	default:
+		return 0;
+	}
+	code = (get_Imm16_X0(bundle) >> 6) & 0xf;
+	if (code <= 0 || code > maxcode)
+		return 0;
+
+	/* Make it the requested signal. */
+	*sigp = sig;
+	*codep = code | __SI_FAULT;
+	return 1;
+}
+
+void __kprobes do_trap(struct pt_regs *regs, int fault_num,
+		       unsigned long reason)
+{
+	siginfo_t info = { 0 };
+	int signo, code;
+	unsigned long address;
+	bundle_bits instr;
+
+	/* Re-enable interrupts. */
+	local_irq_enable();
+
+	/*
+	 * If it hits in kernel mode and we can't fix it up, just exit the
+	 * current process and hope for the best.
+	 */
+	if (!user_mode(regs)) {
+		if (fixup_exception(regs))  /* only UNALIGN_DATA in practice */
+			return;
+		pr_alert("Kernel took bad trap %d at PC %#lx\n",
+		       fault_num, regs->pc);
+		if (fault_num == INT_GPV)
+			pr_alert("GPV_REASON is %#lx\n", reason);
+		show_regs(regs);
+		do_exit(SIGKILL);  /* FIXME: implement i386 die() */
+		return;
+	}
+
+	switch (fault_num) {
+	case INT_ILL:
+		if (copy_from_user(&instr, (void __user *)regs->pc,
+				   sizeof(instr))) {
+			pr_err("Unreadable instruction for INT_ILL:"
+			       " %#lx\n", regs->pc);
+			do_exit(SIGKILL);
+			return;
+		}
+		if (!special_ill(instr, &signo, &code)) {
+			signo = SIGILL;
+			code = ILL_ILLOPC;
+		}
+		address = regs->pc;
+		break;
+	case INT_GPV:
+#if CHIP_HAS_TILE_DMA()
+		if (retry_gpv(reason))
+			return;
+#endif
+		/*FALLTHROUGH*/
+	case INT_UDN_ACCESS:
+	case INT_IDN_ACCESS:
+#if CHIP_HAS_SN()
+	case INT_SN_ACCESS:
+#endif
+		signo = SIGILL;
+		code = ILL_PRVREG;
+		address = regs->pc;
+		break;
+	case INT_SWINT_3:
+	case INT_SWINT_2:
+	case INT_SWINT_0:
+		signo = SIGILL;
+		code = ILL_ILLTRP;
+		address = regs->pc;
+		break;
+	case INT_UNALIGN_DATA:
+#ifndef __tilegx__  /* FIXME: GX: no single-step yet */
+		if (unaligned_fixup >= 0) {
+			struct single_step_state *state =
+				current_thread_info()->step_state;
+			if (!state ||
+			    (void __user *)(regs->pc) != state->buffer) {
+				single_step_once(regs);
+				return;
+			}
+		}
+#endif
+		signo = SIGBUS;
+		code = BUS_ADRALN;
+		address = 0;
+		break;
+	case INT_DOUBLE_FAULT:
+		/*
+		 * For double fault, "reason" is actually passed as
+		 * SYSTEM_SAVE_1_2, the hypervisor's double-fault info, so
+		 * we can provide the original fault number rather than
+		 * the uninteresting "INT_DOUBLE_FAULT" so the user can
+		 * learn what actually struck while PL0 ICS was set.
+		 */
+		fault_num = reason;
+		signo = SIGILL;
+		code = ILL_DBLFLT;
+		address = regs->pc;
+		break;
+#ifdef __tilegx__
+	case INT_ILL_TRANS:
+		signo = SIGSEGV;
+		code = SEGV_MAPERR;
+		if (reason & SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK)
+			address = regs->pc;
+		else
+			address = 0;  /* FIXME: GX: single-step for address */
+		break;
+#endif
+	default:
+		panic("Unexpected do_trap interrupt number %d", fault_num);
+		return;
+	}
+
+	info.si_signo = signo;
+	info.si_code = code;
+	info.si_addr = (void __user *)address;
+	if (signo == SIGILL)
+		info.si_trapno = fault_num;
+	force_sig_info(signo, &info, current);
+}
+
+void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52)
+{
+	_dump_stack(dummy, pc, lr, sp, r52);
+	pr_emerg("Double fault: exiting\n");
+	machine_halt();
+}
diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S
new file mode 100644
index 00000000000..25fdc0c1839
--- /dev/null
+++ b/arch/tile/kernel/vmlinux.lds.S
@@ -0,0 +1,98 @@
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <hv/hypervisor.h>
+
+/* Text loads starting from the supervisor interrupt vector address. */
+#define TEXT_OFFSET MEM_SV_INTRPT
+
+OUTPUT_ARCH(tile)
+ENTRY(_start)
+jiffies = jiffies_64;
+
+PHDRS
+{
+  intrpt1 PT_LOAD ;
+  text PT_LOAD ;
+  data PT_LOAD ;
+}
+SECTIONS
+{
+  /* Text is loaded with a different VA than data; start with text. */
+  #undef LOAD_OFFSET
+  #define LOAD_OFFSET TEXT_OFFSET
+
+  /* Interrupt vectors */
+  .intrpt1 (LOAD_OFFSET) : AT ( 0 )   /* put at the start of physical memory */
+  {
+    _text = .;
+    _stext = .;
+    *(.intrpt1)
+  } :intrpt1 =0
+
+  /* Hypervisor call vectors */
+  #include "hvglue.lds"
+
+  /* Now the real code */
+  . = ALIGN(0x20000);
+  .text : AT (ADDR(.text) - LOAD_OFFSET) {
+    HEAD_TEXT
+    SCHED_TEXT
+    LOCK_TEXT
+    __fix_text_end = .;   /* tile-cpack won't rearrange before this */
+    TEXT_TEXT
+    *(.text.*)
+    *(.coldtext*)
+    *(.fixup)
+    *(.gnu.warning)
+  } :text =0
+  _etext = .;
+
+  /* "Init" is divided into two areas with very different virtual addresses. */
+  INIT_TEXT_SECTION(PAGE_SIZE)
+
+  /* Now we skip back to PAGE_OFFSET for the data. */
+  . = (. - TEXT_OFFSET + PAGE_OFFSET);
+  #undef LOAD_OFFSET
+  #define LOAD_OFFSET PAGE_OFFSET
+
+  . = ALIGN(PAGE_SIZE);
+  VMLINUX_SYMBOL(_sinitdata) = .;
+  .init.page : AT (ADDR(.init.page) - LOAD_OFFSET) {
+    *(.init.page)
+  } :data =0
+  INIT_DATA_SECTION(16)
+  PERCPU(PAGE_SIZE)
+  . = ALIGN(PAGE_SIZE);
+  VMLINUX_SYMBOL(_einitdata) = .;
+
+  _sdata = .;                   /* Start of data section */
+
+  RO_DATA_SECTION(PAGE_SIZE)
+
+  /* initially writeable, then read-only */
+  . = ALIGN(PAGE_SIZE);
+  __w1data_begin = .;
+  .w1data : AT(ADDR(.w1data) - LOAD_OFFSET) {
+    VMLINUX_SYMBOL(__w1data_begin) = .;
+    *(.w1data)
+    VMLINUX_SYMBOL(__w1data_end) = .;
+  }
+
+  RW_DATA_SECTION(L2_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+  _edata = .;
+
+  EXCEPTION_TABLE(L2_CACHE_BYTES)
+  NOTES
+
+
+  BSS_SECTION(8, PAGE_SIZE, 1)
+  _end = . ;
+
+  STABS_DEBUG
+  DWARF_DEBUG
+
+  DISCARDS
+}
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
new file mode 100644
index 00000000000..438af38bc9e
--- /dev/null
+++ b/arch/tile/lib/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for TILE-specific library files..
+#
+
+lib-y = cacheflush.o checksum.o cpumask.o delay.o \
+	mb_incoherent.o uaccess.o \
+	memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
+	strchr_$(BITS).o strlen_$(BITS).o
+
+ifneq ($(CONFIG_TILEGX),y)
+lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o
+endif
+
+lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o
+
+obj-$(CONFIG_MODULES) += exports.o
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
new file mode 100644
index 00000000000..8040b42a8ee
--- /dev/null
+++ b/arch/tile/lib/atomic_32.c
@@ -0,0 +1,330 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/cache.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/futex.h>
+#include <arch/chip.h>
+
+/* See <asm/atomic_32.h> */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+/*
+ * A block of memory containing locks for atomic ops. Each instance of this
+ * struct will be homed on a different CPU.
+ */
+struct atomic_locks_on_cpu {
+	int lock[ATOMIC_HASH_L2_SIZE];
+} __attribute__((aligned(ATOMIC_HASH_L2_SIZE * 4)));
+
+static DEFINE_PER_CPU(struct atomic_locks_on_cpu, atomic_lock_pool);
+
+/* The locks we'll use until __init_atomic_per_cpu is called. */
+static struct atomic_locks_on_cpu __initdata initial_atomic_locks;
+
+/* Hash into this vector to get a pointer to lock for the given atomic. */
+struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE]
+	__write_once = {
+	[0 ... ATOMIC_HASH_L1_SIZE-1] (&initial_atomic_locks)
+};
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/* This page is remapped on startup to be hash-for-home. */
+int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */]
+  __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned")));
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+static inline int *__atomic_hashed_lock(volatile void *v)
+{
+	/* NOTE: this code must match "sys_cmpxchg" in kernel/intvec.S */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	unsigned long i =
+		(unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long));
+	unsigned long n = __insn_crc32_32(0, i);
+
+	/* Grab high bits for L1 index. */
+	unsigned long l1_index = n >> ((sizeof(n) * 8) - ATOMIC_HASH_L1_SHIFT);
+	/* Grab low bits for L2 index. */
+	unsigned long l2_index = n & (ATOMIC_HASH_L2_SIZE - 1);
+
+	return &atomic_lock_ptr[l1_index]->lock[l2_index];
+#else
+	/*
+	 * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index.
+	 * Using mm works here because atomic_locks is page aligned.
+	 */
+	unsigned long ptr = __insn_mm((unsigned long)v >> 1,
+				      (unsigned long)atomic_locks,
+				      2, (ATOMIC_HASH_SHIFT + 2) - 1);
+	return (int *)ptr;
+#endif
+}
+
+#ifdef CONFIG_SMP
+/* Return whether the passed pointer is a valid atomic lock pointer. */
+static int is_atomic_lock(int *p)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	int i;
+	for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+
+		if (p >= &atomic_lock_ptr[i]->lock[0] &&
+		    p < &atomic_lock_ptr[i]->lock[ATOMIC_HASH_L2_SIZE]) {
+			return 1;
+		}
+	}
+	return 0;
+#else
+	return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE];
+#endif
+}
+
+void __atomic_fault_unlock(int *irqlock_word)
+{
+	BUG_ON(!is_atomic_lock(irqlock_word));
+	BUG_ON(*irqlock_word != 1);
+	*irqlock_word = 0;
+}
+
+#endif /* CONFIG_SMP */
+
+static inline int *__atomic_setup(volatile void *v)
+{
+	/* Issue a load to the target to bring it into cache. */
+	*(volatile int *)v;
+	return __atomic_hashed_lock(v);
+}
+
+int _atomic_xchg(atomic_t *v, int n)
+{
+	return __atomic_xchg(&v->counter, __atomic_setup(v), n).val;
+}
+EXPORT_SYMBOL(_atomic_xchg);
+
+int _atomic_xchg_add(atomic_t *v, int i)
+{
+	return __atomic_xchg_add(&v->counter, __atomic_setup(v), i).val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add);
+
+int _atomic_xchg_add_unless(atomic_t *v, int a, int u)
+{
+	/*
+	 * Note: argument order is switched here since it is easier
+	 * to use the first argument consistently as the "old value"
+	 * in the assembly, as is done for _atomic_cmpxchg().
+	 */
+	return __atomic_xchg_add_unless(&v->counter, __atomic_setup(v), u, a)
+		.val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add_unless);
+
+int _atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+	return __atomic_cmpxchg(&v->counter, __atomic_setup(v), o, n).val;
+}
+EXPORT_SYMBOL(_atomic_cmpxchg);
+
+unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask)
+{
+	return __atomic_or((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_or);
+
+unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask)
+{
+	return __atomic_andn((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_andn);
+
+unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask)
+{
+	return __atomic_xor((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_xor);
+
+
+u64 _atomic64_xchg(atomic64_t *v, u64 n)
+{
+	return __atomic64_xchg(&v->counter, __atomic_setup(v), n);
+}
+EXPORT_SYMBOL(_atomic64_xchg);
+
+u64 _atomic64_xchg_add(atomic64_t *v, u64 i)
+{
+	return __atomic64_xchg_add(&v->counter, __atomic_setup(v), i);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add);
+
+u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+	/*
+	 * Note: argument order is switched here since it is easier
+	 * to use the first argument consistently as the "old value"
+	 * in the assembly, as is done for _atomic_cmpxchg().
+	 */
+	return __atomic64_xchg_add_unless(&v->counter, __atomic_setup(v),
+					  u, a);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add_unless);
+
+u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+{
+	return __atomic64_cmpxchg(&v->counter, __atomic_setup(v), o, n);
+}
+EXPORT_SYMBOL(_atomic64_cmpxchg);
+
+
+static inline int *__futex_setup(int __user *v)
+{
+	/*
+	 * Issue a prefetch to the counter to bring it into cache.
+	 * As for __atomic_setup, but we can't do a read into the L1
+	 * since it might fault; instead we do a prefetch into the L2.
+	 */
+	__insn_prefetch(v);
+	return __atomic_hashed_lock((int __force *)v);
+}
+
+struct __get_user futex_set(int __user *v, int i)
+{
+	return __atomic_xchg((int __force *)v, __futex_setup(v), i);
+}
+
+struct __get_user futex_add(int __user *v, int n)
+{
+	return __atomic_xchg_add((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_or(int __user *v, int n)
+{
+	return __atomic_or((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_andn(int __user *v, int n)
+{
+	return __atomic_andn((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_xor(int __user *v, int n)
+{
+	return __atomic_xor((int __force *)v, __futex_setup(v), n);
+}
+
+struct __get_user futex_cmpxchg(int __user *v, int o, int n)
+{
+	return __atomic_cmpxchg((int __force *)v, __futex_setup(v), o, n);
+}
+
+/*
+ * If any of the atomic or futex routines hit a bad address (not in
+ * the page tables at kernel PL) this routine is called.  The futex
+ * routines are never used on kernel space, and the normal atomics and
+ * bitops are never used on user space.  So a fault on kernel space
+ * must be fatal, but a fault on userspace is a futex fault and we
+ * need to return -EFAULT.  Note that the context this routine is
+ * invoked in is the context of the "_atomic_xxx()" routines called
+ * by the functions in this file.
+ */
+struct __get_user __atomic_bad_address(int __user *addr)
+{
+	if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int))))
+		panic("Bad address used for kernel atomic op: %p\n", addr);
+	return (struct __get_user) { .err = -EFAULT };
+}
+
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+static int __init noatomichash(char *str)
+{
+	pr_warning("noatomichash is deprecated.\n");
+	return 1;
+}
+__setup("noatomichash", noatomichash);
+#endif
+
+void __init __init_atomic_per_cpu(void)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+	unsigned int i;
+	int actual_cpu;
+
+	/*
+	 * Before this is called from setup, we just have one lock for
+	 * all atomic objects/operations.  Here we replace the
+	 * elements of atomic_lock_ptr so that they point at per_cpu
+	 * integers.  This seemingly over-complex approach stems from
+	 * the fact that DEFINE_PER_CPU defines an entry for each cpu
+	 * in the grid, not each cpu from 0..ATOMIC_HASH_SIZE-1.  But
+	 * for efficient hashing of atomics to their locks we want a
+	 * compile time constant power of 2 for the size of this
+	 * table, so we use ATOMIC_HASH_SIZE.
+	 *
+	 * Here we populate atomic_lock_ptr from the per cpu
+	 * atomic_lock_pool, interspersing by actual cpu so that
+	 * subsequent elements are homed on consecutive cpus.
+	 */
+
+	actual_cpu = cpumask_first(cpu_possible_mask);
+
+	for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+		/*
+		 * Preincrement to slightly bias against using cpu 0,
+		 * which has plenty of stuff homed on it already.
+		 */
+		actual_cpu = cpumask_next(actual_cpu, cpu_possible_mask);
+		if (actual_cpu >= nr_cpu_ids)
+			actual_cpu = cpumask_first(cpu_possible_mask);
+
+		atomic_lock_ptr[i] = &per_cpu(atomic_lock_pool, actual_cpu);
+	}
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+	/* Validate power-of-two and "bigger than cpus" assumption */
+	BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
+	BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
+
+	/*
+	 * On TILEPro we prefer to use a single hash-for-home
+	 * page, since this means atomic operations are less
+	 * likely to encounter a TLB fault and thus should
+	 * in general perform faster.  You may wish to disable
+	 * this in situations where few hash-for-home tiles
+	 * are configured.
+	 */
+	BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0);
+
+	/* The locks must all fit on one page. */
+	BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
+
+	/*
+	 * We use the page offset of the atomic value's address as
+	 * an index into atomic_locks, excluding the low 3 bits.
+	 * That should not produce more indices than ATOMIC_HASH_SIZE.
+	 */
+	BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+	/* The futex code makes this assumption, so we validate it here. */
+	BUG_ON(sizeof(atomic_t) != sizeof(int));
+}
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
new file mode 100644
index 00000000000..5a5514b77e7
--- /dev/null
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Support routines for atomic operations.  Each function takes:
+ *
+ * r0: address to manipulate
+ * r1: pointer to atomic lock guarding this operation (for FUTEX_LOCK_REG)
+ * r2: new value to write, or for cmpxchg/add_unless, value to compare against
+ * r3: (cmpxchg/xchg_add_unless) new value to write or add;
+ *     (atomic64 ops) high word of value to write
+ * r4/r5: (cmpxchg64/add_unless64) new value to write or add
+ *
+ * The 32-bit routines return a "struct __get_user" so that the futex code
+ * has an opportunity to return -EFAULT to the user if needed.
+ * The 64-bit routines just return a "long long" with the value,
+ * since they are only used from kernel space and don't expect to fault.
+ * Support for 16-bit ops is included in the framework but we don't provide
+ * any (x86_64 has an atomic_inc_short(), so we might want to some day).
+ *
+ * Note that the caller is advised to issue a suitable L1 or L2
+ * prefetch on the address being manipulated to avoid extra stalls.
+ * In addition, the hot path is on two icache lines, and we start with
+ * a jump to the second line to make sure they are both in cache so
+ * that we never stall waiting on icache fill while holding the lock.
+ * (This doesn't work out with most 64-bit ops, since they consume
+ * too many bundles, so may take an extra i-cache stall.)
+ *
+ * These routines set the INTERRUPT_CRITICAL_SECTION bit, just
+ * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt
+ * the code, just page faults.
+ *
+ * If the load or store faults in a way that can be directly fixed in
+ * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it
+ * directly, return to the instruction that faulted, and retry it.
+ *
+ * If the load or store faults in a way that potentially requires us
+ * to release the atomic lock, then retry (e.g. a migrating PTE), we
+ * reset the PC in do_page_fault_ics() to the "tns" instruction so
+ * that on return we will reacquire the lock and restart the op.  We
+ * are somewhat overloading the exception_table_entry notion by doing
+ * this, since those entries are not normally used for migrating PTEs.
+ *
+ * If the main page fault handler discovers a bad address, it will see
+ * the PC pointing to the "tns" instruction (due to the earlier
+ * exception_table_entry processing in do_page_fault_ics), and
+ * re-reset the PC to the fault handler, atomic_bad_address(), which
+ * effectively takes over from the atomic op and can either return a
+ * bad "struct __get_user" (for user addresses) or can just panic (for
+ * bad kernel addresses).
+ *
+ * Note that if the value we would store is the same as what we
+ * loaded, we bypass the load.  Other platforms with true atomics can
+ * make the guarantee that a non-atomic __clear_bit(), for example,
+ * can safely race with an atomic test_and_set_bit(); this example is
+ * from bit_spinlock.h in slub_lock() / slub_unlock().  We can't do
+ * that on Tile since the "atomic" op is really just a
+ * read/modify/write, and can race with the non-atomic
+ * read/modify/write.  However, if we can short-circuit the write when
+ * it is not needed, in the atomic case, we avoid the race.
+ */
+
+#include <linux/linkage.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+	.section .text.atomic,"ax"
+ENTRY(__start_atomic_asm_code)
+
+	.macro  atomic_op, name, bitwidth, body
+	.align  64
+STD_ENTRY_SECTION(__atomic\name, .text.atomic)
+	{
+	 movei  r24, 1
+	 j      4f		/* branch to second cache line */
+	}
+1:	{
+	 .ifc \bitwidth,16
+	 lh     r22, r0
+	 .else
+	 lw     r22, r0
+	 addi   r28, r0, 4
+	 .endif
+	}
+	.ifc \bitwidth,64
+	lw      r23, r28
+	.endif
+	\body /* set r24, and r25 if 64-bit */
+	{
+	 seq    r26, r22, r24
+	 seq    r27, r23, r25
+	}
+	.ifc \bitwidth,64
+	bbnst   r27, 2f
+	.endif
+	bbs     r26, 3f		/* skip write-back if it's the same value */
+2:	{
+	 .ifc \bitwidth,16
+	 sh     r0, r24
+	 .else
+	 sw     r0, r24
+	 .endif
+	}
+	.ifc \bitwidth,64
+	sw      r28, r25
+	.endif
+	mf
+3:	{
+	 move   r0, r22
+	 .ifc \bitwidth,64
+	 move   r1, r23
+	 .else
+	 move   r1, zero
+	 .endif
+	 sw     ATOMIC_LOCK_REG_NAME, zero
+	}
+	mtspr   INTERRUPT_CRITICAL_SECTION, zero
+	jrp     lr
+4:	{
+	 move   ATOMIC_LOCK_REG_NAME, r1
+	 mtspr  INTERRUPT_CRITICAL_SECTION, r24
+	}
+#ifndef CONFIG_SMP
+	j       1b		/* no atomic locks */
+#else
+	{
+	 tns    r21, ATOMIC_LOCK_REG_NAME
+	 moveli r23, 2048       /* maximum backoff time in cycles */
+	}
+	{
+	 bzt    r21, 1b		/* branch if lock acquired */
+	 moveli r25, 32         /* starting backoff time in cycles */
+	}
+5:	mtspr   INTERRUPT_CRITICAL_SECTION, zero
+	mfspr   r26, CYCLE_LOW  /* get start point for this backoff */
+6:	mfspr   r22, CYCLE_LOW  /* test to see if we've backed off enough */
+	sub     r22, r22, r26
+	slt     r22, r22, r25
+	bbst    r22, 6b
+	{
+	 mtspr  INTERRUPT_CRITICAL_SECTION, r24
+	 shli   r25, r25, 1     /* double the backoff; retry the tns */
+	}
+	{
+	 tns    r21, ATOMIC_LOCK_REG_NAME
+	 slt    r26, r23, r25   /* is the proposed backoff too big? */
+	}
+	{
+	 bzt    r21, 1b		/* branch if lock acquired */
+	 mvnz   r25, r26, r23
+	}
+	j       5b
+#endif
+	STD_ENDPROC(__atomic\name)
+	.ifc \bitwidth,32
+	.pushsection __ex_table,"a"
+	.word   1b, __atomic\name
+	.word   2b, __atomic\name
+	.word   __atomic\name, __atomic_bad_address
+	.popsection
+	.endif
+	.endm
+
+atomic_op _cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }"
+atomic_op _xchg, 32, "move r24, r2"
+atomic_op _xchg_add, 32, "add r24, r22, r2"
+atomic_op _xchg_add_unless, 32, \
+	"sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }"
+atomic_op _or, 32, "or r24, r22, r2"
+atomic_op _andn, 32, "nor r2, r2, zero; and r24, r22, r2"
+atomic_op _xor, 32, "xor r24, r22, r2"
+
+atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \
+	{ bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }"
+atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }"
+atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \
+	slt_u r26, r24, r22; add r25, r25, r26"
+atomic_op 64_xchg_add_unless, 64, \
+	"{ sne r26, r22, r2; sne r27, r23, r3 }; \
+	{ bbns r26, 3f; add r24, r22, r4 }; \
+	{ bbns r27, 3f; add r25, r23, r5 }; \
+	slt_u r26, r24, r22; add r25, r25, r26"
+
+	jrp     lr              /* happy backtracer */
+
+ENTRY(__end_atomic_asm_code)
diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
new file mode 100644
index 00000000000..11b6164c209
--- /dev/null
+++ b/arch/tile/lib/cacheflush.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <arch/icache.h>
+
+
+void __flush_icache_range(unsigned long start, unsigned long end)
+{
+	invalidate_icache((const void *)start, end - start, PAGE_SIZE);
+}
diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c
new file mode 100644
index 00000000000..e4bab5bd3f3
--- /dev/null
+++ b/arch/tile/lib/checksum.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ * Support code for the main lib/checksum.c.
+ */
+
+#include <net/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned int longto16(unsigned long x)
+{
+	unsigned long ret;
+#ifdef __tilegx__
+	ret = __insn_v2sadu(x, 0);
+	ret = __insn_v2sadu(ret, 0);
+#else
+	ret = __insn_sadh_u(x, 0);
+	ret = __insn_sadh_u(ret, 0);
+#endif
+	return ret;
+}
+
+__wsum do_csum(const unsigned char *buff, int len)
+{
+	int odd, count;
+	unsigned long result = 0;
+
+	if (len <= 0)
+		goto out;
+	odd = 1 & (unsigned long) buff;
+	if (odd) {
+		result = (*buff << 8);
+		len--;
+		buff++;
+	}
+	count = len >> 1;		/* nr of 16-bit words.. */
+	if (count) {
+		if (2 & (unsigned long) buff) {
+			result += *(const unsigned short *)buff;
+			count--;
+			len -= 2;
+			buff += 2;
+		}
+		count >>= 1;		/* nr of 32-bit words.. */
+		if (count) {
+#ifdef __tilegx__
+			if (4 & (unsigned long) buff) {
+				unsigned int w = *(const unsigned int *)buff;
+				result = __insn_v2sadau(result, w, 0);
+				count--;
+				len -= 4;
+				buff += 4;
+			}
+			count >>= 1;		/* nr of 64-bit words.. */
+#endif
+
+			/*
+			 * This algorithm could wrap around for very
+			 * large buffers, but those should be impossible.
+			 */
+			BUG_ON(count >= 65530);
+
+			while (count) {
+				unsigned long w = *(const unsigned long *)buff;
+				count--;
+				buff += sizeof(w);
+#ifdef __tilegx__
+				result = __insn_v2sadau(result, w, 0);
+#else
+				result = __insn_sadah_u(result, w, 0);
+#endif
+			}
+#ifdef __tilegx__
+			if (len & 4) {
+				unsigned int w = *(const unsigned int *)buff;
+				result = __insn_v2sadau(result, w, 0);
+				buff += 4;
+			}
+#endif
+		}
+		if (len & 2) {
+			result += *(const unsigned short *) buff;
+			buff += 2;
+		}
+	}
+	if (len & 1)
+		result += *buff;
+	result = longto16(result);
+	if (odd)
+		result = swab16(result);
+out:
+	return result;
+}
diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c
new file mode 100644
index 00000000000..fdc403614d1
--- /dev/null
+++ b/arch/tile/lib/cpumask.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+/*
+ * Allow cropping out bits beyond the end of the array.
+ * Move to "lib" directory if more clients want to use this routine.
+ */
+int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits)
+{
+	unsigned a, b;
+
+	bitmap_zero(maskp, nmaskbits);
+	do {
+		if (!isdigit(*bp))
+			return -EINVAL;
+		a = simple_strtoul(bp, (char **)&bp, 10);
+		b = a;
+		if (*bp == '-') {
+			bp++;
+			if (!isdigit(*bp))
+				return -EINVAL;
+			b = simple_strtoul(bp, (char **)&bp, 10);
+		}
+		if (!(a <= b))
+			return -EINVAL;
+		if (b >= nmaskbits)
+			b = nmaskbits-1;
+		while (a <= b) {
+			set_bit(a, maskp);
+			a++;
+		}
+		if (*bp == ',')
+			bp++;
+	} while (*bp != '\0' && *bp != '\n');
+	return 0;
+}
diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c
new file mode 100644
index 00000000000..5801b03c13e
--- /dev/null
+++ b/arch/tile/lib/delay.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/thread_info.h>
+#include <asm/fixmap.h>
+#include <hv/hypervisor.h>
+
+void __udelay(unsigned long usecs)
+{
+	hv_nanosleep(usecs * 1000);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+	hv_nanosleep(nsecs);
+}
+EXPORT_SYMBOL(__ndelay);
+
+/* FIXME: should be declared in a header somewhere. */
+EXPORT_SYMBOL(__delay);
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
new file mode 100644
index 00000000000..6bc7b52b4aa
--- /dev/null
+++ b/arch/tile/lib/exports.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Exports from assembler code and from libtile-cc.
+ */
+
+#include <linux/module.h>
+
+/* arch/tile/lib/usercopy.S */
+#include <linux/uaccess.h>
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+EXPORT_SYMBOL(strnlen_user_asm);
+EXPORT_SYMBOL(strncpy_from_user_asm);
+EXPORT_SYMBOL(clear_user_asm);
+
+/* arch/tile/kernel/entry.S */
+#include <linux/kernel.h>
+#include <asm/processor.h>
+EXPORT_SYMBOL(current_text_addr);
+EXPORT_SYMBOL(dump_stack);
+
+/* arch/tile/lib/__memcpy.S */
+/* NOTE: on TILE64, these symbols appear in arch/tile/lib/memcpy_tile64.c */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(__copy_to_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_zeroing);
+
+/* hypervisor glue */
+#include <hv/hypervisor.h>
+EXPORT_SYMBOL(hv_dev_open);
+EXPORT_SYMBOL(hv_dev_pread);
+EXPORT_SYMBOL(hv_dev_pwrite);
+EXPORT_SYMBOL(hv_dev_close);
+
+/* -ltile-cc */
+uint32_t __udivsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__udivsi3);
+int32_t __divsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__divsi3);
+uint64_t __udivdi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__udivdi3);
+int64_t __divdi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__divdi3);
+uint32_t __umodsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__umodsi3);
+int32_t __modsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__modsi3);
+uint64_t __umoddi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__umoddi3);
+int64_t __moddi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__moddi3);
+#ifndef __tilegx__
+uint64_t __ll_mul(uint64_t n0, uint64_t n1);
+EXPORT_SYMBOL(__ll_mul);
+#endif
+#ifndef __tilegx__
+int64_t __muldi3(int64_t, int64_t);
+EXPORT_SYMBOL(__muldi3);
+uint64_t __lshrdi3(uint64_t, unsigned int);
+EXPORT_SYMBOL(__lshrdi3);
+#endif
diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S
new file mode 100644
index 00000000000..989ad7b68d5
--- /dev/null
+++ b/arch/tile/lib/mb_incoherent.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Assembly code for invoking the HV's fence_incoherent syscall.
+ */
+
+#include <linux/linkage.h>
+#include <hv/syscall_public.h>
+#include <arch/abi.h>
+#include <arch/chip.h>
+
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+
+/*
+ * Invoke the hypervisor's fence_incoherent syscall, which guarantees
+ * that all victims for cachelines homed on this tile have reached memory.
+ */
+STD_ENTRY(__mb_incoherent)
+	moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent
+	swint2
+	jrp lr
+	STD_ENDPROC(__mb_incoherent)
+
+#endif
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
new file mode 100644
index 00000000000..6235283b485
--- /dev/null
+++ b/arch/tile/lib/memchr_32.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memchr(const void *s, int c, size_t n)
+{
+	/* Get an aligned pointer. */
+	const uintptr_t s_int = (uintptr_t) s;
+	const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+	/* Create four copies of the byte for which we are looking. */
+	const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+	/* Read the first word, but munge it so that bytes before the array
+	 * will not match goal.
+	 *
+	 * Note that this shift count expression works because we know
+	 * shift counts are taken mod 32.
+	 */
+	const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+	uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+
+	/* Compute the address of the last byte. */
+	const char *const last_byte_ptr = (const char *)s + n - 1;
+
+	/* Compute the address of the word containing the last byte. */
+	const uint32_t *const last_word_ptr =
+	    (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
+
+	uint32_t bits;
+	char *ret;
+
+	if (__builtin_expect(n == 0, 0)) {
+		/* Don't dereference any memory if the array is empty. */
+		return NULL;
+	}
+
+	while ((bits = __insn_seqb(v, goal)) == 0) {
+		if (__builtin_expect(p == last_word_ptr, 0)) {
+			/* We already read the last word in the array,
+			 * so give up.
+			 */
+			return NULL;
+		}
+		v = *++p;
+	}
+
+	/* We found a match, but it might be in a byte past the end
+	 * of the array.
+	 */
+	ret = ((char *)p) + (__insn_ctz(bits) >> 3);
+	return (ret <= last_byte_ptr) ? ret : NULL;
+}
+EXPORT_SYMBOL(memchr);
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
new file mode 100644
index 00000000000..f92984bf60e
--- /dev/null
+++ b/arch/tile/lib/memcpy_32.S
@@ -0,0 +1,628 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This file shares the implementation of the userspace memcpy and
+ * the kernel's memcpy, copy_to_user and copy_from_user.
+ */
+
+#include <arch/chip.h>
+
+#if CHIP_HAS_WH64() || defined(MEMCPY_TEST_WH64)
+#define MEMCPY_USE_WH64
+#endif
+
+
+#include <linux/linkage.h>
+
+/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+#define memcpy __memcpy_asm
+#define __copy_to_user_inatomic __copy_to_user_inatomic_asm
+#define __copy_from_user_inatomic __copy_from_user_inatomic_asm
+#define __copy_from_user_zeroing __copy_from_user_zeroing_asm
+#endif
+
+#define IS_MEMCPY	  0
+#define IS_COPY_FROM_USER  1
+#define IS_COPY_FROM_USER_ZEROING  2
+#define IS_COPY_TO_USER   -1
+
+	.section .text.memcpy_common, "ax"
+	.align 64
+
+/* Use this to preface each bundle that can cause an exception so
+ * the kernel can clean up properly. The special cleanup code should
+ * not use these, since it knows what it is doing.
+ */
+#define EX \
+	.pushsection __ex_table, "a"; \
+	.word 9f, memcpy_common_fixup; \
+	.popsection; \
+	9
+
+
+/* __copy_from_user_inatomic takes the kernel target address in r0,
+ * the user source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_from_user_inatomic)
+.type __copy_from_user_inatomic, @function
+        FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
+	  .text.memcpy_common, \
+          .Lend_memcpy_common - __copy_from_user_inatomic)
+	{ movei r29, IS_COPY_FROM_USER; j memcpy_common }
+	.size __copy_from_user_inatomic, . - __copy_from_user_inatomic
+
+/* __copy_from_user_zeroing is like __copy_from_user_inatomic, but
+ * any uncopiable bytes are zeroed in the target.
+ */
+ENTRY(__copy_from_user_zeroing)
+.type __copy_from_user_zeroing, @function
+        FEEDBACK_REENTER(__copy_from_user_inatomic)
+	{ movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common }
+	.size __copy_from_user_zeroing, . - __copy_from_user_zeroing
+
+/* __copy_to_user_inatomic takes the user target address in r0,
+ * the kernel source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_to_user_inatomic)
+.type __copy_to_user_inatomic, @function
+        FEEDBACK_REENTER(__copy_from_user_inatomic)
+	{ movei r29, IS_COPY_TO_USER; j memcpy_common }
+	.size __copy_to_user_inatomic, . - __copy_to_user_inatomic
+
+ENTRY(memcpy)
+.type memcpy, @function
+        FEEDBACK_REENTER(__copy_from_user_inatomic)
+	{ movei r29, IS_MEMCPY }
+	.size memcpy, . - memcpy
+	/* Fall through */
+
+	.type memcpy_common, @function
+memcpy_common:
+	/* On entry, r29 holds one of the IS_* macro values from above. */
+
+
+	/* r0 is the dest, r1 is the source, r2 is the size. */
+
+	/* Save aside original dest so we can return it at the end. */
+	{ sw sp, lr; move r23, r0; or r4, r0, r1 }
+
+	/* Check for an empty size. */
+	{ bz r2, .Ldone; andi r4, r4, 3 }
+
+	/* Save aside original values in case of a fault. */
+	{ move r24, r1; move r25, r2 }
+	move r27, lr
+
+	/* Check for an unaligned source or dest. */
+	{ bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 }
+
+.Lcheck_aligned_copy_size:
+	/* If we are copying < 256 bytes, branch to simple case. */
+	{ blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+
+	/* Copying >= 256 bytes, so jump to complex prefetching loop. */
+	{ andi r6, r1, 63; j .Lcopy_many }
+
+/*
+ *
+ * Aligned 4 byte at a time copy loop
+ *
+ */
+
+.Lcopy_8_loop:
+	/* Copy two words at a time to hide load latency. */
+EX:	{ lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 }
+EX:	{ lw r4, r1; addi r1, r1, 4 }
+EX:	{ sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+EX:	{ sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_8_check:
+	{ bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 }
+
+	/* Copy odd leftover word, if any. */
+	{ bnzt r4, .Lcheck_odd_stragglers }
+EX:	{ lw r3, r1; addi r1, r1, 4 }
+EX:	{ sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+
+.Lcheck_odd_stragglers:
+	{ bnz r2, .Lcopy_unaligned_few }
+
+.Ldone:
+	/* For memcpy return original dest address, else zero. */
+	{ mz r0, r29, r23; jrp lr }
+
+
+/*
+ *
+ * Prefetching multiple cache line copy handler (for large transfers).
+ *
+ */
+
+	/* Copy words until r1 is cache-line-aligned. */
+.Lalign_loop:
+EX:	{ lw r3, r1; addi r1, r1, 4 }
+	{ andi r6, r1, 63 }
+EX:	{ sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_many:
+	{ bnzt r6, .Lalign_loop; addi r9, r0, 63 }
+
+	{ addi r3, r1, 60; andi r9, r9, -64 }
+
+#ifdef MEMCPY_USE_WH64
+        /* No need to prefetch dst, we'll just do the wh64
+         * right before we copy a line.
+	 */
+#endif
+
+EX:	{ lw r5, r3; addi r3, r3, 64; movei r4, 1 }
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bnzt zero, .; move r27, lr }
+EX:	{ lw r6, r3; addi r3, r3, 64 }
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bnzt zero, . }
+EX:	{ lw r7, r3; addi r3, r3, 64 }
+#ifndef MEMCPY_USE_WH64
+        /* Prefetch the dest */
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bnzt zero, . }
+        /* Use a real load to cause a TLB miss if necessary.  We aren't using
+         * r28, so this should be fine.
+         */
+EX:	{ lw r28, r9; addi r9, r9, 64 }
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bnzt zero, . }
+        { prefetch r9; addi r9, r9, 64 }
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bnzt zero, . }
+        { prefetch r9; addi r9, r9, 64 }
+#endif
+        /* Intentionally stall for a few cycles to leave L2 cache alone. */
+        { bz zero, .Lbig_loop2 }
+
+	/* On entry to this loop:
+	 * - r0 points to the start of dst line 0
+	 * - r1 points to start of src line 0
+	 * - r2 >= (256 - 60), only the first time the loop trips.
+	 * - r3 contains r1 + 128 + 60    [pointer to end of source line 2]
+	 *   This is our prefetch address. When we get near the end
+	 *   rather than prefetching off the end this is changed to point
+	 *   to some "safe" recently loaded address.
+	 * - r5 contains *(r1 + 60)       [i.e. last word of source line 0]
+	 * - r6 contains *(r1 + 64 + 60)  [i.e. last word of source line 1]
+         * - r9 contains ((r0 + 63) & -64)
+	 *     [start of next dst cache line.]
+	 */
+
+.Lbig_loop:
+	{ jal .Lcopy_line2; add r15, r1, r2 }
+
+.Lbig_loop2:
+	/* Copy line 0, first stalling until r5 is ready. */
+EX:	{ move r12, r5; lw r16, r1 }
+	{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+        /* Prefetch several lines ahead. */
+EX:	{ lw r5, r3; addi r3, r3, 64 }
+        { jal .Lcopy_line }
+
+	/* Copy line 1, first stalling until r6 is ready. */
+EX:	{ move r12, r6; lw r16, r1 }
+	{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+        /* Prefetch several lines ahead. */
+EX:	{ lw r6, r3; addi r3, r3, 64 }
+	{ jal .Lcopy_line }
+
+	/* Copy line 2, first stalling until r7 is ready. */
+EX:	{ move r12, r7; lw r16, r1 }
+	{ bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+        /* Prefetch several lines ahead. */
+EX:	{ lw r7, r3; addi r3, r3, 64 }
+        /* Use up a caches-busy cycle by jumping back to the top of the
+         * loop. Might as well get it out of the way now.
+         */
+        { j .Lbig_loop }
+
+
+	/* On entry:
+	 * - r0 points to the destination line.
+	 * - r1 points to the source line.
+         * - r3 is the next prefetch address.
+	 * - r9 holds the last address used for wh64.
+	 * - r12 = WORD_15
+         * - r16 = WORD_0.
+         * - r17 == r1 + 16.
+         * - r27 holds saved lr to restore.
+	 *
+	 * On exit:
+	 * - r0 is incremented by 64.
+	 * - r1 is incremented by 64, unless that would point to a word
+         *   beyond the end of the source array, in which case it is redirected
+         *   to point to an arbitrary word already in the cache.
+	 * - r2 is decremented by 64.
+         * - r3 is unchanged, unless it points to a word beyond the
+         *   end of the source array, in which case it is redirected
+         *   to point to an arbitrary word already in the cache.
+         *   Redirecting is OK since if we are that close to the end
+         *   of the array we will not come back to this subroutine
+         *   and use the contents of the prefetched address.
+	 * - r4 is nonzero iff r2 >= 64.
+         * - r9 is incremented by 64, unless it points beyond the
+         *   end of the last full destination cache line, in which
+         *   case it is redirected to a "safe address" that can be
+         *   clobbered (sp - 64)
+	 * - lr contains the value in r27.
+	 */
+
+/* r26 unused */
+
+.Lcopy_line:
+        /* TODO: when r3 goes past the end, we would like to redirect it
+         * to prefetch the last partial cache line (if any) just once, for the
+         * benefit of the final cleanup loop. But we don't want to
+         * prefetch that line more than once, or subsequent prefetches
+         * will go into the RTF. But then .Lbig_loop should unconditionally
+         * branch to top of loop to execute final prefetch, and its
+         * nop should become a conditional branch.
+         */
+
+        /* We need two non-memory cycles here to cover the resources
+         * used by the loads initiated by the caller.
+         */
+        { add r15, r1, r2 }
+.Lcopy_line2:
+        { slt_u r13, r3, r15; addi r17, r1, 16 }
+
+        /* NOTE: this will stall for one cycle as L1 is busy. */
+
+        /* Fill second L1D line. */
+EX:	{ lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
+
+#ifdef MEMCPY_TEST_WH64
+        /* Issue a fake wh64 that clobbers the destination words
+         * with random garbage, for testing.
+         */
+	{ movei r19, 64; crc32_32 r10, r2, r9 }
+.Lwh64_test_loop:
+EX:	{ sw r9, r10; addi r9, r9, 4; addi r19, r19, -4 }
+        { bnzt r19, .Lwh64_test_loop; crc32_32 r10, r10, r19 }
+#elif CHIP_HAS_WH64()
+        /* Prepare destination line for writing. */
+EX:	{ wh64 r9; addi r9, r9, 64 }
+#else
+        /* Prefetch dest line */
+	{ prefetch r9; addi r9, r9, 64 }
+#endif
+        /* Load seven words that are L1D hits to cover wh64 L2 usage. */
+
+        /* Load the three remaining words from the last L1D line, which
+         * we know has already filled the L1D.
+         */
+EX:	{ lw r4, r1;  addi r1, r1, 4;   addi r20, r1, 16 }   /* r4 = WORD_12 */
+EX:	{ lw r8, r1;  addi r1, r1, 4;   slt_u r13, r20, r15 }/* r8 = WORD_13 */
+EX:	{ lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 }  /* r11 = WORD_14 */
+
+        /* Load the three remaining words from the first L1D line, first
+         * stalling until it has filled by "looking at" r16.
+         */
+EX:	{ lw r13, r1; addi r1, r1, 4; move zero, r16 }   /* r13 = WORD_1 */
+EX:	{ lw r14, r1; addi r1, r1, 4 }                   /* r14 = WORD_2 */
+EX:	{ lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */
+
+        /* Load second word from the second L1D line, first
+         * stalling until it has filled by "looking at" r17.
+         */
+EX:	{ lw r19, r1; addi r1, r1, 4; move zero, r17 }  /* r19 = WORD_5 */
+
+        /* Store last word to the destination line, potentially dirtying it
+         * for the first time, which keeps the L2 busy for two cycles.
+         */
+EX:	{ sw r10, r12 }                                 /* store(WORD_15) */
+
+        /* Use two L1D hits to cover the sw L2 access above. */
+EX:	{ lw r10, r1; addi r1, r1, 4 }                  /* r10 = WORD_6 */
+EX:	{ lw r12, r1; addi r1, r1, 4 }                  /* r12 = WORD_7 */
+
+        /* Fill third L1D line. */
+EX:	{ lw r18, r1; addi r1, r1, 4 }                  /* r18 = WORD_8 */
+
+        /* Store first L1D line. */
+EX:	{ sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
+EX:	{ sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
+EX:	{ sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
+#ifdef MEMCPY_USE_WH64
+EX:	{ sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
+#else
+        /* Back up the r9 to a cache line we are already storing to
+	 * if it gets past the end of the dest vector.  Strictly speaking,
+	 * we don't need to back up to the start of a cache line, but it's free
+	 * and tidy, so why not?
+         */
+EX:	{ sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
+#endif
+        /* Store second L1D line. */
+EX:	{ sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
+EX:	{ sw r0, r19; addi r0, r0, 4 }                  /* store(WORD_5) */
+EX:	{ sw r0, r10; addi r0, r0, 4 }                  /* store(WORD_6) */
+EX:	{ sw r0, r12; addi r0, r0, 4 }                  /* store(WORD_7) */
+
+EX:	{ lw r13, r1; addi r1, r1, 4; move zero, r18 }  /* r13 = WORD_9 */
+EX:	{ lw r14, r1; addi r1, r1, 4 }                  /* r14 = WORD_10 */
+EX:	{ lw r15, r1; move r1, r20   }                  /* r15 = WORD_11 */
+
+        /* Store third L1D line. */
+EX:	{ sw r0, r18; addi r0, r0, 4 }                  /* store(WORD_8) */
+EX:	{ sw r0, r13; addi r0, r0, 4 }                  /* store(WORD_9) */
+EX:	{ sw r0, r14; addi r0, r0, 4 }                  /* store(WORD_10) */
+EX:	{ sw r0, r15; addi r0, r0, 4 }                  /* store(WORD_11) */
+
+        /* Store rest of fourth L1D line. */
+EX:	{ sw r0, r4;  addi r0, r0, 4 }                  /* store(WORD_12) */
+        {
+EX:	sw r0, r8                                       /* store(WORD_13) */
+        addi r0, r0, 4
+	/* Will r2 be > 64 after we subtract 64 below? */
+        shri r4, r2, 7
+        }
+        {
+EX:	sw r0, r11                                      /* store(WORD_14) */
+        addi r0, r0, 8
+        /* Record 64 bytes successfully copied. */
+        addi r2, r2, -64
+        }
+
+	{ jrp lr; move lr, r27 }
+
+        /* Convey to the backtrace library that the stack frame is size
+	 * zero, and the real return address is on the stack rather than
+	 * in 'lr'.
+	 */
+	{ info 8 }
+
+	.align 64
+.Lcopy_unaligned_maybe_many:
+	/* Skip the setup overhead if we aren't copying many bytes. */
+	{ slti_u r8, r2, 20; sub r4, zero, r0 }
+	{ bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 }
+	{ bz r4, .Ldest_is_word_aligned; add r18, r1, r2 }
+
+/*
+ *
+ * unaligned 4 byte at a time copy handler.
+ *
+ */
+
+	/* Copy single bytes until r0 == 0 mod 4, so we can store words. */
+.Lalign_dest_loop:
+EX:	{ lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 }
+EX:	{ sb r0, r3;   addi r0, r0, 1; addi r2, r2, -1 }
+	{ bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 }
+
+	/* If source and dest are now *both* aligned, do an aligned copy. */
+	{ bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 }
+
+.Ldest_is_word_aligned:
+
+#if CHIP_HAS_DWORD_ALIGN()
+EX:	{ andi r8, r0, 63; lwadd_na r6, r1, 4}
+	{ slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned }
+
+	/* This copies unaligned words until either there are fewer
+	 * than 4 bytes left to copy, or until the destination pointer
+	 * is cache-aligned, whichever comes first.
+	 *
+	 * On entry:
+	 * - r0 is the next store address.
+	 * - r1 points 4 bytes past the load address corresponding to r0.
+	 * - r2 >= 4
+	 * - r6 is the next aligned word loaded.
+	 */
+.Lcopy_unaligned_src_words:
+EX:	{ lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 }
+	/* stall */
+	{ dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 }
+EX:	{ swadd r0, r6, 4; addi r2, r2, -4 }
+	{ bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 }
+	{ bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+	/* On entry:
+	 * - r0 is the next store address.
+	 * - r1 points 4 bytes past the load address corresponding to r0.
+	 * - r2 >= 4 (# of bytes left to store).
+	 * - r6 is the next aligned src word value.
+	 * - r9 = (r2 < 64U).
+	 * - r18 points one byte past the end of source memory.
+	 */
+.Ldest_is_L2_line_aligned:
+
+	{
+	/* Not a full cache line remains. */
+	bnz r9, .Lcleanup_unaligned_words
+	move r7, r6
+	}
+
+	/* r2 >= 64 */
+
+	/* Kick off two prefetches, but don't go past the end. */
+	{ addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 }
+	{ prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+	{ mvz r3, r8, r1; addi r8, r3, 64 }
+	{ prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+	{ mvz r3, r8, r1; movei r17, 0 }
+
+.Lcopy_unaligned_line:
+	/* Prefetch another line. */
+	{ prefetch r3; addi r15, r1, 60; addi r3, r3, 64 }
+	/* Fire off a load of the last word we are about to copy. */
+EX:	{ lw_na r15, r15; slt_u r8, r3, r18 }
+
+EX:	{ mvz r3, r8, r1; wh64 r0 }
+
+	/* This loop runs twice.
+	 *
+	 * On entry:
+	 * - r17 is even before the first iteration, and odd before
+	 *   the second.  It is incremented inside the loop.  Encountering
+	 *   an even value at the end of the loop makes it stop.
+	 */
+.Lcopy_half_an_unaligned_line:
+EX:	{
+	/* Stall until the last byte is ready. In the steady state this
+	 * guarantees all words to load below will be in the L2 cache, which
+	 * avoids shunting the loads to the RTF.
+	 */
+	move zero, r15
+	lwadd_na r7, r1, 16
+	}
+EX:	{ lwadd_na r11, r1, 12 }
+EX:	{ lwadd_na r14, r1, -24 }
+EX:	{ lwadd_na r8, r1, 4 }
+EX:	{ lwadd_na r9, r1, 4 }
+EX:	{
+	lwadd_na r10, r1, 8
+	/* r16 = (r2 < 64), after we subtract 32 from r2 below. */
+	slti_u r16, r2, 64 + 32
+	}
+EX:	{ lwadd_na r12, r1, 4; addi r17, r17, 1 }
+EX:	{ lwadd_na r13, r1, 8; dword_align r6, r7, r1 }
+EX:	{ swadd r0, r6,  4; dword_align r7,  r8,  r1 }
+EX:	{ swadd r0, r7,  4; dword_align r8,  r9,  r1 }
+EX:	{ swadd r0, r8,  4; dword_align r9,  r10, r1 }
+EX:	{ swadd r0, r9,  4; dword_align r10, r11, r1 }
+EX:	{ swadd r0, r10, 4; dword_align r11, r12, r1 }
+EX:	{ swadd r0, r11, 4; dword_align r12, r13, r1 }
+EX:	{ swadd r0, r12, 4; dword_align r13, r14, r1 }
+EX:	{ swadd r0, r13, 4; addi r2, r2, -32 }
+	{ move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line }
+
+	{ bzt r16, .Lcopy_unaligned_line; move r7, r6 }
+
+	/* On entry:
+	 * - r0 is the next store address.
+	 * - r1 points 4 bytes past the load address corresponding to r0.
+	 * - r2 >= 0 (# of bytes left to store).
+	 * - r7 is the next aligned src word value.
+	 */
+.Lcleanup_unaligned_words:
+	/* Handle any trailing bytes. */
+	{ bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 }
+	{ bzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+	/* Move r1 back to the point where it corresponds to r0. */
+	{ addi r1, r1, -4 }
+
+#else /* !CHIP_HAS_DWORD_ALIGN() */
+
+	/* Compute right/left shift counts and load initial source words. */
+	{ andi r5, r1, -4; andi r3, r1, 3 }
+EX:	{ lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 }
+EX:	{ lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 }
+
+	/* Load and store one word at a time, using shifts and ORs
+	 * to correct for the misaligned src.
+	 */
+.Lcopy_unaligned_src_loop:
+	{ shr r6, r6, r3; shl r8, r7, r4 }
+EX:	{ lw r7, r5; or r8, r8, r6; move r6, r7 }
+EX:	{ sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 }
+	{ addi r5, r5, 4; slti_u r8, r2, 8 }
+	{ bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 }
+
+	{ bz r2, .Lcopy_unaligned_done }
+#endif /* !CHIP_HAS_DWORD_ALIGN() */
+
+	/* Fall through */
+
+/*
+ *
+ * 1 byte at a time copy handler.
+ *
+ */
+
+.Lcopy_unaligned_few:
+EX:	{ lb_u r3, r1; addi r1, r1, 1 }
+EX:	{ sb r0, r3;   addi r0, r0, 1; addi r2, r2, -1 }
+	{ bnzt r2, .Lcopy_unaligned_few }
+
+.Lcopy_unaligned_done:
+
+	/* For memcpy return original dest address, else zero. */
+	{ mz r0, r29, r23; jrp lr }
+
+.Lend_memcpy_common:
+	.size memcpy_common, .Lend_memcpy_common - memcpy_common
+
+	.section .fixup,"ax"
+memcpy_common_fixup:
+	.type memcpy_common_fixup, @function
+
+	/* Skip any bytes we already successfully copied.
+	 * r2 (num remaining) is correct, but r0 (dst) and r1 (src)
+	 * may not be quite right because of unrolling and prefetching.
+	 * So we need to recompute their values as the address just
+	 * after the last byte we are sure was successfully loaded and
+	 * then stored.
+	 */
+
+	/* Determine how many bytes we successfully copied. */
+	{ sub r3, r25, r2 }
+
+	/* Add this to the original r0 and r1 to get their new values. */
+	{ add r0, r23, r3; add r1, r24, r3 }
+
+	{ bzt r29, memcpy_fixup_loop }
+	{ blzt r29, copy_to_user_fixup_loop }
+
+copy_from_user_fixup_loop:
+	/* Try copying the rest one byte at a time, expecting a load fault. */
+.Lcfu:	{ lb_u r3, r1; addi r1, r1, 1 }
+	{ sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+	{ bnzt r2, copy_from_user_fixup_loop }
+
+.Lcopy_from_user_fixup_zero_remainder:
+	{ bbs r29, 2f }  /* low bit set means IS_COPY_FROM_USER */
+	/* byte-at-a-time loop faulted, so zero the rest. */
+	{ move r3, r2; bz r2, 2f /* should be impossible, but handle it. */ }
+1:      { sb r0, zero; addi r0, r0, 1; addi r3, r3, -1 }
+	{ bnzt r3, 1b }
+2:	move lr, r27
+	{ move r0, r2; jrp lr }
+
+copy_to_user_fixup_loop:
+	/* Try copying the rest one byte at a time, expecting a store fault. */
+	{ lb_u r3, r1; addi r1, r1, 1 }
+.Lctu:	{ sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+	{ bnzt r2, copy_to_user_fixup_loop }
+.Lcopy_to_user_fixup_done:
+	move lr, r27
+	{ move r0, r2; jrp lr }
+
+memcpy_fixup_loop:
+	/* Try copying the rest one byte at a time. We expect a disastrous
+	 * fault to happen since we are in fixup code, but let it happen.
+	 */
+	{ lb_u r3, r1; addi r1, r1, 1 }
+	{ sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+	{ bnzt r2, memcpy_fixup_loop }
+	/* This should be unreachable, we should have faulted again.
+	 * But be paranoid and handle it in case some interrupt changed
+	 * the TLB or something.
+	 */
+	move lr, r27
+	{ move r0, r23; jrp lr }
+
+	.size memcpy_common_fixup, . - memcpy_common_fixup
+
+	.section __ex_table,"a"
+	.word .Lcfu, .Lcopy_from_user_fixup_zero_remainder
+	.word .Lctu, .Lcopy_to_user_fixup_done
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
new file mode 100644
index 00000000000..dfedea7b266
--- /dev/null
+++ b/arch/tile/lib/memcpy_tile64.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/fixmap.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+
+/* Defined in memcpy.S */
+extern unsigned long __memcpy_asm(void *to, const void *from, unsigned long n);
+extern unsigned long __copy_to_user_inatomic_asm(
+	void __user *to, const void *from, unsigned long n);
+extern unsigned long __copy_from_user_inatomic_asm(
+	void *to, const void __user *from, unsigned long n);
+extern unsigned long __copy_from_user_zeroing_asm(
+	void *to, const void __user *from, unsigned long n);
+
+typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
+
+/* Size above which to consider TLB games for performance */
+#define LARGE_COPY_CUTOFF 2048
+
+/* Communicate to the simulator what we are trying to do. */
+#define sim_allow_multiple_caching(b) \
+  __insn_mtspr(SPR_SIM_CONTROL, \
+   SIM_CONTROL_ALLOW_MULTIPLE_CACHING | ((b) << _SIM_CONTROL_OPERATOR_BITS))
+
+/*
+ * Copy memory by briefly enabling incoherent cacheline-at-a-time mode.
+ *
+ * We set up our own source and destination PTEs that we fully control.
+ * This is the only way to guarantee that we don't race with another
+ * thread that is modifying the PTE; we can't afford to try the
+ * copy_{to,from}_user() technique of catching the interrupt, since
+ * we must run with interrupts disabled to avoid the risk of some
+ * other code seeing the incoherent data in our cache.  (Recall that
+ * our cache is indexed by PA, so even if the other code doesn't use
+ * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * the normal VAs that aren't supposed to hit in cache.)
+ */
+static void memcpy_multicache(void *dest, const void *source,
+			      pte_t dst_pte, pte_t src_pte, int len)
+{
+	int idx;
+	unsigned long flags, newsrc, newdst;
+	pmd_t *pmdp;
+	pte_t *ptep;
+	int cpu = get_cpu();
+
+	/*
+	 * Disable interrupts so that we don't recurse into memcpy()
+	 * in an interrupt handler, nor accidentally reference
+	 * the PA of the source from an interrupt routine.  Also
+	 * notify the simulator that we're playing games so we don't
+	 * generate spurious coherency warnings.
+	 */
+	local_irq_save(flags);
+	sim_allow_multiple_caching(1);
+
+	/* Set up the new dest mapping */
+	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+	newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
+	pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
+	ptep = pte_offset_kernel(pmdp, newdst);
+	if (pte_val(*ptep) != pte_val(dst_pte)) {
+		set_pte(ptep, dst_pte);
+		local_flush_tlb_page(NULL, newdst, PAGE_SIZE);
+	}
+
+	/* Set up the new source mapping */
+	idx += (KM_MEMCPY0 - KM_MEMCPY1);
+	src_pte = hv_pte_set_nc(src_pte);
+	src_pte = hv_pte_clear_writable(src_pte);  /* be paranoid */
+	newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
+	pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc);
+	ptep = pte_offset_kernel(pmdp, newsrc);
+	*ptep = src_pte;   /* set_pte() would be confused by this */
+	local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+	/* Actually move the data. */
+	__memcpy_asm((void *)newdst, (const void *)newsrc, len);
+
+	/*
+	 * Remap the source as locally-cached and not OLOC'ed so that
+	 * we can inval without also invaling the remote cpu's cache.
+	 * This also avoids known errata with inv'ing cacheable oloc data.
+	 */
+	src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3);
+	src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */
+	*ptep = src_pte;   /* set_pte() would be confused by this */
+	local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+	/*
+	 * Do the actual invalidation, covering the full L2 cache line
+	 * at the end since __memcpy_asm() is somewhat aggressive.
+	 */
+	__inv_buffer((void *)newsrc, len);
+
+	/*
+	 * We're done: notify the simulator that all is back to normal,
+	 * and re-enable interrupts and pre-emption.
+	 */
+	sim_allow_multiple_caching(0);
+	local_irq_restore(flags);
+	put_cpu();
+}
+
+/*
+ * Identify large copies from remotely-cached memory, and copy them
+ * via memcpy_multicache() if they look good, otherwise fall back
+ * to the particular kind of copying passed as the memcpy_t function.
+ */
+static unsigned long fast_copy(void *dest, const void *source, int len,
+			       memcpy_t func)
+{
+	/*
+	 * Check if it's big enough to bother with.  We may end up doing a
+	 * small copy via TLB manipulation if we're near a page boundary,
+	 * but presumably we'll make it up when we hit the second page.
+	 */
+	while (len >= LARGE_COPY_CUTOFF) {
+		int copy_size, bytes_left_on_page;
+		pte_t *src_ptep, *dst_ptep;
+		pte_t src_pte, dst_pte;
+		struct page *src_page, *dst_page;
+
+		/* Is the source page oloc'ed to a remote cpu? */
+retry_source:
+		src_ptep = virt_to_pte(current->mm, (unsigned long)source);
+		if (src_ptep == NULL)
+			break;
+		src_pte = *src_ptep;
+		if (!hv_pte_get_present(src_pte) ||
+		    !hv_pte_get_readable(src_pte) ||
+		    hv_pte_get_mode(src_pte) != HV_PTE_MODE_CACHE_TILE_L3)
+			break;
+		if (get_remote_cache_cpu(src_pte) == smp_processor_id())
+			break;
+		src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
+		get_page(src_page);
+		if (pte_val(src_pte) != pte_val(*src_ptep)) {
+			put_page(src_page);
+			goto retry_source;
+		}
+		if (pte_huge(src_pte)) {
+			/* Adjust the PTE to correspond to a small page */
+			int pfn = hv_pte_get_pfn(src_pte);
+			pfn += (((unsigned long)source & (HPAGE_SIZE-1))
+				>> PAGE_SHIFT);
+			src_pte = pfn_pte(pfn, src_pte);
+			src_pte = pte_mksmall(src_pte);
+		}
+
+		/* Is the destination page writable? */
+retry_dest:
+		dst_ptep = virt_to_pte(current->mm, (unsigned long)dest);
+		if (dst_ptep == NULL) {
+			put_page(src_page);
+			break;
+		}
+		dst_pte = *dst_ptep;
+		if (!hv_pte_get_present(dst_pte) ||
+		    !hv_pte_get_writable(dst_pte)) {
+			put_page(src_page);
+			break;
+		}
+		dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
+		if (dst_page == src_page) {
+			/*
+			 * Source and dest are on the same page; this
+			 * potentially exposes us to incoherence if any
+			 * part of src and dest overlap on a cache line.
+			 * Just give up rather than trying to be precise.
+			 */
+			put_page(src_page);
+			break;
+		}
+		get_page(dst_page);
+		if (pte_val(dst_pte) != pte_val(*dst_ptep)) {
+			put_page(dst_page);
+			goto retry_dest;
+		}
+		if (pte_huge(dst_pte)) {
+			/* Adjust the PTE to correspond to a small page */
+			int pfn = hv_pte_get_pfn(dst_pte);
+			pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
+				>> PAGE_SHIFT);
+			dst_pte = pfn_pte(pfn, dst_pte);
+			dst_pte = pte_mksmall(dst_pte);
+		}
+
+		/* All looks good: create a cachable PTE and copy from it */
+		copy_size = len;
+		bytes_left_on_page =
+			PAGE_SIZE - (((int)source) & (PAGE_SIZE-1));
+		if (copy_size > bytes_left_on_page)
+			copy_size = bytes_left_on_page;
+		bytes_left_on_page =
+			PAGE_SIZE - (((int)dest) & (PAGE_SIZE-1));
+		if (copy_size > bytes_left_on_page)
+			copy_size = bytes_left_on_page;
+		memcpy_multicache(dest, source, dst_pte, src_pte, copy_size);
+
+		/* Release the pages */
+		put_page(dst_page);
+		put_page(src_page);
+
+		/* Continue on the next page */
+		dest += copy_size;
+		source += copy_size;
+		len -= copy_size;
+	}
+
+	return func(dest, source, len);
+}
+
+void *memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	if (n < LARGE_COPY_CUTOFF)
+		return (void *)__memcpy_asm(to, from, n);
+	else
+		return (void *)fast_copy(to, from, n, __memcpy_asm);
+}
+
+unsigned long __copy_to_user_inatomic(void __user *to, const void *from,
+				      unsigned long n)
+{
+	if (n < LARGE_COPY_CUTOFF)
+		return __copy_to_user_inatomic_asm(to, from, n);
+	else
+		return fast_copy(to, from, n, __copy_to_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_inatomic(void *to, const void __user *from,
+					unsigned long n)
+{
+	if (n < LARGE_COPY_CUTOFF)
+		return __copy_from_user_inatomic_asm(to, from, n);
+	else
+		return fast_copy(to, from, n, __copy_from_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_zeroing(void *to, const void __user *from,
+				       unsigned long n)
+{
+	if (n < LARGE_COPY_CUTOFF)
+		return __copy_from_user_zeroing_asm(to, from, n);
+	else
+		return fast_copy(to, from, n, __copy_from_user_zeroing_asm);
+}
+
+#endif /* !CHIP_HAS_COHERENT_LOCAL_CACHE() */
diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove_32.c
new file mode 100644
index 00000000000..fd615ae6ade
--- /dev/null
+++ b/arch/tile/lib/memmove_32.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+	if ((const char *)src >= (char *)dest + n
+	    || (char *)dest >= (const char *)src + n) {
+		/* We found no overlap, so let memcpy do all the heavy
+		 * lifting (prefetching, etc.)
+		 */
+		return memcpy(dest, src, n);
+	}
+
+	if (n != 0) {
+		const uint8_t *in;
+		uint8_t x;
+		uint8_t *out;
+		int stride;
+
+		if (src < dest) {
+			/* copy backwards */
+			in = (const uint8_t *)src + n - 1;
+			out = (uint8_t *)dest + n - 1;
+			stride = -1;
+		} else {
+			/* copy forwards */
+			in = (const uint8_t *)src;
+			out = (uint8_t *)dest;
+			stride = 1;
+		}
+
+		/* Manually software-pipeline this loop. */
+		x = *in;
+		in += stride;
+
+		while (--n != 0) {
+			*out = x;
+			out += stride;
+			x = *in;
+			in += stride;
+		}
+
+		*out = x;
+	}
+
+	return dest;
+}
+EXPORT_SYMBOL(memmove);
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
new file mode 100644
index 00000000000..bfde5d864df
--- /dev/null
+++ b/arch/tile/lib/memset_32.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <arch/chip.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+
+void *memset(void *s, int c, size_t n)
+{
+	uint32_t *out32;
+	int n32;
+	uint32_t v16, v32;
+	uint8_t *out8 = s;
+#if !CHIP_HAS_WH64()
+	int ahead32;
+#else
+	int to_align32;
+#endif
+
+	/* Experimentation shows that a trivial tight loop is a win up until
+	 * around a size of 20, where writing a word at a time starts to win.
+	 */
+#define BYTE_CUTOFF 20
+
+#if BYTE_CUTOFF < 3
+	/* This must be at least at least this big, or some code later
+	 * on doesn't work.
+	 */
+#error "BYTE_CUTOFF is too small"
+#endif
+
+	if (n < BYTE_CUTOFF) {
+		/* Strangely, this turns out to be the tightest way to
+		 * write this loop.
+		 */
+		if (n != 0) {
+			do {
+				/* Strangely, combining these into one line
+				 * performs worse.
+				 */
+				*out8 = c;
+				out8++;
+			} while (--n != 0);
+		}
+
+		return s;
+	}
+
+#if !CHIP_HAS_WH64()
+	/* Use a spare issue slot to start prefetching the first cache
+	 * line early. This instruction is free as the store can be buried
+	 * in otherwise idle issue slots doing ALU ops.
+	 */
+	__insn_prefetch(out8);
+
+	/* We prefetch the end so that a short memset that spans two cache
+	 * lines gets some prefetching benefit. Again we believe this is free
+	 * to issue.
+	 */
+	__insn_prefetch(&out8[n - 1]);
+#endif /* !CHIP_HAS_WH64() */
+
+
+	/* Align 'out8'. We know n >= 3 so this won't write past the end. */
+	while (((uintptr_t) out8 & 3) != 0) {
+		*out8++ = c;
+		--n;
+	}
+
+	/* Align 'n'. */
+	while (n & 3)
+		out8[--n] = c;
+
+	out32 = (uint32_t *) out8;
+	n32 = n >> 2;
+
+	/* Tile input byte out to 32 bits. */
+	v16 = __insn_intlb(c, c);
+	v32 = __insn_intlh(v16, v16);
+
+	/* This must be at least 8 or the following loop doesn't work. */
+#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4)
+
+#if !CHIP_HAS_WH64()
+
+	ahead32 = CACHE_LINE_SIZE_IN_WORDS;
+
+	/* We already prefetched the first and last cache lines, so
+	 * we only need to do more prefetching if we are storing
+	 * to more than two cache lines.
+	 */
+	if (n32 > CACHE_LINE_SIZE_IN_WORDS * 2) {
+		int i;
+
+		/* Prefetch the next several cache lines.
+		 * This is the setup code for the software-pipelined
+		 * loop below.
+		 */
+#define MAX_PREFETCH 5
+		ahead32 = n32 & -CACHE_LINE_SIZE_IN_WORDS;
+		if (ahead32 > MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS)
+			ahead32 = MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS;
+
+		for (i = CACHE_LINE_SIZE_IN_WORDS;
+		     i < ahead32; i += CACHE_LINE_SIZE_IN_WORDS)
+			__insn_prefetch(&out32[i]);
+	}
+
+	if (n32 > ahead32) {
+		while (1) {
+			int j;
+
+			/* Prefetch by reading one word several cache lines
+			 * ahead.  Since loads are non-blocking this will
+			 * cause the full cache line to be read while we are
+			 * finishing earlier cache lines.  Using a store
+			 * here causes microarchitectural performance
+			 * problems where a victimizing store miss goes to
+			 * the head of the retry FIFO and locks the pipe for
+			 * a few cycles.  So a few subsequent stores in this
+			 * loop go into the retry FIFO, and then later
+			 * stores see other stores to the same cache line
+			 * are already in the retry FIFO and themselves go
+			 * into the retry FIFO, filling it up and grinding
+			 * to a halt waiting for the original miss to be
+			 * satisfied.
+			 */
+			__insn_prefetch(&out32[ahead32]);
+
+#if 1
+#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0
+#error "Unhandled CACHE_LINE_SIZE_IN_WORDS"
+#endif
+
+			n32 -= CACHE_LINE_SIZE_IN_WORDS;
+
+			/* Save icache space by only partially unrolling
+			 * this loop.
+			 */
+			for (j = CACHE_LINE_SIZE_IN_WORDS / 4; j > 0; j--) {
+				*out32++ = v32;
+				*out32++ = v32;
+				*out32++ = v32;
+				*out32++ = v32;
+			}
+#else
+			/* Unfortunately, due to a code generator flaw this
+			 * allocates a separate register for each of these
+			 * stores, which requires a large number of spills,
+			 * which makes this procedure enormously bigger
+			 * (something like 70%)
+			 */
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			*out32++ = v32;
+			n32 -= 16;
+#endif
+
+			/* To save compiled code size, reuse this loop even
+			 * when we run out of prefetching to do by dropping
+			 * ahead32 down.
+			 */
+			if (n32 <= ahead32) {
+				/* Not even a full cache line left,
+				 * so stop now.
+				 */
+				if (n32 < CACHE_LINE_SIZE_IN_WORDS)
+					break;
+
+				/* Choose a small enough value that we don't
+				 * prefetch past the end.  There's no sense
+				 * in touching cache lines we don't have to.
+				 */
+				ahead32 = CACHE_LINE_SIZE_IN_WORDS - 1;
+			}
+		}
+	}
+
+#else /* CHIP_HAS_WH64() */
+
+	/* Determine how many words we need to emit before the 'out32'
+	 * pointer becomes aligned modulo the cache line size.
+	 */
+	to_align32 =
+		(-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1);
+
+	/* Only bother aligning and using wh64 if there is at least
+	 * one full cache line to process.  This check also prevents
+	 * overrunning the end of the buffer with alignment words.
+	 */
+	if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) {
+		int lines_left;
+
+		/* Align out32 mod the cache line size so we can use wh64. */
+		n32 -= to_align32;
+		for (; to_align32 != 0; to_align32--) {
+			*out32 = v32;
+			out32++;
+		}
+
+		/* Use unsigned divide to turn this into a right shift. */
+		lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS;
+
+		do {
+			/* Only wh64 a few lines at a time, so we don't
+			 * exceed the maximum number of victim lines.
+			 */
+			int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS())
+				  ? lines_left
+				  : CHIP_MAX_OUTSTANDING_VICTIMS());
+			uint32_t *wh = out32;
+			int i = x;
+			int j;
+
+			lines_left -= x;
+
+			do {
+				__insn_wh64(wh);
+				wh += CACHE_LINE_SIZE_IN_WORDS;
+			} while (--i);
+
+			for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4);
+			     j != 0; j--) {
+				*out32++ = v32;
+				*out32++ = v32;
+				*out32++ = v32;
+				*out32++ = v32;
+			}
+		} while (lines_left != 0);
+
+		/* We processed all full lines above, so only this many
+		 * words remain to be processed.
+		 */
+		n32 &= CACHE_LINE_SIZE_IN_WORDS - 1;
+	}
+
+#endif /* CHIP_HAS_WH64() */
+
+	/* Now handle any leftover values. */
+	if (n32 != 0) {
+		do {
+			*out32 = v32;
+			out32++;
+		} while (--n32 != 0);
+	}
+
+	return s;
+}
+EXPORT_SYMBOL(memset);
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
new file mode 100644
index 00000000000..485e24d62c6
--- /dev/null
+++ b/arch/tile/lib/spinlock_32.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/processor.h>
+
+#include "spinlock_common.h"
+
+void arch_spin_lock(arch_spinlock_t *lock)
+{
+	int my_ticket;
+	int iterations = 0;
+	int delta;
+
+	while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1)
+		delay_backoff(iterations++);
+
+	/* Increment the next ticket number, implicitly releasing tns lock. */
+	lock->next_ticket = my_ticket + TICKET_QUANTUM;
+
+	/* Wait until it's our turn. */
+	while ((delta = my_ticket - lock->current_ticket) != 0)
+		relax((128 / CYCLES_PER_RELAX_LOOP) * delta);
+}
+EXPORT_SYMBOL(arch_spin_lock);
+
+int arch_spin_trylock(arch_spinlock_t *lock)
+{
+	/*
+	 * Grab a ticket; no need to retry if it's busy, we'll just
+	 * treat that the same as "locked", since someone else
+	 * will lock it momentarily anyway.
+	 */
+	int my_ticket = __insn_tns((void *)&lock->next_ticket);
+
+	if (my_ticket == lock->current_ticket) {
+		/* Not currently locked, so lock it by keeping this ticket. */
+		lock->next_ticket = my_ticket + TICKET_QUANTUM;
+		/* Success! */
+		return 1;
+	}
+
+	if (!(my_ticket & 1)) {
+		/* Release next_ticket. */
+		lock->next_ticket = my_ticket;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(arch_spin_trylock);
+
+void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+	u32 iterations = 0;
+	while (arch_spin_is_locked(lock))
+		delay_backoff(iterations++);
+}
+EXPORT_SYMBOL(arch_spin_unlock_wait);
+
+/*
+ * The low byte is always reserved to be the marker for a "tns" operation
+ * since the low bit is set to "1" by a tns.  The next seven bits are
+ * zeroes.  The next byte holds the "next" writer value, i.e. the ticket
+ * available for the next task that wants to write.  The third byte holds
+ * the current writer value, i.e. the writer who holds the current ticket.
+ * If current == next == 0, there are no interested writers.
+ */
+#define WR_NEXT_SHIFT   _WR_NEXT_SHIFT
+#define WR_CURR_SHIFT   _WR_CURR_SHIFT
+#define WR_WIDTH        _WR_WIDTH
+#define WR_MASK         ((1 << WR_WIDTH) - 1)
+
+/*
+ * The last eight bits hold the active reader count.  This has to be
+ * zero before a writer can start to write.
+ */
+#define RD_COUNT_SHIFT  _RD_COUNT_SHIFT
+#define RD_COUNT_WIDTH  _RD_COUNT_WIDTH
+#define RD_COUNT_MASK   ((1 << RD_COUNT_WIDTH) - 1)
+
+
+/* Lock the word, spinning until there are no tns-ers. */
+static inline u32 get_rwlock(arch_rwlock_t *rwlock)
+{
+	u32 iterations = 0;
+	for (;;) {
+		u32 val = __insn_tns((int *)&rwlock->lock);
+		if (unlikely(val & 1)) {
+			delay_backoff(iterations++);
+			continue;
+		}
+		return val;
+	}
+}
+
+int arch_read_trylock_slow(arch_rwlock_t *rwlock)
+{
+	u32 val = get_rwlock(rwlock);
+	int locked = (val << RD_COUNT_WIDTH) == 0;
+	rwlock->lock = val + (locked << RD_COUNT_SHIFT);
+	return locked;
+}
+EXPORT_SYMBOL(arch_read_trylock_slow);
+
+void arch_read_unlock_slow(arch_rwlock_t *rwlock)
+{
+	u32 val = get_rwlock(rwlock);
+	rwlock->lock = val - (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_unlock_slow);
+
+void arch_write_unlock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+	u32 eq, mask = 1 << WR_CURR_SHIFT;
+	while (unlikely(val & 1)) {
+		/* Limited backoff since we are the highest-priority task. */
+		relax(4);
+		val = __insn_tns((int *)&rwlock->lock);
+	}
+	val = __insn_addb(val, mask);
+	eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT));
+	val = __insn_mz(eq & mask, val);
+	rwlock->lock = val;
+}
+EXPORT_SYMBOL(arch_write_unlock_slow);
+
+/*
+ * We spin until everything but the reader bits (which are in the high
+ * part of the word) are zero, i.e. no active or waiting writers, no tns.
+ *
+ * ISSUE: This approach can permanently starve readers.  A reader who sees
+ * a writer could instead take a ticket lock (just like a writer would),
+ * and atomically enter read mode (with 1 reader) when it gets the ticket.
+ * This way both readers and writers will always make forward progress
+ * in a finite time.
+ */
+void arch_read_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+	u32 iterations = 0;
+	do {
+		if (!(val & 1))
+			rwlock->lock = val;
+		delay_backoff(iterations++);
+		val = __insn_tns((int *)&rwlock->lock);
+	} while ((val << RD_COUNT_WIDTH) != 0);
+	rwlock->lock = val + (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_lock_slow);
+
+void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+	/*
+	 * The trailing underscore on this variable (and curr_ below)
+	 * reminds us that the high bits are garbage; we mask them out
+	 * when we compare them.
+	 */
+	u32 my_ticket_;
+
+	/* Take out the next ticket; this will also stop would-be readers. */
+	if (val & 1)
+		val = get_rwlock(rwlock);
+	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+
+	/* Extract my ticket value from the original word. */
+	my_ticket_ = val >> WR_NEXT_SHIFT;
+
+	/*
+	 * Wait until the "current" field matches our ticket, and
+	 * there are no remaining readers.
+	 */
+	for (;;) {
+		u32 curr_ = val >> WR_CURR_SHIFT;
+		u32 readers = val >> RD_COUNT_SHIFT;
+		u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+		if (likely(delta == 0))
+			break;
+
+		/* Delay based on how many lock-holders are still out there. */
+		relax((256 / CYCLES_PER_RELAX_LOOP) * delta);
+
+		/*
+		 * Get a non-tns value to check; we don't need to tns
+		 * it ourselves.  Since we're not tns'ing, we retry
+		 * more rapidly to get a valid value.
+		 */
+		while ((val = rwlock->lock) & 1)
+			relax(4);
+	}
+}
+EXPORT_SYMBOL(arch_write_lock_slow);
+
+int __tns_atomic_acquire(atomic_t *lock)
+{
+	int ret;
+	u32 iterations = 0;
+
+	BUG_ON(__insn_mfspr(SPR_INTERRUPT_CRITICAL_SECTION));
+	__insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1);
+
+	while ((ret = __insn_tns((void *)&lock->counter)) == 1)
+		delay_backoff(iterations++);
+	return ret;
+}
+
+void __tns_atomic_release(atomic_t *p, int v)
+{
+	p->counter = v;
+	__insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0);
+}
diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h
new file mode 100644
index 00000000000..c1010980913
--- /dev/null
+++ b/arch/tile/lib/spinlock_common.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ * This file is included into spinlock_32.c or _64.c.
+ */
+
+/*
+ * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop
+ * overhead.
+ */
+#ifdef __tilegx__
+#define CYCLES_PER_RELAX_LOOP 7
+#else
+#define CYCLES_PER_RELAX_LOOP 8
+#endif
+
+/*
+ * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles.
+ */
+static inline void
+relax(int iterations)
+{
+	for (/*above*/; iterations > 0; iterations--)
+		__insn_mfspr(SPR_PASS);
+	barrier();
+}
+
+/* Perform bounded exponential backoff.*/
+static void delay_backoff(int iterations)
+{
+	u32 exponent, loops;
+
+	/*
+	 * 2^exponent is how many times we go around the loop,
+	 * which takes 8 cycles.  We want to start with a 16- to 31-cycle
+	 * loop, so we need to go around minimum 2 = 2^1 times, so we
+	 * bias the original value up by 1.
+	 */
+	exponent = iterations + 1;
+
+	/*
+	 * Don't allow exponent to exceed 7, so we have 128 loops,
+	 * or 1,024 (to 2,047) cycles, as our maximum.
+	 */
+	if (exponent > 8)
+		exponent = 8;
+
+	loops = 1 << exponent;
+
+	/* Add a randomness factor so two cpus never get in lock step. */
+	loops += __insn_crc32_32(stack_pointer, get_cycles_low()) &
+		(loops - 1);
+
+	relax(1 << exponent);
+}
diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c
new file mode 100644
index 00000000000..c94e6f7ae7b
--- /dev/null
+++ b/arch/tile/lib/strchr_32.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#undef strchr
+
+char *strchr(const char *s, int c)
+{
+	int z, g;
+
+	/* Get an aligned pointer. */
+	const uintptr_t s_int = (uintptr_t) s;
+	const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+	/* Create four copies of the byte for which we are looking. */
+	const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+	/* Read the first aligned word, but force bytes before the string to
+	 * match neither zero nor goal (we make sure the high bit of each
+	 * byte is 1, and the low 7 bits are all the opposite of the goal
+	 * byte).
+	 *
+	 * Note that this shift count expression works because we know shift
+	 * counts are taken mod 32.
+	 */
+	const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+	uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1));
+
+	uint32_t zero_matches, goal_matches;
+	while (1) {
+		/* Look for a terminating '\0'. */
+		zero_matches = __insn_seqb(v, 0);
+
+		/* Look for the goal byte. */
+		goal_matches = __insn_seqb(v, goal);
+
+		if (__builtin_expect(zero_matches | goal_matches, 0))
+			break;
+
+		v = *++p;
+	}
+
+	z = __insn_ctz(zero_matches);
+	g = __insn_ctz(goal_matches);
+
+	/* If we found c before '\0' we got a match. Note that if c == '\0'
+	 * then g == z, and we correctly return the address of the '\0'
+	 * rather than NULL.
+	 */
+	return (g <= z) ? ((char *)p) + (g >> 3) : NULL;
+}
+EXPORT_SYMBOL(strchr);
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
new file mode 100644
index 00000000000..f26f88e11e4
--- /dev/null
+++ b/arch/tile/lib/strlen_32.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+size_t strlen(const char *s)
+{
+	/* Get an aligned pointer. */
+	const uintptr_t s_int = (uintptr_t) s;
+	const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+	/* Read the first word, but force bytes before the string to be nonzero.
+	 * This expression works because we know shift counts are taken mod 32.
+	 */
+	uint32_t v = *p | ((1 << (s_int << 3)) - 1);
+
+	uint32_t bits;
+	while ((bits = __insn_seqb(v, 0)) == 0)
+		v = *++p;
+
+	return ((const char *)p) + (__insn_ctz(bits) >> 3) - s;
+}
+EXPORT_SYMBOL(strlen);
diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c
new file mode 100644
index 00000000000..f8d398c9ee7
--- /dev/null
+++ b/arch/tile/lib/uaccess.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/module.h>
+
+int __range_ok(unsigned long addr, unsigned long size)
+{
+	unsigned long limit = current_thread_info()->addr_limit.seg;
+	return !((addr < limit && size <= limit - addr) ||
+		 is_arch_mappable_range(addr, size));
+}
+EXPORT_SYMBOL(__range_ok);
+
+#ifdef CONFIG_DEBUG_COPY_FROM_USER
+void copy_from_user_overflow(void)
+{
+       WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
+#endif
diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S
new file mode 100644
index 00000000000..979f76d8374
--- /dev/null
+++ b/arch/tile/lib/usercopy_32.S
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <arch/chip.h>
+
+/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
+
+	.pushsection .fixup,"ax"
+
+get_user_fault:
+	{ move r0, zero; move r1, zero }
+	{ movei r2, -EFAULT; jrp lr }
+	ENDPROC(get_user_fault)
+
+put_user_fault:
+	{ movei r0, -EFAULT; jrp lr }
+	ENDPROC(put_user_fault)
+
+	.popsection
+
+/*
+ * __get_user_N functions take a pointer in r0, and return 0 in r2
+ * on success, with the value in r0; or else -EFAULT in r2.
+ */
+#define __get_user_N(bytes, LOAD) \
+	STD_ENTRY(__get_user_##bytes); \
+1:	{ LOAD r0, r0; move r1, zero; move r2, zero }; \
+	jrp lr; \
+	STD_ENDPROC(__get_user_##bytes); \
+	.pushsection __ex_table,"a"; \
+	.word 1b, get_user_fault; \
+	.popsection
+
+__get_user_N(1, lb_u)
+__get_user_N(2, lh_u)
+__get_user_N(4, lw)
+
+/*
+ * __get_user_8 takes a pointer in r0, and returns 0 in r2
+ * on success, with the value in r0/r1; or else -EFAULT in r2.
+ */
+	STD_ENTRY(__get_user_8);
+1:	{ lw r0, r0; addi r1, r0, 4 };
+2:	{ lw r1, r1; move r2, zero };
+	jrp lr;
+	STD_ENDPROC(__get_user_8);
+	.pushsection __ex_table,"a";
+	.word 1b, get_user_fault;
+	.word 2b, get_user_fault;
+	.popsection
+
+/*
+ * __put_user_N functions take a value in r0 and a pointer in r1,
+ * and return 0 in r0 on success or -EFAULT on failure.
+ */
+#define __put_user_N(bytes, STORE) \
+	STD_ENTRY(__put_user_##bytes); \
+1:	{ STORE r1, r0; move r0, zero }; \
+	jrp lr; \
+	STD_ENDPROC(__put_user_##bytes); \
+	.pushsection __ex_table,"a"; \
+	.word 1b, put_user_fault; \
+	.popsection
+
+__put_user_N(1, sb)
+__put_user_N(2, sh)
+__put_user_N(4, sw)
+
+/*
+ * __put_user_8 takes a value in r0/r1 and a pointer in r2,
+ * and returns 0 in r0 on success or -EFAULT on failure.
+ */
+STD_ENTRY(__put_user_8)
+1:      { sw r2, r0; addi r2, r2, 4 }
+2:      { sw r2, r1; move r0, zero }
+	jrp lr
+	STD_ENDPROC(__put_user_8)
+	.pushsection __ex_table,"a"
+	.word 1b, put_user_fault
+	.word 2b, put_user_fault
+	.popsection
+
+
+/*
+ * strnlen_user_asm takes the pointer in r0, and the length bound in r1.
+ * It returns the length, including the terminating NUL, or zero on exception.
+ * If length is greater than the bound, returns one plus the bound.
+ */
+STD_ENTRY(strnlen_user_asm)
+	{ bz r1, 2f; addi r3, r0, -1 }  /* bias down to include NUL */
+1:      { lb_u r4, r0; addi r1, r1, -1 }
+	bz r4, 2f
+	{ bnzt r1, 1b; addi r0, r0, 1 }
+2:      { sub r0, r0, r3; jrp lr }
+	STD_ENDPROC(strnlen_user_asm)
+	.pushsection .fixup,"ax"
+strnlen_user_fault:
+	{ move r0, zero; jrp lr }
+	ENDPROC(strnlen_user_fault)
+	.section __ex_table,"a"
+	.word 1b, strnlen_user_fault
+	.popsection
+
+/*
+ * strncpy_from_user_asm takes the kernel target pointer in r0,
+ * the userspace source pointer in r1, and the length bound (including
+ * the trailing NUL) in r2.  On success, it returns the string length
+ * (not including the trailing NUL), or -EFAULT on failure.
+ */
+STD_ENTRY(strncpy_from_user_asm)
+	{ bz r2, 2f; move r3, r0 }
+1:      { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
+	{ sb r0, r4; addi r0, r0, 1 }
+	bz r2, 2f
+	bnzt r4, 1b
+	addi r0, r0, -1   /* don't count the trailing NUL */
+2:      { sub r0, r0, r3; jrp lr }
+	STD_ENDPROC(strncpy_from_user_asm)
+	.pushsection .fixup,"ax"
+strncpy_from_user_fault:
+	{ movei r0, -EFAULT; jrp lr }
+	ENDPROC(strncpy_from_user_fault)
+	.section __ex_table,"a"
+	.word 1b, strncpy_from_user_fault
+	.popsection
+
+/*
+ * clear_user_asm takes the user target address in r0 and the
+ * number of bytes to zero in r1.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ * Note that we don't use a separate .fixup section here since we fall
+ * through into the "fixup" code as the last straight-line bundle anyway.
+ */
+STD_ENTRY(clear_user_asm)
+	{ bz r1, 2f; or r2, r0, r1 }
+	andi r2, r2, 3
+	bzt r2, .Lclear_aligned_user_asm
+1:      { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 }
+	bnzt r1, 1b
+2:      { move r0, r1; jrp lr }
+	.pushsection __ex_table,"a"
+	.word 1b, 2b
+	.popsection
+
+.Lclear_aligned_user_asm:
+1:      { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 }
+	bnzt r1, 1b
+2:      { move r0, r1; jrp lr }
+	STD_ENDPROC(clear_user_asm)
+	.pushsection __ex_table,"a"
+	.word 1b, 2b
+	.popsection
+
+/*
+ * flush_user_asm takes the user target address in r0 and the
+ * number of bytes to flush in r1.
+ * It returns the number of unflushable bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(flush_user_asm)
+	bz r1, 2f
+	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+	{ and r0, r0, r2; and r1, r1, r2 }
+	{ sub r1, r1, r0 }
+1:      { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() }
+	{ addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b }
+2:      { move r0, r1; jrp lr }
+	STD_ENDPROC(flush_user_asm)
+	.pushsection __ex_table,"a"
+	.word 1b, 2b
+	.popsection
+
+/*
+ * inv_user_asm takes the user target address in r0 and the
+ * number of bytes to invalidate in r1.
+ * It returns the number of not inv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(inv_user_asm)
+	bz r1, 2f
+	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+	{ and r0, r0, r2; and r1, r1, r2 }
+	{ sub r1, r1, r0 }
+1:      { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
+	{ addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b }
+2:      { move r0, r1; jrp lr }
+	STD_ENDPROC(inv_user_asm)
+	.pushsection __ex_table,"a"
+	.word 1b, 2b
+	.popsection
+
+/*
+ * finv_user_asm takes the user target address in r0 and the
+ * number of bytes to flush-invalidate in r1.
+ * It returns the number of not finv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(finv_user_asm)
+	bz r1, 2f
+	{ movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+	{ sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+	{ and r0, r0, r2; and r1, r1, r2 }
+	{ sub r1, r1, r0 }
+1:      { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() }
+	{ addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b }
+2:      { move r0, r1; jrp lr }
+	STD_ENDPROC(finv_user_asm)
+	.pushsection __ex_table,"a"
+	.word 1b, 2b
+	.popsection
diff --git a/arch/tile/mm/Makefile b/arch/tile/mm/Makefile
new file mode 100644
index 00000000000..e252aeddc17
--- /dev/null
+++ b/arch/tile/mm/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux tile-specific parts of the memory manager.
+#
+
+obj-y	:= init.o pgtable.o fault.o extable.o elf.o \
+	   mmap.o homecache.o migrate_$(BITS).o
+
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/tile/mm/elf.c b/arch/tile/mm/elf.c
new file mode 100644
index 00000000000..55e58e93bfc
--- /dev/null
+++ b/arch/tile/mm/elf.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/binfmts.h>
+#include <linux/compat.h>
+#include <linux/mman.h>
+#include <linux/elf.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+
+/* Notify a running simulator, if any, that an exec just occurred. */
+static void sim_notify_exec(const char *binary_name)
+{
+	unsigned char c;
+	do {
+		c = *binary_name++;
+		__insn_mtspr(SPR_SIM_CONTROL,
+			     (SIM_CONTROL_OS_EXEC
+			      | (c << _SIM_CONTROL_OPERATOR_BITS)));
+
+	} while (c);
+}
+
+static int notify_exec(void)
+{
+	int retval = 0;  /* failure */
+	struct vm_area_struct *vma = current->mm->mmap;
+	while (vma) {
+		if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file)
+			break;
+		vma = vma->vm_next;
+	}
+	if (vma) {
+		char *buf = (char *) __get_free_page(GFP_KERNEL);
+		if (buf) {
+			char *path = d_path(&vma->vm_file->f_path,
+					    buf, PAGE_SIZE);
+			if (!IS_ERR(path)) {
+				sim_notify_exec(path);
+				retval = 1;
+			}
+			free_page((unsigned long)buf);
+		}
+	}
+	return retval;
+}
+
+/* Notify a running simulator, if any, that we loaded an interpreter. */
+static void sim_notify_interp(unsigned long load_addr)
+{
+	size_t i;
+	for (i = 0; i < sizeof(load_addr); i++) {
+		unsigned char c = load_addr >> (i * 8);
+		__insn_mtspr(SPR_SIM_CONTROL,
+			     (SIM_CONTROL_OS_INTERP
+			      | (c << _SIM_CONTROL_OPERATOR_BITS)));
+	}
+}
+
+
+/* Kernel address of page used to map read-only kernel data into userspace. */
+static void *vdso_page;
+
+/* One-entry array used for install_special_mapping. */
+static struct page *vdso_pages[1];
+
+static int __init vdso_setup(void)
+{
+	vdso_page = (void *)get_zeroed_page(GFP_ATOMIC);
+	memcpy(vdso_page, __rt_sigreturn, __rt_sigreturn_end - __rt_sigreturn);
+	vdso_pages[0] = virt_to_page(vdso_page);
+	return 0;
+}
+device_initcall(vdso_setup);
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+	if (vma->vm_private_data == vdso_pages)
+		return "[vdso]";
+#ifndef __tilegx__
+	if (vma->vm_start == MEM_USER_INTRPT)
+		return "[intrpt]";
+#endif
+	return NULL;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int executable_stack)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long vdso_base;
+	int retval = 0;
+
+	/*
+	 * Notify the simulator that an exec just occurred.
+	 * If we can't find the filename of the mapping, just use
+	 * whatever was passed as the linux_binprm filename.
+	 */
+	if (!notify_exec())
+		sim_notify_exec(bprm->filename);
+
+	down_write(&mm->mmap_sem);
+
+	/*
+	 * MAYWRITE to allow gdb to COW and set breakpoints
+	 *
+	 * Make sure the vDSO gets into every core dump.  Dumping its
+	 * contents makes post-mortem fully interpretable later
+	 * without matching up the same kernel and hardware config to
+	 * see what PC values meant.
+	 */
+	vdso_base = VDSO_BASE;
+	retval = install_special_mapping(mm, vdso_base, PAGE_SIZE,
+					 VM_READ|VM_EXEC|
+					 VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+					 VM_ALWAYSDUMP,
+					 vdso_pages);
+
+#ifndef __tilegx__
+	/*
+	 * Set up a user-interrupt mapping here; the user can't
+	 * create one themselves since it is above TASK_SIZE.
+	 * We make it unwritable by default, so the model for adding
+	 * interrupt vectors always involves an mprotect.
+	 */
+	if (!retval) {
+		unsigned long addr = MEM_USER_INTRPT;
+		addr = mmap_region(NULL, addr, INTRPT_SIZE,
+				   MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE,
+				   VM_READ|VM_EXEC|
+				   VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, 0);
+		if (addr > (unsigned long) -PAGE_SIZE)
+			retval = (int) addr;
+	}
+#endif
+
+	up_write(&mm->mmap_sem);
+
+	return retval;
+}
+
+
+void elf_plat_init(struct pt_regs *regs, unsigned long load_addr)
+{
+	/* Zero all registers. */
+	memset(regs, 0, sizeof(*regs));
+
+	/* Report the interpreter's load address. */
+	sim_notify_interp(load_addr);
+}
diff --git a/arch/tile/mm/extable.c b/arch/tile/mm/extable.c
new file mode 100644
index 00000000000..4fb0acb9d15
--- /dev/null
+++ b/arch/tile/mm/extable.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *fixup;
+
+	fixup = search_exception_tables(regs->pc);
+	if (fixup) {
+		regs->pc = fixup->fixup;
+		return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
new file mode 100644
index 00000000000..0011f06b4fe
--- /dev/null
+++ b/arch/tile/mm/fault.c
@@ -0,0 +1,867 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * From i386 code copyright (C) 1995  Linus Torvalds
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>		/* For unblank_screen() */
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/hugetlb.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/traps.h>
+#include <asm/syscalls.h>
+
+#include <arch/interrupts.h>
+
+static noinline void force_sig_info_fault(int si_signo, int si_code,
+	unsigned long address, int fault_num, struct task_struct *tsk)
+{
+	siginfo_t info;
+
+	if (unlikely(tsk->pid < 2)) {
+		panic("Signal %d (code %d) at %#lx sent to %s!",
+		      si_signo, si_code & 0xffff, address,
+		      tsk->pid ? "init" : "the idle task");
+	}
+
+	info.si_signo = si_signo;
+	info.si_errno = 0;
+	info.si_code = si_code;
+	info.si_addr = (void __user *)address;
+	info.si_trapno = fault_num;
+	force_sig_info(si_signo, &info, tsk);
+}
+
+#ifndef __tilegx__
+/*
+ * Synthesize the fault a PL0 process would get by doing a word-load of
+ * an unaligned address or a high kernel address.  Called indirectly
+ * from sys_cmpxchg() in kernel/intvec.S.
+ */
+int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *regs)
+{
+	if (address >= PAGE_OFFSET)
+		force_sig_info_fault(SIGSEGV, SEGV_MAPERR, address,
+				     INT_DTLB_MISS, current);
+	else
+		force_sig_info_fault(SIGBUS, BUS_ADRALN, address,
+				     INT_UNALIGN_DATA, current);
+
+	/*
+	 * Adjust pc to point at the actual instruction, which is unusual
+	 * for syscalls normally, but is appropriate when we are claiming
+	 * that a syscall swint1 caused a page fault or bus error.
+	 */
+	regs->pc -= 8;
+
+	/*
+	 * Mark this as a caller-save interrupt, like a normal page fault,
+	 * so that when we go through the signal handler path we will
+	 * properly restore r0, r1, and r2 for the signal handler arguments.
+	 */
+	regs->flags |= PT_FLAGS_CALLER_SAVES;
+
+	return 0;
+}
+#endif
+
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+	unsigned index = pgd_index(address);
+	pgd_t *pgd_k;
+	pud_t *pud, *pud_k;
+	pmd_t *pmd, *pmd_k;
+
+	pgd += index;
+	pgd_k = init_mm.pgd + index;
+
+	if (!pgd_present(*pgd_k))
+		return NULL;
+
+	pud = pud_offset(pgd, address);
+	pud_k = pud_offset(pgd_k, address);
+	if (!pud_present(*pud_k))
+		return NULL;
+
+	pmd = pmd_offset(pud, address);
+	pmd_k = pmd_offset(pud_k, address);
+	if (!pmd_present(*pmd_k))
+		return NULL;
+	if (!pmd_present(*pmd)) {
+		set_pmd(pmd, *pmd_k);
+		arch_flush_lazy_mmu_mode();
+	} else
+		BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k));
+	return pmd_k;
+}
+
+/*
+ * Handle a fault on the vmalloc or module mapping area
+ */
+static inline int vmalloc_fault(pgd_t *pgd, unsigned long address)
+{
+	pmd_t *pmd_k;
+	pte_t *pte_k;
+
+	/* Make sure we are in vmalloc area */
+	if (!(address >= VMALLOC_START && address < VMALLOC_END))
+		return -1;
+
+	/*
+	 * Synchronize this task's top level page-table
+	 * with the 'reference' page table.
+	 */
+	pmd_k = vmalloc_sync_one(pgd, address);
+	if (!pmd_k)
+		return -1;
+	if (pmd_huge(*pmd_k))
+		return 0;   /* support TILE huge_vmap() API */
+	pte_k = pte_offset_kernel(pmd_k, address);
+	if (!pte_present(*pte_k))
+		return -1;
+	return 0;
+}
+
+/* Wait until this PTE has completed migration. */
+static void wait_for_migration(pte_t *pte)
+{
+	if (pte_migrating(*pte)) {
+		/*
+		 * Wait until the migrater fixes up this pte.
+		 * We scale the loop count by the clock rate so we'll wait for
+		 * a few seconds here.
+		 */
+		int retries = 0;
+		int bound = get_clock_rate();
+		while (pte_migrating(*pte)) {
+			barrier();
+			if (++retries > bound)
+				panic("Hit migrating PTE (%#llx) and"
+				      " page PFN %#lx still migrating",
+				      pte->val, pte_pfn(*pte));
+		}
+	}
+}
+
+/*
+ * It's not generally safe to use "current" to get the page table pointer,
+ * since we might be running an oprofile interrupt in the middle of a
+ * task switch.
+ */
+static pgd_t *get_current_pgd(void)
+{
+	HV_Context ctx = hv_inquire_context();
+	unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT;
+	struct page *pgd_page = pfn_to_page(pgd_pfn);
+	BUG_ON(PageHighMem(pgd_page));   /* oops, HIGHPTE? */
+	return (pgd_t *) __va(ctx.page_table);
+}
+
+/*
+ * We can receive a page fault from a migrating PTE at any time.
+ * Handle it by just waiting until the fault resolves.
+ *
+ * It's also possible to get a migrating kernel PTE that resolves
+ * itself during the downcall from hypervisor to Linux.  We just check
+ * here to see if the PTE seems valid, and if so we retry it.
+ *
+ * NOTE! We MUST NOT take any locks for this case.  We may be in an
+ * interrupt or a critical region, and must do as little as possible.
+ * Similarly, we can't use atomic ops here, since we may be handling a
+ * fault caused by an atomic op access.
+ */
+static int handle_migrating_pte(pgd_t *pgd, int fault_num,
+				unsigned long address,
+				int is_kernel_mode, int write)
+{
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	pte_t pteval;
+
+	if (pgd_addr_invalid(address))
+		return 0;
+
+	pgd += pgd_index(address);
+	pud = pud_offset(pgd, address);
+	if (!pud || !pud_present(*pud))
+		return 0;
+	pmd = pmd_offset(pud, address);
+	if (!pmd || !pmd_present(*pmd))
+		return 0;
+	pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) :
+		pte_offset_kernel(pmd, address);
+	pteval = *pte;
+	if (pte_migrating(pteval)) {
+		wait_for_migration(pte);
+		return 1;
+	}
+
+	if (!is_kernel_mode || !pte_present(pteval))
+		return 0;
+	if (fault_num == INT_ITLB_MISS) {
+		if (pte_exec(pteval))
+			return 1;
+	} else if (write) {
+		if (pte_write(pteval))
+			return 1;
+	} else {
+		if (pte_read(pteval))
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * This routine is responsible for faulting in user pages.
+ * It passes the work off to one of the appropriate routines.
+ * It returns true if the fault was successfully handled.
+ */
+static int handle_page_fault(struct pt_regs *regs,
+			     int fault_num,
+			     int is_page_fault,
+			     unsigned long address,
+			     int write)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct *vma;
+	unsigned long stack_offset;
+	int fault;
+	int si_code;
+	int is_kernel_mode;
+	pgd_t *pgd;
+
+	/* on TILE, protection faults are always writes */
+	if (!is_page_fault)
+		write = 1;
+
+	is_kernel_mode = (EX1_PL(regs->ex1) != USER_PL);
+
+	tsk = validate_current();
+
+	/*
+	 * Check to see if we might be overwriting the stack, and bail
+	 * out if so.  The page fault code is a relatively likely
+	 * place to get trapped in an infinite regress, and once we
+	 * overwrite the whole stack, it becomes very hard to recover.
+	 */
+	stack_offset = stack_pointer & (THREAD_SIZE-1);
+	if (stack_offset < THREAD_SIZE / 8) {
+		pr_alert("Potential stack overrun: sp %#lx\n",
+		       stack_pointer);
+		show_regs(regs);
+		pr_alert("Killing current process %d/%s\n",
+		       tsk->pid, tsk->comm);
+		do_group_exit(SIGKILL);
+	}
+
+	/*
+	 * Early on, we need to check for migrating PTE entries;
+	 * see homecache.c.  If we find a migrating PTE, we wait until
+	 * the backing page claims to be done migrating, then we procede.
+	 * For kernel PTEs, we rewrite the PTE and return and retry.
+	 * Otherwise, we treat the fault like a normal "no PTE" fault,
+	 * rather than trying to patch up the existing PTE.
+	 */
+	pgd = get_current_pgd();
+	if (handle_migrating_pte(pgd, fault_num, address,
+				 is_kernel_mode, write))
+		return 1;
+
+	si_code = SEGV_MAPERR;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * and that the fault was not a protection fault.
+	 */
+	if (unlikely(address >= TASK_SIZE &&
+		     !is_arch_mappable_range(address, 0))) {
+		if (is_kernel_mode && is_page_fault &&
+		    vmalloc_fault(pgd, address) >= 0)
+			return 1;
+		/*
+		 * Don't take the mm semaphore here. If we fixup a prefetch
+		 * fault we could otherwise deadlock.
+		 */
+		mm = NULL;  /* happy compiler */
+		vma = NULL;
+		goto bad_area_nosemaphore;
+	}
+
+	/*
+	 * If we're trying to touch user-space addresses, we must
+	 * be either at PL0, or else with interrupts enabled in the
+	 * kernel, so either way we can re-enable interrupts here.
+	 */
+	local_irq_enable();
+
+	mm = tsk->mm;
+
+	/*
+	 * If we're in an interrupt, have no user context or are running in an
+	 * atomic region then we must not take the fault.
+	 */
+	if (in_atomic() || !mm) {
+		vma = NULL;  /* happy compiler */
+		goto bad_area_nosemaphore;
+	}
+
+	/*
+	 * When running in the kernel we expect faults to occur only to
+	 * addresses in user space.  All other faults represent errors in the
+	 * kernel and should generate an OOPS.  Unfortunately, in the case of an
+	 * erroneous fault occurring in a code path which already holds mmap_sem
+	 * we will deadlock attempting to validate the fault against the
+	 * address space.  Luckily the kernel only validly references user
+	 * space from well defined areas of code, which are listed in the
+	 * exceptions table.
+	 *
+	 * As the vast majority of faults will be valid we will only perform
+	 * the source reference check when there is a possibility of a deadlock.
+	 * Attempt to lock the address space, if we cannot we then validate the
+	 * source.  If this is invalid we can skip the address space check,
+	 * thus avoiding the deadlock.
+	 */
+	if (!down_read_trylock(&mm->mmap_sem)) {
+		if (is_kernel_mode &&
+		    !search_exception_tables(regs->pc)) {
+			vma = NULL;  /* happy compiler */
+			goto bad_area_nosemaphore;
+		}
+		down_read(&mm->mmap_sem);
+	}
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto bad_area;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+	if (regs->sp < PAGE_OFFSET) {
+		/*
+		 * accessing the stack below sp is always a bug.
+		 */
+		if (address < regs->sp)
+			goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+	si_code = SEGV_ACCERR;
+	if (fault_num == INT_ITLB_MISS) {
+		if (!(vma->vm_flags & VM_EXEC))
+			goto bad_area;
+	} else if (write) {
+#ifdef TEST_VERIFY_AREA
+		if (!is_page_fault && regs->cs == KERNEL_CS)
+			pr_err("WP fault at "REGFMT"\n", regs->eip);
+#endif
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else {
+		if (!is_page_fault || !(vma->vm_flags & VM_READ))
+			goto bad_area;
+	}
+
+ survive:
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+	fault = handle_mm_fault(mm, vma, address, write);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	if (fault & VM_FAULT_MAJOR)
+		tsk->maj_flt++;
+	else
+		tsk->min_flt++;
+
+#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+	/*
+	 * If this was an asynchronous fault,
+	 * restart the appropriate engine.
+	 */
+	switch (fault_num) {
+#if CHIP_HAS_TILE_DMA()
+	case INT_DMATLB_MISS:
+	case INT_DMATLB_MISS_DWNCL:
+	case INT_DMATLB_ACCESS:
+	case INT_DMATLB_ACCESS_DWNCL:
+		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+		break;
+#endif
+#if CHIP_HAS_SN_PROC()
+	case INT_SNITLB_MISS:
+	case INT_SNITLB_MISS_DWNCL:
+		__insn_mtspr(SPR_SNCTL,
+			     __insn_mfspr(SPR_SNCTL) &
+			     ~SPR_SNCTL__FRZPROC_MASK);
+		break;
+#endif
+	}
+#endif
+
+	up_read(&mm->mmap_sem);
+	return 1;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+	/* User mode accesses just cause a SIGSEGV */
+	if (!is_kernel_mode) {
+		/*
+		 * It's possible to have interrupts off here.
+		 */
+		local_irq_enable();
+
+		force_sig_info_fault(SIGSEGV, si_code, address,
+				     fault_num, tsk);
+		return 0;
+	}
+
+no_context:
+	/* Are we prepared to handle this kernel fault?  */
+	if (fixup_exception(regs))
+		return 0;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+	bust_spinlocks(1);
+
+	/* FIXME: no lookup_address() yet */
+#ifdef SUPPORT_LOOKUP_ADDRESS
+	if (fault_num == INT_ITLB_MISS) {
+		pte_t *pte = lookup_address(address);
+
+		if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
+			pr_crit("kernel tried to execute"
+			       " non-executable page - exploit attempt?"
+			       " (uid: %d)\n", current->uid);
+	}
+#endif
+	if (address < PAGE_SIZE)
+		pr_alert("Unable to handle kernel NULL pointer dereference\n");
+	else
+		pr_alert("Unable to handle kernel paging request\n");
+	pr_alert(" at virtual address "REGFMT", pc "REGFMT"\n",
+		 address, regs->pc);
+
+	show_regs(regs);
+
+	if (unlikely(tsk->pid < 2)) {
+		panic("Kernel page fault running %s!",
+		      tsk->pid ? "init" : "the idle task");
+	}
+
+	/*
+	 * More FIXME: we should probably copy the i386 here and
+	 * implement a generic die() routine.  Not today.
+	 */
+#ifdef SUPPORT_DIE
+	die("Oops", regs);
+#endif
+	bust_spinlocks(1);
+
+	do_group_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (is_global_init(tsk)) {
+		yield();
+		down_read(&mm->mmap_sem);
+		goto survive;
+	}
+	pr_alert("VM: killing process %s\n", tsk->comm);
+	if (!is_kernel_mode)
+		do_group_exit(SIGKILL);
+	goto no_context;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (is_kernel_mode)
+		goto no_context;
+
+	force_sig_info_fault(SIGBUS, BUS_ADRERR, address, fault_num, tsk);
+	return 0;
+}
+
+#ifndef __tilegx__
+
+/* We must release ICS before panicking or we won't get anywhere. */
+#define ics_panic(fmt, ...) do { \
+	__insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \
+	panic(fmt, __VA_ARGS__); \
+} while (0)
+
+/*
+ * When we take an ITLB or DTLB fault or access violation in the
+ * supervisor while the critical section bit is set, the hypervisor is
+ * reluctant to write new values into the EX_CONTEXT_1_x registers,
+ * since that might indicate we have not yet squirreled the SPR
+ * contents away and can thus safely take a recursive interrupt.
+ * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_1_2.
+ */
+struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
+				      unsigned long address,
+				      unsigned long info)
+{
+	unsigned long pc = info & ~1;
+	int write = info & 1;
+	pgd_t *pgd = get_current_pgd();
+
+	/* Retval is 1 at first since we will handle the fault fully. */
+	struct intvec_state state = {
+		do_page_fault, fault_num, address, write, 1
+	};
+
+	/* Validate that we are plausibly in the right routine. */
+	if ((pc & 0x7) != 0 || pc < PAGE_OFFSET ||
+	    (fault_num != INT_DTLB_MISS &&
+	     fault_num != INT_DTLB_ACCESS)) {
+		unsigned long old_pc = regs->pc;
+		regs->pc = pc;
+		ics_panic("Bad ICS page fault args:"
+			  " old PC %#lx, fault %d/%d at %#lx\n",
+			  old_pc, fault_num, write, address);
+	}
+
+	/* We might be faulting on a vmalloc page, so check that first. */
+	if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0)
+		return state;
+
+	/*
+	 * If we faulted with ICS set in sys_cmpxchg, we are providing
+	 * a user syscall service that should generate a signal on
+	 * fault.  We didn't set up a kernel stack on initial entry to
+	 * sys_cmpxchg, but instead had one set up by the fault, which
+	 * (because sys_cmpxchg never releases ICS) came to us via the
+	 * SYSTEM_SAVE_1_2 mechanism, and thus EX_CONTEXT_1_[01] are
+	 * still referencing the original user code.  We release the
+	 * atomic lock and rewrite pt_regs so that it appears that we
+	 * came from user-space directly, and after we finish the
+	 * fault we'll go back to user space and re-issue the swint.
+	 * This way the backtrace information is correct if we need to
+	 * emit a stack dump at any point while handling this.
+	 *
+	 * Must match register use in sys_cmpxchg().
+	 */
+	if (pc >= (unsigned long) sys_cmpxchg &&
+	    pc < (unsigned long) __sys_cmpxchg_end) {
+#ifdef CONFIG_SMP
+		/* Don't unlock before we could have locked. */
+		if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) {
+			int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
+			__atomic_fault_unlock(lock_ptr);
+		}
+#endif
+		regs->sp = regs->regs[27];
+	}
+
+	/*
+	 * We can also fault in the atomic assembly, in which
+	 * case we use the exception table to do the first-level fixup.
+	 * We may re-fixup again in the real fault handler if it
+	 * turns out the faulting address is just bad, and not,
+	 * for example, migrating.
+	 */
+	else if (pc >= (unsigned long) __start_atomic_asm_code &&
+		   pc < (unsigned long) __end_atomic_asm_code) {
+		const struct exception_table_entry *fixup;
+#ifdef CONFIG_SMP
+		/* Unlock the atomic lock. */
+		int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
+		__atomic_fault_unlock(lock_ptr);
+#endif
+		fixup = search_exception_tables(pc);
+		if (!fixup)
+			ics_panic("ICS atomic fault not in table:"
+				  " PC %#lx, fault %d", pc, fault_num);
+		regs->pc = fixup->fixup;
+		regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0);
+	}
+
+	/*
+	 * NOTE: the one other type of access that might bring us here
+	 * are the memory ops in __tns_atomic_acquire/__tns_atomic_release,
+	 * but we don't have to check specially for them since we can
+	 * always safely return to the address of the fault and retry,
+	 * since no separate atomic locks are involved.
+	 */
+
+	/*
+	 * Now that we have released the atomic lock (if necessary),
+	 * it's safe to spin if the PTE that caused the fault was migrating.
+	 */
+	if (fault_num == INT_DTLB_ACCESS)
+		write = 1;
+	if (handle_migrating_pte(pgd, fault_num, address, 1, write))
+		return state;
+
+	/* Return zero so that we continue on with normal fault handling. */
+	state.retval = 0;
+	return state;
+}
+
+#endif /* !__tilegx__ */
+
+/*
+ * This routine handles page faults.  It determines the address, and the
+ * problem, and then passes it handle_page_fault() for normal DTLB and
+ * ITLB issues, and for DMA or SN processor faults when we are in user
+ * space.  For the latter, if we're in kernel mode, we just save the
+ * interrupt away appropriately and return immediately.  We can't do
+ * page faults for user code while in kernel mode.
+ */
+void do_page_fault(struct pt_regs *regs, int fault_num,
+		   unsigned long address, unsigned long write)
+{
+	int is_page_fault;
+
+	/* This case should have been handled by do_page_fault_ics(). */
+	BUG_ON(write & ~1);
+
+#if CHIP_HAS_TILE_DMA()
+	/*
+	 * If it's a DMA fault, suspend the transfer while we're
+	 * handling the miss; we'll restart after it's handled.  If we
+	 * don't suspend, it's possible that this process could swap
+	 * out and back in, and restart the engine since the DMA is
+	 * still 'running'.
+	 */
+	if (fault_num == INT_DMATLB_MISS ||
+	    fault_num == INT_DMATLB_ACCESS ||
+	    fault_num == INT_DMATLB_MISS_DWNCL ||
+	    fault_num == INT_DMATLB_ACCESS_DWNCL) {
+		__insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
+		while (__insn_mfspr(SPR_DMA_USER_STATUS) &
+		       SPR_DMA_STATUS__BUSY_MASK)
+			;
+	}
+#endif
+
+	/* Validate fault num and decide if this is a first-time page fault. */
+	switch (fault_num) {
+	case INT_ITLB_MISS:
+	case INT_DTLB_MISS:
+#if CHIP_HAS_TILE_DMA()
+	case INT_DMATLB_MISS:
+	case INT_DMATLB_MISS_DWNCL:
+#endif
+#if CHIP_HAS_SN_PROC()
+	case INT_SNITLB_MISS:
+	case INT_SNITLB_MISS_DWNCL:
+#endif
+		is_page_fault = 1;
+		break;
+
+	case INT_DTLB_ACCESS:
+#if CHIP_HAS_TILE_DMA()
+	case INT_DMATLB_ACCESS:
+	case INT_DMATLB_ACCESS_DWNCL:
+#endif
+		is_page_fault = 0;
+		break;
+
+	default:
+		panic("Bad fault number %d in do_page_fault", fault_num);
+	}
+
+	if (EX1_PL(regs->ex1) != USER_PL) {
+		struct async_tlb *async;
+		switch (fault_num) {
+#if CHIP_HAS_TILE_DMA()
+		case INT_DMATLB_MISS:
+		case INT_DMATLB_ACCESS:
+		case INT_DMATLB_MISS_DWNCL:
+		case INT_DMATLB_ACCESS_DWNCL:
+			async = &current->thread.dma_async_tlb;
+			break;
+#endif
+#if CHIP_HAS_SN_PROC()
+		case INT_SNITLB_MISS:
+		case INT_SNITLB_MISS_DWNCL:
+			async = &current->thread.sn_async_tlb;
+			break;
+#endif
+		default:
+			async = NULL;
+		}
+		if (async) {
+
+			/*
+			 * No vmalloc check required, so we can allow
+			 * interrupts immediately at this point.
+			 */
+			local_irq_enable();
+
+			set_thread_flag(TIF_ASYNC_TLB);
+			if (async->fault_num != 0) {
+				panic("Second async fault %d;"
+				      " old fault was %d (%#lx/%ld)",
+				      fault_num, async->fault_num,
+				      address, write);
+			}
+			BUG_ON(fault_num == 0);
+			async->fault_num = fault_num;
+			async->is_fault = is_page_fault;
+			async->is_write = write;
+			async->address = address;
+			return;
+		}
+	}
+
+	handle_page_fault(regs, fault_num, is_page_fault, address, write);
+}
+
+
+#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+/*
+ * Check an async_tlb structure to see if a deferred fault is waiting,
+ * and if so pass it to the page-fault code.
+ */
+static void handle_async_page_fault(struct pt_regs *regs,
+				    struct async_tlb *async)
+{
+	if (async->fault_num) {
+		/*
+		 * Clear async->fault_num before calling the page-fault
+		 * handler so that if we re-interrupt before returning
+		 * from the function we have somewhere to put the
+		 * information from the new interrupt.
+		 */
+		int fault_num = async->fault_num;
+		async->fault_num = 0;
+		handle_page_fault(regs, fault_num, async->is_fault,
+				  async->address, async->is_write);
+	}
+}
+#endif /* CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() */
+
+
+/*
+ * This routine effectively re-issues asynchronous page faults
+ * when we are returning to user space.
+ */
+void do_async_page_fault(struct pt_regs *regs)
+{
+	/*
+	 * Clear thread flag early.  If we re-interrupt while processing
+	 * code here, we will reset it and recall this routine before
+	 * returning to user space.
+	 */
+	clear_thread_flag(TIF_ASYNC_TLB);
+
+#if CHIP_HAS_TILE_DMA()
+	handle_async_page_fault(regs, &current->thread.dma_async_tlb);
+#endif
+#if CHIP_HAS_SN_PROC()
+	handle_async_page_fault(regs, &current->thread.sn_async_tlb);
+#endif
+}
+
+void vmalloc_sync_all(void)
+{
+#ifdef __tilegx__
+	/* Currently all L1 kernel pmd's are static and shared. */
+	BUG_ON(pgd_index(VMALLOC_END) != pgd_index(VMALLOC_START));
+#else
+	/*
+	 * Note that races in the updates of insync and start aren't
+	 * problematic: insync can only get set bits added, and updates to
+	 * start are only improving performance (without affecting correctness
+	 * if undone).
+	 */
+	static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+	static unsigned long start = PAGE_OFFSET;
+	unsigned long address;
+
+	BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK);
+	for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) {
+		if (!test_bit(pgd_index(address), insync)) {
+			unsigned long flags;
+			struct list_head *pos;
+
+			spin_lock_irqsave(&pgd_lock, flags);
+			list_for_each(pos, &pgd_list)
+				if (!vmalloc_sync_one(list_to_pgd(pos),
+								address)) {
+					/* Must be at first entry in list. */
+					BUG_ON(pos != pgd_list.next);
+					break;
+				}
+			spin_unlock_irqrestore(&pgd_lock, flags);
+			if (pos != pgd_list.next)
+				set_bit(pgd_index(address), insync);
+		}
+		if (address == start && test_bit(pgd_index(address), insync))
+			start = address + PGDIR_SIZE;
+	}
+#endif
+}
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
new file mode 100644
index 00000000000..ff1cdff5114
--- /dev/null
+++ b/arch/tile/mm/highmem.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <asm/homecache.h>
+
+#define kmap_get_pte(vaddr) \
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)),\
+		(vaddr)), (vaddr))
+
+
+void *kmap(struct page *page)
+{
+	void *kva;
+	unsigned long flags;
+	pte_t *ptep;
+
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	kva = kmap_high(page);
+
+	/*
+	 * Rewrite the PTE under the lock.  This ensures that the page
+	 * is not currently migrating.
+	 */
+	ptep = kmap_get_pte((unsigned long)kva);
+	flags = homecache_kpte_lock();
+	set_pte_at(&init_mm, kva, ptep, mk_pte(page, page_to_kpgprot(page)));
+	homecache_kpte_unlock(flags);
+
+	return kva;
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+	if (in_interrupt())
+		BUG();
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+static void debug_kmap_atomic_prot(enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	static unsigned warn_count = 10;
+
+	if (unlikely(warn_count == 0))
+		return;
+
+	if (unlikely(in_interrupt())) {
+		if (in_irq()) {
+			if (type != KM_IRQ0 && type != KM_IRQ1 &&
+			    type != KM_BIO_SRC_IRQ &&
+			    /* type != KM_BIO_DST_IRQ && */
+			    type != KM_BOUNCE_READ) {
+				WARN_ON(1);
+				warn_count--;
+			}
+		} else if (!irqs_disabled()) {	/* softirq */
+			if (type != KM_IRQ0 && type != KM_IRQ1 &&
+			    type != KM_SOFTIRQ0 && type != KM_SOFTIRQ1 &&
+			    type != KM_SKB_SUNRPC_DATA &&
+			    type != KM_SKB_DATA_SOFTIRQ &&
+			    type != KM_BOUNCE_READ) {
+				WARN_ON(1);
+				warn_count--;
+			}
+		}
+	}
+
+	if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ ||
+	    type == KM_BIO_SRC_IRQ /* || type == KM_BIO_DST_IRQ */) {
+		if (!irqs_disabled()) {
+			WARN_ON(1);
+			warn_count--;
+		}
+	} else if (type == KM_SOFTIRQ0 || type == KM_SOFTIRQ1) {
+		if (irq_count() == 0 && !irqs_disabled()) {
+			WARN_ON(1);
+			warn_count--;
+		}
+	}
+#endif
+}
+
+/*
+ * Describe a single atomic mapping of a page on a given cpu at a
+ * given address, and allow it to be linked into a list.
+ */
+struct atomic_mapped_page {
+	struct list_head list;
+	struct page *page;
+	int cpu;
+	unsigned long va;
+};
+
+static spinlock_t amp_lock = __SPIN_LOCK_UNLOCKED(&amp_lock);
+static struct list_head amp_list = LIST_HEAD_INIT(amp_list);
+
+/*
+ * Combining this structure with a per-cpu declaration lets us give
+ * each cpu an atomic_mapped_page structure per type.
+ */
+struct kmap_amps {
+	struct atomic_mapped_page per_type[KM_TYPE_NR];
+};
+static DEFINE_PER_CPU(struct kmap_amps, amps);
+
+/*
+ * Add a page and va, on this cpu, to the list of kmap_atomic pages,
+ * and write the new pte to memory.  Writing the new PTE under the
+ * lock guarantees that it is either on the list before migration starts
+ * (if we won the race), or set_pte() sets the migrating bit in the PTE
+ * (if we lost the race).  And doing it under the lock guarantees
+ * that when kmap_atomic_fix_one_pte() comes along, it finds a valid
+ * PTE in memory, iff the mapping is still on the amp_list.
+ *
+ * Finally, doing it under the lock lets us safely examine the page
+ * to see if it is immutable or not, for the generic kmap_atomic() case.
+ * If we examine it earlier we are exposed to a race where it looks
+ * writable earlier, but becomes immutable before we write the PTE.
+ */
+static void kmap_atomic_register(struct page *page, enum km_type type,
+				 unsigned long va, pte_t *ptep, pte_t pteval)
+{
+	unsigned long flags;
+	struct atomic_mapped_page *amp;
+
+	flags = homecache_kpte_lock();
+	spin_lock(&amp_lock);
+
+	/* With interrupts disabled, now fill in the per-cpu info. */
+	amp = &__get_cpu_var(amps).per_type[type];
+	amp->page = page;
+	amp->cpu = smp_processor_id();
+	amp->va = va;
+
+	/* For generic kmap_atomic(), choose the PTE writability now. */
+	if (!pte_read(pteval))
+		pteval = mk_pte(page, page_to_kpgprot(page));
+
+	list_add(&amp->list, &amp_list);
+	set_pte(ptep, pteval);
+	arch_flush_lazy_mmu_mode();
+
+	spin_unlock(&amp_lock);
+	homecache_kpte_unlock(flags);
+}
+
+/*
+ * Remove a page and va, on this cpu, from the list of kmap_atomic pages.
+ * Linear-time search, but we count on the lists being short.
+ * We don't need to adjust the PTE under the lock (as opposed to the
+ * kmap_atomic_register() case), since we're just unconditionally
+ * zeroing the PTE after it's off the list.
+ */
+static void kmap_atomic_unregister(struct page *page, unsigned long va)
+{
+	unsigned long flags;
+	struct atomic_mapped_page *amp;
+	int cpu = smp_processor_id();
+	spin_lock_irqsave(&amp_lock, flags);
+	list_for_each_entry(amp, &amp_list, list) {
+		if (amp->page == page && amp->cpu == cpu && amp->va == va)
+			break;
+	}
+	BUG_ON(&amp->list == &amp_list);
+	list_del(&amp->list);
+	spin_unlock_irqrestore(&amp_lock, flags);
+}
+
+/* Helper routine for kmap_atomic_fix_kpte(), below. */
+static void kmap_atomic_fix_one_kpte(struct atomic_mapped_page *amp,
+				     int finished)
+{
+	pte_t *ptep = kmap_get_pte(amp->va);
+	if (!finished) {
+		set_pte(ptep, pte_mkmigrate(*ptep));
+		flush_remote(0, 0, NULL, amp->va, PAGE_SIZE, PAGE_SIZE,
+			     cpumask_of(amp->cpu), NULL, 0);
+	} else {
+		/*
+		 * Rewrite a default kernel PTE for this page.
+		 * We rely on the fact that set_pte() writes the
+		 * present+migrating bits last.
+		 */
+		pte_t pte = mk_pte(amp->page, page_to_kpgprot(amp->page));
+		set_pte(ptep, pte);
+	}
+}
+
+/*
+ * This routine is a helper function for homecache_fix_kpte(); see
+ * its comments for more information on the "finished" argument here.
+ *
+ * Note that we hold the lock while doing the remote flushes, which
+ * will stall any unrelated cpus trying to do kmap_atomic operations.
+ * We could just update the PTEs under the lock, and save away copies
+ * of the structs (or just the va+cpu), then flush them after we
+ * release the lock, but it seems easier just to do it all under the lock.
+ */
+void kmap_atomic_fix_kpte(struct page *page, int finished)
+{
+	struct atomic_mapped_page *amp;
+	unsigned long flags;
+	spin_lock_irqsave(&amp_lock, flags);
+	list_for_each_entry(amp, &amp_list, list) {
+		if (amp->page == page)
+			kmap_atomic_fix_one_kpte(amp, finished);
+	}
+	spin_unlock_irqrestore(&amp_lock, flags);
+}
+
+/*
+ * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap
+ * because the kmap code must perform a global TLB invalidation when
+ * the kmap pool wraps.
+ *
+ * Note that they may be slower than on x86 (etc.) because unlike on
+ * those platforms, we do have to take a global lock to map and unmap
+ * pages on Tile (see above).
+ *
+ * When holding an atomic kmap is is not legal to sleep, so atomic
+ * kmaps are appropriate for short, tight code paths only.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+	pte_t *pte;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+
+	/* Avoid icache flushes by disallowing atomic executable mappings. */
+	BUG_ON(pte_exec(prot));
+
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	debug_kmap_atomic_prot(type);
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+	pte = kmap_get_pte(vaddr);
+	BUG_ON(!pte_none(*pte));
+
+	/* Register that this page is mapped atomically on this cpu. */
+	kmap_atomic_register(page, type, vaddr, pte, mk_pte(page, prot));
+
+	return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+	/* PAGE_NONE is a magic value that tells us to check immutability. */
+	return kmap_atomic_prot(page, type, PAGE_NONE);
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	/*
+	 * Force other mappings to Oops if they try to access this pte without
+	 * first remapping it.  Keeping stale mappings around is a bad idea.
+	 */
+	if (vaddr == __fix_to_virt(FIX_KMAP_BEGIN+idx)) {
+		pte_t *pte = kmap_get_pte(vaddr);
+		pte_t pteval = *pte;
+		BUG_ON(!pte_present(pteval) && !pte_migrating(pteval));
+		kmap_atomic_unregister(pte_page(pteval), vaddr);
+		kpte_clear_flush(pte, vaddr);
+	} else {
+		/* Must be a lowmem page */
+		BUG_ON(vaddr < PAGE_OFFSET);
+		BUG_ON(vaddr >= (unsigned long)high_memory);
+	}
+
+	arch_flush_lazy_mmu_mode();
+	pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+/*
+ * This API is supposed to allow us to map memory without a "struct page".
+ * Currently we don't support this, though this may change in the future.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+	return kmap_atomic(pfn_to_page(pfn), type);
+}
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
+{
+	return kmap_atomic_prot(pfn_to_page(pfn), type, prot);
+}
+
+struct page *kmap_atomic_to_page(void *ptr)
+{
+	pte_t *pte;
+	unsigned long vaddr = (unsigned long)ptr;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	pte = kmap_get_pte(vaddr);
+	return pte_page(*pte);
+}
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
new file mode 100644
index 00000000000..97c478e7be2
--- /dev/null
+++ b/arch/tile/mm/homecache.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This code maintains the "home" for each page in the system.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/bootmem.h>
+#include <linux/rmap.h>
+#include <linux/pagemap.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/pagevec.h>
+#include <linux/ptrace.h>
+#include <linux/timex.h>
+#include <linux/cache.h>
+#include <linux/smp.h>
+
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+#include <asm/homecache.h>
+
+#include "migrate.h"
+
+
+#if CHIP_HAS_COHERENT_LOCAL_CACHE()
+
+/*
+ * The noallocl2 option suppresses all use of the L2 cache to cache
+ * locally from a remote home.  There's no point in using it if we
+ * don't have coherent local caching, though.
+ */
+static int __write_once noallocl2;
+static int __init set_noallocl2(char *str)
+{
+	noallocl2 = 1;
+	return 0;
+}
+early_param("noallocl2", set_noallocl2);
+
+#else
+
+#define noallocl2 0
+
+#endif
+
+/* Provide no-op versions of these routines to keep flush_remote() cleaner. */
+#define mark_caches_evicted_start() 0
+#define mark_caches_evicted_finish(mask, timestamp) do {} while (0)
+
+
+/*
+ * Update the irq_stat for cpus that we are going to interrupt
+ * with TLB or cache flushes.  Also handle removing dataplane cpus
+ * from the TLB flush set, and setting dataplane_tlb_state instead.
+ */
+static void hv_flush_update(const struct cpumask *cache_cpumask,
+			    struct cpumask *tlb_cpumask,
+			    unsigned long tlb_va, unsigned long tlb_length,
+			    HV_Remote_ASID *asids, int asidcount)
+{
+	struct cpumask mask;
+	int i, cpu;
+
+	cpumask_clear(&mask);
+	if (cache_cpumask)
+		cpumask_or(&mask, &mask, cache_cpumask);
+	if (tlb_cpumask && tlb_length) {
+		cpumask_or(&mask, &mask, tlb_cpumask);
+	}
+
+	for (i = 0; i < asidcount; ++i)
+		cpumask_set_cpu(asids[i].y * smp_width + asids[i].x, &mask);
+
+	/*
+	 * Don't bother to update atomically; losing a count
+	 * here is not that critical.
+	 */
+	for_each_cpu(cpu, &mask)
+		++per_cpu(irq_stat, cpu).irq_hv_flush_count;
+}
+
+/*
+ * This wrapper function around hv_flush_remote() does several things:
+ *
+ *  - Provides a return value error-checking panic path, since
+ *    there's never any good reason for hv_flush_remote() to fail.
+ *  - Accepts a 32-bit PFN rather than a 64-bit PA, which generally
+ *    is the type that Linux wants to pass around anyway.
+ *  - Centralizes the mark_caches_evicted() handling.
+ *  - Canonicalizes that lengths of zero make cpumasks NULL.
+ *  - Handles deferring TLB flushes for dataplane tiles.
+ *  - Tracks remote interrupts in the per-cpu irq_cpustat_t.
+ *
+ * Note that we have to wait until the cache flush completes before
+ * updating the per-cpu last_cache_flush word, since otherwise another
+ * concurrent flush can race, conclude the flush has already
+ * completed, and start to use the page while it's still dirty
+ * remotely (running concurrently with the actual evict, presumably).
+ */
+void flush_remote(unsigned long cache_pfn, unsigned long cache_control,
+		  const struct cpumask *cache_cpumask_orig,
+		  HV_VirtAddr tlb_va, unsigned long tlb_length,
+		  unsigned long tlb_pgsize,
+		  const struct cpumask *tlb_cpumask_orig,
+		  HV_Remote_ASID *asids, int asidcount)
+{
+	int rc;
+	int timestamp = 0;  /* happy compiler */
+	struct cpumask cache_cpumask_copy, tlb_cpumask_copy;
+	struct cpumask *cache_cpumask, *tlb_cpumask;
+	HV_PhysAddr cache_pa;
+	char cache_buf[NR_CPUS*5], tlb_buf[NR_CPUS*5];
+
+	mb();   /* provided just to simplify "magic hypervisor" mode */
+
+	/*
+	 * Canonicalize and copy the cpumasks.
+	 */
+	if (cache_cpumask_orig && cache_control) {
+		cpumask_copy(&cache_cpumask_copy, cache_cpumask_orig);
+		cache_cpumask = &cache_cpumask_copy;
+	} else {
+		cpumask_clear(&cache_cpumask_copy);
+		cache_cpumask = NULL;
+	}
+	if (cache_cpumask == NULL)
+		cache_control = 0;
+	if (tlb_cpumask_orig && tlb_length) {
+		cpumask_copy(&tlb_cpumask_copy, tlb_cpumask_orig);
+		tlb_cpumask = &tlb_cpumask_copy;
+	} else {
+		cpumask_clear(&tlb_cpumask_copy);
+		tlb_cpumask = NULL;
+	}
+
+	hv_flush_update(cache_cpumask, tlb_cpumask, tlb_va, tlb_length,
+			asids, asidcount);
+	cache_pa = (HV_PhysAddr)cache_pfn << PAGE_SHIFT;
+	if (cache_control & HV_FLUSH_EVICT_L2)
+		timestamp = mark_caches_evicted_start();
+	rc = hv_flush_remote(cache_pa, cache_control,
+			     cpumask_bits(cache_cpumask),
+			     tlb_va, tlb_length, tlb_pgsize,
+			     cpumask_bits(tlb_cpumask),
+			     asids, asidcount);
+	if (cache_control & HV_FLUSH_EVICT_L2)
+		mark_caches_evicted_finish(cache_cpumask, timestamp);
+	if (rc == 0)
+		return;
+	cpumask_scnprintf(cache_buf, sizeof(cache_buf), &cache_cpumask_copy);
+	cpumask_scnprintf(tlb_buf, sizeof(tlb_buf), &tlb_cpumask_copy);
+
+	pr_err("hv_flush_remote(%#llx, %#lx, %p [%s],"
+	       " %#lx, %#lx, %#lx, %p [%s], %p, %d) = %d\n",
+	       cache_pa, cache_control, cache_cpumask, cache_buf,
+	       (unsigned long)tlb_va, tlb_length, tlb_pgsize,
+	       tlb_cpumask, tlb_buf,
+	       asids, asidcount, rc);
+	panic("Unsafe to continue.");
+}
+
+void homecache_evict(const struct cpumask *mask)
+{
+	flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0);
+}
+
+/* Return a mask of the cpus whose caches currently own these pages. */
+static void homecache_mask(struct page *page, int pages,
+			   struct cpumask *home_mask)
+{
+	int i;
+	cpumask_clear(home_mask);
+	for (i = 0; i < pages; ++i) {
+		int home = page_home(&page[i]);
+		if (home == PAGE_HOME_IMMUTABLE ||
+		    home == PAGE_HOME_INCOHERENT) {
+			cpumask_copy(home_mask, cpu_possible_mask);
+			return;
+		}
+#if CHIP_HAS_CBOX_HOME_MAP()
+		if (home == PAGE_HOME_HASH) {
+			cpumask_or(home_mask, home_mask, &hash_for_home_map);
+			continue;
+		}
+#endif
+		if (home == PAGE_HOME_UNCACHED)
+			continue;
+		BUG_ON(home < 0 || home >= NR_CPUS);
+		cpumask_set_cpu(home, home_mask);
+	}
+}
+
+/*
+ * Return the passed length, or zero if it's long enough that we
+ * believe we should evict the whole L2 cache.
+ */
+static unsigned long cache_flush_length(unsigned long length)
+{
+	return (length >= CHIP_L2_CACHE_SIZE()) ? HV_FLUSH_EVICT_L2 : length;
+}
+
+/* On the simulator, confirm lines have been evicted everywhere. */
+static void validate_lines_evicted(unsigned long pfn, size_t length)
+{
+	sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED,
+		    (HV_PhysAddr)pfn << PAGE_SHIFT, length);
+}
+
+/* Flush a page out of whatever cache(s) it is in. */
+void homecache_flush_cache(struct page *page, int order)
+{
+	int pages = 1 << order;
+	int length = cache_flush_length(pages * PAGE_SIZE);
+	unsigned long pfn = page_to_pfn(page);
+	struct cpumask home_mask;
+
+	homecache_mask(page, pages, &home_mask);
+	flush_remote(pfn, length, &home_mask, 0, 0, 0, NULL, NULL, 0);
+	validate_lines_evicted(pfn, pages * PAGE_SIZE);
+}
+
+
+/* Report the home corresponding to a given PTE. */
+static int pte_to_home(pte_t pte)
+{
+	if (hv_pte_get_nc(pte))
+		return PAGE_HOME_IMMUTABLE;
+	switch (hv_pte_get_mode(pte)) {
+	case HV_PTE_MODE_CACHE_TILE_L3:
+		return get_remote_cache_cpu(pte);
+	case HV_PTE_MODE_CACHE_NO_L3:
+		return PAGE_HOME_INCOHERENT;
+	case HV_PTE_MODE_UNCACHED:
+		return PAGE_HOME_UNCACHED;
+#if CHIP_HAS_CBOX_HOME_MAP()
+	case HV_PTE_MODE_CACHE_HASH_L3:
+		return PAGE_HOME_HASH;
+#endif
+	}
+	panic("Bad PTE %#llx\n", pte.val);
+}
+
+/* Update the home of a PTE if necessary (can also be used for a pgprot_t). */
+pte_t pte_set_home(pte_t pte, int home)
+{
+	/* Check for non-linear file mapping "PTEs" and pass them through. */
+	if (pte_file(pte))
+		return pte;
+
+#if CHIP_HAS_MMIO()
+	/* Check for MMIO mappings and pass them through. */
+	if (hv_pte_get_mode(pte) == HV_PTE_MODE_MMIO)
+		return pte;
+#endif
+
+
+	/*
+	 * Only immutable pages get NC mappings.  If we have a
+	 * non-coherent PTE, but the underlying page is not
+	 * immutable, it's likely the result of a forced
+	 * caching setting running up against ptrace setting
+	 * the page to be writable underneath.  In this case,
+	 * just keep the PTE coherent.
+	 */
+	if (hv_pte_get_nc(pte) && home != PAGE_HOME_IMMUTABLE) {
+		pte = hv_pte_clear_nc(pte);
+		pr_err("non-immutable page incoherently referenced: %#llx\n",
+		       pte.val);
+	}
+
+	switch (home) {
+
+	case PAGE_HOME_UNCACHED:
+		pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED);
+		break;
+
+	case PAGE_HOME_INCOHERENT:
+		pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+		break;
+
+	case PAGE_HOME_IMMUTABLE:
+		/*
+		 * We could home this page anywhere, since it's immutable,
+		 * but by default just home it to follow "hash_default".
+		 */
+		BUG_ON(hv_pte_get_writable(pte));
+		if (pte_get_forcecache(pte)) {
+			/* Upgrade "force any cpu" to "No L3" for immutable. */
+			if (hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_TILE_L3
+			    && pte_get_anyhome(pte)) {
+				pte = hv_pte_set_mode(pte,
+						      HV_PTE_MODE_CACHE_NO_L3);
+			}
+		} else
+#if CHIP_HAS_CBOX_HOME_MAP()
+		if (hash_default)
+			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
+		else
+#endif
+			pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+		pte = hv_pte_set_nc(pte);
+		break;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	case PAGE_HOME_HASH:
+		pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
+		break;
+#endif
+
+	default:
+		BUG_ON(home < 0 || home >= NR_CPUS ||
+		       !cpu_is_valid_lotar(home));
+		pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
+		pte = set_remote_cache_cpu(pte, home);
+		break;
+	}
+
+#if CHIP_HAS_NC_AND_NOALLOC_BITS()
+	if (noallocl2)
+		pte = hv_pte_set_no_alloc_l2(pte);
+
+	/* Simplify "no local and no l3" to "uncached" */
+	if (hv_pte_get_no_alloc_l2(pte) && hv_pte_get_no_alloc_l1(pte) &&
+	    hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_NO_L3) {
+		pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED);
+	}
+#endif
+
+	/* Checking this case here gives a better panic than from the hv. */
+	BUG_ON(hv_pte_get_mode(pte) == 0);
+
+	return pte;
+}
+
+/*
+ * The routines in this section are the "static" versions of the normal
+ * dynamic homecaching routines; they just set the home cache
+ * of a kernel page once, and require a full-chip cache/TLB flush,
+ * so they're not suitable for anything but infrequent use.
+ */
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+static inline int initial_page_home(void) { return PAGE_HOME_HASH; }
+#else
+static inline int initial_page_home(void) { return 0; }
+#endif
+
+int page_home(struct page *page)
+{
+	if (PageHighMem(page)) {
+		return initial_page_home();
+	} else {
+		unsigned long kva = (unsigned long)page_address(page);
+		return pte_to_home(*virt_to_pte(NULL, kva));
+	}
+}
+
+void homecache_change_page_home(struct page *page, int order, int home)
+{
+	int i, pages = (1 << order);
+	unsigned long kva;
+
+	BUG_ON(PageHighMem(page));
+	BUG_ON(page_count(page) > 1);
+	BUG_ON(page_mapcount(page) != 0);
+	kva = (unsigned long) page_address(page);
+	flush_remote(0, HV_FLUSH_EVICT_L2, &cpu_cacheable_map,
+		     kva, pages * PAGE_SIZE, PAGE_SIZE, cpu_online_mask,
+		     NULL, 0);
+
+	for (i = 0; i < pages; ++i, kva += PAGE_SIZE) {
+		pte_t *ptep = virt_to_pte(NULL, kva);
+		pte_t pteval = *ptep;
+		BUG_ON(!pte_present(pteval) || pte_huge(pteval));
+		*ptep = pte_set_home(pteval, home);
+	}
+}
+
+struct page *homecache_alloc_pages(gfp_t gfp_mask,
+				   unsigned int order, int home)
+{
+	struct page *page;
+	BUG_ON(gfp_mask & __GFP_HIGHMEM);   /* must be lowmem */
+	page = alloc_pages(gfp_mask, order);
+	if (page)
+		homecache_change_page_home(page, order, home);
+	return page;
+}
+
+struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
+					unsigned int order, int home)
+{
+	struct page *page;
+	BUG_ON(gfp_mask & __GFP_HIGHMEM);   /* must be lowmem */
+	page = alloc_pages_node(nid, gfp_mask, order);
+	if (page)
+		homecache_change_page_home(page, order, home);
+	return page;
+}
+
+void homecache_free_pages(unsigned long addr, unsigned int order)
+{
+	struct page *page;
+
+	if (addr == 0)
+		return;
+
+	VM_BUG_ON(!virt_addr_valid((void *)addr));
+	page = virt_to_page((void *)addr);
+	if (put_page_testzero(page)) {
+		int pages = (1 << order);
+		homecache_change_page_home(page, order, initial_page_home());
+		while (pages--)
+			__free_page(page++);
+	}
+}
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
new file mode 100644
index 00000000000..24688b697a8
--- /dev/null
+++ b/arch/tile/mm/hugetlbpage.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * TILE Huge TLB Page Support for Kernel.
+ * Taken from i386 hugetlb implementation:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/smp_lock.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sysctl.h>
+#include <linux/mman.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+		      unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pte_t *pte = NULL;
+
+	/* We do not yet support multiple huge page sizes. */
+	BUG_ON(sz != PMD_SIZE);
+
+	pgd = pgd_offset(mm, addr);
+	pud = pud_alloc(mm, pgd, addr);
+	if (pud)
+		pte = (pte_t *) pmd_alloc(mm, pud, addr);
+	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
+
+	return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd = NULL;
+
+	pgd = pgd_offset(mm, addr);
+	if (pgd_present(*pgd)) {
+		pud = pud_offset(pgd, addr);
+		if (pud_present(*pud))
+			pmd = pmd_offset(pud, addr);
+	}
+	return (pte_t *) pmd;
+}
+
+#ifdef HUGETLB_TEST
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+			      int write)
+{
+	unsigned long start = address;
+	int length = 1;
+	int nr;
+	struct page *page;
+	struct vm_area_struct *vma;
+
+	vma = find_vma(mm, addr);
+	if (!vma || !is_vm_hugetlb_page(vma))
+		return ERR_PTR(-EINVAL);
+
+	pte = huge_pte_offset(mm, address);
+
+	/* hugetlb should be locked, and hence, prefaulted */
+	WARN_ON(!pte || pte_none(*pte));
+
+	page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
+
+	WARN_ON(!PageHead(page));
+
+	return page;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+			     pmd_t *pmd, int write)
+{
+	return NULL;
+}
+
+#else
+
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+			      int write)
+{
+	return ERR_PTR(-EINVAL);
+}
+
+int pmd_huge(pmd_t pmd)
+{
+	return !!(pmd_val(pmd) & _PAGE_HUGE_PAGE);
+}
+
+int pud_huge(pud_t pud)
+{
+	return !!(pud_val(pud) & _PAGE_HUGE_PAGE);
+}
+
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+			     pmd_t *pmd, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pmd);
+	if (page)
+		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
+struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
+			     pud_t *pud, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pud);
+	if (page)
+		page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
+int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
+{
+	return 0;
+}
+
+#endif
+
+#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
+		unsigned long addr, unsigned long len,
+		unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	unsigned long start_addr;
+
+	if (len > mm->cached_hole_size) {
+		start_addr = mm->free_area_cache;
+	} else {
+		start_addr = TASK_UNMAPPED_BASE;
+		mm->cached_hole_size = 0;
+	}
+
+full_search:
+	addr = ALIGN(start_addr, huge_page_size(h));
+
+	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
+		/* At this point:  (!vma || addr < vma->vm_end). */
+		if (TASK_SIZE - len < addr) {
+			/*
+			 * Start a new search - just in case we missed
+			 * some holes.
+			 */
+			if (start_addr != TASK_UNMAPPED_BASE) {
+				start_addr = TASK_UNMAPPED_BASE;
+				mm->cached_hole_size = 0;
+				goto full_search;
+			}
+			return -ENOMEM;
+		}
+		if (!vma || addr + len <= vma->vm_start) {
+			mm->free_area_cache = addr + len;
+			return addr;
+		}
+		if (addr + mm->cached_hole_size < vma->vm_start)
+			mm->cached_hole_size = vma->vm_start - addr;
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
+	}
+}
+
+static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
+		unsigned long addr0, unsigned long len,
+		unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma, *prev_vma;
+	unsigned long base = mm->mmap_base, addr = addr0;
+	unsigned long largest_hole = mm->cached_hole_size;
+	int first_time = 1;
+
+	/* don't allow allocations above current base */
+	if (mm->free_area_cache > base)
+		mm->free_area_cache = base;
+
+	if (len <= largest_hole) {
+		largest_hole = 0;
+		mm->free_area_cache  = base;
+	}
+try_again:
+	/* make sure it can fit in the remaining address space */
+	if (mm->free_area_cache < len)
+		goto fail;
+
+	/* either no address requested or cant fit in requested address hole */
+	addr = (mm->free_area_cache - len) & huge_page_mask(h);
+	do {
+		/*
+		 * Lookup failure means no vma is above this address,
+		 * i.e. return with success:
+		 */
+		vma = find_vma_prev(mm, addr, &prev_vma);
+		if (!vma) {
+			return addr;
+			break;
+		}
+
+		/*
+		 * new region fits between prev_vma->vm_end and
+		 * vma->vm_start, use it:
+		 */
+		if (addr + len <= vma->vm_start &&
+			    (!prev_vma || (addr >= prev_vma->vm_end))) {
+			/* remember the address as a hint for next time */
+			mm->cached_hole_size = largest_hole;
+			mm->free_area_cache = addr;
+			return addr;
+		} else {
+			/* pull free_area_cache down to the first hole */
+			if (mm->free_area_cache == vma->vm_end) {
+				mm->free_area_cache = vma->vm_start;
+				mm->cached_hole_size = largest_hole;
+			}
+		}
+
+		/* remember the largest hole we saw so far */
+		if (addr + largest_hole < vma->vm_start)
+			largest_hole = vma->vm_start - addr;
+
+		/* try just below the current vma->vm_start */
+		addr = (vma->vm_start - len) & huge_page_mask(h);
+
+	} while (len <= vma->vm_start);
+
+fail:
+	/*
+	 * if hint left us with no space for the requested
+	 * mapping then try again:
+	 */
+	if (first_time) {
+		mm->free_area_cache = base;
+		largest_hole = 0;
+		first_time = 0;
+		goto try_again;
+	}
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	mm->free_area_cache = TASK_UNMAPPED_BASE;
+	mm->cached_hole_size = ~0UL;
+	addr = hugetlb_get_unmapped_area_bottomup(file, addr0,
+			len, pgoff, flags);
+
+	/*
+	 * Restore the topdown base:
+	 */
+	mm->free_area_cache = base;
+	mm->cached_hole_size = ~0UL;
+
+	return addr;
+}
+
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED) {
+		if (prepare_hugepage_range(file, addr, len))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (addr) {
+		addr = ALIGN(addr, huge_page_size(h));
+		vma = find_vma(mm, addr);
+		if (TASK_SIZE - len >= addr &&
+		    (!vma || addr + len <= vma->vm_start))
+			return addr;
+	}
+	if (current->mm->get_unmapped_area == arch_get_unmapped_area)
+		return hugetlb_get_unmapped_area_bottomup(file, addr, len,
+				pgoff, flags);
+	else
+		return hugetlb_get_unmapped_area_topdown(file, addr, len,
+				pgoff, flags);
+}
+
+static __init int setup_hugepagesz(char *opt)
+{
+	unsigned long ps = memparse(opt, &opt);
+	if (ps == PMD_SIZE) {
+		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	} else if (ps == PUD_SIZE) {
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else {
+		pr_err("hugepagesz: Unsupported page size %lu M\n",
+			ps >> 20);
+		return 0;
+	}
+	return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+
+#endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
new file mode 100644
index 00000000000..d89c9eacd16
--- /dev/null
+++ b/arch/tile/mm/init.c
@@ -0,0 +1,1085 @@
+/*
+ * Copyright (C) 1995  Linus Torvalds
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/poison.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/efi.h>
+#include <linux/memory_hotplug.h>
+#include <linux/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/fixmap.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/homecache.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+#include "migrate.h"
+
+/*
+ * We could set FORCE_MAX_ZONEORDER to "(HPAGE_SHIFT - PAGE_SHIFT + 1)"
+ * in the Tile Kconfig, but this generates configure warnings.
+ * Do it here and force people to get it right to compile this file.
+ * The problem is that with 4KB small pages and 16MB huge pages,
+ * the default value doesn't allow us to group enough small pages
+ * together to make up a huge page.
+ */
+#if CONFIG_FORCE_MAX_ZONEORDER < HPAGE_SHIFT - PAGE_SHIFT + 1
+# error "Change FORCE_MAX_ZONEORDER in arch/tile/Kconfig to match page size"
+#endif
+
+#define clear_pgd(pmdptr) (*(pmdptr) = hv_pte(0))
+
+#ifndef __tilegx__
+unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE;
+#endif
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/* Create an L2 page table */
+static pte_t * __init alloc_pte(void)
+{
+	return __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0);
+}
+
+/*
+ * L2 page tables per controller.  We allocate these all at once from
+ * the bootmem allocator and store them here.  This saves on kernel L2
+ * page table memory, compared to allocating a full 64K page per L2
+ * page table, and also means that in cases where we use huge pages,
+ * we are guaranteed to later be able to shatter those huge pages and
+ * switch to using these page tables instead, without requiring
+ * further allocation.  Each l2_ptes[] entry points to the first page
+ * table for the first hugepage-size piece of memory on the
+ * controller; other page tables are just indexed directly, i.e. the
+ * L2 page tables are contiguous in memory for each controller.
+ */
+static pte_t *l2_ptes[MAX_NUMNODES];
+static int num_l2_ptes[MAX_NUMNODES];
+
+static void init_prealloc_ptes(int node, int pages)
+{
+	BUG_ON(pages & (HV_L2_ENTRIES-1));
+	if (pages) {
+		num_l2_ptes[node] = pages;
+		l2_ptes[node] = __alloc_bootmem(pages * sizeof(pte_t),
+						HV_PAGE_TABLE_ALIGN, 0);
+	}
+}
+
+pte_t *get_prealloc_pte(unsigned long pfn)
+{
+	int node = pfn_to_nid(pfn);
+	pfn &= ~(-1UL << (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT));
+	BUG_ON(node >= MAX_NUMNODES);
+	BUG_ON(pfn >= num_l2_ptes[node]);
+	return &l2_ptes[node][pfn];
+}
+
+/*
+ * What caching do we expect pages from the heap to have when
+ * they are allocated during bootup?  (Once we've installed the
+ * "real" swapper_pg_dir.)
+ */
+static int initial_heap_home(void)
+{
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default)
+		return PAGE_HOME_HASH;
+#endif
+	return smp_processor_id();
+}
+
+/*
+ * Place a pointer to an L2 page table in a middle page
+ * directory entry.
+ */
+static void __init assign_pte(pmd_t *pmd, pte_t *page_table)
+{
+	phys_addr_t pa = __pa(page_table);
+	unsigned long l2_ptfn = pa >> HV_LOG2_PAGE_TABLE_ALIGN;
+	pte_t pteval = hv_pte_set_ptfn(__pgprot(_PAGE_TABLE), l2_ptfn);
+	BUG_ON((pa & (HV_PAGE_TABLE_ALIGN-1)) != 0);
+	pteval = pte_set_home(pteval, initial_heap_home());
+	*(pte_t *)pmd = pteval;
+	if (page_table != (pte_t *)pmd_page_vaddr(*pmd))
+		BUG();
+}
+
+#ifdef __tilegx__
+
+#if HV_L1_SIZE != HV_L2_SIZE
+# error Rework assumption that L1 and L2 page tables are same size.
+#endif
+
+/* Since pmd_t arrays and pte_t arrays are the same size, just use casts. */
+static inline pmd_t *alloc_pmd(void)
+{
+	return (pmd_t *)alloc_pte();
+}
+
+static inline void assign_pmd(pud_t *pud, pmd_t *pmd)
+{
+	assign_pte((pmd_t *)pud, (pte_t *)pmd);
+}
+
+#endif /* __tilegx__ */
+
+/* Replace the given pmd with a full PTE table. */
+void __init shatter_pmd(pmd_t *pmd)
+{
+	pte_t *pte = get_prealloc_pte(pte_pfn(*(pte_t *)pmd));
+	assign_pte(pmd, pte);
+}
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * This function initializes a certain range of kernel virtual memory
+ * with new bootmem page tables, everywhere page tables are missing in
+ * the given range.
+ */
+
+/*
+ * NOTE: The pagetables are allocated contiguous on the physical space
+ * so we can cache the place of the first one and move around without
+ * checking the pgd every time.
+ */
+static void __init page_table_range_init(unsigned long start,
+					 unsigned long end, pgd_t *pgd_base)
+{
+	pgd_t *pgd;
+	int pgd_idx;
+	unsigned long vaddr;
+
+	vaddr = start;
+	pgd_idx = pgd_index(vaddr);
+	pgd = pgd_base + pgd_idx;
+
+	for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
+		pmd_t *pmd = pmd_offset(pud_offset(pgd, vaddr), vaddr);
+		if (pmd_none(*pmd))
+			assign_pte(pmd, alloc_pte());
+		vaddr += PMD_SIZE;
+	}
+}
+#endif /* CONFIG_HIGHMEM */
+
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+
+static int __initdata ktext_hash = 1;  /* .text pages */
+static int __initdata kdata_hash = 1;  /* .data and .bss pages */
+int __write_once hash_default = 1;     /* kernel allocator pages */
+EXPORT_SYMBOL(hash_default);
+int __write_once kstack_hash = 1;      /* if no homecaching, use h4h */
+#endif /* CHIP_HAS_CBOX_HOME_MAP */
+
+/*
+ * CPUs to use to for striping the pages of kernel data.  If hash-for-home
+ * is available, this is only relevant if kcache_hash sets up the
+ * .data and .bss to be page-homed, and we don't want the default mode
+ * of using the full set of kernel cpus for the striping.
+ */
+static __initdata struct cpumask kdata_mask;
+static __initdata int kdata_arg_seen;
+
+int __write_once kdata_huge;       /* if no homecaching, small pages */
+
+
+/* Combine a generic pgprot_t with cache home to get a cache-aware pgprot. */
+static pgprot_t __init construct_pgprot(pgprot_t prot, int home)
+{
+	prot = pte_set_home(prot, home);
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (home == PAGE_HOME_IMMUTABLE) {
+		if (ktext_hash)
+			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_HASH_L3);
+		else
+			prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_NO_L3);
+	}
+#endif
+	return prot;
+}
+
+/*
+ * For a given kernel data VA, how should it be cached?
+ * We return the complete pgprot_t with caching bits set.
+ */
+static pgprot_t __init init_pgprot(ulong address)
+{
+	int cpu;
+	unsigned long page;
+	enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	/* For kdata=huge, everything is just hash-for-home. */
+	if (kdata_huge)
+		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+
+	/* We map the aliased pages of permanent text inaccessible. */
+	if (address < (ulong) _sinittext - CODE_DELTA)
+		return PAGE_NONE;
+
+	/*
+	 * We map read-only data non-coherent for performance.  We could
+	 * use neighborhood caching on TILE64, but it's not clear it's a win.
+	 */
+	if ((address >= (ulong) __start_rodata &&
+	     address < (ulong) __end_rodata) ||
+	    address == (ulong) empty_zero_page) {
+		return construct_pgprot(PAGE_KERNEL_RO, PAGE_HOME_IMMUTABLE);
+	}
+
+	/* As a performance optimization, keep the boot init stack here. */
+	if (address >= (ulong)&init_thread_union &&
+	    address < (ulong)&init_thread_union + THREAD_SIZE)
+		return construct_pgprot(PAGE_KERNEL, smp_processor_id());
+
+#ifndef __tilegx__
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+	/* Force the atomic_locks[] array page to be hash-for-home. */
+	if (address == (ulong) atomic_locks)
+		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+#endif
+
+	/*
+	 * Everything else that isn't data or bss is heap, so mark it
+	 * with the initial heap home (hash-for-home, or this cpu).  This
+	 * includes any addresses after the loaded image and any address before
+	 * _einitdata, since we already captured the case of text before
+	 * _sinittext, and __pa(einittext) is approximately __pa(sinitdata).
+	 *
+	 * All the LOWMEM pages that we mark this way will get their
+	 * struct page homecache properly marked later, in set_page_homes().
+	 * The HIGHMEM pages we leave with a default zero for their
+	 * homes, but with a zero free_time we don't have to actually
+	 * do a flush action the first time we use them, either.
+	 */
+	if (address >= (ulong) _end || address < (ulong) _einitdata)
+		return construct_pgprot(PAGE_KERNEL, initial_heap_home());
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	/* Use hash-for-home if requested for data/bss. */
+	if (kdata_hash)
+		return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+
+	/*
+	 * Make the w1data homed like heap to start with, to avoid
+	 * making it part of the page-striped data area when we're just
+	 * going to convert it to read-only soon anyway.
+	 */
+	if (address >= (ulong)__w1data_begin && address < (ulong)__w1data_end)
+		return construct_pgprot(PAGE_KERNEL, initial_heap_home());
+
+	/*
+	 * Otherwise we just hand out consecutive cpus.  To avoid
+	 * requiring this function to hold state, we just walk forward from
+	 * _sdata by PAGE_SIZE, skipping the readonly and init data, to reach
+	 * the requested address, while walking cpu home around kdata_mask.
+	 * This is typically no more than a dozen or so iterations.
+	 */
+	page = (((ulong)__w1data_end) + PAGE_SIZE - 1) & PAGE_MASK;
+	BUG_ON(address < page || address >= (ulong)_end);
+	cpu = cpumask_first(&kdata_mask);
+	for (; page < address; page += PAGE_SIZE) {
+		if (page >= (ulong)&init_thread_union &&
+		    page < (ulong)&init_thread_union + THREAD_SIZE)
+			continue;
+		if (page == (ulong)empty_zero_page)
+			continue;
+#ifndef __tilegx__
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+		if (page == (ulong)atomic_locks)
+			continue;
+#endif
+#endif
+		cpu = cpumask_next(cpu, &kdata_mask);
+		if (cpu == NR_CPUS)
+			cpu = cpumask_first(&kdata_mask);
+	}
+	return construct_pgprot(PAGE_KERNEL, cpu);
+}
+
+/*
+ * This function sets up how we cache the kernel text.  If we have
+ * hash-for-home support, normally that is used instead (see the
+ * kcache_hash boot flag for more information).  But if we end up
+ * using a page-based caching technique, this option sets up the
+ * details of that.  In addition, the "ktext=nocache" option may
+ * always be used to disable local caching of text pages, if desired.
+ */
+
+static int __initdata ktext_arg_seen;
+static int __initdata ktext_small;
+static int __initdata ktext_local;
+static int __initdata ktext_all;
+static int __initdata ktext_nondataplane;
+static int __initdata ktext_nocache;
+static struct cpumask __initdata ktext_mask;
+
+static int __init setup_ktext(char *str)
+{
+	if (str == NULL)
+		return -EINVAL;
+
+	/* If you have a leading "nocache", turn off ktext caching */
+	if (strncmp(str, "nocache", 7) == 0) {
+		ktext_nocache = 1;
+		pr_info("ktext: disabling local caching of kernel text\n");
+		str += 7;
+		if (*str == ',')
+			++str;
+		if (*str == '\0')
+			return 0;
+	}
+
+	ktext_arg_seen = 1;
+
+	/* Default setting on Tile64: use a huge page */
+	if (strcmp(str, "huge") == 0)
+		pr_info("ktext: using one huge locally cached page\n");
+
+	/* Pay TLB cost but get no cache benefit: cache small pages locally */
+	else if (strcmp(str, "local") == 0) {
+		ktext_small = 1;
+		ktext_local = 1;
+		pr_info("ktext: using small pages with local caching\n");
+	}
+
+	/* Neighborhood cache ktext pages on all cpus. */
+	else if (strcmp(str, "all") == 0) {
+		ktext_small = 1;
+		ktext_all = 1;
+		pr_info("ktext: using maximal caching neighborhood\n");
+	}
+
+
+	/* Neighborhood ktext pages on specified mask */
+	else if (cpulist_parse(str, &ktext_mask) == 0) {
+		char buf[NR_CPUS * 5];
+		cpulist_scnprintf(buf, sizeof(buf), &ktext_mask);
+		if (cpumask_weight(&ktext_mask) > 1) {
+			ktext_small = 1;
+			pr_info("ktext: using caching neighborhood %s "
+			       "with small pages\n", buf);
+		} else {
+			pr_info("ktext: caching on cpu %s with one huge page\n",
+			       buf);
+		}
+	}
+
+	else if (*str)
+		return -EINVAL;
+
+	return 0;
+}
+
+early_param("ktext", setup_ktext);
+
+
+static inline pgprot_t ktext_set_nocache(pgprot_t prot)
+{
+	if (!ktext_nocache)
+		prot = hv_pte_set_nc(prot);
+#if CHIP_HAS_NC_AND_NOALLOC_BITS()
+	else
+		prot = hv_pte_set_no_alloc_l2(prot);
+#endif
+	return prot;
+}
+
+#ifndef __tilegx__
+static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va)
+{
+	return pmd_offset(pud_offset(&pgtables[pgd_index(va)], va), va);
+}
+#else
+static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va)
+{
+	pud_t *pud = pud_offset(&pgtables[pgd_index(va)], va);
+	if (pud_none(*pud))
+		assign_pmd(pud, alloc_pmd());
+	return pmd_offset(pud, va);
+}
+#endif
+
+/* Temporary page table we use for staging. */
+static pgd_t pgtables[PTRS_PER_PGD]
+ __attribute__((section(".init.page")));
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET.
+ *
+ * This routine transitions us from using a set of compiled-in large
+ * pages to using some more precise caching, including removing access
+ * to code pages mapped at PAGE_OFFSET (executed only at MEM_SV_START)
+ * marking read-only data as locally cacheable, striping the remaining
+ * .data and .bss across all the available tiles, and removing access
+ * to pages above the top of RAM (thus ensuring a page fault from a bad
+ * virtual address rather than a hypervisor shoot down for accessing
+ * memory outside the assigned limits).
+ */
+static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
+{
+	unsigned long address, pfn;
+	pmd_t *pmd;
+	pte_t *pte;
+	int pte_ofs;
+	const struct cpumask *my_cpu_mask = cpumask_of(smp_processor_id());
+	struct cpumask kstripe_mask;
+	int rc, i;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (ktext_arg_seen && ktext_hash) {
+		pr_warning("warning: \"ktext\" boot argument ignored"
+			   " if \"kcache_hash\" sets up text hash-for-home\n");
+		ktext_small = 0;
+	}
+
+	if (kdata_arg_seen && kdata_hash) {
+		pr_warning("warning: \"kdata\" boot argument ignored"
+			   " if \"kcache_hash\" sets up data hash-for-home\n");
+	}
+
+	if (kdata_huge && !hash_default) {
+		pr_warning("warning: disabling \"kdata=huge\"; requires"
+			  " kcache_hash=all or =allbutstack\n");
+		kdata_huge = 0;
+	}
+#endif
+
+	/*
+	 * Set up a mask for cpus to use for kernel striping.
+	 * This is normally all cpus, but minus dataplane cpus if any.
+	 * If the dataplane covers the whole chip, we stripe over
+	 * the whole chip too.
+	 */
+	cpumask_copy(&kstripe_mask, cpu_possible_mask);
+	if (!kdata_arg_seen)
+		kdata_mask = kstripe_mask;
+
+	/* Allocate and fill in L2 page tables */
+	for (i = 0; i < MAX_NUMNODES; ++i) {
+#ifdef CONFIG_HIGHMEM
+		unsigned long end_pfn = node_lowmem_end_pfn[i];
+#else
+		unsigned long end_pfn = node_end_pfn[i];
+#endif
+		unsigned long end_huge_pfn = 0;
+
+		/* Pre-shatter the last huge page to allow per-cpu pages. */
+		if (kdata_huge)
+			end_huge_pfn = end_pfn - (HPAGE_SIZE >> PAGE_SHIFT);
+
+		pfn = node_start_pfn[i];
+
+		/* Allocate enough memory to hold L2 page tables for node. */
+		init_prealloc_ptes(i, end_pfn - pfn);
+
+		address = (unsigned long) pfn_to_kaddr(pfn);
+		while (pfn < end_pfn) {
+			BUG_ON(address & (HPAGE_SIZE-1));
+			pmd = get_pmd(pgtables, address);
+			pte = get_prealloc_pte(pfn);
+			if (pfn < end_huge_pfn) {
+				pgprot_t prot = init_pgprot(address);
+				*(pte_t *)pmd = pte_mkhuge(pfn_pte(pfn, prot));
+				for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE;
+				     pfn++, pte_ofs++, address += PAGE_SIZE)
+					pte[pte_ofs] = pfn_pte(pfn, prot);
+			} else {
+				if (kdata_huge)
+					printk(KERN_DEBUG "pre-shattered huge"
+					       " page at %#lx\n", address);
+				for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE;
+				     pfn++, pte_ofs++, address += PAGE_SIZE) {
+					pgprot_t prot = init_pgprot(address);
+					pte[pte_ofs] = pfn_pte(pfn, prot);
+				}
+				assign_pte(pmd, pte);
+			}
+		}
+	}
+
+	/*
+	 * Set or check ktext_map now that we have cpu_possible_mask
+	 * and kstripe_mask to work with.
+	 */
+	if (ktext_all)
+		cpumask_copy(&ktext_mask, cpu_possible_mask);
+	else if (ktext_nondataplane)
+		ktext_mask = kstripe_mask;
+	else if (!cpumask_empty(&ktext_mask)) {
+		/* Sanity-check any mask that was requested */
+		struct cpumask bad;
+		cpumask_andnot(&bad, &ktext_mask, cpu_possible_mask);
+		cpumask_and(&ktext_mask, &ktext_mask, cpu_possible_mask);
+		if (!cpumask_empty(&bad)) {
+			char buf[NR_CPUS * 5];
+			cpulist_scnprintf(buf, sizeof(buf), &bad);
+			pr_info("ktext: not using unavailable cpus %s\n", buf);
+		}
+		if (cpumask_empty(&ktext_mask)) {
+			pr_warning("ktext: no valid cpus; caching on %d.\n",
+				   smp_processor_id());
+			cpumask_copy(&ktext_mask,
+				     cpumask_of(smp_processor_id()));
+		}
+	}
+
+	address = MEM_SV_INTRPT;
+	pmd = get_pmd(pgtables, address);
+	if (ktext_small) {
+		/* Allocate an L2 PTE for the kernel text */
+		int cpu = 0;
+		pgprot_t prot = construct_pgprot(PAGE_KERNEL_EXEC,
+						 PAGE_HOME_IMMUTABLE);
+
+		if (ktext_local) {
+			if (ktext_nocache)
+				prot = hv_pte_set_mode(prot,
+						       HV_PTE_MODE_UNCACHED);
+			else
+				prot = hv_pte_set_mode(prot,
+						       HV_PTE_MODE_CACHE_NO_L3);
+		} else {
+			prot = hv_pte_set_mode(prot,
+					       HV_PTE_MODE_CACHE_TILE_L3);
+			cpu = cpumask_first(&ktext_mask);
+
+			prot = ktext_set_nocache(prot);
+		}
+
+		BUG_ON(address != (unsigned long)_stext);
+		pfn = 0;  /* code starts at PA 0 */
+		pte = alloc_pte();
+		for (pte_ofs = 0; address < (unsigned long)_einittext;
+		     pfn++, pte_ofs++, address += PAGE_SIZE) {
+			if (!ktext_local) {
+				prot = set_remote_cache_cpu(prot, cpu);
+				cpu = cpumask_next(cpu, &ktext_mask);
+				if (cpu == NR_CPUS)
+					cpu = cpumask_first(&ktext_mask);
+			}
+			pte[pte_ofs] = pfn_pte(pfn, prot);
+		}
+		assign_pte(pmd, pte);
+	} else {
+		pte_t pteval = pfn_pte(0, PAGE_KERNEL_EXEC);
+		pteval = pte_mkhuge(pteval);
+#if CHIP_HAS_CBOX_HOME_MAP()
+		if (ktext_hash) {
+			pteval = hv_pte_set_mode(pteval,
+						 HV_PTE_MODE_CACHE_HASH_L3);
+			pteval = ktext_set_nocache(pteval);
+		} else
+#endif /* CHIP_HAS_CBOX_HOME_MAP() */
+		if (cpumask_weight(&ktext_mask) == 1) {
+			pteval = set_remote_cache_cpu(pteval,
+					      cpumask_first(&ktext_mask));
+			pteval = hv_pte_set_mode(pteval,
+						 HV_PTE_MODE_CACHE_TILE_L3);
+			pteval = ktext_set_nocache(pteval);
+		} else if (ktext_nocache)
+			pteval = hv_pte_set_mode(pteval,
+						 HV_PTE_MODE_UNCACHED);
+		else
+			pteval = hv_pte_set_mode(pteval,
+						 HV_PTE_MODE_CACHE_NO_L3);
+		*(pte_t *)pmd = pteval;
+	}
+
+	/* Set swapper_pgprot here so it is flushed to memory right away. */
+	swapper_pgprot = init_pgprot((unsigned long)swapper_pg_dir);
+
+	/*
+	 * Since we may be changing the caching of the stack and page
+	 * table itself, we invoke an assembly helper to do the
+	 * following steps:
+	 *
+	 *  - flush the cache so we start with an empty slate
+	 *  - install pgtables[] as the real page table
+	 *  - flush the TLB so the new page table takes effect
+	 */
+	rc = flush_and_install_context(__pa(pgtables),
+				       init_pgprot((unsigned long)pgtables),
+				       __get_cpu_var(current_asid),
+				       cpumask_bits(my_cpu_mask));
+	BUG_ON(rc != 0);
+
+	/* Copy the page table back to the normal swapper_pg_dir. */
+	memcpy(pgd_base, pgtables, sizeof(pgtables));
+	__install_page_table(pgd_base, __get_cpu_var(current_asid),
+			     swapper_pgprot);
+}
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.
+ *
+ * On Tile, the only valid things for which we can just hand out unchecked
+ * PTEs are the kernel code and data.  Anything else might change its
+ * homing with time, and we wouldn't know to adjust the /dev/mem PTEs.
+ * Note that init_thread_union is released to heap soon after boot,
+ * so we include it in the init data.
+ *
+ * For TILE-Gx, we might want to consider allowing access to PA
+ * regions corresponding to PCI space, etc.
+ */
+int devmem_is_allowed(unsigned long pagenr)
+{
+	return pagenr < kaddr_to_pfn(_end) &&
+		!(pagenr >= kaddr_to_pfn(&init_thread_union) ||
+		  pagenr < kaddr_to_pfn(_einitdata)) &&
+		!(pagenr >= kaddr_to_pfn(_sinittext) ||
+		  pagenr <= kaddr_to_pfn(_einittext-1));
+}
+
+#ifdef CONFIG_HIGHMEM
+static void __init permanent_kmaps_init(pgd_t *pgd_base)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+	unsigned long vaddr;
+
+	vaddr = PKMAP_BASE;
+	page_table_range_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+
+	pgd = swapper_pg_dir + pgd_index(vaddr);
+	pud = pud_offset(pgd, vaddr);
+	pmd = pmd_offset(pud, vaddr);
+	pte = pte_offset_kernel(pmd, vaddr);
+	pkmap_page_table = pte;
+}
+#endif /* CONFIG_HIGHMEM */
+
+
+static void __init init_free_pfn_range(unsigned long start, unsigned long end)
+{
+	unsigned long pfn;
+	struct page *page = pfn_to_page(start);
+
+	for (pfn = start; pfn < end; ) {
+		/* Optimize by freeing pages in large batches */
+		int order = __ffs(pfn);
+		int count, i;
+		struct page *p;
+
+		if (order >= MAX_ORDER)
+			order = MAX_ORDER-1;
+		count = 1 << order;
+		while (pfn + count > end) {
+			count >>= 1;
+			--order;
+		}
+		for (p = page, i = 0; i < count; ++i, ++p) {
+			__ClearPageReserved(p);
+			/*
+			 * Hacky direct set to avoid unnecessary
+			 * lock take/release for EVERY page here.
+			 */
+			p->_count.counter = 0;
+			p->_mapcount.counter = -1;
+		}
+		init_page_count(page);
+		__free_pages(page, order);
+		totalram_pages += count;
+
+		page += count;
+		pfn += count;
+	}
+}
+
+static void __init set_non_bootmem_pages_init(void)
+{
+	struct zone *z;
+	for_each_zone(z) {
+		unsigned long start, end;
+		int nid = z->zone_pgdat->node_id;
+		int idx = zone_idx(z);
+
+		start = z->zone_start_pfn;
+		if (start == 0)
+			continue;  /* bootmem */
+		end = start + z->spanned_pages;
+		if (idx == ZONE_NORMAL) {
+			BUG_ON(start != node_start_pfn[nid]);
+			start = node_free_pfn[nid];
+		}
+#ifdef CONFIG_HIGHMEM
+		if (idx == ZONE_HIGHMEM)
+			totalhigh_pages += z->spanned_pages;
+#endif
+		if (kdata_huge) {
+			unsigned long percpu_pfn = node_percpu_pfn[nid];
+			if (start < percpu_pfn && end > percpu_pfn)
+				end = percpu_pfn;
+		}
+#ifdef CONFIG_PCI
+		if (start <= pci_reserve_start_pfn &&
+		    end > pci_reserve_start_pfn) {
+			if (end > pci_reserve_end_pfn)
+				init_free_pfn_range(pci_reserve_end_pfn, end);
+			end = pci_reserve_start_pfn;
+		}
+#endif
+		init_free_pfn_range(start, end);
+	}
+}
+
+/*
+ * paging_init() sets up the page tables - note that all of lowmem is
+ * already mapped by head.S.
+ */
+void __init paging_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+	unsigned long vaddr, end;
+#endif
+#ifdef __tilegx__
+	pud_t *pud;
+#endif
+	pgd_t *pgd_base = swapper_pg_dir;
+
+	kernel_physical_mapping_init(pgd_base);
+
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * Fixed mappings, only the page table structure has to be
+	 * created - mappings will be set by set_fixmap():
+	 */
+	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
+	page_table_range_init(vaddr, end, pgd_base);
+	permanent_kmaps_init(pgd_base);
+#endif
+
+#ifdef __tilegx__
+	/*
+	 * Since GX allocates just one pmd_t array worth of vmalloc space,
+	 * we go ahead and allocate it statically here, then share it
+	 * globally.  As a result we don't have to worry about any task
+	 * changing init_mm once we get up and running, and there's no
+	 * need for e.g. vmalloc_sync_all().
+	 */
+	BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END));
+	pud = pud_offset(pgd_base + pgd_index(VMALLOC_START), VMALLOC_START);
+	assign_pmd(pud, alloc_pmd());
+#endif
+}
+
+
+/*
+ * Walk the kernel page tables and derive the page_home() from
+ * the PTEs, so that set_pte() can properly validate the caching
+ * of all PTEs it sees.
+ */
+void __init set_page_homes(void)
+{
+}
+
+static void __init set_max_mapnr_init(void)
+{
+#ifdef CONFIG_FLATMEM
+	max_mapnr = max_low_pfn;
+#endif
+}
+
+void __init mem_init(void)
+{
+	int codesize, datasize, initsize;
+	int i;
+#ifndef __tilegx__
+	void *last;
+#endif
+
+#ifdef CONFIG_FLATMEM
+	if (!mem_map)
+		BUG();
+#endif
+
+#ifdef CONFIG_HIGHMEM
+	/* check that fixmap and pkmap do not overlap */
+	if (PKMAP_ADDR(LAST_PKMAP-1) >= FIXADDR_START) {
+		pr_err("fixmap and kmap areas overlap"
+		       " - this will crash\n");
+		pr_err("pkstart: %lxh pkend: %lxh fixstart %lxh\n",
+		       PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP-1),
+		       FIXADDR_START);
+		BUG();
+	}
+#endif
+
+	set_max_mapnr_init();
+
+	/* this will put all bootmem onto the freelists */
+	totalram_pages += free_all_bootmem();
+
+	/* count all remaining LOWMEM and give all HIGHMEM to page allocator */
+	set_non_bootmem_pages_init();
+
+	codesize =  (unsigned long)&_etext - (unsigned long)&_text;
+	datasize =  (unsigned long)&_end - (unsigned long)&_sdata;
+	initsize =  (unsigned long)&_einittext - (unsigned long)&_sinittext;
+	initsize += (unsigned long)&_einitdata - (unsigned long)&_sinitdata;
+
+	pr_info("Memory: %luk/%luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
+		(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+		num_physpages << (PAGE_SHIFT-10),
+		codesize >> 10,
+		datasize >> 10,
+		initsize >> 10,
+		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
+	       );
+
+	/*
+	 * In debug mode, dump some interesting memory mappings.
+	 */
+#ifdef CONFIG_HIGHMEM
+	printk(KERN_DEBUG "  KMAP    %#lx - %#lx\n",
+	       FIXADDR_START, FIXADDR_TOP + PAGE_SIZE - 1);
+	printk(KERN_DEBUG "  PKMAP   %#lx - %#lx\n",
+	       PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP) - 1);
+#endif
+#ifdef CONFIG_HUGEVMAP
+	printk(KERN_DEBUG "  HUGEMAP %#lx - %#lx\n",
+	       HUGE_VMAP_BASE, HUGE_VMAP_END - 1);
+#endif
+	printk(KERN_DEBUG "  VMALLOC %#lx - %#lx\n",
+	       _VMALLOC_START, _VMALLOC_END - 1);
+#ifdef __tilegx__
+	for (i = MAX_NUMNODES-1; i >= 0; --i) {
+		struct pglist_data *node = &node_data[i];
+		if (node->node_present_pages) {
+			unsigned long start = (unsigned long)
+				pfn_to_kaddr(node->node_start_pfn);
+			unsigned long end = start +
+				(node->node_present_pages << PAGE_SHIFT);
+			printk(KERN_DEBUG "  MEM%d    %#lx - %#lx\n",
+			       i, start, end - 1);
+		}
+	}
+#else
+	last = high_memory;
+	for (i = MAX_NUMNODES-1; i >= 0; --i) {
+		if ((unsigned long)vbase_map[i] != -1UL) {
+			printk(KERN_DEBUG "  LOWMEM%d %#lx - %#lx\n",
+			       i, (unsigned long) (vbase_map[i]),
+			       (unsigned long) (last-1));
+			last = vbase_map[i];
+		}
+	}
+#endif
+
+#ifndef __tilegx__
+	/*
+	 * Convert from using one lock for all atomic operations to
+	 * one per cpu.
+	 */
+	__init_atomic_per_cpu();
+#endif
+}
+
+/*
+ * this is for the non-NUMA, single node SMP system case.
+ * Specifically, in the case of x86, we will always add
+ * memory to the highmem for now.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+int arch_add_memory(u64 start, u64 size)
+{
+	struct pglist_data *pgdata = &contig_page_data;
+	struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	return __add_pages(zone, start_pfn, nr_pages);
+}
+
+int remove_memory(u64 start, u64 size)
+{
+	return -EINVAL;
+}
+#endif
+
+struct kmem_cache *pgd_cache;
+
+void __init pgtable_cache_init(void)
+{
+	pgd_cache = kmem_cache_create("pgd",
+				PTRS_PER_PGD*sizeof(pgd_t),
+				PTRS_PER_PGD*sizeof(pgd_t),
+				0,
+				NULL);
+	if (!pgd_cache)
+		panic("pgtable_cache_init(): Cannot create pgd cache");
+}
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+/*
+ * The __w1data area holds data that is only written during initialization,
+ * and is read-only and thus freely cacheable thereafter.  Fix the page
+ * table entries that cover that region accordingly.
+ */
+static void mark_w1data_ro(void)
+{
+	/* Loop over page table entries */
+	unsigned long addr = (unsigned long)__w1data_begin;
+	BUG_ON((addr & (PAGE_SIZE-1)) != 0);
+	for (; addr <= (unsigned long)__w1data_end - 1; addr += PAGE_SIZE) {
+		unsigned long pfn = kaddr_to_pfn((void *)addr);
+		pte_t *ptep = virt_to_pte(NULL, addr);
+		BUG_ON(pte_huge(*ptep));   /* not relevant for kdata_huge */
+		set_pte_at(&init_mm, addr, ptep, pfn_pte(pfn, PAGE_KERNEL_RO));
+	}
+}
+#endif
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static long __write_once initfree;
+#else
+static long __write_once initfree = 1;
+#endif
+
+/* Select whether to free (1) or mark unusable (0) the __init pages. */
+static int __init set_initfree(char *str)
+{
+	strict_strtol(str, 0, &initfree);
+	pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't");
+	return 1;
+}
+__setup("initfree=", set_initfree);
+
+static void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+	unsigned long addr = (unsigned long) begin;
+
+	if (kdata_huge && !initfree) {
+		pr_warning("Warning: ignoring initfree=0:"
+			   " incompatible with kdata=huge\n");
+		initfree = 1;
+	}
+	end = (end + PAGE_SIZE - 1) & PAGE_MASK;
+	local_flush_tlb_pages(NULL, begin, PAGE_SIZE, end - begin);
+	for (addr = begin; addr < end; addr += PAGE_SIZE) {
+		/*
+		 * Note we just reset the home here directly in the
+		 * page table.  We know this is safe because our caller
+		 * just flushed the caches on all the other cpus,
+		 * and they won't be touching any of these pages.
+		 */
+		int pfn = kaddr_to_pfn((void *)addr);
+		struct page *page = pfn_to_page(pfn);
+		pte_t *ptep = virt_to_pte(NULL, addr);
+		if (!initfree) {
+			/*
+			 * If debugging page accesses then do not free
+			 * this memory but mark them not present - any
+			 * buggy init-section access will create a
+			 * kernel page fault:
+			 */
+			pte_clear(&init_mm, addr, ptep);
+			continue;
+		}
+		__ClearPageReserved(page);
+		init_page_count(page);
+		if (pte_huge(*ptep))
+			BUG_ON(!kdata_huge);
+		else
+			set_pte_at(&init_mm, addr, ptep,
+				   pfn_pte(pfn, PAGE_KERNEL));
+		memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
+		free_page(addr);
+		totalram_pages++;
+	}
+	pr_info("Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+void free_initmem(void)
+{
+	const unsigned long text_delta = MEM_SV_INTRPT - PAGE_OFFSET;
+
+	/*
+	 * Evict the dirty initdata on the boot cpu, evict the w1data
+	 * wherever it's homed, and evict all the init code everywhere.
+	 * We are guaranteed that no one will touch the init pages any
+	 * more, and although other cpus may be touching the w1data,
+	 * we only actually change the caching on tile64, which won't
+	 * be keeping local copies in the other tiles' caches anyway.
+	 */
+	homecache_evict(&cpu_cacheable_map);
+
+	/* Free the data pages that we won't use again after init. */
+	free_init_pages("unused kernel data",
+			(unsigned long)_sinitdata,
+			(unsigned long)_einitdata);
+
+	/*
+	 * Free the pages mapped from 0xc0000000 that correspond to code
+	 * pages from 0xfd000000 that we won't use again after init.
+	 */
+	free_init_pages("unused kernel text",
+			(unsigned long)_sinittext - text_delta,
+			(unsigned long)_einittext - text_delta);
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+	/*
+	 * Upgrade the .w1data section to globally cached.
+	 * We don't do this on tilepro, since the cache architecture
+	 * pretty much makes it irrelevant, and in any case we end
+	 * up having racing issues with other tiles that may touch
+	 * the data after we flush the cache but before we update
+	 * the PTEs and flush the TLBs, causing sharer shootdowns
+	 * later.  Even though this is to clean data, it seems like
+	 * an unnecessary complication.
+	 */
+	mark_w1data_ro();
+#endif
+
+	/* Do a global TLB flush so everyone sees the changes. */
+	flush_tlb_all();
+}
diff --git a/arch/tile/mm/migrate.h b/arch/tile/mm/migrate.h
new file mode 100644
index 00000000000..cd45a0837fa
--- /dev/null
+++ b/arch/tile/mm/migrate.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Structure definitions for migration, exposed here for use by
+ * arch/tile/kernel/asm-offsets.c.
+ */
+
+#ifndef MM_MIGRATE_H
+#define MM_MIGRATE_H
+
+#include <linux/cpumask.h>
+#include <hv/hypervisor.h>
+
+/*
+ * This function is used as a helper when setting up the initial
+ * page table (swapper_pg_dir).
+ */
+extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
+				     HV_ASID asid,
+				     const unsigned long *cpumask);
+
+/*
+ * This function supports migration as a "helper" as follows:
+ *
+ *  - Set the stack PTE itself to "migrating".
+ *  - Do a global TLB flush for (va,length) and the specified ASIDs.
+ *  - Do a cache-evict on all necessary cpus.
+ *  - Write the new stack PTE.
+ *
+ * Note that any non-NULL pointers must not point to the page that
+ * is handled by the stack_pte itself.
+ */
+extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
+				     size_t length, pte_t *stack_ptep,
+				     const struct cpumask *cache_cpumask,
+				     const struct cpumask *tlb_cpumask,
+				     HV_Remote_ASID *asids,
+				     int asidcount);
+
+#endif /* MM_MIGRATE_H */
diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S
new file mode 100644
index 00000000000..f738765cd1e
--- /dev/null
+++ b/arch/tile/mm/migrate_32.S
@@ -0,0 +1,211 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * This routine is a helper for migrating the home of a set of pages to
+ * a new cpu.  See the documentation in homecache.c for more information.
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+
+	.text
+
+/*
+ * First, some definitions that apply to all the code in the file.
+ */
+
+/* Locals (caller-save) */
+#define r_tmp		r10
+#define r_save_sp	r11
+
+/* What we save where in the stack frame; must include all callee-saves. */
+#define FRAME_SP	4
+#define FRAME_R30	8
+#define FRAME_R31	12
+#define FRAME_R32	16
+#define FRAME_R33	20
+#define FRAME_R34	24
+#define FRAME_R35	28
+#define FRAME_SIZE	32
+
+
+
+
+/*
+ * On entry:
+ *
+ *   r0 low word of the new context PA to install (moved to r_context_lo)
+ *   r1 high word of the new context PA to install (moved to r_context_hi)
+ *   r2 low word of PTE to use for context access (moved to r_access_lo)
+ *   r3 high word of PTE to use for context access (moved to r_access_lo)
+ *   r4 ASID to use for new context (moved to r_asid)
+ *   r5 pointer to cpumask with just this cpu set in it (r_my_cpumask)
+ */
+
+/* Arguments (caller-save) */
+#define r_context_lo_in	r0
+#define r_context_hi_in	r1
+#define r_access_lo_in	r2
+#define r_access_hi_in	r3
+#define r_asid_in	r4
+#define r_my_cpumask	r5
+
+/* Locals (callee-save); must not be more than FRAME_xxx above. */
+#define r_save_ics	r30
+#define r_context_lo	r31
+#define r_context_hi	r32
+#define r_access_lo	r33
+#define r_access_hi	r34
+#define r_asid		r35
+
+STD_ENTRY(flush_and_install_context)
+	/*
+	 * Create a stack frame; we can't touch it once we flush the
+	 * cache until we install the new page table and flush the TLB.
+	 */
+	{
+	 move r_save_sp, sp
+	 sw sp, lr
+	 addi sp, sp, -FRAME_SIZE
+	}
+	addi r_tmp, sp, FRAME_SP
+	{
+	 sw r_tmp, r_save_sp
+	 addi r_tmp, sp, FRAME_R30
+	}
+	{
+	 sw r_tmp, r30
+	 addi r_tmp, sp, FRAME_R31
+	}
+	{
+	 sw r_tmp, r31
+	 addi r_tmp, sp, FRAME_R32
+	}
+	{
+	 sw r_tmp, r32
+	 addi r_tmp, sp, FRAME_R33
+	}
+	{
+	 sw r_tmp, r33
+	 addi r_tmp, sp, FRAME_R34
+	}
+	{
+	 sw r_tmp, r34
+	 addi r_tmp, sp, FRAME_R35
+	}
+	sw r_tmp, r35
+
+	/* Move some arguments to callee-save registers. */
+	{
+	 move r_context_lo, r_context_lo_in
+	 move r_context_hi, r_context_hi_in
+	}
+	{
+	 move r_access_lo, r_access_lo_in
+	 move r_access_hi, r_access_hi_in
+	}
+	move r_asid, r_asid_in
+
+	/* Disable interrupts, since we can't use our stack. */
+	{
+	 mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
+	 movei r_tmp, 1
+	}
+	mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
+
+	/* First, flush our L2 cache. */
+	{
+	 move r0, zero  /* cache_pa */
+	 move r1, zero
+	}
+	{
+	 auli r2, zero, ha16(HV_FLUSH_EVICT_L2)  /* cache_control */
+	 move r3, r_my_cpumask  /* cache_cpumask */
+	}
+	{
+	 move r4, zero  /* tlb_va */
+	 move r5, zero  /* tlb_length */
+	}
+	{
+	 move r6, zero  /* tlb_pgsize */
+	 move r7, zero  /* tlb_cpumask */
+	}
+	{
+	 move r8, zero  /* asids */
+	 move r9, zero  /* asidcount */
+	}
+	jal hv_flush_remote
+	bnz r0, .Ldone
+
+	/* Now install the new page table. */
+	{
+	 move r0, r_context_lo
+	 move r1, r_context_hi
+	}
+	{
+	 move r2, r_access_lo
+	 move r3, r_access_hi
+	}
+	{
+	 move r4, r_asid
+	 movei r5, HV_CTX_DIRECTIO
+	}
+	jal hv_install_context
+	bnz r0, .Ldone
+
+	/* Finally, flush the TLB. */
+	{
+	 movei r0, 0   /* preserve_global */
+	 jal hv_flush_all
+	}
+
+.Ldone:
+	/* Reset interrupts back how they were before. */
+	mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
+
+	/* Restore the callee-saved registers and return. */
+	addli lr, sp, FRAME_SIZE
+	{
+	 lw lr, lr
+	 addli r_tmp, sp, FRAME_R30
+	}
+	{
+	 lw r30, r_tmp
+	 addli r_tmp, sp, FRAME_R31
+	}
+	{
+	 lw r31, r_tmp
+	 addli r_tmp, sp, FRAME_R32
+	}
+	{
+	 lw r32, r_tmp
+	 addli r_tmp, sp, FRAME_R33
+	}
+	{
+	 lw r33, r_tmp
+	 addli r_tmp, sp, FRAME_R34
+	}
+	{
+	 lw r34, r_tmp
+	 addli r_tmp, sp, FRAME_R35
+	}
+	{
+	 lw r35, r_tmp
+	 addi sp, sp, FRAME_SIZE
+	}
+	jrp lr
+	STD_ENDPROC(flush_and_install_context)
diff --git a/arch/tile/mm/mmap.c b/arch/tile/mm/mmap.c
new file mode 100644
index 00000000000..f96f4cec602
--- /dev/null
+++ b/arch/tile/mm/mmap.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Taken from the i386 architecture and simplified.
+ */
+
+#include <linux/mm.h>
+#include <linux/random.h>
+#include <linux/limits.h>
+#include <linux/sched.h>
+#include <linux/mman.h>
+#include <linux/compat.h>
+
+/*
+ * Top of mmap area (just below the process stack).
+ *
+ * Leave an at least ~128 MB hole.
+ */
+#define MIN_GAP (128*1024*1024)
+#define MAX_GAP (TASK_SIZE/6*5)
+
+static inline unsigned long mmap_base(struct mm_struct *mm)
+{
+	unsigned long gap = rlimit(RLIMIT_STACK);
+	unsigned long random_factor = 0;
+
+	if (current->flags & PF_RANDOMIZE)
+		random_factor = get_random_int() % (1024*1024);
+
+	if (gap < MIN_GAP)
+		gap = MIN_GAP;
+	else if (gap > MAX_GAP)
+		gap = MAX_GAP;
+
+	return PAGE_ALIGN(TASK_SIZE - gap - random_factor);
+}
+
+/*
+ * This function, called very early during the creation of a new
+ * process VM image, sets up which VM layout function to use:
+ */
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+#if !defined(__tilegx__)
+	int is_32bit = 1;
+#elif defined(CONFIG_COMPAT)
+	int is_32bit = is_compat_task();
+#else
+	int is_32bit = 0;
+#endif
+
+	/*
+	 * Use standard layout if the expected stack growth is unlimited
+	 * or we are running native 64 bits.
+	 */
+	if (!is_32bit || rlimit(RLIMIT_STACK) == RLIM_INFINITY) {
+		mm->mmap_base = TASK_UNMAPPED_BASE;
+		mm->get_unmapped_area = arch_get_unmapped_area;
+		mm->unmap_area = arch_unmap_area;
+	} else {
+		mm->mmap_base = mmap_base(mm);
+		mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+		mm->unmap_area = arch_unmap_area_topdown;
+	}
+}
diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c
new file mode 100644
index 00000000000..28c23140c94
--- /dev/null
+++ b/arch/tile/mm/pgtable.c
@@ -0,0 +1,530 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/fixmap.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+#define K(x) ((x) << (PAGE_SHIFT-10))
+
+/*
+ * The normal show_free_areas() is too verbose on Tile, with dozens
+ * of processors and often four NUMA zones each with high and lowmem.
+ */
+void show_mem(void)
+{
+	struct zone *zone;
+
+	pr_err("Active:%lu inactive:%lu dirty:%lu writeback:%lu unstable:%lu"
+	       " free:%lu\n slab:%lu mapped:%lu pagetables:%lu bounce:%lu"
+	       " pagecache:%lu swap:%lu\n",
+	       (global_page_state(NR_ACTIVE_ANON) +
+		global_page_state(NR_ACTIVE_FILE)),
+	       (global_page_state(NR_INACTIVE_ANON) +
+		global_page_state(NR_INACTIVE_FILE)),
+	       global_page_state(NR_FILE_DIRTY),
+	       global_page_state(NR_WRITEBACK),
+	       global_page_state(NR_UNSTABLE_NFS),
+	       global_page_state(NR_FREE_PAGES),
+	       (global_page_state(NR_SLAB_RECLAIMABLE) +
+		global_page_state(NR_SLAB_UNRECLAIMABLE)),
+	       global_page_state(NR_FILE_MAPPED),
+	       global_page_state(NR_PAGETABLE),
+	       global_page_state(NR_BOUNCE),
+	       global_page_state(NR_FILE_PAGES),
+	       nr_swap_pages);
+
+	for_each_zone(zone) {
+		unsigned long flags, order, total = 0, largest_order = -1;
+
+		if (!populated_zone(zone))
+			continue;
+
+		spin_lock_irqsave(&zone->lock, flags);
+		for (order = 0; order < MAX_ORDER; order++) {
+			int nr = zone->free_area[order].nr_free;
+			total += nr << order;
+			if (nr)
+				largest_order = order;
+		}
+		spin_unlock_irqrestore(&zone->lock, flags);
+		pr_err("Node %d %7s: %lukB (largest %luKb)\n",
+		       zone_to_nid(zone), zone->name,
+		       K(total), largest_order ? K(1UL) << largest_order : 0);
+	}
+}
+
+/*
+ * Associate a virtual page frame with a given physical page frame
+ * and protection flags for that frame.
+ */
+static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pgd = swapper_pg_dir + pgd_index(vaddr);
+	if (pgd_none(*pgd)) {
+		BUG();
+		return;
+	}
+	pud = pud_offset(pgd, vaddr);
+	if (pud_none(*pud)) {
+		BUG();
+		return;
+	}
+	pmd = pmd_offset(pud, vaddr);
+	if (pmd_none(*pmd)) {
+		BUG();
+		return;
+	}
+	pte = pte_offset_kernel(pmd, vaddr);
+	/* <pfn,flags> stored as-is, to permit clearing entries */
+	set_pte(pte, pfn_pte(pfn, flags));
+
+	/*
+	 * It's enough to flush this one mapping.
+	 * This appears conservative since it is only called
+	 * from __set_fixmap.
+	 */
+	local_flush_tlb_page(NULL, vaddr, PAGE_SIZE);
+}
+
+void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+{
+	unsigned long address = __fix_to_virt(idx);
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+	set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
+}
+
+#if defined(CONFIG_HIGHPTE)
+pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type)
+{
+	pte_t *pte = kmap_atomic(pmd_page(*dir), type) +
+		(pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
+	return &pte[pte_index(address)];
+}
+#endif
+
+/*
+ * List of all pgd's needed so it can invalidate entries in both cached
+ * and uncached pgd's. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * The locking scheme was chosen on the basis of manfred's
+ * recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+LIST_HEAD(pgd_list);
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+	list_add(pgd_to_list(pgd), &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+	list_del(pgd_to_list(pgd));
+}
+
+#define KERNEL_PGD_INDEX_START pgd_index(PAGE_OFFSET)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - KERNEL_PGD_INDEX_START)
+
+static void pgd_ctor(pgd_t *pgd)
+{
+	unsigned long flags;
+
+	memset(pgd, 0, KERNEL_PGD_INDEX_START*sizeof(pgd_t));
+	spin_lock_irqsave(&pgd_lock, flags);
+
+#ifndef __tilegx__
+	/*
+	 * Check that the user interrupt vector has no L2.
+	 * It never should for the swapper, and new page tables
+	 * should always start with an empty user interrupt vector.
+	 */
+	BUG_ON(((u64 *)swapper_pg_dir)[pgd_index(MEM_USER_INTRPT)] != 0);
+#endif
+
+	clone_pgd_range(pgd + KERNEL_PGD_INDEX_START,
+			swapper_pg_dir + KERNEL_PGD_INDEX_START,
+			KERNEL_PGD_PTRS);
+
+	pgd_list_add(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+static void pgd_dtor(pgd_t *pgd)
+{
+	unsigned long flags; /* can be called from interrupt context */
+
+	spin_lock_irqsave(&pgd_lock, flags);
+	pgd_list_del(pgd);
+	spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = kmem_cache_alloc(pgd_cache, GFP_KERNEL);
+	if (pgd)
+		pgd_ctor(pgd);
+	return pgd;
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	pgd_dtor(pgd);
+	kmem_cache_free(pgd_cache, pgd);
+}
+
+
+#define L2_USER_PGTABLE_PAGES (1 << L2_USER_PGTABLE_ORDER)
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	gfp_t flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO|__GFP_COMP;
+	struct page *p;
+
+#ifdef CONFIG_HIGHPTE
+	flags |= __GFP_HIGHMEM;
+#endif
+
+	p = alloc_pages(flags, L2_USER_PGTABLE_ORDER);
+	if (p == NULL)
+		return NULL;
+
+	pgtable_page_ctor(p);
+	return p;
+}
+
+/*
+ * Free page immediately (used in __pte_alloc if we raced with another
+ * process).  We have to correct whatever pte_alloc_one() did before
+ * returning the pages to the allocator.
+ */
+void pte_free(struct mm_struct *mm, struct page *p)
+{
+	pgtable_page_dtor(p);
+	__free_pages(p, L2_USER_PGTABLE_ORDER);
+}
+
+void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+		    unsigned long address)
+{
+	int i;
+
+	pgtable_page_dtor(pte);
+	tlb->need_flush = 1;
+	if (tlb_fast_mode(tlb)) {
+		struct page *pte_pages[L2_USER_PGTABLE_PAGES];
+		for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i)
+			pte_pages[i] = pte + i;
+		free_pages_and_swap_cache(pte_pages, L2_USER_PGTABLE_PAGES);
+		return;
+	}
+	for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) {
+		tlb->pages[tlb->nr++] = pte + i;
+		if (tlb->nr >= FREE_PTE_NR)
+			tlb_flush_mmu(tlb, 0, 0);
+	}
+}
+
+#ifndef __tilegx__
+
+/*
+ * FIXME: needs to be atomic vs hypervisor writes.  For now we make the
+ * window of vulnerability a bit smaller by doing an unlocked 8-bit update.
+ */
+int ptep_test_and_clear_young(struct vm_area_struct *vma,
+			      unsigned long addr, pte_t *ptep)
+{
+#if HV_PTE_INDEX_ACCESSED < 8 || HV_PTE_INDEX_ACCESSED >= 16
+# error Code assumes HV_PTE "accessed" bit in second byte
+#endif
+	u8 *tmp = (u8 *)ptep;
+	u8 second_byte = tmp[1];
+	if (!(second_byte & (1 << (HV_PTE_INDEX_ACCESSED - 8))))
+		return 0;
+	tmp[1] = second_byte & ~(1 << (HV_PTE_INDEX_ACCESSED - 8));
+	return 1;
+}
+
+/*
+ * This implementation is atomic vs hypervisor writes, since the hypervisor
+ * always writes the low word (where "accessed" and "dirty" are) and this
+ * routine only writes the high word.
+ */
+void ptep_set_wrprotect(struct mm_struct *mm,
+			unsigned long addr, pte_t *ptep)
+{
+#if HV_PTE_INDEX_WRITABLE < 32
+# error Code assumes HV_PTE "writable" bit in high word
+#endif
+	u32 *tmp = (u32 *)ptep;
+	tmp[1] = tmp[1] & ~(1 << (HV_PTE_INDEX_WRITABLE - 32));
+}
+
+#endif
+
+pte_t *virt_to_pte(struct mm_struct* mm, unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+
+	if (pgd_addr_invalid(addr))
+		return NULL;
+
+	pgd = mm ? pgd_offset(mm, addr) : swapper_pg_dir + pgd_index(addr);
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud))
+		return NULL;
+	pmd = pmd_offset(pud, addr);
+	if (pmd_huge_page(*pmd))
+		return (pte_t *)pmd;
+	if (!pmd_present(*pmd))
+		return NULL;
+	return pte_offset_kernel(pmd, addr);
+}
+
+pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu)
+{
+	unsigned int width = smp_width;
+	int x = cpu % width;
+	int y = cpu / width;
+	BUG_ON(y >= smp_height);
+	BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3);
+	BUG_ON(cpu < 0 || cpu >= NR_CPUS);
+	BUG_ON(!cpu_is_valid_lotar(cpu));
+	return hv_pte_set_lotar(prot, HV_XY_TO_LOTAR(x, y));
+}
+
+int get_remote_cache_cpu(pgprot_t prot)
+{
+	HV_LOTAR lotar = hv_pte_get_lotar(prot);
+	int x = HV_LOTAR_X(lotar);
+	int y = HV_LOTAR_Y(lotar);
+	BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3);
+	return x + y * smp_width;
+}
+
+void set_pte_order(pte_t *ptep, pte_t pte, int order)
+{
+	unsigned long pfn = pte_pfn(pte);
+	struct page *page = pfn_to_page(pfn);
+
+	/* Update the home of a PTE if necessary */
+	pte = pte_set_home(pte, page_home(page));
+
+#ifdef __tilegx__
+	*ptep = pte;
+#else
+	/*
+	 * When setting a PTE, write the high bits first, then write
+	 * the low bits.  This sets the "present" bit only after the
+	 * other bits are in place.  If a particular PTE update
+	 * involves transitioning from one valid PTE to another, it
+	 * may be necessary to call set_pte_order() more than once,
+	 * transitioning via a suitable intermediate state.
+	 * Note that this sequence also means that if we are transitioning
+	 * from any migrating PTE to a non-migrating one, we will not
+	 * see a half-updated PTE with the migrating bit off.
+	 */
+#if HV_PTE_INDEX_PRESENT >= 32 || HV_PTE_INDEX_MIGRATING >= 32
+# error Must write the present and migrating bits last
+#endif
+	((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32);
+	barrier();
+	((u32 *)ptep)[0] = (u32)(pte_val(pte));
+#endif
+}
+
+/* Can this mm load a PTE with cached_priority set? */
+static inline int mm_is_priority_cached(struct mm_struct *mm)
+{
+	return mm->context.priority_cached;
+}
+
+/*
+ * Add a priority mapping to an mm_context and
+ * notify the hypervisor if this is the first one.
+ */
+void start_mm_caching(struct mm_struct *mm)
+{
+	if (!mm_is_priority_cached(mm)) {
+		mm->context.priority_cached = -1U;
+		hv_set_caching(-1U);
+	}
+}
+
+/*
+ * Validate and return the priority_cached flag.  We know if it's zero
+ * that we don't need to scan, since we immediately set it non-zero
+ * when we first consider a MAP_CACHE_PRIORITY mapping.
+ *
+ * We only _try_ to acquire the mmap_sem semaphore; if we can't acquire it,
+ * since we're in an interrupt context (servicing switch_mm) we don't
+ * worry about it and don't unset the "priority_cached" field.
+ * Presumably we'll come back later and have more luck and clear
+ * the value then; for now we'll just keep the cache marked for priority.
+ */
+static unsigned int update_priority_cached(struct mm_struct *mm)
+{
+	if (mm->context.priority_cached && down_write_trylock(&mm->mmap_sem)) {
+		struct vm_area_struct *vm;
+		for (vm = mm->mmap; vm; vm = vm->vm_next) {
+			if (hv_pte_get_cached_priority(vm->vm_page_prot))
+				break;
+		}
+		if (vm == NULL)
+			mm->context.priority_cached = 0;
+		up_write(&mm->mmap_sem);
+	}
+	return mm->context.priority_cached;
+}
+
+/* Set caching correctly for an mm that we are switching to. */
+void check_mm_caching(struct mm_struct *prev, struct mm_struct *next)
+{
+	if (!mm_is_priority_cached(next)) {
+		/*
+		 * If the new mm doesn't use priority caching, just see if we
+		 * need the hv_set_caching(), or can assume it's already zero.
+		 */
+		if (mm_is_priority_cached(prev))
+			hv_set_caching(0);
+	} else {
+		hv_set_caching(update_priority_cached(next));
+	}
+}
+
+#if CHIP_HAS_MMIO()
+
+/* Map an arbitrary MMIO address, homed according to pgprot, into VA space. */
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+			   pgprot_t home)
+{
+	void *addr;
+	struct vm_struct *area;
+	unsigned long offset, last_addr;
+	pgprot_t pgprot;
+
+	/* Don't allow wraparound or zero size */
+	last_addr = phys_addr + size - 1;
+	if (!size || last_addr < phys_addr)
+		return NULL;
+
+	/* Create a read/write, MMIO VA mapping homed at the requested shim. */
+	pgprot = PAGE_KERNEL;
+	pgprot = hv_pte_set_mode(pgprot, HV_PTE_MODE_MMIO);
+	pgprot = hv_pte_set_lotar(pgprot, hv_pte_get_lotar(home));
+
+	/*
+	 * Mappings have to be page-aligned
+	 */
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
+	size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+	/*
+	 * Ok, go for it..
+	 */
+	area = get_vm_area(size, VM_IOREMAP /* | other flags? */);
+	if (!area)
+		return NULL;
+	area->phys_addr = phys_addr;
+	addr = area->addr;
+	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+			       phys_addr, pgprot)) {
+		remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr));
+		return NULL;
+	}
+	return (__force void __iomem *) (offset + (char *)addr);
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+/* Map a PCI MMIO bus address into VA space. */
+void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
+{
+	panic("ioremap for PCI MMIO is not supported");
+}
+EXPORT_SYMBOL(ioremap);
+
+/* Unmap an MMIO VA mapping. */
+void iounmap(volatile void __iomem *addr_in)
+{
+	volatile void __iomem *addr = (volatile void __iomem *)
+		(PAGE_MASK & (unsigned long __force)addr_in);
+#if 1
+	vunmap((void * __force)addr);
+#else
+	/* x86 uses this complicated flow instead of vunmap().  Is
+	 * there any particular reason we should do the same? */
+	struct vm_struct *p, *o;
+
+	/* Use the vm area unlocked, assuming the caller
+	   ensures there isn't another iounmap for the same address
+	   in parallel. Reuse of the virtual address is prevented by
+	   leaving it in the global lists until we're done with it.
+	   cpa takes care of the direct mappings. */
+	read_lock(&vmlist_lock);
+	for (p = vmlist; p; p = p->next) {
+		if (p->addr == addr)
+			break;
+	}
+	read_unlock(&vmlist_lock);
+
+	if (!p) {
+		pr_err("iounmap: bad address %p\n", addr);
+		dump_stack();
+		return;
+	}
+
+	/* Finally remove it */
+	o = remove_vm_area((void *)addr);
+	BUG_ON(p != o || o == NULL);
+	kfree(p);
+#endif
+}
+EXPORT_SYMBOL(iounmap);
+
+#endif /* CHIP_HAS_MMIO() */
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 0d207e73a75..7c8e277f6d3 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -55,10 +55,6 @@ config GENERIC_BUG
 	default y
 	depends on BUG
 
-config GENERIC_TIME
-	bool
-	default y
-
 config GENERIC_CLOCKEVENTS
 	bool
 	default y
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 6e51424745a..25e1965df7c 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -210,9 +210,9 @@ void free_irqs(void)
 	list_for_each(ele, &list) {
 		chan = list_entry(ele, struct chan, free_list);
 
-		if (chan->input)
+		if (chan->input && chan->enabled)
 			free_irq(chan->line->driver->read_irq, chan);
-		if (chan->output)
+		if (chan->output && chan->enabled)
 			free_irq(chan->line->driver->write_irq, chan);
 		chan->enabled = 0;
 	}
@@ -231,9 +231,9 @@ static void close_one_chan(struct chan *chan, int delay_free_irq)
 		spin_unlock_irqrestore(&irqs_to_free_lock, flags);
 	}
 	else {
-		if (chan->input)
+		if (chan->input && chan->enabled)
 			free_irq(chan->line->driver->read_irq, chan);
-		if (chan->output)
+		if (chan->output && chan->enabled)
 			free_irq(chan->line->driver->write_irq, chan);
 		chan->enabled = 0;
 	}
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ae42695c359..68142df7660 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -8,6 +8,7 @@
 #include "linux/slab.h"
 #include "linux/sound.h"
 #include "linux/soundcard.h"
+#include "linux/smp_lock.h"
 #include "asm/uaccess.h"
 #include "init.h"
 #include "os.h"
@@ -198,7 +199,10 @@ static int hostaudio_open(struct inode *inode, struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		w = 1;
 
+	lock_kernel();
 	ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0);
+	unlock_kernel();
+
 	if (ret < 0) {
 		kfree(state);
 		return ret;
@@ -254,7 +258,9 @@ static int hostmixer_open_mixdev(struct inode *inode, struct file *file)
 	if (file->f_mode & FMODE_WRITE)
 		w = 1;
 
+	lock_kernel();
 	ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0);
+	unlock_kernel();
 
 	if (ret < 0) {
 		printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', "
diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h
index 084de4a9fc7..0032f9212e7 100644
--- a/arch/um/include/asm/pgtable-3level.h
+++ b/arch/um/include/asm/pgtable-3level.h
@@ -60,7 +60,7 @@
 	set_pud(pud, __pud(_PAGE_TABLE + __pa(pmd)))
 
 #ifdef CONFIG_64BIT
-#define set_pud(pudptr, pudval) set_64bit((phys_t *) (pudptr), pud_val(pudval))
+#define set_pud(pudptr, pudval) set_64bit((u64 *) (pudptr), pud_val(pudval))
 #else
 #define set_pud(pudptr, pudval) (*(pudptr) = (pudval))
 #endif
@@ -73,7 +73,7 @@ static inline int pgd_newpage(pgd_t pgd)
 static inline void pgd_mkuptodate(pgd_t pgd) { pgd_val(pgd) &= ~_PAGE_NEWPAGE; }
 
 #ifdef CONFIG_64BIT
-#define set_pmd(pmdptr, pmdval) set_64bit((phys_t *) (pmdptr), pmd_val(pmdval))
+#define set_pmd(pmdptr, pmdval) set_64bit((u64 *) (pmdptr), pmd_val(pmdval))
 #else
 #define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
 #endif
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 484509948ee..e0510496596 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -7,9 +7,6 @@
 #include "linux/ptrace.h"
 #include "linux/sched.h"
 #include "asm/uaccess.h"
-#ifdef CONFIG_PROC_MM
-#include "proc_mm.h"
-#endif
 #include "skas_ptrace.h"
 
 
@@ -158,24 +155,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 #endif
-#ifdef CONFIG_PROC_MM
-	case PTRACE_SWITCH_MM: {
-		struct mm_struct *old = child->mm;
-		struct mm_struct *new = proc_mm_get_mm(data);
-
-		if (IS_ERR(new)) {
-			ret = PTR_ERR(new);
-			break;
-		}
-
-		atomic_inc(&new->mm_users);
-		child->mm = new;
-		child->active_mm = new;
-		mmput(old);
-		ret = 0;
-		break;
-	}
-#endif
 #ifdef PTRACE_ARCH_PRCTL
 	case PTRACE_ARCH_PRCTL:
 		/* XXX Calls ptrace on the host - needs some SMP thinking */
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c8b9c469fcd..a08d9fab81f 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -102,16 +102,16 @@ static void __init setup_itimer(void)
 	clockevents_register_device(&itimer_clockevent);
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
-	long long nsecs;
-
-	timer_init();
+	long long nsecs = os_nsecs();
 
-	nsecs = os_nsecs();
-	set_normalized_timespec(&wall_to_monotonic, -nsecs / NSEC_PER_SEC,
-				-nsecs % NSEC_PER_SEC);
-	set_normalized_timespec(&xtime, nsecs / NSEC_PER_SEC,
+	set_normalized_timespec(ts, nsecs / NSEC_PER_SEC,
 				nsecs % NSEC_PER_SEC);
+}
+
+void __init time_init(void)
+{
+	timer_init();
 	late_time_init = setup_itimer;
 }
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index dcb0593b4a6..a84fc34c8f7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -55,6 +55,7 @@ config X86
 	select HAVE_HW_BREAKPOINT
 	select HAVE_MIXED_BREAKPOINTS_REGS
 	select PERF_EVENTS
+	select HAVE_PERF_EVENTS_NMI
 	select ANON_INODES
 	select HAVE_ARCH_KMEMCHECK
 	select HAVE_USER_RETURN_NOTIFIER
@@ -72,9 +73,6 @@ config ARCH_DEFCONFIG
 	default "arch/x86/configs/i386_defconfig" if X86_32
 	default "arch/x86/configs/x86_64_defconfig" if X86_64
 
-config GENERIC_TIME
-	def_bool y
-
 config GENERIC_CMOS_UPDATE
 	def_bool y
 
@@ -2046,7 +2044,7 @@ config SCx200
 
 config SCx200HR_TIMER
 	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
-	depends on SCx200 && GENERIC_TIME
+	depends on SCx200
 	default y
 	---help---
 	  This driver provides a clocksource built upon the on-chip
@@ -2062,6 +2060,15 @@ config OLPC
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
 
+config OLPC_OPENFIRMWARE
+	bool "Support for OLPC's Open Firmware"
+	depends on !X86_64 && !X86_PAE
+	default y if OLPC
+	help
+	  This option adds support for the implementation of Open Firmware
+	  that is used on the OLPC XO-1 Children's Machine.
+	  If unsure, say N here.
+
 endif # X86_32
 
 config K8_NB
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index ec749c2bfdd..f7cb086b4ad 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -26,10 +26,10 @@ targets		:= vmlinux.bin setup.bin setup.elf bzImage
 targets		+= fdimage fdimage144 fdimage288 image.iso mtools.conf
 subdir-		:= compressed
 
-setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o edd.o
-setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o regs.o string.o tty.o video.o video-mode.o
-setup-y		+= version.o
+setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o
+setup-y		+= early_serial_console.o edd.o header.o main.o mca.o memory.o
+setup-y		+= pm.o pmjump.o printf.o regs.o string.o tty.o video.o
+setup-y		+= video-mode.o version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
 
 # The link order of the video-*.o modules can matter.  In particular,
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 98239d2658f..c7093bd9f2d 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -28,6 +28,7 @@
 #include "bitops.h"
 #include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
+#include "ctype.h"
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
@@ -37,6 +38,8 @@
 extern struct setup_header hdr;
 extern struct boot_params boot_params;
 
+#define cpu_relax()	asm volatile("rep; nop")
+
 /* Basic port I/O */
 static inline void outb(u8 v, u16 port)
 {
@@ -198,11 +201,6 @@ static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
 	return diff;
 }
 
-static inline int isdigit(int ch)
-{
-	return (ch >= '0') && (ch <= '9');
-}
-
 /* Heap -- available for dynamic lists. */
 extern char _end[];
 extern char *HEAP;
@@ -287,8 +285,18 @@ struct biosregs {
 void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg);
 
 /* cmdline.c */
-int cmdline_find_option(const char *option, char *buffer, int bufsize);
-int cmdline_find_option_bool(const char *option);
+int __cmdline_find_option(u32 cmdline_ptr, const char *option, char *buffer, int bufsize);
+int __cmdline_find_option_bool(u32 cmdline_ptr, const char *option);
+static inline int cmdline_find_option(const char *option, char *buffer, int bufsize)
+{
+	return __cmdline_find_option(boot_params.hdr.cmd_line_ptr, option, buffer, bufsize);
+}
+
+static inline int cmdline_find_option_bool(const char *option)
+{
+	return __cmdline_find_option_bool(boot_params.hdr.cmd_line_ptr, option);
+}
+
 
 /* cpu.c, cpucheck.c */
 struct cpu_features {
@@ -300,6 +308,10 @@ extern struct cpu_features cpu;
 int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
 int validate_cpu(void);
 
+/* early_serial_console.c */
+extern int early_serial_base;
+void console_init(void);
+
 /* edd.c */
 void query_edd(void);
 
@@ -329,8 +341,10 @@ void initregs(struct biosregs *regs);
 
 /* string.c */
 int strcmp(const char *str1, const char *str2);
+int strncmp(const char *cs, const char *ct, size_t count);
 size_t strnlen(const char *s, size_t maxlen);
 unsigned int atou(const char *s);
+unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base);
 
 /* tty.c */
 void puts(const char *);
diff --git a/arch/x86/boot/cmdline.c b/arch/x86/boot/cmdline.c
index a1d35634bce..6b3b6f708c0 100644
--- a/arch/x86/boot/cmdline.c
+++ b/arch/x86/boot/cmdline.c
@@ -27,9 +27,8 @@ static inline int myisspace(u8 c)
  * Returns the length of the argument (regardless of if it was
  * truncated to fit in the buffer), or -1 on not found.
  */
-int cmdline_find_option(const char *option, char *buffer, int bufsize)
+int __cmdline_find_option(u32 cmdline_ptr, const char *option, char *buffer, int bufsize)
 {
-	u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
 	addr_t cptr;
 	char c;
 	int len = -1;
@@ -100,9 +99,8 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize)
  * Returns the position of that option (starts counting with 1)
  * or 0 on not found
  */
-int cmdline_find_option_bool(const char *option)
+int __cmdline_find_option_bool(u32 cmdline_ptr, const char *option)
 {
-	u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
 	addr_t cptr;
 	char c;
 	int pos = 0, wstart = 0;
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index fbb47daf245..0c229551eea 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o piggy.o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -23,7 +23,7 @@ LDFLAGS_vmlinux := -T
 
 hostprogs-y	:= mkpiggy
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/string.o $(obj)/cmdline.o $(obj)/early_serial_console.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
diff --git a/arch/x86/boot/compressed/cmdline.c b/arch/x86/boot/compressed/cmdline.c
new file mode 100644
index 00000000000..cb62f786990
--- /dev/null
+++ b/arch/x86/boot/compressed/cmdline.c
@@ -0,0 +1,21 @@
+#include "misc.h"
+
+static unsigned long fs;
+static inline void set_fs(unsigned long seg)
+{
+	fs = seg << 4;  /* shift it back */
+}
+typedef unsigned long addr_t;
+static inline char rdfs8(addr_t addr)
+{
+	return *((char *)(fs + addr));
+}
+#include "../cmdline.c"
+int cmdline_find_option(const char *option, char *buffer, int bufsize)
+{
+	return __cmdline_find_option(real_mode->hdr.cmd_line_ptr, option, buffer, bufsize);
+}
+int cmdline_find_option_bool(const char *option)
+{
+	return __cmdline_find_option_bool(real_mode->hdr.cmd_line_ptr, option);
+}
diff --git a/arch/x86/boot/compressed/early_serial_console.c b/arch/x86/boot/compressed/early_serial_console.c
new file mode 100644
index 00000000000..261e81fb958
--- /dev/null
+++ b/arch/x86/boot/compressed/early_serial_console.c
@@ -0,0 +1,5 @@
+#include "misc.h"
+
+int early_serial_base;
+
+#include "../early_serial_console.c"
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index f543b70ffae..67a655a39ce 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -124,6 +124,19 @@ relocated:
 	rep	stosl
 
 /*
+ * Adjust our own GOT
+ */
+	leal	_got(%ebx), %edx
+	leal	_egot(%ebx), %ecx
+1:
+	cmpl	%ecx, %edx
+	jae	2f
+	addl	%ebx, (%edx)
+	addl	$4, %edx
+	jmp	1b
+2:
+
+/*
  * Do the decompression, and jump to the new kernel..
  */
 	leal	z_extract_offset_negative(%ebx), %ebp
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index faff0dc9c06..52f85a196fa 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -280,6 +280,19 @@ relocated:
 	rep	stosq
 
 /*
+ * Adjust our own GOT
+ */
+	leaq	_got(%rip), %rdx
+	leaq	_egot(%rip), %rcx
+1:
+	cmpq	%rcx, %rdx
+	jae	2f
+	addq	%rbx, (%rdx)
+	addq	$8, %rdx
+	jmp	1b
+2:
+	
+/*
  * Do the decompression, and jump to the new kernel..
  */
 	pushq	%rsi			/* Save the real mode argument */
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 51e240779a4..8f7bef8e9ff 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -9,23 +9,7 @@
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
 
-/*
- * we have to be careful, because no indirections are allowed here, and
- * paravirt_ops is a kind of one. As it will only run in baremetal anyway,
- * we just keep it from happening
- */
-#undef CONFIG_PARAVIRT
-#ifdef CONFIG_X86_32
-#define _ASM_X86_DESC_H 1
-#endif
-
-#include <linux/linkage.h>
-#include <linux/screen_info.h>
-#include <linux/elf.h>
-#include <linux/io.h>
-#include <asm/page.h>
-#include <asm/boot.h>
-#include <asm/bootparam.h>
+#include "misc.h"
 
 /* WARNING!!
  * This code is compiled with -fPIC and it is relocated dynamically
@@ -123,15 +107,13 @@ static void error(char *m);
 /*
  * This is set up by the setup-routine at boot-time
  */
-static struct boot_params *real_mode;		/* Pointer to real-mode data */
+struct boot_params *real_mode;		/* Pointer to real-mode data */
 static int quiet;
+static int debug;
 
 void *memset(void *s, int c, size_t n);
 void *memcpy(void *dest, const void *src, size_t n);
 
-static void __putstr(int, const char *);
-#define putstr(__x)  __putstr(0, __x)
-
 #ifdef CONFIG_X86_64
 #define memptr long
 #else
@@ -170,7 +152,21 @@ static void scroll(void)
 		vidmem[i] = ' ';
 }
 
-static void __putstr(int error, const char *s)
+#define XMTRDY          0x20
+
+#define TXR             0       /*  Transmit register (WRITE) */
+#define LSR             5       /*  Line Status               */
+static void serial_putchar(int ch)
+{
+	unsigned timeout = 0xffff;
+
+	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+		cpu_relax();
+
+	outb(ch, early_serial_base + TXR);
+}
+
+void __putstr(int error, const char *s)
 {
 	int x, y, pos;
 	char c;
@@ -179,6 +175,14 @@ static void __putstr(int error, const char *s)
 	if (!error)
 		return;
 #endif
+	if (early_serial_base) {
+		const char *str = s;
+		while (*str) {
+			if (*str == '\n')
+				serial_putchar('\r');
+			serial_putchar(*str++);
+		}
+	}
 
 	if (real_mode->screen_info.orig_video_mode == 0 &&
 	    lines == 0 && cols == 0)
@@ -305,8 +309,10 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 {
 	real_mode = rmode;
 
-	if (real_mode->hdr.loadflags & QUIET_FLAG)
+	if (cmdline_find_option_bool("quiet"))
 		quiet = 1;
+	if (cmdline_find_option_bool("debug"))
+		debug = 1;
 
 	if (real_mode->screen_info.orig_video_mode == 7) {
 		vidmem = (char *) 0xb0000;
@@ -319,6 +325,10 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	lines = real_mode->screen_info.orig_video_lines;
 	cols = real_mode->screen_info.orig_video_cols;
 
+	console_init();
+	if (debug)
+		putstr("early console in decompress_kernel\n");
+
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h
new file mode 100644
index 00000000000..3f19c81a620
--- /dev/null
+++ b/arch/x86/boot/compressed/misc.h
@@ -0,0 +1,39 @@
+#ifndef BOOT_COMPRESSED_MISC_H
+#define BOOT_COMPRESSED_MISC_H
+
+/*
+ * we have to be careful, because no indirections are allowed here, and
+ * paravirt_ops is a kind of one. As it will only run in baremetal anyway,
+ * we just keep it from happening
+ */
+#undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_32
+#define _ASM_X86_DESC_H 1
+#endif
+
+#include <linux/linkage.h>
+#include <linux/screen_info.h>
+#include <linux/elf.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/boot.h>
+#include <asm/bootparam.h>
+
+#define BOOT_BOOT_H
+#include "../ctype.h"
+
+/* misc.c */
+extern struct boot_params *real_mode;		/* Pointer to real-mode data */
+void __putstr(int error, const char *s);
+#define putstr(__x)  __putstr(0, __x)
+#define puts(__x)  __putstr(0, __x)
+
+/* cmdline.c */
+int cmdline_find_option(const char *option, char *buffer, int bufsize);
+int cmdline_find_option_bool(const char *option);
+
+/* early_serial_console.c */
+extern int early_serial_base;
+void console_init(void);
+
+#endif
diff --git a/arch/x86/boot/compressed/string.c b/arch/x86/boot/compressed/string.c
new file mode 100644
index 00000000000..19b3e693cd7
--- /dev/null
+++ b/arch/x86/boot/compressed/string.c
@@ -0,0 +1,2 @@
+#include "misc.h"
+#include "../string.c"
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index 5ddabceee12..34d047c9828 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -41,6 +41,12 @@ SECTIONS
 		*(.rodata.*)
 		_erodata = . ;
 	}
+	.got : {
+		_got = .;
+		KEEP(*(.got.plt))
+		KEEP(*(.got))
+		_egot = .;
+	}
 	.data :	{
 		_data = . ;
 		*(.data)
diff --git a/arch/x86/boot/ctype.h b/arch/x86/boot/ctype.h
new file mode 100644
index 00000000000..25e13403193
--- /dev/null
+++ b/arch/x86/boot/ctype.h
@@ -0,0 +1,21 @@
+#ifndef BOOT_ISDIGIT_H
+
+#define BOOT_ISDIGIT_H
+
+static inline int isdigit(int ch)
+{
+	return (ch >= '0') && (ch <= '9');
+}
+
+static inline int isxdigit(int ch)
+{
+	if (isdigit(ch))
+		return true;
+
+	if ((ch >= 'a') && (ch <= 'f'))
+		return true;
+
+	return (ch >= 'A') && (ch <= 'F');
+}
+
+#endif
diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c
new file mode 100644
index 00000000000..030f4b93e25
--- /dev/null
+++ b/arch/x86/boot/early_serial_console.c
@@ -0,0 +1,139 @@
+#include "boot.h"
+
+#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */
+
+#define XMTRDY          0x20
+
+#define DLAB		0x80
+
+#define TXR             0       /*  Transmit register (WRITE) */
+#define RXR             0       /*  Receive register  (READ)  */
+#define IER             1       /*  Interrupt Enable          */
+#define IIR             2       /*  Interrupt ID              */
+#define FCR             2       /*  FIFO control              */
+#define LCR             3       /*  Line control              */
+#define MCR             4       /*  Modem control             */
+#define LSR             5       /*  Line Status               */
+#define MSR             6       /*  Modem Status              */
+#define DLL             0       /*  Divisor Latch Low         */
+#define DLH             1       /*  Divisor latch High        */
+
+#define DEFAULT_BAUD 9600
+
+static void early_serial_init(int port, int baud)
+{
+	unsigned char c;
+	unsigned divisor;
+
+	outb(0x3, port + LCR);	/* 8n1 */
+	outb(0, port + IER);	/* no interrupt */
+	outb(0, port + FCR);	/* no fifo */
+	outb(0x3, port + MCR);	/* DTR + RTS */
+
+	divisor	= 115200 / baud;
+	c = inb(port + LCR);
+	outb(c | DLAB, port + LCR);
+	outb(divisor & 0xff, port + DLL);
+	outb((divisor >> 8) & 0xff, port + DLH);
+	outb(c & ~DLAB, port + LCR);
+
+	early_serial_base = port;
+}
+
+static void parse_earlyprintk(void)
+{
+	int baud = DEFAULT_BAUD;
+	char arg[32];
+	int pos = 0;
+	int port = 0;
+
+	if (cmdline_find_option("earlyprintk", arg, sizeof arg) > 0) {
+		char *e;
+
+		if (!strncmp(arg, "serial", 6)) {
+			port = DEFAULT_SERIAL_PORT;
+			pos += 6;
+		}
+
+		if (arg[pos] == ',')
+			pos++;
+
+		if (!strncmp(arg, "ttyS", 4)) {
+			static const int bases[] = { 0x3f8, 0x2f8 };
+			int idx = 0;
+
+			if (!strncmp(arg + pos, "ttyS", 4))
+				pos += 4;
+
+			if (arg[pos++] == '1')
+				idx = 1;
+
+			port = bases[idx];
+		}
+
+		if (arg[pos] == ',')
+			pos++;
+
+		baud = simple_strtoull(arg + pos, &e, 0);
+		if (baud == 0 || arg + pos == e)
+			baud = DEFAULT_BAUD;
+	}
+
+	if (port)
+		early_serial_init(port, baud);
+}
+
+#define BASE_BAUD (1843200/16)
+static unsigned int probe_baud(int port)
+{
+	unsigned char lcr, dll, dlh;
+	unsigned int quot;
+
+	lcr = inb(port + LCR);
+	outb(lcr | DLAB, port + LCR);
+	dll = inb(port + DLL);
+	dlh = inb(port + DLH);
+	outb(lcr, port + LCR);
+	quot = (dlh << 8) | dll;
+
+	return BASE_BAUD / quot;
+}
+
+static void parse_console_uart8250(void)
+{
+	char optstr[64], *options;
+	int baud = DEFAULT_BAUD;
+	int port = 0;
+
+	/*
+	 * console=uart8250,io,0x3f8,115200n8
+	 * need to make sure it is last one console !
+	 */
+	if (cmdline_find_option("console", optstr, sizeof optstr) <= 0)
+		return;
+
+	options = optstr;
+
+	if (!strncmp(options, "uart8250,io,", 12))
+		port = simple_strtoull(options + 12, &options, 0);
+	else if (!strncmp(options, "uart,io,", 8))
+		port = simple_strtoull(options + 8, &options, 0);
+	else
+		return;
+
+	if (options && (options[0] == ','))
+		baud = simple_strtoull(options + 1, &options, 0);
+	else
+		baud = probe_baud(port);
+
+	if (port)
+		early_serial_init(port, baud);
+}
+
+void console_init(void)
+{
+	parse_earlyprintk();
+
+	if (!early_serial_base)
+		parse_console_uart8250();
+}
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 140172b895b..40358c8905b 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -130,6 +130,11 @@ void main(void)
 	/* First, copy the boot header into the "zeropage" */
 	copy_boot_params();
 
+	/* Initialize the early-boot console */
+	console_init();
+	if (cmdline_find_option_bool("debug"))
+		puts("early console in setup code\n");
+
 	/* End of heap check */
 	init_heap();
 
@@ -168,10 +173,6 @@ void main(void)
 	/* Set the video mode */
 	set_video();
 
-	/* Parse command line for 'quiet' and pass it to decompressor. */
-	if (cmdline_find_option_bool("quiet"))
-		boot_params.hdr.loadflags |= QUIET_FLAG;
-
 	/* Do the last things and invoke protected mode */
 	go_to_protected_mode();
 }
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index 50e47cdbddd..cdac91ca55d 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -34,7 +34,7 @@ static int skip_atoi(const char **s)
 #define SMALL	32		/* Must be 32 == 0x20 */
 #define SPECIAL	64		/* 0x */
 
-#define do_div(n,base) ({ \
+#define __do_div(n, base) ({ \
 int __res; \
 __res = ((unsigned long) n) % (unsigned) base; \
 n = ((unsigned long) n) / (unsigned) base; \
@@ -83,7 +83,7 @@ static char *number(char *str, long num, int base, int size, int precision,
 		tmp[i++] = '0';
 	else
 		while (num != 0)
-			tmp[i++] = (digits[do_div(num, base)] | locase);
+			tmp[i++] = (digits[__do_div(num, base)] | locase);
 	if (i > precision)
 		precision = i;
 	size -= precision;
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index f94b7a0c2ab..3cbc4058dd2 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -30,6 +30,22 @@ int strcmp(const char *str1, const char *str2)
 	return 0;
 }
 
+int strncmp(const char *cs, const char *ct, size_t count)
+{
+	unsigned char c1, c2;
+
+	while (count) {
+		c1 = *cs++;
+		c2 = *ct++;
+		if (c1 != c2)
+			return c1 < c2 ? -1 : 1;
+		if (!c1)
+			break;
+		count--;
+	}
+	return 0;
+}
+
 size_t strnlen(const char *s, size_t maxlen)
 {
 	const char *es = s;
@@ -48,3 +64,50 @@ unsigned int atou(const char *s)
 		i = i * 10 + (*s++ - '0');
 	return i;
 }
+
+/* Works only for digits and letters, but small and fast */
+#define TOLOWER(x) ((x) | 0x20)
+
+static unsigned int simple_guess_base(const char *cp)
+{
+	if (cp[0] == '0') {
+		if (TOLOWER(cp[1]) == 'x' && isxdigit(cp[2]))
+			return 16;
+		else
+			return 8;
+	} else {
+		return 10;
+	}
+}
+
+/**
+ * simple_strtoull - convert a string to an unsigned long long
+ * @cp: The start of the string
+ * @endp: A pointer to the end of the parsed string will be placed here
+ * @base: The number base to use
+ */
+
+unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base)
+{
+	unsigned long long result = 0;
+
+	if (!base)
+		base = simple_guess_base(cp);
+
+	if (base == 16 && cp[0] == '0' && TOLOWER(cp[1]) == 'x')
+		cp += 2;
+
+	while (isxdigit(*cp)) {
+		unsigned int value;
+
+		value = isdigit(*cp) ? *cp - '0' : TOLOWER(*cp) - 'a' + 10;
+		if (value >= base)
+			break;
+		result = result * base + value;
+		cp++;
+	}
+	if (endp)
+		*endp = (char *)cp;
+
+	return result;
+}
diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index 01ec69c901c..def2451f46a 100644
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -10,23 +10,36 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * Very simple screen I/O
- * XXX: Probably should add very simple serial I/O?
+ * Very simple screen and serial I/O
  */
 
 #include "boot.h"
 
+int early_serial_base;
+
+#define XMTRDY          0x20
+
+#define TXR             0       /*  Transmit register (WRITE) */
+#define LSR             5       /*  Line Status               */
+
 /*
  * These functions are in .inittext so they can be used to signal
  * error during initialization.
  */
 
-void __attribute__((section(".inittext"))) putchar(int ch)
+static void __attribute__((section(".inittext"))) serial_putchar(int ch)
 {
-	struct biosregs ireg;
+	unsigned timeout = 0xffff;
 
-	if (ch == '\n')
-		putchar('\r');	/* \n -> \r\n */
+	while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
+		cpu_relax();
+
+	outb(ch, early_serial_base + TXR);
+}
+
+static void __attribute__((section(".inittext"))) bios_putchar(int ch)
+{
+	struct biosregs ireg;
 
 	initregs(&ireg);
 	ireg.bx = 0x0007;
@@ -36,6 +49,17 @@ void __attribute__((section(".inittext"))) putchar(int ch)
 	intcall(0x10, &ireg, NULL);
 }
 
+void __attribute__((section(".inittext"))) putchar(int ch)
+{
+	if (ch == '\n')
+		putchar('\r');	/* \n -> \r\n */
+
+	bios_putchar(ch);
+
+	if (early_serial_base != 0)
+		serial_putchar(ch);
+}
+
 void __attribute__((section(".inittext"))) puts(const char *str)
 {
 	while (*str)
@@ -112,3 +136,4 @@ int getchar_timeout(void)
 
 	return 0;		/* Timeout! */
 }
+
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index d28fad19654..e3a32431ca1 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1471,6 +1471,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_PKGTEMP is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 6c86acd847a..4251f837205 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1456,6 +1456,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_PKGTEMP is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index aa2c39d968f..92091de1111 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -134,7 +134,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 	    boot_cpu_data.x86_model <= 0x05 &&
 	    boot_cpu_data.x86_mask < 0x0A)
 		return 1;
-	else if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	else if (c1e_detected)
 		return 1;
 	else
 		return max_cstate;
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 03b6bb5394a..bc6abb7bc7e 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -45,10 +45,9 @@
 struct alt_instr {
 	u8 *instr;		/* original instruction */
 	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
+	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
 #ifdef CONFIG_X86_64
 	u32 pad2;
 #endif
@@ -86,9 +85,11 @@ static inline int alternatives_text_reserved(void *start, void *end)
       _ASM_ALIGN "\n"							\
       _ASM_PTR "661b\n"				/* label           */	\
       _ASM_PTR "663f\n"				/* new instruction */	\
-      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .discard,\"aw\",@progbits\n"				\
       "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
index c74a2eebe57..a69b1ac9eaf 100644
--- a/arch/x86/include/asm/apb_timer.h
+++ b/arch/x86/include/asm/apb_timer.h
@@ -55,7 +55,6 @@ extern unsigned long apbt_quick_calibrate(void);
 extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu);
 extern void apbt_setup_secondary_clock(void);
 extern unsigned int boot_cpu_id;
-extern int disable_apbt_percpu;
 
 extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint);
 extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr);
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 6be33d83c71..8e6218550e7 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -70,6 +70,14 @@ struct sys_desc_table {
 	__u8  table[14];
 };
 
+/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
+struct olpc_ofw_header {
+	__u32 ofw_magic;	/* OFW signature */
+	__u32 ofw_version;
+	__u32 cif_handler;	/* callback into OFW */
+	__u32 irq_desc_table;
+} __attribute__((packed));
+
 struct efi_info {
 	__u32 efi_loader_signature;
 	__u32 efi_systab;
@@ -92,7 +100,8 @@ struct boot_params {
 	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
 	__u8  hd1_info[16];	/* obsolete! */		/* 0x090 */
 	struct sys_desc_table sys_desc_table;		/* 0x0a0 */
-	__u8  _pad4[144];				/* 0x0b0 */
+	struct olpc_ofw_header olpc_ofw_header;		/* 0x0b0 */
+	__u8  _pad4[128];				/* 0x0c0 */
 	struct edid_info edid_info;			/* 0x140 */
 	struct efi_info efi_info;			/* 0x1c0 */
 	__u32 alt_mem_k;				/* 0x1e0 */
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 8859e12dd3c..284a6e8f7ce 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -11,38 +11,42 @@
 extern void __xchg_wrong_size(void);
 
 /*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
+ * Since this is generally used to protect other memory information, we
+ * use "asm volatile" and "memory" clobbers to prevent gcc from moving
+ * information around.
  */
-
-struct __xchg_dummy {
-	unsigned long a[100];
-};
-#define __xg(x) ((struct __xchg_dummy *)(x))
-
 #define __xchg(x, ptr, size)						\
 ({									\
 	__typeof(*(ptr)) __x = (x);					\
 	switch (size) {							\
 	case 1:								\
-		asm volatile("xchgb %b0,%1"				\
-			     : "=q" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+	{								\
+		volatile u8 *__ptr = (volatile u8 *)(ptr);		\
+		asm volatile("xchgb %0,%1"				\
+			     : "=q" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 2:								\
-		asm volatile("xchgw %w0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+	{								\
+		volatile u16 *__ptr = (volatile u16 *)(ptr);		\
+		asm volatile("xchgw %0,%1"				\
+			     : "=r" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 4:								\
+	{								\
+		volatile u32 *__ptr = (volatile u32 *)(ptr);		\
 		asm volatile("xchgl %0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	default:							\
 		__xchg_wrong_size();					\
 	}								\
@@ -53,60 +57,33 @@ struct __xchg_dummy {
 	__xchg((v), (ptr), sizeof(*ptr))
 
 /*
- * The semantics of XCHGCMP8B are a bit strange, this is why
- * there is a loop and the loading of %%eax and %%edx has to
- * be inside. This inlines well in most cases, the cached
- * cost is around ~38 cycles. (in the future we might want
- * to do an SIMD/3DNOW!/MMX/FPU 64-bit store here, but that
- * might have an implicit FPU-save as a cost, so it's not
- * clear which path to go.)
+ * CMPXCHG8B only writes to the target if we had the previous
+ * value in registers, otherwise it acts as a read and gives us the
+ * "new previous" value.  That is why there is a loop.  Preloading
+ * EDX:EAX is a performance optimization: in the common case it means
+ * we need only one locked operation.
  *
- * cmpxchg8b must be used with the lock prefix here to allow
- * the instruction to be executed atomically, see page 3-102
- * of the instruction set reference 24319102.pdf. We need
- * the reader side to see the coherent 64bit value.
+ * A SIMD/3DNOW!/MMX/FPU 64-bit store here would require at the very
+ * least an FPU save and/or %cr0.ts manipulation.
+ *
+ * cmpxchg8b must be used with the lock prefix here to allow the
+ * instruction to be executed atomically.  We need to have the reader
+ * side to see the coherent 64bit value.
  */
-static inline void __set_64bit(unsigned long long *ptr,
-			       unsigned int low, unsigned int high)
+static inline void set_64bit(volatile u64 *ptr, u64 value)
 {
+	u32 low  = value;
+	u32 high = value >> 32;
+	u64 prev = *ptr;
+
 	asm volatile("\n1:\t"
-		     "movl (%0), %%eax\n\t"
-		     "movl 4(%0), %%edx\n\t"
-		     LOCK_PREFIX "cmpxchg8b (%0)\n\t"
+		     LOCK_PREFIX "cmpxchg8b %0\n\t"
 		     "jnz 1b"
-		     : /* no outputs */
-		     : "D"(ptr),
-		       "b"(low),
-		       "c"(high)
-		     : "ax", "dx", "memory");
-}
-
-static inline void __set_64bit_constant(unsigned long long *ptr,
-					unsigned long long value)
-{
-	__set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32));
-}
-
-#define ll_low(x)	*(((unsigned int *)&(x)) + 0)
-#define ll_high(x)	*(((unsigned int *)&(x)) + 1)
-
-static inline void __set_64bit_var(unsigned long long *ptr,
-				   unsigned long long value)
-{
-	__set_64bit(ptr, ll_low(value), ll_high(value));
+		     : "=m" (*ptr), "+A" (prev)
+		     : "b" (low), "c" (high)
+		     : "memory");
 }
 
-#define set_64bit(ptr, value)			\
-	(__builtin_constant_p((value))		\
-	 ? __set_64bit_constant((ptr), (value))	\
-	 : __set_64bit_var((ptr), (value)))
-
-#define _set_64bit(ptr, value)						\
-	(__builtin_constant_p(value)					\
-	 ? __set_64bit(ptr, (unsigned int)(value),			\
-		       (unsigned int)((value) >> 32))			\
-	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
-
 extern void __cmpxchg_wrong_size(void);
 
 /*
@@ -121,23 +98,32 @@ extern void __cmpxchg_wrong_size(void);
 	__typeof__(*(ptr)) __new = (new);				\
 	switch (size) {							\
 	case 1:								\
-		asm volatile(lock "cmpxchgb %b1,%2"			\
-			     : "=a"(__ret)				\
-			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u8 *__ptr = (volatile u8 *)(ptr);		\
+		asm volatile(lock "cmpxchgb %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "q" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 2:								\
-		asm volatile(lock "cmpxchgw %w1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u16 *__ptr = (volatile u16 *)(ptr);		\
+		asm volatile(lock "cmpxchgw %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 4:								\
-		asm volatile(lock "cmpxchgl %1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u32 *__ptr = (volatile u32 *)(ptr);		\
+		asm volatile(lock "cmpxchgl %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	default:							\
 		__cmpxchg_wrong_size();					\
 	}								\
@@ -175,32 +161,28 @@ extern void __cmpxchg_wrong_size(void);
 					       (unsigned long long)(n)))
 #endif
 
-static inline unsigned long long __cmpxchg64(volatile void *ptr,
-					     unsigned long long old,
-					     unsigned long long new)
+static inline u64 __cmpxchg64(volatile u64 *ptr, u64 old, u64 new)
 {
-	unsigned long long prev;
-	asm volatile(LOCK_PREFIX "cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
+	u64 prev;
+	asm volatile(LOCK_PREFIX "cmpxchg8b %1"
+		     : "=A" (prev),
+		       "+m" (*ptr)
+		     : "b" ((u32)new),
+		       "c" ((u32)(new >> 32)),
+		       "0" (old)
 		     : "memory");
 	return prev;
 }
 
-static inline unsigned long long __cmpxchg64_local(volatile void *ptr,
-						   unsigned long long old,
-						   unsigned long long new)
+static inline u64 __cmpxchg64_local(volatile u64 *ptr, u64 old, u64 new)
 {
-	unsigned long long prev;
-	asm volatile("cmpxchg8b %3"
-		     : "=A"(prev)
-		     : "b"((unsigned long)new),
-		       "c"((unsigned long)(new >> 32)),
-		       "m"(*__xg(ptr)),
-		       "0"(old)
+	u64 prev;
+	asm volatile("cmpxchg8b %1"
+		     : "=A" (prev),
+		       "+m" (*ptr)
+		     : "b" ((u32)new),
+		       "c" ((u32)(new >> 32)),
+		       "0" (old)
 		     : "memory");
 	return prev;
 }
@@ -264,8 +246,6 @@ static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
  * to simulate the cmpxchg8b on the 80386 and 80486 CPU.
  */
 
-extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
-
 #define cmpxchg64(ptr, o, n)					\
 ({								\
 	__typeof__(*(ptr)) __ret;				\
@@ -283,20 +263,20 @@ extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 	__ret; })
 
 
-
-#define cmpxchg64_local(ptr, o, n)					\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64_local((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
+#define cmpxchg64_local(ptr, o, n)				\
+({								\
+	__typeof__(*(ptr)) __ret;				\
+	__typeof__(*(ptr)) __old = (o);				\
+	__typeof__(*(ptr)) __new = (n);				\
+	alternative_io("call cmpxchg8b_emu",			\
+		       "cmpxchg8b (%%esi)" ,			\
+		       X86_FEATURE_CX8,				\
+		       "=A" (__ret),				\
+		       "S" ((ptr)), "0" (__old),		\
+		       "b" ((unsigned int)__new),		\
+		       "c" ((unsigned int)(__new>>32))		\
+		       : "memory");				\
+	__ret; })
 
 #endif
 
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 485ae415fae..423ae58aa02 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -3,51 +3,60 @@
 
 #include <asm/alternative.h> /* Provides LOCK_PREFIX */
 
-#define __xg(x) ((volatile long *)(x))
-
-static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
+static inline void set_64bit(volatile u64 *ptr, u64 val)
 {
 	*ptr = val;
 }
 
-#define _set_64bit set_64bit
-
 extern void __xchg_wrong_size(void);
 extern void __cmpxchg_wrong_size(void);
 
 /*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway.
+ * Since this is generally used to protect other memory information, we
+ * use "asm volatile" and "memory" clobbers to prevent gcc from moving
+ * information around.
  */
 #define __xchg(x, ptr, size)						\
 ({									\
 	__typeof(*(ptr)) __x = (x);					\
 	switch (size) {							\
 	case 1:								\
-		asm volatile("xchgb %b0,%1"				\
-			     : "=q" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+	{								\
+		volatile u8 *__ptr = (volatile u8 *)(ptr);		\
+		asm volatile("xchgb %0,%1"				\
+			     : "=q" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 2:								\
-		asm volatile("xchgw %w0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+	{								\
+		volatile u16 *__ptr = (volatile u16 *)(ptr);		\
+		asm volatile("xchgw %0,%1"				\
+			     : "=r" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 4:								\
-		asm volatile("xchgl %k0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+	{								\
+		volatile u32 *__ptr = (volatile u32 *)(ptr);		\
+		asm volatile("xchgl %0,%1"				\
+			     : "=r" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 8:								\
+	{								\
+		volatile u64 *__ptr = (volatile u64 *)(ptr);		\
 		asm volatile("xchgq %0,%1"				\
-			     : "=r" (__x)				\
-			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "=r" (__x), "+m" (*__ptr)		\
+			     : "0" (__x)				\
 			     : "memory");				\
 		break;							\
+	}								\
 	default:							\
 		__xchg_wrong_size();					\
 	}								\
@@ -71,29 +80,41 @@ extern void __cmpxchg_wrong_size(void);
 	__typeof__(*(ptr)) __new = (new);				\
 	switch (size) {							\
 	case 1:								\
-		asm volatile(lock "cmpxchgb %b1,%2"			\
-			     : "=a"(__ret)				\
-			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u8 *__ptr = (volatile u8 *)(ptr);		\
+		asm volatile(lock "cmpxchgb %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "q" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 2:								\
-		asm volatile(lock "cmpxchgw %w1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u16 *__ptr = (volatile u16 *)(ptr);		\
+		asm volatile(lock "cmpxchgw %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 4:								\
-		asm volatile(lock "cmpxchgl %k1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u32 *__ptr = (volatile u32 *)(ptr);		\
+		asm volatile(lock "cmpxchgl %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	case 8:								\
-		asm volatile(lock "cmpxchgq %1,%2"			\
-			     : "=a"(__ret)				\
-			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+	{								\
+		volatile u64 *__ptr = (volatile u64 *)(ptr);		\
+		asm volatile(lock "cmpxchgq %2,%1"			\
+			     : "=a" (__ret), "+m" (*__ptr)		\
+			     : "r" (__new), "0" (__old)			\
 			     : "memory");				\
 		break;							\
+	}								\
 	default:							\
 		__cmpxchg_wrong_size();					\
 	}								\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 46814591438..781a50b29a4 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -6,7 +6,7 @@
 
 #include <asm/required-features.h>
 
-#define NCAPINTS	9	/* N 32-bit words worth of info */
+#define NCAPINTS	10	/* N 32-bit words worth of info */
 
 /*
  * Note: If the comment begins with a quoted string, that string is used
@@ -89,7 +89,7 @@
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
 #define X86_FEATURE_11AP	(3*32+19) /* "" Bad local APIC aka 11AP */
 #define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_AMDC1E	(3*32+21) /* AMD C1E detected */
+					  /* 21 available, was AMD_C1E */
 #define X86_FEATURE_XTOPOLOGY	(3*32+22) /* cpu topology enum extensions */
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
@@ -124,6 +124,8 @@
 #define X86_FEATURE_XSAVE	(4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
 #define X86_FEATURE_OSXSAVE	(4*32+27) /* "" XSAVE enabled in the OS */
 #define X86_FEATURE_AVX		(4*32+28) /* Advanced Vector Extensions */
+#define X86_FEATURE_F16C	(4*32+29) /* 16-bit fp conversions */
+#define X86_FEATURE_RDRND	(4*32+30) /* The RDRAND instruction */
 #define X86_FEATURE_HYPERVISOR	(4*32+31) /* Running on a hypervisor */
 
 /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
@@ -157,22 +159,29 @@
 
 /*
  * Auxiliary flags: Linux defined - For features scattered in various
- * CPUID levels like 0x6, 0xA etc
+ * CPUID levels like 0x6, 0xA etc, word 7
  */
 #define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
 #define X86_FEATURE_ARAT	(7*32+ 1) /* Always Running APIC Timer */
 #define X86_FEATURE_CPB		(7*32+ 2) /* AMD Core Performance Boost */
+#define X86_FEATURE_EPB		(7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
+#define X86_FEATURE_XSAVEOPT	(7*32+ 4) /* Optimized Xsave */
+#define X86_FEATURE_PLN		(7*32+ 5) /* Intel Power Limit Notification */
+#define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
 
-/* Virtualization flags: Linux defined */
+/* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
 #define X86_FEATURE_VNMI        (8*32+ 1) /* Intel Virtual NMI */
 #define X86_FEATURE_FLEXPRIORITY (8*32+ 2) /* Intel FlexPriority */
 #define X86_FEATURE_EPT         (8*32+ 3) /* Intel Extended Page Table */
 #define X86_FEATURE_VPID        (8*32+ 4) /* Intel Virtual Processor ID */
-#define X86_FEATURE_NPT		(8*32+5)  /* AMD Nested Page Table support */
-#define X86_FEATURE_LBRV	(8*32+6)  /* AMD LBR Virtualization support */
-#define X86_FEATURE_SVML	(8*32+7)  /* "svm_lock" AMD SVM locking MSR */
-#define X86_FEATURE_NRIPS	(8*32+8)  /* "nrip_save" AMD SVM next_rip save */
+#define X86_FEATURE_NPT		(8*32+ 5) /* AMD Nested Page Table support */
+#define X86_FEATURE_LBRV	(8*32+ 6) /* AMD LBR Virtualization support */
+#define X86_FEATURE_SVML	(8*32+ 7) /* "svm_lock" AMD SVM locking MSR */
+#define X86_FEATURE_NRIPS	(8*32+ 8) /* "nrip_save" AMD SVM next_rip save */
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
+#define X86_FEATURE_FSGSBASE	(9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 
@@ -194,7 +203,9 @@ extern const char * const x86_power_flags[32];
 	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
 	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
 	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
-	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) )	\
+	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ||	\
+	   (((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) ||	\
+	   (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )	\
 	  ? 1 :								\
 	 test_cpu_cap(c, bit))
 
@@ -291,7 +302,7 @@ extern const char * const x86_power_flags[32];
  * patch the target code for additional performance.
  *
  */
-static __always_inline __pure bool __static_cpu_has(u8 bit)
+static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
 #if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
 		asm goto("1: jmp %l[t_no]\n"
@@ -300,11 +311,11 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			 _ASM_ALIGN "\n"
 			 _ASM_PTR "1b\n"
 			 _ASM_PTR "0\n" 	/* no replacement */
-			 " .byte %P0\n"		/* feature bit */
+			 " .word %P0\n"		/* feature bit */
 			 " .byte 2b - 1b\n"	/* source len */
 			 " .byte 0\n"		/* replacement len */
-			 " .byte 0xff + 0 - (2b-1b)\n"	/* padding */
 			 ".previous\n"
+			 /* skipping size check since replacement size = 0 */
 			 : : "i" (bit) : : t_no);
 		return true;
 	t_no:
@@ -318,10 +329,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 			     _ASM_ALIGN "\n"
 			     _ASM_PTR "1b\n"
 			     _ASM_PTR "3f\n"
-			     " .byte %P1\n"		/* feature bit */
+			     " .word %P1\n"		/* feature bit */
 			     " .byte 2b - 1b\n"		/* source len */
 			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* padding */
+			     ".previous\n"
+			     ".section .discard,\"aw\",@progbits\n"
+			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
 			     ".previous\n"
 			     ".section .altinstr_replacement,\"ax\"\n"
 			     "3: movb $1,%0\n"
@@ -337,7 +350,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit)
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\
 		boot_cpu_has(bit) :				\
-	(__builtin_constant_p(bit) && !((bit) & ~0xff)) ?	\
+	__builtin_constant_p(bit) ?				\
 		__static_cpu_has(bit) :				\
 		boot_cpu_has(bit)				\
 )
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
index a726650fc80..8caac76ac32 100644
--- a/arch/x86/include/asm/highmem.h
+++ b/arch/x86/include/asm/highmem.h
@@ -61,7 +61,7 @@ void *kmap(struct page *page);
 void kunmap(struct page *page);
 void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
 void *kmap_atomic(struct page *page, enum km_type type);
-void kunmap_atomic(void *kvaddr, enum km_type type);
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type);
 void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
 void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 struct page *kmap_atomic_to_page(void *ptr);
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
index 942255310e6..528a11e8d3e 100644
--- a/arch/x86/include/asm/hw_breakpoint.h
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -20,10 +20,10 @@ struct arch_hw_breakpoint {
 #include <linux/list.h>
 
 /* Available HW breakpoint length encodings */
+#define X86_BREAKPOINT_LEN_X		0x00
 #define X86_BREAKPOINT_LEN_1		0x40
 #define X86_BREAKPOINT_LEN_2		0x44
 #define X86_BREAKPOINT_LEN_4		0x4c
-#define X86_BREAKPOINT_LEN_EXECUTE	0x40
 
 #ifdef CONFIG_X86_64
 #define X86_BREAKPOINT_LEN_8		0x48
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index 70abda7058c..ff2546ce717 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -45,5 +45,6 @@ extern const struct hypervisor_x86 *x86_hyper;
 /* Recognized hypervisors */
 extern const struct hypervisor_x86 x86_hyper_vmware;
 extern const struct hypervisor_x86 x86_hyper_ms_hyperv;
+extern const struct hypervisor_x86 x86_hyper_xen_hvm;
 
 #endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 815c5b2b9f5..a73a8d5a5e6 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -31,7 +31,6 @@ extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
 extern asmlinkage void math_state_restore(void);
 extern void __math_state_restore(void);
-extern void init_thread_xstate(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
 extern user_regset_active_fn fpregs_active, xfpregs_active;
@@ -58,11 +57,25 @@ extern int restore_i387_xstate_ia32(void __user *buf);
 
 #define X87_FSW_ES (1 << 7)	/* Exception Summary */
 
+static __always_inline __pure bool use_xsaveopt(void)
+{
+	return static_cpu_has(X86_FEATURE_XSAVEOPT);
+}
+
 static __always_inline __pure bool use_xsave(void)
 {
 	return static_cpu_has(X86_FEATURE_XSAVE);
 }
 
+extern void __sanitize_i387_state(struct task_struct *);
+
+static inline void sanitize_i387_state(struct task_struct *tsk)
+{
+	if (!use_xsaveopt())
+		return;
+	__sanitize_i387_state(tsk);
+}
+
 #ifdef CONFIG_X86_64
 
 /* Ignore delayed exceptions from user space */
@@ -127,6 +140,15 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 {
 	int err;
 
+	/*
+	 * Clear the bytes not touched by the fxsave and reserved
+	 * for the SW usage.
+	 */
+	err = __clear_user(&fx->sw_reserved,
+			   sizeof(struct _fpx_sw_bytes));
+	if (unlikely(err))
+		return -EFAULT;
+
 	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
 		     "2:\n"
 		     ".section .fixup,\"ax\"\n"
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 8767d99c4f6..e2ca3009255 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -125,6 +125,9 @@
  */
 #define MCE_SELF_VECTOR			0xeb
 
+/* Xen vector callback to receive events in a HVM domain */
+#define XEN_HVM_EVTCHN_CALLBACK		0xe9
+
 #define NR_VECTORS			 256
 
 #define FPU_IRQ				  13
diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h
index 006da3687cd..396f5b5fc4d 100644
--- a/arch/x86/include/asm/kgdb.h
+++ b/arch/x86/include/asm/kgdb.h
@@ -39,9 +39,11 @@ enum regnames {
 	GDB_FS,			/* 14 */
 	GDB_GS,			/* 15 */
 };
+#define GDB_ORIG_AX		41
+#define DBG_MAX_REG_NUM		16
 #define NUMREGBYTES		((GDB_GS+1)*4)
 #else /* ! CONFIG_X86_32 */
-enum regnames64 {
+enum regnames {
 	GDB_AX,			/* 0 */
 	GDB_BX,			/* 1 */
 	GDB_CX,			/* 2 */
@@ -59,15 +61,15 @@ enum regnames64 {
 	GDB_R14,		/* 14 */
 	GDB_R15,		/* 15 */
 	GDB_PC,			/* 16 */
+	GDB_PS,			/* 17 */
+	GDB_CS,			/* 18 */
+	GDB_SS,			/* 19 */
 };
-
-enum regnames32 {
-	GDB_PS = 34,
-	GDB_CS,
-	GDB_SS,
-};
-#define NUMREGBYTES		((GDB_SS+1)*4)
-#endif /* CONFIG_X86_32 */
+#define GDB_ORIG_AX		57
+#define DBG_MAX_REG_NUM		20
+/* 17 64 bit regs and 3 32 bit regs */
+#define NUMREGBYTES		((17 * 8) + (3 * 4))
+#endif /* ! CONFIG_X86_32 */
 
 static inline void arch_kgdb_breakpoint(void)
 {
diff --git a/arch/x86/include/asm/local64.h b/arch/x86/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/x86/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f32a4301c4d..c62c13cb978 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -38,6 +38,10 @@
 #define MCM_ADDR_MEM	 3	/* memory address */
 #define MCM_ADDR_GENERIC 7	/* generic */
 
+/* CTL2 register defines */
+#define MCI_CTL2_CMCI_EN		(1ULL << 30)
+#define MCI_CTL2_CMCI_THRESHOLD_MASK	0x7fffULL
+
 #define MCJ_CTX_MASK		3
 #define MCJ_CTX(flags)		((flags) & MCJ_CTX_MASK)
 #define MCJ_CTX_RANDOM		0    /* inject context: random */
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 451d30e7f62..16350740edf 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -13,6 +13,32 @@
 extern int pci_mrst_init(void);
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
+/*
+ * Medfield is the follow-up of Moorestown, it combines two chip solution into
+ * one. Other than that it also added always-on and constant tsc and lapic
+ * timers. Medfield is the platform name, and the chip name is called Penwell
+ * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be
+ * identified via MSRs.
+ */
+enum mrst_cpu_type {
+	MRST_CPU_CHIP_LINCROFT = 1,
+	MRST_CPU_CHIP_PENWELL,
+};
+
+extern enum mrst_cpu_type __mrst_cpu_chip;
+static enum mrst_cpu_type mrst_identify_cpu(void)
+{
+	return __mrst_cpu_chip;
+}
+
+enum mrst_timer_options {
+	MRST_TIMER_DEFAULT,
+	MRST_TIMER_APBT_ONLY,
+	MRST_TIMER_LAPIC_APBT,
+};
+
+extern enum mrst_timer_options mrst_timer_options;
+
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX	8
 
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 509a42187dc..986f7790fdb 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -96,9 +96,6 @@
 #define MSR_IA32_MC0_CTL2		0x00000280
 #define MSR_IA32_MCx_CTL2(x)		(MSR_IA32_MC0_CTL2 + (x))
 
-#define CMCI_EN			(1ULL << 30)
-#define CMCI_THRESHOLD_MASK		0xffffULL
-
 #define MSR_P6_PERFCTR0			0x000000c1
 #define MSR_P6_PERFCTR1			0x000000c2
 #define MSR_P6_EVNTSEL0			0x00000186
@@ -161,8 +158,6 @@
 #define MSR_K7_FID_VID_STATUS		0xc0010042
 
 /* K6 MSRs */
-#define MSR_K6_EFER			0xc0000080
-#define MSR_K6_STAR			0xc0000081
 #define MSR_K6_WHCR			0xc0000082
 #define MSR_K6_UWCCR			0xc0000085
 #define MSR_K6_EPMR			0xc0000086
@@ -226,12 +221,14 @@
 #define MSR_IA32_THERM_CONTROL		0x0000019a
 #define MSR_IA32_THERM_INTERRUPT	0x0000019b
 
-#define THERM_INT_LOW_ENABLE		(1 << 0)
-#define THERM_INT_HIGH_ENABLE		(1 << 1)
+#define THERM_INT_HIGH_ENABLE		(1 << 0)
+#define THERM_INT_LOW_ENABLE		(1 << 1)
+#define THERM_INT_PLN_ENABLE		(1 << 24)
 
 #define MSR_IA32_THERM_STATUS		0x0000019c
 
 #define THERM_STATUS_PROCHOT		(1 << 0)
+#define THERM_STATUS_POWER_LIMIT	(1 << 10)
 
 #define MSR_THERM2_CTL			0x0000019d
 
@@ -241,6 +238,19 @@
 
 #define MSR_IA32_TEMPERATURE_TARGET	0x000001a2
 
+#define MSR_IA32_ENERGY_PERF_BIAS	0x000001b0
+
+#define MSR_IA32_PACKAGE_THERM_STATUS		0x000001b1
+
+#define PACKAGE_THERM_STATUS_PROCHOT		(1 << 0)
+#define PACKAGE_THERM_STATUS_POWER_LIMIT	(1 << 10)
+
+#define MSR_IA32_PACKAGE_THERM_INTERRUPT	0x000001b2
+
+#define PACKAGE_THERM_INT_HIGH_ENABLE		(1 << 0)
+#define PACKAGE_THERM_INT_LOW_ENABLE		(1 << 1)
+#define PACKAGE_THERM_INT_PLN_ENABLE		(1 << 24)
+
 /* MISC_ENABLE bits: architectural */
 #define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
 #define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index c5bc4c2d33f..084ef95274c 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -148,8 +148,8 @@ static inline unsigned long long native_read_pmc(int counter)
 #define rdmsr(msr, val1, val2)					\
 do {								\
 	u64 __val = native_read_msr((msr));			\
-	(val1) = (u32)__val;					\
-	(val2) = (u32)(__val >> 32);				\
+	(void)((val1) = (u32)__val);				\
+	(void)((val2) = (u32)(__val >> 32));			\
 } while (0)
 
 static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 93da9c3f334..932f0f86b4b 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -17,7 +17,9 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
+#if !defined(CONFIG_LOCKUP_DETECTOR)
 extern int nmi_watchdog_enabled;
+#endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h
new file mode 100644
index 00000000000..08fde475cb3
--- /dev/null
+++ b/arch/x86/include/asm/olpc_ofw.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_X86_OLPC_OFW_H
+#define _ASM_X86_OLPC_OFW_H
+
+/* index into the page table containing the entry OFW occupies */
+#define OLPC_OFW_PDE_NR 1022
+
+#define OLPC_OFW_SIG 0x2057464F	/* aka "OFW " */
+
+#ifdef CONFIG_OLPC_OPENFIRMWARE
+
+/* run an OFW command by calling into the firmware */
+#define olpc_ofw(name, args, res) \
+	__olpc_ofw((name), ARRAY_SIZE(args), args, ARRAY_SIZE(res), res)
+
+extern int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res,
+		void **res);
+
+/* determine whether OFW is available and lives in the proper memory */
+extern void olpc_ofw_detect(void);
+
+/* install OFW's pde permanently into the kernel's pgtable */
+extern void setup_olpc_ofw_pgd(void);
+
+#else /* !CONFIG_OLPC_OPENFIRMWARE */
+
+static inline void olpc_ofw_detect(void) { }
+static inline void setup_olpc_ofw_pgd(void) { }
+
+#endif /* !CONFIG_OLPC_OPENFIRMWARE */
+
+#endif /* _ASM_X86_OLPC_OFW_H */
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index cd2a31dc5fb..49c7219826f 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -30,6 +30,7 @@
 #define PCI_HAS_IO_ECS		0x40000
 #define PCI_NOASSIGN_ROMS	0x80000
 #define PCI_ROOT_NO_CRS		0x100000
+#define PCI_NOASSIGN_BARS	0x200000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 254883d0c7e..6e742cc4251 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -68,8 +68,9 @@ union cpuid10_eax {
 
 union cpuid10_edx {
 	struct {
-		unsigned int num_counters_fixed:4;
-		unsigned int reserved:28;
+		unsigned int num_counters_fixed:5;
+		unsigned int bit_width_fixed:8;
+		unsigned int reserved:19;
 	} split;
 	unsigned int full;
 };
@@ -140,6 +141,19 @@ extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
 extern unsigned long perf_misc_flags(struct pt_regs *regs);
 #define perf_misc_flags(regs)	perf_misc_flags(regs)
 
+#include <asm/stacktrace.h>
+
+/*
+ * We abuse bit 3 from flags to pass exact information, see perf_misc_flags
+ * and the comment with PERF_EFLAGS_EXACT.
+ */
+#define perf_arch_fetch_caller_regs(regs, __ip)		{	\
+	(regs)->ip = (__ip);					\
+	(regs)->bp = caller_frame_pointer();			\
+	(regs)->cs = __KERNEL_CS;				\
+	regs->flags = 0;					\
+}
+
 #else
 static inline void init_hw_perf_events(void)		{ }
 static inline void perf_events_lapic_init(void)	{ }
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index 64a8ebff06f..def500776b1 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -19,7 +19,6 @@
 #define ARCH_P4_RESERVED_ESCR	(2) /* IQ_ESCR(0,1) not always present */
 #define ARCH_P4_MAX_ESCR	(ARCH_P4_TOTAL_ESCR - ARCH_P4_RESERVED_ESCR)
 #define ARCH_P4_MAX_CCCR	(18)
-#define ARCH_P4_MAX_COUNTER	(ARCH_P4_MAX_CCCR / 2)
 
 #define P4_ESCR_EVENT_MASK	0x7e000000U
 #define P4_ESCR_EVENT_SHIFT	25
@@ -71,10 +70,6 @@
 #define P4_CCCR_THRESHOLD(v)		((v) << P4_CCCR_THRESHOLD_SHIFT)
 #define P4_CCCR_ESEL(v)			((v) << P4_CCCR_ESCR_SELECT_SHIFT)
 
-/* Custom bits in reerved CCCR area */
-#define P4_CCCR_CACHE_OPS_MASK		0x0000003fU
-
-
 /* Non HT mask */
 #define P4_CCCR_MASK				\
 	(P4_CCCR_OVF			|	\
@@ -106,8 +101,7 @@
  * ESCR and CCCR but rather an only packed value should
  * be unpacked and written to a proper addresses
  *
- * the base idea is to pack as much info as
- * possible
+ * the base idea is to pack as much info as possible
  */
 #define p4_config_pack_escr(v)		(((u64)(v)) << 32)
 #define p4_config_pack_cccr(v)		(((u64)(v)) & 0xffffffffULL)
@@ -130,8 +124,6 @@
 		t;					\
 	})
 
-#define p4_config_unpack_cache_event(v)	(((u64)(v)) & P4_CCCR_CACHE_OPS_MASK)
-
 #define P4_CONFIG_HT_SHIFT		63
 #define P4_CONFIG_HT			(1ULL << P4_CONFIG_HT_SHIFT)
 
@@ -214,6 +206,12 @@ static inline u32 p4_default_escr_conf(int cpu, int exclude_os, int exclude_usr)
 	return escr;
 }
 
+/*
+ * This are the events which should be used in "Event Select"
+ * field of ESCR register, they are like unique keys which allow
+ * the kernel to determinate which CCCR and COUNTER should be
+ * used to track an event
+ */
 enum P4_EVENTS {
 	P4_EVENT_TC_DELIVER_MODE,
 	P4_EVENT_BPU_FETCH_REQUEST,
@@ -561,7 +559,7 @@ enum P4_EVENT_OPCODES {
  * a caller should use P4_ESCR_EMASK_NAME helper to
  * pick the EventMask needed, for example
  *
- *	P4_ESCR_EMASK_NAME(P4_EVENT_TC_DELIVER_MODE, DD)
+ *	P4_ESCR_EMASK_BIT(P4_EVENT_TC_DELIVER_MODE, DD)
  */
 enum P4_ESCR_EMASKS {
 	P4_GEN_ESCR_EMASK(P4_EVENT_TC_DELIVER_MODE, DD, 0),
@@ -753,43 +751,50 @@ enum P4_ESCR_EMASKS {
 	P4_GEN_ESCR_EMASK(P4_EVENT_INSTR_COMPLETED, BOGUS, 1),
 };
 
-/* P4 PEBS: stale for a while */
-#define P4_PEBS_METRIC_MASK	0x00001fffU
-#define P4_PEBS_UOB_TAG		0x01000000U
-#define P4_PEBS_ENABLE		0x02000000U
-
-/* Replay metrics for MSR_IA32_PEBS_ENABLE and MSR_P4_PEBS_MATRIX_VERT */
-#define P4_PEBS__1stl_cache_load_miss_retired	0x3000001
-#define P4_PEBS__2ndl_cache_load_miss_retired	0x3000002
-#define P4_PEBS__dtlb_load_miss_retired		0x3000004
-#define P4_PEBS__dtlb_store_miss_retired	0x3000004
-#define P4_PEBS__dtlb_all_miss_retired		0x3000004
-#define P4_PEBS__tagged_mispred_branch		0x3018000
-#define P4_PEBS__mob_load_replay_retired	0x3000200
-#define P4_PEBS__split_load_retired		0x3000400
-#define P4_PEBS__split_store_retired		0x3000400
-
-#define P4_VERT__1stl_cache_load_miss_retired	0x0000001
-#define P4_VERT__2ndl_cache_load_miss_retired	0x0000001
-#define P4_VERT__dtlb_load_miss_retired		0x0000001
-#define P4_VERT__dtlb_store_miss_retired	0x0000002
-#define P4_VERT__dtlb_all_miss_retired		0x0000003
-#define P4_VERT__tagged_mispred_branch		0x0000010
-#define P4_VERT__mob_load_replay_retired	0x0000001
-#define P4_VERT__split_load_retired		0x0000001
-#define P4_VERT__split_store_retired		0x0000002
-
-enum P4_CACHE_EVENTS {
-	P4_CACHE__NONE,
-
-	P4_CACHE__1stl_cache_load_miss_retired,
-	P4_CACHE__2ndl_cache_load_miss_retired,
-	P4_CACHE__dtlb_load_miss_retired,
-	P4_CACHE__dtlb_store_miss_retired,
-	P4_CACHE__itlb_reference_hit,
-	P4_CACHE__itlb_reference_miss,
-
-	P4_CACHE__MAX
+/*
+ * P4 PEBS specifics (Replay Event only)
+ *
+ * Format (bits):
+ *   0-6: metric from P4_PEBS_METRIC enum
+ *    7 : reserved
+ *    8 : reserved
+ * 9-11 : reserved
+ *
+ * Note we have UOP and PEBS bits reserved for now
+ * just in case if we will need them once
+ */
+#define P4_PEBS_CONFIG_ENABLE		(1 << 7)
+#define P4_PEBS_CONFIG_UOP_TAG		(1 << 8)
+#define P4_PEBS_CONFIG_METRIC_MASK	0x3f
+#define P4_PEBS_CONFIG_MASK		0xff
+
+/*
+ * mem: Only counters MSR_IQ_COUNTER4 (16) and
+ * MSR_IQ_COUNTER5 (17) are allowed for PEBS sampling
+ */
+#define P4_PEBS_ENABLE			0x02000000U
+#define P4_PEBS_ENABLE_UOP_TAG		0x01000000U
+
+#define p4_config_unpack_metric(v)	(((u64)(v)) & P4_PEBS_CONFIG_METRIC_MASK)
+#define p4_config_unpack_pebs(v)	(((u64)(v)) & P4_PEBS_CONFIG_MASK)
+
+#define p4_config_pebs_has(v, mask)	(p4_config_unpack_pebs(v) & (mask))
+
+enum P4_PEBS_METRIC {
+	P4_PEBS_METRIC__none,
+
+	P4_PEBS_METRIC__1stl_cache_load_miss_retired,
+	P4_PEBS_METRIC__2ndl_cache_load_miss_retired,
+	P4_PEBS_METRIC__dtlb_load_miss_retired,
+	P4_PEBS_METRIC__dtlb_store_miss_retired,
+	P4_PEBS_METRIC__dtlb_all_miss_retired,
+	P4_PEBS_METRIC__tagged_mispred_branch,
+	P4_PEBS_METRIC__mob_load_replay_retired,
+	P4_PEBS_METRIC__split_load_retired,
+	P4_PEBS_METRIC__split_store_retired,
+
+	P4_PEBS_METRIC__max
 };
 
 #endif /* PERF_EVENT_P4_H */
+
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 181be528c61..076052cd62b 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -126,8 +126,8 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 /* x86-64 always has all page tables mapped. */
 #define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
 #define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
-#define pte_unmap(pte) /* NOP */
-#define pte_unmap_nested(pte) /* NOP */
+#define pte_unmap(pte) ((void)(pte))/* NOP */
+#define pte_unmap_nested(pte) ((void)(pte)) /* NOP */
 
 #define update_mmu_cache(vma, address, ptep) do { } while (0)
 
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 7e5c6a60b8e..325b7bdbeba 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -762,6 +762,7 @@ extern void init_c1e_mask(void);
 extern unsigned long		boot_option_idle_override;
 extern unsigned long		idle_halt;
 extern unsigned long		idle_nomwait;
+extern bool			c1e_detected;
 
 /*
  * on systems with caches, caches must be flashed as the absolute
@@ -1025,4 +1026,24 @@ unsigned long calc_aperfmperf_ratio(struct aperfmperf *old,
 	return ratio;
 }
 
+/*
+ * AMD errata checking
+ */
+#ifdef CONFIG_CPU_SUP_AMD
+extern const int amd_erratum_383[];
+extern const int amd_erratum_400[];
+extern bool cpu_has_amd_erratum(const int *);
+
+#define AMD_LEGACY_ERRATUM(...)		{ -1, __VA_ARGS__, 0 }
+#define AMD_OSVW_ERRATUM(osvw_id, ...)	{ osvw_id, __VA_ARGS__, 0 }
+#define AMD_MODEL_RANGE(f, m_start, s_start, m_end, s_end) \
+	((f << 24) | (m_start << 16) | (s_start << 12) | (m_end << 4) | (s_end))
+#define AMD_MODEL_RANGE_FAMILY(range)	(((range) >> 24) & 0xff)
+#define AMD_MODEL_RANGE_START(range)	(((range) >> 12) & 0xfff)
+#define AMD_MODEL_RANGE_END(range)	((range) & 0xfff)
+
+#else
+#define cpu_has_amd_erratum(x)	(false)
+#endif /* CONFIG_CPU_SUP_AMD */
+
 #endif /* _ASM_X86_PROCESSOR_H */
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index 64cf2d24fad..6c7fc25f2c3 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -84,5 +84,7 @@
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
 #define REQUIRED_MASK7	0
+#define REQUIRED_MASK8	0
+#define REQUIRED_MASK9	0
 
 #endif /* _ASM_X86_REQUIRED_FEATURES_H */
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index 606ede12697..d1e41b0f9b6 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -118,7 +118,7 @@ static inline void __down_read(struct rw_semaphore *sem)
 {
 	asm volatile("# beginning down_read\n\t"
 		     LOCK_PREFIX _ASM_INC "(%1)\n\t"
-		     /* adds 0x00000001, returns the old value */
+		     /* adds 0x00000001 */
 		     "  jns        1f\n"
 		     "  call call_rwsem_down_read_failed\n"
 		     "1:\n\t"
@@ -156,11 +156,9 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
 static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 {
 	rwsem_count_t tmp;
-
-	tmp = RWSEM_ACTIVE_WRITE_BIAS;
 	asm volatile("# beginning down_write\n\t"
 		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* subtract 0x0000ffff, returns the old value */
+		     /* adds 0xffff0001, returns the old value */
 		     "  test      %1,%1\n\t"
 		     /* was the count 0 before? */
 		     "  jz        1f\n"
@@ -168,7 +166,7 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
 		     "1:\n"
 		     "# ending down_write"
 		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (tmp)
+		     : "a" (sem), "1" (RWSEM_ACTIVE_WRITE_BIAS)
 		     : "memory", "cc");
 }
 
@@ -195,16 +193,16 @@ static inline int __down_write_trylock(struct rw_semaphore *sem)
  */
 static inline void __up_read(struct rw_semaphore *sem)
 {
-	rwsem_count_t tmp = -RWSEM_ACTIVE_READ_BIAS;
+	rwsem_count_t tmp;
 	asm volatile("# beginning __up_read\n\t"
 		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
 		     /* subtracts 1, returns the old value */
 		     "  jns        1f\n\t"
-		     "  call call_rwsem_wake\n"
+		     "  call call_rwsem_wake\n" /* expects old value in %edx */
 		     "1:\n"
 		     "# ending __up_read\n"
 		     : "+m" (sem->count), "=d" (tmp)
-		     : "a" (sem), "1" (tmp)
+		     : "a" (sem), "1" (-RWSEM_ACTIVE_READ_BIAS)
 		     : "memory", "cc");
 }
 
@@ -216,10 +214,9 @@ static inline void __up_write(struct rw_semaphore *sem)
 	rwsem_count_t tmp;
 	asm volatile("# beginning __up_write\n\t"
 		     LOCK_PREFIX "  xadd      %1,(%2)\n\t"
-		     /* tries to transition
-			0xffff0001 -> 0x00000000 */
-		     "  jz       1f\n"
-		     "  call call_rwsem_wake\n"
+		     /* subtracts 0xffff0001, returns the old value */
+		     "  jns        1f\n\t"
+		     "  call call_rwsem_wake\n" /* expects old value in %edx */
 		     "1:\n\t"
 		     "# ending __up_write\n"
 		     : "+m" (sem->count), "=d" (tmp)
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 86b1506f417..ef292c792d7 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -82,7 +82,7 @@ void *extend_brk(size_t size, size_t align);
  * executable.)
  */
 #define RESERVE_BRK(name,sz)						\
-	static void __section(.discard) __used				\
+	static void __section(.discard.text) __used			\
 	__brk_reservation_fn_##name##__(void) {				\
 		asm volatile (						\
 			".pushsection .brk_reservation,\"aw\",@nobits;" \
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 4dab78edbad..2b16a2ad23d 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -1,6 +1,13 @@
+/*
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
+ */
+
 #ifndef _ASM_X86_STACKTRACE_H
 #define _ASM_X86_STACKTRACE_H
 
+#include <linux/uaccess.h>
+
 extern int kstack_depth_to_print;
 
 struct thread_info;
@@ -42,4 +49,46 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
 		const struct stacktrace_ops *ops, void *data);
 
+#ifdef CONFIG_X86_32
+#define STACKSLOTS_PER_LINE 8
+#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :)
+#else
+#define STACKSLOTS_PER_LINE 4
+#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
+#endif
+
+extern void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl);
+
+extern void
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl);
+
+extern unsigned int code_bytes;
+
+/* The form of the top of the frame on the stack */
+struct stack_frame {
+	struct stack_frame *next_frame;
+	unsigned long return_address;
+};
+
+struct stack_frame_ia32 {
+    u32 next_frame;
+    u32 return_address;
+};
+
+static inline unsigned long caller_frame_pointer(void)
+{
+	struct stack_frame *frame;
+
+	get_bp(frame);
+
+#ifdef CONFIG_FRAME_POINTER
+	frame = frame->next_frame;
+#endif
+
+	return (unsigned long)frame;
+}
+
 #endif /* _ASM_X86_STACKTRACE_H */
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 9c371e4a9fa..7fda040a76c 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -417,6 +417,12 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg)
 	return _hypercall2(int, nmi_op, op, arg);
 }
 
+static inline unsigned long __must_check
+HYPERVISOR_hvm_op(int op, void *arg)
+{
+       return _hypercall2(unsigned long, hvm_op, op, arg);
+}
+
 static inline void
 MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set)
 {
diff --git a/arch/x86/include/asm/xsave.h b/arch/x86/include/asm/xsave.h
index 32c36668fa7..c6ce2452f10 100644
--- a/arch/x86/include/asm/xsave.h
+++ b/arch/x86/include/asm/xsave.h
@@ -3,7 +3,8 @@
 
 #include <linux/types.h>
 #include <asm/processor.h>
-#include <asm/i387.h>
+
+#define XSTATE_CPUID		0x0000000d
 
 #define XSTATE_FP	0x1
 #define XSTATE_SSE	0x2
@@ -32,10 +33,8 @@
 
 extern unsigned int xstate_size;
 extern u64 pcntxt_mask;
-extern struct xsave_struct *init_xstate_buf;
 extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
-extern void xsave_cntxt_init(void);
 extern void xsave_init(void);
 extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
 extern int init_fpu(struct task_struct *child);
@@ -65,6 +64,16 @@ static inline int fpu_xrstor_checking(struct fpu *fpu)
 static inline int xsave_user(struct xsave_struct __user *buf)
 {
 	int err;
+
+	/*
+	 * Clear the xsave header first, so that reserved fields are
+	 * initialized to zero.
+	 */
+	err = __clear_user(&buf->xsave_hdr,
+			   sizeof(struct xsave_hdr_struct));
+	if (unlikely(err))
+		return -EFAULT;
+
 	__asm__ __volatile__("1: .byte " REX_PREFIX "0x0f,0xae,0x27\n"
 			     "2:\n"
 			     ".section .fixup,\"ax\"\n"
@@ -117,12 +126,25 @@ static inline void xrstor_state(struct xsave_struct *fx, u64 mask)
 		     :   "memory");
 }
 
+static inline void xsave_state(struct xsave_struct *fx, u64 mask)
+{
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
+
+	asm volatile(".byte " REX_PREFIX "0x0f,0xae,0x27\n\t"
+		     : : "D" (fx), "m" (*fx), "a" (lmask), "d" (hmask)
+		     :   "memory");
+}
+
 static inline void fpu_xsave(struct fpu *fpu)
 {
 	/* This, however, we can work around by forcing the compiler to select
 	   an addressing mode that doesn't require extended registers. */
-	__asm__ __volatile__(".byte " REX_PREFIX "0x0f,0xae,0x27"
-			     : : "D" (&(fpu->state->xsave)),
-				 "a" (-1), "d"(-1) : "memory");
+	alternative_input(
+		".byte " REX_PREFIX "0x0f,0xae,0x27",
+		".byte " REX_PREFIX "0x0f,0xae,0x37",
+		X86_FEATURE_XSAVEOPT,
+		[fx] "D" (&fpu->state->xsave), "a" (-1), "d" (-1) :
+		"memory");
 }
 #endif
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index e77b2208372..0925676266b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -104,6 +104,7 @@ obj-$(CONFIG_SCx200)		+= scx200.o
 scx200-y			+= scx200_32.o
 
 obj-$(CONFIG_OLPC)		+= olpc.o
+obj-$(CONFIG_OLPC_OPENFIRMWARE)	+= olpc_ofw.o
 obj-$(CONFIG_X86_MRST)		+= mrst.o
 
 microcode-y				:= microcode_core.o
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
index 580b4e29601..28595d6df47 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -104,7 +104,7 @@ _start:
 	movl	%eax, %ecx
 	orl	%edx, %ecx
 	jz	1f
-	movl	$0xc0000080, %ecx
+	movl	$MSR_EFER, %ecx
 	wrmsr
 1:
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 70237732a6c..f65ab8b014c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -214,6 +214,7 @@ void __init_or_module apply_alternatives(struct alt_instr *start,
 		u8 *instr = a->instr;
 		BUG_ON(a->replacementlen > a->instrlen);
 		BUG_ON(a->instrlen > sizeof(insnbuf));
+		BUG_ON(a->cpuid >= NCAPINTS*32);
 		if (!boot_cpu_has(a->cpuid))
 			continue;
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0d20286d78c..fa044e1e30a 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -2572,6 +2572,11 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 static int amd_iommu_domain_has_cap(struct iommu_domain *domain,
 				    unsigned long cap)
 {
+	switch (cap) {
+	case IOMMU_CAP_CACHE_COHERENCY:
+		return 1;
+	}
+
 	return 0;
 }
 
@@ -2609,8 +2614,7 @@ int __init amd_iommu_init_passthrough(void)
 
 	pt_domain->mode |= PAGE_MODE_NONE;
 
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-
+	for_each_pci_dev(dev) {
 		if (!check_device(&dev->dev))
 			continue;
 
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index a35347501d3..8dd77800ff5 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -43,10 +43,11 @@
 
 #include <asm/fixmap.h>
 #include <asm/apb_timer.h>
+#include <asm/mrst.h>
 
 #define APBT_MASK			CLOCKSOURCE_MASK(32)
 #define APBT_SHIFT			22
-#define APBT_CLOCKEVENT_RATING		150
+#define APBT_CLOCKEVENT_RATING		110
 #define APBT_CLOCKSOURCE_RATING		250
 #define APBT_MIN_DELTA_USEC		200
 
@@ -83,8 +84,6 @@ struct apbt_dev {
 	char name[10];
 };
 
-int disable_apbt_percpu __cpuinitdata;
-
 static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
 
 #ifdef CONFIG_SMP
@@ -195,29 +194,6 @@ static struct clock_event_device apbt_clockevent = {
 };
 
 /*
- * if user does not want to use per CPU apb timer, just give it a lower rating
- * than local apic timer and skip the late per cpu timer init.
- */
-static inline int __init setup_x86_mrst_timer(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp("apbt_only", arg) == 0)
-		disable_apbt_percpu = 0;
-	else if (strcmp("lapic_and_apbt", arg) == 0)
-		disable_apbt_percpu = 1;
-	else {
-		pr_warning("X86 MRST timer option %s not recognised"
-			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
-		return -EINVAL;
-	}
-	return 0;
-}
-__setup("x86_mrst_timer=", setup_x86_mrst_timer);
-
-/*
  * start count down from 0xffff_ffff. this is done by toggling the enable bit
  * then load initial load count to ~0.
  */
@@ -335,7 +311,7 @@ static int __init apbt_clockevent_register(void)
 	adev->num = smp_processor_id();
 	memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
 
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
 		global_clock_event = &adev->evt;
 		printk(KERN_DEBUG "%s clockevent registered as global\n",
@@ -429,7 +405,8 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 
 static __init int apbt_late_init(void)
 {
-	if (disable_apbt_percpu || !apb_timer_block_enabled)
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||
+		!apb_timer_block_enabled)
 		return 0;
 	/* This notifier should be called after workqueue is ready */
 	hotcpu_notifier(apbt_cpuhp_notify, -20);
@@ -450,6 +427,8 @@ static void apbt_set_mode(enum clock_event_mode mode,
 	int timer_num;
 	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt);
 
+	BUG_ON(!apbt_virt_address);
+
 	timer_num = adev->num;
 	pr_debug("%s CPU %d timer %d mode=%d\n",
 		 __func__, first_cpu(*evt->cpumask), timer_num, mode);
@@ -676,7 +655,7 @@ void __init apbt_time_init(void)
 	}
 #ifdef CONFIG_SMP
 	/* kernel cmdline disable apb timer, so we will use lapic timers */
-	if (disable_apbt_percpu) {
+	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
 		printk(KERN_INFO "apbt: disabled per cpu timer\n");
 		return;
 	}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index b5d8b0bcf23..a2e0caf26e1 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -280,7 +280,7 @@ void __init early_gart_iommu_check(void)
 	 * or BIOS forget to put that in reserved.
 	 * try to update e820 to make that region as reserved.
 	 */
-	u32 agp_aper_base = 0, agp_aper_order = 0;
+	u32 agp_aper_order = 0;
 	int i, fix, slot, valid_agp = 0;
 	u32 ctl;
 	u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
@@ -291,7 +291,7 @@ void __init early_gart_iommu_check(void)
 		return;
 
 	/* This is mostly duplicate of iommu_hole_init */
-	agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+	search_agp_bridge(&agp_aper_order, &valid_agp);
 
 	fix = 0;
 	for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 565c1bfc507..910f20b457c 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,7 +2,12 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
+ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
+obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
+endif
+obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 425e53a87fe..8593582d802 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -129,7 +129,6 @@ int					es7000_plat;
  * GSI override for ES7000 platforms.
  */
 
-static unsigned int			base;
 
 static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
 {
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
new file mode 100644
index 00000000000..cefd6942f0e
--- /dev/null
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -0,0 +1,107 @@
+/*
+ *  HW NMI watchdog support
+ *
+ *  started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
+ *
+ *  Arch specific calls to support NMI watchdog
+ *
+ *  Bits copied from original nmi.c file
+ *
+ */
+#include <asm/apic.h>
+
+#include <linux/cpumask.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/nmi.h>
+#include <linux/module.h>
+
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
+u64 hw_nmi_get_sample_period(void)
+{
+	return (u64)(cpu_khz) * 1000 * 60;
+}
+
+#ifdef ARCH_HAS_NMI_WATCHDOG
+void arch_trigger_all_cpu_backtrace(void)
+{
+	int i;
+
+	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
+
+	printk(KERN_INFO "sending NMI to all CPUs:\n");
+	apic->send_IPI_all(NMI_VECTOR);
+
+	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
+	for (i = 0; i < 10 * 1000; i++) {
+		if (cpumask_empty(to_cpumask(backtrace_mask)))
+			break;
+		mdelay(1);
+	}
+}
+
+static int __kprobes
+arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
+			 unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct pt_regs *regs;
+	int cpu = smp_processor_id();
+
+	switch (cmd) {
+	case DIE_NMI:
+	case DIE_NMI_IPI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
+		static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+		arch_spin_lock(&lock);
+		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+		show_regs(regs);
+		dump_stack();
+		arch_spin_unlock(&lock);
+		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
+		return NOTIFY_STOP;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static __read_mostly struct notifier_block backtrace_notifier = {
+	.notifier_call          = arch_trigger_all_cpu_backtrace_handler,
+	.next                   = NULL,
+	.priority               = 1
+};
+
+static int __init register_trigger_all_cpu_backtrace(void)
+{
+	register_die_notifier(&backtrace_notifier);
+	return 0;
+}
+early_initcall(register_trigger_all_cpu_backtrace);
+#endif
+
+/* STUB calls to mimic old nmi_watchdog behaviour */
+#if defined(CONFIG_X86_LOCAL_APIC)
+unsigned int nmi_watchdog = NMI_NONE;
+EXPORT_SYMBOL(nmi_watchdog);
+void acpi_nmi_enable(void) { return; }
+void acpi_nmi_disable(void) { return; }
+#endif
+atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
+int unknown_nmi_panic;
+void cpu_nmi_set_wd_enabled(void) { return; }
+void stop_apic_nmi_watchdog(void *unused) { return; }
+void setup_apic_nmi_watchdog(void *unused) { return; }
+int __init check_nmi_watchdog(void) { return 0; }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e41ed24ab26..4dc0084ec1b 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3397,7 +3397,7 @@ static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
 
 	cfg = desc->chip_data;
 
-	read_msi_msg_desc(desc, &msg);
+	get_cached_msi_msg_desc(desc, &msg);
 
 	msg.data &= ~MSI_DATA_VECTOR_MASK;
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 1edaf15c0b8..a43f71cb30f 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -401,13 +401,6 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 	int cpu = smp_processor_id();
 	int rc = 0;
 
-	/* check for other users first */
-	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
-			== NOTIFY_STOP) {
-		rc = 1;
-		touched = 1;
-	}
-
 	sum = get_timer_irqs(cpu);
 
 	if (__get_cpu_var(nmi_touch)) {
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 3a785da34b6..3f0ebe429a0 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -12,11 +12,11 @@ endif
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_common.o		:= $(nostackp)
 
-obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
+obj-y			:= intel_cacheinfo.o scattered.o topology.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o sched.o mshyperv.o
 
-obj-$(CONFIG_X86_32)	+= bugs.o cmpxchg.o
+obj-$(CONFIG_X86_32)	+= bugs.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
 
 obj-$(CONFIG_CPU_SUP_INTEL)		+= intel.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index e485825130d..60a57b13082 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -466,7 +466,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 
 	}
-	if (c->x86 == 0x10 || c->x86 == 0x11)
+	if (c->x86 >= 0x10)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 
 	/* get apicid instead of initial apic id from cpuid */
@@ -529,7 +529,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 			num_cache_leaves = 3;
 	}
 
-	if (c->x86 >= 0xf && c->x86 <= 0x11)
+	if (c->x86 >= 0xf)
 		set_cpu_cap(c, X86_FEATURE_K8);
 
 	if (cpu_has_xmm2) {
@@ -546,7 +546,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		fam10h_check_enable_mmcfg();
 	}
 
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+	if (c == &boot_cpu_data && c->x86 >= 0xf) {
 		unsigned long long tseg;
 
 		/*
@@ -609,3 +609,74 @@ static const struct cpu_dev __cpuinitconst amd_cpu_dev = {
 };
 
 cpu_dev_register(amd_cpu_dev);
+
+/*
+ * AMD errata checking
+ *
+ * Errata are defined as arrays of ints using the AMD_LEGACY_ERRATUM() or
+ * AMD_OSVW_ERRATUM() macros. The latter is intended for newer errata that
+ * have an OSVW id assigned, which it takes as first argument. Both take a
+ * variable number of family-specific model-stepping ranges created by
+ * AMD_MODEL_RANGE(). Each erratum also has to be declared as extern const
+ * int[] in arch/x86/include/asm/processor.h.
+ *
+ * Example:
+ *
+ * const int amd_erratum_319[] =
+ *	AMD_LEGACY_ERRATUM(AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0x4, 0x2),
+ *			   AMD_MODEL_RANGE(0x10, 0x8, 0x0, 0x8, 0x0),
+ *			   AMD_MODEL_RANGE(0x10, 0x9, 0x0, 0x9, 0x0));
+ */
+
+const int amd_erratum_400[] =
+	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
+			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
+EXPORT_SYMBOL_GPL(amd_erratum_400);
+
+const int amd_erratum_383[] =
+	AMD_OSVW_ERRATUM(3, AMD_MODEL_RANGE(0x10, 0, 0, 0xff, 0xf));
+EXPORT_SYMBOL_GPL(amd_erratum_383);
+
+bool cpu_has_amd_erratum(const int *erratum)
+{
+	struct cpuinfo_x86 *cpu = &current_cpu_data;
+	int osvw_id = *erratum++;
+	u32 range;
+	u32 ms;
+
+	/*
+	 * If called early enough that current_cpu_data hasn't been initialized
+	 * yet, fall back to boot_cpu_data.
+	 */
+	if (cpu->x86 == 0)
+		cpu = &boot_cpu_data;
+
+	if (cpu->x86_vendor != X86_VENDOR_AMD)
+		return false;
+
+	if (osvw_id >= 0 && osvw_id < 65536 &&
+	    cpu_has(cpu, X86_FEATURE_OSVW)) {
+		u64 osvw_len;
+
+		rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, osvw_len);
+		if (osvw_id < osvw_len) {
+			u64 osvw_bits;
+
+			rdmsrl(MSR_AMD64_OSVW_STATUS + (osvw_id >> 6),
+			    osvw_bits);
+			return osvw_bits & (1ULL << (osvw_id & 0x3f));
+		}
+	}
+
+	/* OSVW unavailable or ID unknown, match family-model-stepping range */
+	ms = (cpu->x86_model << 8) | cpu->x86_mask;
+	while ((range = *erratum++))
+		if ((cpu->x86 == AMD_MODEL_RANGE_FAMILY(range)) &&
+		    (ms >= AMD_MODEL_RANGE_START(range)) &&
+		    (ms <= AMD_MODEL_RANGE_END(range)))
+			return true;
+
+	return false;
+}
+
+EXPORT_SYMBOL_GPL(cpu_has_amd_erratum);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 68e4a6f2211..490dac63c2d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -140,10 +140,18 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
 static int __init x86_xsave_setup(char *s)
 {
 	setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
 	return 1;
 }
 __setup("noxsave", x86_xsave_setup);
 
+static int __init x86_xsaveopt_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
+	return 1;
+}
+__setup("noxsaveopt", x86_xsaveopt_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;
@@ -551,6 +559,16 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 		c->x86_capability[4] = excap;
 	}
 
+	/* Additional Intel-defined flags: level 0x00000007 */
+	if (c->cpuid_level >= 0x00000007) {
+		u32 eax, ebx, ecx, edx;
+
+		cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
+
+		if (eax > 0)
+			c->x86_capability[9] = ebx;
+	}
+
 	/* AMD-defined flags: level 0x80000001 */
 	xlvl = cpuid_eax(0x80000000);
 	c->extended_cpuid_level = xlvl;
@@ -576,6 +594,7 @@ static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
+	init_scattered_cpuid_features(c);
 }
 
 static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
@@ -731,7 +750,6 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 
 	get_model_name(c); /* Default name */
 
-	init_scattered_cpuid_features(c);
 	detect_nopl(c);
 }
 
@@ -1192,6 +1210,7 @@ void __cpuinit cpu_init(void)
 	dbg_restore_debug_regs();
 
 	fpu_init();
+	xsave_init();
 
 	raw_local_save_flags(kernel_eflags);
 
@@ -1252,12 +1271,7 @@ void __cpuinit cpu_init(void)
 	clear_used_math();
 	mxcsr_feature_mask_init();
 
-	/*
-	 * Boot processor to setup the FP and extended state context info.
-	 */
-	if (smp_processor_id() == boot_cpu_id)
-		init_thread_xstate();
-
+	fpu_init();
 	xsave_init();
 }
 #endif
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index dd531cc56a8..8095f8611f8 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -34,6 +34,9 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] =
 {
 	&x86_hyper_vmware,
 	&x86_hyper_ms_hyperv,
+#ifdef CONFIG_XEN_PVHVM
+	&x86_hyper_xen_hvm,
+#endif
 };
 
 const struct hypervisor_x86 *x86_hyper;
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 33eae2062cf..898c2f4eab8 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -347,8 +347,8 @@ static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node)
 	return l3;
 }
 
-static void __cpuinit
-amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
+static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf,
+					   int index)
 {
 	int node;
 
@@ -396,20 +396,39 @@ amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
 	this_leaf->l3 = l3_caches[node];
 }
 
+/*
+ * check whether a slot used for disabling an L3 index is occupied.
+ * @l3: L3 cache descriptor
+ * @slot: slot number (0..1)
+ *
+ * @returns: the disabled index if used or negative value if slot free.
+ */
+int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot)
+{
+	unsigned int reg = 0;
+
+	pci_read_config_dword(l3->dev, 0x1BC + slot * 4, &reg);
+
+	/* check whether this slot is activated already */
+	if (reg & (3UL << 30))
+		return reg & 0xfff;
+
+	return -1;
+}
+
 static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
 				  unsigned int slot)
 {
-	struct pci_dev *dev = this_leaf->l3->dev;
-	unsigned int reg = 0;
+	int index;
 
 	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
 		return -EINVAL;
 
-	if (!dev)
-		return -EINVAL;
+	index = amd_get_l3_disable_slot(this_leaf->l3, slot);
+	if (index >= 0)
+		return sprintf(buf, "%d\n", index);
 
-	pci_read_config_dword(dev, 0x1BC + slot * 4, &reg);
-	return sprintf(buf, "0x%08x\n", reg);
+	return sprintf(buf, "FREE\n");
 }
 
 #define SHOW_CACHE_DISABLE(slot)					\
@@ -451,37 +470,74 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu,
 	}
 }
 
-
-static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
-				   const char *buf, size_t count,
-				   unsigned int slot)
+/*
+ * disable a L3 cache index by using a disable-slot
+ *
+ * @l3:    L3 cache descriptor
+ * @cpu:   A CPU on the node containing the L3 cache
+ * @slot:  slot number (0..1)
+ * @index: index to disable
+ *
+ * @return: 0 on success, error status on failure
+ */
+int amd_set_l3_disable_slot(struct amd_l3_cache *l3, int cpu, unsigned slot,
+			    unsigned long index)
 {
-	struct pci_dev *dev = this_leaf->l3->dev;
-	int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
-	unsigned long val = 0;
+	int ret = 0;
 
 #define SUBCACHE_MASK	(3UL << 20)
 #define SUBCACHE_INDEX	0xfff
 
-	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
+	/*
+	 * check whether this slot is already used or
+	 * the index is already disabled
+	 */
+	ret = amd_get_l3_disable_slot(l3, slot);
+	if (ret >= 0)
 		return -EINVAL;
 
+	/*
+	 * check whether the other slot has disabled the
+	 * same index already
+	 */
+	if (index == amd_get_l3_disable_slot(l3, !slot))
+		return -EINVAL;
+
+	/* do not allow writes outside of allowed bits */
+	if ((index & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
+	    ((index & SUBCACHE_INDEX) > l3->indices))
+		return -EINVAL;
+
+	amd_l3_disable_index(l3, cpu, slot, index);
+
+	return 0;
+}
+
+static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
+				  const char *buf, size_t count,
+				  unsigned int slot)
+{
+	unsigned long val = 0;
+	int cpu, err = 0;
+
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!dev)
+	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
 		return -EINVAL;
 
-	if (strict_strtoul(buf, 10, &val) < 0)
-		return -EINVAL;
+	cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
 
-	/* do not allow writes outside of allowed bits */
-	if ((val & ~(SUBCACHE_MASK | SUBCACHE_INDEX)) ||
-	    ((val & SUBCACHE_INDEX) > this_leaf->l3->indices))
+	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
 
-	amd_l3_disable_index(this_leaf->l3, cpu, slot, val);
-
+	err = amd_set_l3_disable_slot(this_leaf->l3, cpu, slot, val);
+	if (err) {
+		if (err == -EEXIST)
+			printk(KERN_WARNING "L3 disable slot %d in use!\n",
+					    slot);
+		return err;
+	}
 	return count;
 }
 
@@ -502,7 +558,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
 
 #else	/* CONFIG_CPU_SUP_AMD */
 static void __cpuinit
-amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf)
+amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, int index)
 {
 };
 #endif /* CONFIG_CPU_SUP_AMD */
@@ -518,7 +574,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index,
 
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		amd_cpuid4(index, &eax, &ebx, &ecx);
-		amd_check_l3_disable(index, this_leaf);
+		amd_check_l3_disable(this_leaf, index);
 	} else {
 		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 1970ef911c9..ed41562909f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -51,7 +51,7 @@
 static DEFINE_MUTEX(mce_read_mutex);
 
 #define rcu_dereference_check_mce(p) \
-	rcu_dereference_check((p), \
+	rcu_dereference_index_check((p), \
 			      rcu_read_lock_sched_held() || \
 			      lockdep_is_held(&mce_read_mutex))
 
@@ -107,8 +107,8 @@ EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
 static int default_decode_mce(struct notifier_block *nb, unsigned long val,
 			       void *data)
 {
-	pr_emerg("No human readable MCE decoding support on this CPU type.\n");
-	pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+	pr_emerg(HW_ERR "No human readable MCE decoding support on this CPU type.\n");
+	pr_emerg(HW_ERR "Run the message through 'mcelog --ascii' to decode.\n");
 
 	return NOTIFY_STOP;
 }
@@ -211,11 +211,11 @@ void mce_log(struct mce *mce)
 
 static void print_mce(struct mce *m)
 {
-	pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+	pr_emerg(HW_ERR "CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
 	       m->extcpu, m->mcgstatus, m->bank, m->status);
 
 	if (m->ip) {
-		pr_emerg("RIP%s %02x:<%016Lx> ",
+		pr_emerg(HW_ERR "RIP%s %02x:<%016Lx> ",
 			!(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
 				m->cs, m->ip);
 
@@ -224,14 +224,14 @@ static void print_mce(struct mce *m)
 		pr_cont("\n");
 	}
 
-	pr_emerg("TSC %llx ", m->tsc);
+	pr_emerg(HW_ERR "TSC %llx ", m->tsc);
 	if (m->addr)
 		pr_cont("ADDR %llx ", m->addr);
 	if (m->misc)
 		pr_cont("MISC %llx ", m->misc);
 
 	pr_cont("\n");
-	pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+	pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 		m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid);
 
 	/*
@@ -241,16 +241,6 @@ static void print_mce(struct mce *m)
 	atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
 }
 
-static void print_mce_head(void)
-{
-	pr_emerg("\nHARDWARE ERROR\n");
-}
-
-static void print_mce_tail(void)
-{
-	pr_emerg("This is not a software problem!\n");
-}
-
 #define PANIC_TIMEOUT 5 /* 5 seconds */
 
 static atomic_t mce_paniced;
@@ -291,7 +281,6 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 		if (atomic_inc_return(&mce_fake_paniced) > 1)
 			return;
 	}
-	print_mce_head();
 	/* First print corrected ones that are still unlogged */
 	for (i = 0; i < MCE_LOG_LEN; i++) {
 		struct mce *m = &mcelog.entry[i];
@@ -322,16 +311,15 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 			apei_err = apei_write_mce(final);
 	}
 	if (cpu_missing)
-		printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n");
-	print_mce_tail();
+		pr_emerg(HW_ERR "Some CPUs didn't answer in synchronization\n");
 	if (exp)
-		printk(KERN_EMERG "Machine check: %s\n", exp);
+		pr_emerg(HW_ERR "Machine check: %s\n", exp);
 	if (!fake_panic) {
 		if (panic_timeout == 0)
 			panic_timeout = mce_panic_timeout;
 		panic(msg);
 	} else
-		printk(KERN_EMERG "Fake kernel panic: %s\n", msg);
+		pr_emerg(HW_ERR "Fake kernel panic: %s\n", msg);
 }
 
 /* Support code for software error injection */
@@ -1221,7 +1209,7 @@ int mce_notify_irq(void)
 			schedule_work(&mce_trigger_work);
 
 		if (__ratelimit(&ratelimit))
-			printk(KERN_INFO "Machine check events logged\n");
+			pr_info(HW_ERR "Machine check events logged\n");
 
 		return 1;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 62b48e40920..6fcd0936194 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -95,19 +95,20 @@ static void cmci_discover(int banks, int boot)
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Already owned by someone else? */
-		if (val & CMCI_EN) {
+		if (val & MCI_CTL2_CMCI_EN) {
 			if (test_and_clear_bit(i, owned) && !boot)
 				print_update("SHD", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
 			continue;
 		}
 
-		val |= CMCI_EN | CMCI_THRESHOLD;
+		val &= ~MCI_CTL2_CMCI_THRESHOLD_MASK;
+		val |= MCI_CTL2_CMCI_EN | CMCI_THRESHOLD;
 		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
 
 		/* Did the enable bit stick? -- the bank supports CMCI */
-		if (val & CMCI_EN) {
+		if (val & MCI_CTL2_CMCI_EN) {
 			if (!test_and_set_bit(i, owned) && !boot)
 				print_update("CMCI", &hdr, i);
 			__clear_bit(i, __get_cpu_var(mce_poll_banks));
@@ -155,7 +156,7 @@ void cmci_clear(void)
 			continue;
 		/* Disable CMCI */
 		rdmsrl(MSR_IA32_MCx_CTL2(i), val);
-		val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK);
+		val &= ~(MCI_CTL2_CMCI_EN|MCI_CTL2_CMCI_THRESHOLD_MASK);
 		wrmsrl(MSR_IA32_MCx_CTL2(i), val);
 		__clear_bit(i, __get_cpu_var(mce_banks_owned));
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index e1a0a3bf971..c2a8b26d4fe 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -34,15 +34,25 @@
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
 
+#define THERMAL_THROTTLING_EVENT	0
+#define POWER_LIMIT_EVENT		1
+
 /*
- * Current thermal throttling state:
+ * Current thermal event state:
  */
-struct thermal_state {
-	bool			is_throttled;
-
+struct _thermal_state {
+	bool			new_event;
+	int			event;
 	u64			next_check;
-	unsigned long		throttle_count;
-	unsigned long		last_throttle_count;
+	unsigned long		count;
+	unsigned long		last_count;
+};
+
+struct thermal_state {
+	struct _thermal_state core_throttle;
+	struct _thermal_state core_power_limit;
+	struct _thermal_state package_throttle;
+	struct _thermal_state package_power_limit;
 };
 
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
@@ -53,11 +63,13 @@ static u32 lvtthmr_init __read_mostly;
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
-	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+	static SYSDEV_ATTR(_name, 0444,					\
+			   therm_throt_sysdev_show_##_name,		\
+				   NULL)				\
 
-#define define_therm_throt_sysdev_show_func(name)			\
+#define define_therm_throt_sysdev_show_func(event, name)		\
 									\
-static ssize_t therm_throt_sysdev_show_##name(				\
+static ssize_t therm_throt_sysdev_show_##event##_##name(		\
 			struct sys_device *dev,				\
 			struct sysdev_attribute *attr,			\
 			char *buf)					\
@@ -66,30 +78,42 @@ static ssize_t therm_throt_sysdev_show_##name(				\
 	ssize_t ret;							\
 									\
 	preempt_disable();	/* CPU hotplug */			\
-	if (cpu_online(cpu))						\
+	if (cpu_online(cpu)) {						\
 		ret = sprintf(buf, "%lu\n",				\
-			      per_cpu(thermal_state, cpu).name);	\
-	else								\
+			      per_cpu(thermal_state, cpu).event.name);	\
+	} else								\
 		ret = 0;						\
 	preempt_enable();						\
 									\
 	return ret;							\
 }
 
-define_therm_throt_sysdev_show_func(throttle_count);
-define_therm_throt_sysdev_one_ro(throttle_count);
+define_therm_throt_sysdev_show_func(core_throttle, count);
+define_therm_throt_sysdev_one_ro(core_throttle_count);
+
+define_therm_throt_sysdev_show_func(core_power_limit, count);
+define_therm_throt_sysdev_one_ro(core_power_limit_count);
+
+define_therm_throt_sysdev_show_func(package_throttle, count);
+define_therm_throt_sysdev_one_ro(package_throttle_count);
+
+define_therm_throt_sysdev_show_func(package_power_limit, count);
+define_therm_throt_sysdev_one_ro(package_power_limit_count);
 
 static struct attribute *thermal_throttle_attrs[] = {
-	&attr_throttle_count.attr,
+	&attr_core_throttle_count.attr,
 	NULL
 };
 
-static struct attribute_group thermal_throttle_attr_group = {
+static struct attribute_group thermal_attr_group = {
 	.attrs	= thermal_throttle_attrs,
 	.name	= "thermal_throttle"
 };
 #endif /* CONFIG_SYSFS */
 
+#define CORE_LEVEL	0
+#define PACKAGE_LEVEL	1
+
 /***
  * therm_throt_process - Process thermal throttling event from interrupt
  * @curr: Whether the condition is current or not (boolean), since the
@@ -106,39 +130,70 @@ static struct attribute_group thermal_throttle_attr_group = {
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-static int therm_throt_process(bool is_throttled)
+static int therm_throt_process(bool new_event, int event, int level)
 {
-	struct thermal_state *state;
-	unsigned int this_cpu;
-	bool was_throttled;
+	struct _thermal_state *state;
+	unsigned int this_cpu = smp_processor_id();
+	bool old_event;
 	u64 now;
+	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
 
-	this_cpu = smp_processor_id();
 	now = get_jiffies_64();
-	state = &per_cpu(thermal_state, this_cpu);
+	if (level == CORE_LEVEL) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			state = &pstate->core_throttle;
+		else if (event == POWER_LIMIT_EVENT)
+			state = &pstate->core_power_limit;
+		else
+			 return 0;
+	} else if (level == PACKAGE_LEVEL) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			state = &pstate->package_throttle;
+		else if (event == POWER_LIMIT_EVENT)
+			state = &pstate->package_power_limit;
+		else
+			return 0;
+	} else
+		return 0;
 
-	was_throttled = state->is_throttled;
-	state->is_throttled = is_throttled;
+	old_event = state->new_event;
+	state->new_event = new_event;
 
-	if (is_throttled)
-		state->throttle_count++;
+	if (new_event)
+		state->count++;
 
 	if (time_before64(now, state->next_check) &&
-			state->throttle_count != state->last_throttle_count)
+			state->count != state->last_count)
 		return 0;
 
 	state->next_check = now + CHECK_INTERVAL;
-	state->last_throttle_count = state->throttle_count;
+	state->last_count = state->count;
 
 	/* if we just entered the thermal event */
-	if (is_throttled) {
-		printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
+	if (new_event) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
+				this_cpu,
+				level == CORE_LEVEL ? "Core" : "Package",
+				state->count);
+		else
+			printk(KERN_CRIT "CPU%d: %s power limit notification (total events = %lu)\n",
+				this_cpu,
+				level == CORE_LEVEL ? "Core" : "Package",
+				state->count);
 
 		add_taint(TAINT_MACHINE_CHECK);
 		return 1;
 	}
-	if (was_throttled) {
-		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
+	if (old_event) {
+		if (event == THERMAL_THROTTLING_EVENT)
+			printk(KERN_INFO "CPU%d: %s temperature/speed normal\n",
+				this_cpu,
+				level == CORE_LEVEL ? "Core" : "Package");
+		else
+			printk(KERN_INFO "CPU%d: %s power limit normal\n",
+				this_cpu,
+				level == CORE_LEVEL ? "Core" : "Package");
 		return 1;
 	}
 
@@ -149,13 +204,32 @@ static int therm_throt_process(bool is_throttled)
 /* Add/Remove thermal_throttle interface for CPU device: */
 static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
 {
-	return sysfs_create_group(&sys_dev->kobj,
-				  &thermal_throttle_attr_group);
+	int err;
+	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+
+	err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group);
+	if (err)
+		return err;
+
+	if (cpu_has(c, X86_FEATURE_PLN))
+		err = sysfs_add_file_to_group(&sys_dev->kobj,
+					      &attr_core_power_limit_count.attr,
+					      thermal_attr_group.name);
+	if (cpu_has(c, X86_FEATURE_PTS))
+		err = sysfs_add_file_to_group(&sys_dev->kobj,
+					      &attr_package_throttle_count.attr,
+					      thermal_attr_group.name);
+		if (cpu_has(c, X86_FEATURE_PLN))
+			err = sysfs_add_file_to_group(&sys_dev->kobj,
+					&attr_package_power_limit_count.attr,
+					thermal_attr_group.name);
+
+	return err;
 }
 
 static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
 {
-	sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+	sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group);
 }
 
 /* Mutex protecting device creation against CPU hotplug: */
@@ -226,14 +300,50 @@ device_initcall(thermal_throttle_init_device);
 
 #endif /* CONFIG_SYSFS */
 
+/*
+ * Set up the most two significant bit to notify mce log that this thermal
+ * event type.
+ * This is a temp solution. May be changed in the future with mce log
+ * infrasture.
+ */
+#define CORE_THROTTLED		(0)
+#define CORE_POWER_LIMIT	((__u64)1 << 62)
+#define PACKAGE_THROTTLED	((__u64)2 << 62)
+#define PACKAGE_POWER_LIMIT	((__u64)3 << 62)
+
 /* Thermal transition interrupt handler */
 static void intel_thermal_interrupt(void)
 {
 	__u64 msr_val;
+	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
-		mce_log_therm_throt_event(msr_val);
+
+	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
+				THERMAL_THROTTLING_EVENT,
+				CORE_LEVEL) != 0)
+		mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
+
+	if (cpu_has(c, X86_FEATURE_PLN))
+		if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
+					POWER_LIMIT_EVENT,
+					CORE_LEVEL) != 0)
+			mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
+
+	if (cpu_has(c, X86_FEATURE_PTS)) {
+		rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
+		if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
+					THERMAL_THROTTLING_EVENT,
+					PACKAGE_LEVEL) != 0)
+			mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
+		if (cpu_has(c, X86_FEATURE_PLN))
+			if (therm_throt_process(msr_val &
+					PACKAGE_THERM_STATUS_POWER_LIMIT,
+					POWER_LIMIT_EVENT,
+					PACKAGE_LEVEL) != 0)
+				mce_log_therm_throt_event(PACKAGE_POWER_LIMIT
+							  | msr_val);
+	}
 }
 
 static void unexpected_thermal_interrupt(void)
@@ -335,8 +445,26 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 	apic_write(APIC_LVTTHMR, h);
 
 	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
-	wrmsr(MSR_IA32_THERM_INTERRUPT,
-		l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+	if (cpu_has(c, X86_FEATURE_PLN))
+		wrmsr(MSR_IA32_THERM_INTERRUPT,
+		      l | (THERM_INT_LOW_ENABLE
+			| THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
+	else
+		wrmsr(MSR_IA32_THERM_INTERRUPT,
+		      l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+	if (cpu_has(c, X86_FEATURE_PTS)) {
+		rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+		if (cpu_has(c, X86_FEATURE_PLN))
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			      l | (PACKAGE_THERM_INT_LOW_ENABLE
+				| PACKAGE_THERM_INT_HIGH_ENABLE
+				| PACKAGE_THERM_INT_PLN_ENABLE), h);
+		else
+			wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
+			      l | (PACKAGE_THERM_INT_LOW_ENABLE
+				| PACKAGE_THERM_INT_HIGH_ENABLE), h);
+	}
 
 	smp_thermal_vector = intel_thermal_interrupt;
 
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 16f41bbe46b..d944bf6c50e 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -18,6 +18,7 @@
 #include <asm/mshyperv.h>
 
 struct ms_hyperv_info ms_hyperv;
+EXPORT_SYMBOL_GPL(ms_hyperv);
 
 static bool __init ms_hyperv_platform(void)
 {
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 06130b52f01..c5f59d07142 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -632,9 +632,9 @@ static void __init mtrr_print_out_one_result(int i)
 	unsigned long gran_base, chunk_base, lose_base;
 	char gran_factor, chunk_factor, lose_factor;
 
-	gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
-	chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
-	lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
+	gran_base = to_size_factor(result[i].gran_sizek, &gran_factor);
+	chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor);
+	lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor);
 
 	pr_info("%sgran_size: %ld%c \tchunk_size: %ld%c \t",
 		result[i].bad ? "*BAD*" : " ",
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index fd31a441c61..7d28d7d0388 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -433,13 +433,12 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 {
 	unsigned int mask_lo, mask_hi, base_lo, base_hi;
 	unsigned int tmp, hi;
-	int cpu;
 
 	/*
 	 * get_mtrr doesn't need to update mtrr_state, also it could be called
 	 * from any cpu, so try to print it out directly.
 	 */
-	cpu = get_cpu();
+	get_cpu();
 
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 79556bd9b60..01c0f3ee6cc 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -35,6 +35,7 @@
 
 #include <linux/types.h> /* FIXME: kvm_para.h needs this */
 
+#include <linux/stop_machine.h>
 #include <linux/kvm_para.h>
 #include <linux/uaccess.h>
 #include <linux/module.h>
@@ -143,22 +144,28 @@ struct set_mtrr_data {
 	mtrr_type	smp_type;
 };
 
+static DEFINE_PER_CPU(struct cpu_stop_work, mtrr_work);
+
 /**
- * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ * mtrr_work_handler - Synchronisation handler. Executed by "other" CPUs.
  * @info: pointer to mtrr configuration data
  *
  * Returns nothing.
  */
-static void ipi_handler(void *info)
+static int mtrr_work_handler(void *info)
 {
 #ifdef CONFIG_SMP
 	struct set_mtrr_data *data = info;
 	unsigned long flags;
 
+	atomic_dec(&data->count);
+	while (!atomic_read(&data->gate))
+		cpu_relax();
+
 	local_irq_save(flags);
 
 	atomic_dec(&data->count);
-	while (!atomic_read(&data->gate))
+	while (atomic_read(&data->gate))
 		cpu_relax();
 
 	/*  The master has cleared me to execute  */
@@ -173,12 +180,13 @@ static void ipi_handler(void *info)
 	}
 
 	atomic_dec(&data->count);
-	while (atomic_read(&data->gate))
+	while (!atomic_read(&data->gate))
 		cpu_relax();
 
 	atomic_dec(&data->count);
 	local_irq_restore(flags);
 #endif
+	return 0;
 }
 
 static inline int types_compatible(mtrr_type type1, mtrr_type type2)
@@ -198,7 +206,7 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2)
  *
  * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
  *
- * 1. Send IPI to do the following:
+ * 1. Queue work to do the following on all processors:
  * 2. Disable Interrupts
  * 3. Wait for all procs to do so
  * 4. Enter no-fill cache mode
@@ -215,14 +223,17 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2)
  * 15. Enable interrupts.
  *
  * What does that mean for us? Well, first we set data.count to the number
- * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
- * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * of CPUs. As each CPU announces that it started the rendezvous handler by
+ * decrementing the count, We reset data.count and set the data.gate flag
+ * allowing all the cpu's to proceed with the work. As each cpu disables
+ * interrupts, it'll decrement data.count once. We wait until it hits 0 and
+ * proceed. We clear the data.gate flag and reset data.count. Meanwhile, they
+ * are waiting for that flag to be cleared. Once it's cleared, each
  * CPU goes through the transition of updating MTRRs.
  * The CPU vendors may each do it differently,
  * so we call mtrr_if->set() callback and let them take care of it.
  * When they're done, they again decrement data->count and wait for data.gate
- * to be reset.
+ * to be set.
  * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
  * Everyone then enables interrupts and we all continue on.
  *
@@ -234,6 +245,9 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 {
 	struct set_mtrr_data data;
 	unsigned long flags;
+	int cpu;
+
+	preempt_disable();
 
 	data.smp_reg = reg;
 	data.smp_base = base;
@@ -246,10 +260,15 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 	atomic_set(&data.gate, 0);
 
 	/* Start the ball rolling on other CPUs */
-	if (smp_call_function(ipi_handler, &data, 0) != 0)
-		panic("mtrr: timed out waiting for other CPUs\n");
+	for_each_online_cpu(cpu) {
+		struct cpu_stop_work *work = &per_cpu(mtrr_work, cpu);
+
+		if (cpu == smp_processor_id())
+			continue;
+
+		stop_one_cpu_nowait(cpu, mtrr_work_handler, &data, work);
+	}
 
-	local_irq_save(flags);
 
 	while (atomic_read(&data.count))
 		cpu_relax();
@@ -259,6 +278,16 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 	smp_wmb();
 	atomic_set(&data.gate, 1);
 
+	local_irq_save(flags);
+
+	while (atomic_read(&data.count))
+		cpu_relax();
+
+	/* Ok, reset count and toggle gate */
+	atomic_set(&data.count, num_booting_cpus() - 1);
+	smp_wmb();
+	atomic_set(&data.gate, 0);
+
 	/* Do our MTRR business */
 
 	/*
@@ -279,7 +308,7 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate, 0);
+	atomic_set(&data.gate, 1);
 
 	/*
 	 * Wait here for everyone to have seen the gate change
@@ -289,6 +318,7 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 		cpu_relax();
 
 	local_irq_restore(flags);
+	preempt_enable();
 }
 
 /**
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 5db5b7d65a1..f2da20fda02 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -220,6 +220,7 @@ struct x86_pmu {
 						 struct perf_event *event);
 	struct event_constraint *event_constraints;
 	void		(*quirks)(void);
+	int		perfctr_second_write;
 
 	int		(*cpu_prepare)(int cpu);
 	void		(*cpu_starting)(int cpu);
@@ -295,10 +296,10 @@ x86_perf_event_update(struct perf_event *event)
 	 * count to the generic event atomically:
 	 */
 again:
-	prev_raw_count = atomic64_read(&hwc->prev_count);
+	prev_raw_count = local64_read(&hwc->prev_count);
 	rdmsrl(hwc->event_base + idx, new_raw_count);
 
-	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
 					new_raw_count) != prev_raw_count)
 		goto again;
 
@@ -313,8 +314,8 @@ again:
 	delta = (new_raw_count << shift) - (prev_raw_count << shift);
 	delta >>= shift;
 
-	atomic64_add(delta, &event->count);
-	atomic64_sub(delta, &hwc->period_left);
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
 
 	return new_raw_count;
 }
@@ -438,7 +439,7 @@ static int x86_setup_perfctr(struct perf_event *event)
 	if (!hwc->sample_period) {
 		hwc->sample_period = x86_pmu.max_period;
 		hwc->last_period = hwc->sample_period;
-		atomic64_set(&hwc->period_left, hwc->sample_period);
+		local64_set(&hwc->period_left, hwc->sample_period);
 	} else {
 		/*
 		 * If we have a PMU initialized but no APIC
@@ -885,7 +886,7 @@ static int
 x86_perf_event_set_period(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
-	s64 left = atomic64_read(&hwc->period_left);
+	s64 left = local64_read(&hwc->period_left);
 	s64 period = hwc->sample_period;
 	int ret = 0, idx = hwc->idx;
 
@@ -897,14 +898,14 @@ x86_perf_event_set_period(struct perf_event *event)
 	 */
 	if (unlikely(left <= -period)) {
 		left = period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
 
 	if (unlikely(left <= 0)) {
 		left += period;
-		atomic64_set(&hwc->period_left, left);
+		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		ret = 1;
 	}
@@ -923,10 +924,19 @@ x86_perf_event_set_period(struct perf_event *event)
 	 * The hw event starts counting from this event offset,
 	 * mark it to be able to extra future deltas:
 	 */
-	atomic64_set(&hwc->prev_count, (u64)-left);
+	local64_set(&hwc->prev_count, (u64)-left);
 
-	wrmsrl(hwc->event_base + idx,
+	wrmsrl(hwc->event_base + idx, (u64)(-left) & x86_pmu.cntval_mask);
+
+	/*
+	 * Due to erratum on certan cpu we need
+	 * a second write to be sure the register
+	 * is updated properly
+	 */
+	if (x86_pmu.perfctr_second_write) {
+		wrmsrl(hwc->event_base + idx,
 			(u64)(-left) & x86_pmu.cntval_mask);
+	}
 
 	perf_event_update_userpage(event);
 
@@ -969,7 +979,7 @@ static int x86_pmu_enable(struct perf_event *event)
 	 * skip the schedulability test here, it will be peformed
 	 * at commit time(->commit_txn) as a whole
 	 */
-	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+	if (cpuc->group_flag & PERF_EVENT_TXN)
 		goto out;
 
 	ret = x86_pmu.schedule_events(cpuc, n, assign);
@@ -1096,7 +1106,7 @@ static void x86_pmu_disable(struct perf_event *event)
 	 * The events never got scheduled and ->cancel_txn will truncate
 	 * the event_list.
 	 */
-	if (cpuc->group_flag & PERF_EVENT_TXN_STARTED)
+	if (cpuc->group_flag & PERF_EVENT_TXN)
 		return;
 
 	x86_pmu_stop(event);
@@ -1388,7 +1398,7 @@ static void x86_pmu_start_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
-	cpuc->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuc->group_flag |= PERF_EVENT_TXN;
 	cpuc->n_txn = 0;
 }
 
@@ -1401,7 +1411,7 @@ static void x86_pmu_cancel_txn(const struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
-	cpuc->group_flag &= ~PERF_EVENT_TXN_STARTED;
+	cpuc->group_flag &= ~PERF_EVENT_TXN;
 	/*
 	 * Truncate the collected events.
 	 */
@@ -1435,11 +1445,7 @@ static int x86_pmu_commit_txn(const struct pmu *pmu)
 	 */
 	memcpy(cpuc->assign, assign, n*sizeof(int));
 
-	/*
-	 * Clear out the txn count so that ->cancel_txn() which gets
-	 * run after ->commit_txn() doesn't undo things.
-	 */
-	cpuc->n_txn = 0;
+	cpuc->group_flag &= ~PERF_EVENT_TXN;
 
 	return 0;
 }
@@ -1607,8 +1613,6 @@ static const struct stacktrace_ops backtrace_ops = {
 	.walk_stack		= print_context_stack_bp,
 };
 
-#include "../dumpstack.h"
-
 static void
 perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
 {
@@ -1730,22 +1734,6 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return entry;
 }
 
-void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
-{
-	regs->ip = ip;
-	/*
-	 * perf_arch_fetch_caller_regs adds another call, we need to increment
-	 * the skip level
-	 */
-	regs->bp = rewind_frame_pointer(skip + 1);
-	regs->cs = __KERNEL_CS;
-	/*
-	 * We abuse bit 3 to pass exact information, see perf_misc_flags
-	 * and the comment with PERF_EFLAGS_EXACT.
-	 */
-	regs->flags = 0;
-}
-
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
 	unsigned long ip;
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index ae85d69644d..107711bf0ee 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -21,22 +21,36 @@ struct p4_event_bind {
 	char cntr[2][P4_CNTR_LIMIT];		/* counter index (offset), -1 on abscence */
 };
 
-struct p4_cache_event_bind {
+struct p4_pebs_bind {
 	unsigned int metric_pebs;
 	unsigned int metric_vert;
 };
 
-#define P4_GEN_CACHE_EVENT_BIND(name)		\
-	[P4_CACHE__##name] = {			\
-		.metric_pebs = P4_PEBS__##name,	\
-		.metric_vert = P4_VERT__##name,	\
+/* it sets P4_PEBS_ENABLE_UOP_TAG as well */
+#define P4_GEN_PEBS_BIND(name, pebs, vert)			\
+	[P4_PEBS_METRIC__##name] = {				\
+		.metric_pebs = pebs | P4_PEBS_ENABLE_UOP_TAG,	\
+		.metric_vert = vert,				\
 	}
 
-static struct p4_cache_event_bind p4_cache_event_bind_map[] = {
-	P4_GEN_CACHE_EVENT_BIND(1stl_cache_load_miss_retired),
-	P4_GEN_CACHE_EVENT_BIND(2ndl_cache_load_miss_retired),
-	P4_GEN_CACHE_EVENT_BIND(dtlb_load_miss_retired),
-	P4_GEN_CACHE_EVENT_BIND(dtlb_store_miss_retired),
+/*
+ * note we have P4_PEBS_ENABLE_UOP_TAG always set here
+ *
+ * it's needed for mapping P4_PEBS_CONFIG_METRIC_MASK bits of
+ * event configuration to find out which values are to be
+ * written into MSR_IA32_PEBS_ENABLE and MSR_P4_PEBS_MATRIX_VERT
+ * resgisters
+ */
+static struct p4_pebs_bind p4_pebs_bind_map[] = {
+	P4_GEN_PEBS_BIND(1stl_cache_load_miss_retired,	0x0000001, 0x0000001),
+	P4_GEN_PEBS_BIND(2ndl_cache_load_miss_retired,	0x0000002, 0x0000001),
+	P4_GEN_PEBS_BIND(dtlb_load_miss_retired,	0x0000004, 0x0000001),
+	P4_GEN_PEBS_BIND(dtlb_store_miss_retired,	0x0000004, 0x0000002),
+	P4_GEN_PEBS_BIND(dtlb_all_miss_retired,		0x0000004, 0x0000003),
+	P4_GEN_PEBS_BIND(tagged_mispred_branch,		0x0018000, 0x0000010),
+	P4_GEN_PEBS_BIND(mob_load_replay_retired,	0x0000200, 0x0000001),
+	P4_GEN_PEBS_BIND(split_load_retired,		0x0000400, 0x0000001),
+	P4_GEN_PEBS_BIND(split_store_retired,		0x0000400, 0x0000002),
 };
 
 /*
@@ -281,10 +295,10 @@ static struct p4_event_bind p4_event_bind_map[] = {
 	},
 };
 
-#define P4_GEN_CACHE_EVENT(event, bit, cache_event)			  \
+#define P4_GEN_CACHE_EVENT(event, bit, metric)				  \
 	p4_config_pack_escr(P4_ESCR_EVENT(event)			| \
 			    P4_ESCR_EMASK_BIT(event, bit))		| \
-	p4_config_pack_cccr(cache_event					| \
+	p4_config_pack_cccr(metric					| \
 			    P4_CCCR_ESEL(P4_OPCODE_ESEL(P4_OPCODE(event))))
 
 static __initconst const u64 p4_hw_cache_event_ids
@@ -296,34 +310,34 @@ static __initconst const u64 p4_hw_cache_event_ids
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0,
 		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
-						P4_CACHE__1stl_cache_load_miss_retired),
+						P4_PEBS_METRIC__1stl_cache_load_miss_retired),
 	},
  },
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0,
 		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
-						P4_CACHE__2ndl_cache_load_miss_retired),
+						P4_PEBS_METRIC__2ndl_cache_load_miss_retired),
 	},
 },
  [ C(DTLB) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0,
 		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
-						P4_CACHE__dtlb_load_miss_retired),
+						P4_PEBS_METRIC__dtlb_load_miss_retired),
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0,
 		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_REPLAY_EVENT, NBOGUS,
-						P4_CACHE__dtlb_store_miss_retired),
+						P4_PEBS_METRIC__dtlb_store_miss_retired),
 	},
  },
  [ C(ITLB) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, HIT,
-						P4_CACHE__itlb_reference_hit),
+						P4_PEBS_METRIC__none),
 		[ C(RESULT_MISS)   ] = P4_GEN_CACHE_EVENT(P4_EVENT_ITLB_REFERENCE, MISS,
-						P4_CACHE__itlb_reference_miss),
+						P4_PEBS_METRIC__none),
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = -1,
@@ -414,11 +428,37 @@ static u64 p4_pmu_event_map(int hw_event)
 	return config;
 }
 
+static int p4_validate_raw_event(struct perf_event *event)
+{
+	unsigned int v;
+
+	/* user data may have out-of-bound event index */
+	v = p4_config_unpack_event(event->attr.config);
+	if (v >= ARRAY_SIZE(p4_event_bind_map)) {
+		pr_warning("P4 PMU: Unknown event code: %d\n", v);
+		return -EINVAL;
+	}
+
+	/*
+	 * it may have some screwed PEBS bits
+	 */
+	if (p4_config_pebs_has(event->attr.config, P4_PEBS_CONFIG_ENABLE)) {
+		pr_warning("P4 PMU: PEBS are not supported yet\n");
+		return -EINVAL;
+	}
+	v = p4_config_unpack_metric(event->attr.config);
+	if (v >= ARRAY_SIZE(p4_pebs_bind_map)) {
+		pr_warning("P4 PMU: Unknown metric code: %d\n", v);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int p4_hw_config(struct perf_event *event)
 {
 	int cpu = get_cpu();
 	int rc = 0;
-	unsigned int evnt;
 	u32 escr, cccr;
 
 	/*
@@ -438,12 +478,9 @@ static int p4_hw_config(struct perf_event *event)
 
 	if (event->attr.type == PERF_TYPE_RAW) {
 
-		/* user data may have out-of-bound event index */
-		evnt = p4_config_unpack_event(event->attr.config);
-		if (evnt >= ARRAY_SIZE(p4_event_bind_map)) {
-			rc = -EINVAL;
+		rc = p4_validate_raw_event(event);
+		if (rc)
 			goto out;
-		}
 
 		/*
 		 * We don't control raw events so it's up to the caller
@@ -451,12 +488,15 @@ static int p4_hw_config(struct perf_event *event)
 		 * on HT machine but allow HT-compatible specifics to be
 		 * passed on)
 		 *
+		 * Note that for RAW events we allow user to use P4_CCCR_RESERVED
+		 * bits since we keep additional info here (for cache events and etc)
+		 *
 		 * XXX: HT wide things should check perf_paranoid_cpu() &&
 		 *      CAP_SYS_ADMIN
 		 */
 		event->hw.config |= event->attr.config &
 			(p4_config_pack_escr(P4_ESCR_MASK_HT) |
-			 p4_config_pack_cccr(P4_CCCR_MASK_HT));
+			 p4_config_pack_cccr(P4_CCCR_MASK_HT | P4_CCCR_RESERVED));
 	}
 
 	rc = x86_setup_perfctr(event);
@@ -482,6 +522,29 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
 	return overflow;
 }
 
+static void p4_pmu_disable_pebs(void)
+{
+	/*
+	 * FIXME
+	 *
+	 * It's still allowed that two threads setup same cache
+	 * events so we can't simply clear metrics until we knew
+	 * noone is depending on us, so we need kind of counter
+	 * for "ReplayEvent" users.
+	 *
+	 * What is more complex -- RAW events, if user (for some
+	 * reason) will pass some cache event metric with improper
+	 * event opcode -- it's fine from hardware point of view
+	 * but completely nonsence from "meaning" of such action.
+	 *
+	 * So at moment let leave metrics turned on forever -- it's
+	 * ok for now but need to be revisited!
+	 *
+	 * (void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)0);
+	 * (void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)0);
+	 */
+}
+
 static inline void p4_pmu_disable_event(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
@@ -507,6 +570,26 @@ static void p4_pmu_disable_all(void)
 			continue;
 		p4_pmu_disable_event(event);
 	}
+
+	p4_pmu_disable_pebs();
+}
+
+/* configuration must be valid */
+static void p4_pmu_enable_pebs(u64 config)
+{
+	struct p4_pebs_bind *bind;
+	unsigned int idx;
+
+	BUILD_BUG_ON(P4_PEBS_METRIC__max > P4_PEBS_CONFIG_METRIC_MASK);
+
+	idx = p4_config_unpack_metric(config);
+	if (idx == P4_PEBS_METRIC__none)
+		return;
+
+	bind = &p4_pebs_bind_map[idx];
+
+	(void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE,	(u64)bind->metric_pebs);
+	(void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT,	(u64)bind->metric_vert);
 }
 
 static void p4_pmu_enable_event(struct perf_event *event)
@@ -515,9 +598,7 @@ static void p4_pmu_enable_event(struct perf_event *event)
 	int thread = p4_ht_config_thread(hwc->config);
 	u64 escr_conf = p4_config_unpack_escr(p4_clear_ht_bit(hwc->config));
 	unsigned int idx = p4_config_unpack_event(hwc->config);
-	unsigned int idx_cache = p4_config_unpack_cache_event(hwc->config);
 	struct p4_event_bind *bind;
-	struct p4_cache_event_bind *bind_cache;
 	u64 escr_addr, cccr;
 
 	bind = &p4_event_bind_map[idx];
@@ -537,16 +618,10 @@ static void p4_pmu_enable_event(struct perf_event *event)
 	cccr = p4_config_unpack_cccr(hwc->config);
 
 	/*
-	 * it could be Cache event so that we need to
-	 * set metrics into additional MSRs
+	 * it could be Cache event so we need to write metrics
+	 * into additional MSRs
 	 */
-	BUILD_BUG_ON(P4_CACHE__MAX > P4_CCCR_CACHE_OPS_MASK);
-	if (idx_cache > P4_CACHE__NONE &&
-		idx_cache < ARRAY_SIZE(p4_cache_event_bind_map)) {
-		bind_cache = &p4_cache_event_bind_map[idx_cache];
-		(void)checking_wrmsrl(MSR_IA32_PEBS_ENABLE, (u64)bind_cache->metric_pebs);
-		(void)checking_wrmsrl(MSR_P4_PEBS_MATRIX_VERT, (u64)bind_cache->metric_vert);
-	}
+	p4_pmu_enable_pebs(hwc->config);
 
 	(void)checking_wrmsrl(escr_addr, escr_conf);
 	(void)checking_wrmsrl(hwc->config_base + hwc->idx,
@@ -829,6 +904,15 @@ static __initconst const struct x86_pmu p4_pmu = {
 	.max_period		= (1ULL << 39) - 1,
 	.hw_config		= p4_hw_config,
 	.schedule_events	= p4_pmu_schedule_events,
+	/*
+	 * This handles erratum N15 in intel doc 249199-029,
+	 * the counter may not be updated correctly on write
+	 * so we need a second write operation to do the trick
+	 * (the official workaround didn't work)
+	 *
+	 * the former idea is taken from OProfile code
+	 */
+	.perfctr_second_write	= 1,
 };
 
 static __init int p4_pmu_init(void)
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
new file mode 100644
index 00000000000..34b4dad6f0b
--- /dev/null
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -0,0 +1,63 @@
+/*
+ *	Routines to indentify additional cpu features that are scattered in
+ *	cpuid space.
+ */
+#include <linux/cpu.h>
+
+#include <asm/pat.h>
+#include <asm/processor.h>
+
+#include <asm/apic.h>
+
+struct cpuid_bit {
+	u16 feature;
+	u8 reg;
+	u8 bit;
+	u32 level;
+	u32 sub_leaf;
+};
+
+enum cpuid_regs {
+	CR_EAX = 0,
+	CR_ECX,
+	CR_EDX,
+	CR_EBX
+};
+
+void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
+{
+	u32 max_level;
+	u32 regs[4];
+	const struct cpuid_bit *cb;
+
+	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
+		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
+		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
+		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
+		{ X86_FEATURE_PTS,		CR_EAX, 6, 0x00000006, 0 },
+		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
+		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
+		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
+		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
+		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
+		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
+		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },
+		{ X86_FEATURE_NRIPS,		CR_EDX, 3, 0x8000000a, 0 },
+		{ 0, 0, 0, 0, 0 }
+	};
+
+	for (cb = cpuid_bits; cb->feature; cb++) {
+
+		/* Verify that the level is valid */
+		max_level = cpuid_eax(cb->level & 0xffff0000);
+		if (max_level < cb->level ||
+		    max_level > (cb->level | 0xffff))
+			continue;
+
+		cpuid_count(cb->level, cb->sub_leaf, &regs[CR_EAX],
+			    &regs[CR_EBX], &regs[CR_ECX], &regs[CR_EDX]);
+
+		if (regs[cb->reg] & (1 << cb->bit))
+			set_cpu_cap(c, cb->feature);
+	}
+}
diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/topology.c
index 10fa5684a66..4397e987a1c 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -1,62 +1,14 @@
 /*
- *	Routines to indentify additional cpu features that are scattered in
- *	cpuid space.
+ * Check for extended topology enumeration cpuid leaf 0xb and if it
+ * exists, use it for populating initial_apicid and cpu topology
+ * detection.
  */
-#include <linux/cpu.h>
 
+#include <linux/cpu.h>
+#include <asm/apic.h>
 #include <asm/pat.h>
 #include <asm/processor.h>
 
-#include <asm/apic.h>
-
-struct cpuid_bit {
-	u16 feature;
-	u8 reg;
-	u8 bit;
-	u32 level;
-};
-
-enum cpuid_regs {
-	CR_EAX = 0,
-	CR_ECX,
-	CR_EDX,
-	CR_EBX
-};
-
-void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
-{
-	u32 max_level;
-	u32 regs[4];
-	const struct cpuid_bit *cb;
-
-	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_IDA,   		CR_EAX, 1, 0x00000006 },
-		{ X86_FEATURE_ARAT,  		CR_EAX, 2, 0x00000006 },
-		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006 },
-		{ X86_FEATURE_CPB,   		CR_EDX, 9, 0x80000007 },
-		{ X86_FEATURE_NPT,   		CR_EDX, 0, 0x8000000a },
-		{ X86_FEATURE_LBRV,  		CR_EDX, 1, 0x8000000a },
-		{ X86_FEATURE_SVML,  		CR_EDX, 2, 0x8000000a },
-		{ X86_FEATURE_NRIPS, 		CR_EDX, 3, 0x8000000a },
-		{ 0, 0, 0, 0 }
-	};
-
-	for (cb = cpuid_bits; cb->feature; cb++) {
-
-		/* Verify that the level is valid */
-		max_level = cpuid_eax(cb->level & 0xffff0000);
-		if (max_level < cb->level ||
-		    max_level > (cb->level | 0xffff))
-			continue;
-
-		cpuid(cb->level, &regs[CR_EAX], &regs[CR_EBX],
-			&regs[CR_ECX], &regs[CR_EDX]);
-
-		if (regs[cb->reg] & (1 << cb->bit))
-			set_cpu_cap(c, cb->feature);
-	}
-}
-
 /* leaf 0xb SMT level */
 #define SMT_LEVEL	0
 
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index b9d1ff58844..227b0448960 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -51,7 +51,7 @@ static inline int __vmware_platform(void)
 
 static unsigned long vmware_get_tsc_khz(void)
 {
-	uint64_t tsc_hz;
+	uint64_t tsc_hz, lpj;
 	uint32_t eax, ebx, ecx, edx;
 
 	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
@@ -62,6 +62,13 @@ static unsigned long vmware_get_tsc_khz(void)
 	printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n",
 			 (unsigned long) tsc_hz / 1000,
 			 (unsigned long) tsc_hz % 1000);
+
+	if (!preset_lpj) {
+		lpj = ((u64)tsc_hz * 1000);
+		do_div(lpj, HZ);
+		preset_lpj = lpj;
+	}
+
 	return tsc_hz;
 }
 
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c89a386930b..6e8752c1bd5 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -18,7 +18,6 @@
 
 #include <asm/stacktrace.h>
 
-#include "dumpstack.h"
 
 int panic_on_unrecovered_nmi;
 int panic_on_io_nmi;
diff --git a/arch/x86/kernel/dumpstack.h b/arch/x86/kernel/dumpstack.h
deleted file mode 100644
index e1a93be4fd4..00000000000
--- a/arch/x86/kernel/dumpstack.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
- */
-
-#ifndef DUMPSTACK_H
-#define DUMPSTACK_H
-
-#ifdef CONFIG_X86_32
-#define STACKSLOTS_PER_LINE 8
-#define get_bp(bp) asm("movl %%ebp, %0" : "=r" (bp) :)
-#else
-#define STACKSLOTS_PER_LINE 4
-#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
-#endif
-
-#include <linux/uaccess.h>
-
-extern void
-show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl);
-
-extern void
-show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl);
-
-extern unsigned int code_bytes;
-
-/* The form of the top of the frame on the stack */
-struct stack_frame {
-	struct stack_frame *next_frame;
-	unsigned long return_address;
-};
-
-struct stack_frame_ia32 {
-    u32 next_frame;
-    u32 return_address;
-};
-
-static inline unsigned long rewind_frame_pointer(int n)
-{
-	struct stack_frame *frame;
-
-	get_bp(frame);
-
-#ifdef CONFIG_FRAME_POINTER
-	while (n--) {
-		if (probe_kernel_address(&frame->next_frame, frame))
-			break;
-	}
-#endif
-
-	return (unsigned long)frame;
-}
-
-#endif /* DUMPSTACK_H */
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 11540a189d9..0f6376ffa2d 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -16,8 +16,6 @@
 
 #include <asm/stacktrace.h>
 
-#include "dumpstack.h"
-
 
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 272c9f1f05f..57a21f11c79 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -16,7 +16,6 @@
 
 #include <asm/stacktrace.h>
 
-#include "dumpstack.h"
 
 #define N_EXCEPTION_STACKS_END \
 		(N_EXCEPTION_STACKS + DEBUG_STKSZ/EXCEPTION_STKSZ - 2)
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index cd49141cf15..227d00920d2 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -611,14 +611,14 @@ ldt_ss:
  * compensating for the offset by changing to the ESPFIX segment with
  * a base address that matches for the difference.
  */
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + (GDT_ENTRY_ESPFIX_SS * 8)
 	mov %esp, %edx			/* load kernel esp */
 	mov PT_OLDESP(%esp), %eax	/* load userspace esp */
 	mov %dx, %ax			/* eax: new kernel esp */
 	sub %eax, %edx			/* offset (low word is 0) */
-	PER_CPU(gdt_page, %ebx)
 	shr $16, %edx
-	mov %dl, GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx) /* bits 16..23 */
-	mov %dh, GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx) /* bits 24..31 */
+	mov %dl, GDT_ESPFIX_SS + 4 /* bits 16..23 */
+	mov %dh, GDT_ESPFIX_SS + 7 /* bits 24..31 */
 	pushl $__ESPFIX_SS
 	CFI_ADJUST_CFA_OFFSET 4
 	push %eax			/* new kernel esp */
@@ -791,9 +791,8 @@ ptregs_clone:
  * normal stack and adjusts ESP with the matching offset.
  */
 	/* fixup the stack */
-	PER_CPU(gdt_page, %ebx)
-	mov GDT_ENTRY_ESPFIX_SS * 8 + 4(%ebx), %al /* bits 16..23 */
-	mov GDT_ENTRY_ESPFIX_SS * 8 + 7(%ebx), %ah /* bits 24..31 */
+	mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */
+	mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */
 	shl $16, %eax
 	addl %esp, %eax			/* the adjusted stack pointer */
 	pushl $__KERNEL_DS
@@ -914,7 +913,7 @@ ENTRY(simd_coprocessor_error)
 	.balign 4
 	.long 661b
 	.long 663f
-	.byte X86_FEATURE_XMM
+	.word X86_FEATURE_XMM
 	.byte 662b-661b
 	.byte 664f-663f
 .previous
@@ -1166,6 +1165,9 @@ ENTRY(xen_failsafe_callback)
 .previous
 ENDPROC(xen_failsafe_callback)
 
+BUILD_INTERRUPT3(xen_hvm_callback_vector, XEN_HVM_EVTCHN_CALLBACK,
+		xen_evtchn_do_upcall)
+
 #endif	/* CONFIG_XEN */
 
 #ifdef CONFIG_FUNCTION_TRACER
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 4db7c4d12ff..c5ea5cdbe7b 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1065,6 +1065,7 @@ ENTRY(\sym)
 END(\sym)
 .endm
 
+#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8)
 .macro paranoidzeroentry_ist sym do_sym ist
 ENTRY(\sym)
 	INTR_FRAME
@@ -1076,10 +1077,9 @@ ENTRY(\sym)
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
-	PER_CPU(init_tss, %r12)
-	subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12)
+	subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist)
 	call \do_sym
-	addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12)
+	addq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist)
 	jmp paranoid_exit	/* %ebx: no swapgs flag */
 	CFI_ENDPROC
 END(\sym)
@@ -1329,6 +1329,9 @@ ENTRY(xen_failsafe_callback)
 	CFI_ENDPROC
 END(xen_failsafe_callback)
 
+apicinterrupt XEN_HVM_EVTCHN_CALLBACK \
+	xen_hvm_callback_vector xen_evtchn_do_upcall
+
 #endif /* CONFIG_XEN */
 
 /*
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 37c3d4b17d8..ff4c453e13f 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -131,6 +131,12 @@ ENTRY(startup_32)
 	movsl
 1:
 
+#ifdef CONFIG_OLPC_OPENFIRMWARE
+	/* save OFW's pgdir table for later use when calling into OFW */
+	movl %cr3, %eax
+	movl %eax, pa(olpc_ofw_pgd)
+#endif
+
 #ifdef CONFIG_PARAVIRT
 	/* This is can only trip for a broken bootloader... */
 	cmpw $0x207, pa(boot_params + BP_version)
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 3d1e6f16b7a..239046bd447 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -234,9 +234,8 @@ ENTRY(secondary_startup_64)
 	 * init data section till per cpu areas are set up.
 	 */
 	movl	$MSR_GS_BASE,%ecx
-	movq	initial_gs(%rip),%rax
-	movq    %rax,%rdx
-	shrq	$32,%rdx
+	movl	initial_gs(%rip),%eax
+	movl	initial_gs+4(%rip),%edx
 	wrmsr	
 
 	/* esi is pointer to real mode structure with interesting info.
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ba390d73117..33dbcc4ec5f 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -16,7 +16,6 @@
 #include <asm/hpet.h>
 
 #define HPET_MASK			CLOCKSOURCE_MASK(32)
-#define HPET_SHIFT			22
 
 /* FSEC = 10^-15
    NSEC = 10^-9 */
@@ -787,7 +786,6 @@ static struct clocksource clocksource_hpet = {
 	.rating		= 250,
 	.read		= read_hpet,
 	.mask		= HPET_MASK,
-	.shift		= HPET_SHIFT,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 	.resume		= hpet_resume_counter,
 #ifdef CONFIG_X86_64
@@ -798,6 +796,7 @@ static struct clocksource clocksource_hpet = {
 static int hpet_clocksource_register(void)
 {
 	u64 start, now;
+	u64 hpet_freq;
 	cycle_t t1;
 
 	/* Start the counter */
@@ -832,9 +831,15 @@ static int hpet_clocksource_register(void)
 	 *  mult = (hpet_period * 2^shift)/10^6
 	 *  mult = (hpet_period << shift)/FSEC_PER_NSEC
 	 */
-	clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
 
-	clocksource_register(&clocksource_hpet);
+	/* Need to convert hpet_period (fsec/cyc) to cyc/sec:
+	 *
+	 * cyc/sec = FSEC_PER_SEC/hpet_period(fsec/cyc)
+	 * cyc/sec = (FSEC_PER_NSEC * NSEC_PER_SEC)/hpet_period
+	 */
+	hpet_freq = FSEC_PER_NSEC * NSEC_PER_SEC;
+	do_div(hpet_freq, hpet_period);
+	clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index a8f1b803d2f..a474ec37c32 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -208,6 +208,9 @@ int arch_bp_generic_fields(int x86_len, int x86_type,
 {
 	/* Len */
 	switch (x86_len) {
+	case X86_BREAKPOINT_LEN_X:
+		*gen_len = sizeof(long);
+		break;
 	case X86_BREAKPOINT_LEN_1:
 		*gen_len = HW_BREAKPOINT_LEN_1;
 		break;
@@ -251,6 +254,29 @@ static int arch_build_bp_info(struct perf_event *bp)
 
 	info->address = bp->attr.bp_addr;
 
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_W:
+		info->type = X86_BREAKPOINT_WRITE;
+		break;
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		info->type = X86_BREAKPOINT_RW;
+		break;
+	case HW_BREAKPOINT_X:
+		info->type = X86_BREAKPOINT_EXECUTE;
+		/*
+		 * x86 inst breakpoints need to have a specific undefined len.
+		 * But we still need to check userspace is not trying to setup
+		 * an unsupported length, to get a range breakpoint for example.
+		 */
+		if (bp->attr.bp_len == sizeof(long)) {
+			info->len = X86_BREAKPOINT_LEN_X;
+			return 0;
+		}
+	default:
+		return -EINVAL;
+	}
+
 	/* Len */
 	switch (bp->attr.bp_len) {
 	case HW_BREAKPOINT_LEN_1:
@@ -271,21 +297,6 @@ static int arch_build_bp_info(struct perf_event *bp)
 		return -EINVAL;
 	}
 
-	/* Type */
-	switch (bp->attr.bp_type) {
-	case HW_BREAKPOINT_W:
-		info->type = X86_BREAKPOINT_WRITE;
-		break;
-	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
-		info->type = X86_BREAKPOINT_RW;
-		break;
-	case HW_BREAKPOINT_X:
-		info->type = X86_BREAKPOINT_EXECUTE;
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	return 0;
 }
 /*
@@ -305,6 +316,9 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	ret = -EINVAL;
 
 	switch (info->len) {
+	case X86_BREAKPOINT_LEN_X:
+		align = sizeof(long) -1;
+		break;
 	case X86_BREAKPOINT_LEN_1:
 		align = 0;
 		break;
@@ -466,6 +480,13 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 
 		perf_bp_event(bp, args->regs);
 
+		/*
+		 * Set up resume flag to avoid breakpoint recursion when
+		 * returning back to origin.
+		 */
+		if (bp->hw.info.type == X86_BREAKPOINT_EXECUTE)
+			args->regs->flags |= X86_EFLAGS_RF;
+
 		rcu_read_unlock();
 	}
 	/*
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index c4444bce846..1f11f5ce668 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -59,18 +59,18 @@ void __cpuinit mxcsr_feature_mask_init(void)
 	stts();
 }
 
-void __cpuinit init_thread_xstate(void)
+static void __cpuinit init_thread_xstate(void)
 {
+	/*
+	 * Note that xstate_size might be overwriten later during
+	 * xsave_init().
+	 */
+
 	if (!HAVE_HWFP) {
 		xstate_size = sizeof(struct i387_soft_struct);
 		return;
 	}
 
-	if (cpu_has_xsave) {
-		xsave_cntxt_init();
-		return;
-	}
-
 	if (cpu_has_fxsr)
 		xstate_size = sizeof(struct i387_fxsave_struct);
 #ifdef CONFIG_X86_32
@@ -84,6 +84,7 @@ void __cpuinit init_thread_xstate(void)
  * Called at bootup to set up the initial FPU state that is later cloned
  * into all processes.
  */
+
 void __cpuinit fpu_init(void)
 {
 	unsigned long oldcr0 = read_cr0();
@@ -93,19 +94,24 @@ void __cpuinit fpu_init(void)
 
 	write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
 
-	/*
-	 * Boot processor to setup the FP and extended state context info.
-	 */
 	if (!smp_processor_id())
 		init_thread_xstate();
-	xsave_init();
 
 	mxcsr_feature_mask_init();
 	/* clean state in init */
 	current_thread_info()->status = 0;
 	clear_used_math();
 }
-#endif	/* CONFIG_X86_64 */
+
+#else	/* CONFIG_X86_64 */
+
+void __cpuinit fpu_init(void)
+{
+	if (!smp_processor_id())
+		init_thread_xstate();
+}
+
+#endif	/* CONFIG_X86_32 */
 
 void fpu_finit(struct fpu *fpu)
 {
@@ -191,6 +197,8 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
+	sanitize_i387_state(target);
+
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fpu.state->fxsave, 0, -1);
 }
@@ -208,6 +216,8 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
+	sanitize_i387_state(target);
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &target->thread.fpu.state->fxsave, 0, -1);
 
@@ -447,6 +457,8 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset,
 					   -1);
 	}
 
+	sanitize_i387_state(target);
+
 	if (kbuf && pos == 0 && count == sizeof(env)) {
 		convert_from_fxsr(kbuf, target);
 		return 0;
@@ -468,6 +480,8 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
+	sanitize_i387_state(target);
+
 	if (!HAVE_HWFP)
 		return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
 
@@ -534,6 +548,9 @@ static int save_i387_xsave(void __user *buf)
 	struct _fpstate_ia32 __user *fx = buf;
 	int err = 0;
 
+
+	sanitize_i387_state(tsk);
+
 	/*
 	 * For legacy compatible, we always set FP/SSE bits in the bit
 	 * vector while saving the state to the user context.
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 01ab17ae2ae..ef10940e1af 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -49,55 +49,94 @@
 #include <asm/system.h>
 #include <asm/apic.h>
 
-/**
- *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
- *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
- *	@regs: The &struct pt_regs of the current process.
- *
- *	Convert the pt_regs in @regs into the format for registers that
- *	GDB expects, stored in @gdb_regs.
- */
-void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] =
 {
-#ifndef CONFIG_X86_32
-	u32 *gdb_regs32 = (u32 *)gdb_regs;
+#ifdef CONFIG_X86_32
+	{ "ax", 4, offsetof(struct pt_regs, ax) },
+	{ "cx", 4, offsetof(struct pt_regs, cx) },
+	{ "dx", 4, offsetof(struct pt_regs, dx) },
+	{ "bx", 4, offsetof(struct pt_regs, bx) },
+	{ "sp", 4, offsetof(struct pt_regs, sp) },
+	{ "bp", 4, offsetof(struct pt_regs, bp) },
+	{ "si", 4, offsetof(struct pt_regs, si) },
+	{ "di", 4, offsetof(struct pt_regs, di) },
+	{ "ip", 4, offsetof(struct pt_regs, ip) },
+	{ "flags", 4, offsetof(struct pt_regs, flags) },
+	{ "cs", 4, offsetof(struct pt_regs, cs) },
+	{ "ss", 4, offsetof(struct pt_regs, ss) },
+	{ "ds", 4, offsetof(struct pt_regs, ds) },
+	{ "es", 4, offsetof(struct pt_regs, es) },
+	{ "fs", 4, -1 },
+	{ "gs", 4, -1 },
+#else
+	{ "ax", 8, offsetof(struct pt_regs, ax) },
+	{ "bx", 8, offsetof(struct pt_regs, bx) },
+	{ "cx", 8, offsetof(struct pt_regs, cx) },
+	{ "dx", 8, offsetof(struct pt_regs, dx) },
+	{ "si", 8, offsetof(struct pt_regs, dx) },
+	{ "di", 8, offsetof(struct pt_regs, di) },
+	{ "bp", 8, offsetof(struct pt_regs, bp) },
+	{ "sp", 8, offsetof(struct pt_regs, sp) },
+	{ "r8", 8, offsetof(struct pt_regs, r8) },
+	{ "r9", 8, offsetof(struct pt_regs, r9) },
+	{ "r10", 8, offsetof(struct pt_regs, r10) },
+	{ "r11", 8, offsetof(struct pt_regs, r11) },
+	{ "r12", 8, offsetof(struct pt_regs, r12) },
+	{ "r13", 8, offsetof(struct pt_regs, r13) },
+	{ "r14", 8, offsetof(struct pt_regs, r14) },
+	{ "r15", 8, offsetof(struct pt_regs, r15) },
+	{ "ip", 8, offsetof(struct pt_regs, ip) },
+	{ "flags", 4, offsetof(struct pt_regs, flags) },
+	{ "cs", 4, offsetof(struct pt_regs, cs) },
+	{ "ss", 4, offsetof(struct pt_regs, ss) },
 #endif
-	gdb_regs[GDB_AX]	= regs->ax;
-	gdb_regs[GDB_BX]	= regs->bx;
-	gdb_regs[GDB_CX]	= regs->cx;
-	gdb_regs[GDB_DX]	= regs->dx;
-	gdb_regs[GDB_SI]	= regs->si;
-	gdb_regs[GDB_DI]	= regs->di;
-	gdb_regs[GDB_BP]	= regs->bp;
-	gdb_regs[GDB_PC]	= regs->ip;
+};
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (
 #ifdef CONFIG_X86_32
-	gdb_regs[GDB_PS]	= regs->flags;
-	gdb_regs[GDB_DS]	= regs->ds;
-	gdb_regs[GDB_ES]	= regs->es;
-	gdb_regs[GDB_CS]	= regs->cs;
-	gdb_regs[GDB_FS]	= 0xFFFF;
-	gdb_regs[GDB_GS]	= 0xFFFF;
-	if (user_mode_vm(regs)) {
-		gdb_regs[GDB_SS] = regs->ss;
-		gdb_regs[GDB_SP] = regs->sp;
-	} else {
-		gdb_regs[GDB_SS] = __KERNEL_DS;
-		gdb_regs[GDB_SP] = kernel_stack_pointer(regs);
+	    regno == GDB_SS || regno == GDB_FS || regno == GDB_GS ||
+#endif
+	    regno == GDB_SP || regno == GDB_ORIG_AX)
+		return 0;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
+}
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno == GDB_ORIG_AX) {
+		memcpy(mem, &regs->orig_ax, sizeof(regs->orig_ax));
+		return "orig_ax";
 	}
-#else
-	gdb_regs[GDB_R8]	= regs->r8;
-	gdb_regs[GDB_R9]	= regs->r9;
-	gdb_regs[GDB_R10]	= regs->r10;
-	gdb_regs[GDB_R11]	= regs->r11;
-	gdb_regs[GDB_R12]	= regs->r12;
-	gdb_regs[GDB_R13]	= regs->r13;
-	gdb_regs[GDB_R14]	= regs->r14;
-	gdb_regs[GDB_R15]	= regs->r15;
-	gdb_regs32[GDB_PS]	= regs->flags;
-	gdb_regs32[GDB_CS]	= regs->cs;
-	gdb_regs32[GDB_SS]	= regs->ss;
-	gdb_regs[GDB_SP]	= kernel_stack_pointer(regs);
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+
+	switch (regno) {
+#ifdef CONFIG_X86_32
+	case GDB_SS:
+		if (!user_mode_vm(regs))
+			*(unsigned long *)mem = __KERNEL_DS;
+		break;
+	case GDB_SP:
+		if (!user_mode_vm(regs))
+			*(unsigned long *)mem = kernel_stack_pointer(regs);
+		break;
+	case GDB_GS:
+	case GDB_FS:
+		*(unsigned long *)mem = 0xFFFF;
+		break;
 #endif
+	}
+	return dbg_reg_def[regno].name;
 }
 
 /**
@@ -150,54 +189,13 @@ void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 	gdb_regs[GDB_SP]	= p->thread.sp;
 }
 
-/**
- *	gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
- *	@gdb_regs: A pointer to hold the registers we've received from GDB.
- *	@regs: A pointer to a &struct pt_regs to hold these values in.
- *
- *	Convert the GDB regs in @gdb_regs into the pt_regs, and store them
- *	in @regs.
- */
-void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
-{
-#ifndef CONFIG_X86_32
-	u32 *gdb_regs32 = (u32 *)gdb_regs;
-#endif
-	regs->ax		= gdb_regs[GDB_AX];
-	regs->bx		= gdb_regs[GDB_BX];
-	regs->cx		= gdb_regs[GDB_CX];
-	regs->dx		= gdb_regs[GDB_DX];
-	regs->si		= gdb_regs[GDB_SI];
-	regs->di		= gdb_regs[GDB_DI];
-	regs->bp		= gdb_regs[GDB_BP];
-	regs->ip		= gdb_regs[GDB_PC];
-#ifdef CONFIG_X86_32
-	regs->flags		= gdb_regs[GDB_PS];
-	regs->ds		= gdb_regs[GDB_DS];
-	regs->es		= gdb_regs[GDB_ES];
-	regs->cs		= gdb_regs[GDB_CS];
-#else
-	regs->r8		= gdb_regs[GDB_R8];
-	regs->r9		= gdb_regs[GDB_R9];
-	regs->r10		= gdb_regs[GDB_R10];
-	regs->r11		= gdb_regs[GDB_R11];
-	regs->r12		= gdb_regs[GDB_R12];
-	regs->r13		= gdb_regs[GDB_R13];
-	regs->r14		= gdb_regs[GDB_R14];
-	regs->r15		= gdb_regs[GDB_R15];
-	regs->flags		= gdb_regs32[GDB_PS];
-	regs->cs		= gdb_regs32[GDB_CS];
-	regs->ss		= gdb_regs32[GDB_SS];
-#endif
-}
-
 static struct hw_breakpoint {
 	unsigned		enabled;
 	unsigned long		addr;
 	int			len;
 	int			type;
 	struct perf_event	**pev;
-} breakinfo[4];
+} breakinfo[HBP_NUM];
 
 static unsigned long early_dr7;
 
@@ -205,7 +203,7 @@ static void kgdb_correct_hw_break(void)
 {
 	int breakno;
 
-	for (breakno = 0; breakno < 4; breakno++) {
+	for (breakno = 0; breakno < HBP_NUM; breakno++) {
 		struct perf_event *bp;
 		struct arch_hw_breakpoint *info;
 		int val;
@@ -292,10 +290,10 @@ kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 {
 	int i;
 
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < HBP_NUM; i++)
 		if (breakinfo[i].addr == addr && breakinfo[i].enabled)
 			break;
-	if (i == 4)
+	if (i == HBP_NUM)
 		return -1;
 
 	if (hw_break_release_slot(i)) {
@@ -313,7 +311,7 @@ static void kgdb_remove_all_hw_break(void)
 	int cpu = raw_smp_processor_id();
 	struct perf_event *bp;
 
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < HBP_NUM; i++) {
 		if (!breakinfo[i].enabled)
 			continue;
 		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
@@ -333,10 +331,10 @@ kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
 {
 	int i;
 
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < HBP_NUM; i++)
 		if (!breakinfo[i].enabled)
 			break;
-	if (i == 4)
+	if (i == HBP_NUM)
 		return -1;
 
 	switch (bptype) {
@@ -397,7 +395,7 @@ void kgdb_disable_hw_debug(struct pt_regs *regs)
 
 	/* Disable hardware debugging while we are in kgdb: */
 	set_debugreg(0UL, 7);
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < HBP_NUM; i++) {
 		if (!breakinfo[i].enabled)
 			continue;
 		if (dbg_is_early) {
@@ -458,7 +456,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 {
 	unsigned long addr;
 	char *ptr;
-	int newPC;
 
 	switch (remcomInBuffer[0]) {
 	case 'c':
@@ -469,8 +466,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 			linux_regs->ip = addr;
 	case 'D':
 	case 'k':
-		newPC = linux_regs->ip;
-
 		/* clear the trace bit */
 		linux_regs->flags &= ~X86_EFLAGS_TF;
 		atomic_set(&kgdb_cpu_doing_single_step, -1);
@@ -645,7 +640,7 @@ void kgdb_arch_late(void)
 	attr.bp_len = HW_BREAKPOINT_LEN_1;
 	attr.bp_type = HW_BREAKPOINT_W;
 	attr.disabled = 1;
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < HBP_NUM; i++) {
 		if (breakinfo[i].pev)
 			continue;
 		breakinfo[i].pev = register_wide_hw_breakpoint(&attr, NULL);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 675879b65ce..1bfb6cf4dd5 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -126,16 +126,22 @@ static void __kprobes synthesize_reljump(void *from, void *to)
 }
 
 /*
- * Check for the REX prefix which can only exist on X86_64
- * X86_32 always returns 0
+ * Skip the prefixes of the instruction.
  */
-static int __kprobes is_REX_prefix(kprobe_opcode_t *insn)
+static kprobe_opcode_t *__kprobes skip_prefixes(kprobe_opcode_t *insn)
 {
+	insn_attr_t attr;
+
+	attr = inat_get_opcode_attribute((insn_byte_t)*insn);
+	while (inat_is_legacy_prefix(attr)) {
+		insn++;
+		attr = inat_get_opcode_attribute((insn_byte_t)*insn);
+	}
 #ifdef CONFIG_X86_64
-	if ((*insn & 0xf0) == 0x40)
-		return 1;
+	if (inat_is_rex_prefix(attr))
+		insn++;
 #endif
-	return 0;
+	return insn;
 }
 
 /*
@@ -272,6 +278,9 @@ static int __kprobes can_probe(unsigned long paddr)
  */
 static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
 {
+	/* Skip prefixes */
+	insn = skip_prefixes(insn);
+
 	switch (*insn) {
 	case 0xfa:		/* cli */
 	case 0xfb:		/* sti */
@@ -280,13 +289,6 @@ static int __kprobes is_IF_modifier(kprobe_opcode_t *insn)
 		return 1;
 	}
 
-	/*
-	 * on X86_64, 0x40-0x4f are REX prefixes so we need to look
-	 * at the next byte instead.. but of course not recurse infinitely
-	 */
-	if (is_REX_prefix(insn))
-		return is_IF_modifier(++insn);
-
 	return 0;
 }
 
@@ -803,9 +805,8 @@ static void __kprobes resume_execution(struct kprobe *p,
 	unsigned long orig_ip = (unsigned long)p->addr;
 	kprobe_opcode_t *insn = p->ainsn.insn;
 
-	/*skip the REX prefix*/
-	if (is_REX_prefix(insn))
-		insn++;
+	/* Skip prefixes */
+	insn = skip_prefixes(insn);
 
 	regs->flags &= ~X86_EFLAGS_TF;
 	switch (*insn) {
diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c
index 5915e0b3330..79ae68154e8 100644
--- a/arch/x86/kernel/mrst.c
+++ b/arch/x86/kernel/mrst.c
@@ -25,8 +25,34 @@
 #include <asm/i8259.h>
 #include <asm/apb_timer.h>
 
+/*
+ * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
+ * cmdline option x86_mrst_timer can be used to override the configuration
+ * to prefer one or the other.
+ * at runtime, there are basically three timer configurations:
+ * 1. per cpu apbt clock only
+ * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only
+ * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast.
+ *
+ * by default (without cmdline option), platform code first detects cpu type
+ * to see if we are on lincroft or penwell, then set up both lapic or apbt
+ * clocks accordingly.
+ * i.e. by default, medfield uses configuration #2, moorestown uses #1.
+ * config #3 is supported but not recommended on medfield.
+ *
+ * rating and feature summary:
+ * lapic (with C3STOP) --------- 100
+ * apbt (always-on) ------------ 110
+ * lapic (always-on,ARAT) ------ 150
+ */
+
+__cpuinitdata enum mrst_timer_options mrst_timer_options;
+
 static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM];
 static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM];
+enum mrst_cpu_type __mrst_cpu_chip;
+EXPORT_SYMBOL_GPL(__mrst_cpu_chip);
+
 int sfi_mtimer_num;
 
 struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
@@ -167,18 +193,6 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 	return 0;
 }
 
-/*
- * the secondary clock in Moorestown can be APBT or LAPIC clock, default to
- * APBT but cmdline option can also override it.
- */
-static void __cpuinit mrst_setup_secondary_clock(void)
-{
-	/* restore default lapic clock if disabled by cmdline */
-	if (disable_apbt_percpu)
-		return setup_secondary_APIC_clock();
-	apbt_setup_secondary_clock();
-}
-
 static unsigned long __init mrst_calibrate_tsc(void)
 {
 	unsigned long flags, fast_calibrate;
@@ -195,6 +209,21 @@ static unsigned long __init mrst_calibrate_tsc(void)
 
 void __init mrst_time_init(void)
 {
+	switch (mrst_timer_options) {
+	case MRST_TIMER_APBT_ONLY:
+		break;
+	case MRST_TIMER_LAPIC_APBT:
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		break;
+	default:
+		if (!boot_cpu_has(X86_FEATURE_ARAT))
+			break;
+		x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock;
+		x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock;
+		return;
+	}
+	/* we need at least one APB timer */
 	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	pre_init_apic_IRQ0();
 	apbt_time_init();
@@ -205,16 +234,21 @@ void __init mrst_rtc_init(void)
 	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
 }
 
-/*
- * if we use per cpu apb timer, the bootclock already setup. if we use lapic
- * timer and one apbt timer for broadcast, we need to set up lapic boot clock.
- */
-static void __init mrst_setup_boot_clock(void)
+void __cpuinit mrst_arch_setup(void)
 {
-	pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu);
-	if (disable_apbt_percpu)
-		setup_boot_APIC_clock();
-};
+	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
+		__mrst_cpu_chip = MRST_CPU_CHIP_PENWELL;
+	else if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x26)
+		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	else {
+		pr_err("Unknown Moorestown CPU (%d:%d), default to Lincroft\n",
+			boot_cpu_data.x86, boot_cpu_data.x86_model);
+		__mrst_cpu_chip = MRST_CPU_CHIP_LINCROFT;
+	}
+	pr_debug("Moorestown CPU %s identified\n",
+		(__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT) ?
+		"Lincroft" : "Penwell");
+}
 
 /* MID systems don't have i8042 controller */
 static int mrst_i8042_detect(void)
@@ -232,11 +266,13 @@ void __init x86_mrst_early_setup(void)
 	x86_init.resources.reserve_resources = x86_init_noop;
 
 	x86_init.timers.timer_init = mrst_time_init;
-	x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
 
 	x86_init.irqs.pre_vector_init = x86_init_noop;
 
-	x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock;
+	x86_init.oem.arch_setup = mrst_arch_setup;
+
+	x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock;
 
 	x86_platform.calibrate_tsc = mrst_calibrate_tsc;
 	x86_platform.i8042_detect = mrst_i8042_detect;
@@ -250,3 +286,26 @@ void __init x86_mrst_early_setup(void)
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
 
 }
+
+/*
+ * if user does not want to use per CPU apb timer, just give it a lower rating
+ * than local apic timer and skip the late per cpu timer init.
+ */
+static inline int __init setup_x86_mrst_timer(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp("apbt_only", arg) == 0)
+		mrst_timer_options = MRST_TIMER_APBT_ONLY;
+	else if (strcmp("lapic_and_apbt", arg) == 0)
+		mrst_timer_options = MRST_TIMER_LAPIC_APBT;
+	else {
+		pr_warning("X86 MRST timer option %s not recognised"
+			   " use x86_mrst_timer=apbt_only or lapic_and_apbt\n",
+			   arg);
+		return -EINVAL;
+	}
+	return 0;
+}
+__setup("x86_mrst_timer=", setup_x86_mrst_timer);
diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 8297160c41b..0e0cdde519b 100644
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -21,10 +21,7 @@
 #include <asm/geode.h>
 #include <asm/setup.h>
 #include <asm/olpc.h>
-
-#ifdef CONFIG_OPEN_FIRMWARE
-#include <asm/ofw.h>
-#endif
+#include <asm/olpc_ofw.h>
 
 struct olpc_platform_t olpc_platform_info;
 EXPORT_SYMBOL_GPL(olpc_platform_info);
@@ -145,7 +142,7 @@ restart:
 	 * The OBF flag will sometimes misbehave due to what we believe
 	 * is a hardware quirk..
 	 */
-	printk(KERN_DEBUG "olpc-ec:  running cmd 0x%x\n", cmd);
+	pr_devel("olpc-ec:  running cmd 0x%x\n", cmd);
 	outb(cmd, 0x6c);
 
 	if (wait_on_ibf(0x6c, 0)) {
@@ -162,8 +159,7 @@ restart:
 						" EC accept data!\n");
 				goto err;
 			}
-			printk(KERN_DEBUG "olpc-ec:  sending cmd arg 0x%x\n",
-					inbuf[i]);
+			pr_devel("olpc-ec:  sending cmd arg 0x%x\n", inbuf[i]);
 			outb(inbuf[i], 0x68);
 		}
 	}
@@ -176,8 +172,7 @@ restart:
 				goto restart;
 			}
 			outbuf[i] = inb(0x68);
-			printk(KERN_DEBUG "olpc-ec:  received 0x%x\n",
-					outbuf[i]);
+			pr_devel("olpc-ec:  received 0x%x\n", outbuf[i]);
 		}
 	}
 
@@ -188,14 +183,15 @@ err:
 }
 EXPORT_SYMBOL_GPL(olpc_ec_cmd);
 
-#ifdef CONFIG_OPEN_FIRMWARE
+#ifdef CONFIG_OLPC_OPENFIRMWARE
 static void __init platform_detect(void)
 {
 	size_t propsize;
 	__be32 rev;
+	const void *args[] = { NULL, "board-revision-int", &rev, (void *)4 };
+	void *res[] = { &propsize };
 
-	if (ofw("getprop", 4, 1, NULL, "board-revision-int", &rev, 4,
-			&propsize) || propsize != 4) {
+	if (olpc_ofw("getprop", args, res) || propsize != 4) {
 		printk(KERN_ERR "ofw: getprop call failed!\n");
 		rev = cpu_to_be32(0);
 	}
diff --git a/arch/x86/kernel/olpc_ofw.c b/arch/x86/kernel/olpc_ofw.c
new file mode 100644
index 00000000000..3218aa71ab5
--- /dev/null
+++ b/arch/x86/kernel/olpc_ofw.c
@@ -0,0 +1,106 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/olpc_ofw.h>
+
+/* address of OFW callback interface; will be NULL if OFW isn't found */
+static int (*olpc_ofw_cif)(int *);
+
+/* page dir entry containing OFW's pgdir table; filled in by head_32.S */
+u32 olpc_ofw_pgd __initdata;
+
+static DEFINE_SPINLOCK(ofw_lock);
+
+#define MAXARGS 10
+
+void __init setup_olpc_ofw_pgd(void)
+{
+	pgd_t *base, *ofw_pde;
+
+	if (!olpc_ofw_cif)
+		return;
+
+	/* fetch OFW's PDE */
+	base = early_ioremap(olpc_ofw_pgd, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
+	if (!base) {
+		printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n");
+		olpc_ofw_cif = NULL;
+		return;
+	}
+	ofw_pde = &base[OLPC_OFW_PDE_NR];
+
+	/* install OFW's PDE permanently into the kernel's pgtable */
+	set_pgd(&swapper_pg_dir[OLPC_OFW_PDE_NR], *ofw_pde);
+	/* implicit optimization barrier here due to uninline function return */
+
+	early_iounmap(base, sizeof(olpc_ofw_pgd) * PTRS_PER_PGD);
+}
+
+int __olpc_ofw(const char *name, int nr_args, const void **args, int nr_res,
+		void **res)
+{
+	int ofw_args[MAXARGS + 3];
+	unsigned long flags;
+	int ret, i, *p;
+
+	BUG_ON(nr_args + nr_res > MAXARGS);
+
+	if (!olpc_ofw_cif)
+		return -EIO;
+
+	ofw_args[0] = (int)name;
+	ofw_args[1] = nr_args;
+	ofw_args[2] = nr_res;
+
+	p = &ofw_args[3];
+	for (i = 0; i < nr_args; i++, p++)
+		*p = (int)args[i];
+
+	/* call into ofw */
+	spin_lock_irqsave(&ofw_lock, flags);
+	ret = olpc_ofw_cif(ofw_args);
+	spin_unlock_irqrestore(&ofw_lock, flags);
+
+	if (!ret) {
+		for (i = 0; i < nr_res; i++, p++)
+			*((int *)res[i]) = *p;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(__olpc_ofw);
+
+/* OFW cif _should_ be above this address */
+#define OFW_MIN 0xff000000
+
+/* OFW starts on a 1MB boundary */
+#define OFW_BOUND (1<<20)
+
+void __init olpc_ofw_detect(void)
+{
+	struct olpc_ofw_header *hdr = &boot_params.olpc_ofw_header;
+	unsigned long start;
+
+	/* ensure OFW booted us by checking for "OFW " string */
+	if (hdr->ofw_magic != OLPC_OFW_SIG)
+		return;
+
+	olpc_ofw_cif = (int (*)(int *))hdr->cif_handler;
+
+	if ((unsigned long)olpc_ofw_cif < OFW_MIN) {
+		printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n",
+				(unsigned long)olpc_ofw_cif);
+		olpc_ofw_cif = NULL;
+		return;
+	}
+
+	/* determine where OFW starts in memory */
+	start = round_down((unsigned long)olpc_ofw_cif, OFW_BOUND);
+	printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n",
+			(unsigned long)olpc_ofw_cif, (-start) >> 20);
+	reserve_top_address(-start);
+}
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index cbcf013a0ec..d401f1d2d06 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -526,44 +526,10 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 	return (edx & MWAIT_EDX_C1);
 }
 
-/*
- * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e.
- * For more information see
- * - Erratum #400 for NPT family 0xf and family 0x10 CPUs
- * - Erratum #365 for family 0x11 (not affected because C1e not in use)
- */
-static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
-{
-	u64 val;
-	if (c->x86_vendor != X86_VENDOR_AMD)
-		goto no_c1e_idle;
-
-	/* Family 0x0f models < rev F do not have C1E */
-	if (c->x86 == 0x0F && c->x86_model >= 0x40)
-		return 1;
-
-	if (c->x86 == 0x10) {
-		/*
-		 * check OSVW bit for CPUs that are not affected
-		 * by erratum #400
-		 */
-		if (cpu_has(c, X86_FEATURE_OSVW)) {
-			rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val);
-			if (val >= 2) {
-				rdmsrl(MSR_AMD64_OSVW_STATUS, val);
-				if (!(val & BIT(1)))
-					goto no_c1e_idle;
-			}
-		}
-		return 1;
-	}
-
-no_c1e_idle:
-	return 0;
-}
+bool c1e_detected;
+EXPORT_SYMBOL(c1e_detected);
 
 static cpumask_var_t c1e_mask;
-static int c1e_detected;
 
 void c1e_remove_cpu(int cpu)
 {
@@ -585,12 +551,12 @@ static void c1e_idle(void)
 		u32 lo, hi;
 
 		rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi);
+
 		if (lo & K8_INTP_C1E_ACTIVE_MASK) {
-			c1e_detected = 1;
+			c1e_detected = true;
 			if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
 				mark_tsc_unstable("TSC halt in AMD C1E");
 			printk(KERN_INFO "System has AMD C1E enabled\n");
-			set_cpu_cap(&boot_cpu_data, X86_FEATURE_AMDC1E);
 		}
 	}
 
@@ -639,7 +605,8 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 		 */
 		printk(KERN_INFO "using mwait in idle threads.\n");
 		pm_idle = mwait_idle;
-	} else if (check_c1e_idle(c)) {
+	} else if (cpu_has_amd_erratum(amd_erratum_400)) {
+		/* E400: APIC timer interrupt does not wake up CPU from C1e */
 		printk(KERN_INFO "using C1E aware idle routine\n");
 		pm_idle = c1e_idle;
 	} else
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 8d128783af4..96586c3cbbb 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -57,6 +57,8 @@
 #include <asm/syscalls.h>
 #include <asm/debugreg.h>
 
+#include <trace/events/power.h>
+
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 /*
@@ -111,6 +113,8 @@ void cpu_idle(void)
 			stop_critical_timings();
 			pm_idle();
 			start_critical_timings();
+
+			trace_power_end(smp_processor_id());
 		}
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3c2422a99f1..3d9ea531ddd 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -51,6 +51,8 @@
 #include <asm/syscalls.h>
 #include <asm/debugreg.h>
 
+#include <trace/events/power.h>
+
 asmlinkage extern void ret_from_fork(void);
 
 DEFINE_PER_CPU(unsigned long, old_rsp);
@@ -138,6 +140,9 @@ void cpu_idle(void)
 			stop_critical_timings();
 			pm_idle();
 			start_critical_timings();
+
+			trace_power_end(smp_processor_id());
+
 			/* In many cases the interrupt that ended idle
 			   has already called exit_idle. But some idle
 			   loops can be woken up without interrupt. */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4ae4acbd03..b008e788320 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -102,6 +102,7 @@
 
 #include <asm/paravirt.h>
 #include <asm/hypervisor.h>
+#include <asm/olpc_ofw.h>
 
 #include <asm/percpu.h>
 #include <asm/topology.h>
@@ -736,10 +737,15 @@ void __init setup_arch(char **cmdline_p)
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
 	vmi_init();
 
+	/* OFW also may relocate the fixmap */
+	olpc_ofw_detect();
+
 	early_trap_init();
 	early_cpu_init();
 	early_ioremap_init();
 
+	setup_olpc_ofw_pgd();
+
 	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
 	screen_info = boot_params.screen_info;
 	edid_info = boot_params.edid_info;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index c4f33b2e77d..a5e928b0cb5 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -735,12 +735,8 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		goto do_rest;
 	}
 
-	if (!keventd_up() || current_is_keventd())
-		c_idle.work.func(&c_idle.work);
-	else {
-		schedule_work(&c_idle.work);
-		wait_for_completion(&c_idle.done);
-	}
+	schedule_work(&c_idle.work);
+	wait_for_completion(&c_idle.done);
 
 	if (IS_ERR(c_idle.idle)) {
 		printk("failed fork for CPU %d\n", cpu);
@@ -816,6 +812,13 @@ do_rest:
 			if (cpumask_test_cpu(cpu, cpu_callin_mask))
 				break;	/* It has booted */
 			udelay(100);
+			/*
+			 * Allow other tasks to run while we wait for the
+			 * AP to come online. This also gives a chance
+			 * for the MTRR work(triggered by the AP coming online)
+			 * to be completed in the stop machine context.
+			 */
+			schedule();
 		}
 
 		if (cpumask_test_cpu(cpu, cpu_callin_mask))
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 922eefbb3f6..b53c525368a 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -23,11 +23,16 @@ static int save_stack_stack(void *data, char *name)
 	return 0;
 }
 
-static void save_stack_address(void *data, unsigned long addr, int reliable)
+static void
+__save_stack_address(void *data, unsigned long addr, bool reliable, bool nosched)
 {
 	struct stack_trace *trace = data;
+#ifdef CONFIG_FRAME_POINTER
 	if (!reliable)
 		return;
+#endif
+	if (nosched && in_sched_functions(addr))
+		return;
 	if (trace->skip > 0) {
 		trace->skip--;
 		return;
@@ -36,20 +41,15 @@ static void save_stack_address(void *data, unsigned long addr, int reliable)
 		trace->entries[trace->nr_entries++] = addr;
 }
 
+static void save_stack_address(void *data, unsigned long addr, int reliable)
+{
+	return __save_stack_address(data, addr, reliable, false);
+}
+
 static void
 save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
-	struct stack_trace *trace = (struct stack_trace *)data;
-	if (!reliable)
-		return;
-	if (in_sched_functions(addr))
-		return;
-	if (trace->skip > 0) {
-		trace->skip--;
-		return;
-	}
-	if (trace->nr_entries < trace->max_entries)
-		trace->entries[trace->nr_entries++] = addr;
+	return __save_stack_address(data, addr, reliable, true);
 }
 
 static const struct stacktrace_ops save_stack_ops = {
@@ -96,12 +96,13 @@ EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
 /* Userspace stacktrace - based on kernel/trace/trace_sysprof.c */
 
-struct stack_frame {
+struct stack_frame_user {
 	const void __user	*next_fp;
 	unsigned long		ret_addr;
 };
 
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+static int
+copy_stack_frame(const void __user *fp, struct stack_frame_user *frame)
 {
 	int ret;
 
@@ -126,7 +127,7 @@ static inline void __save_stack_trace_user(struct stack_trace *trace)
 		trace->entries[trace->nr_entries++] = regs->ip;
 
 	while (trace->nr_entries < trace->max_entries) {
-		struct stack_frame frame;
+		struct stack_frame_user frame;
 
 		frame.next_fp = NULL;
 		frame.ret_addr = 0;
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 725ef4d17cd..60788dee0f8 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -392,7 +392,13 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
 								== NOTIFY_STOP)
 			return;
+
 #ifdef CONFIG_X86_LOCAL_APIC
+		if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
+							== NOTIFY_STOP)
+			return;
+
+#ifndef CONFIG_LOCKUP_DETECTOR
 		/*
 		 * Ok, so this is none of the documented NMI sources,
 		 * so it must be the NMI watchdog.
@@ -400,6 +406,7 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 		if (nmi_watchdog_tick(regs, reason))
 			return;
 		if (!do_nmi_callback(regs, cpu))
+#endif /* !CONFIG_LOCKUP_DETECTOR */
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 9faf91ae184..ce8e5023933 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -751,7 +751,6 @@ static struct clocksource clocksource_tsc = {
 	.read                   = read_tsc,
 	.resume			= resume_tsc,
 	.mask                   = CLOCKSOURCE_MASK(64),
-	.shift                  = 22,
 	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS |
 				  CLOCK_SOURCE_MUST_VERIFY,
 #ifdef CONFIG_X86_64
@@ -845,8 +844,6 @@ __cpuinit int unsynchronized_tsc(void)
 
 static void __init init_tsc_clocksource(void)
 {
-	clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
-			clocksource_tsc.shift);
 	if (tsc_clocksource_reliable)
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
 	/* lower the rating if we already know its unstable: */
@@ -854,7 +851,7 @@ static void __init init_tsc_clocksource(void)
 		clocksource_tsc.rating = 0;
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
 	}
-	clocksource_register(&clocksource_tsc);
+	clocksource_register_khz(&clocksource_tsc, tsc_khz);
 }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu_64.S
index 45b6f8a975a..56a8c2a867d 100644
--- a/arch/x86/kernel/verify_cpu_64.S
+++ b/arch/x86/kernel/verify_cpu_64.S
@@ -31,6 +31,7 @@
  */
 
 #include <asm/cpufeature.h>
+#include <asm/msr-index.h>
 
 verify_cpu:
 	pushfl				# Save caller passed flags
@@ -88,7 +89,7 @@ verify_cpu_sse_test:
 	je	verify_cpu_sse_ok
 	test	%di,%di
 	jz	verify_cpu_no_longmode	# only try to force SSE on AMD
-	movl	$0xc0010015,%ecx	# HWCR
+	movl	$MSR_K7_HWCR,%ecx
 	rdmsr
 	btr	$15,%eax		# enable SSE
 	wrmsr
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 1c0c6ab9c60..dcbb28c4b69 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -73,8 +73,8 @@ void update_vsyscall_tz(void)
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
 
-void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
-		     u32 mult)
+void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
+			struct clocksource *clock, u32 mult)
 {
 	unsigned long flags;
 
@@ -87,7 +87,7 @@ void update_vsyscall(struct timespec *wall_time, struct clocksource *clock,
 	vsyscall_gtod_data.clock.shift = clock->shift;
 	vsyscall_gtod_data.wall_time_sec = wall_time->tv_sec;
 	vsyscall_gtod_data.wall_time_nsec = wall_time->tv_nsec;
-	vsyscall_gtod_data.wall_to_monotonic = wall_to_monotonic;
+	vsyscall_gtod_data.wall_to_monotonic = *wtm;
 	vsyscall_gtod_data.wall_time_coarse = __current_kernel_time();
 	write_sequnlock_irqrestore(&vsyscall_gtod_data.lock, flags);
 }
@@ -169,13 +169,18 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
  * unlikely */
 time_t __vsyscall(1) vtime(time_t *t)
 {
-	struct timeval tv;
+	unsigned seq;
 	time_t result;
 	if (unlikely(!__vsyscall_gtod_data.sysctl_enabled))
 		return time_syscall(t);
 
-	vgettimeofday(&tv, NULL);
-	result = tv.tv_sec;
+	do {
+		seq = read_seqbegin(&__vsyscall_gtod_data.lock);
+
+		result = __vsyscall_gtod_data.wall_time_sec;
+
+	} while (read_seqretry(&__vsyscall_gtod_data.lock, seq));
+
 	if (t)
 		*t = result;
 	return result;
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 37e68fc5e24..9c253bd65e2 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -16,11 +16,88 @@
  */
 u64 pcntxt_mask;
 
+/*
+ * Represents init state for the supported extended state.
+ */
+static struct xsave_struct *init_xstate_buf;
+
 struct _fpx_sw_bytes fx_sw_reserved;
 #ifdef CONFIG_IA32_EMULATION
 struct _fpx_sw_bytes fx_sw_reserved_ia32;
 #endif
 
+static unsigned int *xstate_offsets, *xstate_sizes, xstate_features;
+
+/*
+ * If a processor implementation discern that a processor state component is
+ * in its initialized state it may modify the corresponding bit in the
+ * xsave_hdr.xstate_bv as '0', with out modifying the corresponding memory
+ * layout in the case of xsaveopt. While presenting the xstate information to
+ * the user, we always ensure that the memory layout of a feature will be in
+ * the init state if the corresponding header bit is zero. This is to ensure
+ * that the user doesn't see some stale state in the memory layout during
+ * signal handling, debugging etc.
+ */
+void __sanitize_i387_state(struct task_struct *tsk)
+{
+	u64 xstate_bv;
+	int feature_bit = 0x2;
+	struct i387_fxsave_struct *fx = &tsk->thread.fpu.state->fxsave;
+
+	if (!fx)
+		return;
+
+	BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+
+	xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
+
+	/*
+	 * None of the feature bits are in init state. So nothing else
+	 * to do for us, as the memory layout is upto date.
+	 */
+	if ((xstate_bv & pcntxt_mask) == pcntxt_mask)
+		return;
+
+	/*
+	 * FP is in init state
+	 */
+	if (!(xstate_bv & XSTATE_FP)) {
+		fx->cwd = 0x37f;
+		fx->swd = 0;
+		fx->twd = 0;
+		fx->fop = 0;
+		fx->rip = 0;
+		fx->rdp = 0;
+		memset(&fx->st_space[0], 0, 128);
+	}
+
+	/*
+	 * SSE is in init state
+	 */
+	if (!(xstate_bv & XSTATE_SSE))
+		memset(&fx->xmm_space[0], 0, 256);
+
+	xstate_bv = (pcntxt_mask & ~xstate_bv) >> 2;
+
+	/*
+	 * Update all the other memory layouts for which the corresponding
+	 * header bit is in the init state.
+	 */
+	while (xstate_bv) {
+		if (xstate_bv & 0x1) {
+			int offset = xstate_offsets[feature_bit];
+			int size = xstate_sizes[feature_bit];
+
+			memcpy(((void *) fx) + offset,
+			       ((void *) init_xstate_buf) + offset,
+			       size);
+		}
+
+		xstate_bv >>= 1;
+		feature_bit++;
+	}
+}
+
 /*
  * Check for the presence of extended state information in the
  * user fpstate pointer in the sigcontext.
@@ -36,15 +113,14 @@ int check_for_xstate(struct i387_fxsave_struct __user *buf,
 
 	err = __copy_from_user(fx_sw_user, &buf->sw_reserved[0],
 			       sizeof(struct _fpx_sw_bytes));
-
 	if (err)
-		return err;
+		return -EFAULT;
 
 	/*
 	 * First Magic check failed.
 	 */
 	if (fx_sw_user->magic1 != FP_XSTATE_MAGIC1)
-		return -1;
+		return -EINVAL;
 
 	/*
 	 * Check for error scenarios.
@@ -52,19 +128,21 @@ int check_for_xstate(struct i387_fxsave_struct __user *buf,
 	if (fx_sw_user->xstate_size < min_xstate_size ||
 	    fx_sw_user->xstate_size > xstate_size ||
 	    fx_sw_user->xstate_size > fx_sw_user->extended_size)
-		return -1;
+		return -EINVAL;
 
 	err = __get_user(magic2, (__u32 *) (((void *)fpstate) +
 					    fx_sw_user->extended_size -
 					    FP_XSTATE_MAGIC2_SIZE));
+	if (err)
+		return err;
 	/*
 	 * Check for the presence of second magic word at the end of memory
 	 * layout. This detects the case where the user just copied the legacy
 	 * fpstate layout with out copying the extended state information
 	 * in the memory layout.
 	 */
-	if (err || magic2 != FP_XSTATE_MAGIC2)
-		return -1;
+	if (magic2 != FP_XSTATE_MAGIC2)
+		return -EFAULT;
 
 	return 0;
 }
@@ -91,14 +169,6 @@ int save_i387_xstate(void __user *buf)
 		return 0;
 
 	if (task_thread_info(tsk)->status & TS_USEDFPU) {
-		/*
-	 	 * Start with clearing the user buffer. This will present a
-	 	 * clean context for the bytes not touched by the fxsave/xsave.
-		 */
-		err = __clear_user(buf, sig_xstate_size);
-		if (err)
-			return err;
-
 		if (use_xsave())
 			err = xsave_user(buf);
 		else
@@ -109,6 +179,7 @@ int save_i387_xstate(void __user *buf)
 		task_thread_info(tsk)->status &= ~TS_USEDFPU;
 		stts();
 	} else {
+		sanitize_i387_state(tsk);
 		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
 				   xstate_size))
 			return -1;
@@ -184,8 +255,8 @@ static int restore_user_xstate(void __user *buf)
 	 * init the state skipped by the user.
 	 */
 	mask = pcntxt_mask & ~mask;
-
-	xrstor_state(init_xstate_buf, mask);
+	if (unlikely(mask))
+		xrstor_state(init_xstate_buf, mask);
 
 	return 0;
 
@@ -274,11 +345,6 @@ static void prepare_fx_sw_frame(void)
 #endif
 }
 
-/*
- * Represents init state for the supported extended state.
- */
-struct xsave_struct *init_xstate_buf;
-
 #ifdef CONFIG_X86_64
 unsigned int sig_xstate_size = sizeof(struct _fpstate);
 #endif
@@ -286,37 +352,77 @@ unsigned int sig_xstate_size = sizeof(struct _fpstate);
 /*
  * Enable the extended processor state save/restore feature
  */
-void __cpuinit xsave_init(void)
+static inline void xstate_enable(void)
 {
-	if (!cpu_has_xsave)
-		return;
-
 	set_in_cr4(X86_CR4_OSXSAVE);
-
-	/*
-	 * Enable all the features that the HW is capable of
-	 * and the Linux kernel is aware of.
-	 */
 	xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
 }
 
 /*
+ * Record the offsets and sizes of different state managed by the xsave
+ * memory layout.
+ */
+static void __init setup_xstate_features(void)
+{
+	int eax, ebx, ecx, edx, leaf = 0x2;
+
+	xstate_features = fls64(pcntxt_mask);
+	xstate_offsets = alloc_bootmem(xstate_features * sizeof(int));
+	xstate_sizes = alloc_bootmem(xstate_features * sizeof(int));
+
+	do {
+		cpuid_count(XSTATE_CPUID, leaf, &eax, &ebx, &ecx, &edx);
+
+		if (eax == 0)
+			break;
+
+		xstate_offsets[leaf] = ebx;
+		xstate_sizes[leaf] = eax;
+
+		leaf++;
+	} while (1);
+}
+
+/*
  * setup the xstate image representing the init state
  */
 static void __init setup_xstate_init(void)
 {
+	setup_xstate_features();
+
+	/*
+	 * Setup init_xstate_buf to represent the init state of
+	 * all the features managed by the xsave
+	 */
 	init_xstate_buf = alloc_bootmem(xstate_size);
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
+
+	clts();
+	/*
+	 * Init all the features state with header_bv being 0x0
+	 */
+	xrstor_state(init_xstate_buf, -1);
+	/*
+	 * Dump the init state again. This is to identify the init state
+	 * of any feature which is not represented by all zero's.
+	 */
+	xsave_state(init_xstate_buf, -1);
+	stts();
 }
 
 /*
  * Enable and initialize the xsave feature.
  */
-void __ref xsave_cntxt_init(void)
+static void __init xstate_enable_boot_cpu(void)
 {
 	unsigned int eax, ebx, ecx, edx;
 
-	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	if (boot_cpu_data.cpuid_level < XSTATE_CPUID) {
+		WARN(1, KERN_ERR "XSTATE_CPUID missing\n");
+		return;
+	}
+
+	cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx);
 	pcntxt_mask = eax + ((u64)edx << 32);
 
 	if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
@@ -329,12 +435,13 @@ void __ref xsave_cntxt_init(void)
 	 * Support only the state known to OS.
 	 */
 	pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
-	xsave_init();
+
+	xstate_enable();
 
 	/*
 	 * Recompute the context size for enabled features
 	 */
-	cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
+	cpuid_count(XSTATE_CPUID, 0, &eax, &ebx, &ecx, &edx);
 	xstate_size = ebx;
 
 	update_regset_xstate_info(xstate_size, pcntxt_mask);
@@ -346,3 +453,23 @@ void __ref xsave_cntxt_init(void)
 	       "cntxt size 0x%x\n",
 	       pcntxt_mask, xstate_size);
 }
+
+/*
+ * For the very first instance, this calls xstate_enable_boot_cpu();
+ * for all subsequent instances, this calls xstate_enable().
+ *
+ * This is somewhat obfuscated due to the lack of powerful enough
+ * overrides for the section checks.
+ */
+void __cpuinit xsave_init(void)
+{
+	static __refdata void (*next_func)(void) = xstate_enable_boot_cpu;
+	void (*this_func)(void);
+
+	if (!cpu_has_xsave)
+		return;
+
+	this_func = next_func;
+	next_func = xstate_enable;
+	this_func();
+}
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0dcc95e0987..311f6dad895 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -281,11 +281,7 @@ static gfn_t pse36_gfn_delta(u32 gpte)
 
 static void __set_spte(u64 *sptep, u64 spte)
 {
-#ifdef CONFIG_X86_64
-	set_64bit((unsigned long *)sptep, spte);
-#else
-	set_64bit((unsigned long long *)sptep, spte);
-#endif
+	set_64bit(sptep, spte);
 }
 
 static u64 __xchg_spte(u64 *sptep, u64 new_spte)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 56c9b6bd765..bc5b9b8d4a3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -131,7 +131,7 @@ static struct svm_direct_access_msrs {
 	u32 index;   /* Index of the MSR */
 	bool always; /* True if intercept is always on */
 } direct_access_msrs[] = {
-	{ .index = MSR_K6_STAR,				.always = true  },
+	{ .index = MSR_STAR,				.always = true  },
 	{ .index = MSR_IA32_SYSENTER_CS,		.always = true  },
 #ifdef CONFIG_X86_64
 	{ .index = MSR_GS_BASE,				.always = true  },
@@ -384,8 +384,7 @@ static void svm_init_erratum_383(void)
 	int err;
 	u64 val;
 
-	/* Only Fam10h is affected */
-	if (boot_cpu_data.x86 != 0x10)
+	if (!cpu_has_amd_erratum(amd_erratum_383))
 		return;
 
 	/* Use _safe variants to not break nested virtualization */
@@ -2433,7 +2432,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = tsc_offset + native_read_tsc();
 		break;
 	}
-	case MSR_K6_STAR:
+	case MSR_STAR:
 		*data = svm->vmcb->save.star;
 		break;
 #ifdef CONFIG_X86_64
@@ -2557,7 +2556,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 
 		break;
 	}
-	case MSR_K6_STAR:
+	case MSR_STAR:
 		svm->vmcb->save.star = data;
 		break;
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 27a0222c294..49b25eee25a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -240,14 +240,14 @@ static u64 host_efer;
 static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
 
 /*
- * Keep MSR_K6_STAR at the end, as setup_msrs() will try to optimize it
+ * Keep MSR_STAR at the end, as setup_msrs() will try to optimize it
  * away by decrementing the array size.
  */
 static const u32 vmx_msr_index[] = {
 #ifdef CONFIG_X86_64
 	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR,
 #endif
-	MSR_EFER, MSR_TSC_AUX, MSR_K6_STAR,
+	MSR_EFER, MSR_TSC_AUX, MSR_STAR,
 };
 #define NR_VMX_MSR ARRAY_SIZE(vmx_msr_index)
 
@@ -1117,10 +1117,10 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 		if (index >= 0 && vmx->rdtscp_enabled)
 			move_msr_up(vmx, index, save_nmsrs++);
 		/*
-		 * MSR_K6_STAR is only needed on long mode guests, and only
+		 * MSR_STAR is only needed on long mode guests, and only
 		 * if efer.sce is enabled.
 		 */
-		index = __find_msr_index(vmx, MSR_K6_STAR);
+		index = __find_msr_index(vmx, MSR_STAR);
 		if ((index >= 0) && (vmx->vcpu.arch.efer & EFER_SCE))
 			move_msr_up(vmx, index, save_nmsrs++);
 	}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 97aab036dab..25f19078b32 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -733,7 +733,7 @@ static u32 msrs_to_save[] = {
 	HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
 	HV_X64_MSR_APIC_ASSIST_PAGE,
 	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
-	MSR_K6_STAR,
+	MSR_STAR,
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f871e04b696..e10cf070ede 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -30,6 +30,7 @@ ifeq ($(CONFIG_X86_32),y)
         lib-y += checksum_32.o
         lib-y += strstr_32.o
         lib-y += semaphore_32.o string_32.o
+        lib-y += cmpxchg.o
 ifneq ($(CONFIG_X86_CMPXCHG64),y)
         lib-y += cmpxchg8b_emu.o atomic64_386_32.o
 endif
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index ebeafcce04a..aa4326bfb24 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -52,7 +52,7 @@ ENDPROC(clear_page)
 	.align 8
 	.quad clear_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lclear_page_end - clear_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/kernel/cpu/cmpxchg.c b/arch/x86/lib/cmpxchg.c
index 2056ccf572c..5d619f6df3e 100644
--- a/arch/x86/kernel/cpu/cmpxchg.c
+++ b/arch/x86/lib/cmpxchg.c
@@ -52,21 +52,3 @@ unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
 }
 EXPORT_SYMBOL(cmpxchg_386_u32);
 #endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
-{
-	u64 prev;
-	unsigned long flags;
-
-	/* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
-	local_irq_save(flags);
-	prev = *(u64 *)ptr;
-	if (prev == old)
-		*(u64 *)ptr = new;
-	local_irq_restore(flags);
-	return prev;
-}
-EXPORT_SYMBOL(cmpxchg_486_u64);
-#endif
-
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 727a5d46d2f..6fec2d1cebe 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -113,7 +113,7 @@ ENDPROC(copy_page)
 	.align 8
 	.quad copy_page
 	.quad 1b
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lcopy_page_end - copy_page
 	.byte 2b - 1b
 	.previous
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 71100c98e33..a460158b5ac 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -29,7 +29,7 @@
 	.align 8
 	.quad  0b
 	.quad  2b
-	.byte  \feature			/* when feature is set */
+	.word  \feature			/* when feature is set */
 	.byte  5
 	.byte  5
 	.previous
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index f82e884928a..bcbcd1e0f7d 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -131,7 +131,7 @@ ENDPROC(__memcpy)
 	.align 8
 	.quad memcpy
 	.quad .Lmemcpy_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 
 	/*
 	 * Replace only beginning, memcpy is used to apply alternatives,
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index e88d3b81644..09d34426965 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -121,7 +121,7 @@ ENDPROC(__memset)
 	.align 8
 	.quad memset
 	.quad .Lmemset_c
-	.byte X86_FEATURE_REP_GOOD
+	.word X86_FEATURE_REP_GOOD
 	.byte .Lfinal - memset
 	.byte .Lmemset_e - .Lmemset_c
 	.previous
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index a725b7f760a..0002a3a3308 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -37,6 +37,28 @@ struct addr_marker {
 	const char *name;
 };
 
+/* indices for address_markers; keep sync'd w/ address_markers below */
+enum address_markers_idx {
+	USER_SPACE_NR = 0,
+#ifdef CONFIG_X86_64
+	KERNEL_SPACE_NR,
+	LOW_KERNEL_NR,
+	VMALLOC_START_NR,
+	VMEMMAP_START_NR,
+	HIGH_KERNEL_NR,
+	MODULES_VADDR_NR,
+	MODULES_END_NR,
+#else
+	KERNEL_SPACE_NR,
+	VMALLOC_START_NR,
+	VMALLOC_END_NR,
+# ifdef CONFIG_HIGHMEM
+	PKMAP_BASE_NR,
+# endif
+	FIXADDR_START_NR,
+#endif
+};
+
 /* Address space markers hints */
 static struct addr_marker address_markers[] = {
 	{ 0, "User Space" },
@@ -331,14 +353,12 @@ static int pt_dump_init(void)
 
 #ifdef CONFIG_X86_32
 	/* Not a compile-time constant on x86-32 */
-	address_markers[2].start_address = VMALLOC_START;
-	address_markers[3].start_address = VMALLOC_END;
+	address_markers[VMALLOC_START_NR].start_address = VMALLOC_START;
+	address_markers[VMALLOC_END_NR].start_address = VMALLOC_END;
 # ifdef CONFIG_HIGHMEM
-	address_markers[4].start_address = PKMAP_BASE;
-	address_markers[5].start_address = FIXADDR_START;
-# else
-	address_markers[4].start_address = FIXADDR_START;
+	address_markers[PKMAP_BASE_NR].start_address = PKMAP_BASE;
 # endif
+	address_markers[FIXADDR_START_NR].start_address = FIXADDR_START;
 #endif
 
 	pe = debugfs_create_file("kernel_page_tables", 0600, NULL, NULL,
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 63a6ba66cbe..5e8fa12ef86 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -53,7 +53,7 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	return kmap_atomic_prot(page, type, kmap_prot);
 }
 
-void kunmap_atomic(void *kvaddr, enum km_type type)
+void kunmap_atomic_notypecheck(void *kvaddr, enum km_type type)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
@@ -102,7 +102,7 @@ struct page *kmap_atomic_to_page(void *ptr)
 EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
-EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic_notypecheck);
 EXPORT_SYMBOL(kmap_atomic_prot);
 EXPORT_SYMBOL(kmap_atomic_to_page);
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 12e4d2d3c11..3ba6e0608c5 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -62,8 +62,8 @@ int ioremap_change_attr(unsigned long vaddr, unsigned long size,
 static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 		unsigned long size, unsigned long prot_val, void *caller)
 {
-	unsigned long pfn, offset, vaddr;
-	resource_size_t last_addr;
+	unsigned long offset, vaddr;
+	resource_size_t pfn, last_pfn, last_addr;
 	const resource_size_t unaligned_phys_addr = phys_addr;
 	const unsigned long unaligned_size = size;
 	struct vm_struct *area;
@@ -100,10 +100,8 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
-	for (pfn = phys_addr >> PAGE_SHIFT;
-				(pfn << PAGE_SHIFT) < (last_addr & PAGE_MASK);
-				pfn++) {
-
+	last_pfn = last_addr >> PAGE_SHIFT;
+	for (pfn = phys_addr >> PAGE_SHIFT; pfn <= last_pfn; pfn++) {
 		int is_ram = page_is_ram(pfn);
 
 		if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)))
@@ -115,7 +113,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	 * Mappings have to be page-aligned
 	 */
 	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
+	phys_addr &= PHYSICAL_PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
 	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
@@ -613,7 +611,7 @@ void __init early_iounmap(void __iomem *addr, unsigned long size)
 		return;
 	}
 	offset = virt_addr & ~PAGE_MASK;
-	nrpages = PAGE_ALIGN(offset + size - 1) >> PAGE_SHIFT;
+	nrpages = PAGE_ALIGN(offset + size) >> PAGE_SHIFT;
 
 	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
 	while (nrpages > 0) {
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 5d0e67fff1a..e5d5e2ce9f7 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -45,6 +45,8 @@ struct kmmio_fault_page {
 	 * Protected by kmmio_lock, when linked into kmmio_page_table.
 	 */
 	int count;
+
+	bool scheduled_for_release;
 };
 
 struct kmmio_delayed_release {
@@ -398,8 +400,11 @@ static void release_kmmio_fault_page(unsigned long page,
 	BUG_ON(f->count < 0);
 	if (!f->count) {
 		disarm_kmmio_fault_page(f);
-		f->release_next = *release_list;
-		*release_list = f;
+		if (!f->scheduled_for_release) {
+			f->release_next = *release_list;
+			*release_list = f;
+			f->scheduled_for_release = true;
+		}
 	}
 }
 
@@ -471,8 +476,10 @@ static void remove_kmmio_fault_pages(struct rcu_head *head)
 			prevp = &f->release_next;
 		} else {
 			*prevp = f->release_next;
+			f->release_next = NULL;
+			f->scheduled_for_release = false;
 		}
-		f = f->release_next;
+		f = *prevp;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
@@ -510,6 +517,9 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 	kmmio_count--;
 	spin_unlock_irqrestore(&kmmio_lock, flags);
 
+	if (!release_list)
+		return;
+
 	drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC);
 	if (!drelease) {
 		pr_crit("leaking kmmio_fault_page objects.\n");
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 64121a18b8c..f6ff57b7efa 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -158,7 +158,7 @@ static unsigned long pat_x_mtrr_type(u64 start, u64 end, unsigned long req_type)
 	return req_type;
 }
 
-static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
+static int pat_pagerange_is_ram(resource_size_t start, resource_size_t end)
 {
 	int ram_page = 0, not_rampage = 0;
 	unsigned long page_nr;
diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c
index 308e32570d8..38e6d174c49 100644
--- a/arch/x86/mm/pf_in.c
+++ b/arch/x86/mm/pf_in.c
@@ -40,16 +40,16 @@ static unsigned char prefix_codes[] = {
 static unsigned int reg_rop[] = {
 	0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
 };
-static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB };
 static unsigned int imm_wop[] = { 0xC6, 0xC7 };
 /* IA32 Manual 3, 3-432*/
-static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 };
+static unsigned int rw8[] = { 0x88, 0x8A, 0xC6, 0xAA };
 static unsigned int rw32[] = {
-	0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+	0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB
 };
-static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F };
+static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F, 0xAA };
 static unsigned int mw16[] = { 0xB70F, 0xBF0F };
-static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 };
+static unsigned int mw32[] = { 0x89, 0x8B, 0xC7, 0xAB };
 static unsigned int mw64[] = {};
 #else /* not __i386__ */
 static unsigned char prefix_codes[] = {
@@ -63,20 +63,20 @@ static unsigned char prefix_codes[] = {
 static unsigned int reg_rop[] = {
 	0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
 };
-static unsigned int reg_wop[] = { 0x88, 0x89 };
+static unsigned int reg_wop[] = { 0x88, 0x89, 0xAA, 0xAB };
 static unsigned int imm_wop[] = { 0xC6, 0xC7 };
-static unsigned int rw8[] = { 0xC6, 0x88, 0x8A };
+static unsigned int rw8[] = { 0xC6, 0x88, 0x8A, 0xAA };
 static unsigned int rw32[] = {
-	0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F
+	0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F, 0xAB
 };
 /* 8 bit only */
-static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F };
+static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F, 0xAA };
 /* 16 bit only */
 static unsigned int mw16[] = { 0xB70F, 0xBF0F };
 /* 16 or 32 bit */
 static unsigned int mw32[] = { 0xC7 };
 /* 16, 32 or 64 bit */
-static unsigned int mw64[] = { 0x89, 0x8B };
+static unsigned int mw64[] = { 0x89, 0x8B, 0xAB };
 #endif /* not __i386__ */
 
 struct prefix_bits {
@@ -410,7 +410,6 @@ static unsigned long *get_reg_w32(int no, struct pt_regs *regs)
 unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
 {
 	unsigned int opcode;
-	unsigned char mod_rm;
 	int reg;
 	unsigned char *p;
 	struct prefix_bits prf;
@@ -437,8 +436,13 @@ unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs)
 	goto err;
 
 do_work:
-	mod_rm = *p;
-	reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3);
+	/* for STOS, source register is fixed */
+	if (opcode == 0xAA || opcode == 0xAB) {
+		reg = arg_AX;
+	} else {
+		unsigned char mod_rm = *p;
+		reg = ((mod_rm >> 3) & 0x7) | (prf.rexr << 3);
+	}
 	switch (get_ins_reg_width(ins_addr)) {
 	case 1:
 		return *get_reg_w8(reg, prf.rex, regs);
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
index 8565d944f7c..38868adf07e 100644
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -90,6 +90,27 @@ static void do_test(unsigned long size)
 	iounmap(p);
 }
 
+/*
+ * Tests how mmiotrace behaves in face of multiple ioremap / iounmaps in
+ * a short time. We had a bug in deferred freeing procedure which tried
+ * to free this region multiple times (ioremap can reuse the same address
+ * for many mappings).
+ */
+static void do_test_bulk_ioremapping(void)
+{
+	void __iomem *p;
+	int i;
+
+	for (i = 0; i < 10; ++i) {
+		p = ioremap_nocache(mmio_address, PAGE_SIZE);
+		if (p)
+			iounmap(p);
+	}
+
+	/* Force freeing. If it will crash we will know why. */
+	synchronize_rcu();
+}
+
 static int __init init(void)
 {
 	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
@@ -104,6 +125,7 @@ static int __init init(void)
 		   "and writing 16 kB of rubbish in there.\n",
 		   size >> 10, mmio_address);
 	do_test(size);
+	do_test_bulk_ioremapping();
 	pr_info("All done.\n");
 	return 0;
 }
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 426f3a1a64d..c03f14ab666 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -278,11 +278,9 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 
 static void do_flush_tlb_all(void *info)
 {
-	unsigned long cpu = smp_processor_id();
-
 	__flush_tlb_all();
 	if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
-		leave_mm(cpu);
+		leave_mm(smp_processor_id());
 }
 
 void flush_tlb_all(void)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b28d2f1253b..1ba67dc8006 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -634,6 +634,18 @@ static int __init ppro_init(char **cpu_type)
 	if (force_arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
 
+	/*
+	 * Documentation on identifying Intel processors by CPU family
+	 * and model can be found in the Intel Software Developer's
+	 * Manuals (SDM):
+	 *
+	 *  http://www.intel.com/products/processor/manuals/
+	 *
+	 * As of May 2010 the documentation for this was in the:
+	 * "Intel 64 and IA-32 Architectures Software Developer's
+	 * Manual Volume 3B: System Programming Guide", "Table B-1
+	 * CPUID Signature Values of DisplayFamily_DisplayModel".
+	 */
 	switch (cpu_model) {
 	case 0 ... 2:
 		*cpu_type = "i386/ppro";
@@ -655,12 +667,12 @@ static int __init ppro_init(char **cpu_type)
 	case 15: case 23:
 		*cpu_type = "i386/core_2";
 		break;
+	case 0x1a:
 	case 0x2e:
-	case 26:
 		spec = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
 		break;
-	case 28:
+	case 0x1c:
 		*cpu_type = "i386/atom";
 		break;
 	default:
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 2ec04c424a6..15466c096ba 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -34,6 +34,15 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
+	/* 2006 AMD HT/VIA system with two host bridges */
+        {
+		.callback = set_use_crs,
+		.ident = "ASRock ALiveSATA2-GLAN",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
+                },
+        },
 	{}
 };
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 215a27ae050..a0772af64ef 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -125,6 +125,23 @@ void __init dmi_check_skip_isa_align(void)
 static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 {
 	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+	struct resource *bar_r;
+	int bar;
+
+	if (pci_probe & PCI_NOASSIGN_BARS) {
+		/*
+		* If the BIOS did not assign the BAR, zero out the
+		* resource so the kernel doesn't attmept to assign
+		* it later on in pci_assign_unassigned_resources
+		*/
+		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
+			bar_r = &dev->resource[bar];
+			if (bar_r->start == 0 && bar_r->end != 0) {
+				bar_r->flags = 0;
+				bar_r->end = 0;
+			}
+		}
+	}
 
 	if (pci_probe & PCI_NOASSIGN_ROMS) {
 		if (rom_r->parent)
@@ -509,6 +526,9 @@ char * __devinit  pcibios_setup(char *str)
 	} else if (!strcmp(str, "norom")) {
 		pci_probe |= PCI_NOASSIGN_ROMS;
 		return NULL;
+	} else if (!strcmp(str, "nobar")) {
+		pci_probe |= PCI_NOASSIGN_BARS;
+		return NULL;
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 9810a0f76c9..f547ee05f71 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -989,7 +989,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq);
 
 	/* Update IRQ for all devices with the same pirq value */
-	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
+	for_each_pci_dev(dev2) {
 		pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin);
 		if (!pin)
 			continue;
@@ -1028,7 +1028,7 @@ void __init pcibios_fixup_irqs(void)
 	u8 pin;
 
 	DBG(KERN_DEBUG "PCI: IRQ fixup\n");
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 		/*
 		 * If the BIOS has set an out of range IRQ number, just
 		 * ignore it.  Also keep track of which IRQ's are
@@ -1052,7 +1052,7 @@ void __init pcibios_fixup_irqs(void)
 		return;
 
 	dev = NULL;
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 		if (!pin)
 			continue;
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 8d460eaf524..c89266be604 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -36,7 +36,7 @@ int __init pci_legacy_init(void)
 	return 0;
 }
 
-void pcibios_scan_specific_bus(int busn)
+void __devinit pcibios_scan_specific_bus(int busn)
 {
 	int devfn;
 	long node;
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 6b4ffedb93c..4a2afa1bac5 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -120,7 +120,8 @@ $(obj)/vdso32-syms.lds: $(vdso32.so-y:%=$(obj)/vdso32-%-syms.lds) FORCE
 quiet_cmd_vdso = VDSO    $@
       cmd_vdso = $(CC) -nostdlib -o $@ \
 		       $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
-		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^)
+		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
+		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
 VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 GCOV_PROFILE := n
diff --git a/arch/x86/vdso/checkundef.sh b/arch/x86/vdso/checkundef.sh
new file mode 100755
index 00000000000..7ee90a9b549
--- /dev/null
+++ b/arch/x86/vdso/checkundef.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+nm="$1"
+file="$2"
+$nm "$file" | grep '^ *U' > /dev/null 2>&1
+if [ $? -eq 1 ]; then
+    exit 0
+else
+    echo "$file: undefined symbols found" >&2
+    exit 1
+fi
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 02b442e9200..36df991985b 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -374,7 +374,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 
 #ifdef CONFIG_X86_64
 
-__initcall(sysenter_setup);
+subsys_initcall(sysenter_setup);
 
 #ifdef CONFIG_SYSCTL
 /* Register vsyscall32 into the ABI table */
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index ac74869b814..4b5d26f108b 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -67,6 +67,7 @@ static int __init init_vdso_vars(void)
 	*(typeof(__ ## x) **) var_ref(VDSO64_SYMBOL(vbase, x), #x) = &__ ## x;
 #include "vextern.h"
 #undef VEXTERN
+	vunmap(vbase);
 	return 0;
 
  oom:
@@ -74,7 +75,7 @@ static int __init init_vdso_vars(void)
 	vdso_enabled = 0;
 	return -ENOMEM;
 }
-__initcall(init_vdso_vars);
+subsys_initcall(init_vdso_vars);
 
 struct linux_binprm;
 
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index b83e119fbeb..68128a1b401 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -13,6 +13,11 @@ config XEN
 	  kernel to boot in a paravirtualized environment under the
 	  Xen hypervisor.
 
+config XEN_PVHVM
+	def_bool y
+	depends on XEN
+	depends on X86_LOCAL_APIC
+
 config XEN_MAX_DOMAIN_MEMORY
        int "Maximum allowed size of a domain in gigabytes"
        default 8 if X86_32
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3bb4fc21f4f..93095468598 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -12,7 +12,7 @@ CFLAGS_mmu.o			:= $(nostackp)
 
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
-			grant-table.o suspend.o
+			grant-table.o suspend.o platform-pci-unplug.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 65d8d79b46a..d4ff5e83621 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -11,6 +11,7 @@
  * Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
  */
 
+#include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/smp.h>
@@ -35,8 +36,10 @@
 #include <xen/interface/version.h>
 #include <xen/interface/physdev.h>
 #include <xen/interface/vcpu.h>
+#include <xen/interface/memory.h>
 #include <xen/features.h>
 #include <xen/page.h>
+#include <xen/hvm.h>
 #include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
@@ -55,7 +58,9 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
+#include <asm/setup.h>
 #include <asm/stackprotector.h>
+#include <asm/hypervisor.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -76,6 +81,10 @@ struct shared_info xen_dummy_shared_info;
 
 void *xen_initial_gdt;
 
+RESERVE_BRK(shared_info_page_brk, PAGE_SIZE);
+__read_mostly int xen_have_vector_callback;
+EXPORT_SYMBOL_GPL(xen_have_vector_callback);
+
 /*
  * Point at some empty memory to start with. We map the real shared_info
  * page as soon as fixmap is up and running.
@@ -97,6 +106,14 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
  */
 static int have_vcpu_info_placement = 1;
 
+static void clamp_max_cpus(void)
+{
+#ifdef CONFIG_SMP
+	if (setup_max_cpus > MAX_VIRT_CPUS)
+		setup_max_cpus = MAX_VIRT_CPUS;
+#endif
+}
+
 static void xen_vcpu_setup(int cpu)
 {
 	struct vcpu_register_vcpu_info info;
@@ -104,13 +121,17 @@ static void xen_vcpu_setup(int cpu)
 	struct vcpu_info *vcpup;
 
 	BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
-	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
-	if (!have_vcpu_info_placement)
-		return;		/* already tested, not available */
+	if (cpu < MAX_VIRT_CPUS)
+		per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
-	vcpup = &per_cpu(xen_vcpu_info, cpu);
+	if (!have_vcpu_info_placement) {
+		if (cpu >= MAX_VIRT_CPUS)
+			clamp_max_cpus();
+		return;
+	}
 
+	vcpup = &per_cpu(xen_vcpu_info, cpu);
 	info.mfn = arbitrary_virt_to_mfn(vcpup);
 	info.offset = offset_in_page(vcpup);
 
@@ -125,6 +146,7 @@ static void xen_vcpu_setup(int cpu)
 	if (err) {
 		printk(KERN_DEBUG "register_vcpu_info failed: err=%d\n", err);
 		have_vcpu_info_placement = 0;
+		clamp_max_cpus();
 	} else {
 		/* This cpu is using the registered vcpu info, even if
 		   later ones fail to. */
@@ -731,7 +753,6 @@ static void set_xen_basic_apic_ops(void)
 
 #endif
 
-
 static void xen_clts(void)
 {
 	struct multicall_space mcs;
@@ -926,10 +947,6 @@ static const struct pv_init_ops xen_init_ops __initdata = {
 	.patch = xen_patch,
 };
 
-static const struct pv_time_ops xen_time_ops __initdata = {
-	.sched_clock = xen_sched_clock,
-};
-
 static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.cpuid = xen_cpuid,
 
@@ -1028,6 +1045,23 @@ static void xen_crash_shutdown(struct pt_regs *regs)
 	xen_reboot(SHUTDOWN_crash);
 }
 
+static int
+xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	xen_reboot(SHUTDOWN_crash);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block xen_panic_block = {
+	.notifier_call= xen_panic_event,
+};
+
+int xen_panic_handler_init(void)
+{
+	atomic_notifier_chain_register(&panic_notifier_list, &xen_panic_block);
+	return 0;
+}
+
 static const struct machine_ops __initdata xen_machine_ops = {
 	.restart = xen_restart,
 	.halt = xen_machine_halt,
@@ -1067,7 +1101,6 @@ asmlinkage void __init xen_start_kernel(void)
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
-	pv_time_ops = xen_time_ops;
 	pv_cpu_ops = xen_cpu_ops;
 	pv_apic_ops = xen_apic_ops;
 
@@ -1075,13 +1108,7 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_init.oem.arch_setup = xen_arch_setup;
 	x86_init.oem.banner = xen_banner;
 
-	x86_init.timers.timer_init = xen_time_init;
-	x86_init.timers.setup_percpu_clockev = x86_init_noop;
-	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
-
-	x86_platform.calibrate_tsc = xen_tsc_khz;
-	x86_platform.get_wallclock = xen_get_wallclock;
-	x86_platform.set_wallclock = xen_set_wallclock;
+	xen_init_time_ops();
 
 	/*
 	 * Set up some pagetable state before starting to set any ptes.
@@ -1206,3 +1233,139 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
 #endif
 }
+
+static uint32_t xen_cpuid_base(void)
+{
+	uint32_t base, eax, ebx, ecx, edx;
+	char signature[13];
+
+	for (base = 0x40000000; base < 0x40010000; base += 0x100) {
+		cpuid(base, &eax, &ebx, &ecx, &edx);
+		*(uint32_t *)(signature + 0) = ebx;
+		*(uint32_t *)(signature + 4) = ecx;
+		*(uint32_t *)(signature + 8) = edx;
+		signature[12] = 0;
+
+		if (!strcmp("XenVMMXenVMM", signature) && ((eax - base) >= 2))
+			return base;
+	}
+
+	return 0;
+}
+
+static int init_hvm_pv_info(int *major, int *minor)
+{
+	uint32_t eax, ebx, ecx, edx, pages, msr, base;
+	u64 pfn;
+
+	base = xen_cpuid_base();
+	cpuid(base + 1, &eax, &ebx, &ecx, &edx);
+
+	*major = eax >> 16;
+	*minor = eax & 0xffff;
+	printk(KERN_INFO "Xen version %d.%d.\n", *major, *minor);
+
+	cpuid(base + 2, &pages, &msr, &ecx, &edx);
+
+	pfn = __pa(hypercall_page);
+	wrmsr_safe(msr, (u32)pfn, (u32)(pfn >> 32));
+
+	xen_setup_features();
+
+	pv_info = xen_info;
+	pv_info.kernel_rpl = 0;
+
+	xen_domain_type = XEN_HVM_DOMAIN;
+
+	return 0;
+}
+
+void xen_hvm_init_shared_info(void)
+{
+	int cpu;
+	struct xen_add_to_physmap xatp;
+	static struct shared_info *shared_info_page = 0;
+
+	if (!shared_info_page)
+		shared_info_page = (struct shared_info *)
+			extend_brk(PAGE_SIZE, PAGE_SIZE);
+	xatp.domid = DOMID_SELF;
+	xatp.idx = 0;
+	xatp.space = XENMAPSPACE_shared_info;
+	xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT;
+	if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp))
+		BUG();
+
+	HYPERVISOR_shared_info = (struct shared_info *)shared_info_page;
+
+	/* xen_vcpu is a pointer to the vcpu_info struct in the shared_info
+	 * page, we use it in the event channel upcall and in some pvclock
+	 * related functions. We don't need the vcpu_info placement
+	 * optimizations because we don't use any pv_mmu or pv_irq op on
+	 * HVM.
+	 * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is
+	 * online but xen_hvm_init_shared_info is run at resume time too and
+	 * in that case multiple vcpus might be online. */
+	for_each_online_cpu(cpu) {
+		per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+	}
+}
+
+#ifdef CONFIG_XEN_PVHVM
+static int __cpuinit xen_hvm_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
+{
+	int cpu = (long)hcpu;
+	switch (action) {
+	case CPU_UP_PREPARE:
+		per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata xen_hvm_cpu_notifier = {
+	.notifier_call	= xen_hvm_cpu_notify,
+};
+
+static void __init xen_hvm_guest_init(void)
+{
+	int r;
+	int major, minor;
+
+	r = init_hvm_pv_info(&major, &minor);
+	if (r < 0)
+		return;
+
+	xen_hvm_init_shared_info();
+
+	if (xen_feature(XENFEAT_hvm_callback_vector))
+		xen_have_vector_callback = 1;
+	register_cpu_notifier(&xen_hvm_cpu_notifier);
+	xen_unplug_emulated_devices();
+	have_vcpu_info_placement = 0;
+	x86_init.irqs.intr_init = xen_init_IRQ;
+	xen_hvm_init_time_ops();
+	xen_hvm_init_mmu_ops();
+}
+
+static bool __init xen_hvm_platform(void)
+{
+	if (xen_pv_domain())
+		return false;
+
+	if (!xen_cpuid_base())
+		return false;
+
+	return true;
+}
+
+const __refconst struct hypervisor_x86 x86_hyper_xen_hvm = {
+	.name			= "Xen HVM",
+	.detect			= xen_hvm_platform,
+	.init_platform		= xen_hvm_guest_init,
+};
+EXPORT_SYMBOL(x86_hyper_xen_hvm);
+#endif
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 914f04695ce..413b19b3d0f 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -58,6 +58,7 @@
 
 #include <xen/page.h>
 #include <xen/interface/xen.h>
+#include <xen/interface/hvm/hvm_op.h>
 #include <xen/interface/version.h>
 #include <xen/hvc-console.h>
 
@@ -1941,6 +1942,40 @@ void __init xen_init_mmu_ops(void)
 	pv_mmu_ops = xen_mmu_ops;
 }
 
+#ifdef CONFIG_XEN_PVHVM
+static void xen_hvm_exit_mmap(struct mm_struct *mm)
+{
+	struct xen_hvm_pagetable_dying a;
+	int rc;
+
+	a.domid = DOMID_SELF;
+	a.gpa = __pa(mm->pgd);
+	rc = HYPERVISOR_hvm_op(HVMOP_pagetable_dying, &a);
+	WARN_ON_ONCE(rc < 0);
+}
+
+static int is_pagetable_dying_supported(void)
+{
+	struct xen_hvm_pagetable_dying a;
+	int rc = 0;
+
+	a.domid = DOMID_SELF;
+	a.gpa = 0x00;
+	rc = HYPERVISOR_hvm_op(HVMOP_pagetable_dying, &a);
+	if (rc < 0) {
+		printk(KERN_DEBUG "HVMOP_pagetable_dying not supported\n");
+		return 0;
+	}
+	return 1;
+}
+
+void __init xen_hvm_init_mmu_ops(void)
+{
+	if (is_pagetable_dying_supported())
+		pv_mmu_ops.exit_mmap = xen_hvm_exit_mmap;
+}
+#endif
+
 #ifdef CONFIG_XEN_DEBUG_FS
 
 static struct dentry *d_mmu_debug;
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 5fe6bc7f5ec..fa938c4aa2f 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -60,4 +60,5 @@ void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 unsigned long xen_read_cr2_direct(void);
 
 extern void xen_init_mmu_ops(void);
+extern void xen_hvm_init_mmu_ops(void);
 #endif	/* _XEN_MMU_H */
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
new file mode 100644
index 00000000000..554c002a1e1
--- /dev/null
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -0,0 +1,137 @@
+/******************************************************************************
+ * platform-pci-unplug.c
+ *
+ * Xen platform PCI device driver
+ * Copyright (c) 2010, Citrix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <xen/platform_pci.h>
+
+#define XEN_PLATFORM_ERR_MAGIC -1
+#define XEN_PLATFORM_ERR_PROTOCOL -2
+#define XEN_PLATFORM_ERR_BLACKLIST -3
+
+/* store the value of xen_emul_unplug after the unplug is done */
+int xen_platform_pci_unplug;
+EXPORT_SYMBOL_GPL(xen_platform_pci_unplug);
+#ifdef CONFIG_XEN_PVHVM
+static int xen_emul_unplug;
+
+static int __init check_platform_magic(void)
+{
+	short magic;
+	char protocol;
+
+	magic = inw(XEN_IOPORT_MAGIC);
+	if (magic != XEN_IOPORT_MAGIC_VAL) {
+		printk(KERN_ERR "Xen Platform PCI: unrecognised magic value\n");
+		return XEN_PLATFORM_ERR_MAGIC;
+	}
+
+	protocol = inb(XEN_IOPORT_PROTOVER);
+
+	printk(KERN_DEBUG "Xen Platform PCI: I/O protocol version %d\n",
+			protocol);
+
+	switch (protocol) {
+	case 1:
+		outw(XEN_IOPORT_LINUX_PRODNUM, XEN_IOPORT_PRODNUM);
+		outl(XEN_IOPORT_LINUX_DRVVER, XEN_IOPORT_DRVVER);
+		if (inw(XEN_IOPORT_MAGIC) != XEN_IOPORT_MAGIC_VAL) {
+			printk(KERN_ERR "Xen Platform: blacklisted by host\n");
+			return XEN_PLATFORM_ERR_BLACKLIST;
+		}
+		break;
+	default:
+		printk(KERN_WARNING "Xen Platform PCI: unknown I/O protocol version");
+		return XEN_PLATFORM_ERR_PROTOCOL;
+	}
+
+	return 0;
+}
+
+void __init xen_unplug_emulated_devices(void)
+{
+	int r;
+
+	/* check the version of the xen platform PCI device */
+	r = check_platform_magic();
+	/* If the version matches enable the Xen platform PCI driver.
+	 * Also enable the Xen platform PCI driver if the version is really old
+	 * and the user told us to ignore it. */
+	if (r && !(r == XEN_PLATFORM_ERR_MAGIC &&
+			(xen_emul_unplug & XEN_UNPLUG_IGNORE)))
+		return;
+	/* Set the default value of xen_emul_unplug depending on whether or
+	 * not the Xen PV frontends and the Xen platform PCI driver have
+	 * been compiled for this kernel (modules or built-in are both OK). */
+	if (!xen_emul_unplug) {
+		if (xen_must_unplug_nics()) {
+			printk(KERN_INFO "Netfront and the Xen platform PCI driver have "
+					"been compiled for this kernel: unplug emulated NICs.\n");
+			xen_emul_unplug |= XEN_UNPLUG_ALL_NICS;
+		}
+		if (xen_must_unplug_disks()) {
+			printk(KERN_INFO "Blkfront and the Xen platform PCI driver have "
+					"been compiled for this kernel: unplug emulated disks.\n"
+					"You might have to change the root device\n"
+					"from /dev/hd[a-d] to /dev/xvd[a-d]\n"
+					"in your root= kernel command line option\n");
+			xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS;
+		}
+	}
+	/* Now unplug the emulated devices */
+	if (!(xen_emul_unplug & XEN_UNPLUG_IGNORE))
+		outw(xen_emul_unplug, XEN_IOPORT_UNPLUG);
+	xen_platform_pci_unplug = xen_emul_unplug;
+}
+
+static int __init parse_xen_emul_unplug(char *arg)
+{
+	char *p, *q;
+	int l;
+
+	for (p = arg; p; p = q) {
+		q = strchr(p, ',');
+		if (q) {
+			l = q - p;
+			q++;
+		} else {
+			l = strlen(p);
+		}
+		if (!strncmp(p, "all", l))
+			xen_emul_unplug |= XEN_UNPLUG_ALL;
+		else if (!strncmp(p, "ide-disks", l))
+			xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS;
+		else if (!strncmp(p, "aux-ide-disks", l))
+			xen_emul_unplug |= XEN_UNPLUG_AUX_IDE_DISKS;
+		else if (!strncmp(p, "nics", l))
+			xen_emul_unplug |= XEN_UNPLUG_ALL_NICS;
+		else if (!strncmp(p, "ignore", l))
+			xen_emul_unplug |= XEN_UNPLUG_IGNORE;
+		else
+			printk(KERN_WARNING "unrecognised option '%s' "
+				 "in parameter 'xen_emul_unplug'\n", p);
+	}
+	return 0;
+}
+early_param("xen_emul_unplug", parse_xen_emul_unplug);
+#endif
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index ad0047f47cd..328b0030542 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -20,6 +20,7 @@
 #include <xen/page.h>
 #include <xen/interface/callback.h>
 #include <xen/interface/physdev.h>
+#include <xen/interface/memory.h>
 #include <xen/features.h>
 
 #include "xen-ops.h"
@@ -32,6 +33,73 @@ extern void xen_sysenter_target(void);
 extern void xen_syscall_target(void);
 extern void xen_syscall32_target(void);
 
+static unsigned long __init xen_release_chunk(phys_addr_t start_addr,
+					      phys_addr_t end_addr)
+{
+	struct xen_memory_reservation reservation = {
+		.address_bits = 0,
+		.extent_order = 0,
+		.domid        = DOMID_SELF
+	};
+	unsigned long start, end;
+	unsigned long len = 0;
+	unsigned long pfn;
+	int ret;
+
+	start = PFN_UP(start_addr);
+	end = PFN_DOWN(end_addr);
+
+	if (end <= start)
+		return 0;
+
+	printk(KERN_INFO "xen_release_chunk: looking at area pfn %lx-%lx: ",
+	       start, end);
+	for(pfn = start; pfn < end; pfn++) {
+		unsigned long mfn = pfn_to_mfn(pfn);
+
+		/* Make sure pfn exists to start with */
+		if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
+			continue;
+
+		set_xen_guest_handle(reservation.extent_start, &mfn);
+		reservation.nr_extents = 1;
+
+		ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
+					   &reservation);
+		WARN(ret != 1, "Failed to release memory %lx-%lx err=%d\n",
+		     start, end, ret);
+		if (ret == 1) {
+			set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
+			len++;
+		}
+	}
+	printk(KERN_CONT "%ld pages freed\n", len);
+
+	return len;
+}
+
+static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
+						     const struct e820map *e820)
+{
+	phys_addr_t max_addr = PFN_PHYS(max_pfn);
+	phys_addr_t last_end = 0;
+	unsigned long released = 0;
+	int i;
+
+	for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
+		phys_addr_t end = e820->map[i].addr;
+		end = min(max_addr, end);
+
+		released += xen_release_chunk(last_end, end);
+		last_end = e820->map[i].addr + e820->map[i].size;
+	}
+
+	if (last_end < max_addr)
+		released += xen_release_chunk(last_end, max_addr);
+
+	printk(KERN_INFO "released %ld pages of unused memory\n", released);
+	return released;
+}
 
 /**
  * machine_specific_memory_setup - Hook for machine specific memory setup.
@@ -67,6 +135,8 @@ char * __init xen_memory_setup(void)
 
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
+	xen_return_unused_memory(xen_start_info->nr_pages, &e820);
+
 	return "Xen";
 }
 
@@ -156,6 +226,8 @@ void __init xen_arch_setup(void)
 	struct physdev_set_iopl set_iopl;
 	int rc;
 
+	xen_panic_handler_init();
+
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
 
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index a29693fd313..25f232b18a8 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -394,6 +394,8 @@ static void stop_self(void *v)
 	load_cr3(swapper_pg_dir);
 	/* should set up a minimal gdt */
 
+	set_cpu_online(cpu, false);
+
 	HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL);
 	BUG();
 }
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index a9c66110803..1d789d56877 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -26,6 +26,18 @@ void xen_pre_suspend(void)
 		BUG();
 }
 
+void xen_hvm_post_suspend(int suspend_cancelled)
+{
+	int cpu;
+	xen_hvm_init_shared_info();
+	xen_callback_vector();
+	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
+		for_each_online_cpu(cpu) {
+			xen_setup_runstate_info(cpu);
+		}
+	}
+}
+
 void xen_post_suspend(int suspend_cancelled)
 {
 	xen_build_mfn_list_list();
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index b3c6c59ed30..1a5353a753f 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -20,6 +20,7 @@
 #include <asm/xen/hypercall.h>
 
 #include <xen/events.h>
+#include <xen/features.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/vcpu.h>
 
@@ -155,47 +156,8 @@ static void do_stolen_accounting(void)
 	account_idle_ticks(ticks);
 }
 
-/*
- * Xen sched_clock implementation.  Returns the number of unstolen
- * nanoseconds, which is nanoseconds the VCPU spent in RUNNING+BLOCKED
- * states.
- */
-unsigned long long xen_sched_clock(void)
-{
-	struct vcpu_runstate_info state;
-	cycle_t now;
-	u64 ret;
-	s64 offset;
-
-	/*
-	 * Ideally sched_clock should be called on a per-cpu basis
-	 * anyway, so preempt should already be disabled, but that's
-	 * not current practice at the moment.
-	 */
-	preempt_disable();
-
-	now = xen_clocksource_read();
-
-	get_runstate_snapshot(&state);
-
-	WARN_ON(state.state != RUNSTATE_running);
-
-	offset = now - state.state_entry_time;
-	if (offset < 0)
-		offset = 0;
-
-	ret = state.time[RUNSTATE_blocked] +
-		state.time[RUNSTATE_running] +
-		offset;
-
-	preempt_enable();
-
-	return ret;
-}
-
-
 /* Get the TSC speed from Xen */
-unsigned long xen_tsc_khz(void)
+static unsigned long xen_tsc_khz(void)
 {
 	struct pvclock_vcpu_time_info *info =
 		&HYPERVISOR_shared_info->vcpu_info[0].time;
@@ -230,7 +192,7 @@ static void xen_read_wallclock(struct timespec *ts)
 	put_cpu_var(xen_vcpu);
 }
 
-unsigned long xen_get_wallclock(void)
+static unsigned long xen_get_wallclock(void)
 {
 	struct timespec ts;
 
@@ -238,7 +200,7 @@ unsigned long xen_get_wallclock(void)
 	return ts.tv_sec;
 }
 
-int xen_set_wallclock(unsigned long now)
+static int xen_set_wallclock(unsigned long now)
 {
 	/* do nothing for domU */
 	return -1;
@@ -473,7 +435,11 @@ void xen_timer_resume(void)
 	}
 }
 
-__init void xen_time_init(void)
+static const struct pv_time_ops xen_time_ops __initdata = {
+	.sched_clock = xen_clocksource_read,
+};
+
+static __init void xen_time_init(void)
 {
 	int cpu = smp_processor_id();
 	struct timespec tp;
@@ -497,3 +463,47 @@ __init void xen_time_init(void)
 	xen_setup_timer(cpu);
 	xen_setup_cpu_clockevents();
 }
+
+__init void xen_init_time_ops(void)
+{
+	pv_time_ops = xen_time_ops;
+
+	x86_init.timers.timer_init = xen_time_init;
+	x86_init.timers.setup_percpu_clockev = x86_init_noop;
+	x86_cpuinit.setup_percpu_clockev = x86_init_noop;
+
+	x86_platform.calibrate_tsc = xen_tsc_khz;
+	x86_platform.get_wallclock = xen_get_wallclock;
+	x86_platform.set_wallclock = xen_set_wallclock;
+}
+
+#ifdef CONFIG_XEN_PVHVM
+static void xen_hvm_setup_cpu_clockevents(void)
+{
+	int cpu = smp_processor_id();
+	xen_setup_runstate_info(cpu);
+	xen_setup_timer(cpu);
+	xen_setup_cpu_clockevents();
+}
+
+__init void xen_hvm_init_time_ops(void)
+{
+	/* vector callback is needed otherwise we cannot receive interrupts
+	 * on cpu > 0 */
+	if (!xen_have_vector_callback && num_present_cpus() > 1)
+		return;
+	if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
+		printk(KERN_INFO "Xen doesn't support pvclock on HVM,"
+				"disable pv timer\n");
+		return;
+	}
+
+	pv_time_ops = xen_time_ops;
+	x86_init.timers.setup_percpu_clockev = xen_time_init;
+	x86_cpuinit.setup_percpu_clockev = xen_hvm_setup_cpu_clockevents;
+
+	x86_platform.calibrate_tsc = xen_tsc_khz;
+	x86_platform.get_wallclock = xen_get_wallclock;
+	x86_platform.set_wallclock = xen_set_wallclock;
+}
+#endif
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index f9153a300bc..7c8ab86163e 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -38,6 +38,10 @@ void xen_enable_sysenter(void);
 void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
+void xen_callback_vector(void);
+void xen_hvm_init_shared_info(void);
+void __init xen_unplug_emulated_devices(void);
+
 void __init xen_build_dynamic_phys_to_machine(void);
 
 void xen_init_irq_ops(void);
@@ -46,11 +50,8 @@ void xen_setup_runstate_info(int cpu);
 void xen_teardown_timer(int cpu);
 cycle_t xen_clocksource_read(void);
 void xen_setup_cpu_clockevents(void);
-unsigned long xen_tsc_khz(void);
-void __init xen_time_init(void);
-unsigned long xen_get_wallclock(void);
-int xen_set_wallclock(unsigned long time);
-unsigned long long xen_sched_clock(void);
+void __init xen_init_time_ops(void);
+void __init xen_hvm_init_time_ops(void);
 
 irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
 
@@ -101,4 +102,6 @@ void xen_sysret32(void);
 void xen_sysret64(void);
 void xen_adjust_exception_frame(void);
 
+extern int xen_panic_handler_init(void);
+
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index ebe228d02b0..0859bfd8ae9 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -48,9 +48,6 @@ config HZ
 	int
 	default 100
 
-config GENERIC_TIME
-	def_bool y
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 4caffac3ca2..7608559de93 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -35,6 +35,8 @@ KBUILD_CFLAGS += -ffreestanding
 
 KBUILD_CFLAGS += -pipe -mlongcalls
 
+KBUILD_CFLAGS += $(call cc-option,-mforce-no-pic,)
+
 vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y))
 plfdirs := $(patsubst %,arch/xtensa/platforms/%/,$(platform-y))
 
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index f19854035e6..7368164843b 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -1,193 +1,214 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Fri Feb 25 19:21:24 2005
+# Linux kernel version: 2.6.34-rc6
+# Tue Aug  3 00:10:54 2010
 #
-CONFIG_FRAME_POINTER=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_ZONE_DMA=y
 CONFIG_XTENSA=y
-# CONFIG_UID16 is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_NO_IOPORT=y
+CONFIG_HZ=100
+CONFIG_GENERIC_TIME=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_MMU=y
+# CONFIG_VARIANT_IRQ_SWITCH is not set
 
 #
 # Processor type and features
 #
 CONFIG_XTENSA_VARIANT_FSF=y
-CONFIG_MMU=y
+# CONFIG_XTENSA_VARIANT_DC232B is not set
+# CONFIG_XTENSA_VARIANT_S6000 is not set
 # CONFIG_XTENSA_UNALIGNED_USER is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_MATH_EMULATION is not set
-# CONFIG_HIGHMEM is not set
-
-#
-# Platform options
-#
-CONFIG_XTENSA_PLATFORM_ISS=y
-# CONFIG_XTENSA_PLATFORM_XT2000 is not set
-# CONFIG_XTENSA_PLATFORM_ARUBA is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
-CONFIG_XTENSA_CPU_CLOCK=10
-# CONFIG_GENERIC_CALIBRATE_DELAY is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_XTENSA_ISS_NETWORK=y
 
 #
 # Bus options
 #
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# PCI Hotplug Support
-#
-
+# Platform options
 #
-# Exectuable file formats
+CONFIG_XTENSA_PLATFORM_ISS=y
+# CONFIG_XTENSA_PLATFORM_XT2000 is not set
+# CONFIG_XTENSA_PLATFORM_S6105 is not set
+# CONFIG_GENERIC_CALIBRATE_DELAY is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target"
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+
+#
+# Executable file formats
 #
 CONFIG_KCORE_ELF=y
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -199,21 +220,28 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -221,77 +249,126 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-# CONFIG_NET_CLS_ROUTE is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
 
 #
-# ISDN subsystem
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_ISDN is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
 
 #
-# Telephony Support
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
 #
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
 # Input Device Drivers
 #
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -302,117 +379,159 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Dallas's 1-wire bus
+# PPS support
 #
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
 
 #
-# USB support
+# Special HID drivers
 #
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
 
 #
-# MMC/SD Card support
+# OTG and related infrastructure
 #
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# InfiniBand support
+# TI VLYNQ
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -432,19 +551,14 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -452,29 +566,22 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -485,43 +592,175 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index a508f2f73bd..376cd9d5f45 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -115,6 +115,7 @@ extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned lon
 #define flush_cache_vmap(start,end)			do { } while (0)
 #define flush_cache_vunmap(start,end)			do { } while (0)
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)				do { } while (0)
 
 #define flush_cache_page(vma,addr,pfn)			do { } while (0)
diff --git a/arch/xtensa/include/asm/coprocessor.h b/arch/xtensa/include/asm/coprocessor.h
index 65a285d8d3f..75c94a1658b 100644
--- a/arch/xtensa/include/asm/coprocessor.h
+++ b/arch/xtensa/include/asm/coprocessor.h
@@ -13,6 +13,7 @@
 #define _XTENSA_COPROCESSOR_H
 
 #include <linux/stringify.h>
+#include <variant/core.h>
 #include <variant/tie.h>
 #include <asm/types.h>
 
diff --git a/arch/xtensa/include/asm/elf.h b/arch/xtensa/include/asm/elf.h
index 5eb6d695e98..6e65eadaae1 100644
--- a/arch/xtensa/include/asm/elf.h
+++ b/arch/xtensa/include/asm/elf.h
@@ -14,6 +14,7 @@
 #define _XTENSA_ELF_H
 
 #include <asm/ptrace.h>
+#include <asm/coprocessor.h>
 
 /* Xtensa processor ELF architecture-magic number */
 
diff --git a/arch/xtensa/include/asm/local64.h b/arch/xtensa/include/asm/local64.h
new file mode 100644
index 00000000000..36c93b5cc23
--- /dev/null
+++ b/arch/xtensa/include/asm/local64.h
@@ -0,0 +1 @@
+#include <asm-generic/local64.h>
diff --git a/arch/xtensa/include/asm/pgalloc.h b/arch/xtensa/include/asm/pgalloc.h
index 4f4a7987ede..40cf9bceda2 100644
--- a/arch/xtensa/include/asm/pgalloc.h
+++ b/arch/xtensa/include/asm/pgalloc.h
@@ -14,6 +14,7 @@
 #ifdef __KERNEL__
 
 #include <linux/highmem.h>
+#include <linux/slab.h>
 
 /*
  * Allocating and freeing a pmd is trivial: the 1-entry pmd is
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 0ea4937c0b6..3acb26e8dea 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -12,7 +12,6 @@
 #define _XTENSA_PROCESSOR_H
 
 #include <variant/core.h>
-#include <asm/coprocessor.h>
 #include <platform/hardware.h>
 
 #include <linux/compiler.h>
diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h
index 3c549f79872..0d42c934b66 100644
--- a/arch/xtensa/include/asm/ptrace.h
+++ b/arch/xtensa/include/asm/ptrace.h
@@ -77,6 +77,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/coprocessor.h>
+
 /*
  * This struct defines the way the registers are stored on the
  * kernel stack during a system call or other kernel entry.
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 6f56d95f2c1..2d2728b3e86 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -23,8 +23,8 @@ obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 #
 # Replicate rules in scripts/Makefile.build
 
-sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g'	\
-	-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g'    \
+	-e 's/\*(\(\.text\.[a-z]*\))/*(\1.literal \1)/g'
 
 quiet_cmd__cpp_lds_S = LDS     $@
       cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index 070ff8af3a2..7dc3f915718 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -13,6 +13,7 @@
  */
 
 #include <asm/processor.h>
+#include <asm/coprocessor.h>
 
 #include <linux/types.h>
 #include <linux/stddef.h>
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 77fc9f6dc01..5fd01f6aaf3 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -16,6 +16,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor.h>
+#include <asm/coprocessor.h>
 #include <asm/thread_info.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index d215adcfd4e..3ef91a73652 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -184,8 +184,8 @@ _startup:
 	 * Now clear the BSS segment.
 	 */
 
-	movi	a2, _bss_start	# start of BSS
-	movi	a3, _bss_end	# end of BSS
+	movi	a2, __bss_start	# start of BSS
+	movi	a3, __bss_stop	# end of BSS
 
 	__loopt	a2, a3, a4, 2
 	s32i	a0, a2, 0
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 87e218f98ef..f717e20d961 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -623,6 +623,19 @@ static struct platform_driver iss_net_driver = {
 
 static int driver_registered;
 
+static const struct net_device_ops iss_netdev_ops = {
+	.ndo_open		= iss_net_open,
+	.ndo_stop		= iss_net_close,
+	.ndo_get_stats		= iss_net_get_stats,
+	.ndo_start_xmit		= iss_net_start_xmit,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= iss_net_change_mtu,
+	.ndo_set_mac_address	= iss_net_set_mac,
+	//.ndo_do_ioctl		= iss_net_ioctl,
+	.ndo_tx_timeout		= iss_net_tx_timeout,
+	.ndo_set_multicast_list = iss_net_set_multicast_list,
+};
+
 static int iss_net_configure(int index, char *init)
 {
 	struct net_device *dev;
@@ -686,15 +699,8 @@ static int iss_net_configure(int index, char *init)
 	 */
 	snprintf(dev->name, sizeof dev->name, "eth%d", index);
 
+	dev->netdev_ops = &iss_netdev_ops;
 	dev->mtu = lp->mtu;
-	dev->open = iss_net_open;
-	dev->hard_start_xmit = iss_net_start_xmit;
-	dev->stop = iss_net_close;
-	dev->get_stats = iss_net_get_stats;
-	dev->set_multicast_list = iss_net_set_multicast_list;
-	dev->tx_timeout = iss_net_tx_timeout;
-	dev->set_mac_address = iss_net_set_mac;
-	dev->change_mtu = iss_net_change_mtu;
 	dev->watchdog_timeo = (HZ >> 1);
 	dev->irq = -1;
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 91874e04855..ae473445ad6 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -101,7 +101,9 @@ obj-y				+= firmware/
 obj-$(CONFIG_CRYPTO)		+= crypto/
 obj-$(CONFIG_SUPERH)		+= sh/
 obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/
-obj-$(CONFIG_GENERIC_TIME)	+= clocksource/
+ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
+obj-y				+= clocksource/
+endif
 obj-$(CONFIG_DMA_ENGINE)	+= dma/
 obj-$(CONFIG_DCA)		+= dca/
 obj-$(CONFIG_HID)		+= hid/
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index 446aced33af..b76848c80be 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -77,7 +77,7 @@ static void power_saving_mwait_init(void)
 	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
 		(highest_subcstate - 1);
 
-#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
+#if defined(CONFIG_X86)
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 	case X86_VENDOR_INTEL:
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index c3f43daa8be..e0e6affb0d8 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -78,7 +78,9 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node *node,
 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list);
 
 acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info);
+acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info);
+
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 899d68afc3c..18e796fe429 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -100,13 +100,6 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_all_methods_serialized, FALSE);
 u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
 
 /*
- * Disable wakeup GPEs during runtime? Default is TRUE because WAKE and
- * RUNTIME GPEs should never be shared, and WAKE GPEs should typically only
- * be enabled just before going to sleep.
- */
-u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
-
-/*
  * Optionally use default values for the ACPI register widths. Set this to
  * TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
  */
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 32391588e16..120b3af5659 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -90,16 +90,13 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width);
 /*
  * hwgpe - GPE support
  */
-u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
 			     struct acpi_gpe_register_info *gpe_register_info);
 
 acpi_status
 acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
 
 acpi_status
-acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info);
-
-acpi_status
 acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 			  struct acpi_gpe_block_info *gpe_block, void *context);
 
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 147a7e6bd38..1ee0bcf399a 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -184,8 +184,9 @@ struct acpi_namespace_node {
 	u8 flags;		/* Miscellaneous flags */
 	acpi_owner_id owner_id;	/* Node creator */
 	union acpi_name_union name;	/* ACPI Name, always 4 chars per ACPI spec */
+	struct acpi_namespace_node *parent;	/* Parent node */
 	struct acpi_namespace_node *child;	/* First child */
-	struct acpi_namespace_node *peer;	/* Peer. Parent if ANOBJ_END_OF_PEER_LIST set */
+	struct acpi_namespace_node *peer;	/* First peer */
 
 	/*
 	 * The following fields are used by the ASL compiler and disassembler only
@@ -199,7 +200,7 @@ struct acpi_namespace_node {
 
 /* Namespace Node flags */
 
-#define ANOBJ_END_OF_PEER_LIST          0x01	/* End-of-list, Peer field points to parent */
+#define ANOBJ_RESERVED                  0x01	/* Available for use */
 #define ANOBJ_TEMPORARY                 0x02	/* Node is create by a method and is temporary */
 #define ANOBJ_METHOD_ARG                0x04	/* Node is a method argument */
 #define ANOBJ_METHOD_LOCAL              0x08	/* Node is a method local */
@@ -428,7 +429,6 @@ struct acpi_gpe_event_info {
 	u8 flags;		/* Misc info about this GPE */
 	u8 gpe_number;		/* This GPE */
 	u8 runtime_count;	/* References to a run GPE */
-	u8 wakeup_count;	/* References to a wake GPE */
 };
 
 /* Information about a GPE register pair, one per each status/enable pair in an array */
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 258159cfcdf..9f60ff00220 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -369,11 +369,4 @@ struct acpi_namespace_node *acpi_ns_validate_handle(acpi_handle handle);
 
 void acpi_ns_terminate(void);
 
-struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node
-						    *node);
-
-struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct
-							acpi_namespace_node
-							*node);
-
 #endif				/* __ACNAMESP_H__ */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index cde18ea8265..54857fa87aa 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -91,14 +91,14 @@
 
 /* Values for Flag byte above */
 
-#define AOPOBJ_AML_CONSTANT         0x01
-#define AOPOBJ_STATIC_POINTER       0x02
-#define AOPOBJ_DATA_VALID           0x04
-#define AOPOBJ_OBJECT_INITIALIZED   0x08
-#define AOPOBJ_SETUP_COMPLETE       0x10
-#define AOPOBJ_SINGLE_DATUM         0x20
-#define AOPOBJ_INVALID              0x40	/* Used if host OS won't allow an op_region address */
-#define AOPOBJ_MODULE_LEVEL         0x80
+#define AOPOBJ_AML_CONSTANT         0x01	/* Integer is an AML constant */
+#define AOPOBJ_STATIC_POINTER       0x02	/* Data is part of an ACPI table, don't delete */
+#define AOPOBJ_DATA_VALID           0x04	/* Object is intialized and data is valid */
+#define AOPOBJ_OBJECT_INITIALIZED   0x08	/* Region is initialized, _REG was run */
+#define AOPOBJ_SETUP_COMPLETE       0x10	/* Region setup is complete */
+#define AOPOBJ_INVALID              0x20	/* Host OS won't allow a Region address */
+#define AOPOBJ_MODULE_LEVEL         0x40	/* Method is actually module-level code */
+#define AOPOBJ_MODIFIED_NAMESPACE   0x80	/* Method modified the namespace */
 
 /******************************************************************************
  *
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index 97116082cb6..10998d369ad 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -503,15 +503,16 @@ static const union acpi_predefined_info predefined_names[] =
 	{{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
 			  {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
 
-	{{{0,0,0,0}, 0,0}} /* Table terminator */
-};
+	/* _WDG/_WED are MS extensions defined by "Windows Instrumentation" */
 
-#if 0
-	/* Not implemented */
+	{{"_WDG", 0, ACPI_RTYPE_BUFFER}},
+	{{"_WED", 1,
+	  ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER}},
 
-	{{"_WDG", 0, ACPI_RTYPE_BUFFER}},  /* MS Extension */
-	{{"_WED", 1, ACPI_RTYPE_PACKAGE}}, /* MS Extension */
+	{{{0, 0, 0, 0}, 0, 0}}  /* Table terminator */
+};
 
+#if 0
 	/* This is an internally implemented control method, no need to check */
 	{{"_OSI", 1, ACPI_RTYPE_INTEGER}},
 
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index 161bc0e3d70..6e5dd97949f 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -127,22 +127,22 @@ struct acpi_walk_state {
 	acpi_parse_upwards ascending_callback;
 };
 
-/* Info used by acpi_ps_init_objects */
+/* Info used by acpi_ns_initialize_objects and acpi_ds_initialize_objects */
 
 struct acpi_init_walk_info {
-	u16 method_count;
-	u16 device_count;
-	u16 op_region_count;
-	u16 field_count;
-	u16 buffer_count;
-	u16 package_count;
-	u16 op_region_init;
-	u16 field_init;
-	u16 buffer_init;
-	u16 package_init;
-	u16 object_count;
-	acpi_owner_id owner_id;
 	u32 table_index;
+	u32 object_count;
+	u32 method_count;
+	u32 device_count;
+	u32 op_region_count;
+	u32 field_count;
+	u32 buffer_count;
+	u32 package_count;
+	u32 op_region_init;
+	u32 field_init;
+	u32 buffer_init;
+	u32 package_init;
+	acpi_owner_id owner_id;
 };
 
 struct acpi_get_devices_info {
@@ -201,11 +201,11 @@ struct acpi_evaluate_info {
 /* Info used by acpi_ns_initialize_devices */
 
 struct acpi_device_walk_info {
-	u16 device_count;
-	u16 num_STA;
-	u16 num_INI;
 	struct acpi_table_desc *table_desc;
 	struct acpi_evaluate_info *evaluate_info;
+	u32 device_count;
+	u32 num_STA;
+	u32 num_INI;
 };
 
 /* TBD: [Restructure] Merge with struct above */
diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
index abe140318a7..cc4a38c5755 100644
--- a/drivers/acpi/acpica/dsinit.c
+++ b/drivers/acpi/acpica/dsinit.c
@@ -171,12 +171,12 @@ acpi_ds_initialize_objects(u32 table_index,
 			  "**** Starting initialization of namespace objects ****\n"));
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "Parsing all Control Methods:"));
 
-	info.method_count = 0;
-	info.op_region_count = 0;
-	info.object_count = 0;
-	info.device_count = 0;
-	info.table_index = table_index;
+	/* Set all init info to zero */
+
+	ACPI_MEMSET(&info, 0, sizeof(struct acpi_init_walk_info));
+
 	info.owner_id = owner_id;
+	info.table_index = table_index;
 
 	/* Walk entire namespace from the supplied root */
 
@@ -204,13 +204,13 @@ acpi_ds_initialize_objects(u32 table_index,
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
-			      "\nTable [%4.4s](id %4.4X) - %hd Objects with %hd Devices %hd Methods %hd Regions\n",
+			      "\nTable [%4.4s](id %4.4X) - %u Objects with %u Devices %u Methods %u Regions\n",
 			      table->signature, owner_id, info.object_count,
 			      info.device_count, info.method_count,
 			      info.op_region_count));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "%hd Methods, %hd Regions\n", info.method_count,
+			  "%u Methods, %u Regions\n", info.method_count,
 			  info.op_region_count));
 
 	return_ACPI_STATUS(AE_OK);
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index 2a9a561c2f0..64750ee96e2 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -584,8 +584,22 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc,
 		 * want make the objects permanent.
 		 */
 		if (!(method_desc->method.flags & AOPOBJ_MODULE_LEVEL)) {
-			acpi_ns_delete_namespace_by_owner(method_desc->method.
-							  owner_id);
+
+			/* Delete any direct children of (created by) this method */
+
+			acpi_ns_delete_namespace_subtree(walk_state->
+							 method_node);
+
+			/*
+			 * Delete any objects that were created by this method
+			 * elsewhere in the namespace (if any were created).
+			 */
+			if (method_desc->method.
+			    flags & AOPOBJ_MODIFIED_NAMESPACE) {
+				acpi_ns_delete_namespace_by_owner(method_desc->
+								  method.
+								  owner_id);
+			}
 		}
 	}
 
@@ -605,7 +619,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc,
 		 * we immediately reuse it for the next thread executing this method
 		 */
 		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "*** Completed execution of one thread, %d threads remaining\n",
+				  "*** Completed execution of one thread, %u threads remaining\n",
 				  method_desc->method.thread_count));
 	} else {
 		/* This is the only executing thread for this method */
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index f3d52f59250..8095306fcd8 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -102,8 +102,7 @@ void acpi_ds_method_data_init(struct acpi_walk_state *walk_state)
 		walk_state->arguments[i].name.integer |= (i << 24);
 		walk_state->arguments[i].descriptor_type = ACPI_DESC_TYPE_NAMED;
 		walk_state->arguments[i].type = ACPI_TYPE_ANY;
-		walk_state->arguments[i].flags =
-		    ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_ARG;
+		walk_state->arguments[i].flags = ANOBJ_METHOD_ARG;
 	}
 
 	/* Init the method locals */
@@ -116,8 +115,7 @@ void acpi_ds_method_data_init(struct acpi_walk_state *walk_state)
 		walk_state->local_variables[i].descriptor_type =
 		    ACPI_DESC_TYPE_NAMED;
 		walk_state->local_variables[i].type = ACPI_TYPE_ANY;
-		walk_state->local_variables[i].flags =
-		    ANOBJ_END_OF_PEER_LIST | ANOBJ_METHOD_LOCAL;
+		walk_state->local_variables[i].flags = ANOBJ_METHOD_LOCAL;
 	}
 
 	return_VOID;
@@ -146,7 +144,7 @@ void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state)
 
 	for (index = 0; index < ACPI_METHOD_NUM_LOCALS; index++) {
 		if (walk_state->local_variables[index].object) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Local%d=%p\n",
+			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Local%u=%p\n",
 					  index,
 					  walk_state->local_variables[index].
 					  object));
@@ -162,7 +160,7 @@ void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state)
 
 	for (index = 0; index < ACPI_METHOD_NUM_ARGS; index++) {
 		if (walk_state->arguments[index].object) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Arg%d=%p\n",
+			ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Deleting Arg%u=%p\n",
 					  index,
 					  walk_state->arguments[index].object));
 
@@ -226,7 +224,7 @@ acpi_ds_method_data_init_args(union acpi_operand_object **params,
 		index++;
 	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%d args passed to method\n", index));
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%u args passed to method\n", index));
 	return_ACPI_STATUS(AE_OK);
 }
 
@@ -323,7 +321,7 @@ acpi_ds_method_data_set_value(u8 type,
 	ACPI_FUNCTION_TRACE(ds_method_data_set_value);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-			  "NewObj %p Type %2.2X, Refs=%d [%s]\n", object,
+			  "NewObj %p Type %2.2X, Refs=%u [%s]\n", object,
 			  type, object->common.reference_count,
 			  acpi_ut_get_type_name(object->common.type)));
 
@@ -543,7 +541,7 @@ acpi_ds_store_object_to_local(u8 type,
 	union acpi_operand_object *new_obj_desc;
 
 	ACPI_FUNCTION_TRACE(ds_store_object_to_local);
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Type=%2.2X Index=%d Obj=%p\n",
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Type=%2.2X Index=%u Obj=%p\n",
 			  type, index, obj_desc));
 
 	/* Parameter validation */
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 3607adcaf08..8e85f54a8e0 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -81,6 +81,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 {
 	union acpi_operand_object *obj_desc;
 	acpi_status status;
+	acpi_object_type type;
 
 	ACPI_FUNCTION_TRACE(ds_build_internal_object);
 
@@ -172,7 +173,20 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
 				return_ACPI_STATUS(status);
 			}
 
-			switch (op->common.node->type) {
+			/*
+			 * Special handling for Alias objects. We need to setup the type
+			 * and the Op->Common.Node to point to the Alias target. Note,
+			 * Alias has at most one level of indirection internally.
+			 */
+			type = op->common.node->type;
+			if (type == ACPI_TYPE_LOCAL_ALIAS) {
+				type = obj_desc->common.type;
+				op->common.node =
+				    ACPI_CAST_PTR(struct acpi_namespace_node,
+						  op->common.node->object);
+			}
+
+			switch (type) {
 				/*
 				 * For these types, we need the actual node, not the subobject.
 				 * However, the subobject did not get an extra reference count above.
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index 53a7e416f33..7c0e7422717 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -213,7 +213,7 @@ acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
 
 	/* Execute the AML code for the term_arg arguments */
 
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+	status = acpi_ds_execute_arguments(node, node->parent,
 					   extra_desc->extra.aml_length,
 					   extra_desc->extra.aml_start);
 	return_ACPI_STATUS(status);
@@ -257,7 +257,7 @@ acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
 
 	/* Execute the AML code for the term_arg arguments */
 
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+	status = acpi_ds_execute_arguments(node, node->parent,
 					   extra_desc->extra.aml_length,
 					   extra_desc->extra.aml_start);
 	return_ACPI_STATUS(status);
@@ -394,7 +394,7 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
 
 	/* Execute the argument AML */
 
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+	status = acpi_ds_execute_arguments(node, node->parent,
 					   extra_desc->extra.aml_length,
 					   extra_desc->extra.aml_start);
 	if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index 306c62ab2e8..15135c25aa9 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -746,7 +746,7 @@ acpi_ds_create_operands(struct acpi_walk_state *walk_state,
 		index--;
 
 		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "Arg #%d (%p) done, Arg1=%p\n", index, arg,
+				  "Arg #%u (%p) done, Arg1=%p\n", index, arg,
 				  first_arg));
 	}
 
@@ -760,7 +760,7 @@ acpi_ds_create_operands(struct acpi_walk_state *walk_state,
 	 */
 	acpi_ds_obj_stack_pop_and_delete(arg_count, walk_state);
 
-	ACPI_EXCEPTION((AE_INFO, status, "While creating Arg %d", index));
+	ACPI_EXCEPTION((AE_INFO, status, "While creating Arg %u", index));
 	return_ACPI_STATUS(status);
 }
 
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index f5795915a2e..303618889da 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -102,9 +102,8 @@ acpi_status acpi_ev_initialize_events(void)
  * RETURN:      Status
  *
  * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks
- *              (0 and 1). This causes the _PRW methods to be run, so the HW
- *              must be fully initialized at this point, including global lock
- *              support.
+ *              (0 and 1). The HW must be fully initialized at this point,
+ *              including global lock support.
  *
  ******************************************************************************/
 
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 7c2c336006a..7a6a3e6f4be 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -54,49 +54,84 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ev_update_gpe_enable_masks
+ * FUNCTION:    acpi_ev_update_gpe_enable_mask
  *
  * PARAMETERS:  gpe_event_info          - GPE to update
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Updates GPE register enable masks based upon whether there are
- *              references (either wake or run) to this GPE
+ * DESCRIPTION: Updates GPE register enable mask based upon whether there are
+ *              runtime references to this GPE
  *
  ******************************************************************************/
 
 acpi_status
-acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info)
+acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
 {
 	struct acpi_gpe_register_info *gpe_register_info;
 	u32 register_bit;
 
-	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks);
+	ACPI_FUNCTION_TRACE(ev_update_gpe_enable_mask);
 
 	gpe_register_info = gpe_event_info->register_info;
 	if (!gpe_register_info) {
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
 
-	/* Clear the wake/run bits up front */
+	/* Clear the run bit up front */
 
-	ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit);
 	ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
 
-	/* Set the mask bits only if there are references to this GPE */
+	/* Set the mask bit only if there are references to this GPE */
 
 	if (gpe_event_info->runtime_count) {
-		ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit);
+		ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
 	}
 
-	if (gpe_event_info->wakeup_count) {
-		ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit);
+	return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ev_enable_gpe
+ *
+ * PARAMETERS:  gpe_event_info  - GPE to enable
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ev_enable_gpe);
+
+	/*
+	 * We will only allow a GPE to be enabled if it has either an
+	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
+	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
+	 * first time it fires.
+	 */
+	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+		return_ACPI_STATUS(AE_NO_HANDLER);
 	}
 
-	return_ACPI_STATUS(AE_OK);
+	/* Clear the GPE (of stale events) */
+	status = acpi_hw_clear_gpe(gpe_event_info);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Enable the requested GPE */
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+
+	return_ACPI_STATUS(status);
 }
 
 
@@ -417,8 +452,12 @@ static void acpi_ev_asynch_enable_gpe(void *context)
 		}
 	}
 
-	/* Enable this GPE */
-	(void)acpi_hw_write_gpe_enable_reg(gpe_event_info);
+	/*
+	 * Enable this GPE, conditionally. This means that the GPE will only be
+	 * physically enabled if the enable_for_run bit is set in the event_info
+	 */
+	(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
+
 	return_VOID;
 }
 
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 341a38ce8aa..85445fb5844 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -439,8 +439,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 {
 	acpi_status status;
 	struct acpi_gpe_event_info *gpe_event_info;
-	struct acpi_gpe_walk_info walk_info;
-	u32 wake_gpe_count;
 	u32 gpe_enabled_count;
 	u32 gpe_index;
 	u32 gpe_number;
@@ -456,37 +454,9 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 	}
 
 	/*
-	 * Runtime option: Should wake GPEs be enabled at runtime?  The default
-	 * is no, they should only be enabled just as the machine goes to sleep.
+	 * Enable all GPEs that have a corresponding method.  Any other GPEs
+	 * within this block must be enabled via the acpi_enable_gpe interface.
 	 */
-	if (acpi_gbl_leave_wake_gpes_disabled) {
-		/*
-		 * Differentiate runtime vs wake GPEs, via the _PRW control methods.
-		 * Each GPE that has one or more _PRWs that reference it is by
-		 * definition a wake GPE and will not be enabled while the machine
-		 * is running.
-		 */
-		walk_info.gpe_block = gpe_block;
-		walk_info.gpe_device = gpe_device;
-		walk_info.execute_by_owner_id = FALSE;
-
-		status =
-		    acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-					   ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
-					   acpi_ev_match_prw_and_gpe, NULL,
-					   &walk_info, NULL);
-		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status,
-					"While executing _PRW methods"));
-		}
-	}
-
-	/*
-	 * Enable all GPEs that have a corresponding method and are not
-	 * capable of generating wakeups. Any other GPEs within this block
-	 * must be enabled via the acpi_enable_gpe interface.
-	 */
-	wake_gpe_count = 0;
 	gpe_enabled_count = 0;
 
 	if (gpe_device == acpi_gbl_fadt_gpe_device) {
@@ -502,35 +472,21 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 			gpe_event_info = &gpe_block->event_info[gpe_index];
 			gpe_number = gpe_index + gpe_block->block_base_number;
 
-			/*
-			 * If the GPE has already been enabled for runtime
-			 * signaling, make sure it remains enabled, but do not
-			 * increment its reference counter.
-			 */
-			if (gpe_event_info->runtime_count) {
-				acpi_set_gpe(gpe_device, gpe_number,
-						ACPI_GPE_ENABLE);
-				gpe_enabled_count++;
-				continue;
-			}
-
-			if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
-				wake_gpe_count++;
-				if (acpi_gbl_leave_wake_gpes_disabled) {
-					continue;
-				}
-			}
-
 			/* Ignore GPEs that have no corresponding _Lxx/_Exx method */
 
 			if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) {
 				continue;
 			}
 
-			/* Enable this GPE */
+			/*
+			 * If the GPE has already been enabled for runtime
+			 * signaling, make sure it remains enabled, but do not
+			 * increment its reference counter.
+			 */
+			status = gpe_event_info->runtime_count ?
+				acpi_ev_enable_gpe(gpe_event_info) :
+				acpi_enable_gpe(gpe_device, gpe_number);
 
-			status = acpi_enable_gpe(gpe_device, gpe_number,
-						 ACPI_GPE_TYPE_RUNTIME);
 			if (ACPI_FAILURE(status)) {
 				ACPI_EXCEPTION((AE_INFO, status,
 						"Could not enable GPE 0x%02X",
@@ -542,10 +498,10 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
 		}
 	}
 
-	if (gpe_enabled_count || wake_gpe_count) {
+	if (gpe_enabled_count) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-				  "Enabled %u Runtime GPEs, added %u Wake GPEs in this block\n",
-				  gpe_enabled_count, wake_gpe_count));
+				  "Enabled %u GPEs in this block\n",
+				  gpe_enabled_count));
 	}
 
 	return_ACPI_STATUS(AE_OK);
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index 3f6c2d26410..3084c5de1bb 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -211,9 +211,7 @@ acpi_status acpi_ev_gpe_initialize(void)
  * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
  *              result of a Load() or load_table() operation. If new GPE
  *              methods have been installed, register the new methods and
- *              enable and runtime GPEs that are associated with them. Also,
- *              run any newly loaded _PRW methods in order to discover any
- *              new CAN_WAKE GPEs.
+ *              enable and runtime GPEs that are associated with them.
  *
  ******************************************************************************/
 
@@ -223,49 +221,12 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
 	struct acpi_gpe_block_info *gpe_block;
 	struct acpi_gpe_walk_info walk_info;
 	acpi_status status = AE_OK;
-	u32 new_wake_gpe_count = 0;
-
-	/* We will examine only _PRW/_Lxx/_Exx methods owned by this table */
-
-	walk_info.owner_id = table_owner_id;
-	walk_info.execute_by_owner_id = TRUE;
-	walk_info.count = 0;
-
-	if (acpi_gbl_leave_wake_gpes_disabled) {
-		/*
-		 * 1) Run any newly-loaded _PRW methods to find any GPEs that
-		 * can now be marked as CAN_WAKE GPEs. Note: We must run the
-		 * _PRW methods before we process the _Lxx/_Exx methods because
-		 * we will enable all runtime GPEs associated with the new
-		 * _Lxx/_Exx methods at the time we process those methods.
-		 *
-		 * Unlock interpreter so that we can run the _PRW methods.
-		 */
-		walk_info.gpe_block = NULL;
-		walk_info.gpe_device = NULL;
-
-		acpi_ex_exit_interpreter();
-
-		status =
-		    acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-					   ACPI_UINT32_MAX,
-					   ACPI_NS_WALK_NO_UNLOCK,
-					   acpi_ev_match_prw_and_gpe, NULL,
-					   &walk_info, NULL);
-		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status,
-					"While executing _PRW methods"));
-		}
-
-		acpi_ex_enter_interpreter();
-		new_wake_gpe_count = walk_info.count;
-	}
 
 	/*
 	 * 2) Find any _Lxx/_Exx GPE methods that have just been loaded.
 	 *
-	 * Any GPEs that correspond to new _Lxx/_Exx methods and are not
-	 * marked as CAN_WAKE are immediately enabled.
+	 * Any GPEs that correspond to new _Lxx/_Exx methods are immediately
+	 * enabled.
 	 *
 	 * Examine the namespace underneath each gpe_device within the
 	 * gpe_block lists.
@@ -275,6 +236,8 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
 		return;
 	}
 
+	walk_info.owner_id = table_owner_id;
+	walk_info.execute_by_owner_id = TRUE;
 	walk_info.count = 0;
 	walk_info.enable_this_gpe = TRUE;
 
@@ -307,10 +270,8 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
 		gpe_xrupt_info = gpe_xrupt_info->next;
 	}
 
-	if (walk_info.count || new_wake_gpe_count) {
-		ACPI_INFO((AE_INFO,
-			   "Enabled %u new runtime GPEs, added %u new wakeup GPEs",
-			   walk_info.count, new_wake_gpe_count));
+	if (walk_info.count) {
+		ACPI_INFO((AE_INFO, "Enabled %u new GPEs", walk_info.count));
 	}
 
 	(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
@@ -386,9 +347,6 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
 	/*
 	 * 3) Edge/Level determination is based on the 2nd character
 	 *    of the method name
-	 *
-	 * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is
-	 * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set.
 	 */
 	switch (name[1]) {
 	case 'L':
@@ -471,24 +429,18 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
 	 */
 	if (walk_info->enable_this_gpe) {
 
-		/* Ignore GPEs that can wake the system */
+		walk_info->count++;
+		gpe_device = walk_info->gpe_device;
 
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE) ||
-		    !acpi_gbl_leave_wake_gpes_disabled) {
-			walk_info->count++;
-			gpe_device = walk_info->gpe_device;
-
-			if (gpe_device == acpi_gbl_fadt_gpe_device) {
-				gpe_device = NULL;
-			}
+		if (gpe_device == acpi_gbl_fadt_gpe_device) {
+			gpe_device = NULL;
+		}
 
-			status = acpi_enable_gpe(gpe_device, gpe_number,
-						 ACPI_GPE_TYPE_RUNTIME);
-			if (ACPI_FAILURE(status)) {
-				ACPI_EXCEPTION((AE_INFO, status,
-						"Could not enable GPE 0x%02X",
-						gpe_number));
-			}
+		status = acpi_enable_gpe(gpe_device, gpe_number);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"Could not enable GPE 0x%02X",
+					gpe_number));
 		}
 	}
 
@@ -497,157 +449,3 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
 			  name, gpe_number));
 	return_ACPI_STATUS(AE_OK);
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ev_match_prw_and_gpe
- *
- * PARAMETERS:  Callback from walk_namespace
- *
- * RETURN:      Status. NOTE: We ignore errors so that the _PRW walk is
- *              not aborted on a single _PRW failure.
- *
- * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a
- *              Device. Run the _PRW method. If present, extract the GPE
- *              number and mark the GPE as a CAN_WAKE GPE. Allows a
- *              per-owner_id execution if execute_by_owner_id is TRUE in the
- *              walk_info parameter block.
- *
- * If walk_info->execute_by_owner_id is TRUE, we only execute _PRWs with that
- *    owner.
- * If walk_info->gpe_device is NULL, we execute every _PRW found. Otherwise,
- *    we only execute _PRWs that refer to the input gpe_device.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
-			  u32 level, void *context, void **return_value)
-{
-	struct acpi_gpe_walk_info *walk_info =
-	    ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
-	struct acpi_namespace_node *gpe_device;
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_namespace_node *target_gpe_device;
-	struct acpi_namespace_node *prw_node;
-	struct acpi_gpe_event_info *gpe_event_info;
-	union acpi_operand_object *pkg_desc;
-	union acpi_operand_object *obj_desc;
-	u32 gpe_number;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ev_match_prw_and_gpe);
-
-	/* Check for a _PRW method under this device */
-
-	status = acpi_ns_get_node(obj_handle, METHOD_NAME__PRW,
-				  ACPI_NS_NO_UPSEARCH, &prw_node);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Check if requested owner_id matches this owner_id */
-
-	if ((walk_info->execute_by_owner_id) &&
-	    (prw_node->owner_id != walk_info->owner_id)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Execute the _PRW */
-
-	status = acpi_ut_evaluate_object(prw_node, NULL,
-					 ACPI_BTYPE_PACKAGE, &pkg_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* The returned _PRW package must have at least two elements */
-
-	if (pkg_desc->package.count < 2) {
-		goto cleanup;
-	}
-
-	/* Extract pointers from the input context */
-
-	gpe_device = walk_info->gpe_device;
-	gpe_block = walk_info->gpe_block;
-
-	/*
-	 * The _PRW object must return a package, we are only interested
-	 * in the first element
-	 */
-	obj_desc = pkg_desc->package.elements[0];
-
-	if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
-
-		/* Use FADT-defined GPE device (from definition of _PRW) */
-
-		target_gpe_device = NULL;
-		if (gpe_device) {
-			target_gpe_device = acpi_gbl_fadt_gpe_device;
-		}
-
-		/* Integer is the GPE number in the FADT described GPE blocks */
-
-		gpe_number = (u32)obj_desc->integer.value;
-	} else if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
-
-		/* Package contains a GPE reference and GPE number within a GPE block */
-
-		if ((obj_desc->package.count < 2) ||
-		    ((obj_desc->package.elements[0])->common.type !=
-		     ACPI_TYPE_LOCAL_REFERENCE) ||
-		    ((obj_desc->package.elements[1])->common.type !=
-		     ACPI_TYPE_INTEGER)) {
-			goto cleanup;
-		}
-
-		/* Get GPE block reference and decode */
-
-		target_gpe_device =
-		    obj_desc->package.elements[0]->reference.node;
-		gpe_number = (u32)obj_desc->package.elements[1]->integer.value;
-	} else {
-		/* Unknown type, just ignore it */
-
-		goto cleanup;
-	}
-
-	/* Get the gpe_event_info for this GPE */
-
-	if (gpe_device) {
-		/*
-		 * Is this GPE within this block?
-		 *
-		 * TRUE if and only if these conditions are true:
-		 *     1) The GPE devices match.
-		 *     2) The GPE index(number) is within the range of the Gpe Block
-		 *          associated with the GPE device.
-		 */
-		if (gpe_device != target_gpe_device) {
-			goto cleanup;
-		}
-
-		gpe_event_info =
-		    acpi_ev_low_get_gpe_info(gpe_number, gpe_block);
-	} else {
-		/* gpe_device is NULL, just match the target_device and gpe_number */
-
-		gpe_event_info =
-		    acpi_ev_get_gpe_event_info(target_gpe_device, gpe_number);
-	}
-
-	if (gpe_event_info) {
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
-
-			/* This GPE can wake the system */
-
-			gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
-			walk_info->count++;
-		}
-	}
-
-      cleanup:
-	acpi_ut_remove_reference(pkg_desc);
-	return_ACPI_STATUS(AE_OK);
-}
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 2e3b0334072..f40d271bf56 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -199,7 +199,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 		return_ACPI_STATUS(status);
 	}
 
-	parent_node = acpi_ns_get_parent_node(region_obj->region.node);
+	parent_node = region_obj->region.node->parent;
 
 	/*
 	 * Get the _SEG and _BBN values from the device upon which the handler
@@ -248,7 +248,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 				break;
 			}
 
-			pci_root_node = acpi_ns_get_parent_node(pci_root_node);
+			pci_root_node = pci_root_node->parent;
 		}
 
 		/* PCI root bridge not found, use namespace root node */
@@ -280,7 +280,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 	 */
 	pci_device_node = region_obj->region.node;
 	while (pci_device_node && (pci_device_node->type != ACPI_TYPE_DEVICE)) {
-		pci_device_node = acpi_ns_get_parent_node(pci_device_node);
+		pci_device_node = pci_device_node->parent;
 	}
 
 	if (!pci_device_node) {
@@ -521,7 +521,7 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj,
 		return_ACPI_STATUS(AE_NOT_EXIST);
 	}
 
-	node = acpi_ns_get_parent_node(region_obj->region.node);
+	node = region_obj->region.node->parent;
 	space_id = region_obj->region.space_id;
 
 	/* Setup defaults */
@@ -654,7 +654,7 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj,
 
 		/* This node does not have the handler we need; Pop up one level */
 
-		node = acpi_ns_get_parent_node(node);
+		node = node->parent;
 	}
 
 	/* If we get here, there is no handler for this region */
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 18b3f1468b7..0ec900da579 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -213,101 +213,71 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event)
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_clear_and_enable_gpe
- *
- * PARAMETERS:  gpe_event_info  - GPE to enable
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Clear the given GPE from stale events and enable it.
- *
- ******************************************************************************/
-static acpi_status
-acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
-	acpi_status status;
-
-	/*
-	 * We will only allow a GPE to be enabled if it has either an
-	 * associated method (_Lxx/_Exx) or a handler. Otherwise, the
-	 * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
-	 * first time it fires.
-	 */
-	if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
-		return_ACPI_STATUS(AE_NO_HANDLER);
-	}
-
-	/* Clear the GPE (of stale events) */
-	status = acpi_hw_clear_gpe(gpe_event_info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Enable the requested GPE */
-	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_set_gpe
+ * FUNCTION:    acpi_gpe_wakeup
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              action          - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE
+ *              Action          - Enable or Disable
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable or disable an individual GPE. This function bypasses
- *              the reference count mechanism used in the acpi_enable_gpe and
- *              acpi_disable_gpe interfaces -- and should be used with care.
- *
- * Note: Typically used to disable a runtime GPE for short period of time,
- * then re-enable it, without disturbing the existing reference counts. This
- * is useful, for example, in the Embedded Controller (EC) driver.
+ * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit.
  *
  ******************************************************************************/
-acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action)
 {
+	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
-	acpi_status status;
+	struct acpi_gpe_register_info *gpe_register_info;
 	acpi_cpu_flags flags;
+	u32 register_bit;
 
-	ACPI_FUNCTION_TRACE(acpi_set_gpe);
+	ACPI_FUNCTION_TRACE(acpi_gpe_wakeup);
 
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
 
 	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
-	if (!gpe_event_info) {
+	if (!gpe_event_info || !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
 		status = AE_BAD_PARAMETER;
 		goto unlock_and_exit;
 	}
 
+	gpe_register_info = gpe_event_info->register_info;
+	if (!gpe_register_info) {
+		status = AE_NOT_EXIST;
+		goto unlock_and_exit;
+	}
+
+	register_bit =
+	    acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
+
 	/* Perform the action */
 
 	switch (action) {
 	case ACPI_GPE_ENABLE:
-		status = acpi_clear_and_enable_gpe(gpe_event_info);
+		ACPI_SET_BIT(gpe_register_info->enable_for_wake,
+			     (u8)register_bit);
 		break;
 
 	case ACPI_GPE_DISABLE:
-		status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+		ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
+			       (u8)register_bit);
 		break;
 
 	default:
+		ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
 		status = AE_BAD_PARAMETER;
 		break;
 	}
 
-      unlock_and_exit:
+unlock_and_exit:
 	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 	return_ACPI_STATUS(status);
 }
 
-ACPI_EXPORT_SYMBOL(acpi_set_gpe)
+ACPI_EXPORT_SYMBOL(acpi_gpe_wakeup)
 
 /*******************************************************************************
  *
@@ -315,17 +285,14 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe)
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              gpe_type        - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE
- *                                or both
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
- *              hardware-enabled (for runtime GPEs), or the GPE register mask
- *              is updated (for wake GPEs).
+ *              hardware-enabled.
  *
  ******************************************************************************/
-acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -333,12 +300,6 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 
 	ACPI_FUNCTION_TRACE(acpi_enable_gpe);
 
-	/* Parameter validation */
-
-	if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
@@ -349,46 +310,19 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
 		goto unlock_and_exit;
 	}
 
-	if (gpe_type & ACPI_GPE_TYPE_RUNTIME) {
-		if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
-			status = AE_LIMIT;	/* Too many references */
-			goto unlock_and_exit;
-		}
-
-		gpe_event_info->runtime_count++;
-		if (gpe_event_info->runtime_count == 1) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-			if (ACPI_SUCCESS(status)) {
-				status = acpi_clear_and_enable_gpe(gpe_event_info);
-			}
-
-			if (ACPI_FAILURE(status)) {
-				gpe_event_info->runtime_count--;
-				goto unlock_and_exit;
-			}
-		}
+	if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
+		status = AE_LIMIT;	/* Too many references */
+		goto unlock_and_exit;
 	}
 
-	if (gpe_type & ACPI_GPE_TYPE_WAKE) {
-		/* The GPE must have the ability to wake the system */
-
-		if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
-			status = AE_TYPE;
-			goto unlock_and_exit;
+	gpe_event_info->runtime_count++;
+	if (gpe_event_info->runtime_count == 1) {
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status = acpi_ev_enable_gpe(gpe_event_info);
 		}
-
-		if (gpe_event_info->wakeup_count == ACPI_UINT8_MAX) {
-			status = AE_LIMIT;	/* Too many references */
-			goto unlock_and_exit;
-		}
-
-		/*
-		 * Update the enable mask on the first wakeup reference. Wake GPEs
-		 * are only hardware-enabled just before sleeping.
-		 */
-		gpe_event_info->wakeup_count++;
-		if (gpe_event_info->wakeup_count == 1) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count--;
 		}
 	}
 
@@ -404,8 +338,6 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
  *
  * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
  *              gpe_number      - GPE level within the GPE block
- *              gpe_type        - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE
- *                                or both
  *
  * RETURN:      Status
  *
@@ -414,7 +346,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
  *              the GPE mask bit disabled (for wake GPEs)
  *
  ******************************************************************************/
-acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type)
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -422,12 +354,6 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 	ACPI_FUNCTION_TRACE(acpi_disable_gpe);
 
-	/* Parameter validation */
-
-	if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
 	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 
 	/* Ensure that we have a valid GPE number */
@@ -440,41 +366,21 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type
 
 	/* Hardware-disable a runtime GPE on removal of the last reference */
 
-	if (gpe_type & ACPI_GPE_TYPE_RUNTIME) {
-		if (!gpe_event_info->runtime_count) {
-			status = AE_LIMIT;	/* There are no references to remove */
-			goto unlock_and_exit;
-		}
-
-		gpe_event_info->runtime_count--;
-		if (!gpe_event_info->runtime_count) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
-			if (ACPI_SUCCESS(status)) {
-				status = acpi_hw_low_set_gpe(gpe_event_info,
-							     ACPI_GPE_DISABLE);
-			}
-
-			if (ACPI_FAILURE(status)) {
-				gpe_event_info->runtime_count++;
-				goto unlock_and_exit;
-			}
-		}
+	if (!gpe_event_info->runtime_count) {
+		status = AE_LIMIT;	/* There are no references to remove */
+		goto unlock_and_exit;
 	}
 
-	/*
-	 * Update masks for wake GPE on removal of the last reference.
-	 * No need to hardware-disable wake GPEs here, they are not currently
-	 * enabled.
-	 */
-	if (gpe_type & ACPI_GPE_TYPE_WAKE) {
-		if (!gpe_event_info->wakeup_count) {
-			status = AE_LIMIT;	/* There are no references to remove */
-			goto unlock_and_exit;
+	gpe_event_info->runtime_count--;
+	if (!gpe_event_info->runtime_count) {
+		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
+		if (ACPI_SUCCESS(status)) {
+			status =
+			    acpi_hw_low_set_gpe(gpe_event_info,
+						ACPI_GPE_DISABLE);
 		}
-
-		gpe_event_info->wakeup_count--;
-		if (!gpe_event_info->wakeup_count) {
-			status = acpi_ev_update_gpe_enable_masks(gpe_event_info);
+		if (ACPI_FAILURE(status)) {
+			gpe_event_info->runtime_count++;
 		}
 	}
 
@@ -486,6 +392,59 @@ ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
 
 /*******************************************************************************
  *
+ * FUNCTION:    acpi_gpe_can_wake
+ *
+ * PARAMETERS:  gpe_device      - Parent GPE Device. NULL for GPE0/GPE1
+ *              gpe_number      - GPE level within the GPE block
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE.  If the GPE
+ *              has a corresponding method and is currently enabled, disable it
+ *              (GPEs with corresponding methods are enabled unconditionally
+ *              during initialization, but GPEs that can wake up are expected
+ *              to be initially disabled).
+ *
+ ******************************************************************************/
+acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number)
+{
+	acpi_status status = AE_OK;
+	struct acpi_gpe_event_info *gpe_event_info;
+	acpi_cpu_flags flags;
+	u8 disable = 0;
+
+	ACPI_FUNCTION_TRACE(acpi_gpe_can_wake);
+
+	flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
+
+	/* Ensure that we have a valid GPE number */
+
+	gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
+	if (!gpe_event_info) {
+		status = AE_BAD_PARAMETER;
+		goto unlock_and_exit;
+	}
+
+	if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
+		goto unlock_and_exit;
+	}
+
+	gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
+	disable = (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
+		&& gpe_event_info->runtime_count;
+
+unlock_and_exit:
+	acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+	if (disable)
+		status = acpi_disable_gpe(gpe_device, gpe_number);
+
+	return_ACPI_STATUS(status);
+}
+ACPI_EXPORT_SYMBOL(acpi_gpe_can_wake)
+
+/*******************************************************************************
+ *
  * FUNCTION:    acpi_disable_event
  *
  * PARAMETERS:  Event           - The fixed eventto be enabled
@@ -800,7 +759,7 @@ acpi_install_gpe_block(acpi_handle gpe_device,
 
 	obj_desc->device.gpe_block = gpe_block;
 
-	/* Run the _PRW methods and enable the runtime GPEs in the new block */
+	/* Enable the runtime GPEs in the new block */
 
 	status = acpi_ev_initialize_gpe_block(node, gpe_block);
 
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 008621c5ad8..18832205b63 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -120,7 +120,7 @@ acpi_ex_add_table(u32 table_index,
 	acpi_ns_exec_module_code_list();
 	acpi_ex_enter_interpreter();
 
-	/* Update GPEs for any new _PRW or _Lxx/_Exx methods. Ignore errors */
+	/* Update GPEs for any new _Lxx/_Exx methods. Ignore errors */
 
 	status = acpi_tb_get_owner_id(table_index, &owner_id);
 	if (ACPI_SUCCESS(status)) {
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index d39d438ba1e..f067bbb0d96 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -742,7 +742,7 @@ acpi_ex_dump_operands(union acpi_operand_object **operands,
 	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-			  "**** Start operand dump for opcode [%s], %d operands\n",
+			  "**** Start operand dump for opcode [%s], %u operands\n",
 			  opcode_name, num_operands));
 
 	if (num_operands == 0) {
@@ -812,7 +812,7 @@ void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags)
 	acpi_ex_out_string("Type", acpi_ut_get_type_name(node->type));
 	acpi_ex_out_pointer("Attached Object",
 			    acpi_ns_get_attached_object(node));
-	acpi_ex_out_pointer("Parent", acpi_ns_get_parent_node(node));
+	acpi_ex_out_pointer("Parent", node->parent);
 
 	acpi_ex_dump_object(ACPI_CAST_PTR(union acpi_operand_object, node),
 			    acpi_ex_dump_node);
@@ -945,7 +945,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
 
 	case ACPI_TYPE_PACKAGE:
 
-		acpi_os_printf("[Package] Contains %d Elements:\n",
+		acpi_os_printf("[Package] Contains %u Elements:\n",
 			       obj_desc->package.count);
 
 		for (i = 0; i < obj_desc->package.count; i++) {
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index a6dc26f0b3b..047217303a4 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -534,13 +534,13 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
 	if (ACPI_SUCCESS(status)) {
 		if (read_write == ACPI_READ) {
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "Value Read %8.8X%8.8X, Width %d\n",
+					  "Value Read %8.8X%8.8X, Width %u\n",
 					  ACPI_FORMAT_UINT64(*value),
 					  obj_desc->common_field.
 					  access_byte_width));
 		} else {
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "Value Written %8.8X%8.8X, Width %d\n",
+					  "Value Written %8.8X%8.8X, Width %u\n",
 					  ACPI_FORMAT_UINT64(*value),
 					  obj_desc->common_field.
 					  access_byte_width));
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 25059dace0a..98a331d2249 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -108,11 +108,11 @@ acpi_ex_generate_access(u32 field_bit_offset,
 	field_byte_length = field_byte_end_offset - field_byte_offset;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-			  "Bit length %d, Bit offset %d\n",
+			  "Bit length %u, Bit offset %u\n",
 			  field_bit_length, field_bit_offset));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-			  "Byte Length %d, Byte Offset %d, End Offset %d\n",
+			  "Byte Length %u, Byte Offset %u, End Offset %u\n",
 			  field_byte_length, field_byte_offset,
 			  field_byte_end_offset));
 
@@ -147,11 +147,11 @@ acpi_ex_generate_access(u32 field_bit_offset,
 			accesses = field_end_offset - field_start_offset;
 
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "AccessWidth %d end is within region\n",
+					  "AccessWidth %u end is within region\n",
 					  access_byte_width));
 
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "Field Start %d, Field End %d -- requires %d accesses\n",
+					  "Field Start %u, Field End %u -- requires %u accesses\n",
 					  field_start_offset, field_end_offset,
 					  accesses));
 
@@ -159,7 +159,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 
 			if (accesses <= 1) {
 				ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-						  "Entire field can be accessed with one operation of size %d\n",
+						  "Entire field can be accessed with one operation of size %u\n",
 						  access_byte_width));
 				return_VALUE(access_byte_width);
 			}
@@ -174,7 +174,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 			}
 		} else {
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "AccessWidth %d end is NOT within region\n",
+					  "AccessWidth %u end is NOT within region\n",
 					  access_byte_width));
 			if (access_byte_width == 1) {
 				ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
@@ -190,7 +190,7 @@ acpi_ex_generate_access(u32 field_bit_offset,
 			 * previous access
 			 */
 			ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
-					  "Backing off to previous optimal access width of %d\n",
+					  "Backing off to previous optimal access width of %u\n",
 					  minimum_access_width));
 			return_VALUE(minimum_access_width);
 		}
@@ -385,15 +385,6 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
 	    (field_bit_position -
 	     ACPI_MUL_8(obj_desc->common_field.base_byte_offset));
 
-	/*
-	 * Does the entire field fit within a single field access element? (datum)
-	 * (i.e., without crossing a datum boundary)
-	 */
-	if ((obj_desc->common_field.start_field_bit_offset +
-	     field_bit_length) <= (u16) access_bit_width) {
-		obj_desc->common.flags |= AOPOBJ_SINGLE_DATUM;
-	}
-
 	return_ACPI_STATUS(AE_OK);
 }
 
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 531000fc77d..8819d2ac5ae 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -194,7 +194,7 @@ acpi_ex_system_memory_space_handler(u32 function,
 	    ((u64) address - (u64) mem_info->mapped_physical_address);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "System-Memory (width %d) R/W %d Address=%8.8X%8.8X\n",
+			  "System-Memory (width %u) R/W %u Address=%8.8X%8.8X\n",
 			  bit_width, function,
 			  ACPI_FORMAT_NATIVE_UINT(address)));
 
@@ -297,7 +297,7 @@ acpi_ex_system_io_space_handler(u32 function,
 	ACPI_FUNCTION_TRACE(ex_system_io_space_handler);
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "System-IO (width %d) R/W %d Address=%8.8X%8.8X\n",
+			  "System-IO (width %u) R/W %u Address=%8.8X%8.8X\n",
 			  bit_width, function,
 			  ACPI_FORMAT_NATIVE_UINT(address)));
 
@@ -373,7 +373,7 @@ acpi_ex_pci_config_space_handler(u32 function,
 	pci_register = (u16) (u32) address;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "Pci-Config %d (%d) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
+			  "Pci-Config %u (%u) Seg(%04x) Bus(%04x) Dev(%04x) Func(%04x) Reg(%04x)\n",
 			  function, bit_width, pci_id->segment, pci_id->bus,
 			  pci_id->device, pci_id->function, pci_register));
 
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 3450309c278..14750db2a1b 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -57,7 +57,7 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 
 /******************************************************************************
  *
- * FUNCTION:	acpi_hw_gpe_register_bit
+ * FUNCTION:	acpi_hw_get_gpe_register_bit
  *
  * PARAMETERS:	gpe_event_info	    - Info block for the GPE
  *		gpe_register_info   - Info block for the GPE register
@@ -69,7 +69,7 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
  *
  ******************************************************************************/
 
-u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
+u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
 			     struct acpi_gpe_register_info *gpe_register_info)
 {
 	return (u32)1 << (gpe_event_info->gpe_number -
@@ -115,7 +115,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 
 	/* Set ot clear just the bit that corresponds to this GPE */
 
-	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
 	switch (action) {
 	case ACPI_GPE_COND_ENABLE:
@@ -143,31 +143,6 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
 
 /******************************************************************************
  *
- * FUNCTION:    acpi_hw_write_gpe_enable_reg
- *
- * PARAMETERS:  gpe_event_info      - Info block for the GPE to be enabled
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Write a GPE enable register.  Note: The bit for this GPE must
- *              already be cleared or set in the parent register
- *              enable_for_run mask.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_ENTRY();
-
-	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE);
-	return (status);
-}
-
-/******************************************************************************
- *
  * FUNCTION:    acpi_hw_clear_gpe
  *
  * PARAMETERS:  gpe_event_info      - Info block for the GPE to be cleared
@@ -193,7 +168,7 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
 		return (AE_NOT_EXIST);
 	}
 
-	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
 
 	/*
@@ -241,7 +216,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
 
 	/* Get the register bitmask for this GPE */
 
-	register_bit = acpi_hw_gpe_register_bit(gpe_event_info,
+	register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
 						gpe_register_info);
 
 	/* GPE currently enabled? (enabled for runtime?) */
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 36eb803dd9d..3796811276a 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -307,7 +307,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 		return_ACPI_STATUS(status);
 	}
 	ACPI_DEBUG_PRINT((ACPI_DB_INIT,
-			  "Entering sleep state [S%d]\n", sleep_state));
+			  "Entering sleep state [S%u]\n", sleep_state));
 
 	/* Clear the SLP_EN and SLP_TYP fields */
 
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index 3a2814676ac..0cd925be5fc 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -338,8 +338,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 			 */
 			while (!acpi_ns_opens_scope(prefix_node->type) &&
 			       prefix_node->type != ACPI_TYPE_ANY) {
-				prefix_node =
-				    acpi_ns_get_parent_node(prefix_node);
+				prefix_node = prefix_node->parent;
 			}
 		}
 	}
@@ -419,7 +418,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 				/* Backup to the parent node */
 
 				num_carats++;
-				this_node = acpi_ns_get_parent_node(this_node);
+				this_node = this_node->parent;
 				if (!this_node) {
 
 					/* Current scope has no parent scope */
@@ -433,7 +432,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 
 			if (search_parent_flag == ACPI_NS_NO_UPSEARCH) {
 				ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
-						  "Search scope is [%4.4s], path has %d carat(s)\n",
+						  "Search scope is [%4.4s], path has %u carat(s)\n",
 						  acpi_ut_get_node_name
 						  (this_node), num_carats));
 			}
@@ -495,7 +494,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info,
 			path++;
 
 			ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
-					  "Multi Pathname (%d Segments, Flags=%X)\n",
+					  "Multi Pathname (%u Segments, Flags=%X)\n",
 					  num_segments, flags));
 			break;
 
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 982269c1fa4..1e5ff803d9a 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -159,7 +159,7 @@ void acpi_ns_remove_node(struct acpi_namespace_node *node)
 
 	ACPI_FUNCTION_TRACE_PTR(ns_remove_node, node);
 
-	parent_node = acpi_ns_get_parent_node(node);
+	parent_node = node->parent;
 
 	prev_node = NULL;
 	next_node = parent_node->child;
@@ -168,29 +168,20 @@ void acpi_ns_remove_node(struct acpi_namespace_node *node)
 
 	while (next_node != node) {
 		prev_node = next_node;
-		next_node = prev_node->peer;
+		next_node = next_node->peer;
 	}
 
 	if (prev_node) {
 
 		/* Node is not first child, unlink it */
 
-		prev_node->peer = next_node->peer;
-		if (next_node->flags & ANOBJ_END_OF_PEER_LIST) {
-			prev_node->flags |= ANOBJ_END_OF_PEER_LIST;
-		}
+		prev_node->peer = node->peer;
 	} else {
-		/* Node is first child (has no previous peer) */
-
-		if (next_node->flags & ANOBJ_END_OF_PEER_LIST) {
-
-			/* No peers at all */
-
-			parent_node->child = NULL;
-		} else {	/* Link peer list to parent */
-
-			parent_node->child = next_node->peer;
-		}
+		/*
+		 * Node is first child (has no previous peer).
+		 * Link peer list to parent
+		 */
+		parent_node->child = node->peer;
 	}
 
 	/* Delete the node and any attached objects */
@@ -228,33 +219,42 @@ void acpi_ns_install_node(struct acpi_walk_state *walk_state, struct acpi_namesp
 
 	ACPI_FUNCTION_TRACE(ns_install_node);
 
-	/*
-	 * Get the owner ID from the Walk state. The owner ID is used to track
-	 * table deletion and deletion of objects created by methods.
-	 */
 	if (walk_state) {
+		/*
+		 * Get the owner ID from the Walk state. The owner ID is used to
+		 * track table deletion and deletion of objects created by methods.
+		 */
 		owner_id = walk_state->owner_id;
+
+		if ((walk_state->method_desc) &&
+		    (parent_node != walk_state->method_node)) {
+			/*
+			 * A method is creating a new node that is not a child of the
+			 * method (it is non-local). Mark the executing method as having
+			 * modified the namespace. This is used for cleanup when the
+			 * method exits.
+			 */
+			walk_state->method_desc->method.flags |=
+			    AOPOBJ_MODIFIED_NAMESPACE;
+		}
 	}
 
 	/* Link the new entry into the parent and existing children */
 
+	node->peer = NULL;
+	node->parent = parent_node;
 	child_node = parent_node->child;
+
 	if (!child_node) {
 		parent_node->child = node;
-		node->flags |= ANOBJ_END_OF_PEER_LIST;
-		node->peer = parent_node;
 	} else {
-		while (!(child_node->flags & ANOBJ_END_OF_PEER_LIST)) {
+		/* Add node to the end of the peer list */
+
+		while (child_node->peer) {
 			child_node = child_node->peer;
 		}
 
 		child_node->peer = node;
-
-		/* Clear end-of-list flag */
-
-		child_node->flags &= ~ANOBJ_END_OF_PEER_LIST;
-		node->flags |= ANOBJ_END_OF_PEER_LIST;
-		node->peer = parent_node;
 	}
 
 	/* Init the new entry */
@@ -288,9 +288,8 @@ void acpi_ns_install_node(struct acpi_walk_state *walk_state, struct acpi_namesp
 
 void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
 {
-	struct acpi_namespace_node *child_node;
 	struct acpi_namespace_node *next_node;
-	u8 flags;
+	struct acpi_namespace_node *node_to_delete;
 
 	ACPI_FUNCTION_TRACE_PTR(ns_delete_children, parent_node);
 
@@ -298,37 +297,26 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node)
 		return_VOID;
 	}
 
-	/* If no children, all done! */
-
-	child_node = parent_node->child;
-	if (!child_node) {
-		return_VOID;
-	}
-
 	/* Deallocate all children at this level */
 
-	do {
-
-		/* Get the things we need */
-
-		next_node = child_node->peer;
-		flags = child_node->flags;
+	next_node = parent_node->child;
+	while (next_node) {
 
 		/* Grandchildren should have all been deleted already */
 
-		if (child_node->child) {
+		if (next_node->child) {
 			ACPI_ERROR((AE_INFO, "Found a grandchild! P=%p C=%p",
-				    parent_node, child_node));
+				    parent_node, next_node));
 		}
 
 		/*
 		 * Delete this child node and move on to the next child in the list.
 		 * No need to unlink the node since we are deleting the entire branch.
 		 */
-		acpi_ns_delete_node(child_node);
-		child_node = next_node;
-
-	} while (!(flags & ANOBJ_END_OF_PEER_LIST));
+		node_to_delete = next_node;
+		next_node = next_node->peer;
+		acpi_ns_delete_node(node_to_delete);
+	};
 
 	/* Clear the parent's child pointer */
 
@@ -405,7 +393,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node)
 
 			/* Move up the tree to the grandparent */
 
-			parent_node = acpi_ns_get_parent_node(parent_node);
+			parent_node = parent_node->parent;
 		}
 	}
 
@@ -510,7 +498,7 @@ void acpi_ns_delete_namespace_by_owner(acpi_owner_id owner_id)
 
 			/* Move up the tree to the grandparent */
 
-			parent_node = acpi_ns_get_parent_node(parent_node);
+			parent_node = parent_node->parent;
 		}
 	}
 
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 2110cc2360f..a54dc39e304 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -441,7 +441,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 			return (AE_OK);
 		}
 
-		acpi_os_printf("(R%d)", obj_desc->common.reference_count);
+		acpi_os_printf("(R%u)", obj_desc->common.reference_count);
 
 		switch (type) {
 		case ACPI_TYPE_METHOD:
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 4e5272c313e..660a2728908 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -103,8 +103,8 @@ acpi_status acpi_ns_initialize_objects(void)
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
-			      "\nInitialized %hd/%hd Regions %hd/%hd Fields %hd/%hd "
-			      "Buffers %hd/%hd Packages (%hd nodes)\n",
+			      "\nInitialized %u/%u Regions %u/%u Fields %u/%u "
+			      "Buffers %u/%u Packages (%u nodes)\n",
 			      info.op_region_init, info.op_region_count,
 			      info.field_init, info.field_count,
 			      info.buffer_init, info.buffer_count,
@@ -112,9 +112,9 @@ acpi_status acpi_ns_initialize_objects(void)
 			      info.object_count));
 
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "%hd Control Methods found\n", info.method_count));
+			  "%u Control Methods found\n", info.method_count));
 	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-			  "%hd Op Regions found\n", info.op_region_count));
+			  "%u Op Regions found\n", info.op_region_count));
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -208,8 +208,8 @@ acpi_status acpi_ns_initialize_devices(void)
 	}
 
 	ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
-			      "\nExecuted %hd _INI methods requiring %hd _STA executions "
-			      "(examined %hd objects)\n",
+			      "\nExecuted %u _INI methods requiring %u _STA executions "
+			      "(examined %u objects)\n",
 			      info.num_INI, info.num_STA, info.device_count));
 
 	return_ACPI_STATUS(status);
@@ -410,7 +410,7 @@ acpi_ns_find_ini_methods(acpi_handle obj_handle,
 	 * The only _INI methods that we care about are those that are
 	 * present under Device, Processor, and Thermal objects.
 	 */
-	parent_node = acpi_ns_get_parent_node(node);
+	parent_node = node->parent;
 	switch (parent_node->type) {
 	case ACPI_TYPE_DEVICE:
 	case ACPI_TYPE_PROCESSOR:
@@ -420,7 +420,7 @@ acpi_ns_find_ini_methods(acpi_handle obj_handle,
 
 		while (parent_node) {
 			parent_node->flags |= ANOBJ_SUBTREE_HAS_INI;
-			parent_node = acpi_ns_get_parent_node(parent_node);
+			parent_node = parent_node->parent;
 		}
 		break;
 
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index 7dea0031605..d3104af57e1 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -93,7 +93,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
 		/* Put the name into the buffer */
 
 		ACPI_MOVE_32_TO_32((name_buffer + index), &parent_node->name);
-		parent_node = acpi_ns_get_parent_node(parent_node);
+		parent_node = parent_node->parent;
 
 		/* Prefix name with the path separator */
 
@@ -198,7 +198,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
 			return 0;
 		}
 		size += ACPI_PATH_SEGMENT_LENGTH;
-		next_node = acpi_ns_get_parent_node(next_node);
+		next_node = next_node->parent;
 	}
 
 	if (!size) {
diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c
index 27cda52c76b..5808c89e9fa 100644
--- a/drivers/acpi/acpica/nsparse.c
+++ b/drivers/acpi/acpica/nsparse.c
@@ -136,8 +136,8 @@ acpi_ns_one_complete_parse(u32 pass_number,
 
 	/* Parse the AML */
 
-	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "*PARSE* pass %d parse\n",
-			  (unsigned)pass_number));
+	ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "*PARSE* pass %u parse\n",
+			  pass_number));
 	status = acpi_ps_parse_aml(walk_state);
 
       cleanup:
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index d4be37751be..d1c13669266 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -556,7 +556,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data,
 
 		/* Need an Integer - create a zero-value integer */
 
-		new_object = acpi_ut_create_integer_object(0);
+		new_object = acpi_ut_create_integer_object((u64)0);
 	} else if (expected_btypes & ACPI_RTYPE_STRING) {
 
 		/* Need a String - create a NULL string */
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
index 61bd0f6755d..4009498fbab 100644
--- a/drivers/acpi/acpica/nsrepair2.c
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -112,6 +112,13 @@ acpi_ns_sort_list(union acpi_operand_object **elements,
  * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs
  * _PSS: Sort the list descending by Power
  * _TSS: Sort the list descending by Power
+ *
+ * Names that must be packages, but cannot be sorted:
+ *
+ * _BCL: Values are tied to the Package index where they appear, and cannot
+ * be moved or sorted. These index values are used for _BQC and _BCM.
+ * However, we can fix the case where a buffer is returned, by converting
+ * it to a Package of integers.
  */
 static const struct acpi_repair_info acpi_ns_repairable_names[] = {
 	{"_ALR", acpi_ns_repair_ALR},
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index a8e42b5e946..41102a84272 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -152,17 +152,6 @@ acpi_ns_search_one_scope(u32 target_name,
 			return_ACPI_STATUS(AE_OK);
 		}
 
-		/*
-		 * The last entry in the list points back to the parent,
-		 * so a flag is used to indicate the end-of-list
-		 */
-		if (node->flags & ANOBJ_END_OF_PEER_LIST) {
-
-			/* Searched entire list, we are done */
-
-			break;
-		}
-
 		/* Didn't match name, move on to the next peer object */
 
 		node = node->peer;
@@ -217,7 +206,7 @@ acpi_ns_search_parent_tree(u32 target_name,
 
 	ACPI_FUNCTION_TRACE(ns_search_parent_tree);
 
-	parent_node = acpi_ns_get_parent_node(node);
+	parent_node = node->parent;
 
 	/*
 	 * If there is no parent (i.e., we are at the root) or type is "local",
@@ -261,7 +250,7 @@ acpi_ns_search_parent_tree(u32 target_name,
 
 		/* Not found here, go up another level (until we reach the root) */
 
-		parent_node = acpi_ns_get_parent_node(parent_node);
+		parent_node = parent_node->parent;
 	}
 
 	/* Not found in parent tree */
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index bab559712da..e1add3491b0 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -847,116 +847,3 @@ acpi_ns_get_node(struct acpi_namespace_node *prefix_node,
 	ACPI_FREE(internal_path);
 	return_ACPI_STATUS(status);
 }
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ns_get_parent_node
- *
- * PARAMETERS:  Node       - Current table entry
- *
- * RETURN:      Parent entry of the given entry
- *
- * DESCRIPTION: Obtain the parent entry for a given entry in the namespace.
- *
- ******************************************************************************/
-
-struct acpi_namespace_node *acpi_ns_get_parent_node(struct acpi_namespace_node
-						    *node)
-{
-	ACPI_FUNCTION_ENTRY();
-
-	if (!node) {
-		return (NULL);
-	}
-
-	/*
-	 * Walk to the end of this peer list. The last entry is marked with a flag
-	 * and the peer pointer is really a pointer back to the parent. This saves
-	 * putting a parent back pointer in each and every named object!
-	 */
-	while (!(node->flags & ANOBJ_END_OF_PEER_LIST)) {
-		node = node->peer;
-	}
-
-	return (node->peer);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ns_get_next_valid_node
- *
- * PARAMETERS:  Node       - Current table entry
- *
- * RETURN:      Next valid Node in the linked node list. NULL if no more valid
- *              nodes.
- *
- * DESCRIPTION: Find the next valid node within a name table.
- *              Useful for implementing NULL-end-of-list loops.
- *
- ******************************************************************************/
-
-struct acpi_namespace_node *acpi_ns_get_next_valid_node(struct
-							acpi_namespace_node
-							*node)
-{
-
-	/* If we are at the end of this peer list, return NULL */
-
-	if (node->flags & ANOBJ_END_OF_PEER_LIST) {
-		return NULL;
-	}
-
-	/* Otherwise just return the next peer */
-
-	return (node->peer);
-}
-
-#ifdef ACPI_OBSOLETE_FUNCTIONS
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ns_find_parent_name
- *
- * PARAMETERS:  *child_node            - Named Obj whose name is to be found
- *
- * RETURN:      The ACPI name
- *
- * DESCRIPTION: Search for the given obj in its parent scope and return the
- *              name segment, or "????" if the parent name can't be found
- *              (which "should not happen").
- *
- ******************************************************************************/
-
-acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node * child_node)
-{
-	struct acpi_namespace_node *parent_node;
-
-	ACPI_FUNCTION_TRACE(ns_find_parent_name);
-
-	if (child_node) {
-
-		/* Valid entry.  Get the parent Node */
-
-		parent_node = acpi_ns_get_parent_node(child_node);
-		if (parent_node) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-					  "Parent of %p [%4.4s] is %p [%4.4s]\n",
-					  child_node,
-					  acpi_ut_get_node_name(child_node),
-					  parent_node,
-					  acpi_ut_get_node_name(parent_node)));
-
-			if (parent_node->name.integer) {
-				return_VALUE((acpi_name) parent_node->name.
-					     integer);
-			}
-		}
-
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "Unable to find parent of %p (%4.4s)\n",
-				  child_node,
-				  acpi_ut_get_node_name(child_node)));
-	}
-
-	return_VALUE(ACPI_UNKNOWN_NAME);
-}
-#endif
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 00e79fb2602..2cd5be8fe10 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -79,15 +79,6 @@ struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
 		return parent_node->child;
 	}
 
-	/*
-	 * Get the next node.
-	 *
-	 * If we are at the end of this peer list, return NULL
-	 */
-	if (child_node->flags & ANOBJ_END_OF_PEER_LIST) {
-		return NULL;
-	}
-
 	/* Otherwise just return the next peer */
 
 	return child_node->peer;
@@ -146,9 +137,9 @@ struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
 			return (next_node);
 		}
 
-		/* Otherwise, move on to the next node */
+		/* Otherwise, move on to the next peer node */
 
-		next_node = acpi_ns_get_next_valid_node(next_node);
+		next_node = next_node->peer;
 	}
 
 	/* Not found */
@@ -355,7 +346,7 @@ acpi_ns_walk_namespace(acpi_object_type type,
 			 */
 			level--;
 			child_node = parent_node;
-			parent_node = acpi_ns_get_parent_node(parent_node);
+			parent_node = parent_node->parent;
 
 			node_previously_visited = TRUE;
 		}
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index eafef24ea44..a1f04e9b803 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -190,7 +190,7 @@ acpi_status acpi_get_parent(acpi_handle handle, acpi_handle * ret_handle)
 
 	/* Get the parent entry */
 
-	parent_node = acpi_ns_get_parent_node(node);
+	parent_node = node->parent;
 	*ret_handle = ACPI_CAST_PTR(acpi_handle, parent_node);
 
 	/* Return exception if parent is null */
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 66116750a0f..0558747579e 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -813,10 +813,10 @@ acpi_status acpi_ut_init_globals(void)
 	acpi_gbl_root_node_struct.name.integer = ACPI_ROOT_NAME;
 	acpi_gbl_root_node_struct.descriptor_type = ACPI_DESC_TYPE_NAMED;
 	acpi_gbl_root_node_struct.type = ACPI_TYPE_DEVICE;
+	acpi_gbl_root_node_struct.parent = NULL;
 	acpi_gbl_root_node_struct.child = NULL;
 	acpi_gbl_root_node_struct.peer = NULL;
 	acpi_gbl_root_node_struct.object = NULL;
-	acpi_gbl_root_node_struct.flags = ANOBJ_END_OF_PEER_LIST;
 
 #ifdef ACPI_DEBUG_OUTPUT
 	acpi_gbl_lowest_stack_pointer = ACPI_CAST_PTR(acpi_size, ACPI_SIZE_MAX);
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index db9d8ca5798..7f8cefcb2b3 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -293,12 +293,8 @@ acpi_status acpi_initialize_objects(u32 flags)
 	 * Complete the GPE initialization for the GPE blocks defined in the FADT
 	 * (GPE block 0 and 1).
 	 *
-	 * Note1: This is where the _PRW methods are executed for the GPEs. These
-	 * methods can only be executed after the SCI and Global Lock handlers are
-	 * installed and initialized.
-	 *
-	 * Note2: Currently, there seems to be no need to run the _REG methods
-	 * before execution of the _PRW methods and enabling of the GPEs.
+	 * NOTE: Currently, there seems to be no need to run the _REG methods
+	 * before enabling the GPEs.
 	 */
 	if (!(flags & ACPI_NO_EVENT_INIT)) {
 		status = acpi_ev_install_fadt_gpes();
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index 7d857dabdde..1575a9b51f1 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -424,8 +424,7 @@ static int acpi_button_add(struct acpi_device *device)
 	if (device->wakeup.flags.valid) {
 		/* Button's GPE is run-wake GPE */
 		acpi_enable_gpe(device->wakeup.gpe_device,
-				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_RUNTIME);
+				device->wakeup.gpe_number);
 		device->wakeup.run_wake_count++;
 		device->wakeup.state.enabled = 1;
 	}
@@ -448,8 +447,7 @@ static int acpi_button_remove(struct acpi_device *device, int type)
 
 	if (device->wakeup.flags.valid) {
 		acpi_disable_gpe(device->wakeup.gpe_device,
-				device->wakeup.gpe_number,
-				ACPI_GPE_TYPE_RUNTIME);
+				device->wakeup.gpe_number);
 		device->wakeup.run_wake_count--;
 		device->wakeup.state.enabled = 0;
 	}
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 1fa0aafebe2..f31291ba94d 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -303,11 +303,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 	pr_debug(PREFIX "transaction start\n");
 	/* disable GPE during transaction if storm is detected */
 	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
-		/*
-		 * It has to be disabled at the hardware level regardless of the
-		 * GPE reference counting, so that it doesn't trigger.
-		 */
-		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
+		/* It has to be disabled, so that it doesn't trigger. */
+		acpi_disable_gpe(NULL, ec->gpe);
 	}
 
 	status = acpi_ec_transaction_unlocked(ec, t);
@@ -316,12 +313,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 	ec_check_sci_sync(ec, acpi_ec_read_status(ec));
 	if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
 		msleep(1);
-		/*
-		 * It is safe to enable the GPE outside of the transaction.  Use
-		 * acpi_set_gpe() for that, since we used it to disable the GPE
-		 * above.
-		 */
-		acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
+		/* It is safe to enable the GPE outside of the transaction. */
+		acpi_enable_gpe(NULL, ec->gpe);
 	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
 		pr_info(PREFIX "GPE storm detected, "
 			"transactions will use polling mode\n");
@@ -746,7 +739,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	acpi_enable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+	acpi_enable_gpe(NULL, ec->gpe);
 	status = acpi_install_address_space_handler(ec->handle,
 						    ACPI_ADR_SPACE_EC,
 						    &acpi_ec_space_handler,
@@ -763,7 +756,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
 		} else {
 			acpi_remove_gpe_handler(NULL, ec->gpe,
 				&acpi_ec_gpe_handler);
-			acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+			acpi_disable_gpe(NULL, ec->gpe);
 			return -ENODEV;
 		}
 	}
@@ -774,7 +767,7 @@ static int ec_install_handlers(struct acpi_ec *ec)
 
 static void ec_remove_handlers(struct acpi_ec *ec)
 {
-	acpi_disable_gpe(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+	acpi_disable_gpe(NULL, ec->gpe);
 	if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
 				ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
 		pr_err(PREFIX "failed to remove space handler\n");
@@ -1018,22 +1011,6 @@ error:
 	return -ENODEV;
 }
 
-static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state)
-{
-	struct acpi_ec *ec = acpi_driver_data(device);
-	/* Stop using the GPE, but keep it reference counted. */
-	acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_DISABLE);
-	return 0;
-}
-
-static int acpi_ec_resume(struct acpi_device *device)
-{
-	struct acpi_ec *ec = acpi_driver_data(device);
-	/* Enable the GPE again, but don't reference count it once more. */
-	acpi_set_gpe(NULL, ec->gpe, ACPI_GPE_ENABLE);
-	return 0;
-}
-
 static struct acpi_driver acpi_ec_driver = {
 	.name = "ec",
 	.class = ACPI_EC_CLASS,
@@ -1041,8 +1018,6 @@ static struct acpi_driver acpi_ec_driver = {
 	.ops = {
 		.add = acpi_ec_add,
 		.remove = acpi_ec_remove,
-		.suspend = acpi_ec_suspend,
-		.resume = acpi_ec_resume,
 		},
 };
 
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 78418ce4fc7..f14d3f251d2 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -191,36 +191,11 @@ acpi_status __init acpi_os_initialize(void)
 	return AE_OK;
 }
 
-static void bind_to_cpu0(struct work_struct *work)
-{
-	set_cpus_allowed_ptr(current, cpumask_of(0));
-	kfree(work);
-}
-
-static void bind_workqueue(struct workqueue_struct *wq)
-{
-	struct work_struct *work;
-
-	work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
-	INIT_WORK(work, bind_to_cpu0);
-	queue_work(wq, work);
-}
-
 acpi_status acpi_os_initialize1(void)
 {
-	/*
-	 * On some machines, a software-initiated SMI causes corruption unless
-	 * the SMI runs on CPU 0.  An SMI can be initiated by any AML, but
-	 * typically it's done in GPE-related methods that are run via
-	 * workqueues, so we can avoid the known corruption cases by binding
-	 * the workqueues to CPU 0.
-	 */
-	kacpid_wq = create_singlethread_workqueue("kacpid");
-	bind_workqueue(kacpid_wq);
-	kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
-	bind_workqueue(kacpi_notify_wq);
-	kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
-	bind_workqueue(kacpi_hotplug_wq);
+	kacpid_wq = create_workqueue("kacpid");
+	kacpi_notify_wq = create_workqueue("kacpi_notify");
+	kacpi_hotplug_wq = create_workqueue("kacpi_hotplug");
 	BUG_ON(!kacpid_wq);
 	BUG_ON(!kacpi_notify_wq);
 	BUG_ON(!kacpi_hotplug_wq);
@@ -766,7 +741,14 @@ static acpi_status __acpi_os_execute(acpi_execute_type type,
 	else
 		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
 
-	ret = queue_work(queue, &dpc->work);
+	/*
+	 * On some machines, a software-initiated SMI causes corruption unless
+	 * the SMI runs on CPU 0.  An SMI can be initiated by any AML, but
+	 * typically it's done in GPE-related methods that are run via
+	 * workqueues, so we can avoid the known corruption cases by always
+	 * queueing on CPU 0.
+	 */
+	ret = queue_work_on(0, queue, &dpc->work);
 
 	if (!ret) {
 		printk(KERN_ERR PREFIX
@@ -1064,26 +1046,6 @@ static int __init acpi_serialize_setup(char *str)
 
 __setup("acpi_serialize", acpi_serialize_setup);
 
-/*
- * Wake and Run-Time GPES are expected to be separate.
- * We disable wake-GPEs at run-time to prevent spurious
- * interrupts.
- *
- * However, if a system exists that shares Wake and
- * Run-time events on the same GPE this flag is available
- * to tell Linux to keep the wake-time GPEs enabled at run-time.
- */
-static int __init acpi_wake_gpes_always_on_setup(char *str)
-{
-	printk(KERN_INFO PREFIX "wake GPEs not disabled\n");
-
-	acpi_gbl_leave_wake_gpes_disabled = FALSE;
-
-	return 1;
-}
-
-__setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
-
 /* Check of resource interference between native drivers and ACPI
  * OperationRegions (SystemIO and System Memory only).
  * IO ports and memory declared in ACPI might be used by the ACPI subsystem
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 4eac59393ed..1f67057af2a 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -33,6 +33,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/pci.h>
 #include <linux/pci-acpi.h>
+#include <linux/pci-aspm.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
 #include <acpi/acpi_bus.h>
@@ -543,6 +544,14 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	if (flags != base_flags)
 		acpi_pci_osc_support(root, flags);
 
+	status = acpi_pci_osc_control_set(root->device->handle,
+					  OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_INFO "Unable to assume PCIe control: Disabling ASPM\n");
+		pcie_no_aspm();
+	}
+
 	pci_acpi_add_bus_pm_notifier(device, root->bus);
 	if (device->wakeup.flags.run_wake)
 		device_set_run_wake(root->bus->bridge, true);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index e9a8026d39f..b4c2f3bdade 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -164,7 +164,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 	if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
 		return;
 
-	if (boot_cpu_has(X86_FEATURE_AMDC1E))
+	if (c1e_detected)
 		type = ACPI_STATE_C1;
 
 	/*
@@ -264,7 +264,7 @@ int acpi_processor_resume(struct acpi_device * device)
 	return 0;
 }
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+#if defined(CONFIG_X86)
 static void tsc_check_state(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 7f2e051ed4f..b23825ecfa3 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -740,6 +740,8 @@ acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
 		device->wakeup.resources.handles[i] = element->reference.handle;
 	}
 
+	acpi_gpe_can_wake(device->wakeup.gpe_device, device->wakeup.gpe_number);
+
 	return AE_OK;
 }
 
@@ -764,8 +766,9 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 		return;
 	}
 
-	status = acpi_get_gpe_status(NULL, device->wakeup.gpe_number,
-					&event_status);
+	status = acpi_get_gpe_status(device->wakeup.gpe_device,
+					device->wakeup.gpe_number,
+						&event_status);
 	if (status == AE_OK)
 		device->wakeup.flags.run_wake =
 				!!(event_status & ACPI_EVENT_FLAG_HANDLE);
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 2862c781b37..e143203254a 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -663,18 +663,9 @@ int acpi_pm_device_sleep_wake(struct device *dev, bool enable)
 		return -ENODEV;
 	}
 
-	if (enable) {
-		error = acpi_enable_wakeup_device_power(adev,
-						acpi_target_sleep_state);
-		if (!error)
-			acpi_enable_gpe(adev->wakeup.gpe_device,
-					adev->wakeup.gpe_number,
-					ACPI_GPE_TYPE_WAKE);
-	} else {
-		acpi_disable_gpe(adev->wakeup.gpe_device, adev->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE);
-		error = acpi_disable_wakeup_device_power(adev);
-	}
+	error = enable ?
+		acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) :
+		acpi_disable_wakeup_device_power(adev);
 	if (!error)
 		dev_info(dev, "wake-up capability %s by ACPI\n",
 				enable ? "enabled" : "disabled");
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index f8db50a0941..5981bd07e20 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -388,12 +388,10 @@ static ssize_t counter_set(struct kobject *kobj,
 	if (index < num_gpes) {
 		if (!strcmp(buf, "disable\n") &&
 				(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_disable_gpe(handle, index,
-						ACPI_GPE_TYPE_RUNTIME);
+			result = acpi_disable_gpe(handle, index);
 		else if (!strcmp(buf, "enable\n") &&
 				!(status & ACPI_EVENT_FLAG_ENABLED))
-			result = acpi_enable_gpe(handle, index,
-						ACPI_GPE_TYPE_RUNTIME);
+			result = acpi_enable_gpe(handle, index);
 		else if (!strcmp(buf, "clear\n") &&
 				(status & ACPI_EVENT_FLAG_SET))
 			result = acpi_clear_gpe(handle, index);
diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c
index 388747a7ef4..c80537bc323 100644
--- a/drivers/acpi/wakeup.c
+++ b/drivers/acpi/wakeup.c
@@ -64,13 +64,14 @@ void acpi_enable_wakeup_device(u8 sleep_state)
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+		if (!dev->wakeup.flags.valid
+		    || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count)
 		    || sleep_state > (u32) dev->wakeup.sleep_state)
 			continue;
 
 		/* The wake-up power should have been enabled already. */
-		acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE);
+		acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_ENABLE);
 	}
 }
 
@@ -89,13 +90,16 @@ void acpi_disable_wakeup_device(u8 sleep_state)
 		struct acpi_device *dev =
 			container_of(node, struct acpi_device, wakeup_list);
 
-		if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled
+		if (!dev->wakeup.flags.valid
+		    || !(dev->wakeup.state.enabled || dev->wakeup.prepare_count)
 		    || (sleep_state > (u32) dev->wakeup.sleep_state))
 			continue;
 
-		acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
-				ACPI_GPE_TYPE_WAKE);
-		acpi_disable_wakeup_device_power(dev);
+		acpi_gpe_wakeup(dev->wakeup.gpe_device, dev->wakeup.gpe_number,
+				ACPI_GPE_DISABLE);
+
+		if (dev->wakeup.state.enabled)
+			acpi_disable_wakeup_device_power(dev);
 	}
 }
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index aa85a98d3a4..8fae6afd6a3 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -187,6 +187,15 @@ config ATA_PIIX
 
 	  If unsure, say N.
 
+config SATA_DWC
+	tristate "DesignWare Cores SATA support"
+	depends on 460EX
+	help
+	  This option enables support for the on-chip SATA controller of the
+	  AppliedMicro processor 460EX.
+
+	  If unsure, say N.
+
 config SATA_MV
 	tristate "Marvell SATA support"
 	help
@@ -796,6 +805,15 @@ config PATA_RZ1000
 
 	  If unsure, say N.
 
+config PATA_SAMSUNG_CF
+	tristate "Samsung SoC PATA support"
+	depends on SAMSUNG_DEV_IDE
+	help
+	  This option enables basic support for Samsung's S3C/S5P board
+	  PATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
 config PATA_WINBOND_VLB
 	tristate "Winbond W83759A VLB PATA support (Experimental)"
 	depends on ISA && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7ef89d73df6..6540632bda0 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
 obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
@@ -87,6 +88,7 @@ obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
+obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
 obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 
 # Should be last but two libata driver
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f2522534ae6..fe75d8befc3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1042,7 +1042,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	VPRINTK("ENTER\n");
 
-	WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+	WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 5e11b160f24..4e97f33cca4 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -54,19 +54,13 @@ static int __init ahci_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (pdata && pdata->init) {
-		rc = pdata->init(dev);
-		if (rc)
-			return rc;
-	}
-
 	if (pdata && pdata->ata_port_info)
 		pi = *pdata->ata_port_info;
 
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv) {
-		rc = -ENOMEM;
-		goto err0;
+		dev_err(dev, "can't alloc ahci_host_priv\n");
+		return -ENOMEM;
 	}
 
 	hpriv->flags |= (unsigned long)pi.private_data;
@@ -74,8 +68,19 @@ static int __init ahci_probe(struct platform_device *pdev)
 	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
 	if (!hpriv->mmio) {
 		dev_err(dev, "can't map %pR\n", mem);
-		rc = -ENOMEM;
-		goto err0;
+		return -ENOMEM;
+	}
+
+	/*
+	 * Some platforms might need to prepare for mmio region access,
+	 * which could be done in the following init call. So, the mmio
+	 * region shouldn't be accessed before init (if provided) has
+	 * returned successfully.
+	 */
+	if (pdata && pdata->init) {
+		rc = pdata->init(dev, hpriv->mmio);
+		if (rc)
+			return rc;
 	}
 
 	ahci_save_initial_config(dev, hpriv,
@@ -166,7 +171,6 @@ static int __devexit ahci_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver ahci_driver = {
-	.probe = ahci_probe,
 	.remove = __devexit_p(ahci_remove),
 	.driver = {
 		.name = "ahci",
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 7107a6929de..cc5f7726bde 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -54,7 +54,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 	const struct pci_device_id *id = ap->host->private_data;
 	int dma_enabled = 0;
 	struct ata_device *dev;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (id->driver_data & ATA_GEN_FORCE_DMA) {
 		dma_enabled = 0xff;
@@ -63,9 +62,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
-		dma_enabled = 0xFF;
-
 	ata_for_each_dev(dev, link, ENABLED) {
 		/* We don't really care */
 		dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7409f98d2ae..3971bc0a483 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -158,6 +158,7 @@ struct piix_map_db {
 struct piix_host_priv {
 	const int *map;
 	u32 saved_iocfg;
+	spinlock_t sidpr_lock;	/* FIXME: remove once locking in EH is fixed */
 	void __iomem *sidpr;
 };
 
@@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
 			       unsigned int reg, u32 *val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	*val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
 				unsigned int reg, u32 val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	spin_lock_init(&hpriv->sidpr_lock);
 
 	/* Save IOCFG, this will be used for cable detection, quirk
 	 * detection and restoration on detach.  This is necessary
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ddf8e486278..4972fdf4bd3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -98,8 +98,6 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
 unsigned int ata_print_id = 1;
 
-struct workqueue_struct *ata_aux_wq;
-
 struct ata_force_param {
 	const char	*name;
 	unsigned int	cbl;
@@ -4167,15 +4165,13 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WDC AC23200L",	"21.10N21",	ATA_HORKAGE_NODMA },
 	{ "Compaq CRD-8241B", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "CRD-8400B",		NULL, 		ATA_HORKAGE_NODMA },
-	{ "CRD-8480B",		NULL,		ATA_HORKAGE_NODMA },
-	{ "CRD-8482B",		NULL,		ATA_HORKAGE_NODMA },
+	{ "CRD-848[02]B",	NULL,		ATA_HORKAGE_NODMA },
 	{ "CRD-84",		NULL,		ATA_HORKAGE_NODMA },
 	{ "SanDisk SDP3B",	NULL,		ATA_HORKAGE_NODMA },
 	{ "SanDisk SDP3B-64",	NULL,		ATA_HORKAGE_NODMA },
 	{ "SANYO CD-ROM CRD",	NULL,		ATA_HORKAGE_NODMA },
 	{ "HITACHI CDR-8",	NULL,		ATA_HORKAGE_NODMA },
-	{ "HITACHI CDR-8335",	NULL,		ATA_HORKAGE_NODMA },
-	{ "HITACHI CDR-8435",	NULL,		ATA_HORKAGE_NODMA },
+	{ "HITACHI CDR-8[34]35",NULL,		ATA_HORKAGE_NODMA },
 	{ "Toshiba CD-ROM XM-6202B", NULL,	ATA_HORKAGE_NODMA },
 	{ "TOSHIBA CD-ROM XM-1702BC", NULL,	ATA_HORKAGE_NODMA },
 	{ "CD-532E-A", 		NULL,		ATA_HORKAGE_NODMA },
@@ -4211,70 +4207,16 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "OCZ CORE_SSD",	"02.10104",	ATA_HORKAGE_NONCQ },
 
 	/* Seagate NCQ + FLUSH CACHE firmware bug */
-	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-
-	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-
-	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST31000333AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST3640[36]23AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
@@ -4303,12 +4245,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Devices which get the IVB wrong */
 	{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
 	/* Maybe we should just blacklist TSSTcorp... */
-	{ "TSSTcorp CDDVDW SH-S202H", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202H", "SB01",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202J", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202J", "SB01",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202N", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202N", "SB01",	  ATA_HORKAGE_IVB, },
+	{ "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]",  ATA_HORKAGE_IVB, },
 
 	/* Devices that do not need bridging limits applied */
 	{ "MTRON MSP-SATA*",		NULL,	ATA_HORKAGE_BRIDGE_OK, },
@@ -4326,29 +4263,73 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ }
 };
 
-static int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
+/**
+ *	glob_match - match a text string against a glob-style pattern
+ *	@text: the string to be examined
+ *	@pattern: the glob-style pattern to be matched against
+ *
+ *	Either/both of text and pattern can be empty strings.
+ *
+ *	Match text against a glob-style pattern, with wildcards and simple sets:
+ *
+ *		?	matches any single character.
+ *		*	matches any run of characters.
+ *		[xyz]	matches a single character from the set: x, y, or z.
+ *		[a-d]	matches a single character from the range: a, b, c, or d.
+ *		[a-d0-9] matches a single character from either range.
+ *
+ *	The special characters ?, [, -, or *, can be matched using a set, eg. [*]
+ *	Behaviour with malformed patterns is undefined, though generally reasonable.
+ *
+ *	Example patterns:  "SD1?",  "SD1[0-5]",  "*R0",  SD*1?[012]*xx"
+ *
+ *	This function uses one level of recursion per '*' in pattern.
+ *	Since it calls _nothing_ else, and has _no_ explicit local variables,
+ *	this will not cause stack problems for any reasonable use here.
+ *
+ *	RETURNS:
+ *	0 on match, 1 otherwise.
+ */
+static int glob_match (const char *text, const char *pattern)
 {
-	const char *p;
-	int len;
-
-	/*
-	 * check for trailing wildcard: *\0
-	 */
-	p = strchr(patt, wildchar);
-	if (p && ((*(p + 1)) == 0))
-		len = p - patt;
-	else {
-		len = strlen(name);
-		if (!len) {
-			if (!*patt)
-				return 0;
-			return -1;
+	do {
+		/* Match single character or a '?' wildcard */
+		if (*text == *pattern || *pattern == '?') {
+			if (!*pattern++)
+				return 0;  /* End of both strings: match */
+		} else {
+			/* Match single char against a '[' bracketed ']' pattern set */
+			if (!*text || *pattern != '[')
+				break;  /* Not a pattern set */
+			while (*++pattern && *pattern != ']' && *text != *pattern) {
+				if (*pattern == '-' && *(pattern - 1) != '[')
+					if (*text > *(pattern - 1) && *text < *(pattern + 1)) {
+						++pattern;
+						break;
+					}
+			}
+			if (!*pattern || *pattern == ']')
+				return 1;  /* No match */
+			while (*pattern && *pattern++ != ']');
+		}
+	} while (*++text && *pattern);
+
+	/* Match any run of chars against a '*' wildcard */
+	if (*pattern == '*') {
+		if (!*++pattern)
+			return 0;  /* Match: avoid recursion at end of pattern */
+		/* Loop to handle additional pattern chars after the wildcard */
+		while (*text) {
+			if (glob_match(text, pattern) == 0)
+				return 0;  /* Remainder matched */
+			++text;  /* Absorb (match) this char and try again */
 		}
 	}
-
-	return strncmp(patt, name, len);
+	if (!*text && !*pattern)
+		return 0;  /* End of both strings: match */
+	return 1;  /* No match */
 }
-
+ 
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
@@ -4359,10 +4340,10 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 	ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
 
 	while (ad->model_num) {
-		if (!strn_pattern_cmp(ad->model_num, model_num, '*')) {
+		if (!glob_match(model_num, ad->model_num)) {
 			if (ad->model_rev == NULL)
 				return ad->horkage;
-			if (!strn_pattern_cmp(ad->model_rev, model_rev, '*'))
+			if (!glob_match(model_rev, ad->model_rev))
 				return ad->horkage;
 		}
 		ad++;
@@ -5611,6 +5592,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
 #endif
 
+	mutex_init(&ap->scsi_scan_mutex);
 	INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
 	INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
 	INIT_LIST_HEAD(&ap->eh_done_q);
@@ -6549,29 +6531,20 @@ static int __init ata_init(void)
 
 	ata_parse_force_param();
 
-	ata_aux_wq = create_singlethread_workqueue("ata_aux");
-	if (!ata_aux_wq)
-		goto fail;
-
 	rc = ata_sff_init();
-	if (rc)
-		goto fail;
+	if (rc) {
+		kfree(ata_force_tbl);
+		return rc;
+	}
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
-
-fail:
-	kfree(ata_force_tbl);
-	if (ata_aux_wq)
-		destroy_workqueue(ata_aux_wq);
-	return rc;
 }
 
 static void __exit ata_exit(void)
 {
 	ata_sff_exit();
 	kfree(ata_force_tbl);
-	destroy_workqueue(ata_aux_wq);
 }
 
 subsys_initcall(ata_init);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f77a67303f8..c9ae299b834 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -727,7 +727,7 @@ void ata_scsi_error(struct Scsi_Host *host)
 	if (ap->pflags & ATA_PFLAG_LOADING)
 		ap->pflags &= ~ATA_PFLAG_LOADING;
 	else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG)
-		queue_delayed_work(ata_aux_wq, &ap->hotplug_task, 0);
+		schedule_delayed_work(&ap->hotplug_task, 0);
 
 	if (ap->pflags & ATA_PFLAG_RECOVERED)
 		ata_port_printk(ap, KERN_INFO, "EH complete\n");
@@ -2214,6 +2214,7 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_SMART,		"SMART" },
 		{ ATA_CMD_MEDIA_LOCK,		"DOOR LOCK" },
 		{ ATA_CMD_MEDIA_UNLOCK,		"DOOR UNLOCK" },
+		{ ATA_CMD_DSM,			"DATA SET MANAGEMENT" },
 		{ ATA_CMD_CHK_MED_CRD_TYP, 	"CHECK MEDIA CARD TYPE" },
 		{ ATA_CMD_CFA_REQ_EXT_ERR, 	"CFA REQUEST EXTENDED ERROR" },
 		{ ATA_CMD_CFA_WRITE_NE,		"CFA WRITE SECTORS WITHOUT ERASE" },
@@ -2944,7 +2945,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 			ehc->i.flags |= ATA_EHI_SETMODE;
 
 			/* schedule the scsi_rescan_device() here */
-			queue_work(ata_aux_wq, &(ap->scsi_rescan_task));
+			schedule_work(&(ap->scsi_rescan_task));
 		} else if (dev->class == ATA_DEV_UNKNOWN &&
 			   ehc->tries[dev->devno] &&
 			   ata_class_enabled(ehc->classes[dev->devno])) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a54273d2c3c..d75c9c479d1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3435,7 +3435,7 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
 				"                  switching to async\n");
 	}
 
-	queue_delayed_work(ata_aux_wq, &ap->hotplug_task,
+	queue_delayed_work(system_long_wq, &ap->hotplug_task,
 			   round_jiffies_relative(HZ));
 }
 
@@ -3582,6 +3582,7 @@ void ata_scsi_hotplug(struct work_struct *work)
 	}
 
 	DPRINTK("ENTER\n");
+	mutex_lock(&ap->scsi_scan_mutex);
 
 	/* Unplug detached devices.  We cannot use link iterator here
 	 * because PMP links have to be scanned even if PMP is
@@ -3595,6 +3596,7 @@ void ata_scsi_hotplug(struct work_struct *work)
 	/* scan for new ones */
 	ata_scsi_scan_host(ap, 0);
 
+	mutex_unlock(&ap->scsi_scan_mutex);
 	DPRINTK("EXIT\n");
 }
 
@@ -3673,9 +3675,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
  *	@work: Pointer to ATA port to perform scsi_rescan_device()
  *
  *	After ATA pass thru (SAT) commands are executed successfully,
- *	libata need to propagate the changes to SCSI layer.  This
- *	function must be executed from ata_aux_wq such that sdev
- *	attach/detach don't race with rescan.
+ *	libata need to propagate the changes to SCSI layer.
  *
  *	LOCKING:
  *	Kernel thread context (may sleep).
@@ -3688,6 +3688,7 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 	struct ata_device *dev;
 	unsigned long flags;
 
+	mutex_lock(&ap->scsi_scan_mutex);
 	spin_lock_irqsave(ap->lock, flags);
 
 	ata_for_each_link(link, ap, EDGE) {
@@ -3707,6 +3708,7 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 	}
 
 	spin_unlock_irqrestore(ap->lock, flags);
+	mutex_unlock(&ap->scsi_scan_mutex);
 }
 
 /**
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index efa4a18cfb9..674c1436491 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3318,14 +3318,7 @@ void ata_sff_port_init(struct ata_port *ap)
 
 int __init ata_sff_init(void)
 {
-	/*
-	 * FIXME: In UP case, there is only one workqueue thread and if you
-	 * have more than one PIO device, latency is bloody awful, with
-	 * occasional multi-second "hiccups" as one PIO device waits for
-	 * another.  It's an ugly wart that users DO occasionally complain
-	 * about; luckily most users have at most one PIO polled device.
-	 */
-	ata_sff_wq = create_workqueue("ata_sff");
+	ata_sff_wq = alloc_workqueue("ata_sff", WQ_RESCUER, WQ_MAX_ACTIVE);
 	if (!ata_sff_wq)
 		return -ENOMEM;
 
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 4b84ed60324..9ce1ecc63e3 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -54,7 +54,6 @@ enum {
 };
 
 extern unsigned int ata_print_id;
-extern struct workqueue_struct *ata_aux_wq;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 118c28e8aba..e944aa0c551 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -34,7 +34,6 @@
 #include <linux/ata.h>
 #include <linux/libata.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -201,23 +200,25 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->io.BasePort1 = io->win[0].base;
-		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		pdev->resource[0]->start = io->win[0].base;
+		if (!(io->flags & CISTPL_IO_16BIT)) {
+			pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+			pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+		}
 		if (io->nwin == 2) {
-			pdev->io.NumPorts1 = 8;
-			pdev->io.BasePort2 = io->win[1].base;
-			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
+			pdev->resource[0]->end = 8;
+			pdev->resource[1]->start = io->win[1].base;
+			pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+			if (pcmcia_request_io(pdev) != 0)
 				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort2;
+			stk->ctl_base = pdev->resource[1]->start;
 		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->io.NumPorts1 = io->win[0].len;
-			pdev->io.NumPorts2 = 0;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
+			pdev->resource[0]->end = io->win[0].len;
+			pdev->resource[1]->end = 0;
+			if (pcmcia_request_io(pdev) != 0)
 				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+			stk->ctl_base = pdev->resource[0]->start + 0x0e;
 		} else
 			return -ENODEV;
 		/* If we've got this far, we're done */
@@ -246,9 +247,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	struct ata_port_operations *ops = &pcmcia_port_ops;
 
 	/* Set up attributes in order to probe card and get resources */
-	pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	pdev->io.IOAddrLines = 3;
+	pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	pdev->conf.Attributes = CONF_ENABLE_IRQ;
 	pdev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -271,7 +271,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
 			goto failed; /* No suitable config found */
 	}
-	io_base = pdev->io.BasePort1;
+	io_base = pdev->resource[0]->start;
 	ctl_base = stk->ctl_base;
 	if (!pdev->irq)
 		goto failed;
@@ -294,7 +294,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 
 	/* FIXME: Could be more ports at base + 0x10 but we only deal with
 	   one right now */
-	if (pdev->io.NumPorts1 >= 0x20)
+	if (resource_size(pdev->resource[0]) >= 0x20)
 		n_ports = 2;
 
 	if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
new file mode 100644
index 00000000000..6f9cfb24b75
--- /dev/null
+++ b/drivers/ata/pata_samsung_cf.c
@@ -0,0 +1,683 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * PATA driver for Samsung SoCs.
+ * Supports CF Interface in True IDE mode. Currently only PIO mode has been
+ * implemented; UDMA support has to be added.
+ *
+ * Based on:
+ *	PATA driver for AT91SAM9260 Static Memory Controller
+ *	PATA driver for Toshiba SCC controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <plat/ata.h>
+#include <plat/regs-ata.h>
+
+#define DRV_NAME "pata_samsung_cf"
+#define DRV_VERSION "0.1"
+
+enum s3c_cpu_type {
+	TYPE_S3C64XX,
+	TYPE_S5PC100,
+	TYPE_S5PV210,
+};
+
+/*
+ * struct s3c_ide_info - S3C PATA instance.
+ * @clk: The clock resource for this controller.
+ * @ide_addr: The area mapped for the hardware registers.
+ * @sfr_addr: The area mapped for the special function registers.
+ * @irq: The IRQ number we are using.
+ * @cpu_type: The exact type of this controller.
+ * @fifo_status_reg: The ATA_FIFO_STATUS register offset.
+ */
+struct s3c_ide_info {
+	struct clk *clk;
+	void __iomem *ide_addr;
+	void __iomem *sfr_addr;
+	unsigned int irq;
+	enum s3c_cpu_type cpu_type;
+	unsigned int fifo_status_reg;
+};
+
+static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode)
+{
+	u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG);
+	reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP);
+	writel(reg, s3c_ide_regbase + S3C_ATA_CFG);
+}
+
+static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase)
+{
+	/* Select true-ide as the internal operating mode */
+	writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE,
+		s3c_ide_sfrbase + S3C_CFATA_MUX);
+}
+
+static unsigned long
+pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata)
+{
+	int t1 = ata->setup;
+	int t2 = ata->act8b;
+	int t2i = ata->rec8b;
+	ulong piotime;
+
+	piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf);
+
+	return piotime;
+}
+
+static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct s3c_ide_info *info = ap->host->private_data;
+	struct ata_timing timing;
+	int cycle_time;
+	ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG);
+	ulong piotime;
+
+	/* Enables IORDY if mode requires it */
+	if (ata_pio_need_iordy(adev))
+		ata_cfg |= S3C_ATA_CFG_IORDYEN;
+	else
+		ata_cfg &= ~S3C_ATA_CFG_IORDYEN;
+
+	cycle_time = (int)(1000000000UL / clk_get_rate(info->clk));
+
+	ata_timing_compute(adev, adev->pio_mode, &timing,
+					cycle_time * 1000, 0);
+
+	piotime = pata_s3c_setup_timing(info, &timing);
+
+	writel(ata_cfg, info->ide_addr + S3C_ATA_CFG);
+	writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME);
+}
+
+/*
+ * Waits until the IDE controller is able to perform next read/write
+ * operation to the disk. Needed for 64XX series boards only.
+ */
+static int wait_for_host_ready(struct s3c_ide_info *info)
+{
+	ulong timeout;
+	void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg;
+
+	/* wait for maximum of 20 msec */
+	timeout = jiffies + msecs_to_jiffies(20);
+	while (time_before(jiffies, timeout)) {
+		if ((readl(fifo_reg) >> 28) == 0)
+			return 0;
+	}
+	return -EBUSY;
+}
+
+/*
+ * Writes to one of the task file registers.
+ */
+static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg)
+{
+	struct s3c_ide_info *info = host->private_data;
+
+	wait_for_host_ready(info);
+	writeb(addr, reg);
+}
+
+/*
+ * Reads from one of the task file registers.
+ */
+static u8 ata_inb(struct ata_host *host, void __iomem *reg)
+{
+	struct s3c_ide_info *info = host->private_data;
+	u8 temp;
+
+	wait_for_host_ready(info);
+	(void) readb(reg);
+	wait_for_host_ready(info);
+	temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA);
+	return temp;
+}
+
+/*
+ * pata_s3c_tf_load - send taskfile registers to host controller
+ */
+static void pata_s3c_tf_load(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr);
+		ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr);
+		ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr);
+		ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr);
+		ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr);
+	}
+
+	if (is_addr) {
+		ata_outb(ap->host, tf->feature, ioaddr->feature_addr);
+		ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr);
+		ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr);
+		ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr);
+		ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE)
+		ata_outb(ap->host, tf->device, ioaddr->device_addr);
+
+	ata_wait_idle(ap);
+}
+
+/*
+ * pata_s3c_tf_read - input device's ATA taskfile shadow registers
+ */
+static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	tf->feature = ata_inb(ap->host, ioaddr->error_addr);
+	tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+	tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+	tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr);
+	tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr);
+	tf->device = ata_inb(ap->host, ioaddr->device_addr);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+		tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr);
+		tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+		tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+		tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr);
+		tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr);
+		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+	}
+}
+
+/*
+ * pata_s3c_exec_command - issue ATA command to host controller
+ */
+static void pata_s3c_exec_command(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	ata_outb(ap->host, tf->command, ap->ioaddr.command_addr);
+	ata_sff_pause(ap);
+}
+
+/*
+ * pata_s3c_check_status - Read device status register
+ */
+static u8 pata_s3c_check_status(struct ata_port *ap)
+{
+	return ata_inb(ap->host, ap->ioaddr.status_addr);
+}
+
+/*
+ * pata_s3c_check_altstatus - Read alternate device status register
+ */
+static u8 pata_s3c_check_altstatus(struct ata_port *ap)
+{
+	return ata_inb(ap->host, ap->ioaddr.altstatus_addr);
+}
+
+/*
+ * pata_s3c_data_xfer - Transfer data by PIO
+ */
+unsigned int pata_s3c_data_xfer(struct ata_device *dev, unsigned char *buf,
+				unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+	struct s3c_ide_info *info = ap->host->private_data;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1, i;
+	u16 *data_ptr = (u16 *)buf;
+
+	/* Requires wait same as in ata_inb/ata_outb */
+	if (rw == READ)
+		for (i = 0; i < words; i++, data_ptr++) {
+			wait_for_host_ready(info);
+			(void) readw(data_addr);
+			wait_for_host_ready(info);
+			*data_ptr = readw(info->ide_addr
+					+ S3C_ATA_PIO_RDATA);
+		}
+	else
+		for (i = 0; i < words; i++, data_ptr++) {
+			wait_for_host_ready(info);
+			writew(*data_ptr, data_addr);
+		}
+
+	if (buflen & 0x01)
+		dev_err(ap->dev, "unexpected trailing data\n");
+
+	return words << 1;
+}
+
+/*
+ * pata_s3c_dev_select - Select device on ATA bus
+ */
+static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device)
+{
+	u8 tmp = ATA_DEVICE_OBS;
+
+	if (device != 0)
+		tmp |= ATA_DEV1;
+
+	ata_outb(ap->host, tmp, ap->ioaddr.device_addr);
+	ata_sff_pause(ap);
+}
+
+/*
+ * pata_s3c_devchk - PATA device presence detection
+ */
+static unsigned int pata_s3c_devchk(struct ata_port *ap,
+				unsigned int device)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 nsect, lbal;
+
+	pata_s3c_dev_select(ap, device);
+
+	ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
+
+	ata_outb(ap->host, 0xaa, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0x55, ioaddr->lbal_addr);
+
+	ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
+
+	nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+	lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+
+	return 0;		/* nothing found */
+}
+
+/*
+ * pata_s3c_wait_after_reset - wait for devices to become ready after reset
+ */
+static int pata_s3c_wait_after_reset(struct ata_link *link,
+		unsigned long deadline)
+{
+	int rc;
+
+	msleep(ATA_WAIT_AFTER_RESET);
+
+	/* always check readiness of the master device */
+	rc = ata_sff_wait_ready(link, deadline);
+	/* -ENODEV means the odd clown forgot the D7 pulldown resistor
+	 * and TF status is 0xff, bail out on it too.
+	 */
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+/*
+ * pata_s3c_bus_softreset - PATA device software reset
+ */
+static unsigned int pata_s3c_bus_softreset(struct ata_port *ap,
+		unsigned long deadline)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	/* software reset.  causes dev0 to be selected */
+	ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
+	udelay(20);
+	ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+	udelay(20);
+	ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
+	ap->last_ctl = ap->ctl;
+
+	return pata_s3c_wait_after_reset(&ap->link, deadline);
+}
+
+/*
+ * pata_s3c_softreset - reset host port via ATA SRST
+ */
+static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes,
+			 unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	unsigned int devmask = 0;
+	int rc;
+	u8 err;
+
+	/* determine if device 0 is present */
+	if (pata_s3c_devchk(ap, 0))
+		devmask |= (1 << 0);
+
+	/* select device 0 again */
+	pata_s3c_dev_select(ap, 0);
+
+	/* issue bus reset */
+	rc = pata_s3c_bus_softreset(ap, deadline);
+	/* if link is occupied, -ENODEV too is an error */
+	if (rc && rc != -ENODEV) {
+		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+		return rc;
+	}
+
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_sff_dev_classify(&ap->link.device[0],
+					  devmask & (1 << 0), &err);
+
+	return 0;
+}
+
+/*
+ * pata_s3c_set_devctl - Write device control register
+ */
+static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl)
+{
+	ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr);
+}
+
+static struct scsi_host_template pata_s3c_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_s3c_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_check_status	= pata_s3c_check_status,
+	.sff_check_altstatus    = pata_s3c_check_altstatus,
+	.sff_tf_load		= pata_s3c_tf_load,
+	.sff_tf_read		= pata_s3c_tf_read,
+	.sff_data_xfer		= pata_s3c_data_xfer,
+	.sff_exec_command	= pata_s3c_exec_command,
+	.sff_dev_select         = pata_s3c_dev_select,
+	.sff_set_devctl         = pata_s3c_set_devctl,
+	.softreset		= pata_s3c_softreset,
+	.set_piomode		= pata_s3c_set_piomode,
+};
+
+static struct ata_port_operations pata_s5p_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.set_piomode		= pata_s3c_set_piomode,
+};
+
+static void pata_s3c_enable(void *s3c_ide_regbase, bool state)
+{
+	u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL);
+	temp = state ? (temp | 1) : (temp & ~1);
+	writel(temp, s3c_ide_regbase + S3C_ATA_CTRL);
+}
+
+static irqreturn_t pata_s3c_irq(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct s3c_ide_info *info = host->private_data;
+	u32 reg;
+
+	reg = readl(info->ide_addr + S3C_ATA_IRQ);
+	writel(reg, info->ide_addr + S3C_ATA_IRQ);
+
+	return ata_sff_interrupt(irq, dev_instance);
+}
+
+static void pata_s3c_hwinit(struct s3c_ide_info *info,
+				struct s3c_ide_platdata *pdata)
+{
+	switch (info->cpu_type) {
+	case TYPE_S3C64XX:
+		/* Configure as big endian */
+		pata_s3c_cfg_mode(info->sfr_addr);
+		pata_s3c_set_endian(info->ide_addr, 1);
+		pata_s3c_enable(info->ide_addr, true);
+		msleep(100);
+
+		/* Remove IRQ Status */
+		writel(0x1f, info->ide_addr + S3C_ATA_IRQ);
+		writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK);
+		break;
+
+	case TYPE_S5PC100:
+		pata_s3c_cfg_mode(info->sfr_addr);
+		/* FALLTHROUGH */
+
+	case TYPE_S5PV210:
+		/* Configure as little endian */
+		pata_s3c_set_endian(info->ide_addr, 0);
+		pata_s3c_enable(info->ide_addr, true);
+		msleep(100);
+
+		/* Remove IRQ Status */
+		writel(0x3f, info->ide_addr + S3C_ATA_IRQ);
+		writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static int __init pata_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct s3c_ide_info *info;
+	struct resource *res;
+	struct ata_port *ap;
+	struct ata_host *host;
+	enum s3c_cpu_type cpu_type;
+	int ret;
+
+	cpu_type = platform_get_device_id(pdev)->driver_data;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(dev, "failed to allocate memory for device data\n");
+		return -ENOMEM;
+	}
+
+	info->irq = platform_get_irq(pdev, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "failed to get mem resource\n");
+		return -EINVAL;
+	}
+
+	if (!devm_request_mem_region(dev, res->start,
+				resource_size(res), DRV_NAME)) {
+		dev_err(dev, "error requesting register region\n");
+		return -EBUSY;
+	}
+
+	info->ide_addr = devm_ioremap(dev, res->start, resource_size(res));
+	if (!info->ide_addr) {
+		dev_err(dev, "failed to map IO base address\n");
+		return -ENOMEM;
+	}
+
+	info->clk = clk_get(&pdev->dev, "cfcon");
+	if (IS_ERR(info->clk)) {
+		dev_err(dev, "failed to get access to cf controller clock\n");
+		ret = PTR_ERR(info->clk);
+		info->clk = NULL;
+		return ret;
+	}
+
+	clk_enable(info->clk);
+
+	/* init ata host */
+	host = ata_host_alloc(dev, 1);
+	if (!host) {
+		dev_err(dev, "failed to allocate ide host\n");
+		ret = -ENOMEM;
+		goto stop_clk;
+	}
+
+	ap = host->ports[0];
+	ap->flags |= ATA_FLAG_MMIO;
+	ap->pio_mask = ATA_PIO4;
+
+	if (cpu_type == TYPE_S3C64XX) {
+		ap->ops = &pata_s3c_port_ops;
+		info->sfr_addr = info->ide_addr + 0x1800;
+		info->ide_addr += 0x1900;
+		info->fifo_status_reg = 0x94;
+	} else if (cpu_type == TYPE_S5PC100) {
+		ap->ops = &pata_s5p_port_ops;
+		info->sfr_addr = info->ide_addr + 0x1800;
+		info->ide_addr += 0x1900;
+		info->fifo_status_reg = 0x84;
+	} else {
+		ap->ops = &pata_s5p_port_ops;
+		info->fifo_status_reg = 0x84;
+	}
+
+	info->cpu_type = cpu_type;
+
+	if (info->irq <= 0) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		info->irq = 0;
+		ata_port_desc(ap, "no IRQ, using PIO polling\n");
+	}
+
+	ap->ioaddr.cmd_addr =  info->ide_addr + S3C_ATA_CMD;
+	ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR;
+	ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED;
+	ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED;
+	ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR;
+	ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR;
+	ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR;
+	ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR;
+	ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR;
+	ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD;
+	ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD;
+	ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD;
+	ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD;
+
+	ata_port_desc(ap, "mmio cmd 0x%llx ",
+			(unsigned long long)res->start);
+
+	host->private_data = info;
+
+	if (pdata && pdata->setup_gpio)
+		pdata->setup_gpio();
+
+	/* Set endianness and enable the interface */
+	pata_s3c_hwinit(info, pdata);
+
+	platform_set_drvdata(pdev, host);
+
+	return ata_host_activate(host, info->irq,
+			info->irq ? pata_s3c_irq : NULL,
+			0, &pata_s3c_sht);
+
+stop_clk:
+	clk_disable(info->clk);
+	clk_put(info->clk);
+	return ret;
+}
+
+static int __exit pata_s3c_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct s3c_ide_info *info = host->private_data;
+
+	ata_host_detach(host);
+
+	clk_disable(info->clk);
+	clk_put(info->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pata_s3c_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
+
+	return ata_host_suspend(host, PMSG_SUSPEND);
+}
+
+static int pata_s3c_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+	struct s3c_ide_info *info = host->private_data;
+
+	pata_s3c_hwinit(info, pdata);
+	ata_host_resume(host);
+
+	return 0;
+}
+
+static const struct dev_pm_ops pata_s3c_pm_ops = {
+	.suspend	= pata_s3c_suspend,
+	.resume		= pata_s3c_resume,
+};
+#endif
+
+/* driver device registration */
+static struct platform_device_id pata_s3c_driver_ids[] = {
+	{
+		.name		= "s3c64xx-pata",
+		.driver_data	= TYPE_S3C64XX,
+	}, {
+		.name		= "s5pc100-pata",
+		.driver_data	= TYPE_S5PC100,
+	}, {
+		.name		= "s5pv210-pata",
+		.driver_data	= TYPE_S5PV210,
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids);
+
+static struct platform_driver pata_s3c_driver = {
+	.remove		= __exit_p(pata_s3c_remove),
+	.id_table	= pata_s3c_driver_ids,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pata_s3c_pm_ops,
+#endif
+	},
+};
+
+static int __init pata_s3c_init(void)
+{
+	return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
+}
+
+static void __exit pata_s3c_exit(void)
+{
+	platform_driver_unregister(&pata_s3c_driver);
+}
+
+module_init(pata_s3c_init);
+module_exit(pata_s3c_exit);
+
+MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
+MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index d9db3f8d60e..fe36966f7e3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -168,8 +168,7 @@ static const unsigned long JCACTSELtbl[2][7] = {
 };
 
 static const struct pci_device_id scc_pci_tbl[] = {
-	{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
new file mode 100644
index 00000000000..ea24c1e51be
--- /dev/null
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -0,0 +1,1756 @@
+/*
+ * drivers/ata/sata_dwc_460ex.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ *          Copyright 2006 Applied Micro Circuits Corporation
+ *          COPYRIGHT (C) 2005  SYNOPSYS, INC.  ALL RIGHTS RESERVED
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef CONFIG_SATA_DWC_DEBUG
+#define DEBUG
+#endif
+
+#ifdef CONFIG_SATA_DWC_VDEBUG
+#define VERBOSE_DEBUG
+#define DEBUG_NCQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/slab.h>
+#include "libata.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+
+#define DRV_NAME        "sata-dwc"
+#define DRV_VERSION     "1.0"
+
+/* SATA DMA driver Globals */
+#define DMA_NUM_CHANS		1
+#define DMA_NUM_CHAN_REGS	8
+
+/* SATA DMA Register definitions */
+#define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length*/
+
+struct dmareg {
+	u32 low;		/* Low bits 0-31 */
+	u32 high;		/* High bits 32-63 */
+};
+
+/* DMA Per Channel registers */
+struct dma_chan_regs {
+	struct dmareg sar;	/* Source Address */
+	struct dmareg dar;	/* Destination address */
+	struct dmareg llp;	/* Linked List Pointer */
+	struct dmareg ctl;	/* Control */
+	struct dmareg sstat;	/* Source Status not implemented in core */
+	struct dmareg dstat;	/* Destination Status not implemented in core*/
+	struct dmareg sstatar;	/* Source Status Address not impl in core */
+	struct dmareg dstatar;	/* Destination Status Address not implemente */
+	struct dmareg cfg;	/* Config */
+	struct dmareg sgr;	/* Source Gather */
+	struct dmareg dsr;	/* Destination Scatter */
+};
+
+/* Generic Interrupt Registers */
+struct dma_interrupt_regs {
+	struct dmareg tfr;	/* Transfer Interrupt */
+	struct dmareg block;	/* Block Interrupt */
+	struct dmareg srctran;	/* Source Transfer Interrupt */
+	struct dmareg dsttran;	/* Dest Transfer Interrupt */
+	struct dmareg error;	/* Error */
+};
+
+struct ahb_dma_regs {
+	struct dma_chan_regs	chan_regs[DMA_NUM_CHAN_REGS];
+	struct dma_interrupt_regs interrupt_raw;	/* Raw Interrupt */
+	struct dma_interrupt_regs interrupt_status;	/* Interrupt Status */
+	struct dma_interrupt_regs interrupt_mask;	/* Interrupt Mask */
+	struct dma_interrupt_regs interrupt_clear;	/* Interrupt Clear */
+	struct dmareg		statusInt;	/* Interrupt combined*/
+	struct dmareg		rq_srcreg;	/* Src Trans Req */
+	struct dmareg		rq_dstreg;	/* Dst Trans Req */
+	struct dmareg		rq_sgl_srcreg;	/* Sngl Src Trans Req*/
+	struct dmareg		rq_sgl_dstreg;	/* Sngl Dst Trans Req*/
+	struct dmareg		rq_lst_srcreg;	/* Last Src Trans Req*/
+	struct dmareg		rq_lst_dstreg;	/* Last Dst Trans Req*/
+	struct dmareg		dma_cfg;		/* DMA Config */
+	struct dmareg		dma_chan_en;		/* DMA Channel Enable*/
+	struct dmareg		dma_id;			/* DMA ID */
+	struct dmareg		dma_test;		/* DMA Test */
+	struct dmareg		res1;			/* reserved */
+	struct dmareg		res2;			/* reserved */
+	/*
+	 * DMA Comp Params
+	 * Param 6 = dma_param[0], Param 5 = dma_param[1],
+	 * Param 4 = dma_param[2] ...
+	 */
+	struct dmareg		dma_params[6];
+};
+
+/* Data structure for linked list item */
+struct lli {
+	u32		sar;		/* Source Address */
+	u32		dar;		/* Destination address */
+	u32		llp;		/* Linked List Pointer */
+	struct dmareg	ctl;		/* Control */
+	struct dmareg	dstat;		/* Destination Status */
+};
+
+enum {
+	SATA_DWC_DMAC_LLI_SZ =	(sizeof(struct lli)),
+	SATA_DWC_DMAC_LLI_NUM =	256,
+	SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
+					SATA_DWC_DMAC_LLI_NUM),
+	SATA_DWC_DMAC_TWIDTH_BYTES = 4,
+	SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
+						SATA_DWC_DMAC_TWIDTH_BYTES),
+};
+
+/* DMA Register Operation Bits */
+enum {
+	DMA_EN	=		0x00000001, /* Enable AHB DMA */
+	DMA_CTL_LLP_SRCEN =	0x10000000, /* Blk chain enable Src */
+	DMA_CTL_LLP_DSTEN =	0x08000000, /* Blk chain enable Dst */
+};
+
+#define	DMA_CTL_BLK_TS(size)	((size) & 0x000000FFF)	/* Blk Transfer size */
+#define DMA_CHANNEL(ch)		(0x00000001 << (ch))	/* Select channel */
+	/* Enable channel */
+#define	DMA_ENABLE_CHAN(ch)	((0x00000001 << (ch)) |			\
+				 ((0x000000001 << (ch)) << 8))
+	/* Disable channel */
+#define	DMA_DISABLE_CHAN(ch)	(0x00000000 | ((0x000000001 << (ch)) << 8))
+	/* Transfer Type & Flow Controller */
+#define	DMA_CTL_TTFC(type)	(((type) & 0x7) << 20)
+#define	DMA_CTL_SMS(num)	(((num) & 0x3) << 25) /* Src Master Select */
+#define	DMA_CTL_DMS(num)	(((num) & 0x3) << 23)/* Dst Master Select */
+	/* Src Burst Transaction Length */
+#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
+	/* Dst Burst Transaction Length */
+#define	DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
+	/* Source Transfer Width */
+#define	DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
+	/* Destination Transfer Width */
+#define	DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
+
+/* Assign HW handshaking interface (x) to destination / source peripheral */
+#define	DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
+#define	DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
+#define	DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
+
+/*
+ * This define is used to set block chaining disabled in the control low
+ * register.  It is already in little endian format so it can be &'d dirctly.
+ * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
+ */
+enum {
+	DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
+	DMA_CTL_TTFC_P2M_DMAC =	0x00000002, /* Per to mem, DMAC cntr */
+	DMA_CTL_TTFC_M2P_PER =	0x00000003, /* Mem to per, peripheral cntr */
+	DMA_CTL_SINC_INC =	0x00000000, /* Source Address Increment */
+	DMA_CTL_SINC_DEC =	0x00000200,
+	DMA_CTL_SINC_NOCHANGE =	0x00000400,
+	DMA_CTL_DINC_INC =	0x00000000, /* Destination Address Increment */
+	DMA_CTL_DINC_DEC =	0x00000080,
+	DMA_CTL_DINC_NOCHANGE =	0x00000100,
+	DMA_CTL_INT_EN =	0x00000001, /* Interrupt Enable */
+
+/* Channel Configuration Register high bits */
+	DMA_CFG_FCMOD_REQ =	0x00000001, /* Flow Control - request based */
+	DMA_CFG_PROTCTL	=	(0x00000003 << 2),/* Protection Control */
+
+/* Channel Configuration Register low bits */
+	DMA_CFG_RELD_DST =	0x80000000, /* Reload Dest / Src Addr */
+	DMA_CFG_RELD_SRC =	0x40000000,
+	DMA_CFG_HS_SELSRC =	0x00000800, /* Software handshake Src/ Dest */
+	DMA_CFG_HS_SELDST =	0x00000400,
+	DMA_CFG_FIFOEMPTY =     (0x00000001 << 9), /* FIFO Empty bit */
+
+/* Channel Linked List Pointer Register */
+	DMA_LLP_AHBMASTER1 =	0,	/* List Master Select */
+	DMA_LLP_AHBMASTER2 =	1,
+
+	SATA_DWC_MAX_PORTS = 1,
+
+	SATA_DWC_SCR_OFFSET = 0x24,
+	SATA_DWC_REG_OFFSET = 0x64,
+};
+
+/* DWC SATA Registers */
+struct sata_dwc_regs {
+	u32 fptagr;		/* 1st party DMA tag */
+	u32 fpbor;		/* 1st party DMA buffer offset */
+	u32 fptcr;		/* 1st party DMA Xfr count */
+	u32 dmacr;		/* DMA Control */
+	u32 dbtsr;		/* DMA Burst Transac size */
+	u32 intpr;		/* Interrupt Pending */
+	u32 intmr;		/* Interrupt Mask */
+	u32 errmr;		/* Error Mask */
+	u32 llcr;		/* Link Layer Control */
+	u32 phycr;		/* PHY Control */
+	u32 physr;		/* PHY Status */
+	u32 rxbistpd;		/* Recvd BIST pattern def register */
+	u32 rxbistpd1;		/* Recvd BIST data dword1 */
+	u32 rxbistpd2;		/* Recvd BIST pattern data dword2 */
+	u32 txbistpd;		/* Trans BIST pattern def register */
+	u32 txbistpd1;		/* Trans BIST data dword1 */
+	u32 txbistpd2;		/* Trans BIST data dword2 */
+	u32 bistcr;		/* BIST Control Register */
+	u32 bistfctr;		/* BIST FIS Count Register */
+	u32 bistsr;		/* BIST Status Register */
+	u32 bistdecr;		/* BIST Dword Error count register */
+	u32 res[15];		/* Reserved locations */
+	u32 testr;		/* Test Register */
+	u32 versionr;		/* Version Register */
+	u32 idr;		/* ID Register */
+	u32 unimpl[192];	/* Unimplemented */
+	u32 dmadr[256];	/* FIFO Locations in DMA Mode */
+};
+
+enum {
+	SCR_SCONTROL_DET_ENABLE	=	0x00000001,
+	SCR_SSTATUS_DET_PRESENT	=	0x00000001,
+	SCR_SERROR_DIAG_X	=	0x04000000,
+/* DWC SATA Register Operations */
+	SATA_DWC_TXFIFO_DEPTH	=	0x01FF,
+	SATA_DWC_RXFIFO_DEPTH	=	0x01FF,
+	SATA_DWC_DMACR_TMOD_TXCHEN =	0x00000004,
+	SATA_DWC_DMACR_TXCHEN	= (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN),
+	SATA_DWC_DMACR_RXCHEN	= (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN),
+	SATA_DWC_DMACR_TXRXCH_CLEAR =	SATA_DWC_DMACR_TMOD_TXCHEN,
+	SATA_DWC_INTPR_DMAT	=	0x00000001,
+	SATA_DWC_INTPR_NEWFP	=	0x00000002,
+	SATA_DWC_INTPR_PMABRT	=	0x00000004,
+	SATA_DWC_INTPR_ERR	=	0x00000008,
+	SATA_DWC_INTPR_NEWBIST	=	0x00000010,
+	SATA_DWC_INTPR_IPF	=	0x10000000,
+	SATA_DWC_INTMR_DMATM	=	0x00000001,
+	SATA_DWC_INTMR_NEWFPM	=	0x00000002,
+	SATA_DWC_INTMR_PMABRTM	=	0x00000004,
+	SATA_DWC_INTMR_ERRM	=	0x00000008,
+	SATA_DWC_INTMR_NEWBISTM	=	0x00000010,
+	SATA_DWC_LLCR_SCRAMEN	=	0x00000001,
+	SATA_DWC_LLCR_DESCRAMEN	=	0x00000002,
+	SATA_DWC_LLCR_RPDEN	=	0x00000004,
+/* This is all error bits, zero's are reserved fields. */
+	SATA_DWC_SERROR_ERR_BITS =	0x0FFF0F03
+};
+
+#define SATA_DWC_SCR0_SPD_GET(v)	(((v) >> 4) & 0x0000000F)
+#define SATA_DWC_DMACR_TX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_TXCHEN) |\
+						 SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_RX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_RXCHEN) |\
+						 SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DBTSR_MWR(size)	(((size)/4) & SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size)	((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\
+						 << 16)
+struct sata_dwc_device {
+	struct device		*dev;		/* generic device struct */
+	struct ata_probe_ent	*pe;		/* ptr to probe-ent */
+	struct ata_host		*host;
+	u8			*reg_base;
+	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
+	int			irq_dma;
+};
+
+#define SATA_DWC_QCMD_MAX	32
+
+struct sata_dwc_device_port {
+	struct sata_dwc_device	*hsdev;
+	int			cmd_issued[SATA_DWC_QCMD_MAX];
+	struct lli		*llit[SATA_DWC_QCMD_MAX];  /* DMA LLI table */
+	dma_addr_t		llit_dma[SATA_DWC_QCMD_MAX];
+	u32			dma_chan[SATA_DWC_QCMD_MAX];
+	int			dma_pending[SATA_DWC_QCMD_MAX];
+};
+
+/*
+ * Commonly used DWC SATA driver Macros
+ */
+#define HSDEV_FROM_HOST(host)  ((struct sata_dwc_device *)\
+					(host)->private_data)
+#define HSDEV_FROM_AP(ap)  ((struct sata_dwc_device *)\
+					(ap)->host->private_data)
+#define HSDEVP_FROM_AP(ap)   ((struct sata_dwc_device_port *)\
+					(ap)->private_data)
+#define HSDEV_FROM_QC(qc)	((struct sata_dwc_device *)\
+					(qc)->ap->host->private_data)
+#define HSDEV_FROM_HSDEVP(p)	((struct sata_dwc_device *)\
+						(hsdevp)->hsdev)
+
+enum {
+	SATA_DWC_CMD_ISSUED_NOT		= 0,
+	SATA_DWC_CMD_ISSUED_PEND	= 1,
+	SATA_DWC_CMD_ISSUED_EXEC	= 2,
+	SATA_DWC_CMD_ISSUED_NODATA	= 3,
+
+	SATA_DWC_DMA_PENDING_NONE	= 0,
+	SATA_DWC_DMA_PENDING_TX		= 1,
+	SATA_DWC_DMA_PENDING_RX		= 2,
+};
+
+struct sata_dwc_host_priv {
+	void	__iomem	 *scr_addr_sstatus;
+	u32	sata_dwc_sactive_issued ;
+	u32	sata_dwc_sactive_queued ;
+	u32	dma_interrupt_count;
+	struct	ahb_dma_regs	*sata_dma_regs;
+	struct	device	*dwc_dev;
+};
+struct sata_dwc_host_priv host_pvt;
+/*
+ * Prototypes
+ */
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status);
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+static void sata_dwc_port_stop(struct ata_port *ap);
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
+static void dma_dwc_exit(struct sata_dwc_device *hsdev);
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr, int dir);
+static void dma_dwc_xfer_start(int dma_ch);
+
+static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+{
+	dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
+		"0x%lx device: %x\n", tf->command, ata_get_cmd_descript\
+		(tf->protocol), tf->flags, tf->device);
+	dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
+		"lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
+		 tf->lbam, tf->lbah);
+	dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x "
+		"hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
+		tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
+		tf->hob_lbah);
+}
+
+/*
+ * Function: get_burst_length_encode
+ * arguments: datalength: length in bytes of data
+ * returns value to be programmed in register corrresponding to data length
+ * This value is effectively the log(base 2) of the length
+ */
+static  int get_burst_length_encode(int datalength)
+{
+	int items = datalength >> 2;	/* div by 4 to get lword count */
+
+	if (items >= 64)
+		return 5;
+
+	if (items >= 32)
+		return 4;
+
+	if (items >= 16)
+		return 3;
+
+	if (items >= 8)
+		return 2;
+
+	if (items >= 4)
+		return 1;
+
+	return 0;
+}
+
+static  void clear_chan_interrupts(int c)
+{
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
+		 DMA_CHANNEL(c));
+}
+
+/*
+ * Function: dma_request_channel
+ * arguments: None
+ * returns channel number if available else -1
+ * This function assigns the next available DMA channel from the list to the
+ * requester
+ */
+static int dma_request_channel(void)
+{
+	int i;
+
+	for (i = 0; i < DMA_NUM_CHANS; i++) {
+		if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &\
+			DMA_CHANNEL(i)))
+			return i;
+	}
+	dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__,
+		in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)));
+	return -1;
+}
+
+/*
+ * Function: dma_dwc_interrupt
+ * arguments: irq, dev_id, pt_regs
+ * returns channel number if available else -1
+ * Interrupt Handler for DW AHB SATA DMA
+ */
+static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
+{
+	int chan;
+	u32 tfr_reg, err_reg;
+	unsigned long flags;
+	struct sata_dwc_device *hsdev =
+		(struct sata_dwc_device *)hsdev_instance;
+	struct ata_host *host = (struct ata_host *)hsdev->host;
+	struct ata_port *ap;
+	struct sata_dwc_device_port *hsdevp;
+	u8 tag = 0;
+	unsigned int port = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+	tag = ap->link.active_tag;
+
+	tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
+			.low));
+	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
+			.low));
+
+	dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
+		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
+
+	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+		/* Check for end-of-transfer interrupt. */
+		if (tfr_reg & DMA_CHANNEL(chan)) {
+			/*
+			 * Each DMA command produces 2 interrupts.  Only
+			 * complete the command after both interrupts have been
+			 * seen. (See sata_dwc_isr())
+			 */
+			host_pvt.dma_interrupt_count++;
+			sata_dwc_clear_dmacr(hsdevp, tag);
+
+			if (hsdevp->dma_pending[tag] ==
+			    SATA_DWC_DMA_PENDING_NONE) {
+				dev_err(ap->dev, "DMA not pending eot=0x%08x "
+					"err=0x%08x tag=0x%02x pending=%d\n",
+					tfr_reg, err_reg, tag,
+					hsdevp->dma_pending[tag]);
+			}
+
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+
+			/* Clear the interrupt */
+			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+				.tfr.low),
+				 DMA_CHANNEL(chan));
+		}
+
+		/* Check for error interrupt. */
+		if (err_reg & DMA_CHANNEL(chan)) {
+			/* TODO Need error handler ! */
+			dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
+				err_reg);
+
+			/* Clear the interrupt. */
+			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+				.error.low),
+				 DMA_CHANNEL(chan));
+		}
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Function: dma_request_interrupts
+ * arguments: hsdev
+ * returns status
+ * This function registers ISR for a particular DMA channel interrupt
+ */
+static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
+{
+	int retval = 0;
+	int chan;
+
+	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+		/* Unmask error interrupt */
+		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
+			 DMA_ENABLE_CHAN(chan));
+
+		/* Unmask end-of-transfer interrupt */
+		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
+			 DMA_ENABLE_CHAN(chan));
+	}
+
+	retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
+	if (retval) {
+		dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
+		__func__, irq);
+		return -ENODEV;
+	}
+
+	/* Mark this interrupt as requested */
+	hsdev->irq_dma = irq;
+	return 0;
+}
+
+/*
+ * Function: map_sg_to_lli
+ * The Synopsis driver has a comment proposing that better performance
+ * is possible by only enabling interrupts on the last item in the linked list.
+ * However, it seems that could be a problem if an error happened on one of the
+ * first items.  The transfer would halt, but no error interrupt would occur.
+ * Currently this function sets interrupts enabled for each linked list item:
+ * DMA_CTL_INT_EN.
+ */
+static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
+			struct lli *lli, dma_addr_t dma_lli,
+			void __iomem *dmadr_addr, int dir)
+{
+	int i, idx = 0;
+	int fis_len = 0;
+	dma_addr_t next_llp;
+	int bl;
+
+	dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x"
+		" dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
+		(u32)dmadr_addr);
+
+	bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
+
+	for (i = 0; i < num_elems; i++, sg++) {
+		u32 addr, offset;
+		u32 sg_len, len;
+
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
+			"=%d\n", __func__, i, addr, sg_len);
+
+		while (sg_len) {
+			if (idx >= SATA_DWC_DMAC_LLI_NUM) {
+				/* The LLI table is not large enough. */
+				dev_err(host_pvt.dwc_dev, "LLI table overrun "
+				"(idx=%d)\n", idx);
+				break;
+			}
+			len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
+				SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
+
+			offset = addr & 0xffff;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			/*
+			 * Make sure a LLI block is not created that will span
+			 * 8K max FIS boundary.  If the block spans such a FIS
+			 * boundary, there is a chance that a DMA burst will
+			 * cross that boundary -- this results in an error in
+			 * the host controller.
+			 */
+			if (fis_len + len > 8192) {
+				dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
+					"%d(0x%x) len=%d(0x%x)\n", fis_len,
+					 fis_len, len, len);
+				len = 8192 - fis_len;
+				fis_len = 0;
+			} else {
+				fis_len += len;
+			}
+			if (fis_len == 8192)
+				fis_len = 0;
+
+			/*
+			 * Set DMA addresses and lower half of control register
+			 * based on direction.
+			 */
+			if (dir == DMA_FROM_DEVICE) {
+				lli[idx].dar = cpu_to_le32(addr);
+				lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+					DMA_CTL_SMS(0) |
+					DMA_CTL_DMS(1) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_SINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			} else {	/* DMA_TO_DEVICE */
+				lli[idx].sar = cpu_to_le32(addr);
+				lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+					DMA_CTL_SMS(1) |
+					DMA_CTL_DMS(0) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_DINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			}
+
+			dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
+				"0x%08x val: 0x%08x\n", __func__,
+				len, DMA_CTL_BLK_TS(len / 4));
+
+			/* Program the LLI CTL high register */
+			lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
+						(len / 4));
+
+			/* Program the next pointer.  The next pointer must be
+			 * the physical address, not the virtual address.
+			 */
+			next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
+							lli)));
+
+			/* The last 2 bits encode the list master select. */
+			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
+
+			lli[idx].llp = cpu_to_le32(next_llp);
+			idx++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	/*
+	 * The last next ptr has to be zero and the last control low register
+	 * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
+	 * and destination enable) set back to 0 (disabled.) This is what tells
+	 * the core that this is the last item in the linked list.
+	 */
+	if (idx) {
+		lli[idx-1].llp = 0x00000000;
+		lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+
+		/* Flush cache to memory */
+		dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
+			       DMA_BIDIRECTIONAL);
+	}
+
+	return idx;
+}
+
+/*
+ * Function: dma_dwc_xfer_start
+ * arguments: Channel number
+ * Return : None
+ * Enables the DMA channel
+ */
+static void dma_dwc_xfer_start(int dma_ch)
+{
+	/* Enable the DMA channel */
+	out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
+		 in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
+		 DMA_ENABLE_CHAN(dma_ch));
+}
+
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr, int dir)
+{
+	int dma_ch;
+	int num_lli;
+	/* Acquire DMA channel */
+	dma_ch = dma_request_channel();
+	if (dma_ch == -1) {
+		dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+			 __func__);
+		return -EAGAIN;
+	}
+
+	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
+	num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
+
+	dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
+		" 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
+		 lli, (u32)dma_lli, addr, num_lli);
+
+	clear_chan_interrupts(dma_ch);
+
+	/* Program the CFG register. */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
+		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+
+	/* Program the address of the linked list */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
+		 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
+
+	/* Program the CTL register with src enable / dst enable */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
+		 DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
+	return 0;
+}
+
+/*
+ * Function: dma_dwc_exit
+ * arguments: None
+ * returns status
+ * This function exits the SATA DMA driver
+ */
+static void dma_dwc_exit(struct sata_dwc_device *hsdev)
+{
+	dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
+	if (host_pvt.sata_dma_regs)
+		iounmap(host_pvt.sata_dma_regs);
+
+	if (hsdev->irq_dma)
+		free_irq(hsdev->irq_dma, hsdev);
+}
+
+/*
+ * Function: dma_dwc_init
+ * arguments: hsdev
+ * returns status
+ * This function initializes the SATA DMA driver
+ */
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
+{
+	int err;
+
+	err = dma_request_interrupts(hsdev, irq);
+	if (err) {
+		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
+			" %d\n", __func__, err);
+		goto error_out;
+	}
+
+	/* Enabe DMA */
+	out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+
+	dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
+	dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
+		sata_dma_regs);
+
+	return 0;
+
+error_out:
+	dma_dwc_exit(hsdev);
+
+	return err;
+}
+
+static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+	if (scr > SCR_NOTIFICATION) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+			__func__, scr);
+		return -EINVAL;
+	}
+
+	*val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, *val);
+
+	return 0;
+}
+
+static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, val);
+	if (scr > SCR_NOTIFICATION) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+			 __func__, scr);
+		return -EINVAL;
+	}
+	out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+	return 0;
+}
+
+static u32 core_scr_read(unsigned int scr)
+{
+	return in_le32((void __iomem *)(host_pvt.scr_addr_sstatus) +\
+			(scr * 4));
+}
+
+static void core_scr_write(unsigned int scr, u32 val)
+{
+	out_le32((void __iomem *)(host_pvt.scr_addr_sstatus) + (scr * 4),
+		val);
+}
+
+static void clear_serror(void)
+{
+	u32 val;
+	val = core_scr_read(SCR_ERROR);
+	core_scr_write(SCR_ERROR, val);
+
+}
+
+static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+{
+	out_le32(&hsdev->sata_dwc_regs->intpr,
+		 in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static u32 qcmd_tag_to_mask(u8 tag)
+{
+	return 0x00000001 << (tag & 0x1f);
+}
+
+/* See ahci.c */
+static void sata_dwc_error_intr(struct ata_port *ap,
+				struct sata_dwc_device *hsdev, uint intpr)
+{
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	unsigned int err_mask = 0, action = 0;
+	struct ata_queued_cmd *qc;
+	u32 serror;
+	u8 status, tag;
+	u32 err_reg;
+
+	ata_ehi_clear_desc(ehi);
+
+	serror = core_scr_read(SCR_ERROR);
+	status = ap->ops->sff_check_status(ap);
+
+	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
+			low));
+	tag = ap->link.active_tag;
+
+	dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
+		"dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
+		__func__, serror, intpr, status, host_pvt.dma_interrupt_count,
+		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+
+	/* Clear error register and interrupt bit */
+	clear_serror();
+	clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
+
+	/* This is the only error happening now.  TODO check for exact error */
+
+	err_mask |= AC_ERR_HOST_BUS;
+	action |= ATA_EH_RESET;
+
+	/* Pass this on to EH */
+	ehi->serror |= serror;
+	ehi->action |= action;
+
+	qc = ata_qc_from_tag(ap, tag);
+	if (qc)
+		qc->err_mask |= err_mask;
+	else
+		ehi->err_mask |= err_mask;
+
+	ata_port_abort(ap);
+}
+
+/*
+ * Function : sata_dwc_isr
+ * arguments : irq, void *dev_instance, struct pt_regs *regs
+ * Return value : irqreturn_t - status of IRQ
+ * This Interrupt handler called via port ops registered function.
+ * .irq_handler = sata_dwc_isr
+ */
+static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+{
+	struct ata_host *host = (struct ata_host *)dev_instance;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
+	struct ata_port *ap;
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	u8 status, tag;
+	int handled, num_processed, port = 0;
+	uint intpr, sactive, sactive2, tag_mask;
+	struct sata_dwc_device_port *hsdevp;
+	host_pvt.sata_dwc_sactive_issued = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Read the interrupt register */
+	intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr,
+		ap->link.active_tag);
+
+	/* Check for error interrupt */
+	if (intpr & SATA_DWC_INTPR_ERR) {
+		sata_dwc_error_intr(ap, hsdev, intpr);
+		handled = 1;
+		goto DONE;
+	}
+
+	/* Check for DMA SETUP FIS (FP DMA) interrupt */
+	if (intpr & SATA_DWC_INTPR_NEWFP) {
+		clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+		tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
+		dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+		if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
+			dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+		host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+
+		qc = ata_qc_from_tag(ap, tag);
+		/*
+		 * Start FP DMA for NCQ command.  At this point the tag is the
+		 * active tag.  It is the tag that matches the command about to
+		 * be completed.
+		 */
+		qc->ap->link.active_tag = tag;
+		sata_dwc_bmdma_start_by_tag(qc, tag);
+
+		handled = 1;
+		goto DONE;
+	}
+	sactive = core_scr_read(SCR_ACTIVE);
+	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	/* If no sactive issued and tag_mask is zero then this is not NCQ */
+	if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+		if (ap->link.active_tag == ATA_TAG_POISON)
+			tag = 0;
+		else
+			tag = ap->link.active_tag;
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* DEV interrupt w/ no active qc? */
+		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+			dev_err(ap->dev, "%s interrupt with no active qc "
+				"qc=%p\n", __func__, qc);
+			ap->ops->sff_check_status(ap);
+			handled = 1;
+			goto DONE;
+		}
+		status = ap->ops->sff_check_status(ap);
+
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		if (status & ATA_ERR) {
+			dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto DONE;
+		}
+
+		dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
+			__func__, ata_get_cmd_descript(qc->tf.protocol));
+DRVSTILLBUSY:
+		if (ata_is_dma(qc->tf.protocol)) {
+			/*
+			 * Each DMA transaction produces 2 interrupts. The DMAC
+			 * transfer complete interrupt and the SATA controller
+			 * operation done interrupt. The command should be
+			 * completed only after both interrupts are seen.
+			 */
+			host_pvt.dma_interrupt_count++;
+			if (hsdevp->dma_pending[tag] == \
+					SATA_DWC_DMA_PENDING_NONE) {
+				dev_err(ap->dev, "%s: DMA not pending "
+					"intpr=0x%08x status=0x%08x pending"
+					"=%d\n", __func__, intpr, status,
+					hsdevp->dma_pending[tag]);
+			}
+
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else if (ata_is_pio(qc->tf.protocol)) {
+			ata_sff_hsm_move(ap, qc, status, 0);
+			handled = 1;
+			goto DONE;
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto DRVSTILLBUSY;
+		}
+
+		handled = 1;
+		goto DONE;
+	}
+
+	/*
+	 * This is a NCQ command. At this point we need to figure out for which
+	 * tags we have gotten a completion interrupt.  One interrupt may serve
+	 * as completion for more than one operation when commands are queued
+	 * (NCQ).  We need to process each completed command.
+	 */
+
+	 /* process completed commands */
+	sactive = core_scr_read(SCR_ACTIVE);
+	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
+							tag_mask > 1) {
+		dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x  sactive_issued=0x%08x"
+			"tag_mask=0x%08x\n", __func__, sactive,
+			host_pvt.sata_dwc_sactive_issued, tag_mask);
+	}
+
+	if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
+					(host_pvt.sata_dwc_sactive_issued)) {
+		dev_warn(ap->dev, "Bad tag mask?  sactive=0x%08x "
+			 "(host_pvt.sata_dwc_sactive_issued)=0x%08x  tag_mask"
+			 "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued,
+			  tag_mask);
+	}
+
+	/* read just to clear ... not bad if currently still busy */
+	status = ap->ops->sff_check_status(ap);
+	dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);
+
+	tag = 0;
+	num_processed = 0;
+	while (tag_mask) {
+		num_processed++;
+		while (!(tag_mask & 0x00000001)) {
+			tag++;
+			tag_mask <<= 1;
+		}
+
+		tag_mask &= (~0x00000001);
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* To be picked up by completion functions */
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		/* Let libata/scsi layers handle error */
+		if (status & ATA_ERR) {
+			dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__,
+				status);
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto DONE;
+		}
+
+		/* Process completed command */
+		dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
+			ata_get_cmd_descript(qc->tf.protocol));
+		if (ata_is_dma(qc->tf.protocol)) {
+			host_pvt.dma_interrupt_count++;
+			if (hsdevp->dma_pending[tag] == \
+					SATA_DWC_DMA_PENDING_NONE)
+				dev_warn(ap->dev, "%s: DMA not pending?\n",
+					__func__);
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto STILLBUSY;
+		}
+		continue;
+
+STILLBUSY:
+		ap->stats.idle_irq++;
+		dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
+			ap->print_id);
+	} /* while tag_mask */
+
+	/*
+	 * Check to see if any commands completed while we were processing our
+	 * initial set of completed commands (read status clears interrupts,
+	 * so we might miss a completed command interrupt if one came in while
+	 * we were processing --we read status as part of processing a completed
+	 * command).
+	 */
+	sactive2 = core_scr_read(SCR_ACTIVE);
+	if (sactive2 != sactive) {
+		dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2"
+			"=0x%x\n", sactive, sactive2);
+	}
+	handled = 1;
+
+DONE:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return IRQ_RETVAL(handled);
+}
+
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_RX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_TX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else {
+		/*
+		 * This should not happen, it indicates the driver is out of
+		 * sync.  If it does happen, clear dmacr anyway.
+		 */
+		dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and"
+			"TX DMA not pending tag=0x%02x pending=%d"
+			" dmacr: 0x%08x\n", __func__, tag,
+			hsdevp->dma_pending[tag],
+			in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			SATA_DWC_DMACR_TXRXCH_CLEAR);
+	}
+}
+
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+{
+	struct ata_queued_cmd *qc;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	u8 tag = 0;
+
+	tag = ap->link.active_tag;
+	qc = ata_qc_from_tag(ap, tag);
+	if (!qc) {
+		dev_err(ap->dev, "failed to get qc");
+		return;
+	}
+
+#ifdef DEBUG_NCQ
+	if (tag > 0) {
+		dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
+			 "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+			 ata_get_cmd_descript(qc->dma_dir),
+			 ata_get_cmd_descript(qc->tf.protocol),
+			 in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+	}
+#endif
+
+	if (ata_is_dma(qc->tf.protocol)) {
+		if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+			dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
+				"pending dmacr: 0x%08x\n", __func__,
+				in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		}
+
+		hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+		sata_dwc_qc_complete(ap, qc, check_status);
+		ap->link.active_tag = ATA_TAG_POISON;
+	} else {
+		sata_dwc_qc_complete(ap, qc, check_status);
+	}
+}
+
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status)
+{
+	u8 status = 0;
+	u32 mask = 0x0;
+	u8 tag = qc->tag;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	host_pvt.sata_dwc_sactive_queued = 0;
+	dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
+		dev_err(ap->dev, "TX DMA PENDING\n");
+	else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
+		dev_err(ap->dev, "RX DMA PENDING\n");
+	dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
+		" protocol=%d\n", qc->tf.command, status, ap->print_id,
+		 qc->tf.protocol);
+
+	/* clear active bit */
+	mask = (~(qcmd_tag_to_mask(tag)));
+	host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
+						& mask;
+	host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
+						& mask;
+	ata_qc_complete(qc);
+	return 0;
+}
+
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+{
+	/* Enable selective interrupts by setting the interrupt maskregister*/
+	out_le32(&hsdev->sata_dwc_regs->intmr,
+		 SATA_DWC_INTMR_ERRM |
+		 SATA_DWC_INTMR_NEWFPM |
+		 SATA_DWC_INTMR_PMABRTM |
+		 SATA_DWC_INTMR_DMATM);
+	/*
+	 * Unmask the error bits that should trigger an error interrupt by
+	 * setting the error mask register.
+	 */
+	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+	dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+		 __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
+		in_le32(&hsdev->sata_dwc_regs->errmr));
+}
+
+static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+{
+	port->cmd_addr = (void *)base + 0x00;
+	port->data_addr = (void *)base + 0x00;
+
+	port->error_addr = (void *)base + 0x04;
+	port->feature_addr = (void *)base + 0x04;
+
+	port->nsect_addr = (void *)base + 0x08;
+
+	port->lbal_addr = (void *)base + 0x0c;
+	port->lbam_addr = (void *)base + 0x10;
+	port->lbah_addr = (void *)base + 0x14;
+
+	port->device_addr = (void *)base + 0x18;
+	port->command_addr = (void *)base + 0x1c;
+	port->status_addr = (void *)base + 0x1c;
+
+	port->altstatus_addr = (void *)base + 0x20;
+	port->ctl_addr = (void *)base + 0x20;
+}
+
+/*
+ * Function : sata_dwc_port_start
+ * arguments : struct ata_ioports *port
+ * Return value : returns 0 if success, error code otherwise
+ * This function allocates the scatter gather LLI table for AHB DMA
+ */
+static int sata_dwc_port_start(struct ata_port *ap)
+{
+	int err = 0;
+	struct sata_dwc_device *hsdev;
+	struct sata_dwc_device_port *hsdevp = NULL;
+	struct device *pdev;
+	int i;
+
+	hsdev = HSDEV_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);
+
+	hsdev->host = ap->host;
+	pdev = ap->host->dev;
+	if (!pdev) {
+		dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
+		err = -ENODEV;
+		goto CLEANUP;
+	}
+
+	/* Allocate Port Struct */
+	hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
+	if (!hsdevp) {
+		dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
+		err = -ENOMEM;
+		goto CLEANUP;
+	}
+	hsdevp->hsdev = hsdev;
+
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+	ap->bmdma_prd = 0;	/* set these so libata doesn't use them */
+	ap->bmdma_prd_dma = 0;
+
+	/*
+	 * DMA - Assign scatter gather LLI table. We can't use the libata
+	 * version since it's PRD is IDE PCI specific.
+	 */
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+		hsdevp->llit[i] = dma_alloc_coherent(pdev,
+						     SATA_DWC_DMAC_LLI_TBL_SZ,
+						     &(hsdevp->llit_dma[i]),
+						     GFP_ATOMIC);
+		if (!hsdevp->llit[i]) {
+			dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
+				 __func__);
+			err = -ENOMEM;
+			goto CLEANUP;
+		}
+	}
+
+	if (ap->port_no == 0)  {
+		dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+			__func__);
+		out_le32(&hsdev->sata_dwc_regs->dmacr,
+			 SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+		dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
+			 __func__);
+		out_le32(&hsdev->sata_dwc_regs->dbtsr,
+			 (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+			  SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+	}
+
+	/* Clear any error bits before libata starts issuing commands */
+	clear_serror();
+	ap->private_data = hsdevp;
+
+CLEANUP:
+	if (err) {
+		sata_dwc_port_stop(ap);
+		dev_dbg(ap->dev, "%s: fail\n", __func__);
+	} else {
+		dev_dbg(ap->dev, "%s: done\n", __func__);
+	}
+
+	return err;
+}
+
+static void sata_dwc_port_stop(struct ata_port *ap)
+{
+	int i;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
+
+	if (hsdevp && hsdev) {
+		/* deallocate LLI table */
+		for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+			dma_free_coherent(ap->host->dev,
+					  SATA_DWC_DMAC_LLI_TBL_SZ,
+					 hsdevp->llit[i], hsdevp->llit_dma[i]);
+		}
+
+		kfree(hsdevp);
+	}
+	ap->private_data = NULL;
+}
+
+/*
+ * Function : sata_dwc_exec_command_by_tag
+ * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
+ * Return value : None
+ * This function keeps track of individual command tag ids and calls
+ * ata_exec_command in libata
+ */
+static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+					 struct ata_taskfile *tf,
+					 u8 tag, u32 cmd_issued)
+{
+	unsigned long flags;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
+		ata_get_cmd_descript(tf), tag);
+
+	spin_lock_irqsave(&ap->host->lock, flags);
+	hsdevp->cmd_issued[tag] = cmd_issued;
+	spin_unlock_irqrestore(&ap->host->lock, flags);
+	/*
+	 * Clear SError before executing a new command.
+	 * sata_dwc_scr_write and read can not be used here. Clearing the PM
+	 * managed SError register for the disk needs to be done before the
+	 * task file is loaded.
+	 */
+	clear_serror();
+	ata_sff_exec_command(ap, tf);
+}
+
+static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
+				     SATA_DWC_CMD_ISSUED_PEND);
+}
+
+static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+	sata_dwc_bmdma_setup_by_tag(qc, tag);
+}
+
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	int start_dma;
+	u32 reg, dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
+	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int dir = qc->dma_dir;
+	dma_chan = hsdevp->dma_chan[tag];
+
+	if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
+		start_dma = 1;
+		if (dir == DMA_TO_DEVICE)
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
+		else
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
+	} else {
+		dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
+			"(tag=%d) DMA NOT started\n", __func__,
+			hsdevp->cmd_issued[tag], tag);
+		start_dma = 0;
+	}
+
+	dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
+		"start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+		ata_get_cmd_descript(qc->dma_dir), start_dma);
+	sata_dwc_tf_dump(&(qc->tf));
+
+	if (start_dma) {
+		reg = core_scr_read(SCR_ERROR);
+		if (reg & SATA_DWC_SERROR_ERR_BITS) {
+			dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+				__func__, reg);
+		}
+
+		if (dir == DMA_TO_DEVICE)
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+				SATA_DWC_DMACR_TXCHEN);
+		else
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+				SATA_DWC_DMACR_RXCHEN);
+
+		/* Enable AHB DMA transfer on the specified channel */
+		dma_dwc_xfer_start(dma_chan);
+	}
+}
+
+static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+	dev_dbg(qc->ap->dev, "%s\n", __func__);
+	sata_dwc_bmdma_start_by_tag(qc, tag);
+}
+
+/*
+ * Function : sata_dwc_qc_prep_by_tag
+ * arguments : ata_queued_cmd *qc, u8 tag
+ * Return value : None
+ * qc_prep for a particular queued command based on tag
+ */
+static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	struct scatterlist *sg = qc->sg;
+	struct ata_port *ap = qc->ap;
+	u32 dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int err;
+
+	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+		__func__, ap->port_no, ata_get_cmd_descript(qc->dma_dir),
+		 qc->n_elem);
+
+	dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
+				      hsdevp->llit_dma[tag],
+				      (void *__iomem)(&hsdev->sata_dwc_regs->\
+				      dmadr), qc->dma_dir);
+	if (dma_chan < 0) {
+		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
+			__func__, err);
+		return;
+	}
+	hsdevp->dma_chan[tag] = dma_chan;
+}
+
+static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+{
+	u32 sactive;
+	u8 tag = qc->tag;
+	struct ata_port *ap = qc->ap;
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0 || ap->link.sactive > 1)
+		dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
+			 "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+			 __func__, ap->print_id, qc->tf.command,
+			 ata_get_cmd_descript(&qc->tf),
+			 qc->tag, ata_get_cmd_descript(qc->tf.protocol),
+			 ap->link.active_tag, ap->link.sactive);
+#endif
+
+	if (!ata_is_ncq(qc->tf.protocol))
+		tag = 0;
+	sata_dwc_qc_prep_by_tag(qc, tag);
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		sactive = core_scr_read(SCR_ACTIVE);
+		sactive |= (0x00000001 << tag);
+		core_scr_write(SCR_ACTIVE, sactive);
+
+		dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
+			"sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
+			sactive);
+
+		ap->ops->sff_tf_load(ap, &qc->tf);
+		sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
+					     SATA_DWC_CMD_ISSUED_PEND);
+	} else {
+		ata_sff_qc_issue(qc);
+	}
+	return 0;
+}
+
+/*
+ * Function : sata_dwc_qc_prep
+ * arguments : ata_queued_cmd *qc
+ * Return value : None
+ * qc_prep for a particular queued command
+ */
+
+static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+{
+	if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+		return;
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0)
+		dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+			 __func__, tag, qc->ap->link.active_tag);
+
+	return ;
+#endif
+}
+
+static void sata_dwc_error_handler(struct ata_port *ap)
+{
+	ap->link.flags |= ATA_LFLAG_NO_HRST;
+	ata_sff_error_handler(ap);
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_dwc_sht = {
+	ATA_NCQ_SHT(DRV_NAME),
+	/*
+	 * test-only: Currently this driver doesn't handle NCQ
+	 * correctly. We enable NCQ but set the queue depth to a
+	 * max of 1. This will get fixed in in a future release.
+	 */
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.can_queue		= ATA_DEF_QUEUE,	/* ATA_MAX_QUEUE */
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations sata_dwc_ops = {
+	.inherits		= &ata_sff_port_ops,
+
+	.error_handler		= sata_dwc_error_handler,
+
+	.qc_prep		= sata_dwc_qc_prep,
+	.qc_issue		= sata_dwc_qc_issue,
+
+	.scr_read		= sata_dwc_scr_read,
+	.scr_write		= sata_dwc_scr_write,
+
+	.port_start		= sata_dwc_port_start,
+	.port_stop		= sata_dwc_port_stop,
+
+	.bmdma_setup		= sata_dwc_bmdma_setup,
+	.bmdma_start		= sata_dwc_bmdma_start,
+};
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+		.pio_mask	= 0x1f,	/* pio 0-4 */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &sata_dwc_ops,
+	},
+};
+
+static int sata_dwc_probe(struct of_device *ofdev,
+			const struct of_device_id *match)
+{
+	struct sata_dwc_device *hsdev;
+	u32 idr, versionr;
+	char *ver = (char *)&versionr;
+	u8 *base = NULL;
+	int err = 0;
+	int irq, rc;
+	struct ata_host *host;
+	struct ata_port_info pi = sata_dwc_port_info[0];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+
+	/* Allocate DWC SATA device */
+	hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+	if (hsdev == NULL) {
+		dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+	memset(hsdev, 0, sizeof(*hsdev));
+
+	/* Ioremap SATA registers */
+	base = of_iomap(ofdev->dev.of_node, 0);
+	if (!base) {
+		dev_err(&ofdev->dev, "ioremap failed for SATA register"
+			" address\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+	hsdev->reg_base = base;
+	dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+	/* Synopsys DWC SATA specific Registers */
+	hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+	/* Allocate and fill host */
+	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+	if (!host) {
+		dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	host->private_data = hsdev;
+
+	/* Setup port */
+	host->ports[0]->ioaddr.cmd_addr = base;
+	host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+	host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+	sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
+
+	/* Read the ID and Version Registers */
+	idr = in_le32(&hsdev->sata_dwc_regs->idr);
+	versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
+	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+		   idr, ver[0], ver[1], ver[2]);
+
+	/* Get SATA DMA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA DMA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* Get physical SATA DMA register base address */
+	host_pvt.sata_dma_regs = of_iomap(ofdev->dev.of_node, 1);
+	if (!(host_pvt.sata_dma_regs)) {
+		dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
+			" address\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* Save dev for later use in dev_xxx() routines */
+	host_pvt.dwc_dev = &ofdev->dev;
+
+	/* Initialize AHB DMAC */
+	dma_dwc_init(hsdev, irq);
+
+	/* Enable SATA Interrupts */
+	sata_dwc_enable_interrupts(hsdev);
+
+	/* Get SATA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA DMA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/*
+	 * Now, register with libATA core, this will also initiate the
+	 * device discovery process, invoking our port_start() handler &
+	 * error_handler() to execute a dummy Softreset EH session
+	 */
+	rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+
+	if (rc != 0)
+		dev_err(&ofdev->dev, "failed to activate host");
+
+	dev_set_drvdata(&ofdev->dev, host);
+	return 0;
+
+error_out:
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	if (base)
+		iounmap(base);
+	return err;
+}
+
+static int sata_dwc_remove(struct of_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct sata_dwc_device *hsdev = host->private_data;
+
+	ata_host_detach(host);
+	dev_set_drvdata(dev, NULL);
+
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	iounmap(hsdev->reg_base);
+	kfree(hsdev);
+	kfree(host);
+	dev_dbg(&ofdev->dev, "done\n");
+	return 0;
+}
+
+static const struct of_device_id sata_dwc_match[] = {
+	{ .compatible = "amcc,sata-460ex", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sata_dwc_match);
+
+static struct of_platform_driver sata_dwc_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = sata_dwc_match,
+	},
+	.probe = sata_dwc_probe,
+	.remove = sata_dwc_remove,
+};
+
+static int __init sata_dwc_init(void)
+{
+	return	of_register_platform_driver(&sata_dwc_driver);
+}
+
+static void __exit sata_dwc_exit(void)
+{
+	of_unregister_platform_driver(&sata_dwc_driver);
+}
+
+module_init(sata_dwc_init);
+module_exit(sata_dwc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 61c89b54ea2..18c986dbb7f 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1096,7 +1096,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 {
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
-	u32 hstatus, qc_active = 0;
+	u32 hstatus, done_mask = 0;
 	struct ata_queued_cmd *qc;
 	u32 SError;
 
@@ -1116,28 +1116,28 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 	}
 
 	/* Read command completed register */
-	qc_active = ioread32(hcr_base + CC);
+	done_mask = ioread32(hcr_base + CC);
 
 	VPRINTK("Status of all queues :\n");
-	VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
-		qc_active,
+	VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+		done_mask,
 		ioread32(hcr_base + CA),
 		ioread32(hcr_base + CE),
 		ioread32(hcr_base + CQ),
 		ap->qc_active);
 
-	if (qc_active & ap->qc_active) {
+	if (done_mask & ap->qc_active) {
 		int i;
 		/* clear CC bit, this will also complete the interrupt */
-		iowrite32(qc_active, hcr_base + CC);
+		iowrite32(done_mask, hcr_base + CC);
 
 		DPRINTK("Status of all queues :\n");
-		DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
-			qc_active, ioread32(hcr_base + CA),
+		DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
+			done_mask, ioread32(hcr_base + CA),
 			ioread32(hcr_base + CE));
 
 		for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
-			if (qc_active & (1 << i)) {
+			if (done_mask & (1 << i)) {
 				qc = ata_qc_from_tag(ap, i);
 				if (qc) {
 					ata_qc_complete(qc);
@@ -1164,7 +1164,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 		/* Spurious Interrupt!! */
 		DPRINTK("spurious interrupt!!, CC = 0x%x\n",
 			ioread32(hcr_base + CC));
-		iowrite32(qc_active, hcr_base + CC);
+		iowrite32(done_mask, hcr_base + CC);
 		return;
 	}
 }
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a476cd99b95..9463c71dd38 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2716,34 +2716,35 @@ static void mv_err_intr(struct ata_port *ap)
 static void mv_process_crpb_response(struct ata_port *ap,
 		struct mv_crpb *response, unsigned int tag, int ncq_enabled)
 {
+	u8 ata_status;
+	u16 edma_status = le16_to_cpu(response->flags);
 	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
 
-	if (qc) {
-		u8 ata_status;
-		u16 edma_status = le16_to_cpu(response->flags);
-		/*
-		 * edma_status from a response queue entry:
-		 *   LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
-		 *   MSB is saved ATA status from command completion.
-		 */
-		if (!ncq_enabled) {
-			u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
-			if (err_cause) {
-				/*
-				 * Error will be seen/handled by mv_err_intr().
-				 * So do nothing at all here.
-				 */
-				return;
-			}
-		}
-		ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
-		if (!ac_err_mask(ata_status))
-			ata_qc_complete(qc);
-		/* else: leave it for mv_err_intr() */
-	} else {
+	if (unlikely(!qc)) {
 		ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
 				__func__, tag);
+		return;
+	}
+
+	/*
+	 * edma_status from a response queue entry:
+	 *   LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
+	 *   MSB is saved ATA status from command completion.
+	 */
+	if (!ncq_enabled) {
+		u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
+		if (err_cause) {
+			/*
+			 * Error will be seen/handled by
+			 * mv_err_intr().  So do nothing at all here.
+			 */
+			return;
+		}
 	}
+	ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
+	if (!ac_err_mask(ata_status))
+		ata_qc_complete(qc);
+	/* else: leave it for mv_err_intr() */
 }
 
 static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 21161136cad..cb89ef8d99d 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1018,7 +1018,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 			      NV_ADMA_STAT_CPBERR |
 			      NV_ADMA_STAT_CMD_COMPLETE)) {
 			u32 check_commands = notifier_clears[i];
-			int pos, error = 0;
+			int pos, rc;
 
 			if (status & NV_ADMA_STAT_CPBERR) {
 				/* check all active commands */
@@ -1030,10 +1030,12 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 			}
 
 			/* check CPBs for completed commands */
-			while ((pos = ffs(check_commands)) && !error) {
+			while ((pos = ffs(check_commands))) {
 				pos--;
-				error = nv_adma_check_cpb(ap, pos,
+				rc = nv_adma_check_cpb(ap, pos,
 						notifier_error & (1 << pos));
+				if (unlikely(rc))
+					check_commands = 0;
 				check_commands &= ~(1 << pos);
 			}
 		}
@@ -2129,7 +2131,6 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 	struct nv_swncq_port_priv *pp = ap->private_data;
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	u32 sactive;
-	int nr_done = 0;
 	u32 done_mask;
 	int i;
 	u8 host_stat;
@@ -2170,22 +2171,21 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 			pp->dhfis_bits &= ~(1 << i);
 			pp->dmafis_bits &= ~(1 << i);
 			pp->sdbfis_bits |= (1 << i);
-			nr_done++;
 		}
 	}
 
 	if (!ap->qc_active) {
 		DPRINTK("over\n");
 		nv_swncq_pp_reinit(ap);
-		return nr_done;
+		return 0;
 	}
 
 	if (pp->qc_active & pp->dhfis_bits)
-		return nr_done;
+		return 0;
 
 	if ((pp->ncq_flags & ncq_saw_backout) ||
 	    (pp->qc_active ^ pp->dhfis_bits))
-		/* if the controller cann't get a device to host register FIS,
+		/* if the controller can't get a device to host register FIS,
 		 * The driver needs to reissue the new command.
 		 */
 		lack_dhfis = 1;
@@ -2202,7 +2202,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 	if (lack_dhfis) {
 		qc = ata_qc_from_tag(ap, pp->last_issue_tag);
 		nv_swncq_issue_atacmd(ap, qc);
-		return nr_done;
+		return 0;
 	}
 
 	if (pp->defer_queue.defer_bits) {
@@ -2212,7 +2212,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		nv_swncq_issue_atacmd(ap, qc);
 	}
 
-	return nr_done;
+	return 0;
 }
 
 static inline u32 nv_swncq_tag(struct ata_port *ap)
@@ -2224,7 +2224,7 @@ static inline u32 nv_swncq_tag(struct ata_port *ap)
 	return (tag & 0x1f);
 }
 
-static int nv_swncq_dmafis(struct ata_port *ap)
+static void nv_swncq_dmafis(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc;
 	unsigned int rw;
@@ -2239,7 +2239,7 @@ static int nv_swncq_dmafis(struct ata_port *ap)
 	qc = ata_qc_from_tag(ap, tag);
 
 	if (unlikely(!qc))
-		return 0;
+		return;
 
 	rw = qc->tf.flags & ATA_TFLAG_WRITE;
 
@@ -2254,8 +2254,6 @@ static int nv_swncq_dmafis(struct ata_port *ap)
 		dmactl |= ATA_DMA_WR;
 
 	iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	return 1;
 }
 
 static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
@@ -2265,7 +2263,6 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	u32 serror;
 	u8 ata_stat;
-	int rc = 0;
 
 	ata_stat = ap->ops->sff_check_status(ap);
 	nv_swncq_irq_clear(ap, fis);
@@ -2310,8 +2307,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 			"dhfis 0x%X dmafis 0x%X sactive 0x%X\n",
 			ap->print_id, pp->qc_active, pp->dhfis_bits,
 			pp->dmafis_bits, readl(pp->sactive_block));
-		rc = nv_swncq_sdbfis(ap);
-		if (rc < 0)
+		if (nv_swncq_sdbfis(ap) < 0)
 			goto irq_error;
 	}
 
@@ -2348,7 +2344,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 		 */
 		pp->dmafis_bits |= (0x1 << nv_swncq_tag(ap));
 		pp->ncq_flags |= ncq_saw_dmas;
-		rc = nv_swncq_dmafis(ap);
+		nv_swncq_dmafis(ap);
 	}
 
 irq_exit:
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index da8f176c051..b7385e07771 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2657,7 +2657,7 @@ static int __devinit fore200e_sba_probe(struct of_device *op,
 
 	fore200e->bus = bus;
 	fore200e->bus_dev = op;
-	fore200e->irq = op->irqs[0];
+	fore200e->irq = op->archdata.irqs[0];
 	fore200e->phys_base = op->resource[0].start;
 
 	sprintf(fore200e->name, "%s-%d", bus->model_name, index);
@@ -2795,7 +2795,7 @@ static int __init fore200e_module_init(void)
 	printk(FORE200E "FORE Systems 200E-series ATM driver - version " FORE200E_VERSION "\n");
 
 #ifdef CONFIG_SBUS
-	err = of_register_driver(&fore200e_sba_driver, &of_bus_type);
+	err = of_register_platform_driver(&fore200e_sba_driver);
 	if (err)
 		return err;
 #endif
@@ -2806,7 +2806,7 @@ static int __init fore200e_module_init(void)
 
 #ifdef CONFIG_SBUS
 	if (err)
-		of_unregister_driver(&fore200e_sba_driver);
+		of_unregister_platform_driver(&fore200e_sba_driver);
 #endif
 
 	return err;
@@ -2818,7 +2818,7 @@ static void __exit fore200e_module_cleanup(void)
 	pci_unregister_driver(&fore200e_pca_driver);
 #endif
 #ifdef CONFIG_SBUS
-	of_unregister_driver(&fore200e_sba_driver);
+	of_unregister_platform_driver(&fore200e_sba_driver);
 #endif
 }
 
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 6174965d9a4..f916ddf6393 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -781,7 +781,8 @@ static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
 	sk_for_each(s, node, head) {
 		vcc = atm_sk(s);
 		if (vcc->dev == dev && vcc->vci == vci &&
-		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE)
+		    vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
+		    test_bit(ATM_VF_READY, &vcc->flags))
 			goto out;
 	}
 	vcc = NULL;
@@ -907,6 +908,10 @@ static void pclose(struct atm_vcc *vcc)
 	clear_bit(ATM_VF_ADDR, &vcc->flags);
 	clear_bit(ATM_VF_READY, &vcc->flags);
 
+	/* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
+	   tasklet has finished processing any incoming packets (and, more to
+	   the point, using the vcc pointer). */
+	tasklet_unlock_wait(&card->tlet);
 	return;
 }
 
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 12eec3f633b..eb1b7fa20dc 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -945,8 +945,8 @@ bus_devices_fail:
 	bus_remove_file(bus, &bus_attr_uevent);
 bus_uevent_fail:
 	kset_unregister(&bus->p->subsys);
-	kfree(bus->p);
 out:
+	kfree(bus->p);
 	bus->p = NULL;
 	return retval;
 }
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 74707b88f11..aed85f1c446 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -1599,7 +1599,7 @@ EXPORT_SYMBOL_GPL(device_destroy);
  * on the same device to ensure that new_name is valid and
  * won't conflict with other devices.
  */
-int device_rename(struct device *dev, char *new_name)
+int device_rename(struct device *dev, const char *new_name)
 {
 	char *old_class_name = NULL;
 	char *new_class_name = NULL;
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 503c2620bbc..da57ee9d63f 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -51,6 +51,10 @@ static int driver_sysfs_add(struct device *dev)
 {
 	int ret;
 
+	if (dev->bus)
+		blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
+					     BUS_NOTIFY_BIND_DRIVER, dev);
+
 	ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
 			  kobject_name(&dev->kobj));
 	if (ret == 0) {
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index d4d8ce53886..f369e279598 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -8,7 +8,7 @@
 
 struct dma_coherent_mem {
 	void		*virt_base;
-	u32		device_base;
+	dma_addr_t	device_base;
 	int		size;
 	int		flags;
 	unsigned long	*bitmap;
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 3f093b0dd21..c8a44f5e058 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -87,29 +87,32 @@ static DEFINE_MUTEX(fw_lock);
 
 struct firmware_priv {
 	struct completion completion;
-	struct bin_attribute attr_data;
 	struct firmware *fw;
 	unsigned long status;
 	struct page **pages;
 	int nr_pages;
 	int page_array_size;
 	struct timer_list timeout;
+	struct device dev;
 	bool nowait;
 	char fw_id[];
 };
 
-static void
-fw_load_abort(struct firmware_priv *fw_priv)
+static struct firmware_priv *to_firmware_priv(struct device *dev)
+{
+	return container_of(dev, struct firmware_priv, dev);
+}
+
+static void fw_load_abort(struct firmware_priv *fw_priv)
 {
 	set_bit(FW_STATUS_ABORT, &fw_priv->status);
 	wmb();
 	complete(&fw_priv->completion);
 }
 
-static ssize_t
-firmware_timeout_show(struct class *class,
-		      struct class_attribute *attr,
-		      char *buf)
+static ssize_t firmware_timeout_show(struct class *class,
+				     struct class_attribute *attr,
+				     char *buf)
 {
 	return sprintf(buf, "%d\n", loading_timeout);
 }
@@ -127,14 +130,14 @@ firmware_timeout_show(struct class *class,
  *
  *	Note: zero means 'wait forever'.
  **/
-static ssize_t
-firmware_timeout_store(struct class *class,
-			struct class_attribute *attr,
-			const char *buf, size_t count)
+static ssize_t firmware_timeout_store(struct class *class,
+				      struct class_attribute *attr,
+				      const char *buf, size_t count)
 {
 	loading_timeout = simple_strtol(buf, NULL, 10);
 	if (loading_timeout < 0)
 		loading_timeout = 0;
+
 	return count;
 }
 
@@ -146,21 +149,20 @@ static struct class_attribute firmware_class_attrs[] = {
 
 static void fw_dev_release(struct device *dev)
 {
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	int i;
 
 	for (i = 0; i < fw_priv->nr_pages; i++)
 		__free_page(fw_priv->pages[i]);
 	kfree(fw_priv->pages);
 	kfree(fw_priv);
-	kfree(dev);
 
 	module_put(THIS_MODULE);
 }
 
 static int firmware_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 
 	if (add_uevent_var(env, "FIRMWARE=%s", fw_priv->fw_id))
 		return -ENOMEM;
@@ -182,8 +184,9 @@ static struct class firmware_class = {
 static ssize_t firmware_loading_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	int loading = test_bit(FW_STATUS_LOADING, &fw_priv->status);
+
 	return sprintf(buf, "%d\n", loading);
 }
 
@@ -219,7 +222,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 				      struct device_attribute *attr,
 				      const char *buf, size_t count)
 {
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	int loading = simple_strtol(buf, NULL, 10);
 	int i;
 
@@ -277,13 +280,12 @@ static ssize_t firmware_loading_store(struct device *dev,
 
 static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store);
 
-static ssize_t
-firmware_data_read(struct file *filp, struct kobject *kobj,
-		   struct bin_attribute *bin_attr, char *buffer, loff_t offset,
-		   size_t count)
+static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buffer, loff_t offset, size_t count)
 {
 	struct device *dev = to_dev(kobj);
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t ret_count;
 
@@ -322,8 +324,7 @@ out:
 	return ret_count;
 }
 
-static int
-fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
+static int fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
 {
 	int pages_needed = ALIGN(min_size, PAGE_SIZE) >> PAGE_SHIFT;
 
@@ -373,13 +374,12 @@ fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
  *	Data written to the 'data' attribute will be later handed to
  *	the driver as a firmware image.
  **/
-static ssize_t
-firmware_data_write(struct file* filp, struct kobject *kobj,
-		    struct bin_attribute *bin_attr, char *buffer,
-		    loff_t offset, size_t count)
+static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *bin_attr,
+				   char *buffer, loff_t offset, size_t count)
 {
 	struct device *dev = to_dev(kobj);
-	struct firmware_priv *fw_priv = dev_get_drvdata(dev);
+	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t retval;
 
@@ -420,116 +420,103 @@ out:
 	return retval;
 }
 
-static struct bin_attribute firmware_attr_data_tmpl = {
-	.attr = {.name = "data", .mode = 0644},
+static struct bin_attribute firmware_attr_data = {
+	.attr = { .name = "data", .mode = 0644 },
 	.size = 0,
 	.read = firmware_data_read,
 	.write = firmware_data_write,
 };
 
-static void
-firmware_class_timeout(u_long data)
+static void firmware_class_timeout(u_long data)
 {
 	struct firmware_priv *fw_priv = (struct firmware_priv *) data;
+
 	fw_load_abort(fw_priv);
 }
 
-static int fw_register_device(struct device **dev_p, const char *fw_name,
-			      struct device *device)
+static struct firmware_priv *
+fw_create_instance(struct firmware *firmware, const char *fw_name,
+		   struct device *device, bool uevent, bool nowait)
 {
-	int retval;
-	struct firmware_priv *fw_priv =
-		kzalloc(sizeof(*fw_priv) + strlen(fw_name) + 1 , GFP_KERNEL);
-	struct device *f_dev = kzalloc(sizeof(*f_dev), GFP_KERNEL);
-
-	*dev_p = NULL;
+	struct firmware_priv *fw_priv;
+	struct device *f_dev;
+	int error;
 
-	if (!fw_priv || !f_dev) {
+	fw_priv = kzalloc(sizeof(*fw_priv) + strlen(fw_name) + 1 , GFP_KERNEL);
+	if (!fw_priv) {
 		dev_err(device, "%s: kmalloc failed\n", __func__);
-		retval = -ENOMEM;
-		goto error_kfree;
+		error = -ENOMEM;
+		goto err_out;
 	}
 
+	fw_priv->fw = firmware;
+	fw_priv->nowait = nowait;
 	strcpy(fw_priv->fw_id, fw_name);
 	init_completion(&fw_priv->completion);
-	fw_priv->attr_data = firmware_attr_data_tmpl;
-	fw_priv->timeout.function = firmware_class_timeout;
-	fw_priv->timeout.data = (u_long) fw_priv;
-	init_timer(&fw_priv->timeout);
+	setup_timer(&fw_priv->timeout,
+		    firmware_class_timeout, (u_long) fw_priv);
 
+	f_dev = &fw_priv->dev;
+
+	device_initialize(f_dev);
 	dev_set_name(f_dev, "%s", dev_name(device));
 	f_dev->parent = device;
 	f_dev->class = &firmware_class;
-	dev_set_drvdata(f_dev, fw_priv);
-	dev_set_uevent_suppress(f_dev, 1);
-	retval = device_register(f_dev);
-	if (retval) {
-		dev_err(device, "%s: device_register failed\n", __func__);
-		put_device(f_dev);
-		return retval;
-	}
-	*dev_p = f_dev;
-	return 0;
-
-error_kfree:
-	kfree(f_dev);
-	kfree(fw_priv);
-	return retval;
-}
 
-static int fw_setup_device(struct firmware *fw, struct device **dev_p,
-			   const char *fw_name, struct device *device,
-			   int uevent, bool nowait)
-{
-	struct device *f_dev;
-	struct firmware_priv *fw_priv;
-	int retval;
-
-	*dev_p = NULL;
-	retval = fw_register_device(&f_dev, fw_name, device);
-	if (retval)
-		goto out;
+	dev_set_uevent_suppress(f_dev, true);
 
 	/* Need to pin this module until class device is destroyed */
 	__module_get(THIS_MODULE);
 
-	fw_priv = dev_get_drvdata(f_dev);
-
-	fw_priv->nowait = nowait;
+	error = device_add(f_dev);
+	if (error) {
+		dev_err(device, "%s: device_register failed\n", __func__);
+		goto err_put_dev;
+	}
 
-	fw_priv->fw = fw;
-	sysfs_bin_attr_init(&fw_priv->attr_data);
-	retval = sysfs_create_bin_file(&f_dev->kobj, &fw_priv->attr_data);
-	if (retval) {
+	error = device_create_bin_file(f_dev, &firmware_attr_data);
+	if (error) {
 		dev_err(device, "%s: sysfs_create_bin_file failed\n", __func__);
-		goto error_unreg;
+		goto err_del_dev;
 	}
 
-	retval = device_create_file(f_dev, &dev_attr_loading);
-	if (retval) {
+	error = device_create_file(f_dev, &dev_attr_loading);
+	if (error) {
 		dev_err(device, "%s: device_create_file failed\n", __func__);
-		goto error_unreg;
+		goto err_del_bin_attr;
 	}
 
 	if (uevent)
-		dev_set_uevent_suppress(f_dev, 0);
-	*dev_p = f_dev;
-	goto out;
+		dev_set_uevent_suppress(f_dev, false);
+
+	return fw_priv;
+
+err_del_bin_attr:
+	device_remove_bin_file(f_dev, &firmware_attr_data);
+err_del_dev:
+	device_del(f_dev);
+err_put_dev:
+	put_device(f_dev);
+err_out:
+	return ERR_PTR(error);
+}
+
+static void fw_destroy_instance(struct firmware_priv *fw_priv)
+{
+	struct device *f_dev = &fw_priv->dev;
 
-error_unreg:
+	device_remove_file(f_dev, &dev_attr_loading);
+	device_remove_bin_file(f_dev, &firmware_attr_data);
 	device_unregister(f_dev);
-out:
-	return retval;
 }
 
-static int
-_request_firmware(const struct firmware **firmware_p, const char *name,
-		 struct device *device, int uevent, bool nowait)
+static int _request_firmware(const struct firmware **firmware_p,
+			     const char *name, struct device *device,
+			     bool uevent, bool nowait)
 {
-	struct device *f_dev;
 	struct firmware_priv *fw_priv;
 	struct firmware *firmware;
-	int retval;
+	int retval = 0;
 
 	if (!firmware_p)
 		return -EINVAL;
@@ -550,41 +537,40 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
 	if (uevent)
 		dev_dbg(device, "firmware: requesting %s\n", name);
 
-	retval = fw_setup_device(firmware, &f_dev, name, device,
-				 uevent, nowait);
-	if (retval)
-		goto error_kfree_fw;
-
-	fw_priv = dev_get_drvdata(f_dev);
+	fw_priv = fw_create_instance(firmware, name, device, uevent, nowait);
+	if (IS_ERR(fw_priv)) {
+		retval = PTR_ERR(fw_priv);
+		goto out;
+	}
 
 	if (uevent) {
-		if (loading_timeout > 0) {
-			fw_priv->timeout.expires = jiffies + loading_timeout * HZ;
-			add_timer(&fw_priv->timeout);
-		}
+		if (loading_timeout > 0)
+			mod_timer(&fw_priv->timeout,
+				  round_jiffies_up(jiffies +
+						   loading_timeout * HZ));
+
+		kobject_uevent(&fw_priv->dev.kobj, KOBJ_ADD);
+	}
+
+	wait_for_completion(&fw_priv->completion);
 
-		kobject_uevent(&f_dev->kobj, KOBJ_ADD);
-		wait_for_completion(&fw_priv->completion);
-		set_bit(FW_STATUS_DONE, &fw_priv->status);
-		del_timer_sync(&fw_priv->timeout);
-	} else
-		wait_for_completion(&fw_priv->completion);
+	set_bit(FW_STATUS_DONE, &fw_priv->status);
+	del_timer_sync(&fw_priv->timeout);
 
 	mutex_lock(&fw_lock);
-	if (!fw_priv->fw->size || test_bit(FW_STATUS_ABORT, &fw_priv->status)) {
+	if (!fw_priv->fw->size || test_bit(FW_STATUS_ABORT, &fw_priv->status))
 		retval = -ENOENT;
-		release_firmware(fw_priv->fw);
-		*firmware_p = NULL;
-	}
 	fw_priv->fw = NULL;
 	mutex_unlock(&fw_lock);
-	device_unregister(f_dev);
-	goto out;
 
-error_kfree_fw:
-	kfree(firmware);
-	*firmware_p = NULL;
+	fw_destroy_instance(fw_priv);
+
 out:
+	if (retval) {
+		release_firmware(firmware);
+		firmware_p = NULL;
+	}
+
 	return retval;
 }
 
@@ -635,23 +621,24 @@ struct firmware_work {
 	int uevent;
 };
 
-static int
-request_firmware_work_func(void *arg)
+static int request_firmware_work_func(void *arg)
 {
 	struct firmware_work *fw_work = arg;
 	const struct firmware *fw;
 	int ret;
+
 	if (!arg) {
 		WARN_ON(1);
 		return 0;
 	}
-	ret = _request_firmware(&fw, fw_work->name, fw_work->device,
-		fw_work->uevent, true);
 
+	ret = _request_firmware(&fw, fw_work->name, fw_work->device,
+				fw_work->uevent, true);
 	fw_work->cont(fw, fw_work->context);
 
 	module_put(fw_work->module);
 	kfree(fw_work);
+
 	return ret;
 }
 
@@ -679,34 +666,33 @@ request_firmware_nowait(
 	void (*cont)(const struct firmware *fw, void *context))
 {
 	struct task_struct *task;
-	struct firmware_work *fw_work = kmalloc(sizeof (struct firmware_work),
-						gfp);
+	struct firmware_work *fw_work;
 
+	fw_work = kzalloc(sizeof (struct firmware_work), gfp);
 	if (!fw_work)
 		return -ENOMEM;
+
+	fw_work->module = module;
+	fw_work->name = name;
+	fw_work->device = device;
+	fw_work->context = context;
+	fw_work->cont = cont;
+	fw_work->uevent = uevent;
+
 	if (!try_module_get(module)) {
 		kfree(fw_work);
 		return -EFAULT;
 	}
 
-	*fw_work = (struct firmware_work) {
-		.module = module,
-		.name = name,
-		.device = device,
-		.context = context,
-		.cont = cont,
-		.uevent = uevent,
-	};
-
 	task = kthread_run(request_firmware_work_func, fw_work,
 			    "firmware/%s", name);
-
 	if (IS_ERR(task)) {
 		fw_work->cont(NULL, fw_work->context);
 		module_put(fw_work->module);
 		kfree(fw_work);
 		return PTR_ERR(task);
 	}
+
 	return 0;
 }
 
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 2bdd8a94ec9..2872e86837b 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -66,8 +66,7 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 	struct sysinfo i;
 
 	si_meminfo_node(&i, nid);
-
-	n = sprintf(buf, "\n"
+	n = sprintf(buf,
 		       "Node %d MemTotal:       %8lu kB\n"
 		       "Node %d MemFree:        %8lu kB\n"
 		       "Node %d MemUsed:        %8lu kB\n"
@@ -78,13 +77,33 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       "Node %d Active(file):   %8lu kB\n"
 		       "Node %d Inactive(file): %8lu kB\n"
 		       "Node %d Unevictable:    %8lu kB\n"
-		       "Node %d Mlocked:        %8lu kB\n"
+		       "Node %d Mlocked:        %8lu kB\n",
+		       nid, K(i.totalram),
+		       nid, K(i.freeram),
+		       nid, K(i.totalram - i.freeram),
+		       nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
+				node_page_state(nid, NR_ACTIVE_FILE)),
+		       nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
+				node_page_state(nid, NR_INACTIVE_FILE)),
+		       nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
+		       nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
+		       nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
+		       nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
+		       nid, K(node_page_state(nid, NR_UNEVICTABLE)),
+		       nid, K(node_page_state(nid, NR_MLOCK)));
+
 #ifdef CONFIG_HIGHMEM
+	n += sprintf(buf + n,
 		       "Node %d HighTotal:      %8lu kB\n"
 		       "Node %d HighFree:       %8lu kB\n"
 		       "Node %d LowTotal:       %8lu kB\n"
-		       "Node %d LowFree:        %8lu kB\n"
+		       "Node %d LowFree:        %8lu kB\n",
+		       nid, K(i.totalhigh),
+		       nid, K(i.freehigh),
+		       nid, K(i.totalram - i.totalhigh),
+		       nid, K(i.freeram - i.freehigh));
 #endif
+	n += sprintf(buf + n,
 		       "Node %d Dirty:          %8lu kB\n"
 		       "Node %d Writeback:      %8lu kB\n"
 		       "Node %d FilePages:      %8lu kB\n"
@@ -99,25 +118,6 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       "Node %d Slab:           %8lu kB\n"
 		       "Node %d SReclaimable:   %8lu kB\n"
 		       "Node %d SUnreclaim:     %8lu kB\n",
-		       nid, K(i.totalram),
-		       nid, K(i.freeram),
-		       nid, K(i.totalram - i.freeram),
-		       nid, K(node_page_state(nid, NR_ACTIVE_ANON) +
-				node_page_state(nid, NR_ACTIVE_FILE)),
-		       nid, K(node_page_state(nid, NR_INACTIVE_ANON) +
-				node_page_state(nid, NR_INACTIVE_FILE)),
-		       nid, K(node_page_state(nid, NR_ACTIVE_ANON)),
-		       nid, K(node_page_state(nid, NR_INACTIVE_ANON)),
-		       nid, K(node_page_state(nid, NR_ACTIVE_FILE)),
-		       nid, K(node_page_state(nid, NR_INACTIVE_FILE)),
-		       nid, K(node_page_state(nid, NR_UNEVICTABLE)),
-		       nid, K(node_page_state(nid, NR_MLOCK)),
-#ifdef CONFIG_HIGHMEM
-		       nid, K(i.totalhigh),
-		       nid, K(i.freehigh),
-		       nid, K(i.totalram - i.totalhigh),
-		       nid, K(i.freeram - i.freehigh),
-#endif
 		       nid, K(node_page_state(nid, NR_FILE_DIRTY)),
 		       nid, K(node_page_state(nid, NR_WRITEBACK)),
 		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 4d99c8bdfed..c6c933f5810 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -12,6 +12,7 @@
 
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/of_device.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
@@ -191,13 +192,13 @@ int platform_device_add_resources(struct platform_device *pdev,
 {
 	struct resource *r;
 
-	r = kmalloc(sizeof(struct resource) * num, GFP_KERNEL);
+	r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
 	if (r) {
-		memcpy(r, res, sizeof(struct resource) * num);
 		pdev->resource = r;
 		pdev->num_resources = num;
+		return 0;
 	}
-	return r ? 0 : -ENOMEM;
+	return -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(platform_device_add_resources);
 
@@ -344,108 +345,56 @@ void platform_device_unregister(struct platform_device *pdev)
 EXPORT_SYMBOL_GPL(platform_device_unregister);
 
 /**
- * platform_device_register_simple - add a platform-level device and its resources
- * @name: base name of the device we're adding
- * @id: instance id
- * @res: set of resources that needs to be allocated for the device
- * @num: number of resources
+ * platform_device_register_resndata - add a platform-level device with
+ * resources and platform-specific data
  *
- * This function creates a simple platform device that requires minimal
- * resource and memory management. Canned release function freeing memory
- * allocated for the device allows drivers using such devices to be
- * unloaded without waiting for the last reference to the device to be
- * dropped.
- *
- * This interface is primarily intended for use with legacy drivers which
- * probe hardware directly.  Because such drivers create sysfs device nodes
- * themselves, rather than letting system infrastructure handle such device
- * enumeration tasks, they don't fully conform to the Linux driver model.
- * In particular, when such drivers are built as modules, they can't be
- * "hotplugged".
- *
- * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
- */
-struct platform_device *platform_device_register_simple(const char *name,
-							int id,
-							const struct resource *res,
-							unsigned int num)
-{
-	struct platform_device *pdev;
-	int retval;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev) {
-		retval = -ENOMEM;
-		goto error;
-	}
-
-	if (num) {
-		retval = platform_device_add_resources(pdev, res, num);
-		if (retval)
-			goto error;
-	}
-
-	retval = platform_device_add(pdev);
-	if (retval)
-		goto error;
-
-	return pdev;
-
-error:
-	platform_device_put(pdev);
-	return ERR_PTR(retval);
-}
-EXPORT_SYMBOL_GPL(platform_device_register_simple);
-
-/**
- * platform_device_register_data - add a platform-level device with platform-specific data
  * @parent: parent device for the device we're adding
  * @name: base name of the device we're adding
  * @id: instance id
+ * @res: set of resources that needs to be allocated for the device
+ * @num: number of resources
  * @data: platform specific data for this platform device
  * @size: size of platform specific data
  *
- * This function creates a simple platform device that requires minimal
- * resource and memory management. Canned release function freeing memory
- * allocated for the device allows drivers using such devices to be
- * unloaded without waiting for the last reference to the device to be
- * dropped.
- *
  * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
  */
-struct platform_device *platform_device_register_data(
+struct platform_device *__init_or_module platform_device_register_resndata(
 		struct device *parent,
 		const char *name, int id,
+		const struct resource *res, unsigned int num,
 		const void *data, size_t size)
 {
+	int ret = -ENOMEM;
 	struct platform_device *pdev;
-	int retval;
 
 	pdev = platform_device_alloc(name, id);
-	if (!pdev) {
-		retval = -ENOMEM;
-		goto error;
-	}
+	if (!pdev)
+		goto err;
 
 	pdev->dev.parent = parent;
 
-	if (size) {
-		retval = platform_device_add_data(pdev, data, size);
-		if (retval)
-			goto error;
+	if (res) {
+		ret = platform_device_add_resources(pdev, res, num);
+		if (ret)
+			goto err;
 	}
 
-	retval = platform_device_add(pdev);
-	if (retval)
-		goto error;
+	if (data) {
+		ret = platform_device_add_data(pdev, data, size);
+		if (ret)
+			goto err;
+	}
 
-	return pdev;
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
 
-error:
-	platform_device_put(pdev);
-	return ERR_PTR(retval);
+	return pdev;
 }
-EXPORT_SYMBOL_GPL(platform_device_register_data);
+EXPORT_SYMBOL_GPL(platform_device_register_resndata);
 
 static int platform_drv_probe(struct device *_dev)
 {
@@ -635,6 +584,12 @@ static struct device_attribute platform_dev_attrs[] = {
 static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct platform_device	*pdev = to_platform_device(dev);
+	int rc;
+
+	/* Some devices have extra OF data and an OF-style MODALIAS */
+	rc = of_device_uevent(dev,env);
+	if (rc != -ENODEV)
+		return rc;
 
 	add_uevent_var(env, "MODALIAS=%s%s", PLATFORM_MODULE_PREFIX,
 		(pdev->id_entry) ? pdev->id_entry->name : pdev->name);
@@ -673,7 +628,11 @@ static int platform_match(struct device *dev, struct device_driver *drv)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct platform_driver *pdrv = to_platform_driver(drv);
 
-	/* match against the id table first */
+	/* Attempt an OF style match first */
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
+	/* Then try to match against the id table */
 	if (pdrv->id_table)
 		return platform_match_id(pdrv->id_table, pdev) != NULL;
 
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 258bc2ae288..23b7c48df84 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -225,16 +225,6 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
 	struct gendisk *disk = bdev->bd_disk;
 	struct virtio_blk *vblk = disk->private_data;
 
-	if (cmd == 0x56424944) { /* 'VBID' */
-		void __user *usr_data = (void __user *)data;
-		char id_str[VIRTIO_BLK_ID_BYTES];
-		int err;
-
-		err = virtblk_get_id(disk, id_str);
-		if (!err && copy_to_user(usr_data, id_str, VIRTIO_BLK_ID_BYTES))
-			err = -EFAULT;
-		return err;
-	}
 	/*
 	 * Only allow the generic SCSI ioctls if the host can support it.
 	 */
@@ -281,6 +271,27 @@ static int index_to_minor(int index)
 	return index << PART_BITS;
 }
 
+static ssize_t virtblk_serial_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct gendisk *disk = dev_to_disk(dev);
+	int err;
+
+	/* sysfs gives us a PAGE_SIZE buffer */
+	BUILD_BUG_ON(PAGE_SIZE < VIRTIO_BLK_ID_BYTES);
+
+	buf[VIRTIO_BLK_ID_BYTES] = '\0';
+	err = virtblk_get_id(disk, buf);
+	if (!err)
+		return strlen(buf);
+
+	if (err == -EIO) /* Unsupported? Make it empty. */
+		return 0;
+
+	return err;
+}
+DEVICE_ATTR(serial, S_IRUGO, virtblk_serial_show, NULL);
+
 static int __devinit virtblk_probe(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk;
@@ -366,12 +377,32 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 	vblk->disk->driverfs_dev = &vdev->dev;
 	index++;
 
-	/* If barriers are supported, tell block layer that queue is ordered */
-	if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
+	if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) {
+		/*
+		 * If the FLUSH feature is supported we do have support for
+		 * flushing a volatile write cache on the host.  Use that
+		 * to implement write barrier support.
+		 */
 		blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
 				  virtblk_prepare_flush);
-	else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
+	} else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) {
+		/*
+		 * If the BARRIER feature is supported the host expects us
+		 * to order request by tags.  This implies there is not
+		 * volatile write cache on the host, and that the host
+		 * never re-orders outstanding I/O.  This feature is not
+		 * useful for real life scenarious and deprecated.
+		 */
 		blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
+	} else {
+		/*
+		 * If the FLUSH feature is not supported we must assume that
+		 * the host does not perform any kind of volatile write
+		 * caching. We still need to drain the queue to provider
+		 * proper barrier semantics.
+		 */
+		blk_queue_ordered(q, QUEUE_ORDERED_DRAIN, NULL);
+	}
 
 	/* If disk is read-only in the host, the guest should obey */
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
@@ -445,8 +476,15 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
 
 
 	add_disk(vblk->disk);
+	err = device_create_file(disk_to_dev(vblk->disk), &dev_attr_serial);
+	if (err)
+		goto out_del_disk;
+
 	return 0;
 
+out_del_disk:
+	del_gendisk(vblk->disk);
+	blk_cleanup_queue(vblk->disk->queue);
 out_put_disk:
 	put_disk(vblk->disk);
 out_mempool:
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 82ed403147c..f63ac3d1f8a 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -48,6 +48,7 @@
 #include <xen/grant_table.h>
 #include <xen/events.h>
 #include <xen/page.h>
+#include <xen/platform_pci.h>
 
 #include <xen/interface/grant_table.h>
 #include <xen/interface/io/blkif.h>
@@ -737,6 +738,35 @@ static int blkfront_probe(struct xenbus_device *dev,
 		}
 	}
 
+	if (xen_hvm_domain()) {
+		char *type;
+		int len;
+		/* no unplug has been done: do not hook devices != xen vbds */
+		if (xen_platform_pci_unplug & XEN_UNPLUG_IGNORE) {
+			int major;
+
+			if (!VDEV_IS_EXTENDED(vdevice))
+				major = BLKIF_MAJOR(vdevice);
+			else
+				major = XENVBD_MAJOR;
+
+			if (major != XENVBD_MAJOR) {
+				printk(KERN_INFO
+						"%s: HVM does not support vbd %d as xen block device\n",
+						__FUNCTION__, vdevice);
+				return -ENODEV;
+			}
+		}
+		/* do not create a PV cdrom device if we are an HVM guest */
+		type = xenbus_read(XBT_NIL, dev->nodename, "device-type", &len);
+		if (IS_ERR(type))
+			return -ENODEV;
+		if (strncmp(type, "cdrom", 5) == 0) {
+			kfree(type);
+			return -ENODEV;
+		}
+		kfree(type);
+	}
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure");
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index 6d34f405a2f..d52e90a5a61 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -39,7 +39,6 @@
 #include <linux/skbuff.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -160,7 +159,7 @@ static void bluecard_detach(struct pcmcia_device *p_dev);
 static void bluecard_activity_led_timeout(u_long arg)
 {
 	bluecard_info_t *info = (bluecard_info_t *)arg;
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 
 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
 		return;
@@ -177,7 +176,7 @@ static void bluecard_activity_led_timeout(u_long arg)
 
 static void bluecard_enable_activity_led(bluecard_info_t *info)
 {
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 
 	if (!test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
 		return;
@@ -233,7 +232,7 @@ static void bluecard_write_wakeup(bluecard_info_t *info)
 	}
 
 	do {
-		register unsigned int iobase = info->p_dev->io.BasePort1;
+		register unsigned int iobase = info->p_dev->resource[0]->start;
 		register unsigned int offset;
 		register unsigned char command;
 		register unsigned long ready_bit;
@@ -380,7 +379,7 @@ static void bluecard_receive(bluecard_info_t *info, unsigned int offset)
 		return;
 	}
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	if (test_bit(XMIT_SENDING_READY, &(info->tx_state)))
 		bluecard_enable_activity_led(info);
@@ -509,7 +508,7 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst)
 	if (!test_bit(CARD_READY, &(info->hw_state)))
 		return IRQ_HANDLED;
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	spin_lock(&(info->lock));
 
@@ -623,7 +622,7 @@ static int bluecard_hci_flush(struct hci_dev *hdev)
 static int bluecard_hci_open(struct hci_dev *hdev)
 {
 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 
 	if (test_bit(CARD_HAS_PCCARD_ID, &(info->hw_state)))
 		bluecard_hci_set_baud_rate(hdev, DEFAULT_BAUD_RATE);
@@ -643,7 +642,7 @@ static int bluecard_hci_open(struct hci_dev *hdev)
 static int bluecard_hci_close(struct hci_dev *hdev)
 {
 	bluecard_info_t *info = (bluecard_info_t *)(hdev->driver_data);
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 
 	if (!test_and_clear_bit(HCI_RUNNING, &(hdev->flags)))
 		return 0;
@@ -710,7 +709,7 @@ static int bluecard_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned l
 
 static int bluecard_open(bluecard_info_t *info)
 {
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev;
 	unsigned char id;
 
@@ -829,7 +828,7 @@ static int bluecard_open(bluecard_info_t *info)
 
 static int bluecard_close(bluecard_info_t *info)
 {
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev = info->hdev;
 
 	if (!hdev)
@@ -866,9 +865,6 @@ static int bluecard_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.NumPorts1 = 8;
-
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -891,12 +887,14 @@ static int bluecard_config(struct pcmcia_device *link)
 	int i, n;
 
 	link->conf.ConfigIndex = 0x20;
-	link->io.NumPorts1 = 64;
-	link->io.IOAddrLines = 6;
+
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 64;
+	link->io_lines = 6;
 
 	for (n = 0; n < 0x400; n += 0x40) {
-		link->io.BasePort1 = n ^ 0x300;
-		i = pcmcia_request_io(link, &link->io);
+		link->resource[0]->start = n ^ 0x300;
+		i = pcmcia_request_io(link);
 		if (i == 0)
 			break;
 	}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 21e05fdc912..7ab8f29d5e0 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -45,7 +45,6 @@
 #include <linux/device.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -189,7 +188,7 @@ static void bt3c_write_wakeup(bt3c_info_t *info)
 		return;
 
 	do {
-		register unsigned int iobase = info->p_dev->io.BasePort1;
+		register unsigned int iobase = info->p_dev->resource[0]->start;
 		register struct sk_buff *skb;
 		register int len;
 
@@ -227,7 +226,7 @@ static void bt3c_receive(bt3c_info_t *info)
 		return;
 	}
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	avail = bt3c_read(iobase, 0x7006);
 	//printk("bt3c_cs: receiving %d bytes\n", avail);
@@ -348,7 +347,7 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 		/* our irq handler is shared */
 		return IRQ_NONE;
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	spin_lock(&(info->lock));
 
@@ -481,7 +480,7 @@ static int bt3c_load_firmware(bt3c_info_t *info, const unsigned char *firmware,
 	unsigned int iobase, size, addr, fcs, tmp;
 	int i, err = 0;
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	/* Reset */
 	bt3c_io_write(iobase, 0x8040, 0x0404);
@@ -658,8 +657,8 @@ static int bt3c_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.NumPorts1 = 8;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -684,14 +683,14 @@ static int bt3c_check_config(struct pcmcia_device *p_dev,
 {
 	unsigned long try = (unsigned long) priv_data;
 
+	p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
 	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 	    (cf->io.win[0].base != 0)) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.IOAddrLines = (try == 0) ? 16 :
-			cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -708,9 +707,9 @@ static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 		for (j = 0; j < 5; j++) {
-			p_dev->io.BasePort1 = base[j];
-			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[0]->start = base[j];
+			p_dev->io_lines = base[j] ? 16 : 3;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 4ed7288f99d..1c4f5e863b0 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -41,7 +41,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -143,7 +142,7 @@ static void btuart_write_wakeup(btuart_info_t *info)
 	}
 
 	do {
-		register unsigned int iobase = info->p_dev->io.BasePort1;
+		register unsigned int iobase = info->p_dev->resource[0]->start;
 		register struct sk_buff *skb;
 		register int len;
 
@@ -184,7 +183,7 @@ static void btuart_receive(btuart_info_t *info)
 		return;
 	}
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	do {
 		info->hdev->stat.byte_rx++;
@@ -298,7 +297,7 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 		/* our irq handler is shared */
 		return IRQ_NONE;
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	spin_lock(&(info->lock));
 
@@ -355,7 +354,7 @@ static void btuart_change_speed(btuart_info_t *info, unsigned int speed)
 		return;
 	}
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	spin_lock_irqsave(&(info->lock), flags);
 
@@ -479,7 +478,7 @@ static int btuart_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned lon
 static int btuart_open(btuart_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev;
 
 	spin_lock_init(&(info->lock));
@@ -549,7 +548,7 @@ static int btuart_open(btuart_info_t *info)
 static int btuart_close(btuart_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev = info->hdev;
 
 	if (!hdev)
@@ -587,8 +586,8 @@ static int btuart_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.NumPorts1 = 8;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -613,14 +612,14 @@ static int btuart_check_config(struct pcmcia_device *p_dev,
 {
 	int *try = priv_data;
 
+	p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
 	if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
 	    (cf->io.win[0].base != 0)) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.IOAddrLines = (*try == 0) ? 16 :
-			cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -637,9 +636,9 @@ static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 		for (j = 0; j < 5; j++) {
-			p_dev->io.BasePort1 = base[j];
-			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[0]->start = base[j];
+			p_dev->io_lines = base[j] ? 16 : 3;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index cbe9e44a42e..db7c8db695f 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -41,7 +41,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -150,7 +149,7 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
 	}
 
 	do {
-		register unsigned int iobase = info->p_dev->io.BasePort1;
+		register unsigned int iobase = info->p_dev->resource[0]->start;
 		register struct sk_buff *skb;
 		register int len;
 
@@ -215,7 +214,7 @@ static void dtl1_receive(dtl1_info_t *info)
 		return;
 	}
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	do {
 		info->hdev->stat.byte_rx++;
@@ -302,7 +301,7 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 		/* our irq handler is shared */
 		return IRQ_NONE;
 
-	iobase = info->p_dev->io.BasePort1;
+	iobase = info->p_dev->resource[0]->start;
 
 	spin_lock(&(info->lock));
 
@@ -462,7 +461,7 @@ static int dtl1_hci_ioctl(struct hci_dev *hdev, unsigned int cmd,  unsigned long
 static int dtl1_open(dtl1_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev;
 
 	spin_lock_init(&(info->lock));
@@ -509,7 +508,8 @@ static int dtl1_open(dtl1_info_t *info)
 	outb(UART_LCR_WLEN8, iobase + UART_LCR);	/* Reset DLAB */
 	outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR);
 
-	info->ri_latch = inb(info->p_dev->io.BasePort1 + UART_MSR) & UART_MSR_RI;
+	info->ri_latch = inb(info->p_dev->resource[0]->start + UART_MSR)
+				& UART_MSR_RI;
 
 	/* Turn on interrupts */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
@@ -534,7 +534,7 @@ static int dtl1_open(dtl1_info_t *info)
 static int dtl1_close(dtl1_info_t *info)
 {
 	unsigned long flags;
-	unsigned int iobase = info->p_dev->io.BasePort1;
+	unsigned int iobase = info->p_dev->resource[0]->start;
 	struct hci_dev *hdev = info->hdev;
 
 	if (!hdev)
@@ -572,8 +572,8 @@ static int dtl1_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.NumPorts1 = 8;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -597,14 +597,13 @@ static int dtl1_confcheck(struct pcmcia_device *p_dev,
 			  unsigned int vcc,
 			  void *priv_data)
 {
-	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.NumPorts1 = cf->io.win[0].len;	/*yo */
-		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
-			return 0;
-	}
-	return -ENODEV;
+	if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8))
+		return -ENODEV;
+
+	p_dev->resource[0]->start = cf->io.win[0].base;
+	p_dev->resource[0]->end = cf->io.win[0].len;	/*yo */
+	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	return pcmcia_request_io(p_dev);
 }
 
 static int dtl1_config(struct pcmcia_device *link)
@@ -613,7 +612,7 @@ static int dtl1_config(struct pcmcia_device *link)
 	int i;
 
 	/* Look for a generic full-sized window */
-	link->io.NumPorts1 = 8;
+	link->resource[0]->end = 8;
 	if (pcmcia_loop_config(link, dtl1_confcheck, NULL) < 0)
 		goto failed;
 
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 88d6eac6975..273cee1cc77 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
+obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index aa109cbe0e6..d607f53d8af 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -372,6 +372,17 @@ static int __devinit agp_efficeon_probe(struct pci_dev *pdev,
 	bridge->capndx = cap_ptr;
 
 	/*
+	* If the device has not been properly setup, the following will catch
+	* the problem and should stop the system from crashing.
+	* 20030610 - hamish@zot.org
+	*/
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR PFX "Unable to Enable PCI device\n");
+		agp_put_bridge(bridge);
+		return -ENODEV;
+	}
+
+	/*
 	* The following fixes the case where the BIOS has "forgotten" to
 	* provide an address range for the GART.
 	* 20030610 - hamish@zot.org
@@ -385,17 +396,6 @@ static int __devinit agp_efficeon_probe(struct pci_dev *pdev,
 		}
 	}
 
-	/*
-	* If the device has not been properly setup, the following will catch
-	* the problem and should stop the system from crashing.
-	* 20030610 - hamish@zot.org
-	*/
-	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR PFX "Unable to Enable PCI device\n");
-		agp_put_bridge(bridge);
-		return -ENODEV;
-	}
-
 	/* Fill in the mode register */
 	if (cap_ptr) {
 		pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index d836a71bf06..ddf5def1b0d 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -816,9 +816,9 @@ static const struct intel_driver_description {
 	{ PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG,
 	    "HD Graphics", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB, PCI_DEVICE_ID_INTEL_SANDYBRIDGE_IG,
-	    "Sandybridge", NULL, &intel_i965_driver },
+	    "Sandybridge", NULL, &intel_gen6_driver },
 	{ PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB, PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_IG,
-	    "Sandybridge", NULL, &intel_i965_driver },
+	    "Sandybridge", NULL, &intel_gen6_driver },
 	{ 0, 0, NULL, NULL, NULL }
 };
 
@@ -908,6 +908,17 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
 	/*
+	* If the device has not been properly setup, the following will catch
+	* the problem and should stop the system from crashing.
+	* 20030610 - hamish@zot.org
+	*/
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "can't enable PCI device\n");
+		agp_put_bridge(bridge);
+		return -ENODEV;
+	}
+
+	/*
 	* The following fixes the case where the BIOS has "forgotten" to
 	* provide an address range for the GART.
 	* 20030610 - hamish@zot.org
@@ -921,17 +932,6 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 		}
 	}
 
-	/*
-	* If the device has not been properly setup, the following will catch
-	* the problem and should stop the system from crashing.
-	* 20030610 - hamish@zot.org
-	*/
-	if (pci_enable_device(pdev)) {
-		dev_err(&pdev->dev, "can't enable PCI device\n");
-		agp_put_bridge(bridge);
-		return -ENODEV;
-	}
-
 	/* Fill in the mode register */
 	if (cap_ptr) {
 		pci_read_config_dword(pdev,
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index 2547465d465..c05e3e51826 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -60,6 +60,12 @@
 #define I810_PTE_LOCAL		0x00000002
 #define I810_PTE_VALID		0x00000001
 #define I830_PTE_SYSTEM_CACHED  0x00000006
+/* GT PTE cache control fields */
+#define GEN6_PTE_UNCACHED	0x00000002
+#define GEN6_PTE_LLC		0x00000004
+#define GEN6_PTE_LLC_MLC	0x00000006
+#define GEN6_PTE_GFDT		0x00000008
+
 #define I810_SMRAM_MISCC	0x70
 #define I810_GFX_MEM_WIN_SIZE	0x00010000
 #define I810_GFX_MEM_WIN_32M	0x00010000
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index a7547150a70..d22ffb811bf 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -25,6 +25,10 @@
 #define USE_PCI_DMA_API 1
 #endif
 
+/* Max amount of stolen space, anything above will be returned to Linux */
+int intel_max_stolen = 32 * 1024 * 1024;
+EXPORT_SYMBOL(intel_max_stolen);
+
 static const struct aper_size_info_fixed intel_i810_sizes[] =
 {
 	{64, 16384, 4},
@@ -104,7 +108,7 @@ static int intel_agp_map_memory(struct agp_memory *mem)
 	DBG("try mapping %lu pages\n", (unsigned long)mem->page_count);
 
 	if (sg_alloc_table(&st, mem->page_count, GFP_KERNEL))
-		return -ENOMEM;
+		goto err;
 
 	mem->sg_list = sg = st.sgl;
 
@@ -113,11 +117,14 @@ static int intel_agp_map_memory(struct agp_memory *mem)
 
 	mem->num_sg = pci_map_sg(intel_private.pcidev, mem->sg_list,
 				 mem->page_count, PCI_DMA_BIDIRECTIONAL);
-	if (unlikely(!mem->num_sg)) {
-		intel_agp_free_sglist(mem);
-		return -ENOMEM;
-	}
+	if (unlikely(!mem->num_sg))
+		goto err;
+
 	return 0;
+
+err:
+	sg_free_table(&st);
+	return -ENOMEM;
 }
 
 static void intel_agp_unmap_memory(struct agp_memory *mem)
@@ -176,7 +183,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem,
 	if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB ||
 	    agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB)
 	{
-		cache_bits = I830_PTE_SYSTEM_CACHED;
+		cache_bits = GEN6_PTE_LLC_MLC;
 	}
 
 	for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
@@ -710,7 +717,12 @@ static void intel_i830_init_gtt_entries(void)
 			break;
 		}
 	}
-	if (gtt_entries > 0) {
+	if (!local && gtt_entries > intel_max_stolen) {
+		dev_info(&agp_bridge->dev->dev,
+			 "detected %dK stolen memory, trimming to %dK\n",
+			 gtt_entries / KB(1), intel_max_stolen / KB(1));
+		gtt_entries = intel_max_stolen / KB(4);
+	} else if (gtt_entries > 0) {
 		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
 		gtt_entries /= KB(4);
@@ -797,6 +809,10 @@ static int intel_i830_create_gatt_table(struct agp_bridge_data *bridge)
 
 	/* we have to call this as early as possible after the MMIO base address is known */
 	intel_i830_init_gtt_entries();
+	if (intel_private.gtt_entries == 0) {
+		iounmap(intel_private.registers);
+		return -ENOMEM;
+	}
 
 	agp_bridge->gatt_table = NULL;
 
@@ -1282,6 +1298,11 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge)
 
 	/* we have to call this as early as possible after the MMIO base address is known */
 	intel_i830_init_gtt_entries();
+	if (intel_private.gtt_entries == 0) {
+		iounmap(intel_private.gtt);
+		iounmap(intel_private.registers);
+		return -ENOMEM;
+	}
 
 	agp_bridge->gatt_table = NULL;
 
@@ -1309,6 +1330,16 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge,
 	return addr | bridge->driver->masks[type].mask;
 }
 
+static unsigned long intel_gen6_mask_memory(struct agp_bridge_data *bridge,
+					    dma_addr_t addr, int type)
+{
+	/* Shift high bits down */
+	addr |= (addr >> 28) & 0xff;
+
+	/* Type checking must be done elsewhere */
+	return addr | bridge->driver->masks[type].mask;
+}
+
 static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
 {
 	u16 snb_gmch_ctl;
@@ -1390,6 +1421,11 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge)
 
 	/* we have to call this as early as possible after the MMIO base address is known */
 	intel_i830_init_gtt_entries();
+	if (intel_private.gtt_entries == 0) {
+		iounmap(intel_private.gtt);
+		iounmap(intel_private.registers);
+		return -ENOMEM;
+	}
 
 	agp_bridge->gatt_table = NULL;
 
@@ -1517,6 +1553,39 @@ static const struct agp_bridge_driver intel_i965_driver = {
 #endif
 };
 
+static const struct agp_bridge_driver intel_gen6_driver = {
+	.owner			= THIS_MODULE,
+	.aperture_sizes		= intel_i830_sizes,
+	.size_type		= FIXED_APER_SIZE,
+	.num_aperture_sizes	= 4,
+	.needs_scratch_page	= true,
+	.configure		= intel_i9xx_configure,
+	.fetch_size		= intel_i9xx_fetch_size,
+	.cleanup		= intel_i915_cleanup,
+	.mask_memory		= intel_gen6_mask_memory,
+	.masks			= intel_i810_masks,
+	.agp_enable		= intel_i810_agp_enable,
+	.cache_flush		= global_cache_flush,
+	.create_gatt_table	= intel_i965_create_gatt_table,
+	.free_gatt_table	= intel_i830_free_gatt_table,
+	.insert_memory		= intel_i915_insert_entries,
+	.remove_memory		= intel_i915_remove_entries,
+	.alloc_by_type		= intel_i830_alloc_by_type,
+	.free_by_type		= intel_i810_free_by_type,
+	.agp_alloc_page		= agp_generic_alloc_page,
+	.agp_alloc_pages        = agp_generic_alloc_pages,
+	.agp_destroy_page	= agp_generic_destroy_page,
+	.agp_destroy_pages      = agp_generic_destroy_pages,
+	.agp_type_to_mask_type	= intel_i830_type_to_mask_type,
+	.chipset_flush		= intel_i915_chipset_flush,
+#ifdef USE_PCI_DMA_API
+	.agp_map_page		= intel_agp_map_page,
+	.agp_unmap_page		= intel_agp_unmap_page,
+	.agp_map_memory		= intel_agp_map_memory,
+	.agp_unmap_memory	= intel_agp_unmap_memory,
+#endif
+};
+
 static const struct agp_bridge_driver intel_g33_driver = {
 	.owner			= THIS_MODULE,
 	.aperture_sizes		= intel_i830_sizes,
diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 89d871ef8c2..91917133ae0 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -23,6 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/cdev.h>
 #include <linux/list.h>
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 35cca4c7fb1..fa27d1676ee 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -194,7 +194,7 @@ static int __init hvc_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct console hvc_con_driver = {
+static struct console hvc_console = {
 	.name		= "hvc",
 	.write		= hvc_console_print,
 	.device		= hvc_console_device,
@@ -220,7 +220,7 @@ static struct console hvc_con_driver = {
  */
 static int __init hvc_console_init(void)
 {
-	register_console(&hvc_con_driver);
+	register_console(&hvc_console);
 	return 0;
 }
 console_initcall(hvc_console_init);
@@ -276,8 +276,8 @@ int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops)
 	 * now (setup won't fail at this point).  It's ok to just
 	 * call register again if previously .setup failed.
 	 */
-	if (index == hvc_con_driver.index)
-		register_console(&hvc_con_driver);
+	if (index == hvc_console.index)
+		register_console(&hvc_console);
 
 	return 0;
 }
@@ -641,7 +641,7 @@ int hvc_poll(struct hvc_struct *hp)
 		}
 		for (i = 0; i < n; ++i) {
 #ifdef CONFIG_MAGIC_SYSRQ
-			if (hp->index == hvc_con_driver.index) {
+			if (hp->index == hvc_console.index) {
 				/* Handle the SysRq Hack */
 				/* XXX should support a sequence */
 				if (buf[i] == '\x0f') {	/* ^O */
@@ -909,7 +909,7 @@ static void __exit hvc_exit(void)
 		tty_unregister_driver(hvc_driver);
 		/* return tty_struct instances allocated in hvc_init(). */
 		put_tty_driver(hvc_driver);
-		unregister_console(&hvc_con_driver);
+		unregister_console(&hvc_console);
 	}
 }
 module_exit(hvc_exit);
diff --git a/drivers/char/hvc_tile.c b/drivers/char/hvc_tile.c
new file mode 100644
index 00000000000..c4efb55cbc0
--- /dev/null
+++ b/drivers/char/hvc_tile.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Tilera TILE Processor hypervisor console
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <hv/hypervisor.h>
+
+#include "hvc_console.h"
+
+static int hvc_tile_put_chars(uint32_t vt, const char *buf, int count)
+{
+	return hv_console_write((HV_VirtAddr)buf, count);
+}
+
+static int hvc_tile_get_chars(uint32_t vt, char *buf, int count)
+{
+	int i, c;
+
+	for (i = 0; i < count; ++i) {
+		c = hv_console_read_if_ready();
+		if (c < 0)
+			break;
+		buf[i] = c;
+	}
+
+	return i;
+}
+
+static const struct hv_ops hvc_tile_get_put_ops = {
+	.get_chars = hvc_tile_get_chars,
+	.put_chars = hvc_tile_put_chars,
+};
+
+static int __init hvc_tile_console_init(void)
+{
+	extern void disable_early_printk(void);
+	hvc_instantiate(0, 0, &hvc_tile_get_put_ops);
+	add_preferred_console("hvc", 0, NULL);
+	disable_early_printk();
+	return 0;
+}
+console_initcall(hvc_tile_console_init);
+
+static int __init hvc_tile_init(void)
+{
+	hvc_alloc(0, 0, &hvc_tile_get_put_ops, 128);
+	return 0;
+}
+device_initcall(hvc_tile_init);
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index d4b14ff1c4c..1f4b6de65a2 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -1255,7 +1255,7 @@ static int __init hvsi_console_setup(struct console *console, char *options)
 	return 0;
 }
 
-static struct console hvsi_con_driver = {
+static struct console hvsi_console = {
 	.name		= "hvsi",
 	.write		= hvsi_console_print,
 	.device		= hvsi_console_device,
@@ -1308,7 +1308,7 @@ static int __init hvsi_console_init(void)
 	}
 
 	if (hvsi_count)
-		register_console(&hvsi_con_driver);
+		register_console(&hvsi_console);
 	return 0;
 }
 console_initcall(hvsi_console_init);
diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c
index 101d5f23554..7a4f080f835 100644
--- a/drivers/char/hw_random/n2-drv.c
+++ b/drivers/char/hw_random/n2-drv.c
@@ -762,12 +762,12 @@ static struct of_platform_driver n2rng_driver = {
 
 static int __init n2rng_init(void)
 {
-	return of_register_driver(&n2rng_driver, &of_bus_type);
+	return of_register_platform_driver(&n2rng_driver);
 }
 
 static void __exit n2rng_exit(void)
 {
-	of_unregister_driver(&n2rng_driver);
+	of_unregister_platform_driver(&n2rng_driver);
 }
 
 module_init(n2rng_init);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 094bdc355b1..ff68e7c34ce 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2176,6 +2176,14 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
 	info->io.addr_data = res->start;
 
 	info->io.regspacing = DEFAULT_REGSPACING;
+	res = pnp_get_resource(dev,
+			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+					IORESOURCE_IO : IORESOURCE_MEM,
+			       1);
+	if (res) {
+		if (res->start > info->io.addr_data)
+			info->io.regspacing = res->start - info->io.addr_data;
+	}
 	info->io.regsize = DEFAULT_REGSPACING;
 	info->io.regshift = 0;
 
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index f54dab8acdc..a398ecdbd75 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -916,7 +916,7 @@ static int __init chr_dev_init(void)
 			      NULL, devlist[minor].name);
 	}
 
-	return 0;
+	return tty_init();
 }
 
 fs_initcall(chr_dev_init);
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index cd650ca8c67..abdafd48898 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -242,7 +242,7 @@ int misc_deregister(struct miscdevice *misc)
 {
 	int i = DYNAMIC_MINORS - misc->minor - 1;
 
-	if (list_empty(&misc->list))
+	if (WARN_ON(list_empty(&misc->list)))
 		return -EINVAL;
 
 	mutex_lock(&misc_mtx);
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index e7956acf2ad..ec73d9f6d9e 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -34,7 +34,6 @@
 #include <linux/uaccess.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -422,7 +421,7 @@ static struct card_fixup card_fixups[] = {
 static void set_cardparameter(struct cm4000_dev *dev)
 {
 	int i;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 	u_int8_t stopbits = 0x02; /* ISO default */
 
 	DEBUGP(3, dev, "-> set_cardparameter\n");
@@ -455,7 +454,7 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 	unsigned short num_bytes_read;
 	unsigned char pts_reply[4];
 	ssize_t rc;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 
 	rc = 0;
 
@@ -664,7 +663,7 @@ static void terminate_monitor(struct cm4000_dev *dev)
 static void monitor_card(unsigned long p)
 {
 	struct cm4000_dev *dev = (struct cm4000_dev *) p;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 	unsigned short s;
 	struct ptsreq ptsreq;
 	int i, atrc;
@@ -925,7 +924,7 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
 			loff_t *ppos)
 {
 	struct cm4000_dev *dev = filp->private_data;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 	ssize_t rc;
 	int i, j, k;
 
@@ -1048,7 +1047,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	struct cm4000_dev *dev = filp->private_data;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 	unsigned short s;
 	unsigned char tmp;
 	unsigned char infolen;
@@ -1401,7 +1400,7 @@ static void stop_monitor(struct cm4000_dev *dev)
 static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	struct cm4000_dev *dev = filp->private_data;
-	unsigned int iobase = dev->p_dev->io.BasePort1;
+	unsigned int iobase = dev->p_dev->resource[0]->start;
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	struct pcmcia_device *link;
 	int size;
@@ -1752,17 +1751,12 @@ static int cm4000_config_check(struct pcmcia_device *p_dev,
 	if (!cfg->io.nwin)
 		return -ENODEV;
 
-	/* Get the IOaddr */
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	if (!(cfg->io.flags & CISTPL_IO_8BIT))
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	if (!(cfg->io.flags & CISTPL_IO_16BIT))
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
+	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+	return pcmcia_request_io(p_dev);
 }
 
 static int cm4000_config(struct pcmcia_device * link, int devno)
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index c0775c844e0..815cde1d057 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -29,7 +29,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -110,7 +109,7 @@ static inline unsigned char xinb(unsigned short port)
 static void cm4040_do_poll(unsigned long dummy)
 {
 	struct reader_dev *dev = (struct reader_dev *) dummy;
-	unsigned int obs = xinb(dev->p_dev->io.BasePort1
+	unsigned int obs = xinb(dev->p_dev->resource[0]->start
 				+ REG_OFFSET_BUFFER_STATUS);
 
 	if ((obs & BSR_BULK_IN_FULL)) {
@@ -141,7 +140,7 @@ static void cm4040_stop_poll(struct reader_dev *dev)
 static int wait_for_bulk_out_ready(struct reader_dev *dev)
 {
 	int i, rc;
-	int iobase = dev->p_dev->io.BasePort1;
+	int iobase = dev->p_dev->resource[0]->start;
 
 	for (i = 0; i < POLL_LOOP_COUNT; i++) {
 		if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
@@ -171,7 +170,7 @@ static int wait_for_bulk_out_ready(struct reader_dev *dev)
 /* Write to Sync Control Register */
 static int write_sync_reg(unsigned char val, struct reader_dev *dev)
 {
-	int iobase = dev->p_dev->io.BasePort1;
+	int iobase = dev->p_dev->resource[0]->start;
 	int rc;
 
 	rc = wait_for_bulk_out_ready(dev);
@@ -189,7 +188,7 @@ static int write_sync_reg(unsigned char val, struct reader_dev *dev)
 static int wait_for_bulk_in_ready(struct reader_dev *dev)
 {
 	int i, rc;
-	int iobase = dev->p_dev->io.BasePort1;
+	int iobase = dev->p_dev->resource[0]->start;
 
 	for (i = 0; i < POLL_LOOP_COUNT; i++) {
 		if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
@@ -219,7 +218,7 @@ static ssize_t cm4040_read(struct file *filp, char __user *buf,
 			size_t count, loff_t *ppos)
 {
 	struct reader_dev *dev = filp->private_data;
-	int iobase = dev->p_dev->io.BasePort1;
+	int iobase = dev->p_dev->resource[0]->start;
 	size_t bytes_to_read;
 	unsigned long i;
 	size_t min_bytes_to_read;
@@ -321,7 +320,7 @@ static ssize_t cm4040_write(struct file *filp, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	struct reader_dev *dev = filp->private_data;
-	int iobase = dev->p_dev->io.BasePort1;
+	int iobase = dev->p_dev->resource[0]->start;
 	ssize_t rc;
 	int i;
 	unsigned int bytes_to_write;
@@ -528,16 +527,12 @@ static int cm4040_config_check(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	/* Get the IOaddr */
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	if (!(cfg->io.flags & CISTPL_IO_8BIT))
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	if (!(cfg->io.flags & CISTPL_IO_16BIT))
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-
-	rc = pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
+	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+	rc = pcmcia_request_io(p_dev);
+
 	dev_printk(KERN_INFO, &p_dev->dev,
 		   "pcmcia_request_io returned 0x%x\n", rc);
 	return rc;
@@ -549,10 +544,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
 	struct reader_dev *dev;
 	int fail_rc;
 
-	link->io.BasePort2 = 0;
-	link->io.NumPorts2 = 0;
-	link->io.Attributes2 = 0;
-
 	if (pcmcia_loop_config(link, cm4040_config_check, NULL))
 		goto cs_release;
 
@@ -568,8 +559,8 @@ static int reader_config(struct pcmcia_device *link, int devno)
 
 	dev = link->priv;
 
-	DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno,
-	      link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1);
+	DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno,
+	      link->resource[0]);
 	DEBUGP(2, dev, "<- reader_config (succ)\n");
 
 	return 0;
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 63c32e3f23b..67bdb05798b 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -84,23 +84,22 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 {
 	struct ipw_dev *ipw = priv_data;
 	struct resource *io_resource;
-	memreq_t memreq_attr_memory;
-	memreq_t memreq_common_memory;
 	int ret;
 
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
-	p_dev->io.IOAddrLines = 16;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* 0x40 causes it to generate level mode interrupts. */
 	/* 0x04 enables IREQ pin. */
 	p_dev->conf.ConfigIndex = cfg->index | 0x44;
-	ret = pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->io_lines = 16;
+	ret = pcmcia_request_io(p_dev);
 	if (ret)
 		return ret;
 
-	io_resource = request_region(p_dev->io.BasePort1, p_dev->io.NumPorts1,
+	io_resource = request_region(p_dev->resource[0]->start,
+				resource_size(p_dev->resource[0]),
 				IPWIRELESS_PCCARD_NAME);
 
 	if (cfg->mem.nwin == 0)
@@ -120,11 +119,8 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 	if (ret != 0)
 		goto exit1;
 
-	memreq_common_memory.CardOffset = cfg->mem.win[0].card_addr;
-	memreq_common_memory.Page = 0;
-
 	ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory,
-				&memreq_common_memory);
+				cfg->mem.win[0].card_addr);
 
 	if (ret != 0)
 		goto exit2;
@@ -149,12 +145,7 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 	if (ret != 0)
 		goto exit2;
 
-	memreq_attr_memory.CardOffset = 0;
-	memreq_attr_memory.Page = 0;
-
-	ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory,
-				&memreq_attr_memory);
-
+	ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0);
 	if (ret != 0)
 		goto exit3;
 
@@ -166,15 +157,12 @@ static int ipwireless_probe(struct pcmcia_device *p_dev,
 	return 0;
 
 exit3:
-	pcmcia_release_window(p_dev, ipw->handle_attr_memory);
 exit2:
 	if (ipw->common_memory) {
 		release_mem_region(ipw->request_common_memory.Base,
 				ipw->request_common_memory.Size);
 		iounmap(ipw->common_memory);
-		pcmcia_release_window(p_dev, ipw->handle_common_memory);
-	} else
-		pcmcia_release_window(p_dev, ipw->handle_common_memory);
+	}
 exit1:
 	release_resource(io_resource);
 	pcmcia_disable_device(p_dev);
@@ -197,7 +185,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
 
-	ipwireless_init_hardware_v1(ipw->hardware, link->io.BasePort1,
+	ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start,
 				    ipw->attr_memory, ipw->common_memory,
 				    ipw->is_v2_card, signalled_reboot_callback,
 				    ipw);
@@ -209,10 +197,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
 			ipw->is_v2_card ? "V2/V3" : "V1");
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME
-			": I/O ports 0x%04x-0x%04x, irq %d\n",
-			(unsigned int) link->io.BasePort1,
-			(unsigned int) (link->io.BasePort1 +
-				link->io.NumPorts1 - 1),
+		": I/O ports %pR, irq %d\n", link->resource[0],
 			(unsigned int) link->irq);
 	if (ipw->attr_memory && ipw->common_memory)
 		printk(KERN_INFO IPWIRELESS_PCCARD_NAME
@@ -250,13 +235,12 @@ exit:
 		release_mem_region(ipw->request_attr_memory.Base,
 				ipw->request_attr_memory.Size);
 		iounmap(ipw->attr_memory);
-		pcmcia_release_window(link, ipw->handle_attr_memory);
+
 	}
 	if (ipw->common_memory) {
 		release_mem_region(ipw->request_common_memory.Base,
 				ipw->request_common_memory.Size);
 		iounmap(ipw->common_memory);
-		pcmcia_release_window(link, ipw->handle_common_memory);
 	}
 	pcmcia_disable_device(link);
 	return -1;
@@ -274,11 +258,6 @@ static void release_ipwireless(struct ipw_dev *ipw)
 				ipw->request_attr_memory.Size);
 		iounmap(ipw->attr_memory);
 	}
-	if (ipw->common_memory)
-		pcmcia_release_window(ipw->link, ipw->handle_common_memory);
-	if (ipw->attr_memory)
-		pcmcia_release_window(ipw->link, ipw->handle_attr_memory);
-
 	pcmcia_disable_device(ipw->link);
 }
 
diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h
index 96d0ef31b17..c207be87b59 100644
--- a/drivers/char/pcmcia/ipwireless/main.h
+++ b/drivers/char/pcmcia/ipwireless/main.h
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index 65920163f53..9fe53834793 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -239,7 +239,7 @@ static int ipwireless_ppp_ioctl(struct ppp_channel *ppp_channel,
 	return err;
 }
 
-static struct ppp_channel_ops ipwireless_ppp_channel_ops = {
+static const struct ppp_channel_ops ipwireless_ppp_channel_ops = {
 	.start_xmit = ipwireless_ppp_start_xmit,
 	.ioctl      = ipwireless_ppp_ioctl
 };
diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h
index 4da6c201f72..3e163d4cab1 100644
--- a/drivers/char/pcmcia/ipwireless/tty.h
+++ b/drivers/char/pcmcia/ipwireless/tty.h
@@ -21,7 +21,6 @@
 #include <linux/types.h>
 #include <linux/sched.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 308903ec8bf..9ecd6bef5d3 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -70,7 +70,6 @@
 #include <linux/workqueue.h>
 #include <linux/hdlc.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -572,18 +571,15 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
 			  unsigned int vcc,
 			  void *priv_data)
 {
-	if (cfg->io.nwin > 0) {
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(cfg->io.flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(cfg->io.flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = cfg->io.win[0].base;
-		p_dev->io.NumPorts1 = cfg->io.win[0].len;
-		return pcmcia_request_io(p_dev, &p_dev->io);
-	}
-	return -ENODEV;
+	if (!cfg->io.nwin)
+		return -ENODEV;
+
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
+	p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags);
+	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+	return pcmcia_request_io(p_dev);
 }
 
 static int mgslpc_config(struct pcmcia_device *link)
@@ -610,16 +606,15 @@ static int mgslpc_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    info->io_base = link->io.BasePort1;
+    info->io_base = link->resource[0]->start;
     info->irq_level = link->irq;
 
     dev_info(&link->dev, "index 0x%02x:",
 	    link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	    printk(", irq %d", link->irq);
-    if (link->io.NumPorts1)
-	    printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		   link->io.BasePort1+link->io.NumPorts1-1);
+    if (link->resource[0])
+	    printk(", io %pR", link->resource[0]);
     printk("\n");
     return 0;
 
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d71f0fc34b4..507441ac6ed 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -3128,7 +3128,7 @@ static struct cdev tty_cdev, console_cdev;
  * Ok, now we can initialize the rest of the tty devices and can count
  * on memory allocations, interrupts etc..
  */
-static int __init tty_init(void)
+int __init tty_init(void)
 {
 	cdev_init(&tty_cdev, &tty_fops);
 	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
@@ -3149,4 +3149,4 @@ static int __init tty_init(void)
 #endif
 	return 0;
 }
-module_init(tty_init);
+
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 7cdb6ee569c..44f03ddd887 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -104,6 +104,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/uaccess.h>
+#include <linux/kdb.h>
 
 #define MAX_NR_CON_DRIVER 16
 
@@ -187,10 +188,15 @@ static DECLARE_WORK(console_work, console_callback);
  * fg_console is the current virtual console,
  * last_console is the last used one,
  * want_console is the console we want to switch to,
+ * saved_* variants are for save/restore around kernel debugger enter/leave
  */
 int fg_console;
 int last_console;
 int want_console = -1;
+int saved_fg_console;
+int saved_last_console;
+int saved_want_console;
+int saved_vc_mode;
 
 /*
  * For each existing display, we have a pointer to console currently visible
@@ -831,9 +837,10 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
 				unsigned int cols, unsigned int lines)
 {
 	unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
+	unsigned long end;
 	unsigned int old_cols, old_rows, old_row_size, old_screen_size;
 	unsigned int new_cols, new_rows, new_row_size, new_screen_size;
-	unsigned int end, user;
+	unsigned int user;
 	unsigned short *newscreen;
 
 	WARN_CONSOLE_UNLOCKED();
@@ -3059,7 +3066,8 @@ static int bind_con_driver(const struct consw *csw, int first, int last,
 
 		old_was_color = vc->vc_can_do_color;
 		vc->vc_sw->con_deinit(vc);
-		vc->vc_origin = (unsigned long)vc->vc_screenbuf;
+		if (!vc->vc_origin)
+			vc->vc_origin = (unsigned long)vc->vc_screenbuf;
 		visual_init(vc, i, 0);
 		set_origin(vc);
 		update_attr(vc);
@@ -3414,6 +3422,78 @@ int con_is_bound(const struct consw *csw)
 EXPORT_SYMBOL(con_is_bound);
 
 /**
+ * con_debug_enter - prepare the console for the kernel debugger
+ * @sw: console driver
+ *
+ * Called when the console is taken over by the kernel debugger, this
+ * function needs to save the current console state, then put the console
+ * into a state suitable for the kernel debugger.
+ *
+ * RETURNS:
+ * Zero on success, nonzero if a failure occurred when trying to prepare
+ * the console for the debugger.
+ */
+int con_debug_enter(struct vc_data *vc)
+{
+	int ret = 0;
+
+	saved_fg_console = fg_console;
+	saved_last_console = last_console;
+	saved_want_console = want_console;
+	saved_vc_mode = vc->vc_mode;
+	vc->vc_mode = KD_TEXT;
+	console_blanked = 0;
+	if (vc->vc_sw->con_debug_enter)
+		ret = vc->vc_sw->con_debug_enter(vc);
+#ifdef CONFIG_KGDB_KDB
+	/* Set the initial LINES variable if it is not already set */
+	if (vc->vc_rows < 999) {
+		int linecount;
+		char lns[4];
+		const char *setargs[3] = {
+			"set",
+			"LINES",
+			lns,
+		};
+		if (kdbgetintenv(setargs[0], &linecount)) {
+			snprintf(lns, 4, "%i", vc->vc_rows);
+			kdb_set(2, setargs);
+		}
+	}
+#endif /* CONFIG_KGDB_KDB */
+	return ret;
+}
+EXPORT_SYMBOL_GPL(con_debug_enter);
+
+/**
+ * con_debug_leave - restore console state
+ * @sw: console driver
+ *
+ * Restore the console state to what it was before the kernel debugger
+ * was invoked.
+ *
+ * RETURNS:
+ * Zero on success, nonzero if a failure occurred when trying to restore
+ * the console.
+ */
+int con_debug_leave(void)
+{
+	struct vc_data *vc;
+	int ret = 0;
+
+	fg_console = saved_fg_console;
+	last_console = saved_last_console;
+	want_console = saved_want_console;
+	vc_cons[fg_console].d->vc_mode = saved_vc_mode;
+
+	vc = vc_cons[fg_console].d;
+	if (vc->vc_sw->con_debug_leave)
+		ret = vc->vc_sw->con_debug_leave(vc);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(con_debug_leave);
+
+/**
  * register_con_driver - register console driver to console layer
  * @csw: console driver
  * @first: the first console to take over, minimum value is 0
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 72a633a6ec9..cfb0f527841 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -68,10 +68,7 @@ static struct clocksource clocksource_acpi_pm = {
 	.rating		= 200,
 	.read		= acpi_pm_read,
 	.mask		= (cycle_t)ACPI_PM_MASK,
-	.mult		= 0, /*to be calculated*/
-	.shift		= 22,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-
 };
 
 
@@ -190,9 +187,6 @@ static int __init init_acpi_pm_clocksource(void)
 	if (!pmtmr_ioport)
 		return -ENODEV;
 
-	clocksource_acpi_pm.mult = clocksource_hz2mult(PMTMR_TICKS_PER_SEC,
-						clocksource_acpi_pm.shift);
-
 	/* "verify" this timing source: */
 	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
 		udelay(100 * j);
@@ -220,7 +214,8 @@ static int __init init_acpi_pm_clocksource(void)
 	if (verify_pmtmr_rate() != 0)
 		return -ENODEV;
 
-	return clocksource_register(&clocksource_acpi_pm);
+	return clocksource_register_hz(&clocksource_acpi_pm,
+						PMTMR_TICKS_PER_SEC);
 }
 
 /* We use fs_initcall because we want the PCI fixups to have run
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index dbefe15bd58..a5071084337 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -74,6 +74,17 @@ static void cpuidle_idle_call(void)
 	 */
 	hrtimer_peek_ahead_timers();
 #endif
+
+	/*
+	 * Call the device's prepare function before calling the
+	 * governor's select function.  ->prepare gives the device's
+	 * cpuidle driver a chance to update any dynamic information
+	 * of its cpuidle states for the current idle period, e.g.
+	 * state availability, latencies, residencies, etc.
+	 */
+	if (dev->prepare)
+		dev->prepare(dev);
+
 	/* ask the governor for the next state */
 	next_state = cpuidle_curr_governor->select(dev);
 	if (need_resched()) {
@@ -282,6 +293,26 @@ static int __cpuidle_register_device(struct cpuidle_device *dev)
 
 	poll_idle_init(dev);
 
+	/*
+	 * cpuidle driver should set the dev->power_specified bit
+	 * before registering the device if the driver provides
+	 * power_usage numbers.
+	 *
+	 * For those devices whose ->power_specified is not set,
+	 * we fill in power_usage with decreasing values as the
+	 * cpuidle code has an implicit assumption that state Cn
+	 * uses less power than C(n-1).
+	 *
+	 * With CONFIG_ARCH_HAS_CPU_RELAX, C0 is already assigned
+	 * an power value of -1.  So we use -2, -3, etc, for other
+	 * c-states.
+	 */
+	if (!dev->power_specified) {
+		int i;
+		for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++)
+			dev->states[i].power_usage = -1 - i;
+	}
+
 	per_cpu(cpuidle_devices, dev->cpu) = dev;
 	list_add(&dev->device_list, &cpuidle_detected_devices);
 	if ((ret = cpuidle_add_sysfs(sys_dev))) {
diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index 1b128702d30..c2408bbe9c2 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -234,6 +234,7 @@ static int menu_select(struct cpuidle_device *dev)
 {
 	struct menu_device *data = &__get_cpu_var(menu_devices);
 	int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
+	unsigned int power_usage = -1;
 	int i;
 	int multiplier;
 
@@ -278,19 +279,27 @@ static int menu_select(struct cpuidle_device *dev)
 	if (data->expected_us > 5)
 		data->last_state_idx = CPUIDLE_DRIVER_STATE_START;
 
-
-	/* find the deepest idle state that satisfies our constraints */
+	/*
+	 * Find the idle state with the lowest power while satisfying
+	 * our constraints.
+	 */
 	for (i = CPUIDLE_DRIVER_STATE_START; i < dev->state_count; i++) {
 		struct cpuidle_state *s = &dev->states[i];
 
+		if (s->flags & CPUIDLE_FLAG_IGNORE)
+			continue;
 		if (s->target_residency > data->predicted_us)
-			break;
+			continue;
 		if (s->exit_latency > latency_req)
-			break;
+			continue;
 		if (s->exit_latency * multiplier > data->predicted_us)
-			break;
-		data->exit_us = s->exit_latency;
-		data->last_state_idx = i;
+			continue;
+
+		if (s->power_usage < power_usage) {
+			power_usage = s->power_usage;
+			data->last_state_idx = i;
+			data->exit_us = s->exit_latency;
+		}
 	}
 
 	return data->last_state_idx;
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index b99c38f23d6..26af2dd5d83 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -2247,20 +2247,20 @@ static struct of_platform_driver n2_mau_driver = {
 
 static int __init n2_init(void)
 {
-	int err = of_register_driver(&n2_crypto_driver, &of_bus_type);
+	int err = of_register_platform_driver(&n2_crypto_driver);
 
 	if (!err) {
-		err = of_register_driver(&n2_mau_driver, &of_bus_type);
+		err = of_register_platform_driver(&n2_mau_driver);
 		if (err)
-			of_unregister_driver(&n2_crypto_driver);
+			of_unregister_platform_driver(&n2_crypto_driver);
 	}
 	return err;
 }
 
 static void __exit n2_exit(void)
 {
-	of_unregister_driver(&n2_mau_driver);
-	of_unregister_driver(&n2_crypto_driver);
+	of_unregister_platform_driver(&n2_mau_driver);
+	of_unregister_platform_driver(&n2_crypto_driver);
 }
 
 module_init(n2_init);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 9e01e96fee9..fed57634b6c 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -33,6 +33,19 @@ if DMADEVICES
 
 comment "DMA Devices"
 
+config INTEL_MID_DMAC
+	tristate "Intel MID DMA support for Peripheral DMA controllers"
+	depends on PCI && X86
+	select DMA_ENGINE
+	default n
+	help
+	  Enable support for the Intel(R) MID DMA engine present
+	  in Intel MID chipsets.
+
+	  Say Y here if you have such a chipset.
+
+	  If unsure, say N.
+
 config ASYNC_TX_DISABLE_CHANNEL_SWITCH
 	bool
 
@@ -175,6 +188,13 @@ config PL330_DMA
 	  You need to provide platform specific settings via
 	  platform_data for a dma-pl330 device.
 
+config PCH_DMA
+	tristate "Topcliff PCH DMA support"
+	depends on PCI && X86
+	select DMA_ENGINE
+	help
+	  Enable support for the Topcliff PCH DMA engine.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0fe5ebbfda5..72bd70384d8 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,6 +7,7 @@ endif
 
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
 obj-$(CONFIG_NET_DMA) += iovlock.o
+obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
@@ -23,3 +24,4 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
 obj-$(CONFIG_PL330_DMA) += pl330.o
+obj-$(CONFIG_PCH_DMA) += pch_dma.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index e88076022a7..a0f3e6a06e0 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -790,12 +790,12 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 	list_splice_init(&atchan->queue, &list);
 	list_splice_init(&atchan->active_list, &list);
 
-	spin_unlock_bh(&atchan->lock);
-
 	/* Flush all pending and queued descriptors */
 	list_for_each_entry_safe(desc, _desc, &list, desc_node)
 		atc_chain_complete(atchan, desc);
 
+	spin_unlock_bh(&atchan->lock);
+
 	return 0;
 }
 
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index a724e6be1b4..557e2272e5b 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -72,6 +72,9 @@ struct coh901318_chan {
 	unsigned long nbr_active_done;
 	unsigned long busy;
 
+	u32 runtime_addr;
+	u32 runtime_ctrl;
+
 	struct coh901318_base *base;
 };
 
@@ -190,6 +193,9 @@ static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan)
 static inline dma_addr_t
 cohc_dev_addr(struct coh901318_chan *cohc)
 {
+	/* Runtime supplied address will take precedence */
+	if (cohc->runtime_addr)
+		return cohc->runtime_addr;
 	return cohc->base->platform->chan_conf[cohc->id].dev_addr;
 }
 
@@ -1055,6 +1061,14 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 
 	params = cohc_chan_param(cohc);
 	config = params->config;
+	/*
+	 * Add runtime-specific control on top, make
+	 * sure the bits you set per peripheral channel are
+	 * cleared in the default config from the platform.
+	 */
+	ctrl_chained |= cohc->runtime_ctrl;
+	ctrl_last |= cohc->runtime_ctrl;
+	ctrl |= cohc->runtime_ctrl;
 
 	if (direction == DMA_TO_DEVICE) {
 		u32 tx_flags = COH901318_CX_CTRL_PRDD_SOURCE |
@@ -1113,6 +1127,12 @@ coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	if (ret)
 		goto err_lli_fill;
 
+	/*
+	 * Set the default ctrl for the channel to the one from the lli,
+	 * things may have changed due to odd buffer alignment etc.
+	 */
+	coh901318_set_ctrl(cohc, lli->control);
+
 	COH_DBG(coh901318_list_print(cohc, lli));
 
 	/* Pick a descriptor to handle this transfer */
@@ -1175,6 +1195,146 @@ coh901318_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&cohc->lock, flags);
 }
 
+/*
+ * Here we wrap in the runtime dma control interface
+ */
+struct burst_table {
+	int burst_8bit;
+	int burst_16bit;
+	int burst_32bit;
+	u32 reg;
+};
+
+static const struct burst_table burst_sizes[] = {
+	{
+		.burst_8bit = 64,
+		.burst_16bit = 32,
+		.burst_32bit = 16,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_64_BYTES,
+	},
+	{
+		.burst_8bit = 48,
+		.burst_16bit = 24,
+		.burst_32bit = 12,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_48_BYTES,
+	},
+	{
+		.burst_8bit = 32,
+		.burst_16bit = 16,
+		.burst_32bit = 8,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_32_BYTES,
+	},
+	{
+		.burst_8bit = 16,
+		.burst_16bit = 8,
+		.burst_32bit = 4,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_16_BYTES,
+	},
+	{
+		.burst_8bit = 8,
+		.burst_16bit = 4,
+		.burst_32bit = 2,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_8_BYTES,
+	},
+	{
+		.burst_8bit = 4,
+		.burst_16bit = 2,
+		.burst_32bit = 1,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_4_BYTES,
+	},
+	{
+		.burst_8bit = 2,
+		.burst_16bit = 1,
+		.burst_32bit = 0,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_2_BYTES,
+	},
+	{
+		.burst_8bit = 1,
+		.burst_16bit = 0,
+		.burst_32bit = 0,
+		.reg = COH901318_CX_CTRL_BURST_COUNT_1_BYTE,
+	},
+};
+
+static void coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
+			struct dma_slave_config *config)
+{
+	struct coh901318_chan *cohc = to_coh901318_chan(chan);
+	dma_addr_t addr;
+	enum dma_slave_buswidth addr_width;
+	u32 maxburst;
+	u32 runtime_ctrl = 0;
+	int i = 0;
+
+	/* We only support mem to per or per to mem transfers */
+	if (config->direction == DMA_FROM_DEVICE) {
+		addr = config->src_addr;
+		addr_width = config->src_addr_width;
+		maxburst = config->src_maxburst;
+	} else if (config->direction == DMA_TO_DEVICE) {
+		addr = config->dst_addr;
+		addr_width = config->dst_addr_width;
+		maxburst = config->dst_maxburst;
+	} else {
+		dev_err(COHC_2_DEV(cohc), "illegal channel mode\n");
+		return;
+	}
+
+	dev_dbg(COHC_2_DEV(cohc), "configure channel for %d byte transfers\n",
+		addr_width);
+	switch (addr_width)  {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		runtime_ctrl |=
+			COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS |
+			COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS;
+
+		while (i < ARRAY_SIZE(burst_sizes)) {
+			if (burst_sizes[i].burst_8bit <= maxburst)
+				break;
+			i++;
+		}
+
+		break;
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		runtime_ctrl |=
+			COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS |
+			COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS;
+
+		while (i < ARRAY_SIZE(burst_sizes)) {
+			if (burst_sizes[i].burst_16bit <= maxburst)
+				break;
+			i++;
+		}
+
+		break;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		/* Direction doesn't matter here, it's 32/32 bits */
+		runtime_ctrl |=
+			COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS |
+			COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS;
+
+		while (i < ARRAY_SIZE(burst_sizes)) {
+			if (burst_sizes[i].burst_32bit <= maxburst)
+				break;
+			i++;
+		}
+
+		break;
+	default:
+		dev_err(COHC_2_DEV(cohc),
+			"bad runtimeconfig: alien address width\n");
+		return;
+	}
+
+	runtime_ctrl |= burst_sizes[i].reg;
+	dev_dbg(COHC_2_DEV(cohc),
+		"selected burst size %d bytes for address width %d bytes, maxburst %d\n",
+		burst_sizes[i].burst_8bit, addr_width, maxburst);
+
+	cohc->runtime_addr = addr;
+	cohc->runtime_ctrl = runtime_ctrl;
+}
+
 static int
 coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		  unsigned long arg)
@@ -1184,6 +1344,14 @@ coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 	struct coh901318_desc *cohd;
 	void __iomem *virtbase = cohc->base->virtbase;
 
+	if (cmd == DMA_SLAVE_CONFIG) {
+		struct dma_slave_config *config =
+			(struct dma_slave_config *) arg;
+
+		coh901318_dma_set_runtimeconfig(chan, config);
+		return 0;
+	  }
+
 	if (cmd == DMA_PAUSE) {
 		coh901318_pause(chan);
 		return 0;
@@ -1240,6 +1408,7 @@ coh901318_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 
 	return 0;
 }
+
 void coh901318_base_init(struct dma_device *dma, const int *pick_chans,
 			 struct coh901318_base *base)
 {
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 68d58c414cf..5589358b684 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -540,7 +540,7 @@ static int dmatest_add_channel(struct dma_chan *chan)
 	struct dmatest_chan	*dtc;
 	struct dma_device	*dma_dev = chan->device;
 	unsigned int		thread_count = 0;
-	unsigned int		cnt;
+	int cnt;
 
 	dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL);
 	if (!dtc) {
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
new file mode 100644
index 00000000000..c2591e8d9b6
--- /dev/null
+++ b/drivers/dma/intel_mid_dma.c
@@ -0,0 +1,1143 @@
+/*
+ *  intel_mid_dma.c - Intel Langwell DMA Drivers
+ *
+ *  Copyright (C) 2008-10 Intel Corp
+ *  Author: Vinod Koul <vinod.koul@intel.com>
+ *  The driver design is based on dw_dmac driver
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *
+ */
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/intel_mid_dma.h>
+
+#define MAX_CHAN	4 /*max ch across controllers*/
+#include "intel_mid_dma_regs.h"
+
+#define INTEL_MID_DMAC1_ID		0x0814
+#define INTEL_MID_DMAC2_ID		0x0813
+#define INTEL_MID_GP_DMAC2_ID		0x0827
+#define INTEL_MFLD_DMAC1_ID		0x0830
+#define LNW_PERIPHRAL_MASK_BASE		0xFFAE8008
+#define LNW_PERIPHRAL_MASK_SIZE		0x10
+#define LNW_PERIPHRAL_STATUS		0x0
+#define LNW_PERIPHRAL_MASK		0x8
+
+struct intel_mid_dma_probe_info {
+	u8 max_chan;
+	u8 ch_base;
+	u16 block_size;
+	u32 pimr_mask;
+};
+
+#define INFO(_max_chan, _ch_base, _block_size, _pimr_mask) \
+	((kernel_ulong_t)&(struct intel_mid_dma_probe_info) {	\
+		.max_chan = (_max_chan),			\
+		.ch_base = (_ch_base),				\
+		.block_size = (_block_size),			\
+		.pimr_mask = (_pimr_mask),			\
+	})
+
+/*****************************************************************************
+Utility Functions*/
+/**
+ * get_ch_index	-	convert status to channel
+ * @status: status mask
+ * @base: dma ch base value
+ *
+ * Modify the status mask and return the channel index needing
+ * attention (or -1 if neither)
+ */
+static int get_ch_index(int *status, unsigned int base)
+{
+	int i;
+	for (i = 0; i < MAX_CHAN; i++) {
+		if (*status & (1 << (i + base))) {
+			*status = *status & ~(1 << (i + base));
+			pr_debug("MDMA: index %d New status %x\n", i, *status);
+			return i;
+		}
+	}
+	return -1;
+}
+
+/**
+ * get_block_ts	-	calculates dma transaction length
+ * @len: dma transfer length
+ * @tx_width: dma transfer src width
+ * @block_size: dma controller max block size
+ *
+ * Based on src width calculate the DMA trsaction length in data items
+ * return data items or FFFF if exceeds max length for block
+ */
+static int get_block_ts(int len, int tx_width, int block_size)
+{
+	int byte_width = 0, block_ts = 0;
+
+	switch (tx_width) {
+	case LNW_DMA_WIDTH_8BIT:
+		byte_width = 1;
+		break;
+	case LNW_DMA_WIDTH_16BIT:
+		byte_width = 2;
+		break;
+	case LNW_DMA_WIDTH_32BIT:
+	default:
+		byte_width = 4;
+		break;
+	}
+
+	block_ts = len/byte_width;
+	if (block_ts > block_size)
+		block_ts = 0xFFFF;
+	return block_ts;
+}
+
+/*****************************************************************************
+DMAC1 interrupt Functions*/
+
+/**
+ * dmac1_mask_periphral_intr -	mask the periphral interrupt
+ * @midc: dma channel for which masking is required
+ *
+ * Masks the DMA periphral interrupt
+ * this is valid for DMAC1 family controllers only
+ * This controller should have periphral mask registers already mapped
+ */
+static void dmac1_mask_periphral_intr(struct intel_mid_dma_chan *midc)
+{
+	u32 pimr;
+	struct middma_device *mid = to_middma_device(midc->chan.device);
+
+	if (mid->pimr_mask) {
+		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
+		pimr |= mid->pimr_mask;
+		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
+	}
+	return;
+}
+
+/**
+ * dmac1_unmask_periphral_intr -	unmask the periphral interrupt
+ * @midc: dma channel for which masking is required
+ *
+ * UnMasks the DMA periphral interrupt,
+ * this is valid for DMAC1 family controllers only
+ * This controller should have periphral mask registers already mapped
+ */
+static void dmac1_unmask_periphral_intr(struct intel_mid_dma_chan *midc)
+{
+	u32 pimr;
+	struct middma_device *mid = to_middma_device(midc->chan.device);
+
+	if (mid->pimr_mask) {
+		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
+		pimr &= ~mid->pimr_mask;
+		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
+	}
+	return;
+}
+
+/**
+ * enable_dma_interrupt -	enable the periphral interrupt
+ * @midc: dma channel for which enable interrupt is required
+ *
+ * Enable the DMA periphral interrupt,
+ * this is valid for DMAC1 family controllers only
+ * This controller should have periphral mask registers already mapped
+ */
+static void enable_dma_interrupt(struct intel_mid_dma_chan *midc)
+{
+	dmac1_unmask_periphral_intr(midc);
+
+	/*en ch interrupts*/
+	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
+	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
+	return;
+}
+
+/**
+ * disable_dma_interrupt -	disable the periphral interrupt
+ * @midc: dma channel for which disable interrupt is required
+ *
+ * Disable the DMA periphral interrupt,
+ * this is valid for DMAC1 family controllers only
+ * This controller should have periphral mask registers already mapped
+ */
+static void disable_dma_interrupt(struct intel_mid_dma_chan *midc)
+{
+	/*Check LPE PISR, make sure fwd is disabled*/
+	dmac1_mask_periphral_intr(midc);
+	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK);
+	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
+	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
+	return;
+}
+
+/*****************************************************************************
+DMA channel helper Functions*/
+/**
+ * mid_desc_get		-	get a descriptor
+ * @midc: dma channel for which descriptor is required
+ *
+ * Obtain a descriptor for the channel. Returns NULL if none are free.
+ * Once the descriptor is returned it is private until put on another
+ * list or freed
+ */
+static struct intel_mid_dma_desc *midc_desc_get(struct intel_mid_dma_chan *midc)
+{
+	struct intel_mid_dma_desc *desc, *_desc;
+	struct intel_mid_dma_desc *ret = NULL;
+
+	spin_lock_bh(&midc->lock);
+	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del(&desc->desc_node);
+			ret = desc;
+			break;
+		}
+	}
+	spin_unlock_bh(&midc->lock);
+	return ret;
+}
+
+/**
+ * mid_desc_put		-	put a descriptor
+ * @midc: dma channel for which descriptor is required
+ * @desc: descriptor to put
+ *
+ * Return a descriptor from lwn_desc_get back to the free pool
+ */
+static void midc_desc_put(struct intel_mid_dma_chan *midc,
+			struct intel_mid_dma_desc *desc)
+{
+	if (desc) {
+		spin_lock_bh(&midc->lock);
+		list_add_tail(&desc->desc_node, &midc->free_list);
+		spin_unlock_bh(&midc->lock);
+	}
+}
+/**
+ * midc_dostart		-		begin a DMA transaction
+ * @midc: channel for which txn is to be started
+ * @first: first descriptor of series
+ *
+ * Load a transaction into the engine. This must be called with midc->lock
+ * held and bh disabled.
+ */
+static void midc_dostart(struct intel_mid_dma_chan *midc,
+			struct intel_mid_dma_desc *first)
+{
+	struct middma_device *mid = to_middma_device(midc->chan.device);
+
+	/*  channel is idle */
+	if (midc->in_use && test_ch_en(midc->dma_base, midc->ch_id)) {
+		/*error*/
+		pr_err("ERR_MDMA: channel is busy in start\n");
+		/* The tasklet will hopefully advance the queue... */
+		return;
+	}
+
+	/*write registers and en*/
+	iowrite32(first->sar, midc->ch_regs + SAR);
+	iowrite32(first->dar, midc->ch_regs + DAR);
+	iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH);
+	iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW);
+	iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW);
+	iowrite32(first->ctl_hi, midc->ch_regs + CTL_HIGH);
+	pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n",
+		(int)first->sar, (int)first->dar, first->cfg_hi,
+		first->cfg_lo, first->ctl_hi, first->ctl_lo);
+
+	iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
+	first->status = DMA_IN_PROGRESS;
+}
+
+/**
+ * midc_descriptor_complete	-	process completed descriptor
+ * @midc: channel owning the descriptor
+ * @desc: the descriptor itself
+ *
+ * Process a completed descriptor and perform any callbacks upon
+ * the completion. The completion handling drops the lock during the
+ * callbacks but must be called with the lock held.
+ */
+static void midc_descriptor_complete(struct intel_mid_dma_chan *midc,
+	       struct intel_mid_dma_desc *desc)
+{
+	struct dma_async_tx_descriptor	*txd = &desc->txd;
+	dma_async_tx_callback callback_txd = NULL;
+	void *param_txd = NULL;
+
+	midc->completed = txd->cookie;
+	callback_txd = txd->callback;
+	param_txd = txd->callback_param;
+
+	list_move(&desc->desc_node, &midc->free_list);
+
+	spin_unlock_bh(&midc->lock);
+	if (callback_txd) {
+		pr_debug("MDMA: TXD callback set ... calling\n");
+		callback_txd(param_txd);
+		spin_lock_bh(&midc->lock);
+		return;
+	}
+	spin_lock_bh(&midc->lock);
+
+}
+/**
+ * midc_scan_descriptors -		check the descriptors in channel
+ *					mark completed when tx is completete
+ * @mid: device
+ * @midc: channel to scan
+ *
+ * Walk the descriptor chain for the device and process any entries
+ * that are complete.
+ */
+static void midc_scan_descriptors(struct middma_device *mid,
+				struct intel_mid_dma_chan *midc)
+{
+	struct intel_mid_dma_desc *desc = NULL, *_desc = NULL;
+
+	/*tx is complete*/
+	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
+		if (desc->status == DMA_IN_PROGRESS)  {
+			desc->status = DMA_SUCCESS;
+			midc_descriptor_complete(midc, desc);
+		}
+	}
+	return;
+}
+
+/*****************************************************************************
+DMA engine callback Functions*/
+/**
+ * intel_mid_dma_tx_submit -	callback to submit DMA transaction
+ * @tx: dma engine descriptor
+ *
+ * Submit the DMA trasaction for this descriptor, start if ch idle
+ */
+static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct intel_mid_dma_desc	*desc = to_intel_mid_dma_desc(tx);
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(tx->chan);
+	dma_cookie_t		cookie;
+
+	spin_lock_bh(&midc->lock);
+	cookie = midc->chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	midc->chan.cookie = cookie;
+	desc->txd.cookie = cookie;
+
+
+	if (list_empty(&midc->active_list)) {
+		midc_dostart(midc, desc);
+		list_add_tail(&desc->desc_node, &midc->active_list);
+	} else {
+		list_add_tail(&desc->desc_node, &midc->queue);
+	}
+	spin_unlock_bh(&midc->lock);
+
+	return cookie;
+}
+
+/**
+ * intel_mid_dma_issue_pending -	callback to issue pending txn
+ * @chan: chan where pending trascation needs to be checked and submitted
+ *
+ * Call for scan to issue pending descriptors
+ */
+static void intel_mid_dma_issue_pending(struct dma_chan *chan)
+{
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
+
+	spin_lock_bh(&midc->lock);
+	if (!list_empty(&midc->queue))
+		midc_scan_descriptors(to_middma_device(chan->device), midc);
+	spin_unlock_bh(&midc->lock);
+}
+
+/**
+ * intel_mid_dma_tx_status -	Return status of txn
+ * @chan: chan for where status needs to be checked
+ * @cookie: cookie for txn
+ * @txstate: DMA txn state
+ *
+ * Return status of DMA txn
+ */
+static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan,
+						dma_cookie_t cookie,
+						struct dma_tx_state *txstate)
+{
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
+	dma_cookie_t		last_used;
+	dma_cookie_t		last_complete;
+	int				ret;
+
+	last_complete = midc->completed;
+	last_used = chan->cookie;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret != DMA_SUCCESS) {
+		midc_scan_descriptors(to_middma_device(chan->device), midc);
+
+		last_complete = midc->completed;
+		last_used = chan->cookie;
+
+		ret = dma_async_is_complete(cookie, last_complete, last_used);
+	}
+
+	if (txstate) {
+		txstate->last = last_complete;
+		txstate->used = last_used;
+		txstate->residue = 0;
+	}
+	return ret;
+}
+
+/**
+ * intel_mid_dma_device_control -	DMA device control
+ * @chan: chan for DMA control
+ * @cmd: control cmd
+ * @arg: cmd arg value
+ *
+ * Perform DMA control command
+ */
+static int intel_mid_dma_device_control(struct dma_chan *chan,
+			enum dma_ctrl_cmd cmd, unsigned long arg)
+{
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
+	struct middma_device	*mid = to_middma_device(chan->device);
+	struct intel_mid_dma_desc	*desc, *_desc;
+	LIST_HEAD(list);
+
+	if (cmd != DMA_TERMINATE_ALL)
+		return -ENXIO;
+
+	spin_lock_bh(&midc->lock);
+	if (midc->in_use == false) {
+		spin_unlock_bh(&midc->lock);
+		return 0;
+	}
+	list_splice_init(&midc->free_list, &list);
+	midc->descs_allocated = 0;
+	midc->slave = NULL;
+
+	/* Disable interrupts */
+	disable_dma_interrupt(midc);
+
+	spin_unlock_bh(&midc->lock);
+	list_for_each_entry_safe(desc, _desc, &list, desc_node) {
+		pr_debug("MDMA: freeing descriptor %p\n", desc);
+		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
+	}
+	return 0;
+}
+
+/**
+ * intel_mid_dma_prep_slave_sg -	Prep slave sg txn
+ * @chan: chan for DMA transfer
+ * @sgl: scatter gather list
+ * @sg_len: length of sg txn
+ * @direction: DMA transfer dirtn
+ * @flags: DMA flags
+ *
+ * Do DMA sg txn: NOT supported now
+ */
+static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
+			struct dma_chan *chan, struct scatterlist *sgl,
+			unsigned int sg_len, enum dma_data_direction direction,
+			unsigned long flags)
+{
+	/*not supported now*/
+	return NULL;
+}
+
+/**
+ * intel_mid_dma_prep_memcpy -	Prep memcpy txn
+ * @chan: chan for DMA transfer
+ * @dest: destn address
+ * @src: src address
+ * @len: DMA transfer len
+ * @flags: DMA flags
+ *
+ * Perform a DMA memcpy. Note we support slave periphral DMA transfers only
+ * The periphral txn details should be filled in slave structure properly
+ * Returns the descriptor for this txn
+ */
+static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
+			struct dma_chan *chan, dma_addr_t dest,
+			dma_addr_t src, size_t len, unsigned long flags)
+{
+	struct intel_mid_dma_chan *midc;
+	struct intel_mid_dma_desc *desc = NULL;
+	struct intel_mid_dma_slave *mids;
+	union intel_mid_dma_ctl_lo ctl_lo;
+	union intel_mid_dma_ctl_hi ctl_hi;
+	union intel_mid_dma_cfg_lo cfg_lo;
+	union intel_mid_dma_cfg_hi cfg_hi;
+	enum intel_mid_dma_width width = 0;
+
+	pr_debug("MDMA: Prep for memcpy\n");
+	WARN_ON(!chan);
+	if (!len)
+		return NULL;
+
+	mids = chan->private;
+	WARN_ON(!mids);
+
+	midc = to_intel_mid_dma_chan(chan);
+	WARN_ON(!midc);
+
+	pr_debug("MDMA:called for DMA %x CH %d Length %zu\n",
+				midc->dma->pci_id, midc->ch_id, len);
+	pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n",
+		mids->cfg_mode, mids->dirn, mids->hs_mode, mids->src_width);
+
+	/*calculate CFG_LO*/
+	if (mids->hs_mode == LNW_DMA_SW_HS) {
+		cfg_lo.cfg_lo = 0;
+		cfg_lo.cfgx.hs_sel_dst = 1;
+		cfg_lo.cfgx.hs_sel_src = 1;
+	} else if (mids->hs_mode == LNW_DMA_HW_HS)
+		cfg_lo.cfg_lo = 0x00000;
+
+	/*calculate CFG_HI*/
+	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
+		/*SW HS only*/
+		cfg_hi.cfg_hi = 0;
+	} else {
+		cfg_hi.cfg_hi = 0;
+		if (midc->dma->pimr_mask) {
+			cfg_hi.cfgx.protctl = 0x0; /*default value*/
+			cfg_hi.cfgx.fifo_mode = 1;
+			if (mids->dirn == DMA_TO_DEVICE) {
+				cfg_hi.cfgx.src_per = 0;
+				if (mids->device_instance == 0)
+					cfg_hi.cfgx.dst_per = 3;
+				if (mids->device_instance == 1)
+					cfg_hi.cfgx.dst_per = 1;
+			} else if (mids->dirn == DMA_FROM_DEVICE) {
+				if (mids->device_instance == 0)
+					cfg_hi.cfgx.src_per = 2;
+				if (mids->device_instance == 1)
+					cfg_hi.cfgx.src_per = 0;
+				cfg_hi.cfgx.dst_per = 0;
+			}
+		} else {
+			cfg_hi.cfgx.protctl = 0x1; /*default value*/
+			cfg_hi.cfgx.src_per = cfg_hi.cfgx.dst_per =
+					midc->ch_id - midc->dma->chan_base;
+		}
+	}
+
+	/*calculate CTL_HI*/
+	ctl_hi.ctlx.reser = 0;
+	width = mids->src_width;
+
+	ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size);
+	pr_debug("MDMA:calc len %d for block size %d\n",
+				ctl_hi.ctlx.block_ts, midc->dma->block_size);
+	/*calculate CTL_LO*/
+	ctl_lo.ctl_lo = 0;
+	ctl_lo.ctlx.int_en = 1;
+	ctl_lo.ctlx.dst_tr_width = mids->dst_width;
+	ctl_lo.ctlx.src_tr_width = mids->src_width;
+	ctl_lo.ctlx.dst_msize = mids->src_msize;
+	ctl_lo.ctlx.src_msize = mids->dst_msize;
+
+	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
+		ctl_lo.ctlx.tt_fc = 0;
+		ctl_lo.ctlx.sinc = 0;
+		ctl_lo.ctlx.dinc = 0;
+	} else {
+		if (mids->dirn == DMA_TO_DEVICE) {
+			ctl_lo.ctlx.sinc = 0;
+			ctl_lo.ctlx.dinc = 2;
+			ctl_lo.ctlx.tt_fc = 1;
+		} else if (mids->dirn == DMA_FROM_DEVICE) {
+			ctl_lo.ctlx.sinc = 2;
+			ctl_lo.ctlx.dinc = 0;
+			ctl_lo.ctlx.tt_fc = 2;
+		}
+	}
+
+	pr_debug("MDMA:Calc CTL LO %x, CTL HI %x, CFG LO %x, CFG HI %x\n",
+		ctl_lo.ctl_lo, ctl_hi.ctl_hi, cfg_lo.cfg_lo, cfg_hi.cfg_hi);
+
+	enable_dma_interrupt(midc);
+
+	desc = midc_desc_get(midc);
+	if (desc == NULL)
+		goto err_desc_get;
+	desc->sar = src;
+	desc->dar = dest ;
+	desc->len = len;
+	desc->cfg_hi = cfg_hi.cfg_hi;
+	desc->cfg_lo = cfg_lo.cfg_lo;
+	desc->ctl_lo = ctl_lo.ctl_lo;
+	desc->ctl_hi = ctl_hi.ctl_hi;
+	desc->width = width;
+	desc->dirn = mids->dirn;
+	return &desc->txd;
+
+err_desc_get:
+	pr_err("ERR_MDMA: Failed to get desc\n");
+	midc_desc_put(midc, desc);
+	return NULL;
+}
+
+/**
+ * intel_mid_dma_free_chan_resources -	Frees dma resources
+ * @chan: chan requiring attention
+ *
+ * Frees the allocated resources on this DMA chan
+ */
+static void intel_mid_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
+	struct middma_device	*mid = to_middma_device(chan->device);
+	struct intel_mid_dma_desc	*desc, *_desc;
+
+	if (true == midc->in_use) {
+		/*trying to free ch in use!!!!!*/
+		pr_err("ERR_MDMA: trying to free ch in use\n");
+	}
+
+	spin_lock_bh(&midc->lock);
+	midc->descs_allocated = 0;
+	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
+		list_del(&desc->desc_node);
+		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
+	}
+	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
+		list_del(&desc->desc_node);
+		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
+	}
+	list_for_each_entry_safe(desc, _desc, &midc->queue, desc_node) {
+		list_del(&desc->desc_node);
+		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
+	}
+	spin_unlock_bh(&midc->lock);
+	midc->in_use = false;
+	/* Disable CH interrupts */
+	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK);
+	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR);
+}
+
+/**
+ * intel_mid_dma_alloc_chan_resources -	Allocate dma resources
+ * @chan: chan requiring attention
+ *
+ * Allocates DMA resources on this chan
+ * Return the descriptors allocated
+ */
+static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
+	struct middma_device	*mid = to_middma_device(chan->device);
+	struct intel_mid_dma_desc	*desc;
+	dma_addr_t		phys;
+	int	i = 0;
+
+
+	/* ASSERT:  channel is idle */
+	if (test_ch_en(mid->dma_base, midc->ch_id)) {
+		/*ch is not idle*/
+		pr_err("ERR_MDMA: ch not idle\n");
+		return -EIO;
+	}
+	midc->completed = chan->cookie = 1;
+
+	spin_lock_bh(&midc->lock);
+	while (midc->descs_allocated < DESCS_PER_CHANNEL) {
+		spin_unlock_bh(&midc->lock);
+		desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys);
+		if (!desc) {
+			pr_err("ERR_MDMA: desc failed\n");
+			return -ENOMEM;
+			/*check*/
+		}
+		dma_async_tx_descriptor_init(&desc->txd, chan);
+		desc->txd.tx_submit = intel_mid_dma_tx_submit;
+		desc->txd.flags = DMA_CTRL_ACK;
+		desc->txd.phys = phys;
+		spin_lock_bh(&midc->lock);
+		i = ++midc->descs_allocated;
+		list_add_tail(&desc->desc_node, &midc->free_list);
+	}
+	spin_unlock_bh(&midc->lock);
+	midc->in_use = false;
+	pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i);
+	return i;
+}
+
+/**
+ * midc_handle_error -	Handle DMA txn error
+ * @mid: controller where error occured
+ * @midc: chan where error occured
+ *
+ * Scan the descriptor for error
+ */
+static void midc_handle_error(struct middma_device *mid,
+		struct intel_mid_dma_chan *midc)
+{
+	midc_scan_descriptors(mid, midc);
+}
+
+/**
+ * dma_tasklet -	DMA interrupt tasklet
+ * @data: tasklet arg (the controller structure)
+ *
+ * Scan the controller for interrupts for completion/error
+ * Clear the interrupt and call for handling completion/error
+ */
+static void dma_tasklet(unsigned long data)
+{
+	struct middma_device *mid = NULL;
+	struct intel_mid_dma_chan *midc = NULL;
+	u32 status;
+	int i;
+
+	mid = (struct middma_device *)data;
+	if (mid == NULL) {
+		pr_err("ERR_MDMA: tasklet Null param\n");
+		return;
+	}
+	pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id);
+	status = ioread32(mid->dma_base + RAW_TFR);
+	pr_debug("MDMA:RAW_TFR %x\n", status);
+	status &= mid->intr_mask;
+	while (status) {
+		/*txn interrupt*/
+		i = get_ch_index(&status, mid->chan_base);
+		if (i < 0) {
+			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
+			return;
+		}
+		midc = &mid->ch[i];
+		if (midc == NULL) {
+			pr_err("ERR_MDMA:Null param midc\n");
+			return;
+		}
+		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
+				status, midc->ch_id, i);
+		/*clearing this interrupts first*/
+		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR);
+		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_BLOCK);
+
+		spin_lock_bh(&midc->lock);
+		midc_scan_descriptors(mid, midc);
+		pr_debug("MDMA:Scan of desc... complete, unmasking\n");
+		iowrite32(UNMASK_INTR_REG(midc->ch_id),
+				mid->dma_base + MASK_TFR);
+		spin_unlock_bh(&midc->lock);
+	}
+
+	status = ioread32(mid->dma_base + RAW_ERR);
+	status &= mid->intr_mask;
+	while (status) {
+		/*err interrupt*/
+		i = get_ch_index(&status, mid->chan_base);
+		if (i < 0) {
+			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
+			return;
+		}
+		midc = &mid->ch[i];
+		if (midc == NULL) {
+			pr_err("ERR_MDMA:Null param midc\n");
+			return;
+		}
+		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
+				status, midc->ch_id, i);
+
+		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_ERR);
+		spin_lock_bh(&midc->lock);
+		midc_handle_error(mid, midc);
+		iowrite32(UNMASK_INTR_REG(midc->ch_id),
+				mid->dma_base + MASK_ERR);
+		spin_unlock_bh(&midc->lock);
+	}
+	pr_debug("MDMA:Exiting takslet...\n");
+	return;
+}
+
+static void dma_tasklet1(unsigned long data)
+{
+	pr_debug("MDMA:in takslet1...\n");
+	return dma_tasklet(data);
+}
+
+static void dma_tasklet2(unsigned long data)
+{
+	pr_debug("MDMA:in takslet2...\n");
+	return dma_tasklet(data);
+}
+
+/**
+ * intel_mid_dma_interrupt -	DMA ISR
+ * @irq: IRQ where interrupt occurred
+ * @data: ISR cllback data (the controller structure)
+ *
+ * See if this is our interrupt if so then schedule the tasklet
+ * otherwise ignore
+ */
+static irqreturn_t intel_mid_dma_interrupt(int irq, void *data)
+{
+	struct middma_device *mid = data;
+	u32 status;
+	int call_tasklet = 0;
+
+	/*DMA Interrupt*/
+	pr_debug("MDMA:Got an interrupt on irq %d\n", irq);
+	if (!mid) {
+		pr_err("ERR_MDMA:null pointer mid\n");
+		return -EINVAL;
+	}
+
+	status = ioread32(mid->dma_base + RAW_TFR);
+	pr_debug("MDMA: Status %x, Mask %x\n", status, mid->intr_mask);
+	status &= mid->intr_mask;
+	if (status) {
+		/*need to disable intr*/
+		iowrite32((status << 8), mid->dma_base + MASK_TFR);
+		pr_debug("MDMA: Calling tasklet %x\n", status);
+		call_tasklet = 1;
+	}
+	status = ioread32(mid->dma_base + RAW_ERR);
+	status &= mid->intr_mask;
+	if (status) {
+		iowrite32(MASK_INTR_REG(status), mid->dma_base + MASK_ERR);
+		call_tasklet = 1;
+	}
+	if (call_tasklet)
+		tasklet_schedule(&mid->tasklet);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t intel_mid_dma_interrupt1(int irq, void *data)
+{
+	return intel_mid_dma_interrupt(irq, data);
+}
+
+static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data)
+{
+	return intel_mid_dma_interrupt(irq, data);
+}
+
+/**
+ * mid_setup_dma -	Setup the DMA controller
+ * @pdev: Controller PCI device structure
+ *
+ * Initilize the DMA controller, channels, registers with DMA engine,
+ * ISR. Initilize DMA controller channels.
+ */
+static int mid_setup_dma(struct pci_dev *pdev)
+{
+	struct middma_device *dma = pci_get_drvdata(pdev);
+	int err, i;
+	unsigned int irq_level;
+
+	/* DMA coherent memory pool for DMA descriptor allocations */
+	dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev,
+					sizeof(struct intel_mid_dma_desc),
+					32, 0);
+	if (NULL == dma->dma_pool) {
+		pr_err("ERR_MDMA:pci_pool_create failed\n");
+		err = -ENOMEM;
+		kfree(dma);
+		goto err_dma_pool;
+	}
+
+	INIT_LIST_HEAD(&dma->common.channels);
+	dma->pci_id = pdev->device;
+	if (dma->pimr_mask) {
+		dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE,
+					LNW_PERIPHRAL_MASK_SIZE);
+		if (dma->mask_reg == NULL) {
+			pr_err("ERR_MDMA:Cant map periphral intr space !!\n");
+			return -ENOMEM;
+		}
+	} else
+		dma->mask_reg = NULL;
+
+	pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan);
+	/*init CH structures*/
+	dma->intr_mask = 0;
+	for (i = 0; i < dma->max_chan; i++) {
+		struct intel_mid_dma_chan *midch = &dma->ch[i];
+
+		midch->chan.device = &dma->common;
+		midch->chan.cookie =  1;
+		midch->chan.chan_id = i;
+		midch->ch_id = dma->chan_base + i;
+		pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id);
+
+		midch->dma_base = dma->dma_base;
+		midch->ch_regs = dma->dma_base + DMA_CH_SIZE * midch->ch_id;
+		midch->dma = dma;
+		dma->intr_mask |= 1 << (dma->chan_base + i);
+		spin_lock_init(&midch->lock);
+
+		INIT_LIST_HEAD(&midch->active_list);
+		INIT_LIST_HEAD(&midch->queue);
+		INIT_LIST_HEAD(&midch->free_list);
+		/*mask interrupts*/
+		iowrite32(MASK_INTR_REG(midch->ch_id),
+			dma->dma_base + MASK_BLOCK);
+		iowrite32(MASK_INTR_REG(midch->ch_id),
+			dma->dma_base + MASK_SRC_TRAN);
+		iowrite32(MASK_INTR_REG(midch->ch_id),
+			dma->dma_base + MASK_DST_TRAN);
+		iowrite32(MASK_INTR_REG(midch->ch_id),
+			dma->dma_base + MASK_ERR);
+		iowrite32(MASK_INTR_REG(midch->ch_id),
+			dma->dma_base + MASK_TFR);
+
+		disable_dma_interrupt(midch);
+		list_add_tail(&midch->chan.device_node, &dma->common.channels);
+	}
+	pr_debug("MDMA: Calc Mask as %x for this controller\n", dma->intr_mask);
+
+	/*init dma structure*/
+	dma_cap_zero(dma->common.cap_mask);
+	dma_cap_set(DMA_MEMCPY, dma->common.cap_mask);
+	dma_cap_set(DMA_SLAVE, dma->common.cap_mask);
+	dma_cap_set(DMA_PRIVATE, dma->common.cap_mask);
+	dma->common.dev = &pdev->dev;
+	dma->common.chancnt = dma->max_chan;
+
+	dma->common.device_alloc_chan_resources =
+					intel_mid_dma_alloc_chan_resources;
+	dma->common.device_free_chan_resources =
+					intel_mid_dma_free_chan_resources;
+
+	dma->common.device_tx_status = intel_mid_dma_tx_status;
+	dma->common.device_prep_dma_memcpy = intel_mid_dma_prep_memcpy;
+	dma->common.device_issue_pending = intel_mid_dma_issue_pending;
+	dma->common.device_prep_slave_sg = intel_mid_dma_prep_slave_sg;
+	dma->common.device_control = intel_mid_dma_device_control;
+
+	/*enable dma cntrl*/
+	iowrite32(REG_BIT0, dma->dma_base + DMA_CFG);
+
+	/*register irq */
+	if (dma->pimr_mask) {
+		irq_level = IRQF_SHARED;
+		pr_debug("MDMA:Requesting irq shared for DMAC1\n");
+		err = request_irq(pdev->irq, intel_mid_dma_interrupt1,
+			IRQF_SHARED, "INTEL_MID_DMAC1", dma);
+		if (0 != err)
+			goto err_irq;
+	} else {
+		dma->intr_mask = 0x03;
+		irq_level = 0;
+		pr_debug("MDMA:Requesting irq for DMAC2\n");
+		err = request_irq(pdev->irq, intel_mid_dma_interrupt2,
+			0, "INTEL_MID_DMAC2", dma);
+		if (0 != err)
+			goto err_irq;
+	}
+	/*register device w/ engine*/
+	err = dma_async_device_register(&dma->common);
+	if (0 != err) {
+		pr_err("ERR_MDMA:device_register failed: %d\n", err);
+		goto err_engine;
+	}
+	if (dma->pimr_mask) {
+		pr_debug("setting up tasklet1 for DMAC1\n");
+		tasklet_init(&dma->tasklet, dma_tasklet1, (unsigned long)dma);
+	} else {
+		pr_debug("setting up tasklet2 for DMAC2\n");
+		tasklet_init(&dma->tasklet, dma_tasklet2, (unsigned long)dma);
+	}
+	return 0;
+
+err_engine:
+	free_irq(pdev->irq, dma);
+err_irq:
+	pci_pool_destroy(dma->dma_pool);
+	kfree(dma);
+err_dma_pool:
+	pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
+	return err;
+
+}
+
+/**
+ * middma_shutdown -	Shutdown the DMA controller
+ * @pdev: Controller PCI device structure
+ *
+ * Called by remove
+ * Unregister DMa controller, clear all structures and free interrupt
+ */
+static void middma_shutdown(struct pci_dev *pdev)
+{
+	struct middma_device *device = pci_get_drvdata(pdev);
+
+	dma_async_device_unregister(&device->common);
+	pci_pool_destroy(device->dma_pool);
+	if (device->mask_reg)
+		iounmap(device->mask_reg);
+	if (device->dma_base)
+		iounmap(device->dma_base);
+	free_irq(pdev->irq, device);
+	return;
+}
+
+/**
+ * intel_mid_dma_probe -	PCI Probe
+ * @pdev: Controller PCI device structure
+ * @id: pci device id structure
+ *
+ * Initilize the PCI device, map BARs, query driver data.
+ * Call setup_dma to complete contoller and chan initilzation
+ */
+static int __devinit intel_mid_dma_probe(struct pci_dev *pdev,
+					const struct pci_device_id *id)
+{
+	struct middma_device *device;
+	u32 base_addr, bar_size;
+	struct intel_mid_dma_probe_info *info;
+	int err;
+
+	pr_debug("MDMA: probe for %x\n", pdev->device);
+	info = (void *)id->driver_data;
+	pr_debug("MDMA: CH %d, base %d, block len %d, Periphral mask %x\n",
+				info->max_chan, info->ch_base,
+				info->block_size, info->pimr_mask);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_enable_device;
+
+	err = pci_request_regions(pdev, "intel_mid_dmac");
+	if (err)
+		goto err_request_regions;
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err)
+		goto err_set_dma_mask;
+
+	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err)
+		goto err_set_dma_mask;
+
+	device = kzalloc(sizeof(*device), GFP_KERNEL);
+	if (!device) {
+		pr_err("ERR_MDMA:kzalloc failed probe\n");
+		err = -ENOMEM;
+		goto err_kzalloc;
+	}
+	device->pdev = pci_dev_get(pdev);
+
+	base_addr = pci_resource_start(pdev, 0);
+	bar_size  = pci_resource_len(pdev, 0);
+	device->dma_base = ioremap_nocache(base_addr, DMA_REG_SIZE);
+	if (!device->dma_base) {
+		pr_err("ERR_MDMA:ioremap failed\n");
+		err = -ENOMEM;
+		goto err_ioremap;
+	}
+	pci_set_drvdata(pdev, device);
+	pci_set_master(pdev);
+	device->max_chan = info->max_chan;
+	device->chan_base = info->ch_base;
+	device->block_size = info->block_size;
+	device->pimr_mask = info->pimr_mask;
+
+	err = mid_setup_dma(pdev);
+	if (err)
+		goto err_dma;
+
+	return 0;
+
+err_dma:
+	iounmap(device->dma_base);
+err_ioremap:
+	pci_dev_put(pdev);
+	kfree(device);
+err_kzalloc:
+err_set_dma_mask:
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+err_request_regions:
+err_enable_device:
+	pr_err("ERR_MDMA:Probe failed %d\n", err);
+	return err;
+}
+
+/**
+ * intel_mid_dma_remove -	PCI remove
+ * @pdev: Controller PCI device structure
+ *
+ * Free up all resources and data
+ * Call shutdown_dma to complete contoller and chan cleanup
+ */
+static void __devexit intel_mid_dma_remove(struct pci_dev *pdev)
+{
+	struct middma_device *device = pci_get_drvdata(pdev);
+	middma_shutdown(pdev);
+	pci_dev_put(pdev);
+	kfree(device);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+/******************************************************************************
+* PCI stuff
+*/
+static struct pci_device_id intel_mid_dma_ids[] = {
+	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC1_ID),	INFO(2, 6, 4095, 0x200020)},
+	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC2_ID),	INFO(2, 0, 2047, 0)},
+	{ PCI_VDEVICE(INTEL, INTEL_MID_GP_DMAC2_ID),	INFO(2, 0, 2047, 0)},
+	{ PCI_VDEVICE(INTEL, INTEL_MFLD_DMAC1_ID),	INFO(4, 0, 4095, 0x400040)},
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids);
+
+static struct pci_driver intel_mid_dma_pci = {
+	.name		=	"Intel MID DMA",
+	.id_table	=	intel_mid_dma_ids,
+	.probe		=	intel_mid_dma_probe,
+	.remove		=	__devexit_p(intel_mid_dma_remove),
+};
+
+static int __init intel_mid_dma_init(void)
+{
+	pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
+			INTEL_MID_DMA_DRIVER_VERSION);
+	return pci_register_driver(&intel_mid_dma_pci);
+}
+fs_initcall(intel_mid_dma_init);
+
+static void __exit intel_mid_dma_exit(void)
+{
+	pci_unregister_driver(&intel_mid_dma_pci);
+}
+module_exit(intel_mid_dma_exit);
+
+MODULE_AUTHOR("Vinod Koul <vinod.koul@intel.com>");
+MODULE_DESCRIPTION("Intel (R) MID DMAC Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(INTEL_MID_DMA_DRIVER_VERSION);
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
new file mode 100644
index 00000000000..d81aa658ab0
--- /dev/null
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -0,0 +1,260 @@
+/*
+ *  intel_mid_dma_regs.h - Intel MID DMA Drivers
+ *
+ *  Copyright (C) 2008-10 Intel Corp
+ *  Author: Vinod Koul <vinod.koul@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *
+ */
+#ifndef __INTEL_MID_DMAC_REGS_H__
+#define __INTEL_MID_DMAC_REGS_H__
+
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/pci_ids.h>
+
+#define INTEL_MID_DMA_DRIVER_VERSION "1.0.5"
+
+#define	REG_BIT0		0x00000001
+#define	REG_BIT8		0x00000100
+
+#define UNMASK_INTR_REG(chan_num) \
+	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
+
+#define ENABLE_CHANNEL(chan_num) \
+	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+
+#define DESCS_PER_CHANNEL	16
+/*DMA Registers*/
+/*registers associated with channel programming*/
+#define DMA_REG_SIZE		0x400
+#define DMA_CH_SIZE		0x58
+
+/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
+#define SAR			0x00 /* Source Address Register*/
+#define DAR			0x08 /* Destination Address Register*/
+#define CTL_LOW			0x18 /* Control Register*/
+#define CTL_HIGH		0x1C /* Control Register*/
+#define CFG_LOW			0x40 /* Configuration Register Low*/
+#define CFG_HIGH		0x44 /* Configuration Register high*/
+
+#define STATUS_TFR		0x2E8
+#define STATUS_BLOCK		0x2F0
+#define STATUS_ERR		0x308
+
+#define RAW_TFR			0x2C0
+#define RAW_BLOCK		0x2C8
+#define RAW_ERR			0x2E0
+
+#define MASK_TFR		0x310
+#define MASK_BLOCK		0x318
+#define MASK_SRC_TRAN		0x320
+#define MASK_DST_TRAN		0x328
+#define MASK_ERR		0x330
+
+#define CLEAR_TFR		0x338
+#define CLEAR_BLOCK		0x340
+#define CLEAR_SRC_TRAN		0x348
+#define CLEAR_DST_TRAN		0x350
+#define CLEAR_ERR		0x358
+
+#define INTR_STATUS		0x360
+#define DMA_CFG			0x398
+#define DMA_CHAN_EN		0x3A0
+
+/*DMA channel control registers*/
+union intel_mid_dma_ctl_lo {
+	struct {
+		u32	int_en:1;	/*enable or disable interrupts*/
+					/*should be 0*/
+		u32	dst_tr_width:3;	/*destination transfer width*/
+					/*usually 32 bits = 010*/
+		u32	src_tr_width:3; /*source transfer width*/
+					/*usually 32 bits = 010*/
+		u32	dinc:2;		/*destination address inc/dec*/
+					/*For mem:INC=00, Periphral NoINC=11*/
+		u32	sinc:2;		/*source address inc or dec, as above*/
+		u32	dst_msize:3;	/*destination burst transaction length*/
+					/*always = 16 ie 011*/
+		u32	src_msize:3;	/*source burst transaction length*/
+					/*always = 16 ie 011*/
+		u32	reser1:3;
+		u32	tt_fc:3;	/*transfer type and flow controller*/
+					/*M-M = 000
+					  P-M = 010
+					  M-P = 001*/
+		u32	dms:2;		/*destination master select = 0*/
+		u32	sms:2;		/*source master select = 0*/
+		u32	llp_dst_en:1;	/*enable/disable destination LLP = 0*/
+		u32	llp_src_en:1;	/*enable/disable source LLP = 0*/
+		u32	reser2:3;
+	} ctlx;
+	u32	ctl_lo;
+};
+
+union intel_mid_dma_ctl_hi {
+	struct {
+		u32	block_ts:12;	/*block transfer size*/
+					/*configured by DMAC*/
+		u32	reser:20;
+	} ctlx;
+	u32	ctl_hi;
+
+};
+
+/*DMA channel configuration registers*/
+union intel_mid_dma_cfg_lo {
+	struct {
+		u32	reser1:5;
+		u32	ch_prior:3;	/*channel priority = 0*/
+		u32	ch_susp:1;	/*channel suspend = 0*/
+		u32	fifo_empty:1;	/*FIFO empty or not R bit = 0*/
+		u32	hs_sel_dst:1;	/*select HW/SW destn handshaking*/
+					/*HW = 0, SW = 1*/
+		u32	hs_sel_src:1;	/*select HW/SW src handshaking*/
+		u32	reser2:6;
+		u32	dst_hs_pol:1;	/*dest HS interface polarity*/
+		u32	src_hs_pol:1;	/*src HS interface polarity*/
+		u32	max_abrst:10;	/*max AMBA burst len = 0 (no sw limit*/
+		u32	reload_src:1;	/*auto reload src addr =1 if src is P*/
+		u32	reload_dst:1;	/*AR destn addr =1 if dstn is P*/
+	} cfgx;
+	u32	cfg_lo;
+};
+
+union intel_mid_dma_cfg_hi {
+	struct {
+		u32	fcmode:1;	/*flow control mode = 1*/
+		u32	fifo_mode:1;	/*FIFO mode select = 1*/
+		u32	protctl:3;	/*protection control = 0*/
+		u32	rsvd:2;
+		u32	src_per:4;	/*src hw HS interface*/
+		u32	dst_per:4;	/*dstn hw HS interface*/
+		u32	reser2:17;
+	} cfgx;
+	u32	cfg_hi;
+};
+
+/**
+ * struct intel_mid_dma_chan - internal mid representation of a DMA channel
+ * @chan: dma_chan strcture represetation for mid chan
+ * @ch_regs: MMIO register space pointer to channel register
+ * @dma_base: MMIO register space DMA engine base pointer
+ * @ch_id: DMA channel id
+ * @lock: channel spinlock
+ * @completed: DMA cookie
+ * @active_list: current active descriptors
+ * @queue: current queued up descriptors
+ * @free_list: current free descriptors
+ * @slave: dma slave struture
+ * @descs_allocated: total number of decsiptors allocated
+ * @dma: dma device struture pointer
+ * @in_use: bool representing if ch is in use or not
+ */
+struct intel_mid_dma_chan {
+	struct dma_chan		chan;
+	void __iomem		*ch_regs;
+	void __iomem		*dma_base;
+	int			ch_id;
+	spinlock_t		lock;
+	dma_cookie_t		completed;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	struct intel_mid_dma_slave	*slave;
+	unsigned int		descs_allocated;
+	struct middma_device	*dma;
+	bool			in_use;
+};
+
+static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
+						struct dma_chan *chan)
+{
+	return container_of(chan, struct intel_mid_dma_chan, chan);
+}
+
+/**
+ * struct middma_device - internal representation of a DMA device
+ * @pdev: PCI device
+ * @dma_base: MMIO register space pointer of DMA
+ * @dma_pool: for allocating DMA descriptors
+ * @common: embedded struct dma_device
+ * @tasklet: dma tasklet for processing interrupts
+ * @ch: per channel data
+ * @pci_id: DMA device PCI ID
+ * @intr_mask: Interrupt mask to be used
+ * @mask_reg: MMIO register for periphral mask
+ * @chan_base: Base ch index (read from driver data)
+ * @max_chan: max number of chs supported (from drv_data)
+ * @block_size: Block size of DMA transfer supported (from drv_data)
+ * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
+ */
+struct middma_device {
+	struct pci_dev		*pdev;
+	void __iomem		*dma_base;
+	struct pci_pool		*dma_pool;
+	struct dma_device	common;
+	struct tasklet_struct   tasklet;
+	struct intel_mid_dma_chan ch[MAX_CHAN];
+	unsigned int		pci_id;
+	unsigned int		intr_mask;
+	void __iomem		*mask_reg;
+	int			chan_base;
+	int			max_chan;
+	int			block_size;
+	unsigned int		pimr_mask;
+};
+
+static inline struct middma_device *to_middma_device(struct dma_device *common)
+{
+	return container_of(common, struct middma_device, common);
+}
+
+struct intel_mid_dma_desc {
+	void __iomem			*block; /*ch ptr*/
+	struct list_head		desc_node;
+	struct dma_async_tx_descriptor	txd;
+	size_t				len;
+	dma_addr_t			sar;
+	dma_addr_t			dar;
+	u32				cfg_hi;
+	u32				cfg_lo;
+	u32				ctl_lo;
+	u32				ctl_hi;
+	dma_addr_t			next;
+	enum dma_data_direction		dirn;
+	enum dma_status			status;
+	enum intel_mid_dma_width	width; /*width of DMA txn*/
+	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
+
+};
+
+static inline int test_ch_en(void __iomem *dma, u32 ch_no)
+{
+	u32 en_reg = ioread32(dma + DMA_CHAN_EN);
+	return (en_reg >> ch_no) & 0x1;
+}
+
+static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
+		(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct intel_mid_dma_desc, txd);
+}
+#endif /*__INTEL_MID_DMAC_REGS_H__*/
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 6d3a73b57e5..5216c8a92a2 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -97,6 +97,7 @@ struct ioat_chan_common {
 	#define IOAT_RESET_PENDING 2
 	#define IOAT_KOBJ_INIT_FAIL 3
 	#define IOAT_RESHAPE_PENDING 4
+	#define IOAT_RUN 5
 	struct timer_list timer;
 	#define COMPLETION_TIMEOUT msecs_to_jiffies(100)
 	#define IDLE_TIMEOUT msecs_to_jiffies(2000)
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index 3c8b32a8379..216f9d383b5 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -287,7 +287,10 @@ void ioat2_timer_event(unsigned long data)
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
 			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
 				__func__, chanerr);
-			BUG_ON(is_ioat_bug(chanerr));
+			if (test_bit(IOAT_RUN, &chan->state))
+				BUG_ON(is_ioat_bug(chanerr));
+			else /* we never got off the ground */
+				return;
 		}
 
 		/* if we haven't made progress and we have already
@@ -492,6 +495,8 @@ static struct ioat_ring_ent **ioat2_alloc_ring(struct dma_chan *c, int order, gf
 	return ring;
 }
 
+void ioat2_free_chan_resources(struct dma_chan *c);
+
 /* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring
  * @chan: channel to be initialized
  */
@@ -500,6 +505,7 @@ int ioat2_alloc_chan_resources(struct dma_chan *c)
 	struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
 	struct ioat_chan_common *chan = &ioat->base;
 	struct ioat_ring_ent **ring;
+	u64 status;
 	int order;
 
 	/* have we already been set up? */
@@ -540,7 +546,20 @@ int ioat2_alloc_chan_resources(struct dma_chan *c)
 	tasklet_enable(&chan->cleanup_task);
 	ioat2_start_null_desc(ioat);
 
-	return 1 << ioat->alloc_order;
+	/* check that we got off the ground */
+	udelay(5);
+	status = ioat_chansts(chan);
+	if (is_ioat_active(status) || is_ioat_idle(status)) {
+		set_bit(IOAT_RUN, &chan->state);
+		return 1 << ioat->alloc_order;
+	} else {
+		u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+
+		dev_WARN(to_dev(chan),
+			"failed to start channel chanerr: %#x\n", chanerr);
+		ioat2_free_chan_resources(c);
+		return -EFAULT;
+	}
 }
 
 bool reshape_ring(struct ioat2_dma_chan *ioat, int order)
@@ -778,6 +797,7 @@ void ioat2_free_chan_resources(struct dma_chan *c)
 	del_timer_sync(&chan->timer);
 	device->cleanup_fn((unsigned long) c);
 	device->reset_hw(chan);
+	clear_bit(IOAT_RUN, &chan->state);
 
 	spin_lock_bh(&chan->cleanup_lock);
 	spin_lock_bh(&ioat->prep_lock);
diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c
index 1cdd22e1051..d0f49909847 100644
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -361,7 +361,10 @@ static void ioat3_timer_event(unsigned long data)
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
 			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
 				__func__, chanerr);
-			BUG_ON(is_ioat_bug(chanerr));
+			if (test_bit(IOAT_RUN, &chan->state))
+				BUG_ON(is_ioat_bug(chanerr));
+			else /* we never got off the ground */
+				return;
 		}
 
 		/* if we haven't made progress and we have already
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
new file mode 100644
index 00000000000..3533948b88b
--- /dev/null
+++ b/drivers/dma/pch_dma.c
@@ -0,0 +1,957 @@
+/*
+ * Topcliff PCH DMA controller driver
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pch_dma.h>
+
+#define DRV_NAME "pch-dma"
+
+#define DMA_CTL0_DISABLE		0x0
+#define DMA_CTL0_SG			0x1
+#define DMA_CTL0_ONESHOT		0x2
+#define DMA_CTL0_MODE_MASK_BITS		0x3
+#define DMA_CTL0_DIR_SHIFT_BITS		2
+#define DMA_CTL0_BITS_PER_CH		4
+
+#define DMA_CTL2_START_SHIFT_BITS	8
+#define DMA_CTL2_IRQ_ENABLE_MASK	((1UL << DMA_CTL2_START_SHIFT_BITS) - 1)
+
+#define DMA_STATUS_IDLE			0x0
+#define DMA_STATUS_DESC_READ		0x1
+#define DMA_STATUS_WAIT			0x2
+#define DMA_STATUS_ACCESS		0x3
+#define DMA_STATUS_BITS_PER_CH		2
+#define DMA_STATUS_MASK_BITS		0x3
+#define DMA_STATUS_SHIFT_BITS		16
+#define DMA_STATUS_IRQ(x)		(0x1 << (x))
+#define DMA_STATUS_ERR(x)		(0x1 << ((x) + 8))
+
+#define DMA_DESC_WIDTH_SHIFT_BITS	12
+#define DMA_DESC_WIDTH_1_BYTE		(0x3 << DMA_DESC_WIDTH_SHIFT_BITS)
+#define DMA_DESC_WIDTH_2_BYTES		(0x2 << DMA_DESC_WIDTH_SHIFT_BITS)
+#define DMA_DESC_WIDTH_4_BYTES		(0x0 << DMA_DESC_WIDTH_SHIFT_BITS)
+#define DMA_DESC_MAX_COUNT_1_BYTE	0x3FF
+#define DMA_DESC_MAX_COUNT_2_BYTES	0x3FF
+#define DMA_DESC_MAX_COUNT_4_BYTES	0x7FF
+#define DMA_DESC_END_WITHOUT_IRQ	0x0
+#define DMA_DESC_END_WITH_IRQ		0x1
+#define DMA_DESC_FOLLOW_WITHOUT_IRQ	0x2
+#define DMA_DESC_FOLLOW_WITH_IRQ	0x3
+
+#define MAX_CHAN_NR			8
+
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+		 "initial descriptors per channel (default: 64)");
+
+struct pch_dma_desc_regs {
+	u32	dev_addr;
+	u32	mem_addr;
+	u32	size;
+	u32	next;
+};
+
+struct pch_dma_regs {
+	u32	dma_ctl0;
+	u32	dma_ctl1;
+	u32	dma_ctl2;
+	u32	reserved1;
+	u32	dma_sts0;
+	u32	dma_sts1;
+	u32	reserved2;
+	u32	reserved3;
+	struct pch_dma_desc_regs desc[0];
+};
+
+struct pch_dma_desc {
+	struct pch_dma_desc_regs regs;
+	struct dma_async_tx_descriptor txd;
+	struct list_head	desc_node;
+	struct list_head	tx_list;
+};
+
+struct pch_dma_chan {
+	struct dma_chan		chan;
+	void __iomem *membase;
+	enum dma_data_direction	dir;
+	struct tasklet_struct	tasklet;
+	unsigned long		err_status;
+
+	spinlock_t		lock;
+
+	dma_cookie_t		completed_cookie;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	unsigned int		descs_allocated;
+};
+
+#define PDC_DEV_ADDR	0x00
+#define PDC_MEM_ADDR	0x04
+#define PDC_SIZE	0x08
+#define PDC_NEXT	0x0C
+
+#define channel_readl(pdc, name) \
+	readl((pdc)->membase + PDC_##name)
+#define channel_writel(pdc, name, val) \
+	writel((val), (pdc)->membase + PDC_##name)
+
+struct pch_dma {
+	struct dma_device	dma;
+	void __iomem *membase;
+	struct pci_pool		*pool;
+	struct pch_dma_regs	regs;
+	struct pch_dma_desc_regs ch_regs[MAX_CHAN_NR];
+	struct pch_dma_chan	channels[0];
+};
+
+#define PCH_DMA_CTL0	0x00
+#define PCH_DMA_CTL1	0x04
+#define PCH_DMA_CTL2	0x08
+#define PCH_DMA_STS0	0x10
+#define PCH_DMA_STS1	0x14
+
+#define dma_readl(pd, name) \
+	readl((pd)->membase + PCH_DMA_##name)
+#define dma_writel(pd, name, val) \
+	writel((val), (pd)->membase + PCH_DMA_##name)
+
+static inline struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct pch_dma_desc, txd);
+}
+
+static inline struct pch_dma_chan *to_pd_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct pch_dma_chan, chan);
+}
+
+static inline struct pch_dma *to_pd(struct dma_device *ddev)
+{
+	return container_of(ddev, struct pch_dma, dma);
+}
+
+static inline struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+
+static inline struct device *chan2parent(struct dma_chan *chan)
+{
+	return chan->dev->device.parent;
+}
+
+static inline struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan)
+{
+	return list_first_entry(&pd_chan->active_list,
+				struct pch_dma_desc, desc_node);
+}
+
+static inline struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan)
+{
+	return list_first_entry(&pd_chan->queue,
+				struct pch_dma_desc, desc_node);
+}
+
+static void pdc_enable_irq(struct dma_chan *chan, int enable)
+{
+	struct pch_dma *pd = to_pd(chan->device);
+	u32 val;
+
+	val = dma_readl(pd, CTL2);
+
+	if (enable)
+		val |= 0x1 << chan->chan_id;
+	else
+		val &= ~(0x1 << chan->chan_id);
+
+	dma_writel(pd, CTL2, val);
+
+	dev_dbg(chan2dev(chan), "pdc_enable_irq: chan %d -> %x\n",
+		chan->chan_id, val);
+}
+
+static void pdc_set_dir(struct dma_chan *chan)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	struct pch_dma *pd = to_pd(chan->device);
+	u32 val;
+
+	val = dma_readl(pd, CTL0);
+
+	if (pd_chan->dir == DMA_TO_DEVICE)
+		val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+			       DMA_CTL0_DIR_SHIFT_BITS);
+	else
+		val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id +
+				 DMA_CTL0_DIR_SHIFT_BITS));
+
+	dma_writel(pd, CTL0, val);
+
+	dev_dbg(chan2dev(chan), "pdc_set_dir: chan %d -> %x\n",
+		chan->chan_id, val);
+}
+
+static void pdc_set_mode(struct dma_chan *chan, u32 mode)
+{
+	struct pch_dma *pd = to_pd(chan->device);
+	u32 val;
+
+	val = dma_readl(pd, CTL0);
+
+	val &= ~(DMA_CTL0_MODE_MASK_BITS <<
+		(DMA_CTL0_BITS_PER_CH * chan->chan_id));
+	val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id);
+
+	dma_writel(pd, CTL0, val);
+
+	dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n",
+		chan->chan_id, val);
+}
+
+static u32 pdc_get_status(struct pch_dma_chan *pd_chan)
+{
+	struct pch_dma *pd = to_pd(pd_chan->chan.device);
+	u32 val;
+
+	val = dma_readl(pd, STS0);
+	return DMA_STATUS_MASK_BITS & (val >> (DMA_STATUS_SHIFT_BITS +
+			DMA_STATUS_BITS_PER_CH * pd_chan->chan.chan_id));
+}
+
+static bool pdc_is_idle(struct pch_dma_chan *pd_chan)
+{
+	if (pdc_get_status(pd_chan) == DMA_STATUS_IDLE)
+		return true;
+	else
+		return false;
+}
+
+static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc)
+{
+	struct pch_dma *pd = to_pd(pd_chan->chan.device);
+	u32 val;
+
+	if (!pdc_is_idle(pd_chan)) {
+		dev_err(chan2dev(&pd_chan->chan),
+			"BUG: Attempt to start non-idle channel\n");
+		return;
+	}
+
+	channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
+	channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
+	channel_writel(pd_chan, SIZE, desc->regs.size);
+	channel_writel(pd_chan, NEXT, desc->regs.next);
+
+	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n",
+		pd_chan->chan.chan_id, desc->regs.dev_addr);
+	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n",
+		pd_chan->chan.chan_id, desc->regs.mem_addr);
+	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> size: %x\n",
+		pd_chan->chan.chan_id, desc->regs.size);
+	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n",
+		pd_chan->chan.chan_id, desc->regs.next);
+
+	if (list_empty(&desc->tx_list))
+		pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT);
+	else
+		pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
+
+	val = dma_readl(pd, CTL2);
+	val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
+	dma_writel(pd, CTL2, val);
+}
+
+static void pdc_chain_complete(struct pch_dma_chan *pd_chan,
+			       struct pch_dma_desc *desc)
+{
+	struct dma_async_tx_descriptor *txd = &desc->txd;
+	dma_async_tx_callback callback = txd->callback;
+	void *param = txd->callback_param;
+
+	list_splice_init(&desc->tx_list, &pd_chan->free_list);
+	list_move(&desc->desc_node, &pd_chan->free_list);
+
+	if (callback)
+		callback(param);
+}
+
+static void pdc_complete_all(struct pch_dma_chan *pd_chan)
+{
+	struct pch_dma_desc *desc, *_d;
+	LIST_HEAD(list);
+
+	BUG_ON(!pdc_is_idle(pd_chan));
+
+	if (!list_empty(&pd_chan->queue))
+		pdc_dostart(pd_chan, pdc_first_queued(pd_chan));
+
+	list_splice_init(&pd_chan->active_list, &list);
+	list_splice_init(&pd_chan->queue, &pd_chan->active_list);
+
+	list_for_each_entry_safe(desc, _d, &list, desc_node)
+		pdc_chain_complete(pd_chan, desc);
+}
+
+static void pdc_handle_error(struct pch_dma_chan *pd_chan)
+{
+	struct pch_dma_desc *bad_desc;
+
+	bad_desc = pdc_first_active(pd_chan);
+	list_del(&bad_desc->desc_node);
+
+	list_splice_init(&pd_chan->queue, pd_chan->active_list.prev);
+
+	if (!list_empty(&pd_chan->active_list))
+		pdc_dostart(pd_chan, pdc_first_active(pd_chan));
+
+	dev_crit(chan2dev(&pd_chan->chan), "Bad descriptor submitted\n");
+	dev_crit(chan2dev(&pd_chan->chan), "descriptor cookie: %d\n",
+		 bad_desc->txd.cookie);
+
+	pdc_chain_complete(pd_chan, bad_desc);
+}
+
+static void pdc_advance_work(struct pch_dma_chan *pd_chan)
+{
+	if (list_empty(&pd_chan->active_list) ||
+		list_is_singular(&pd_chan->active_list)) {
+		pdc_complete_all(pd_chan);
+	} else {
+		pdc_chain_complete(pd_chan, pdc_first_active(pd_chan));
+		pdc_dostart(pd_chan, pdc_first_active(pd_chan));
+	}
+}
+
+static dma_cookie_t pdc_assign_cookie(struct pch_dma_chan *pd_chan,
+				      struct pch_dma_desc *desc)
+{
+	dma_cookie_t cookie = pd_chan->chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	pd_chan->chan.cookie = cookie;
+	desc->txd.cookie = cookie;
+
+	return cookie;
+}
+
+static dma_cookie_t pd_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+	struct pch_dma_desc *desc = to_pd_desc(txd);
+	struct pch_dma_chan *pd_chan = to_pd_chan(txd->chan);
+	dma_cookie_t cookie;
+
+	spin_lock_bh(&pd_chan->lock);
+	cookie = pdc_assign_cookie(pd_chan, desc);
+
+	if (list_empty(&pd_chan->active_list)) {
+		list_add_tail(&desc->desc_node, &pd_chan->active_list);
+		pdc_dostart(pd_chan, desc);
+	} else {
+		list_add_tail(&desc->desc_node, &pd_chan->queue);
+	}
+
+	spin_unlock_bh(&pd_chan->lock);
+	return 0;
+}
+
+static struct pch_dma_desc *pdc_alloc_desc(struct dma_chan *chan, gfp_t flags)
+{
+	struct pch_dma_desc *desc = NULL;
+	struct pch_dma *pd = to_pd(chan->device);
+	dma_addr_t addr;
+
+	desc = pci_pool_alloc(pd->pool, GFP_KERNEL, &addr);
+	if (desc) {
+		memset(desc, 0, sizeof(struct pch_dma_desc));
+		INIT_LIST_HEAD(&desc->tx_list);
+		dma_async_tx_descriptor_init(&desc->txd, chan);
+		desc->txd.tx_submit = pd_tx_submit;
+		desc->txd.flags = DMA_CTRL_ACK;
+		desc->txd.phys = addr;
+	}
+
+	return desc;
+}
+
+static struct pch_dma_desc *pdc_desc_get(struct pch_dma_chan *pd_chan)
+{
+	struct pch_dma_desc *desc, *_d;
+	struct pch_dma_desc *ret = NULL;
+	int i;
+
+	spin_lock_bh(&pd_chan->lock);
+	list_for_each_entry_safe(desc, _d, &pd_chan->free_list, desc_node) {
+		i++;
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del(&desc->desc_node);
+			ret = desc;
+			break;
+		}
+		dev_dbg(chan2dev(&pd_chan->chan), "desc %p not ACKed\n", desc);
+	}
+	spin_unlock_bh(&pd_chan->lock);
+	dev_dbg(chan2dev(&pd_chan->chan), "scanned %d descriptors\n", i);
+
+	if (!ret) {
+		ret = pdc_alloc_desc(&pd_chan->chan, GFP_NOIO);
+		if (ret) {
+			spin_lock_bh(&pd_chan->lock);
+			pd_chan->descs_allocated++;
+			spin_unlock_bh(&pd_chan->lock);
+		} else {
+			dev_err(chan2dev(&pd_chan->chan),
+				"failed to alloc desc\n");
+		}
+	}
+
+	return ret;
+}
+
+static void pdc_desc_put(struct pch_dma_chan *pd_chan,
+			 struct pch_dma_desc *desc)
+{
+	if (desc) {
+		spin_lock_bh(&pd_chan->lock);
+		list_splice_init(&desc->tx_list, &pd_chan->free_list);
+		list_add(&desc->desc_node, &pd_chan->free_list);
+		spin_unlock_bh(&pd_chan->lock);
+	}
+}
+
+static int pd_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	struct pch_dma_desc *desc;
+	LIST_HEAD(tmp_list);
+	int i;
+
+	if (!pdc_is_idle(pd_chan)) {
+		dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+		return -EIO;
+	}
+
+	if (!list_empty(&pd_chan->free_list))
+		return pd_chan->descs_allocated;
+
+	for (i = 0; i < init_nr_desc_per_channel; i++) {
+		desc = pdc_alloc_desc(chan, GFP_KERNEL);
+
+		if (!desc) {
+			dev_warn(chan2dev(chan),
+				"Only allocated %d initial descriptors\n", i);
+			break;
+		}
+
+		list_add_tail(&desc->desc_node, &tmp_list);
+	}
+
+	spin_lock_bh(&pd_chan->lock);
+	list_splice(&tmp_list, &pd_chan->free_list);
+	pd_chan->descs_allocated = i;
+	pd_chan->completed_cookie = chan->cookie = 1;
+	spin_unlock_bh(&pd_chan->lock);
+
+	pdc_enable_irq(chan, 1);
+	pdc_set_dir(chan);
+
+	return pd_chan->descs_allocated;
+}
+
+static void pd_free_chan_resources(struct dma_chan *chan)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	struct pch_dma *pd = to_pd(chan->device);
+	struct pch_dma_desc *desc, *_d;
+	LIST_HEAD(tmp_list);
+
+	BUG_ON(!pdc_is_idle(pd_chan));
+	BUG_ON(!list_empty(&pd_chan->active_list));
+	BUG_ON(!list_empty(&pd_chan->queue));
+
+	spin_lock_bh(&pd_chan->lock);
+	list_splice_init(&pd_chan->free_list, &tmp_list);
+	pd_chan->descs_allocated = 0;
+	spin_unlock_bh(&pd_chan->lock);
+
+	list_for_each_entry_safe(desc, _d, &tmp_list, desc_node)
+		pci_pool_free(pd->pool, desc, desc->txd.phys);
+
+	pdc_enable_irq(chan, 0);
+}
+
+static enum dma_status pd_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+				    struct dma_tx_state *txstate)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	dma_cookie_t last_used;
+	dma_cookie_t last_completed;
+	int ret;
+
+	spin_lock_bh(&pd_chan->lock);
+	last_completed = pd_chan->completed_cookie;
+	last_used = chan->cookie;
+	spin_unlock_bh(&pd_chan->lock);
+
+	ret = dma_async_is_complete(cookie, last_completed, last_used);
+
+	dma_set_tx_state(txstate, last_completed, last_used, 0);
+
+	return ret;
+}
+
+static void pd_issue_pending(struct dma_chan *chan)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+
+	if (pdc_is_idle(pd_chan)) {
+		spin_lock_bh(&pd_chan->lock);
+		pdc_advance_work(pd_chan);
+		spin_unlock_bh(&pd_chan->lock);
+	}
+}
+
+static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan,
+			struct scatterlist *sgl, unsigned int sg_len,
+			enum dma_data_direction direction, unsigned long flags)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	struct pch_dma_slave *pd_slave = chan->private;
+	struct pch_dma_desc *first = NULL;
+	struct pch_dma_desc *prev = NULL;
+	struct pch_dma_desc *desc = NULL;
+	struct scatterlist *sg;
+	dma_addr_t reg;
+	int i;
+
+	if (unlikely(!sg_len)) {
+		dev_info(chan2dev(chan), "prep_slave_sg: length is zero!\n");
+		return NULL;
+	}
+
+	if (direction == DMA_FROM_DEVICE)
+		reg = pd_slave->rx_reg;
+	else if (direction == DMA_TO_DEVICE)
+		reg = pd_slave->tx_reg;
+	else
+		return NULL;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		desc = pdc_desc_get(pd_chan);
+
+		if (!desc)
+			goto err_desc_get;
+
+		desc->regs.dev_addr = reg;
+		desc->regs.mem_addr = sg_phys(sg);
+		desc->regs.size = sg_dma_len(sg);
+		desc->regs.next = DMA_DESC_FOLLOW_WITHOUT_IRQ;
+
+		switch (pd_slave->width) {
+		case PCH_DMA_WIDTH_1_BYTE:
+			if (desc->regs.size > DMA_DESC_MAX_COUNT_1_BYTE)
+				goto err_desc_get;
+			desc->regs.size |= DMA_DESC_WIDTH_1_BYTE;
+			break;
+		case PCH_DMA_WIDTH_2_BYTES:
+			if (desc->regs.size > DMA_DESC_MAX_COUNT_2_BYTES)
+				goto err_desc_get;
+			desc->regs.size |= DMA_DESC_WIDTH_2_BYTES;
+			break;
+		case PCH_DMA_WIDTH_4_BYTES:
+			if (desc->regs.size > DMA_DESC_MAX_COUNT_4_BYTES)
+				goto err_desc_get;
+			desc->regs.size |= DMA_DESC_WIDTH_4_BYTES;
+			break;
+		default:
+			goto err_desc_get;
+		}
+
+
+		if (!first) {
+			first = desc;
+		} else {
+			prev->regs.next |= desc->txd.phys;
+			list_add_tail(&desc->desc_node, &first->tx_list);
+		}
+
+		prev = desc;
+	}
+
+	if (flags & DMA_PREP_INTERRUPT)
+		desc->regs.next = DMA_DESC_END_WITH_IRQ;
+	else
+		desc->regs.next = DMA_DESC_END_WITHOUT_IRQ;
+
+	first->txd.cookie = -EBUSY;
+	desc->txd.flags = flags;
+
+	return &first->txd;
+
+err_desc_get:
+	dev_err(chan2dev(chan), "failed to get desc or wrong parameters\n");
+	pdc_desc_put(pd_chan, first);
+	return NULL;
+}
+
+static int pd_device_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+			     unsigned long arg)
+{
+	struct pch_dma_chan *pd_chan = to_pd_chan(chan);
+	struct pch_dma_desc *desc, *_d;
+	LIST_HEAD(list);
+
+	if (cmd != DMA_TERMINATE_ALL)
+		return -ENXIO;
+
+	spin_lock_bh(&pd_chan->lock);
+
+	pdc_set_mode(&pd_chan->chan, DMA_CTL0_DISABLE);
+
+	list_splice_init(&pd_chan->active_list, &list);
+	list_splice_init(&pd_chan->queue, &list);
+
+	list_for_each_entry_safe(desc, _d, &list, desc_node)
+		pdc_chain_complete(pd_chan, desc);
+
+	spin_unlock_bh(&pd_chan->lock);
+
+
+	return 0;
+}
+
+static void pdc_tasklet(unsigned long data)
+{
+	struct pch_dma_chan *pd_chan = (struct pch_dma_chan *)data;
+
+	if (!pdc_is_idle(pd_chan)) {
+		dev_err(chan2dev(&pd_chan->chan),
+			"BUG: handle non-idle channel in tasklet\n");
+		return;
+	}
+
+	spin_lock_bh(&pd_chan->lock);
+	if (test_and_clear_bit(0, &pd_chan->err_status))
+		pdc_handle_error(pd_chan);
+	else
+		pdc_advance_work(pd_chan);
+	spin_unlock_bh(&pd_chan->lock);
+}
+
+static irqreturn_t pd_irq(int irq, void *devid)
+{
+	struct pch_dma *pd = (struct pch_dma *)devid;
+	struct pch_dma_chan *pd_chan;
+	u32 sts0;
+	int i;
+	int ret = IRQ_NONE;
+
+	sts0 = dma_readl(pd, STS0);
+
+	dev_dbg(pd->dma.dev, "pd_irq sts0: %x\n", sts0);
+
+	for (i = 0; i < pd->dma.chancnt; i++) {
+		pd_chan = &pd->channels[i];
+
+		if (sts0 & DMA_STATUS_IRQ(i)) {
+			if (sts0 & DMA_STATUS_ERR(i))
+				set_bit(0, &pd_chan->err_status);
+
+			tasklet_schedule(&pd_chan->tasklet);
+			ret = IRQ_HANDLED;
+		}
+
+	}
+
+	/* clear interrupt bits in status register */
+	dma_writel(pd, STS0, sts0);
+
+	return ret;
+}
+
+static void pch_dma_save_regs(struct pch_dma *pd)
+{
+	struct pch_dma_chan *pd_chan;
+	struct dma_chan *chan, *_c;
+	int i = 0;
+
+	pd->regs.dma_ctl0 = dma_readl(pd, CTL0);
+	pd->regs.dma_ctl1 = dma_readl(pd, CTL1);
+	pd->regs.dma_ctl2 = dma_readl(pd, CTL2);
+
+	list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
+		pd_chan = to_pd_chan(chan);
+
+		pd->ch_regs[i].dev_addr = channel_readl(pd_chan, DEV_ADDR);
+		pd->ch_regs[i].mem_addr = channel_readl(pd_chan, MEM_ADDR);
+		pd->ch_regs[i].size = channel_readl(pd_chan, SIZE);
+		pd->ch_regs[i].next = channel_readl(pd_chan, NEXT);
+
+		i++;
+	}
+}
+
+static void pch_dma_restore_regs(struct pch_dma *pd)
+{
+	struct pch_dma_chan *pd_chan;
+	struct dma_chan *chan, *_c;
+	int i = 0;
+
+	dma_writel(pd, CTL0, pd->regs.dma_ctl0);
+	dma_writel(pd, CTL1, pd->regs.dma_ctl1);
+	dma_writel(pd, CTL2, pd->regs.dma_ctl2);
+
+	list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) {
+		pd_chan = to_pd_chan(chan);
+
+		channel_writel(pd_chan, DEV_ADDR, pd->ch_regs[i].dev_addr);
+		channel_writel(pd_chan, MEM_ADDR, pd->ch_regs[i].mem_addr);
+		channel_writel(pd_chan, SIZE, pd->ch_regs[i].size);
+		channel_writel(pd_chan, NEXT, pd->ch_regs[i].next);
+
+		i++;
+	}
+}
+
+static int pch_dma_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct pch_dma *pd = pci_get_drvdata(pdev);
+
+	if (pd)
+		pch_dma_save_regs(pd);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+static int pch_dma_resume(struct pci_dev *pdev)
+{
+	struct pch_dma *pd = pci_get_drvdata(pdev);
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_dbg(&pdev->dev, "failed to enable device\n");
+		return err;
+	}
+
+	if (pd)
+		pch_dma_restore_regs(pd);
+
+	return 0;
+}
+
+static int __devinit pch_dma_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *id)
+{
+	struct pch_dma *pd;
+	struct pch_dma_regs *regs;
+	unsigned int nr_channels;
+	int err;
+	int i;
+
+	nr_channels = id->driver_data;
+	pd = kzalloc(sizeof(struct pch_dma)+
+		sizeof(struct pch_dma_chan) * nr_channels, GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+
+	pci_set_drvdata(pdev, pd);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot enable PCI device\n");
+		goto err_free_mem;
+	}
+
+	if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+		dev_err(&pdev->dev, "Cannot find proper base address\n");
+		goto err_disable_pdev;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
+		goto err_disable_pdev;
+	}
+
+	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (err) {
+		dev_err(&pdev->dev, "Cannot set proper DMA config\n");
+		goto err_free_res;
+	}
+
+	regs = pd->membase = pci_iomap(pdev, 1, 0);
+	if (!pd->membase) {
+		dev_err(&pdev->dev, "Cannot map MMIO registers\n");
+		err = -ENOMEM;
+		goto err_free_res;
+	}
+
+	pci_set_master(pdev);
+
+	err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		goto err_iounmap;
+	}
+
+	pd->pool = pci_pool_create("pch_dma_desc_pool", pdev,
+				   sizeof(struct pch_dma_desc), 4, 0);
+	if (!pd->pool) {
+		dev_err(&pdev->dev, "Failed to alloc DMA descriptors\n");
+		err = -ENOMEM;
+		goto err_free_irq;
+	}
+
+	pd->dma.dev = &pdev->dev;
+	pd->dma.chancnt = nr_channels;
+
+	INIT_LIST_HEAD(&pd->dma.channels);
+
+	for (i = 0; i < nr_channels; i++) {
+		struct pch_dma_chan *pd_chan = &pd->channels[i];
+
+		pd_chan->chan.device = &pd->dma;
+		pd_chan->chan.cookie = 1;
+		pd_chan->chan.chan_id = i;
+
+		pd_chan->membase = &regs->desc[i];
+
+		pd_chan->dir = (i % 2) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+		spin_lock_init(&pd_chan->lock);
+
+		INIT_LIST_HEAD(&pd_chan->active_list);
+		INIT_LIST_HEAD(&pd_chan->queue);
+		INIT_LIST_HEAD(&pd_chan->free_list);
+
+		tasklet_init(&pd_chan->tasklet, pdc_tasklet,
+			     (unsigned long)pd_chan);
+		list_add_tail(&pd_chan->chan.device_node, &pd->dma.channels);
+	}
+
+	dma_cap_zero(pd->dma.cap_mask);
+	dma_cap_set(DMA_PRIVATE, pd->dma.cap_mask);
+	dma_cap_set(DMA_SLAVE, pd->dma.cap_mask);
+
+	pd->dma.device_alloc_chan_resources = pd_alloc_chan_resources;
+	pd->dma.device_free_chan_resources = pd_free_chan_resources;
+	pd->dma.device_tx_status = pd_tx_status;
+	pd->dma.device_issue_pending = pd_issue_pending;
+	pd->dma.device_prep_slave_sg = pd_prep_slave_sg;
+	pd->dma.device_control = pd_device_control;
+
+	err = dma_async_device_register(&pd->dma);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register DMA device\n");
+		goto err_free_pool;
+	}
+
+	return 0;
+
+err_free_pool:
+	pci_pool_destroy(pd->pool);
+err_free_irq:
+	free_irq(pdev->irq, pd);
+err_iounmap:
+	pci_iounmap(pdev, pd->membase);
+err_free_res:
+	pci_release_regions(pdev);
+err_disable_pdev:
+	pci_disable_device(pdev);
+err_free_mem:
+	return err;
+}
+
+static void __devexit pch_dma_remove(struct pci_dev *pdev)
+{
+	struct pch_dma *pd = pci_get_drvdata(pdev);
+	struct pch_dma_chan *pd_chan;
+	struct dma_chan *chan, *_c;
+
+	if (pd) {
+		dma_async_device_unregister(&pd->dma);
+
+		list_for_each_entry_safe(chan, _c, &pd->dma.channels,
+					 device_node) {
+			pd_chan = to_pd_chan(chan);
+
+			tasklet_disable(&pd_chan->tasklet);
+			tasklet_kill(&pd_chan->tasklet);
+		}
+
+		pci_pool_destroy(pd->pool);
+		free_irq(pdev->irq, pd);
+		pci_iounmap(pdev, pd->membase);
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		kfree(pd);
+	}
+}
+
+/* PCI Device ID of DMA device */
+#define PCI_DEVICE_ID_PCH_DMA_8CH        0x8810
+#define PCI_DEVICE_ID_PCH_DMA_4CH        0x8815
+
+static const struct pci_device_id pch_dma_id_table[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_8CH), 8 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_DMA_4CH), 4 },
+};
+
+static struct pci_driver pch_dma_driver = {
+	.name		= DRV_NAME,
+	.id_table	= pch_dma_id_table,
+	.probe		= pch_dma_probe,
+	.remove		= __devexit_p(pch_dma_remove),
+#ifdef CONFIG_PM
+	.suspend	= pch_dma_suspend,
+	.resume		= pch_dma_resume,
+#endif
+};
+
+static int __init pch_dma_init(void)
+{
+	return pci_register_driver(&pch_dma_driver);
+}
+
+static void __exit pch_dma_exit(void)
+{
+	pci_unregister_driver(&pch_dma_driver);
+}
+
+module_init(pch_dma_init);
+module_exit(pch_dma_exit);
+
+MODULE_DESCRIPTION("Topcliff PCH DMA controller driver");
+MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index c426829f6ab..17e2600a00c 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -30,14 +30,16 @@
 /* Maximum iterations taken before giving up suspending a channel */
 #define D40_SUSPEND_MAX_IT 500
 
+/* Hardware requirement on LCLA alignment */
+#define LCLA_ALIGNMENT 0x40000
+/* Attempts before giving up to trying to get pages that are aligned */
+#define MAX_LCLA_ALLOC_ATTEMPTS 256
+
+/* Bit markings for allocation map */
 #define D40_ALLOC_FREE		(1 << 31)
 #define D40_ALLOC_PHY		(1 << 30)
 #define D40_ALLOC_LOG_FREE	0
 
-/* The number of free d40_desc to keep in memory before starting
- * to kfree() them */
-#define D40_DESC_CACHE_SIZE 50
-
 /* Hardware designer of the block */
 #define D40_PERIPHID2_DESIGNER 0x8
 
@@ -68,9 +70,9 @@ enum d40_command {
  */
 struct d40_lli_pool {
 	void	*base;
-	int	size;
+	int	 size;
 	/* Space for dst and src, plus an extra for padding */
-	u8	pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
+	u8	 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
 };
 
 /**
@@ -81,9 +83,10 @@ struct d40_lli_pool {
  * lli_len equals one.
  * @lli_log: Same as above but for logical channels.
  * @lli_pool: The pool with two entries pre-allocated.
- * @lli_len: Number of LLI's in lli_pool
- * @lli_tcount: Number of LLIs processed in the transfer. When equals lli_len
- * then this transfer job is done.
+ * @lli_len: Number of llis of current descriptor.
+ * @lli_count: Number of transfered llis.
+ * @lli_tx_len: Max number of LLIs per transfer, there can be
+ * many transfer for one descriptor.
  * @txd: DMA engine struct. Used for among other things for communication
  * during a transfer.
  * @node: List entry.
@@ -100,8 +103,9 @@ struct d40_desc {
 	struct d40_log_lli_bidir	 lli_log;
 
 	struct d40_lli_pool		 lli_pool;
-	u32				 lli_len;
-	u32				 lli_tcount;
+	int				 lli_len;
+	int				 lli_count;
+	u32				 lli_tx_len;
 
 	struct dma_async_tx_descriptor	 txd;
 	struct list_head		 node;
@@ -113,18 +117,20 @@ struct d40_desc {
 /**
  * struct d40_lcla_pool - LCLA pool settings and data.
  *
- * @base: The virtual address of LCLA.
- * @phy: Physical base address of LCLA.
- * @base_size: size of lcla.
+ * @base: The virtual address of LCLA. 18 bit aligned.
+ * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
+ * This pointer is only there for clean-up on error.
+ * @pages: The number of pages needed for all physical channels.
+ * Only used later for clean-up on error
  * @lock: Lock to protect the content in this struct.
- * @alloc_map: Mapping between physical channel and LCLA entries.
+ * @alloc_map: Bitmap mapping between physical channel and LCLA entries.
  * @num_blocks: The number of entries of alloc_map. Equals to the
  * number of physical channels.
  */
 struct d40_lcla_pool {
 	void		*base;
-	dma_addr_t	 phy;
-	resource_size_t  base_size;
+	void		*base_unaligned;
+	int		 pages;
 	spinlock_t	 lock;
 	u32		*alloc_map;
 	int		 num_blocks;
@@ -163,15 +169,14 @@ struct d40_base;
  * @pending_tx: The number of pending transfers. Used between interrupt handler
  * and tasklet.
  * @busy: Set to true when transfer is ongoing on this channel.
- * @phy_chan: Pointer to physical channel which this instance runs on.
+ * @phy_chan: Pointer to physical channel which this instance runs on. If this
+ * point is NULL, then the channel is not allocated.
  * @chan: DMA engine handle.
  * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
  * transfer and call client callback.
  * @client: Cliented owned descriptor list.
  * @active: Active descriptor.
  * @queue: Queued jobs.
- * @free: List of free descripts, ready to be reused.
- * @free_len: Number of descriptors in the free list.
  * @dma_cfg: The client configuration of this dma channel.
  * @base: Pointer to the device instance struct.
  * @src_def_cfg: Default cfg register setting for src.
@@ -195,8 +200,6 @@ struct d40_chan {
 	struct list_head		 client;
 	struct list_head		 active;
 	struct list_head		 queue;
-	struct list_head		 free;
-	int				 free_len;
 	struct stedma40_chan_cfg	 dma_cfg;
 	struct d40_base			*base;
 	/* Default register configurations */
@@ -205,6 +208,9 @@ struct d40_chan {
 	struct d40_def_lcsp		 log_def;
 	struct d40_lcla_elem		 lcla;
 	struct d40_log_lli_full		*lcpa;
+	/* Runtime reconfiguration */
+	dma_addr_t			runtime_addr;
+	enum dma_data_direction		runtime_direction;
 };
 
 /**
@@ -215,6 +221,7 @@ struct d40_chan {
  * the same physical register.
  * @dev: The device structure.
  * @virtbase: The virtual base address of the DMA's register.
+ * @rev: silicon revision detected.
  * @clk: Pointer to the DMA clock structure.
  * @phy_start: Physical memory start of the DMA registers.
  * @phy_size: Size of the DMA register map.
@@ -240,12 +247,14 @@ struct d40_chan {
  * @lcpa_base: The virtual mapped address of LCPA.
  * @phy_lcpa: The physical address of the LCPA.
  * @lcpa_size: The size of the LCPA area.
+ * @desc_slab: cache for descriptors.
  */
 struct d40_base {
 	spinlock_t			 interrupt_lock;
 	spinlock_t			 execmd_lock;
 	struct device			 *dev;
 	void __iomem			 *virtbase;
+	u8				  rev:4;
 	struct clk			 *clk;
 	phys_addr_t			  phy_start;
 	resource_size_t			  phy_size;
@@ -266,6 +275,7 @@ struct d40_base {
 	void				 *lcpa_base;
 	dma_addr_t			  phy_lcpa;
 	resource_size_t			  lcpa_size;
+	struct kmem_cache		 *desc_slab;
 };
 
 /**
@@ -365,11 +375,6 @@ static dma_cookie_t d40_assign_cookie(struct d40_chan *d40c,
 	return cookie;
 }
 
-static void d40_desc_reset(struct d40_desc *d40d)
-{
-	d40d->lli_tcount = 0;
-}
-
 static void d40_desc_remove(struct d40_desc *d40d)
 {
 	list_del(&d40d->node);
@@ -377,7 +382,6 @@ static void d40_desc_remove(struct d40_desc *d40d)
 
 static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
 {
-	struct d40_desc *desc;
 	struct d40_desc *d;
 	struct d40_desc *_d;
 
@@ -386,36 +390,21 @@ static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
 			if (async_tx_test_ack(&d->txd)) {
 				d40_pool_lli_free(d);
 				d40_desc_remove(d);
-				desc = d;
-				goto out;
+				break;
 			}
-	}
-
-	if (list_empty(&d40c->free)) {
-		/* Alloc new desc because we're out of used ones */
-		desc = kzalloc(sizeof(struct d40_desc), GFP_NOWAIT);
-		if (desc == NULL)
-			goto out;
-		INIT_LIST_HEAD(&desc->node);
 	} else {
-		/* Reuse an old desc. */
-		desc = list_first_entry(&d40c->free,
-					struct d40_desc,
-					node);
-		list_del(&desc->node);
-		d40c->free_len--;
+		d = kmem_cache_alloc(d40c->base->desc_slab, GFP_NOWAIT);
+		if (d != NULL) {
+			memset(d, 0, sizeof(struct d40_desc));
+			INIT_LIST_HEAD(&d->node);
+		}
 	}
-out:
-	return desc;
+	return d;
 }
 
 static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
 {
-	if (d40c->free_len < D40_DESC_CACHE_SIZE) {
-		list_add_tail(&d40d->node, &d40c->free);
-		d40c->free_len++;
-	} else
-		kfree(d40d);
+	kmem_cache_free(d40c->base->desc_slab, d40d);
 }
 
 static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
@@ -456,37 +445,41 @@ static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
 
 /* Support functions for logical channels */
 
-static int d40_lcla_id_get(struct d40_chan *d40c,
-			   struct d40_lcla_pool *pool)
+static int d40_lcla_id_get(struct d40_chan *d40c)
 {
 	int src_id = 0;
 	int dst_id = 0;
 	struct d40_log_lli *lcla_lidx_base =
-		pool->base + d40c->phy_chan->num * 1024;
+		d40c->base->lcla_pool.base + d40c->phy_chan->num * 1024;
 	int i;
 	int lli_per_log = d40c->base->plat_data->llis_per_log;
+	unsigned long flags;
 
 	if (d40c->lcla.src_id >= 0 && d40c->lcla.dst_id >= 0)
 		return 0;
 
-	if (pool->num_blocks > 32)
+	if (d40c->base->lcla_pool.num_blocks > 32)
 		return -EINVAL;
 
-	spin_lock(&pool->lock);
+	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
 
-	for (i = 0; i < pool->num_blocks; i++) {
-		if (!(pool->alloc_map[d40c->phy_chan->num] & (0x1 << i))) {
-			pool->alloc_map[d40c->phy_chan->num] |= (0x1 << i);
+	for (i = 0; i < d40c->base->lcla_pool.num_blocks; i++) {
+		if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &
+		      (0x1 << i))) {
+			d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |=
+				(0x1 << i);
 			break;
 		}
 	}
 	src_id = i;
-	if (src_id >= pool->num_blocks)
+	if (src_id >= d40c->base->lcla_pool.num_blocks)
 		goto err;
 
-	for (; i < pool->num_blocks; i++) {
-		if (!(pool->alloc_map[d40c->phy_chan->num] & (0x1 << i))) {
-			pool->alloc_map[d40c->phy_chan->num] |= (0x1 << i);
+	for (; i < d40c->base->lcla_pool.num_blocks; i++) {
+		if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &
+		      (0x1 << i))) {
+			d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |=
+				(0x1 << i);
 			break;
 		}
 	}
@@ -500,28 +493,13 @@ static int d40_lcla_id_get(struct d40_chan *d40c,
 	d40c->lcla.dst = lcla_lidx_base + dst_id * lli_per_log + 1;
 	d40c->lcla.src = lcla_lidx_base + src_id * lli_per_log + 1;
 
-
-	spin_unlock(&pool->lock);
+	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
 	return 0;
 err:
-	spin_unlock(&pool->lock);
+	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
 	return -EINVAL;
 }
 
-static void d40_lcla_id_put(struct d40_chan *d40c,
-			    struct d40_lcla_pool *pool,
-			    int id)
-{
-	if (id < 0)
-		return;
-
-	d40c->lcla.src_id = -1;
-	d40c->lcla.dst_id = -1;
-
-	spin_lock(&pool->lock);
-	pool->alloc_map[d40c->phy_chan->num] &= (~(0x1 << id));
-	spin_unlock(&pool->lock);
-}
 
 static int d40_channel_execute_command(struct d40_chan *d40c,
 				       enum d40_command command)
@@ -530,6 +508,7 @@ static int d40_channel_execute_command(struct d40_chan *d40c,
 	void __iomem *active_reg;
 	int ret = 0;
 	unsigned long flags;
+	u32 wmask;
 
 	spin_lock_irqsave(&d40c->base->execmd_lock, flags);
 
@@ -547,7 +526,9 @@ static int d40_channel_execute_command(struct d40_chan *d40c,
 			goto done;
 	}
 
-	writel(command << D40_CHAN_POS(d40c->phy_chan->num), active_reg);
+	wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
+	writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
+	       active_reg);
 
 	if (command == D40_DMA_SUSPEND_REQ) {
 
@@ -586,8 +567,7 @@ done:
 static void d40_term_all(struct d40_chan *d40c)
 {
 	struct d40_desc *d40d;
-	struct d40_desc *d;
-	struct d40_desc *_d;
+	unsigned long flags;
 
 	/* Release active descriptors */
 	while ((d40d = d40_first_active_get(d40c))) {
@@ -605,19 +585,17 @@ static void d40_term_all(struct d40_chan *d40c)
 		d40_desc_free(d40c, d40d);
 	}
 
-	/* Release client owned descriptors */
-	if (!list_empty(&d40c->client))
-		list_for_each_entry_safe(d, _d, &d40c->client, node) {
-			d40_pool_lli_free(d);
-			d40_desc_remove(d);
-			/* Return desc to free-list */
-			d40_desc_free(d40c, d40d);
-		}
+	spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
+
+	d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &=
+		(~(0x1 << d40c->lcla.dst_id));
+	d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &=
+		(~(0x1 << d40c->lcla.src_id));
+
+	d40c->lcla.src_id = -1;
+	d40c->lcla.dst_id = -1;
 
-	d40_lcla_id_put(d40c, &d40c->base->lcla_pool,
-			d40c->lcla.src_id);
-	d40_lcla_id_put(d40c, &d40c->base->lcla_pool,
-			d40c->lcla.dst_id);
+	spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
 
 	d40c->pending_tx = 0;
 	d40c->busy = false;
@@ -628,6 +606,7 @@ static void d40_config_set_event(struct d40_chan *d40c, bool do_enable)
 	u32 val;
 	unsigned long flags;
 
+	/* Notice, that disable requires the physical channel to be stopped */
 	if (do_enable)
 		val = D40_ACTIVATE_EVENTLINE;
 	else
@@ -732,31 +711,34 @@ static int d40_config_write(struct d40_chan *d40c)
 
 static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
 {
-
 	if (d40d->lli_phy.dst && d40d->lli_phy.src) {
 		d40_phy_lli_write(d40c->base->virtbase,
 				  d40c->phy_chan->num,
 				  d40d->lli_phy.dst,
 				  d40d->lli_phy.src);
-		d40d->lli_tcount = d40d->lli_len;
 	} else if (d40d->lli_log.dst && d40d->lli_log.src) {
-		u32 lli_len;
 		struct d40_log_lli *src = d40d->lli_log.src;
 		struct d40_log_lli *dst = d40d->lli_log.dst;
-
-		src += d40d->lli_tcount;
-		dst += d40d->lli_tcount;
-
-		if (d40d->lli_len <= d40c->base->plat_data->llis_per_log)
-			lli_len = d40d->lli_len;
-		else
-			lli_len = d40c->base->plat_data->llis_per_log;
-		d40d->lli_tcount += lli_len;
-		d40_log_lli_write(d40c->lcpa, d40c->lcla.src,
-				  d40c->lcla.dst,
-				  dst, src,
-				  d40c->base->plat_data->llis_per_log);
+		int s;
+
+		src += d40d->lli_count;
+		dst += d40d->lli_count;
+		s = d40_log_lli_write(d40c->lcpa,
+				      d40c->lcla.src, d40c->lcla.dst,
+				      dst, src,
+				      d40c->base->plat_data->llis_per_log);
+
+		/* If s equals to zero, the job is not linked */
+		if (s > 0) {
+			(void) dma_map_single(d40c->base->dev, d40c->lcla.src,
+					      s * sizeof(struct d40_log_lli),
+					      DMA_TO_DEVICE);
+			(void) dma_map_single(d40c->base->dev, d40c->lcla.dst,
+					      s * sizeof(struct d40_log_lli),
+					      DMA_TO_DEVICE);
+		}
 	}
+	d40d->lli_count += d40d->lli_tx_len;
 }
 
 static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
@@ -780,18 +762,21 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
 
 static int d40_start(struct d40_chan *d40c)
 {
-	int err;
+	if (d40c->base->rev == 0) {
+		int err;
 
-	if (d40c->log_num != D40_PHY_CHAN) {
-		err = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
-		if (err)
-			return err;
-		d40_config_set_event(d40c, true);
+		if (d40c->log_num != D40_PHY_CHAN) {
+			err = d40_channel_execute_command(d40c,
+							  D40_DMA_SUSPEND_REQ);
+			if (err)
+				return err;
+		}
 	}
 
-	err = d40_channel_execute_command(d40c, D40_DMA_RUN);
+	if (d40c->log_num != D40_PHY_CHAN)
+		d40_config_set_event(d40c, true);
 
-	return err;
+	return d40_channel_execute_command(d40c, D40_DMA_RUN);
 }
 
 static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
@@ -838,7 +823,7 @@ static void dma_tc_handle(struct d40_chan *d40c)
 	if (d40d == NULL)
 		return;
 
-	if (d40d->lli_tcount < d40d->lli_len) {
+	if (d40d->lli_count < d40d->lli_len) {
 
 		d40_desc_load(d40c, d40d);
 		/* Start dma job */
@@ -891,7 +876,6 @@ static void dma_tasklet(unsigned long data)
 		/* Return desc to free-list */
 		d40_desc_free(d40c, d40d_fin);
 	} else {
-		d40_desc_reset(d40d_fin);
 		if (!d40d_fin->is_in_client_list) {
 			d40_desc_remove(d40d_fin);
 			list_add_tail(&d40d_fin->node, &d40c->client);
@@ -975,7 +959,8 @@ static irqreturn_t d40_handle_interrupt(int irq, void *data)
 		if (!il[row].is_error)
 			dma_tc_handle(d40c);
 		else
-			dev_err(base->dev, "[%s] IRQ chan: %ld offset %d idx %d\n",
+			dev_err(base->dev,
+				"[%s] IRQ chan: %ld offset %d idx %d\n",
 				__func__, chan, il[row].offset, idx);
 
 		spin_unlock(&d40c->lock);
@@ -1134,7 +1119,8 @@ static int d40_allocate_channel(struct d40_chan *d40c)
 	int j;
 	int log_num;
 	bool is_src;
-	bool is_log = (d40c->dma_cfg.channel_type & STEDMA40_CHANNEL_IN_OPER_MODE)
+	bool is_log = (d40c->dma_cfg.channel_type &
+		       STEDMA40_CHANNEL_IN_OPER_MODE)
 		== STEDMA40_CHANNEL_IN_LOG_MODE;
 
 
@@ -1169,8 +1155,10 @@ static int d40_allocate_channel(struct d40_chan *d40c)
 			for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
 				int phy_num = j  + event_group * 2;
 				for (i = phy_num; i < phy_num + 2; i++) {
-					if (d40_alloc_mask_set(&phys[i], is_src,
-							       0, is_log))
+					if (d40_alloc_mask_set(&phys[i],
+							       is_src,
+							       0,
+							       is_log))
 						goto found_phy;
 				}
 			}
@@ -1221,30 +1209,6 @@ out:
 
 }
 
-static int d40_config_chan(struct d40_chan *d40c,
-			   struct stedma40_chan_cfg *info)
-{
-
-	/* Fill in basic CFG register values */
-	d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
-		    &d40c->dst_def_cfg, d40c->log_num != D40_PHY_CHAN);
-
-	if (d40c->log_num != D40_PHY_CHAN) {
-		d40_log_cfg(&d40c->dma_cfg,
-			    &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
-
-		if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
-			d40c->lcpa = d40c->base->lcpa_base +
-				d40c->dma_cfg.src_dev_type * 32;
-		else
-			d40c->lcpa = d40c->base->lcpa_base +
-				d40c->dma_cfg.dst_dev_type * 32 + 16;
-	}
-
-	/* Write channel configuration to the DMA */
-	return d40_config_write(d40c);
-}
-
 static int d40_config_memcpy(struct d40_chan *d40c)
 {
 	dma_cap_mask_t cap = d40c->chan.device->cap_mask;
@@ -1272,13 +1236,25 @@ static int d40_free_dma(struct d40_chan *d40c)
 {
 
 	int res = 0;
-	u32 event, dir;
+	u32 event;
 	struct d40_phy_res *phy = d40c->phy_chan;
 	bool is_src;
+	struct d40_desc *d;
+	struct d40_desc *_d;
+
 
 	/* Terminate all queued and active transfers */
 	d40_term_all(d40c);
 
+	/* Release client owned descriptors */
+	if (!list_empty(&d40c->client))
+		list_for_each_entry_safe(d, _d, &d40c->client, node) {
+			d40_pool_lli_free(d);
+			d40_desc_remove(d);
+			/* Return desc to free-list */
+			d40_desc_free(d40c, d);
+		}
+
 	if (phy == NULL) {
 		dev_err(&d40c->chan.dev->device, "[%s] phy == null\n",
 			__func__);
@@ -1292,22 +1268,12 @@ static int d40_free_dma(struct d40_chan *d40c)
 		return -EINVAL;
 	}
 
-
-	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
-	if (res) {
-		dev_err(&d40c->chan.dev->device, "[%s] suspend\n",
-			__func__);
-		return res;
-	}
-
 	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
 	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
 		event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
-		dir = D40_CHAN_REG_SDLNK;
 		is_src = false;
 	} else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
 		event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
-		dir = D40_CHAN_REG_SSLNK;
 		is_src = true;
 	} else {
 		dev_err(&d40c->chan.dev->device,
@@ -1315,16 +1281,17 @@ static int d40_free_dma(struct d40_chan *d40c)
 		return -EINVAL;
 	}
 
+	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
+	if (res) {
+		dev_err(&d40c->chan.dev->device, "[%s] suspend failed\n",
+			__func__);
+		return res;
+	}
+
 	if (d40c->log_num != D40_PHY_CHAN) {
-		/*
-		 * Release logical channel, deactivate the event line during
-		 * the time physical res is suspended.
-		 */
-		writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) &
-		       D40_EVENTLINE_MASK(event),
-		       d40c->base->virtbase + D40_DREG_PCBASE +
-		       phy->num * D40_DREG_PCDELTA + dir);
+		/* Release logical channel, deactivate the event line */
 
+		d40_config_set_event(d40c, false);
 		d40c->base->lookup_log_chans[d40c->log_num] = NULL;
 
 		/*
@@ -1345,8 +1312,9 @@ static int d40_free_dma(struct d40_chan *d40c)
 			}
 			return 0;
 		}
-	} else
-		d40_alloc_mask_free(phy, is_src, 0);
+	} else {
+		(void) d40_alloc_mask_free(phy, is_src, 0);
+	}
 
 	/* Release physical channel */
 	res = d40_channel_execute_command(d40c, D40_DMA_STOP);
@@ -1361,8 +1329,6 @@ static int d40_free_dma(struct d40_chan *d40c)
 	d40c->base->lookup_phy_chans[phy->num] = NULL;
 
 	return 0;
-
-
 }
 
 static int d40_pause(struct dma_chan *chan)
@@ -1370,7 +1336,6 @@ static int d40_pause(struct dma_chan *chan)
 	struct d40_chan *d40c =
 		container_of(chan, struct d40_chan, chan);
 	int res;
-
 	unsigned long flags;
 
 	spin_lock_irqsave(&d40c->lock, flags);
@@ -1397,7 +1362,6 @@ static bool d40_is_paused(struct d40_chan *d40c)
 	void __iomem *active_reg;
 	u32 status;
 	u32 event;
-	int res;
 
 	spin_lock_irqsave(&d40c->lock, flags);
 
@@ -1416,10 +1380,6 @@ static bool d40_is_paused(struct d40_chan *d40c)
 		goto _exit;
 	}
 
-	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
-	if (res != 0)
-		goto _exit;
-
 	if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
 	    d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
 		event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
@@ -1436,12 +1396,6 @@ static bool d40_is_paused(struct d40_chan *d40c)
 
 	if (status != D40_DMA_RUN)
 		is_paused = true;
-
-	/* Resume the other logical channels if any */
-	if (d40_chan_has_events(d40c))
-		res = d40_channel_execute_command(d40c,
-						  D40_DMA_RUN);
-
 _exit:
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return is_paused;
@@ -1468,13 +1422,14 @@ static u32 d40_residue(struct d40_chan *d40c)
 	u32 num_elt;
 
 	if (d40c->log_num != D40_PHY_CHAN)
-		num_elt = (readl(&d40c->lcpa->lcsp2) &  D40_MEM_LCSP2_ECNT_MASK)
+		num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
 			>> D40_MEM_LCSP2_ECNT_POS;
 	else
 		num_elt = (readl(d40c->base->virtbase + D40_DREG_PCBASE +
 				 d40c->phy_chan->num * D40_DREG_PCDELTA +
 				 D40_CHAN_REG_SDELT) &
-			   D40_SREG_ELEM_PHY_ECNT_MASK) >> D40_SREG_ELEM_PHY_ECNT_POS;
+			   D40_SREG_ELEM_PHY_ECNT_MASK) >>
+			D40_SREG_ELEM_PHY_ECNT_POS;
 	return num_elt * (1 << d40c->dma_cfg.dst_info.data_width);
 }
 
@@ -1487,20 +1442,21 @@ static int d40_resume(struct dma_chan *chan)
 
 	spin_lock_irqsave(&d40c->lock, flags);
 
-	if (d40c->log_num != D40_PHY_CHAN) {
-		res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
-		if (res)
-			goto out;
+	if (d40c->base->rev == 0)
+		if (d40c->log_num != D40_PHY_CHAN) {
+			res = d40_channel_execute_command(d40c,
+							  D40_DMA_SUSPEND_REQ);
+			goto no_suspend;
+		}
 
-		/* If bytes left to transfer or linked tx resume job */
-		if (d40_residue(d40c) || d40_tx_is_linked(d40c)) {
+	/* If bytes left to transfer or linked tx resume job */
+	if (d40_residue(d40c) || d40_tx_is_linked(d40c)) {
+		if (d40c->log_num != D40_PHY_CHAN)
 			d40_config_set_event(d40c, true);
-			res = d40_channel_execute_command(d40c, D40_DMA_RUN);
-		}
-	} else if (d40_residue(d40c) || d40_tx_is_linked(d40c))
 		res = d40_channel_execute_command(d40c, D40_DMA_RUN);
+	}
 
-out:
+no_suspend:
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return res;
 }
@@ -1534,8 +1490,10 @@ int stedma40_set_psize(struct dma_chan *chan,
 	if (d40c->log_num != D40_PHY_CHAN) {
 		d40c->log_def.lcsp1 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK;
 		d40c->log_def.lcsp3 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK;
-		d40c->log_def.lcsp1 |= src_psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
-		d40c->log_def.lcsp3 |= dst_psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
+		d40c->log_def.lcsp1 |= src_psize <<
+			D40_MEM_LCSP1_SCFG_PSIZE_POS;
+		d40c->log_def.lcsp3 |= dst_psize <<
+			D40_MEM_LCSP1_SCFG_PSIZE_POS;
 		goto out;
 	}
 
@@ -1566,37 +1524,42 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
 						   struct scatterlist *sgl_dst,
 						   struct scatterlist *sgl_src,
 						   unsigned int sgl_len,
-						   unsigned long flags)
+						   unsigned long dma_flags)
 {
 	int res;
 	struct d40_desc *d40d;
 	struct d40_chan *d40c = container_of(chan, struct d40_chan,
 					     chan);
-	unsigned long flg;
-	int lli_max = d40c->base->plat_data->llis_per_log;
+	unsigned long flags;
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Unallocated channel.\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
 
-	spin_lock_irqsave(&d40c->lock, flg);
+	spin_lock_irqsave(&d40c->lock, flags);
 	d40d = d40_desc_get(d40c);
 
 	if (d40d == NULL)
 		goto err;
 
-	memset(d40d, 0, sizeof(struct d40_desc));
 	d40d->lli_len = sgl_len;
-
-	d40d->txd.flags = flags;
+	d40d->lli_tx_len = d40d->lli_len;
+	d40d->txd.flags = dma_flags;
 
 	if (d40c->log_num != D40_PHY_CHAN) {
+		if (d40d->lli_len > d40c->base->plat_data->llis_per_log)
+			d40d->lli_tx_len = d40c->base->plat_data->llis_per_log;
+
 		if (sgl_len > 1)
 			/*
 			 * Check if there is space available in lcla. If not,
 			 * split list into 1-length and run only in lcpa
 			 * space.
 			 */
-			if (d40_lcla_id_get(d40c,
-					    &d40c->base->lcla_pool) != 0)
-				lli_max = 1;
+			if (d40_lcla_id_get(d40c) != 0)
+				d40d->lli_tx_len = 1;
 
 		if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) {
 			dev_err(&d40c->chan.dev->device,
@@ -1610,7 +1573,8 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
 					 d40d->lli_log.src,
 					 d40c->log_def.lcsp1,
 					 d40c->dma_cfg.src_info.data_width,
-					 flags & DMA_PREP_INTERRUPT, lli_max,
+					 dma_flags & DMA_PREP_INTERRUPT,
+					 d40d->lli_tx_len,
 					 d40c->base->plat_data->llis_per_log);
 
 		(void) d40_log_sg_to_lli(d40c->lcla.dst_id,
@@ -1619,7 +1583,8 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
 					 d40d->lli_log.dst,
 					 d40c->log_def.lcsp3,
 					 d40c->dma_cfg.dst_info.data_width,
-					 flags & DMA_PREP_INTERRUPT, lli_max,
+					 dma_flags & DMA_PREP_INTERRUPT,
+					 d40d->lli_tx_len,
 					 d40c->base->plat_data->llis_per_log);
 
 
@@ -1664,11 +1629,11 @@ struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
 
 	d40d->txd.tx_submit = d40_tx_submit;
 
-	spin_unlock_irqrestore(&d40c->lock, flg);
+	spin_unlock_irqrestore(&d40c->lock, flags);
 
 	return &d40d->txd;
 err:
-	spin_unlock_irqrestore(&d40c->lock, flg);
+	spin_unlock_irqrestore(&d40c->lock, flags);
 	return NULL;
 }
 EXPORT_SYMBOL(stedma40_memcpy_sg);
@@ -1698,46 +1663,66 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
 	unsigned long flags;
 	struct d40_chan *d40c =
 		container_of(chan, struct d40_chan, chan);
-
+	bool is_free_phy;
 	spin_lock_irqsave(&d40c->lock, flags);
 
 	d40c->completed = chan->cookie = 1;
 
 	/*
 	 * If no dma configuration is set (channel_type == 0)
-	 * use default configuration
+	 * use default configuration (memcpy)
 	 */
 	if (d40c->dma_cfg.channel_type == 0) {
 		err = d40_config_memcpy(d40c);
-		if (err)
-			goto err_alloc;
+		if (err) {
+			dev_err(&d40c->chan.dev->device,
+				"[%s] Failed to configure memcpy channel\n",
+				__func__);
+			goto fail;
+		}
 	}
+	is_free_phy = (d40c->phy_chan == NULL);
 
 	err = d40_allocate_channel(d40c);
 	if (err) {
 		dev_err(&d40c->chan.dev->device,
 			"[%s] Failed to allocate channel\n", __func__);
-		goto err_alloc;
+		goto fail;
 	}
 
-	err = d40_config_chan(d40c, &d40c->dma_cfg);
-	if (err) {
-		dev_err(&d40c->chan.dev->device,
-			"[%s] Failed to configure channel\n",
-			__func__);
-		goto err_config;
-	}
+	/* Fill in basic CFG register values */
+	d40_phy_cfg(&d40c->dma_cfg, &d40c->src_def_cfg,
+		    &d40c->dst_def_cfg, d40c->log_num != D40_PHY_CHAN);
 
-	spin_unlock_irqrestore(&d40c->lock, flags);
-	return 0;
+	if (d40c->log_num != D40_PHY_CHAN) {
+		d40_log_cfg(&d40c->dma_cfg,
+			    &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
 
- err_config:
-	(void) d40_free_dma(d40c);
- err_alloc:
+		if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
+			d40c->lcpa = d40c->base->lcpa_base +
+			  d40c->dma_cfg.src_dev_type * D40_LCPA_CHAN_SIZE;
+		else
+			d40c->lcpa = d40c->base->lcpa_base +
+			  d40c->dma_cfg.dst_dev_type *
+			  D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
+	}
+
+	/*
+	 * Only write channel configuration to the DMA if the physical
+	 * resource is free. In case of multiple logical channels
+	 * on the same physical resource, only the first write is necessary.
+	 */
+	if (is_free_phy) {
+		err = d40_config_write(d40c);
+		if (err) {
+			dev_err(&d40c->chan.dev->device,
+				"[%s] Failed to configure channel\n",
+				__func__);
+		}
+	}
+fail:
 	spin_unlock_irqrestore(&d40c->lock, flags);
-	dev_err(&d40c->chan.dev->device,
-		"[%s] Channel allocation failed\n", __func__);
-	return -EINVAL;
+	return err;
 }
 
 static void d40_free_chan_resources(struct dma_chan *chan)
@@ -1747,6 +1732,13 @@ static void d40_free_chan_resources(struct dma_chan *chan)
 	int err;
 	unsigned long flags;
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Cannot free unallocated channel\n", __func__);
+		return;
+	}
+
+
 	spin_lock_irqsave(&d40c->lock, flags);
 
 	err = d40_free_dma(d40c);
@@ -1761,15 +1753,21 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
 						       dma_addr_t dst,
 						       dma_addr_t src,
 						       size_t size,
-						       unsigned long flags)
+						       unsigned long dma_flags)
 {
 	struct d40_desc *d40d;
 	struct d40_chan *d40c = container_of(chan, struct d40_chan,
 					     chan);
-	unsigned long flg;
+	unsigned long flags;
 	int err = 0;
 
-	spin_lock_irqsave(&d40c->lock, flg);
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Channel is not allocated.\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	spin_lock_irqsave(&d40c->lock, flags);
 	d40d = d40_desc_get(d40c);
 
 	if (d40d == NULL) {
@@ -1778,9 +1776,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
 		goto err;
 	}
 
-	memset(d40d, 0, sizeof(struct d40_desc));
-
-	d40d->txd.flags = flags;
+	d40d->txd.flags = dma_flags;
 
 	dma_async_tx_descriptor_init(&d40d->txd, chan);
 
@@ -1794,6 +1790,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
 			goto err;
 		}
 		d40d->lli_len = 1;
+		d40d->lli_tx_len = 1;
 
 		d40_log_fill_lli(d40d->lli_log.src,
 				 src,
@@ -1801,7 +1798,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
 				 0,
 				 d40c->log_def.lcsp1,
 				 d40c->dma_cfg.src_info.data_width,
-				 true, true);
+				 false, true);
 
 		d40_log_fill_lli(d40d->lli_log.dst,
 				 dst,
@@ -1848,7 +1845,7 @@ static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
 				      d40d->lli_pool.size, DMA_TO_DEVICE);
 	}
 
-	spin_unlock_irqrestore(&d40c->lock, flg);
+	spin_unlock_irqrestore(&d40c->lock, flags);
 	return &d40d->txd;
 
 err_fill_lli:
@@ -1856,7 +1853,7 @@ err_fill_lli:
 		"[%s] Failed filling in PHY LLI\n", __func__);
 	d40_pool_lli_free(d40d);
 err:
-	spin_unlock_irqrestore(&d40c->lock, flg);
+	spin_unlock_irqrestore(&d40c->lock, flags);
 	return NULL;
 }
 
@@ -1865,11 +1862,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
 				 struct scatterlist *sgl,
 				 unsigned int sg_len,
 				 enum dma_data_direction direction,
-				 unsigned long flags)
+				 unsigned long dma_flags)
 {
 	dma_addr_t dev_addr = 0;
 	int total_size;
-	int lli_max = d40c->base->plat_data->llis_per_log;
 
 	if (d40_pool_lli_alloc(d40d, sg_len, true) < 0) {
 		dev_err(&d40c->chan.dev->device,
@@ -1878,7 +1874,10 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
 	}
 
 	d40d->lli_len = sg_len;
-	d40d->lli_tcount = 0;
+	if (d40d->lli_len <= d40c->base->plat_data->llis_per_log)
+		d40d->lli_tx_len = d40d->lli_len;
+	else
+		d40d->lli_tx_len = d40c->base->plat_data->llis_per_log;
 
 	if (sg_len > 1)
 		/*
@@ -1886,35 +1885,34 @@ static int d40_prep_slave_sg_log(struct d40_desc *d40d,
 		 * If not, split list into 1-length and run only
 		 * in lcpa space.
 		 */
-		if (d40_lcla_id_get(d40c, &d40c->base->lcla_pool) != 0)
-			lli_max = 1;
+		if (d40_lcla_id_get(d40c) != 0)
+			d40d->lli_tx_len = 1;
 
-	if (direction == DMA_FROM_DEVICE) {
-		dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
-		total_size = d40_log_sg_to_dev(&d40c->lcla,
-					       sgl, sg_len,
-					       &d40d->lli_log,
-					       &d40c->log_def,
-					       d40c->dma_cfg.src_info.data_width,
-					       d40c->dma_cfg.dst_info.data_width,
-					       direction,
-					       flags & DMA_PREP_INTERRUPT,
-					       dev_addr, lli_max,
-					       d40c->base->plat_data->llis_per_log);
-	} else if (direction == DMA_TO_DEVICE) {
-		dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
-		total_size = d40_log_sg_to_dev(&d40c->lcla,
-					       sgl, sg_len,
-					       &d40d->lli_log,
-					       &d40c->log_def,
-					       d40c->dma_cfg.src_info.data_width,
-					       d40c->dma_cfg.dst_info.data_width,
-					       direction,
-					       flags & DMA_PREP_INTERRUPT,
-					       dev_addr, lli_max,
-					       d40c->base->plat_data->llis_per_log);
-	} else
+	if (direction == DMA_FROM_DEVICE)
+		if (d40c->runtime_addr)
+			dev_addr = d40c->runtime_addr;
+		else
+			dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+	else if (direction == DMA_TO_DEVICE)
+		if (d40c->runtime_addr)
+			dev_addr = d40c->runtime_addr;
+		else
+			dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+
+	else
 		return -EINVAL;
+
+	total_size = d40_log_sg_to_dev(&d40c->lcla,
+				       sgl, sg_len,
+				       &d40d->lli_log,
+				       &d40c->log_def,
+				       d40c->dma_cfg.src_info.data_width,
+				       d40c->dma_cfg.dst_info.data_width,
+				       direction,
+				       dma_flags & DMA_PREP_INTERRUPT,
+				       dev_addr, d40d->lli_tx_len,
+				       d40c->base->plat_data->llis_per_log);
+
 	if (total_size < 0)
 		return -EINVAL;
 
@@ -1926,7 +1924,7 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d,
 				 struct scatterlist *sgl,
 				 unsigned int sgl_len,
 				 enum dma_data_direction direction,
-				 unsigned long flags)
+				 unsigned long dma_flags)
 {
 	dma_addr_t src_dev_addr;
 	dma_addr_t dst_dev_addr;
@@ -1939,13 +1937,19 @@ static int d40_prep_slave_sg_phy(struct d40_desc *d40d,
 	}
 
 	d40d->lli_len = sgl_len;
-	d40d->lli_tcount = 0;
+	d40d->lli_tx_len = sgl_len;
 
 	if (direction == DMA_FROM_DEVICE) {
 		dst_dev_addr = 0;
-		src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
+		if (d40c->runtime_addr)
+			src_dev_addr = d40c->runtime_addr;
+		else
+			src_dev_addr = d40c->base->plat_data->dev_rx[d40c->dma_cfg.src_dev_type];
 	} else if (direction == DMA_TO_DEVICE) {
-		dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
+		if (d40c->runtime_addr)
+			dst_dev_addr = d40c->runtime_addr;
+		else
+			dst_dev_addr = d40c->base->plat_data->dev_tx[d40c->dma_cfg.dst_dev_type];
 		src_dev_addr = 0;
 	} else
 		return -EINVAL;
@@ -1983,34 +1987,38 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan,
 							 struct scatterlist *sgl,
 							 unsigned int sg_len,
 							 enum dma_data_direction direction,
-							 unsigned long flags)
+							 unsigned long dma_flags)
 {
 	struct d40_desc *d40d;
 	struct d40_chan *d40c = container_of(chan, struct d40_chan,
 					     chan);
-	unsigned long flg;
+	unsigned long flags;
 	int err;
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Cannot prepare unallocated channel\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
 	if (d40c->dma_cfg.pre_transfer)
 		d40c->dma_cfg.pre_transfer(chan,
 					   d40c->dma_cfg.pre_transfer_data,
 					   sg_dma_len(sgl));
 
-	spin_lock_irqsave(&d40c->lock, flg);
+	spin_lock_irqsave(&d40c->lock, flags);
 	d40d = d40_desc_get(d40c);
-	spin_unlock_irqrestore(&d40c->lock, flg);
+	spin_unlock_irqrestore(&d40c->lock, flags);
 
 	if (d40d == NULL)
 		return NULL;
 
-	memset(d40d, 0, sizeof(struct d40_desc));
-
 	if (d40c->log_num != D40_PHY_CHAN)
 		err = d40_prep_slave_sg_log(d40d, d40c, sgl, sg_len,
-					    direction, flags);
+					    direction, dma_flags);
 	else
 		err = d40_prep_slave_sg_phy(d40d, d40c, sgl, sg_len,
-					    direction, flags);
+					    direction, dma_flags);
 	if (err) {
 		dev_err(&d40c->chan.dev->device,
 			"[%s] Failed to prepare %s slave sg job: %d\n",
@@ -2019,7 +2027,7 @@ static struct dma_async_tx_descriptor *d40_prep_slave_sg(struct dma_chan *chan,
 		return NULL;
 	}
 
-	d40d->txd.flags = flags;
+	d40d->txd.flags = dma_flags;
 
 	dma_async_tx_descriptor_init(&d40d->txd, chan);
 
@@ -2037,6 +2045,13 @@ static enum dma_status d40_tx_status(struct dma_chan *chan,
 	dma_cookie_t last_complete;
 	int ret;
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Cannot read status of unallocated channel\n",
+			__func__);
+		return -EINVAL;
+	}
+
 	last_complete = d40c->completed;
 	last_used = chan->cookie;
 
@@ -2056,6 +2071,12 @@ static void d40_issue_pending(struct dma_chan *chan)
 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
 	unsigned long flags;
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Channel is not allocated!\n", __func__);
+		return;
+	}
+
 	spin_lock_irqsave(&d40c->lock, flags);
 
 	/* Busy means that pending jobs are already being processed */
@@ -2065,12 +2086,129 @@ static void d40_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&d40c->lock, flags);
 }
 
+/* Runtime reconfiguration extension */
+static void d40_set_runtime_config(struct dma_chan *chan,
+			       struct dma_slave_config *config)
+{
+	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
+	struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
+	enum dma_slave_buswidth config_addr_width;
+	dma_addr_t config_addr;
+	u32 config_maxburst;
+	enum stedma40_periph_data_width addr_width;
+	int psize;
+
+	if (config->direction == DMA_FROM_DEVICE) {
+		dma_addr_t dev_addr_rx =
+			d40c->base->plat_data->dev_rx[cfg->src_dev_type];
+
+		config_addr = config->src_addr;
+		if (dev_addr_rx)
+			dev_dbg(d40c->base->dev,
+				"channel has a pre-wired RX address %08x "
+				"overriding with %08x\n",
+				dev_addr_rx, config_addr);
+		if (cfg->dir != STEDMA40_PERIPH_TO_MEM)
+			dev_dbg(d40c->base->dev,
+				"channel was not configured for peripheral "
+				"to memory transfer (%d) overriding\n",
+				cfg->dir);
+		cfg->dir = STEDMA40_PERIPH_TO_MEM;
+
+		config_addr_width = config->src_addr_width;
+		config_maxburst = config->src_maxburst;
+
+	} else if (config->direction == DMA_TO_DEVICE) {
+		dma_addr_t dev_addr_tx =
+			d40c->base->plat_data->dev_tx[cfg->dst_dev_type];
+
+		config_addr = config->dst_addr;
+		if (dev_addr_tx)
+			dev_dbg(d40c->base->dev,
+				"channel has a pre-wired TX address %08x "
+				"overriding with %08x\n",
+				dev_addr_tx, config_addr);
+		if (cfg->dir != STEDMA40_MEM_TO_PERIPH)
+			dev_dbg(d40c->base->dev,
+				"channel was not configured for memory "
+				"to peripheral transfer (%d) overriding\n",
+				cfg->dir);
+		cfg->dir = STEDMA40_MEM_TO_PERIPH;
+
+		config_addr_width = config->dst_addr_width;
+		config_maxburst = config->dst_maxburst;
+
+	} else {
+		dev_err(d40c->base->dev,
+			"unrecognized channel direction %d\n",
+			config->direction);
+		return;
+	}
+
+	switch (config_addr_width) {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		addr_width = STEDMA40_BYTE_WIDTH;
+		break;
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		addr_width = STEDMA40_HALFWORD_WIDTH;
+		break;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		addr_width = STEDMA40_WORD_WIDTH;
+		break;
+	case DMA_SLAVE_BUSWIDTH_8_BYTES:
+		addr_width = STEDMA40_DOUBLEWORD_WIDTH;
+		break;
+	default:
+		dev_err(d40c->base->dev,
+			"illegal peripheral address width "
+			"requested (%d)\n",
+			config->src_addr_width);
+		return;
+	}
+
+	if (config_maxburst >= 16)
+		psize = STEDMA40_PSIZE_LOG_16;
+	else if (config_maxburst >= 8)
+		psize = STEDMA40_PSIZE_LOG_8;
+	else if (config_maxburst >= 4)
+		psize = STEDMA40_PSIZE_LOG_4;
+	else
+		psize = STEDMA40_PSIZE_LOG_1;
+
+	/* Set up all the endpoint configs */
+	cfg->src_info.data_width = addr_width;
+	cfg->src_info.psize = psize;
+	cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
+	cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+	cfg->dst_info.data_width = addr_width;
+	cfg->dst_info.psize = psize;
+	cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
+	cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+
+	/* These settings will take precedence later */
+	d40c->runtime_addr = config_addr;
+	d40c->runtime_direction = config->direction;
+	dev_dbg(d40c->base->dev,
+		"configured channel %s for %s, data width %d, "
+		"maxburst %d bytes, LE, no flow control\n",
+		dma_chan_name(chan),
+		(config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+		config_addr_width,
+		config_maxburst);
+}
+
 static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		       unsigned long arg)
 {
 	unsigned long flags;
 	struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
 
+	if (d40c->phy_chan == NULL) {
+		dev_err(&d40c->chan.dev->device,
+			"[%s] Channel is not allocated!\n", __func__);
+		return -EINVAL;
+	}
+
 	switch (cmd) {
 	case DMA_TERMINATE_ALL:
 		spin_lock_irqsave(&d40c->lock, flags);
@@ -2081,6 +2219,12 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		return d40_pause(chan);
 	case DMA_RESUME:
 		return d40_resume(chan);
+	case DMA_SLAVE_CONFIG:
+		d40_set_runtime_config(chan,
+			(struct dma_slave_config *) arg);
+		return 0;
+	default:
+		break;
 	}
 
 	/* Other commands are unimplemented */
@@ -2111,13 +2255,10 @@ static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
 
 		d40c->log_num = D40_PHY_CHAN;
 
-		INIT_LIST_HEAD(&d40c->free);
 		INIT_LIST_HEAD(&d40c->active);
 		INIT_LIST_HEAD(&d40c->queue);
 		INIT_LIST_HEAD(&d40c->client);
 
-		d40c->free_len = 0;
-
 		tasklet_init(&d40c->tasklet, dma_tasklet,
 			     (unsigned long) d40c);
 
@@ -2243,6 +2384,14 @@ static int __init d40_phy_res_init(struct d40_base *base)
 		}
 		spin_lock_init(&base->phy_res[i].lock);
 	}
+
+	/* Mark disabled channels as occupied */
+	for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
+			base->phy_res[i].allocated_src = D40_ALLOC_PHY;
+			base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
+			num_phy_chans_avail--;
+	}
+
 	dev_info(base->dev, "%d of %d physical DMA channels available\n",
 		 num_phy_chans_avail, base->num_phy_chans);
 
@@ -2291,6 +2440,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
 	int num_log_chans = 0;
 	int num_phy_chans;
 	int i;
+	u32 val;
 
 	clk = clk_get(&pdev->dev, NULL);
 
@@ -2329,12 +2479,13 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
 		}
 	}
 
-	i = readl(virtbase + D40_DREG_PERIPHID2);
+	/* Get silicon revision */
+	val = readl(virtbase + D40_DREG_PERIPHID2);
 
-	if ((i & 0xf) != D40_PERIPHID2_DESIGNER) {
+	if ((val & 0xf) != D40_PERIPHID2_DESIGNER) {
 		dev_err(&pdev->dev,
 			"[%s] Unknown designer! Got %x wanted %x\n",
-			__func__, i & 0xf, D40_PERIPHID2_DESIGNER);
+			__func__, val & 0xf, D40_PERIPHID2_DESIGNER);
 		goto failure;
 	}
 
@@ -2342,7 +2493,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
 	num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
 
 	dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n",
-		 (i >> 4) & 0xf, res->start);
+		 (val >> 4) & 0xf, res->start);
 
 	plat_data = pdev->dev.platform_data;
 
@@ -2364,6 +2515,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
 		goto failure;
 	}
 
+	base->rev = (val >> 4) & 0xf;
 	base->clk = clk;
 	base->num_phy_chans = num_phy_chans;
 	base->num_log_chans = num_log_chans;
@@ -2402,6 +2554,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
 	if (!base->lcla_pool.alloc_map)
 		goto failure;
 
+	base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
+					    0, SLAB_HWCACHE_ALIGN,
+					    NULL);
+	if (base->desc_slab == NULL)
+		goto failure;
+
 	return base;
 
 failure:
@@ -2495,6 +2653,78 @@ static void __init d40_hw_init(struct d40_base *base)
 
 }
 
+static int __init d40_lcla_allocate(struct d40_base *base)
+{
+	unsigned long *page_list;
+	int i, j;
+	int ret = 0;
+
+	/*
+	 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
+	 * To full fill this hardware requirement without wasting 256 kb
+	 * we allocate pages until we get an aligned one.
+	 */
+	page_list = kmalloc(sizeof(unsigned long) * MAX_LCLA_ALLOC_ATTEMPTS,
+			    GFP_KERNEL);
+
+	if (!page_list) {
+		ret = -ENOMEM;
+		goto failure;
+	}
+
+	/* Calculating how many pages that are required */
+	base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
+
+	for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
+		page_list[i] = __get_free_pages(GFP_KERNEL,
+						base->lcla_pool.pages);
+		if (!page_list[i]) {
+
+			dev_err(base->dev,
+				"[%s] Failed to allocate %d pages.\n",
+				__func__, base->lcla_pool.pages);
+
+			for (j = 0; j < i; j++)
+				free_pages(page_list[j], base->lcla_pool.pages);
+			goto failure;
+		}
+
+		if ((virt_to_phys((void *)page_list[i]) &
+		     (LCLA_ALIGNMENT - 1)) == 0)
+			break;
+	}
+
+	for (j = 0; j < i; j++)
+		free_pages(page_list[j], base->lcla_pool.pages);
+
+	if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
+		base->lcla_pool.base = (void *)page_list[i];
+	} else {
+		/* After many attempts, no succees with finding the correct
+		 * alignment try with allocating a big buffer */
+		dev_warn(base->dev,
+			 "[%s] Failed to get %d pages @ 18 bit align.\n",
+			 __func__, base->lcla_pool.pages);
+		base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
+							 base->num_phy_chans +
+							 LCLA_ALIGNMENT,
+							 GFP_KERNEL);
+		if (!base->lcla_pool.base_unaligned) {
+			ret = -ENOMEM;
+			goto failure;
+		}
+
+		base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
+						 LCLA_ALIGNMENT);
+	}
+
+	writel(virt_to_phys(base->lcla_pool.base),
+	       base->virtbase + D40_DREG_LCLA);
+failure:
+	kfree(page_list);
+	return ret;
+}
+
 static int __init d40_probe(struct platform_device *pdev)
 {
 	int err;
@@ -2554,41 +2784,11 @@ static int __init d40_probe(struct platform_device *pdev)
 			__func__);
 		goto failure;
 	}
-	/* Get IO for logical channel link address */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcla");
-	if (!res) {
-		ret = -ENOENT;
-		dev_err(&pdev->dev,
-			"[%s] No \"lcla\" resource defined\n",
-			__func__);
-		goto failure;
-	}
 
-	base->lcla_pool.base_size = resource_size(res);
-	base->lcla_pool.phy = res->start;
-
-	if (request_mem_region(res->start, resource_size(res),
-			       D40_NAME " I/O lcla") == NULL) {
-		ret = -EBUSY;
-		dev_err(&pdev->dev,
-			"[%s] Failed to request LCLA region 0x%x-0x%x\n",
-			__func__, res->start, res->end);
-		goto failure;
-	}
-	val = readl(base->virtbase + D40_DREG_LCLA);
-	if (res->start != val && val != 0) {
-		dev_warn(&pdev->dev,
-			 "[%s] Mismatch LCLA dma 0x%x, def 0x%x\n",
-			 __func__, val, res->start);
-	} else
-		writel(res->start, base->virtbase + D40_DREG_LCLA);
-
-	base->lcla_pool.base = ioremap(res->start, resource_size(res));
-	if (!base->lcla_pool.base) {
-		ret = -ENOMEM;
-		dev_err(&pdev->dev,
-			"[%s] Failed to ioremap LCLA 0x%x-0x%x\n",
-			__func__, res->start, res->end);
+	ret = d40_lcla_allocate(base);
+	if (ret) {
+		dev_err(&pdev->dev, "[%s] Failed to allocate LCLA area\n",
+			__func__);
 		goto failure;
 	}
 
@@ -2616,11 +2816,15 @@ static int __init d40_probe(struct platform_device *pdev)
 
 failure:
 	if (base) {
+		if (base->desc_slab)
+			kmem_cache_destroy(base->desc_slab);
 		if (base->virtbase)
 			iounmap(base->virtbase);
-		if (base->lcla_pool.phy)
-			release_mem_region(base->lcla_pool.phy,
-					   base->lcla_pool.base_size);
+		if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
+			free_pages((unsigned long)base->lcla_pool.base,
+				   base->lcla_pool.pages);
+		if (base->lcla_pool.base_unaligned)
+			kfree(base->lcla_pool.base_unaligned);
 		if (base->phy_lcpa)
 			release_mem_region(base->phy_lcpa,
 					   base->lcpa_size);
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index 561fdd8a80c..d937f76d6e2 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -315,11 +315,8 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
 	int total_size = 0;
 	struct scatterlist *current_sg = sg;
 	int i;
-	u32 next_lli_off_dst;
-	u32 next_lli_off_src;
-
-	next_lli_off_src = 0;
-	next_lli_off_dst = 0;
+	u32 next_lli_off_dst = 0;
+	u32 next_lli_off_src = 0;
 
 	for_each_sg(sg, current_sg, sg_len, i) {
 		total_size += sg_dma_len(current_sg);
@@ -351,7 +348,7 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
 					 sg_dma_len(current_sg),
 					 next_lli_off_src,
 					 lcsp->lcsp1, src_data_width,
-					 term_int && !next_lli_off_src,
+					 false,
 					 true);
 			d40_log_fill_lli(&lli->dst[i],
 					 dev_addr,
@@ -375,7 +372,7 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
 					 sg_dma_len(current_sg),
 					 next_lli_off_src,
 					 lcsp->lcsp1, src_data_width,
-					 term_int && !next_lli_off_src,
+					 false,
 					 false);
 		}
 	}
@@ -423,32 +420,35 @@ int d40_log_sg_to_lli(int lcla_id,
 	return total_size;
 }
 
-void d40_log_lli_write(struct d40_log_lli_full *lcpa,
+int d40_log_lli_write(struct d40_log_lli_full *lcpa,
 		       struct d40_log_lli *lcla_src,
 		       struct d40_log_lli *lcla_dst,
 		       struct d40_log_lli *lli_dst,
 		       struct d40_log_lli *lli_src,
 		       int llis_per_log)
 {
-	u32 slos = 0;
-	u32 dlos = 0;
+	u32 slos;
+	u32 dlos;
 	int i;
 
-	lcpa->lcsp0 = lli_src->lcsp02;
-	lcpa->lcsp1 = lli_src->lcsp13;
-	lcpa->lcsp2 = lli_dst->lcsp02;
-	lcpa->lcsp3 = lli_dst->lcsp13;
+	writel(lli_src->lcsp02, &lcpa->lcsp0);
+	writel(lli_src->lcsp13, &lcpa->lcsp1);
+	writel(lli_dst->lcsp02, &lcpa->lcsp2);
+	writel(lli_dst->lcsp13, &lcpa->lcsp3);
 
 	slos = lli_src->lcsp13 & D40_MEM_LCSP1_SLOS_MASK;
 	dlos = lli_dst->lcsp13 & D40_MEM_LCSP3_DLOS_MASK;
 
 	for (i = 0; (i < llis_per_log) && slos && dlos; i++) {
-		writel(lli_src[i+1].lcsp02, &lcla_src[i].lcsp02);
-		writel(lli_src[i+1].lcsp13, &lcla_src[i].lcsp13);
-		writel(lli_dst[i+1].lcsp02, &lcla_dst[i].lcsp02);
-		writel(lli_dst[i+1].lcsp13, &lcla_dst[i].lcsp13);
+		writel(lli_src[i + 1].lcsp02, &lcla_src[i].lcsp02);
+		writel(lli_src[i + 1].lcsp13, &lcla_src[i].lcsp13);
+		writel(lli_dst[i + 1].lcsp02, &lcla_dst[i].lcsp02);
+		writel(lli_dst[i + 1].lcsp13, &lcla_dst[i].lcsp13);
 
-		slos = lli_src[i+1].lcsp13 & D40_MEM_LCSP1_SLOS_MASK;
-		dlos = lli_dst[i+1].lcsp13 & D40_MEM_LCSP3_DLOS_MASK;
+		slos = lli_src[i + 1].lcsp13 & D40_MEM_LCSP1_SLOS_MASK;
+		dlos = lli_dst[i + 1].lcsp13 & D40_MEM_LCSP3_DLOS_MASK;
 	}
+
+	return i;
+
 }
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index 2029280cb33..9c0fa2f5fe5 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -13,6 +13,9 @@
 #define D40_DREG_PCDELTA	(8 * 4)
 #define D40_LLI_ALIGN		16 /* LLI alignment must be 16 bytes. */
 
+#define D40_LCPA_CHAN_SIZE 32
+#define D40_LCPA_CHAN_DST_DELTA 16
+
 #define D40_TYPE_TO_GROUP(type) (type / 16)
 #define D40_TYPE_TO_EVENT(type) (type % 16)
 
@@ -336,12 +339,12 @@ int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
 		      bool term_int, dma_addr_t dev_addr, int max_len,
 		      int llis_per_log);
 
-void d40_log_lli_write(struct d40_log_lli_full *lcpa,
-		       struct d40_log_lli *lcla_src,
-		       struct d40_log_lli *lcla_dst,
-		       struct d40_log_lli *lli_dst,
-		       struct d40_log_lli *lli_src,
-		       int llis_per_log);
+int d40_log_lli_write(struct d40_log_lli_full *lcpa,
+		      struct d40_log_lli *lcla_src,
+		      struct d40_log_lli *lcla_dst,
+		      struct d40_log_lli *lli_dst,
+		      struct d40_log_lli *lli_src,
+		      int llis_per_log);
 
 int d40_log_sg_to_lli(int lcla_id,
 		      struct scatterlist *sg,
diff --git a/drivers/dma/timb_dma.c b/drivers/dma/timb_dma.c
index a1bf77c1993..2ec1ed56f20 100644
--- a/drivers/dma/timb_dma.c
+++ b/drivers/dma/timb_dma.c
@@ -200,8 +200,8 @@ static int td_fill_desc(struct timb_dma_chan *td_chan, u8 *dma_desc,
 		return -EINVAL;
 	}
 
-	dev_dbg(chan2dev(&td_chan->chan), "desc: %p, addr: %p\n",
-		dma_desc, (void *)sg_dma_address(sg));
+	dev_dbg(chan2dev(&td_chan->chan), "desc: %p, addr: 0x%llx\n",
+		dma_desc, (unsigned long long)sg_dma_address(sg));
 
 	dma_desc[7] = (sg_dma_address(sg) >> 24) & 0xff;
 	dma_desc[6] = (sg_dma_address(sg) >> 16) & 0xff;
@@ -382,7 +382,7 @@ static struct timb_dma_desc *td_alloc_init_desc(struct timb_dma_chan *td_chan)
 	td_desc = kzalloc(sizeof(struct timb_dma_desc), GFP_KERNEL);
 	if (!td_desc) {
 		dev_err(chan2dev(chan), "Failed to alloc descriptor\n");
-		goto err;
+		goto out;
 	}
 
 	td_desc->desc_list_len = td_chan->desc_elems * TIMB_DMA_DESC_SIZE;
@@ -410,7 +410,7 @@ static struct timb_dma_desc *td_alloc_init_desc(struct timb_dma_chan *td_chan)
 err:
 	kfree(td_desc->desc_list);
 	kfree(td_desc);
-
+out:
 	return NULL;
 
 }
diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index a9371b36a9b..fcf3ea28340 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -66,4 +66,28 @@ config FIREWIRE_NET
 
 source "drivers/ieee1394/Kconfig"
 
+config FIREWIRE_NOSY
+	tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
+	depends on PCI
+	help
+	  Nosy is an IEEE 1394 packet sniffer that is used for protocol
+	  analysis and in development of IEEE 1394 drivers, applications,
+	  or firmwares.
+
+	  This driver lets you use a Texas Instruments PCILynx 1394 to PCI
+	  link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
+	  PCILynx is a nowadays very rare IEEE 1394 controller which is
+	  not OHCI 1394 compliant.
+
+	  The following cards are known to be based on PCILynx or PCILynx-2:
+	  IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
+	  (PCI card), Newer Technology FireWire 2 Go (CardBus card),
+	  Apple Power Mac G3 blue & white (onboard controller).
+
+	  To compile this driver as a module, say M here:  The module will be
+	  called nosy.  Source code of a userspace interface to nosy, called
+	  nosy-dump, can be found in tools/firewire/ of the kernel sources.
+
+	  If unsure, say N.
+
 endmenu
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile
index a8f9bb6d9fd..3c6a7fb20aa 100644
--- a/drivers/firewire/Makefile
+++ b/drivers/firewire/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_FIREWIRE)      += firewire-core.o
 obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o
 obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o
 obj-$(CONFIG_FIREWIRE_NET)  += firewire-net.o
+obj-$(CONFIG_FIREWIRE_NOSY) += nosy.o
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index 371713ff026..be0492398ef 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -204,17 +204,62 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc)
 }
 EXPORT_SYMBOL(fw_core_remove_descriptor);
 
+static int reset_bus(struct fw_card *card, bool short_reset)
+{
+	int reg = short_reset ? 5 : 1;
+	int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET;
+
+	return card->driver->update_phy_reg(card, reg, 0, bit);
+}
+
+void fw_schedule_bus_reset(struct fw_card *card, bool delayed, bool short_reset)
+{
+	/* We don't try hard to sort out requests of long vs. short resets. */
+	card->br_short = short_reset;
+
+	/* Use an arbitrary short delay to combine multiple reset requests. */
+	fw_card_get(card);
+	if (!schedule_delayed_work(&card->br_work,
+				   delayed ? DIV_ROUND_UP(HZ, 100) : 0))
+		fw_card_put(card);
+}
+EXPORT_SYMBOL(fw_schedule_bus_reset);
+
+static void br_work(struct work_struct *work)
+{
+	struct fw_card *card = container_of(work, struct fw_card, br_work.work);
+
+	/* Delay for 2s after last reset per IEEE 1394 clause 8.2.1. */
+	if (card->reset_jiffies != 0 &&
+	    time_is_after_jiffies(card->reset_jiffies + 2 * HZ)) {
+		if (!schedule_delayed_work(&card->br_work, 2 * HZ))
+			fw_card_put(card);
+		return;
+	}
+
+	fw_send_phy_config(card, FW_PHY_CONFIG_NO_NODE_ID, card->generation,
+			   FW_PHY_CONFIG_CURRENT_GAP_COUNT);
+	reset_bus(card, card->br_short);
+	fw_card_put(card);
+}
+
 static void allocate_broadcast_channel(struct fw_card *card, int generation)
 {
 	int channel, bandwidth = 0;
 
-	fw_iso_resource_manage(card, generation, 1ULL << 31, &channel,
-			       &bandwidth, true, card->bm_transaction_data);
-	if (channel == 31) {
+	if (!card->broadcast_channel_allocated) {
+		fw_iso_resource_manage(card, generation, 1ULL << 31,
+				       &channel, &bandwidth, true,
+				       card->bm_transaction_data);
+		if (channel != 31) {
+			fw_notify("failed to allocate broadcast channel\n");
+			return;
+		}
 		card->broadcast_channel_allocated = true;
-		device_for_each_child(card->device, (void *)(long)generation,
-				      fw_device_set_broadcast_channel);
 	}
+
+	device_for_each_child(card->device, (void *)(long)generation,
+			      fw_device_set_broadcast_channel);
 }
 
 static const char gap_count_table[] = {
@@ -224,27 +269,26 @@ static const char gap_count_table[] = {
 void fw_schedule_bm_work(struct fw_card *card, unsigned long delay)
 {
 	fw_card_get(card);
-	if (!schedule_delayed_work(&card->work, delay))
+	if (!schedule_delayed_work(&card->bm_work, delay))
 		fw_card_put(card);
 }
 
-static void fw_card_bm_work(struct work_struct *work)
+static void bm_work(struct work_struct *work)
 {
-	struct fw_card *card = container_of(work, struct fw_card, work.work);
+	struct fw_card *card = container_of(work, struct fw_card, bm_work.work);
 	struct fw_device *root_device, *irm_device;
 	struct fw_node *root_node;
-	unsigned long flags;
-	int root_id, new_root_id, irm_id, local_id;
+	int root_id, new_root_id, irm_id, bm_id, local_id;
 	int gap_count, generation, grace, rcode;
 	bool do_reset = false;
 	bool root_device_is_running;
 	bool root_device_is_cmc;
 	bool irm_is_1394_1995_only;
 
-	spin_lock_irqsave(&card->lock, flags);
+	spin_lock_irq(&card->lock);
 
 	if (card->local_node == NULL) {
-		spin_unlock_irqrestore(&card->lock, flags);
+		spin_unlock_irq(&card->lock);
 		goto out_put_card;
 	}
 
@@ -267,7 +311,8 @@ static void fw_card_bm_work(struct work_struct *work)
 
 	grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 8));
 
-	if (is_next_generation(generation, card->bm_generation) ||
+	if ((is_next_generation(generation, card->bm_generation) &&
+	     !card->bm_abdicate) ||
 	    (card->bm_generation != generation && grace)) {
 		/*
 		 * This first step is to figure out who is IRM and
@@ -298,21 +343,26 @@ static void fw_card_bm_work(struct work_struct *work)
 		card->bm_transaction_data[0] = cpu_to_be32(0x3f);
 		card->bm_transaction_data[1] = cpu_to_be32(local_id);
 
-		spin_unlock_irqrestore(&card->lock, flags);
+		spin_unlock_irq(&card->lock);
 
 		rcode = fw_run_transaction(card, TCODE_LOCK_COMPARE_SWAP,
 				irm_id, generation, SCODE_100,
 				CSR_REGISTER_BASE + CSR_BUS_MANAGER_ID,
-				card->bm_transaction_data,
-				sizeof(card->bm_transaction_data));
+				card->bm_transaction_data, 8);
 
 		if (rcode == RCODE_GENERATION)
 			/* Another bus reset, BM work has been rescheduled. */
 			goto out;
 
-		if (rcode == RCODE_COMPLETE &&
-		    card->bm_transaction_data[0] != cpu_to_be32(0x3f)) {
+		bm_id = be32_to_cpu(card->bm_transaction_data[0]);
 
+		spin_lock_irq(&card->lock);
+		if (rcode == RCODE_COMPLETE && generation == card->generation)
+			card->bm_node_id =
+			    bm_id == 0x3f ? local_id : 0xffc0 | bm_id;
+		spin_unlock_irq(&card->lock);
+
+		if (rcode == RCODE_COMPLETE && bm_id != 0x3f) {
 			/* Somebody else is BM.  Only act as IRM. */
 			if (local_id == irm_id)
 				allocate_broadcast_channel(card, generation);
@@ -320,7 +370,17 @@ static void fw_card_bm_work(struct work_struct *work)
 			goto out;
 		}
 
-		spin_lock_irqsave(&card->lock, flags);
+		if (rcode == RCODE_SEND_ERROR) {
+			/*
+			 * We have been unable to send the lock request due to
+			 * some local problem.  Let's try again later and hope
+			 * that the problem has gone away by then.
+			 */
+			fw_schedule_bm_work(card, DIV_ROUND_UP(HZ, 8));
+			goto out;
+		}
+
+		spin_lock_irq(&card->lock);
 
 		if (rcode != RCODE_COMPLETE) {
 			/*
@@ -339,7 +399,7 @@ static void fw_card_bm_work(struct work_struct *work)
 		 * We weren't BM in the last generation, and the last
 		 * bus reset is less than 125ms ago.  Reschedule this job.
 		 */
-		spin_unlock_irqrestore(&card->lock, flags);
+		spin_unlock_irq(&card->lock);
 		fw_schedule_bm_work(card, DIV_ROUND_UP(HZ, 8));
 		goto out;
 	}
@@ -362,14 +422,12 @@ static void fw_card_bm_work(struct work_struct *work)
 		 * If we haven't probed this device yet, bail out now
 		 * and let's try again once that's done.
 		 */
-		spin_unlock_irqrestore(&card->lock, flags);
+		spin_unlock_irq(&card->lock);
 		goto out;
 	} else if (root_device_is_cmc) {
 		/*
-		 * FIXME: I suppose we should set the cmstr bit in the
-		 * STATE_CLEAR register of this node, as described in
-		 * 1394-1995, 8.4.2.6.  Also, send out a force root
-		 * packet for this node.
+		 * We will send out a force root packet for this
+		 * node as part of the gap count optimization.
 		 */
 		new_root_id = root_id;
 	} else {
@@ -402,19 +460,33 @@ static void fw_card_bm_work(struct work_struct *work)
 	    (card->gap_count != gap_count || new_root_id != root_id))
 		do_reset = true;
 
-	spin_unlock_irqrestore(&card->lock, flags);
+	spin_unlock_irq(&card->lock);
 
 	if (do_reset) {
 		fw_notify("phy config: card %d, new root=%x, gap_count=%d\n",
 			  card->index, new_root_id, gap_count);
 		fw_send_phy_config(card, new_root_id, generation, gap_count);
-		fw_core_initiate_bus_reset(card, 1);
+		reset_bus(card, true);
 		/* Will allocate broadcast channel after the reset. */
-	} else {
-		if (local_id == irm_id)
-			allocate_broadcast_channel(card, generation);
+		goto out;
+	}
+
+	if (root_device_is_cmc) {
+		/*
+		 * Make sure that the cycle master sends cycle start packets.
+		 */
+		card->bm_transaction_data[0] = cpu_to_be32(CSR_STATE_BIT_CMSTR);
+		rcode = fw_run_transaction(card, TCODE_WRITE_QUADLET_REQUEST,
+				root_id, generation, SCODE_100,
+				CSR_REGISTER_BASE + CSR_STATE_SET,
+				card->bm_transaction_data, 4);
+		if (rcode == RCODE_GENERATION)
+			goto out;
 	}
 
+	if (local_id == irm_id)
+		allocate_broadcast_channel(card, generation);
+
  out:
 	fw_node_put(root_node);
  out_put_card:
@@ -432,17 +504,23 @@ void fw_card_initialize(struct fw_card *card,
 	card->device = device;
 	card->current_tlabel = 0;
 	card->tlabel_mask = 0;
+	card->split_timeout_hi = 0;
+	card->split_timeout_lo = 800 << 19;
+	card->split_timeout_cycles = 800;
+	card->split_timeout_jiffies = DIV_ROUND_UP(HZ, 10);
 	card->color = 0;
 	card->broadcast_channel = BROADCAST_CHANNEL_INITIAL;
 
 	kref_init(&card->kref);
 	init_completion(&card->done);
 	INIT_LIST_HEAD(&card->transaction_list);
+	INIT_LIST_HEAD(&card->phy_receiver_list);
 	spin_lock_init(&card->lock);
 
 	card->local_node = NULL;
 
-	INIT_DELAYED_WORK(&card->work, fw_card_bm_work);
+	INIT_DELAYED_WORK(&card->br_work, br_work);
+	INIT_DELAYED_WORK(&card->bm_work, bm_work);
 }
 EXPORT_SYMBOL(fw_card_initialize);
 
@@ -468,20 +546,22 @@ int fw_card_add(struct fw_card *card,
 }
 EXPORT_SYMBOL(fw_card_add);
 
-
 /*
  * The next few functions implement a dummy driver that is used once a card
  * driver shuts down an fw_card.  This allows the driver to cleanly unload,
  * as all IO to the card will be handled (and failed) by the dummy driver
  * instead of calling into the module.  Only functions for iso context
  * shutdown still need to be provided by the card driver.
+ *
+ * .read/write_csr() should never be called anymore after the dummy driver
+ * was bound since they are only used within request handler context.
+ * .set_config_rom() is never called since the card is taken out of card_list
+ * before switching to the dummy driver.
  */
 
-static int dummy_enable(struct fw_card *card,
-			const __be32 *config_rom, size_t length)
+static int dummy_read_phy_reg(struct fw_card *card, int address)
 {
-	BUG();
-	return -1;
+	return -ENODEV;
 }
 
 static int dummy_update_phy_reg(struct fw_card *card, int address,
@@ -490,25 +570,14 @@ static int dummy_update_phy_reg(struct fw_card *card, int address,
 	return -ENODEV;
 }
 
-static int dummy_set_config_rom(struct fw_card *card,
-				const __be32 *config_rom, size_t length)
-{
-	/*
-	 * We take the card out of card_list before setting the dummy
-	 * driver, so this should never get called.
-	 */
-	BUG();
-	return -1;
-}
-
 static void dummy_send_request(struct fw_card *card, struct fw_packet *packet)
 {
-	packet->callback(packet, card, -ENODEV);
+	packet->callback(packet, card, RCODE_CANCELLED);
 }
 
 static void dummy_send_response(struct fw_card *card, struct fw_packet *packet)
 {
-	packet->callback(packet, card, -ENODEV);
+	packet->callback(packet, card, RCODE_CANCELLED);
 }
 
 static int dummy_cancel_packet(struct fw_card *card, struct fw_packet *packet)
@@ -522,14 +591,40 @@ static int dummy_enable_phys_dma(struct fw_card *card,
 	return -ENODEV;
 }
 
+static struct fw_iso_context *dummy_allocate_iso_context(struct fw_card *card,
+				int type, int channel, size_t header_size)
+{
+	return ERR_PTR(-ENODEV);
+}
+
+static int dummy_start_iso(struct fw_iso_context *ctx,
+			   s32 cycle, u32 sync, u32 tags)
+{
+	return -ENODEV;
+}
+
+static int dummy_set_iso_channels(struct fw_iso_context *ctx, u64 *channels)
+{
+	return -ENODEV;
+}
+
+static int dummy_queue_iso(struct fw_iso_context *ctx, struct fw_iso_packet *p,
+			   struct fw_iso_buffer *buffer, unsigned long payload)
+{
+	return -ENODEV;
+}
+
 static const struct fw_card_driver dummy_driver_template = {
-	.enable          = dummy_enable,
-	.update_phy_reg  = dummy_update_phy_reg,
-	.set_config_rom  = dummy_set_config_rom,
-	.send_request    = dummy_send_request,
-	.cancel_packet   = dummy_cancel_packet,
-	.send_response   = dummy_send_response,
-	.enable_phys_dma = dummy_enable_phys_dma,
+	.read_phy_reg		= dummy_read_phy_reg,
+	.update_phy_reg		= dummy_update_phy_reg,
+	.send_request		= dummy_send_request,
+	.send_response		= dummy_send_response,
+	.cancel_packet		= dummy_cancel_packet,
+	.enable_phys_dma	= dummy_enable_phys_dma,
+	.allocate_iso_context	= dummy_allocate_iso_context,
+	.start_iso		= dummy_start_iso,
+	.set_iso_channels	= dummy_set_iso_channels,
+	.queue_iso		= dummy_queue_iso,
 };
 
 void fw_card_release(struct kref *kref)
@@ -545,7 +640,7 @@ void fw_core_remove_card(struct fw_card *card)
 
 	card->driver->update_phy_reg(card, 4,
 				     PHY_LINK_ACTIVE | PHY_CONTENDER, 0);
-	fw_core_initiate_bus_reset(card, 1);
+	fw_schedule_bus_reset(card, false, true);
 
 	mutex_lock(&card_mutex);
 	list_del_init(&card->link);
@@ -565,12 +660,3 @@ void fw_core_remove_card(struct fw_card *card)
 	WARN_ON(!list_empty(&card->transaction_list));
 }
 EXPORT_SYMBOL(fw_core_remove_card);
-
-int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset)
-{
-	int reg = short_reset ? 5 : 1;
-	int bit = short_reset ? PHY_BUS_SHORT_RESET : PHY_BUS_RESET;
-
-	return card->driver->update_phy_reg(card, reg, 0, bit);
-}
-EXPORT_SYMBOL(fw_core_initiate_bus_reset);
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 5bf106b9d79..14bb7b7b5dd 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -18,6 +18,7 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/bug.h>
 #include <linux/compat.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -33,7 +34,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
-#include <linux/sched.h>
+#include <linux/sched.h> /* required for linux/wait.h */
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
@@ -47,6 +48,13 @@
 
 #include "core.h"
 
+/*
+ * ABI version history is documented in linux/firewire-cdev.h.
+ */
+#define FW_CDEV_KERNEL_VERSION			4
+#define FW_CDEV_VERSION_EVENT_REQUEST2		4
+#define FW_CDEV_VERSION_ALLOCATE_REGION_END	4
+
 struct client {
 	u32 version;
 	struct fw_device *device;
@@ -63,6 +71,9 @@ struct client {
 	struct fw_iso_buffer buffer;
 	unsigned long vm_start;
 
+	struct list_head phy_receiver_link;
+	u64 phy_receiver_closure;
+
 	struct list_head link;
 	struct kref kref;
 };
@@ -107,6 +118,7 @@ struct outbound_transaction_resource {
 
 struct inbound_transaction_resource {
 	struct client_resource resource;
+	struct fw_card *card;
 	struct fw_request *request;
 	void *data;
 	size_t length;
@@ -171,7 +183,10 @@ struct outbound_transaction_event {
 
 struct inbound_transaction_event {
 	struct event event;
-	struct fw_cdev_event_request request;
+	union {
+		struct fw_cdev_event_request request;
+		struct fw_cdev_event_request2 request2;
+	} req;
 };
 
 struct iso_interrupt_event {
@@ -179,11 +194,28 @@ struct iso_interrupt_event {
 	struct fw_cdev_event_iso_interrupt interrupt;
 };
 
+struct iso_interrupt_mc_event {
+	struct event event;
+	struct fw_cdev_event_iso_interrupt_mc interrupt;
+};
+
 struct iso_resource_event {
 	struct event event;
 	struct fw_cdev_event_iso_resource iso_resource;
 };
 
+struct outbound_phy_packet_event {
+	struct event event;
+	struct client *client;
+	struct fw_packet p;
+	struct fw_cdev_event_phy_packet phy_packet;
+};
+
+struct inbound_phy_packet_event {
+	struct event event;
+	struct fw_cdev_event_phy_packet phy_packet;
+};
+
 static inline void __user *u64_to_uptr(__u64 value)
 {
 	return (void __user *)(unsigned long)value;
@@ -219,6 +251,7 @@ static int fw_device_op_open(struct inode *inode, struct file *file)
 	idr_init(&client->resource_idr);
 	INIT_LIST_HEAD(&client->event_list);
 	init_waitqueue_head(&client->wait);
+	INIT_LIST_HEAD(&client->phy_receiver_link);
 	kref_init(&client->kref);
 
 	file->private_data = client;
@@ -309,7 +342,7 @@ static void fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
 	event->generation    = client->device->generation;
 	event->node_id       = client->device->node_id;
 	event->local_node_id = card->local_node->node_id;
-	event->bm_node_id    = 0; /* FIXME: We don't track the BM. */
+	event->bm_node_id    = card->bm_node_id;
 	event->irm_node_id   = card->irm_node->node_id;
 	event->root_node_id  = card->root_node->node_id;
 
@@ -340,7 +373,7 @@ static void queue_bus_reset_event(struct client *client)
 
 	e = kzalloc(sizeof(*e), GFP_KERNEL);
 	if (e == NULL) {
-		fw_notify("Out of memory when allocating bus reset event\n");
+		fw_notify("Out of memory when allocating event\n");
 		return;
 	}
 
@@ -386,6 +419,9 @@ union ioctl_arg {
 	struct fw_cdev_allocate_iso_resource	allocate_iso_resource;
 	struct fw_cdev_send_stream_packet	send_stream_packet;
 	struct fw_cdev_get_cycle_timer2		get_cycle_timer2;
+	struct fw_cdev_send_phy_packet		send_phy_packet;
+	struct fw_cdev_receive_phy_packets	receive_phy_packets;
+	struct fw_cdev_set_iso_channels		set_iso_channels;
 };
 
 static int ioctl_get_info(struct client *client, union ioctl_arg *arg)
@@ -395,7 +431,7 @@ static int ioctl_get_info(struct client *client, union ioctl_arg *arg)
 	unsigned long ret = 0;
 
 	client->version = a->version;
-	a->version = FW_CDEV_VERSION;
+	a->version = FW_CDEV_KERNEL_VERSION;
 	a->card = client->device->card->index;
 
 	down_read(&fw_device_rwsem);
@@ -554,6 +590,10 @@ static int init_request(struct client *client,
 	    (request->length > 4096 || request->length > 512 << speed))
 		return -EIO;
 
+	if (request->tcode == TCODE_WRITE_QUADLET_REQUEST &&
+	    request->length < 4)
+		return -EINVAL;
+
 	e = kmalloc(sizeof(*e) + request->length, GFP_KERNEL);
 	if (e == NULL)
 		return -ENOMEM;
@@ -626,28 +666,34 @@ static void release_request(struct client *client,
 	if (is_fcp_request(r->request))
 		kfree(r->data);
 	else
-		fw_send_response(client->device->card, r->request,
-				 RCODE_CONFLICT_ERROR);
+		fw_send_response(r->card, r->request, RCODE_CONFLICT_ERROR);
+
+	fw_card_put(r->card);
 	kfree(r);
 }
 
 static void handle_request(struct fw_card *card, struct fw_request *request,
 			   int tcode, int destination, int source,
-			   int generation, int speed,
-			   unsigned long long offset,
+			   int generation, unsigned long long offset,
 			   void *payload, size_t length, void *callback_data)
 {
 	struct address_handler_resource *handler = callback_data;
 	struct inbound_transaction_resource *r;
 	struct inbound_transaction_event *e;
+	size_t event_size0;
 	void *fcp_frame = NULL;
 	int ret;
 
+	/* card may be different from handler->client->device->card */
+	fw_card_get(card);
+
 	r = kmalloc(sizeof(*r), GFP_ATOMIC);
 	e = kmalloc(sizeof(*e), GFP_ATOMIC);
-	if (r == NULL || e == NULL)
+	if (r == NULL || e == NULL) {
+		fw_notify("Out of memory when allocating event\n");
 		goto failed;
-
+	}
+	r->card    = card;
 	r->request = request;
 	r->data    = payload;
 	r->length  = length;
@@ -669,15 +715,37 @@ static void handle_request(struct fw_card *card, struct fw_request *request,
 	if (ret < 0)
 		goto failed;
 
-	e->request.type    = FW_CDEV_EVENT_REQUEST;
-	e->request.tcode   = tcode;
-	e->request.offset  = offset;
-	e->request.length  = length;
-	e->request.handle  = r->resource.handle;
-	e->request.closure = handler->closure;
+	if (handler->client->version < FW_CDEV_VERSION_EVENT_REQUEST2) {
+		struct fw_cdev_event_request *req = &e->req.request;
+
+		if (tcode & 0x10)
+			tcode = TCODE_LOCK_REQUEST;
+
+		req->type	= FW_CDEV_EVENT_REQUEST;
+		req->tcode	= tcode;
+		req->offset	= offset;
+		req->length	= length;
+		req->handle	= r->resource.handle;
+		req->closure	= handler->closure;
+		event_size0	= sizeof(*req);
+	} else {
+		struct fw_cdev_event_request2 *req = &e->req.request2;
+
+		req->type	= FW_CDEV_EVENT_REQUEST2;
+		req->tcode	= tcode;
+		req->offset	= offset;
+		req->source_node_id = source;
+		req->destination_node_id = destination;
+		req->card	= card->index;
+		req->generation	= generation;
+		req->length	= length;
+		req->handle	= r->resource.handle;
+		req->closure	= handler->closure;
+		event_size0	= sizeof(*req);
+	}
 
 	queue_event(handler->client, &e->event,
-		    &e->request, sizeof(e->request), r->data, length);
+		    &e->req, event_size0, r->data, length);
 	return;
 
  failed:
@@ -687,6 +755,8 @@ static void handle_request(struct fw_card *card, struct fw_request *request,
 
 	if (!is_fcp_request(request))
 		fw_send_response(card, request, RCODE_CONFLICT_ERROR);
+
+	fw_card_put(card);
 }
 
 static void release_address_handler(struct client *client,
@@ -711,7 +781,11 @@ static int ioctl_allocate(struct client *client, union ioctl_arg *arg)
 		return -ENOMEM;
 
 	region.start = a->offset;
-	region.end   = a->offset + a->length;
+	if (client->version < FW_CDEV_VERSION_ALLOCATE_REGION_END)
+		region.end = a->offset + a->length;
+	else
+		region.end = a->region_end;
+
 	r->handler.length           = a->length;
 	r->handler.address_callback = handle_request;
 	r->handler.callback_data    = r;
@@ -723,6 +797,7 @@ static int ioctl_allocate(struct client *client, union ioctl_arg *arg)
 		kfree(r);
 		return ret;
 	}
+	a->offset = r->handler.offset;
 
 	r->resource.release = release_address_handler;
 	ret = add_client_resource(client, &r->resource, GFP_KERNEL);
@@ -757,15 +832,19 @@ static int ioctl_send_response(struct client *client, union ioctl_arg *arg)
 	if (is_fcp_request(r->request))
 		goto out;
 
-	if (a->length < r->length)
-		r->length = a->length;
-	if (copy_from_user(r->data, u64_to_uptr(a->data), r->length)) {
+	if (a->length != fw_get_response_length(r->request)) {
+		ret = -EINVAL;
+		kfree(r->request);
+		goto out;
+	}
+	if (copy_from_user(r->data, u64_to_uptr(a->data), a->length)) {
 		ret = -EFAULT;
 		kfree(r->request);
 		goto out;
 	}
-	fw_send_response(client->device->card, r->request, a->rcode);
+	fw_send_response(r->card, r->request, a->rcode);
  out:
+	fw_card_put(r->card);
 	kfree(r);
 
 	return ret;
@@ -773,8 +852,9 @@ static int ioctl_send_response(struct client *client, union ioctl_arg *arg)
 
 static int ioctl_initiate_bus_reset(struct client *client, union ioctl_arg *arg)
 {
-	return fw_core_initiate_bus_reset(client->device->card,
+	fw_schedule_bus_reset(client->device->card, true,
 			arg->initiate_bus_reset.type == FW_CDEV_SHORT_RESET);
+	return 0;
 }
 
 static void release_descriptor(struct client *client,
@@ -845,10 +925,11 @@ static void iso_callback(struct fw_iso_context *context, u32 cycle,
 	struct client *client = data;
 	struct iso_interrupt_event *e;
 
-	e = kzalloc(sizeof(*e) + header_length, GFP_ATOMIC);
-	if (e == NULL)
+	e = kmalloc(sizeof(*e) + header_length, GFP_ATOMIC);
+	if (e == NULL) {
+		fw_notify("Out of memory when allocating event\n");
 		return;
-
+	}
 	e->interrupt.type      = FW_CDEV_EVENT_ISO_INTERRUPT;
 	e->interrupt.closure   = client->iso_closure;
 	e->interrupt.cycle     = cycle;
@@ -858,27 +939,54 @@ static void iso_callback(struct fw_iso_context *context, u32 cycle,
 		    sizeof(e->interrupt) + header_length, NULL, 0);
 }
 
+static void iso_mc_callback(struct fw_iso_context *context,
+			    dma_addr_t completed, void *data)
+{
+	struct client *client = data;
+	struct iso_interrupt_mc_event *e;
+
+	e = kmalloc(sizeof(*e), GFP_ATOMIC);
+	if (e == NULL) {
+		fw_notify("Out of memory when allocating event\n");
+		return;
+	}
+	e->interrupt.type      = FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL;
+	e->interrupt.closure   = client->iso_closure;
+	e->interrupt.completed = fw_iso_buffer_lookup(&client->buffer,
+						      completed);
+	queue_event(client, &e->event, &e->interrupt,
+		    sizeof(e->interrupt), NULL, 0);
+}
+
 static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg)
 {
 	struct fw_cdev_create_iso_context *a = &arg->create_iso_context;
 	struct fw_iso_context *context;
+	fw_iso_callback_t cb;
 
-	/* We only support one context at this time. */
-	if (client->iso_context != NULL)
-		return -EBUSY;
-
-	if (a->channel > 63)
-		return -EINVAL;
+	BUILD_BUG_ON(FW_CDEV_ISO_CONTEXT_TRANSMIT != FW_ISO_CONTEXT_TRANSMIT ||
+		     FW_CDEV_ISO_CONTEXT_RECEIVE  != FW_ISO_CONTEXT_RECEIVE  ||
+		     FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL !=
+					FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL);
 
 	switch (a->type) {
-	case FW_ISO_CONTEXT_RECEIVE:
-		if (a->header_size < 4 || (a->header_size & 3))
+	case FW_ISO_CONTEXT_TRANSMIT:
+		if (a->speed > SCODE_3200 || a->channel > 63)
 			return -EINVAL;
+
+		cb = iso_callback;
 		break;
 
-	case FW_ISO_CONTEXT_TRANSMIT:
-		if (a->speed > SCODE_3200)
+	case FW_ISO_CONTEXT_RECEIVE:
+		if (a->header_size < 4 || (a->header_size & 3) ||
+		    a->channel > 63)
 			return -EINVAL;
+
+		cb = iso_callback;
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		cb = (fw_iso_callback_t)iso_mc_callback;
 		break;
 
 	default:
@@ -886,20 +994,37 @@ static int ioctl_create_iso_context(struct client *client, union ioctl_arg *arg)
 	}
 
 	context = fw_iso_context_create(client->device->card, a->type,
-					a->channel, a->speed, a->header_size,
-					iso_callback, client);
+			a->channel, a->speed, a->header_size, cb, client);
 	if (IS_ERR(context))
 		return PTR_ERR(context);
 
+	/* We only support one context at this time. */
+	spin_lock_irq(&client->lock);
+	if (client->iso_context != NULL) {
+		spin_unlock_irq(&client->lock);
+		fw_iso_context_destroy(context);
+		return -EBUSY;
+	}
 	client->iso_closure = a->closure;
 	client->iso_context = context;
+	spin_unlock_irq(&client->lock);
 
-	/* We only support one context at this time. */
 	a->handle = 0;
 
 	return 0;
 }
 
+static int ioctl_set_iso_channels(struct client *client, union ioctl_arg *arg)
+{
+	struct fw_cdev_set_iso_channels *a = &arg->set_iso_channels;
+	struct fw_iso_context *ctx = client->iso_context;
+
+	if (ctx == NULL || a->handle != 0)
+		return -EINVAL;
+
+	return fw_iso_context_set_channels(ctx, &a->channels);
+}
+
 /* Macros for decoding the iso packet control header. */
 #define GET_PAYLOAD_LENGTH(v)	((v) & 0xffff)
 #define GET_INTERRUPT(v)	(((v) >> 16) & 0x01)
@@ -913,7 +1038,7 @@ static int ioctl_queue_iso(struct client *client, union ioctl_arg *arg)
 	struct fw_cdev_queue_iso *a = &arg->queue_iso;
 	struct fw_cdev_iso_packet __user *p, *end, *next;
 	struct fw_iso_context *ctx = client->iso_context;
-	unsigned long payload, buffer_end, header_length;
+	unsigned long payload, buffer_end, transmit_header_bytes = 0;
 	u32 control;
 	int count;
 	struct {
@@ -933,7 +1058,6 @@ static int ioctl_queue_iso(struct client *client, union ioctl_arg *arg)
 	 * use the indirect payload, the iso buffer need not be mapped
 	 * and the a->data pointer is ignored.
 	 */
-
 	payload = (unsigned long)a->data - client->vm_start;
 	buffer_end = client->buffer.page_count << PAGE_SHIFT;
 	if (a->data == 0 || client->buffer.pages == NULL ||
@@ -942,8 +1066,10 @@ static int ioctl_queue_iso(struct client *client, union ioctl_arg *arg)
 		buffer_end = 0;
 	}
 
-	p = (struct fw_cdev_iso_packet __user *)u64_to_uptr(a->packets);
+	if (ctx->type == FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL && payload & 3)
+		return -EINVAL;
 
+	p = (struct fw_cdev_iso_packet __user *)u64_to_uptr(a->packets);
 	if (!access_ok(VERIFY_READ, p, a->size))
 		return -EFAULT;
 
@@ -959,31 +1085,32 @@ static int ioctl_queue_iso(struct client *client, union ioctl_arg *arg)
 		u.packet.sy = GET_SY(control);
 		u.packet.header_length = GET_HEADER_LENGTH(control);
 
-		if (ctx->type == FW_ISO_CONTEXT_TRANSMIT) {
-			if (u.packet.header_length % 4 != 0)
+		switch (ctx->type) {
+		case FW_ISO_CONTEXT_TRANSMIT:
+			if (u.packet.header_length & 3)
+				return -EINVAL;
+			transmit_header_bytes = u.packet.header_length;
+			break;
+
+		case FW_ISO_CONTEXT_RECEIVE:
+			if (u.packet.header_length == 0 ||
+			    u.packet.header_length % ctx->header_size != 0)
 				return -EINVAL;
-			header_length = u.packet.header_length;
-		} else {
-			/*
-			 * We require that header_length is a multiple of
-			 * the fixed header size, ctx->header_size.
-			 */
-			if (ctx->header_size == 0) {
-				if (u.packet.header_length > 0)
-					return -EINVAL;
-			} else if (u.packet.header_length == 0 ||
-				   u.packet.header_length % ctx->header_size != 0) {
+			break;
+
+		case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+			if (u.packet.payload_length == 0 ||
+			    u.packet.payload_length & 3)
 				return -EINVAL;
-			}
-			header_length = 0;
+			break;
 		}
 
 		next = (struct fw_cdev_iso_packet __user *)
-			&p->header[header_length / 4];
+			&p->header[transmit_header_bytes / 4];
 		if (next > end)
 			return -EINVAL;
 		if (__copy_from_user
-		    (u.packet.header, p->header, header_length))
+		    (u.packet.header, p->header, transmit_header_bytes))
 			return -EFAULT;
 		if (u.packet.skip && ctx->type == FW_ISO_CONTEXT_TRANSMIT &&
 		    u.packet.header_length + u.packet.payload_length > 0)
@@ -1011,6 +1138,13 @@ static int ioctl_start_iso(struct client *client, union ioctl_arg *arg)
 {
 	struct fw_cdev_start_iso *a = &arg->start_iso;
 
+	BUILD_BUG_ON(
+	    FW_CDEV_ISO_CONTEXT_MATCH_TAG0 != FW_ISO_CONTEXT_MATCH_TAG0 ||
+	    FW_CDEV_ISO_CONTEXT_MATCH_TAG1 != FW_ISO_CONTEXT_MATCH_TAG1 ||
+	    FW_CDEV_ISO_CONTEXT_MATCH_TAG2 != FW_ISO_CONTEXT_MATCH_TAG2 ||
+	    FW_CDEV_ISO_CONTEXT_MATCH_TAG3 != FW_ISO_CONTEXT_MATCH_TAG3 ||
+	    FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS != FW_ISO_CONTEXT_MATCH_ALL_TAGS);
+
 	if (client->iso_context == NULL || a->handle != 0)
 		return -EINVAL;
 
@@ -1042,7 +1176,7 @@ static int ioctl_get_cycle_timer2(struct client *client, union ioctl_arg *arg)
 
 	local_irq_disable();
 
-	cycle_time = card->driver->get_cycle_time(card);
+	cycle_time = card->driver->read_csr(card, CSR_CYCLE_TIME);
 
 	switch (a->clk_id) {
 	case CLOCK_REALTIME:      getnstimeofday(&ts);                   break;
@@ -1323,28 +1457,135 @@ static int ioctl_send_stream_packet(struct client *client, union ioctl_arg *arg)
 	return init_request(client, &request, dest, a->speed);
 }
 
+static void outbound_phy_packet_callback(struct fw_packet *packet,
+					 struct fw_card *card, int status)
+{
+	struct outbound_phy_packet_event *e =
+		container_of(packet, struct outbound_phy_packet_event, p);
+
+	switch (status) {
+	/* expected: */
+	case ACK_COMPLETE:	e->phy_packet.rcode = RCODE_COMPLETE;	break;
+	/* should never happen with PHY packets: */
+	case ACK_PENDING:	e->phy_packet.rcode = RCODE_COMPLETE;	break;
+	case ACK_BUSY_X:
+	case ACK_BUSY_A:
+	case ACK_BUSY_B:	e->phy_packet.rcode = RCODE_BUSY;	break;
+	case ACK_DATA_ERROR:	e->phy_packet.rcode = RCODE_DATA_ERROR;	break;
+	case ACK_TYPE_ERROR:	e->phy_packet.rcode = RCODE_TYPE_ERROR;	break;
+	/* stale generation; cancelled; on certain controllers: no ack */
+	default:		e->phy_packet.rcode = status;		break;
+	}
+	e->phy_packet.data[0] = packet->timestamp;
+
+	queue_event(e->client, &e->event, &e->phy_packet,
+		    sizeof(e->phy_packet) + e->phy_packet.length, NULL, 0);
+	client_put(e->client);
+}
+
+static int ioctl_send_phy_packet(struct client *client, union ioctl_arg *arg)
+{
+	struct fw_cdev_send_phy_packet *a = &arg->send_phy_packet;
+	struct fw_card *card = client->device->card;
+	struct outbound_phy_packet_event *e;
+
+	/* Access policy: Allow this ioctl only on local nodes' device files. */
+	if (!client->device->is_local)
+		return -ENOSYS;
+
+	e = kzalloc(sizeof(*e) + 4, GFP_KERNEL);
+	if (e == NULL)
+		return -ENOMEM;
+
+	client_get(client);
+	e->client		= client;
+	e->p.speed		= SCODE_100;
+	e->p.generation		= a->generation;
+	e->p.header[0]		= a->data[0];
+	e->p.header[1]		= a->data[1];
+	e->p.header_length	= 8;
+	e->p.callback		= outbound_phy_packet_callback;
+	e->phy_packet.closure	= a->closure;
+	e->phy_packet.type	= FW_CDEV_EVENT_PHY_PACKET_SENT;
+	if (is_ping_packet(a->data))
+			e->phy_packet.length = 4;
+
+	card->driver->send_request(card, &e->p);
+
+	return 0;
+}
+
+static int ioctl_receive_phy_packets(struct client *client, union ioctl_arg *arg)
+{
+	struct fw_cdev_receive_phy_packets *a = &arg->receive_phy_packets;
+	struct fw_card *card = client->device->card;
+
+	/* Access policy: Allow this ioctl only on local nodes' device files. */
+	if (!client->device->is_local)
+		return -ENOSYS;
+
+	spin_lock_irq(&card->lock);
+
+	list_move_tail(&client->phy_receiver_link, &card->phy_receiver_list);
+	client->phy_receiver_closure = a->closure;
+
+	spin_unlock_irq(&card->lock);
+
+	return 0;
+}
+
+void fw_cdev_handle_phy_packet(struct fw_card *card, struct fw_packet *p)
+{
+	struct client *client;
+	struct inbound_phy_packet_event *e;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->lock, flags);
+
+	list_for_each_entry(client, &card->phy_receiver_list, phy_receiver_link) {
+		e = kmalloc(sizeof(*e) + 8, GFP_ATOMIC);
+		if (e == NULL) {
+			fw_notify("Out of memory when allocating event\n");
+			break;
+		}
+		e->phy_packet.closure	= client->phy_receiver_closure;
+		e->phy_packet.type	= FW_CDEV_EVENT_PHY_PACKET_RECEIVED;
+		e->phy_packet.rcode	= RCODE_COMPLETE;
+		e->phy_packet.length	= 8;
+		e->phy_packet.data[0]	= p->header[1];
+		e->phy_packet.data[1]	= p->header[2];
+		queue_event(client, &e->event,
+			    &e->phy_packet, sizeof(e->phy_packet) + 8, NULL, 0);
+	}
+
+	spin_unlock_irqrestore(&card->lock, flags);
+}
+
 static int (* const ioctl_handlers[])(struct client *, union ioctl_arg *) = {
-	ioctl_get_info,
-	ioctl_send_request,
-	ioctl_allocate,
-	ioctl_deallocate,
-	ioctl_send_response,
-	ioctl_initiate_bus_reset,
-	ioctl_add_descriptor,
-	ioctl_remove_descriptor,
-	ioctl_create_iso_context,
-	ioctl_queue_iso,
-	ioctl_start_iso,
-	ioctl_stop_iso,
-	ioctl_get_cycle_timer,
-	ioctl_allocate_iso_resource,
-	ioctl_deallocate_iso_resource,
-	ioctl_allocate_iso_resource_once,
-	ioctl_deallocate_iso_resource_once,
-	ioctl_get_speed,
-	ioctl_send_broadcast_request,
-	ioctl_send_stream_packet,
-	ioctl_get_cycle_timer2,
+	[0x00] = ioctl_get_info,
+	[0x01] = ioctl_send_request,
+	[0x02] = ioctl_allocate,
+	[0x03] = ioctl_deallocate,
+	[0x04] = ioctl_send_response,
+	[0x05] = ioctl_initiate_bus_reset,
+	[0x06] = ioctl_add_descriptor,
+	[0x07] = ioctl_remove_descriptor,
+	[0x08] = ioctl_create_iso_context,
+	[0x09] = ioctl_queue_iso,
+	[0x0a] = ioctl_start_iso,
+	[0x0b] = ioctl_stop_iso,
+	[0x0c] = ioctl_get_cycle_timer,
+	[0x0d] = ioctl_allocate_iso_resource,
+	[0x0e] = ioctl_deallocate_iso_resource,
+	[0x0f] = ioctl_allocate_iso_resource_once,
+	[0x10] = ioctl_deallocate_iso_resource_once,
+	[0x11] = ioctl_get_speed,
+	[0x12] = ioctl_send_broadcast_request,
+	[0x13] = ioctl_send_stream_packet,
+	[0x14] = ioctl_get_cycle_timer2,
+	[0x15] = ioctl_send_phy_packet,
+	[0x16] = ioctl_receive_phy_packets,
+	[0x17] = ioctl_set_iso_channels,
 };
 
 static int dispatch_ioctl(struct client *client,
@@ -1452,6 +1693,10 @@ static int fw_device_op_release(struct inode *inode, struct file *file)
 	struct client *client = file->private_data;
 	struct event *event, *next_event;
 
+	spin_lock_irq(&client->device->card->lock);
+	list_del(&client->phy_receiver_link);
+	spin_unlock_irq(&client->device->card->lock);
+
 	mutex_lock(&client->device->client_list_mutex);
 	list_del(&client->link);
 	mutex_unlock(&client->device->client_list_mutex);
diff --git a/drivers/firewire/core-device.c b/drivers/firewire/core-device.c
index 4b8523f00dc..6113b896e79 100644
--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -107,11 +107,11 @@ static int textual_leaf_to_string(const u32 *block, char *buf, size_t size)
 }
 
 /**
- * fw_csr_string - reads a string from the configuration ROM
- * @directory: e.g. root directory or unit directory
- * @key: the key of the preceding directory entry
- * @buf: where to put the string
- * @size: size of @buf, in bytes
+ * fw_csr_string() - reads a string from the configuration ROM
+ * @directory:	e.g. root directory or unit directory
+ * @key:	the key of the preceding directory entry
+ * @buf:	where to put the string
+ * @size:	size of @buf, in bytes
  *
  * The string is taken from a minimal ASCII text descriptor leaf after
  * the immediate entry with @key.  The string is zero-terminated.
@@ -1136,6 +1136,7 @@ static void fw_device_refresh(struct work_struct *work)
 		goto give_up;
 	}
 
+	fw_device_cdev_update(device);
 	create_units(device);
 
 	/* Userspace may want to re-read attributes. */
diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c
index 8f5aebfb29d..c003fa4e2db 100644
--- a/drivers/firewire/core-iso.c
+++ b/drivers/firewire/core-iso.c
@@ -118,6 +118,23 @@ void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer,
 }
 EXPORT_SYMBOL(fw_iso_buffer_destroy);
 
+/* Convert DMA address to offset into virtually contiguous buffer. */
+size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed)
+{
+	int i;
+	dma_addr_t address;
+	ssize_t offset;
+
+	for (i = 0; i < buffer->page_count; i++) {
+		address = page_private(buffer->pages[i]);
+		offset = (ssize_t)completed - (ssize_t)address;
+		if (offset > 0 && offset <= PAGE_SIZE)
+			return (i << PAGE_SHIFT) + offset;
+	}
+
+	return 0;
+}
+
 struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
 		int type, int channel, int speed, size_t header_size,
 		fw_iso_callback_t callback, void *callback_data)
@@ -134,7 +151,7 @@ struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
 	ctx->channel = channel;
 	ctx->speed = speed;
 	ctx->header_size = header_size;
-	ctx->callback = callback;
+	ctx->callback.sc = callback;
 	ctx->callback_data = callback_data;
 
 	return ctx;
@@ -143,9 +160,7 @@ EXPORT_SYMBOL(fw_iso_context_create);
 
 void fw_iso_context_destroy(struct fw_iso_context *ctx)
 {
-	struct fw_card *card = ctx->card;
-
-	card->driver->free_iso_context(ctx);
+	ctx->card->driver->free_iso_context(ctx);
 }
 EXPORT_SYMBOL(fw_iso_context_destroy);
 
@@ -156,14 +171,17 @@ int fw_iso_context_start(struct fw_iso_context *ctx,
 }
 EXPORT_SYMBOL(fw_iso_context_start);
 
+int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels)
+{
+	return ctx->card->driver->set_iso_channels(ctx, channels);
+}
+
 int fw_iso_context_queue(struct fw_iso_context *ctx,
 			 struct fw_iso_packet *packet,
 			 struct fw_iso_buffer *buffer,
 			 unsigned long payload)
 {
-	struct fw_card *card = ctx->card;
-
-	return card->driver->queue_iso(ctx, packet, buffer, payload);
+	return ctx->card->driver->queue_iso(ctx, packet, buffer, payload);
 }
 EXPORT_SYMBOL(fw_iso_context_queue);
 
@@ -279,7 +297,7 @@ static void deallocate_channel(struct fw_card *card, int irm_id,
 }
 
 /**
- * fw_iso_resource_manage - Allocate or deallocate a channel and/or bandwidth
+ * fw_iso_resource_manage() - Allocate or deallocate a channel and/or bandwidth
  *
  * In parameters: card, generation, channels_mask, bandwidth, allocate
  * Out parameters: channel, bandwidth
diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
index 93ec64cdeef..09be1a63550 100644
--- a/drivers/firewire/core-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -174,12 +174,7 @@ static inline struct fw_node *fw_node(struct list_head *l)
 	return list_entry(l, struct fw_node, link);
 }
 
-/**
- * build_tree - Build the tree representation of the topology
- * @self_ids: array of self IDs to create the tree from
- * @self_id_count: the length of the self_ids array
- * @local_id: the node ID of the local node
- *
+/*
  * This function builds the tree representation of the topology given
  * by the self IDs from the latest bus reset.  During the construction
  * of the tree, the function checks that the self IDs are valid and
@@ -420,11 +415,10 @@ static void move_tree(struct fw_node *node0, struct fw_node *node1, int port)
 	}
 }
 
-/**
- * update_tree - compare the old topology tree for card with the new
- * one specified by root.  Queue the nodes and mark them as either
- * found, lost or updated.  Update the nodes in the card topology tree
- * as we go.
+/*
+ * Compare the old topology tree for card with the new one specified by root.
+ * Queue the nodes and mark them as either found, lost or updated.
+ * Update the nodes in the card topology tree as we go.
  */
 static void update_tree(struct fw_card *card, struct fw_node *root)
 {
@@ -524,7 +518,7 @@ static void update_topology_map(struct fw_card *card,
 }
 
 void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation,
-			      int self_id_count, u32 *self_ids)
+			      int self_id_count, u32 *self_ids, bool bm_abdicate)
 {
 	struct fw_node *local_node;
 	unsigned long flags;
@@ -543,7 +537,7 @@ void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation,
 
 	spin_lock_irqsave(&card->lock, flags);
 
-	card->broadcast_channel_allocated = false;
+	card->broadcast_channel_allocated = card->broadcast_channel_auto_allocated;
 	card->node_id = node_id;
 	/*
 	 * Update node_id before generation to prevent anybody from using
@@ -552,6 +546,8 @@ void fw_core_handle_bus_reset(struct fw_card *card, int node_id, int generation,
 	smp_wmb();
 	card->generation = generation;
 	card->reset_jiffies = jiffies;
+	card->bm_node_id  = 0xffff;
+	card->bm_abdicate = bm_abdicate;
 	fw_schedule_bm_work(card, 0);
 
 	local_node = build_tree(card, self_ids, self_id_count);
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index fdc33ff06dc..ca7ca56661e 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -246,7 +246,7 @@ static void fw_fill_request(struct fw_packet *packet, int tcode, int tlabel,
 		break;
 
 	default:
-		WARN(1, KERN_ERR "wrong tcode %d", tcode);
+		WARN(1, "wrong tcode %d", tcode);
 	}
  common:
 	packet->speed = speed;
@@ -273,43 +273,52 @@ static int allocate_tlabel(struct fw_card *card)
 }
 
 /**
- * This function provides low-level access to the IEEE1394 transaction
- * logic.  Most C programs would use either fw_read(), fw_write() or
- * fw_lock() instead - those function are convenience wrappers for
- * this function.  The fw_send_request() function is primarily
- * provided as a flexible, one-stop entry point for languages bindings
- * and protocol bindings.
+ * fw_send_request() - submit a request packet for transmission
+ * @card:		interface to send the request at
+ * @t:			transaction instance to which the request belongs
+ * @tcode:		transaction code
+ * @destination_id:	destination node ID, consisting of bus_ID and phy_ID
+ * @generation:		bus generation in which request and response are valid
+ * @speed:		transmission speed
+ * @offset:		48bit wide offset into destination's address space
+ * @payload:		data payload for the request subaction
+ * @length:		length of the payload, in bytes
+ * @callback:		function to be called when the transaction is completed
+ * @callback_data:	data to be passed to the transaction completion callback
  *
- * FIXME: Document this function further, in particular the possible
- * values for rcode in the callback.  In short, we map ACK_COMPLETE to
- * RCODE_COMPLETE, internal errors set errno and set rcode to
- * RCODE_SEND_ERROR (which is out of range for standard ieee1394
- * rcodes).  All other rcodes are forwarded unchanged.  For all
- * errors, payload is NULL, length is 0.
+ * Submit a request packet into the asynchronous request transmission queue.
+ * Can be called from atomic context.  If you prefer a blocking API, use
+ * fw_run_transaction() in a context that can sleep.
  *
- * Can not expect the callback to be called before the function
- * returns, though this does happen in some cases (ACK_COMPLETE and
- * errors).
+ * In case of lock requests, specify one of the firewire-core specific %TCODE_
+ * constants instead of %TCODE_LOCK_REQUEST in @tcode.
  *
- * The payload is only used for write requests and must not be freed
- * until the callback has been called.
+ * Make sure that the value in @destination_id is not older than the one in
+ * @generation.  Otherwise the request is in danger to be sent to a wrong node.
  *
- * @param card the card from which to send the request
- * @param tcode the tcode for this transaction.  Do not use
- *   TCODE_LOCK_REQUEST directly, instead use TCODE_LOCK_MASK_SWAP
- *   etc. to specify tcode and ext_tcode.
- * @param node_id the destination node ID (bus ID and PHY ID concatenated)
- * @param generation the generation for which node_id is valid
- * @param speed the speed to use for sending the request
- * @param offset the 48 bit offset on the destination node
- * @param payload the data payload for the request subaction
- * @param length the length in bytes of the data to read
- * @param callback function to be called when the transaction is completed
- * @param callback_data pointer to arbitrary data, which will be
- *   passed to the callback
- *
- * In case of asynchronous stream packets i.e. TCODE_STREAM_DATA, the caller
+ * In case of asynchronous stream packets i.e. %TCODE_STREAM_DATA, the caller
  * needs to synthesize @destination_id with fw_stream_packet_destination_id().
+ * It will contain tag, channel, and sy data instead of a node ID then.
+ *
+ * The payload buffer at @data is going to be DMA-mapped except in case of
+ * quadlet-sized payload or of local (loopback) requests.  Hence make sure that
+ * the buffer complies with the restrictions for DMA-mapped memory.  The
+ * @payload must not be freed before the @callback is called.
+ *
+ * In case of request types without payload, @data is NULL and @length is 0.
+ *
+ * After the transaction is completed successfully or unsuccessfully, the
+ * @callback will be called.  Among its parameters is the response code which
+ * is either one of the rcodes per IEEE 1394 or, in case of internal errors,
+ * the firewire-core specific %RCODE_SEND_ERROR.  The other firewire-core
+ * specific rcodes (%RCODE_CANCELLED, %RCODE_BUSY, %RCODE_GENERATION,
+ * %RCODE_NO_ACK) denote transaction timeout, busy responder, stale request
+ * generation, or missing ACK respectively.
+ *
+ * Note some timing corner cases:  fw_send_request() may complete much earlier
+ * than when the request packet actually hits the wire.  On the other hand,
+ * transaction completion and hence execution of @callback may happen even
+ * before fw_send_request() returns.
  */
 void fw_send_request(struct fw_card *card, struct fw_transaction *t, int tcode,
 		     int destination_id, int generation, int speed,
@@ -339,7 +348,8 @@ void fw_send_request(struct fw_card *card, struct fw_transaction *t, int tcode,
 	setup_timer(&t->split_timeout_timer,
 		    split_transaction_timeout_callback, (unsigned long)t);
 	/* FIXME: start this timer later, relative to t->timestamp */
-	mod_timer(&t->split_timeout_timer, jiffies + DIV_ROUND_UP(HZ, 10));
+	mod_timer(&t->split_timeout_timer,
+		  jiffies + card->split_timeout_jiffies);
 	t->callback = callback;
 	t->callback_data = callback_data;
 
@@ -374,9 +384,11 @@ static void transaction_callback(struct fw_card *card, int rcode,
 }
 
 /**
- * fw_run_transaction - send request and sleep until transaction is completed
+ * fw_run_transaction() - send request and sleep until transaction is completed
  *
- * Returns the RCODE.
+ * Returns the RCODE.  See fw_send_request() for parameter documentation.
+ * Unlike fw_send_request(), @data points to the payload of the request or/and
+ * to the payload of the response.
  */
 int fw_run_transaction(struct fw_card *card, int tcode, int destination_id,
 		       int generation, int speed, unsigned long long offset,
@@ -417,9 +429,21 @@ void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count)
 {
 	long timeout = DIV_ROUND_UP(HZ, 10);
-	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
-		   PHY_CONFIG_ROOT_ID(node_id) |
-		   PHY_CONFIG_GAP_COUNT(gap_count);
+	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG);
+
+	if (node_id != FW_PHY_CONFIG_NO_NODE_ID)
+		data |= PHY_CONFIG_ROOT_ID(node_id);
+
+	if (gap_count == FW_PHY_CONFIG_CURRENT_GAP_COUNT) {
+		gap_count = card->driver->read_phy_reg(card, 1);
+		if (gap_count < 0)
+			return;
+
+		gap_count &= 63;
+		if (gap_count == 63)
+			return;
+	}
+	data |= PHY_CONFIG_GAP_COUNT(gap_count);
 
 	mutex_lock(&phy_config_mutex);
 
@@ -494,9 +518,9 @@ static bool is_in_fcp_region(u64 offset, size_t length)
 }
 
 /**
- * fw_core_add_address_handler - register for incoming requests
- * @handler: callback
- * @region: region in the IEEE 1212 node space address range
+ * fw_core_add_address_handler() - register for incoming requests
+ * @handler:	callback
+ * @region:	region in the IEEE 1212 node space address range
  *
  * region->start, ->end, and handler->length have to be quadlet-aligned.
  *
@@ -519,8 +543,8 @@ int fw_core_add_address_handler(struct fw_address_handler *handler,
 	int ret = -EBUSY;
 
 	if (region->start & 0xffff000000000003ULL ||
-	    region->end   & 0xffff000000000003ULL ||
 	    region->start >= region->end ||
+	    region->end   > 0x0001000000000000ULL ||
 	    handler->length & 3 ||
 	    handler->length == 0)
 		return -EINVAL;
@@ -551,7 +575,7 @@ int fw_core_add_address_handler(struct fw_address_handler *handler,
 EXPORT_SYMBOL(fw_core_add_address_handler);
 
 /**
- * fw_core_remove_address_handler - unregister an address handler
+ * fw_core_remove_address_handler() - unregister an address handler
  */
 void fw_core_remove_address_handler(struct fw_address_handler *handler)
 {
@@ -580,6 +604,41 @@ static void free_response_callback(struct fw_packet *packet,
 	kfree(request);
 }
 
+int fw_get_response_length(struct fw_request *r)
+{
+	int tcode, ext_tcode, data_length;
+
+	tcode = HEADER_GET_TCODE(r->request_header[0]);
+
+	switch (tcode) {
+	case TCODE_WRITE_QUADLET_REQUEST:
+	case TCODE_WRITE_BLOCK_REQUEST:
+		return 0;
+
+	case TCODE_READ_QUADLET_REQUEST:
+		return 4;
+
+	case TCODE_READ_BLOCK_REQUEST:
+		data_length = HEADER_GET_DATA_LENGTH(r->request_header[3]);
+		return data_length;
+
+	case TCODE_LOCK_REQUEST:
+		ext_tcode = HEADER_GET_EXTENDED_TCODE(r->request_header[3]);
+		data_length = HEADER_GET_DATA_LENGTH(r->request_header[3]);
+		switch (ext_tcode) {
+		case EXTCODE_FETCH_ADD:
+		case EXTCODE_LITTLE_ADD:
+			return data_length;
+		default:
+			return data_length / 2;
+		}
+
+	default:
+		WARN(1, "wrong tcode %d", tcode);
+		return 0;
+	}
+}
+
 void fw_fill_response(struct fw_packet *response, u32 *request_header,
 		      int rcode, void *payload, size_t length)
 {
@@ -631,18 +690,35 @@ void fw_fill_response(struct fw_packet *response, u32 *request_header,
 		break;
 
 	default:
-		WARN(1, KERN_ERR "wrong tcode %d", tcode);
+		WARN(1, "wrong tcode %d", tcode);
 	}
 
 	response->payload_mapped = false;
 }
 EXPORT_SYMBOL(fw_fill_response);
 
-static struct fw_request *allocate_request(struct fw_packet *p)
+static u32 compute_split_timeout_timestamp(struct fw_card *card,
+					   u32 request_timestamp)
+{
+	unsigned int cycles;
+	u32 timestamp;
+
+	cycles = card->split_timeout_cycles;
+	cycles += request_timestamp & 0x1fff;
+
+	timestamp = request_timestamp & ~0x1fff;
+	timestamp += (cycles / 8000) << 13;
+	timestamp |= cycles % 8000;
+
+	return timestamp;
+}
+
+static struct fw_request *allocate_request(struct fw_card *card,
+					   struct fw_packet *p)
 {
 	struct fw_request *request;
 	u32 *data, length;
-	int request_tcode, t;
+	int request_tcode;
 
 	request_tcode = HEADER_GET_TCODE(p->header[0]);
 	switch (request_tcode) {
@@ -677,14 +753,9 @@ static struct fw_request *allocate_request(struct fw_packet *p)
 	if (request == NULL)
 		return NULL;
 
-	t = (p->timestamp & 0x1fff) + 4000;
-	if (t >= 8000)
-		t = (p->timestamp & ~0x1fff) + 0x2000 + t - 8000;
-	else
-		t = (p->timestamp & ~0x1fff) + t;
-
 	request->response.speed = p->speed;
-	request->response.timestamp = t;
+	request->response.timestamp =
+			compute_split_timeout_timestamp(card, p->timestamp);
 	request->response.generation = p->generation;
 	request->response.ack = 0;
 	request->response.callback = free_response_callback;
@@ -713,7 +784,8 @@ void fw_send_response(struct fw_card *card,
 
 	if (rcode == RCODE_COMPLETE)
 		fw_fill_response(&request->response, request->request_header,
-				 rcode, request->data, request->length);
+				 rcode, request->data,
+				 fw_get_response_length(request));
 	else
 		fw_fill_response(&request->response, request->request_header,
 				 rcode, NULL, 0);
@@ -731,9 +803,11 @@ static void handle_exclusive_region_request(struct fw_card *card,
 	unsigned long flags;
 	int tcode, destination, source;
 
-	tcode       = HEADER_GET_TCODE(p->header[0]);
 	destination = HEADER_GET_DESTINATION(p->header[0]);
 	source      = HEADER_GET_SOURCE(p->header[1]);
+	tcode       = HEADER_GET_TCODE(p->header[0]);
+	if (tcode == TCODE_LOCK_REQUEST)
+		tcode = 0x10 + HEADER_GET_EXTENDED_TCODE(p->header[3]);
 
 	spin_lock_irqsave(&address_handler_lock, flags);
 	handler = lookup_enclosing_address_handler(&address_handler_list,
@@ -753,7 +827,7 @@ static void handle_exclusive_region_request(struct fw_card *card,
 	else
 		handler->address_callback(card, request,
 					  tcode, destination, source,
-					  p->generation, p->speed, offset,
+					  p->generation, offset,
 					  request->data, request->length,
 					  handler->callback_data);
 }
@@ -791,8 +865,8 @@ static void handle_fcp_region_request(struct fw_card *card,
 		if (is_enclosing_handler(handler, offset, request->length))
 			handler->address_callback(card, NULL, tcode,
 						  destination, source,
-						  p->generation, p->speed,
-						  offset, request->data,
+						  p->generation, offset,
+						  request->data,
 						  request->length,
 						  handler->callback_data);
 	}
@@ -809,7 +883,12 @@ void fw_core_handle_request(struct fw_card *card, struct fw_packet *p)
 	if (p->ack != ACK_PENDING && p->ack != ACK_COMPLETE)
 		return;
 
-	request = allocate_request(p);
+	if (TCODE_IS_LINK_INTERNAL(HEADER_GET_TCODE(p->header[0]))) {
+		fw_cdev_handle_phy_packet(card, p);
+		return;
+	}
+
+	request = allocate_request(card, p);
 	if (request == NULL) {
 		/* FIXME: send statically allocated busy packet. */
 		return;
@@ -832,13 +911,12 @@ void fw_core_handle_response(struct fw_card *card, struct fw_packet *p)
 	unsigned long flags;
 	u32 *data;
 	size_t data_length;
-	int tcode, tlabel, destination, source, rcode;
+	int tcode, tlabel, source, rcode;
 
-	tcode       = HEADER_GET_TCODE(p->header[0]);
-	tlabel      = HEADER_GET_TLABEL(p->header[0]);
-	destination = HEADER_GET_DESTINATION(p->header[0]);
-	source      = HEADER_GET_SOURCE(p->header[1]);
-	rcode       = HEADER_GET_RCODE(p->header[1]);
+	tcode	= HEADER_GET_TCODE(p->header[0]);
+	tlabel	= HEADER_GET_TLABEL(p->header[0]);
+	source	= HEADER_GET_SOURCE(p->header[1]);
+	rcode	= HEADER_GET_RCODE(p->header[1]);
 
 	spin_lock_irqsave(&card->lock, flags);
 	list_for_each_entry(t, &card->transaction_list, link) {
@@ -903,8 +981,8 @@ static const struct fw_address_region topology_map_region =
 
 static void handle_topology_map(struct fw_card *card, struct fw_request *request,
 		int tcode, int destination, int source, int generation,
-		int speed, unsigned long long offset,
-		void *payload, size_t length, void *callback_data)
+		unsigned long long offset, void *payload, size_t length,
+		void *callback_data)
 {
 	int start;
 
@@ -933,19 +1011,97 @@ static const struct fw_address_region registers_region =
 	{ .start = CSR_REGISTER_BASE,
 	  .end   = CSR_REGISTER_BASE | CSR_CONFIG_ROM, };
 
+static void update_split_timeout(struct fw_card *card)
+{
+	unsigned int cycles;
+
+	cycles = card->split_timeout_hi * 8000 + (card->split_timeout_lo >> 19);
+
+	cycles = max(cycles, 800u); /* minimum as per the spec */
+	cycles = min(cycles, 3u * 8000u); /* maximum OHCI timeout */
+
+	card->split_timeout_cycles = cycles;
+	card->split_timeout_jiffies = DIV_ROUND_UP(cycles * HZ, 8000);
+}
+
 static void handle_registers(struct fw_card *card, struct fw_request *request,
 		int tcode, int destination, int source, int generation,
-		int speed, unsigned long long offset,
-		void *payload, size_t length, void *callback_data)
+		unsigned long long offset, void *payload, size_t length,
+		void *callback_data)
 {
 	int reg = offset & ~CSR_REGISTER_BASE;
 	__be32 *data = payload;
 	int rcode = RCODE_COMPLETE;
+	unsigned long flags;
 
 	switch (reg) {
+	case CSR_PRIORITY_BUDGET:
+		if (!card->priority_budget_implemented) {
+			rcode = RCODE_ADDRESS_ERROR;
+			break;
+		}
+		/* else fall through */
+
+	case CSR_NODE_IDS:
+		/*
+		 * per IEEE 1394-2008 8.3.22.3, not IEEE 1394.1-2004 3.2.8
+		 * and 9.6, but interoperable with IEEE 1394.1-2004 bridges
+		 */
+		/* fall through */
+
+	case CSR_STATE_CLEAR:
+	case CSR_STATE_SET:
 	case CSR_CYCLE_TIME:
-		if (TCODE_IS_READ_REQUEST(tcode) && length == 4)
-			*data = cpu_to_be32(card->driver->get_cycle_time(card));
+	case CSR_BUS_TIME:
+	case CSR_BUSY_TIMEOUT:
+		if (tcode == TCODE_READ_QUADLET_REQUEST)
+			*data = cpu_to_be32(card->driver->read_csr(card, reg));
+		else if (tcode == TCODE_WRITE_QUADLET_REQUEST)
+			card->driver->write_csr(card, reg, be32_to_cpu(*data));
+		else
+			rcode = RCODE_TYPE_ERROR;
+		break;
+
+	case CSR_RESET_START:
+		if (tcode == TCODE_WRITE_QUADLET_REQUEST)
+			card->driver->write_csr(card, CSR_STATE_CLEAR,
+						CSR_STATE_BIT_ABDICATE);
+		else
+			rcode = RCODE_TYPE_ERROR;
+		break;
+
+	case CSR_SPLIT_TIMEOUT_HI:
+		if (tcode == TCODE_READ_QUADLET_REQUEST) {
+			*data = cpu_to_be32(card->split_timeout_hi);
+		} else if (tcode == TCODE_WRITE_QUADLET_REQUEST) {
+			spin_lock_irqsave(&card->lock, flags);
+			card->split_timeout_hi = be32_to_cpu(*data) & 7;
+			update_split_timeout(card);
+			spin_unlock_irqrestore(&card->lock, flags);
+		} else {
+			rcode = RCODE_TYPE_ERROR;
+		}
+		break;
+
+	case CSR_SPLIT_TIMEOUT_LO:
+		if (tcode == TCODE_READ_QUADLET_REQUEST) {
+			*data = cpu_to_be32(card->split_timeout_lo);
+		} else if (tcode == TCODE_WRITE_QUADLET_REQUEST) {
+			spin_lock_irqsave(&card->lock, flags);
+			card->split_timeout_lo =
+					be32_to_cpu(*data) & 0xfff80000;
+			update_split_timeout(card);
+			spin_unlock_irqrestore(&card->lock, flags);
+		} else {
+			rcode = RCODE_TYPE_ERROR;
+		}
+		break;
+
+	case CSR_MAINT_UTILITY:
+		if (tcode == TCODE_READ_QUADLET_REQUEST)
+			*data = card->maint_utility_register;
+		else if (tcode == TCODE_WRITE_QUADLET_REQUEST)
+			card->maint_utility_register = *data;
 		else
 			rcode = RCODE_TYPE_ERROR;
 		break;
@@ -975,12 +1131,6 @@ static void handle_registers(struct fw_card *card, struct fw_request *request,
 		BUG();
 		break;
 
-	case CSR_BUSY_TIMEOUT:
-		/* FIXME: Implement this. */
-
-	case CSR_BUS_TIME:
-		/* Useless without initialization by the bus manager. */
-
 	default:
 		rcode = RCODE_ADDRESS_ERROR;
 		break;
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 0ecfcd95f4c..e6239f971be 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -38,6 +38,9 @@ struct fw_packet;
 #define BROADCAST_CHANNEL_INITIAL	(1 << 31 | 31)
 #define BROADCAST_CHANNEL_VALID		(1 << 30)
 
+#define CSR_STATE_BIT_CMSTR	(1 << 8)
+#define CSR_STATE_BIT_ABDICATE	(1 << 10)
+
 struct fw_card_driver {
 	/*
 	 * Enable the given card with the given initial config rom.
@@ -48,6 +51,7 @@ struct fw_card_driver {
 	int (*enable)(struct fw_card *card,
 		      const __be32 *config_rom, size_t length);
 
+	int (*read_phy_reg)(struct fw_card *card, int address);
 	int (*update_phy_reg)(struct fw_card *card, int address,
 			      int clear_bits, int set_bits);
 
@@ -75,7 +79,8 @@ struct fw_card_driver {
 	int (*enable_phys_dma)(struct fw_card *card,
 			       int node_id, int generation);
 
-	u32 (*get_cycle_time)(struct fw_card *card);
+	u32 (*read_csr)(struct fw_card *card, int csr_offset);
+	void (*write_csr)(struct fw_card *card, int csr_offset, u32 value);
 
 	struct fw_iso_context *
 	(*allocate_iso_context)(struct fw_card *card,
@@ -85,6 +90,8 @@ struct fw_card_driver {
 	int (*start_iso)(struct fw_iso_context *ctx,
 			 s32 cycle, u32 sync, u32 tags);
 
+	int (*set_iso_channels)(struct fw_iso_context *ctx, u64 *channels);
+
 	int (*queue_iso)(struct fw_iso_context *ctx,
 			 struct fw_iso_packet *packet,
 			 struct fw_iso_buffer *buffer,
@@ -98,8 +105,8 @@ void fw_card_initialize(struct fw_card *card,
 int fw_card_add(struct fw_card *card,
 		u32 max_receive, u32 link_speed, u64 guid);
 void fw_core_remove_card(struct fw_card *card);
-int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
 int fw_compute_block_crc(__be32 *block);
+void fw_schedule_bus_reset(struct fw_card *card, bool delayed, bool short_reset);
 void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
 
 static inline struct fw_card *fw_card_get(struct fw_card *card)
@@ -123,6 +130,7 @@ extern const struct file_operations fw_device_ops;
 
 void fw_device_cdev_update(struct fw_device *device);
 void fw_device_cdev_remove(struct fw_device *device);
+void fw_cdev_handle_phy_packet(struct fw_card *card, struct fw_packet *p);
 
 
 /* -device */
@@ -192,7 +200,7 @@ static inline void fw_node_put(struct fw_node *node)
 }
 
 void fw_core_handle_bus_reset(struct fw_card *card, int node_id,
-			      int generation, int self_id_count, u32 *self_ids);
+	int generation, int self_id_count, u32 *self_ids, bool bm_abdicate);
 void fw_destroy_nodes(struct fw_card *card);
 
 /*
@@ -209,6 +217,7 @@ static inline bool is_next_generation(int new_generation, int old_generation)
 
 #define TCODE_IS_READ_REQUEST(tcode)	(((tcode) & ~1) == 4)
 #define TCODE_IS_BLOCK_PACKET(tcode)	(((tcode) &  1) != 0)
+#define TCODE_IS_LINK_INTERNAL(tcode)	((tcode) == 0xe)
 #define TCODE_IS_REQUEST(tcode)		(((tcode) &  2) == 0)
 #define TCODE_IS_RESPONSE(tcode)	(((tcode) &  2) != 0)
 #define TCODE_HAS_REQUEST_DATA(tcode)	(((tcode) & 12) != 4)
@@ -218,9 +227,18 @@ static inline bool is_next_generation(int new_generation, int old_generation)
 
 void fw_core_handle_request(struct fw_card *card, struct fw_packet *request);
 void fw_core_handle_response(struct fw_card *card, struct fw_packet *packet);
+int fw_get_response_length(struct fw_request *request);
 void fw_fill_response(struct fw_packet *response, u32 *request_header,
 		      int rcode, void *payload, size_t length);
+
+#define FW_PHY_CONFIG_NO_NODE_ID	-1
+#define FW_PHY_CONFIG_CURRENT_GAP_COUNT	-1
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count);
 
+static inline bool is_ping_packet(u32 *data)
+{
+	return (data[0] & 0xc0ffffff) == 0 && ~data[0] == data[1];
+}
+
 #endif /* _FIREWIRE_CORE_H */
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 7142eeec807..da17d409a24 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -806,8 +806,8 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len,
 
 static void fwnet_receive_packet(struct fw_card *card, struct fw_request *r,
 		int tcode, int destination, int source, int generation,
-		int speed, unsigned long long offset, void *payload,
-		size_t length, void *callback_data)
+		unsigned long long offset, void *payload, size_t length,
+		void *callback_data)
 {
 	struct fwnet_device *dev = callback_data;
 	int rcode;
diff --git a/drivers/firewire/nosy-user.h b/drivers/firewire/nosy-user.h
new file mode 100644
index 00000000000..e48aa6200c7
--- /dev/null
+++ b/drivers/firewire/nosy-user.h
@@ -0,0 +1,25 @@
+#ifndef __nosy_user_h
+#define __nosy_user_h
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define NOSY_IOC_GET_STATS _IOR('&', 0, struct nosy_stats)
+#define NOSY_IOC_START     _IO('&', 1)
+#define NOSY_IOC_STOP      _IO('&', 2)
+#define NOSY_IOC_FILTER    _IOW('&', 2, __u32)
+
+struct nosy_stats {
+	__u32 total_packet_count;
+	__u32 lost_packet_count;
+};
+
+/*
+ * Format of packets returned from the kernel driver:
+ *
+ *	quadlet with timestamp		(microseconds, CPU endian)
+ *	quadlet-padded packet data...	(little endian)
+ *	quadlet with ack		(little endian)
+ */
+
+#endif /* __nosy_user_h */
diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
new file mode 100644
index 00000000000..8528b10763e
--- /dev/null
+++ b/drivers/firewire/nosy.c
@@ -0,0 +1,721 @@
+/*
+ * nosy - Snoop mode driver for TI PCILynx 1394 controllers
+ * Copyright (C) 2002-2007 Kristian Høgsberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/sched.h> /* required for linux/wait.h */
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/timex.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+
+#include <asm/atomic.h>
+#include <asm/byteorder.h>
+
+#include "nosy.h"
+#include "nosy-user.h"
+
+#define TCODE_PHY_PACKET		0x10
+#define PCI_DEVICE_ID_TI_PCILYNX	0x8000
+
+static char driver_name[] = KBUILD_MODNAME;
+
+/* this is the physical layout of a PCL, its size is 128 bytes */
+struct pcl {
+	__le32 next;
+	__le32 async_error_next;
+	u32 user_data;
+	__le32 pcl_status;
+	__le32 remaining_transfer_count;
+	__le32 next_data_buffer;
+	struct {
+		__le32 control;
+		__le32 pointer;
+	} buffer[13];
+};
+
+struct packet {
+	unsigned int length;
+	char data[0];
+};
+
+struct packet_buffer {
+	char *data;
+	size_t capacity;
+	long total_packet_count, lost_packet_count;
+	atomic_t size;
+	struct packet *head, *tail;
+	wait_queue_head_t wait;
+};
+
+struct pcilynx {
+	struct pci_dev *pci_device;
+	__iomem char *registers;
+
+	struct pcl *rcv_start_pcl, *rcv_pcl;
+	__le32 *rcv_buffer;
+
+	dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus;
+
+	spinlock_t client_list_lock;
+	struct list_head client_list;
+
+	struct miscdevice misc;
+	struct list_head link;
+	struct kref kref;
+};
+
+static inline struct pcilynx *
+lynx_get(struct pcilynx *lynx)
+{
+	kref_get(&lynx->kref);
+
+	return lynx;
+}
+
+static void
+lynx_release(struct kref *kref)
+{
+	kfree(container_of(kref, struct pcilynx, kref));
+}
+
+static inline void
+lynx_put(struct pcilynx *lynx)
+{
+	kref_put(&lynx->kref, lynx_release);
+}
+
+struct client {
+	struct pcilynx *lynx;
+	u32 tcode_mask;
+	struct packet_buffer buffer;
+	struct list_head link;
+};
+
+static DEFINE_MUTEX(card_mutex);
+static LIST_HEAD(card_list);
+
+static int
+packet_buffer_init(struct packet_buffer *buffer, size_t capacity)
+{
+	buffer->data = kmalloc(capacity, GFP_KERNEL);
+	if (buffer->data == NULL)
+		return -ENOMEM;
+	buffer->head = (struct packet *) buffer->data;
+	buffer->tail = (struct packet *) buffer->data;
+	buffer->capacity = capacity;
+	buffer->lost_packet_count = 0;
+	atomic_set(&buffer->size, 0);
+	init_waitqueue_head(&buffer->wait);
+
+	return 0;
+}
+
+static void
+packet_buffer_destroy(struct packet_buffer *buffer)
+{
+	kfree(buffer->data);
+}
+
+static int
+packet_buffer_get(struct client *client, char __user *data, size_t user_length)
+{
+	struct packet_buffer *buffer = &client->buffer;
+	size_t length;
+	char *end;
+
+	if (wait_event_interruptible(buffer->wait,
+				     atomic_read(&buffer->size) > 0) ||
+				     list_empty(&client->lynx->link))
+		return -ERESTARTSYS;
+
+	if (atomic_read(&buffer->size) == 0)
+		return -ENODEV;
+
+	/* FIXME: Check length <= user_length. */
+
+	end = buffer->data + buffer->capacity;
+	length = buffer->head->length;
+
+	if (&buffer->head->data[length] < end) {
+		if (copy_to_user(data, buffer->head->data, length))
+			return -EFAULT;
+		buffer->head = (struct packet *) &buffer->head->data[length];
+	} else {
+		size_t split = end - buffer->head->data;
+
+		if (copy_to_user(data, buffer->head->data, split))
+			return -EFAULT;
+		if (copy_to_user(data + split, buffer->data, length - split))
+			return -EFAULT;
+		buffer->head = (struct packet *) &buffer->data[length - split];
+	}
+
+	/*
+	 * Decrease buffer->size as the last thing, since this is what
+	 * keeps the interrupt from overwriting the packet we are
+	 * retrieving from the buffer.
+	 */
+	atomic_sub(sizeof(struct packet) + length, &buffer->size);
+
+	return length;
+}
+
+static void
+packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length)
+{
+	char *end;
+
+	buffer->total_packet_count++;
+
+	if (buffer->capacity <
+	    atomic_read(&buffer->size) + sizeof(struct packet) + length) {
+		buffer->lost_packet_count++;
+		return;
+	}
+
+	end = buffer->data + buffer->capacity;
+	buffer->tail->length = length;
+
+	if (&buffer->tail->data[length] < end) {
+		memcpy(buffer->tail->data, data, length);
+		buffer->tail = (struct packet *) &buffer->tail->data[length];
+	} else {
+		size_t split = end - buffer->tail->data;
+
+		memcpy(buffer->tail->data, data, split);
+		memcpy(buffer->data, data + split, length - split);
+		buffer->tail = (struct packet *) &buffer->data[length - split];
+	}
+
+	/* Finally, adjust buffer size and wake up userspace reader. */
+
+	atomic_add(sizeof(struct packet) + length, &buffer->size);
+	wake_up_interruptible(&buffer->wait);
+}
+
+static inline void
+reg_write(struct pcilynx *lynx, int offset, u32 data)
+{
+	writel(data, lynx->registers + offset);
+}
+
+static inline u32
+reg_read(struct pcilynx *lynx, int offset)
+{
+	return readl(lynx->registers + offset);
+}
+
+static inline void
+reg_set_bits(struct pcilynx *lynx, int offset, u32 mask)
+{
+	reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
+}
+
+/*
+ * Maybe the pcl programs could be set up to just append data instead
+ * of using a whole packet.
+ */
+static inline void
+run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus,
+			   int dmachan)
+{
+	reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus);
+	reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
+		  DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
+}
+
+static int
+set_phy_reg(struct pcilynx *lynx, int addr, int val)
+{
+	if (addr > 15) {
+		dev_err(&lynx->pci_device->dev,
+			"PHY register address %d out of range\n", addr);
+		return -1;
+	}
+	if (val > 0xff) {
+		dev_err(&lynx->pci_device->dev,
+			"PHY register value %d out of range\n", val);
+		return -1;
+	}
+	reg_write(lynx, LINK_PHY, LINK_PHY_WRITE |
+		  LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val));
+
+	return 0;
+}
+
+static int
+nosy_open(struct inode *inode, struct file *file)
+{
+	int minor = iminor(inode);
+	struct client *client;
+	struct pcilynx *tmp, *lynx = NULL;
+
+	mutex_lock(&card_mutex);
+	list_for_each_entry(tmp, &card_list, link)
+		if (tmp->misc.minor == minor) {
+			lynx = lynx_get(tmp);
+			break;
+		}
+	mutex_unlock(&card_mutex);
+	if (lynx == NULL)
+		return -ENODEV;
+
+	client = kmalloc(sizeof *client, GFP_KERNEL);
+	if (client == NULL)
+		goto fail;
+
+	client->tcode_mask = ~0;
+	client->lynx = lynx;
+	INIT_LIST_HEAD(&client->link);
+
+	if (packet_buffer_init(&client->buffer, 128 * 1024) < 0)
+		goto fail;
+
+	file->private_data = client;
+
+	return 0;
+fail:
+	kfree(client);
+	lynx_put(lynx);
+
+	return -ENOMEM;
+}
+
+static int
+nosy_release(struct inode *inode, struct file *file)
+{
+	struct client *client = file->private_data;
+	struct pcilynx *lynx = client->lynx;
+
+	spin_lock_irq(&lynx->client_list_lock);
+	list_del_init(&client->link);
+	spin_unlock_irq(&lynx->client_list_lock);
+
+	packet_buffer_destroy(&client->buffer);
+	kfree(client);
+	lynx_put(lynx);
+
+	return 0;
+}
+
+static unsigned int
+nosy_poll(struct file *file, poll_table *pt)
+{
+	struct client *client = file->private_data;
+	unsigned int ret = 0;
+
+	poll_wait(file, &client->buffer.wait, pt);
+
+	if (atomic_read(&client->buffer.size) > 0)
+		ret = POLLIN | POLLRDNORM;
+
+	if (list_empty(&client->lynx->link))
+		ret |= POLLHUP;
+
+	return ret;
+}
+
+static ssize_t
+nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset)
+{
+	struct client *client = file->private_data;
+
+	return packet_buffer_get(client, buffer, count);
+}
+
+static long
+nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct client *client = file->private_data;
+	spinlock_t *client_list_lock = &client->lynx->client_list_lock;
+	struct nosy_stats stats;
+
+	switch (cmd) {
+	case NOSY_IOC_GET_STATS:
+		spin_lock_irq(client_list_lock);
+		stats.total_packet_count = client->buffer.total_packet_count;
+		stats.lost_packet_count  = client->buffer.lost_packet_count;
+		spin_unlock_irq(client_list_lock);
+
+		if (copy_to_user((void __user *) arg, &stats, sizeof stats))
+			return -EFAULT;
+		else
+			return 0;
+
+	case NOSY_IOC_START:
+		spin_lock_irq(client_list_lock);
+		list_add_tail(&client->link, &client->lynx->client_list);
+		spin_unlock_irq(client_list_lock);
+
+		return 0;
+
+	case NOSY_IOC_STOP:
+		spin_lock_irq(client_list_lock);
+		list_del_init(&client->link);
+		spin_unlock_irq(client_list_lock);
+
+		return 0;
+
+	case NOSY_IOC_FILTER:
+		spin_lock_irq(client_list_lock);
+		client->tcode_mask = arg;
+		spin_unlock_irq(client_list_lock);
+
+		return 0;
+
+	default:
+		return -EINVAL;
+		/* Flush buffer, configure filter. */
+	}
+}
+
+static const struct file_operations nosy_ops = {
+	.owner =		THIS_MODULE,
+	.read =			nosy_read,
+	.unlocked_ioctl =	nosy_ioctl,
+	.poll =			nosy_poll,
+	.open =			nosy_open,
+	.release =		nosy_release,
+};
+
+#define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */
+
+static void
+packet_irq_handler(struct pcilynx *lynx)
+{
+	struct client *client;
+	u32 tcode_mask, tcode;
+	size_t length;
+	struct timeval tv;
+
+	/* FIXME: Also report rcv_speed. */
+
+	length = __le32_to_cpu(lynx->rcv_pcl->pcl_status) & 0x00001fff;
+	tcode  = __le32_to_cpu(lynx->rcv_buffer[1]) >> 4 & 0xf;
+
+	do_gettimeofday(&tv);
+	lynx->rcv_buffer[0] = (__force __le32)tv.tv_usec;
+
+	if (length == PHY_PACKET_SIZE)
+		tcode_mask = 1 << TCODE_PHY_PACKET;
+	else
+		tcode_mask = 1 << tcode;
+
+	spin_lock(&lynx->client_list_lock);
+
+	list_for_each_entry(client, &lynx->client_list, link)
+		if (client->tcode_mask & tcode_mask)
+			packet_buffer_put(&client->buffer,
+					  lynx->rcv_buffer, length + 4);
+
+	spin_unlock(&lynx->client_list_lock);
+}
+
+static void
+bus_reset_irq_handler(struct pcilynx *lynx)
+{
+	struct client *client;
+	struct timeval tv;
+
+	do_gettimeofday(&tv);
+
+	spin_lock(&lynx->client_list_lock);
+
+	list_for_each_entry(client, &lynx->client_list, link)
+		packet_buffer_put(&client->buffer, &tv.tv_usec, 4);
+
+	spin_unlock(&lynx->client_list_lock);
+}
+
+static irqreturn_t
+irq_handler(int irq, void *device)
+{
+	struct pcilynx *lynx = device;
+	u32 pci_int_status;
+
+	pci_int_status = reg_read(lynx, PCI_INT_STATUS);
+
+	if (pci_int_status == ~0)
+		/* Card was ejected. */
+		return IRQ_NONE;
+
+	if ((pci_int_status & PCI_INT_INT_PEND) == 0)
+		/* Not our interrupt, bail out quickly. */
+		return IRQ_NONE;
+
+	if ((pci_int_status & PCI_INT_P1394_INT) != 0) {
+		u32 link_int_status;
+
+		link_int_status = reg_read(lynx, LINK_INT_STATUS);
+		reg_write(lynx, LINK_INT_STATUS, link_int_status);
+
+		if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0)
+			bus_reset_irq_handler(lynx);
+	}
+
+	/* Clear the PCI_INT_STATUS register only after clearing the
+	 * LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will
+	 * be set again immediately. */
+
+	reg_write(lynx, PCI_INT_STATUS, pci_int_status);
+
+	if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) {
+		packet_irq_handler(lynx);
+		run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void
+remove_card(struct pci_dev *dev)
+{
+	struct pcilynx *lynx = pci_get_drvdata(dev);
+	struct client *client;
+
+	mutex_lock(&card_mutex);
+	list_del_init(&lynx->link);
+	misc_deregister(&lynx->misc);
+	mutex_unlock(&card_mutex);
+
+	reg_write(lynx, PCI_INT_ENABLE, 0);
+	free_irq(lynx->pci_device->irq, lynx);
+
+	spin_lock_irq(&lynx->client_list_lock);
+	list_for_each_entry(client, &lynx->client_list, link)
+		wake_up_interruptible(&client->buffer.wait);
+	spin_unlock_irq(&lynx->client_list_lock);
+
+	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
+			    lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+	pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
+			    lynx->rcv_pcl, lynx->rcv_pcl_bus);
+	pci_free_consistent(lynx->pci_device, PAGE_SIZE,
+			    lynx->rcv_buffer, lynx->rcv_buffer_bus);
+
+	iounmap(lynx->registers);
+	pci_disable_device(dev);
+	lynx_put(lynx);
+}
+
+#define RCV_BUFFER_SIZE (16 * 1024)
+
+static int __devinit
+add_card(struct pci_dev *dev, const struct pci_device_id *unused)
+{
+	struct pcilynx *lynx;
+	u32 p, end;
+	int ret, i;
+
+	if (pci_set_dma_mask(dev, 0xffffffff)) {
+		dev_err(&dev->dev,
+		    "DMA address limits not supported for PCILynx hardware\n");
+		return -ENXIO;
+	}
+	if (pci_enable_device(dev)) {
+		dev_err(&dev->dev, "Failed to enable PCILynx hardware\n");
+		return -ENXIO;
+	}
+	pci_set_master(dev);
+
+	lynx = kzalloc(sizeof *lynx, GFP_KERNEL);
+	if (lynx == NULL) {
+		dev_err(&dev->dev, "Failed to allocate control structure\n");
+		ret = -ENOMEM;
+		goto fail_disable;
+	}
+	lynx->pci_device = dev;
+	pci_set_drvdata(dev, lynx);
+
+	spin_lock_init(&lynx->client_list_lock);
+	INIT_LIST_HEAD(&lynx->client_list);
+	kref_init(&lynx->kref);
+
+	lynx->registers = ioremap_nocache(pci_resource_start(dev, 0),
+					  PCILYNX_MAX_REGISTER);
+
+	lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
+				sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
+	lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
+				sizeof(struct pcl), &lynx->rcv_pcl_bus);
+	lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
+				RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
+	if (lynx->rcv_start_pcl == NULL ||
+	    lynx->rcv_pcl == NULL ||
+	    lynx->rcv_buffer == NULL) {
+		dev_err(&dev->dev, "Failed to allocate receive buffer\n");
+		ret = -ENOMEM;
+		goto fail_deallocate;
+	}
+	lynx->rcv_start_pcl->next	= cpu_to_le32(lynx->rcv_pcl_bus);
+	lynx->rcv_pcl->next		= cpu_to_le32(PCL_NEXT_INVALID);
+	lynx->rcv_pcl->async_error_next	= cpu_to_le32(PCL_NEXT_INVALID);
+
+	lynx->rcv_pcl->buffer[0].control =
+			cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2044);
+	lynx->rcv_pcl->buffer[0].pointer =
+			cpu_to_le32(lynx->rcv_buffer_bus + 4);
+	p = lynx->rcv_buffer_bus + 2048;
+	end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE;
+	for (i = 1; p < end; i++, p += 2048) {
+		lynx->rcv_pcl->buffer[i].control =
+			cpu_to_le32(PCL_CMD_RCV | PCL_BIGENDIAN | 2048);
+		lynx->rcv_pcl->buffer[i].pointer = cpu_to_le32(p);
+	}
+	lynx->rcv_pcl->buffer[i - 1].control |= cpu_to_le32(PCL_LAST_BUFF);
+
+	reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
+	/* Fix buggy cards with autoboot pin not tied low: */
+	reg_write(lynx, DMA0_CHAN_CTRL, 0);
+	reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24);
+
+#if 0
+	/* now, looking for PHY register set */
+	if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
+		lynx->phyic.reg_1394a = 1;
+		PRINT(KERN_INFO, lynx->id,
+		      "found 1394a conform PHY (using extended register set)");
+		lynx->phyic.vendor = get_phy_vendorid(lynx);
+		lynx->phyic.product = get_phy_productid(lynx);
+	} else {
+		lynx->phyic.reg_1394a = 0;
+		PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
+	}
+#endif
+
+	/* Setup the general receive FIFO max size. */
+	reg_write(lynx, FIFO_SIZES, 255);
+
+	reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
+
+	reg_write(lynx, LINK_INT_ENABLE,
+		  LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD |
+		  LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK |
+		  LINK_INT_AT_STUCK | LINK_INT_SNTRJ |
+		  LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW |
+		  LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW);
+
+	/* Disable the L flag in self ID packets. */
+	set_phy_reg(lynx, 4, 0);
+
+	/* Put this baby into snoop mode */
+	reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE);
+
+	run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
+
+	if (request_irq(dev->irq, irq_handler, IRQF_SHARED,
+			driver_name, lynx)) {
+		dev_err(&dev->dev,
+			"Failed to allocate shared interrupt %d\n", dev->irq);
+		ret = -EIO;
+		goto fail_deallocate;
+	}
+
+	lynx->misc.parent = &dev->dev;
+	lynx->misc.minor = MISC_DYNAMIC_MINOR;
+	lynx->misc.name = "nosy";
+	lynx->misc.fops = &nosy_ops;
+
+	mutex_lock(&card_mutex);
+	ret = misc_register(&lynx->misc);
+	if (ret) {
+		dev_err(&dev->dev, "Failed to register misc char device\n");
+		mutex_unlock(&card_mutex);
+		goto fail_free_irq;
+	}
+	list_add_tail(&lynx->link, &card_list);
+	mutex_unlock(&card_mutex);
+
+	dev_info(&dev->dev,
+		 "Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq);
+
+	return 0;
+
+fail_free_irq:
+	reg_write(lynx, PCI_INT_ENABLE, 0);
+	free_irq(lynx->pci_device->irq, lynx);
+
+fail_deallocate:
+	if (lynx->rcv_start_pcl)
+		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
+				lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
+	if (lynx->rcv_pcl)
+		pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
+				lynx->rcv_pcl, lynx->rcv_pcl_bus);
+	if (lynx->rcv_buffer)
+		pci_free_consistent(lynx->pci_device, PAGE_SIZE,
+				lynx->rcv_buffer, lynx->rcv_buffer_bus);
+	iounmap(lynx->registers);
+	kfree(lynx);
+
+fail_disable:
+	pci_disable_device(dev);
+
+	return ret;
+}
+
+static struct pci_device_id pci_table[] __devinitdata = {
+	{
+		.vendor =    PCI_VENDOR_ID_TI,
+		.device =    PCI_DEVICE_ID_TI_PCILYNX,
+		.subvendor = PCI_ANY_ID,
+		.subdevice = PCI_ANY_ID,
+	},
+	{ }	/* Terminating entry */
+};
+
+static struct pci_driver lynx_pci_driver = {
+	.name =		driver_name,
+	.id_table =	pci_table,
+	.probe =	add_card,
+	.remove =	remove_card,
+};
+
+MODULE_AUTHOR("Kristian Hoegsberg");
+MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pci_table);
+
+static int __init nosy_init(void)
+{
+	return pci_register_driver(&lynx_pci_driver);
+}
+
+static void __exit nosy_cleanup(void)
+{
+	pci_unregister_driver(&lynx_pci_driver);
+
+	pr_info("Unloaded %s\n", driver_name);
+}
+
+module_init(nosy_init);
+module_exit(nosy_cleanup);
diff --git a/drivers/firewire/nosy.h b/drivers/firewire/nosy.h
new file mode 100644
index 00000000000..078ff27f475
--- /dev/null
+++ b/drivers/firewire/nosy.h
@@ -0,0 +1,237 @@
+/*
+ * Chip register definitions for PCILynx chipset.  Based on pcilynx.h
+ * from the Linux 1394 drivers, but modified a bit so the names here
+ * match the specification exactly (even though they have weird names,
+ * like xxx_OVER_FLOW, or arbitrary abbreviations like SNTRJ for "sent
+ * reject" etc.)
+ */
+
+#define PCILYNX_MAX_REGISTER     0xfff
+#define PCILYNX_MAX_MEMORY       0xffff
+
+#define PCI_LATENCY_CACHELINE             0x0c
+
+#define MISC_CONTROL                      0x40
+#define MISC_CONTROL_SWRESET              (1<<0)
+
+#define SERIAL_EEPROM_CONTROL             0x44
+
+#define PCI_INT_STATUS                    0x48
+#define PCI_INT_ENABLE                    0x4c
+/* status and enable have identical bit numbers */
+#define PCI_INT_INT_PEND                  (1<<31)
+#define PCI_INT_FRC_INT                   (1<<30)
+#define PCI_INT_SLV_ADR_PERR              (1<<28)
+#define PCI_INT_SLV_DAT_PERR              (1<<27)
+#define PCI_INT_MST_DAT_PERR              (1<<26)
+#define PCI_INT_MST_DEV_TO                (1<<25)
+#define PCI_INT_INT_SLV_TO                (1<<23)
+#define PCI_INT_AUX_TO                    (1<<18)
+#define PCI_INT_AUX_INT                   (1<<17)
+#define PCI_INT_P1394_INT                 (1<<16)
+#define PCI_INT_DMA4_PCL                  (1<<9)
+#define PCI_INT_DMA4_HLT                  (1<<8)
+#define PCI_INT_DMA3_PCL                  (1<<7)
+#define PCI_INT_DMA3_HLT                  (1<<6)
+#define PCI_INT_DMA2_PCL                  (1<<5)
+#define PCI_INT_DMA2_HLT                  (1<<4)
+#define PCI_INT_DMA1_PCL                  (1<<3)
+#define PCI_INT_DMA1_HLT                  (1<<2)
+#define PCI_INT_DMA0_PCL                  (1<<1)
+#define PCI_INT_DMA0_HLT                  (1<<0)
+/* all DMA interrupts combined: */
+#define PCI_INT_DMA_ALL                   0x3ff
+
+#define PCI_INT_DMA_HLT(chan)             (1 << (chan * 2))
+#define PCI_INT_DMA_PCL(chan)             (1 << (chan * 2 + 1))
+
+#define LBUS_ADDR                         0xb4
+#define LBUS_ADDR_SEL_RAM                 (0x0<<16)
+#define LBUS_ADDR_SEL_ROM                 (0x1<<16)
+#define LBUS_ADDR_SEL_AUX                 (0x2<<16)
+#define LBUS_ADDR_SEL_ZV                  (0x3<<16)
+
+#define GPIO_CTRL_A                       0xb8
+#define GPIO_CTRL_B                       0xbc
+#define GPIO_DATA_BASE                    0xc0
+
+#define DMA_BREG(base, chan)              (base + chan * 0x20)
+#define DMA_SREG(base, chan)              (base + chan * 0x10)
+
+#define PCL_NEXT_INVALID (1<<0)
+
+/* transfer commands */
+#define PCL_CMD_RCV            (0x1<<24)
+#define PCL_CMD_RCV_AND_UPDATE (0xa<<24)
+#define PCL_CMD_XMT            (0x2<<24)
+#define PCL_CMD_UNFXMT         (0xc<<24)
+#define PCL_CMD_PCI_TO_LBUS    (0x8<<24)
+#define PCL_CMD_LBUS_TO_PCI    (0x9<<24)
+
+/* aux commands */
+#define PCL_CMD_NOP            (0x0<<24)
+#define PCL_CMD_LOAD           (0x3<<24)
+#define PCL_CMD_STOREQ         (0x4<<24)
+#define PCL_CMD_STORED         (0xb<<24)
+#define PCL_CMD_STORE0         (0x5<<24)
+#define PCL_CMD_STORE1         (0x6<<24)
+#define PCL_CMD_COMPARE        (0xe<<24)
+#define PCL_CMD_SWAP_COMPARE   (0xf<<24)
+#define PCL_CMD_ADD            (0xd<<24)
+#define PCL_CMD_BRANCH         (0x7<<24)
+
+/* BRANCH condition codes */
+#define PCL_COND_DMARDY_SET    (0x1<<20)
+#define PCL_COND_DMARDY_CLEAR  (0x2<<20)
+
+#define PCL_GEN_INTR           (1<<19)
+#define PCL_LAST_BUFF          (1<<18)
+#define PCL_LAST_CMD           (PCL_LAST_BUFF)
+#define PCL_WAITSTAT           (1<<17)
+#define PCL_BIGENDIAN          (1<<16)
+#define PCL_ISOMODE            (1<<12)
+
+#define DMA0_PREV_PCL                     0x100
+#define DMA1_PREV_PCL                     0x120
+#define DMA2_PREV_PCL                     0x140
+#define DMA3_PREV_PCL                     0x160
+#define DMA4_PREV_PCL                     0x180
+#define DMA_PREV_PCL(chan)                (DMA_BREG(DMA0_PREV_PCL, chan))
+
+#define DMA0_CURRENT_PCL                  0x104
+#define DMA1_CURRENT_PCL                  0x124
+#define DMA2_CURRENT_PCL                  0x144
+#define DMA3_CURRENT_PCL                  0x164
+#define DMA4_CURRENT_PCL                  0x184
+#define DMA_CURRENT_PCL(chan)             (DMA_BREG(DMA0_CURRENT_PCL, chan))
+
+#define DMA0_CHAN_STAT                    0x10c
+#define DMA1_CHAN_STAT                    0x12c
+#define DMA2_CHAN_STAT                    0x14c
+#define DMA3_CHAN_STAT                    0x16c
+#define DMA4_CHAN_STAT                    0x18c
+#define DMA_CHAN_STAT(chan)               (DMA_BREG(DMA0_CHAN_STAT, chan))
+/* CHAN_STATUS registers share bits */
+#define DMA_CHAN_STAT_SELFID              (1<<31)
+#define DMA_CHAN_STAT_ISOPKT              (1<<30)
+#define DMA_CHAN_STAT_PCIERR              (1<<29)
+#define DMA_CHAN_STAT_PKTERR              (1<<28)
+#define DMA_CHAN_STAT_PKTCMPL             (1<<27)
+#define DMA_CHAN_STAT_SPECIALACK          (1<<14)
+
+#define DMA0_CHAN_CTRL                    0x110
+#define DMA1_CHAN_CTRL                    0x130
+#define DMA2_CHAN_CTRL                    0x150
+#define DMA3_CHAN_CTRL                    0x170
+#define DMA4_CHAN_CTRL                    0x190
+#define DMA_CHAN_CTRL(chan)               (DMA_BREG(DMA0_CHAN_CTRL, chan))
+/* CHAN_CTRL registers share bits */
+#define DMA_CHAN_CTRL_ENABLE              (1<<31)
+#define DMA_CHAN_CTRL_BUSY                (1<<30)
+#define DMA_CHAN_CTRL_LINK                (1<<29)
+
+#define DMA0_READY                        0x114
+#define DMA1_READY                        0x134
+#define DMA2_READY                        0x154
+#define DMA3_READY                        0x174
+#define DMA4_READY                        0x194
+#define DMA_READY(chan)                   (DMA_BREG(DMA0_READY, chan))
+
+#define DMA_GLOBAL_REGISTER               0x908
+
+#define FIFO_SIZES                        0xa00
+
+#define FIFO_CONTROL                      0xa10
+#define FIFO_CONTROL_GRF_FLUSH            (1<<4)
+#define FIFO_CONTROL_ITF_FLUSH            (1<<3)
+#define FIFO_CONTROL_ATF_FLUSH            (1<<2)
+
+#define FIFO_XMIT_THRESHOLD               0xa14
+
+#define DMA0_WORD0_CMP_VALUE              0xb00
+#define DMA1_WORD0_CMP_VALUE              0xb10
+#define DMA2_WORD0_CMP_VALUE              0xb20
+#define DMA3_WORD0_CMP_VALUE              0xb30
+#define DMA4_WORD0_CMP_VALUE              0xb40
+#define DMA_WORD0_CMP_VALUE(chan)	(DMA_SREG(DMA0_WORD0_CMP_VALUE, chan))
+
+#define DMA0_WORD0_CMP_ENABLE             0xb04
+#define DMA1_WORD0_CMP_ENABLE             0xb14
+#define DMA2_WORD0_CMP_ENABLE             0xb24
+#define DMA3_WORD0_CMP_ENABLE             0xb34
+#define DMA4_WORD0_CMP_ENABLE             0xb44
+#define DMA_WORD0_CMP_ENABLE(chan)	(DMA_SREG(DMA0_WORD0_CMP_ENABLE, chan))
+
+#define DMA0_WORD1_CMP_VALUE              0xb08
+#define DMA1_WORD1_CMP_VALUE              0xb18
+#define DMA2_WORD1_CMP_VALUE              0xb28
+#define DMA3_WORD1_CMP_VALUE              0xb38
+#define DMA4_WORD1_CMP_VALUE              0xb48
+#define DMA_WORD1_CMP_VALUE(chan)	(DMA_SREG(DMA0_WORD1_CMP_VALUE, chan))
+
+#define DMA0_WORD1_CMP_ENABLE             0xb0c
+#define DMA1_WORD1_CMP_ENABLE             0xb1c
+#define DMA2_WORD1_CMP_ENABLE             0xb2c
+#define DMA3_WORD1_CMP_ENABLE             0xb3c
+#define DMA4_WORD1_CMP_ENABLE             0xb4c
+#define DMA_WORD1_CMP_ENABLE(chan)	(DMA_SREG(DMA0_WORD1_CMP_ENABLE, chan))
+/* word 1 compare enable flags */
+#define DMA_WORD1_CMP_MATCH_OTHERBUS      (1<<15)
+#define DMA_WORD1_CMP_MATCH_BROADCAST     (1<<14)
+#define DMA_WORD1_CMP_MATCH_BUS_BCAST     (1<<13)
+#define DMA_WORD1_CMP_MATCH_LOCAL_NODE    (1<<12)
+#define DMA_WORD1_CMP_MATCH_EXACT         (1<<11)
+#define DMA_WORD1_CMP_ENABLE_SELF_ID      (1<<10)
+#define DMA_WORD1_CMP_ENABLE_MASTER       (1<<8)
+
+#define LINK_ID                           0xf00
+#define LINK_ID_BUS(id)                   (id<<22)
+#define LINK_ID_NODE(id)                  (id<<16)
+
+#define LINK_CONTROL                      0xf04
+#define LINK_CONTROL_BUSY                 (1<<29)
+#define LINK_CONTROL_TX_ISO_EN            (1<<26)
+#define LINK_CONTROL_RX_ISO_EN            (1<<25)
+#define LINK_CONTROL_TX_ASYNC_EN          (1<<24)
+#define LINK_CONTROL_RX_ASYNC_EN          (1<<23)
+#define LINK_CONTROL_RESET_TX             (1<<21)
+#define LINK_CONTROL_RESET_RX             (1<<20)
+#define LINK_CONTROL_CYCMASTER            (1<<11)
+#define LINK_CONTROL_CYCSOURCE            (1<<10)
+#define LINK_CONTROL_CYCTIMEREN           (1<<9)
+#define LINK_CONTROL_RCV_CMP_VALID        (1<<7)
+#define LINK_CONTROL_SNOOP_ENABLE         (1<<6)
+
+#define CYCLE_TIMER                       0xf08
+
+#define LINK_PHY                          0xf0c
+#define LINK_PHY_READ                     (1<<31)
+#define LINK_PHY_WRITE                    (1<<30)
+#define LINK_PHY_ADDR(addr)               (addr<<24)
+#define LINK_PHY_WDATA(data)              (data<<16)
+#define LINK_PHY_RADDR(addr)              (addr<<8)
+
+#define LINK_INT_STATUS                   0xf14
+#define LINK_INT_ENABLE                   0xf18
+/* status and enable have identical bit numbers */
+#define LINK_INT_LINK_INT                 (1<<31)
+#define LINK_INT_PHY_TIME_OUT             (1<<30)
+#define LINK_INT_PHY_REG_RCVD             (1<<29)
+#define LINK_INT_PHY_BUSRESET             (1<<28)
+#define LINK_INT_TX_RDY                   (1<<26)
+#define LINK_INT_RX_DATA_RDY              (1<<25)
+#define LINK_INT_IT_STUCK                 (1<<20)
+#define LINK_INT_AT_STUCK                 (1<<19)
+#define LINK_INT_SNTRJ                    (1<<17)
+#define LINK_INT_HDR_ERR                  (1<<16)
+#define LINK_INT_TC_ERR                   (1<<15)
+#define LINK_INT_CYC_SEC                  (1<<11)
+#define LINK_INT_CYC_STRT                 (1<<10)
+#define LINK_INT_CYC_DONE                 (1<<9)
+#define LINK_INT_CYC_PEND                 (1<<8)
+#define LINK_INT_CYC_LOST                 (1<<7)
+#define LINK_INT_CYC_ARB_FAILED           (1<<6)
+#define LINK_INT_GRF_OVER_FLOW            (1<<5)
+#define LINK_INT_ITF_UNDER_FLOW           (1<<4)
+#define LINK_INT_ATF_UNDER_FLOW           (1<<3)
+#define LINK_INT_IARB_FAILED              (1<<0)
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 9f627e758cf..7f03540cabe 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -18,6 +18,7 @@
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/bug.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
 #include <linux/device.h>
@@ -32,11 +33,13 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/time.h>
 
 #include <asm/byteorder.h>
 #include <asm/page.h>
@@ -170,6 +173,10 @@ struct fw_ohci {
 	int generation;
 	int request_generation;	/* for timestamping incoming requests */
 	unsigned quirks;
+	unsigned int pri_req_max;
+	u32 bus_time;
+	bool is_root;
+	bool csr_state_setclear_abdicate;
 
 	/*
 	 * Spinlock for accessing fw_ohci data.  Never call out of
@@ -177,16 +184,20 @@ struct fw_ohci {
 	 */
 	spinlock_t lock;
 
+	struct mutex phy_reg_mutex;
+
 	struct ar_context ar_request_ctx;
 	struct ar_context ar_response_ctx;
 	struct context at_request_ctx;
 	struct context at_response_ctx;
 
-	u32 it_context_mask;
+	u32 it_context_mask;     /* unoccupied IT contexts */
 	struct iso_context *it_context_list;
-	u64 ir_context_channels;
-	u32 ir_context_mask;
+	u64 ir_context_channels; /* unoccupied channels */
+	u32 ir_context_mask;     /* unoccupied IR contexts */
 	struct iso_context *ir_context_list;
+	u64 mc_channels; /* channels in use by the multichannel IR context */
+	bool mc_allocated;
 
 	__be32    *config_rom;
 	dma_addr_t config_rom_bus;
@@ -231,12 +242,14 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 
 static char ohci_driver_name[] = KBUILD_MODNAME;
 
+#define PCI_DEVICE_ID_JMICRON_JMB38X_FW	0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22	0x8009
 
 #define QUIRK_CYCLE_TIMER		1
 #define QUIRK_RESET_PACKET		2
 #define QUIRK_BE_HEADERS		4
 #define QUIRK_NO_1394A			8
+#define QUIRK_NO_MSI			16
 
 /* In case of multiple matches in ohci_quirks[], only the first one is used. */
 static const struct {
@@ -247,6 +260,7 @@ static const struct {
 							    QUIRK_NO_1394A},
 	{PCI_VENDOR_ID_TI,	PCI_ANY_ID,	QUIRK_RESET_PACKET},
 	{PCI_VENDOR_ID_AL,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
+	{PCI_VENDOR_ID_JMICRON,	PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
 	{PCI_VENDOR_ID_NEC,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
 	{PCI_VENDOR_ID_VIA,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
 	{PCI_VENDOR_ID_APPLE,	PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
@@ -260,6 +274,7 @@ MODULE_PARM_DESC(quirks, "Chip quirks (default = 0"
 	", reset packet generation = "	__stringify(QUIRK_RESET_PACKET)
 	", AR/selfID endianess = "	__stringify(QUIRK_BE_HEADERS)
 	", no 1394a enhancements = "	__stringify(QUIRK_NO_1394A)
+	", disable MSI = "		__stringify(QUIRK_NO_MSI)
 	")");
 
 #define OHCI_PARAM_DEBUG_AT_AR		1
@@ -288,7 +303,7 @@ static void log_irqs(u32 evt)
 	    !(evt & OHCI1394_busReset))
 		return;
 
-	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
 	    evt & OHCI1394_selfIDComplete	? " selfID"		: "",
 	    evt & OHCI1394_RQPkt		? " AR_req"		: "",
 	    evt & OHCI1394_RSPkt		? " AR_resp"		: "",
@@ -298,6 +313,7 @@ static void log_irqs(u32 evt)
 	    evt & OHCI1394_isochTx		? " IT"			: "",
 	    evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
 	    evt & OHCI1394_cycleTooLong		? " cycleTooLong"	: "",
+	    evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
 	    evt & OHCI1394_cycleInconsistent	? " cycleInconsistent"	: "",
 	    evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
 	    evt & OHCI1394_busReset		? " busReset"		: "",
@@ -305,7 +321,8 @@ static void log_irqs(u32 evt)
 		    OHCI1394_RSPkt | OHCI1394_reqTxComplete |
 		    OHCI1394_respTxComplete | OHCI1394_isochRx |
 		    OHCI1394_isochTx | OHCI1394_postedWriteErr |
-		    OHCI1394_cycleTooLong | OHCI1394_cycleInconsistent |
+		    OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+		    OHCI1394_cycleInconsistent |
 		    OHCI1394_regAccessFail | OHCI1394_busReset)
 						? " ?"			: "");
 }
@@ -470,12 +487,17 @@ static int read_phy_reg(struct fw_ohci *ohci, int addr)
 	int i;
 
 	reg_write(ohci, OHCI1394_PhyControl, OHCI1394_PhyControl_Read(addr));
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 3 + 100; i++) {
 		val = reg_read(ohci, OHCI1394_PhyControl);
 		if (val & OHCI1394_PhyControl_ReadDone)
 			return OHCI1394_PhyControl_ReadData(val);
 
-		msleep(1);
+		/*
+		 * Try a few times without waiting.  Sleeping is necessary
+		 * only when the link/PHY interface is busy.
+		 */
+		if (i >= 3)
+			msleep(1);
 	}
 	fw_error("failed to read phy reg\n");
 
@@ -488,25 +510,23 @@ static int write_phy_reg(const struct fw_ohci *ohci, int addr, u32 val)
 
 	reg_write(ohci, OHCI1394_PhyControl,
 		  OHCI1394_PhyControl_Write(addr, val));
-	for (i = 0; i < 100; i++) {
+	for (i = 0; i < 3 + 100; i++) {
 		val = reg_read(ohci, OHCI1394_PhyControl);
 		if (!(val & OHCI1394_PhyControl_WritePending))
 			return 0;
 
-		msleep(1);
+		if (i >= 3)
+			msleep(1);
 	}
 	fw_error("failed to write phy reg\n");
 
 	return -EBUSY;
 }
 
-static int ohci_update_phy_reg(struct fw_card *card, int addr,
-			       int clear_bits, int set_bits)
+static int update_phy_reg(struct fw_ohci *ohci, int addr,
+			  int clear_bits, int set_bits)
 {
-	struct fw_ohci *ohci = fw_ohci(card);
-	int ret;
-
-	ret = read_phy_reg(ohci, addr);
+	int ret = read_phy_reg(ohci, addr);
 	if (ret < 0)
 		return ret;
 
@@ -524,13 +544,38 @@ static int read_paged_phy_reg(struct fw_ohci *ohci, int page, int addr)
 {
 	int ret;
 
-	ret = ohci_update_phy_reg(&ohci->card, 7, PHY_PAGE_SELECT, page << 5);
+	ret = update_phy_reg(ohci, 7, PHY_PAGE_SELECT, page << 5);
 	if (ret < 0)
 		return ret;
 
 	return read_phy_reg(ohci, addr);
 }
 
+static int ohci_read_phy_reg(struct fw_card *card, int addr)
+{
+	struct fw_ohci *ohci = fw_ohci(card);
+	int ret;
+
+	mutex_lock(&ohci->phy_reg_mutex);
+	ret = read_phy_reg(ohci, addr);
+	mutex_unlock(&ohci->phy_reg_mutex);
+
+	return ret;
+}
+
+static int ohci_update_phy_reg(struct fw_card *card, int addr,
+			       int clear_bits, int set_bits)
+{
+	struct fw_ohci *ohci = fw_ohci(card);
+	int ret;
+
+	mutex_lock(&ohci->phy_reg_mutex);
+	ret = update_phy_reg(ohci, addr, clear_bits, set_bits);
+	mutex_unlock(&ohci->phy_reg_mutex);
+
+	return ret;
+}
+
 static int ar_context_add_page(struct ar_context *ctx)
 {
 	struct device *dev = ctx->ohci->card.device;
@@ -553,6 +598,7 @@ static int ar_context_add_page(struct ar_context *ctx)
 	ab->descriptor.res_count      = cpu_to_le16(PAGE_SIZE - offset);
 	ab->descriptor.branch_address = 0;
 
+	wmb(); /* finish init of new descriptors before branch_address update */
 	ctx->last_buffer->descriptor.branch_address = cpu_to_le32(ab_bus | 1);
 	ctx->last_buffer->next = ab;
 	ctx->last_buffer = ab;
@@ -940,6 +986,8 @@ static void context_append(struct context *ctx,
 	d_bus = desc->buffer_bus + (d - desc->buffer) * sizeof(*d);
 
 	desc->used += (z + extra) * sizeof(*d);
+
+	wmb(); /* finish init of new descriptors before branch_address update */
 	ctx->prev->branch_address = cpu_to_le32(d_bus | z);
 	ctx->prev = find_branch_descriptor(d, z);
 
@@ -1026,6 +1074,9 @@ static int at_context_queue_packet(struct context *ctx,
 		header[1] = cpu_to_le32(packet->header[0]);
 		header[2] = cpu_to_le32(packet->header[1]);
 		d[0].req_count = cpu_to_le16(12);
+
+		if (is_ping_packet(packet->header))
+			d[0].control |= cpu_to_le16(DESCRIPTOR_PING);
 		break;
 
 	case 4:
@@ -1311,6 +1362,78 @@ static void at_context_transmit(struct context *ctx, struct fw_packet *packet)
 
 }
 
+static u32 cycle_timer_ticks(u32 cycle_timer)
+{
+	u32 ticks;
+
+	ticks = cycle_timer & 0xfff;
+	ticks += 3072 * ((cycle_timer >> 12) & 0x1fff);
+	ticks += (3072 * 8000) * (cycle_timer >> 25);
+
+	return ticks;
+}
+
+/*
+ * Some controllers exhibit one or more of the following bugs when updating the
+ * iso cycle timer register:
+ *  - When the lowest six bits are wrapping around to zero, a read that happens
+ *    at the same time will return garbage in the lowest ten bits.
+ *  - When the cycleOffset field wraps around to zero, the cycleCount field is
+ *    not incremented for about 60 ns.
+ *  - Occasionally, the entire register reads zero.
+ *
+ * To catch these, we read the register three times and ensure that the
+ * difference between each two consecutive reads is approximately the same, i.e.
+ * less than twice the other.  Furthermore, any negative difference indicates an
+ * error.  (A PCI read should take at least 20 ticks of the 24.576 MHz timer to
+ * execute, so we have enough precision to compute the ratio of the differences.)
+ */
+static u32 get_cycle_time(struct fw_ohci *ohci)
+{
+	u32 c0, c1, c2;
+	u32 t0, t1, t2;
+	s32 diff01, diff12;
+	int i;
+
+	c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+
+	if (ohci->quirks & QUIRK_CYCLE_TIMER) {
+		i = 0;
+		c1 = c2;
+		c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+		do {
+			c0 = c1;
+			c1 = c2;
+			c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+			t0 = cycle_timer_ticks(c0);
+			t1 = cycle_timer_ticks(c1);
+			t2 = cycle_timer_ticks(c2);
+			diff01 = t1 - t0;
+			diff12 = t2 - t1;
+		} while ((diff01 <= 0 || diff12 <= 0 ||
+			  diff01 / diff12 >= 2 || diff12 / diff01 >= 2)
+			 && i++ < 20);
+	}
+
+	return c2;
+}
+
+/*
+ * This function has to be called at least every 64 seconds.  The bus_time
+ * field stores not only the upper 25 bits of the BUS_TIME register but also
+ * the most significant bit of the cycle timer in bit 6 so that we can detect
+ * changes in this bit.
+ */
+static u32 update_bus_time(struct fw_ohci *ohci)
+{
+	u32 cycle_time_seconds = get_cycle_time(ohci) >> 25;
+
+	if ((ohci->bus_time & 0x40) != (cycle_time_seconds & 0x40))
+		ohci->bus_time += 0x40;
+
+	return ohci->bus_time | cycle_time_seconds;
+}
+
 static void bus_reset_tasklet(unsigned long data)
 {
 	struct fw_ohci *ohci = (struct fw_ohci *)data;
@@ -1319,6 +1442,7 @@ static void bus_reset_tasklet(unsigned long data)
 	unsigned long flags;
 	void *free_rom = NULL;
 	dma_addr_t free_rom_bus = 0;
+	bool is_new_root;
 
 	reg = reg_read(ohci, OHCI1394_NodeID);
 	if (!(reg & OHCI1394_NodeID_idValid)) {
@@ -1332,6 +1456,12 @@ static void bus_reset_tasklet(unsigned long data)
 	ohci->node_id = reg & (OHCI1394_NodeID_busNumber |
 			       OHCI1394_NodeID_nodeNumber);
 
+	is_new_root = (reg & OHCI1394_NodeID_root) != 0;
+	if (!(ohci->is_root && is_new_root))
+		reg_write(ohci, OHCI1394_LinkControlSet,
+			  OHCI1394_LinkControl_cycleMaster);
+	ohci->is_root = is_new_root;
+
 	reg = reg_read(ohci, OHCI1394_SelfIDCount);
 	if (reg & OHCI1394_SelfIDCount_selfIDError) {
 		fw_notify("inconsistent self IDs\n");
@@ -1439,7 +1569,9 @@ static void bus_reset_tasklet(unsigned long data)
 		    self_id_count, ohci->self_id_buffer);
 
 	fw_core_handle_bus_reset(&ohci->card, ohci->node_id, generation,
-				 self_id_count, ohci->self_id_buffer);
+				 self_id_count, ohci->self_id_buffer,
+				 ohci->csr_state_setclear_abdicate);
+	ohci->csr_state_setclear_abdicate = false;
 }
 
 static irqreturn_t irq_handler(int irq, void *data)
@@ -1515,6 +1647,12 @@ static irqreturn_t irq_handler(int irq, void *data)
 			fw_notify("isochronous cycle inconsistent\n");
 	}
 
+	if (event & OHCI1394_cycle64Seconds) {
+		spin_lock(&ohci->lock);
+		update_bus_time(ohci);
+		spin_unlock(&ohci->lock);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -1577,7 +1715,7 @@ static int configure_1394a_enhancements(struct fw_ohci *ohci)
 		clear = PHY_ENABLE_ACCEL | PHY_ENABLE_MULTI;
 		set = 0;
 	}
-	ret = ohci_update_phy_reg(&ohci->card, 5, clear, set);
+	ret = update_phy_reg(ohci, 5, clear, set);
 	if (ret < 0)
 		return ret;
 
@@ -1599,7 +1737,7 @@ static int ohci_enable(struct fw_card *card,
 {
 	struct fw_ohci *ohci = fw_ohci(card);
 	struct pci_dev *dev = to_pci_dev(card->device);
-	u32 lps;
+	u32 lps, seconds, version, irqs;
 	int i, ret;
 
 	if (software_reset(ohci)) {
@@ -1635,17 +1773,34 @@ static int ohci_enable(struct fw_card *card,
 		  OHCI1394_HCControl_noByteSwapData);
 
 	reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
-	reg_write(ohci, OHCI1394_LinkControlClear,
-		  OHCI1394_LinkControl_rcvPhyPkt);
 	reg_write(ohci, OHCI1394_LinkControlSet,
 		  OHCI1394_LinkControl_rcvSelfID |
+		  OHCI1394_LinkControl_rcvPhyPkt |
 		  OHCI1394_LinkControl_cycleTimerEnable |
 		  OHCI1394_LinkControl_cycleMaster);
 
 	reg_write(ohci, OHCI1394_ATRetries,
 		  OHCI1394_MAX_AT_REQ_RETRIES |
 		  (OHCI1394_MAX_AT_RESP_RETRIES << 4) |
-		  (OHCI1394_MAX_PHYS_RESP_RETRIES << 8));
+		  (OHCI1394_MAX_PHYS_RESP_RETRIES << 8) |
+		  (200 << 16));
+
+	seconds = lower_32_bits(get_seconds());
+	reg_write(ohci, OHCI1394_IsochronousCycleTimer, seconds << 25);
+	ohci->bus_time = seconds & ~0x3f;
+
+	version = reg_read(ohci, OHCI1394_Version) & 0x00ff00ff;
+	if (version >= OHCI_VERSION_1_1) {
+		reg_write(ohci, OHCI1394_InitialChannelsAvailableHi,
+			  0xfffffffe);
+		card->broadcast_channel_auto_allocated = true;
+	}
+
+	/* Get implemented bits of the priority arbitration request counter. */
+	reg_write(ohci, OHCI1394_FairnessControl, 0x3f);
+	ohci->pri_req_max = reg_read(ohci, OHCI1394_FairnessControl) & 0x3f;
+	reg_write(ohci, OHCI1394_FairnessControl, 0);
+	card->priority_budget_implemented = ohci->pri_req_max != 0;
 
 	ar_context_run(&ohci->ar_request_ctx);
 	ar_context_run(&ohci->ar_response_ctx);
@@ -1653,16 +1808,6 @@ static int ohci_enable(struct fw_card *card,
 	reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
 	reg_write(ohci, OHCI1394_IntEventClear, ~0);
 	reg_write(ohci, OHCI1394_IntMaskClear, ~0);
-	reg_write(ohci, OHCI1394_IntMaskSet,
-		  OHCI1394_selfIDComplete |
-		  OHCI1394_RQPkt | OHCI1394_RSPkt |
-		  OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
-		  OHCI1394_isochRx | OHCI1394_isochTx |
-		  OHCI1394_postedWriteErr | OHCI1394_cycleTooLong |
-		  OHCI1394_cycleInconsistent | OHCI1394_regAccessFail |
-		  OHCI1394_masterIntEnable);
-	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
-		reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
 
 	ret = configure_1394a_enhancements(ohci);
 	if (ret < 0)
@@ -1719,26 +1864,38 @@ static int ohci_enable(struct fw_card *card,
 
 	reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
 
+	if (!(ohci->quirks & QUIRK_NO_MSI))
+		pci_enable_msi(dev);
 	if (request_irq(dev->irq, irq_handler,
-			IRQF_SHARED, ohci_driver_name, ohci)) {
-		fw_error("Failed to allocate shared interrupt %d.\n",
-			 dev->irq);
+			pci_dev_msi_enabled(dev) ? 0 : IRQF_SHARED,
+			ohci_driver_name, ohci)) {
+		fw_error("Failed to allocate interrupt %d.\n", dev->irq);
+		pci_disable_msi(dev);
 		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
 				  ohci->config_rom, ohci->config_rom_bus);
 		return -EIO;
 	}
 
+	irqs =	OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
+		OHCI1394_RQPkt | OHCI1394_RSPkt |
+		OHCI1394_isochTx | OHCI1394_isochRx |
+		OHCI1394_postedWriteErr |
+		OHCI1394_selfIDComplete |
+		OHCI1394_regAccessFail |
+		OHCI1394_cycle64Seconds |
+		OHCI1394_cycleInconsistent | OHCI1394_cycleTooLong |
+		OHCI1394_masterIntEnable;
+	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
+		irqs |= OHCI1394_busReset;
+	reg_write(ohci, OHCI1394_IntMaskSet, irqs);
+
 	reg_write(ohci, OHCI1394_HCControlSet,
 		  OHCI1394_HCControl_linkEnable |
 		  OHCI1394_HCControl_BIBimageValid);
 	flush_writes(ohci);
 
-	/*
-	 * We are ready to go, initiate bus reset to finish the
-	 * initialization.
-	 */
-
-	fw_core_initiate_bus_reset(&ohci->card, 1);
+	/* We are ready to go, reset bus to finish initialization. */
+	fw_schedule_bus_reset(&ohci->card, false, true);
 
 	return 0;
 }
@@ -1813,7 +1970,7 @@ static int ohci_set_config_rom(struct fw_card *card,
 	 * takes effect.
 	 */
 	if (ret == 0)
-		fw_core_initiate_bus_reset(&ohci->card, 1);
+		fw_schedule_bus_reset(&ohci->card, true, true);
 	else
 		dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
 				  next_config_rom, next_config_rom_bus);
@@ -1903,61 +2060,117 @@ static int ohci_enable_phys_dma(struct fw_card *card,
 #endif /* CONFIG_FIREWIRE_OHCI_REMOTE_DMA */
 }
 
-static u32 cycle_timer_ticks(u32 cycle_timer)
+static u32 ohci_read_csr(struct fw_card *card, int csr_offset)
 {
-	u32 ticks;
+	struct fw_ohci *ohci = fw_ohci(card);
+	unsigned long flags;
+	u32 value;
+
+	switch (csr_offset) {
+	case CSR_STATE_CLEAR:
+	case CSR_STATE_SET:
+		if (ohci->is_root &&
+		    (reg_read(ohci, OHCI1394_LinkControlSet) &
+		     OHCI1394_LinkControl_cycleMaster))
+			value = CSR_STATE_BIT_CMSTR;
+		else
+			value = 0;
+		if (ohci->csr_state_setclear_abdicate)
+			value |= CSR_STATE_BIT_ABDICATE;
 
-	ticks = cycle_timer & 0xfff;
-	ticks += 3072 * ((cycle_timer >> 12) & 0x1fff);
-	ticks += (3072 * 8000) * (cycle_timer >> 25);
+		return value;
 
-	return ticks;
+	case CSR_NODE_IDS:
+		return reg_read(ohci, OHCI1394_NodeID) << 16;
+
+	case CSR_CYCLE_TIME:
+		return get_cycle_time(ohci);
+
+	case CSR_BUS_TIME:
+		/*
+		 * We might be called just after the cycle timer has wrapped
+		 * around but just before the cycle64Seconds handler, so we
+		 * better check here, too, if the bus time needs to be updated.
+		 */
+		spin_lock_irqsave(&ohci->lock, flags);
+		value = update_bus_time(ohci);
+		spin_unlock_irqrestore(&ohci->lock, flags);
+		return value;
+
+	case CSR_BUSY_TIMEOUT:
+		value = reg_read(ohci, OHCI1394_ATRetries);
+		return (value >> 4) & 0x0ffff00f;
+
+	case CSR_PRIORITY_BUDGET:
+		return (reg_read(ohci, OHCI1394_FairnessControl) & 0x3f) |
+			(ohci->pri_req_max << 8);
+
+	default:
+		WARN_ON(1);
+		return 0;
+	}
 }
 
-/*
- * Some controllers exhibit one or more of the following bugs when updating the
- * iso cycle timer register:
- *  - When the lowest six bits are wrapping around to zero, a read that happens
- *    at the same time will return garbage in the lowest ten bits.
- *  - When the cycleOffset field wraps around to zero, the cycleCount field is
- *    not incremented for about 60 ns.
- *  - Occasionally, the entire register reads zero.
- *
- * To catch these, we read the register three times and ensure that the
- * difference between each two consecutive reads is approximately the same, i.e.
- * less than twice the other.  Furthermore, any negative difference indicates an
- * error.  (A PCI read should take at least 20 ticks of the 24.576 MHz timer to
- * execute, so we have enough precision to compute the ratio of the differences.)
- */
-static u32 ohci_get_cycle_time(struct fw_card *card)
+static void ohci_write_csr(struct fw_card *card, int csr_offset, u32 value)
 {
 	struct fw_ohci *ohci = fw_ohci(card);
-	u32 c0, c1, c2;
-	u32 t0, t1, t2;
-	s32 diff01, diff12;
-	int i;
+	unsigned long flags;
 
-	c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
+	switch (csr_offset) {
+	case CSR_STATE_CLEAR:
+		if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
+			reg_write(ohci, OHCI1394_LinkControlClear,
+				  OHCI1394_LinkControl_cycleMaster);
+			flush_writes(ohci);
+		}
+		if (value & CSR_STATE_BIT_ABDICATE)
+			ohci->csr_state_setclear_abdicate = false;
+		break;
 
-	if (ohci->quirks & QUIRK_CYCLE_TIMER) {
-		i = 0;
-		c1 = c2;
-		c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
-		do {
-			c0 = c1;
-			c1 = c2;
-			c2 = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
-			t0 = cycle_timer_ticks(c0);
-			t1 = cycle_timer_ticks(c1);
-			t2 = cycle_timer_ticks(c2);
-			diff01 = t1 - t0;
-			diff12 = t2 - t1;
-		} while ((diff01 <= 0 || diff12 <= 0 ||
-			  diff01 / diff12 >= 2 || diff12 / diff01 >= 2)
-			 && i++ < 20);
-	}
+	case CSR_STATE_SET:
+		if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
+			reg_write(ohci, OHCI1394_LinkControlSet,
+				  OHCI1394_LinkControl_cycleMaster);
+			flush_writes(ohci);
+		}
+		if (value & CSR_STATE_BIT_ABDICATE)
+			ohci->csr_state_setclear_abdicate = true;
+		break;
 
-	return c2;
+	case CSR_NODE_IDS:
+		reg_write(ohci, OHCI1394_NodeID, value >> 16);
+		flush_writes(ohci);
+		break;
+
+	case CSR_CYCLE_TIME:
+		reg_write(ohci, OHCI1394_IsochronousCycleTimer, value);
+		reg_write(ohci, OHCI1394_IntEventSet,
+			  OHCI1394_cycleInconsistent);
+		flush_writes(ohci);
+		break;
+
+	case CSR_BUS_TIME:
+		spin_lock_irqsave(&ohci->lock, flags);
+		ohci->bus_time = (ohci->bus_time & 0x7f) | (value & ~0x7f);
+		spin_unlock_irqrestore(&ohci->lock, flags);
+		break;
+
+	case CSR_BUSY_TIMEOUT:
+		value = (value & 0xf) | ((value & 0xf) << 4) |
+			((value & 0xf) << 8) | ((value & 0x0ffff000) << 4);
+		reg_write(ohci, OHCI1394_ATRetries, value);
+		flush_writes(ohci);
+		break;
+
+	case CSR_PRIORITY_BUDGET:
+		reg_write(ohci, OHCI1394_FairnessControl, value & 0x3f);
+		flush_writes(ohci);
+		break;
+
+	default:
+		WARN_ON(1);
+		break;
+	}
 }
 
 static void copy_iso_headers(struct iso_context *ctx, void *p)
@@ -1992,10 +2205,9 @@ static int handle_ir_packet_per_buffer(struct context *context,
 	__le32 *ir_header;
 	void *p;
 
-	for (pd = d; pd <= last; pd++) {
+	for (pd = d; pd <= last; pd++)
 		if (pd->transfer_status)
 			break;
-	}
 	if (pd > last)
 		/* Descriptor(s) not done yet, stop iteration */
 		return 0;
@@ -2005,16 +2217,38 @@ static int handle_ir_packet_per_buffer(struct context *context,
 
 	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) {
 		ir_header = (__le32 *) p;
-		ctx->base.callback(&ctx->base,
-				   le32_to_cpu(ir_header[0]) & 0xffff,
-				   ctx->header_length, ctx->header,
-				   ctx->base.callback_data);
+		ctx->base.callback.sc(&ctx->base,
+				      le32_to_cpu(ir_header[0]) & 0xffff,
+				      ctx->header_length, ctx->header,
+				      ctx->base.callback_data);
 		ctx->header_length = 0;
 	}
 
 	return 1;
 }
 
+/* d == last because each descriptor block is only a single descriptor. */
+static int handle_ir_buffer_fill(struct context *context,
+				 struct descriptor *d,
+				 struct descriptor *last)
+{
+	struct iso_context *ctx =
+		container_of(context, struct iso_context, context);
+
+	if (!last->transfer_status)
+		/* Descriptor(s) not done yet, stop iteration */
+		return 0;
+
+	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
+		ctx->base.callback.mc(&ctx->base,
+				      le32_to_cpu(last->data_address) +
+				      le16_to_cpu(last->req_count) -
+				      le16_to_cpu(last->res_count),
+				      ctx->base.callback_data);
+
+	return 1;
+}
+
 static int handle_it_packet(struct context *context,
 			    struct descriptor *d,
 			    struct descriptor *last)
@@ -2040,71 +2274,118 @@ static int handle_it_packet(struct context *context,
 		ctx->header_length += 4;
 	}
 	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) {
-		ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count),
-				   ctx->header_length, ctx->header,
-				   ctx->base.callback_data);
+		ctx->base.callback.sc(&ctx->base, le16_to_cpu(last->res_count),
+				      ctx->header_length, ctx->header,
+				      ctx->base.callback_data);
 		ctx->header_length = 0;
 	}
 	return 1;
 }
 
+static void set_multichannel_mask(struct fw_ohci *ohci, u64 channels)
+{
+	u32 hi = channels >> 32, lo = channels;
+
+	reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, ~hi);
+	reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, ~lo);
+	reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet, hi);
+	reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet, lo);
+	mmiowb();
+	ohci->mc_channels = channels;
+}
+
 static struct fw_iso_context *ohci_allocate_iso_context(struct fw_card *card,
 				int type, int channel, size_t header_size)
 {
 	struct fw_ohci *ohci = fw_ohci(card);
-	struct iso_context *ctx, *list;
-	descriptor_callback_t callback;
-	u64 *channels, dont_care = ~0ULL;
-	u32 *mask, regs;
+	struct iso_context *uninitialized_var(ctx);
+	descriptor_callback_t uninitialized_var(callback);
+	u64 *uninitialized_var(channels);
+	u32 *uninitialized_var(mask), uninitialized_var(regs);
 	unsigned long flags;
-	int index, ret = -ENOMEM;
+	int index, ret = -EBUSY;
+
+	spin_lock_irqsave(&ohci->lock, flags);
 
-	if (type == FW_ISO_CONTEXT_TRANSMIT) {
-		channels = &dont_care;
-		mask = &ohci->it_context_mask;
-		list = ohci->it_context_list;
+	switch (type) {
+	case FW_ISO_CONTEXT_TRANSMIT:
+		mask     = &ohci->it_context_mask;
 		callback = handle_it_packet;
-	} else {
+		index    = ffs(*mask) - 1;
+		if (index >= 0) {
+			*mask &= ~(1 << index);
+			regs = OHCI1394_IsoXmitContextBase(index);
+			ctx  = &ohci->it_context_list[index];
+		}
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE:
 		channels = &ohci->ir_context_channels;
-		mask = &ohci->ir_context_mask;
-		list = ohci->ir_context_list;
+		mask     = &ohci->ir_context_mask;
 		callback = handle_ir_packet_per_buffer;
-	}
+		index    = *channels & 1ULL << channel ? ffs(*mask) - 1 : -1;
+		if (index >= 0) {
+			*channels &= ~(1ULL << channel);
+			*mask     &= ~(1 << index);
+			regs = OHCI1394_IsoRcvContextBase(index);
+			ctx  = &ohci->ir_context_list[index];
+		}
+		break;
 
-	spin_lock_irqsave(&ohci->lock, flags);
-	index = *channels & 1ULL << channel ? ffs(*mask) - 1 : -1;
-	if (index >= 0) {
-		*channels &= ~(1ULL << channel);
-		*mask &= ~(1 << index);
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		mask     = &ohci->ir_context_mask;
+		callback = handle_ir_buffer_fill;
+		index    = !ohci->mc_allocated ? ffs(*mask) - 1 : -1;
+		if (index >= 0) {
+			ohci->mc_allocated = true;
+			*mask &= ~(1 << index);
+			regs = OHCI1394_IsoRcvContextBase(index);
+			ctx  = &ohci->ir_context_list[index];
+		}
+		break;
+
+	default:
+		index = -1;
+		ret = -ENOSYS;
 	}
+
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
 	if (index < 0)
-		return ERR_PTR(-EBUSY);
-
-	if (type == FW_ISO_CONTEXT_TRANSMIT)
-		regs = OHCI1394_IsoXmitContextBase(index);
-	else
-		regs = OHCI1394_IsoRcvContextBase(index);
+		return ERR_PTR(ret);
 
-	ctx = &list[index];
 	memset(ctx, 0, sizeof(*ctx));
 	ctx->header_length = 0;
 	ctx->header = (void *) __get_free_page(GFP_KERNEL);
-	if (ctx->header == NULL)
+	if (ctx->header == NULL) {
+		ret = -ENOMEM;
 		goto out;
-
+	}
 	ret = context_init(&ctx->context, ohci, regs, callback);
 	if (ret < 0)
 		goto out_with_header;
 
+	if (type == FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL)
+		set_multichannel_mask(ohci, 0);
+
 	return &ctx->base;
 
  out_with_header:
 	free_page((unsigned long)ctx->header);
  out:
 	spin_lock_irqsave(&ohci->lock, flags);
+
+	switch (type) {
+	case FW_ISO_CONTEXT_RECEIVE:
+		*channels |= 1ULL << channel;
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		ohci->mc_allocated = false;
+		break;
+	}
 	*mask |= 1 << index;
+
 	spin_unlock_irqrestore(&ohci->lock, flags);
 
 	return ERR_PTR(ret);
@@ -2115,10 +2396,11 @@ static int ohci_start_iso(struct fw_iso_context *base,
 {
 	struct iso_context *ctx = container_of(base, struct iso_context, base);
 	struct fw_ohci *ohci = ctx->context.ohci;
-	u32 control, match;
+	u32 control = IR_CONTEXT_ISOCH_HEADER, match;
 	int index;
 
-	if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+	switch (ctx->base.type) {
+	case FW_ISO_CONTEXT_TRANSMIT:
 		index = ctx - ohci->it_context_list;
 		match = 0;
 		if (cycle >= 0)
@@ -2128,9 +2410,13 @@ static int ohci_start_iso(struct fw_iso_context *base,
 		reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 1 << index);
 		reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << index);
 		context_run(&ctx->context, match);
-	} else {
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		control |= IR_CONTEXT_BUFFER_FILL|IR_CONTEXT_MULTI_CHANNEL_MODE;
+		/* fall through */
+	case FW_ISO_CONTEXT_RECEIVE:
 		index = ctx - ohci->ir_context_list;
-		control = IR_CONTEXT_ISOCH_HEADER;
 		match = (tags << 28) | (sync << 8) | ctx->base.channel;
 		if (cycle >= 0) {
 			match |= (cycle & 0x07fff) << 12;
@@ -2141,6 +2427,7 @@ static int ohci_start_iso(struct fw_iso_context *base,
 		reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << index);
 		reg_write(ohci, CONTEXT_MATCH(ctx->context.regs), match);
 		context_run(&ctx->context, control);
+		break;
 	}
 
 	return 0;
@@ -2152,12 +2439,17 @@ static int ohci_stop_iso(struct fw_iso_context *base)
 	struct iso_context *ctx = container_of(base, struct iso_context, base);
 	int index;
 
-	if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+	switch (ctx->base.type) {
+	case FW_ISO_CONTEXT_TRANSMIT:
 		index = ctx - ohci->it_context_list;
 		reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << index);
-	} else {
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE:
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
 		index = ctx - ohci->ir_context_list;
 		reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 1 << index);
+		break;
 	}
 	flush_writes(ohci);
 	context_stop(&ctx->context);
@@ -2178,24 +2470,65 @@ static void ohci_free_iso_context(struct fw_iso_context *base)
 
 	spin_lock_irqsave(&ohci->lock, flags);
 
-	if (ctx->base.type == FW_ISO_CONTEXT_TRANSMIT) {
+	switch (base->type) {
+	case FW_ISO_CONTEXT_TRANSMIT:
 		index = ctx - ohci->it_context_list;
 		ohci->it_context_mask |= 1 << index;
-	} else {
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE:
 		index = ctx - ohci->ir_context_list;
 		ohci->ir_context_mask |= 1 << index;
 		ohci->ir_context_channels |= 1ULL << base->channel;
+		break;
+
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		index = ctx - ohci->ir_context_list;
+		ohci->ir_context_mask |= 1 << index;
+		ohci->ir_context_channels |= ohci->mc_channels;
+		ohci->mc_channels = 0;
+		ohci->mc_allocated = false;
+		break;
 	}
 
 	spin_unlock_irqrestore(&ohci->lock, flags);
 }
 
-static int ohci_queue_iso_transmit(struct fw_iso_context *base,
-				   struct fw_iso_packet *packet,
-				   struct fw_iso_buffer *buffer,
-				   unsigned long payload)
+static int ohci_set_iso_channels(struct fw_iso_context *base, u64 *channels)
+{
+	struct fw_ohci *ohci = fw_ohci(base->card);
+	unsigned long flags;
+	int ret;
+
+	switch (base->type) {
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+
+		spin_lock_irqsave(&ohci->lock, flags);
+
+		/* Don't allow multichannel to grab other contexts' channels. */
+		if (~ohci->ir_context_channels & ~ohci->mc_channels & *channels) {
+			*channels = ohci->ir_context_channels;
+			ret = -EBUSY;
+		} else {
+			set_multichannel_mask(ohci, *channels);
+			ret = 0;
+		}
+
+		spin_unlock_irqrestore(&ohci->lock, flags);
+
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int queue_iso_transmit(struct iso_context *ctx,
+			      struct fw_iso_packet *packet,
+			      struct fw_iso_buffer *buffer,
+			      unsigned long payload)
 {
-	struct iso_context *ctx = container_of(base, struct iso_context, base);
 	struct descriptor *d, *last, *pd;
 	struct fw_iso_packet *p;
 	__le32 *header;
@@ -2291,14 +2624,12 @@ static int ohci_queue_iso_transmit(struct fw_iso_context *base,
 	return 0;
 }
 
-static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
-					struct fw_iso_packet *packet,
-					struct fw_iso_buffer *buffer,
-					unsigned long payload)
+static int queue_iso_packet_per_buffer(struct iso_context *ctx,
+				       struct fw_iso_packet *packet,
+				       struct fw_iso_buffer *buffer,
+				       unsigned long payload)
 {
-	struct iso_context *ctx = container_of(base, struct iso_context, base);
 	struct descriptor *d, *pd;
-	struct fw_iso_packet *p = packet;
 	dma_addr_t d_bus, page_bus;
 	u32 z, header_z, rest;
 	int i, j, length;
@@ -2308,14 +2639,14 @@ static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
 	 * The OHCI controller puts the isochronous header and trailer in the
 	 * buffer, so we need at least 8 bytes.
 	 */
-	packet_count = p->header_length / ctx->base.header_size;
+	packet_count = packet->header_length / ctx->base.header_size;
 	header_size  = max(ctx->base.header_size, (size_t)8);
 
 	/* Get header size in number of descriptors. */
 	header_z = DIV_ROUND_UP(header_size, sizeof(*d));
 	page     = payload >> PAGE_SHIFT;
 	offset   = payload & ~PAGE_MASK;
-	payload_per_buffer = p->payload_length / packet_count;
+	payload_per_buffer = packet->payload_length / packet_count;
 
 	for (i = 0; i < packet_count; i++) {
 		/* d points to the header descriptor */
@@ -2327,7 +2658,7 @@ static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
 
 		d->control      = cpu_to_le16(DESCRIPTOR_STATUS |
 					      DESCRIPTOR_INPUT_MORE);
-		if (p->skip && i == 0)
+		if (packet->skip && i == 0)
 			d->control |= cpu_to_le16(DESCRIPTOR_WAIT);
 		d->req_count    = cpu_to_le16(header_size);
 		d->res_count    = d->req_count;
@@ -2360,7 +2691,7 @@ static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
 		pd->control = cpu_to_le16(DESCRIPTOR_STATUS |
 					  DESCRIPTOR_INPUT_LAST |
 					  DESCRIPTOR_BRANCH_ALWAYS);
-		if (p->interrupt && i == packet_count - 1)
+		if (packet->interrupt && i == packet_count - 1)
 			pd->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
 
 		context_append(&ctx->context, d, z, header_z);
@@ -2369,6 +2700,58 @@ static int ohci_queue_iso_receive_packet_per_buffer(struct fw_iso_context *base,
 	return 0;
 }
 
+static int queue_iso_buffer_fill(struct iso_context *ctx,
+				 struct fw_iso_packet *packet,
+				 struct fw_iso_buffer *buffer,
+				 unsigned long payload)
+{
+	struct descriptor *d;
+	dma_addr_t d_bus, page_bus;
+	int page, offset, rest, z, i, length;
+
+	page   = payload >> PAGE_SHIFT;
+	offset = payload & ~PAGE_MASK;
+	rest   = packet->payload_length;
+
+	/* We need one descriptor for each page in the buffer. */
+	z = DIV_ROUND_UP(offset + rest, PAGE_SIZE);
+
+	if (WARN_ON(offset & 3 || rest & 3 || page + z > buffer->page_count))
+		return -EFAULT;
+
+	for (i = 0; i < z; i++) {
+		d = context_get_descriptors(&ctx->context, 1, &d_bus);
+		if (d == NULL)
+			return -ENOMEM;
+
+		d->control = cpu_to_le16(DESCRIPTOR_INPUT_MORE |
+					 DESCRIPTOR_BRANCH_ALWAYS);
+		if (packet->skip && i == 0)
+			d->control |= cpu_to_le16(DESCRIPTOR_WAIT);
+		if (packet->interrupt && i == z - 1)
+			d->control |= cpu_to_le16(DESCRIPTOR_IRQ_ALWAYS);
+
+		if (offset + rest < PAGE_SIZE)
+			length = rest;
+		else
+			length = PAGE_SIZE - offset;
+		d->req_count = cpu_to_le16(length);
+		d->res_count = d->req_count;
+		d->transfer_status = 0;
+
+		page_bus = page_private(buffer->pages[page]);
+		d->data_address = cpu_to_le32(page_bus + offset);
+
+		rest -= length;
+		offset = 0;
+		page++;
+
+		context_append(&ctx->context, d, 1, 0);
+	}
+
+	return 0;
+}
+
 static int ohci_queue_iso(struct fw_iso_context *base,
 			  struct fw_iso_packet *packet,
 			  struct fw_iso_buffer *buffer,
@@ -2376,14 +2759,20 @@ static int ohci_queue_iso(struct fw_iso_context *base,
 {
 	struct iso_context *ctx = container_of(base, struct iso_context, base);
 	unsigned long flags;
-	int ret;
+	int ret = -ENOSYS;
 
 	spin_lock_irqsave(&ctx->context.ohci->lock, flags);
-	if (base->type == FW_ISO_CONTEXT_TRANSMIT)
-		ret = ohci_queue_iso_transmit(base, packet, buffer, payload);
-	else
-		ret = ohci_queue_iso_receive_packet_per_buffer(base, packet,
-							buffer, payload);
+	switch (base->type) {
+	case FW_ISO_CONTEXT_TRANSMIT:
+		ret = queue_iso_transmit(ctx, packet, buffer, payload);
+		break;
+	case FW_ISO_CONTEXT_RECEIVE:
+		ret = queue_iso_packet_per_buffer(ctx, packet, buffer, payload);
+		break;
+	case FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+		ret = queue_iso_buffer_fill(ctx, packet, buffer, payload);
+		break;
+	}
 	spin_unlock_irqrestore(&ctx->context.ohci->lock, flags);
 
 	return ret;
@@ -2391,16 +2780,19 @@ static int ohci_queue_iso(struct fw_iso_context *base,
 
 static const struct fw_card_driver ohci_driver = {
 	.enable			= ohci_enable,
+	.read_phy_reg		= ohci_read_phy_reg,
 	.update_phy_reg		= ohci_update_phy_reg,
 	.set_config_rom		= ohci_set_config_rom,
 	.send_request		= ohci_send_request,
 	.send_response		= ohci_send_response,
 	.cancel_packet		= ohci_cancel_packet,
 	.enable_phys_dma	= ohci_enable_phys_dma,
-	.get_cycle_time		= ohci_get_cycle_time,
+	.read_csr		= ohci_read_csr,
+	.write_csr		= ohci_write_csr,
 
 	.allocate_iso_context	= ohci_allocate_iso_context,
 	.free_iso_context	= ohci_free_iso_context,
+	.set_iso_channels	= ohci_set_iso_channels,
 	.queue_iso		= ohci_queue_iso,
 	.start_iso		= ohci_start_iso,
 	.stop_iso		= ohci_stop_iso,
@@ -2465,6 +2857,7 @@ static int __devinit pci_probe(struct pci_dev *dev,
 	pci_set_drvdata(dev, ohci);
 
 	spin_lock_init(&ohci->lock);
+	mutex_init(&ohci->phy_reg_mutex);
 
 	tasklet_init(&ohci->bus_reset_tasklet,
 		     bus_reset_tasklet, (unsigned long)ohci);
@@ -2625,6 +3018,7 @@ static void pci_remove(struct pci_dev *dev)
 	context_release(&ohci->at_response_ctx);
 	kfree(ohci->it_context_list);
 	kfree(ohci->ir_context_list);
+	pci_disable_msi(dev);
 	pci_iounmap(dev, ohci->registers);
 	pci_release_region(dev, 0);
 	pci_disable_device(dev);
@@ -2642,6 +3036,7 @@ static int pci_suspend(struct pci_dev *dev, pm_message_t state)
 
 	software_reset(ohci);
 	free_irq(dev->irq, ohci);
+	pci_disable_msi(dev);
 	err = pci_save_state(dev);
 	if (err) {
 		fw_error("pci_save_state failed\n");
diff --git a/drivers/firewire/ohci.h b/drivers/firewire/ohci.h
index 3bc9a5d744e..0e6c5a46690 100644
--- a/drivers/firewire/ohci.h
+++ b/drivers/firewire/ohci.h
@@ -60,6 +60,7 @@
 #define   OHCI1394_LinkControl_cycleSource	(1 << 22)
 #define OHCI1394_NodeID                       0x0E8
 #define   OHCI1394_NodeID_idValid             0x80000000
+#define   OHCI1394_NodeID_root                0x40000000
 #define   OHCI1394_NodeID_nodeNumber          0x0000003f
 #define   OHCI1394_NodeID_busNumber           0x0000ffc0
 #define OHCI1394_PhyControl                   0x0EC
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index ca264f2fdf0..9f76171717e 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -410,8 +410,7 @@ static void free_orb(struct kref *kref)
 
 static void sbp2_status_write(struct fw_card *card, struct fw_request *request,
 			      int tcode, int destination, int source,
-			      int generation, int speed,
-			      unsigned long long offset,
+			      int generation, unsigned long long offset,
 			      void *payload, size_t length, void *callback_data)
 {
 	struct sbp2_logical_unit *lu = callback_data;
@@ -508,8 +507,7 @@ static void sbp2_send_orb(struct sbp2_orb *orb, struct sbp2_logical_unit *lu,
 
 	fw_send_request(device->card, &orb->t, TCODE_WRITE_BLOCK_REQUEST,
 			node_id, generation, device->max_speed, offset,
-			&orb->pointer, sizeof(orb->pointer),
-			complete_transaction, orb);
+			&orb->pointer, 8, complete_transaction, orb);
 }
 
 static int sbp2_cancel_orbs(struct sbp2_logical_unit *lu)
@@ -654,7 +652,7 @@ static void sbp2_agent_reset(struct sbp2_logical_unit *lu)
 	fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
 			   lu->tgt->node_id, lu->generation, device->max_speed,
 			   lu->command_block_agent_address + SBP2_AGENT_RESET,
-			   &d, sizeof(d));
+			   &d, 4);
 }
 
 static void complete_agent_reset_write_no_wait(struct fw_card *card,
@@ -676,7 +674,7 @@ static void sbp2_agent_reset_no_wait(struct sbp2_logical_unit *lu)
 	fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
 			lu->tgt->node_id, lu->generation, device->max_speed,
 			lu->command_block_agent_address + SBP2_AGENT_RESET,
-			&d, sizeof(d), complete_agent_reset_write_no_wait, t);
+			&d, 4, complete_agent_reset_write_no_wait, t);
 }
 
 static inline void sbp2_allow_block(struct sbp2_logical_unit *lu)
@@ -866,8 +864,7 @@ static void sbp2_set_busy_timeout(struct sbp2_logical_unit *lu)
 
 	fw_run_transaction(device->card, TCODE_WRITE_QUADLET_REQUEST,
 			   lu->tgt->node_id, lu->generation, device->max_speed,
-			   CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT,
-			   &d, sizeof(d));
+			   CSR_REGISTER_BASE + CSR_BUSY_TIMEOUT, &d, 4);
 }
 
 static void sbp2_reconnect(struct work_struct *work);
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index aa9bc9e980e..69ad529d92f 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -634,9 +634,6 @@ static void __exit dcdbas_exit(void)
 	 * before platform_device_unregister
 	 */
 	unregister_reboot_notifier(&dcdbas_reboot_nb);
-	smi_data_buf_free();
-	platform_device_unregister(dcdbas_pdev);
-	platform_driver_unregister(&dcdbas_driver);
 
 	/*
 	 * We have to free the buffer here instead of dcdbas_remove
@@ -645,6 +642,8 @@ static void __exit dcdbas_exit(void)
 	 * released.
 	 */
 	smi_data_buf_free();
+	platform_device_unregister(dcdbas_pdev);
+	platform_driver_unregister(&dcdbas_driver);
 }
 
 module_init(dcdbas_init);
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
index a777a35381d..94a58a082b9 100644
--- a/drivers/firmware/dmi-id.c
+++ b/drivers/firmware/dmi-id.c
@@ -229,10 +229,12 @@ static int __init dmi_id_init(void)
 
 	ret = device_register(dmi_dev);
 	if (ret)
-		goto fail_class_unregister;
+		goto fail_free_dmi_dev;
 
 	return 0;
 
+fail_free_dmi_dev:
+	kfree(dmi_dev);
 fail_class_unregister:
 
 	class_unregister(&dmi_class);
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index d4646727134..b3d22d65999 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -277,6 +277,29 @@ static void __init dmi_save_ipmi_device(const struct dmi_header *dm)
 	list_add_tail(&dev->list, &dmi_devices);
 }
 
+static void __init dmi_save_dev_onboard(int instance, int segment, int bus,
+					int devfn, const char *name)
+{
+	struct dmi_dev_onboard *onboard_dev;
+
+	onboard_dev = dmi_alloc(sizeof(*onboard_dev) + strlen(name) + 1);
+	if (!onboard_dev) {
+		printk(KERN_ERR "dmi_save_dev_onboard: out of memory.\n");
+		return;
+	}
+	onboard_dev->instance = instance;
+	onboard_dev->segment = segment;
+	onboard_dev->bus = bus;
+	onboard_dev->devfn = devfn;
+
+	strcpy((char *)&onboard_dev[1], name);
+	onboard_dev->dev.type = DMI_DEV_TYPE_DEV_ONBOARD;
+	onboard_dev->dev.name = (char *)&onboard_dev[1];
+	onboard_dev->dev.device_data = onboard_dev;
+
+	list_add(&onboard_dev->dev.list, &dmi_devices);
+}
+
 static void __init dmi_save_extended_devices(const struct dmi_header *dm)
 {
 	const u8 *d = (u8*) dm + 5;
@@ -285,6 +308,8 @@ static void __init dmi_save_extended_devices(const struct dmi_header *dm)
 	if ((*d & 0x80) == 0)
 		return;
 
+	dmi_save_dev_onboard(*(d+1), *(u16 *)(d+2), *(d+4), *(d+5),
+			     dmi_string_nosave(dm, *(d-1)));
 	dmi_save_one_device(*d & 0x7f, dmi_string_nosave(dm, *(d - 1)));
 }
 
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 110e24e5088..f287fe79edc 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -744,7 +744,7 @@ static inline int edd_num_devices(void)
 static int __init
 edd_init(void)
 {
-	unsigned int i;
+	int i;
 	int rc=0;
 	struct edd_device *edev;
 
@@ -760,21 +760,27 @@ edd_init(void)
 	if (!edd_kset)
 		return -ENOMEM;
 
-	for (i = 0; i < edd_num_devices() && !rc; i++) {
+	for (i = 0; i < edd_num_devices(); i++) {
 		edev = kzalloc(sizeof (*edev), GFP_KERNEL);
-		if (!edev)
-			return -ENOMEM;
+		if (!edev) {
+			rc = -ENOMEM;
+			goto out;
+		}
 
 		rc = edd_device_register(edev, i);
 		if (rc) {
 			kfree(edev);
-			break;
+			goto out;
 		}
 		edd_devices[i] = edev;
 	}
 
-	if (rc)
-		kset_unregister(edd_kset);
+	return 0;
+
+out:
+	while (--i >= 0)
+		edd_device_unregister(edd_devices[i]);
+	kset_unregister(edd_kset);
 	return rc;
 }
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 4e51fe3c1fc..6a6bd569e1f 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -8,6 +8,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/idr.h>
 #include <linux/slab.h>
 
@@ -1100,16 +1101,24 @@ int gpiochip_add(struct gpio_chip *chip)
 		}
 	}
 
+	of_gpiochip_add(chip);
+
 unlock:
 	spin_unlock_irqrestore(&gpio_lock, flags);
-	if (status == 0)
-		status = gpiochip_export(chip);
+
+	if (status)
+		goto fail;
+
+	status = gpiochip_export(chip);
+	if (status)
+		goto fail;
+
+	return 0;
 fail:
 	/* failures here can mean systems won't boot... */
-	if (status)
-		pr_err("gpiochip_add: gpios %d..%d (%s) failed to register\n",
-			chip->base, chip->base + chip->ngpio - 1,
-			chip->label ? : "generic");
+	pr_err("gpiochip_add: gpios %d..%d (%s) failed to register\n",
+		chip->base, chip->base + chip->ngpio - 1,
+		chip->label ? : "generic");
 	return status;
 }
 EXPORT_SYMBOL_GPL(gpiochip_add);
@@ -1128,6 +1137,8 @@ int gpiochip_remove(struct gpio_chip *chip)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
+	of_gpiochip_remove(chip);
+
 	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
 		if (test_bit(FLAG_REQUESTED, &gpio_desc[id].flags)) {
 			status = -EBUSY;
@@ -1148,6 +1159,38 @@ int gpiochip_remove(struct gpio_chip *chip)
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
 
+/**
+ * gpiochip_find() - iterator for locating a specific gpio_chip
+ * @data: data to pass to match function
+ * @callback: Callback function to check gpio_chip
+ *
+ * Similar to bus_find_device.  It returns a reference to a gpio_chip as
+ * determined by a user supplied @match callback.  The callback should return
+ * 0 if the device doesn't match and non-zero if it does.  If the callback is
+ * non-zero, this function will return to the caller and not iterate over any
+ * more gpio_chips.
+ */
+struct gpio_chip *gpiochip_find(void *data,
+				int (*match)(struct gpio_chip *chip, void *data))
+{
+	struct gpio_chip *chip = NULL;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	for (i = 0; i < ARCH_NR_GPIOS; i++) {
+		if (!gpio_desc[i].chip)
+			continue;
+
+		if (match(gpio_desc[i].chip, data)) {
+			chip = gpio_desc[i].chip;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return chip;
+}
 
 /* These "optional" allocation calls help prevent drivers from stomping
  * on each other, and help provide better diagnostics in debugfs.
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
index b8fa65b5bfc..709690995d0 100644
--- a/drivers/gpio/xilinx_gpio.c
+++ b/drivers/gpio/xilinx_gpio.c
@@ -161,14 +161,12 @@ static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
 static int __devinit xgpio_of_probe(struct device_node *np)
 {
 	struct xgpio_instance *chip;
-	struct of_gpio_chip *ofchip;
 	int status = 0;
 	const u32 *tree_info;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (!chip)
 		return -ENOMEM;
-	ofchip = &chip->mmchip.of_gc;
 
 	/* Update GPIO state shadow register with default value */
 	tree_info = of_get_property(np, "xlnx,dout-default", NULL);
@@ -182,21 +180,20 @@ static int __devinit xgpio_of_probe(struct device_node *np)
 		chip->gpio_dir = *tree_info;
 
 	/* Check device node and parent device node for device width */
-	ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */
+	chip->mmchip.gc.ngpio = 32; /* By default assume full GPIO controller */
 	tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
 	if (!tree_info)
 		tree_info = of_get_property(np->parent,
 					    "xlnx,gpio-width", NULL);
 	if (tree_info)
-		ofchip->gc.ngpio = *tree_info;
+		chip->mmchip.gc.ngpio = *tree_info;
 
 	spin_lock_init(&chip->gpio_lock);
 
-	ofchip->gpio_cells = 2;
-	ofchip->gc.direction_input = xgpio_dir_in;
-	ofchip->gc.direction_output = xgpio_dir_out;
-	ofchip->gc.get = xgpio_get;
-	ofchip->gc.set = xgpio_set;
+	chip->mmchip.gc.direction_input = xgpio_dir_in;
+	chip->mmchip.gc.direction_output = xgpio_dir_out;
+	chip->mmchip.gc.get = xgpio_get;
+	chip->mmchip.gc.set = xgpio_set;
 
 	chip->mmchip.save_regs = xgpio_save_regs;
 
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 88910e5a2c7..4cab0c6397e 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -6,7 +6,7 @@
 #
 menuconfig DRM
 	tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
-	depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG && MMU
+	depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU
 	select I2C
 	select I2C_ALGOBIT
 	select SLOW_WORK
@@ -17,7 +17,7 @@ menuconfig DRM
 	  These modules provide support for synchronization, security, and
 	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
 	  details.  You should also select and configure AGP
-	  (/dev/agpgart) support.
+	  (/dev/agpgart) support if it is available for your platform.
 
 config DRM_KMS_HELPER
 	tristate
@@ -61,6 +61,7 @@ config DRM_RADEON
         select DRM_KMS_HELPER
         select DRM_TTM
 	select POWER_SUPPLY
+	select HWMON
 	help
 	  Choose this option if you have an ATI Radeon graphics card.  There
 	  are both PCI and AGP versions.  You don't need to choose this to
@@ -130,7 +131,7 @@ endchoice
 
 config DRM_MGA
 	tristate "Matrox g200/g400"
-	depends on DRM
+	depends on DRM && PCI
 	select FW_LOADER
 	help
 	  Choose this option if you have a Matrox G200, G400 or G450 graphics
@@ -148,14 +149,14 @@ config DRM_SIS
 
 config DRM_VIA
 	tristate "Via unichrome video cards"
-	depends on DRM
+	depends on DRM && PCI
 	help
 	  Choose this option if you have a Via unichrome or compatible video
 	  chipset. If M is selected the module will be called via.
 
 config DRM_SAVAGE
 	tristate "Savage video cards"
-	depends on DRM
+	depends on DRM && PCI
 	help
 	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 	  chipset. If M is selected the module will be called savage.
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index abe3f446ca4..f3a23a329f4 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -9,9 +9,10 @@ drm-y       :=	drm_auth.o drm_buffer.o drm_bufs.o drm_cache.o \
 		drm_drv.o drm_fops.o drm_gem.o drm_ioctl.o drm_irq.o \
 		drm_lock.o drm_memory.o drm_proc.o drm_stub.o drm_vm.o \
 		drm_agpsupport.o drm_scatter.o ati_pcigart.o drm_pci.o \
-		drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o \
+		drm_platform.o drm_sysfs.o drm_hashtab.o drm_sman.o drm_mm.o \
 		drm_crtc.o drm_modes.o drm_edid.o \
-		drm_info.o drm_debugfs.o drm_encoder_slave.o
+		drm_info.o drm_debugfs.o drm_encoder_slave.o \
+		drm_trace_points.o drm_global.o
 
 drm-$(CONFIG_COMPAT) += drm_ioc32.o
 
@@ -19,6 +20,8 @@ drm_kms_helper-y := drm_fb_helper.o drm_crtc_helper.o drm_dp_i2c_helper.o
 
 obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
 
+CFLAGS_drm_trace_points.o := -I$(src)
+
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_TTM)	+= ttm/
 obj-$(CONFIG_DRM_TDFX)	+= tdfx/
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 2092e7bb788..a5c9ce93bbc 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -39,19 +39,6 @@
 #include <asm/shmparam.h>
 #include "drmP.h"
 
-resource_size_t drm_get_resource_start(struct drm_device *dev, unsigned int resource)
-{
-	return pci_resource_start(dev->pdev, resource);
-}
-EXPORT_SYMBOL(drm_get_resource_start);
-
-resource_size_t drm_get_resource_len(struct drm_device *dev, unsigned int resource)
-{
-	return pci_resource_len(dev->pdev, resource);
-}
-
-EXPORT_SYMBOL(drm_get_resource_len);
-
 static struct drm_map_list *drm_find_matching_map(struct drm_device *dev,
 						  struct drm_local_map *map)
 {
@@ -189,7 +176,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
 	switch (map->type) {
 	case _DRM_REGISTERS:
 	case _DRM_FRAME_BUFFER:
-#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) && !defined(__powerpc64__) && !defined(__x86_64__)
+#if !defined(__sparc__) && !defined(__alpha__) && !defined(__ia64__) && !defined(__powerpc64__) && !defined(__x86_64__) && !defined(__arm__)
 		if (map->offset + (map->size-1) < map->offset ||
 		    map->offset < virt_to_phys(high_memory)) {
 			kfree(map);
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 57cea01c4ff..4c68f76993d 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -80,6 +80,7 @@ static struct drm_prop_enum_list drm_dithering_mode_enum_list[] =
 {
 	{ DRM_MODE_DITHERING_OFF, "Off" },
 	{ DRM_MODE_DITHERING_ON, "On" },
+	{ DRM_MODE_DITHERING_AUTO, "Automatic" },
 };
 
 /*
@@ -1126,7 +1127,7 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
 		if (file_priv->master->minor->type == DRM_MINOR_CONTROL) {
 			list_for_each_entry(crtc, &dev->mode_config.crtc_list,
 					    head) {
-				DRM_DEBUG_KMS("CRTC ID is %d\n", crtc->base.id);
+				DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
 				if (put_user(crtc->base.id, crtc_id + copied)) {
 					ret = -EFAULT;
 					goto out;
@@ -1154,8 +1155,8 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
 			list_for_each_entry(encoder,
 					    &dev->mode_config.encoder_list,
 					    head) {
-				DRM_DEBUG_KMS("ENCODER ID is %d\n",
-					  encoder->base.id);
+				DRM_DEBUG_KMS("[ENCODER:%d:%s]\n", encoder->base.id,
+						drm_get_encoder_name(encoder));
 				if (put_user(encoder->base.id, encoder_id +
 					     copied)) {
 					ret = -EFAULT;
@@ -1185,8 +1186,9 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
 			list_for_each_entry(connector,
 					    &dev->mode_config.connector_list,
 					    head) {
-				DRM_DEBUG_KMS("CONNECTOR ID is %d\n",
-					  connector->base.id);
+				DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+					connector->base.id,
+					drm_get_connector_name(connector));
 				if (put_user(connector->base.id,
 					     connector_id + copied)) {
 					ret = -EFAULT;
@@ -1209,7 +1211,7 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
 	}
 	card_res->count_connectors = connector_count;
 
-	DRM_DEBUG_KMS("Counted %d %d %d\n", card_res->count_crtcs,
+	DRM_DEBUG_KMS("CRTC[%d] CONNECTORS[%d] ENCODERS[%d]\n", card_res->count_crtcs,
 		  card_res->count_connectors, card_res->count_encoders);
 
 out:
@@ -1312,7 +1314,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data,
 
 	memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
 
-	DRM_DEBUG_KMS("connector id %d:\n", out_resp->connector_id);
+	DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id);
 
 	mutex_lock(&dev->mode_config.mutex);
 
@@ -1493,6 +1495,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 		goto out;
 	}
 	crtc = obj_to_crtc(obj);
+	DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
 
 	if (crtc_req->mode_valid) {
 		/* If we have a mode we need a framebuffer. */
@@ -1569,6 +1572,9 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 				goto out;
 			}
 			connector = obj_to_connector(obj);
+			DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
+					connector->base.id,
+					drm_get_connector_name(connector));
 
 			connector_set[i] = connector;
 		}
@@ -1684,6 +1690,7 @@ int drm_mode_addfb(struct drm_device *dev,
 
 	r->fb_id = fb->base.id;
 	list_add(&fb->filp_head, &file_priv->fbs);
+	DRM_DEBUG_KMS("[FB:%d]\n", fb->base.id);
 
 out:
 	mutex_unlock(&dev->mode_config.mutex);
@@ -2610,6 +2617,15 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
 		goto out;
 	crtc = obj_to_crtc(obj);
 
+	if (crtc->fb == NULL) {
+		/* The framebuffer is currently unbound, presumably
+		 * due to a hotplug event, that userspace has not
+		 * yet discovered.
+		 */
+		ret = -EBUSY;
+		goto out;
+	}
+
 	if (crtc->funcs->page_flip == NULL)
 		goto out;
 
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 9b2a54117c9..b9e4dbfa053 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -86,7 +86,8 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	int count = 0;
 	int mode_flags = 0;
 
-	DRM_DEBUG_KMS("%s\n", drm_get_connector_name(connector));
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
+			drm_get_connector_name(connector));
 	/* set all modes to the unverified state */
 	list_for_each_entry_safe(mode, t, &connector->modes, head)
 		mode->status = MODE_UNVERIFIED;
@@ -102,8 +103,8 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		connector->status = connector->funcs->detect(connector);
 
 	if (connector->status == connector_status_disconnected) {
-		DRM_DEBUG_KMS("%s is disconnected\n",
-			  drm_get_connector_name(connector));
+		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
+			connector->base.id, drm_get_connector_name(connector));
 		drm_mode_connector_update_edid_property(connector, NULL);
 		goto prune;
 	}
@@ -141,8 +142,8 @@ prune:
 
 	drm_mode_sort(&connector->modes);
 
-	DRM_DEBUG_KMS("Probed modes for %s\n",
-				drm_get_connector_name(connector));
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id,
+			drm_get_connector_name(connector));
 	list_for_each_entry_safe(mode, t, &connector->modes, head) {
 		mode->vrefresh = drm_mode_vrefresh(mode);
 
@@ -201,6 +202,17 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc)
 }
 EXPORT_SYMBOL(drm_helper_crtc_in_use);
 
+static void
+drm_encoder_disable(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+
+	if (encoder_funcs->disable)
+		(*encoder_funcs->disable)(encoder);
+	else
+		(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+}
+
 /**
  * drm_helper_disable_unused_functions - disable unused objects
  * @dev: DRM device
@@ -215,7 +227,6 @@ void drm_helper_disable_unused_functions(struct drm_device *dev)
 {
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
-	struct drm_encoder_helper_funcs *encoder_funcs;
 	struct drm_crtc *crtc;
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -226,12 +237,8 @@ void drm_helper_disable_unused_functions(struct drm_device *dev)
 	}
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		encoder_funcs = encoder->helper_private;
 		if (!drm_helper_encoder_in_use(encoder)) {
-			if (encoder_funcs->disable)
-				(*encoder_funcs->disable)(encoder);
-			else
-				(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+			drm_encoder_disable(encoder);
 			/* disconnector encoder from any connector */
 			encoder->crtc = NULL;
 		}
@@ -241,7 +248,10 @@ void drm_helper_disable_unused_functions(struct drm_device *dev)
 		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 		crtc->enabled = drm_helper_crtc_in_use(crtc);
 		if (!crtc->enabled) {
-			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+			if (crtc_funcs->disable)
+				(*crtc_funcs->disable)(crtc);
+			else
+				(*crtc_funcs->dpms)(crtc, DRM_MODE_DPMS_OFF);
 			crtc->fb = NULL;
 		}
 	}
@@ -292,11 +302,11 @@ drm_crtc_prepare_encoders(struct drm_device *dev)
 		encoder_funcs = encoder->helper_private;
 		/* Disable unused encoders */
 		if (encoder->crtc == NULL)
-			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+			drm_encoder_disable(encoder);
 		/* Disable encoders whose CRTC is about to change */
 		if (encoder_funcs->get_crtc &&
 		    encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
-			(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+			drm_encoder_disable(encoder);
 	}
 }
 
@@ -365,6 +375,7 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 	if (!(ret = crtc_funcs->mode_fixup(crtc, mode, adjusted_mode))) {
 		goto done;
 	}
+	DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id);
 
 	/* Prepare the encoders and CRTCs before setting the mode. */
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
@@ -392,8 +403,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
 		if (encoder->crtc != crtc)
 			continue;
 
-		DRM_DEBUG("%s: set mode %s %x\n", drm_get_encoder_name(encoder),
-			 mode->name, mode->base.id);
+		DRM_DEBUG_KMS("[ENCODER:%d:%s] set [MODE:%d:%s]\n",
+			encoder->base.id, drm_get_encoder_name(encoder),
+			mode->base.id, mode->name);
 		encoder_funcs = encoder->helper_private;
 		encoder_funcs->mode_set(encoder, mode, adjusted_mode);
 	}
@@ -469,10 +481,15 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 
 	crtc_funcs = set->crtc->helper_private;
 
-	DRM_DEBUG_KMS("crtc: %p %d fb: %p connectors: %p num_connectors:"
-			" %d (x, y) (%i, %i)\n",
-		  set->crtc, set->crtc->base.id, set->fb, set->connectors,
-		  (int)set->num_connectors, set->x, set->y);
+	if (set->fb) {
+		DRM_DEBUG_KMS("[CRTC:%d] [FB:%d] #connectors=%d (x y) (%i %i)\n",
+				set->crtc->base.id, set->fb->base.id,
+				(int)set->num_connectors, set->x, set->y);
+	} else {
+		DRM_DEBUG_KMS("[CRTC:%d] [NOFB] #connectors=%d (x y) (%i %i)\n",
+				set->crtc->base.id, (int)set->num_connectors,
+				set->x, set->y);
+	}
 
 	dev = set->crtc->dev;
 
@@ -601,8 +618,14 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 			mode_changed = true;
 			connector->encoder->crtc = new_crtc;
 		}
-		DRM_DEBUG_KMS("setting connector %d crtc to %p\n",
-			  connector->base.id, new_crtc);
+		if (new_crtc) {
+			DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
+				connector->base.id, drm_get_connector_name(connector),
+				new_crtc->base.id);
+		} else {
+			DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
+				connector->base.id, drm_get_connector_name(connector));
+		}
 	}
 
 	/* mode_set_base is not a required function */
@@ -620,8 +643,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 			if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
 						      set->x, set->y,
 						      old_fb)) {
-				DRM_ERROR("failed to set mode on crtc %p\n",
-					  set->crtc);
+				DRM_ERROR("failed to set mode on [CRTC:%d]\n",
+					  set->crtc->base.id);
 				ret = -EINVAL;
 				goto fail;
 			}
@@ -808,17 +831,14 @@ int drm_helper_resume_force_mode(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_helper_resume_force_mode);
 
-static struct slow_work_ops output_poll_ops;
-
 #define DRM_OUTPUT_POLL_PERIOD (10*HZ)
-static void output_poll_execute(struct slow_work *work)
+static void output_poll_execute(struct work_struct *work)
 {
-	struct delayed_slow_work *delayed_work = container_of(work, struct delayed_slow_work, work);
-	struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_slow_work);
+	struct delayed_work *delayed_work = to_delayed_work(work);
+	struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
 	struct drm_connector *connector;
 	enum drm_connector_status old_status, status;
 	bool repoll = false, changed = false;
-	int ret;
 
 	mutex_lock(&dev->mode_config.mutex);
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -853,18 +873,15 @@ static void output_poll_execute(struct slow_work *work)
 			dev->mode_config.funcs->output_poll_changed(dev);
 	}
 
-	if (repoll) {
-		ret = delayed_slow_work_enqueue(delayed_work, DRM_OUTPUT_POLL_PERIOD);
-		if (ret)
-			DRM_ERROR("delayed enqueue failed %d\n", ret);
-	}
+	if (repoll)
+		queue_delayed_work(system_nrt_wq, delayed_work, DRM_OUTPUT_POLL_PERIOD);
 }
 
 void drm_kms_helper_poll_disable(struct drm_device *dev)
 {
 	if (!dev->mode_config.poll_enabled)
 		return;
-	delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
+	cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_disable);
 
@@ -872,26 +889,20 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
 {
 	bool poll = false;
 	struct drm_connector *connector;
-	int ret;
 
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		if (connector->polled)
 			poll = true;
 	}
 
-	if (poll) {
-		ret = delayed_slow_work_enqueue(&dev->mode_config.output_poll_slow_work, DRM_OUTPUT_POLL_PERIOD);
-		if (ret)
-			DRM_ERROR("delayed enqueue failed %d\n", ret);
-	}
+	if (poll)
+		queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_enable);
 
 void drm_kms_helper_poll_init(struct drm_device *dev)
 {
-	slow_work_register_user(THIS_MODULE);
-	delayed_slow_work_init(&dev->mode_config.output_poll_slow_work,
-			       &output_poll_ops);
+	INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
 	dev->mode_config.poll_enabled = true;
 
 	drm_kms_helper_poll_enable(dev);
@@ -901,7 +912,6 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
 void drm_kms_helper_poll_fini(struct drm_device *dev)
 {
 	drm_kms_helper_poll_disable(dev);
-	slow_work_unregister_user(THIS_MODULE);
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
@@ -909,12 +919,8 @@ void drm_helper_hpd_irq_event(struct drm_device *dev)
 {
 	if (!dev->mode_config.poll_enabled)
 		return;
-	delayed_slow_work_cancel(&dev->mode_config.output_poll_slow_work);
-	/* schedule a slow work asap */
-	delayed_slow_work_enqueue(&dev->mode_config.output_poll_slow_work, 0);
+	/* kill timer and schedule immediate execution, this doesn't block */
+	cancel_delayed_work(&dev->mode_config.output_poll_work);
+	queue_delayed_work(system_nrt_wq, &dev->mode_config.output_poll_work, 0);
 }
 EXPORT_SYMBOL(drm_helper_hpd_irq_event);
-
-static struct slow_work_ops output_poll_ops = {
-	.execute = output_poll_execute,
-};
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 4a66201edae..90288ec7c28 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -243,47 +243,20 @@ int drm_lastclose(struct drm_device * dev)
  *
  * Initializes an array of drm_device structures, and attempts to
  * initialize all available devices, using consecutive minors, registering the
- * stubs and initializing the AGP device.
+ * stubs and initializing the device.
  *
  * Expands the \c DRIVER_PREINIT and \c DRIVER_POST_INIT macros before and
  * after the initialization for driver customization.
  */
 int drm_init(struct drm_driver *driver)
 {
-	struct pci_dev *pdev = NULL;
-	const struct pci_device_id *pid;
-	int i;
-
 	DRM_DEBUG("\n");
-
 	INIT_LIST_HEAD(&driver->device_list);
 
-	if (driver->driver_features & DRIVER_MODESET)
-		return pci_register_driver(&driver->pci_driver);
-
-	/* If not using KMS, fall back to stealth mode manual scanning. */
-	for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) {
-		pid = &driver->pci_driver.id_table[i];
-
-		/* Loop around setting up a DRM device for each PCI device
-		 * matching our ID and device class.  If we had the internal
-		 * function that pci_get_subsys and pci_get_class used, we'd
-		 * be able to just pass pid in instead of doing a two-stage
-		 * thing.
-		 */
-		pdev = NULL;
-		while ((pdev =
-			pci_get_subsys(pid->vendor, pid->device, pid->subvendor,
-				       pid->subdevice, pdev)) != NULL) {
-			if ((pdev->class & pid->class_mask) != pid->class)
-				continue;
-
-			/* stealth mode requires a manual probe */
-			pci_dev_get(pdev);
-			drm_get_dev(pdev, pid, driver);
-		}
-	}
-	return 0;
+	if (driver->driver_features & DRIVER_USE_PLATFORM_DEVICE)
+		return drm_platform_init(driver);
+	else
+		return drm_pci_init(driver);
 }
 
 EXPORT_SYMBOL(drm_init);
@@ -315,6 +288,7 @@ static int __init drm_core_init(void)
 {
 	int ret = -ENOMEM;
 
+	drm_global_init();
 	idr_init(&drm_minors_idr);
 
 	if (register_chrdev(DRM_MAJOR, "drm", &drm_stub_fops))
@@ -362,6 +336,7 @@ static void __exit drm_core_exit(void)
 
 	unregister_chrdev(DRM_MAJOR, "drm");
 
+	idr_remove_all(&drm_minors_idr);
 	idr_destroy(&drm_minors_idr);
 }
 
@@ -506,9 +481,9 @@ long drm_ioctl(struct file *filp,
 		if (ioctl->flags & DRM_UNLOCKED)
 			retcode = func(dev, kdata, file_priv);
 		else {
-			lock_kernel();
+			mutex_lock(&drm_global_mutex);
 			retcode = func(dev, kdata, file_priv);
-			unlock_kernel();
+			mutex_unlock(&drm_global_mutex);
 		}
 
 		if (cmd & IOC_OUT) {
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 9585e531ac6..dce5c4a97f8 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -282,7 +282,7 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 	return block;
 
 carp:
-	dev_warn(&connector->dev->pdev->dev, "%s: EDID block %d invalid.\n",
+	dev_warn(connector->dev->dev, "%s: EDID block %d invalid.\n",
 		 drm_get_connector_name(connector), j);
 
 out:
@@ -1623,7 +1623,7 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 		return 0;
 	}
 	if (!drm_edid_is_valid(edid)) {
-		dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
+		dev_warn(connector->dev->dev, "%s: EDID invalid.\n",
 			 drm_get_connector_name(connector));
 		return 0;
 	}
diff --git a/drivers/gpu/drm/drm_encoder_slave.c b/drivers/gpu/drm/drm_encoder_slave.c
index f0184696edf..d62c064fbaa 100644
--- a/drivers/gpu/drm/drm_encoder_slave.c
+++ b/drivers/gpu/drm/drm_encoder_slave.c
@@ -41,6 +41,9 @@
  * &drm_encoder_slave. The @slave_funcs field will be initialized with
  * the hooks provided by the slave driver.
  *
+ * If @info->platform_data is non-NULL it will be used as the initial
+ * slave config.
+ *
  * Returns 0 on success or a negative errno on failure, in particular,
  * -ENODEV is returned when no matching driver is found.
  */
@@ -85,6 +88,10 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 	if (err)
 		goto fail_unregister;
 
+	if (info->platform_data)
+		encoder->slave_funcs->set_config(&encoder->base,
+						 info->platform_data);
+
 	return 0;
 
 fail_unregister:
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 719662034bb..de82e201d68 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -241,6 +241,80 @@ static int drm_fb_helper_parse_command_line(struct drm_fb_helper *fb_helper)
 	return 0;
 }
 
+int drm_fb_helper_debug_enter(struct fb_info *info)
+{
+	struct drm_fb_helper *helper = info->par;
+	struct drm_crtc_helper_funcs *funcs;
+	int i;
+
+	if (list_empty(&kernel_fb_helper_list))
+		return false;
+
+	list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
+		for (i = 0; i < helper->crtc_count; i++) {
+			struct drm_mode_set *mode_set =
+				&helper->crtc_info[i].mode_set;
+
+			if (!mode_set->crtc->enabled)
+				continue;
+
+			funcs =	mode_set->crtc->helper_private;
+			funcs->mode_set_base_atomic(mode_set->crtc,
+						    mode_set->fb,
+						    mode_set->x,
+						    mode_set->y);
+
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_debug_enter);
+
+/* Find the real fb for a given fb helper CRTC */
+static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_crtc *c;
+
+	list_for_each_entry(c, &dev->mode_config.crtc_list, head) {
+		if (crtc->base.id == c->base.id)
+			return c->fb;
+	}
+
+	return NULL;
+}
+
+int drm_fb_helper_debug_leave(struct fb_info *info)
+{
+	struct drm_fb_helper *helper = info->par;
+	struct drm_crtc *crtc;
+	struct drm_crtc_helper_funcs *funcs;
+	struct drm_framebuffer *fb;
+	int i;
+
+	for (i = 0; i < helper->crtc_count; i++) {
+		struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
+		crtc = mode_set->crtc;
+		funcs = crtc->helper_private;
+		fb = drm_mode_config_fb(crtc);
+
+		if (!crtc->enabled)
+			continue;
+
+		if (!fb) {
+			DRM_ERROR("no fb to restore??\n");
+			continue;
+		}
+
+		funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
+					    crtc->y);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_debug_leave);
+
 bool drm_fb_helper_force_kernel_mode(void)
 {
 	int i = 0;
@@ -611,7 +685,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
 	struct drm_framebuffer *fb = fb_helper->fb;
 	int depth;
 
-	if (var->pixclock != 0)
+	if (var->pixclock != 0 || in_dbg_master())
 		return -EINVAL;
 
 	/* Need to resize the fb object !!! */
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index e7aace20981..2ca8df8b610 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -39,6 +39,9 @@
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 
+/* from BKL pushdown: note that nothing else serializes idr_find() */
+DEFINE_MUTEX(drm_global_mutex);
+
 static int drm_open_helper(struct inode *inode, struct file *filp,
 			   struct drm_device * dev);
 
@@ -175,8 +178,7 @@ int drm_stub_open(struct inode *inode, struct file *filp)
 
 	DRM_DEBUG("\n");
 
-	/* BKL pushdown: note that nothing else serializes idr_find() */
-	lock_kernel();
+	mutex_lock(&drm_global_mutex);
 	minor = idr_find(&drm_minors_idr, minor_id);
 	if (!minor)
 		goto out;
@@ -197,7 +199,7 @@ int drm_stub_open(struct inode *inode, struct file *filp)
 	fops_put(old_fops);
 
 out:
-	unlock_kernel();
+	mutex_unlock(&drm_global_mutex);
 	return err;
 }
 
@@ -472,7 +474,7 @@ int drm_release(struct inode *inode, struct file *filp)
 	struct drm_device *dev = file_priv->minor->dev;
 	int retcode = 0;
 
-	lock_kernel();
+	mutex_lock(&drm_global_mutex);
 
 	DRM_DEBUG("open_count = %d\n", dev->open_count);
 
@@ -573,17 +575,14 @@ int drm_release(struct inode *inode, struct file *filp)
 		if (atomic_read(&dev->ioctl_count)) {
 			DRM_ERROR("Device busy: %d\n",
 				  atomic_read(&dev->ioctl_count));
-			spin_unlock(&dev->count_lock);
-			unlock_kernel();
-			return -EBUSY;
+			retcode = -EBUSY;
+			goto out;
 		}
-		spin_unlock(&dev->count_lock);
-		unlock_kernel();
-		return drm_lastclose(dev);
+		retcode = drm_lastclose(dev);
 	}
+out:
 	spin_unlock(&dev->count_lock);
-
-	unlock_kernel();
+	mutex_unlock(&drm_global_mutex);
 
 	return retcode;
 }
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 33dad3fa604..4f1b8671448 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -68,8 +68,18 @@
  * We make up offsets for buffer objects so we can recognize them at
  * mmap time.
  */
+
+/* pgoff in mmap is an unsigned long, so we need to make sure that
+ * the faked up offset will fit
+ */
+
+#if BITS_PER_LONG == 64
 #define DRM_FILE_PAGE_OFFSET_START ((0xFFFFFFFFUL >> PAGE_SHIFT) + 1)
 #define DRM_FILE_PAGE_OFFSET_SIZE ((0xFFFFFFFFUL >> PAGE_SHIFT) * 16)
+#else
+#define DRM_FILE_PAGE_OFFSET_START ((0xFFFFFFFUL >> PAGE_SHIFT) + 1)
+#define DRM_FILE_PAGE_OFFSET_SIZE ((0xFFFFFFFUL >> PAGE_SHIFT) * 16)
+#endif
 
 /**
  * Initialize the GEM device fields
@@ -419,6 +429,7 @@ drm_gem_release(struct drm_device *dev, struct drm_file *file_private)
 	idr_for_each(&file_private->object_idr,
 		     &drm_gem_object_release_handle, NULL);
 
+	idr_remove_all(&file_private->object_idr);
 	idr_destroy(&file_private->object_idr);
 }
 
diff --git a/drivers/gpu/drm/ttm/ttm_global.c b/drivers/gpu/drm/drm_global.c
index b17007178a3..c87dc96444d 100644
--- a/drivers/gpu/drm/ttm/ttm_global.c
+++ b/drivers/gpu/drm/drm_global.c
@@ -28,45 +28,45 @@
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
 
-#include "ttm/ttm_module.h"
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include "drm_global.h"
 
-struct ttm_global_item {
+struct drm_global_item {
 	struct mutex mutex;
 	void *object;
 	int refcount;
 };
 
-static struct ttm_global_item glob[TTM_GLOBAL_NUM];
+static struct drm_global_item glob[DRM_GLOBAL_NUM];
 
-void ttm_global_init(void)
+void drm_global_init(void)
 {
 	int i;
 
-	for (i = 0; i < TTM_GLOBAL_NUM; ++i) {
-		struct ttm_global_item *item = &glob[i];
+	for (i = 0; i < DRM_GLOBAL_NUM; ++i) {
+		struct drm_global_item *item = &glob[i];
 		mutex_init(&item->mutex);
 		item->object = NULL;
 		item->refcount = 0;
 	}
 }
 
-void ttm_global_release(void)
+void drm_global_release(void)
 {
 	int i;
-	for (i = 0; i < TTM_GLOBAL_NUM; ++i) {
-		struct ttm_global_item *item = &glob[i];
+	for (i = 0; i < DRM_GLOBAL_NUM; ++i) {
+		struct drm_global_item *item = &glob[i];
 		BUG_ON(item->object != NULL);
 		BUG_ON(item->refcount != 0);
 	}
 }
 
-int ttm_global_item_ref(struct ttm_global_reference *ref)
+int drm_global_item_ref(struct drm_global_reference *ref)
 {
 	int ret;
-	struct ttm_global_item *item = &glob[ref->global_type];
+	struct drm_global_item *item = &glob[ref->global_type];
 	void *object;
 
 	mutex_lock(&item->mutex);
@@ -93,11 +93,11 @@ out_err:
 	item->object = NULL;
 	return ret;
 }
-EXPORT_SYMBOL(ttm_global_item_ref);
+EXPORT_SYMBOL(drm_global_item_ref);
 
-void ttm_global_item_unref(struct ttm_global_reference *ref)
+void drm_global_item_unref(struct drm_global_reference *ref)
 {
-	struct ttm_global_item *item = &glob[ref->global_type];
+	struct drm_global_item *item = &glob[ref->global_type];
 
 	mutex_lock(&item->mutex);
 	BUG_ON(item->refcount == 0);
@@ -108,5 +108,5 @@ void ttm_global_item_unref(struct ttm_global_reference *ref)
 	}
 	mutex_unlock(&item->mutex);
 }
-EXPORT_SYMBOL(ttm_global_item_unref);
+EXPORT_SYMBOL(drm_global_item_unref);
 
diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c
index f0f6c6b93f3..2ef2c782724 100644
--- a/drivers/gpu/drm/drm_info.c
+++ b/drivers/gpu/drm/drm_info.c
@@ -51,13 +51,24 @@ int drm_name_info(struct seq_file *m, void *data)
 	if (!master)
 		return 0;
 
-	if (master->unique) {
-		seq_printf(m, "%s %s %s\n",
-			   dev->driver->pci_driver.name,
-			   pci_name(dev->pdev), master->unique);
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE)) {
+		if (master->unique) {
+			seq_printf(m, "%s %s %s\n",
+					dev->driver->platform_device->name,
+					dev_name(dev->dev), master->unique);
+		} else {
+			seq_printf(m, "%s\n",
+				dev->driver->platform_device->name);
+		}
 	} else {
-		seq_printf(m, "%s %s\n", dev->driver->pci_driver.name,
-			   pci_name(dev->pdev));
+		if (master->unique) {
+			seq_printf(m, "%s %s %s\n",
+				dev->driver->pci_driver.name,
+				dev_name(dev->dev), master->unique);
+		} else {
+			seq_printf(m, "%s %s\n", dev->driver->pci_driver.name,
+				dev_name(dev->dev));
+		}
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/drm_ioctl.c b/drivers/gpu/drm/drm_ioctl.c
index 9b9ff46c237..7b03b197fc0 100644
--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -64,6 +64,19 @@ int drm_getunique(struct drm_device *dev, void *data,
 	return 0;
 }
 
+static void
+drm_unset_busid(struct drm_device *dev,
+		struct drm_master *master)
+{
+	kfree(dev->devname);
+	dev->devname = NULL;
+
+	kfree(master->unique);
+	master->unique = NULL;
+	master->unique_len = 0;
+	master->unique_size = 0;
+}
+
 /**
  * Set the bus id.
  *
@@ -94,17 +107,24 @@ int drm_setunique(struct drm_device *dev, void *data,
 	master->unique_len = u->unique_len;
 	master->unique_size = u->unique_len + 1;
 	master->unique = kmalloc(master->unique_size, GFP_KERNEL);
-	if (!master->unique)
-		return -ENOMEM;
-	if (copy_from_user(master->unique, u->unique, master->unique_len))
-		return -EFAULT;
+	if (!master->unique) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (copy_from_user(master->unique, u->unique, master->unique_len)) {
+		ret = -EFAULT;
+		goto err;
+	}
 
 	master->unique[master->unique_len] = '\0';
 
 	dev->devname = kmalloc(strlen(dev->driver->pci_driver.name) +
 			       strlen(master->unique) + 2, GFP_KERNEL);
-	if (!dev->devname)
-		return -ENOMEM;
+	if (!dev->devname) {
+		ret = -ENOMEM;
+		goto err;
+	}
 
 	sprintf(dev->devname, "%s@%s", dev->driver->pci_driver.name,
 		master->unique);
@@ -113,53 +133,103 @@ int drm_setunique(struct drm_device *dev, void *data,
 	 * busid.
 	 */
 	ret = sscanf(master->unique, "PCI:%d:%d:%d", &bus, &slot, &func);
-	if (ret != 3)
-		return -EINVAL;
+	if (ret != 3) {
+		ret = -EINVAL;
+		goto err;
+	}
+
 	domain = bus >> 8;
 	bus &= 0xff;
 
 	if ((domain != drm_get_pci_domain(dev)) ||
 	    (bus != dev->pdev->bus->number) ||
 	    (slot != PCI_SLOT(dev->pdev->devfn)) ||
-	    (func != PCI_FUNC(dev->pdev->devfn)))
-		return -EINVAL;
+	    (func != PCI_FUNC(dev->pdev->devfn))) {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	return 0;
+
+err:
+	drm_unset_busid(dev, master);
+	return ret;
 }
 
 static int drm_set_busid(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_master *master = file_priv->master;
-	int len;
+	int len, ret;
 
 	if (master->unique != NULL)
-		return -EBUSY;
+		drm_unset_busid(dev, master);
 
-	master->unique_len = 40;
-	master->unique_size = master->unique_len;
-	master->unique = kmalloc(master->unique_size, GFP_KERNEL);
-	if (master->unique == NULL)
-		return -ENOMEM;
-
-	len = snprintf(master->unique, master->unique_len, "pci:%04x:%02x:%02x.%d",
-		       drm_get_pci_domain(dev),
-		       dev->pdev->bus->number,
-		       PCI_SLOT(dev->pdev->devfn),
-		       PCI_FUNC(dev->pdev->devfn));
-	if (len >= master->unique_len)
-		DRM_ERROR("buffer overflow");
-	else
-		master->unique_len = len;
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE)) {
+		master->unique_len = 10 + strlen(dev->platformdev->name);
+		master->unique = kmalloc(master->unique_len + 1, GFP_KERNEL);
 
-	dev->devname = kmalloc(strlen(dev->driver->pci_driver.name) +
-			       master->unique_len + 2, GFP_KERNEL);
-	if (dev->devname == NULL)
-		return -ENOMEM;
+		if (master->unique == NULL)
+			return -ENOMEM;
 
-	sprintf(dev->devname, "%s@%s", dev->driver->pci_driver.name,
-		master->unique);
+		len = snprintf(master->unique, master->unique_len,
+			"platform:%s", dev->platformdev->name);
+
+		if (len > master->unique_len) {
+			DRM_ERROR("Unique buffer overflowed\n");
+			ret = -EINVAL;
+			goto err;
+		}
+
+		dev->devname =
+			kmalloc(strlen(dev->platformdev->name) +
+				master->unique_len + 2, GFP_KERNEL);
+
+		if (dev->devname == NULL) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		sprintf(dev->devname, "%s@%s", dev->platformdev->name,
+			master->unique);
+
+	} else {
+		master->unique_len = 40;
+		master->unique_size = master->unique_len;
+		master->unique = kmalloc(master->unique_size, GFP_KERNEL);
+		if (master->unique == NULL)
+			return -ENOMEM;
+
+		len = snprintf(master->unique, master->unique_len,
+			"pci:%04x:%02x:%02x.%d",
+			drm_get_pci_domain(dev),
+			dev->pdev->bus->number,
+			PCI_SLOT(dev->pdev->devfn),
+			PCI_FUNC(dev->pdev->devfn));
+		if (len >= master->unique_len) {
+			DRM_ERROR("buffer overflow");
+			ret = -EINVAL;
+			goto err;
+		} else
+			master->unique_len = len;
+
+		dev->devname =
+			kmalloc(strlen(dev->driver->pci_driver.name) +
+				master->unique_len + 2, GFP_KERNEL);
+
+		if (dev->devname == NULL) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		sprintf(dev->devname, "%s@%s", dev->driver->pci_driver.name,
+			master->unique);
+	}
 
 	return 0;
+
+err:
+	drm_unset_busid(dev, master);
+	return ret;
 }
 
 /**
@@ -323,7 +393,9 @@ int drm_setversion(struct drm_device *dev, void *data, struct drm_file *file_pri
 			/*
 			 * Version 1.1 includes tying of DRM to specific device
 			 */
-			drm_set_busid(dev, file_priv);
+			retcode = drm_set_busid(dev, file_priv);
+			if (retcode)
+				goto done;
 		}
 	}
 
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index a263b7070fc..9d3a5030b6e 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -34,6 +34,7 @@
  */
 
 #include "drmP.h"
+#include "drm_trace.h"
 
 #include <linux/interrupt.h>	/* For task queue support */
 #include <linux/slab.h>
@@ -57,6 +58,9 @@ int drm_irq_by_busid(struct drm_device *dev, void *data,
 {
 	struct drm_irq_busid *p = data;
 
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+		return -EINVAL;
+
 	if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 		return -EINVAL;
 
@@ -211,7 +215,7 @@ int drm_irq_install(struct drm_device *dev)
 	if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
 		return -EINVAL;
 
-	if (dev->pdev->irq == 0)
+	if (drm_dev_to_irq(dev) == 0)
 		return -EINVAL;
 
 	mutex_lock(&dev->struct_mutex);
@@ -229,7 +233,7 @@ int drm_irq_install(struct drm_device *dev)
 	dev->irq_enabled = 1;
 	mutex_unlock(&dev->struct_mutex);
 
-	DRM_DEBUG("irq=%d\n", dev->pdev->irq);
+	DRM_DEBUG("irq=%d\n", drm_dev_to_irq(dev));
 
 	/* Before installing handler */
 	dev->driver->irq_preinstall(dev);
@@ -302,14 +306,14 @@ int drm_irq_uninstall(struct drm_device * dev)
 	if (!irq_enabled)
 		return -EINVAL;
 
-	DRM_DEBUG("irq=%d\n", dev->pdev->irq);
+	DRM_DEBUG("irq=%d\n", drm_dev_to_irq(dev));
 
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		vga_client_register(dev->pdev, NULL, NULL, NULL);
 
 	dev->driver->irq_uninstall(dev);
 
-	free_irq(dev->pdev->irq, dev);
+	free_irq(drm_dev_to_irq(dev), dev);
 
 	return 0;
 }
@@ -341,7 +345,7 @@ int drm_control(struct drm_device *dev, void *data,
 		if (drm_core_check_feature(dev, DRIVER_MODESET))
 			return 0;
 		if (dev->if_version < DRM_IF_VERSION(1, 2) &&
-		    ctl->irq != dev->pdev->irq)
+		    ctl->irq != drm_dev_to_irq(dev))
 			return -EINVAL;
 		return drm_irq_install(dev);
 	case DRM_UNINST_HANDLER:
@@ -587,6 +591,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 		return -ENOMEM;
 
 	e->pipe = pipe;
+	e->base.pid = current->pid;
 	e->event.base.type = DRM_EVENT_VBLANK;
 	e->event.base.length = sizeof e->event;
 	e->event.user_data = vblwait->request.signal;
@@ -614,6 +619,9 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	DRM_DEBUG("event on vblank count %d, current %d, crtc %d\n",
 		  vblwait->request.sequence, seq, pipe);
 
+	trace_drm_vblank_event_queued(current->pid, pipe,
+				      vblwait->request.sequence);
+
 	e->event.sequence = vblwait->request.sequence;
 	if ((seq - vblwait->request.sequence) <= (1 << 23)) {
 		e->event.tv_sec = now.tv_sec;
@@ -621,6 +629,8 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 		drm_vblank_put(dev, e->pipe);
 		list_add_tail(&e->base.link, &e->base.file_priv->event_list);
 		wake_up_interruptible(&e->base.file_priv->event_wait);
+		trace_drm_vblank_event_delivered(current->pid, pipe,
+						 vblwait->request.sequence);
 	} else {
 		list_add_tail(&e->base.link, &dev->vblank_event_list);
 	}
@@ -651,7 +661,7 @@ int drm_wait_vblank(struct drm_device *dev, void *data,
 	int ret = 0;
 	unsigned int flags, seq, crtc;
 
-	if ((!dev->pdev->irq) || (!dev->irq_enabled))
+	if ((!drm_dev_to_irq(dev)) || (!dev->irq_enabled))
 		return -EINVAL;
 
 	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
@@ -751,9 +761,13 @@ void drm_handle_vblank_events(struct drm_device *dev, int crtc)
 		drm_vblank_put(dev, e->pipe);
 		list_move_tail(&e->base.link, &e->base.file_priv->event_list);
 		wake_up_interruptible(&e->base.file_priv->event_wait);
+		trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
+						 e->event.sequence);
 	}
 
 	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	trace_drm_vblank_event(crtc, seq);
 }
 
 /**
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index 2ac074c8f5d..da99edc5088 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -48,44 +48,14 @@
 
 #define MM_UNUSED_TARGET 4
 
-unsigned long drm_mm_tail_space(struct drm_mm *mm)
-{
-	struct list_head *tail_node;
-	struct drm_mm_node *entry;
-
-	tail_node = mm->ml_entry.prev;
-	entry = list_entry(tail_node, struct drm_mm_node, ml_entry);
-	if (!entry->free)
-		return 0;
-
-	return entry->size;
-}
-
-int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size)
-{
-	struct list_head *tail_node;
-	struct drm_mm_node *entry;
-
-	tail_node = mm->ml_entry.prev;
-	entry = list_entry(tail_node, struct drm_mm_node, ml_entry);
-	if (!entry->free)
-		return -ENOMEM;
-
-	if (entry->size <= size)
-		return -ENOMEM;
-
-	entry->size -= size;
-	return 0;
-}
-
 static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic)
 {
 	struct drm_mm_node *child;
 
 	if (atomic)
-		child = kmalloc(sizeof(*child), GFP_ATOMIC);
+		child = kzalloc(sizeof(*child), GFP_ATOMIC);
 	else
-		child = kmalloc(sizeof(*child), GFP_KERNEL);
+		child = kzalloc(sizeof(*child), GFP_KERNEL);
 
 	if (unlikely(child == NULL)) {
 		spin_lock(&mm->unused_lock);
@@ -94,8 +64,8 @@ static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic)
 		else {
 			child =
 			    list_entry(mm->unused_nodes.next,
-				       struct drm_mm_node, fl_entry);
-			list_del(&child->fl_entry);
+				       struct drm_mm_node, free_stack);
+			list_del(&child->free_stack);
 			--mm->num_unused;
 		}
 		spin_unlock(&mm->unused_lock);
@@ -115,7 +85,7 @@ int drm_mm_pre_get(struct drm_mm *mm)
 	spin_lock(&mm->unused_lock);
 	while (mm->num_unused < MM_UNUSED_TARGET) {
 		spin_unlock(&mm->unused_lock);
-		node = kmalloc(sizeof(*node), GFP_KERNEL);
+		node = kzalloc(sizeof(*node), GFP_KERNEL);
 		spin_lock(&mm->unused_lock);
 
 		if (unlikely(node == NULL)) {
@@ -124,7 +94,7 @@ int drm_mm_pre_get(struct drm_mm *mm)
 			return ret;
 		}
 		++mm->num_unused;
-		list_add_tail(&node->fl_entry, &mm->unused_nodes);
+		list_add_tail(&node->free_stack, &mm->unused_nodes);
 	}
 	spin_unlock(&mm->unused_lock);
 	return 0;
@@ -146,27 +116,12 @@ static int drm_mm_create_tail_node(struct drm_mm *mm,
 	child->start = start;
 	child->mm = mm;
 
-	list_add_tail(&child->ml_entry, &mm->ml_entry);
-	list_add_tail(&child->fl_entry, &mm->fl_entry);
+	list_add_tail(&child->node_list, &mm->node_list);
+	list_add_tail(&child->free_stack, &mm->free_stack);
 
 	return 0;
 }
 
-int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size, int atomic)
-{
-	struct list_head *tail_node;
-	struct drm_mm_node *entry;
-
-	tail_node = mm->ml_entry.prev;
-	entry = list_entry(tail_node, struct drm_mm_node, ml_entry);
-	if (!entry->free) {
-		return drm_mm_create_tail_node(mm, entry->start + entry->size,
-					       size, atomic);
-	}
-	entry->size += size;
-	return 0;
-}
-
 static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
 						 unsigned long size,
 						 int atomic)
@@ -177,15 +132,14 @@ static struct drm_mm_node *drm_mm_split_at_start(struct drm_mm_node *parent,
 	if (unlikely(child == NULL))
 		return NULL;
 
-	INIT_LIST_HEAD(&child->fl_entry);
+	INIT_LIST_HEAD(&child->free_stack);
 
-	child->free = 0;
 	child->size = size;
 	child->start = parent->start;
 	child->mm = parent->mm;
 
-	list_add_tail(&child->ml_entry, &parent->ml_entry);
-	INIT_LIST_HEAD(&child->fl_entry);
+	list_add_tail(&child->node_list, &parent->node_list);
+	INIT_LIST_HEAD(&child->free_stack);
 
 	parent->size -= size;
 	parent->start += size;
@@ -213,7 +167,7 @@ struct drm_mm_node *drm_mm_get_block_generic(struct drm_mm_node *node,
 	}
 
 	if (node->size == size) {
-		list_del_init(&node->fl_entry);
+		list_del_init(&node->free_stack);
 		node->free = 0;
 	} else {
 		node = drm_mm_split_at_start(node, size, atomic);
@@ -251,7 +205,7 @@ struct drm_mm_node *drm_mm_get_block_range_generic(struct drm_mm_node *node,
 	}
 
 	if (node->size == size) {
-		list_del_init(&node->fl_entry);
+		list_del_init(&node->free_stack);
 		node->free = 0;
 	} else {
 		node = drm_mm_split_at_start(node, size, atomic);
@@ -273,16 +227,19 @@ void drm_mm_put_block(struct drm_mm_node *cur)
 {
 
 	struct drm_mm *mm = cur->mm;
-	struct list_head *cur_head = &cur->ml_entry;
-	struct list_head *root_head = &mm->ml_entry;
+	struct list_head *cur_head = &cur->node_list;
+	struct list_head *root_head = &mm->node_list;
 	struct drm_mm_node *prev_node = NULL;
 	struct drm_mm_node *next_node;
 
 	int merged = 0;
 
+	BUG_ON(cur->scanned_block || cur->scanned_prev_free
+				  || cur->scanned_next_free);
+
 	if (cur_head->prev != root_head) {
 		prev_node =
-		    list_entry(cur_head->prev, struct drm_mm_node, ml_entry);
+		    list_entry(cur_head->prev, struct drm_mm_node, node_list);
 		if (prev_node->free) {
 			prev_node->size += cur->size;
 			merged = 1;
@@ -290,15 +247,15 @@ void drm_mm_put_block(struct drm_mm_node *cur)
 	}
 	if (cur_head->next != root_head) {
 		next_node =
-		    list_entry(cur_head->next, struct drm_mm_node, ml_entry);
+		    list_entry(cur_head->next, struct drm_mm_node, node_list);
 		if (next_node->free) {
 			if (merged) {
 				prev_node->size += next_node->size;
-				list_del(&next_node->ml_entry);
-				list_del(&next_node->fl_entry);
+				list_del(&next_node->node_list);
+				list_del(&next_node->free_stack);
 				spin_lock(&mm->unused_lock);
 				if (mm->num_unused < MM_UNUSED_TARGET) {
-					list_add(&next_node->fl_entry,
+					list_add(&next_node->free_stack,
 						 &mm->unused_nodes);
 					++mm->num_unused;
 				} else
@@ -313,12 +270,12 @@ void drm_mm_put_block(struct drm_mm_node *cur)
 	}
 	if (!merged) {
 		cur->free = 1;
-		list_add(&cur->fl_entry, &mm->fl_entry);
+		list_add(&cur->free_stack, &mm->free_stack);
 	} else {
-		list_del(&cur->ml_entry);
+		list_del(&cur->node_list);
 		spin_lock(&mm->unused_lock);
 		if (mm->num_unused < MM_UNUSED_TARGET) {
-			list_add(&cur->fl_entry, &mm->unused_nodes);
+			list_add(&cur->free_stack, &mm->unused_nodes);
 			++mm->num_unused;
 		} else
 			kfree(cur);
@@ -328,40 +285,50 @@ void drm_mm_put_block(struct drm_mm_node *cur)
 
 EXPORT_SYMBOL(drm_mm_put_block);
 
+static int check_free_mm_node(struct drm_mm_node *entry, unsigned long size,
+			      unsigned alignment)
+{
+	unsigned wasted = 0;
+
+	if (entry->size < size)
+		return 0;
+
+	if (alignment) {
+		register unsigned tmp = entry->start % alignment;
+		if (tmp)
+			wasted = alignment - tmp;
+	}
+
+	if (entry->size >= size + wasted) {
+		return 1;
+	}
+
+	return 0;
+}
+
 struct drm_mm_node *drm_mm_search_free(const struct drm_mm *mm,
 				       unsigned long size,
 				       unsigned alignment, int best_match)
 {
-	struct list_head *list;
-	const struct list_head *free_stack = &mm->fl_entry;
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
 	unsigned long best_size;
-	unsigned wasted;
+
+	BUG_ON(mm->scanned_blocks);
 
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each(list, free_stack) {
-		entry = list_entry(list, struct drm_mm_node, fl_entry);
-		wasted = 0;
-
-		if (entry->size < size)
+	list_for_each_entry(entry, &mm->free_stack, free_stack) {
+		if (!check_free_mm_node(entry, size, alignment))
 			continue;
 
-		if (alignment) {
-			register unsigned tmp = entry->start % alignment;
-			if (tmp)
-				wasted += alignment - tmp;
-		}
+		if (!best_match)
+			return entry;
 
-		if (entry->size >= size + wasted) {
-			if (!best_match)
-				return entry;
-			if (entry->size < best_size) {
-				best = entry;
-				best_size = entry->size;
-			}
+		if (entry->size < best_size) {
+			best = entry;
+			best_size = entry->size;
 		}
 	}
 
@@ -376,43 +343,28 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm,
 						unsigned long end,
 						int best_match)
 {
-	struct list_head *list;
-	const struct list_head *free_stack = &mm->fl_entry;
 	struct drm_mm_node *entry;
 	struct drm_mm_node *best;
 	unsigned long best_size;
-	unsigned wasted;
+
+	BUG_ON(mm->scanned_blocks);
 
 	best = NULL;
 	best_size = ~0UL;
 
-	list_for_each(list, free_stack) {
-		entry = list_entry(list, struct drm_mm_node, fl_entry);
-		wasted = 0;
-
-		if (entry->size < size)
-			continue;
-
+	list_for_each_entry(entry, &mm->free_stack, free_stack) {
 		if (entry->start > end || (entry->start+entry->size) < start)
 			continue;
 
-		if (entry->start < start)
-			wasted += start - entry->start;
+		if (!check_free_mm_node(entry, size, alignment))
+			continue;
 
-		if (alignment) {
-			register unsigned tmp = (entry->start + wasted) % alignment;
-			if (tmp)
-				wasted += alignment - tmp;
-		}
+		if (!best_match)
+			return entry;
 
-		if (entry->size >= size + wasted &&
-		    (entry->start + wasted + size) <= end) {
-			if (!best_match)
-				return entry;
-			if (entry->size < best_size) {
-				best = entry;
-				best_size = entry->size;
-			}
+		if (entry->size < best_size) {
+			best = entry;
+			best_size = entry->size;
 		}
 	}
 
@@ -420,9 +372,161 @@ struct drm_mm_node *drm_mm_search_free_in_range(const struct drm_mm *mm,
 }
 EXPORT_SYMBOL(drm_mm_search_free_in_range);
 
+/**
+ * Initializa lru scanning.
+ *
+ * This simply sets up the scanning routines with the parameters for the desired
+ * hole.
+ *
+ * Warning: As long as the scan list is non-empty, no other operations than
+ * adding/removing nodes to/from the scan list are allowed.
+ */
+void drm_mm_init_scan(struct drm_mm *mm, unsigned long size,
+		      unsigned alignment)
+{
+	mm->scan_alignment = alignment;
+	mm->scan_size = size;
+	mm->scanned_blocks = 0;
+	mm->scan_hit_start = 0;
+	mm->scan_hit_size = 0;
+}
+EXPORT_SYMBOL(drm_mm_init_scan);
+
+/**
+ * Add a node to the scan list that might be freed to make space for the desired
+ * hole.
+ *
+ * Returns non-zero, if a hole has been found, zero otherwise.
+ */
+int drm_mm_scan_add_block(struct drm_mm_node *node)
+{
+	struct drm_mm *mm = node->mm;
+	struct list_head *prev_free, *next_free;
+	struct drm_mm_node *prev_node, *next_node;
+
+	mm->scanned_blocks++;
+
+	prev_free = next_free = NULL;
+
+	BUG_ON(node->free);
+	node->scanned_block = 1;
+	node->free = 1;
+
+	if (node->node_list.prev != &mm->node_list) {
+		prev_node = list_entry(node->node_list.prev, struct drm_mm_node,
+				       node_list);
+
+		if (prev_node->free) {
+			list_del(&prev_node->node_list);
+
+			node->start = prev_node->start;
+			node->size += prev_node->size;
+
+			prev_node->scanned_prev_free = 1;
+
+			prev_free = &prev_node->free_stack;
+		}
+	}
+
+	if (node->node_list.next != &mm->node_list) {
+		next_node = list_entry(node->node_list.next, struct drm_mm_node,
+				       node_list);
+
+		if (next_node->free) {
+			list_del(&next_node->node_list);
+
+			node->size += next_node->size;
+
+			next_node->scanned_next_free = 1;
+
+			next_free = &next_node->free_stack;
+		}
+	}
+
+	/* The free_stack list is not used for allocated objects, so these two
+	 * pointers can be abused (as long as no allocations in this memory
+	 * manager happens). */
+	node->free_stack.prev = prev_free;
+	node->free_stack.next = next_free;
+
+	if (check_free_mm_node(node, mm->scan_size, mm->scan_alignment)) {
+		mm->scan_hit_start = node->start;
+		mm->scan_hit_size = node->size;
+
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mm_scan_add_block);
+
+/**
+ * Remove a node from the scan list.
+ *
+ * Nodes _must_ be removed in the exact same order from the scan list as they
+ * have been added, otherwise the internal state of the memory manager will be
+ * corrupted.
+ *
+ * When the scan list is empty, the selected memory nodes can be freed. An
+ * immediatly following drm_mm_search_free with best_match = 0 will then return
+ * the just freed block (because its at the top of the free_stack list).
+ *
+ * Returns one if this block should be evicted, zero otherwise. Will always
+ * return zero when no hole has been found.
+ */
+int drm_mm_scan_remove_block(struct drm_mm_node *node)
+{
+	struct drm_mm *mm = node->mm;
+	struct drm_mm_node *prev_node, *next_node;
+
+	mm->scanned_blocks--;
+
+	BUG_ON(!node->scanned_block);
+	node->scanned_block = 0;
+	node->free = 0;
+
+	prev_node = list_entry(node->free_stack.prev, struct drm_mm_node,
+			       free_stack);
+	next_node = list_entry(node->free_stack.next, struct drm_mm_node,
+			       free_stack);
+
+	if (prev_node) {
+		BUG_ON(!prev_node->scanned_prev_free);
+		prev_node->scanned_prev_free = 0;
+
+		list_add_tail(&prev_node->node_list, &node->node_list);
+
+		node->start = prev_node->start + prev_node->size;
+		node->size -= prev_node->size;
+	}
+
+	if (next_node) {
+		BUG_ON(!next_node->scanned_next_free);
+		next_node->scanned_next_free = 0;
+
+		list_add(&next_node->node_list, &node->node_list);
+
+		node->size -= next_node->size;
+	}
+
+	INIT_LIST_HEAD(&node->free_stack);
+
+	/* Only need to check for containement because start&size for the
+	 * complete resulting free block (not just the desired part) is
+	 * stored. */
+	if (node->start >= mm->scan_hit_start &&
+	    node->start + node->size
+	    		<= mm->scan_hit_start + mm->scan_hit_size) {
+		return 1;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_mm_scan_remove_block);
+
 int drm_mm_clean(struct drm_mm * mm)
 {
-	struct list_head *head = &mm->ml_entry;
+	struct list_head *head = &mm->node_list;
 
 	return (head->next->next == head);
 }
@@ -430,10 +534,11 @@ EXPORT_SYMBOL(drm_mm_clean);
 
 int drm_mm_init(struct drm_mm * mm, unsigned long start, unsigned long size)
 {
-	INIT_LIST_HEAD(&mm->ml_entry);
-	INIT_LIST_HEAD(&mm->fl_entry);
+	INIT_LIST_HEAD(&mm->node_list);
+	INIT_LIST_HEAD(&mm->free_stack);
 	INIT_LIST_HEAD(&mm->unused_nodes);
 	mm->num_unused = 0;
+	mm->scanned_blocks = 0;
 	spin_lock_init(&mm->unused_lock);
 
 	return drm_mm_create_tail_node(mm, start, size, 0);
@@ -442,25 +547,25 @@ EXPORT_SYMBOL(drm_mm_init);
 
 void drm_mm_takedown(struct drm_mm * mm)
 {
-	struct list_head *bnode = mm->fl_entry.next;
+	struct list_head *bnode = mm->free_stack.next;
 	struct drm_mm_node *entry;
 	struct drm_mm_node *next;
 
-	entry = list_entry(bnode, struct drm_mm_node, fl_entry);
+	entry = list_entry(bnode, struct drm_mm_node, free_stack);
 
-	if (entry->ml_entry.next != &mm->ml_entry ||
-	    entry->fl_entry.next != &mm->fl_entry) {
+	if (entry->node_list.next != &mm->node_list ||
+	    entry->free_stack.next != &mm->free_stack) {
 		DRM_ERROR("Memory manager not clean. Delaying takedown\n");
 		return;
 	}
 
-	list_del(&entry->fl_entry);
-	list_del(&entry->ml_entry);
+	list_del(&entry->free_stack);
+	list_del(&entry->node_list);
 	kfree(entry);
 
 	spin_lock(&mm->unused_lock);
-	list_for_each_entry_safe(entry, next, &mm->unused_nodes, fl_entry) {
-		list_del(&entry->fl_entry);
+	list_for_each_entry_safe(entry, next, &mm->unused_nodes, free_stack) {
+		list_del(&entry->free_stack);
 		kfree(entry);
 		--mm->num_unused;
 	}
@@ -475,7 +580,7 @@ void drm_mm_debug_table(struct drm_mm *mm, const char *prefix)
 	struct drm_mm_node *entry;
 	int total_used = 0, total_free = 0, total = 0;
 
-	list_for_each_entry(entry, &mm->ml_entry, ml_entry) {
+	list_for_each_entry(entry, &mm->node_list, node_list) {
 		printk(KERN_DEBUG "%s 0x%08lx-0x%08lx: %8ld: %s\n",
 			prefix, entry->start, entry->start + entry->size,
 			entry->size, entry->free ? "free" : "used");
@@ -496,7 +601,7 @@ int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
 	struct drm_mm_node *entry;
 	int total_used = 0, total_free = 0, total = 0;
 
-	list_for_each_entry(entry, &mm->ml_entry, ml_entry) {
+	list_for_each_entry(entry, &mm->node_list, node_list) {
 		seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: %s\n", entry->start, entry->start + entry->size, entry->size, entry->free ? "free" : "used");
 		total += entry->size;
 		if (entry->free)
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index 2ea9ad4a8d6..e20f78b542a 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -124,4 +124,147 @@ void drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
 
 EXPORT_SYMBOL(drm_pci_free);
 
+#ifdef CONFIG_PCI
+/**
+ * Register.
+ *
+ * \param pdev - PCI device structure
+ * \param ent entry from the PCI ID table with device type flags
+ * \return zero on success or a negative number on failure.
+ *
+ * Attempt to gets inter module "drm" information. If we are first
+ * then register the character device and inter module information.
+ * Try and register, if we fail to register, backout previous work.
+ */
+int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
+		    struct drm_driver *driver)
+{
+	struct drm_device *dev;
+	int ret;
+
+	DRM_DEBUG("\n");
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto err_g1;
+
+	pci_set_master(pdev);
+
+	dev->pdev = pdev;
+	dev->dev = &pdev->dev;
+
+	dev->pci_device = pdev->device;
+	dev->pci_vendor = pdev->vendor;
+
+#ifdef __alpha__
+	dev->hose = pdev->sysdata;
+#endif
+
+	if ((ret = drm_fill_in_dev(dev, ent, driver))) {
+		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
+		goto err_g2;
+	}
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		pci_set_drvdata(pdev, dev);
+		ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
+		if (ret)
+			goto err_g2;
+	}
+
+	if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY)))
+		goto err_g3;
+
+	if (dev->driver->load) {
+		ret = dev->driver->load(dev, ent->driver_data);
+		if (ret)
+			goto err_g4;
+	}
+
+	/* setup the grouping for the legacy output */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_mode_group_init_legacy_group(dev,
+						&dev->primary->mode_group);
+		if (ret)
+			goto err_g4;
+	}
+
+	list_add_tail(&dev->driver_item, &driver->device_list);
+
+	DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n",
+		 driver->name, driver->major, driver->minor, driver->patchlevel,
+		 driver->date, pci_name(pdev), dev->primary->index);
+
+	return 0;
+
+err_g4:
+	drm_put_minor(&dev->primary);
+err_g3:
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_put_minor(&dev->control);
+err_g2:
+	pci_disable_device(pdev);
+err_g1:
+	kfree(dev);
+	return ret;
+}
+EXPORT_SYMBOL(drm_get_pci_dev);
+
+/**
+ * PCI device initialization. Called via drm_init at module load time,
+ *
+ * \return zero on success or a negative number on failure.
+ *
+ * Initializes a drm_device structures,registering the
+ * stubs and initializing the AGP device.
+ *
+ * Expands the \c DRIVER_PREINIT and \c DRIVER_POST_INIT macros before and
+ * after the initialization for driver customization.
+ */
+int drm_pci_init(struct drm_driver *driver)
+{
+	struct pci_dev *pdev = NULL;
+	const struct pci_device_id *pid;
+	int i;
+
+	if (driver->driver_features & DRIVER_MODESET)
+		return pci_register_driver(&driver->pci_driver);
+
+	/* If not using KMS, fall back to stealth mode manual scanning. */
+	for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) {
+		pid = &driver->pci_driver.id_table[i];
+
+		/* Loop around setting up a DRM device for each PCI device
+		 * matching our ID and device class.  If we had the internal
+		 * function that pci_get_subsys and pci_get_class used, we'd
+		 * be able to just pass pid in instead of doing a two-stage
+		 * thing.
+		 */
+		pdev = NULL;
+		while ((pdev =
+			pci_get_subsys(pid->vendor, pid->device, pid->subvendor,
+				       pid->subdevice, pdev)) != NULL) {
+			if ((pdev->class & pid->class_mask) != pid->class)
+				continue;
+
+			/* stealth mode requires a manual probe */
+			pci_dev_get(pdev);
+			drm_get_pci_dev(pdev, pid, driver);
+		}
+	}
+	return 0;
+}
+
+#else
+
+int drm_pci_init(struct drm_driver *driver)
+{
+	return -1;
+}
+
+#endif
 /*@}*/
diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c
new file mode 100644
index 00000000000..460e9a3afa8
--- /dev/null
+++ b/drivers/gpu/drm/drm_platform.c
@@ -0,0 +1,122 @@
+/*
+ * Derived from drm_pci.c
+ *
+ * Copyright 2003 José Fonseca.
+ * Copyright 2003 Leif Delgass.
+ * Copyright (c) 2009, Code Aurora Forum.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+ * AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "drmP.h"
+
+/**
+ * Register.
+ *
+ * \param platdev - Platform device struture
+ * \return zero on success or a negative number on failure.
+ *
+ * Attempt to gets inter module "drm" information. If we are first
+ * then register the character device and inter module information.
+ * Try and register, if we fail to register, backout previous work.
+ */
+
+int drm_get_platform_dev(struct platform_device *platdev,
+			 struct drm_driver *driver)
+{
+	struct drm_device *dev;
+	int ret;
+
+	DRM_DEBUG("\n");
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->platformdev = platdev;
+	dev->dev = &platdev->dev;
+
+	ret = drm_fill_in_dev(dev, NULL, driver);
+
+	if (ret) {
+		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
+		goto err_g1;
+	}
+
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		dev_set_drvdata(&platdev->dev, dev);
+		ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
+		if (ret)
+			goto err_g1;
+	}
+
+	ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY);
+	if (ret)
+		goto err_g2;
+
+	if (dev->driver->load) {
+		ret = dev->driver->load(dev, 0);
+		if (ret)
+			goto err_g3;
+	}
+
+	/* setup the grouping for the legacy output */
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = drm_mode_group_init_legacy_group(dev,
+				&dev->primary->mode_group);
+		if (ret)
+			goto err_g3;
+	}
+
+	list_add_tail(&dev->driver_item, &driver->device_list);
+
+	DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
+		 driver->name, driver->major, driver->minor, driver->patchlevel,
+		 driver->date, dev->primary->index);
+
+	return 0;
+
+err_g3:
+	drm_put_minor(&dev->primary);
+err_g2:
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		drm_put_minor(&dev->control);
+err_g1:
+	kfree(dev);
+	return ret;
+}
+EXPORT_SYMBOL(drm_get_platform_dev);
+
+/**
+ * Platform device initialization. Called via drm_init at module load time,
+ *
+ * \return zero on success or a negative number on failure.
+ *
+ * Initializes a drm_device structures,registering the
+ * stubs
+ *
+ * Expands the \c DRIVER_PREINIT and \c DRIVER_POST_INIT macros before and
+ * after the initialization for driver customization.
+ */
+
+int drm_platform_init(struct drm_driver *driver)
+{
+	return drm_get_platform_dev(driver->platform_device, driver);
+}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index a0c365f2e52..d1ad57450df 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -156,6 +156,9 @@ static void drm_master_destroy(struct kref *kref)
 		master->unique_len = 0;
 	}
 
+	kfree(dev->devname);
+	dev->devname = NULL;
+
 	list_for_each_entry_safe(pt, next, &master->magicfree, head) {
 		list_del(&pt->head);
 		drm_ht_remove_item(&master->magiclist, &pt->hash_item);
@@ -224,7 +227,7 @@ int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 	return 0;
 }
 
-static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev,
+int drm_fill_in_dev(struct drm_device *dev,
 			   const struct pci_device_id *ent,
 			   struct drm_driver *driver)
 {
@@ -245,14 +248,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev,
 
 	idr_init(&dev->drw_idr);
 
-	dev->pdev = pdev;
-	dev->pci_device = pdev->device;
-	dev->pci_vendor = pdev->vendor;
-
-#ifdef __alpha__
-	dev->hose = pdev->sysdata;
-#endif
-
 	if (drm_ht_create(&dev->map_hash, 12)) {
 		return -ENOMEM;
 	}
@@ -321,7 +316,7 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev,
  * create the proc init entry via proc_init(). This routines assigns
  * minor numbers to secondary heads of multi-headed cards
  */
-static int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int type)
+int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int type)
 {
 	struct drm_minor *new_minor;
 	int ret;
@@ -388,83 +383,6 @@ err_idr:
 }
 
 /**
- * Register.
- *
- * \param pdev - PCI device structure
- * \param ent entry from the PCI ID table with device type flags
- * \return zero on success or a negative number on failure.
- *
- * Attempt to gets inter module "drm" information. If we are first
- * then register the character device and inter module information.
- * Try and register, if we fail to register, backout previous work.
- */
-int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
-		struct drm_driver *driver)
-{
-	struct drm_device *dev;
-	int ret;
-
-	DRM_DEBUG("\n");
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto err_g1;
-
-	pci_set_master(pdev);
-	if ((ret = drm_fill_in_dev(dev, pdev, ent, driver))) {
-		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
-		goto err_g2;
-	}
-
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		pci_set_drvdata(pdev, dev);
-		ret = drm_get_minor(dev, &dev->control, DRM_MINOR_CONTROL);
-		if (ret)
-			goto err_g2;
-	}
-
-	if ((ret = drm_get_minor(dev, &dev->primary, DRM_MINOR_LEGACY)))
-		goto err_g3;
-
-	if (dev->driver->load) {
-		ret = dev->driver->load(dev, ent->driver_data);
-		if (ret)
-			goto err_g4;
-	}
-
-        /* setup the grouping for the legacy output */
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
-		if (ret)
-			goto err_g4;
-	}
-
-	list_add_tail(&dev->driver_item, &driver->device_list);
-
-	DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n",
-		 driver->name, driver->major, driver->minor, driver->patchlevel,
-		 driver->date, pci_name(pdev), dev->primary->index);
-
-	return 0;
-
-err_g4:
-	drm_put_minor(&dev->primary);
-err_g3:
-	if (drm_core_check_feature(dev, DRIVER_MODESET))
-		drm_put_minor(&dev->control);
-err_g2:
-	pci_disable_device(pdev);
-err_g1:
-	kfree(dev);
-	return ret;
-}
-EXPORT_SYMBOL(drm_get_dev);
-
-/**
  * Put a secondary minor number.
  *
  * \param sec_minor - structure to be released
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 101d381e9d8..86118a74223 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -489,7 +489,8 @@ int drm_sysfs_device_add(struct drm_minor *minor)
 	int err;
 	char *minor_str;
 
-	minor->kdev.parent = &minor->dev->pdev->dev;
+	minor->kdev.parent = minor->dev->dev;
+
 	minor->kdev.class = drm_class;
 	minor->kdev.release = drm_sysfs_device_release;
 	minor->kdev.devt = minor->device;
diff --git a/drivers/gpu/drm/drm_trace.h b/drivers/gpu/drm/drm_trace.h
new file mode 100644
index 00000000000..03ea964aa60
--- /dev/null
+++ b/drivers/gpu/drm/drm_trace.h
@@ -0,0 +1,66 @@
+#if !defined(_DRM_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _DRM_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM drm
+#define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM)
+#define TRACE_INCLUDE_FILE drm_trace
+
+TRACE_EVENT(drm_vblank_event,
+	    TP_PROTO(int crtc, unsigned int seq),
+	    TP_ARGS(crtc, seq),
+	    TP_STRUCT__entry(
+		    __field(int, crtc)
+		    __field(unsigned int, seq)
+		    ),
+	    TP_fast_assign(
+		    __entry->crtc = crtc;
+		    __entry->seq = seq;
+		    ),
+	    TP_printk("crtc=%d, seq=%d", __entry->crtc, __entry->seq)
+);
+
+TRACE_EVENT(drm_vblank_event_queued,
+	    TP_PROTO(pid_t pid, int crtc, unsigned int seq),
+	    TP_ARGS(pid, crtc, seq),
+	    TP_STRUCT__entry(
+		    __field(pid_t, pid)
+		    __field(int, crtc)
+		    __field(unsigned int, seq)
+		    ),
+	    TP_fast_assign(
+		    __entry->pid = pid;
+		    __entry->crtc = crtc;
+		    __entry->seq = seq;
+		    ),
+	    TP_printk("pid=%d, crtc=%d, seq=%d", __entry->pid, __entry->crtc, \
+		      __entry->seq)
+);
+
+TRACE_EVENT(drm_vblank_event_delivered,
+	    TP_PROTO(pid_t pid, int crtc, unsigned int seq),
+	    TP_ARGS(pid, crtc, seq),
+	    TP_STRUCT__entry(
+		    __field(pid_t, pid)
+		    __field(int, crtc)
+		    __field(unsigned int, seq)
+		    ),
+	    TP_fast_assign(
+		    __entry->pid = pid;
+		    __entry->crtc = crtc;
+		    __entry->seq = seq;
+		    ),
+	    TP_printk("pid=%d, crtc=%d, seq=%d", __entry->pid, __entry->crtc, \
+		      __entry->seq)
+);
+
+#endif /* _DRM_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
diff --git a/drivers/gpu/drm/drm_trace_points.c b/drivers/gpu/drm/drm_trace_points.c
new file mode 100644
index 00000000000..0d0eb90864a
--- /dev/null
+++ b/drivers/gpu/drm/drm_trace_points.c
@@ -0,0 +1,4 @@
+#include "drmP.h"
+
+#define CREATE_TRACE_POINTS
+#include "drm_trace.h"
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index c3b13fb41d0..3778360ecee 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -61,7 +61,7 @@ static pgprot_t drm_io_prot(uint32_t map_type, struct vm_area_struct *vma)
 		tmp = pgprot_writecombine(tmp);
 	else
 		tmp = pgprot_noncached(tmp);
-#elif defined(__sparc__)
+#elif defined(__sparc__) || defined(__arm__)
 	tmp = pgprot_noncached(tmp);
 #endif
 	return tmp;
@@ -601,6 +601,7 @@ int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
 	}
 
 	switch (map->type) {
+#if !defined(__arm__)
 	case _DRM_AGP:
 		if (drm_core_has_AGP(dev) && dev->agp->cant_use_aperture) {
 			/*
@@ -615,20 +616,31 @@ int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma)
 			break;
 		}
 		/* fall through to _DRM_FRAME_BUFFER... */
+#endif
 	case _DRM_FRAME_BUFFER:
 	case _DRM_REGISTERS:
 		offset = dev->driver->get_reg_ofs(dev);
 		vma->vm_flags |= VM_IO;	/* not in core dump */
 		vma->vm_page_prot = drm_io_prot(map->type, vma);
+#if !defined(__arm__)
 		if (io_remap_pfn_range(vma, vma->vm_start,
 				       (map->offset + offset) >> PAGE_SHIFT,
 				       vma->vm_end - vma->vm_start,
 				       vma->vm_page_prot))
 			return -EAGAIN;
+#else
+		if (remap_pfn_range(vma, vma->vm_start,
+					(map->offset + offset) >> PAGE_SHIFT,
+					vma->vm_end - vma->vm_start,
+					vma->vm_page_prot))
+			return -EAGAIN;
+#endif
+
 		DRM_DEBUG("   Type = %d; start = 0x%lx, end = 0x%lx,"
 			  " offset = 0x%llx\n",
 			  map->type,
 			  vma->vm_start, vma->vm_end, (unsigned long long)(map->offset + offset));
+
 		vma->vm_ops = &drm_vm_ops;
 		break;
 	case _DRM_CONSISTENT:
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 6d2abaf35ba..92862563e7e 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -2,3 +2,6 @@ ccflags-y := -Iinclude/drm
 
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
+
+sil164-y := sil164_drv.o
+obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o
diff --git a/drivers/gpu/drm/i2c/ch7006_drv.c b/drivers/gpu/drm/i2c/ch7006_drv.c
index 81681a07a80..833b35f44a7 100644
--- a/drivers/gpu/drm/i2c/ch7006_drv.c
+++ b/drivers/gpu/drm/i2c/ch7006_drv.c
@@ -33,7 +33,7 @@ static void ch7006_encoder_set_config(struct drm_encoder *encoder,
 {
 	struct ch7006_priv *priv = to_ch7006_priv(encoder);
 
-	priv->params = params;
+	priv->params = *(struct ch7006_encoder_params *)params;
 }
 
 static void ch7006_encoder_destroy(struct drm_encoder *encoder)
@@ -114,7 +114,7 @@ static void ch7006_encoder_mode_set(struct drm_encoder *encoder,
 {
 	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
 	struct ch7006_priv *priv = to_ch7006_priv(encoder);
-	struct ch7006_encoder_params *params = priv->params;
+	struct ch7006_encoder_params *params = &priv->params;
 	struct ch7006_state *state = &priv->state;
 	uint8_t *regs = state->regs;
 	struct ch7006_mode *mode = priv->mode;
@@ -428,6 +428,22 @@ static int ch7006_remove(struct i2c_client *client)
 	return 0;
 }
 
+static int ch7006_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	ch7006_dbg(client, "\n");
+
+	return 0;
+}
+
+static int ch7006_resume(struct i2c_client *client)
+{
+	ch7006_dbg(client, "\n");
+
+	ch7006_write(client, 0x3d, 0x0);
+
+	return 0;
+}
+
 static int ch7006_encoder_init(struct i2c_client *client,
 			       struct drm_device *dev,
 			       struct drm_encoder_slave *encoder)
@@ -487,6 +503,8 @@ static struct drm_i2c_encoder_driver ch7006_driver = {
 	.i2c_driver = {
 		.probe = ch7006_probe,
 		.remove = ch7006_remove,
+		.suspend = ch7006_suspend,
+		.resume = ch7006_resume,
 
 		.driver = {
 			.name = "ch7006",
diff --git a/drivers/gpu/drm/i2c/ch7006_priv.h b/drivers/gpu/drm/i2c/ch7006_priv.h
index b06d3d93d8a..1c6d2e3bd96 100644
--- a/drivers/gpu/drm/i2c/ch7006_priv.h
+++ b/drivers/gpu/drm/i2c/ch7006_priv.h
@@ -77,7 +77,7 @@ struct ch7006_state {
 };
 
 struct ch7006_priv {
-	struct ch7006_encoder_params *params;
+	struct ch7006_encoder_params params;
 	struct ch7006_mode *mode;
 
 	struct ch7006_state state;
diff --git a/drivers/gpu/drm/i2c/sil164_drv.c b/drivers/gpu/drm/i2c/sil164_drv.c
new file mode 100644
index 00000000000..0b6773290c0
--- /dev/null
+++ b/drivers/gpu/drm/i2c/sil164_drv.c
@@ -0,0 +1,462 @@
+/*
+ * Copyright (C) 2010 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "drmP.h"
+#include "drm_crtc_helper.h"
+#include "drm_encoder_slave.h"
+#include "i2c/sil164.h"
+
+struct sil164_priv {
+	struct sil164_encoder_params config;
+	struct i2c_client *duallink_slave;
+
+	uint8_t saved_state[0x10];
+	uint8_t saved_slave_state[0x10];
+};
+
+#define to_sil164_priv(x) \
+	((struct sil164_priv *)to_encoder_slave(x)->slave_priv)
+
+#define sil164_dbg(client, format, ...) do {				\
+		if (drm_debug & DRM_UT_KMS)				\
+			dev_printk(KERN_DEBUG, &client->dev,		\
+				   "%s: " format, __func__, ## __VA_ARGS__); \
+	} while (0)
+#define sil164_info(client, format, ...)		\
+	dev_info(&client->dev, format, __VA_ARGS__)
+#define sil164_err(client, format, ...)			\
+	dev_err(&client->dev, format, __VA_ARGS__)
+
+#define SIL164_I2C_ADDR_MASTER			0x38
+#define SIL164_I2C_ADDR_SLAVE			0x39
+
+/* HW register definitions */
+
+#define SIL164_VENDOR_LO			0x0
+#define SIL164_VENDOR_HI			0x1
+#define SIL164_DEVICE_LO			0x2
+#define SIL164_DEVICE_HI			0x3
+#define SIL164_REVISION				0x4
+#define SIL164_FREQ_MIN				0x6
+#define SIL164_FREQ_MAX				0x7
+#define SIL164_CONTROL0				0x8
+#  define SIL164_CONTROL0_POWER_ON		0x01
+#  define SIL164_CONTROL0_EDGE_RISING		0x02
+#  define SIL164_CONTROL0_INPUT_24BIT		0x04
+#  define SIL164_CONTROL0_DUAL_EDGE		0x08
+#  define SIL164_CONTROL0_HSYNC_ON		0x10
+#  define SIL164_CONTROL0_VSYNC_ON		0x20
+#define SIL164_DETECT				0x9
+#  define SIL164_DETECT_INTR_STAT		0x01
+#  define SIL164_DETECT_HOTPLUG_STAT		0x02
+#  define SIL164_DETECT_RECEIVER_STAT		0x04
+#  define SIL164_DETECT_INTR_MODE_RECEIVER	0x00
+#  define SIL164_DETECT_INTR_MODE_HOTPLUG	0x08
+#  define SIL164_DETECT_OUT_MODE_HIGH		0x00
+#  define SIL164_DETECT_OUT_MODE_INTR		0x10
+#  define SIL164_DETECT_OUT_MODE_RECEIVER	0x20
+#  define SIL164_DETECT_OUT_MODE_HOTPLUG	0x30
+#  define SIL164_DETECT_VSWING_STAT		0x80
+#define SIL164_CONTROL1				0xa
+#  define SIL164_CONTROL1_DESKEW_ENABLE		0x10
+#  define SIL164_CONTROL1_DESKEW_INCR_SHIFT	5
+#define SIL164_GPIO				0xb
+#define SIL164_CONTROL2				0xc
+#  define SIL164_CONTROL2_FILTER_ENABLE		0x01
+#  define SIL164_CONTROL2_FILTER_SETTING_SHIFT	1
+#  define SIL164_CONTROL2_DUALLINK_MASTER	0x40
+#  define SIL164_CONTROL2_SYNC_CONT		0x80
+#define SIL164_DUALLINK				0xd
+#  define SIL164_DUALLINK_ENABLE		0x10
+#  define SIL164_DUALLINK_SKEW_SHIFT		5
+#define SIL164_PLLZONE				0xe
+#  define SIL164_PLLZONE_STAT			0x08
+#  define SIL164_PLLZONE_FORCE_ON		0x10
+#  define SIL164_PLLZONE_FORCE_HIGH		0x20
+
+/* HW access functions */
+
+static void
+sil164_write(struct i2c_client *client, uint8_t addr, uint8_t val)
+{
+	uint8_t buf[] = {addr, val};
+	int ret;
+
+	ret = i2c_master_send(client, buf, ARRAY_SIZE(buf));
+	if (ret < 0)
+		sil164_err(client, "Error %d writing to subaddress 0x%x\n",
+			   ret, addr);
+}
+
+static uint8_t
+sil164_read(struct i2c_client *client, uint8_t addr)
+{
+	uint8_t val;
+	int ret;
+
+	ret = i2c_master_send(client, &addr, sizeof(addr));
+	if (ret < 0)
+		goto fail;
+
+	ret = i2c_master_recv(client, &val, sizeof(val));
+	if (ret < 0)
+		goto fail;
+
+	return val;
+
+fail:
+	sil164_err(client, "Error %d reading from subaddress 0x%x\n",
+		   ret, addr);
+	return 0;
+}
+
+static void
+sil164_save_state(struct i2c_client *client, uint8_t *state)
+{
+	int i;
+
+	for (i = 0x8; i <= 0xe; i++)
+		state[i] = sil164_read(client, i);
+}
+
+static void
+sil164_restore_state(struct i2c_client *client, uint8_t *state)
+{
+	int i;
+
+	for (i = 0x8; i <= 0xe; i++)
+		sil164_write(client, i, state[i]);
+}
+
+static void
+sil164_set_power_state(struct i2c_client *client, bool on)
+{
+	uint8_t control0 = sil164_read(client, SIL164_CONTROL0);
+
+	if (on)
+		control0 |= SIL164_CONTROL0_POWER_ON;
+	else
+		control0 &= ~SIL164_CONTROL0_POWER_ON;
+
+	sil164_write(client, SIL164_CONTROL0, control0);
+}
+
+static void
+sil164_init_state(struct i2c_client *client,
+		  struct sil164_encoder_params *config,
+		  bool duallink)
+{
+	sil164_write(client, SIL164_CONTROL0,
+		     SIL164_CONTROL0_HSYNC_ON |
+		     SIL164_CONTROL0_VSYNC_ON |
+		     (config->input_edge ? SIL164_CONTROL0_EDGE_RISING : 0) |
+		     (config->input_width ? SIL164_CONTROL0_INPUT_24BIT : 0) |
+		     (config->input_dual ? SIL164_CONTROL0_DUAL_EDGE : 0));
+
+	sil164_write(client, SIL164_DETECT,
+		     SIL164_DETECT_INTR_STAT |
+		     SIL164_DETECT_OUT_MODE_RECEIVER);
+
+	sil164_write(client, SIL164_CONTROL1,
+		     (config->input_skew ? SIL164_CONTROL1_DESKEW_ENABLE : 0) |
+		     (((config->input_skew + 4) & 0x7)
+		      << SIL164_CONTROL1_DESKEW_INCR_SHIFT));
+
+	sil164_write(client, SIL164_CONTROL2,
+		     SIL164_CONTROL2_SYNC_CONT |
+		     (config->pll_filter ? 0 : SIL164_CONTROL2_FILTER_ENABLE) |
+		     (4 << SIL164_CONTROL2_FILTER_SETTING_SHIFT));
+
+	sil164_write(client, SIL164_PLLZONE, 0);
+
+	if (duallink)
+		sil164_write(client, SIL164_DUALLINK,
+			     SIL164_DUALLINK_ENABLE |
+			     (((config->duallink_skew + 4) & 0x7)
+			      << SIL164_DUALLINK_SKEW_SHIFT));
+	else
+		sil164_write(client, SIL164_DUALLINK, 0);
+}
+
+/* DRM encoder functions */
+
+static void
+sil164_encoder_set_config(struct drm_encoder *encoder, void *params)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+
+	priv->config = *(struct sil164_encoder_params *)params;
+}
+
+static void
+sil164_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+	bool on = (mode == DRM_MODE_DPMS_ON);
+	bool duallink = (on && encoder->crtc->mode.clock > 165000);
+
+	sil164_set_power_state(drm_i2c_encoder_get_client(encoder), on);
+
+	if (priv->duallink_slave)
+		sil164_set_power_state(priv->duallink_slave, duallink);
+}
+
+static void
+sil164_encoder_save(struct drm_encoder *encoder)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+
+	sil164_save_state(drm_i2c_encoder_get_client(encoder),
+			  priv->saved_state);
+
+	if (priv->duallink_slave)
+		sil164_save_state(priv->duallink_slave,
+				  priv->saved_slave_state);
+}
+
+static void
+sil164_encoder_restore(struct drm_encoder *encoder)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+
+	sil164_restore_state(drm_i2c_encoder_get_client(encoder),
+			     priv->saved_state);
+
+	if (priv->duallink_slave)
+		sil164_restore_state(priv->duallink_slave,
+				     priv->saved_slave_state);
+}
+
+static bool
+sil164_encoder_mode_fixup(struct drm_encoder *encoder,
+			  struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static int
+sil164_encoder_mode_valid(struct drm_encoder *encoder,
+			  struct drm_display_mode *mode)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+
+	if (mode->clock < 32000)
+		return MODE_CLOCK_LOW;
+
+	if (mode->clock > 330000 ||
+	    (mode->clock > 165000 && !priv->duallink_slave))
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void
+sil164_encoder_mode_set(struct drm_encoder *encoder,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+	bool duallink = adjusted_mode->clock > 165000;
+
+	sil164_init_state(drm_i2c_encoder_get_client(encoder),
+			  &priv->config, duallink);
+
+	if (priv->duallink_slave)
+		sil164_init_state(priv->duallink_slave,
+				  &priv->config, duallink);
+
+	sil164_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static enum drm_connector_status
+sil164_encoder_detect(struct drm_encoder *encoder,
+		      struct drm_connector *connector)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+
+	if (sil164_read(client, SIL164_DETECT) & SIL164_DETECT_HOTPLUG_STAT)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static int
+sil164_encoder_get_modes(struct drm_encoder *encoder,
+			 struct drm_connector *connector)
+{
+	return 0;
+}
+
+static int
+sil164_encoder_create_resources(struct drm_encoder *encoder,
+				struct drm_connector *connector)
+{
+	return 0;
+}
+
+static int
+sil164_encoder_set_property(struct drm_encoder *encoder,
+			    struct drm_connector *connector,
+			    struct drm_property *property,
+			    uint64_t val)
+{
+	return 0;
+}
+
+static void
+sil164_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct sil164_priv *priv = to_sil164_priv(encoder);
+
+	if (priv->duallink_slave)
+		i2c_unregister_device(priv->duallink_slave);
+
+	kfree(priv);
+	drm_i2c_encoder_destroy(encoder);
+}
+
+static struct drm_encoder_slave_funcs sil164_encoder_funcs = {
+	.set_config = sil164_encoder_set_config,
+	.destroy = sil164_encoder_destroy,
+	.dpms = sil164_encoder_dpms,
+	.save = sil164_encoder_save,
+	.restore = sil164_encoder_restore,
+	.mode_fixup = sil164_encoder_mode_fixup,
+	.mode_valid = sil164_encoder_mode_valid,
+	.mode_set = sil164_encoder_mode_set,
+	.detect = sil164_encoder_detect,
+	.get_modes = sil164_encoder_get_modes,
+	.create_resources = sil164_encoder_create_resources,
+	.set_property = sil164_encoder_set_property,
+};
+
+/* I2C driver functions */
+
+static int
+sil164_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int vendor = sil164_read(client, SIL164_VENDOR_HI) << 8 |
+		sil164_read(client, SIL164_VENDOR_LO);
+	int device = sil164_read(client, SIL164_DEVICE_HI) << 8 |
+		sil164_read(client, SIL164_DEVICE_LO);
+	int rev = sil164_read(client, SIL164_REVISION);
+
+	if (vendor != 0x1 || device != 0x6) {
+		sil164_dbg(client, "Unknown device %x:%x.%x\n",
+			   vendor, device, rev);
+		return -ENODEV;
+	}
+
+	sil164_info(client, "Detected device %x:%x.%x\n",
+		    vendor, device, rev);
+
+	return 0;
+}
+
+static int
+sil164_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static struct i2c_client *
+sil164_detect_slave(struct i2c_client *client)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg = {
+		.addr = SIL164_I2C_ADDR_SLAVE,
+		.len = 0,
+	};
+	const struct i2c_board_info info = {
+		I2C_BOARD_INFO("sil164", SIL164_I2C_ADDR_SLAVE)
+	};
+
+	if (i2c_transfer(adap, &msg, 1) != 1) {
+		sil164_dbg(adap, "No dual-link slave found.");
+		return NULL;
+	}
+
+	return i2c_new_device(adap, &info);
+}
+
+static int
+sil164_encoder_init(struct i2c_client *client,
+		    struct drm_device *dev,
+		    struct drm_encoder_slave *encoder)
+{
+	struct sil164_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	encoder->slave_priv = priv;
+	encoder->slave_funcs = &sil164_encoder_funcs;
+
+	priv->duallink_slave = sil164_detect_slave(client);
+
+	return 0;
+}
+
+static struct i2c_device_id sil164_ids[] = {
+	{ "sil164", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sil164_ids);
+
+static struct drm_i2c_encoder_driver sil164_driver = {
+	.i2c_driver = {
+		.probe = sil164_probe,
+		.remove = sil164_remove,
+		.driver = {
+			.name = "sil164",
+		},
+		.id_table = sil164_ids,
+	},
+	.encoder_init = sil164_encoder_init,
+};
+
+/* Module initialization */
+
+static int __init
+sil164_init(void)
+{
+	return drm_i2c_encoder_register(THIS_MODULE, &sil164_driver);
+}
+
+static void __exit
+sil164_exit(void)
+{
+	drm_i2c_encoder_unregister(&sil164_driver);
+}
+
+MODULE_AUTHOR("Francisco Jerez <currojerez@riseup.net>");
+MODULE_DESCRIPTION("Silicon Image sil164 TMDS transmitter driver");
+MODULE_LICENSE("GPL and additional rights");
+
+module_init(sil164_init);
+module_exit(sil164_exit);
diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index 997d91707ad..0e6c131313d 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -37,6 +37,7 @@
 #include <linux/interrupt.h>	/* For task queue support */
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 
 #define I810_BUF_FREE		2
@@ -60,9 +61,8 @@ static struct drm_buf *i810_freelist_get(struct drm_device * dev)
 		/* In use is already a pointer */
 		used = cmpxchg(buf_priv->in_use, I810_BUF_FREE,
 			       I810_BUF_CLIENT);
-		if (used == I810_BUF_FREE) {
+		if (used == I810_BUF_FREE)
 			return buf;
-		}
 	}
 	return NULL;
 }
@@ -71,7 +71,7 @@ static struct drm_buf *i810_freelist_get(struct drm_device * dev)
  * yet, the hardware updates in use for us once its on the ring buffer.
  */
 
-static int i810_freelist_put(struct drm_device * dev, struct drm_buf * buf)
+static int i810_freelist_put(struct drm_device *dev, struct drm_buf *buf)
 {
 	drm_i810_buf_priv_t *buf_priv = buf->dev_private;
 	int used;
@@ -121,7 +121,7 @@ static const struct file_operations i810_buffer_fops = {
 	.fasync = drm_fasync,
 };
 
-static int i810_map_buffer(struct drm_buf * buf, struct drm_file *file_priv)
+static int i810_map_buffer(struct drm_buf *buf, struct drm_file *file_priv)
 {
 	struct drm_device *dev = file_priv->minor->dev;
 	drm_i810_buf_priv_t *buf_priv = buf->dev_private;
@@ -152,7 +152,7 @@ static int i810_map_buffer(struct drm_buf * buf, struct drm_file *file_priv)
 	return retcode;
 }
 
-static int i810_unmap_buffer(struct drm_buf * buf)
+static int i810_unmap_buffer(struct drm_buf *buf)
 {
 	drm_i810_buf_priv_t *buf_priv = buf->dev_private;
 	int retcode = 0;
@@ -172,7 +172,7 @@ static int i810_unmap_buffer(struct drm_buf * buf)
 	return retcode;
 }
 
-static int i810_dma_get_buffer(struct drm_device * dev, drm_i810_dma_t * d,
+static int i810_dma_get_buffer(struct drm_device *dev, drm_i810_dma_t *d,
 			       struct drm_file *file_priv)
 {
 	struct drm_buf *buf;
@@ -202,7 +202,7 @@ static int i810_dma_get_buffer(struct drm_device * dev, drm_i810_dma_t * d,
 	return retcode;
 }
 
-static int i810_dma_cleanup(struct drm_device * dev)
+static int i810_dma_cleanup(struct drm_device *dev)
 {
 	struct drm_device_dma *dma = dev->dma;
 
@@ -218,9 +218,8 @@ static int i810_dma_cleanup(struct drm_device * dev)
 		drm_i810_private_t *dev_priv =
 		    (drm_i810_private_t *) dev->dev_private;
 
-		if (dev_priv->ring.virtual_start) {
+		if (dev_priv->ring.virtual_start)
 			drm_core_ioremapfree(&dev_priv->ring.map, dev);
-		}
 		if (dev_priv->hw_status_page) {
 			pci_free_consistent(dev->pdev, PAGE_SIZE,
 					    dev_priv->hw_status_page,
@@ -242,7 +241,7 @@ static int i810_dma_cleanup(struct drm_device * dev)
 	return 0;
 }
 
-static int i810_wait_ring(struct drm_device * dev, int n)
+static int i810_wait_ring(struct drm_device *dev, int n)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	drm_i810_ring_buffer_t *ring = &(dev_priv->ring);
@@ -271,11 +270,11 @@ static int i810_wait_ring(struct drm_device * dev, int n)
 		udelay(1);
 	}
 
-      out_wait_ring:
+out_wait_ring:
 	return iters;
 }
 
-static void i810_kernel_lost_context(struct drm_device * dev)
+static void i810_kernel_lost_context(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	drm_i810_ring_buffer_t *ring = &(dev_priv->ring);
@@ -287,7 +286,7 @@ static void i810_kernel_lost_context(struct drm_device * dev)
 		ring->space += ring->Size;
 }
 
-static int i810_freelist_init(struct drm_device * dev, drm_i810_private_t * dev_priv)
+static int i810_freelist_init(struct drm_device *dev, drm_i810_private_t *dev_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
 	int my_idx = 24;
@@ -322,9 +321,9 @@ static int i810_freelist_init(struct drm_device * dev, drm_i810_private_t * dev_
 	return 0;
 }
 
-static int i810_dma_initialize(struct drm_device * dev,
-			       drm_i810_private_t * dev_priv,
-			       drm_i810_init_t * init)
+static int i810_dma_initialize(struct drm_device *dev,
+			       drm_i810_private_t *dev_priv,
+			       drm_i810_init_t *init)
 {
 	struct drm_map_list *r_list;
 	memset(dev_priv, 0, sizeof(drm_i810_private_t));
@@ -462,7 +461,7 @@ static int i810_dma_init(struct drm_device *dev, void *data,
  * Use 'volatile' & local var tmp to force the emitted values to be
  * identical to the verified ones.
  */
-static void i810EmitContextVerified(struct drm_device * dev,
+static void i810EmitContextVerified(struct drm_device *dev,
 				    volatile unsigned int *code)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
@@ -495,7 +494,7 @@ static void i810EmitContextVerified(struct drm_device * dev,
 	ADVANCE_LP_RING();
 }
 
-static void i810EmitTexVerified(struct drm_device * dev, volatile unsigned int *code)
+static void i810EmitTexVerified(struct drm_device *dev, volatile unsigned int *code)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	int i, j = 0;
@@ -528,7 +527,7 @@ static void i810EmitTexVerified(struct drm_device * dev, volatile unsigned int *
 
 /* Need to do some additional checking when setting the dest buffer.
  */
-static void i810EmitDestVerified(struct drm_device * dev,
+static void i810EmitDestVerified(struct drm_device *dev,
 				 volatile unsigned int *code)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
@@ -563,7 +562,7 @@ static void i810EmitDestVerified(struct drm_device * dev,
 	ADVANCE_LP_RING();
 }
 
-static void i810EmitState(struct drm_device * dev)
+static void i810EmitState(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	drm_i810_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -594,7 +593,7 @@ static void i810EmitState(struct drm_device * dev)
 
 /* need to verify
  */
-static void i810_dma_dispatch_clear(struct drm_device * dev, int flags,
+static void i810_dma_dispatch_clear(struct drm_device *dev, int flags,
 				    unsigned int clear_color,
 				    unsigned int clear_zval)
 {
@@ -669,7 +668,7 @@ static void i810_dma_dispatch_clear(struct drm_device * dev, int flags,
 	}
 }
 
-static void i810_dma_dispatch_swap(struct drm_device * dev)
+static void i810_dma_dispatch_swap(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	drm_i810_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -715,8 +714,8 @@ static void i810_dma_dispatch_swap(struct drm_device * dev)
 	}
 }
 
-static void i810_dma_dispatch_vertex(struct drm_device * dev,
-				     struct drm_buf * buf, int discard, int used)
+static void i810_dma_dispatch_vertex(struct drm_device *dev,
+				     struct drm_buf *buf, int discard, int used)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	drm_i810_buf_priv_t *buf_priv = buf->dev_private;
@@ -795,7 +794,7 @@ static void i810_dma_dispatch_vertex(struct drm_device * dev,
 	}
 }
 
-static void i810_dma_dispatch_flip(struct drm_device * dev)
+static void i810_dma_dispatch_flip(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	int pitch = dev_priv->pitch;
@@ -841,7 +840,7 @@ static void i810_dma_dispatch_flip(struct drm_device * dev)
 
 }
 
-static void i810_dma_quiescent(struct drm_device * dev)
+static void i810_dma_quiescent(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -858,7 +857,7 @@ static void i810_dma_quiescent(struct drm_device * dev)
 	i810_wait_ring(dev, dev_priv->ring.Size - 8);
 }
 
-static int i810_flush_queue(struct drm_device * dev)
+static int i810_flush_queue(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 	struct drm_device_dma *dma = dev->dma;
@@ -891,7 +890,7 @@ static int i810_flush_queue(struct drm_device * dev)
 }
 
 /* Must be called with the lock held */
-static void i810_reclaim_buffers(struct drm_device * dev,
+static void i810_reclaim_buffers(struct drm_device *dev,
 				 struct drm_file *file_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
@@ -969,9 +968,8 @@ static int i810_clear_bufs(struct drm_device *dev, void *data,
 	LOCK_TEST_WITH_RETURN(dev, file_priv);
 
 	/* GH: Someone's doing nasty things... */
-	if (!dev->dev_private) {
+	if (!dev->dev_private)
 		return -EINVAL;
-	}
 
 	i810_dma_dispatch_clear(dev, clear->flags,
 				clear->clear_color, clear->clear_depth);
@@ -1039,7 +1037,7 @@ static int i810_docopy(struct drm_device *dev, void *data,
 	return 0;
 }
 
-static void i810_dma_dispatch_mc(struct drm_device * dev, struct drm_buf * buf, int used,
+static void i810_dma_dispatch_mc(struct drm_device *dev, struct drm_buf *buf, int used,
 				 unsigned int last_render)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
@@ -1053,9 +1051,8 @@ static void i810_dma_dispatch_mc(struct drm_device * dev, struct drm_buf * buf,
 	i810_kernel_lost_context(dev);
 
 	u = cmpxchg(buf_priv->in_use, I810_BUF_CLIENT, I810_BUF_HARDWARE);
-	if (u != I810_BUF_CLIENT) {
+	if (u != I810_BUF_CLIENT)
 		DRM_DEBUG("MC found buffer that isn't mine!\n");
-	}
 
 	if (used > 4 * 1024)
 		used = 0;
@@ -1160,7 +1157,7 @@ static int i810_ov0_flip(struct drm_device *dev, void *data,
 
 	LOCK_TEST_WITH_RETURN(dev, file_priv);
 
-	//Tell the overlay to update
+	/* Tell the overlay to update */
 	I810_WRITE(0x30000, dev_priv->overlay_physical | 0x80000000);
 
 	return 0;
@@ -1168,7 +1165,7 @@ static int i810_ov0_flip(struct drm_device *dev, void *data,
 
 /* Not sure why this isn't set all the time:
  */
-static void i810_do_init_pageflip(struct drm_device * dev)
+static void i810_do_init_pageflip(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 
@@ -1178,7 +1175,7 @@ static void i810_do_init_pageflip(struct drm_device * dev)
 	dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
 }
 
-static int i810_do_cleanup_pageflip(struct drm_device * dev)
+static int i810_do_cleanup_pageflip(struct drm_device *dev)
 {
 	drm_i810_private_t *dev_priv = dev->dev_private;
 
@@ -1218,49 +1215,61 @@ int i810_driver_load(struct drm_device *dev, unsigned long flags)
 	return 0;
 }
 
-void i810_driver_lastclose(struct drm_device * dev)
+void i810_driver_lastclose(struct drm_device *dev)
 {
 	i810_dma_cleanup(dev);
 }
 
-void i810_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
+void i810_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
 {
 	if (dev->dev_private) {
 		drm_i810_private_t *dev_priv = dev->dev_private;
-		if (dev_priv->page_flipping) {
+		if (dev_priv->page_flipping)
 			i810_do_cleanup_pageflip(dev);
-		}
 	}
 }
 
-void i810_driver_reclaim_buffers_locked(struct drm_device * dev,
+void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
 					struct drm_file *file_priv)
 {
 	i810_reclaim_buffers(dev, file_priv);
 }
 
-int i810_driver_dma_quiescent(struct drm_device * dev)
+int i810_driver_dma_quiescent(struct drm_device *dev)
 {
 	i810_dma_quiescent(dev);
 	return 0;
 }
 
+/*
+ * call the drm_ioctl under the big kernel lock because
+ * to lock against the i810_mmap_buffers function.
+ */
+long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+	lock_kernel();
+	ret = drm_ioctl(file, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 struct drm_ioctl_desc i810_ioctls[] = {
-	DRM_IOCTL_DEF(DRM_I810_INIT, i810_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF(DRM_I810_VERTEX, i810_dma_vertex, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_CLEAR, i810_clear_bufs, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_FLUSH, i810_flush_ioctl, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_GETAGE, i810_getage, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_GETBUF, i810_getbuf, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_SWAP, i810_swap_bufs, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_COPY, i810_copybuf, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_DOCOPY, i810_docopy, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_OV0INFO, i810_ov0_info, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_FSTATUS, i810_fstatus, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_OV0FLIP, i810_ov0_flip, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_MC, i810_dma_mc, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF(DRM_I810_RSTATUS, i810_rstatus, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I810_FLIP, i810_flip_bufs, DRM_AUTH)
+	DRM_IOCTL_DEF(DRM_I810_INIT, i810_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_VERTEX, i810_dma_vertex, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_CLEAR, i810_clear_bufs, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_FLUSH, i810_flush_ioctl, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_GETAGE, i810_getage, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_GETBUF, i810_getbuf, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_SWAP, i810_swap_bufs, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_COPY, i810_copybuf, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_DOCOPY, i810_docopy, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_OV0INFO, i810_ov0_info, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_FSTATUS, i810_fstatus, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_OV0FLIP, i810_ov0_flip, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_MC, i810_dma_mc, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_RSTATUS, i810_rstatus, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I810_FLIP, i810_flip_bufs, DRM_AUTH|DRM_UNLOCKED),
 };
 
 int i810_max_ioctl = DRM_ARRAY_SIZE(i810_ioctls);
@@ -1276,7 +1285,7 @@ int i810_max_ioctl = DRM_ARRAY_SIZE(i810_ioctls);
  * \returns
  * A value of 1 is always retured to indictate every i810 is AGP.
  */
-int i810_driver_device_is_agp(struct drm_device * dev)
+int i810_driver_device_is_agp(struct drm_device *dev)
 {
 	return 1;
 }
diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c
index c1e02752e02..b4250b2cac1 100644
--- a/drivers/gpu/drm/i810/i810_drv.c
+++ b/drivers/gpu/drm/i810/i810_drv.c
@@ -59,7 +59,7 @@ static struct drm_driver driver = {
 		 .owner = THIS_MODULE,
 		 .open = drm_open,
 		 .release = drm_release,
-		 .unlocked_ioctl = drm_ioctl,
+		 .unlocked_ioctl = i810_ioctl,
 		 .mmap = drm_mmap,
 		 .poll = drm_poll,
 		 .fasync = drm_fasync,
diff --git a/drivers/gpu/drm/i810/i810_drv.h b/drivers/gpu/drm/i810/i810_drv.h
index 21e2691f28f..c9339f48179 100644
--- a/drivers/gpu/drm/i810/i810_drv.h
+++ b/drivers/gpu/drm/i810/i810_drv.h
@@ -115,56 +115,59 @@ typedef struct drm_i810_private {
 } drm_i810_private_t;
 
 				/* i810_dma.c */
-extern int i810_driver_dma_quiescent(struct drm_device * dev);
-extern void i810_driver_reclaim_buffers_locked(struct drm_device * dev,
+extern int i810_driver_dma_quiescent(struct drm_device *dev);
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
 					       struct drm_file *file_priv);
 extern int i810_driver_load(struct drm_device *, unsigned long flags);
-extern void i810_driver_lastclose(struct drm_device * dev);
-extern void i810_driver_preclose(struct drm_device * dev,
+extern void i810_driver_lastclose(struct drm_device *dev);
+extern void i810_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
-extern void i810_driver_reclaim_buffers_locked(struct drm_device * dev,
+extern void i810_driver_reclaim_buffers_locked(struct drm_device *dev,
 					       struct drm_file *file_priv);
-extern int i810_driver_device_is_agp(struct drm_device * dev);
+extern int i810_driver_device_is_agp(struct drm_device *dev);
 
+extern long i810_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 extern struct drm_ioctl_desc i810_ioctls[];
 extern int i810_max_ioctl;
 
 #define I810_BASE(reg)		((unsigned long) \
 				dev_priv->mmio_map->handle)
 #define I810_ADDR(reg)		(I810_BASE(reg) + reg)
-#define I810_DEREF(reg)		*(__volatile__ int *)I810_ADDR(reg)
+#define I810_DEREF(reg)		(*(__volatile__ int *)I810_ADDR(reg))
 #define I810_READ(reg)		I810_DEREF(reg)
-#define I810_WRITE(reg,val)	do { I810_DEREF(reg) = val; } while (0)
-#define I810_DEREF16(reg)	*(__volatile__ u16 *)I810_ADDR(reg)
+#define I810_WRITE(reg, val)	do { I810_DEREF(reg) = val; } while (0)
+#define I810_DEREF16(reg)	(*(__volatile__ u16 *)I810_ADDR(reg))
 #define I810_READ16(reg)	I810_DEREF16(reg)
-#define I810_WRITE16(reg,val)	do { I810_DEREF16(reg) = val; } while (0)
+#define I810_WRITE16(reg, val)	do { I810_DEREF16(reg) = val; } while (0)
 
 #define I810_VERBOSE 0
 #define RING_LOCALS	unsigned int outring, ringmask; \
-                        volatile char *virt;
-
-#define BEGIN_LP_RING(n) do {						\
-	if (I810_VERBOSE)                                               \
-		DRM_DEBUG("BEGIN_LP_RING(%d)\n", n);			\
-	if (dev_priv->ring.space < n*4)					\
-		i810_wait_ring(dev, n*4);				\
-	dev_priv->ring.space -= n*4;					\
-	outring = dev_priv->ring.tail;					\
-	ringmask = dev_priv->ring.tail_mask;				\
-	virt = dev_priv->ring.virtual_start;				\
+			volatile char *virt;
+
+#define BEGIN_LP_RING(n) do {					\
+	if (I810_VERBOSE)					\
+		DRM_DEBUG("BEGIN_LP_RING(%d)\n", n);		\
+	if (dev_priv->ring.space < n*4)				\
+		i810_wait_ring(dev, n*4);			\
+	dev_priv->ring.space -= n*4;				\
+	outring = dev_priv->ring.tail;				\
+	ringmask = dev_priv->ring.tail_mask;			\
+	virt = dev_priv->ring.virtual_start;			\
 } while (0)
 
-#define ADVANCE_LP_RING() do {				        \
-	if (I810_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING\n");	\
+#define ADVANCE_LP_RING() do {					\
+	if (I810_VERBOSE)					\
+		DRM_DEBUG("ADVANCE_LP_RING\n");			\
 	dev_priv->ring.tail = outring;				\
-	I810_WRITE(LP_RING + RING_TAIL, outring);	        \
-} while(0)
-
-#define OUT_RING(n) do {				                \
-	if (I810_VERBOSE) DRM_DEBUG("   OUT_RING %x\n", (int)(n));	\
-	*(volatile unsigned int *)(virt + outring) = n;	                \
-	outring += 4;					                \
-	outring &= ringmask;			                        \
+	I810_WRITE(LP_RING + RING_TAIL, outring);		\
+} while (0)
+
+#define OUT_RING(n) do {					\
+	if (I810_VERBOSE)					\
+		DRM_DEBUG("   OUT_RING %x\n", (int)(n));	\
+	*(volatile unsigned int *)(virt + outring) = n;		\
+	outring += 4;						\
+	outring &= ringmask;					\
 } while (0)
 
 #define GFX_OP_USER_INTERRUPT		((0<<29)|(2<<23))
diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c
index 65759a9a85c..5168862c922 100644
--- a/drivers/gpu/drm/i830/i830_dma.c
+++ b/drivers/gpu/drm/i830/i830_dma.c
@@ -36,6 +36,7 @@
 #include "i830_drm.h"
 #include "i830_drv.h"
 #include <linux/interrupt.h>	/* For task queue support */
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -62,9 +63,8 @@ static struct drm_buf *i830_freelist_get(struct drm_device * dev)
 		/* In use is already a pointer */
 		used = cmpxchg(buf_priv->in_use, I830_BUF_FREE,
 			       I830_BUF_CLIENT);
-		if (used == I830_BUF_FREE) {
+		if (used == I830_BUF_FREE)
 			return buf;
-		}
 	}
 	return NULL;
 }
@@ -73,7 +73,7 @@ static struct drm_buf *i830_freelist_get(struct drm_device * dev)
  * yet, the hardware updates in use for us once its on the ring buffer.
  */
 
-static int i830_freelist_put(struct drm_device * dev, struct drm_buf * buf)
+static int i830_freelist_put(struct drm_device *dev, struct drm_buf *buf)
 {
 	drm_i830_buf_priv_t *buf_priv = buf->dev_private;
 	int used;
@@ -123,7 +123,7 @@ static const struct file_operations i830_buffer_fops = {
 	.fasync = drm_fasync,
 };
 
-static int i830_map_buffer(struct drm_buf * buf, struct drm_file *file_priv)
+static int i830_map_buffer(struct drm_buf *buf, struct drm_file *file_priv)
 {
 	struct drm_device *dev = file_priv->minor->dev;
 	drm_i830_buf_priv_t *buf_priv = buf->dev_private;
@@ -156,7 +156,7 @@ static int i830_map_buffer(struct drm_buf * buf, struct drm_file *file_priv)
 	return retcode;
 }
 
-static int i830_unmap_buffer(struct drm_buf * buf)
+static int i830_unmap_buffer(struct drm_buf *buf)
 {
 	drm_i830_buf_priv_t *buf_priv = buf->dev_private;
 	int retcode = 0;
@@ -176,7 +176,7 @@ static int i830_unmap_buffer(struct drm_buf * buf)
 	return retcode;
 }
 
-static int i830_dma_get_buffer(struct drm_device * dev, drm_i830_dma_t * d,
+static int i830_dma_get_buffer(struct drm_device *dev, drm_i830_dma_t *d,
 			       struct drm_file *file_priv)
 {
 	struct drm_buf *buf;
@@ -206,7 +206,7 @@ static int i830_dma_get_buffer(struct drm_device * dev, drm_i830_dma_t * d,
 	return retcode;
 }
 
-static int i830_dma_cleanup(struct drm_device * dev)
+static int i830_dma_cleanup(struct drm_device *dev)
 {
 	struct drm_device_dma *dma = dev->dma;
 
@@ -222,9 +222,8 @@ static int i830_dma_cleanup(struct drm_device * dev)
 		drm_i830_private_t *dev_priv =
 		    (drm_i830_private_t *) dev->dev_private;
 
-		if (dev_priv->ring.virtual_start) {
+		if (dev_priv->ring.virtual_start)
 			drm_core_ioremapfree(&dev_priv->ring.map, dev);
-		}
 		if (dev_priv->hw_status_page) {
 			pci_free_consistent(dev->pdev, PAGE_SIZE,
 					    dev_priv->hw_status_page,
@@ -246,7 +245,7 @@ static int i830_dma_cleanup(struct drm_device * dev)
 	return 0;
 }
 
-int i830_wait_ring(struct drm_device * dev, int n, const char *caller)
+int i830_wait_ring(struct drm_device *dev, int n, const char *caller)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	drm_i830_ring_buffer_t *ring = &(dev_priv->ring);
@@ -276,11 +275,11 @@ int i830_wait_ring(struct drm_device * dev, int n, const char *caller)
 		dev_priv->sarea_priv->perf_boxes |= I830_BOX_WAIT;
 	}
 
-      out_wait_ring:
+out_wait_ring:
 	return iters;
 }
 
-static void i830_kernel_lost_context(struct drm_device * dev)
+static void i830_kernel_lost_context(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	drm_i830_ring_buffer_t *ring = &(dev_priv->ring);
@@ -295,7 +294,7 @@ static void i830_kernel_lost_context(struct drm_device * dev)
 		dev_priv->sarea_priv->perf_boxes |= I830_BOX_RING_EMPTY;
 }
 
-static int i830_freelist_init(struct drm_device * dev, drm_i830_private_t * dev_priv)
+static int i830_freelist_init(struct drm_device *dev, drm_i830_private_t *dev_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
 	int my_idx = 36;
@@ -329,9 +328,9 @@ static int i830_freelist_init(struct drm_device * dev, drm_i830_private_t * dev_
 	return 0;
 }
 
-static int i830_dma_initialize(struct drm_device * dev,
-			       drm_i830_private_t * dev_priv,
-			       drm_i830_init_t * init)
+static int i830_dma_initialize(struct drm_device *dev,
+			       drm_i830_private_t *dev_priv,
+			       drm_i830_init_t *init)
 {
 	struct drm_map_list *r_list;
 
@@ -482,7 +481,7 @@ static int i830_dma_init(struct drm_device *dev, void *data,
 /* Most efficient way to verify state for the i830 is as it is
  * emitted.  Non-conformant state is silently dropped.
  */
-static void i830EmitContextVerified(struct drm_device * dev, unsigned int *code)
+static void i830EmitContextVerified(struct drm_device *dev, unsigned int *code)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	int i, j = 0;
@@ -527,7 +526,7 @@ static void i830EmitContextVerified(struct drm_device * dev, unsigned int *code)
 	ADVANCE_LP_RING();
 }
 
-static void i830EmitTexVerified(struct drm_device * dev, unsigned int *code)
+static void i830EmitTexVerified(struct drm_device *dev, unsigned int *code)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	int i, j = 0;
@@ -561,7 +560,7 @@ static void i830EmitTexVerified(struct drm_device * dev, unsigned int *code)
 		printk("rejected packet %x\n", code[0]);
 }
 
-static void i830EmitTexBlendVerified(struct drm_device * dev,
+static void i830EmitTexBlendVerified(struct drm_device *dev,
 				     unsigned int *code, unsigned int num)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
@@ -586,7 +585,7 @@ static void i830EmitTexBlendVerified(struct drm_device * dev,
 	ADVANCE_LP_RING();
 }
 
-static void i830EmitTexPalette(struct drm_device * dev,
+static void i830EmitTexPalette(struct drm_device *dev,
 			       unsigned int *palette, int number, int is_shared)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
@@ -603,9 +602,8 @@ static void i830EmitTexPalette(struct drm_device * dev,
 	} else {
 		OUT_RING(CMD_OP_MAP_PALETTE_LOAD | MAP_PALETTE_NUM(number));
 	}
-	for (i = 0; i < 256; i++) {
+	for (i = 0; i < 256; i++)
 		OUT_RING(palette[i]);
-	}
 	OUT_RING(0);
 	/* KW:  WHERE IS THE ADVANCE_LP_RING?  This is effectively a noop!
 	 */
@@ -613,7 +611,7 @@ static void i830EmitTexPalette(struct drm_device * dev,
 
 /* Need to do some additional checking when setting the dest buffer.
  */
-static void i830EmitDestVerified(struct drm_device * dev, unsigned int *code)
+static void i830EmitDestVerified(struct drm_device *dev, unsigned int *code)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	unsigned int tmp;
@@ -674,7 +672,7 @@ static void i830EmitDestVerified(struct drm_device * dev, unsigned int *code)
 	ADVANCE_LP_RING();
 }
 
-static void i830EmitStippleVerified(struct drm_device * dev, unsigned int *code)
+static void i830EmitStippleVerified(struct drm_device *dev, unsigned int *code)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -685,7 +683,7 @@ static void i830EmitStippleVerified(struct drm_device * dev, unsigned int *code)
 	ADVANCE_LP_RING();
 }
 
-static void i830EmitState(struct drm_device * dev)
+static void i830EmitState(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	drm_i830_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -788,7 +786,7 @@ static void i830EmitState(struct drm_device * dev)
  * Performance monitoring functions
  */
 
-static void i830_fill_box(struct drm_device * dev,
+static void i830_fill_box(struct drm_device *dev,
 			  int x, int y, int w, int h, int r, int g, int b)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
@@ -816,17 +814,16 @@ static void i830_fill_box(struct drm_device * dev,
 	OUT_RING((y << 16) | x);
 	OUT_RING(((y + h) << 16) | (x + w));
 
-	if (dev_priv->current_page == 1) {
+	if (dev_priv->current_page == 1)
 		OUT_RING(dev_priv->front_offset);
-	} else {
+	else
 		OUT_RING(dev_priv->back_offset);
-	}
 
 	OUT_RING(color);
 	ADVANCE_LP_RING();
 }
 
-static void i830_cp_performance_boxes(struct drm_device * dev)
+static void i830_cp_performance_boxes(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 
@@ -871,7 +868,7 @@ static void i830_cp_performance_boxes(struct drm_device * dev)
 	dev_priv->sarea_priv->perf_boxes = 0;
 }
 
-static void i830_dma_dispatch_clear(struct drm_device * dev, int flags,
+static void i830_dma_dispatch_clear(struct drm_device *dev, int flags,
 				    unsigned int clear_color,
 				    unsigned int clear_zval,
 				    unsigned int clear_depthmask)
@@ -966,7 +963,7 @@ static void i830_dma_dispatch_clear(struct drm_device * dev, int flags,
 	}
 }
 
-static void i830_dma_dispatch_swap(struct drm_device * dev)
+static void i830_dma_dispatch_swap(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	drm_i830_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -1036,7 +1033,7 @@ static void i830_dma_dispatch_swap(struct drm_device * dev)
 	}
 }
 
-static void i830_dma_dispatch_flip(struct drm_device * dev)
+static void i830_dma_dispatch_flip(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -1079,8 +1076,8 @@ static void i830_dma_dispatch_flip(struct drm_device * dev)
 	dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
 }
 
-static void i830_dma_dispatch_vertex(struct drm_device * dev,
-				     struct drm_buf * buf, int discard, int used)
+static void i830_dma_dispatch_vertex(struct drm_device *dev,
+				     struct drm_buf *buf, int discard, int used)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	drm_i830_buf_priv_t *buf_priv = buf->dev_private;
@@ -1100,9 +1097,8 @@ static void i830_dma_dispatch_vertex(struct drm_device * dev,
 	if (discard) {
 		u = cmpxchg(buf_priv->in_use, I830_BUF_CLIENT,
 			    I830_BUF_HARDWARE);
-		if (u != I830_BUF_CLIENT) {
+		if (u != I830_BUF_CLIENT)
 			DRM_DEBUG("xxxx 2\n");
-		}
 	}
 
 	if (used > 4 * 1023)
@@ -1191,7 +1187,7 @@ static void i830_dma_dispatch_vertex(struct drm_device * dev,
 	}
 }
 
-static void i830_dma_quiescent(struct drm_device * dev)
+static void i830_dma_quiescent(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -1208,7 +1204,7 @@ static void i830_dma_quiescent(struct drm_device * dev)
 	i830_wait_ring(dev, dev_priv->ring.Size - 8, __func__);
 }
 
-static int i830_flush_queue(struct drm_device * dev)
+static int i830_flush_queue(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	struct drm_device_dma *dma = dev->dma;
@@ -1241,7 +1237,7 @@ static int i830_flush_queue(struct drm_device * dev)
 }
 
 /* Must be called with the lock held */
-static void i830_reclaim_buffers(struct drm_device * dev, struct drm_file *file_priv)
+static void i830_reclaim_buffers(struct drm_device *dev, struct drm_file *file_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
 	int i;
@@ -1316,9 +1312,8 @@ static int i830_clear_bufs(struct drm_device *dev, void *data,
 	LOCK_TEST_WITH_RETURN(dev, file_priv);
 
 	/* GH: Someone's doing nasty things... */
-	if (!dev->dev_private) {
+	if (!dev->dev_private)
 		return -EINVAL;
-	}
 
 	i830_dma_dispatch_clear(dev, clear->flags,
 				clear->clear_color,
@@ -1339,7 +1334,7 @@ static int i830_swap_bufs(struct drm_device *dev, void *data,
 
 /* Not sure why this isn't set all the time:
  */
-static void i830_do_init_pageflip(struct drm_device * dev)
+static void i830_do_init_pageflip(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 
@@ -1349,7 +1344,7 @@ static void i830_do_init_pageflip(struct drm_device * dev)
 	dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
 }
 
-static int i830_do_cleanup_pageflip(struct drm_device * dev)
+static int i830_do_cleanup_pageflip(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 
@@ -1490,47 +1485,59 @@ int i830_driver_load(struct drm_device *dev, unsigned long flags)
 	return 0;
 }
 
-void i830_driver_lastclose(struct drm_device * dev)
+void i830_driver_lastclose(struct drm_device *dev)
 {
 	i830_dma_cleanup(dev);
 }
 
-void i830_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
+void i830_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
 {
 	if (dev->dev_private) {
 		drm_i830_private_t *dev_priv = dev->dev_private;
-		if (dev_priv->page_flipping) {
+		if (dev_priv->page_flipping)
 			i830_do_cleanup_pageflip(dev);
-		}
 	}
 }
 
-void i830_driver_reclaim_buffers_locked(struct drm_device * dev, struct drm_file *file_priv)
+void i830_driver_reclaim_buffers_locked(struct drm_device *dev, struct drm_file *file_priv)
 {
 	i830_reclaim_buffers(dev, file_priv);
 }
 
-int i830_driver_dma_quiescent(struct drm_device * dev)
+int i830_driver_dma_quiescent(struct drm_device *dev)
 {
 	i830_dma_quiescent(dev);
 	return 0;
 }
 
+/*
+ * call the drm_ioctl under the big kernel lock because
+ * to lock against the i830_mmap_buffers function.
+ */
+long i830_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+	lock_kernel();
+	ret = drm_ioctl(file, cmd, arg);
+	unlock_kernel();
+	return ret;
+}
+
 struct drm_ioctl_desc i830_ioctls[] = {
-	DRM_IOCTL_DEF(DRM_I830_INIT, i830_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
-	DRM_IOCTL_DEF(DRM_I830_VERTEX, i830_dma_vertex, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_CLEAR, i830_clear_bufs, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_FLUSH, i830_flush_ioctl, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_GETAGE, i830_getage, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_GETBUF, i830_getbuf, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_SWAP, i830_swap_bufs, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_COPY, i830_copybuf, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_DOCOPY, i830_docopy, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_FLIP, i830_flip_bufs, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_IRQ_EMIT, i830_irq_emit, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_IRQ_WAIT, i830_irq_wait, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_GETPARAM, i830_getparam, DRM_AUTH),
-	DRM_IOCTL_DEF(DRM_I830_SETPARAM, i830_setparam, DRM_AUTH)
+	DRM_IOCTL_DEF(DRM_I830_INIT, i830_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_VERTEX, i830_dma_vertex, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_CLEAR, i830_clear_bufs, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_FLUSH, i830_flush_ioctl, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_GETAGE, i830_getage, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_GETBUF, i830_getbuf, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_SWAP, i830_swap_bufs, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_COPY, i830_copybuf, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_DOCOPY, i830_docopy, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_FLIP, i830_flip_bufs, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_IRQ_EMIT, i830_irq_emit, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_IRQ_WAIT, i830_irq_wait, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_GETPARAM, i830_getparam, DRM_AUTH|DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_I830_SETPARAM, i830_setparam, DRM_AUTH|DRM_UNLOCKED),
 };
 
 int i830_max_ioctl = DRM_ARRAY_SIZE(i830_ioctls);
@@ -1546,7 +1553,7 @@ int i830_max_ioctl = DRM_ARRAY_SIZE(i830_ioctls);
  * \returns
  * A value of 1 is always retured to indictate every i8xx is AGP.
  */
-int i830_driver_device_is_agp(struct drm_device * dev)
+int i830_driver_device_is_agp(struct drm_device *dev)
 {
 	return 1;
 }
diff --git a/drivers/gpu/drm/i830/i830_drv.c b/drivers/gpu/drm/i830/i830_drv.c
index 44f990bed8f..a5c66aa82f0 100644
--- a/drivers/gpu/drm/i830/i830_drv.c
+++ b/drivers/gpu/drm/i830/i830_drv.c
@@ -70,7 +70,7 @@ static struct drm_driver driver = {
 		 .owner = THIS_MODULE,
 		 .open = drm_open,
 		 .release = drm_release,
-		 .unlocked_ioctl = drm_ioctl,
+		 .unlocked_ioctl = i830_ioctl,
 		 .mmap = drm_mmap,
 		 .poll = drm_poll,
 		 .fasync = drm_fasync,
diff --git a/drivers/gpu/drm/i830/i830_drv.h b/drivers/gpu/drm/i830/i830_drv.h
index da82afe4ded..0df1c720560 100644
--- a/drivers/gpu/drm/i830/i830_drv.h
+++ b/drivers/gpu/drm/i830/i830_drv.h
@@ -122,6 +122,7 @@ typedef struct drm_i830_private {
 
 } drm_i830_private_t;
 
+long i830_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 extern struct drm_ioctl_desc i830_ioctls[];
 extern int i830_max_ioctl;
 
@@ -132,33 +133,33 @@ extern int i830_irq_wait(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 
 extern irqreturn_t i830_driver_irq_handler(DRM_IRQ_ARGS);
-extern void i830_driver_irq_preinstall(struct drm_device * dev);
-extern void i830_driver_irq_postinstall(struct drm_device * dev);
-extern void i830_driver_irq_uninstall(struct drm_device * dev);
+extern void i830_driver_irq_preinstall(struct drm_device *dev);
+extern void i830_driver_irq_postinstall(struct drm_device *dev);
+extern void i830_driver_irq_uninstall(struct drm_device *dev);
 extern int i830_driver_load(struct drm_device *, unsigned long flags);
-extern void i830_driver_preclose(struct drm_device * dev,
+extern void i830_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
-extern void i830_driver_lastclose(struct drm_device * dev);
-extern void i830_driver_reclaim_buffers_locked(struct drm_device * dev,
+extern void i830_driver_lastclose(struct drm_device *dev);
+extern void i830_driver_reclaim_buffers_locked(struct drm_device *dev,
 					       struct drm_file *file_priv);
-extern int i830_driver_dma_quiescent(struct drm_device * dev);
-extern int i830_driver_device_is_agp(struct drm_device * dev);
+extern int i830_driver_dma_quiescent(struct drm_device *dev);
+extern int i830_driver_device_is_agp(struct drm_device *dev);
 
-#define I830_READ(reg)          DRM_READ32(dev_priv->mmio_map, reg)
-#define I830_WRITE(reg,val)     DRM_WRITE32(dev_priv->mmio_map, reg, val)
-#define I830_READ16(reg)        DRM_READ16(dev_priv->mmio_map, reg)
-#define I830_WRITE16(reg,val)   DRM_WRITE16(dev_priv->mmio_map, reg, val)
+#define I830_READ(reg)		DRM_READ32(dev_priv->mmio_map, reg)
+#define I830_WRITE(reg, val)	DRM_WRITE32(dev_priv->mmio_map, reg, val)
+#define I830_READ16(reg)	DRM_READ16(dev_priv->mmio_map, reg)
+#define I830_WRITE16(reg, val)	DRM_WRITE16(dev_priv->mmio_map, reg, val)
 
 #define I830_VERBOSE 0
 
 #define RING_LOCALS	unsigned int outring, ringmask, outcount; \
-                        volatile char *virt;
+			volatile char *virt;
 
 #define BEGIN_LP_RING(n) do {				\
 	if (I830_VERBOSE)				\
 		printk("BEGIN_LP_RING(%d)\n", (n));	\
 	if (dev_priv->ring.space < n*4)			\
-		i830_wait_ring(dev, n*4, __func__);		\
+		i830_wait_ring(dev, n*4, __func__);	\
 	outcount = 0;					\
 	outring = dev_priv->ring.tail;			\
 	ringmask = dev_priv->ring.tail_mask;		\
@@ -166,21 +167,23 @@ extern int i830_driver_device_is_agp(struct drm_device * dev);
 } while (0)
 
 #define OUT_RING(n) do {					\
-	if (I830_VERBOSE) printk("   OUT_RING %x\n", (int)(n));	\
+	if (I830_VERBOSE)					\
+		printk("   OUT_RING %x\n", (int)(n));		\
 	*(volatile unsigned int *)(virt + outring) = n;		\
-        outcount++;						\
+	outcount++;						\
 	outring += 4;						\
 	outring &= ringmask;					\
 } while (0)
 
-#define ADVANCE_LP_RING() do {						\
-	if (I830_VERBOSE) printk("ADVANCE_LP_RING %x\n", outring);	\
-	dev_priv->ring.tail = outring;					\
-	dev_priv->ring.space -= outcount * 4;				\
-	I830_WRITE(LP_RING + RING_TAIL, outring);			\
-} while(0)
+#define ADVANCE_LP_RING() do {					\
+	if (I830_VERBOSE)					\
+		printk("ADVANCE_LP_RING %x\n", outring);	\
+	dev_priv->ring.tail = outring;				\
+	dev_priv->ring.space -= outcount * 4;			\
+	I830_WRITE(LP_RING + RING_TAIL, outring);		\
+} while (0)
 
-extern int i830_wait_ring(struct drm_device * dev, int n, const char *caller);
+extern int i830_wait_ring(struct drm_device *dev, int n, const char *caller);
 
 #define GFX_OP_USER_INTERRUPT		((0<<29)|(2<<23))
 #define GFX_OP_BREAKPOINT_INTERRUPT	((0<<29)|(1<<23))
diff --git a/drivers/gpu/drm/i830/i830_irq.c b/drivers/gpu/drm/i830/i830_irq.c
index 91ec2bb497e..d1a6b95d631 100644
--- a/drivers/gpu/drm/i830/i830_irq.c
+++ b/drivers/gpu/drm/i830/i830_irq.c
@@ -53,7 +53,7 @@ irqreturn_t i830_driver_irq_handler(DRM_IRQ_ARGS)
 	return IRQ_HANDLED;
 }
 
-static int i830_emit_irq(struct drm_device * dev)
+static int i830_emit_irq(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -70,7 +70,7 @@ static int i830_emit_irq(struct drm_device * dev)
 	return atomic_read(&dev_priv->irq_emitted);
 }
 
-static int i830_wait_irq(struct drm_device * dev, int irq_nr)
+static int i830_wait_irq(struct drm_device *dev, int irq_nr)
 {
 	drm_i830_private_t *dev_priv = (drm_i830_private_t *) dev->dev_private;
 	DECLARE_WAITQUEUE(entry, current);
@@ -156,7 +156,7 @@ int i830_irq_wait(struct drm_device *dev, void *data,
 
 /* drm_dma.h hooks
 */
-void i830_driver_irq_preinstall(struct drm_device * dev)
+void i830_driver_irq_preinstall(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = (drm_i830_private_t *) dev->dev_private;
 
@@ -168,14 +168,14 @@ void i830_driver_irq_preinstall(struct drm_device * dev)
 	init_waitqueue_head(&dev_priv->irq_queue);
 }
 
-void i830_driver_irq_postinstall(struct drm_device * dev)
+void i830_driver_irq_postinstall(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = (drm_i830_private_t *) dev->dev_private;
 
 	I830_WRITE16(I830REG_INT_ENABLE_R, 0x2);
 }
 
-void i830_driver_irq_uninstall(struct drm_device * dev)
+void i830_driver_irq_uninstall(struct drm_device *dev)
 {
 	drm_i830_private_t *dev_priv = (drm_i830_private_t *) dev->dev_private;
 	if (!dev_priv)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 2305a1234f1..f19ffe87af3 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -34,12 +34,15 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 #include "i915_trace.h"
+#include <linux/pci.h>
 #include <linux/vgaarb.h>
 #include <linux/acpi.h>
 #include <linux/pnp.h>
 #include <linux/vga_switcheroo.h>
 #include <linux/slab.h>
 
+extern int intel_max_stolen; /* from AGP driver */
+
 /**
  * Sets up the hardware status page for devices that need a physical address
  * in the register.
@@ -1256,7 +1259,7 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 		drm_mm_put_block(compressed_fb);
 	}
 
-	if (!IS_GM45(dev)) {
+	if (!(IS_GM45(dev) || IS_IRONLAKE_M(dev))) {
 		compressed_llb = drm_mm_search_free(&dev_priv->vram, 4096,
 						    4096, 0);
 		if (!compressed_llb) {
@@ -1282,8 +1285,9 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 
 	intel_disable_fbc(dev);
 	dev_priv->compressed_fb = compressed_fb;
-
-	if (IS_GM45(dev)) {
+	if (IS_IRONLAKE_M(dev))
+		I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start);
+	else if (IS_GM45(dev)) {
 		I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
 	} else {
 		I915_WRITE(FBC_CFB_BASE, cfb_base);
@@ -1291,7 +1295,7 @@ static void i915_setup_compression(struct drm_device *dev, int size)
 		dev_priv->compressed_llb = compressed_llb;
 	}
 
-	DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
+	DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
 		  ll_base, size >> 20);
 }
 
@@ -1354,7 +1358,7 @@ static int i915_load_modeset_init(struct drm_device *dev,
 	int fb_bar = IS_I9XX(dev) ? 2 : 0;
 	int ret = 0;
 
-	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
+	dev->mode_config.fb_base = pci_resource_start(dev->pdev, fb_bar) &
 		0xff000000;
 
 	/* Basic memrange allocator for stolen space (aka vram) */
@@ -2063,8 +2067,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	/* Add register map (needed for suspend/resume) */
 	mmio_bar = IS_I9XX(dev) ? 0 : 1;
-	base = drm_get_resource_start(dev, mmio_bar);
-	size = drm_get_resource_len(dev, mmio_bar);
+	base = pci_resource_start(dev->pdev, mmio_bar);
+	size = pci_resource_len(dev->pdev, mmio_bar);
 
 	if (i915_get_bridge_dev(dev)) {
 		ret = -EIO;
@@ -2104,6 +2108,12 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto out_iomapfree;
 
+	if (prealloc_size > intel_max_stolen) {
+		DRM_INFO("detected %dM stolen memory, trimming to %dM\n",
+			 prealloc_size >> 20, intel_max_stolen >> 20);
+		prealloc_size = intel_max_stolen;
+	}
+
 	dev_priv->wq = create_singlethread_workqueue("i915");
 	if (dev_priv->wq == NULL) {
 		DRM_ERROR("Failed to create our workqueue.\n");
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 423dc90c1e2..5044f653e8e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -93,11 +93,11 @@ static const struct intel_device_info intel_i945gm_info = {
 };
 
 static const struct intel_device_info intel_i965g_info = {
-	.is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
+	.is_broadwater = 1, .is_i965g = 1, .is_i9xx = 1, .has_hotplug = 1,
 };
 
 static const struct intel_device_info intel_i965gm_info = {
-	.is_i965g = 1, .is_mobile = 1, .is_i965gm = 1, .is_i9xx = 1,
+	.is_crestline = 1, .is_i965g = 1, .is_i965gm = 1, .is_i9xx = 1,
 	.is_mobile = 1, .has_fbc = 1, .has_rc6 = 1,
 	.has_hotplug = 1,
 };
@@ -114,7 +114,7 @@ static const struct intel_device_info intel_g45_info = {
 };
 
 static const struct intel_device_info intel_gm45_info = {
-	.is_i965g = 1, .is_mobile = 1, .is_g4x = 1, .is_i9xx = 1,
+	.is_i965g = 1, .is_g4x = 1, .is_i9xx = 1,
 	.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
 	.has_pipe_cxsr = 1,
 	.has_hotplug = 1,
@@ -134,7 +134,7 @@ static const struct intel_device_info intel_ironlake_d_info = {
 
 static const struct intel_device_info intel_ironlake_m_info = {
 	.is_ironlake = 1, .is_mobile = 1, .is_i965g = 1, .is_i9xx = 1,
-	.need_gfx_hws = 1, .has_rc6 = 1,
+	.need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1,
 	.has_hotplug = 1,
 };
 
@@ -148,33 +148,33 @@ static const struct intel_device_info intel_sandybridge_m_info = {
 	.has_hotplug = 1, .is_gen6 = 1,
 };
 
-static const struct pci_device_id pciidlist[] = {
-	INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
-	INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
-	INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
+static const struct pci_device_id pciidlist[] = {		/* aka */
+	INTEL_VGA_DEVICE(0x3577, &intel_i830_info),		/* I830_M */
+	INTEL_VGA_DEVICE(0x2562, &intel_845g_info),		/* 845_G */
+	INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),		/* I855_GM */
 	INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
-	INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
-	INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
-	INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
-	INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),
-	INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),
-	INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),
-	INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),
-	INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),
-	INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),
-	INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),
-	INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),
-	INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),
-	INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),
-	INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),
-	INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),
-	INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),
-	INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),
-	INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),
-	INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),
-	INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),
-	INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),
-	INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),
+	INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),		/* I865_G */
+	INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),		/* I915_G */
+	INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),		/* E7221_G */
+	INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info),		/* I915_GM */
+	INTEL_VGA_DEVICE(0x2772, &intel_i945g_info),		/* I945_G */
+	INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info),		/* I945_GM */
+	INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info),		/* I945_GME */
+	INTEL_VGA_DEVICE(0x2972, &intel_i965g_info),		/* I946_GZ */
+	INTEL_VGA_DEVICE(0x2982, &intel_i965g_info),		/* G35_G */
+	INTEL_VGA_DEVICE(0x2992, &intel_i965g_info),		/* I965_Q */
+	INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info),		/* I965_G */
+	INTEL_VGA_DEVICE(0x29b2, &intel_g33_info),		/* Q35_G */
+	INTEL_VGA_DEVICE(0x29c2, &intel_g33_info),		/* G33_G */
+	INTEL_VGA_DEVICE(0x29d2, &intel_g33_info),		/* Q33_G */
+	INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info),		/* I965_GM */
+	INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info),		/* I965_GME */
+	INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info),		/* GM45_G */
+	INTEL_VGA_DEVICE(0x2e02, &intel_g45_info),		/* IGD_E_G */
+	INTEL_VGA_DEVICE(0x2e12, &intel_g45_info),		/* Q45_G */
+	INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),		/* G45_G */
+	INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),		/* G41_G */
+	INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),		/* B43_G */
 	INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
 	INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
 	INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
@@ -340,7 +340,7 @@ int i965_reset(struct drm_device *dev, u8 flags)
 	/*
 	 * Clear request list
 	 */
-	i915_gem_retire_requests(dev, &dev_priv->render_ring);
+	i915_gem_retire_requests(dev);
 
 	if (need_display)
 		i915_save_display(dev);
@@ -413,7 +413,7 @@ int i965_reset(struct drm_device *dev, u8 flags)
 static int __devinit
 i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	return drm_get_dev(pdev, ent, &driver);
+	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
 static void
@@ -482,7 +482,7 @@ static int i915_pm_poweroff(struct device *dev)
 	return i915_drm_freeze(drm_dev);
 }
 
-const struct dev_pm_ops i915_pm_ops = {
+static const struct dev_pm_ops i915_pm_ops = {
      .suspend = i915_pm_suspend,
      .resume = i915_pm_resume,
      .freeze = i915_pm_freeze,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2e1744d37ad..906663b9929 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -176,7 +176,8 @@ struct drm_i915_display_funcs {
 	int (*get_display_clock_speed)(struct drm_device *dev);
 	int (*get_fifo_size)(struct drm_device *dev, int plane);
 	void (*update_wm)(struct drm_device *dev, int planea_clock,
-			  int planeb_clock, int sr_hdisplay, int pixel_size);
+			  int planeb_clock, int sr_hdisplay, int sr_htotal,
+			  int pixel_size);
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
@@ -200,6 +201,8 @@ struct intel_device_info {
 	u8 need_gfx_hws : 1;
 	u8 is_g4x : 1;
 	u8 is_pineview : 1;
+	u8 is_broadwater : 1;
+	u8 is_crestline : 1;
 	u8 is_ironlake : 1;
 	u8 is_gen6 : 1;
 	u8 has_fbc : 1;
@@ -288,6 +291,8 @@ typedef struct drm_i915_private {
 	struct timer_list hangcheck_timer;
 	int hangcheck_count;
 	uint32_t last_acthd;
+	uint32_t last_instdone;
+	uint32_t last_instdone1;
 
 	struct drm_mm vram;
 
@@ -547,6 +552,14 @@ typedef struct drm_i915_private {
 		struct list_head fence_list;
 
 		/**
+		 * List of objects currently pending being freed.
+		 *
+		 * These objects are no longer in use, but due to a signal
+		 * we were prevented from freeing them at the appointed time.
+		 */
+		struct list_head deferred_free_list;
+
+		/**
 		 * We leave the user IRQ off as much as possible,
 		 * but this means that requests will finish and never
 		 * be retired once the system goes idle. Set a timer to
@@ -677,7 +690,7 @@ struct drm_i915_gem_object {
 	 *
 	 * Size: 4 bits for 16 fences + sign (for FENCE_REG_NONE)
 	 */
-	int fence_reg : 5;
+	signed int fence_reg : 5;
 
 	/**
 	 * Used for checking the object doesn't appear more than once
@@ -713,7 +726,7 @@ struct drm_i915_gem_object {
 	 *
 	 * In the worst case this is 1 + 1 + 1 + 2*2 = 7. That would fit into 3
 	 * bits with absolutely no headroom. So use 4 bits. */
-	int pin_count : 4;
+	unsigned int pin_count : 4;
 #define DRM_I915_GEM_OBJECT_MAX_PIN_COUNT 0xf
 
 	/** AGP memory structure for our GTT binding. */
@@ -743,7 +756,7 @@ struct drm_i915_gem_object {
 	uint32_t stride;
 
 	/** Record of address bit 17 of each page at last unbind. */
-	long *bit_17;
+	unsigned long *bit_17;
 
 	/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
 	uint32_t agp_type;
@@ -955,8 +968,7 @@ uint32_t i915_get_gem_seqno(struct drm_device *dev,
 bool i915_seqno_passed(uint32_t seq1, uint32_t seq2);
 int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
 int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
-void i915_gem_retire_requests(struct drm_device *dev,
-		 struct intel_ring_buffer *ring);
+void i915_gem_retire_requests(struct drm_device *dev);
 void i915_gem_retire_work_handler(struct work_struct *work);
 void i915_gem_clflush_object(struct drm_gem_object *obj);
 int i915_gem_object_set_domain(struct drm_gem_object *obj,
@@ -986,7 +998,7 @@ void i915_gem_free_all_phys_object(struct drm_device *dev);
 int i915_gem_object_get_pages(struct drm_gem_object *obj, gfp_t gfpmask);
 void i915_gem_object_put_pages(struct drm_gem_object *obj);
 void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
-void i915_gem_object_flush_write_domain(struct drm_gem_object *obj);
+int i915_gem_object_flush_write_domain(struct drm_gem_object *obj);
 
 void i915_gem_shrinker_init(void);
 void i915_gem_shrinker_exit(void);
@@ -1046,6 +1058,7 @@ extern void intel_modeset_cleanup(struct drm_device *dev);
 extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
 extern void i8xx_disable_fbc(struct drm_device *dev);
 extern void g4x_disable_fbc(struct drm_device *dev);
+extern void ironlake_disable_fbc(struct drm_device *dev);
 extern void intel_disable_fbc(struct drm_device *dev);
 extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval);
 extern bool intel_fbc_enabled(struct drm_device *dev);
@@ -1135,6 +1148,8 @@ extern int intel_trans_dp_port_sel (struct drm_crtc *crtc);
 #define IS_I945GM(dev)		(INTEL_INFO(dev)->is_i945gm)
 #define IS_I965G(dev)		(INTEL_INFO(dev)->is_i965g)
 #define IS_I965GM(dev)		(INTEL_INFO(dev)->is_i965gm)
+#define IS_BROADWATER(dev)	(INTEL_INFO(dev)->is_broadwater)
+#define IS_CRESTLINE(dev)	(INTEL_INFO(dev)->is_crestline)
 #define IS_GM45(dev)		((dev)->pci_device == 0x2A42)
 #define IS_G4X(dev)		(INTEL_INFO(dev)->is_g4x)
 #define IS_PINEVIEW_G(dev)	((dev)->pci_device == 0xa001)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 5aa747fc25a..2a4ed7ca8b4 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -35,7 +35,7 @@
 #include <linux/swap.h>
 #include <linux/pci.h>
 
-static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
 static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
@@ -53,6 +53,7 @@ static int i915_gem_evict_from_inactive_list(struct drm_device *dev);
 static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 				struct drm_i915_gem_pwrite *args,
 				struct drm_file *file_priv);
+static void i915_gem_free_object_tail(struct drm_gem_object *obj);
 
 static LIST_HEAD(shrink_list);
 static DEFINE_SPINLOCK(shrink_list_lock);
@@ -127,8 +128,7 @@ i915_gem_create_ioctl(struct drm_device *dev, void *data,
 		return -ENOMEM;
 
 	ret = drm_gem_handle_create(file_priv, obj, &handle);
-	drm_gem_object_handle_unreference_unlocked(obj);
-
+	drm_gem_object_unreference_unlocked(obj);
 	if (ret)
 		return ret;
 
@@ -496,10 +496,10 @@ fast_user_write(struct io_mapping *mapping,
 	char *vaddr_atomic;
 	unsigned long unwritten;
 
-	vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base);
+	vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base, KM_USER0);
 	unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset,
 						      user_data, length);
-	io_mapping_unmap_atomic(vaddr_atomic);
+	io_mapping_unmap_atomic(vaddr_atomic, KM_USER0);
 	if (unwritten)
 		return -EFAULT;
 	return 0;
@@ -1709,9 +1709,9 @@ i915_get_gem_seqno(struct drm_device *dev,
 /**
  * This function clears the request list as sequence numbers are passed.
  */
-void
-i915_gem_retire_requests(struct drm_device *dev,
-		struct intel_ring_buffer *ring)
+static void
+i915_gem_retire_requests_ring(struct drm_device *dev,
+			      struct intel_ring_buffer *ring)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	uint32_t seqno;
@@ -1751,6 +1751,30 @@ i915_gem_retire_requests(struct drm_device *dev,
 }
 
 void
+i915_gem_retire_requests(struct drm_device *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+
+	if (!list_empty(&dev_priv->mm.deferred_free_list)) {
+	    struct drm_i915_gem_object *obj_priv, *tmp;
+
+	    /* We must be careful that during unbind() we do not
+	     * accidentally infinitely recurse into retire requests.
+	     * Currently:
+	     *   retire -> free -> unbind -> wait -> retire_ring
+	     */
+	    list_for_each_entry_safe(obj_priv, tmp,
+				     &dev_priv->mm.deferred_free_list,
+				     list)
+		    i915_gem_free_object_tail(&obj_priv->base);
+	}
+
+	i915_gem_retire_requests_ring(dev, &dev_priv->render_ring);
+	if (HAS_BSD(dev))
+		i915_gem_retire_requests_ring(dev, &dev_priv->bsd_ring);
+}
+
+void
 i915_gem_retire_work_handler(struct work_struct *work)
 {
 	drm_i915_private_t *dev_priv;
@@ -1761,10 +1785,7 @@ i915_gem_retire_work_handler(struct work_struct *work)
 	dev = dev_priv->dev;
 
 	mutex_lock(&dev->struct_mutex);
-	i915_gem_retire_requests(dev, &dev_priv->render_ring);
-
-	if (HAS_BSD(dev))
-		i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
+	i915_gem_retire_requests(dev);
 
 	if (!dev_priv->mm.suspended &&
 		(!list_empty(&dev_priv->render_ring.request_list) ||
@@ -1832,7 +1853,7 @@ i915_do_wait_request(struct drm_device *dev, uint32_t seqno,
 	 * a separate wait queue to handle that.
 	 */
 	if (ret == 0)
-		i915_gem_retire_requests(dev, ring);
+		i915_gem_retire_requests_ring(dev, ring);
 
 	return ret;
 }
@@ -1945,11 +1966,12 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 	 * before we unbind.
 	 */
 	ret = i915_gem_object_set_to_cpu_domain(obj, 1);
-	if (ret) {
-		if (ret != -ERESTARTSYS)
-			DRM_ERROR("set_domain failed: %d\n", ret);
+	if (ret == -ERESTARTSYS)
 		return ret;
-	}
+	/* Continue on if we fail due to EIO, the GPU is hung so we
+	 * should be safe and we need to cleanup or else we might
+	 * cause memory corruption through use-after-free.
+	 */
 
 	BUG_ON(obj_priv->active);
 
@@ -1985,7 +2007,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 
 	trace_i915_gem_object_unbind(obj);
 
-	return 0;
+	return ret;
 }
 
 static struct drm_gem_object *
@@ -2107,10 +2129,7 @@ i915_gem_evict_something(struct drm_device *dev, int min_size)
 	struct intel_ring_buffer *render_ring = &dev_priv->render_ring;
 	struct intel_ring_buffer *bsd_ring = &dev_priv->bsd_ring;
 	for (;;) {
-		i915_gem_retire_requests(dev, render_ring);
-
-		if (HAS_BSD(dev))
-			i915_gem_retire_requests(dev, bsd_ring);
+		i915_gem_retire_requests(dev);
 
 		/* If there's an inactive buffer available now, grab it
 		 * and be done.
@@ -2583,7 +2602,10 @@ i915_gem_object_put_fence_reg(struct drm_gem_object *obj)
 	if (!IS_I965G(dev)) {
 		int ret;
 
-		i915_gem_object_flush_gpu_write_domain(obj);
+		ret = i915_gem_object_flush_gpu_write_domain(obj);
+		if (ret != 0)
+			return ret;
+
 		ret = i915_gem_object_wait_rendering(obj);
 		if (ret != 0)
 			return ret;
@@ -2634,10 +2656,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment)
 	if (free_space != NULL) {
 		obj_priv->gtt_space = drm_mm_get_block(free_space, obj->size,
 						       alignment);
-		if (obj_priv->gtt_space != NULL) {
-			obj_priv->gtt_space->private = obj;
+		if (obj_priv->gtt_space != NULL)
 			obj_priv->gtt_offset = obj_priv->gtt_space->start;
-		}
 	}
 	if (obj_priv->gtt_space == NULL) {
 		/* If the gtt is empty and we're still having trouble
@@ -2733,7 +2753,7 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
 }
 
 /** Flushes any GPU write domain for the object if it's dirty. */
-static void
+static int
 i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
@@ -2741,17 +2761,18 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
 
 	if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
-		return;
+		return 0;
 
 	/* Queue the GPU write cache flushing we need. */
 	old_write_domain = obj->write_domain;
 	i915_gem_flush(dev, 0, obj->write_domain);
-	(void) i915_add_request(dev, NULL, obj->write_domain, obj_priv->ring);
-	BUG_ON(obj->write_domain);
+	if (i915_add_request(dev, NULL, obj->write_domain, obj_priv->ring) == 0)
+		return -ENOMEM;
 
 	trace_i915_gem_object_change_domain(obj,
 					    obj->read_domains,
 					    old_write_domain);
+	return 0;
 }
 
 /** Flushes the GTT write domain for the object if it's dirty. */
@@ -2795,9 +2816,11 @@ i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
 					    old_write_domain);
 }
 
-void
+int
 i915_gem_object_flush_write_domain(struct drm_gem_object *obj)
 {
+	int ret = 0;
+
 	switch (obj->write_domain) {
 	case I915_GEM_DOMAIN_GTT:
 		i915_gem_object_flush_gtt_write_domain(obj);
@@ -2806,9 +2829,11 @@ i915_gem_object_flush_write_domain(struct drm_gem_object *obj)
 		i915_gem_object_flush_cpu_write_domain(obj);
 		break;
 	default:
-		i915_gem_object_flush_gpu_write_domain(obj);
+		ret = i915_gem_object_flush_gpu_write_domain(obj);
 		break;
 	}
+
+	return ret;
 }
 
 /**
@@ -2828,7 +2853,10 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
 	if (obj_priv->gtt_space == NULL)
 		return -EINVAL;
 
-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret != 0)
+		return ret;
+
 	/* Wait on any GPU rendering and flushing to occur. */
 	ret = i915_gem_object_wait_rendering(obj);
 	if (ret != 0)
@@ -2878,7 +2906,9 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
 	if (obj_priv->gtt_space == NULL)
 		return -EINVAL;
 
-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
 
 	/* Wait on any GPU rendering and flushing to occur. */
 	if (obj_priv->active) {
@@ -2926,7 +2956,10 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
 	uint32_t old_write_domain, old_read_domains;
 	int ret;
 
-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
 	/* Wait on any GPU rendering and flushing to occur. */
 	ret = i915_gem_object_wait_rendering(obj);
 	if (ret != 0)
@@ -3216,7 +3249,10 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 	if (offset == 0 && size == obj->size)
 		return i915_gem_object_set_to_cpu_domain(obj, 0);
 
-	i915_gem_object_flush_gpu_write_domain(obj);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
+	if (ret)
+		return ret;
+
 	/* Wait on any GPU rendering and flushing to occur. */
 	ret = i915_gem_object_wait_rendering(obj);
 	if (ret != 0)
@@ -3451,7 +3487,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 		reloc_offset = obj_priv->gtt_offset + reloc->offset;
 		reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
 						      (reloc_offset &
-						       ~(PAGE_SIZE - 1)));
+						       ~(PAGE_SIZE - 1)),
+						      KM_USER0);
 		reloc_entry = (uint32_t __iomem *)(reloc_page +
 						   (reloc_offset & (PAGE_SIZE - 1)));
 		reloc_val = target_obj_priv->gtt_offset + reloc->delta;
@@ -3462,7 +3499,7 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 			  readl(reloc_entry), reloc_val);
 #endif
 		writel(reloc_val, reloc_entry);
-		io_mapping_unmap_atomic(reloc_page);
+		io_mapping_unmap_atomic(reloc_page, KM_USER0);
 
 		/* The updated presumed offset for this entry will be
 		 * copied back out to the user.
@@ -4313,7 +4350,6 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_busy *args = data;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
-	drm_i915_private_t *dev_priv = dev->dev_private;
 
 	obj = drm_gem_object_lookup(dev, file_priv, args->handle);
 	if (obj == NULL) {
@@ -4328,10 +4364,7 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	 * actually unmasked, and our working set ends up being larger than
 	 * required.
 	 */
-	i915_gem_retire_requests(dev, &dev_priv->render_ring);
-
-	if (HAS_BSD(dev))
-		i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
+	i915_gem_retire_requests(dev);
 
 	obj_priv = to_intel_bo(obj);
 	/* Don't count being on the flushing list against the object being
@@ -4441,20 +4474,19 @@ int i915_gem_init_object(struct drm_gem_object *obj)
 	return 0;
 }
 
-void i915_gem_free_object(struct drm_gem_object *obj)
+static void i915_gem_free_object_tail(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+	int ret;
 
-	trace_i915_gem_object_destroy(obj);
-
-	while (obj_priv->pin_count > 0)
-		i915_gem_object_unpin(obj);
-
-	if (obj_priv->phys_obj)
-		i915_gem_detach_phys_object(dev, obj);
-
-	i915_gem_object_unbind(obj);
+	ret = i915_gem_object_unbind(obj);
+	if (ret == -ERESTARTSYS) {
+		list_move(&obj_priv->list,
+			  &dev_priv->mm.deferred_free_list);
+		return;
+	}
 
 	if (obj_priv->mmap_offset)
 		i915_gem_free_mmap_offset(obj);
@@ -4466,6 +4498,22 @@ void i915_gem_free_object(struct drm_gem_object *obj)
 	kfree(obj_priv);
 }
 
+void i915_gem_free_object(struct drm_gem_object *obj)
+{
+	struct drm_device *dev = obj->dev;
+	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
+
+	trace_i915_gem_object_destroy(obj);
+
+	while (obj_priv->pin_count > 0)
+		i915_gem_object_unpin(obj);
+
+	if (obj_priv->phys_obj)
+		i915_gem_detach_phys_object(dev, obj);
+
+	i915_gem_free_object_tail(obj);
+}
+
 /** Unbinds all inactive objects. */
 static int
 i915_gem_evict_from_inactive_list(struct drm_device *dev)
@@ -4689,9 +4737,19 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
 	BUG_ON(HAS_BSD(dev) && !list_empty(&dev_priv->bsd_ring.request_list));
 	mutex_unlock(&dev->struct_mutex);
 
-	drm_irq_install(dev);
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_ringbuffer;
 
 	return 0;
+
+cleanup_ringbuffer:
+	mutex_lock(&dev->struct_mutex);
+	i915_gem_cleanup_ringbuffer(dev);
+	dev_priv->mm.suspended = 1;
+	mutex_unlock(&dev->struct_mutex);
+
+	return ret;
 }
 
 int
@@ -4729,6 +4787,7 @@ i915_gem_load(struct drm_device *dev)
 	INIT_LIST_HEAD(&dev_priv->mm.gpu_write_list);
 	INIT_LIST_HEAD(&dev_priv->mm.inactive_list);
 	INIT_LIST_HEAD(&dev_priv->mm.fence_list);
+	INIT_LIST_HEAD(&dev_priv->mm.deferred_free_list);
 	INIT_LIST_HEAD(&dev_priv->render_ring.active_list);
 	INIT_LIST_HEAD(&dev_priv->render_ring.request_list);
 	if (HAS_BSD(dev)) {
@@ -5027,10 +5086,7 @@ rescan:
 			continue;
 
 		spin_unlock(&shrink_list_lock);
-		i915_gem_retire_requests(dev, &dev_priv->render_ring);
-
-		if (HAS_BSD(dev))
-			i915_gem_retire_requests(dev, &dev_priv->bsd_ring);
+		i915_gem_retire_requests(dev);
 
 		list_for_each_entry_safe(obj_priv, next_obj,
 					 &dev_priv->mm.inactive_list,
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 4b7c49d4257..155719e4d16 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -333,8 +333,6 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
 			i915_gem_release_mmap(obj);
 
 		if (ret != 0) {
-			WARN(ret != -ERESTARTSYS,
-			     "failed to reset object for tiling switch");
 			args->tiling_mode = obj_priv->tiling_mode;
 			args->stride = obj_priv->stride;
 			goto err;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index dba53d4b9fb..85785a8844e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -171,10 +171,10 @@ void intel_enable_asle (struct drm_device *dev)
 		ironlake_enable_display_irq(dev_priv, DE_GSE);
 	else {
 		i915_enable_pipestat(dev_priv, 1,
-				     I915_LEGACY_BLC_EVENT_ENABLE);
+				     PIPE_LEGACY_BLC_EVENT_ENABLE);
 		if (IS_I965G(dev))
 			i915_enable_pipestat(dev_priv, 0,
-					     I915_LEGACY_BLC_EVENT_ENABLE);
+					     PIPE_LEGACY_BLC_EVENT_ENABLE);
 	}
 }
 
@@ -842,7 +842,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 	u32 iir, new_iir;
 	u32 pipea_stats, pipeb_stats;
 	u32 vblank_status;
-	u32 vblank_enable;
 	int vblank = 0;
 	unsigned long irqflags;
 	int irq_received;
@@ -856,13 +855,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 
 	iir = I915_READ(IIR);
 
-	if (IS_I965G(dev)) {
-		vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
-		vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
-	} else {
-		vblank_status = I915_VBLANK_INTERRUPT_STATUS;
-		vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
-	}
+	if (IS_I965G(dev))
+		vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS;
+	else
+		vblank_status = PIPE_VBLANK_INTERRUPT_STATUS;
 
 	for (;;) {
 		irq_received = iir != 0;
@@ -966,8 +962,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 				intel_finish_page_flip(dev, 1);
 		}
 
-		if ((pipea_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
-		    (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+		if ((pipea_stats & PIPE_LEGACY_BLC_EVENT_STATUS) ||
+		    (pipeb_stats & PIPE_LEGACY_BLC_EVENT_STATUS) ||
 		    (iir & I915_ASLE_INTERRUPT))
 			opregion_asle_intr(dev);
 
@@ -1233,16 +1229,21 @@ void i915_hangcheck_elapsed(unsigned long data)
 {
 	struct drm_device *dev = (struct drm_device *)data;
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t acthd;
+	uint32_t acthd, instdone, instdone1;
 
 	/* No reset support on this chip yet. */
 	if (IS_GEN6(dev))
 		return;
 
-	if (!IS_I965G(dev))
+	if (!IS_I965G(dev)) {
 		acthd = I915_READ(ACTHD);
-	else
+		instdone = I915_READ(INSTDONE);
+		instdone1 = 0;
+	} else {
 		acthd = I915_READ(ACTHD_I965);
+		instdone = I915_READ(INSTDONE_I965);
+		instdone1 = I915_READ(INSTDONE1);
+	}
 
 	/* If all work is done then ACTHD clearly hasn't advanced. */
 	if (list_empty(&dev_priv->render_ring.request_list) ||
@@ -1253,21 +1254,24 @@ void i915_hangcheck_elapsed(unsigned long data)
 		return;
 	}
 
-	if (dev_priv->last_acthd == acthd && dev_priv->hangcheck_count > 0) {
-		DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
-		i915_handle_error(dev, true);
-		return;
-	} 
+	if (dev_priv->last_acthd == acthd &&
+	    dev_priv->last_instdone == instdone &&
+	    dev_priv->last_instdone1 == instdone1) {
+		if (dev_priv->hangcheck_count++ > 1) {
+			DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
+			i915_handle_error(dev, true);
+			return;
+		}
+	} else {
+		dev_priv->hangcheck_count = 0;
+
+		dev_priv->last_acthd = acthd;
+		dev_priv->last_instdone = instdone;
+		dev_priv->last_instdone1 = instdone1;
+	}
 
 	/* Reset timer case chip hangs without another request being added */
 	mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
-
-	if (acthd != dev_priv->last_acthd)
-		dev_priv->hangcheck_count = 0;
-	else
-		dev_priv->hangcheck_count++;
-
-	dev_priv->last_acthd = acthd;
 }
 
 /* drm_dma.h hooks
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cf41c672def..281db6e5403 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -442,7 +442,7 @@
 #define GEN6_RENDER_IMR		0x20a8
 #define   GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT		(1 << 8)
 #define   GEN6_RENDER_PPGTT_PAGE_FAULT			(1 << 7)
-#define   GEN6_RENDER TIMEOUT_COUNTER_EXPIRED		(1 << 6)
+#define   GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED		(1 << 6)
 #define   GEN6_RENDER_L3_PARITY_ERROR			(1 << 5)
 #define   GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT	(1 << 4)
 #define   GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR	(1 << 3)
@@ -530,6 +530,21 @@
 #define DPFC_CHICKEN		0x3224
 #define   DPFC_HT_MODIFY	(1<<31)
 
+/* Framebuffer compression for Ironlake */
+#define ILK_DPFC_CB_BASE	0x43200
+#define ILK_DPFC_CONTROL	0x43208
+/* The bit 28-8 is reserved */
+#define   DPFC_RESERVED		(0x1FFFFF00)
+#define ILK_DPFC_RECOMP_CTL	0x4320c
+#define ILK_DPFC_STATUS		0x43210
+#define ILK_DPFC_FENCE_YOFF	0x43218
+#define ILK_DPFC_CHICKEN	0x43224
+#define ILK_FBC_RT_BASE		0x2128
+#define   ILK_FBC_RT_VALID	(1<<0)
+
+#define ILK_DISPLAY_CHICKEN1	0x42000
+#define   ILK_FBCQ_DIS		(1<<22)
+
 /*
  * GPIO regs
  */
@@ -595,32 +610,6 @@
 #define   DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000 /* i915 */
 #define   DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW	0x00ff8000 /* Pineview */
 
-#define I915_FIFO_UNDERRUN_STATUS		(1UL<<31)
-#define I915_CRC_ERROR_ENABLE			(1UL<<29)
-#define I915_CRC_DONE_ENABLE			(1UL<<28)
-#define I915_GMBUS_EVENT_ENABLE			(1UL<<27)
-#define I915_VSYNC_INTERRUPT_ENABLE		(1UL<<25)
-#define I915_DISPLAY_LINE_COMPARE_ENABLE	(1UL<<24)
-#define I915_DPST_EVENT_ENABLE			(1UL<<23)
-#define I915_LEGACY_BLC_EVENT_ENABLE		(1UL<<22)
-#define I915_ODD_FIELD_INTERRUPT_ENABLE		(1UL<<21)
-#define I915_EVEN_FIELD_INTERRUPT_ENABLE	(1UL<<20)
-#define I915_START_VBLANK_INTERRUPT_ENABLE	(1UL<<18)	/* 965 or later */
-#define I915_VBLANK_INTERRUPT_ENABLE		(1UL<<17)
-#define I915_OVERLAY_UPDATED_ENABLE		(1UL<<16)
-#define I915_CRC_ERROR_INTERRUPT_STATUS		(1UL<<13)
-#define I915_CRC_DONE_INTERRUPT_STATUS		(1UL<<12)
-#define I915_GMBUS_INTERRUPT_STATUS		(1UL<<11)
-#define I915_VSYNC_INTERRUPT_STATUS		(1UL<<9)
-#define I915_DISPLAY_LINE_COMPARE_STATUS	(1UL<<8)
-#define I915_DPST_EVENT_STATUS			(1UL<<7)
-#define I915_LEGACY_BLC_EVENT_STATUS		(1UL<<6)
-#define I915_ODD_FIELD_INTERRUPT_STATUS		(1UL<<5)
-#define I915_EVEN_FIELD_INTERRUPT_STATUS	(1UL<<4)
-#define I915_START_VBLANK_INTERRUPT_STATUS	(1UL<<2)	/* 965 or later */
-#define I915_VBLANK_INTERRUPT_STATUS		(1UL<<1)
-#define I915_OVERLAY_UPDATED_STATUS		(1UL<<0)
-
 #define SRX_INDEX		0x3c4
 #define SRX_DATA		0x3c5
 #define SR01			1
@@ -2166,7 +2155,8 @@
 #define I830_FIFO_LINE_SIZE	32
 
 #define G4X_FIFO_SIZE		127
-#define I945_FIFO_SIZE		127 /* 945 & 965 */
+#define I965_FIFO_SIZE		512
+#define I945_FIFO_SIZE		127
 #define I915_FIFO_SIZE		95
 #define I855GM_FIFO_SIZE	127 /* In cachelines */
 #define I830_FIFO_SIZE		95
@@ -2185,6 +2175,9 @@
 #define PINEVIEW_CURSOR_DFT_WM	0
 #define PINEVIEW_CURSOR_GUARD_WM	5
 
+#define I965_CURSOR_FIFO	64
+#define I965_CURSOR_MAX_WM	32
+#define I965_CURSOR_DFT_WM	8
 
 /* define the Watermark register on Ironlake */
 #define WM0_PIPEA_ILK		0x45100
@@ -2212,6 +2205,9 @@
 #define ILK_DISPLAY_FIFO	128
 #define ILK_DISPLAY_MAXWM	64
 #define ILK_DISPLAY_DFTWM	8
+#define ILK_CURSOR_FIFO		32
+#define ILK_CURSOR_MAXWM	16
+#define ILK_CURSOR_DFTWM	8
 
 #define ILK_DISPLAY_SR_FIFO	512
 #define ILK_DISPLAY_MAX_SRWM	0x1ff
@@ -2510,6 +2506,10 @@
 #define  ILK_VSDPFD_FULL	(1<<21)
 #define ILK_DSPCLK_GATE		0x42020
 #define  ILK_DPARB_CLK_GATE	(1<<5)
+/* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
+#define   ILK_CLK_FBC		(1<<7)
+#define   ILK_DPFC_DIS1		(1<<8)
+#define   ILK_DPFC_DIS2		(1<<9)
 
 #define DISP_ARB_CTL	0x45000
 #define  DISP_TILE_SURFACE_SWIZZLING	(1<<13)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 60a5800fba6..6e2025274db 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -602,7 +602,9 @@ void i915_save_display(struct drm_device *dev)
 
 	/* Only save FBC state on the platform that supports FBC */
 	if (I915_HAS_FBC(dev)) {
-		if (IS_GM45(dev)) {
+		if (IS_IRONLAKE_M(dev)) {
+			dev_priv->saveDPFC_CB_BASE = I915_READ(ILK_DPFC_CB_BASE);
+		} else if (IS_GM45(dev)) {
 			dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
 		} else {
 			dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
@@ -706,7 +708,10 @@ void i915_restore_display(struct drm_device *dev)
 
 	/* only restore FBC info on the platform that supports FBC*/
 	if (I915_HAS_FBC(dev)) {
-		if (IS_GM45(dev)) {
+		if (IS_IRONLAKE_M(dev)) {
+			ironlake_disable_fbc(dev);
+			I915_WRITE(ILK_DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+		} else if (IS_GM45(dev)) {
 			g4x_disable_fbc(dev);
 			I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
 		} else {
diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h
index fab21760dd5..fea97a21cc1 100644
--- a/drivers/gpu/drm/i915/i915_trace.h
+++ b/drivers/gpu/drm/i915/i915_trace.h
@@ -262,6 +262,42 @@ DEFINE_EVENT(i915_ring, i915_ring_wait_end,
 	    TP_ARGS(dev)
 );
 
+TRACE_EVENT(i915_flip_request,
+	    TP_PROTO(int plane, struct drm_gem_object *obj),
+
+	    TP_ARGS(plane, obj),
+
+	    TP_STRUCT__entry(
+		    __field(int, plane)
+		    __field(struct drm_gem_object *, obj)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->plane = plane;
+		    __entry->obj = obj;
+		    ),
+
+	    TP_printk("plane=%d, obj=%p", __entry->plane, __entry->obj)
+);
+
+TRACE_EVENT(i915_flip_complete,
+	    TP_PROTO(int plane, struct drm_gem_object *obj),
+
+	    TP_ARGS(plane, obj),
+
+	    TP_STRUCT__entry(
+		    __field(int, plane)
+		    __field(struct drm_gem_object *, obj)
+		    ),
+
+	    TP_fast_assign(
+		    __entry->plane = plane;
+		    __entry->obj = obj;
+		    ),
+
+	    TP_printk("plane=%d, obj=%p", __entry->plane, __entry->obj)
+);
+
 #endif /* _I915_TRACE_H_ */
 
 /* This part must be outside protection */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5e21b311982..1e5e0d379fa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -33,6 +33,7 @@
 #include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "i915_trace.h"
 #include "drm_dp_helper.h"
 
 #include "drm_crtc_helper.h"
@@ -42,6 +43,7 @@
 bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
 static void intel_update_watermarks(struct drm_device *dev);
 static void intel_increase_pllclock(struct drm_crtc *crtc, bool schedule);
+static void intel_crtc_update_cursor(struct drm_crtc *crtc);
 
 typedef struct {
     /* given values */
@@ -322,6 +324,9 @@ struct intel_limit {
 #define IRONLAKE_DP_P1_MIN		1
 #define IRONLAKE_DP_P1_MAX		2
 
+/* FDI */
+#define IRONLAKE_FDI_FREQ		2700000 /* in kHz for mode->clock */
+
 static bool
 intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
 		    int target, int refclk, intel_clock_t *best_clock);
@@ -975,7 +980,10 @@ void
 intel_wait_for_vblank(struct drm_device *dev)
 {
 	/* Wait for 20ms, i.e. one cycle at 50hz. */
-	msleep(20);
+	if (in_dbg_master())
+		mdelay(20); /* The kernel debugger cannot call msleep() */
+	else
+		msleep(20);
 }
 
 /* Parameters have changed, update FBC info */
@@ -1122,6 +1130,67 @@ static bool g4x_fbc_enabled(struct drm_device *dev)
 	return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
 }
 
+static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int plane = (intel_crtc->plane == 0) ? DPFC_CTL_PLANEA :
+					       DPFC_CTL_PLANEB;
+	unsigned long stall_watermark = 200;
+	u32 dpfc_ctl;
+
+	dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
+	dev_priv->cfb_fence = obj_priv->fence_reg;
+	dev_priv->cfb_plane = intel_crtc->plane;
+
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	dpfc_ctl &= DPFC_RESERVED;
+	dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
+	if (obj_priv->tiling_mode != I915_TILING_NONE) {
+		dpfc_ctl |= (DPFC_CTL_FENCE_EN | dev_priv->cfb_fence);
+		I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
+	} else {
+		I915_WRITE(ILK_DPFC_CHICKEN, ~DPFC_HT_MODIFY);
+	}
+
+	I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
+	I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+		   (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+		   (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+	I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
+	I915_WRITE(ILK_FBC_RT_BASE, obj_priv->gtt_offset | ILK_FBC_RT_VALID);
+	/* enable it... */
+	I915_WRITE(ILK_DPFC_CONTROL, I915_READ(ILK_DPFC_CONTROL) |
+		   DPFC_CTL_EN);
+
+	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+}
+
+void ironlake_disable_fbc(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 dpfc_ctl;
+
+	/* Disable compression */
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	dpfc_ctl &= ~DPFC_CTL_EN;
+	I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
+	intel_wait_for_vblank(dev);
+
+	DRM_DEBUG_KMS("disabled FBC\n");
+}
+
+static bool ironlake_fbc_enabled(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
 bool intel_fbc_enabled(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1248,6 +1317,10 @@ static void intel_update_fbc(struct drm_crtc *crtc,
 		goto out_disable;
 	}
 
+	/* If the kernel debugger is active, always disable compression */
+	if (in_dbg_master())
+		goto out_disable;
+
 	if (intel_fbc_enabled(dev)) {
 		/* We can re-enable it in this case, but need to update pitch */
 		if ((fb->pitch > dev_priv->cfb_pitch) ||
@@ -1279,7 +1352,12 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
 
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
-		alignment = 64 * 1024;
+		if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
+			alignment = 128 * 1024;
+		else if (IS_I965G(dev))
+			alignment = 4 * 1024;
+		else
+			alignment = 64 * 1024;
 		break;
 	case I915_TILING_X:
 		/* pin() will align the object as required by fence */
@@ -1314,6 +1392,98 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
 	return 0;
 }
 
+/* Assume fb object is pinned & idle & fenced and just update base pointers */
+static int
+intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			   int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj_priv;
+	struct drm_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
+	int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
+	int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
+	int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+	u32 dspcntr;
+
+	switch (plane) {
+	case 0:
+	case 1:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+	obj_priv = to_intel_bo(obj);
+
+	dspcntr = I915_READ(dspcntr_reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth\n");
+		return -EINVAL;
+	}
+	if (IS_I965G(dev)) {
+		if (obj_priv->tiling_mode != I915_TILING_NONE)
+			dspcntr |= DISPPLANE_TILED;
+		else
+			dspcntr &= ~DISPPLANE_TILED;
+	}
+
+	if (IS_IRONLAKE(dev))
+		/* must disable */
+		dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
+
+	I915_WRITE(dspcntr_reg, dspcntr);
+
+	Start = obj_priv->gtt_offset;
+	Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+	I915_WRITE(dspstride, fb->pitch);
+	if (IS_I965G(dev)) {
+		I915_WRITE(dspbase, Offset);
+		I915_READ(dspbase);
+		I915_WRITE(dspsurf, Start);
+		I915_READ(dspsurf);
+		I915_WRITE(dsptileoff, (y << 16) | x);
+	} else {
+		I915_WRITE(dspbase, Start + Offset);
+		I915_READ(dspbase);
+	}
+
+	if ((IS_I965G(dev) || plane == 0))
+		intel_update_fbc(crtc, &crtc->mode);
+
+	intel_wait_for_vblank(dev);
+	intel_increase_pllclock(crtc, true);
+
+	return 0;
+}
+
 static int
 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		    struct drm_framebuffer *old_fb)
@@ -1554,6 +1724,15 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
 	u32 temp, tries = 0;
 
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	temp = I915_READ(fdi_rx_imr_reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(fdi_rx_imr_reg, temp);
+	I915_READ(fdi_rx_imr_reg);
+	udelay(150);
+
 	/* enable CPU FDI TX and PCH FDI RX */
 	temp = I915_READ(fdi_tx_reg);
 	temp |= FDI_TX_ENABLE;
@@ -1571,16 +1750,7 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 	I915_READ(fdi_rx_reg);
 	udelay(150);
 
-	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
-	   for train result */
-	temp = I915_READ(fdi_rx_imr_reg);
-	temp &= ~FDI_RX_SYMBOL_LOCK;
-	temp &= ~FDI_RX_BIT_LOCK;
-	I915_WRITE(fdi_rx_imr_reg, temp);
-	I915_READ(fdi_rx_imr_reg);
-	udelay(150);
-
-	for (;;) {
+	for (tries = 0; tries < 5; tries++) {
 		temp = I915_READ(fdi_rx_iir_reg);
 		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
 
@@ -1590,14 +1760,9 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 				   temp | FDI_RX_BIT_LOCK);
 			break;
 		}
-
-		tries++;
-
-		if (tries > 5) {
-			DRM_DEBUG_KMS("FDI train 1 fail!\n");
-			break;
-		}
 	}
+	if (tries == 5)
+		DRM_DEBUG_KMS("FDI train 1 fail!\n");
 
 	/* Train 2 */
 	temp = I915_READ(fdi_tx_reg);
@@ -1613,7 +1778,7 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 
 	tries = 0;
 
-	for (;;) {
+	for (tries = 0; tries < 5; tries++) {
 		temp = I915_READ(fdi_rx_iir_reg);
 		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
 
@@ -1623,14 +1788,9 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 			DRM_DEBUG_KMS("FDI train 2 done.\n");
 			break;
 		}
-
-		tries++;
-
-		if (tries > 5) {
-			DRM_DEBUG_KMS("FDI train 2 fail!\n");
-			break;
-		}
 	}
+	if (tries == 5)
+		DRM_DEBUG_KMS("FDI train 2 fail!\n");
 
 	DRM_DEBUG_KMS("FDI train done\n");
 }
@@ -1655,6 +1815,15 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
 	int fdi_rx_imr_reg = (pipe == 0) ? FDI_RXA_IMR : FDI_RXB_IMR;
 	u32 temp, i;
 
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	temp = I915_READ(fdi_rx_imr_reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(fdi_rx_imr_reg, temp);
+	I915_READ(fdi_rx_imr_reg);
+	udelay(150);
+
 	/* enable CPU FDI TX and PCH FDI RX */
 	temp = I915_READ(fdi_tx_reg);
 	temp |= FDI_TX_ENABLE;
@@ -1680,15 +1849,6 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc)
 	I915_READ(fdi_rx_reg);
 	udelay(150);
 
-	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
-	   for train result */
-	temp = I915_READ(fdi_rx_imr_reg);
-	temp &= ~FDI_RX_SYMBOL_LOCK;
-	temp &= ~FDI_RX_BIT_LOCK;
-	I915_WRITE(fdi_rx_imr_reg, temp);
-	I915_READ(fdi_rx_imr_reg);
-	udelay(150);
-
 	for (i = 0; i < 4; i++ ) {
 		temp = I915_READ(fdi_tx_reg);
 		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -1843,7 +2003,8 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 		}
 
 		/* Enable panel fitting for LVDS */
-		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
+		    || HAS_eDP || intel_pch_has_edp(crtc)) {
 			temp = I915_READ(pf_ctl_reg);
 			I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
 
@@ -1938,9 +2099,12 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 				reg = I915_READ(trans_dp_ctl);
 				reg &= ~TRANS_DP_PORT_SEL_MASK;
 				reg = TRANS_DP_OUTPUT_ENABLE |
-				      TRANS_DP_ENH_FRAMING |
-				      TRANS_DP_VSYNC_ACTIVE_HIGH |
-				      TRANS_DP_HSYNC_ACTIVE_HIGH;
+				      TRANS_DP_ENH_FRAMING;
+
+				if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+				      reg |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+				if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+				      reg |= TRANS_DP_VSYNC_ACTIVE_HIGH;
 
 				switch (intel_trans_dp_port_sel(crtc)) {
 				case PCH_DP_B:
@@ -1980,6 +2144,8 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 		intel_crtc_load_lut(crtc);
 
+		intel_update_fbc(crtc, &crtc->mode);
+
 	break;
 	case DRM_MODE_DPMS_OFF:
 		DRM_DEBUG_KMS("crtc %d dpms off\n", pipe);
@@ -1994,6 +2160,10 @@ static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(dspbase_reg);
 		}
 
+		if (dev_priv->cfb_plane == plane &&
+		    dev_priv->display.disable_fbc)
+			dev_priv->display.disable_fbc(dev);
+
 		i915_disable_vga(dev);
 
 		/* disable cpu pipe, disable after all planes disabled */
@@ -2373,8 +2543,8 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	if (HAS_PCH_SPLIT(dev)) {
 		/* FDI link clock is fixed at 2.7G */
-		if (mode->clock * 3 > 27000 * 4)
-			return MODE_CLOCK_HIGH;
+		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+			return false;
 	}
 	return true;
 }
@@ -2556,6 +2726,20 @@ static struct intel_watermark_params g4x_wm_info = {
 	2,
 	G4X_FIFO_LINE_SIZE,
 };
+static struct intel_watermark_params g4x_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	G4X_FIFO_LINE_SIZE,
+};
+static struct intel_watermark_params i965_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	I915_FIFO_LINE_SIZE,
+};
 static struct intel_watermark_params i945_wm_info = {
 	I945_FIFO_SIZE,
 	I915_MAX_WM,
@@ -2593,6 +2777,14 @@ static struct intel_watermark_params ironlake_display_wm_info = {
 	ILK_FIFO_LINE_SIZE
 };
 
+static struct intel_watermark_params ironlake_cursor_wm_info = {
+	ILK_CURSOR_FIFO,
+	ILK_CURSOR_MAXWM,
+	ILK_CURSOR_DFTWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+
 static struct intel_watermark_params ironlake_display_srwm_info = {
 	ILK_DISPLAY_SR_FIFO,
 	ILK_DISPLAY_MAX_SRWM,
@@ -2642,7 +2834,7 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
 	 */
 	entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
 		1000;
-	entries_required /= wm->cacheline_size;
+	entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size);
 
 	DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required);
 
@@ -2653,8 +2845,14 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
 	/* Don't promote wm_size to unsigned... */
 	if (wm_size > (long)wm->max_wm)
 		wm_size = wm->max_wm;
-	if (wm_size <= 0)
+	if (wm_size <= 0) {
 		wm_size = wm->default_wm;
+		DRM_ERROR("Insufficient FIFO for plane, expect flickering:"
+			  " entries required = %ld, available = %lu.\n",
+			  entries_required + wm->guard_size,
+			  wm->fifo_size);
+	}
+
 	return wm_size;
 }
 
@@ -2763,11 +2961,9 @@ static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
 	uint32_t dsparb = I915_READ(DSPARB);
 	int size;
 
-	if (plane == 0)
-		size = dsparb & 0x7f;
-	else
-		size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
-			(dsparb & 0x7f);
+	size = dsparb & 0x7f;
+	if (plane)
+		size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
 
 	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
 			plane ? "B" : "A", size);
@@ -2781,11 +2977,9 @@ static int i85x_get_fifo_size(struct drm_device *dev, int plane)
 	uint32_t dsparb = I915_READ(DSPARB);
 	int size;
 
-	if (plane == 0)
-		size = dsparb & 0x1ff;
-	else
-		size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
-			(dsparb & 0x1ff);
+	size = dsparb & 0x1ff;
+	if (plane)
+		size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
 	size >>= 1; /* Convert to cachelines */
 
 	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
@@ -2826,7 +3020,8 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane)
 }
 
 static void pineview_update_wm(struct drm_device *dev,  int planea_clock,
-			  int planeb_clock, int sr_hdisplay, int pixel_size)
+			  int planeb_clock, int sr_hdisplay, int unused,
+			  int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg;
@@ -2891,7 +3086,8 @@ static void pineview_update_wm(struct drm_device *dev,  int planea_clock,
 }
 
 static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
-			  int planeb_clock, int sr_hdisplay, int pixel_size)
+			  int planeb_clock, int sr_hdisplay, int sr_htotal,
+			  int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int total_size, cacheline_size;
@@ -2915,12 +3111,12 @@ static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
 	 */
 	entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
 		1000;
-	entries_required /= G4X_FIFO_LINE_SIZE;
+	entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE);
 	planea_wm = entries_required + planea_params.guard_size;
 
 	entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
 		1000;
-	entries_required /= G4X_FIFO_LINE_SIZE;
+	entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE);
 	planeb_wm = entries_required + planeb_params.guard_size;
 
 	cursora_wm = cursorb_wm = 16;
@@ -2934,13 +3130,24 @@ static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
 		static const int sr_latency_ns = 12000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
-		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+		line_time_us = ((sr_htotal * 1000) / sr_clock);
 
 		/* Use ns/us then divide to preserve precision */
-		sr_entries = (((sr_latency_ns / line_time_us) + 1) *
-			      pixel_size * sr_hdisplay) / 1000;
-		sr_entries = roundup(sr_entries / cacheline_size, 1);
-		DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+		sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			      pixel_size * sr_hdisplay;
+		sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size);
+
+		entries_required = (((sr_latency_ns / line_time_us) +
+				     1000) / 1000) * pixel_size * 64;
+		entries_required = DIV_ROUND_UP(entries_required,
+					   g4x_cursor_wm_info.cacheline_size);
+		cursor_sr = entries_required + g4x_cursor_wm_info.guard_size;
+
+		if (cursor_sr > g4x_cursor_wm_info.max_wm)
+			cursor_sr = g4x_cursor_wm_info.max_wm;
+		DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
+			      "cursor %d\n", sr_entries, cursor_sr);
+
 		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
 	} else {
 		/* Turn off self refresh if both pipes are enabled */
@@ -2965,11 +3172,13 @@ static void g4x_update_wm(struct drm_device *dev,  int planea_clock,
 }
 
 static void i965_update_wm(struct drm_device *dev, int planea_clock,
-			   int planeb_clock, int sr_hdisplay, int pixel_size)
+			   int planeb_clock, int sr_hdisplay, int sr_htotal,
+			   int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long line_time_us;
 	int sr_clock, sr_entries, srwm = 1;
+	int cursor_sr = 16;
 
 	/* Calc sr entries for one plane configs */
 	if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
@@ -2977,17 +3186,31 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock,
 		static const int sr_latency_ns = 12000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
-		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+		line_time_us = ((sr_htotal * 1000) / sr_clock);
 
 		/* Use ns/us then divide to preserve precision */
-		sr_entries = (((sr_latency_ns / line_time_us) + 1) *
-			      pixel_size * sr_hdisplay) / 1000;
-		sr_entries = roundup(sr_entries / I915_FIFO_LINE_SIZE, 1);
+		sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			      pixel_size * sr_hdisplay;
+		sr_entries = DIV_ROUND_UP(sr_entries, I915_FIFO_LINE_SIZE);
 		DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
-		srwm = I945_FIFO_SIZE - sr_entries;
+		srwm = I965_FIFO_SIZE - sr_entries;
 		if (srwm < 0)
 			srwm = 1;
-		srwm &= 0x3f;
+		srwm &= 0x1ff;
+
+		sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			     pixel_size * 64;
+		sr_entries = DIV_ROUND_UP(sr_entries,
+					  i965_cursor_wm_info.cacheline_size);
+		cursor_sr = i965_cursor_wm_info.fifo_size -
+			    (sr_entries + i965_cursor_wm_info.guard_size);
+
+		if (cursor_sr > i965_cursor_wm_info.max_wm)
+			cursor_sr = i965_cursor_wm_info.max_wm;
+
+		DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
+			      "cursor %d\n", srwm, cursor_sr);
+
 		if (IS_I965GM(dev))
 			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
 	} else {
@@ -3004,10 +3227,13 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock,
 	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) |
 		   (8 << 0));
 	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+	/* update cursor SR watermark */
+	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
 }
 
 static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
-			   int planeb_clock, int sr_hdisplay, int pixel_size)
+			   int planeb_clock, int sr_hdisplay, int sr_htotal,
+			   int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t fwater_lo;
@@ -3052,12 +3278,12 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
 		static const int sr_latency_ns = 6000;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
-		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+		line_time_us = ((sr_htotal * 1000) / sr_clock);
 
 		/* Use ns/us then divide to preserve precision */
-		sr_entries = (((sr_latency_ns / line_time_us) + 1) *
-			      pixel_size * sr_hdisplay) / 1000;
-		sr_entries = roundup(sr_entries / cacheline_size, 1);
+		sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			      pixel_size * sr_hdisplay;
+		sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size);
 		DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries);
 		srwm = total_size - sr_entries;
 		if (srwm < 0)
@@ -3095,7 +3321,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
 }
 
 static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
-			   int unused2, int pixel_size)
+			   int unused2, int unused3, int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
@@ -3113,9 +3339,11 @@ static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
 }
 
 #define ILK_LP0_PLANE_LATENCY		700
+#define ILK_LP0_CURSOR_LATENCY		1300
 
 static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
-		       int planeb_clock, int sr_hdisplay, int pixel_size)
+		       int planeb_clock, int sr_hdisplay, int sr_htotal,
+		       int pixel_size)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
@@ -3123,20 +3351,48 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
 	unsigned long line_time_us;
 	int sr_clock, entries_required;
 	u32 reg_value;
+	int line_count;
+	int planea_htotal = 0, planeb_htotal = 0;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+
+	/* Need htotal for all active display plane */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		intel_crtc = to_intel_crtc(crtc);
+		if (crtc->enabled) {
+			if (intel_crtc->plane == 0)
+				planea_htotal = crtc->mode.htotal;
+			else
+				planeb_htotal = crtc->mode.htotal;
+		}
+	}
 
 	/* Calculate and update the watermark for plane A */
 	if (planea_clock) {
 		entries_required = ((planea_clock / 1000) * pixel_size *
 				     ILK_LP0_PLANE_LATENCY) / 1000;
 		entries_required = DIV_ROUND_UP(entries_required,
-				   ironlake_display_wm_info.cacheline_size);
+						ironlake_display_wm_info.cacheline_size);
 		planea_wm = entries_required +
 			    ironlake_display_wm_info.guard_size;
 
 		if (planea_wm > (int)ironlake_display_wm_info.max_wm)
 			planea_wm = ironlake_display_wm_info.max_wm;
 
-		cursora_wm = 16;
+		/* Use the large buffer method to calculate cursor watermark */
+		line_time_us = (planea_htotal * 1000) / planea_clock;
+
+		/* Use ns/us then divide to preserve precision */
+		line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000;
+
+		/* calculate the cursor watermark for cursor A */
+		entries_required = line_count * 64 * pixel_size;
+		entries_required = DIV_ROUND_UP(entries_required,
+						ironlake_cursor_wm_info.cacheline_size);
+		cursora_wm = entries_required + ironlake_cursor_wm_info.guard_size;
+		if (cursora_wm > ironlake_cursor_wm_info.max_wm)
+			cursora_wm = ironlake_cursor_wm_info.max_wm;
+
 		reg_value = I915_READ(WM0_PIPEA_ILK);
 		reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
 		reg_value |= (planea_wm << WM0_PIPE_PLANE_SHIFT) |
@@ -3150,14 +3406,27 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
 		entries_required = ((planeb_clock / 1000) * pixel_size *
 				     ILK_LP0_PLANE_LATENCY) / 1000;
 		entries_required = DIV_ROUND_UP(entries_required,
-				   ironlake_display_wm_info.cacheline_size);
+						ironlake_display_wm_info.cacheline_size);
 		planeb_wm = entries_required +
 			    ironlake_display_wm_info.guard_size;
 
 		if (planeb_wm > (int)ironlake_display_wm_info.max_wm)
 			planeb_wm = ironlake_display_wm_info.max_wm;
 
-		cursorb_wm = 16;
+		/* Use the large buffer method to calculate cursor watermark */
+		line_time_us = (planeb_htotal * 1000) / planeb_clock;
+
+		/* Use ns/us then divide to preserve precision */
+		line_count = (ILK_LP0_CURSOR_LATENCY / line_time_us + 1000) / 1000;
+
+		/* calculate the cursor watermark for cursor B */
+		entries_required = line_count * 64 * pixel_size;
+		entries_required = DIV_ROUND_UP(entries_required,
+						ironlake_cursor_wm_info.cacheline_size);
+		cursorb_wm = entries_required + ironlake_cursor_wm_info.guard_size;
+		if (cursorb_wm > ironlake_cursor_wm_info.max_wm)
+			cursorb_wm = ironlake_cursor_wm_info.max_wm;
+
 		reg_value = I915_READ(WM0_PIPEB_ILK);
 		reg_value &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
 		reg_value |= (planeb_wm << WM0_PIPE_PLANE_SHIFT) |
@@ -3172,12 +3441,12 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
 	 * display plane is used.
 	 */
 	if (!planea_clock || !planeb_clock) {
-		int line_count;
+
 		/* Read the self-refresh latency. The unit is 0.5us */
 		int ilk_sr_latency = I915_READ(MLTR_ILK) & ILK_SRLT_MASK;
 
 		sr_clock = planea_clock ? planea_clock : planeb_clock;
-		line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+		line_time_us = ((sr_htotal * 1000) / sr_clock);
 
 		/* Use ns/us then divide to preserve precision */
 		line_count = ((ilk_sr_latency * 500) / line_time_us + 1000)
@@ -3186,14 +3455,14 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
 		/* calculate the self-refresh watermark for display plane */
 		entries_required = line_count * sr_hdisplay * pixel_size;
 		entries_required = DIV_ROUND_UP(entries_required,
-				   ironlake_display_srwm_info.cacheline_size);
+						ironlake_display_srwm_info.cacheline_size);
 		sr_wm = entries_required +
 			ironlake_display_srwm_info.guard_size;
 
 		/* calculate the self-refresh watermark for display cursor */
 		entries_required = line_count * pixel_size * 64;
 		entries_required = DIV_ROUND_UP(entries_required,
-				   ironlake_cursor_srwm_info.cacheline_size);
+						ironlake_cursor_srwm_info.cacheline_size);
 		cursor_wm = entries_required +
 			    ironlake_cursor_srwm_info.guard_size;
 
@@ -3237,6 +3506,7 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
  *       bytes per pixel
  *   where
  *     line time = htotal / dotclock
+ *     surface width = hdisplay for normal plane and 64 for cursor
  *   and latency is assumed to be high, as above.
  *
  * The final value programmed to the register should always be rounded up,
@@ -3253,6 +3523,7 @@ static void intel_update_watermarks(struct drm_device *dev)
 	int sr_hdisplay = 0;
 	unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
 	int enabled = 0, pixel_size = 0;
+	int sr_htotal = 0;
 
 	if (!dev_priv->display.update_wm)
 		return;
@@ -3273,6 +3544,7 @@ static void intel_update_watermarks(struct drm_device *dev)
 			}
 			sr_hdisplay = crtc->mode.hdisplay;
 			sr_clock = crtc->mode.clock;
+			sr_htotal = crtc->mode.htotal;
 			if (crtc->fb)
 				pixel_size = crtc->fb->bits_per_pixel / 8;
 			else
@@ -3284,7 +3556,7 @@ static void intel_update_watermarks(struct drm_device *dev)
 		return;
 
 	dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
-				    sr_hdisplay, pixel_size);
+				    sr_hdisplay, sr_htotal, pixel_size);
 }
 
 static int intel_crtc_mode_set(struct drm_crtc *crtc,
@@ -3403,6 +3675,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		return -EINVAL;
 	}
 
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc);
+
 	if (is_lvds && dev_priv->lvds_downclock_avail) {
 		has_reduced_clock = limit->find_pll(limit, crtc,
 							    dev_priv->lvds_downclock,
@@ -3469,7 +3744,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 				temp |= PIPE_8BPC;
 			else
 				temp |= PIPE_6BPC;
-		} else if (is_edp) {
+		} else if (is_edp || (is_dp && intel_pch_has_edp(crtc))) {
 			switch (dev_priv->edp_bpp/3) {
 			case 8:
 				temp |= PIPE_8BPC;
@@ -3712,6 +3987,11 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 		udelay(150);
 	}
 
+	if (HAS_PCH_SPLIT(dev)) {
+		pipeconf &= ~PIPE_ENABLE_DITHER;
+		pipeconf &= ~PIPE_DITHER_TYPE_MASK;
+	}
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -3754,16 +4034,13 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 			if (dev_priv->lvds_dither) {
 				if (HAS_PCH_SPLIT(dev)) {
 					pipeconf |= PIPE_ENABLE_DITHER;
-					pipeconf &= ~PIPE_DITHER_TYPE_MASK;
 					pipeconf |= PIPE_DITHER_TYPE_ST01;
 				} else
 					lvds |= LVDS_ENABLE_DITHER;
 			} else {
-				if (HAS_PCH_SPLIT(dev)) {
-					pipeconf &= ~PIPE_ENABLE_DITHER;
-					pipeconf &= ~PIPE_DITHER_TYPE_MASK;
-				} else
+				if (!HAS_PCH_SPLIT(dev)) {
 					lvds &= ~LVDS_ENABLE_DITHER;
+				}
 			}
 		}
 		I915_WRITE(lvds_reg, lvds);
@@ -3939,6 +4216,85 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
 	}
 }
 
+/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
+static void intel_crtc_update_cursor(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int x = intel_crtc->cursor_x;
+	int y = intel_crtc->cursor_y;
+	uint32_t base, pos;
+	bool visible;
+
+	pos = 0;
+
+	if (crtc->fb) {
+		base = intel_crtc->cursor_addr;
+		if (x > (int) crtc->fb->width)
+			base = 0;
+
+		if (y > (int) crtc->fb->height)
+			base = 0;
+	} else
+		base = 0;
+
+	if (x < 0) {
+		if (x + intel_crtc->cursor_width < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
+		x = -x;
+	}
+	pos |= x << CURSOR_X_SHIFT;
+
+	if (y < 0) {
+		if (y + intel_crtc->cursor_height < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
+		y = -y;
+	}
+	pos |= y << CURSOR_Y_SHIFT;
+
+	visible = base != 0;
+	if (!visible && !intel_crtc->cursor_visble)
+		return;
+
+	I915_WRITE(pipe == 0 ? CURAPOS : CURBPOS, pos);
+	if (intel_crtc->cursor_visble != visible) {
+		uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR);
+		if (base) {
+			/* Hooray for CUR*CNTR differences */
+			if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+				cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+				cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+				cntl |= pipe << 28; /* Connect to correct pipe */
+			} else {
+				cntl &= ~(CURSOR_FORMAT_MASK);
+				cntl |= CURSOR_ENABLE;
+				cntl |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
+			}
+		} else {
+			if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+				cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+				cntl |= CURSOR_MODE_DISABLE;
+			} else {
+				cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+			}
+		}
+		I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl);
+
+		intel_crtc->cursor_visble = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base);
+
+	if (visible)
+		intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
+}
+
 static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 				 struct drm_file *file_priv,
 				 uint32_t handle,
@@ -3949,11 +4305,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_gem_object *bo;
 	struct drm_i915_gem_object *obj_priv;
-	int pipe = intel_crtc->pipe;
-	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
-	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
-	uint32_t temp = I915_READ(control);
-	size_t addr;
+	uint32_t addr;
 	int ret;
 
 	DRM_DEBUG_KMS("\n");
@@ -3961,12 +4313,6 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	/* if we want to turn off the cursor ignore width and height */
 	if (!handle) {
 		DRM_DEBUG_KMS("cursor off\n");
-		if (IS_MOBILE(dev) || IS_I9XX(dev)) {
-			temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
-			temp |= CURSOR_MODE_DISABLE;
-		} else {
-			temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
-		}
 		addr = 0;
 		bo = NULL;
 		mutex_lock(&dev->struct_mutex);
@@ -4008,7 +4354,8 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 		addr = obj_priv->gtt_offset;
 	} else {
-		ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
+		ret = i915_gem_attach_phys_object(dev, bo,
+						  (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
 		if (ret) {
 			DRM_ERROR("failed to attach phys object\n");
 			goto fail_locked;
@@ -4019,21 +4366,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 	if (!IS_I9XX(dev))
 		I915_WRITE(CURSIZE, (height << 12) | width);
 
-	/* Hooray for CUR*CNTR differences */
-	if (IS_MOBILE(dev) || IS_I9XX(dev)) {
-		temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
-		temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
-		temp |= (pipe << 28); /* Connect to correct pipe */
-	} else {
-		temp &= ~(CURSOR_FORMAT_MASK);
-		temp |= CURSOR_ENABLE;
-		temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
-	}
-
  finish:
-	I915_WRITE(control, temp);
-	I915_WRITE(base, addr);
-
 	if (intel_crtc->cursor_bo) {
 		if (dev_priv->info->cursor_needs_physical) {
 			if (intel_crtc->cursor_bo != bo)
@@ -4047,6 +4380,10 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
 
 	intel_crtc->cursor_addr = addr;
 	intel_crtc->cursor_bo = bo;
+	intel_crtc->cursor_width = width;
+	intel_crtc->cursor_height = height;
+
+	intel_crtc_update_cursor(crtc);
 
 	return 0;
 fail_unpin:
@@ -4060,34 +4397,12 @@ fail:
 
 static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
 {
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_framebuffer *intel_fb;
-	int pipe = intel_crtc->pipe;
-	uint32_t temp = 0;
-	uint32_t adder;
-
-	if (crtc->fb) {
-		intel_fb = to_intel_framebuffer(crtc->fb);
-		intel_mark_busy(dev, intel_fb->obj);
-	}
-
-	if (x < 0) {
-		temp |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
-		x = -x;
-	}
-	if (y < 0) {
-		temp |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
-		y = -y;
-	}
 
-	temp |= x << CURSOR_X_SHIFT;
-	temp |= y << CURSOR_Y_SHIFT;
+	intel_crtc->cursor_x = x;
+	intel_crtc->cursor_y = y;
 
-	adder = intel_crtc->cursor_addr;
-	I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
-	I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+	intel_crtc_update_cursor(crtc);
 
 	return 0;
 }
@@ -4671,6 +4986,8 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 	    atomic_dec_and_test(&obj_priv->pending_flip))
 		DRM_WAKEUP(&dev_priv->pending_flip_queue);
 	schedule_work(&work->work);
+
+	trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj);
 }
 
 void intel_finish_page_flip(struct drm_device *dev, int pipe)
@@ -4748,27 +5065,22 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 	mutex_lock(&dev->struct_mutex);
 	ret = intel_pin_and_fence_fb_obj(dev, obj);
-	if (ret != 0) {
-		mutex_unlock(&dev->struct_mutex);
-
-		spin_lock_irqsave(&dev->event_lock, flags);
-		intel_crtc->unpin_work = NULL;
-		spin_unlock_irqrestore(&dev->event_lock, flags);
-
-		kfree(work);
-
-		DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
-				 to_intel_bo(obj));
-		return ret;
-	}
+	if (ret)
+		goto cleanup_work;
 
 	/* Reference the objects for the scheduled work. */
 	drm_gem_object_reference(work->old_fb_obj);
 	drm_gem_object_reference(obj);
 
 	crtc->fb = fb;
-	i915_gem_object_flush_write_domain(obj);
-	drm_vblank_get(dev, intel_crtc->pipe);
+	ret = i915_gem_object_flush_write_domain(obj);
+	if (ret)
+		goto cleanup_objs;
+
+	ret = drm_vblank_get(dev, intel_crtc->pipe);
+	if (ret)
+		goto cleanup_objs;
+
 	obj_priv = to_intel_bo(obj);
 	atomic_inc(&obj_priv->pending_flip);
 	work->pending_flip_obj = obj;
@@ -4806,7 +5118,23 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 	mutex_unlock(&dev->struct_mutex);
 
+	trace_i915_flip_request(intel_crtc->plane, obj);
+
 	return 0;
+
+cleanup_objs:
+	drm_gem_object_unreference(work->old_fb_obj);
+	drm_gem_object_unreference(obj);
+cleanup_work:
+	mutex_unlock(&dev->struct_mutex);
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	intel_crtc->unpin_work = NULL;
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+
+	kfree(work);
+
+	return ret;
 }
 
 static const struct drm_crtc_helper_funcs intel_helper_funcs = {
@@ -4814,6 +5142,7 @@ static const struct drm_crtc_helper_funcs intel_helper_funcs = {
 	.mode_fixup = intel_crtc_mode_fixup,
 	.mode_set = intel_crtc_mode_set,
 	.mode_set_base = intel_pipe_set_base,
+	.mode_set_base_atomic = intel_pipe_set_base_atomic,
 	.prepare = intel_crtc_prepare,
 	.commit = intel_crtc_commit,
 	.load_lut = intel_crtc_load_lut,
@@ -4932,19 +5261,26 @@ static void intel_setup_outputs(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_encoder *encoder;
+	bool dpd_is_edp = false;
 
-	intel_crt_init(dev);
-
-	/* Set up integrated LVDS */
 	if (IS_MOBILE(dev) && !IS_I830(dev))
 		intel_lvds_init(dev);
 
 	if (HAS_PCH_SPLIT(dev)) {
-		int found;
+		dpd_is_edp = intel_dpd_is_edp(dev);
 
 		if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
 			intel_dp_init(dev, DP_A);
 
+		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
+			intel_dp_init(dev, PCH_DP_D);
+	}
+
+	intel_crt_init(dev);
+
+	if (HAS_PCH_SPLIT(dev)) {
+		int found;
+
 		if (I915_READ(HDMIB) & PORT_DETECTED) {
 			/* PCH SDVOB multiplex with HDMIB */
 			found = intel_sdvo_init(dev, PCH_SDVOB);
@@ -4963,7 +5299,7 @@ static void intel_setup_outputs(struct drm_device *dev)
 		if (I915_READ(PCH_DP_C) & DP_DETECTED)
 			intel_dp_init(dev, PCH_DP_C);
 
-		if (I915_READ(PCH_DP_D) & DP_DETECTED)
+		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
 			intel_dp_init(dev, PCH_DP_D);
 
 	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
@@ -5372,6 +5708,26 @@ void intel_init_clock_gating(struct drm_device *dev)
 					(I915_READ(DISP_ARB_CTL) |
 						DISP_FBC_WM_DIS));
 		}
+		/*
+		 * Based on the document from hardware guys the following bits
+		 * should be set unconditionally in order to enable FBC.
+		 * The bit 22 of 0x42000
+		 * The bit 22 of 0x42004
+		 * The bit 7,8,9 of 0x42020.
+		 */
+		if (IS_IRONLAKE_M(dev)) {
+			I915_WRITE(ILK_DISPLAY_CHICKEN1,
+				   I915_READ(ILK_DISPLAY_CHICKEN1) |
+				   ILK_FBCQ_DIS);
+			I915_WRITE(ILK_DISPLAY_CHICKEN2,
+				   I915_READ(ILK_DISPLAY_CHICKEN2) |
+				   ILK_DPARB_GATE);
+			I915_WRITE(ILK_DSPCLK_GATE,
+				   I915_READ(ILK_DSPCLK_GATE) |
+				   ILK_DPFC_DIS1 |
+				   ILK_DPFC_DIS2 |
+				   ILK_CLK_FBC);
+		}
 		return;
 	} else if (IS_G4X(dev)) {
 		uint32_t dspclk_gate;
@@ -5450,7 +5806,11 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.dpms = i9xx_crtc_dpms;
 
 	if (I915_HAS_FBC(dev)) {
-		if (IS_GM45(dev)) {
+		if (IS_IRONLAKE_M(dev)) {
+			dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+			dev_priv->display.enable_fbc = ironlake_enable_fbc;
+			dev_priv->display.disable_fbc = ironlake_disable_fbc;
+		} else if (IS_GM45(dev)) {
 			dev_priv->display.fbc_enabled = g4x_fbc_enabled;
 			dev_priv->display.enable_fbc = g4x_enable_fbc;
 			dev_priv->display.disable_fbc = g4x_disable_fbc;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5dde80f9e65..40be1fa65be 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -43,6 +43,7 @@
 #define DP_LINK_CONFIGURATION_SIZE	9
 
 #define IS_eDP(i) ((i)->type == INTEL_OUTPUT_EDP)
+#define IS_PCH_eDP(dp_priv) ((dp_priv)->is_pch_edp)
 
 struct intel_dp_priv {
 	uint32_t output_reg;
@@ -56,6 +57,7 @@ struct intel_dp_priv {
 	struct intel_encoder *intel_encoder;
 	struct i2c_adapter adapter;
 	struct i2c_algo_dp_aux_data algo;
+	bool is_pch_edp;
 };
 
 static void
@@ -128,8 +130,9 @@ intel_dp_link_required(struct drm_device *dev,
 		       struct intel_encoder *intel_encoder, int pixel_clock)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
 
-	if (IS_eDP(intel_encoder))
+	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv))
 		return (pixel_clock * dev_priv->edp_bpp) / 8;
 	else
 		return pixel_clock * 3;
@@ -147,9 +150,21 @@ intel_dp_mode_valid(struct drm_connector *connector,
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
 	int max_lanes = intel_dp_max_lane_count(intel_encoder);
 
+	if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
+	    dev_priv->panel_fixed_mode) {
+		if (mode->hdisplay > dev_priv->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+
+		if (mode->vdisplay > dev_priv->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
 	/* only refuse the mode on non eDP since we have seen some wierd eDP panels
 	   which are outside spec tolerances but somehow work by magic */
 	if (!IS_eDP(intel_encoder) &&
@@ -508,11 +523,37 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 {
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct intel_dp_priv   *dp_priv = intel_encoder->dev_priv;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	int lane_count, clock;
 	int max_lane_count = intel_dp_max_lane_count(intel_encoder);
 	int max_clock = intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0;
 	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
 
+	if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
+	    dev_priv->panel_fixed_mode) {
+		struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
+
+		adjusted_mode->hdisplay = fixed_mode->hdisplay;
+		adjusted_mode->hsync_start = fixed_mode->hsync_start;
+		adjusted_mode->hsync_end = fixed_mode->hsync_end;
+		adjusted_mode->htotal = fixed_mode->htotal;
+
+		adjusted_mode->vdisplay = fixed_mode->vdisplay;
+		adjusted_mode->vsync_start = fixed_mode->vsync_start;
+		adjusted_mode->vsync_end = fixed_mode->vsync_end;
+		adjusted_mode->vtotal = fixed_mode->vtotal;
+
+		adjusted_mode->clock = fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+
+		/*
+		 * the mode->clock is used to calculate the Data&Link M/N
+		 * of the pipe. For the eDP the fixed clock should be used.
+		 */
+		mode->clock = dev_priv->panel_fixed_mode->clock;
+	}
+
 	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
@@ -531,7 +572,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		}
 	}
 
-	if (IS_eDP(intel_encoder)) {
+	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
 		/* okay we failed just pick the highest */
 		dp_priv->lane_count = max_lane_count;
 		dp_priv->link_bw = bws[max_clock];
@@ -563,14 +604,14 @@ intel_reduce_ratio(uint32_t *num, uint32_t *den)
 }
 
 static void
-intel_dp_compute_m_n(int bytes_per_pixel,
+intel_dp_compute_m_n(int bpp,
 		     int nlanes,
 		     int pixel_clock,
 		     int link_clock,
 		     struct intel_dp_m_n *m_n)
 {
 	m_n->tu = 64;
-	m_n->gmch_m = pixel_clock * bytes_per_pixel;
+	m_n->gmch_m = (pixel_clock * bpp) >> 3;
 	m_n->gmch_n = link_clock * nlanes;
 	intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 	m_n->link_m = pixel_clock;
@@ -578,6 +619,28 @@ intel_dp_compute_m_n(int bytes_per_pixel,
 	intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
+bool intel_pch_has_edp(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+
+	list_for_each_entry(encoder, &mode_config->encoder_list, head) {
+		struct intel_encoder *intel_encoder;
+		struct intel_dp_priv *dp_priv;
+
+		if (!encoder || encoder->crtc != crtc)
+			continue;
+
+		intel_encoder = enc_to_intel_encoder(encoder);
+		dp_priv = intel_encoder->dev_priv;
+
+		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT)
+			return dp_priv->is_pch_edp;
+	}
+	return false;
+}
+
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode)
@@ -587,7 +650,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	struct drm_encoder *encoder;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int lane_count = 4;
+	int lane_count = 4, bpp = 24;
 	struct intel_dp_m_n m_n;
 
 	/*
@@ -605,6 +668,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 
 		if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
 			lane_count = dp_priv->lane_count;
+			if (IS_PCH_eDP(dp_priv))
+				bpp = dev_priv->edp_bpp;
 			break;
 		}
 	}
@@ -614,7 +679,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(3, lane_count,
+	intel_dp_compute_m_n(bpp, lane_count,
 			     mode->clock, adjusted_mode->clock, &m_n);
 
 	if (HAS_PCH_SPLIT(dev)) {
@@ -796,7 +861,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	if (mode != DRM_MODE_DPMS_ON) {
 		if (dp_reg & DP_PORT_EN) {
 			intel_dp_link_down(intel_encoder, dp_priv->DP);
-			if (IS_eDP(intel_encoder)) {
+			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
 				ironlake_edp_backlight_off(dev);
 				ironlake_edp_panel_off(dev);
 			}
@@ -804,7 +869,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	} else {
 		if (!(dp_reg & DP_PORT_EN)) {
 			intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
-			if (IS_eDP(intel_encoder)) {
+			if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
 				ironlake_edp_panel_on(dev);
 				ironlake_edp_backlight_on(dev);
 			}
@@ -1340,17 +1405,32 @@ static int intel_dp_get_modes(struct drm_connector *connector)
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct drm_device *dev = intel_encoder->enc.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
 	int ret;
 
 	/* We should parse the EDID data and find out if it has an audio sink
 	 */
 
 	ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
-	if (ret)
+	if (ret) {
+		if ((IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) &&
+		    !dev_priv->panel_fixed_mode) {
+			struct drm_display_mode *newmode;
+			list_for_each_entry(newmode, &connector->probed_modes,
+					    head) {
+				if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
+					dev_priv->panel_fixed_mode =
+						drm_mode_duplicate(dev, newmode);
+					break;
+				}
+			}
+		}
+
 		return ret;
+	}
 
 	/* if eDP has no EDID, try to use fixed panel mode from VBT */
-	if (IS_eDP(intel_encoder)) {
+	if (IS_eDP(intel_encoder) || IS_PCH_eDP(dp_priv)) {
 		if (dev_priv->panel_fixed_mode != NULL) {
 			struct drm_display_mode *mode;
 			mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
@@ -1435,6 +1515,26 @@ intel_trans_dp_port_sel (struct drm_crtc *crtc)
 	return -1;
 }
 
+/* check the VBT to see whether the eDP is on DP-D port */
+bool intel_dpd_is_edp(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct child_device_config *p_child;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return false;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		p_child = dev_priv->child_dev + i;
+
+		if (p_child->dvo_port == PORT_IDPD &&
+		    p_child->device_type == DEVICE_TYPE_eDP)
+			return true;
+	}
+	return false;
+}
+
 void
 intel_dp_init(struct drm_device *dev, int output_reg)
 {
@@ -1444,6 +1544,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	struct intel_connector *intel_connector;
 	struct intel_dp_priv *dp_priv;
 	const char *name = NULL;
+	int type;
 
 	intel_encoder = kcalloc(sizeof(struct intel_encoder) +
 			       sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
@@ -1458,18 +1559,24 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 
 	dp_priv = (struct intel_dp_priv *)(intel_encoder + 1);
 
+	if (HAS_PCH_SPLIT(dev) && (output_reg == PCH_DP_D))
+		if (intel_dpd_is_edp(dev))
+			dp_priv->is_pch_edp = true;
+
+	if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
+		type = DRM_MODE_CONNECTOR_eDP;
+		intel_encoder->type = INTEL_OUTPUT_EDP;
+	} else {
+		type = DRM_MODE_CONNECTOR_DisplayPort;
+		intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
+	}
+
 	connector = &intel_connector->base;
-	drm_connector_init(dev, connector, &intel_dp_connector_funcs,
-			   DRM_MODE_CONNECTOR_DisplayPort);
+	drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
 	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
 
 	connector->polled = DRM_CONNECTOR_POLL_HPD;
 
-	if (output_reg == DP_A)
-		intel_encoder->type = INTEL_OUTPUT_EDP;
-	else
-		intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
-
 	if (output_reg == DP_B || output_reg == PCH_DP_B)
 		intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
 	else if (output_reg == DP_C || output_reg == PCH_DP_C)
@@ -1528,7 +1635,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 	intel_encoder->ddc_bus = &dp_priv->adapter;
 	intel_encoder->hot_plug = intel_dp_hot_plug;
 
-	if (output_reg == DP_A) {
+	if (output_reg == DP_A || IS_PCH_eDP(dp_priv)) {
 		/* initialize panel mode from VBT if available for eDP */
 		if (dev_priv->lfp_lvds_vbt_mode) {
 			dev_priv->panel_fixed_mode =
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 2f7970be905..b2190148703 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -143,8 +143,6 @@ struct intel_crtc {
 	struct drm_crtc base;
 	enum pipe pipe;
 	enum plane plane;
-	struct drm_gem_object *cursor_bo;
-	uint32_t cursor_addr;
 	u8 lut_r[256], lut_g[256], lut_b[256];
 	int dpms_mode;
 	bool busy; /* is scanout buffer being updated frequently? */
@@ -153,6 +151,12 @@ struct intel_crtc {
 	struct intel_overlay *overlay;
 	struct intel_unpin_work *unpin_work;
 	int fdi_lanes;
+
+	struct drm_gem_object *cursor_bo;
+	uint32_t cursor_addr;
+	int16_t cursor_x, cursor_y;
+	int16_t cursor_width, cursor_height;
+	bool cursor_visble;
 };
 
 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
@@ -179,6 +183,8 @@ extern void intel_dp_init(struct drm_device *dev, int dp_reg);
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 		 struct drm_display_mode *adjusted_mode);
+extern bool intel_pch_has_edp(struct drm_crtc *crtc);
+extern bool intel_dpd_is_edp(struct drm_device *dev);
 extern void intel_edp_link_config (struct intel_encoder *, int *, int *);
 
 
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 3e18c9e7729..54acd8b534d 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -61,6 +61,8 @@ static struct fb_ops intelfb_ops = {
 	.fb_pan_display = drm_fb_helper_pan_display,
 	.fb_blank = drm_fb_helper_blank,
 	.fb_setcmap = drm_fb_helper_setcmap,
+	.fb_debug_enter = drm_fb_helper_debug_enter,
+	.fb_debug_leave = drm_fb_helper_debug_leave,
 };
 
 static int intelfb_create(struct intel_fbdev *ifbdev,
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 83bd764b000..197887ed182 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -54,10 +54,11 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder,
 	struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
 	u32 sdvox;
 
-	sdvox = SDVO_ENCODING_HDMI |
-		SDVO_BORDER_ENABLE |
-		SDVO_VSYNC_ACTIVE_HIGH |
-		SDVO_HSYNC_ACTIVE_HIGH;
+	sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
 
 	if (hdmi_priv->has_hdmi_sink) {
 		sdvox |= SDVO_AUDIO_ENABLE;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 0eab8df5bf7..0a2e60059fb 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -156,31 +156,73 @@ static int intel_lvds_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
+static void
+centre_horizontally(struct drm_display_mode *mode,
+		    int width)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the hsync and hblank widths constant */
+	sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start;
+	blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->hdisplay - width + 1) / 2;
+	border += border & 1; /* make the border even */
+
+	mode->crtc_hdisplay = width;
+	mode->crtc_hblank_start = width + border;
+	mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width;
+
+	mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos;
+	mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width;
+}
+
+static void
+centre_vertically(struct drm_display_mode *mode,
+		  int height)
+{
+	u32 border, sync_pos, blank_width, sync_width;
+
+	/* keep the vsync and vblank widths constant */
+	sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	sync_pos = (blank_width - sync_width + 1) / 2;
+
+	border = (mode->vdisplay - height + 1) / 2;
+
+	mode->crtc_vdisplay = height;
+	mode->crtc_vblank_start = height + border;
+	mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width;
+
+	mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos;
+	mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width;
+}
+
+static inline u32 panel_fitter_scaling(u32 source, u32 target)
+{
+	/*
+	 * Floating point operation is not supported. So the FACTOR
+	 * is defined, which can avoid the floating point computation
+	 * when calculating the panel ratio.
+	 */
+#define ACCURACY 12
+#define FACTOR (1 << ACCURACY)
+	u32 ratio = source * FACTOR / target;
+	return (FACTOR * ratio + FACTOR/2) / FACTOR;
+}
+
 static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 				  struct drm_display_mode *mode,
 				  struct drm_display_mode *adjusted_mode)
 {
-	/*
-	 * float point operation is not supported . So the PANEL_RATIO_FACTOR
-	 * is defined, which can avoid the float point computation when
-	 * calculating the panel ratio.
-	 */
-#define PANEL_RATIO_FACTOR 8192
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct drm_encoder *tmp_encoder;
 	struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 	struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
-	u32 pfit_control = 0, pfit_pgm_ratios = 0;
-	int left_border = 0, right_border = 0, top_border = 0;
-	int bottom_border = 0;
-	bool border = 0;
-	int panel_ratio, desired_ratio, vert_scale, horiz_scale;
-	int horiz_ratio, vert_ratio;
-	u32 hsync_width, vsync_width;
-	u32 hblank_width, vblank_width;
-	u32 hsync_pos, vsync_pos;
+	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
 
 	/* Should never happen!! */
 	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
@@ -200,27 +242,25 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 	if (dev_priv->panel_fixed_mode == NULL)
 		return true;
 	/*
-	 * If we have timings from the BIOS for the panel, put them in
+	 * We have timings from the BIOS for the panel, put them in
 	 * to the adjusted mode.  The CRTC will be set up for this mode,
 	 * with the panel scaling set up to source from the H/VDisplay
 	 * of the original mode.
 	 */
-	if (dev_priv->panel_fixed_mode != NULL) {
-		adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
-		adjusted_mode->hsync_start =
-			dev_priv->panel_fixed_mode->hsync_start;
-		adjusted_mode->hsync_end =
-			dev_priv->panel_fixed_mode->hsync_end;
-		adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
-		adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
-		adjusted_mode->vsync_start =
-			dev_priv->panel_fixed_mode->vsync_start;
-		adjusted_mode->vsync_end =
-			dev_priv->panel_fixed_mode->vsync_end;
-		adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
-		adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
-		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
-	}
+	adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
+	adjusted_mode->hsync_start =
+		dev_priv->panel_fixed_mode->hsync_start;
+	adjusted_mode->hsync_end =
+		dev_priv->panel_fixed_mode->hsync_end;
+	adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
+	adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
+	adjusted_mode->vsync_start =
+		dev_priv->panel_fixed_mode->vsync_start;
+	adjusted_mode->vsync_end =
+		dev_priv->panel_fixed_mode->vsync_end;
+	adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
+	adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
+	drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
 
 	/* Make sure pre-965s set dither correctly */
 	if (!IS_I965G(dev)) {
@@ -230,11 +270,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	/* Native modes don't need fitting */
 	if (adjusted_mode->hdisplay == mode->hdisplay &&
-			adjusted_mode->vdisplay == mode->vdisplay) {
-		pfit_pgm_ratios = 0;
-		border = 0;
+	    adjusted_mode->vdisplay == mode->vdisplay)
 		goto out;
-	}
 
 	/* full screen scale for now */
 	if (HAS_PCH_SPLIT(dev))
@@ -242,25 +279,9 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	/* 965+ wants fuzzy fitting */
 	if (IS_I965G(dev))
-		pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
-					PFIT_FILTER_FUZZY;
-
-	hsync_width = adjusted_mode->crtc_hsync_end -
-					adjusted_mode->crtc_hsync_start;
-	vsync_width = adjusted_mode->crtc_vsync_end -
-					adjusted_mode->crtc_vsync_start;
-	hblank_width = adjusted_mode->crtc_hblank_end -
-					adjusted_mode->crtc_hblank_start;
-	vblank_width = adjusted_mode->crtc_vblank_end -
-					adjusted_mode->crtc_vblank_start;
-	/*
-	 * Deal with panel fitting options. Figure out how to stretch the
-	 * image based on its aspect ratio & the current panel fitting mode.
-	 */
-	panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
-				adjusted_mode->vdisplay;
-	desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
-				mode->vdisplay;
+		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+				 PFIT_FILTER_FUZZY);
+
 	/*
 	 * Enable automatic panel scaling for non-native modes so that they fill
 	 * the screen.  Should be enabled before the pipe is enabled, according
@@ -278,170 +299,63 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 		 * For centered modes, we have to calculate border widths &
 		 * heights and modify the values programmed into the CRTC.
 		 */
-		left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
-		right_border = left_border;
-		if (mode->hdisplay & 1)
-			right_border++;
-		top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
-		bottom_border = top_border;
-		if (mode->vdisplay & 1)
-			bottom_border++;
-		/* Set active & border values */
-		adjusted_mode->crtc_hdisplay = mode->hdisplay;
-		/* Keep the boder be even */
-		if (right_border & 1)
-			right_border++;
-		/* use the border directly instead of border minuse one */
-		adjusted_mode->crtc_hblank_start = mode->hdisplay +
-						right_border;
-		/* keep the blank width constant */
-		adjusted_mode->crtc_hblank_end =
-			adjusted_mode->crtc_hblank_start + hblank_width;
-		/* get the hsync pos relative to hblank start */
-		hsync_pos = (hblank_width - hsync_width) / 2;
-		/* keep the hsync pos be even */
-		if (hsync_pos & 1)
-			hsync_pos++;
-		adjusted_mode->crtc_hsync_start =
-				adjusted_mode->crtc_hblank_start + hsync_pos;
-		/* keep the hsync width constant */
-		adjusted_mode->crtc_hsync_end =
-				adjusted_mode->crtc_hsync_start + hsync_width;
-		adjusted_mode->crtc_vdisplay = mode->vdisplay;
-		/* use the border instead of border minus one */
-		adjusted_mode->crtc_vblank_start = mode->vdisplay +
-						bottom_border;
-		/* keep the vblank width constant */
-		adjusted_mode->crtc_vblank_end =
-				adjusted_mode->crtc_vblank_start + vblank_width;
-		/* get the vsync start postion relative to vblank start */
-		vsync_pos = (vblank_width - vsync_width) / 2;
-		adjusted_mode->crtc_vsync_start =
-				adjusted_mode->crtc_vblank_start + vsync_pos;
-		/* keep the vsync width constant */
-		adjusted_mode->crtc_vsync_end =
-				adjusted_mode->crtc_vsync_start + vsync_width;
-		border = 1;
+		centre_horizontally(adjusted_mode, mode->hdisplay);
+		centre_vertically(adjusted_mode, mode->vdisplay);
+		border = LVDS_BORDER_ENABLE;
 		break;
+
 	case DRM_MODE_SCALE_ASPECT:
-		/* Scale but preserve the spect ratio */
-		pfit_control |= PFIT_ENABLE;
+		/* Scale but preserve the aspect ratio */
 		if (IS_I965G(dev)) {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+
+			pfit_control |= PFIT_ENABLE;
 			/* 965+ is easy, it does everything in hw */
-			if (panel_ratio > desired_ratio)
+			if (scaled_width > scaled_height)
 				pfit_control |= PFIT_SCALING_PILLAR;
-			else if (panel_ratio < desired_ratio)
+			else if (scaled_width < scaled_height)
 				pfit_control |= PFIT_SCALING_LETTER;
 			else
 				pfit_control |= PFIT_SCALING_AUTO;
 		} else {
+			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
+			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
 			/*
 			 * For earlier chips we have to calculate the scaling
 			 * ratio by hand and program it into the
 			 * PFIT_PGM_RATIO register
 			 */
-			u32 horiz_bits, vert_bits, bits = 12;
-			horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
-						adjusted_mode->hdisplay;
-			vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
-						adjusted_mode->vdisplay;
-			horiz_scale = adjusted_mode->hdisplay *
-					PANEL_RATIO_FACTOR / mode->hdisplay;
-			vert_scale = adjusted_mode->vdisplay *
-					PANEL_RATIO_FACTOR / mode->vdisplay;
-
-			/* retain aspect ratio */
-			if (panel_ratio > desired_ratio) { /* Pillar */
-				u32 scaled_width;
-				scaled_width = mode->hdisplay * vert_scale /
-						PANEL_RATIO_FACTOR;
-				horiz_ratio = vert_ratio;
-				pfit_control |= (VERT_AUTO_SCALE |
-						 VERT_INTERP_BILINEAR |
-						 HORIZ_INTERP_BILINEAR);
-				/* Pillar will have left/right borders */
-				left_border = (adjusted_mode->hdisplay -
-						scaled_width) / 2;
-				right_border = left_border;
-				if (mode->hdisplay & 1) /* odd resolutions */
-					right_border++;
-				/* keep the border be even */
-				if (right_border & 1)
-					right_border++;
-				adjusted_mode->crtc_hdisplay = scaled_width;
-				/* use border instead of border minus one */
-				adjusted_mode->crtc_hblank_start =
-					scaled_width + right_border;
-				/* keep the hblank width constant */
-				adjusted_mode->crtc_hblank_end =
-					adjusted_mode->crtc_hblank_start +
-							hblank_width;
-				/*
-				 * get the hsync start pos relative to
-				 * hblank start
-				 */
-				hsync_pos = (hblank_width - hsync_width) / 2;
-				/* keep the hsync_pos be even */
-				if (hsync_pos & 1)
-					hsync_pos++;
-				adjusted_mode->crtc_hsync_start =
-					adjusted_mode->crtc_hblank_start +
-							hsync_pos;
-				/* keept hsync width constant */
-				adjusted_mode->crtc_hsync_end =
-					adjusted_mode->crtc_hsync_start +
-							hsync_width;
-				border = 1;
-			} else if (panel_ratio < desired_ratio) { /* letter */
-				u32 scaled_height = mode->vdisplay *
-					horiz_scale / PANEL_RATIO_FACTOR;
-				vert_ratio = horiz_ratio;
-				pfit_control |= (HORIZ_AUTO_SCALE |
-						 VERT_INTERP_BILINEAR |
-						 HORIZ_INTERP_BILINEAR);
-				/* Letterbox will have top/bottom border */
-				top_border = (adjusted_mode->vdisplay -
-					scaled_height) / 2;
-				bottom_border = top_border;
-				if (mode->vdisplay & 1)
-					bottom_border++;
-				adjusted_mode->crtc_vdisplay = scaled_height;
-				/* use border instead of border minus one */
-				adjusted_mode->crtc_vblank_start =
-					scaled_height + bottom_border;
-				/* keep the vblank width constant */
-				adjusted_mode->crtc_vblank_end =
-					adjusted_mode->crtc_vblank_start +
-							vblank_width;
-				/*
-				 * get the vsync start pos relative to
-				 * vblank start
-				 */
-				vsync_pos = (vblank_width - vsync_width) / 2;
-				adjusted_mode->crtc_vsync_start =
-					adjusted_mode->crtc_vblank_start +
-							vsync_pos;
-				/* keep the vsync width constant */
-				adjusted_mode->crtc_vsync_end =
-					adjusted_mode->crtc_vsync_start +
-							vsync_width;
-				border = 1;
-			} else {
-			/* Aspects match, Let hw scale both directions */
-				pfit_control |= (VERT_AUTO_SCALE |
-						 HORIZ_AUTO_SCALE |
+			if (scaled_width > scaled_height) { /* pillar */
+				centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->vdisplay != adjusted_mode->vdisplay) {
+					u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else if (scaled_width < scaled_height) { /* letter */
+				centre_vertically(adjusted_mode, scaled_width / mode->hdisplay);
+
+				border = LVDS_BORDER_ENABLE;
+				if (mode->hdisplay != adjusted_mode->hdisplay) {
+					u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
+							    bits << PFIT_VERT_SCALE_SHIFT);
+					pfit_control |= (PFIT_ENABLE |
+							 VERT_INTERP_BILINEAR |
+							 HORIZ_INTERP_BILINEAR);
+				}
+			} else
+				/* Aspects match, Let hw scale both directions */
+				pfit_control |= (PFIT_ENABLE |
+						 VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
 						 VERT_INTERP_BILINEAR |
 						 HORIZ_INTERP_BILINEAR);
-			}
-			horiz_bits = (1 << bits) * horiz_ratio /
-					PANEL_RATIO_FACTOR;
-			vert_bits = (1 << bits) * vert_ratio /
-					PANEL_RATIO_FACTOR;
-			pfit_pgm_ratios =
-				((vert_bits << PFIT_VERT_SCALE_SHIFT) &
-						PFIT_VERT_SCALE_MASK) |
-				((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
-						PFIT_HORIZ_SCALE_MASK);
 		}
 		break;
 
@@ -458,6 +372,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 					 VERT_INTERP_BILINEAR |
 					 HORIZ_INTERP_BILINEAR);
 		break;
+
 	default:
 		break;
 	}
@@ -465,14 +380,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
 out:
 	lvds_priv->pfit_control = pfit_control;
 	lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
-	/*
-	 * When there exists the border, it means that the LVDS_BORDR
-	 * should be enabled.
-	 */
-	if (border)
-		dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
-	else
-		dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
+	dev_priv->lvds_border_bits = border;
+
 	/*
 	 * XXX: It would be nice to support lower refresh rates on the
 	 * panels to reduce power consumption, and perhaps match the
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index d7ad5139d17..d39aea24eab 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -65,7 +65,7 @@
 #define OCMD_YUV_410_PLANAR	(0xe<<10) /* also 411 */
 #define OCMD_TVSYNCFLIP_PARITY	(0x1<<9)
 #define OCMD_TVSYNCFLIP_ENABLE	(0x1<<7)
-#define OCMD_BUF_TYPE_MASK	(Ox1<<5)
+#define OCMD_BUF_TYPE_MASK	(0x1<<5)
 #define OCMD_BUF_TYPE_FRAME	(0x0<<5)
 #define OCMD_BUF_TYPE_FIELD	(0x1<<5)
 #define OCMD_TEST_MODE		(0x1<<4)
@@ -185,7 +185,8 @@ static struct overlay_registers *intel_overlay_map_regs_atomic(struct intel_over
 
 	if (OVERLAY_NONPHYSICAL(overlay->dev)) {
 		regs = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
-				overlay->reg_bo->gtt_offset);
+						overlay->reg_bo->gtt_offset,
+						KM_USER0);
 
 		if (!regs) {
 			DRM_ERROR("failed to map overlay regs in GTT\n");
@@ -200,7 +201,7 @@ static struct overlay_registers *intel_overlay_map_regs_atomic(struct intel_over
 static void intel_overlay_unmap_regs_atomic(struct intel_overlay *overlay)
 {
 	if (OVERLAY_NONPHYSICAL(overlay->dev))
-		io_mapping_unmap_atomic(overlay->virt_addr);
+		io_mapping_unmap_atomic(overlay->virt_addr, KM_USER0);
 
 	overlay->virt_addr = NULL;
 
@@ -958,7 +959,7 @@ static int check_overlay_src(struct drm_device *dev,
 	    || rec->src_width < N_HORIZ_Y_TAPS*4)
 		return -EINVAL;
 
-	/* check alingment constrains */
+	/* check alignment constraints */
 	switch (rec->flags & I915_OVERLAY_TYPE_MASK) {
 		case I915_OVERLAY_RGB:
 			/* not implemented */
@@ -990,7 +991,10 @@ static int check_overlay_src(struct drm_device *dev,
 		return -EINVAL;
 
 	/* stride checking */
-	stride_mask = 63;
+	if (IS_I830(dev) || IS_845G(dev))
+		stride_mask = 255;
+	else
+		stride_mask = 63;
 
 	if (rec->stride_Y & stride_mask || rec->stride_UV & stride_mask)
 		return -EINVAL;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 03c231be227..d9d4d51aa89 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1237,9 +1237,11 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 
 	/* Set the SDVO control regs. */
 	if (IS_I965G(dev)) {
-		sdvox |= SDVO_BORDER_ENABLE |
-			SDVO_VSYNC_ACTIVE_HIGH |
-			SDVO_HSYNC_ACTIVE_HIGH;
+		sdvox |= SDVO_BORDER_ENABLE;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			sdvox |= SDVO_VSYNC_ACTIVE_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			sdvox |= SDVO_HSYNC_ACTIVE_HIGH;
 	} else {
 		sdvox |= I915_READ(sdvo_priv->sdvo_reg);
 		switch (sdvo_priv->sdvo_reg) {
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index d2d4e4045ca..cc3726a4a1c 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -476,7 +476,7 @@ static const struct tv_mode tv_modes[] = {
 		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
 		.nbr_end	= 240,
 
-		.burst_ena	= 8,
+		.burst_ena	= true,
 		.hburst_start	= 72,		    .hburst_len		= 34,
 		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
 		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
@@ -896,8 +896,6 @@ static const struct tv_mode tv_modes[] = {
 	},
 };
 
-#define NUM_TV_MODES sizeof(tv_modes) / sizeof (tv_modes[0])
-
 static void
 intel_tv_dpms(struct drm_encoder *encoder, int mode)
 {
@@ -1512,7 +1510,7 @@ intel_tv_set_property(struct drm_connector *connector, struct drm_property *prop
 		tv_priv->margin[TV_MARGIN_BOTTOM] = val;
 		changed = true;
 	} else if (property == dev->mode_config.tv_mode_property) {
-		if (val >= NUM_TV_MODES) {
+		if (val >= ARRAY_SIZE(tv_modes)) {
 			ret = -EINVAL;
 			goto out;
 		}
@@ -1693,13 +1691,13 @@ intel_tv_init(struct drm_device *dev)
 	connector->doublescan_allowed = false;
 
 	/* Create TV properties then attach current values */
-	tv_format_names = kmalloc(sizeof(char *) * NUM_TV_MODES,
+	tv_format_names = kmalloc(sizeof(char *) * ARRAY_SIZE(tv_modes),
 				  GFP_KERNEL);
 	if (!tv_format_names)
 		goto out;
-	for (i = 0; i < NUM_TV_MODES; i++)
+	for (i = 0; i < ARRAY_SIZE(tv_modes); i++)
 		tv_format_names[i] = tv_modes[i].name;
-	drm_mode_create_tv_properties(dev, NUM_TV_MODES, tv_format_names);
+	drm_mode_create_tv_properties(dev, ARRAY_SIZE(tv_modes), tv_format_names);
 
 	drm_connector_attach_property(connector, dev->mode_config.tv_mode_property,
 				   initial_mode);
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index 3c917fb3a60..08868ac3048 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -52,7 +52,7 @@ static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup);
  * Engine control
  */
 
-int mga_do_wait_for_idle(drm_mga_private_t * dev_priv)
+int mga_do_wait_for_idle(drm_mga_private_t *dev_priv)
 {
 	u32 status = 0;
 	int i;
@@ -74,7 +74,7 @@ int mga_do_wait_for_idle(drm_mga_private_t * dev_priv)
 	return -EBUSY;
 }
 
-static int mga_do_dma_reset(drm_mga_private_t * dev_priv)
+static int mga_do_dma_reset(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_primary_buffer_t *primary = &dev_priv->prim;
@@ -102,7 +102,7 @@ static int mga_do_dma_reset(drm_mga_private_t * dev_priv)
  * Primary DMA stream
  */
 
-void mga_do_dma_flush(drm_mga_private_t * dev_priv)
+void mga_do_dma_flush(drm_mga_private_t *dev_priv)
 {
 	drm_mga_primary_buffer_t *primary = &dev_priv->prim;
 	u32 head, tail;
@@ -142,11 +142,10 @@ void mga_do_dma_flush(drm_mga_private_t * dev_priv)
 
 	head = MGA_READ(MGA_PRIMADDRESS);
 
-	if (head <= tail) {
+	if (head <= tail)
 		primary->space = primary->size - primary->tail;
-	} else {
+	else
 		primary->space = head - tail;
-	}
 
 	DRM_DEBUG("   head = 0x%06lx\n", (unsigned long)(head - dev_priv->primary->offset));
 	DRM_DEBUG("   tail = 0x%06lx\n", (unsigned long)(tail - dev_priv->primary->offset));
@@ -158,7 +157,7 @@ void mga_do_dma_flush(drm_mga_private_t * dev_priv)
 	DRM_DEBUG("done.\n");
 }
 
-void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv)
+void mga_do_dma_wrap_start(drm_mga_private_t *dev_priv)
 {
 	drm_mga_primary_buffer_t *primary = &dev_priv->prim;
 	u32 head, tail;
@@ -181,11 +180,10 @@ void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv)
 
 	head = MGA_READ(MGA_PRIMADDRESS);
 
-	if (head == dev_priv->primary->offset) {
+	if (head == dev_priv->primary->offset)
 		primary->space = primary->size;
-	} else {
+	else
 		primary->space = head - dev_priv->primary->offset;
-	}
 
 	DRM_DEBUG("   head = 0x%06lx\n", (unsigned long)(head - dev_priv->primary->offset));
 	DRM_DEBUG("   tail = 0x%06x\n", primary->tail);
@@ -199,7 +197,7 @@ void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv)
 	DRM_DEBUG("done.\n");
 }
 
-void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv)
+void mga_do_dma_wrap_end(drm_mga_private_t *dev_priv)
 {
 	drm_mga_primary_buffer_t *primary = &dev_priv->prim;
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -220,11 +218,11 @@ void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv)
  * Freelist management
  */
 
-#define MGA_BUFFER_USED		~0
+#define MGA_BUFFER_USED		(~0)
 #define MGA_BUFFER_FREE		0
 
 #if MGA_FREELIST_DEBUG
-static void mga_freelist_print(struct drm_device * dev)
+static void mga_freelist_print(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_freelist_t *entry;
@@ -245,7 +243,7 @@ static void mga_freelist_print(struct drm_device * dev)
 }
 #endif
 
-static int mga_freelist_init(struct drm_device * dev, drm_mga_private_t * dev_priv)
+static int mga_freelist_init(struct drm_device *dev, drm_mga_private_t *dev_priv)
 {
 	struct drm_device_dma *dma = dev->dma;
 	struct drm_buf *buf;
@@ -288,7 +286,7 @@ static int mga_freelist_init(struct drm_device * dev, drm_mga_private_t * dev_pr
 	return 0;
 }
 
-static void mga_freelist_cleanup(struct drm_device * dev)
+static void mga_freelist_cleanup(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_freelist_t *entry;
@@ -308,7 +306,7 @@ static void mga_freelist_cleanup(struct drm_device * dev)
 #if 0
 /* FIXME: Still needed?
  */
-static void mga_freelist_reset(struct drm_device * dev)
+static void mga_freelist_reset(struct drm_device *dev)
 {
 	struct drm_device_dma *dma = dev->dma;
 	struct drm_buf *buf;
@@ -356,7 +354,7 @@ static struct drm_buf *mga_freelist_get(struct drm_device * dev)
 	return NULL;
 }
 
-int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf)
+int mga_freelist_put(struct drm_device *dev, struct drm_buf *buf)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_buf_priv_t *buf_priv = buf->dev_private;
@@ -391,7 +389,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf)
  * DMA initialization, cleanup
  */
 
-int mga_driver_load(struct drm_device * dev, unsigned long flags)
+int mga_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	drm_mga_private_t *dev_priv;
 	int ret;
@@ -405,8 +403,8 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags)
 	dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
 	dev_priv->chipset = flags;
 
-	dev_priv->mmio_base = drm_get_resource_start(dev, 1);
-	dev_priv->mmio_size = drm_get_resource_len(dev, 1);
+	dev_priv->mmio_base = pci_resource_start(dev->pdev, 1);
+	dev_priv->mmio_size = pci_resource_len(dev->pdev, 1);
 
 	dev->counters += 3;
 	dev->types[6] = _DRM_STAT_IRQ;
@@ -439,8 +437,8 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags)
  *
  * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
  */
-static int mga_do_agp_dma_bootstrap(struct drm_device * dev,
-				    drm_mga_dma_bootstrap_t * dma_bs)
+static int mga_do_agp_dma_bootstrap(struct drm_device *dev,
+				    drm_mga_dma_bootstrap_t *dma_bs)
 {
 	drm_mga_private_t *const dev_priv =
 	    (drm_mga_private_t *) dev->dev_private;
@@ -481,11 +479,10 @@ static int mga_do_agp_dma_bootstrap(struct drm_device * dev,
 	 */
 
 	if (dev_priv->chipset == MGA_CARD_TYPE_G200) {
-		if (mode.mode & 0x02) {
+		if (mode.mode & 0x02)
 			MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE);
-		} else {
+		else
 			MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE);
-		}
 	}
 
 	/* Allocate and bind AGP memory. */
@@ -593,8 +590,8 @@ static int mga_do_agp_dma_bootstrap(struct drm_device * dev,
 	return 0;
 }
 #else
-static int mga_do_agp_dma_bootstrap(struct drm_device * dev,
-				    drm_mga_dma_bootstrap_t * dma_bs)
+static int mga_do_agp_dma_bootstrap(struct drm_device *dev,
+				    drm_mga_dma_bootstrap_t *dma_bs)
 {
 	return -EINVAL;
 }
@@ -614,8 +611,8 @@ static int mga_do_agp_dma_bootstrap(struct drm_device * dev,
  *
  * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
  */
-static int mga_do_pci_dma_bootstrap(struct drm_device * dev,
-				    drm_mga_dma_bootstrap_t * dma_bs)
+static int mga_do_pci_dma_bootstrap(struct drm_device *dev,
+				    drm_mga_dma_bootstrap_t *dma_bs)
 {
 	drm_mga_private_t *const dev_priv =
 	    (drm_mga_private_t *) dev->dev_private;
@@ -678,9 +675,8 @@ static int mga_do_pci_dma_bootstrap(struct drm_device * dev,
 		req.size = dma_bs->secondary_bin_size;
 
 		err = drm_addbufs_pci(dev, &req);
-		if (!err) {
+		if (!err)
 			break;
-		}
 	}
 
 	if (bin_count == 0) {
@@ -704,8 +700,8 @@ static int mga_do_pci_dma_bootstrap(struct drm_device * dev,
 	return 0;
 }
 
-static int mga_do_dma_bootstrap(struct drm_device * dev,
-				drm_mga_dma_bootstrap_t * dma_bs)
+static int mga_do_dma_bootstrap(struct drm_device *dev,
+				drm_mga_dma_bootstrap_t *dma_bs)
 {
 	const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev);
 	int err;
@@ -737,17 +733,15 @@ static int mga_do_dma_bootstrap(struct drm_device * dev,
 	 * carve off portions of it for internal uses.  The remaining memory
 	 * is returned to user-mode to be used for AGP textures.
 	 */
-	if (is_agp) {
+	if (is_agp)
 		err = mga_do_agp_dma_bootstrap(dev, dma_bs);
-	}
 
 	/* If we attempted to initialize the card for AGP DMA but failed,
 	 * clean-up any mess that may have been created.
 	 */
 
-	if (err) {
+	if (err)
 		mga_do_cleanup_dma(dev, MINIMAL_CLEANUP);
-	}
 
 	/* Not only do we want to try and initialized PCI cards for PCI DMA,
 	 * but we also try to initialized AGP cards that could not be
@@ -757,9 +751,8 @@ static int mga_do_dma_bootstrap(struct drm_device * dev,
 	 * AGP memory, etc.
 	 */
 
-	if (!is_agp || err) {
+	if (!is_agp || err)
 		err = mga_do_pci_dma_bootstrap(dev, dma_bs);
-	}
 
 	return err;
 }
@@ -792,7 +785,7 @@ int mga_dma_bootstrap(struct drm_device *dev, void *data,
 	return err;
 }
 
-static int mga_do_init_dma(struct drm_device * dev, drm_mga_init_t * init)
+static int mga_do_init_dma(struct drm_device *dev, drm_mga_init_t *init)
 {
 	drm_mga_private_t *dev_priv;
 	int ret;
@@ -800,11 +793,10 @@ static int mga_do_init_dma(struct drm_device * dev, drm_mga_init_t * init)
 
 	dev_priv = dev->dev_private;
 
-	if (init->sgram) {
+	if (init->sgram)
 		dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK;
-	} else {
+	else
 		dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR;
-	}
 	dev_priv->maccess = init->maccess;
 
 	dev_priv->fb_cpp = init->fb_cpp;
@@ -975,9 +967,8 @@ static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup)
 				dev_priv->agp_handle = 0;
 			}
 
-			if ((dev->agp != NULL) && dev->agp->acquired) {
+			if ((dev->agp != NULL) && dev->agp->acquired)
 				err = drm_agp_release(dev);
-			}
 #endif
 		}
 
@@ -998,9 +989,8 @@ static int mga_do_cleanup_dma(struct drm_device *dev, int full_cleanup)
 		memset(dev_priv->warp_pipe_phys, 0,
 		       sizeof(dev_priv->warp_pipe_phys));
 
-		if (dev_priv->head != NULL) {
+		if (dev_priv->head != NULL)
 			mga_freelist_cleanup(dev);
-		}
 	}
 
 	return err;
@@ -1017,9 +1007,8 @@ int mga_dma_init(struct drm_device *dev, void *data,
 	switch (init->func) {
 	case MGA_INIT_DMA:
 		err = mga_do_init_dma(dev, init);
-		if (err) {
+		if (err)
 			(void)mga_do_cleanup_dma(dev, FULL_CLEANUP);
-		}
 		return err;
 	case MGA_CLEANUP_DMA:
 		return mga_do_cleanup_dma(dev, FULL_CLEANUP);
@@ -1047,9 +1036,8 @@ int mga_dma_flush(struct drm_device *dev, void *data,
 
 	WRAP_WAIT_WITH_RETURN(dev_priv);
 
-	if (lock->flags & (_DRM_LOCK_FLUSH | _DRM_LOCK_FLUSH_ALL)) {
+	if (lock->flags & (_DRM_LOCK_FLUSH | _DRM_LOCK_FLUSH_ALL))
 		mga_do_dma_flush(dev_priv);
-	}
 
 	if (lock->flags & _DRM_LOCK_QUIESCENT) {
 #if MGA_DMA_DEBUG
@@ -1079,8 +1067,8 @@ int mga_dma_reset(struct drm_device *dev, void *data,
  * DMA buffer management
  */
 
-static int mga_dma_get_buffers(struct drm_device * dev,
-			       struct drm_file *file_priv, struct drm_dma * d)
+static int mga_dma_get_buffers(struct drm_device *dev,
+			       struct drm_file *file_priv, struct drm_dma *d)
 {
 	struct drm_buf *buf;
 	int i;
@@ -1134,9 +1122,8 @@ int mga_dma_buffers(struct drm_device *dev, void *data,
 
 	d->granted_count = 0;
 
-	if (d->request_count) {
+	if (d->request_count)
 		ret = mga_dma_get_buffers(dev, file_priv, d);
-	}
 
 	return ret;
 }
@@ -1144,7 +1131,7 @@ int mga_dma_buffers(struct drm_device *dev, void *data,
 /**
  * Called just before the module is unloaded.
  */
-int mga_driver_unload(struct drm_device * dev)
+int mga_driver_unload(struct drm_device *dev)
 {
 	kfree(dev->dev_private);
 	dev->dev_private = NULL;
@@ -1155,12 +1142,12 @@ int mga_driver_unload(struct drm_device * dev)
 /**
  * Called when the last opener of the device is closed.
  */
-void mga_driver_lastclose(struct drm_device * dev)
+void mga_driver_lastclose(struct drm_device *dev)
 {
 	mga_do_cleanup_dma(dev, FULL_CLEANUP);
 }
 
-int mga_driver_dma_quiescent(struct drm_device * dev)
+int mga_driver_dma_quiescent(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	return mga_do_wait_for_idle(dev_priv);
diff --git a/drivers/gpu/drm/mga/mga_drv.c b/drivers/gpu/drm/mga/mga_drv.c
index ddfe16197b5..26d0d8ced80 100644
--- a/drivers/gpu/drm/mga/mga_drv.c
+++ b/drivers/gpu/drm/mga/mga_drv.c
@@ -36,7 +36,7 @@
 
 #include "drm_pciids.h"
 
-static int mga_driver_device_is_agp(struct drm_device * dev);
+static int mga_driver_device_is_agp(struct drm_device *dev);
 
 static struct pci_device_id pciidlist[] = {
 	mga_PCI_IDS
@@ -119,7 +119,7 @@ MODULE_LICENSE("GPL and additional rights");
  * \returns
  * If the device is a PCI G450, zero is returned.  Otherwise 2 is returned.
  */
-static int mga_driver_device_is_agp(struct drm_device * dev)
+static int mga_driver_device_is_agp(struct drm_device *dev)
 {
 	const struct pci_dev *const pdev = dev->pdev;
 
diff --git a/drivers/gpu/drm/mga/mga_drv.h b/drivers/gpu/drm/mga/mga_drv.h
index be6c6b9b0e8..1084fa4d261 100644
--- a/drivers/gpu/drm/mga/mga_drv.h
+++ b/drivers/gpu/drm/mga/mga_drv.h
@@ -164,59 +164,59 @@ extern int mga_dma_reset(struct drm_device *dev, void *data,
 extern int mga_dma_buffers(struct drm_device *dev, void *data,
 			   struct drm_file *file_priv);
 extern int mga_driver_load(struct drm_device *dev, unsigned long flags);
-extern int mga_driver_unload(struct drm_device * dev);
-extern void mga_driver_lastclose(struct drm_device * dev);
-extern int mga_driver_dma_quiescent(struct drm_device * dev);
+extern int mga_driver_unload(struct drm_device *dev);
+extern void mga_driver_lastclose(struct drm_device *dev);
+extern int mga_driver_dma_quiescent(struct drm_device *dev);
 
-extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv);
+extern int mga_do_wait_for_idle(drm_mga_private_t *dev_priv);
 
-extern void mga_do_dma_flush(drm_mga_private_t * dev_priv);
-extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv);
-extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv);
+extern void mga_do_dma_flush(drm_mga_private_t *dev_priv);
+extern void mga_do_dma_wrap_start(drm_mga_private_t *dev_priv);
+extern void mga_do_dma_wrap_end(drm_mga_private_t *dev_priv);
 
-extern int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf);
+extern int mga_freelist_put(struct drm_device *dev, struct drm_buf *buf);
 
 				/* mga_warp.c */
-extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv);
-extern int mga_warp_init(drm_mga_private_t * dev_priv);
+extern int mga_warp_install_microcode(drm_mga_private_t *dev_priv);
+extern int mga_warp_init(drm_mga_private_t *dev_priv);
 
 				/* mga_irq.c */
 extern int mga_enable_vblank(struct drm_device *dev, int crtc);
 extern void mga_disable_vblank(struct drm_device *dev, int crtc);
 extern u32 mga_get_vblank_counter(struct drm_device *dev, int crtc);
-extern int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence);
-extern int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
+extern int mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence);
+extern int mga_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence);
 extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS);
-extern void mga_driver_irq_preinstall(struct drm_device * dev);
+extern void mga_driver_irq_preinstall(struct drm_device *dev);
 extern int mga_driver_irq_postinstall(struct drm_device *dev);
-extern void mga_driver_irq_uninstall(struct drm_device * dev);
+extern void mga_driver_irq_uninstall(struct drm_device *dev);
 extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
 			     unsigned long arg);
 
 #define mga_flush_write_combine()	DRM_WRITEMEMORYBARRIER()
 
 #if defined(__linux__) && defined(__alpha__)
-#define MGA_BASE( reg )		((unsigned long)(dev_priv->mmio->handle))
-#define MGA_ADDR( reg )		(MGA_BASE(reg) + reg)
+#define MGA_BASE(reg)		((unsigned long)(dev_priv->mmio->handle))
+#define MGA_ADDR(reg)		(MGA_BASE(reg) + reg)
 
-#define MGA_DEREF( reg )	*(volatile u32 *)MGA_ADDR( reg )
-#define MGA_DEREF8( reg )	*(volatile u8 *)MGA_ADDR( reg )
+#define MGA_DEREF(reg)		(*(volatile u32 *)MGA_ADDR(reg))
+#define MGA_DEREF8(reg)		(*(volatile u8 *)MGA_ADDR(reg))
 
-#define MGA_READ( reg )		(_MGA_READ((u32 *)MGA_ADDR(reg)))
-#define MGA_READ8( reg )	(_MGA_READ((u8 *)MGA_ADDR(reg)))
-#define MGA_WRITE( reg, val )	do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF( reg ) = val; } while (0)
-#define MGA_WRITE8( reg, val )  do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8( reg ) = val; } while (0)
+#define MGA_READ(reg)		(_MGA_READ((u32 *)MGA_ADDR(reg)))
+#define MGA_READ8(reg)		(_MGA_READ((u8 *)MGA_ADDR(reg)))
+#define MGA_WRITE(reg, val)	do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0)
+#define MGA_WRITE8(reg, val)	do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0)
 
-static inline u32 _MGA_READ(u32 * addr)
+static inline u32 _MGA_READ(u32 *addr)
 {
 	DRM_MEMORYBARRIER();
 	return *(volatile u32 *)addr;
 }
 #else
-#define MGA_READ8( reg )	DRM_READ8(dev_priv->mmio, (reg))
-#define MGA_READ( reg )		DRM_READ32(dev_priv->mmio, (reg))
-#define MGA_WRITE8( reg, val )  DRM_WRITE8(dev_priv->mmio, (reg), (val))
-#define MGA_WRITE( reg, val )	DRM_WRITE32(dev_priv->mmio, (reg), (val))
+#define MGA_READ8(reg)		DRM_READ8(dev_priv->mmio, (reg))
+#define MGA_READ(reg)		DRM_READ32(dev_priv->mmio, (reg))
+#define MGA_WRITE8(reg, val)	DRM_WRITE8(dev_priv->mmio, (reg), (val))
+#define MGA_WRITE(reg, val)	DRM_WRITE32(dev_priv->mmio, (reg), (val))
 #endif
 
 #define DWGREG0		0x1c00
@@ -233,40 +233,39 @@ static inline u32 _MGA_READ(u32 * addr)
  * Helper macross...
  */
 
-#define MGA_EMIT_STATE( dev_priv, dirty )				\
+#define MGA_EMIT_STATE(dev_priv, dirty)					\
 do {									\
-	if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) {			\
-		if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) {	\
-			mga_g400_emit_state( dev_priv );		\
-		} else {						\
-			mga_g200_emit_state( dev_priv );		\
-		}							\
+	if ((dirty) & ~MGA_UPLOAD_CLIPRECTS) {				\
+		if (dev_priv->chipset >= MGA_CARD_TYPE_G400)		\
+			mga_g400_emit_state(dev_priv);			\
+		else							\
+			mga_g200_emit_state(dev_priv);			\
 	}								\
 } while (0)
 
-#define WRAP_TEST_WITH_RETURN( dev_priv )				\
+#define WRAP_TEST_WITH_RETURN(dev_priv)					\
 do {									\
-	if ( test_bit( 0, &dev_priv->prim.wrapped ) ) {			\
-		if ( mga_is_idle( dev_priv ) ) {			\
-			mga_do_dma_wrap_end( dev_priv );		\
-		} else if ( dev_priv->prim.space <			\
-			    dev_priv->prim.high_mark ) {		\
-			if ( MGA_DMA_DEBUG )				\
-				DRM_INFO( "wrap...\n");		\
-			return -EBUSY;			\
+	if (test_bit(0, &dev_priv->prim.wrapped)) {			\
+		if (mga_is_idle(dev_priv)) {				\
+			mga_do_dma_wrap_end(dev_priv);			\
+		} else if (dev_priv->prim.space <			\
+			   dev_priv->prim.high_mark) {			\
+			if (MGA_DMA_DEBUG)				\
+				DRM_INFO("wrap...\n");			\
+			return -EBUSY;					\
 		}							\
 	}								\
 } while (0)
 
-#define WRAP_WAIT_WITH_RETURN( dev_priv )				\
+#define WRAP_WAIT_WITH_RETURN(dev_priv)					\
 do {									\
-	if ( test_bit( 0, &dev_priv->prim.wrapped ) ) {			\
-		if ( mga_do_wait_for_idle( dev_priv ) < 0 ) {		\
-			if ( MGA_DMA_DEBUG )				\
-				DRM_INFO( "wrap...\n");		\
-			return -EBUSY;			\
+	if (test_bit(0, &dev_priv->prim.wrapped)) {			\
+		if (mga_do_wait_for_idle(dev_priv) < 0) {		\
+			if (MGA_DMA_DEBUG)				\
+				DRM_INFO("wrap...\n");			\
+			return -EBUSY;					\
 		}							\
-		mga_do_dma_wrap_end( dev_priv );			\
+		mga_do_dma_wrap_end(dev_priv);				\
 	}								\
 } while (0)
 
@@ -280,12 +279,12 @@ do {									\
 
 #define DMA_BLOCK_SIZE	(5 * sizeof(u32))
 
-#define BEGIN_DMA( n )							\
+#define BEGIN_DMA(n)							\
 do {									\
-	if ( MGA_VERBOSE ) {						\
-		DRM_INFO( "BEGIN_DMA( %d )\n", (n) );		\
-		DRM_INFO( "   space=0x%x req=0x%Zx\n",			\
-			  dev_priv->prim.space, (n) * DMA_BLOCK_SIZE );	\
+	if (MGA_VERBOSE) {						\
+		DRM_INFO("BEGIN_DMA(%d)\n", (n));			\
+		DRM_INFO("   space=0x%x req=0x%Zx\n",			\
+			 dev_priv->prim.space, (n) * DMA_BLOCK_SIZE);	\
 	}								\
 	prim = dev_priv->prim.start;					\
 	write = dev_priv->prim.tail;					\
@@ -293,9 +292,9 @@ do {									\
 
 #define BEGIN_DMA_WRAP()						\
 do {									\
-	if ( MGA_VERBOSE ) {						\
-		DRM_INFO( "BEGIN_DMA()\n" );				\
-		DRM_INFO( "   space=0x%x\n", dev_priv->prim.space );	\
+	if (MGA_VERBOSE) {						\
+		DRM_INFO("BEGIN_DMA()\n");				\
+		DRM_INFO("   space=0x%x\n", dev_priv->prim.space);	\
 	}								\
 	prim = dev_priv->prim.start;					\
 	write = dev_priv->prim.tail;					\
@@ -304,72 +303,68 @@ do {									\
 #define ADVANCE_DMA()							\
 do {									\
 	dev_priv->prim.tail = write;					\
-	if ( MGA_VERBOSE ) {						\
-		DRM_INFO( "ADVANCE_DMA() tail=0x%05x sp=0x%x\n",	\
-			  write, dev_priv->prim.space );		\
-	}								\
+	if (MGA_VERBOSE)						\
+		DRM_INFO("ADVANCE_DMA() tail=0x%05x sp=0x%x\n",		\
+			 write, dev_priv->prim.space);			\
 } while (0)
 
 #define FLUSH_DMA()							\
 do {									\
-	if ( 0 ) {							\
-		DRM_INFO( "\n" );					\
-		DRM_INFO( "   tail=0x%06x head=0x%06lx\n",		\
-			  dev_priv->prim.tail,				\
-			  (unsigned long)(MGA_READ(MGA_PRIMADDRESS) -	\
-					  dev_priv->primary->offset));	\
+	if (0) {							\
+		DRM_INFO("\n");						\
+		DRM_INFO("   tail=0x%06x head=0x%06lx\n",		\
+			 dev_priv->prim.tail,				\
+			 (unsigned long)(MGA_READ(MGA_PRIMADDRESS) -	\
+					 dev_priv->primary->offset));	\
 	}								\
-	if ( !test_bit( 0, &dev_priv->prim.wrapped ) ) {		\
-		if ( dev_priv->prim.space <				\
-		     dev_priv->prim.high_mark ) {			\
-			mga_do_dma_wrap_start( dev_priv );		\
-		} else {						\
-			mga_do_dma_flush( dev_priv );			\
-		}							\
+	if (!test_bit(0, &dev_priv->prim.wrapped)) {			\
+		if (dev_priv->prim.space < dev_priv->prim.high_mark)	\
+			mga_do_dma_wrap_start(dev_priv);		\
+		else							\
+			mga_do_dma_flush(dev_priv);			\
 	}								\
 } while (0)
 
 /* Never use this, always use DMA_BLOCK(...) for primary DMA output.
  */
-#define DMA_WRITE( offset, val )					\
+#define DMA_WRITE(offset, val)						\
 do {									\
-	if ( MGA_VERBOSE ) {						\
-		DRM_INFO( "   DMA_WRITE( 0x%08x ) at 0x%04Zx\n",	\
-			  (u32)(val), write + (offset) * sizeof(u32) );	\
-	}								\
+	if (MGA_VERBOSE)						\
+		DRM_INFO("   DMA_WRITE( 0x%08x ) at 0x%04Zx\n",		\
+			 (u32)(val), write + (offset) * sizeof(u32));	\
 	*(volatile u32 *)(prim + write + (offset) * sizeof(u32)) = val;	\
 } while (0)
 
-#define DMA_BLOCK( reg0, val0, reg1, val1, reg2, val2, reg3, val3 )	\
+#define DMA_BLOCK(reg0, val0, reg1, val1, reg2, val2, reg3, val3)	\
 do {									\
-	DMA_WRITE( 0, ((DMAREG( reg0 ) << 0) |				\
-		       (DMAREG( reg1 ) << 8) |				\
-		       (DMAREG( reg2 ) << 16) |				\
-		       (DMAREG( reg3 ) << 24)) );			\
-	DMA_WRITE( 1, val0 );						\
-	DMA_WRITE( 2, val1 );						\
-	DMA_WRITE( 3, val2 );						\
-	DMA_WRITE( 4, val3 );						\
+	DMA_WRITE(0, ((DMAREG(reg0) << 0) |				\
+		      (DMAREG(reg1) << 8) |				\
+		      (DMAREG(reg2) << 16) |				\
+		      (DMAREG(reg3) << 24)));				\
+	DMA_WRITE(1, val0);						\
+	DMA_WRITE(2, val1);						\
+	DMA_WRITE(3, val2);						\
+	DMA_WRITE(4, val3);						\
 	write += DMA_BLOCK_SIZE;					\
 } while (0)
 
 /* Buffer aging via primary DMA stream head pointer.
  */
 
-#define SET_AGE( age, h, w )						\
+#define SET_AGE(age, h, w)						\
 do {									\
 	(age)->head = h;						\
 	(age)->wrap = w;						\
 } while (0)
 
-#define TEST_AGE( age, h, w )		( (age)->wrap < w ||		\
-					  ( (age)->wrap == w &&		\
-					    (age)->head < h ) )
+#define TEST_AGE(age, h, w)		((age)->wrap < w ||		\
+					 ((age)->wrap == w &&		\
+					  (age)->head < h))
 
-#define AGE_BUFFER( buf_priv )						\
+#define AGE_BUFFER(buf_priv)						\
 do {									\
 	drm_mga_freelist_t *entry = (buf_priv)->list_entry;		\
-	if ( (buf_priv)->dispatched ) {					\
+	if ((buf_priv)->dispatched) {					\
 		entry->age.head = (dev_priv->prim.tail +		\
 				   dev_priv->primary->offset);		\
 		entry->age.wrap = dev_priv->sarea_priv->last_wrap;	\
@@ -681,7 +676,7 @@ do {									\
 
 /* Simple idle test.
  */
-static __inline__ int mga_is_idle(drm_mga_private_t * dev_priv)
+static __inline__ int mga_is_idle(drm_mga_private_t *dev_priv)
 {
 	u32 status = MGA_READ(MGA_STATUS) & MGA_ENGINE_IDLE_MASK;
 	return (status == MGA_ENDPRDMASTS);
diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c
index daa6041a483..2581202297e 100644
--- a/drivers/gpu/drm/mga/mga_irq.c
+++ b/drivers/gpu/drm/mga/mga_irq.c
@@ -76,9 +76,8 @@ irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS)
 		/* In addition to clearing the interrupt-pending bit, we
 		 * have to write to MGA_PRIMEND to re-start the DMA operation.
 		 */
-		if ((prim_start & ~0x03) != (prim_end & ~0x03)) {
+		if ((prim_start & ~0x03) != (prim_end & ~0x03))
 			MGA_WRITE(MGA_PRIMEND, prim_end);
-		}
 
 		atomic_inc(&dev_priv->last_fence_retired);
 		DRM_WAKEUP(&dev_priv->fence_queue);
@@ -120,7 +119,7 @@ void mga_disable_vblank(struct drm_device *dev, int crtc)
 	/* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */
 }
 
-int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence)
+int mga_driver_fence_wait(struct drm_device *dev, unsigned int *sequence)
 {
 	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
 	unsigned int cur_fence;
@@ -139,7 +138,7 @@ int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence)
 	return ret;
 }
 
-void mga_driver_irq_preinstall(struct drm_device * dev)
+void mga_driver_irq_preinstall(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
 
@@ -162,7 +161,7 @@ int mga_driver_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-void mga_driver_irq_uninstall(struct drm_device * dev)
+void mga_driver_irq_uninstall(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
 	if (!dev_priv)
diff --git a/drivers/gpu/drm/mga/mga_state.c b/drivers/gpu/drm/mga/mga_state.c
index a53b848e0f1..fff82045c42 100644
--- a/drivers/gpu/drm/mga/mga_state.c
+++ b/drivers/gpu/drm/mga/mga_state.c
@@ -41,8 +41,8 @@
  * DMA hardware state programming functions
  */
 
-static void mga_emit_clip_rect(drm_mga_private_t * dev_priv,
-			       struct drm_clip_rect * box)
+static void mga_emit_clip_rect(drm_mga_private_t *dev_priv,
+			       struct drm_clip_rect *box)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_context_regs_t *ctx = &sarea_priv->context_state;
@@ -66,7 +66,7 @@ static void mga_emit_clip_rect(drm_mga_private_t * dev_priv,
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g200_emit_context(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g200_emit_context(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_context_regs_t *ctx = &sarea_priv->context_state;
@@ -89,7 +89,7 @@ static __inline__ void mga_g200_emit_context(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g400_emit_context(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g400_emit_context(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_context_regs_t *ctx = &sarea_priv->context_state;
@@ -116,7 +116,7 @@ static __inline__ void mga_g400_emit_context(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g200_emit_tex0(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g200_emit_tex0(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[0];
@@ -144,7 +144,7 @@ static __inline__ void mga_g200_emit_tex0(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g400_emit_tex0(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g400_emit_tex0(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[0];
@@ -184,7 +184,7 @@ static __inline__ void mga_g400_emit_tex0(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g400_emit_tex1(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g400_emit_tex1(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[1];
@@ -223,7 +223,7 @@ static __inline__ void mga_g400_emit_tex1(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g200_emit_pipe(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int pipe = sarea_priv->warp_pipe;
@@ -250,7 +250,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
+static __inline__ void mga_g400_emit_pipe(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int pipe = sarea_priv->warp_pipe;
@@ -327,7 +327,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
 	ADVANCE_DMA();
 }
 
-static void mga_g200_emit_state(drm_mga_private_t * dev_priv)
+static void mga_g200_emit_state(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int dirty = sarea_priv->dirty;
@@ -348,7 +348,7 @@ static void mga_g200_emit_state(drm_mga_private_t * dev_priv)
 	}
 }
 
-static void mga_g400_emit_state(drm_mga_private_t * dev_priv)
+static void mga_g400_emit_state(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int dirty = sarea_priv->dirty;
@@ -381,7 +381,7 @@ static void mga_g400_emit_state(drm_mga_private_t * dev_priv)
 
 /* Disallow all write destinations except the front and backbuffer.
  */
-static int mga_verify_context(drm_mga_private_t * dev_priv)
+static int mga_verify_context(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_context_regs_t *ctx = &sarea_priv->context_state;
@@ -400,7 +400,7 @@ static int mga_verify_context(drm_mga_private_t * dev_priv)
 
 /* Disallow texture reads from PCI space.
  */
-static int mga_verify_tex(drm_mga_private_t * dev_priv, int unit)
+static int mga_verify_tex(drm_mga_private_t *dev_priv, int unit)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_mga_texture_regs_t *tex = &sarea_priv->tex_state[unit];
@@ -417,7 +417,7 @@ static int mga_verify_tex(drm_mga_private_t * dev_priv, int unit)
 	return 0;
 }
 
-static int mga_verify_state(drm_mga_private_t * dev_priv)
+static int mga_verify_state(drm_mga_private_t *dev_priv)
 {
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int dirty = sarea_priv->dirty;
@@ -446,7 +446,7 @@ static int mga_verify_state(drm_mga_private_t * dev_priv)
 	return (ret == 0);
 }
 
-static int mga_verify_iload(drm_mga_private_t * dev_priv,
+static int mga_verify_iload(drm_mga_private_t *dev_priv,
 			    unsigned int dstorg, unsigned int length)
 {
 	if (dstorg < dev_priv->texture_offset ||
@@ -465,7 +465,7 @@ static int mga_verify_iload(drm_mga_private_t * dev_priv,
 	return 0;
 }
 
-static int mga_verify_blit(drm_mga_private_t * dev_priv,
+static int mga_verify_blit(drm_mga_private_t *dev_priv,
 			   unsigned int srcorg, unsigned int dstorg)
 {
 	if ((srcorg & 0x3) == (MGA_SRCACC_PCI | MGA_SRCMAP_SYSMEM) ||
@@ -480,7 +480,7 @@ static int mga_verify_blit(drm_mga_private_t * dev_priv,
  *
  */
 
-static void mga_dma_dispatch_clear(struct drm_device * dev, drm_mga_clear_t * clear)
+static void mga_dma_dispatch_clear(struct drm_device *dev, drm_mga_clear_t *clear)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -568,7 +568,7 @@ static void mga_dma_dispatch_clear(struct drm_device * dev, drm_mga_clear_t * cl
 	FLUSH_DMA();
 }
 
-static void mga_dma_dispatch_swap(struct drm_device * dev)
+static void mga_dma_dispatch_swap(struct drm_device *dev)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -622,7 +622,7 @@ static void mga_dma_dispatch_swap(struct drm_device * dev)
 	DRM_DEBUG("... done.\n");
 }
 
-static void mga_dma_dispatch_vertex(struct drm_device * dev, struct drm_buf * buf)
+static void mga_dma_dispatch_vertex(struct drm_device *dev, struct drm_buf *buf)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_buf_priv_t *buf_priv = buf->dev_private;
@@ -669,7 +669,7 @@ static void mga_dma_dispatch_vertex(struct drm_device * dev, struct drm_buf * bu
 	FLUSH_DMA();
 }
 
-static void mga_dma_dispatch_indices(struct drm_device * dev, struct drm_buf * buf,
+static void mga_dma_dispatch_indices(struct drm_device *dev, struct drm_buf *buf,
 				     unsigned int start, unsigned int end)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
@@ -718,7 +718,7 @@ static void mga_dma_dispatch_indices(struct drm_device * dev, struct drm_buf * b
 /* This copies a 64 byte aligned agp region to the frambuffer with a
  * standard blit, the ioctl needs to do checking.
  */
-static void mga_dma_dispatch_iload(struct drm_device * dev, struct drm_buf * buf,
+static void mga_dma_dispatch_iload(struct drm_device *dev, struct drm_buf *buf,
 				   unsigned int dstorg, unsigned int length)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
@@ -766,7 +766,7 @@ static void mga_dma_dispatch_iload(struct drm_device * dev, struct drm_buf * buf
 	FLUSH_DMA();
 }
 
-static void mga_dma_dispatch_blit(struct drm_device * dev, drm_mga_blit_t * blit)
+static void mga_dma_dispatch_blit(struct drm_device *dev, drm_mga_blit_t *blit)
 {
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -801,9 +801,8 @@ static void mga_dma_dispatch_blit(struct drm_device * dev, drm_mga_blit_t * blit
 		int w = pbox[i].x2 - pbox[i].x1 - 1;
 		int start;
 
-		if (blit->ydir == -1) {
+		if (blit->ydir == -1)
 			srcy = blit->height - srcy - 1;
-		}
 
 		start = srcy * blit->src_pitch + srcx;
 
diff --git a/drivers/gpu/drm/mga/mga_warp.c b/drivers/gpu/drm/mga/mga_warp.c
index 9aad4847afd..f172bd5c257 100644
--- a/drivers/gpu/drm/mga/mga_warp.c
+++ b/drivers/gpu/drm/mga/mga_warp.c
@@ -46,7 +46,7 @@ MODULE_FIRMWARE(FIRMWARE_G400);
 
 #define WARP_UCODE_SIZE(size)		ALIGN(size, MGA_WARP_CODE_ALIGN)
 
-int mga_warp_install_microcode(drm_mga_private_t * dev_priv)
+int mga_warp_install_microcode(drm_mga_private_t *dev_priv)
 {
 	unsigned char *vcbase = dev_priv->warp->handle;
 	unsigned long pcbase = dev_priv->warp->offset;
@@ -133,7 +133,7 @@ out:
 
 #define WMISC_EXPECTED		(MGA_WUCODECACHE_ENABLE | MGA_WMASTER_ENABLE)
 
-int mga_warp_init(drm_mga_private_t * dev_priv)
+int mga_warp_init(drm_mga_private_t *dev_priv)
 {
 	u32 wmisc;
 
diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
index 1175429da10..d2d28048efb 100644
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -1,6 +1,6 @@
 config DRM_NOUVEAU
 	tristate "Nouveau (nVidia) cards"
-	depends on DRM
+	depends on DRM && PCI
         select FW_LOADER
 	select DRM_KMS_HELPER
 	select DRM_TTM
@@ -41,4 +41,13 @@ config DRM_I2C_CH7006
 
 	  This driver is currently only useful if you're also using
 	  the nouveau driver.
+
+config DRM_I2C_SIL164
+	tristate "Silicon Image sil164 TMDS transmitter"
+	default m if DRM_NOUVEAU
+	help
+	  Support for sil164 and similar single-link (or dual-link
+	  when used in pairs) TMDS transmitters, used in some nVidia
+	  video cards.
+
 endmenu
diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile
index acd31ed861e..2405d5ef0ca 100644
--- a/drivers/gpu/drm/nouveau/Makefile
+++ b/drivers/gpu/drm/nouveau/Makefile
@@ -9,10 +9,10 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
              nouveau_bo.o nouveau_fence.o nouveau_gem.o nouveau_ttm.o \
              nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \
              nouveau_display.o nouveau_connector.o nouveau_fbcon.o \
-             nouveau_dp.o nouveau_grctx.o \
+             nouveau_dp.o \
              nv04_timer.o \
              nv04_mc.o nv40_mc.o nv50_mc.o \
-             nv04_fb.o nv10_fb.o nv40_fb.o nv50_fb.o \
+             nv04_fb.o nv10_fb.o nv30_fb.o nv40_fb.o nv50_fb.o \
              nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
              nv04_graph.o nv10_graph.o nv20_graph.o \
              nv40_graph.o nv50_graph.o \
@@ -22,7 +22,7 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
              nv50_cursor.o nv50_display.o nv50_fbcon.o \
              nv04_dac.o nv04_dfp.o nv04_tv.o nv17_tv.o nv17_tv_modes.o \
              nv04_crtc.o nv04_display.o nv04_cursor.o nv04_fbcon.o \
-             nv17_gpio.o nv50_gpio.o \
+             nv10_gpio.o nv50_gpio.o \
 	     nv50_calc.o
 
 nouveau-$(CONFIG_DRM_NOUVEAU_DEBUG) += nouveau_debugfs.o
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index d4bcca8a513..c17a055ee3e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -3,6 +3,7 @@
 #include <linux/slab.h>
 #include <acpi/acpi_drivers.h>
 #include <acpi/acpi_bus.h>
+#include <acpi/video.h>
 
 #include "drmP.h"
 #include "drm.h"
@@ -11,6 +12,7 @@
 #include "nouveau_drv.h"
 #include "nouveau_drm.h"
 #include "nv50_display.h"
+#include "nouveau_connector.h"
 
 #include <linux/vga_switcheroo.h>
 
@@ -42,7 +44,7 @@ static const char nouveau_dsm_muid[] = {
 	0xB3, 0x4D, 0x7E, 0x5F, 0xEA, 0x12, 0x9F, 0xD4,
 };
 
-static int nouveau_dsm(acpi_handle handle, int func, int arg, int *result)
+static int nouveau_dsm(acpi_handle handle, int func, int arg, uint32_t *result)
 {
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
 	struct acpi_object_list input;
@@ -259,3 +261,37 @@ int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len)
 {
 	return nouveau_rom_call(nouveau_dsm_priv.rom_handle, bios, offset, len);
 }
+
+int
+nouveau_acpi_edid(struct drm_device *dev, struct drm_connector *connector)
+{
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct acpi_device *acpidev;
+	acpi_handle handle;
+	int type, ret;
+	void *edid;
+
+	switch (connector->connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+	case DRM_MODE_CONNECTOR_eDP:
+		type = ACPI_VIDEO_DISPLAY_LCD;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
+	if (!handle)
+		return -ENODEV;
+
+	ret = acpi_bus_get_device(handle, &acpidev);
+	if (ret)
+		return -ENODEV;
+
+	ret = acpi_video_get_edid(acpidev, type, -1, &edid);
+	if (ret < 0)
+		return ret;
+
+	nv_connector->edid = edid;
+	return 0;
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index e492919faf4..7369b5e7364 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -28,6 +28,8 @@
 #include "nouveau_hw.h"
 #include "nouveau_encoder.h"
 
+#include <linux/io-mapping.h>
+
 /* these defines are made up */
 #define NV_CIO_CRE_44_HEADA 0x0
 #define NV_CIO_CRE_44_HEADB 0x3
@@ -209,20 +211,20 @@ static struct methods shadow_methods[] = {
 	{ "PCIROM", load_vbios_pci, true },
 	{ "ACPI", load_vbios_acpi, true },
 };
+#define NUM_SHADOW_METHODS ARRAY_SIZE(shadow_methods)
 
 static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 {
-	const int nr_methods = ARRAY_SIZE(shadow_methods);
 	struct methods *methods = shadow_methods;
 	int testscore = 3;
-	int scores[nr_methods], i;
+	int scores[NUM_SHADOW_METHODS], i;
 
 	if (nouveau_vbios) {
-		for (i = 0; i < nr_methods; i++)
+		for (i = 0; i < NUM_SHADOW_METHODS; i++)
 			if (!strcasecmp(nouveau_vbios, methods[i].desc))
 				break;
 
-		if (i < nr_methods) {
+		if (i < NUM_SHADOW_METHODS) {
 			NV_INFO(dev, "Attempting to use BIOS image from %s\n",
 				methods[i].desc);
 
@@ -234,7 +236,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 		NV_ERROR(dev, "VBIOS source \'%s\' invalid\n", nouveau_vbios);
 	}
 
-	for (i = 0; i < nr_methods; i++) {
+	for (i = 0; i < NUM_SHADOW_METHODS; i++) {
 		NV_TRACE(dev, "Attempting to load BIOS image from %s\n",
 			 methods[i].desc);
 		data[0] = data[1] = 0;	/* avoid reuse of previous image */
@@ -245,7 +247,7 @@ static bool NVShadowVBIOS(struct drm_device *dev, uint8_t *data)
 	}
 
 	while (--testscore > 0) {
-		for (i = 0; i < nr_methods; i++) {
+		for (i = 0; i < NUM_SHADOW_METHODS; i++) {
 			if (scores[i] == testscore) {
 				NV_TRACE(dev, "Using BIOS image from %s\n",
 					 methods[i].desc);
@@ -920,7 +922,7 @@ init_io_restrict_prog(struct nvbios *bios, uint16_t offset,
 		NV_ERROR(bios->dev,
 			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
 			 offset, config, count);
-		return -EINVAL;
+		return len;
 	}
 
 	configval = ROM32(bios->data[offset + 11 + config * 4]);
@@ -1022,7 +1024,7 @@ init_io_restrict_pll(struct nvbios *bios, uint16_t offset,
 		NV_ERROR(bios->dev,
 			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
 			 offset, config, count);
-		return -EINVAL;
+		return len;
 	}
 
 	freq = ROM16(bios->data[offset + 12 + config * 2]);
@@ -1194,7 +1196,7 @@ init_dp_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	dpe = nouveau_bios_dp_table(dev, dcb, &dummy);
 	if (!dpe) {
 		NV_ERROR(dev, "0x%04X: INIT_3A: no encoder table!!\n", offset);
-		return -EINVAL;
+		return 3;
 	}
 
 	switch (cond) {
@@ -1218,12 +1220,16 @@ init_dp_condition(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		int ret;
 
 		auxch = nouveau_i2c_find(dev, bios->display.output->i2c_index);
-		if (!auxch)
-			return -ENODEV;
+		if (!auxch) {
+			NV_ERROR(dev, "0x%04X: couldn't get auxch\n", offset);
+			return 3;
+		}
 
 		ret = nouveau_dp_auxch(auxch, 9, 0xd, &cond, 1);
-		if (ret)
-			return ret;
+		if (ret) {
+			NV_ERROR(dev, "0x%04X: auxch rd fail: %d\n", offset, ret);
+			return 3;
+		}
 
 		if (cond & 1)
 			iexec->execute = false;
@@ -1392,7 +1398,7 @@ init_io_restrict_pll2(struct nvbios *bios, uint16_t offset,
 		NV_ERROR(bios->dev,
 			 "0x%04X: Config 0x%02X exceeds maximal bound 0x%02X\n",
 			 offset, config, count);
-		return -EINVAL;
+		return len;
 	}
 
 	freq = ROM32(bios->data[offset + 11 + config * 4]);
@@ -1452,6 +1458,7 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 * "mask n" and OR it with "data n" before writing it back to the device
 	 */
 
+	struct drm_device *dev = bios->dev;
 	uint8_t i2c_index = bios->data[offset + 1];
 	uint8_t i2c_address = bios->data[offset + 2] >> 1;
 	uint8_t count = bios->data[offset + 3];
@@ -1466,9 +1473,11 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		      "Count: 0x%02X\n",
 		offset, i2c_index, i2c_address, count);
 
-	chan = init_i2c_device_find(bios->dev, i2c_index);
-	if (!chan)
-		return -ENODEV;
+	chan = init_i2c_device_find(dev, i2c_index);
+	if (!chan) {
+		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+		return len;
+	}
 
 	for (i = 0; i < count; i++) {
 		uint8_t reg = bios->data[offset + 4 + i * 3];
@@ -1479,8 +1488,10 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
 				     I2C_SMBUS_READ, reg,
 				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0)
-			return ret;
+		if (ret < 0) {
+			NV_ERROR(dev, "0x%04X: i2c rd fail: %d\n", offset, ret);
+			return len;
+		}
 
 		BIOSLOG(bios, "0x%04X: I2CReg: 0x%02X, Value: 0x%02X, "
 			      "Mask: 0x%02X, Data: 0x%02X\n",
@@ -1494,8 +1505,10 @@ init_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
 				     I2C_SMBUS_WRITE, reg,
 				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0)
-			return ret;
+		if (ret < 0) {
+			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+			return len;
+		}
 	}
 
 	return len;
@@ -1520,6 +1533,7 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 * "DCB I2C table entry index", set the register to "data n"
 	 */
 
+	struct drm_device *dev = bios->dev;
 	uint8_t i2c_index = bios->data[offset + 1];
 	uint8_t i2c_address = bios->data[offset + 2] >> 1;
 	uint8_t count = bios->data[offset + 3];
@@ -1534,9 +1548,11 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		      "Count: 0x%02X\n",
 		offset, i2c_index, i2c_address, count);
 
-	chan = init_i2c_device_find(bios->dev, i2c_index);
-	if (!chan)
-		return -ENODEV;
+	chan = init_i2c_device_find(dev, i2c_index);
+	if (!chan) {
+		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+		return len;
+	}
 
 	for (i = 0; i < count; i++) {
 		uint8_t reg = bios->data[offset + 4 + i * 2];
@@ -1553,8 +1569,10 @@ init_zm_i2c_byte(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = i2c_smbus_xfer(&chan->adapter, i2c_address, 0,
 				     I2C_SMBUS_WRITE, reg,
 				     I2C_SMBUS_BYTE_DATA, &val);
-		if (ret < 0)
-			return ret;
+		if (ret < 0) {
+			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+			return len;
+		}
 	}
 
 	return len;
@@ -1577,6 +1595,7 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 * address" on the I2C bus given by "DCB I2C table entry index"
 	 */
 
+	struct drm_device *dev = bios->dev;
 	uint8_t i2c_index = bios->data[offset + 1];
 	uint8_t i2c_address = bios->data[offset + 2] >> 1;
 	uint8_t count = bios->data[offset + 3];
@@ -1584,7 +1603,7 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	struct nouveau_i2c_chan *chan;
 	struct i2c_msg msg;
 	uint8_t data[256];
-	int i;
+	int ret, i;
 
 	if (!iexec->execute)
 		return len;
@@ -1593,9 +1612,11 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		      "Count: 0x%02X\n",
 		offset, i2c_index, i2c_address, count);
 
-	chan = init_i2c_device_find(bios->dev, i2c_index);
-	if (!chan)
-		return -ENODEV;
+	chan = init_i2c_device_find(dev, i2c_index);
+	if (!chan) {
+		NV_ERROR(dev, "0x%04X: i2c bus not found\n", offset);
+		return len;
+	}
 
 	for (i = 0; i < count; i++) {
 		data[i] = bios->data[offset + 4 + i];
@@ -1608,8 +1629,11 @@ init_zm_i2c(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		msg.flags = 0;
 		msg.len = count;
 		msg.buf = data;
-		if (i2c_transfer(&chan->adapter, &msg, 1) != 1)
-			return -EIO;
+		ret = i2c_transfer(&chan->adapter, &msg, 1);
+		if (ret != 1) {
+			NV_ERROR(dev, "0x%04X: i2c wr fail: %d\n", offset, ret);
+			return len;
+		}
 	}
 
 	return len;
@@ -1633,6 +1657,7 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 * used -- see get_tmds_index_reg()
 	 */
 
+	struct drm_device *dev = bios->dev;
 	uint8_t mlv = bios->data[offset + 1];
 	uint32_t tmdsaddr = bios->data[offset + 2];
 	uint8_t mask = bios->data[offset + 3];
@@ -1647,8 +1672,10 @@ init_tmds(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		offset, mlv, tmdsaddr, mask, data);
 
 	reg = get_tmds_index_reg(bios->dev, mlv);
-	if (!reg)
-		return -EINVAL;
+	if (!reg) {
+		NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
+		return 5;
+	}
 
 	bios_wr32(bios, reg,
 		  tmdsaddr | NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE);
@@ -1678,6 +1705,7 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset,
 	 * register is used -- see get_tmds_index_reg()
 	 */
 
+	struct drm_device *dev = bios->dev;
 	uint8_t mlv = bios->data[offset + 1];
 	uint8_t count = bios->data[offset + 2];
 	int len = 3 + count * 2;
@@ -1691,8 +1719,10 @@ init_zm_tmds_group(struct nvbios *bios, uint16_t offset,
 		offset, mlv, count);
 
 	reg = get_tmds_index_reg(bios->dev, mlv);
-	if (!reg)
-		return -EINVAL;
+	if (!reg) {
+		NV_ERROR(dev, "0x%04X: no tmds_index_reg\n", offset);
+		return len;
+	}
 
 	for (i = 0; i < count; i++) {
 		uint8_t tmdsaddr = bios->data[offset + 3 + i * 2];
@@ -2039,6 +2069,323 @@ init_zm_index_io(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	return 5;
 }
 
+static inline void
+bios_md32(struct nvbios *bios, uint32_t reg,
+	  uint32_t mask, uint32_t val)
+{
+	bios_wr32(bios, reg, (bios_rd32(bios, reg) & ~mask) | val);
+}
+
+static uint32_t
+peek_fb(struct drm_device *dev, struct io_mapping *fb,
+	uint32_t off)
+{
+	uint32_t val = 0;
+
+	if (off < pci_resource_len(dev->pdev, 1)) {
+		uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off, KM_USER0);
+
+		val = ioread32(p);
+
+		io_mapping_unmap_atomic(p, KM_USER0);
+	}
+
+	return val;
+}
+
+static void
+poke_fb(struct drm_device *dev, struct io_mapping *fb,
+	uint32_t off, uint32_t val)
+{
+	if (off < pci_resource_len(dev->pdev, 1)) {
+		uint32_t __iomem *p = io_mapping_map_atomic_wc(fb, off, KM_USER0);
+
+		iowrite32(val, p);
+		wmb();
+
+		io_mapping_unmap_atomic(p, KM_USER0);
+	}
+}
+
+static inline bool
+read_back_fb(struct drm_device *dev, struct io_mapping *fb,
+	     uint32_t off, uint32_t val)
+{
+	poke_fb(dev, fb, off, val);
+	return val == peek_fb(dev, fb, off);
+}
+
+static int
+nv04_init_compute_mem(struct nvbios *bios)
+{
+	struct drm_device *dev = bios->dev;
+	uint32_t patt = 0xdeadbeef;
+	struct io_mapping *fb;
+	int i;
+
+	/* Map the framebuffer aperture */
+	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+				  pci_resource_len(dev->pdev, 1));
+	if (!fb)
+		return -ENOMEM;
+
+	/* Sequencer and refresh off */
+	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
+	bios_md32(bios, NV04_PFB_DEBUG_0, 0, NV04_PFB_DEBUG_0_REFRESH_OFF);
+
+	bios_md32(bios, NV04_PFB_BOOT_0, ~0,
+		  NV04_PFB_BOOT_0_RAM_AMOUNT_16MB |
+		  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+		  NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT);
+
+	for (i = 0; i < 4; i++)
+		poke_fb(dev, fb, 4 * i, patt);
+
+	poke_fb(dev, fb, 0x400000, patt + 1);
+
+	if (peek_fb(dev, fb, 0) == patt + 1) {
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
+			  NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_16MBIT);
+		bios_md32(bios, NV04_PFB_DEBUG_0,
+			  NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+
+		for (i = 0; i < 4; i++)
+			poke_fb(dev, fb, 4 * i, patt);
+
+		if ((peek_fb(dev, fb, 0xc) & 0xffff) != (patt & 0xffff))
+			bios_md32(bios, NV04_PFB_BOOT_0,
+				  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+				  NV04_PFB_BOOT_0_RAM_AMOUNT,
+				  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+	} else if ((peek_fb(dev, fb, 0xc) & 0xffff0000) !=
+		   (patt & 0xffff0000)) {
+		bios_md32(bios, NV04_PFB_BOOT_0,
+			  NV04_PFB_BOOT_0_RAM_WIDTH_128 |
+			  NV04_PFB_BOOT_0_RAM_AMOUNT,
+			  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+	} else if (peek_fb(dev, fb, 0) == patt) {
+		if (read_back_fb(dev, fb, 0x800000, patt))
+			bios_md32(bios, NV04_PFB_BOOT_0,
+				  NV04_PFB_BOOT_0_RAM_AMOUNT,
+				  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+		else
+			bios_md32(bios, NV04_PFB_BOOT_0,
+				  NV04_PFB_BOOT_0_RAM_AMOUNT,
+				  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_TYPE,
+			  NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_8MBIT);
+
+	} else if (!read_back_fb(dev, fb, 0x800000, patt)) {
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+			  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+	}
+
+	/* Refresh on, sequencer on */
+	bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
+
+	io_mapping_free(fb);
+	return 0;
+}
+
+static const uint8_t *
+nv05_memory_config(struct nvbios *bios)
+{
+	/* Defaults for BIOSes lacking a memory config table */
+	static const uint8_t default_config_tab[][2] = {
+		{ 0x24, 0x00 },
+		{ 0x28, 0x00 },
+		{ 0x24, 0x01 },
+		{ 0x1f, 0x00 },
+		{ 0x0f, 0x00 },
+		{ 0x17, 0x00 },
+		{ 0x06, 0x00 },
+		{ 0x00, 0x00 }
+	};
+	int i = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) &
+		 NV_PEXTDEV_BOOT_0_RAMCFG) >> 2;
+
+	if (bios->legacy.mem_init_tbl_ptr)
+		return &bios->data[bios->legacy.mem_init_tbl_ptr + 2 * i];
+	else
+		return default_config_tab[i];
+}
+
+static int
+nv05_init_compute_mem(struct nvbios *bios)
+{
+	struct drm_device *dev = bios->dev;
+	const uint8_t *ramcfg = nv05_memory_config(bios);
+	uint32_t patt = 0xdeadbeef;
+	struct io_mapping *fb;
+	int i, v;
+
+	/* Map the framebuffer aperture */
+	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+				  pci_resource_len(dev->pdev, 1));
+	if (!fb)
+		return -ENOMEM;
+
+	/* Sequencer off */
+	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) | 0x20);
+
+	if (bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_UMA_ENABLE)
+		goto out;
+
+	bios_md32(bios, NV04_PFB_DEBUG_0, NV04_PFB_DEBUG_0_REFRESH_OFF, 0);
+
+	/* If present load the hardcoded scrambling table */
+	if (bios->legacy.mem_init_tbl_ptr) {
+		uint32_t *scramble_tab = (uint32_t *)&bios->data[
+			bios->legacy.mem_init_tbl_ptr + 0x10];
+
+		for (i = 0; i < 8; i++)
+			bios_wr32(bios, NV04_PFB_SCRAMBLE(i),
+				  ROM32(scramble_tab[i]));
+	}
+
+	/* Set memory type/width/length defaults depending on the straps */
+	bios_md32(bios, NV04_PFB_BOOT_0, 0x3f, ramcfg[0]);
+
+	if (ramcfg[1] & 0x80)
+		bios_md32(bios, NV04_PFB_CFG0, 0, NV04_PFB_CFG0_SCRAMBLE);
+
+	bios_md32(bios, NV04_PFB_CFG1, 0x700001, (ramcfg[1] & 1) << 20);
+	bios_md32(bios, NV04_PFB_CFG1, 0, 1);
+
+	/* Probe memory bus width */
+	for (i = 0; i < 4; i++)
+		poke_fb(dev, fb, 4 * i, patt);
+
+	if (peek_fb(dev, fb, 0xc) != patt)
+		bios_md32(bios, NV04_PFB_BOOT_0,
+			  NV04_PFB_BOOT_0_RAM_WIDTH_128, 0);
+
+	/* Probe memory length */
+	v = bios_rd32(bios, NV04_PFB_BOOT_0) & NV04_PFB_BOOT_0_RAM_AMOUNT;
+
+	if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_32MB &&
+	    (!read_back_fb(dev, fb, 0x1000000, ++patt) ||
+	     !read_back_fb(dev, fb, 0, ++patt)))
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+			  NV04_PFB_BOOT_0_RAM_AMOUNT_16MB);
+
+	if (v == NV04_PFB_BOOT_0_RAM_AMOUNT_16MB &&
+	    !read_back_fb(dev, fb, 0x800000, ++patt))
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+			  NV04_PFB_BOOT_0_RAM_AMOUNT_8MB);
+
+	if (!read_back_fb(dev, fb, 0x400000, ++patt))
+		bios_md32(bios, NV04_PFB_BOOT_0, NV04_PFB_BOOT_0_RAM_AMOUNT,
+			  NV04_PFB_BOOT_0_RAM_AMOUNT_4MB);
+
+out:
+	/* Sequencer on */
+	NVWriteVgaSeq(dev, 0, 1, NVReadVgaSeq(dev, 0, 1) & ~0x20);
+
+	io_mapping_free(fb);
+	return 0;
+}
+
+static int
+nv10_init_compute_mem(struct nvbios *bios)
+{
+	struct drm_device *dev = bios->dev;
+	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+	const int mem_width[] = { 0x10, 0x00, 0x20 };
+	const int mem_width_count = (dev_priv->chipset >= 0x17 ? 3 : 2);
+	uint32_t patt = 0xdeadbeef;
+	struct io_mapping *fb;
+	int i, j, k;
+
+	/* Map the framebuffer aperture */
+	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+				  pci_resource_len(dev->pdev, 1));
+	if (!fb)
+		return -ENOMEM;
+
+	bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
+
+	/* Probe memory bus width */
+	for (i = 0; i < mem_width_count; i++) {
+		bios_md32(bios, NV04_PFB_CFG0, 0x30, mem_width[i]);
+
+		for (j = 0; j < 4; j++) {
+			for (k = 0; k < 4; k++)
+				poke_fb(dev, fb, 0x1c, 0);
+
+			poke_fb(dev, fb, 0x1c, patt);
+			poke_fb(dev, fb, 0x3c, 0);
+
+			if (peek_fb(dev, fb, 0x1c) == patt)
+				goto mem_width_found;
+		}
+	}
+
+mem_width_found:
+	patt <<= 1;
+
+	/* Probe amount of installed memory */
+	for (i = 0; i < 4; i++) {
+		int off = bios_rd32(bios, NV04_PFB_FIFO_DATA) - 0x100000;
+
+		poke_fb(dev, fb, off, patt);
+		poke_fb(dev, fb, 0, 0);
+
+		peek_fb(dev, fb, 0);
+		peek_fb(dev, fb, 0);
+		peek_fb(dev, fb, 0);
+		peek_fb(dev, fb, 0);
+
+		if (peek_fb(dev, fb, off) == patt)
+			goto amount_found;
+	}
+
+	/* IC missing - disable the upper half memory space. */
+	bios_md32(bios, NV04_PFB_CFG0, 0x1000, 0);
+
+amount_found:
+	io_mapping_free(fb);
+	return 0;
+}
+
+static int
+nv20_init_compute_mem(struct nvbios *bios)
+{
+	struct drm_device *dev = bios->dev;
+	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+	uint32_t mask = (dev_priv->chipset >= 0x25 ? 0x300 : 0x900);
+	uint32_t amount, off;
+	struct io_mapping *fb;
+
+	/* Map the framebuffer aperture */
+	fb = io_mapping_create_wc(pci_resource_start(dev->pdev, 1),
+				  pci_resource_len(dev->pdev, 1));
+	if (!fb)
+		return -ENOMEM;
+
+	bios_wr32(bios, NV10_PFB_REFCTRL, NV10_PFB_REFCTRL_VALID_1);
+
+	/* Allow full addressing */
+	bios_md32(bios, NV04_PFB_CFG0, 0, mask);
+
+	amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
+	for (off = amount; off > 0x2000000; off -= 0x2000000)
+		poke_fb(dev, fb, off - 4, off);
+
+	amount = bios_rd32(bios, NV04_PFB_FIFO_DATA);
+	if (amount != peek_fb(dev, fb, amount - 4))
+		/* IC missing - disable the upper half memory space. */
+		bios_md32(bios, NV04_PFB_CFG0, mask, 0);
+
+	io_mapping_free(fb);
+	return 0;
+}
+
 static int
 init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 {
@@ -2047,64 +2394,57 @@ init_compute_mem(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 *
 	 * offset      (8 bit): opcode
 	 *
-	 * This opcode is meant to set NV_PFB_CFG0 (0x100200) appropriately so
-	 * that the hardware can correctly calculate how much VRAM it has
-	 * (and subsequently report that value in NV_PFB_CSTATUS (0x10020C))
+	 * This opcode is meant to set the PFB memory config registers
+	 * appropriately so that we can correctly calculate how much VRAM it
+	 * has (on nv10 and better chipsets the amount of installed VRAM is
+	 * subsequently reported in NV_PFB_CSTATUS (0x10020C)).
 	 *
-	 * The implementation of this opcode in general consists of two parts:
-	 * 1) determination of the memory bus width
-	 * 2) determination of how many of the card's RAM pads have ICs attached
+	 * The implementation of this opcode in general consists of several
+	 * parts:
 	 *
-	 * 1) is done by a cunning combination of writes to offsets 0x1c and
-	 * 0x3c in the framebuffer, and seeing whether the written values are
-	 * read back correctly. This then affects bits 4-7 of NV_PFB_CFG0
+	 * 1) Determination of memory type and density. Only necessary for
+	 *    really old chipsets, the memory type reported by the strap bits
+	 *    (0x101000) is assumed to be accurate on nv05 and newer.
 	 *
-	 * 2) is done by a cunning combination of writes to an offset slightly
-	 * less than the maximum memory reported by NV_PFB_CSTATUS, then seeing
-	 * if the test pattern can be read back. This then affects bits 12-15 of
-	 * NV_PFB_CFG0
+	 * 2) Determination of the memory bus width. Usually done by a cunning
+	 *    combination of writes to offsets 0x1c and 0x3c in the fb, and
+	 *    seeing whether the written values are read back correctly.
 	 *
-	 * In this context a "cunning combination" may include multiple reads
-	 * and writes to varying locations, often alternating the test pattern
-	 * and 0, doubtless to make sure buffers are filled, residual charges
-	 * on tracks are removed etc.
+	 *    Only necessary on nv0x-nv1x and nv34, on the other cards we can
+	 *    trust the straps.
 	 *
-	 * Unfortunately, the "cunning combination"s mentioned above, and the
-	 * changes to the bits in NV_PFB_CFG0 differ with nearly every bios
-	 * trace I have.
+	 * 3) Determination of how many of the card's RAM pads have ICs
+	 *    attached, usually done by a cunning combination of writes to an
+	 *    offset slightly less than the maximum memory reported by
+	 *    NV_PFB_CSTATUS, then seeing if the test pattern can be read back.
 	 *
-	 * Therefore, we cheat and assume the value of NV_PFB_CFG0 with which
-	 * we started was correct, and use that instead
+	 * This appears to be a NOP on IGPs and NV4x or newer chipsets, both io
+	 * logs of the VBIOS and kmmio traces of the binary driver POSTing the
+	 * card show nothing being done for this opcode. Why is it still listed
+	 * in the table?!
 	 */
 
 	/* no iexec->execute check by design */
 
-	/*
-	 * This appears to be a NOP on G8x chipsets, both io logs of the VBIOS
-	 * and kmmio traces of the binary driver POSTing the card show nothing
-	 * being done for this opcode.  why is it still listed in the table?!
-	 */
-
 	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+	int ret;
 
-	if (dev_priv->card_type >= NV_40)
-		return 1;
-
-	/*
-	 * On every card I've seen, this step gets done for us earlier in
-	 * the init scripts
-	uint8_t crdata = bios_idxprt_rd(dev, NV_VIO_SRX, 0x01);
-	bios_idxprt_wr(dev, NV_VIO_SRX, 0x01, crdata | 0x20);
-	 */
-
-	/*
-	 * This also has probably been done in the scripts, but an mmio trace of
-	 * s3 resume shows nvidia doing it anyway (unlike the NV_VIO_SRX write)
-	 */
-	bios_wr32(bios, NV_PFB_REFCTRL, NV_PFB_REFCTRL_VALID_1);
+	if (dev_priv->chipset >= 0x40 ||
+	    dev_priv->chipset == 0x1a ||
+	    dev_priv->chipset == 0x1f)
+		ret = 0;
+	else if (dev_priv->chipset >= 0x20 &&
+		 dev_priv->chipset != 0x34)
+		ret = nv20_init_compute_mem(bios);
+	else if (dev_priv->chipset >= 0x10)
+		ret = nv10_init_compute_mem(bios);
+	else if (dev_priv->chipset >= 0x5)
+		ret = nv05_init_compute_mem(bios);
+	else
+		ret = nv04_init_compute_mem(bios);
 
-	/* write back the saved configuration value */
-	bios_wr32(bios, NV_PFB_CFG0, bios->state.saved_nv_pfb_cfg0);
+	if (ret)
+		return ret;
 
 	return 1;
 }
@@ -2131,7 +2471,8 @@ init_reset(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	/* no iexec->execute check by design */
 
 	pci_nv_19 = bios_rd32(bios, NV_PBUS_PCI_NV_19);
-	bios_wr32(bios, NV_PBUS_PCI_NV_19, 0);
+	bios_wr32(bios, NV_PBUS_PCI_NV_19, pci_nv_19 & ~0xf00);
+
 	bios_wr32(bios, reg, value1);
 
 	udelay(10);
@@ -2167,7 +2508,7 @@ init_configure_mem(struct nvbios *bios, uint16_t offset,
 	uint32_t reg, data;
 
 	if (bios->major_version > 2)
-		return -ENODEV;
+		return 0;
 
 	bios_idxprt_wr(bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX, bios_idxprt_rd(
 		       bios, NV_VIO_SRX, NV_VIO_SR_CLOCK_INDEX) | 0x20);
@@ -2180,14 +2521,14 @@ init_configure_mem(struct nvbios *bios, uint16_t offset,
 	     reg = ROM32(bios->data[seqtbloffs += 4])) {
 
 		switch (reg) {
-		case NV_PFB_PRE:
-			data = NV_PFB_PRE_CMD_PRECHARGE;
+		case NV04_PFB_PRE:
+			data = NV04_PFB_PRE_CMD_PRECHARGE;
 			break;
-		case NV_PFB_PAD:
-			data = NV_PFB_PAD_CKE_NORMAL;
+		case NV04_PFB_PAD:
+			data = NV04_PFB_PAD_CKE_NORMAL;
 			break;
-		case NV_PFB_REF:
-			data = NV_PFB_REF_CMD_REFRESH;
+		case NV04_PFB_REF:
+			data = NV04_PFB_REF_CMD_REFRESH;
 			break;
 		default:
 			data = ROM32(bios->data[meminitdata]);
@@ -2222,7 +2563,7 @@ init_configure_clk(struct nvbios *bios, uint16_t offset,
 	int clock;
 
 	if (bios->major_version > 2)
-		return -ENODEV;
+		return 0;
 
 	clock = ROM16(bios->data[meminitoffs + 4]) * 10;
 	setPLL(bios, NV_PRAMDAC_NVPLL_COEFF, clock);
@@ -2255,7 +2596,7 @@ init_configure_preinit(struct nvbios *bios, uint16_t offset,
 	uint8_t cr3c = ((straps << 2) & 0xf0) | (straps & (1 << 6));
 
 	if (bios->major_version > 2)
-		return -ENODEV;
+		return 0;
 
 	bios_idxprt_wr(bios, NV_CIO_CRX__COLOR,
 			     NV_CIO_CRE_SCRATCH4__INDEX, cr3c);
@@ -2389,7 +2730,7 @@ init_ram_condition(struct nvbios *bios, uint16_t offset,
 	 * offset + 1  (8 bit): mask
 	 * offset + 2  (8 bit): cmpval
 	 *
-	 * Test if (NV_PFB_BOOT_0 & "mask") equals "cmpval".
+	 * Test if (NV04_PFB_BOOT_0 & "mask") equals "cmpval".
 	 * If condition not met skip subsequent opcodes until condition is
 	 * inverted (INIT_NOT), or we hit INIT_RESUME
 	 */
@@ -2401,7 +2742,7 @@ init_ram_condition(struct nvbios *bios, uint16_t offset,
 	if (!iexec->execute)
 		return 3;
 
-	data = bios_rd32(bios, NV_PFB_BOOT_0) & mask;
+	data = bios_rd32(bios, NV04_PFB_BOOT_0) & mask;
 
 	BIOSLOG(bios, "0x%04X: Checking if 0x%08X equals 0x%08X\n",
 		offset, data, cmpval);
@@ -2795,12 +3136,13 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 */
 
 	struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
+	struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
 	const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
 	int i;
 
 	if (dev_priv->card_type != NV_50) {
 		NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
-		return -ENODEV;
+		return 1;
 	}
 
 	if (!iexec->execute)
@@ -2815,7 +3157,7 @@ init_gpio(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		BIOSLOG(bios, "0x%04X: set gpio 0x%02x, state %d\n",
 			offset, gpio->tag, gpio->state_default);
 		if (bios->execute)
-			nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
+			pgpio->set(bios->dev, gpio->tag, gpio->state_default);
 
 		/* The NVIDIA binary driver doesn't appear to actually do
 		 * any of this, my VBIOS does however.
@@ -2872,10 +3214,7 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset,
 	uint8_t index;
 	int i;
 
-
-	if (!iexec->execute)
-		return len;
-
+	/* critical! to know the length of the opcode */;
 	if (!blocklen) {
 		NV_ERROR(bios->dev,
 			 "0x%04X: Zero block length - has the M table "
@@ -2883,6 +3222,9 @@ init_ram_restrict_zm_reg_group(struct nvbios *bios, uint16_t offset,
 		return -EINVAL;
 	}
 
+	if (!iexec->execute)
+		return len;
+
 	strap_ramcfg = (bios_rd32(bios, NV_PEXTDEV_BOOT_0) >> 2) & 0xf;
 	index = bios->data[bios->ram_restrict_tbl_ptr + strap_ramcfg];
 
@@ -3064,14 +3406,14 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 
 	if (!bios->display.output) {
 		NV_ERROR(dev, "INIT_AUXCH: no active output\n");
-		return -EINVAL;
+		return len;
 	}
 
 	auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
 	if (!auxch) {
 		NV_ERROR(dev, "INIT_AUXCH: couldn't get auxch %d\n",
 			 bios->display.output->i2c_index);
-		return -ENODEV;
+		return len;
 	}
 
 	if (!iexec->execute)
@@ -3084,7 +3426,7 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = nouveau_dp_auxch(auxch, 9, addr, &data, 1);
 		if (ret) {
 			NV_ERROR(dev, "INIT_AUXCH: rd auxch fail %d\n", ret);
-			return ret;
+			return len;
 		}
 
 		data &= bios->data[offset + 0];
@@ -3093,7 +3435,7 @@ init_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = nouveau_dp_auxch(auxch, 8, addr, &data, 1);
 		if (ret) {
 			NV_ERROR(dev, "INIT_AUXCH: wr auxch fail %d\n", ret);
-			return ret;
+			return len;
 		}
 	}
 
@@ -3123,14 +3465,14 @@ init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 
 	if (!bios->display.output) {
 		NV_ERROR(dev, "INIT_ZM_AUXCH: no active output\n");
-		return -EINVAL;
+		return len;
 	}
 
 	auxch = init_i2c_device_find(dev, bios->display.output->i2c_index);
 	if (!auxch) {
 		NV_ERROR(dev, "INIT_ZM_AUXCH: couldn't get auxch %d\n",
 			 bios->display.output->i2c_index);
-		return -ENODEV;
+		return len;
 	}
 
 	if (!iexec->execute)
@@ -3141,7 +3483,7 @@ init_zm_auxch(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 		ret = nouveau_dp_auxch(auxch, 8, addr, &bios->data[offset], 1);
 		if (ret) {
 			NV_ERROR(dev, "INIT_ZM_AUXCH: wr auxch fail %d\n", ret);
-			return ret;
+			return len;
 		}
 	}
 
@@ -5151,10 +5493,14 @@ static int parse_bmp_structure(struct drm_device *dev, struct nvbios *bios, unsi
 	bios->legacy.i2c_indices.crt = bios->data[legacy_i2c_offset];
 	bios->legacy.i2c_indices.tv = bios->data[legacy_i2c_offset + 1];
 	bios->legacy.i2c_indices.panel = bios->data[legacy_i2c_offset + 2];
-	bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
-	bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
-	bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
-	bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
+	if (bios->data[legacy_i2c_offset + 4])
+		bios->dcb.i2c[0].write = bios->data[legacy_i2c_offset + 4];
+	if (bios->data[legacy_i2c_offset + 5])
+		bios->dcb.i2c[0].read = bios->data[legacy_i2c_offset + 5];
+	if (bios->data[legacy_i2c_offset + 6])
+		bios->dcb.i2c[1].write = bios->data[legacy_i2c_offset + 6];
+	if (bios->data[legacy_i2c_offset + 7])
+		bios->dcb.i2c[1].read = bios->data[legacy_i2c_offset + 7];
 
 	if (bmplength > 74) {
 		bios->fmaxvco = ROM32(bmp[67]);
@@ -5589,9 +5935,12 @@ parse_dcb20_entry(struct drm_device *dev, struct dcb_table *dcb,
 			if (conf & 0x4 || conf & 0x8)
 				entry->lvdsconf.use_power_scripts = true;
 		} else {
-			mask = ~0x5;
+			mask = ~0x7;
+			if (conf & 0x2)
+				entry->lvdsconf.use_acpi_for_edid = true;
 			if (conf & 0x4)
 				entry->lvdsconf.use_power_scripts = true;
+			entry->lvdsconf.sor.link = (conf & 0x00000030) >> 4;
 		}
 		if (conf & mask) {
 			/*
@@ -5706,13 +6055,6 @@ parse_dcb15_entry(struct drm_device *dev, struct dcb_table *dcb,
 	case OUTPUT_TV:
 		entry->tvconf.has_component_output = false;
 		break;
-	case OUTPUT_TMDS:
-		/*
-		 * Invent a DVI-A output, by copying the fields of the DVI-D
-		 * output; reported to work by math_b on an NV20(!).
-		 */
-		fabricate_vga_output(dcb, entry->i2c_index, entry->heads);
-		break;
 	case OUTPUT_LVDS:
 		if ((conn & 0x00003f00) != 0x10)
 			entry->lvdsconf.use_straps_for_mode = true;
@@ -5793,6 +6135,31 @@ void merge_like_dcb_entries(struct drm_device *dev, struct dcb_table *dcb)
 	dcb->entries = newentries;
 }
 
+static bool
+apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
+{
+	/* Dell Precision M6300
+	 *   DCB entry 2: 02025312 00000010
+	 *   DCB entry 3: 02026312 00000020
+	 *
+	 * Identical, except apparently a different connector on a
+	 * different SOR link.  Not a clue how we're supposed to know
+	 * which one is in use if it even shares an i2c line...
+	 *
+	 * Ignore the connector on the second SOR link to prevent
+	 * nasty problems until this is sorted (assuming it's not a
+	 * VBIOS bug).
+	 */
+	if ((dev->pdev->device == 0x040d) &&
+	    (dev->pdev->subsystem_vendor == 0x1028) &&
+	    (dev->pdev->subsystem_device == 0x019b)) {
+		if (*conn == 0x02026312 && *conf == 0x00000020)
+			return false;
+	}
+
+	return true;
+}
+
 static int
 parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
 {
@@ -5926,6 +6293,9 @@ parse_dcb_table(struct drm_device *dev, struct nvbios *bios, bool twoHeads)
 		if ((connection & 0x0000000f) == 0x0000000f)
 			continue;
 
+		if (!apply_dcb_encoder_quirks(dev, i, &connection, &config))
+			continue;
+
 		NV_TRACEWARN(dev, "Raw DCB entry %d: %08x %08x\n",
 			     dcb->entries, connection, config);
 
@@ -6181,9 +6551,8 @@ nouveau_run_vbios_init(struct drm_device *dev)
 	struct nvbios *bios = &dev_priv->vbios;
 	int i, ret = 0;
 
-	NVLockVgaCrtcs(dev, false);
-	if (nv_two_heads(dev))
-		NVSetOwner(dev, bios->state.crtchead);
+	/* Reset the BIOS head to 0. */
+	bios->state.crtchead = 0;
 
 	if (bios->major_version < 5)	/* BMP only */
 		load_nv17_hw_sequencer_ucode(dev, bios);
@@ -6216,8 +6585,6 @@ nouveau_run_vbios_init(struct drm_device *dev)
 		}
 	}
 
-	NVLockVgaCrtcs(dev, true);
-
 	return ret;
 }
 
@@ -6238,7 +6605,6 @@ static bool
 nouveau_bios_posted(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	bool was_locked;
 	unsigned htotal;
 
 	if (dev_priv->chipset >= NV_50) {
@@ -6248,13 +6614,12 @@ nouveau_bios_posted(struct drm_device *dev)
 		return true;
 	}
 
-	was_locked = NVLockVgaCrtcs(dev, false);
 	htotal  = NVReadVgaCrtc(dev, 0, 0x06);
 	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x01) << 8;
 	htotal |= (NVReadVgaCrtc(dev, 0, 0x07) & 0x20) << 4;
 	htotal |= (NVReadVgaCrtc(dev, 0, 0x25) & 0x01) << 10;
 	htotal |= (NVReadVgaCrtc(dev, 0, 0x41) & 0x01) << 11;
-	NVLockVgaCrtcs(dev, was_locked);
+
 	return (htotal != 0);
 }
 
@@ -6263,8 +6628,6 @@ nouveau_bios_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nvbios *bios = &dev_priv->vbios;
-	uint32_t saved_nv_pextdev_boot_0;
-	bool was_locked;
 	int ret;
 
 	if (!NVInitVBIOS(dev))
@@ -6284,40 +6647,27 @@ nouveau_bios_init(struct drm_device *dev)
 	if (!bios->major_version)	/* we don't run version 0 bios */
 		return 0;
 
-	/* these will need remembering across a suspend */
-	saved_nv_pextdev_boot_0 = bios_rd32(bios, NV_PEXTDEV_BOOT_0);
-	bios->state.saved_nv_pfb_cfg0 = bios_rd32(bios, NV_PFB_CFG0);
-
 	/* init script execution disabled */
 	bios->execute = false;
 
 	/* ... unless card isn't POSTed already */
 	if (!nouveau_bios_posted(dev)) {
-		NV_INFO(dev, "Adaptor not initialised\n");
-		if (dev_priv->card_type < NV_40) {
-			NV_ERROR(dev, "Unable to POST this chipset\n");
-			return -ENODEV;
-		}
-
-		NV_INFO(dev, "Running VBIOS init tables\n");
+		NV_INFO(dev, "Adaptor not initialised, "
+			"running VBIOS init tables.\n");
 		bios->execute = true;
 	}
 
-	bios_wr32(bios, NV_PEXTDEV_BOOT_0, saved_nv_pextdev_boot_0);
-
 	ret = nouveau_run_vbios_init(dev);
 	if (ret)
 		return ret;
 
 	/* feature_byte on BMP is poor, but init always sets CR4B */
-	was_locked = NVLockVgaCrtcs(dev, false);
 	if (bios->major_version < 5)
 		bios->is_mobile = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_4B) & 0x40;
 
 	/* all BIT systems need p_f_m_t for digital_min_front_porch */
 	if (bios->is_mobile || bios->major_version >= 5)
 		ret = parse_fp_mode_table(dev, bios);
-	NVLockVgaCrtcs(dev, was_locked);
 
 	/* allow subsequent scripts to execute */
 	bios->execute = true;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.h b/drivers/gpu/drm/nouveau/nouveau_bios.h
index adf4ec2d06c..024458a8d06 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.h
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.h
@@ -81,6 +81,7 @@ struct dcb_connector_table_entry {
 	enum dcb_connector_type type;
 	uint8_t index2;
 	uint8_t gpio_tag;
+	void *drm;
 };
 
 struct dcb_connector_table {
@@ -117,6 +118,7 @@ struct dcb_entry {
 		struct {
 			struct sor_conf sor;
 			bool use_straps_for_mode;
+			bool use_acpi_for_edid;
 			bool use_power_scripts;
 		} lvdsconf;
 		struct {
@@ -249,8 +251,6 @@ struct nvbios {
 
 	struct {
 		int crtchead;
-		/* these need remembering across suspend */
-		uint32_t saved_nv_pfb_cfg0;
 	} state;
 
 	struct {
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 6f3c1952237..3ca8343c15d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -461,9 +461,9 @@ nouveau_bo_move_accel_cleanup(struct nouveau_channel *chan,
 		return ret;
 
 	ret = ttm_bo_move_accel_cleanup(&nvbo->bo, fence, NULL,
-					evict, no_wait_reserve, no_wait_gpu, new_mem);
-	if (nvbo->channel && nvbo->channel != chan)
-		ret = nouveau_fence_wait(fence, NULL, false, false);
+					evict || (nvbo->channel &&
+						  nvbo->channel != chan),
+					no_wait_reserve, no_wait_gpu, new_mem);
 	nouveau_fence_unref((void *)&fence);
 	return ret;
 }
@@ -711,8 +711,7 @@ nouveau_bo_move(struct ttm_buffer_object *bo, bool evict, bool intr,
 		return ret;
 
 	/* Software copy if the card isn't up and running yet. */
-	if (dev_priv->init_state != NOUVEAU_CARD_INIT_DONE ||
-	    !dev_priv->channel) {
+	if (!dev_priv->channel) {
 		ret = ttm_bo_move_memcpy(bo, evict, no_wait_reserve, no_wait_gpu, new_mem);
 		goto out;
 	}
@@ -783,7 +782,7 @@ nouveau_ttm_io_mem_reserve(struct ttm_bo_device *bdev, struct ttm_mem_reg *mem)
 		break;
 	case TTM_PL_VRAM:
 		mem->bus.offset = mem->mm_node->start << PAGE_SHIFT;
-		mem->bus.base = drm_get_resource_start(dev, 1);
+		mem->bus.base = pci_resource_start(dev->pdev, 1);
 		mem->bus.is_iomem = true;
 		break;
 	default:
diff --git a/drivers/gpu/drm/nouveau/nouveau_calc.c b/drivers/gpu/drm/nouveau/nouveau_calc.c
index 88f9bc0941e..ca85da78484 100644
--- a/drivers/gpu/drm/nouveau/nouveau_calc.c
+++ b/drivers/gpu/drm/nouveau/nouveau_calc.c
@@ -200,7 +200,7 @@ nv04_update_arb(struct drm_device *dev, int VClk, int bpp,
 	struct nv_sim_state sim_data;
 	int MClk = nouveau_hw_get_clock(dev, MPLL);
 	int NVClk = nouveau_hw_get_clock(dev, NVPLL);
-	uint32_t cfg1 = nvReadFB(dev, NV_PFB_CFG1);
+	uint32_t cfg1 = nvReadFB(dev, NV04_PFB_CFG1);
 
 	sim_data.pclk_khz = VClk;
 	sim_data.mclk_khz = MClk;
@@ -218,7 +218,7 @@ nv04_update_arb(struct drm_device *dev, int VClk, int bpp,
 		sim_data.mem_latency = 3;
 		sim_data.mem_page_miss = 10;
 	} else {
-		sim_data.memory_type = nvReadFB(dev, NV_PFB_CFG0) & 0x1;
+		sim_data.memory_type = nvReadFB(dev, NV04_PFB_CFG0) & 0x1;
 		sim_data.memory_width = (nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) & 0x10) ? 128 : 64;
 		sim_data.mem_latency = cfg1 & 0xf;
 		sim_data.mem_page_miss = ((cfg1 >> 4) & 0xf) + ((cfg1 >> 31) & 0x1);
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index 1fc57ef5829..90fdcda332b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -62,7 +62,8 @@ nouveau_channel_pushbuf_ctxdma_init(struct nouveau_channel *chan)
 		 * VRAM.
 		 */
 		ret = nouveau_gpuobj_dma_new(chan, NV_CLASS_DMA_IN_MEMORY,
-					     drm_get_resource_start(dev, 1),
+					     pci_resource_start(dev->pdev,
+					     1),
 					     dev_priv->fb_available_size,
 					     NV_DMA_ACCESS_RO,
 					     NV_DMA_TARGET_PCI, &pushbuf);
@@ -257,9 +258,7 @@ nouveau_channel_free(struct nouveau_channel *chan)
 	nouveau_debugfs_channel_fini(chan);
 
 	/* Give outstanding push buffers a chance to complete */
-	spin_lock_irqsave(&chan->fence.lock, flags);
 	nouveau_fence_update(chan);
-	spin_unlock_irqrestore(&chan->fence.lock, flags);
 	if (chan->fence.sequence != chan->fence.sequence_ack) {
 		struct nouveau_fence *fence = NULL;
 
@@ -368,8 +367,6 @@ nouveau_ioctl_fifo_alloc(struct drm_device *dev, void *data,
 	struct nouveau_channel *chan;
 	int ret;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	if (dev_priv->engine.graph.accel_blocked)
 		return -ENODEV;
 
@@ -418,7 +415,6 @@ nouveau_ioctl_fifo_free(struct drm_device *dev, void *data,
 	struct drm_nouveau_channel_free *cfree = data;
 	struct nouveau_channel *chan;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
 	NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(cfree->channel, file_priv, chan);
 
 	nouveau_channel_free(chan);
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 149ed224c3c..734e92635e8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -102,63 +102,15 @@ nouveau_connector_destroy(struct drm_connector *drm_connector)
 	kfree(drm_connector);
 }
 
-static void
-nouveau_connector_ddc_prepare(struct drm_connector *connector, int *flags)
-{
-	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
-
-	if (dev_priv->card_type >= NV_50)
-		return;
-
-	*flags = 0;
-	if (NVLockVgaCrtcs(dev_priv->dev, false))
-		*flags |= 1;
-	if (nv_heads_tied(dev_priv->dev))
-		*flags |= 2;
-
-	if (*flags & 2)
-		NVSetOwner(dev_priv->dev, 0); /* necessary? */
-}
-
-static void
-nouveau_connector_ddc_finish(struct drm_connector *connector, int flags)
-{
-	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
-
-	if (dev_priv->card_type >= NV_50)
-		return;
-
-	if (flags & 2)
-		NVSetOwner(dev_priv->dev, 4);
-	if (flags & 1)
-		NVLockVgaCrtcs(dev_priv->dev, true);
-}
-
 static struct nouveau_i2c_chan *
 nouveau_connector_ddc_detect(struct drm_connector *connector,
 			     struct nouveau_encoder **pnv_encoder)
 {
 	struct drm_device *dev = connector->dev;
-	uint8_t out_buf[] = { 0x0, 0x0}, buf[2];
-	int ret, flags, i;
-
-	struct i2c_msg msgs[] = {
-		{
-			.addr = 0x50,
-			.flags = 0,
-			.len = 1,
-			.buf = out_buf,
-		},
-		{
-			.addr = 0x50,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = buf,
-		}
-	};
+	int i;
 
 	for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
-		struct nouveau_i2c_chan *i2c = NULL;
+		struct nouveau_i2c_chan *i2c;
 		struct nouveau_encoder *nv_encoder;
 		struct drm_mode_object *obj;
 		int id;
@@ -171,17 +123,9 @@ nouveau_connector_ddc_detect(struct drm_connector *connector,
 		if (!obj)
 			continue;
 		nv_encoder = nouveau_encoder(obj_to_encoder(obj));
+		i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
 
-		if (nv_encoder->dcb->i2c_index < 0xf)
-			i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
-		if (!i2c)
-			continue;
-
-		nouveau_connector_ddc_prepare(connector, &flags);
-		ret = i2c_transfer(&i2c->adapter, msgs, 2);
-		nouveau_connector_ddc_finish(connector, flags);
-
-		if (ret == 2) {
+		if (i2c && nouveau_probe_i2c_addr(i2c, 0x50)) {
 			*pnv_encoder = nv_encoder;
 			return i2c;
 		}
@@ -234,21 +178,7 @@ nouveau_connector_detect(struct drm_connector *connector)
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder = NULL;
 	struct nouveau_i2c_chan *i2c;
-	int type, flags;
-
-	if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS)
-		nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
-	if (nv_encoder && nv_connector->native_mode) {
-		unsigned status = connector_status_connected;
-
-#if defined(CONFIG_ACPI_BUTTON) || \
-	(defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
-		if (!nouveau_ignorelid && !acpi_lid_open())
-			status = connector_status_unknown;
-#endif
-		nouveau_connector_set_encoder(connector, nv_encoder);
-		return status;
-	}
+	int type;
 
 	/* Cleanup the previous EDID block. */
 	if (nv_connector->edid) {
@@ -259,9 +189,7 @@ nouveau_connector_detect(struct drm_connector *connector)
 
 	i2c = nouveau_connector_ddc_detect(connector, &nv_encoder);
 	if (i2c) {
-		nouveau_connector_ddc_prepare(connector, &flags);
 		nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
-		nouveau_connector_ddc_finish(connector, flags);
 		drm_mode_connector_update_edid_property(connector,
 							nv_connector->edid);
 		if (!nv_connector->edid) {
@@ -321,6 +249,85 @@ detect_analog:
 	return connector_status_disconnected;
 }
 
+static enum drm_connector_status
+nouveau_connector_detect_lvds(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct nouveau_encoder *nv_encoder = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
+
+	/* Cleanup the previous EDID block. */
+	if (nv_connector->edid) {
+		drm_mode_connector_update_edid_property(connector, NULL);
+		kfree(nv_connector->edid);
+		nv_connector->edid = NULL;
+	}
+
+	nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
+	if (!nv_encoder)
+		return connector_status_disconnected;
+
+	/* Try retrieving EDID via DDC */
+	if (!dev_priv->vbios.fp_no_ddc) {
+		status = nouveau_connector_detect(connector);
+		if (status == connector_status_connected)
+			goto out;
+	}
+
+	/* On some laptops (Sony, i'm looking at you) there appears to
+	 * be no direct way of accessing the panel's EDID.  The only
+	 * option available to us appears to be to ask ACPI for help..
+	 *
+	 * It's important this check's before trying straps, one of the
+	 * said manufacturer's laptops are configured in such a way
+	 * the nouveau decides an entry in the VBIOS FP mode table is
+	 * valid - it's not (rh#613284)
+	 */
+	if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
+		if (!nouveau_acpi_edid(dev, connector)) {
+			status = connector_status_connected;
+			goto out;
+		}
+	}
+
+	/* If no EDID found above, and the VBIOS indicates a hardcoded
+	 * modeline is avalilable for the panel, set it as the panel's
+	 * native mode and exit.
+	 */
+	if (nouveau_bios_fp_mode(dev, NULL) && (dev_priv->vbios.fp_no_ddc ||
+	    nv_encoder->dcb->lvdsconf.use_straps_for_mode)) {
+		status = connector_status_connected;
+		goto out;
+	}
+
+	/* Still nothing, some VBIOS images have a hardcoded EDID block
+	 * stored for the panel stored in them.
+	 */
+	if (!dev_priv->vbios.fp_no_ddc) {
+		struct edid *edid =
+			(struct edid *)nouveau_bios_embedded_edid(dev);
+		if (edid) {
+			nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+			*(nv_connector->edid) = *edid;
+			status = connector_status_connected;
+		}
+	}
+
+out:
+#if defined(CONFIG_ACPI_BUTTON) || \
+	(defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
+	if (status == connector_status_connected &&
+	    !nouveau_ignorelid && !acpi_lid_open())
+		status = connector_status_unknown;
+#endif
+
+	drm_mode_connector_update_edid_property(connector, nv_connector->edid);
+	nouveau_connector_set_encoder(connector, nv_encoder);
+	return status;
+}
+
 static void
 nouveau_connector_force(struct drm_connector *connector)
 {
@@ -441,7 +448,8 @@ nouveau_connector_native_mode(struct drm_connector *connector)
 	int high_w = 0, high_h = 0, high_v = 0;
 
 	list_for_each_entry(mode, &nv_connector->base.probed_modes, head) {
-		if (helper->mode_valid(connector, mode) != MODE_OK)
+		if (helper->mode_valid(connector, mode) != MODE_OK ||
+		    (mode->flags & DRM_MODE_FLAG_INTERLACE))
 			continue;
 
 		/* Use preferred mode if there is one.. */
@@ -534,21 +542,27 @@ static int
 nouveau_connector_get_modes(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 	int ret = 0;
 
-	/* If we're not LVDS, destroy the previous native mode, the attached
-	 * monitor could have changed.
+	/* destroy the native mode, the attached monitor could have changed.
 	 */
-	if (nv_connector->dcb->type != DCB_CONNECTOR_LVDS &&
-	    nv_connector->native_mode) {
+	if (nv_connector->native_mode) {
 		drm_mode_destroy(dev, nv_connector->native_mode);
 		nv_connector->native_mode = NULL;
 	}
 
 	if (nv_connector->edid)
 		ret = drm_add_edid_modes(connector, nv_connector->edid);
+	else
+	if (nv_encoder->dcb->type == OUTPUT_LVDS &&
+	    (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
+	     dev_priv->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
+		nv_connector->native_mode = drm_mode_create(dev);
+		nouveau_bios_fp_mode(dev, nv_connector->native_mode);
+	}
 
 	/* Find the native mode if this is a digital panel, if we didn't
 	 * find any modes through DDC previously add the native mode to
@@ -569,7 +583,8 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 		ret = get_slave_funcs(nv_encoder)->
 			get_modes(to_drm_encoder(nv_encoder), connector);
 
-	if (nv_encoder->dcb->type == OUTPUT_LVDS)
+	if (nv_connector->dcb->type == DCB_CONNECTOR_LVDS ||
+	    nv_connector->dcb->type == DCB_CONNECTOR_eDP)
 		ret += nouveau_connector_scaler_modes_add(connector);
 
 	return ret;
@@ -643,6 +658,44 @@ nouveau_connector_best_encoder(struct drm_connector *connector)
 	return NULL;
 }
 
+void
+nouveau_connector_set_polling(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	bool spare_crtc = false;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		spare_crtc |= !crtc->enabled;
+
+	connector->polled = 0;
+
+	switch (connector->connector_type) {
+	case DRM_MODE_CONNECTOR_VGA:
+	case DRM_MODE_CONNECTOR_TV:
+		if (dev_priv->card_type >= NV_50 ||
+		    (nv_gf4_disp_arch(dev) && spare_crtc))
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		break;
+
+	case DRM_MODE_CONNECTOR_DVII:
+	case DRM_MODE_CONNECTOR_DVID:
+	case DRM_MODE_CONNECTOR_HDMIA:
+	case DRM_MODE_CONNECTOR_DisplayPort:
+	case DRM_MODE_CONNECTOR_eDP:
+		if (dev_priv->card_type >= NV_50)
+			connector->polled = DRM_CONNECTOR_POLL_HPD;
+		else if (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
+			 spare_crtc)
+			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		break;
+
+	default:
+		break;
+	}
+}
+
 static const struct drm_connector_helper_funcs
 nouveau_connector_helper_funcs = {
 	.get_modes = nouveau_connector_get_modes,
@@ -662,148 +715,74 @@ nouveau_connector_funcs = {
 	.force = nouveau_connector_force
 };
 
-static int
-nouveau_connector_create_lvds(struct drm_device *dev,
-			      struct drm_connector *connector)
-{
-	struct nouveau_connector *nv_connector = nouveau_connector(connector);
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_i2c_chan *i2c = NULL;
-	struct nouveau_encoder *nv_encoder;
-	struct drm_display_mode native, *mode, *temp;
-	bool dummy, if_is_24bit = false;
-	int ret, flags;
-
-	nv_encoder = find_encoder_by_type(connector, OUTPUT_LVDS);
-	if (!nv_encoder)
-		return -ENODEV;
-
-	ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &if_is_24bit);
-	if (ret) {
-		NV_ERROR(dev, "Error parsing LVDS table, disabling LVDS\n");
-		return ret;
-	}
-	nv_connector->use_dithering = !if_is_24bit;
-
-	/* Firstly try getting EDID over DDC, if allowed and I2C channel
-	 * is available.
-	 */
-	if (!dev_priv->vbios.fp_no_ddc && nv_encoder->dcb->i2c_index < 0xf)
-		i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
-
-	if (i2c) {
-		nouveau_connector_ddc_prepare(connector, &flags);
-		nv_connector->edid = drm_get_edid(connector, &i2c->adapter);
-		nouveau_connector_ddc_finish(connector, flags);
-	}
-
-	/* If no EDID found above, and the VBIOS indicates a hardcoded
-	 * modeline is avalilable for the panel, set it as the panel's
-	 * native mode and exit.
-	 */
-	if (!nv_connector->edid && nouveau_bios_fp_mode(dev, &native) &&
-	     (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
-	      dev_priv->vbios.fp_no_ddc)) {
-		nv_connector->native_mode = drm_mode_duplicate(dev, &native);
-		goto out;
-	}
-
-	/* Still nothing, some VBIOS images have a hardcoded EDID block
-	 * stored for the panel stored in them.
-	 */
-	if (!nv_connector->edid && !nv_connector->native_mode &&
-	    !dev_priv->vbios.fp_no_ddc) {
-		struct edid *edid =
-			(struct edid *)nouveau_bios_embedded_edid(dev);
-		if (edid) {
-			nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
-			*(nv_connector->edid) = *edid;
-		}
-	}
-
-	if (!nv_connector->edid)
-		goto out;
-
-	/* We didn't find/use a panel mode from the VBIOS, so parse the EDID
-	 * block and look for the preferred mode there.
-	 */
-	ret = drm_add_edid_modes(connector, nv_connector->edid);
-	if (ret == 0)
-		goto out;
-	nv_connector->detected_encoder = nv_encoder;
-	nv_connector->native_mode = nouveau_connector_native_mode(connector);
-	list_for_each_entry_safe(mode, temp, &connector->probed_modes, head)
-		drm_mode_remove(connector, mode);
-
-out:
-	if (!nv_connector->native_mode) {
-		NV_ERROR(dev, "LVDS present in DCB table, but couldn't "
-			      "determine its native mode.  Disabling.\n");
-		return -ENODEV;
-	}
-
-	drm_mode_connector_update_edid_property(connector, nv_connector->edid);
-	return 0;
-}
+static const struct drm_connector_funcs
+nouveau_connector_funcs_lvds = {
+	.dpms = drm_helper_connector_dpms,
+	.save = NULL,
+	.restore = NULL,
+	.detect = nouveau_connector_detect_lvds,
+	.destroy = nouveau_connector_destroy,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = nouveau_connector_set_property,
+	.force = nouveau_connector_force
+};
 
-int
-nouveau_connector_create(struct drm_device *dev,
-			 struct dcb_connector_table_entry *dcb)
+struct drm_connector *
+nouveau_connector_create(struct drm_device *dev, int index)
 {
+	const struct drm_connector_funcs *funcs = &nouveau_connector_funcs;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_connector *nv_connector = NULL;
+	struct dcb_connector_table_entry *dcb = NULL;
 	struct drm_connector *connector;
-	struct drm_encoder *encoder;
-	int ret, type;
+	int type, ret = 0;
 
 	NV_DEBUG_KMS(dev, "\n");
 
+	if (index >= dev_priv->vbios.dcb.connector.entries)
+		return ERR_PTR(-EINVAL);
+
+	dcb = &dev_priv->vbios.dcb.connector.entry[index];
+	if (dcb->drm)
+		return dcb->drm;
+
 	switch (dcb->type) {
-	case DCB_CONNECTOR_NONE:
-		return 0;
 	case DCB_CONNECTOR_VGA:
-		NV_INFO(dev, "Detected a VGA connector\n");
 		type = DRM_MODE_CONNECTOR_VGA;
 		break;
 	case DCB_CONNECTOR_TV_0:
 	case DCB_CONNECTOR_TV_1:
 	case DCB_CONNECTOR_TV_3:
-		NV_INFO(dev, "Detected a TV connector\n");
 		type = DRM_MODE_CONNECTOR_TV;
 		break;
 	case DCB_CONNECTOR_DVI_I:
-		NV_INFO(dev, "Detected a DVI-I connector\n");
 		type = DRM_MODE_CONNECTOR_DVII;
 		break;
 	case DCB_CONNECTOR_DVI_D:
-		NV_INFO(dev, "Detected a DVI-D connector\n");
 		type = DRM_MODE_CONNECTOR_DVID;
 		break;
 	case DCB_CONNECTOR_HDMI_0:
 	case DCB_CONNECTOR_HDMI_1:
-		NV_INFO(dev, "Detected a HDMI connector\n");
 		type = DRM_MODE_CONNECTOR_HDMIA;
 		break;
 	case DCB_CONNECTOR_LVDS:
-		NV_INFO(dev, "Detected a LVDS connector\n");
 		type = DRM_MODE_CONNECTOR_LVDS;
+		funcs = &nouveau_connector_funcs_lvds;
 		break;
 	case DCB_CONNECTOR_DP:
-		NV_INFO(dev, "Detected a DisplayPort connector\n");
 		type = DRM_MODE_CONNECTOR_DisplayPort;
 		break;
 	case DCB_CONNECTOR_eDP:
-		NV_INFO(dev, "Detected an eDP connector\n");
 		type = DRM_MODE_CONNECTOR_eDP;
 		break;
 	default:
 		NV_ERROR(dev, "unknown connector type: 0x%02x!!\n", dcb->type);
-		return -EINVAL;
+		return ERR_PTR(-EINVAL);
 	}
 
 	nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
 	if (!nv_connector)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	nv_connector->dcb = dcb;
 	connector = &nv_connector->base;
 
@@ -811,27 +790,21 @@ nouveau_connector_create(struct drm_device *dev,
 	connector->interlace_allowed = false;
 	connector->doublescan_allowed = false;
 
-	drm_connector_init(dev, connector, &nouveau_connector_funcs, type);
+	drm_connector_init(dev, connector, funcs, type);
 	drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
 
-	/* attach encoders */
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-
-		if (nv_encoder->dcb->connector != dcb->index)
-			continue;
-
-		if (get_slave_funcs(nv_encoder))
-			get_slave_funcs(nv_encoder)->create_resources(encoder, connector);
+	/* Check if we need dithering enabled */
+	if (dcb->type == DCB_CONNECTOR_LVDS) {
+		bool dummy, is_24bit = false;
 
-		drm_mode_connector_attach_encoder(connector, encoder);
-	}
+		ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &is_24bit);
+		if (ret) {
+			NV_ERROR(dev, "Error parsing LVDS table, disabling "
+				 "LVDS\n");
+			goto fail;
+		}
 
-	if (!connector->encoder_ids[0]) {
-		NV_WARN(dev, "  no encoders, ignoring\n");
-		drm_connector_cleanup(connector);
-		kfree(connector);
-		return 0;
+		nv_connector->use_dithering = !is_24bit;
 	}
 
 	/* Init DVI-I specific properties */
@@ -841,12 +814,8 @@ nouveau_connector_create(struct drm_device *dev,
 		drm_connector_attach_property(connector, dev->mode_config.dvi_i_select_subconnector_property, 0);
 	}
 
-	if (dcb->type != DCB_CONNECTOR_LVDS)
-		nv_connector->use_dithering = false;
-
 	switch (dcb->type) {
 	case DCB_CONNECTOR_VGA:
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		if (dev_priv->card_type >= NV_50) {
 			drm_connector_attach_property(connector,
 					dev->mode_config.scaling_mode_property,
@@ -858,17 +827,6 @@ nouveau_connector_create(struct drm_device *dev,
 	case DCB_CONNECTOR_TV_3:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
 		break;
-	case DCB_CONNECTOR_DP:
-	case DCB_CONNECTOR_eDP:
-	case DCB_CONNECTOR_HDMI_0:
-	case DCB_CONNECTOR_HDMI_1:
-	case DCB_CONNECTOR_DVI_I:
-	case DCB_CONNECTOR_DVI_D:
-		if (dev_priv->card_type >= NV_50)
-			connector->polled = DRM_CONNECTOR_POLL_HPD;
-		else
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-		/* fall-through */
 	default:
 		nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
 
@@ -882,15 +840,15 @@ nouveau_connector_create(struct drm_device *dev,
 		break;
 	}
 
+	nouveau_connector_set_polling(connector);
+
 	drm_sysfs_connector_add(connector);
+	dcb->drm = connector;
+	return dcb->drm;
 
-	if (dcb->type == DCB_CONNECTOR_LVDS) {
-		ret = nouveau_connector_create_lvds(dev, connector);
-		if (ret) {
-			connector->funcs->destroy(connector);
-			return ret;
-		}
-	}
+fail:
+	drm_connector_cleanup(connector);
+	kfree(connector);
+	return ERR_PTR(ret);
 
-	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h
index 4ef38abc2d9..0d2e668ccfe 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.h
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
@@ -49,7 +49,10 @@ static inline struct nouveau_connector *nouveau_connector(
 	return container_of(con, struct nouveau_connector, base);
 }
 
-int nouveau_connector_create(struct drm_device *,
-			     struct dcb_connector_table_entry *);
+struct drm_connector *
+nouveau_connector_create(struct drm_device *, int index);
+
+void
+nouveau_connector_set_polling(struct drm_connector *);
 
 #endif /* __NOUVEAU_CONNECTOR_H__ */
diff --git a/drivers/gpu/drm/nouveau/nouveau_dma.c b/drivers/gpu/drm/nouveau/nouveau_dma.c
index 65c441a1999..2e3c6caa97e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dma.c
@@ -92,11 +92,9 @@ nouveau_dma_init(struct nouveau_channel *chan)
 		return ret;
 
 	/* Map M2MF notifier object - fbcon. */
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = nouveau_bo_map(chan->notifier_bo);
-		if (ret)
-			return ret;
-	}
+	ret = nouveau_bo_map(chan->notifier_bo);
+	if (ret)
+		return ret;
 
 	/* Insert NOPS for NOUVEAU_DMA_SKIPS */
 	ret = RING_SPACE(chan, NOUVEAU_DMA_SKIPS);
diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index deeb21c6865..33742b11188 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -23,8 +23,10 @@
  */
 
 #include "drmP.h"
+
 #include "nouveau_drv.h"
 #include "nouveau_i2c.h"
+#include "nouveau_connector.h"
 #include "nouveau_encoder.h"
 
 static int
@@ -270,13 +272,39 @@ bool
 nouveau_dp_link_train(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
 	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-	uint8_t config[4];
-	uint8_t status[3];
+	struct nouveau_connector *nv_connector;
+	struct bit_displayport_encoder_table *dpe;
+	int dpe_headerlen;
+	uint8_t config[4], status[3];
 	bool cr_done, cr_max_vs, eq_done;
 	int ret = 0, i, tries, voltage;
 
 	NV_DEBUG_KMS(dev, "link training!!\n");
+
+	nv_connector = nouveau_encoder_connector_get(nv_encoder);
+	if (!nv_connector)
+		return false;
+
+	dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
+	if (!dpe) {
+		NV_ERROR(dev, "SOR-%d: no DP encoder table!\n", nv_encoder->or);
+		return false;
+	}
+
+	/* disable hotplug detect, this flips around on some panels during
+	 * link training.
+	 */
+	pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, false);
+
+	if (dpe->script0) {
+		NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or);
+		nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0),
+					    nv_encoder->dcb);
+	}
+
 train:
 	cr_done = eq_done = false;
 
@@ -403,6 +431,15 @@ stop:
 		}
 	}
 
+	if (dpe->script1) {
+		NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or);
+		nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1),
+					    nv_encoder->dcb);
+	}
+
+	/* re-enable hotplug detect */
+	pgpio->irq_enable(dev, nv_connector->dcb->gpio_tag, true);
+
 	return eq_done;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c
index 27377043229..1de5eb53e01 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.c
@@ -35,10 +35,6 @@
 
 #include "drm_pciids.h"
 
-MODULE_PARM_DESC(ctxfw, "Use external firmware blob for grctx init (NV40)");
-int nouveau_ctxfw = 0;
-module_param_named(ctxfw, nouveau_ctxfw, int, 0400);
-
 MODULE_PARM_DESC(noagp, "Disable AGP");
 int nouveau_noagp;
 module_param_named(noagp, nouveau_noagp, int, 0400);
@@ -56,7 +52,7 @@ int nouveau_vram_pushbuf;
 module_param_named(vram_pushbuf, nouveau_vram_pushbuf, int, 0400);
 
 MODULE_PARM_DESC(vram_notify, "Force DMA notifiers to be in VRAM");
-int nouveau_vram_notify = 1;
+int nouveau_vram_notify = 0;
 module_param_named(vram_notify, nouveau_vram_notify, int, 0400);
 
 MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (>=GeForce 8)");
@@ -132,7 +128,7 @@ static struct drm_driver driver;
 static int __devinit
 nouveau_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	return drm_get_dev(pdev, ent, &driver);
+	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
 static void
@@ -155,9 +151,6 @@ nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state)
 	struct drm_crtc *crtc;
 	int ret, i;
 
-	if (!drm_core_check_feature(dev, DRIVER_MODESET))
-		return -ENODEV;
-
 	if (pm_state.event == PM_EVENT_PRETHAW)
 		return 0;
 
@@ -257,9 +250,6 @@ nouveau_pci_resume(struct pci_dev *pdev)
 	struct drm_crtc *crtc;
 	int ret, i;
 
-	if (!drm_core_check_feature(dev, DRIVER_MODESET))
-		return -ENODEV;
-
 	nouveau_fbcon_save_disable_accel(dev);
 
 	NV_INFO(dev, "We're back, enabling device...\n");
@@ -269,6 +259,13 @@ nouveau_pci_resume(struct pci_dev *pdev)
 		return -1;
 	pci_set_master(dev->pdev);
 
+	/* Make sure the AGP controller is in a consistent state */
+	if (dev_priv->gart_info.type == NOUVEAU_GART_AGP)
+		nouveau_mem_reset_agp(dev);
+
+	/* Make the CRTCs accessible */
+	engine->display.early_init(dev);
+
 	NV_INFO(dev, "POSTing device...\n");
 	ret = nouveau_run_vbios_init(dev);
 	if (ret)
@@ -323,7 +320,6 @@ nouveau_pci_resume(struct pci_dev *pdev)
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
-		int ret;
 
 		ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM);
 		if (!ret)
@@ -332,11 +328,7 @@ nouveau_pci_resume(struct pci_dev *pdev)
 			NV_ERROR(dev, "Could not pin/map cursor.\n");
 	}
 
-	if (dev_priv->card_type < NV_50) {
-		nv04_display_restore(dev);
-		NVLockVgaCrtcs(dev, false);
-	} else
-		nv50_display_init(dev);
+	engine->display.init(dev);
 
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
@@ -371,7 +363,8 @@ nouveau_pci_resume(struct pci_dev *pdev)
 static struct drm_driver driver = {
 	.driver_features =
 		DRIVER_USE_AGP | DRIVER_PCI_DMA | DRIVER_SG |
-		DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM,
+		DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM |
+		DRIVER_MODESET,
 	.load = nouveau_load,
 	.firstopen = nouveau_firstopen,
 	.lastclose = nouveau_lastclose,
@@ -438,16 +431,18 @@ static int __init nouveau_init(void)
 			nouveau_modeset = 1;
 	}
 
-	if (nouveau_modeset == 1) {
-		driver.driver_features |= DRIVER_MODESET;
-		nouveau_register_dsm_handler();
-	}
+	if (!nouveau_modeset)
+		return 0;
 
+	nouveau_register_dsm_handler();
 	return drm_init(&driver);
 }
 
 static void __exit nouveau_exit(void)
 {
+	if (!nouveau_modeset)
+		return;
+
 	drm_exit(&driver);
 	nouveau_unregister_dsm_handler();
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index c6971910648..e15db15dca7 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -123,14 +123,6 @@ nvbo_kmap_obj_iovirtual(struct nouveau_bo *nvbo)
 	return ioptr;
 }
 
-struct mem_block {
-	struct mem_block *next;
-	struct mem_block *prev;
-	uint64_t start;
-	uint64_t size;
-	struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */
-};
-
 enum nouveau_flags {
 	NV_NFORCE   = 0x10000000,
 	NV_NFORCE2  = 0x20000000
@@ -149,7 +141,7 @@ struct nouveau_gpuobj {
 	struct list_head list;
 
 	struct nouveau_channel *im_channel;
-	struct mem_block *im_pramin;
+	struct drm_mm_node *im_pramin;
 	struct nouveau_bo *im_backing;
 	uint32_t im_backing_start;
 	uint32_t *im_backing_suspend;
@@ -196,7 +188,7 @@ struct nouveau_channel {
 		struct list_head pending;
 		uint32_t sequence;
 		uint32_t sequence_ack;
-		uint32_t last_sequence_irq;
+		atomic_t last_sequence_irq;
 	} fence;
 
 	/* DMA push buffer */
@@ -206,7 +198,7 @@ struct nouveau_channel {
 
 	/* Notifier memory */
 	struct nouveau_bo *notifier_bo;
-	struct mem_block *notifier_heap;
+	struct drm_mm notifier_heap;
 
 	/* PFIFO context */
 	struct nouveau_gpuobj_ref *ramfc;
@@ -224,7 +216,7 @@ struct nouveau_channel {
 
 	/* Objects */
 	struct nouveau_gpuobj_ref *ramin; /* Private instmem */
-	struct mem_block          *ramin_heap; /* Private PRAMIN heap */
+	struct drm_mm              ramin_heap; /* Private PRAMIN heap */
 	struct nouveau_gpuobj_ref *ramht; /* Hash table */
 	struct list_head           ramht_refs; /* Objects referenced by RAMHT */
 
@@ -277,8 +269,7 @@ struct nouveau_instmem_engine {
 	void	(*clear)(struct drm_device *, struct nouveau_gpuobj *);
 	int	(*bind)(struct drm_device *, struct nouveau_gpuobj *);
 	int	(*unbind)(struct drm_device *, struct nouveau_gpuobj *);
-	void	(*prepare_access)(struct drm_device *, bool write);
-	void	(*finish_access)(struct drm_device *);
+	void	(*flush)(struct drm_device *);
 };
 
 struct nouveau_mc_engine {
@@ -303,10 +294,11 @@ struct nouveau_fb_engine {
 };
 
 struct nouveau_fifo_engine {
-	void *priv;
-
 	int  channels;
 
+	struct nouveau_gpuobj_ref *playlist[2];
+	int cur_playlist;
+
 	int  (*init)(struct drm_device *);
 	void (*takedown)(struct drm_device *);
 
@@ -339,10 +331,11 @@ struct nouveau_pgraph_object_class {
 struct nouveau_pgraph_engine {
 	struct nouveau_pgraph_object_class *grclass;
 	bool accel_blocked;
-	void *ctxprog;
-	void *ctxvals;
 	int grctx_size;
 
+	/* NV2x/NV3x context table (0x400780) */
+	struct nouveau_gpuobj_ref *ctx_table;
+
 	int  (*init)(struct drm_device *);
 	void (*takedown)(struct drm_device *);
 
@@ -358,6 +351,24 @@ struct nouveau_pgraph_engine {
 				  uint32_t size, uint32_t pitch);
 };
 
+struct nouveau_display_engine {
+	int (*early_init)(struct drm_device *);
+	void (*late_takedown)(struct drm_device *);
+	int (*create)(struct drm_device *);
+	int (*init)(struct drm_device *);
+	void (*destroy)(struct drm_device *);
+};
+
+struct nouveau_gpio_engine {
+	int  (*init)(struct drm_device *);
+	void (*takedown)(struct drm_device *);
+
+	int  (*get)(struct drm_device *, enum dcb_gpio_tag);
+	int  (*set)(struct drm_device *, enum dcb_gpio_tag, int state);
+
+	void (*irq_enable)(struct drm_device *, enum dcb_gpio_tag, bool on);
+};
+
 struct nouveau_engine {
 	struct nouveau_instmem_engine instmem;
 	struct nouveau_mc_engine      mc;
@@ -365,6 +376,8 @@ struct nouveau_engine {
 	struct nouveau_fb_engine      fb;
 	struct nouveau_pgraph_engine  graph;
 	struct nouveau_fifo_engine    fifo;
+	struct nouveau_display_engine display;
+	struct nouveau_gpio_engine    gpio;
 };
 
 struct nouveau_pll_vals {
@@ -500,11 +513,6 @@ enum nouveau_card_type {
 
 struct drm_nouveau_private {
 	struct drm_device *dev;
-	enum {
-		NOUVEAU_CARD_INIT_DOWN,
-		NOUVEAU_CARD_INIT_DONE,
-		NOUVEAU_CARD_INIT_FAILED
-	} init_state;
 
 	/* the card type, takes NV_* as values */
 	enum nouveau_card_type card_type;
@@ -525,7 +533,7 @@ struct drm_nouveau_private {
 	struct list_head vbl_waiting;
 
 	struct {
-		struct ttm_global_reference mem_global_ref;
+		struct drm_global_reference mem_global_ref;
 		struct ttm_bo_global_ref bo_global_ref;
 		struct ttm_bo_device bdev;
 		spinlock_t bo_list_lock;
@@ -533,8 +541,6 @@ struct drm_nouveau_private {
 		atomic_t validate_sequence;
 	} ttm;
 
-	struct fb_info *fbdev_info;
-
 	int fifo_alloc_count;
 	struct nouveau_channel *fifos[NOUVEAU_MAX_CHANNEL_NR];
 
@@ -595,11 +601,7 @@ struct drm_nouveau_private {
 	struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
 	int vm_vram_pt_nr;
 
-	struct mem_block *ramin_heap;
-
-	/* context table pointed to be NV_PGRAPH_CHANNEL_CTX_TABLE (0x400780) */
-	uint32_t ctx_table_size;
-	struct nouveau_gpuobj_ref *ctx_table;
+	struct drm_mm ramin_heap;
 
 	struct list_head gpuobj_list;
 
@@ -618,6 +620,11 @@ struct drm_nouveau_private {
 	struct backlight_device *backlight;
 
 	struct nouveau_channel *evo;
+	struct {
+		struct dcb_entry *dcb;
+		u16 script;
+		u32 pclk;
+	} evo_irq;
 
 	struct {
 		struct dentry *channel_root;
@@ -652,14 +659,6 @@ nouveau_bo_ref(struct nouveau_bo *ref, struct nouveau_bo **pnvbo)
 	return 0;
 }
 
-#define NOUVEAU_CHECK_INITIALISED_WITH_RETURN do {            \
-	struct drm_nouveau_private *nv = dev->dev_private;    \
-	if (nv->init_state != NOUVEAU_CARD_INIT_DONE) {       \
-		NV_ERROR(dev, "called without init\n");       \
-		return -EINVAL;                               \
-	}                                                     \
-} while (0)
-
 #define NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(id, cl, ch) do {    \
 	struct drm_nouveau_private *nv = dev->dev_private;       \
 	if (!nouveau_channel_owner(dev, (cl), (id))) {           \
@@ -682,7 +681,6 @@ extern int nouveau_tv_disable;
 extern char *nouveau_tv_norm;
 extern int nouveau_reg_debug;
 extern char *nouveau_vbios;
-extern int nouveau_ctxfw;
 extern int nouveau_ignorelid;
 extern int nouveau_nofbaccel;
 extern int nouveau_noaccel;
@@ -707,17 +705,10 @@ extern bool nouveau_wait_for_idle(struct drm_device *);
 extern int  nouveau_card_init(struct drm_device *);
 
 /* nouveau_mem.c */
-extern int  nouveau_mem_init_heap(struct mem_block **, uint64_t start,
-				 uint64_t size);
-extern struct mem_block *nouveau_mem_alloc_block(struct mem_block *,
-						 uint64_t size, int align2,
-						 struct drm_file *, int tail);
-extern void nouveau_mem_takedown(struct mem_block **heap);
-extern void nouveau_mem_free_block(struct mem_block *);
 extern int  nouveau_mem_detect(struct drm_device *dev);
-extern void nouveau_mem_release(struct drm_file *, struct mem_block *heap);
 extern int  nouveau_mem_init(struct drm_device *);
 extern int  nouveau_mem_init_agp(struct drm_device *);
+extern int  nouveau_mem_reset_agp(struct drm_device *);
 extern void nouveau_mem_close(struct drm_device *);
 extern struct nouveau_tile_reg *nv10_mem_set_tiling(struct drm_device *dev,
 						    uint32_t addr,
@@ -857,11 +848,13 @@ void nouveau_register_dsm_handler(void);
 void nouveau_unregister_dsm_handler(void);
 int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len);
 bool nouveau_acpi_rom_supported(struct pci_dev *pdev);
+int nouveau_acpi_edid(struct drm_device *, struct drm_connector *);
 #else
 static inline void nouveau_register_dsm_handler(void) {}
 static inline void nouveau_unregister_dsm_handler(void) {}
 static inline bool nouveau_acpi_rom_supported(struct pci_dev *pdev) { return false; }
 static inline int nouveau_acpi_get_bios_chunk(uint8_t *bios, int offset, int len) { return -EINVAL; }
+static inline int nouveau_acpi_edid(struct drm_device *dev, struct drm_connector *connector) { return -EINVAL; }
 #endif
 
 /* nouveau_backlight.c */
@@ -924,6 +917,10 @@ extern void nv10_fb_takedown(struct drm_device *);
 extern void nv10_fb_set_region_tiling(struct drm_device *, int, uint32_t,
 				      uint32_t, uint32_t);
 
+/* nv30_fb.c */
+extern int  nv30_fb_init(struct drm_device *);
+extern void nv30_fb_takedown(struct drm_device *);
+
 /* nv40_fb.c */
 extern int  nv40_fb_init(struct drm_device *);
 extern void nv40_fb_takedown(struct drm_device *);
@@ -1035,12 +1032,6 @@ extern int  nv50_graph_unload_context(struct drm_device *);
 extern void nv50_graph_context_switch(struct drm_device *);
 extern int  nv50_grctx_init(struct nouveau_grctx *);
 
-/* nouveau_grctx.c */
-extern int  nouveau_grctx_prog_load(struct drm_device *);
-extern void nouveau_grctx_vals_load(struct drm_device *,
-				    struct nouveau_gpuobj *);
-extern void nouveau_grctx_fini(struct drm_device *);
-
 /* nv04_instmem.c */
 extern int  nv04_instmem_init(struct drm_device *);
 extern void nv04_instmem_takedown(struct drm_device *);
@@ -1051,8 +1042,7 @@ extern int  nv04_instmem_populate(struct drm_device *, struct nouveau_gpuobj *,
 extern void nv04_instmem_clear(struct drm_device *, struct nouveau_gpuobj *);
 extern int  nv04_instmem_bind(struct drm_device *, struct nouveau_gpuobj *);
 extern int  nv04_instmem_unbind(struct drm_device *, struct nouveau_gpuobj *);
-extern void nv04_instmem_prepare_access(struct drm_device *, bool write);
-extern void nv04_instmem_finish_access(struct drm_device *);
+extern void nv04_instmem_flush(struct drm_device *);
 
 /* nv50_instmem.c */
 extern int  nv50_instmem_init(struct drm_device *);
@@ -1064,8 +1054,9 @@ extern int  nv50_instmem_populate(struct drm_device *, struct nouveau_gpuobj *,
 extern void nv50_instmem_clear(struct drm_device *, struct nouveau_gpuobj *);
 extern int  nv50_instmem_bind(struct drm_device *, struct nouveau_gpuobj *);
 extern int  nv50_instmem_unbind(struct drm_device *, struct nouveau_gpuobj *);
-extern void nv50_instmem_prepare_access(struct drm_device *, bool write);
-extern void nv50_instmem_finish_access(struct drm_device *);
+extern void nv50_instmem_flush(struct drm_device *);
+extern void nv84_instmem_flush(struct drm_device *);
+extern void nv50_vm_flush(struct drm_device *, int engine);
 
 /* nv04_mc.c */
 extern int  nv04_mc_init(struct drm_device *);
@@ -1088,13 +1079,14 @@ extern long nouveau_compat_ioctl(struct file *file, unsigned int cmd,
 				 unsigned long arg);
 
 /* nv04_dac.c */
-extern int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry);
+extern int nv04_dac_create(struct drm_connector *, struct dcb_entry *);
 extern uint32_t nv17_dac_sample_load(struct drm_encoder *encoder);
 extern int nv04_dac_output_offset(struct drm_encoder *encoder);
 extern void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable);
+extern bool nv04_dac_in_use(struct drm_encoder *encoder);
 
 /* nv04_dfp.c */
-extern int nv04_dfp_create(struct drm_device *dev, struct dcb_entry *entry);
+extern int nv04_dfp_create(struct drm_connector *, struct dcb_entry *);
 extern int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_entry *dcbent);
 extern void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_entry *dcbent,
 			       int head, bool dl);
@@ -1103,15 +1095,17 @@ extern void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode);
 
 /* nv04_tv.c */
 extern int nv04_tv_identify(struct drm_device *dev, int i2c_index);
-extern int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry);
+extern int nv04_tv_create(struct drm_connector *, struct dcb_entry *);
 
 /* nv17_tv.c */
-extern int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry);
+extern int nv17_tv_create(struct drm_connector *, struct dcb_entry *);
 
 /* nv04_display.c */
+extern int nv04_display_early_init(struct drm_device *);
+extern void nv04_display_late_takedown(struct drm_device *);
 extern int nv04_display_create(struct drm_device *);
+extern int nv04_display_init(struct drm_device *);
 extern void nv04_display_destroy(struct drm_device *);
-extern void nv04_display_restore(struct drm_device *);
 
 /* nv04_crtc.c */
 extern int nv04_crtc_create(struct drm_device *, int index);
@@ -1147,7 +1141,6 @@ extern int nouveau_fence_wait(void *obj, void *arg, bool lazy, bool intr);
 extern int nouveau_fence_flush(void *obj, void *arg);
 extern void nouveau_fence_unref(void **obj);
 extern void *nouveau_fence_ref(void *obj);
-extern void nouveau_fence_handler(struct drm_device *dev, int channel);
 
 /* nouveau_gem.c */
 extern int nouveau_gem_new(struct drm_device *, struct nouveau_channel *,
@@ -1167,13 +1160,15 @@ extern int nouveau_gem_ioctl_cpu_fini(struct drm_device *, void *,
 extern int nouveau_gem_ioctl_info(struct drm_device *, void *,
 				  struct drm_file *);
 
-/* nv17_gpio.c */
-int nv17_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
-int nv17_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
+/* nv10_gpio.c */
+int nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
+int nv10_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
 
 /* nv50_gpio.c */
+int nv50_gpio_init(struct drm_device *dev);
 int nv50_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
 int nv50_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
+void nv50_gpio_irq_enable(struct drm_device *, enum dcb_gpio_tag, bool on);
 
 /* nv50_calc. */
 int nv50_calc_pll(struct drm_device *, struct pll_lims *, int clk,
@@ -1220,6 +1215,14 @@ static inline void nv_wr32(struct drm_device *dev, unsigned reg, u32 val)
 	iowrite32_native(val, dev_priv->mmio + reg);
 }
 
+static inline void nv_mask(struct drm_device *dev, u32 reg, u32 mask, u32 val)
+{
+	u32 tmp = nv_rd32(dev, reg);
+	tmp &= ~mask;
+	tmp |= val;
+	nv_wr32(dev, reg, tmp);
+}
+
 static inline u8 nv_rd08(struct drm_device *dev, unsigned reg)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/nouveau/nouveau_encoder.h b/drivers/gpu/drm/nouveau/nouveau_encoder.h
index e1df8209cd0..a1a0d48ae70 100644
--- a/drivers/gpu/drm/nouveau/nouveau_encoder.h
+++ b/drivers/gpu/drm/nouveau/nouveau_encoder.h
@@ -38,13 +38,15 @@ struct nouveau_encoder {
 	struct dcb_entry *dcb;
 	int or;
 
+	/* different to drm_encoder.crtc, this reflects what's
+	 * actually programmed on the hw, not the proposed crtc */
+	struct drm_crtc *crtc;
+
 	struct drm_display_mode mode;
 	int last_dpms;
 
 	struct nv04_output_reg restore;
 
-	void (*disconnect)(struct nouveau_encoder *encoder);
-
 	union {
 		struct {
 			int mc_unknown;
@@ -71,8 +73,8 @@ static inline struct drm_encoder *to_drm_encoder(struct nouveau_encoder *enc)
 
 struct nouveau_connector *
 nouveau_encoder_connector_get(struct nouveau_encoder *encoder);
-int nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry);
-int nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry);
+int nv50_sor_create(struct drm_connector *, struct dcb_entry *);
+int nv50_dac_create(struct drm_connector *, struct dcb_entry *);
 
 struct bit_displayport_encoder_table {
 	uint32_t match;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index 257ea130ae1..2fb2444d232 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -333,7 +333,7 @@ nouveau_fbcon_output_poll_changed(struct drm_device *dev)
 	drm_fb_helper_hotplug_event(&dev_priv->nfbdev->helper);
 }
 
-int
+static int
 nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev)
 {
 	struct nouveau_framebuffer *nouveau_fb = &nfbdev->nouveau_fb;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index faddf53ff9e..6b208ffafa8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -67,12 +67,13 @@ nouveau_fence_update(struct nouveau_channel *chan)
 	if (USE_REFCNT)
 		sequence = nvchan_rd32(chan, 0x48);
 	else
-		sequence = chan->fence.last_sequence_irq;
+		sequence = atomic_read(&chan->fence.last_sequence_irq);
 
 	if (chan->fence.sequence_ack == sequence)
 		return;
 	chan->fence.sequence_ack = sequence;
 
+	spin_lock(&chan->fence.lock);
 	list_for_each_safe(entry, tmp, &chan->fence.pending) {
 		fence = list_entry(entry, struct nouveau_fence, entry);
 
@@ -84,6 +85,7 @@ nouveau_fence_update(struct nouveau_channel *chan)
 		if (sequence == chan->fence.sequence_ack)
 			break;
 	}
+	spin_unlock(&chan->fence.lock);
 }
 
 int
@@ -119,7 +121,6 @@ nouveau_fence_emit(struct nouveau_fence *fence)
 {
 	struct drm_nouveau_private *dev_priv = fence->channel->dev->dev_private;
 	struct nouveau_channel *chan = fence->channel;
-	unsigned long flags;
 	int ret;
 
 	ret = RING_SPACE(chan, 2);
@@ -127,9 +128,7 @@ nouveau_fence_emit(struct nouveau_fence *fence)
 		return ret;
 
 	if (unlikely(chan->fence.sequence == chan->fence.sequence_ack - 1)) {
-		spin_lock_irqsave(&chan->fence.lock, flags);
 		nouveau_fence_update(chan);
-		spin_unlock_irqrestore(&chan->fence.lock, flags);
 
 		BUG_ON(chan->fence.sequence ==
 		       chan->fence.sequence_ack - 1);
@@ -138,9 +137,9 @@ nouveau_fence_emit(struct nouveau_fence *fence)
 	fence->sequence = ++chan->fence.sequence;
 
 	kref_get(&fence->refcount);
-	spin_lock_irqsave(&chan->fence.lock, flags);
+	spin_lock(&chan->fence.lock);
 	list_add_tail(&fence->entry, &chan->fence.pending);
-	spin_unlock_irqrestore(&chan->fence.lock, flags);
+	spin_unlock(&chan->fence.lock);
 
 	BEGIN_RING(chan, NvSubSw, USE_REFCNT ? 0x0050 : 0x0150, 1);
 	OUT_RING(chan, fence->sequence);
@@ -173,14 +172,11 @@ nouveau_fence_signalled(void *sync_obj, void *sync_arg)
 {
 	struct nouveau_fence *fence = nouveau_fence(sync_obj);
 	struct nouveau_channel *chan = fence->channel;
-	unsigned long flags;
 
 	if (fence->signalled)
 		return true;
 
-	spin_lock_irqsave(&chan->fence.lock, flags);
 	nouveau_fence_update(chan);
-	spin_unlock_irqrestore(&chan->fence.lock, flags);
 	return fence->signalled;
 }
 
@@ -190,8 +186,6 @@ nouveau_fence_wait(void *sync_obj, void *sync_arg, bool lazy, bool intr)
 	unsigned long timeout = jiffies + (3 * DRM_HZ);
 	int ret = 0;
 
-	__set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
-
 	while (1) {
 		if (nouveau_fence_signalled(sync_obj, sync_arg))
 			break;
@@ -201,6 +195,8 @@ nouveau_fence_wait(void *sync_obj, void *sync_arg, bool lazy, bool intr)
 			break;
 		}
 
+		__set_current_state(intr ? TASK_INTERRUPTIBLE
+			: TASK_UNINTERRUPTIBLE);
 		if (lazy)
 			schedule_timeout(1);
 
@@ -221,27 +217,12 @@ nouveau_fence_flush(void *sync_obj, void *sync_arg)
 	return 0;
 }
 
-void
-nouveau_fence_handler(struct drm_device *dev, int channel)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_channel *chan = NULL;
-
-	if (channel >= 0 && channel < dev_priv->engine.fifo.channels)
-		chan = dev_priv->fifos[channel];
-
-	if (chan) {
-		spin_lock_irq(&chan->fence.lock);
-		nouveau_fence_update(chan);
-		spin_unlock_irq(&chan->fence.lock);
-	}
-}
-
 int
 nouveau_fence_init(struct nouveau_channel *chan)
 {
 	INIT_LIST_HEAD(&chan->fence.pending);
 	spin_lock_init(&chan->fence.lock);
+	atomic_set(&chan->fence.last_sequence_irq, 0);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 69c76cf9340..547f2c24c1e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -137,8 +137,6 @@ nouveau_gem_ioctl_new(struct drm_device *dev, void *data,
 	uint32_t flags = 0;
 	int ret = 0;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	if (unlikely(dev_priv->ttm.bdev.dev_mapping == NULL))
 		dev_priv->ttm.bdev.dev_mapping = dev_priv->dev->dev_mapping;
 
@@ -577,10 +575,9 @@ nouveau_gem_ioctl_pushbuf(struct drm_device *dev, void *data,
 	struct drm_nouveau_gem_pushbuf_bo *bo;
 	struct nouveau_channel *chan;
 	struct validate_op op;
-	struct nouveau_fence *fence = 0;
+	struct nouveau_fence *fence = NULL;
 	int i, j, ret = 0, do_reloc = 0;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
 	NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(req->channel, file_priv, chan);
 
 	req->vram_available = dev_priv->fb_aper_free;
@@ -760,8 +757,6 @@ nouveau_gem_ioctl_cpu_prep(struct drm_device *dev, void *data,
 	bool no_wait = !!(req->flags & NOUVEAU_GEM_CPU_PREP_NOWAIT);
 	int ret = -EINVAL;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	gem = drm_gem_object_lookup(dev, file_priv, req->handle);
 	if (!gem)
 		return ret;
@@ -800,8 +795,6 @@ nouveau_gem_ioctl_cpu_fini(struct drm_device *dev, void *data,
 	struct nouveau_bo *nvbo;
 	int ret = -EINVAL;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	gem = drm_gem_object_lookup(dev, file_priv, req->handle);
 	if (!gem)
 		return ret;
@@ -827,8 +820,6 @@ nouveau_gem_ioctl_info(struct drm_device *dev, void *data,
 	struct drm_gem_object *gem;
 	int ret;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	gem = drm_gem_object_lookup(dev, file_priv, req->handle);
 	if (!gem)
 		return -EINVAL;
diff --git a/drivers/gpu/drm/nouveau/nouveau_grctx.c b/drivers/gpu/drm/nouveau/nouveau_grctx.c
deleted file mode 100644
index f731c5f6053..00000000000
--- a/drivers/gpu/drm/nouveau/nouveau_grctx.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright 2009 Red Hat Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: Ben Skeggs
- */
-
-#include <linux/firmware.h>
-#include <linux/slab.h>
-
-#include "drmP.h"
-#include "nouveau_drv.h"
-
-struct nouveau_ctxprog {
-	uint32_t signature;
-	uint8_t  version;
-	uint16_t length;
-	uint32_t data[];
-} __attribute__ ((packed));
-
-struct nouveau_ctxvals {
-	uint32_t signature;
-	uint8_t  version;
-	uint32_t length;
-	struct {
-		uint32_t offset;
-		uint32_t value;
-	} data[];
-} __attribute__ ((packed));
-
-int
-nouveau_grctx_prog_load(struct drm_device *dev)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
-	const int chipset = dev_priv->chipset;
-	const struct firmware *fw;
-	const struct nouveau_ctxprog *cp;
-	const struct nouveau_ctxvals *cv;
-	char name[32];
-	int ret, i;
-
-	if (pgraph->accel_blocked)
-		return -ENODEV;
-
-	if (!pgraph->ctxprog) {
-		sprintf(name, "nouveau/nv%02x.ctxprog", chipset);
-		ret = request_firmware(&fw, name, &dev->pdev->dev);
-		if (ret) {
-			NV_ERROR(dev, "No ctxprog for NV%02x\n", chipset);
-			return ret;
-		}
-
-		pgraph->ctxprog = kmemdup(fw->data, fw->size, GFP_KERNEL);
-		if (!pgraph->ctxprog) {
-			NV_ERROR(dev, "OOM copying ctxprog\n");
-			release_firmware(fw);
-			return -ENOMEM;
-		}
-
-		cp = pgraph->ctxprog;
-		if (le32_to_cpu(cp->signature) != 0x5043564e ||
-		    cp->version != 0 ||
-		    le16_to_cpu(cp->length) != ((fw->size - 7) / 4)) {
-			NV_ERROR(dev, "ctxprog invalid\n");
-			release_firmware(fw);
-			nouveau_grctx_fini(dev);
-			return -EINVAL;
-		}
-		release_firmware(fw);
-	}
-
-	if (!pgraph->ctxvals) {
-		sprintf(name, "nouveau/nv%02x.ctxvals", chipset);
-		ret = request_firmware(&fw, name, &dev->pdev->dev);
-		if (ret) {
-			NV_ERROR(dev, "No ctxvals for NV%02x\n", chipset);
-			nouveau_grctx_fini(dev);
-			return ret;
-		}
-
-		pgraph->ctxvals = kmemdup(fw->data, fw->size, GFP_KERNEL);
-		if (!pgraph->ctxvals) {
-			NV_ERROR(dev, "OOM copying ctxvals\n");
-			release_firmware(fw);
-			nouveau_grctx_fini(dev);
-			return -ENOMEM;
-		}
-
-		cv = (void *)pgraph->ctxvals;
-		if (le32_to_cpu(cv->signature) != 0x5643564e ||
-		    cv->version != 0 ||
-		    le32_to_cpu(cv->length) != ((fw->size - 9) / 8)) {
-			NV_ERROR(dev, "ctxvals invalid\n");
-			release_firmware(fw);
-			nouveau_grctx_fini(dev);
-			return -EINVAL;
-		}
-		release_firmware(fw);
-	}
-
-	cp = pgraph->ctxprog;
-
-	nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
-	for (i = 0; i < le16_to_cpu(cp->length); i++)
-		nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA,
-			le32_to_cpu(cp->data[i]));
-
-	return 0;
-}
-
-void
-nouveau_grctx_fini(struct drm_device *dev)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
-
-	if (pgraph->ctxprog) {
-		kfree(pgraph->ctxprog);
-		pgraph->ctxprog = NULL;
-	}
-
-	if (pgraph->ctxvals) {
-		kfree(pgraph->ctxprog);
-		pgraph->ctxvals = NULL;
-	}
-}
-
-void
-nouveau_grctx_vals_load(struct drm_device *dev, struct nouveau_gpuobj *ctx)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
-	struct nouveau_ctxvals *cv = pgraph->ctxvals;
-	int i;
-
-	if (!cv)
-		return;
-
-	for (i = 0; i < le32_to_cpu(cv->length); i++)
-		nv_wo32(dev, ctx, le32_to_cpu(cv->data[i].offset),
-			le32_to_cpu(cv->data[i].value));
-}
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index 316a3c7e6eb..cb0cb34440c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -278,3 +278,45 @@ nouveau_i2c_find(struct drm_device *dev, int index)
 	return i2c->chan;
 }
 
+bool
+nouveau_probe_i2c_addr(struct nouveau_i2c_chan *i2c, int addr)
+{
+	uint8_t buf[] = { 0 };
+	struct i2c_msg msgs[] = {
+		{
+			.addr = addr,
+			.flags = 0,
+			.len = 1,
+			.buf = buf,
+		},
+		{
+			.addr = addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = buf,
+		}
+	};
+
+	return i2c_transfer(&i2c->adapter, msgs, 2) == 2;
+}
+
+int
+nouveau_i2c_identify(struct drm_device *dev, const char *what,
+		     struct i2c_board_info *info, int index)
+{
+	struct nouveau_i2c_chan *i2c = nouveau_i2c_find(dev, index);
+	int i;
+
+	NV_DEBUG(dev, "Probing %ss on I2C bus: %d\n", what, index);
+
+	for (i = 0; info[i].addr; i++) {
+		if (nouveau_probe_i2c_addr(i2c, info[i].addr)) {
+			NV_INFO(dev, "Detected %s: %s\n", what, info[i].type);
+			return i;
+		}
+	}
+
+	NV_DEBUG(dev, "No devices found.\n");
+
+	return -ENODEV;
+}
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.h b/drivers/gpu/drm/nouveau/nouveau_i2c.h
index c8eaf7a9fcb..6dd2f8713cd 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.h
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.h
@@ -45,6 +45,9 @@ struct nouveau_i2c_chan {
 int nouveau_i2c_init(struct drm_device *, struct dcb_i2c_entry *, int index);
 void nouveau_i2c_fini(struct drm_device *, struct dcb_i2c_entry *);
 struct nouveau_i2c_chan *nouveau_i2c_find(struct drm_device *, int index);
+bool nouveau_probe_i2c_addr(struct nouveau_i2c_chan *i2c, int addr);
+int nouveau_i2c_identify(struct drm_device *dev, const char *what,
+			 struct i2c_board_info *info, int index);
 
 int nouveau_dp_i2c_aux_ch(struct i2c_adapter *, int mode, uint8_t write_byte,
 			  uint8_t *read_byte);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index c1fd42b0dad..a9f36ab256b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -35,162 +35,6 @@
 #include "drm_sarea.h"
 #include "nouveau_drv.h"
 
-static struct mem_block *
-split_block(struct mem_block *p, uint64_t start, uint64_t size,
-	    struct drm_file *file_priv)
-{
-	/* Maybe cut off the start of an existing block */
-	if (start > p->start) {
-		struct mem_block *newblock =
-			kmalloc(sizeof(*newblock), GFP_KERNEL);
-		if (!newblock)
-			goto out;
-		newblock->start = start;
-		newblock->size = p->size - (start - p->start);
-		newblock->file_priv = NULL;
-		newblock->next = p->next;
-		newblock->prev = p;
-		p->next->prev = newblock;
-		p->next = newblock;
-		p->size -= newblock->size;
-		p = newblock;
-	}
-
-	/* Maybe cut off the end of an existing block */
-	if (size < p->size) {
-		struct mem_block *newblock =
-			kmalloc(sizeof(*newblock), GFP_KERNEL);
-		if (!newblock)
-			goto out;
-		newblock->start = start + size;
-		newblock->size = p->size - size;
-		newblock->file_priv = NULL;
-		newblock->next = p->next;
-		newblock->prev = p;
-		p->next->prev = newblock;
-		p->next = newblock;
-		p->size = size;
-	}
-
-out:
-	/* Our block is in the middle */
-	p->file_priv = file_priv;
-	return p;
-}
-
-struct mem_block *
-nouveau_mem_alloc_block(struct mem_block *heap, uint64_t size,
-			int align2, struct drm_file *file_priv, int tail)
-{
-	struct mem_block *p;
-	uint64_t mask = (1 << align2) - 1;
-
-	if (!heap)
-		return NULL;
-
-	if (tail) {
-		list_for_each_prev(p, heap) {
-			uint64_t start = ((p->start + p->size) - size) & ~mask;
-
-			if (p->file_priv == NULL && start >= p->start &&
-			    start + size <= p->start + p->size)
-				return split_block(p, start, size, file_priv);
-		}
-	} else {
-		list_for_each(p, heap) {
-			uint64_t start = (p->start + mask) & ~mask;
-
-			if (p->file_priv == NULL &&
-			    start + size <= p->start + p->size)
-				return split_block(p, start, size, file_priv);
-		}
-	}
-
-	return NULL;
-}
-
-void nouveau_mem_free_block(struct mem_block *p)
-{
-	p->file_priv = NULL;
-
-	/* Assumes a single contiguous range.  Needs a special file_priv in
-	 * 'heap' to stop it being subsumed.
-	 */
-	if (p->next->file_priv == NULL) {
-		struct mem_block *q = p->next;
-		p->size += q->size;
-		p->next = q->next;
-		p->next->prev = p;
-		kfree(q);
-	}
-
-	if (p->prev->file_priv == NULL) {
-		struct mem_block *q = p->prev;
-		q->size += p->size;
-		q->next = p->next;
-		q->next->prev = q;
-		kfree(p);
-	}
-}
-
-/* Initialize.  How to check for an uninitialized heap?
- */
-int nouveau_mem_init_heap(struct mem_block **heap, uint64_t start,
-			  uint64_t size)
-{
-	struct mem_block *blocks = kmalloc(sizeof(*blocks), GFP_KERNEL);
-
-	if (!blocks)
-		return -ENOMEM;
-
-	*heap = kmalloc(sizeof(**heap), GFP_KERNEL);
-	if (!*heap) {
-		kfree(blocks);
-		return -ENOMEM;
-	}
-
-	blocks->start = start;
-	blocks->size = size;
-	blocks->file_priv = NULL;
-	blocks->next = blocks->prev = *heap;
-
-	memset(*heap, 0, sizeof(**heap));
-	(*heap)->file_priv = (struct drm_file *) -1;
-	(*heap)->next = (*heap)->prev = blocks;
-	return 0;
-}
-
-/*
- * Free all blocks associated with the releasing file_priv
- */
-void nouveau_mem_release(struct drm_file *file_priv, struct mem_block *heap)
-{
-	struct mem_block *p;
-
-	if (!heap || !heap->next)
-		return;
-
-	list_for_each(p, heap) {
-		if (p->file_priv == file_priv)
-			p->file_priv = NULL;
-	}
-
-	/* Assumes a single contiguous range.  Needs a special file_priv in
-	 * 'heap' to stop it being subsumed.
-	 */
-	list_for_each(p, heap) {
-		while ((p->file_priv == NULL) &&
-					(p->next->file_priv == NULL) &&
-					(p->next != heap)) {
-			struct mem_block *q = p->next;
-			p->size += q->size;
-			p->next = q->next;
-			p->next->prev = p;
-			kfree(q);
-		}
-	}
-}
-
 /*
  * NV10-NV40 tiling helpers
  */
@@ -299,7 +143,6 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size,
 		phys |= 0x30;
 	}
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (size) {
 		unsigned offset_h = upper_32_bits(phys);
 		unsigned offset_l = lower_32_bits(phys);
@@ -331,36 +174,12 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size,
 			}
 		}
 	}
-	dev_priv->engine.instmem.finish_access(dev);
-
-	nv_wr32(dev, 0x100c80, 0x00050001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
-
-	nv_wr32(dev, 0x100c80, 0x00000001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
-
-	nv_wr32(dev, 0x100c80, 0x00040001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
-
-	nv_wr32(dev, 0x100c80, 0x00060001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
+	dev_priv->engine.instmem.flush(dev);
 
+	nv50_vm_flush(dev, 5);
+	nv50_vm_flush(dev, 0);
+	nv50_vm_flush(dev, 4);
+	nv50_vm_flush(dev, 6);
 	return 0;
 }
 
@@ -374,7 +193,6 @@ nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 	virt -= dev_priv->vm_vram_base;
 	pages = (size >> 16) << 1;
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pages) {
 		pgt = dev_priv->vm_vram_pt[virt >> 29];
 		pte = (virt & 0x1ffe0000ULL) >> 15;
@@ -388,57 +206,19 @@ nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 		while (pte < end)
 			nv_wo32(dev, pgt, pte++, 0);
 	}
-	dev_priv->engine.instmem.finish_access(dev);
-
-	nv_wr32(dev, 0x100c80, 0x00050001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return;
-	}
-
-	nv_wr32(dev, 0x100c80, 0x00000001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return;
-	}
-
-	nv_wr32(dev, 0x100c80, 0x00040001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return;
-	}
+	dev_priv->engine.instmem.flush(dev);
 
-	nv_wr32(dev, 0x100c80, 0x00060001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-	}
+	nv50_vm_flush(dev, 5);
+	nv50_vm_flush(dev, 0);
+	nv50_vm_flush(dev, 4);
+	nv50_vm_flush(dev, 6);
 }
 
 /*
  * Cleanup everything
  */
-void nouveau_mem_takedown(struct mem_block **heap)
-{
-	struct mem_block *p;
-
-	if (!*heap)
-		return;
-
-	for (p = (*heap)->next; p != *heap;) {
-		struct mem_block *q = p;
-		p = p->next;
-		kfree(q);
-	}
-
-	kfree(*heap);
-	*heap = NULL;
-}
-
-void nouveau_mem_close(struct drm_device *dev)
+void
+nouveau_mem_close(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
@@ -449,8 +229,7 @@ void nouveau_mem_close(struct drm_device *dev)
 
 	nouveau_ttm_global_release(dev_priv);
 
-	if (drm_core_has_AGP(dev) && dev->agp &&
-	    drm_core_check_feature(dev, DRIVER_MODESET)) {
+	if (drm_core_has_AGP(dev) && dev->agp) {
 		struct drm_agp_mem *entry, *tempe;
 
 		/* Remove AGP resources, but leave dev->agp
@@ -471,28 +250,29 @@ void nouveau_mem_close(struct drm_device *dev)
 	}
 
 	if (dev_priv->fb_mtrr) {
-		drm_mtrr_del(dev_priv->fb_mtrr, drm_get_resource_start(dev, 1),
-			     drm_get_resource_len(dev, 1), DRM_MTRR_WC);
-		dev_priv->fb_mtrr = 0;
+		drm_mtrr_del(dev_priv->fb_mtrr,
+			     pci_resource_start(dev->pdev, 1),
+			     pci_resource_len(dev->pdev, 1), DRM_MTRR_WC);
+		dev_priv->fb_mtrr = -1;
 	}
 }
 
 static uint32_t
 nouveau_mem_detect_nv04(struct drm_device *dev)
 {
-	uint32_t boot0 = nv_rd32(dev, NV03_BOOT_0);
+	uint32_t boot0 = nv_rd32(dev, NV04_PFB_BOOT_0);
 
 	if (boot0 & 0x00000100)
 		return (((boot0 >> 12) & 0xf) * 2 + 2) * 1024 * 1024;
 
-	switch (boot0 & NV03_BOOT_0_RAM_AMOUNT) {
-	case NV04_BOOT_0_RAM_AMOUNT_32MB:
+	switch (boot0 & NV04_PFB_BOOT_0_RAM_AMOUNT) {
+	case NV04_PFB_BOOT_0_RAM_AMOUNT_32MB:
 		return 32 * 1024 * 1024;
-	case NV04_BOOT_0_RAM_AMOUNT_16MB:
+	case NV04_PFB_BOOT_0_RAM_AMOUNT_16MB:
 		return 16 * 1024 * 1024;
-	case NV04_BOOT_0_RAM_AMOUNT_8MB:
+	case NV04_PFB_BOOT_0_RAM_AMOUNT_8MB:
 		return 8 * 1024 * 1024;
-	case NV04_BOOT_0_RAM_AMOUNT_4MB:
+	case NV04_PFB_BOOT_0_RAM_AMOUNT_4MB:
 		return 4 * 1024 * 1024;
 	}
 
@@ -536,12 +316,18 @@ nouveau_mem_detect(struct drm_device *dev)
 	} else
 	if (dev_priv->flags & (NV_NFORCE | NV_NFORCE2)) {
 		dev_priv->vram_size = nouveau_mem_detect_nforce(dev);
+	} else
+	if (dev_priv->card_type < NV_50) {
+		dev_priv->vram_size  = nv_rd32(dev, NV04_PFB_FIFO_DATA);
+		dev_priv->vram_size &= NV10_PFB_FIFO_DATA_RAM_AMOUNT_MB_MASK;
 	} else {
-		dev_priv->vram_size  = nv_rd32(dev, NV04_FIFO_DATA);
-		dev_priv->vram_size &= NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK;
-		if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
+		dev_priv->vram_size = nv_rd32(dev, NV04_PFB_FIFO_DATA);
+		dev_priv->vram_size |= (dev_priv->vram_size & 0xff) << 32;
+		dev_priv->vram_size &= 0xffffffff00ll;
+		if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac) {
 			dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10);
 			dev_priv->vram_sys_base <<= 12;
+		}
 	}
 
 	NV_INFO(dev, "Detected %dMiB VRAM\n", (int)(dev_priv->vram_size >> 20));
@@ -555,18 +341,36 @@ nouveau_mem_detect(struct drm_device *dev)
 	return -ENOMEM;
 }
 
-#if __OS_HAS_AGP
-static void nouveau_mem_reset_agp(struct drm_device *dev)
+int
+nouveau_mem_reset_agp(struct drm_device *dev)
 {
-	uint32_t saved_pci_nv_1, saved_pci_nv_19, pmc_enable;
+#if __OS_HAS_AGP
+	uint32_t saved_pci_nv_1, pmc_enable;
+	int ret;
+
+	/* First of all, disable fast writes, otherwise if it's
+	 * already enabled in the AGP bridge and we disable the card's
+	 * AGP controller we might be locking ourselves out of it. */
+	if (dev->agp->acquired) {
+		struct drm_agp_info info;
+		struct drm_agp_mode mode;
+
+		ret = drm_agp_info(dev, &info);
+		if (ret)
+			return ret;
+
+		mode.mode = info.mode & ~0x10;
+		ret = drm_agp_enable(dev, mode);
+		if (ret)
+			return ret;
+	}
 
 	saved_pci_nv_1 = nv_rd32(dev, NV04_PBUS_PCI_NV_1);
-	saved_pci_nv_19 = nv_rd32(dev, NV04_PBUS_PCI_NV_19);
 
 	/* clear busmaster bit */
 	nv_wr32(dev, NV04_PBUS_PCI_NV_1, saved_pci_nv_1 & ~0x4);
-	/* clear SBA and AGP bits */
-	nv_wr32(dev, NV04_PBUS_PCI_NV_19, saved_pci_nv_19 & 0xfffff0ff);
+	/* disable AGP */
+	nv_wr32(dev, NV04_PBUS_PCI_NV_19, 0);
 
 	/* power cycle pgraph, if enabled */
 	pmc_enable = nv_rd32(dev, NV03_PMC_ENABLE);
@@ -578,11 +382,12 @@ static void nouveau_mem_reset_agp(struct drm_device *dev)
 	}
 
 	/* and restore (gives effect of resetting AGP) */
-	nv_wr32(dev, NV04_PBUS_PCI_NV_19, saved_pci_nv_19);
 	nv_wr32(dev, NV04_PBUS_PCI_NV_1, saved_pci_nv_1);
-}
 #endif
 
+	return 0;
+}
+
 int
 nouveau_mem_init_agp(struct drm_device *dev)
 {
@@ -592,11 +397,6 @@ nouveau_mem_init_agp(struct drm_device *dev)
 	struct drm_agp_mode mode;
 	int ret;
 
-	if (nouveau_noagp)
-		return 0;
-
-	nouveau_mem_reset_agp(dev);
-
 	if (!dev->agp->acquired) {
 		ret = drm_agp_acquire(dev);
 		if (ret) {
@@ -633,7 +433,7 @@ nouveau_mem_init(struct drm_device *dev)
 	struct ttm_bo_device *bdev = &dev_priv->ttm.bdev;
 	int ret, dma_bits = 32;
 
-	dev_priv->fb_phys = drm_get_resource_start(dev, 1);
+	dev_priv->fb_phys = pci_resource_start(dev->pdev, 1);
 	dev_priv->gart_info.type = NOUVEAU_GART_NONE;
 
 	if (dev_priv->card_type >= NV_50 &&
@@ -665,8 +465,9 @@ nouveau_mem_init(struct drm_device *dev)
 
 	dev_priv->fb_available_size = dev_priv->vram_size;
 	dev_priv->fb_mappable_pages = dev_priv->fb_available_size;
-	if (dev_priv->fb_mappable_pages > drm_get_resource_len(dev, 1))
-		dev_priv->fb_mappable_pages = drm_get_resource_len(dev, 1);
+	if (dev_priv->fb_mappable_pages > pci_resource_len(dev->pdev, 1))
+		dev_priv->fb_mappable_pages =
+			pci_resource_len(dev->pdev, 1);
 	dev_priv->fb_mappable_pages >>= PAGE_SHIFT;
 
 	/* remove reserved space at end of vram from available amount */
@@ -692,7 +493,8 @@ nouveau_mem_init(struct drm_device *dev)
 
 	/* GART */
 #if !defined(__powerpc__) && !defined(__ia64__)
-	if (drm_device_is_agp(dev) && dev->agp) {
+	if (drm_device_is_agp(dev) && dev->agp && !nouveau_noagp) {
+		nouveau_mem_reset_agp(dev);
 		ret = nouveau_mem_init_agp(dev);
 		if (ret)
 			NV_ERROR(dev, "Error initialising AGP: %d\n", ret);
@@ -718,8 +520,8 @@ nouveau_mem_init(struct drm_device *dev)
 		return ret;
 	}
 
-	dev_priv->fb_mtrr = drm_mtrr_add(drm_get_resource_start(dev, 1),
-					 drm_get_resource_len(dev, 1),
+	dev_priv->fb_mtrr = drm_mtrr_add(pci_resource_start(dev->pdev, 1),
+					 pci_resource_len(dev->pdev, 1),
 					 DRM_MTRR_WC);
 
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 9537f3e3011..3ec181ff50c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -55,7 +55,7 @@ nouveau_notifier_init_channel(struct nouveau_channel *chan)
 	if (ret)
 		goto out_err;
 
-	ret = nouveau_mem_init_heap(&chan->notifier_heap, 0, ntfy->bo.mem.size);
+	ret = drm_mm_init(&chan->notifier_heap, 0, ntfy->bo.mem.size);
 	if (ret)
 		goto out_err;
 
@@ -80,7 +80,7 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan)
 	nouveau_bo_unpin(chan->notifier_bo);
 	mutex_unlock(&dev->struct_mutex);
 	drm_gem_object_unreference_unlocked(chan->notifier_bo->gem);
-	nouveau_mem_takedown(&chan->notifier_heap);
+	drm_mm_takedown(&chan->notifier_heap);
 }
 
 static void
@@ -90,7 +90,7 @@ nouveau_notifier_gpuobj_dtor(struct drm_device *dev,
 	NV_DEBUG(dev, "\n");
 
 	if (gpuobj->priv)
-		nouveau_mem_free_block(gpuobj->priv);
+		drm_mm_put_block(gpuobj->priv);
 }
 
 int
@@ -100,18 +100,13 @@ nouveau_notifier_alloc(struct nouveau_channel *chan, uint32_t handle,
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_gpuobj *nobj = NULL;
-	struct mem_block *mem;
+	struct drm_mm_node *mem;
 	uint32_t offset;
 	int target, ret;
 
-	if (!chan->notifier_heap) {
-		NV_ERROR(dev, "Channel %d doesn't have a notifier heap!\n",
-			 chan->id);
-		return -EINVAL;
-	}
-
-	mem = nouveau_mem_alloc_block(chan->notifier_heap, size, 0,
-				      (struct drm_file *)-2, 0);
+	mem = drm_mm_search_free(&chan->notifier_heap, size, 0, 0);
+	if (mem)
+		mem = drm_mm_get_block(mem, size, 0);
 	if (!mem) {
 		NV_ERROR(dev, "Channel %d notifier block full\n", chan->id);
 		return -ENOMEM;
@@ -144,17 +139,17 @@ nouveau_notifier_alloc(struct nouveau_channel *chan, uint32_t handle,
 				     mem->size, NV_DMA_ACCESS_RW, target,
 				     &nobj);
 	if (ret) {
-		nouveau_mem_free_block(mem);
+		drm_mm_put_block(mem);
 		NV_ERROR(dev, "Error creating notifier ctxdma: %d\n", ret);
 		return ret;
 	}
-	nobj->dtor   = nouveau_notifier_gpuobj_dtor;
-	nobj->priv   = mem;
+	nobj->dtor = nouveau_notifier_gpuobj_dtor;
+	nobj->priv = mem;
 
 	ret = nouveau_gpuobj_ref_add(dev, chan, handle, nobj, NULL);
 	if (ret) {
 		nouveau_gpuobj_del(dev, &nobj);
-		nouveau_mem_free_block(mem);
+		drm_mm_put_block(mem);
 		NV_ERROR(dev, "Error referencing notifier ctxdma: %d\n", ret);
 		return ret;
 	}
@@ -170,7 +165,7 @@ nouveau_notifier_offset(struct nouveau_gpuobj *nobj, uint32_t *poffset)
 		return -EINVAL;
 
 	if (poffset) {
-		struct mem_block *mem = nobj->priv;
+		struct drm_mm_node *mem = nobj->priv;
 
 		if (*poffset >= mem->size)
 			return false;
@@ -189,7 +184,6 @@ nouveau_ioctl_notifier_alloc(struct drm_device *dev, void *data,
 	struct nouveau_channel *chan;
 	int ret;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
 	NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(na->channel, file_priv, chan);
 
 	ret = nouveau_notifier_alloc(chan, na->handle, na->size, &na->offset);
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index e7c100ba63a..b6bcb254f4a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -132,7 +132,6 @@ nouveau_ramht_insert(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 		}
 	}
 
-	instmem->prepare_access(dev, true);
 	co = ho = nouveau_ramht_hash_handle(dev, chan->id, ref->handle);
 	do {
 		if (!nouveau_ramht_entry_valid(dev, ramht, co)) {
@@ -143,7 +142,7 @@ nouveau_ramht_insert(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 			nv_wo32(dev, ramht, (co + 4)/4, ctx);
 
 			list_add_tail(&ref->list, &chan->ramht_refs);
-			instmem->finish_access(dev);
+			instmem->flush(dev);
 			return 0;
 		}
 		NV_DEBUG(dev, "collision ch%d 0x%08x: h=0x%08x\n",
@@ -153,7 +152,6 @@ nouveau_ramht_insert(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 		if (co >= dev_priv->ramht_size)
 			co = 0;
 	} while (co != ho);
-	instmem->finish_access(dev);
 
 	NV_ERROR(dev, "RAMHT space exhausted. ch=%d\n", chan->id);
 	return -ENOMEM;
@@ -173,7 +171,6 @@ nouveau_ramht_remove(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 		return;
 	}
 
-	instmem->prepare_access(dev, true);
 	co = ho = nouveau_ramht_hash_handle(dev, chan->id, ref->handle);
 	do {
 		if (nouveau_ramht_entry_valid(dev, ramht, co) &&
@@ -186,7 +183,7 @@ nouveau_ramht_remove(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 			nv_wo32(dev, ramht, (co + 4)/4, 0x00000000);
 
 			list_del(&ref->list);
-			instmem->finish_access(dev);
+			instmem->flush(dev);
 			return;
 		}
 
@@ -195,7 +192,6 @@ nouveau_ramht_remove(struct drm_device *dev, struct nouveau_gpuobj_ref *ref)
 			co = 0;
 	} while (co != ho);
 	list_del(&ref->list);
-	instmem->finish_access(dev);
 
 	NV_ERROR(dev, "RAMHT entry not found. ch=%d, handle=0x%08x\n",
 		 chan->id, ref->handle);
@@ -209,7 +205,7 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_engine *engine = &dev_priv->engine;
 	struct nouveau_gpuobj *gpuobj;
-	struct mem_block *pramin = NULL;
+	struct drm_mm *pramin = NULL;
 	int ret;
 
 	NV_DEBUG(dev, "ch%d size=%u align=%d flags=0x%08x\n",
@@ -233,25 +229,12 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 	 * available.
 	 */
 	if (chan) {
-		if (chan->ramin_heap) {
-			NV_DEBUG(dev, "private heap\n");
-			pramin = chan->ramin_heap;
-		} else
-		if (dev_priv->card_type < NV_50) {
-			NV_DEBUG(dev, "global heap fallback\n");
-			pramin = dev_priv->ramin_heap;
-		}
+		NV_DEBUG(dev, "channel heap\n");
+		pramin = &chan->ramin_heap;
 	} else {
 		NV_DEBUG(dev, "global heap\n");
-		pramin = dev_priv->ramin_heap;
-	}
-
-	if (!pramin) {
-		NV_ERROR(dev, "No PRAMIN heap!\n");
-		return -EINVAL;
-	}
+		pramin = &dev_priv->ramin_heap;
 
-	if (!chan) {
 		ret = engine->instmem.populate(dev, gpuobj, &size);
 		if (ret) {
 			nouveau_gpuobj_del(dev, &gpuobj);
@@ -260,9 +243,10 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 	}
 
 	/* Allocate a chunk of the PRAMIN aperture */
-	gpuobj->im_pramin = nouveau_mem_alloc_block(pramin, size,
-						    drm_order(align),
-						    (struct drm_file *)-2, 0);
+	gpuobj->im_pramin = drm_mm_search_free(pramin, size, align, 0);
+	if (gpuobj->im_pramin)
+		gpuobj->im_pramin = drm_mm_get_block(gpuobj->im_pramin, size, align);
+
 	if (!gpuobj->im_pramin) {
 		nouveau_gpuobj_del(dev, &gpuobj);
 		return -ENOMEM;
@@ -279,10 +263,9 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 	if (gpuobj->flags & NVOBJ_FLAG_ZERO_ALLOC) {
 		int i;
 
-		engine->instmem.prepare_access(dev, true);
 		for (i = 0; i < gpuobj->im_pramin->size; i += 4)
 			nv_wo32(dev, gpuobj, i/4, 0);
-		engine->instmem.finish_access(dev);
+		engine->instmem.flush(dev);
 	}
 
 	*gpuobj_ret = gpuobj;
@@ -370,10 +353,9 @@ nouveau_gpuobj_del(struct drm_device *dev, struct nouveau_gpuobj **pgpuobj)
 	}
 
 	if (gpuobj->im_pramin && (gpuobj->flags & NVOBJ_FLAG_ZERO_FREE)) {
-		engine->instmem.prepare_access(dev, true);
 		for (i = 0; i < gpuobj->im_pramin->size; i += 4)
 			nv_wo32(dev, gpuobj, i/4, 0);
-		engine->instmem.finish_access(dev);
+		engine->instmem.flush(dev);
 	}
 
 	if (gpuobj->dtor)
@@ -386,7 +368,7 @@ nouveau_gpuobj_del(struct drm_device *dev, struct nouveau_gpuobj **pgpuobj)
 		if (gpuobj->flags & NVOBJ_FLAG_FAKE)
 			kfree(gpuobj->im_pramin);
 		else
-			nouveau_mem_free_block(gpuobj->im_pramin);
+			drm_mm_put_block(gpuobj->im_pramin);
 	}
 
 	list_del(&gpuobj->list);
@@ -589,7 +571,7 @@ nouveau_gpuobj_new_fake(struct drm_device *dev, uint32_t p_offset,
 	list_add_tail(&gpuobj->list, &dev_priv->gpuobj_list);
 
 	if (p_offset != ~0) {
-		gpuobj->im_pramin = kzalloc(sizeof(struct mem_block),
+		gpuobj->im_pramin = kzalloc(sizeof(struct drm_mm_node),
 					    GFP_KERNEL);
 		if (!gpuobj->im_pramin) {
 			nouveau_gpuobj_del(dev, &gpuobj);
@@ -605,10 +587,9 @@ nouveau_gpuobj_new_fake(struct drm_device *dev, uint32_t p_offset,
 	}
 
 	if (gpuobj->flags & NVOBJ_FLAG_ZERO_ALLOC) {
-		dev_priv->engine.instmem.prepare_access(dev, true);
 		for (i = 0; i < gpuobj->im_pramin->size; i += 4)
 			nv_wo32(dev, gpuobj, i/4, 0);
-		dev_priv->engine.instmem.finish_access(dev);
+		dev_priv->engine.instmem.flush(dev);
 	}
 
 	if (pref) {
@@ -696,8 +677,6 @@ nouveau_gpuobj_dma_new(struct nouveau_channel *chan, int class,
 		return ret;
 	}
 
-	instmem->prepare_access(dev, true);
-
 	if (dev_priv->card_type < NV_50) {
 		uint32_t frame, adjust, pte_flags = 0;
 
@@ -734,7 +713,7 @@ nouveau_gpuobj_dma_new(struct nouveau_channel *chan, int class,
 		nv_wo32(dev, *gpuobj, 5, flags5);
 	}
 
-	instmem->finish_access(dev);
+	instmem->flush(dev);
 
 	(*gpuobj)->engine = NVOBJ_ENGINE_SW;
 	(*gpuobj)->class  = class;
@@ -849,7 +828,6 @@ nouveau_gpuobj_gr_new(struct nouveau_channel *chan, int class,
 		return ret;
 	}
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	if (dev_priv->card_type >= NV_50) {
 		nv_wo32(dev, *gpuobj, 0, class);
 		nv_wo32(dev, *gpuobj, 5, 0x00010000);
@@ -874,7 +852,7 @@ nouveau_gpuobj_gr_new(struct nouveau_channel *chan, int class,
 			}
 		}
 	}
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	(*gpuobj)->engine = NVOBJ_ENGINE_GR;
 	(*gpuobj)->class  = class;
@@ -920,6 +898,7 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan)
 	base = 0;
 
 	/* PGRAPH context */
+	size += dev_priv->engine.graph.grctx_size;
 
 	if (dev_priv->card_type == NV_50) {
 		/* Various fixed table thingos */
@@ -930,12 +909,8 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan)
 		size += 0x8000;
 		/* RAMFC */
 		size += 0x1000;
-		/* PGRAPH context */
-		size += 0x70000;
 	}
 
-	NV_DEBUG(dev, "ch%d PRAMIN size: 0x%08x bytes, base alloc=0x%08x\n",
-		 chan->id, size, base);
 	ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0, size, 0x1000, 0,
 				     &chan->ramin);
 	if (ret) {
@@ -944,8 +919,7 @@ nouveau_gpuobj_channel_init_pramin(struct nouveau_channel *chan)
 	}
 	pramin = chan->ramin->gpuobj;
 
-	ret = nouveau_mem_init_heap(&chan->ramin_heap,
-				    pramin->im_pramin->start + base, size);
+	ret = drm_mm_init(&chan->ramin_heap, pramin->im_pramin->start + base, size);
 	if (ret) {
 		NV_ERROR(dev, "Error creating PRAMIN heap: %d\n", ret);
 		nouveau_gpuobj_ref_del(dev, &chan->ramin);
@@ -969,15 +943,11 @@ nouveau_gpuobj_channel_init(struct nouveau_channel *chan,
 
 	NV_DEBUG(dev, "ch%d vram=0x%08x tt=0x%08x\n", chan->id, vram_h, tt_h);
 
-	/* Reserve a block of PRAMIN for the channel
-	 *XXX: maybe on <NV50 too at some point
-	 */
-	if (0 || dev_priv->card_type == NV_50) {
-		ret = nouveau_gpuobj_channel_init_pramin(chan);
-		if (ret) {
-			NV_ERROR(dev, "init pramin\n");
-			return ret;
-		}
+	/* Allocate a chunk of memory for per-channel object storage */
+	ret = nouveau_gpuobj_channel_init_pramin(chan);
+	if (ret) {
+		NV_ERROR(dev, "init pramin\n");
+		return ret;
 	}
 
 	/* NV50 VM
@@ -988,17 +958,13 @@ nouveau_gpuobj_channel_init(struct nouveau_channel *chan,
 	if (dev_priv->card_type >= NV_50) {
 		uint32_t vm_offset, pde;
 
-		instmem->prepare_access(dev, true);
-
 		vm_offset = (dev_priv->chipset & 0xf0) == 0x50 ? 0x1400 : 0x200;
 		vm_offset += chan->ramin->gpuobj->im_pramin->start;
 
 		ret = nouveau_gpuobj_new_fake(dev, vm_offset, ~0, 0x4000,
 							0, &chan->vm_pd, NULL);
-		if (ret) {
-			instmem->finish_access(dev);
+		if (ret)
 			return ret;
-		}
 		for (i = 0; i < 0x4000; i += 8) {
 			nv_wo32(dev, chan->vm_pd, (i+0)/4, 0x00000000);
 			nv_wo32(dev, chan->vm_pd, (i+4)/4, 0xdeadcafe);
@@ -1008,10 +974,8 @@ nouveau_gpuobj_channel_init(struct nouveau_channel *chan,
 		ret = nouveau_gpuobj_ref_add(dev, NULL, 0,
 					     dev_priv->gart_info.sg_ctxdma,
 					     &chan->vm_gart_pt);
-		if (ret) {
-			instmem->finish_access(dev);
+		if (ret)
 			return ret;
-		}
 		nv_wo32(dev, chan->vm_pd, pde++,
 			    chan->vm_gart_pt->instance | 0x03);
 		nv_wo32(dev, chan->vm_pd, pde++, 0x00000000);
@@ -1021,17 +985,15 @@ nouveau_gpuobj_channel_init(struct nouveau_channel *chan,
 			ret = nouveau_gpuobj_ref_add(dev, NULL, 0,
 						     dev_priv->vm_vram_pt[i],
 						     &chan->vm_vram_pt[i]);
-			if (ret) {
-				instmem->finish_access(dev);
+			if (ret)
 				return ret;
-			}
 
 			nv_wo32(dev, chan->vm_pd, pde++,
 				    chan->vm_vram_pt[i]->instance | 0x61);
 			nv_wo32(dev, chan->vm_pd, pde++, 0x00000000);
 		}
 
-		instmem->finish_access(dev);
+		instmem->flush(dev);
 	}
 
 	/* RAMHT */
@@ -1130,8 +1092,8 @@ nouveau_gpuobj_channel_takedown(struct nouveau_channel *chan)
 	for (i = 0; i < dev_priv->vm_vram_pt_nr; i++)
 		nouveau_gpuobj_ref_del(dev, &chan->vm_vram_pt[i]);
 
-	if (chan->ramin_heap)
-		nouveau_mem_takedown(&chan->ramin_heap);
+	if (chan->ramin_heap.free_stack.next)
+		drm_mm_takedown(&chan->ramin_heap);
 	if (chan->ramin)
 		nouveau_gpuobj_ref_del(dev, &chan->ramin);
 
@@ -1164,10 +1126,8 @@ nouveau_gpuobj_suspend(struct drm_device *dev)
 			return -ENOMEM;
 		}
 
-		dev_priv->engine.instmem.prepare_access(dev, false);
 		for (i = 0; i < gpuobj->im_pramin->size / 4; i++)
 			gpuobj->im_backing_suspend[i] = nv_ro32(dev, gpuobj, i);
-		dev_priv->engine.instmem.finish_access(dev);
 	}
 
 	return 0;
@@ -1212,10 +1172,9 @@ nouveau_gpuobj_resume(struct drm_device *dev)
 		if (!gpuobj->im_backing_suspend)
 			continue;
 
-		dev_priv->engine.instmem.prepare_access(dev, true);
 		for (i = 0; i < gpuobj->im_pramin->size / 4; i++)
 			nv_wo32(dev, gpuobj, i, gpuobj->im_backing_suspend[i]);
-		dev_priv->engine.instmem.finish_access(dev);
+		dev_priv->engine.instmem.flush(dev);
 	}
 
 	nouveau_gpuobj_suspend_cleanup(dev);
@@ -1232,7 +1191,6 @@ int nouveau_ioctl_grobj_alloc(struct drm_device *dev, void *data,
 	struct nouveau_channel *chan;
 	int ret;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
 	NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(init->channel, file_priv, chan);
 
 	if (init->handle == ~0)
@@ -1283,7 +1241,6 @@ int nouveau_ioctl_gpuobj_free(struct drm_device *dev, void *data,
 	struct nouveau_channel *chan;
 	int ret;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
 	NOUVEAU_GET_USER_CHANNEL_WITH_RETURN(objfree->channel, file_priv, chan);
 
 	ret = nouveau_gpuobj_ref_find(chan, objfree->handle, &ref);
diff --git a/drivers/gpu/drm/nouveau/nouveau_reg.h b/drivers/gpu/drm/nouveau/nouveau_reg.h
index 6ca80a3fe70..9c1056cb8a9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_reg.h
+++ b/drivers/gpu/drm/nouveau/nouveau_reg.h
@@ -1,19 +1,64 @@
 
+#define NV04_PFB_BOOT_0						0x00100000
+#	define NV04_PFB_BOOT_0_RAM_AMOUNT			0x00000003
+#	define NV04_PFB_BOOT_0_RAM_AMOUNT_32MB			0x00000000
+#	define NV04_PFB_BOOT_0_RAM_AMOUNT_4MB			0x00000001
+#	define NV04_PFB_BOOT_0_RAM_AMOUNT_8MB			0x00000002
+#	define NV04_PFB_BOOT_0_RAM_AMOUNT_16MB			0x00000003
+#	define NV04_PFB_BOOT_0_RAM_WIDTH_128			0x00000004
+#	define NV04_PFB_BOOT_0_RAM_TYPE				0x00000028
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_8MBIT		0x00000000
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT		0x00000008
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SGRAM_16MBIT_4BANK	0x00000010
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_16MBIT		0x00000018
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_64MBIT		0x00000020
+#	define NV04_PFB_BOOT_0_RAM_TYPE_SDRAM_64MBITX16		0x00000028
+#	define NV04_PFB_BOOT_0_UMA_ENABLE			0x00000100
+#	define NV04_PFB_BOOT_0_UMA_SIZE				0x0000f000
+#define NV04_PFB_DEBUG_0					0x00100080
+#	define NV04_PFB_DEBUG_0_PAGE_MODE			0x00000001
+#	define NV04_PFB_DEBUG_0_REFRESH_OFF			0x00000010
+#	define NV04_PFB_DEBUG_0_REFRESH_COUNTX64		0x00003f00
+#	define NV04_PFB_DEBUG_0_REFRESH_SLOW_CLK		0x00004000
+#	define NV04_PFB_DEBUG_0_SAFE_MODE			0x00008000
+#	define NV04_PFB_DEBUG_0_ALOM_ENABLE			0x00010000
+#	define NV04_PFB_DEBUG_0_CASOE				0x00100000
+#	define NV04_PFB_DEBUG_0_CKE_INVERT			0x10000000
+#	define NV04_PFB_DEBUG_0_REFINC				0x20000000
+#	define NV04_PFB_DEBUG_0_SAVE_POWER_OFF			0x40000000
+#define NV04_PFB_CFG0						0x00100200
+#	define NV04_PFB_CFG0_SCRAMBLE				0x20000000
+#define NV04_PFB_CFG1						0x00100204
+#define NV04_PFB_FIFO_DATA					0x0010020c
+#	define NV10_PFB_FIFO_DATA_RAM_AMOUNT_MB_MASK		0xfff00000
+#	define NV10_PFB_FIFO_DATA_RAM_AMOUNT_MB_SHIFT		20
+#define NV10_PFB_REFCTRL					0x00100210
+#	define NV10_PFB_REFCTRL_VALID_1				(1 << 31)
+#define NV04_PFB_PAD						0x0010021c
+#	define NV04_PFB_PAD_CKE_NORMAL				(1 << 0)
+#define NV10_PFB_TILE(i)                              (0x00100240 + (i*16))
+#define NV10_PFB_TILE__SIZE					8
+#define NV10_PFB_TLIMIT(i)                            (0x00100244 + (i*16))
+#define NV10_PFB_TSIZE(i)                             (0x00100248 + (i*16))
+#define NV10_PFB_TSTATUS(i)                           (0x0010024c + (i*16))
+#define NV04_PFB_REF						0x001002d0
+#	define NV04_PFB_REF_CMD_REFRESH				(1 << 0)
+#define NV04_PFB_PRE						0x001002d4
+#	define NV04_PFB_PRE_CMD_PRECHARGE			(1 << 0)
+#define NV10_PFB_CLOSE_PAGE2					0x0010033c
+#define NV04_PFB_SCRAMBLE(i)                         (0x00100400 + 4 * (i))
+#define NV40_PFB_TILE(i)                              (0x00100600 + (i*16))
+#define NV40_PFB_TILE__SIZE_0					12
+#define NV40_PFB_TILE__SIZE_1					15
+#define NV40_PFB_TLIMIT(i)                            (0x00100604 + (i*16))
+#define NV40_PFB_TSIZE(i)                             (0x00100608 + (i*16))
+#define NV40_PFB_TSTATUS(i)                           (0x0010060c + (i*16))
+#define NV40_PFB_UNK_800					0x00100800
 
-#define NV03_BOOT_0                                        0x00100000
-#    define NV03_BOOT_0_RAM_AMOUNT                         0x00000003
-#    define NV03_BOOT_0_RAM_AMOUNT_8MB                     0x00000000
-#    define NV03_BOOT_0_RAM_AMOUNT_2MB                     0x00000001
-#    define NV03_BOOT_0_RAM_AMOUNT_4MB                     0x00000002
-#    define NV03_BOOT_0_RAM_AMOUNT_8MB_SDRAM               0x00000003
-#    define NV04_BOOT_0_RAM_AMOUNT_32MB                    0x00000000
-#    define NV04_BOOT_0_RAM_AMOUNT_4MB                     0x00000001
-#    define NV04_BOOT_0_RAM_AMOUNT_8MB                     0x00000002
-#    define NV04_BOOT_0_RAM_AMOUNT_16MB                    0x00000003
-
-#define NV04_FIFO_DATA                                     0x0010020c
-#    define NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK              0xfff00000
-#    define NV10_FIFO_DATA_RAM_AMOUNT_MB_SHIFT             20
+#define NV_PEXTDEV_BOOT_0					0x00101000
+#define NV_PEXTDEV_BOOT_0_RAMCFG				0x0000003c
+#	define NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT		(8 << 12)
+#define NV_PEXTDEV_BOOT_3					0x0010100c
 
 #define NV_RAMIN                                           0x00700000
 
@@ -131,23 +176,6 @@
 #define NV04_PTIMER_TIME_1                                 0x00009410
 #define NV04_PTIMER_ALARM_0                                0x00009420
 
-#define NV04_PFB_CFG0                                      0x00100200
-#define NV04_PFB_CFG1                                      0x00100204
-#define NV40_PFB_020C                                      0x0010020C
-#define NV10_PFB_TILE(i)                                   (0x00100240 + (i*16))
-#define NV10_PFB_TILE__SIZE                                8
-#define NV10_PFB_TLIMIT(i)                                 (0x00100244 + (i*16))
-#define NV10_PFB_TSIZE(i)                                  (0x00100248 + (i*16))
-#define NV10_PFB_TSTATUS(i)                                (0x0010024C + (i*16))
-#define NV10_PFB_CLOSE_PAGE2                               0x0010033C
-#define NV40_PFB_TILE(i)                                   (0x00100600 + (i*16))
-#define NV40_PFB_TILE__SIZE_0                              12
-#define NV40_PFB_TILE__SIZE_1                              15
-#define NV40_PFB_TLIMIT(i)                                 (0x00100604 + (i*16))
-#define NV40_PFB_TSIZE(i)                                  (0x00100608 + (i*16))
-#define NV40_PFB_TSTATUS(i)                                (0x0010060C + (i*16))
-#define NV40_PFB_UNK_800					0x00100800
-
 #define NV04_PGRAPH_DEBUG_0                                0x00400080
 #define NV04_PGRAPH_DEBUG_1                                0x00400084
 #define NV04_PGRAPH_DEBUG_2                                0x00400088
@@ -814,6 +842,7 @@
 #define NV50_PDISPLAY_SOR_BACKLIGHT_ENABLE                           0x80000000
 #define NV50_PDISPLAY_SOR_BACKLIGHT_LEVEL                            0x00000fff
 #define NV50_SOR_DP_CTRL(i,l)            (0x0061c10c + (i) * 0x800 + (l) * 0x80)
+#define NV50_SOR_DP_CTRL_ENABLED                                     0x00000001
 #define NV50_SOR_DP_CTRL_ENHANCED_FRAME_ENABLED                      0x00004000
 #define NV50_SOR_DP_CTRL_LANE_MASK                                   0x001f0000
 #define NV50_SOR_DP_CTRL_LANE_0_ENABLED                              0x00010000
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 1d6ee8b5515..491767fe4fc 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -97,7 +97,6 @@ nouveau_sgdma_bind(struct ttm_backend *be, struct ttm_mem_reg *mem)
 
 	NV_DEBUG(dev, "pg=0x%lx\n", mem->mm_node->start);
 
-	dev_priv->engine.instmem.prepare_access(nvbe->dev, true);
 	pte = nouveau_sgdma_pte(nvbe->dev, mem->mm_node->start << PAGE_SHIFT);
 	nvbe->pte_start = pte;
 	for (i = 0; i < nvbe->nr_pages; i++) {
@@ -116,24 +115,11 @@ nouveau_sgdma_bind(struct ttm_backend *be, struct ttm_mem_reg *mem)
 			dma_offset += NV_CTXDMA_PAGE_SIZE;
 		}
 	}
-	dev_priv->engine.instmem.finish_access(nvbe->dev);
+	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv_wr32(dev, 0x100c80, 0x00050001);
-		if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-			NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-			NV_ERROR(dev, "0x100c80 = 0x%08x\n",
-						nv_rd32(dev, 0x100c80));
-			return -EBUSY;
-		}
-
-		nv_wr32(dev, 0x100c80, 0x00000001);
-		if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-			NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-			NV_ERROR(dev, "0x100c80 = 0x%08x\n",
-						nv_rd32(dev, 0x100c80));
-			return -EBUSY;
-		}
+		nv50_vm_flush(dev, 5); /* PGRAPH */
+		nv50_vm_flush(dev, 0); /* PFIFO */
 	}
 
 	nvbe->bound = true;
@@ -154,7 +140,6 @@ nouveau_sgdma_unbind(struct ttm_backend *be)
 	if (!nvbe->bound)
 		return 0;
 
-	dev_priv->engine.instmem.prepare_access(nvbe->dev, true);
 	pte = nvbe->pte_start;
 	for (i = 0; i < nvbe->nr_pages; i++) {
 		dma_addr_t dma_offset = dev_priv->gart_info.sg_dummy_bus;
@@ -170,24 +155,11 @@ nouveau_sgdma_unbind(struct ttm_backend *be)
 			dma_offset += NV_CTXDMA_PAGE_SIZE;
 		}
 	}
-	dev_priv->engine.instmem.finish_access(nvbe->dev);
+	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv_wr32(dev, 0x100c80, 0x00050001);
-		if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-			NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-			NV_ERROR(dev, "0x100c80 = 0x%08x\n",
-						nv_rd32(dev, 0x100c80));
-			return -EBUSY;
-		}
-
-		nv_wr32(dev, 0x100c80, 0x00000001);
-		if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-			NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-			NV_ERROR(dev, "0x100c80 = 0x%08x\n",
-						nv_rd32(dev, 0x100c80));
-			return -EBUSY;
-		}
+		nv50_vm_flush(dev, 5);
+		nv50_vm_flush(dev, 0);
 	}
 
 	nvbe->bound = false;
@@ -272,7 +244,6 @@ nouveau_sgdma_init(struct drm_device *dev)
 		pci_map_page(dev->pdev, dev_priv->gart_info.sg_dummy_page, 0,
 			     PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	if (dev_priv->card_type < NV_50) {
 		/* Maybe use NV_DMA_TARGET_AGP for PCIE? NVIDIA do this, and
 		 * confirmed to work on c51.  Perhaps means NV_DMA_TARGET_PCIE
@@ -294,7 +265,7 @@ nouveau_sgdma_init(struct drm_device *dev)
 			nv_wo32(dev, gpuobj, (i+4)/4, 0);
 		}
 	}
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	dev_priv->gart_info.type      = NOUVEAU_GART_SGDMA;
 	dev_priv->gart_info.aper_base = 0;
@@ -325,14 +296,11 @@ nouveau_sgdma_get_page(struct drm_device *dev, uint32_t offset, uint32_t *page)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_gpuobj *gpuobj = dev_priv->gart_info.sg_ctxdma;
-	struct nouveau_instmem_engine *instmem = &dev_priv->engine.instmem;
 	int pte;
 
 	pte = (offset >> NV_CTXDMA_PAGE_SHIFT);
 	if (dev_priv->card_type < NV_50) {
-		instmem->prepare_access(dev, false);
 		*page = nv_ro32(dev, gpuobj, (pte + 2)) & ~NV_CTXDMA_PAGE_MASK;
-		instmem->finish_access(dev);
 		return 0;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index b02a231d693..ee3729e7823 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -38,6 +38,7 @@
 #include "nv50_display.h"
 
 static void nouveau_stub_takedown(struct drm_device *dev) {}
+static int nouveau_stub_init(struct drm_device *dev) { return 0; }
 
 static int nouveau_init_engine_ptrs(struct drm_device *dev)
 {
@@ -54,8 +55,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv04_instmem_clear;
 		engine->instmem.bind		= nv04_instmem_bind;
 		engine->instmem.unbind		= nv04_instmem_unbind;
-		engine->instmem.prepare_access	= nv04_instmem_prepare_access;
-		engine->instmem.finish_access	= nv04_instmem_finish_access;
+		engine->instmem.flush		= nv04_instmem_flush;
 		engine->mc.init			= nv04_mc_init;
 		engine->mc.takedown		= nv04_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
@@ -85,6 +85,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv04_fifo_destroy_context;
 		engine->fifo.load_context	= nv04_fifo_load_context;
 		engine->fifo.unload_context	= nv04_fifo_unload_context;
+		engine->display.early_init	= nv04_display_early_init;
+		engine->display.late_takedown	= nv04_display_late_takedown;
+		engine->display.create		= nv04_display_create;
+		engine->display.init		= nv04_display_init;
+		engine->display.destroy		= nv04_display_destroy;
+		engine->gpio.init		= nouveau_stub_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= NULL;
+		engine->gpio.set		= NULL;
+		engine->gpio.irq_enable		= NULL;
 		break;
 	case 0x10:
 		engine->instmem.init		= nv04_instmem_init;
@@ -95,8 +105,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv04_instmem_clear;
 		engine->instmem.bind		= nv04_instmem_bind;
 		engine->instmem.unbind		= nv04_instmem_unbind;
-		engine->instmem.prepare_access	= nv04_instmem_prepare_access;
-		engine->instmem.finish_access	= nv04_instmem_finish_access;
+		engine->instmem.flush		= nv04_instmem_flush;
 		engine->mc.init			= nv04_mc_init;
 		engine->mc.takedown		= nv04_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
@@ -128,6 +137,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv10_fifo_destroy_context;
 		engine->fifo.load_context	= nv10_fifo_load_context;
 		engine->fifo.unload_context	= nv10_fifo_unload_context;
+		engine->display.early_init	= nv04_display_early_init;
+		engine->display.late_takedown	= nv04_display_late_takedown;
+		engine->display.create		= nv04_display_create;
+		engine->display.init		= nv04_display_init;
+		engine->display.destroy		= nv04_display_destroy;
+		engine->gpio.init		= nouveau_stub_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= nv10_gpio_get;
+		engine->gpio.set		= nv10_gpio_set;
+		engine->gpio.irq_enable		= NULL;
 		break;
 	case 0x20:
 		engine->instmem.init		= nv04_instmem_init;
@@ -138,8 +157,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv04_instmem_clear;
 		engine->instmem.bind		= nv04_instmem_bind;
 		engine->instmem.unbind		= nv04_instmem_unbind;
-		engine->instmem.prepare_access	= nv04_instmem_prepare_access;
-		engine->instmem.finish_access	= nv04_instmem_finish_access;
+		engine->instmem.flush		= nv04_instmem_flush;
 		engine->mc.init			= nv04_mc_init;
 		engine->mc.takedown		= nv04_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
@@ -171,6 +189,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv10_fifo_destroy_context;
 		engine->fifo.load_context	= nv10_fifo_load_context;
 		engine->fifo.unload_context	= nv10_fifo_unload_context;
+		engine->display.early_init	= nv04_display_early_init;
+		engine->display.late_takedown	= nv04_display_late_takedown;
+		engine->display.create		= nv04_display_create;
+		engine->display.init		= nv04_display_init;
+		engine->display.destroy		= nv04_display_destroy;
+		engine->gpio.init		= nouveau_stub_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= nv10_gpio_get;
+		engine->gpio.set		= nv10_gpio_set;
+		engine->gpio.irq_enable		= NULL;
 		break;
 	case 0x30:
 		engine->instmem.init		= nv04_instmem_init;
@@ -181,15 +209,14 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv04_instmem_clear;
 		engine->instmem.bind		= nv04_instmem_bind;
 		engine->instmem.unbind		= nv04_instmem_unbind;
-		engine->instmem.prepare_access	= nv04_instmem_prepare_access;
-		engine->instmem.finish_access	= nv04_instmem_finish_access;
+		engine->instmem.flush		= nv04_instmem_flush;
 		engine->mc.init			= nv04_mc_init;
 		engine->mc.takedown		= nv04_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
 		engine->timer.read		= nv04_timer_read;
 		engine->timer.takedown		= nv04_timer_takedown;
-		engine->fb.init			= nv10_fb_init;
-		engine->fb.takedown		= nv10_fb_takedown;
+		engine->fb.init			= nv30_fb_init;
+		engine->fb.takedown		= nv30_fb_takedown;
 		engine->fb.set_region_tiling	= nv10_fb_set_region_tiling;
 		engine->graph.grclass		= nv30_graph_grclass;
 		engine->graph.init		= nv30_graph_init;
@@ -214,6 +241,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv10_fifo_destroy_context;
 		engine->fifo.load_context	= nv10_fifo_load_context;
 		engine->fifo.unload_context	= nv10_fifo_unload_context;
+		engine->display.early_init	= nv04_display_early_init;
+		engine->display.late_takedown	= nv04_display_late_takedown;
+		engine->display.create		= nv04_display_create;
+		engine->display.init		= nv04_display_init;
+		engine->display.destroy		= nv04_display_destroy;
+		engine->gpio.init		= nouveau_stub_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= nv10_gpio_get;
+		engine->gpio.set		= nv10_gpio_set;
+		engine->gpio.irq_enable		= NULL;
 		break;
 	case 0x40:
 	case 0x60:
@@ -225,8 +262,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv04_instmem_clear;
 		engine->instmem.bind		= nv04_instmem_bind;
 		engine->instmem.unbind		= nv04_instmem_unbind;
-		engine->instmem.prepare_access	= nv04_instmem_prepare_access;
-		engine->instmem.finish_access	= nv04_instmem_finish_access;
+		engine->instmem.flush		= nv04_instmem_flush;
 		engine->mc.init			= nv40_mc_init;
 		engine->mc.takedown		= nv40_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
@@ -258,6 +294,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv40_fifo_destroy_context;
 		engine->fifo.load_context	= nv40_fifo_load_context;
 		engine->fifo.unload_context	= nv40_fifo_unload_context;
+		engine->display.early_init	= nv04_display_early_init;
+		engine->display.late_takedown	= nv04_display_late_takedown;
+		engine->display.create		= nv04_display_create;
+		engine->display.init		= nv04_display_init;
+		engine->display.destroy		= nv04_display_destroy;
+		engine->gpio.init		= nouveau_stub_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= nv10_gpio_get;
+		engine->gpio.set		= nv10_gpio_set;
+		engine->gpio.irq_enable		= NULL;
 		break;
 	case 0x50:
 	case 0x80: /* gotta love NVIDIA's consistency.. */
@@ -271,8 +317,10 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->instmem.clear		= nv50_instmem_clear;
 		engine->instmem.bind		= nv50_instmem_bind;
 		engine->instmem.unbind		= nv50_instmem_unbind;
-		engine->instmem.prepare_access	= nv50_instmem_prepare_access;
-		engine->instmem.finish_access	= nv50_instmem_finish_access;
+		if (dev_priv->chipset == 0x50)
+			engine->instmem.flush	= nv50_instmem_flush;
+		else
+			engine->instmem.flush	= nv84_instmem_flush;
 		engine->mc.init			= nv50_mc_init;
 		engine->mc.takedown		= nv50_mc_takedown;
 		engine->timer.init		= nv04_timer_init;
@@ -300,6 +348,16 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv50_fifo_destroy_context;
 		engine->fifo.load_context	= nv50_fifo_load_context;
 		engine->fifo.unload_context	= nv50_fifo_unload_context;
+		engine->display.early_init	= nv50_display_early_init;
+		engine->display.late_takedown	= nv50_display_late_takedown;
+		engine->display.create		= nv50_display_create;
+		engine->display.init		= nv50_display_init;
+		engine->display.destroy		= nv50_display_destroy;
+		engine->gpio.init		= nv50_gpio_init;
+		engine->gpio.takedown		= nouveau_stub_takedown;
+		engine->gpio.get		= nv50_gpio_get;
+		engine->gpio.set		= nv50_gpio_set;
+		engine->gpio.irq_enable		= nv50_gpio_irq_enable;
 		break;
 	default:
 		NV_ERROR(dev, "NV%02x unsupported\n", dev_priv->chipset);
@@ -407,11 +465,6 @@ nouveau_card_init(struct drm_device *dev)
 	struct nouveau_engine *engine;
 	int ret;
 
-	NV_DEBUG(dev, "prev state = %d\n", dev_priv->init_state);
-
-	if (dev_priv->init_state == NOUVEAU_CARD_INIT_DONE)
-		return 0;
-
 	vga_client_register(dev->pdev, dev, NULL, nouveau_vga_set_decode);
 	vga_switcheroo_register_client(dev->pdev, nouveau_switcheroo_set_state,
 				       nouveau_switcheroo_can_switch);
@@ -421,15 +474,17 @@ nouveau_card_init(struct drm_device *dev)
 	if (ret)
 		goto out;
 	engine = &dev_priv->engine;
-	dev_priv->init_state = NOUVEAU_CARD_INIT_FAILED;
 	spin_lock_init(&dev_priv->context_switch_lock);
 
+	/* Make the CRTCs and I2C buses accessible */
+	ret = engine->display.early_init(dev);
+	if (ret)
+		goto out;
+
 	/* Parse BIOS tables / Run init tables if card not POSTed */
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		ret = nouveau_bios_init(dev);
-		if (ret)
-			goto out;
-	}
+	ret = nouveau_bios_init(dev);
+	if (ret)
+		goto out_display_early;
 
 	ret = nouveau_mem_detect(dev);
 	if (ret)
@@ -461,10 +516,15 @@ nouveau_card_init(struct drm_device *dev)
 	if (ret)
 		goto out_gpuobj;
 
+	/* PGPIO */
+	ret = engine->gpio.init(dev);
+	if (ret)
+		goto out_mc;
+
 	/* PTIMER */
 	ret = engine->timer.init(dev);
 	if (ret)
-		goto out_mc;
+		goto out_gpio;
 
 	/* PFB */
 	ret = engine->fb.init(dev);
@@ -485,12 +545,16 @@ nouveau_card_init(struct drm_device *dev)
 			goto out_graph;
 	}
 
+	ret = engine->display.create(dev);
+	if (ret)
+		goto out_fifo;
+
 	/* this call irq_preinstall, register irq handler and
 	 * call irq_postinstall
 	 */
 	ret = drm_irq_install(dev);
 	if (ret)
-		goto out_fifo;
+		goto out_display;
 
 	ret = drm_vblank_init(dev, 0);
 	if (ret)
@@ -504,35 +568,18 @@ nouveau_card_init(struct drm_device *dev)
 			goto out_irq;
 	}
 
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		if (dev_priv->card_type >= NV_50)
-			ret = nv50_display_create(dev);
-		else
-			ret = nv04_display_create(dev);
-		if (ret)
-			goto out_channel;
-	}
-
 	ret = nouveau_backlight_init(dev);
 	if (ret)
 		NV_ERROR(dev, "Error %d registering backlight\n", ret);
 
-	dev_priv->init_state = NOUVEAU_CARD_INIT_DONE;
-
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		nouveau_fbcon_init(dev);
-		drm_kms_helper_poll_init(dev);
-	}
-
+	nouveau_fbcon_init(dev);
+	drm_kms_helper_poll_init(dev);
 	return 0;
 
-out_channel:
-	if (dev_priv->channel) {
-		nouveau_channel_free(dev_priv->channel);
-		dev_priv->channel = NULL;
-	}
 out_irq:
 	drm_irq_uninstall(dev);
+out_display:
+	engine->display.destroy(dev);
 out_fifo:
 	if (!nouveau_noaccel)
 		engine->fifo.takedown(dev);
@@ -543,6 +590,8 @@ out_fb:
 	engine->fb.takedown(dev);
 out_timer:
 	engine->timer.takedown(dev);
+out_gpio:
+	engine->gpio.takedown(dev);
 out_mc:
 	engine->mc.takedown(dev);
 out_gpuobj:
@@ -556,6 +605,8 @@ out_gpuobj_early:
 	nouveau_gpuobj_late_takedown(dev);
 out_bios:
 	nouveau_bios_takedown(dev);
+out_display_early:
+	engine->display.late_takedown(dev);
 out:
 	vga_client_register(dev->pdev, NULL, NULL, NULL);
 	return ret;
@@ -566,45 +617,39 @@ static void nouveau_card_takedown(struct drm_device *dev)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_engine *engine = &dev_priv->engine;
 
-	NV_DEBUG(dev, "prev state = %d\n", dev_priv->init_state);
-
-	if (dev_priv->init_state != NOUVEAU_CARD_INIT_DOWN) {
-
-		nouveau_backlight_exit(dev);
-
-		if (dev_priv->channel) {
-			nouveau_channel_free(dev_priv->channel);
-			dev_priv->channel = NULL;
-		}
+	nouveau_backlight_exit(dev);
 
-		if (!nouveau_noaccel) {
-			engine->fifo.takedown(dev);
-			engine->graph.takedown(dev);
-		}
-		engine->fb.takedown(dev);
-		engine->timer.takedown(dev);
-		engine->mc.takedown(dev);
+	if (dev_priv->channel) {
+		nouveau_channel_free(dev_priv->channel);
+		dev_priv->channel = NULL;
+	}
 
-		mutex_lock(&dev->struct_mutex);
-		ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
-		ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
-		mutex_unlock(&dev->struct_mutex);
-		nouveau_sgdma_takedown(dev);
+	if (!nouveau_noaccel) {
+		engine->fifo.takedown(dev);
+		engine->graph.takedown(dev);
+	}
+	engine->fb.takedown(dev);
+	engine->timer.takedown(dev);
+	engine->gpio.takedown(dev);
+	engine->mc.takedown(dev);
+	engine->display.late_takedown(dev);
 
-		nouveau_gpuobj_takedown(dev);
-		nouveau_mem_close(dev);
-		engine->instmem.takedown(dev);
+	mutex_lock(&dev->struct_mutex);
+	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_VRAM);
+	ttm_bo_clean_mm(&dev_priv->ttm.bdev, TTM_PL_TT);
+	mutex_unlock(&dev->struct_mutex);
+	nouveau_sgdma_takedown(dev);
 
-		if (drm_core_check_feature(dev, DRIVER_MODESET))
-			drm_irq_uninstall(dev);
+	nouveau_gpuobj_takedown(dev);
+	nouveau_mem_close(dev);
+	engine->instmem.takedown(dev);
 
-		nouveau_gpuobj_late_takedown(dev);
-		nouveau_bios_takedown(dev);
+	drm_irq_uninstall(dev);
 
-		vga_client_register(dev->pdev, NULL, NULL, NULL);
+	nouveau_gpuobj_late_takedown(dev);
+	nouveau_bios_takedown(dev);
 
-		dev_priv->init_state = NOUVEAU_CARD_INIT_DOWN;
-	}
+	vga_client_register(dev->pdev, NULL, NULL, NULL);
 }
 
 /* here a client dies, release the stuff that was allocated for its
@@ -691,6 +736,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 	struct drm_nouveau_private *dev_priv;
 	uint32_t reg0;
 	resource_size_t mmio_start_offs;
+	int ret;
 
 	dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
 	if (!dev_priv)
@@ -699,7 +745,6 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 	dev_priv->dev = dev;
 
 	dev_priv->flags = flags & NOUVEAU_FLAGS;
-	dev_priv->init_state = NOUVEAU_CARD_INIT_DOWN;
 
 	NV_DEBUG(dev, "vendor: 0x%X device: 0x%X class: 0x%X\n",
 		 dev->pci_vendor, dev->pci_device, dev->pdev->class);
@@ -773,11 +818,9 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 	NV_INFO(dev, "Detected an NV%2x generation card (0x%08x)\n",
 		dev_priv->card_type, reg0);
 
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		int ret = nouveau_remove_conflicting_drivers(dev);
-		if (ret)
-			return ret;
-	}
+	ret = nouveau_remove_conflicting_drivers(dev);
+	if (ret)
+		return ret;
 
 	/* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
 	if (dev_priv->card_type >= NV_40) {
@@ -812,46 +855,26 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
 		dev_priv->flags |= NV_NFORCE2;
 
 	/* For kernel modesetting, init card now and bring up fbcon */
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		int ret = nouveau_card_init(dev);
-		if (ret)
-			return ret;
-	}
+	ret = nouveau_card_init(dev);
+	if (ret)
+		return ret;
 
 	return 0;
 }
 
-static void nouveau_close(struct drm_device *dev)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-
-	/* In the case of an error dev_priv may not be allocated yet */
-	if (dev_priv)
-		nouveau_card_takedown(dev);
-}
-
-/* KMS: we need mmio at load time, not when the first drm client opens. */
 void nouveau_lastclose(struct drm_device *dev)
 {
-	if (drm_core_check_feature(dev, DRIVER_MODESET))
-		return;
-
-	nouveau_close(dev);
 }
 
 int nouveau_unload(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_engine *engine = &dev_priv->engine;
 
-	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
-		drm_kms_helper_poll_fini(dev);
-		nouveau_fbcon_fini(dev);
-		if (dev_priv->card_type >= NV_50)
-			nv50_display_destroy(dev);
-		else
-			nv04_display_destroy(dev);
-		nouveau_close(dev);
-	}
+	drm_kms_helper_poll_fini(dev);
+	nouveau_fbcon_fini(dev);
+	engine->display.destroy(dev);
+	nouveau_card_takedown(dev);
 
 	iounmap(dev_priv->mmio);
 	iounmap(dev_priv->ramin);
@@ -867,8 +890,6 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct drm_nouveau_getparam *getparam = data;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	switch (getparam->param) {
 	case NOUVEAU_GETPARAM_CHIPSET_ID:
 		getparam->value = dev_priv->chipset;
@@ -937,8 +958,6 @@ nouveau_ioctl_setparam(struct drm_device *dev, void *data,
 {
 	struct drm_nouveau_setparam *setparam = data;
 
-	NOUVEAU_CHECK_INITIALISED_WITH_RETURN;
-
 	switch (setparam->param) {
 	default:
 		NV_ERROR(dev, "unknown parameter %lld\n", setparam->param);
diff --git a/drivers/gpu/drm/nouveau/nouveau_ttm.c b/drivers/gpu/drm/nouveau/nouveau_ttm.c
index c385d50f041..bd35f930568 100644
--- a/drivers/gpu/drm/nouveau/nouveau_ttm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c
@@ -42,13 +42,13 @@ nouveau_ttm_mmap(struct file *filp, struct vm_area_struct *vma)
 }
 
 static int
-nouveau_ttm_mem_global_init(struct ttm_global_reference *ref)
+nouveau_ttm_mem_global_init(struct drm_global_reference *ref)
 {
 	return ttm_mem_global_init(ref->object);
 }
 
 static void
-nouveau_ttm_mem_global_release(struct ttm_global_reference *ref)
+nouveau_ttm_mem_global_release(struct drm_global_reference *ref)
 {
 	ttm_mem_global_release(ref->object);
 }
@@ -56,16 +56,16 @@ nouveau_ttm_mem_global_release(struct ttm_global_reference *ref)
 int
 nouveau_ttm_global_init(struct drm_nouveau_private *dev_priv)
 {
-	struct ttm_global_reference *global_ref;
+	struct drm_global_reference *global_ref;
 	int ret;
 
 	global_ref = &dev_priv->ttm.mem_global_ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_MEM;
+	global_ref->global_type = DRM_GLOBAL_TTM_MEM;
 	global_ref->size = sizeof(struct ttm_mem_global);
 	global_ref->init = &nouveau_ttm_mem_global_init;
 	global_ref->release = &nouveau_ttm_mem_global_release;
 
-	ret = ttm_global_item_ref(global_ref);
+	ret = drm_global_item_ref(global_ref);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Failed setting up TTM memory accounting\n");
 		dev_priv->ttm.mem_global_ref.release = NULL;
@@ -74,15 +74,15 @@ nouveau_ttm_global_init(struct drm_nouveau_private *dev_priv)
 
 	dev_priv->ttm.bo_global_ref.mem_glob = global_ref->object;
 	global_ref = &dev_priv->ttm.bo_global_ref.ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_BO;
+	global_ref->global_type = DRM_GLOBAL_TTM_BO;
 	global_ref->size = sizeof(struct ttm_bo_global);
 	global_ref->init = &ttm_bo_global_init;
 	global_ref->release = &ttm_bo_global_release;
 
-	ret = ttm_global_item_ref(global_ref);
+	ret = drm_global_item_ref(global_ref);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Failed setting up TTM BO subsystem\n");
-		ttm_global_item_unref(&dev_priv->ttm.mem_global_ref);
+		drm_global_item_unref(&dev_priv->ttm.mem_global_ref);
 		dev_priv->ttm.mem_global_ref.release = NULL;
 		return ret;
 	}
@@ -96,8 +96,8 @@ nouveau_ttm_global_release(struct drm_nouveau_private *dev_priv)
 	if (dev_priv->ttm.mem_global_ref.release == NULL)
 		return;
 
-	ttm_global_item_unref(&dev_priv->ttm.bo_global_ref.ref);
-	ttm_global_item_unref(&dev_priv->ttm.mem_global_ref);
+	drm_global_item_unref(&dev_priv->ttm.bo_global_ref.ref);
+	drm_global_item_unref(&dev_priv->ttm.mem_global_ref);
 	dev_priv->ttm.mem_global_ref.release = NULL;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index eba687f1099..1c20c08ce67 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -157,6 +157,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
+	struct drm_connector *connector;
 	unsigned char seq1 = 0, crtc17 = 0;
 	unsigned char crtc1A;
 
@@ -211,6 +212,10 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 	NVVgaSeqReset(dev, nv_crtc->index, false);
 
 	NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
+
+	/* Update connector polling modes */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		nouveau_connector_set_polling(connector);
 }
 
 static bool
diff --git a/drivers/gpu/drm/nouveau/nv04_dac.c b/drivers/gpu/drm/nouveau/nv04_dac.c
index 1cb19e3acb5..ea3627041ec 100644
--- a/drivers/gpu/drm/nouveau/nv04_dac.c
+++ b/drivers/gpu/drm/nouveau/nv04_dac.c
@@ -220,6 +220,7 @@ uint32_t nv17_dac_sample_load(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpio_engine *gpio = &dev_priv->engine.gpio;
 	struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
 	uint32_t sample, testval, regoffset = nv04_dac_output_offset(encoder);
 	uint32_t saved_powerctrl_2 = 0, saved_powerctrl_4 = 0, saved_routput,
@@ -251,22 +252,21 @@ uint32_t nv17_dac_sample_load(struct drm_encoder *encoder)
 		nvWriteMC(dev, NV_PBUS_POWERCTRL_4, saved_powerctrl_4 & 0xffffffcf);
 	}
 
-	saved_gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1);
-	saved_gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0);
+	saved_gpio1 = gpio->get(dev, DCB_GPIO_TVDAC1);
+	saved_gpio0 = gpio->get(dev, DCB_GPIO_TVDAC0);
 
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC1, dcb->type == OUTPUT_TV);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC0, dcb->type == OUTPUT_TV);
+	gpio->set(dev, DCB_GPIO_TVDAC1, dcb->type == OUTPUT_TV);
+	gpio->set(dev, DCB_GPIO_TVDAC0, dcb->type == OUTPUT_TV);
 
 	msleep(4);
 
 	saved_routput = NVReadRAMDAC(dev, 0, NV_PRAMDAC_DACCLK + regoffset);
 	head = (saved_routput & 0x100) >> 8;
-#if 0
-	/* if there's a spare crtc, using it will minimise flicker for the case
-	 * where the in-use crtc is in use by an off-chip tmds encoder */
-	if (xf86_config->crtc[head]->enabled && !xf86_config->crtc[head ^ 1]->enabled)
+
+	/* if there's a spare crtc, using it will minimise flicker */
+	if (!(NVReadVgaCrtc(dev, head, NV_CIO_CRE_RPC1_INDEX) & 0xC0))
 		head ^= 1;
-#endif
+
 	/* nv driver and nv31 use 0xfffffeee, nv34 and 6600 use 0xfffffece */
 	routput = (saved_routput & 0xfffffece) | head << 8;
 
@@ -304,8 +304,8 @@ uint32_t nv17_dac_sample_load(struct drm_encoder *encoder)
 		nvWriteMC(dev, NV_PBUS_POWERCTRL_4, saved_powerctrl_4);
 	nvWriteMC(dev, NV_PBUS_POWERCTRL_2, saved_powerctrl_2);
 
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC1, saved_gpio1);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC0, saved_gpio0);
+	gpio->set(dev, DCB_GPIO_TVDAC1, saved_gpio1);
+	gpio->set(dev, DCB_GPIO_TVDAC0, saved_gpio0);
 
 	return sample;
 }
@@ -315,9 +315,12 @@ nv17_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector)
 {
 	struct drm_device *dev = encoder->dev;
 	struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
-	uint32_t sample = nv17_dac_sample_load(encoder);
 
-	if (sample & NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
+	if (nv04_dac_in_use(encoder))
+		return connector_status_disconnected;
+
+	if (nv17_dac_sample_load(encoder) &
+	    NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
 		NV_INFO(dev, "Load detected on output %c\n",
 			'@' + ffs(dcb->or));
 		return connector_status_connected;
@@ -330,6 +333,9 @@ static bool nv04_dac_mode_fixup(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode)
 {
+	if (nv04_dac_in_use(encoder))
+		return false;
+
 	return true;
 }
 
@@ -428,6 +434,17 @@ void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable)
 	}
 }
 
+/* Check if the DAC corresponding to 'encoder' is being used by
+ * someone else. */
+bool nv04_dac_in_use(struct drm_encoder *encoder)
+{
+	struct drm_nouveau_private *dev_priv = encoder->dev->dev_private;
+	struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
+
+	return nv_gf4_disp_arch(encoder->dev) &&
+		(dev_priv->dac_users[ffs(dcb->or) - 1] & ~(1 << dcb->index));
+}
+
 static void nv04_dac_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -501,11 +518,13 @@ static const struct drm_encoder_funcs nv04_dac_funcs = {
 	.destroy = nv04_dac_destroy,
 };
 
-int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry)
+int
+nv04_dac_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
 	const struct drm_encoder_helper_funcs *helper;
-	struct drm_encoder *encoder;
 	struct nouveau_encoder *nv_encoder = NULL;
+	struct drm_device *dev = connector->dev;
+	struct drm_encoder *encoder;
 
 	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
 	if (!nv_encoder)
@@ -527,5 +546,6 @@ int nv04_dac_create(struct drm_device *dev, struct dcb_entry *entry)
 	encoder->possible_crtcs = entry->heads;
 	encoder->possible_clones = 0;
 
+	drm_mode_connector_attach_encoder(connector, encoder);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index 41634d4752f..3311f3a8c81 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -413,10 +413,6 @@ static void nv04_dfp_commit(struct drm_encoder *encoder)
 	struct dcb_entry *dcbe = nv_encoder->dcb;
 	int head = nouveau_crtc(encoder->crtc)->index;
 
-	NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
-		drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
-		nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
-
 	if (dcbe->type == OUTPUT_TMDS)
 		run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
 	else if (dcbe->type == OUTPUT_LVDS)
@@ -584,11 +580,12 @@ static const struct drm_encoder_funcs nv04_dfp_funcs = {
 	.destroy = nv04_dfp_destroy,
 };
 
-int nv04_dfp_create(struct drm_device *dev, struct dcb_entry *entry)
+int
+nv04_dfp_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
 	const struct drm_encoder_helper_funcs *helper;
-	struct drm_encoder *encoder;
 	struct nouveau_encoder *nv_encoder = NULL;
+	struct drm_encoder *encoder;
 	int type;
 
 	switch (entry->type) {
@@ -613,11 +610,12 @@ int nv04_dfp_create(struct drm_device *dev, struct dcb_entry *entry)
 	nv_encoder->dcb = entry;
 	nv_encoder->or = ffs(entry->or) - 1;
 
-	drm_encoder_init(dev, encoder, &nv04_dfp_funcs, type);
+	drm_encoder_init(connector->dev, encoder, &nv04_dfp_funcs, type);
 	drm_encoder_helper_add(encoder, helper);
 
 	encoder->possible_crtcs = entry->heads;
 	encoder->possible_clones = 0;
 
+	drm_mode_connector_attach_encoder(connector, encoder);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nv04_display.c b/drivers/gpu/drm/nouveau/nv04_display.c
index c7898b4f6df..9e28cf772e3 100644
--- a/drivers/gpu/drm/nouveau/nv04_display.c
+++ b/drivers/gpu/drm/nouveau/nv04_display.c
@@ -32,8 +32,6 @@
 #include "nouveau_encoder.h"
 #include "nouveau_connector.h"
 
-#define MULTIPLE_ENCODERS(e) (e & (e - 1))
-
 static void
 nv04_display_store_initial_head_owner(struct drm_device *dev)
 {
@@ -41,7 +39,7 @@ nv04_display_store_initial_head_owner(struct drm_device *dev)
 
 	if (dev_priv->chipset != 0x11) {
 		dev_priv->crtc_owner = NVReadVgaCrtc(dev, 0, NV_CIO_CRE_44);
-		goto ownerknown;
+		return;
 	}
 
 	/* reading CR44 is broken on nv11, so we attempt to infer it */
@@ -52,8 +50,6 @@ nv04_display_store_initial_head_owner(struct drm_device *dev)
 		bool tvA = false;
 		bool tvB = false;
 
-		NVLockVgaCrtcs(dev, false);
-
 		slaved_on_B = NVReadVgaCrtc(dev, 1, NV_CIO_CRE_PIXEL_INDEX) &
 									0x80;
 		if (slaved_on_B)
@@ -66,8 +62,6 @@ nv04_display_store_initial_head_owner(struct drm_device *dev)
 			tvA = !(NVReadVgaCrtc(dev, 0, NV_CIO_CRE_LCD__INDEX) &
 					MASK(NV_CIO_CRE_LCD_LCD_SELECT));
 
-		NVLockVgaCrtcs(dev, true);
-
 		if (slaved_on_A && !tvA)
 			dev_priv->crtc_owner = 0x0;
 		else if (slaved_on_B && !tvB)
@@ -79,14 +73,40 @@ nv04_display_store_initial_head_owner(struct drm_device *dev)
 		else
 			dev_priv->crtc_owner = 0x0;
 	}
+}
+
+int
+nv04_display_early_init(struct drm_device *dev)
+{
+	/* Make the I2C buses accessible. */
+	if (!nv_gf4_disp_arch(dev)) {
+		uint32_t pmc_enable = nv_rd32(dev, NV03_PMC_ENABLE);
+
+		if (!(pmc_enable & 1))
+			nv_wr32(dev, NV03_PMC_ENABLE, pmc_enable | 1);
+	}
 
-ownerknown:
-	NV_INFO(dev, "Initial CRTC_OWNER is %d\n", dev_priv->crtc_owner);
+	/* Unlock the VGA CRTCs. */
+	NVLockVgaCrtcs(dev, false);
+
+	/* Make sure the CRTCs aren't in slaved mode. */
+	if (nv_two_heads(dev)) {
+		nv04_display_store_initial_head_owner(dev);
+		NVSetOwner(dev, 0);
+	}
+
+	return 0;
+}
+
+void
+nv04_display_late_takedown(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	if (nv_two_heads(dev))
+		NVSetOwner(dev, dev_priv->crtc_owner);
 
-	/* we need to ensure the heads are not tied henceforth, or reading any
-	 * 8 bit reg on head B will fail
-	 * setting a single arbitrary head solves that */
-	NVSetOwner(dev, 0);
+	NVLockVgaCrtcs(dev, true);
 }
 
 int
@@ -94,14 +114,13 @@ nv04_display_create(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct dcb_table *dcb = &dev_priv->vbios.dcb;
+	struct drm_connector *connector, *ct;
 	struct drm_encoder *encoder;
 	struct drm_crtc *crtc;
 	int i, ret;
 
 	NV_DEBUG_KMS(dev, "\n");
 
-	if (nv_two_heads(dev))
-		nv04_display_store_initial_head_owner(dev);
 	nouveau_hw_save_vga_fonts(dev, 1);
 
 	drm_mode_config_init(dev);
@@ -132,19 +151,23 @@ nv04_display_create(struct drm_device *dev)
 	for (i = 0; i < dcb->entries; i++) {
 		struct dcb_entry *dcbent = &dcb->entry[i];
 
+		connector = nouveau_connector_create(dev, dcbent->connector);
+		if (IS_ERR(connector))
+			continue;
+
 		switch (dcbent->type) {
 		case OUTPUT_ANALOG:
-			ret = nv04_dac_create(dev, dcbent);
+			ret = nv04_dac_create(connector, dcbent);
 			break;
 		case OUTPUT_LVDS:
 		case OUTPUT_TMDS:
-			ret = nv04_dfp_create(dev, dcbent);
+			ret = nv04_dfp_create(connector, dcbent);
 			break;
 		case OUTPUT_TV:
 			if (dcbent->location == DCB_LOC_ON_CHIP)
-				ret = nv17_tv_create(dev, dcbent);
+				ret = nv17_tv_create(connector, dcbent);
 			else
-				ret = nv04_tv_create(dev, dcbent);
+				ret = nv04_tv_create(connector, dcbent);
 			break;
 		default:
 			NV_WARN(dev, "DCB type %d not known\n", dcbent->type);
@@ -155,12 +178,16 @@ nv04_display_create(struct drm_device *dev)
 			continue;
 	}
 
-	for (i = 0; i < dcb->connector.entries; i++)
-		nouveau_connector_create(dev, &dcb->connector.entry[i]);
+	list_for_each_entry_safe(connector, ct,
+				 &dev->mode_config.connector_list, head) {
+		if (!connector->encoder_ids[0]) {
+			NV_WARN(dev, "%s has no encoders, removing\n",
+				drm_get_connector_name(connector));
+			connector->funcs->destroy(connector);
+		}
+	}
 
 	/* Save previous state */
-	NVLockVgaCrtcs(dev, false);
-
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
 		crtc->funcs->save(crtc);
 
@@ -191,8 +218,6 @@ nv04_display_destroy(struct drm_device *dev)
 	}
 
 	/* Restore state */
-	NVLockVgaCrtcs(dev, false);
-
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		struct drm_encoder_helper_funcs *func = encoder->helper_private;
 
@@ -207,15 +232,12 @@ nv04_display_destroy(struct drm_device *dev)
 	nouveau_hw_save_vga_fonts(dev, 0);
 }
 
-void
-nv04_display_restore(struct drm_device *dev)
+int
+nv04_display_init(struct drm_device *dev)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct drm_encoder *encoder;
 	struct drm_crtc *crtc;
 
-	NVLockVgaCrtcs(dev, false);
-
 	/* meh.. modeset apparently doesn't setup all the regs and depends
 	 * on pre-existing state, for now load the state of the card *before*
 	 * nouveau was loaded, and then do a modeset.
@@ -233,12 +255,6 @@ nv04_display_restore(struct drm_device *dev)
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
 		crtc->funcs->restore(crtc);
 
-	if (nv_two_heads(dev)) {
-		NV_INFO(dev, "Restoring CRTC_OWNER to %d.\n",
-			dev_priv->crtc_owner);
-		NVSetOwner(dev, dev_priv->crtc_owner);
-	}
-
-	NVLockVgaCrtcs(dev, true);
+	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_fifo.c b/drivers/gpu/drm/nouveau/nv04_fifo.c
index 66fe55983b6..06cedd99c26 100644
--- a/drivers/gpu/drm/nouveau/nv04_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv04_fifo.c
@@ -112,6 +112,12 @@ nv04_fifo_channel_id(struct drm_device *dev)
 			NV03_PFIFO_CACHE1_PUSH1_CHID_MASK;
 }
 
+#ifdef __BIG_ENDIAN
+#define DMA_FETCH_ENDIANNESS NV_PFIFO_CACHE1_BIG_ENDIAN
+#else
+#define DMA_FETCH_ENDIANNESS 0
+#endif
+
 int
 nv04_fifo_create_context(struct nouveau_channel *chan)
 {
@@ -131,18 +137,13 @@ nv04_fifo_create_context(struct nouveau_channel *chan)
 	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
 
 	/* Setup initial state */
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	RAMFC_WR(DMA_PUT, chan->pushbuf_base);
 	RAMFC_WR(DMA_GET, chan->pushbuf_base);
 	RAMFC_WR(DMA_INSTANCE, chan->pushbuf->instance >> 4);
 	RAMFC_WR(DMA_FETCH, (NV_PFIFO_CACHE1_DMA_FETCH_TRIG_128_BYTES |
 			     NV_PFIFO_CACHE1_DMA_FETCH_SIZE_128_BYTES |
 			     NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_8 |
-#ifdef __BIG_ENDIAN
-			     NV_PFIFO_CACHE1_BIG_ENDIAN |
-#endif
-			     0));
-	dev_priv->engine.instmem.finish_access(dev);
+			     DMA_FETCH_ENDIANNESS));
 
 	/* enable the fifo dma operation */
 	nv_wr32(dev, NV04_PFIFO_MODE,
@@ -169,8 +170,6 @@ nv04_fifo_do_load_context(struct drm_device *dev, int chid)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	uint32_t fc = NV04_RAMFC(chid), tmp;
 
-	dev_priv->engine.instmem.prepare_access(dev, false);
-
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_PUT, nv_ri32(dev, fc + 0));
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_GET, nv_ri32(dev, fc + 4));
 	tmp = nv_ri32(dev, fc + 8);
@@ -181,8 +180,6 @@ nv04_fifo_do_load_context(struct drm_device *dev, int chid)
 	nv_wr32(dev, NV04_PFIFO_CACHE1_ENGINE, nv_ri32(dev, fc + 20));
 	nv_wr32(dev, NV04_PFIFO_CACHE1_PULL1, nv_ri32(dev, fc + 24));
 
-	dev_priv->engine.instmem.finish_access(dev);
-
 	nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0);
 }
@@ -223,7 +220,6 @@ nv04_fifo_unload_context(struct drm_device *dev)
 		return -EINVAL;
 	}
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	RAMFC_WR(DMA_PUT, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT));
 	RAMFC_WR(DMA_GET, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET));
 	tmp  = nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_DCOUNT) << 16;
@@ -233,7 +229,6 @@ nv04_fifo_unload_context(struct drm_device *dev)
 	RAMFC_WR(DMA_FETCH, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_FETCH));
 	RAMFC_WR(ENGINE, nv_rd32(dev, NV04_PFIFO_CACHE1_ENGINE));
 	RAMFC_WR(PULL1_ENGINE, nv_rd32(dev, NV04_PFIFO_CACHE1_PULL1));
-	dev_priv->engine.instmem.finish_access(dev);
 
 	nv04_fifo_do_load_context(dev, pfifo->channels - 1);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, pfifo->channels - 1);
@@ -297,6 +292,7 @@ nv04_fifo_init(struct drm_device *dev)
 
 	nv04_fifo_init_intr(dev);
 	pfifo->enable(dev);
+	pfifo->reassign(dev, true);
 
 	for (i = 0; i < dev_priv->engine.fifo.channels; i++) {
 		if (dev_priv->fifos[i]) {
diff --git a/drivers/gpu/drm/nouveau/nv04_graph.c b/drivers/gpu/drm/nouveau/nv04_graph.c
index 618355e9cdd..c8973421b63 100644
--- a/drivers/gpu/drm/nouveau/nv04_graph.c
+++ b/drivers/gpu/drm/nouveau/nv04_graph.c
@@ -342,7 +342,7 @@ static uint32_t nv04_graph_ctx_regs[] = {
 };
 
 struct graph_state {
-	int nv04[ARRAY_SIZE(nv04_graph_ctx_regs)];
+	uint32_t nv04[ARRAY_SIZE(nv04_graph_ctx_regs)];
 };
 
 struct nouveau_channel *
@@ -527,8 +527,7 @@ static int
 nv04_graph_mthd_set_ref(struct nouveau_channel *chan, int grclass,
 			int mthd, uint32_t data)
 {
-	chan->fence.last_sequence_irq = data;
-	nouveau_fence_handler(chan->dev, chan->id);
+	atomic_set(&chan->fence.last_sequence_irq, data);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_instmem.c b/drivers/gpu/drm/nouveau/nv04_instmem.c
index a3b9563a6f6..4408232d33f 100644
--- a/drivers/gpu/drm/nouveau/nv04_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv04_instmem.c
@@ -49,10 +49,8 @@ nv04_instmem_determine_amount(struct drm_device *dev)
 	NV_DEBUG(dev, "RAMIN size: %dKiB\n", dev_priv->ramin_rsvd_vram >> 10);
 
 	/* Clear all of it, except the BIOS image that's in the first 64KiB */
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	for (i = 64 * 1024; i < dev_priv->ramin_rsvd_vram; i += 4)
 		nv_wi32(dev, i, 0x00000000);
-	dev_priv->engine.instmem.finish_access(dev);
 }
 
 static void
@@ -106,7 +104,7 @@ int nv04_instmem_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	uint32_t offset;
-	int ret = 0;
+	int ret;
 
 	nv04_instmem_determine_amount(dev);
 	nv04_instmem_configure_fixed_tables(dev);
@@ -129,14 +127,14 @@ int nv04_instmem_init(struct drm_device *dev)
 			offset = 0x40000;
 	}
 
-	ret = nouveau_mem_init_heap(&dev_priv->ramin_heap,
-				    offset, dev_priv->ramin_rsvd_vram - offset);
+	ret = drm_mm_init(&dev_priv->ramin_heap, offset,
+			  dev_priv->ramin_rsvd_vram - offset);
 	if (ret) {
-		dev_priv->ramin_heap = NULL;
-		NV_ERROR(dev, "Failed to init RAMIN heap\n");
+		NV_ERROR(dev, "Failed to init RAMIN heap: %d\n", ret);
+		return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 void
@@ -186,12 +184,7 @@ nv04_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 }
 
 void
-nv04_instmem_prepare_access(struct drm_device *dev, bool write)
-{
-}
-
-void
-nv04_instmem_finish_access(struct drm_device *dev)
+nv04_instmem_flush(struct drm_device *dev)
 {
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_mc.c b/drivers/gpu/drm/nouveau/nv04_mc.c
index 617ed1e0526..2af43a1cb2e 100644
--- a/drivers/gpu/drm/nouveau/nv04_mc.c
+++ b/drivers/gpu/drm/nouveau/nv04_mc.c
@@ -11,6 +11,10 @@ nv04_mc_init(struct drm_device *dev)
 	 */
 
 	nv_wr32(dev, NV03_PMC_ENABLE, 0xFFFFFFFF);
+
+	/* Disable PROM access. */
+	nv_wr32(dev, NV_PBUS_PCI_NV_20, NV_PBUS_PCI_NV_20_ROM_SHADOW_ENABLED);
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv04_tv.c b/drivers/gpu/drm/nouveau/nv04_tv.c
index c4e3404337d..94e299cef0b 100644
--- a/drivers/gpu/drm/nouveau/nv04_tv.c
+++ b/drivers/gpu/drm/nouveau/nv04_tv.c
@@ -34,69 +34,26 @@
 
 #include "i2c/ch7006.h"
 
-static struct {
-	struct i2c_board_info board_info;
-	struct drm_encoder_funcs funcs;
-	struct drm_encoder_helper_funcs hfuncs;
-	void *params;
-
-} nv04_tv_encoder_info[] = {
+static struct i2c_board_info nv04_tv_encoder_info[] = {
 	{
-		.board_info = { I2C_BOARD_INFO("ch7006", 0x75) },
-		.params = &(struct ch7006_encoder_params) {
+		I2C_BOARD_INFO("ch7006", 0x75),
+		.platform_data = &(struct ch7006_encoder_params) {
 			CH7006_FORMAT_RGB24m12I, CH7006_CLOCK_MASTER,
 			0, 0, 0,
 			CH7006_SYNC_SLAVE, CH7006_SYNC_SEPARATED,
 			CH7006_POUT_3_3V, CH7006_ACTIVE_HSYNC
-		},
+		}
 	},
+	{ }
 };
 
-static bool probe_i2c_addr(struct i2c_adapter *adapter, int addr)
-{
-	struct i2c_msg msg = {
-		.addr = addr,
-		.len = 0,
-	};
-
-	return i2c_transfer(adapter, &msg, 1) == 1;
-}
-
 int nv04_tv_identify(struct drm_device *dev, int i2c_index)
 {
-	struct nouveau_i2c_chan *i2c;
-	bool was_locked;
-	int i, ret;
-
-	NV_TRACE(dev, "Probing TV encoders on I2C bus: %d\n", i2c_index);
-
-	i2c = nouveau_i2c_find(dev, i2c_index);
-	if (!i2c)
-		return -ENODEV;
-
-	was_locked = NVLockVgaCrtcs(dev, false);
-
-	for (i = 0; i < ARRAY_SIZE(nv04_tv_encoder_info); i++) {
-		if (probe_i2c_addr(&i2c->adapter,
-				   nv04_tv_encoder_info[i].board_info.addr)) {
-			ret = i;
-			break;
-		}
-	}
-
-	if (i < ARRAY_SIZE(nv04_tv_encoder_info)) {
-		NV_TRACE(dev, "Detected TV encoder: %s\n",
-			 nv04_tv_encoder_info[i].board_info.type);
-
-	} else {
-		NV_TRACE(dev, "No TV encoders found.\n");
-		i = -ENODEV;
-	}
-
-	NVLockVgaCrtcs(dev, was_locked);
-	return i;
+	return nouveau_i2c_identify(dev, "TV encoder",
+				    nv04_tv_encoder_info, i2c_index);
 }
 
+
 #define PLLSEL_TV_CRTC1_MASK				\
 	(NV_PRAMDAC_PLL_COEFF_SELECT_TV_VSCLK1		\
 	 | NV_PRAMDAC_PLL_COEFF_SELECT_TV_PCLK1)
@@ -214,30 +171,32 @@ static void nv04_tv_commit(struct drm_encoder *encoder)
 
 static void nv04_tv_destroy(struct drm_encoder *encoder)
 {
-	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-
 	to_encoder_slave(encoder)->slave_funcs->destroy(encoder);
 
 	drm_encoder_cleanup(encoder);
 
-	kfree(nv_encoder);
+	kfree(encoder->helper_private);
+	kfree(nouveau_encoder(encoder));
 }
 
-int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry)
+static const struct drm_encoder_funcs nv04_tv_funcs = {
+	.destroy = nv04_tv_destroy,
+};
+
+int
+nv04_tv_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
 	struct nouveau_encoder *nv_encoder;
 	struct drm_encoder *encoder;
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct i2c_adapter *adap;
-	struct drm_encoder_funcs *funcs = NULL;
-	struct drm_encoder_helper_funcs *hfuncs = NULL;
-	struct drm_encoder_slave_funcs *sfuncs = NULL;
-	int i2c_index = entry->i2c_index;
+	struct drm_device *dev = connector->dev;
+	struct drm_encoder_helper_funcs *hfuncs;
+	struct drm_encoder_slave_funcs *sfuncs;
+	struct nouveau_i2c_chan *i2c =
+		nouveau_i2c_find(dev, entry->i2c_index);
 	int type, ret;
-	bool was_locked;
 
 	/* Ensure that we can talk to this encoder */
-	type = nv04_tv_identify(dev, i2c_index);
+	type = nv04_tv_identify(dev, entry->i2c_index);
 	if (type < 0)
 		return type;
 
@@ -246,41 +205,32 @@ int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry)
 	if (!nv_encoder)
 		return -ENOMEM;
 
+	hfuncs = kzalloc(sizeof(*hfuncs), GFP_KERNEL);
+	if (!hfuncs) {
+		ret = -ENOMEM;
+		goto fail_free;
+	}
+
 	/* Initialize the common members */
 	encoder = to_drm_encoder(nv_encoder);
 
-	funcs = &nv04_tv_encoder_info[type].funcs;
-	hfuncs = &nv04_tv_encoder_info[type].hfuncs;
-
-	drm_encoder_init(dev, encoder, funcs, DRM_MODE_ENCODER_TVDAC);
+	drm_encoder_init(dev, encoder, &nv04_tv_funcs, DRM_MODE_ENCODER_TVDAC);
 	drm_encoder_helper_add(encoder, hfuncs);
 
 	encoder->possible_crtcs = entry->heads;
 	encoder->possible_clones = 0;
-
 	nv_encoder->dcb = entry;
 	nv_encoder->or = ffs(entry->or) - 1;
 
 	/* Run the slave-specific initialization */
-	adap = &dev_priv->vbios.dcb.i2c[i2c_index].chan->adapter;
-
-	was_locked = NVLockVgaCrtcs(dev, false);
-
-	ret = drm_i2c_encoder_init(encoder->dev, to_encoder_slave(encoder), adap,
-				   &nv04_tv_encoder_info[type].board_info);
-
-	NVLockVgaCrtcs(dev, was_locked);
-
+	ret = drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
+				   &i2c->adapter, &nv04_tv_encoder_info[type]);
 	if (ret < 0)
-		goto fail;
+		goto fail_cleanup;
 
 	/* Fill the function pointers */
 	sfuncs = to_encoder_slave(encoder)->slave_funcs;
 
-	*funcs = (struct drm_encoder_funcs) {
-		.destroy = nv04_tv_destroy,
-	};
-
 	*hfuncs = (struct drm_encoder_helper_funcs) {
 		.dpms = nv04_tv_dpms,
 		.save = sfuncs->save,
@@ -292,14 +242,17 @@ int nv04_tv_create(struct drm_device *dev, struct dcb_entry *entry)
 		.detect = sfuncs->detect,
 	};
 
-	/* Set the slave encoder configuration */
-	sfuncs->set_config(encoder, nv04_tv_encoder_info[type].params);
+	/* Attach it to the specified connector. */
+	sfuncs->set_config(encoder, nv04_tv_encoder_info[type].platform_data);
+	sfuncs->create_resources(encoder, connector);
+	drm_mode_connector_attach_encoder(connector, encoder);
 
 	return 0;
 
-fail:
+fail_cleanup:
 	drm_encoder_cleanup(encoder);
-
+	kfree(hfuncs);
+fail_free:
 	kfree(nv_encoder);
 	return ret;
 }
diff --git a/drivers/gpu/drm/nouveau/nv10_fifo.c b/drivers/gpu/drm/nouveau/nv10_fifo.c
index 7aeabf262bc..7a4069cf5d0 100644
--- a/drivers/gpu/drm/nouveau/nv10_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv10_fifo.c
@@ -55,7 +55,6 @@ nv10_fifo_create_context(struct nouveau_channel *chan)
 	/* Fill entries that are seen filled in dumps of nvidia driver just
 	 * after channel's is put into DMA mode
 	 */
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	nv_wi32(dev, fc +  0, chan->pushbuf_base);
 	nv_wi32(dev, fc +  4, chan->pushbuf_base);
 	nv_wi32(dev, fc + 12, chan->pushbuf->instance >> 4);
@@ -66,7 +65,6 @@ nv10_fifo_create_context(struct nouveau_channel *chan)
 			      NV_PFIFO_CACHE1_BIG_ENDIAN |
 #endif
 			      0);
-	dev_priv->engine.instmem.finish_access(dev);
 
 	/* enable the fifo dma operation */
 	nv_wr32(dev, NV04_PFIFO_MODE,
@@ -91,8 +89,6 @@ nv10_fifo_do_load_context(struct drm_device *dev, int chid)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	uint32_t fc = NV10_RAMFC(chid), tmp;
 
-	dev_priv->engine.instmem.prepare_access(dev, false);
-
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_PUT, nv_ri32(dev, fc + 0));
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_GET, nv_ri32(dev, fc + 4));
 	nv_wr32(dev, NV10_PFIFO_CACHE1_REF_CNT, nv_ri32(dev, fc + 8));
@@ -117,8 +113,6 @@ nv10_fifo_do_load_context(struct drm_device *dev, int chid)
 	nv_wr32(dev, NV10_PFIFO_CACHE1_DMA_SUBROUTINE, nv_ri32(dev, fc + 48));
 
 out:
-	dev_priv->engine.instmem.finish_access(dev);
-
 	nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0);
 }
@@ -155,8 +149,6 @@ nv10_fifo_unload_context(struct drm_device *dev)
 		return 0;
 	fc = NV10_RAMFC(chid);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
-
 	nv_wi32(dev, fc +  0, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT));
 	nv_wi32(dev, fc +  4, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET));
 	nv_wi32(dev, fc +  8, nv_rd32(dev, NV10_PFIFO_CACHE1_REF_CNT));
@@ -179,8 +171,6 @@ nv10_fifo_unload_context(struct drm_device *dev)
 	nv_wi32(dev, fc + 48, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET));
 
 out:
-	dev_priv->engine.instmem.finish_access(dev);
-
 	nv10_fifo_do_load_context(dev, pfifo->channels - 1);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, pfifo->channels - 1);
 	return 0;
diff --git a/drivers/gpu/drm/nouveau/nv17_gpio.c b/drivers/gpu/drm/nouveau/nv10_gpio.c
index 2e58c331e9b..007fc29e2f8 100644
--- a/drivers/gpu/drm/nouveau/nv17_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv10_gpio.c
@@ -55,7 +55,7 @@ get_gpio_location(struct dcb_gpio_entry *ent, uint32_t *reg, uint32_t *shift,
 }
 
 int
-nv17_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag)
+nv10_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag)
 {
 	struct dcb_gpio_entry *ent = nouveau_bios_gpio_entry(dev, tag);
 	uint32_t reg, shift, mask, value;
@@ -72,7 +72,7 @@ nv17_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag)
 }
 
 int
-nv17_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state)
+nv10_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state)
 {
 	struct dcb_gpio_entry *ent = nouveau_bios_gpio_entry(dev, tag);
 	uint32_t reg, shift, mask, value;
diff --git a/drivers/gpu/drm/nouveau/nv17_tv.c b/drivers/gpu/drm/nouveau/nv17_tv.c
index 74c880374fb..44fefb0c708 100644
--- a/drivers/gpu/drm/nouveau/nv17_tv.c
+++ b/drivers/gpu/drm/nouveau/nv17_tv.c
@@ -37,6 +37,7 @@ static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpio_engine *gpio = &dev_priv->engine.gpio;
 	uint32_t testval, regoffset = nv04_dac_output_offset(encoder);
 	uint32_t gpio0, gpio1, fp_htotal, fp_hsync_start, fp_hsync_end,
 		fp_control, test_ctrl, dacclk, ctv_14, ctv_1c, ctv_6c;
@@ -52,8 +53,8 @@ static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
 	head = (dacclk & 0x100) >> 8;
 
 	/* Save the previous state. */
-	gpio1 = nv17_gpio_get(dev, DCB_GPIO_TVDAC1);
-	gpio0 = nv17_gpio_get(dev, DCB_GPIO_TVDAC0);
+	gpio1 = gpio->get(dev, DCB_GPIO_TVDAC1);
+	gpio0 = gpio->get(dev, DCB_GPIO_TVDAC0);
 	fp_htotal = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL);
 	fp_hsync_start = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START);
 	fp_hsync_end = NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END);
@@ -64,8 +65,8 @@ static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
 	ctv_6c = NVReadRAMDAC(dev, head, 0x680c6c);
 
 	/* Prepare the DAC for load detection.  */
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC1, true);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC0, true);
+	gpio->set(dev, DCB_GPIO_TVDAC1, true);
+	gpio->set(dev, DCB_GPIO_TVDAC0, true);
 
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, 1343);
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, 1047);
@@ -110,12 +111,27 @@ static uint32_t nv42_tv_sample_load(struct drm_encoder *encoder)
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_END, fp_hsync_end);
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HSYNC_START, fp_hsync_start);
 	NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_HTOTAL, fp_htotal);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC1, gpio1);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC0, gpio0);
+	gpio->set(dev, DCB_GPIO_TVDAC1, gpio1);
+	gpio->set(dev, DCB_GPIO_TVDAC0, gpio0);
 
 	return sample;
 }
 
+static bool
+get_tv_detect_quirks(struct drm_device *dev, uint32_t *pin_mask)
+{
+	/* Zotac FX5200 */
+	if (dev->pdev->device == 0x0322 &&
+	    dev->pdev->subsystem_vendor == 0x19da &&
+	    (dev->pdev->subsystem_device == 0x1035 ||
+	     dev->pdev->subsystem_device == 0x2035)) {
+		*pin_mask = 0xc;
+		return false;
+	}
+
+	return true;
+}
+
 static enum drm_connector_status
 nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector)
 {
@@ -124,12 +140,20 @@ nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector)
 	struct drm_mode_config *conf = &dev->mode_config;
 	struct nv17_tv_encoder *tv_enc = to_tv_enc(encoder);
 	struct dcb_entry *dcb = tv_enc->base.dcb;
+	bool reliable = get_tv_detect_quirks(dev, &tv_enc->pin_mask);
 
-	if (dev_priv->chipset == 0x42 ||
-	    dev_priv->chipset == 0x43)
-		tv_enc->pin_mask = nv42_tv_sample_load(encoder) >> 28 & 0xe;
-	else
-		tv_enc->pin_mask = nv17_dac_sample_load(encoder) >> 28 & 0xe;
+	if (nv04_dac_in_use(encoder))
+		return connector_status_disconnected;
+
+	if (reliable) {
+		if (dev_priv->chipset == 0x42 ||
+		    dev_priv->chipset == 0x43)
+			tv_enc->pin_mask =
+				nv42_tv_sample_load(encoder) >> 28 & 0xe;
+		else
+			tv_enc->pin_mask =
+				nv17_dac_sample_load(encoder) >> 28 & 0xe;
+	}
 
 	switch (tv_enc->pin_mask) {
 	case 0x2:
@@ -154,7 +178,9 @@ nv17_tv_detect(struct drm_encoder *encoder, struct drm_connector *connector)
 					 conf->tv_subconnector_property,
 					 tv_enc->subconnector);
 
-	if (tv_enc->subconnector) {
+	if (!reliable) {
+		return connector_status_unknown;
+	} else if (tv_enc->subconnector) {
 		NV_INFO(dev, "Load detected on output %c\n",
 			'@' + ffs(dcb->or));
 		return connector_status_connected;
@@ -296,6 +322,9 @@ static bool nv17_tv_mode_fixup(struct drm_encoder *encoder,
 {
 	struct nv17_tv_norm_params *tv_norm = get_tv_norm(encoder);
 
+	if (nv04_dac_in_use(encoder))
+		return false;
+
 	if (tv_norm->kind == CTV_ENC_MODE)
 		adjusted_mode->clock = tv_norm->ctv_enc_mode.mode.clock;
 	else
@@ -307,6 +336,8 @@ static bool nv17_tv_mode_fixup(struct drm_encoder *encoder,
 static void  nv17_tv_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_gpio_engine *gpio = &dev_priv->engine.gpio;
 	struct nv17_tv_state *regs = &to_tv_enc(encoder)->state;
 	struct nv17_tv_norm_params *tv_norm = get_tv_norm(encoder);
 
@@ -331,8 +362,8 @@ static void  nv17_tv_dpms(struct drm_encoder *encoder, int mode)
 
 	nv_load_ptv(dev, regs, 200);
 
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC1, mode == DRM_MODE_DPMS_ON);
-	nv17_gpio_set(dev, DCB_GPIO_TVDAC0, mode == DRM_MODE_DPMS_ON);
+	gpio->set(dev, DCB_GPIO_TVDAC1, mode == DRM_MODE_DPMS_ON);
+	gpio->set(dev, DCB_GPIO_TVDAC0, mode == DRM_MODE_DPMS_ON);
 
 	nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON);
 }
@@ -744,8 +775,10 @@ static struct drm_encoder_funcs nv17_tv_funcs = {
 	.destroy = nv17_tv_destroy,
 };
 
-int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry)
+int
+nv17_tv_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
+	struct drm_device *dev = connector->dev;
 	struct drm_encoder *encoder;
 	struct nv17_tv_encoder *tv_enc = NULL;
 
@@ -774,5 +807,7 @@ int nv17_tv_create(struct drm_device *dev, struct dcb_entry *entry)
 	encoder->possible_crtcs = entry->heads;
 	encoder->possible_clones = 0;
 
+	nv17_tv_create_resources(encoder, connector);
+	drm_mode_connector_attach_encoder(connector, encoder);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nv20_graph.c b/drivers/gpu/drm/nouveau/nv20_graph.c
index d6fc0a82f03..17f309b36c9 100644
--- a/drivers/gpu/drm/nouveau/nv20_graph.c
+++ b/drivers/gpu/drm/nouveau/nv20_graph.c
@@ -370,68 +370,54 @@ nv20_graph_create_context(struct nouveau_channel *chan)
 {
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
 	void (*ctx_init)(struct drm_device *, struct nouveau_gpuobj *);
-	unsigned int ctx_size;
 	unsigned int idoffs = 0x28/4;
 	int ret;
 
 	switch (dev_priv->chipset) {
 	case 0x20:
-		ctx_size = NV20_GRCTX_SIZE;
 		ctx_init = nv20_graph_context_init;
 		idoffs = 0;
 		break;
 	case 0x25:
 	case 0x28:
-		ctx_size = NV25_GRCTX_SIZE;
 		ctx_init = nv25_graph_context_init;
 		break;
 	case 0x2a:
-		ctx_size = NV2A_GRCTX_SIZE;
 		ctx_init = nv2a_graph_context_init;
 		idoffs = 0;
 		break;
 	case 0x30:
 	case 0x31:
-		ctx_size = NV30_31_GRCTX_SIZE;
 		ctx_init = nv30_31_graph_context_init;
 		break;
 	case 0x34:
-		ctx_size = NV34_GRCTX_SIZE;
 		ctx_init = nv34_graph_context_init;
 		break;
 	case 0x35:
 	case 0x36:
-		ctx_size = NV35_36_GRCTX_SIZE;
 		ctx_init = nv35_36_graph_context_init;
 		break;
 	default:
-		ctx_size = 0;
-		ctx_init = nv35_36_graph_context_init;
-		NV_ERROR(dev, "Please contact the devs if you want your NV%x"
-			      " card to work\n", dev_priv->chipset);
-		return -ENOSYS;
-		break;
+		BUG_ON(1);
 	}
 
-	ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, ctx_size, 16,
-					  NVOBJ_FLAG_ZERO_ALLOC,
-					  &chan->ramin_grctx);
+	ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pgraph->grctx_size,
+				     16, NVOBJ_FLAG_ZERO_ALLOC,
+				     &chan->ramin_grctx);
 	if (ret)
 		return ret;
 
 	/* Initialise default context values */
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	ctx_init(dev, chan->ramin_grctx->gpuobj);
 
 	/* nv20: nv_wo32(dev, chan->ramin_grctx->gpuobj, 10, chan->id<<24); */
 	nv_wo32(dev, chan->ramin_grctx->gpuobj, idoffs,
 					(chan->id << 24) | 0x1); /* CTX_USER */
 
-	nv_wo32(dev, dev_priv->ctx_table->gpuobj, chan->id,
-			chan->ramin_grctx->instance >> 4);
-
-	dev_priv->engine.instmem.finish_access(dev);
+	nv_wo32(dev, pgraph->ctx_table->gpuobj, chan->id,
+		     chan->ramin_grctx->instance >> 4);
 	return 0;
 }
 
@@ -440,13 +426,12 @@ nv20_graph_destroy_context(struct nouveau_channel *chan)
 {
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
 
 	if (chan->ramin_grctx)
 		nouveau_gpuobj_ref_del(dev, &chan->ramin_grctx);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
-	nv_wo32(dev, dev_priv->ctx_table->gpuobj, chan->id, 0);
-	dev_priv->engine.instmem.finish_access(dev);
+	nv_wo32(dev, pgraph->ctx_table->gpuobj, chan->id, 0);
 }
 
 int
@@ -538,29 +523,44 @@ nv20_graph_set_region_tiling(struct drm_device *dev, int i, uint32_t addr,
 int
 nv20_graph_init(struct drm_device *dev)
 {
-	struct drm_nouveau_private *dev_priv =
-		(struct drm_nouveau_private *)dev->dev_private;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
 	uint32_t tmp, vramsz;
 	int ret, i;
 
+	switch (dev_priv->chipset) {
+	case 0x20:
+		pgraph->grctx_size = NV20_GRCTX_SIZE;
+		break;
+	case 0x25:
+	case 0x28:
+		pgraph->grctx_size = NV25_GRCTX_SIZE;
+		break;
+	case 0x2a:
+		pgraph->grctx_size = NV2A_GRCTX_SIZE;
+		break;
+	default:
+		NV_ERROR(dev, "unknown chipset, disabling acceleration\n");
+		pgraph->accel_blocked = true;
+		return 0;
+	}
+
 	nv_wr32(dev, NV03_PMC_ENABLE,
 		nv_rd32(dev, NV03_PMC_ENABLE) & ~NV_PMC_ENABLE_PGRAPH);
 	nv_wr32(dev, NV03_PMC_ENABLE,
 		nv_rd32(dev, NV03_PMC_ENABLE) |  NV_PMC_ENABLE_PGRAPH);
 
-	if (!dev_priv->ctx_table) {
+	if (!pgraph->ctx_table) {
 		/* Create Context Pointer Table */
-		dev_priv->ctx_table_size = 32 * 4;
-		ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0,
-						  dev_priv->ctx_table_size, 16,
+		ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0, 32 * 4, 16,
 						  NVOBJ_FLAG_ZERO_ALLOC,
-						  &dev_priv->ctx_table);
+						  &pgraph->ctx_table);
 		if (ret)
 			return ret;
 	}
 
 	nv_wr32(dev, NV20_PGRAPH_CHANNEL_CTX_TABLE,
-		 dev_priv->ctx_table->instance >> 4);
+		     pgraph->ctx_table->instance >> 4);
 
 	nv20_graph_rdi(dev);
 
@@ -616,7 +616,7 @@ nv20_graph_init(struct drm_device *dev)
 	nv_wr32(dev, NV10_PGRAPH_SURFACE, tmp);
 
 	/* begin RAM config */
-	vramsz = drm_get_resource_len(dev, 0) - 1;
+	vramsz = pci_resource_len(dev->pdev, 0) - 1;
 	nv_wr32(dev, 0x4009A4, nv_rd32(dev, NV04_PFB_CFG0));
 	nv_wr32(dev, 0x4009A8, nv_rd32(dev, NV04_PFB_CFG1));
 	nv_wr32(dev, NV10_PGRAPH_RDI_INDEX, 0x00EA0000);
@@ -644,34 +644,52 @@ void
 nv20_graph_takedown(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
 
-	nouveau_gpuobj_ref_del(dev, &dev_priv->ctx_table);
+	nouveau_gpuobj_ref_del(dev, &pgraph->ctx_table);
 }
 
 int
 nv30_graph_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
 	int ret, i;
 
+	switch (dev_priv->chipset) {
+	case 0x30:
+	case 0x31:
+		pgraph->grctx_size = NV30_31_GRCTX_SIZE;
+		break;
+	case 0x34:
+		pgraph->grctx_size = NV34_GRCTX_SIZE;
+		break;
+	case 0x35:
+	case 0x36:
+		pgraph->grctx_size = NV35_36_GRCTX_SIZE;
+		break;
+	default:
+		NV_ERROR(dev, "unknown chipset, disabling acceleration\n");
+		pgraph->accel_blocked = true;
+		return 0;
+	}
+
 	nv_wr32(dev, NV03_PMC_ENABLE,
 		nv_rd32(dev, NV03_PMC_ENABLE) & ~NV_PMC_ENABLE_PGRAPH);
 	nv_wr32(dev, NV03_PMC_ENABLE,
 		nv_rd32(dev, NV03_PMC_ENABLE) |  NV_PMC_ENABLE_PGRAPH);
 
-	if (!dev_priv->ctx_table) {
+	if (!pgraph->ctx_table) {
 		/* Create Context Pointer Table */
-		dev_priv->ctx_table_size = 32 * 4;
-		ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0,
-						  dev_priv->ctx_table_size, 16,
+		ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0, 32 * 4, 16,
 						  NVOBJ_FLAG_ZERO_ALLOC,
-						  &dev_priv->ctx_table);
+						  &pgraph->ctx_table);
 		if (ret)
 			return ret;
 	}
 
 	nv_wr32(dev, NV20_PGRAPH_CHANNEL_CTX_TABLE,
-			dev_priv->ctx_table->instance >> 4);
+		     pgraph->ctx_table->instance >> 4);
 
 	nv_wr32(dev, NV03_PGRAPH_INTR   , 0xFFFFFFFF);
 	nv_wr32(dev, NV03_PGRAPH_INTR_EN, 0xFFFFFFFF);
@@ -717,7 +735,7 @@ nv30_graph_init(struct drm_device *dev)
 	nv_wr32(dev, 0x0040075c             , 0x00000001);
 
 	/* begin RAM config */
-	/* vramsz = drm_get_resource_len(dev, 0) - 1; */
+	/* vramsz = pci_resource_len(dev->pdev, 0) - 1; */
 	nv_wr32(dev, 0x4009A4, nv_rd32(dev, NV04_PFB_CFG0));
 	nv_wr32(dev, 0x4009A8, nv_rd32(dev, NV04_PFB_CFG1));
 	if (dev_priv->chipset != 0x34) {
diff --git a/drivers/gpu/drm/nouveau/nv30_fb.c b/drivers/gpu/drm/nouveau/nv30_fb.c
new file mode 100644
index 00000000000..9d35c8b3b83
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nv30_fb.c
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2010 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "nouveau_drv.h"
+#include "nouveau_drm.h"
+
+static int
+calc_ref(int b, int l, int i)
+{
+	int j, x = 0;
+
+	for (j = 0; j < 4; j++) {
+		int n = (b >> (8 * j) & 0xf);
+		int m = (l >> (8 * i) & 0xff) + 2 * (n & 0x8 ? n - 0x10 : n);
+
+		x |= (0x80 | (m & 0x1f)) << (8 * j);
+	}
+
+	return x;
+}
+
+int
+nv30_fb_init(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
+	int i, j;
+
+	pfb->num_tiles = NV10_PFB_TILE__SIZE;
+
+	/* Turn all the tiling regions off. */
+	for (i = 0; i < pfb->num_tiles; i++)
+		pfb->set_region_tiling(dev, i, 0, 0, 0);
+
+	/* Init the memory timing regs at 0x10037c/0x1003ac */
+	if (dev_priv->chipset == 0x30 ||
+	    dev_priv->chipset == 0x31 ||
+	    dev_priv->chipset == 0x35) {
+		/* Related to ROP count */
+		int n = (dev_priv->chipset == 0x31 ? 2 : 4);
+		int b = (dev_priv->chipset > 0x30 ?
+			 nv_rd32(dev, 0x122c) & 0xf : 0);
+		int l = nv_rd32(dev, 0x1003d0);
+
+		for (i = 0; i < n; i++) {
+			for (j = 0; j < 3; j++)
+				nv_wr32(dev, 0x10037c + 0xc * i + 0x4 * j,
+					calc_ref(b, l, j));
+
+			for (j = 0; j < 2; j++)
+				nv_wr32(dev, 0x1003ac + 0x8 * i + 0x4 * j,
+					calc_ref(b, l, j));
+		}
+	}
+
+	return 0;
+}
+
+void
+nv30_fb_takedown(struct drm_device *dev)
+{
+}
diff --git a/drivers/gpu/drm/nouveau/nv40_fifo.c b/drivers/gpu/drm/nouveau/nv40_fifo.c
index 500ccfd3a0b..2b67f1835c3 100644
--- a/drivers/gpu/drm/nouveau/nv40_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv40_fifo.c
@@ -48,7 +48,6 @@ nv40_fifo_create_context(struct nouveau_channel *chan)
 
 	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	nv_wi32(dev, fc +  0, chan->pushbuf_base);
 	nv_wi32(dev, fc +  4, chan->pushbuf_base);
 	nv_wi32(dev, fc + 12, chan->pushbuf->instance >> 4);
@@ -61,7 +60,6 @@ nv40_fifo_create_context(struct nouveau_channel *chan)
 			      0x30000000 /* no idea.. */);
 	nv_wi32(dev, fc + 56, chan->ramin_grctx->instance >> 4);
 	nv_wi32(dev, fc + 60, 0x0001FFFF);
-	dev_priv->engine.instmem.finish_access(dev);
 
 	/* enable the fifo dma operation */
 	nv_wr32(dev, NV04_PFIFO_MODE,
@@ -89,8 +87,6 @@ nv40_fifo_do_load_context(struct drm_device *dev, int chid)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	uint32_t fc = NV40_RAMFC(chid), tmp, tmp2;
 
-	dev_priv->engine.instmem.prepare_access(dev, false);
-
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_PUT, nv_ri32(dev, fc + 0));
 	nv_wr32(dev, NV04_PFIFO_CACHE1_DMA_GET, nv_ri32(dev, fc + 4));
 	nv_wr32(dev, NV10_PFIFO_CACHE1_REF_CNT, nv_ri32(dev, fc + 8));
@@ -127,8 +123,6 @@ nv40_fifo_do_load_context(struct drm_device *dev, int chid)
 	nv_wr32(dev, 0x2088, nv_ri32(dev, fc + 76));
 	nv_wr32(dev, 0x3300, nv_ri32(dev, fc + 80));
 
-	dev_priv->engine.instmem.finish_access(dev);
-
 	nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUT, 0);
 }
@@ -166,7 +160,6 @@ nv40_fifo_unload_context(struct drm_device *dev)
 		return 0;
 	fc = NV40_RAMFC(chid);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	nv_wi32(dev, fc + 0, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_PUT));
 	nv_wi32(dev, fc + 4, nv_rd32(dev, NV04_PFIFO_CACHE1_DMA_GET));
 	nv_wi32(dev, fc + 8, nv_rd32(dev, NV10_PFIFO_CACHE1_REF_CNT));
@@ -200,7 +193,6 @@ nv40_fifo_unload_context(struct drm_device *dev)
 	tmp |= (nv_rd32(dev, NV04_PFIFO_CACHE1_PUT) << 16);
 	nv_wi32(dev, fc + 72, tmp);
 #endif
-	dev_priv->engine.instmem.finish_access(dev);
 
 	nv40_fifo_do_load_context(dev, pfifo->channels - 1);
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1,
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 704a25d04ac..fd7d2b50131 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -58,6 +58,7 @@ nv40_graph_create_context(struct nouveau_channel *chan)
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
+	struct nouveau_grctx ctx = {};
 	int ret;
 
 	ret = nouveau_gpuobj_new_ref(dev, chan, NULL, 0, pgraph->grctx_size,
@@ -67,20 +68,13 @@ nv40_graph_create_context(struct nouveau_channel *chan)
 		return ret;
 
 	/* Initialise default context values */
-	dev_priv->engine.instmem.prepare_access(dev, true);
-	if (!pgraph->ctxprog) {
-		struct nouveau_grctx ctx = {};
-
-		ctx.dev = chan->dev;
-		ctx.mode = NOUVEAU_GRCTX_VALS;
-		ctx.data = chan->ramin_grctx->gpuobj;
-		nv40_grctx_init(&ctx);
-	} else {
-		nouveau_grctx_vals_load(dev, chan->ramin_grctx->gpuobj);
-	}
+	ctx.dev = chan->dev;
+	ctx.mode = NOUVEAU_GRCTX_VALS;
+	ctx.data = chan->ramin_grctx->gpuobj;
+	nv40_grctx_init(&ctx);
+
 	nv_wo32(dev, chan->ramin_grctx->gpuobj, 0,
 		     chan->ramin_grctx->gpuobj->im_pramin->start);
-	dev_priv->engine.instmem.finish_access(dev);
 	return 0;
 }
 
@@ -238,7 +232,8 @@ nv40_graph_init(struct drm_device *dev)
 	struct drm_nouveau_private *dev_priv =
 		(struct drm_nouveau_private *)dev->dev_private;
 	struct nouveau_fb_engine *pfb = &dev_priv->engine.fb;
-	uint32_t vramsz;
+	struct nouveau_grctx ctx = {};
+	uint32_t vramsz, *cp;
 	int i, j;
 
 	nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) &
@@ -246,32 +241,22 @@ nv40_graph_init(struct drm_device *dev)
 	nv_wr32(dev, NV03_PMC_ENABLE, nv_rd32(dev, NV03_PMC_ENABLE) |
 			 NV_PMC_ENABLE_PGRAPH);
 
-	if (nouveau_ctxfw) {
-		nouveau_grctx_prog_load(dev);
-		dev_priv->engine.graph.grctx_size = 175 * 1024;
-	}
+	cp = kmalloc(sizeof(*cp) * 256, GFP_KERNEL);
+	if (!cp)
+		return -ENOMEM;
 
-	if (!dev_priv->engine.graph.ctxprog) {
-		struct nouveau_grctx ctx = {};
-		uint32_t *cp;
+	ctx.dev = dev;
+	ctx.mode = NOUVEAU_GRCTX_PROG;
+	ctx.data = cp;
+	ctx.ctxprog_max = 256;
+	nv40_grctx_init(&ctx);
+	dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4;
 
-		cp = kmalloc(sizeof(*cp) * 256, GFP_KERNEL);
-		if (!cp)
-			return -ENOMEM;
+	nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
+	for (i = 0; i < ctx.ctxprog_len; i++)
+		nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]);
 
-		ctx.dev = dev;
-		ctx.mode = NOUVEAU_GRCTX_PROG;
-		ctx.data = cp;
-		ctx.ctxprog_max = 256;
-		nv40_grctx_init(&ctx);
-		dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4;
-
-		nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
-		for (i = 0; i < ctx.ctxprog_len; i++)
-			nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]);
-
-		kfree(cp);
-	}
+	kfree(cp);
 
 	/* No context present currently */
 	nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0x00000000);
@@ -367,7 +352,7 @@ nv40_graph_init(struct drm_device *dev)
 		nv40_graph_set_region_tiling(dev, i, 0, 0, 0);
 
 	/* begin RAM config */
-	vramsz = drm_get_resource_len(dev, 0) - 1;
+	vramsz = pci_resource_len(dev->pdev, 0) - 1;
 	switch (dev_priv->chipset) {
 	case 0x40:
 		nv_wr32(dev, 0x4009A4, nv_rd32(dev, NV04_PFB_CFG0));
@@ -407,7 +392,6 @@ nv40_graph_init(struct drm_device *dev)
 
 void nv40_graph_takedown(struct drm_device *dev)
 {
-	nouveau_grctx_fini(dev);
 }
 
 struct nouveau_pgraph_object_class nv40_graph_grclass[] = {
diff --git a/drivers/gpu/drm/nouveau/nv40_mc.c b/drivers/gpu/drm/nouveau/nv40_mc.c
index 2a3495e848e..e4e72c12ab6 100644
--- a/drivers/gpu/drm/nouveau/nv40_mc.c
+++ b/drivers/gpu/drm/nouveau/nv40_mc.c
@@ -19,7 +19,7 @@ nv40_mc_init(struct drm_device *dev)
 	case 0x46: /* G72 */
 	case 0x4e:
 	case 0x4c: /* C51_G7X */
-		tmp = nv_rd32(dev, NV40_PFB_020C);
+		tmp = nv_rd32(dev, NV04_PFB_FIFO_DATA);
 		nv_wr32(dev, NV40_PMC_1700, tmp);
 		nv_wr32(dev, NV40_PMC_1704, 0);
 		nv_wr32(dev, NV40_PMC_1708, 0);
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index b4e4a3b05ea..5d11ea10166 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -440,47 +440,15 @@ nv50_crtc_prepare(struct drm_crtc *crtc)
 {
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
-	struct drm_encoder *encoder;
-	uint32_t dac = 0, sor = 0;
 
 	NV_DEBUG_KMS(dev, "index %d\n", nv_crtc->index);
 
-	/* Disconnect all unused encoders. */
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-
-		if (!drm_helper_encoder_in_use(encoder))
-			continue;
-
-		if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
-		    nv_encoder->dcb->type == OUTPUT_TV)
-			dac |= (1 << nv_encoder->or);
-		else
-			sor |= (1 << nv_encoder->or);
-	}
-
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-
-		if (nv_encoder->dcb->type == OUTPUT_ANALOG ||
-		    nv_encoder->dcb->type == OUTPUT_TV) {
-			if (dac & (1 << nv_encoder->or))
-				continue;
-		} else {
-			if (sor & (1 << nv_encoder->or))
-				continue;
-		}
-
-		nv_encoder->disconnect(nv_encoder);
-	}
-
 	nv50_crtc_blank(nv_crtc, true);
 }
 
 static void
 nv50_crtc_commit(struct drm_crtc *crtc)
 {
-	struct drm_crtc *crtc2;
 	struct drm_device *dev = crtc->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_channel *evo = dev_priv->evo;
@@ -491,20 +459,14 @@ nv50_crtc_commit(struct drm_crtc *crtc)
 
 	nv50_crtc_blank(nv_crtc, false);
 
-	/* Explicitly blank all unused crtc's. */
-	list_for_each_entry(crtc2, &dev->mode_config.crtc_list, head) {
-		if (!drm_helper_crtc_in_use(crtc2))
-			nv50_crtc_blank(nouveau_crtc(crtc2), true);
-	}
-
 	ret = RING_SPACE(evo, 2);
 	if (ret) {
 		NV_ERROR(dev, "no space while committing crtc\n");
 		return;
 	}
 	BEGIN_RING(evo, 0, NV50_EVO_UPDATE, 1);
-	OUT_RING(evo, 0);
-	FIRE_RING(evo);
+	OUT_RING  (evo, 0);
+	FIRE_RING (evo);
 }
 
 static bool
diff --git a/drivers/gpu/drm/nouveau/nv50_dac.c b/drivers/gpu/drm/nouveau/nv50_dac.c
index 1fd9537beff..1bc08596294 100644
--- a/drivers/gpu/drm/nouveau/nv50_dac.c
+++ b/drivers/gpu/drm/nouveau/nv50_dac.c
@@ -37,22 +37,31 @@
 #include "nv50_display.h"
 
 static void
-nv50_dac_disconnect(struct nouveau_encoder *nv_encoder)
+nv50_dac_disconnect(struct drm_encoder *encoder)
 {
-	struct drm_device *dev = to_drm_encoder(nv_encoder)->dev;
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_channel *evo = dev_priv->evo;
 	int ret;
 
+	if (!nv_encoder->crtc)
+		return;
+	nv50_crtc_blank(nouveau_crtc(nv_encoder->crtc), true);
+
 	NV_DEBUG_KMS(dev, "Disconnecting DAC %d\n", nv_encoder->or);
 
-	ret = RING_SPACE(evo, 2);
+	ret = RING_SPACE(evo, 4);
 	if (ret) {
 		NV_ERROR(dev, "no space while disconnecting DAC\n");
 		return;
 	}
 	BEGIN_RING(evo, 0, NV50_EVO_DAC(nv_encoder->or, MODE_CTRL), 1);
-	OUT_RING(evo, 0);
+	OUT_RING  (evo, 0);
+	BEGIN_RING(evo, 0, NV50_EVO_UPDATE, 1);
+	OUT_RING  (evo, 0);
+
+	nv_encoder->crtc = NULL;
 }
 
 static enum drm_connector_status
@@ -213,7 +222,8 @@ nv50_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	uint32_t mode_ctl = 0, mode_ctl2 = 0;
 	int ret;
 
-	NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or);
+	NV_DEBUG_KMS(dev, "or %d type %d crtc %d\n",
+		     nv_encoder->or, nv_encoder->dcb->type, crtc->index);
 
 	nv50_dac_dpms(encoder, DRM_MODE_DPMS_ON);
 
@@ -243,6 +253,14 @@ nv50_dac_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	BEGIN_RING(evo, 0, NV50_EVO_DAC(nv_encoder->or, MODE_CTRL), 2);
 	OUT_RING(evo, mode_ctl);
 	OUT_RING(evo, mode_ctl2);
+
+	nv_encoder->crtc = encoder->crtc;
+}
+
+static struct drm_crtc *
+nv50_dac_crtc_get(struct drm_encoder *encoder)
+{
+	return nouveau_encoder(encoder)->crtc;
 }
 
 static const struct drm_encoder_helper_funcs nv50_dac_helper_funcs = {
@@ -253,7 +271,9 @@ static const struct drm_encoder_helper_funcs nv50_dac_helper_funcs = {
 	.prepare = nv50_dac_prepare,
 	.commit = nv50_dac_commit,
 	.mode_set = nv50_dac_mode_set,
-	.detect = nv50_dac_detect
+	.get_crtc = nv50_dac_crtc_get,
+	.detect = nv50_dac_detect,
+	.disable = nv50_dac_disconnect
 };
 
 static void
@@ -275,14 +295,11 @@ static const struct drm_encoder_funcs nv50_dac_encoder_funcs = {
 };
 
 int
-nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry)
+nv50_dac_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
 	struct nouveau_encoder *nv_encoder;
 	struct drm_encoder *encoder;
 
-	NV_DEBUG_KMS(dev, "\n");
-	NV_INFO(dev, "Detected a DAC output\n");
-
 	nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
 	if (!nv_encoder)
 		return -ENOMEM;
@@ -291,14 +308,14 @@ nv50_dac_create(struct drm_device *dev, struct dcb_entry *entry)
 	nv_encoder->dcb = entry;
 	nv_encoder->or = ffs(entry->or) - 1;
 
-	nv_encoder->disconnect = nv50_dac_disconnect;
-
-	drm_encoder_init(dev, encoder, &nv50_dac_encoder_funcs,
+	drm_encoder_init(connector->dev, encoder, &nv50_dac_encoder_funcs,
 			 DRM_MODE_ENCODER_DAC);
 	drm_encoder_helper_add(encoder, &nv50_dac_helper_funcs);
 
 	encoder->possible_crtcs = entry->heads;
 	encoder->possible_clones = 0;
+
+	drm_mode_connector_attach_encoder(connector, encoder);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 580a5d10be9..f13ad0de9c8 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -71,14 +71,13 @@ nv50_evo_dmaobj_new(struct nouveau_channel *evo, uint32_t class, uint32_t name,
 		return ret;
 	}
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	nv_wo32(dev, obj, 0, (tile_flags << 22) | (magic_flags << 16) | class);
 	nv_wo32(dev, obj, 1, limit);
 	nv_wo32(dev, obj, 2, offset);
 	nv_wo32(dev, obj, 3, 0x00000000);
 	nv_wo32(dev, obj, 4, 0x00000000);
 	nv_wo32(dev, obj, 5, 0x00010000);
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	return 0;
 }
@@ -110,8 +109,8 @@ nv50_evo_channel_new(struct drm_device *dev, struct nouveau_channel **pchan)
 		return ret;
 	}
 
-	ret = nouveau_mem_init_heap(&chan->ramin_heap, chan->ramin->gpuobj->
-				    im_pramin->start, 32768);
+	ret = drm_mm_init(&chan->ramin_heap,
+			  chan->ramin->gpuobj->im_pramin->start, 32768);
 	if (ret) {
 		NV_ERROR(dev, "Error initialising EVO PRAMIN heap: %d\n", ret);
 		nv50_evo_channel_del(pchan);
@@ -179,13 +178,25 @@ nv50_evo_channel_new(struct drm_device *dev, struct nouveau_channel **pchan)
 }
 
 int
+nv50_display_early_init(struct drm_device *dev)
+{
+	return 0;
+}
+
+void
+nv50_display_late_takedown(struct drm_device *dev)
+{
+}
+
+int
 nv50_display_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+	struct nouveau_gpio_engine *pgpio = &dev_priv->engine.gpio;
 	struct nouveau_channel *evo = dev_priv->evo;
 	struct drm_connector *connector;
-	uint32_t val, ram_amount, hpd_en[2];
+	uint32_t val, ram_amount;
 	uint64_t start;
 	int ret, i;
 
@@ -366,26 +377,13 @@ nv50_display_init(struct drm_device *dev)
 					     NV50_PDISPLAY_INTR_EN_CLK_UNK40));
 
 	/* enable hotplug interrupts */
-	hpd_en[0] = hpd_en[1] = 0;
 	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
 		struct nouveau_connector *conn = nouveau_connector(connector);
-		struct dcb_gpio_entry *gpio;
 
 		if (conn->dcb->gpio_tag == 0xff)
 			continue;
 
-		gpio = nouveau_bios_gpio_entry(dev, conn->dcb->gpio_tag);
-		if (!gpio)
-			continue;
-
-		hpd_en[gpio->line >> 4] |= (0x00010001 << (gpio->line & 0xf));
-	}
-
-	nv_wr32(dev, 0xe054, 0xffffffff);
-	nv_wr32(dev, 0xe050, hpd_en[0]);
-	if (dev_priv->chipset >= 0x90) {
-		nv_wr32(dev, 0xe074, 0xffffffff);
-		nv_wr32(dev, 0xe070, hpd_en[1]);
+		pgpio->irq_enable(dev, conn->dcb->gpio_tag, true);
 	}
 
 	return 0;
@@ -465,6 +463,7 @@ int nv50_display_create(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct dcb_table *dcb = &dev_priv->vbios.dcb;
+	struct drm_connector *connector, *ct;
 	int ret, i;
 
 	NV_DEBUG_KMS(dev, "\n");
@@ -507,14 +506,18 @@ int nv50_display_create(struct drm_device *dev)
 			continue;
 		}
 
+		connector = nouveau_connector_create(dev, entry->connector);
+		if (IS_ERR(connector))
+			continue;
+
 		switch (entry->type) {
 		case OUTPUT_TMDS:
 		case OUTPUT_LVDS:
 		case OUTPUT_DP:
-			nv50_sor_create(dev, entry);
+			nv50_sor_create(connector, entry);
 			break;
 		case OUTPUT_ANALOG:
-			nv50_dac_create(dev, entry);
+			nv50_dac_create(connector, entry);
 			break;
 		default:
 			NV_WARN(dev, "DCB encoder %d unknown\n", entry->type);
@@ -522,11 +525,13 @@ int nv50_display_create(struct drm_device *dev)
 		}
 	}
 
-	for (i = 0 ; i < dcb->connector.entries; i++) {
-		if (i != 0 && dcb->connector.entry[i].index2 ==
-			      dcb->connector.entry[i - 1].index2)
-			continue;
-		nouveau_connector_create(dev, &dcb->connector.entry[i]);
+	list_for_each_entry_safe(connector, ct,
+				 &dev->mode_config.connector_list, head) {
+		if (!connector->encoder_ids[0]) {
+			NV_WARN(dev, "%s has no encoders, removing\n",
+				drm_get_connector_name(connector));
+			connector->funcs->destroy(connector);
+		}
 	}
 
 	ret = nv50_display_init(dev);
@@ -538,7 +543,8 @@ int nv50_display_create(struct drm_device *dev)
 	return 0;
 }
 
-int nv50_display_destroy(struct drm_device *dev)
+void
+nv50_display_destroy(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
@@ -548,135 +554,30 @@ int nv50_display_destroy(struct drm_device *dev)
 
 	nv50_display_disable(dev);
 	nv50_evo_channel_del(&dev_priv->evo);
-
-	return 0;
-}
-
-static inline uint32_t
-nv50_display_mode_ctrl(struct drm_device *dev, bool sor, int or)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	uint32_t mc;
-
-	if (sor) {
-		if (dev_priv->chipset < 0x90 ||
-		    dev_priv->chipset == 0x92 || dev_priv->chipset == 0xa0)
-			mc = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_P(or));
-		else
-			mc = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_P(or));
-	} else {
-		mc = nv_rd32(dev, NV50_PDISPLAY_DAC_MODE_CTRL_P(or));
-	}
-
-	return mc;
-}
-
-static int
-nv50_display_irq_head(struct drm_device *dev, int *phead,
-		      struct dcb_entry **pdcbent)
-{
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	uint32_t unk30 = nv_rd32(dev, NV50_PDISPLAY_UNK30_CTRL);
-	uint32_t dac = 0, sor = 0;
-	int head, i, or = 0, type = OUTPUT_ANY;
-
-	/* We're assuming that head 0 *or* head 1 will be active here,
-	 * and not both.  I'm not sure if the hw will even signal both
-	 * ever, but it definitely shouldn't for us as we commit each
-	 * CRTC separately, and submission will be blocked by the GPU
-	 * until we handle each in turn.
-	 */
-	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
-	head = ffs((unk30 >> 9) & 3) - 1;
-	if (head < 0)
-		return -EINVAL;
-
-	/* This assumes CRTCs are never bound to multiple encoders, which
-	 * should be the case.
-	 */
-	for (i = 0; i < 3 && type == OUTPUT_ANY; i++) {
-		uint32_t mc = nv50_display_mode_ctrl(dev, false, i);
-		if (!(mc & (1 << head)))
-			continue;
-
-		switch ((mc >> 8) & 0xf) {
-		case 0: type = OUTPUT_ANALOG; break;
-		case 1: type = OUTPUT_TV; break;
-		default:
-			NV_ERROR(dev, "unknown dac mode_ctrl: 0x%08x\n", dac);
-			return -1;
-		}
-
-		or = i;
-	}
-
-	for (i = 0; i < 4 && type == OUTPUT_ANY; i++) {
-		uint32_t mc = nv50_display_mode_ctrl(dev, true, i);
-		if (!(mc & (1 << head)))
-			continue;
-
-		switch ((mc >> 8) & 0xf) {
-		case 0: type = OUTPUT_LVDS; break;
-		case 1: type = OUTPUT_TMDS; break;
-		case 2: type = OUTPUT_TMDS; break;
-		case 5: type = OUTPUT_TMDS; break;
-		case 8: type = OUTPUT_DP; break;
-		case 9: type = OUTPUT_DP; break;
-		default:
-			NV_ERROR(dev, "unknown sor mode_ctrl: 0x%08x\n", sor);
-			return -1;
-		}
-
-		or = i;
-	}
-
-	NV_DEBUG_KMS(dev, "type %d, or %d\n", type, or);
-	if (type == OUTPUT_ANY) {
-		NV_ERROR(dev, "unknown encoder!!\n");
-		return -1;
-	}
-
-	for (i = 0; i < dev_priv->vbios.dcb.entries; i++) {
-		struct dcb_entry *dcbent = &dev_priv->vbios.dcb.entry[i];
-
-		if (dcbent->type != type)
-			continue;
-
-		if (!(dcbent->or & (1 << or)))
-			continue;
-
-		*phead = head;
-		*pdcbent = dcbent;
-		return 0;
-	}
-
-	NV_ERROR(dev, "no DCB entry for %d %d\n", dac != 0, or);
-	return 0;
 }
 
-static uint32_t
-nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcbent,
-			   int pxclk)
+static u16
+nv50_display_script_select(struct drm_device *dev, struct dcb_entry *dcb,
+			   u32 mc, int pxclk)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_connector *nv_connector = NULL;
 	struct drm_encoder *encoder;
 	struct nvbios *bios = &dev_priv->vbios;
-	uint32_t mc, script = 0, or;
+	u32 script = 0, or;
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 
-		if (nv_encoder->dcb != dcbent)
+		if (nv_encoder->dcb != dcb)
 			continue;
 
 		nv_connector = nouveau_encoder_connector_get(nv_encoder);
 		break;
 	}
 
-	or = ffs(dcbent->or) - 1;
-	mc = nv50_display_mode_ctrl(dev, dcbent->type != OUTPUT_ANALOG, or);
-	switch (dcbent->type) {
+	or = ffs(dcb->or) - 1;
+	switch (dcb->type) {
 	case OUTPUT_LVDS:
 		script = (mc >> 8) & 0xf;
 		if (bios->fp_no_ddc) {
@@ -767,17 +668,88 @@ nv50_display_vblank_handler(struct drm_device *dev, uint32_t intr)
 static void
 nv50_display_unk10_handler(struct drm_device *dev)
 {
-	struct dcb_entry *dcbent;
-	int head, ret;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	u32 unk30 = nv_rd32(dev, 0x610030), mc;
+	int i, crtc, or, type = OUTPUT_ANY;
 
-	ret = nv50_display_irq_head(dev, &head, &dcbent);
-	if (ret)
-		goto ack;
+	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
+	dev_priv->evo_irq.dcb = NULL;
 
 	nv_wr32(dev, 0x619494, nv_rd32(dev, 0x619494) & ~8);
 
-	nouveau_bios_run_display_table(dev, dcbent, 0, -1);
+	/* Determine which CRTC we're dealing with, only 1 ever will be
+	 * signalled at the same time with the current nouveau code.
+	 */
+	crtc = ffs((unk30 & 0x00000060) >> 5) - 1;
+	if (crtc < 0)
+		goto ack;
+
+	/* Nothing needs to be done for the encoder */
+	crtc = ffs((unk30 & 0x00000180) >> 7) - 1;
+	if (crtc < 0)
+		goto ack;
 
+	/* Find which encoder was connected to the CRTC */
+	for (i = 0; type == OUTPUT_ANY && i < 3; i++) {
+		mc = nv_rd32(dev, NV50_PDISPLAY_DAC_MODE_CTRL_C(i));
+		NV_DEBUG_KMS(dev, "DAC-%d mc: 0x%08x\n", i, mc);
+		if (!(mc & (1 << crtc)))
+			continue;
+
+		switch ((mc & 0x00000f00) >> 8) {
+		case 0: type = OUTPUT_ANALOG; break;
+		case 1: type = OUTPUT_TV; break;
+		default:
+			NV_ERROR(dev, "invalid mc, DAC-%d: 0x%08x\n", i, mc);
+			goto ack;
+		}
+
+		or = i;
+	}
+
+	for (i = 0; type == OUTPUT_ANY && i < 4; i++) {
+		if (dev_priv->chipset  < 0x90 ||
+		    dev_priv->chipset == 0x92 ||
+		    dev_priv->chipset == 0xa0)
+			mc = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_C(i));
+		else
+			mc = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_C(i));
+
+		NV_DEBUG_KMS(dev, "SOR-%d mc: 0x%08x\n", i, mc);
+		if (!(mc & (1 << crtc)))
+			continue;
+
+		switch ((mc & 0x00000f00) >> 8) {
+		case 0: type = OUTPUT_LVDS; break;
+		case 1: type = OUTPUT_TMDS; break;
+		case 2: type = OUTPUT_TMDS; break;
+		case 5: type = OUTPUT_TMDS; break;
+		case 8: type = OUTPUT_DP; break;
+		case 9: type = OUTPUT_DP; break;
+		default:
+			NV_ERROR(dev, "invalid mc, SOR-%d: 0x%08x\n", i, mc);
+			goto ack;
+		}
+
+		or = i;
+	}
+
+	/* There was no encoder to disable */
+	if (type == OUTPUT_ANY)
+		goto ack;
+
+	/* Disable the encoder */
+	for (i = 0; i < dev_priv->vbios.dcb.entries; i++) {
+		struct dcb_entry *dcb = &dev_priv->vbios.dcb.entry[i];
+
+		if (dcb->type == type && (dcb->or & (1 << or))) {
+			nouveau_bios_run_display_table(dev, dcb, 0, -1);
+			dev_priv->evo_irq.dcb = dcb;
+			goto ack;
+		}
+	}
+
+	NV_ERROR(dev, "no dcb for %d %d 0x%08x\n", or, type, mc);
 ack:
 	nv_wr32(dev, NV50_PDISPLAY_INTR_1, NV50_PDISPLAY_INTR_1_CLK_UNK10);
 	nv_wr32(dev, 0x610030, 0x80000000);
@@ -817,33 +789,103 @@ nv50_display_unk20_dp_hack(struct drm_device *dev, struct dcb_entry *dcb)
 static void
 nv50_display_unk20_handler(struct drm_device *dev)
 {
-	struct dcb_entry *dcbent;
-	uint32_t tmp, pclk, script;
-	int head, or, ret;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	u32 unk30 = nv_rd32(dev, 0x610030), tmp, pclk, script, mc;
+	struct dcb_entry *dcb;
+	int i, crtc, or, type = OUTPUT_ANY;
 
-	ret = nv50_display_irq_head(dev, &head, &dcbent);
-	if (ret)
+	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
+	dcb = dev_priv->evo_irq.dcb;
+	if (dcb) {
+		nouveau_bios_run_display_table(dev, dcb, 0, -2);
+		dev_priv->evo_irq.dcb = NULL;
+	}
+
+	/* CRTC clock change requested? */
+	crtc = ffs((unk30 & 0x00000600) >> 9) - 1;
+	if (crtc >= 0) {
+		pclk  = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(crtc, CLOCK));
+		pclk &= 0x003fffff;
+
+		nv50_crtc_set_clock(dev, crtc, pclk);
+
+		tmp = nv_rd32(dev, NV50_PDISPLAY_CRTC_CLK_CTRL2(crtc));
+		tmp &= ~0x000000f;
+		nv_wr32(dev, NV50_PDISPLAY_CRTC_CLK_CTRL2(crtc), tmp);
+	}
+
+	/* Nothing needs to be done for the encoder */
+	crtc = ffs((unk30 & 0x00000180) >> 7) - 1;
+	if (crtc < 0)
 		goto ack;
-	or = ffs(dcbent->or) - 1;
-	pclk = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(head, CLOCK)) & 0x3fffff;
-	script = nv50_display_script_select(dev, dcbent, pclk);
+	pclk  = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(crtc, CLOCK)) & 0x003fffff;
 
-	NV_DEBUG_KMS(dev, "head %d pxclk: %dKHz\n", head, pclk);
+	/* Find which encoder is connected to the CRTC */
+	for (i = 0; type == OUTPUT_ANY && i < 3; i++) {
+		mc = nv_rd32(dev, NV50_PDISPLAY_DAC_MODE_CTRL_P(i));
+		NV_DEBUG_KMS(dev, "DAC-%d mc: 0x%08x\n", i, mc);
+		if (!(mc & (1 << crtc)))
+			continue;
 
-	if (dcbent->type != OUTPUT_DP)
-		nouveau_bios_run_display_table(dev, dcbent, 0, -2);
+		switch ((mc & 0x00000f00) >> 8) {
+		case 0: type = OUTPUT_ANALOG; break;
+		case 1: type = OUTPUT_TV; break;
+		default:
+			NV_ERROR(dev, "invalid mc, DAC-%d: 0x%08x\n", i, mc);
+			goto ack;
+		}
 
-	nv50_crtc_set_clock(dev, head, pclk);
+		or = i;
+	}
 
-	nouveau_bios_run_display_table(dev, dcbent, script, pclk);
+	for (i = 0; type == OUTPUT_ANY && i < 4; i++) {
+		if (dev_priv->chipset  < 0x90 ||
+		    dev_priv->chipset == 0x92 ||
+		    dev_priv->chipset == 0xa0)
+			mc = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_P(i));
+		else
+			mc = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_P(i));
 
-	nv50_display_unk20_dp_hack(dev, dcbent);
+		NV_DEBUG_KMS(dev, "SOR-%d mc: 0x%08x\n", i, mc);
+		if (!(mc & (1 << crtc)))
+			continue;
+
+		switch ((mc & 0x00000f00) >> 8) {
+		case 0: type = OUTPUT_LVDS; break;
+		case 1: type = OUTPUT_TMDS; break;
+		case 2: type = OUTPUT_TMDS; break;
+		case 5: type = OUTPUT_TMDS; break;
+		case 8: type = OUTPUT_DP; break;
+		case 9: type = OUTPUT_DP; break;
+		default:
+			NV_ERROR(dev, "invalid mc, SOR-%d: 0x%08x\n", i, mc);
+			goto ack;
+		}
+
+		or = i;
+	}
+
+	if (type == OUTPUT_ANY)
+		goto ack;
+
+	/* Enable the encoder */
+	for (i = 0; i < dev_priv->vbios.dcb.entries; i++) {
+		dcb = &dev_priv->vbios.dcb.entry[i];
+		if (dcb->type == type && (dcb->or & (1 << or)))
+			break;
+	}
+
+	if (i == dev_priv->vbios.dcb.entries) {
+		NV_ERROR(dev, "no dcb for %d %d 0x%08x\n", or, type, mc);
+		goto ack;
+	}
 
-	tmp = nv_rd32(dev, NV50_PDISPLAY_CRTC_CLK_CTRL2(head));
-	tmp &= ~0x000000f;
-	nv_wr32(dev, NV50_PDISPLAY_CRTC_CLK_CTRL2(head), tmp);
+	script = nv50_display_script_select(dev, dcb, mc, pclk);
+	nouveau_bios_run_display_table(dev, dcb, script, pclk);
 
-	if (dcbent->type != OUTPUT_ANALOG) {
+	nv50_display_unk20_dp_hack(dev, dcb);
+
+	if (dcb->type != OUTPUT_ANALOG) {
 		tmp = nv_rd32(dev, NV50_PDISPLAY_SOR_CLK_CTRL2(or));
 		tmp &= ~0x00000f0f;
 		if (script & 0x0100)
@@ -853,24 +895,61 @@ nv50_display_unk20_handler(struct drm_device *dev)
 		nv_wr32(dev, NV50_PDISPLAY_DAC_CLK_CTRL2(or), 0);
 	}
 
+	dev_priv->evo_irq.dcb = dcb;
+	dev_priv->evo_irq.pclk = pclk;
+	dev_priv->evo_irq.script = script;
+
 ack:
 	nv_wr32(dev, NV50_PDISPLAY_INTR_1, NV50_PDISPLAY_INTR_1_CLK_UNK20);
 	nv_wr32(dev, 0x610030, 0x80000000);
 }
 
+/* If programming a TMDS output on a SOR that can also be configured for
+ * DisplayPort, make sure NV50_SOR_DP_CTRL_ENABLE is forced off.
+ *
+ * It looks like the VBIOS TMDS scripts make an attempt at this, however,
+ * the VBIOS scripts on at least one board I have only switch it off on
+ * link 0, causing a blank display if the output has previously been
+ * programmed for DisplayPort.
+ */
+static void
+nv50_display_unk40_dp_set_tmds(struct drm_device *dev, struct dcb_entry *dcb)
+{
+	int or = ffs(dcb->or) - 1, link = !(dcb->dpconf.sor.link & 1);
+	struct drm_encoder *encoder;
+	u32 tmp;
+
+	if (dcb->type != OUTPUT_TMDS)
+		return;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+
+		if (nv_encoder->dcb->type == OUTPUT_DP &&
+		    nv_encoder->dcb->or & (1 << or)) {
+			tmp  = nv_rd32(dev, NV50_SOR_DP_CTRL(or, link));
+			tmp &= ~NV50_SOR_DP_CTRL_ENABLED;
+			nv_wr32(dev, NV50_SOR_DP_CTRL(or, link), tmp);
+			break;
+		}
+	}
+}
+
 static void
 nv50_display_unk40_handler(struct drm_device *dev)
 {
-	struct dcb_entry *dcbent;
-	int head, pclk, script, ret;
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct dcb_entry *dcb = dev_priv->evo_irq.dcb;
+	u16 script = dev_priv->evo_irq.script;
+	u32 unk30 = nv_rd32(dev, 0x610030), pclk = dev_priv->evo_irq.pclk;
 
-	ret = nv50_display_irq_head(dev, &head, &dcbent);
-	if (ret)
+	NV_DEBUG_KMS(dev, "0x610030: 0x%08x\n", unk30);
+	dev_priv->evo_irq.dcb = NULL;
+	if (!dcb)
 		goto ack;
-	pclk = nv_rd32(dev, NV50_PDISPLAY_CRTC_P(head, CLOCK)) & 0x3fffff;
-	script = nv50_display_script_select(dev, dcbent, pclk);
 
-	nouveau_bios_run_display_table(dev, dcbent, script, -pclk);
+	nouveau_bios_run_display_table(dev, dcb, script, -pclk);
+	nv50_display_unk40_dp_set_tmds(dev, dcb);
 
 ack:
 	nv_wr32(dev, NV50_PDISPLAY_INTR_1, NV50_PDISPLAY_INTR_1_CLK_UNK40);
diff --git a/drivers/gpu/drm/nouveau/nv50_display.h b/drivers/gpu/drm/nouveau/nv50_display.h
index 581d405ac01..c551f0b85ee 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.h
+++ b/drivers/gpu/drm/nouveau/nv50_display.h
@@ -38,9 +38,11 @@
 void nv50_display_irq_handler(struct drm_device *dev);
 void nv50_display_irq_handler_bh(struct work_struct *work);
 void nv50_display_irq_hotplug_bh(struct work_struct *work);
-int nv50_display_init(struct drm_device *dev);
+int nv50_display_early_init(struct drm_device *dev);
+void nv50_display_late_takedown(struct drm_device *dev);
 int nv50_display_create(struct drm_device *dev);
-int nv50_display_destroy(struct drm_device *dev);
+int nv50_display_init(struct drm_device *dev);
+void nv50_display_destroy(struct drm_device *dev);
 int nv50_crtc_blank(struct nouveau_crtc *, bool blank);
 int nv50_crtc_set_clock(struct drm_device *, int head, int pclk);
 
diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c
index e20c0e2474f..fb0281ae8f9 100644
--- a/drivers/gpu/drm/nouveau/nv50_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv50_fifo.c
@@ -28,41 +28,33 @@
 #include "drm.h"
 #include "nouveau_drv.h"
 
-struct nv50_fifo_priv {
-	struct nouveau_gpuobj_ref *thingo[2];
-	int cur_thingo;
-};
-
-#define IS_G80 ((dev_priv->chipset & 0xf0) == 0x50)
-
 static void
-nv50_fifo_init_thingo(struct drm_device *dev)
+nv50_fifo_playlist_update(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nv50_fifo_priv *priv = dev_priv->engine.fifo.priv;
+	struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
 	struct nouveau_gpuobj_ref *cur;
 	int i, nr;
 
 	NV_DEBUG(dev, "\n");
 
-	cur = priv->thingo[priv->cur_thingo];
-	priv->cur_thingo = !priv->cur_thingo;
+	cur = pfifo->playlist[pfifo->cur_playlist];
+	pfifo->cur_playlist = !pfifo->cur_playlist;
 
 	/* We never schedule channel 0 or 127 */
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	for (i = 1, nr = 0; i < 127; i++) {
 		if (dev_priv->fifos[i] && dev_priv->fifos[i]->ramfc)
 			nv_wo32(dev, cur->gpuobj, nr++, i);
 	}
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	nv_wr32(dev, 0x32f4, cur->instance >> 12);
 	nv_wr32(dev, 0x32ec, nr);
 	nv_wr32(dev, 0x2500, 0x101);
 }
 
-static int
-nv50_fifo_channel_enable(struct drm_device *dev, int channel, bool nt)
+static void
+nv50_fifo_channel_enable(struct drm_device *dev, int channel)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_channel *chan = dev_priv->fifos[channel];
@@ -70,37 +62,28 @@ nv50_fifo_channel_enable(struct drm_device *dev, int channel, bool nt)
 
 	NV_DEBUG(dev, "ch%d\n", channel);
 
-	if (!chan->ramfc)
-		return -EINVAL;
-
-	if (IS_G80)
+	if (dev_priv->chipset == 0x50)
 		inst = chan->ramfc->instance >> 12;
 	else
 		inst = chan->ramfc->instance >> 8;
-	nv_wr32(dev, NV50_PFIFO_CTX_TABLE(channel),
-		 inst | NV50_PFIFO_CTX_TABLE_CHANNEL_ENABLED);
 
-	if (!nt)
-		nv50_fifo_init_thingo(dev);
-	return 0;
+	nv_wr32(dev, NV50_PFIFO_CTX_TABLE(channel), inst |
+		     NV50_PFIFO_CTX_TABLE_CHANNEL_ENABLED);
 }
 
 static void
-nv50_fifo_channel_disable(struct drm_device *dev, int channel, bool nt)
+nv50_fifo_channel_disable(struct drm_device *dev, int channel)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	uint32_t inst;
 
-	NV_DEBUG(dev, "ch%d, nt=%d\n", channel, nt);
+	NV_DEBUG(dev, "ch%d\n", channel);
 
-	if (IS_G80)
+	if (dev_priv->chipset == 0x50)
 		inst = NV50_PFIFO_CTX_TABLE_INSTANCE_MASK_G80;
 	else
 		inst = NV50_PFIFO_CTX_TABLE_INSTANCE_MASK_G84;
 	nv_wr32(dev, NV50_PFIFO_CTX_TABLE(channel), inst);
-
-	if (!nt)
-		nv50_fifo_init_thingo(dev);
 }
 
 static void
@@ -133,12 +116,12 @@ nv50_fifo_init_context_table(struct drm_device *dev)
 
 	for (i = 0; i < NV50_PFIFO_CTX_TABLE__SIZE; i++) {
 		if (dev_priv->fifos[i])
-			nv50_fifo_channel_enable(dev, i, true);
+			nv50_fifo_channel_enable(dev, i);
 		else
-			nv50_fifo_channel_disable(dev, i, true);
+			nv50_fifo_channel_disable(dev, i);
 	}
 
-	nv50_fifo_init_thingo(dev);
+	nv50_fifo_playlist_update(dev);
 }
 
 static void
@@ -162,41 +145,38 @@ nv50_fifo_init_regs(struct drm_device *dev)
 	nv_wr32(dev, 0x3270, 0);
 
 	/* Enable dummy channels setup by nv50_instmem.c */
-	nv50_fifo_channel_enable(dev, 0, true);
-	nv50_fifo_channel_enable(dev, 127, true);
+	nv50_fifo_channel_enable(dev, 0);
+	nv50_fifo_channel_enable(dev, 127);
 }
 
 int
 nv50_fifo_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nv50_fifo_priv *priv;
+	struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
 	int ret;
 
 	NV_DEBUG(dev, "\n");
 
-	priv = dev_priv->engine.fifo.priv;
-	if (priv) {
-		priv->cur_thingo = !priv->cur_thingo;
+	if (pfifo->playlist[0]) {
+		pfifo->cur_playlist = !pfifo->cur_playlist;
 		goto just_reset;
 	}
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	dev_priv->engine.fifo.priv = priv;
-
 	ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0, 128*4, 0x1000,
-				     NVOBJ_FLAG_ZERO_ALLOC, &priv->thingo[0]);
+				     NVOBJ_FLAG_ZERO_ALLOC,
+				     &pfifo->playlist[0]);
 	if (ret) {
-		NV_ERROR(dev, "error creating thingo0: %d\n", ret);
+		NV_ERROR(dev, "error creating playlist 0: %d\n", ret);
 		return ret;
 	}
 
 	ret = nouveau_gpuobj_new_ref(dev, NULL, NULL, 0, 128*4, 0x1000,
-				     NVOBJ_FLAG_ZERO_ALLOC, &priv->thingo[1]);
+				     NVOBJ_FLAG_ZERO_ALLOC,
+				     &pfifo->playlist[1]);
 	if (ret) {
-		NV_ERROR(dev, "error creating thingo1: %d\n", ret);
+		nouveau_gpuobj_ref_del(dev, &pfifo->playlist[0]);
+		NV_ERROR(dev, "error creating playlist 1: %d\n", ret);
 		return ret;
 	}
 
@@ -216,18 +196,15 @@ void
 nv50_fifo_takedown(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nv50_fifo_priv *priv = dev_priv->engine.fifo.priv;
+	struct nouveau_fifo_engine *pfifo = &dev_priv->engine.fifo;
 
 	NV_DEBUG(dev, "\n");
 
-	if (!priv)
+	if (!pfifo->playlist[0])
 		return;
 
-	nouveau_gpuobj_ref_del(dev, &priv->thingo[0]);
-	nouveau_gpuobj_ref_del(dev, &priv->thingo[1]);
-
-	dev_priv->engine.fifo.priv = NULL;
-	kfree(priv);
+	nouveau_gpuobj_ref_del(dev, &pfifo->playlist[0]);
+	nouveau_gpuobj_ref_del(dev, &pfifo->playlist[1]);
 }
 
 int
@@ -248,7 +225,7 @@ nv50_fifo_create_context(struct nouveau_channel *chan)
 
 	NV_DEBUG(dev, "ch%d\n", chan->id);
 
-	if (IS_G80) {
+	if (dev_priv->chipset == 0x50) {
 		uint32_t ramin_poffset = chan->ramin->gpuobj->im_pramin->start;
 		uint32_t ramin_voffset = chan->ramin->gpuobj->im_backing_start;
 
@@ -281,10 +258,10 @@ nv50_fifo_create_context(struct nouveau_channel *chan)
 
 	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
-
 	nv_wo32(dev, ramfc, 0x48/4, chan->pushbuf->instance >> 4);
-	nv_wo32(dev, ramfc, 0x80/4, (0xc << 24) | (chan->ramht->instance >> 4));
+	nv_wo32(dev, ramfc, 0x80/4, (0 << 27) /* 4KiB */ |
+				    (4 << 24) /* SEARCH_FULL */ |
+				    (chan->ramht->instance >> 4));
 	nv_wo32(dev, ramfc, 0x44/4, 0x2101ffff);
 	nv_wo32(dev, ramfc, 0x60/4, 0x7fffffff);
 	nv_wo32(dev, ramfc, 0x40/4, 0x00000000);
@@ -295,7 +272,7 @@ nv50_fifo_create_context(struct nouveau_channel *chan)
 				    chan->dma.ib_base * 4);
 	nv_wo32(dev, ramfc, 0x54/4, drm_order(chan->dma.ib_max + 1) << 16);
 
-	if (!IS_G80) {
+	if (dev_priv->chipset != 0x50) {
 		nv_wo32(dev, chan->ramin->gpuobj, 0, chan->id);
 		nv_wo32(dev, chan->ramin->gpuobj, 1,
 						chan->ramfc->instance >> 8);
@@ -304,16 +281,10 @@ nv50_fifo_create_context(struct nouveau_channel *chan)
 		nv_wo32(dev, ramfc, 0x98/4, chan->ramin->instance >> 12);
 	}
 
-	dev_priv->engine.instmem.finish_access(dev);
-
-	ret = nv50_fifo_channel_enable(dev, chan->id, false);
-	if (ret) {
-		NV_ERROR(dev, "error enabling ch%d: %d\n", chan->id, ret);
-		spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
-		nouveau_gpuobj_ref_del(dev, &chan->ramfc);
-		return ret;
-	}
+	dev_priv->engine.instmem.flush(dev);
 
+	nv50_fifo_channel_enable(dev, chan->id);
+	nv50_fifo_playlist_update(dev);
 	spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
 	return 0;
 }
@@ -328,11 +299,12 @@ nv50_fifo_destroy_context(struct nouveau_channel *chan)
 
 	/* This will ensure the channel is seen as disabled. */
 	chan->ramfc = NULL;
-	nv50_fifo_channel_disable(dev, chan->id, false);
+	nv50_fifo_channel_disable(dev, chan->id);
 
 	/* Dummy channel, also used on ch 127 */
 	if (chan->id == 0)
-		nv50_fifo_channel_disable(dev, 127, false);
+		nv50_fifo_channel_disable(dev, 127);
+	nv50_fifo_playlist_update(dev);
 
 	nouveau_gpuobj_ref_del(dev, &ramfc);
 	nouveau_gpuobj_ref_del(dev, &chan->cache);
@@ -349,8 +321,6 @@ nv50_fifo_load_context(struct nouveau_channel *chan)
 
 	NV_DEBUG(dev, "ch%d\n", chan->id);
 
-	dev_priv->engine.instmem.prepare_access(dev, false);
-
 	nv_wr32(dev, 0x3330, nv_ro32(dev, ramfc, 0x00/4));
 	nv_wr32(dev, 0x3334, nv_ro32(dev, ramfc, 0x04/4));
 	nv_wr32(dev, 0x3240, nv_ro32(dev, ramfc, 0x08/4));
@@ -396,7 +366,7 @@ nv50_fifo_load_context(struct nouveau_channel *chan)
 	nv_wr32(dev, NV03_PFIFO_CACHE1_GET, 0);
 
 	/* guessing that all the 0x34xx regs aren't on NV50 */
-	if (!IS_G80) {
+	if (dev_priv->chipset != 0x50) {
 		nv_wr32(dev, 0x340c, nv_ro32(dev, ramfc, 0x88/4));
 		nv_wr32(dev, 0x3400, nv_ro32(dev, ramfc, 0x8c/4));
 		nv_wr32(dev, 0x3404, nv_ro32(dev, ramfc, 0x90/4));
@@ -404,8 +374,6 @@ nv50_fifo_load_context(struct nouveau_channel *chan)
 		nv_wr32(dev, 0x3410, nv_ro32(dev, ramfc, 0x98/4));
 	}
 
-	dev_priv->engine.instmem.finish_access(dev);
-
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, chan->id | (1<<16));
 	return 0;
 }
@@ -434,8 +402,6 @@ nv50_fifo_unload_context(struct drm_device *dev)
 	ramfc = chan->ramfc->gpuobj;
 	cache = chan->cache->gpuobj;
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
-
 	nv_wo32(dev, ramfc, 0x00/4, nv_rd32(dev, 0x3330));
 	nv_wo32(dev, ramfc, 0x04/4, nv_rd32(dev, 0x3334));
 	nv_wo32(dev, ramfc, 0x08/4, nv_rd32(dev, 0x3240));
@@ -482,7 +448,7 @@ nv50_fifo_unload_context(struct drm_device *dev)
 	}
 
 	/* guessing that all the 0x34xx regs aren't on NV50 */
-	if (!IS_G80) {
+	if (dev_priv->chipset != 0x50) {
 		nv_wo32(dev, ramfc, 0x84/4, ptr >> 1);
 		nv_wo32(dev, ramfc, 0x88/4, nv_rd32(dev, 0x340c));
 		nv_wo32(dev, ramfc, 0x8c/4, nv_rd32(dev, 0x3400));
@@ -491,7 +457,7 @@ nv50_fifo_unload_context(struct drm_device *dev)
 		nv_wo32(dev, ramfc, 0x98/4, nv_rd32(dev, 0x3410));
 	}
 
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	/*XXX: probably reload ch127 (NULL) state back too */
 	nv_wr32(dev, NV03_PFIFO_CACHE1_PUSH1, 127);
diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c
index bb47ad73726..b2fab2bf3d6 100644
--- a/drivers/gpu/drm/nouveau/nv50_gpio.c
+++ b/drivers/gpu/drm/nouveau/nv50_gpio.c
@@ -74,3 +74,38 @@ nv50_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state)
 	nv_wr32(dev, r, v);
 	return 0;
 }
+
+void
+nv50_gpio_irq_enable(struct drm_device *dev, enum dcb_gpio_tag tag, bool on)
+{
+	struct dcb_gpio_entry *gpio;
+	u32 reg, mask;
+
+	gpio = nouveau_bios_gpio_entry(dev, tag);
+	if (!gpio) {
+		NV_ERROR(dev, "gpio tag 0x%02x not found\n", tag);
+		return;
+	}
+
+	reg  = gpio->line < 16 ? 0xe050 : 0xe070;
+	mask = 0x00010001 << (gpio->line & 0xf);
+
+	nv_wr32(dev, reg + 4, mask);
+	nv_mask(dev, reg + 0, mask, on ? mask : 0);
+}
+
+int
+nv50_gpio_init(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	/* disable, and ack any pending gpio interrupts */
+	nv_wr32(dev, 0xe050, 0x00000000);
+	nv_wr32(dev, 0xe054, 0xffffffff);
+	if (dev_priv->chipset >= 0x90) {
+		nv_wr32(dev, 0xe070, 0x00000000);
+		nv_wr32(dev, 0xe074, 0xffffffff);
+	}
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index b203d06f601..1413028e158 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -30,8 +30,6 @@
 
 #include "nouveau_grctx.h"
 
-#define IS_G80 ((dev_priv->chipset & 0xf0) == 0x50)
-
 static void
 nv50_graph_init_reset(struct drm_device *dev)
 {
@@ -103,37 +101,33 @@ static int
 nv50_graph_init_ctxctl(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_grctx ctx = {};
+	uint32_t *cp;
+	int i;
 
 	NV_DEBUG(dev, "\n");
 
-	if (nouveau_ctxfw) {
-		nouveau_grctx_prog_load(dev);
-		dev_priv->engine.graph.grctx_size = 0x70000;
+	cp = kmalloc(512 * 4, GFP_KERNEL);
+	if (!cp) {
+		NV_ERROR(dev, "failed to allocate ctxprog\n");
+		dev_priv->engine.graph.accel_blocked = true;
+		return 0;
 	}
-	if (!dev_priv->engine.graph.ctxprog) {
-		struct nouveau_grctx ctx = {};
-		uint32_t *cp = kmalloc(512 * 4, GFP_KERNEL);
-		int i;
-		if (!cp) {
-			NV_ERROR(dev, "Couldn't alloc ctxprog! Disabling acceleration.\n");
-			dev_priv->engine.graph.accel_blocked = true;
-			return 0;
-		}
-		ctx.dev = dev;
-		ctx.mode = NOUVEAU_GRCTX_PROG;
-		ctx.data = cp;
-		ctx.ctxprog_max = 512;
-		if (!nv50_grctx_init(&ctx)) {
-			dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4;
-
-			nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
-			for (i = 0; i < ctx.ctxprog_len; i++)
-				nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]);
-		} else {
-			dev_priv->engine.graph.accel_blocked = true;
-		}
-		kfree(cp);
+
+	ctx.dev = dev;
+	ctx.mode = NOUVEAU_GRCTX_PROG;
+	ctx.data = cp;
+	ctx.ctxprog_max = 512;
+	if (!nv50_grctx_init(&ctx)) {
+		dev_priv->engine.graph.grctx_size = ctx.ctxvals_pos * 4;
+
+		nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_INDEX, 0);
+		for (i = 0; i < ctx.ctxprog_len; i++)
+			nv_wr32(dev, NV40_PGRAPH_CTXCTL_UCODE_DATA, cp[i]);
+	} else {
+		dev_priv->engine.graph.accel_blocked = true;
 	}
+	kfree(cp);
 
 	nv_wr32(dev, 0x400320, 4);
 	nv_wr32(dev, NV40_PGRAPH_CTXCTL_CUR, 0);
@@ -164,7 +158,6 @@ void
 nv50_graph_takedown(struct drm_device *dev)
 {
 	NV_DEBUG(dev, "\n");
-	nouveau_grctx_fini(dev);
 }
 
 void
@@ -212,8 +205,9 @@ nv50_graph_create_context(struct nouveau_channel *chan)
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_gpuobj *ramin = chan->ramin->gpuobj;
-	struct nouveau_gpuobj *ctx;
+	struct nouveau_gpuobj *obj;
 	struct nouveau_pgraph_engine *pgraph = &dev_priv->engine.graph;
+	struct nouveau_grctx ctx = {};
 	int hdr, ret;
 
 	NV_DEBUG(dev, "ch%d\n", chan->id);
@@ -223,10 +217,9 @@ nv50_graph_create_context(struct nouveau_channel *chan)
 				     NVOBJ_FLAG_ZERO_FREE, &chan->ramin_grctx);
 	if (ret)
 		return ret;
-	ctx = chan->ramin_grctx->gpuobj;
+	obj = chan->ramin_grctx->gpuobj;
 
-	hdr = IS_G80 ? 0x200 : 0x20;
-	dev_priv->engine.instmem.prepare_access(dev, true);
+	hdr = (dev_priv->chipset == 0x50) ? 0x200 : 0x20;
 	nv_wo32(dev, ramin, (hdr + 0x00)/4, 0x00190002);
 	nv_wo32(dev, ramin, (hdr + 0x04)/4, chan->ramin_grctx->instance +
 					   pgraph->grctx_size - 1);
@@ -234,21 +227,15 @@ nv50_graph_create_context(struct nouveau_channel *chan)
 	nv_wo32(dev, ramin, (hdr + 0x0c)/4, 0);
 	nv_wo32(dev, ramin, (hdr + 0x10)/4, 0);
 	nv_wo32(dev, ramin, (hdr + 0x14)/4, 0x00010000);
-	dev_priv->engine.instmem.finish_access(dev);
-
-	dev_priv->engine.instmem.prepare_access(dev, true);
-	if (!pgraph->ctxprog) {
-		struct nouveau_grctx ctx = {};
-		ctx.dev = chan->dev;
-		ctx.mode = NOUVEAU_GRCTX_VALS;
-		ctx.data = chan->ramin_grctx->gpuobj;
-		nv50_grctx_init(&ctx);
-	} else {
-		nouveau_grctx_vals_load(dev, ctx);
-	}
-	nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12);
-	dev_priv->engine.instmem.finish_access(dev);
 
+	ctx.dev = chan->dev;
+	ctx.mode = NOUVEAU_GRCTX_VALS;
+	ctx.data = obj;
+	nv50_grctx_init(&ctx);
+
+	nv_wo32(dev, obj, 0x00000/4, chan->ramin->instance >> 12);
+
+	dev_priv->engine.instmem.flush(dev);
 	return 0;
 }
 
@@ -257,17 +244,16 @@ nv50_graph_destroy_context(struct nouveau_channel *chan)
 {
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	int i, hdr = IS_G80 ? 0x200 : 0x20;
+	int i, hdr = (dev_priv->chipset == 0x50) ? 0x200 : 0x20;
 
 	NV_DEBUG(dev, "ch%d\n", chan->id);
 
 	if (!chan->ramin || !chan->ramin->gpuobj)
 		return;
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	for (i = hdr; i < hdr + 24; i += 4)
 		nv_wo32(dev, chan->ramin->gpuobj, i/4, 0);
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	nouveau_gpuobj_ref_del(dev, &chan->ramin_grctx);
 }
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index 5f21df31f3a..37c7b48ab24 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -35,8 +35,6 @@ struct nv50_instmem_priv {
 	struct nouveau_gpuobj_ref *pramin_pt;
 	struct nouveau_gpuobj_ref *pramin_bar;
 	struct nouveau_gpuobj_ref *fb_bar;
-
-	bool last_access_wr;
 };
 
 #define NV50_INSTMEM_PAGE_SHIFT 12
@@ -147,7 +145,7 @@ nv50_instmem_init(struct drm_device *dev)
 	if (ret)
 		return ret;
 
-	if (nouveau_mem_init_heap(&chan->ramin_heap, c_base, c_size - c_base))
+	if (drm_mm_init(&chan->ramin_heap, c_base, c_size - c_base))
 		return -ENOMEM;
 
 	/* RAMFC + zero channel's PRAMIN up to start of VM pagedir */
@@ -241,7 +239,7 @@ nv50_instmem_init(struct drm_device *dev)
 		return ret;
 	BAR0_WI32(priv->fb_bar->gpuobj, 0x00, 0x7fc00000);
 	BAR0_WI32(priv->fb_bar->gpuobj, 0x04, 0x40000000 +
-					      drm_get_resource_len(dev, 1) - 1);
+					      pci_resource_len(dev->pdev, 1) - 1);
 	BAR0_WI32(priv->fb_bar->gpuobj, 0x08, 0x40000000);
 	BAR0_WI32(priv->fb_bar->gpuobj, 0x0c, 0x00000000);
 	BAR0_WI32(priv->fb_bar->gpuobj, 0x10, 0x00000000);
@@ -262,23 +260,18 @@ nv50_instmem_init(struct drm_device *dev)
 
 	/* Assume that praying isn't enough, check that we can re-read the
 	 * entire fake channel back from the PRAMIN BAR */
-	dev_priv->engine.instmem.prepare_access(dev, false);
 	for (i = 0; i < c_size; i += 4) {
 		if (nv_rd32(dev, NV_RAMIN + i) != nv_ri32(dev, i)) {
 			NV_ERROR(dev, "Error reading back PRAMIN at 0x%08x\n",
 									i);
-			dev_priv->engine.instmem.finish_access(dev);
 			return -EINVAL;
 		}
 	}
-	dev_priv->engine.instmem.finish_access(dev);
 
 	nv_wr32(dev, NV50_PUNK_BAR0_PRAMIN, save_nv001700);
 
 	/* Global PRAMIN heap */
-	if (nouveau_mem_init_heap(&dev_priv->ramin_heap,
-				  c_size, dev_priv->ramin_size - c_size)) {
-		dev_priv->ramin_heap = NULL;
+	if (drm_mm_init(&dev_priv->ramin_heap, c_size, dev_priv->ramin_size - c_size)) {
 		NV_ERROR(dev, "Failed to init RAMIN heap\n");
 	}
 
@@ -321,7 +314,7 @@ nv50_instmem_takedown(struct drm_device *dev)
 		nouveau_gpuobj_del(dev, &chan->vm_pd);
 		nouveau_gpuobj_ref_del(dev, &chan->ramfc);
 		nouveau_gpuobj_ref_del(dev, &chan->ramin);
-		nouveau_mem_takedown(&chan->ramin_heap);
+		drm_mm_takedown(&chan->ramin_heap);
 
 		dev_priv->fifos[0] = dev_priv->fifos[127] = NULL;
 		kfree(chan);
@@ -436,14 +429,14 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 	if (!gpuobj->im_backing || !gpuobj->im_pramin || gpuobj->im_bound)
 		return -EINVAL;
 
-	NV_DEBUG(dev, "st=0x%0llx sz=0x%0llx\n",
+	NV_DEBUG(dev, "st=0x%lx sz=0x%lx\n",
 		 gpuobj->im_pramin->start, gpuobj->im_pramin->size);
 
 	pte     = (gpuobj->im_pramin->start >> 12) << 1;
 	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 	vram    = gpuobj->im_backing_start;
 
-	NV_DEBUG(dev, "pramin=0x%llx, pte=%d, pte_end=%d\n",
+	NV_DEBUG(dev, "pramin=0x%lx, pte=%d, pte_end=%d\n",
 		 gpuobj->im_pramin->start, pte, pte_end);
 	NV_DEBUG(dev, "first vram page: 0x%08x\n", gpuobj->im_backing_start);
 
@@ -453,27 +446,15 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 		vram |= 0x30;
 	}
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
 		nv_wo32(dev, pramin_pt, pte++, lower_32_bits(vram));
 		nv_wo32(dev, pramin_pt, pte++, upper_32_bits(vram));
 		vram += NV50_INSTMEM_PAGE_SIZE;
 	}
-	dev_priv->engine.instmem.finish_access(dev);
-
-	nv_wr32(dev, 0x100c80, 0x00040001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (1)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
+	dev_priv->engine.instmem.flush(dev);
 
-	nv_wr32(dev, 0x100c80, 0x00060001);
-	if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
-		NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
-		NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
-		return -EBUSY;
-	}
+	nv50_vm_flush(dev, 4);
+	nv50_vm_flush(dev, 6);
 
 	gpuobj->im_bound = 1;
 	return 0;
@@ -492,36 +473,37 @@ nv50_instmem_unbind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 	pte     = (gpuobj->im_pramin->start >> 12) << 1;
 	pte_end = ((gpuobj->im_pramin->size >> 12) << 1) + pte;
 
-	dev_priv->engine.instmem.prepare_access(dev, true);
 	while (pte < pte_end) {
 		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
 		nv_wo32(dev, priv->pramin_pt->gpuobj, pte++, 0x00000000);
 	}
-	dev_priv->engine.instmem.finish_access(dev);
+	dev_priv->engine.instmem.flush(dev);
 
 	gpuobj->im_bound = 0;
 	return 0;
 }
 
 void
-nv50_instmem_prepare_access(struct drm_device *dev, bool write)
+nv50_instmem_flush(struct drm_device *dev)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
-
-	priv->last_access_wr = write;
+	nv_wr32(dev, 0x00330c, 0x00000001);
+	if (!nv_wait(0x00330c, 0x00000002, 0x00000000))
+		NV_ERROR(dev, "PRAMIN flush timeout\n");
 }
 
 void
-nv50_instmem_finish_access(struct drm_device *dev)
+nv84_instmem_flush(struct drm_device *dev)
 {
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct nv50_instmem_priv *priv = dev_priv->engine.instmem.priv;
+	nv_wr32(dev, 0x070000, 0x00000001);
+	if (!nv_wait(0x070000, 0x00000002, 0x00000000))
+		NV_ERROR(dev, "PRAMIN flush timeout\n");
+}
 
-	if (priv->last_access_wr) {
-		nv_wr32(dev, 0x070000, 0x00000001);
-		if (!nv_wait(0x070000, 0x00000001, 0x00000000))
-			NV_ERROR(dev, "PRAMIN flush timeout\n");
-	}
+void
+nv50_vm_flush(struct drm_device *dev, int engine)
+{
+	nv_wr32(dev, 0x100c80, (engine << 16) | 1);
+	if (!nv_wait(0x100c80, 0x00000001, 0x00000000))
+		NV_ERROR(dev, "vm flush timeout: engine %d\n", engine);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv50_sor.c b/drivers/gpu/drm/nouveau/nv50_sor.c
index 812778db76a..bcd4cf84a7e 100644
--- a/drivers/gpu/drm/nouveau/nv50_sor.c
+++ b/drivers/gpu/drm/nouveau/nv50_sor.c
@@ -37,52 +37,32 @@
 #include "nv50_display.h"
 
 static void
-nv50_sor_disconnect(struct nouveau_encoder *nv_encoder)
+nv50_sor_disconnect(struct drm_encoder *encoder)
 {
-	struct drm_device *dev = to_drm_encoder(nv_encoder)->dev;
+	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
+	struct drm_device *dev = encoder->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_channel *evo = dev_priv->evo;
 	int ret;
 
+	if (!nv_encoder->crtc)
+		return;
+	nv50_crtc_blank(nouveau_crtc(nv_encoder->crtc), true);
+
 	NV_DEBUG_KMS(dev, "Disconnecting SOR %d\n", nv_encoder->or);
 
-	ret = RING_SPACE(evo, 2);
+	ret = RING_SPACE(evo, 4);
 	if (ret) {
 		NV_ERROR(dev, "no space while disconnecting SOR\n");
 		return;
 	}
 	BEGIN_RING(evo, 0, NV50_EVO_SOR(nv_encoder->or, MODE_CTRL), 1);
-	OUT_RING(evo, 0);
-}
-
-static void
-nv50_sor_dp_link_train(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
-	struct bit_displayport_encoder_table *dpe;
-	int dpe_headerlen;
-
-	dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
-	if (!dpe) {
-		NV_ERROR(dev, "SOR-%d: no DP encoder table!\n", nv_encoder->or);
-		return;
-	}
+	OUT_RING  (evo, 0);
+	BEGIN_RING(evo, 0, NV50_EVO_UPDATE, 1);
+	OUT_RING  (evo, 0);
 
-	if (dpe->script0) {
-		NV_DEBUG_KMS(dev, "SOR-%d: running DP script 0\n", nv_encoder->or);
-		nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script0),
-					    nv_encoder->dcb);
-	}
-
-	if (!nouveau_dp_link_train(encoder))
-		NV_ERROR(dev, "SOR-%d: link training failed\n", nv_encoder->or);
-
-	if (dpe->script1) {
-		NV_DEBUG_KMS(dev, "SOR-%d: running DP script 1\n", nv_encoder->or);
-		nouveau_bios_run_init_table(dev, le16_to_cpu(dpe->script1),
-					    nv_encoder->dcb);
-	}
+	nv_encoder->crtc = NULL;
+	nv_encoder->last_dpms = DRM_MODE_DPMS_OFF;
 }
 
 static void
@@ -94,14 +74,16 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode)
 	uint32_t val;
 	int or = nv_encoder->or;
 
-	NV_DEBUG_KMS(dev, "or %d mode %d\n", or, mode);
+	NV_DEBUG_KMS(dev, "or %d type %d mode %d\n", or, nv_encoder->dcb->type, mode);
 
 	nv_encoder->last_dpms = mode;
 	list_for_each_entry(enc, &dev->mode_config.encoder_list, head) {
 		struct nouveau_encoder *nvenc = nouveau_encoder(enc);
 
 		if (nvenc == nv_encoder ||
-		    nvenc->disconnect != nv50_sor_disconnect ||
+		    (nvenc->dcb->type != OUTPUT_TMDS &&
+		     nvenc->dcb->type != OUTPUT_LVDS &&
+		     nvenc->dcb->type != OUTPUT_DP) ||
 		    nvenc->dcb->or != nv_encoder->dcb->or)
 			continue;
 
@@ -133,8 +115,22 @@ nv50_sor_dpms(struct drm_encoder *encoder, int mode)
 			 nv_rd32(dev, NV50_PDISPLAY_SOR_DPMS_STATE(or)));
 	}
 
-	if (nv_encoder->dcb->type == OUTPUT_DP && mode == DRM_MODE_DPMS_ON)
-		nv50_sor_dp_link_train(encoder);
+	if (nv_encoder->dcb->type == OUTPUT_DP) {
+		struct nouveau_i2c_chan *auxch;
+
+		auxch = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index);
+		if (!auxch)
+			return;
+
+		if (mode == DRM_MODE_DPMS_ON) {
+			u8 status = DP_SET_POWER_D0;
+			nouveau_dp_auxch(auxch, 8, DP_SET_POWER, &status, 1);
+			nouveau_dp_link_train(encoder);
+		} else {
+			u8 status = DP_SET_POWER_D3;
+			nouveau_dp_auxch(auxch, 8, DP_SET_POWER, &status, 1);
+		}
+	}
 }
 
 static void
@@ -196,7 +192,8 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	uint32_t mode_ctl = 0;
 	int ret;
 
-	NV_DEBUG_KMS(dev, "or %d\n", nv_encoder->or);
+	NV_DEBUG_KMS(dev, "or %d type %d -> crtc %d\n",
+		     nv_encoder->or, nv_encoder->dcb->type, crtc->index);
 
 	nv50_sor_dpms(encoder, DRM_MODE_DPMS_ON);
 
@@ -239,6 +236,14 @@ nv50_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	}
 	BEGIN_RING(evo, 0, NV50_EVO_SOR(nv_encoder->or, MODE_CTRL), 1);
 	OUT_RING(evo, mode_ctl);
+
+	nv_encoder->crtc = encoder->crtc;
+}
+
+static struct drm_crtc *
+nv50_sor_crtc_get(struct drm_encoder *encoder)
+{
+	return nouveau_encoder(encoder)->crtc;
 }
 
 static const struct drm_encoder_helper_funcs nv50_sor_helper_funcs = {
@@ -249,7 +254,9 @@ static const struct drm_encoder_helper_funcs nv50_sor_helper_funcs = {
 	.prepare = nv50_sor_prepare,
 	.commit = nv50_sor_commit,
 	.mode_set = nv50_sor_mode_set,
-	.detect = NULL
+	.get_crtc = nv50_sor_crtc_get,
+	.detect = NULL,
+	.disable = nv50_sor_disconnect
 };
 
 static void
@@ -272,32 +279,22 @@ static const struct drm_encoder_funcs nv50_sor_encoder_funcs = {
 };
 
 int
-nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
+nv50_sor_create(struct drm_connector *connector, struct dcb_entry *entry)
 {
 	struct nouveau_encoder *nv_encoder = NULL;
+	struct drm_device *dev = connector->dev;
 	struct drm_encoder *encoder;
-	bool dum;
 	int type;
 
 	NV_DEBUG_KMS(dev, "\n");
 
 	switch (entry->type) {
 	case OUTPUT_TMDS:
-		NV_INFO(dev, "Detected a TMDS output\n");
+	case OUTPUT_DP:
 		type = DRM_MODE_ENCODER_TMDS;
 		break;
 	case OUTPUT_LVDS:
-		NV_INFO(dev, "Detected a LVDS output\n");
 		type = DRM_MODE_ENCODER_LVDS;
-
-		if (nouveau_bios_parse_lvds_table(dev, 0, &dum, &dum)) {
-			NV_ERROR(dev, "Failed parsing LVDS table\n");
-			return -EINVAL;
-		}
-		break;
-	case OUTPUT_DP:
-		NV_INFO(dev, "Detected a DP output\n");
-		type = DRM_MODE_ENCODER_TMDS;
 		break;
 	default:
 		return -EINVAL;
@@ -310,8 +307,7 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
 
 	nv_encoder->dcb = entry;
 	nv_encoder->or = ffs(entry->or) - 1;
-
-	nv_encoder->disconnect = nv50_sor_disconnect;
+	nv_encoder->last_dpms = DRM_MODE_DPMS_OFF;
 
 	drm_encoder_init(dev, encoder, &nv50_sor_encoder_funcs, type);
 	drm_encoder_helper_add(encoder, &nv50_sor_helper_funcs);
@@ -342,5 +338,6 @@ nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
 			nv_encoder->dp.mc_unknown = 5;
 	}
 
+	drm_mode_connector_attach_encoder(connector, encoder);
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nvreg.h b/drivers/gpu/drm/nouveau/nvreg.h
index 5998c35237b..ad64673ace1 100644
--- a/drivers/gpu/drm/nouveau/nvreg.h
+++ b/drivers/gpu/drm/nouveau/nvreg.h
@@ -147,28 +147,6 @@
 #	define NV_VIO_GX_DONT_CARE_INDEX	0x07
 #	define NV_VIO_GX_BIT_MASK_INDEX		0x08
 
-#define NV_PFB_BOOT_0			0x00100000
-#define NV_PFB_CFG0			0x00100200
-#define NV_PFB_CFG1			0x00100204
-#define NV_PFB_CSTATUS			0x0010020C
-#define NV_PFB_REFCTRL			0x00100210
-#	define NV_PFB_REFCTRL_VALID_1			(1 << 31)
-#define NV_PFB_PAD			0x0010021C
-#	define NV_PFB_PAD_CKE_NORMAL			(1 << 0)
-#define NV_PFB_TILE_NV10		0x00100240
-#define NV_PFB_TILE_SIZE_NV10		0x00100244
-#define NV_PFB_REF			0x001002D0
-#	define NV_PFB_REF_CMD_REFRESH			(1 << 0)
-#define NV_PFB_PRE			0x001002D4
-#	define NV_PFB_PRE_CMD_PRECHARGE			(1 << 0)
-#define NV_PFB_CLOSE_PAGE2		0x0010033C
-#define NV_PFB_TILE_NV40		0x00100600
-#define NV_PFB_TILE_SIZE_NV40		0x00100604
-
-#define NV_PEXTDEV_BOOT_0		0x00101000
-#	define NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT	(8 << 12)
-#define NV_PEXTDEV_BOOT_3		0x0010100c
-
 #define NV_PCRTC_INTR_0					0x00600100
 #	define NV_PCRTC_INTR_0_VBLANK				(1 << 0)
 #define NV_PCRTC_INTR_EN_0				0x00600140
diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c
index e671d0e74d4..570e190710b 100644
--- a/drivers/gpu/drm/r128/r128_cce.c
+++ b/drivers/gpu/drm/r128/r128_cce.c
@@ -44,7 +44,7 @@
 
 MODULE_FIRMWARE(FIRMWARE_NAME);
 
-static int R128_READ_PLL(struct drm_device * dev, int addr)
+static int R128_READ_PLL(struct drm_device *dev, int addr)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 
@@ -53,7 +53,7 @@ static int R128_READ_PLL(struct drm_device * dev, int addr)
 }
 
 #if R128_FIFO_DEBUG
-static void r128_status(drm_r128_private_t * dev_priv)
+static void r128_status(drm_r128_private_t *dev_priv)
 {
 	printk("GUI_STAT           = 0x%08x\n",
 	       (unsigned int)R128_READ(R128_GUI_STAT));
@@ -74,7 +74,7 @@ static void r128_status(drm_r128_private_t * dev_priv)
  * Engine, FIFO control
  */
 
-static int r128_do_pixcache_flush(drm_r128_private_t * dev_priv)
+static int r128_do_pixcache_flush(drm_r128_private_t *dev_priv)
 {
 	u32 tmp;
 	int i;
@@ -83,9 +83,8 @@ static int r128_do_pixcache_flush(drm_r128_private_t * dev_priv)
 	R128_WRITE(R128_PC_NGUI_CTLSTAT, tmp);
 
 	for (i = 0; i < dev_priv->usec_timeout; i++) {
-		if (!(R128_READ(R128_PC_NGUI_CTLSTAT) & R128_PC_BUSY)) {
+		if (!(R128_READ(R128_PC_NGUI_CTLSTAT) & R128_PC_BUSY))
 			return 0;
-		}
 		DRM_UDELAY(1);
 	}
 
@@ -95,7 +94,7 @@ static int r128_do_pixcache_flush(drm_r128_private_t * dev_priv)
 	return -EBUSY;
 }
 
-static int r128_do_wait_for_fifo(drm_r128_private_t * dev_priv, int entries)
+static int r128_do_wait_for_fifo(drm_r128_private_t *dev_priv, int entries)
 {
 	int i;
 
@@ -112,7 +111,7 @@ static int r128_do_wait_for_fifo(drm_r128_private_t * dev_priv, int entries)
 	return -EBUSY;
 }
 
-static int r128_do_wait_for_idle(drm_r128_private_t * dev_priv)
+static int r128_do_wait_for_idle(drm_r128_private_t *dev_priv)
 {
 	int i, ret;
 
@@ -189,7 +188,7 @@ out_release:
  * prior to a wait for idle, as it informs the engine that the command
  * stream is ending.
  */
-static void r128_do_cce_flush(drm_r128_private_t * dev_priv)
+static void r128_do_cce_flush(drm_r128_private_t *dev_priv)
 {
 	u32 tmp;
 
@@ -199,7 +198,7 @@ static void r128_do_cce_flush(drm_r128_private_t * dev_priv)
 
 /* Wait for the CCE to go idle.
  */
-int r128_do_cce_idle(drm_r128_private_t * dev_priv)
+int r128_do_cce_idle(drm_r128_private_t *dev_priv)
 {
 	int i;
 
@@ -225,7 +224,7 @@ int r128_do_cce_idle(drm_r128_private_t * dev_priv)
 
 /* Start the Concurrent Command Engine.
  */
-static void r128_do_cce_start(drm_r128_private_t * dev_priv)
+static void r128_do_cce_start(drm_r128_private_t *dev_priv)
 {
 	r128_do_wait_for_idle(dev_priv);
 
@@ -242,7 +241,7 @@ static void r128_do_cce_start(drm_r128_private_t * dev_priv)
  * commands, so you must wait for the CCE command stream to complete
  * before calling this routine.
  */
-static void r128_do_cce_reset(drm_r128_private_t * dev_priv)
+static void r128_do_cce_reset(drm_r128_private_t *dev_priv)
 {
 	R128_WRITE(R128_PM4_BUFFER_DL_WPTR, 0);
 	R128_WRITE(R128_PM4_BUFFER_DL_RPTR, 0);
@@ -253,7 +252,7 @@ static void r128_do_cce_reset(drm_r128_private_t * dev_priv)
  * commands, so you must flush the command stream and wait for the CCE
  * to go idle before calling this routine.
  */
-static void r128_do_cce_stop(drm_r128_private_t * dev_priv)
+static void r128_do_cce_stop(drm_r128_private_t *dev_priv)
 {
 	R128_WRITE(R128_PM4_MICRO_CNTL, 0);
 	R128_WRITE(R128_PM4_BUFFER_CNTL,
@@ -264,7 +263,7 @@ static void r128_do_cce_stop(drm_r128_private_t * dev_priv)
 
 /* Reset the engine.  This will stop the CCE if it is running.
  */
-static int r128_do_engine_reset(struct drm_device * dev)
+static int r128_do_engine_reset(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	u32 clock_cntl_index, mclk_cntl, gen_reset_cntl;
@@ -301,8 +300,8 @@ static int r128_do_engine_reset(struct drm_device * dev)
 	return 0;
 }
 
-static void r128_cce_init_ring_buffer(struct drm_device * dev,
-				      drm_r128_private_t * dev_priv)
+static void r128_cce_init_ring_buffer(struct drm_device *dev,
+				      drm_r128_private_t *dev_priv)
 {
 	u32 ring_start;
 	u32 tmp;
@@ -340,7 +339,7 @@ static void r128_cce_init_ring_buffer(struct drm_device * dev,
 	R128_WRITE(R128_BUS_CNTL, tmp);
 }
 
-static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
+static int r128_do_init_cce(struct drm_device *dev, drm_r128_init_t *init)
 {
 	drm_r128_private_t *dev_priv;
 	int rc;
@@ -588,7 +587,7 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
 	return rc;
 }
 
-int r128_do_cleanup_cce(struct drm_device * dev)
+int r128_do_cleanup_cce(struct drm_device *dev)
 {
 
 	/* Make sure interrupts are disabled here because the uninstall ioctl
@@ -682,9 +681,8 @@ int r128_cce_stop(struct drm_device *dev, void *data, struct drm_file *file_priv
 	/* Flush any pending CCE commands.  This ensures any outstanding
 	 * commands are exectuted by the engine before we turn it off.
 	 */
-	if (stop->flush) {
+	if (stop->flush)
 		r128_do_cce_flush(dev_priv);
-	}
 
 	/* If we fail to make the engine go idle, we return an error
 	 * code so that the DRM ioctl wrapper can try again.
@@ -735,9 +733,8 @@ int r128_cce_idle(struct drm_device *dev, void *data, struct drm_file *file_priv
 
 	DEV_INIT_TEST_WITH_RETURN(dev_priv);
 
-	if (dev_priv->cce_running) {
+	if (dev_priv->cce_running)
 		r128_do_cce_flush(dev_priv);
-	}
 
 	return r128_do_cce_idle(dev_priv);
 }
@@ -765,7 +762,7 @@ int r128_fullscreen(struct drm_device *dev, void *data, struct drm_file *file_pr
 #define R128_BUFFER_FREE	0
 
 #if 0
-static int r128_freelist_init(struct drm_device * dev)
+static int r128_freelist_init(struct drm_device *dev)
 {
 	struct drm_device_dma *dma = dev->dma;
 	drm_r128_private_t *dev_priv = dev->dev_private;
@@ -848,7 +845,7 @@ static struct drm_buf *r128_freelist_get(struct drm_device * dev)
 	return NULL;
 }
 
-void r128_freelist_reset(struct drm_device * dev)
+void r128_freelist_reset(struct drm_device *dev)
 {
 	struct drm_device_dma *dma = dev->dma;
 	int i;
@@ -864,7 +861,7 @@ void r128_freelist_reset(struct drm_device * dev)
  * CCE command submission
  */
 
-int r128_wait_ring(drm_r128_private_t * dev_priv, int n)
+int r128_wait_ring(drm_r128_private_t *dev_priv, int n)
 {
 	drm_r128_ring_buffer_t *ring = &dev_priv->ring;
 	int i;
@@ -881,9 +878,9 @@ int r128_wait_ring(drm_r128_private_t * dev_priv, int n)
 	return -EBUSY;
 }
 
-static int r128_cce_get_buffers(struct drm_device * dev,
+static int r128_cce_get_buffers(struct drm_device *dev,
 				struct drm_file *file_priv,
-				struct drm_dma * d)
+				struct drm_dma *d)
 {
 	int i;
 	struct drm_buf *buf;
@@ -933,9 +930,8 @@ int r128_cce_buffers(struct drm_device *dev, void *data, struct drm_file *file_p
 
 	d->granted_count = 0;
 
-	if (d->request_count) {
+	if (d->request_count)
 		ret = r128_cce_get_buffers(dev, file_priv, d);
-	}
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c
index b806fdcc717..1e2971f13aa 100644
--- a/drivers/gpu/drm/r128/r128_drv.c
+++ b/drivers/gpu/drm/r128/r128_drv.c
@@ -85,7 +85,7 @@ static struct drm_driver driver = {
 	.patchlevel = DRIVER_PATCHLEVEL,
 };
 
-int r128_driver_load(struct drm_device * dev, unsigned long flags)
+int r128_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	return drm_vblank_init(dev, 1);
 }
diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h
index 3c60829d82e..930c71b2fb5 100644
--- a/drivers/gpu/drm/r128/r128_drv.h
+++ b/drivers/gpu/drm/r128/r128_drv.h
@@ -53,7 +53,7 @@
 #define DRIVER_MINOR		5
 #define DRIVER_PATCHLEVEL	0
 
-#define GET_RING_HEAD(dev_priv)		R128_READ( R128_PM4_BUFFER_DL_RPTR )
+#define GET_RING_HEAD(dev_priv)		R128_READ(R128_PM4_BUFFER_DL_RPTR)
 
 typedef struct drm_r128_freelist {
 	unsigned int age;
@@ -144,23 +144,23 @@ extern int r128_engine_reset(struct drm_device *dev, void *data, struct drm_file
 extern int r128_fullscreen(struct drm_device *dev, void *data, struct drm_file *file_priv);
 extern int r128_cce_buffers(struct drm_device *dev, void *data, struct drm_file *file_priv);
 
-extern void r128_freelist_reset(struct drm_device * dev);
+extern void r128_freelist_reset(struct drm_device *dev);
 
-extern int r128_wait_ring(drm_r128_private_t * dev_priv, int n);
+extern int r128_wait_ring(drm_r128_private_t *dev_priv, int n);
 
-extern int r128_do_cce_idle(drm_r128_private_t * dev_priv);
-extern int r128_do_cleanup_cce(struct drm_device * dev);
+extern int r128_do_cce_idle(drm_r128_private_t *dev_priv);
+extern int r128_do_cleanup_cce(struct drm_device *dev);
 
 extern int r128_enable_vblank(struct drm_device *dev, int crtc);
 extern void r128_disable_vblank(struct drm_device *dev, int crtc);
 extern u32 r128_get_vblank_counter(struct drm_device *dev, int crtc);
 extern irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS);
-extern void r128_driver_irq_preinstall(struct drm_device * dev);
+extern void r128_driver_irq_preinstall(struct drm_device *dev);
 extern int r128_driver_irq_postinstall(struct drm_device *dev);
-extern void r128_driver_irq_uninstall(struct drm_device * dev);
-extern void r128_driver_lastclose(struct drm_device * dev);
-extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
-extern void r128_driver_preclose(struct drm_device * dev,
+extern void r128_driver_irq_uninstall(struct drm_device *dev);
+extern void r128_driver_lastclose(struct drm_device *dev);
+extern int r128_driver_load(struct drm_device *dev, unsigned long flags);
+extern void r128_driver_preclose(struct drm_device *dev,
 				 struct drm_file *file_priv);
 
 extern long r128_compat_ioctl(struct file *filp, unsigned int cmd,
@@ -390,27 +390,27 @@ extern long r128_compat_ioctl(struct file *filp, unsigned int cmd,
 
 #define R128_PCIGART_TABLE_SIZE         32768
 
-#define R128_READ(reg)		DRM_READ32(  dev_priv->mmio, (reg) )
-#define R128_WRITE(reg,val)	DRM_WRITE32( dev_priv->mmio, (reg), (val) )
-#define R128_READ8(reg)		DRM_READ8(   dev_priv->mmio, (reg) )
-#define R128_WRITE8(reg,val)	DRM_WRITE8(  dev_priv->mmio, (reg), (val) )
+#define R128_READ(reg)		DRM_READ32(dev_priv->mmio, (reg))
+#define R128_WRITE(reg, val)	DRM_WRITE32(dev_priv->mmio, (reg), (val))
+#define R128_READ8(reg)		DRM_READ8(dev_priv->mmio, (reg))
+#define R128_WRITE8(reg, val)	DRM_WRITE8(dev_priv->mmio, (reg), (val))
 
-#define R128_WRITE_PLL(addr,val)					\
+#define R128_WRITE_PLL(addr, val)					\
 do {									\
 	R128_WRITE8(R128_CLOCK_CNTL_INDEX,				\
 		    ((addr) & 0x1f) | R128_PLL_WR_EN);			\
 	R128_WRITE(R128_CLOCK_CNTL_DATA, (val));			\
 } while (0)
 
-#define CCE_PACKET0( reg, n )		(R128_CCE_PACKET0 |		\
+#define CCE_PACKET0(reg, n)		(R128_CCE_PACKET0 |		\
 					 ((n) << 16) | ((reg) >> 2))
-#define CCE_PACKET1( reg0, reg1 )	(R128_CCE_PACKET1 |		\
+#define CCE_PACKET1(reg0, reg1)		(R128_CCE_PACKET1 |		\
 					 (((reg1) >> 2) << 11) | ((reg0) >> 2))
 #define CCE_PACKET2()			(R128_CCE_PACKET2)
-#define CCE_PACKET3( pkt, n )		(R128_CCE_PACKET3 |		\
+#define CCE_PACKET3(pkt, n)		(R128_CCE_PACKET3 |		\
 					 (pkt) | ((n) << 16))
 
-static __inline__ void r128_update_ring_snapshot(drm_r128_private_t * dev_priv)
+static __inline__ void r128_update_ring_snapshot(drm_r128_private_t *dev_priv)
 {
 	drm_r128_ring_buffer_t *ring = &dev_priv->ring;
 	ring->space = (GET_RING_HEAD(dev_priv) - ring->tail) * sizeof(u32);
@@ -430,37 +430,38 @@ do {									\
 	}								\
 } while (0)
 
-#define RING_SPACE_TEST_WITH_RETURN( dev_priv )				\
+#define RING_SPACE_TEST_WITH_RETURN(dev_priv)				\
 do {									\
 	drm_r128_ring_buffer_t *ring = &dev_priv->ring; int i;		\
-	if ( ring->space < ring->high_mark ) {				\
-		for ( i = 0 ; i < dev_priv->usec_timeout ; i++ ) {	\
-			r128_update_ring_snapshot( dev_priv );		\
-			if ( ring->space >= ring->high_mark )		\
+	if (ring->space < ring->high_mark) {				\
+		for (i = 0 ; i < dev_priv->usec_timeout ; i++) {	\
+			r128_update_ring_snapshot(dev_priv);		\
+			if (ring->space >= ring->high_mark)		\
 				goto __ring_space_done;			\
-			DRM_UDELAY(1);				\
+			DRM_UDELAY(1);					\
 		}							\
-		DRM_ERROR( "ring space check failed!\n" );		\
-		return -EBUSY;				\
+		DRM_ERROR("ring space check failed!\n");		\
+		return -EBUSY;						\
 	}								\
  __ring_space_done:							\
 	;								\
 } while (0)
 
-#define VB_AGE_TEST_WITH_RETURN( dev_priv )				\
+#define VB_AGE_TEST_WITH_RETURN(dev_priv)				\
 do {									\
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;		\
-	if ( sarea_priv->last_dispatch >= R128_MAX_VB_AGE ) {		\
-		int __ret = r128_do_cce_idle( dev_priv );		\
-		if ( __ret ) return __ret;				\
+	if (sarea_priv->last_dispatch >= R128_MAX_VB_AGE) {		\
+		int __ret = r128_do_cce_idle(dev_priv);			\
+		if (__ret)						\
+			return __ret;					\
 		sarea_priv->last_dispatch = 0;				\
-		r128_freelist_reset( dev );				\
+		r128_freelist_reset(dev);				\
 	}								\
 } while (0)
 
 #define R128_WAIT_UNTIL_PAGE_FLIPPED() do {				\
-	OUT_RING( CCE_PACKET0( R128_WAIT_UNTIL, 0 ) );			\
-	OUT_RING( R128_EVENT_CRTC_OFFSET );				\
+	OUT_RING(CCE_PACKET0(R128_WAIT_UNTIL, 0));			\
+	OUT_RING(R128_EVENT_CRTC_OFFSET);				\
 } while (0)
 
 /* ================================================================
@@ -472,13 +473,12 @@ do {									\
 #define RING_LOCALS							\
 	int write, _nr; unsigned int tail_mask; volatile u32 *ring;
 
-#define BEGIN_RING( n ) do {						\
-	if ( R128_VERBOSE ) {						\
-		DRM_INFO( "BEGIN_RING( %d )\n", (n));			\
-	}								\
-	if ( dev_priv->ring.space <= (n) * sizeof(u32) ) {		\
+#define BEGIN_RING(n) do {						\
+	if (R128_VERBOSE)						\
+		DRM_INFO("BEGIN_RING(%d)\n", (n));			\
+	if (dev_priv->ring.space <= (n) * sizeof(u32)) {		\
 		COMMIT_RING();						\
-		r128_wait_ring( dev_priv, (n) * sizeof(u32) );		\
+		r128_wait_ring(dev_priv, (n) * sizeof(u32));		\
 	}								\
 	_nr = n; dev_priv->ring.space -= (n) * sizeof(u32);		\
 	ring = dev_priv->ring.start;					\
@@ -494,40 +494,36 @@ do {									\
 #define R128_BROKEN_CCE	1
 
 #define ADVANCE_RING() do {						\
-	if ( R128_VERBOSE ) {						\
-		DRM_INFO( "ADVANCE_RING() wr=0x%06x tail=0x%06x\n",	\
-			  write, dev_priv->ring.tail );			\
-	}								\
-	if ( R128_BROKEN_CCE && write < 32 ) {				\
-		memcpy( dev_priv->ring.end,				\
-			dev_priv->ring.start,				\
-			write * sizeof(u32) );				\
-	}								\
-	if (((dev_priv->ring.tail + _nr) & tail_mask) != write) {	\
+	if (R128_VERBOSE)						\
+		DRM_INFO("ADVANCE_RING() wr=0x%06x tail=0x%06x\n",	\
+			 write, dev_priv->ring.tail);			\
+	if (R128_BROKEN_CCE && write < 32)				\
+		memcpy(dev_priv->ring.end,				\
+		       dev_priv->ring.start,				\
+		       write * sizeof(u32));				\
+	if (((dev_priv->ring.tail + _nr) & tail_mask) != write)		\
 		DRM_ERROR(						\
 			"ADVANCE_RING(): mismatch: nr: %x write: %x line: %d\n",	\
 			((dev_priv->ring.tail + _nr) & tail_mask),	\
 			write, __LINE__);				\
-	} else								\
+	else								\
 		dev_priv->ring.tail = write;				\
 } while (0)
 
 #define COMMIT_RING() do {						\
-	if ( R128_VERBOSE ) {						\
-		DRM_INFO( "COMMIT_RING() tail=0x%06x\n",		\
-			dev_priv->ring.tail );				\
-	}								\
+	if (R128_VERBOSE)						\
+		DRM_INFO("COMMIT_RING() tail=0x%06x\n",			\
+			 dev_priv->ring.tail);				\
 	DRM_MEMORYBARRIER();						\
-	R128_WRITE( R128_PM4_BUFFER_DL_WPTR, dev_priv->ring.tail );	\
-	R128_READ( R128_PM4_BUFFER_DL_WPTR );				\
+	R128_WRITE(R128_PM4_BUFFER_DL_WPTR, dev_priv->ring.tail);	\
+	R128_READ(R128_PM4_BUFFER_DL_WPTR);				\
 } while (0)
 
-#define OUT_RING( x ) do {						\
-	if ( R128_VERBOSE ) {						\
-		DRM_INFO( "   OUT_RING( 0x%08x ) at 0x%x\n",		\
-			   (unsigned int)(x), write );			\
-	}								\
-	ring[write++] = cpu_to_le32( x );				\
+#define OUT_RING(x) do {						\
+	if (R128_VERBOSE)						\
+		DRM_INFO("   OUT_RING( 0x%08x ) at 0x%x\n",		\
+			 (unsigned int)(x), write);			\
+	ring[write++] = cpu_to_le32(x);					\
 	write &= tail_mask;						\
 } while (0)
 
diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c
index 69810fb8ac4..429d5a02695 100644
--- a/drivers/gpu/drm/r128/r128_irq.c
+++ b/drivers/gpu/drm/r128/r128_irq.c
@@ -90,7 +90,7 @@ void r128_disable_vblank(struct drm_device *dev, int crtc)
 	 */
 }
 
-void r128_driver_irq_preinstall(struct drm_device * dev)
+void r128_driver_irq_preinstall(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = (drm_r128_private_t *) dev->dev_private;
 
@@ -105,7 +105,7 @@ int r128_driver_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-void r128_driver_irq_uninstall(struct drm_device * dev)
+void r128_driver_irq_uninstall(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = (drm_r128_private_t *) dev->dev_private;
 	if (!dev_priv)
diff --git a/drivers/gpu/drm/r128/r128_state.c b/drivers/gpu/drm/r128/r128_state.c
index af2665cf471..077af1f2f9b 100644
--- a/drivers/gpu/drm/r128/r128_state.c
+++ b/drivers/gpu/drm/r128/r128_state.c
@@ -37,8 +37,8 @@
  * CCE hardware state programming functions
  */
 
-static void r128_emit_clip_rects(drm_r128_private_t * dev_priv,
-				 struct drm_clip_rect * boxes, int count)
+static void r128_emit_clip_rects(drm_r128_private_t *dev_priv,
+				 struct drm_clip_rect *boxes, int count)
 {
 	u32 aux_sc_cntl = 0x00000000;
 	RING_LOCALS;
@@ -80,7 +80,7 @@ static void r128_emit_clip_rects(drm_r128_private_t * dev_priv,
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_core(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_core(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -95,7 +95,7 @@ static __inline__ void r128_emit_core(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_context(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_context(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -121,7 +121,7 @@ static __inline__ void r128_emit_context(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_setup(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_setup(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -137,7 +137,7 @@ static __inline__ void r128_emit_setup(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_masks(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_masks(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -156,7 +156,7 @@ static __inline__ void r128_emit_masks(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_window(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_window(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -171,7 +171,7 @@ static __inline__ void r128_emit_window(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_tex0(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_tex0(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_context_regs_t *ctx = &sarea_priv->context_state;
@@ -187,9 +187,8 @@ static __inline__ void r128_emit_tex0(drm_r128_private_t * dev_priv)
 	OUT_RING(tex->tex_cntl);
 	OUT_RING(tex->tex_combine_cntl);
 	OUT_RING(ctx->tex_size_pitch_c);
-	for (i = 0; i < R128_MAX_TEXTURE_LEVELS; i++) {
+	for (i = 0; i < R128_MAX_TEXTURE_LEVELS; i++)
 		OUT_RING(tex->tex_offset[i]);
-	}
 
 	OUT_RING(CCE_PACKET0(R128_CONSTANT_COLOR_C, 1));
 	OUT_RING(ctx->constant_color_c);
@@ -198,7 +197,7 @@ static __inline__ void r128_emit_tex0(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static __inline__ void r128_emit_tex1(drm_r128_private_t * dev_priv)
+static __inline__ void r128_emit_tex1(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	drm_r128_texture_regs_t *tex = &sarea_priv->tex_state[1];
@@ -211,9 +210,8 @@ static __inline__ void r128_emit_tex1(drm_r128_private_t * dev_priv)
 	OUT_RING(CCE_PACKET0(R128_SEC_TEX_CNTL_C, 1 + R128_MAX_TEXTURE_LEVELS));
 	OUT_RING(tex->tex_cntl);
 	OUT_RING(tex->tex_combine_cntl);
-	for (i = 0; i < R128_MAX_TEXTURE_LEVELS; i++) {
+	for (i = 0; i < R128_MAX_TEXTURE_LEVELS; i++)
 		OUT_RING(tex->tex_offset[i]);
-	}
 
 	OUT_RING(CCE_PACKET0(R128_SEC_TEXTURE_BORDER_COLOR_C, 0));
 	OUT_RING(tex->tex_border_color);
@@ -221,7 +219,7 @@ static __inline__ void r128_emit_tex1(drm_r128_private_t * dev_priv)
 	ADVANCE_RING();
 }
 
-static void r128_emit_state(drm_r128_private_t * dev_priv)
+static void r128_emit_state(drm_r128_private_t *dev_priv)
 {
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
 	unsigned int dirty = sarea_priv->dirty;
@@ -274,7 +272,7 @@ static void r128_emit_state(drm_r128_private_t * dev_priv)
  * Performance monitoring functions
  */
 
-static void r128_clear_box(drm_r128_private_t * dev_priv,
+static void r128_clear_box(drm_r128_private_t *dev_priv,
 			   int x, int y, int w, int h, int r, int g, int b)
 {
 	u32 pitch, offset;
@@ -321,13 +319,12 @@ static void r128_clear_box(drm_r128_private_t * dev_priv,
 	ADVANCE_RING();
 }
 
-static void r128_cce_performance_boxes(drm_r128_private_t * dev_priv)
+static void r128_cce_performance_boxes(drm_r128_private_t *dev_priv)
 {
-	if (atomic_read(&dev_priv->idle_count) == 0) {
+	if (atomic_read(&dev_priv->idle_count) == 0)
 		r128_clear_box(dev_priv, 64, 4, 8, 8, 0, 255, 0);
-	} else {
+	else
 		atomic_set(&dev_priv->idle_count, 0);
-	}
 }
 
 #endif
@@ -352,8 +349,8 @@ static void r128_print_dirty(const char *msg, unsigned int flags)
 		 (flags & R128_REQUIRE_QUIESCENCE) ? "quiescence, " : "");
 }
 
-static void r128_cce_dispatch_clear(struct drm_device * dev,
-				    drm_r128_clear_t * clear)
+static void r128_cce_dispatch_clear(struct drm_device *dev,
+				    drm_r128_clear_t *clear)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -458,7 +455,7 @@ static void r128_cce_dispatch_clear(struct drm_device * dev,
 	}
 }
 
-static void r128_cce_dispatch_swap(struct drm_device * dev)
+static void r128_cce_dispatch_swap(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	drm_r128_sarea_t *sarea_priv = dev_priv->sarea_priv;
@@ -524,7 +521,7 @@ static void r128_cce_dispatch_swap(struct drm_device * dev)
 	ADVANCE_RING();
 }
 
-static void r128_cce_dispatch_flip(struct drm_device * dev)
+static void r128_cce_dispatch_flip(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	RING_LOCALS;
@@ -542,11 +539,10 @@ static void r128_cce_dispatch_flip(struct drm_device * dev)
 	R128_WAIT_UNTIL_PAGE_FLIPPED();
 	OUT_RING(CCE_PACKET0(R128_CRTC_OFFSET, 0));
 
-	if (dev_priv->current_page == 0) {
+	if (dev_priv->current_page == 0)
 		OUT_RING(dev_priv->back_offset);
-	} else {
+	else
 		OUT_RING(dev_priv->front_offset);
-	}
 
 	ADVANCE_RING();
 
@@ -566,7 +562,7 @@ static void r128_cce_dispatch_flip(struct drm_device * dev)
 	ADVANCE_RING();
 }
 
-static void r128_cce_dispatch_vertex(struct drm_device * dev, struct drm_buf * buf)
+static void r128_cce_dispatch_vertex(struct drm_device *dev, struct drm_buf *buf)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	drm_r128_buf_priv_t *buf_priv = buf->dev_private;
@@ -585,9 +581,8 @@ static void r128_cce_dispatch_vertex(struct drm_device * dev, struct drm_buf * b
 	if (buf->used) {
 		buf_priv->dispatched = 1;
 
-		if (sarea_priv->dirty & ~R128_UPLOAD_CLIPRECTS) {
+		if (sarea_priv->dirty & ~R128_UPLOAD_CLIPRECTS)
 			r128_emit_state(dev_priv);
-		}
 
 		do {
 			/* Emit the next set of up to three cliprects */
@@ -636,8 +631,8 @@ static void r128_cce_dispatch_vertex(struct drm_device * dev, struct drm_buf * b
 	sarea_priv->nbox = 0;
 }
 
-static void r128_cce_dispatch_indirect(struct drm_device * dev,
-				       struct drm_buf * buf, int start, int end)
+static void r128_cce_dispatch_indirect(struct drm_device *dev,
+				       struct drm_buf *buf, int start, int end)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	drm_r128_buf_priv_t *buf_priv = buf->dev_private;
@@ -691,8 +686,8 @@ static void r128_cce_dispatch_indirect(struct drm_device * dev,
 	dev_priv->sarea_priv->last_dispatch++;
 }
 
-static void r128_cce_dispatch_indices(struct drm_device * dev,
-				      struct drm_buf * buf,
+static void r128_cce_dispatch_indices(struct drm_device *dev,
+				      struct drm_buf *buf,
 				      int start, int end, int count)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
@@ -713,9 +708,8 @@ static void r128_cce_dispatch_indices(struct drm_device * dev,
 	if (start != end) {
 		buf_priv->dispatched = 1;
 
-		if (sarea_priv->dirty & ~R128_UPLOAD_CLIPRECTS) {
+		if (sarea_priv->dirty & ~R128_UPLOAD_CLIPRECTS)
 			r128_emit_state(dev_priv);
-		}
 
 		dwords = (end - start + 3) / sizeof(u32);
 
@@ -775,9 +769,9 @@ static void r128_cce_dispatch_indices(struct drm_device * dev,
 	sarea_priv->nbox = 0;
 }
 
-static int r128_cce_dispatch_blit(struct drm_device * dev,
+static int r128_cce_dispatch_blit(struct drm_device *dev,
 				  struct drm_file *file_priv,
-				  drm_r128_blit_t * blit)
+				  drm_r128_blit_t *blit)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	struct drm_device_dma *dma = dev->dma;
@@ -887,8 +881,8 @@ static int r128_cce_dispatch_blit(struct drm_device * dev,
  * have hardware stencil support.
  */
 
-static int r128_cce_dispatch_write_span(struct drm_device * dev,
-					drm_r128_depth_t * depth)
+static int r128_cce_dispatch_write_span(struct drm_device *dev,
+					drm_r128_depth_t *depth)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	int count, x, y;
@@ -902,12 +896,10 @@ static int r128_cce_dispatch_write_span(struct drm_device * dev,
 	if (count > 4096 || count <= 0)
 		return -EMSGSIZE;
 
-	if (DRM_COPY_FROM_USER(&x, depth->x, sizeof(x))) {
+	if (DRM_COPY_FROM_USER(&x, depth->x, sizeof(x)))
 		return -EFAULT;
-	}
-	if (DRM_COPY_FROM_USER(&y, depth->y, sizeof(y))) {
+	if (DRM_COPY_FROM_USER(&y, depth->y, sizeof(y)))
 		return -EFAULT;
-	}
 
 	buffer_size = depth->n * sizeof(u32);
 	buffer = kmalloc(buffer_size, GFP_KERNEL);
@@ -983,8 +975,8 @@ static int r128_cce_dispatch_write_span(struct drm_device * dev,
 	return 0;
 }
 
-static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
-					  drm_r128_depth_t * depth)
+static int r128_cce_dispatch_write_pixels(struct drm_device *dev,
+					  drm_r128_depth_t *depth)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	int count, *x, *y;
@@ -1001,9 +993,8 @@ static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
 	xbuf_size = count * sizeof(*x);
 	ybuf_size = count * sizeof(*y);
 	x = kmalloc(xbuf_size, GFP_KERNEL);
-	if (x == NULL) {
+	if (x == NULL)
 		return -ENOMEM;
-	}
 	y = kmalloc(ybuf_size, GFP_KERNEL);
 	if (y == NULL) {
 		kfree(x);
@@ -1105,8 +1096,8 @@ static int r128_cce_dispatch_write_pixels(struct drm_device * dev,
 	return 0;
 }
 
-static int r128_cce_dispatch_read_span(struct drm_device * dev,
-				       drm_r128_depth_t * depth)
+static int r128_cce_dispatch_read_span(struct drm_device *dev,
+				       drm_r128_depth_t *depth)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	int count, x, y;
@@ -1117,12 +1108,10 @@ static int r128_cce_dispatch_read_span(struct drm_device * dev,
 	if (count > 4096 || count <= 0)
 		return -EMSGSIZE;
 
-	if (DRM_COPY_FROM_USER(&x, depth->x, sizeof(x))) {
+	if (DRM_COPY_FROM_USER(&x, depth->x, sizeof(x)))
 		return -EFAULT;
-	}
-	if (DRM_COPY_FROM_USER(&y, depth->y, sizeof(y))) {
+	if (DRM_COPY_FROM_USER(&y, depth->y, sizeof(y)))
 		return -EFAULT;
-	}
 
 	BEGIN_RING(7);
 
@@ -1148,8 +1137,8 @@ static int r128_cce_dispatch_read_span(struct drm_device * dev,
 	return 0;
 }
 
-static int r128_cce_dispatch_read_pixels(struct drm_device * dev,
-					 drm_r128_depth_t * depth)
+static int r128_cce_dispatch_read_pixels(struct drm_device *dev,
+					 drm_r128_depth_t *depth)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	int count, *x, *y;
@@ -1161,16 +1150,14 @@ static int r128_cce_dispatch_read_pixels(struct drm_device * dev,
 	if (count > 4096 || count <= 0)
 		return -EMSGSIZE;
 
-	if (count > dev_priv->depth_pitch) {
+	if (count > dev_priv->depth_pitch)
 		count = dev_priv->depth_pitch;
-	}
 
 	xbuf_size = count * sizeof(*x);
 	ybuf_size = count * sizeof(*y);
 	x = kmalloc(xbuf_size, GFP_KERNEL);
-	if (x == NULL) {
+	if (x == NULL)
 		return -ENOMEM;
-	}
 	y = kmalloc(ybuf_size, GFP_KERNEL);
 	if (y == NULL) {
 		kfree(x);
@@ -1220,7 +1207,7 @@ static int r128_cce_dispatch_read_pixels(struct drm_device * dev,
  * Polygon stipple
  */
 
-static void r128_cce_dispatch_stipple(struct drm_device * dev, u32 * stipple)
+static void r128_cce_dispatch_stipple(struct drm_device *dev, u32 *stipple)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	int i;
@@ -1230,9 +1217,8 @@ static void r128_cce_dispatch_stipple(struct drm_device * dev, u32 * stipple)
 	BEGIN_RING(33);
 
 	OUT_RING(CCE_PACKET0(R128_BRUSH_DATA0, 31));
-	for (i = 0; i < 32; i++) {
+	for (i = 0; i < 32; i++)
 		OUT_RING(stipple[i]);
-	}
 
 	ADVANCE_RING();
 }
@@ -1269,7 +1255,7 @@ static int r128_cce_clear(struct drm_device *dev, void *data, struct drm_file *f
 	return 0;
 }
 
-static int r128_do_init_pageflip(struct drm_device * dev)
+static int r128_do_init_pageflip(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	DRM_DEBUG("\n");
@@ -1288,7 +1274,7 @@ static int r128_do_init_pageflip(struct drm_device * dev)
 	return 0;
 }
 
-static int r128_do_cleanup_pageflip(struct drm_device * dev)
+static int r128_do_cleanup_pageflip(struct drm_device *dev)
 {
 	drm_r128_private_t *dev_priv = dev->dev_private;
 	DRM_DEBUG("\n");
@@ -1645,17 +1631,16 @@ static int r128_getparam(struct drm_device *dev, void *data, struct drm_file *fi
 	return 0;
 }
 
-void r128_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
+void r128_driver_preclose(struct drm_device *dev, struct drm_file *file_priv)
 {
 	if (dev->dev_private) {
 		drm_r128_private_t *dev_priv = dev->dev_private;
-		if (dev_priv->page_flipping) {
+		if (dev_priv->page_flipping)
 			r128_do_cleanup_pageflip(dev);
-		}
 	}
 }
 
-void r128_driver_lastclose(struct drm_device * dev)
+void r128_driver_lastclose(struct drm_device *dev)
 {
 	r128_do_cleanup_cce(dev);
 }
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 84b1f2729d4..aebe0087504 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -69,5 +69,6 @@ radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 radeon-$(CONFIG_VGA_SWITCHEROO) += radeon_atpx_handler.o
+radeon-$(CONFIG_ACPI) += radeon_acpi.o
 
 obj-$(CONFIG_DRM_RADEON)+= radeon.o
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 1d569830ed9..8e421f644a5 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -108,12 +108,11 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 			base++;
 			break;
 		case ATOM_IIO_READ:
-			temp = ctx->card->reg_read(ctx->card, CU16(base + 1));
+			temp = ctx->card->ioreg_read(ctx->card, CU16(base + 1));
 			base += 3;
 			break;
 		case ATOM_IIO_WRITE:
-			(void)ctx->card->reg_read(ctx->card, CU16(base + 1));
-			ctx->card->reg_write(ctx->card, CU16(base + 1), temp);
+			ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
 			base += 3;
 			break;
 		case ATOM_IIO_CLEAR:
@@ -715,8 +714,8 @@ static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
 			cjiffies = jiffies;
 			if (time_after(cjiffies, ctx->last_jump_jiffies)) {
 				cjiffies -= ctx->last_jump_jiffies;
-				if ((jiffies_to_msecs(cjiffies) > 1000)) {
-					DRM_ERROR("atombios stuck in loop for more than 1sec aborting\n");
+				if ((jiffies_to_msecs(cjiffies) > 5000)) {
+					DRM_ERROR("atombios stuck in loop for more than 5secs aborting\n");
 					ctx->abort = true;
 				}
 			} else {
diff --git a/drivers/gpu/drm/radeon/atom.h b/drivers/gpu/drm/radeon/atom.h
index cd1b64ab5ca..a589a55b223 100644
--- a/drivers/gpu/drm/radeon/atom.h
+++ b/drivers/gpu/drm/radeon/atom.h
@@ -113,6 +113,8 @@ struct card_info {
 	struct drm_device *dev;
 	void (* reg_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
         uint32_t (* reg_read)(struct card_info *, uint32_t);          /*  filled by driver */
+	void (* ioreg_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
+        uint32_t (* ioreg_read)(struct card_info *, uint32_t);          /*  filled by driver */
 	void (* mc_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
         uint32_t (* mc_read)(struct card_info *, uint32_t);          /*  filled by driver */
 	void (* pll_write)(struct card_info *, uint32_t, uint32_t);   /*  filled by driver */
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 8c2d6478a22..12ad512bd3d 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -44,10 +44,6 @@ static void atombios_overscan_setup(struct drm_crtc *crtc,
 
 	memset(&args, 0, sizeof(args));
 
-	args.usOverscanRight = 0;
-	args.usOverscanLeft = 0;
-	args.usOverscanBottom = 0;
-	args.usOverscanTop = 0;
 	args.ucCRTC = radeon_crtc->crtc_id;
 
 	switch (radeon_crtc->rmx_type) {
@@ -56,7 +52,6 @@ static void atombios_overscan_setup(struct drm_crtc *crtc,
 		args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
 		args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
 		args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 		break;
 	case RMX_ASPECT:
 		a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
@@ -69,17 +64,16 @@ static void atombios_overscan_setup(struct drm_crtc *crtc,
 			args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
 			args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
 		}
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 		break;
 	case RMX_FULL:
 	default:
-		args.usOverscanRight = 0;
-		args.usOverscanLeft = 0;
-		args.usOverscanBottom = 0;
-		args.usOverscanTop = 0;
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		args.usOverscanRight = radeon_crtc->h_border;
+		args.usOverscanLeft = radeon_crtc->h_border;
+		args.usOverscanBottom = radeon_crtc->v_border;
+		args.usOverscanTop = radeon_crtc->v_border;
 		break;
 	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
 static void atombios_scaler_setup(struct drm_crtc *crtc)
@@ -282,22 +276,22 @@ atombios_set_crtc_dtd_timing(struct drm_crtc *crtc,
 	u16 misc = 0;
 
 	memset(&args, 0, sizeof(args));
-	args.usH_Size = cpu_to_le16(mode->crtc_hdisplay);
+	args.usH_Size = cpu_to_le16(mode->crtc_hdisplay - (radeon_crtc->h_border * 2));
 	args.usH_Blanking_Time =
-		cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay);
-	args.usV_Size = cpu_to_le16(mode->crtc_vdisplay);
+		cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay + (radeon_crtc->h_border * 2));
+	args.usV_Size = cpu_to_le16(mode->crtc_vdisplay - (radeon_crtc->v_border * 2));
 	args.usV_Blanking_Time =
-	    cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay);
+		cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay + (radeon_crtc->v_border * 2));
 	args.usH_SyncOffset =
-		cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay);
+		cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay + radeon_crtc->h_border);
 	args.usH_SyncWidth =
 		cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start);
 	args.usV_SyncOffset =
-		cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay);
+		cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay + radeon_crtc->v_border);
 	args.usV_SyncWidth =
 		cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start);
-	/*args.ucH_Border = mode->hborder;*/
-	/*args.ucV_Border = mode->vborder;*/
+	args.ucH_Border = radeon_crtc->h_border;
+	args.ucV_Border = radeon_crtc->v_border;
 
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 		misc |= ATOM_VSYNC_POLARITY;
@@ -669,56 +663,25 @@ static void atombios_crtc_set_dcpll(struct drm_crtc *crtc)
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
-static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+static void atombios_crtc_program_pll(struct drm_crtc *crtc,
+				      int crtc_id,
+				      int pll_id,
+				      u32 encoder_mode,
+				      u32 encoder_id,
+				      u32 clock,
+				      u32 ref_div,
+				      u32 fb_div,
+				      u32 frac_fb_div,
+				      u32 post_div)
 {
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct radeon_device *rdev = dev->dev_private;
-	struct drm_encoder *encoder = NULL;
-	struct radeon_encoder *radeon_encoder = NULL;
 	u8 frev, crev;
-	int index;
+	int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
 	union set_pixel_clock args;
-	u32 pll_clock = mode->clock;
-	u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
-	struct radeon_pll *pll;
-	u32 adjusted_clock;
-	int encoder_mode = 0;
 
 	memset(&args, 0, sizeof(args));
 
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		if (encoder->crtc == crtc) {
-			radeon_encoder = to_radeon_encoder(encoder);
-			encoder_mode = atombios_get_encoder_mode(encoder);
-			break;
-		}
-	}
-
-	if (!radeon_encoder)
-		return;
-
-	switch (radeon_crtc->pll_id) {
-	case ATOM_PPLL1:
-		pll = &rdev->clock.p1pll;
-		break;
-	case ATOM_PPLL2:
-		pll = &rdev->clock.p2pll;
-		break;
-	case ATOM_DCPLL:
-	case ATOM_PPLL_INVALID:
-	default:
-		pll = &rdev->clock.dcpll;
-		break;
-	}
-
-	/* adjust pixel clock as needed */
-	adjusted_clock = atombios_adjust_pll(crtc, mode, pll);
-
-	radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
-			   &ref_div, &post_div);
-
-	index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
 	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
 				   &crev))
 		return;
@@ -727,47 +690,49 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
 	case 1:
 		switch (crev) {
 		case 1:
-			args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
+			if (clock == ATOM_DISABLE)
+				return;
+			args.v1.usPixelClock = cpu_to_le16(clock / 10);
 			args.v1.usRefDiv = cpu_to_le16(ref_div);
 			args.v1.usFbDiv = cpu_to_le16(fb_div);
 			args.v1.ucFracFbDiv = frac_fb_div;
 			args.v1.ucPostDiv = post_div;
-			args.v1.ucPpll = radeon_crtc->pll_id;
-			args.v1.ucCRTC = radeon_crtc->crtc_id;
+			args.v1.ucPpll = pll_id;
+			args.v1.ucCRTC = crtc_id;
 			args.v1.ucRefDivSrc = 1;
 			break;
 		case 2:
-			args.v2.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v2.usPixelClock = cpu_to_le16(clock / 10);
 			args.v2.usRefDiv = cpu_to_le16(ref_div);
 			args.v2.usFbDiv = cpu_to_le16(fb_div);
 			args.v2.ucFracFbDiv = frac_fb_div;
 			args.v2.ucPostDiv = post_div;
-			args.v2.ucPpll = radeon_crtc->pll_id;
-			args.v2.ucCRTC = radeon_crtc->crtc_id;
+			args.v2.ucPpll = pll_id;
+			args.v2.ucCRTC = crtc_id;
 			args.v2.ucRefDivSrc = 1;
 			break;
 		case 3:
-			args.v3.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v3.usPixelClock = cpu_to_le16(clock / 10);
 			args.v3.usRefDiv = cpu_to_le16(ref_div);
 			args.v3.usFbDiv = cpu_to_le16(fb_div);
 			args.v3.ucFracFbDiv = frac_fb_div;
 			args.v3.ucPostDiv = post_div;
-			args.v3.ucPpll = radeon_crtc->pll_id;
-			args.v3.ucMiscInfo = (radeon_crtc->pll_id << 2);
-			args.v3.ucTransmitterId = radeon_encoder->encoder_id;
+			args.v3.ucPpll = pll_id;
+			args.v3.ucMiscInfo = (pll_id << 2);
+			args.v3.ucTransmitterId = encoder_id;
 			args.v3.ucEncoderMode = encoder_mode;
 			break;
 		case 5:
-			args.v5.ucCRTC = radeon_crtc->crtc_id;
-			args.v5.usPixelClock = cpu_to_le16(mode->clock / 10);
+			args.v5.ucCRTC = crtc_id;
+			args.v5.usPixelClock = cpu_to_le16(clock / 10);
 			args.v5.ucRefDiv = ref_div;
 			args.v5.usFbDiv = cpu_to_le16(fb_div);
 			args.v5.ulFbDivDecFrac = cpu_to_le32(frac_fb_div * 100000);
 			args.v5.ucPostDiv = post_div;
 			args.v5.ucMiscInfo = 0; /* HDMI depth, etc. */
-			args.v5.ucTransmitterID = radeon_encoder->encoder_id;
+			args.v5.ucTransmitterID = encoder_id;
 			args.v5.ucEncoderMode = encoder_mode;
-			args.v5.ucPpll = radeon_crtc->pll_id;
+			args.v5.ucPpll = pll_id;
 			break;
 		default:
 			DRM_ERROR("Unknown table version %d %d\n", frev, crev);
@@ -782,6 +747,56 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct drm_encoder *encoder = NULL;
+	struct radeon_encoder *radeon_encoder = NULL;
+	u32 pll_clock = mode->clock;
+	u32 ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
+	struct radeon_pll *pll;
+	u32 adjusted_clock;
+	int encoder_mode = 0;
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		if (encoder->crtc == crtc) {
+			radeon_encoder = to_radeon_encoder(encoder);
+			encoder_mode = atombios_get_encoder_mode(encoder);
+			break;
+		}
+	}
+
+	if (!radeon_encoder)
+		return;
+
+	switch (radeon_crtc->pll_id) {
+	case ATOM_PPLL1:
+		pll = &rdev->clock.p1pll;
+		break;
+	case ATOM_PPLL2:
+		pll = &rdev->clock.p2pll;
+		break;
+	case ATOM_DCPLL:
+	case ATOM_PPLL_INVALID:
+	default:
+		pll = &rdev->clock.dcpll;
+		break;
+	}
+
+	/* adjust pixel clock as needed */
+	adjusted_clock = atombios_adjust_pll(crtc, mode, pll);
+
+	radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+			   &ref_div, &post_div);
+
+	atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id,
+				  encoder_mode, radeon_encoder->encoder_id, mode->clock,
+				  ref_div, fb_div, frac_fb_div, post_div);
+
+}
+
 static int evergreen_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 				   struct drm_framebuffer *old_fb)
 {
@@ -797,7 +812,7 @@ static int evergreen_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 
 	/* no fb bound */
 	if (!crtc->fb) {
-		DRM_DEBUG("No FB bound\n");
+		DRM_DEBUG_KMS("No FB bound\n");
 		return 0;
 	}
 
@@ -841,6 +856,11 @@ static int evergreen_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		return -EINVAL;
 	}
 
+	if (tiling_flags & RADEON_TILING_MACRO)
+		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1);
+	else if (tiling_flags & RADEON_TILING_MICRO)
+		fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+
 	switch (radeon_crtc->crtc_id) {
 	case 0:
 		WREG32(AVIVO_D1VGA_CONTROL, 0);
@@ -931,7 +951,7 @@ static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 
 	/* no fb bound */
 	if (!crtc->fb) {
-		DRM_DEBUG("No FB bound\n");
+		DRM_DEBUG_KMS("No FB bound\n");
 		return 0;
 	}
 
@@ -979,11 +999,18 @@ static int avivo_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		return -EINVAL;
 	}
 
-	if (tiling_flags & RADEON_TILING_MACRO)
-		fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+	if (rdev->family >= CHIP_R600) {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			fb_format |= R600_D1GRPH_ARRAY_MODE_2D_TILED_THIN1;
+		else if (tiling_flags & RADEON_TILING_MICRO)
+			fb_format |= R600_D1GRPH_ARRAY_MODE_1D_TILED_THIN1;
+	} else {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
 
-	if (tiling_flags & RADEON_TILING_MICRO)
-		fb_format |= AVIVO_D1GRPH_TILED;
+		if (tiling_flags & RADEON_TILING_MICRO)
+			fb_format |= AVIVO_D1GRPH_TILED;
+	}
 
 	if (radeon_crtc->crtc_id == 0)
 		WREG32(AVIVO_D1VGA_CONTROL, 0);
@@ -1143,10 +1170,8 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc,
 	atombios_crtc_set_pll(crtc, adjusted_mode);
 	atombios_enable_ss(crtc);
 
-	if (ASIC_IS_DCE4(rdev))
+	if (ASIC_IS_AVIVO(rdev))
 		atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
-	else if (ASIC_IS_AVIVO(rdev))
-		atombios_crtc_set_timing(crtc, adjusted_mode);
 	else {
 		atombios_crtc_set_timing(crtc, adjusted_mode);
 		if (radeon_crtc->crtc_id == 0)
@@ -1191,6 +1216,24 @@ static void atombios_crtc_commit(struct drm_crtc *crtc)
 	atombios_lock_crtc(crtc, ATOM_DISABLE);
 }
 
+static void atombios_crtc_disable(struct drm_crtc *crtc)
+{
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	switch (radeon_crtc->pll_id) {
+	case ATOM_PPLL1:
+	case ATOM_PPLL2:
+		/* disable the ppll */
+		atombios_crtc_program_pll(crtc, radeon_crtc->crtc_id, radeon_crtc->pll_id,
+					  0, 0, ATOM_DISABLE, 0, 0, 0, 0);
+		break;
+	default:
+		break;
+	}
+	radeon_crtc->pll_id = -1;
+}
+
 static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
 	.dpms = atombios_crtc_dpms,
 	.mode_fixup = atombios_crtc_mode_fixup,
@@ -1199,6 +1242,7 @@ static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
 	.prepare = atombios_crtc_prepare,
 	.commit = atombios_crtc_commit,
 	.load_lut = radeon_crtc_load_lut,
+	.disable = atombios_crtc_disable,
 };
 
 void radeon_atombios_init_crtc(struct drm_device *dev,
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index abffb1499e2..36e0d4b545e 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -296,7 +296,7 @@ static void dp_get_adjust_train(u8 link_status[DP_LINK_STATUS_SIZE],
 		u8 this_v = dp_get_adjust_request_voltage(link_status, lane);
 		u8 this_p = dp_get_adjust_request_pre_emphasis(link_status, lane);
 
-		DRM_DEBUG("requested signal parameters: lane %d voltage %s pre_emph %s\n",
+		DRM_DEBUG_KMS("requested signal parameters: lane %d voltage %s pre_emph %s\n",
 			  lane,
 			  voltage_names[this_v >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
 			  pre_emph_names[this_p >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
@@ -313,7 +313,7 @@ static void dp_get_adjust_train(u8 link_status[DP_LINK_STATUS_SIZE],
 	if (p >= dp_pre_emphasis_max(v))
 		p = dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
 
-	DRM_DEBUG("using signal parameters: voltage %s pre_emph %s\n",
+	DRM_DEBUG_KMS("using signal parameters: voltage %s pre_emph %s\n",
 		  voltage_names[(v & DP_TRAIN_VOLTAGE_SWING_MASK) >> DP_TRAIN_VOLTAGE_SWING_SHIFT],
 		  pre_emph_names[(p & DP_TRAIN_PRE_EMPHASIS_MASK) >> DP_TRAIN_PRE_EMPHASIS_SHIFT]);
 
@@ -358,7 +358,7 @@ retry:
 	if (args.v1.ucReplyStatus && !args.v1.ucDataOutLen) {
 		if (args.v1.ucReplyStatus == 0x20 && retry_count++ < 10)
 			goto retry;
-		DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
+		DRM_DEBUG_KMS("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
 			  req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3],
 			  chan->rec.i2c_id, args.v1.ucReplyStatus, retry_count);
 		return false;
@@ -461,10 +461,10 @@ bool radeon_dp_getdpcd(struct radeon_connector *radeon_connector)
 		memcpy(dig_connector->dpcd, msg, 8);
 		{
 			int i;
-			DRM_DEBUG("DPCD: ");
+			DRM_DEBUG_KMS("DPCD: ");
 			for (i = 0; i < 8; i++)
-				DRM_DEBUG("%02x ", msg[i]);
-			DRM_DEBUG("\n");
+				DRM_DEBUG_KMS("%02x ", msg[i]);
+			DRM_DEBUG_KMS("\n");
 		}
 		return true;
 	}
@@ -512,7 +512,7 @@ static bool atom_dp_get_link_status(struct radeon_connector *radeon_connector,
 		return false;
 	}
 
-	DRM_DEBUG("link status %02x %02x %02x %02x %02x %02x\n",
+	DRM_DEBUG_KMS("link status %02x %02x %02x %02x %02x %02x\n",
 		  link_status[0], link_status[1], link_status[2],
 		  link_status[3], link_status[4], link_status[5]);
 	return true;
@@ -695,7 +695,7 @@ void dp_link_train(struct drm_encoder *encoder,
 	if (!clock_recovery)
 		DRM_ERROR("clock recovery failed\n");
 	else
-		DRM_DEBUG("clock recovery at voltage %d pre-emphasis %d\n",
+		DRM_DEBUG_KMS("clock recovery at voltage %d pre-emphasis %d\n",
 			  train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
 			  (train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK) >>
 			  DP_TRAIN_PRE_EMPHASIS_SHIFT);
@@ -739,7 +739,7 @@ void dp_link_train(struct drm_encoder *encoder,
 	if (!channel_eq)
 		DRM_ERROR("channel eq failed\n");
 	else
-		DRM_DEBUG("channel eq at voltage %d pre-emphasis %d\n",
+		DRM_DEBUG_KMS("channel eq at voltage %d pre-emphasis %d\n",
 			  train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK,
 			  (train_set[0] & DP_TRAIN_PRE_EMPHASIS_MASK)
 			  >> DP_TRAIN_PRE_EMPHASIS_SHIFT);
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 1caf625e472..957d5067ad9 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -39,6 +39,23 @@
 static void evergreen_gpu_init(struct radeon_device *rdev);
 void evergreen_fini(struct radeon_device *rdev);
 
+/* get temperature in millidegrees */
+u32 evergreen_get_temp(struct radeon_device *rdev)
+{
+	u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
+		ASIC_T_SHIFT;
+	u32 actual_temp = 0;
+
+	if ((temp >> 10) & 1)
+		actual_temp = 0;
+	else if ((temp >> 9) & 1)
+		actual_temp = 255;
+	else
+		actual_temp = (temp >> 1) & 0xff;
+
+	return actual_temp * 1000;
+}
+
 void evergreen_pm_misc(struct radeon_device *rdev)
 {
 	int req_ps_idx = rdev->pm.requested_power_state_index;
@@ -1115,6 +1132,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 								 rdev->config.evergreen.max_backends) &
 								EVERGREEN_MAX_BACKENDS_MASK));
 
+	rdev->config.evergreen.tile_config = gb_addr_config;
 	WREG32(GB_BACKEND_MAP, gb_backend_map);
 	WREG32(GB_ADDR_CONFIG, gb_addr_config);
 	WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
@@ -1334,8 +1352,8 @@ int evergreen_mc_init(struct radeon_device *rdev)
 	}
 	rdev->mc.vram_width = numchan * chansize;
 	/* Could aper size report 0 ? */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	/* Setup GPU memory space */
 	/* size in MB on evergreen */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024;
diff --git a/drivers/gpu/drm/radeon/evergreen_reg.h b/drivers/gpu/drm/radeon/evergreen_reg.h
index e028c1cd9d9..2330f3a36fd 100644
--- a/drivers/gpu/drm/radeon/evergreen_reg.h
+++ b/drivers/gpu/drm/radeon/evergreen_reg.h
@@ -61,6 +61,11 @@
 #       define EVERGREEN_GRPH_FORMAT_8B_BGRA1010102     5
 #       define EVERGREEN_GRPH_FORMAT_RGB111110          6
 #       define EVERGREEN_GRPH_FORMAT_BGR101111          7
+#       define EVERGREEN_GRPH_ARRAY_MODE(x)             (((x) & 0x7) << 20)
+#       define EVERGREEN_GRPH_ARRAY_LINEAR_GENERAL      0
+#       define EVERGREEN_GRPH_ARRAY_LINEAR_ALIGNED      1
+#       define EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1      2
+#       define EVERGREEN_GRPH_ARRAY_2D_TILED_THIN1      4
 #define EVERGREEN_GRPH_SWAP_CONTROL                     0x680c
 #       define EVERGREEN_GRPH_ENDIAN_SWAP(x)            (((x) & 0x3) << 0)
 #       define EVERGREEN_GRPH_ENDIAN_NONE               0
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index a1cd621780e..9b7532dd30f 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -165,6 +165,11 @@
 #define		SE_DB_BUSY					(1 << 30)
 #define		SE_CB_BUSY					(1 << 31)
 
+#define	CG_MULT_THERMAL_STATUS				0x740
+#define		ASIC_T(x)			        ((x) << 16)
+#define		ASIC_T_MASK			        0x7FF0000
+#define		ASIC_T_SHIFT			        16
+
 #define	HDP_HOST_PATH_CNTL				0x2C00
 #define	HDP_NONSURFACE_BASE				0x2C04
 #define	HDP_NONSURFACE_INFO				0x2C08
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index a89a15ab524..e817a0bb5eb 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -141,7 +141,7 @@ void r100_pm_get_dynpm_state(struct radeon_device *rdev)
 	/* only one clock mode per power state */
 	rdev->pm.requested_clock_mode_index = 0;
 
-	DRM_DEBUG("Requested: e: %d m: %d p: %d\n",
+	DRM_DEBUG_DRIVER("Requested: e: %d m: %d p: %d\n",
 		  rdev->pm.power_state[rdev->pm.requested_power_state_index].
 		  clock_info[rdev->pm.requested_clock_mode_index].sclk,
 		  rdev->pm.power_state[rdev->pm.requested_power_state_index].
@@ -276,7 +276,7 @@ void r100_pm_misc(struct radeon_device *rdev)
 	     rdev->pm.power_state[rdev->pm.current_power_state_index].pcie_lanes)) {
 		radeon_set_pcie_lanes(rdev,
 				      ps->pcie_lanes);
-		DRM_DEBUG("Setting: p: %d\n", ps->pcie_lanes);
+		DRM_DEBUG_DRIVER("Setting: p: %d\n", ps->pcie_lanes);
 	}
 }
 
@@ -849,7 +849,7 @@ static int r100_cp_init_microcode(struct radeon_device *rdev)
 	const char *fw_name = NULL;
 	int err;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	pdev = platform_device_register_simple("radeon_cp", 0, NULL, 0);
 	err = IS_ERR(pdev);
@@ -1803,6 +1803,11 @@ static int r100_packet3_check(struct radeon_cs_parser *p,
 			return r;
 		break;
 		/* triggers drawing using indices to vertex buffer */
+	case PACKET3_3D_CLEAR_HIZ:
+	case PACKET3_3D_CLEAR_ZMASK:
+		if (p->rdev->hyperz_filp != p->filp)
+			return -EINVAL;
+		break;
 	case PACKET3_NOP:
 		break;
 	default:
@@ -2295,8 +2300,8 @@ void r100_vram_init_sizes(struct radeon_device *rdev)
 	u64 config_aper_size;
 
 	/* work out accessible VRAM */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	rdev->mc.visible_vram_size = r100_get_accessible_vram(rdev);
 	/* FIXME we don't use the second aperture yet when we could use it */
 	if (rdev->mc.visible_vram_size > rdev->mc.aper_size)
@@ -2364,11 +2369,10 @@ void r100_mc_init(struct radeon_device *rdev)
  */
 void r100_pll_errata_after_index(struct radeon_device *rdev)
 {
-	if (!(rdev->pll_errata & CHIP_ERRATA_PLL_DUMMYREADS)) {
-		return;
+	if (rdev->pll_errata & CHIP_ERRATA_PLL_DUMMYREADS) {
+		(void)RREG32(RADEON_CLOCK_CNTL_DATA);
+		(void)RREG32(RADEON_CRTC_GEN_CNTL);
 	}
-	(void)RREG32(RADEON_CLOCK_CNTL_DATA);
-	(void)RREG32(RADEON_CRTC_GEN_CNTL);
 }
 
 static void r100_pll_errata_after_data(struct radeon_device *rdev)
@@ -2643,7 +2647,7 @@ int r100_set_surface_reg(struct radeon_device *rdev, int reg,
 		flags |= pitch / 8;
 
 
-	DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+	DRM_DEBUG_KMS("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
 	WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
 	WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
 	WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
@@ -3039,7 +3043,7 @@ void r100_bandwidth_update(struct radeon_device *rdev)
 		}
 #endif
 
-		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+		DRM_DEBUG_KMS("GRPH_BUFFER_CNTL from to %x\n",
 			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
 			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
 	}
@@ -3135,7 +3139,7 @@ void r100_bandwidth_update(struct radeon_device *rdev)
 			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
 		}
 
-		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+		DRM_DEBUG_KMS("GRPH2_BUFFER_CNTL from to %x\n",
 			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
 	}
 }
@@ -3809,6 +3813,31 @@ void r100_fini(struct radeon_device *rdev)
 	rdev->bios = NULL;
 }
 
+/*
+ * Due to how kexec works, it can leave the hw fully initialised when it
+ * boots the new kernel. However doing our init sequence with the CP and
+ * WB stuff setup causes GPU hangs on the RN50 at least. So at startup
+ * do some quick sanity checks and restore sane values to avoid this
+ * problem.
+ */
+void r100_restore_sanity(struct radeon_device *rdev)
+{
+	u32 tmp;
+
+	tmp = RREG32(RADEON_CP_CSQ_CNTL);
+	if (tmp) {
+		WREG32(RADEON_CP_CSQ_CNTL, 0);
+	}
+	tmp = RREG32(RADEON_CP_RB_CNTL);
+	if (tmp) {
+		WREG32(RADEON_CP_RB_CNTL, 0);
+	}
+	tmp = RREG32(RADEON_SCRATCH_UMSK);
+	if (tmp) {
+		WREG32(RADEON_SCRATCH_UMSK, 0);
+	}
+}
+
 int r100_init(struct radeon_device *rdev)
 {
 	int r;
@@ -3821,6 +3850,8 @@ int r100_init(struct radeon_device *rdev)
 	radeon_scratch_init(rdev);
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
+	/* sanity check some register to avoid hangs like after kexec */
+	r100_restore_sanity(rdev);
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
diff --git a/drivers/gpu/drm/radeon/r100d.h b/drivers/gpu/drm/radeon/r100d.h
index d016b16fa11..b121b6c678d 100644
--- a/drivers/gpu/drm/radeon/r100d.h
+++ b/drivers/gpu/drm/radeon/r100d.h
@@ -48,10 +48,12 @@
 #define		PACKET3_3D_DRAW_IMMD		0x29
 #define		PACKET3_3D_DRAW_INDX		0x2A
 #define		PACKET3_3D_LOAD_VBPNTR		0x2F
+#define		PACKET3_3D_CLEAR_ZMASK		0x32
 #define		PACKET3_INDX_BUFFER		0x33
 #define		PACKET3_3D_DRAW_VBUF_2		0x34
 #define		PACKET3_3D_DRAW_IMMD_2		0x35
 #define		PACKET3_3D_DRAW_INDX_2		0x36
+#define		PACKET3_3D_CLEAR_HIZ		0x37
 #define		PACKET3_BITBLT_MULTI		0x9B
 
 #define PACKET0(reg, n)	(CP_PACKET0 |					\
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 19a7ef7ee34..c827738ad7d 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1048,14 +1048,47 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		/* RB3D_COLOR_CHANNEL_MASK */
 		track->color_channel_mask = idx_value;
 		break;
-	case 0x4d1c:
+	case 0x43a4:
+		/* SC_HYPERZ_EN */
+		/* r300c emits this register - we need to disable hyperz for it
+		 * without complaining */
+		if (p->rdev->hyperz_filp != p->filp) {
+			if (idx_value & 0x1)
+				ib[idx] = idx_value & ~1;
+		}
+		break;
+	case 0x4f1c:
 		/* ZB_BW_CNTL */
 		track->zb_cb_clear = !!(idx_value & (1 << 5));
+		if (p->rdev->hyperz_filp != p->filp) {
+			if (idx_value & (R300_HIZ_ENABLE |
+					 R300_RD_COMP_ENABLE |
+					 R300_WR_COMP_ENABLE |
+					 R300_FAST_FILL_ENABLE))
+				goto fail;
+		}
 		break;
 	case 0x4e04:
 		/* RB3D_BLENDCNTL */
 		track->blend_read_enable = !!(idx_value & (1 << 2));
 		break;
+	case 0x4f28: /* ZB_DEPTHCLEARVALUE */
+		break;
+	case 0x4f30: /* ZB_MASK_OFFSET */
+	case 0x4f34: /* ZB_ZMASK_PITCH */
+	case 0x4f44: /* ZB_HIZ_OFFSET */
+	case 0x4f54: /* ZB_HIZ_PITCH */
+		if (idx_value && (p->rdev->hyperz_filp != p->filp))
+			goto fail;
+		break;
+	case 0x4028:
+		if (idx_value && (p->rdev->hyperz_filp != p->filp))
+			goto fail;
+		/* GB_Z_PEQ_CONFIG */
+		if (p->rdev->family >= CHIP_RV350)
+			break;
+		goto fail;
+		break;
 	case 0x4be8:
 		/* valid register only on RV530 */
 		if (p->rdev->family == CHIP_RV530)
@@ -1066,8 +1099,8 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	}
 	return 0;
 fail:
-	printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
-	       reg, idx);
+	printk(KERN_ERR "Forbidden register 0x%04X in cs at %d (val=%08x)\n",
+	       reg, idx, idx_value);
 	return -EINVAL;
 }
 
@@ -1161,6 +1194,11 @@ static int r300_packet3_check(struct radeon_cs_parser *p,
 			return r;
 		}
 		break;
+	case PACKET3_3D_CLEAR_HIZ:
+	case PACKET3_3D_CLEAR_ZMASK:
+		if (p->rdev->hyperz_filp != p->filp)
+			return -EINVAL;
+		break;
 	case PACKET3_NOP:
 		break;
 	default:
@@ -1380,6 +1418,8 @@ int r300_init(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 	/* TODO: disable VGA need to use VGA request */
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
 		if (ASIC_IS_AVIVO(rdev))
diff --git a/drivers/gpu/drm/radeon/r300d.h b/drivers/gpu/drm/radeon/r300d.h
index 968a33317fb..0c036c60d9d 100644
--- a/drivers/gpu/drm/radeon/r300d.h
+++ b/drivers/gpu/drm/radeon/r300d.h
@@ -48,10 +48,12 @@
 #define		PACKET3_3D_DRAW_IMMD		0x29
 #define		PACKET3_3D_DRAW_INDX		0x2A
 #define		PACKET3_3D_LOAD_VBPNTR		0x2F
+#define		PACKET3_3D_CLEAR_ZMASK		0x32
 #define		PACKET3_INDX_BUFFER		0x33
 #define		PACKET3_3D_DRAW_VBUF_2		0x34
 #define		PACKET3_3D_DRAW_IMMD_2		0x35
 #define		PACKET3_3D_DRAW_INDX_2		0x36
+#define		PACKET3_3D_CLEAR_HIZ		0x37
 #define		PACKET3_BITBLT_MULTI		0x9B
 
 #define PACKET0(reg, n)	(CP_PACKET0 |					\
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index e6c89142bb4..59f7bccc5be 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -343,6 +343,8 @@ int r420_init(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 	/* TODO: disable VGA need to use VGA request */
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
 		if (ASIC_IS_AVIVO(rdev))
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index 93c9a2bbccf..6ac1f604e29 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -386,6 +386,11 @@
 #       define AVIVO_D1GRPH_TILED                               (1 << 20)
 #       define AVIVO_D1GRPH_MACRO_ADDRESS_MODE                  (1 << 21)
 
+#       define R600_D1GRPH_ARRAY_MODE_LINEAR_GENERAL            (0 << 20)
+#       define R600_D1GRPH_ARRAY_MODE_LINEAR_ALIGNED            (1 << 20)
+#       define R600_D1GRPH_ARRAY_MODE_1D_TILED_THIN1            (2 << 20)
+#       define R600_D1GRPH_ARRAY_MODE_2D_TILED_THIN1            (4 << 20)
+
 /* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2
  * block and vice versa.  This applies to GRPH, CUR, etc.
  */
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 694af7cc23a..1458dee902d 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -231,6 +231,8 @@ int r520_init(struct radeon_device *rdev)
 	radeon_scratch_init(rdev);
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index e100f69faee..d0ebae9dde2 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -92,6 +92,21 @@ void r600_gpu_init(struct radeon_device *rdev);
 void r600_fini(struct radeon_device *rdev);
 void r600_irq_disable(struct radeon_device *rdev);
 
+/* get temperature in millidegrees */
+u32 rv6xx_get_temp(struct radeon_device *rdev)
+{
+	u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
+		ASIC_T_SHIFT;
+	u32 actual_temp = 0;
+
+	if ((temp >> 7) & 1)
+		actual_temp = 0;
+	else
+		actual_temp = (temp >> 1) & 0xff;
+
+	return actual_temp * 1000;
+}
+
 void r600_pm_get_dynpm_state(struct radeon_device *rdev)
 {
 	int i;
@@ -256,7 +271,7 @@ void r600_pm_get_dynpm_state(struct radeon_device *rdev)
 		}
 	}
 
-	DRM_DEBUG("Requested: e: %d m: %d p: %d\n",
+	DRM_DEBUG_DRIVER("Requested: e: %d m: %d p: %d\n",
 		  rdev->pm.power_state[rdev->pm.requested_power_state_index].
 		  clock_info[rdev->pm.requested_clock_mode_index].sclk,
 		  rdev->pm.power_state[rdev->pm.requested_power_state_index].
@@ -571,7 +586,7 @@ void r600_pm_misc(struct radeon_device *rdev)
 		if (voltage->voltage != rdev->pm.current_vddc) {
 			radeon_atom_set_voltage(rdev, voltage->voltage);
 			rdev->pm.current_vddc = voltage->voltage;
-			DRM_DEBUG("Setting: v: %d\n", voltage->voltage);
+			DRM_DEBUG_DRIVER("Setting: v: %d\n", voltage->voltage);
 		}
 	}
 }
@@ -869,7 +884,17 @@ void r600_pcie_gart_tlb_flush(struct radeon_device *rdev)
 	u32 tmp;
 
 	/* flush hdp cache so updates hit vram */
-	WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+		void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+		u32 tmp;
+
+		/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
+		 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+		 */
+		WREG32(HDP_DEBUG1, 0);
+		tmp = readl((void __iomem *)ptr);
+	} else
+		WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
 
 	WREG32(VM_CONTEXT0_INVALIDATION_LOW_ADDR, rdev->mc.gtt_start >> 12);
 	WREG32(VM_CONTEXT0_INVALIDATION_HIGH_ADDR, (rdev->mc.gtt_end - 1) >> 12);
@@ -1217,8 +1242,8 @@ int r600_mc_init(struct radeon_device *rdev)
 	}
 	rdev->mc.vram_width = numchan * chansize;
 	/* Could aper size report 0 ? */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
@@ -1609,7 +1634,7 @@ void r600_gpu_init(struct radeon_device *rdev)
 							 r600_count_pipe_bits((cc_rb_backend_disable &
 									       R6XX_MAX_BACKENDS_MASK) >> 16)),
 							(cc_rb_backend_disable >> 16));
-
+	rdev->config.r600.tile_config = tiling_config;
 	tiling_config |= BACKEND_MAP(backend_map);
 	WREG32(GB_TILING_CONFIG, tiling_config);
 	WREG32(DCP_TILING_CONFIG, tiling_config & 0xffff);
@@ -3512,5 +3537,15 @@ int r600_debugfs_mc_info_init(struct radeon_device *rdev)
  */
 void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
 {
-	WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+	/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
+	 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+	 */
+	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+		void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
+		u32 tmp;
+
+		WREG32(HDP_DEBUG1, 0);
+		tmp = readl((void __iomem *)ptr);
+	} else
+		WREG32(R_005480_HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
 }
diff --git a/drivers/gpu/drm/radeon/r600_audio.c b/drivers/gpu/drm/radeon/r600_audio.c
index 2b26553c352..b5443fe1c1d 100644
--- a/drivers/gpu/drm/radeon/r600_audio.c
+++ b/drivers/gpu/drm/radeon/r600_audio.c
@@ -63,7 +63,8 @@ int r600_audio_bits_per_sample(struct radeon_device *rdev)
 	case 0x4: return 32;
 	}
 
-	DRM_ERROR("Unknown bits per sample 0x%x using 16 instead.\n", (int)value);
+	dev_err(rdev->dev, "Unknown bits per sample 0x%x using 16 instead\n",
+		(int)value);
 
 	return 16;
 }
@@ -150,7 +151,8 @@ static void r600_audio_update_hdmi(unsigned long param)
 			r600_hdmi_update_audio_settings(encoder);
 	}
 
-	if(still_going) r600_audio_schedule_polling(rdev);
+	if (still_going)
+		r600_audio_schedule_polling(rdev);
 }
 
 /*
@@ -158,8 +160,9 @@ static void r600_audio_update_hdmi(unsigned long param)
  */
 static void r600_audio_engine_enable(struct radeon_device *rdev, bool enable)
 {
-	DRM_INFO("%s audio support", enable ? "Enabling" : "Disabling");
+	DRM_INFO("%s audio support\n", enable ? "Enabling" : "Disabling");
 	WREG32_P(R600_AUDIO_ENABLE, enable ? 0x81000000 : 0x0, ~0x81000000);
+	rdev->audio_enabled = enable;
 }
 
 /*
@@ -195,12 +198,14 @@ void r600_audio_enable_polling(struct drm_encoder *encoder)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 
-	DRM_DEBUG("r600_audio_enable_polling: %d", radeon_encoder->audio_polling_active);
+	DRM_DEBUG("r600_audio_enable_polling: %d\n",
+		radeon_encoder->audio_polling_active);
 	if (radeon_encoder->audio_polling_active)
 		return;
 
 	radeon_encoder->audio_polling_active = 1;
-	mod_timer(&rdev->audio_timer, jiffies + 1);
+	if (rdev->audio_enabled)
+		mod_timer(&rdev->audio_timer, jiffies + 1);
 }
 
 /*
@@ -209,7 +214,8 @@ void r600_audio_enable_polling(struct drm_encoder *encoder)
 void r600_audio_disable_polling(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	DRM_DEBUG("r600_audio_disable_polling: %d", radeon_encoder->audio_polling_active);
+	DRM_DEBUG("r600_audio_disable_polling: %d\n",
+		radeon_encoder->audio_polling_active);
 	radeon_encoder->audio_polling_active = 0;
 }
 
@@ -236,7 +242,7 @@ void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
 		WREG32_P(R600_AUDIO_TIMING, 0x100, ~0x301);
 		break;
 	default:
-		DRM_ERROR("Unsupported encoder type 0x%02X\n",
+		dev_err(rdev->dev, "Unsupported encoder type 0x%02X\n",
 			  radeon_encoder->encoder_id);
 		return;
 	}
@@ -266,7 +272,7 @@ void r600_audio_set_clock(struct drm_encoder *encoder, int clock)
  */
 void r600_audio_fini(struct radeon_device *rdev)
 {
-	if (!radeon_audio || !r600_audio_chipset_supported(rdev))
+	if (!rdev->audio_enabled)
 		return;
 
 	del_timer(&rdev->audio_timer);
diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.c b/drivers/gpu/drm/radeon/r600_blit_shaders.c
index 0271b53fa2d..e8151c1d55b 100644
--- a/drivers/gpu/drm/radeon/r600_blit_shaders.c
+++ b/drivers/gpu/drm/radeon/r600_blit_shaders.c
@@ -39,37 +39,45 @@
 
 const u32 r6xx_default_state[] =
 {
-	0xc0002400,
+	0xc0002400, /* START_3D_CMDBUF */
 	0x00000000,
-	0xc0012800,
+
+	0xc0012800, /* CONTEXT_CONTROL */
 	0x80000000,
 	0x80000000,
+
 	0xc0016800,
 	0x00000010,
-	0x00008000,
+	0x00008000, /* WAIT_UNTIL */
+
 	0xc0016800,
 	0x00000542,
-	0x07000003,
+	0x07000003, /* TA_CNTL_AUX */
+
 	0xc0016800,
 	0x000005c5,
-	0x00000000,
+	0x00000000, /* VC_ENHANCE */
+
 	0xc0016800,
 	0x00000363,
-	0x00000000,
+	0x00000000, /* SQ_DYN_GPR_CNTL_PS_FLUSH_REQ */
+
 	0xc0016800,
 	0x0000060c,
-	0x82000000,
+	0x82000000, /* DB_DEBUG */
+
 	0xc0016800,
 	0x0000060e,
-	0x01020204,
-	0xc0016f00,
-	0x00000000,
-	0x00000000,
-	0xc0016f00,
-	0x00000001,
+	0x01020204, /* DB_WATERMARKS */
+
+	0xc0026f00,
 	0x00000000,
+	0x00000000, /* SQ_VTX_BASE_VTX_LOC */
+	0x00000000, /* SQ_VTX_START_INST_LOC */
+
 	0xc0096900,
 	0x0000022a,
+	0x00000000, /* SQ_ESGS_RING_ITEMSIZE */
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -78,515 +86,317 @@ const u32 r6xx_default_state[] =
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000000,
+
 	0xc0016900,
 	0x00000004,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* DB_DEPTH_INFO */
+
+	0xc0026900,
 	0x0000000a,
-	0x00000000,
-	0xc0016900,
-	0x0000000b,
-	0x00000000,
-	0xc0016900,
-	0x0000010c,
-	0x00000000,
-	0xc0016900,
-	0x0000010d,
-	0x00000000,
+	0x00000000, /* DB_STENCIL_CLEAR */
+	0x00000000, /* DB_DEPTH_CLEAR */
+
 	0xc0016900,
 	0x00000200,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* DB_DEPTH_CONTROL */
+
+	0xc0026900,
 	0x00000343,
-	0x00000060,
-	0xc0016900,
-	0x00000344,
-	0x00000040,
+	0x00000060, /* DB_RENDER_CONTROL */
+	0x00000040, /* DB_RENDER_OVERRIDE */
+
 	0xc0016900,
 	0x00000351,
-	0x0000aa00,
-	0xc0016900,
-	0x00000104,
-	0x00000000,
-	0xc0016900,
-	0x0000010e,
-	0x00000000,
-	0xc0046900,
-	0x00000105,
-	0x00000000,
-	0x00000000,
+	0x0000aa00, /* DB_ALPHA_TO_MASK */
+
+	0xc00f6900,
+	0x00000100,
+	0x00000800, /* VGT_MAX_VTX_INDX */
+	0x00000000, /* VGT_MIN_VTX_INDX */
+	0x00000000, /* VGT_INDX_OFFSET */
+	0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */
+	0x00000000, /* SX_ALPHA_TEST_CONTROL */
+	0x00000000, /* CB_BLEND_RED */
 	0x00000000,
 	0x00000000,
-	0xc0036900,
-	0x00000109,
 	0x00000000,
+	0x00000000, /* CB_FOG_RED */
 	0x00000000,
 	0x00000000,
+	0x00000000, /* DB_STENCILREFMASK */
+	0x00000000, /* DB_STENCILREFMASK_BF */
+	0x00000000, /* SX_ALPHA_REF */
+
 	0xc0046900,
 	0x0000030c,
-	0x01000000,
+	0x01000000, /* CB_CLRCMP_CNTL */
 	0x00000000,
 	0x00000000,
 	0x00000000,
+
 	0xc0046900,
 	0x00000048,
-	0x3f800000,
+	0x3f800000, /* CB_CLEAR_RED */
 	0x00000000,
 	0x3f800000,
 	0x3f800000,
-	0xc0016900,
-	0x0000008e,
-	0x0000000f,
+
 	0xc0016900,
 	0x00000080,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* PA_SC_WINDOW_OFFSET */
+
+	0xc00a6900,
 	0x00000083,
-	0x0000ffff,
-	0xc0016900,
-	0x00000084,
-	0x00000000,
-	0xc0016900,
-	0x00000085,
+	0x0000ffff, /* PA_SC_CLIP_RECT_RULE */
+	0x00000000, /* PA_SC_CLIPRECT_0_TL */
 	0x20002000,
-	0xc0016900,
-	0x00000086,
 	0x00000000,
-	0xc0016900,
-	0x00000087,
 	0x20002000,
-	0xc0016900,
-	0x00000088,
 	0x00000000,
-	0xc0016900,
-	0x00000089,
 	0x20002000,
-	0xc0016900,
-	0x0000008a,
 	0x00000000,
-	0xc0016900,
-	0x0000008b,
 	0x20002000,
-	0xc0016900,
-	0x0000008c,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* PA_SC_EDGERULE */
+
+	0xc0406900,
 	0x00000094,
-	0x80000000,
-	0xc0016900,
-	0x00000095,
+	0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */
+	0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */
+	0x80000000, /* PA_SC_VPORT_SCISSOR_1_TL */
 	0x20002000,
-	0xc0026900,
-	0x000000b4,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x00000096,
 	0x80000000,
-	0xc0016900,
-	0x00000097,
 	0x20002000,
-	0xc0026900,
-	0x000000b6,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x00000098,
 	0x80000000,
-	0xc0016900,
-	0x00000099,
 	0x20002000,
-	0xc0026900,
-	0x000000b8,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009a,
 	0x80000000,
-	0xc0016900,
-	0x0000009b,
 	0x20002000,
-	0xc0026900,
-	0x000000ba,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009c,
 	0x80000000,
-	0xc0016900,
-	0x0000009d,
 	0x20002000,
-	0xc0026900,
-	0x000000bc,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009e,
 	0x80000000,
-	0xc0016900,
-	0x0000009f,
 	0x20002000,
-	0xc0026900,
-	0x000000be,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a0,
 	0x80000000,
-	0xc0016900,
-	0x000000a1,
 	0x20002000,
-	0xc0026900,
-	0x000000c0,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a2,
 	0x80000000,
-	0xc0016900,
-	0x000000a3,
 	0x20002000,
-	0xc0026900,
-	0x000000c2,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a4,
 	0x80000000,
-	0xc0016900,
-	0x000000a5,
 	0x20002000,
-	0xc0026900,
-	0x000000c4,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a6,
 	0x80000000,
-	0xc0016900,
-	0x000000a7,
 	0x20002000,
-	0xc0026900,
-	0x000000c6,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a8,
 	0x80000000,
-	0xc0016900,
-	0x000000a9,
 	0x20002000,
-	0xc0026900,
-	0x000000c8,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000aa,
 	0x80000000,
-	0xc0016900,
-	0x000000ab,
 	0x20002000,
-	0xc0026900,
-	0x000000ca,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000ac,
 	0x80000000,
-	0xc0016900,
-	0x000000ad,
 	0x20002000,
-	0xc0026900,
-	0x000000cc,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000ae,
 	0x80000000,
-	0xc0016900,
-	0x000000af,
 	0x20002000,
-	0xc0026900,
-	0x000000ce,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000b0,
 	0x80000000,
-	0xc0016900,
-	0x000000b1,
 	0x20002000,
-	0xc0026900,
-	0x000000d0,
-	0x00000000,
+	0x00000000, /* PA_SC_VPORT_ZMIN_0 */
 	0x3f800000,
-	0xc0016900,
-	0x000000b2,
-	0x80000000,
-	0xc0016900,
-	0x000000b3,
-	0x20002000,
-	0xc0026900,
-	0x000000d2,
 	0x00000000,
 	0x3f800000,
-	0xc0016900,
-	0x00000293,
-	0x00004010,
-	0xc0016900,
-	0x00000300,
 	0x00000000,
-	0xc0016900,
-	0x00000301,
-	0x00000000,
-	0xc0016900,
-	0x00000312,
-	0xffffffff,
-	0xc0016900,
-	0x00000307,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000308,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000283,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000292,
+	0x3f800000,
 	0x00000000,
-	0xc0066900,
-	0x0000010f,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000206,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000207,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000208,
+	0x3f800000,
 	0x00000000,
-	0xc0046900,
-	0x00000303,
 	0x3f800000,
+
+	0xc0026900,
+	0x00000292,
+	0x00000000, /* PA_SC_MPASS_PS_CNTL */
+	0x00004010, /* PA_SC_MODE_CNTL */
+
+	0xc0096900,
+	0x00000300,
+	0x00000000, /* PA_SC_LINE_CNTL */
+	0x00000000, /* PA_SC_AA_CONFIG */
+	0x0000002d, /* PA_SU_VTX_CNTL */
+	0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */
 	0x3f800000,
 	0x3f800000,
 	0x3f800000,
-	0xc0016900,
-	0x00000205,
-	0x00000004,
-	0xc0016900,
-	0x00000280,
-	0x00000000,
-	0xc0016900,
-	0x00000281,
+	0x00000000, /* PA_SC_SAMPLE_LOCS_MCTX */
 	0x00000000,
+
 	0xc0016900,
+	0x00000312,
+	0xffffffff, /* PA_SC_AA_MASK */
+
+	0xc0066900,
 	0x0000037e,
-	0x00000000,
-	0xc0016900,
-	0x00000382,
-	0x00000000,
-	0xc0016900,
-	0x00000380,
-	0x00000000,
-	0xc0016900,
-	0x00000383,
-	0x00000000,
-	0xc0016900,
-	0x00000381,
-	0x00000000,
-	0xc0016900,
-	0x00000282,
-	0x00000008,
-	0xc0016900,
-	0x00000302,
-	0x0000002d,
-	0xc0016900,
-	0x0000037f,
-	0x00000000,
-	0xc0016900,
-	0x000001b2,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */
+	0x00000000, /* PA_SU_POLY_OFFSET_CLAMP */
+	0x00000000, /* PA_SU_POLY_OFFSET_FRONT_SCALE */
+	0x00000000, /* PA_SU_POLY_OFFSET_FRONT_OFFSET */
+	0x00000000, /* PA_SU_POLY_OFFSET_BACK_SCALE */
+	0x00000000, /* PA_SU_POLY_OFFSET_BACK_OFFSET */
+
+	0xc0046900,
 	0x000001b6,
-	0x00000000,
-	0xc0016900,
-	0x000001b7,
-	0x00000000,
-	0xc0016900,
-	0x000001b8,
-	0x00000000,
-	0xc0016900,
-	0x000001b9,
-	0x00000000,
+	0x00000000, /* SPI_INPUT_Z */
+	0x00000000, /* SPI_FOG_CNTL */
+	0x00000000, /* SPI_FOG_FUNC_SCALE */
+	0x00000000, /* SPI_FOG_FUNC_BIAS */
+
 	0xc0016900,
 	0x00000225,
-	0x00000000,
+	0x00000000, /* SQ_PGM_START_FS */
+
 	0xc0016900,
 	0x00000229,
-	0x00000000,
+	0x00000000, /* SQ_PGM_RESOURCES_FS */
+
 	0xc0016900,
 	0x00000237,
-	0x00000000,
-	0xc0016900,
-	0x00000100,
-	0x00000800,
-	0xc0016900,
-	0x00000101,
-	0x00000000,
-	0xc0016900,
-	0x00000102,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* SQ_PGM_CF_OFFSET_FS */
+
+	0xc0026900,
 	0x000002a8,
-	0x00000000,
-	0xc0016900,
-	0x000002a9,
-	0x00000000,
-	0xc0016900,
-	0x00000103,
-	0x00000000,
-	0xc0016900,
-	0x00000284,
-	0x00000000,
-	0xc0016900,
-	0x00000290,
-	0x00000000,
-	0xc0016900,
-	0x00000285,
-	0x00000000,
-	0xc0016900,
-	0x00000286,
-	0x00000000,
-	0xc0016900,
-	0x00000287,
-	0x00000000,
-	0xc0016900,
-	0x00000288,
-	0x00000000,
-	0xc0016900,
-	0x00000289,
-	0x00000000,
-	0xc0016900,
-	0x0000028a,
-	0x00000000,
-	0xc0016900,
-	0x0000028b,
-	0x00000000,
-	0xc0016900,
-	0x0000028c,
-	0x00000000,
-	0xc0016900,
-	0x0000028d,
-	0x00000000,
-	0xc0016900,
-	0x0000028e,
-	0x00000000,
-	0xc0016900,
-	0x0000028f,
-	0x00000000,
+	0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */
+	0x00000000, /* VGT_INSTANCE_STEP_RATE_1 */
+
+	0xc0116900,
+	0x00000280,
+	0x00000000, /* PA_SU_POINT_SIZE */
+	0x00000000, /* PA_SU_POINT_MINMAX */
+	0x00000008, /* PA_SU_LINE_CNTL */
+	0x00000000, /* PA_SC_LINE_STIPPLE */
+	0x00000000, /* VGT_OUTPUT_PATH_CNTL */
+	0x00000000, /* VGT_HOS_CNTL */
+	0x00000000, /* VGT_HOS_MAX_TESS_LEVEL */
+	0x00000000, /* VGT_HOS_MIN_TESS_LEVEL */
+	0x00000000, /* VGT_HOS_REUSE_DEPTH */
+	0x00000000, /* VGT_GROUP_PRIM_TYPE */
+	0x00000000, /* VGT_GROUP_FIRST_DECR */
+	0x00000000, /* VGT_GROUP_DECR */
+	0x00000000, /* VGT_GROUP_VECT_0_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_1_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_0_FMT_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_1_FMT_CNTL */
+	0x00000000, /* VGT_GS_MODE */
+
 	0xc0016900,
 	0x000002a1,
-	0x00000000,
+	0x00000000, /* VGT_PRIMITIVEID_EN */
+
 	0xc0016900,
 	0x000002a5,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* VGT_MULTI_PRIM_ID_RESET_EN */
+
+	0xc0036900,
 	0x000002ac,
-	0x00000000,
-	0xc0016900,
-	0x000002ad,
-	0x00000000,
-	0xc0016900,
-	0x000002ae,
-	0x00000000,
+	0x00000000, /* VGT_STRMOUT_EN */
+	0x00000000, /* VGT_REUSE_OFF */
+	0x00000000, /* VGT_VTX_CNT_EN */
+
 	0xc0016900,
 	0x000002c8,
-	0x00000000,
-	0xc0016900,
-	0x00000206,
-	0x00000100,
-	0xc0016900,
-	0x00000204,
-	0x00010000,
-	0xc0036e00,
-	0x00000000,
-	0x00000012,
-	0x00000000,
-	0x00000000,
-	0xc0016900,
-	0x0000008f,
-	0x0000000f,
-	0xc0016900,
-	0x000001e8,
-	0x00000001,
-	0xc0016900,
+	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
+
+	0xc0076900,
 	0x00000202,
-	0x00cc0000,
+	0x00cc0000, /* CB_COLOR_CONTROL */
+	0x00000210, /* DB_SHADER_CNTL */
+	0x00010000, /* PA_CL_CLIP_CNTL */
+	0x00000244, /* PA_SU_SC_MODE_CNTL */
+	0x00000100, /* PA_CL_VTE_CNTL */
+	0x00000000, /* PA_CL_VS_OUT_CNTL */
+	0x00000000, /* PA_CL_NANINF_CNTL */
+
+	0xc0026900,
+	0x0000008e,
+	0x0000000f, /* CB_TARGET_MASK */
+	0x0000000f, /* CB_SHADER_MASK */
+
 	0xc0016900,
-	0x00000205,
-	0x00000244,
+	0x000001e8,
+	0x00000001, /* CB_SHADER_CONTROL */
+
 	0xc0016900,
-	0x00000203,
-	0x00000210,
+	0x00000185,
+	0x00000000, /* SPI_VS_OUT_ID_0 */
+
 	0xc0016900,
+	0x00000191,
+	0x00000b00, /* SPI_PS_INPUT_CNTL_0 */
+
+	0xc0056900,
 	0x000001b1,
+	0x00000000, /* SPI_VS_OUT_CONFIG */
+	0x00000000, /* SPI_THREAD_GROUPING */
+	0x00000001, /* SPI_PS_IN_CONTROL_0 */
+	0x00000000, /* SPI_PS_IN_CONTROL_1 */
+	0x00000000, /* SPI_INTERP_CONTROL_0 */
+
+	0xc0036e00, /* SET_SAMPLER */
 	0x00000000,
-	0xc0016900,
-	0x00000185,
-	0x00000000,
-	0xc0016900,
-	0x000001b3,
-	0x00000001,
-	0xc0016900,
-	0x000001b4,
+	0x00000012,
 	0x00000000,
-	0xc0016900,
-	0x00000191,
-	0x00000b00,
-	0xc0016900,
-	0x000001b5,
 	0x00000000,
 };
 
 const u32 r7xx_default_state[] =
 {
-	0xc0012800,
+	0xc0012800, /* CONTEXT_CONTROL */
 	0x80000000,
 	0x80000000,
+
 	0xc0016800,
 	0x00000010,
-	0x00008000,
+	0x00008000, /* WAIT_UNTIL */
+
 	0xc0016800,
 	0x00000542,
-	0x07000002,
+	0x07000002, /* TA_CNTL_AUX */
+
 	0xc0016800,
 	0x000005c5,
-	0x00000000,
+	0x00000000, /* VC_ENHANCE */
+
 	0xc0016800,
 	0x00000363,
-	0x00004000,
+	0x00004000, /* SQ_DYN_GPR_CNTL_PS_FLUSH_REQ */
+
 	0xc0016800,
 	0x0000060c,
-	0x00000000,
+	0x00000000, /* DB_DEBUG */
+
 	0xc0016800,
 	0x0000060e,
-	0x00420204,
-	0xc0016f00,
-	0x00000000,
-	0x00000000,
-	0xc0016f00,
-	0x00000001,
+	0x00420204, /* DB_WATERMARKS */
+
+	0xc0026f00,
 	0x00000000,
+	0x00000000, /* SQ_VTX_BASE_VTX_LOC */
+	0x00000000, /* SQ_VTX_START_INST_LOC */
+
 	0xc0096900,
 	0x0000022a,
+	0x00000000, /* SQ_ESGS_RING_ITEMSIZE */
 	0x00000000,
 	0x00000000,
 	0x00000000,
@@ -595,470 +405,269 @@ const u32 r7xx_default_state[] =
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0x00000000,
+
 	0xc0016900,
 	0x00000004,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* DB_DEPTH_INFO */
+
+	0xc0026900,
 	0x0000000a,
-	0x00000000,
-	0xc0016900,
-	0x0000000b,
-	0x00000000,
-	0xc0016900,
-	0x0000010c,
-	0x00000000,
-	0xc0016900,
-	0x0000010d,
-	0x00000000,
+	0x00000000, /* DB_STENCIL_CLEAR */
+	0x00000000, /* DB_DEPTH_CLEAR */
+
 	0xc0016900,
 	0x00000200,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* DB_DEPTH_CONTROL */
+
+	0xc0026900,
 	0x00000343,
-	0x00000060,
-	0xc0016900,
-	0x00000344,
-	0x00000000,
+	0x00000060, /* DB_RENDER_CONTROL */
+	0x00000000, /* DB_RENDER_OVERRIDE */
+
 	0xc0016900,
 	0x00000351,
-	0x0000aa00,
-	0xc0016900,
-	0x00000104,
-	0x00000000,
-	0xc0016900,
-	0x0000010e,
-	0x00000000,
-	0xc0046900,
-	0x00000105,
-	0x00000000,
+	0x0000aa00, /* DB_ALPHA_TO_MASK */
+
+	0xc0096900,
+	0x00000100,
+	0x00000800, /* VGT_MAX_VTX_INDX */
+	0x00000000, /* VGT_MIN_VTX_INDX */
+	0x00000000, /* VGT_INDX_OFFSET */
+	0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */
+	0x00000000, /* SX_ALPHA_TEST_CONTROL */
+	0x00000000, /* CB_BLEND_RED */
 	0x00000000,
 	0x00000000,
 	0x00000000,
+
+	0xc0036900,
+	0x0000010c,
+	0x00000000, /* DB_STENCILREFMASK */
+	0x00000000, /* DB_STENCILREFMASK_BF */
+	0x00000000, /* SX_ALPHA_REF */
+
 	0xc0046900,
-	0x0000030c,
+	0x0000030c, /* CB_CLRCMP_CNTL */
 	0x01000000,
 	0x00000000,
 	0x00000000,
 	0x00000000,
-	0xc0016900,
-	0x0000008e,
-	0x0000000f,
+
 	0xc0016900,
 	0x00000080,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* PA_SC_WINDOW_OFFSET */
+
+	0xc00a6900,
 	0x00000083,
-	0x0000ffff,
-	0xc0016900,
-	0x00000084,
-	0x00000000,
-	0xc0016900,
-	0x00000085,
+	0x0000ffff, /* PA_SC_CLIP_RECT_RULE */
+	0x00000000, /* PA_SC_CLIPRECT_0_TL */
 	0x20002000,
-	0xc0016900,
-	0x00000086,
 	0x00000000,
-	0xc0016900,
-	0x00000087,
 	0x20002000,
-	0xc0016900,
-	0x00000088,
 	0x00000000,
-	0xc0016900,
-	0x00000089,
 	0x20002000,
-	0xc0016900,
-	0x0000008a,
 	0x00000000,
-	0xc0016900,
-	0x0000008b,
 	0x20002000,
-	0xc0016900,
-	0x0000008c,
-	0xaaaaaaaa,
-	0xc0016900,
+	0xaaaaaaaa, /* PA_SC_EDGERULE */
+
+	0xc0406900,
 	0x00000094,
-	0x80000000,
-	0xc0016900,
-	0x00000095,
+	0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */
+	0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */
+	0x80000000, /* PA_SC_VPORT_SCISSOR_1_TL */
 	0x20002000,
-	0xc0026900,
-	0x000000b4,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x00000096,
 	0x80000000,
-	0xc0016900,
-	0x00000097,
 	0x20002000,
-	0xc0026900,
-	0x000000b6,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x00000098,
 	0x80000000,
-	0xc0016900,
-	0x00000099,
 	0x20002000,
-	0xc0026900,
-	0x000000b8,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009a,
 	0x80000000,
-	0xc0016900,
-	0x0000009b,
 	0x20002000,
-	0xc0026900,
-	0x000000ba,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009c,
 	0x80000000,
-	0xc0016900,
-	0x0000009d,
 	0x20002000,
-	0xc0026900,
-	0x000000bc,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x0000009e,
 	0x80000000,
-	0xc0016900,
-	0x0000009f,
 	0x20002000,
-	0xc0026900,
-	0x000000be,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a0,
 	0x80000000,
-	0xc0016900,
-	0x000000a1,
 	0x20002000,
-	0xc0026900,
-	0x000000c0,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a2,
 	0x80000000,
-	0xc0016900,
-	0x000000a3,
 	0x20002000,
-	0xc0026900,
-	0x000000c2,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a4,
 	0x80000000,
-	0xc0016900,
-	0x000000a5,
 	0x20002000,
-	0xc0026900,
-	0x000000c4,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a6,
 	0x80000000,
-	0xc0016900,
-	0x000000a7,
 	0x20002000,
-	0xc0026900,
-	0x000000c6,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000a8,
 	0x80000000,
-	0xc0016900,
-	0x000000a9,
 	0x20002000,
-	0xc0026900,
-	0x000000c8,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000aa,
 	0x80000000,
-	0xc0016900,
-	0x000000ab,
 	0x20002000,
-	0xc0026900,
-	0x000000ca,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000ac,
 	0x80000000,
-	0xc0016900,
-	0x000000ad,
 	0x20002000,
-	0xc0026900,
-	0x000000cc,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000ae,
 	0x80000000,
-	0xc0016900,
-	0x000000af,
 	0x20002000,
-	0xc0026900,
-	0x000000ce,
-	0x00000000,
-	0x3f800000,
-	0xc0016900,
-	0x000000b0,
 	0x80000000,
-	0xc0016900,
-	0x000000b1,
 	0x20002000,
-	0xc0026900,
-	0x000000d0,
-	0x00000000,
+	0x00000000, /* PA_SC_VPORT_ZMIN_0 */
 	0x3f800000,
-	0xc0016900,
-	0x000000b2,
-	0x80000000,
-	0xc0016900,
-	0x000000b3,
-	0x20002000,
-	0xc0026900,
-	0x000000d2,
 	0x00000000,
 	0x3f800000,
-	0xc0016900,
-	0x00000293,
-	0x00514000,
-	0xc0016900,
-	0x00000300,
-	0x00000000,
-	0xc0016900,
-	0x00000301,
 	0x00000000,
-	0xc0016900,
-	0x00000312,
-	0xffffffff,
-	0xc0016900,
-	0x00000307,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000308,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000283,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000292,
+	0x3f800000,
 	0x00000000,
-	0xc0066900,
-	0x0000010f,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000206,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000207,
+	0x3f800000,
 	0x00000000,
-	0xc0016900,
-	0x00000208,
+	0x3f800000,
 	0x00000000,
-	0xc0046900,
-	0x00000303,
 	0x3f800000,
+
+	0xc0026900,
+	0x00000292,
+	0x00000000, /* PA_SC_MPASS_PS_CNTL */
+	0x00514000, /* PA_SC_MODE_CNTL */
+
+	0xc0096900,
+	0x00000300,
+	0x00000000, /* PA_SC_LINE_CNTL */
+	0x00000000, /* PA_SC_AA_CONFIG */
+	0x0000002d, /* PA_SU_VTX_CNTL */
+	0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */
 	0x3f800000,
 	0x3f800000,
 	0x3f800000,
-	0xc0016900,
-	0x00000205,
-	0x00000004,
-	0xc0016900,
-	0x00000280,
-	0x00000000,
-	0xc0016900,
-	0x00000281,
+	0x00000000, /* PA_SC_SAMPLE_LOCS_MCTX */
 	0x00000000,
+
 	0xc0016900,
+	0x00000312,
+	0xffffffff, /* PA_SC_AA_MASK */
+
+	0xc0066900,
 	0x0000037e,
-	0x00000000,
-	0xc0016900,
-	0x00000382,
-	0x00000000,
-	0xc0016900,
-	0x00000380,
-	0x00000000,
-	0xc0016900,
-	0x00000383,
-	0x00000000,
-	0xc0016900,
-	0x00000381,
-	0x00000000,
-	0xc0016900,
-	0x00000282,
-	0x00000008,
-	0xc0016900,
-	0x00000302,
-	0x0000002d,
-	0xc0016900,
-	0x0000037f,
-	0x00000000,
-	0xc0016900,
-	0x000001b2,
-	0x00000001,
-	0xc0016900,
+	0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */
+	0x00000000, /* PA_SU_POLY_OFFSET_CLAMP */
+	0x00000000, /* PA_SU_POLY_OFFSET_FRONT_SCALE */
+	0x00000000, /* PA_SU_POLY_OFFSET_FRONT_OFFSET */
+	0x00000000, /* PA_SU_POLY_OFFSET_BACK_SCALE */
+	0x00000000, /* PA_SU_POLY_OFFSET_BACK_OFFSET */
+
+	0xc0046900,
 	0x000001b6,
-	0x00000000,
-	0xc0016900,
-	0x000001b7,
-	0x00000000,
-	0xc0016900,
-	0x000001b8,
-	0x00000000,
-	0xc0016900,
-	0x000001b9,
-	0x00000000,
+	0x00000000, /* SPI_INPUT_Z */
+	0x00000000, /* SPI_FOG_CNTL */
+	0x00000000, /* SPI_FOG_FUNC_SCALE */
+	0x00000000, /* SPI_FOG_FUNC_BIAS */
+
 	0xc0016900,
 	0x00000225,
-	0x00000000,
+	0x00000000, /* SQ_PGM_START_FS */
+
 	0xc0016900,
 	0x00000229,
-	0x00000000,
+	0x00000000, /* SQ_PGM_RESOURCES_FS */
+
 	0xc0016900,
 	0x00000237,
-	0x00000000,
-	0xc0016900,
-	0x00000100,
-	0x00000800,
-	0xc0016900,
-	0x00000101,
-	0x00000000,
-	0xc0016900,
-	0x00000102,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* SQ_PGM_CF_OFFSET_FS */
+
+	0xc0026900,
 	0x000002a8,
-	0x00000000,
-	0xc0016900,
-	0x000002a9,
-	0x00000000,
-	0xc0016900,
-	0x00000103,
-	0x00000000,
-	0xc0016900,
-	0x00000284,
-	0x00000000,
-	0xc0016900,
-	0x00000290,
-	0x00000000,
-	0xc0016900,
-	0x00000285,
-	0x00000000,
-	0xc0016900,
-	0x00000286,
-	0x00000000,
-	0xc0016900,
-	0x00000287,
-	0x00000000,
-	0xc0016900,
-	0x00000288,
-	0x00000000,
-	0xc0016900,
-	0x00000289,
-	0x00000000,
-	0xc0016900,
-	0x0000028a,
-	0x00000000,
-	0xc0016900,
-	0x0000028b,
-	0x00000000,
-	0xc0016900,
-	0x0000028c,
-	0x00000000,
-	0xc0016900,
-	0x0000028d,
-	0x00000000,
-	0xc0016900,
-	0x0000028e,
-	0x00000000,
-	0xc0016900,
-	0x0000028f,
-	0x00000000,
+	0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */
+	0x00000000, /* VGT_INSTANCE_STEP_RATE_1 */
+
+	0xc0116900,
+	0x00000280,
+	0x00000000, /* PA_SU_POINT_SIZE */
+	0x00000000, /* PA_SU_POINT_MINMAX */
+	0x00000008, /* PA_SU_LINE_CNTL */
+	0x00000000, /* PA_SC_LINE_STIPPLE */
+	0x00000000, /* VGT_OUTPUT_PATH_CNTL */
+	0x00000000, /* VGT_HOS_CNTL */
+	0x00000000, /* VGT_HOS_MAX_TESS_LEVEL */
+	0x00000000, /* VGT_HOS_MIN_TESS_LEVEL */
+	0x00000000, /* VGT_HOS_REUSE_DEPTH */
+	0x00000000, /* VGT_GROUP_PRIM_TYPE */
+	0x00000000, /* VGT_GROUP_FIRST_DECR */
+	0x00000000, /* VGT_GROUP_DECR */
+	0x00000000, /* VGT_GROUP_VECT_0_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_1_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_0_FMT_CNTL */
+	0x00000000, /* VGT_GROUP_VECT_1_FMT_CNTL */
+	0x00000000, /* VGT_GS_MODE */
+
 	0xc0016900,
 	0x000002a1,
-	0x00000000,
+	0x00000000, /* VGT_PRIMITIVEID_EN */
+
 	0xc0016900,
 	0x000002a5,
-	0x00000000,
-	0xc0016900,
+	0x00000000, /* VGT_MULTI_PRIM_ID_RESET_EN */
+
+	0xc0036900,
 	0x000002ac,
-	0x00000000,
-	0xc0016900,
-	0x000002ad,
-	0x00000000,
-	0xc0016900,
-	0x000002ae,
-	0x00000000,
+	0x00000000, /* VGT_STRMOUT_EN */
+	0x00000000, /* VGT_REUSE_OFF */
+	0x00000000, /* VGT_VTX_CNT_EN */
+
 	0xc0016900,
 	0x000002c8,
-	0x00000000,
-	0xc0016900,
-	0x00000206,
-	0x00000100,
-	0xc0016900,
-	0x00000204,
-	0x00010000,
-	0xc0036e00,
-	0x00000000,
-	0x00000012,
-	0x00000000,
-	0x00000000,
-	0xc0016900,
-	0x0000008f,
-	0x0000000f,
-	0xc0016900,
-	0x000001e8,
-	0x00000001,
-	0xc0016900,
+	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
+
+	0xc0076900,
 	0x00000202,
-	0x00cc0000,
+	0x00cc0000, /* CB_COLOR_CONTROL */
+	0x00000210, /* DB_SHADER_CNTL */
+	0x00010000, /* PA_CL_CLIP_CNTL */
+	0x00000244, /* PA_SU_SC_MODE_CNTL */
+	0x00000100, /* PA_CL_VTE_CNTL */
+	0x00000000, /* PA_CL_VS_OUT_CNTL */
+	0x00000000, /* PA_CL_NANINF_CNTL */
+
+	0xc0026900,
+	0x0000008e,
+	0x0000000f, /* CB_TARGET_MASK */
+	0x0000000f, /* CB_SHADER_MASK */
+
 	0xc0016900,
-	0x00000205,
-	0x00000244,
+	0x000001e8,
+	0x00000001, /* CB_SHADER_CONTROL */
+
 	0xc0016900,
-	0x00000203,
-	0x00000210,
+	0x00000185,
+	0x00000000, /* SPI_VS_OUT_ID_0 */
+
 	0xc0016900,
+	0x00000191,
+	0x00000b00, /* SPI_PS_INPUT_CNTL_0 */
+
+	0xc0056900,
 	0x000001b1,
+	0x00000000, /* SPI_VS_OUT_CONFIG */
+	0x00000001, /* SPI_THREAD_GROUPING */
+	0x00000001, /* SPI_PS_IN_CONTROL_0 */
+	0x00000000, /* SPI_PS_IN_CONTROL_1 */
+	0x00000000, /* SPI_INTERP_CONTROL_0 */
+
+	0xc0036e00, /* SET_SAMPLER */
 	0x00000000,
-	0xc0016900,
-	0x00000185,
-	0x00000000,
-	0xc0016900,
-	0x000001b3,
-	0x00000001,
-	0xc0016900,
-	0x000001b4,
+	0x00000012,
 	0x00000000,
-	0xc0016900,
-	0x00000191,
-	0x00000b00,
-	0xc0016900,
-	0x000001b5,
 	0x00000000,
 };
 
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 144c32d3713..c3ea212e0c3 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -25,6 +25,7 @@
  *          Alex Deucher
  *          Jerome Glisse
  */
+#include <linux/kernel.h>
 #include "drmP.h"
 #include "radeon.h"
 #include "r600d.h"
@@ -166,7 +167,7 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 {
 	struct r600_cs_track *track = p->track;
-	u32 bpe = 0, pitch, slice_tile_max, size, tmp, height;
+	u32 bpe = 0, pitch, slice_tile_max, size, tmp, height, pitch_align;
 	volatile u32 *ib = p->ib->ptr;
 
 	if (G_0280A0_TILE_MODE(track->cb_color_info[i])) {
@@ -180,56 +181,57 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			i, track->cb_color_info[i]);
 		return -EINVAL;
 	}
-	pitch = (G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1) << 3;
+	/* pitch is the number of 8x8 tiles per row */
+	pitch = G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1;
 	slice_tile_max = G_028060_SLICE_TILE_MAX(track->cb_color_size[i]) + 1;
-	if (!pitch) {
-		dev_warn(p->dev, "%s:%d cb pitch (%d) for %d invalid (0x%08X)\n",
-			__func__, __LINE__, pitch, i, track->cb_color_size[i]);
-		return -EINVAL;
-	}
-	height = size / (pitch * bpe);
+	height = size / (pitch * 8 * bpe);
 	if (height > 8192)
 		height = 8192;
+	if (height > 7)
+		height &= ~0x7;
 	switch (G_0280A0_ARRAY_MODE(track->cb_color_info[i])) {
 	case V_0280A0_ARRAY_LINEAR_GENERAL:
+		/* technically height & 0x7 */
+		break;
 	case V_0280A0_ARRAY_LINEAR_ALIGNED:
-		if (pitch & 0x3f) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d x %d = %d) invalid\n",
-				__func__, __LINE__, pitch, bpe, pitch * bpe);
+		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
+		if (!IS_ALIGNED(pitch, pitch_align)) {
+			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
+				 __func__, __LINE__, pitch);
 			return -EINVAL;
 		}
-		if ((pitch * bpe) & (track->group_size - 1)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
+		if (!IS_ALIGNED(height, 8)) {
+			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+				 __func__, __LINE__, height);
 			return -EINVAL;
 		}
 		break;
 	case V_0280A0_ARRAY_1D_TILED_THIN1:
-		if ((pitch * 8 * bpe * track->nsamples) & (track->group_size - 1)) {
+		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe * track->nsamples))) / 8;
+		if (!IS_ALIGNED(pitch, pitch_align)) {
 			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
+				 __func__, __LINE__, pitch);
+			return -EINVAL;
+		}
+		if (!IS_ALIGNED(height, 8)) {
+			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+				 __func__, __LINE__, height);
 			return -EINVAL;
 		}
-		height &= ~0x7;
-		if (!height)
-			height = 8;
 		break;
 	case V_0280A0_ARRAY_2D_TILED_THIN1:
-		if (pitch & ((8 * track->nbanks) - 1)) {
+		pitch_align = max((u32)track->nbanks,
+				  (u32)(((track->group_size / 8) / (bpe * track->nsamples)) * track->nbanks));
+		if (!IS_ALIGNED(pitch, pitch_align)) {
 			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
 				__func__, __LINE__, pitch);
 			return -EINVAL;
 		}
-		tmp = pitch * 8 * bpe * track->nsamples;
-		tmp = tmp / track->nbanks;
-		if (tmp & (track->group_size - 1)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
+		if (!IS_ALIGNED((height / 8), track->nbanks)) {
+			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+				 __func__, __LINE__, height);
 			return -EINVAL;
 		}
-		height &= ~((16 * track->npipes) - 1);
-		if (!height)
-			height = 16 * track->npipes;
 		break;
 	default:
 		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
@@ -238,16 +240,20 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 		return -EINVAL;
 	}
 	/* check offset */
-	tmp = height * pitch;
+	tmp = height * pitch * 8 * bpe;
 	if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
-		dev_warn(p->dev, "%s offset[%d] %d to big\n", __func__, i, track->cb_color_bo_offset[i]);
+		dev_warn(p->dev, "%s offset[%d] %d too big\n", __func__, i, track->cb_color_bo_offset[i]);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(track->cb_color_bo_offset[i], track->group_size)) {
+		dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->cb_color_bo_offset[i]);
 		return -EINVAL;
 	}
 	/* limit max tile */
-	tmp = (height * pitch) >> 6;
+	tmp = (height * pitch * 8) >> 6;
 	if (tmp < slice_tile_max)
 		slice_tile_max = tmp;
-	tmp = S_028060_PITCH_TILE_MAX((pitch >> 3) - 1) |
+	tmp = S_028060_PITCH_TILE_MAX(pitch - 1) |
 		S_028060_SLICE_TILE_MAX(slice_tile_max - 1);
 	ib[track->cb_color_size_idx[i]] = tmp;
 	return 0;
@@ -289,7 +295,7 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 	/* Check depth buffer */
 	if (G_028800_STENCIL_ENABLE(track->db_depth_control) ||
 		G_028800_Z_ENABLE(track->db_depth_control)) {
-		u32 nviews, bpe, ntiles;
+		u32 nviews, bpe, ntiles, pitch, pitch_align, height, size;
 		if (track->db_bo == NULL) {
 			dev_warn(p->dev, "z/stencil with no depth buffer\n");
 			return -EINVAL;
@@ -332,6 +338,51 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 			}
 			ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF);
 		} else {
+			size = radeon_bo_size(track->db_bo);
+			pitch = G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1;
+			height = size / (pitch * 8 * bpe);
+			height &= ~0x7;
+			if (!height)
+				height = 8;
+
+			switch (G_028010_ARRAY_MODE(track->db_depth_info)) {
+			case V_028010_ARRAY_1D_TILED_THIN1:
+				pitch_align = (max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8);
+				if (!IS_ALIGNED(pitch, pitch_align)) {
+					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+						 __func__, __LINE__, pitch);
+					return -EINVAL;
+				}
+				if (!IS_ALIGNED(height, 8)) {
+					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+						 __func__, __LINE__, height);
+					return -EINVAL;
+				}
+				break;
+			case V_028010_ARRAY_2D_TILED_THIN1:
+				pitch_align = max((u32)track->nbanks,
+						  (u32)(((track->group_size / 8) / bpe) * track->nbanks));
+				if (!IS_ALIGNED(pitch, pitch_align)) {
+					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+						 __func__, __LINE__, pitch);
+					return -EINVAL;
+				}
+				if ((height / 8) & (track->nbanks - 1)) {
+					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+						 __func__, __LINE__, height);
+					return -EINVAL;
+				}
+				break;
+			default:
+				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+					 G_028010_ARRAY_MODE(track->db_depth_info),
+					 track->db_depth_info);
+				return -EINVAL;
+			}
+			if (!IS_ALIGNED(track->db_offset, track->group_size)) {
+				dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->db_offset);
+				return -EINVAL;
+			}
 			ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1;
 			tmp = ntiles * bpe * 64 * nviews;
@@ -724,7 +775,25 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		track->db_depth_control = radeon_get_ib_value(p, idx);
 		break;
 	case R_028010_DB_DEPTH_INFO:
-		track->db_depth_info = radeon_get_ib_value(p, idx);
+		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+			r = r600_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_warn(p->dev, "bad SET_CONTEXT_REG "
+					 "0x%04X\n", reg);
+				return -EINVAL;
+			}
+			track->db_depth_info = radeon_get_ib_value(p, idx);
+			ib[idx] &= C_028010_ARRAY_MODE;
+			track->db_depth_info &= C_028010_ARRAY_MODE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= S_028010_ARRAY_MODE(V_028010_ARRAY_2D_TILED_THIN1);
+				track->db_depth_info |= S_028010_ARRAY_MODE(V_028010_ARRAY_2D_TILED_THIN1);
+			} else {
+				ib[idx] |= S_028010_ARRAY_MODE(V_028010_ARRAY_1D_TILED_THIN1);
+				track->db_depth_info |= S_028010_ARRAY_MODE(V_028010_ARRAY_1D_TILED_THIN1);
+			}
+		} else
+			track->db_depth_info = radeon_get_ib_value(p, idx);
 		break;
 	case R_028004_DB_DEPTH_VIEW:
 		track->db_depth_view = radeon_get_ib_value(p, idx);
@@ -757,8 +826,25 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 	case R_0280B4_CB_COLOR5_INFO:
 	case R_0280B8_CB_COLOR6_INFO:
 	case R_0280BC_CB_COLOR7_INFO:
-		tmp = (reg - R_0280A0_CB_COLOR0_INFO) / 4;
-		track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+		if (r600_cs_packet_next_is_pkt3_nop(p)) {
+			r = r600_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				dev_err(p->dev, "bad SET_CONTEXT_REG 0x%04X\n", reg);
+				return -EINVAL;
+			}
+			tmp = (reg - R_0280A0_CB_COLOR0_INFO) / 4;
+			track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO) {
+				ib[idx] |= S_0280A0_ARRAY_MODE(V_0280A0_ARRAY_2D_TILED_THIN1);
+				track->cb_color_info[tmp] |= S_0280A0_ARRAY_MODE(V_0280A0_ARRAY_2D_TILED_THIN1);
+			} else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+				ib[idx] |= S_0280A0_ARRAY_MODE(V_0280A0_ARRAY_1D_TILED_THIN1);
+				track->cb_color_info[tmp] |= S_0280A0_ARRAY_MODE(V_0280A0_ARRAY_1D_TILED_THIN1);
+			}
+		} else {
+			tmp = (reg - R_0280A0_CB_COLOR0_INFO) / 4;
+			track->cb_color_info[tmp] = radeon_get_ib_value(p, idx);
+		}
 		break;
 	case R_028060_CB_COLOR0_SIZE:
 	case R_028064_CB_COLOR1_SIZE:
@@ -946,8 +1032,9 @@ static inline unsigned minify(unsigned size, unsigned levels)
 }
 
 static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels,
-				unsigned w0, unsigned h0, unsigned d0, unsigned bpe,
-				unsigned *l0_size, unsigned *mipmap_size)
+			      unsigned w0, unsigned h0, unsigned d0, unsigned bpe,
+			      unsigned pitch_align,
+			      unsigned *l0_size, unsigned *mipmap_size)
 {
 	unsigned offset, i, level, face;
 	unsigned width, height, depth, rowstride, size;
@@ -960,13 +1047,13 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels
 		height = minify(h0, i);
 		depth = minify(d0, i);
 		for(face = 0; face < nfaces; face++) {
-			rowstride = ((width * bpe) + 255) & ~255;
+			rowstride = ALIGN((width * bpe), pitch_align);
 			size = height * rowstride * depth;
 			offset += size;
 			offset = (offset + 0x1f) & ~0x1f;
 		}
 	}
-	*l0_size = (((w0 * bpe) + 255) & ~255) * h0 * d0;
+	*l0_size = ALIGN((w0 * bpe), pitch_align) * h0 * d0;
 	*mipmap_size = offset;
 	if (!blevel)
 		*mipmap_size -= *l0_size;
@@ -985,16 +1072,23 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels
  * the texture and mipmap bo object are big enough to cover this resource.
  */
 static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
-						struct radeon_bo *texture,
-						struct radeon_bo *mipmap)
+					      struct radeon_bo *texture,
+					      struct radeon_bo *mipmap,
+					      u32 tiling_flags)
 {
+	struct r600_cs_track *track = p->track;
 	u32 nfaces, nlevels, blevel, w0, h0, d0, bpe = 0;
-	u32 word0, word1, l0_size, mipmap_size;
+	u32 word0, word1, l0_size, mipmap_size, pitch, pitch_align;
 
 	/* on legacy kernel we don't perform advanced check */
 	if (p->rdev == NULL)
 		return 0;
+
 	word0 = radeon_get_ib_value(p, idx + 0);
+	if (tiling_flags & RADEON_TILING_MACRO)
+		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+	else if (tiling_flags & RADEON_TILING_MICRO)
+		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
 	word1 = radeon_get_ib_value(p, idx + 1);
 	w0 = G_038000_TEX_WIDTH(word0) + 1;
 	h0 = G_038004_TEX_HEIGHT(word1) + 1;
@@ -1021,11 +1115,55 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 i
 			 __func__, __LINE__, G_038004_DATA_FORMAT(word1));
 		return -EINVAL;
 	}
+
+	pitch = G_038000_PITCH(word0) + 1;
+	switch (G_038000_TILE_MODE(word0)) {
+	case V_038000_ARRAY_LINEAR_GENERAL:
+		pitch_align = 1;
+		/* XXX check height align */
+		break;
+	case V_038000_ARRAY_LINEAR_ALIGNED:
+		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
+		if (!IS_ALIGNED(pitch, pitch_align)) {
+			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+				 __func__, __LINE__, pitch);
+			return -EINVAL;
+		}
+		/* XXX check height align */
+		break;
+	case V_038000_ARRAY_1D_TILED_THIN1:
+		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8;
+		if (!IS_ALIGNED(pitch, pitch_align)) {
+			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+				 __func__, __LINE__, pitch);
+			return -EINVAL;
+		}
+		/* XXX check height align */
+		break;
+	case V_038000_ARRAY_2D_TILED_THIN1:
+		pitch_align = max((u32)track->nbanks,
+				  (u32)(((track->group_size / 8) / bpe) * track->nbanks));
+		if (!IS_ALIGNED(pitch, pitch_align)) {
+			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+				__func__, __LINE__, pitch);
+			return -EINVAL;
+		}
+		/* XXX check height align */
+		break;
+	default:
+		dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+			 G_038000_TILE_MODE(word0), word0);
+		return -EINVAL;
+	}
+	/* XXX check offset align */
+
 	word0 = radeon_get_ib_value(p, idx + 4);
 	word1 = radeon_get_ib_value(p, idx + 5);
 	blevel = G_038010_BASE_LEVEL(word0);
 	nlevels = G_038014_LAST_LEVEL(word1);
-	r600_texture_size(nfaces, blevel, nlevels, w0, h0, d0, bpe, &l0_size, &mipmap_size);
+	r600_texture_size(nfaces, blevel, nlevels, w0, h0, d0, bpe,
+			  (pitch_align * bpe),
+			  &l0_size, &mipmap_size);
 	/* using get ib will give us the offset into the texture bo */
 	word0 = radeon_get_ib_value(p, idx + 2);
 	if ((l0_size + word0) > radeon_bo_size(texture)) {
@@ -1239,6 +1377,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 					return -EINVAL;
 				}
 				ib[idx+1+(i*7)+2] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+				if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
+				else if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+					ib[idx+1+(i*7)+0] |= S_038000_TILE_MODE(V_038000_ARRAY_1D_TILED_THIN1);
 				texture = reloc->robj;
 				/* tex mip base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
@@ -1249,7 +1391,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 				ib[idx+1+(i*7)+3] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				mipmap = reloc->robj;
 				r = r600_check_texture_resource(p,  idx+(i*7)+1,
-						texture, mipmap);
+								texture, mipmap, reloc->lobj.tiling_flags);
 				if (r)
 					return r;
 				break;
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 26b4bc9d89a..e6a58ed48dc 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -435,7 +435,8 @@ static int r600_hdmi_find_free_block(struct drm_device *dev)
 		}
 	}
 
-	if (rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690) {
+	if (rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690 ||
+	    rdev->family == CHIP_RS740) {
 		return free_blocks[0] ? R600_HDMI_BLOCK1 : 0;
 	} else if (rdev->family >= CHIP_R600) {
 		if (free_blocks[0])
@@ -466,7 +467,8 @@ static void r600_hdmi_assign_block(struct drm_encoder *encoder)
 		if (ASIC_IS_DCE32(rdev))
 			radeon_encoder->hdmi_config_offset = dig->dig_encoder ?
 				R600_HDMI_CONFIG2 : R600_HDMI_CONFIG1;
-	} else if (rdev->family >= CHIP_R600) {
+	} else if (rdev->family >= CHIP_R600 || rdev->family == CHIP_RS600 ||
+		   rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
 		radeon_encoder->hdmi_offset = r600_hdmi_find_free_block(dev);
 	}
 }
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 59c1f8793e6..858a1920c0d 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -239,12 +239,18 @@
 #define	GRBM_SOFT_RESET					0x8020
 #define		SOFT_RESET_CP					(1<<0)
 
+#define	CG_THERMAL_STATUS				0x7F4
+#define		ASIC_T(x)			        ((x) << 0)
+#define		ASIC_T_MASK			        0x1FF
+#define		ASIC_T_SHIFT			        0
+
 #define	HDP_HOST_PATH_CNTL				0x2C00
 #define	HDP_NONSURFACE_BASE				0x2C04
 #define	HDP_NONSURFACE_INFO				0x2C08
 #define	HDP_NONSURFACE_SIZE				0x2C0C
 #define HDP_REG_COHERENCY_FLUSH_CNTL			0x54A0
 #define	HDP_TILING_CONFIG				0x2F3C
+#define HDP_DEBUG1                                      0x2F34
 
 #define MC_VM_AGP_TOP					0x2184
 #define MC_VM_AGP_BOT					0x2188
@@ -1154,6 +1160,10 @@
 #define   S_038000_TILE_MODE(x)                        (((x) & 0xF) << 3)
 #define   G_038000_TILE_MODE(x)                        (((x) >> 3) & 0xF)
 #define   C_038000_TILE_MODE                           0xFFFFFF87
+#define     V_038000_ARRAY_LINEAR_GENERAL              0x00000000
+#define     V_038000_ARRAY_LINEAR_ALIGNED              0x00000001
+#define     V_038000_ARRAY_1D_TILED_THIN1              0x00000002
+#define     V_038000_ARRAY_2D_TILED_THIN1              0x00000004
 #define   S_038000_TILE_TYPE(x)                        (((x) & 0x1) << 7)
 #define   G_038000_TILE_TYPE(x)                        (((x) >> 7) & 0x1)
 #define   C_038000_TILE_TYPE                           0xFFFFFF7F
@@ -1357,6 +1367,8 @@
 #define   S_028010_ARRAY_MODE(x)                       (((x) & 0xF) << 15)
 #define   G_028010_ARRAY_MODE(x)                       (((x) >> 15) & 0xF)
 #define   C_028010_ARRAY_MODE                          0xFFF87FFF
+#define     V_028010_ARRAY_1D_TILED_THIN1              0x00000002
+#define     V_028010_ARRAY_2D_TILED_THIN1              0x00000004
 #define   S_028010_TILE_SURFACE_ENABLE(x)              (((x) & 0x1) << 25)
 #define   G_028010_TILE_SURFACE_ENABLE(x)              (((x) >> 25) & 0x1)
 #define   C_028010_TILE_SURFACE_ENABLE                 0xFDFFFFFF
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 2f94dc66c18..3cd1c470b77 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -178,6 +178,9 @@ void radeon_combios_get_power_modes(struct radeon_device *rdev);
 void radeon_atombios_get_power_modes(struct radeon_device *rdev);
 void radeon_atom_set_voltage(struct radeon_device *rdev, u16 level);
 void rs690_pm_info(struct radeon_device *rdev);
+extern u32 rv6xx_get_temp(struct radeon_device *rdev);
+extern u32 rv770_get_temp(struct radeon_device *rdev);
+extern u32 evergreen_get_temp(struct radeon_device *rdev);
 
 /*
  * Fences.
@@ -232,7 +235,7 @@ struct radeon_surface_reg {
  */
 struct radeon_mman {
 	struct ttm_bo_global_ref        bo_global_ref;
-	struct ttm_global_reference	mem_global_ref;
+	struct drm_global_reference	mem_global_ref;
 	struct ttm_bo_device		bdev;
 	bool				mem_global_referenced;
 	bool				initialized;
@@ -671,6 +674,13 @@ struct radeon_pm_profile {
 	int dpms_on_cm_idx;
 };
 
+enum radeon_int_thermal_type {
+	THERMAL_TYPE_NONE,
+	THERMAL_TYPE_RV6XX,
+	THERMAL_TYPE_RV770,
+	THERMAL_TYPE_EVERGREEN,
+};
+
 struct radeon_voltage {
 	enum radeon_voltage_type type;
 	/* gpio voltage */
@@ -766,6 +776,9 @@ struct radeon_pm {
 	enum radeon_pm_profile_type profile;
 	int                     profile_index;
 	struct radeon_pm_profile profiles[PM_PROFILE_MAX];
+	/* internal thermal controller on rv6xx+ */
+	enum radeon_int_thermal_type int_thermal_type;
+	struct device	        *int_hwmon_dev;
 };
 
 
@@ -902,6 +915,7 @@ struct r600_asic {
 	unsigned		tiling_nbanks;
 	unsigned		tiling_npipes;
 	unsigned		tiling_group_size;
+	unsigned		tile_config;
 	struct r100_gpu_lockup	lockup;
 };
 
@@ -926,6 +940,7 @@ struct rv770_asic {
 	unsigned		tiling_nbanks;
 	unsigned		tiling_npipes;
 	unsigned		tiling_group_size;
+	unsigned		tile_config;
 	struct r100_gpu_lockup	lockup;
 };
 
@@ -951,6 +966,7 @@ struct evergreen_asic {
 	unsigned tiling_nbanks;
 	unsigned tiling_npipes;
 	unsigned tiling_group_size;
+	unsigned tile_config;
 };
 
 union radeon_asic_config {
@@ -1033,6 +1049,9 @@ struct radeon_device {
 	uint32_t                        pcie_reg_mask;
 	radeon_rreg_t			pciep_rreg;
 	radeon_wreg_t			pciep_wreg;
+	/* io port */
+	void __iomem                    *rio_mem;
+	resource_size_t			rio_mem_size;
 	struct radeon_clock             clock;
 	struct radeon_mc		mc;
 	struct radeon_gart		gart;
@@ -1069,6 +1088,7 @@ struct radeon_device {
 	struct mutex vram_mutex;
 
 	/* audio stuff */
+	bool			audio_enabled;
 	struct timer_list	audio_timer;
 	int			audio_channels;
 	int			audio_rate;
@@ -1078,6 +1098,8 @@ struct radeon_device {
 
 	bool powered_down;
 	struct notifier_block acpi_nb;
+	/* only one userspace can use Hyperz features at a time */
+	struct drm_file *hyperz_filp;
 };
 
 int radeon_device_init(struct radeon_device *rdev,
@@ -1114,6 +1136,26 @@ static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32
 	}
 }
 
+static inline u32 r100_io_rreg(struct radeon_device *rdev, u32 reg)
+{
+	if (reg < rdev->rio_mem_size)
+		return ioread32(rdev->rio_mem + reg);
+	else {
+		iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
+		return ioread32(rdev->rio_mem + RADEON_MM_DATA);
+	}
+}
+
+static inline void r100_io_wreg(struct radeon_device *rdev, u32 reg, u32 v)
+{
+	if (reg < rdev->rio_mem_size)
+		iowrite32(v, rdev->rio_mem + reg);
+	else {
+		iowrite32(reg, rdev->rio_mem + RADEON_MM_INDEX);
+		iowrite32(v, rdev->rio_mem + RADEON_MM_DATA);
+	}
+}
+
 /*
  * Cast helper
  */
@@ -1152,6 +1194,8 @@ static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32
 		WREG32_PLL(reg, tmp_);				\
 	} while (0)
 #define DREG32_SYS(sqf, rdev, reg) seq_printf((sqf), #reg " : 0x%08X\n", r100_mm_rreg((rdev), (reg)))
+#define RREG32_IO(reg) r100_io_rreg(rdev, (reg))
+#define WREG32_IO(reg, v) r100_io_wreg(rdev, (reg), (v))
 
 /*
  * Indirect registers accessor
@@ -1415,6 +1459,13 @@ extern void r700_cp_fini(struct radeon_device *rdev);
 extern void evergreen_disable_interrupt_state(struct radeon_device *rdev);
 extern int evergreen_irq_set(struct radeon_device *rdev);
 
+/* radeon_acpi.c */ 
+#if defined(CONFIG_ACPI) 
+extern int radeon_acpi_init(struct radeon_device *rdev); 
+#else 
+static inline int radeon_acpi_init(struct radeon_device *rdev) { return 0; } 
+#endif 
+
 /* evergreen */
 struct evergreen_mc_save {
 	u32 vga_control[6];
diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c
new file mode 100644
index 00000000000..3f6636bb2d7
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_acpi.c
@@ -0,0 +1,67 @@
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/slab.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_sarea.h"
+#include "drm_crtc_helper.h"
+#include "radeon.h"
+
+#include <linux/vga_switcheroo.h>
+
+/* Call the ATIF method
+ *
+ * Note: currently we discard the output
+ */
+static int radeon_atif_call(acpi_handle handle)
+{
+	acpi_status status;
+	union acpi_object atif_arg_elements[2];
+	struct acpi_object_list atif_arg;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL};
+
+	atif_arg.count = 2;
+	atif_arg.pointer = &atif_arg_elements[0];
+
+	atif_arg_elements[0].type = ACPI_TYPE_INTEGER;
+	atif_arg_elements[0].integer.value = 0;
+	atif_arg_elements[1].type = ACPI_TYPE_INTEGER;
+	atif_arg_elements[1].integer.value = 0;
+
+	status = acpi_evaluate_object(handle, "ATIF", &atif_arg, &buffer);
+
+	/* Fail only if calling the method fails and ATIF is supported */
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		printk(KERN_DEBUG "failed to evaluate ATIF got %s\n", acpi_format_exception(status));
+		kfree(buffer.pointer);
+		return 1;
+	}
+
+	kfree(buffer.pointer);
+	return 0;
+}
+
+/* Call all ACPI methods here */
+int radeon_acpi_init(struct radeon_device *rdev)
+{
+	acpi_handle handle;
+	int ret;
+
+	/* No need to proceed if we're sure that ATIF is not supported */
+	if (!ASIC_IS_AVIVO(rdev) || !rdev->bios)
+		return 0;
+
+	/* Get the device handle */
+	handle = DEVICE_ACPI_HANDLE(&rdev->pdev->dev);
+
+	/* Call the ATIF method */
+	ret = radeon_atif_call(handle);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index c0bbaa64157..a5aff755f0d 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -113,6 +113,7 @@ void r100_wb_fini(struct radeon_device *rdev);
 int r100_wb_init(struct radeon_device *rdev);
 int r100_cp_reset(struct radeon_device *rdev);
 void r100_vga_render_disable(struct radeon_device *rdev);
+void r100_restore_sanity(struct radeon_device *rdev);
 int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
 					 struct radeon_cs_packet *pkt,
 					 struct radeon_bo *robj);
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 10673ae59cf..3bc2bcdf530 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -723,7 +723,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 		}
 
 		if (i == ATOM_DEVICE_CV_INDEX) {
-			DRM_DEBUG("Skipping Component Video\n");
+			DRM_DEBUG_KMS("Skipping Component Video\n");
 			continue;
 		}
 
@@ -1032,21 +1032,18 @@ bool radeon_atombios_sideport_present(struct radeon_device *rdev)
 	u8 frev, crev;
 	u16 data_offset;
 
+	/* sideport is AMD only */
+	if (rdev->family == CHIP_RS600)
+		return false;
+
 	if (atom_parse_data_header(mode_info->atom_context, index, NULL,
 				   &frev, &crev, &data_offset)) {
 		igp_info = (union igp_info *)(mode_info->atom_context->bios +
 				      data_offset);
 		switch (crev) {
 		case 1:
-			/* AMD IGPS */
-			if ((rdev->family == CHIP_RS690) ||
-			    (rdev->family == CHIP_RS740)) {
-				if (igp_info->info.ulBootUpMemoryClock)
-					return true;
-			} else {
-				if (igp_info->info.ucMemoryType & 0xf0)
-					return true;
-			}
+			if (igp_info->info.ulBootUpMemoryClock)
+				return true;
 			break;
 		case 2:
 			if (igp_info->info_2.ucMemoryType & 0x0f)
@@ -1095,7 +1092,7 @@ bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder,
 			    (tmds_info->asMiscInfo[i].
 			     ucPLL_VoltageSwing & 0xf) << 16;
 
-			DRM_DEBUG("TMDS PLL From ATOMBIOS %u %x\n",
+			DRM_DEBUG_KMS("TMDS PLL From ATOMBIOS %u %x\n",
 				  tmds->tmds_pll[i].freq,
 				  tmds->tmds_pll[i].value);
 
@@ -1789,14 +1786,22 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
 			}
 
 			/* add the i2c bus for thermal/fan chip */
-			/* no support for internal controller yet */
 			if (controller->ucType > 0) {
-				if ((controller->ucType == ATOM_PP_THERMALCONTROLLER_RV6xx) ||
-				    (controller->ucType == ATOM_PP_THERMALCONTROLLER_RV770) ||
-				    (controller->ucType == ATOM_PP_THERMALCONTROLLER_EVERGREEN)) {
+				if (controller->ucType == ATOM_PP_THERMALCONTROLLER_RV6xx) {
+					DRM_INFO("Internal thermal controller %s fan control\n",
+						 (controller->ucFanParameters &
+						  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+					rdev->pm.int_thermal_type = THERMAL_TYPE_RV6XX;
+				} else if (controller->ucType == ATOM_PP_THERMALCONTROLLER_RV770) {
+					DRM_INFO("Internal thermal controller %s fan control\n",
+						 (controller->ucFanParameters &
+						  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+					rdev->pm.int_thermal_type = THERMAL_TYPE_RV770;
+				} else if (controller->ucType == ATOM_PP_THERMALCONTROLLER_EVERGREEN) {
 					DRM_INFO("Internal thermal controller %s fan control\n",
 						 (controller->ucFanParameters &
 						  ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+					rdev->pm.int_thermal_type = THERMAL_TYPE_EVERGREEN;
 				} else if ((controller->ucType ==
 					    ATOM_PP_THERMALCONTROLLER_EXTERNAL_GPIO) ||
 					   (controller->ucType ==
@@ -2179,11 +2184,11 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("TV1 connected\n");
+			DRM_DEBUG_KMS("TV1 connected\n");
 			bios_3_scratch |= ATOM_S3_TV1_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_TV1;
 		} else {
-			DRM_DEBUG("TV1 disconnected\n");
+			DRM_DEBUG_KMS("TV1 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_TV1_MASK;
 			bios_3_scratch &= ~ATOM_S3_TV1_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_TV1;
@@ -2192,11 +2197,11 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_CV_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("CV connected\n");
+			DRM_DEBUG_KMS("CV connected\n");
 			bios_3_scratch |= ATOM_S3_CV_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_CV;
 		} else {
-			DRM_DEBUG("CV disconnected\n");
+			DRM_DEBUG_KMS("CV disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_CV_MASK;
 			bios_3_scratch &= ~ATOM_S3_CV_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CV;
@@ -2205,12 +2210,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_LCD1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("LCD1 connected\n");
+			DRM_DEBUG_KMS("LCD1 connected\n");
 			bios_0_scratch |= ATOM_S0_LCD1;
 			bios_3_scratch |= ATOM_S3_LCD1_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_LCD1;
 		} else {
-			DRM_DEBUG("LCD1 disconnected\n");
+			DRM_DEBUG_KMS("LCD1 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_LCD1;
 			bios_3_scratch &= ~ATOM_S3_LCD1_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_LCD1;
@@ -2219,12 +2224,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("CRT1 connected\n");
+			DRM_DEBUG_KMS("CRT1 connected\n");
 			bios_0_scratch |= ATOM_S0_CRT1_COLOR;
 			bios_3_scratch |= ATOM_S3_CRT1_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_CRT1;
 		} else {
-			DRM_DEBUG("CRT1 disconnected\n");
+			DRM_DEBUG_KMS("CRT1 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_CRT1_MASK;
 			bios_3_scratch &= ~ATOM_S3_CRT1_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CRT1;
@@ -2233,12 +2238,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("CRT2 connected\n");
+			DRM_DEBUG_KMS("CRT2 connected\n");
 			bios_0_scratch |= ATOM_S0_CRT2_COLOR;
 			bios_3_scratch |= ATOM_S3_CRT2_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_CRT2;
 		} else {
-			DRM_DEBUG("CRT2 disconnected\n");
+			DRM_DEBUG_KMS("CRT2 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_CRT2_MASK;
 			bios_3_scratch &= ~ATOM_S3_CRT2_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_CRT2;
@@ -2247,12 +2252,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP1 connected\n");
+			DRM_DEBUG_KMS("DFP1 connected\n");
 			bios_0_scratch |= ATOM_S0_DFP1;
 			bios_3_scratch |= ATOM_S3_DFP1_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP1;
 		} else {
-			DRM_DEBUG("DFP1 disconnected\n");
+			DRM_DEBUG_KMS("DFP1 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_DFP1;
 			bios_3_scratch &= ~ATOM_S3_DFP1_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP1;
@@ -2261,12 +2266,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP2_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP2 connected\n");
+			DRM_DEBUG_KMS("DFP2 connected\n");
 			bios_0_scratch |= ATOM_S0_DFP2;
 			bios_3_scratch |= ATOM_S3_DFP2_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP2;
 		} else {
-			DRM_DEBUG("DFP2 disconnected\n");
+			DRM_DEBUG_KMS("DFP2 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_DFP2;
 			bios_3_scratch &= ~ATOM_S3_DFP2_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP2;
@@ -2275,12 +2280,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP3_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP3_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP3 connected\n");
+			DRM_DEBUG_KMS("DFP3 connected\n");
 			bios_0_scratch |= ATOM_S0_DFP3;
 			bios_3_scratch |= ATOM_S3_DFP3_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP3;
 		} else {
-			DRM_DEBUG("DFP3 disconnected\n");
+			DRM_DEBUG_KMS("DFP3 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_DFP3;
 			bios_3_scratch &= ~ATOM_S3_DFP3_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP3;
@@ -2289,12 +2294,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP4_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP4_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP4 connected\n");
+			DRM_DEBUG_KMS("DFP4 connected\n");
 			bios_0_scratch |= ATOM_S0_DFP4;
 			bios_3_scratch |= ATOM_S3_DFP4_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP4;
 		} else {
-			DRM_DEBUG("DFP4 disconnected\n");
+			DRM_DEBUG_KMS("DFP4 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_DFP4;
 			bios_3_scratch &= ~ATOM_S3_DFP4_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP4;
@@ -2303,12 +2308,12 @@ radeon_atombios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP5_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP5_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP5 connected\n");
+			DRM_DEBUG_KMS("DFP5 connected\n");
 			bios_0_scratch |= ATOM_S0_DFP5;
 			bios_3_scratch |= ATOM_S3_DFP5_ACTIVE;
 			bios_6_scratch |= ATOM_S6_ACC_REQ_DFP5;
 		} else {
-			DRM_DEBUG("DFP5 disconnected\n");
+			DRM_DEBUG_KMS("DFP5 disconnected\n");
 			bios_0_scratch &= ~ATOM_S0_DFP5;
 			bios_3_scratch &= ~ATOM_S3_DFP5_ACTIVE;
 			bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 2c921373999..654787ec43f 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -53,7 +53,7 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev)
 			return false;
 
 	rdev->bios = NULL;
-	vram_base = drm_get_resource_start(rdev->ddev, 0);
+	vram_base = pci_resource_start(rdev->pdev, 0);
 	bios = ioremap(vram_base, size);
 	if (!bios) {
 		return false;
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 2417d7b06fd..5e1474cde4b 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -693,6 +693,10 @@ bool radeon_combios_sideport_present(struct radeon_device *rdev)
 	struct drm_device *dev = rdev->ddev;
 	u16 igp_info;
 
+	/* sideport is AMD only */
+	if (rdev->family == CHIP_RS400)
+		return false;
+
 	igp_info = combios_get_table_offset(dev, COMBIOS_INTEGRATED_SYSTEM_INFO_TABLE);
 
 	if (igp_info) {
@@ -1205,7 +1209,7 @@ bool radeon_legacy_get_tmds_info_from_combios(struct radeon_encoder *encoder,
 				    RBIOS32(tmds_info + i * 10 + 0x08);
 				tmds->tmds_pll[i].freq =
 				    RBIOS16(tmds_info + i * 10 + 0x10);
-				DRM_DEBUG("TMDS PLL From COMBIOS %u %x\n",
+				DRM_DEBUG_KMS("TMDS PLL From COMBIOS %u %x\n",
 					  tmds->tmds_pll[i].freq,
 					  tmds->tmds_pll[i].value);
 			}
@@ -1223,7 +1227,7 @@ bool radeon_legacy_get_tmds_info_from_combios(struct radeon_encoder *encoder,
 					stride += 10;
 				else
 					stride += 6;
-				DRM_DEBUG("TMDS PLL From COMBIOS %u %x\n",
+				DRM_DEBUG_KMS("TMDS PLL From COMBIOS %u %x\n",
 					  tmds->tmds_pll[i].freq,
 					  tmds->tmds_pll[i].value);
 			}
@@ -2208,7 +2212,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 		uint16_t tmds_info =
 		    combios_get_table_offset(dev, COMBIOS_DFP_INFO_TABLE);
 		if (tmds_info) {
-			DRM_DEBUG("Found DFP table, assuming DVI connector\n");
+			DRM_DEBUG_KMS("Found DFP table, assuming DVI connector\n");
 
 			radeon_add_legacy_encoder(dev,
 						  radeon_get_encoder_id(dev,
@@ -2234,7 +2238,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 		} else {
 			uint16_t crt_info =
 				combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
-			DRM_DEBUG("Found CRT table, assuming VGA connector\n");
+			DRM_DEBUG_KMS("Found CRT table, assuming VGA connector\n");
 			if (crt_info) {
 				radeon_add_legacy_encoder(dev,
 							  radeon_get_encoder_id(dev,
@@ -2251,7 +2255,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 							    CONNECTOR_OBJECT_ID_VGA,
 							    &hpd);
 			} else {
-				DRM_DEBUG("No connector info found\n");
+				DRM_DEBUG_KMS("No connector info found\n");
 				return false;
 			}
 		}
@@ -2340,7 +2344,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
 					ddc_i2c.valid = false;
 					break;
 				}
-				DRM_DEBUG("LCD DDC Info Table found!\n");
+				DRM_DEBUG_KMS("LCD DDC Info Table found!\n");
 			} else
 				ddc_i2c.valid = false;
 
@@ -2941,9 +2945,8 @@ static void combios_write_ram_size(struct drm_device *dev)
 		if (rev < 3) {
 			mem_cntl = RBIOS32(offset + 1);
 			mem_size = RBIOS16(offset + 5);
-			if (((rdev->flags & RADEON_FAMILY_MASK) < CHIP_R200) &&
-			    ((dev->pdev->device != 0x515e)
-			     && (dev->pdev->device != 0x5969)))
+			if ((rdev->family < CHIP_R200) &&
+			    !ASIC_IS_RN50(rdev))
 				WREG32(RADEON_MEM_CNTL, mem_cntl);
 		}
 	}
@@ -2954,10 +2957,8 @@ static void combios_write_ram_size(struct drm_device *dev)
 		if (offset) {
 			rev = RBIOS8(offset - 1);
 			if (rev < 1) {
-				if (((rdev->flags & RADEON_FAMILY_MASK) <
-				     CHIP_R200)
-				    && ((dev->pdev->device != 0x515e)
-					&& (dev->pdev->device != 0x5969))) {
+				if ((rdev->family < CHIP_R200)
+				    && !ASIC_IS_RN50(rdev)) {
 					int ram = 0;
 					int mem_addr_mapping = 0;
 
@@ -3121,14 +3122,14 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_TV1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("TV1 connected\n");
+			DRM_DEBUG_KMS("TV1 connected\n");
 			/* fix me */
 			bios_4_scratch |= RADEON_TV1_ATTACHED_SVIDEO;
 			/*save->bios_4_scratch |= RADEON_TV1_ATTACHED_COMP; */
 			bios_5_scratch |= RADEON_TV1_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_TV1;
 		} else {
-			DRM_DEBUG("TV1 disconnected\n");
+			DRM_DEBUG_KMS("TV1 disconnected\n");
 			bios_4_scratch &= ~RADEON_TV1_ATTACHED_MASK;
 			bios_5_scratch &= ~RADEON_TV1_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_TV1;
@@ -3137,12 +3138,12 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_LCD1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_LCD1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("LCD1 connected\n");
+			DRM_DEBUG_KMS("LCD1 connected\n");
 			bios_4_scratch |= RADEON_LCD1_ATTACHED;
 			bios_5_scratch |= RADEON_LCD1_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_LCD1;
 		} else {
-			DRM_DEBUG("LCD1 disconnected\n");
+			DRM_DEBUG_KMS("LCD1 disconnected\n");
 			bios_4_scratch &= ~RADEON_LCD1_ATTACHED;
 			bios_5_scratch &= ~RADEON_LCD1_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_LCD1;
@@ -3151,12 +3152,12 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_CRT1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("CRT1 connected\n");
+			DRM_DEBUG_KMS("CRT1 connected\n");
 			bios_4_scratch |= RADEON_CRT1_ATTACHED_COLOR;
 			bios_5_scratch |= RADEON_CRT1_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_CRT1;
 		} else {
-			DRM_DEBUG("CRT1 disconnected\n");
+			DRM_DEBUG_KMS("CRT1 disconnected\n");
 			bios_4_scratch &= ~RADEON_CRT1_ATTACHED_MASK;
 			bios_5_scratch &= ~RADEON_CRT1_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_CRT1;
@@ -3165,12 +3166,12 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_CRT2_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("CRT2 connected\n");
+			DRM_DEBUG_KMS("CRT2 connected\n");
 			bios_4_scratch |= RADEON_CRT2_ATTACHED_COLOR;
 			bios_5_scratch |= RADEON_CRT2_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_CRT2;
 		} else {
-			DRM_DEBUG("CRT2 disconnected\n");
+			DRM_DEBUG_KMS("CRT2 disconnected\n");
 			bios_4_scratch &= ~RADEON_CRT2_ATTACHED_MASK;
 			bios_5_scratch &= ~RADEON_CRT2_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_CRT2;
@@ -3179,12 +3180,12 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP1_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP1_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP1 connected\n");
+			DRM_DEBUG_KMS("DFP1 connected\n");
 			bios_4_scratch |= RADEON_DFP1_ATTACHED;
 			bios_5_scratch |= RADEON_DFP1_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_DFP1;
 		} else {
-			DRM_DEBUG("DFP1 disconnected\n");
+			DRM_DEBUG_KMS("DFP1 disconnected\n");
 			bios_4_scratch &= ~RADEON_DFP1_ATTACHED;
 			bios_5_scratch &= ~RADEON_DFP1_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_DFP1;
@@ -3193,12 +3194,12 @@ radeon_combios_connected_scratch_regs(struct drm_connector *connector,
 	if ((radeon_encoder->devices & ATOM_DEVICE_DFP2_SUPPORT) &&
 	    (radeon_connector->devices & ATOM_DEVICE_DFP2_SUPPORT)) {
 		if (connected) {
-			DRM_DEBUG("DFP2 connected\n");
+			DRM_DEBUG_KMS("DFP2 connected\n");
 			bios_4_scratch |= RADEON_DFP2_ATTACHED;
 			bios_5_scratch |= RADEON_DFP2_ON;
 			bios_5_scratch |= RADEON_ACC_REQ_DFP2;
 		} else {
-			DRM_DEBUG("DFP2 disconnected\n");
+			DRM_DEBUG_KMS("DFP2 disconnected\n");
 			bios_4_scratch &= ~RADEON_DFP2_ATTACHED;
 			bios_5_scratch &= ~RADEON_DFP2_ON;
 			bios_5_scratch &= ~RADEON_ACC_REQ_DFP2;
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index adccbc2c202..2395c8600cf 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -214,7 +214,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
 		drm_mode_set_name(mode);
 
-		DRM_DEBUG("Adding native panel mode %s\n", mode->name);
+		DRM_DEBUG_KMS("Adding native panel mode %s\n", mode->name);
 	} else if (native_mode->hdisplay != 0 &&
 		   native_mode->vdisplay != 0) {
 		/* mac laptops without an edid */
@@ -226,7 +226,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode
 		 */
 		mode = drm_cvt_mode(dev, native_mode->hdisplay, native_mode->vdisplay, 60, true, false, false);
 		mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
-		DRM_DEBUG("Adding cvt approximation of native panel mode %s\n", mode->name);
+		DRM_DEBUG_KMS("Adding cvt approximation of native panel mode %s\n", mode->name);
 	}
 	return mode;
 }
@@ -312,6 +312,20 @@ int radeon_connector_set_property(struct drm_connector *connector, struct drm_pr
 		}
 	}
 
+	if (property == rdev->mode_info.underscan_property) {
+		/* need to find digital encoder on connector */
+		encoder = radeon_find_encoder(connector, DRM_MODE_ENCODER_TMDS);
+		if (!encoder)
+			return 0;
+
+		radeon_encoder = to_radeon_encoder(encoder);
+
+		if (radeon_encoder->underscan_type != val) {
+			radeon_encoder->underscan_type = val;
+			radeon_property_change_mode(&radeon_encoder->base);
+		}
+	}
+
 	if (property == rdev->mode_info.tv_std_property) {
 		encoder = radeon_find_encoder(connector, DRM_MODE_ENCODER_TVDAC);
 		if (!encoder) {
@@ -522,7 +536,7 @@ static int radeon_lvds_set_property(struct drm_connector *connector,
 	struct radeon_encoder *radeon_encoder;
 	enum radeon_rmx_type rmx_type;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 	if (property != dev->mode_config.scaling_mode_property)
 		return 0;
 
@@ -1082,6 +1096,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
+		/* no HPD on analog connectors */
+		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
@@ -1096,6 +1112,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
+		/* no HPD on analog connectors */
+		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		break;
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
@@ -1116,6 +1134,10 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		if (ASIC_IS_AVIVO(rdev))
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.underscan_property,
+						      UNDERSCAN_AUTO);
 		if (connector_type == DRM_MODE_CONNECTOR_DVII) {
 			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
@@ -1141,6 +1163,10 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		if (ASIC_IS_AVIVO(rdev))
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.underscan_property,
+						      UNDERSCAN_AUTO);
 		subpixel_order = SubPixelHorizontalRGB;
 		break;
 	case DRM_MODE_CONNECTOR_DisplayPort:
@@ -1172,6 +1198,10 @@ radeon_add_atom_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		if (ASIC_IS_AVIVO(rdev))
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.underscan_property,
+						      UNDERSCAN_AUTO);
 		break;
 	case DRM_MODE_CONNECTOR_SVIDEO:
 	case DRM_MODE_CONNECTOR_Composite:
@@ -1186,6 +1216,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.tv_std_property,
 						      radeon_atombios_get_tv_info(rdev));
+			/* no HPD on analog connectors */
+			radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		}
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
@@ -1209,7 +1241,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 		break;
 	}
 
-	if (hpd->hpd == RADEON_HPD_NONE) {
+	if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) {
 		if (i2c_bus->valid)
 			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 	} else
@@ -1276,6 +1308,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
+		/* no HPD on analog connectors */
+		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
@@ -1290,6 +1324,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
+		/* no HPD on analog connectors */
+		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		break;
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
@@ -1328,6 +1364,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.tv_std_property,
 						      radeon_combios_get_tv_info(rdev));
+			/* no HPD on analog connectors */
+			radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		}
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
@@ -1345,7 +1383,7 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		break;
 	}
 
-	if (hpd->hpd == RADEON_HPD_NONE) {
+	if (radeon_connector->hpd.hpd == RADEON_HPD_NONE) {
 		if (i2c_bus->valid)
 			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 	} else
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 2f042a3c0e6..eb6b9eed734 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -2120,8 +2120,8 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags)
 	else
 		dev_priv->flags |= RADEON_IS_PCI;
 
-	ret = drm_addmap(dev, drm_get_resource_start(dev, 2),
-			 drm_get_resource_len(dev, 2), _DRM_REGISTERS,
+	ret = drm_addmap(dev, pci_resource_start(dev->pdev, 2),
+			 pci_resource_len(dev->pdev, 2), _DRM_REGISTERS,
 			 _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio);
 	if (ret != 0)
 		return ret;
@@ -2194,9 +2194,9 @@ int radeon_driver_firstopen(struct drm_device *dev)
 
 	dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE;
 
-	dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0);
+	dev_priv->fb_aper_offset = pci_resource_start(dev->pdev, 0);
 	ret = drm_addmap(dev, dev_priv->fb_aper_offset,
-			 drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER,
+			 pci_resource_len(dev->pdev, 0), _DRM_FRAME_BUFFER,
 			 _DRM_WRITE_COMBINING, &map);
 	if (ret != 0)
 		return ret;
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index dd279da9054..a64811a9451 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -415,6 +415,22 @@ static uint32_t cail_reg_read(struct card_info *info, uint32_t reg)
 	return r;
 }
 
+static void cail_ioreg_write(struct card_info *info, uint32_t reg, uint32_t val)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+
+	WREG32_IO(reg*4, val);
+}
+
+static uint32_t cail_ioreg_read(struct card_info *info, uint32_t reg)
+{
+	struct radeon_device *rdev = info->dev->dev_private;
+	uint32_t r;
+
+	r = RREG32_IO(reg*4);
+	return r;
+}
+
 int radeon_atombios_init(struct radeon_device *rdev)
 {
 	struct card_info *atom_card_info =
@@ -427,6 +443,15 @@ int radeon_atombios_init(struct radeon_device *rdev)
 	atom_card_info->dev = rdev->ddev;
 	atom_card_info->reg_read = cail_reg_read;
 	atom_card_info->reg_write = cail_reg_write;
+	/* needed for iio ops */
+	if (rdev->rio_mem) {
+		atom_card_info->ioreg_read = cail_ioreg_read;
+		atom_card_info->ioreg_write = cail_ioreg_write;
+	} else {
+		DRM_ERROR("Unable to find PCI I/O BAR; using MMIO for ATOM IIO\n");
+		atom_card_info->ioreg_read = cail_reg_read;
+		atom_card_info->ioreg_write = cail_reg_write;
+	}
 	atom_card_info->mc_read = cail_mc_read;
 	atom_card_info->mc_write = cail_mc_write;
 	atom_card_info->pll_read = cail_pll_read;
@@ -573,7 +598,7 @@ int radeon_device_init(struct radeon_device *rdev,
 		       struct pci_dev *pdev,
 		       uint32_t flags)
 {
-	int r;
+	int r, i;
 	int dma_bits;
 
 	rdev->shutdown = false;
@@ -650,8 +675,8 @@ int radeon_device_init(struct radeon_device *rdev,
 
 	/* Registers mapping */
 	/* TODO: block userspace mapping of io register */
-	rdev->rmmio_base = drm_get_resource_start(rdev->ddev, 2);
-	rdev->rmmio_size = drm_get_resource_len(rdev->ddev, 2);
+	rdev->rmmio_base = pci_resource_start(rdev->pdev, 2);
+	rdev->rmmio_size = pci_resource_len(rdev->pdev, 2);
 	rdev->rmmio = ioremap(rdev->rmmio_base, rdev->rmmio_size);
 	if (rdev->rmmio == NULL) {
 		return -ENOMEM;
@@ -659,6 +684,17 @@ int radeon_device_init(struct radeon_device *rdev,
 	DRM_INFO("register mmio base: 0x%08X\n", (uint32_t)rdev->rmmio_base);
 	DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size);
 
+	/* io port mapping */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		if (pci_resource_flags(rdev->pdev, i) & IORESOURCE_IO) {
+			rdev->rio_mem_size = pci_resource_len(rdev->pdev, i);
+			rdev->rio_mem = pci_iomap(rdev->pdev, i, rdev->rio_mem_size);
+			break;
+		}
+	}
+	if (rdev->rio_mem == NULL)
+		DRM_ERROR("Unable to find PCI I/O BAR\n");
+
 	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
 	/* this will fail for cards that aren't VGA class devices, just
 	 * ignore it */
@@ -701,6 +737,9 @@ void radeon_device_fini(struct radeon_device *rdev)
 	destroy_workqueue(rdev->wq);
 	vga_switcheroo_unregister_client(rdev->pdev);
 	vga_client_register(rdev->pdev, NULL, NULL, NULL);
+	if (rdev->rio_mem)
+		pci_iounmap(rdev->pdev, rdev->rio_mem);
+	rdev->rio_mem = NULL;
 	iounmap(rdev->rmmio);
 	rdev->rmmio = NULL;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 8154cdf796e..74dac9635d7 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -42,7 +42,7 @@ static void avivo_crtc_load_lut(struct drm_crtc *crtc)
 	struct radeon_device *rdev = dev->dev_private;
 	int i;
 
-	DRM_DEBUG("%d\n", radeon_crtc->crtc_id);
+	DRM_DEBUG_KMS("%d\n", radeon_crtc->crtc_id);
 	WREG32(AVIVO_DC_LUTA_CONTROL + radeon_crtc->crtc_offset, 0);
 
 	WREG32(AVIVO_DC_LUTA_BLACK_OFFSET_BLUE + radeon_crtc->crtc_offset, 0);
@@ -75,7 +75,7 @@ static void evergreen_crtc_load_lut(struct drm_crtc *crtc)
 	struct radeon_device *rdev = dev->dev_private;
 	int i;
 
-	DRM_DEBUG("%d\n", radeon_crtc->crtc_id);
+	DRM_DEBUG_KMS("%d\n", radeon_crtc->crtc_id);
 	WREG32(EVERGREEN_DC_LUT_CONTROL + radeon_crtc->crtc_offset, 0);
 
 	WREG32(EVERGREEN_DC_LUT_BLACK_OFFSET_BLUE + radeon_crtc->crtc_offset, 0);
@@ -469,7 +469,7 @@ static void radeon_compute_pll_legacy(struct radeon_pll *pll,
 	uint32_t post_div;
 	u32 pll_out_min, pll_out_max;
 
-	DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
+	DRM_DEBUG_KMS("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
 	freq = freq * 1000;
 
 	if (pll->flags & RADEON_PLL_IS_LCD) {
@@ -558,15 +558,17 @@ static void radeon_compute_pll_legacy(struct radeon_pll *pll,
 					current_freq = radeon_div(tmp, ref_div * post_div);
 
 					if (pll->flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
-						error = freq - current_freq;
-						error = error < 0 ? 0xffffffff : error;
+						if (freq < current_freq)
+							error = 0xffffffff;
+						else
+							error = freq - current_freq;
 					} else
 						error = abs(current_freq - freq);
 					vco_diff = abs(vco - best_vco);
 
 					if ((best_vco == 0 && error < best_error) ||
 					    (best_vco != 0 &&
-					     (error < best_error - 100 ||
+					     ((best_error > 100 && error < best_error - 100) ||
 					      (abs(error - best_error) < 100 && vco_diff < best_vco_diff)))) {
 						best_post_div = post_div;
 						best_ref_div = ref_div;
@@ -803,7 +805,7 @@ done:
 	*ref_div_p = ref_div;
 	*post_div_p = post_div;
 
-	DRM_DEBUG("%u %d.%d, %d, %d\n", *dot_clock_p, *fb_div_p, *frac_fb_div_p, *ref_div_p, *post_div_p);
+	DRM_DEBUG_KMS("%u %d.%d, %d, %d\n", *dot_clock_p, *fb_div_p, *frac_fb_div_p, *ref_div_p, *post_div_p);
 }
 
 void radeon_compute_pll(struct radeon_pll *pll,
@@ -919,6 +921,12 @@ static struct drm_prop_enum_list radeon_tv_std_enum_list[] =
 	{ TV_STD_SECAM, "secam" },
 };
 
+static struct drm_prop_enum_list radeon_underscan_enum_list[] =
+{	{ UNDERSCAN_OFF, "off" },
+	{ UNDERSCAN_ON, "on" },
+	{ UNDERSCAN_AUTO, "auto" },
+};
+
 static int radeon_modeset_create_props(struct radeon_device *rdev)
 {
 	int i, sz;
@@ -972,6 +980,18 @@ static int radeon_modeset_create_props(struct radeon_device *rdev)
 				      radeon_tv_std_enum_list[i].name);
 	}
 
+	sz = ARRAY_SIZE(radeon_underscan_enum_list);
+	rdev->mode_info.underscan_property =
+		drm_property_create(rdev->ddev,
+				    DRM_MODE_PROP_ENUM,
+				    "underscan", sz);
+	for (i = 0; i < sz; i++) {
+		drm_property_add_enum(rdev->mode_info.underscan_property,
+				      i,
+				      radeon_underscan_enum_list[i].type,
+				      radeon_underscan_enum_list[i].name);
+	}
+
 	return 0;
 }
 
@@ -1067,15 +1087,26 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
 				struct drm_display_mode *adjusted_mode)
 {
 	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
 	struct drm_encoder *encoder;
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 	struct radeon_encoder *radeon_encoder;
+	struct drm_connector *connector;
+	struct radeon_connector *radeon_connector;
 	bool first = true;
+	u32 src_v = 1, dst_v = 1;
+	u32 src_h = 1, dst_h = 1;
+
+	radeon_crtc->h_border = 0;
+	radeon_crtc->v_border = 0;
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		radeon_encoder = to_radeon_encoder(encoder);
 		if (encoder->crtc != crtc)
 			continue;
+		radeon_encoder = to_radeon_encoder(encoder);
+		connector = radeon_get_connector_for_encoder(encoder);
+		radeon_connector = to_radeon_connector(connector);
+
 		if (first) {
 			/* set scaling */
 			if (radeon_encoder->rmx_type == RMX_OFF)
@@ -1085,31 +1116,49 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
 				radeon_crtc->rmx_type = radeon_encoder->rmx_type;
 			else
 				radeon_crtc->rmx_type = RMX_OFF;
+			src_v = crtc->mode.vdisplay;
+			dst_v = radeon_crtc->native_mode.vdisplay;
+			src_h = crtc->mode.hdisplay;
+			dst_h = radeon_crtc->native_mode.vdisplay;
 			/* copy native mode */
 			memcpy(&radeon_crtc->native_mode,
 			       &radeon_encoder->native_mode,
 				sizeof(struct drm_display_mode));
+
+			/* fix up for overscan on hdmi */
+			if (ASIC_IS_AVIVO(rdev) &&
+			    ((radeon_encoder->underscan_type == UNDERSCAN_ON) ||
+			     ((radeon_encoder->underscan_type == UNDERSCAN_AUTO) &&
+			      drm_detect_hdmi_monitor(radeon_connector->edid)))) {
+				radeon_crtc->h_border = (mode->hdisplay >> 5) + 16;
+				radeon_crtc->v_border = (mode->vdisplay >> 5) + 16;
+				radeon_crtc->rmx_type = RMX_FULL;
+				src_v = crtc->mode.vdisplay;
+				dst_v = crtc->mode.vdisplay - (radeon_crtc->v_border * 2);
+				src_h = crtc->mode.hdisplay;
+				dst_h = crtc->mode.hdisplay - (radeon_crtc->h_border * 2);
+			}
 			first = false;
 		} else {
 			if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
 				/* WARNING: Right now this can't happen but
 				 * in the future we need to check that scaling
-				 * are consistent accross different encoder
+				 * are consistent across different encoder
 				 * (ie all encoder can work with the same
 				 *  scaling).
 				 */
-				DRM_ERROR("Scaling not consistent accross encoder.\n");
+				DRM_ERROR("Scaling not consistent across encoder.\n");
 				return false;
 			}
 		}
 	}
 	if (radeon_crtc->rmx_type != RMX_OFF) {
 		fixed20_12 a, b;
-		a.full = dfixed_const(crtc->mode.vdisplay);
-		b.full = dfixed_const(radeon_crtc->native_mode.hdisplay);
+		a.full = dfixed_const(src_v);
+		b.full = dfixed_const(dst_v);
 		radeon_crtc->vsc.full = dfixed_div(a, b);
-		a.full = dfixed_const(crtc->mode.hdisplay);
-		b.full = dfixed_const(radeon_crtc->native_mode.vdisplay);
+		a.full = dfixed_const(src_h);
+		b.full = dfixed_const(dst_h);
 		radeon_crtc->hsc.full = dfixed_div(a, b);
 	} else {
 		radeon_crtc->vsc.full = dfixed_const(1);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index e166fe4d7c3..795403b0e2c 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -46,9 +46,10 @@
  * - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
  * - 2.4.0 - add crtc id query
  * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
+ * - 2.6.0 - add tiling config query (r6xx+), add initial HiZ support (r300->r500)
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	5
+#define KMS_DRIVER_MINOR	6
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);
@@ -238,7 +239,7 @@ static struct drm_driver kms_driver;
 static int __devinit
 radeon_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	return drm_get_dev(pdev, ent, &kms_driver);
+	return drm_get_pci_dev(pdev, ent, &kms_driver);
 }
 
 static void
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index e0b30b264c2..263c8098d7d 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -205,14 +205,14 @@ void radeon_encoder_set_active_device(struct drm_encoder *encoder)
 		if (connector->encoder == encoder) {
 			struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 			radeon_encoder->active_device = radeon_encoder->devices & radeon_connector->devices;
-			DRM_DEBUG("setting active device to %08x from %08x %08x for encoder %d\n",
+			DRM_DEBUG_KMS("setting active device to %08x from %08x %08x for encoder %d\n",
 				  radeon_encoder->active_device, radeon_encoder->devices,
 				  radeon_connector->devices, encoder->encoder_type);
 		}
 	}
 }
 
-static struct drm_connector *
+struct drm_connector *
 radeon_get_connector_for_encoder(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
@@ -1021,7 +1021,7 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 
 	memset(&args, 0, sizeof(args));
 
-	DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
+	DRM_DEBUG_KMS("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
 		  radeon_encoder->encoder_id, mode, radeon_encoder->devices,
 		  radeon_encoder->active_device);
 	switch (radeon_encoder->encoder_id) {
@@ -1484,7 +1484,7 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec
 	uint32_t bios_0_scratch;
 
 	if (!atombios_dac_load_detect(encoder, connector)) {
-		DRM_DEBUG("detect returned false \n");
+		DRM_DEBUG_KMS("detect returned false \n");
 		return connector_status_unknown;
 	}
 
@@ -1493,7 +1493,7 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec
 	else
 		bios_0_scratch = RREG32(RADEON_BIOS_0_SCRATCH);
 
-	DRM_DEBUG("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+	DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
 	if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
 		if (bios_0_scratch & ATOM_S0_CRT1_MASK)
 			return connector_status_connected;
@@ -1694,6 +1694,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 	radeon_encoder->encoder_id = encoder_id;
 	radeon_encoder->devices = supported_device;
 	radeon_encoder->rmx_type = RMX_OFF;
+	radeon_encoder->underscan_type = UNDERSCAN_OFF;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
@@ -1707,6 +1708,8 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 		} else {
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
 			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+			if (ASIC_IS_AVIVO(rdev))
+				radeon_encoder->underscan_type = UNDERSCAN_AUTO;
 		}
 		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
 		break;
@@ -1736,6 +1739,8 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 		} else {
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
 			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
+			if (ASIC_IS_AVIVO(rdev))
+				radeon_encoder->underscan_type = UNDERSCAN_AUTO;
 		}
 		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
 		break;
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index ab389f89fa8..ddcd3b13f15 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -49,7 +49,7 @@ int radeon_driver_unload_kms(struct drm_device *dev)
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 {
 	struct radeon_device *rdev;
-	int r;
+	int r, acpi_status;
 
 	rdev = kzalloc(sizeof(struct radeon_device), GFP_KERNEL);
 	if (rdev == NULL) {
@@ -77,6 +77,12 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 		dev_err(&dev->pdev->dev, "Fatal error during GPU init\n");
 		goto out;
 	}
+
+	/* Call ACPI methods */
+	acpi_status = radeon_acpi_init(rdev);
+	if (acpi_status)
+		dev_dbg(&dev->pdev->dev, "Error during ACPI methods call\n");
+
 	/* Again modeset_init should fail only on fatal error
 	 * otherwise it should provide enough functionalities
 	 * for shadowfb to run
@@ -135,15 +141,36 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 			}
 		}
 		if (!found) {
-			DRM_DEBUG("unknown crtc id %d\n", value);
+			DRM_DEBUG_KMS("unknown crtc id %d\n", value);
 			return -EINVAL;
 		}
 		break;
 	case RADEON_INFO_ACCEL_WORKING2:
 		value = rdev->accel_working;
 		break;
+	case RADEON_INFO_TILING_CONFIG:
+		if (rdev->family >= CHIP_CEDAR)
+			value = rdev->config.evergreen.tile_config;
+		else if (rdev->family >= CHIP_RV770)
+			value = rdev->config.rv770.tile_config;
+		else if (rdev->family >= CHIP_R600)
+			value = rdev->config.r600.tile_config;
+		else {
+			DRM_DEBUG_KMS("tiling config is r6xx+ only!\n");
+			return -EINVAL;
+		}
+	case RADEON_INFO_WANT_HYPERZ:
+		mutex_lock(&dev->struct_mutex);
+		if (rdev->hyperz_filp)
+			value = 0;
+		else {
+			rdev->hyperz_filp = filp;
+			value = 1;
+		}
+		mutex_unlock(&dev->struct_mutex);
+		break;
 	default:
-		DRM_DEBUG("Invalid request %d\n", info->request);
+		DRM_DEBUG_KMS("Invalid request %d\n", info->request);
 		return -EINVAL;
 	}
 	if (DRM_COPY_TO_USER(value_ptr, &value, sizeof(uint32_t))) {
@@ -181,9 +208,11 @@ void radeon_driver_postclose_kms(struct drm_device *dev,
 void radeon_driver_preclose_kms(struct drm_device *dev,
 				struct drm_file *file_priv)
 {
+	struct radeon_device *rdev = dev->dev_private;
+	if (rdev->hyperz_filp == file_priv)
+		rdev->hyperz_filp = NULL;
 }
 
-
 /*
  * VBlank related functions.
  */
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index e1e5255396a..989df519a1e 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -362,10 +362,10 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	uint32_t gen_cntl_reg, gen_cntl_val;
 	int r;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 	/* no fb bound */
 	if (!crtc->fb) {
-		DRM_DEBUG("No FB bound\n");
+		DRM_DEBUG_KMS("No FB bound\n");
 		return 0;
 	}
 
@@ -528,7 +528,7 @@ static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mod
 	uint32_t crtc_v_sync_strt_wid;
 	bool is_tv = false;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
 		if (encoder->crtc == crtc) {
 			struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
@@ -757,7 +757,7 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 		}
 	}
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	if (!use_bios_divs) {
 		radeon_compute_pll(pll, mode->clock,
@@ -772,7 +772,7 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 		if (!post_div->divider)
 			post_div = &post_divs[0];
 
-		DRM_DEBUG("dc=%u, fd=%d, rd=%d, pd=%d\n",
+		DRM_DEBUG_KMS("dc=%u, fd=%d, rd=%d, pd=%d\n",
 			  (unsigned)freq,
 			  feedback_div,
 			  reference_div,
@@ -841,12 +841,12 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 			       | RADEON_P2PLL_SLEEP
 			       | RADEON_P2PLL_ATOMIC_UPDATE_EN));
 
-		DRM_DEBUG("Wrote2: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
+		DRM_DEBUG_KMS("Wrote2: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
 			  (unsigned)pll_ref_div,
 			  (unsigned)pll_fb_post_div,
 			  (unsigned)htotal_cntl,
 			  RREG32_PLL(RADEON_P2PLL_CNTL));
-		DRM_DEBUG("Wrote2: rd=%u, fd=%u, pd=%u\n",
+		DRM_DEBUG_KMS("Wrote2: rd=%u, fd=%u, pd=%u\n",
 			  (unsigned)pll_ref_div & RADEON_P2PLL_REF_DIV_MASK,
 			  (unsigned)pll_fb_post_div & RADEON_P2PLL_FB0_DIV_MASK,
 			  (unsigned)((pll_fb_post_div &
@@ -947,12 +947,12 @@ static void radeon_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 			       | RADEON_PPLL_ATOMIC_UPDATE_EN
 			       | RADEON_PPLL_VGA_ATOMIC_UPDATE_EN));
 
-		DRM_DEBUG("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
+		DRM_DEBUG_KMS("Wrote: 0x%08x 0x%08x 0x%08x (0x%08x)\n",
 			  pll_ref_div,
 			  pll_fb_post_div,
 			  (unsigned)htotal_cntl,
 			  RREG32_PLL(RADEON_PPLL_CNTL));
-		DRM_DEBUG("Wrote: rd=%d, fd=%d, pd=%d\n",
+		DRM_DEBUG_KMS("Wrote: rd=%d, fd=%d, pd=%d\n",
 			  pll_ref_div & RADEON_PPLL_REF_DIV_MASK,
 			  pll_fb_post_div & RADEON_PPLL_FB3_DIV_MASK,
 			  (pll_fb_post_div & RADEON_PPLL_POST3_DIV_MASK) >> 16);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 5688a0cf6bb..b8149cbc0c7 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -47,7 +47,7 @@ static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
 	uint32_t lvds_gen_cntl, lvds_pll_cntl, pixclks_cntl, disp_pwr_man;
 	int panel_pwr_delay = 2000;
 	bool is_mac = false;
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	if (radeon_encoder->enc_priv) {
 		if (rdev->is_atom_bios) {
@@ -151,7 +151,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t lvds_pll_cntl, lvds_gen_cntl, lvds_ss_gen_cntl;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
 	lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
@@ -167,7 +167,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 	} else {
 		struct radeon_encoder_lvds *lvds = (struct radeon_encoder_lvds *)radeon_encoder->enc_priv;
 		if (lvds) {
-			DRM_DEBUG("bios LVDS_GEN_CNTL: 0x%x\n", lvds->lvds_gen_cntl);
+			DRM_DEBUG_KMS("bios LVDS_GEN_CNTL: 0x%x\n", lvds->lvds_gen_cntl);
 			lvds_gen_cntl = lvds->lvds_gen_cntl;
 			lvds_ss_gen_cntl &= ~((0xf << RADEON_LVDS_PWRSEQ_DELAY1_SHIFT) |
 					      (0xf << RADEON_LVDS_PWRSEQ_DELAY2_SHIFT));
@@ -250,7 +250,7 @@ static void radeon_legacy_primary_dac_dpms(struct drm_encoder *encoder, int mode
 	uint32_t dac_cntl = RREG32(RADEON_DAC_CNTL);
 	uint32_t dac_macro_cntl = RREG32(RADEON_DAC_MACRO_CNTL);
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -315,7 +315,7 @@ static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder,
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t disp_output_cntl, dac_cntl, dac2_cntl, dac_macro_cntl;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	if (radeon_crtc->crtc_id == 0) {
 		if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
@@ -446,7 +446,7 @@ static void radeon_legacy_tmds_int_dpms(struct drm_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	uint32_t fp_gen_cntl = RREG32(RADEON_FP_GEN_CNTL);
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -502,7 +502,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
 	uint32_t tmp, tmds_pll_cntl, tmds_transmitter_cntl, fp_gen_cntl;
 	int i;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
 	tmp &= 0xfffff;
@@ -610,7 +610,7 @@ static void radeon_legacy_tmds_ext_dpms(struct drm_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	uint32_t fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
@@ -666,7 +666,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	uint32_t fp2_gen_cntl;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	if (rdev->is_atom_bios) {
 		radeon_encoder->pixel_clock = adjusted_mode->clock;
@@ -760,7 +760,7 @@ static void radeon_legacy_tv_dac_dpms(struct drm_encoder *encoder, int mode)
 	uint32_t fp2_gen_cntl = 0, crtc2_gen_cntl = 0, tv_dac_cntl = 0;
 	uint32_t tv_master_cntl = 0;
 	bool is_tv;
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	is_tv = radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT ? true : false;
 
@@ -878,7 +878,7 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 	uint32_t disp_hw_debug = 0, fp2_gen_cntl = 0, disp_tv_out_cntl = 0;
 	bool is_tv = false;
 
-	DRM_DEBUG("\n");
+	DRM_DEBUG_KMS("\n");
 
 	is_tv = radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT ? true : false;
 
@@ -1075,10 +1075,10 @@ static bool r300_legacy_tv_detect(struct drm_encoder *encoder,
 	tmp = RREG32(RADEON_TV_DAC_CNTL);
 	if ((tmp & RADEON_TV_DAC_GDACDET) != 0) {
 		found = true;
-		DRM_DEBUG("S-video TV connection detected\n");
+		DRM_DEBUG_KMS("S-video TV connection detected\n");
 	} else if ((tmp & RADEON_TV_DAC_BDACDET) != 0) {
 		found = true;
-		DRM_DEBUG("Composite TV connection detected\n");
+		DRM_DEBUG_KMS("Composite TV connection detected\n");
 	}
 
 	WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
@@ -1141,10 +1141,10 @@ static bool radeon_legacy_tv_detect(struct drm_encoder *encoder,
 	tmp = RREG32(RADEON_TV_DAC_CNTL);
 	if (tmp & RADEON_TV_DAC_GDACDET) {
 		found = true;
-		DRM_DEBUG("S-video TV connection detected\n");
+		DRM_DEBUG_KMS("S-video TV connection detected\n");
 	} else if ((tmp & RADEON_TV_DAC_BDACDET) != 0) {
 		found = true;
-		DRM_DEBUG("Composite TV connection detected\n");
+		DRM_DEBUG_KMS("Composite TV connection detected\n");
 	}
 
 	WREG32(RADEON_TV_PRE_DAC_MUX_CNTL, tv_pre_dac_mux_cntl);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_tv.c b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
index 03204039774..c7b6cb428d0 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_tv.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_tv.c
@@ -496,7 +496,7 @@ static bool radeon_legacy_tv_init_restarts(struct drm_encoder *encoder)
 
 	restart -= v_offset + h_offset;
 
-	DRM_DEBUG("compute_restarts: def = %u h = %d v = %d, p1 = %04x, p2 = %04x, restart = %d\n",
+	DRM_DEBUG_KMS("compute_restarts: def = %u h = %d v = %d, p1 = %04x, p2 = %04x, restart = %d\n",
 		  const_ptr->def_restart, tv_dac->h_pos, tv_dac->v_pos, p1, p2, restart);
 
 	tv_dac->tv.hrestart = restart % h_total;
@@ -505,7 +505,7 @@ static bool radeon_legacy_tv_init_restarts(struct drm_encoder *encoder)
 	restart /= v_total;
 	tv_dac->tv.frestart = restart % f_total;
 
-	DRM_DEBUG("compute_restart: F/H/V=%u,%u,%u\n",
+	DRM_DEBUG_KMS("compute_restart: F/H/V=%u,%u,%u\n",
 		  (unsigned)tv_dac->tv.frestart,
 		  (unsigned)tv_dac->tv.vrestart,
 		  (unsigned)tv_dac->tv.hrestart);
@@ -523,7 +523,7 @@ static bool radeon_legacy_tv_init_restarts(struct drm_encoder *encoder)
 	tv_dac->tv.timing_cntl = (tv_dac->tv.timing_cntl & ~RADEON_H_INC_MASK) |
 		((u32)h_inc << RADEON_H_INC_SHIFT);
 
-	DRM_DEBUG("compute_restart: h_size = %d h_inc = %d\n", tv_dac->h_size, h_inc);
+	DRM_DEBUG_KMS("compute_restart: h_size = %d h_inc = %d\n", tv_dac->h_size, h_inc);
 
 	return h_changed;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 95696aa57ac..71aea4037e9 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -66,6 +66,12 @@ enum radeon_tv_std {
 	TV_STD_PAL_N,
 };
 
+enum radeon_underscan_type {
+	UNDERSCAN_OFF,
+	UNDERSCAN_ON,
+	UNDERSCAN_AUTO,
+};
+
 enum radeon_hpd_id {
 	RADEON_HPD_1 = 0,
 	RADEON_HPD_2,
@@ -226,10 +232,12 @@ struct radeon_mode_info {
 	struct drm_property *coherent_mode_property;
 	/* DAC enable load detect */
 	struct drm_property *load_detect_property;
-	/* TV standard load detect */
+	/* TV standard */
 	struct drm_property *tv_std_property;
 	/* legacy TMDS PLL detect */
 	struct drm_property *tmds_pll_property;
+	/* underscan */
+	struct drm_property *underscan_property;
 	/* hardcoded DFP edid from BIOS */
 	struct edid *bios_hardcoded_edid;
 
@@ -266,6 +274,8 @@ struct radeon_crtc {
 	uint32_t legacy_display_base_addr;
 	uint32_t legacy_cursor_offset;
 	enum radeon_rmx_type rmx_type;
+	u8 h_border;
+	u8 v_border;
 	fixed20_12 vsc;
 	fixed20_12 hsc;
 	struct drm_display_mode native_mode;
@@ -354,6 +364,7 @@ struct radeon_encoder {
 	uint32_t flags;
 	uint32_t pixel_clock;
 	enum radeon_rmx_type rmx_type;
+	enum radeon_underscan_type underscan_type;
 	struct drm_display_mode native_mode;
 	void *enc_priv;
 	int audio_polling_active;
@@ -392,7 +403,7 @@ struct radeon_connector {
 	uint32_t connector_id;
 	uint32_t devices;
 	struct radeon_i2c_chan *ddc_bus;
-	/* some systems have a an hdmi and vga port with a shared ddc line */
+	/* some systems have an hdmi and vga port with a shared ddc line */
 	bool shared_ddc;
 	bool use_digital;
 	/* we need to mind the EDID between detect
@@ -414,6 +425,9 @@ radeon_combios_get_tv_info(struct radeon_device *rdev);
 extern enum radeon_tv_std
 radeon_atombios_get_tv_info(struct radeon_device *rdev);
 
+extern struct drm_connector *
+radeon_get_connector_for_encoder(struct drm_encoder *encoder);
+
 extern void radeon_connector_hotplug(struct drm_connector *connector);
 extern bool radeon_dp_needs_link_train(struct radeon_connector *radeon_connector);
 extern int radeon_dp_mode_valid_helper(struct radeon_connector *radeon_connector,
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d5b9373ce06..0afd1e62347 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -110,6 +110,7 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 	bo->surface_reg = -1;
 	INIT_LIST_HEAD(&bo->list);
 
+retry:
 	radeon_ttm_placement_from_domain(bo, domain);
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);
@@ -118,10 +119,15 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 			&radeon_ttm_bo_destroy);
 	mutex_unlock(&rdev->vram_mutex);
 	if (unlikely(r != 0)) {
-		if (r != -ERESTARTSYS)
+		if (r != -ERESTARTSYS) {
+			if (domain == RADEON_GEM_DOMAIN_VRAM) {
+				domain |= RADEON_GEM_DOMAIN_GTT;
+				goto retry;
+			}
 			dev_err(rdev->dev,
 				"object_init failed for (%lu, 0x%08X)\n",
 				size, domain);
+		}
 		return r;
 	}
 	*bo_ptr = bo;
@@ -321,6 +327,7 @@ int radeon_bo_list_validate(struct list_head *head)
 {
 	struct radeon_bo_list *lobj;
 	struct radeon_bo *bo;
+	u32 domain;
 	int r;
 
 	list_for_each_entry(lobj, head, list) {
@@ -333,17 +340,19 @@ int radeon_bo_list_validate(struct list_head *head)
 	list_for_each_entry(lobj, head, list) {
 		bo = lobj->bo;
 		if (!bo->pin_count) {
-			if (lobj->wdomain) {
-				radeon_ttm_placement_from_domain(bo,
-								lobj->wdomain);
-			} else {
-				radeon_ttm_placement_from_domain(bo,
-								lobj->rdomain);
-			}
+			domain = lobj->wdomain ? lobj->wdomain : lobj->rdomain;
+			
+		retry:
+			radeon_ttm_placement_from_domain(bo, domain);
 			r = ttm_bo_validate(&bo->tbo, &bo->placement,
 						true, false, false);
-			if (unlikely(r))
+			if (unlikely(r)) {
+				if (r != -ERESTARTSYS && domain == RADEON_GEM_DOMAIN_VRAM) {
+					domain |= RADEON_GEM_DOMAIN_GTT;
+					goto retry;
+				}
 				return r;
+			}
 		}
 		lobj->gpu_offset = radeon_bo_gpu_offset(bo);
 		lobj->tiling_flags = bo->tiling_flags;
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 3fa6984d989..95f8b3a3c43 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -27,6 +27,8 @@
 #include <linux/acpi.h>
 #endif
 #include <linux/power_supply.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 
 #define RADEON_IDLE_LOOP_MS 100
 #define RADEON_RECLOCK_DELAY_MS 200
@@ -60,9 +62,9 @@ static int radeon_acpi_event(struct notifier_block *nb,
 
 	if (strcmp(entry->device_class, ACPI_AC_CLASS) == 0) {
 		if (power_supply_is_system_supplied() > 0)
-			DRM_DEBUG("pm: AC\n");
+			DRM_DEBUG_DRIVER("pm: AC\n");
 		else
-			DRM_DEBUG("pm: DC\n");
+			DRM_DEBUG_DRIVER("pm: DC\n");
 
 		if (rdev->pm.pm_method == PM_METHOD_PROFILE) {
 			if (rdev->pm.profile == PM_PROFILE_AUTO) {
@@ -196,7 +198,7 @@ static void radeon_set_power_state(struct radeon_device *rdev)
 			radeon_set_engine_clock(rdev, sclk);
 			radeon_pm_debug_check_in_vbl(rdev, true);
 			rdev->pm.current_sclk = sclk;
-			DRM_DEBUG("Setting: e: %d\n", sclk);
+			DRM_DEBUG_DRIVER("Setting: e: %d\n", sclk);
 		}
 
 		/* set memory clock */
@@ -205,7 +207,7 @@ static void radeon_set_power_state(struct radeon_device *rdev)
 			radeon_set_memory_clock(rdev, mclk);
 			radeon_pm_debug_check_in_vbl(rdev, true);
 			rdev->pm.current_mclk = mclk;
-			DRM_DEBUG("Setting: m: %d\n", mclk);
+			DRM_DEBUG_DRIVER("Setting: m: %d\n", mclk);
 		}
 
 		if (misc_after)
@@ -217,7 +219,7 @@ static void radeon_set_power_state(struct radeon_device *rdev)
 		rdev->pm.current_power_state_index = rdev->pm.requested_power_state_index;
 		rdev->pm.current_clock_mode_index = rdev->pm.requested_clock_mode_index;
 	} else
-		DRM_DEBUG("pm: GUI not idle!!!\n");
+		DRM_DEBUG_DRIVER("pm: GUI not idle!!!\n");
 }
 
 static void radeon_pm_set_clocks(struct radeon_device *rdev)
@@ -292,27 +294,27 @@ static void radeon_pm_print_states(struct radeon_device *rdev)
 	struct radeon_power_state *power_state;
 	struct radeon_pm_clock_info *clock_info;
 
-	DRM_DEBUG("%d Power State(s)\n", rdev->pm.num_power_states);
+	DRM_DEBUG_DRIVER("%d Power State(s)\n", rdev->pm.num_power_states);
 	for (i = 0; i < rdev->pm.num_power_states; i++) {
 		power_state = &rdev->pm.power_state[i];
-		DRM_DEBUG("State %d: %s\n", i,
+		DRM_DEBUG_DRIVER("State %d: %s\n", i,
 			radeon_pm_state_type_name[power_state->type]);
 		if (i == rdev->pm.default_power_state_index)
-			DRM_DEBUG("\tDefault");
+			DRM_DEBUG_DRIVER("\tDefault");
 		if ((rdev->flags & RADEON_IS_PCIE) && !(rdev->flags & RADEON_IS_IGP))
-			DRM_DEBUG("\t%d PCIE Lanes\n", power_state->pcie_lanes);
+			DRM_DEBUG_DRIVER("\t%d PCIE Lanes\n", power_state->pcie_lanes);
 		if (power_state->flags & RADEON_PM_STATE_SINGLE_DISPLAY_ONLY)
-			DRM_DEBUG("\tSingle display only\n");
-		DRM_DEBUG("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
+			DRM_DEBUG_DRIVER("\tSingle display only\n");
+		DRM_DEBUG_DRIVER("\t%d Clock Mode(s)\n", power_state->num_clock_modes);
 		for (j = 0; j < power_state->num_clock_modes; j++) {
 			clock_info = &(power_state->clock_info[j]);
 			if (rdev->flags & RADEON_IS_IGP)
-				DRM_DEBUG("\t\t%d e: %d%s\n",
+				DRM_DEBUG_DRIVER("\t\t%d e: %d%s\n",
 					j,
 					clock_info->sclk * 10,
 					clock_info->flags & RADEON_PM_MODE_NO_DISPLAY ? "\tNo display only" : "");
 			else
-				DRM_DEBUG("\t\t%d e: %d\tm: %d\tv: %d%s\n",
+				DRM_DEBUG_DRIVER("\t\t%d e: %d\tm: %d\tv: %d%s\n",
 					j,
 					clock_info->sclk * 10,
 					clock_info->mclk * 10,
@@ -424,6 +426,82 @@ fail:
 static DEVICE_ATTR(power_profile, S_IRUGO | S_IWUSR, radeon_get_pm_profile, radeon_set_pm_profile);
 static DEVICE_ATTR(power_method, S_IRUGO | S_IWUSR, radeon_get_pm_method, radeon_set_pm_method);
 
+static ssize_t radeon_hwmon_show_temp(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct drm_device *ddev = pci_get_drvdata(to_pci_dev(dev));
+	struct radeon_device *rdev = ddev->dev_private;
+	u32 temp;
+
+	switch (rdev->pm.int_thermal_type) {
+	case THERMAL_TYPE_RV6XX:
+		temp = rv6xx_get_temp(rdev);
+		break;
+	case THERMAL_TYPE_RV770:
+		temp = rv770_get_temp(rdev);
+		break;
+	case THERMAL_TYPE_EVERGREEN:
+		temp = evergreen_get_temp(rdev);
+		break;
+	default:
+		temp = 0;
+		break;
+	}
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", temp);
+}
+
+static ssize_t radeon_hwmon_show_name(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	return sprintf(buf, "radeon\n");
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, radeon_hwmon_show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, radeon_hwmon_show_name, NULL, 0);
+
+static struct attribute *hwmon_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_name.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group hwmon_attrgroup = {
+	.attrs = hwmon_attributes,
+};
+
+static void radeon_hwmon_init(struct radeon_device *rdev)
+{
+	int err;
+
+	rdev->pm.int_hwmon_dev = NULL;
+
+	switch (rdev->pm.int_thermal_type) {
+	case THERMAL_TYPE_RV6XX:
+	case THERMAL_TYPE_RV770:
+	case THERMAL_TYPE_EVERGREEN:
+		rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+		dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
+		err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
+					 &hwmon_attrgroup);
+		if (err)
+			DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+		break;
+	default:
+		break;
+	}
+}
+
+static void radeon_hwmon_fini(struct radeon_device *rdev)
+{
+	if (rdev->pm.int_hwmon_dev) {
+		sysfs_remove_group(&rdev->pm.int_hwmon_dev->kobj, &hwmon_attrgroup);
+		hwmon_device_unregister(rdev->pm.int_hwmon_dev);
+	}
+}
+
 void radeon_pm_suspend(struct radeon_device *rdev)
 {
 	bool flush_wq = false;
@@ -471,6 +549,7 @@ int radeon_pm_init(struct radeon_device *rdev)
 	rdev->pm.dynpm_can_downclock = true;
 	rdev->pm.current_sclk = rdev->clock.default_sclk;
 	rdev->pm.current_mclk = rdev->clock.default_mclk;
+	rdev->pm.int_thermal_type = THERMAL_TYPE_NONE;
 
 	if (rdev->bios) {
 		if (rdev->is_atom_bios)
@@ -481,6 +560,8 @@ int radeon_pm_init(struct radeon_device *rdev)
 		radeon_pm_init_profile(rdev);
 	}
 
+	/* set up the internal thermal sensor if applicable */
+	radeon_hwmon_init(rdev);
 	if (rdev->pm.num_power_states > 1) {
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);
@@ -536,6 +617,7 @@ void radeon_pm_fini(struct radeon_device *rdev)
 #endif
 	}
 
+	radeon_hwmon_fini(rdev);
 	if (rdev->pm.i2c_bus)
 		radeon_i2c_destroy(rdev->pm.i2c_bus);
 }
@@ -576,7 +658,7 @@ void radeon_pm_compute_clocks(struct radeon_device *rdev)
 					radeon_pm_get_dynpm_state(rdev);
 					radeon_pm_set_clocks(rdev);
 
-					DRM_DEBUG("radeon: dynamic power management deactivated\n");
+					DRM_DEBUG_DRIVER("radeon: dynamic power management deactivated\n");
 				}
 			} else if (rdev->pm.active_crtc_count == 1) {
 				/* TODO: Increase clocks if needed for current mode */
@@ -593,7 +675,7 @@ void radeon_pm_compute_clocks(struct radeon_device *rdev)
 					rdev->pm.dynpm_state = DYNPM_STATE_ACTIVE;
 					queue_delayed_work(rdev->wq, &rdev->pm.dynpm_idle_work,
 							   msecs_to_jiffies(RADEON_IDLE_LOOP_MS));
-					DRM_DEBUG("radeon: dynamic power management activated\n");
+					DRM_DEBUG_DRIVER("radeon: dynamic power management activated\n");
 				}
 			} else { /* count == 0 */
 				if (rdev->pm.dynpm_state != DYNPM_STATE_MINIMUM) {
@@ -689,7 +771,7 @@ static bool radeon_pm_debug_check_in_vbl(struct radeon_device *rdev, bool finish
 	bool in_vbl = radeon_pm_in_vbl(rdev);
 
 	if (in_vbl == false)
-		DRM_DEBUG("not in vbl for pm change %08x at %s\n", stat_crtc,
+		DRM_DEBUG_DRIVER("not in vbl for pm change %08x at %s\n", stat_crtc,
 			 finish ? "exit" : "entry");
 	return in_vbl;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index e9918d88f5b..84c53e41a88 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -59,28 +59,28 @@ static struct radeon_device *radeon_get_rdev(struct ttm_bo_device *bdev)
 /*
  * Global memory.
  */
-static int radeon_ttm_mem_global_init(struct ttm_global_reference *ref)
+static int radeon_ttm_mem_global_init(struct drm_global_reference *ref)
 {
 	return ttm_mem_global_init(ref->object);
 }
 
-static void radeon_ttm_mem_global_release(struct ttm_global_reference *ref)
+static void radeon_ttm_mem_global_release(struct drm_global_reference *ref)
 {
 	ttm_mem_global_release(ref->object);
 }
 
 static int radeon_ttm_global_init(struct radeon_device *rdev)
 {
-	struct ttm_global_reference *global_ref;
+	struct drm_global_reference *global_ref;
 	int r;
 
 	rdev->mman.mem_global_referenced = false;
 	global_ref = &rdev->mman.mem_global_ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_MEM;
+	global_ref->global_type = DRM_GLOBAL_TTM_MEM;
 	global_ref->size = sizeof(struct ttm_mem_global);
 	global_ref->init = &radeon_ttm_mem_global_init;
 	global_ref->release = &radeon_ttm_mem_global_release;
-	r = ttm_global_item_ref(global_ref);
+	r = drm_global_item_ref(global_ref);
 	if (r != 0) {
 		DRM_ERROR("Failed setting up TTM memory accounting "
 			  "subsystem.\n");
@@ -90,14 +90,14 @@ static int radeon_ttm_global_init(struct radeon_device *rdev)
 	rdev->mman.bo_global_ref.mem_glob =
 		rdev->mman.mem_global_ref.object;
 	global_ref = &rdev->mman.bo_global_ref.ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_BO;
+	global_ref->global_type = DRM_GLOBAL_TTM_BO;
 	global_ref->size = sizeof(struct ttm_bo_global);
 	global_ref->init = &ttm_bo_global_init;
 	global_ref->release = &ttm_bo_global_release;
-	r = ttm_global_item_ref(global_ref);
+	r = drm_global_item_ref(global_ref);
 	if (r != 0) {
 		DRM_ERROR("Failed setting up TTM BO subsystem.\n");
-		ttm_global_item_unref(&rdev->mman.mem_global_ref);
+		drm_global_item_unref(&rdev->mman.mem_global_ref);
 		return r;
 	}
 
@@ -108,8 +108,8 @@ static int radeon_ttm_global_init(struct radeon_device *rdev)
 static void radeon_ttm_global_fini(struct radeon_device *rdev)
 {
 	if (rdev->mman.mem_global_referenced) {
-		ttm_global_item_unref(&rdev->mman.bo_global_ref.ref);
-		ttm_global_item_unref(&rdev->mman.mem_global_ref);
+		drm_global_item_unref(&rdev->mman.bo_global_ref.ref);
+		drm_global_item_unref(&rdev->mman.mem_global_ref);
 		rdev->mman.mem_global_referenced = false;
 	}
 }
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r300 b/drivers/gpu/drm/radeon/reg_srcs/r300
index 1e97b2d129f..b506ec1cab4 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r300
+++ b/drivers/gpu/drm/radeon/reg_srcs/r300
@@ -187,7 +187,6 @@ r300 0x4f60
 0x4364 RS_INST_13
 0x4368 RS_INST_14
 0x436C RS_INST_15
-0x43A4 SC_HYPERZ_EN
 0x43A8 SC_EDGERULE
 0x43B0 SC_CLIP_0_A
 0x43B4 SC_CLIP_0_B
@@ -716,16 +715,4 @@ r300 0x4f60
 0x4F08 ZB_STENCILREFMASK
 0x4F14 ZB_ZTOP
 0x4F18 ZB_ZCACHE_CTLSTAT
-0x4F1C ZB_BW_CNTL
-0x4F28 ZB_DEPTHCLEARVALUE
-0x4F30 ZB_ZMASK_OFFSET
-0x4F34 ZB_ZMASK_PITCH
-0x4F38 ZB_ZMASK_WRINDEX
-0x4F3C ZB_ZMASK_DWORD
-0x4F40 ZB_ZMASK_RDINDEX
-0x4F44 ZB_HIZ_OFFSET
-0x4F48 ZB_HIZ_WRINDEX
-0x4F4C ZB_HIZ_DWORD
-0x4F50 ZB_HIZ_RDINDEX
-0x4F54 ZB_HIZ_PITCH
 0x4F58 ZB_ZPASS_DATA
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r420 b/drivers/gpu/drm/radeon/reg_srcs/r420
index e958980d00f..8c1214c2390 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r420
+++ b/drivers/gpu/drm/radeon/reg_srcs/r420
@@ -130,6 +130,7 @@ r420 0x4f60
 0x401C GB_SELECT
 0x4020 GB_AA_CONFIG
 0x4024 GB_FIFO_SIZE
+0x4028 GB_Z_PEQ_CONFIG
 0x4100 TX_INVALTAGS
 0x4200 GA_POINT_S0
 0x4204 GA_POINT_T0
@@ -187,7 +188,6 @@ r420 0x4f60
 0x4364 RS_INST_13
 0x4368 RS_INST_14
 0x436C RS_INST_15
-0x43A4 SC_HYPERZ_EN
 0x43A8 SC_EDGERULE
 0x43B0 SC_CLIP_0_A
 0x43B4 SC_CLIP_0_B
@@ -782,16 +782,4 @@ r420 0x4f60
 0x4F08 ZB_STENCILREFMASK
 0x4F14 ZB_ZTOP
 0x4F18 ZB_ZCACHE_CTLSTAT
-0x4F1C ZB_BW_CNTL
-0x4F28 ZB_DEPTHCLEARVALUE
-0x4F30 ZB_ZMASK_OFFSET
-0x4F34 ZB_ZMASK_PITCH
-0x4F38 ZB_ZMASK_WRINDEX
-0x4F3C ZB_ZMASK_DWORD
-0x4F40 ZB_ZMASK_RDINDEX
-0x4F44 ZB_HIZ_OFFSET
-0x4F48 ZB_HIZ_WRINDEX
-0x4F4C ZB_HIZ_DWORD
-0x4F50 ZB_HIZ_RDINDEX
-0x4F54 ZB_HIZ_PITCH
 0x4F58 ZB_ZPASS_DATA
diff --git a/drivers/gpu/drm/radeon/reg_srcs/rs600 b/drivers/gpu/drm/radeon/reg_srcs/rs600
index 83e8bc0c2bb..0828d80396f 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/rs600
+++ b/drivers/gpu/drm/radeon/reg_srcs/rs600
@@ -187,7 +187,6 @@ rs600 0x6d40
 0x4364 RS_INST_13
 0x4368 RS_INST_14
 0x436C RS_INST_15
-0x43A4 SC_HYPERZ_EN
 0x43A8 SC_EDGERULE
 0x43B0 SC_CLIP_0_A
 0x43B4 SC_CLIP_0_B
@@ -782,16 +781,4 @@ rs600 0x6d40
 0x4F08 ZB_STENCILREFMASK
 0x4F14 ZB_ZTOP
 0x4F18 ZB_ZCACHE_CTLSTAT
-0x4F1C ZB_BW_CNTL
-0x4F28 ZB_DEPTHCLEARVALUE
-0x4F30 ZB_ZMASK_OFFSET
-0x4F34 ZB_ZMASK_PITCH
-0x4F38 ZB_ZMASK_WRINDEX
-0x4F3C ZB_ZMASK_DWORD
-0x4F40 ZB_ZMASK_RDINDEX
-0x4F44 ZB_HIZ_OFFSET
-0x4F48 ZB_HIZ_WRINDEX
-0x4F4C ZB_HIZ_DWORD
-0x4F50 ZB_HIZ_RDINDEX
-0x4F54 ZB_HIZ_PITCH
 0x4F58 ZB_ZPASS_DATA
diff --git a/drivers/gpu/drm/radeon/reg_srcs/rv515 b/drivers/gpu/drm/radeon/reg_srcs/rv515
index 1e46233985e..8293855f5f0 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/rv515
+++ b/drivers/gpu/drm/radeon/reg_srcs/rv515
@@ -235,7 +235,6 @@ rv515 0x6d40
 0x4354 RS_INST_13
 0x4358 RS_INST_14
 0x435C RS_INST_15
-0x43A4 SC_HYPERZ_EN
 0x43A8 SC_EDGERULE
 0x43B0 SC_CLIP_0_A
 0x43B4 SC_CLIP_0_B
@@ -479,17 +478,5 @@ rv515 0x6d40
 0x4F08 ZB_STENCILREFMASK
 0x4F14 ZB_ZTOP
 0x4F18 ZB_ZCACHE_CTLSTAT
-0x4F1C ZB_BW_CNTL
-0x4F28 ZB_DEPTHCLEARVALUE
-0x4F30 ZB_ZMASK_OFFSET
-0x4F34 ZB_ZMASK_PITCH
-0x4F38 ZB_ZMASK_WRINDEX
-0x4F3C ZB_ZMASK_DWORD
-0x4F40 ZB_ZMASK_RDINDEX
-0x4F44 ZB_HIZ_OFFSET
-0x4F48 ZB_HIZ_WRINDEX
-0x4F4C ZB_HIZ_DWORD
-0x4F50 ZB_HIZ_RDINDEX
-0x4F54 ZB_HIZ_PITCH
 0x4F58 ZB_ZPASS_DATA
 0x4FD4 ZB_STENCILREFMASK_BF
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index f454c9a5e7f..ae2b76b9a38 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -55,14 +55,6 @@ void rs400_gart_adjust_size(struct radeon_device *rdev)
 		rdev->mc.gtt_size = 32 * 1024 * 1024;
 		return;
 	}
-	if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
-		/* FIXME: RS400 & RS480 seems to have issue with GART size
-		 * if 4G of system memory (needs more testing)
-		 */
-		/* XXX is this still an issue with proper alignment? */
-		rdev->mc.gtt_size = 32 * 1024 * 1024;
-		DRM_ERROR("Forcing to 32M GART size (because of ASIC bug ?)\n");
-	}
 }
 
 void rs400_gart_tlb_flush(struct radeon_device *rdev)
@@ -483,6 +475,8 @@ int rs400_init(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 	/* TODO: disable VGA need to use VGA request */
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
 		if (ASIC_IS_AVIVO(rdev))
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 6dc15ea8ba3..cc05b230d7e 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -686,8 +686,8 @@ void rs600_mc_init(struct radeon_device *rdev)
 {
 	u64 base;
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	rdev->mc.vram_is_ddr = true;
 	rdev->mc.vram_width = 128;
 	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
@@ -696,7 +696,6 @@ void rs600_mc_init(struct radeon_device *rdev)
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	base = RREG32_MC(R_000004_MC_FB_LOCATION);
 	base = G_000004_MC_FB_START(base) << 16;
-	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
 	rdev->mc.gtt_base_align = 0;
 	radeon_gtt_location(rdev, &rdev->mc);
@@ -813,6 +812,13 @@ static int rs600_startup(struct radeon_device *rdev)
 		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
 		return r;
 	}
+
+	r = r600_audio_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failed initializing audio\n");
+		return r;
+	}
+
 	return 0;
 }
 
@@ -839,6 +845,7 @@ int rs600_resume(struct radeon_device *rdev)
 
 int rs600_suspend(struct radeon_device *rdev)
 {
+	r600_audio_fini(rdev);
 	r100_cp_disable(rdev);
 	r100_wb_disable(rdev);
 	rs600_irq_disable(rdev);
@@ -848,6 +855,7 @@ int rs600_suspend(struct radeon_device *rdev)
 
 void rs600_fini(struct radeon_device *rdev)
 {
+	r600_audio_fini(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -871,6 +879,8 @@ int rs600_init(struct radeon_device *rdev)
 	radeon_scratch_init(rdev);
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* BIOS */
 	if (!radeon_get_bios(rdev)) {
 		if (ASIC_IS_AVIVO(rdev))
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index ce4ecbe1081..3e3f75718be 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -154,13 +154,13 @@ void rs690_mc_init(struct radeon_device *rdev)
 	rdev->mc.vram_width = 128;
 	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	rdev->mc.visible_vram_size = rdev->mc.aper_size;
 	base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
 	base = G_000100_MC_FB_START(base) << 16;
-	rs690_pm_info(rdev);
 	rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+	rs690_pm_info(rdev);
 	radeon_vram_location(rdev, &rdev->mc, base);
 	rdev->mc.gtt_base_align = rdev->mc.gtt_size - 1;
 	radeon_gtt_location(rdev, &rdev->mc);
@@ -398,7 +398,9 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 	struct drm_display_mode *mode1 = NULL;
 	struct rs690_watermark wm0;
 	struct rs690_watermark wm1;
-	u32 tmp, d1mode_priority_a_cnt, d2mode_priority_a_cnt;
+	u32 tmp;
+	u32 d1mode_priority_a_cnt = S_006548_D1MODE_PRIORITY_A_OFF(1);
+	u32 d2mode_priority_a_cnt = S_006548_D1MODE_PRIORITY_A_OFF(1);
 	fixed20_12 priority_mark02, priority_mark12, fill_rate;
 	fixed20_12 a, b;
 
@@ -495,10 +497,6 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 			d1mode_priority_a_cnt |= S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(1);
 			d2mode_priority_a_cnt |= S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(1);
 		}
-		WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
-		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
-		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
-		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 	} else if (mode0) {
 		if (dfixed_trunc(wm0.dbpp) > 64)
 			a.full = dfixed_mul(wm0.dbpp, wm0.num_line_pair);
@@ -528,13 +526,7 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 		d1mode_priority_a_cnt = dfixed_trunc(priority_mark02);
 		if (rdev->disp_priority == 2)
 			d1mode_priority_a_cnt |= S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(1);
-		WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
-		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
-		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT,
-			S_006D48_D2MODE_PRIORITY_A_OFF(1));
-		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT,
-			S_006D4C_D2MODE_PRIORITY_B_OFF(1));
-	} else {
+	} else if (mode1) {
 		if (dfixed_trunc(wm1.dbpp) > 64)
 			a.full = dfixed_mul(wm1.dbpp, wm1.num_line_pair);
 		else
@@ -563,13 +555,12 @@ void rs690_bandwidth_update(struct radeon_device *rdev)
 		d2mode_priority_a_cnt = dfixed_trunc(priority_mark12);
 		if (rdev->disp_priority == 2)
 			d2mode_priority_a_cnt |= S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(1);
-		WREG32(R_006548_D1MODE_PRIORITY_A_CNT,
-			S_006548_D1MODE_PRIORITY_A_OFF(1));
-		WREG32(R_00654C_D1MODE_PRIORITY_B_CNT,
-			S_00654C_D1MODE_PRIORITY_B_OFF(1));
-		WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
-		WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 	}
+
+	WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+	WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
+	WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+	WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 }
 
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg)
@@ -641,6 +632,13 @@ static int rs690_startup(struct radeon_device *rdev)
 		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
 		return r;
 	}
+
+	r = r600_audio_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failed initializing audio\n");
+		return r;
+	}
+
 	return 0;
 }
 
@@ -667,6 +665,7 @@ int rs690_resume(struct radeon_device *rdev)
 
 int rs690_suspend(struct radeon_device *rdev)
 {
+	r600_audio_fini(rdev);
 	r100_cp_disable(rdev);
 	r100_wb_disable(rdev);
 	rs600_irq_disable(rdev);
@@ -676,6 +675,7 @@ int rs690_suspend(struct radeon_device *rdev)
 
 void rs690_fini(struct radeon_device *rdev)
 {
+	r600_audio_fini(rdev);
 	r100_cp_fini(rdev);
 	r100_wb_fini(rdev);
 	r100_ib_fini(rdev);
@@ -699,6 +699,8 @@ int rs690_init(struct radeon_device *rdev)
 	radeon_scratch_init(rdev);
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* TODO: disable VGA need to use VGA request */
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 0c9c169a685..4d6e86041a9 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -469,6 +469,8 @@ int rv515_init(struct radeon_device *rdev)
 	/* Initialize surface registers */
 	radeon_surface_init(rdev);
 	/* TODO: disable VGA need to use VGA request */
+	/* restore some register to sane defaults */
+	r100_restore_sanity(rdev);
 	/* BIOS*/
 	if (!radeon_get_bios(rdev)) {
 		if (ASIC_IS_AVIVO(rdev))
@@ -925,7 +927,9 @@ void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
 	struct drm_display_mode *mode1 = NULL;
 	struct rv515_watermark wm0;
 	struct rv515_watermark wm1;
-	u32 tmp, d1mode_priority_a_cnt, d2mode_priority_a_cnt;
+	u32 tmp;
+	u32 d1mode_priority_a_cnt = MODE_PRIORITY_OFF;
+	u32 d2mode_priority_a_cnt = MODE_PRIORITY_OFF;
 	fixed20_12 priority_mark02, priority_mark12, fill_rate;
 	fixed20_12 a, b;
 
@@ -999,10 +1003,6 @@ void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
 			d1mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
 			d2mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
 		}
-		WREG32(D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
-		WREG32(D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
-		WREG32(D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
-		WREG32(D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 	} else if (mode0) {
 		if (dfixed_trunc(wm0.dbpp) > 64)
 			a.full = dfixed_div(wm0.dbpp, wm0.num_line_pair);
@@ -1032,11 +1032,7 @@ void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
 		d1mode_priority_a_cnt = dfixed_trunc(priority_mark02);
 		if (rdev->disp_priority == 2)
 			d1mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
-		WREG32(D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
-		WREG32(D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
-		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
-		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
-	} else {
+	} else if (mode1) {
 		if (dfixed_trunc(wm1.dbpp) > 64)
 			a.full = dfixed_div(wm1.dbpp, wm1.num_line_pair);
 		else
@@ -1065,11 +1061,12 @@ void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
 		d2mode_priority_a_cnt = dfixed_trunc(priority_mark12);
 		if (rdev->disp_priority == 2)
 			d2mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
-		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
-		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
-		WREG32(D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
-		WREG32(D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 	}
+
+	WREG32(D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+	WREG32(D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
+	WREG32(D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+	WREG32(D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
 }
 
 void rv515_bandwidth_update(struct radeon_device *rdev)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b7fd8206492..f1c79681011 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -42,6 +42,21 @@
 static void rv770_gpu_init(struct radeon_device *rdev);
 void rv770_fini(struct radeon_device *rdev);
 
+/* get temperature in millidegrees */
+u32 rv770_get_temp(struct radeon_device *rdev)
+{
+	u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
+		ASIC_T_SHIFT;
+	u32 actual_temp = 0;
+
+	if ((temp >> 9) & 1)
+		actual_temp = 0;
+	else
+		actual_temp = (temp >> 1) & 0xff;
+
+	return actual_temp * 1000;
+}
+
 void rv770_pm_misc(struct radeon_device *rdev)
 {
 	int req_ps_idx = rdev->pm.requested_power_state_index;
@@ -189,7 +204,10 @@ static void rv770_mc_program(struct radeon_device *rdev)
 		WREG32((0x2c20 + j), 0x00000000);
 		WREG32((0x2c24 + j), 0x00000000);
 	}
-	WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0);
+	/* r7xx hw bug.  Read from HDP_DEBUG1 rather
+	 * than writing to HDP_REG_COHERENCY_FLUSH_CNTL
+	 */
+	tmp = RREG32(HDP_DEBUG1);
 
 	rv515_mc_stop(rdev, &save);
 	if (r600_mc_wait_for_idle(rdev)) {
@@ -659,8 +677,9 @@ static void rv770_gpu_init(struct radeon_device *rdev)
 								 r600_count_pipe_bits((cc_rb_backend_disable &
 										       R7XX_MAX_BACKENDS_MASK) >> 16)),
 								(cc_rb_backend_disable >> 16));
-	gb_tiling_config |= BACKEND_MAP(backend_map);
 
+	rdev->config.rv770.tile_config = gb_tiling_config;
+	gb_tiling_config |= BACKEND_MAP(backend_map);
 
 	WREG32(GB_TILING_CONFIG, gb_tiling_config);
 	WREG32(DCP_TILING_CONFIG, (gb_tiling_config & 0xffff));
@@ -919,8 +938,8 @@ int rv770_mc_init(struct radeon_device *rdev)
 	}
 	rdev->mc.vram_width = numchan * chansize;
 	/* Could aper size report 0 ? */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0);
+	rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0);
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index 9506f8cb99e..b7a5a20e81d 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -122,12 +122,18 @@
 #define		GUI_ACTIVE					(1<<31)
 #define	GRBM_STATUS2					0x8014
 
+#define	CG_MULT_THERMAL_STATUS				0x740
+#define		ASIC_T(x)			        ((x) << 16)
+#define		ASIC_T_MASK			        0x3FF0000
+#define		ASIC_T_SHIFT			        16
+
 #define	HDP_HOST_PATH_CNTL				0x2C00
 #define	HDP_NONSURFACE_BASE				0x2C04
 #define	HDP_NONSURFACE_INFO				0x2C08
 #define	HDP_NONSURFACE_SIZE				0x2C0C
 #define HDP_REG_COHERENCY_FLUSH_CNTL			0x54A0
 #define	HDP_TILING_CONFIG				0x2F3C
+#define HDP_DEBUG1                                      0x2F34
 
 #define MC_SHARED_CHMAP						0x2004
 #define		NOOFCHAN_SHIFT					12
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index fa05cda8c98..976dc8d2528 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -573,13 +573,13 @@ int savage_driver_firstopen(struct drm_device *dev)
 	dev_priv->mtrr[2].handle = -1;
 	if (S3_SAVAGE3D_SERIES(dev_priv->chipset)) {
 		fb_rsrc = 0;
-		fb_base = drm_get_resource_start(dev, 0);
+		fb_base = pci_resource_start(dev->pdev, 0);
 		fb_size = SAVAGE_FB_SIZE_S3;
 		mmio_base = fb_base + SAVAGE_FB_SIZE_S3;
 		aper_rsrc = 0;
 		aperture_base = fb_base + SAVAGE_APERTURE_OFFSET;
 		/* this should always be true */
-		if (drm_get_resource_len(dev, 0) == 0x08000000) {
+		if (pci_resource_len(dev->pdev, 0) == 0x08000000) {
 			/* Don't make MMIO write-cobining! We need 3
 			 * MTRRs. */
 			dev_priv->mtrr[0].base = fb_base;
@@ -599,18 +599,19 @@ int savage_driver_firstopen(struct drm_device *dev)
 					 dev_priv->mtrr[2].size, DRM_MTRR_WC);
 		} else {
 			DRM_ERROR("strange pci_resource_len %08llx\n",
-				  (unsigned long long)drm_get_resource_len(dev, 0));
+				  (unsigned long long)
+				  pci_resource_len(dev->pdev, 0));
 		}
 	} else if (dev_priv->chipset != S3_SUPERSAVAGE &&
 		   dev_priv->chipset != S3_SAVAGE2000) {
-		mmio_base = drm_get_resource_start(dev, 0);
+		mmio_base = pci_resource_start(dev->pdev, 0);
 		fb_rsrc = 1;
-		fb_base = drm_get_resource_start(dev, 1);
+		fb_base = pci_resource_start(dev->pdev, 1);
 		fb_size = SAVAGE_FB_SIZE_S4;
 		aper_rsrc = 1;
 		aperture_base = fb_base + SAVAGE_APERTURE_OFFSET;
 		/* this should always be true */
-		if (drm_get_resource_len(dev, 1) == 0x08000000) {
+		if (pci_resource_len(dev->pdev, 1) == 0x08000000) {
 			/* Can use one MTRR to cover both fb and
 			 * aperture. */
 			dev_priv->mtrr[0].base = fb_base;
@@ -620,15 +621,16 @@ int savage_driver_firstopen(struct drm_device *dev)
 					 dev_priv->mtrr[0].size, DRM_MTRR_WC);
 		} else {
 			DRM_ERROR("strange pci_resource_len %08llx\n",
-				  (unsigned long long)drm_get_resource_len(dev, 1));
+				  (unsigned long long)
+				  pci_resource_len(dev->pdev, 1));
 		}
 	} else {
-		mmio_base = drm_get_resource_start(dev, 0);
+		mmio_base = pci_resource_start(dev->pdev, 0);
 		fb_rsrc = 1;
-		fb_base = drm_get_resource_start(dev, 1);
-		fb_size = drm_get_resource_len(dev, 1);
+		fb_base = pci_resource_start(dev->pdev, 1);
+		fb_size = pci_resource_len(dev->pdev, 1);
 		aper_rsrc = 2;
-		aperture_base = drm_get_resource_start(dev, 2);
+		aperture_base = pci_resource_start(dev->pdev, 2);
 		/* Automatic MTRR setup will do the right thing. */
 	}
 
diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c
index 4fd1f067d38..776bf9e9ea1 100644
--- a/drivers/gpu/drm/sis/sis_drv.c
+++ b/drivers/gpu/drm/sis/sis_drv.c
@@ -47,9 +47,8 @@ static int sis_driver_load(struct drm_device *dev, unsigned long chipset)
 	dev->dev_private = (void *)dev_priv;
 	dev_priv->chipset = chipset;
 	ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
-	if (ret) {
+	if (ret)
 		kfree(dev_priv);
-	}
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/sis/sis_mm.c b/drivers/gpu/drm/sis/sis_mm.c
index af22111397d..07d0f2979ca 100644
--- a/drivers/gpu/drm/sis/sis_mm.c
+++ b/drivers/gpu/drm/sis/sis_mm.c
@@ -78,7 +78,7 @@ static unsigned long sis_sman_mm_offset(void *private, void *ref)
 #else /* CONFIG_FB_SIS[_MODULE] */
 
 #define SIS_MM_ALIGN_SHIFT 4
-#define SIS_MM_ALIGN_MASK ( (1 << SIS_MM_ALIGN_SHIFT) - 1)
+#define SIS_MM_ALIGN_MASK ((1 << SIS_MM_ALIGN_SHIFT) - 1)
 
 #endif /* CONFIG_FB_SIS[_MODULE] */
 
@@ -225,9 +225,8 @@ static drm_local_map_t *sis_reg_init(struct drm_device *dev)
 		map = entry->map;
 		if (!map)
 			continue;
-		if (map->type == _DRM_REGISTERS) {
+		if (map->type == _DRM_REGISTERS)
 			return map;
-		}
 	}
 	return NULL;
 }
@@ -264,10 +263,10 @@ int sis_idle(struct drm_device *dev)
 
 	end = jiffies + (DRM_HZ * 3);
 
-	for (i=0; i<4; ++i) {
+	for (i = 0; i < 4; ++i) {
 		do {
 			idle_reg = SIS_READ(0x85cc);
-		} while ( !time_after_eq(jiffies, end) &&
+		} while (!time_after_eq(jiffies, end) &&
 			  ((idle_reg & 0x80000000) != 0x80000000));
 	}
 
@@ -301,7 +300,7 @@ void sis_lastclose(struct drm_device *dev)
 	mutex_unlock(&dev->struct_mutex);
 }
 
-void sis_reclaim_buffers_locked(struct drm_device * dev,
+void sis_reclaim_buffers_locked(struct drm_device *dev,
 				struct drm_file *file_priv)
 {
 	drm_sis_private_t *dev_priv = dev->dev_private;
@@ -312,9 +311,8 @@ void sis_reclaim_buffers_locked(struct drm_device * dev,
 		return;
 	}
 
-	if (dev->driver->dma_quiescent) {
+	if (dev->driver->dma_quiescent)
 		dev->driver->dma_quiescent(dev);
-	}
 
 	drm_sman_owner_cleanup(&dev_priv->sman, (unsigned long)file_priv);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/ttm/Makefile b/drivers/gpu/drm/ttm/Makefile
index 4256e200647..b256d4adfaf 100644
--- a/drivers/gpu/drm/ttm/Makefile
+++ b/drivers/gpu/drm/ttm/Makefile
@@ -3,7 +3,7 @@
 
 ccflags-y := -Iinclude/drm
 ttm-y := ttm_agp_backend.o ttm_memory.o ttm_tt.o ttm_bo.o \
-	ttm_bo_util.o ttm_bo_vm.o ttm_module.o ttm_global.o \
+	ttm_bo_util.o ttm_bo_vm.o ttm_module.o \
 	ttm_object.o ttm_lock.o ttm_execbuf_util.o ttm_page_alloc.o
 
 obj-$(CONFIG_DRM_TTM) += ttm.o
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 555ebb12ace..cb4cf7ef4d1 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -476,7 +476,6 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all)
 			++put_count;
 		}
 		if (bo->mem.mm_node) {
-			bo->mem.mm_node->private = NULL;
 			drm_mm_put_block(bo->mem.mm_node);
 			bo->mem.mm_node = NULL;
 		}
@@ -670,7 +669,6 @@ static int ttm_bo_evict(struct ttm_buffer_object *bo, bool interruptible,
 			printk(KERN_ERR TTM_PFX "Buffer eviction failed\n");
 		spin_lock(&glob->lru_lock);
 		if (evict_mem.mm_node) {
-			evict_mem.mm_node->private = NULL;
 			drm_mm_put_block(evict_mem.mm_node);
 			evict_mem.mm_node = NULL;
 		}
@@ -929,8 +927,6 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 		mem->mm_node = node;
 		mem->mem_type = mem_type;
 		mem->placement = cur_flags;
-		if (node)
-			node->private = bo;
 		return 0;
 	}
 
@@ -973,7 +969,6 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 						interruptible, no_wait_reserve, no_wait_gpu);
 		if (ret == 0 && mem->mm_node) {
 			mem->placement = cur_flags;
-			mem->mm_node->private = bo;
 			return 0;
 		}
 		if (ret == -ERESTARTSYS)
@@ -1029,7 +1024,6 @@ int ttm_bo_move_buffer(struct ttm_buffer_object *bo,
 out_unlock:
 	if (ret && mem.mm_node) {
 		spin_lock(&glob->lru_lock);
-		mem.mm_node->private = NULL;
 		drm_mm_put_block(mem.mm_node);
 		spin_unlock(&glob->lru_lock);
 	}
@@ -1401,7 +1395,7 @@ static void ttm_bo_global_kobj_release(struct kobject *kobj)
 	kfree(glob);
 }
 
-void ttm_bo_global_release(struct ttm_global_reference *ref)
+void ttm_bo_global_release(struct drm_global_reference *ref)
 {
 	struct ttm_bo_global *glob = ref->object;
 
@@ -1410,7 +1404,7 @@ void ttm_bo_global_release(struct ttm_global_reference *ref)
 }
 EXPORT_SYMBOL(ttm_bo_global_release);
 
-int ttm_bo_global_init(struct ttm_global_reference *ref)
+int ttm_bo_global_init(struct drm_global_reference *ref)
 {
 	struct ttm_bo_global_ref *bo_ref =
 		container_of(ref, struct ttm_bo_global_ref, ref);
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 13012a1f148..7cffb3e0423 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -353,8 +353,6 @@ static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
 	fbo->vm_node = NULL;
 
 	fbo->sync_obj = driver->sync_obj_ref(bo->sync_obj);
-	if (fbo->mem.mm_node)
-		fbo->mem.mm_node->private = (void *)fbo;
 	kref_init(&fbo->list_kref);
 	kref_init(&fbo->kref);
 	fbo->destroy = &ttm_transfered_destroy;
diff --git a/drivers/gpu/drm/ttm/ttm_module.c b/drivers/gpu/drm/ttm/ttm_module.c
index 9a6edbfeaa9..902d7cf9fb4 100644
--- a/drivers/gpu/drm/ttm/ttm_module.c
+++ b/drivers/gpu/drm/ttm/ttm_module.c
@@ -70,8 +70,6 @@ static int __init ttm_init(void)
 	if (unlikely(ret != 0))
 		return ret;
 
-	ttm_global_init();
-
 	atomic_set(&device_released, 0);
 	ret = drm_class_device_register(&ttm_drm_class_device);
 	if (unlikely(ret != 0))
@@ -81,7 +79,6 @@ static int __init ttm_init(void)
 out_no_dev_reg:
 	atomic_set(&device_released, 1);
 	wake_up_all(&exit_q);
-	ttm_global_release();
 	return ret;
 }
 
@@ -95,7 +92,6 @@ static void __exit ttm_exit(void)
 	 */
 
 	wait_event(exit_q, atomic_read(&device_released) == 1);
-	ttm_global_release();
 }
 
 module_init(ttm_init);
diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c
index bfb92d28326..68dda74a50a 100644
--- a/drivers/gpu/drm/via/via_dma.c
+++ b/drivers/gpu/drm/via/via_dma.c
@@ -58,28 +58,29 @@
 	*((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1;	\
 	*((uint32_t *)(vb) + 1) = (nData);			\
 	vb = ((uint32_t *)vb) + 2;				\
-	dev_priv->dma_low +=8;					\
+	dev_priv->dma_low += 8;					\
 }
 
 #define via_flush_write_combine() DRM_MEMORYBARRIER()
 
-#define VIA_OUT_RING_QW(w1,w2)			\
+#define VIA_OUT_RING_QW(w1, w2)	do {		\
 	*vb++ = (w1);				\
 	*vb++ = (w2);				\
-	dev_priv->dma_low += 8;
+	dev_priv->dma_low += 8;			\
+} while (0)
 
-static void via_cmdbuf_start(drm_via_private_t * dev_priv);
-static void via_cmdbuf_pause(drm_via_private_t * dev_priv);
-static void via_cmdbuf_reset(drm_via_private_t * dev_priv);
-static void via_cmdbuf_rewind(drm_via_private_t * dev_priv);
-static int via_wait_idle(drm_via_private_t * dev_priv);
-static void via_pad_cache(drm_via_private_t * dev_priv, int qwords);
+static void via_cmdbuf_start(drm_via_private_t *dev_priv);
+static void via_cmdbuf_pause(drm_via_private_t *dev_priv);
+static void via_cmdbuf_reset(drm_via_private_t *dev_priv);
+static void via_cmdbuf_rewind(drm_via_private_t *dev_priv);
+static int via_wait_idle(drm_via_private_t *dev_priv);
+static void via_pad_cache(drm_via_private_t *dev_priv, int qwords);
 
 /*
  * Free space in command buffer.
  */
 
-static uint32_t via_cmdbuf_space(drm_via_private_t * dev_priv)
+static uint32_t via_cmdbuf_space(drm_via_private_t *dev_priv)
 {
 	uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
 	uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base;
@@ -93,7 +94,7 @@ static uint32_t via_cmdbuf_space(drm_via_private_t * dev_priv)
  * How much does the command regulator lag behind?
  */
 
-static uint32_t via_cmdbuf_lag(drm_via_private_t * dev_priv)
+static uint32_t via_cmdbuf_lag(drm_via_private_t *dev_priv)
 {
 	uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
 	uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base;
@@ -108,7 +109,7 @@ static uint32_t via_cmdbuf_lag(drm_via_private_t * dev_priv)
  */
 
 static inline int
-via_cmdbuf_wait(drm_via_private_t * dev_priv, unsigned int size)
+via_cmdbuf_wait(drm_via_private_t *dev_priv, unsigned int size)
 {
 	uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr;
 	uint32_t cur_addr, hw_addr, next_addr;
@@ -146,14 +147,13 @@ static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv,
 	    dev_priv->dma_high) {
 		via_cmdbuf_rewind(dev_priv);
 	}
-	if (via_cmdbuf_wait(dev_priv, size) != 0) {
+	if (via_cmdbuf_wait(dev_priv, size) != 0)
 		return NULL;
-	}
 
 	return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low);
 }
 
-int via_dma_cleanup(struct drm_device * dev)
+int via_dma_cleanup(struct drm_device *dev)
 {
 	if (dev->dev_private) {
 		drm_via_private_t *dev_priv =
@@ -171,9 +171,9 @@ int via_dma_cleanup(struct drm_device * dev)
 	return 0;
 }
 
-static int via_initialize(struct drm_device * dev,
-			  drm_via_private_t * dev_priv,
-			  drm_via_dma_init_t * init)
+static int via_initialize(struct drm_device *dev,
+			  drm_via_private_t *dev_priv,
+			  drm_via_dma_init_t *init)
 {
 	if (!dev_priv || !dev_priv->mmio) {
 		DRM_ERROR("via_dma_init called before via_map_init\n");
@@ -258,7 +258,7 @@ static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *fil
 	return retcode;
 }
 
-static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t * cmd)
+static int via_dispatch_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd)
 {
 	drm_via_private_t *dev_priv;
 	uint32_t *vb;
@@ -271,9 +271,8 @@ static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t *
 		return -EFAULT;
 	}
 
-	if (cmd->size > VIA_PCI_BUF_SIZE) {
+	if (cmd->size > VIA_PCI_BUF_SIZE)
 		return -ENOMEM;
-	}
 
 	if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size))
 		return -EFAULT;
@@ -291,9 +290,8 @@ static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t *
 	}
 
 	vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size);
-	if (vb == NULL) {
+	if (vb == NULL)
 		return -EAGAIN;
-	}
 
 	memcpy(vb, dev_priv->pci_buf, cmd->size);
 
@@ -311,13 +309,12 @@ static int via_dispatch_cmdbuffer(struct drm_device * dev, drm_via_cmdbuffer_t *
 	return 0;
 }
 
-int via_driver_dma_quiescent(struct drm_device * dev)
+int via_driver_dma_quiescent(struct drm_device *dev)
 {
 	drm_via_private_t *dev_priv = dev->dev_private;
 
-	if (!via_wait_idle(dev_priv)) {
+	if (!via_wait_idle(dev_priv))
 		return -EBUSY;
-	}
 	return 0;
 }
 
@@ -339,22 +336,17 @@ static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *fi
 	DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size);
 
 	ret = via_dispatch_cmdbuffer(dev, cmdbuf);
-	if (ret) {
-		return ret;
-	}
-
-	return 0;
+	return ret;
 }
 
-static int via_dispatch_pci_cmdbuffer(struct drm_device * dev,
-				      drm_via_cmdbuffer_t * cmd)
+static int via_dispatch_pci_cmdbuffer(struct drm_device *dev,
+				      drm_via_cmdbuffer_t *cmd)
 {
 	drm_via_private_t *dev_priv = dev->dev_private;
 	int ret;
 
-	if (cmd->size > VIA_PCI_BUF_SIZE) {
+	if (cmd->size > VIA_PCI_BUF_SIZE)
 		return -ENOMEM;
-	}
 	if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size))
 		return -EFAULT;
 
@@ -380,19 +372,14 @@ static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file
 	DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size);
 
 	ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf);
-	if (ret) {
-		return ret;
-	}
-
-	return 0;
+	return ret;
 }
 
-static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
+static inline uint32_t *via_align_buffer(drm_via_private_t *dev_priv,
 					 uint32_t * vb, int qw_count)
 {
-	for (; qw_count > 0; --qw_count) {
+	for (; qw_count > 0; --qw_count)
 		VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY);
-	}
 	return vb;
 }
 
@@ -401,7 +388,7 @@ static inline uint32_t *via_align_buffer(drm_via_private_t * dev_priv,
  *
  * Returns virtual pointer to ring buffer.
  */
-static inline uint32_t *via_get_dma(drm_via_private_t * dev_priv)
+static inline uint32_t *via_get_dma(drm_via_private_t *dev_priv)
 {
 	return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low);
 }
@@ -411,18 +398,18 @@ static inline uint32_t *via_get_dma(drm_via_private_t * dev_priv)
  * modifying the pause address stored in the buffer itself. If
  * the regulator has already paused, restart it.
  */
-static int via_hook_segment(drm_via_private_t * dev_priv,
+static int via_hook_segment(drm_via_private_t *dev_priv,
 			    uint32_t pause_addr_hi, uint32_t pause_addr_lo,
 			    int no_pci_fire)
 {
 	int paused, count;
 	volatile uint32_t *paused_at = dev_priv->last_pause_ptr;
-	uint32_t reader,ptr;
+	uint32_t reader, ptr;
 	uint32_t diff;
 
 	paused = 0;
 	via_flush_write_combine();
-	(void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1);
+	(void) *(volatile uint32_t *)(via_get_dma(dev_priv) - 1);
 
 	*paused_at = pause_addr_lo;
 	via_flush_write_combine();
@@ -435,7 +422,7 @@ static int via_hook_segment(drm_via_private_t * dev_priv,
 	dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1;
 
 	/*
-	 * If there is a possibility that the command reader will 
+	 * If there is a possibility that the command reader will
 	 * miss the new pause address and pause on the old one,
 	 * In that case we need to program the new start address
 	 * using PCI.
@@ -443,9 +430,9 @@ static int via_hook_segment(drm_via_private_t * dev_priv,
 
 	diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
 	count = 10000000;
-	while(diff == 0 && count--) {
+	while (diff == 0 && count--) {
 		paused = (VIA_READ(0x41c) & 0x80000000);
-		if (paused) 
+		if (paused)
 			break;
 		reader = *(dev_priv->hw_addr_ptr);
 		diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff;
@@ -477,7 +464,7 @@ static int via_hook_segment(drm_via_private_t * dev_priv,
 	return paused;
 }
 
-static int via_wait_idle(drm_via_private_t * dev_priv)
+static int via_wait_idle(drm_via_private_t *dev_priv)
 {
 	int count = 10000000;
 
@@ -491,9 +478,9 @@ static int via_wait_idle(drm_via_private_t * dev_priv)
 	return count;
 }
 
-static uint32_t *via_align_cmd(drm_via_private_t * dev_priv, uint32_t cmd_type,
-			       uint32_t addr, uint32_t * cmd_addr_hi,
-			       uint32_t * cmd_addr_lo, int skip_wait)
+static uint32_t *via_align_cmd(drm_via_private_t *dev_priv, uint32_t cmd_type,
+			       uint32_t addr, uint32_t *cmd_addr_hi,
+			       uint32_t *cmd_addr_lo, int skip_wait)
 {
 	uint32_t agp_base;
 	uint32_t cmd_addr, addr_lo, addr_hi;
@@ -521,7 +508,7 @@ static uint32_t *via_align_cmd(drm_via_private_t * dev_priv, uint32_t cmd_type,
 	return vb;
 }
 
-static void via_cmdbuf_start(drm_via_private_t * dev_priv)
+static void via_cmdbuf_start(drm_via_private_t *dev_priv)
 {
 	uint32_t pause_addr_lo, pause_addr_hi;
 	uint32_t start_addr, start_addr_lo;
@@ -580,7 +567,7 @@ static void via_cmdbuf_start(drm_via_private_t * dev_priv)
 	dev_priv->dma_diff = ptr - reader;
 }
 
-static void via_pad_cache(drm_via_private_t * dev_priv, int qwords)
+static void via_pad_cache(drm_via_private_t *dev_priv, int qwords)
 {
 	uint32_t *vb;
 
@@ -590,7 +577,7 @@ static void via_pad_cache(drm_via_private_t * dev_priv, int qwords)
 	via_align_buffer(dev_priv, vb, qwords);
 }
 
-static inline void via_dummy_bitblt(drm_via_private_t * dev_priv)
+static inline void via_dummy_bitblt(drm_via_private_t *dev_priv)
 {
 	uint32_t *vb = via_get_dma(dev_priv);
 	SetReg2DAGP(0x0C, (0 | (0 << 16)));
@@ -598,7 +585,7 @@ static inline void via_dummy_bitblt(drm_via_private_t * dev_priv)
 	SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000);
 }
 
-static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
+static void via_cmdbuf_jump(drm_via_private_t *dev_priv)
 {
 	uint32_t agp_base;
 	uint32_t pause_addr_lo, pause_addr_hi;
@@ -617,9 +604,8 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
 	 */
 
 	dev_priv->dma_low = 0;
-	if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) {
+	if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0)
 		DRM_ERROR("via_cmdbuf_jump failed\n");
-	}
 
 	via_dummy_bitblt(dev_priv);
 	via_dummy_bitblt(dev_priv);
@@ -657,12 +643,12 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv)
 }
 
 
-static void via_cmdbuf_rewind(drm_via_private_t * dev_priv)
+static void via_cmdbuf_rewind(drm_via_private_t *dev_priv)
 {
 	via_cmdbuf_jump(dev_priv);
 }
 
-static void via_cmdbuf_flush(drm_via_private_t * dev_priv, uint32_t cmd_type)
+static void via_cmdbuf_flush(drm_via_private_t *dev_priv, uint32_t cmd_type)
 {
 	uint32_t pause_addr_lo, pause_addr_hi;
 
@@ -670,12 +656,12 @@ static void via_cmdbuf_flush(drm_via_private_t * dev_priv, uint32_t cmd_type)
 	via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0);
 }
 
-static void via_cmdbuf_pause(drm_via_private_t * dev_priv)
+static void via_cmdbuf_pause(drm_via_private_t *dev_priv)
 {
 	via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE);
 }
 
-static void via_cmdbuf_reset(drm_via_private_t * dev_priv)
+static void via_cmdbuf_reset(drm_via_private_t *dev_priv)
 {
 	via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP);
 	via_wait_idle(dev_priv);
@@ -708,9 +694,8 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *
 	case VIA_CMDBUF_SPACE:
 		while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
 		       && --count) {
-			if (!d_siz->wait) {
+			if (!d_siz->wait)
 				break;
-			}
 		}
 		if (!count) {
 			DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n");
@@ -720,9 +705,8 @@ static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *
 	case VIA_CMDBUF_LAG:
 		while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
 		       && --count) {
-			if (!d_siz->wait) {
+			if (!d_siz->wait)
 				break;
-			}
 		}
 		if (!count) {
 			DRM_ERROR("VIA_CMDBUF_LAG timed out.\n");
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index 4c54f043068..9b5b4d9dd62 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -70,7 +70,7 @@ via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 		descriptor_this_page;
 	dma_addr_t next = vsg->chain_start;
 
-	while(num_desc--) {
+	while (num_desc--) {
 		if (descriptor_this_page-- == 0) {
 			cur_descriptor_page--;
 			descriptor_this_page = vsg->descriptors_per_page - 1;
@@ -174,19 +174,19 @@ via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 	struct page *page;
 	int i;
 
-	switch(vsg->state) {
+	switch (vsg->state) {
 	case dr_via_device_mapped:
 		via_unmap_blit_from_device(pdev, vsg);
 	case dr_via_desc_pages_alloc:
-		for (i=0; i<vsg->num_desc_pages; ++i) {
+		for (i = 0; i < vsg->num_desc_pages; ++i) {
 			if (vsg->desc_pages[i] != NULL)
-			  free_page((unsigned long)vsg->desc_pages[i]);
+				free_page((unsigned long)vsg->desc_pages[i]);
 		}
 		kfree(vsg->desc_pages);
 	case dr_via_pages_locked:
-		for (i=0; i<vsg->num_pages; ++i) {
-			if ( NULL != (page = vsg->pages[i])) {
-				if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
+		for (i = 0; i < vsg->num_pages; ++i) {
+			if (NULL != (page = vsg->pages[i])) {
+				if (!PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
 					SetPageDirty(page);
 				page_cache_release(page);
 			}
@@ -232,7 +232,7 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 {
 	int ret;
 	unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
-	vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) -
+	vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
 		first_pfn + 1;
 
 	if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
@@ -268,7 +268,7 @@ via_alloc_desc_pages(drm_via_sg_info_t *vsg)
 {
 	int i;
 
-	vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t);
+	vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t);
 	vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
 		vsg->descriptors_per_page;
 
@@ -276,7 +276,7 @@ via_alloc_desc_pages(drm_via_sg_info_t *vsg)
 		return -ENOMEM;
 
 	vsg->state = dr_via_desc_pages_alloc;
-	for (i=0; i<vsg->num_desc_pages; ++i) {
+	for (i = 0; i < vsg->num_desc_pages; ++i) {
 		if (NULL == (vsg->desc_pages[i] =
 			     (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
 			return -ENOMEM;
@@ -318,21 +318,20 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
 	drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 	int cur;
 	int done_transfer;
-	unsigned long irqsave=0;
+	unsigned long irqsave = 0;
 	uint32_t status = 0;
 
 	DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
 		  engine, from_irq, (unsigned long) blitq);
 
-	if (from_irq) {
+	if (from_irq)
 		spin_lock(&blitq->blit_lock);
-	} else {
+	else
 		spin_lock_irqsave(&blitq->blit_lock, irqsave);
-	}
 
 	done_transfer = blitq->is_active &&
-	  (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
-	done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE));
+	  ((status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
+	done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE));
 
 	cur = blitq->cur;
 	if (done_transfer) {
@@ -377,18 +376,16 @@ via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
 			if (!timer_pending(&blitq->poll_timer))
 				mod_timer(&blitq->poll_timer, jiffies + 1);
 		} else {
-			if (timer_pending(&blitq->poll_timer)) {
+			if (timer_pending(&blitq->poll_timer))
 				del_timer(&blitq->poll_timer);
-			}
 			via_dmablit_engine_off(dev, engine);
 		}
 	}
 
-	if (from_irq) {
+	if (from_irq)
 		spin_unlock(&blitq->blit_lock);
-	} else {
+	else
 		spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-	}
 }
 
 
@@ -414,10 +411,9 @@ via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_que
 		((blitq->cur_blit_handle - handle) <= (1 << 23));
 
 	if (queue && active) {
-		slot = handle - blitq->done_blit_handle + blitq->cur -1;
-		if (slot >= VIA_NUM_BLIT_SLOTS) {
+		slot = handle - blitq->done_blit_handle + blitq->cur - 1;
+		if (slot >= VIA_NUM_BLIT_SLOTS)
 			slot -= VIA_NUM_BLIT_SLOTS;
-		}
 		*queue = blitq->blit_queue + slot;
 	}
 
@@ -506,12 +502,12 @@ via_dmablit_workqueue(struct work_struct *work)
 	int cur_released;
 
 
-	DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long)
+	DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long)
 		  (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
 
 	spin_lock_irqsave(&blitq->blit_lock, irqsave);
 
-	while(blitq->serviced != blitq->cur) {
+	while (blitq->serviced != blitq->cur) {
 
 		cur_released = blitq->serviced++;
 
@@ -545,13 +541,13 @@ via_dmablit_workqueue(struct work_struct *work)
 void
 via_init_dmablit(struct drm_device *dev)
 {
-	int i,j;
+	int i, j;
 	drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 	drm_via_blitq_t *blitq;
 
 	pci_set_master(dev->pdev);
 
-	for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) {
+	for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) {
 		blitq = dev_priv->blit_queues + i;
 		blitq->dev = dev;
 		blitq->cur_blit_handle = 0;
@@ -564,9 +560,8 @@ via_init_dmablit(struct drm_device *dev)
 		blitq->is_active = 0;
 		blitq->aborting = 0;
 		spin_lock_init(&blitq->blit_lock);
-		for (j=0; j<VIA_NUM_BLIT_SLOTS; ++j) {
+		for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j)
 			DRM_INIT_WAITQUEUE(blitq->blit_queue + j);
-		}
 		DRM_INIT_WAITQUEUE(&blitq->busy_queue);
 		INIT_WORK(&blitq->wq, via_dmablit_workqueue);
 		setup_timer(&blitq->poll_timer, via_dmablit_timer,
@@ -685,18 +680,17 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli
 static int
 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
 {
-	int ret=0;
+	int ret = 0;
 	unsigned long irqsave;
 
 	DRM_DEBUG("Num free is %d\n", blitq->num_free);
 	spin_lock_irqsave(&blitq->blit_lock, irqsave);
-	while(blitq->num_free == 0) {
+	while (blitq->num_free == 0) {
 		spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 
 		DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
-		if (ret) {
+		if (ret)
 			return (-EINTR == ret) ? -EAGAIN : ret;
-		}
 
 		spin_lock_irqsave(&blitq->blit_lock, irqsave);
 	}
@@ -719,7 +713,7 @@ via_dmablit_release_slot(drm_via_blitq_t *blitq)
 	spin_lock_irqsave(&blitq->blit_lock, irqsave);
 	blitq->num_free++;
 	spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
-	DRM_WAKEUP( &blitq->busy_queue );
+	DRM_WAKEUP(&blitq->busy_queue);
 }
 
 /*
@@ -744,9 +738,8 @@ via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
 
 	engine = (xfer->to_fb) ? 0 : 1;
 	blitq = dev_priv->blit_queues + engine;
-	if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) {
+	if (0 != (ret = via_dmablit_grab_slot(blitq, engine)))
 		return ret;
-	}
 	if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
 		via_dmablit_release_slot(blitq);
 		return -ENOMEM;
@@ -780,7 +773,7 @@ via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
  */
 
 int
-via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_priv )
+via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
 	drm_via_blitsync_t *sync = data;
 	int err;
@@ -804,7 +797,7 @@ via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_pri
  */
 
 int
-via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv )
+via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
 	drm_via_dmablit_t *xfer = data;
 	int err;
diff --git a/drivers/gpu/drm/via/via_dmablit.h b/drivers/gpu/drm/via/via_dmablit.h
index 7408a547a03..9b662a327ce 100644
--- a/drivers/gpu/drm/via/via_dmablit.h
+++ b/drivers/gpu/drm/via/via_dmablit.h
@@ -45,12 +45,12 @@ typedef struct _drm_via_sg_info {
 	int num_desc;
 	enum dma_data_direction direction;
 	unsigned char *bounce_buffer;
-        dma_addr_t chain_start;
+	dma_addr_t chain_start;
 	uint32_t free_on_sequence;
-        unsigned int descriptors_per_page;
+	unsigned int descriptors_per_page;
 	int aborted;
 	enum {
-	        dr_via_device_mapped,
+		dr_via_device_mapped,
 		dr_via_desc_pages_alloc,
 		dr_via_pages_locked,
 		dr_via_pages_alloc,
@@ -68,7 +68,7 @@ typedef struct _drm_via_blitq {
 	unsigned num_free;
 	unsigned num_outstanding;
 	unsigned long end;
-        int aborting;
+	int aborting;
 	int is_active;
 	drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS];
 	spinlock_t blit_lock;
diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h
index cafcb844a22..9cf87d91232 100644
--- a/drivers/gpu/drm/via/via_drv.h
+++ b/drivers/gpu/drm/via/via_drv.h
@@ -107,9 +107,9 @@ enum via_family {
 #define VIA_BASE ((dev_priv->mmio))
 
 #define VIA_READ(reg)		DRM_READ32(VIA_BASE, reg)
-#define VIA_WRITE(reg,val)	DRM_WRITE32(VIA_BASE, reg, val)
+#define VIA_WRITE(reg, val)	DRM_WRITE32(VIA_BASE, reg, val)
 #define VIA_READ8(reg)		DRM_READ8(VIA_BASE, reg)
-#define VIA_WRITE8(reg,val)	DRM_WRITE8(VIA_BASE, reg, val)
+#define VIA_WRITE8(reg, val)	DRM_WRITE8(VIA_BASE, reg, val)
 
 extern struct drm_ioctl_desc via_ioctls[];
 extern int via_max_ioctl;
@@ -121,28 +121,28 @@ extern int via_agp_init(struct drm_device *dev, void *data, struct drm_file *fil
 extern int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv);
 extern int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_priv);
 extern int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv);
-extern int via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_priv );
-extern int via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv );
+extern int via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv);
+extern int via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv);
 
 extern int via_driver_load(struct drm_device *dev, unsigned long chipset);
 extern int via_driver_unload(struct drm_device *dev);
 
-extern int via_init_context(struct drm_device * dev, int context);
-extern int via_final_context(struct drm_device * dev, int context);
+extern int via_init_context(struct drm_device *dev, int context);
+extern int via_final_context(struct drm_device *dev, int context);
 
-extern int via_do_cleanup_map(struct drm_device * dev);
+extern int via_do_cleanup_map(struct drm_device *dev);
 extern u32 via_get_vblank_counter(struct drm_device *dev, int crtc);
 extern int via_enable_vblank(struct drm_device *dev, int crtc);
 extern void via_disable_vblank(struct drm_device *dev, int crtc);
 
 extern irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS);
-extern void via_driver_irq_preinstall(struct drm_device * dev);
+extern void via_driver_irq_preinstall(struct drm_device *dev);
 extern int via_driver_irq_postinstall(struct drm_device *dev);
-extern void via_driver_irq_uninstall(struct drm_device * dev);
+extern void via_driver_irq_uninstall(struct drm_device *dev);
 
-extern int via_dma_cleanup(struct drm_device * dev);
+extern int via_dma_cleanup(struct drm_device *dev);
 extern void via_init_command_verifier(void);
-extern int via_driver_dma_quiescent(struct drm_device * dev);
+extern int via_driver_dma_quiescent(struct drm_device *dev);
 extern void via_init_futex(drm_via_private_t *dev_priv);
 extern void via_cleanup_futex(drm_via_private_t *dev_priv);
 extern void via_release_futex(drm_via_private_t *dev_priv, int context);
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index 34079f251cd..d391f48ef87 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -141,11 +141,10 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
 			atomic_inc(&cur_irq->irq_received);
 			DRM_WAKEUP(&cur_irq->irq_queue);
 			handled = 1;
-			if (dev_priv->irq_map[drm_via_irq_dma0_td] == i) {
+			if (dev_priv->irq_map[drm_via_irq_dma0_td] == i)
 				via_dmablit_handler(dev, 0, 1);
-			} else if (dev_priv->irq_map[drm_via_irq_dma1_td] == i) {
+			else if (dev_priv->irq_map[drm_via_irq_dma1_td] == i)
 				via_dmablit_handler(dev, 1, 1);
-			}
 		}
 		cur_irq++;
 	}
@@ -160,7 +159,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
 		return IRQ_NONE;
 }
 
-static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv)
+static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t *dev_priv)
 {
 	u32 status;
 
@@ -207,7 +206,7 @@ void via_disable_vblank(struct drm_device *dev, int crtc)
 }
 
 static int
-via_driver_irq_wait(struct drm_device * dev, unsigned int irq, int force_sequence,
+via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence,
 		    unsigned int *sequence)
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
@@ -260,7 +259,7 @@ via_driver_irq_wait(struct drm_device * dev, unsigned int irq, int force_sequenc
  * drm_dma.h hooks
  */
 
-void via_driver_irq_preinstall(struct drm_device * dev)
+void via_driver_irq_preinstall(struct drm_device *dev)
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	u32 status;
@@ -329,7 +328,7 @@ int via_driver_irq_postinstall(struct drm_device *dev)
 	return 0;
 }
 
-void via_driver_irq_uninstall(struct drm_device * dev)
+void via_driver_irq_uninstall(struct drm_device *dev)
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	u32 status;
diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c
index 6e6f9159163..6cca9a709f7 100644
--- a/drivers/gpu/drm/via/via_map.c
+++ b/drivers/gpu/drm/via/via_map.c
@@ -25,7 +25,7 @@
 #include "via_drm.h"
 #include "via_drv.h"
 
-static int via_do_init_map(struct drm_device * dev, drm_via_init_t * init)
+static int via_do_init_map(struct drm_device *dev, drm_via_init_t *init)
 {
 	drm_via_private_t *dev_priv = dev->dev_private;
 
@@ -68,7 +68,7 @@ static int via_do_init_map(struct drm_device * dev, drm_via_init_t * init)
 	return 0;
 }
 
-int via_do_cleanup_map(struct drm_device * dev)
+int via_do_cleanup_map(struct drm_device *dev)
 {
 	via_dma_cleanup(dev);
 
diff --git a/drivers/gpu/drm/via/via_mm.c b/drivers/gpu/drm/via/via_mm.c
index f694cb5eded..6cc2dadae3e 100644
--- a/drivers/gpu/drm/via/via_mm.c
+++ b/drivers/gpu/drm/via/via_mm.c
@@ -31,7 +31,7 @@
 #include "drm_sman.h"
 
 #define VIA_MM_ALIGN_SHIFT 4
-#define VIA_MM_ALIGN_MASK ( (1 << VIA_MM_ALIGN_SHIFT) - 1)
+#define VIA_MM_ALIGN_MASK ((1 << VIA_MM_ALIGN_SHIFT) - 1)
 
 int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
@@ -172,7 +172,7 @@ int via_mem_free(struct drm_device *dev, void *data, struct drm_file *file_priv)
 }
 
 
-void via_reclaim_buffers_locked(struct drm_device * dev,
+void via_reclaim_buffers_locked(struct drm_device *dev,
 				struct drm_file *file_priv)
 {
 	drm_via_private_t *dev_priv = dev->dev_private;
@@ -183,9 +183,8 @@ void via_reclaim_buffers_locked(struct drm_device * dev,
 		return;
 	}
 
-	if (dev->driver->dma_quiescent) {
+	if (dev->driver->dma_quiescent)
 		dev->driver->dma_quiescent(dev);
-	}
 
 	drm_sman_owner_cleanup(&dev_priv->sman, (unsigned long)file_priv);
 	mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/via/via_verifier.c b/drivers/gpu/drm/via/via_verifier.c
index 46a57919874..48957b856d4 100644
--- a/drivers/gpu/drm/via/via_verifier.c
+++ b/drivers/gpu/drm/via/via_verifier.c
@@ -235,7 +235,7 @@ static hazard_t table2[256];
 static hazard_t table3[256];
 
 static __inline__ int
-eat_words(const uint32_t ** buf, const uint32_t * buf_end, unsigned num_words)
+eat_words(const uint32_t **buf, const uint32_t *buf_end, unsigned num_words)
 {
 	if ((buf_end - *buf) >= num_words) {
 		*buf += num_words;
@@ -252,7 +252,7 @@ eat_words(const uint32_t ** buf, const uint32_t * buf_end, unsigned num_words)
 static __inline__ drm_local_map_t *via_drm_lookup_agp_map(drm_via_state_t *seq,
 						    unsigned long offset,
 						    unsigned long size,
-						    struct drm_device * dev)
+						    struct drm_device *dev)
 {
 	struct drm_map_list *r_list;
 	drm_local_map_t *map = seq->map_cache;
@@ -344,7 +344,7 @@ static __inline__ int finish_current_sequence(drm_via_state_t * cur_seq)
 }
 
 static __inline__ int
-investigate_hazard(uint32_t cmd, hazard_t hz, drm_via_state_t * cur_seq)
+investigate_hazard(uint32_t cmd, hazard_t hz, drm_via_state_t *cur_seq)
 {
 	register uint32_t tmp, *tmp_addr;
 
@@ -518,7 +518,7 @@ investigate_hazard(uint32_t cmd, hazard_t hz, drm_via_state_t * cur_seq)
 
 static __inline__ int
 via_check_prim_list(uint32_t const **buffer, const uint32_t * buf_end,
-		    drm_via_state_t * cur_seq)
+		    drm_via_state_t *cur_seq)
 {
 	drm_via_private_t *dev_priv =
 	    (drm_via_private_t *) cur_seq->dev->dev_private;
@@ -621,8 +621,8 @@ via_check_prim_list(uint32_t const **buffer, const uint32_t * buf_end,
 }
 
 static __inline__ verifier_state_t
-via_check_header2(uint32_t const **buffer, const uint32_t * buf_end,
-		  drm_via_state_t * hc_state)
+via_check_header2(uint32_t const **buffer, const uint32_t *buf_end,
+		  drm_via_state_t *hc_state)
 {
 	uint32_t cmd;
 	int hz_mode;
@@ -706,16 +706,15 @@ via_check_header2(uint32_t const **buffer, const uint32_t * buf_end,
 			return state_error;
 		}
 	}
-	if (hc_state->unfinished && finish_current_sequence(hc_state)) {
+	if (hc_state->unfinished && finish_current_sequence(hc_state))
 		return state_error;
-	}
 	*buffer = buf;
 	return state_command;
 }
 
 static __inline__ verifier_state_t
-via_parse_header2(drm_via_private_t * dev_priv, uint32_t const **buffer,
-		  const uint32_t * buf_end, int *fire_count)
+via_parse_header2(drm_via_private_t *dev_priv, uint32_t const **buffer,
+		  const uint32_t *buf_end, int *fire_count)
 {
 	uint32_t cmd;
 	const uint32_t *buf = *buffer;
@@ -833,8 +832,8 @@ via_check_header1(uint32_t const **buffer, const uint32_t * buf_end)
 }
 
 static __inline__ verifier_state_t
-via_parse_header1(drm_via_private_t * dev_priv, uint32_t const **buffer,
-		  const uint32_t * buf_end)
+via_parse_header1(drm_via_private_t *dev_priv, uint32_t const **buffer,
+		  const uint32_t *buf_end)
 {
 	register uint32_t cmd;
 	const uint32_t *buf = *buffer;
@@ -851,7 +850,7 @@ via_parse_header1(drm_via_private_t * dev_priv, uint32_t const **buffer,
 }
 
 static __inline__ verifier_state_t
-via_check_vheader5(uint32_t const **buffer, const uint32_t * buf_end)
+via_check_vheader5(uint32_t const **buffer, const uint32_t *buf_end)
 {
 	uint32_t data;
 	const uint32_t *buf = *buffer;
@@ -884,8 +883,8 @@ via_check_vheader5(uint32_t const **buffer, const uint32_t * buf_end)
 }
 
 static __inline__ verifier_state_t
-via_parse_vheader5(drm_via_private_t * dev_priv, uint32_t const **buffer,
-		   const uint32_t * buf_end)
+via_parse_vheader5(drm_via_private_t *dev_priv, uint32_t const **buffer,
+		   const uint32_t *buf_end)
 {
 	uint32_t addr, count, i;
 	const uint32_t *buf = *buffer;
@@ -893,9 +892,8 @@ via_parse_vheader5(drm_via_private_t * dev_priv, uint32_t const **buffer,
 	addr = *buf++ & ~VIA_VIDEOMASK;
 	i = count = *buf;
 	buf += 3;
-	while (i--) {
+	while (i--)
 		VIA_WRITE(addr, *buf++);
-	}
 	if (count & 3)
 		buf += 4 - (count & 3);
 	*buffer = buf;
@@ -940,8 +938,8 @@ via_check_vheader6(uint32_t const **buffer, const uint32_t * buf_end)
 }
 
 static __inline__ verifier_state_t
-via_parse_vheader6(drm_via_private_t * dev_priv, uint32_t const **buffer,
-		   const uint32_t * buf_end)
+via_parse_vheader6(drm_via_private_t *dev_priv, uint32_t const **buffer,
+		   const uint32_t *buf_end)
 {
 
 	uint32_t addr, count, i;
@@ -1037,7 +1035,7 @@ via_verify_command_stream(const uint32_t * buf, unsigned int size,
 }
 
 int
-via_parse_command_stream(struct drm_device * dev, const uint32_t * buf,
+via_parse_command_stream(struct drm_device *dev, const uint32_t *buf,
 			 unsigned int size)
 {
 
@@ -1085,9 +1083,8 @@ via_parse_command_stream(struct drm_device * dev, const uint32_t * buf,
 			return -EINVAL;
 		}
 	}
-	if (state == state_error) {
+	if (state == state_error)
 		return -EINVAL;
-	}
 	return 0;
 }
 
@@ -1096,13 +1093,11 @@ setup_hazard_table(hz_init_t init_table[], hazard_t table[], int size)
 {
 	int i;
 
-	for (i = 0; i < 256; ++i) {
+	for (i = 0; i < 256; ++i)
 		table[i] = forbidden_command;
-	}
 
-	for (i = 0; i < size; ++i) {
+	for (i = 0; i < size; ++i)
 		table[init_table[i].code] = init_table[i].hz;
-	}
 }
 
 void via_init_command_verifier(void)
diff --git a/drivers/gpu/drm/via/via_verifier.h b/drivers/gpu/drm/via/via_verifier.h
index d6f8214b69f..26b6d361ab9 100644
--- a/drivers/gpu/drm/via/via_verifier.h
+++ b/drivers/gpu/drm/via/via_verifier.h
@@ -54,8 +54,8 @@ typedef struct {
 	const uint32_t *buf_start;
 } drm_via_state_t;
 
-extern int via_verify_command_stream(const uint32_t * buf, unsigned int size,
-				     struct drm_device * dev, int agp);
+extern int via_verify_command_stream(const uint32_t *buf, unsigned int size,
+				     struct drm_device *dev, int agp);
 extern int via_parse_command_stream(struct drm_device *dev, const uint32_t *buf,
 				    unsigned int size);
 
diff --git a/drivers/gpu/drm/via/via_video.c b/drivers/gpu/drm/via/via_video.c
index 6efac8117c9..675d311f038 100644
--- a/drivers/gpu/drm/via/via_video.c
+++ b/drivers/gpu/drm/via/via_video.c
@@ -29,7 +29,7 @@
 #include "via_drm.h"
 #include "via_drv.h"
 
-void via_init_futex(drm_via_private_t * dev_priv)
+void via_init_futex(drm_via_private_t *dev_priv)
 {
 	unsigned int i;
 
@@ -41,11 +41,11 @@ void via_init_futex(drm_via_private_t * dev_priv)
 	}
 }
 
-void via_cleanup_futex(drm_via_private_t * dev_priv)
+void via_cleanup_futex(drm_via_private_t *dev_priv)
 {
 }
 
-void via_release_futex(drm_via_private_t * dev_priv, int context)
+void via_release_futex(drm_via_private_t *dev_priv, int context)
 {
 	unsigned int i;
 	volatile int *lock;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index b793c8c9acb..9dd395b9021 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -764,7 +764,7 @@ static struct drm_driver driver = {
 
 static int vmw_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	return drm_get_dev(pdev, ent, &driver);
+	return drm_get_pci_dev(pdev, ent, &driver);
 }
 
 static int __init vmwgfx_init(void)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index eaad5209533..429f917b60b 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -164,7 +164,7 @@ struct vmw_vga_topology_state {
 struct vmw_private {
 	struct ttm_bo_device bdev;
 	struct ttm_bo_global_ref bo_global_ref;
-	struct ttm_global_reference mem_global_ref;
+	struct drm_global_reference mem_global_ref;
 
 	struct vmw_fifo_state fifo;
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index b0866f04ec7..870967a97c1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -528,7 +528,7 @@ int vmw_fb_init(struct vmw_private *vmw_priv)
 	 * Dirty & Deferred IO
 	 */
 	par->dirty.x1 = par->dirty.x2 = 0;
-	par->dirty.y1 = par->dirty.y1 = 0;
+	par->dirty.y1 = par->dirty.y2 = 0;
 	par->dirty.active = true;
 	spin_lock_init(&par->dirty.lock);
 	info->fbdefio = &vmw_defio;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
index e3df4adfb4d..83123287c60 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c
@@ -44,29 +44,29 @@ int vmw_mmap(struct file *filp, struct vm_area_struct *vma)
 	return ttm_bo_mmap(filp, vma, &dev_priv->bdev);
 }
 
-static int vmw_ttm_mem_global_init(struct ttm_global_reference *ref)
+static int vmw_ttm_mem_global_init(struct drm_global_reference *ref)
 {
 	DRM_INFO("global init.\n");
 	return ttm_mem_global_init(ref->object);
 }
 
-static void vmw_ttm_mem_global_release(struct ttm_global_reference *ref)
+static void vmw_ttm_mem_global_release(struct drm_global_reference *ref)
 {
 	ttm_mem_global_release(ref->object);
 }
 
 int vmw_ttm_global_init(struct vmw_private *dev_priv)
 {
-	struct ttm_global_reference *global_ref;
+	struct drm_global_reference *global_ref;
 	int ret;
 
 	global_ref = &dev_priv->mem_global_ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_MEM;
+	global_ref->global_type = DRM_GLOBAL_TTM_MEM;
 	global_ref->size = sizeof(struct ttm_mem_global);
 	global_ref->init = &vmw_ttm_mem_global_init;
 	global_ref->release = &vmw_ttm_mem_global_release;
 
-	ret = ttm_global_item_ref(global_ref);
+	ret = drm_global_item_ref(global_ref);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Failed setting up TTM memory accounting.\n");
 		return ret;
@@ -75,11 +75,11 @@ int vmw_ttm_global_init(struct vmw_private *dev_priv)
 	dev_priv->bo_global_ref.mem_glob =
 		dev_priv->mem_global_ref.object;
 	global_ref = &dev_priv->bo_global_ref.ref;
-	global_ref->global_type = TTM_GLOBAL_TTM_BO;
+	global_ref->global_type = DRM_GLOBAL_TTM_BO;
 	global_ref->size = sizeof(struct ttm_bo_global);
 	global_ref->init = &ttm_bo_global_init;
 	global_ref->release = &ttm_bo_global_release;
-		ret = ttm_global_item_ref(global_ref);
+	ret = drm_global_item_ref(global_ref);
 
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Failed setting up TTM buffer objects.\n");
@@ -88,12 +88,12 @@ int vmw_ttm_global_init(struct vmw_private *dev_priv)
 
 	return 0;
 out_no_bo:
-	ttm_global_item_unref(&dev_priv->mem_global_ref);
+	drm_global_item_unref(&dev_priv->mem_global_ref);
 	return ret;
 }
 
 void vmw_ttm_global_release(struct vmw_private *dev_priv)
 {
-	ttm_global_item_unref(&dev_priv->bo_global_ref.ref);
-	ttm_global_item_unref(&dev_priv->mem_global_ref);
+	drm_global_item_unref(&dev_priv->bo_global_ref.ref);
+	drm_global_item_unref(&dev_priv->mem_global_ref);
 }
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e19cf8eb6cc..f3adf18bfa0 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -332,11 +332,11 @@ config SENSORS_F71805F
 	  will be called f71805f.
 
 config SENSORS_F71882FG
-	tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
+	tristate "Fintek F71808E, F71858FG, F71862FG, F71882FG, F71889FG and F8000"
 	depends on EXPERIMENTAL
 	help
-	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+	  If you say yes here you get support for hardware monitoring features
+	  of the Fintek F71808E, F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
 	  F71889FG and F8000 Super-I/O chips.
 
 	  This driver can also be built as a module.  If so, the module
@@ -405,7 +405,14 @@ config SENSORS_CORETEMP
 	help
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU. Most of the family 6 CPUs
-	  are supported. Check documentation/driver for details.
+	  are supported. Check Documentation/hwmon/coretemp for details.
+
+config SENSORS_PKGTEMP
+	tristate "Intel processor package temperature sensor"
+	depends on X86 && PCI && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the package level temperature
+	  sensor inside your CPU. Check documentation/driver for details.
 
 config SENSORS_IBMAEM
 	tristate "IBM Active Energy Manager temperature/power sensors and control"
@@ -446,6 +453,27 @@ config SENSORS_IT87
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
 
+config SENSORS_JZ4740
+	tristate "Ingenic JZ4740 SoC ADC driver"
+	depends on MACH_JZ4740 && MFD_JZ4740_ADC
+	help
+	  If you say yes here you get support for reading adc values from the ADCIN
+	  pin on Ingenic JZ4740 SoC based boards.
+
+	  This driver can also be build as a module. If so, the module will be
+	  called jz4740-hwmon.
+
+config SENSORS_JC42
+	tristate "JEDEC JC42.4 compliant temperature sensors"
+	help
+	  If you say yes here you get support for Jedec JC42.4 compliant
+	  temperature sensors. Support will include, but not be limited to,
+	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called jc42.
+
 config SENSORS_LM63
 	tristate "National Semiconductor LM63 and LM64"
 	depends on I2C
@@ -739,6 +767,21 @@ config SENSORS_SIS5595
 	  This driver can also be built as a module.  If so, the module
 	  will be called sis5595.
 
+config SENSORS_SMM665
+	tristate "Summit Microelectronics SMM665"
+	depends on I2C && EXPERIMENTAL
+	default n
+	help
+	  If you say yes here you get support for the hardware monitoring
+	  features of the Summit Microelectronics SMM665/SMM665B Six-Channel
+	  Active DC Output Controller / Monitor.
+
+	  Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
+	  Support for those chips is untested.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called smm665.
+
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2138ceb1a71..13d913e34db 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
+obj-$(CONFIG_SENSORS_PKGTEMP)	+= pkgtemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
@@ -55,6 +56,8 @@ obj-$(CONFIG_SENSORS_I5K_AMB)	+= i5k_amb.o
 obj-$(CONFIG_SENSORS_IBMAEM)	+= ibmaem.o
 obj-$(CONFIG_SENSORS_IBMPEX)	+= ibmpex.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
+obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
+obj-$(CONFIG_SENSORS_JZ4740)	+= jz4740-hwmon.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
 obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
 obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
@@ -86,6 +89,7 @@ obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
+obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 05344af5073..a92e28a3576 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -480,7 +480,6 @@ exit:
 	return err;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
 static void coretemp_device_remove(unsigned int cpu)
 {
 	struct pdev_entry *p, *n;
@@ -502,10 +501,13 @@ static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb,
 
 	switch (action) {
 	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
 	case CPU_DOWN_FAILED:
+	case CPU_DOWN_FAILED_FROZEN:
 		coretemp_device_add(cpu);
 		break;
 	case CPU_DOWN_PREPARE:
+	case CPU_DOWN_PREPARE_FROZEN:
 		coretemp_device_remove(cpu);
 		break;
 	}
@@ -515,7 +517,6 @@ static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb,
 static struct notifier_block coretemp_cpu_notifier __refdata = {
 	.notifier_call = coretemp_cpu_callback,
 };
-#endif				/* !CONFIG_HOTPLUG_CPU */
 
 static int __init coretemp_init(void)
 {
@@ -537,12 +538,9 @@ static int __init coretemp_init(void)
 		 * sensors. We check this bit only, all the early CPUs
 		 * without thermal sensors will be filtered out.
 		 */
-		if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01)) {
-			err = coretemp_device_add(i);
-			if (err)
-				goto exit_devices_unreg;
-
-		} else {
+		if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01))
+			coretemp_device_add(i);
+		else {
 			printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
 				" has no thermal sensor.\n", c->x86_model);
 		}
@@ -552,21 +550,13 @@ static int __init coretemp_init(void)
 		goto exit_driver_unreg;
 	}
 
-#ifdef CONFIG_HOTPLUG_CPU
 	register_hotcpu_notifier(&coretemp_cpu_notifier);
-#endif
 	return 0;
 
-exit_devices_unreg:
-	mutex_lock(&pdev_list_mutex);
-	list_for_each_entry_safe(p, n, &pdev_list, list) {
-		platform_device_unregister(p->pdev);
-		list_del(&p->list);
-		kfree(p);
-	}
-	mutex_unlock(&pdev_list_mutex);
 exit_driver_unreg:
+#ifndef CONFIG_HOTPLUG_CPU
 	platform_driver_unregister(&coretemp_driver);
+#endif
 exit:
 	return err;
 }
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 537841ef44b..6207120dcd4 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -45,6 +45,7 @@
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71808_ID		0x0901  /* Chipset ID */
 #define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
@@ -96,9 +97,10 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
+enum chips { f71808fg, f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
 
 static const char *f71882fg_names[] = {
+	"f71808fg",
 	"f71858fg",
 	"f71862fg",
 	"f71882fg",
@@ -306,8 +308,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
-/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
+/* In attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
 	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
 	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
 	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
@@ -317,6 +319,22 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 	SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
 	SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
 	SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+};
+
+/* In attr for the f71808fg */
+static struct sensor_device_attribute_2 f71808_in_attr[] = {
+	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+	SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
+	SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
+	SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
+	SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 7),
+	SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 8),
+};
+
+/* Temp attr common to the f71808fg, f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_temp_attr[] = {
 	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1),
 	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 1),
@@ -355,6 +373,10 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 		store_temp_beep, 0, 6),
 	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2),
 	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
+/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 f71862_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 3),
@@ -989,6 +1011,11 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 				data->temp_type[1] = 6;
 				break;
 			}
+		} else if (data->type == f71808fg) {
+			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
+			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
+
 		} else {
 			reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
 			if ((reg2 & 0x03) == 0x01)
@@ -1871,7 +1898,8 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
 
 	val /= 1000;
 
-	if (data->type == f71889fg)
+	if (data->type == f71889fg
+	 || data->type == f71808fg)
 		val = SENSORS_LIMIT(val, -128, 127);
 	else
 		val = SENSORS_LIMIT(val, 0, 127);
@@ -1974,8 +2002,28 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 			/* fall through! */
 		case f71862fg:
 			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_in_temp_attr,
-					ARRAY_SIZE(fxxxx_in_temp_attr));
+					f71862_temp_attr,
+					ARRAY_SIZE(f71862_temp_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					fxxxx_in_attr,
+					ARRAY_SIZE(fxxxx_in_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					fxxxx_temp_attr,
+					ARRAY_SIZE(fxxxx_temp_attr));
+			break;
+		case f71808fg:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71808_in_attr,
+					ARRAY_SIZE(f71808_in_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+			err = f71882fg_create_sysfs_files(pdev,
+					fxxxx_temp_attr,
+					ARRAY_SIZE(fxxxx_temp_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
@@ -2002,6 +2050,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		case f71862fg:
 			err = (data->pwm_enable & 0x15) != 0x15;
 			break;
+		case f71808fg:
 		case f71882fg:
 		case f71889fg:
 			err = 0;
@@ -2047,6 +2096,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 					f8000_auto_pwm_attr,
 					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
+		case f71808fg:
 		case f71889fg:
 			for (i = 0; i < nr_fans; i++) {
 				data->pwm_auto_point_mapping[i] =
@@ -2126,8 +2176,22 @@ static int f71882fg_remove(struct platform_device *pdev)
 			/* fall through! */
 		case f71862fg:
 			f71882fg_remove_sysfs_files(pdev,
-					fxxxx_in_temp_attr,
-					ARRAY_SIZE(fxxxx_in_temp_attr));
+					f71862_temp_attr,
+					ARRAY_SIZE(f71862_temp_attr));
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_in_attr,
+					ARRAY_SIZE(fxxxx_in_attr));
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_temp_attr,
+					ARRAY_SIZE(fxxxx_temp_attr));
+			break;
+		case f71808fg:
+			f71882fg_remove_sysfs_files(pdev,
+					f71808_in_attr,
+					ARRAY_SIZE(f71808_in_attr));
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_temp_attr,
+					ARRAY_SIZE(fxxxx_temp_attr));
 			break;
 		case f8000:
 			f71882fg_remove_sysfs_files(pdev,
@@ -2195,6 +2259,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
 	switch (devid) {
+	case SIO_F71808_ID:
+		sio_data->type = f71808fg;
+		break;
 	case SIO_F71858_ID:
 		sio_data->type = f71858fg;
 		break;
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index be2d131e405..bfd42f18924 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -522,6 +522,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = {
 	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p", HDAPS_BOTH_AXES),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
 	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
+	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T400", HDAPS_BOTH_AXES),
 	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60", HDAPS_BOTH_AXES),
 	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p", HDAPS_BOTH_AXES),
 	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61", HDAPS_BOTH_AXES),
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
new file mode 100644
index 00000000000..340fc78c8dd
--- /dev/null
+++ b/drivers/hwmon/jc42.c
@@ -0,0 +1,593 @@
+/*
+ * jc42.c - driver for Jedec JC42.4 compliant temperature sensors
+ *
+ * Copyright (c) 2010  Ericsson AB.
+ *
+ * Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
+ *
+ * JC42.4 compliant temperature sensors are typically used on memory modules.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
+
+/* JC42 registers. All registers are 16 bit. */
+#define JC42_REG_CAP		0x00
+#define JC42_REG_CONFIG		0x01
+#define JC42_REG_TEMP_UPPER	0x02
+#define JC42_REG_TEMP_LOWER	0x03
+#define JC42_REG_TEMP_CRITICAL	0x04
+#define JC42_REG_TEMP		0x05
+#define JC42_REG_MANID		0x06
+#define JC42_REG_DEVICEID	0x07
+
+/* Status bits in temperature register */
+#define JC42_ALARM_CRIT_BIT	15
+#define JC42_ALARM_MAX_BIT	14
+#define JC42_ALARM_MIN_BIT	13
+
+/* Configuration register defines */
+#define JC42_CFG_CRIT_ONLY	(1 << 2)
+#define JC42_CFG_SHUTDOWN	(1 << 8)
+#define JC42_CFG_HYST_SHIFT	9
+#define JC42_CFG_HYST_MASK	0x03
+
+/* Capabilities */
+#define JC42_CAP_RANGE		(1 << 2)
+
+/* Manufacturer IDs */
+#define ADT_MANID		0x11d4  /* Analog Devices */
+#define MAX_MANID		0x004d  /* Maxim */
+#define IDT_MANID		0x00b3  /* IDT */
+#define MCP_MANID		0x0054  /* Microchip */
+#define NXP_MANID		0x1131  /* NXP Semiconductors */
+#define ONS_MANID		0x1b09  /* ON Semiconductor */
+#define STM_MANID		0x104a  /* ST Microelectronics */
+
+/* Supported chips */
+
+/* Analog Devices */
+#define ADT7408_DEVID		0x0801
+#define ADT7408_DEVID_MASK	0xffff
+
+/* IDT */
+#define TS3000B3_DEVID		0x2903  /* Also matches TSE2002B3 */
+#define TS3000B3_DEVID_MASK	0xffff
+
+/* Maxim */
+#define MAX6604_DEVID		0x3e00
+#define MAX6604_DEVID_MASK	0xffff
+
+/* Microchip */
+#define MCP98242_DEVID		0x2000
+#define MCP98242_DEVID_MASK	0xfffc
+
+#define MCP98243_DEVID		0x2100
+#define MCP98243_DEVID_MASK	0xfffc
+
+#define MCP9843_DEVID		0x0000	/* Also matches mcp9805 */
+#define MCP9843_DEVID_MASK	0xfffe
+
+/* NXP */
+#define SE97_DEVID		0xa200
+#define SE97_DEVID_MASK		0xfffc
+
+#define SE98_DEVID		0xa100
+#define SE98_DEVID_MASK		0xfffc
+
+/* ON Semiconductor */
+#define CAT6095_DEVID		0x0800	/* Also matches CAT34TS02 */
+#define CAT6095_DEVID_MASK	0xffe0
+
+/* ST Microelectronics */
+#define STTS424_DEVID		0x0101
+#define STTS424_DEVID_MASK	0xffff
+
+#define STTS424E_DEVID		0x0000
+#define STTS424E_DEVID_MASK	0xfffe
+
+static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
+
+struct jc42_chips {
+	u16 manid;
+	u16 devid;
+	u16 devid_mask;
+};
+
+static struct jc42_chips jc42_chips[] = {
+	{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
+	{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
+	{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
+	{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
+	{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
+	{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
+	{ NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
+	{ ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
+	{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
+	{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
+	{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
+};
+
+/* Each client has this additional data */
+struct jc42_data {
+	struct device	*hwmon_dev;
+	struct mutex	update_lock;	/* protect register access */
+	bool		extended;	/* true if extended range supported */
+	bool		valid;
+	unsigned long	last_updated;	/* In jiffies */
+	u16		orig_config;	/* original configuration */
+	u16		config;		/* current configuration */
+	u16		temp_input;	/* Temperatures */
+	u16		temp_crit;
+	u16		temp_min;
+	u16		temp_max;
+};
+
+static int jc42_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id);
+static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info);
+static int jc42_remove(struct i2c_client *client);
+static int jc42_read_value(struct i2c_client *client, u8 reg);
+static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value);
+
+static struct jc42_data *jc42_update_device(struct device *dev);
+
+static const struct i2c_device_id jc42_id[] = {
+	{ "adt7408", 0 },
+	{ "cat94ts02", 0 },
+	{ "cat6095", 0 },
+	{ "jc42", 0 },
+	{ "max6604", 0 },
+	{ "mcp9805", 0 },
+	{ "mcp98242", 0 },
+	{ "mcp98243", 0 },
+	{ "mcp9843", 0 },
+	{ "se97", 0 },
+	{ "se97b", 0 },
+	{ "se98", 0 },
+	{ "stts424", 0 },
+	{ "tse2002b3", 0 },
+	{ "ts3000b3", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, jc42_id);
+
+#ifdef CONFIG_PM
+
+static int jc42_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+
+	data->config |= JC42_CFG_SHUTDOWN;
+	jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	return 0;
+}
+
+static int jc42_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+
+	data->config &= ~JC42_CFG_SHUTDOWN;
+	jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	return 0;
+}
+
+static const struct dev_pm_ops jc42_dev_pm_ops = {
+	.suspend = jc42_suspend,
+	.resume = jc42_resume,
+};
+
+#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
+#else
+#define JC42_DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+/* This is the driver that will be inserted */
+static struct i2c_driver jc42_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "jc42",
+		.pm = JC42_DEV_PM_OPS,
+	},
+	.probe		= jc42_probe,
+	.remove		= jc42_remove,
+	.id_table	= jc42_id,
+	.detect		= jc42_detect,
+	.address_list	= normal_i2c,
+};
+
+#define JC42_TEMP_MIN_EXTENDED	(-40000)
+#define JC42_TEMP_MIN		0
+#define JC42_TEMP_MAX		125000
+
+static u16 jc42_temp_to_reg(int temp, bool extended)
+{
+	int ntemp = SENSORS_LIMIT(temp,
+				  extended ? JC42_TEMP_MIN_EXTENDED :
+				  JC42_TEMP_MIN, JC42_TEMP_MAX);
+
+	/* convert from 0.001 to 0.0625 resolution */
+	return (ntemp * 2 / 125) & 0x1fff;
+}
+
+static int jc42_temp_from_reg(s16 reg)
+{
+	reg &= 0x1fff;
+
+	/* sign extend register */
+	if (reg & 0x1000)
+		reg |= 0xf000;
+
+	/* convert from 0.0625 to 0.001 resolution */
+	return reg * 125 / 2;
+}
+
+/* sysfs stuff */
+
+/* read routines for temperature limits */
+#define show(value)	\
+static ssize_t show_##value(struct device *dev,				\
+			    struct device_attribute *attr,		\
+			    char *buf)					\
+{									\
+	struct jc42_data *data = jc42_update_device(dev);		\
+	if (IS_ERR(data))						\
+		return PTR_ERR(data);					\
+	return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value));	\
+}
+
+show(temp_input);
+show(temp_crit);
+show(temp_min);
+show(temp_max);
+
+/* read routines for hysteresis values */
+static ssize_t show_temp_crit_hyst(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct jc42_data *data = jc42_update_device(dev);
+	int temp, hyst;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	temp = jc42_temp_from_reg(data->temp_crit);
+	hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT)
+			       & JC42_CFG_HYST_MASK];
+	return sprintf(buf, "%d\n", temp - hyst);
+}
+
+static ssize_t show_temp_max_hyst(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct jc42_data *data = jc42_update_device(dev);
+	int temp, hyst;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	temp = jc42_temp_from_reg(data->temp_max);
+	hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT)
+			       & JC42_CFG_HYST_MASK];
+	return sprintf(buf, "%d\n", temp - hyst);
+}
+
+/* write routines */
+#define set(value, reg)	\
+static ssize_t set_##value(struct device *dev,				\
+			   struct device_attribute *attr,		\
+			   const char *buf, size_t count)		\
+{									\
+	struct i2c_client *client = to_i2c_client(dev);			\
+	struct jc42_data *data = i2c_get_clientdata(client);		\
+	int err, ret = count;						\
+	long val;							\
+	if (strict_strtol(buf, 10, &val) < 0)				\
+		return -EINVAL;						\
+	mutex_lock(&data->update_lock);					\
+	data->value = jc42_temp_to_reg(val, data->extended);		\
+	err = jc42_write_value(client, reg, data->value);		\
+	if (err < 0)							\
+		ret = err;						\
+	mutex_unlock(&data->update_lock);				\
+	return ret;							\
+}
+
+set(temp_min, JC42_REG_TEMP_LOWER);
+set(temp_max, JC42_REG_TEMP_UPPER);
+set(temp_crit, JC42_REG_TEMP_CRITICAL);
+
+/* JC42.4 compliant chips only support four hysteresis values.
+ * Pick best choice and go from there. */
+static ssize_t set_temp_crit_hyst(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	long val;
+	int diff, hyst;
+	int err;
+	int ret = count;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	diff = jc42_temp_from_reg(data->temp_crit) - val;
+	hyst = 0;
+	if (diff > 0) {
+		if (diff < 2250)
+			hyst = 1;	/* 1.5 degrees C */
+		else if (diff < 4500)
+			hyst = 2;	/* 3.0 degrees C */
+		else
+			hyst = 3;	/* 6.0 degrees C */
+	}
+
+	mutex_lock(&data->update_lock);
+	data->config = (data->config
+			& ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT))
+	  | (hyst << JC42_CFG_HYST_SHIFT);
+	err = jc42_write_value(client, JC42_REG_CONFIG, data->config);
+	if (err < 0)
+		ret = err;
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	u16 bit = to_sensor_dev_attr(attr)->index;
+	struct jc42_data *data = jc42_update_device(dev);
+	u16 val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = data->temp_input;
+	if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY))
+		val = 0;
+	return sprintf(buf, "%u\n", (val >> bit) & 1);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO,
+		   show_temp_input, NULL);
+static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+		   show_temp_crit, set_temp_crit);
+static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+		   show_temp_min, set_temp_min);
+static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+		   show_temp_max, set_temp_max);
+
+static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+		   show_temp_crit_hyst, set_temp_crit_hyst);
+static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
+		   show_temp_max_hyst, NULL);
+
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
+			  JC42_ALARM_CRIT_BIT);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+			  JC42_ALARM_MIN_BIT);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+			  JC42_ALARM_MAX_BIT);
+
+static struct attribute *jc42_attributes[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp1_crit.attr,
+	&dev_attr_temp1_min.attr,
+	&dev_attr_temp1_max.attr,
+	&dev_attr_temp1_crit_hyst.attr,
+	&dev_attr_temp1_max_hyst.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group jc42_group = {
+	.attrs = jc42_attributes,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int jc42_detect(struct i2c_client *new_client,
+		       struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	int i, config, cap, manid, devid;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	cap = jc42_read_value(new_client, JC42_REG_CAP);
+	config = jc42_read_value(new_client, JC42_REG_CONFIG);
+	manid = jc42_read_value(new_client, JC42_REG_MANID);
+	devid = jc42_read_value(new_client, JC42_REG_DEVICEID);
+
+	if (cap < 0 || config < 0 || manid < 0 || devid < 0)
+		return -ENODEV;
+
+	if ((cap & 0xff00) || (config & 0xf800))
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
+		struct jc42_chips *chip = &jc42_chips[i];
+		if (manid == chip->manid &&
+		    (devid & chip->devid_mask) == chip->devid) {
+			strlcpy(info->type, "jc42", I2C_NAME_SIZE);
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+static int jc42_probe(struct i2c_client *new_client,
+		      const struct i2c_device_id *id)
+{
+	struct jc42_data *data;
+	int config, cap, err;
+
+	data = kzalloc(sizeof(struct jc42_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
+	mutex_init(&data->update_lock);
+
+	cap = jc42_read_value(new_client, JC42_REG_CAP);
+	if (cap < 0) {
+		err = -EINVAL;
+		goto exit_free;
+	}
+	data->extended = !!(cap & JC42_CAP_RANGE);
+
+	config = jc42_read_value(new_client, JC42_REG_CONFIG);
+	if (config < 0) {
+		err = -EINVAL;
+		goto exit_free;
+	}
+	data->orig_config = config;
+	if (config & JC42_CFG_SHUTDOWN) {
+		config &= ~JC42_CFG_SHUTDOWN;
+		jc42_write_value(new_client, JC42_REG_CONFIG, config);
+	}
+	data->config = config;
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&new_client->dev.kobj, &jc42_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&new_client->dev.kobj, &jc42_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int jc42_remove(struct i2c_client *client)
+{
+	struct jc42_data *data = i2c_get_clientdata(client);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &jc42_group);
+	if (data->config != data->orig_config)
+		jc42_write_value(client, JC42_REG_CONFIG, data->orig_config);
+	kfree(data);
+	return 0;
+}
+
+/* All registers are word-sized. */
+static int jc42_read_value(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_word_data(client, reg);
+	if (ret < 0)
+		return ret;
+	return swab16(ret);
+}
+
+static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+	return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static struct jc42_data *jc42_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	struct jc42_data *ret = data;
+	int val;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		val = jc42_read_value(client, JC42_REG_TEMP);
+		if (val < 0) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_input = val;
+
+		val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL);
+		if (val < 0) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_crit = val;
+
+		val = jc42_read_value(client, JC42_REG_TEMP_LOWER);
+		if (val < 0) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_min = val;
+
+		val = jc42_read_value(client, JC42_REG_TEMP_UPPER);
+		if (val < 0) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_max = val;
+
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static int __init sensors_jc42_init(void)
+{
+	return i2c_add_driver(&jc42_driver);
+}
+
+static void __exit sensors_jc42_exit(void)
+{
+	i2c_del_driver(&jc42_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_DESCRIPTION("JC42 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_jc42_init);
+module_exit(sensors_jc42_exit);
diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c
new file mode 100644
index 00000000000..1c8b3d9e205
--- /dev/null
+++ b/drivers/hwmon/jz4740-hwmon.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 SoC HWMON driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/completion.h>
+#include <linux/mfd/core.h>
+
+#include <linux/hwmon.h>
+
+struct jz4740_hwmon {
+	struct resource *mem;
+	void __iomem *base;
+
+	int irq;
+
+	struct mfd_cell *cell;
+	struct device *hwmon;
+
+	struct completion read_completion;
+
+	struct mutex lock;
+};
+
+static ssize_t jz4740_hwmon_show_name(struct device *dev,
+	struct device_attribute *dev_attr, char *buf)
+{
+	return sprintf(buf, "jz4740\n");
+}
+
+static irqreturn_t jz4740_hwmon_irq(int irq, void *data)
+{
+	struct jz4740_hwmon *hwmon = data;
+
+	complete(&hwmon->read_completion);
+	return IRQ_HANDLED;
+}
+
+static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
+	struct device_attribute *dev_attr, char *buf)
+{
+	struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
+	struct completion *completion = &hwmon->read_completion;
+	unsigned long t;
+	unsigned long val;
+	int ret;
+
+	mutex_lock(&hwmon->lock);
+
+	INIT_COMPLETION(*completion);
+
+	enable_irq(hwmon->irq);
+	hwmon->cell->enable(to_platform_device(dev));
+
+	t = wait_for_completion_interruptible_timeout(completion, HZ);
+
+	if (t > 0) {
+		val = readw(hwmon->base) & 0xfff;
+		val = (val * 3300) >> 12;
+		ret = sprintf(buf, "%lu\n", val);
+	} else {
+		ret = t ? t : -ETIMEDOUT;
+	}
+
+	hwmon->cell->disable(to_platform_device(dev));
+	disable_irq(hwmon->irq);
+
+	mutex_unlock(&hwmon->lock);
+
+	return ret;
+}
+
+static DEVICE_ATTR(name, S_IRUGO, jz4740_hwmon_show_name, NULL);
+static DEVICE_ATTR(in0_input, S_IRUGO, jz4740_hwmon_read_adcin, NULL);
+
+static struct attribute *jz4740_hwmon_attributes[] = {
+	&dev_attr_name.attr,
+	&dev_attr_in0_input.attr,
+	NULL
+};
+
+static const struct attribute_group jz4740_hwmon_attr_group = {
+	.attrs = jz4740_hwmon_attributes,
+};
+
+static int __devinit jz4740_hwmon_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_hwmon *hwmon;
+
+	hwmon = kmalloc(sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	hwmon->cell = pdev->dev.platform_data;
+
+	hwmon->irq = platform_get_irq(pdev, 0);
+	if (hwmon->irq < 0) {
+		ret = hwmon->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+		goto err_free;
+	}
+
+	hwmon->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!hwmon->mem) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform mmio resource\n");
+		goto err_free;
+	}
+
+	hwmon->mem = request_mem_region(hwmon->mem->start,
+			resource_size(hwmon->mem), pdev->name);
+	if (!hwmon->mem) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+		goto err_free;
+	}
+
+	hwmon->base = ioremap_nocache(hwmon->mem->start,
+			resource_size(hwmon->mem));
+	if (!hwmon->base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+		goto err_release_mem_region;
+	}
+
+	init_completion(&hwmon->read_completion);
+	mutex_init(&hwmon->lock);
+
+	platform_set_drvdata(pdev, hwmon);
+
+	ret = request_irq(hwmon->irq, jz4740_hwmon_irq, 0, pdev->name, hwmon);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
+		goto err_iounmap;
+	}
+	disable_irq(hwmon->irq);
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create sysfs group: %d\n", ret);
+		goto err_free_irq;
+	}
+
+	hwmon->hwmon = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(hwmon->hwmon)) {
+		ret = PTR_ERR(hwmon->hwmon);
+		goto err_remove_file;
+	}
+
+	return 0;
+
+err_remove_file:
+	sysfs_remove_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
+err_free_irq:
+	free_irq(hwmon->irq, hwmon);
+err_iounmap:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(hwmon->base);
+err_release_mem_region:
+	release_mem_region(hwmon->mem->start, resource_size(hwmon->mem));
+err_free:
+	kfree(hwmon);
+
+	return ret;
+}
+
+static int __devexit jz4740_hwmon_remove(struct platform_device *pdev)
+{
+	struct jz4740_hwmon *hwmon = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(hwmon->hwmon);
+	sysfs_remove_group(&pdev->dev.kobj, &jz4740_hwmon_attr_group);
+
+	free_irq(hwmon->irq, hwmon);
+
+	iounmap(hwmon->base);
+	release_mem_region(hwmon->mem->start, resource_size(hwmon->mem));
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(hwmon);
+
+	return 0;
+}
+
+struct platform_driver jz4740_hwmon_driver = {
+	.probe	= jz4740_hwmon_probe,
+	.remove = __devexit_p(jz4740_hwmon_remove),
+	.driver = {
+		.name = "jz4740-hwmon",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_hwmon_init(void)
+{
+	return platform_driver_register(&jz4740_hwmon_driver);
+}
+module_init(jz4740_hwmon_init);
+
+static void __exit jz4740_hwmon_exit(void)
+{
+	platform_driver_unregister(&jz4740_hwmon_driver);
+}
+module_exit(jz4740_hwmon_exit);
+
+MODULE_DESCRIPTION("JZ4740 SoC HWMON driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:jz4740-hwmon");
diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
new file mode 100644
index 00000000000..74157fcda6e
--- /dev/null
+++ b/drivers/hwmon/pkgtemp.c
@@ -0,0 +1,456 @@
+/*
+ * pkgtemp.c - Linux kernel module for processor package hardware monitoring
+ *
+ * Copyright (C) 2010 Fenghua Yu <fenghua.yu@intel.com>
+ *
+ * Inspired from many hwmon drivers especially coretemp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301 USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+#include <linux/cpu.h>
+#include <linux/pci.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+#define DRVNAME	"pkgtemp"
+
+enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL, SHOW_NAME };
+
+/*
+ * Functions declaration
+ */
+
+static struct pkgtemp_data *pkgtemp_update_device(struct device *dev);
+
+struct pkgtemp_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	const char *name;
+	u32 id;
+	u16 phys_proc_id;
+	char valid;		/* zero until following fields are valid */
+	unsigned long last_updated;	/* in jiffies */
+	int temp;
+	int tjmax;
+	int ttarget;
+	u8 alarm;
+};
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+			  *devattr, char *buf)
+{
+	int ret;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pkgtemp_data *data = dev_get_drvdata(dev);
+
+	if (attr->index == SHOW_NAME)
+		ret = sprintf(buf, "%s\n", data->name);
+	else	/* show label */
+		ret = sprintf(buf, "physical id %d\n",
+			      data->phys_proc_id);
+	return ret;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute
+			  *devattr, char *buf)
+{
+	struct pkgtemp_data *data = pkgtemp_update_device(dev);
+	/* read the Out-of-spec log, never clear */
+	return sprintf(buf, "%d\n", data->alarm);
+}
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pkgtemp_data *data = pkgtemp_update_device(dev);
+	int err = 0;
+
+	if (attr->index == SHOW_TEMP)
+		err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN;
+	else if (attr->index == SHOW_TJMAX)
+		err = sprintf(buf, "%d\n", data->tjmax);
+	else
+		err = sprintf(buf, "%d\n", data->ttarget);
+	return err;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, SHOW_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, SHOW_TJMAX);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, SHOW_TTARGET);
+static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
+
+static struct attribute *pkgtemp_attributes[] = {
+	&sensor_dev_attr_name.dev_attr.attr,
+	&sensor_dev_attr_temp1_label.dev_attr.attr,
+	&dev_attr_temp1_crit_alarm.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group pkgtemp_group = {
+	.attrs = pkgtemp_attributes,
+};
+
+static struct pkgtemp_data *pkgtemp_update_device(struct device *dev)
+{
+	struct pkgtemp_data *data = dev_get_drvdata(dev);
+	unsigned int cpu;
+	int err;
+
+	mutex_lock(&data->update_lock);
+
+	if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
+		u32 eax, edx;
+
+		data->valid = 0;
+		cpu = data->id;
+		err = rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_STATUS,
+				   &eax, &edx);
+		if (!err) {
+			data->alarm = (eax >> 5) & 1;
+			data->temp = data->tjmax - (((eax >> 16)
+							& 0x7f) * 1000);
+			data->valid = 1;
+		} else
+			dev_dbg(dev, "Temperature data invalid (0x%x)\n", eax);
+
+		data->last_updated = jiffies;
+	}
+
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+static int get_tjmax(int cpu, struct device *dev)
+{
+	int default_tjmax = 100000;
+	int err;
+	u32 eax, edx;
+	u32 val;
+
+	/* IA32_TEMPERATURE_TARGET contains the TjMax value */
+	err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
+	if (!err) {
+		val = (eax >> 16) & 0xff;
+		if ((val > 80) && (val < 120)) {
+			dev_info(dev, "TjMax is %d C.\n", val);
+			return val * 1000;
+		}
+	}
+	dev_warn(dev, "Unable to read TjMax from CPU.\n");
+	return default_tjmax;
+}
+
+static int __devinit pkgtemp_probe(struct platform_device *pdev)
+{
+	struct pkgtemp_data *data;
+	int err;
+	u32 eax, edx;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+#endif
+
+	data = kzalloc(sizeof(struct pkgtemp_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		dev_err(&pdev->dev, "Out of memory\n");
+		goto exit;
+	}
+
+	data->id = pdev->id;
+#ifdef CONFIG_SMP
+	data->phys_proc_id = c->phys_proc_id;
+#endif
+	data->name = "pkgtemp";
+	mutex_init(&data->update_lock);
+
+	/* test if we can access the THERM_STATUS MSR */
+	err = rdmsr_safe_on_cpu(data->id, MSR_IA32_PACKAGE_THERM_STATUS,
+				&eax, &edx);
+	if (err) {
+		dev_err(&pdev->dev,
+			"Unable to access THERM_STATUS MSR, giving up\n");
+		goto exit_free;
+	}
+
+	data->tjmax = get_tjmax(data->id, &pdev->dev);
+	platform_set_drvdata(pdev, data);
+
+	err = rdmsr_safe_on_cpu(data->id, MSR_IA32_TEMPERATURE_TARGET,
+				&eax, &edx);
+	if (err) {
+		dev_warn(&pdev->dev, "Unable to read"
+				" IA32_TEMPERATURE_TARGET MSR\n");
+	} else {
+		data->ttarget = data->tjmax - (((eax >> 8) & 0xff) * 1000);
+		err = device_create_file(&pdev->dev,
+				&sensor_dev_attr_temp1_max.dev_attr);
+		if (err)
+			goto exit_free;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &pkgtemp_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		dev_err(&pdev->dev, "Class registration failed (%d)\n",
+			err);
+		goto exit_class;
+	}
+
+	return 0;
+
+exit_class:
+	sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit pkgtemp_remove(struct platform_device *pdev)
+{
+	struct pkgtemp_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver pkgtemp_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = DRVNAME,
+	},
+	.probe = pkgtemp_probe,
+	.remove = __devexit_p(pkgtemp_remove),
+};
+
+struct pdev_entry {
+	struct list_head list;
+	struct platform_device *pdev;
+	unsigned int cpu;
+#ifdef CONFIG_SMP
+	u16 phys_proc_id;
+#endif
+};
+
+static LIST_HEAD(pdev_list);
+static DEFINE_MUTEX(pdev_list_mutex);
+
+static int __cpuinit pkgtemp_device_add(unsigned int cpu)
+{
+	int err;
+	struct platform_device *pdev;
+	struct pdev_entry *pdev_entry;
+#ifdef CONFIG_SMP
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+#endif
+
+	mutex_lock(&pdev_list_mutex);
+
+#ifdef CONFIG_SMP
+	/* Only keep the first entry in each package */
+	list_for_each_entry(pdev_entry, &pdev_list, list) {
+		if (c->phys_proc_id == pdev_entry->phys_proc_id) {
+			err = 0;        /* Not an error */
+			goto exit;
+		}
+	}
+#endif
+
+	pdev = platform_device_alloc(DRVNAME, cpu);
+	if (!pdev) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		goto exit;
+	}
+
+	pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
+	if (!pdev_entry) {
+		err = -ENOMEM;
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+		       err);
+		goto exit_device_free;
+	}
+
+#ifdef CONFIG_SMP
+	pdev_entry->phys_proc_id = c->phys_proc_id;
+#endif
+	pdev_entry->pdev = pdev;
+	pdev_entry->cpu = cpu;
+	list_add_tail(&pdev_entry->list, &pdev_list);
+	mutex_unlock(&pdev_list_mutex);
+
+	return 0;
+
+exit_device_free:
+	kfree(pdev_entry);
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	mutex_unlock(&pdev_list_mutex);
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void pkgtemp_device_remove(unsigned int cpu)
+{
+	struct pdev_entry *p, *n;
+	unsigned int i;
+	int err;
+
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		if (p->cpu != cpu)
+			continue;
+
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		kfree(p);
+		for_each_cpu(i, cpu_core_mask(cpu)) {
+			if (i != cpu) {
+				err = pkgtemp_device_add(i);
+				if (!err)
+					break;
+			}
+		}
+		break;
+	}
+	mutex_unlock(&pdev_list_mutex);
+}
+
+static int __cpuinit pkgtemp_cpu_callback(struct notifier_block *nfb,
+				 unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long) hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		pkgtemp_device_add(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		pkgtemp_device_remove(cpu);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block pkgtemp_cpu_notifier __refdata = {
+	.notifier_call = pkgtemp_cpu_callback,
+};
+#endif				/* !CONFIG_HOTPLUG_CPU */
+
+static int __init pkgtemp_init(void)
+{
+	int i, err = -ENODEV;
+	struct pdev_entry *p, *n;
+
+	/* quick check if we run Intel */
+	if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
+		goto exit;
+
+	err = platform_driver_register(&pkgtemp_driver);
+	if (err)
+		goto exit;
+
+	for_each_online_cpu(i) {
+		struct cpuinfo_x86 *c = &cpu_data(i);
+
+		if (!cpu_has(c, X86_FEATURE_PTS))
+			continue;
+
+		err = pkgtemp_device_add(i);
+		if (err)
+			goto exit_devices_unreg;
+	}
+	if (list_empty(&pdev_list)) {
+		err = -ENODEV;
+		goto exit_driver_unreg;
+	}
+
+#ifdef CONFIG_HOTPLUG_CPU
+	register_hotcpu_notifier(&pkgtemp_cpu_notifier);
+#endif
+	return 0;
+
+exit_devices_unreg:
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		kfree(p);
+	}
+	mutex_unlock(&pdev_list_mutex);
+exit_driver_unreg:
+	platform_driver_unregister(&pkgtemp_driver);
+exit:
+	return err;
+}
+
+static void __exit pkgtemp_exit(void)
+{
+	struct pdev_entry *p, *n;
+#ifdef CONFIG_HOTPLUG_CPU
+	unregister_hotcpu_notifier(&pkgtemp_cpu_notifier);
+#endif
+	mutex_lock(&pdev_list_mutex);
+	list_for_each_entry_safe(p, n, &pdev_list, list) {
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		kfree(p);
+	}
+	mutex_unlock(&pdev_list_mutex);
+	platform_driver_unregister(&pkgtemp_driver);
+}
+
+MODULE_AUTHOR("Fenghua Yu <fenghua.yu@intel.com>");
+MODULE_DESCRIPTION("Intel processor package temperature monitor");
+MODULE_LICENSE("GPL");
+
+module_init(pkgtemp_init)
+module_exit(pkgtemp_exit)
diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c
new file mode 100644
index 00000000000..425df5bccd4
--- /dev/null
+++ b/drivers/hwmon/smm665.c
@@ -0,0 +1,743 @@
+/*
+ * Driver for SMM665 Power Controller / Monitor
+ *
+ * Copyright (C) 2010 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This driver should also work for SMM465, SMM764, and SMM766, but is untested
+ * for those chips. Only monitoring functionality is implemented.
+ *
+ * Datasheets:
+ * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
+ * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/delay.h>
+
+/* Internal reference voltage (VREF, x 1000 */
+#define SMM665_VREF_ADC_X1000	1250
+
+/* module parameters */
+static int vref = SMM665_VREF_ADC_X1000;
+module_param(vref, int, 0);
+MODULE_PARM_DESC(vref, "Reference voltage in mV");
+
+enum chips { smm465, smm665, smm665c, smm764, smm766 };
+
+/*
+ * ADC channel addresses
+ */
+#define	SMM665_MISC16_ADC_DATA_A	0x00
+#define	SMM665_MISC16_ADC_DATA_B	0x01
+#define	SMM665_MISC16_ADC_DATA_C	0x02
+#define	SMM665_MISC16_ADC_DATA_D	0x03
+#define	SMM665_MISC16_ADC_DATA_E	0x04
+#define	SMM665_MISC16_ADC_DATA_F	0x05
+#define	SMM665_MISC16_ADC_DATA_VDD	0x06
+#define	SMM665_MISC16_ADC_DATA_12V	0x07
+#define	SMM665_MISC16_ADC_DATA_INT_TEMP	0x08
+#define	SMM665_MISC16_ADC_DATA_AIN1	0x09
+#define	SMM665_MISC16_ADC_DATA_AIN2	0x0a
+
+/*
+ * Command registers
+ */
+#define	SMM665_MISC8_CMD_STS		0x80
+#define	SMM665_MISC8_STATUS1		0x81
+#define	SMM665_MISC8_STATUSS2		0x82
+#define	SMM665_MISC8_IO_POLARITY	0x83
+#define	SMM665_MISC8_PUP_POLARITY	0x84
+#define	SMM665_MISC8_ADOC_STATUS1	0x85
+#define	SMM665_MISC8_ADOC_STATUS2	0x86
+#define	SMM665_MISC8_WRITE_PROT		0x87
+#define	SMM665_MISC8_STS_TRACK		0x88
+
+/*
+ * Configuration registers and register groups
+ */
+#define SMM665_ADOC_ENABLE		0x0d
+#define SMM665_LIMIT_BASE		0x80	/* First limit register */
+
+/*
+ * Limit register bit masks
+ */
+#define SMM665_TRIGGER_RST		0x8000
+#define SMM665_TRIGGER_HEALTHY		0x4000
+#define SMM665_TRIGGER_POWEROFF		0x2000
+#define SMM665_TRIGGER_SHUTDOWN		0x1000
+#define SMM665_ADC_MASK			0x03ff
+
+#define smm665_is_critical(lim)	((lim) & (SMM665_TRIGGER_RST \
+					| SMM665_TRIGGER_POWEROFF \
+					| SMM665_TRIGGER_SHUTDOWN))
+/*
+ * Fault register bit definitions
+ * Values are merged from status registers 1/2,
+ * with status register 1 providing the upper 8 bits.
+ */
+#define SMM665_FAULT_A		0x0001
+#define SMM665_FAULT_B		0x0002
+#define SMM665_FAULT_C		0x0004
+#define SMM665_FAULT_D		0x0008
+#define SMM665_FAULT_E		0x0010
+#define SMM665_FAULT_F		0x0020
+#define SMM665_FAULT_VDD	0x0040
+#define SMM665_FAULT_12V	0x0080
+#define SMM665_FAULT_TEMP	0x0100
+#define SMM665_FAULT_AIN1	0x0200
+#define SMM665_FAULT_AIN2	0x0400
+
+/*
+ * I2C Register addresses
+ *
+ * The configuration register needs to be the configured base register.
+ * The command/status register address is derived from it.
+ */
+#define SMM665_REGMASK		0x78
+#define SMM665_CMDREG_BASE	0x48
+#define SMM665_CONFREG_BASE	0x50
+
+/*
+ *  Equations given by chip manufacturer to calculate voltage/temperature values
+ *  vref = Reference voltage on VREF_ADC pin (module parameter)
+ *  adc  = 10bit ADC value read back from registers
+ */
+
+/* Voltage A-F and VDD */
+#define SMM665_VMON_ADC_TO_VOLTS(adc)  ((adc) * vref / 256)
+
+/* Voltage 12VIN */
+#define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256)
+
+/* Voltage AIN1, AIN2 */
+#define SMM665_AIN_ADC_TO_VOLTS(adc)   ((adc) * vref / 512)
+
+/* Temp Sensor */
+#define SMM665_TEMP_ADC_TO_CELSIUS(adc) ((adc) <= 511) ?		   \
+					 ((int)(adc) * 1000 / 4) :	   \
+					 (((int)(adc) - 0x400) * 1000 / 4)
+
+#define SMM665_NUM_ADC		11
+
+/*
+ * Chip dependent ADC conversion time, in uS
+ */
+#define SMM665_ADC_WAIT_SMM665	70
+#define SMM665_ADC_WAIT_SMM766	185
+
+struct smm665_data {
+	enum chips type;
+	int conversion_time;		/* ADC conversion time */
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	bool valid;
+	unsigned long last_updated;	/* in jiffies */
+	u16 adc[SMM665_NUM_ADC];	/* adc values (raw) */
+	u16 faults;			/* fault status */
+	/* The following values are in mV */
+	int critical_min_limit[SMM665_NUM_ADC];
+	int alarm_min_limit[SMM665_NUM_ADC];
+	int critical_max_limit[SMM665_NUM_ADC];
+	int alarm_max_limit[SMM665_NUM_ADC];
+	struct i2c_client *cmdreg;
+};
+
+/*
+ * smm665_read16()
+ *
+ * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>.
+ */
+static int smm665_read16(struct i2c_client *client, int reg)
+{
+	int rv, val;
+
+	rv = i2c_smbus_read_byte_data(client, reg);
+	if (rv < 0)
+		return rv;
+	val = rv << 8;
+	rv = i2c_smbus_read_byte_data(client, reg + 1);
+	if (rv < 0)
+		return rv;
+	val |= rv;
+	return val;
+}
+
+/*
+ * Read adc value.
+ */
+static int smm665_read_adc(struct smm665_data *data, int adc)
+{
+	struct i2c_client *client = data->cmdreg;
+	int rv;
+	int radc;
+
+	/*
+	 * Algorithm for reading ADC, per SMM665 datasheet
+	 *
+	 *  {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]}
+	 * [wait conversion time]
+	 *  {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]}
+	 *
+	 * To implement the first part of this exchange,
+	 * do a full read transaction and expect a failure/Nack.
+	 * This sets up the address pointer on the SMM665
+	 * and starts the ADC conversion.
+	 * Then do a two-byte read transaction.
+	 */
+	rv = i2c_smbus_read_byte_data(client, adc << 3);
+	if (rv != -ENXIO) {
+		/*
+		 * We expect ENXIO to reflect NACK
+		 * (per Documentation/i2c/fault-codes).
+		 * Everything else is an error.
+		 */
+		dev_dbg(&client->dev,
+			"Unexpected return code %d when setting ADC index", rv);
+		return (rv < 0) ? rv : -EIO;
+	}
+
+	udelay(data->conversion_time);
+
+	/*
+	 * Now read two bytes.
+	 *
+	 * Neither i2c_smbus_read_byte() nor
+	 * i2c_smbus_read_block_data() worked here,
+	 * so use i2c_smbus_read_word_data() instead.
+	 * We could also try to use i2c_master_recv(),
+	 * but that is not always supported.
+	 */
+	rv = i2c_smbus_read_word_data(client, 0);
+	if (rv < 0) {
+		dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
+		return -1;
+	}
+	/*
+	 * Validate/verify readback adc channel (in bit 11..14).
+	 * High byte is in lower 8 bit of rv, so only shift by 3.
+	 */
+	radc = (rv >> 3) & 0x0f;
+	if (radc != adc) {
+		dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
+			adc, radc);
+		return -EIO;
+	}
+	/*
+	 * Chip replies with H/L, while SMBus expects L/H.
+	 * Thus, byte order is reversed, and we have to swap
+	 * the result.
+	 */
+	rv = swab16(rv) & SMM665_ADC_MASK;
+
+	return rv;
+}
+
+static struct smm665_data *smm665_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smm665_data *data = i2c_get_clientdata(client);
+	struct smm665_data *ret = data;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		int i, val;
+
+		/*
+		 * read status registers
+		 */
+		val = smm665_read16(client, SMM665_MISC8_STATUS1);
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->faults = val;
+
+		/* Read adc registers */
+		for (i = 0; i < SMM665_NUM_ADC; i++) {
+			val = smm665_read_adc(data, i);
+			if (unlikely(val < 0)) {
+				ret = ERR_PTR(val);
+				goto abort;
+			}
+			data->adc[i] = val;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+/* Return converted value from given adc */
+static int smm665_convert(u16 adcval, int index)
+{
+	int val = 0;
+
+	switch (index) {
+	case SMM665_MISC16_ADC_DATA_12V:
+		val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
+		break;
+
+	case SMM665_MISC16_ADC_DATA_VDD:
+	case SMM665_MISC16_ADC_DATA_A:
+	case SMM665_MISC16_ADC_DATA_B:
+	case SMM665_MISC16_ADC_DATA_C:
+	case SMM665_MISC16_ADC_DATA_D:
+	case SMM665_MISC16_ADC_DATA_E:
+	case SMM665_MISC16_ADC_DATA_F:
+		val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
+		break;
+
+	case SMM665_MISC16_ADC_DATA_AIN1:
+	case SMM665_MISC16_ADC_DATA_AIN2:
+		val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
+		break;
+
+	case SMM665_MISC16_ADC_DATA_INT_TEMP:
+		val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK);
+		break;
+
+	default:
+		/* If we get here, the developer messed up */
+		WARN_ON_ONCE(1);
+		break;
+	}
+
+	return val;
+}
+
+static int smm665_get_min(struct device *dev, int index)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smm665_data *data = i2c_get_clientdata(client);
+
+	return data->alarm_min_limit[index];
+}
+
+static int smm665_get_max(struct device *dev, int index)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smm665_data *data = i2c_get_clientdata(client);
+
+	return data->alarm_max_limit[index];
+}
+
+static int smm665_get_lcrit(struct device *dev, int index)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smm665_data *data = i2c_get_clientdata(client);
+
+	return data->critical_min_limit[index];
+}
+
+static int smm665_get_crit(struct device *dev, int index)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct smm665_data *data = i2c_get_clientdata(client);
+
+	return data->critical_max_limit[index];
+}
+
+static ssize_t smm665_show_crit_alarm(struct device *dev,
+				      struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct smm665_data *data = smm665_update_device(dev);
+	int val = 0;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	if (data->faults & (1 << attr->index))
+		val = 1;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t smm665_show_input(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct smm665_data *data = smm665_update_device(dev);
+	int adc = attr->index;
+	int val;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	val = smm665_convert(data->adc[adc], adc);
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+#define SMM665_SHOW(what) \
+  static ssize_t smm665_show_##what(struct device *dev, \
+				    struct device_attribute *da, char *buf) \
+{ \
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
+	const int val = smm665_get_##what(dev, attr->index); \
+	return snprintf(buf, PAGE_SIZE, "%d\n", val); \
+}
+
+SMM665_SHOW(min);
+SMM665_SHOW(max);
+SMM665_SHOW(lcrit);
+SMM665_SHOW(crit);
+
+/* These macros are used below in constructing device attribute objects
+ * for use with sysfs_create_group() to make a sysfs device file
+ * for each register.
+ */
+
+#define SMM665_ATTR(name, type, cmd_idx) \
+	static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \
+				  smm665_show_##type, NULL, cmd_idx)
+
+/* Construct a sensor_device_attribute structure for each register */
+
+/* Input voltages */
+SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V);
+SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD);
+SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A);
+SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B);
+SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C);
+SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D);
+SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E);
+SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F);
+SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1);
+SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2);
+
+/* Input voltages min */
+SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V);
+SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD);
+SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A);
+SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B);
+SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C);
+SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D);
+SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E);
+SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F);
+SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1);
+SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2);
+
+/* Input voltages max */
+SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V);
+SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD);
+SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A);
+SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B);
+SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C);
+SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D);
+SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E);
+SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F);
+SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1);
+SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2);
+
+/* Input voltages lcrit */
+SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V);
+SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD);
+SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A);
+SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B);
+SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C);
+SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D);
+SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E);
+SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F);
+SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1);
+SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2);
+
+/* Input voltages crit */
+SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V);
+SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD);
+SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A);
+SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B);
+SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C);
+SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D);
+SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E);
+SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F);
+SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1);
+SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2);
+
+/* critical alarms */
+SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V);
+SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD);
+SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A);
+SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B);
+SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C);
+SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D);
+SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E);
+SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F);
+SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1);
+SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2);
+
+/* Temperature */
+SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP);
+SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP);
+SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP);
+SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP);
+SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP);
+SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP);
+
+/*
+ * Finally, construct an array of pointers to members of the above objects,
+ * as required for sysfs_create_group()
+ */
+static struct attribute *smm665_attributes[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in1_crit.dev_attr.attr,
+	&sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in2_crit.dev_attr.attr,
+	&sensor_dev_attr_in2_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in3_crit.dev_attr.attr,
+	&sensor_dev_attr_in3_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in4_crit.dev_attr.attr,
+	&sensor_dev_attr_in4_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in5_crit.dev_attr.attr,
+	&sensor_dev_attr_in5_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in6_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in6_crit.dev_attr.attr,
+	&sensor_dev_attr_in6_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in7_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in7_crit.dev_attr.attr,
+	&sensor_dev_attr_in7_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in8_input.dev_attr.attr,
+	&sensor_dev_attr_in8_min.dev_attr.attr,
+	&sensor_dev_attr_in8_max.dev_attr.attr,
+	&sensor_dev_attr_in8_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in8_crit.dev_attr.attr,
+	&sensor_dev_attr_in8_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in9_input.dev_attr.attr,
+	&sensor_dev_attr_in9_min.dev_attr.attr,
+	&sensor_dev_attr_in9_max.dev_attr.attr,
+	&sensor_dev_attr_in9_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in9_crit.dev_attr.attr,
+	&sensor_dev_attr_in9_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_in10_input.dev_attr.attr,
+	&sensor_dev_attr_in10_min.dev_attr.attr,
+	&sensor_dev_attr_in10_max.dev_attr.attr,
+	&sensor_dev_attr_in10_lcrit.dev_attr.attr,
+	&sensor_dev_attr_in10_crit.dev_attr.attr,
+	&sensor_dev_attr_in10_crit_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_lcrit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group smm665_group = {
+	.attrs = smm665_attributes,
+};
+
+static int smm665_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct smm665_data *data;
+	int i, ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0)
+		return -ENODEV;
+
+	ret = -ENOMEM;
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		goto out_return;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	data->type = id->driver_data;
+	data->cmdreg = i2c_new_dummy(adapter, (client->addr & ~SMM665_REGMASK)
+				     | SMM665_CMDREG_BASE);
+	if (!data->cmdreg)
+		goto out_kfree;
+
+	switch (data->type) {
+	case smm465:
+	case smm665:
+		data->conversion_time = SMM665_ADC_WAIT_SMM665;
+		break;
+	case smm665c:
+	case smm764:
+	case smm766:
+		data->conversion_time = SMM665_ADC_WAIT_SMM766;
+		break;
+	}
+
+	ret = -ENODEV;
+	if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0)
+		goto out_unregister;
+
+	/*
+	 * Read limits.
+	 *
+	 * Limit registers start with register SMM665_LIMIT_BASE.
+	 * Each channel uses 8 registers, providing four limit values
+	 * per channel. Each limit value requires two registers, with the
+	 * high byte in the first register and the low byte in the second
+	 * register. The first two limits are under limit values, followed
+	 * by two over limit values.
+	 *
+	 * Limit register order matches the ADC register order, so we use
+	 * ADC register defines throughout the code to index limit registers.
+	 *
+	 * We save the first retrieved value both as "critical" and "alarm"
+	 * value. The second value overwrites either the critical or the
+	 * alarm value, depending on its configuration. This ensures that both
+	 * critical and alarm values are initialized, even if both registers are
+	 * configured as critical or non-critical.
+	 */
+	for (i = 0; i < SMM665_NUM_ADC; i++) {
+		int val;
+
+		val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8);
+		if (unlikely(val < 0))
+			goto out_unregister;
+		data->critical_min_limit[i] = data->alarm_min_limit[i]
+		  = smm665_convert(val, i);
+		val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2);
+		if (unlikely(val < 0))
+			goto out_unregister;
+		if (smm665_is_critical(val))
+			data->critical_min_limit[i] = smm665_convert(val, i);
+		else
+			data->alarm_min_limit[i] = smm665_convert(val, i);
+		val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4);
+		if (unlikely(val < 0))
+			goto out_unregister;
+		data->critical_max_limit[i] = data->alarm_max_limit[i]
+		  = smm665_convert(val, i);
+		val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6);
+		if (unlikely(val < 0))
+			goto out_unregister;
+		if (smm665_is_critical(val))
+			data->critical_max_limit[i] = smm665_convert(val, i);
+		else
+			data->alarm_max_limit[i] = smm665_convert(val, i);
+	}
+
+	/* Register sysfs hooks */
+	ret = sysfs_create_group(&client->dev.kobj, &smm665_group);
+	if (ret)
+		goto out_unregister;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto out_remove_group;
+	}
+
+	return 0;
+
+out_remove_group:
+	sysfs_remove_group(&client->dev.kobj, &smm665_group);
+out_unregister:
+	i2c_unregister_device(data->cmdreg);
+out_kfree:
+	kfree(data);
+out_return:
+	return ret;
+}
+
+static int smm665_remove(struct i2c_client *client)
+{
+	struct smm665_data *data = i2c_get_clientdata(client);
+
+	i2c_unregister_device(data->cmdreg);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &smm665_group);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id smm665_id[] = {
+	{"smm465", smm465},
+	{"smm665", smm665},
+	{"smm665c", smm665c},
+	{"smm764", smm764},
+	{"smm766", smm766},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, smm665_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver smm665_driver = {
+	.driver = {
+		   .name = "smm665",
+		   },
+	.probe = smm665_probe,
+	.remove = smm665_remove,
+	.id_table = smm665_id,
+};
+
+static int __init smm665_init(void)
+{
+	return i2c_add_driver(&smm665_driver);
+}
+
+static void __exit smm665_exit(void)
+{
+	i2c_del_driver(&smm665_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("SMM665 driver");
+MODULE_LICENSE("GPL");
+
+module_init(smm665_init);
+module_exit(smm665_exit);
diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c
index 5da5942cf97..89643261ccd 100644
--- a/drivers/hwmon/ultra45_env.c
+++ b/drivers/hwmon/ultra45_env.c
@@ -311,12 +311,12 @@ static struct of_platform_driver env_driver = {
 
 static int __init env_init(void)
 {
-	return of_register_driver(&env_driver, &of_bus_type);
+	return of_register_platform_driver(&env_driver);
 }
 
 static void __exit env_exit(void)
 {
-	of_unregister_driver(&env_driver);
+	of_unregister_platform_driver(&env_driver);
 }
 
 module_init(env_init);
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index b02b4533651..e591de1bc70 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -652,6 +652,7 @@ static int __devinit cpm_i2c_probe(struct of_device *ofdev,
 	cpm->adap = cpm_ops;
 	i2c_set_adapdata(&cpm->adap, cpm);
 	cpm->adap.dev.parent = &ofdev->dev;
+	cpm->adap.dev.of_node = of_node_get(ofdev->dev.of_node);
 
 	result = cpm_i2c_setup(cpm);
 	if (result) {
@@ -676,11 +677,6 @@ static int __devinit cpm_i2c_probe(struct of_device *ofdev,
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
-	/*
-	 * register OF I2C devices
-	 */
-	of_register_i2c_devices(&cpm->adap, ofdev->dev.of_node);
-
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index bf344135647..1168d61418c 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -745,6 +745,7 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	/* Register it with i2c layer */
 	adap = &dev->adap;
 	adap->dev.parent = &ofdev->dev;
+	adap->dev.of_node = of_node_get(np);
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
@@ -760,9 +761,6 @@ static int __devinit iic_probe(struct of_device *ofdev,
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
-	/* Now register all the child nodes */
-	of_register_i2c_devices(adap, np);
-
 	return 0;
 
 error_cleanup:
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index df00eb1f11f..6545d1c99b6 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -63,6 +63,7 @@ struct mpc_i2c {
 	wait_queue_head_t queue;
 	struct i2c_adapter adap;
 	int irq;
+	u32 real_clk;
 };
 
 struct mpc_i2c_divider {
@@ -96,20 +97,23 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 /* Sometimes 9th clock pulse isn't generated, and slave doesn't release
  * the bus, because it wants to send ACK.
  * Following sequence of enabling/disabling and sending start/stop generates
- * the pulse, so it's all OK.
+ * the 9 pulses, so it's all OK.
  */
 static void mpc_i2c_fixup(struct mpc_i2c *i2c)
 {
-	writeccr(i2c, 0);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX);
-	udelay(30);
-	writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
-	udelay(30);
-	writeccr(i2c, CCR_MEN);
-	udelay(30);
+	int k;
+	u32 delay_val = 1000000 / i2c->real_clk + 1;
+
+	if (delay_val < 2)
+		delay_val = 2;
+
+	for (k = 9; k; k--) {
+		writeccr(i2c, 0);
+		writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+		udelay(delay_val);
+		writeccr(i2c, CCR_MEN);
+		udelay(delay_val << 1);
+	}
 }
 
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
@@ -190,15 +194,18 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
 };
 
 static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
-					  int prescaler)
+					  int prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x3f -> div = 2048 */
+		*real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
 		return -EINVAL;
+	}
 
 	/* Determine divider value */
 	divider = mpc5xxx_get_bus_frequency(node) / clock;
@@ -216,7 +223,8 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
 			break;
 	}
 
-	return div ? (int)div->fdr : -EINVAL;
+	*real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+	return (int)div->fdr;
 }
 
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -231,13 +239,14 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
 
 	if (ret >= 0)
-		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+		dev_info(i2c->dev, "clock %u Hz (fdr=%d)\n", i2c->real_clk,
+			 fdr);
 }
 #else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
@@ -334,14 +343,17 @@ static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
 }
 
 static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
-					  u32 prescaler)
+					  u32 prescaler, u32 *real_clk)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	u32 divider;
 	int i;
 
-	if (clock == MPC_I2C_CLOCK_LEGACY)
+	if (clock == MPC_I2C_CLOCK_LEGACY) {
+		/* see below - default fdr = 0x1031 -> div = 16 * 3072 */
+		*real_clk = fsl_get_sys_freq() / prescaler / (16 * 3072);
 		return -EINVAL;
+	}
 
 	/* Determine proper divider value */
 	if (of_device_is_compatible(node, "fsl,mpc8544-i2c"))
@@ -364,6 +376,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
 			break;
 	}
 
+	*real_clk = fsl_get_sys_freq() / prescaler / div->divider;
 	return div ? (int)div->fdr : -EINVAL;
 }
 
@@ -380,7 +393,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 		return;
 	}
 
-	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler, &i2c->real_clk);
 	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
 	writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
@@ -388,7 +401,7 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 
 	if (ret >= 0)
 		dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
-			 clock, fdr >> 8, fdr & 0xff);
+			 i2c->real_clk, fdr >> 8, fdr & 0xff);
 }
 
 #else /* !CONFIG_FSL_SOC */
@@ -500,10 +513,14 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 			return -EINTR;
 		}
 		if (time_after(jiffies, orig_jiffies + HZ)) {
+			u8 status = readb(i2c->base + MPC_I2C_SR);
+
 			dev_dbg(i2c->dev, "timeout\n");
-			if (readb(i2c->base + MPC_I2C_SR) ==
-			    (CSR_MCF | CSR_MBB | CSR_RXAK))
+			if ((status & (CSR_MCF | CSR_MBB | CSR_RXAK)) != 0) {
+				writeb(status & ~CSR_MAL,
+				       i2c->base + MPC_I2C_SR);
 				mpc_i2c_fixup(i2c);
+			}
 			return -EIO;
 		}
 		schedule();
@@ -595,18 +612,26 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock, 0);
 	}
 
+	prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
+	if (prop && plen == sizeof(u32)) {
+		mpc_ops.timeout = *prop * HZ / 1000000;
+		if (mpc_ops.timeout < 5)
+			mpc_ops.timeout = 5;
+	}
+	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
+
 	dev_set_drvdata(&op->dev, i2c);
 
 	i2c->adap = mpc_ops;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &op->dev;
+	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
 
 	result = i2c_add_adapter(&i2c->adap);
 	if (result < 0) {
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
-	of_register_i2c_devices(&i2c->adap, op->dev.of_node);
 
 	return result;
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 0815e10da7c..df937df845e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -30,6 +30,8 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
+#include <linux/of_i2c.h>
+#include <linux/of_device.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
@@ -70,6 +72,10 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
 	if (!client)
 		return 0;
 
+	/* Attempt an OF style match */
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
 	driver = to_i2c_driver(drv);
 	/* match on an id table if there is one */
 	if (driver->id_table)
@@ -790,6 +796,9 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
+	/* Register devices from the device tree */
+	of_i2c_register_devices(adap);
+
 	/* Notify drivers */
 	mutex_lock(&core_lock);
 	dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 64207df8da8..2de76cc08f6 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -506,15 +506,22 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
 	return (flags & REQ_FAILED) ? -EIO : 0;
 }
 
-static void ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
+/*
+ * returns true if rq has been completed
+ */
+static bool ide_cd_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd)
 {
 	unsigned int nr_bytes = cmd->nbytes - cmd->nleft;
 
 	if (cmd->tf_flags & IDE_TFLAG_WRITE)
 		nr_bytes -= cmd->last_xfer_len;
 
-	if (nr_bytes > 0)
+	if (nr_bytes > 0) {
 		ide_complete_rq(drive, 0, nr_bytes);
+		return true;
+	}
+
+	return false;
 }
 
 static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
@@ -679,7 +686,8 @@ out_end:
 		}
 
 		if (uptodate == 0 && rq->bio)
-			ide_cd_error_cmd(drive, cmd);
+			if (ide_cd_error_cmd(drive, cmd))
+				return ide_stopped;
 
 		/* make sure it's fully ended */
 		if (blk_fs_request(rq) == 0) {
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 0b7815d2581..2a4cb9c18f0 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -43,7 +43,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -98,9 +97,8 @@ static int ide_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = info;
 
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.IOAddrLines = 3;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -229,24 +227,27 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev,
 
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+
 		pdev->conf.ConfigIndex = cfg->index;
-		pdev->io.BasePort1 = io->win[0].base;
-		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		pdev->resource[0]->start = io->win[0].base;
+		if (!(io->flags & CISTPL_IO_16BIT)) {
+			pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+			pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+		}
 		if (io->nwin == 2) {
-			pdev->io.NumPorts1 = 8;
-			pdev->io.BasePort2 = io->win[1].base;
-			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
+			pdev->resource[0]->end = 8;
+			pdev->resource[1]->start = io->win[1].base;
+			pdev->resource[1]->end = (stk->is_kme) ? 2 : 1;
+			if (pcmcia_request_io(pdev) != 0)
 				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort2;
+			stk->ctl_base = pdev->resource[1]->start;
 		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->io.NumPorts1 = io->win[0].len;
-			pdev->io.NumPorts2 = 0;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
+			pdev->resource[0]->end = io->win[0].len;
+			pdev->resource[1]->end = 0;
+			if (pcmcia_request_io(pdev) != 0)
 				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+			stk->ctl_base = pdev->resource[0]->start + 0x0e;
 		} else
 			return -ENODEV;
 		/* If we've got this far, we're done */
@@ -280,7 +281,7 @@ static int ide_config(struct pcmcia_device *link)
 	    if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
 		    goto failed; /* No suitable config found */
     }
-    io_base = link->io.BasePort1;
+    io_base = link->resource[0]->start;
     ctl_base = stk->ctl_base;
 
     if (!link->irq)
@@ -297,7 +298,7 @@ static int ide_config(struct pcmcia_device *link)
 	outb(0x81, ctl_base+1);
 
      host = idecs_register(io_base, ctl_base, link->irq, link);
-     if (host == NULL && link->io.NumPorts1 == 0x20) {
+     if (host == NULL && resource_size(link->resource[0]) == 0x20) {
 	    outb(0x02, ctl_base + 0x10);
 	    host = idecs_register(io_base + 0x10, ctl_base + 0x10,
 				  link->irq, link);
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 67fb73559fd..34b9872f35d 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -480,13 +480,9 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg)
 	u16 nsect		= 0;
 	char __user *buf = (char __user *)arg;
 
-	req_task = kzalloc(tasksize, GFP_KERNEL);
-	if (req_task == NULL)
-		return -ENOMEM;
-	if (copy_from_user(req_task, buf, tasksize)) {
-		kfree(req_task);
-		return -EFAULT;
-	}
+	req_task = memdup_user(buf, tasksize);
+	if (IS_ERR(req_task))
+		return PTR_ERR(req_task);
 
 	taskout = req_task->out_size;
 	taskin  = req_task->in_size;
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index 1d80f1fdbc9..7002765b593 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -64,7 +64,7 @@ static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	pair = ide_get_pair_dev(drive);
 	if (pair)
-		safe = min(safe, pair->pio_mode - XFER_PIO_0);
+		safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0);
 	tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe);
 }
 
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 3c736775187..bed3e39aac9 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -114,7 +114,7 @@ static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	pair = ide_get_pair_dev(drive);
 	if (pair)
-		safe = min(safe, pair->pio_mode - XFER_PIO_0);
+		safe = min_t(u8, safe, pair->pio_mode - XFER_PIO_0);
 	/*
 	 * Update Command Transfer Mode for master/slave and Data
 	 * Transfer Mode for this drive.
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 101f4002238..d2a0997b78f 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -79,7 +79,7 @@ static struct via_isa_bridge {
 	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
-	{ "vt6415",	PCI_DEVICE_ID_VIA_6410,     0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt6415",	PCI_DEVICE_ID_VIA_6415,     0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index adaefabc40e..c5a031b79d0 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -172,7 +172,7 @@ static DEFINE_SPINLOCK(dv1394_cards_lock);
 
 static inline struct video_card* file_to_video_card(struct file *file)
 {
-	return (struct video_card*) file->private_data;
+	return file->private_data;
 }
 
 /*** FRAME METHODS *********************************************************/
@@ -610,7 +610,7 @@ static void frame_prepare(struct video_card *video, unsigned int this_frame)
 	} else {
 
 		u32 transmit_sec, transmit_cyc;
-		u32 ts_cyc, ts_off;
+		u32 ts_cyc;
 
 		/* DMA is stopped, so this is the very first frame */
 		video->active_frame = this_frame;
@@ -636,7 +636,6 @@ static void frame_prepare(struct video_card *video, unsigned int this_frame)
 		transmit_sec += transmit_cyc/8000;
 		transmit_cyc %= 8000;
 
-		ts_off = ct_off;
 		ts_cyc = transmit_cyc + 3;
 		ts_cyc %= 8000;
 
@@ -1784,7 +1783,7 @@ static int dv1394_open(struct inode *inode, struct file *file)
 	struct video_card *video = NULL;
 
 	if (file->private_data) {
-		video = (struct video_card*) file->private_data;
+		video = file->private_data;
 
 	} else {
 		/* look up the card by ID */
@@ -2004,7 +2003,7 @@ static void ir_tasklet_func(unsigned long data)
 
 		int sof=0; /* start-of-frame flag */
 		struct frame *f;
-		u16 packet_length, packet_time;
+		u16 packet_length;
 		int i, dbc=0;
 		struct DMA_descriptor_block *block = NULL;
 		u16 xferstatus;
@@ -2024,11 +2023,6 @@ static void ir_tasklet_func(unsigned long data)
 						sizeof(struct packet));
 
 			packet_length = le16_to_cpu(p->data_length);
-			packet_time   = le16_to_cpu(p->timestamp);
-
-			irq_printk("received packet %02d, timestamp=%04x, length=%04x, sof=%02x%02x\n", video->current_packet,
-				   packet_time, packet_length,
-				   p->data[0], p->data[1]);
 
 			/* get the descriptor based on packet_buffer cursor */
 			f = video->frames[video->current_packet / MAX_PACKETS];
@@ -2320,7 +2314,6 @@ static void dv1394_add_host(struct hpsb_host *host)
 
 static void dv1394_host_reset(struct hpsb_host *host)
 {
-	struct ti_ohci *ohci;
 	struct video_card *video = NULL, *tmp_vid;
 	unsigned long flags;
 
@@ -2328,9 +2321,6 @@ static void dv1394_host_reset(struct hpsb_host *host)
 	if (strcmp(host->driver->name, OHCI1394_DRIVER_NAME))
 		return;
 
-	ohci = (struct ti_ohci *)host->hostdata;
-
-
 	/* find the corresponding video_cards */
 	spin_lock_irqsave(&dv1394_cards_lock, flags);
 	list_for_each_entry(tmp_vid, &dv1394_cards, list) {
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index a4e9dcb6d4a..bc289e367e3 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -1258,7 +1258,6 @@ static void ether1394_iso(struct hpsb_iso *iso)
 	char *buf;
 	struct eth1394_host_info *hi;
 	struct net_device *dev;
-	struct eth1394_priv *priv;
 	unsigned int len;
 	u32 specifier_id;
 	u16 source_id;
@@ -1288,8 +1287,6 @@ static void ether1394_iso(struct hpsb_iso *iso)
 			       (be32_to_cpu(data[1]) & 0xff000000) >> 24;
 		source_id = be32_to_cpu(data[0]) >> 16;
 
-		priv = netdev_priv(dev);
-
 		if (info->channel != (iso->host->csr.broadcast_channel & 0x3f)
 		    || specifier_id != ETHER1394_GASP_SPECIFIER_ID) {
 			/* This packet is not for us */
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index b563d5e9fa2..f3401427404 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -440,7 +440,7 @@ static struct pending_request *next_complete_req(struct file_info *fi)
 static ssize_t raw1394_read(struct file *file, char __user * buffer,
 			    size_t count, loff_t * offset_is_ignored)
 {
-	struct file_info *fi = (struct file_info *)file->private_data;
+	struct file_info *fi = file->private_data;
 	struct pending_request *req;
 	ssize_t ret;
 
@@ -1015,7 +1015,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 	struct arm_addr *arm_addr = NULL;
 	struct arm_request *arm_req = NULL;
 	struct arm_response *arm_resp = NULL;
-	int found = 0, size = 0, rcode = -1, length_conflict = 0;
+	int found = 0, size = 0, rcode = -1;
 	struct arm_request_response *arm_req_resp = NULL;
 
 	DBGMSG("arm_write called by node: %X "
@@ -1054,7 +1054,6 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 	}
 	if (arm_addr->rec_length < length) {
 		DBGMSG("arm_write blocklength too big -> rcode_data_error");
-		length_conflict = 1;
 		rcode = RCODE_DATA_ERROR;	/* hardware error, data is unavailable */
 	}
 	if (rcode == -1) {
@@ -2245,7 +2244,7 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 static ssize_t raw1394_write(struct file *file, const char __user * buffer,
 			     size_t count, loff_t * offset_is_ignored)
 {
-	struct file_info *fi = (struct file_info *)file->private_data;
+	struct file_info *fi = file->private_data;
 	struct pending_request *req;
 	ssize_t retval = -EBADFD;
 
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 4565cb5d3d1..d6e251a300c 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1350,12 +1350,11 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
 	struct csr1212_keyval *kv;
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
-	u32 unit_characteristics, firmware_revision, model;
+	u32 firmware_revision, model;
 	unsigned workarounds;
 	int i;
 
 	management_agent_addr = 0;
-	unit_characteristics = 0;
 	firmware_revision = SBP2_ROM_VALUE_MISSING;
 	model = ud->flags & UNIT_DIRECTORY_MODEL_ID ?
 				ud->model_id : SBP2_ROM_VALUE_MISSING;
@@ -1372,17 +1371,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
 				lu->lun = ORB_SET_LUN(kv->value.immediate);
 			break;
 
-		case SBP2_UNIT_CHARACTERISTICS_KEY:
-			/* FIXME: This is ignored so far.
-			 * See SBP-2 clause 7.4.8. */
-			unit_characteristics = kv->value.immediate;
-			break;
 
 		case SBP2_FIRMWARE_REVISION_KEY:
 			firmware_revision = kv->value.immediate;
 			break;
 
 		default:
+			/* FIXME: Check for SBP2_UNIT_CHARACTERISTICS_KEY
+			 * mgt_ORB_timeout and ORB_size, SBP-2 clause 7.4.8. */
+
 			/* FIXME: Check for SBP2_DEVICE_TYPE_AND_LUN_KEY.
 			 * Its "ordered" bit has consequences for command ORB
 			 * list handling. See SBP-2 clauses 4.6, 7.4.11, 10.2 */
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index a42bd6893bc..5c74f796d7f 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -720,7 +720,7 @@ static inline unsigned video1394_buffer_state(struct dma_iso_ctx *d,
 static long video1394_ioctl(struct file *file,
 			    unsigned int cmd, unsigned long arg)
 {
-	struct file_ctx *ctx = (struct file_ctx *)file->private_data;
+	struct file_ctx *ctx = file->private_data;
 	struct ti_ohci *ohci = ctx->ohci;
 	unsigned long flags;
 	void __user *argp = (void __user *)arg;
@@ -1045,14 +1045,9 @@ static long video1394_ioctl(struct file *file,
 			if (get_user(qv, &p->packet_sizes))
 				return -EFAULT;
 
-			psizes = kmalloc(buf_size, GFP_KERNEL);
-			if (!psizes)
-				return -ENOMEM;
-
-			if (copy_from_user(psizes, qv, buf_size)) {
-				kfree(psizes);
-				return -EFAULT;
-			}
+			psizes = memdup_user(qv, buf_size);
+			if (IS_ERR(psizes))
+				return PTR_ERR(psizes);
 		}
 
 		spin_lock_irqsave(&d->lock,flags);
@@ -1177,7 +1172,7 @@ static long video1394_ioctl(struct file *file,
 
 static int video1394_mmap(struct file *file, struct vm_area_struct *vma)
 {
-	struct file_ctx *ctx = (struct file_ctx *)file->private_data;
+	struct file_ctx *ctx = file->private_data;
 
 	if (ctx->current_ctx == NULL) {
 		PRINT(KERN_ERR, ctx->ohci->host->id,
@@ -1244,7 +1239,7 @@ static int video1394_open(struct inode *inode, struct file *file)
 
 static int video1394_release(struct inode *inode, struct file *file)
 {
-	struct file_ctx *ctx = (struct file_ctx *)file->private_data;
+	struct file_ctx *ctx = file->private_data;
 	struct ti_ohci *ohci = ctx->ohci;
 	struct list_head *lh, *next;
 	u64 mask;
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index ad63b79afac..64e0903091a 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -2409,10 +2409,12 @@ int ib_send_cm_mra(struct ib_cm_id *cm_id,
 		msg_response = CM_MSG_RESPONSE_REP;
 		break;
 	case IB_CM_ESTABLISHED:
-		cm_state = cm_id->state;
-		lap_state = IB_CM_MRA_LAP_SENT;
-		msg_response = CM_MSG_RESPONSE_OTHER;
-		break;
+		if (cm_id->lap_state == IB_CM_LAP_RCVD) {
+			cm_state = cm_id->state;
+			lap_state = IB_CM_MRA_LAP_SENT;
+			msg_response = CM_MSG_RESPONSE_OTHER;
+			break;
+		}
 	default:
 		ret = -EINVAL;
 		goto error1;
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 6babb72b39f..5fa85690951 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -1085,7 +1085,6 @@ err_cdev:
 static void ib_umad_kill_port(struct ib_umad_port *port)
 {
 	struct ib_umad_file *file;
-	int already_dead;
 	int id;
 
 	dev_set_drvdata(port->dev,    NULL);
@@ -1103,7 +1102,6 @@ static void ib_umad_kill_port(struct ib_umad_port *port)
 
 	list_for_each_entry(file, &port->file_list, port_list) {
 		mutex_lock(&file->mutex);
-		already_dead = file->agents_dead;
 		file->agents_dead = 1;
 		mutex_unlock(&file->mutex);
 
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index a7da9be43e6..e0fa2223871 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -310,8 +310,8 @@ EXPORT_SYMBOL(ib_create_qp);
 
 static const struct {
 	int			valid;
-	enum ib_qp_attr_mask	req_param[IB_QPT_RAW_ETY + 1];
-	enum ib_qp_attr_mask	opt_param[IB_QPT_RAW_ETY + 1];
+	enum ib_qp_attr_mask	req_param[IB_QPT_RAW_ETHERTYPE + 1];
+	enum ib_qp_attr_mask	opt_param[IB_QPT_RAW_ETHERTYPE + 1];
 } qp_state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = {
 	[IB_QPS_RESET] = {
 		[IB_QPS_RESET] = { .valid = 1 },
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index abd683ea326..d88077a2199 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -137,7 +137,7 @@ static void stop_ep_timer(struct iwch_ep *ep)
 	put_ep(&ep->com);
 }
 
-int iwch_l2t_send(struct t3cdev *tdev, struct sk_buff *skb, struct l2t_entry *l2e)
+static int iwch_l2t_send(struct t3cdev *tdev, struct sk_buff *skb, struct l2t_entry *l2e)
 {
 	int	error = 0;
 	struct cxio_rdev *rdev;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 9bbb65bba67..c64d27bf2c1 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -371,7 +371,7 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	}
 	num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr,
 		  qhp->wq.sq_size_log2);
-	if (num_wrs <= 0) {
+	if (num_wrs == 0) {
 		spin_unlock_irqrestore(&qhp->lock, flag);
 		err = -ENOMEM;
 		goto out;
@@ -554,7 +554,7 @@ int iwch_bind_mw(struct ib_qp *qp,
 	}
 	num_wrs = Q_FREECNT(qhp->wq.sq_rptr, qhp->wq.sq_wptr,
 			    qhp->wq.sq_size_log2);
-	if ((num_wrs) <= 0) {
+	if (num_wrs == 0) {
 		spin_unlock_irqrestore(&qhp->lock, flag);
 		return -ENOMEM;
 	}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 8c9b483a0d9..32d352a88d5 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -61,6 +61,10 @@ static char *states[] = {
 	NULL,
 };
 
+static int dack_mode;
+module_param(dack_mode, int, 0644);
+MODULE_PARM_DESC(dack_mode, "Delayed ack mode (default=0)");
+
 int c4iw_max_read_depth = 8;
 module_param(c4iw_max_read_depth, int, 0644);
 MODULE_PARM_DESC(c4iw_max_read_depth, "Per-connection max ORD/IRD (default=8)");
@@ -469,11 +473,12 @@ static int send_connect(struct c4iw_ep *ep)
 		       __func__);
 		return -ENOMEM;
 	}
-	set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->txq_idx);
+	set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->ctrlq_idx);
 
 	cxgb4_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx);
 	wscale = compute_wscale(rcv_win);
 	opt0 = KEEP_ALIVE(1) |
+	       DELACK(1) |
 	       WND_SCALE(wscale) |
 	       MSS_IDX(mtu_idx) |
 	       L2T_IDX(ep->l2t->idx) |
@@ -780,11 +785,11 @@ static void connect_reply_upcall(struct c4iw_ep *ep, int status)
 		event.private_data_len = ep->plen;
 		event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
 	}
-	if (ep->com.cm_id) {
-		PDBG("%s ep %p tid %u status %d\n", __func__, ep,
-		     ep->hwtid, status);
-		ep->com.cm_id->event_handler(ep->com.cm_id, &event);
-	}
+
+	PDBG("%s ep %p tid %u status %d\n", __func__, ep,
+	     ep->hwtid, status);
+	ep->com.cm_id->event_handler(ep->com.cm_id, &event);
+
 	if (status < 0) {
 		ep->com.cm_id->rem_ref(ep->com.cm_id);
 		ep->com.cm_id = NULL;
@@ -845,8 +850,10 @@ static int update_rx_credits(struct c4iw_ep *ep, u32 credits)
 	INIT_TP_WR(req, ep->hwtid);
 	OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_RX_DATA_ACK,
 						    ep->hwtid));
-	req->credit_dack = cpu_to_be32(credits);
-	set_wr_txq(skb, CPL_PRIORITY_ACK, ep->txq_idx);
+	req->credit_dack = cpu_to_be32(credits | RX_FORCE_ACK(1) |
+				       F_RX_DACK_CHANGE |
+				       V_RX_DACK_MODE(dack_mode));
+	set_wr_txq(skb, CPL_PRIORITY_ACK, ep->ctrlq_idx);
 	c4iw_ofld_send(&ep->com.dev->rdev, skb);
 	return credits;
 }
@@ -1264,6 +1271,7 @@ static void accept_cr(struct c4iw_ep *ep, __be32 peer_ip, struct sk_buff *skb,
 	cxgb4_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx);
 	wscale = compute_wscale(rcv_win);
 	opt0 = KEEP_ALIVE(1) |
+	       DELACK(1) |
 	       WND_SCALE(wscale) |
 	       MSS_IDX(mtu_idx) |
 	       L2T_IDX(ep->l2t->idx) |
@@ -1287,7 +1295,7 @@ static void accept_cr(struct c4iw_ep *ep, __be32 peer_ip, struct sk_buff *skb,
 				      ep->hwtid));
 	rpl->opt0 = cpu_to_be64(opt0);
 	rpl->opt2 = cpu_to_be32(opt2);
-	set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->txq_idx);
+	set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->ctrlq_idx);
 	c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
 
 	return;
@@ -1344,7 +1352,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 	u16 rss_qid;
 	u32 mtu;
 	int step;
-	int txq_idx;
+	int txq_idx, ctrlq_idx;
 
 	parent_ep = lookup_stid(t, stid);
 	PDBG("%s parent ep %p tid %u\n", __func__, parent_ep, hwtid);
@@ -1376,6 +1384,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 		smac_idx = (cxgb4_port_viid(pdev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(pdev) * step;
+		ctrlq_idx = cxgb4_port_idx(pdev);
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
 		rss_qid = dev->rdev.lldi.rxq_ids[cxgb4_port_idx(pdev) * step];
 		dev_put(pdev);
@@ -1387,6 +1396,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 		smac_idx = (cxgb4_port_viid(dst->neighbour->dev) & 0x7F) << 1;
 		step = dev->rdev.lldi.ntxq / dev->rdev.lldi.nchan;
 		txq_idx = cxgb4_port_idx(dst->neighbour->dev) * step;
+		ctrlq_idx = cxgb4_port_idx(dst->neighbour->dev);
 		step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
 		rss_qid = dev->rdev.lldi.rxq_ids[
 			  cxgb4_port_idx(dst->neighbour->dev) * step];
@@ -1426,6 +1436,7 @@ static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
 	child_ep->rss_qid = rss_qid;
 	child_ep->mtu = mtu;
 	child_ep->txq_idx = txq_idx;
+	child_ep->ctrlq_idx = ctrlq_idx;
 
 	PDBG("%s tx_chan %u smac_idx %u rss_qid %u\n", __func__,
 	     tx_chan, smac_idx, rss_qid);
@@ -1473,8 +1484,6 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 	int closing = 0;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(hdr);
-	int start_timer = 0;
-	int stop_timer = 0;
 
 	ep = lookup_tid(t, tid);
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
@@ -1511,7 +1520,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		wake_up(&ep->com.waitq);
 		break;
 	case FPDU_MODE:
-		start_timer = 1;
+		start_ep_timer(ep);
 		__state_set(&ep->com, CLOSING);
 		closing = 1;
 		peer_close_upcall(ep);
@@ -1524,7 +1533,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		disconnect = 0;
 		break;
 	case MORIBUND:
-		stop_timer = 1;
+		stop_ep_timer(ep);
 		if (ep->com.cm_id && ep->com.qp) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
@@ -1547,10 +1556,6 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
 			       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
 	}
-	if (start_timer)
-		start_ep_timer(ep);
-	if (stop_timer)
-		stop_ep_timer(ep);
 	if (disconnect)
 		c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
 	if (release)
@@ -1579,7 +1584,6 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	unsigned long flags;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(req);
-	int stop_timer = 0;
 
 	ep = lookup_tid(t, tid);
 	if (is_neg_adv_abort(req->status)) {
@@ -1594,10 +1598,10 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	case CONNECTING:
 		break;
 	case MPA_REQ_WAIT:
-		stop_timer = 1;
+		stop_ep_timer(ep);
 		break;
 	case MPA_REQ_SENT:
-		stop_timer = 1;
+		stop_ep_timer(ep);
 		connect_reply_upcall(ep, -ECONNRESET);
 		break;
 	case MPA_REP_SENT:
@@ -1621,7 +1625,7 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 		break;
 	case MORIBUND:
 	case CLOSING:
-		stop_timer = 1;
+		stop_ep_timer(ep);
 		/*FALLTHROUGH*/
 	case FPDU_MODE:
 		if (ep->com.cm_id && ep->com.qp) {
@@ -1667,8 +1671,6 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	rpl->cmd = CPL_ABORT_NO_RST;
 	c4iw_ofld_send(&ep->com.dev->rdev, rpl_skb);
 out:
-	if (stop_timer)
-		stop_ep_timer(ep);
 	if (release)
 		release_ep_resources(ep);
 	return 0;
@@ -1683,7 +1685,6 @@ static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 	int release = 0;
 	struct tid_info *t = dev->rdev.lldi.tids;
 	unsigned int tid = GET_TID(rpl);
-	int stop_timer = 0;
 
 	ep = lookup_tid(t, tid);
 
@@ -1697,7 +1698,7 @@ static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 		__state_set(&ep->com, MORIBUND);
 		break;
 	case MORIBUND:
-		stop_timer = 1;
+		stop_ep_timer(ep);
 		if ((ep->com.cm_id) && (ep->com.qp)) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp,
@@ -1717,8 +1718,6 @@ static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 		break;
 	}
 	spin_unlock_irqrestore(&ep->com.lock, flags);
-	if (stop_timer)
-		stop_ep_timer(ep);
 	if (release)
 		release_ep_resources(ep);
 	return 0;
@@ -1957,6 +1956,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		ep->txq_idx = cxgb4_port_idx(pdev) * step;
 		step = ep->com.dev->rdev.lldi.nrxq /
 		       ep->com.dev->rdev.lldi.nchan;
+		ep->ctrlq_idx = cxgb4_port_idx(pdev);
 		ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
 			      cxgb4_port_idx(pdev) * step];
 		dev_put(pdev);
@@ -1971,6 +1971,7 @@ int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		step = ep->com.dev->rdev.lldi.ntxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->txq_idx = cxgb4_port_idx(ep->dst->neighbour->dev) * step;
+		ep->ctrlq_idx = cxgb4_port_idx(ep->dst->neighbour->dev);
 		step = ep->com.dev->rdev.lldi.nrxq /
 		       ep->com.dev->rdev.lldi.nchan;
 		ep->rss_qid = ep->com.dev->rdev.lldi.rxq_ids[
@@ -2049,8 +2050,15 @@ int c4iw_create_listen(struct iw_cm_id *cm_id, int backlog)
 		goto fail3;
 
 	/* wait for pass_open_rpl */
-	wait_event(ep->com.waitq, ep->com.rpl_done);
-	err = ep->com.rpl_err;
+	wait_event_timeout(ep->com.waitq, ep->com.rpl_done, C4IW_WR_TO);
+	if (ep->com.rpl_done)
+		err = ep->com.rpl_err;
+	else {
+		printk(KERN_ERR MOD "Device %s not responding!\n",
+		       pci_name(ep->com.dev->rdev.lldi.pdev));
+		ep->com.dev->rdev.flags = T4_FATAL_ERROR;
+		err = -EIO;
+	}
 	if (!err) {
 		cm_id->provider_data = ep;
 		goto out;
@@ -2079,10 +2087,17 @@ int c4iw_destroy_listen(struct iw_cm_id *cm_id)
 	err = listen_stop(ep);
 	if (err)
 		goto done;
-	wait_event(ep->com.waitq, ep->com.rpl_done);
+	wait_event_timeout(ep->com.waitq, ep->com.rpl_done, C4IW_WR_TO);
+	if (ep->com.rpl_done)
+		err = ep->com.rpl_err;
+	else {
+		printk(KERN_ERR MOD "Device %s not responding!\n",
+		       pci_name(ep->com.dev->rdev.lldi.pdev));
+		ep->com.dev->rdev.flags = T4_FATAL_ERROR;
+		err = -EIO;
+	}
 	cxgb4_free_stid(ep->com.dev->rdev.lldi.tids, ep->stid, PF_INET);
 done:
-	err = ep->com.rpl_err;
 	cm_id->rem_ref(cm_id);
 	c4iw_put_ep(&ep->com);
 	return err;
@@ -2095,8 +2110,6 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 	int close = 0;
 	int fatal = 0;
 	struct c4iw_rdev *rdev;
-	int start_timer = 0;
-	int stop_timer = 0;
 
 	spin_lock_irqsave(&ep->com.lock, flags);
 
@@ -2120,7 +2133,7 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 			ep->com.state = ABORTING;
 		else {
 			ep->com.state = CLOSING;
-			start_timer = 1;
+			start_ep_timer(ep);
 		}
 		set_bit(CLOSE_SENT, &ep->com.flags);
 		break;
@@ -2128,7 +2141,7 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 		if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
 			close = 1;
 			if (abrupt) {
-				stop_timer = 1;
+				stop_ep_timer(ep);
 				ep->com.state = ABORTING;
 			} else
 				ep->com.state = MORIBUND;
@@ -2146,10 +2159,6 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 	}
 
 	spin_unlock_irqrestore(&ep->com.lock, flags);
-	if (start_timer)
-		start_ep_timer(ep);
-	if (stop_timer)
-		stop_ep_timer(ep);
 	if (close) {
 		if (abrupt)
 			ret = abort_connection(ep, NULL, gfp);
@@ -2244,7 +2253,7 @@ static void process_work(struct work_struct *work)
 {
 	struct sk_buff *skb = NULL;
 	struct c4iw_dev *dev;
-	struct cpl_act_establish *rpl = cplhdr(skb);
+	struct cpl_act_establish *rpl;
 	unsigned int opcode;
 	int ret;
 
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index fac5c6e6801..b3daf39eed4 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -43,7 +43,7 @@ static int destroy_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 	int ret;
 
 	wr_len = sizeof *res_wr + sizeof *res;
-	skb = alloc_skb(wr_len, GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(wr_len, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
 	set_wr_txq(skb, CPL_PRIORITY_CONTROL, 0);
@@ -118,7 +118,7 @@ static int create_cq(struct c4iw_rdev *rdev, struct t4_cq *cq,
 	/* build fw_ri_res_wr */
 	wr_len = sizeof *res_wr + sizeof *res;
 
-	skb = alloc_skb(wr_len, GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(wr_len, GFP_KERNEL);
 	if (!skb) {
 		ret = -ENOMEM;
 		goto err4;
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index d33e1a66881..ed459b8f800 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -619,6 +619,7 @@ struct c4iw_ep {
 	u16 plen;
 	u16 rss_qid;
 	u16 txq_idx;
+	u16 ctrlq_idx;
 	u8 tos;
 };
 
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 82b5703b894..269373a62f2 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -59,7 +59,7 @@ static int write_adapter_mem(struct c4iw_rdev *rdev, u32 addr, u32 len,
 		wr_len = roundup(sizeof *req + sizeof *sc +
 				 roundup(copy_len, T4_ULPTX_MIN_IO), 16);
 
-		skb = alloc_skb(wr_len, GFP_KERNEL | __GFP_NOFAIL);
+		skb = alloc_skb(wr_len, GFP_KERNEL);
 		if (!skb)
 			return -ENOMEM;
 		set_wr_txq(skb, CPL_PRIORITY_CONTROL, 0);
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 86b93f2ecca..93f6e5bf0ec 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -130,7 +130,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	/* build fw_ri_res_wr */
 	wr_len = sizeof *res_wr + 2 * sizeof *res;
 
-	skb = alloc_skb(wr_len, GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(wr_len, GFP_KERNEL);
 	if (!skb) {
 		ret = -ENOMEM;
 		goto err7;
@@ -162,7 +162,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
 		V_FW_RI_RES_WR_DCAEN(0) |
 		V_FW_RI_RES_WR_DCACPU(0) |
-		V_FW_RI_RES_WR_FBMIN(3) |
+		V_FW_RI_RES_WR_FBMIN(2) |
 		V_FW_RI_RES_WR_FBMAX(3) |
 		V_FW_RI_RES_WR_CIDXFTHRESHO(0) |
 		V_FW_RI_RES_WR_CIDXFTHRESH(0) |
@@ -185,7 +185,7 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	res->u.sqrq.dcaen_to_eqsize = cpu_to_be32(
 		V_FW_RI_RES_WR_DCAEN(0) |
 		V_FW_RI_RES_WR_DCACPU(0) |
-		V_FW_RI_RES_WR_FBMIN(3) |
+		V_FW_RI_RES_WR_FBMIN(2) |
 		V_FW_RI_RES_WR_FBMAX(3) |
 		V_FW_RI_RES_WR_CIDXFTHRESHO(0) |
 		V_FW_RI_RES_WR_CIDXFTHRESH(0) |
@@ -235,12 +235,78 @@ err1:
 	return -ENOMEM;
 }
 
-static int build_rdma_send(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
+static int build_immd(struct t4_sq *sq, struct fw_ri_immd *immdp,
+		      struct ib_send_wr *wr, int max, u32 *plenp)
 {
+	u8 *dstp, *srcp;
+	u32 plen = 0;
 	int i;
+	int rem, len;
+
+	dstp = (u8 *)immdp->data;
+	for (i = 0; i < wr->num_sge; i++) {
+		if ((plen + wr->sg_list[i].length) > max)
+			return -EMSGSIZE;
+		srcp = (u8 *)(unsigned long)wr->sg_list[i].addr;
+		plen += wr->sg_list[i].length;
+		rem = wr->sg_list[i].length;
+		while (rem) {
+			if (dstp == (u8 *)&sq->queue[sq->size])
+				dstp = (u8 *)sq->queue;
+			if (rem <= (u8 *)&sq->queue[sq->size] - dstp)
+				len = rem;
+			else
+				len = (u8 *)&sq->queue[sq->size] - dstp;
+			memcpy(dstp, srcp, len);
+			dstp += len;
+			srcp += len;
+			rem -= len;
+		}
+	}
+	immdp->op = FW_RI_DATA_IMMD;
+	immdp->r1 = 0;
+	immdp->r2 = 0;
+	immdp->immdlen = cpu_to_be32(plen);
+	*plenp = plen;
+	return 0;
+}
+
+static int build_isgl(__be64 *queue_start, __be64 *queue_end,
+		      struct fw_ri_isgl *isglp, struct ib_sge *sg_list,
+		      int num_sge, u32 *plenp)
+
+{
+	int i;
+	u32 plen = 0;
+	__be64 *flitp = (__be64 *)isglp->sge;
+
+	for (i = 0; i < num_sge; i++) {
+		if ((plen + sg_list[i].length) < plen)
+			return -EMSGSIZE;
+		plen += sg_list[i].length;
+		*flitp = cpu_to_be64(((u64)sg_list[i].lkey << 32) |
+				     sg_list[i].length);
+		if (++flitp == queue_end)
+			flitp = queue_start;
+		*flitp = cpu_to_be64(sg_list[i].addr);
+		if (++flitp == queue_end)
+			flitp = queue_start;
+	}
+	isglp->op = FW_RI_DATA_ISGL;
+	isglp->r1 = 0;
+	isglp->nsge = cpu_to_be16(num_sge);
+	isglp->r2 = 0;
+	if (plenp)
+		*plenp = plen;
+	return 0;
+}
+
+static int build_rdma_send(struct t4_sq *sq, union t4_wr *wqe,
+			   struct ib_send_wr *wr, u8 *len16)
+{
 	u32 plen;
 	int size;
-	u8 *datap;
+	int ret;
 
 	if (wr->num_sge > T4_MAX_SEND_SGE)
 		return -EINVAL;
@@ -267,43 +333,23 @@ static int build_rdma_send(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
 	default:
 		return -EINVAL;
 	}
+
 	plen = 0;
 	if (wr->num_sge) {
 		if (wr->send_flags & IB_SEND_INLINE) {
-			datap = (u8 *)wqe->send.u.immd_src[0].data;
-			for (i = 0; i < wr->num_sge; i++) {
-				if ((plen + wr->sg_list[i].length) >
-				    T4_MAX_SEND_INLINE) {
-					return -EMSGSIZE;
-				}
-				plen += wr->sg_list[i].length;
-				memcpy(datap,
-				     (void *)(unsigned long)wr->sg_list[i].addr,
-				     wr->sg_list[i].length);
-				datap += wr->sg_list[i].length;
-			}
-			wqe->send.u.immd_src[0].op = FW_RI_DATA_IMMD;
-			wqe->send.u.immd_src[0].r1 = 0;
-			wqe->send.u.immd_src[0].r2 = 0;
-			wqe->send.u.immd_src[0].immdlen = cpu_to_be32(plen);
+			ret = build_immd(sq, wqe->send.u.immd_src, wr,
+					 T4_MAX_SEND_INLINE, &plen);
+			if (ret)
+				return ret;
 			size = sizeof wqe->send + sizeof(struct fw_ri_immd) +
 			       plen;
 		} else {
-			for (i = 0; i < wr->num_sge; i++) {
-				if ((plen + wr->sg_list[i].length) < plen)
-					return -EMSGSIZE;
-				plen += wr->sg_list[i].length;
-				wqe->send.u.isgl_src[0].sge[i].stag =
-					cpu_to_be32(wr->sg_list[i].lkey);
-				wqe->send.u.isgl_src[0].sge[i].len =
-					cpu_to_be32(wr->sg_list[i].length);
-				wqe->send.u.isgl_src[0].sge[i].to =
-					cpu_to_be64(wr->sg_list[i].addr);
-			}
-			wqe->send.u.isgl_src[0].op = FW_RI_DATA_ISGL;
-			wqe->send.u.isgl_src[0].r1 = 0;
-			wqe->send.u.isgl_src[0].nsge = cpu_to_be16(wr->num_sge);
-			wqe->send.u.isgl_src[0].r2 = 0;
+			ret = build_isgl((__be64 *)sq->queue,
+					 (__be64 *)&sq->queue[sq->size],
+					 wqe->send.u.isgl_src,
+					 wr->sg_list, wr->num_sge, &plen);
+			if (ret)
+				return ret;
 			size = sizeof wqe->send + sizeof(struct fw_ri_isgl) +
 			       wr->num_sge * sizeof(struct fw_ri_sge);
 		}
@@ -313,62 +359,40 @@ static int build_rdma_send(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
 		wqe->send.u.immd_src[0].r2 = 0;
 		wqe->send.u.immd_src[0].immdlen = 0;
 		size = sizeof wqe->send + sizeof(struct fw_ri_immd);
+		plen = 0;
 	}
 	*len16 = DIV_ROUND_UP(size, 16);
 	wqe->send.plen = cpu_to_be32(plen);
 	return 0;
 }
 
-static int build_rdma_write(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
+static int build_rdma_write(struct t4_sq *sq, union t4_wr *wqe,
+			    struct ib_send_wr *wr, u8 *len16)
 {
-	int i;
 	u32 plen;
 	int size;
-	u8 *datap;
+	int ret;
 
-	if (wr->num_sge > T4_MAX_WRITE_SGE)
+	if (wr->num_sge > T4_MAX_SEND_SGE)
 		return -EINVAL;
 	wqe->write.r2 = 0;
 	wqe->write.stag_sink = cpu_to_be32(wr->wr.rdma.rkey);
 	wqe->write.to_sink = cpu_to_be64(wr->wr.rdma.remote_addr);
-	plen = 0;
 	if (wr->num_sge) {
 		if (wr->send_flags & IB_SEND_INLINE) {
-			datap = (u8 *)wqe->write.u.immd_src[0].data;
-			for (i = 0; i < wr->num_sge; i++) {
-				if ((plen + wr->sg_list[i].length) >
-				    T4_MAX_WRITE_INLINE) {
-					return -EMSGSIZE;
-				}
-				plen += wr->sg_list[i].length;
-				memcpy(datap,
-				     (void *)(unsigned long)wr->sg_list[i].addr,
-				     wr->sg_list[i].length);
-				datap += wr->sg_list[i].length;
-			}
-			wqe->write.u.immd_src[0].op = FW_RI_DATA_IMMD;
-			wqe->write.u.immd_src[0].r1 = 0;
-			wqe->write.u.immd_src[0].r2 = 0;
-			wqe->write.u.immd_src[0].immdlen = cpu_to_be32(plen);
+			ret = build_immd(sq, wqe->write.u.immd_src, wr,
+					 T4_MAX_WRITE_INLINE, &plen);
+			if (ret)
+				return ret;
 			size = sizeof wqe->write + sizeof(struct fw_ri_immd) +
 			       plen;
 		} else {
-			for (i = 0; i < wr->num_sge; i++) {
-				if ((plen + wr->sg_list[i].length) < plen)
-					return -EMSGSIZE;
-				plen += wr->sg_list[i].length;
-				wqe->write.u.isgl_src[0].sge[i].stag =
-					cpu_to_be32(wr->sg_list[i].lkey);
-				wqe->write.u.isgl_src[0].sge[i].len =
-					cpu_to_be32(wr->sg_list[i].length);
-				wqe->write.u.isgl_src[0].sge[i].to =
-					cpu_to_be64(wr->sg_list[i].addr);
-			}
-			wqe->write.u.isgl_src[0].op = FW_RI_DATA_ISGL;
-			wqe->write.u.isgl_src[0].r1 = 0;
-			wqe->write.u.isgl_src[0].nsge =
-						       cpu_to_be16(wr->num_sge);
-			wqe->write.u.isgl_src[0].r2 = 0;
+			ret = build_isgl((__be64 *)sq->queue,
+					 (__be64 *)&sq->queue[sq->size],
+					 wqe->write.u.isgl_src,
+					 wr->sg_list, wr->num_sge, &plen);
+			if (ret)
+				return ret;
 			size = sizeof wqe->write + sizeof(struct fw_ri_isgl) +
 			       wr->num_sge * sizeof(struct fw_ri_sge);
 		}
@@ -378,6 +402,7 @@ static int build_rdma_write(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
 		wqe->write.u.immd_src[0].r2 = 0;
 		wqe->write.u.immd_src[0].immdlen = 0;
 		size = sizeof wqe->write + sizeof(struct fw_ri_immd);
+		plen = 0;
 	}
 	*len16 = DIV_ROUND_UP(size, 16);
 	wqe->write.plen = cpu_to_be32(plen);
@@ -416,29 +441,13 @@ static int build_rdma_read(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16)
 static int build_rdma_recv(struct c4iw_qp *qhp, union t4_recv_wr *wqe,
 			   struct ib_recv_wr *wr, u8 *len16)
 {
-	int i;
-	int plen = 0;
+	int ret;
 
-	for (i = 0; i < wr->num_sge; i++) {
-		if ((plen + wr->sg_list[i].length) < plen)
-			return -EMSGSIZE;
-		plen += wr->sg_list[i].length;
-		wqe->recv.isgl.sge[i].stag =
-			cpu_to_be32(wr->sg_list[i].lkey);
-		wqe->recv.isgl.sge[i].len =
-			cpu_to_be32(wr->sg_list[i].length);
-		wqe->recv.isgl.sge[i].to =
-			cpu_to_be64(wr->sg_list[i].addr);
-	}
-	for (; i < T4_MAX_RECV_SGE; i++) {
-		wqe->recv.isgl.sge[i].stag = 0;
-		wqe->recv.isgl.sge[i].len = 0;
-		wqe->recv.isgl.sge[i].to = 0;
-	}
-	wqe->recv.isgl.op = FW_RI_DATA_ISGL;
-	wqe->recv.isgl.r1 = 0;
-	wqe->recv.isgl.nsge = cpu_to_be16(wr->num_sge);
-	wqe->recv.isgl.r2 = 0;
+	ret = build_isgl((__be64 *)qhp->wq.rq.queue,
+			 (__be64 *)&qhp->wq.rq.queue[qhp->wq.rq.size],
+			 &wqe->recv.isgl, wr->sg_list, wr->num_sge, NULL);
+	if (ret)
+		return ret;
 	*len16 = DIV_ROUND_UP(sizeof wqe->recv +
 			      wr->num_sge * sizeof(struct fw_ri_sge), 16);
 	return 0;
@@ -547,7 +556,9 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			*bad_wr = wr;
 			break;
 		}
-		wqe = &qhp->wq.sq.queue[qhp->wq.sq.pidx];
+		wqe = (union t4_wr *)((u8 *)qhp->wq.sq.queue +
+		      qhp->wq.sq.wq_pidx * T4_EQ_ENTRY_SIZE);
+
 		fw_flags = 0;
 		if (wr->send_flags & IB_SEND_SOLICITED)
 			fw_flags |= FW_RI_SOLICITED_EVENT_FLAG;
@@ -564,12 +575,12 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 				swsqe->opcode = FW_RI_SEND;
 			else
 				swsqe->opcode = FW_RI_SEND_WITH_INV;
-			err = build_rdma_send(wqe, wr, &len16);
+			err = build_rdma_send(&qhp->wq.sq, wqe, wr, &len16);
 			break;
 		case IB_WR_RDMA_WRITE:
 			fw_opcode = FW_RI_RDMA_WRITE_WR;
 			swsqe->opcode = FW_RI_RDMA_WRITE;
-			err = build_rdma_write(wqe, wr, &len16);
+			err = build_rdma_write(&qhp->wq.sq, wqe, wr, &len16);
 			break;
 		case IB_WR_RDMA_READ:
 		case IB_WR_RDMA_READ_WITH_INV:
@@ -619,8 +630,8 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		     swsqe->opcode, swsqe->read_len);
 		wr = wr->next;
 		num_wrs--;
-		t4_sq_produce(&qhp->wq);
-		idx++;
+		t4_sq_produce(&qhp->wq, len16);
+		idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
 	}
 	if (t4_wq_db_enabled(&qhp->wq))
 		t4_ring_sq_db(&qhp->wq, idx);
@@ -656,7 +667,9 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 			*bad_wr = wr;
 			break;
 		}
-		wqe = &qhp->wq.rq.queue[qhp->wq.rq.pidx];
+		wqe = (union t4_recv_wr *)((u8 *)qhp->wq.rq.queue +
+					   qhp->wq.rq.wq_pidx *
+					   T4_EQ_ENTRY_SIZE);
 		if (num_wrs)
 			err = build_rdma_recv(qhp, wqe, wr, &len16);
 		else
@@ -675,15 +688,12 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		wqe->recv.r2[1] = 0;
 		wqe->recv.r2[2] = 0;
 		wqe->recv.len16 = len16;
-		if (len16 < 5)
-			wqe->flits[8] = 0;
-
 		PDBG("%s cookie 0x%llx pidx %u\n", __func__,
 		     (unsigned long long) wr->wr_id, qhp->wq.rq.pidx);
-		t4_rq_produce(&qhp->wq);
+		t4_rq_produce(&qhp->wq, len16);
+		idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
 		wr = wr->next;
 		num_wrs--;
-		idx++;
 	}
 	if (t4_wq_db_enabled(&qhp->wq))
 		t4_ring_rq_db(&qhp->wq, idx);
@@ -951,7 +961,8 @@ static void flush_qp(struct c4iw_qp *qhp, unsigned long *flag)
 	__flush_qp(qhp, rchp, schp, flag);
 }
 
-static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp)
+static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
+		     struct c4iw_ep *ep)
 {
 	struct fw_ri_wr *wqe;
 	int ret;
@@ -959,12 +970,12 @@ static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp)
 	struct sk_buff *skb;
 
 	PDBG("%s qhp %p qid 0x%x tid %u\n", __func__, qhp, qhp->wq.sq.qid,
-	     qhp->ep->hwtid);
+	     ep->hwtid);
 
-	skb = alloc_skb(sizeof *wqe, GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof *wqe, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
-	set_wr_txq(skb, CPL_PRIORITY_DATA, qhp->ep->txq_idx);
+	set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
 
 	wqe = (struct fw_ri_wr *)__skb_put(skb, sizeof(*wqe));
 	memset(wqe, 0, sizeof *wqe);
@@ -972,7 +983,7 @@ static int rdma_fini(struct c4iw_dev *rhp, struct c4iw_qp *qhp)
 		FW_WR_OP(FW_RI_INIT_WR) |
 		FW_WR_COMPL(1));
 	wqe->flowid_len16 = cpu_to_be32(
-		FW_WR_FLOWID(qhp->ep->hwtid) |
+		FW_WR_FLOWID(ep->hwtid) |
 		FW_WR_LEN16(DIV_ROUND_UP(sizeof *wqe, 16)));
 	wqe->cookie = (u64)&wr_wait;
 
@@ -1035,7 +1046,7 @@ static int rdma_init(struct c4iw_dev *rhp, struct c4iw_qp *qhp)
 	PDBG("%s qhp %p qid 0x%x tid %u\n", __func__, qhp, qhp->wq.sq.qid,
 	     qhp->ep->hwtid);
 
-	skb = alloc_skb(sizeof *wqe, GFP_KERNEL | __GFP_NOFAIL);
+	skb = alloc_skb(sizeof *wqe, GFP_KERNEL);
 	if (!skb)
 		return -ENOMEM;
 	set_wr_txq(skb, CPL_PRIORITY_DATA, qhp->ep->txq_idx);
@@ -1202,17 +1213,16 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 		case C4IW_QP_STATE_CLOSING:
 			BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2);
 			qhp->attr.state = C4IW_QP_STATE_CLOSING;
+			ep = qhp->ep;
 			if (!internal) {
 				abort = 0;
 				disconnect = 1;
-				ep = qhp->ep;
 				c4iw_get_ep(&ep->com);
 			}
 			spin_unlock_irqrestore(&qhp->lock, flag);
-			ret = rdma_fini(rhp, qhp);
+			ret = rdma_fini(rhp, qhp, ep);
 			spin_lock_irqsave(&qhp->lock, flag);
 			if (ret) {
-				ep = qhp->ep;
 				c4iw_get_ep(&ep->com);
 				disconnect = abort = 1;
 				goto err;
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index 9cf8d85bfcf..aef55f42bea 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -65,10 +65,10 @@ struct t4_status_page {
 	u8 db_off;
 };
 
-#define T4_EQ_SIZE 64
+#define T4_EQ_ENTRY_SIZE 64
 
 #define T4_SQ_NUM_SLOTS 4
-#define T4_SQ_NUM_BYTES (T4_EQ_SIZE * T4_SQ_NUM_SLOTS)
+#define T4_SQ_NUM_BYTES (T4_EQ_ENTRY_SIZE * T4_SQ_NUM_SLOTS)
 #define T4_MAX_SEND_SGE ((T4_SQ_NUM_BYTES - sizeof(struct fw_ri_send_wr) - \
 			sizeof(struct fw_ri_isgl)) / sizeof(struct fw_ri_sge))
 #define T4_MAX_SEND_INLINE ((T4_SQ_NUM_BYTES - sizeof(struct fw_ri_send_wr) - \
@@ -84,7 +84,7 @@ struct t4_status_page {
 #define T4_MAX_FR_DEPTH (T4_MAX_FR_IMMD / sizeof(u64))
 
 #define T4_RQ_NUM_SLOTS 2
-#define T4_RQ_NUM_BYTES (T4_EQ_SIZE * T4_RQ_NUM_SLOTS)
+#define T4_RQ_NUM_BYTES (T4_EQ_ENTRY_SIZE * T4_RQ_NUM_SLOTS)
 #define T4_MAX_RECV_SGE 4
 
 union t4_wr {
@@ -97,20 +97,18 @@ union t4_wr {
 	struct fw_ri_fr_nsmr_wr fr;
 	struct fw_ri_inv_lstag_wr inv;
 	struct t4_status_page status;
-	__be64 flits[T4_EQ_SIZE / sizeof(__be64) * T4_SQ_NUM_SLOTS];
+	__be64 flits[T4_EQ_ENTRY_SIZE / sizeof(__be64) * T4_SQ_NUM_SLOTS];
 };
 
 union t4_recv_wr {
 	struct fw_ri_recv_wr recv;
 	struct t4_status_page status;
-	__be64 flits[T4_EQ_SIZE / sizeof(__be64) * T4_RQ_NUM_SLOTS];
+	__be64 flits[T4_EQ_ENTRY_SIZE / sizeof(__be64) * T4_RQ_NUM_SLOTS];
 };
 
 static inline void init_wr_hdr(union t4_wr *wqe, u16 wrid,
 			       enum fw_wr_opcodes opcode, u8 flags, u8 len16)
 {
-	int slots_used;
-
 	wqe->send.opcode = (u8)opcode;
 	wqe->send.flags = flags;
 	wqe->send.wrid = wrid;
@@ -118,12 +116,6 @@ static inline void init_wr_hdr(union t4_wr *wqe, u16 wrid,
 	wqe->send.r1[1] = 0;
 	wqe->send.r1[2] = 0;
 	wqe->send.len16 = len16;
-
-	slots_used = DIV_ROUND_UP(len16*16, T4_EQ_SIZE);
-	while (slots_used < T4_SQ_NUM_SLOTS) {
-		wqe->flits[slots_used * T4_EQ_SIZE / sizeof(__be64)] = 0;
-		slots_used++;
-	}
 }
 
 /* CQE/AE status codes */
@@ -289,6 +281,7 @@ struct t4_sq {
 	u16 size;
 	u16 cidx;
 	u16 pidx;
+	u16 wq_pidx;
 };
 
 struct t4_swrqe {
@@ -310,6 +303,7 @@ struct t4_rq {
 	u16 size;
 	u16 cidx;
 	u16 pidx;
+	u16 wq_pidx;
 };
 
 struct t4_wq {
@@ -340,11 +334,14 @@ static inline u32 t4_rq_avail(struct t4_wq *wq)
 	return wq->rq.size - 1 - wq->rq.in_use;
 }
 
-static inline void t4_rq_produce(struct t4_wq *wq)
+static inline void t4_rq_produce(struct t4_wq *wq, u8 len16)
 {
 	wq->rq.in_use++;
 	if (++wq->rq.pidx == wq->rq.size)
 		wq->rq.pidx = 0;
+	wq->rq.wq_pidx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
+	if (wq->rq.wq_pidx >= wq->rq.size * T4_RQ_NUM_SLOTS)
+		wq->rq.wq_pidx %= wq->rq.size * T4_RQ_NUM_SLOTS;
 }
 
 static inline void t4_rq_consume(struct t4_wq *wq)
@@ -370,11 +367,14 @@ static inline u32 t4_sq_avail(struct t4_wq *wq)
 	return wq->sq.size - 1 - wq->sq.in_use;
 }
 
-static inline void t4_sq_produce(struct t4_wq *wq)
+static inline void t4_sq_produce(struct t4_wq *wq, u8 len16)
 {
 	wq->sq.in_use++;
 	if (++wq->sq.pidx == wq->sq.size)
 		wq->sq.pidx = 0;
+	wq->sq.wq_pidx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
+	if (wq->sq.wq_pidx >= wq->sq.size * T4_SQ_NUM_SLOTS)
+		wq->sq.wq_pidx %= wq->sq.size * T4_SQ_NUM_SLOTS;
 }
 
 static inline void t4_sq_consume(struct t4_wq *wq)
@@ -386,14 +386,12 @@ static inline void t4_sq_consume(struct t4_wq *wq)
 
 static inline void t4_ring_sq_db(struct t4_wq *wq, u16 inc)
 {
-	inc *= T4_SQ_NUM_SLOTS;
 	wmb();
 	writel(QID(wq->sq.qid) | PIDX(inc), wq->db);
 }
 
 static inline void t4_ring_rq_db(struct t4_wq *wq, u16 inc)
 {
-	inc *= T4_RQ_NUM_SLOTS;
 	wmb();
 	writel(QID(wq->rq.qid) | PIDX(inc), wq->db);
 }
diff --git a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
index fc706bd07fa..dc193c29267 100644
--- a/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
+++ b/drivers/infiniband/hw/cxgb4/t4fw_ri_api.h
@@ -826,4 +826,14 @@ struct ulptx_idata {
 #define S_ULPTX_NSGE    0
 #define M_ULPTX_NSGE    0xFFFF
 #define V_ULPTX_NSGE(x) ((x) << S_ULPTX_NSGE)
+
+#define S_RX_DACK_MODE    29
+#define M_RX_DACK_MODE    0x3
+#define V_RX_DACK_MODE(x) ((x) << S_RX_DACK_MODE)
+#define G_RX_DACK_MODE(x) (((x) >> S_RX_DACK_MODE) & M_RX_DACK_MODE)
+
+#define S_RX_DACK_CHANGE    31
+#define V_RX_DACK_CHANGE(x) ((x) << S_RX_DACK_CHANGE)
+#define F_RX_DACK_CHANGE    V_RX_DACK_CHANGE(1U)
+
 #endif /* _T4FW_RI_API_H_ */
diff --git a/drivers/infiniband/hw/ehca/ehca_eq.c b/drivers/infiniband/hw/ehca/ehca_eq.c
index 3b87589b8ea..d9b1bb40f48 100644
--- a/drivers/infiniband/hw/ehca/ehca_eq.c
+++ b/drivers/infiniband/hw/ehca/ehca_eq.c
@@ -122,21 +122,21 @@ int ehca_create_eq(struct ehca_shca *shca,
 
 	/* register interrupt handlers and initialize work queues */
 	if (type == EHCA_EQ) {
+		tasklet_init(&eq->interrupt_task, ehca_tasklet_eq, (long)shca);
+
 		ret = ibmebus_request_irq(eq->ist, ehca_interrupt_eq,
 					  IRQF_DISABLED, "ehca_eq",
 					  (void *)shca);
 		if (ret < 0)
 			ehca_err(ib_dev, "Can't map interrupt handler.");
-
-		tasklet_init(&eq->interrupt_task, ehca_tasklet_eq, (long)shca);
 	} else if (type == EHCA_NEQ) {
+		tasklet_init(&eq->interrupt_task, ehca_tasklet_neq, (long)shca);
+
 		ret = ibmebus_request_irq(eq->ist, ehca_interrupt_neq,
 					  IRQF_DISABLED, "ehca_neq",
 					  (void *)shca);
 		if (ret < 0)
 			ehca_err(ib_dev, "Can't map interrupt handler.");
-
-		tasklet_init(&eq->interrupt_task, ehca_tasklet_neq, (long)shca);
 	}
 
 	eq->is_initialized = 1;
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index ecb51b396c4..cfc4de7a5da 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -360,7 +360,8 @@ static int ehca_sense_attributes(struct ehca_shca *shca)
 	 * a firmware property, so it's valid across all adapters
 	 */
 	if (ehca_lock_hcalls == -1)
-		ehca_lock_hcalls = !(shca->hca_cap & HCA_CAP_H_ALLOC_RES_SYNC);
+		ehca_lock_hcalls = !EHCA_BMASK_GET(HCA_CAP_H_ALLOC_RES_SYNC,
+					shca->hca_cap);
 
 	/* translate supported MR page sizes; always support 4K */
 	shca->hca_cap_mr_pgsize = EHCA_PAGESIZE;
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index 31a68b9c52d..53f4cd4fc19 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -933,11 +933,6 @@ int ehca_unmap_fmr(struct list_head *fmr_list)
 	/* check all FMR belong to same SHCA, and check internal flag */
 	list_for_each_entry(ib_fmr, fmr_list, list) {
 		prev_shca = shca;
-		if (!ib_fmr) {
-			ehca_gen_err("bad fmr=%p in list", ib_fmr);
-			ret = -EINVAL;
-			goto unmap_fmr_exit0;
-		}
 		shca = container_of(ib_fmr->device, struct ehca_shca,
 				    ib_device);
 		e_fmr = container_of(ib_fmr, struct ehca_mr, ib.ib_fmr);
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 47d388ec1cd..32fb34201ab 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -251,7 +251,7 @@ static inline int ibqptype2servicetype(enum ib_qp_type ibqptype)
 		return ST_UD;
 	case IB_QPT_RAW_IPV6:
 		return -EINVAL;
-	case IB_QPT_RAW_ETY:
+	case IB_QPT_RAW_ETHERTYPE:
 		return -EINVAL;
 	default:
 		ehca_gen_err("Invalid ibqptype=%x", ibqptype);
diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c
index 4d5dc3304d4..e6f9cdd94c7 100644
--- a/drivers/infiniband/hw/ehca/hcp_if.c
+++ b/drivers/infiniband/hw/ehca/hcp_if.c
@@ -269,6 +269,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 			     struct ehca_cq *cq,
 			     struct ehca_alloc_cq_parms *param)
 {
+	int rc;
 	u64 ret;
 	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
 
@@ -283,8 +284,19 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 	param->act_nr_of_entries = (u32)outs[3];
 	param->act_pages = (u32)outs[4];
 
-	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&cq->galpas, 0, outs[5], outs[6]);
+	if (ret == H_SUCCESS) {
+		rc = hcp_galpas_ctor(&cq->galpas, 0, outs[5], outs[6]);
+		if (rc) {
+			ehca_gen_err("Could not establish HW access. rc=%d paddr=%#lx",
+				     rc, outs[5]);
+
+			ehca_plpar_hcall_norets(H_FREE_RESOURCE,
+						adapter_handle.handle,     /* r4 */
+						cq->ipz_cq_handle.handle,  /* r5 */
+						0, 0, 0, 0, 0);
+			ret = H_NO_MEM;
+		}
+	}
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
@@ -295,6 +307,7 @@ u64 hipz_h_alloc_resource_cq(const struct ipz_adapter_handle adapter_handle,
 u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 			     struct ehca_alloc_qp_parms *parms, int is_user)
 {
+	int rc;
 	u64 ret;
 	u64 allocate_controls, max_r10_reg, r11, r12;
 	unsigned long outs[PLPAR_HCALL9_BUFSIZE];
@@ -358,8 +371,19 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle,
 	parms->rqueue.queue_size =
 		(u32)EHCA_BMASK_GET(H_ALL_RES_QP_RQUEUE_SIZE_PAGES, outs[4]);
 
-	if (ret == H_SUCCESS)
-		hcp_galpas_ctor(&parms->galpas, is_user, outs[6], outs[6]);
+	if (ret == H_SUCCESS) {
+		rc = hcp_galpas_ctor(&parms->galpas, is_user, outs[6], outs[6]);
+		if (rc) {
+			ehca_gen_err("Could not establish HW access. rc=%d paddr=%#lx",
+				     rc, outs[6]);
+
+			ehca_plpar_hcall_norets(H_FREE_RESOURCE,
+						adapter_handle.handle,     /* r4 */
+						parms->qp_handle.handle,  /* r5 */
+						0, 0, 0, 0, 0);
+			ret = H_NO_MEM;
+		}
+	}
 
 	if (ret == H_NOT_ENOUGH_RESOURCES)
 		ehca_gen_err("Not enough resources. ret=%lli", ret);
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.c b/drivers/infiniband/hw/ehca/hcp_phyp.c
index b3e0e72e8a7..077376ff3d2 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.c
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.c
@@ -42,10 +42,9 @@
 #include "ehca_classes.h"
 #include "hipz_hw.h"
 
-int hcall_map_page(u64 physaddr, u64 *mapaddr)
+u64 hcall_map_page(u64 physaddr)
 {
-	*mapaddr = (u64)(ioremap(physaddr, EHCA_PAGESIZE));
-	return 0;
+	return (u64)ioremap(physaddr, EHCA_PAGESIZE);
 }
 
 int hcall_unmap_page(u64 mapaddr)
@@ -58,9 +57,9 @@ int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 		    u64 paddr_kernel, u64 paddr_user)
 {
 	if (!is_user) {
-		int ret = hcall_map_page(paddr_kernel, &galpas->kernel.fw_handle);
-		if (ret)
-			return ret;
+		galpas->kernel.fw_handle = hcall_map_page(paddr_kernel);
+		if (!galpas->kernel.fw_handle)
+			return -ENOMEM;
 	} else
 		galpas->kernel.fw_handle = 0;
 
diff --git a/drivers/infiniband/hw/ehca/hcp_phyp.h b/drivers/infiniband/hw/ehca/hcp_phyp.h
index 204227d5303..d1b02991024 100644
--- a/drivers/infiniband/hw/ehca/hcp_phyp.h
+++ b/drivers/infiniband/hw/ehca/hcp_phyp.h
@@ -83,7 +83,7 @@ int hcp_galpas_ctor(struct h_galpas *galpas, int is_user,
 
 int hcp_galpas_dtor(struct h_galpas *galpas);
 
-int hcall_map_page(u64 physaddr, u64 * mapaddr);
+u64 hcall_map_page(u64 physaddr);
 
 int hcall_unmap_page(u64 mapaddr);
 
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 21337468c65..765f0fc1da7 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -390,6 +390,8 @@ done:
 	ipath_enable_armlaunch(dd);
 }
 
+static void cleanup_device(struct ipath_devdata *dd);
+
 static int __devinit ipath_init_one(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
 {
@@ -616,8 +618,13 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	goto bail;
 
 bail_irqsetup:
-	if (pdev->irq)
-		free_irq(pdev->irq, dd);
+	cleanup_device(dd);
+
+	if (dd->ipath_irq)
+		dd->ipath_f_free_irq(dd);
+
+	if (dd->ipath_f_cleanup)
+		dd->ipath_f_cleanup(dd);
 
 bail_iounmap:
 	iounmap((volatile void __iomem *) dd->ipath_kregbase);
@@ -635,7 +642,7 @@ bail:
 	return ret;
 }
 
-static void __devexit cleanup_device(struct ipath_devdata *dd)
+static void cleanup_device(struct ipath_devdata *dd)
 {
 	int port;
 	struct ipath_portdata **tmp;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 3603ae89b60..f4ceecd9684 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -1817,7 +1817,7 @@ int mthca_CONF_SPECIAL_QP(struct mthca_dev *dev, int type, u32 qpn,
 	case IB_QPT_RAW_IPV6:
 		op_mod = 2;
 		break;
-	case IB_QPT_RAW_ETY:
+	case IB_QPT_RAW_ETHERTYPE:
 		op_mod = 3;
 		break;
 	default:
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index de7b9d7166f..0c9f0aa5d4e 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -110,8 +110,8 @@ static unsigned int sysfs_nonidx_addr;
 static unsigned int sysfs_idx_addr;
 
 static struct pci_device_id nes_pci_table[] = {
-	{PCI_VENDOR_ID_NETEFFECT, PCI_DEVICE_ID_NETEFFECT_NE020, PCI_ANY_ID, PCI_ANY_ID},
-	{PCI_VENDOR_ID_NETEFFECT, PCI_DEVICE_ID_NETEFFECT_NE020_KR, PCI_ANY_ID, PCI_ANY_ID},
+	{ PCI_VDEVICE(NETEFFECT, PCI_DEVICE_ID_NETEFFECT_NE020), },
+	{ PCI_VDEVICE(NETEFFECT, PCI_DEVICE_ID_NETEFFECT_NE020_KR), },
 	{0}
 };
 
@@ -259,13 +259,11 @@ static void nes_cqp_rem_ref_callback(struct nes_device *nesdev, struct nes_cqp_r
 	unsigned long flags;
 	struct nes_qp *nesqp = cqp_request->cqp_callback_pointer;
 	struct nes_adapter *nesadapter = nesdev->nesadapter;
-	u32 qp_id;
 
 	atomic_inc(&qps_destroyed);
 
 	/* Free the control structures */
 
-	qp_id = nesqp->hwqp.qp_id;
 	if (nesqp->pbl_vbase) {
 		pci_free_consistent(nesdev->pcidev, nesqp->qp_mem_size,
 				nesqp->hwqp.q2_vbase, nesqp->hwqp.q2_pbase);
@@ -441,7 +439,6 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
 	struct net_device *netdev = NULL;
 	struct nes_device *nesdev = NULL;
 	int ret = 0;
-	struct nes_vnic *nesvnic = NULL;
 	void __iomem *mmio_regs = NULL;
 	u8 hw_rev;
 
@@ -664,25 +661,21 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i
 	nes_notifiers_registered++;
 
 	/* Initialize network devices */
-		if ((netdev = nes_netdev_init(nesdev, mmio_regs)) == NULL) {
-			goto bail7;
-		}
-
-		/* Register network device */
-		ret = register_netdev(netdev);
-		if (ret) {
-			printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n", ret);
-			nes_netdev_destroy(netdev);
-			goto bail7;
-		}
+	if ((netdev = nes_netdev_init(nesdev, mmio_regs)) == NULL)
+		goto bail7;
 
-		nes_print_macaddr(netdev);
-		/* create a CM core for this netdev */
-		nesvnic = netdev_priv(netdev);
+	/* Register network device */
+	ret = register_netdev(netdev);
+	if (ret) {
+		printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n", ret);
+		nes_netdev_destroy(netdev);
+		goto bail7;
+	}
 
-		nesdev->netdev_count++;
-		nesdev->nesadapter->netdev_count++;
+	nes_print_macaddr(netdev);
 
+	nesdev->netdev_count++;
+	nesdev->nesadapter->netdev_count++;
 
 	printk(KERN_ERR PFX "%s: NetEffect RNIC driver successfully loaded.\n",
 			pci_name(pcidev));
@@ -1104,7 +1097,7 @@ static ssize_t nes_show_wqm_quanta(struct device_driver *ddp, char *buf)
 		i++;
 	}
 
-	return  snprintf(buf, PAGE_SIZE, "0x%X\n", wqm_quanta);
+	return  snprintf(buf, PAGE_SIZE, "0x%X\n", wqm_quanta_value);
 }
 
 
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index cc78fee1dd5..b3d145e82b4 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -262,6 +262,7 @@ struct nes_device {
 	u16                    base_doorbell_index;
 	u16                    currcq_count;
 	u16                    deepcq_count;
+	u8                     iw_status;
 	u8                     msi_enabled;
 	u8                     netdev_count;
 	u8                     napi_isr_ran;
@@ -527,6 +528,7 @@ void nes_cm_disconn_worker(void *);
 int nes_hw_modify_qp(struct nes_device *, struct nes_qp *, u32, u32, u32);
 int nes_modify_qp(struct ib_qp *, struct ib_qp_attr *, int, struct ib_udata *);
 struct nes_ib_device *nes_init_ofa_device(struct net_device *);
+void  nes_port_ibevent(struct nes_vnic *nesvnic);
 void nes_destroy_ofa_device(struct nes_ib_device *);
 int nes_register_ofa_device(struct nes_ib_device *);
 
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index d876d0435cd..443cea55daa 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1719,8 +1719,6 @@ static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 {
 	int datasize = 0;
 	u32 inc_sequence;
-	u32 rem_seq_ack;
-	u32 rem_seq;
 	int ret = 0;
 	int optionsize;
 	optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
@@ -1730,8 +1728,6 @@ static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 
 	skb_pull(skb, tcph->doff << 2);
 	inc_sequence = ntohl(tcph->seq);
-	rem_seq = ntohl(tcph->seq);
-	rem_seq_ack =  ntohl(tcph->ack_seq);
 	datasize = skb->len;
 	switch (cm_node->state) {
 	case NES_CM_STATE_SYN_RCVD:
@@ -2565,7 +2561,7 @@ static int nes_cm_disconn_true(struct nes_qp *nesqp)
 	u16 last_ae;
 	u8 original_hw_tcp_state;
 	u8 original_ibqp_state;
-	enum iw_cm_event_type disconn_status = IW_CM_EVENT_STATUS_OK;
+	enum iw_cm_event_status disconn_status = IW_CM_EVENT_STATUS_OK;
 	int issue_disconn = 0;
 	int issue_close = 0;
 	int issue_flush = 0;
@@ -3128,17 +3124,15 @@ int nes_create_listen(struct iw_cm_id *cm_id, int backlog)
 	struct nes_vnic *nesvnic;
 	struct nes_cm_listener *cm_node;
 	struct nes_cm_info cm_info;
-	struct nes_adapter *adapter;
 	int err;
 
-
 	nes_debug(NES_DBG_CM, "cm_id = %p, local port = 0x%04X.\n",
 			cm_id, ntohs(cm_id->local_addr.sin_port));
 
 	nesvnic = to_nesvnic(cm_id->device);
 	if (!nesvnic)
 		return -EINVAL;
-	adapter = nesvnic->nesdev->nesadapter;
+
 	nes_debug(NES_DBG_CM, "nesvnic=%p, netdev=%p, %s\n",
 			nesvnic, nesvnic->netdev, nesvnic->netdev->name);
 
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 57874a16508..f8233c851c6 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -1970,7 +1970,7 @@ void nes_destroy_nic_qp(struct nes_vnic *nesvnic)
 			dev_kfree_skb(
 				nesvnic->nic.tx_skb[nesvnic->nic.sq_tail]);
 
-		nesvnic->nic.sq_tail = (++nesvnic->nic.sq_tail)
+		nesvnic->nic.sq_tail = (nesvnic->nic.sq_tail + 1)
 					& (nesvnic->nic.sq_size - 1);
 	}
 
@@ -2737,9 +2737,9 @@ void nes_nic_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
 				nesnic->sq_tail &= nesnic->sq_size-1;
 				if (sq_cqes > 128) {
 					barrier();
-				/* restart the queue if it had been stopped */
-				if (netif_queue_stopped(nesvnic->netdev))
-					netif_wake_queue(nesvnic->netdev);
+					/* restart the queue if it had been stopped */
+					if (netif_queue_stopped(nesvnic->netdev))
+						netif_wake_queue(nesvnic->netdev);
 					sq_cqes = 0;
 				}
 			} else {
@@ -2999,11 +2999,8 @@ static void nes_cqp_ce_handler(struct nes_device *nesdev, struct nes_hw_cq *cq)
 
 static u8 *locate_mpa(u8 *pkt, u32 aeq_info)
 {
-	u16 pkt_len;
-
 	if (aeq_info & NES_AEQE_Q2_DATA_ETHERNET) {
 		/* skip over ethernet header */
-		pkt_len = be16_to_cpu(*(u16 *)(pkt + ETH_HLEN - 2));
 		pkt += ETH_HLEN;
 
 		/* Skip over IP and TCP headers */
@@ -3283,9 +3280,15 @@ static void nes_terminate_connection(struct nes_device *nesdev, struct nes_qp *n
 	else
 		mod_qp_flags |= NES_CQP_QP_TERM_DONT_SEND_TERM_MSG;
 
-	nes_terminate_start_timer(nesqp);
-	nesqp->term_flags |= NES_TERM_SENT;
-	nes_hw_modify_qp(nesdev, nesqp, mod_qp_flags, termlen, 0);
+	if (!nesdev->iw_status)  {
+		nesqp->term_flags = NES_TERM_DONE;
+		nes_hw_modify_qp(nesdev, nesqp, NES_CQP_QP_IWARP_STATE_ERROR, 0, 0);
+		nes_cm_disconn(nesqp);
+	} else {
+		nes_terminate_start_timer(nesqp);
+		nesqp->term_flags |= NES_TERM_SENT;
+		nes_hw_modify_qp(nesdev, nesqp, mod_qp_flags, termlen, 0);
+	}
 }
 
 static void nes_terminate_send_fin(struct nes_device *nesdev,
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index bbbfe9fc5a5..aa9183db32b 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -1100,11 +1100,12 @@ struct nes_adapter {
 	u32 wqm_wat;
 	u32 core_clock;
 	u32 firmware_version;
+	u32 eeprom_version;
 
 	u32 nic_rx_eth_route_err;
 
 	u32 et_rx_coalesce_usecs;
-	u32	et_rx_max_coalesced_frames;
+	u32 et_rx_max_coalesced_frames;
 	u32 et_rx_coalesce_usecs_irq;
 	u32 et_rx_max_coalesced_frames_irq;
 	u32 et_pkt_rate_low;
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 42e7aad1ec2..6dfdd49cdbc 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -232,6 +232,13 @@ static int nes_netdev_open(struct net_device *netdev)
 				NES_MAC_INT_TX_UNDERFLOW | NES_MAC_INT_TX_ERROR));
 		first_nesvnic = nesvnic;
 	}
+
+	if (nesvnic->of_device_registered) {
+		nesdev->iw_status = 1;
+		nesdev->nesadapter->send_term_ok = 1;
+		nes_port_ibevent(nesvnic);
+	}
+
 	if (first_nesvnic->linkup) {
 		/* Enable network packets */
 		nesvnic->linkup = 1;
@@ -309,9 +316,9 @@ static int nes_netdev_stop(struct net_device *netdev)
 
 
 	if (nesvnic->of_device_registered) {
-		nes_destroy_ofa_device(nesvnic->nesibdev);
-		nesvnic->nesibdev = NULL;
-		nesvnic->of_device_registered = 0;
+		nesdev->nesadapter->send_term_ok = 0;
+		nesdev->iw_status = 0;
+		nes_port_ibevent(nesvnic);
 	}
 	nes_destroy_nic_qp(nesvnic);
 
@@ -463,7 +470,6 @@ static int nes_netdev_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	u16 nhoffset;
 	u16 wqes_needed;
 	u16 wqes_available;
-	u32 old_head;
 	u32 wqe_misc;
 
 	/*
@@ -503,7 +509,6 @@ sq_no_longer_full:
 		if (skb_is_gso(skb)) {
 			nesvnic->segmented_tso_requests++;
 			nesvnic->tso_requests++;
-			old_head = nesnic->sq_head;
 			/* Basically 4 fragments available per WQE with extended fragments */
 			wqes_needed = nr_frags >> 2;
 			wqes_needed += (nr_frags&3)?1:0;
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index a9f5dd272f1..f9c417c6b3b 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -190,6 +190,11 @@ int nes_read_eeprom_values(struct nes_device *nesdev, struct nes_adapter *nesada
 		nesadapter->firmware_version = (((u32)(u8)(eeprom_data>>8))  <<  16) +
 				(u32)((u8)eeprom_data);
 
+		eeprom_data = nes_read16_eeprom(nesdev->regs, next_section_address + 10);
+		printk(PFX "EEPROM version %u.%u\n", (u8)(eeprom_data>>8), (u8)eeprom_data);
+		nesadapter->eeprom_version = (((u32)(u8)(eeprom_data>>8)) << 16) +
+				(u32)((u8)eeprom_data);
+
 no_fw_rev:
 		/* eeprom is valid */
 		eeprom_offset = nesadapter->software_eeprom_offset;
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index 9bc2d744b2e..9046e667568 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -518,7 +518,7 @@ static int nes_query_device(struct ib_device *ibdev, struct ib_device_attr *prop
 	memset(props, 0, sizeof(*props));
 	memcpy(&props->sys_image_guid, nesvnic->netdev->dev_addr, 6);
 
-	props->fw_ver = nesdev->nesadapter->fw_ver;
+	props->fw_ver = nesdev->nesadapter->firmware_version;
 	props->device_cap_flags = nesdev->nesadapter->device_cap_flags;
 	props->vendor_id = nesdev->nesadapter->vendor_id;
 	props->vendor_part_id = nesdev->nesadapter->vendor_part_id;
@@ -1941,7 +1941,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd,
 	u8  use_256_pbls = 0;
 	u8  use_4k_pbls = 0;
 	u16 use_two_level = (pbl_count_4k > 1) ? 1 : 0;
-	struct nes_root_vpbl new_root = {0, 0, 0};
+	struct nes_root_vpbl new_root = { 0, NULL, NULL };
 	u32 opcode = 0;
 	u16 major_code;
 
@@ -2112,13 +2112,12 @@ static struct ib_mr *nes_reg_phys_mr(struct ib_pd *ib_pd,
 	u32 driver_key = 0;
 	u32 root_pbl_index = 0;
 	u32 cur_pbl_index = 0;
-	int err = 0, pbl_depth = 0;
+	int err = 0;
 	int ret = 0;
 	u16 pbl_count = 0;
 	u8 single_page = 1;
 	u8 stag_key = 0;
 
-	pbl_depth = 0;
 	region_length = 0;
 	vpbl.pbl_vbase = NULL;
 	root_vpbl.pbl_vbase = NULL;
@@ -2931,7 +2930,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	int ret;
 	u16 original_last_aeq;
 	u8 issue_modify_qp = 0;
-	u8 issue_disconnect = 0;
 	u8 dont_wait = 0;
 
 	nes_debug(NES_DBG_MOD_QP, "QP%u: QP State=%u, cur QP State=%u,"
@@ -3058,6 +3056,7 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 						nesqp->hte_added = 0;
 					}
 				if ((nesqp->hw_tcp_state > NES_AEQE_TCP_STATE_CLOSED) &&
+						(nesdev->iw_status) &&
 						(nesqp->hw_tcp_state != NES_AEQE_TCP_STATE_TIME_WAIT)) {
 					next_iwarp_state |= NES_CQP_QP_RESET;
 				} else {
@@ -3082,7 +3081,6 @@ int nes_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 			nesqp->iwarp_state = next_iwarp_state & NES_CQP_QP_IWARP_STATE_MASK;
 			nes_debug(NES_DBG_MOD_QP, "Change nesqp->iwarp_state=%08x\n",
 					nesqp->iwarp_state);
-			issue_disconnect = 1;
 		} else {
 			nesqp->iwarp_state = next_iwarp_state & NES_CQP_QP_IWARP_STATE_MASK;
 			nes_debug(NES_DBG_MOD_QP, "Change nesqp->iwarp_state=%08x\n",
@@ -3936,6 +3934,17 @@ struct nes_ib_device *nes_init_ofa_device(struct net_device *netdev)
 	return nesibdev;
 }
 
+void  nes_port_ibevent(struct nes_vnic *nesvnic)
+{
+	struct nes_ib_device *nesibdev = nesvnic->nesibdev;
+	struct nes_device *nesdev = nesvnic->nesdev;
+	struct ib_event event;
+	event.device = &nesibdev->ibdev;
+	event.element.port_num = nesvnic->logical_port + 1;
+	event.event = nesdev->iw_status ? IB_EVENT_PORT_ACTIVE : IB_EVENT_PORT_ERR;
+	ib_dispatch_event(&event);
+}
+
 
 /**
  * nes_destroy_ofa_device
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 3593983df7b..61de0654820 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -45,6 +45,7 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/scatterlist.h>
+#include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/fs.h>
 #include <linux/completion.h>
@@ -326,6 +327,9 @@ struct qib_verbs_txreq {
 
 #define QIB_DEFAULT_MTU 4096
 
+/* max number of IB ports supported per HCA */
+#define QIB_MAX_IB_PORTS 2
+
 /*
  * Possible IB config parameters for f_get/set_ib_table()
  */
diff --git a/drivers/infiniband/hw/qib/qib_common.h b/drivers/infiniband/hw/qib/qib_common.h
index b3955ed8f79..145da404088 100644
--- a/drivers/infiniband/hw/qib/qib_common.h
+++ b/drivers/infiniband/hw/qib/qib_common.h
@@ -279,7 +279,7 @@ struct qib_base_info {
  * may not be implemented; the user code must deal with this if it
  * cares, or it must abort after initialization reports the difference.
  */
-#define QIB_USER_SWMINOR 10
+#define QIB_USER_SWMINOR 11
 
 #define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR)
 
@@ -302,6 +302,18 @@ struct qib_base_info {
 #define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION)
 
 /*
+ * If the unit is specified via open, HCA choice is fixed.  If port is
+ * specified, it's also fixed.  Otherwise we try to spread contexts
+ * across ports and HCAs, using different algorithims.  WITHIN is
+ * the old default, prior to this mechanism.
+ */
+#define QIB_PORT_ALG_ACROSS 0 /* round robin contexts across HCAs, then
+			       * ports; this is the default */
+#define QIB_PORT_ALG_WITHIN 1 /* use all contexts on an HCA (round robin
+			       * active ports within), then next HCA */
+#define QIB_PORT_ALG_COUNT 2 /* number of algorithm choices */
+
+/*
  * This structure is passed to qib_userinit() to tell the driver where
  * user code buffers are, sizes, etc.   The offsets and sizes of the
  * fields must remain unchanged, for binary compatibility.  It can
@@ -319,7 +331,7 @@ struct qib_user_info {
 	/* size of struct base_info to write to */
 	__u32 spu_base_info_size;
 
-	__u32 _spu_unused3;
+	__u32 spu_port_alg; /* which QIB_PORT_ALG_*; unused user minor < 11 */
 
 	/*
 	 * If two or more processes wish to share a context, each process
diff --git a/drivers/infiniband/hw/qib/qib_driver.c b/drivers/infiniband/hw/qib/qib_driver.c
index f15ce076ac4..9cd193603fb 100644
--- a/drivers/infiniband/hw/qib/qib_driver.c
+++ b/drivers/infiniband/hw/qib/qib_driver.c
@@ -335,7 +335,7 @@ u32 qib_kreceive(struct qib_ctxtdata *rcd, u32 *llic, u32 *npkts)
 		smp_rmb();  /* prevent speculative reads of dma'ed hdrq */
 	}
 
-	for (last = 0, i = 1; !last; i += !last) {
+	for (last = 0, i = 1; !last && i <= 64; i += !last) {
 		hdr = dd->f_get_msgheader(dd, rhf_addr);
 		eflags = qib_hdrget_err_flags(rhf_addr);
 		etype = qib_hdrget_rcv_type(rhf_addr);
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index a142a9eb522..6b11645edf3 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1294,128 +1294,130 @@ bail:
 	return ret;
 }
 
-static inline int usable(struct qib_pportdata *ppd, int active_only)
+static inline int usable(struct qib_pportdata *ppd)
 {
 	struct qib_devdata *dd = ppd->dd;
-	u32 linkok = active_only ? QIBL_LINKACTIVE :
-		 (QIBL_LINKINIT | QIBL_LINKARMED | QIBL_LINKACTIVE);
 
 	return dd && (dd->flags & QIB_PRESENT) && dd->kregbase && ppd->lid &&
-		(ppd->lflags & linkok);
+		(ppd->lflags & QIBL_LINKACTIVE);
 }
 
-static int find_free_ctxt(int unit, struct file *fp,
-			  const struct qib_user_info *uinfo)
+/*
+ * Select a context on the given device, either using a requested port
+ * or the port based on the context number.
+ */
+static int choose_port_ctxt(struct file *fp, struct qib_devdata *dd, u32 port,
+			    const struct qib_user_info *uinfo)
 {
-	struct qib_devdata *dd = qib_lookup(unit);
 	struct qib_pportdata *ppd = NULL;
-	int ret;
-	u32 ctxt;
+	int ret, ctxt;
 
-	if (!dd || (uinfo->spu_port && uinfo->spu_port > dd->num_pports)) {
-		ret = -ENODEV;
-		goto bail;
-	}
-
-	/*
-	 * If users requests specific port, only try that one port, else
-	 * select "best" port below, based on context.
-	 */
-	if (uinfo->spu_port) {
-		ppd = dd->pport + uinfo->spu_port - 1;
-		if (!usable(ppd, 0)) {
+	if (port) {
+		if (!usable(dd->pport + port - 1)) {
 			ret = -ENETDOWN;
-			goto bail;
-		}
+			goto done;
+		} else
+			ppd = dd->pport + port - 1;
 	}
-
-	for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) {
-		if (dd->rcd[ctxt])
-			continue;
-		/*
-		 * The setting and clearing of user context rcd[x] protected
-		 * by the qib_mutex
-		 */
-		if (!ppd) {
-			/* choose port based on ctxt, if up, else 1st up */
-			ppd = dd->pport + (ctxt % dd->num_pports);
-			if (!usable(ppd, 0)) {
-				int i;
-				for (i = 0; i < dd->num_pports; i++) {
-					ppd = dd->pport + i;
-					if (usable(ppd, 0))
-						break;
-				}
-				if (i == dd->num_pports) {
-					ret = -ENETDOWN;
-					goto bail;
-				}
-			}
+	for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts && dd->rcd[ctxt];
+	     ctxt++)
+		;
+	if (ctxt == dd->cfgctxts) {
+		ret = -EBUSY;
+		goto done;
+	}
+	if (!ppd) {
+		u32 pidx = ctxt % dd->num_pports;
+		if (usable(dd->pport + pidx))
+			ppd = dd->pport + pidx;
+		else {
+			for (pidx = 0; pidx < dd->num_pports && !ppd;
+			     pidx++)
+				if (usable(dd->pport + pidx))
+					ppd = dd->pport + pidx;
 		}
-		ret = setup_ctxt(ppd, ctxt, fp, uinfo);
-		goto bail;
 	}
-	ret = -EBUSY;
+	ret = ppd ? setup_ctxt(ppd, ctxt, fp, uinfo) : -ENETDOWN;
+done:
+	return ret;
+}
+
+static int find_free_ctxt(int unit, struct file *fp,
+			  const struct qib_user_info *uinfo)
+{
+	struct qib_devdata *dd = qib_lookup(unit);
+	int ret;
+
+	if (!dd || (uinfo->spu_port && uinfo->spu_port > dd->num_pports))
+		ret = -ENODEV;
+	else
+		ret = choose_port_ctxt(fp, dd, uinfo->spu_port, uinfo);
 
-bail:
 	return ret;
 }
 
-static int get_a_ctxt(struct file *fp, const struct qib_user_info *uinfo)
+static int get_a_ctxt(struct file *fp, const struct qib_user_info *uinfo,
+		      unsigned alg)
 {
-	struct qib_pportdata *ppd;
-	int ret = 0, devmax;
-	int npresent, nup;
-	int ndev;
+	struct qib_devdata *udd = NULL;
+	int ret = 0, devmax, npresent, nup, ndev, dusable = 0, i;
 	u32 port = uinfo->spu_port, ctxt;
 
 	devmax = qib_count_units(&npresent, &nup);
+	if (!npresent) {
+		ret = -ENXIO;
+		goto done;
+	}
+	if (nup == 0) {
+		ret = -ENETDOWN;
+		goto done;
+	}
 
-	for (ndev = 0; ndev < devmax; ndev++) {
-		struct qib_devdata *dd = qib_lookup(ndev);
-
-		/* device portion of usable() */
-		if (!(dd && (dd->flags & QIB_PRESENT) && dd->kregbase))
-			continue;
-		for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts; ctxt++) {
-			if (dd->rcd[ctxt])
+	if (alg == QIB_PORT_ALG_ACROSS) {
+		unsigned inuse = ~0U;
+		/* find device (with ACTIVE ports) with fewest ctxts in use */
+		for (ndev = 0; ndev < devmax; ndev++) {
+			struct qib_devdata *dd = qib_lookup(ndev);
+			unsigned cused = 0, cfree = 0;
+			if (!dd)
 				continue;
-			if (port) {
-				if (port > dd->num_pports)
-					continue;
-				ppd = dd->pport + port - 1;
-				if (!usable(ppd, 0))
-					continue;
-			} else {
-				/*
-				 * choose port based on ctxt, if up, else
-				 * first port that's up for multi-port HCA
-				 */
-				ppd = dd->pport + (ctxt % dd->num_pports);
-				if (!usable(ppd, 0)) {
-					int j;
-
-					ppd = NULL;
-					for (j = 0; j < dd->num_pports &&
-						!ppd; j++)
-						if (usable(dd->pport + j, 0))
-							ppd = dd->pport + j;
-					if (!ppd)
-						continue; /* to next unit */
-				}
+			if (port && port <= dd->num_pports &&
+			    usable(dd->pport + port - 1))
+				dusable = 1;
+			else
+				for (i = 0; i < dd->num_pports; i++)
+					if (usable(dd->pport + i))
+						dusable++;
+			if (!dusable)
+				continue;
+			for (ctxt = dd->first_user_ctxt; ctxt < dd->cfgctxts;
+			     ctxt++)
+				if (dd->rcd[ctxt])
+					cused++;
+				else
+					cfree++;
+			if (cfree && cused < inuse) {
+				udd = dd;
+				inuse = cused;
 			}
-			ret = setup_ctxt(ppd, ctxt, fp, uinfo);
+		}
+		if (udd) {
+			ret = choose_port_ctxt(fp, udd, port, uinfo);
 			goto done;
 		}
+	} else {
+		for (ndev = 0; ndev < devmax; ndev++) {
+			struct qib_devdata *dd = qib_lookup(ndev);
+			if (dd) {
+				ret = choose_port_ctxt(fp, dd, port, uinfo);
+				if (!ret)
+					goto done;
+				if (ret == -EBUSY)
+					dusable++;
+			}
+		}
 	}
-
-	if (npresent) {
-		if (nup == 0)
-			ret = -ENETDOWN;
-		else
-			ret = -EBUSY;
-	} else
-		ret = -ENXIO;
+	ret = dusable ? -EBUSY : -ENETDOWN;
 
 done:
 	return ret;
@@ -1481,7 +1483,7 @@ static int qib_assign_ctxt(struct file *fp, const struct qib_user_info *uinfo)
 {
 	int ret;
 	int i_minor;
-	unsigned swmajor, swminor;
+	unsigned swmajor, swminor, alg = QIB_PORT_ALG_ACROSS;
 
 	/* Check to be sure we haven't already initialized this file */
 	if (ctxt_fp(fp)) {
@@ -1498,6 +1500,9 @@ static int qib_assign_ctxt(struct file *fp, const struct qib_user_info *uinfo)
 
 	swminor = uinfo->spu_userversion & 0xffff;
 
+	if (swminor >= 11 && uinfo->spu_port_alg < QIB_PORT_ALG_COUNT)
+		alg = uinfo->spu_port_alg;
+
 	mutex_lock(&qib_mutex);
 
 	if (qib_compatible_subctxts(swmajor, swminor) &&
@@ -1514,7 +1519,7 @@ static int qib_assign_ctxt(struct file *fp, const struct qib_user_info *uinfo)
 	if (i_minor)
 		ret = find_free_ctxt(i_minor - 1, fp, uinfo);
 	else
-		ret = get_a_ctxt(fp, uinfo);
+		ret = get_a_ctxt(fp, uinfo, alg);
 
 done_chk_sdma:
 	if (!ret) {
@@ -1862,7 +1867,7 @@ static int disarm_req_delay(struct qib_ctxtdata *rcd)
 {
 	int ret = 0;
 
-	if (!usable(rcd->ppd, 1)) {
+	if (!usable(rcd->ppd)) {
 		int i;
 		/*
 		 * if link is down, or otherwise not usable, delay
@@ -1881,7 +1886,7 @@ static int disarm_req_delay(struct qib_ctxtdata *rcd)
 				set_bit(_QIB_EVENT_DISARM_BUFS_BIT,
 					&rcd->user_event_mask[i]);
 		}
-		for (i = 0; !usable(rcd->ppd, 1) && i < 300; i++)
+		for (i = 0; !usable(rcd->ppd) && i < 300; i++)
 			msleep(100);
 		ret = -ENETDOWN;
 	}
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index 844954bf417..9f989c0ba9d 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -135,8 +135,8 @@ static ssize_t driver_names_read(struct file *file, char __user *buf,
 }
 
 static const struct file_operations driver_ops[] = {
-	{ .read = driver_stats_read, },
-	{ .read = driver_names_read, },
+	{ .read = driver_stats_read, .llseek = generic_file_llseek, },
+	{ .read = driver_names_read, .llseek = generic_file_llseek, },
 };
 
 /* read the per-device counters */
@@ -164,8 +164,8 @@ static ssize_t dev_names_read(struct file *file, char __user *buf,
 }
 
 static const struct file_operations cntr_ops[] = {
-	{ .read = dev_counters_read, },
-	{ .read = dev_names_read, },
+	{ .read = dev_counters_read, .llseek = generic_file_llseek, },
+	{ .read = dev_names_read, .llseek = generic_file_llseek, },
 };
 
 /*
@@ -210,9 +210,9 @@ static ssize_t portcntrs_2_read(struct file *file, char __user *buf,
 }
 
 static const struct file_operations portcntr_ops[] = {
-	{ .read = portnames_read, },
-	{ .read = portcntrs_1_read, },
-	{ .read = portcntrs_2_read, },
+	{ .read = portnames_read, .llseek = generic_file_llseek, },
+	{ .read = portcntrs_1_read, .llseek = generic_file_llseek, },
+	{ .read = portcntrs_2_read, .llseek = generic_file_llseek, },
 };
 
 /*
@@ -261,8 +261,8 @@ static ssize_t qsfp_2_read(struct file *file, char __user *buf,
 }
 
 static const struct file_operations qsfp_ops[] = {
-	{ .read = qsfp_1_read, },
-	{ .read = qsfp_2_read, },
+	{ .read = qsfp_1_read, .llseek = generic_file_llseek, },
+	{ .read = qsfp_2_read, .llseek = generic_file_llseek, },
 };
 
 static ssize_t flash_read(struct file *file, char __user *buf,
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 5eedf83e2c3..584d443b533 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -5864,7 +5864,7 @@ static void write_7322_initregs(struct qib_devdata *dd)
 	 * Doesn't clear any of the error bits that might be set.
 	 */
 	val = TIDFLOW_ERRBITS; /* these are W1C */
-	for (i = 0; i < dd->ctxtcnt; i++) {
+	for (i = 0; i < dd->cfgctxts; i++) {
 		int flow;
 		for (flow = 0; flow < NUM_TIDFLOWS_CTXT; flow++)
 			qib_write_ureg(dd, ur_rcvflowtable+flow, val, i);
@@ -7271,6 +7271,8 @@ static int serdes_7322_init(struct qib_pportdata *ppd)
 	ibsd_wr_allchans(ppd, 20, (4 << 13), BMASK(15, 13)); /* SDR */
 
 	data = qib_read_kreg_port(ppd, krp_serdesctrl);
+	/* Turn off IB latency mode */
+	data &= ~SYM_MASK(IBSerdesCtrl_0, IB_LAT_MODE);
 	qib_write_kreg_port(ppd, krp_serdesctrl, data |
 		SYM_MASK(IBSerdesCtrl_0, RXLOSEN));
 
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index a873dd596e8..f1d16d3a01f 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -93,7 +93,7 @@ unsigned long *qib_cpulist;
 void qib_set_ctxtcnt(struct qib_devdata *dd)
 {
 	if (!qib_cfgctxts)
-		dd->cfgctxts = dd->ctxtcnt;
+		dd->cfgctxts = dd->first_user_ctxt + num_online_cpus();
 	else if (qib_cfgctxts < dd->num_pports)
 		dd->cfgctxts = dd->ctxtcnt;
 	else if (qib_cfgctxts <= dd->ctxtcnt)
diff --git a/drivers/infiniband/hw/qib/qib_qp.c b/drivers/infiniband/hw/qib/qib_qp.c
index e0f65e39076..6c39851d2de 100644
--- a/drivers/infiniband/hw/qib/qib_qp.c
+++ b/drivers/infiniband/hw/qib/qib_qp.c
@@ -450,7 +450,7 @@ static void clear_mr_refs(struct qib_qp *qp, int clr_sends)
  *
  * Flushes both send and receive work queues.
  * Returns true if last WQE event should be generated.
- * The QP s_lock should be held and interrupts disabled.
+ * The QP r_lock and s_lock should be held and interrupts disabled.
  * If we are already in error state, just return.
  */
 int qib_error_qp(struct qib_qp *qp, enum ib_wc_status err)
diff --git a/drivers/infiniband/hw/qib/qib_rc.c b/drivers/infiniband/hw/qib/qib_rc.c
index 40c0a373719..a0931119bd7 100644
--- a/drivers/infiniband/hw/qib/qib_rc.c
+++ b/drivers/infiniband/hw/qib/qib_rc.c
@@ -868,7 +868,7 @@ done:
 
 /*
  * Back up requester to resend the last un-ACKed request.
- * The QP s_lock should be held and interrupts disabled.
+ * The QP r_lock and s_lock should be held and interrupts disabled.
  */
 static void qib_restart_rc(struct qib_qp *qp, u32 psn, int wait)
 {
@@ -911,7 +911,8 @@ static void rc_timeout(unsigned long arg)
 	struct qib_ibport *ibp;
 	unsigned long flags;
 
-	spin_lock_irqsave(&qp->s_lock, flags);
+	spin_lock_irqsave(&qp->r_lock, flags);
+	spin_lock(&qp->s_lock);
 	if (qp->s_flags & QIB_S_TIMER) {
 		ibp = to_iport(qp->ibqp.device, qp->port_num);
 		ibp->n_rc_timeouts++;
@@ -920,7 +921,8 @@ static void rc_timeout(unsigned long arg)
 		qib_restart_rc(qp, qp->s_last_psn + 1, 1);
 		qib_schedule_send(qp);
 	}
-	spin_unlock_irqrestore(&qp->s_lock, flags);
+	spin_unlock(&qp->s_lock);
+	spin_unlock_irqrestore(&qp->r_lock, flags);
 }
 
 /*
@@ -1414,10 +1416,6 @@ static void qib_rc_rcv_resp(struct qib_ibport *ibp,
 
 	spin_lock_irqsave(&qp->s_lock, flags);
 
-	/* Double check we can process this now that we hold the s_lock. */
-	if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
-		goto ack_done;
-
 	/* Ignore invalid responses. */
 	if (qib_cmp24(psn, qp->s_next_psn) >= 0)
 		goto ack_done;
@@ -1661,9 +1659,6 @@ static int qib_rc_rcv_error(struct qib_other_headers *ohdr,
 	ibp->n_rc_dupreq++;
 
 	spin_lock_irqsave(&qp->s_lock, flags);
-	/* Double check we can process this now that we hold the s_lock. */
-	if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
-		goto unlock_done;
 
 	for (i = qp->r_head_ack_queue; ; i = prev) {
 		if (i == qp->s_tail_ack_queue)
@@ -1878,9 +1873,6 @@ void qib_rc_rcv(struct qib_ctxtdata *rcd, struct qib_ib_header *hdr,
 	psn = be32_to_cpu(ohdr->bth[2]);
 	opcode >>= 24;
 
-	/* Prevent simultaneous processing after APM on different CPUs */
-	spin_lock(&qp->r_lock);
-
 	/*
 	 * Process responses (ACKs) before anything else.  Note that the
 	 * packet sequence number will be for something in the send work
@@ -1891,14 +1883,14 @@ void qib_rc_rcv(struct qib_ctxtdata *rcd, struct qib_ib_header *hdr,
 	    opcode <= OP(ATOMIC_ACKNOWLEDGE)) {
 		qib_rc_rcv_resp(ibp, ohdr, data, tlen, qp, opcode, psn,
 				hdrsize, pmtu, rcd);
-		goto runlock;
+		return;
 	}
 
 	/* Compute 24 bits worth of difference. */
 	diff = qib_cmp24(psn, qp->r_psn);
 	if (unlikely(diff)) {
 		if (qib_rc_rcv_error(ohdr, data, qp, opcode, psn, diff, rcd))
-			goto runlock;
+			return;
 		goto send_ack;
 	}
 
@@ -2090,9 +2082,6 @@ send_last:
 		if (next > QIB_MAX_RDMA_ATOMIC)
 			next = 0;
 		spin_lock_irqsave(&qp->s_lock, flags);
-		/* Double check we can process this while holding the s_lock. */
-		if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
-			goto srunlock;
 		if (unlikely(next == qp->s_tail_ack_queue)) {
 			if (!qp->s_ack_queue[next].sent)
 				goto nack_inv_unlck;
@@ -2146,7 +2135,7 @@ send_last:
 		qp->s_flags |= QIB_S_RESP_PENDING;
 		qib_schedule_send(qp);
 
-		goto srunlock;
+		goto sunlock;
 	}
 
 	case OP(COMPARE_SWAP):
@@ -2165,9 +2154,6 @@ send_last:
 		if (next > QIB_MAX_RDMA_ATOMIC)
 			next = 0;
 		spin_lock_irqsave(&qp->s_lock, flags);
-		/* Double check we can process this while holding the s_lock. */
-		if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK))
-			goto srunlock;
 		if (unlikely(next == qp->s_tail_ack_queue)) {
 			if (!qp->s_ack_queue[next].sent)
 				goto nack_inv_unlck;
@@ -2213,7 +2199,7 @@ send_last:
 		qp->s_flags |= QIB_S_RESP_PENDING;
 		qib_schedule_send(qp);
 
-		goto srunlock;
+		goto sunlock;
 	}
 
 	default:
@@ -2227,7 +2213,7 @@ send_last:
 	/* Send an ACK if requested or required. */
 	if (psn & (1 << 31))
 		goto send_ack;
-	goto runlock;
+	return;
 
 rnr_nak:
 	qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
@@ -2238,7 +2224,7 @@ rnr_nak:
 		atomic_inc(&qp->refcount);
 		list_add_tail(&qp->rspwait, &rcd->qp_wait_list);
 	}
-	goto runlock;
+	return;
 
 nack_op_err:
 	qib_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
@@ -2250,7 +2236,7 @@ nack_op_err:
 		atomic_inc(&qp->refcount);
 		list_add_tail(&qp->rspwait, &rcd->qp_wait_list);
 	}
-	goto runlock;
+	return;
 
 nack_inv_unlck:
 	spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -2264,7 +2250,7 @@ nack_inv:
 		atomic_inc(&qp->refcount);
 		list_add_tail(&qp->rspwait, &rcd->qp_wait_list);
 	}
-	goto runlock;
+	return;
 
 nack_acc_unlck:
 	spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -2274,13 +2260,6 @@ nack_acc:
 	qp->r_ack_psn = qp->r_psn;
 send_ack:
 	qib_send_rc_ack(qp);
-runlock:
-	spin_unlock(&qp->r_lock);
-	return;
-
-srunlock:
-	spin_unlock_irqrestore(&qp->s_lock, flags);
-	spin_unlock(&qp->r_lock);
 	return;
 
 sunlock:
diff --git a/drivers/infiniband/hw/qib/qib_sdma.c b/drivers/infiniband/hw/qib/qib_sdma.c
index b8456881f7f..cad44491320 100644
--- a/drivers/infiniband/hw/qib/qib_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_sdma.c
@@ -656,6 +656,7 @@ unmap:
 	}
 	qp = tx->qp;
 	qib_put_txreq(tx);
+	spin_lock(&qp->r_lock);
 	spin_lock(&qp->s_lock);
 	if (qp->ibqp.qp_type == IB_QPT_RC) {
 		/* XXX what about error sending RDMA read responses? */
@@ -664,6 +665,7 @@ unmap:
 	} else if (qp->s_wqe)
 		qib_send_complete(qp, qp->s_wqe, IB_WC_GENERAL_ERR);
 	spin_unlock(&qp->s_lock);
+	spin_unlock(&qp->r_lock);
 	/* return zero to process the next send work request */
 	goto unlock;
 
diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index dab4d9f4a2c..d50a33fe8bb 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -347,7 +347,7 @@ static struct kobj_type qib_sl2vl_ktype = {
 
 #define QIB_DIAGC_ATTR(N) \
 	static struct qib_diagc_attr qib_diagc_attr_##N = { \
-		.attr = { .name = __stringify(N), .mode = 0444 }, \
+		.attr = { .name = __stringify(N), .mode = 0664 }, \
 		.counter = offsetof(struct qib_ibport, n_##N) \
 	}
 
@@ -403,8 +403,27 @@ static ssize_t diagc_attr_show(struct kobject *kobj, struct attribute *attr,
 	return sprintf(buf, "%u\n", *(u32 *)((char *)qibp + dattr->counter));
 }
 
+static ssize_t diagc_attr_store(struct kobject *kobj, struct attribute *attr,
+				const char *buf, size_t size)
+{
+	struct qib_diagc_attr *dattr =
+		container_of(attr, struct qib_diagc_attr, attr);
+	struct qib_pportdata *ppd =
+		container_of(kobj, struct qib_pportdata, diagc_kobj);
+	struct qib_ibport *qibp = &ppd->ibport_data;
+	char *endp;
+	long val = simple_strtol(buf, &endp, 0);
+
+	if (val < 0 || endp == buf)
+		return -EINVAL;
+
+	*(u32 *)((char *) qibp + dattr->counter) = val;
+	return size;
+}
+
 static const struct sysfs_ops qib_diagc_ops = {
 	.show = diagc_attr_show,
+	.store = diagc_attr_store,
 };
 
 static struct kobj_type qib_diagc_ktype = {
diff --git a/drivers/infiniband/hw/qib/qib_tx.c b/drivers/infiniband/hw/qib/qib_tx.c
index af30232b683..7f36454c225 100644
--- a/drivers/infiniband/hw/qib/qib_tx.c
+++ b/drivers/infiniband/hw/qib/qib_tx.c
@@ -170,7 +170,7 @@ static int find_ctxt(struct qib_devdata *dd, unsigned bufn)
 void qib_disarm_piobufs_set(struct qib_devdata *dd, unsigned long *mask,
 			    unsigned cnt)
 {
-	struct qib_pportdata *ppd, *pppd[dd->num_pports];
+	struct qib_pportdata *ppd, *pppd[QIB_MAX_IB_PORTS];
 	unsigned i;
 	unsigned long flags;
 
diff --git a/drivers/infiniband/hw/qib/qib_uc.c b/drivers/infiniband/hw/qib/qib_uc.c
index 6c7fe78cca6..b9c8b6346c1 100644
--- a/drivers/infiniband/hw/qib/qib_uc.c
+++ b/drivers/infiniband/hw/qib/qib_uc.c
@@ -272,9 +272,6 @@ void qib_uc_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 	opcode >>= 24;
 	memset(&wc, 0, sizeof wc);
 
-	/* Prevent simultaneous processing after APM on different CPUs */
-	spin_lock(&qp->r_lock);
-
 	/* Compare the PSN verses the expected PSN. */
 	if (unlikely(qib_cmp24(psn, qp->r_psn) != 0)) {
 		/*
@@ -534,7 +531,6 @@ rdma_last:
 	}
 	qp->r_psn++;
 	qp->r_state = opcode;
-	spin_unlock(&qp->r_lock);
 	return;
 
 rewind:
@@ -542,12 +538,10 @@ rewind:
 	qp->r_sge.num_sge = 0;
 drop:
 	ibp->n_pkt_drops++;
-	spin_unlock(&qp->r_lock);
 	return;
 
 op_err:
 	qib_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
-	spin_unlock(&qp->r_lock);
 	return;
 
 sunlock:
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index c838cda7334..e1b3da2a1f8 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -535,13 +535,6 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 	wc.byte_len = tlen + sizeof(struct ib_grh);
 
 	/*
-	 * We need to serialize getting a receive work queue entry and
-	 * generating a completion for it against QPs sending to this QP
-	 * locally.
-	 */
-	spin_lock(&qp->r_lock);
-
-	/*
 	 * Get the next work request entry to find where to put the data.
 	 */
 	if (qp->r_flags & QIB_R_REUSE_SGE)
@@ -552,19 +545,19 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 		ret = qib_get_rwqe(qp, 0);
 		if (ret < 0) {
 			qib_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
-			goto bail_unlock;
+			return;
 		}
 		if (!ret) {
 			if (qp->ibqp.qp_num == 0)
 				ibp->n_vl15_dropped++;
-			goto bail_unlock;
+			return;
 		}
 	}
 	/* Silently drop packets which are too big. */
 	if (unlikely(wc.byte_len > qp->r_len)) {
 		qp->r_flags |= QIB_R_REUSE_SGE;
 		ibp->n_pkt_drops++;
-		goto bail_unlock;
+		return;
 	}
 	if (has_grh) {
 		qib_copy_sge(&qp->r_sge, &hdr->u.l.grh,
@@ -579,7 +572,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 			qp->r_sge.sge = *qp->r_sge.sg_list++;
 	}
 	if (!test_and_clear_bit(QIB_R_WRID_VALID, &qp->r_aflags))
-		goto bail_unlock;
+		return;
 	wc.wr_id = qp->r_wr_id;
 	wc.status = IB_WC_SUCCESS;
 	wc.opcode = IB_WC_RECV;
@@ -601,7 +594,5 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
 	qib_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
 		     (ohdr->bth[0] &
 			cpu_to_be32(IB_BTH_SOLICITED)) != 0);
-bail_unlock:
-	spin_unlock(&qp->r_lock);
 bail:;
 }
diff --git a/drivers/infiniband/hw/qib/qib_verbs.c b/drivers/infiniband/hw/qib/qib_verbs.c
index cda8f4173d2..9fab4048885 100644
--- a/drivers/infiniband/hw/qib/qib_verbs.c
+++ b/drivers/infiniband/hw/qib/qib_verbs.c
@@ -550,10 +550,12 @@ static void qib_qp_rcv(struct qib_ctxtdata *rcd, struct qib_ib_header *hdr,
 {
 	struct qib_ibport *ibp = &rcd->ppd->ibport_data;
 
+	spin_lock(&qp->r_lock);
+
 	/* Check for valid receive state. */
 	if (!(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK)) {
 		ibp->n_pkt_drops++;
-		return;
+		goto unlock;
 	}
 
 	switch (qp->ibqp.qp_type) {
@@ -577,6 +579,9 @@ static void qib_qp_rcv(struct qib_ctxtdata *rcd, struct qib_ib_header *hdr,
 	default:
 		break;
 	}
+
+unlock:
+	spin_unlock(&qp->r_lock);
 }
 
 /**
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 0b9ef071658..95a08a8ca8a 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -170,7 +170,7 @@ static void iser_create_send_desc(struct iser_conn	*ib_conn,
 }
 
 
-int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
+static int iser_alloc_rx_descriptors(struct iser_conn *ib_conn)
 {
 	int i, j;
 	u64 dma_addr;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index ed3f9ebae88..7f8f16bad75 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -811,6 +811,38 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target,
 	return len;
 }
 
+static int srp_post_recv(struct srp_target_port *target)
+{
+	unsigned long flags;
+	struct srp_iu *iu;
+	struct ib_sge list;
+	struct ib_recv_wr wr, *bad_wr;
+	unsigned int next;
+	int ret;
+
+	spin_lock_irqsave(target->scsi_host->host_lock, flags);
+
+	next	 = target->rx_head & (SRP_RQ_SIZE - 1);
+	wr.wr_id = next;
+	iu	 = target->rx_ring[next];
+
+	list.addr   = iu->dma;
+	list.length = iu->size;
+	list.lkey   = target->srp_host->srp_dev->mr->lkey;
+
+	wr.next     = NULL;
+	wr.sg_list  = &list;
+	wr.num_sge  = 1;
+
+	ret = ib_post_recv(target->qp, &wr, &bad_wr);
+	if (!ret)
+		++target->rx_head;
+
+	spin_unlock_irqrestore(target->scsi_host->host_lock, flags);
+
+	return ret;
+}
+
 static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 {
 	struct srp_request *req;
@@ -868,6 +900,7 @@ static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
 {
 	struct ib_device *dev;
 	struct srp_iu *iu;
+	int res;
 	u8 opcode;
 
 	iu = target->rx_ring[wc->wr_id];
@@ -879,21 +912,10 @@ static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
 	opcode = *(u8 *) iu->buf;
 
 	if (0) {
-		int i;
-
 		shost_printk(KERN_ERR, target->scsi_host,
 			     PFX "recv completion, opcode 0x%02x\n", opcode);
-
-		for (i = 0; i < wc->byte_len; ++i) {
-			if (i % 8 == 0)
-				printk(KERN_ERR "  [%02x] ", i);
-			printk(" %02x", ((u8 *) iu->buf)[i]);
-			if ((i + 1) % 8 == 0)
-				printk("\n");
-		}
-
-		if (wc->byte_len % 8)
-			printk("\n");
+		print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 8, 1,
+			       iu->buf, wc->byte_len, true);
 	}
 
 	switch (opcode) {
@@ -915,6 +937,11 @@ static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
 
 	ib_dma_sync_single_for_device(dev, iu->dma, target->max_ti_iu_len,
 				      DMA_FROM_DEVICE);
+
+	res = srp_post_recv(target);
+	if (res != 0)
+		shost_printk(KERN_ERR, target->scsi_host,
+			     PFX "Recv failed with error code %d\n", res);
 }
 
 static void srp_recv_completion(struct ib_cq *cq, void *target_ptr)
@@ -954,45 +981,6 @@ static void srp_send_completion(struct ib_cq *cq, void *target_ptr)
 	}
 }
 
-static int __srp_post_recv(struct srp_target_port *target)
-{
-	struct srp_iu *iu;
-	struct ib_sge list;
-	struct ib_recv_wr wr, *bad_wr;
-	unsigned int next;
-	int ret;
-
-	next 	 = target->rx_head & (SRP_RQ_SIZE - 1);
-	wr.wr_id = next;
-	iu 	 = target->rx_ring[next];
-
-	list.addr   = iu->dma;
-	list.length = iu->size;
-	list.lkey   = target->srp_host->srp_dev->mr->lkey;
-
-	wr.next     = NULL;
-	wr.sg_list  = &list;
-	wr.num_sge  = 1;
-
-	ret = ib_post_recv(target->qp, &wr, &bad_wr);
-	if (!ret)
-		++target->rx_head;
-
-	return ret;
-}
-
-static int srp_post_recv(struct srp_target_port *target)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(target->scsi_host->host_lock, flags);
-	ret = __srp_post_recv(target);
-	spin_unlock_irqrestore(target->scsi_host->host_lock, flags);
-
-	return ret;
-}
-
 /*
  * Must be called with target->scsi_host->host_lock held to protect
  * req_lim and tx_head.  Lock cannot be dropped between call here and
@@ -1102,11 +1090,6 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 		goto err;
 	}
 
-	if (__srp_post_recv(target)) {
-		shost_printk(KERN_ERR, target->scsi_host, PFX "Recv failed\n");
-		goto err_unmap;
-	}
-
 	ib_dma_sync_single_for_device(dev, iu->dma, srp_max_iu_len,
 				      DMA_TO_DEVICE);
 
@@ -1249,6 +1232,7 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
 	int attr_mask = 0;
 	int comp = 0;
 	int opcode = 0;
+	int i;
 
 	switch (event->event) {
 	case IB_CM_REQ_ERROR:
@@ -1298,7 +1282,11 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
 		if (target->status)
 			break;
 
-		target->status = srp_post_recv(target);
+		for (i = 0; i < SRP_RQ_SIZE; i++) {
+			target->status = srp_post_recv(target);
+			if (target->status)
+				break;
+		}
 		if (target->status)
 			break;
 
@@ -1564,6 +1552,18 @@ static ssize_t show_orig_dgid(struct device *dev,
 	return sprintf(buf, "%pI6\n", target->orig_dgid);
 }
 
+static ssize_t show_req_lim(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct srp_target_port *target = host_to_target(class_to_shost(dev));
+
+	if (target->state == SRP_TARGET_DEAD ||
+	    target->state == SRP_TARGET_REMOVED)
+		return -ENODEV;
+
+	return sprintf(buf, "%d\n", target->req_lim);
+}
+
 static ssize_t show_zero_req_lim(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
@@ -1598,6 +1598,7 @@ static DEVICE_ATTR(service_id,	    S_IRUGO, show_service_id,	   NULL);
 static DEVICE_ATTR(pkey,	    S_IRUGO, show_pkey,		   NULL);
 static DEVICE_ATTR(dgid,	    S_IRUGO, show_dgid,		   NULL);
 static DEVICE_ATTR(orig_dgid,	    S_IRUGO, show_orig_dgid,	   NULL);
+static DEVICE_ATTR(req_lim,         S_IRUGO, show_req_lim,         NULL);
 static DEVICE_ATTR(zero_req_lim,    S_IRUGO, show_zero_req_lim,	   NULL);
 static DEVICE_ATTR(local_ib_port,   S_IRUGO, show_local_ib_port,   NULL);
 static DEVICE_ATTR(local_ib_device, S_IRUGO, show_local_ib_device, NULL);
@@ -1609,6 +1610,7 @@ static struct device_attribute *srp_host_attrs[] = {
 	&dev_attr_pkey,
 	&dev_attr_dgid,
 	&dev_attr_orig_dgid,
+	&dev_attr_req_lim,
 	&dev_attr_zero_req_lim,
 	&dev_attr_local_ib_port,
 	&dev_attr_local_ib_device,
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 9946d73624b..9dfd6e5f786 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -115,7 +115,8 @@ static int __devinit ixp4xx_spkr_probe(struct platform_device *dev)
 	input_dev->event = ixp4xx_spkr_event;
 
 	err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
-			  IRQF_DISABLED | IRQF_TIMER, "ixp4xx-beeper", (void *) dev->id);
+			  IRQF_DISABLED | IRQF_NO_SUSPEND, "ixp4xx-beeper",
+			  (void *) dev->id);
 	if (err)
 		goto err_free_device;
 
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index 1dacae4b43f..f3bb92e9755 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -353,14 +353,12 @@ static struct of_platform_driver grover_beep_driver = {
 
 static int __init sparcspkr_init(void)
 {
-	int err = of_register_driver(&bbc_beep_driver,
-				     &of_platform_bus_type);
+	int err = of_register_platform_driver(&bbc_beep_driver);
 
 	if (!err) {
-		err = of_register_driver(&grover_beep_driver,
-					 &of_platform_bus_type);
+		err = of_register_platform_driver(&grover_beep_driver);
 		if (err)
-			of_unregister_driver(&bbc_beep_driver);
+			of_unregister_platform_driver(&bbc_beep_driver);
 	}
 
 	return err;
@@ -368,8 +366,8 @@ static int __init sparcspkr_init(void)
 
 static void __exit sparcspkr_exit(void)
 {
-	of_unregister_driver(&bbc_beep_driver);
-	of_unregister_driver(&grover_beep_driver);
+	of_unregister_platform_driver(&bbc_beep_driver);
+	of_unregister_platform_driver(&grover_beep_driver);
 }
 
 module_init(sparcspkr_init);
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 05edd75abca..a9cf7683163 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -205,8 +205,8 @@ struct atp {
 	bool			overflow_warned;
 	int			x_old;		/* last reported x/y, */
 	int			y_old;		/* used for smoothing */
-	u8			xy_cur[ATP_XSENSORS + ATP_YSENSORS];
-	u8			xy_old[ATP_XSENSORS + ATP_YSENSORS];
+	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
 	int			idlecount;	/* number of empty packets */
 	struct work_struct	work;
@@ -531,7 +531,7 @@ static void atp_complete_geyser_1_2(struct urb *urb)
 
 	for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
 		/* accumulate the change */
-		int change = dev->xy_old[i] - dev->xy_cur[i];
+		signed char change = dev->xy_old[i] - dev->xy_cur[i];
 		dev->xy_acc[i] -= change;
 
 		/* prevent down drifting */
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 847f4aad7ed..5d48bb66aa7 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -27,6 +27,11 @@
 #include <asm/irq.h>
 #elif defined(CONFIG_SH_CAYMAN)
 #include <asm/irq.h>
+#elif defined(CONFIG_PPC)
+extern int of_i8042_kbd_irq;
+extern int of_i8042_aux_irq;
+# define I8042_KBD_IRQ  of_i8042_kbd_irq
+# define I8042_AUX_IRQ  of_i8042_aux_irq
 #else
 # define I8042_KBD_IRQ	1
 # define I8042_AUX_IRQ	12
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index 04e32f2d124..cb2a24b9474 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -58,9 +58,9 @@ static int __devinit sparc_i8042_probe(struct of_device *op, const struct of_dev
 		if (!strcmp(dp->name, OBP_PS2KBD_NAME1) ||
 		    !strcmp(dp->name, OBP_PS2KBD_NAME2)) {
 			struct of_device *kbd = of_find_device_by_node(dp);
-			unsigned int irq = kbd->irqs[0];
+			unsigned int irq = kbd->archdata.irqs[0];
 			if (irq == 0xffffffff)
-				irq = op->irqs[0];
+				irq = op->archdata.irqs[0];
 			i8042_kbd_irq = irq;
 			kbd_iobase = of_ioremap(&kbd->resource[0],
 						0, 8, "kbd");
@@ -68,9 +68,9 @@ static int __devinit sparc_i8042_probe(struct of_device *op, const struct of_dev
 		} else if (!strcmp(dp->name, OBP_PS2MS_NAME1) ||
 			   !strcmp(dp->name, OBP_PS2MS_NAME2)) {
 			struct of_device *ms = of_find_device_by_node(dp);
-			unsigned int irq = ms->irqs[0];
+			unsigned int irq = ms->archdata.irqs[0];
 			if (irq == 0xffffffff)
-				irq = op->irqs[0];
+				irq = op->archdata.irqs[0];
 			i8042_aux_irq = irq;
 		}
 
@@ -116,8 +116,7 @@ static int __init i8042_platform_init(void)
 		if (!kbd_iobase)
 			return -ENODEV;
 	} else {
-		int err = of_register_driver(&sparc_i8042_driver,
-					     &of_bus_type);
+		int err = of_register_platform_driver(&sparc_i8042_driver);
 		if (err)
 			return err;
 
@@ -141,7 +140,7 @@ static inline void i8042_platform_exit(void)
 	struct device_node *root = of_find_node_by_path("/");
 
 	if (strcmp(root->name, "SUNW,JavaStation-1"))
-		of_unregister_driver(&sparc_i8042_driver);
+		of_unregister_platform_driver(&sparc_i8042_driver);
 }
 
 #else /* !CONFIG_PCI */
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index e14081675bb..ebb11907d40 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -339,7 +339,7 @@ static struct xenbus_driver xenkbd_driver = {
 
 static int __init xenkbd_init(void)
 {
-	if (!xen_domain())
+	if (!xen_pv_domain())
 		return -ENODEV;
 
 	/* Nothing to do if running in dom0. */
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 0ded3640b92..707d9c94cf9 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -1914,11 +1914,13 @@ static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
 	 * The next command will reopen the AT channel automatically.
 	 */
 	if (cb->len == 3 && !memcmp(cb->buf, "+++", 3)) {
-		kfree(cb);
 		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
 		if (cb->wake_tasklet)
 			tasklet_schedule(cb->wake_tasklet);
-		return rc < 0 ? rc : cb->len;
+		if (!rc)
+			rc = cb->len;
+		kfree(cb);
+		return rc;
 	}
 
 	spin_lock_irqsave(&cs->cmdlock, flags);
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index e5ea344a551..bcc174e4f3b 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1052,6 +1052,7 @@ static inline void remove_appl_from_channel(struct bc_state *bcs,
 	do {
 		if (bcap->bcnext == ap) {
 			bcap->bcnext = bcap->bcnext->bcnext;
+			spin_unlock_irqrestore(&bcs->aplock, flags);
 			return;
 		}
 		bcap = bcap->bcnext;
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index f410d0eb2fe..09b1795516f 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -76,9 +75,8 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
 {
 
     /* The io structure describes IO port mapping */
-    p_dev->io.NumPorts1 = 16;
-    p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    p_dev->io.NumPorts2 = 0;
+    p_dev->resource[0]->end = 16;
+    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -120,13 +118,9 @@ static int avmcs_configcheck(struct pcmcia_device *p_dev,
 	if (cf->io.nwin <= 0)
 		return -ENODEV;
 
-	p_dev->io.BasePort1 = cf->io.win[0].base;
-	p_dev->io.NumPorts1 = cf->io.win[0].len;
-	p_dev->io.NumPorts2 = 0;
-	printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
-	       p_dev->io.BasePort1,
-	       p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cf->io.win[0].base;
+	p_dev->resource[0]->end = cf->io.win[0].len;
+	return pcmcia_request_io(p_dev);
 }
 
 static int avmcs_config(struct pcmcia_device *link)
@@ -192,9 +186,10 @@ static int avmcs_config(struct pcmcia_device *link)
 	default:
         case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
     }
-    if ((i = (*addcard)(link->io.BasePort1, link->irq)) < 0) {
-	    dev_err(&link->dev, "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
-		    link->io.BasePort1, link->irq);
+    if ((i = (*addcard)(link->resource[0]->start, link->irq)) < 0) {
+	    dev_err(&link->dev,
+		    "avm_cs: failed to add AVM-Controller at i/o %#x, irq %d\n",
+		    (unsigned int) link->resource[0]->start, link->irq);
 	    avmcs_release(link);
 	    return -ENODEV;
     }
@@ -212,7 +207,7 @@ static int avmcs_config(struct pcmcia_device *link)
 
 static void avmcs_release(struct pcmcia_device *link)
 {
-	b1pcmcia_delcard(link->io.BasePort1, link->irq);
+	b1pcmcia_delcard(link->resource[0]->start, link->irq);
 	pcmcia_disable_device(link);
 } /* avmcs_release */
 
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index a80a7617f16..94263c22b87 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -20,7 +20,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -79,11 +78,10 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
     dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
 
     /* The io structure describes IO port mapping */
-    p_dev->io.NumPorts1 = 16;
-    p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    p_dev->io.NumPorts2 = 16;
-    p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
-    p_dev->io.IOAddrLines = 5;
+    p_dev->resource[0]->end = 16;
+    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    p_dev->resource[1]->end = 16;
+    p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
 
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -127,13 +125,10 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
 	if (cf->io.nwin <= 0)
 		return -ENODEV;
 
-	p_dev->io.BasePort1 = cf->io.win[0].base;
-	p_dev->io.NumPorts1 = cf->io.win[0].len;
-	p_dev->io.NumPorts2 = 0;
-	printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
-	       p_dev->io.BasePort1,
-	       p_dev->io.BasePort1+p_dev->io.NumPorts1-1);
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cf->io.win[0].base;
+	p_dev->resource[0]->end = cf->io.win[0].len;
+	p_dev->io_lines = 5;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -181,16 +176,18 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
     }
 
     printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
-				link->io.BasePort1, link->irq);
+		(unsigned int) link->resource[0]->start, link->irq);
 
     icard.para[0] = link->irq;
-    icard.para[1] = link->io.BasePort1;
+    icard.para[1] = link->resource[0]->start;
     icard.protocol = isdnprot;
     icard.typ = ISDN_CTYPE_A1_PCMCIA;
     
     i = hisax_init_pcmcia(link, &busy, &icard);
     if (i < 0) {
-    	printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
+	printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 "
+			"PCMCIA %d at i/o %#x\n", i,
+			(unsigned int) link->resource[0]->start);
 	avma1cs_release(link);
 	return -ENODEV;
     }
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 218927e3a4e..b3c08aaf41c 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -127,9 +126,8 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
       and attributes of IO windows) are fixed by the nature of the
       device, and can be hard-wired here.
     */
-    link->io.NumPorts1 = 8;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 3;
+    link->resource[0]->end = 8;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -174,16 +172,18 @@ static int elsa_cs_configcheck(struct pcmcia_device *p_dev,
 {
 	int j;
 
+	p_dev->io_lines = 3;
+
 	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
 		printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	} else {
 		printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
 		for (j = 0x2f0; j > 0x100; j -= 0x10) {
-			p_dev->io.BasePort1 = j;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[0]->start = j;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
@@ -215,23 +215,21 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
 	    link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	printk(", irq %d", link->irq);
-    if (link->io.NumPorts1)
-        printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-               link->io.BasePort1+link->io.NumPorts1-1);
-    if (link->io.NumPorts2)
-        printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-               link->io.BasePort2+link->io.NumPorts2-1);
+    if (link->resource[0])
+	printk(" & %pR", link->resource[0]);
+    if (link->resource[1])
+	printk(" & %pR", link->resource[1]);
     printk("\n");
 
     icard.para[0] = link->irq;
-    icard.para[1] = link->io.BasePort1;
+    icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
     
     i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
     if (i < 0) {
-    	printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n",
-    		i, link->io.BasePort1);
+	printk(KERN_ERR "elsa_cs: failed to initialize Elsa "
+		"PCMCIA %d with %pR\n", i, link->resource[0]);
     	elsa_cs_release(link);
     } else
     	((local_info_t*)link->priv)->cardnr = i;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 1f4feaab21a..a024192b672 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -46,7 +46,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -130,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     /* from old sedl_cs 
     */
     /* The io structure describes IO port mapping */
-    link->io.NumPorts1 = 8;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    link->io.IOAddrLines = 3;
+    link->resource[0]->end = 8;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
     link->conf.Attributes = 0;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -173,8 +171,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  unsigned int vcc,
 				  void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -202,52 +198,25 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		p_dev->io_lines = 3;
+		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 	}
 
-	/*
-	  Now set up a common memory window, if needed.  There is room
-	  in the struct pcmcia_device structure for one memory window handle,
-	  but if the base addresses need to be saved, or if multiple
-	  windows are needed, the info should go in the private data
-	  structure for this device.
-
-	  Note that the memory window base is a physical address, and
-	  needs to be mapped to virtual space with ioremap() before it
-	  is used.
-	*/
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		memreq_t map;
-		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
-			return -ENODEV;
-	}
 	return 0;
 }
 
@@ -255,16 +224,11 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 
 static int __devinit sedlbauer_config(struct pcmcia_device *link)
 {
-    win_req_t *req;
     int ret;
     IsdnCard_t  icard;
 
     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
-    req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
-    if (!req)
-	    return -ENOMEM;
-
     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
@@ -277,7 +241,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
-    ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+    ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
     if (ret)
 	    goto failed;
 
@@ -297,27 +261,22 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	printk(", irq %d", link->irq);
-    if (link->io.NumPorts1)
-	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-	       link->io.BasePort1+link->io.NumPorts1-1);
-    if (link->io.NumPorts2)
-	printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-	       link->io.BasePort2+link->io.NumPorts2-1);
-    if (link->win)
-	printk(", mem 0x%06lx-0x%06lx", req->Base,
-	       req->Base+req->Size-1);
+    if (link->resource[0])
+	printk(" & %pR", link->resource[0]);
+    if (link->resource[1])
+	printk(" & %pR", link->resource[1]);
     printk("\n");
 
     icard.para[0] = link->irq;
-    icard.para[1] = link->io.BasePort1;
+    icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
     
     ret = hisax_init_pcmcia(link, 
 			    &(((local_info_t *)link->priv)->stop), &icard);
     if (ret < 0) {
-	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
-		ret, link->io.BasePort1);
+	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n",
+		ret, link->resource[0]);
     	sedlbauer_release(link);
 	return -ENODEV;
     } else
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 5771955cc53..7296102ca25 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -27,7 +27,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -107,9 +106,8 @@ static int __devinit teles_probe(struct pcmcia_device *link)
       and attributes of IO windows) are fixed by the nature of the
       device, and can be hard-wired here.
     */
-    link->io.NumPorts1 = 96;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 5;
+    link->resource[0]->end = 96;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -154,16 +152,18 @@ static int teles_cs_configcheck(struct pcmcia_device *p_dev,
 {
 	int j;
 
+	p_dev->io_lines = 5;
+
 	if ((cf->io.nwin > 0) && cf->io.win[0].base) {
 		printk(KERN_INFO "(teles_cs: looks like the 96 model)\n");
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	} else {
 		printk(KERN_INFO "(teles_cs: looks like the 97 model)\n");
 		for (j = 0x2f0; j > 0x100; j -= 0x10) {
-			p_dev->io.BasePort1 = j;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[0]->start = j;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
@@ -195,23 +195,21 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
 	    link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	    printk(", irq %d", link->irq);
-    if (link->io.NumPorts1)
-        printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-               link->io.BasePort1+link->io.NumPorts1-1);
-    if (link->io.NumPorts2)
-        printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-               link->io.BasePort2+link->io.NumPorts2-1);
+    if (link->resource[0])
+	printk(" & %pR", link->resource[0]);
+    if (link->resource[1])
+	printk(" & %pR", link->resource[1]);
     printk("\n");
 
     icard.para[0] = link->irq;
-    icard.para[1] = link->io.BasePort1;
+    icard.para[1] = link->resource[0]->start;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_TELESPCMCIA;
     
     i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
     if (i < 0) {
     	printk(KERN_ERR "teles_cs: failed to initialize Teles PCMCIA %d at i/o %#x\n",
-    		i, link->io.BasePort1);
+			i, (unsigned int) link->resource[0]->start);
     	teles_cs_release(link);
 	return -ENODEV;
     }
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 43c5dc3516e..4cfdbe08ffd 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -174,7 +174,7 @@ int sc_ioctl(int card, scs_ioctl *data)
 		pr_debug("%s: SCIOGETSPID: ioctl received\n",
 				sc_adapter[card]->devicename);
 
-		spid = kmalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
+		spid = kzalloc(SCIOC_SPIDSIZE, GFP_KERNEL);
 		if (!spid) {
 			kfree(rcvmsg);
 			return -ENOMEM;
@@ -194,7 +194,7 @@ int sc_ioctl(int card, scs_ioctl *data)
 			kfree(rcvmsg);
 			return status;
 		}
-		strcpy(spid, rcvmsg->msg_data.byte_array);
+		strlcpy(spid, rcvmsg->msg_data.byte_array, SCIOC_SPIDSIZE);
 
 		/*
 		 * Package the switch type and send to user space
@@ -266,12 +266,12 @@ int sc_ioctl(int card, scs_ioctl *data)
 			return status;
 		}
 
-		dn = kmalloc(SCIOC_DNSIZE, GFP_KERNEL);
+		dn = kzalloc(SCIOC_DNSIZE, GFP_KERNEL);
 		if (!dn) {
 			kfree(rcvmsg);
 			return -ENOMEM;
 		}
-		strcpy(dn, rcvmsg->msg_data.byte_array);
+		strlcpy(dn, rcvmsg->msg_data.byte_array, SCIOC_DNSIZE);
 		kfree(rcvmsg);
 
 		/*
@@ -337,7 +337,7 @@ int sc_ioctl(int card, scs_ioctl *data)
 		pr_debug("%s: SCIOSTAT: ioctl received\n",
 				sc_adapter[card]->devicename);
 
-		bi = kmalloc (sizeof(boardInfo), GFP_KERNEL);
+		bi = kzalloc(sizeof(boardInfo), GFP_KERNEL);
 		if (!bi) {
 			kfree(rcvmsg);
 			return -ENOMEM;
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index 5dcdf9d69b3..19dc4b61a10 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -351,7 +351,7 @@ static ssize_t bd2802_store_reg##reg_addr(struct device *dev,		\
 	return count;							\
 }									\
 static struct device_attribute bd2802_reg##reg_addr##_attr = {		\
-	.attr = {.name = reg_name, .mode = 0644, .owner = THIS_MODULE},	\
+	.attr = {.name = reg_name, .mode = 0644},			\
 	.store = bd2802_store_reg##reg_addr,				\
 };
 
@@ -482,7 +482,6 @@ static struct device_attribute bd2802_adv_conf_attr = {
 	.attr = {
 		.name = "advanced_configuration",
 		.mode = 0644,
-		.owner = THIS_MODULE
 	},
 	.show = bd2802_show_adv_conf,
 	.store = bd2802_store_adv_conf,
@@ -519,7 +518,6 @@ static struct device_attribute bd2802_##attr_name##_attr = {		\
 	.attr = {							\
 		.name = name_str,					\
 		.mode = 0644,						\
-		.owner = THIS_MODULE					\
 	},								\
 	.show = bd2802_show_##attr_name,				\
 	.store = bd2802_store_##attr_name,				\
diff --git a/drivers/macintosh/macio_sysfs.c b/drivers/macintosh/macio_sysfs.c
index 6999ce59fd1..6024038a5b9 100644
--- a/drivers/macintosh/macio_sysfs.c
+++ b/drivers/macintosh/macio_sysfs.c
@@ -41,10 +41,7 @@ compatible_show (struct device *dev, struct device_attribute *attr, char *buf)
 static ssize_t modalias_show (struct device *dev, struct device_attribute *attr,
 			      char *buf)
 {
-	struct of_device *ofdev = to_of_device(dev);
-	int len;
-
-	len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2);
+	int len = of_device_get_modalias(dev, buf, PAGE_SIZE - 2);
 
 	buf[len] = '\n';
 	buf[len+1] = 0;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 3d4fc0f7b00..35bc2737412 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -400,11 +400,12 @@ static int __init via_pmu_start(void)
 		printk(KERN_ERR "via-pmu: can't map interrupt\n");
 		return -ENODEV;
 	}
-	/* We set IRQF_TIMER because we don't want the interrupt to be disabled
-	 * between the 2 passes of driver suspend, we control our own disabling
-	 * for that one
+	/* We set IRQF_NO_SUSPEND because we don't want the interrupt
+	 * to be disabled between the 2 passes of driver suspend, we
+	 * control our own disabling for that one
 	 */
-	if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) {
+	if (request_irq(irq, via_pmu_interrupt, IRQF_NO_SUSPEND,
+			"VIA-PMU", (void *)0)) {
 		printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
 		return -ENODEV;
 	}
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
index 75afe4f81e3..7424b0493f9 100644
--- a/drivers/media/dvb/firewire/firedtv-fw.c
+++ b/drivers/media/dvb/firewire/firedtv-fw.c
@@ -194,8 +194,8 @@ static const struct firedtv_backend backend = {
 
 static void handle_fcp(struct fw_card *card, struct fw_request *request,
 		       int tcode, int destination, int source, int generation,
-		       int speed, unsigned long long offset,
-		       void *payload, size_t length, void *callback_data)
+		       unsigned long long offset, void *payload, size_t length,
+		       void *callback_data)
 {
 	struct firedtv *f, *fdtv = NULL;
 	struct fw_device *device;
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 90daa6e751d..07c5c18a25c 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -705,6 +705,8 @@ done:
  */
 static int __devinit ivtv_init_struct1(struct ivtv *itv)
 {
+	struct sched_param param = { .sched_priority = 99 };
+
 	itv->base_addr = pci_resource_start(itv->pdev, 0);
 	itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */
 	itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */
@@ -716,13 +718,17 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
 	spin_lock_init(&itv->lock);
 	spin_lock_init(&itv->dma_reg_lock);
 
-	itv->irq_work_queues = create_singlethread_workqueue(itv->v4l2_dev.name);
-	if (itv->irq_work_queues == NULL) {
-		IVTV_ERR("Could not create ivtv workqueue\n");
+	init_kthread_worker(&itv->irq_worker);
+	itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker,
+					   itv->v4l2_dev.name);
+	if (IS_ERR(itv->irq_worker_task)) {
+		IVTV_ERR("Could not create ivtv task\n");
 		return -1;
 	}
+	/* must use the FIFO scheduler as it is realtime sensitive */
+	sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, &param);
 
-	INIT_WORK(&itv->irq_work_queue, ivtv_irq_work_handler);
+	init_kthread_work(&itv->irq_work, ivtv_irq_work_handler);
 
 	/* start counting open_id at 1 */
 	itv->open_id = 1;
@@ -1006,7 +1012,7 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	/* PCI Device Setup */
 	retval = ivtv_setup_pci(itv, pdev, pci_id);
 	if (retval == -EIO)
-		goto free_workqueue;
+		goto free_worker;
 	if (retval == -ENXIO)
 		goto free_mem;
 
@@ -1218,8 +1224,8 @@ free_mem:
 	release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	if (itv->has_cx23415)
 		release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE);
-free_workqueue:
-	destroy_workqueue(itv->irq_work_queues);
+free_worker:
+	kthread_stop(itv->irq_worker_task);
 err:
 	if (retval == 0)
 		retval = -ENODEV;
@@ -1363,9 +1369,9 @@ static void ivtv_remove(struct pci_dev *pdev)
 	ivtv_set_irq_mask(itv, 0xffffffff);
 	del_timer_sync(&itv->dma_timer);
 
-	/* Stop all Work Queues */
-	flush_workqueue(itv->irq_work_queues);
-	destroy_workqueue(itv->irq_work_queues);
+	/* Kill irq worker */
+	flush_kthread_worker(&itv->irq_worker);
+	kthread_stop(itv->irq_worker_task);
 
 	ivtv_streams_cleanup(itv, 1);
 	ivtv_udma_free(itv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index bd084df4448..10207124621 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -51,7 +51,7 @@
 #include <linux/unistd.h>
 #include <linux/pagemap.h>
 #include <linux/scatterlist.h>
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <asm/uaccess.h>
@@ -260,7 +260,6 @@ struct ivtv_mailbox_data {
 #define IVTV_F_I_DEC_PAUSED	   20 	/* the decoder is paused */
 #define IVTV_F_I_INITED		   21 	/* set after first open */
 #define IVTV_F_I_FAILED		   22 	/* set if first open failed */
-#define IVTV_F_I_WORK_INITED       23	/* worker thread was initialized */
 
 /* Event notifications */
 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
@@ -666,8 +665,9 @@ struct ivtv {
 	/* Interrupts & DMA */
 	u32 irqmask;                    /* active interrupts */
 	u32 irq_rr_idx;                 /* round-robin stream index */
-	struct workqueue_struct *irq_work_queues;       /* workqueue for PIO/YUV/VBI actions */
-	struct work_struct irq_work_queue;              /* work entry */
+	struct kthread_worker irq_worker;		/* kthread worker for PIO/YUV/VBI actions */
+	struct task_struct *irq_worker_task;		/* task for irq_worker */
+	struct kthread_work irq_work;	/* kthread work entry */
 	spinlock_t dma_reg_lock;        /* lock access to DMA engine registers */
 	int cur_dma_stream;		/* index of current stream doing DMA (-1 if none) */
 	int cur_pio_stream;		/* index of current stream doing PIO (-1 if none) */
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index fea1ec33b0d..9b4faf00919 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -71,19 +71,10 @@ static void ivtv_pio_work_handler(struct ivtv *itv)
 	write_reg(IVTV_IRQ_ENC_PIO_COMPLETE, 0x44);
 }
 
-void ivtv_irq_work_handler(struct work_struct *work)
+void ivtv_irq_work_handler(struct kthread_work *work)
 {
-	struct ivtv *itv = container_of(work, struct ivtv, irq_work_queue);
+	struct ivtv *itv = container_of(work, struct ivtv, irq_work);
 
-	DEFINE_WAIT(wait);
-
-	if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
-		struct sched_param param = { .sched_priority = 99 };
-
-		/* This thread must use the FIFO scheduler as it
-		   is realtime sensitive. */
-		sched_setscheduler(current, SCHED_FIFO, &param);
-	}
 	if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
 		ivtv_pio_work_handler(itv);
 
@@ -975,7 +966,7 @@ irqreturn_t ivtv_irq_handler(int irq, void *dev_id)
 	}
 
 	if (test_and_clear_bit(IVTV_F_I_HAVE_WORK, &itv->i_flags)) {
-		queue_work(itv->irq_work_queues, &itv->irq_work_queue);
+		queue_kthread_work(&itv->irq_worker, &itv->irq_work);
 	}
 
 	spin_unlock(&itv->dma_reg_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.h b/drivers/media/video/ivtv/ivtv-irq.h
index f879a5822e7..1e84433737c 100644
--- a/drivers/media/video/ivtv/ivtv-irq.h
+++ b/drivers/media/video/ivtv/ivtv-irq.h
@@ -46,7 +46,7 @@
 
 irqreturn_t ivtv_irq_handler(int irq, void *dev_id);
 
-void ivtv_irq_work_handler(struct work_struct *work);
+void ivtv_irq_work_handler(struct kthread_work *work);
 void ivtv_dma_stream_dec_prepare(struct ivtv_stream *s, u32 offset, int lock);
 void ivtv_unfinished_dma(unsigned long arg);
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9b089dfb173..0b591b65824 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -72,7 +72,7 @@ config ATMEL_TCLIB
 
 config ATMEL_TCB_CLKSRC
 	bool "TC Block Clocksource"
-	depends on ATMEL_TCLIB && GENERIC_TIME
+	depends on ATMEL_TCLIB
 	default y
 	help
 	  Select this to get a high precision clocksource based on a
@@ -240,7 +240,7 @@ config CS5535_MFGPT_DEFAULT_IRQ
 
 config CS5535_CLOCK_EVENT_SRC
 	tristate "CS5535/CS5536 high-res timer (MFGPT) events"
-	depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT
+	depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
 	help
 	  This driver provides a clock event source based on the MFGPT
 	  timer(s) in the CS5535 and CS5536 companion chips.
@@ -304,6 +304,23 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
+config SENSORS_BH1780
+	tristate "ROHM BH1780GLI ambient light sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the ROHM BH1780GLI
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called bh1780gli.
+
+config HMC6352
+	tristate "Honeywell HMC6352 compass"
+	depends on I2C
+	help
+	  This driver provides support for the Honeywell HMC6352 compass,
+	  providing configuration and heading data via sysfs.
+
 config EP93XX_PWM
 	tristate "EP93xx PWM support"
 	depends on ARCH_EP93XX
@@ -363,6 +380,16 @@ config ARM_CHARLCD
 	  line and the Linux version on the second line, but that's
 	  still useful.
 
+config BMP085
+	tristate "BMP085 digital pressure sensor"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get support for the Bosch Sensortec
+	  BMP086 digital pressure sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bmp085.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 67552d6e932..255a80dc9d7 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -9,11 +9,13 @@ obj-$(CONFIG_AD525X_DPOT_SPI)	+= ad525x_dpot-spi.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_BMP085)		+= bmp085.o
 obj-$(CONFIG_ICS932S401)	+= ics932s401.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
 obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)		+= phantom.o
+obj-$(CONFIG_SENSORS_BH1780)	+= bh1780gli.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
@@ -28,6 +30,7 @@ obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_TI_DAC7512)	+= ti_dac7512.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
+obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
new file mode 100644
index 00000000000..714c6b48731
--- /dev/null
+++ b/drivers/misc/bh1780gli.c
@@ -0,0 +1,273 @@
+/*
+ * bh1780gli.c
+ * ROHM Ambient Light Sensor Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define BH1780_REG_CONTROL	0x80
+#define BH1780_REG_PARTID	0x8A
+#define BH1780_REG_MANFID	0x8B
+#define BH1780_REG_DLOW	0x8C
+#define BH1780_REG_DHIGH	0x8D
+
+#define BH1780_REVMASK		(0xf)
+#define BH1780_POWMASK		(0x3)
+#define BH1780_POFF		(0x0)
+#define BH1780_PON		(0x3)
+
+/* power on settling time in ms */
+#define BH1780_PON_DELAY	2
+
+struct bh1780_data {
+	struct i2c_client *client;
+	int power_state;
+	/* lock for sysfs operations */
+	struct mutex lock;
+};
+
+static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
+{
+	int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
+	if (ret < 0)
+		dev_err(&ddata->client->dev,
+			"i2c_smbus_write_byte_data failed error %d\
+			Register (%s)\n", ret, msg);
+	return ret;
+}
+
+static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
+{
+	int ret = i2c_smbus_read_byte_data(ddata->client, reg);
+	if (ret < 0)
+		dev_err(&ddata->client->dev,
+			"i2c_smbus_read_byte_data failed error %d\
+			 Register (%s)\n", ret, msg);
+	return ret;
+}
+
+static ssize_t bh1780_show_lux(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	int lsb, msb;
+
+	lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
+	if (lsb < 0)
+		return lsb;
+
+	msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
+	if (msb < 0)
+		return msb;
+
+	return sprintf(buf, "%d\n", (msb << 8) | lsb);
+}
+
+static ssize_t bh1780_show_power_state(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	int state;
+
+	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+	if (state < 0)
+		return state;
+
+	return sprintf(buf, "%d\n", state & BH1780_POWMASK);
+}
+
+static ssize_t bh1780_store_power_state(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct bh1780_data *ddata = platform_get_drvdata(pdev);
+	unsigned long val;
+	int error;
+
+	error = strict_strtoul(buf, 0, &val);
+	if (error)
+		return error;
+
+	if (val < BH1780_POFF || val > BH1780_PON)
+		return -EINVAL;
+
+	mutex_lock(&ddata->lock);
+
+	error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
+	if (error < 0) {
+		mutex_unlock(&ddata->lock);
+		return error;
+	}
+
+	msleep(BH1780_PON_DELAY);
+	ddata->power_state = val;
+	mutex_unlock(&ddata->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+		bh1780_show_power_state, bh1780_store_power_state);
+
+static struct attribute *bh1780_attributes[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_lux.attr,
+	NULL
+};
+
+static const struct attribute_group bh1780_attr_group = {
+	.attrs = bh1780_attributes,
+};
+
+static int __devinit bh1780_probe(struct i2c_client *client,
+						const struct i2c_device_id *id)
+{
+	int ret;
+	struct bh1780_data *ddata = NULL;
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+		ret = -EIO;
+		goto err_op_failed;
+	}
+
+	ddata = kzalloc(sizeof(struct bh1780_data), GFP_KERNEL);
+	if (ddata == NULL) {
+		ret = -ENOMEM;
+		goto err_op_failed;
+	}
+
+	ddata->client = client;
+	i2c_set_clientdata(client, ddata);
+
+	ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
+	if (ret < 0)
+		goto err_op_failed;
+
+	dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
+			(ret & BH1780_REVMASK));
+
+	mutex_init(&ddata->lock);
+
+	ret = sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
+	if (ret)
+		goto err_op_failed;
+
+	return 0;
+
+err_op_failed:
+	kfree(ddata);
+	return ret;
+}
+
+static int __devexit bh1780_remove(struct i2c_client *client)
+{
+	struct bh1780_data *ddata;
+
+	ddata = i2c_get_clientdata(client);
+	sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
+	i2c_set_clientdata(client, NULL);
+	kfree(ddata);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bh1780_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	struct bh1780_data *ddata;
+	int state, ret;
+
+	ddata = i2c_get_clientdata(client);
+	state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
+	if (state < 0)
+		return state;
+
+	ddata->power_state = state & BH1780_POWMASK;
+
+	ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
+				"CONTROL");
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int bh1780_resume(struct i2c_client *client)
+{
+	struct bh1780_data *ddata;
+	int state, ret;
+
+	ddata = i2c_get_clientdata(client);
+	state = ddata->power_state;
+
+	ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
+				"CONTROL");
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#else
+#define bh1780_suspend NULL
+#define bh1780_resume NULL
+#endif /* CONFIG_PM */
+
+static const struct i2c_device_id bh1780_id[] = {
+	{ "bh1780", 0 },
+	{ },
+};
+
+static struct i2c_driver bh1780_driver = {
+	.probe		= bh1780_probe,
+	.remove		= bh1780_remove,
+	.id_table	= bh1780_id,
+	.suspend	= bh1780_suspend,
+	.resume		= bh1780_resume,
+	.driver = {
+		.name = "bh1780"
+	},
+};
+
+static int __init bh1780_init(void)
+{
+	return i2c_add_driver(&bh1780_driver);
+}
+
+static void __exit bh1780_exit(void)
+{
+	i2c_del_driver(&bh1780_driver);
+}
+
+module_init(bh1780_init)
+module_exit(bh1780_exit)
+
+MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
new file mode 100644
index 00000000000..63ee4c1a531
--- /dev/null
+++ b/drivers/misc/bmp085.c
@@ -0,0 +1,482 @@
+/*  Copyright (c) 2010  Christoph Mair <christoph.mair@gmail.com>
+
+    This driver supports the bmp085 digital barometric pressure
+    and temperature sensor from Bosch Sensortec. The datasheet
+    is avaliable from their website:
+    http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+
+    A pressure measurement is issued by reading from pressure0_input.
+    The return value ranges from 30000 to 110000 pascal with a resulution
+    of 1 pascal (0.01 millibar) which enables measurements from 9000m above
+    to 500m below sea level.
+
+    The temperature can be read from temp0_input. Values range from
+    -400 to 850 representing the ambient temperature in degree celsius
+    multiplied by 10.The resolution is 0.1 celsius.
+
+    Because ambient pressure is temperature dependent, a temperature
+    measurement will be executed automatically even if the user is reading
+    from pressure0_input. This happens if the last temperature measurement
+    has been executed more then one second ago.
+
+    To decrease RMS noise from pressure measurements, the bmp085 can
+    autonomously calculate the average of up to eight samples. This is
+    set up by writing to the oversampling sysfs file. Accepted values
+    are 0, 1, 2 and 3. 2^x when x is the value written to this file
+    specifies the number of samples used to calculate the ambient pressure.
+    RMS noise is specified with six pascal (without averaging) and decreases
+    down to 3 pascal when using an oversampling setting of 3.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+
+#define BMP085_I2C_ADDRESS		0x77
+#define BMP085_CHIP_ID			0x55
+
+#define BMP085_CALIBRATION_DATA_START	0xAA
+#define BMP085_CALIBRATION_DATA_LENGTH	11	/* 16 bit values */
+#define BMP085_CHIP_ID_REG		0xD0
+#define BMP085_VERSION_REG		0xD1
+#define BMP085_CTRL_REG			0xF4
+#define BMP085_TEMP_MEASUREMENT		0x2E
+#define BMP085_PRESSURE_MEASUREMENT	0x34
+#define BMP085_CONVERSION_REGISTER_MSB	0xF6
+#define BMP085_CONVERSION_REGISTER_LSB	0xF7
+#define BMP085_CONVERSION_REGISTER_XLSB	0xF8
+#define BMP085_TEMP_CONVERSION_TIME	5
+
+#define BMP085_CLIENT_NAME		"bmp085"
+
+
+static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
+							I2C_CLIENT_END };
+
+struct bmp085_calibration_data {
+	s16 AC1, AC2, AC3;
+	u16 AC4, AC5, AC6;
+	s16 B1, B2;
+	s16 MB, MC, MD;
+};
+
+
+/* Each client has this additional data */
+struct bmp085_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	struct bmp085_calibration_data calibration;
+	u32 raw_temperature;
+	u32 raw_pressure;
+	unsigned char oversampling_setting;
+	u32 last_temp_measurement;
+	s32 b6; /* calculated temperature correction coefficient */
+};
+
+
+static s32 bmp085_read_calibration_data(struct i2c_client *client)
+{
+	u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
+	struct bmp085_data *data = i2c_get_clientdata(client);
+	struct bmp085_calibration_data *cali = &(data->calibration);
+	s32 status = i2c_smbus_read_i2c_block_data(client,
+				BMP085_CALIBRATION_DATA_START,
+				BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16),
+				(u8 *)tmp);
+	if (status < 0)
+		return status;
+
+	if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16))
+		return -EIO;
+
+	cali->AC1 =  be16_to_cpu(tmp[0]);
+	cali->AC2 =  be16_to_cpu(tmp[1]);
+	cali->AC3 =  be16_to_cpu(tmp[2]);
+	cali->AC4 =  be16_to_cpu(tmp[3]);
+	cali->AC5 =  be16_to_cpu(tmp[4]);
+	cali->AC6 = be16_to_cpu(tmp[5]);
+	cali->B1 = be16_to_cpu(tmp[6]);
+	cali->B2 = be16_to_cpu(tmp[7]);
+	cali->MB = be16_to_cpu(tmp[8]);
+	cali->MC = be16_to_cpu(tmp[9]);
+	cali->MD = be16_to_cpu(tmp[10]);
+	return 0;
+}
+
+
+static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
+{
+	u16 tmp;
+	s32 status;
+
+	mutex_lock(&data->lock);
+	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+						BMP085_TEMP_MEASUREMENT);
+	if (status != 0) {
+		dev_err(&data->client->dev,
+			"Error while requesting temperature measurement.\n");
+		goto exit;
+	}
+	msleep(BMP085_TEMP_CONVERSION_TIME);
+
+	status = i2c_smbus_read_i2c_block_data(data->client,
+		BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
+	if (status < 0)
+		goto exit;
+	if (status != sizeof(tmp)) {
+		dev_err(&data->client->dev,
+			"Error while reading temperature measurement result\n");
+		status = -EIO;
+		goto exit;
+	}
+	data->raw_temperature = be16_to_cpu(tmp);
+	data->last_temp_measurement = jiffies;
+	status = 0;	/* everything ok, return 0 */
+
+exit:
+	mutex_unlock(&data->lock);
+	return status;
+}
+
+static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
+{
+	u32 tmp = 0;
+	s32 status;
+
+	mutex_lock(&data->lock);
+	status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+		BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6));
+	if (status != 0) {
+		dev_err(&data->client->dev,
+			"Error while requesting pressure measurement.\n");
+		goto exit;
+	}
+
+	/* wait for the end of conversion */
+	msleep(2+(3 << data->oversampling_setting));
+
+	/* copy data into a u32 (4 bytes), but skip the first byte. */
+	status = i2c_smbus_read_i2c_block_data(data->client,
+			BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
+	if (status < 0)
+		goto exit;
+	if (status != 3) {
+		dev_err(&data->client->dev,
+			"Error while reading pressure measurement results\n");
+		status = -EIO;
+		goto exit;
+	}
+	data->raw_pressure = be32_to_cpu((tmp));
+	data->raw_pressure >>= (8-data->oversampling_setting);
+	status = 0;	/* everything ok, return 0 */
+
+exit:
+	mutex_unlock(&data->lock);
+	return status;
+}
+
+
+/*
+ * This function starts the temperature measurement and returns the value
+ * in tenth of a degree celsius.
+ */
+static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
+{
+	struct bmp085_calibration_data *cali = &data->calibration;
+	long x1, x2;
+	int status;
+
+	status = bmp085_update_raw_temperature(data);
+	if (status != 0)
+		goto exit;
+
+	x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
+	x2 = (cali->MC << 11) / (x1 + cali->MD);
+	data->b6 = x1 + x2 - 4000;
+	/* if NULL just update b6. Used for pressure only measurements */
+	if (temperature != NULL)
+		*temperature = (x1+x2+8) >> 4;
+
+exit:
+	return status;;
+}
+
+/*
+ * This function starts the pressure measurement and returns the value
+ * in millibar. Since the pressure depends on the ambient temperature,
+ * a temperature measurement is executed if the last known value is older
+ * than one second.
+ */
+static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
+{
+	struct bmp085_calibration_data *cali = &data->calibration;
+	s32 x1, x2, x3, b3;
+	u32 b4, b7;
+	s32 p;
+	int status;
+
+	/* alt least every second force an update of the ambient temperature */
+	if (data->last_temp_measurement + 1*HZ < jiffies) {
+		status = bmp085_get_temperature(data, NULL);
+		if (status != 0)
+			goto exit;
+	}
+
+	status = bmp085_update_raw_pressure(data);
+	if (status != 0)
+		goto exit;
+
+	x1 = (data->b6 * data->b6) >> 12;
+	x1 *= cali->B2;
+	x1 >>= 11;
+
+	x2 = cali->AC2 * data->b6;
+	x2 >>= 11;
+
+	x3 = x1 + x2;
+
+	b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
+	b3 >>= 2;
+
+	x1 = (cali->AC3 * data->b6) >> 13;
+	x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
+	x3 = (x1 + x2 + 2) >> 2;
+	b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
+
+	b7 = ((u32)data->raw_pressure - b3) *
+					(50000 >> data->oversampling_setting);
+	p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
+
+	x1 = p >> 8;
+	x1 *= x1;
+	x1 = (x1 * 3038) >> 16;
+	x2 = (-7357 * p) >> 16;
+	p += (x1 + x2 + 3791) >> 4;
+
+	*pressure = p;
+
+exit:
+	return status;
+}
+
+/*
+ * This function sets the chip-internal oversampling. Valid values are 0..3.
+ * The chip will use 2^oversampling samples for internal averaging.
+ * This influences the measurement time and the accuracy; larger values
+ * increase both. The datasheet gives on overview on how measurement time,
+ * accuracy and noise correlate.
+ */
+static void bmp085_set_oversampling(struct bmp085_data *data,
+						unsigned char oversampling)
+{
+	if (oversampling > 3)
+		oversampling = 3;
+	data->oversampling_setting = oversampling;
+}
+
+/*
+ * Returns the currently selected oversampling. Range: 0..3
+ */
+static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
+{
+	return data->oversampling_setting;
+}
+
+/* sysfs callbacks */
+static ssize_t set_oversampling(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bmp085_data *data = i2c_get_clientdata(client);
+	unsigned long oversampling;
+	int success = strict_strtoul(buf, 10, &oversampling);
+	if (success == 0) {
+		bmp085_set_oversampling(data, oversampling);
+		return count;
+	}
+	return success;
+}
+
+static ssize_t show_oversampling(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bmp085_data *data = i2c_get_clientdata(client);
+	return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
+}
+static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
+					show_oversampling, set_oversampling);
+
+
+static ssize_t show_temperature(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int temperature;
+	int status;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bmp085_data *data = i2c_get_clientdata(client);
+
+	status = bmp085_get_temperature(data, &temperature);
+	if (status != 0)
+		return status;
+	else
+		return sprintf(buf, "%d\n", temperature);
+}
+static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
+
+
+static ssize_t show_pressure(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	int pressure;
+	int status;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bmp085_data *data = i2c_get_clientdata(client);
+
+	status = bmp085_get_pressure(data, &pressure);
+	if (status != 0)
+		return status;
+	else
+		return sprintf(buf, "%d\n", pressure);
+}
+static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
+
+
+static struct attribute *bmp085_attributes[] = {
+	&dev_attr_temp0_input.attr,
+	&dev_attr_pressure0_input.attr,
+	&dev_attr_oversampling.attr,
+	NULL
+};
+
+static const struct attribute_group bmp085_attr_group = {
+	.attrs = bmp085_attributes,
+};
+
+static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+	if (client->addr != BMP085_I2C_ADDRESS)
+		return -ENODEV;
+
+	if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int bmp085_init_client(struct i2c_client *client)
+{
+	unsigned char version;
+	int status;
+	struct bmp085_data *data = i2c_get_clientdata(client);
+	data->client = client;
+	status = bmp085_read_calibration_data(client);
+	if (status != 0)
+		goto exit;
+	version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG);
+	data->last_temp_measurement = 0;
+	data->oversampling_setting = 3;
+	mutex_init(&data->lock);
+	dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n",
+			(version & 0x0F), (version & 0xF0) >> 4);
+exit:
+	return status;
+}
+
+static int bmp085_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct bmp085_data *data;
+	int err = 0;
+
+	data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	/* default settings after POR */
+	data->oversampling_setting = 0x00;
+
+	i2c_set_clientdata(client, data);
+
+	/* Initialize the BMP085 chip */
+	err = bmp085_init_client(client);
+	if (err != 0)
+		goto exit_free;
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+	if (err)
+		goto exit_free;
+
+	dev_info(&data->client->dev, "Succesfully initialized bmp085!\n");
+	goto exit;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int bmp085_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static const struct i2c_device_id bmp085_id[] = {
+	{ "bmp085", 0 },
+	{ }
+};
+
+static struct i2c_driver bmp085_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name	= "bmp085"
+	},
+	.id_table	= bmp085_id,
+	.probe		= bmp085_probe,
+	.remove		= bmp085_remove,
+
+	.detect		= bmp085_detect,
+	.address_list	= normal_i2c
+};
+
+static int __init bmp085_init(void)
+{
+	return i2c_add_driver(&bmp085_driver);
+}
+
+static void __exit bmp085_exit(void)
+{
+	i2c_del_driver(&bmp085_driver);
+}
+
+
+MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com");
+MODULE_DESCRIPTION("BMP085 driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp085_init);
+module_exit(bmp085_exit);
diff --git a/drivers/misc/hmc6352.c b/drivers/misc/hmc6352.c
new file mode 100644
index 00000000000..234bfcaf209
--- /dev/null
+++ b/drivers/misc/hmc6352.c
@@ -0,0 +1,166 @@
+/*
+ * hmc6352.c - Honeywell Compass Driver
+ *
+ * Copyright (C) 2009 Intel Corp
+ *
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+
+static DEFINE_MUTEX(compass_mutex);
+
+static int compass_command(struct i2c_client *c, u8 cmd)
+{
+	int ret = i2c_master_send(c, &cmd, 1);
+	if (ret < 0)
+		dev_warn(&c->dev, "command '%c' failed.\n", cmd);
+	return ret;
+}
+
+static int compass_store(struct device *dev, const char *buf, size_t count,
+			const char *map)
+{
+	struct i2c_client *c = to_i2c_client(dev);
+	int ret;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+	if (val >= strlen(map))
+		return -EINVAL;
+	mutex_lock(&compass_mutex);
+	ret = compass_command(c, map[val]);
+	mutex_unlock(&compass_mutex);
+	if (ret < 0)
+		return ret;
+	return count;
+}
+
+static ssize_t compass_calibration_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return compass_store(dev, buf, count, "EC");
+}
+
+static ssize_t compass_power_mode_store(struct device *dev,
+		struct device_attribute *attr, const  char *buf, size_t count)
+{
+	return compass_store(dev, buf, count, "SW");
+}
+
+static ssize_t compass_heading_data_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char i2c_data[2];
+	unsigned int ret;
+
+	mutex_lock(&compass_mutex);
+	ret = compass_command(client, 'A');
+	if (ret != 1) {
+		mutex_unlock(&compass_mutex);
+		return ret;
+	}
+	msleep(10); /* sending 'A' cmd we need to wait for 7-10 millisecs */
+	ret = i2c_master_recv(client, i2c_data, 2);
+	mutex_unlock(&compass_mutex);
+	if (ret != 1) {
+		dev_warn(dev, "i2c read data cmd failed\n");
+		return ret;
+	}
+	ret = (i2c_data[0] << 8) | i2c_data[1];
+	return sprintf(buf, "%d.%d\n", ret/10, ret%10);
+}
+
+
+static DEVICE_ATTR(heading0_input, S_IRUGO, compass_heading_data_show, NULL);
+static DEVICE_ATTR(calibration, S_IWUSR, NULL, compass_calibration_store);
+static DEVICE_ATTR(power_state, S_IWUSR, NULL, compass_power_mode_store);
+
+static struct attribute *mid_att_compass[] = {
+	&dev_attr_heading0_input.attr,
+	&dev_attr_calibration.attr,
+	&dev_attr_power_state.attr,
+	NULL
+};
+
+static const struct attribute_group m_compass_gr = {
+	.name = "hmc6352",
+	.attrs = mid_att_compass
+};
+
+static int hmc6352_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	int res;
+
+	res = sysfs_create_group(&client->dev.kobj, &m_compass_gr);
+	if (res) {
+		dev_err(&client->dev, "device_create_file failed\n");
+		return res;
+	}
+	dev_info(&client->dev, "%s HMC6352 compass chip found\n",
+							client->name);
+	return 0;
+}
+
+static int hmc6352_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &m_compass_gr);
+	return 0;
+}
+
+static struct i2c_device_id hmc6352_id[] = {
+	{ "hmc6352", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, hmc6352_id);
+
+static struct i2c_driver hmc6352_driver = {
+	.driver = {
+		.name = "hmc6352",
+	},
+	.probe = hmc6352_probe,
+	.remove = hmc6352_remove,
+	.id_table = hmc6352_id,
+};
+
+static int __init sensor_hmc6352_init(void)
+{
+	return i2c_add_driver(&hmc6352_driver);
+}
+
+static void  __exit sensor_hmc6352_exit(void)
+{
+	i2c_del_driver(&hmc6352_driver);
+}
+
+module_init(sensor_hmc6352_init);
+module_exit(sensor_hmc6352_exit);
+
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_DESCRIPTION("hmc6352 Compass Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 98ad0120aa9..557a8c2a733 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
 
 static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 {
-	char *dma_va, *dma_pa;
+	char *dma_va;
+	dma_addr_t dma_pa;
 	struct ccb *driver_ccb, *ilo_ccb;
 
 	driver_ccb = &data->driver_ccb;
@@ -272,12 +273,12 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 		return -ENOMEM;
 
 	dma_va = (char *)data->dma_va;
-	dma_pa = (char *)data->dma_pa;
+	dma_pa = data->dma_pa;
 
 	memset(dma_va, 0, data->dma_size);
 
 	dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN);
-	dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_START_ALIGN);
+	dma_pa = roundup(dma_pa, ILO_START_ALIGN);
 
 	/*
 	 * Create two ccb's, one with virt addrs, one with phys addrs.
@@ -288,26 +289,26 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
 
 	fifo_setup(dma_va, NR_QENTRY);
 	driver_ccb->ccb_u1.send_fifobar = dma_va + FIFOHANDLESIZE;
-	ilo_ccb->ccb_u1.send_fifobar = dma_pa + FIFOHANDLESIZE;
+	ilo_ccb->ccb_u1.send_fifobar_pa = dma_pa + FIFOHANDLESIZE;
 	dma_va += fifo_sz(NR_QENTRY);
 	dma_pa += fifo_sz(NR_QENTRY);
 
 	dma_va = (char *)roundup((unsigned long)dma_va, ILO_CACHE_SZ);
-	dma_pa = (char *)roundup((unsigned long)dma_pa, ILO_CACHE_SZ);
+	dma_pa = roundup(dma_pa, ILO_CACHE_SZ);
 
 	fifo_setup(dma_va, NR_QENTRY);
 	driver_ccb->ccb_u3.recv_fifobar = dma_va + FIFOHANDLESIZE;
-	ilo_ccb->ccb_u3.recv_fifobar = dma_pa + FIFOHANDLESIZE;
+	ilo_ccb->ccb_u3.recv_fifobar_pa = dma_pa + FIFOHANDLESIZE;
 	dma_va += fifo_sz(NR_QENTRY);
 	dma_pa += fifo_sz(NR_QENTRY);
 
 	driver_ccb->ccb_u2.send_desc = dma_va;
-	ilo_ccb->ccb_u2.send_desc = dma_pa;
+	ilo_ccb->ccb_u2.send_desc_pa = dma_pa;
 	dma_pa += desc_mem_sz(NR_QENTRY);
 	dma_va += desc_mem_sz(NR_QENTRY);
 
 	driver_ccb->ccb_u4.recv_desc = dma_va;
-	ilo_ccb->ccb_u4.recv_desc = dma_pa;
+	ilo_ccb->ccb_u4.recv_desc_pa = dma_pa;
 
 	driver_ccb->channel = slot;
 	ilo_ccb->channel = slot;
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index 247eb386a97..54e43adbdea 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -79,21 +79,21 @@ struct ilo_hwinfo {
 struct ccb {
 	union {
 		char *send_fifobar;
-		u64 padding1;
+		u64 send_fifobar_pa;
 	} ccb_u1;
 	union {
 		char *send_desc;
-		u64 padding2;
+		u64 send_desc_pa;
 	} ccb_u2;
 	u64 send_ctrl;
 
 	union {
 		char *recv_fifobar;
-		u64 padding3;
+		u64 recv_fifobar_pa;
 	} ccb_u3;
 	union {
 		char *recv_desc;
-		u64 padding4;
+		u64 recv_desc_pa;
 	} ccb_u4;
 	u64 recv_ctrl;
 
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index f06d06e7fdf..d25e22cee4c 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -432,3 +432,12 @@ config MMC_SH_MMCIF
 	  This selects the MMC Host Interface controler (MMCIF).
 
 	  This driver supports MMCIF in sh7724/sh7757/sh7372.
+
+config MMC_JZ4740
+	tristate "JZ4740 SD/Multimedia Card Interface support"
+	depends on MACH_JZ4740
+	help
+	  This selects support for the SD/MMC controller on Ingenic JZ4740
+	  SoCs.
+	  If you have a board based on such a SoC and with a SD/MMC slot,
+	  say Y or M here.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index e30c2ee4889..f4e53c98d94 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_MMC_CB710)	+= cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)	+= via-sdmmc.o
 obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
+obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
 sdhci-of-y				:= sdhci-of-core.o
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
new file mode 100644
index 00000000000..ad4f9870e3c
--- /dev/null
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -0,0 +1,1029 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SD/MMC controller driver
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/scatterlist.h>
+#include <linux/clk.h>
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <asm/mach-jz4740/gpio.h>
+#include <asm/cacheflush.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-jz4740/jz4740_mmc.h>
+
+#define JZ_REG_MMC_STRPCL	0x00
+#define JZ_REG_MMC_STATUS	0x04
+#define JZ_REG_MMC_CLKRT	0x08
+#define JZ_REG_MMC_CMDAT	0x0C
+#define JZ_REG_MMC_RESTO	0x10
+#define JZ_REG_MMC_RDTO		0x14
+#define JZ_REG_MMC_BLKLEN	0x18
+#define JZ_REG_MMC_NOB		0x1C
+#define JZ_REG_MMC_SNOB		0x20
+#define JZ_REG_MMC_IMASK	0x24
+#define JZ_REG_MMC_IREG		0x28
+#define JZ_REG_MMC_CMD		0x2C
+#define JZ_REG_MMC_ARG		0x30
+#define JZ_REG_MMC_RESP_FIFO	0x34
+#define JZ_REG_MMC_RXFIFO	0x38
+#define JZ_REG_MMC_TXFIFO	0x3C
+
+#define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7)
+#define JZ_MMC_STRPCL_EXIT_TRANSFER BIT(6)
+#define JZ_MMC_STRPCL_START_READWAIT BIT(5)
+#define JZ_MMC_STRPCL_STOP_READWAIT BIT(4)
+#define JZ_MMC_STRPCL_RESET BIT(3)
+#define JZ_MMC_STRPCL_START_OP BIT(2)
+#define JZ_MMC_STRPCL_CLOCK_CONTROL (BIT(1) | BIT(0))
+#define JZ_MMC_STRPCL_CLOCK_STOP BIT(0)
+#define JZ_MMC_STRPCL_CLOCK_START BIT(1)
+
+
+#define JZ_MMC_STATUS_IS_RESETTING BIT(15)
+#define JZ_MMC_STATUS_SDIO_INT_ACTIVE BIT(14)
+#define JZ_MMC_STATUS_PRG_DONE BIT(13)
+#define JZ_MMC_STATUS_DATA_TRAN_DONE BIT(12)
+#define JZ_MMC_STATUS_END_CMD_RES BIT(11)
+#define JZ_MMC_STATUS_DATA_FIFO_AFULL BIT(10)
+#define JZ_MMC_STATUS_IS_READWAIT BIT(9)
+#define JZ_MMC_STATUS_CLK_EN BIT(8)
+#define JZ_MMC_STATUS_DATA_FIFO_FULL BIT(7)
+#define JZ_MMC_STATUS_DATA_FIFO_EMPTY BIT(6)
+#define JZ_MMC_STATUS_CRC_RES_ERR BIT(5)
+#define JZ_MMC_STATUS_CRC_READ_ERROR BIT(4)
+#define JZ_MMC_STATUS_TIMEOUT_WRITE BIT(3)
+#define JZ_MMC_STATUS_CRC_WRITE_ERROR BIT(2)
+#define JZ_MMC_STATUS_TIMEOUT_RES BIT(1)
+#define JZ_MMC_STATUS_TIMEOUT_READ BIT(0)
+
+#define JZ_MMC_STATUS_READ_ERROR_MASK (BIT(4) | BIT(0))
+#define JZ_MMC_STATUS_WRITE_ERROR_MASK (BIT(3) | BIT(2))
+
+
+#define JZ_MMC_CMDAT_IO_ABORT BIT(11)
+#define JZ_MMC_CMDAT_BUS_WIDTH_4BIT BIT(10)
+#define JZ_MMC_CMDAT_DMA_EN BIT(8)
+#define JZ_MMC_CMDAT_INIT BIT(7)
+#define JZ_MMC_CMDAT_BUSY BIT(6)
+#define JZ_MMC_CMDAT_STREAM BIT(5)
+#define JZ_MMC_CMDAT_WRITE BIT(4)
+#define JZ_MMC_CMDAT_DATA_EN BIT(3)
+#define JZ_MMC_CMDAT_RESPONSE_FORMAT (BIT(2) | BIT(1) | BIT(0))
+#define JZ_MMC_CMDAT_RSP_R1 1
+#define JZ_MMC_CMDAT_RSP_R2 2
+#define JZ_MMC_CMDAT_RSP_R3 3
+
+#define JZ_MMC_IRQ_SDIO BIT(7)
+#define JZ_MMC_IRQ_TXFIFO_WR_REQ BIT(6)
+#define JZ_MMC_IRQ_RXFIFO_RD_REQ BIT(5)
+#define JZ_MMC_IRQ_END_CMD_RES BIT(2)
+#define JZ_MMC_IRQ_PRG_DONE BIT(1)
+#define JZ_MMC_IRQ_DATA_TRAN_DONE BIT(0)
+
+
+#define JZ_MMC_CLK_RATE 24000000
+
+enum jz4740_mmc_state {
+	JZ4740_MMC_STATE_READ_RESPONSE,
+	JZ4740_MMC_STATE_TRANSFER_DATA,
+	JZ4740_MMC_STATE_SEND_STOP,
+	JZ4740_MMC_STATE_DONE,
+};
+
+struct jz4740_mmc_host {
+	struct mmc_host *mmc;
+	struct platform_device *pdev;
+	struct jz4740_mmc_platform_data *pdata;
+	struct clk *clk;
+
+	int irq;
+	int card_detect_irq;
+
+	struct resource *mem;
+	void __iomem *base;
+	struct mmc_request *req;
+	struct mmc_command *cmd;
+
+	unsigned long waiting;
+
+	uint32_t cmdat;
+
+	uint16_t irq_mask;
+
+	spinlock_t lock;
+
+	struct timer_list timeout_timer;
+	struct sg_mapping_iter miter;
+	enum jz4740_mmc_state state;
+};
+
+static void jz4740_mmc_set_irq_enabled(struct jz4740_mmc_host *host,
+	unsigned int irq, bool enabled)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+	if (enabled)
+		host->irq_mask &= ~irq;
+	else
+		host->irq_mask |= irq;
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	writew(host->irq_mask, host->base + JZ_REG_MMC_IMASK);
+}
+
+static void jz4740_mmc_clock_enable(struct jz4740_mmc_host *host,
+	bool start_transfer)
+{
+	uint16_t val = JZ_MMC_STRPCL_CLOCK_START;
+
+	if (start_transfer)
+		val |= JZ_MMC_STRPCL_START_OP;
+
+	writew(val, host->base + JZ_REG_MMC_STRPCL);
+}
+
+static void jz4740_mmc_clock_disable(struct jz4740_mmc_host *host)
+{
+	uint32_t status;
+	unsigned int timeout = 1000;
+
+	writew(JZ_MMC_STRPCL_CLOCK_STOP, host->base + JZ_REG_MMC_STRPCL);
+	do {
+		status = readl(host->base + JZ_REG_MMC_STATUS);
+	} while (status & JZ_MMC_STATUS_CLK_EN && --timeout);
+}
+
+static void jz4740_mmc_reset(struct jz4740_mmc_host *host)
+{
+	uint32_t status;
+	unsigned int timeout = 1000;
+
+	writew(JZ_MMC_STRPCL_RESET, host->base + JZ_REG_MMC_STRPCL);
+	udelay(10);
+	do {
+		status = readl(host->base + JZ_REG_MMC_STATUS);
+	} while (status & JZ_MMC_STATUS_IS_RESETTING && --timeout);
+}
+
+static void jz4740_mmc_request_done(struct jz4740_mmc_host *host)
+{
+	struct mmc_request *req;
+
+	req = host->req;
+	host->req = NULL;
+
+	mmc_request_done(host->mmc, req);
+}
+
+static unsigned int jz4740_mmc_poll_irq(struct jz4740_mmc_host *host,
+	unsigned int irq)
+{
+	unsigned int timeout = 0x800;
+	uint16_t status;
+
+	do {
+		status = readw(host->base + JZ_REG_MMC_IREG);
+	} while (!(status & irq) && --timeout);
+
+	if (timeout == 0) {
+		set_bit(0, &host->waiting);
+		mod_timer(&host->timeout_timer, jiffies + 5*HZ);
+		jz4740_mmc_set_irq_enabled(host, irq, true);
+		return true;
+	}
+
+	return false;
+}
+
+static void jz4740_mmc_transfer_check_state(struct jz4740_mmc_host *host,
+	struct mmc_data *data)
+{
+	int status;
+
+	status = readl(host->base + JZ_REG_MMC_STATUS);
+	if (status & JZ_MMC_STATUS_WRITE_ERROR_MASK) {
+		if (status & (JZ_MMC_STATUS_TIMEOUT_WRITE)) {
+			host->req->cmd->error = -ETIMEDOUT;
+			data->error = -ETIMEDOUT;
+		} else {
+			host->req->cmd->error = -EIO;
+			data->error = -EIO;
+		}
+	}
+}
+
+static bool jz4740_mmc_write_data(struct jz4740_mmc_host *host,
+	struct mmc_data *data)
+{
+	struct sg_mapping_iter *miter = &host->miter;
+	void __iomem *fifo_addr = host->base + JZ_REG_MMC_TXFIFO;
+	uint32_t *buf;
+	bool timeout;
+	size_t i, j;
+
+	while (sg_miter_next(miter)) {
+		buf = miter->addr;
+		i = miter->length / 4;
+		j = i / 8;
+		i = i & 0x7;
+		while (j) {
+			timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_TXFIFO_WR_REQ);
+			if (unlikely(timeout))
+				goto poll_timeout;
+
+			writel(buf[0], fifo_addr);
+			writel(buf[1], fifo_addr);
+			writel(buf[2], fifo_addr);
+			writel(buf[3], fifo_addr);
+			writel(buf[4], fifo_addr);
+			writel(buf[5], fifo_addr);
+			writel(buf[6], fifo_addr);
+			writel(buf[7], fifo_addr);
+			buf += 8;
+			--j;
+		}
+		if (unlikely(i)) {
+			timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_TXFIFO_WR_REQ);
+			if (unlikely(timeout))
+				goto poll_timeout;
+
+			while (i) {
+				writel(*buf, fifo_addr);
+				++buf;
+				--i;
+			}
+		}
+		data->bytes_xfered += miter->length;
+	}
+	sg_miter_stop(miter);
+
+	return false;
+
+poll_timeout:
+	miter->consumed = (void *)buf - miter->addr;
+	data->bytes_xfered += miter->consumed;
+	sg_miter_stop(miter);
+
+	return true;
+}
+
+static bool jz4740_mmc_read_data(struct jz4740_mmc_host *host,
+				struct mmc_data *data)
+{
+	struct sg_mapping_iter *miter = &host->miter;
+	void __iomem *fifo_addr = host->base + JZ_REG_MMC_RXFIFO;
+	uint32_t *buf;
+	uint32_t d;
+	uint16_t status;
+	size_t i, j;
+	unsigned int timeout;
+
+	while (sg_miter_next(miter)) {
+		buf = miter->addr;
+		i = miter->length;
+		j = i / 32;
+		i = i & 0x1f;
+		while (j) {
+			timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_RXFIFO_RD_REQ);
+			if (unlikely(timeout))
+				goto poll_timeout;
+
+			buf[0] = readl(fifo_addr);
+			buf[1] = readl(fifo_addr);
+			buf[2] = readl(fifo_addr);
+			buf[3] = readl(fifo_addr);
+			buf[4] = readl(fifo_addr);
+			buf[5] = readl(fifo_addr);
+			buf[6] = readl(fifo_addr);
+			buf[7] = readl(fifo_addr);
+
+			buf += 8;
+			--j;
+		}
+
+		if (unlikely(i)) {
+			timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_RXFIFO_RD_REQ);
+			if (unlikely(timeout))
+				goto poll_timeout;
+
+			while (i >= 4) {
+				*buf++ = readl(fifo_addr);
+				i -= 4;
+			}
+			if (unlikely(i > 0)) {
+				d = readl(fifo_addr);
+				memcpy(buf, &d, i);
+			}
+		}
+		data->bytes_xfered += miter->length;
+
+		/* This can go away once MIPS implements
+		 * flush_kernel_dcache_page */
+		flush_dcache_page(miter->page);
+	}
+	sg_miter_stop(miter);
+
+	/* For whatever reason there is sometime one word more in the fifo then
+	 * requested */
+	timeout = 1000;
+	status = readl(host->base + JZ_REG_MMC_STATUS);
+	while (!(status & JZ_MMC_STATUS_DATA_FIFO_EMPTY) && --timeout) {
+		d = readl(fifo_addr);
+		status = readl(host->base + JZ_REG_MMC_STATUS);
+	}
+
+	return false;
+
+poll_timeout:
+	miter->consumed = (void *)buf - miter->addr;
+	data->bytes_xfered += miter->consumed;
+	sg_miter_stop(miter);
+
+	return true;
+}
+
+static void jz4740_mmc_timeout(unsigned long data)
+{
+	struct jz4740_mmc_host *host = (struct jz4740_mmc_host *)data;
+
+	if (!test_and_clear_bit(0, &host->waiting))
+		return;
+
+	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_END_CMD_RES, false);
+
+	host->req->cmd->error = -ETIMEDOUT;
+	jz4740_mmc_request_done(host);
+}
+
+static void jz4740_mmc_read_response(struct jz4740_mmc_host *host,
+	struct mmc_command *cmd)
+{
+	int i;
+	uint16_t tmp;
+	void __iomem *fifo_addr = host->base + JZ_REG_MMC_RESP_FIFO;
+
+	if (cmd->flags & MMC_RSP_136) {
+		tmp = readw(fifo_addr);
+		for (i = 0; i < 4; ++i) {
+			cmd->resp[i] = tmp << 24;
+			tmp = readw(fifo_addr);
+			cmd->resp[i] |= tmp << 8;
+			tmp = readw(fifo_addr);
+			cmd->resp[i] |= tmp >> 8;
+		}
+	} else {
+		cmd->resp[0] = readw(fifo_addr) << 24;
+		cmd->resp[0] |= readw(fifo_addr) << 8;
+		cmd->resp[0] |= readw(fifo_addr) & 0xff;
+	}
+}
+
+static void jz4740_mmc_send_command(struct jz4740_mmc_host *host,
+	struct mmc_command *cmd)
+{
+	uint32_t cmdat = host->cmdat;
+
+	host->cmdat &= ~JZ_MMC_CMDAT_INIT;
+	jz4740_mmc_clock_disable(host);
+
+	host->cmd = cmd;
+
+	if (cmd->flags & MMC_RSP_BUSY)
+		cmdat |= JZ_MMC_CMDAT_BUSY;
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_R1B:
+	case MMC_RSP_R1:
+		cmdat |= JZ_MMC_CMDAT_RSP_R1;
+		break;
+	case MMC_RSP_R2:
+		cmdat |= JZ_MMC_CMDAT_RSP_R2;
+		break;
+	case MMC_RSP_R3:
+		cmdat |= JZ_MMC_CMDAT_RSP_R3;
+		break;
+	default:
+		break;
+	}
+
+	if (cmd->data) {
+		cmdat |= JZ_MMC_CMDAT_DATA_EN;
+		if (cmd->data->flags & MMC_DATA_WRITE)
+			cmdat |= JZ_MMC_CMDAT_WRITE;
+		if (cmd->data->flags & MMC_DATA_STREAM)
+			cmdat |= JZ_MMC_CMDAT_STREAM;
+
+		writew(cmd->data->blksz, host->base + JZ_REG_MMC_BLKLEN);
+		writew(cmd->data->blocks, host->base + JZ_REG_MMC_NOB);
+	}
+
+	writeb(cmd->opcode, host->base + JZ_REG_MMC_CMD);
+	writel(cmd->arg, host->base + JZ_REG_MMC_ARG);
+	writel(cmdat, host->base + JZ_REG_MMC_CMDAT);
+
+	jz4740_mmc_clock_enable(host, 1);
+}
+
+static void jz_mmc_prepare_data_transfer(struct jz4740_mmc_host *host)
+{
+	struct mmc_command *cmd = host->req->cmd;
+	struct mmc_data *data = cmd->data;
+	int direction;
+
+	if (data->flags & MMC_DATA_READ)
+		direction = SG_MITER_TO_SG;
+	else
+		direction = SG_MITER_FROM_SG;
+
+	sg_miter_start(&host->miter, data->sg, data->sg_len, direction);
+}
+
+
+static irqreturn_t jz_mmc_irq_worker(int irq, void *devid)
+{
+	struct jz4740_mmc_host *host = (struct jz4740_mmc_host *)devid;
+	struct mmc_command *cmd = host->req->cmd;
+	struct mmc_request *req = host->req;
+	bool timeout = false;
+
+	if (cmd->error)
+		host->state = JZ4740_MMC_STATE_DONE;
+
+	switch (host->state) {
+	case JZ4740_MMC_STATE_READ_RESPONSE:
+		if (cmd->flags & MMC_RSP_PRESENT)
+			jz4740_mmc_read_response(host, cmd);
+
+		if (!cmd->data)
+			break;
+
+		jz_mmc_prepare_data_transfer(host);
+
+	case JZ4740_MMC_STATE_TRANSFER_DATA:
+		if (cmd->data->flags & MMC_DATA_READ)
+			timeout = jz4740_mmc_read_data(host, cmd->data);
+		else
+			timeout = jz4740_mmc_write_data(host, cmd->data);
+
+		if (unlikely(timeout)) {
+			host->state = JZ4740_MMC_STATE_TRANSFER_DATA;
+			break;
+		}
+
+		jz4740_mmc_transfer_check_state(host, cmd->data);
+
+		timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_DATA_TRAN_DONE);
+		if (unlikely(timeout)) {
+			host->state = JZ4740_MMC_STATE_SEND_STOP;
+			break;
+		}
+		writew(JZ_MMC_IRQ_DATA_TRAN_DONE, host->base + JZ_REG_MMC_IREG);
+
+	case JZ4740_MMC_STATE_SEND_STOP:
+		if (!req->stop)
+			break;
+
+		jz4740_mmc_send_command(host, req->stop);
+
+		timeout = jz4740_mmc_poll_irq(host, JZ_MMC_IRQ_PRG_DONE);
+		if (timeout) {
+			host->state = JZ4740_MMC_STATE_DONE;
+			break;
+		}
+	case JZ4740_MMC_STATE_DONE:
+		break;
+	}
+
+	if (!timeout)
+		jz4740_mmc_request_done(host);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t jz_mmc_irq(int irq, void *devid)
+{
+	struct jz4740_mmc_host *host = devid;
+	struct mmc_command *cmd = host->cmd;
+	uint16_t irq_reg, status, tmp;
+
+	irq_reg = readw(host->base + JZ_REG_MMC_IREG);
+
+	tmp = irq_reg;
+	irq_reg &= ~host->irq_mask;
+
+	tmp &= ~(JZ_MMC_IRQ_TXFIFO_WR_REQ | JZ_MMC_IRQ_RXFIFO_RD_REQ |
+		JZ_MMC_IRQ_PRG_DONE | JZ_MMC_IRQ_DATA_TRAN_DONE);
+
+	if (tmp != irq_reg)
+		writew(tmp & ~irq_reg, host->base + JZ_REG_MMC_IREG);
+
+	if (irq_reg & JZ_MMC_IRQ_SDIO) {
+		writew(JZ_MMC_IRQ_SDIO, host->base + JZ_REG_MMC_IREG);
+		mmc_signal_sdio_irq(host->mmc);
+		irq_reg &= ~JZ_MMC_IRQ_SDIO;
+	}
+
+	if (host->req && cmd && irq_reg) {
+		if (test_and_clear_bit(0, &host->waiting)) {
+			del_timer(&host->timeout_timer);
+
+			status = readl(host->base + JZ_REG_MMC_STATUS);
+
+			if (status & JZ_MMC_STATUS_TIMEOUT_RES) {
+					cmd->error = -ETIMEDOUT;
+			} else if (status & JZ_MMC_STATUS_CRC_RES_ERR) {
+					cmd->error = -EIO;
+			} else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR |
+				    JZ_MMC_STATUS_CRC_WRITE_ERROR)) {
+					if (cmd->data)
+							cmd->data->error = -EIO;
+					cmd->error = -EIO;
+			} else if (status & (JZ_MMC_STATUS_CRC_READ_ERROR |
+					JZ_MMC_STATUS_CRC_WRITE_ERROR)) {
+					if (cmd->data)
+							cmd->data->error = -EIO;
+					cmd->error = -EIO;
+			}
+
+			jz4740_mmc_set_irq_enabled(host, irq_reg, false);
+			writew(irq_reg, host->base + JZ_REG_MMC_IREG);
+
+			return IRQ_WAKE_THREAD;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
+{
+	int div = 0;
+	int real_rate;
+
+	jz4740_mmc_clock_disable(host);
+	clk_set_rate(host->clk, JZ_MMC_CLK_RATE);
+
+	real_rate = clk_get_rate(host->clk);
+
+	while (real_rate > rate && div < 7) {
+		++div;
+		real_rate >>= 1;
+	}
+
+	writew(div, host->base + JZ_REG_MMC_CLKRT);
+	return real_rate;
+}
+
+static void jz4740_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+
+	host->req = req;
+
+	writew(0xffff, host->base + JZ_REG_MMC_IREG);
+
+	writew(JZ_MMC_IRQ_END_CMD_RES, host->base + JZ_REG_MMC_IREG);
+	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_END_CMD_RES, true);
+
+	host->state = JZ4740_MMC_STATE_READ_RESPONSE;
+	set_bit(0, &host->waiting);
+	mod_timer(&host->timeout_timer, jiffies + 5*HZ);
+	jz4740_mmc_send_command(host, req->cmd);
+}
+
+static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	if (ios->clock)
+		jz4740_mmc_set_clock_rate(host, ios->clock);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_UP:
+		jz4740_mmc_reset(host);
+		if (gpio_is_valid(host->pdata->gpio_power))
+			gpio_set_value(host->pdata->gpio_power,
+					!host->pdata->power_active_low);
+		host->cmdat |= JZ_MMC_CMDAT_INIT;
+		clk_enable(host->clk);
+		break;
+	case MMC_POWER_ON:
+		break;
+	default:
+		if (gpio_is_valid(host->pdata->gpio_power))
+			gpio_set_value(host->pdata->gpio_power,
+					host->pdata->power_active_low);
+		clk_disable(host->clk);
+		break;
+	}
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		host->cmdat &= ~JZ_MMC_CMDAT_BUS_WIDTH_4BIT;
+		break;
+	case MMC_BUS_WIDTH_4:
+		host->cmdat |= JZ_MMC_CMDAT_BUS_WIDTH_4BIT;
+		break;
+	default:
+		break;
+	}
+}
+
+static int jz4740_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	if (!gpio_is_valid(host->pdata->gpio_read_only))
+		return -ENOSYS;
+
+	return gpio_get_value(host->pdata->gpio_read_only) ^
+		host->pdata->read_only_active_low;
+}
+
+static int jz4740_mmc_get_cd(struct mmc_host *mmc)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	if (!gpio_is_valid(host->pdata->gpio_card_detect))
+		return -ENOSYS;
+
+	return gpio_get_value(host->pdata->gpio_card_detect) ^
+			host->pdata->card_detect_active_low;
+}
+
+static irqreturn_t jz4740_mmc_card_detect_irq(int irq, void *devid)
+{
+	struct jz4740_mmc_host *host = devid;
+
+	mmc_detect_change(host->mmc, HZ / 2);
+
+	return IRQ_HANDLED;
+}
+
+static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable);
+}
+
+static const struct mmc_host_ops jz4740_mmc_ops = {
+	.request	= jz4740_mmc_request,
+	.set_ios	= jz4740_mmc_set_ios,
+	.get_ro		= jz4740_mmc_get_ro,
+	.get_cd		= jz4740_mmc_get_cd,
+	.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
+};
+
+static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = {
+	JZ_GPIO_BULK_PIN(MSC_CMD),
+	JZ_GPIO_BULK_PIN(MSC_CLK),
+	JZ_GPIO_BULK_PIN(MSC_DATA0),
+	JZ_GPIO_BULK_PIN(MSC_DATA1),
+	JZ_GPIO_BULK_PIN(MSC_DATA2),
+	JZ_GPIO_BULK_PIN(MSC_DATA3),
+};
+
+static int __devinit jz4740_mmc_request_gpio(struct device *dev, int gpio,
+	const char *name, bool output, int value)
+{
+	int ret;
+
+	if (!gpio_is_valid(gpio))
+		return 0;
+
+	ret = gpio_request(gpio, name);
+	if (ret) {
+		dev_err(dev, "Failed to request %s gpio: %d\n", name, ret);
+		return ret;
+	}
+
+	if (output)
+		gpio_direction_output(gpio, value);
+	else
+		gpio_direction_input(gpio);
+
+	return 0;
+}
+
+static int __devinit jz4740_mmc_request_gpios(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return 0;
+
+	ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_card_detect,
+			"MMC detect change", false, 0);
+	if (ret)
+		goto err;
+
+	ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_read_only,
+			"MMC read only", false, 0);
+	if (ret)
+		goto err_free_gpio_card_detect;
+
+	ret = jz4740_mmc_request_gpio(&pdev->dev, pdata->gpio_power,
+			"MMC read only", true, pdata->power_active_low);
+	if (ret)
+		goto err_free_gpio_read_only;
+
+	return 0;
+
+err_free_gpio_read_only:
+	if (gpio_is_valid(pdata->gpio_read_only))
+		gpio_free(pdata->gpio_read_only);
+err_free_gpio_card_detect:
+	if (gpio_is_valid(pdata->gpio_card_detect))
+		gpio_free(pdata->gpio_card_detect);
+err:
+	return ret;
+}
+
+static int __devinit jz4740_mmc_request_cd_irq(struct platform_device *pdev,
+	struct jz4740_mmc_host *host)
+{
+	struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!gpio_is_valid(pdata->gpio_card_detect))
+		return 0;
+
+	host->card_detect_irq = gpio_to_irq(pdata->gpio_card_detect);
+	if (host->card_detect_irq < 0) {
+		dev_warn(&pdev->dev, "Failed to get card detect irq\n");
+		return 0;
+	}
+
+	return request_irq(host->card_detect_irq, jz4740_mmc_card_detect_irq,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			"MMC card detect", host);
+}
+
+static void jz4740_mmc_free_gpios(struct platform_device *pdev)
+{
+	struct jz4740_mmc_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return;
+
+	if (gpio_is_valid(pdata->gpio_power))
+		gpio_free(pdata->gpio_power);
+	if (gpio_is_valid(pdata->gpio_read_only))
+		gpio_free(pdata->gpio_read_only);
+	if (gpio_is_valid(pdata->gpio_card_detect))
+		gpio_free(pdata->gpio_card_detect);
+}
+
+static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host)
+{
+	size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins);
+	if (host->pdata && host->pdata->data_1bit)
+		num_pins -= 3;
+
+	return num_pins;
+}
+
+static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
+{
+	int ret;
+	struct mmc_host *mmc;
+	struct jz4740_mmc_host *host;
+	struct jz4740_mmc_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+
+	mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "Failed to alloc mmc host structure\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->pdata = pdata;
+
+	host->irq = platform_get_irq(pdev, 0);
+	if (host->irq < 0) {
+		ret = host->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+		goto err_free_host;
+	}
+
+	host->clk = clk_get(&pdev->dev, "mmc");
+	if (!host->clk) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get mmc clock\n");
+		goto err_free_host;
+	}
+
+	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!host->mem) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get base platform memory\n");
+		goto err_clk_put;
+	}
+
+	host->mem = request_mem_region(host->mem->start,
+					resource_size(host->mem), pdev->name);
+	if (!host->mem) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request base memory region\n");
+		goto err_clk_put;
+	}
+
+	host->base = ioremap_nocache(host->mem->start, resource_size(host->mem));
+	if (!host->base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to ioremap base memory\n");
+		goto err_release_mem_region;
+	}
+
+	ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret);
+		goto err_iounmap;
+	}
+
+	ret = jz4740_mmc_request_gpios(pdev);
+	if (ret)
+		goto err_gpio_bulk_free;
+
+	mmc->ops = &jz4740_mmc_ops;
+	mmc->f_min = JZ_MMC_CLK_RATE / 128;
+	mmc->f_max = JZ_MMC_CLK_RATE;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = (pdata && pdata->data_1bit) ? 0 : MMC_CAP_4_BIT_DATA;
+	mmc->caps |= MMC_CAP_SDIO_IRQ;
+
+	mmc->max_blk_size = (1 << 10) - 1;
+	mmc->max_blk_count = (1 << 15) - 1;
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+
+	mmc->max_phys_segs = 128;
+	mmc->max_hw_segs = 128;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	host->mmc = mmc;
+	host->pdev = pdev;
+	spin_lock_init(&host->lock);
+	host->irq_mask = 0xffff;
+
+	ret = jz4740_mmc_request_cd_irq(pdev, host);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request card detect irq\n");
+		goto err_free_gpios;
+	}
+
+	ret = request_threaded_irq(host->irq, jz_mmc_irq, jz_mmc_irq_worker, 0,
+			dev_name(&pdev->dev), host);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
+		goto err_free_card_detect_irq;
+	}
+
+	jz4740_mmc_reset(host);
+	jz4740_mmc_clock_disable(host);
+	setup_timer(&host->timeout_timer, jz4740_mmc_timeout,
+			(unsigned long)host);
+	/* It is not important when it times out, it just needs to timeout. */
+	set_timer_slack(&host->timeout_timer, HZ);
+
+	platform_set_drvdata(pdev, host);
+	ret = mmc_add_host(mmc);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add mmc host: %d\n", ret);
+		goto err_free_irq;
+	}
+	dev_info(&pdev->dev, "JZ SD/MMC card driver registered\n");
+
+	return 0;
+
+err_free_irq:
+	free_irq(host->irq, host);
+err_free_card_detect_irq:
+	if (host->card_detect_irq >= 0)
+		free_irq(host->card_detect_irq, host);
+err_free_gpios:
+	jz4740_mmc_free_gpios(pdev);
+err_gpio_bulk_free:
+	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
+err_iounmap:
+	iounmap(host->base);
+err_release_mem_region:
+	release_mem_region(host->mem->start, resource_size(host->mem));
+err_clk_put:
+	clk_put(host->clk);
+err_free_host:
+	platform_set_drvdata(pdev, NULL);
+	mmc_free_host(mmc);
+
+	return ret;
+}
+
+static int __devexit jz4740_mmc_remove(struct platform_device *pdev)
+{
+	struct jz4740_mmc_host *host = platform_get_drvdata(pdev);
+
+	del_timer_sync(&host->timeout_timer);
+	jz4740_mmc_set_irq_enabled(host, 0xff, false);
+	jz4740_mmc_reset(host);
+
+	mmc_remove_host(host->mmc);
+
+	free_irq(host->irq, host);
+	if (host->card_detect_irq >= 0)
+		free_irq(host->card_detect_irq, host);
+
+	jz4740_mmc_free_gpios(pdev);
+	jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
+
+	iounmap(host->base);
+	release_mem_region(host->mem->start, resource_size(host->mem));
+
+	clk_put(host->clk);
+
+	platform_set_drvdata(pdev, NULL);
+	mmc_free_host(host->mmc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int jz4740_mmc_suspend(struct device *dev)
+{
+	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
+
+	mmc_suspend_host(host->mmc);
+
+	jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
+
+	return 0;
+}
+
+static int jz4740_mmc_resume(struct device *dev)
+{
+	struct jz4740_mmc_host *host = dev_get_drvdata(dev);
+
+	jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
+
+	mmc_resume_host(host->mmc);
+
+	return 0;
+}
+
+const struct dev_pm_ops jz4740_mmc_pm_ops = {
+	.suspend	= jz4740_mmc_suspend,
+	.resume		= jz4740_mmc_resume,
+	.poweroff	= jz4740_mmc_suspend,
+	.restore	= jz4740_mmc_resume,
+};
+
+#define JZ4740_MMC_PM_OPS (&jz4740_mmc_pm_ops)
+#else
+#define JZ4740_MMC_PM_OPS NULL
+#endif
+
+static struct platform_driver jz4740_mmc_driver = {
+	.probe = jz4740_mmc_probe,
+	.remove = __devexit_p(jz4740_mmc_remove),
+	.driver = {
+		.name = "jz4740-mmc",
+		.owner = THIS_MODULE,
+		.pm = JZ4740_MMC_PM_OPS,
+	},
+};
+
+static int __init jz4740_mmc_init(void)
+{
+	return platform_driver_register(&jz4740_mmc_driver);
+}
+module_init(jz4740_mmc_init);
+
+static void __exit jz4740_mmc_exit(void)
+{
+	platform_driver_unregister(&jz4740_mmc_driver);
+}
+module_exit(jz4740_mmc_exit);
+
+MODULE_DESCRIPTION("JZ4740 SD/MMC controller driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index ad847a24a67..7b0f3ef50f9 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1533,12 +1533,20 @@ static int __devexit mmc_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
+	{ .compatible = "mmc-spi-slot", },
+};
+#endif
 
 static struct spi_driver mmc_spi_driver = {
 	.driver = {
 		.name =		"mmc_spi",
 		.bus =		&spi_bus_type,
 		.owner =	THIS_MODULE,
+#if defined(CONFIG_OF)
+		.of_match_table = mmc_spi_of_match_table,
+#endif
 	},
 	.probe =	mmc_spi_probe,
 	.remove =	__devexit_p(mmc_spi_remove),
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index e7507af3856..7aa65bb2af4 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -30,7 +30,6 @@
 #include <linux/ioport.h>
 #include <linux/scatterlist.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index f22bc9f05dd..6629d09f3b3 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -321,7 +321,7 @@ config MTD_CFI_FLAGADM
 
 config MTD_REDWOOD
 	tristate "CFI Flash devices mapped on IBM Redwood"
-	depends on MTD_CFI && ( REDWOOD_4 || REDWOOD_5 || REDWOOD_6 )
+	depends on MTD_CFI
 	help
 	  This enables access routines for the flash chips on the IBM
 	  Redwood board. If you have one of these boards and would like to
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index e699e6ac23d..e9ca5ba7d9d 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -16,7 +16,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -103,7 +102,7 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
 {
 	struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1;
 	window_handle_t win = (window_handle_t)map->map_priv_2;
-	memreq_t mrq;
+	unsigned int offset;
 	int ret;
 
 	if (!pcmcia_dev_present(dev->p_dev)) {
@@ -111,15 +110,14 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
 		return 0;
 	}
 
-	mrq.CardOffset = to & ~(dev->win_size-1);
-	if(mrq.CardOffset != dev->offset) {
+	offset = to & ~(dev->win_size-1);
+	if (offset != dev->offset) {
 		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
-		      dev->offset, mrq.CardOffset);
-		mrq.Page = 0;
-		ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq);
+		      dev->offset, offset);
+		ret = pcmcia_map_mem_page(dev->p_dev, win, offset);
 		if (ret != 0)
 			return NULL;
-		dev->offset = mrq.CardOffset;
+		dev->offset = offset;
 	}
 	return dev->win_base + (to & (dev->win_size-1));
 }
@@ -346,7 +344,6 @@ static void pcmciamtd_release(struct pcmcia_device *link)
 			iounmap(dev->win_base);
 			dev->win_base = NULL;
 		}
-		pcmcia_release_window(link, link->win);
 	}
 	pcmcia_disable_device(link);
 }
diff --git a/drivers/mtd/maps/redwood.c b/drivers/mtd/maps/redwood.c
index 933c0b63b01..d2c9db00db0 100644
--- a/drivers/mtd/maps/redwood.c
+++ b/drivers/mtd/maps/redwood.c
@@ -22,8 +22,6 @@
 
 #include <asm/io.h>
 
-#if !defined (CONFIG_REDWOOD_6)
-
 #define WINDOW_ADDR 0xffc00000
 #define WINDOW_SIZE 0x00400000
 
@@ -69,47 +67,6 @@ static struct mtd_partition redwood_flash_partitions[] = {
 	}
 };
 
-#else /* CONFIG_REDWOOD_6 */
-/* FIXME: the window is bigger - armin */
-#define WINDOW_ADDR 0xff800000
-#define WINDOW_SIZE 0x00800000
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x400000	/* 4 MiB data */
-#define RW_PART1_OF	RW_PART0_OF + RW_PART0_SZ
-#define RW_PART1_SZ	0x10000		/* 64K VPD */
-#define RW_PART2_OF	RW_PART1_OF + RW_PART1_SZ
-#define RW_PART2_SZ	0x400000 - (0x10000 + 0x20000)
-#define RW_PART3_OF	RW_PART2_OF + RW_PART2_SZ
-#define RW_PART3_SZ	0x20000
-
-static struct mtd_partition redwood_flash_partitions[] = {
-	{
-		.name = "Redwood filesystem",
-		.offset = RW_PART0_OF,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS Vital Product Data",
-		.offset = RW_PART1_OF,
-		.size = RW_PART1_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name = "Redwood kernel",
-		.offset = RW_PART2_OF,
-		.size = RW_PART2_SZ
-	},
-	{
-		.name = "Redwood OpenBIOS",
-		.offset = RW_PART3_OF,
-		.size = RW_PART3_SZ,
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	}
-};
-
-#endif /* CONFIG_REDWOOD_6 */
-
 struct map_info redwood_flash_map = {
 	.name = "IBM Redwood",
 	.size = WINDOW_SIZE,
diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c
index 0391c2527bd..8984236a8d0 100644
--- a/drivers/mtd/maps/sun_uflash.c
+++ b/drivers/mtd/maps/sun_uflash.c
@@ -160,12 +160,12 @@ static struct of_platform_driver uflash_driver = {
 
 static int __init uflash_init(void)
 {
-	return of_register_driver(&uflash_driver, &of_bus_type);
+	return of_register_platform_driver(&uflash_driver);
 }
 
 static void __exit uflash_exit(void)
 {
-	of_unregister_driver(&uflash_driver);
+	of_unregister_platform_driver(&uflash_driver);
 }
 
 module_init(uflash_init);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index ffc3720929f..362d177efe1 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -526,4 +526,10 @@ config MTD_NAND_NUC900
 	  This enables the driver for the NAND Flash on evaluation board based
 	  on w90p910 / NUC9xx.
 
+config MTD_NAND_JZ4740
+	tristate "Support for JZ4740 SoC NAND controller"
+	depends on MACH_JZ4740
+	help
+		Enables support for NAND Flash on JZ4740 SoC based boards.
+
 endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index e8ab884ba47..ac83dcdac5d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -46,5 +46,6 @@ obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
+obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
 
 nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
new file mode 100644
index 00000000000..67343fc31bd
--- /dev/null
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -0,0 +1,516 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *  JZ4740 SoC NAND controller driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/jz4740_nand.h>
+
+#define JZ_REG_NAND_CTRL	0x50
+#define JZ_REG_NAND_ECC_CTRL	0x100
+#define JZ_REG_NAND_DATA	0x104
+#define JZ_REG_NAND_PAR0	0x108
+#define JZ_REG_NAND_PAR1	0x10C
+#define JZ_REG_NAND_PAR2	0x110
+#define JZ_REG_NAND_IRQ_STAT	0x114
+#define JZ_REG_NAND_IRQ_CTRL	0x118
+#define JZ_REG_NAND_ERR(x)	(0x11C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY	BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
+#define JZ_NAND_ECC_CTRL_RS		BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET		BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT	(BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH	BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH	BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH	BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR	BIT(1)
+#define JZ_NAND_STATUS_ERROR		BIT(0)
+
+#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
+
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+#define JZ_NAND_MEM_CMD_OFFSET 0x08000
+
+struct jz_nand {
+	struct mtd_info mtd;
+	struct nand_chip chip;
+	void __iomem *base;
+	struct resource *mem;
+
+	void __iomem *bank_base;
+	struct resource *bank_mem;
+
+	struct jz_nand_platform_data *pdata;
+	bool is_reading;
+};
+
+static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
+{
+	return container_of(mtd, struct jz_nand, mtd);
+}
+
+static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	struct nand_chip *chip = mtd->priv;
+	uint32_t reg;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
+		if (ctrl & NAND_ALE)
+			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
+		else if (ctrl & NAND_CLE)
+			chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
+		else
+			chip->IO_ADDR_W = nand->bank_base;
+
+		reg = readl(nand->base + JZ_REG_NAND_CTRL);
+		if (ctrl & NAND_NCE)
+			reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
+		else
+			reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
+		writel(reg, nand->base + JZ_REG_NAND_CTRL);
+	}
+	if (dat != NAND_CMD_NONE)
+		writeb(dat, chip->IO_ADDR_W);
+}
+
+static int jz_nand_dev_ready(struct mtd_info *mtd)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	return gpio_get_value_cansleep(nand->pdata->busy_gpio);
+}
+
+static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	uint32_t reg;
+
+	writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	reg |= JZ_NAND_ECC_CTRL_RESET;
+	reg |= JZ_NAND_ECC_CTRL_ENABLE;
+	reg |= JZ_NAND_ECC_CTRL_RS;
+
+	switch (mode) {
+	case NAND_ECC_READ:
+		reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+		nand->is_reading = true;
+		break;
+	case NAND_ECC_WRITE:
+		reg |= JZ_NAND_ECC_CTRL_ENCODING;
+		nand->is_reading = false;
+		break;
+	default:
+		break;
+	}
+
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat,
+	uint8_t *ecc_code)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	uint32_t reg, status;
+	int i;
+	unsigned int timeout = 1000;
+	static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
+						0x8b, 0xff, 0xb7, 0x6f};
+
+	if (nand->is_reading)
+		return 0;
+
+	do {
+		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+	if (timeout == 0)
+	    return -1;
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	for (i = 0; i < 9; ++i)
+		ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
+
+	/* If the written data is completly 0xff, we also want to write 0xff as
+	 * ecc, otherwise we will get in trouble when doing subpage writes. */
+	if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
+		memset(ecc_code, 0xff, 9);
+
+	return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
+{
+	int offset = index & 0x7;
+	uint16_t data;
+
+	index += (index >> 3);
+
+	data = dat[index];
+	data |= dat[index+1] << 8;
+
+	mask ^= (data >> offset) & 0x1ff;
+	data &= ~(0x1ff << offset);
+	data |= (mask << offset);
+
+	dat[index] = data & 0xff;
+	dat[index+1] = (data >> 8) & 0xff;
+}
+
+static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
+	uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+	struct jz_nand *nand = mtd_to_jz_nand(mtd);
+	int i, error_count, index;
+	uint32_t reg, status, error;
+	uint32_t t;
+	unsigned int timeout = 1000;
+
+	t = read_ecc[0];
+
+	if (t == 0xff) {
+		for (i = 1; i < 9; ++i)
+			t &= read_ecc[i];
+
+		t &= dat[0];
+		t &= dat[nand->chip.ecc.size / 2];
+		t &= dat[nand->chip.ecc.size - 1];
+
+		if (t == 0xff) {
+			for (i = 1; i < nand->chip.ecc.size - 1; ++i)
+				t &= dat[i];
+			if (t == 0xff)
+				return 0;
+		}
+	}
+
+	for (i = 0; i < 9; ++i)
+		writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	do {
+		status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+	} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+	if (timeout == 0)
+	    return -1;
+
+	reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+	reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+	writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+	if (status & JZ_NAND_STATUS_ERROR) {
+		if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+			return -1;
+
+		error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+		for (i = 0; i < error_count; ++i) {
+			error = readl(nand->base + JZ_REG_NAND_ERR(i));
+			index = ((error >> 16) & 0x1ff) - 1;
+			if (index >= 0 && index < 512)
+				jz_nand_correct_data(dat, index, error & 0x1ff);
+		}
+
+		return error_count;
+	}
+
+	return 0;
+}
+
+
+/* Copy paste of nand_read_page_hwecc_oob_first except for different eccpos
+ * handling. The ecc area is for 4k chips 72 bytes long and thus does not fit
+ * into the eccpos array. */
+static int jz_nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+	struct nand_chip *chip, uint8_t *buf, int page)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	unsigned int ecc_offset = chip->page_shift;
+
+	/* Read the OOB area first */
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+	for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		int stat;
+
+		chip->ecc.hwctl(mtd, NAND_ECC_READ);
+		chip->read_buf(mtd, p, eccsize);
+
+		stat = chip->ecc.correct(mtd, p, &chip->oob_poi[i], NULL);
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+	}
+	return 0;
+}
+
+/* Copy-and-paste of nand_write_page_hwecc with different eccpos handling. */
+static void jz_nand_write_page_hwecc(struct mtd_info *mtd,
+	struct nand_chip *chip, const uint8_t *buf)
+{
+	int i, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *p = buf;
+	unsigned int ecc_offset = chip->page_shift;
+
+	for (i = ecc_offset; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+		chip->write_buf(mtd, p, eccsize);
+		chip->ecc.calculate(mtd, p, &chip->oob_poi[i]);
+	}
+
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+}
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = {"cmdline", NULL};
+#endif
+
+static int jz_nand_ioremap_resource(struct platform_device *pdev,
+	const char *name, struct resource **res, void __iomem **base)
+{
+	int ret;
+
+	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+	if (!*res) {
+		dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
+		ret = -ENXIO;
+		goto err;
+	}
+
+	*res = request_mem_region((*res)->start, resource_size(*res),
+				pdev->name);
+	if (!*res) {
+		dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	*base = ioremap((*res)->start, resource_size(*res));
+	if (!*base) {
+		dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
+		ret = -EBUSY;
+		goto err_release_mem;
+	}
+
+	return 0;
+
+err_release_mem:
+	release_mem_region((*res)->start, resource_size(*res));
+err:
+	*res = NULL;
+	*base = NULL;
+	return ret;
+}
+
+static int __devinit jz_nand_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz_nand *nand;
+	struct nand_chip *chip;
+	struct mtd_info *mtd;
+	struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
+#ifdef CONFIG_MTD_PARTITIONS
+	struct mtd_partition *partition_info;
+	int num_partitions = 0;
+#endif
+
+	nand = kzalloc(sizeof(*nand), GFP_KERNEL);
+	if (!nand) {
+		dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+		return -ENOMEM;
+	}
+
+	ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
+	if (ret)
+		goto err_free;
+	ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
+			&nand->bank_base);
+	if (ret)
+		goto err_iounmap_mmio;
+
+	if (pdata && gpio_is_valid(pdata->busy_gpio)) {
+		ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to request busy gpio %d: %d\n",
+				pdata->busy_gpio, ret);
+			goto err_iounmap_mem;
+		}
+	}
+
+	mtd		= &nand->mtd;
+	chip		= &nand->chip;
+	mtd->priv	= chip;
+	mtd->owner	= THIS_MODULE;
+	mtd->name	= "jz4740-nand";
+
+	chip->ecc.hwctl		= jz_nand_hwctl;
+	chip->ecc.calculate	= jz_nand_calculate_ecc_rs;
+	chip->ecc.correct	= jz_nand_correct_ecc_rs;
+	chip->ecc.mode		= NAND_ECC_HW_OOB_FIRST;
+	chip->ecc.size		= 512;
+	chip->ecc.bytes		= 9;
+
+	chip->ecc.read_page	= jz_nand_read_page_hwecc_oob_first;
+	chip->ecc.write_page	= jz_nand_write_page_hwecc;
+
+	if (pdata)
+		chip->ecc.layout = pdata->ecc_layout;
+
+	chip->chip_delay = 50;
+	chip->cmd_ctrl = jz_nand_cmd_ctrl;
+
+	if (pdata && gpio_is_valid(pdata->busy_gpio))
+		chip->dev_ready = jz_nand_dev_ready;
+
+	chip->IO_ADDR_R = nand->bank_base;
+	chip->IO_ADDR_W = nand->bank_base;
+
+	nand->pdata = pdata;
+	platform_set_drvdata(pdev, nand);
+
+	writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
+
+	ret = nand_scan_ident(mtd, 1, NULL);
+	if (ret) {
+		dev_err(&pdev->dev,  "Failed to scan nand\n");
+		goto err_gpio_free;
+	}
+
+	if (pdata && pdata->ident_callback) {
+		pdata->ident_callback(pdev, chip, &pdata->partitions,
+					&pdata->num_partitions);
+	}
+
+	ret = nand_scan_tail(mtd);
+	if (ret) {
+		dev_err(&pdev->dev,  "Failed to scan nand\n");
+		goto err_gpio_free;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+	num_partitions = parse_mtd_partitions(mtd, part_probes,
+						&partition_info, 0);
+#endif
+	if (num_partitions <= 0 && pdata) {
+		num_partitions = pdata->num_partitions;
+		partition_info = pdata->partitions;
+	}
+
+	if (num_partitions > 0)
+		ret = add_mtd_partitions(mtd, partition_info, num_partitions);
+	else
+#endif
+	ret = add_mtd_device(mtd);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add mtd device\n");
+		goto err_nand_release;
+	}
+
+	dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
+
+	return 0;
+
+err_nand_release:
+	nand_release(&nand->mtd);
+err_gpio_free:
+	platform_set_drvdata(pdev, NULL);
+	gpio_free(pdata->busy_gpio);
+err_iounmap_mem:
+	iounmap(nand->bank_base);
+err_iounmap_mmio:
+	iounmap(nand->base);
+err_free:
+	kfree(nand);
+	return ret;
+}
+
+static int __devexit jz_nand_remove(struct platform_device *pdev)
+{
+	struct jz_nand *nand = platform_get_drvdata(pdev);
+
+	nand_release(&nand->mtd);
+
+	/* Deassert and disable all chips */
+	writel(0, nand->base + JZ_REG_NAND_CTRL);
+
+	iounmap(nand->bank_base);
+	release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
+	iounmap(nand->base);
+	release_mem_region(nand->mem->start, resource_size(nand->mem));
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(nand);
+
+	return 0;
+}
+
+struct platform_driver jz_nand_driver = {
+	.probe = jz_nand_probe,
+	.remove = __devexit_p(jz_nand_remove),
+	.driver = {
+		.name = "jz4740-nand",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz_nand_init(void)
+{
+	return platform_driver_register(&jz_nand_driver);
+}
+module_init(jz_nand_init);
+
+static void __exit jz_nand_exit(void)
+{
+	platform_driver_unregister(&jz_nand_driver);
+}
+module_exit(jz_nand_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
+MODULE_ALIAS("platform:jz4740-nand");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index ee87325c771..133d51528f8 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#define CONFIG_MTD_NAND_OMAP_HWECC
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -23,20 +24,8 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 
-#define GPMC_IRQ_STATUS		0x18
-#define GPMC_ECC_CONFIG		0x1F4
-#define GPMC_ECC_CONTROL	0x1F8
-#define GPMC_ECC_SIZE_CONFIG	0x1FC
-#define GPMC_ECC1_RESULT	0x200
-
 #define	DRIVER_NAME	"omap2-nand"
 
-#define	NAND_WP_OFF	0
-#define NAND_WP_BIT	0x00000010
-
-#define	GPMC_BUF_FULL	0x00000001
-#define	GPMC_BUF_EMPTY	0x00000000
-
 #define NAND_Ecc_P1e		(1 << 0)
 #define NAND_Ecc_P2e		(1 << 1)
 #define NAND_Ecc_P4e		(1 << 2)
@@ -139,34 +128,11 @@ struct omap_nand_info {
 
 	int				gpmc_cs;
 	unsigned long			phys_base;
-	void __iomem			*gpmc_cs_baseaddr;
-	void __iomem			*gpmc_baseaddr;
-	void __iomem			*nand_pref_fifo_add;
 	struct completion		comp;
 	int				dma_ch;
 };
 
 /**
- * omap_nand_wp - This function enable or disable the Write Protect feature
- * @mtd: MTD device structure
- * @mode: WP ON/OFF
- */
-static void omap_nand_wp(struct mtd_info *mtd, int mode)
-{
-	struct omap_nand_info *info = container_of(mtd,
-						struct omap_nand_info, mtd);
-
-	unsigned long config = __raw_readl(info->gpmc_baseaddr + GPMC_CONFIG);
-
-	if (mode)
-		config &= ~(NAND_WP_BIT);	/* WP is ON */
-	else
-		config |= (NAND_WP_BIT);	/* WP is OFF */
-
-	__raw_writel(config, (info->gpmc_baseaddr + GPMC_CONFIG));
-}
-
-/**
  * omap_hwcontrol - hardware specific access to control-lines
  * @mtd: MTD device structure
  * @cmd: command to device
@@ -181,31 +147,17 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct omap_nand_info *info = container_of(mtd,
 					struct omap_nand_info, mtd);
-	switch (ctrl) {
-	case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-
-	case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_ADDRESS;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-
-	case NAND_CTRL_CHANGE | NAND_NCE:
-		info->nand.IO_ADDR_W = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		info->nand.IO_ADDR_R = info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_DATA;
-		break;
-	}
 
-	if (cmd != NAND_CMD_NONE)
-		__raw_writeb(cmd, info->nand.IO_ADDR_W);
+	if (cmd != NAND_CMD_NONE) {
+		if (ctrl & NAND_CLE)
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_COMMAND, cmd);
+
+		else if (ctrl & NAND_ALE)
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_ADDRESS, cmd);
+
+		else /* NAND_NCE */
+			gpmc_nand_write(info->gpmc_cs, GPMC_NAND_DATA, cmd);
+	}
 }
 
 /**
@@ -232,11 +184,14 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u_char *p = (u_char *)buf;
+	u32	status = 0;
 
 	while (len--) {
 		iowrite8(*p++, info->nand.IO_ADDR_W);
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL));
+		/* wait until buffer is available for write */
+		do {
+			status = gpmc_read_status(GPMC_STATUS_BUFFER);
+		} while (!status);
 	}
 }
 
@@ -264,16 +219,16 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
 	u16 *p = (u16 *) buf;
-
+	u32	status = 0;
 	/* FIXME try bursts of writesw() or DMA ... */
 	len >>= 1;
 
 	while (len--) {
 		iowrite16(*p++, info->nand.IO_ADDR_W);
-
-		while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
-						GPMC_STATUS) & GPMC_BUF_FULL))
-			;
+		/* wait until buffer is available for write */
+		do {
+			status = gpmc_read_status(GPMC_STATUS_BUFFER);
+		} while (!status);
 	}
 }
 
@@ -287,7 +242,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, r_count = 0;
+	uint32_t r_count = 0;
 	int ret = 0;
 	u32 *p = (u32 *)buf;
 
@@ -310,16 +265,16 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 		else
 			omap_read_buf8(mtd, buf, len);
 	} else {
+		p = (u32 *) buf;
 		do {
-			pfpw_status = gpmc_prefetch_status();
-			r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
-			ioread32_rep(info->nand_pref_fifo_add, p, r_count);
+			r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+			r_count = r_count >> 2;
+			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
 			len -= r_count << 2;
 		} while (len);
-
 		/* disable and stop the PFPW engine */
-		gpmc_prefetch_reset();
+		gpmc_prefetch_reset(info->gpmc_cs);
 	}
 }
 
@@ -334,13 +289,13 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 {
 	struct omap_nand_info *info = container_of(mtd,
 						struct omap_nand_info, mtd);
-	uint32_t pfpw_status = 0, w_count = 0;
+	uint32_t pref_count = 0, w_count = 0;
 	int i = 0, ret = 0;
-	u16 *p = (u16 *) buf;
+	u16 *p;
 
 	/* take care of subpage writes */
 	if (len % 2 != 0) {
-		writeb(*buf, info->nand.IO_ADDR_R);
+		writeb(*buf, info->nand.IO_ADDR_W);
 		p = (u16 *)(buf + 1);
 		len--;
 	}
@@ -354,16 +309,19 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		else
 			omap_write_buf8(mtd, buf, len);
 	} else {
-		pfpw_status = gpmc_prefetch_status();
-		while (pfpw_status & 0x3FFF) {
-			w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
+		p = (u16 *) buf;
+		while (len) {
+			w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
-				iowrite16(*p++, info->nand_pref_fifo_add);
-			pfpw_status = gpmc_prefetch_status();
+				iowrite16(*p++, info->nand.IO_ADDR_W);
 		}
-
+		/* wait for data to flushed-out before reset the prefetch */
+		do {
+			pref_count = gpmc_read_status(GPMC_PREFETCH_COUNT);
+		} while (pref_count);
 		/* disable and stop the PFPW engine */
-		gpmc_prefetch_reset();
+		gpmc_prefetch_reset(info->gpmc_cs);
 	}
 }
 
@@ -451,8 +409,9 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	/* setup and start DMA using dma_addr */
 	wait_for_completion(&info->comp);
 
-	while (0x3fff & (prefetch_status = gpmc_prefetch_status()))
-		;
+	do {
+		prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
+	} while (prefetch_status);
 	/* disable and stop the PFPW engine */
 	gpmc_prefetch_reset();
 
@@ -530,29 +489,6 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len)
 }
 
 #ifdef CONFIG_MTD_NAND_OMAP_HWECC
-/**
- * omap_hwecc_init - Initialize the HW ECC for NAND flash in GPMC controller
- * @mtd: MTD device structure
- */
-static void omap_hwecc_init(struct mtd_info *mtd)
-{
-	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
-							mtd);
-	struct nand_chip *chip = mtd->priv;
-	unsigned long val = 0x0;
-
-	/* Read from ECC Control Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-	/* Clear all ECC | Enable Reg1 */
-	val = ((0x00000001<<8) | 0x00000001);
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-
-	/* Read from ECC Size Config Register */
-	val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-	/* ECCSIZE1=512 | Select eccResultsize[0-3] */
-	val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F));
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG);
-}
 
 /**
  * gen_true_ecc - This function will generate true ECC value
@@ -755,19 +691,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned long val = 0x0;
-	unsigned long reg;
-
-	/* Start Reading from HW ECC1_Result = 0x200 */
-	reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT);
-	val = __raw_readl(reg);
-	*ecc_code++ = val;          /* P128e, ..., P1e */
-	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-	reg += 4;
-
-	return 0;
+	return gpmc_calculate_ecc(info->gpmc_cs, dat, ecc_code);
 }
 
 /**
@@ -781,32 +705,10 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
 							mtd);
 	struct nand_chip *chip = mtd->priv;
 	unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
-	unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG);
-
-	switch (mode) {
-	case NAND_ECC_READ:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	case NAND_ECC_READSYN:
-		 __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	case NAND_ECC_WRITE:
-		__raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL);
-		/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-		val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
-		break;
-	default:
-		DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n",
-					mode);
-		break;
-	}
 
-	__raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG);
+	gpmc_enable_hwecc(info->gpmc_cs, mode, dev_width, info->nand.ecc.size);
 }
+
 #endif
 
 /**
@@ -834,14 +736,10 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	else
 		timeo += (HZ * 20) / 1000;
 
-	this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr +
-						GPMC_CS_NAND_COMMAND;
-	this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA;
-
-	__raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W);
-
+	gpmc_nand_write(info->gpmc_cs,
+			GPMC_NAND_COMMAND, (NAND_CMD_STATUS & 0xFF));
 	while (time_before(jiffies, timeo)) {
-		status = __raw_readb(this->IO_ADDR_R);
+		status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
 		if (status & NAND_STATUS_READY)
 			break;
 		cond_resched();
@@ -855,22 +753,22 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
  */
 static int omap_dev_ready(struct mtd_info *mtd)
 {
+	unsigned int val = 0;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 							mtd);
-	unsigned int val = __raw_readl(info->gpmc_baseaddr + GPMC_IRQ_STATUS);
 
+	val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
 	if ((val & 0x100) == 0x100) {
 		/* Clear IRQ Interrupt */
 		val |= 0x100;
 		val &= ~(0x0);
-		__raw_writel(val, info->gpmc_baseaddr + GPMC_IRQ_STATUS);
+		gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, val);
 	} else {
 		unsigned int cnt = 0;
 		while (cnt++ < 0x1FF) {
 			if  ((val & 0x100) == 0x100)
 				return 0;
-			val = __raw_readl(info->gpmc_baseaddr +
-							GPMC_IRQ_STATUS);
+			val = gpmc_read_status(GPMC_GET_IRQ_STATUS);
 		}
 	}
 
@@ -901,8 +799,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->pdev = pdev;
 
 	info->gpmc_cs		= pdata->cs;
-	info->gpmc_baseaddr	= pdata->gpmc_baseaddr;
-	info->gpmc_cs_baseaddr	= pdata->gpmc_cs_baseaddr;
 	info->phys_base		= pdata->phys_base;
 
 	info->mtd.priv		= &info->nand;
@@ -913,7 +809,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->nand.options	|= NAND_SKIP_BBTSCAN;
 
 	/* NAND write protect off */
-	omap_nand_wp(&info->mtd, NAND_WP_OFF);
+	gpmc_cs_configure(info->gpmc_cs, GPMC_CONFIG_WP, 0);
 
 	if (!request_mem_region(info->phys_base, NAND_IO_SIZE,
 				pdev->dev.driver->name)) {
@@ -948,8 +844,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	}
 
 	if (use_prefetch) {
-		/* copy the virtual address of nand base for fifo access */
-		info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
 
 		info->nand.read_buf   = omap_read_buf_pref;
 		info->nand.write_buf  = omap_write_buf_pref;
@@ -989,8 +883,6 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
 	info->nand.ecc.correct		= omap_correct_data;
 	info->nand.ecc.mode		= NAND_ECC_HW;
 
-	/* init HW ECC */
-	omap_hwecc_init(&info->mtd);
 #else
 	info->nand.ecc.mode = NAND_ECC_SOFT;
 #endif
@@ -1040,7 +932,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
-	iounmap(info->nand_pref_fifo_add);
+	iounmap(info->nand.IO_ADDR_R);
 	kfree(&info->mtd);
 	return 0;
 }
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ebe68395ecf..5a6895320b4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -484,7 +484,7 @@ config XTENSA_XT2000_SONIC
 
 config MIPS_AU1X00_ENET
 	tristate "MIPS AU1000 Ethernet support"
-	depends on SOC_AU1X00
+	depends on MIPS_ALCHEMY
 	select PHYLIB
 	select CRC32
 	help
@@ -914,7 +914,7 @@ config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+	depends on ARM || M32R || SUPERH || \
 		MIPS || BLACKFIN || MN10300 || COLDFIRE
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 386d4feec65..15ae6df2ff0 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -104,14 +104,6 @@ MODULE_VERSION(DRV_VERSION);
  * complete immediately.
  */
 
-/* These addresses are only used if yamon doesn't tell us what
- * the mac address is, and the mac address is not passed on the
- * command line.
- */
-static unsigned char au1000_mac_addr[6] __devinitdata = {
-	0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00
-};
-
 struct au1000_private *au_macs[NUM_ETH_INTERFACES];
 
 /*
@@ -1002,7 +994,6 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	db_dest_t *pDB, *pDBfree;
 	int irq, i, err = 0;
 	struct resource *base, *macen;
-	char ethaddr[6];
 
 	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!base) {
@@ -1079,24 +1070,13 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	}
 	aup->mac_id = pdev->id;
 
-	if (pdev->id == 0) {
-		if (prom_get_ethernet_addr(ethaddr) == 0)
-			memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
-		else {
-			netdev_info(dev, "No MAC address found\n");
-				/* Use the hard coded MAC addresses */
-		}
-
+	if (pdev->id == 0)
 		au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-	} else if (pdev->id == 1)
+	else if (pdev->id == 1)
 		au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
 
-	/*
-	 * Assign to the Ethernet ports two consecutive MAC addresses
-	 * to match those that are printed on their stickers
-	 */
-	memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
-	dev->dev_addr[5] += pdev->id;
+	/* set a random MAC now in case platform_data doesn't provide one */
+	random_ether_addr(dev->dev_addr);
 
 	*aup->enable = 0;
 	aup->mac_enabled = 0;
@@ -1106,6 +1086,9 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 		dev_info(&pdev->dev, "no platform_data passed, PHY search on MAC0\n");
 		aup->phy1_search_mac0 = 1;
 	} else {
+		if (is_valid_ether_addr(pd->mac))
+			memcpy(dev->dev_addr, pd->mac, 6);
+
 		aup->phy_static_config = pd->phy_static_config;
 		aup->phy_search_highest_addr = pd->phy_search_highest_addr;
 		aup->phy1_search_mac0 = pd->phy1_search_mac0;
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 066fd5b09fd..ad19585d960 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -3198,17 +3198,17 @@ static int __devinit init_one(struct pci_dev *pdev,
 		}
 	}
 
-	err = pci_request_regions(pdev, DRV_NAME);
+	err = pci_enable_device(pdev);
 	if (err) {
-		/* Just info, some other driver may have claimed the device. */
-		dev_info(&pdev->dev, "cannot obtain PCI resources\n");
-		return err;
+		dev_err(&pdev->dev, "cannot enable PCI device\n");
+		goto out;
 	}
 
-	err = pci_enable_device(pdev);
+	err = pci_request_regions(pdev, DRV_NAME);
 	if (err) {
-		dev_err(&pdev->dev, "cannot enable PCI device\n");
-		goto out_release_regions;
+		/* Just info, some other driver may have claimed the device. */
+		dev_info(&pdev->dev, "cannot obtain PCI resources\n");
+		goto out_disable_device;
 	}
 
 	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
@@ -3217,11 +3217,11 @@ static int __devinit init_one(struct pci_dev *pdev,
 		if (err) {
 			dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
 			       "coherent allocations\n");
-			goto out_disable_device;
+			goto out_release_regions;
 		}
 	} else if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
 		dev_err(&pdev->dev, "no usable DMA configuration\n");
-		goto out_disable_device;
+		goto out_release_regions;
 	}
 
 	pci_set_master(pdev);
@@ -3234,7 +3234,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
 	if (!adapter) {
 		err = -ENOMEM;
-		goto out_disable_device;
+		goto out_release_regions;
 	}
 
 	adapter->nofail_skb =
@@ -3370,11 +3370,12 @@ out_free_dev:
 out_free_adapter:
 	kfree(adapter);
 
-out_disable_device:
-	pci_disable_device(pdev);
 out_release_regions:
 	pci_release_regions(pdev);
+out_disable_device:
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
+out:
 	return err;
 }
 
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index a16563219ac..7b6d07f50c7 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2462,23 +2462,24 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		version_printed = 1;
 	}
 
+
 	/*
-	 * Reserve PCI resources for the device.  If we can't get them some
-	 * other driver may have already claimed the device ...
+	 * Initialize generic PCI device state.
 	 */
-	err = pci_request_regions(pdev, KBUILD_MODNAME);
+	err = pci_enable_device(pdev);
 	if (err) {
-		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+		dev_err(&pdev->dev, "cannot enable PCI device\n");
 		return err;
 	}
 
 	/*
-	 * Initialize generic PCI device state.
+	 * Reserve PCI resources for the device.  If we can't get them some
+	 * other driver may have already claimed the device ...
 	 */
-	err = pci_enable_device(pdev);
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
 	if (err) {
-		dev_err(&pdev->dev, "cannot enable PCI device\n");
-		goto err_release_regions;
+		dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+		goto err_disable_device;
 	}
 
 	/*
@@ -2491,14 +2492,14 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		if (err) {
 			dev_err(&pdev->dev, "unable to obtain 64-bit DMA for"
 				" coherent allocations\n");
-			goto err_disable_device;
+			goto err_release_regions;
 		}
 		pci_using_dac = 1;
 	} else {
 		err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 		if (err != 0) {
 			dev_err(&pdev->dev, "no usable DMA configuration\n");
-			goto err_disable_device;
+			goto err_release_regions;
 		}
 		pci_using_dac = 0;
 	}
@@ -2514,7 +2515,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
 	if (!adapter) {
 		err = -ENOMEM;
-		goto err_disable_device;
+		goto err_release_regions;
 	}
 	pci_set_drvdata(pdev, adapter);
 	adapter->pdev = pdev;
@@ -2750,13 +2751,13 @@ err_free_adapter:
 	kfree(adapter);
 	pci_set_drvdata(pdev, NULL);
 
-err_disable_device:
-	pci_disable_device(pdev);
-	pci_clear_master(pdev);
-
 err_release_regions:
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_clear_master(pdev);
+
+err_disable_device:
+	pci_disable_device(pdev);
 
 err_out:
 	return err;
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index d0824e32206..7fbd052ddb0 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -2944,8 +2944,8 @@ static int __devexit davinci_emac_remove(struct platform_device *pdev)
 	release_mem_region(res->start, res->end - res->start + 1);
 
 	unregister_netdev(ndev);
-	free_netdev(ndev);
 	iounmap(priv->remap_addr);
+	free_netdev(ndev);
 
 	clk_disable(emac_clk);
 	clk_put(emac_clk);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index b194bad29ac..8e2eab4e7c7 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1779,6 +1779,7 @@ static int e100_tx_clean(struct nic *nic)
 	for (cb = nic->cb_to_clean;
 	    cb->status & cpu_to_le16(cb_complete);
 	    cb = nic->cb_to_clean = cb->next) {
+		rmb(); /* read skb after status */
 		netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
 			     "cb[%d]->status = 0x%04X\n",
 			     (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
@@ -1927,6 +1928,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
 	netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
 		     "status=0x%04X\n", rfd_status);
+	rmb(); /* read size after status bit */
 
 	/* If data isn't ready, nothing to indicate */
 	if (unlikely(!(rfd_status & cb_complete))) {
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 02833af8a0b..5cc39ed289c 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3454,6 +3454,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
 		bool cleaned = false;
+		rmb();	/* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -3643,6 +3644,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
@@ -3849,6 +3851,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 36d31a41632..2b8ef44bd2b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -781,6 +781,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
@@ -991,6 +992,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 	while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for (; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -1087,6 +1089,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			break;
 		(*work_done)++;
 		skb = buffer_info->skb;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		/* in the packet split case this is header only */
 		prefetch(skb->data - NET_IP_ALIGN);
@@ -1286,6 +1289,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 
 		status = rx_desc->status;
 		skb = buffer_info->skb;
@@ -5825,11 +5829,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 
 	e1000_print_device_info(adapter);
 
-	if (pci_dev_run_wake(pdev)) {
-		pm_runtime_set_active(&pdev->dev);
-		pm_runtime_enable(&pdev->dev);
-	}
-	pm_schedule_suspend(&pdev->dev, MSEC_PER_SEC);
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_put_noidle(&pdev->dev);
 
 	return 0;
 
@@ -5875,8 +5876,6 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	bool down = test_bit(__E1000_DOWN, &adapter->state);
 
-	pm_runtime_get_sync(&pdev->dev);
-
 	/*
 	 * flush_scheduled work may reschedule our watchdog task, so
 	 * explicitly disable watchdog tasks from being rescheduled
@@ -5901,11 +5900,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 		clear_bit(__E1000_DOWN, &adapter->state);
 	unregister_netdev(netdev);
 
-	if (pci_dev_run_wake(pdev)) {
-		pm_runtime_disable(&pdev->dev);
-		pm_runtime_set_suspended(&pdev->dev);
-	}
-	pm_runtime_put_noidle(&pdev->dev);
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_get_noresume(&pdev->dev);
 
 	/*
 	 * Release control of h/w to f/w.  If f/w is AMT enabled, this
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index 77a7f87d498..9aab85366d2 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1087,10 +1087,7 @@ static int enic_set_port_profile(struct enic *enic, u8 *mac)
 {
 	struct vic_provinfo *vp;
 	u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
-	u8 *uuid;
 	char uuid_str[38];
-	static char *uuid_fmt = "%02X%02X%02X%02X-%02X%02X-%02X%02X-"
-		"%02X%02X-%02X%02X%02X%02X%0X%02X";
 	int err;
 
 	err = enic_vnic_dev_deinit(enic);
@@ -1121,24 +1118,14 @@ static int enic_set_port_profile(struct enic *enic, u8 *mac)
 			ETH_ALEN, mac);
 
 		if (enic->pp.set & ENIC_SET_INSTANCE) {
-			uuid = enic->pp.instance_uuid;
-			sprintf(uuid_str, uuid_fmt,
-				uuid[0],  uuid[1],  uuid[2],  uuid[3],
-				uuid[4],  uuid[5],  uuid[6],  uuid[7],
-				uuid[8],  uuid[9],  uuid[10], uuid[11],
-				uuid[12], uuid[13], uuid[14], uuid[15]);
+			sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
 			vic_provinfo_add_tlv(vp,
 				VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
 				sizeof(uuid_str), uuid_str);
 		}
 
 		if (enic->pp.set & ENIC_SET_HOST) {
-			uuid = enic->pp.host_uuid;
-			sprintf(uuid_str, uuid_fmt,
-				uuid[0],  uuid[1],  uuid[2],  uuid[3],
-				uuid[4],  uuid[5],  uuid[6],  uuid[7],
-				uuid[8],  uuid[9],  uuid[10], uuid[11],
-				uuid[12], uuid[13], uuid[14], uuid[15]);
+			sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
 			vic_provinfo_add_tlv(vp,
 				VIC_LINUX_PROV_TLV_HOST_UUID_STR,
 				sizeof(uuid_str), uuid_str);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index b4c41d72c42..f53f850b641 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -35,6 +35,7 @@
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 0f1d4e96cf8..eeec7bc2ce7 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2339,11 +2339,11 @@ static int __devinit emac_wait_deps(struct emac_instance *dev)
 		deps[EMAC_DEP_MDIO_IDX].phandle = dev->mdio_ph;
 	if (dev->blist && dev->blist > emac_boot_list)
 		deps[EMAC_DEP_PREV_IDX].phandle = 0xffffffffu;
-	bus_register_notifier(&of_platform_bus_type, &emac_of_bus_notifier);
+	bus_register_notifier(&platform_bus_type, &emac_of_bus_notifier);
 	wait_event_timeout(emac_probe_wait,
 			   emac_check_deps(dev, deps),
 			   EMAC_PROBE_DEP_TIMEOUT);
-	bus_unregister_notifier(&of_platform_bus_type, &emac_of_bus_notifier);
+	bus_unregister_notifier(&platform_bus_type, &emac_of_bus_notifier);
 	err = emac_check_deps(dev, deps) ? 0 : -ENODEV;
 	for (i = 0; i < EMAC_DEP_COUNT; i++) {
 		if (deps[i].node)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index f0f82dc7c5d..aaf506c56cc 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -5353,6 +5353,7 @@ static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
 
 	while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
+		rmb();	/* read buffer_info after eop_desc status */
 		for (cleaned = false; !cleaned; count++) {
 			tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -5558,6 +5559,7 @@ static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
 		if (*work_done >= budget)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		skb = buffer_info->skb;
 		prefetch(skb->data - NET_IP_ALIGN);
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index ec808fa8dc2..c539f7c9c3e 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -248,6 +248,7 @@ static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
 		if (*work_done >= work_to_do)
 			break;
 		(*work_done)++;
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 
 		buffer_info = &rx_ring->buffer_info[i];
 
@@ -780,6 +781,7 @@ static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
 
 	while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
 	       (count < tx_ring->count)) {
+		rmb();	/* read buffer_info after eop_desc status */
 		for (cleaned = false; !cleaned; count++) {
 			tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index c6b75c83100..45fc89b9ba6 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1816,6 +1816,7 @@ ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
 
 	while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
 
+		rmb(); /* read buffer_info after eop_desc */
 		for (cleaned = false; !cleaned; ) {
 			tx_desc = IXGB_TX_DESC(*tx_ring, i);
 			buffer_info = &tx_ring->buffer_info[i];
@@ -1976,6 +1977,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
 			break;
 
 		(*work_done)++;
+		rmb();	/* read descriptor and rx_buffer_info after status DD */
 		status = rx_desc->status;
 		skb = buffer_info->skb;
 		buffer_info->skb = NULL;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 7d6a415bcf8..e32af434cc9 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -748,6 +748,7 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
 	       (count < tx_ring->work_limit)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
@@ -6155,9 +6156,11 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 			txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
 			txq += adapter->ring_feature[RING_F_FCOE].mask;
 			return txq;
+#ifdef CONFIG_IXGBE_DCB
 		} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
 			txq = adapter->fcoe.up;
 			return txq;
+#endif
 		}
 	}
 #endif
@@ -6216,10 +6219,14 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb,
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
 	    (skb->protocol == htons(ETH_P_FCOE) ||
 	     skb->protocol == htons(ETH_P_FIP))) {
-		tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
-			      << IXGBE_TX_FLAGS_VLAN_SHIFT);
-		tx_flags |= ((adapter->fcoe.up << 13)
-			      << IXGBE_TX_FLAGS_VLAN_SHIFT);
+#ifdef CONFIG_IXGBE_DCB
+		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+			tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
+				      << IXGBE_TX_FLAGS_VLAN_SHIFT);
+			tx_flags |= ((adapter->fcoe.up << 13)
+				      << IXGBE_TX_FLAGS_VLAN_SHIFT);
+		}
+#endif
 		/* flag for FCoE offloads */
 		if (skb->protocol == htons(ETH_P_FCOE))
 			tx_flags |= IXGBE_TX_FLAGS_FCOE;
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 3e291ccc629..918c00359b0 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -231,6 +231,7 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
 	while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
 	       (count < tx_ring->work_limit)) {
 		bool cleaned = false;
+		rmb(); /* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
 			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
@@ -518,6 +519,7 @@ static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
 			break;
 		(*work_done)++;
 
+		rmb(); /* read descriptor and rx_buffer_info after status DD */
 		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
 			hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
 			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 1a57c3da1f4..04e552aa14e 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1079,7 +1079,7 @@ static int __devinit myri_sbus_probe(struct of_device *op, const struct of_devic
 
 	mp->dev = dev;
 	dev->watchdog_timeo = 5*HZ;
-	dev->irq = op->irqs[0];
+	dev->irq = op->archdata.irqs[0];
 	dev->netdev_ops = &myri_ops;
 
 	/* Register interrupt handler now. */
@@ -1172,12 +1172,12 @@ static struct of_platform_driver myri_sbus_driver = {
 
 static int __init myri_sbus_init(void)
 {
-	return of_register_driver(&myri_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&myri_sbus_driver);
 }
 
 static void __exit myri_sbus_exit(void)
 {
-	of_unregister_driver(&myri_sbus_driver);
+	of_unregister_platform_driver(&myri_sbus_driver);
 }
 
 module_init(myri_sbus_init);
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 6ce6ce1df6d..fd86e18604e 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -2001,27 +2001,26 @@ static void netxen_tx_timeout_task(struct work_struct *work)
 	if (++adapter->tx_timeo_cnt >= NX_MAX_TX_TIMEOUTS)
 		goto request_reset;
 
+	rtnl_lock();
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 		/* try to scrub interrupt */
 		netxen_napi_disable(adapter);
 
-		adapter->netdev->trans_start = jiffies;
-
 		netxen_napi_enable(adapter);
 
 		netif_wake_queue(adapter->netdev);
 
 		clear_bit(__NX_RESETTING, &adapter->state);
-		return;
 	} else {
 		clear_bit(__NX_RESETTING, &adapter->state);
-		if (!netxen_nic_reset_context(adapter)) {
-			adapter->netdev->trans_start = jiffies;
-			return;
+		if (netxen_nic_reset_context(adapter)) {
+			rtnl_unlock();
+			goto request_reset;
 		}
-
-		/* context reset failed, fall through for fw reset */
 	}
+	adapter->netdev->trans_start = jiffies;
+	rtnl_unlock();
+	return;
 
 request_reset:
 	adapter->need_fw_reset = 1;
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index b9b950845b0..404f2d55288 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -28,10 +28,7 @@
 #include <linux/slab.h>
 
 #include <linux/io.h>
-
-#ifdef CONFIG_SPARC64
 #include <linux/of_device.h>
-#endif
 
 #include "niu.h"
 
@@ -9114,12 +9111,12 @@ static int __devinit niu_n2_irq_init(struct niu *np, u8 *ldg_num_map)
 	if (!int_prop)
 		return -ENODEV;
 
-	for (i = 0; i < op->num_irqs; i++) {
+	for (i = 0; i < op->archdata.num_irqs; i++) {
 		ldg_num_map[i] = int_prop[i];
-		np->ldg[i].irq = op->irqs[i];
+		np->ldg[i].irq = op->archdata.irqs[i];
 	}
 
-	np->num_ldg = op->num_irqs;
+	np->num_ldg = op->archdata.num_irqs;
 
 	return 0;
 #else
@@ -10249,14 +10246,14 @@ static int __init niu_init(void)
 	niu_debug = netif_msg_init(debug, NIU_MSG_DEFAULT);
 
 #ifdef CONFIG_SPARC64
-	err = of_register_driver(&niu_of_driver, &of_bus_type);
+	err = of_register_platform_driver(&niu_of_driver);
 #endif
 
 	if (!err) {
 		err = pci_register_driver(&niu_pci_driver);
 #ifdef CONFIG_SPARC64
 		if (err)
-			of_unregister_driver(&niu_of_driver);
+			of_unregister_platform_driver(&niu_of_driver);
 #endif
 	}
 
@@ -10267,7 +10264,7 @@ static void __exit niu_exit(void)
 {
 	pci_unregister_driver(&niu_pci_driver);
 #ifdef CONFIG_SPARC64
-	of_unregister_driver(&niu_of_driver);
+	of_unregister_platform_driver(&niu_of_driver);
 #endif
 }
 
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index d6715465f35..a41fa8ebe05 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -3236,7 +3236,7 @@ struct niu_phy_ops {
 	int (*link_status)(struct niu *np, int *);
 };
 
-struct of_device;
+struct platform_device;
 struct niu {
 	void __iomem			*regs;
 	struct net_device		*dev;
@@ -3297,7 +3297,7 @@ struct niu {
 	struct niu_vpd			vpd;
 	u32				eeprom_len;
 
-	struct of_device		*op;
+	struct platform_device		*op;
 	void __iomem			*vir_regs_1;
 	void __iomem			*vir_regs_2;
 };
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 10ee106a161..c683f77c6f4 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -87,7 +87,6 @@ earlier 3Com products.
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -279,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link)
 	lp->p_dev = link;
 
 	spin_lock_init(&lp->window_lock);
-	link->io.NumPorts1 = 32;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->end = 32;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
@@ -338,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "3c574_config()\n");
 
-	link->io.IOAddrLines = 16;
+	link->io_lines = 16;
+
 	for (i = j = 0; j < 0x400; j += 0x20) {
-		link->io.BasePort1 = j ^ 0x300;
-		i = pcmcia_request_io(link, &link->io);
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
 		if (i == 0)
 			break;
 	}
@@ -357,7 +357,7 @@ static int tc574_config(struct pcmcia_device *link)
 		goto failed;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 
 	ioaddr = dev->base_addr;
 
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ce63c3773b4..61f9cf2100f 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -41,7 +41,6 @@
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -214,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link)
     lp->p_dev = link;
 
     spin_lock_init(&lp->lock);
-    link->io.NumPorts1 = 16;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+    link->resource[0]->end = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
@@ -278,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link)
 		   "3Com card??\n");
     multi = (link->card_id == PRODID_3COM_3C562);
 
+    link->io_lines = 16;
+
     /* For the 3c562, the base address must be xx00-xx7f */
-    link->io.IOAddrLines = 16;
     for (i = j = 0; j < 0x400; j += 0x10) {
 	if (multi && (j & 0x80)) continue;
-	link->io.BasePort1 = j ^ 0x300;
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = j ^ 0x300;
+	i = pcmcia_request_io(link);
 	if (i == 0)
 		break;
     }
@@ -299,7 +299,7 @@ static int tc589_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
     ioaddr = dev->base_addr;
     EL3WINDOW(0);
 
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 33525bf2a3d..5f05ffb240c 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -260,28 +259,30 @@ static int get_prom(struct pcmcia_device *link)
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
-    if (link->io.NumPorts1 == 32) {
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+    if (link->resource[0]->end == 32) {
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	/* for master/slave multifunction cards */
-	if (link->io.NumPorts2 > 0)
-	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	if (link->resource[1]->end > 0)
+	    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     } else {
 	/* This should be two 16-port windows */
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
     }
-    if (link->io.BasePort1 == 0) {
-	link->io.IOAddrLines = 16;
+    if (link->resource[0]->start == 0) {
 	for (j = 0; j < 0x400; j += 0x20) {
-	    link->io.BasePort1 = j ^ 0x300;
-	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
-	    ret = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = j ^ 0x300;
+	    link->resource[1]->start = (j ^ 0x300) + 0x10;
+	    link->io_lines = 16;
+	    ret = pcmcia_request_io(link);
 	    if (ret == 0)
 		    return ret;
 	}
 	return ret;
     } else {
-	return pcmcia_request_io(link, &link->io);
+	return pcmcia_request_io(link);
     }
 }
 
@@ -302,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev,
 	   network function with window 0, and serial with window 1 */
 	if (io->nwin > 1) {
 		i = (io->win[1].len > io->win[0].len);
-		p_dev->io.BasePort2 = io->win[1-i].base;
-		p_dev->io.NumPorts2 = io->win[1-i].len;
+		p_dev->resource[1]->start = io->win[1-i].base;
+		p_dev->resource[1]->end = io->win[1-i].len;
 	} else {
-		i = p_dev->io.NumPorts2 = 0;
+		i = p_dev->resource[1]->end = 0;
 	}
-	p_dev->io.BasePort1 = io->win[i].base;
-	p_dev->io.NumPorts1 = io->win[i].len;
-	p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-	if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+	p_dev->resource[0]->start = io->win[i].base;
+	p_dev->resource[0]->end = io->win[i].len;
+	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
 		return try_io_port(p_dev);
 
 	return -ENODEV;
@@ -333,7 +334,7 @@ static int axnet_config(struct pcmcia_device *link)
     if (!link->irq)
 	    goto failed;
     
-    if (link->io.NumPorts2 == 8) {
+    if (resource_size(link->resource[1]) == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
@@ -343,7 +344,7 @@ static int axnet_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     if (!get_prom(link)) {
 	printk(KERN_NOTICE "axnet_cs: this is not an AX88190 card!\n");
@@ -379,8 +380,7 @@ static int axnet_config(struct pcmcia_device *link)
     /* Maybe PHY is in power down mode. (PPD_SET = 1) 
        Bit 2 of CCSR is active low. */ 
     if (i == 32) {
-	conf_reg_t reg = { 0, CS_WRITE, CISREG_CCSR, 0x04 };
- 	pcmcia_access_configuration_register(link, &reg);
+	pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
 	for (i = 0; i < 32; i++) {
 	    j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	    j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 5643f94541b..3c400cfa82a 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -43,7 +43,6 @@
 #include <linux/arcdevice.h>
 #include <linux/com20020.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -159,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev)
     /* fill in our module parameters as defaults */
     dev->dev_addr[0] = node;
 
-    p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    p_dev->io.NumPorts1 = 16;
-    p_dev->io.IOAddrLines = 16;
+    p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    p_dev->resource[0]->end = 16;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -246,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "com20020_config\n");
 
-    dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
+    dev_dbg(&link->dev, "baseport1 is %Xh\n",
+	    (unsigned int) link->resource[0]->start);
+
     i = -ENODEV;
-    if (!link->io.BasePort1)
+    link->io_lines = 16;
+
+    if (!link->resource[0]->start)
     {
 	for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
 	{
-	    link->io.BasePort1 = ioaddr;
-	    i = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = ioaddr;
+	    i = pcmcia_request_io(link);
 	    if (i == 0)
 		break;
 	}
     }
     else
-	i = pcmcia_request_io(link, &link->io);
+	i = pcmcia_request_io(link);
     
     if (i != 0)
     {
@@ -267,7 +269,7 @@ static int com20020_config(struct pcmcia_device *link)
 	goto failed;
     }
 	
-    ioaddr = dev->base_addr = link->io.BasePort1;
+    ioaddr = dev->base_addr = link->resource[0]->start;
     dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
     dev_dbg(&link->dev, "request IRQ %d\n",
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 7c27c50211a..98fffb03ecd 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -49,7 +49,6 @@
 #include <linux/ioport.h>
 #include <linux/crc32.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -249,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link)
     lp->base = NULL;
 
     /* The io structure describes IO port mapping */
-    link->io.NumPorts1 = 32;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 5;
+    link->resource[0]->end = 32;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -289,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link)
 	{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
 
     for (i = 0; i < 5; i++) {
-	link->io.BasePort2 = serial_base[i];
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	if (link->io.BasePort2 == 0) {
-	    link->io.NumPorts2 = 0;
+	link->resource[1]->start = serial_base[i];
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+	if (link->resource[1]->start == 0) {
+	    link->resource[1]->end = 0;
 	    printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
 	}
-	ret = pcmcia_request_io(link, &link->io);
+	ret = pcmcia_request_io(link);
 	if (ret == 0)
 		return ret;
     }
@@ -311,12 +309,12 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
 	0x380,0x3c0 only for ioport.
     */
     for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
-	link->io.BasePort1 = ioaddr;
-	ret = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = ioaddr;
+	ret = pcmcia_request_io(link);
 	if (ret == 0) {
 	    /* calculate ConfigIndex value */
 	    link->conf.ConfigIndex = 
-		((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
+		((link->resource[0]->start & 0x0f0) >> 3) | 0x22;
 	    return ret;
 	}
     }
@@ -346,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
 
     dev_dbg(&link->dev, "fmvj18x_config\n");
 
+    link->io_lines = 5;
+
     len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
     kfree(buf);
 
@@ -364,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link)
 		/* MultiFunction Card */
 		link->conf.ConfigBase = 0x800;
 		link->conf.ConfigIndex = 0x47;
-		link->io.NumPorts2 = 8;
+		link->resource[1]->end = 8;
 	    }
 	    break;
 	case MANFID_NEC:
 	    cardtype = NEC; /* MultiFunction Card */
 	    link->conf.ConfigBase = 0x800;
 	    link->conf.ConfigIndex = 0x47;
-	    link->io.NumPorts2 = 8;
+	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_KME:
 	    cardtype = KME; /* MultiFunction Card */
 	    link->conf.ConfigBase = 0x800;
 	    link->conf.ConfigIndex = 0x47;
-	    link->io.NumPorts2 = 8;
+	    link->resource[1]->end = 8;
 	    break;
 	case MANFID_CONTEC:
 	    cardtype = CONTEC;
@@ -418,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	}
     }
 
-    if (link->io.NumPorts2 != 0) {
+    if (link->resource[1]->end != 0) {
 	ret = mfc_try_io_port(link);
 	if (ret != 0) goto failed;
     } else if (cardtype == UNGERMANN) {
 	ret = ungermann_try_io_port(link);
 	if (ret != 0) goto failed;
     } else { 
-	    ret = pcmcia_request_io(link, &link->io);
+	    ret = pcmcia_request_io(link);
 	    if (ret)
 		    goto failed;
     }
@@ -437,9 +437,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
 	    goto failed;
 
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
-    if (link->io.BasePort2 != 0) {
+    if (resource_size(link->resource[1]) != 0) {
 	ret = fmvj18x_setup_mfc(link);
 	if (ret != 0) goto failed;
     }
@@ -545,7 +545,6 @@ failed:
 static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 {
     win_req_t req;
-    memreq_t mem;
     u_char __iomem *base;
     int i, j;
 
@@ -558,9 +557,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 	return -1;
 
     base = ioremap(req.Base, req.Size);
-    mem.Page = 0;
-    mem.CardOffset = 0;
-    pcmcia_map_mem_page(link, link->win, &mem);
+    pcmcia_map_mem_page(link, link->win, 0);
 
     /*
      *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -594,7 +591,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
 static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 {
     win_req_t req;
-    memreq_t mem;
     int i;
     struct net_device *dev = link->priv;
     unsigned int ioaddr;
@@ -614,9 +610,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
 	return -1;
     }
 
-    mem.Page = 0;
-    mem.CardOffset = 0;
-    i = pcmcia_map_mem_page(link, link->win, &mem);
+    i = pcmcia_map_mem_page(link, link->win, 0);
     if (i != 0) {
 	iounmap(lp->base);
 	lp->base = NULL;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 67ee9851a8e..b0d06a3d962 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -57,7 +57,6 @@
 #include <linux/trdevice.h>
 #include <linux/ibmtr.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -152,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
     link->priv = info;
     info->ti = netdev_priv(dev);
 
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts1 = 4;
-    link->io.IOAddrLines = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[0]->end = 4;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -213,26 +211,26 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     struct net_device *dev = info->dev;
     struct tok_info *ti = netdev_priv(dev);
     win_req_t req;
-    memreq_t mem;
     int i, ret;
 
     dev_dbg(&link->dev, "ibmtr_config\n");
 
     link->conf.ConfigIndex = 0x61;
+    link->io_lines = 16;
 
     /* Determine if this is PRIMARY or ALTERNATE. */
 
     /* Try PRIMARY card at 0xA20-0xA23 */
-    link->io.BasePort1 = 0xA20;
-    i = pcmcia_request_io(link, &link->io);
+    link->resource[0]->start = 0xA20;
+    i = pcmcia_request_io(link);
     if (i != 0) {
 	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
-	link->io.BasePort1 = 0xA24;
-	ret = pcmcia_request_io(link, &link->io);
+	link->resource[0]->start = 0xA24;
+	ret = pcmcia_request_io(link);
 	if (ret)
 		goto failed;
     }
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt);
     if (ret)
@@ -251,9 +249,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = mmiobase;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    ret = pcmcia_map_mem_page(link, link->win, mmiobase);
     if (ret)
 	    goto failed;
     ti->mmio = ioremap(req.Base, req.Size);
@@ -268,13 +264,11 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = srambase;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
+    ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase);
     if (ret)
 	    goto failed;
 
-    ti->sram_base = mem.CardOffset >> 12;
+    ti->sram_base = srambase >> 12;
     ti->sram_virt = ioremap(req.Base, req.Size);
     ti->sram_phys = req.Base;
 
@@ -325,7 +319,6 @@ static void ibmtr_release(struct pcmcia_device *link)
 	if (link->win) {
 		struct tok_info *ti = netdev_priv(dev);
 		iounmap(ti->mmio);
-		pcmcia_release_window(link, info->sram_win_handle);
 	}
 	pcmcia_disable_device(link);
 }
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 9b63dec549c..68f2deeb3ad 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -146,7 +146,6 @@ Include Files
 #include <linux/ioport.h>
 #include <linux/bitops.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/cistpl.h>
@@ -459,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link)
     link->priv = dev;
     
     spin_lock_init(&lp->bank_lock);
-    link->io.NumPorts1 = 32;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 5;
+    link->resource[0]->end = 32;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -645,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link)
 
   dev_dbg(&link->dev, "nmclan_config\n");
 
-  ret = pcmcia_request_io(link, &link->io);
+  link->io_lines = 5;
+  ret = pcmcia_request_io(link);
   if (ret)
 	  goto failed;
   ret = pcmcia_request_exclusive_irq(link, mace_interrupt);
@@ -656,7 +655,7 @@ static int nmclan_config(struct pcmcia_device *link)
 	  goto failed;
 
   dev->irq = link->irq;
-  dev->base_addr = link->io.BasePort1;
+  dev->base_addr = link->resource[0]->start;
 
   ioaddr = dev->base_addr;
 
@@ -758,29 +757,20 @@ static void nmclan_reset(struct net_device *dev)
 
 #if RESET_XILINX
   struct pcmcia_device *link = &lp->link;
-  conf_reg_t reg;
-  u_long OrigCorValue; 
+  u8 OrigCorValue;
 
   /* Save original COR value */
-  reg.Function = 0;
-  reg.Action = CS_READ;
-  reg.Offset = CISREG_COR;
-  reg.Value = 0;
-  pcmcia_access_configuration_register(link, &reg);
-  OrigCorValue = reg.Value;
+  pcmcia_read_config_byte(link, CISREG_COR, &OrigCorValue);
 
   /* Reset Xilinx */
-  reg.Action = CS_WRITE;
-  reg.Offset = CISREG_COR;
-  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%x, resetting...\n",
 	OrigCorValue);
-  reg.Value = COR_SOFT_RESET;
-  pcmcia_access_configuration_register(link, &reg);
+  pcmcia_write_config_byte(link, CISREG_COR, COR_SOFT_RESET);
   /* Need to wait for 20 ms for PCMCIA to finish reset. */
 
   /* Restore original COR configuration index */
-  reg.Value = COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK);
-  pcmcia_access_configuration_register(link, &reg);
+  pcmcia_write_config_byte(link, CISREG_COR,
+			  (COR_LEVEL_REQ | (OrigCorValue & COR_CONFIG_MASK)));
   /* Xilinx is now completely reset along with the MACE chip. */
   lp->tx_free_frames=AM2150_MAX_TX_FRAMES;
 
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bfdef72c5d5..c3edfe4c265 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -42,7 +42,6 @@
 #include <linux/mii.h>
 #include "../8390.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -113,8 +112,6 @@ static int setup_dma_config(struct pcmcia_device *link, int start_pg,
 
 static void pcnet_detach(struct pcmcia_device *p_dev);
 
-static dev_info_t dev_info = "pcnet_cs";
-
 /*====================================================================*/
 
 typedef struct hw_info_t {
@@ -304,7 +301,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     win_req_t req;
-    memreq_t mem;
     u_char __iomem *base, *virt;
     int i, j;
 
@@ -317,10 +313,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
 	return NULL;
 
     virt = ioremap(req.Base, req.Size);
-    mem.Page = 0;
     for (i = 0; i < NR_INFO; i++) {
-	mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
-	pcmcia_map_mem_page(link, link->win, &mem);
+	pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1));
 	base = &virt[hw_info[i].offset & (req.Size-1)];
 	if ((readb(base+0) == hw_info[i].a0) &&
 	    (readb(base+2) == hw_info[i].a1) &&
@@ -480,29 +474,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
-    if (link->io.NumPorts1 == 32) {
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	if (link->io.NumPorts2 > 0) {
+    link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+    link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+    if (link->resource[0]->end == 32) {
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	if (link->resource[1]->end > 0) {
 	    /* for master/slave multifunction cards */
-	    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	}
     } else {
 	/* This should be two 16-port windows */
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
     }
-    if (link->io.BasePort1 == 0) {
-	link->io.IOAddrLines = 16;
+    if (link->resource[0]->start == 0) {
 	for (j = 0; j < 0x400; j += 0x20) {
-	    link->io.BasePort1 = j ^ 0x300;
-	    link->io.BasePort2 = (j ^ 0x300) + 0x10;
-	    ret = pcmcia_request_io(link, &link->io);
+	    link->resource[0]->start = j ^ 0x300;
+	    link->resource[1]->start = (j ^ 0x300) + 0x10;
+	    link->io_lines = 16;
+	    ret = pcmcia_request_io(link);
 	    if (ret == 0)
 		    return ret;
 	}
 	return ret;
     } else {
-	return pcmcia_request_io(link, &link->io);
+	return pcmcia_request_io(link);
     }
 }
 
@@ -523,18 +519,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
 	   network function with window 0, and serial with window 1 */
 	if (io->nwin > 1) {
 		i = (io->win[1].len > io->win[0].len);
-		p_dev->io.BasePort2 = io->win[1-i].base;
-		p_dev->io.NumPorts2 = io->win[1-i].len;
+		p_dev->resource[1]->start = io->win[1-i].base;
+		p_dev->resource[1]->end = io->win[1-i].len;
 	} else {
-		i = p_dev->io.NumPorts2 = 0;
+		i = p_dev->resource[1]->end = 0;
 	}
 
 	*has_shmem = ((cfg->mem.nwin == 1) &&
 		      (cfg->mem.win[0].len >= 0x4000));
-	p_dev->io.BasePort1 = io->win[i].base;
-	p_dev->io.NumPorts1 = io->win[i].len;
-	p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-	if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+	p_dev->resource[0]->start = io->win[i].base;
+	p_dev->resource[0]->end = io->win[i].len;
+	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
 		return try_io_port(p_dev);
 
 	return 0;
@@ -557,7 +553,7 @@ static int pcnet_config(struct pcmcia_device *link)
     if (!link->irq)
 	    goto failed;
 
-    if (link->io.NumPorts2 == 8) {
+    if (resource_size(link->resource[1]) == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
@@ -569,7 +565,7 @@ static int pcnet_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
     if (info->flags & HAS_MISC_REG) {
 	if ((if_port == 1) || (if_port == 2))
 	    dev->if_port = if_port;
@@ -956,7 +952,7 @@ static int pcnet_open(struct net_device *dev)
     set_misc_reg(dev);
 
     outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */
-    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
+    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev->name, dev);
     if (ret)
 	    return ret;
 
@@ -1464,7 +1460,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
     win_req_t req;
-    memreq_t mem;
     int i, window_size, offset, ret;
 
     window_size = (stop_pg - start_pg) << 8;
@@ -1483,11 +1478,9 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
     if (ret)
 	    goto failed;
 
-    mem.CardOffset = (start_pg << 8) + cm_offset;
-    offset = mem.CardOffset % window_size;
-    mem.CardOffset -= offset;
-    mem.Page = 0;
-    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    offset = (start_pg << 8) + cm_offset;
+    offset -= offset % window_size;
+    ret = pcmcia_map_mem_page(link, link->win, offset);
     if (ret)
 	    goto failed;
 
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 307cd1721e9..377367d03b4 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -44,7 +44,6 @@
 #include <linux/jiffies.h>
 #include <linux/firmware.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -325,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link)
     link->priv = dev;
 
     spin_lock_init(&smc->lock);
-    link->io.NumPorts1 = 16;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 4;
+    link->resource[0]->end = 16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -428,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
 				void *priv_data)
 {
 	int k;
-	p_dev->io.BasePort2 = cf->io.win[0].base;
+	p_dev->resource[1]->start = cf->io.win[0].base;
 	for (k = 0; k < 0x400; k += 0x10) {
 		if (k & 0x80)
 			continue;
-		p_dev->io.BasePort1 = k ^ 0x300;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = k ^ 0x300;
+		p_dev->io_lines = 16;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -444,21 +443,20 @@ static int mhz_mfc_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     win_req_t req;
-    memreq_t mem;
+    unsigned int offset;
     int i;
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->io.IOAddrLines = 16;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts2 = 8;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[1]->end = 8;
 
     /* The Megahertz combo cards have modem-like CIS entries, so
        we have to explicitly try a bunch of port combinations. */
     if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
 	    return -ENODEV;
 
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     /* Allocate a memory window, for accessing the ISR */
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
@@ -469,11 +467,8 @@ static int mhz_mfc_config(struct pcmcia_device *link)
 	    return -ENODEV;
 
     smc->base = ioremap(req.Base, req.Size);
-    mem.CardOffset = mem.Page = 0;
-    if (smc->manfid == MANFID_MOTOROLA)
-	mem.CardOffset = link->conf.ConfigBase;
-    i = pcmcia_map_mem_page(link, link->win, &mem);
-
+    offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0;
+    i = pcmcia_map_mem_page(link, link->win, offset);
     if ((i == 0) &&
 	(smc->manfid == MANFID_MEGAHERTZ) &&
 	(smc->cardid == PRODID_MEGAHERTZ_EM3288))
@@ -546,7 +541,7 @@ static void mot_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
     unsigned int ioaddr = dev->base_addr;
-    unsigned int iouart = link->io.BasePort2;
+    unsigned int iouart = link->resource[1]->start;
 
     /* Set UART base address and force map with COR bit 1 */
     writeb(iouart & 0xff,        smc->base + MOT_UART + CISREG_IOBASE_0);
@@ -602,9 +597,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev,
 			   unsigned int vcc,
 			   void *priv_data)
 {
-	p_dev->io.BasePort1 = cf->io.win[0].base;
-	p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->resource[0]->start = cf->io.win[0].base;
+	p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+	return pcmcia_request_io(p_dev);
 }
 
 static int smc_config(struct pcmcia_device *link)
@@ -612,10 +607,10 @@ static int smc_config(struct pcmcia_device *link)
     struct net_device *dev = link->priv;
     int i;
 
-    link->io.NumPorts1 = 16;
+    link->resource[0]->end = 16;
     i = pcmcia_loop_config(link, smc_configcheck, NULL);
     if (!i)
-	    dev->base_addr = link->io.BasePort1;
+	    dev->base_addr = link->resource[0]->start;
 
     return i;
 }
@@ -647,27 +642,27 @@ static int osi_config(struct pcmcia_device *link)
 
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
-    link->io.NumPorts1 = 64;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-    link->io.NumPorts2 = 8;
-    link->io.IOAddrLines = 16;
+    link->resource[0]->end = 64;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[1]->end = 8;
 
     /* Enable Hard Decode, LAN, Modem */
     link->conf.ConfigIndex = 0x23;
+    link->io_lines = 16;
 
     for (i = j = 0; j < 4; j++) {
-	link->io.BasePort2 = com[j];
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[1]->start = com[j];
+	i = pcmcia_request_io(link);
 	if (i == 0)
 		break;
     }
     if (i != 0) {
 	/* Fallback: turn off hard decode */
 	link->conf.ConfigIndex = 0x03;
-	link->io.NumPorts2 = 0;
-	i = pcmcia_request_io(link, &link->io);
+	link->resource[1]->end = 0;
+	i = pcmcia_request_io(link);
     }
-    dev->base_addr = link->io.BasePort1 + 0x10;
+    dev->base_addr = link->resource[0]->start + 0x10;
     return i;
 }
 
@@ -684,7 +679,7 @@ static int osi_load_firmware(struct pcmcia_device *link)
 
 	/* Download the Seven of Diamonds firmware */
 	for (i = 0; i < fw->size; i++) {
-	    outb(fw->data[i], link->io.BasePort1 + 2);
+	    outb(fw->data[i], link->resource[0]->start + 2);
 	    udelay(50);
 	}
 	release_firmware(fw);
@@ -726,12 +721,12 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
 		return rc;
     } else if (manfid == MANFID_OSITECH) {
 	/* Make sure both functions are powered up */
-	set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
+	set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR);
 	/* Now, turn on the interrupt for both card functions */
-	set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
+	set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR);
 	dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
-	      inw(link->io.BasePort1 + OSITECH_AUI_PWR),
-	      inw(link->io.BasePort1 + OSITECH_RESET_ISR));
+	      inw(link->resource[0]->start + OSITECH_AUI_PWR),
+	      inw(link->resource[0]->start + OSITECH_RESET_ISR));
     }
     return 0;
 }
@@ -804,7 +799,7 @@ static int check_sig(struct pcmcia_device *link)
     }
 
     /* Try setting bus width */
-    width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO);
+    width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO);
     s = inb(ioaddr + CONFIG);
     if (width)
 	s |= CFG_16BIT;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index b6c3644888c..4eb6f986703 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -82,7 +82,6 @@
 #include <linux/bitops.h>
 #include <linux/mii.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -678,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev,
 
 	if (cf->io.nwin > 0  &&  (cf->io.win[0].base & 0xf) == 8) {
 		for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-			p_dev->io.BasePort2 = cf->io.win[0].base;
-			p_dev->io.BasePort1 = ioaddr;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[1]->start = cf->io.win[0].base;
+			p_dev->resource[0]->start = ioaddr;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
@@ -697,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev,
 	int *pass = priv_data;
 
 	if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
-		p_dev->io.BasePort2 = cf->io.win[0].base;
-		p_dev->io.BasePort1 = p_dev->io.BasePort2
+		p_dev->resource[1]->start = cf->io.win[0].base;
+		p_dev->resource[0]->start = p_dev->resource[1]->start
 			+ (*pass ? (cf->index & 0x20 ? -24:8)
 			   : (cf->index & 0x20 ?   8:-24));
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -808,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link)
 	goto failure;
     }
 
-    link->io.IOAddrLines =10;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
     if (local->modem) {
 	int pass;
 
@@ -817,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link)
 	    link->conf.Attributes |= CONF_ENABLE_SPKR;
 	    link->conf.Status |= CCSR_AUDIO_ENA;
 	}
-	link->io.NumPorts2 = 8;
-	link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+	link->resource[1]->end = 8;
+	link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	if (local->dingo) {
 	    /* Take the Modem IO port from the CIS and scan for a free
 	     * Ethernet port */
-	    link->io.NumPorts1 = 16; /* no Mako stuff anymore */
+	    link->resource[0]->end = 16; /* no Mako stuff anymore */
 	    if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
 		    goto port_found;
 	} else {
-	    link->io.NumPorts1 = 18;
+	    link->resource[0]->end = 18;
 	    /* We do 2 passes here: The first one uses the regular mapping and
 	     * the second tries again, thereby considering that the 32 ports are
 	     * mirrored every 32 bytes. Actually we use a mirrored port for
@@ -841,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link)
 	}
 	printk(KNOT_XIRC "no ports available\n");
     } else {
-	link->io.NumPorts1 = 16;
+	link->io_lines = 10;
+	link->resource[0]->end = 16;
 	for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
-	    link->io.BasePort1 = ioaddr;
-	    if (!(err=pcmcia_request_io(link, &link->io)))
+	    link->resource[0]->start = ioaddr;
+	    if (!(err = pcmcia_request_io(link)))
 		goto port_found;
 	}
-	link->io.BasePort1 = 0; /* let CS decide */
-	if ((err=pcmcia_request_io(link, &link->io)))
+	link->resource[0]->start = 0; /* let CS decide */
+	if ((err = pcmcia_request_io(link)))
 	    goto config_error;
     }
   port_found:
@@ -870,24 +869,21 @@ xirc2ps_config(struct pcmcia_device * link)
 	goto config_error;
 
     if (local->dingo) {
-	conf_reg_t reg;
 	win_req_t req;
-	memreq_t mem;
 
 	/* Reset the modem's BAR to the correct value
 	 * This is necessary because in the RequestConfiguration call,
 	 * the base address of the ethernet port (BasePort1) is written
 	 * to the BAR registers of the modem.
 	 */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_IOBASE_0;
-	reg.Value = link->io.BasePort2 & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg)))
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
+				link->resource[1]->start & 0xff);
+	if (err)
 	    goto config_error;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_IOBASE_1;
-	reg.Value = (link->io.BasePort2 >> 8) & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg)))
+
+	err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
+				(link->resource[1]->start >> 8) & 0xff);
+	if (err)
 	    goto config_error;
 
 	/* There is no config entry for the Ethernet part which
@@ -901,16 +897,14 @@ xirc2ps_config(struct pcmcia_device * link)
 	    goto config_error;
 
 	local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
-	mem.CardOffset = 0x0;
-	mem.Page = 0;
-	if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
+	if ((err = pcmcia_map_mem_page(link, link->win, 0)))
 	    goto config_error;
 
 	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
 	 * part.
 	 */
 	writeb(0x47, local->dingo_ccr + CISREG_COR);
-	ioaddr = link->io.BasePort1;
+	ioaddr = link->resource[0]->start;
 	writeb(ioaddr & 0xff	  , local->dingo_ccr + CISREG_IOBASE_0);
 	writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
 
@@ -957,7 +951,7 @@ xirc2ps_config(struct pcmcia_device * link)
 
     /* we can now register the device with the net subsystem */
     dev->irq = link->irq;
-    dev->base_addr = link->io.BasePort1;
+    dev->base_addr = link->resource[0]->start;
 
     if (local->dingo)
 	do_reset(dev, 1); /* a kludge to make the cem56 work */
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 6c2e8fa0ca3..af50a530dae 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -108,9 +108,9 @@ static void ppp_async_process(unsigned long arg);
 static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
 			   int len, int inbound);
 
-static struct ppp_channel_ops async_ops = {
-	ppp_async_send,
-	ppp_async_ioctl
+static const struct ppp_channel_ops async_ops = {
+	.start_xmit = ppp_async_send,
+	.ioctl      = ppp_async_ioctl,
 };
 
 /*
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index 52938da1e54..4c95ec3fb8d 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -97,9 +97,9 @@ static void ppp_sync_flush_output(struct syncppp *ap);
 static void ppp_sync_input(struct syncppp *ap, const unsigned char *buf,
 			   char *flags, int count);
 
-static struct ppp_channel_ops sync_ops = {
-	ppp_sync_send,
-	ppp_sync_ioctl
+static const struct ppp_channel_ops sync_ops = {
+	.start_xmit = ppp_sync_send,
+	.ioctl      = ppp_sync_ioctl,
 };
 
 /*
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 344ef330e12..c07de359dc0 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -92,7 +92,7 @@
 static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb);
 
 static const struct proto_ops pppoe_ops;
-static struct ppp_channel_ops pppoe_chan_ops;
+static const struct ppp_channel_ops pppoe_chan_ops;
 
 /* per-net private data for this module */
 static int pppoe_net_id __read_mostly;
@@ -963,7 +963,7 @@ static int pppoe_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	return __pppoe_xmit(sk, skb);
 }
 
-static struct ppp_channel_ops pppoe_chan_ops = {
+static const struct ppp_channel_ops pppoe_chan_ops = {
 	.start_xmit = pppoe_xmit,
 };
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 35540411990..078bbf4e6f1 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3219,11 +3219,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
 
-	if (pci_dev_run_wake(pdev)) {
-		pm_runtime_set_active(&pdev->dev);
-		pm_runtime_enable(&pdev->dev);
-	}
-	pm_runtime_idle(&pdev->dev);
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_put_noidle(&pdev->dev);
 
 out:
 	return rc;
@@ -3246,17 +3243,12 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	pm_runtime_get_sync(&pdev->dev);
-
 	flush_scheduled_work();
 
 	unregister_netdev(dev);
 
-	if (pci_dev_run_wake(pdev)) {
-		pm_runtime_disable(&pdev->dev);
-		pm_runtime_set_suspended(&pdev->dev);
-	}
-	pm_runtime_put_noidle(&pdev->dev);
+	if (pci_dev_run_wake(pdev))
+		pm_runtime_get_noresume(&pdev->dev);
 
 	/* restore original MAC address */
 	rtl_rar_set(tp, dev->perm_addr);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 8d2772cc42f..ee747919a76 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -83,43 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 	}
 }
 
-#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
-
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-#define SMC_IO_SHIFT		0
-
-#define SMC_inw(a, r)		in_be16((volatile u16 *)((a) + (r)))
-#define SMC_outw(v, a, r)	out_be16((volatile u16 *)((a) + (r)), v)
-#define SMC_insw(a, r, p, l) 						\
-	do {								\
-		unsigned long __port = (a) + (r);			\
-		u16 *__p = (u16 *)(p);					\
-		int __l = (l);						\
-		insw(__port, __p, __l);					\
-		while (__l > 0) {					\
-			*__p = swab16(*__p);				\
-			__p++;						\
-			__l--;						\
-		}							\
-	} while (0)
-#define SMC_outsw(a, r, p, l) 						\
-	do {								\
-		unsigned long __port = (a) + (r);			\
-		u16 *__p = (u16 *)(p);					\
-		int __l = (l);						\
-		while (__l > 0) {					\
-			/* Believe it or not, the swab isn't needed. */	\
-			outw( /* swab16 */ (*__p++), __port);		\
-			__l--;						\
-		}							\
-	} while (0)
-#define SMC_IRQ_FLAGS		(0)
-
 #elif defined(CONFIG_SA1100_PLEB)
 /* We can only do 16-bit reads and writes in the static memory space. */
 #define SMC_CAN_USE_8BIT	1
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 367e96f317d..09c071bd6ad 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -1201,7 +1201,7 @@ static int __devinit bigmac_ether_init(struct of_device *op,
 	dev->watchdog_timeo = 5*HZ;
 
 	/* Finish net device registration. */
-	dev->irq = bp->bigmac_op->irqs[0];
+	dev->irq = bp->bigmac_op->archdata.irqs[0];
 	dev->dma = 0;
 
 	if (register_netdev(dev)) {
@@ -1301,12 +1301,12 @@ static struct of_platform_driver bigmac_sbus_driver = {
 
 static int __init bigmac_init(void)
 {
-	return of_register_driver(&bigmac_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&bigmac_sbus_driver);
 }
 
 static void __exit bigmac_exit(void)
 {
-	of_unregister_driver(&bigmac_sbus_driver);
+	of_unregister_platform_driver(&bigmac_sbus_driver);
 }
 
 module_init(bigmac_init);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 3d9650b8d38..eec443f6407 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2561,7 +2561,7 @@ static int __init quattro_sbus_register_irqs(void)
 		if (skip)
 			continue;
 
-		err = request_irq(op->irqs[0],
+		err = request_irq(op->archdata.irqs[0],
 				  quattro_sbus_interrupt,
 				  IRQF_SHARED, "Quattro",
 				  qp);
@@ -2590,7 +2590,7 @@ static void quattro_sbus_free_irqs(void)
 		if (skip)
 			continue;
 
-		free_irq(op->irqs[0], qp);
+		free_irq(op->archdata.irqs[0], qp);
 	}
 }
 #endif /* CONFIG_SBUS */
@@ -2790,7 +2790,7 @@ static int __devinit happy_meal_sbus_probe_one(struct of_device *op, int is_qfe)
 	/* Happy Meal can do it all... */
 	dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
 
-	dev->irq = op->irqs[0];
+	dev->irq = op->archdata.irqs[0];
 
 #if defined(CONFIG_SBUS) && defined(CONFIG_PCI)
 	/* Hook up SBUS register/descriptor accessors. */
@@ -3304,7 +3304,7 @@ static int __init happy_meal_sbus_init(void)
 {
 	int err;
 
-	err = of_register_driver(&hme_sbus_driver, &of_bus_type);
+	err = of_register_platform_driver(&hme_sbus_driver);
 	if (!err)
 		err = quattro_sbus_register_irqs();
 
@@ -3313,7 +3313,7 @@ static int __init happy_meal_sbus_init(void)
 
 static void happy_meal_sbus_exit(void)
 {
-	of_unregister_driver(&hme_sbus_driver);
+	of_unregister_platform_driver(&hme_sbus_driver);
 	quattro_sbus_free_irqs();
 
 	while (qfe_sbus_list) {
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 7d9c33dd9d1..ee364fa7563 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1474,7 +1474,7 @@ no_link_test:
 	dev->ethtool_ops = &sparc_lance_ethtool_ops;
 	dev->netdev_ops = &sparc_lance_ops;
 
-	dev->irq = op->irqs[0];
+	dev->irq = op->archdata.irqs[0];
 
 	/* We cannot sleep if the chip is busy during a
 	 * multicast list update event, because such events
@@ -1558,12 +1558,12 @@ static struct of_platform_driver sunlance_sbus_driver = {
 /* Find all the lance cards on the system and initialize them */
 static int __init sparc_lance_init(void)
 {
-	return of_register_driver(&sunlance_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&sunlance_sbus_driver);
 }
 
 static void __exit sparc_lance_exit(void)
 {
-	of_unregister_driver(&sunlance_sbus_driver);
+	of_unregister_platform_driver(&sunlance_sbus_driver);
 }
 
 module_init(sparc_lance_init);
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index 72b579c8d81..5f84a5daded 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -803,7 +803,7 @@ static struct sunqec * __devinit get_qec(struct of_device *child)
 
 			qec_init_once(qecp, op);
 
-			if (request_irq(op->irqs[0], qec_interrupt,
+			if (request_irq(op->archdata.irqs[0], qec_interrupt,
 					IRQF_SHARED, "qec", (void *) qecp)) {
 				printk(KERN_ERR "qec: Can't register irq.\n");
 				goto fail;
@@ -901,7 +901,7 @@ static int __devinit qec_ether_init(struct of_device *op)
 	SET_NETDEV_DEV(dev, &op->dev);
 
 	dev->watchdog_timeo = 5*HZ;
-	dev->irq = op->irqs[0];
+	dev->irq = op->archdata.irqs[0];
 	dev->dma = 0;
 	dev->ethtool_ops = &qe_ethtool_ops;
 	dev->netdev_ops = &qec_ops;
@@ -988,18 +988,18 @@ static struct of_platform_driver qec_sbus_driver = {
 
 static int __init qec_init(void)
 {
-	return of_register_driver(&qec_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&qec_sbus_driver);
 }
 
 static void __exit qec_exit(void)
 {
-	of_unregister_driver(&qec_sbus_driver);
+	of_unregister_platform_driver(&qec_sbus_driver);
 
 	while (root_qec_dev) {
 		struct sunqec *next = root_qec_dev->next_module;
 		struct of_device *op = root_qec_dev->op;
 
-		free_irq(op->irqs[0], (void *) root_qec_dev);
+		free_irq(op->archdata.irqs[0], (void *) root_qec_dev);
 		of_iounmap(&op->resource[0], root_qec_dev->gregs,
 			   GLOB_REG_SIZE);
 		kfree(root_qec_dev);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 3b03794ac3f..7f62e2dea28 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1457,7 +1457,6 @@ int usbnet_resume (struct usb_interface *intf)
 		spin_lock_irq(&dev->txq.lock);
 		while ((res = usb_get_from_anchor(&dev->deferred))) {
 
-			printk(KERN_INFO"%s has delayed data\n", __func__);
 			skb = (struct sk_buff *)res->context;
 			retval = usb_submit_urb(res, GFP_ATOMIC);
 			if (retval < 0) {
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 42dffd3e579..fd69095ef6e 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2763,12 +2763,12 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 
 	vptr->dev = dev;
 
-	dev->irq = pdev->irq;
-
 	ret = pci_enable_device(pdev);
 	if (ret < 0)
 		goto err_free_dev;
 
+	dev->irq = pdev->irq;
+
 	ret = velocity_get_pci_info(vptr, pdev);
 	if (ret < 0) {
 		/* error message already printed */
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bb6b67f6b0c..4598e9d2608 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -705,6 +705,19 @@ static int virtnet_close(struct net_device *dev)
 	return 0;
 }
 
+static void virtnet_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *drvinfo)
+{
+	struct virtnet_info *vi = netdev_priv(dev);
+	struct virtio_device *vdev = vi->vdev;
+
+	strncpy(drvinfo->driver, KBUILD_MODNAME, ARRAY_SIZE(drvinfo->driver));
+	strncpy(drvinfo->version, "N/A", ARRAY_SIZE(drvinfo->version));
+	strncpy(drvinfo->fw_version, "N/A", ARRAY_SIZE(drvinfo->fw_version));
+	strncpy(drvinfo->bus_info, dev_name(&vdev->dev),
+		ARRAY_SIZE(drvinfo->bus_info));
+}
+
 static int virtnet_set_tx_csum(struct net_device *dev, u32 data)
 {
 	struct virtnet_info *vi = netdev_priv(dev);
@@ -817,6 +830,7 @@ static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
 }
 
 static const struct ethtool_ops virtnet_ethtool_ops = {
+	.get_drvinfo = virtnet_get_drvinfo,
 	.set_tx_csum = virtnet_set_tx_csum,
 	.set_sg = ethtool_op_set_sg,
 	.set_tso = ethtool_op_set_tso,
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 33bdc6a84e8..9a121a5b787 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -155,8 +154,6 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -176,52 +173,25 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+	if (pcmcia_request_io(p_dev) != 0)
 		return -ENODEV;
 
-	/*
-	  Now set up a common memory window, if needed.  There is room
-	  in the struct pcmcia_device structure for one memory window handle,
-	  but if the base addresses need to be saved, or if multiple
-	  windows are needed, the info should go in the private data
-	  structure for this device.
-
-	  Note that the memory window base is a physical address, and
-	  needs to be mapped to virtual space with ioremap() before it
-	  is used.
-	*/
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		memreq_t map;
-		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -230,17 +200,12 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 static int airo_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	win_req_t *req;
 	int ret;
 
 	dev = link->priv;
 
 	dev_dbg(&link->dev, "airo_config\n");
 
-	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
-	if (!req)
-		return -ENOMEM;
-
 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
@@ -255,7 +220,7 @@ static int airo_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+	ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
 	if (ret)
 		goto failed;
 
@@ -272,7 +237,7 @@ static int airo_config(struct pcmcia_device *link)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
 		init_airo_card(link->irq,
-			       link->io.BasePort1, 1, &link->dev);
+			       link->resource[0]->start, 1, &link->dev);
 	if (!((local_info_t *)link->priv)->eth_dev)
 		goto failed;
 
@@ -282,22 +247,15 @@ static int airo_config(struct pcmcia_device *link)
 	if (link->conf.Vpp)
 		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
 	printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1+link->io.NumPorts1-1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2+link->io.NumPorts2-1);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req->Base,
-		       req->Base+req->Size-1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
-	kfree(req);
 	return 0;
 
  failed:
 	airo_release(link);
-	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index dabafb874c3..fe7418aefc4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -63,6 +63,7 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah,
 				      u8 rxchainmask,
 				      struct ath9k_cal_list *currCal)
 {
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	bool iscaldone = false;
 
 	if (currCal->calState == CAL_RUNNING) {
@@ -81,14 +82,14 @@ static bool ar9002_hw_per_calibration(struct ath_hw *ah,
 				}
 
 				currCal->calData->calPostProc(ah, numChains);
-				ichan->CalValid |= currCal->calData->calType;
+				caldata->CalValid |= currCal->calData->calType;
 				currCal->calState = CAL_DONE;
 				iscaldone = true;
 			} else {
 				ar9002_hw_setup_calibration(ah, currCal);
 			}
 		}
-	} else if (!(ichan->CalValid & currCal->calData->calType)) {
+	} else if (!(caldata->CalValid & currCal->calData->calType)) {
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
 
@@ -686,8 +687,13 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
 {
 	bool iscaldone = true;
 	struct ath9k_cal_list *currCal = ah->cal_list_curr;
+	bool nfcal, nfcal_pending = false;
 
-	if (currCal &&
+	nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF);
+	if (ah->caldata)
+		nfcal_pending = ah->caldata->nfcal_pending;
+
+	if (currCal && !nfcal &&
 	    (currCal->calState == CAL_RUNNING ||
 	     currCal->calState == CAL_WAITING)) {
 		iscaldone = ar9002_hw_per_calibration(ah, chan,
@@ -703,7 +709,7 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
 	}
 
 	/* Do NF cal only at longer intervals */
-	if (longcal) {
+	if (longcal || nfcal_pending) {
 		/* Do periodic PAOffset Cal */
 		ar9002_hw_pa_cal(ah, false);
 		ar9002_hw_olc_temp_compensation(ah);
@@ -712,16 +718,18 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah,
 		 * Get the value from the previous NF cal and update
 		 * history buffer.
 		 */
-		ath9k_hw_getnf(ah, chan);
-
-		/*
-		 * Load the NF from history buffer of the current channel.
-		 * NF is slow time-variant, so it is OK to use a historical
-		 * value.
-		 */
-		ath9k_hw_loadnf(ah, ah->curchan);
+		if (ath9k_hw_getnf(ah, chan)) {
+			/*
+			 * Load the NF from history buffer of the current
+			 * channel.
+			 * NF is slow time-variant, so it is OK to use a
+			 * historical value.
+			 */
+			ath9k_hw_loadnf(ah, ah->curchan);
+		}
 
-		ath9k_hw_start_nfcal(ah);
+		if (longcal)
+			ath9k_hw_start_nfcal(ah, false);
 	}
 
 	return iscaldone;
@@ -869,8 +877,10 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 	ar9002_hw_pa_cal(ah, true);
 
 	/* Do NF Calibration after DC offset and other calibrations */
-	REG_WRITE(ah, AR_PHY_AGC_CONTROL,
-		  REG_READ(ah, AR_PHY_AGC_CONTROL) | AR_PHY_AGC_CONTROL_NF);
+	ath9k_hw_start_nfcal(ah, true);
+
+	if (ah->caldata)
+		ah->caldata->nfcal_pending = true;
 
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 
@@ -901,7 +911,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 			ath9k_hw_reset_calibration(ah, ah->cal_list_curr);
 	}
 
-	chan->CalValid = 0;
+	if (ah->caldata)
+		ah->caldata->CalValid = 0;
 
 	return true;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 5a065039913..4674ea8c9c9 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -68,6 +68,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 				      u8 rxchainmask,
 				      struct ath9k_cal_list *currCal)
 {
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	/* Cal is assumed not done until explicitly set below */
 	bool iscaldone = false;
 
@@ -95,7 +96,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 				currCal->calData->calPostProc(ah, numChains);
 
 				/* Calibration has finished. */
-				ichan->CalValid |= currCal->calData->calType;
+				caldata->CalValid |= currCal->calData->calType;
 				currCal->calState = CAL_DONE;
 				iscaldone = true;
 			} else {
@@ -106,7 +107,7 @@ static bool ar9003_hw_per_calibration(struct ath_hw *ah,
 			ar9003_hw_setup_calibration(ah, currCal);
 			}
 		}
-	} else if (!(ichan->CalValid & currCal->calData->calType)) {
+	} else if (!(caldata->CalValid & currCal->calData->calType)) {
 		/* If current cal is marked invalid in channel, kick it off */
 		ath9k_hw_reset_calibration(ah, currCal);
 	}
@@ -149,6 +150,12 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah,
 	/* Do NF cal only at longer intervals */
 	if (longcal) {
 		/*
+		 * Get the value from the previous NF cal and update
+		 * history buffer.
+		 */
+		ath9k_hw_getnf(ah, chan);
+
+		/*
 		 * Load the NF from history buffer of the current channel.
 		 * NF is slow time-variant, so it is OK to use a historical
 		 * value.
@@ -156,7 +163,7 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah,
 		ath9k_hw_loadnf(ah, ah->curchan);
 
 		/* start NF calibration, without updating BB NF register */
-		ath9k_hw_start_nfcal(ah);
+		ath9k_hw_start_nfcal(ah, false);
 	}
 
 	return iscaldone;
@@ -762,6 +769,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 	/* Revert chainmasks to their original values before NF cal */
 	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
 
+	ath9k_hw_start_nfcal(ah, true);
+
 	/* Initialize list pointers */
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 
@@ -785,7 +794,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 	if (ah->cal_list_curr)
 		ath9k_hw_reset_calibration(ah, ah->cal_list_curr);
 
-	chan->CalValid = 0;
+	if (ah->caldata)
+		ah->caldata->CalValid = 0;
 
 	return true;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index ace8d2678b1..b883b174385 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -41,6 +41,20 @@
 #define LE16(x) __constant_cpu_to_le16(x)
 #define LE32(x) __constant_cpu_to_le32(x)
 
+/* Local defines to distinguish between extension and control CTL's */
+#define EXT_ADDITIVE (0x8000)
+#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE)
+#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE)
+#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE)
+#define REDUCE_SCALED_POWER_BY_TWO_CHAIN     6  /* 10*log10(2)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN   9  /* 10*log10(3)*2 */
+#define PWRINCR_3_TO_1_CHAIN      9             /* 10*log(3)*2 */
+#define PWRINCR_3_TO_2_CHAIN      3             /* floor(10*log(3/2)*2) */
+#define PWRINCR_2_TO_1_CHAIN      6             /* 10*log(2)*2 */
+
+#define SUB_NUM_CTL_MODES_AT_5G_40 2    /* excluding HT40, EXT-OFDM */
+#define SUB_NUM_CTL_MODES_AT_2G_40 3    /* excluding HT40, EXT-OFDM, EXT-CCK */
+
 static const struct ar9300_eeprom ar9300_default = {
 	.eepromVersion = 2,
 	.templateVersion = 2,
@@ -609,6 +623,14 @@ static const struct ar9300_eeprom ar9300_default = {
 	 }
 };
 
+static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
+{
+	if (fbin == AR9300_BCHAN_UNUSED)
+		return fbin;
+
+	return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
+}
+
 static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah)
 {
 	return 0;
@@ -1417,9 +1439,9 @@ static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray)
 #undef POW_SM
 }
 
-static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq)
+static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq,
+					      u8 *targetPowerValT2)
 {
-	u8 targetPowerValT2[ar9300RateSize];
 	/* XXX: hard code for now, need to get from eeprom struct */
 	u8 ht40PowerIncForPdadc = 0;
 	bool is2GHz = false;
@@ -1553,9 +1575,6 @@ static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq)
 			  "TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
 		i++;
 	}
-
-	/* Write target power array to registers */
-	ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
 }
 
 static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
@@ -1799,14 +1818,369 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
 	return 0;
 }
 
+static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
+					   int idx,
+					   int edge,
+					   bool is2GHz)
+{
+	struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
+	struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
+
+	if (is2GHz)
+		return ctl_2g[idx].ctlEdges[edge].tPower;
+	else
+		return ctl_5g[idx].ctlEdges[edge].tPower;
+}
+
+static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
+					     int idx,
+					     unsigned int edge,
+					     u16 freq,
+					     bool is2GHz)
+{
+	struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G;
+	struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
+
+	u8 *ctl_freqbin = is2GHz ?
+		&eep->ctl_freqbin_2G[idx][0] :
+		&eep->ctl_freqbin_5G[idx][0];
+
+	if (is2GHz) {
+		if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
+		    ctl_2g[idx].ctlEdges[edge - 1].flag)
+			return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+	} else {
+		if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
+		    ctl_5g[idx].ctlEdges[edge - 1].flag)
+			return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+	}
+
+	return AR9300_MAX_RATE_POWER;
+}
+
+/*
+ * Find the maximum conformance test limit for the given channel and CTL info
+ */
+static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
+					u16 freq, int idx, bool is2GHz)
+{
+	u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+	u8 *ctl_freqbin = is2GHz ?
+		&eep->ctl_freqbin_2G[idx][0] :
+		&eep->ctl_freqbin_5G[idx][0];
+	u16 num_edges = is2GHz ?
+		AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G;
+	unsigned int edge;
+
+	/* Get the edge power */
+	for (edge = 0;
+	     (edge < num_edges) && (ctl_freqbin[edge] != AR9300_BCHAN_UNUSED);
+	     edge++) {
+		/*
+		 * If there's an exact channel match or an inband flag set
+		 * on the lower channel use the given rdEdgePower
+		 */
+		if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) {
+			twiceMaxEdgePower =
+				ar9003_hw_get_direct_edge_power(eep, idx,
+								edge, is2GHz);
+			break;
+		} else if ((edge > 0) &&
+			   (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge],
+						      is2GHz))) {
+			twiceMaxEdgePower =
+				ar9003_hw_get_indirect_edge_power(eep, idx,
+								  edge, freq,
+								  is2GHz);
+			/*
+			 * Leave loop - no more affecting edges possible in
+			 * this monotonic increasing list
+			 */
+			break;
+		}
+	}
+	return twiceMaxEdgePower;
+}
+
+static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
+					       struct ath9k_channel *chan,
+					       u8 *pPwrArray, u16 cfgCtl,
+					       u8 twiceAntennaReduction,
+					       u8 twiceMaxRegulatoryPower,
+					       u16 powerLimit)
+{
+	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
+	u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+	static const u16 tpScaleReductionTable[5] = {
+		0, 3, 6, 9, AR9300_MAX_RATE_POWER
+	};
+	int i;
+	int16_t  twiceLargestAntenna;
+	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
+	u16 ctlModesFor11a[] = {
+		CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
+	};
+	u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT,
+		CTL_11G_EXT, CTL_2GHT40
+	};
+	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	struct chan_centers centers;
+	u8 *ctlIndex;
+	u8 ctlNum;
+	u16 twiceMinEdgePower;
+	bool is2ghz = IS_CHAN_2GHZ(chan);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	/* Compute TxPower reduction due to Antenna Gain */
+	if (is2ghz)
+		twiceLargestAntenna = pEepData->modalHeader2G.antennaGain;
+	else
+		twiceLargestAntenna = pEepData->modalHeader5G.antennaGain;
+
+	twiceLargestAntenna = (int16_t)min((twiceAntennaReduction) -
+				twiceLargestAntenna, 0);
+
+	/*
+	 * scaledPower is the minimum of the user input power level
+	 * and the regulatory allowed power level
+	 */
+	maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna;
+
+	if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) {
+		maxRegAllowedPower -=
+			(tpScaleReductionTable[(regulatory->tp_scale)] * 2);
+	}
+
+	scaledPower = min(powerLimit, maxRegAllowedPower);
+
+	/*
+	 * Reduce scaled Power by number of chains active to get
+	 * to per chain tx power level
+	 */
+	switch (ar5416_get_ntxchains(ah->txchainmask)) {
+	case 1:
+		break;
+	case 2:
+		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		break;
+	case 3:
+		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		break;
+	}
+
+	scaledPower = max((u16)0, scaledPower);
+
+	/*
+	 * Get target powers from EEPROM - our baseline for TX Power
+	 */
+	if (is2ghz) {
+		/* Setup for CTL modes */
+		/* CTL_11B, CTL_11G, CTL_2GHT20 */
+		numCtlModes =
+			ARRAY_SIZE(ctlModesFor11g) -
+				   SUB_NUM_CTL_MODES_AT_2G_40;
+		pCtlMode = ctlModesFor11g;
+		if (IS_CHAN_HT40(chan))
+			/* All 2G CTL's */
+			numCtlModes = ARRAY_SIZE(ctlModesFor11g);
+	} else {
+		/* Setup for CTL modes */
+		/* CTL_11A, CTL_5GHT20 */
+		numCtlModes = ARRAY_SIZE(ctlModesFor11a) -
+					 SUB_NUM_CTL_MODES_AT_5G_40;
+		pCtlMode = ctlModesFor11a;
+		if (IS_CHAN_HT40(chan))
+			/* All 5G CTL's */
+			numCtlModes = ARRAY_SIZE(ctlModesFor11a);
+	}
+
+	/*
+	 * For MIMO, need to apply regulatory caps individually across
+	 * dynamically running modes: CCK, OFDM, HT20, HT40
+	 *
+	 * The outer loop walks through each possible applicable runtime mode.
+	 * The inner loop walks through each ctlIndex entry in EEPROM.
+	 * The ctl value is encoded as [7:4] == test group, [3:0] == test mode.
+	 */
+	for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) {
+		bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) ||
+			(pCtlMode[ctlMode] == CTL_2GHT40);
+		if (isHt40CtlMode)
+			freq = centers.synth_center;
+		else if (pCtlMode[ctlMode] & EXT_ADDITIVE)
+			freq = centers.ext_center;
+		else
+			freq = centers.ctl_center;
+
+		ath_print(common, ATH_DBG_REGULATORY,
+			  "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
+			  "EXT_ADDITIVE %d\n",
+			  ctlMode, numCtlModes, isHt40CtlMode,
+			  (pCtlMode[ctlMode] & EXT_ADDITIVE));
+
+		/* walk through each CTL index stored in EEPROM */
+		if (is2ghz) {
+			ctlIndex = pEepData->ctlIndex_2G;
+			ctlNum = AR9300_NUM_CTLS_2G;
+		} else {
+			ctlIndex = pEepData->ctlIndex_5G;
+			ctlNum = AR9300_NUM_CTLS_5G;
+		}
+
+		for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
+			ath_print(common, ATH_DBG_REGULATORY,
+				  "LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
+				  "pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
+				  "chan %dn",
+				  i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
+				  chan->channel);
+
+				/*
+				 * compare test group from regulatory
+				 * channel list with test mode from pCtlMode
+				 * list
+				 */
+				if ((((cfgCtl & ~CTL_MODE_M) |
+				       (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+					ctlIndex[i]) ||
+				    (((cfgCtl & ~CTL_MODE_M) |
+				       (pCtlMode[ctlMode] & CTL_MODE_M)) ==
+				     ((ctlIndex[i] & CTL_MODE_M) |
+				       SD_NO_CTL))) {
+					twiceMinEdgePower =
+					  ar9003_hw_get_max_edge_power(pEepData,
+								       freq, i,
+								       is2ghz);
+
+					if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL)
+						/*
+						 * Find the minimum of all CTL
+						 * edge powers that apply to
+						 * this channel
+						 */
+						twiceMaxEdgePower =
+							min(twiceMaxEdgePower,
+							    twiceMinEdgePower);
+						else {
+							/* specific */
+							twiceMaxEdgePower =
+							  twiceMinEdgePower;
+							break;
+						}
+				}
+			}
+
+			minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
+
+			ath_print(common, ATH_DBG_REGULATORY,
+				  "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d "
+				  "sP %d minCtlPwr %d\n",
+				  ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+				  scaledPower, minCtlPower);
+
+			/* Apply ctl mode to correct target power set */
+			switch (pCtlMode[ctlMode]) {
+			case CTL_11B:
+				for (i = ALL_TARGET_LEGACY_1L_5L;
+				     i <= ALL_TARGET_LEGACY_11S; i++)
+					pPwrArray[i] =
+					  (u8)min((u16)pPwrArray[i],
+						  minCtlPower);
+				break;
+			case CTL_11A:
+			case CTL_11G:
+				for (i = ALL_TARGET_LEGACY_6_24;
+				     i <= ALL_TARGET_LEGACY_54; i++)
+					pPwrArray[i] =
+					  (u8)min((u16)pPwrArray[i],
+						  minCtlPower);
+				break;
+			case CTL_5GHT20:
+			case CTL_2GHT20:
+				for (i = ALL_TARGET_HT20_0_8_16;
+				     i <= ALL_TARGET_HT20_21; i++)
+					pPwrArray[i] =
+					  (u8)min((u16)pPwrArray[i],
+						  minCtlPower);
+				pPwrArray[ALL_TARGET_HT20_22] =
+				  (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22],
+					  minCtlPower);
+				pPwrArray[ALL_TARGET_HT20_23] =
+				  (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23],
+					   minCtlPower);
+				break;
+			case CTL_5GHT40:
+			case CTL_2GHT40:
+				for (i = ALL_TARGET_HT40_0_8_16;
+				     i <= ALL_TARGET_HT40_23; i++)
+					pPwrArray[i] =
+					  (u8)min((u16)pPwrArray[i],
+						  minCtlPower);
+				break;
+			default:
+			    break;
+			}
+	} /* end ctl mode checking */
+}
+
 static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
 					struct ath9k_channel *chan, u16 cfgCtl,
 					u8 twiceAntennaReduction,
 					u8 twiceMaxRegulatoryPower,
 					u8 powerLimit)
 {
-	ah->txpower_limit = powerLimit;
-	ar9003_hw_set_target_power_eeprom(ah, chan->channel);
+	struct ath_common *common = ath9k_hw_common(ah);
+	u8 targetPowerValT2[ar9300RateSize];
+	unsigned int i = 0;
+
+	ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2);
+	ar9003_hw_set_power_per_rate_table(ah, chan,
+					   targetPowerValT2, cfgCtl,
+					   twiceAntennaReduction,
+					   twiceMaxRegulatoryPower,
+					   powerLimit);
+
+	while (i < ar9300RateSize) {
+		ath_print(common, ATH_DBG_EEPROM,
+			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+		i++;
+		ath_print(common, ATH_DBG_EEPROM,
+			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+		i++;
+		ath_print(common, ATH_DBG_EEPROM,
+			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
+		i++;
+		ath_print(common, ATH_DBG_EEPROM,
+			  "TPC[%02d] 0x%08x\n\n", i, targetPowerValT2[i]);
+		i++;
+	}
+
+	/* Write target power array to registers */
+	ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
+
+	/*
+	 * This is the TX power we send back to driver core,
+	 * and it can use to pass to userspace to display our
+	 * currently configured TX power setting.
+	 *
+	 * Since power is rate dependent, use one of the indices
+	 * from the AR9300_Rates enum to select an entry from
+	 * targetPowerValT2[] to report. Currently returns the
+	 * power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps
+	 * as CCK power is less interesting (?).
+	 */
+	i = ALL_TARGET_LEGACY_6_24; /* legacy */
+	if (IS_CHAN_HT40(chan))
+		i = ALL_TARGET_HT40_0_8_16; /* ht40 */
+	else if (IS_CHAN_HT20(chan))
+		i = ALL_TARGET_HT20_0_8_16; /* ht20 */
+
+	ah->txpower_limit = targetPowerValT2[i];
+
 	ar9003_hw_calibration_apply(ah, chan->channel);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 49e0c865ce5..7c38229ba67 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -577,10 +577,11 @@ static bool create_pa_curve(u32 *data_L, u32 *data_U, u32 *pa_table, u16 *gain)
 }
 
 void ar9003_paprd_populate_single_table(struct ath_hw *ah,
-					struct ath9k_channel *chan, int chain)
+					struct ath9k_hw_cal_data *caldata,
+					int chain)
 {
-	u32 *paprd_table_val = chan->pa_table[chain];
-	u32 small_signal_gain = chan->small_signal_gain[chain];
+	u32 *paprd_table_val = caldata->pa_table[chain];
+	u32 small_signal_gain = caldata->small_signal_gain[chain];
 	u32 training_power;
 	u32 reg = 0;
 	int i;
@@ -654,17 +655,17 @@ int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain)
 }
 EXPORT_SYMBOL(ar9003_paprd_setup_gain_table);
 
-int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_channel *chan,
-			      int chain)
+int ar9003_paprd_create_curve(struct ath_hw *ah,
+			      struct ath9k_hw_cal_data *caldata, int chain)
 {
-	u16 *small_signal_gain = &chan->small_signal_gain[chain];
-	u32 *pa_table = chan->pa_table[chain];
+	u16 *small_signal_gain = &caldata->small_signal_gain[chain];
+	u32 *pa_table = caldata->pa_table[chain];
 	u32 *data_L, *data_U;
 	int i, status = 0;
 	u32 *buf;
 	u32 reg;
 
-	memset(chan->pa_table[chain], 0, sizeof(chan->pa_table[chain]));
+	memset(caldata->pa_table[chain], 0, sizeof(caldata->pa_table[chain]));
 
 	buf = kmalloc(2 * 48 * sizeof(u32), GFP_ATOMIC);
 	if (!buf)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index a753a431bb1..a491854fa38 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -542,7 +542,11 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah,
 		u32 reg = INI_RA(iniArr, i, 0);
 		u32 val = INI_RA(iniArr, i, column);
 
-		REG_WRITE(ah, reg, val);
+		if (reg >= 0x16000 && reg < 0x17000)
+			ath9k_hw_analog_shift_regwrite(ah, reg, val);
+		else
+			REG_WRITE(ah, reg, val);
+
 		DO_DELAY(regWrites);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 998ae2c49ed..07f26ee7a72 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -510,7 +510,7 @@ void ath_deinit_leds(struct ath_softc *sc);
 #define SC_OP_BEACONS                BIT(1)
 #define SC_OP_RXAGGR                 BIT(2)
 #define SC_OP_TXAGGR                 BIT(3)
-#define SC_OP_FULL_RESET             BIT(4)
+#define SC_OP_OFFCHANNEL             BIT(4)
 #define SC_OP_PREAMBLE_SHORT         BIT(5)
 #define SC_OP_PROTECT_ENABLE         BIT(6)
 #define SC_OP_RXFLUSH                BIT(7)
@@ -609,6 +609,7 @@ struct ath_softc {
 struct ath_wiphy {
 	struct ath_softc *sc; /* shared for all virtual wiphys */
 	struct ieee80211_hw *hw;
+	struct ath9k_hw_cal_data caldata;
 	enum ath_wiphy_state {
 		ATH_WIPHY_INACTIVE,
 		ATH_WIPHY_ACTIVE,
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 139289e4e93..45208690c0e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -22,23 +22,6 @@
 /* We can tune this as we go by monitoring really low values */
 #define ATH9K_NF_TOO_LOW	-60
 
-/* AR5416 may return very high value (like -31 dBm), in those cases the nf
- * is incorrect and we should use the static NF value. Later we can try to
- * find out why they are reporting these values */
-
-static bool ath9k_hw_nf_in_range(struct ath_hw *ah, s16 nf)
-{
-	if (nf > ATH9K_NF_TOO_LOW) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-			  "noise floor value detected (%d) is "
-			  "lower than what we think is a "
-			  "reasonable value (%d)\n",
-			  nf, ATH9K_NF_TOO_LOW);
-		return false;
-	}
-	return true;
-}
-
 static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer)
 {
 	int16_t nfval;
@@ -121,6 +104,19 @@ void ath9k_hw_reset_calibration(struct ath_hw *ah,
 	ah->cal_samples = 0;
 }
 
+static s16 ath9k_hw_get_default_nf(struct ath_hw *ah,
+				   struct ath9k_channel *chan)
+{
+	struct ath_nf_limits *limit;
+
+	if (!chan || IS_CHAN_2GHZ(chan))
+		limit = &ah->nf_2g;
+	else
+		limit = &ah->nf_5g;
+
+	return limit->nominal;
+}
+
 /* This is done for the currently configured channel */
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 {
@@ -128,7 +124,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 	struct ieee80211_conf *conf = &common->hw->conf;
 	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
-	if (!ah->curchan)
+	if (!ah->caldata)
 		return true;
 
 	if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah))
@@ -151,37 +147,55 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 		  "Resetting Cal %d state for channel %u\n",
 		  currCal->calData->calType, conf->channel->center_freq);
 
-	ah->curchan->CalValid &= ~currCal->calData->calType;
+	ah->caldata->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;
 
 	return false;
 }
 EXPORT_SYMBOL(ath9k_hw_reset_calvalid);
 
-void ath9k_hw_start_nfcal(struct ath_hw *ah)
+void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update)
 {
+	if (ah->caldata)
+		ah->caldata->nfcal_pending = true;
+
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
 		    AR_PHY_AGC_CONTROL_ENABLE_NF);
-	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
+
+	if (update)
+		REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL,
+		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+	else
+		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL,
 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
+
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
 }
 
 void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	struct ath9k_nfcal_hist *h;
+	struct ath9k_nfcal_hist *h = NULL;
 	unsigned i, j;
 	int32_t val;
 	u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask;
 	struct ath_common *common = ath9k_hw_common(ah);
+	s16 default_nf = ath9k_hw_get_default_nf(ah, chan);
 
-	h = ah->nfCalHist;
+	if (ah->caldata)
+		h = ah->caldata->nfCalHist;
 
 	for (i = 0; i < NUM_NF_READINGS; i++) {
 		if (chainmask & (1 << i)) {
+			s16 nfval;
+
+			if (h)
+				nfval = h[i].privNF;
+			else
+				nfval = default_nf;
+
 			val = REG_READ(ah, ah->nf_regs[i]);
 			val &= 0xFFFFFE00;
-			val |= (((u32) (h[i].privNF) << 1) & 0x1ff);
+			val |= (((u32) nfval << 1) & 0x1ff);
 			REG_WRITE(ah, ah->nf_regs[i], val);
 		}
 	}
@@ -277,22 +291,25 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf)
 	}
 }
 
-int16_t ath9k_hw_getnf(struct ath_hw *ah,
-		       struct ath9k_channel *chan)
+bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	int16_t nf, nfThresh;
 	int16_t nfarray[NUM_NF_READINGS] = { 0 };
 	struct ath9k_nfcal_hist *h;
 	struct ieee80211_channel *c = chan->chan;
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
+
+	if (!caldata)
+		return false;
 
 	chan->channelFlags &= (~CHANNEL_CW_INT);
 	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
 		ath_print(common, ATH_DBG_CALIBRATE,
 			  "NF did not complete in calibration window\n");
 		nf = 0;
-		chan->rawNoiseFloor = nf;
-		return chan->rawNoiseFloor;
+		caldata->rawNoiseFloor = nf;
+		return false;
 	} else {
 		ath9k_hw_do_getnf(ah, nfarray);
 		ath9k_hw_nf_sanitize(ah, nfarray);
@@ -307,47 +324,40 @@ int16_t ath9k_hw_getnf(struct ath_hw *ah,
 		}
 	}
 
-	h = ah->nfCalHist;
-
+	h = caldata->nfCalHist;
+	caldata->nfcal_pending = false;
 	ath9k_hw_update_nfcal_hist_buffer(h, nfarray);
-	chan->rawNoiseFloor = h[0].privNF;
-
-	return chan->rawNoiseFloor;
+	caldata->rawNoiseFloor = h[0].privNF;
+	return true;
 }
 
-void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah)
+void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
+				  struct ath9k_channel *chan)
 {
-	struct ath_nf_limits *limit;
+	struct ath9k_nfcal_hist *h;
+	s16 default_nf;
 	int i, j;
 
-	if (!ah->curchan || IS_CHAN_2GHZ(ah->curchan))
-		limit = &ah->nf_2g;
-	else
-		limit = &ah->nf_5g;
+	if (!ah->caldata)
+		return;
 
+	h = ah->caldata->nfCalHist;
+	default_nf = ath9k_hw_get_default_nf(ah, chan);
 	for (i = 0; i < NUM_NF_READINGS; i++) {
-		ah->nfCalHist[i].currIndex = 0;
-		ah->nfCalHist[i].privNF = limit->nominal;
-		ah->nfCalHist[i].invalidNFcount =
-			AR_PHY_CCA_FILTERWINDOW_LENGTH;
+		h[i].currIndex = 0;
+		h[i].privNF = default_nf;
+		h[i].invalidNFcount = AR_PHY_CCA_FILTERWINDOW_LENGTH;
 		for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) {
-			ah->nfCalHist[i].nfCalBuffer[j] = limit->nominal;
+			h[i].nfCalBuffer[j] = default_nf;
 		}
 	}
 }
 
 s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	s16 nf;
-
-	if (chan->rawNoiseFloor == 0)
-		nf = -96;
-	else
-		nf = chan->rawNoiseFloor;
-
-	if (!ath9k_hw_nf_in_range(ah, nf))
-		nf = ATH_DEFAULT_NOISE_FLOOR;
+	if (!ah->caldata || !ah->caldata->rawNoiseFloor)
+		return ath9k_hw_get_default_nf(ah, chan);
 
-	return nf;
+	return ah->caldata->rawNoiseFloor;
 }
 EXPORT_SYMBOL(ath9k_hw_getchan_noise);
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index cd60d09cdda..0a304b3eeeb 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -108,11 +108,11 @@ struct ath9k_pacal_info{
 };
 
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah);
-void ath9k_hw_start_nfcal(struct ath_hw *ah);
+void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update);
 void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
-int16_t ath9k_hw_getnf(struct ath_hw *ah,
-		       struct ath9k_channel *chan);
-void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah);
+bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
+				  struct ath9k_channel *chan);
 s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan);
 void ath9k_hw_reset_calibration(struct ath_hw *ah,
 				struct ath9k_cal_list *currCal);
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 3756400e6bf..43b9e21bc56 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -353,6 +353,8 @@ struct ath9k_htc_priv {
 	u16 seq_no;
 	u32 bmiss_cnt;
 
+	struct ath9k_hw_cal_data caldata[38];
+
 	spinlock_t beacon_lock;
 
 	bool tx_queues_stop;
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index cf9bcc67ade..ebed9d1691a 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -125,6 +125,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	struct ieee80211_conf *conf = &common->hw->conf;
 	bool fastcc = true;
 	struct ieee80211_channel *channel = hw->conf.channel;
+	struct ath9k_hw_cal_data *caldata;
 	enum htc_phymode mode;
 	__be16 htc_mode;
 	u8 cmd_rsp;
@@ -149,7 +150,8 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 		  priv->ah->curchan->channel,
 		  channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf));
 
-	ret = ath9k_hw_reset(ah, hchan, fastcc);
+	caldata = &priv->caldata[channel->hw_value];
+	ret = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (ret) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset channel (%u Mhz) "
@@ -1028,7 +1030,7 @@ static void ath9k_htc_radio_enable(struct ieee80211_hw *hw)
 		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
 
 	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, false);
+	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (ret) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d "
@@ -1091,7 +1093,7 @@ static void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
 		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
 
 	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, false);
+	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (ret) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d "
@@ -1179,7 +1181,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 	ath9k_hw_configpcipowersave(ah, 0, 0);
 
 	ath9k_hw_htc_resetinit(ah);
-	ret = ath9k_hw_reset(ah, init_channel, false);
+	ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (ret) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d "
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8d291ccf5c8..3384ca16456 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -610,7 +610,6 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	else
 		ah->tx_trig_level = (AR_FTRIG_512B >> AR_FTRIG_S);
 
-	ath9k_init_nfcal_hist_buffer(ah);
 	ah->bb_watchdog_timeout_ms = 25;
 
 	common->state = ATH_HW_INITIALIZED;
@@ -1183,9 +1182,6 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 
 	ath9k_hw_spur_mitigate_freq(ah, chan);
 
-	if (!chan->oneTimeCalsDone)
-		chan->oneTimeCalsDone = true;
-
 	return true;
 }
 
@@ -1218,7 +1214,7 @@ bool ath9k_hw_check_alive(struct ath_hw *ah)
 EXPORT_SYMBOL(ath9k_hw_check_alive);
 
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
-		    bool bChannelChange)
+		   struct ath9k_hw_cal_data *caldata, bool bChannelChange)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	u32 saveLedState;
@@ -1243,9 +1239,19 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
 
-	if (curchan && !ah->chip_fullsleep)
+	if (curchan && !ah->chip_fullsleep && ah->caldata)
 		ath9k_hw_getnf(ah, curchan);
 
+	ah->caldata = caldata;
+	if (caldata &&
+	    (chan->channel != caldata->channel ||
+	     (chan->channelFlags & ~CHANNEL_CW_INT) !=
+	     (caldata->channelFlags & ~CHANNEL_CW_INT))) {
+		/* Operating channel changed, reset channel calibration data */
+		memset(caldata, 0, sizeof(*caldata));
+		ath9k_init_nfcal_hist_buffer(ah, chan);
+	}
+
 	if (bChannelChange &&
 	    (ah->chip_fullsleep != true) &&
 	    (ah->curchan != NULL) &&
@@ -1256,7 +1262,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
-			ath9k_hw_start_nfcal(ah);
+			ath9k_hw_start_nfcal(ah, true);
 			return 0;
 		}
 	}
@@ -1461,11 +1467,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
-	if (AR_SREV_9300_20_OR_LATER(ah)) {
-		ath9k_hw_loadnf(ah, curchan);
-		ath9k_hw_start_nfcal(ah);
+	if (AR_SREV_9300_20_OR_LATER(ah))
 		ar9003_hw_bb_watchdog_config(ah);
-	}
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 2d30efc0b94..399f7c1283c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -346,19 +346,25 @@ enum ath9k_int {
 	 CHANNEL_HT40PLUS |			\
 	 CHANNEL_HT40MINUS)
 
-struct ath9k_channel {
-	struct ieee80211_channel *chan;
+struct ath9k_hw_cal_data {
 	u16 channel;
 	u32 channelFlags;
-	u32 chanmode;
 	int32_t CalValid;
-	bool oneTimeCalsDone;
 	int8_t iCoff;
 	int8_t qCoff;
 	int16_t rawNoiseFloor;
 	bool paprd_done;
+	bool nfcal_pending;
 	u16 small_signal_gain[AR9300_MAX_CHAINS];
 	u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ];
+	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+};
+
+struct ath9k_channel {
+	struct ieee80211_channel *chan;
+	u16 channel;
+	u32 channelFlags;
+	u32 chanmode;
 };
 
 #define IS_CHAN_G(_c) ((((_c)->channelFlags & (CHANNEL_G)) == CHANNEL_G) || \
@@ -669,7 +675,7 @@ struct ath_hw {
 	enum nl80211_iftype opmode;
 	enum ath9k_power_mode power_mode;
 
-	struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS];
+	struct ath9k_hw_cal_data *caldata;
 	struct ath9k_pacal_info pacal_info;
 	struct ar5416Stats stats;
 	struct ath9k_tx_queue_info txq[ATH9K_NUM_TX_QUEUES];
@@ -863,7 +869,7 @@ const char *ath9k_hw_probe(u16 vendorid, u16 devid);
 void ath9k_hw_deinit(struct ath_hw *ah);
 int ath9k_hw_init(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
-		   bool bChannelChange);
+		   struct ath9k_hw_cal_data *caldata, bool bChannelChange);
 int ath9k_hw_fill_cap_info(struct ath_hw *ah);
 u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan);
 
@@ -958,9 +964,10 @@ void ar9003_hw_bb_watchdog_read(struct ath_hw *ah);
 void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah);
 void ar9003_paprd_enable(struct ath_hw *ah, bool val);
 void ar9003_paprd_populate_single_table(struct ath_hw *ah,
-					struct ath9k_channel *chan, int chain);
-int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_channel *chan,
-			      int chain);
+					struct ath9k_hw_cal_data *caldata,
+					int chain);
+int ar9003_paprd_create_curve(struct ath_hw *ah,
+			      struct ath9k_hw_cal_data *caldata, int chain);
 int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain);
 int ar9003_paprd_init_table(struct ath_hw *ah);
 bool ar9003_paprd_is_done(struct ath_hw *ah);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 0429dda0961..3caa32316e7 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -154,6 +154,27 @@ void ath9k_ps_restore(struct ath_softc *sc)
 	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 }
 
+static void ath_start_ani(struct ath_common *common)
+{
+	struct ath_hw *ah = common->ah;
+	unsigned long timestamp = jiffies_to_msecs(jiffies);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (!(sc->sc_flags & SC_OP_ANI_RUN))
+		return;
+
+	if (sc->sc_flags & SC_OP_OFFCHANNEL)
+		return;
+
+	common->ani.longcal_timer = timestamp;
+	common->ani.shortcal_timer = timestamp;
+	common->ani.checkani_timer = timestamp;
+
+	mod_timer(&common->ani.timer,
+		  jiffies +
+			msecs_to_jiffies((u32)ah->config.ani_poll_interval));
+}
+
 /*
  * Set/change channels.  If the channel is really being changed, it's done
  * by reseting the chip.  To accomplish this we must first cleanup any pending
@@ -162,16 +183,23 @@ void ath9k_ps_restore(struct ath_softc *sc)
 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 		    struct ath9k_channel *hchan)
 {
+	struct ath_wiphy *aphy = hw->priv;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_conf *conf = &common->hw->conf;
 	bool fastcc = true, stopped;
 	struct ieee80211_channel *channel = hw->conf.channel;
+	struct ath9k_hw_cal_data *caldata = NULL;
 	int r;
 
 	if (sc->sc_flags & SC_OP_INVALID)
 		return -EIO;
 
+	del_timer_sync(&common->ani.timer);
+	cancel_work_sync(&sc->paprd_work);
+	cancel_work_sync(&sc->hw_check_work);
+	cancel_delayed_work_sync(&sc->tx_complete_work);
+
 	ath9k_ps_wakeup(sc);
 
 	/*
@@ -191,9 +219,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	 * to flush data frames already in queue because of
 	 * changing channel. */
 
-	if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
+	if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
 		fastcc = false;
 
+	if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
+		caldata = &aphy->caldata;
+
 	ath_print(common, ATH_DBG_CONFIG,
 		  "(%u MHz) -> (%u MHz), conf_is_ht40: %d\n",
 		  sc->sc_ah->curchan->channel,
@@ -201,7 +232,7 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 
 	spin_lock_bh(&sc->sc_resetlock);
 
-	r = ath9k_hw_reset(ah, hchan, fastcc);
+	r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset channel (%u MHz), "
@@ -212,8 +243,6 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
-	sc->sc_flags &= ~SC_OP_FULL_RESET;
-
 	if (ath_startrecv(sc) != 0) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to restart recv logic\n");
@@ -225,6 +254,12 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	ath_update_txpow(sc);
 	ath9k_hw_set_interrupts(ah, ah->imask);
 
+	if (!(sc->sc_flags & (SC_OP_OFFCHANNEL | SC_OP_SCANNING))) {
+		ath_start_ani(common);
+		ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
+		ath_beacon_config(sc, NULL);
+	}
+
  ps_restore:
 	ath9k_ps_restore(sc);
 	return r;
@@ -233,17 +268,19 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 static void ath_paprd_activate(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	int chain;
 
-	if (!ah->curchan->paprd_done)
+	if (!caldata || !caldata->paprd_done)
 		return;
 
 	ath9k_ps_wakeup(sc);
+	ar9003_paprd_enable(ah, false);
 	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 		if (!(ah->caps.tx_chainmask & BIT(chain)))
 			continue;
 
-		ar9003_paprd_populate_single_table(ah, ah->curchan, chain);
+		ar9003_paprd_populate_single_table(ah, caldata, chain);
 	}
 
 	ar9003_paprd_enable(ah, true);
@@ -261,6 +298,7 @@ void ath_paprd_calibrate(struct work_struct *work)
 	int band = hw->conf.channel->band;
 	struct ieee80211_supported_band *sband = &sc->sbands[band];
 	struct ath_tx_control txctl;
+	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	int qnum, ftype;
 	int chain_ok = 0;
 	int chain;
@@ -268,6 +306,9 @@ void ath_paprd_calibrate(struct work_struct *work)
 	int time_left;
 	int i;
 
+	if (!caldata)
+		return;
+
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
 		return;
@@ -322,7 +363,7 @@ void ath_paprd_calibrate(struct work_struct *work)
 		if (!ar9003_paprd_is_done(ah))
 			break;
 
-		if (ar9003_paprd_create_curve(ah, ah->curchan, chain) != 0)
+		if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
 			break;
 
 		chain_ok = 1;
@@ -330,7 +371,7 @@ void ath_paprd_calibrate(struct work_struct *work)
 	kfree_skb(skb);
 
 	if (chain_ok) {
-		ah->curchan->paprd_done = true;
+		caldata->paprd_done = true;
 		ath_paprd_activate(sc);
 	}
 
@@ -439,33 +480,14 @@ set_timer:
 		cal_interval = min(cal_interval, (u32)short_cal_interval);
 
 	mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) &&
-	    !(sc->sc_flags & SC_OP_SCANNING)) {
-		if (!sc->sc_ah->curchan->paprd_done)
+	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
+		if (!ah->caldata->paprd_done)
 			ieee80211_queue_work(sc->hw, &sc->paprd_work);
 		else
 			ath_paprd_activate(sc);
 	}
 }
 
-static void ath_start_ani(struct ath_common *common)
-{
-	struct ath_hw *ah = common->ah;
-	unsigned long timestamp = jiffies_to_msecs(jiffies);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-
-	if (!(sc->sc_flags & SC_OP_ANI_RUN))
-		return;
-
-	common->ani.longcal_timer = timestamp;
-	common->ani.shortcal_timer = timestamp;
-	common->ani.checkani_timer = timestamp;
-
-	mod_timer(&common->ani.timer,
-		  jiffies +
-			msecs_to_jiffies((u32)ah->config.ani_poll_interval));
-}
-
 /*
  * Update tx/rx chainmask. For legacy association,
  * hard code chainmask to 1x1, for 11n association, use
@@ -477,7 +499,7 @@ void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	if ((sc->sc_flags & SC_OP_SCANNING) || is_ht ||
+	if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
 	    (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
 		common->tx_chainmask = ah->caps.tx_chainmask;
 		common->rx_chainmask = ah->caps.rx_chainmask;
@@ -817,7 +839,7 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 		ah->curchan = ath_get_curchannel(sc, sc->hw);
 
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(ah, ah->curchan, false);
+	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset channel (%u MHz), "
@@ -877,7 +899,7 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 		ah->curchan = ath_get_curchannel(sc, hw);
 
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(ah, ah->curchan, false);
+	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
 			  "Unable to reset channel (%u MHz), "
@@ -910,7 +932,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	ath_flushrecv(sc);
 
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
+	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 	if (r)
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d\n", r);
@@ -1085,7 +1107,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * and then setup of the interrupt mask.
 	 */
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(ah, init_channel, false);
+	r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (r) {
 		ath_print(common, ATH_DBG_FATAL,
 			  "Unable to reset hardware; reset status %d "
@@ -1579,6 +1601,10 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 
 		aphy->chan_idx = pos;
 		aphy->chan_is_ht = conf_is_ht(conf);
+		if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+			sc->sc_flags |= SC_OP_OFFCHANNEL;
+		else
+			sc->sc_flags &= ~SC_OP_OFFCHANNEL;
 
 		if (aphy->state == ATH_WIPHY_SCAN ||
 		    aphy->state == ATH_WIPHY_ACTIVE)
@@ -1990,7 +2016,6 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	mutex_lock(&sc->mutex);
 	if (ath9k_wiphy_scanning(sc)) {
@@ -2008,10 +2033,6 @@ static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
 	aphy->state = ATH_WIPHY_SCAN;
 	ath9k_wiphy_pause_all_forced(sc, aphy);
 	sc->sc_flags |= SC_OP_SCANNING;
-	del_timer_sync(&common->ani.timer);
-	cancel_work_sync(&sc->paprd_work);
-	cancel_work_sync(&sc->hw_check_work);
-	cancel_delayed_work_sync(&sc->tx_complete_work);
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2023,15 +2044,10 @@ static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	mutex_lock(&sc->mutex);
 	aphy->state = ATH_WIPHY_ACTIVE;
 	sc->sc_flags &= ~SC_OP_SCANNING;
-	sc->sc_flags |= SC_OP_FULL_RESET;
-	ath_start_ani(common);
-	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
-	ath_beacon_config(sc, NULL);
 	mutex_unlock(&sc->mutex);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index da0cfe90c38..a3fc987ebab 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -1140,6 +1140,11 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 		if (flush)
 			goto requeue;
 
+		retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs,
+						 rxs, &decrypt_error);
+		if (retval)
+			goto requeue;
+
 		rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
 		if (rs.rs_tstamp > tsf_lower &&
 		    unlikely(rs.rs_tstamp - tsf_lower > 0x10000000))
@@ -1149,11 +1154,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 		    unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
 			rxs->mactime += 0x100000000ULL;
 
-		retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs,
-						 rxs, &decrypt_error);
-		if (retval)
-			goto requeue;
-
 		/* Ensure we always have an skb to requeue once we are done
 		 * processing the current buffer's skb */
 		requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 501b72821b4..4dda14e3622 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -120,26 +120,14 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
 	list_add_tail(&ac->list, &txq->axq_acq);
 }
 
-static void ath_tx_pause_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
-{
-	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
-
-	spin_lock_bh(&txq->axq_lock);
-	tid->paused++;
-	spin_unlock_bh(&txq->axq_lock);
-}
-
 static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 {
 	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
 
-	BUG_ON(tid->paused <= 0);
-	spin_lock_bh(&txq->axq_lock);
-
-	tid->paused--;
+	WARN_ON(!tid->paused);
 
-	if (tid->paused > 0)
-		goto unlock;
+	spin_lock_bh(&txq->axq_lock);
+	tid->paused = false;
 
 	if (list_empty(&tid->buf_q))
 		goto unlock;
@@ -157,15 +145,10 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 	struct list_head bf_head;
 	INIT_LIST_HEAD(&bf_head);
 
-	BUG_ON(tid->paused <= 0);
-	spin_lock_bh(&txq->axq_lock);
+	WARN_ON(!tid->paused);
 
-	tid->paused--;
-
-	if (tid->paused > 0) {
-		spin_unlock_bh(&txq->axq_lock);
-		return;
-	}
+	spin_lock_bh(&txq->axq_lock);
+	tid->paused = false;
 
 	while (!list_empty(&tid->buf_q)) {
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
@@ -811,7 +794,7 @@ void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 	an = (struct ath_node *)sta->drv_priv;
 	txtid = ATH_AN_2_TID(an, tid);
 	txtid->state |= AGGR_ADDBA_PROGRESS;
-	ath_tx_pause_tid(sc, txtid);
+	txtid->paused = true;
 	*ssn = txtid->seq_start;
 }
 
@@ -835,10 +818,9 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
 		return;
 	}
 
-	ath_tx_pause_tid(sc, txtid);
-
 	/* drop all software retried frames and mark this TID */
 	spin_lock_bh(&txq->axq_lock);
+	txtid->paused = true;
 	while (!list_empty(&txtid->buf_q)) {
 		bf = list_first_entry(&txtid->buf_q, struct ath_buf, list);
 		if (!bf_isretried(bf)) {
@@ -1181,7 +1163,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 			  "Failed to stop TX DMA. Resetting hardware!\n");
 
 		spin_lock_bh(&sc->sc_resetlock);
-		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
+		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 		if (r)
 			ath_print(common, ATH_DBG_FATAL,
 				  "Unable to reset hardware; reset status %d\n",
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c2746fc7f2b..3b632161c10 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -191,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int atmel_config(struct pcmcia_device *link)
@@ -254,7 +251,7 @@ static int atmel_config(struct pcmcia_device *link)
 
 	((local_info_t*)link->priv)->eth_dev =
 		init_atmel_card(link->irq,
-				link->io.BasePort1,
+				link->resource[0]->start,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
 				&link->dev,
 				card_present,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 0e99b634267..dfbc41d431f 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -65,7 +64,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 {
 	struct ssb_bus *ssb;
 	win_req_t win;
-	memreq_t mem;
 	int err = -ENOMEM;
 	int res = 0;
 
@@ -78,12 +76,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	dev->conf.Attributes = CONF_ENABLE_IRQ;
 	dev->conf.IntType = INT_MEMORY_AND_IO;
 
-	dev->io.BasePort2 = 0;
-	dev->io.NumPorts2 = 0;
-	dev->io.Attributes2 = 0;
-
-	win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM |
-			 WIN_ENABLE | WIN_DATA_WIDTH_16 |
+	win.Attributes =  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
 	win.Base = 0;
 	win.Size = SSB_CORE_SIZE;
@@ -92,9 +85,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (res != 0)
 		goto err_kfree_ssb;
 
-	mem.CardOffset = 0;
-	mem.Page = 0;
-	res = pcmcia_map_mem_page(dev, dev->win, &mem);
+	res = pcmcia_map_mem_page(dev, dev->win, 0);
 	if (res != 0)
 		goto err_disable;
 
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 29b31a694b5..ba54d1b04d2 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -23,7 +22,7 @@
 #include "hostap_wlan.h"
 
 
-static dev_info_t dev_info = "hostap_cs";
+static char *dev_info = "hostap_cs";
 
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
@@ -225,27 +224,18 @@ static int prism2_pccard_card_present(local_info_t *local)
 static void sandisk_set_iobase(local_info_t *local)
 {
 	int res;
-	conf_reg_t reg;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = 0x10; /* 0x3f0 IO base 1 */
-	reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, 0x10,
+				hw_priv->link->resource[0]->start & 0x00ff);
 	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
 		       " res=%d\n", res);
 	}
 	udelay(10);
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = 0x12; /* 0x3f2 IO base 2 */
-	reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, 0x12,
+				(hw_priv->link->resource[0]->start >> 8) & 0x00ff);
 	if (res != 0) {
 		printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
 		       " res=%d\n", res);
@@ -271,12 +261,11 @@ static void sandisk_write_hcr(local_info_t *local, int hcr)
 static int sandisk_enable_wireless(struct net_device *dev)
 {
 	int res, ret = 0;
-	conf_reg_t reg;
 	struct hostap_interface *iface = netdev_priv(dev);
 	local_info_t *local = iface->local;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
-	if (hw_priv->link->io.NumPorts1 < 0x42) {
+	if (resource_size(hw_priv->link->resource[0]) < 0x42) {
 		/* Not enough ports to be SanDisk multi-function card */
 		ret = -ENODEV;
 		goto done;
@@ -298,12 +287,8 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	       " - using vendor-specific initialization\n", dev->name);
 	hw_priv->sandisk_connectplus = 1;
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
@@ -311,16 +296,13 @@ static int sandisk_enable_wireless(struct net_device *dev)
 	}
 	mdelay(5);
 
-	reg.Function = 0;
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
 	/*
 	 * Do not enable interrupts here to avoid some bogus events. Interrupts
 	 * will be enabled during the first cor_sreset call.
 	 */
-	reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				(COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE |
+					COR_FUNC_ENA));
 	if (res != 0) {
 		printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
 		       dev->name, res);
@@ -343,30 +325,23 @@ done:
 static void prism2_pccard_cor_sreset(local_info_t *local)
 {
 	int res;
-	conf_reg_t reg;
+	u8 val;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
 	if (!prism2_pccard_card_present(local))
 	       return;
 
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	reg.Value = 0;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
 		       res);
 		return;
 	}
 	printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
-	       reg.Value);
+		val);
 
-	reg.Action = CS_WRITE;
-	reg.Value |= COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	val |= COR_SOFT_RESET;
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
 		       res);
@@ -375,11 +350,10 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 
 	mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
 
-	reg.Value &= ~COR_SOFT_RESET;
+	val &= ~COR_SOFT_RESET;
 	if (hw_priv->sandisk_connectplus)
-		reg.Value |= COR_IREQ_ENA;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+		val |= COR_IREQ_ENA;
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR, val);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
 		       res);
@@ -396,8 +370,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
 static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 {
 	int res;
-	conf_reg_t reg;
-	int old_cor;
+	u8 old_cor;
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
 	if (!prism2_pccard_card_present(local))
@@ -408,25 +381,17 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 		return;
 	}
 
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	reg.Value = 0;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_read_config_byte(hw_priv->link, CISREG_COR, &old_cor);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
 		       "(%d)\n", res);
 		return;
 	}
 	printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
-	       reg.Value);
-	old_cor = reg.Value;
+		old_cor);
 
-	reg.Action = CS_WRITE;
-	reg.Value |= COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				old_cor | COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
 		       "(%d)\n", res);
@@ -436,11 +401,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	mdelay(10);
 
 	/* Setup Genesis mode */
-	reg.Action = CS_WRITE;
-	reg.Value = hcr;
-	reg.Offset = CISREG_CCSR;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_CCSR, hcr);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
 		       "(%d)\n", res);
@@ -448,11 +409,8 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
 	}
 	mdelay(10);
 
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = old_cor & ~COR_SOFT_RESET;
-	res = pcmcia_access_configuration_register(hw_priv->link,
-						   &reg);
+	res = pcmcia_write_config_byte(hw_priv->link, CISREG_COR,
+				old_cor & ~COR_SOFT_RESET);
 	if (res != 0) {
 		printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
 		       "(%d)\n", res);
@@ -561,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
 	       "dflt->io.nwin=%d\n",
 	       cfg->io.nwin, dflt->io.nwin);
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
-		       "io.base=0x%04x, len=%d\n", io->flags,
-		       io->win[0].base, io->win[0].len);
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags &
-			CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+					pcmcia_io_cfg_data_width(io->flags);
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int prism2_config(struct pcmcia_device *link)
@@ -646,7 +598,7 @@ static int prism2_config(struct pcmcia_device *link)
 		goto failed_unlock;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 
 	spin_unlock_irqrestore(&local->irq_init_lock, flags);
 
@@ -658,12 +610,10 @@ static int prism2_config(struct pcmcia_device *link)
 		       link->conf.Vpp % 10);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1+link->io.NumPorts1-1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2+link->io.NumPorts2-1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	local->shutdown = 0;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index c24c5efeae1..16bbfa3189a 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1924,6 +1924,10 @@ static int ipw2100_net_init(struct net_device *dev)
 		bg_band->channels =
 			kzalloc(geo->bg_channels *
 				sizeof(struct ieee80211_channel), GFP_KERNEL);
+		if (!bg_band->channels) {
+			ipw2100_down(priv);
+			return -ENOMEM;
+		}
 		/* translate geo->bg to bg_band.channels */
 		for (i = 0; i < geo->bg_channels; i++) {
 			bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
index f052c6d09b3..d706b8afbe5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
@@ -980,7 +980,7 @@ ssize_t iwl_ucode_bt_stats_read(struct file *file,
 			 le32_to_cpu(bt->lo_priority_tx_req_cnt),
 			 accum_bt->lo_priority_tx_req_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			 "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
+			 "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
 			 le32_to_cpu(bt->lo_priority_tx_denied_cnt),
 			 accum_bt->lo_priority_tx_denied_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index a1b6d202d57..9dd9e64c2b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -1429,7 +1429,7 @@ int iwlagn_manage_ibss_station(struct iwl_priv *priv,
 void iwl_free_tfds_in_queue(struct iwl_priv *priv,
 			    int sta_id, int tid, int freed)
 {
-	WARN_ON(!spin_is_locked(&priv->sta_lock));
+	lockdep_assert_held(&priv->sta_lock);
 
 	if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
 		priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 35c86d22b14..23e5c42e7d7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -300,8 +300,9 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
 				      struct ieee80211_sta *sta)
 {
 	int ret = -EAGAIN;
+	u32 load = rs_tl_get_load(lq_data, tid);
 
-	if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
+	if (load > IWL_AGG_LOAD_THRESHOLD) {
 		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
 				sta->addr, tid);
 		ret = ieee80211_start_tx_ba_session(sta, tid);
@@ -311,12 +312,14 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
 			 * this might be cause by reloading firmware
 			 * stop the tx ba session here
 			 */
-			IWL_DEBUG_HT(priv, "Fail start Tx agg on tid: %d\n",
+			IWL_ERR(priv, "Fail start Tx agg on tid: %d\n",
 				tid);
 			ieee80211_stop_tx_ba_session(sta, tid);
 		}
-	} else
-		IWL_ERR(priv, "Fail finding valid aggregation tid: %d\n", tid);
+	} else {
+		IWL_ERR(priv, "Aggregation not enabled for tid %d "
+			"because load = %u\n", tid, load);
+	}
 	return ret;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 55a1b31fd09..d04502d54df 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -1117,7 +1117,7 @@ int iwlagn_txq_check_empty(struct iwl_priv *priv,
 	u8 *addr = priv->stations[sta_id].sta.sta.addr;
 	struct iwl_tid_data *tid_data = &priv->stations[sta_id].tid[tid];
 
-	WARN_ON(!spin_is_locked(&priv->sta_lock));
+	lockdep_assert_held(&priv->sta_lock);
 
 	switch (priv->stations[sta_id].tid[tid].agg.state) {
 	case IWL_EMPTYING_HW_QUEUE_DELBA:
@@ -1331,7 +1331,14 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
 	tid = ba_resp->tid;
 	agg = &priv->stations[sta_id].tid[tid].agg;
 	if (unlikely(agg->txq_id != scd_flow)) {
-		IWL_ERR(priv, "BA scd_flow %d does not match txq_id %d\n",
+		/*
+		 * FIXME: this is a uCode bug which need to be addressed,
+		 * log the information and return for now!
+		 * since it is possible happen very often and in order
+		 * not to fill the syslog, don't enable the logging by default
+		 */
+		IWL_DEBUG_TX_REPLY(priv,
+			"BA scd_flow %d does not match txq_id %d\n",
 			scd_flow, agg->txq_id);
 		return;
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 8024d44ce4b..8ccb6d205b6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2000,6 +2000,7 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif)
 {
 	struct iwl_priv *priv = hw->priv;
+	bool scan_completed = false;
 
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
@@ -2013,7 +2014,7 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 	if (priv->vif == vif) {
 		priv->vif = NULL;
 		if (priv->scan_vif == vif) {
-			ieee80211_scan_completed(priv->hw, true);
+			scan_completed = true;
 			priv->scan_vif = NULL;
 			priv->scan_request = NULL;
 		}
@@ -2021,6 +2022,9 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 	}
 	mutex_unlock(&priv->mutex);
 
+	if (scan_completed)
+		ieee80211_scan_completed(priv->hw, true);
+
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 5c2bcef5df0..0b961a353ff 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -71,7 +71,7 @@ do {                                            			\
 #define IWL_DEBUG(__priv, level, fmt, args...)
 #define IWL_DEBUG_LIMIT(__priv, level, fmt, args...)
 static inline void iwl_print_hex_dump(struct iwl_priv *priv, int level,
-				      void *p, u32 len)
+				      const void *p, u32 len)
 {}
 #endif				/* CONFIG_IWLWIFI_DEBUG */
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
index ae7319bb3a9..4cf864c664e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-devtrace.h
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -193,7 +193,7 @@ TRACE_EVENT(iwlwifi_dev_tx,
 		__entry->framelen = buf0_len + buf1_len;
 		memcpy(__get_dynamic_array(tfd), tfd, tfdlen);
 		memcpy(__get_dynamic_array(buf0), buf0, buf0_len);
-		memcpy(__get_dynamic_array(buf1), buf1, buf0_len);
+		memcpy(__get_dynamic_array(buf1), buf1, buf1_len);
 	),
 	TP_printk("[%p] TX %.2x (%zu bytes)",
 		  __entry->priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index b0c6b047390..a4b3663a262 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -298,7 +298,7 @@ EXPORT_SYMBOL(iwl_init_scan_params);
 
 static int iwl_scan_initiate(struct iwl_priv *priv, struct ieee80211_vif *vif)
 {
-	WARN_ON(!mutex_is_locked(&priv->mutex));
+	lockdep_assert_held(&priv->mutex);
 
 	IWL_DEBUG_INFO(priv, "Starting scan...\n");
 	set_bit(STATUS_SCANNING, &priv->status);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 9511f03f07e..7e0829be5e7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -773,7 +773,7 @@ static int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty)
 
 int iwl_restore_default_wep_keys(struct iwl_priv *priv)
 {
-	WARN_ON(!mutex_is_locked(&priv->mutex));
+	lockdep_assert_held(&priv->mutex);
 
 	return iwl_send_static_wepkey_cmd(priv, 0);
 }
@@ -784,7 +784,7 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
 {
 	int ret;
 
-	WARN_ON(!mutex_is_locked(&priv->mutex));
+	lockdep_assert_held(&priv->mutex);
 
 	IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
 		      keyconf->keyidx);
@@ -808,7 +808,7 @@ int iwl_set_default_wep_key(struct iwl_priv *priv,
 {
 	int ret;
 
-	WARN_ON(!mutex_is_locked(&priv->mutex));
+	lockdep_assert_held(&priv->mutex);
 
 	if (keyconf->keylen != WEP_KEY_LEN_128 &&
 	    keyconf->keylen != WEP_KEY_LEN_64) {
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 25f90276098..8e9fbfd804b 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -257,6 +257,29 @@ static int lbs_add_supported_rates_tlv(u8 *tlv)
 	return sizeof(rate_tlv->header) + i;
 }
 
+/* Add common rates from a TLV and return the new end of the TLV */
+static u8 *
+add_ie_rates(u8 *tlv, const u8 *ie, int *nrates)
+{
+	int hw, ap, ap_max = ie[1];
+	u8 hw_rate;
+
+	/* Advance past IE header */
+	ie += 2;
+
+	lbs_deb_hex(LBS_DEB_ASSOC, "AP IE Rates", (u8 *) ie, ap_max);
+
+	for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
+		hw_rate = lbs_rates[hw].bitrate / 5;
+		for (ap = 0; ap < ap_max; ap++) {
+			if (hw_rate == (ie[ap] & 0x7f)) {
+				*tlv++ = ie[ap];
+				*nrates = *nrates + 1;
+			}
+		}
+	}
+	return tlv;
+}
 
 /*
  * Adds a TLV with all rates the hardware *and* BSS supports.
@@ -264,8 +287,11 @@ static int lbs_add_supported_rates_tlv(u8 *tlv)
 static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss)
 {
 	struct mrvl_ie_rates_param_set *rate_tlv = (void *)tlv;
-	const u8 *rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
-	int n;
+	const u8 *rates_eid, *ext_rates_eid;
+	int n = 0;
+
+	rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SUPP_RATES);
+	ext_rates_eid = ieee80211_bss_get_ie(bss, WLAN_EID_EXT_SUPP_RATES);
 
 	/*
 	 * 01 00                   TLV_TYPE_RATES
@@ -275,26 +301,21 @@ static int lbs_add_common_rates_tlv(u8 *tlv, struct cfg80211_bss *bss)
 	rate_tlv->header.type = cpu_to_le16(TLV_TYPE_RATES);
 	tlv += sizeof(rate_tlv->header);
 
-	if (!rates_eid) {
+	/* Add basic rates */
+	if (rates_eid) {
+		tlv = add_ie_rates(tlv, rates_eid, &n);
+
+		/* Add extended rates, if any */
+		if (ext_rates_eid)
+			tlv = add_ie_rates(tlv, ext_rates_eid, &n);
+	} else {
+		lbs_deb_assoc("assoc: bss had no basic rate IE\n");
 		/* Fallback: add basic 802.11b rates */
 		*tlv++ = 0x82;
 		*tlv++ = 0x84;
 		*tlv++ = 0x8b;
 		*tlv++ = 0x96;
 		n = 4;
-	} else {
-		int hw, ap;
-		u8 ap_max = rates_eid[1];
-		n = 0;
-		for (hw = 0; hw < ARRAY_SIZE(lbs_rates); hw++) {
-			u8 hw_rate = lbs_rates[hw].bitrate / 5;
-			for (ap = 0; ap < ap_max; ap++) {
-				if (hw_rate == (rates_eid[ap+2] & 0x7f)) {
-					*tlv++ = rates_eid[ap+2];
-					n++;
-				}
-			}
-		}
 	}
 
 	rate_tlv->header.len = cpu_to_le16(n);
@@ -465,7 +486,15 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
 	lbs_deb_enter(LBS_DEB_CFG80211);
 
 	bsssize = get_unaligned_le16(&scanresp->bssdescriptsize);
-	nr_sets = le16_to_cpu(resp->size);
+	nr_sets = le16_to_cpu(scanresp->nr_sets);
+
+	lbs_deb_scan("scan response: %d BSSs (%d bytes); resp size %d bytes\n",
+			nr_sets, bsssize, le16_to_cpu(resp->size));
+
+	if (nr_sets == 0) {
+		ret = 0;
+		goto done;
+	}
 
 	/*
 	 * The general layout of the scan response is described in chapter
@@ -670,8 +699,13 @@ static void lbs_scan_worker(struct work_struct *work)
 
 	if (priv->scan_channel >= priv->scan_req->n_channels) {
 		/* Mark scan done */
-		cfg80211_scan_done(priv->scan_req, false);
+		if (priv->internal_scan)
+			kfree(priv->scan_req);
+		else
+			cfg80211_scan_done(priv->scan_req, false);
+
 		priv->scan_req = NULL;
+		priv->last_scan = jiffies;
 	}
 
 	/* Restart network */
@@ -682,10 +716,33 @@ static void lbs_scan_worker(struct work_struct *work)
 
 	kfree(scan_cmd);
 
+	/* Wake up anything waiting on scan completion */
+	if (priv->scan_req == NULL) {
+		lbs_deb_scan("scan: waking up waiters\n");
+		wake_up_all(&priv->scan_q);
+	}
+
  out_no_scan_cmd:
 	lbs_deb_leave(LBS_DEB_SCAN);
 }
 
+static void _internal_start_scan(struct lbs_private *priv, bool internal,
+	struct cfg80211_scan_request *request)
+{
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n",
+		request->n_ssids, request->n_channels, request->ie_len);
+
+	priv->scan_channel = 0;
+	queue_delayed_work(priv->work_thread, &priv->scan_work,
+		msecs_to_jiffies(50));
+
+	priv->scan_req = request;
+	priv->internal_scan = internal;
+
+	lbs_deb_leave(LBS_DEB_CFG80211);
+}
 
 static int lbs_cfg_scan(struct wiphy *wiphy,
 	struct net_device *dev,
@@ -702,18 +759,11 @@ static int lbs_cfg_scan(struct wiphy *wiphy,
 		goto out;
 	}
 
-	lbs_deb_scan("scan: ssids %d, channels %d, ie_len %zd\n",
-		request->n_ssids, request->n_channels, request->ie_len);
-
-	priv->scan_channel = 0;
-	queue_delayed_work(priv->work_thread, &priv->scan_work,
-		msecs_to_jiffies(50));
+	_internal_start_scan(priv, false, request);
 
 	if (priv->surpriseremoved)
 		ret = -EIO;
 
-	priv->scan_req = request;
-
  out:
 	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
 	return ret;
@@ -1000,6 +1050,7 @@ static int lbs_associate(struct lbs_private *priv,
 	int status;
 	int ret;
 	u8 *pos = &(cmd->iebuf[0]);
+	u8 *tmp;
 
 	lbs_deb_enter(LBS_DEB_CFG80211);
 
@@ -1044,7 +1095,9 @@ static int lbs_associate(struct lbs_private *priv,
 	pos += lbs_add_cf_param_tlv(pos);
 
 	/* add rates TLV */
+	tmp = pos + 4; /* skip Marvell IE header */
 	pos += lbs_add_common_rates_tlv(pos, bss);
+	lbs_deb_hex(LBS_DEB_ASSOC, "Common Rates", tmp, pos - tmp);
 
 	/* add auth type TLV */
 	if (priv->fwrelease >= 0x09000000)
@@ -1124,7 +1177,62 @@ done:
 	return ret;
 }
 
+static struct cfg80211_scan_request *
+_new_connect_scan_req(struct wiphy *wiphy, struct cfg80211_connect_params *sme)
+{
+	struct cfg80211_scan_request *creq = NULL;
+	int i, n_channels = 0;
+	enum ieee80211_band band;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (wiphy->bands[band])
+			n_channels += wiphy->bands[band]->n_channels;
+	}
+
+	creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
+		       n_channels * sizeof(void *),
+		       GFP_ATOMIC);
+	if (!creq)
+		return NULL;
+
+	/* SSIDs come after channels */
+	creq->ssids = (void *)&creq->channels[n_channels];
+	creq->n_channels = n_channels;
+	creq->n_ssids = 1;
+
+	/* Scan all available channels */
+	i = 0;
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		int j;
+
+		if (!wiphy->bands[band])
+			continue;
+
+		for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+			/* ignore disabled channels */
+			if (wiphy->bands[band]->channels[j].flags &
+						IEEE80211_CHAN_DISABLED)
+				continue;
+
+			creq->channels[i] = &wiphy->bands[band]->channels[j];
+			i++;
+		}
+	}
+	if (i) {
+		/* Set real number of channels specified in creq->channels[] */
+		creq->n_channels = i;
+
+		/* Scan for the SSID we're going to connect to */
+		memcpy(creq->ssids[0].ssid, sme->ssid, sme->ssid_len);
+		creq->ssids[0].ssid_len = sme->ssid_len;
+	} else {
+		/* No channels found... */
+		kfree(creq);
+		creq = NULL;
+	}
 
+	return creq;
+}
 
 static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 			   struct cfg80211_connect_params *sme)
@@ -1136,37 +1244,43 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	lbs_deb_enter(LBS_DEB_CFG80211);
 
-	if (sme->bssid) {
-		bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
-			sme->ssid, sme->ssid_len,
-			WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
-	} else {
-		/*
-		 * Here we have an impedance mismatch. The firmware command
-		 * CMD_802_11_ASSOCIATE always needs a BSSID, it cannot
-		 * connect otherwise. However, for the connect-API of
-		 * cfg80211 the bssid is purely optional. We don't get one,
-		 * except the user specifies one on the "iw" command line.
-		 *
-		 * If we don't got one, we could initiate a scan and look
-		 * for the best matching cfg80211_bss entry.
-		 *
-		 * Or, better yet, net/wireless/sme.c get's rewritten into
-		 * something more generally useful.
+	if (!sme->bssid) {
+		/* Run a scan if one isn't in-progress already and if the last
+		 * scan was done more than 2 seconds ago.
 		 */
-		lbs_pr_err("TODO: no BSS specified\n");
-		ret = -ENOTSUPP;
-		goto done;
-	}
+		if (priv->scan_req == NULL &&
+		    time_after(jiffies, priv->last_scan + (2 * HZ))) {
+			struct cfg80211_scan_request *creq;
 
+			creq = _new_connect_scan_req(wiphy, sme);
+			if (!creq) {
+				ret = -EINVAL;
+				goto done;
+			}
+
+			lbs_deb_assoc("assoc: scanning for compatible AP\n");
+			_internal_start_scan(priv, true, creq);
+		}
+
+		/* Wait for any in-progress scan to complete */
+		lbs_deb_assoc("assoc: waiting for scan to complete\n");
+		wait_event_interruptible_timeout(priv->scan_q,
+						 (priv->scan_req == NULL),
+						 (15 * HZ));
+		lbs_deb_assoc("assoc: scanning competed\n");
+	}
 
+	/* Find the BSS we want using available scan results */
+	bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
+		sme->ssid, sme->ssid_len,
+		WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
 	if (!bss) {
-		lbs_pr_err("assicate: bss %pM not in scan results\n",
+		lbs_pr_err("assoc: bss %pM not in scan results\n",
 			   sme->bssid);
 		ret = -ENOENT;
 		goto done;
 	}
-	lbs_deb_assoc("trying %pM", sme->bssid);
+	lbs_deb_assoc("trying %pM\n", bss->bssid);
 	lbs_deb_assoc("cipher 0x%x, key index %d, key len %d\n",
 		      sme->crypto.cipher_group,
 		      sme->key_idx, sme->key_len);
@@ -1229,7 +1343,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
 	lbs_set_radio(priv, preamble, 1);
 
 	/* Do the actual association */
-	lbs_associate(priv, bss, sme);
+	ret = lbs_associate(priv, bss, sme);
 
  done:
 	if (bss)
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index 3c7e255e18c..f062ed58390 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -161,6 +161,11 @@ struct lbs_private {
 	/** Scanning */
 	struct delayed_work scan_work;
 	int scan_channel;
+	/* Queue of things waiting for scan completion */
+	wait_queue_head_t scan_q;
+	/* Whether the scan was initiated internally and not by cfg80211 */
+	bool internal_scan;
+	unsigned long last_scan;
 };
 
 extern struct cmd_confirm_sleep confirm_sleep;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 08e4e390800..9c298396be5 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -802,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 			 unsigned int vcc,
 			 void *priv_data)
 {
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
@@ -816,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int if_cs_probe(struct pcmcia_device *p_dev)
@@ -854,7 +853,8 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 		goto out1;
 
 	/* Initialize io access */
-	card->iobase = ioport_map(p_dev->io.BasePort1, p_dev->io.NumPorts1);
+	card->iobase = ioport_map(p_dev->resource[0]->start,
+				resource_size(p_dev->resource[0]));
 	if (!card->iobase) {
 		lbs_pr_err("error in ioport_map\n");
 		ret = -EIO;
@@ -873,9 +873,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	}
 
 	/* Finally, report what we've done */
-	lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
-	       p_dev->irq, p_dev->io.BasePort1,
-	       p_dev->io.BasePort1 + p_dev->io.NumPorts1 - 1);
+	lbs_deb_cs("irq %d, io %pR", p_dev->irq, p_dev->resource[0]);
 
 	/*
 	 * Most of the libertas cards can do unaligned register access, but some
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 258967144b9..24958a86747 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -719,6 +719,7 @@ static int lbs_init_adapter(struct lbs_private *priv)
 	priv->deep_sleep_required = 0;
 	priv->wakeup_dev_required = 0;
 	init_waitqueue_head(&priv->ds_awake_q);
+	init_waitqueue_head(&priv->scan_q);
 	priv->authtype_auto = 1;
 	priv->is_host_sleep_configured = 0;
 	priv->is_host_sleep_activated = 0;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index b16d5db52a4..ef46a2d8853 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -192,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			goto next_entry;
 	}
 	return 0;
@@ -258,7 +255,8 @@ orinoco_cs_config(struct pcmcia_device *link)
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
-	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	mem = ioport_map(link->resource[0]->start,
+			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
@@ -280,7 +278,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 	}
 
 	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->io.BasePort1,
+	if (orinoco_if_add(priv, link->resource[0]->start,
 			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index b51a9adc80f..873877e17e1 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -80,35 +79,27 @@ static int
 spectrum_reset(struct pcmcia_device *link, int idle)
 {
 	int ret;
-	conf_reg_t reg;
-	u_int save_cor;
+	u8 save_cor;
+	u8 ccsr;
 
 	/* Doing it if hardware is gone is guaranteed crash */
 	if (!pcmcia_dev_present(link))
 		return -ENODEV;
 
 	/* Save original COR value */
-	reg.Function = 0;
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_COR;
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_read_config_byte(link, CISREG_COR, &save_cor);
 	if (ret)
 		goto failed;
-	save_cor = reg.Value;
 
 	/* Soft-Reset card */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = (save_cor | COR_SOFT_RESET);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_write_config_byte(link, CISREG_COR,
+				(save_cor | COR_SOFT_RESET));
 	if (ret)
 		goto failed;
 	udelay(1000);
 
 	/* Read CCSR */
-	reg.Action = CS_READ;
-	reg.Offset = CISREG_CCSR;
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_read_config_byte(link, CISREG_CCSR, &ccsr);
 	if (ret)
 		goto failed;
 
@@ -116,19 +107,15 @@ spectrum_reset(struct pcmcia_device *link, int idle)
 	 * Start or stop the firmware.  Memory width bit should be
 	 * preserved from the value we've just read.
 	 */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_CCSR;
-	reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ccsr = (idle ? HCR_IDLE : HCR_RUN) | (ccsr & HCR_MEM16);
+	ret = pcmcia_write_config_byte(link, CISREG_CCSR, ccsr);
 	if (ret)
 		goto failed;
 	udelay(1000);
 
 	/* Restore original COR configuration index */
-	reg.Action = CS_WRITE;
-	reg.Offset = CISREG_COR;
-	reg.Value = (save_cor & ~COR_SOFT_RESET);
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_write_config_byte(link, CISREG_COR,
+				(save_cor & ~COR_SOFT_RESET));
 	if (ret)
 		goto failed;
 	udelay(1000);
@@ -266,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			goto next_entry;
 	}
 	return 0;
@@ -332,7 +317,8 @@ spectrum_cs_config(struct pcmcia_device *link)
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
-	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+	mem = ioport_map(link->resource[0]->start,
+			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
@@ -359,7 +345,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	}
 
 	/* Register an interface with the stack */
-	if (orinoco_if_add(priv, link->io.BasePort1,
+	if (orinoco_if_add(priv, link->resource[0]->start,
 			   link->irq, NULL) != 0) {
 		printk(KERN_ERR PFX "orinoco_if_add() failed\n");
 		goto failed;
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index 822f8dc26e9..71a101fb2e4 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -43,6 +43,8 @@ static DEFINE_PCI_DEVICE_TABLE(p54p_table) = {
 	{ PCI_DEVICE(0x1260, 0x3886) },
 	/* Intersil PRISM Xbow Wireless LAN adapter (Symbol AP-300) */
 	{ PCI_DEVICE(0x1260, 0xffff) },
+	/* Standard Microsystems Corp SMC2802W Wireless PCI */
+	{ PCI_DEVICE(0x10b8, 0x2802) },
 	{ },
 };
 
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 9c38fc331dc..88560d0ae50 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -315,9 +314,8 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	local->finder = p_dev;
 
 	/* The io structure describes IO port mapping. None used here */
-	p_dev->io.NumPorts1 = 0;
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines = 5;
+	p_dev->resource[0]->end = 0;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
 	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
@@ -394,7 +392,6 @@ static int ray_config(struct pcmcia_device *link)
 	int ret = 0;
 	int i;
 	win_req_t req;
-	memreq_t mem;
 	struct net_device *dev = (struct net_device *)link->priv;
 	ray_dev_t *local = netdev_priv(dev);
 
@@ -431,9 +428,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &link->win);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x0000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, link->win, &mem);
+	ret = pcmcia_map_mem_page(link, link->win, 0);
 	if (ret)
 		goto failed;
 	local->sram = ioremap(req.Base, req.Size);
@@ -447,9 +442,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &local->rmem_handle);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x8000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+	ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000);
 	if (ret)
 		goto failed;
 	local->rmem = ioremap(req.Base, req.Size);
@@ -463,9 +456,7 @@ static int ray_config(struct pcmcia_device *link)
 	ret = pcmcia_request_window(link, &req, &local->amem_handle);
 	if (ret)
 		goto failed;
-	mem.CardOffset = 0x0000;
-	mem.Page = 0;
-	ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+	ret = pcmcia_map_mem_page(link, local->amem_handle, 0);
 	if (ret)
 		goto failed;
 	local->amem = ioremap(req.Base, req.Size);
@@ -793,7 +784,6 @@ static void ray_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	ray_dev_t *local = netdev_priv(dev);
-	int i;
 
 	dev_dbg(&link->dev, "ray_release\n");
 
@@ -802,13 +792,6 @@ static void ray_release(struct pcmcia_device *link)
 	iounmap(local->sram);
 	iounmap(local->rmem);
 	iounmap(local->amem);
-	/* Do bother checking to see if these succeed or not */
-	i = pcmcia_release_window(link, local->amem_handle);
-	if (i != 0)
-		dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
-	i = pcmcia_release_window(link, local->rmem_handle);
-	if (i != 0)
-		dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
 	pcmcia_disable_device(link);
 
 	dev_dbg(&link->dev, "ray_release ending\n");
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 19b262e1ddb..63c2cc408e1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -240,16 +240,16 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	struct rt2x00_dev *rt2x00dev;
 	int retval;
 
-	retval = pci_request_regions(pci_dev, pci_name(pci_dev));
+	retval = pci_enable_device(pci_dev);
 	if (retval) {
-		ERROR_PROBE("PCI request regions failed.\n");
+		ERROR_PROBE("Enable device failed.\n");
 		return retval;
 	}
 
-	retval = pci_enable_device(pci_dev);
+	retval = pci_request_regions(pci_dev, pci_name(pci_dev));
 	if (retval) {
-		ERROR_PROBE("Enable device failed.\n");
-		goto exit_release_regions;
+		ERROR_PROBE("PCI request regions failed.\n");
+		goto exit_disable_device;
 	}
 
 	pci_set_master(pci_dev);
@@ -260,14 +260,14 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	if (dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32))) {
 		ERROR_PROBE("PCI DMA not supported.\n");
 		retval = -EIO;
-		goto exit_disable_device;
+		goto exit_release_regions;
 	}
 
 	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
 	if (!hw) {
 		ERROR_PROBE("Failed to allocate hardware.\n");
 		retval = -ENOMEM;
-		goto exit_disable_device;
+		goto exit_release_regions;
 	}
 
 	pci_set_drvdata(pci_dev, hw);
@@ -300,13 +300,12 @@ exit_free_reg:
 exit_free_device:
 	ieee80211_free_hw(hw);
 
-exit_disable_device:
-	if (retval != -EBUSY)
-		pci_disable_device(pci_dev);
-
 exit_release_regions:
 	pci_release_regions(pci_dev);
 
+exit_disable_device:
+	pci_disable_device(pci_dev);
+
 	pci_set_drvdata(pci_dev, NULL);
 
 	return retval;
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 1d8178563d7..b50c39aaec0 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -695,6 +695,8 @@ static void rtl8180_beacon_work(struct work_struct *work)
 
 	/* grab a fresh beacon */
 	skb = ieee80211_beacon_get(dev, vif);
+	if (!skb)
+		goto resched;
 
 	/*
 	 * update beacon timestamp w/ TSF value
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 96d25fb5049..4cb99c541e2 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -160,9 +160,8 @@ static void wl1271_spi_init(struct wl1271 *wl)
 	spi_message_add_tail(&t, &m);
 
 	spi_sync(wl_to_spi(wl), &m);
-	kfree(cmd);
-
 	wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
+	kfree(cmd);
 }
 
 #define WL1271_BUSY_WORD_TIMEOUT 1000
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 376c6b964a9..a1cc2d498a1 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -89,13 +88,6 @@
 static int wl3501_config(struct pcmcia_device *link);
 static void wl3501_release(struct pcmcia_device *link);
 
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card configuration
- * database.
- */
-static dev_info_t wl3501_dev_info = "wl3501_cs";
-
 static const struct {
 	int reg_domain;
 	int min, max, deflt;
@@ -1421,7 +1413,7 @@ static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev)
 
 static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 {
-	strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
+	strlcpy(info->driver, "wl3501_cs", sizeof(info->driver));
 }
 
 static const struct ethtool_ops ops = {
@@ -1892,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	struct wl3501_card *this;
 
 	/* The io structure describes IO port mapping */
-	p_dev->io.NumPorts1	= 16;
-	p_dev->io.Attributes1	= IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines	= 5;
+	p_dev->resource[0]->end	= 16;
+	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
 	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
@@ -1940,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link)
 	/* Try allocating IO ports.  This tries a few fixed addresses.  If you
 	 * want, you can also read the card's config table to pick addresses --
 	 * see the serial driver for an example. */
+	link->io_lines = 5;
 
 	for (j = 0x280; j < 0x400; j += 0x20) {
 		/* The '^0x300' is so that we probe 0x300-0x3ff first, then
 		 * 0x200-0x2ff, and so on, because this seems safer */
-		link->io.BasePort1 = j;
-		link->io.BasePort2 = link->io.BasePort1 + 0x10;
-		i = pcmcia_request_io(link, &link->io);
+		link->resource[0]->start = j;
+		link->resource[1]->start = link->resource[0]->start + 0x10;
+		i = pcmcia_request_io(link);
 		if (i == 0)
 			break;
 	}
@@ -1968,7 +1960,7 @@ static int wl3501_config(struct pcmcia_device *link)
 		goto failed;
 
 	dev->irq = link->irq;
-	dev->base_addr = link->io.BasePort1;
+	dev->base_addr = link->resource[0]->start;
 	SET_NETDEV_DEV(dev, &link->dev);
 	if (register_netdev(dev)) {
 		printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index d04c5b26205..b2c2f391b29 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -20,7 +20,7 @@
 #include <linux/skbuff.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_mdio.h>
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 7cecc8fea9b..6acbff389ab 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -1,35 +1,61 @@
-config OF_FLATTREE
+config DTC
+	bool
+
+config OF
 	bool
+
+menu "Flattened Device Tree and Open Firmware support"
 	depends on OF
 
+config PROC_DEVICETREE
+	bool "Support for device tree in /proc"
+	depends on PROC_FS && !SPARC
+	help
+	  This option adds a device-tree directory under /proc which contains
+	  an image of the device tree that the kernel copies from Open
+	  Firmware or other boot firmware. If unsure, say Y here.
+
+config OF_FLATTREE
+	bool
+	select DTC
+
 config OF_DYNAMIC
 	def_bool y
-	depends on OF && PPC_OF
+	depends on PPC_OF
+
+config OF_ADDRESS
+	def_bool y
+	depends on !SPARC
+
+config OF_IRQ
+	def_bool y
+	depends on !SPARC
 
 config OF_DEVICE
 	def_bool y
-	depends on OF && (SPARC || PPC_OF || MICROBLAZE)
 
 config OF_GPIO
 	def_bool y
-	depends on OF && (PPC_OF || MICROBLAZE) && GPIOLIB
+	depends on GPIOLIB && !SPARC
 	help
 	  OpenFirmware GPIO accessors
 
 config OF_I2C
 	def_tristate I2C
-	depends on (PPC_OF || MICROBLAZE) && I2C
+	depends on I2C && !SPARC
 	help
 	  OpenFirmware I2C accessors
 
 config OF_SPI
 	def_tristate SPI
-	depends on OF && (PPC_OF || MICROBLAZE) && SPI
+	depends on SPI && !SPARC
 	help
 	  OpenFirmware SPI accessors
 
 config OF_MDIO
 	def_tristate PHYLIB
-	depends on OF && PHYLIB
+	depends on PHYLIB
 	help
 	  OpenFirmware MDIO bus (Ethernet PHY) accessors
+
+endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index f232cc98ce0..0052c405463 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,5 +1,7 @@
 obj-y = base.o
 obj-$(CONFIG_OF_FLATTREE) += fdt.o
+obj-$(CONFIG_OF_ADDRESS)  += address.o
+obj-$(CONFIG_OF_IRQ)    += irq.o
 obj-$(CONFIG_OF_DEVICE) += device.o platform.o
 obj-$(CONFIG_OF_GPIO)   += gpio.o
 obj-$(CONFIG_OF_I2C)	+= of_i2c.o
diff --git a/drivers/of/address.c b/drivers/of/address.c
new file mode 100644
index 00000000000..fcadb726d4f
--- /dev/null
+++ b/drivers/of/address.c
@@ -0,0 +1,595 @@
+
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/pci_regs.h>
+#include <linux/string.h>
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS	4
+#define OF_CHECK_COUNTS(na, ns)	((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+			(ns) > 0)
+
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
+				    u64 size, unsigned int flags,
+				    struct resource *r);
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+	printk(KERN_DEBUG "%s", s);
+	while (na--)
+		printk(" %08x", be32_to_cpu(*(addr++)));
+	printk("\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+	const char	*name;
+	const char	*addresses;
+	int		(*match)(struct device_node *parent);
+	void		(*count_cells)(struct device_node *child,
+				       int *addrc, int *sizec);
+	u64		(*map)(u32 *addr, const u32 *range,
+				int na, int ns, int pna);
+	int		(*translate)(u32 *addr, u64 offset, int na);
+	unsigned int	(*get_flags)(const u32 *addr);
+};
+
+/*
+ * Default translator (generic bus)
+ */
+
+static void of_bus_default_count_cells(struct device_node *dev,
+				       int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = of_n_addr_cells(dev);
+	if (sizec)
+		*sizec = of_n_size_cells(dev);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+		int na, int ns, int pna)
+{
+	u64 cp, s, da;
+
+	cp = of_read_number(range, na);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr, na);
+
+	pr_debug("OF: default map, cp=%llx, s=%llx, da=%llx\n",
+		 (unsigned long long)cp, (unsigned long long)s,
+		 (unsigned long long)da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+	u64 a = of_read_number(addr, na);
+	memset(addr, 0, na * 4);
+	a += offset;
+	if (na > 1)
+		addr[na - 2] = cpu_to_be32(a >> 32);
+	addr[na - 1] = cpu_to_be32(a & 0xffffffffu);
+
+	return 0;
+}
+
+static unsigned int of_bus_default_get_flags(const u32 *addr)
+{
+	return IORESOURCE_MEM;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * PCI bus specific translator
+ */
+
+static int of_bus_pci_match(struct device_node *np)
+{
+	/* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
+	return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
+}
+
+static void of_bus_pci_count_cells(struct device_node *np,
+				   int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 3;
+	if (sizec)
+		*sizec = 2;
+}
+
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
+static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+	u64 cp, s, da;
+	unsigned int af, rf;
+
+	af = of_bus_pci_get_flags(addr);
+	rf = of_bus_pci_get_flags(range);
+
+	/* Check address type match */
+	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
+		return OF_BAD_ADDR;
+
+	/* Read address values, skipping high cell */
+	cp = of_read_number(range + 1, na - 1);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr + 1, na - 1);
+
+	pr_debug("OF: PCI map, cp=%llx, s=%llx, da=%llx\n",
+		 (unsigned long long)cp, (unsigned long long)s,
+		 (unsigned long long)da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
+{
+	return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+			unsigned int *flags)
+{
+	const u32 *prop;
+	unsigned int psize;
+	struct device_node *parent;
+	struct of_bus *bus;
+	int onesize, i, na, ns;
+
+	/* Get parent & match bus type */
+	parent = of_get_parent(dev);
+	if (parent == NULL)
+		return NULL;
+	bus = of_match_bus(parent);
+	if (strcmp(bus->name, "pci")) {
+		of_node_put(parent);
+		return NULL;
+	}
+	bus->count_cells(dev, &na, &ns);
+	of_node_put(parent);
+	if (!OF_CHECK_COUNTS(na, ns))
+		return NULL;
+
+	/* Get "reg" or "assigned-addresses" property */
+	prop = of_get_property(dev, bus->addresses, &psize);
+	if (prop == NULL)
+		return NULL;
+	psize /= 4;
+
+	onesize = na + ns;
+	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) {
+		u32 val = be32_to_cpu(prop[0]);
+		if ((val & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+			if (size)
+				*size = of_read_number(prop + na, ns);
+			if (flags)
+				*flags = bus->get_flags(prop);
+			return prop;
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+			       struct resource *r)
+{
+	const u32	*addrp;
+	u64		size;
+	unsigned int	flags;
+
+	addrp = of_get_pci_address(dev, bar, &size, &flags);
+	if (addrp == NULL)
+		return -EINVAL;
+	return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+#endif /* CONFIG_PCI */
+
+/*
+ * ISA bus specific translator
+ */
+
+static int of_bus_isa_match(struct device_node *np)
+{
+	return !strcmp(np->name, "isa");
+}
+
+static void of_bus_isa_count_cells(struct device_node *child,
+				   int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 2;
+	if (sizec)
+		*sizec = 1;
+}
+
+static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+	u64 cp, s, da;
+
+	/* Check address type match */
+	if ((addr[0] ^ range[0]) & 0x00000001)
+		return OF_BAD_ADDR;
+
+	/* Read address values, skipping high cell */
+	cp = of_read_number(range + 1, na - 1);
+	s  = of_read_number(range + na + pna, ns);
+	da = of_read_number(addr + 1, na - 1);
+
+	pr_debug("OF: ISA map, cp=%llx, s=%llx, da=%llx\n",
+		 (unsigned long long)cp, (unsigned long long)s,
+		 (unsigned long long)da);
+
+	if (da < cp || da >= (cp + s))
+		return OF_BAD_ADDR;
+	return da - cp;
+}
+
+static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
+{
+	return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_isa_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	if (w & 1)
+		flags |= IORESOURCE_IO;
+	else
+		flags |= IORESOURCE_MEM;
+	return flags;
+}
+
+/*
+ * Array of bus specific translators
+ */
+
+static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
+	/* PCI */
+	{
+		.name = "pci",
+		.addresses = "assigned-addresses",
+		.match = of_bus_pci_match,
+		.count_cells = of_bus_pci_count_cells,
+		.map = of_bus_pci_map,
+		.translate = of_bus_pci_translate,
+		.get_flags = of_bus_pci_get_flags,
+	},
+#endif /* CONFIG_PCI */
+	/* ISA */
+	{
+		.name = "isa",
+		.addresses = "reg",
+		.match = of_bus_isa_match,
+		.count_cells = of_bus_isa_count_cells,
+		.map = of_bus_isa_map,
+		.translate = of_bus_isa_translate,
+		.get_flags = of_bus_isa_get_flags,
+	},
+	/* Default */
+	{
+		.name = "default",
+		.addresses = "reg",
+		.match = NULL,
+		.count_cells = of_bus_default_count_cells,
+		.map = of_bus_default_map,
+		.translate = of_bus_default_translate,
+		.get_flags = of_bus_default_get_flags,
+	},
+};
+
+static struct of_bus *of_match_bus(struct device_node *np)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(of_busses); i++)
+		if (!of_busses[i].match || of_busses[i].match(np))
+			return &of_busses[i];
+	BUG();
+	return NULL;
+}
+
+static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+			    struct of_bus *pbus, u32 *addr,
+			    int na, int ns, int pna, const char *rprop)
+{
+	const u32 *ranges;
+	unsigned int rlen;
+	int rone;
+	u64 offset = OF_BAD_ADDR;
+
+	/* Normally, an absence of a "ranges" property means we are
+	 * crossing a non-translatable boundary, and thus the addresses
+	 * below the current not cannot be converted to CPU physical ones.
+	 * Unfortunately, while this is very clear in the spec, it's not
+	 * what Apple understood, and they do have things like /uni-n or
+	 * /ht nodes with no "ranges" property and a lot of perfectly
+	 * useable mapped devices below them. Thus we treat the absence of
+	 * "ranges" as equivalent to an empty "ranges" property which means
+	 * a 1:1 translation at that level. It's up to the caller not to try
+	 * to translate addresses that aren't supposed to be translated in
+	 * the first place. --BenH.
+	 *
+	 * As far as we know, this damage only exists on Apple machines, so
+	 * This code is only enabled on powerpc. --gcl
+	 */
+	ranges = of_get_property(parent, rprop, &rlen);
+#if !defined(CONFIG_PPC)
+	if (ranges == NULL) {
+		pr_err("OF: no ranges; cannot translate\n");
+		return 1;
+	}
+#endif /* !defined(CONFIG_PPC) */
+	if (ranges == NULL || rlen == 0) {
+		offset = of_read_number(addr, na);
+		memset(addr, 0, pna * 4);
+		pr_debug("OF: empty ranges; 1:1 translation\n");
+		goto finish;
+	}
+
+	pr_debug("OF: walking ranges...\n");
+
+	/* Now walk through the ranges */
+	rlen /= 4;
+	rone = na + pna + ns;
+	for (; rlen >= rone; rlen -= rone, ranges += rone) {
+		offset = bus->map(addr, ranges, na, ns, pna);
+		if (offset != OF_BAD_ADDR)
+			break;
+	}
+	if (offset == OF_BAD_ADDR) {
+		pr_debug("OF: not found !\n");
+		return 1;
+	}
+	memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+	of_dump_addr("OF: parent translation for:", addr, pna);
+	pr_debug("OF: with offset: %llx\n", (unsigned long long)offset);
+
+	/* Translate it into parent bus space */
+	return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 __of_translate_address(struct device_node *dev, const u32 *in_addr,
+			   const char *rprop)
+{
+	struct device_node *parent = NULL;
+	struct of_bus *bus, *pbus;
+	u32 addr[OF_MAX_ADDR_CELLS];
+	int na, ns, pna, pns;
+	u64 result = OF_BAD_ADDR;
+
+	pr_debug("OF: ** translation for device %s **\n", dev->full_name);
+
+	/* Increase refcount at current level */
+	of_node_get(dev);
+
+	/* Get parent & match bus type */
+	parent = of_get_parent(dev);
+	if (parent == NULL)
+		goto bail;
+	bus = of_match_bus(parent);
+
+	/* Cound address cells & copy address locally */
+	bus->count_cells(dev, &na, &ns);
+	if (!OF_CHECK_COUNTS(na, ns)) {
+		printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+		       dev->full_name);
+		goto bail;
+	}
+	memcpy(addr, in_addr, na * 4);
+
+	pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+	    bus->name, na, ns, parent->full_name);
+	of_dump_addr("OF: translating address:", addr, na);
+
+	/* Translate */
+	for (;;) {
+		/* Switch to parent bus */
+		of_node_put(dev);
+		dev = parent;
+		parent = of_get_parent(dev);
+
+		/* If root, we have finished */
+		if (parent == NULL) {
+			pr_debug("OF: reached root node\n");
+			result = of_read_number(addr, na);
+			break;
+		}
+
+		/* Get new parent bus and counts */
+		pbus = of_match_bus(parent);
+		pbus->count_cells(dev, &pna, &pns);
+		if (!OF_CHECK_COUNTS(pna, pns)) {
+			printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+			       dev->full_name);
+			break;
+		}
+
+		pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+		    pbus->name, pna, pns, parent->full_name);
+
+		/* Apply bus translation */
+		if (of_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop))
+			break;
+
+		/* Complete the move up one level */
+		na = pna;
+		ns = pns;
+		bus = pbus;
+
+		of_dump_addr("OF: one level translation:", addr, na);
+	}
+ bail:
+	of_node_put(parent);
+	of_node_put(dev);
+
+	return result;
+}
+
+u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+{
+	return __of_translate_address(dev, in_addr, "ranges");
+}
+EXPORT_SYMBOL(of_translate_address);
+
+u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr)
+{
+	return __of_translate_address(dev, in_addr, "dma-ranges");
+}
+EXPORT_SYMBOL(of_translate_dma_address);
+
+const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
+		    unsigned int *flags)
+{
+	const u32 *prop;
+	unsigned int psize;
+	struct device_node *parent;
+	struct of_bus *bus;
+	int onesize, i, na, ns;
+
+	/* Get parent & match bus type */
+	parent = of_get_parent(dev);
+	if (parent == NULL)
+		return NULL;
+	bus = of_match_bus(parent);
+	bus->count_cells(dev, &na, &ns);
+	of_node_put(parent);
+	if (!OF_CHECK_COUNTS(na, ns))
+		return NULL;
+
+	/* Get "reg" or "assigned-addresses" property */
+	prop = of_get_property(dev, bus->addresses, &psize);
+	if (prop == NULL)
+		return NULL;
+	psize /= 4;
+
+	onesize = na + ns;
+	for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+		if (i == index) {
+			if (size)
+				*size = of_read_number(prop + na, ns);
+			if (flags)
+				*flags = bus->get_flags(prop);
+			return prop;
+		}
+	return NULL;
+}
+EXPORT_SYMBOL(of_get_address);
+
+static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
+				    u64 size, unsigned int flags,
+				    struct resource *r)
+{
+	u64 taddr;
+
+	if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
+		return -EINVAL;
+	taddr = of_translate_address(dev, addrp);
+	if (taddr == OF_BAD_ADDR)
+		return -EINVAL;
+	memset(r, 0, sizeof(struct resource));
+	if (flags & IORESOURCE_IO) {
+		unsigned long port;
+		port = pci_address_to_pio(taddr);
+		if (port == (unsigned long)-1)
+			return -EINVAL;
+		r->start = port;
+		r->end = port + size - 1;
+	} else {
+		r->start = taddr;
+		r->end = taddr + size - 1;
+	}
+	r->flags = flags;
+	r->name = dev->full_name;
+	return 0;
+}
+
+/**
+ * of_address_to_resource - Translate device tree address and return as resource
+ *
+ * Note that if your address is a PIO address, the conversion will fail if
+ * the physical address can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early or it
+ * can't be matched to any host bridge IO space
+ */
+int of_address_to_resource(struct device_node *dev, int index,
+			   struct resource *r)
+{
+	const u32	*addrp;
+	u64		size;
+	unsigned int	flags;
+
+	addrp = of_get_address(dev, index, &size, &flags);
+	if (addrp == NULL)
+		return -EINVAL;
+	return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_address_to_resource);
+
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device:	the device whose io range will be mapped
+ * @index:	index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+void __iomem *of_iomap(struct device_node *np, int index)
+{
+	struct resource res;
+
+	if (of_address_to_resource(np, index, &res))
+		return NULL;
+
+	return ioremap(res.start, 1 + res.end - res.start);
+}
+EXPORT_SYMBOL(of_iomap);
diff --git a/drivers/of/base.c b/drivers/of/base.c
index b5ad9740d8b..aa805250de7 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -545,74 +545,28 @@ struct device_node *of_find_matching_node(struct device_node *from,
 EXPORT_SYMBOL(of_find_matching_node);
 
 /**
- * of_modalias_table: Table of explicit compatible ==> modalias mappings
- *
- * This table allows particulare compatible property values to be mapped
- * to modalias strings.  This is useful for busses which do not directly
- * understand the OF device tree but are populated based on data contained
- * within the device tree.  SPI and I2C are the two current users of this
- * table.
- *
- * In most cases, devices do not need to be listed in this table because
- * the modalias value can be derived directly from the compatible table.
- * However, if for any reason a value cannot be derived, then this table
- * provides a method to override the implicit derivation.
- *
- * At the moment, a single table is used for all bus types because it is
- * assumed that the data size is small and that the compatible values
- * should already be distinct enough to differentiate between SPI, I2C
- * and other devices.
- */
-struct of_modalias_table {
-	char *of_device;
-	char *modalias;
-};
-static struct of_modalias_table of_modalias_table[] = {
-	{ "fsl,mcu-mpc8349emitx", "mcu-mpc8349emitx" },
-	{ "mmc-spi-slot", "mmc_spi" },
-};
-
-/**
  * of_modalias_node - Lookup appropriate modalias for a device node
  * @node:	pointer to a device tree node
  * @modalias:	Pointer to buffer that modalias value will be copied into
  * @len:	Length of modalias value
  *
- * Based on the value of the compatible property, this routine will determine
- * an appropriate modalias value for a particular device tree node.  Two
- * separate methods are attempted to derive a modalias value.
+ * Based on the value of the compatible property, this routine will attempt
+ * to choose an appropriate modalias value for a particular device tree node.
+ * It does this by stripping the manufacturer prefix (as delimited by a ',')
+ * from the first entry in the compatible list property.
  *
- * First method is to lookup the compatible value in of_modalias_table.
- * Second is to strip off the manufacturer prefix from the first
- * compatible entry and use the remainder as modalias
- *
- * This routine returns 0 on success
+ * This routine returns 0 on success, <0 on failure.
  */
 int of_modalias_node(struct device_node *node, char *modalias, int len)
 {
-	int i, cplen;
-	const char *compatible;
-	const char *p;
-
-	/* 1. search for exception list entry */
-	for (i = 0; i < ARRAY_SIZE(of_modalias_table); i++) {
-		compatible = of_modalias_table[i].of_device;
-		if (!of_device_is_compatible(node, compatible))
-			continue;
-		strlcpy(modalias, of_modalias_table[i].modalias, len);
-		return 0;
-	}
+	const char *compatible, *p;
+	int cplen;
 
 	compatible = of_get_property(node, "compatible", &cplen);
-	if (!compatible)
+	if (!compatible || strlen(compatible) > cplen)
 		return -ENODEV;
-
-	/* 2. take first compatible entry and strip manufacturer */
 	p = strchr(compatible, ',');
-	if (!p)
-		return -ENODEV;
-	p++;
-	strlcpy(modalias, p, len);
+	strlcpy(modalias, p ? p + 1 : compatible, len);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(of_modalias_node);
@@ -651,14 +605,14 @@ EXPORT_SYMBOL(of_find_node_by_phandle);
 struct device_node *
 of_parse_phandle(struct device_node *np, const char *phandle_name, int index)
 {
-	const phandle *phandle;
+	const __be32 *phandle;
 	int size;
 
 	phandle = of_get_property(np, phandle_name, &size);
 	if ((!phandle) || (size < sizeof(*phandle) * (index + 1)))
 		return NULL;
 
-	return of_find_node_by_phandle(phandle[index]);
+	return of_find_node_by_phandle(be32_to_cpup(phandle + index));
 }
 EXPORT_SYMBOL(of_parse_phandle);
 
@@ -714,16 +668,16 @@ int of_parse_phandles_with_args(struct device_node *np, const char *list_name,
 
 	while (list < list_end) {
 		const __be32 *cells;
-		const phandle *phandle;
+		phandle phandle;
 
-		phandle = list++;
+		phandle = be32_to_cpup(list++);
 		args = list;
 
 		/* one cell hole in the list = <>; */
-		if (!*phandle)
+		if (!phandle)
 			goto next;
 
-		node = of_find_node_by_phandle(*phandle);
+		node = of_find_node_by_phandle(phandle);
 		if (!node) {
 			pr_debug("%s: could not find phandle\n",
 				 np->full_name);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 7d18f8e0b01..0d8a0644f54 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -20,13 +20,13 @@
 const struct of_device_id *of_match_device(const struct of_device_id *matches,
 					   const struct device *dev)
 {
-	if (!dev->of_node)
+	if ((!matches) || (!dev->of_node))
 		return NULL;
 	return of_match_node(matches, dev->of_node);
 }
 EXPORT_SYMBOL(of_match_device);
 
-struct of_device *of_dev_get(struct of_device *dev)
+struct platform_device *of_dev_get(struct platform_device *dev)
 {
 	struct device *tmp;
 
@@ -34,13 +34,13 @@ struct of_device *of_dev_get(struct of_device *dev)
 		return NULL;
 	tmp = get_device(&dev->dev);
 	if (tmp)
-		return to_of_device(tmp);
+		return to_platform_device(tmp);
 	else
 		return NULL;
 }
 EXPORT_SYMBOL(of_dev_get);
 
-void of_dev_put(struct of_device *dev)
+void of_dev_put(struct platform_device *dev)
 {
 	if (dev)
 		put_device(&dev->dev);
@@ -50,28 +50,25 @@ EXPORT_SYMBOL(of_dev_put);
 static ssize_t devspec_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 
-	ofdev = to_of_device(dev);
+	ofdev = to_platform_device(dev);
 	return sprintf(buf, "%s\n", ofdev->dev.of_node->full_name);
 }
 
 static ssize_t name_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 
-	ofdev = to_of_device(dev);
+	ofdev = to_platform_device(dev);
 	return sprintf(buf, "%s\n", ofdev->dev.of_node->name);
 }
 
 static ssize_t modalias_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct of_device *ofdev = to_of_device(dev);
-	ssize_t len = 0;
-
-	len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2);
+	ssize_t len = of_device_get_modalias(dev, buf, PAGE_SIZE - 2);
 	buf[len] = '\n';
 	buf[len+1] = 0;
 	return len+1;
@@ -93,20 +90,25 @@ struct device_attribute of_platform_device_attrs[] = {
  */
 void of_release_dev(struct device *dev)
 {
-	struct of_device *ofdev;
+	struct platform_device *ofdev;
 
-	ofdev = to_of_device(dev);
+	ofdev = to_platform_device(dev);
 	of_node_put(ofdev->dev.of_node);
 	kfree(ofdev);
 }
 EXPORT_SYMBOL(of_release_dev);
 
-int of_device_register(struct of_device *ofdev)
+int of_device_register(struct platform_device *ofdev)
 {
 	BUG_ON(ofdev->dev.of_node == NULL);
 
 	device_initialize(&ofdev->dev);
 
+	/* name and id have to be set so that the platform bus doesn't get
+	 * confused on matching */
+	ofdev->name = dev_name(&ofdev->dev);
+	ofdev->id = -1;
+
 	/* device_add will assume that this device is on the same node as
 	 * the parent. If there is no parent defined, set the node
 	 * explicitly */
@@ -117,25 +119,24 @@ int of_device_register(struct of_device *ofdev)
 }
 EXPORT_SYMBOL(of_device_register);
 
-void of_device_unregister(struct of_device *ofdev)
+void of_device_unregister(struct platform_device *ofdev)
 {
 	device_unregister(&ofdev->dev);
 }
 EXPORT_SYMBOL(of_device_unregister);
 
-ssize_t of_device_get_modalias(struct of_device *ofdev,
-				char *str, ssize_t len)
+ssize_t of_device_get_modalias(struct device *dev, char *str, ssize_t len)
 {
 	const char *compat;
 	int cplen, i;
 	ssize_t tsize, csize, repend;
 
 	/* Name & Type */
-	csize = snprintf(str, len, "of:N%sT%s", ofdev->dev.of_node->name,
-			 ofdev->dev.of_node->type);
+	csize = snprintf(str, len, "of:N%sT%s", dev->of_node->name,
+			 dev->of_node->type);
 
 	/* Get compatible property if any */
-	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
+	compat = of_get_property(dev->of_node, "compatible", &cplen);
 	if (!compat)
 		return csize;
 
@@ -170,3 +171,51 @@ ssize_t of_device_get_modalias(struct of_device *ofdev,
 
 	return tsize;
 }
+
+/**
+ * of_device_uevent - Display OF related uevent information
+ */
+int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	const char *compat;
+	int seen = 0, cplen, sl;
+
+	if ((!dev) || (!dev->of_node))
+		return -ENODEV;
+
+	if (add_uevent_var(env, "OF_NAME=%s", dev->of_node->name))
+		return -ENOMEM;
+
+	if (add_uevent_var(env, "OF_TYPE=%s", dev->of_node->type))
+		return -ENOMEM;
+
+	/* Since the compatible field can contain pretty much anything
+	 * it's not really legal to split it out with commas. We split it
+	 * up using a number of environment variables instead. */
+
+	compat = of_get_property(dev->of_node, "compatible", &cplen);
+	while (compat && *compat && cplen > 0) {
+		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
+			return -ENOMEM;
+
+		sl = strlen(compat) + 1;
+		compat += sl;
+		cplen -= sl;
+		seen++;
+	}
+
+	if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
+		return -ENOMEM;
+
+	/* modalias is trickier, we add it in 2 steps */
+	if (add_uevent_var(env, "MODALIAS="))
+		return -ENOMEM;
+
+	sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
+				    sizeof(env->buf) - env->buflen);
+	if (sl >= (sizeof(env->buf) - env->buflen))
+		return -ENOMEM;
+	env->buflen += sl;
+
+	return 0;
+}
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index b6987bba855..65da5aec755 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -69,9 +69,9 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
 			u32 sz = be32_to_cpup((__be32 *)p);
 			p += 8;
 			if (be32_to_cpu(initial_boot_params->version) < 0x10)
-				p = _ALIGN(p, sz >= 8 ? 8 : 4);
+				p = ALIGN(p, sz >= 8 ? 8 : 4);
 			p += sz;
-			p = _ALIGN(p, 4);
+			p = ALIGN(p, 4);
 			continue;
 		}
 		if (tag != OF_DT_BEGIN_NODE) {
@@ -80,7 +80,7 @@ int __init of_scan_flat_dt(int (*it)(unsigned long node,
 		}
 		depth++;
 		pathp = (char *)p;
-		p = _ALIGN(p + strlen(pathp) + 1, 4);
+		p = ALIGN(p + strlen(pathp) + 1, 4);
 		if ((*pathp) == '/') {
 			char *lp, *np;
 			for (lp = NULL, np = pathp; *np; np++)
@@ -109,7 +109,7 @@ unsigned long __init of_get_flat_dt_root(void)
 		p += 4;
 	BUG_ON(be32_to_cpup((__be32 *)p) != OF_DT_BEGIN_NODE);
 	p += 4;
-	return _ALIGN(p + strlen((char *)p) + 1, 4);
+	return ALIGN(p + strlen((char *)p) + 1, 4);
 }
 
 /**
@@ -138,7 +138,7 @@ void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
 		noff = be32_to_cpup((__be32 *)(p + 4));
 		p += 8;
 		if (be32_to_cpu(initial_boot_params->version) < 0x10)
-			p = _ALIGN(p, sz >= 8 ? 8 : 4);
+			p = ALIGN(p, sz >= 8 ? 8 : 4);
 
 		nstr = find_flat_dt_string(noff);
 		if (nstr == NULL) {
@@ -151,7 +151,7 @@ void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
 			return (void *)p;
 		}
 		p += sz;
-		p = _ALIGN(p, 4);
+		p = ALIGN(p, 4);
 	} while (1);
 }
 
@@ -169,7 +169,7 @@ int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
 	if (cp == NULL)
 		return 0;
 	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
+		if (of_compat_cmp(cp, compat, strlen(compat)) == 0)
 			return 1;
 		l = strlen(cp) + 1;
 		cp += l;
@@ -184,7 +184,7 @@ static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
 {
 	void *res;
 
-	*mem = _ALIGN(*mem, align);
+	*mem = ALIGN(*mem, align);
 	res = (void *)*mem;
 	*mem += size;
 
@@ -220,7 +220,7 @@ unsigned long __init unflatten_dt_node(unsigned long mem,
 	*p += 4;
 	pathp = (char *)*p;
 	l = allocl = strlen(pathp) + 1;
-	*p = _ALIGN(*p + l, 4);
+	*p = ALIGN(*p + l, 4);
 
 	/* version 0x10 has a more compact unit name here instead of the full
 	 * path. we accumulate the full path size using "fpsize", we'll rebuild
@@ -299,7 +299,7 @@ unsigned long __init unflatten_dt_node(unsigned long mem,
 		noff = be32_to_cpup((__be32 *)((*p) + 4));
 		*p += 8;
 		if (be32_to_cpu(initial_boot_params->version) < 0x10)
-			*p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+			*p = ALIGN(*p, sz >= 8 ? 8 : 4);
 
 		pname = find_flat_dt_string(noff);
 		if (pname == NULL) {
@@ -320,20 +320,20 @@ unsigned long __init unflatten_dt_node(unsigned long mem,
 			if ((strcmp(pname, "phandle") == 0) ||
 			    (strcmp(pname, "linux,phandle") == 0)) {
 				if (np->phandle == 0)
-					np->phandle = *((u32 *)*p);
+					np->phandle = be32_to_cpup((__be32*)*p);
 			}
 			/* And we process the "ibm,phandle" property
 			 * used in pSeries dynamic device tree
 			 * stuff */
 			if (strcmp(pname, "ibm,phandle") == 0)
-				np->phandle = *((u32 *)*p);
+				np->phandle = be32_to_cpup((__be32 *)*p);
 			pp->name = pname;
 			pp->length = sz;
 			pp->value = (void *)*p;
 			*prev_pp = pp;
 			prev_pp = &pp->next;
 		}
-		*p = _ALIGN((*p) + sz, 4);
+		*p = ALIGN((*p) + sz, 4);
 	}
 	/* with version 0x10 we may not have the name property, recreate
 	 * it here from the unit name if absent
diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c
index a1b31a4abae..905960338fb 100644
--- a/drivers/of/gpio.c
+++ b/drivers/of/gpio.c
@@ -11,13 +11,14 @@
  * (at your option) any later version.
  */
 
-#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/slab.h>
+#include <linux/of_address.h>
 #include <linux/of_gpio.h>
-#include <asm/prom.h>
+#include <linux/slab.h>
 
 /**
  * of_get_gpio_flags - Get a GPIO number and flags to use with GPIO API
@@ -33,32 +34,32 @@ int of_get_gpio_flags(struct device_node *np, int index,
 		      enum of_gpio_flags *flags)
 {
 	int ret;
-	struct device_node *gc;
-	struct of_gpio_chip *of_gc = NULL;
+	struct device_node *gpio_np;
+	struct gpio_chip *gc;
 	int size;
 	const void *gpio_spec;
 	const __be32 *gpio_cells;
 
 	ret = of_parse_phandles_with_args(np, "gpios", "#gpio-cells", index,
-					  &gc, &gpio_spec);
+					  &gpio_np, &gpio_spec);
 	if (ret) {
 		pr_debug("%s: can't parse gpios property\n", __func__);
 		goto err0;
 	}
 
-	of_gc = gc->data;
-	if (!of_gc) {
+	gc = of_node_to_gpiochip(gpio_np);
+	if (!gc) {
 		pr_debug("%s: gpio controller %s isn't registered\n",
-			 np->full_name, gc->full_name);
+			 np->full_name, gpio_np->full_name);
 		ret = -ENODEV;
 		goto err1;
 	}
 
-	gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+	gpio_cells = of_get_property(gpio_np, "#gpio-cells", &size);
 	if (!gpio_cells || size != sizeof(*gpio_cells) ||
-			be32_to_cpup(gpio_cells) != of_gc->gpio_cells) {
+			be32_to_cpup(gpio_cells) != gc->of_gpio_n_cells) {
 		pr_debug("%s: wrong #gpio-cells for %s\n",
-			 np->full_name, gc->full_name);
+			 np->full_name, gpio_np->full_name);
 		ret = -EINVAL;
 		goto err1;
 	}
@@ -67,13 +68,13 @@ int of_get_gpio_flags(struct device_node *np, int index,
 	if (flags)
 		*flags = 0;
 
-	ret = of_gc->xlate(of_gc, np, gpio_spec, flags);
+	ret = gc->of_xlate(gc, np, gpio_spec, flags);
 	if (ret < 0)
 		goto err1;
 
-	ret += of_gc->gc.base;
+	ret += gc->base;
 err1:
-	of_node_put(gc);
+	of_node_put(gpio_np);
 err0:
 	pr_debug("%s exited with status %d\n", __func__, ret);
 	return ret;
@@ -116,7 +117,7 @@ EXPORT_SYMBOL(of_gpio_count);
 
 /**
  * of_gpio_simple_xlate - translate gpio_spec to the GPIO number and flags
- * @of_gc:	pointer to the of_gpio_chip structure
+ * @gc:		pointer to the gpio_chip structure
  * @np:		device node of the GPIO chip
  * @gpio_spec:	gpio specifier as found in the device tree
  * @flags:	a flags pointer to fill in
@@ -125,8 +126,8 @@ EXPORT_SYMBOL(of_gpio_count);
  * gpio chips. This function performs only one sanity check: whether gpio
  * is less than ngpios (that is specified in the gpio_chip).
  */
-int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
-			 const void *gpio_spec, enum of_gpio_flags *flags)
+static int of_gpio_simple_xlate(struct gpio_chip *gc, struct device_node *np,
+				const void *gpio_spec, u32 *flags)
 {
 	const __be32 *gpio = gpio_spec;
 	const u32 n = be32_to_cpup(gpio);
@@ -137,12 +138,12 @@ int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
 	 * number and the flags from a single gpio cell -- this is possible,
 	 * but not recommended).
 	 */
-	if (of_gc->gpio_cells < 2) {
+	if (gc->of_gpio_n_cells < 2) {
 		WARN_ON(1);
 		return -EINVAL;
 	}
 
-	if (n > of_gc->gc.ngpio)
+	if (n > gc->ngpio)
 		return -EINVAL;
 
 	if (flags)
@@ -150,7 +151,6 @@ int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
 
 	return n;
 }
-EXPORT_SYMBOL(of_gpio_simple_xlate);
 
 /**
  * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
@@ -161,10 +161,8 @@ EXPORT_SYMBOL(of_gpio_simple_xlate);
  *
  * 1) In the gpio_chip structure:
  *    - all the callbacks
- *
- * 2) In the of_gpio_chip structure:
- *    - gpio_cells
- *    - xlate callback (optional)
+ *    - of_gpio_n_cells
+ *    - of_xlate callback (optional)
  *
  * 3) In the of_mm_gpio_chip structure:
  *    - save_regs callback (optional)
@@ -177,8 +175,7 @@ int of_mm_gpiochip_add(struct device_node *np,
 		       struct of_mm_gpio_chip *mm_gc)
 {
 	int ret = -ENOMEM;
-	struct of_gpio_chip *of_gc = &mm_gc->of_gc;
-	struct gpio_chip *gc = &of_gc->gc;
+	struct gpio_chip *gc = &mm_gc->gc;
 
 	gc->label = kstrdup(np->full_name, GFP_KERNEL);
 	if (!gc->label)
@@ -190,26 +187,19 @@ int of_mm_gpiochip_add(struct device_node *np,
 
 	gc->base = -1;
 
-	if (!of_gc->xlate)
-		of_gc->xlate = of_gpio_simple_xlate;
-
 	if (mm_gc->save_regs)
 		mm_gc->save_regs(mm_gc);
 
-	np->data = of_gc;
+	mm_gc->gc.of_node = np;
 
 	ret = gpiochip_add(gc);
 	if (ret)
 		goto err2;
 
-	/* We don't want to lose the node and its ->data */
-	of_node_get(np);
-
 	pr_debug("%s: registered as generic GPIO chip, base is %d\n",
 		 np->full_name, gc->base);
 	return 0;
 err2:
-	np->data = NULL;
 	iounmap(mm_gc->regs);
 err1:
 	kfree(gc->label);
@@ -219,3 +209,36 @@ err0:
 	return ret;
 }
 EXPORT_SYMBOL(of_mm_gpiochip_add);
+
+void of_gpiochip_add(struct gpio_chip *chip)
+{
+	if ((!chip->of_node) && (chip->dev))
+		chip->of_node = chip->dev->of_node;
+
+	if (!chip->of_node)
+		return;
+
+	if (!chip->of_xlate) {
+		chip->of_gpio_n_cells = 2;
+		chip->of_xlate = of_gpio_simple_xlate;
+	}
+
+	of_node_get(chip->of_node);
+}
+
+void of_gpiochip_remove(struct gpio_chip *chip)
+{
+	if (chip->of_node)
+		of_node_put(chip->of_node);
+}
+
+/* Private function for resolving node pointer to gpio_chip */
+static int of_gpiochip_is_match(struct gpio_chip *chip, void *data)
+{
+	return chip->of_node == data;
+}
+
+struct gpio_chip *of_node_to_gpiochip(struct device_node *np)
+{
+	return gpiochip_find(np, of_gpiochip_is_match);
+}
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
new file mode 100644
index 00000000000..6e595e5a397
--- /dev/null
+++ b/drivers/of/irq.c
@@ -0,0 +1,349 @@
+/*
+ *  Derived from arch/i386/kernel/irq.c
+ *    Copyright (C) 1992 Linus Torvalds
+ *  Adapted from arch/i386 by Gary Thomas
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *  Updated and modified by Cort Dougan <cort@fsmlabs.com>
+ *    Copyright (C) 1996-2001 Cort Dougan
+ *  Adapted for Power Macintosh by Paul Mackerras
+ *    Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file contains the code used to make IRQ descriptions in the
+ * device tree to actual irq numbers on an interrupt controller
+ * driver.
+ */
+
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/string.h>
+
+/**
+ * irq_of_parse_and_map - Parse and map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
+{
+	struct of_irq oirq;
+
+	if (of_irq_map_one(dev, index, &oirq))
+		return NO_IRQ;
+
+	return irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
+
+/**
+ * of_irq_find_parent - Given a device node, find its interrupt parent node
+ * @child: pointer to device node
+ *
+ * Returns a pointer to the interrupt parent node, or NULL if the interrupt
+ * parent could not be determined.
+ */
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+	struct device_node *p;
+	const __be32 *parp;
+
+	if (!of_node_get(child))
+		return NULL;
+
+	do {
+		parp = of_get_property(child, "interrupt-parent", NULL);
+		if (parp == NULL)
+			p = of_get_parent(child);
+		else {
+			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+				p = of_node_get(of_irq_dflt_pic);
+			else
+				p = of_find_node_by_phandle(be32_to_cpup(parp));
+		}
+		of_node_put(child);
+		child = p;
+	} while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+
+	return p;
+}
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ */
+int of_irq_map_raw(struct device_node *parent, const __be32 *intspec,
+		   u32 ointsize, const __be32 *addr, struct of_irq *out_irq)
+{
+	struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+	const __be32 *tmp, *imap, *imask;
+	u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+	int imaplen, match, i;
+
+	pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+		 parent->full_name, be32_to_cpup(intspec),
+		 be32_to_cpup(intspec + 1), ointsize);
+
+	ipar = of_node_get(parent);
+
+	/* First get the #interrupt-cells property of the current cursor
+	 * that tells us how to interpret the passed-in intspec. If there
+	 * is none, we are nice and just walk up the tree
+	 */
+	do {
+		tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+		if (tmp != NULL) {
+			intsize = be32_to_cpu(*tmp);
+			break;
+		}
+		tnode = ipar;
+		ipar = of_irq_find_parent(ipar);
+		of_node_put(tnode);
+	} while (ipar);
+	if (ipar == NULL) {
+		pr_debug(" -> no parent found !\n");
+		goto fail;
+	}
+
+	pr_debug("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
+
+	if (ointsize != intsize)
+		return -EINVAL;
+
+	/* Look for this #address-cells. We have to implement the old linux
+	 * trick of looking for the parent here as some device-trees rely on it
+	 */
+	old = of_node_get(ipar);
+	do {
+		tmp = of_get_property(old, "#address-cells", NULL);
+		tnode = of_get_parent(old);
+		of_node_put(old);
+		old = tnode;
+	} while (old && tmp == NULL);
+	of_node_put(old);
+	old = NULL;
+	addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
+
+	pr_debug(" -> addrsize=%d\n", addrsize);
+
+	/* Now start the actual "proper" walk of the interrupt tree */
+	while (ipar != NULL) {
+		/* Now check if cursor is an interrupt-controller and if it is
+		 * then we are done
+		 */
+		if (of_get_property(ipar, "interrupt-controller", NULL) !=
+				NULL) {
+			pr_debug(" -> got it !\n");
+			for (i = 0; i < intsize; i++)
+				out_irq->specifier[i] =
+						of_read_number(intspec +i, 1);
+			out_irq->size = intsize;
+			out_irq->controller = ipar;
+			of_node_put(old);
+			return 0;
+		}
+
+		/* Now look for an interrupt-map */
+		imap = of_get_property(ipar, "interrupt-map", &imaplen);
+		/* No interrupt map, check for an interrupt parent */
+		if (imap == NULL) {
+			pr_debug(" -> no map, getting parent\n");
+			newpar = of_irq_find_parent(ipar);
+			goto skiplevel;
+		}
+		imaplen /= sizeof(u32);
+
+		/* Look for a mask */
+		imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+		/* If we were passed no "reg" property and we attempt to parse
+		 * an interrupt-map, then #address-cells must be 0.
+		 * Fail if it's not.
+		 */
+		if (addr == NULL && addrsize != 0) {
+			pr_debug(" -> no reg passed in when needed !\n");
+			goto fail;
+		}
+
+		/* Parse interrupt-map */
+		match = 0;
+		while (imaplen > (addrsize + intsize + 1) && !match) {
+			/* Compare specifiers */
+			match = 1;
+			for (i = 0; i < addrsize && match; ++i) {
+				u32 mask = imask ? imask[i] : 0xffffffffu;
+				match = ((addr[i] ^ imap[i]) & mask) == 0;
+			}
+			for (; i < (addrsize + intsize) && match; ++i) {
+				u32 mask = imask ? imask[i] : 0xffffffffu;
+				match =
+				   ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+			}
+			imap += addrsize + intsize;
+			imaplen -= addrsize + intsize;
+
+			pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+			/* Get the interrupt parent */
+			if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+				newpar = of_node_get(of_irq_dflt_pic);
+			else
+				newpar = of_find_node_by_phandle(be32_to_cpup(imap));
+			imap++;
+			--imaplen;
+
+			/* Check if not found */
+			if (newpar == NULL) {
+				pr_debug(" -> imap parent not found !\n");
+				goto fail;
+			}
+
+			/* Get #interrupt-cells and #address-cells of new
+			 * parent
+			 */
+			tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+			if (tmp == NULL) {
+				pr_debug(" -> parent lacks #interrupt-cells!\n");
+				goto fail;
+			}
+			newintsize = be32_to_cpu(*tmp);
+			tmp = of_get_property(newpar, "#address-cells", NULL);
+			newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
+
+			pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+			    newintsize, newaddrsize);
+
+			/* Check for malformed properties */
+			if (imaplen < (newaddrsize + newintsize))
+				goto fail;
+
+			imap += newaddrsize + newintsize;
+			imaplen -= newaddrsize + newintsize;
+
+			pr_debug(" -> imaplen=%d\n", imaplen);
+		}
+		if (!match)
+			goto fail;
+
+		of_node_put(old);
+		old = of_node_get(newpar);
+		addrsize = newaddrsize;
+		intsize = newintsize;
+		intspec = imap - intsize;
+		addr = intspec - addrsize;
+
+	skiplevel:
+		/* Iterate again with new parent */
+		pr_debug(" -> new parent: %s\n", newpar ? newpar->full_name : "<>");
+		of_node_put(ipar);
+		ipar = newpar;
+		newpar = NULL;
+	}
+ fail:
+	of_node_put(ipar);
+	of_node_put(old);
+	of_node_put(newpar);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device: the device whose interrupt is to be resolved
+ * @index: index of the interrupt to resolve
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ */
+int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq)
+{
+	struct device_node *p;
+	const __be32 *intspec, *tmp, *addr;
+	u32 intsize, intlen;
+	int res = -EINVAL;
+
+	pr_debug("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
+
+	/* OldWorld mac stuff is "special", handle out of line */
+	if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC)
+		return of_irq_map_oldworld(device, index, out_irq);
+
+	/* Get the interrupts property */
+	intspec = of_get_property(device, "interrupts", &intlen);
+	if (intspec == NULL)
+		return -EINVAL;
+	intlen /= sizeof(*intspec);
+
+	pr_debug(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
+
+	/* Get the reg property (if any) */
+	addr = of_get_property(device, "reg", NULL);
+
+	/* Look for the interrupt parent. */
+	p = of_irq_find_parent(device);
+	if (p == NULL)
+		return -EINVAL;
+
+	/* Get size of interrupt specifier */
+	tmp = of_get_property(p, "#interrupt-cells", NULL);
+	if (tmp == NULL)
+		goto out;
+	intsize = be32_to_cpu(*tmp);
+
+	pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
+
+	/* Check index */
+	if ((index + 1) * intsize > intlen)
+		goto out;
+
+	/* Get new specifier and map it */
+	res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+			     addr, out_irq);
+ out:
+	of_node_put(p);
+	return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * of_irq_to_resource - Decode a node's IRQ and return it as a resource
+ * @dev: pointer to device tree node
+ * @index: zero-based index of the irq
+ * @r: pointer to resource structure to return result into.
+ */
+int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
+{
+	int irq = irq_of_parse_and_map(dev, index);
+
+	/* Only dereference the resource if both the
+	 * resource and the irq are valid. */
+	if (r && irq != NO_IRQ) {
+		r->start = r->end = irq;
+		r->flags = IORESOURCE_IRQ;
+		r->name = dev->full_name;
+	}
+
+	return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index ab6522c8e4f..0a694debd22 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -14,57 +14,65 @@
 #include <linux/i2c.h>
 #include <linux/of.h>
 #include <linux/of_i2c.h>
+#include <linux/of_irq.h>
 #include <linux/module.h>
 
-void of_register_i2c_devices(struct i2c_adapter *adap,
-			     struct device_node *adap_node)
+void of_i2c_register_devices(struct i2c_adapter *adap)
 {
 	void *result;
 	struct device_node *node;
 
-	for_each_child_of_node(adap_node, node) {
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	for_each_child_of_node(adap->dev.of_node, node) {
 		struct i2c_board_info info = {};
 		struct dev_archdata dev_ad = {};
 		const __be32 *addr;
 		int len;
 
-		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0)
+		dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+			dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+				node->full_name);
 			continue;
+		}
 
 		addr = of_get_property(node, "reg", &len);
-		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
-			printk(KERN_ERR
-			       "of-i2c: invalid i2c device entry\n");
+		if (!addr || (len < sizeof(int))) {
+			dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+				node->full_name);
 			continue;
 		}
 
-		info.irq = irq_of_parse_and_map(node, 0);
-
 		info.addr = be32_to_cpup(addr);
+		if (info.addr > (1 << 10) - 1) {
+			dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+				info.addr, node->full_name);
+			continue;
+		}
 
-		info.of_node = node;
+		info.irq = irq_of_parse_and_map(node, 0);
+		info.of_node = of_node_get(node);
 		info.archdata = &dev_ad;
 
 		request_module("%s", info.type);
 
 		result = i2c_new_device(adap, &info);
 		if (result == NULL) {
-			printk(KERN_ERR
-			       "of-i2c: Failed to load driver for %s\n",
-			       info.type);
+			dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+			        node->full_name);
+			of_node_put(node);
 			irq_dispose_mapping(info.irq);
 			continue;
 		}
-
-		/*
-		 * Get the node to not lose the dev_archdata->of_node.
-		 * Currently there is no way to put it back, as well as no
-		 * of_unregister_i2c_devices() call.
-		 */
-		of_node_get(node);
 	}
 }
-EXPORT_SYMBOL(of_register_i2c_devices);
+EXPORT_SYMBOL(of_i2c_register_devices);
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 42a6715f8e8..1fce00eb421 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -15,6 +15,7 @@
 #include <linux/err.h>
 #include <linux/phy.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/of_mdio.h>
 #include <linux/module.h>
 
diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c
index 5fed7e3c7da..1dbce58a58b 100644
--- a/drivers/of/of_spi.c
+++ b/drivers/of/of_spi.c
@@ -9,17 +9,17 @@
 #include <linux/of.h>
 #include <linux/device.h>
 #include <linux/spi/spi.h>
+#include <linux/of_irq.h>
 #include <linux/of_spi.h>
 
 /**
  * of_register_spi_devices - Register child devices onto the SPI bus
  * @master:	Pointer to spi_master device
- * @np:		parent node of SPI device nodes
  *
- * Registers an spi_device for each child node of 'np' which has a 'reg'
+ * Registers an spi_device for each child node of master node which has a 'reg'
  * property.
  */
-void of_register_spi_devices(struct spi_master *master, struct device_node *np)
+void of_register_spi_devices(struct spi_master *master)
 {
 	struct spi_device *spi;
 	struct device_node *nc;
@@ -27,7 +27,10 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np)
 	int rc;
 	int len;
 
-	for_each_child_of_node(np, nc) {
+	if (!master->dev.of_node)
+		return;
+
+	for_each_child_of_node(master->dev.of_node, nc) {
 		/* Alloc an spi_device */
 		spi = spi_alloc_device(master);
 		if (!spi) {
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 7dacc1ebe91..bb72223c22a 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -14,8 +14,105 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/**
+ * of_find_device_by_node - Find the platform_device associated with a node
+ * @np: Pointer to device tree node
+ *
+ * Returns platform_device pointer, or NULL if not found
+ */
+struct platform_device *of_find_device_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&platform_bus_type, NULL, np, of_dev_node_match);
+	return dev ? to_platform_device(dev) : NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+static int platform_driver_probe_shim(struct platform_device *pdev)
+{
+	struct platform_driver *pdrv;
+	struct of_platform_driver *ofpdrv;
+	const struct of_device_id *match;
+
+	pdrv = container_of(pdev->dev.driver, struct platform_driver, driver);
+	ofpdrv = container_of(pdrv, struct of_platform_driver, platform_driver);
+
+	/* There is an unlikely chance that an of_platform driver might match
+	 * on a non-OF platform device.  If so, then of_match_device() will
+	 * come up empty.  Return -EINVAL in this case so other drivers get
+	 * the chance to bind. */
+	match = of_match_device(pdev->dev.driver->of_match_table, &pdev->dev);
+	return match ? ofpdrv->probe(pdev, match) : -EINVAL;
+}
+
+static void platform_driver_shutdown_shim(struct platform_device *pdev)
+{
+	struct platform_driver *pdrv;
+	struct of_platform_driver *ofpdrv;
+
+	pdrv = container_of(pdev->dev.driver, struct platform_driver, driver);
+	ofpdrv = container_of(pdrv, struct of_platform_driver, platform_driver);
+	ofpdrv->shutdown(pdev);
+}
+
+/**
+ * of_register_platform_driver
+ */
+int of_register_platform_driver(struct of_platform_driver *drv)
+{
+	char *of_name;
+
+	/* setup of_platform_driver to platform_driver adaptors */
+	drv->platform_driver.driver = drv->driver;
+
+	/* Prefix the driver name with 'of:' to avoid namespace collisions
+	 * and bogus matches.  There are some drivers in the tree that
+	 * register both an of_platform_driver and a platform_driver with
+	 * the same name.  This is a temporary measure until they are all
+	 * cleaned up --gcl July 29, 2010 */
+	of_name = kmalloc(strlen(drv->driver.name) + 5, GFP_KERNEL);
+	if (!of_name)
+		return -ENOMEM;
+	sprintf(of_name, "of:%s", drv->driver.name);
+	drv->platform_driver.driver.name = of_name;
+
+	if (drv->probe)
+		drv->platform_driver.probe = platform_driver_probe_shim;
+	drv->platform_driver.remove = drv->remove;
+	if (drv->shutdown)
+		drv->platform_driver.shutdown = platform_driver_shutdown_shim;
+	drv->platform_driver.suspend = drv->suspend;
+	drv->platform_driver.resume = drv->resume;
+
+	return platform_driver_register(&drv->platform_driver);
+}
+EXPORT_SYMBOL(of_register_platform_driver);
+
+void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+	platform_driver_unregister(&drv->platform_driver);
+	kfree(drv->platform_driver.driver.name);
+	drv->platform_driver.driver.name = NULL;
+}
+EXPORT_SYMBOL(of_unregister_platform_driver);
+
+#if defined(CONFIG_PPC_DCR)
+#include <asm/dcr.h>
+#endif
 
 extern struct device_attribute of_platform_device_attrs[];
 
@@ -33,11 +130,11 @@ static int of_platform_device_probe(struct device *dev)
 {
 	int error = -ENODEV;
 	struct of_platform_driver *drv;
-	struct of_device *of_dev;
+	struct platform_device *of_dev;
 	const struct of_device_id *match;
 
 	drv = to_of_platform_driver(dev->driver);
-	of_dev = to_of_device(dev);
+	of_dev = to_platform_device(dev);
 
 	if (!drv->probe)
 		return error;
@@ -55,7 +152,7 @@ static int of_platform_device_probe(struct device *dev)
 
 static int of_platform_device_remove(struct device *dev)
 {
-	struct of_device *of_dev = to_of_device(dev);
+	struct platform_device *of_dev = to_platform_device(dev);
 	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
 
 	if (dev->driver && drv->remove)
@@ -65,7 +162,7 @@ static int of_platform_device_remove(struct device *dev)
 
 static void of_platform_device_shutdown(struct device *dev)
 {
-	struct of_device *of_dev = to_of_device(dev);
+	struct platform_device *of_dev = to_platform_device(dev);
 	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
 
 	if (dev->driver && drv->shutdown)
@@ -76,7 +173,7 @@ static void of_platform_device_shutdown(struct device *dev)
 
 static int of_platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 {
-	struct of_device *of_dev = to_of_device(dev);
+	struct platform_device *of_dev = to_platform_device(dev);
 	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
 	int ret = 0;
 
@@ -87,7 +184,7 @@ static int of_platform_legacy_suspend(struct device *dev, pm_message_t mesg)
 
 static int of_platform_legacy_resume(struct device *dev)
 {
-	struct of_device *of_dev = to_of_device(dev);
+	struct platform_device *of_dev = to_platform_device(dev);
 	struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
 	int ret = 0;
 
@@ -384,15 +481,286 @@ int of_bus_type_init(struct bus_type *bus, const char *name)
 
 int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
 {
-	drv->driver.bus = bus;
+	/*
+	 * Temporary: of_platform_bus used to be distinct from the platform
+	 * bus.  It isn't anymore, and so drivers on the platform bus need
+	 * to be registered in a special way.
+	 *
+	 * After all of_platform_bus_type drivers are converted to
+	 * platform_drivers, this exception can be removed.
+	 */
+	if (bus == &platform_bus_type)
+		return of_register_platform_driver(drv);
 
 	/* register with core */
+	drv->driver.bus = bus;
 	return driver_register(&drv->driver);
 }
 EXPORT_SYMBOL(of_register_driver);
 
 void of_unregister_driver(struct of_platform_driver *drv)
 {
-	driver_unregister(&drv->driver);
+	if (drv->driver.bus == &platform_bus_type)
+		of_unregister_platform_driver(drv);
+	else
+		driver_unregister(&drv->driver);
 }
 EXPORT_SYMBOL(of_unregister_driver);
+
+#if !defined(CONFIG_SPARC)
+/*
+ * The following routines scan a subtree and registers a device for
+ * each applicable node.
+ *
+ * Note: sparc doesn't use these routines because it has a different
+ * mechanism for creating devices from device tree nodes.
+ */
+
+/**
+ * of_device_make_bus_id - Use the device node data to assign a unique name
+ * @dev: pointer to device structure that is linked to a device tree node
+ *
+ * This routine will first try using either the dcr-reg or the reg property
+ * value to derive a unique name.  As a last resort it will use the node
+ * name followed by a unique number.
+ */
+void of_device_make_bus_id(struct device *dev)
+{
+	static atomic_t bus_no_reg_magic;
+	struct device_node *node = dev->of_node;
+	const u32 *reg;
+	u64 addr;
+	int magic;
+
+#ifdef CONFIG_PPC_DCR
+	/*
+	 * If it's a DCR based device, use 'd' for native DCRs
+	 * and 'D' for MMIO DCRs.
+	 */
+	reg = of_get_property(node, "dcr-reg", NULL);
+	if (reg) {
+#ifdef CONFIG_PPC_DCR_NATIVE
+		dev_set_name(dev, "d%x.%s", *reg, node->name);
+#else /* CONFIG_PPC_DCR_NATIVE */
+		u64 addr = of_translate_dcr_address(node, *reg, NULL);
+		if (addr != OF_BAD_ADDR) {
+			dev_set_name(dev, "D%llx.%s",
+				     (unsigned long long)addr, node->name);
+			return;
+		}
+#endif /* !CONFIG_PPC_DCR_NATIVE */
+	}
+#endif /* CONFIG_PPC_DCR */
+
+	/*
+	 * For MMIO, get the physical address
+	 */
+	reg = of_get_property(node, "reg", NULL);
+	if (reg) {
+		addr = of_translate_address(node, reg);
+		if (addr != OF_BAD_ADDR) {
+			dev_set_name(dev, "%llx.%s",
+				     (unsigned long long)addr, node->name);
+			return;
+		}
+	}
+
+	/*
+	 * No BusID, use the node name and add a globally incremented
+	 * counter (and pray...)
+	 */
+	magic = atomic_add_return(1, &bus_no_reg_magic);
+	dev_set_name(dev, "%s.%d", node->name, magic - 1);
+}
+
+/**
+ * of_device_alloc - Allocate and initialize an of_device
+ * @np: device node to assign to device
+ * @bus_id: Name to assign to the device.  May be null to use default name.
+ * @parent: Parent device.
+ */
+struct platform_device *of_device_alloc(struct device_node *np,
+				  const char *bus_id,
+				  struct device *parent)
+{
+	struct platform_device *dev;
+	int rc, i, num_reg = 0, num_irq = 0;
+	struct resource *res, temp_res;
+
+	/* First count how many resources are needed */
+	while (of_address_to_resource(np, num_reg, &temp_res) == 0)
+		num_reg++;
+	while (of_irq_to_resource(np, num_irq, &temp_res) != NO_IRQ)
+		num_irq++;
+
+	/* Allocate memory for both the struct device and the resource table */
+	dev = kzalloc(sizeof(*dev) + (sizeof(*res) * (num_reg + num_irq)),
+		      GFP_KERNEL);
+	if (!dev)
+		return NULL;
+	res = (struct resource *) &dev[1];
+
+	/* Populate the resource table */
+	if (num_irq || num_reg) {
+		dev->num_resources = num_reg + num_irq;
+		dev->resource = res;
+		for (i = 0; i < num_reg; i++, res++) {
+			rc = of_address_to_resource(np, i, res);
+			WARN_ON(rc);
+		}
+		for (i = 0; i < num_irq; i++, res++) {
+			rc = of_irq_to_resource(np, i, res);
+			WARN_ON(rc == NO_IRQ);
+		}
+	}
+
+	dev->dev.of_node = of_node_get(np);
+#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE)
+	dev->dev.dma_mask = &dev->archdata.dma_mask;
+#endif
+	dev->dev.parent = parent;
+	dev->dev.release = of_release_dev;
+
+	if (bus_id)
+		dev_set_name(&dev->dev, "%s", bus_id);
+	else
+		of_device_make_bus_id(&dev->dev);
+
+	return dev;
+}
+EXPORT_SYMBOL(of_device_alloc);
+
+/**
+ * of_platform_device_create - Alloc, initialize and register an of_device
+ * @np: pointer to node to create device for
+ * @bus_id: name to assign device
+ * @parent: Linux device model parent device.
+ */
+struct platform_device *of_platform_device_create(struct device_node *np,
+					    const char *bus_id,
+					    struct device *parent)
+{
+	struct platform_device *dev;
+
+	dev = of_device_alloc(np, bus_id, parent);
+	if (!dev)
+		return NULL;
+
+#if defined(CONFIG_PPC) || defined(CONFIG_MICROBLAZE)
+	dev->archdata.dma_mask = 0xffffffffUL;
+#endif
+	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	dev->dev.bus = &platform_bus_type;
+
+	/* We do not fill the DMA ops for platform devices by default.
+	 * This is currently the responsibility of the platform code
+	 * to do such, possibly using a device notifier
+	 */
+
+	if (of_device_register(dev) != 0) {
+		of_device_free(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+EXPORT_SYMBOL(of_platform_device_create);
+
+/**
+ * of_platform_bus_create - Create an OF device for a bus node and all its
+ * children. Optionally recursively instantiate matching busses.
+ * @bus: device node of the bus to instantiate
+ * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
+ * disallow recursive creation of child busses
+ */
+static int of_platform_bus_create(const struct device_node *bus,
+				  const struct of_device_id *matches,
+				  struct device *parent)
+{
+	struct device_node *child;
+	struct platform_device *dev;
+	int rc = 0;
+
+	for_each_child_of_node(bus, child) {
+		pr_debug("   create child: %s\n", child->full_name);
+		dev = of_platform_device_create(child, NULL, parent);
+		if (dev == NULL)
+			rc = -ENOMEM;
+		else if (!of_match_node(matches, child))
+			continue;
+		if (rc == 0) {
+			pr_debug("   and sub busses\n");
+			rc = of_platform_bus_create(child, matches, &dev->dev);
+		}
+		if (rc) {
+			of_node_put(child);
+			break;
+		}
+	}
+	return rc;
+}
+
+/**
+ * of_platform_bus_probe - Probe the device-tree for platform busses
+ * @root: parent of the first level to probe or NULL for the root of the tree
+ * @matches: match table, NULL to use the default
+ * @parent: parent to hook devices from, NULL for toplevel
+ *
+ * Note that children of the provided root are not instantiated as devices
+ * unless the specified root itself matches the bus list and is not NULL.
+ */
+int of_platform_bus_probe(struct device_node *root,
+			  const struct of_device_id *matches,
+			  struct device *parent)
+{
+	struct device_node *child;
+	struct platform_device *dev;
+	int rc = 0;
+
+	if (WARN_ON(!matches || matches == OF_NO_DEEP_PROBE))
+		return -EINVAL;
+	if (root == NULL)
+		root = of_find_node_by_path("/");
+	else
+		of_node_get(root);
+	if (root == NULL)
+		return -EINVAL;
+
+	pr_debug("of_platform_bus_probe()\n");
+	pr_debug(" starting at: %s\n", root->full_name);
+
+	/* Do a self check of bus type, if there's a match, create
+	 * children
+	 */
+	if (of_match_node(matches, root)) {
+		pr_debug(" root match, create all sub devices\n");
+		dev = of_platform_device_create(root, NULL, parent);
+		if (dev == NULL) {
+			rc = -ENOMEM;
+			goto bail;
+		}
+		pr_debug(" create all sub busses\n");
+		rc = of_platform_bus_create(root, matches, &dev->dev);
+		goto bail;
+	}
+	for_each_child_of_node(root, child) {
+		if (!of_match_node(matches, child))
+			continue;
+
+		pr_debug("  match: %s\n", child->full_name);
+		dev = of_platform_device_create(child, NULL, parent);
+		if (dev == NULL)
+			rc = -ENOMEM;
+		else
+			rc = of_platform_bus_create(child, matches, &dev->dev);
+		if (rc) {
+			of_node_put(child);
+			break;
+		}
+	}
+ bail:
+	of_node_put(root);
+	return rc;
+}
+EXPORT_SYMBOL(of_platform_bus_probe);
+#endif /* !CONFIG_SPARC */
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index 5df60a6b677..dd87e86048b 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -135,7 +135,7 @@ static int event_buffer_open(struct inode *inode, struct file *file)
 	 * echo 1 >/dev/oprofile/enable
 	 */
 
-	return 0;
+	return nonseekable_open(inode, file);
 
 fail:
 	dcookie_unregister(file->private_data);
@@ -205,4 +205,5 @@ const struct file_operations event_buffer_fops = {
 	.open		= event_buffer_open,
 	.release	= event_buffer_release,
 	.read		= event_buffer_read,
+	.llseek		= no_llseek,
 };
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index fd8cfe95f0a..23e50f4a27c 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -48,7 +48,6 @@
 #include <linux/parport.h>
 #include <linux/parport_pc.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -102,8 +101,8 @@ static int parport_probe(struct pcmcia_device *link)
     link->priv = info;
     info->p_dev = link;
 
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-    link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+    link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -144,16 +143,16 @@ static int parport_config_check(struct pcmcia_device *p_dev,
 {
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
 		if (epp_mode)
 			p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin == 2) {
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 		return 0;
 	}
@@ -178,12 +177,14 @@ static int parport_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
+    p = parport_pc_probe_port(link->resource[0]->start,
+			      link->resource[1]->start,
 			      link->irq, PARPORT_DMA_NONE,
 			      &link->dev, IRQF_SHARED);
     if (p == NULL) {
 	printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at "
-	       "0x%3x, irq %u failed\n", link->io.BasePort1,
+	       "0x%3x, irq %u failed\n",
+	       (unsigned int) link->resource[0]->start,
 	       link->irq);
 	goto failed;
     }
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 9a5b4b89416..210a6441a06 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -295,7 +295,7 @@ static int __devinit bpp_probe(struct of_device *op, const struct of_device_id *
 	void __iomem *base;
 	struct parport *p;
 
-	irq = op->irqs[0];
+	irq = op->archdata.irqs[0];
 	base = of_ioremap(&op->resource[0], 0,
 			  resource_size(&op->resource[0]),
 			  "sunbpp");
@@ -393,12 +393,12 @@ static struct of_platform_driver bpp_sbus_driver = {
 
 static int __init parport_sunbpp_init(void)
 {
-	return of_register_driver(&bpp_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&bpp_sbus_driver);
 }
 
 static void __exit parport_sunbpp_exit(void)
 {
-	of_unregister_driver(&bpp_sbus_driver);
+	of_unregister_platform_driver(&bpp_sbus_driver);
 }
 
 MODULE_AUTHOR("Derrick J Brashear");
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 0b51857fbaf..dc1aa092286 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -55,6 +55,9 @@ obj-$(CONFIG_MICROBLAZE) += setup-bus.o
 #
 obj-$(CONFIG_ACPI)    += pci-acpi.o
 
+# SMBIOS provided firmware instance and labels
+obj-$(CONFIG_DMI)    += pci-label.o
+
 # Cardbus & CompactPCI use setup-bus
 obj-$(CONFIG_HOTPLUG) += setup-bus.o
 
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 628ea20a884..7f0af0e9b82 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -56,7 +56,7 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	int i;
 
 	for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
-		bus->resource[i] = 0;
+		bus->resource[i] = NULL;
 
 	list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) {
 		list_del(&bus_res->list);
@@ -240,6 +240,8 @@ void pci_enable_bridges(struct pci_bus *bus)
 		if (dev->subordinate) {
 			if (!pci_is_enabled(dev)) {
 				retval = pci_enable_device(dev);
+				if (retval)
+					dev_err(&dev->dev, "Error enabling bridge (%d), continuing\n", retval);
 				pci_set_master(dev);
 			}
 			pci_enable_bridges(dev->subordinate);
diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c
index 5317e4d7d96..17d10e2e8fb 100644
--- a/drivers/pci/hotplug/fakephp.c
+++ b/drivers/pci/hotplug/fakephp.c
@@ -135,7 +135,7 @@ static int __init init_legacy(void)
 	struct pci_dev *pdev = NULL;
 
 	/* Add existing devices */
-	while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)))
+	for_each_pci_dev(pdev)
 		legacy_add_slot(pdev);
 
 	/* Be alerted of any new ones */
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index 2fce726758d..a4031dfe938 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -137,7 +137,7 @@ int pciehp_unconfigure_device(struct slot *p_slot)
 					 "Cannot remove display device %s\n",
 					 pci_name(temp));
 				pci_dev_put(temp);
-				rc = EINVAL;
+				rc = -EINVAL;
 				break;
 			}
 		}
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
index 5f5e8d2e355..d3985e7deab 100644
--- a/drivers/pci/hotplug/shpchp_hpc.c
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -113,7 +113,7 @@
 #define CON_PFAULT_INTR_MASK	(1 << 28)
 #define MRL_CHANGE_SERR_MASK	(1 << 29)
 #define CON_PFAULT_SERR_MASK	(1 << 30)
-#define SLOT_REG_RSVDZ_MASK	(1 << 15) | (7 << 21)
+#define SLOT_REG_RSVDZ_MASK	((1 << 15) | (7 << 21))
 
 /*
  * SHPC Command Code definitnions
diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c
index 8c3d3219f22..a2ccfcd3c29 100644
--- a/drivers/pci/hotplug/shpchp_pci.c
+++ b/drivers/pci/hotplug/shpchp_pci.c
@@ -60,12 +60,6 @@ int __ref shpchp_configure_device(struct slot *p_slot)
 		dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
 		if (!dev)
 			continue;
-		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			ctrl_err(ctrl, "Cannot hot-add display device %s\n",
-				 pci_name(dev));
-			pci_dev_put(dev);
-			continue;
-		}
 		if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 				(dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 			/* Find an unused bus number for the new bridge */
@@ -114,17 +108,11 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
 		 __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
 
-	for (j=0; j<8 ; j++) {
-		struct pci_dev* temp = pci_get_slot(parent,
+	for (j = 0; j < 8 ; j++) {
+		struct pci_dev *temp = pci_get_slot(parent,
 				(p_slot->device << 3) | j);
 		if (!temp)
 			continue;
-		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
-			ctrl_err(ctrl, "Cannot remove display device %s\n",
-				 pci_name(temp));
-			pci_dev_put(temp);
-			continue;
-		}
 		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 			if (bctl & PCI_BRIDGE_CTL_VGA) {
@@ -132,7 +120,8 @@ int shpchp_unconfigure_device(struct slot *p_slot)
 					 "Cannot remove display device %s\n",
 					 pci_name(temp));
 				pci_dev_put(temp);
-				continue;
+				rc = -EINVAL;
+				break;
 			}
 		}
 		pci_remove_bus_device(temp);
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index c9171be7456..b0de5794718 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3030,6 +3030,34 @@ static void __init iommu_exit_mempool(void)
 
 }
 
+static void quirk_ioat_snb_local_iommu(struct pci_dev *pdev)
+{
+	struct dmar_drhd_unit *drhd;
+	u32 vtbar;
+	int rc;
+
+	/* We know that this device on this chipset has its own IOMMU.
+	 * If we find it under a different IOMMU, then the BIOS is lying
+	 * to us. Hope that the IOMMU for this device is actually
+	 * disabled, and it needs no translation...
+	 */
+	rc = pci_bus_read_config_dword(pdev->bus, PCI_DEVFN(0, 0), 0xb0, &vtbar);
+	if (rc) {
+		/* "can't" happen */
+		dev_info(&pdev->dev, "failed to run vt-d quirk\n");
+		return;
+	}
+	vtbar &= 0xffff0000;
+
+	/* we know that the this iommu should be at offset 0xa000 from vtbar */
+	drhd = dmar_find_matched_drhd_unit(pdev);
+	if (WARN_TAINT_ONCE(!drhd || drhd->reg_base_addr - vtbar != 0xa000,
+			    TAINT_FIRMWARE_WORKAROUND,
+			    "BIOS assigned incorrect VT-d unit for Intel(R) QuickData Technology device\n"))
+		pdev->dev.archdata.iommu = DUMMY_DEVICE_DOMAIN_INFO;
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB, quirk_ioat_snb_local_iommu);
+
 static void __init init_no_remapping_devices(void)
 {
 	struct dmar_drhd_unit *drhd;
@@ -3698,6 +3726,8 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain,
 
 	if (cap == IOMMU_CAP_CACHE_COHERENCY)
 		return dmar_domain->iommu_snooping;
+	if (cap == IOMMU_CAP_INTR_REMAP)
+		return intr_remapping_enabled;
 
 	return 0;
 }
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index 1315ac688aa..1694a0e2845 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -311,8 +311,8 @@ int modify_irte(int irq, struct irte *irte_modified)
 	index = irq_iommu->irte_index + irq_iommu->sub_handle;
 	irte = &iommu->ir_table->base[index];
 
-	set_64bit((unsigned long *)&irte->low, irte_modified->low);
-	set_64bit((unsigned long *)&irte->high, irte_modified->high);
+	set_64bit(&irte->low, irte_modified->low);
+	set_64bit(&irte->high, irte_modified->high);
 	__iommu_flush_cache(iommu, irte, sizeof(*irte));
 
 	rc = qi_flush_iec(iommu, index, 0);
@@ -393,8 +393,8 @@ static int clear_entries(struct irq_2_iommu *irq_iommu)
 	end = start + (1 << irq_iommu->irte_mask);
 
 	for (entry = start; entry < end; entry++) {
-		set_64bit((unsigned long *)&entry->low, 0);
-		set_64bit((unsigned long *)&entry->high, 0);
+		set_64bit(&entry->low, 0);
+		set_64bit(&entry->high, 0);
 	}
 
 	return qi_flush_iec(iommu, index, irq_iommu->irte_mask);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 77b68eaf021..69b7be33b3a 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -196,6 +196,9 @@ void unmask_msi_irq(unsigned int irq)
 void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 {
 	struct msi_desc *entry = get_irq_desc_msi(desc);
+
+	BUG_ON(entry->dev->current_state != PCI_D0);
+
 	if (entry->msi_attrib.is_msix) {
 		void __iomem *base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
@@ -229,10 +232,32 @@ void read_msi_msg(unsigned int irq, struct msi_msg *msg)
 	read_msi_msg_desc(desc, msg);
 }
 
+void get_cached_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
+{
+	struct msi_desc *entry = get_irq_desc_msi(desc);
+
+	/* Assert that the cache is valid, assuming that
+	 * valid messages are not all-zeroes. */
+	BUG_ON(!(entry->msg.address_hi | entry->msg.address_lo |
+		 entry->msg.data));
+
+	*msg = entry->msg;
+}
+
+void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	get_cached_msi_msg_desc(desc, msg);
+}
+
 void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg)
 {
 	struct msi_desc *entry = get_irq_desc_msi(desc);
-	if (entry->msi_attrib.is_msix) {
+
+	if (entry->dev->current_state != PCI_D0) {
+		/* Don't touch the hardware now */
+	} else if (entry->msi_attrib.is_msix) {
 		void __iomem *base;
 		base = entry->mask_base +
 			entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
@@ -435,7 +460,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 static void __iomem *msix_map_region(struct pci_dev *dev, unsigned pos,
 							unsigned nr_entries)
 {
-	unsigned long phys_addr;
+	resource_size_t phys_addr;
 	u32 table_offset;
 	u8 bir;
 
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 1ab98bbe58d..24e19c594e5 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -296,14 +296,12 @@ static int acpi_dev_run_wake(struct device *phys_dev, bool enable)
 		if (!dev->wakeup.run_wake_count++) {
 			acpi_enable_wakeup_device_power(dev, ACPI_STATE_S0);
 			acpi_enable_gpe(dev->wakeup.gpe_device,
-					dev->wakeup.gpe_number,
-					ACPI_GPE_TYPE_RUNTIME);
+					dev->wakeup.gpe_number);
 		}
 	} else if (dev->wakeup.run_wake_count > 0) {
 		if (!--dev->wakeup.run_wake_count) {
 			acpi_disable_gpe(dev->wakeup.gpe_device,
-					 dev->wakeup.gpe_number,
-					 ACPI_GPE_TYPE_RUNTIME);
+					 dev->wakeup.gpe_number);
 			acpi_disable_wakeup_device_power(dev);
 		}
 	} else {
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index f9a0aec3abc..8a6f797de8e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -289,8 +289,26 @@ struct drv_dev_and_id {
 static long local_pci_probe(void *_ddi)
 {
 	struct drv_dev_and_id *ddi = _ddi;
-
-	return ddi->drv->probe(ddi->dev, ddi->id);
+	struct device *dev = &ddi->dev->dev;
+	int rc;
+
+	/* Unbound PCI devices are always set to disabled and suspended.
+	 * During probe, the device is set to enabled and active and the
+	 * usage count is incremented.  If the driver supports runtime PM,
+	 * it should call pm_runtime_put_noidle() in its probe routine and
+	 * pm_runtime_get_noresume() in its remove routine.
+	 */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	rc = ddi->drv->probe(ddi->dev, ddi->id);
+	if (rc) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_suspended(dev);
+		pm_runtime_put_noidle(dev);
+	}
+	return rc;
 }
 
 static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
@@ -369,11 +387,19 @@ static int pci_device_remove(struct device * dev)
 	struct pci_driver * drv = pci_dev->driver;
 
 	if (drv) {
-		if (drv->remove)
+		if (drv->remove) {
+			pm_runtime_get_sync(dev);
 			drv->remove(pci_dev);
+			pm_runtime_put_noidle(dev);
+		}
 		pci_dev->driver = NULL;
 	}
 
+	/* Undo the runtime PM settings in local_pci_probe() */
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+
 	/*
 	 * If the device is still on, set the power state as "unknown",
 	 * since it might change by the next time we load the driver.
diff --git a/drivers/pci/pci-label.c b/drivers/pci/pci-label.c
new file mode 100644
index 00000000000..90c0a729cd3
--- /dev/null
+++ b/drivers/pci/pci-label.c
@@ -0,0 +1,143 @@
+/*
+ * Purpose: Export the firmware instance and label associated with
+ * a pci device to sysfs
+ * Copyright (C) 2010 Dell Inc.
+ * by Narendra K <Narendra_K@dell.com>,
+ * Jordan Hargrave <Jordan_Hargrave@dell.com>
+ *
+ * SMBIOS defines type 41 for onboard pci devices. This code retrieves
+ * the instance number and string from the type 41 record and exports
+ * it to sysfs.
+ *
+ * Please see http://linux.dell.com/wiki/index.php/Oss/libnetdevname for more
+ * information.
+ */
+
+#include <linux/dmi.h>
+#include <linux/sysfs.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include "pci.h"
+
+enum smbios_attr_enum {
+	SMBIOS_ATTR_NONE = 0,
+	SMBIOS_ATTR_LABEL_SHOW,
+	SMBIOS_ATTR_INSTANCE_SHOW,
+};
+
+static mode_t
+find_smbios_instance_string(struct pci_dev *pdev, char *buf,
+			    enum smbios_attr_enum attribute)
+{
+	const struct dmi_device *dmi;
+	struct dmi_dev_onboard *donboard;
+	int bus;
+	int devfn;
+
+	bus = pdev->bus->number;
+	devfn = pdev->devfn;
+
+	dmi = NULL;
+	while ((dmi = dmi_find_device(DMI_DEV_TYPE_DEV_ONBOARD,
+				      NULL, dmi)) != NULL) {
+		donboard = dmi->device_data;
+		if (donboard && donboard->bus == bus &&
+					donboard->devfn == devfn) {
+			if (buf) {
+				if (attribute == SMBIOS_ATTR_INSTANCE_SHOW)
+					return scnprintf(buf, PAGE_SIZE,
+							 "%d\n",
+							 donboard->instance);
+				else if (attribute == SMBIOS_ATTR_LABEL_SHOW)
+					return scnprintf(buf, PAGE_SIZE,
+							 "%s\n",
+							 dmi->name);
+			}
+			return strlen(dmi->name);
+		}
+	}
+	return 0;
+}
+
+static mode_t
+smbios_instance_string_exist(struct kobject *kobj, struct attribute *attr,
+			     int n)
+{
+	struct device *dev;
+	struct pci_dev *pdev;
+
+	dev = container_of(kobj, struct device, kobj);
+	pdev = to_pci_dev(dev);
+
+	return find_smbios_instance_string(pdev, NULL, SMBIOS_ATTR_NONE) ?
+					   S_IRUGO : 0;
+}
+
+static ssize_t
+smbioslabel_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
+	pdev = to_pci_dev(dev);
+
+	return find_smbios_instance_string(pdev, buf,
+					   SMBIOS_ATTR_LABEL_SHOW);
+}
+
+static ssize_t
+smbiosinstance_show(struct device *dev,
+		    struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev;
+	pdev = to_pci_dev(dev);
+
+	return find_smbios_instance_string(pdev, buf,
+					   SMBIOS_ATTR_INSTANCE_SHOW);
+}
+
+static struct device_attribute smbios_attr_label = {
+	.attr = {.name = "label", .mode = 0444},
+	.show = smbioslabel_show,
+};
+
+static struct device_attribute smbios_attr_instance = {
+	.attr = {.name = "index", .mode = 0444},
+	.show = smbiosinstance_show,
+};
+
+static struct attribute *smbios_attributes[] = {
+	&smbios_attr_label.attr,
+	&smbios_attr_instance.attr,
+	NULL,
+};
+
+static struct attribute_group smbios_attr_group = {
+	.attrs = smbios_attributes,
+	.is_visible = smbios_instance_string_exist,
+};
+
+static int
+pci_create_smbiosname_file(struct pci_dev *pdev)
+{
+	if (!sysfs_create_group(&pdev->dev.kobj, &smbios_attr_group))
+		return 0;
+	return -ENODEV;
+}
+
+static void
+pci_remove_smbiosname_file(struct pci_dev *pdev)
+{
+	sysfs_remove_group(&pdev->dev.kobj, &smbios_attr_group);
+}
+
+void pci_create_firmware_label_files(struct pci_dev *pdev)
+{
+	if (!pci_create_smbiosname_file(pdev))
+		;
+}
+
+void pci_remove_firmware_label_files(struct pci_dev *pdev)
+{
+	pci_remove_smbiosname_file(pdev);
+}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index c9957f68ac9..b5a7d9bfcb2 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -734,7 +734,7 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
-	struct resource *res = (struct resource *)attr->private;
+	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	resource_size_t start, end;
 	int i;
@@ -778,6 +778,70 @@ pci_mmap_resource_wc(struct file *filp, struct kobject *kobj,
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
+static ssize_t
+pci_resource_io(struct file *filp, struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t off, size_t count, bool write)
+{
+	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
+						       struct device, kobj));
+	struct resource *res = attr->private;
+	unsigned long port = off;
+	int i;
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		if (res == &pdev->resource[i])
+			break;
+	if (i >= PCI_ROM_RESOURCE)
+		return -ENODEV;
+
+	port += pci_resource_start(pdev, i);
+
+	if (port > pci_resource_end(pdev, i))
+		return 0;
+
+	if (port + count - 1 > pci_resource_end(pdev, i))
+		return -EINVAL;
+
+	switch (count) {
+	case 1:
+		if (write)
+			outb(*(u8 *)buf, port);
+		else
+			*(u8 *)buf = inb(port);
+		return 1;
+	case 2:
+		if (write)
+			outw(*(u16 *)buf, port);
+		else
+			*(u16 *)buf = inw(port);
+		return 2;
+	case 4:
+		if (write)
+			outl(*(u32 *)buf, port);
+		else
+			*(u32 *)buf = inl(port);
+		return 4;
+	}
+	return -EINVAL;
+}
+
+static ssize_t
+pci_read_resource_io(struct file *filp, struct kobject *kobj,
+		     struct bin_attribute *attr, char *buf,
+		     loff_t off, size_t count)
+{
+	return pci_resource_io(filp, kobj, attr, buf, off, count, false);
+}
+
+static ssize_t
+pci_write_resource_io(struct file *filp, struct kobject *kobj,
+		      struct bin_attribute *attr, char *buf,
+		      loff_t off, size_t count)
+{
+	return pci_resource_io(filp, kobj, attr, buf, off, count, true);
+}
+
 /**
  * pci_remove_resource_files - cleanup resource files
  * @pdev: dev to cleanup
@@ -828,6 +892,10 @@ static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
 			sprintf(res_attr_name, "resource%d", num);
 			res_attr->mmap = pci_mmap_resource_uc;
 		}
+		if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+			res_attr->read = pci_read_resource_io;
+			res_attr->write = pci_write_resource_io;
+		}
 		res_attr->attr.name = res_attr_name;
 		res_attr->attr.mode = S_IRUSR | S_IWUSR;
 		res_attr->size = pci_resource_len(pdev, num);
@@ -1097,6 +1165,8 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 	if (retval)
 		goto err_vga_file;
 
+	pci_create_firmware_label_files(pdev);
+
 	return 0;
 
 err_vga_file:
@@ -1164,6 +1234,9 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
 		sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
 		kfree(pdev->rom_attr);
 	}
+
+	pci_remove_firmware_label_files(pdev);
+
 }
 
 static int __init pci_sysfs_init(void)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 130ed1daf0f..7fa3cbd742c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2312,21 +2312,17 @@ void pci_msi_off(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pci_msi_off);
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE
 int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
 {
 	return dma_set_max_seg_size(&dev->dev, size);
 }
 EXPORT_SYMBOL(pci_set_dma_max_seg_size);
-#endif
 
-#ifndef HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY
 int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
 {
 	return dma_set_seg_boundary(&dev->dev, mask);
 }
 EXPORT_SYMBOL(pci_set_dma_seg_boundary);
-#endif
 
 static int pcie_flr(struct pci_dev *dev, int probe)
 {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index c8b7fd056cc..679c39de6a8 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -11,6 +11,15 @@
 extern int pci_uevent(struct device *dev, struct kobj_uevent_env *env);
 extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
 extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
+#ifndef CONFIG_DMI
+static inline void pci_create_firmware_label_files(struct pci_dev *pdev)
+{ return; }
+static inline void pci_remove_firmware_label_files(struct pci_dev *pdev)
+{ return; }
+#else
+extern void pci_create_firmware_label_files(struct pci_dev *pdev);
+extern void pci_remove_firmware_label_files(struct pci_dev *pdev);
+#endif
 extern void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef HAVE_PCI_MMAP
 extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index b8b494b3e0d..dda70981b7a 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -31,14 +31,22 @@ source "drivers/pci/pcie/aer/Kconfig"
 # PCI Express ASPM
 #
 config PCIEASPM
-	bool "PCI Express ASPM support(Experimental)"
-	depends on PCI && EXPERIMENTAL && PCIEPORTBUS
-	default n
+	bool "PCI Express ASPM control" if EMBEDDED
+	depends on PCI && PCIEPORTBUS
+	default y
 	help
-	  This enables PCI Express ASPM (Active State Power Management) and
-	  Clock Power Management. ASPM supports state L0/L0s/L1.
+	  This enables OS control over PCI Express ASPM (Active State
+	  Power Management) and Clock Power Management. ASPM supports
+	  state L0/L0s/L1.
 
-	  When in doubt, say N.
+	  ASPM is initially set up the the firmware. With this option enabled,
+	  Linux can modify this state in order to disable ASPM on known-bad
+	  hardware or configurations and enable it when known-safe.
+
+	  ASPM can be disabled or enabled at runtime via
+	  /sys/module/pcie_aspm/parameters/policy
+
+	  When in doubt, say Y.
 config PCIEASPM_DEBUG
 	bool "Debug PCI Express ASPM"
 	depends on PCIEASPM
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 8af4f619bba..fc0b5a93e1d 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -727,20 +727,21 @@ static void aer_isr_one_error(struct pcie_device *p_device,
 static int get_e_source(struct aer_rpc *rpc, struct aer_err_source *e_src)
 {
 	unsigned long flags;
-	int ret = 0;
 
 	/* Lock access to Root error producer/consumer index */
 	spin_lock_irqsave(&rpc->e_lock, flags);
-	if (rpc->prod_idx != rpc->cons_idx) {
-		*e_src = rpc->e_sources[rpc->cons_idx];
-		rpc->cons_idx++;
-		if (rpc->cons_idx == AER_ERROR_SOURCES_MAX)
-			rpc->cons_idx = 0;
-		ret = 1;
+	if (rpc->prod_idx == rpc->cons_idx) {
+		spin_unlock_irqrestore(&rpc->e_lock, flags);
+		return 0;
 	}
+
+	*e_src = rpc->e_sources[rpc->cons_idx];
+	rpc->cons_idx++;
+	if (rpc->cons_idx == AER_ERROR_SOURCES_MAX)
+		rpc->cons_idx = 0;
 	spin_unlock_irqrestore(&rpc->e_lock, flags);
 
-	return ret;
+	return 1;
 }
 
 /**
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index be53d98fa38..71222814c1e 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -588,11 +588,23 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
 	 * update through pcie_aspm_cap_init().
 	 */
 	pcie_aspm_cap_init(link, blacklist);
-	pcie_config_aspm_path(link);
 
 	/* Setup initial Clock PM state */
 	pcie_clkpm_cap_init(link, blacklist);
-	pcie_set_clkpm(link, policy_to_clkpm_state(link));
+
+	/*
+	 * At this stage drivers haven't had an opportunity to change the
+	 * link policy setting. Enabling ASPM on broken hardware can cripple
+	 * it even before the driver has had a chance to disable ASPM, so
+	 * default to a safe level right now. If we're enabling ASPM beyond
+	 * the BIOS's expectation, we'll do so once pci_enable_device() is
+	 * called.
+	 */
+	if (aspm_policy != POLICY_POWERSAVE) {
+		pcie_config_aspm_path(link);
+		pcie_set_clkpm(link, policy_to_clkpm_state(link));
+	}
+
 unlock:
 	mutex_unlock(&aspm_lock);
 out:
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f4adba2d1dd..12625d90f8b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -163,9 +163,16 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			struct resource *res, unsigned int pos)
 {
 	u32 l, sz, mask;
+	u16 orig_cmd;
 
 	mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
 
+	if (!dev->mmio_always_on) {
+		pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
+		pci_write_config_word(dev, PCI_COMMAND,
+			orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
+	}
+
 	res->name = pci_name(dev);
 
 	pci_read_config_dword(dev, pos, &l);
@@ -173,6 +180,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	pci_read_config_dword(dev, pos, &sz);
 	pci_write_config_dword(dev, pos, l);
 
+	if (!dev->mmio_always_on)
+		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
+
 	/*
 	 * All bits set in sz means the device isn't working properly.
 	 * If the BAR isn't implemented, all bits must be 0.  If it's a
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 449e890267a..01f0306525a 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -431,8 +431,6 @@ int pci_proc_detach_device(struct pci_dev *dev)
 	struct proc_dir_entry *e;
 
 	if ((e = dev->procent)) {
-		if (atomic_read(&e->count) > 1)
-			return -EBUSY;
 		remove_proc_entry(e->name, dev->bus->procdir);
 		dev->procent = NULL;
 	}
@@ -485,9 +483,9 @@ static int __init pci_proc_init(void)
 	proc_create("devices", 0, proc_bus_pci_dir,
 		    &proc_bus_pci_dev_operations);
 	proc_initialized = 1;
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev)
 		pci_proc_attach_device(dev);
-	}
+
 	return 0;
 }
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 477345d4164..89ed181cd90 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -91,6 +91,19 @@ static void __devinit quirk_resource_alignment(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_resource_alignment);
 
+/*
+ * Decoding should be disabled for a PCI device during BAR sizing to avoid
+ * conflict. But doing so may cause problems on host bridge and perhaps other
+ * key system devices. For devices that need to have mmio decoding always-on,
+ * we need to set the dev->mmio_always_on bit.
+ */
+static void __devinit quirk_mmio_always_on(struct pci_dev *dev)
+{
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+		dev->mmio_always_on = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, quirk_mmio_always_on);
+
 /* The Mellanox Tavor device gives false positive parity errors
  * Mark this device with a broken_parity_status, to allow
  * PCI scanning code to "skip" this now blacklisted device.
@@ -1459,6 +1472,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
 	case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
+	case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
 		/* The controller should be in single function ahci mode */
 		conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
 		break;
@@ -1470,6 +1484,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 		/* Fall through */
 	case PCI_DEVICE_ID_JMICRON_JMB361:
 	case PCI_DEVICE_ID_JMICRON_JMB363:
+	case PCI_DEVICE_ID_JMICRON_JMB369:
 		/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
 		/* Set the class codes correctly and then direct IDE 0 */
 		conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
@@ -1496,16 +1511,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, qui
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
 
 #endif
 
@@ -2115,6 +2134,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disabl
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
 
 /* Disable MSI on chipsets that are known to not support it */
 static void __devinit quirk_disable_msi(struct pci_dev *dev)
@@ -2126,12 +2146,29 @@ static void __devinit quirk_disable_msi(struct pci_dev *dev)
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9602, quirk_disable_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK, 0x9602, quirk_disable_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AI, 0x9602, quirk_disable_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
 
+/*
+ * The APC bridge device in AMD 780 family northbridges has some random
+ * OEM subsystem ID in its vendor ID register (erratum 18), so instead
+ * we use the possible vendor/device IDs of the host bridge for the
+ * declared quirk, and search for the APC bridge by slot number.
+ */
+static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
+{
+	struct pci_dev *apc_bridge;
+
+	apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
+	if (apc_bridge) {
+		if (apc_bridge->device == 0x9602)
+			quirk_disable_msi(apc_bridge);
+		pci_dev_put(apc_bridge);
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
+
 /* Go through the list of Hypertransport capabilities and
  * return 1 if a HT MSI capability is found and enabled */
 static int __devinit msi_ht_cap_enabled(struct pci_dev *dev)
@@ -2390,6 +2427,9 @@ static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
 	int pos;
 	int found;
 
+	if (!pci_msi_enabled())
+		return;
+
 	/* check if there is HT MSI cap or enabled on this device */
 	found = ht_check_msi_mapping(dev);
 
@@ -2742,7 +2782,7 @@ static int __init pci_apply_final_quirks(void)
 		printk(KERN_DEBUG "PCI: CLS %u bytes\n",
 		       pci_cache_line_size << 2);
 
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 		pci_fixup_device(pci_fixup_final, dev);
 		/*
 		 * If arch hasn't set it explicitly yet, use the CLS
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 20d03f77228..9d75dc8ca60 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -169,7 +169,7 @@ struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
 {
 	struct pci_dev *dev = NULL;
 
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev) {
 		if (pci_domain_nr(dev->bus) == domain &&
 		    (dev->bus->number == bus && dev->devfn == devfn))
 			return dev;
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 19b111383f6..66cb8f4cc5f 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -874,19 +874,16 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
 again:
 	pci_bus_size_bridges(parent);
 	__pci_bridge_assign_resources(bridge, &head);
-	retval = pci_reenable_device(bridge);
-	pci_set_master(bridge);
-	pci_enable_bridges(parent);
 
 	tried_times++;
 
 	if (!head.next)
-		return;
+		goto enable_all;
 
 	if (tried_times >= 2) {
 		/* still fail, don't need to try more */
 		free_failed_list(&head);
-		return;
+		goto enable_all;
 	}
 
 	printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
@@ -919,5 +916,10 @@ again:
 	free_failed_list(&head);
 
 	goto again;
+
+enable_all:
+	retval = pci_reenable_device(bridge);
+	pci_set_master(bridge);
+	pci_enable_bridges(parent);
 }
 EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
index aa795fd428d..eec9738f349 100644
--- a/drivers/pci/setup-irq.c
+++ b/drivers/pci/setup-irq.c
@@ -59,7 +59,6 @@ pci_fixup_irqs(u8 (*swizzle)(struct pci_dev *, u8 *),
 	       int (*map_irq)(struct pci_dev *, u8, u8))
 {
 	struct pci_dev *dev = NULL;
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+	for_each_pci_dev(dev)
 		pdev_fixup_irq(dev, swizzle, map_irq);
-	}
 }
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index d0f5ad30607..c988514eb55 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -157,11 +157,11 @@ config PCMCIA_M8XX
 
 config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
-	depends on SOC_AU1X00 && PCMCIA
+	depends on MIPS_ALCHEMY && PCMCIA
 
 config PCMCIA_ALCHEMY_DEVBOARD
 	tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
-	depends on SOC_AU1X00 && PCMCIA
+	depends on MIPS_ALCHEMY && PCMCIA
 	select 64BIT_PHYS_ADDR
 	help
 	  Enable this driver of you want PCMCIA support on your Alchemy
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index d006e8beab9..7a2b1604bf1 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -7,7 +7,6 @@ pcmcia_core-$(CONFIG_CARDBUS)			+= cardbus.o
 obj-$(CONFIG_PCCARD)				+= pcmcia_core.o
 
 pcmcia-y					+= ds.o pcmcia_resource.o cistpl.o pcmcia_cis.o
-pcmcia-$(CONFIG_PCMCIA_IOCTL)			+= pcmcia_ioctl.o
 obj-$(CONFIG_PCMCIA)				+= pcmcia.o
 
 pcmcia_rsrc-y					+= rsrc_mgr.o
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index a324d329dea..67530cefcf3 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -23,7 +23,6 @@
 
 /* include the world */
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index 5a979cb8f3e..807f2d75dad 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -31,11 +31,9 @@
 #include <linux/proc_fs.h>
 #include <linux/types.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 8844bc3e311..91414a0ddc4 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -27,7 +27,6 @@
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cisreg.h>
@@ -54,6 +53,9 @@ static const u_int exponent[] = {
 /* Upper limit on reasonable # of tuples */
 #define MAX_TUPLES		200
 
+/* Bits in IRQInfo1 field */
+#define IRQ_INFO2_VALID		0x10
+
 /* 16-bit CIS? */
 static int cis_width;
 module_param(cis_width, int, 0444);
@@ -210,7 +212,7 @@ int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
  * Probably only useful for writing one-byte registers. Must be called
  * with ops_mutex held.
  */
-void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
+int pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 		   u_int len, void *ptr)
 {
 	void __iomem *sys, *end;
@@ -232,7 +234,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 				((cis_width) ? MAP_16BIT : 0));
 		if (!sys) {
 			dev_dbg(&s->dev, "could not map memory\n");
-			return; /* FIXME: Error */
+			return -EINVAL;
 		}
 
 		writeb(flags, sys+CISREG_ICTRL0);
@@ -257,7 +259,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 			sys = set_cis_map(s, card_offset, flags);
 			if (!sys) {
 				dev_dbg(&s->dev, "could not map memory\n");
-				return; /* FIXME: error */
+				return -EINVAL;
 			}
 
 			end = sys + s->map_size;
@@ -271,6 +273,7 @@ void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 			addr = 0;
 		}
 	}
+	return 0;
 }
 
 
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 976d80706ea..2ec8ac97445 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -32,7 +32,6 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -252,38 +251,6 @@ struct pcmcia_socket *pcmcia_get_socket_by_nr(unsigned int nr)
 }
 EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
 
-/*
- * The central event handler.  Send_event() sends an event to the
- * 16-bit subsystem, which then calls the relevant device drivers.
- * Parse_events() interprets the event bits from
- * a card status change report.  Do_shutdown() handles the high
- * priority stuff associated with a card removal.
- */
-
-/* NOTE: send_event needs to be called with skt->sem held. */
-
-static int send_event(struct pcmcia_socket *s, event_t event, int priority)
-{
-	int ret;
-
-	if ((s->state & SOCKET_CARDBUS) && (event != CS_EVENT_CARD_REMOVAL))
-		return 0;
-
-	dev_dbg(&s->dev, "send_event(event %d, pri %d, callback 0x%p)\n",
-	   event, priority, s->callback);
-
-	if (!s->callback)
-		return 0;
-	if (!try_module_get(s->callback->owner))
-		return 0;
-
-	ret = s->callback->event(s, event, priority);
-
-	module_put(s->callback->owner);
-
-	return ret;
-}
-
 static int socket_reset(struct pcmcia_socket *skt)
 {
 	int status, i;
@@ -326,7 +293,8 @@ static void socket_shutdown(struct pcmcia_socket *s)
 
 	dev_dbg(&s->dev, "shutdown\n");
 
-	send_event(s, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
+	if (s->callback)
+		s->callback->remove(s);
 
 	mutex_lock(&s->ops_mutex);
 	s->state &= SOCKET_INUSE | SOCKET_PRESENT;
@@ -477,7 +445,8 @@ static int socket_insert(struct pcmcia_socket *skt)
 		dev_dbg(&skt->dev, "insert done\n");
 		mutex_unlock(&skt->ops_mutex);
 
-		send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
+		if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+			skt->callback->add(skt);
 	} else {
 		mutex_unlock(&skt->ops_mutex);
 		socket_shutdown(skt);
@@ -494,7 +463,6 @@ static int socket_suspend(struct pcmcia_socket *skt)
 	mutex_lock(&skt->ops_mutex);
 	skt->suspended_state = skt->state;
 
-	send_event(skt, CS_EVENT_PM_SUSPEND, CS_EVENT_PRI_LOW);
 	skt->socket = dead_socket;
 	skt->ops->set_socket(skt, &skt->socket);
 	if (skt->ops->suspend)
@@ -555,8 +523,8 @@ static int socket_late_resume(struct pcmcia_socket *skt)
 		return 0;
 	}
 #endif
-
-	send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
+	if (!(skt->state & SOCKET_CARDBUS) && (skt->callback))
+		skt->callback->early_resume(skt);
 	return 0;
 }
 
@@ -654,16 +622,8 @@ static int pccardd(void *__skt)
 		spin_unlock_irqrestore(&skt->thread_lock, flags);
 
 		mutex_lock(&skt->skt_mutex);
-		if (events) {
-			if (events & SS_DETECT)
-				socket_detect_change(skt);
-			if (events & SS_BATDEAD)
-				send_event(skt, CS_EVENT_BATTERY_DEAD, CS_EVENT_PRI_LOW);
-			if (events & SS_BATWARN)
-				send_event(skt, CS_EVENT_BATTERY_LOW, CS_EVENT_PRI_LOW);
-			if (events & SS_READY)
-				send_event(skt, CS_EVENT_READY_CHANGE, CS_EVENT_PRI_LOW);
-		}
+		if (events & SS_DETECT)
+			socket_detect_change(skt);
 
 		if (sysfs_events) {
 			if (sysfs_events & PCMCIA_UEVENT_EJECT)
@@ -783,7 +743,7 @@ int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c)
 		s->callback = c;
 
 		if ((s->state & (SOCKET_PRESENT|SOCKET_CARDBUS)) == SOCKET_PRESENT)
-			send_event(s, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
+			s->callback->add(s);
 	} else
 		s->callback = NULL;
  err:
@@ -823,20 +783,13 @@ int pcmcia_reset_card(struct pcmcia_socket *skt)
 			break;
 		}
 
-		ret = send_event(skt, CS_EVENT_RESET_REQUEST, CS_EVENT_PRI_LOW);
-		if (ret == 0) {
-			send_event(skt, CS_EVENT_RESET_PHYSICAL, CS_EVENT_PRI_LOW);
-			if (skt->callback)
-				skt->callback->suspend(skt);
-			mutex_lock(&skt->ops_mutex);
-			ret = socket_reset(skt);
-			mutex_unlock(&skt->ops_mutex);
-			if (ret == 0) {
-				send_event(skt, CS_EVENT_CARD_RESET, CS_EVENT_PRI_LOW);
-				if (skt->callback)
-					skt->callback->resume(skt);
-			}
-		}
+		if (skt->callback)
+			skt->callback->suspend(skt);
+		mutex_lock(&skt->ops_mutex);
+		ret = socket_reset(skt);
+		mutex_unlock(&skt->ops_mutex);
+		if ((ret == 0) && (skt->callback))
+			skt->callback->resume(skt);
 
 		ret = 0;
 	} while (0);
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 4126a75445e..da055dc14d9 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -10,7 +10,7 @@
  * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  *
  * (C) 1999		David A. Hinds
- * (C) 2003 - 2008	Dominik Brodowski
+ * (C) 2003 - 2010	Dominik Brodowski
  *
  *
  * This file contains definitions _only_ needed by the PCMCIA core modules.
@@ -26,6 +26,9 @@
 /* Flags in client state */
 #define CLIENT_WIN_REQ(i)	(0x1<<(i))
 
+/* Flag to access all functions */
+#define BIND_FN_ALL	0xff
+
 /* Each card function gets one of these guys */
 typedef struct config_t {
 	struct kref	ref;
@@ -35,7 +38,10 @@ typedef struct config_t {
 	unsigned int	ConfigBase;
 	unsigned char	Status, Pin, Copy, Option, ExtStatus;
 	unsigned int	CardValues;
-	io_req_t	io;
+
+	struct resource io[MAX_IO_WIN]; /* io ports */
+	struct resource mem[MAX_WIN];   /* mem areas */
+
 	struct {
 		u_int	Attributes;
 	} irq;
@@ -56,18 +62,11 @@ struct pccard_resource_ops {
 					 unsigned int attr,
 					 unsigned int *base,
 					 unsigned int num,
-					 unsigned int align);
+					 unsigned int align,
+					 struct resource **parent);
 	struct resource* (*find_mem)	(unsigned long base, unsigned long num,
 					 unsigned long align, int low,
 					 struct pcmcia_socket *s);
-	int	(*add_io)		(struct pcmcia_socket *s,
-					 unsigned int action,
-					 unsigned long r_start,
-					 unsigned long r_end);
-	int	(*add_mem)		(struct pcmcia_socket *s,
-					 unsigned int action,
-					 unsigned long r_start,
-					 unsigned long r_end);
 	int	(*init)			(struct pcmcia_socket *s);
 	void	(*exit)			(struct pcmcia_socket *s);
 };
@@ -114,11 +113,12 @@ void cb_free(struct pcmcia_socket *s);
 
 struct pcmcia_callback{
 	struct module	*owner;
-	int		(*event) (struct pcmcia_socket *s,
-				  event_t event, int priority);
+	int		(*add) (struct pcmcia_socket *s);
+	int		(*remove) (struct pcmcia_socket *s);
 	void		(*requery) (struct pcmcia_socket *s);
 	int		(*validate) (struct pcmcia_socket *s, unsigned int *i);
 	int		(*suspend) (struct pcmcia_socket *s);
+	int		(*early_resume) (struct pcmcia_socket *s);
 	int		(*resume) (struct pcmcia_socket *s);
 };
 
@@ -146,6 +146,8 @@ void pcmcia_put_socket(struct pcmcia_socket *skt);
 /* ds.c */
 extern struct bus_type pcmcia_bus_type;
 
+struct pcmcia_device;
+
 /* pcmcia_resource.c */
 extern int pcmcia_release_configuration(struct pcmcia_device *p_dev);
 extern int pcmcia_validate_mem(struct pcmcia_socket *s);
@@ -163,8 +165,8 @@ extern struct bin_attribute pccard_cis_attr;
 
 int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
 			u_int addr, u_int len, void *ptr);
-void pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
-			  u_int addr, u_int len, void *ptr);
+int pcmcia_write_cis_mem(struct pcmcia_socket *s, int attr,
+			u_int addr, u_int len, void *ptr);
 void release_cis_mem(struct pcmcia_socket *s);
 void destroy_cis_cache(struct pcmcia_socket *s);
 int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function,
@@ -188,34 +190,4 @@ int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function,
 
 int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
 
-
-#ifdef CONFIG_PCMCIA_IOCTL
-/* ds.c */
-extern struct pcmcia_device *pcmcia_get_dev(struct pcmcia_device *p_dev);
-extern void pcmcia_put_dev(struct pcmcia_device *p_dev);
-
-struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
-					unsigned int function);
-
-/* pcmcia_ioctl.c */
-extern void __init pcmcia_setup_ioctl(void);
-extern void __exit pcmcia_cleanup_ioctl(void);
-extern void handle_event(struct pcmcia_socket *s, event_t event);
-extern int handle_request(struct pcmcia_socket *s, event_t event);
-
-#else /* CONFIG_PCMCIA_IOCTL */
-
-static inline void __init pcmcia_setup_ioctl(void) { return; }
-static inline void __exit pcmcia_cleanup_ioctl(void) { return; }
-static inline void handle_event(struct pcmcia_socket *s, event_t event)
-{
-	return;
-}
-static inline int handle_request(struct pcmcia_socket *s, event_t event)
-{
-	return 0;
-}
-
-#endif /* CONFIG_PCMCIA_IOCTL */
-
 #endif /* _LINUX_CS_INTERNAL_H */
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 0f4cc3f0002..27575e6378a 100644
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 
 #include <asm/mach-au1x00/au1000.h>
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index eac961463be..55570d9e1e4 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -10,7 +10,7 @@
  * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  *
  * (C) 1999		David A. Hinds
- * (C) 2003 - 2006	Dominik Brodowski
+ * (C) 2003 - 2010	Dominik Brodowski
  */
 
 #include <linux/kernel.h>
@@ -26,7 +26,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -213,7 +212,7 @@ EXPORT_SYMBOL(pcmcia_unregister_driver);
 
 /* pcmcia_device handling */
 
-struct pcmcia_device *pcmcia_get_dev(struct pcmcia_device *p_dev)
+static struct pcmcia_device *pcmcia_get_dev(struct pcmcia_device *p_dev)
 {
 	struct device *tmp_dev;
 	tmp_dev = get_device(&p_dev->dev);
@@ -222,7 +221,7 @@ struct pcmcia_device *pcmcia_get_dev(struct pcmcia_device *p_dev)
 	return to_pcmcia_dev(tmp_dev);
 }
 
-void pcmcia_put_dev(struct pcmcia_device *p_dev)
+static void pcmcia_put_dev(struct pcmcia_device *p_dev)
 {
 	if (p_dev)
 		put_device(&p_dev->dev);
@@ -294,7 +293,7 @@ static int pcmcia_device_probe(struct device *dev)
 	}
 
 	mutex_lock(&s->ops_mutex);
-	if ((s->pcmcia_state.has_pfc) &&
+	if ((s->pcmcia_pfc) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_parse_uevents(s, PCMCIA_UEVENT_REQUERY);
 	mutex_unlock(&s->ops_mutex);
@@ -359,7 +358,7 @@ static int pcmcia_device_remove(struct device *dev)
 	 * pseudo multi-function card, we need to unbind
 	 * all devices
 	 */
-	if ((p_dev->socket->pcmcia_state.has_pfc) &&
+	if ((p_dev->socket->pcmcia_pfc) &&
 	    (p_dev->socket->device_count > 0) &&
 	    (p_dev->device_no == 0))
 		pcmcia_card_remove(p_dev->socket, p_dev);
@@ -477,7 +476,8 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev)
 }
 
 
-struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int function)
+static struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s,
+					       unsigned int function)
 {
 	struct pcmcia_device *p_dev, *tmp_dev;
 	int i;
@@ -531,7 +531,6 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
 	list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list)
 		if (p_dev->func == tmp_dev->func) {
 			p_dev->function_config = tmp_dev->function_config;
-			p_dev->io = tmp_dev->io;
 			p_dev->irq = tmp_dev->irq;
 			kref_get(&p_dev->function_config->ref);
 		}
@@ -544,15 +543,29 @@ struct pcmcia_device *pcmcia_device_add(struct pcmcia_socket *s, unsigned int fu
 			"IRQ setup failed -- device might not work\n");
 
 	if (!p_dev->function_config) {
+		config_t *c;
 		dev_dbg(&p_dev->dev, "creating config_t\n");
-		p_dev->function_config = kzalloc(sizeof(struct config_t),
-						 GFP_KERNEL);
-		if (!p_dev->function_config) {
+		c = kzalloc(sizeof(struct config_t), GFP_KERNEL);
+		if (!c) {
 			mutex_unlock(&s->ops_mutex);
 			goto err_unreg;
 		}
-		kref_init(&p_dev->function_config->ref);
+		p_dev->function_config = c;
+		kref_init(&c->ref);
+		for (i = 0; i < MAX_IO_WIN; i++) {
+			c->io[i].name = p_dev->devname;
+			c->io[i].flags = IORESOURCE_IO;
+		}
+		for (i = 0; i< MAX_WIN; i++) {
+			c->mem[i].name = p_dev->devname;
+			c->mem[i].flags = IORESOURCE_MEM;
+		}
 	}
+	for (i = 0; i < MAX_IO_WIN; i++)
+		p_dev->resource[i] = &p_dev->function_config->io[i];
+	for (; i < (MAX_IO_WIN + MAX_WIN); i++)
+		p_dev->resource[i] = &p_dev->function_config->mem[i-MAX_IO_WIN];
+
 	mutex_unlock(&s->ops_mutex);
 
 	dev_printk(KERN_NOTICE, &p_dev->dev,
@@ -680,7 +693,7 @@ static void pcmcia_requery(struct pcmcia_socket *s)
 	 * call pcmcia_device_add() -- which will fail if both
 	 * devices are already registered. */
 	mutex_lock(&s->ops_mutex);
-	has_pfc = s->pcmcia_state.has_pfc;
+	has_pfc = s->pcmcia_pfc;
 	mutex_unlock(&s->ops_mutex);
 	if (has_pfc)
 		pcmcia_device_add(s, 0);
@@ -812,7 +825,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 	if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
 		dev_dbg(&dev->dev, "this is a pseudo-multi-function device\n");
 		mutex_lock(&dev->socket->ops_mutex);
-		dev->socket->pcmcia_state.has_pfc = 1;
+		dev->socket->pcmcia_pfc = 1;
 		mutex_unlock(&dev->socket->ops_mutex);
 		if (dev->device_no != did->device_no)
 			return 0;
@@ -826,7 +839,7 @@ static inline int pcmcia_devmatch(struct pcmcia_device *dev,
 
 		/* if this is a pseudo-multi-function device,
 		 * we need explicit matches */
-		if (dev->socket->pcmcia_state.has_pfc)
+		if (dev->socket->pcmcia_pfc)
 			return 0;
 		if (dev->device_no)
 			return 0;
@@ -885,14 +898,6 @@ static int pcmcia_bus_match(struct device *dev, struct device_driver *drv)
 	}
 	mutex_unlock(&p_drv->dynids.lock);
 
-#ifdef CONFIG_PCMCIA_IOCTL
-	/* matching by cardmgr */
-	if (p_dev->cardmgr == p_drv) {
-		dev_dbg(dev, "cardmgr matched to %s\n", drv->name);
-		return 1;
-	}
-#endif
-
 	while (did && did->match_flags) {
 		dev_dbg(dev, "trying to match to %s\n", drv->name);
 		if (pcmcia_devmatch(p_dev, did)) {
@@ -1006,6 +1011,18 @@ pcmcia_device_stringattr(prod_id2, prod_id[1]);
 pcmcia_device_stringattr(prod_id3, prod_id[2]);
 pcmcia_device_stringattr(prod_id4, prod_id[3]);
 
+static ssize_t pcmcia_show_resources(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
+	char *str = buf;
+	int i;
+
+	for (i = 0; i < PCMCIA_NUM_RESOURCES; i++)
+		str += sprintf(str, "%pr\n", p_dev->resource[i]);
+
+	return str - buf;
+}
 
 static ssize_t pcmcia_show_pm_state(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1076,6 +1093,7 @@ static ssize_t pcmcia_store_allow_func_id_match(struct device *dev,
 static struct device_attribute pcmcia_dev_attrs[] = {
 	__ATTR(function, 0444, func_show, NULL),
 	__ATTR(pm_state, 0644, pcmcia_show_pm_state, pcmcia_store_pm_state),
+	__ATTR(resources, 0444, pcmcia_show_resources, NULL),
 	__ATTR_RO(func_id),
 	__ATTR_RO(manf_id),
 	__ATTR_RO(card_id),
@@ -1215,86 +1233,57 @@ static int pcmcia_bus_suspend(struct pcmcia_socket *skt)
 	return 0;
 }
 
+static int pcmcia_bus_remove(struct pcmcia_socket *skt)
+{
+	atomic_set(&skt->present, 0);
+	pcmcia_card_remove(skt, NULL);
 
-/*======================================================================
+	mutex_lock(&skt->ops_mutex);
+	destroy_cis_cache(skt);
+	pcmcia_cleanup_irq(skt);
+	mutex_unlock(&skt->ops_mutex);
 
-    The card status event handler.
+	return 0;
+}
 
-======================================================================*/
+static int pcmcia_bus_add(struct pcmcia_socket *skt)
+{
+	atomic_set(&skt->present, 1);
 
-/* Normally, the event is passed to individual drivers after
- * informing userspace. Only for CS_EVENT_CARD_REMOVAL this
- * is inversed to maintain historic compatibility.
- */
+	mutex_lock(&skt->ops_mutex);
+	skt->pcmcia_pfc = 0;
+	destroy_cis_cache(skt); /* to be on the safe side... */
+	mutex_unlock(&skt->ops_mutex);
 
-static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
-{
-	struct pcmcia_socket *s = pcmcia_get_socket(skt);
+	pcmcia_card_add(skt);
 
-	if (!s) {
-		dev_printk(KERN_ERR, &skt->dev,
-			   "PCMCIA obtaining reference to socket "	\
-			   "failed, event 0x%x lost!\n", event);
-		return -ENODEV;
-	}
+	return 0;
+}
 
-	dev_dbg(&skt->dev, "ds_event(0x%06x, %d, 0x%p)\n",
-		   event, priority, skt);
+static int pcmcia_bus_early_resume(struct pcmcia_socket *skt)
+{
+	if (!verify_cis_cache(skt)) {
+		pcmcia_put_socket(skt);
+		return 0;
+	}
 
-	switch (event) {
-	case CS_EVENT_CARD_REMOVAL:
-		atomic_set(&skt->present, 0);
-		pcmcia_card_remove(skt, NULL);
-		handle_event(skt, event);
-		mutex_lock(&s->ops_mutex);
-		destroy_cis_cache(s);
-		pcmcia_cleanup_irq(s);
-		mutex_unlock(&s->ops_mutex);
-		break;
+	dev_dbg(&skt->dev, "cis mismatch - different card\n");
 
-	case CS_EVENT_CARD_INSERTION:
-		atomic_set(&skt->present, 1);
-		mutex_lock(&s->ops_mutex);
-		s->pcmcia_state.has_pfc = 0;
-		destroy_cis_cache(s); /* to be on the safe side... */
-		mutex_unlock(&s->ops_mutex);
-		pcmcia_card_add(skt);
-		handle_event(skt, event);
-		break;
-
-	case CS_EVENT_EJECTION_REQUEST:
-		break;
-
-	case CS_EVENT_PM_RESUME:
-		if (verify_cis_cache(skt) != 0) {
-			dev_dbg(&skt->dev, "cis mismatch - different card\n");
-			/* first, remove the card */
-			ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
-			mutex_lock(&s->ops_mutex);
-			destroy_cis_cache(skt);
-			kfree(skt->fake_cis);
-			skt->fake_cis = NULL;
-			s->functions = 0;
-			mutex_unlock(&s->ops_mutex);
-			/* now, add the new card */
-			ds_event(skt, CS_EVENT_CARD_INSERTION,
-				 CS_EVENT_PRI_LOW);
-		}
-		handle_event(skt, event);
-		break;
+	/* first, remove the card */
+	pcmcia_bus_remove(skt);
 
-	case CS_EVENT_PM_SUSPEND:
-	case CS_EVENT_RESET_PHYSICAL:
-	case CS_EVENT_CARD_RESET:
-	default:
-		handle_event(skt, event);
-		break;
-    }
+	mutex_lock(&skt->ops_mutex);
+	destroy_cis_cache(skt);
+	kfree(skt->fake_cis);
+	skt->fake_cis = NULL;
+	skt->functions = 0;
+	mutex_unlock(&skt->ops_mutex);
 
-    pcmcia_put_socket(s);
+	/* now, add the new card */
+	pcmcia_bus_add(skt);
+	return 0;
+}
 
-    return 0;
-} /* ds_event */
 
 /*
  * NOTE: This is racy. There's no guarantee the card will still be
@@ -1323,10 +1312,12 @@ EXPORT_SYMBOL(pcmcia_dev_present);
 
 static struct pcmcia_callback pcmcia_bus_callback = {
 	.owner = THIS_MODULE,
-	.event = ds_event,
+	.add = pcmcia_bus_add,
+	.remove = pcmcia_bus_remove,
 	.requery = pcmcia_requery,
 	.validate = pccard_validate_cis,
 	.suspend = pcmcia_bus_suspend,
+	.early_resume = pcmcia_bus_early_resume,
 	.resume = pcmcia_bus_resume,
 };
 
@@ -1350,11 +1341,8 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev,
 		return ret;
 	}
 
-#ifdef CONFIG_PCMCIA_IOCTL
-	init_waitqueue_head(&socket->queue);
-#endif
 	INIT_LIST_HEAD(&socket->devices_list);
-	memset(&socket->pcmcia_state, 0, sizeof(u8));
+	socket->pcmcia_pfc = 0;
 	socket->device_count = 0;
 	atomic_set(&socket->present, 0);
 
@@ -1429,8 +1417,6 @@ static int __init init_pcmcia_bus(void)
 		return ret;
 	}
 
-	pcmcia_setup_ioctl();
-
 	return 0;
 }
 fs_initcall(init_pcmcia_bus); /* one level after subsys_initcall so that
@@ -1439,8 +1425,6 @@ fs_initcall(init_pcmcia_bus); /* one level after subsys_initcall so that
 
 static void __exit exit_pcmcia_bus(void)
 {
-	pcmcia_cleanup_ioctl();
-
 	class_interface_unregister(&pcmcia_bus_interface);
 
 	bus_unregister(&pcmcia_bus_type);
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 3003bb3dfcc..05d0879ce93 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -15,7 +15,6 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 9e2a15628de..61746bd598b 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -50,7 +50,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 7e16ed8eb0a..24de4992586 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 6c5c3f910d7..8e4723844ad 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -27,7 +27,6 @@
 #include <asm/system.h>
 #include <asm/addrspace.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 25e5e30a18a..f2f90a7d3e1 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -59,7 +59,6 @@
 #include <asm/irq.h>
 #include <asm/fs_pd.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 
diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c
index 4a65eaf96b0..0ac54da1588 100644
--- a/drivers/pcmcia/pcmcia_cis.c
+++ b/drivers/pcmcia/pcmcia_cis.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ss.h>
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
deleted file mode 100644
index d007a2a0383..00000000000
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ /dev/null
@@ -1,1077 +0,0 @@
-/*
- * pcmcia_ioctl.c -- ioctl interface for cardmgr and cardctl
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * (C) 1999		David A. Hinds
- * (C) 2003 - 2004	Dominik Brodowski
- */
-
-/*
- * This file will go away soon.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/ioctl.h>
-#include <linux/proc_fs.h>
-#include <linux/poll.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/seq_file.h>
-#include <linux/smp_lock.h>
-#include <linux/workqueue.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/ss.h>
-
-#include "cs_internal.h"
-
-static int major_dev = -1;
-
-
-/* Device user information */
-#define MAX_EVENTS	32
-#define USER_MAGIC	0x7ea4
-#define CHECK_USER(u) \
-    (((u) == NULL) || ((u)->user_magic != USER_MAGIC))
-
-typedef struct user_info_t {
-	u_int			user_magic;
-	int			event_head, event_tail;
-	event_t			event[MAX_EVENTS];
-	struct user_info_t	*next;
-	struct pcmcia_socket	*socket;
-} user_info_t;
-
-
-static struct pcmcia_device *get_pcmcia_device(struct pcmcia_socket *s,
-						unsigned int function)
-{
-	struct pcmcia_device *p_dev = NULL;
-
-	mutex_lock(&s->ops_mutex);
-	list_for_each_entry(p_dev, &s->devices_list, socket_device_list) {
-		if (p_dev->func == function) {
-			mutex_unlock(&s->ops_mutex);
-			return pcmcia_get_dev(p_dev);
-		}
-	}
-	mutex_unlock(&s->ops_mutex);
-	return NULL;
-}
-
-/* backwards-compatible accessing of driver --- by name! */
-
-static struct pcmcia_driver *get_pcmcia_driver(dev_info_t *dev_info)
-{
-	struct device_driver *drv;
-	struct pcmcia_driver *p_drv;
-
-	drv = driver_find((char *) dev_info, &pcmcia_bus_type);
-	if (!drv)
-		return NULL;
-
-	p_drv = container_of(drv, struct pcmcia_driver, drv);
-
-	return p_drv;
-}
-
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *proc_pccard;
-
-static int proc_read_drivers_callback(struct device_driver *driver, void *_m)
-{
-	struct seq_file *m = _m;
-	struct pcmcia_driver *p_drv = container_of(driver,
-						   struct pcmcia_driver, drv);
-
-	seq_printf(m, "%-24.24s 1 %d\n", p_drv->drv.name,
-#ifdef CONFIG_MODULE_UNLOAD
-		      (p_drv->owner) ? module_refcount(p_drv->owner) : 1
-#else
-		      1
-#endif
-	);
-	return 0;
-}
-
-static int pccard_drivers_proc_show(struct seq_file *m, void *v)
-{
-	return bus_for_each_drv(&pcmcia_bus_type, NULL,
-				m, proc_read_drivers_callback);
-}
-
-static int pccard_drivers_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, pccard_drivers_proc_show, NULL);
-}
-
-static const struct file_operations pccard_drivers_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= pccard_drivers_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif
-
-
-#ifdef CONFIG_PCMCIA_PROBE
-
-static int adjust_irq(struct pcmcia_socket *s, adjust_t *adj)
-{
-	int irq;
-	u32 mask;
-
-	irq = adj->resource.irq.IRQ;
-	if ((irq < 0) || (irq > 15))
-		return -EINVAL;
-
-	if (adj->Action != REMOVE_MANAGED_RESOURCE)
-		return 0;
-
-	mask = 1 << irq;
-
-	if (!(s->irq_mask & mask))
-		return 0;
-
-	s->irq_mask &= ~mask;
-
-	return 0;
-}
-
-#else
-
-static inline int adjust_irq(struct pcmcia_socket *s, adjust_t *adj)
-{
-	return 0;
-}
-
-#endif
-
-static int pcmcia_adjust_resource_info(adjust_t *adj)
-{
-	struct pcmcia_socket *s;
-	int ret = -ENOSYS;
-
-	down_read(&pcmcia_socket_list_rwsem);
-	list_for_each_entry(s, &pcmcia_socket_list, socket_list) {
-
-		if (adj->Resource == RES_IRQ)
-			ret = adjust_irq(s, adj);
-
-		else if (s->resource_ops->add_io) {
-			unsigned long begin, end;
-
-			/* you can't use the old interface if the new
-			 * one was used before */
-			mutex_lock(&s->ops_mutex);
-			if ((s->resource_setup_new) &&
-			    !(s->resource_setup_old)) {
-				mutex_unlock(&s->ops_mutex);
-				continue;
-			} else if (!(s->resource_setup_old))
-				s->resource_setup_old = 1;
-
-			switch (adj->Resource) {
-			case RES_MEMORY_RANGE:
-				begin = adj->resource.memory.Base;
-				end = adj->resource.memory.Base + adj->resource.memory.Size - 1;
-				if (s->resource_ops->add_mem)
-					ret = s->resource_ops->add_mem(s, adj->Action, begin, end);
-			case RES_IO_RANGE:
-				begin = adj->resource.io.BasePort;
-				end = adj->resource.io.BasePort + adj->resource.io.NumPorts - 1;
-				if (s->resource_ops->add_io)
-					ret = s->resource_ops->add_io(s, adj->Action, begin, end);
-			}
-			if (!ret) {
-				/* as there's no way we know this is the
-				 * last call to adjust_resource_info, we
-				 * always need to assume this is the latest
-				 * one... */
-				s->resource_setup_done = 1;
-			}
-			mutex_unlock(&s->ops_mutex);
-		}
-	}
-	up_read(&pcmcia_socket_list_rwsem);
-
-	return ret;
-}
-
-
-/** pcmcia_get_window
- */
-static int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *wh_out,
-			window_handle_t wh, win_req_t *req)
-{
-	pccard_mem_map *win;
-	window_handle_t w;
-
-	wh--;
-	if (!s || !(s->state & SOCKET_PRESENT))
-		return -ENODEV;
-	if (wh >= MAX_WIN)
-		return -EINVAL;
-	for (w = wh; w < MAX_WIN; w++)
-		if (s->state & SOCKET_WIN_REQ(w))
-			break;
-	if (w == MAX_WIN)
-		return -EINVAL;
-	win = &s->win[w];
-	req->Base = win->res->start;
-	req->Size = win->res->end - win->res->start + 1;
-	req->AccessSpeed = win->speed;
-	req->Attributes = 0;
-	if (win->flags & MAP_ATTRIB)
-		req->Attributes |= WIN_MEMORY_TYPE_AM;
-	if (win->flags & MAP_ACTIVE)
-		req->Attributes |= WIN_ENABLE;
-	if (win->flags & MAP_16BIT)
-		req->Attributes |= WIN_DATA_WIDTH_16;
-	if (win->flags & MAP_USE_WAIT)
-		req->Attributes |= WIN_USE_WAIT;
-
-	*wh_out = w + 1;
-	return 0;
-} /* pcmcia_get_window */
-
-
-/** pcmcia_get_mem_page
- *
- * Change the card address of an already open memory window.
- */
-static int pcmcia_get_mem_page(struct pcmcia_socket *skt, window_handle_t wh,
-			memreq_t *req)
-{
-	wh--;
-	if (wh >= MAX_WIN)
-		return -EINVAL;
-
-	req->Page = 0;
-	req->CardOffset = skt->win[wh].card_start;
-	return 0;
-} /* pcmcia_get_mem_page */
-
-
-/** pccard_get_status
- *
- * Get the current socket state bits.  We don't support the latched
- * SocketState yet: I haven't seen any point for it.
- */
-
-static int pccard_get_status(struct pcmcia_socket *s,
-			     struct pcmcia_device *p_dev,
-			     cs_status_t *status)
-{
-	config_t *c;
-	int val;
-
-	s->ops->get_status(s, &val);
-	status->CardState = status->SocketState = 0;
-	status->CardState |= (val & SS_DETECT) ? CS_EVENT_CARD_DETECT : 0;
-	status->CardState |= (val & SS_CARDBUS) ? CS_EVENT_CB_DETECT : 0;
-	status->CardState |= (val & SS_3VCARD) ? CS_EVENT_3VCARD : 0;
-	status->CardState |= (val & SS_XVCARD) ? CS_EVENT_XVCARD : 0;
-	if (s->state & SOCKET_SUSPEND)
-		status->CardState |= CS_EVENT_PM_SUSPEND;
-	if (!(s->state & SOCKET_PRESENT))
-		return -ENODEV;
-
-	c = (p_dev) ? p_dev->function_config : NULL;
-
-	if ((c != NULL) && (c->state & CONFIG_LOCKED) &&
-	    (c->IntType & (INT_MEMORY_AND_IO | INT_ZOOMED_VIDEO))) {
-		u_char reg;
-		if (c->CardValues & PRESENT_PIN_REPLACE) {
-			mutex_lock(&s->ops_mutex);
-			pcmcia_read_cis_mem(s, 1, (c->ConfigBase+CISREG_PRR)>>1, 1, &reg);
-			mutex_unlock(&s->ops_mutex);
-			status->CardState |=
-				(reg & PRR_WP_STATUS) ? CS_EVENT_WRITE_PROTECT : 0;
-			status->CardState |=
-				(reg & PRR_READY_STATUS) ? CS_EVENT_READY_CHANGE : 0;
-			status->CardState |=
-				(reg & PRR_BVD2_STATUS) ? CS_EVENT_BATTERY_LOW : 0;
-			status->CardState |=
-				(reg & PRR_BVD1_STATUS) ? CS_EVENT_BATTERY_DEAD : 0;
-		} else {
-			/* No PRR?  Then assume we're always ready */
-			status->CardState |= CS_EVENT_READY_CHANGE;
-		}
-		if (c->CardValues & PRESENT_EXT_STATUS) {
-			mutex_lock(&s->ops_mutex);
-			pcmcia_read_cis_mem(s, 1, (c->ConfigBase+CISREG_ESR)>>1, 1, &reg);
-			mutex_unlock(&s->ops_mutex);
-			status->CardState |=
-				(reg & ESR_REQ_ATTN) ? CS_EVENT_REQUEST_ATTENTION : 0;
-		}
-		return 0;
-	}
-	status->CardState |=
-		(val & SS_WRPROT) ? CS_EVENT_WRITE_PROTECT : 0;
-	status->CardState |=
-		(val & SS_BATDEAD) ? CS_EVENT_BATTERY_DEAD : 0;
-	status->CardState |=
-		(val & SS_BATWARN) ? CS_EVENT_BATTERY_LOW : 0;
-	status->CardState |=
-		(val & SS_READY) ? CS_EVENT_READY_CHANGE : 0;
-	return 0;
-} /* pccard_get_status */
-
-static int pccard_get_configuration_info(struct pcmcia_socket *s,
-				  struct pcmcia_device *p_dev,
-				  config_info_t *config)
-{
-	config_t *c;
-
-	if (!(s->state & SOCKET_PRESENT))
-		return -ENODEV;
-
-
-#ifdef CONFIG_CARDBUS
-	if (s->state & SOCKET_CARDBUS) {
-		memset(config, 0, sizeof(config_info_t));
-		config->Vcc = s->socket.Vcc;
-		config->Vpp1 = config->Vpp2 = s->socket.Vpp;
-		config->Option = s->cb_dev->subordinate->number;
-		if (s->state & SOCKET_CARDBUS_CONFIG) {
-			config->Attributes = CONF_VALID_CLIENT;
-			config->IntType = INT_CARDBUS;
-			config->AssignedIRQ = s->pcmcia_irq;
-			if (config->AssignedIRQ)
-				config->Attributes |= CONF_ENABLE_IRQ;
-			if (s->io[0].res) {
-				config->BasePort1 = s->io[0].res->start;
-				config->NumPorts1 = s->io[0].res->end -
-					config->BasePort1 + 1;
-			}
-		}
-		return 0;
-	}
-#endif
-
-	if (p_dev) {
-		c = p_dev->function_config;
-		config->Function = p_dev->func;
-	} else {
-		c = NULL;
-		config->Function = 0;
-	}
-
-	if ((c == NULL) || !(c->state & CONFIG_LOCKED)) {
-		config->Attributes = 0;
-		config->Vcc = s->socket.Vcc;
-		config->Vpp1 = config->Vpp2 = s->socket.Vpp;
-		return 0;
-	}
-
-	config->Attributes = c->Attributes | CONF_VALID_CLIENT;
-	config->Vcc = s->socket.Vcc;
-	config->Vpp1 = config->Vpp2 = s->socket.Vpp;
-	config->IntType = c->IntType;
-	config->ConfigBase = c->ConfigBase;
-	config->Status = c->Status;
-	config->Pin = c->Pin;
-	config->Copy = c->Copy;
-	config->Option = c->Option;
-	config->ExtStatus = c->ExtStatus;
-	config->Present = config->CardValues = c->CardValues;
-	config->IRQAttributes = c->irq.Attributes;
-	config->AssignedIRQ = s->pcmcia_irq;
-	config->BasePort1 = c->io.BasePort1;
-	config->NumPorts1 = c->io.NumPorts1;
-	config->Attributes1 = c->io.Attributes1;
-	config->BasePort2 = c->io.BasePort2;
-	config->NumPorts2 = c->io.NumPorts2;
-	config->Attributes2 = c->io.Attributes2;
-	config->IOAddrLines = c->io.IOAddrLines;
-
-	return 0;
-} /* pccard_get_configuration_info */
-
-
-/*======================================================================
-
-    These manage a ring buffer of events pending for one user process
-
-======================================================================*/
-
-
-static int queue_empty(user_info_t *user)
-{
-    return (user->event_head == user->event_tail);
-}
-
-static event_t get_queued_event(user_info_t *user)
-{
-    user->event_tail = (user->event_tail+1) % MAX_EVENTS;
-    return user->event[user->event_tail];
-}
-
-static void queue_event(user_info_t *user, event_t event)
-{
-    user->event_head = (user->event_head+1) % MAX_EVENTS;
-    if (user->event_head == user->event_tail)
-	user->event_tail = (user->event_tail+1) % MAX_EVENTS;
-    user->event[user->event_head] = event;
-}
-
-void handle_event(struct pcmcia_socket *s, event_t event)
-{
-    user_info_t *user;
-    for (user = s->user; user; user = user->next)
-	queue_event(user, event);
-    wake_up_interruptible(&s->queue);
-}
-
-
-/*======================================================================
-
-    bind_request() and bind_device() are merged by now. Register_client()
-    is called right at the end of bind_request(), during the driver's
-    ->attach() call. Individual descriptions:
-
-    bind_request() connects a socket to a particular client driver.
-    It looks up the specified device ID in the list of registered
-    drivers, binds it to the socket, and tries to create an instance
-    of the device.  unbind_request() deletes a driver instance.
-
-    Bind_device() associates a device driver with a particular socket.
-    It is normally called by Driver Services after it has identified
-    a newly inserted card.  An instance of that driver will then be
-    eligible to register as a client of this socket.
-
-    Register_client() uses the dev_info_t handle to match the
-    caller with a socket.  The driver must have already been bound
-    to a socket with bind_device() -- in fact, bind_device()
-    allocates the client structure that will be used.
-
-======================================================================*/
-
-static int bind_request(struct pcmcia_socket *s, bind_info_t *bind_info)
-{
-	struct pcmcia_driver *p_drv;
-	struct pcmcia_device *p_dev;
-	int ret = 0;
-
-	s = pcmcia_get_socket(s);
-	if (!s)
-		return -EINVAL;
-
-	pr_debug("bind_request(%d, '%s')\n", s->sock,
-	       (char *)bind_info->dev_info);
-
-	p_drv = get_pcmcia_driver(&bind_info->dev_info);
-	if (!p_drv) {
-		ret = -EINVAL;
-		goto err_put;
-	}
-
-	if (!try_module_get(p_drv->owner)) {
-		ret = -EINVAL;
-		goto err_put_driver;
-	}
-
-	mutex_lock(&s->ops_mutex);
-	list_for_each_entry(p_dev, &s->devices_list, socket_device_list) {
-		if (p_dev->func == bind_info->function) {
-			if ((p_dev->dev.driver == &p_drv->drv)) {
-				if (p_dev->cardmgr) {
-					/* if there's already a device
-					 * registered, and it was registered
-					 * by userspace before, we need to
-					 * return the "instance". */
-					mutex_unlock(&s->ops_mutex);
-					bind_info->instance = p_dev;
-					ret = -EBUSY;
-					goto err_put_module;
-				} else {
-					/* the correct driver managed to bind
-					 * itself magically to the correct
-					 * device. */
-					mutex_unlock(&s->ops_mutex);
-					p_dev->cardmgr = p_drv;
-					ret = 0;
-					goto err_put_module;
-				}
-			} else if (!p_dev->dev.driver) {
-				/* there's already a device available where
-				 * no device has been bound to yet. So we don't
-				 * need to register a device! */
-				mutex_unlock(&s->ops_mutex);
-				goto rescan;
-			}
-		}
-	}
-	mutex_unlock(&s->ops_mutex);
-
-	p_dev = pcmcia_device_add(s, bind_info->function);
-	if (!p_dev) {
-		ret = -EIO;
-		goto err_put_module;
-	}
-
-rescan:
-	p_dev->cardmgr = p_drv;
-
-	/* if a driver is already running, we can abort */
-	if (p_dev->dev.driver)
-		goto err_put_module;
-
-	/*
-	 * Prevent this racing with a card insertion.
-	 */
-	mutex_lock(&s->skt_mutex);
-	ret = bus_rescan_devices(&pcmcia_bus_type);
-	mutex_unlock(&s->skt_mutex);
-	if (ret)
-		goto err_put_module;
-
-	/* check whether the driver indeed matched. I don't care if this
-	 * is racy or not, because it can only happen on cardmgr access
-	 * paths...
-	 */
-	if (!(p_dev->dev.driver == &p_drv->drv))
-		p_dev->cardmgr = NULL;
-
- err_put_module:
-	module_put(p_drv->owner);
- err_put_driver:
-	put_driver(&p_drv->drv);
- err_put:
-	pcmcia_put_socket(s);
-
-	return ret;
-} /* bind_request */
-
-#ifdef CONFIG_CARDBUS
-
-static struct pci_bus *pcmcia_lookup_bus(struct pcmcia_socket *s)
-{
-	if (!s || !(s->state & SOCKET_CARDBUS))
-		return NULL;
-
-	return s->cb_dev->subordinate;
-}
-#endif
-
-static int get_device_info(struct pcmcia_socket *s, bind_info_t *bind_info, int first)
-{
-	struct pcmcia_device *p_dev;
-	struct pcmcia_driver *p_drv;
-	int ret = 0;
-
-#ifdef CONFIG_CARDBUS
-	/*
-	 * Some unbelievably ugly code to associate the PCI cardbus
-	 * device and its driver with the PCMCIA "bind" information.
-	 */
-	{
-		struct pci_bus *bus;
-
-		bus = pcmcia_lookup_bus(s);
-		if (bus) {
-			struct list_head *list;
-			struct pci_dev *dev = NULL;
-
-			list = bus->devices.next;
-			while (list != &bus->devices) {
-				struct pci_dev *pdev = pci_dev_b(list);
-				list = list->next;
-
-				if (first) {
-					dev = pdev;
-					break;
-				}
-
-				/* Try to handle "next" here some way? */
-			}
-			if (dev && dev->driver) {
-				strlcpy(bind_info->name, dev->driver->name, DEV_NAME_LEN);
-				bind_info->major = 0;
-				bind_info->minor = 0;
-				bind_info->next = NULL;
-				return 0;
-			}
-		}
-	}
-#endif
-
-	mutex_lock(&s->ops_mutex);
-	list_for_each_entry(p_dev, &s->devices_list, socket_device_list) {
-		if (p_dev->func == bind_info->function) {
-			p_dev = pcmcia_get_dev(p_dev);
-			if (!p_dev)
-				continue;
-			goto found;
-		}
-	}
-	mutex_unlock(&s->ops_mutex);
-	return -ENODEV;
-
- found:
-	mutex_unlock(&s->ops_mutex);
-
-	p_drv = to_pcmcia_drv(p_dev->dev.driver);
-	if (p_drv && !p_dev->_locked) {
-		ret = -EAGAIN;
-		goto err_put;
-	}
-
-	if (!first) {
-		ret = -ENODEV;
-		goto err_put;
-	}
-
-	strlcpy(bind_info->name, dev_name(&p_dev->dev), DEV_NAME_LEN);
-	bind_info->next = NULL;
-
- err_put:
-	pcmcia_put_dev(p_dev);
-	return ret;
-} /* get_device_info */
-
-
-static int ds_open(struct inode *inode, struct file *file)
-{
-    socket_t i = iminor(inode);
-    struct pcmcia_socket *s;
-    user_info_t *user;
-    static int warning_printed;
-    int ret = 0;
-
-    pr_debug("ds_open(socket %d)\n", i);
-
-    lock_kernel();
-    s = pcmcia_get_socket_by_nr(i);
-    if (!s) {
-	    ret = -ENODEV;
-	    goto out;
-    }
-    s = pcmcia_get_socket(s);
-    if (!s) {
-	    ret = -ENODEV;
-	    goto out;
-    }
-
-    if ((file->f_flags & O_ACCMODE) != O_RDONLY) {
-	    if (s->pcmcia_state.busy) {
-		    pcmcia_put_socket(s);
-		    ret = -EBUSY;
-		    goto out;
-	    }
-	else
-	    s->pcmcia_state.busy = 1;
-    }
-
-    user = kmalloc(sizeof(user_info_t), GFP_KERNEL);
-    if (!user) {
-	    pcmcia_put_socket(s);
-	    ret = -ENOMEM;
-	    goto out;
-    }
-    user->event_tail = user->event_head = 0;
-    user->next = s->user;
-    user->user_magic = USER_MAGIC;
-    user->socket = s;
-    s->user = user;
-    file->private_data = user;
-
-    if (!warning_printed) {
-	    printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
-			"usage from process: %s.\n", current->comm);
-	    printk(KERN_INFO "pcmcia: This interface will soon be removed from "
-			"the kernel; please expect breakage unless you upgrade "
-			"to new tools.\n");
-	    printk(KERN_INFO "pcmcia: see http://www.kernel.org/pub/linux/"
-			"utils/kernel/pcmcia/pcmcia.html for details.\n");
-	    warning_printed = 1;
-    }
-
-    if (atomic_read(&s->present))
-	queue_event(user, CS_EVENT_CARD_INSERTION);
-out:
-    unlock_kernel();
-    return ret;
-} /* ds_open */
-
-/*====================================================================*/
-
-static int ds_release(struct inode *inode, struct file *file)
-{
-    struct pcmcia_socket *s;
-    user_info_t *user, **link;
-
-    pr_debug("ds_release(socket %d)\n", iminor(inode));
-
-    user = file->private_data;
-    if (CHECK_USER(user))
-	goto out;
-
-    s = user->socket;
-
-    /* Unlink user data structure */
-    if ((file->f_flags & O_ACCMODE) != O_RDONLY)
-	s->pcmcia_state.busy = 0;
-
-    file->private_data = NULL;
-    for (link = &s->user; *link; link = &(*link)->next)
-	if (*link == user)
-		break;
-    if (link == NULL)
-	goto out;
-    *link = user->next;
-    user->user_magic = 0;
-    kfree(user);
-    pcmcia_put_socket(s);
-out:
-    return 0;
-} /* ds_release */
-
-/*====================================================================*/
-
-static ssize_t ds_read(struct file *file, char __user *buf,
-		       size_t count, loff_t *ppos)
-{
-    struct pcmcia_socket *s;
-    user_info_t *user;
-    int ret;
-
-    pr_debug("ds_read(socket %d)\n", iminor(file->f_path.dentry->d_inode));
-
-    if (count < 4)
-	return -EINVAL;
-
-    user = file->private_data;
-    if (CHECK_USER(user))
-	return -EIO;
-
-    s = user->socket;
-    ret = wait_event_interruptible(s->queue, !queue_empty(user));
-    if (ret == 0)
-	ret = put_user(get_queued_event(user), (int __user *)buf) ? -EFAULT : 4;
-
-    return ret;
-} /* ds_read */
-
-/*====================================================================*/
-
-static ssize_t ds_write(struct file *file, const char __user *buf,
-			size_t count, loff_t *ppos)
-{
-    pr_debug("ds_write(socket %d)\n", iminor(file->f_path.dentry->d_inode));
-
-    if (count != 4)
-	return -EINVAL;
-    if ((file->f_flags & O_ACCMODE) == O_RDONLY)
-	return -EBADF;
-
-    return -EIO;
-} /* ds_write */
-
-/*====================================================================*/
-
-/* No kernel lock - fine */
-static u_int ds_poll(struct file *file, poll_table *wait)
-{
-    struct pcmcia_socket *s;
-    user_info_t *user;
-
-    pr_debug("ds_poll(socket %d)\n", iminor(file->f_path.dentry->d_inode));
-
-    user = file->private_data;
-    if (CHECK_USER(user))
-	return POLLERR;
-    s = user->socket;
-    /*
-     * We don't check for a dead socket here since that
-     * will send cardmgr into an endless spin.
-     */
-    poll_wait(file, &s->queue, wait);
-    if (!queue_empty(user))
-	return POLLIN | POLLRDNORM;
-    return 0;
-} /* ds_poll */
-
-/*====================================================================*/
-
-static int ds_ioctl(struct file *file, u_int cmd, u_long arg)
-{
-    struct pcmcia_socket *s;
-    void __user *uarg = (char __user *)arg;
-    u_int size;
-    int ret, err;
-    ds_ioctl_arg_t *buf;
-    user_info_t *user;
-
-    pr_debug("ds_ioctl(socket %d, %#x, %#lx)\n", iminor(inode), cmd, arg);
-
-    user = file->private_data;
-    if (CHECK_USER(user))
-	return -EIO;
-
-    s = user->socket;
-
-    size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
-    if (size > sizeof(ds_ioctl_arg_t))
-	return -EINVAL;
-
-    /* Permission check */
-    if (!(cmd & IOC_OUT) && !capable(CAP_SYS_ADMIN))
-	return -EPERM;
-
-    if (cmd & IOC_IN) {
-	if (!access_ok(VERIFY_READ, uarg, size)) {
-	    pr_debug("ds_ioctl(): verify_read = %d\n", -EFAULT);
-	    return -EFAULT;
-	}
-    }
-    if (cmd & IOC_OUT) {
-	if (!access_ok(VERIFY_WRITE, uarg, size)) {
-	    pr_debug("ds_ioctl(): verify_write = %d\n", -EFAULT);
-	    return -EFAULT;
-	}
-    }
-    buf = kmalloc(sizeof(ds_ioctl_arg_t), GFP_KERNEL);
-    if (!buf)
-	return -ENOMEM;
-
-    err = ret = 0;
-
-    if (cmd & IOC_IN) {
-	if (__copy_from_user((char *)buf, uarg, size)) {
-	    err = -EFAULT;
-	    goto free_out;
-	}
-    }
-
-    switch (cmd) {
-    case DS_ADJUST_RESOURCE_INFO:
-	ret = pcmcia_adjust_resource_info(&buf->adjust);
-	break;
-    case DS_GET_CONFIGURATION_INFO:
-	if (buf->config.Function &&
-	   (buf->config.Function >= s->functions))
-	    ret = -EINVAL;
-	else {
-	    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
-	    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
-	    pcmcia_put_dev(p_dev);
-	}
-	break;
-    case DS_GET_FIRST_TUPLE:
-	mutex_lock(&s->skt_mutex);
-	pcmcia_validate_mem(s);
-	mutex_unlock(&s->skt_mutex);
-	ret = pccard_get_first_tuple(s, BIND_FN_ALL, &buf->tuple);
-	break;
-    case DS_GET_NEXT_TUPLE:
-	ret = pccard_get_next_tuple(s, BIND_FN_ALL, &buf->tuple);
-	break;
-    case DS_GET_TUPLE_DATA:
-	buf->tuple.TupleData = buf->tuple_parse.data;
-	buf->tuple.TupleDataMax = sizeof(buf->tuple_parse.data);
-	ret = pccard_get_tuple_data(s, &buf->tuple);
-	break;
-    case DS_PARSE_TUPLE:
-	buf->tuple.TupleData = buf->tuple_parse.data;
-	ret = pcmcia_parse_tuple(&buf->tuple, &buf->tuple_parse.parse);
-	break;
-    case DS_RESET_CARD:
-	ret = pcmcia_reset_card(s);
-	break;
-    case DS_GET_STATUS:
-	    if (buf->status.Function &&
-		(buf->status.Function >= s->functions))
-		    ret = -EINVAL;
-	    else {
-		    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
-		    ret = pccard_get_status(s, p_dev, &buf->status);
-		    pcmcia_put_dev(p_dev);
-	    }
-	    break;
-    case DS_VALIDATE_CIS:
-	mutex_lock(&s->skt_mutex);
-	pcmcia_validate_mem(s);
-	mutex_unlock(&s->skt_mutex);
-	ret = pccard_validate_cis(s, &buf->cisinfo.Chains);
-	break;
-    case DS_SUSPEND_CARD:
-	pcmcia_parse_uevents(s, PCMCIA_UEVENT_SUSPEND);
-	break;
-    case DS_RESUME_CARD:
-	pcmcia_parse_uevents(s, PCMCIA_UEVENT_RESUME);
-	break;
-    case DS_EJECT_CARD:
-	pcmcia_parse_uevents(s, PCMCIA_UEVENT_EJECT);
-	break;
-    case DS_INSERT_CARD:
-	pcmcia_parse_uevents(s, PCMCIA_UEVENT_INSERT);
-	break;
-    case DS_ACCESS_CONFIGURATION_REGISTER:
-	if ((buf->conf_reg.Action == CS_WRITE) && !capable(CAP_SYS_ADMIN)) {
-	    err = -EPERM;
-	    goto free_out;
-	}
-
-	ret = -EINVAL;
-
-	if (!(buf->conf_reg.Function &&
-	     (buf->conf_reg.Function >= s->functions))) {
-		struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
-		if (p_dev) {
-			ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
-			pcmcia_put_dev(p_dev);
-		}
-	}
-	break;
-    case DS_GET_FIRST_REGION:
-    case DS_GET_NEXT_REGION:
-    case DS_BIND_MTD:
-	if (!capable(CAP_SYS_ADMIN)) {
-		err = -EPERM;
-		goto free_out;
-	} else {
-			printk_once(KERN_WARNING
-				"2.6. kernels use pcmciamtd instead of memory_cs.c and do not require special\n");
-			printk_once(KERN_WARNING "MTD handling any more.\n");
-	}
-	err = -EINVAL;
-	goto free_out;
-	break;
-    case DS_GET_FIRST_WINDOW:
-	ret = pcmcia_get_window(s, &buf->win_info.handle, 1,
-			&buf->win_info.window);
-	break;
-    case DS_GET_NEXT_WINDOW:
-	ret = pcmcia_get_window(s, &buf->win_info.handle,
-			buf->win_info.handle + 1, &buf->win_info.window);
-	break;
-    case DS_GET_MEM_PAGE:
-	ret = pcmcia_get_mem_page(s, buf->win_info.handle,
-			   &buf->win_info.map);
-	break;
-    case DS_REPLACE_CIS:
-	ret = pcmcia_replace_cis(s, buf->cisdump.Data, buf->cisdump.Length);
-	break;
-    case DS_BIND_REQUEST:
-	if (!capable(CAP_SYS_ADMIN)) {
-		err = -EPERM;
-		goto free_out;
-	}
-	err = bind_request(s, &buf->bind_info);
-	break;
-    case DS_GET_DEVICE_INFO:
-	err = get_device_info(s, &buf->bind_info, 1);
-	break;
-    case DS_GET_NEXT_DEVICE:
-	err = get_device_info(s, &buf->bind_info, 0);
-	break;
-    case DS_UNBIND_REQUEST:
-	err = 0;
-	break;
-    default:
-	err = -EINVAL;
-    }
-
-    if ((err == 0) && (ret != 0)) {
-	pr_debug("ds_ioctl: ret = %d\n", ret);
-	switch (ret) {
-	case -ENODEV:
-	case -EINVAL:
-	case -EBUSY:
-	case -ENOSYS:
-	    err = ret;
-	    break;
-	case -ENOMEM:
-	    err = -ENOSPC; break;
-	case -ENOSPC:
-	    err = -ENODATA; break;
-	default:
-	    err = -EIO; break;
-	}
-    }
-
-    if (cmd & IOC_OUT) {
-	if (__copy_to_user(uarg, (char *)buf, size))
-		err = -EFAULT;
-    }
-
-free_out:
-    kfree(buf);
-    return err;
-} /* ds_ioctl */
-
-static long ds_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	lock_kernel();
-	ret = ds_ioctl(file, cmd, arg);
-	unlock_kernel();
-
-	return ret;
-}
-
-
-/*====================================================================*/
-
-static const struct file_operations ds_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ds_open,
-	.release	= ds_release,
-	.unlocked_ioctl	= ds_unlocked_ioctl,
-	.read		= ds_read,
-	.write		= ds_write,
-	.poll		= ds_poll,
-};
-
-void __init pcmcia_setup_ioctl(void)
-{
-	int i;
-
-	/* Set up character device for user mode clients */
-	i = register_chrdev(0, "pcmcia", &ds_fops);
-	if (i < 0)
-		printk(KERN_NOTICE "unable to find a free device # for "
-		       "Driver Services (error=%d)\n", i);
-	else
-		major_dev = i;
-
-#ifdef CONFIG_PROC_FS
-	proc_pccard = proc_mkdir("bus/pccard", NULL);
-	if (proc_pccard)
-		proc_create("drivers", 0, proc_pccard, &pccard_drivers_proc_fops);
-#endif
-}
-
-
-void __exit pcmcia_cleanup_ioctl(void)
-{
-#ifdef CONFIG_PROC_FS
-	if (proc_pccard) {
-		remove_proc_entry("drivers", proc_pccard);
-		remove_proc_entry("bus/pccard", NULL);
-	}
-#endif
-	if (major_dev != -1)
-		unregister_chrdev(major_dev, "pcmcia");
-}
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index a4cd9adfcbc..54aa1c238cb 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -25,7 +25,6 @@
 
 #include <asm/irq.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -57,77 +56,107 @@ struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align,
 }
 
 
+static void release_io_space(struct pcmcia_socket *s, struct resource *res)
+{
+	resource_size_t num = resource_size(res);
+	int i;
+
+	dev_dbg(&s->dev, "release_io_space for %pR\n", res);
+
+	for (i = 0; i < MAX_IO_WIN; i++) {
+		if (!s->io[i].res)
+			continue;
+		if ((s->io[i].res->start <= res->start) &&
+		    (s->io[i].res->end >= res->end)) {
+			s->io[i].InUse -= num;
+			if (res->parent)
+				release_resource(res);
+			res->start = res->end = 0;
+			res->flags = IORESOURCE_IO;
+			/* Free the window if no one else is using it */
+			if (s->io[i].InUse == 0) {
+				release_resource(s->io[i].res);
+				kfree(s->io[i].res);
+				s->io[i].res = NULL;
+			}
+		}
+	}
+} /* release_io_space */
+
 /** alloc_io_space
  *
  * Special stuff for managing IO windows, because they are scarce
  */
-
-static int alloc_io_space(struct pcmcia_socket *s, u_int attr,
-			  unsigned int *base, unsigned int num, u_int lines)
+static int alloc_io_space(struct pcmcia_socket *s, struct resource *res,
+			unsigned int lines)
 {
 	unsigned int align;
+	unsigned int base = res->start;
+	unsigned int num = res->end;
+	int ret;
 
-	align = (*base) ? (lines ? 1<<lines : 0) : 1;
+	res->flags |= IORESOURCE_IO;
+
+	dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n",
+		res, lines);
+
+	align = base ? (lines ? 1<<lines : 0) : 1;
 	if (align && (align < num)) {
-		if (*base) {
-			dev_dbg(&s->dev, "odd IO request: num %#x align %#x\n",
-			       num, align);
+		if (base) {
+			dev_dbg(&s->dev, "odd IO request\n");
 			align = 0;
 		} else
 			while (align && (align < num))
 				align <<= 1;
 	}
-	if (*base & ~(align-1)) {
-		dev_dbg(&s->dev, "odd IO request: base %#x align %#x\n",
-		       *base, align);
+	if (base & ~(align-1)) {
+		dev_dbg(&s->dev, "odd IO request\n");
 		align = 0;
 	}
 
-	return s->resource_ops->find_io(s, attr, base, num, align);
-} /* alloc_io_space */
-
+	ret = s->resource_ops->find_io(s, res->flags, &base, num, align,
+				&res->parent);
+	if (ret) {
+		dev_dbg(&s->dev, "alloc_io_space request failed (%d)\n", ret);
+		return -EINVAL;
+	}
 
-static void release_io_space(struct pcmcia_socket *s, unsigned int base,
-			     unsigned int num)
-{
-	int i;
+	res->start = base;
+	res->end = res->start + num - 1;
 
-	for (i = 0; i < MAX_IO_WIN; i++) {
-		if (!s->io[i].res)
-			continue;
-		if ((s->io[i].res->start <= base) &&
-		    (s->io[i].res->end >= base+num-1)) {
-			s->io[i].InUse -= num;
-			/* Free the window if no one else is using it */
-			if (s->io[i].InUse == 0) {
-				release_resource(s->io[i].res);
-				kfree(s->io[i].res);
-				s->io[i].res = NULL;
-			}
+	if (res->parent) {
+		ret = request_resource(res->parent, res);
+		if (ret) {
+			dev_warn(&s->dev,
+				"request_resource %pR failed: %d\n", res, ret);
+			res->parent = NULL;
+			release_io_space(s, res);
 		}
 	}
-} /* release_io_space */
+	dev_dbg(&s->dev, "alloc_io_space request result %d: %pR\n", ret, res);
+	return ret;
+} /* alloc_io_space */
 
 
-/** pccard_access_configuration_register
+/**
+ * pcmcia_access_config() - read or write card configuration registers
  *
- * Access_configuration_register() reads and writes configuration
- * registers in attribute memory.  Memory window 0 is reserved for
- * this and the tuple reading services.
+ * pcmcia_access_config() reads and writes configuration registers in
+ * attribute memory.  Memory window 0 is reserved for this and the tuple
+ * reading services. Drivers must use pcmcia_read_config_byte() or
+ * pcmcia_write_config_byte().
  */
-
-int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
-					 conf_reg_t *reg)
+static int pcmcia_access_config(struct pcmcia_device *p_dev,
+				off_t where, u8 *val,
+				int (*accessf) (struct pcmcia_socket *s,
+						int attr, unsigned int addr,
+						unsigned int len, void *ptr))
 {
 	struct pcmcia_socket *s;
 	config_t *c;
 	int addr;
-	u_char val;
 	int ret = 0;
 
-	if (!p_dev || !p_dev->function_config)
-		return -EINVAL;
-
 	s = p_dev->socket;
 
 	mutex_lock(&s->ops_mutex);
@@ -139,44 +168,57 @@ int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
 		return -EACCES;
 	}
 
-	addr = (c->ConfigBase + reg->Offset) >> 1;
+	addr = (c->ConfigBase + where) >> 1;
+
+	ret = accessf(s, 1, addr, 1, val);
 
-	switch (reg->Action) {
-	case CS_READ:
-		ret = pcmcia_read_cis_mem(s, 1, addr, 1, &val);
-		reg->Value = val;
-		break;
-	case CS_WRITE:
-		val = reg->Value;
-		pcmcia_write_cis_mem(s, 1, addr, 1, &val);
-		break;
-	default:
-		dev_dbg(&s->dev, "Invalid conf register request\n");
-		ret = -EINVAL;
-		break;
-	}
 	mutex_unlock(&s->ops_mutex);
+
 	return ret;
-} /* pcmcia_access_configuration_register */
-EXPORT_SYMBOL(pcmcia_access_configuration_register);
+} /* pcmcia_access_config */
+
+
+/**
+ * pcmcia_read_config_byte() - read a byte from a card configuration register
+ *
+ * pcmcia_read_config_byte() reads a byte from a configuration register in
+ * attribute memory.
+ */
+int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val)
+{
+	return pcmcia_access_config(p_dev, where, val, pcmcia_read_cis_mem);
+}
+EXPORT_SYMBOL(pcmcia_read_config_byte);
+
+
+/**
+ * pcmcia_write_config_byte() - write a byte to a card configuration register
+ *
+ * pcmcia_write_config_byte() writes a byte to a configuration register in
+ * attribute memory.
+ */
+int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val)
+{
+	return pcmcia_access_config(p_dev, where, &val, pcmcia_write_cis_mem);
+}
+EXPORT_SYMBOL(pcmcia_write_config_byte);
 
 
 int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
-			memreq_t *req)
+			unsigned int offset)
 {
 	struct pcmcia_socket *s = p_dev->socket;
+	struct resource *res = wh;
+	unsigned int w;
 	int ret;
 
-	wh--;
-	if (wh >= MAX_WIN)
+	w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1;
+	if (w >= MAX_WIN)
 		return -EINVAL;
-	if (req->Page != 0) {
-		dev_dbg(&s->dev, "failure: requested page is zero\n");
-		return -EINVAL;
-	}
+
 	mutex_lock(&s->ops_mutex);
-	s->win[wh].card_start = req->CardOffset;
-	ret = s->ops->set_mem_map(s, &s->win[wh]);
+	s->win[w].card_start = offset;
+	ret = s->ops->set_mem_map(s, &s->win[w]);
 	if (ret)
 		dev_warn(&s->dev, "failed to set_mem_map\n");
 	mutex_unlock(&s->ops_mutex);
@@ -316,31 +358,25 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev)
  * don't bother checking the port ranges against the current socket
  * values.
  */
-static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req)
+static int pcmcia_release_io(struct pcmcia_device *p_dev)
 {
 	struct pcmcia_socket *s = p_dev->socket;
 	int ret = -EINVAL;
 	config_t *c;
 
 	mutex_lock(&s->ops_mutex);
-	c = p_dev->function_config;
-
 	if (!p_dev->_io)
 		goto out;
 
-	p_dev->_io = 0;
+	c = p_dev->function_config;
 
-	if ((c->io.BasePort1 != req->BasePort1) ||
-	    (c->io.NumPorts1 != req->NumPorts1) ||
-	    (c->io.BasePort2 != req->BasePort2) ||
-	    (c->io.NumPorts2 != req->NumPorts2))
-		goto out;
+	release_io_space(s, &c->io[0]);
 
-	c->state &= ~CONFIG_IO_REQ;
+	if (c->io[1].end)
+		release_io_space(s, &c->io[1]);
 
-	release_io_space(s, req->BasePort1, req->NumPorts1);
-	if (req->NumPorts2)
-		release_io_space(s, req->BasePort2, req->NumPorts2);
+	p_dev->_io = 0;
+	c->state &= ~CONFIG_IO_REQ;
 
 out:
 	mutex_unlock(&s->ops_mutex);
@@ -349,19 +385,22 @@ out:
 } /* pcmcia_release_io */
 
 
-int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
+int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
 {
 	struct pcmcia_socket *s = p_dev->socket;
 	pccard_mem_map *win;
+	unsigned int w;
+
+	dev_dbg(&p_dev->dev, "releasing window %pR\n", res);
 
-	wh--;
-	if (wh >= MAX_WIN)
+	w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1;
+	if (w >= MAX_WIN)
 		return -EINVAL;
 
 	mutex_lock(&s->ops_mutex);
-	win = &s->win[wh];
+	win = &s->win[w];
 
-	if (!(p_dev->_win & CLIENT_WIN_REQ(wh))) {
+	if (!(p_dev->_win & CLIENT_WIN_REQ(w))) {
 		dev_dbg(&s->dev, "not releasing unknown window\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EINVAL;
@@ -370,15 +409,16 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
 	/* Shut down memory window */
 	win->flags &= ~MAP_ACTIVE;
 	s->ops->set_mem_map(s, win);
-	s->state &= ~SOCKET_WIN_REQ(wh);
+	s->state &= ~SOCKET_WIN_REQ(w);
 
 	/* Release system memory */
 	if (win->res) {
+		release_resource(res);
 		release_resource(win->res);
 		kfree(win->res);
 		win->res = NULL;
 	}
-	p_dev->_win &= ~CLIENT_WIN_REQ(wh);
+	p_dev->_win &= ~CLIENT_WIN_REQ(w);
 	mutex_unlock(&s->ops_mutex);
 
 	return 0;
@@ -473,13 +513,13 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus);
 	}
 	if (req->Present & PRESENT_IOBASE_0) {
-		u_char b = c->io.BasePort1 & 0xff;
+		u8 b = c->io[0].start & 0xff;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b);
-		b = (c->io.BasePort1 >> 8) & 0xff;
+		b = (c->io[0].start >> 8) & 0xff;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b);
 	}
 	if (req->Present & PRESENT_IOSIZE) {
-		u_char b = c->io.NumPorts1 + c->io.NumPorts2 - 1;
+		u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1;
 		pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b);
 	}
 
@@ -513,28 +553,29 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 EXPORT_SYMBOL(pcmcia_request_configuration);
 
 
-/** pcmcia_request_io
+/**
+ * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices
  *
- * Request_io() reserves ranges of port addresses for a socket.
- * I have not implemented range sharing or alias addressing.
+ * pcmcia_request_io() attepts to reserve the IO port ranges specified in
+ * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The
+ * "start" value is the requested start of the IO port resource; "end"
+ * reflects the number of ports requested. The number of IO lines requested
+ * is specified in &struct pcmcia_device @p_dev->io_lines.
  */
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
+int pcmcia_request_io(struct pcmcia_device *p_dev)
 {
 	struct pcmcia_socket *s = p_dev->socket;
-	config_t *c;
+	config_t *c = p_dev->function_config;
 	int ret = -EINVAL;
 
 	mutex_lock(&s->ops_mutex);
+	dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
 
 	if (!(s->state & SOCKET_PRESENT)) {
-		dev_dbg(&s->dev, "No card present\n");
+		dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
 		goto out;
 	}
 
-	if (!req)
-		goto out;
-
-	c = p_dev->function_config;
 	if (c->state & CONFIG_LOCKED) {
 		dev_dbg(&s->dev, "Configuration is locked\n");
 		goto out;
@@ -543,40 +584,25 @@ int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req)
 		dev_dbg(&s->dev, "IO already configured\n");
 		goto out;
 	}
-	if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) {
-		dev_dbg(&s->dev, "bad attribute setting for IO region 1\n");
-		goto out;
-	}
-	if ((req->NumPorts2 > 0) &&
-	    (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) {
-		dev_dbg(&s->dev, "bad attribute setting for IO region 2\n");
-		goto out;
-	}
 
-	dev_dbg(&s->dev, "trying to allocate resource 1\n");
-	ret = alloc_io_space(s, req->Attributes1, &req->BasePort1,
-			     req->NumPorts1, req->IOAddrLines);
-	if (ret) {
-		dev_dbg(&s->dev, "allocation of resource 1 failed\n");
+	ret = alloc_io_space(s, &c->io[0], p_dev->io_lines);
+	if (ret)
 		goto out;
-	}
 
-	if (req->NumPorts2) {
-		dev_dbg(&s->dev, "trying to allocate resource 2\n");
-		ret = alloc_io_space(s, req->Attributes2, &req->BasePort2,
-				     req->NumPorts2, req->IOAddrLines);
+	if (c->io[1].end) {
+		ret = alloc_io_space(s, &c->io[1], p_dev->io_lines);
 		if (ret) {
-			dev_dbg(&s->dev, "allocation of resource 2 failed\n");
-			release_io_space(s, req->BasePort1, req->NumPorts1);
+			release_io_space(s, &c->io[0]);
 			goto out;
 		}
-	}
+	} else
+		c->io[1].start = 0;
 
-	c->io = *req;
 	c->state |= CONFIG_IO_REQ;
 	p_dev->_io = 1;
-	dev_dbg(&s->dev, "allocating resources succeeded: %d\n", ret);
 
+	dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
+		&c->io[0], &c->io[1]);
 out:
 	mutex_unlock(&s->ops_mutex);
 
@@ -651,7 +677,7 @@ EXPORT_SYMBOL(__pcmcia_request_exclusive_irq);
 #ifdef CONFIG_PCMCIA_PROBE
 
 /* mask of IRQs already reserved by other cards, we should avoid using them */
-static u8 pcmcia_used_irq[NR_IRQS];
+static u8 pcmcia_used_irq[32];
 
 static irqreturn_t test_action(int cpl, void *dev_id)
 {
@@ -674,6 +700,9 @@ static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type)
 	for (try = 0; try < 64; try++) {
 		irq = try % 32;
 
+		if (irq > NR_IRQS)
+			continue;
+
 		/* marked as available by driver, not blocked by userspace? */
 		if (!((mask >> irq) & 1))
 			continue;
@@ -767,23 +796,18 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	struct pcmcia_socket *s = p_dev->socket;
 	pccard_mem_map *win;
 	u_long align;
+	struct resource *res;
 	int w;
 
 	if (!(s->state & SOCKET_PRESENT)) {
 		dev_dbg(&s->dev, "No card present\n");
 		return -ENODEV;
 	}
-	if (req->Attributes & (WIN_PAGED | WIN_SHARED)) {
-		dev_dbg(&s->dev, "bad attribute setting for iomem region\n");
-		return -EINVAL;
-	}
 
 	/* Window size defaults to smallest available */
 	if (req->Size == 0)
 		req->Size = s->map_size;
-	align = (((s->features & SS_CAP_MEM_ALIGN) ||
-		  (req->Attributes & WIN_STRICT_ALIGN)) ?
-		 req->Size : s->map_size);
+	align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
 	if (req->Size & (s->map_size-1)) {
 		dev_dbg(&s->dev, "invalid map size\n");
 		return -EINVAL;
@@ -797,20 +821,21 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 		align = 0;
 
 	/* Allocate system memory window */
+	mutex_lock(&s->ops_mutex);
 	for (w = 0; w < MAX_WIN; w++)
 		if (!(s->state & SOCKET_WIN_REQ(w)))
 			break;
 	if (w == MAX_WIN) {
 		dev_dbg(&s->dev, "all windows are used already\n");
+		mutex_unlock(&s->ops_mutex);
 		return -EINVAL;
 	}
 
-	mutex_lock(&s->ops_mutex);
 	win = &s->win[w];
 
 	if (!(s->features & SS_CAP_STATIC_MAP)) {
 		win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
-						      (req->Attributes & WIN_MAP_BELOW_1MB), s);
+						0, s);
 		if (!win->res) {
 			dev_dbg(&s->dev, "allocating mem region failed\n");
 			mutex_unlock(&s->ops_mutex);
@@ -821,16 +846,8 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 
 	/* Configure the socket controller */
 	win->map = w+1;
-	win->flags = 0;
+	win->flags = req->Attributes;
 	win->speed = req->AccessSpeed;
-	if (req->Attributes & WIN_MEMORY_TYPE)
-		win->flags |= MAP_ATTRIB;
-	if (req->Attributes & WIN_ENABLE)
-		win->flags |= MAP_ACTIVE;
-	if (req->Attributes & WIN_DATA_WIDTH_16)
-		win->flags |= MAP_16BIT;
-	if (req->Attributes & WIN_USE_WAIT)
-		win->flags |= MAP_USE_WAIT;
 	win->card_start = 0;
 
 	if (s->ops->set_mem_map(s, win) != 0) {
@@ -846,8 +863,21 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	else
 		req->Base = win->res->start;
 
+	/* convert to new-style resources */
+	res = p_dev->resource[w + MAX_IO_WIN];
+	res->start = req->Base;
+	res->end = req->Base + req->Size - 1;
+	res->flags &= ~IORESOURCE_BITS;
+	res->flags |= (req->Attributes & WIN_FLAGS_MAP) | (win->map << 2);
+	res->flags |= IORESOURCE_MEM;
+	res->parent = win->res;
+	if (win->res)
+		request_resource(&iomem_resource, res);
+
+	dev_dbg(&s->dev, "request_window results in %pR\n", res);
+
 	mutex_unlock(&s->ops_mutex);
-	*wh = w + 1;
+	*wh = res;
 
 	return 0;
 } /* pcmcia_request_window */
@@ -855,13 +885,18 @@ EXPORT_SYMBOL(pcmcia_request_window);
 
 void pcmcia_disable_device(struct pcmcia_device *p_dev)
 {
+	int i;
+	for (i = 0; i < MAX_WIN; i++) {
+		struct resource *res = p_dev->resource[MAX_IO_WIN + i];
+		if (res->flags & WIN_FLAGS_REQ)
+			pcmcia_release_window(p_dev, res);
+	}
+
 	pcmcia_release_configuration(p_dev);
-	pcmcia_release_io(p_dev, &p_dev->io);
+	pcmcia_release_io(p_dev);
 	if (p_dev->_irq) {
 		free_irq(p_dev->irq, p_dev->priv);
 		p_dev->_irq = 0;
 	}
-	if (p_dev->win)
-		pcmcia_release_window(p_dev, p_dev->win);
 }
 EXPORT_SYMBOL(pcmcia_disable_device);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index b61a13663a0..b8a869af0f4 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -17,7 +17,6 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index f370476d541..ae07b4db8a6 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -32,7 +32,6 @@
 #include <mach/pxa2xx-regs.h>
 #include <asm/mach-types.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
 
diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c
index d0bf3502106..8510c35d295 100644
--- a/drivers/pcmcia/rsrc_iodyn.c
+++ b/drivers/pcmcia/rsrc_iodyn.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -88,7 +87,7 @@ static struct resource *__iodyn_find_io_region(struct pcmcia_socket *s,
 
 static int iodyn_find_io(struct pcmcia_socket *s, unsigned int attr,
 			unsigned int *base, unsigned int num,
-			unsigned int align)
+			unsigned int align, struct resource **parent)
 {
 	int i, ret = 0;
 
@@ -129,6 +128,7 @@ static int iodyn_find_io(struct pcmcia_socket *s, unsigned int attr,
 				((res->flags & ~IORESOURCE_BITS) |
 					(attr & IORESOURCE_BITS));
 			s->io[i].InUse = num;
+			*parent = res;
 			return 0;
 		}
 
@@ -140,6 +140,7 @@ static int iodyn_find_io(struct pcmcia_socket *s, unsigned int attr,
 				continue;
 			*base = try;
 			s->io[i].InUse += num;
+			*parent = res;
 			return 0;
 		}
 
@@ -152,6 +153,7 @@ static int iodyn_find_io(struct pcmcia_socket *s, unsigned int attr,
 				continue;
 			*base = try;
 			s->io[i].InUse += num;
+			*parent = res;
 			return 0;
 		}
 	}
@@ -164,8 +166,6 @@ struct pccard_resource_ops pccard_iodyn_ops = {
 	.validate_mem = NULL,
 	.find_io = iodyn_find_io,
 	.find_mem = NULL,
-	.add_io = NULL,
-	.add_mem = NULL,
 	.init = static_init,
 	.exit = NULL,
 };
diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c
index 142efac3c38..4e80421fd90 100644
--- a/drivers/pcmcia/rsrc_mgr.c
+++ b/drivers/pcmcia/rsrc_mgr.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -48,11 +47,12 @@ struct resource *pcmcia_make_resource(unsigned long start, unsigned long end,
 
 static int static_find_io(struct pcmcia_socket *s, unsigned int attr,
 			unsigned int *base, unsigned int num,
-			unsigned int align)
+			unsigned int align, struct resource **parent)
 {
 	if (!s->io_offset)
 		return -EINVAL;
 	*base = s->io_offset | (*base & 0x0fff);
+	*parent = NULL;
 
 	return 0;
 }
@@ -62,8 +62,6 @@ struct pccard_resource_ops pccard_static_ops = {
 	.validate_mem = NULL,
 	.find_io = static_find_io,
 	.find_mem = NULL,
-	.add_io = NULL,
-	.add_mem = NULL,
 	.init = static_init,
 	.exit = NULL,
 };
diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c
index dcd1a4ad3d6..96f348b35fd 100644
--- a/drivers/pcmcia/rsrc_nonstatic.c
+++ b/drivers/pcmcia/rsrc_nonstatic.c
@@ -28,7 +28,6 @@
 
 #include <asm/irq.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -64,6 +63,9 @@ struct socket_data {
 #define MEM_PROBE_LOW	(1 << 0)
 #define MEM_PROBE_HIGH	(1 << 1)
 
+/* Action field */
+#define REMOVE_MANAGED_RESOURCE		1
+#define ADD_MANAGED_RESOURCE		2
 
 /*======================================================================
 
@@ -716,7 +718,7 @@ static struct resource *__nonstatic_find_io_region(struct pcmcia_socket *s,
 
 static int nonstatic_find_io(struct pcmcia_socket *s, unsigned int attr,
 			unsigned int *base, unsigned int num,
-			unsigned int align)
+			unsigned int align, struct resource **parent)
 {
 	int i, ret = 0;
 
@@ -758,6 +760,7 @@ static int nonstatic_find_io(struct pcmcia_socket *s, unsigned int attr,
 				((res->flags & ~IORESOURCE_BITS) |
 					(attr & IORESOURCE_BITS));
 			s->io[i].InUse = num;
+			*parent = res;
 			return 0;
 		}
 
@@ -773,6 +776,7 @@ static int nonstatic_find_io(struct pcmcia_socket *s, unsigned int attr,
 					continue;
 				*base = try;
 				s->io[i].InUse += num;
+				*parent = res;
 				return 0;
 			}
 		}
@@ -791,6 +795,7 @@ static int nonstatic_find_io(struct pcmcia_socket *s, unsigned int attr,
 					continue;
 				*base = try;
 				s->io[i].InUse += num;
+				*parent = res;
 				return 0;
 			}
 		}
@@ -1055,8 +1060,6 @@ struct pccard_resource_ops pccard_nonstatic_ops = {
 	.validate_mem = pcmcia_nonstatic_validate_mem,
 	.find_io = nonstatic_find_io,
 	.find_mem = nonstatic_find_mem_region,
-	.add_io = adjust_io,
-	.add_mem = adjust_memory,
 	.init = nonstatic_init,
 	.exit = nonstatic_release_resource_db,
 };
@@ -1115,8 +1118,6 @@ static ssize_t store_io_db(struct device *dev,
 
 	mutex_lock(&s->ops_mutex);
 	ret = adjust_io(s, add, start_addr, end_addr);
-	if (!ret)
-		s->resource_setup_new = 1;
 	mutex_unlock(&s->ops_mutex);
 
 	return ret ? ret : count;
@@ -1183,8 +1184,6 @@ static ssize_t store_mem_db(struct device *dev,
 
 	mutex_lock(&s->ops_mutex);
 	ret = adjust_memory(s, add, start_addr, end_addr);
-	if (!ret)
-		s->resource_setup_new = 1;
 	mutex_unlock(&s->ops_mutex);
 
 	return ret ? ret : count;
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index edbd8c47262..e0985148029 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -35,7 +35,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index e40824ce6b0..3fba3a67912 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -11,7 +11,6 @@
 
 /* include the world */
 #include <linux/cpufreq.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index 80e36bc407d..cb0d3ace18b 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -26,7 +26,6 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 56004a1b5bb..be0d841c7eb 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -49,7 +49,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include "tcic.h"
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
index 201ccfa1e97..fa88c360c37 100644
--- a/drivers/pcmcia/xxs1500_ss.c
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index f1d41374eea..414d9a6f9a3 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -19,7 +19,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
 
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 8e9ba177d81..1e5506be39b 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -142,4 +142,15 @@ config CHARGER_PCF50633
 	help
 	 Say Y to include support for NXP PCF50633 Main Battery Charger.
 
+config BATTERY_JZ4740
+	tristate "Ingenic JZ4740 battery"
+	depends on MACH_JZ4740
+	depends on MFD_JZ4740_ADC
+	help
+	  Say Y to enable support for the battery on Ingenic JZ4740 based
+	  boards.
+
+	  This driver can be build as a module. If so, the module will be
+	  called jz4740-battery.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 00050809a6c..cf95009d9bc 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -34,3 +34,4 @@ obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
+obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
diff --git a/drivers/power/jz4740-battery.c b/drivers/power/jz4740-battery.c
new file mode 100644
index 00000000000..20c4b952e9b
--- /dev/null
+++ b/drivers/power/jz4740-battery.c
@@ -0,0 +1,445 @@
+/*
+ * Battery measurement code for Ingenic JZ SOC.
+ *
+ * Copyright (C) 2009 Jiejing Zhang <kzjeef@gmail.com>
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/power_supply.h>
+
+#include <linux/power/jz4740-battery.h>
+#include <linux/jz4740-adc.h>
+
+struct jz_battery {
+	struct jz_battery_platform_data *pdata;
+	struct platform_device *pdev;
+
+	struct resource *mem;
+	void __iomem *base;
+
+	int irq;
+	int charge_irq;
+
+	struct mfd_cell *cell;
+
+	int status;
+	long voltage;
+
+	struct completion read_completion;
+
+	struct power_supply battery;
+	struct delayed_work work;
+};
+
+static inline struct jz_battery *psy_to_jz_battery(struct power_supply *psy)
+{
+	return container_of(psy, struct jz_battery, battery);
+}
+
+static irqreturn_t jz_battery_irq_handler(int irq, void *devid)
+{
+	struct jz_battery *battery = devid;
+
+	complete(&battery->read_completion);
+	return IRQ_HANDLED;
+}
+
+static long jz_battery_read_voltage(struct jz_battery *battery)
+{
+	unsigned long t;
+	unsigned long val;
+	long voltage;
+
+	INIT_COMPLETION(battery->read_completion);
+
+	enable_irq(battery->irq);
+	battery->cell->enable(battery->pdev);
+
+	t = wait_for_completion_interruptible_timeout(&battery->read_completion,
+		HZ);
+
+	if (t > 0) {
+		val = readw(battery->base) & 0xfff;
+
+		if (battery->pdata->info.voltage_max_design <= 2500000)
+			val = (val * 78125UL) >> 7UL;
+		else
+			val = ((val * 924375UL) >> 9UL) + 33000;
+		voltage = (long)val;
+	} else {
+		voltage = t ? t : -ETIMEDOUT;
+	}
+
+	battery->cell->disable(battery->pdev);
+	disable_irq(battery->irq);
+
+	return voltage;
+}
+
+static int jz_battery_get_capacity(struct power_supply *psy)
+{
+	struct jz_battery *jz_battery = psy_to_jz_battery(psy);
+	struct power_supply_info *info = &jz_battery->pdata->info;
+	long voltage;
+	int ret;
+	int voltage_span;
+
+	voltage = jz_battery_read_voltage(jz_battery);
+
+	if (voltage < 0)
+		return voltage;
+
+	voltage_span = info->voltage_max_design - info->voltage_min_design;
+	ret = ((voltage - info->voltage_min_design) * 100) / voltage_span;
+
+	if (ret > 100)
+		ret = 100;
+	else if (ret < 0)
+		ret = 0;
+
+	return ret;
+}
+
+static int jz_battery_get_property(struct power_supply *psy,
+	enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct jz_battery *jz_battery = psy_to_jz_battery(psy);
+	struct power_supply_info *info = &jz_battery->pdata->info;
+	long voltage;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = jz_battery->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = jz_battery->pdata->info.technology;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		voltage = jz_battery_read_voltage(jz_battery);
+		if (voltage < info->voltage_min_design)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = jz_battery_get_capacity(psy);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = jz_battery_read_voltage(jz_battery);
+		if (val->intval < 0)
+			return val->intval;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = info->voltage_max_design;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = info->voltage_min_design;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void jz_battery_external_power_changed(struct power_supply *psy)
+{
+	struct jz_battery *jz_battery = psy_to_jz_battery(psy);
+
+	cancel_delayed_work(&jz_battery->work);
+	schedule_delayed_work(&jz_battery->work, 0);
+}
+
+static irqreturn_t jz_battery_charge_irq(int irq, void *data)
+{
+	struct jz_battery *jz_battery = data;
+
+	cancel_delayed_work(&jz_battery->work);
+	schedule_delayed_work(&jz_battery->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void jz_battery_update(struct jz_battery *jz_battery)
+{
+	int status;
+	long voltage;
+	bool has_changed = false;
+	int is_charging;
+
+	if (gpio_is_valid(jz_battery->pdata->gpio_charge)) {
+		is_charging = gpio_get_value(jz_battery->pdata->gpio_charge);
+		is_charging ^= jz_battery->pdata->gpio_charge_active_low;
+		if (is_charging)
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+		if (status != jz_battery->status) {
+			jz_battery->status = status;
+			has_changed = true;
+		}
+	}
+
+	voltage = jz_battery_read_voltage(jz_battery);
+	if (abs(voltage - jz_battery->voltage) < 50000) {
+		jz_battery->voltage = voltage;
+		has_changed = true;
+	}
+
+	if (has_changed)
+		power_supply_changed(&jz_battery->battery);
+}
+
+static enum power_supply_property jz_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static void jz_battery_work(struct work_struct *work)
+{
+	/* Too small interval will increase system workload */
+	const int interval = HZ * 30;
+	struct jz_battery *jz_battery = container_of(work, struct jz_battery,
+					    work.work);
+
+	jz_battery_update(jz_battery);
+	schedule_delayed_work(&jz_battery->work, interval);
+}
+
+static int __devinit jz_battery_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct jz_battery_platform_data *pdata = pdev->dev.parent->platform_data;
+	struct jz_battery *jz_battery;
+	struct power_supply *battery;
+
+	jz_battery = kzalloc(sizeof(*jz_battery), GFP_KERNEL);
+	if (!jz_battery) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	jz_battery->cell = pdev->dev.platform_data;
+
+	jz_battery->irq = platform_get_irq(pdev, 0);
+	if (jz_battery->irq < 0) {
+		ret = jz_battery->irq;
+		dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+		goto err_free;
+	}
+
+	jz_battery->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!jz_battery->mem) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform mmio resource\n");
+		goto err_free;
+	}
+
+	jz_battery->mem = request_mem_region(jz_battery->mem->start,
+				resource_size(jz_battery->mem),	pdev->name);
+	if (!jz_battery->mem) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+		goto err_free;
+	}
+
+	jz_battery->base = ioremap_nocache(jz_battery->mem->start,
+				resource_size(jz_battery->mem));
+	if (!jz_battery->base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+		goto err_release_mem_region;
+	}
+
+	battery = &jz_battery->battery;
+	battery->name = pdata->info.name;
+	battery->type = POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties	= jz_battery_properties;
+	battery->num_properties	= ARRAY_SIZE(jz_battery_properties);
+	battery->get_property = jz_battery_get_property;
+	battery->external_power_changed = jz_battery_external_power_changed;
+	battery->use_for_apm = 1;
+
+	jz_battery->pdata = pdata;
+	jz_battery->pdev = pdev;
+
+	init_completion(&jz_battery->read_completion);
+
+	INIT_DELAYED_WORK(&jz_battery->work, jz_battery_work);
+
+	ret = request_irq(jz_battery->irq, jz_battery_irq_handler, 0, pdev->name,
+			jz_battery);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %d\n", ret);
+		goto err_iounmap;
+	}
+	disable_irq(jz_battery->irq);
+
+	if (gpio_is_valid(pdata->gpio_charge)) {
+		ret = gpio_request(pdata->gpio_charge, dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "charger state gpio request failed.\n");
+			goto err_free_irq;
+		}
+		ret = gpio_direction_input(pdata->gpio_charge);
+		if (ret) {
+			dev_err(&pdev->dev, "charger state gpio set direction failed.\n");
+			goto err_free_gpio;
+		}
+
+		jz_battery->charge_irq = gpio_to_irq(pdata->gpio_charge);
+
+		if (jz_battery->charge_irq >= 0) {
+			ret = request_irq(jz_battery->charge_irq,
+				    jz_battery_charge_irq,
+				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				    dev_name(&pdev->dev), jz_battery);
+			if (ret) {
+				dev_err(&pdev->dev, "Failed to request charge irq: %d\n", ret);
+				goto err_free_gpio;
+			}
+		}
+	} else {
+		jz_battery->charge_irq = -1;
+	}
+
+	if (jz_battery->pdata->info.voltage_max_design <= 2500000)
+		jz4740_adc_set_config(pdev->dev.parent, JZ_ADC_CONFIG_BAT_MB,
+			JZ_ADC_CONFIG_BAT_MB);
+	else
+		jz4740_adc_set_config(pdev->dev.parent, JZ_ADC_CONFIG_BAT_MB, 0);
+
+	ret = power_supply_register(&pdev->dev, &jz_battery->battery);
+	if (ret) {
+		dev_err(&pdev->dev, "power supply battery register failed.\n");
+		goto err_free_charge_irq;
+	}
+
+	platform_set_drvdata(pdev, jz_battery);
+	schedule_delayed_work(&jz_battery->work, 0);
+
+	return 0;
+
+err_free_charge_irq:
+	if (jz_battery->charge_irq >= 0)
+		free_irq(jz_battery->charge_irq, jz_battery);
+err_free_gpio:
+	if (gpio_is_valid(pdata->gpio_charge))
+		gpio_free(jz_battery->pdata->gpio_charge);
+err_free_irq:
+	free_irq(jz_battery->irq, jz_battery);
+err_iounmap:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(jz_battery->base);
+err_release_mem_region:
+	release_mem_region(jz_battery->mem->start, resource_size(jz_battery->mem));
+err_free:
+	kfree(jz_battery);
+	return ret;
+}
+
+static int __devexit jz_battery_remove(struct platform_device *pdev)
+{
+	struct jz_battery *jz_battery = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&jz_battery->work);
+
+	if (gpio_is_valid(jz_battery->pdata->gpio_charge)) {
+		if (jz_battery->charge_irq >= 0)
+			free_irq(jz_battery->charge_irq, jz_battery);
+		gpio_free(jz_battery->pdata->gpio_charge);
+	}
+
+	power_supply_unregister(&jz_battery->battery);
+
+	free_irq(jz_battery->irq, jz_battery);
+
+	iounmap(jz_battery->base);
+	release_mem_region(jz_battery->mem->start, resource_size(jz_battery->mem));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int jz_battery_suspend(struct device *dev)
+{
+	struct jz_battery *jz_battery = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&jz_battery->work);
+	jz_battery->status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	return 0;
+}
+
+static int jz_battery_resume(struct device *dev)
+{
+	struct jz_battery *jz_battery = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&jz_battery->work, 0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops jz_battery_pm_ops = {
+	.suspend	= jz_battery_suspend,
+	.resume		= jz_battery_resume,
+};
+
+#define JZ_BATTERY_PM_OPS (&jz_battery_pm_ops)
+#else
+#define JZ_BATTERY_PM_OPS NULL
+#endif
+
+static struct platform_driver jz_battery_driver = {
+	.probe		= jz_battery_probe,
+	.remove		= __devexit_p(jz_battery_remove),
+	.driver = {
+		.name = "jz4740-battery",
+		.owner = THIS_MODULE,
+		.pm = JZ_BATTERY_PM_OPS,
+	},
+};
+
+static int __init jz_battery_init(void)
+{
+	return platform_driver_register(&jz_battery_driver);
+}
+module_init(jz_battery_init);
+
+static void __exit jz_battery_exit(void)
+{
+	platform_driver_unregister(&jz_battery_driver);
+}
+module_exit(jz_battery_exit);
+
+MODULE_ALIAS("platform:jz4740-battery");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("JZ4740 SoC battery driver");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 2248087b9be..422a709d271 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1025,7 +1025,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 		if (regulator->dev_attr.attr.name == NULL)
 			goto attr_name_err;
 
-		regulator->dev_attr.attr.owner = THIS_MODULE;
 		regulator->dev_attr.attr.mode = 0444;
 		regulator->dev_attr.show = device_requested_uA_show;
 		err = device_create_file(dev, &regulator->dev_attr);
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 10ba12c8c5e..4301a6c7ed3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -774,7 +774,7 @@ config RTC_DRV_AT91SAM9_GPBR
 
 config RTC_DRV_AU1XXX
 	tristate "Au1xxx Counter0 RTC support"
-	depends on SOC_AU1X00
+	depends on MIPS_ALCHEMY
 	help
 	  This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
 	  counter) to be used as a RTC.
@@ -905,4 +905,15 @@ config RTC_DRV_MPC5121
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-mpc5121.
 
+config RTC_DRV_JZ4740
+	tristate "Ingenic JZ4740 SoC"
+	depends on RTC_CLASS
+	depends on MACH_JZ4740
+	help
+	  If you say yes here you get support for the Ingenic JZ4740 SoC RTC
+	  controller.
+
+	  This driver can also be buillt as a module. If so, the module
+	  will be called rtc-jz4740.
+
 endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 5adbba7cf89..fedf9bb3659 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_RTC_DRV_EP93XX)	+= rtc-ep93xx.o
 obj-$(CONFIG_RTC_DRV_FM3130)	+= rtc-fm3130.o
 obj-$(CONFIG_RTC_DRV_GENERIC)	+= rtc-generic.o
 obj-$(CONFIG_RTC_DRV_ISL1208)	+= rtc-isl1208.o
+obj-$(CONFIG_RTC_DRV_JZ4740)	+= rtc-jz4740.o
 obj-$(CONFIG_RTC_DRV_M41T80)	+= rtc-m41t80.o
 obj-$(CONFIG_RTC_DRV_M41T94)	+= rtc-m41t94.o
 obj-$(CONFIG_RTC_DRV_M48T35)	+= rtc-m48t35.o
diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
new file mode 100644
index 00000000000..2619d57b91d
--- /dev/null
+++ b/drivers/rtc/rtc-jz4740.c
@@ -0,0 +1,345 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *	 JZ4740 SoC RTC driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of  the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define JZ_REG_RTC_CTRL		0x00
+#define JZ_REG_RTC_SEC		0x04
+#define JZ_REG_RTC_SEC_ALARM	0x08
+#define JZ_REG_RTC_REGULATOR	0x0C
+#define JZ_REG_RTC_HIBERNATE	0x20
+#define JZ_REG_RTC_SCRATCHPAD	0x34
+
+#define JZ_RTC_CTRL_WRDY	BIT(7)
+#define JZ_RTC_CTRL_1HZ		BIT(6)
+#define JZ_RTC_CTRL_1HZ_IRQ	BIT(5)
+#define JZ_RTC_CTRL_AF		BIT(4)
+#define JZ_RTC_CTRL_AF_IRQ	BIT(3)
+#define JZ_RTC_CTRL_AE		BIT(2)
+#define JZ_RTC_CTRL_ENABLE	BIT(0)
+
+struct jz4740_rtc {
+	struct resource *mem;
+	void __iomem *base;
+
+	struct rtc_device *rtc;
+
+	unsigned int irq;
+
+	spinlock_t lock;
+};
+
+static inline uint32_t jz4740_rtc_reg_read(struct jz4740_rtc *rtc, size_t reg)
+{
+	return readl(rtc->base + reg);
+}
+
+static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc)
+{
+	uint32_t ctrl;
+	int timeout = 1000;
+
+	do {
+		ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+	} while (!(ctrl & JZ_RTC_CTRL_WRDY) && --timeout);
+
+	return timeout ? 0 : -EIO;
+}
+
+static inline int jz4740_rtc_reg_write(struct jz4740_rtc *rtc, size_t reg,
+	uint32_t val)
+{
+	int ret;
+	ret = jz4740_rtc_wait_write_ready(rtc);
+	if (ret == 0)
+		writel(val, rtc->base + reg);
+
+	return ret;
+}
+
+static int jz4740_rtc_ctrl_set_bits(struct jz4740_rtc *rtc, uint32_t mask,
+	bool set)
+{
+	int ret;
+	unsigned long flags;
+	uint32_t ctrl;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	/* Don't clear interrupt flags by accident */
+	ctrl |= JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF;
+
+	if (set)
+		ctrl |= mask;
+	else
+		ctrl &= ~mask;
+
+	ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_CTRL, ctrl);
+
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return ret;
+}
+
+static int jz4740_rtc_read_time(struct device *dev, struct rtc_time *time)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	uint32_t secs, secs2;
+	int timeout = 5;
+
+	/* If the seconds register is read while it is updated, it can contain a
+	 * bogus value. This can be avoided by making sure that two consecutive
+	 * reads have the same value.
+	 */
+	secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+	secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+
+	while (secs != secs2 && --timeout) {
+		secs = secs2;
+		secs2 = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC);
+	}
+
+	if (timeout == 0)
+		return -EIO;
+
+	rtc_time_to_tm(secs, time);
+
+	return rtc_valid_tm(time);
+}
+
+static int jz4740_rtc_set_mmss(struct device *dev, unsigned long secs)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+
+	return jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, secs);
+}
+
+static int jz4740_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	uint32_t secs;
+	uint32_t ctrl;
+
+	secs = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SEC_ALARM);
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	alrm->enabled = !!(ctrl & JZ_RTC_CTRL_AE);
+	alrm->pending = !!(ctrl & JZ_RTC_CTRL_AF);
+
+	rtc_time_to_tm(secs, &alrm->time);
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int jz4740_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	int ret;
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	unsigned long secs;
+
+	rtc_tm_to_time(&alrm->time, &secs);
+
+	ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC_ALARM, secs);
+	if (!ret)
+		ret = jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_AE, alrm->enabled);
+
+	return ret;
+}
+
+static int jz4740_rtc_update_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	return jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ_IRQ, enable);
+}
+
+static int jz4740_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	return jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_AF_IRQ, enable);
+}
+
+static struct rtc_class_ops jz4740_rtc_ops = {
+	.read_time	= jz4740_rtc_read_time,
+	.set_mmss	= jz4740_rtc_set_mmss,
+	.read_alarm	= jz4740_rtc_read_alarm,
+	.set_alarm	= jz4740_rtc_set_alarm,
+	.update_irq_enable = jz4740_rtc_update_irq_enable,
+	.alarm_irq_enable = jz4740_rtc_alarm_irq_enable,
+};
+
+static irqreturn_t jz4740_rtc_irq(int irq, void *data)
+{
+	struct jz4740_rtc *rtc = data;
+	uint32_t ctrl;
+	unsigned long events = 0;
+
+	ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL);
+
+	if (ctrl & JZ_RTC_CTRL_1HZ)
+		events |= (RTC_UF | RTC_IRQF);
+
+	if (ctrl & JZ_RTC_CTRL_AF)
+		events |= (RTC_AF | RTC_IRQF);
+
+	rtc_update_irq(rtc->rtc, 1, events);
+
+	jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ | JZ_RTC_CTRL_AF, false);
+
+	return IRQ_HANDLED;
+}
+
+void jz4740_rtc_poweroff(struct device *dev)
+{
+	struct jz4740_rtc *rtc = dev_get_drvdata(dev);
+	jz4740_rtc_reg_write(rtc, JZ_REG_RTC_HIBERNATE, 1);
+}
+EXPORT_SYMBOL_GPL(jz4740_rtc_poweroff);
+
+static int __devinit jz4740_rtc_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_rtc *rtc;
+	uint32_t scratchpad;
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	rtc->irq = platform_get_irq(pdev, 0);
+	if (rtc->irq < 0) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform irq\n");
+		goto err_free;
+	}
+
+	rtc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!rtc->mem) {
+		ret = -ENOENT;
+		dev_err(&pdev->dev, "Failed to get platform mmio memory\n");
+		goto err_free;
+	}
+
+	rtc->mem = request_mem_region(rtc->mem->start, resource_size(rtc->mem),
+					pdev->name);
+	if (!rtc->mem) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+		goto err_free;
+	}
+
+	rtc->base = ioremap_nocache(rtc->mem->start, resource_size(rtc->mem));
+	if (!rtc->base) {
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+		goto err_release_mem_region;
+	}
+
+	spin_lock_init(&rtc->lock);
+
+	platform_set_drvdata(pdev, rtc);
+
+	rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &jz4740_rtc_ops,
+					THIS_MODULE);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		dev_err(&pdev->dev, "Failed to register rtc device: %d\n", ret);
+		goto err_iounmap;
+	}
+
+	ret = request_irq(rtc->irq, jz4740_rtc_irq, 0,
+				pdev->name, rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request rtc irq: %d\n", ret);
+		goto err_unregister_rtc;
+	}
+
+	scratchpad = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_SCRATCHPAD);
+	if (scratchpad != 0x12345678) {
+		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SCRATCHPAD, 0x12345678);
+		ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, 0);
+		if (ret) {
+			dev_err(&pdev->dev, "Could not write write to RTC registers\n");
+			goto err_free_irq;
+		}
+	}
+
+	return 0;
+
+err_free_irq:
+	free_irq(rtc->irq, rtc);
+err_unregister_rtc:
+	rtc_device_unregister(rtc->rtc);
+err_iounmap:
+	platform_set_drvdata(pdev, NULL);
+	iounmap(rtc->base);
+err_release_mem_region:
+	release_mem_region(rtc->mem->start, resource_size(rtc->mem));
+err_free:
+	kfree(rtc);
+
+	return ret;
+}
+
+static int __devexit jz4740_rtc_remove(struct platform_device *pdev)
+{
+	struct jz4740_rtc *rtc = platform_get_drvdata(pdev);
+
+	free_irq(rtc->irq, rtc);
+
+	rtc_device_unregister(rtc->rtc);
+
+	iounmap(rtc->base);
+	release_mem_region(rtc->mem->start, resource_size(rtc->mem));
+
+	kfree(rtc);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+struct platform_driver jz4740_rtc_driver = {
+	.probe = jz4740_rtc_probe,
+	.remove = __devexit_p(jz4740_rtc_remove),
+	.driver = {
+		.name = "jz4740-rtc",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_rtc_init(void)
+{
+	return platform_driver_register(&jz4740_rtc_driver);
+}
+module_init(jz4740_rtc_init);
+
+static void __exit jz4740_rtc_exit(void)
+{
+	platform_driver_unregister(&jz4740_rtc_driver);
+}
+module_exit(jz4740_rtc_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("RTC driver for the JZ4740 SoC\n");
+MODULE_ALIAS("platform:jz4740-rtc");
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index dd88803e489..7158f9528ec 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -701,7 +701,7 @@ int __init dasd_eer_init(void)
 void dasd_eer_exit(void)
 {
 	if (dasd_eer_dev) {
-		WARN_ON(misc_deregister(dasd_eer_dev) != 0);
+		misc_deregister(dasd_eer_dev);
 		kfree(dasd_eer_dev);
 		dasd_eer_dev = NULL;
 	}
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 2ed3f82e5c3..e021ec663ef 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -627,7 +627,7 @@ out_iucv:
 static void __exit mon_exit(void)
 {
 	segment_unload(mon_dcss_name);
-	WARN_ON(misc_deregister(&mon_dev) != 0);
+	misc_deregister(&mon_dev);
 	device_unregister(monreader_device);
 	driver_unregister(&monreader_driver);
 	iucv_unregister(&monreader_iucv_handler, 1);
diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c
index 98a49dfda1d..572a1e7fd09 100644
--- a/drivers/s390/char/monwriter.c
+++ b/drivers/s390/char/monwriter.c
@@ -380,7 +380,7 @@ out_driver:
 
 static void __exit mon_exit(void)
 {
-	WARN_ON(misc_deregister(&mon_dev) != 0);
+	misc_deregister(&mon_dev);
 	platform_device_unregister(monwriter_pdev);
 	platform_driver_unregister(&monwriter_pdrv);
 }
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index 8bfdd63a1fc..3e89c313e98 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -317,7 +317,7 @@ static struct bbc_i2c_bus * __init attach_one_i2c(struct of_device *op, int inde
 
 	bp->waiting = 0;
 	init_waitqueue_head(&bp->wq);
-	if (request_irq(op->irqs[0], bbc_i2c_interrupt,
+	if (request_irq(op->archdata.irqs[0], bbc_i2c_interrupt,
 			IRQF_SHARED, "bbc_i2c", bp))
 		goto fail;
 
@@ -373,7 +373,7 @@ static int __devinit bbc_i2c_probe(struct of_device *op,
 
 	err = bbc_envctrl_init(bp);
 	if (err) {
-		free_irq(op->irqs[0], bp);
+		free_irq(op->archdata.irqs[0], bp);
 		if (bp->i2c_bussel_reg)
 			of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
 		if (bp->i2c_control_regs)
@@ -392,7 +392,7 @@ static int __devexit bbc_i2c_remove(struct of_device *op)
 
 	bbc_envctrl_cleanup(bp);
 
-	free_irq(op->irqs[0], bp);
+	free_irq(op->archdata.irqs[0], bp);
 
 	if (bp->i2c_bussel_reg)
 		of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
@@ -425,12 +425,12 @@ static struct of_platform_driver bbc_i2c_driver = {
 
 static int __init bbc_i2c_init(void)
 {
-	return of_register_driver(&bbc_i2c_driver, &of_bus_type);
+	return of_register_platform_driver(&bbc_i2c_driver);
 }
 
 static void __exit bbc_i2c_exit(void)
 {
-	of_unregister_driver(&bbc_i2c_driver);
+	of_unregister_platform_driver(&bbc_i2c_driver);
 }
 
 module_init(bbc_i2c_init);
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 7baf1b64403..47db97583ea 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -13,7 +13,7 @@
 #include <linux/miscdevice.h>
 #include <linux/ioport.h>		/* request_region */
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <asm/atomic.h>
@@ -26,6 +26,7 @@
 #define DRIVER_NAME	"d7s"
 #define PFX		DRIVER_NAME ": "
 
+static DEFINE_MUTEX(d7s_mutex);
 static int sol_compat = 0;		/* Solaris compatibility mode	*/
 
 /* Solaris compatibility flag -
@@ -74,7 +75,6 @@ static int d7s_open(struct inode *inode, struct file *f)
 {
 	if (D7S_MINOR != iminor(inode))
 		return -ENODEV;
-	cycle_kernel_lock();
 	atomic_inc(&d7s_users);
 	return 0;
 }
@@ -110,7 +110,7 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	if (D7S_MINOR != iminor(file->f_path.dentry->d_inode))
 		return -ENODEV;
 
-	lock_kernel();
+	mutex_lock(&d7s_mutex);
 	switch (cmd) {
 	case D7SIOCWR:
 		/* assign device register values we mask-out D7S_FLIP
@@ -151,7 +151,7 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		writeb(regs, p->regs);
 		break;
 	};
-	unlock_kernel();
+	mutex_unlock(&d7s_mutex);
 
 	return error;
 }
@@ -277,12 +277,12 @@ static struct of_platform_driver d7s_driver = {
 
 static int __init d7s_init(void)
 {
-	return of_register_driver(&d7s_driver, &of_bus_type);
+	return of_register_platform_driver(&d7s_driver);
 }
 
 static void __exit d7s_exit(void)
 {
-	of_unregister_driver(&d7s_driver);
+	of_unregister_platform_driver(&d7s_driver);
 }
 
 module_init(d7s_init);
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index c8166ecf527..3c27f45e2b6 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -27,7 +27,6 @@
 #include <linux/kmod.h>
 #include <linux/reboot.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 
@@ -699,7 +698,6 @@ envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 static int
 envctrl_open(struct inode *inode, struct file *file)
 {
-	cycle_kernel_lock();
 	file->private_data = NULL;
 	return 0;
 }
@@ -1142,12 +1140,12 @@ static struct of_platform_driver envctrl_driver = {
 
 static int __init envctrl_init(void)
 {
-	return of_register_driver(&envctrl_driver, &of_bus_type);
+	return of_register_platform_driver(&envctrl_driver);
 }
 
 static void __exit envctrl_exit(void)
 {
-	of_unregister_driver(&envctrl_driver);
+	of_unregister_platform_driver(&envctrl_driver);
 }
 
 module_init(envctrl_init);
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 368d66294d8..8bb31c584b6 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -10,7 +10,7 @@
 #include <linux/fcntl.h>
 #include <linux/poll.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/of.h>
@@ -22,6 +22,7 @@
 #include <asm/io.h>
 #include <asm/upa.h>
 
+static DEFINE_MUTEX(flash_mutex);
 static DEFINE_SPINLOCK(flash_lock);
 static struct {
 	unsigned long read_base;	/* Physical read address */
@@ -80,7 +81,7 @@ flash_mmap(struct file *file, struct vm_area_struct *vma)
 static long long
 flash_llseek(struct file *file, long long offset, int origin)
 {
-	lock_kernel();
+	mutex_lock(&flash_mutex);
 	switch (origin) {
 		case 0:
 			file->f_pos = offset;
@@ -94,10 +95,10 @@ flash_llseek(struct file *file, long long offset, int origin)
 			file->f_pos = flash.read_size;
 			break;
 		default:
-			unlock_kernel();
+			mutex_unlock(&flash_mutex);
 			return -EINVAL;
 	}
-	unlock_kernel();
+	mutex_unlock(&flash_mutex);
 	return file->f_pos;
 }
 
@@ -125,13 +126,13 @@ flash_read(struct file * file, char __user * buf,
 static int
 flash_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
+	mutex_lock(&flash_mutex);
 	if (test_and_set_bit(0, (void *)&flash.busy) != 0) {
-		unlock_kernel();
+		mutex_unlock(&flash_mutex);
 		return -EBUSY;
 	}
 
-	unlock_kernel();
+	mutex_unlock(&flash_mutex);
 	return 0;
 }
 
@@ -218,12 +219,12 @@ static struct of_platform_driver flash_driver = {
 
 static int __init flash_init(void)
 {
-	return of_register_driver(&flash_driver, &of_bus_type);
+	return of_register_platform_driver(&flash_driver);
 }
 
 static void __exit flash_cleanup(void)
 {
-	of_unregister_driver(&flash_driver);
+	of_unregister_platform_driver(&flash_driver);
 }
 
 module_init(flash_init);
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index aacbe14e2e7..8d6e508222b 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -33,7 +33,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/miscdevice.h>
 #include <linux/init.h>
@@ -61,6 +61,7 @@ typedef struct openprom_private_data
 } DATA;
 
 /* ID of the PROM node containing all of the EEPROM options. */
+static DEFINE_MUTEX(openprom_mutex);
 static struct device_node *options_node;
 
 /*
@@ -316,7 +317,7 @@ static long openprom_sunos_ioctl(struct file * file,
 	if (bufsize < 0)
 		return bufsize;
 
-	lock_kernel();
+	mutex_lock(&openprom_mutex);
 
 	switch (cmd) {
 	case OPROMGETOPT:
@@ -367,7 +368,7 @@ static long openprom_sunos_ioctl(struct file * file,
 	}
 
 	kfree(opp);
-	unlock_kernel();
+	mutex_unlock(&openprom_mutex);
 
 	return error;
 }
@@ -558,7 +559,7 @@ static int openprom_bsd_ioctl(struct file * file,
 	void __user *argp = (void __user *)arg;
 	int err;
 
-	lock_kernel();
+	mutex_lock(&openprom_mutex);
 	switch (cmd) {
 	case OPIOCGET:
 		err = opiocget(argp, data);
@@ -589,7 +590,7 @@ static int openprom_bsd_ioctl(struct file * file,
 		err = -EINVAL;
 		break;
 	};
-	unlock_kernel();
+	mutex_unlock(&openprom_mutex);
 
 	return err;
 }
@@ -697,11 +698,11 @@ static int openprom_open(struct inode * inode, struct file * file)
 	if (!data)
 		return -ENOMEM;
 
-	lock_kernel();
+	mutex_lock(&openprom_mutex);
 	data->current_node = of_find_node_by_path("/");
 	data->lastnode = data->current_node;
 	file->private_data = (void *) data;
-	unlock_kernel();
+	mutex_unlock(&openprom_mutex);
 
 	return 0;
 }
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 5f253665a1d..41eb6725ff5 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -9,7 +9,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
@@ -72,6 +72,7 @@ struct ts102_regs {
 #define UCTRL_STAT_RXNE_STA        0x04    /* receive FIFO not empty status */
 #define UCTRL_STAT_RXO_STA         0x08    /* receive FIFO overflow status */
 
+static DEFINE_MUTEX(uctrl_mutex);
 static const char *uctrl_extstatus[16] = {
         "main power available",
         "internal battery attached",
@@ -210,10 +211,10 @@ uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 static int
 uctrl_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
+	mutex_lock(&uctrl_mutex);
 	uctrl_get_event_status(global_driver);
 	uctrl_get_external_status(global_driver);
-	unlock_kernel();
+	mutex_unlock(&uctrl_mutex);
 	return 0;
 }
 
@@ -367,7 +368,7 @@ static int __devinit uctrl_probe(struct of_device *op,
 		goto out_free;
 	}
 
-	p->irq = op->irqs[0];
+	p->irq = op->archdata.irqs[0];
 	err = request_irq(p->irq, uctrl_interrupt, 0, "uctrl", p);
 	if (err) {
 		printk(KERN_ERR "uctrl: Unable to register irq.\n");
@@ -437,12 +438,12 @@ static struct of_platform_driver uctrl_driver = {
 
 static int __init uctrl_init(void)
 {
-	return of_register_driver(&uctrl_driver, &of_bus_type);
+	return of_register_platform_driver(&uctrl_driver);
 }
 
 static void __exit uctrl_exit(void)
 {
-	of_unregister_driver(&uctrl_driver);
+	of_unregister_platform_driver(&uctrl_driver);
 }
 
 module_init(uctrl_init);
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index 07fdfe57e38..a4e04c50c43 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -192,7 +192,6 @@ static struct bin_attribute arcmsr_sysfs_message_read_attr = {
 	.attr = {
 		.name = "mu_read",
 		.mode = S_IRUSR ,
-		.owner = THIS_MODULE,
 	},
 	.size = 1032,
 	.read = arcmsr_sysfs_iop_message_read,
@@ -202,7 +201,6 @@ static struct bin_attribute arcmsr_sysfs_message_write_attr = {
 	.attr = {
 		.name = "mu_write",
 		.mode = S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 1032,
 	.write = arcmsr_sysfs_iop_message_write,
@@ -212,7 +210,6 @@ static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
 	.attr = {
 		.name = "mu_clear",
 		.mode = S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 1,
 	.write = arcmsr_sysfs_iop_message_clear,
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 868874c28f9..162704cf6a9 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -2778,7 +2778,6 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
 	.attr = {
 		.name = "lpfc_drvr_stat_data",
 		.mode = S_IRUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = LPFC_MAX_TARGET * MAX_STAT_DATA_SIZE_PER_TARGET,
 	.read = sysfs_drvr_stat_data_read,
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 9d70aef9922..61f49bdcc0c 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -49,7 +49,6 @@
 #include <scsi/scsi_host.h>
 #include "aha152x.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -101,9 +100,8 @@ static int aha152x_probe(struct pcmcia_device *link)
     info->p_dev = link;
     link->priv = info;
 
-    link->io.NumPorts1 = 0x20;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-    link->io.IOAddrLines = 10;
+    link->resource[0]->end = 0x20;
+    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -131,15 +129,16 @@ static int aha152x_config_check(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
+	p_dev->io_lines = 10;
 	/* For New Media T&J, look for a SCSI window */
 	if (cfg->io.win[0].len >= 0x20)
-		p_dev->io.BasePort1 = cfg->io.win[0].base;
+		p_dev->resource[0]->start = cfg->io.win[0].base;
 	else if ((cfg->io.nwin > 1) &&
 		 (cfg->io.win[1].len >= 0x20))
-		p_dev->io.BasePort1 = cfg->io.win[1].base;
+		p_dev->resource[0]->start = cfg->io.win[1].base;
 	if ((cfg->io.nwin > 0) &&
-	    (p_dev->io.BasePort1 < 0xffff)) {
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+	    (p_dev->resource[0]->start < 0xffff)) {
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -EINVAL;
@@ -168,7 +167,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
     /* Set configuration options for the aha152x driver */
     memset(&s, 0, sizeof(s));
     s.conf        = "PCMCIA setup";
-    s.io_port     = link->io.BasePort1;
+    s.io_port     = link->resource[0]->start;
     s.irq         = link->irq;
     s.scsiid      = host_id;
     s.reconnect   = reconnect;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 21b141151df..13dbe5c4849 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -46,7 +46,6 @@
 #include <scsi/scsi_host.h>
 #include "fdomain.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -84,9 +83,8 @@ static int fdomain_probe(struct pcmcia_device *link)
 
 	info->p_dev = link;
 	link->priv = info;
-	link->io.NumPorts1 = 0x10;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.IOAddrLines = 10;
+	link->resource[0]->end = 0x10;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
@@ -113,8 +111,9 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	p_dev->io_lines = 10;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -138,10 +137,10 @@ static int fdomain_config(struct pcmcia_device *link)
 	    goto failed;
 
     /* A bad hack... */
-    release_region(link->io.BasePort1, link->io.NumPorts1);
+    release_region(link->resource[0]->start, resource_size(link->resource[0]));
 
     /* Set configuration options for the fdomain driver */
-    sprintf(str, "%d,%d", link->io.BasePort1, link->irq);
+    sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
     fdomain_setup(str);
 
     host = __fdomain_16x0_detect(&fdomain_driver_template);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 0f0e112c3f8..dd9b40306f3 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -47,7 +47,6 @@
 #include <scsi/scsi.h>
 #include <scsi/scsi_ioctl.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -1559,9 +1558,8 @@ static int nsp_cs_probe(struct pcmcia_device *link)
 	nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
 
 	/* The io structure describes IO port mapping */
-	link->io.NumPorts1	 = 0x10;
-	link->io.Attributes1	 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.IOAddrLines	 = 10;	/* not used */
+	link->resource[0]->end	 = 0x10;
+	link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO;
 
 	/* General socket configuration */
 	link->conf.Attributes	 = CONF_ENABLE_IRQ;
@@ -1642,29 +1640,27 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 		/* IO window settings */
-		p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+		p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 		if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			p_dev->io.BasePort1 = io->win[0].base;
-			p_dev->io.NumPorts1 = io->win[0].len;
+			p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+			p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+			p_dev->resource[0]->flags |=
+				pcmcia_io_cfg_data_width(io->flags);
+			p_dev->resource[0]->start = io->win[0].base;
+			p_dev->resource[0]->end = io->win[0].len;
 			if (io->nwin > 1) {
-				p_dev->io.Attributes2 = p_dev->io.Attributes1;
-				p_dev->io.BasePort2 = io->win[1].base;
-				p_dev->io.NumPorts2 = io->win[1].len;
+				p_dev->resource[1]->flags =
+					p_dev->resource[0]->flags;
+				p_dev->resource[1]->start = io->win[1].base;
+				p_dev->resource[1]->end = io->win[1].len;
 			}
 			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			if (pcmcia_request_io(p_dev) != 0)
 				goto next_entry;
 		}
 
 		if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-			memreq_t	map;
 			cistpl_mem_t	*mem =
 				(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 			cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
@@ -1676,8 +1672,8 @@ static int nsp_cs_config_check(struct pcmcia_device *p_dev,
 			cfg_mem->req.AccessSpeed = 0;
 			if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0)
 				goto next_entry;
-			map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
+			if (pcmcia_map_mem_page(p_dev, p_dev->win,
+					mem->win[0].card_addr) != 0)
 				goto next_entry;
 
 			cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size);
@@ -1720,17 +1716,19 @@ static int nsp_cs_config(struct pcmcia_device *link)
 		goto cs_failed;
 
 	if (free_ports) {
-		if (link->io.BasePort1) {
-			release_region(link->io.BasePort1, link->io.NumPorts1);
+		if (link->resource[0]) {
+			release_region(link->resource[0]->start,
+					resource_size(link->resource[0]));
 		}
-		if (link->io.BasePort2) {
-			release_region(link->io.BasePort2, link->io.NumPorts2);
+		if (link->resource[1]) {
+			release_region(link->resource[1]->start,
+					resource_size(link->resource[1]));
 		}
 	}
 
 	/* Set port and IRQ */
-	data->BaseAddress = link->io.BasePort1;
-	data->NumAddress  = link->io.NumPorts1;
+	data->BaseAddress = link->resource[0]->start;
+	data->NumAddress  = resource_size(link->resource[0]);
 	data->IrqNumber   = link->irq;
 
 	nsp_dbg(NSP_DEBUG_INIT, "I/O[0x%x+0x%x] IRQ %d",
@@ -1765,13 +1763,10 @@ static int nsp_cs_config(struct pcmcia_device *link)
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
 		printk(", irq %d", link->irq);
 	}
-	if (link->io.NumPorts1) {
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1+link->io.NumPorts1-1);
-	}
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2+link->io.NumPorts2-1);
+	if (link->resource[0])
+		printk(", io %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	if (link->win)
 		printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
 		       cfg_mem->req.Base+cfg_mem->req.Size-1);
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index f0fc6baed9f..eb775f1a523 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -48,7 +48,6 @@
 #include <scsi/scsi_host.h>
 #include "../qlogicfas408.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -157,9 +156,8 @@ static int qlogic_probe(struct pcmcia_device *link)
 		return -ENOMEM;
 	info->p_dev = link;
 	link->priv = info;
-	link->io.NumPorts1 = 16;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.IOAddrLines = 10;
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
@@ -186,13 +184,14 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
 			       unsigned int vcc,
 			       void *priv_data)
 {
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->io_lines = 10;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
 
-	if (p_dev->io.BasePort1 == 0)
+	if (p_dev->resource[0]->start == 0)
 		return -ENODEV;
 
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int qlogic_config(struct pcmcia_device * link)
@@ -216,18 +215,18 @@ static int qlogic_config(struct pcmcia_device * link)
 
 	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
 		/* set ATAcmd */
-		outb(0xb4, link->io.BasePort1 + 0xd);
-		outb(0x24, link->io.BasePort1 + 0x9);
-		outb(0x04, link->io.BasePort1 + 0xd);
+		outb(0xb4, link->resource[0]->start + 0xd);
+		outb(0x24, link->resource[0]->start + 0x9);
+		outb(0x04, link->resource[0]->start + 0xd);
 	}
 
 	/* The KXL-810AN has a bigger IO port window */
-	if (link->io.NumPorts1 == 32)
+	if (resource_size(link->resource[0]) == 32)
 		host = qlogic_detect(&qlogicfas_driver_template, link,
-			link->io.BasePort1 + 16, link->irq);
+			link->resource[0]->start + 16, link->irq);
 	else
 		host = qlogic_detect(&qlogicfas_driver_template, link,
-			link->io.BasePort1, link->irq);
+			link->resource[0]->start, link->irq);
 	
 	if (!host) {
 		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
@@ -269,9 +268,9 @@ static int qlogic_resume(struct pcmcia_device *link)
 	if ((info->manf_id == MANFID_MACNICA) ||
 	    (info->manf_id == MANFID_PIONEER) ||
 	    (info->manf_id == 0x0098)) {
-		outb(0x80, link->io.BasePort1 + 0xd);
-		outb(0x24, link->io.BasePort1 + 0x9);
-		outb(0x04, link->io.BasePort1 + 0xd);
+		outb(0x80, link->resource[0]->start + 0xd);
+		outb(0x24, link->resource[0]->start + 0x9);
+		outb(0x04, link->resource[0]->start + 0xd);
 	}
 	/* Ugggglllyyyy!!! */
 	qlogicfas408_bus_reset(NULL);
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index a5116417117..321e390c912 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -71,7 +71,6 @@
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -691,13 +690,14 @@ static int SYM53C500_config_check(struct pcmcia_device *p_dev,
 				  unsigned int vcc,
 				  void *priv_data)
 {
-	p_dev->io.BasePort1 = cfg->io.win[0].base;
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->io_lines = 10;
+	p_dev->resource[0]->start = cfg->io.win[0].base;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
 
-	if (p_dev->io.BasePort1 == 0)
+	if (p_dev->resource[0]->start == 0)
 		return -ENODEV;
 
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static int
@@ -734,9 +734,9 @@ SYM53C500_config(struct pcmcia_device *link)
 	    (info->manf_id == MANFID_PIONEER) ||
 	    (info->manf_id == 0x0098)) {
 		/* set ATAcmd */
-		outb(0xb4, link->io.BasePort1 + 0xd);
-		outb(0x24, link->io.BasePort1 + 0x9);
-		outb(0x04, link->io.BasePort1 + 0xd);
+		outb(0xb4, link->resource[0]->start + 0xd);
+		outb(0x24, link->resource[0]->start + 0x9);
+		outb(0x04, link->resource[0]->start + 0xd);
 	}
 
 	/*
@@ -749,7 +749,7 @@ SYM53C500_config(struct pcmcia_device *link)
 	*	0x130, 0x230, 0x280, 0x290,
 	*	0x320, 0x330, 0x340, 0x350
 	*/
-	port_base = link->io.BasePort1;
+	port_base = link->resource[0]->start;
 	irq_level = link->irq;
 
 	DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
@@ -822,15 +822,15 @@ static int sym53c500_resume(struct pcmcia_device *link)
 	if ((info->manf_id == MANFID_MACNICA) ||
 	    (info->manf_id == MANFID_PIONEER) ||
 	    (info->manf_id == 0x0098)) {
-		outb(0x80, link->io.BasePort1 + 0xd);
-		outb(0x24, link->io.BasePort1 + 0x9);
-		outb(0x04, link->io.BasePort1 + 0xd);
+		outb(0x80, link->resource[0]->start + 0xd);
+		outb(0x24, link->resource[0]->start + 0x9);
+		outb(0x04, link->resource[0]->start + 0xd);
 	}
 	/*
 	 *  If things don't work after a "resume",
 	 *  this is a good place to start looking.
 	 */
-	SYM53C500_int_host_reset(link->io.BasePort1);
+	SYM53C500_int_host_reset(link->resource[0]->start);
 
 	return 0;
 }
@@ -859,9 +859,8 @@ SYM53C500_probe(struct pcmcia_device *link)
 		return -ENOMEM;
 	info->p_dev = link;
 	link->priv = info;
-	link->io.NumPorts1 = 16;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.IOAddrLines = 10;
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index ca5c15c779c..53d7ed0dc16 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -729,7 +729,7 @@ static int __devinit qpti_register_irq(struct qlogicpti *qpti)
 {
 	struct of_device *op = qpti->op;
 
-	qpti->qhost->irq = qpti->irq = op->irqs[0];
+	qpti->qhost->irq = qpti->irq = op->archdata.irqs[0];
 
 	/* We used to try various overly-clever things to
 	 * reduce the interrupt processing overhead on
@@ -1302,7 +1302,7 @@ static int __devinit qpti_sbus_probe(struct of_device *op, const struct of_devic
 	/* Sometimes Antares cards come up not completely
 	 * setup, and we get a report of a zero IRQ.
 	 */
-	if (op->irqs[0] == 0)
+	if (op->archdata.irqs[0] == 0)
 		return -ENODEV;
 
 	host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti));
@@ -1467,12 +1467,12 @@ static struct of_platform_driver qpti_sbus_driver = {
 
 static int __init qpti_init(void)
 {
-	return of_register_driver(&qpti_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&qpti_sbus_driver);
 }
 
 static void __exit qpti_exit(void)
 {
-	of_unregister_driver(&qpti_sbus_driver);
+	of_unregister_platform_driver(&qpti_sbus_driver);
 }
 
 MODULE_DESCRIPTION("QlogicISP SBUS driver");
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 026295e2c53..b4056d14f81 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -148,8 +148,6 @@ static inline void scsi_netlink_exit(void) {}
 /* scsi_pm.c */
 #ifdef CONFIG_PM_OPS
 extern const struct dev_pm_ops scsi_bus_pm_ops;
-#else /* CONFIG_PM_OPS */
-#define scsi_bus_pm_ops		(*NULL)
 #endif
 #ifdef CONFIG_PM_RUNTIME
 extern void scsi_autopm_get_target(struct scsi_target *);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 562fb3bce26..c3f67373a4f 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -381,7 +381,9 @@ struct bus_type scsi_bus_type = {
         .name		= "scsi",
         .match		= scsi_bus_match,
 	.uevent		= scsi_bus_uevent,
+#ifdef CONFIG_PM_OPS
 	.pm		= &scsi_bus_pm_ops,
+#endif
 };
 EXPORT_SYMBOL_GPL(scsi_bus_type);
 
diff --git a/drivers/scsi/sun_esp.c b/drivers/scsi/sun_esp.c
index 386dd9d602b..89ba6fe02f8 100644
--- a/drivers/scsi/sun_esp.c
+++ b/drivers/scsi/sun_esp.c
@@ -116,7 +116,7 @@ static int __devinit esp_sbus_register_irq(struct esp *esp)
 	struct Scsi_Host *host = esp->host;
 	struct of_device *op = esp->dev;
 
-	host->irq = op->irqs[0];
+	host->irq = op->archdata.irqs[0];
 	return request_irq(host->irq, scsi_esp_intr, IRQF_SHARED, "ESP", esp);
 }
 
@@ -644,12 +644,12 @@ static struct of_platform_driver esp_sbus_driver = {
 
 static int __init sunesp_init(void)
 {
-	return of_register_driver(&esp_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&esp_sbus_driver);
 }
 
 static void __exit sunesp_exit(void)
 {
-	of_unregister_driver(&esp_sbus_driver);
+	of_unregister_platform_driver(&esp_sbus_driver);
 }
 
 MODULE_DESCRIPTION("Sun ESP SCSI driver");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 891e1dd65f2..09ef57034c9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -302,7 +302,7 @@ static const struct serial8250_config uart_config[] = {
 	},
 };
 
-#if defined (CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
 
 /* Au1x00 UART hardware has a weird register layout */
 static const u8 au_io_in_map[] = {
@@ -422,7 +422,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
 	return readl(p->membase + offset);
 }
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 static unsigned int au_serial_in(struct uart_port *p, int offset)
 {
 	offset = map_8250_in_reg(p, offset) << p->regshift;
@@ -434,7 +433,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
 	offset = map_8250_out_reg(p, offset) << p->regshift;
 	__raw_writel(value, p->membase + offset);
 }
-#endif
 
 static unsigned int tsi_serial_in(struct uart_port *p, int offset)
 {
@@ -503,12 +501,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = mem32_serial_out;
 		break;
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
 		p->serial_in = au_serial_in;
 		p->serial_out = au_serial_out;
 		break;
-#endif
+
 	case UPIO_TSI:
 		p->serial_in = tsi_serial_in;
 		p->serial_out = tsi_serial_out;
@@ -535,9 +532,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	switch (p->iotype) {
 	case UPIO_MEM:
 	case UPIO_MEM32:
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	case UPIO_AU:
-#endif
 	case UPIO_DWAPB:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
@@ -573,7 +568,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value)
 	serial_outp(up, UART_DLM, value >> 8 & 0xff);
 }
 
-#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_MIPS_ALCHEMY)
 /* Au1x00 haven't got a standard divisor latch */
 static int serial_dl_read(struct uart_8250_port *up)
 {
@@ -2596,11 +2591,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
 
-#ifdef CONFIG_SERIAL_8250_AU1X00
 	/* if access method is AU, it is a 16550 with a quirk */
 	if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
 		up->bugs |= UART_BUG_NOMSR;
-#endif
 
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
 		autoconfig_irq(up);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 8b23165bc5d..e437ce8c174 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -258,14 +258,6 @@ config SERIAL_8250_ACORN
 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
 	  cards.  If unsure, say N.
 
-config SERIAL_8250_AU1X00
-	bool "Au1x00 serial port support"
-	depends on SERIAL_8250 != n && SOC_AU1X00
-	help
-	  If you have an Au1x00 SOC based board and want to use the serial port,
-	  say Y to this option. The driver can handle up to 4 serial ports,
-	  depending on the SOC. If unsure, say N.
-
 config SERIAL_8250_RM9K
 	bool "Support for MIPS RM9xxx integrated serial port"
 	depends on SERIAL_8250 != n && SERIAL_RM9000
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 31f172397af..30626440a06 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3724,6 +3724,17 @@ rs_ioctl(struct tty_struct *tty, struct file * file,
 		return e100_enable_rs485(tty, &rs485data);
 	}
 
+	case TIOCGRS485:
+	{
+		struct serial_rs485 *rs485data =
+			&(((struct e100_serial *)tty->driver_data)->rs485);
+		/* This is the ioctl to get RS485 data from user-space */
+		if (copy_to_user((struct serial_rs485 *) arg,
+					rs485data,
+					sizeof(serial_rs485)))
+			return -EFAULT;
+		break;
+	}
 
 	case TIOCSERWRRS485:
 	{
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index a9a94ae7234..39f9a1adaa7 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -17,6 +17,7 @@
 #include <linux/kdb.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/vt_kern.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -31,6 +32,7 @@ static struct kparam_string kps = {
 	.maxlen			= MAX_CONFIG_LEN,
 };
 
+static int kgdboc_use_kms;  /* 1 if we use kernel mode switching */
 static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
@@ -104,6 +106,12 @@ static int configure_kgdboc(void)
 	kgdboc_io_ops.is_console = 0;
 	kgdb_tty_driver = NULL;
 
+	kgdboc_use_kms = 0;
+	if (strncmp(cptr, "kms,", 4) == 0) {
+		cptr += 4;
+		kgdboc_use_kms = 1;
+	}
+
 	if (kgdboc_register_kbd(&cptr))
 		goto do_register;
 
@@ -201,8 +209,14 @@ static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
 	return configure_kgdboc();
 }
 
+static int dbg_restore_graphics;
+
 static void kgdboc_pre_exp_handler(void)
 {
+	if (!dbg_restore_graphics && kgdboc_use_kms) {
+		dbg_restore_graphics = 1;
+		con_debug_enter(vc_cons[fg_console].d);
+	}
 	/* Increment the module count when the debugger is active */
 	if (!kgdb_connected)
 		try_module_get(THIS_MODULE);
@@ -213,6 +227,10 @@ static void kgdboc_post_exp_handler(void)
 	/* decrement the module count when the debugger detaches */
 	if (!kgdb_connected)
 		module_put(THIS_MODULE);
+	if (kgdboc_use_kms && dbg_restore_graphics) {
+		dbg_restore_graphics = 0;
+		con_debug_leave();
+	}
 }
 
 static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 84a35f69901..1a88b363005 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -113,7 +113,9 @@ struct psc_ops {
 	unsigned char	(*read_char)(struct uart_port *port);
 	void		(*cw_disable_ints)(struct uart_port *port);
 	void		(*cw_restore_ints)(struct uart_port *port);
-	unsigned long	(*getuartclk)(void *p);
+	unsigned int	(*set_baudrate)(struct uart_port *port,
+					struct ktermios *new,
+					struct ktermios *old);
 	int		(*clock)(struct uart_port *port, int enable);
 	int		(*fifoc_init)(void);
 	void		(*fifoc_uninit)(void);
@@ -121,6 +123,16 @@ struct psc_ops {
 	irqreturn_t	(*handle_irq)(struct uart_port *port);
 };
 
+/* setting the prescaler and divisor reg is common for all chips */
+static inline void mpc52xx_set_divisor(struct mpc52xx_psc __iomem *psc,
+				       u16 prescaler, unsigned int divisor)
+{
+	/* select prescaler */
+	out_be16(&psc->mpc52xx_psc_clock_select, prescaler);
+	out_8(&psc->ctur, divisor >> 8);
+	out_8(&psc->ctlr, divisor & 0xff);
+}
+
 #ifdef CONFIG_PPC_MPC52xx
 #define FIFO_52xx(port) ((struct mpc52xx_psc_fifo __iomem *)(PSC(port)+1))
 static void mpc52xx_psc_fifo_init(struct uart_port *port)
@@ -128,9 +140,6 @@ static void mpc52xx_psc_fifo_init(struct uart_port *port)
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	struct mpc52xx_psc_fifo __iomem *fifo = FIFO_52xx(port);
 
-	/* /32 prescaler */
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-
 	out_8(&fifo->rfcntl, 0x00);
 	out_be16(&fifo->rfalarm, 0x1ff);
 	out_8(&fifo->tfcntl, 0x07);
@@ -219,15 +228,47 @@ static void mpc52xx_psc_cw_restore_ints(struct uart_port *port)
 	out_be16(&PSC(port)->mpc52xx_psc_imr, port->read_status_mask);
 }
 
-/* Search for bus-frequency property in this node or a parent */
-static unsigned long mpc52xx_getuartclk(void *p)
+static unsigned int mpc5200_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	/*
-	 * 5200 UARTs have a / 32 prescaler
-	 * but the generic serial code assumes 16
-	 * so return ipb freq / 2
-	 */
-	return mpc5xxx_get_bus_frequency(p) / 2;
+	unsigned int baud;
+	unsigned int divisor;
+
+	/* The 5200 has a fixed /32 prescaler, uartclk contains the ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 32);
+	divisor = (port->uartclk + 16 * baud) / (32 * baud);
+
+	/* enable the /32 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
+}
+
+static unsigned int mpc5200b_psc_set_baudrate(struct uart_port *port,
+					      struct ktermios *new,
+					      struct ktermios *old)
+{
+	unsigned int baud;
+	unsigned int divisor;
+	u16 prescaler;
+
+	/* The 5200B has a selectable /4 or /32 prescaler, uartclk contains the
+	 * ipb freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (32 * 0xffff) + 1,
+				  port->uartclk / 4);
+	divisor = (port->uartclk + 2 * baud) / (4 * baud);
+
+	/* select the proper prescaler and set the divisor */
+	if (divisor > 0xffff) {
+		divisor = (divisor + 4) / 8;
+		prescaler = 0xdd00; /* /32 */
+	} else
+		prescaler = 0xff00; /* /4 */
+	mpc52xx_set_divisor(PSC(port), prescaler, divisor);
+	return baud;
 }
 
 static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np)
@@ -258,7 +299,28 @@ static struct psc_ops mpc52xx_psc_ops = {
 	.read_char = mpc52xx_psc_read_char,
 	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
 	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
-	.getuartclk = mpc52xx_getuartclk,
+	.set_baudrate = mpc5200_psc_set_baudrate,
+	.get_irq = mpc52xx_psc_get_irq,
+	.handle_irq = mpc52xx_psc_handle_irq,
+};
+
+static struct psc_ops mpc5200b_psc_ops = {
+	.fifo_init = mpc52xx_psc_fifo_init,
+	.raw_rx_rdy = mpc52xx_psc_raw_rx_rdy,
+	.raw_tx_rdy = mpc52xx_psc_raw_tx_rdy,
+	.rx_rdy = mpc52xx_psc_rx_rdy,
+	.tx_rdy = mpc52xx_psc_tx_rdy,
+	.tx_empty = mpc52xx_psc_tx_empty,
+	.stop_rx = mpc52xx_psc_stop_rx,
+	.start_tx = mpc52xx_psc_start_tx,
+	.stop_tx = mpc52xx_psc_stop_tx,
+	.rx_clr_irq = mpc52xx_psc_rx_clr_irq,
+	.tx_clr_irq = mpc52xx_psc_tx_clr_irq,
+	.write_char = mpc52xx_psc_write_char,
+	.read_char = mpc52xx_psc_read_char,
+	.cw_disable_ints = mpc52xx_psc_cw_disable_ints,
+	.cw_restore_ints = mpc52xx_psc_cw_restore_ints,
+	.set_baudrate = mpc5200b_psc_set_baudrate,
 	.get_irq = mpc52xx_psc_get_irq,
 	.handle_irq = mpc52xx_psc_handle_irq,
 };
@@ -392,9 +454,35 @@ static void mpc512x_psc_cw_restore_ints(struct uart_port *port)
 	out_be32(&FIFO_512x(port)->rximr, port->read_status_mask & 0x7f);
 }
 
-static unsigned long mpc512x_getuartclk(void *p)
+static unsigned int mpc512x_psc_set_baudrate(struct uart_port *port,
+					     struct ktermios *new,
+					     struct ktermios *old)
 {
-	return mpc5xxx_get_bus_frequency(p);
+	unsigned int baud;
+	unsigned int divisor;
+
+	/*
+	 * The "MPC5121e Microcontroller Reference Manual, Rev. 3" says on
+	 * pg. 30-10 that the chip supports a /32 and a /10 prescaler.
+	 * Furthermore, it states that "After reset, the prescaler by 10
+	 * for the UART mode is selected", but the reset register value is
+	 * 0x0000 which means a /32 prescaler. This is wrong.
+	 *
+	 * In reality using /32 prescaler doesn't work, as it is not supported!
+	 * Use /16 or /10 prescaler, see "MPC5121e Hardware Design Guide",
+	 * Chapter 4.1 PSC in UART Mode.
+	 * Calculate with a /16 prescaler here.
+	 */
+
+	/* uartclk contains the ips freq */
+	baud = uart_get_baud_rate(port, new, old,
+				  port->uartclk / (16 * 0xffff) + 1,
+				  port->uartclk / 16);
+	divisor = (port->uartclk + 8 * baud) / (16 * baud);
+
+	/* enable the /16 prescaler and set the divisor */
+	mpc52xx_set_divisor(PSC(port), 0xdd00, divisor);
+	return baud;
 }
 
 /* Init PSC FIFO Controller */
@@ -498,7 +586,7 @@ static struct psc_ops mpc512x_psc_ops = {
 	.read_char = mpc512x_psc_read_char,
 	.cw_disable_ints = mpc512x_psc_cw_disable_ints,
 	.cw_restore_ints = mpc512x_psc_cw_restore_ints,
-	.getuartclk = mpc512x_getuartclk,
+	.set_baudrate = mpc512x_psc_set_baudrate,
 	.clock = mpc512x_psc_clock,
 	.fifoc_init = mpc512x_psc_fifoc_init,
 	.fifoc_uninit = mpc512x_psc_fifoc_uninit,
@@ -666,8 +754,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	struct mpc52xx_psc __iomem *psc = PSC(port);
 	unsigned long flags;
 	unsigned char mr1, mr2;
-	unsigned short ctr;
-	unsigned int j, baud, quot;
+	unsigned int j;
+	unsigned int baud;
 
 	/* Prepare what we're gonna write */
 	mr1 = 0;
@@ -704,16 +792,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 		mr2 |= MPC52xx_PSC_MODE_TXCTS;
 	}
 
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-	ctr = quot & 0xffff;
-
 	/* Get the lock */
 	spin_lock_irqsave(&port->lock, flags);
 
-	/* Update the per-port timeout */
-	uart_update_timeout(port, new->c_cflag, baud);
-
 	/* Do our best to flush TX & RX, so we don't lose anything */
 	/* But we don't wait indefinitely ! */
 	j = 5000000;	/* Maximum wait */
@@ -737,8 +818,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
 	out_8(&psc->mode, mr1);
 	out_8(&psc->mode, mr2);
-	out_8(&psc->ctur, ctr >> 8);
-	out_8(&psc->ctlr, ctr & 0xff);
+	baud = psc_ops->set_baudrate(port, new, old);
+
+	/* Update the per-port timeout */
+	uart_update_timeout(port, new->c_cflag, baud);
 
 	if (UART_ENABLE_MS(port, new->c_cflag))
 		mpc52xx_uart_enable_ms(port);
@@ -1118,7 +1201,7 @@ mpc52xx_console_setup(struct console *co, char *options)
 		return ret;
 	}
 
-	uartclk = psc_ops->getuartclk(np);
+	uartclk = mpc5xxx_get_bus_frequency(np);
 	if (uartclk == 0) {
 		pr_debug("Could not find uart clock frequency!\n");
 		return -EINVAL;
@@ -1201,6 +1284,7 @@ static struct uart_driver mpc52xx_uart_driver = {
 
 static struct of_device_id mpc52xx_uart_of_match[] = {
 #ifdef CONFIG_PPC_MPC52xx
+	{ .compatible = "fsl,mpc5200b-psc-uart", .data = &mpc5200b_psc_ops, },
 	{ .compatible = "fsl,mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
 	/* binding used by old lite5200 device trees: */
 	{ .compatible = "mpc5200-psc-uart", .data = &mpc52xx_psc_ops, },
@@ -1233,7 +1317,10 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
 	pr_debug("Found %s assigned to ttyPSC%x\n",
 		 mpc52xx_uart_nodes[idx]->full_name, idx);
 
-	uartclk = psc_ops->getuartclk(op->dev.of_node);
+	/* set the uart clock to the input clock of the psc, the different
+	 * prescalers are taken into account in the set_baudrate() methods
+	 * of the respective chip */
+	uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
 	if (uartclk == 0) {
 		dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
 		return -EINVAL;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index ab17c08ddc0..141c69554bd 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -45,7 +45,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -115,16 +114,14 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
 
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
-	conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+	u8 val;
 	int ret;
 
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_read_config_byte(link, 0x800, &val);
 	if (ret)
 		goto failed;
 
-	reg.Action = CS_WRITE;
-	reg.Value = reg.Value | 1;
-	ret = pcmcia_access_configuration_register(link, &reg);
+	ret = pcmcia_write_config_byte(link, 0x800, val | 1);
 	if (ret)
 		goto failed;
 	return 0;
@@ -338,8 +335,8 @@ static int serial_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	link->io.NumPorts1 = 8;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -427,12 +424,13 @@ static int simple_config_check(struct pcmcia_device *p_dev,
 		p_dev->conf.Vpp =
 			cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
+	p_dev->io_lines = ((*try & 0x1) == 0) ?
+			16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+
 	if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
 	    && (cf->io.win[0].base != 0)) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
-			16 : cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -EINVAL;
@@ -449,9 +447,9 @@ static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
 
 	if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
 		for (j = 0; j < 5; j++) {
-			p_dev->io.BasePort1 = base[j];
-			p_dev->io.IOAddrLines = base[j] ? 16 : 3;
-			if (!pcmcia_request_io(p_dev, &p_dev->io))
+			p_dev->resource[0]->start = base[j];
+			p_dev->io_lines = base[j] ? 16 : 3;
+			if (!pcmcia_request_io(p_dev))
 				return 0;
 		}
 	}
@@ -466,13 +464,13 @@ static int simple_config(struct pcmcia_device *link)
 	/* If the card is already configured, look up the port and irq */
 	if (link->function_config) {
 		unsigned int port = 0;
-		if ((link->io.BasePort2 != 0) &&
-		    (link->io.NumPorts2 == 8)) {
-			port = link->io.BasePort2;
+		if ((link->resource[1]->end != 0) &&
+			(resource_size(link->resource[1]) == 8)) {
+			port = link->resource[1]->end;
 			info->slave = 1;
 		} else if ((info->manfid == MANFID_OSITECH) &&
-			   (link->io.NumPorts1 == 0x40)) {
-			port = link->io.BasePort1 + 0x28;
+			(resource_size(link->resource[0]) == 0x40)) {
+			port = link->resource[0]->start + 0x28;
 			info->slave = 1;
 		}
 		if (info->slave) {
@@ -510,7 +508,7 @@ found_port:
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != 0)
 		return -1;
-	return setup_serial(link, info, link->io.BasePort1, link->irq);
+	return setup_serial(link, info, link->resource[0]->start, link->irq);
 }
 
 static int multi_config_check(struct pcmcia_device *p_dev,
@@ -524,10 +522,10 @@ static int multi_config_check(struct pcmcia_device *p_dev,
 	/* The quad port cards have bad CIS's, so just look for a
 	   window larger than 8 ports and assume it will be right */
 	if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io)) {
-			*base2 = p_dev->io.BasePort1 + 8;
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+		if (!pcmcia_request_io(p_dev)) {
+			*base2 = p_dev->resource[0]->start + 8;
 			return 0;
 		}
 	}
@@ -543,11 +541,11 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
 	int *base2 = priv_data;
 
 	if (cf->io.nwin == 2) {
-		p_dev->io.BasePort1 = cf->io.win[0].base;
-		p_dev->io.BasePort2 = cf->io.win[1].base;
-		p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
-		if (!pcmcia_request_io(p_dev, &p_dev->io)) {
-			*base2 = p_dev->io.BasePort2;
+		p_dev->resource[0]->start = cf->io.win[0].base;
+		p_dev->resource[1]->start = cf->io.win[1].base;
+		p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+		if (!pcmcia_request_io(p_dev)) {
+			*base2 = p_dev->resource[1]->start;
 			return 0;
 		}
 	}
@@ -560,10 +558,10 @@ static int multi_config(struct pcmcia_device *link)
 	int i, base2 = 0;
 
 	/* First, look for a generic full-sized window */
-	link->io.NumPorts1 = info->multi * 8;
+	link->resource[0]->end = info->multi * 8;
 	if (pcmcia_loop_config(link, multi_config_check, &base2)) {
 		/* If that didn't work, look for two windows */
-		link->io.NumPorts1 = link->io.NumPorts2 = 8;
+		link->resource[0]->end = link->resource[1]->end = 8;
 		info->multi = 2;
 		if (pcmcia_loop_config(link, multi_config_check_notpicky,
 				       &base2)) {
@@ -599,9 +597,9 @@ static int multi_config(struct pcmcia_device *link)
 		    link->conf.ConfigIndex == 3) {
 			err = setup_serial(link, info, base2,
 					link->irq);
-			base2 = link->io.BasePort1;
+			base2 = link->resource[0]->start;;
 		} else {
-			err = setup_serial(link, info, link->io.BasePort1,
+			err = setup_serial(link, info, link->resource[0]->start,
 					link->irq);
 		}
 		info->c950ctrl = base2;
@@ -616,7 +614,7 @@ static int multi_config(struct pcmcia_device *link)
 		return 0;
 	}
 
-	setup_serial(link, info, link->io.BasePort1, link->irq);
+	setup_serial(link, info, link->resource[0]->start, link->irq);
 	for (i = 0; i < info->multi - 1; i++)
 		setup_serial(link, info, base2 + (8 * i),
 				link->irq);
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 890f9174296..a779e22d213 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -525,7 +525,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 	unsigned long minor;
 	int err;
 
-	if (op->irqs[0] == 0xffffffff)
+	if (op->archdata.irqs[0] == 0xffffffff)
 		return -ENODEV;
 
 	port = kzalloc(sizeof(struct uart_port), GFP_KERNEL);
@@ -557,7 +557,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m
 
 	port->membase = (unsigned char __iomem *) __pa(port);
 
-	port->irq = op->irqs[0];
+	port->irq = op->archdata.irqs[0];
 
 	port->dev = &op->dev;
 
@@ -644,12 +644,12 @@ static int __init sunhv_init(void)
 	if (tlb_type != hypervisor)
 		return -ENODEV;
 
-	return of_register_driver(&hv_driver, &of_bus_type);
+	return of_register_platform_driver(&hv_driver);
 }
 
 static void __exit sunhv_exit(void)
 {
-	of_unregister_driver(&hv_driver);
+	of_unregister_platform_driver(&hv_driver);
 }
 
 module_init(sunhv_init);
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 5e81bc6b48b..9845fb1cfb1 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -969,7 +969,7 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up,
 		return -ENOMEM;
 	up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
 
-	up->port.irq = op->irqs[0];
+	up->port.irq = op->archdata.irqs[0];
 
 	up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
 	up->port.iotype = UPIO_MEM;
@@ -1130,12 +1130,12 @@ static int __init sunsab_init(void)
 		}
 	}
 
-	return of_register_driver(&sab_driver, &of_bus_type);
+	return of_register_platform_driver(&sab_driver);
 }
 
 static void __exit sunsab_exit(void)
 {
-	of_unregister_driver(&sab_driver);
+	of_unregister_platform_driver(&sab_driver);
 	if (sunsab_reg.nr) {
 		sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
 	}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index ffbf4553f66..3cdf74822db 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1443,7 +1443,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m
 		return -ENOMEM;
 	}
 
-	up->port.irq = op->irqs[0];
+	up->port.irq = op->archdata.irqs[0];
 
 	up->port.dev = &op->dev;
 
@@ -1586,7 +1586,7 @@ static int __init sunsu_init(void)
 			return err;
 	}
 
-	err = of_register_driver(&su_driver, &of_bus_type);
+	err = of_register_platform_driver(&su_driver);
 	if (err && num_uart)
 		sunserial_unregister_minors(&sunsu_reg, num_uart);
 
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index f9a24f4ebb3..d1e6bcb5954 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1426,7 +1426,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	rp = sunzilog_chip_regs[inst];
 
 	if (zilog_irq == -1)
-		zilog_irq = op->irqs[0];
+		zilog_irq = op->archdata.irqs[0];
 
 	up = &sunzilog_port_table[inst * 2];
 
@@ -1434,7 +1434,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	up[0].port.mapbase = op->resource[0].start + 0x00;
 	up[0].port.membase = (void __iomem *) &rp->channelA;
 	up[0].port.iotype = UPIO_MEM;
-	up[0].port.irq = op->irqs[0];
+	up[0].port.irq = op->archdata.irqs[0];
 	up[0].port.uartclk = ZS_CLOCK;
 	up[0].port.fifosize = 1;
 	up[0].port.ops = &sunzilog_pops;
@@ -1451,7 +1451,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 	up[1].port.mapbase = op->resource[0].start + 0x04;
 	up[1].port.membase = (void __iomem *) &rp->channelB;
 	up[1].port.iotype = UPIO_MEM;
-	up[1].port.irq = op->irqs[0];
+	up[1].port.irq = op->archdata.irqs[0];
 	up[1].port.uartclk = ZS_CLOCK;
 	up[1].port.fifosize = 1;
 	up[1].port.ops = &sunzilog_pops;
@@ -1492,12 +1492,12 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
 		       "is a %s\n",
 		       dev_name(&op->dev),
 		       (unsigned long long) up[0].port.mapbase,
-		       op->irqs[0], sunzilog_type(&up[0].port));
+		       op->archdata.irqs[0], sunzilog_type(&up[0].port));
 		printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
 		       "is a %s\n",
 		       dev_name(&op->dev),
 		       (unsigned long long) up[1].port.mapbase,
-		       op->irqs[0], sunzilog_type(&up[1].port));
+		       op->archdata.irqs[0], sunzilog_type(&up[1].port));
 		kbm_inst++;
 	}
 
@@ -1576,7 +1576,7 @@ static int __init sunzilog_init(void)
 			goto out_free_tables;
 	}
 
-	err = of_register_driver(&zs_driver, &of_bus_type);
+	err = of_register_platform_driver(&zs_driver);
 	if (err)
 		goto out_unregister_uart;
 
@@ -1604,7 +1604,7 @@ out:
 	return err;
 
 out_unregister_driver:
-	of_unregister_driver(&zs_driver);
+	of_unregister_platform_driver(&zs_driver);
 
 out_unregister_uart:
 	if (num_sunzilog) {
@@ -1619,7 +1619,7 @@ out_free_tables:
 
 static void __exit sunzilog_exit(void)
 {
-	of_unregister_driver(&zs_driver);
+	of_unregister_platform_driver(&zs_driver);
 
 	if (zilog_irq != -1) {
 		struct uart_sunzilog_port *up = sunzilog_irq_chain;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 8acccd56437..caf085d3a76 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -21,6 +21,7 @@
 #include <asm/io.h>
 #if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 
diff --git a/drivers/spi/mpc512x_psc_spi.c b/drivers/spi/mpc512x_psc_spi.c
index 2534b1ec3ed..10baac3f8ea 100644
--- a/drivers/spi/mpc512x_psc_spi.c
+++ b/drivers/spi/mpc512x_psc_spi.c
@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/workqueue.h>
 #include <linux/completion.h>
@@ -440,6 +441,7 @@ static int __init mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	master->setup = mpc512x_psc_spi_setup;
 	master->transfer = mpc512x_psc_spi_transfer;
 	master->cleanup = mpc512x_psc_spi_cleanup;
+	master->dev.of_node = dev->of_node;
 
 	tempp = ioremap(regaddr, size);
 	if (!tempp) {
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 7104cb739da..66d170147dc 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -16,8 +16,8 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/interrupt.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/of_spi.h>
 #include <linux/workqueue.h>
 #include <linux/completion.h>
 #include <linux/io.h>
@@ -398,6 +398,7 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
 	master->setup = mpc52xx_psc_spi_setup;
 	master->transfer = mpc52xx_psc_spi_transfer;
 	master->cleanup = mpc52xx_psc_spi_cleanup;
+	master->dev.of_node = dev->of_node;
 
 	mps->psc = ioremap(regaddr, size);
 	if (!mps->psc) {
@@ -470,7 +471,6 @@ static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
 	const u32 *regaddr_p;
 	u64 regaddr64, size64;
 	s16 id = -1;
-	int rc;
 
 	regaddr_p = of_get_address(op->dev.of_node, 0, &size64, NULL);
 	if (!regaddr_p) {
@@ -491,13 +491,8 @@ static int __init mpc52xx_psc_spi_of_probe(struct of_device *op,
 		id = *psc_nump + 1;
 	}
 
-	rc = mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
+	return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64,
 				irq_of_parse_and_map(op->dev.of_node, 0), id);
-	if (rc == 0)
-		of_register_spi_devices(dev_get_drvdata(&op->dev),
-					op->dev.of_node);
-
-	return rc;
 }
 
 static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op)
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
index b1a76bff775..56136ff00e0 100644
--- a/drivers/spi/mpc52xx_spi.c
+++ b/drivers/spi/mpc52xx_spi.c
@@ -18,7 +18,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
-#include <linux/of_spi.h>
 #include <linux/io.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
@@ -439,6 +438,7 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
 	master->setup = mpc52xx_spi_setup;
 	master->transfer = mpc52xx_spi_transfer;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
+	master->dev.of_node = op->dev.of_node;
 
 	dev_set_drvdata(&op->dev, master);
 
@@ -512,7 +512,6 @@ static int __devinit mpc52xx_spi_probe(struct of_device *op,
 	if (rc)
 		goto err_register;
 
-	of_register_spi_devices(master, op->dev.of_node);
 	dev_info(&ms->master->dev, "registered MPC5200 SPI bus\n");
 
 	return rc;
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b3a1f9259b6..1bb1b88780c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
+#include <linux/of_spi.h>
 
 
 /* SPI bustype and spi_master class are registered after board init code
@@ -540,6 +541,9 @@ int spi_register_master(struct spi_master *master)
 	/* populate children from any spi device tables */
 	scan_boardinfo(master);
 	status = 0;
+
+	/* Register devices from the device tree */
+	of_register_spi_devices(master);
 done:
 	return status;
 }
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 97ab0a81338..aad9ae1b9c6 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -38,7 +38,6 @@
 #include <linux/of_platform.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
-#include <linux/of_spi.h>
 #include <linux/slab.h>
 
 #include <sysdev/fsl_soc.h>
@@ -1009,6 +1008,7 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
 	master->setup = mpc8xxx_spi_setup;
 	master->transfer = mpc8xxx_spi_transfer;
 	master->cleanup = mpc8xxx_spi_cleanup;
+	master->dev.of_node = dev->of_node;
 
 	mpc8xxx_spi = spi_master_get_devdata(master);
 	mpc8xxx_spi->dev = dev;
@@ -1299,8 +1299,6 @@ static int __devinit of_mpc8xxx_spi_probe(struct of_device *ofdev,
 		goto err;
 	}
 
-	of_register_spi_devices(master, np);
-
 	return 0;
 
 err:
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
index d53466a249d..0f5fa7e2a55 100644
--- a/drivers/spi/spi_ppc4xx.c
+++ b/drivers/spi/spi_ppc4xx.c
@@ -407,6 +407,7 @@ static int __init spi_ppc4xx_of_probe(struct of_device *op,
 	master = spi_alloc_master(dev, sizeof *hw);
 	if (master == NULL)
 		return -ENOMEM;
+	master->dev.of_node = np;
 	dev_set_drvdata(dev, master);
 	hw = spi_master_get_devdata(master);
 	hw->master = spi_master_get(master);
@@ -545,7 +546,6 @@ static int __init spi_ppc4xx_of_probe(struct of_device *op,
 	}
 
 	dev_info(dev, "driver initialized\n");
-	of_register_spi_devices(master, np);
 
 	return 0;
 
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 1b47363cb73..80f2db5bcfd 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -390,6 +390,9 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 
 	master->bus_num = bus_num;
 	master->num_chipselect = pdata->num_chipselect;
+#ifdef CONFIG_OF
+	master->dev.of_node = dev->of_node;
+#endif
 
 	xspi->mem = *mem;
 	xspi->irq = irq;
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
index 4654805b08d..f53d3f6b9f6 100644
--- a/drivers/spi/xilinx_spi_of.c
+++ b/drivers/spi/xilinx_spi_of.c
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/of_spi.h>
@@ -80,9 +81,6 @@ static int __devinit xilinx_spi_of_probe(struct of_device *ofdev,
 
 	dev_set_drvdata(&ofdev->dev, master);
 
-	/* Add any subnodes on the SPI bus */
-	of_register_spi_devices(master, ofdev->dev.of_node);
-
 	return 0;
 }
 
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 7cee7f4eb60..7892ac16352 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -20,7 +20,6 @@
 #include <linux/mmc/sdio_func.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index e72f4046a5e..526682d68de 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -13,7 +13,6 @@
 #include <linux/io.h>
 #include <linux/etherdevice.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
@@ -72,14 +71,9 @@
 /* Write to a PCMCIA configuration register. */
 static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
 {
-	conf_reg_t reg;
 	int res;
 
-	memset(&reg, 0, sizeof(reg));
-	reg.Offset = offset;
-	reg.Action = CS_WRITE;
-	reg.Value = value;
-	res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+	res = pcmcia_write_config_byte(bus->host_pcmcia, offset, value);
 	if (unlikely(res != 0))
 		return -EBUSY;
 
@@ -89,16 +83,11 @@ static int ssb_pcmcia_cfg_write(struct ssb_bus *bus, u8 offset, u8 value)
 /* Read from a PCMCIA configuration register. */
 static int ssb_pcmcia_cfg_read(struct ssb_bus *bus, u8 offset, u8 *value)
 {
-	conf_reg_t reg;
 	int res;
 
-	memset(&reg, 0, sizeof(reg));
-	reg.Offset = offset;
-	reg.Action = CS_READ;
-	res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
+	res = pcmcia_read_config_byte(bus->host_pcmcia, offset, value);
 	if (unlikely(res != 0))
 		return -EBUSY;
-	*value = reg.Value;
 
 	return 0;
 }
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index 0d6c0280eb3..9738cad4ba1 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -17,7 +17,6 @@
 #include <linux/pci.h>
 #include <linux/io.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 0e4122ed1b3..4a7a7a7f11b 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -97,6 +97,8 @@ source "drivers/staging/octeon/Kconfig"
 
 source "drivers/staging/serqt_usb2/Kconfig"
 
+source "drivers/staging/spectra/Kconfig"
+
 source "drivers/staging/quatech_usb2/Kconfig"
 
 source "drivers/staging/vt6655/Kconfig"
@@ -115,7 +117,7 @@ source "drivers/staging/sep/Kconfig"
 
 source "drivers/staging/iio/Kconfig"
 
-source "drivers/staging/ramzswap/Kconfig"
+source "drivers/staging/zram/Kconfig"
 
 source "drivers/staging/wlags49_h2/Kconfig"
 
@@ -127,8 +129,6 @@ source "drivers/staging/samsung-laptop/Kconfig"
 
 source "drivers/staging/sm7xx/Kconfig"
 
-source "drivers/staging/dt3155/Kconfig"
-
 source "drivers/staging/dt3155v4l/Kconfig"
 
 source "drivers/staging/crystalhd/Kconfig"
@@ -147,5 +147,13 @@ source "drivers/staging/msm/Kconfig"
 
 source "drivers/staging/lirc/Kconfig"
 
+source "drivers/staging/easycap/Kconfig"
+
+source "drivers/staging/solo6x10/Kconfig"
+
+source "drivers/staging/tidspbridge/Kconfig"
+
+source "drivers/staging/quickstart/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ecfb0bb990b..ca5c03eb3ce 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_R8187SE)		+= rtl8187se/
 obj-$(CONFIG_RTL8192SU)		+= rtl8192su/
 obj-$(CONFIG_RTL8192U)		+= rtl8192u/
 obj-$(CONFIG_RTL8192E)		+= rtl8192e/
+obj-$(CONFIG_SPECTRA)		+= spectra/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_DREAM)		+= dream/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
@@ -39,13 +40,12 @@ obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
-obj-$(CONFIG_RAMZSWAP)		+= ramzswap/
+obj-$(CONFIG_ZRAM)		+= zram/
 obj-$(CONFIG_WLAGS49_H2)	+= wlags49_h2/
 obj-$(CONFIG_WLAGS49_H25)	+= wlags49_h25/
 obj-$(CONFIG_BATMAN_ADV)	+= batman-adv/
 obj-$(CONFIG_SAMSUNG_LAPTOP)	+= samsung-laptop/
 obj-$(CONFIG_FB_SM7XX)		+= sm7xx/
-obj-$(CONFIG_DT3155)		+= dt3155/
 obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/
 obj-$(CONFIG_CRYSTALHD)		+= crystalhd/
 obj-$(CONFIG_CXT1E1)		+= cxt1e1/
@@ -54,3 +54,7 @@ obj-$(CONFIG_ADIS16255)		+= adis16255/
 obj-$(CONFIG_FB_XGI)		+= xgifb/
 obj-$(CONFIG_TOUCHSCREEN_MRSTOUCH)	+= mrst-touchscreen/
 obj-$(CONFIG_MSM_STAGING)	+= msm/
+obj-$(CONFIG_EASYCAP)		+= easycap/
+obj-$(CONFIG_SOLO6X10)		+= solo6x10/
+obj-$(CONFIG_TIDSPBRIDGE)	+= tidspbridge/
+obj-$(CONFIG_ACPI_QUICKSTART)	+= quickstart/
diff --git a/drivers/staging/adis16255/adis16255.c b/drivers/staging/adis16255/adis16255.c
index 55d66e290f7..c3e6a4d5f33 100644
--- a/drivers/staging/adis16255/adis16255.c
+++ b/drivers/staging/adis16255/adis16255.c
@@ -303,7 +303,7 @@ static int spi_adis16255_bringup(struct spi_adis16255_data *spiadis)
 	if (status != 0)
 		goto err;
 	if (value != 0x0800) {
-		dev_warn(&spiadis->spi->dev, "Scale factor is none default"
+		dev_warn(&spiadis->spi->dev, "Scale factor is none default "
 				"value (%.4x)\n", value);
 	}
 
@@ -338,7 +338,7 @@ static int spi_adis16255_bringup(struct spi_adis16255_data *spiadis)
 			status = -ENODEV;
 			goto err;
 		} else if (value & 0x3)	{
-			dev_warn(&spiadis->spi->dev, "Sensor voltage"
+			dev_warn(&spiadis->spi->dev, "Sensor voltage "
 						"out of range.\n");
 			status = -ENODEV;
 			goto err;
diff --git a/drivers/staging/batman-adv/CHANGELOG b/drivers/staging/batman-adv/CHANGELOG
index c8f9d9e06bb..86450b4f7d7 100644
--- a/drivers/staging/batman-adv/CHANGELOG
+++ b/drivers/staging/batman-adv/CHANGELOG
@@ -1,3 +1,15 @@
+batman-adv 2010.0.0:
+
+* support latest kernels (2.6.21 - 2.6.35)
+* further code refactoring and cleaning for coding style
+* move from procfs based configuration to sysfs
+* reorganized sequence number handling
+* limit queue lengths for batman and broadcast packets
+* many bugs (endless loop and rogue packets on shutdown, wrong tcpdump output,
+  missing frees in error situations, sleeps in atomic contexts) squashed
+
+ -- Fri, 18 Jun 2010 21:34:26 +0200
+
 batman-adv 0.2.1:
 
 * support latest kernels (2.6.20 - 2.6.33)
diff --git a/drivers/staging/batman-adv/Kconfig b/drivers/staging/batman-adv/Kconfig
index 1e7e0a8dbc8..8553f351745 100644
--- a/drivers/staging/batman-adv/Kconfig
+++ b/drivers/staging/batman-adv/Kconfig
@@ -4,7 +4,7 @@
 
 config BATMAN_ADV
 	tristate "B.A.T.M.A.N. Advanced Meshing Protocol"
-	depends on PROC_FS && NET
+	depends on NET
         default n
 	---help---
 
diff --git a/drivers/staging/batman-adv/Makefile b/drivers/staging/batman-adv/Makefile
index f25068c0fae..e9817b5a614 100644
--- a/drivers/staging/batman-adv/Makefile
+++ b/drivers/staging/batman-adv/Makefile
@@ -18,5 +18,5 @@
 # 02110-1301, USA
 #
 
-obj-m += batman-adv.o
-batman-adv-objs := main.o send.o routing.o soft-interface.o device.o translation-table.o bitarray.o hash.o ring_buffer.o vis.o hard-interface.o aggregation.o originator.o bat_sysfs.o
+obj-$(CONFIG_BATMAN_ADV) += batman-adv.o
+batman-adv-objs := main.o bat_debugfs.o bat_sysfs.o send.o routing.o soft-interface.o icmp_socket.o translation-table.o bitarray.o hash.o ring_buffer.o vis.o hard-interface.o aggregation.o originator.o
diff --git a/drivers/staging/batman-adv/README b/drivers/staging/batman-adv/README
index 14244a2c4e4..7192b7fa218 100644
--- a/drivers/staging/batman-adv/README
+++ b/drivers/staging/batman-adv/README
@@ -1,4 +1,4 @@
-[state: 03-05-2010]
+[state: 12-06-2010]
 
 BATMAN-ADV
 ----------
diff --git a/drivers/staging/batman-adv/TODO b/drivers/staging/batman-adv/TODO
index 518db7fd41b..9c5aea20be1 100644
--- a/drivers/staging/batman-adv/TODO
+++ b/drivers/staging/batman-adv/TODO
@@ -1,6 +1,9 @@
-Request a review.
-Process the comments from the review.
-Move into mainline proper.
+ * Use hweight* for hamming weight calculation
+ * Save/cache packets direktly as skb instead of using a normal memory region
+   and copying it in a skb using send_raw_packet and similar functions
+ * Request a new review
+ * Process the comments from the review
+ * Move into mainline proper
 
 Please send all patches to:
 	Marek Lindner <lindner_marek@yahoo.de>
diff --git a/drivers/staging/batman-adv/aggregation.c b/drivers/staging/batman-adv/aggregation.c
index ce8b8a6e5ae..9862d16bbdc 100644
--- a/drivers/staging/batman-adv/aggregation.c
+++ b/drivers/staging/batman-adv/aggregation.c
@@ -106,11 +106,14 @@ static void new_aggregated_packet(unsigned char *packet_buff,
 {
 	struct forw_packet *forw_packet_aggr;
 	unsigned long flags;
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 
 	/* own packet should always be scheduled */
 	if (!own_packet) {
 		if (!atomic_dec_not_zero(&batman_queue_left)) {
-			bat_dbg(DBG_BATMAN, "batman packet queue full\n");
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"batman packet queue full\n");
 			return;
 		}
 	}
@@ -252,9 +255,9 @@ void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
 	while (aggregated_packet(buff_pos, packet_len,
 				 batman_packet->num_hna)) {
 
-		/* network to host order for our 16bit seqno, and the
+		/* network to host order for our 32bit seqno, and the
 		   orig_interval. */
-		batman_packet->seqno = ntohs(batman_packet->seqno);
+		batman_packet->seqno = ntohl(batman_packet->seqno);
 
 		hna_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
 		receive_bat_packet(ethhdr, batman_packet,
diff --git a/drivers/staging/batman-adv/aggregation.h b/drivers/staging/batman-adv/aggregation.h
index 84401ca24c3..71a91b3da91 100644
--- a/drivers/staging/batman-adv/aggregation.h
+++ b/drivers/staging/batman-adv/aggregation.h
@@ -19,6 +19,9 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_AGGREGATION_H_
+#define _NET_BATMAN_ADV_AGGREGATION_H_
+
 #include "main.h"
 
 /* is there another aggregated packet here? */
@@ -36,3 +39,5 @@ void add_bat_packet_to_list(struct bat_priv *bat_priv,
 			    unsigned long send_time);
 void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
 			     int packet_len, struct batman_if *if_incoming);
+
+#endif /* _NET_BATMAN_ADV_AGGREGATION_H_ */
diff --git a/drivers/staging/batman-adv/bat_debugfs.c b/drivers/staging/batman-adv/bat_debugfs.c
new file mode 100644
index 00000000000..507da68054c
--- /dev/null
+++ b/drivers/staging/batman-adv/bat_debugfs.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+
+#include <linux/debugfs.h>
+
+#include "bat_debugfs.h"
+#include "translation-table.h"
+#include "originator.h"
+#include "hard-interface.h"
+#include "vis.h"
+#include "icmp_socket.h"
+
+static struct dentry *bat_debugfs;
+
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+#define LOG_BUFF_MASK (log_buff_len-1)
+#define LOG_BUFF(idx) (debug_log->log_buff[(idx) & LOG_BUFF_MASK])
+
+static int log_buff_len = LOG_BUF_LEN;
+
+static void emit_log_char(struct debug_log *debug_log, char c)
+{
+	LOG_BUFF(debug_log->log_end) = c;
+	debug_log->log_end++;
+
+	if (debug_log->log_end - debug_log->log_start > log_buff_len)
+		debug_log->log_start = debug_log->log_end - log_buff_len;
+}
+
+static int fdebug_log(struct debug_log *debug_log, char *fmt, ...)
+{
+	int printed_len;
+	va_list args;
+	static char debug_log_buf[256];
+	char *p;
+	unsigned long flags;
+
+	if (!debug_log)
+		return 0;
+
+	spin_lock_irqsave(&debug_log->lock, flags);
+	va_start(args, fmt);
+	printed_len = vscnprintf(debug_log_buf, sizeof(debug_log_buf),
+				 fmt, args);
+	va_end(args);
+
+	for (p = debug_log_buf; *p != 0; p++)
+		emit_log_char(debug_log, *p);
+
+	spin_unlock_irqrestore(&debug_log->lock, flags);
+
+	wake_up(&debug_log->queue_wait);
+
+	return 0;
+}
+
+int debug_log(struct bat_priv *bat_priv, char *fmt, ...)
+{
+	va_list args;
+	char tmp_log_buf[256];
+
+	va_start(args, fmt);
+	vscnprintf(tmp_log_buf, sizeof(tmp_log_buf), fmt, args);
+	fdebug_log(bat_priv->debug_log, "[%10u] %s",
+		   (jiffies / HZ), tmp_log_buf);
+	va_end(args);
+
+	return 0;
+}
+
+static int log_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	inc_module_count();
+	return 0;
+}
+
+static int log_release(struct inode *inode, struct file *file)
+{
+	dec_module_count();
+	return 0;
+}
+
+static ssize_t log_read(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct bat_priv *bat_priv = file->private_data;
+	struct debug_log *debug_log = bat_priv->debug_log;
+	int error, i = 0;
+	char c;
+	unsigned long flags;
+
+	if ((file->f_flags & O_NONBLOCK) &&
+	    !(debug_log->log_end - debug_log->log_start))
+		return -EAGAIN;
+
+	if ((!buf) || (count < 0))
+		return -EINVAL;
+
+	if (count == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, count))
+		return -EFAULT;
+
+	error = wait_event_interruptible(debug_log->queue_wait,
+				(debug_log->log_start - debug_log->log_end));
+
+	if (error)
+		return error;
+
+	spin_lock_irqsave(&debug_log->lock, flags);
+
+	while ((!error) && (i < count) &&
+	       (debug_log->log_start != debug_log->log_end)) {
+		c = LOG_BUFF(debug_log->log_start);
+
+		debug_log->log_start++;
+
+		spin_unlock_irqrestore(&debug_log->lock, flags);
+
+		error = __put_user(c, buf);
+
+		spin_lock_irqsave(&debug_log->lock, flags);
+
+		buf++;
+		i++;
+
+	}
+
+	spin_unlock_irqrestore(&debug_log->lock, flags);
+
+	if (!error)
+		return i;
+
+	return error;
+}
+
+static unsigned int log_poll(struct file *file, poll_table *wait)
+{
+	struct bat_priv *bat_priv = file->private_data;
+	struct debug_log *debug_log = bat_priv->debug_log;
+
+	poll_wait(file, &debug_log->queue_wait, wait);
+
+	if (debug_log->log_end - debug_log->log_start)
+		return POLLIN | POLLRDNORM;
+
+	return 0;
+}
+
+static const struct file_operations log_fops = {
+	.open           = log_open,
+	.release        = log_release,
+	.read           = log_read,
+	.poll           = log_poll,
+};
+
+static int debug_log_setup(struct bat_priv *bat_priv)
+{
+	struct dentry *d;
+
+	if (!bat_priv->debug_dir)
+		goto err;
+
+	bat_priv->debug_log = kzalloc(sizeof(struct debug_log), GFP_ATOMIC);
+	if (!bat_priv->debug_log)
+		goto err;
+
+	spin_lock_init(&bat_priv->debug_log->lock);
+	init_waitqueue_head(&bat_priv->debug_log->queue_wait);
+
+	d = debugfs_create_file("log", S_IFREG | S_IRUSR,
+				bat_priv->debug_dir, bat_priv, &log_fops);
+	if (d)
+		goto err;
+
+	return 0;
+
+err:
+	return 1;
+}
+
+static void debug_log_cleanup(struct bat_priv *bat_priv)
+{
+	kfree(bat_priv->debug_log);
+	bat_priv->debug_log = NULL;
+}
+#else /* CONFIG_BATMAN_ADV_DEBUG */
+static int debug_log_setup(struct bat_priv *bat_priv)
+{
+	bat_priv->debug_log = NULL;
+	return 0;
+}
+
+static void debug_log_cleanup(struct bat_priv *bat_priv)
+{
+	return;
+}
+#endif
+
+static int originators_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, orig_seq_print_text, net_dev);
+}
+
+static int transtable_global_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, hna_global_seq_print_text, net_dev);
+}
+
+static int transtable_local_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, hna_local_seq_print_text, net_dev);
+}
+
+static int vis_data_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, vis_seq_print_text, net_dev);
+}
+
+struct bat_debuginfo {
+	struct attribute attr;
+	const struct file_operations fops;
+};
+
+#define BAT_DEBUGINFO(_name, _mode, _open)	\
+struct bat_debuginfo bat_debuginfo_##_name = {	\
+	.attr = { .name = __stringify(_name),	\
+		  .mode = _mode, },		\
+	.fops = { .owner = THIS_MODULE,		\
+		  .open = _open,		\
+		  .read	= seq_read,		\
+		  .llseek = seq_lseek,		\
+		  .release = single_release,	\
+		}				\
+};
+
+static BAT_DEBUGINFO(originators, S_IRUGO, originators_open);
+static BAT_DEBUGINFO(transtable_global, S_IRUGO, transtable_global_open);
+static BAT_DEBUGINFO(transtable_local, S_IRUGO, transtable_local_open);
+static BAT_DEBUGINFO(vis_data, S_IRUGO, vis_data_open);
+
+static struct bat_debuginfo *mesh_debuginfos[] = {
+	&bat_debuginfo_originators,
+	&bat_debuginfo_transtable_global,
+	&bat_debuginfo_transtable_local,
+	&bat_debuginfo_vis_data,
+	NULL,
+};
+
+void debugfs_init(void)
+{
+	bat_debugfs = debugfs_create_dir(DEBUGFS_BAT_SUBDIR, NULL);
+	if (bat_debugfs == ERR_PTR(-ENODEV))
+		bat_debugfs = NULL;
+}
+
+void debugfs_destroy(void)
+{
+	if (bat_debugfs) {
+		debugfs_remove_recursive(bat_debugfs);
+		bat_debugfs = NULL;
+	}
+}
+
+int debugfs_add_meshif(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct bat_debuginfo **bat_debug;
+	struct dentry *file;
+
+	if (!bat_debugfs)
+		goto out;
+
+	bat_priv->debug_dir = debugfs_create_dir(dev->name, bat_debugfs);
+	if (!bat_priv->debug_dir)
+		goto out;
+
+	bat_socket_setup(bat_priv);
+	debug_log_setup(bat_priv);
+
+	for (bat_debug = mesh_debuginfos; *bat_debug; ++bat_debug) {
+		file = debugfs_create_file(((*bat_debug)->attr).name,
+					  S_IFREG | ((*bat_debug)->attr).mode,
+					  bat_priv->debug_dir,
+					  dev, &(*bat_debug)->fops);
+		if (!file) {
+			bat_err(dev, "Can't add debugfs file: %s/%s\n",
+				dev->name, ((*bat_debug)->attr).name);
+			goto rem_attr;
+		}
+	}
+
+	return 0;
+rem_attr:
+	debugfs_remove_recursive(bat_priv->debug_dir);
+	bat_priv->debug_dir = NULL;
+out:
+#ifdef CONFIG_DEBUG_FS
+	return -ENOMEM;
+#else
+	return 0;
+#endif /* CONFIG_DEBUG_FS */
+}
+
+void debugfs_del_meshif(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+
+	debug_log_cleanup(bat_priv);
+
+	if (bat_debugfs) {
+		debugfs_remove_recursive(bat_priv->debug_dir);
+		bat_priv->debug_dir = NULL;
+	}
+}
diff --git a/drivers/staging/batman-adv/bat_debugfs.h b/drivers/staging/batman-adv/bat_debugfs.h
new file mode 100644
index 00000000000..72df532b7d5
--- /dev/null
+++ b/drivers/staging/batman-adv/bat_debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+
+#ifndef _NET_BATMAN_ADV_DEBUGFS_H_
+#define _NET_BATMAN_ADV_DEBUGFS_H_
+
+#define DEBUGFS_BAT_SUBDIR "batman_adv"
+
+void debugfs_init(void);
+void debugfs_destroy(void);
+int debugfs_add_meshif(struct net_device *dev);
+void debugfs_del_meshif(struct net_device *dev);
+
+#endif /* _NET_BATMAN_ADV_DEBUGFS_H_ */
diff --git a/drivers/staging/batman-adv/bat_sysfs.c b/drivers/staging/batman-adv/bat_sysfs.c
index 212bc21e6d6..b4a8d5eb64f 100644
--- a/drivers/staging/batman-adv/bat_sysfs.c
+++ b/drivers/staging/batman-adv/bat_sysfs.c
@@ -28,22 +28,6 @@
 
 #define to_dev(obj)     container_of(obj, struct device, kobj)
 
-struct bat_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *kobj, struct attribute *attr,
-			char *buf);
-	ssize_t (*store)(struct kobject *kobj, struct attribute *attr,
-			 char *buf, size_t count);
-};
-
-struct hardif_attribute {
-	struct attribute attr;
-	ssize_t (*show)(struct kobject *kobj, struct attribute *attr,
-			char *buf);
-	ssize_t (*store)(struct kobject *kobj, struct attribute *attr,
-			 char *buf, size_t count);
-};
-
 #define BAT_ATTR(_name, _mode, _show, _store)	\
 struct bat_attribute bat_attr_##_name = {	\
 	.attr = {.name = __stringify(_name),	\
@@ -52,34 +36,18 @@ struct bat_attribute bat_attr_##_name = {	\
 	.store  = _store,			\
 };
 
-#define BAT_BIN_ATTR(_name, _mode, _read, _write)	\
-struct bin_attribute bat_attr_##_name = {		\
-	.attr = { .name = __stringify(_name),		\
-		  .mode = _mode, },			\
-	.read = _read,					\
-	.write = _write,				\
-};
-
-#define HARDIF_ATTR(_name, _mode, _show, _store)	\
-struct hardif_attribute hardif_attr_##_name = {		\
-	.attr = {.name = __stringify(_name),		\
-		 .mode = _mode },			\
-	.show   = _show,				\
-	.store  = _store,				\
-};
-
-static ssize_t show_aggr_ogm(struct kobject *kobj, struct attribute *attr,
+static ssize_t show_aggr_ogms(struct kobject *kobj, struct attribute *attr,
 			     char *buff)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
 	int aggr_status = atomic_read(&bat_priv->aggregation_enabled);
 
-	return sprintf(buff, "status: %s\ncommands: enable, disable, 0, 1\n",
+	return sprintf(buff, "%s\n",
 		       aggr_status == 0 ? "disabled" : "enabled");
 }
 
-static ssize_t store_aggr_ogm(struct kobject *kobj, struct attribute *attr,
+static ssize_t store_aggr_ogms(struct kobject *kobj, struct attribute *attr,
 			      char *buff, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
@@ -99,23 +67,73 @@ static ssize_t store_aggr_ogm(struct kobject *kobj, struct attribute *attr,
 		if (buff[count - 1] == '\n')
 			buff[count - 1] = '\0';
 
-		printk(KERN_INFO "batman-adv:Invalid parameter for 'aggregate OGM' setting on mesh %s received: %s\n",
-		       net_dev->name, buff);
+		bat_info(net_dev,
+			 "Invalid parameter for 'aggregate OGM' setting"
+			 "received: %s\n", buff);
 		return -EINVAL;
 	}
 
 	if (atomic_read(&bat_priv->aggregation_enabled) == aggr_tmp)
 		return count;
 
-	printk(KERN_INFO "batman-adv:Changing aggregation from: %s to: %s on mesh: %s\n",
-	       atomic_read(&bat_priv->aggregation_enabled) == 1 ?
-	       "enabled" : "disabled", aggr_tmp == 1 ? "enabled" : "disabled",
-	       net_dev->name);
+	bat_info(net_dev, "Changing aggregation from: %s to: %s\n",
+		 atomic_read(&bat_priv->aggregation_enabled) == 1 ?
+		 "enabled" : "disabled", aggr_tmp == 1 ? "enabled" :
+		 "disabled");
 
 	atomic_set(&bat_priv->aggregation_enabled, (unsigned)aggr_tmp);
 	return count;
 }
 
+static ssize_t show_bond(struct kobject *kobj, struct attribute *attr,
+			     char *buff)
+{
+	struct device *dev = to_dev(kobj->parent);
+	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
+	int bond_status = atomic_read(&bat_priv->bonding_enabled);
+
+	return sprintf(buff, "%s\n",
+		       bond_status == 0 ? "disabled" : "enabled");
+}
+
+static ssize_t store_bond(struct kobject *kobj, struct attribute *attr,
+			  char *buff, size_t count)
+{
+	struct device *dev = to_dev(kobj->parent);
+	struct net_device *net_dev = to_net_dev(dev);
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	int bonding_enabled_tmp = -1;
+
+	if (((count == 2) && (buff[0] == '1')) ||
+	    (strncmp(buff, "enable", 6) == 0))
+		bonding_enabled_tmp = 1;
+
+	if (((count == 2) && (buff[0] == '0')) ||
+	    (strncmp(buff, "disable", 7) == 0))
+		bonding_enabled_tmp = 0;
+
+	if (bonding_enabled_tmp < 0) {
+		if (buff[count - 1] == '\n')
+			buff[count - 1] = '\0';
+
+		bat_err(net_dev,
+			"Invalid parameter for 'bonding' setting received: "
+			"%s\n", buff);
+		return -EINVAL;
+	}
+
+	if (atomic_read(&bat_priv->bonding_enabled) == bonding_enabled_tmp)
+		return count;
+
+	bat_info(net_dev, "Changing bonding from: %s to: %s\n",
+		 atomic_read(&bat_priv->bonding_enabled) == 1 ?
+		 "enabled" : "disabled",
+		 bonding_enabled_tmp == 1 ? "enabled" : "disabled");
+
+	atomic_set(&bat_priv->bonding_enabled, (unsigned)bonding_enabled_tmp);
+	return count;
+}
+
 static ssize_t show_vis_mode(struct kobject *kobj, struct attribute *attr,
 			     char *buff)
 {
@@ -123,10 +141,9 @@ static ssize_t show_vis_mode(struct kobject *kobj, struct attribute *attr,
 	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
 	int vis_mode = atomic_read(&bat_priv->vis_mode);
 
-	return sprintf(buff, "status: %s\ncommands: client, server, %d, %d\n",
+	return sprintf(buff, "%s\n",
 		       vis_mode == VIS_TYPE_CLIENT_UPDATE ?
-							"client" : "server",
-		       VIS_TYPE_SERVER_SYNC, VIS_TYPE_CLIENT_UPDATE);
+							"client" : "server");
 }
 
 static ssize_t store_vis_mode(struct kobject *kobj, struct attribute *attr,
@@ -141,7 +158,8 @@ static ssize_t store_vis_mode(struct kobject *kobj, struct attribute *attr,
 	ret = strict_strtoul(buff, 10, &val);
 
 	if (((count == 2) && (!ret) && (val == VIS_TYPE_CLIENT_UPDATE)) ||
-	    (strncmp(buff, "client", 6) == 0))
+	    (strncmp(buff, "client", 6) == 0) ||
+	    (strncmp(buff, "off", 3) == 0))
 		vis_mode_tmp = VIS_TYPE_CLIENT_UPDATE;
 
 	if (((count == 2) && (!ret) && (val == VIS_TYPE_SERVER_SYNC)) ||
@@ -152,18 +170,19 @@ static ssize_t store_vis_mode(struct kobject *kobj, struct attribute *attr,
 		if (buff[count - 1] == '\n')
 			buff[count - 1] = '\0';
 
-		printk(KERN_INFO "batman-adv:Invalid parameter for 'vis mode' setting on mesh %s received: %s\n",
-		       net_dev->name, buff);
+		bat_info(net_dev,
+			 "Invalid parameter for 'vis mode' setting received: "
+			 "%s\n", buff);
 		return -EINVAL;
 	}
 
 	if (atomic_read(&bat_priv->vis_mode) == vis_mode_tmp)
 		return count;
 
-	printk(KERN_INFO "batman-adv:Changing vis mode from: %s to: %s on mesh: %s\n",
-	       atomic_read(&bat_priv->vis_mode) == VIS_TYPE_CLIENT_UPDATE ?
-	       "client" : "server", vis_mode_tmp == VIS_TYPE_CLIENT_UPDATE ?
-	       "client" : "server", net_dev->name);
+	bat_info(net_dev, "Changing vis mode from: %s to: %s\n",
+		 atomic_read(&bat_priv->vis_mode) == VIS_TYPE_CLIENT_UPDATE ?
+		 "client" : "server", vis_mode_tmp == VIS_TYPE_CLIENT_UPDATE ?
+		 "client" : "server");
 
 	atomic_set(&bat_priv->vis_mode, (unsigned)vis_mode_tmp);
 	return count;
@@ -175,7 +194,7 @@ static ssize_t show_orig_interval(struct kobject *kobj, struct attribute *attr,
 	struct device *dev = to_dev(kobj->parent);
 	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
 
-	return sprintf(buff, "status: %i\n",
+	return sprintf(buff, "%i\n",
 		       atomic_read(&bat_priv->orig_interval));
 }
 
@@ -190,91 +209,87 @@ static ssize_t store_orig_interval(struct kobject *kobj, struct attribute *attr,
 
 	ret = strict_strtoul(buff, 10, &orig_interval_tmp);
 	if (ret) {
-		printk(KERN_INFO "batman-adv:Invalid parameter for 'orig_interval' setting on mesh %s received: %s\n",
-		       net_dev->name, buff);
+		bat_info(net_dev, "Invalid parameter for 'orig_interval' "
+			 "setting received: %s\n", buff);
 		return -EINVAL;
 	}
 
-	if (orig_interval_tmp <= JITTER * 2) {
-		printk(KERN_INFO "batman-adv:New originator interval too small: %li (min: %i)\n",
-		       orig_interval_tmp, JITTER * 2);
+	if (orig_interval_tmp < JITTER * 2) {
+		bat_info(net_dev, "New originator interval too small: %li "
+			 "(min: %i)\n", orig_interval_tmp, JITTER * 2);
 		return -EINVAL;
 	}
 
 	if (atomic_read(&bat_priv->orig_interval) == orig_interval_tmp)
 		return count;
 
-	printk(KERN_INFO "batman-adv:Changing originator interval from: %i to: %li on mesh: %s\n",
-	       atomic_read(&bat_priv->orig_interval),
-	       orig_interval_tmp, net_dev->name);
+	bat_info(net_dev, "Changing originator interval from: %i to: %li\n",
+		 atomic_read(&bat_priv->orig_interval),
+		 orig_interval_tmp);
 
 	atomic_set(&bat_priv->orig_interval, orig_interval_tmp);
 	return count;
 }
 
-static BAT_ATTR(aggregate_ogm, S_IRUGO | S_IWUSR,
-		show_aggr_ogm, store_aggr_ogm);
-static BAT_ATTR(vis_mode, S_IRUGO | S_IWUSR, show_vis_mode, store_vis_mode);
-static BAT_ATTR(orig_interval, S_IRUGO | S_IWUSR,
-		show_orig_interval, store_orig_interval);
-
-static struct bat_attribute *mesh_attrs[] = {
-	&bat_attr_aggregate_ogm,
-	&bat_attr_vis_mode,
-	&bat_attr_orig_interval,
-	NULL,
-};
-
-static ssize_t transtable_local_read(struct file *filp, struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buff, loff_t off, size_t count)
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+static ssize_t show_log_level(struct kobject *kobj, struct attribute *attr,
+			     char *buff)
 {
 	struct device *dev = to_dev(kobj->parent);
-	struct net_device *net_dev = to_net_dev(dev);
+	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
+	int log_level = atomic_read(&bat_priv->log_level);
 
-	return hna_local_fill_buffer_text(net_dev, buff, count, off);
+	return sprintf(buff, "%d\n", log_level);
 }
 
-static ssize_t transtable_global_read(struct file *filp, struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buff, loff_t off, size_t count)
+static ssize_t store_log_level(struct kobject *kobj, struct attribute *attr,
+			      char *buff, size_t count)
 {
 	struct device *dev = to_dev(kobj->parent);
 	struct net_device *net_dev = to_net_dev(dev);
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	unsigned long log_level_tmp;
+	int ret;
 
-	return hna_global_fill_buffer_text(net_dev, buff, count, off);
-}
-
-static ssize_t originators_read(struct file *filp, struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buff, loff_t off, size_t count)
-{
-	struct device *dev = to_dev(kobj->parent);
-	struct net_device *net_dev = to_net_dev(dev);
+	ret = strict_strtoul(buff, 10, &log_level_tmp);
+	if (ret) {
+		bat_info(net_dev, "Invalid parameter for 'log_level' "
+			 "setting received: %s\n", buff);
+		return -EINVAL;
+	}
 
-	return orig_fill_buffer_text(net_dev, buff, count, off);
-}
+	if (log_level_tmp > 3) {
+		bat_info(net_dev, "New log level too big: %li "
+			 "(max: %i)\n", log_level_tmp, 3);
+		return -EINVAL;
+	}
 
-static ssize_t vis_data_read(struct file *filp, struct kobject *kobj,
-				  struct bin_attribute *bin_attr,
-				  char *buff, loff_t off, size_t count)
-{
-	struct device *dev = to_dev(kobj->parent);
-	struct net_device *net_dev = to_net_dev(dev);
+	if (atomic_read(&bat_priv->log_level) == log_level_tmp)
+		return count;
 
-	return vis_fill_buffer_text(net_dev, buff, count, off);
+	atomic_set(&bat_priv->log_level, (unsigned)log_level_tmp);
+	return count;
 }
+#endif
 
-static BAT_BIN_ATTR(transtable_local, S_IRUGO, transtable_local_read, NULL);
-static BAT_BIN_ATTR(transtable_global, S_IRUGO, transtable_global_read, NULL);
-static BAT_BIN_ATTR(originators, S_IRUGO, originators_read, NULL);
-static BAT_BIN_ATTR(vis_data, S_IRUGO, vis_data_read, NULL);
+static BAT_ATTR(aggregated_ogms, S_IRUGO | S_IWUSR,
+		show_aggr_ogms, store_aggr_ogms);
+static BAT_ATTR(bonding, S_IRUGO | S_IWUSR, show_bond, store_bond);
+static BAT_ATTR(vis_mode, S_IRUGO | S_IWUSR, show_vis_mode, store_vis_mode);
+static BAT_ATTR(orig_interval, S_IRUGO | S_IWUSR,
+		show_orig_interval, store_orig_interval);
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+static BAT_ATTR(log_level, S_IRUGO | S_IWUSR, show_log_level, store_log_level);
+#endif
 
-static struct bin_attribute *mesh_bin_attrs[] = {
-	&bat_attr_transtable_local,
-	&bat_attr_transtable_global,
-	&bat_attr_originators,
-	&bat_attr_vis_data,
+static struct bat_attribute *mesh_attrs[] = {
+	&bat_attr_aggregated_ogms,
+	&bat_attr_bonding,
+	&bat_attr_vis_mode,
+	&bat_attr_orig_interval,
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	&bat_attr_log_level,
+#endif
 	NULL,
 };
 
@@ -283,22 +298,24 @@ int sysfs_add_meshif(struct net_device *dev)
 	struct kobject *batif_kobject = &dev->dev.kobj;
 	struct bat_priv *bat_priv = netdev_priv(dev);
 	struct bat_attribute **bat_attr;
-	struct bin_attribute **bin_attr;
 	int err;
 
 	/* FIXME: should be done in the general mesh setup
 		  routine as soon as we have it */
 	atomic_set(&bat_priv->aggregation_enabled, 1);
+	atomic_set(&bat_priv->bonding_enabled, 0);
 	atomic_set(&bat_priv->vis_mode, VIS_TYPE_CLIENT_UPDATE);
 	atomic_set(&bat_priv->orig_interval, 1000);
+	atomic_set(&bat_priv->log_level, 0);
+
 	bat_priv->primary_if = NULL;
 	bat_priv->num_ifaces = 0;
 
 	bat_priv->mesh_obj = kobject_create_and_add(SYSFS_IF_MESH_SUBDIR,
 						    batif_kobject);
 	if (!bat_priv->mesh_obj) {
-		printk(KERN_ERR "batman-adv:Can't add sysfs directory: %s/%s\n",
-		       dev->name, SYSFS_IF_MESH_SUBDIR);
+		bat_err(dev, "Can't add sysfs directory: %s/%s\n", dev->name,
+			SYSFS_IF_MESH_SUBDIR);
 		goto out;
 	}
 
@@ -306,28 +323,15 @@ int sysfs_add_meshif(struct net_device *dev)
 		err = sysfs_create_file(bat_priv->mesh_obj,
 					&((*bat_attr)->attr));
 		if (err) {
-			printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n",
-			       dev->name, SYSFS_IF_MESH_SUBDIR,
-			       ((*bat_attr)->attr).name);
+			bat_err(dev, "Can't add sysfs file: %s/%s/%s\n",
+				dev->name, SYSFS_IF_MESH_SUBDIR,
+				((*bat_attr)->attr).name);
 			goto rem_attr;
 		}
 	}
 
-	for (bin_attr = mesh_bin_attrs; *bin_attr; ++bin_attr) {
-		err = sysfs_create_bin_file(bat_priv->mesh_obj, (*bin_attr));
-		if (err) {
-			printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n",
-			       dev->name, SYSFS_IF_MESH_SUBDIR,
-			       ((*bin_attr)->attr).name);
-			goto rem_bin_attr;
-		}
-	}
-
 	return 0;
 
-rem_bin_attr:
-	for (bin_attr = mesh_bin_attrs; *bin_attr; ++bin_attr)
-		sysfs_remove_bin_file(bat_priv->mesh_obj, (*bin_attr));
 rem_attr:
 	for (bat_attr = mesh_attrs; *bat_attr; ++bat_attr)
 		sysfs_remove_file(bat_priv->mesh_obj, &((*bat_attr)->attr));
@@ -342,10 +346,6 @@ void sysfs_del_meshif(struct net_device *dev)
 {
 	struct bat_priv *bat_priv = netdev_priv(dev);
 	struct bat_attribute **bat_attr;
-	struct bin_attribute **bin_attr;
-
-	for (bin_attr = mesh_bin_attrs; *bin_attr; ++bin_attr)
-		sysfs_remove_bin_file(bat_priv->mesh_obj, (*bin_attr));
 
 	for (bat_attr = mesh_attrs; *bat_attr; ++bat_attr)
 		sysfs_remove_file(bat_priv->mesh_obj, &((*bat_attr)->attr));
@@ -364,7 +364,7 @@ static ssize_t show_mesh_iface(struct kobject *kobj, struct attribute *attr,
 	if (!batman_if)
 		return 0;
 
-	return sprintf(buff, "status: %s\ncommands: none, bat0\n",
+	return sprintf(buff, "%s\n",
 		       batman_if->if_status == IF_NOT_IN_USE ?
 							"none" : "bat0");
 }
@@ -390,8 +390,8 @@ static ssize_t store_mesh_iface(struct kobject *kobj, struct attribute *attr,
 		if (buff[count - 1] == '\n')
 			buff[count - 1] = '\0';
 
-		printk(KERN_ERR "batman-adv:Invalid parameter for 'mesh_iface' setting received: %s\n",
-		       buff);
+		pr_err("Invalid parameter for 'mesh_iface' setting received: "
+		       "%s\n", buff);
 		return -EINVAL;
 	}
 
@@ -433,37 +433,37 @@ static ssize_t show_iface_status(struct kobject *kobj, struct attribute *attr,
 	}
 }
 
-static HARDIF_ATTR(mesh_iface, S_IRUGO | S_IWUSR,
-		   show_mesh_iface, store_mesh_iface);
-static HARDIF_ATTR(iface_status, S_IRUGO, show_iface_status, NULL);
+static BAT_ATTR(mesh_iface, S_IRUGO | S_IWUSR,
+		show_mesh_iface, store_mesh_iface);
+static BAT_ATTR(iface_status, S_IRUGO, show_iface_status, NULL);
 
-static struct hardif_attribute *batman_attrs[] = {
-	&hardif_attr_mesh_iface,
-	&hardif_attr_iface_status,
+static struct bat_attribute *batman_attrs[] = {
+	&bat_attr_mesh_iface,
+	&bat_attr_iface_status,
 	NULL,
 };
 
 int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev)
 {
 	struct kobject *hardif_kobject = &dev->dev.kobj;
-	struct hardif_attribute **hardif_attr;
+	struct bat_attribute **bat_attr;
 	int err;
 
 	*hardif_obj = kobject_create_and_add(SYSFS_IF_BAT_SUBDIR,
 						    hardif_kobject);
 
 	if (!*hardif_obj) {
-		printk(KERN_ERR "batman-adv:Can't add sysfs directory: %s/%s\n",
-		       dev->name, SYSFS_IF_BAT_SUBDIR);
+		bat_err(dev, "Can't add sysfs directory: %s/%s\n", dev->name,
+			SYSFS_IF_BAT_SUBDIR);
 		goto out;
 	}
 
-	for (hardif_attr = batman_attrs; *hardif_attr; ++hardif_attr) {
-		err = sysfs_create_file(*hardif_obj, &((*hardif_attr)->attr));
+	for (bat_attr = batman_attrs; *bat_attr; ++bat_attr) {
+		err = sysfs_create_file(*hardif_obj, &((*bat_attr)->attr));
 		if (err) {
-			printk(KERN_ERR "batman-adv:Can't add sysfs file: %s/%s/%s\n",
-			       dev->name, SYSFS_IF_BAT_SUBDIR,
-			       ((*hardif_attr)->attr).name);
+			bat_err(dev, "Can't add sysfs file: %s/%s/%s\n",
+				dev->name, SYSFS_IF_BAT_SUBDIR,
+				((*bat_attr)->attr).name);
 			goto rem_attr;
 		}
 	}
@@ -471,8 +471,8 @@ int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev)
 	return 0;
 
 rem_attr:
-	for (hardif_attr = batman_attrs; *hardif_attr; ++hardif_attr)
-		sysfs_remove_file(*hardif_obj, &((*hardif_attr)->attr));
+	for (bat_attr = batman_attrs; *bat_attr; ++bat_attr)
+		sysfs_remove_file(*hardif_obj, &((*bat_attr)->attr));
 out:
 	return -ENOMEM;
 }
diff --git a/drivers/staging/batman-adv/bat_sysfs.h b/drivers/staging/batman-adv/bat_sysfs.h
index e1893411871..7f186c007b4 100644
--- a/drivers/staging/batman-adv/bat_sysfs.h
+++ b/drivers/staging/batman-adv/bat_sysfs.h
@@ -20,10 +20,23 @@
  */
 
 
+#ifndef _NET_BATMAN_ADV_SYSFS_H_
+#define _NET_BATMAN_ADV_SYSFS_H_
+
 #define SYSFS_IF_MESH_SUBDIR "mesh"
 #define SYSFS_IF_BAT_SUBDIR "batman_adv"
 
+struct bat_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *kobj, struct attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct kobject *kobj, struct attribute *attr,
+			 char *buf, size_t count);
+};
+
 int sysfs_add_meshif(struct net_device *dev);
 void sysfs_del_meshif(struct net_device *dev);
 int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev);
 void sysfs_del_hardif(struct kobject **hardif_obj);
+
+#endif /* _NET_BATMAN_ADV_SYSFS_H_ */
diff --git a/drivers/staging/batman-adv/bitarray.c b/drivers/staging/batman-adv/bitarray.c
index 2fef6e35f8c..dd4193c99d4 100644
--- a/drivers/staging/batman-adv/bitarray.c
+++ b/drivers/staging/batman-adv/bitarray.c
@@ -24,10 +24,10 @@
 
 /* returns true if the corresponding bit in the given seq_bits indicates true
  * and curr_seqno is within range of last_seqno */
-uint8_t get_bit_status(TYPE_OF_WORD *seq_bits, uint16_t last_seqno,
-		       uint16_t curr_seqno)
+uint8_t get_bit_status(TYPE_OF_WORD *seq_bits, uint32_t last_seqno,
+		       uint32_t curr_seqno)
 {
-	int16_t diff, word_offset, word_num;
+	int32_t diff, word_offset, word_num;
 
 	diff = last_seqno - curr_seqno;
 	if (diff < 0 || diff >= TQ_LOCAL_WINDOW_SIZE) {
@@ -63,7 +63,7 @@ void bit_mark(TYPE_OF_WORD *seq_bits, int32_t n)
 }
 
 /* shift the packet array by n places. */
-void bit_shift(TYPE_OF_WORD *seq_bits, int32_t n)
+static void bit_shift(TYPE_OF_WORD *seq_bits, int32_t n)
 {
 	int32_t word_offset, word_num;
 	int32_t i;
@@ -125,9 +125,12 @@ static void bit_reset_window(TYPE_OF_WORD *seq_bits)
  *  1 if the window was moved (either new or very old)
  *  0 if the window was not moved/shifted.
  */
-char bit_get_packet(TYPE_OF_WORD *seq_bits, int16_t seq_num_diff,
+char bit_get_packet(TYPE_OF_WORD *seq_bits, int32_t seq_num_diff,
 		    int8_t set_mark)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+
 	/* sequence number is slightly older. We already got a sequence number
 	 * higher than this one, so we just mark it. */
 
@@ -152,7 +155,7 @@ char bit_get_packet(TYPE_OF_WORD *seq_bits, int16_t seq_num_diff,
 
 	if ((seq_num_diff >= TQ_LOCAL_WINDOW_SIZE)
 		|| (seq_num_diff < EXPECTED_SEQNO_RANGE)) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"We missed a lot of packets (%i) !\n",
 			seq_num_diff - 1);
 		bit_reset_window(seq_bits);
@@ -169,7 +172,7 @@ char bit_get_packet(TYPE_OF_WORD *seq_bits, int16_t seq_num_diff,
 	if ((seq_num_diff <= -TQ_LOCAL_WINDOW_SIZE)
 		|| (seq_num_diff >= EXPECTED_SEQNO_RANGE)) {
 
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Other host probably restarted!\n");
 
 		bit_reset_window(seq_bits);
diff --git a/drivers/staging/batman-adv/bitarray.h b/drivers/staging/batman-adv/bitarray.h
index 76ad24c9f3d..01897d6962d 100644
--- a/drivers/staging/batman-adv/bitarray.h
+++ b/drivers/staging/batman-adv/bitarray.h
@@ -19,6 +19,8 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_BITARRAY_H_
+#define _NET_BATMAN_ADV_BITARRAY_H_
 
 /* you should choose something big, if you don't want to waste cpu */
 #define TYPE_OF_WORD unsigned long
@@ -26,20 +28,19 @@
 
 /* returns true if the corresponding bit in the given seq_bits indicates true
  * and curr_seqno is within range of last_seqno */
-uint8_t get_bit_status(TYPE_OF_WORD *seq_bits, uint16_t last_seqno,
-					   uint16_t curr_seqno);
+uint8_t get_bit_status(TYPE_OF_WORD *seq_bits, uint32_t last_seqno,
+					   uint32_t curr_seqno);
 
 /* turn corresponding bit on, so we can remember that we got the packet */
 void bit_mark(TYPE_OF_WORD *seq_bits, int32_t n);
 
-/* shift the packet array by n places. */
-void bit_shift(TYPE_OF_WORD *seq_bits, int32_t n);
-
 
 /* receive and process one packet, returns 1 if received seq_num is considered
  * new, 0 if old  */
-char bit_get_packet(TYPE_OF_WORD *seq_bits, int16_t seq_num_diff,
+char bit_get_packet(TYPE_OF_WORD *seq_bits, int32_t seq_num_diff,
 					int8_t set_mark);
 
 /* count the hamming weight, how many good packets did we receive? */
 int  bit_packet_count(TYPE_OF_WORD *seq_bits);
+
+#endif /* _NET_BATMAN_ADV_BITARRAY_H_ */
diff --git a/drivers/staging/batman-adv/device.c b/drivers/staging/batman-adv/device.c
deleted file mode 100644
index 32204b5572d..00000000000
--- a/drivers/staging/batman-adv/device.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
- *
- * Marek Lindner
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA
- *
- */
-
-#include <linux/device.h>
-#include <linux/slab.h>
-#include "main.h"
-#include "device.h"
-#include "send.h"
-#include "types.h"
-#include "hash.h"
-#include "hard-interface.h"
-
-static struct class *batman_class;
-
-static int Major;	/* Major number assigned to our device driver */
-
-static const struct file_operations fops = {
-	.open = bat_device_open,
-	.release = bat_device_release,
-	.read = bat_device_read,
-	.write = bat_device_write,
-	.poll = bat_device_poll,
-};
-
-static struct device_client *device_client_hash[256];
-
-void bat_device_init(void)
-{
-	memset(device_client_hash, 0, sizeof(device_client_hash));
-}
-
-int bat_device_setup(void)
-{
-	int tmp_major;
-
-	if (Major)
-		return 1;
-
-	/* register our device - kernel assigns a free major number */
-	tmp_major = register_chrdev(0, DRIVER_DEVICE, &fops);
-	if (tmp_major < 0) {
-		printk(KERN_ERR "batman-adv:"
-		       "Registering the character device failed with %d\n",
-			  tmp_major);
-		return 0;
-	}
-
-	batman_class = class_create(THIS_MODULE, "batman-adv");
-
-	if (IS_ERR(batman_class)) {
-		printk(KERN_ERR "batman-adv:"
-		       "Could not register class 'batman-adv'\n");
-		return 0;
-	}
-
-	device_create(batman_class, NULL, MKDEV(tmp_major, 0), NULL,
-		      "batman-adv");
-
-	Major = tmp_major;
-	return 1;
-}
-
-void bat_device_destroy(void)
-{
-	if (!Major)
-		return;
-
-	device_destroy(batman_class, MKDEV(Major, 0));
-	class_destroy(batman_class);
-
-	/* Unregister the device */
-	unregister_chrdev(Major, DRIVER_DEVICE);
-
-	Major = 0;
-}
-
-int bat_device_open(struct inode *inode, struct file *file)
-{
-	unsigned int i;
-	struct device_client *device_client;
-
-	device_client = kmalloc(sizeof(struct device_client), GFP_KERNEL);
-
-	if (!device_client)
-		return -ENOMEM;
-
-	for (i = 0; i < ARRAY_SIZE(device_client_hash); i++) {
-		if (!device_client_hash[i]) {
-			device_client_hash[i] = device_client;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(device_client_hash)) {
-		printk(KERN_ERR "batman-adv:"
-		       "Error - can't add another packet client: "
-		       "maximum number of clients reached\n");
-		kfree(device_client);
-		return -EXFULL;
-	}
-
-	INIT_LIST_HEAD(&device_client->queue_list);
-	device_client->queue_len = 0;
-	device_client->index = i;
-	spin_lock_init(&device_client->lock);
-	init_waitqueue_head(&device_client->queue_wait);
-
-	file->private_data = device_client;
-
-	inc_module_count();
-	return 0;
-}
-
-int bat_device_release(struct inode *inode, struct file *file)
-{
-	struct device_client *device_client =
-		(struct device_client *)file->private_data;
-	struct device_packet *device_packet;
-	struct list_head *list_pos, *list_pos_tmp;
-	unsigned long flags;
-
-	spin_lock_irqsave(&device_client->lock, flags);
-
-	/* for all packets in the queue ... */
-	list_for_each_safe(list_pos, list_pos_tmp, &device_client->queue_list) {
-		device_packet = list_entry(list_pos,
-					   struct device_packet, list);
-
-		list_del(list_pos);
-		kfree(device_packet);
-	}
-
-	device_client_hash[device_client->index] = NULL;
-	spin_unlock_irqrestore(&device_client->lock, flags);
-
-	kfree(device_client);
-	dec_module_count();
-
-	return 0;
-}
-
-ssize_t bat_device_read(struct file *file, char __user *buf, size_t count,
-			loff_t *ppos)
-{
-	struct device_client *device_client =
-		(struct device_client *)file->private_data;
-	struct device_packet *device_packet;
-	int error;
-	unsigned long flags;
-
-	if ((file->f_flags & O_NONBLOCK) && (device_client->queue_len == 0))
-		return -EAGAIN;
-
-	if ((!buf) || (count < sizeof(struct icmp_packet)))
-		return -EINVAL;
-
-	if (!access_ok(VERIFY_WRITE, buf, count))
-		return -EFAULT;
-
-	error = wait_event_interruptible(device_client->queue_wait,
-					 device_client->queue_len);
-
-	if (error)
-		return error;
-
-	spin_lock_irqsave(&device_client->lock, flags);
-
-	device_packet = list_first_entry(&device_client->queue_list,
-					 struct device_packet, list);
-	list_del(&device_packet->list);
-	device_client->queue_len--;
-
-	spin_unlock_irqrestore(&device_client->lock, flags);
-
-	error = __copy_to_user(buf, &device_packet->icmp_packet,
-			       sizeof(struct icmp_packet));
-
-	kfree(device_packet);
-
-	if (error)
-		return -EFAULT;
-
-	return sizeof(struct icmp_packet);
-}
-
-ssize_t bat_device_write(struct file *file, const char __user *buff,
-			 size_t len, loff_t *off)
-{
-	struct device_client *device_client =
-		(struct device_client *)file->private_data;
-	struct icmp_packet icmp_packet;
-	struct orig_node *orig_node;
-	struct batman_if *batman_if;
-	uint8_t dstaddr[ETH_ALEN];
-	unsigned long flags;
-
-	if (len < sizeof(struct icmp_packet)) {
-		bat_dbg(DBG_BATMAN, "batman-adv:"
-			"Error - can't send packet from char device: "
-			"invalid packet size\n");
-		return -EINVAL;
-	}
-
-	if (!access_ok(VERIFY_READ, buff, sizeof(struct icmp_packet)))
-		return -EFAULT;
-
-	if (__copy_from_user(&icmp_packet, buff, sizeof(icmp_packet)))
-		return -EFAULT;
-
-	if (icmp_packet.packet_type != BAT_ICMP) {
-		bat_dbg(DBG_BATMAN, "batman-adv:"
-			"Error - can't send packet from char device: "
-			"got bogus packet type (expected: BAT_ICMP)\n");
-		return -EINVAL;
-	}
-
-	if (icmp_packet.msg_type != ECHO_REQUEST) {
-		bat_dbg(DBG_BATMAN, "batman-adv:"
-			"Error - can't send packet from char device: "
-			"got bogus message type (expected: ECHO_REQUEST)\n");
-		return -EINVAL;
-	}
-
-	icmp_packet.uid = device_client->index;
-
-	if (icmp_packet.version != COMPAT_VERSION) {
-		icmp_packet.msg_type = PARAMETER_PROBLEM;
-		icmp_packet.ttl = COMPAT_VERSION;
-		bat_device_add_packet(device_client, &icmp_packet);
-		goto out;
-	}
-
-	if (atomic_read(&module_state) != MODULE_ACTIVE)
-		goto dst_unreach;
-
-	spin_lock_irqsave(&orig_hash_lock, flags);
-	orig_node = ((struct orig_node *)hash_find(orig_hash, icmp_packet.dst));
-
-	if (!orig_node)
-		goto unlock;
-
-	if (!orig_node->router)
-		goto unlock;
-
-	batman_if = orig_node->router->if_incoming;
-	memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
-
-	spin_unlock_irqrestore(&orig_hash_lock, flags);
-
-	if (!batman_if)
-		goto dst_unreach;
-
-	if (batman_if->if_status != IF_ACTIVE)
-		goto dst_unreach;
-
-	memcpy(icmp_packet.orig,
-	       batman_if->net_dev->dev_addr,
-	       ETH_ALEN);
-
-	send_raw_packet((unsigned char *)&icmp_packet,
-			sizeof(struct icmp_packet),
-			batman_if, dstaddr);
-
-	goto out;
-
-unlock:
-	spin_unlock_irqrestore(&orig_hash_lock, flags);
-dst_unreach:
-	icmp_packet.msg_type = DESTINATION_UNREACHABLE;
-	bat_device_add_packet(device_client, &icmp_packet);
-out:
-	return len;
-}
-
-unsigned int bat_device_poll(struct file *file, poll_table *wait)
-{
-	struct device_client *device_client =
-		(struct device_client *)file->private_data;
-
-	poll_wait(file, &device_client->queue_wait, wait);
-
-	if (device_client->queue_len > 0)
-		return POLLIN | POLLRDNORM;
-
-	return 0;
-}
-
-void bat_device_add_packet(struct device_client *device_client,
-			   struct icmp_packet *icmp_packet)
-{
-	struct device_packet *device_packet;
-	unsigned long flags;
-
-	device_packet = kmalloc(sizeof(struct device_packet), GFP_ATOMIC);
-
-	if (!device_packet)
-		return;
-
-	INIT_LIST_HEAD(&device_packet->list);
-	memcpy(&device_packet->icmp_packet, icmp_packet,
-	       sizeof(struct icmp_packet));
-
-	spin_lock_irqsave(&device_client->lock, flags);
-
-	/* while waiting for the lock the device_client could have been
-	 * deleted */
-	if (!device_client_hash[icmp_packet->uid]) {
-		spin_unlock_irqrestore(&device_client->lock, flags);
-		kfree(device_packet);
-		return;
-	}
-
-	list_add_tail(&device_packet->list, &device_client->queue_list);
-	device_client->queue_len++;
-
-	if (device_client->queue_len > 100) {
-		device_packet = list_first_entry(&device_client->queue_list,
-						 struct device_packet, list);
-
-		list_del(&device_packet->list);
-		kfree(device_packet);
-		device_client->queue_len--;
-	}
-
-	spin_unlock_irqrestore(&device_client->lock, flags);
-
-	wake_up(&device_client->queue_wait);
-}
-
-void bat_device_receive_packet(struct icmp_packet *icmp_packet)
-{
-	struct device_client *hash = device_client_hash[icmp_packet->uid];
-
-	if (hash)
-		bat_device_add_packet(hash, icmp_packet);
-}
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index 96c86c87301..92c216a5688 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -30,6 +30,7 @@
 #include "hash.h"
 
 #include <linux/if_arp.h>
+#include <linux/netfilter_bridge.h>
 
 #define MIN(x, y) ((x) < (y) ? (x) : (y))
 
@@ -108,7 +109,7 @@ static void set_primary_if(struct bat_priv *bat_priv,
 	set_main_if_addr(batman_if->net_dev->dev_addr);
 
 	batman_packet = (struct batman_packet *)(batman_if->packet_buff);
-	batman_packet->flags = 0;
+	batman_packet->flags = PRIMARIES_FIRST_HOP;
 	batman_packet->ttl = TTL;
 
 	/***
@@ -149,12 +150,10 @@ static void check_known_mac_addr(uint8_t *addr)
 		if (!compare_orig(batman_if->net_dev->dev_addr, addr))
 			continue;
 
-		printk(KERN_WARNING "batman-adv:"
-		    "The newly added mac address (%pM) already exists on: %s\n",
-		    addr, batman_if->dev);
-		printk(KERN_WARNING "batman-adv:"
-		    "It is strongly recommended to keep mac addresses unique"
-		    "to avoid problems!\n");
+		pr_warning("The newly added mac address (%pM) already exists "
+			   "on: %s\n", addr, batman_if->dev);
+		pr_warning("It is strongly recommended to keep mac addresses "
+			   "unique to avoid problems!\n");
 	}
 	rcu_read_unlock();
 }
@@ -188,7 +187,8 @@ void update_min_mtu(void)
 		soft_device->mtu = min_mtu;
 }
 
-static void hardif_activate_interface(struct bat_priv *bat_priv,
+static void hardif_activate_interface(struct net_device *net_dev,
+				      struct bat_priv *bat_priv,
 				      struct batman_if *batman_if)
 {
 	if (batman_if->if_status != IF_INACTIVE)
@@ -206,8 +206,7 @@ static void hardif_activate_interface(struct bat_priv *bat_priv,
 	if (!bat_priv->primary_if)
 		set_primary_if(bat_priv, batman_if);
 
-	printk(KERN_INFO "batman-adv:Interface activated: %s\n",
-	       batman_if->dev);
+	bat_info(net_dev, "Interface activated: %s\n", batman_if->dev);
 
 	if (atomic_read(&module_state) == MODULE_INACTIVE)
 		activate_module();
@@ -216,7 +215,8 @@ static void hardif_activate_interface(struct bat_priv *bat_priv,
 	return;
 }
 
-static void hardif_deactivate_interface(struct batman_if *batman_if)
+static void hardif_deactivate_interface(struct net_device *net_dev,
+					struct batman_if *batman_if)
 {
 	if ((batman_if->if_status != IF_ACTIVE) &&
 	   (batman_if->if_status != IF_TO_BE_ACTIVATED))
@@ -226,8 +226,7 @@ static void hardif_deactivate_interface(struct batman_if *batman_if)
 
 	batman_if->if_status = IF_INACTIVE;
 
-	printk(KERN_INFO "batman-adv:Interface deactivated: %s\n",
-	       batman_if->dev);
+	bat_info(net_dev, "Interface deactivated: %s\n", batman_if->dev);
 
 	update_min_mtu();
 }
@@ -245,9 +244,8 @@ int hardif_enable_interface(struct batman_if *batman_if)
 	batman_if->packet_buff = kmalloc(batman_if->packet_len, GFP_ATOMIC);
 
 	if (!batman_if->packet_buff) {
-		printk(KERN_ERR "batman-adv:"
-		       "Can't add interface packet (%s): out of memory\n",
-		       batman_if->dev);
+		bat_err(soft_device, "Can't add interface packet (%s): "
+			"out of memory\n", batman_if->dev);
 		goto err;
 	}
 
@@ -265,15 +263,14 @@ int hardif_enable_interface(struct batman_if *batman_if)
 	orig_hash_add_if(batman_if, bat_priv->num_ifaces);
 
 	atomic_set(&batman_if->seqno, 1);
-	printk(KERN_INFO "batman-adv:Adding interface: %s\n", batman_if->dev);
+	bat_info(soft_device, "Adding interface: %s\n", batman_if->dev);
 
 	if (hardif_is_iface_up(batman_if))
-		hardif_activate_interface(bat_priv, batman_if);
+		hardif_activate_interface(soft_device, bat_priv, batman_if);
 	else
-		printk(KERN_ERR "batman-adv:"
-		       "Not using interface %s "
-		       "(retrying later): interface not active\n",
-		       batman_if->dev);
+		bat_err(soft_device, "Not using interface %s "
+			"(retrying later): interface not active\n",
+			batman_if->dev);
 
 	/* begin scheduling originator messages on that interface */
 	schedule_own_packet(batman_if);
@@ -291,12 +288,12 @@ void hardif_disable_interface(struct batman_if *batman_if)
 	struct bat_priv *bat_priv = netdev_priv(soft_device);
 
 	if (batman_if->if_status == IF_ACTIVE)
-		hardif_deactivate_interface(batman_if);
+		hardif_deactivate_interface(soft_device, batman_if);
 
 	if (batman_if->if_status != IF_INACTIVE)
 		return;
 
-	printk(KERN_INFO "batman-adv:Removing interface: %s\n", batman_if->dev);
+	bat_info(soft_device, "Removing interface: %s\n", batman_if->dev);
 	bat_priv->num_ifaces--;
 	orig_hash_del_if(batman_if, bat_priv->num_ifaces);
 
@@ -323,8 +320,7 @@ static struct batman_if *hardif_add_interface(struct net_device *net_dev)
 
 	batman_if = kmalloc(sizeof(struct batman_if), GFP_ATOMIC);
 	if (!batman_if) {
-		printk(KERN_ERR "batman-adv:"
-		       "Can't add interface (%s): out of memory\n",
+		pr_err("Can't add interface (%s): out of memory\n",
 		       net_dev->name);
 		goto out;
 	}
@@ -407,11 +403,11 @@ static int hard_if_event(struct notifier_block *this,
 	case NETDEV_REGISTER:
 		break;
 	case NETDEV_UP:
-		hardif_activate_interface(bat_priv, batman_if);
+		hardif_activate_interface(soft_device, bat_priv, batman_if);
 		break;
 	case NETDEV_GOING_DOWN:
 	case NETDEV_DOWN:
-		hardif_deactivate_interface(batman_if);
+		hardif_deactivate_interface(soft_device, batman_if);
 		break;
 	case NETDEV_UNREGISTER:
 		hardif_remove_interface(batman_if);
@@ -432,11 +428,18 @@ out:
 	return NOTIFY_DONE;
 }
 
+static int batman_skb_recv_finish(struct sk_buff *skb)
+{
+	return NF_ACCEPT;
+}
+
 /* receive a packet with the batman ethertype coming on a hard
  * interface */
 int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
 	struct packet_type *ptype, struct net_device *orig_dev)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct batman_packet *batman_packet;
 	struct batman_if *batman_if;
 	struct net_device_stats *stats;
@@ -452,6 +455,13 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
 	if (atomic_read(&module_state) != MODULE_ACTIVE)
 		goto err_free;
 
+	/* if netfilter/ebtables wants to block incoming batman
+	 * packets then give them a chance to do so here */
+	ret = NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, dev, NULL,
+		      batman_skb_recv_finish);
+	if (ret != 1)
+		goto err_out;
+
 	/* packet should hold at least type and version */
 	if (unlikely(skb_headlen(skb) < 2))
 		goto err_free;
@@ -478,7 +488,7 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
 	batman_packet = (struct batman_packet *)skb->data;
 
 	if (batman_packet->version != COMPAT_VERSION) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: incompatible batman version (%i)\n",
 			batman_packet->version);
 		goto err_free;
@@ -500,7 +510,7 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
 
 		/* unicast packet */
 	case BAT_UNICAST:
-		ret = recv_unicast_packet(skb);
+		ret = recv_unicast_packet(skb, batman_if);
 		break;
 
 		/* broadcast packet */
@@ -531,7 +541,6 @@ err_out:
 	return NET_RX_DROP;
 }
 
-
 struct notifier_block hard_if_notifier = {
 	.notifier_call = hard_if_event,
 };
diff --git a/drivers/staging/batman-adv/hard-interface.h b/drivers/staging/batman-adv/hard-interface.h
index 1e5fc3e720f..d5640b045cb 100644
--- a/drivers/staging/batman-adv/hard-interface.h
+++ b/drivers/staging/batman-adv/hard-interface.h
@@ -19,6 +19,9 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_HARD_INTERFACE_H_
+#define _NET_BATMAN_ADV_HARD_INTERFACE_H_
+
 #define IF_NOT_IN_USE 0
 #define IF_TO_BE_REMOVED 1
 #define IF_INACTIVE 2
@@ -38,3 +41,5 @@ int batman_skb_recv(struct sk_buff *skb,
 				struct net_device *orig_dev);
 int hardif_min_mtu(void);
 void update_min_mtu(void);
+
+#endif /* _NET_BATMAN_ADV_HARD_INTERFACE_H_ */
diff --git a/drivers/staging/batman-adv/hash.c b/drivers/staging/batman-adv/hash.c
index d4a4adc5704..1286f8ff44f 100644
--- a/drivers/staging/batman-adv/hash.c
+++ b/drivers/staging/batman-adv/hash.c
@@ -23,7 +23,7 @@
 #include "hash.h"
 
 /* clears the hash */
-void hash_init(struct hashtable_t *hash)
+static void hash_init(struct hashtable_t *hash)
 {
 	int i;
 
diff --git a/drivers/staging/batman-adv/hash.h b/drivers/staging/batman-adv/hash.h
index ea6d21e0125..c483e1129fc 100644
--- a/drivers/staging/batman-adv/hash.h
+++ b/drivers/staging/batman-adv/hash.h
@@ -19,8 +19,9 @@
  *
  */
 
-#ifndef _BATMAN_HASH_H
-#define _BATMAN_HASH_H
+#ifndef _NET_BATMAN_ADV_HASH_H_
+#define _NET_BATMAN_ADV_HASH_H_
+
 #define HASHIT(name) struct hash_it_t name = { \
 		.index = -1, .bucket = NULL, \
 		.prev_bucket = NULL, \
@@ -56,9 +57,6 @@ struct hashtable_t {
 				     * argument and the size the second */
 };
 
-/* clears the hash */
-void hash_init(struct hashtable_t *hash);
-
 /* allocates and clears the hash */
 struct hashtable_t *hash_new(int size, hashdata_compare_cb compare,
 			     hashdata_choose_cb choose);
@@ -99,6 +97,4 @@ struct hashtable_t *hash_resize(struct hashtable_t *hash, int size);
 struct hash_it_t *hash_iterate(struct hashtable_t *hash,
 			       struct hash_it_t *iter_in);
 
-/* print the hash table for debugging */
-void hash_debug(struct hashtable_t *hash);
-#endif
+#endif /* _NET_BATMAN_ADV_HASH_H_ */
diff --git a/drivers/staging/batman-adv/icmp_socket.c b/drivers/staging/batman-adv/icmp_socket.c
new file mode 100644
index 00000000000..fc3d32c1272
--- /dev/null
+++ b/drivers/staging/batman-adv/icmp_socket.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include "icmp_socket.h"
+#include "send.h"
+#include "types.h"
+#include "hash.h"
+#include "hard-interface.h"
+
+
+static struct socket_client *socket_client_hash[256];
+
+static void bat_socket_add_packet(struct socket_client *socket_client,
+				  struct icmp_packet_rr *icmp_packet,
+				  size_t icmp_len);
+
+void bat_socket_init(void)
+{
+	memset(socket_client_hash, 0, sizeof(socket_client_hash));
+}
+
+static int bat_socket_open(struct inode *inode, struct file *file)
+{
+	unsigned int i;
+	struct socket_client *socket_client;
+
+	socket_client = kmalloc(sizeof(struct socket_client), GFP_KERNEL);
+
+	if (!socket_client)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(socket_client_hash); i++) {
+		if (!socket_client_hash[i]) {
+			socket_client_hash[i] = socket_client;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(socket_client_hash)) {
+		pr_err("Error - can't add another packet client: "
+		       "maximum number of clients reached\n");
+		kfree(socket_client);
+		return -EXFULL;
+	}
+
+	INIT_LIST_HEAD(&socket_client->queue_list);
+	socket_client->queue_len = 0;
+	socket_client->index = i;
+	spin_lock_init(&socket_client->lock);
+	init_waitqueue_head(&socket_client->queue_wait);
+
+	file->private_data = socket_client;
+
+	inc_module_count();
+	return 0;
+}
+
+static int bat_socket_release(struct inode *inode, struct file *file)
+{
+	struct socket_client *socket_client = file->private_data;
+	struct socket_packet *socket_packet;
+	struct list_head *list_pos, *list_pos_tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&socket_client->lock, flags);
+
+	/* for all packets in the queue ... */
+	list_for_each_safe(list_pos, list_pos_tmp, &socket_client->queue_list) {
+		socket_packet = list_entry(list_pos,
+					   struct socket_packet, list);
+
+		list_del(list_pos);
+		kfree(socket_packet);
+	}
+
+	socket_client_hash[socket_client->index] = NULL;
+	spin_unlock_irqrestore(&socket_client->lock, flags);
+
+	kfree(socket_client);
+	dec_module_count();
+
+	return 0;
+}
+
+static ssize_t bat_socket_read(struct file *file, char __user *buf,
+			       size_t count, loff_t *ppos)
+{
+	struct socket_client *socket_client = file->private_data;
+	struct socket_packet *socket_packet;
+	size_t packet_len;
+	int error;
+	unsigned long flags;
+
+	if ((file->f_flags & O_NONBLOCK) && (socket_client->queue_len == 0))
+		return -EAGAIN;
+
+	if ((!buf) || (count < sizeof(struct icmp_packet)))
+		return -EINVAL;
+
+	if (!access_ok(VERIFY_WRITE, buf, count))
+		return -EFAULT;
+
+	error = wait_event_interruptible(socket_client->queue_wait,
+					 socket_client->queue_len);
+
+	if (error)
+		return error;
+
+	spin_lock_irqsave(&socket_client->lock, flags);
+
+	socket_packet = list_first_entry(&socket_client->queue_list,
+					 struct socket_packet, list);
+	list_del(&socket_packet->list);
+	socket_client->queue_len--;
+
+	spin_unlock_irqrestore(&socket_client->lock, flags);
+
+	error = __copy_to_user(buf, &socket_packet->icmp_packet,
+			       socket_packet->icmp_len);
+
+	packet_len = socket_packet->icmp_len;
+	kfree(socket_packet);
+
+	if (error)
+		return -EFAULT;
+
+	return packet_len;
+}
+
+static ssize_t bat_socket_write(struct file *file, const char __user *buff,
+				size_t len, loff_t *off)
+{
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+	struct socket_client *socket_client = file->private_data;
+	struct icmp_packet_rr icmp_packet;
+	struct orig_node *orig_node;
+	struct batman_if *batman_if;
+	size_t packet_len = sizeof(struct icmp_packet);
+	uint8_t dstaddr[ETH_ALEN];
+	unsigned long flags;
+
+	if (len < sizeof(struct icmp_packet)) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"invalid packet size\n");
+		return -EINVAL;
+	}
+
+	if (len >= sizeof(struct icmp_packet_rr))
+		packet_len = sizeof(struct icmp_packet_rr);
+
+	if (!access_ok(VERIFY_READ, buff, packet_len))
+		return -EFAULT;
+
+	if (__copy_from_user(&icmp_packet, buff, packet_len))
+		return -EFAULT;
+
+	if (icmp_packet.packet_type != BAT_ICMP) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"got bogus packet type (expected: BAT_ICMP)\n");
+		return -EINVAL;
+	}
+
+	if (icmp_packet.msg_type != ECHO_REQUEST) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"got bogus message type (expected: ECHO_REQUEST)\n");
+		return -EINVAL;
+	}
+
+	icmp_packet.uid = socket_client->index;
+
+	if (icmp_packet.version != COMPAT_VERSION) {
+		icmp_packet.msg_type = PARAMETER_PROBLEM;
+		icmp_packet.ttl = COMPAT_VERSION;
+		bat_socket_add_packet(socket_client, &icmp_packet, packet_len);
+		goto out;
+	}
+
+	if (atomic_read(&module_state) != MODULE_ACTIVE)
+		goto dst_unreach;
+
+	spin_lock_irqsave(&orig_hash_lock, flags);
+	orig_node = ((struct orig_node *)hash_find(orig_hash, icmp_packet.dst));
+
+	if (!orig_node)
+		goto unlock;
+
+	if (!orig_node->router)
+		goto unlock;
+
+	batman_if = orig_node->router->if_incoming;
+	memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+
+	spin_unlock_irqrestore(&orig_hash_lock, flags);
+
+	if (!batman_if)
+		goto dst_unreach;
+
+	if (batman_if->if_status != IF_ACTIVE)
+		goto dst_unreach;
+
+	memcpy(icmp_packet.orig, batman_if->net_dev->dev_addr, ETH_ALEN);
+
+	if (packet_len == sizeof(struct icmp_packet_rr))
+		memcpy(icmp_packet.rr, batman_if->net_dev->dev_addr, ETH_ALEN);
+
+	send_raw_packet((unsigned char *)&icmp_packet,
+			packet_len, batman_if, dstaddr);
+
+	goto out;
+
+unlock:
+	spin_unlock_irqrestore(&orig_hash_lock, flags);
+dst_unreach:
+	icmp_packet.msg_type = DESTINATION_UNREACHABLE;
+	bat_socket_add_packet(socket_client, &icmp_packet, packet_len);
+out:
+	return len;
+}
+
+static unsigned int bat_socket_poll(struct file *file, poll_table *wait)
+{
+	struct socket_client *socket_client = file->private_data;
+
+	poll_wait(file, &socket_client->queue_wait, wait);
+
+	if (socket_client->queue_len > 0)
+		return POLLIN | POLLRDNORM;
+
+	return 0;
+}
+
+static const struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = bat_socket_open,
+	.release = bat_socket_release,
+	.read = bat_socket_read,
+	.write = bat_socket_write,
+	.poll = bat_socket_poll,
+};
+
+int bat_socket_setup(struct bat_priv *bat_priv)
+{
+	struct dentry *d;
+
+	if (!bat_priv->debug_dir)
+		goto err;
+
+	d = debugfs_create_file(ICMP_SOCKET, S_IFREG | S_IWUSR | S_IRUSR,
+				bat_priv->debug_dir, NULL, &fops);
+	if (d)
+		goto err;
+
+	return 0;
+
+err:
+	return 1;
+}
+
+static void bat_socket_add_packet(struct socket_client *socket_client,
+				  struct icmp_packet_rr *icmp_packet,
+				  size_t icmp_len)
+{
+	struct socket_packet *socket_packet;
+	unsigned long flags;
+
+	socket_packet = kmalloc(sizeof(struct socket_packet), GFP_ATOMIC);
+
+	if (!socket_packet)
+		return;
+
+	INIT_LIST_HEAD(&socket_packet->list);
+	memcpy(&socket_packet->icmp_packet, icmp_packet, icmp_len);
+	socket_packet->icmp_len = icmp_len;
+
+	spin_lock_irqsave(&socket_client->lock, flags);
+
+	/* while waiting for the lock the socket_client could have been
+	 * deleted */
+	if (!socket_client_hash[icmp_packet->uid]) {
+		spin_unlock_irqrestore(&socket_client->lock, flags);
+		kfree(socket_packet);
+		return;
+	}
+
+	list_add_tail(&socket_packet->list, &socket_client->queue_list);
+	socket_client->queue_len++;
+
+	if (socket_client->queue_len > 100) {
+		socket_packet = list_first_entry(&socket_client->queue_list,
+						 struct socket_packet, list);
+
+		list_del(&socket_packet->list);
+		kfree(socket_packet);
+		socket_client->queue_len--;
+	}
+
+	spin_unlock_irqrestore(&socket_client->lock, flags);
+
+	wake_up(&socket_client->queue_wait);
+}
+
+void bat_socket_receive_packet(struct icmp_packet_rr *icmp_packet,
+			       size_t icmp_len)
+{
+	struct socket_client *hash = socket_client_hash[icmp_packet->uid];
+
+	if (hash)
+		bat_socket_add_packet(hash, icmp_packet, icmp_len);
+}
diff --git a/drivers/staging/batman-adv/device.h b/drivers/staging/batman-adv/icmp_socket.h
index eb14b371cea..bf9b348cde2 100644
--- a/drivers/staging/batman-adv/device.h
+++ b/drivers/staging/batman-adv/icmp_socket.h
@@ -19,18 +19,16 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_ICMP_SOCKET_H_
+#define _NET_BATMAN_ADV_ICMP_SOCKET_H_
+
 #include "types.h"
 
-void bat_device_init(void);
-int bat_device_setup(void);
-void bat_device_destroy(void);
-int bat_device_open(struct inode *inode, struct file *file);
-int bat_device_release(struct inode *inode, struct file *file);
-ssize_t bat_device_read(struct file *file, char __user *buf, size_t count,
-			loff_t *ppos);
-ssize_t bat_device_write(struct file *file, const char __user *buff,
-			 size_t len, loff_t *off);
-unsigned int bat_device_poll(struct file *file, poll_table *wait);
-void bat_device_add_packet(struct device_client *device_client,
-			   struct icmp_packet *icmp_packet);
-void bat_device_receive_packet(struct icmp_packet *icmp_packet);
+#define ICMP_SOCKET "socket"
+
+void bat_socket_init(void);
+int bat_socket_setup(struct bat_priv *bat_priv);
+void bat_socket_receive_packet(struct icmp_packet_rr *icmp_packet,
+			       size_t icmp_len);
+
+#endif /* _NET_BATMAN_ADV_ICMP_SOCKET_H_ */
diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c
index 74c70d589a9..2686019fe4e 100644
--- a/drivers/staging/batman-adv/main.c
+++ b/drivers/staging/batman-adv/main.c
@@ -21,11 +21,12 @@
 
 #include "main.h"
 #include "bat_sysfs.h"
+#include "bat_debugfs.h"
 #include "routing.h"
 #include "send.h"
 #include "originator.h"
 #include "soft-interface.h"
-#include "device.h"
+#include "icmp_socket.h"
 #include "translation-table.h"
 #include "hard-interface.h"
 #include "types.h"
@@ -41,7 +42,6 @@ DEFINE_SPINLOCK(orig_hash_lock);
 DEFINE_SPINLOCK(forw_bat_list_lock);
 DEFINE_SPINLOCK(forw_bcast_list_lock);
 
-atomic_t vis_interval;
 atomic_t bcast_queue_left;
 atomic_t batman_queue_left;
 
@@ -49,7 +49,7 @@ int16_t num_hna;
 
 struct net_device *soft_device;
 
-unsigned char broadcastAddr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+unsigned char broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 atomic_t module_state;
 
 static struct packet_type batman_adv_packet_type __read_mostly = {
@@ -59,18 +59,7 @@ static struct packet_type batman_adv_packet_type __read_mostly = {
 
 struct workqueue_struct *bat_event_workqueue;
 
-#ifdef CONFIG_BATMAN_ADV_DEBUG
-int debug;
-
-module_param(debug, int, 0644);
-
-int bat_debug_type(int type)
-{
-	return debug & type;
-}
-#endif
-
-int init_module(void)
+static int __init batman_init(void)
 {
 	int retval;
 
@@ -80,8 +69,6 @@ int init_module(void)
 
 	atomic_set(&module_state, MODULE_INACTIVE);
 
-	atomic_set(&vis_interval, 1000);/* TODO: raise this later, this is only
-					 * for debugging now. */
 	atomic_set(&bcast_queue_left, BCAST_QUEUE_LEN);
 	atomic_set(&batman_queue_left, BATMAN_QUEUE_LEN);
 
@@ -92,23 +79,22 @@ int init_module(void)
 	if (!bat_event_workqueue)
 		return -ENOMEM;
 
-	bat_device_init();
+	bat_socket_init();
+	debugfs_init();
 
 	/* initialize layer 2 interface */
 	soft_device = alloc_netdev(sizeof(struct bat_priv) , "bat%d",
 				   interface_setup);
 
 	if (!soft_device) {
-		printk(KERN_ERR "batman-adv:"
-		       "Unable to allocate the batman interface\n");
+		pr_err("Unable to allocate the batman interface\n");
 		goto end;
 	}
 
 	retval = register_netdev(soft_device);
 
 	if (retval < 0) {
-		printk(KERN_ERR "batman-adv:"
-		       "Unable to register the batman interface: %i\n", retval);
+		pr_err("Unable to register the batman interface: %i\n", retval);
 		goto free_soft_device;
 	}
 
@@ -117,15 +103,22 @@ int init_module(void)
 	if (retval < 0)
 		goto unreg_soft_device;
 
+	retval = debugfs_add_meshif(soft_device);
+
+	if (retval < 0)
+		goto unreg_sysfs;
+
 	register_netdevice_notifier(&hard_if_notifier);
 	dev_add_pack(&batman_adv_packet_type);
 
-	printk(KERN_INFO "batman-adv:"
-	       "B.A.T.M.A.N. advanced %s%s (compatibility version %i) loaded\n",
-	       SOURCE_VERSION, REVISION_VERSION_STR, COMPAT_VERSION);
+	pr_info("B.A.T.M.A.N. advanced %s%s (compatibility version %i) "
+		"loaded\n", SOURCE_VERSION, REVISION_VERSION_STR,
+		COMPAT_VERSION);
 
 	return 0;
 
+unreg_sysfs:
+	sysfs_del_meshif(soft_device);
 unreg_soft_device:
 	unregister_netdev(soft_device);
 	soft_device = NULL;
@@ -138,14 +131,16 @@ end:
 	return -ENOMEM;
 }
 
-void cleanup_module(void)
+static void __exit batman_exit(void)
 {
 	deactivate_module();
 
+	debugfs_destroy();
 	unregister_netdevice_notifier(&hard_if_notifier);
 	hardif_remove_interfaces();
 
 	if (soft_device) {
+		debugfs_del_meshif(soft_device);
 		sysfs_del_meshif(soft_device);
 		unregister_netdev(soft_device);
 		soft_device = NULL;
@@ -157,7 +152,7 @@ void cleanup_module(void)
 	bat_event_workqueue = NULL;
 }
 
-/* activates the module, creates bat device, starts timer ... */
+/* activates the module, starts timer ... */
 void activate_module(void)
 {
 	if (originator_init() < 1)
@@ -171,9 +166,6 @@ void activate_module(void)
 
 	hna_local_add(soft_device->dev_addr);
 
-	if (bat_device_setup() < 1)
-		goto end;
-
 	if (vis_init() < 1)
 		goto err;
 
@@ -182,8 +174,7 @@ void activate_module(void)
 	goto end;
 
 err:
-	printk(KERN_ERR "batman-adv:"
-	       "Unable to allocate memory for mesh information structures: "
+	pr_err("Unable to allocate memory for mesh information structures: "
 	       "out of mem ?\n");
 	deactivate_module();
 end:
@@ -208,7 +199,6 @@ void deactivate_module(void)
 	hna_global_free();
 
 	synchronize_net();
-	bat_device_destroy();
 
 	synchronize_rcu();
 	atomic_set(&module_state, MODULE_INACTIVE);
@@ -226,8 +216,7 @@ void dec_module_count(void)
 
 int addr_to_string(char *buff, uint8_t *addr)
 {
-	return sprintf(buff, MAC_FMT,
-		       addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+	return sprintf(buff, "%pM", addr);
 }
 
 /* returns 1 if they are the same originator */
@@ -284,6 +273,9 @@ int is_mcast(uint8_t *addr)
 	return *addr & 0x01;
 }
 
+module_init(batman_init);
+module_exit(batman_exit);
+
 MODULE_LICENSE("GPL");
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
diff --git a/drivers/staging/batman-adv/main.h b/drivers/staging/batman-adv/main.h
index 5f8343d360f..8513261b8a7 100644
--- a/drivers/staging/batman-adv/main.h
+++ b/drivers/staging/batman-adv/main.h
@@ -19,6 +19,9 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_MAIN_H_
+#define _NET_BATMAN_ADV_MAIN_H_
+
 /* Kernel Programming */
 #define LINUX
 
@@ -27,7 +30,7 @@
 #define DRIVER_DESC   "B.A.T.M.A.N. advanced"
 #define DRIVER_DEVICE "batman-adv"
 
-#define SOURCE_VERSION "0.2.2-beta"
+#define SOURCE_VERSION "maint"
 
 
 /* B.A.T.M.A.N. parameters */
@@ -36,10 +39,10 @@
 #define JITTER 20
 #define TTL 50			  /* Time To Live of broadcast messages */
 
-#define PURGE_TIMEOUT 200000	  /* purge originators after time in ms if no
+#define PURGE_TIMEOUT 200	/* purge originators after time in seconds if no
 				   * valid packet comes in -> TODO: check
 				   * influence on TQ_LOCAL_WINDOW_SIZE */
-#define LOCAL_HNA_TIMEOUT 3600000
+#define LOCAL_HNA_TIMEOUT 3600 /* in seconds */
 
 #define TQ_LOCAL_WINDOW_SIZE 64	  /* sliding packet range of received originator
 				   * messages in squence numbers (should be a
@@ -57,44 +60,42 @@
 #define LOG_BUF_LEN 8192	  /* has to be a power of 2 */
 #define ETH_STR_LEN 20
 
+#define VIS_INTERVAL 5000	/* 5 seconds */
+
+/* how much worse secondary interfaces may be to
+ * to be considered as bonding candidates */
+
+#define BONDING_TQ_THRESHOLD	50
+
 #define MAX_AGGREGATION_BYTES 512 /* should not be bigger than 512 bytes or
 				   * change the size of
 				   * forw_packet->direct_link_flags */
 #define MAX_AGGREGATION_MS 100
 
 #define RESET_PROTECTION_MS 30000
-#define EXPECTED_SEQNO_RANGE	4096
+#define EXPECTED_SEQNO_RANGE	65536
 /* don't reset again within 30 seconds */
 
 #define MODULE_INACTIVE 0
 #define MODULE_ACTIVE 1
 #define MODULE_DEACTIVATING 2
 
-#define BCAST_QUEUE_LEN 256
+#define BCAST_QUEUE_LEN		256
 #define BATMAN_QUEUE_LEN	256
 
 /*
  * Debug Messages
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* Append 'batman-adv: ' before
+					     * kernel messages */
 
 #define DBG_BATMAN 1	/* all messages related to routing / flooding /
 			 * broadcasting / etc */
 #define DBG_ROUTES 2	/* route or hna added / changed / deleted */
+#define DBG_ALL 3
 
-#ifdef CONFIG_BATMAN_ADV_DEBUG
-extern int debug;
+#define LOG_BUF_LEN 8192          /* has to be a power of 2 */
 
-extern int bat_debug_type(int type);
-#define bat_dbg(type, fmt, arg...) do {					\
-		if (bat_debug_type(type))				\
-			printk(KERN_DEBUG "batman-adv:" fmt, ## arg);	\
-	}								\
-	while (0)
-#else /* !CONFIG_BATMAN_ADV_DEBUG */
-#define bat_dbg(type, fmt, arg...) do {		\
-	}					\
-	while (0)
-#endif
 
 /*
  *  Vis
@@ -117,6 +118,7 @@ extern int bat_debug_type(int type);
 #include <linux/slab.h>
 #include <net/sock.h>		/* struct sock */
 #include <linux/jiffies.h>
+#include <linux/seq_file.h>
 #include "types.h"
 
 #ifndef REVISION_VERSION
@@ -134,14 +136,13 @@ extern spinlock_t orig_hash_lock;
 extern spinlock_t forw_bat_list_lock;
 extern spinlock_t forw_bcast_list_lock;
 
-extern atomic_t vis_interval;
 extern atomic_t bcast_queue_left;
 extern atomic_t batman_queue_left;
 extern int16_t num_hna;
 
 extern struct net_device *soft_device;
 
-extern unsigned char broadcastAddr[];
+extern unsigned char broadcast_addr[];
 extern atomic_t module_state;
 extern struct workqueue_struct *bat_event_workqueue;
 
@@ -155,3 +156,44 @@ int choose_orig(void *data, int32_t size);
 int is_my_mac(uint8_t *addr);
 int is_bcast(uint8_t *addr);
 int is_mcast(uint8_t *addr);
+
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+extern int debug_log(struct bat_priv *bat_priv, char *fmt, ...);
+
+#define bat_dbg(type, bat_priv, fmt, arg...)			\
+	do {							\
+		if (atomic_read(&bat_priv->log_level) & type)	\
+			debug_log(bat_priv, fmt, ## arg);	\
+	}							\
+	while (0)
+#else /* !CONFIG_BATMAN_ADV_DEBUG */
+static inline void bat_dbg(char type __attribute__((unused)),
+			   struct bat_priv *bat_priv __attribute__((unused)),
+			   char *fmt __attribute__((unused)), ...)
+{
+}
+#endif
+
+#define bat_warning(net_dev, fmt, arg...)				\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_warning("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+#define bat_info(net_dev, fmt, arg...)					\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_info("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+#define bat_err(net_dev, fmt, arg...)					\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_err("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+
+#endif /* _NET_BATMAN_ADV_MAIN_H_ */
diff --git a/drivers/staging/batman-adv/originator.c b/drivers/staging/batman-adv/originator.c
index 568aef8371b..28bb627ffa1 100644
--- a/drivers/staging/batman-adv/originator.c
+++ b/drivers/staging/batman-adv/originator.c
@@ -56,28 +56,16 @@ err:
 	return 0;
 }
 
-void originator_free(void)
-{
-	unsigned long flags;
-
-	if (!orig_hash)
-		return;
-
-	cancel_delayed_work_sync(&purge_orig_wq);
-
-	spin_lock_irqsave(&orig_hash_lock, flags);
-	hash_delete(orig_hash, free_orig_node);
-	orig_hash = NULL;
-	spin_unlock_irqrestore(&orig_hash_lock, flags);
-}
-
 struct neigh_node *
 create_neighbor(struct orig_node *orig_node, struct orig_node *orig_neigh_node,
 		uint8_t *neigh, struct batman_if *if_incoming)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct neigh_node *neigh_node;
 
-	bat_dbg(DBG_BATMAN, "Creating new last-hop neighbor of originator\n");
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Creating new last-hop neighbor of originator\n");
 
 	neigh_node = kzalloc(sizeof(struct neigh_node), GFP_ATOMIC);
 	if (!neigh_node)
@@ -93,7 +81,7 @@ create_neighbor(struct orig_node *orig_node, struct orig_node *orig_neigh_node,
 	return neigh_node;
 }
 
-void free_orig_node(void *data)
+static void free_orig_node(void *data)
 {
 	struct list_head *list_pos, *list_pos_tmp;
 	struct neigh_node *neigh_node;
@@ -114,6 +102,21 @@ void free_orig_node(void *data)
 	kfree(orig_node);
 }
 
+void originator_free(void)
+{
+	unsigned long flags;
+
+	if (!orig_hash)
+		return;
+
+	cancel_delayed_work_sync(&purge_orig_wq);
+
+	spin_lock_irqsave(&orig_hash_lock, flags);
+	hash_delete(orig_hash, free_orig_node);
+	orig_hash = NULL;
+	spin_unlock_irqrestore(&orig_hash_lock, flags);
+}
+
 /* this function finds or creates an originator entry for the given
  * address if it does not exits */
 struct orig_node *get_orig_node(uint8_t *addr)
@@ -129,7 +132,8 @@ struct orig_node *get_orig_node(uint8_t *addr)
 	if (orig_node != NULL)
 		return orig_node;
 
-	bat_dbg(DBG_BATMAN, "Creating new originator: %pM\n", addr);
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Creating new originator: %pM\n", addr);
 
 	orig_node = kzalloc(sizeof(struct orig_node), GFP_ATOMIC);
 	if (!orig_node)
@@ -163,8 +167,8 @@ struct orig_node *get_orig_node(uint8_t *addr)
 		swaphash = hash_resize(orig_hash, orig_hash->size * 2);
 
 		if (swaphash == NULL)
-			printk(KERN_ERR
-			       "batman-adv:Couldn't resize orig hash table\n");
+			bat_err(soft_device,
+				"Couldn't resize orig hash table\n");
 		else
 			orig_hash = swaphash;
 	}
@@ -182,6 +186,8 @@ free_orig_node:
 static bool purge_orig_neighbors(struct orig_node *orig_node,
 				 struct neigh_node **best_neigh_node)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct list_head *list_pos, *list_pos_tmp;
 	struct neigh_node *neigh_node;
 	bool neigh_purged = false;
@@ -193,20 +199,19 @@ static bool purge_orig_neighbors(struct orig_node *orig_node,
 		neigh_node = list_entry(list_pos, struct neigh_node, list);
 
 		if ((time_after(jiffies,
-			       (neigh_node->last_valid +
-				((PURGE_TIMEOUT * HZ) / 1000)))) ||
+			neigh_node->last_valid + PURGE_TIMEOUT * HZ)) ||
 		    (neigh_node->if_incoming->if_status ==
 						IF_TO_BE_REMOVED)) {
 
 			if (neigh_node->if_incoming->if_status ==
 							IF_TO_BE_REMOVED)
-				bat_dbg(DBG_BATMAN,
+				bat_dbg(DBG_BATMAN, bat_priv,
 					"neighbor purge: originator %pM, "
 					"neighbor: %pM, iface: %s\n",
 					orig_node->orig, neigh_node->addr,
 					neigh_node->if_incoming->dev);
 			else
-				bat_dbg(DBG_BATMAN,
+				bat_dbg(DBG_BATMAN, bat_priv,
 					"neighbor timeout: originator %pM, "
 					"neighbor: %pM, last_valid: %lu\n",
 					orig_node->orig, neigh_node->addr,
@@ -226,21 +231,26 @@ static bool purge_orig_neighbors(struct orig_node *orig_node,
 
 static bool purge_orig_node(struct orig_node *orig_node)
 {
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct neigh_node *best_neigh_node;
 
 	if (time_after(jiffies,
-		       (orig_node->last_valid +
-			((2 * PURGE_TIMEOUT * HZ) / 1000)))) {
+		orig_node->last_valid + 2 * PURGE_TIMEOUT * HZ)) {
 
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Originator timeout: originator %pM, last_valid %lu\n",
 			orig_node->orig, (orig_node->last_valid / HZ));
 		return true;
 	} else {
-		if (purge_orig_neighbors(orig_node, &best_neigh_node))
+		if (purge_orig_neighbors(orig_node, &best_neigh_node)) {
 			update_routes(orig_node, best_neigh_node,
 				      orig_node->hna_buff,
 				      orig_node->hna_buff_len);
+			/* update bonding candidates, we could have lost
+			 * some candidates. */
+			update_bonding_candidates(bat_priv, orig_node);
+		}
 	}
 
 	return false;
@@ -271,49 +281,41 @@ void purge_orig(struct work_struct *work)
 		start_purge_timer();
 }
 
-ssize_t orig_fill_buffer_text(struct net_device *net_dev, char *buff,
-			      size_t count, loff_t off)
+int orig_seq_print_text(struct seq_file *seq, void *offset)
 {
 	HASHIT(hashit);
+	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
 	struct orig_node *orig_node;
 	struct neigh_node *neigh_node;
-	size_t hdr_len, tmp_len;
-	int batman_count = 0, bytes_written = 0;
+	int batman_count = 0;
+	int last_seen_secs;
+	int last_seen_msecs;
 	unsigned long flags;
 	char orig_str[ETH_STR_LEN], router_str[ETH_STR_LEN];
 
-	if (!bat_priv->primary_if) {
-		if (off == 0)
-			return sprintf(buff,
-				     "BATMAN mesh %s disabled - "
+	if ((!bat_priv->primary_if) ||
+	    (bat_priv->primary_if->if_status != IF_ACTIVE)) {
+		if (!bat_priv->primary_if)
+			return seq_printf(seq, "BATMAN mesh %s disabled - "
 				     "please specify interfaces to enable it\n",
 				     net_dev->name);
 
-		return 0;
+		return seq_printf(seq, "BATMAN mesh %s "
+				  "disabled - primary interface not active\n",
+				  net_dev->name);
 	}
 
-	if (bat_priv->primary_if->if_status != IF_ACTIVE && off == 0)
-		return sprintf(buff,
-			       "BATMAN mesh %s "
-			       "disabled - primary interface not active\n",
-			       net_dev->name);
-	else if (bat_priv->primary_if->if_status != IF_ACTIVE)
-		return 0;
-
 	rcu_read_lock();
-	hdr_len = sprintf(buff,
-		   "  %-14s (%s/%i) %17s [%10s]: %20s "
-		   "... [B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%s (%s)]\n",
-		   "Originator", "#", TQ_MAX_VALUE, "Nexthop", "outgoingIF",
-		   "Potential nexthops", SOURCE_VERSION, REVISION_VERSION_STR,
+	seq_printf(seq, "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%s (%s)]\n",
+		   SOURCE_VERSION, REVISION_VERSION_STR,
 		   bat_priv->primary_if->dev, bat_priv->primary_if->addr_str,
 		   net_dev->name);
+	seq_printf(seq, "  %-15s %s (%s/%i) %17s [%10s]: %20s ...\n",
+		   "Originator", "last-seen", "#", TQ_MAX_VALUE, "Nexthop",
+		   "outgoingIF", "Potential nexthops");
 	rcu_read_unlock();
 
-	if (off < hdr_len)
-		bytes_written = hdr_len;
-
 	spin_lock_irqsave(&orig_hash_lock, flags);
 
 	while (hash_iterate(orig_hash, &hashit)) {
@@ -326,44 +328,34 @@ ssize_t orig_fill_buffer_text(struct net_device *net_dev, char *buff,
 		if (orig_node->router->tq_avg == 0)
 			continue;
 
-		/* estimated line length */
-		if (count < bytes_written + 200)
-			break;
-
 		addr_to_string(orig_str, orig_node->orig);
 		addr_to_string(router_str, orig_node->router->addr);
+		last_seen_secs = jiffies_to_msecs(jiffies -
+						orig_node->last_valid) / 1000;
+		last_seen_msecs = jiffies_to_msecs(jiffies -
+						orig_node->last_valid) % 1000;
 
-		tmp_len = sprintf(buff + bytes_written,
-				  "%-17s  (%3i) %17s [%10s]:",
-				   orig_str, orig_node->router->tq_avg,
-				   router_str,
-				   orig_node->router->if_incoming->dev);
+		seq_printf(seq, "%-17s %4i.%03is   (%3i) %17s [%10s]:",
+			   orig_str, last_seen_secs, last_seen_msecs,
+			   orig_node->router->tq_avg, router_str,
+			   orig_node->router->if_incoming->dev);
 
 		list_for_each_entry(neigh_node, &orig_node->neigh_list, list) {
 			addr_to_string(orig_str, neigh_node->addr);
-			tmp_len += sprintf(buff + bytes_written + tmp_len,
-					   " %17s (%3i)", orig_str,
+			seq_printf(seq, " %17s (%3i)", orig_str,
 					   neigh_node->tq_avg);
 		}
 
-		tmp_len += sprintf(buff + bytes_written + tmp_len, "\n");
-
+		seq_printf(seq, "\n");
 		batman_count++;
-		hdr_len += tmp_len;
-
-		if (off >= hdr_len)
-			continue;
-
-		bytes_written += tmp_len;
 	}
 
 	spin_unlock_irqrestore(&orig_hash_lock, flags);
 
-	if ((batman_count == 0) && (off == 0))
-		bytes_written += sprintf(buff + bytes_written,
-					"No batman nodes in range ...\n");
+	if ((batman_count == 0))
+		seq_printf(seq, "No batman nodes in range ...\n");
 
-	return bytes_written;
+	return 0;
 }
 
 static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
@@ -373,8 +365,7 @@ static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
 	data_ptr = kmalloc(max_if_num * sizeof(TYPE_OF_WORD) * NUM_WORDS,
 			   GFP_ATOMIC);
 	if (!data_ptr) {
-		printk(KERN_ERR
-		       "batman-adv:Can't resize orig: out of memory\n");
+		pr_err("Can't resize orig: out of memory\n");
 		return -1;
 	}
 
@@ -385,8 +376,7 @@ static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
 
 	data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC);
 	if (!data_ptr) {
-		printk(KERN_ERR
-		       "batman-adv:Can't resize orig: out of memory\n");
+		pr_err("Can't resize orig: out of memory\n");
 		return -1;
 	}
 
@@ -435,8 +425,7 @@ static int orig_node_del_if(struct orig_node *orig_node,
 	chunk_size = sizeof(TYPE_OF_WORD) * NUM_WORDS;
 	data_ptr = kmalloc(max_if_num * chunk_size, GFP_ATOMIC);
 	if (!data_ptr) {
-		printk(KERN_ERR
-		       "batman-adv:Can't resize orig: out of memory\n");
+		pr_err("Can't resize orig: out of memory\n");
 		return -1;
 	}
 
@@ -457,8 +446,7 @@ free_bcast_own:
 
 	data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC);
 	if (!data_ptr) {
-		printk(KERN_ERR
-		       "batman-adv:Can't resize orig: out of memory\n");
+		pr_err("Can't resize orig: out of memory\n");
 		return -1;
 	}
 
diff --git a/drivers/staging/batman-adv/originator.h b/drivers/staging/batman-adv/originator.h
index afbc7c0e8aa..e88411d9db7 100644
--- a/drivers/staging/batman-adv/originator.h
+++ b/drivers/staging/batman-adv/originator.h
@@ -19,16 +19,18 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_ORIGINATOR_H_
+#define _NET_BATMAN_ADV_ORIGINATOR_H_
+
 int originator_init(void);
-void free_orig_node(void *data);
 void originator_free(void);
 void purge_orig(struct work_struct *work);
-struct orig_node *orig_find(char *mac);
 struct orig_node *get_orig_node(uint8_t *addr);
 struct neigh_node *
 create_neighbor(struct orig_node *orig_node, struct orig_node *orig_neigh_node,
 		uint8_t *neigh, struct batman_if *if_incoming);
-ssize_t orig_fill_buffer_text(struct net_device *net_dev, char *buff,
-			      size_t count, loff_t off);
+int orig_seq_print_text(struct seq_file *seq, void *offset);
 int orig_hash_add_if(struct batman_if *batman_if, int max_if_num);
 int orig_hash_del_if(struct batman_if *batman_if, int max_if_num);
+
+#endif /* _NET_BATMAN_ADV_ORIGINATOR_H_ */
diff --git a/drivers/staging/batman-adv/packet.h b/drivers/staging/batman-adv/packet.h
index 152f57b1c6c..abb5e460f23 100644
--- a/drivers/staging/batman-adv/packet.h
+++ b/drivers/staging/batman-adv/packet.h
@@ -19,6 +19,9 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_PACKET_H_
+#define _NET_BATMAN_ADV_PACKET_H_
+
 #define ETH_P_BATMAN  0x4305	/* unofficial/not registered Ethertype */
 
 #define BAT_PACKET    0x01
@@ -28,9 +31,10 @@
 #define BAT_VIS       0x05
 
 /* this file is included by batctl which needs these defines */
-#define COMPAT_VERSION 8
+#define COMPAT_VERSION 11
 #define DIRECTLINK 0x40
 #define VIS_SERVER 0x20
+#define PRIMARIES_FIRST_HOP 0x10
 
 /* ICMP message types */
 #define ECHO_REPLY 0
@@ -48,7 +52,7 @@ struct batman_packet {
 	uint8_t  version;  /* batman version field */
 	uint8_t  flags;    /* 0x40: DIRECTLINK flag, 0x20 VIS_SERVER flag... */
 	uint8_t  tq;
-	uint16_t seqno;
+	uint32_t seqno;
 	uint8_t  orig[6];
 	uint8_t  prev_sender[6];
 	uint8_t  ttl;
@@ -68,6 +72,23 @@ struct icmp_packet {
 	uint8_t  uid;
 } __attribute__((packed));
 
+#define BAT_RR_LEN 16
+
+/* icmp_packet_rr must start with all fields from imcp_packet
+   as this is assumed by code that handles ICMP packets */
+struct icmp_packet_rr {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  msg_type; /* see ICMP message types above */
+	uint8_t  ttl;
+	uint8_t  dst[6];
+	uint8_t  orig[6];
+	uint16_t seqno;
+	uint8_t  uid;
+	uint8_t  rr_cur;
+	uint8_t  rr[BAT_RR_LEN][ETH_ALEN];
+} __attribute__((packed));
+
 struct unicast_packet {
 	uint8_t  packet_type;
 	uint8_t  version;  /* batman version field */
@@ -79,18 +100,21 @@ struct bcast_packet {
 	uint8_t  packet_type;
 	uint8_t  version;  /* batman version field */
 	uint8_t  orig[6];
-	uint16_t seqno;
+	uint8_t  ttl;
+	uint32_t seqno;
 } __attribute__((packed));
 
 struct vis_packet {
 	uint8_t  packet_type;
 	uint8_t  version;        /* batman version field */
 	uint8_t  vis_type;	 /* which type of vis-participant sent this? */
-	uint8_t  seqno;		 /* sequence number */
 	uint8_t  entries;	 /* number of entries behind this struct */
+	uint32_t seqno;		 /* sequence number */
 	uint8_t  ttl;		 /* TTL */
 	uint8_t  vis_orig[6];	 /* originator that informs about its
 				  * neighbors */
 	uint8_t  target_orig[6]; /* who should receive this packet */
 	uint8_t  sender_orig[6]; /* who sent or rebroadcasted this packet */
 } __attribute__((packed));
+
+#endif /* _NET_BATMAN_ADV_PACKET_H_ */
diff --git a/drivers/staging/batman-adv/ring_buffer.h b/drivers/staging/batman-adv/ring_buffer.h
index b8c9456558b..6b0cb9aaeba 100644
--- a/drivers/staging/batman-adv/ring_buffer.h
+++ b/drivers/staging/batman-adv/ring_buffer.h
@@ -19,5 +19,10 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_RING_BUFFER_H_
+#define _NET_BATMAN_ADV_RING_BUFFER_H_
+
 void ring_buffer_set(uint8_t lq_recv[], uint8_t *lq_index, uint8_t value);
 uint8_t ring_buffer_avg(uint8_t lq_recv[]);
+
+#endif /* _NET_BATMAN_ADV_RING_BUFFER_H_ */
diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c
index 066dc8b3881..066cc9149bf 100644
--- a/drivers/staging/batman-adv/routing.c
+++ b/drivers/staging/batman-adv/routing.c
@@ -25,7 +25,7 @@
 #include "hash.h"
 #include "soft-interface.h"
 #include "hard-interface.h"
-#include "device.h"
+#include "icmp_socket.h"
 #include "translation-table.h"
 #include "originator.h"
 #include "types.h"
@@ -33,7 +33,7 @@
 #include "vis.h"
 #include "aggregation.h"
 
-DECLARE_WAIT_QUEUE_HEAD(thread_wait);
+static DECLARE_WAIT_QUEUE_HEAD(thread_wait);
 
 void slide_own_bcast_window(struct batman_if *batman_if)
 {
@@ -77,24 +77,27 @@ static void update_route(struct orig_node *orig_node,
 			 struct neigh_node *neigh_node,
 			 unsigned char *hna_buff, int hna_buff_len)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+
 	/* route deleted */
 	if ((orig_node->router != NULL) && (neigh_node == NULL)) {
 
-		bat_dbg(DBG_ROUTES, "Deleting route towards: %pM\n",
+		bat_dbg(DBG_ROUTES, bat_priv, "Deleting route towards: %pM\n",
 			orig_node->orig);
 		hna_global_del_orig(orig_node, "originator timed out");
 
 		/* route added */
 	} else if ((orig_node->router == NULL) && (neigh_node != NULL)) {
 
-		bat_dbg(DBG_ROUTES,
+		bat_dbg(DBG_ROUTES, bat_priv,
 			"Adding route towards: %pM (via %pM)\n",
 			orig_node->orig, neigh_node->addr);
 		hna_global_add_orig(orig_node, hna_buff, hna_buff_len);
 
 		/* route changed */
 	} else {
-		bat_dbg(DBG_ROUTES,
+		bat_dbg(DBG_ROUTES, bat_priv,
 			"Changing route towards: %pM "
 			"(now via %pM - was via %pM)\n",
 			orig_node->orig, neigh_node->addr,
@@ -120,11 +123,13 @@ void update_routes(struct orig_node *orig_node,
 		update_HNA(orig_node, hna_buff, hna_buff_len);
 }
 
-static int isBidirectionalNeigh(struct orig_node *orig_node,
+static int is_bidirectional_neigh(struct orig_node *orig_node,
 				struct orig_node *orig_neigh_node,
 				struct batman_packet *batman_packet,
 				struct batman_if *if_incoming)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
 	unsigned char total_count;
 
@@ -211,7 +216,7 @@ static int isBidirectionalNeigh(struct orig_node *orig_node,
 			      orig_neigh_node->tq_asym_penalty) /
 			     (TQ_MAX_VALUE * TQ_MAX_VALUE));
 
-	bat_dbg(DBG_BATMAN,
+	bat_dbg(DBG_BATMAN, bat_priv,
 		"bidirectional: "
 		"orig = %-15pM neigh = %-15pM => own_bcast = %2i, "
 		"real recv = %2i, local tq: %3i, asym_penalty: %3i, "
@@ -234,10 +239,12 @@ static void update_orig(struct orig_node *orig_node, struct ethhdr *ethhdr,
 			unsigned char *hna_buff, int hna_buff_len,
 			char is_duplicate)
 {
+	/* FIXME: get bat_priv */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
 	int tmp_hna_buff_len;
 
-	bat_dbg(DBG_BATMAN, "update_originator(): "
+	bat_dbg(DBG_BATMAN, bat_priv, "update_originator(): "
 		"Searching and updating originator entry of received packet\n");
 
 	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
@@ -269,7 +276,7 @@ static void update_orig(struct orig_node *orig_node, struct ethhdr *ethhdr,
 		if (!neigh_node)
 			return;
 	} else
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Updating existing last-hop neighbor of originator\n");
 
 	orig_node->flags = batman_packet->flags;
@@ -318,16 +325,19 @@ update_hna:
  *  0 if the packet is to be accepted
  *  1 if the packet is to be ignored.
  */
-static int window_protected(int16_t seq_num_diff,
+static int window_protected(int32_t seq_num_diff,
 				unsigned long *last_reset)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+
 	if ((seq_num_diff <= -TQ_LOCAL_WINDOW_SIZE)
 		|| (seq_num_diff >= EXPECTED_SEQNO_RANGE)) {
 		if (time_after(jiffies, *last_reset +
 			msecs_to_jiffies(RESET_PROTECTION_MS))) {
 
 			*last_reset = jiffies;
-			bat_dbg(DBG_BATMAN,
+			bat_dbg(DBG_BATMAN, bat_priv,
 				"old packet received, start protection\n");
 
 			return 0;
@@ -349,10 +359,12 @@ static char count_real_packets(struct ethhdr *ethhdr,
 			       struct batman_packet *batman_packet,
 			       struct batman_if *if_incoming)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct orig_node *orig_node;
 	struct neigh_node *tmp_neigh_node;
 	char is_duplicate = 0;
-	int16_t seq_diff;
+	int32_t seq_diff;
 	int need_update = 0;
 	int set_mark;
 
@@ -387,7 +399,8 @@ static char count_real_packets(struct ethhdr *ethhdr,
 	}
 
 	if (need_update) {
-		bat_dbg(DBG_BATMAN, "updating last_seqno: old %d, new %d\n",
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"updating last_seqno: old %d, new %d\n",
 			orig_node->last_real_seqno, batman_packet->seqno);
 		orig_node->last_real_seqno = batman_packet->seqno;
 	}
@@ -395,18 +408,127 @@ static char count_real_packets(struct ethhdr *ethhdr,
 	return is_duplicate;
 }
 
+/* copy primary address for bonding */
+static void mark_bonding_address(struct bat_priv *bat_priv,
+				 struct orig_node *orig_node,
+				 struct orig_node *orig_neigh_node,
+				 struct batman_packet *batman_packet)
+
+{
+	if (batman_packet->flags & PRIMARIES_FIRST_HOP)
+		memcpy(orig_neigh_node->primary_addr,
+		       orig_node->orig, ETH_ALEN);
+
+	return;
+}
+
+/* mark possible bond.candidates in the neighbor list */
+void update_bonding_candidates(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node)
+{
+	int candidates;
+	int interference_candidate;
+	int best_tq;
+	struct neigh_node *tmp_neigh_node, *tmp_neigh_node2;
+	struct neigh_node *first_candidate, *last_candidate;
+
+	/* update the candidates for this originator */
+	if (!orig_node->router) {
+		orig_node->bond.candidates = 0;
+		return;
+	}
+
+	best_tq = orig_node->router->tq_avg;
+
+	/* update bond.candidates */
+
+	candidates = 0;
+
+	/* mark other nodes which also received "PRIMARIES FIRST HOP" packets
+	 * as "bonding partner" */
+
+	/* first, zero the list */
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+		tmp_neigh_node->next_bond_candidate = NULL;
+	}
+
+	first_candidate = NULL;
+	last_candidate = NULL;
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+
+		/* only consider if it has the same primary address ...  */
+		if (memcmp(orig_node->orig,
+				tmp_neigh_node->orig_node->primary_addr,
+				ETH_ALEN) != 0)
+			continue;
+
+		/* ... and is good enough to be considered */
+		if (tmp_neigh_node->tq_avg < best_tq - BONDING_TQ_THRESHOLD)
+			continue;
+
+		/* check if we have another candidate with the same
+		 * mac address or interface. If we do, we won't
+		 * select this candidate because of possible interference. */
+
+		interference_candidate = 0;
+		list_for_each_entry(tmp_neigh_node2,
+				&orig_node->neigh_list, list) {
+
+			if (tmp_neigh_node2 == tmp_neigh_node)
+				continue;
+
+			/* we only care if the other candidate is even
+			 * considered as candidate. */
+			if (tmp_neigh_node2->next_bond_candidate == NULL)
+				continue;
+
+
+			if ((tmp_neigh_node->if_incoming ==
+				tmp_neigh_node2->if_incoming)
+				|| (memcmp(tmp_neigh_node->addr,
+				tmp_neigh_node2->addr, ETH_ALEN) == 0)) {
+
+				interference_candidate = 1;
+				break;
+			}
+		}
+		/* don't care further if it is an interference candidate */
+		if (interference_candidate)
+			continue;
+
+		if (first_candidate == NULL) {
+			first_candidate = tmp_neigh_node;
+			tmp_neigh_node->next_bond_candidate = first_candidate;
+		} else
+			tmp_neigh_node->next_bond_candidate = last_candidate;
+
+		last_candidate = tmp_neigh_node;
+
+		candidates++;
+	}
+
+	if (candidates > 0) {
+		first_candidate->next_bond_candidate = last_candidate;
+		orig_node->bond.selected = first_candidate;
+	}
+
+	orig_node->bond.candidates = candidates;
+}
+
 void receive_bat_packet(struct ethhdr *ethhdr,
 				struct batman_packet *batman_packet,
 				unsigned char *hna_buff, int hna_buff_len,
 				struct batman_if *if_incoming)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct batman_if *batman_if;
 	struct orig_node *orig_neigh_node, *orig_node;
 	char has_directlink_flag;
 	char is_my_addr = 0, is_my_orig = 0, is_my_oldorig = 0;
 	char is_broadcast = 0, is_bidirectional, is_single_hop_neigh;
 	char is_duplicate;
-	unsigned short if_incoming_seqno;
+	uint32_t if_incoming_seqno;
 
 	/* Silently drop when the batman packet is actually not a
 	 * correct packet.
@@ -431,7 +553,8 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	is_single_hop_neigh = (compare_orig(ethhdr->h_source,
 					    batman_packet->orig) ? 1 : 0);
 
-	bat_dbg(DBG_BATMAN, "Received BATMAN packet via NB: %pM, IF: %s [%s] "
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Received BATMAN packet via NB: %pM, IF: %s [%s] "
 		"(from OG: %pM, via prev OG: %pM, seqno %d, tq %d, "
 		"TTL %d, V %d, IDF %d)\n",
 		ethhdr->h_source, if_incoming->dev, if_incoming->addr_str,
@@ -455,19 +578,19 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 				 batman_if->net_dev->dev_addr))
 			is_my_oldorig = 1;
 
-		if (compare_orig(ethhdr->h_source, broadcastAddr))
+		if (compare_orig(ethhdr->h_source, broadcast_addr))
 			is_broadcast = 1;
 	}
 
 	if (batman_packet->version != COMPAT_VERSION) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: incompatible batman version (%i)\n",
 			batman_packet->version);
 		return;
 	}
 
 	if (is_my_addr) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: received my own broadcast (sender: %pM"
 			")\n",
 			ethhdr->h_source);
@@ -475,7 +598,7 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	}
 
 	if (is_broadcast) {
-		bat_dbg(DBG_BATMAN, "Drop packet: "
+		bat_dbg(DBG_BATMAN, bat_priv, "Drop packet: "
 		"ignoring all packets with broadcast source addr (sender: %pM"
 		")\n", ethhdr->h_source);
 		return;
@@ -505,13 +628,13 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 				bit_packet_count(word);
 		}
 
-		bat_dbg(DBG_BATMAN, "Drop packet: "
+		bat_dbg(DBG_BATMAN, bat_priv, "Drop packet: "
 			"originator packet from myself (via neighbor)\n");
 		return;
 	}
 
 	if (is_my_oldorig) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: ignoring all rebroadcast echos (sender: "
 			"%pM)\n", ethhdr->h_source);
 		return;
@@ -524,14 +647,14 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	is_duplicate = count_real_packets(ethhdr, batman_packet, if_incoming);
 
 	if (is_duplicate == -1) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: packet within seqno protection time "
 			"(sender: %pM)\n", ethhdr->h_source);
 		return;
 	}
 
 	if (batman_packet->tq == 0) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: originator packet with tq equal 0\n");
 		return;
 	}
@@ -544,7 +667,7 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	    !(compare_orig(batman_packet->orig, batman_packet->prev_sender)) &&
 	    (compare_orig(orig_node->router->addr,
 			  orig_node->router->orig_node->router->addr))) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: ignoring all rebroadcast packets that "
 			"may make me loop (sender: %pM)\n", ethhdr->h_source);
 		return;
@@ -561,11 +684,12 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 	 * don't route towards it */
 	if (!is_single_hop_neigh &&
 	    (orig_neigh_node->router == NULL)) {
-		bat_dbg(DBG_BATMAN, "Drop packet: OGM via unknown neighbor!\n");
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: OGM via unknown neighbor!\n");
 		return;
 	}
 
-	is_bidirectional = isBidirectionalNeigh(orig_node, orig_neigh_node,
+	is_bidirectional = is_bidirectional_neigh(orig_node, orig_neigh_node,
 						batman_packet, if_incoming);
 
 	/* update ranking if it is not a duplicate or has the same
@@ -577,6 +701,10 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 		update_orig(orig_node, ethhdr, batman_packet,
 			    if_incoming, hna_buff, hna_buff_len, is_duplicate);
 
+	mark_bonding_address(bat_priv, orig_node,
+			     orig_neigh_node, batman_packet);
+	update_bonding_candidates(bat_priv, orig_node);
+
 	/* is single hop (direct) neighbor */
 	if (is_single_hop_neigh) {
 
@@ -584,24 +712,25 @@ void receive_bat_packet(struct ethhdr *ethhdr,
 		schedule_forward_packet(orig_node, ethhdr, batman_packet,
 					1, hna_buff_len, if_incoming);
 
-		bat_dbg(DBG_BATMAN, "Forwarding packet: "
+		bat_dbg(DBG_BATMAN, bat_priv, "Forwarding packet: "
 			"rebroadcast neighbor packet with direct link flag\n");
 		return;
 	}
 
 	/* multihop originator */
 	if (!is_bidirectional) {
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"Drop packet: not received via bidirectional link\n");
 		return;
 	}
 
 	if (is_duplicate) {
-		bat_dbg(DBG_BATMAN, "Drop packet: duplicate packet received\n");
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: duplicate packet received\n");
 		return;
 	}
 
-	bat_dbg(DBG_BATMAN,
+	bat_dbg(DBG_BATMAN, bat_priv,
 		"Forwarding packet: rebroadcast originator packet\n");
 	schedule_forward_packet(orig_node, ethhdr, batman_packet,
 				0, hna_buff_len, if_incoming);
@@ -652,10 +781,10 @@ int recv_bat_packet(struct sk_buff *skb,
 	return NET_RX_SUCCESS;
 }
 
-static int recv_my_icmp_packet(struct sk_buff *skb)
+static int recv_my_icmp_packet(struct sk_buff *skb, size_t icmp_len)
 {
 	struct orig_node *orig_node;
-	struct icmp_packet *icmp_packet;
+	struct icmp_packet_rr *icmp_packet;
 	struct ethhdr *ethhdr;
 	struct sk_buff *skb_old;
 	struct batman_if *batman_if;
@@ -663,12 +792,12 @@ static int recv_my_icmp_packet(struct sk_buff *skb)
 	unsigned long flags;
 	uint8_t dstaddr[ETH_ALEN];
 
-	icmp_packet = (struct icmp_packet *)skb->data;
+	icmp_packet = (struct icmp_packet_rr *)skb->data;
 	ethhdr = (struct ethhdr *)skb_mac_header(skb);
 
 	/* add data to device queue */
 	if (icmp_packet->msg_type != ECHO_REQUEST) {
-		bat_device_receive_packet(icmp_packet);
+		bat_socket_receive_packet(icmp_packet, icmp_len);
 		return NET_RX_DROP;
 	}
 
@@ -690,13 +819,12 @@ static int recv_my_icmp_packet(struct sk_buff *skb)
 
 		/* create a copy of the skb, if needed, to modify it. */
 		skb_old = NULL;
-		if (!skb_clone_writable(skb, sizeof(struct icmp_packet))) {
+		if (!skb_clone_writable(skb, icmp_len)) {
 			skb_old = skb;
 			skb = skb_copy(skb, GFP_ATOMIC);
 			if (!skb)
 				return NET_RX_DROP;
-
-			icmp_packet = (struct icmp_packet *)skb->data;
+			icmp_packet = (struct icmp_packet_rr *)skb->data;
 			ethhdr = (struct ethhdr *)skb_mac_header(skb);
 			kfree_skb(skb_old);
 		}
@@ -715,7 +843,7 @@ static int recv_my_icmp_packet(struct sk_buff *skb)
 	return ret;
 }
 
-static int recv_icmp_ttl_exceeded(struct sk_buff *skb)
+static int recv_icmp_ttl_exceeded(struct sk_buff *skb, size_t icmp_len)
 {
 	struct orig_node *orig_node;
 	struct icmp_packet *icmp_packet;
@@ -731,10 +859,9 @@ static int recv_icmp_ttl_exceeded(struct sk_buff *skb)
 
 	/* send TTL exceeded if packet is an echo request (traceroute) */
 	if (icmp_packet->msg_type != ECHO_REQUEST) {
-		printk(KERN_WARNING "batman-adv:"
-		       "Warning - can't forward icmp packet from %pM to %pM: "
-		       "ttl exceeded\n",
-		       icmp_packet->orig, icmp_packet->dst);
+		pr_warning("Warning - can't forward icmp packet from %pM to "
+			   "%pM: ttl exceeded\n", icmp_packet->orig,
+			   icmp_packet->dst);
 		return NET_RX_DROP;
 	}
 
@@ -754,7 +881,7 @@ static int recv_icmp_ttl_exceeded(struct sk_buff *skb)
 		spin_unlock_irqrestore(&orig_hash_lock, flags);
 
 		/* create a copy of the skb, if needed, to modify it. */
-		if (!skb_clone_writable(skb, sizeof(struct icmp_packet))) {
+		if (!skb_clone_writable(skb, icmp_len)) {
 			skb_old = skb;
 			skb = skb_copy(skb, GFP_ATOMIC);
 			if (!skb)
@@ -781,7 +908,7 @@ static int recv_icmp_ttl_exceeded(struct sk_buff *skb)
 
 int recv_icmp_packet(struct sk_buff *skb)
 {
-	struct icmp_packet *icmp_packet;
+	struct icmp_packet_rr *icmp_packet;
 	struct ethhdr *ethhdr;
 	struct orig_node *orig_node;
 	struct sk_buff *skb_old;
@@ -791,6 +918,12 @@ int recv_icmp_packet(struct sk_buff *skb)
 	unsigned long flags;
 	uint8_t dstaddr[ETH_ALEN];
 
+	/**
+	 * we truncate all incoming icmp packets if they don't match our size
+	 */
+	if (skb_headlen(skb) >= sizeof(struct icmp_packet_rr))
+		hdr_size = sizeof(struct icmp_packet_rr);
+
 	/* drop packet if it has not necessary minimum size */
 	if (skb_headlen(skb) < hdr_size)
 		return NET_RX_DROP;
@@ -809,15 +942,23 @@ int recv_icmp_packet(struct sk_buff *skb)
 	if (!is_my_mac(ethhdr->h_dest))
 		return NET_RX_DROP;
 
-	icmp_packet = (struct icmp_packet *)skb->data;
+	icmp_packet = (struct icmp_packet_rr *)skb->data;
+
+	/* add record route information if not full */
+	if ((hdr_size == sizeof(struct icmp_packet_rr)) &&
+	    (icmp_packet->rr_cur < BAT_RR_LEN)) {
+		memcpy(&(icmp_packet->rr[icmp_packet->rr_cur]),
+			ethhdr->h_dest, ETH_ALEN);
+		icmp_packet->rr_cur++;
+	}
 
 	/* packet for me */
 	if (is_my_mac(icmp_packet->dst))
-		return recv_my_icmp_packet(skb);
+		return recv_my_icmp_packet(skb, hdr_size);
 
 	/* TTL exceeded */
 	if (icmp_packet->ttl < 2)
-		return recv_icmp_ttl_exceeded(skb);
+		return recv_icmp_ttl_exceeded(skb, hdr_size);
 
 	ret = NET_RX_DROP;
 
@@ -836,12 +977,12 @@ int recv_icmp_packet(struct sk_buff *skb)
 		spin_unlock_irqrestore(&orig_hash_lock, flags);
 
 		/* create a copy of the skb, if needed, to modify it. */
-		if (!skb_clone_writable(skb, sizeof(struct icmp_packet))) {
+		if (!skb_clone_writable(skb, hdr_size)) {
 			skb_old = skb;
 			skb = skb_copy(skb, GFP_ATOMIC);
 			if (!skb)
 				return NET_RX_DROP;
-			icmp_packet = (struct icmp_packet *)skb->data;
+			icmp_packet = (struct icmp_packet_rr *)skb->data;
 			ethhdr = (struct ethhdr *)skb_mac_header(skb);
 			kfree_skb(skb_old);
 		}
@@ -859,16 +1000,109 @@ int recv_icmp_packet(struct sk_buff *skb)
 	return ret;
 }
 
-int recv_unicast_packet(struct sk_buff *skb)
+/* find a suitable router for this originator, and use
+ * bonding if possible. */
+struct neigh_node *find_router(struct orig_node *orig_node,
+		struct batman_if *recv_if)
+{
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+	struct orig_node *primary_orig_node;
+	struct orig_node *router_orig;
+	struct neigh_node *router, *first_candidate, *best_router;
+	static uint8_t zero_mac[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
+	int bonding_enabled;
+
+	if (!orig_node)
+		return NULL;
+
+	if (!orig_node->router)
+		return NULL;
+
+	/* without bonding, the first node should
+	 * always choose the default router. */
+
+	bonding_enabled = atomic_read(&bat_priv->bonding_enabled);
+	if (!bonding_enabled && (recv_if == NULL))
+			return orig_node->router;
+
+	router_orig = orig_node->router->orig_node;
+
+	/* if we have something in the primary_addr, we can search
+	 * for a potential bonding candidate. */
+	if (memcmp(router_orig->primary_addr, zero_mac, ETH_ALEN) == 0)
+		return orig_node->router;
+
+	/* find the orig_node which has the primary interface. might
+	 * even be the same as our router_orig in many cases */
+
+	if (memcmp(router_orig->primary_addr,
+				router_orig->orig, ETH_ALEN) == 0) {
+		primary_orig_node = router_orig;
+	} else {
+		primary_orig_node = hash_find(orig_hash,
+						router_orig->primary_addr);
+		if (!primary_orig_node)
+			return orig_node->router;
+	}
+
+	/* with less than 2 candidates, we can't do any
+	 * bonding and prefer the original router. */
+
+	if (primary_orig_node->bond.candidates < 2)
+		return orig_node->router;
+
+
+	/* all nodes between should choose a candidate which
+	 * is is not on the interface where the packet came
+	 * in. */
+	first_candidate = primary_orig_node->bond.selected;
+	router = first_candidate;
+
+	if (bonding_enabled) {
+		/* in the bonding case, send the packets in a round
+		 * robin fashion over the remaining interfaces. */
+		do {
+			/* recv_if == NULL on the first node. */
+			if (router->if_incoming != recv_if)
+				break;
+
+			router = router->next_bond_candidate;
+		} while (router != first_candidate);
+
+		primary_orig_node->bond.selected = router->next_bond_candidate;
+
+	} else {
+		/* if bonding is disabled, use the best of the
+		 * remaining candidates which are not using
+		 * this interface. */
+		best_router = first_candidate;
+
+		do {
+			/* recv_if == NULL on the first node. */
+			if ((router->if_incoming != recv_if) &&
+				(router->tq_avg > best_router->tq_avg))
+					best_router = router;
+
+			router = router->next_bond_candidate;
+		} while (router != first_candidate);
+
+		router = best_router;
+	}
+
+	return router;
+}
+
+int recv_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if)
 {
 	struct unicast_packet *unicast_packet;
 	struct orig_node *orig_node;
+	struct neigh_node *router;
 	struct ethhdr *ethhdr;
 	struct batman_if *batman_if;
 	struct sk_buff *skb_old;
 	uint8_t dstaddr[ETH_ALEN];
 	int hdr_size = sizeof(struct unicast_packet);
-	int ret;
 	unsigned long flags;
 
 	/* drop packet if it has not necessary minimum size */
@@ -899,49 +1133,50 @@ int recv_unicast_packet(struct sk_buff *skb)
 
 	/* TTL exceeded */
 	if (unicast_packet->ttl < 2) {
-		printk(KERN_WARNING "batman-adv:Warning - "
-		       "can't forward unicast packet from %pM to %pM: "
-		       "ttl exceeded\n",
-		       ethhdr->h_source, unicast_packet->dest);
+		pr_warning("Warning - can't forward unicast packet from %pM to "
+			   "%pM: ttl exceeded\n", ethhdr->h_source,
+			   unicast_packet->dest);
 		return NET_RX_DROP;
 	}
 
-	ret = NET_RX_DROP;
 	/* get routing information */
 	spin_lock_irqsave(&orig_hash_lock, flags);
 	orig_node = ((struct orig_node *)
 		     hash_find(orig_hash, unicast_packet->dest));
 
-	if ((orig_node != NULL) &&
-	    (orig_node->router != NULL)) {
+	router = find_router(orig_node, recv_if);
 
-		/* don't lock while sending the packets ... we therefore
-		 * copy the required data before sending */
-		batman_if = orig_node->router->if_incoming;
-		memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+	if (!router) {
 		spin_unlock_irqrestore(&orig_hash_lock, flags);
+		return NET_RX_DROP;
+	}
 
-		/* create a copy of the skb, if needed, to modify it. */
-		if (!skb_clone_writable(skb, sizeof(struct unicast_packet))) {
-			skb_old = skb;
-			skb = skb_copy(skb, GFP_ATOMIC);
-			if (!skb)
-				return NET_RX_DROP;
-			unicast_packet = (struct unicast_packet *)skb->data;
-			ethhdr = (struct ethhdr *)skb_mac_header(skb);
-			kfree_skb(skb_old);
-		}
-		/* decrement ttl */
-		unicast_packet->ttl--;
+	/* don't lock while sending the packets ... we therefore
+	 * copy the required data before sending */
 
-		/* route it */
-		send_skb_packet(skb, batman_if, dstaddr);
-		ret = NET_RX_SUCCESS;
+	batman_if = router->if_incoming;
+	memcpy(dstaddr, router->addr, ETH_ALEN);
 
-	} else
-		spin_unlock_irqrestore(&orig_hash_lock, flags);
+	spin_unlock_irqrestore(&orig_hash_lock, flags);
 
-	return ret;
+	/* create a copy of the skb, if needed, to modify it. */
+	if (!skb_clone_writable(skb, sizeof(struct unicast_packet))) {
+		skb_old = skb;
+		skb = skb_copy(skb, GFP_ATOMIC);
+		if (!skb)
+			return NET_RX_DROP;
+		unicast_packet = (struct unicast_packet *) skb->data;
+		ethhdr = (struct ethhdr *)skb_mac_header(skb);
+		kfree_skb(skb_old);
+	}
+
+	/* decrement ttl */
+	unicast_packet->ttl--;
+
+	/* route it */
+	send_skb_packet(skb, batman_if, dstaddr);
+
+	return NET_RX_SUCCESS;
 }
 
 int recv_bcast_packet(struct sk_buff *skb)
@@ -950,7 +1185,7 @@ int recv_bcast_packet(struct sk_buff *skb)
 	struct bcast_packet *bcast_packet;
 	struct ethhdr *ethhdr;
 	int hdr_size = sizeof(struct bcast_packet);
-	int16_t seq_diff;
+	int32_t seq_diff;
 	unsigned long flags;
 
 	/* drop packet if it has not necessary minimum size */
@@ -977,6 +1212,9 @@ int recv_bcast_packet(struct sk_buff *skb)
 	if (is_my_mac(bcast_packet->orig))
 		return NET_RX_DROP;
 
+	if (bcast_packet->ttl < 2)
+		return NET_RX_DROP;
+
 	spin_lock_irqsave(&orig_hash_lock, flags);
 	orig_node = ((struct orig_node *)
 		     hash_find(orig_hash, bcast_packet->orig));
@@ -989,12 +1227,12 @@ int recv_bcast_packet(struct sk_buff *skb)
 	/* check whether the packet is a duplicate */
 	if (get_bit_status(orig_node->bcast_bits,
 			   orig_node->last_bcast_seqno,
-			   ntohs(bcast_packet->seqno))) {
+			   ntohl(bcast_packet->seqno))) {
 		spin_unlock_irqrestore(&orig_hash_lock, flags);
 		return NET_RX_DROP;
 	}
 
-	seq_diff = ntohs(bcast_packet->seqno) - orig_node->last_bcast_seqno;
+	seq_diff = ntohl(bcast_packet->seqno) - orig_node->last_bcast_seqno;
 
 	/* check whether the packet is old and the host just restarted. */
 	if (window_protected(seq_diff, &orig_node->bcast_seqno_reset)) {
@@ -1005,7 +1243,7 @@ int recv_bcast_packet(struct sk_buff *skb)
 	/* mark broadcast in flood history, update window position
 	 * if required. */
 	if (bit_get_packet(orig_node->bcast_bits, seq_diff, 1))
-		orig_node->last_bcast_seqno = ntohs(bcast_packet->seqno);
+		orig_node->last_bcast_seqno = ntohl(bcast_packet->seqno);
 
 	spin_unlock_irqrestore(&orig_hash_lock, flags);
 	/* rebroadcast packet */
diff --git a/drivers/staging/batman-adv/routing.h b/drivers/staging/batman-adv/routing.h
index 8288decea37..3eac64e3cf9 100644
--- a/drivers/staging/batman-adv/routing.h
+++ b/drivers/staging/batman-adv/routing.h
@@ -19,9 +19,10 @@
  *
  */
 
-#include "types.h"
+#ifndef _NET_BATMAN_ADV_ROUTING_H_
+#define _NET_BATMAN_ADV_ROUTING_H_
 
-extern wait_queue_head_t thread_wait;
+#include "types.h"
 
 void slide_own_bcast_window(struct batman_if *batman_if);
 void receive_bat_packet(struct ethhdr *ethhdr,
@@ -32,8 +33,14 @@ void update_routes(struct orig_node *orig_node,
 				struct neigh_node *neigh_node,
 				unsigned char *hna_buff, int hna_buff_len);
 int recv_icmp_packet(struct sk_buff *skb);
-int recv_unicast_packet(struct sk_buff *skb);
+int recv_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_bcast_packet(struct sk_buff *skb);
 int recv_vis_packet(struct sk_buff *skb);
 int recv_bat_packet(struct sk_buff *skb,
 				struct batman_if *batman_if);
+struct neigh_node *find_router(struct orig_node *orig_node,
+		struct batman_if *recv_if);
+void update_bonding_candidates(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node);
+
+#endif /* _NET_BATMAN_ADV_ROUTING_H_ */
diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c
index ac69ed871a7..055edee7b4e 100644
--- a/drivers/staging/batman-adv/send.c
+++ b/drivers/staging/batman-adv/send.c
@@ -29,6 +29,10 @@
 #include "vis.h"
 #include "aggregation.h"
 
+#include <linux/netfilter_bridge.h>
+
+static void send_outstanding_bcast_packet(struct work_struct *work);
+
 /* apply hop penalty for a normal link */
 static uint8_t hop_penalty(const uint8_t tq)
 {
@@ -38,15 +42,15 @@ static uint8_t hop_penalty(const uint8_t tq)
 /* when do we schedule our own packet to be sent */
 static unsigned long own_send_time(struct bat_priv *bat_priv)
 {
-	return jiffies +
-		(((atomic_read(&bat_priv->orig_interval) - JITTER +
-		   (random32() % 2*JITTER)) * HZ) / 1000);
+	return jiffies + msecs_to_jiffies(
+		   atomic_read(&bat_priv->orig_interval) -
+		   JITTER + (random32() % 2*JITTER));
 }
 
 /* when do we schedule a forwarded packet to be sent */
 static unsigned long forward_send_time(struct bat_priv *bat_priv)
 {
-	return jiffies + (((random32() % (JITTER/2)) * HZ) / 1000);
+	return jiffies + msecs_to_jiffies(random32() % (JITTER/2));
 }
 
 /* send out an already prepared packet to the given address via the
@@ -64,10 +68,8 @@ int send_skb_packet(struct sk_buff *skb,
 		goto send_skb_err;
 
 	if (!(batman_if->net_dev->flags & IFF_UP)) {
-		printk(KERN_WARNING
-		       "batman-adv:Interface %s "
-		       "is not up - can't send packet via that interface!\n",
-		       batman_if->dev);
+		pr_warning("Interface %s is not up - can't send packet via "
+			   "that interface!\n", batman_if->dev);
 		goto send_skb_err;
 	}
 
@@ -90,9 +92,12 @@ int send_skb_packet(struct sk_buff *skb,
 
 	/* dev_queue_xmit() returns a negative result on error.	 However on
 	 * congestion and traffic shaping, it drops and returns NET_XMIT_DROP
-	 * (which is > 0). This will not be treated as an error. */
+	 * (which is > 0). This will not be treated as an error.
+	 * Also, if netfilter/ebtables wants to block outgoing batman
+	 * packets then giving them a chance to do so here */
 
-	return dev_queue_xmit(skb);
+	return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
+		       dev_queue_xmit);
 send_skb_err:
 	kfree_skb(skb);
 	return NET_XMIT_DROP;
@@ -119,6 +124,8 @@ void send_raw_packet(unsigned char *pack_buff, int pack_buff_len,
 static void send_packet_to_if(struct forw_packet *forw_packet,
 			      struct batman_if *batman_if)
 {
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	char *fwd_str;
 	uint8_t packet_num;
 	int16_t buff_pos;
@@ -148,11 +155,11 @@ static void send_packet_to_if(struct forw_packet *forw_packet,
 		fwd_str = (packet_num > 0 ? "Forwarding" : (forw_packet->own ?
 							    "Sending own" :
 							    "Forwarding"));
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"%s %spacket (originator %pM, seqno %d, TQ %d, TTL %d,"
 			" IDF %s) on interface %s [%s]\n",
 			fwd_str, (packet_num > 0 ? "aggregated " : ""),
-			batman_packet->orig, ntohs(batman_packet->seqno),
+			batman_packet->orig, ntohl(batman_packet->seqno),
 			batman_packet->tq, batman_packet->ttl,
 			(batman_packet->flags & DIRECTLINK ?
 			 "on" : "off"),
@@ -167,20 +174,22 @@ static void send_packet_to_if(struct forw_packet *forw_packet,
 
 	send_raw_packet(forw_packet->packet_buff,
 			forw_packet->packet_len,
-			batman_if, broadcastAddr);
+			batman_if, broadcast_addr);
 }
 
 /* send a batman packet */
 static void send_packet(struct forw_packet *forw_packet)
 {
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct batman_if *batman_if;
 	struct batman_packet *batman_packet =
 		(struct batman_packet *)(forw_packet->packet_buff);
 	unsigned char directlink = (batman_packet->flags & DIRECTLINK ? 1 : 0);
 
 	if (!forw_packet->if_incoming) {
-		printk(KERN_ERR "batman-adv: Error - can't forward packet: "
-		       "incoming iface not specified\n");
+		pr_err("Error - can't forward packet: incoming iface not "
+		       "specified\n");
 		return;
 	}
 
@@ -193,18 +202,18 @@ static void send_packet(struct forw_packet *forw_packet)
 	    (forw_packet->own && (forw_packet->if_incoming->if_num > 0))) {
 
 		/* FIXME: what about aggregated packets ? */
-		bat_dbg(DBG_BATMAN,
+		bat_dbg(DBG_BATMAN, bat_priv,
 			"%s packet (originator %pM, seqno %d, TTL %d) "
 			"on interface %s [%s]\n",
 			(forw_packet->own ? "Sending own" : "Forwarding"),
-			batman_packet->orig, ntohs(batman_packet->seqno),
+			batman_packet->orig, ntohl(batman_packet->seqno),
 			batman_packet->ttl, forw_packet->if_incoming->dev,
 			forw_packet->if_incoming->addr_str);
 
 		send_raw_packet(forw_packet->packet_buff,
 				forw_packet->packet_len,
 				forw_packet->if_incoming,
-				broadcastAddr);
+				broadcast_addr);
 		return;
 	}
 
@@ -276,14 +285,14 @@ void schedule_own_packet(struct batman_if *batman_if)
 	batman_packet = (struct batman_packet *)batman_if->packet_buff;
 
 	/* change sequence number to network order */
-	batman_packet->seqno = htons((uint16_t)atomic_read(&batman_if->seqno));
+	batman_packet->seqno =
+		htonl((uint32_t)atomic_read(&batman_if->seqno));
 
 	if (vis_server == VIS_TYPE_SERVER_SYNC)
-		batman_packet->flags = VIS_SERVER;
+		batman_packet->flags |= VIS_SERVER;
 	else
 		batman_packet->flags &= ~VIS_SERVER;
 
-	/* could be read by receive_bat_packet() */
 	atomic_inc(&batman_if->seqno);
 
 	slide_own_bcast_window(batman_if);
@@ -306,7 +315,7 @@ void schedule_forward_packet(struct orig_node *orig_node,
 	unsigned long send_time;
 
 	if (batman_packet->ttl <= 1) {
-		bat_dbg(DBG_BATMAN, "ttl exceeded\n");
+		bat_dbg(DBG_BATMAN, bat_priv, "ttl exceeded\n");
 		return;
 	}
 
@@ -335,13 +344,16 @@ void schedule_forward_packet(struct orig_node *orig_node,
 	/* apply hop penalty */
 	batman_packet->tq = hop_penalty(batman_packet->tq);
 
-	bat_dbg(DBG_BATMAN, "Forwarding packet: tq_orig: %i, tq_avg: %i, "
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Forwarding packet: tq_orig: %i, tq_avg: %i, "
 		"tq_forw: %i, ttl_orig: %i, ttl_forw: %i\n",
 		in_tq, tq_avg, batman_packet->tq, in_ttl - 1,
 		batman_packet->ttl);
 
-	batman_packet->seqno = htons(batman_packet->seqno);
+	batman_packet->seqno = htonl(batman_packet->seqno);
 
+	/* switch of primaries first hop flag when forwarding */
+	batman_packet->flags &= ~PRIMARIES_FIRST_HOP;
 	if (directlink)
 		batman_packet->flags |= DIRECTLINK;
 	else
@@ -392,9 +404,12 @@ static void _add_bcast_packet_to_list(struct forw_packet *forw_packet,
 int add_bcast_packet_to_list(struct sk_buff *skb)
 {
 	struct forw_packet *forw_packet;
+	struct bcast_packet *bcast_packet;
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 
 	if (!atomic_dec_not_zero(&bcast_queue_left)) {
-		bat_dbg(DBG_BATMAN, "bcast packet queue full\n");
+		bat_dbg(DBG_BATMAN, bat_priv, "bcast packet queue full\n");
 		goto out;
 	}
 
@@ -407,6 +422,10 @@ int add_bcast_packet_to_list(struct sk_buff *skb)
 	if (!skb)
 		goto packet_free;
 
+	/* as we have a copy now, it is safe to decrease the TTL */
+	bcast_packet = (struct bcast_packet *)skb->data;
+	bcast_packet->ttl--;
+
 	skb_reset_mac_header(skb);
 
 	forw_packet->skb = skb;
@@ -426,7 +445,7 @@ out:
 	return NETDEV_TX_BUSY;
 }
 
-void send_outstanding_bcast_packet(struct work_struct *work)
+static void send_outstanding_bcast_packet(struct work_struct *work)
 {
 	struct batman_if *batman_if;
 	struct delayed_work *delayed_work =
@@ -450,7 +469,7 @@ void send_outstanding_bcast_packet(struct work_struct *work)
 		skb1 = skb_copy(forw_packet->skb, GFP_ATOMIC);
 		if (skb1)
 			send_skb_packet(skb1,
-				batman_if, broadcastAddr);
+				batman_if, broadcast_addr);
 	}
 	rcu_read_unlock();
 
@@ -502,15 +521,19 @@ out:
 
 void purge_outstanding_packets(struct batman_if *batman_if)
 {
+	/* FIXME: each batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct forw_packet *forw_packet;
 	struct hlist_node *tmp_node, *safe_tmp_node;
 	unsigned long flags;
 
 	if (batman_if)
-		bat_dbg(DBG_BATMAN, "purge_outstanding_packets(): %s\n",
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"purge_outstanding_packets(): %s\n",
 			batman_if->dev);
 	else
-		bat_dbg(DBG_BATMAN, "purge_outstanding_packets()\n");
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"purge_outstanding_packets()\n");
 
 	/* free bcast list */
 	spin_lock_irqsave(&forw_bcast_list_lock, flags);
diff --git a/drivers/staging/batman-adv/send.h b/drivers/staging/batman-adv/send.h
index feaa2fc7f9a..b64c62783fe 100644
--- a/drivers/staging/batman-adv/send.h
+++ b/drivers/staging/batman-adv/send.h
@@ -19,9 +19,11 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_SEND_H_
+#define _NET_BATMAN_ADV_SEND_H_
+
 #include "types.h"
 
-void send_own_packet_work(struct work_struct *work);
 int send_skb_packet(struct sk_buff *skb,
 				struct batman_if *batman_if,
 				uint8_t *dst_addr);
@@ -34,6 +36,7 @@ void schedule_forward_packet(struct orig_node *orig_node,
 			     uint8_t directlink, int hna_buff_len,
 			     struct batman_if *if_outgoing);
 int  add_bcast_packet_to_list(struct sk_buff *skb);
-void send_outstanding_bcast_packet(struct work_struct *work);
 void send_outstanding_bat_packet(struct work_struct *work);
 void purge_outstanding_packets(struct batman_if *batman_if);
+
+#endif /* _NET_BATMAN_ADV_SEND_H_ */
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c
index 51c40b77c8d..2ea97de435c 100644
--- a/drivers/staging/batman-adv/soft-interface.c
+++ b/drivers/staging/batman-adv/soft-interface.c
@@ -22,6 +22,7 @@
 #include "main.h"
 #include "soft-interface.h"
 #include "hard-interface.h"
+#include "routing.h"
 #include "send.h"
 #include "translation-table.h"
 #include "types.h"
@@ -30,13 +31,12 @@
 #include <linux/ethtool.h>
 #include <linux/etherdevice.h>
 
-static uint16_t bcast_seqno = 1; /* give own bcast messages seq numbers to avoid
+static uint32_t bcast_seqno = 1; /* give own bcast messages seq numbers to avoid
 				  * broadcast storms */
 static int32_t skb_packets;
 static int32_t skb_bad_packets;
 
-unsigned char mainIfAddr[ETH_ALEN];
-static unsigned char mainIfAddr_default[ETH_ALEN];
+unsigned char main_if_addr[ETH_ALEN];
 static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
 static void bat_get_drvinfo(struct net_device *dev,
 			    struct ethtool_drvinfo *info);
@@ -58,12 +58,7 @@ static const struct ethtool_ops bat_ethtool_ops = {
 
 void set_main_if_addr(uint8_t *addr)
 {
-	memcpy(mainIfAddr, addr, ETH_ALEN);
-}
-
-int main_if_was_up(void)
-{
-	return (memcmp(mainIfAddr, mainIfAddr_default, ETH_ALEN) != 0 ? 1 : 0);
+	memcpy(main_if_addr, addr, ETH_ALEN);
 }
 
 int my_skb_push(struct sk_buff *skb, unsigned int len)
@@ -83,69 +78,25 @@ int my_skb_push(struct sk_buff *skb, unsigned int len)
 	return 0;
 }
 
-#ifdef HAVE_NET_DEVICE_OPS
-static const struct net_device_ops bat_netdev_ops = {
-	.ndo_open = interface_open,
-	.ndo_stop = interface_release,
-	.ndo_get_stats = interface_stats,
-	.ndo_set_mac_address = interface_set_mac_addr,
-	.ndo_change_mtu = interface_change_mtu,
-	.ndo_start_xmit = interface_tx,
-	.ndo_validate_addr = eth_validate_addr
-};
-#endif
-
-void interface_setup(struct net_device *dev)
-{
-	struct bat_priv *priv = netdev_priv(dev);
-	char dev_addr[ETH_ALEN];
-
-	ether_setup(dev);
-
-#ifdef HAVE_NET_DEVICE_OPS
-	dev->netdev_ops = &bat_netdev_ops;
-#else
-	dev->open = interface_open;
-	dev->stop = interface_release;
-	dev->get_stats = interface_stats;
-	dev->set_mac_address = interface_set_mac_addr;
-	dev->change_mtu = interface_change_mtu;
-	dev->hard_start_xmit = interface_tx;
-#endif
-	dev->destructor = free_netdev;
-
-	dev->mtu = hardif_min_mtu();
-	dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
-						* skbuff for our header */
-
-	/* generate random address */
-	random_ether_addr(dev_addr);
-	memcpy(dev->dev_addr, dev_addr, ETH_ALEN);
-
-	SET_ETHTOOL_OPS(dev, &bat_ethtool_ops);
-
-	memset(priv, 0, sizeof(struct bat_priv));
-}
-
-int interface_open(struct net_device *dev)
+static int interface_open(struct net_device *dev)
 {
 	netif_start_queue(dev);
 	return 0;
 }
 
-int interface_release(struct net_device *dev)
+static int interface_release(struct net_device *dev)
 {
 	netif_stop_queue(dev);
 	return 0;
 }
 
-struct net_device_stats *interface_stats(struct net_device *dev)
+static struct net_device_stats *interface_stats(struct net_device *dev)
 {
 	struct bat_priv *priv = netdev_priv(dev);
 	return &priv->stats;
 }
 
-int interface_set_mac_addr(struct net_device *dev, void *p)
+static int interface_set_mac_addr(struct net_device *dev, void *p)
 {
 	struct sockaddr *addr = p;
 
@@ -163,7 +114,7 @@ int interface_set_mac_addr(struct net_device *dev, void *p)
 	return 0;
 }
 
-int interface_change_mtu(struct net_device *dev, int new_mtu)
+static int interface_change_mtu(struct net_device *dev, int new_mtu)
 {
 	/* check ranges */
 	if ((new_mtu < 68) || (new_mtu > hardif_min_mtu()))
@@ -179,6 +130,7 @@ int interface_tx(struct sk_buff *skb, struct net_device *dev)
 	struct unicast_packet *unicast_packet;
 	struct bcast_packet *bcast_packet;
 	struct orig_node *orig_node;
+	struct neigh_node *router;
 	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
 	struct bat_priv *priv = netdev_priv(dev);
 	struct batman_if *batman_if;
@@ -205,16 +157,17 @@ int interface_tx(struct sk_buff *skb, struct net_device *dev)
 
 		bcast_packet = (struct bcast_packet *)skb->data;
 		bcast_packet->version = COMPAT_VERSION;
+		bcast_packet->ttl = TTL;
 
 		/* batman packet type: broadcast */
 		bcast_packet->packet_type = BAT_BCAST;
 
 		/* hw address of first interface is the orig mac because only
 		 * this mac is known throughout the mesh */
-		memcpy(bcast_packet->orig, mainIfAddr, ETH_ALEN);
+		memcpy(bcast_packet->orig, main_if_addr, ETH_ALEN);
 
 		/* set broadcast sequence number */
-		bcast_packet->seqno = htons(bcast_seqno);
+		bcast_packet->seqno = htonl(bcast_seqno);
 
 		/* broadcast packet. on success, increase seqno. */
 		if (add_bcast_packet_to_list(skb) == NETDEV_TX_OK)
@@ -235,38 +188,36 @@ int interface_tx(struct sk_buff *skb, struct net_device *dev)
 		if (!orig_node)
 			orig_node = transtable_search(ethhdr->h_dest);
 
-		if ((orig_node) &&
-		    (orig_node->router)) {
-			struct neigh_node *router = orig_node->router;
+		router = find_router(orig_node, NULL);
 
-			if (my_skb_push(skb, sizeof(struct unicast_packet)) < 0)
-				goto unlock;
+		if (!router)
+			goto unlock;
 
-			unicast_packet = (struct unicast_packet *)skb->data;
+		/* don't lock while sending the packets ... we therefore
+		 * copy the required data before sending */
 
-			unicast_packet->version = COMPAT_VERSION;
-			/* batman packet type: unicast */
-			unicast_packet->packet_type = BAT_UNICAST;
-			/* set unicast ttl */
-			unicast_packet->ttl = TTL;
-			/* copy the destination for faster routing */
-			memcpy(unicast_packet->dest, orig_node->orig, ETH_ALEN);
+		batman_if = router->if_incoming;
+		memcpy(dstaddr, router->addr, ETH_ALEN);
 
-			/* net_dev won't be available when not active */
-			if (router->if_incoming->if_status != IF_ACTIVE)
-				goto unlock;
+		spin_unlock_irqrestore(&orig_hash_lock, flags);
 
-			/* don't lock while sending the packets ... we therefore
-			 * copy the required data before sending */
+		if (batman_if->if_status != IF_ACTIVE)
+			goto dropped;
 
-			batman_if = router->if_incoming;
-			memcpy(dstaddr, router->addr, ETH_ALEN);
-			spin_unlock_irqrestore(&orig_hash_lock, flags);
+		if (my_skb_push(skb, sizeof(struct unicast_packet)) < 0)
+			goto dropped;
 
-			send_skb_packet(skb, batman_if, dstaddr);
-		} else {
-			goto unlock;
-		}
+		unicast_packet = (struct unicast_packet *)skb->data;
+
+		unicast_packet->version = COMPAT_VERSION;
+		/* batman packet type: unicast */
+		unicast_packet->packet_type = BAT_UNICAST;
+		/* set unicast ttl */
+		unicast_packet->ttl = TTL;
+		/* copy the destination for faster routing */
+		memcpy(unicast_packet->dest, orig_node->orig, ETH_ALEN);
+
+		send_skb_packet(skb, batman_if, dstaddr);
 	}
 
 	priv->stats.tx_packets++;
@@ -315,6 +266,50 @@ void interface_rx(struct sk_buff *skb, int hdr_size)
 	netif_rx(skb);
 }
 
+#ifdef HAVE_NET_DEVICE_OPS
+static const struct net_device_ops bat_netdev_ops = {
+	.ndo_open = interface_open,
+	.ndo_stop = interface_release,
+	.ndo_get_stats = interface_stats,
+	.ndo_set_mac_address = interface_set_mac_addr,
+	.ndo_change_mtu = interface_change_mtu,
+	.ndo_start_xmit = interface_tx,
+	.ndo_validate_addr = eth_validate_addr
+};
+#endif
+
+void interface_setup(struct net_device *dev)
+{
+	struct bat_priv *priv = netdev_priv(dev);
+	char dev_addr[ETH_ALEN];
+
+	ether_setup(dev);
+
+#ifdef HAVE_NET_DEVICE_OPS
+	dev->netdev_ops = &bat_netdev_ops;
+#else
+	dev->open = interface_open;
+	dev->stop = interface_release;
+	dev->get_stats = interface_stats;
+	dev->set_mac_address = interface_set_mac_addr;
+	dev->change_mtu = interface_change_mtu;
+	dev->hard_start_xmit = interface_tx;
+#endif
+	dev->destructor = free_netdev;
+
+	dev->mtu = hardif_min_mtu();
+	dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
+						* skbuff for our header */
+
+	/* generate random address */
+	random_ether_addr(dev_addr);
+	memcpy(dev->dev_addr, dev_addr, ETH_ALEN);
+
+	SET_ETHTOOL_OPS(dev, &bat_ethtool_ops);
+
+	memset(priv, 0, sizeof(struct bat_priv));
+}
+
 /* ethtool */
 static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
diff --git a/drivers/staging/batman-adv/soft-interface.h b/drivers/staging/batman-adv/soft-interface.h
index e7f59af7df3..63648543900 100644
--- a/drivers/staging/batman-adv/soft-interface.h
+++ b/drivers/staging/batman-adv/soft-interface.h
@@ -19,16 +19,15 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_SOFT_INTERFACE_H_
+#define _NET_BATMAN_ADV_SOFT_INTERFACE_H_
+
 void set_main_if_addr(uint8_t *addr);
-int main_if_was_up(void);
 void interface_setup(struct net_device *dev);
-int interface_open(struct net_device *dev);
-int interface_release(struct net_device *dev);
-struct net_device_stats *interface_stats(struct net_device *dev);
-int interface_set_mac_addr(struct net_device *dev, void *addr);
-int interface_change_mtu(struct net_device *dev, int new_mtu);
 int interface_tx(struct sk_buff *skb, struct net_device *dev);
 void interface_rx(struct sk_buff *skb, int hdr_size);
 int my_skb_push(struct sk_buff *skb, unsigned int len);
 
-extern unsigned char mainIfAddr[];
+extern unsigned char main_if_addr[];
+
+#endif /* _NET_BATMAN_ADV_SOFT_INTERFACE_H_ */
diff --git a/drivers/staging/batman-adv/sysfs-class-net-batman-adv b/drivers/staging/batman-adv/sysfs-class-net-batman-adv
new file mode 100644
index 00000000000..38dd762def4
--- /dev/null
+++ b/drivers/staging/batman-adv/sysfs-class-net-batman-adv
@@ -0,0 +1,14 @@
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
diff --git a/drivers/staging/batman-adv/sysfs-class-net-mesh b/drivers/staging/batman-adv/sysfs-class-net-mesh
new file mode 100644
index 00000000000..5aa1912e455
--- /dev/null
+++ b/drivers/staging/batman-adv/sysfs-class-net-mesh
@@ -0,0 +1,33 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Each batman node only maintains information about its
+                own local neighborhood, therefore generating graphs
+                showing the topology of the entire mesh is not easily
+                feasible without having a central instance to collect
+                the local topologies from all nodes. This file allows
+                to activate the collecting (server) mode.
diff --git a/drivers/staging/batman-adv/translation-table.c b/drivers/staging/batman-adv/translation-table.c
index e01ff2151f7..b233377d756 100644
--- a/drivers/staging/batman-adv/translation-table.c
+++ b/drivers/staging/batman-adv/translation-table.c
@@ -32,7 +32,10 @@ atomic_t hna_local_changed;
 DEFINE_SPINLOCK(hna_local_hash_lock);
 static DEFINE_SPINLOCK(hna_global_hash_lock);
 
+static void hna_local_purge(struct work_struct *work);
 static DECLARE_DELAYED_WORK(hna_local_purge_wq, hna_local_purge);
+static void _hna_global_del_orig(struct hna_global_entry *hna_global_entry,
+				 char *message);
 
 static void hna_local_start_timer(void)
 {
@@ -57,6 +60,8 @@ int hna_local_init(void)
 
 void hna_local_add(uint8_t *addr)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct hna_local_entry *hna_local_entry;
 	struct hna_global_entry *hna_global_entry;
 	struct hashtable_t *swaphash;
@@ -77,15 +82,15 @@ void hna_local_add(uint8_t *addr)
 	   MAC-flooding. */
 	if ((num_hna + 1 > (ETH_DATA_LEN - BAT_PACKET_LEN) / ETH_ALEN) ||
 	    (num_hna + 1 > 255)) {
-		bat_dbg(DBG_ROUTES,
+		bat_dbg(DBG_ROUTES, bat_priv,
 			"Can't add new local hna entry (%pM): "
 			"number of local hna entries exceeds packet size\n",
 			addr);
 		return;
 	}
 
-	bat_dbg(DBG_ROUTES, "Creating new local hna entry: %pM\n",
-		addr);
+	bat_dbg(DBG_ROUTES, bat_priv,
+		"Creating new local hna entry: %pM\n", addr);
 
 	hna_local_entry = kmalloc(sizeof(struct hna_local_entry), GFP_ATOMIC);
 	if (!hna_local_entry)
@@ -111,8 +116,7 @@ void hna_local_add(uint8_t *addr)
 				       hna_local_hash->size * 2);
 
 		if (swaphash == NULL)
-			printk(KERN_ERR "batman-adv:"
-			       "Couldn't resize local hna hash table\n");
+			pr_err("Couldn't resize local hna hash table\n");
 		else
 			hna_local_hash = swaphash;
 	}
@@ -160,59 +164,54 @@ int hna_local_fill_buffer(unsigned char *buff, int buff_len)
 	return i;
 }
 
-int hna_local_fill_buffer_text(struct net_device *net_dev, char *buff,
-			       size_t count, loff_t off)
+int hna_local_seq_print_text(struct seq_file *seq, void *offset)
 {
+	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
 	struct hna_local_entry *hna_local_entry;
 	HASHIT(hashit);
-	int bytes_written = 0;
+	HASHIT(hashit_count);
 	unsigned long flags;
-	size_t hdr_len;
+	size_t buf_size, pos;
+	char *buff;
 
 	if (!bat_priv->primary_if) {
-		if (off == 0)
-			return sprintf(buff,
-				     "BATMAN mesh %s disabled - "
-				     "please specify interfaces to enable it\n",
-				     net_dev->name);
-
-		return 0;
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+			       "please specify interfaces to enable it\n",
+			       net_dev->name);
 	}
 
-	hdr_len = sprintf(buff,
-			  "Locally retrieved addresses (from %s) "
-			  "announced via HNA:\n",
-			  net_dev->name);
-
-	if (off < hdr_len)
-		bytes_written = hdr_len;
+	seq_printf(seq, "Locally retrieved addresses (from %s) "
+		   "announced via HNA:\n",
+		   net_dev->name);
 
 	spin_lock_irqsave(&hna_local_hash_lock, flags);
 
-	while (hash_iterate(hna_local_hash, &hashit)) {
-		hdr_len += 21;
-
-		if (count < bytes_written + 22)
-			break;
+	buf_size = 1;
+	/* Estimate length for: " * xx:xx:xx:xx:xx:xx\n" */
+	while (hash_iterate(hna_local_hash, &hashit_count))
+		buf_size += 21;
 
-		if (off >= hdr_len)
-			continue;
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_irqrestore(&hna_local_hash_lock, flags);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	pos = 0;
 
+	while (hash_iterate(hna_local_hash, &hashit)) {
 		hna_local_entry = hashit.bucket->data;
 
-		bytes_written += snprintf(buff + bytes_written, 22,
-					  " * " MAC_FMT "\n",
-					  hna_local_entry->addr[0],
-					  hna_local_entry->addr[1],
-					  hna_local_entry->addr[2],
-					  hna_local_entry->addr[3],
-					  hna_local_entry->addr[4],
-					  hna_local_entry->addr[5]);
+		pos += snprintf(buff + pos, 22, " * %pM\n",
+				hna_local_entry->addr);
 	}
 
 	spin_unlock_irqrestore(&hna_local_hash_lock, flags);
-	return bytes_written;
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+	return 0;
 }
 
 static void _hna_local_del(void *data)
@@ -225,7 +224,9 @@ static void _hna_local_del(void *data)
 static void hna_local_del(struct hna_local_entry *hna_local_entry,
 			  char *message)
 {
-	bat_dbg(DBG_ROUTES, "Deleting local hna entry (%pM): %s\n",
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+	bat_dbg(DBG_ROUTES, bat_priv, "Deleting local hna entry (%pM): %s\n",
 		hna_local_entry->addr, message);
 
 	hash_remove(hna_local_hash, hna_local_entry->addr);
@@ -247,7 +248,7 @@ void hna_local_remove(uint8_t *addr, char *message)
 	spin_unlock_irqrestore(&hna_local_hash_lock, flags);
 }
 
-void hna_local_purge(struct work_struct *work)
+static void hna_local_purge(struct work_struct *work)
 {
 	struct hna_local_entry *hna_local_entry;
 	HASHIT(hashit);
@@ -259,8 +260,7 @@ void hna_local_purge(struct work_struct *work)
 	while (hash_iterate(hna_local_hash, &hashit)) {
 		hna_local_entry = hashit.bucket->data;
 
-		timeout = hna_local_entry->last_seen +
-			((LOCAL_HNA_TIMEOUT / 1000) * HZ);
+		timeout = hna_local_entry->last_seen + LOCAL_HNA_TIMEOUT * HZ;
 		if ((!hna_local_entry->never_purge) &&
 		    time_after(jiffies, timeout))
 			hna_local_del(hna_local_entry, "address timed out");
@@ -296,6 +296,8 @@ int hna_global_init(void)
 void hna_global_add_orig(struct orig_node *orig_node,
 			 unsigned char *hna_buff, int hna_buff_len)
 {
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
 	struct hna_global_entry *hna_global_entry;
 	struct hna_local_entry *hna_local_entry;
 	struct hashtable_t *swaphash;
@@ -322,7 +324,7 @@ void hna_global_add_orig(struct orig_node *orig_node,
 
 			memcpy(hna_global_entry->addr, hna_ptr, ETH_ALEN);
 
-			bat_dbg(DBG_ROUTES,
+			bat_dbg(DBG_ROUTES, bat_priv,
 				"Creating new global hna entry: "
 				"%pM (via %pM)\n",
 				hna_global_entry->addr, orig_node->orig);
@@ -369,8 +371,7 @@ void hna_global_add_orig(struct orig_node *orig_node,
 				       hna_global_hash->size * 2);
 
 		if (swaphash == NULL)
-			printk(KERN_ERR "batman-adv:"
-			       "Couldn't resize global hna hash table\n");
+			pr_err("Couldn't resize global hna hash table\n");
 		else
 			hna_global_hash = swaphash;
 	}
@@ -378,71 +379,63 @@ void hna_global_add_orig(struct orig_node *orig_node,
 	spin_unlock_irqrestore(&hna_global_hash_lock, flags);
 }
 
-int hna_global_fill_buffer_text(struct net_device *net_dev, char *buff,
-				size_t count, loff_t off)
+int hna_global_seq_print_text(struct seq_file *seq, void *offset)
 {
+	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
 	struct hna_global_entry *hna_global_entry;
 	HASHIT(hashit);
-	int bytes_written = 0;
+	HASHIT(hashit_count);
 	unsigned long flags;
-	size_t hdr_len;
+	size_t buf_size, pos;
+	char *buff;
 
 	if (!bat_priv->primary_if) {
-		if (off == 0)
-			return sprintf(buff,
-				     "BATMAN mesh %s disabled - "
-				     "please specify interfaces to enable it\n",
-				     net_dev->name);
-
-		return 0;
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+				  "please specify interfaces to enable it\n",
+				  net_dev->name);
 	}
 
-	hdr_len = sprintf(buff,
-			  "Globally announced HNAs received via the mesh %s "
-			  "(translation table):\n",
-			  net_dev->name);
-
-	if (off < hdr_len)
-		bytes_written = hdr_len;
+	seq_printf(seq, "Globally announced HNAs received via the mesh %s\n",
+		   net_dev->name);
 
 	spin_lock_irqsave(&hna_global_hash_lock, flags);
 
-	while (hash_iterate(hna_global_hash, &hashit)) {
-		hdr_len += 43;
-
-		if (count < bytes_written + 44)
-			break;
+	buf_size = 1;
+	/* Estimate length for: " * xx:xx:xx:xx:xx:xx via xx:xx:xx:xx:xx:xx\n"*/
+	while (hash_iterate(hna_global_hash, &hashit_count))
+		buf_size += 43;
 
-		if (off >= hdr_len)
-			continue;
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_irqrestore(&hna_global_hash_lock, flags);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	pos = 0;
 
+	while (hash_iterate(hna_global_hash, &hashit)) {
 		hna_global_entry = hashit.bucket->data;
 
-		bytes_written += snprintf(buff + bytes_written, 44,
-					  " * " MAC_FMT " via " MAC_FMT "\n",
-					  hna_global_entry->addr[0],
-					  hna_global_entry->addr[1],
-					  hna_global_entry->addr[2],
-					  hna_global_entry->addr[3],
-					  hna_global_entry->addr[4],
-					  hna_global_entry->addr[5],
-					  hna_global_entry->orig_node->orig[0],
-					  hna_global_entry->orig_node->orig[1],
-					  hna_global_entry->orig_node->orig[2],
-					  hna_global_entry->orig_node->orig[3],
-					  hna_global_entry->orig_node->orig[4],
-					  hna_global_entry->orig_node->orig[5]);
+		pos += snprintf(buff + pos, 44,
+				" * %pM via %pM\n", hna_global_entry->addr,
+				hna_global_entry->orig_node->orig);
 	}
 
 	spin_unlock_irqrestore(&hna_global_hash_lock, flags);
-	return bytes_written;
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+	return 0;
 }
 
-void _hna_global_del_orig(struct hna_global_entry *hna_global_entry,
-			  char *message)
+static void _hna_global_del_orig(struct hna_global_entry *hna_global_entry,
+				 char *message)
 {
-	bat_dbg(DBG_ROUTES, "Deleting global hna entry %pM (via %pM): %s\n",
+	/* FIXME: each orig_node->batman_if will be attached to a softif */
+	struct bat_priv *bat_priv = netdev_priv(soft_device);
+	bat_dbg(DBG_ROUTES, bat_priv,
+		"Deleting global hna entry %pM (via %pM): %s\n",
 		hna_global_entry->addr, hna_global_entry->orig_node->orig,
 		message);
 
diff --git a/drivers/staging/batman-adv/translation-table.h b/drivers/staging/batman-adv/translation-table.h
index 8f412fca87f..fa93e37d095 100644
--- a/drivers/staging/batman-adv/translation-table.h
+++ b/drivers/staging/batman-adv/translation-table.h
@@ -19,23 +19,21 @@
  *
  */
 
+#ifndef _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
+#define _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
+
 #include "types.h"
 
 int hna_local_init(void);
 void hna_local_add(uint8_t *addr);
 void hna_local_remove(uint8_t *addr, char *message);
 int hna_local_fill_buffer(unsigned char *buff, int buff_len);
-int hna_local_fill_buffer_text(struct net_device *net_dev, char *buff,
-			       size_t count, loff_t off);
-void hna_local_purge(struct work_struct *work);
+int hna_local_seq_print_text(struct seq_file *seq, void *offset);
 void hna_local_free(void);
 int hna_global_init(void);
 void hna_global_add_orig(struct orig_node *orig_node, unsigned char *hna_buff,
 			 int hna_buff_len);
-int hna_global_fill_buffer_text(struct net_device *net_dev, char *buff,
-				size_t count, loff_t off);
-void _hna_global_del_orig(struct hna_global_entry *hna_global_entry,
-			  char *orig_str);
+int hna_global_seq_print_text(struct seq_file *seq, void *offset);
 void hna_global_del_orig(struct orig_node *orig_node, char *message);
 void hna_global_free(void);
 struct orig_node *transtable_search(uint8_t *addr);
@@ -43,3 +41,5 @@ struct orig_node *transtable_search(uint8_t *addr);
 extern spinlock_t hna_local_hash_lock;
 extern struct hashtable_t *hna_local_hash;
 extern atomic_t hna_local_changed;
+
+#endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
diff --git a/drivers/staging/batman-adv/types.h b/drivers/staging/batman-adv/types.h
index 86007c7eb44..21d0717afb0 100644
--- a/drivers/staging/batman-adv/types.h
+++ b/drivers/staging/batman-adv/types.h
@@ -21,10 +21,8 @@
 
 
 
-
-
-#ifndef TYPES_H
-#define TYPES_H
+#ifndef _NET_BATMAN_ADV_TYPES_H_
+#define _NET_BATMAN_ADV_TYPES_H_
 
 #include "packet.h"
 #include "bitarray.h"
@@ -52,6 +50,7 @@ struct batman_if {
 
 /**
   *	orig_node - structure for orig_list maintaining nodes of mesh
+  *	@primary_addr: hosts primary interface address
   *	@last_valid: when last packet from this node was received
   *	@bcast_seqno_reset: time when the broadcast seqno window was reset
   *	@batman_seqno_reset: time when the batman seqno window was reset
@@ -59,9 +58,13 @@ struct batman_if {
   *	@last_real_seqno: last and best known squence number
   *	@last_ttl: ttl of last received packet
   *	@last_bcast_seqno: last broadcast sequence number received by this host
+  *
+  *	@candidates: how many candidates are available
+  *	@selected: next bonding candidate
  */
 struct orig_node {
 	uint8_t orig[ETH_ALEN];
+	uint8_t primary_addr[ETH_ALEN];
 	struct neigh_node *router;
 	TYPE_OF_WORD *bcast_own;
 	uint8_t *bcast_own_sum;
@@ -72,12 +75,16 @@ struct orig_node {
 	unsigned long batman_seqno_reset;
 	uint8_t  flags;
 	unsigned char *hna_buff;
-	int16_t  hna_buff_len;
-	uint16_t last_real_seqno;
+	int16_t hna_buff_len;
+	uint32_t last_real_seqno;
 	uint8_t last_ttl;
 	TYPE_OF_WORD bcast_bits[NUM_WORDS];
-	uint16_t last_bcast_seqno;
+	uint32_t last_bcast_seqno;
 	struct list_head neigh_list;
+	struct {
+		uint8_t candidates;
+		struct neigh_node *selected;
+	} bond;
 };
 
 /**
@@ -92,6 +99,7 @@ struct neigh_node {
 	uint8_t tq_index;
 	uint8_t tq_avg;
 	uint8_t last_ttl;
+	struct neigh_node *next_bond_candidate;
 	unsigned long last_valid;
 	TYPE_OF_WORD real_bits[NUM_WORDS];
 	struct orig_node *orig_node;
@@ -101,14 +109,18 @@ struct neigh_node {
 struct bat_priv {
 	struct net_device_stats stats;
 	atomic_t aggregation_enabled;
+	atomic_t bonding_enabled;
 	atomic_t vis_mode;
 	atomic_t orig_interval;
+	atomic_t log_level;
 	char num_ifaces;
+	struct debug_log *debug_log;
 	struct batman_if *primary_if;
 	struct kobject *mesh_obj;
+	struct dentry *debug_dir;
 };
 
-struct device_client {
+struct socket_client {
 	struct list_head queue_list;
 	unsigned int queue_len;
 	unsigned char index;
@@ -116,9 +128,10 @@ struct device_client {
 	wait_queue_head_t queue_wait;
 };
 
-struct device_packet {
+struct socket_packet {
 	struct list_head list;
-	struct icmp_packet icmp_packet;
+	size_t icmp_len;
+	struct icmp_packet_rr icmp_packet;
 };
 
 struct hna_local_entry {
@@ -159,4 +172,12 @@ struct if_list_entry {
 	struct hlist_node list;
 };
 
-#endif
+struct debug_log {
+	char log_buff[LOG_BUF_LEN];
+	unsigned long log_start;
+	unsigned long log_end;
+	spinlock_t lock;
+	wait_queue_head_t queue_wait;
+};
+
+#endif /* _NET_BATMAN_ADV_TYPES_H_ */
diff --git a/drivers/staging/batman-adv/vis.c b/drivers/staging/batman-adv/vis.c
index 1d3d954847f..4b6a5045f05 100644
--- a/drivers/staging/batman-adv/vis.c
+++ b/drivers/staging/batman-adv/vis.c
@@ -43,8 +43,8 @@
 			_dummy > smallest_signed_int(_dummy); })
 #define seq_after(x, y) seq_before(y, x)
 
-struct hashtable_t *vis_hash;
-DEFINE_SPINLOCK(vis_hash_lock);
+static struct hashtable_t *vis_hash;
+static DEFINE_SPINLOCK(vis_hash_lock);
 static DEFINE_SPINLOCK(recv_list_lock);
 static struct vis_info *my_vis_info;
 static struct list_head send_list;	/* always locked with vis_hash_lock */
@@ -115,7 +115,7 @@ static void vis_data_insert_interface(const uint8_t *interface,
 	}
 
 	/* its a new address, add it to the list */
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
 	if (!entry)
 		return;
 	memcpy(entry->addr, interface, ETH_ALEN);
@@ -142,12 +142,29 @@ static ssize_t vis_data_read_prim_sec(char *buff, struct hlist_head *if_list)
 	return len;
 }
 
+static size_t vis_data_count_prim_sec(struct hlist_head *if_list)
+{
+	struct if_list_entry *entry;
+	struct hlist_node *pos;
+	size_t count = 0;
+
+	hlist_for_each_entry(entry, pos, if_list, list) {
+		if (entry->primary)
+			count += 9;
+		else
+			count += 23;
+	}
+
+	return count;
+}
+
 /* read an entry  */
 static ssize_t vis_data_read_entry(char *buff, struct vis_info_entry *entry,
 				   uint8_t *src, bool primary)
 {
-	char to[40];
+	char to[18];
 
+	/* maximal length: max(4+17+2, 3+17+1+3+2) == 26 */
 	addr_to_string(to, entry->dest);
 	if (primary && entry->quality == 0)
 		return sprintf(buff, "HNA %s, ", to);
@@ -157,38 +174,74 @@ static ssize_t vis_data_read_entry(char *buff, struct vis_info_entry *entry,
 	return 0;
 }
 
-ssize_t vis_fill_buffer_text(struct net_device *net_dev, char *buff,
-			      size_t count, loff_t off)
+int vis_seq_print_text(struct seq_file *seq, void *offset)
 {
 	HASHIT(hashit);
+	HASHIT(hashit_count);
 	struct vis_info *info;
 	struct vis_info_entry *entries;
+	struct net_device *net_dev = (struct net_device *)seq->private;
 	struct bat_priv *bat_priv = netdev_priv(net_dev);
 	HLIST_HEAD(vis_if_list);
 	struct if_list_entry *entry;
 	struct hlist_node *pos, *n;
-	size_t hdr_len, tmp_len;
-	int i, bytes_written = 0;
+	int i;
 	char tmp_addr_str[ETH_STR_LEN];
 	unsigned long flags;
 	int vis_server = atomic_read(&bat_priv->vis_mode);
+	size_t buff_pos, buf_size;
+	char *buff;
 
 	if ((!bat_priv->primary_if) ||
 	    (vis_server == VIS_TYPE_CLIENT_UPDATE))
 		return 0;
 
-	hdr_len = 0;
-
+	buf_size = 1;
+	/* Estimate length */
 	spin_lock_irqsave(&vis_hash_lock, flags);
+	while (hash_iterate(vis_hash, &hashit_count)) {
+		info = hashit_count.bucket->data;
+		entries = (struct vis_info_entry *)
+			((char *)info + sizeof(struct vis_info));
+
+		for (i = 0; i < info->packet.entries; i++) {
+			if (entries[i].quality == 0)
+				continue;
+			vis_data_insert_interface(entries[i].src, &vis_if_list,
+				compare_orig(entries[i].src,
+						info->packet.vis_orig));
+		}
+
+		hlist_for_each_entry(entry, pos, &vis_if_list, list) {
+			buf_size += 18 + 26 * info->packet.entries;
+
+			/* add primary/secondary records */
+			if (compare_orig(entry->addr, info->packet.vis_orig))
+				buf_size +=
+					vis_data_count_prim_sec(&vis_if_list);
+
+			buf_size += 1;
+		}
+
+		hlist_for_each_entry_safe(entry, pos, n, &vis_if_list, list) {
+			hlist_del(&entry->list);
+			kfree(entry);
+		}
+	}
+
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_irqrestore(&vis_hash_lock, flags);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	buff_pos = 0;
+
 	while (hash_iterate(vis_hash, &hashit)) {
 		info = hashit.bucket->data;
 		entries = (struct vis_info_entry *)
 			((char *)info + sizeof(struct vis_info));
 
-		/* estimated line length */
-		if (count < bytes_written + 200)
-			break;
-
 		for (i = 0; i < info->packet.entries; i++) {
 			if (entries[i].quality == 0)
 				continue;
@@ -199,30 +252,22 @@ ssize_t vis_fill_buffer_text(struct net_device *net_dev, char *buff,
 
 		hlist_for_each_entry(entry, pos, &vis_if_list, list) {
 			addr_to_string(tmp_addr_str, entry->addr);
-			tmp_len = sprintf(buff + bytes_written,
-					  "%s,", tmp_addr_str);
+			buff_pos += sprintf(buff + buff_pos, "%s,",
+					    tmp_addr_str);
 
 			for (i = 0; i < info->packet.entries; i++)
-				tmp_len += vis_data_read_entry(
-						buff + bytes_written + tmp_len,
-						&entries[i], entry->addr,
-						entry->primary);
+				buff_pos += vis_data_read_entry(buff + buff_pos,
+								&entries[i],
+								entry->addr,
+								entry->primary);
 
 			/* add primary/secondary records */
 			if (compare_orig(entry->addr, info->packet.vis_orig))
-				tmp_len += vis_data_read_prim_sec(
-						buff + bytes_written + tmp_len,
-						&vis_if_list);
-
-			tmp_len += sprintf(buff + bytes_written + tmp_len,
-					  "\n");
-
-			hdr_len += tmp_len;
+				buff_pos +=
+					vis_data_read_prim_sec(buff + buff_pos,
+							       &vis_if_list);
 
-			if (off >= hdr_len)
-				continue;
-
-			bytes_written += tmp_len;
+			buff_pos += sprintf(buff + buff_pos, "\n");
 		}
 
 		hlist_for_each_entry_safe(entry, pos, n, &vis_if_list, list) {
@@ -230,9 +275,13 @@ ssize_t vis_fill_buffer_text(struct net_device *net_dev, char *buff,
 			kfree(entry);
 		}
 	}
+
 	spin_unlock_irqrestore(&vis_hash_lock, flags);
 
-	return bytes_written;
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+
+	return 0;
 }
 
 /* add the info packet to the send list, if it was not
@@ -308,7 +357,8 @@ static struct vis_info *add_packet(struct vis_packet *vis_packet,
 	old_info = hash_find(vis_hash, &search_elem);
 
 	if (old_info != NULL) {
-		if (!seq_after(vis_packet->seqno, old_info->packet.seqno)) {
+		if (!seq_after(ntohl(vis_packet->seqno),
+				ntohl(old_info->packet.seqno))) {
 			if (old_info->packet.seqno == vis_packet->seqno) {
 				recv_list_add(&old_info->recv_list,
 					      vis_packet->sender_orig);
@@ -340,7 +390,7 @@ static struct vis_info *add_packet(struct vis_packet *vis_packet,
 
 	/* Make it a broadcast packet, if required */
 	if (make_broadcast)
-		memcpy(info->packet.target_orig, broadcastAddr, ETH_ALEN);
+		memcpy(info->packet.target_orig, broadcast_addr, ETH_ALEN);
 
 	/* repair if entries is longer than packet. */
 	if (info->packet.entries * sizeof(struct vis_info_entry) > vis_info_len)
@@ -474,9 +524,9 @@ static int generate_vis_packet(struct bat_priv *bat_priv)
 	info->packet.vis_type = atomic_read(&bat_priv->vis_mode);
 
 	spin_lock_irqsave(&orig_hash_lock, flags);
-	memcpy(info->packet.target_orig, broadcastAddr, ETH_ALEN);
+	memcpy(info->packet.target_orig, broadcast_addr, ETH_ALEN);
 	info->packet.ttl = TTL;
-	info->packet.seqno++;
+	info->packet.seqno = htonl(ntohl(info->packet.seqno) + 1);
 	info->packet.entries = 0;
 
 	if (info->packet.vis_type == VIS_TYPE_CLIENT_UPDATE) {
@@ -547,7 +597,7 @@ static void purge_vis_packets(void)
 		if (info == my_vis_info)	/* never purge own data. */
 			continue;
 		if (time_after(jiffies,
-			       info->first_seen + (VIS_TIMEOUT*HZ)/1000)) {
+			       info->first_seen + VIS_TIMEOUT * HZ)) {
 			hash_remove_bucket(vis_hash, &hashit);
 			send_list_del(info);
 			kref_put(&info->refcount, free_info);
@@ -591,7 +641,7 @@ static void broadcast_vis_packet(struct vis_info *info, int packet_length)
 
 	}
 	spin_unlock_irqrestore(&orig_hash_lock, flags);
-	memcpy(info->packet.target_orig, broadcastAddr, ETH_ALEN);
+	memcpy(info->packet.target_orig, broadcast_addr, ETH_ALEN);
 }
 
 static void unicast_vis_packet(struct vis_info *info, int packet_length)
@@ -628,11 +678,11 @@ static void send_vis_packet(struct vis_info *info)
 	int packet_length;
 
 	if (info->packet.ttl < 2) {
-		printk(KERN_WARNING "batman-adv: Error - can't send vis packet: ttl exceeded\n");
+		pr_warning("Error - can't send vis packet: ttl exceeded\n");
 		return;
 	}
 
-	memcpy(info->packet.sender_orig, mainIfAddr, ETH_ALEN);
+	memcpy(info->packet.sender_orig, main_if_addr, ETH_ALEN);
 	info->packet.ttl--;
 
 	packet_length = sizeof(struct vis_packet) +
@@ -690,18 +740,18 @@ int vis_init(void)
 
 	vis_hash = hash_new(256, vis_info_cmp, vis_info_choose);
 	if (!vis_hash) {
-		printk(KERN_ERR "batman-adv:Can't initialize vis_hash\n");
+		pr_err("Can't initialize vis_hash\n");
 		goto err;
 	}
 
 	my_vis_info = kmalloc(1000, GFP_ATOMIC);
 	if (!my_vis_info) {
-		printk(KERN_ERR "batman-adv:Can't initialize vis packet\n");
+		pr_err("Can't initialize vis packet\n");
 		goto err;
 	}
 
 	/* prefill the vis info */
-	my_vis_info->first_seen = jiffies - atomic_read(&vis_interval);
+	my_vis_info->first_seen = jiffies - msecs_to_jiffies(VIS_INTERVAL);
 	INIT_LIST_HEAD(&my_vis_info->recv_list);
 	INIT_LIST_HEAD(&my_vis_info->send_list);
 	kref_init(&my_vis_info->refcount);
@@ -713,12 +763,11 @@ int vis_init(void)
 
 	INIT_LIST_HEAD(&send_list);
 
-	memcpy(my_vis_info->packet.vis_orig, mainIfAddr, ETH_ALEN);
-	memcpy(my_vis_info->packet.sender_orig, mainIfAddr, ETH_ALEN);
+	memcpy(my_vis_info->packet.vis_orig, main_if_addr, ETH_ALEN);
+	memcpy(my_vis_info->packet.sender_orig, main_if_addr, ETH_ALEN);
 
 	if (hash_add(vis_hash, my_vis_info) < 0) {
-		printk(KERN_ERR
-		       "batman-adv:Can't add own vis packet into hash\n");
+		pr_err("Can't add own vis packet into hash\n");
 		/* not in hash, need to remove it manually. */
 		kref_put(&my_vis_info->refcount, free_info);
 		goto err;
@@ -764,5 +813,5 @@ void vis_quit(void)
 static void start_vis_timer(void)
 {
 	queue_delayed_work(bat_event_workqueue, &vis_timer_wq,
-			   (atomic_read(&vis_interval) * HZ) / 1000);
+			   (VIS_INTERVAL * HZ) / 1000);
 }
diff --git a/drivers/staging/batman-adv/vis.h b/drivers/staging/batman-adv/vis.h
index 9c1fd771cba..bb13bf1a3f4 100644
--- a/drivers/staging/batman-adv/vis.h
+++ b/drivers/staging/batman-adv/vis.h
@@ -19,7 +19,10 @@
  *
  */
 
-#define VIS_TIMEOUT		200000
+#ifndef _NET_BATMAN_ADV_VIS_H_
+#define _NET_BATMAN_ADV_VIS_H_
+
+#define VIS_TIMEOUT		200	/* timeout of vis packets in seconds */
 
 struct vis_info {
 	unsigned long       first_seen;
@@ -44,11 +47,7 @@ struct recvlist_node {
 	uint8_t mac[ETH_ALEN];
 };
 
-extern struct hashtable_t *vis_hash;
-extern spinlock_t vis_hash_lock;
-
-ssize_t vis_fill_buffer_text(struct net_device *net_dev, char *buff,
-			      size_t count, loff_t off);
+int vis_seq_print_text(struct seq_file *seq, void *offset);
 void receive_server_sync_packet(struct bat_priv *bat_priv,
 				struct vis_packet *vis_packet,
 				int vis_info_len);
@@ -57,3 +56,5 @@ void receive_client_update_packet(struct bat_priv *bat_priv,
 				  int vis_info_len);
 int vis_init(void);
 void vis_quit(void);
+
+#endif /* _NET_BATMAN_ADV_VIS_H_ */
diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO
index 15c9348fb93..b10f739b7e3 100644
--- a/drivers/staging/comedi/TODO
+++ b/drivers/staging/comedi/TODO
@@ -2,7 +2,6 @@ TODO:
 	- checkpatch.pl cleanups
 	- Lindent
 	- remove all wrappers
-	- remove typedefs
 	- audit userspace interface
 	- reserve major number
 	- cleanup the individual comedi drivers as well
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index aeb2c00875c..14091313ceb 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1845,8 +1845,15 @@ ok:
 		}
 	}
 
-	if (dev->attached && dev->use_count == 0 && dev->open)
-		dev->open(dev);
+	if (dev->attached && dev->use_count == 0 && dev->open) {
+		int rc = dev->open(dev);
+		if (rc < 0) {
+			module_put(dev->driver->module);
+			module_put(THIS_MODULE);
+			mutex_unlock(&dev->mutex);
+			return rc;
+		}
+	}
 
 	dev->use_count++;
 
diff --git a/drivers/staging/comedi/comedidev.h b/drivers/staging/comedi/comedidev.h
index 4eb2b77f56d..68aa9176d24 100644
--- a/drivers/staging/comedi/comedidev.h
+++ b/drivers/staging/comedi/comedidev.h
@@ -53,62 +53,6 @@
 	COMEDI_MINORVERSION, COMEDI_MICROVERSION)
 #define COMEDI_RELEASE VERSION
 
-#define COMEDI_INITCLEANUP_NOMODULE(x)					\
-	static int __init x ## _init_module(void)			\
-		{return comedi_driver_register(&(x)); }			\
-	static void __exit x ## _cleanup_module(void)			\
-		{comedi_driver_unregister(&(x)); }			\
-	module_init(x ## _init_module);					\
-	module_exit(x ## _cleanup_module);
-
-#define COMEDI_MODULE_MACROS						\
-	MODULE_AUTHOR("Comedi http://www.comedi.org");		\
-	MODULE_DESCRIPTION("Comedi low-level driver");			\
-	MODULE_LICENSE("GPL");
-
-#define COMEDI_INITCLEANUP(x)						\
-	COMEDI_MODULE_MACROS		\
-	COMEDI_INITCLEANUP_NOMODULE(x)
-
-#define COMEDI_PCI_INITCLEANUP_NOMODULE(comedi_driver, pci_id_table) \
-	static int __devinit comedi_driver ## _pci_probe(struct pci_dev *dev, \
-		const struct pci_device_id *ent) \
-	{ \
-		return comedi_pci_auto_config(dev, comedi_driver.driver_name); \
-	} \
-	static void __devexit comedi_driver ## _pci_remove(\
-		struct pci_dev *dev) \
-	{ \
-		comedi_pci_auto_unconfig(dev); \
-	} \
-	static struct pci_driver comedi_driver ## _pci_driver = \
-	{ \
-		.id_table = pci_id_table, \
-		.probe = &comedi_driver ## _pci_probe, \
-		.remove = __devexit_p(&comedi_driver ## _pci_remove) \
-	}; \
-	static int __init comedi_driver ## _init_module(void) \
-	{ \
-		int retval; \
-		retval = comedi_driver_register(&comedi_driver); \
-		if (retval < 0) \
-			return retval; \
-			comedi_driver ## _pci_driver.name = \
-				(char *)comedi_driver.driver_name; \
-		return pci_register_driver(&comedi_driver ## _pci_driver); \
-	} \
-	static void __exit comedi_driver ## _cleanup_module(void) \
-	{ \
-		pci_unregister_driver(&comedi_driver ## _pci_driver); \
-		comedi_driver_unregister(&comedi_driver); \
-	} \
-	module_init(comedi_driver ## _init_module); \
-	module_exit(comedi_driver ## _cleanup_module);
-
-#define COMEDI_PCI_INITCLEANUP(comedi_driver, pci_id_table) \
-	COMEDI_MODULE_MACROS \
-	COMEDI_PCI_INITCLEANUP_NOMODULE(comedi_driver, pci_id_table)
-
 #define PCI_VENDOR_ID_ADLINK		0x144a
 #define PCI_VENDOR_ID_ICP		0x104c
 #define PCI_VENDOR_ID_CONTEC		0x1221
@@ -285,7 +229,7 @@ struct comedi_device {
 
 	struct fasync_struct *async_queue;
 
-	void (*open) (struct comedi_device *dev);
+	int (*open) (struct comedi_device *dev);
 	void (*close) (struct comedi_device *dev);
 };
 
diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index fe63830bd85..95049a8d3b3 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -117,7 +117,18 @@ static struct comedi_driver driver_8255 = {
 	.detach = dev_8255_detach,
 };
 
-COMEDI_INITCLEANUP(driver_8255);
+static int __init driver_8255_init_module(void)
+{
+	return comedi_driver_register(&driver_8255);
+}
+
+static void __exit driver_8255_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_8255);
+}
+
+module_init(driver_8255_init_module);
+module_exit(driver_8255_cleanup_module);
 
 static void do_config(struct comedi_device *dev, struct comedi_subdevice *s);
 
@@ -457,3 +468,7 @@ static int dev_8255_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/acl7225b.c b/drivers/staging/comedi/drivers/acl7225b.c
index e20c3542c06..9def2250bb8 100644
--- a/drivers/staging/comedi/drivers/acl7225b.c
+++ b/drivers/staging/comedi/drivers/acl7225b.c
@@ -49,7 +49,18 @@ static struct comedi_driver driver_acl7225b = {
 	.offset = sizeof(struct boardtype),
 };
 
-COMEDI_INITCLEANUP(driver_acl7225b);
+static int __init driver_acl7225b_init_module(void)
+{
+	return comedi_driver_register(&driver_acl7225b);
+}
+
+static void __exit driver_acl7225b_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_acl7225b);
+}
+
+module_init(driver_acl7225b_init_module);
+module_exit(driver_acl7225b_cleanup_module);
 
 static int acl7225b_do_insn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
@@ -150,3 +161,7 @@ static int acl7225b_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
index c3284eb0f0a..8ed19bcbf35 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_s5933.h
@@ -247,16 +247,14 @@ int i_pci_card_data(struct pcilst_struct *amcc,
 /* build list of amcc cards in this system */
 void v_pci_card_list_init(unsigned short pci_vendor, char display)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct pcilst_struct *amcc, *last;
 	int i;
 	int i_Count = 0;
 	amcc_devices = NULL;
 	last = NULL;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		for (i_Count = 0; i_Count < 2; i_Count++) {
 			pci_vendor = i_ADDIDATADeviceID[i_Count];
 			if (pcidev->vendor == pci_vendor) {
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index b18e81d8cf8..5ed4b9451f2 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -2541,7 +2541,43 @@ static struct comedi_driver driver_addi = {
 	.offset = sizeof(struct addi_board),
 };
 
-COMEDI_PCI_INITCLEANUP(driver_addi, addi_apci_tbl);
+static int __devinit driver_addi_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_addi.driver_name);
+}
+
+static void __devexit driver_addi_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_addi_pci_driver = {
+	.id_table = addi_apci_tbl,
+	.probe = &driver_addi_pci_probe,
+	.remove = __devexit_p(&driver_addi_pci_remove)
+};
+
+static int __init driver_addi_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_addi);
+	if (retval < 0)
+		return retval;
+
+	driver_addi_pci_driver.name = (char *)driver_addi.driver_name;
+	return pci_register_driver(&driver_addi_pci_driver);
+}
+
+static void __exit driver_addi_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_addi_pci_driver);
+	comedi_driver_unregister(&driver_addi);
+}
+
+module_init(driver_addi_init_module);
+module_exit(driver_addi_cleanup_module);
 
 /*
 +----------------------------------------------------------------------------+
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
index bea329f44d8..e0213a903af 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
@@ -101,10 +101,10 @@ struct str_TimerMainHeader {
 };
 
 
-typedef struct {
+struct str_AnalogOutputHeader {
 	unsigned short w_Nchannel;
 	unsigned char b_Resolution;
-} str_AnalogOutputHeader;
+};
 
 struct str_AnalogInputHeader {
 	unsigned short w_Nchannel;
@@ -136,7 +136,7 @@ int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
 
 int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, unsigned short w_Address,
-	str_AnalogOutputHeader *s_Header);
+	struct str_AnalogOutputHeader *s_Header);
 
 int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, unsigned short w_Address,
@@ -635,7 +635,7 @@ void v_EepromSendCommand76(unsigned int dw_Address, unsigned int dw_EepromComman
 
 | Input Parameters  : unsigned int dw_Address : PCI eeprom base address                  |
 
-|		      unsigned short    w_offset : Offset of the adress to read             |
+|		      unsigned short    w_offset : Offset of the address to read             |
 
 |		      unsigned short *   pw_Value : PCI eeprom 16 bit read value.            |
 
@@ -811,7 +811,7 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 	struct str_DigitalInputHeader s_DigitalInputHeader;
 	struct str_DigitalOutputHeader s_DigitalOutputHeader;
 	/* struct str_TimerMainHeader     s_TimerMainHeader,s_WatchdogMainHeader; */
-	str_AnalogOutputHeader s_AnalogOutputHeader;
+	struct str_AnalogOutputHeader s_AnalogOutputHeader;
 	struct str_AnalogInputHeader s_AnalogInputHeader;
 
 	/* Read size */
@@ -1081,7 +1081,7 @@ int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
 
 int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, unsigned short w_Address,
-	str_AnalogOutputHeader *s_Header)
+	struct str_AnalogOutputHeader *s_Header)
 {
 	unsigned short w_Temp;
 	/*  No of channels for 1st hard component */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index f93ddd4eb06..851f71bbf1b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -1090,13 +1090,13 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
  * and put into into an array array used may be for differnet pages
  */
 
-		/*  DMA Start Adress Low */
+		/*  DMA Start Address Low */
 		outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ul_DmaBufferHw[0] & 0xFFFF),
 			devpriv->i_IobaseAddon + 2);
 
 		/*************************/
-		/* DMA Start Adress High */
+		/* DMA Start Address High */
 		/*************************/
 		outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
 		outw((devpriv->ul_DmaBufferHw[0] / 65536),
@@ -1733,11 +1733,11 @@ void v_APCI3120_InterruptDma(int irq, void *d)
 		var = devpriv->ul_DmaBufferHw[next_dma_buf];
 		high_word = var / 65536;
 
-		/* DMA Start Adress Low */
+		/* DMA Start Address Low */
 		outw(APCI3120_ADD_ON_MWAR_LOW, devpriv->i_IobaseAddon + 0);
 		outw(low_word, devpriv->i_IobaseAddon + 2);
 
-		/* DMA Start Adress High */
+		/* DMA Start Address High */
 		outw(APCI3120_ADD_ON_MWAR_HIGH, devpriv->i_IobaseAddon + 0);
 		outw(high_word, devpriv->i_IobaseAddon + 2);
 
diff --git a/drivers/staging/comedi/drivers/addi_apci_035.c b/drivers/staging/comedi/drivers/addi_apci_035.c
index 6dfcbe803f2..4c00df4bc15 100644
--- a/drivers/staging/comedi/drivers/addi_apci_035.c
+++ b/drivers/staging/comedi/drivers/addi_apci_035.c
@@ -5,3 +5,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_035"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1032.c b/drivers/staging/comedi/drivers/addi_apci_1032.c
index 4722ec834f7..7831ce33b02 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_1032"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1500.c b/drivers/staging/comedi/drivers/addi_apci_1500.c
index db3dafdcf69..bfd84f66d9c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_1500"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1516.c b/drivers/staging/comedi/drivers/addi_apci_1516.c
index f591baff6a0..a12e2f42137 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1516.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1516.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_1516"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_1564.c b/drivers/staging/comedi/drivers/addi_apci_1564.c
index 6f5c923ac22..1b9d598fb6c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_1564"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_16xx.c b/drivers/staging/comedi/drivers/addi_apci_16xx.c
index 1d926add9e6..d54218d59c5 100644
--- a/drivers/staging/comedi/drivers/addi_apci_16xx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_16xx.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_16xx"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2016.c b/drivers/staging/comedi/drivers/addi_apci_2016.c
index 7266e412f0a..fa50c7bb7ad 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2016.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2016.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_2016"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c
index f67da94119e..073a8a56dbe 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2032.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_2032"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_2200.c b/drivers/staging/comedi/drivers/addi_apci_2200.c
index bc7f7d65350..adfbb5d410e 100644
--- a/drivers/staging/comedi/drivers/addi_apci_2200.c
+++ b/drivers/staging/comedi/drivers/addi_apci_2200.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_2200"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3001.c b/drivers/staging/comedi/drivers/addi_apci_3001.c
index d86c4209cb9..00ac762965c 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3001.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3001.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_3001"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3120.c b/drivers/staging/comedi/drivers/addi_apci_3120.c
index 0b22cf10415..c35515845cf 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3120.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3120.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_3120"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3501.c b/drivers/staging/comedi/drivers/addi_apci_3501.c
index d8a01b154e3..dd2c1d3bc18 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3501.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3501.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_3501"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/addi_apci_3xxx.c b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
index 942bc9e259a..03161c88eac 100644
--- a/drivers/staging/comedi/drivers/addi_apci_3xxx.c
+++ b/drivers/staging/comedi/drivers/addi_apci_3xxx.c
@@ -3,3 +3,7 @@
 #define ADDIDATA_DRIVER_NAME	"addi_apci_3xxx"
 
 #include "addi-data/addi_common.c"
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c
index 712b9e0788b..073d0242c28 100644
--- a/drivers/staging/comedi/drivers/adl_pci6208.c
+++ b/drivers/staging/comedi/drivers/adl_pci6208.c
@@ -119,7 +119,43 @@ static struct comedi_driver driver_pci6208 = {
 	.detach = pci6208_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_pci6208, pci6208_pci_table);
+static int __devinit driver_pci6208_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pci6208.driver_name);
+}
+
+static void __devexit driver_pci6208_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pci6208_pci_driver = {
+	.id_table = pci6208_pci_table,
+	.probe = &driver_pci6208_pci_probe,
+	.remove = __devexit_p(&driver_pci6208_pci_remove)
+};
+
+static int __init driver_pci6208_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci6208);
+	if (retval < 0)
+		return retval;
+
+	driver_pci6208_pci_driver.name = (char *)driver_pci6208.driver_name;
+	return pci_register_driver(&driver_pci6208_pci_driver);
+}
+
+static void __exit driver_pci6208_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci6208_pci_driver);
+	comedi_driver_unregister(&driver_pci6208);
+}
+
+module_init(driver_pci6208_init_module);
+module_exit(driver_pci6208_cleanup_module);
 
 static int pci6208_find_device(struct comedi_device *dev, int bus, int slot);
 static int
@@ -315,12 +351,10 @@ static int pci6208_ao_rinsn(struct comedi_device *dev,
 
 static int pci6208_find_device(struct comedi_device *dev, int bus, int slot)
 {
-	struct pci_dev *pci_dev;
+	struct pci_dev *pci_dev = NULL;
 	int i;
 
-	for (pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_dev != NULL;
-	     pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) {
+	for_each_pci_dev(pci_dev) {
 		if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) {
 			for (i = 0; i < ARRAY_SIZE(pci6208_boards); i++) {
 				if (pci6208_boards[i].dev_id ==
@@ -408,3 +442,7 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7230.c b/drivers/staging/comedi/drivers/adl_pci7230.c
index 24a82eb9d15..72a7258b5b9 100644
--- a/drivers/staging/comedi/drivers/adl_pci7230.c
+++ b/drivers/staging/comedi/drivers/adl_pci7230.c
@@ -90,7 +90,7 @@ static int adl_pci7230_do_insn_bits(struct comedi_device *dev,
 static int adl_pci7230_attach(struct comedi_device *dev,
 	struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct comedi_subdevice *s;
 	int bus, slot;
 
@@ -106,10 +106,7 @@ static int adl_pci7230_attach(struct comedi_device *dev,
 	if (alloc_subdevices(dev, 2) < 0)
 		return -ENOMEM;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-		pcidev != NULL;
-		pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
 			pcidev->device == PCI_DEVICE_ID_PCI7230) {
 			if (bus || slot) {
@@ -203,4 +200,46 @@ static int adl_pci7230_di_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_adl_pci7230, adl_pci7230_pci_table);
+static int __devinit driver_adl_pci7230_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_adl_pci7230.driver_name);
+}
+
+static void __devexit driver_adl_pci7230_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_adl_pci7230_pci_driver = {
+	.id_table = adl_pci7230_pci_table,
+	.probe = &driver_adl_pci7230_pci_probe,
+	.remove = __devexit_p(&driver_adl_pci7230_pci_remove)
+};
+
+static int __init driver_adl_pci7230_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_adl_pci7230);
+	if (retval < 0)
+		return retval;
+
+	driver_adl_pci7230_pci_driver.name =
+	    (char *)driver_adl_pci7230.driver_name;
+	return pci_register_driver(&driver_adl_pci7230_pci_driver);
+}
+
+static void __exit driver_adl_pci7230_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_adl_pci7230_pci_driver);
+	comedi_driver_unregister(&driver_adl_pci7230);
+}
+
+module_init(driver_adl_pci7230_init_module);
+module_exit(driver_adl_pci7230_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7296.c b/drivers/staging/comedi/drivers/adl_pci7296.c
index 8602865ae6b..f28fe6bec05 100644
--- a/drivers/staging/comedi/drivers/adl_pci7296.c
+++ b/drivers/staging/comedi/drivers/adl_pci7296.c
@@ -77,7 +77,7 @@ static struct comedi_driver driver_adl_pci7296 = {
 static int adl_pci7296_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct comedi_subdevice *s;
 	int bus, slot;
 	int ret;
@@ -94,10 +94,7 @@ static int adl_pci7296_attach(struct comedi_device *dev,
 	if (alloc_subdevices(dev, 4) < 0)
 		return -ENOMEM;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
 		    pcidev->device == PCI_DEVICE_ID_PCI7296) {
 			if (bus || slot) {
@@ -177,4 +174,46 @@ static int adl_pci7296_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_adl_pci7296, adl_pci7296_pci_table);
+static int __devinit driver_adl_pci7296_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_adl_pci7296.driver_name);
+}
+
+static void __devexit driver_adl_pci7296_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_adl_pci7296_pci_driver = {
+	.id_table = adl_pci7296_pci_table,
+	.probe = &driver_adl_pci7296_pci_probe,
+	.remove = __devexit_p(&driver_adl_pci7296_pci_remove)
+};
+
+static int __init driver_adl_pci7296_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_adl_pci7296);
+	if (retval < 0)
+		return retval;
+
+	driver_adl_pci7296_pci_driver.name =
+	    (char *)driver_adl_pci7296.driver_name;
+	return pci_register_driver(&driver_adl_pci7296_pci_driver);
+}
+
+static void __exit driver_adl_pci7296_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_adl_pci7296_pci_driver);
+	comedi_driver_unregister(&driver_adl_pci7296);
+}
+
+module_init(driver_adl_pci7296_init_module);
+module_exit(driver_adl_pci7296_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci7432.c b/drivers/staging/comedi/drivers/adl_pci7432.c
index b5a9499e438..262da7b29b2 100644
--- a/drivers/staging/comedi/drivers/adl_pci7432.c
+++ b/drivers/staging/comedi/drivers/adl_pci7432.c
@@ -86,7 +86,7 @@ static int adl_pci7432_do_insn_bits(struct comedi_device *dev,
 static int adl_pci7432_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct comedi_subdevice *s;
 	int bus, slot;
 
@@ -102,10 +102,7 @@ static int adl_pci7432_attach(struct comedi_device *dev,
 	if (alloc_subdevices(dev, 2) < 0)
 		return -ENOMEM;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
 		    pcidev->device == PCI_DEVICE_ID_PCI7432) {
 			if (bus || slot) {
@@ -210,4 +207,46 @@ static int adl_pci7432_di_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_adl_pci7432, adl_pci7432_pci_table);
+static int __devinit driver_adl_pci7432_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_adl_pci7432.driver_name);
+}
+
+static void __devexit driver_adl_pci7432_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_adl_pci7432_pci_driver = {
+	.id_table = adl_pci7432_pci_table,
+	.probe = &driver_adl_pci7432_pci_probe,
+	.remove = __devexit_p(&driver_adl_pci7432_pci_remove)
+};
+
+static int __init driver_adl_pci7432_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_adl_pci7432);
+	if (retval < 0)
+		return retval;
+
+	driver_adl_pci7432_pci_driver.name =
+	    (char *)driver_adl_pci7432.driver_name;
+	return pci_register_driver(&driver_adl_pci7432_pci_driver);
+}
+
+static void __exit driver_adl_pci7432_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_adl_pci7432_pci_driver);
+	comedi_driver_unregister(&driver_adl_pci7432);
+}
+
+module_init(driver_adl_pci7432_init_module);
+module_exit(driver_adl_pci7432_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci8164.c b/drivers/staging/comedi/drivers/adl_pci8164.c
index da256a1e0b4..767a594935c 100644
--- a/drivers/staging/comedi/drivers/adl_pci8164.c
+++ b/drivers/staging/comedi/drivers/adl_pci8164.c
@@ -125,7 +125,7 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
 static int adl_pci8164_attach(struct comedi_device *dev,
 			      struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct comedi_subdevice *s;
 	int bus, slot;
 
@@ -142,10 +142,7 @@ static int adl_pci8164_attach(struct comedi_device *dev,
 	if (alloc_subdevices(dev, 4) < 0)
 		return -ENOMEM;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_ADLINK &&
 		    pcidev->device == PCI_DEVICE_ID_PCI8164) {
 			if (bus || slot) {
@@ -389,4 +386,46 @@ static int adl_pci8164_insn_write_buf1(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_adl_pci8164, adl_pci8164_pci_table);
+static int __devinit driver_adl_pci8164_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_adl_pci8164.driver_name);
+}
+
+static void __devexit driver_adl_pci8164_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_adl_pci8164_pci_driver = {
+	.id_table = adl_pci8164_pci_table,
+	.probe = &driver_adl_pci8164_pci_probe,
+	.remove = __devexit_p(&driver_adl_pci8164_pci_remove)
+};
+
+static int __init driver_adl_pci8164_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_adl_pci8164);
+	if (retval < 0)
+		return retval;
+
+	driver_adl_pci8164_pci_driver.name =
+	    (char *)driver_adl_pci8164.driver_name;
+	return pci_register_driver(&driver_adl_pci8164_pci_driver);
+}
+
+static void __exit driver_adl_pci8164_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_adl_pci8164_pci_driver);
+	comedi_driver_unregister(&driver_adl_pci8164);
+}
+
+module_init(driver_adl_pci8164_init_module);
+module_exit(driver_adl_pci8164_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci9111.c b/drivers/staging/comedi/drivers/adl_pci9111.c
index 39d112b708e..b2a02b0f569 100644
--- a/drivers/staging/comedi/drivers/adl_pci9111.c
+++ b/drivers/staging/comedi/drivers/adl_pci9111.c
@@ -38,8 +38,8 @@ Supports:
   - do_insn read/write
   - ai_do_cmd mode with the following sources:
 
-    - start_src 		TRIG_NOW
-    - scan_begin_src 		TRIG_FOLLOW	TRIG_TIMER	TRIG_EXT
+    - start_src			TRIG_NOW
+    - scan_begin_src		TRIG_FOLLOW	TRIG_TIMER	TRIG_EXT
     - convert_src				TRIG_TIMER	TRIG_EXT
     - scan_end_src		TRIG_COUNT
     - stop_src			TRIG_COUNT	TRIG_NONE
@@ -68,8 +68,9 @@ CHANGELOG:
 TODO:
 
   - Really test implemented functionality.
-  - Add support for the PCI-9111DG with a probe routine to identify the card type
-    (perhaps with the help of the channel number readback of the A/D Data register).
+  - Add support for the PCI-9111DG with a probe routine to identify the card
+    type (perhaps with the help of the channel number readback of the A/D Data
+    register).
   - Add external multiplexer support.
 
 */
@@ -83,12 +84,12 @@ TODO:
 #include "comedi_pci.h"
 #include "comedi_fc.h"
 
-#define PCI9111_DRIVER_NAME 	"adl_pci9111"
-#define PCI9111_HR_DEVICE_ID 	0x9111
+#define PCI9111_DRIVER_NAME	"adl_pci9111"
+#define PCI9111_HR_DEVICE_ID	0x9111
 
 /*  TODO: Add other pci9111 board id */
 
-#define PCI9111_IO_RANGE 	0x0100
+#define PCI9111_IO_RANGE	0x0100
 
 #define PCI9111_FIFO_HALF_SIZE	512
 
@@ -134,27 +135,29 @@ TODO:
 
 /* IO address map */
 
-#define PCI9111_REGISTER_AD_FIFO_VALUE 			0x00	/*  AD Data stored in FIFO */
-#define PCI9111_REGISTER_DA_OUTPUT 			0x00
-#define PCI9111_REGISTER_DIGITAL_IO 			0x02
-#define PCI9111_REGISTER_EXTENDED_IO_PORTS 		0x04
-#define PCI9111_REGISTER_AD_CHANNEL_CONTROL 		0x06	/*  Channel selection */
-#define PCI9111_REGISTER_AD_CHANNEL_READBACK 		0x06
-#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE 		0x08
-#define PCI9111_REGISTER_RANGE_STATUS_READBACK 		0x08
-#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL 		0x0A
-#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK 	0x0A
-#define PCI9111_REGISTER_SOFTWARE_TRIGGER 		0x0E
-#define PCI9111_REGISTER_INTERRUPT_CONTROL 		0x0C
+#define PCI9111_REGISTER_AD_FIFO_VALUE			0x00 /* AD Data stored
+								in FIFO */
+#define PCI9111_REGISTER_DA_OUTPUT			0x00
+#define PCI9111_REGISTER_DIGITAL_IO			0x02
+#define PCI9111_REGISTER_EXTENDED_IO_PORTS		0x04
+#define PCI9111_REGISTER_AD_CHANNEL_CONTROL		0x06 /* Channel
+								selection */
+#define PCI9111_REGISTER_AD_CHANNEL_READBACK		0x06
+#define PCI9111_REGISTER_INPUT_SIGNAL_RANGE		0x08
+#define PCI9111_REGISTER_RANGE_STATUS_READBACK		0x08
+#define PCI9111_REGISTER_TRIGGER_MODE_CONTROL		0x0A
+#define PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK	0x0A
+#define PCI9111_REGISTER_SOFTWARE_TRIGGER		0x0E
+#define PCI9111_REGISTER_INTERRUPT_CONTROL		0x0C
 #define PCI9111_REGISTER_8254_COUNTER_0			0x40
 #define PCI9111_REGISTER_8254_COUNTER_1			0x42
-#define PCI9111_REGISTER_8254_COUNTER_2 		0X44
+#define PCI9111_REGISTER_8254_COUNTER_2			0X44
 #define PCI9111_REGISTER_8254_CONTROL			0x46
-#define PCI9111_REGISTER_INTERRUPT_CLEAR 		0x48
+#define PCI9111_REGISTER_INTERRUPT_CLEAR		0x48
 
-#define PCI9111_TRIGGER_MASK 				0x0F
-#define PCI9111_PTRG_OFF 				(0 << 3)
-#define PCI9111_PTRG_ON 				(1 << 3)
+#define PCI9111_TRIGGER_MASK				0x0F
+#define PCI9111_PTRG_OFF				(0 << 3)
+#define PCI9111_PTRG_ON					(1 << 3)
 #define PCI9111_EITS_EXTERNAL				(1 << 2)
 #define PCI9111_EITS_INTERNAL				(0 << 2)
 #define PCI9111_TPST_SOFTWARE_TRIGGER			(0 << 1)
@@ -164,9 +167,9 @@ TODO:
 
 #define PCI9111_ISC0_SET_IRQ_ON_ENDING_OF_AD_CONVERSION (0 << 0)
 #define PCI9111_ISC0_SET_IRQ_ON_FIFO_HALF_FULL		(1 << 0)
-#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK  		(0 << 1)
-#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG 		(1 << 1)
-#define PCI9111_FFEN_SET_FIFO_ENABLE 			(0 << 2)
+#define PCI9111_ISC1_SET_IRQ_ON_TIMER_TICK		(0 << 1)
+#define PCI9111_ISC1_SET_IRQ_ON_EXT_TRG			(1 << 1)
+#define PCI9111_FFEN_SET_FIFO_ENABLE			(0 << 2)
 #define PCI9111_FFEN_SET_FIFO_DISABLE			(1 << 2)
 
 #define PCI9111_CHANNEL_MASK				0x0F
@@ -177,7 +180,7 @@ TODO:
 #define PCI9111_FIFO_FULL_MASK				0x40
 #define PCI9111_AD_BUSY_MASK				0x80
 
-#define PCI9111_IO_BASE dev->iobase
+#define PCI9111_IO_BASE (dev->iobase)
 
 /*
  * Define inlined function
@@ -189,8 +192,9 @@ TODO:
 #define pci9111_trigger_and_autoscan_set(flags) \
   outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_TRIGGER_MODE_CONTROL)
 
-#define pci9111_interrupt_and_fifo_get() \
-  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) &0x03)
+#define pci9111_interrupt_and_fifo_get()				   \
+  ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_MODE_INTERRUPT_READBACK) >> 4) \
+   &0x03)
 
 #define pci9111_interrupt_and_fifo_set(flags) \
   outb(flags, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
@@ -201,45 +205,56 @@ TODO:
 #define pci9111_software_trigger() \
   outb(0, PCI9111_IO_BASE+PCI9111_REGISTER_SOFTWARE_TRIGGER)
 
-#define pci9111_fifo_reset() \
-  outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
-  outb(PCI9111_FFEN_SET_FIFO_DISABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL); \
-  outb(PCI9111_FFEN_SET_FIFO_ENABLE, PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL)
+#define pci9111_fifo_reset() do {					\
+  outb(PCI9111_FFEN_SET_FIFO_ENABLE,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL);		\
+  outb(PCI9111_FFEN_SET_FIFO_DISABLE,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL);		\
+  outb(PCI9111_FFEN_SET_FIFO_ENABLE,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_INTERRUPT_CONTROL);		\
+  } while (0)
 
 #define pci9111_is_fifo_full() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_FULL_MASK)==0)
+    PCI9111_FIFO_FULL_MASK) == 0)
 
 #define pci9111_is_fifo_half_full() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_HALF_FULL_MASK)==0)
+    PCI9111_FIFO_HALF_FULL_MASK) == 0)
 
 #define pci9111_is_fifo_empty() \
   ((inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)& \
-    PCI9111_FIFO_EMPTY_MASK)==0)
+    PCI9111_FIFO_EMPTY_MASK) == 0)
 
-#define pci9111_ai_channel_set(channel) \
-  outb((channel)&PCI9111_CHANNEL_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
+#define pci9111_ai_channel_set(channel)					\
+  outb((channel)&PCI9111_CHANNEL_MASK,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_CONTROL)
 
-#define pci9111_ai_channel_get() \
-  inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)&PCI9111_CHANNEL_MASK
+#define pci9111_ai_channel_get()					\
+  (inb(PCI9111_IO_BASE+PCI9111_REGISTER_AD_CHANNEL_READBACK)		\
+   &PCI9111_CHANNEL_MASK)
 
-#define pci9111_ai_range_set(range) \
-  outb((range)&PCI9111_RANGE_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
+#define pci9111_ai_range_set(range)					\
+  outb((range)&PCI9111_RANGE_MASK,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_INPUT_SIGNAL_RANGE)
 
-#define pci9111_ai_range_get() \
-  inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)&PCI9111_RANGE_MASK
+#define pci9111_ai_range_get()						\
+  (inb(PCI9111_IO_BASE+PCI9111_REGISTER_RANGE_STATUS_READBACK)		\
+   &PCI9111_RANGE_MASK)
 
-#define pci9111_ai_get_data() \
-  ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)&PCI9111_AI_RESOLUTION_MASK) \
-  ^ PCI9111_AI_RESOLUTION_2_CMP_BIT
+#define pci9111_ai_get_data()						\
+  (((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)>>4)		\
+    &PCI9111_AI_RESOLUTION_MASK)					\
+   ^ PCI9111_AI_RESOLUTION_2_CMP_BIT)
 
-#define pci9111_hr_ai_get_data() \
-  (inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE) & PCI9111_HR_AI_RESOLUTION_MASK) \
-  ^ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT
+#define pci9111_hr_ai_get_data()					\
+  ((inw(PCI9111_IO_BASE+PCI9111_REGISTER_AD_FIFO_VALUE)			\
+    & PCI9111_HR_AI_RESOLUTION_MASK)					\
+   ^ PCI9111_HR_AI_RESOLUTION_2_CMP_BIT)
 
-#define pci9111_ao_set_data(data) \
-  outw(data&PCI9111_AO_RESOLUTION_MASK, PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
+#define pci9111_ao_set_data(data)					\
+  outw(data&PCI9111_AO_RESOLUTION_MASK,					\
+       PCI9111_IO_BASE+PCI9111_REGISTER_DA_OUTPUT)
 
 #define pci9111_di_get_bits() \
   inw(PCI9111_IO_BASE+PCI9111_REGISTER_DIGITAL_IO)
@@ -284,12 +299,11 @@ static const struct comedi_lrange pci9111_hr_ai_range = {
 };
 
 static DEFINE_PCI_DEVICE_TABLE(pci9111_pci_table) = {
-	{
-	PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID,
-		    PCI_ANY_ID, 0, 0, 0},
-	    /* { PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */
-	{
-	0}
+	{ PCI_VENDOR_ID_ADLINK, PCI9111_HR_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  0, 0, 0 },
+	/* { PCI_VENDOR_ID_ADLINK, PCI9111_HG_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 *   0, 0, 0 }, */
+	{ 0 }
 };
 
 MODULE_DEVICE_TABLE(pci, pci9111_pci_table);
@@ -337,7 +351,43 @@ static struct comedi_driver pci9111_driver = {
 	.detach = pci9111_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(pci9111_driver, pci9111_pci_table);
+static int __devinit pci9111_driver_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, pci9111_driver.driver_name);
+}
+
+static void __devexit pci9111_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver pci9111_driver_pci_driver = {
+	.id_table = pci9111_pci_table,
+	.probe = &pci9111_driver_pci_probe,
+	.remove = __devexit_p(&pci9111_driver_pci_remove)
+};
+
+static int __init pci9111_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&pci9111_driver);
+	if (retval < 0)
+		return retval;
+
+	pci9111_driver_pci_driver.name = (char *)pci9111_driver.driver_name;
+	return pci_register_driver(&pci9111_driver_pci_driver);
+}
+
+static void __exit pci9111_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&pci9111_driver_pci_driver);
+	comedi_driver_unregister(&pci9111_driver);
+}
+
+module_init(pci9111_driver_init_module);
+module_exit(pci9111_driver_cleanup_module);
 
 /*  Private data structure */
 
@@ -345,7 +395,8 @@ struct pci9111_private_data {
 	struct pci_dev *pci_device;
 	unsigned long io_range;	/*  PCI6503 io range */
 
-	unsigned long lcr_io_base;	/*  Local configuration register base address */
+	unsigned long lcr_io_base; /* Local configuration register base
+				    * address */
 	unsigned long lcr_io_range;
 
 	int stop_counter;
@@ -358,7 +409,8 @@ struct pci9111_private_data {
 
 	int ao_readback;	/*  Last written analog output data */
 
-	unsigned int timer_divisor_1;	/*  Divisor values for the 8254 timer pacer */
+	unsigned int timer_divisor_1; /* Divisor values for the 8254 timer
+				       * pacer */
 	unsigned int timer_divisor_2;
 
 	int is_valid;		/*  Is device valid */
@@ -366,7 +418,7 @@ struct pci9111_private_data {
 	short ai_bounce_buffer[2 * PCI9111_FIFO_HALF_SIZE];
 };
 
-#define dev_private 	((struct pci9111_private_data *)dev->private)
+#define dev_private	((struct pci9111_private_data *)dev->private)
 
 /*  ------------------------------------------------------------------ */
 /*  PLX9050 SECTION */
@@ -548,10 +600,12 @@ static int pci9111_ai_cancel(struct comedi_device *dev,
 
 /*  Test analog input command */
 
-#define pci9111_check_trigger_src(src, flags) \
-  tmp = src; \
-  src &= flags; \
-  if (!src || tmp != src) error++
+#define pci9111_check_trigger_src(src, flags)	do {			\
+		tmp = src;						\
+		src &= flags;						\
+		if (!src || tmp != src)					\
+			error++;					\
+	} while (false);
 
 static int
 pci9111_ai_do_cmd_test(struct comedi_device *dev,
@@ -575,7 +629,8 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
 	if (error)
 		return 1;
 
-	/*  step 2 : make sure trigger sources are unique and mutually compatible */
+	/*  step 2 : make sure trigger sources are unique and mutually
+	 *  compatible */
 
 	if (cmd->start_src != TRIG_NOW)
 		error++;
@@ -637,7 +692,8 @@ pci9111_ai_do_cmd_test(struct comedi_device *dev,
 		cmd->scan_begin_arg = board->ai_acquisition_period_min_ns;
 		error++;
 	}
-	if ((cmd->scan_begin_src == TRIG_FOLLOW) && (cmd->scan_begin_arg != 0)) {
+	if ((cmd->scan_begin_src == TRIG_FOLLOW)
+	    && (cmd->scan_begin_arg != 0)) {
 		cmd->scan_begin_arg = 0;
 		error++;
 	}
@@ -1216,7 +1272,7 @@ static int pci9111_attach(struct comedi_device *dev,
 {
 	struct comedi_subdevice *subdevice;
 	unsigned long io_base, io_range, lcr_io_base, lcr_io_range;
-	struct pci_dev *pci_device;
+	struct pci_dev *pci_device = NULL;
 	int error, i;
 	const struct pci9111_board *board;
 
@@ -1226,17 +1282,17 @@ static int pci9111_attach(struct comedi_device *dev,
 
 	printk("comedi%d: " PCI9111_DRIVER_NAME " driver\n", dev->minor);
 
-	for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_device != NULL;
-	     pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) {
+	for_each_pci_dev(pci_device) {
 		if (pci_device->vendor == PCI_VENDOR_ID_ADLINK) {
 			for (i = 0; i < pci9111_board_nbr; i++) {
 				if (pci9111_boards[i].device_id ==
 				    pci_device->device) {
-					/*  was a particular bus/slot requested? */
+					/* was a particular bus/slot
+					 * requested? */
 					if ((it->options[0] != 0)
 					    || (it->options[1] != 0)) {
-						/*  are we on the wrong bus/slot? */
+						/* are we on the wrong
+						 * bus/slot? */
 						if (pci_device->bus->number !=
 						    it->options[0]
 						    ||
@@ -1272,7 +1328,8 @@ found:
 
 	/*  TODO: Warn about non-tested boards. */
 
-	/*  Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
+	/*  Read local configuration register base address
+	 *  [PCI_BASE_ADDRESS #1]. */
 
 	lcr_io_base = pci_resource_start(pci_device, 1);
 	lcr_io_range = pci_resource_len(pci_device, 1);
@@ -1399,3 +1456,7 @@ static int pci9111_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index ccef549778e..b0e39cb7477 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -289,7 +289,43 @@ static struct comedi_driver driver_pci9118 = {
 	.offset = sizeof(struct boardtype),
 };
 
-COMEDI_PCI_INITCLEANUP(driver_pci9118, pci9118_pci_table);
+static int __devinit driver_pci9118_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pci9118.driver_name);
+}
+
+static void __devexit driver_pci9118_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pci9118_pci_driver = {
+	.id_table = pci9118_pci_table,
+	.probe = &driver_pci9118_pci_probe,
+	.remove = __devexit_p(&driver_pci9118_pci_remove)
+};
+
+static int __init driver_pci9118_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci9118);
+	if (retval < 0)
+		return retval;
+
+	driver_pci9118_pci_driver.name = (char *)driver_pci9118.driver_name;
+	return pci_register_driver(&driver_pci9118_pci_driver);
+}
+
+static void __exit driver_pci9118_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci9118_pci_driver);
+	comedi_driver_unregister(&driver_pci9118);
+}
+
+module_init(driver_pci9118_init_module);
+module_exit(driver_pci9118_cleanup_module);
 
 struct pci9118_private {
 	unsigned long iobase_a;	/* base+size for AMCC chip */
@@ -2432,3 +2468,7 @@ static int pci9118_detach(struct comedi_device *dev)
 /*
 ==============================================================================
 */
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index f3ba645bf63..4b470000b69 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -402,4 +402,19 @@ static int adq12b_do_insn_bits(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_adq12b);
+static int __init driver_adq12b_init_module(void)
+{
+	return comedi_driver_register(&driver_adq12b);
+}
+
+static void __exit driver_adq12b_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_adq12b);
+}
+
+module_init(driver_adq12b_init_module);
+module_exit(driver_adq12b_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 67c4f11a36a..bdd6954cad9 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -19,7 +19,7 @@
 /*
 Driver: adv_pci1710
 Description: Advantech PCI-1710, PCI-1710HG, PCI-1711, PCI-1713,
-             Advantech PCI-1720, PCI-1731
+	     Advantech PCI-1720, PCI-1731
 Author: Michal Dobes <dobes@tesnet.cz>
 Devices: [Advantech] PCI-1710 (adv_pci1710), PCI-1710HG (pci1710hg),
   PCI-1711 (adv_pci1710), PCI-1713, PCI-1720,
@@ -37,8 +37,8 @@ PCI driver.
 Configuration options:
   [0] - PCI bus of device (optional)
   [1] - PCI slot of device (optional)
-          If bus/slot is not specified, the first available PCI
-          device will be used.
+	If bus/slot is not specified, the first available PCI
+	device will be used.
 */
 
 #include <linux/interrupt.h>
@@ -50,7 +50,9 @@ Configuration options:
 #include "8253.h"
 #include "amcc_s5933.h"
 
-#define PCI171x_PARANOIDCHECK	/* if defined, then is used code which control correct channel number on every 12 bit sample */
+#define PCI171x_PARANOIDCHECK	/* if defined, then is used code which control
+				 * correct channel number on every 12 bit
+				 * sample */
 
 #undef PCI171X_EXTDEBUG
 
@@ -70,8 +72,8 @@ Configuration options:
 #define TYPE_PCI1713	2
 #define TYPE_PCI1720	3
 
-#define IORANGE_171x 	32
-#define IORANGE_1720 	16
+#define IORANGE_171x	32
+#define IORANGE_1720	16
 
 #define PCI171x_AD_DATA	 0	/* R:   A/D data */
 #define PCI171x_SOFTTRG	 0	/* W:   soft trigger for A/D */
@@ -91,13 +93,15 @@ Configuration options:
 #define PCI171x_CNT2	28	/* R/W: 8254 counter 2 */
 #define PCI171x_CNTCTRL	30	/* W:   8254 counter control */
 
-/* upper bits from status register (PCI171x_STATUS) (lower is same woth control reg) */
+/* upper bits from status register (PCI171x_STATUS) (lower is same with control
+ * reg) */
 #define	Status_FE	0x0100	/* 1=FIFO is empty */
 #define Status_FH	0x0200	/* 1=FIFO is half full */
 #define Status_FF	0x0400	/* 1=FIFO is full, fatal error */
 #define Status_IRQ	0x0800	/* 1=IRQ occured */
 /* bits from control register (PCI171x_CONTROL) */
-#define Control_CNT0	0x0040	/* 1=CNT0 have external source, 0=have internal 100kHz source */
+#define Control_CNT0	0x0040	/* 1=CNT0 have external source,
+				 * 0=have internal 100kHz source */
 #define Control_ONEFH	0x0020	/* 1=IRQ on FIFO is half full, 0=every sample */
 #define Control_IRQEN	0x0010	/* 1=enable IRQ */
 #define Control_GATE	0x0008	/* 1=enable external trigger GATE (8254?) */
@@ -112,7 +116,8 @@ Configuration options:
 #define Counter_RW0     0x0010	/* RW0/RW1 select read/write mode */
 #define Counter_RW1     0x0020
 #define Counter_SC0     0x0040	/* Select Counter. Only 00 or 11 may */
-#define Counter_SC1     0x0080	/* be used, 00 for CNT0, 11 for read-back command */
+#define Counter_SC1     0x0080	/* be used, 00 for CNT0,
+				 * 11 for read-back command */
 
 #define PCI1720_DA0	 0	/* W:   D/A register 0 */
 #define PCI1720_DA1	 2	/* W:   D/A register 1 */
@@ -138,8 +143,8 @@ static const struct comedi_lrange range_pci1710_3 = { 9, {
 							  }
 };
 
-static const char range_codes_pci1710_3[] =
-    { 0x00, 0x01, 0x02, 0x03, 0x04, 0x10, 0x11, 0x12, 0x13 };
+static const char range_codes_pci1710_3[] = { 0x00, 0x01, 0x02, 0x03, 0x04,
+					      0x10, 0x11, 0x12, 0x13 };
 
 static const struct comedi_lrange range_pci1710hg = { 12, {
 							   BIP_RANGE(5),
@@ -157,10 +162,9 @@ static const struct comedi_lrange range_pci1710hg = { 12, {
 							   }
 };
 
-static const char range_codes_pci1710hg[] =
-    { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x10, 0x11, 0x12,
-	0x13
-};
+static const char range_codes_pci1710hg[] = { 0x00, 0x01, 0x02, 0x03, 0x04,
+					      0x05, 0x06, 0x07, 0x10, 0x11,
+					      0x12, 0x13 };
 
 static const struct comedi_lrange range_pci17x1 = { 5, {
 							BIP_RANGE(10),
@@ -301,7 +305,8 @@ struct pci1710_private {
 	unsigned int ai_timer1;	/*  timers */
 	unsigned int ai_timer2;
 	short ao_data[4];	/*  data output buffer */
-	unsigned int cnt0_write_wait;	/*  after a write, wait for update of the internal state */
+	unsigned int cnt0_write_wait;	/* after a write, wait for update of the
+					 * internal state */
 };
 
 #define devpriv ((struct pci1710_private *)dev->private)
@@ -324,7 +329,9 @@ static int pci1710_reset(struct comedi_device *dev);
 static int pci171x_ai_cancel(struct comedi_device *dev,
 			     struct comedi_subdevice *s);
 
-static const unsigned int muxonechan[] = { 0x0000, 0x0101, 0x0202, 0x0303, 0x0404, 0x0505, 0x0606, 0x0707,	/*  used for gain list programming */
+/*  used for gain list programming */
+static const unsigned int muxonechan[] = {
+	0x0000, 0x0101, 0x0202, 0x0303, 0x0404, 0x0505, 0x0606, 0x0707,
 	0x0808, 0x0909, 0x0a0a, 0x0b0b, 0x0c0c, 0x0d0d, 0x0e0e, 0x0f0f,
 	0x1010, 0x1111, 0x1212, 0x1313, 0x1414, 0x1515, 0x1616, 0x1717,
 	0x1818, 0x1919, 0x1a1a, 0x1b1b, 0x1c1c, 0x1d1d, 0x1e1e, 0x1f1f
@@ -774,7 +781,8 @@ static void interrupt_pci1710_half_fifo(void *d)
 	}
 
 	if (!devpriv->neverending_ai)
-		if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/* all data sampled */
+		if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data
+								    sampled */
 			pci171x_ai_cancel(dev, s);
 			s->async->events |= COMEDI_CB_EOA;
 			comedi_event(dev, s);
@@ -1559,7 +1567,8 @@ static int pci1710_attach(struct comedi_device *dev,
 		s->maxdata = 1;
 		s->len_chanlist = this_board->n_dochan;
 		s->range_table = &range_digital;
-		s->io_bits = (1 << this_board->n_dochan) - 1;	/* all bits output */
+		/* all bits output */
+		s->io_bits = (1 << this_board->n_dochan) - 1;
 		s->state = 0;
 		s->insn_bits = pci171x_insn_bits_do;
 		subdev++;
@@ -1609,7 +1618,47 @@ static int pci1710_detach(struct comedi_device *dev)
 /*
 ==============================================================================
 */
-COMEDI_PCI_INITCLEANUP(driver_pci1710, pci1710_pci_table);
+static int __devinit driver_pci1710_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pci1710.driver_name);
+}
+
+static void __devexit driver_pci1710_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pci1710_pci_driver = {
+	.id_table = pci1710_pci_table,
+	.probe = &driver_pci1710_pci_probe,
+	.remove = __devexit_p(&driver_pci1710_pci_remove)
+};
+
+static int __init driver_pci1710_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci1710);
+	if (retval < 0)
+		return retval;
+
+	driver_pci1710_pci_driver.name = (char *)driver_pci1710.driver_name;
+	return pci_register_driver(&driver_pci1710_pci_driver);
+}
+
+static void __exit driver_pci1710_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci1710_pci_driver);
+	comedi_driver_unregister(&driver_pci1710);
+}
+
+module_init(driver_pci1710_init_module);
+module_exit(driver_pci1710_cleanup_module);
 /*
 ==============================================================================
 */
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adv_pci1723.c b/drivers/staging/comedi/drivers/adv_pci1723.c
index 9fe8fcc7f1d..b133bb84c4f 100644
--- a/drivers/staging/comedi/drivers/adv_pci1723.c
+++ b/drivers/staging/comedi/drivers/adv_pci1723.c
@@ -496,4 +496,44 @@ static int pci1723_detach(struct comedi_device *dev)
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(driver_pci1723, pci1723_pci_table);
+static int __devinit driver_pci1723_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pci1723.driver_name);
+}
+
+static void __devexit driver_pci1723_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pci1723_pci_driver = {
+	.id_table = pci1723_pci_table,
+	.probe = &driver_pci1723_pci_probe,
+	.remove = __devexit_p(&driver_pci1723_pci_remove)
+};
+
+static int __init driver_pci1723_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci1723);
+	if (retval < 0)
+		return retval;
+
+	driver_pci1723_pci_driver.name = (char *)driver_pci1723.driver_name;
+	return pci_register_driver(&driver_pci1723_pci_driver);
+}
+
+static void __exit driver_pci1723_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci1723_pci_driver);
+	comedi_driver_unregister(&driver_pci1723);
+}
+
+module_init(driver_pci1723_init_module);
+module_exit(driver_pci1723_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/adv_pci_dio.c b/drivers/staging/comedi/drivers/adv_pci_dio.c
index e424a0c7d34..d018bb4e289 100644
--- a/drivers/staging/comedi/drivers/adv_pci_dio.c
+++ b/drivers/staging/comedi/drivers/adv_pci_dio.c
@@ -8,8 +8,8 @@
 /*
 Driver: adv_pci_dio
 Description: Advantech PCI-1730, PCI-1733, PCI-1734, PCI-1735U,
-             PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E,
-             PCI-1754, PCI-1756, PCI-1762
+	PCI-1736UP, PCI-1750, PCI-1751, PCI-1752, PCI-1753/E,
+	PCI-1754, PCI-1756, PCI-1762
 Author: Michal Dobes <dobes@tesnet.cz>
 Devices: [Advantech] PCI-1730 (adv_pci_dio), PCI-1733,
   PCI-1734, PCI-1735U, PCI-1736UP, PCI-1750,
@@ -24,8 +24,8 @@ This driver supports now only insn interface for DI/DO/DIO.
 Configuration options:
   [0] - PCI bus of device (optional)
   [1] - PCI slot of device (optional)
-          If bus/slot is not specified, the first available PCI
-          device will be used.
+	If bus/slot is not specified, the first available PCI
+	device will be used.
 
 */
 
@@ -67,9 +67,12 @@ enum hw_io_access {
 
 #define MAX_DI_SUBDEVS	2	/* max number of DI subdevices per card */
 #define MAX_DO_SUBDEVS	2	/* max number of DO subdevices per card */
-#define MAX_DIO_SUBDEVG	2	/* max number of DIO subdevices group per card */
-#define MAX_8254_SUBDEVS   1	/* max number of 8254 counter subdevs per card */
-				/* (could be more than one 8254 per subdevice) */
+#define MAX_DIO_SUBDEVG	2	/* max number of DIO subdevices group per
+				 * card */
+#define MAX_8254_SUBDEVS   1	/* max number of 8254 counter subdevs per
+				 * card */
+				/* (could be more than one 8254 per
+				 * subdevice) */
 
 #define SIZE_8254	   4	/* 8254 IO space length */
 #define SIZE_8255	   4	/* 8255 IO space length */
@@ -84,7 +87,8 @@ enum hw_io_access {
 #define PCI1730_DO	   2	/* W:   Digital output 0-15 */
 #define PCI1733_IDI	   0	/* R:   Isolated digital input  0-31 */
 #define	PCI1730_3_INT_EN	0x08	/* R/W: enable/disable interrupts */
-#define	PCI1730_3_INT_RF	0x0c	/* R/W: set falling/raising edge for interrupts */
+#define	PCI1730_3_INT_RF	0x0c	/* R/W: set falling/raising edge for
+					 * interrupts */
 #define	PCI1730_3_INT_CLR	0x10	/* R/W: clear interrupts */
 #define PCI1734_IDO	   0	/* W:   Isolated digital output 0-31 */
 #define PCI173x_BOARDID	   4	/* R:   Board I/D switch for 1730/3/4 */
@@ -99,7 +103,8 @@ enum hw_io_access {
 #define PCI1736_IDI        0	/* R:   Isolated digital input  0-15 */
 #define PCI1736_IDO        0	/* W:   Isolated digital output 0-15 */
 #define PCI1736_3_INT_EN        0x08	/* R/W: enable/disable interrupts */
-#define PCI1736_3_INT_RF        0x0c	/* R/W: set falling/raising edge for interrupts */
+#define PCI1736_3_INT_RF        0x0c	/* R/W: set falling/raising edge for
+					 * interrupts */
 #define PCI1736_3_INT_CLR       0x10	/* R/W: clear interrupts */
 #define PCI1736_BOARDID    4	/* R:   Board I/D switch for 1736UP */
 #define PCI1736_MAINREG    0	/* Normal register (2) doesn't work */
@@ -161,37 +166,66 @@ enum hw_io_access {
 #define INTCSR3		0x3b
 
 /*  PCI-1760 mailbox commands */
-#define CMD_ClearIMB2		0x00	/* Clear IMB2 status and return actaul DI status in IMB3 */
+#define CMD_ClearIMB2		0x00	/* Clear IMB2 status and return actual
+					 * DI status in IMB3 */
 #define CMD_SetRelaysOutput	0x01	/* Set relay output from OMB0 */
 #define CMD_GetRelaysStatus	0x02	/* Get relay status to IMB0 */
-#define CMD_ReadCurrentStatus	0x07	/* Read the current status of the register in OMB0, result in IMB0 */
-#define CMD_ReadFirmwareVersion	0x0e	/* Read the firmware ver., result in IMB1.IMB0 */
-#define CMD_ReadHardwareVersion	0x0f	/* Read the hardware ver., result in IMB1.IMB0 */
-#define CMD_EnableIDIFilters	0x20	/* Enable IDI filters based on bits in OMB0 */
-#define CMD_EnableIDIPatternMatch 0x21	/* Enable IDI pattern match based on bits in OMB0 */
-#define CMD_SetIDIPatternMatch	0x22	/* Enable IDI pattern match based on bits in OMB0 */
-#define CMD_EnableIDICounters	0x28	/* Enable IDI counters based on bits in OMB0 */
-#define CMD_ResetIDICounters	0x29	/* Reset IDI counters based on bits in OMB0 to its reset values */
-#define CMD_OverflowIDICounters	0x2a	/* Enable IDI counters overflow interrupts  based on bits in OMB0 */
-#define CMD_MatchIntIDICounters	0x2b	/* Enable IDI counters match value interrupts  based on bits in OMB0 */
-#define CMD_EdgeIDICounters	0x2c	/* Set IDI up counters count edge (bit=0 - rising, =1 - falling) */
-#define CMD_GetIDICntCurValue	0x2f	/* Read IDI{OMB0} up counter current value */
-#define CMD_SetIDI0CntResetValue 0x40	/* Set IDI0 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI1CntResetValue 0x41	/* Set IDI1 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI2CntResetValue 0x42	/* Set IDI2 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI3CntResetValue 0x43	/* Set IDI3 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI4CntResetValue 0x44	/* Set IDI4 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI5CntResetValue 0x45	/* Set IDI5 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI6CntResetValue 0x46	/* Set IDI6 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI7CntResetValue 0x47	/* Set IDI7 Counter Reset Value 256*OMB1+OMB0 */
-#define CMD_SetIDI0CntMatchValue 0x48	/* Set IDI0 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI1CntMatchValue 0x49	/* Set IDI1 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI2CntMatchValue 0x4a	/* Set IDI2 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI3CntMatchValue 0x4b	/* Set IDI3 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI4CntMatchValue 0x4c	/* Set IDI4 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI5CntMatchValue 0x4d	/* Set IDI5 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI6CntMatchValue 0x4e	/* Set IDI6 Counter Match Value 256*OMB1+OMB0 */
-#define CMD_SetIDI7CntMatchValue 0x4f	/* Set IDI7 Counter Match Value 256*OMB1+OMB0 */
+#define CMD_ReadCurrentStatus	0x07	/* Read the current status of the
+					 * register in OMB0, result in IMB0 */
+#define CMD_ReadFirmwareVersion	0x0e	/* Read the firmware ver., result in
+					 * IMB1.IMB0 */
+#define CMD_ReadHardwareVersion	0x0f	/* Read the hardware ver., result in
+					 * IMB1.IMB0 */
+#define CMD_EnableIDIFilters	0x20	/* Enable IDI filters based on bits in
+					 * OMB0 */
+#define CMD_EnableIDIPatternMatch 0x21	/* Enable IDI pattern match based on
+					 * bits in OMB0 */
+#define CMD_SetIDIPatternMatch	0x22	/* Enable IDI pattern match based on
+					 * bits in OMB0 */
+#define CMD_EnableIDICounters	0x28	/* Enable IDI counters based on bits in
+					 * OMB0 */
+#define CMD_ResetIDICounters	0x29	/* Reset IDI counters based on bits in
+					 * OMB0 to its reset values */
+#define CMD_OverflowIDICounters	0x2a	/* Enable IDI counters overflow
+					 * interrupts  based on bits in OMB0 */
+#define CMD_MatchIntIDICounters	0x2b	/* Enable IDI counters match value
+					 * interrupts  based on bits in OMB0 */
+#define CMD_EdgeIDICounters	0x2c	/* Set IDI up counters count edge (bit=0
+					 * - rising, =1 - falling) */
+#define CMD_GetIDICntCurValue	0x2f	/* Read IDI{OMB0} up counter current
+					 * value */
+#define CMD_SetIDI0CntResetValue 0x40	/* Set IDI0 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI1CntResetValue 0x41	/* Set IDI1 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI2CntResetValue 0x42	/* Set IDI2 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI3CntResetValue 0x43	/* Set IDI3 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI4CntResetValue 0x44	/* Set IDI4 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI5CntResetValue 0x45	/* Set IDI5 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI6CntResetValue 0x46	/* Set IDI6 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI7CntResetValue 0x47	/* Set IDI7 Counter Reset Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI0CntMatchValue 0x48	/* Set IDI0 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI1CntMatchValue 0x49	/* Set IDI1 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI2CntMatchValue 0x4a	/* Set IDI2 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI3CntMatchValue 0x4b	/* Set IDI3 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI4CntMatchValue 0x4c	/* Set IDI4 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI5CntMatchValue 0x4d	/* Set IDI5 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI6CntMatchValue 0x4e	/* Set IDI6 Counter Match Value
+					 * 256*OMB1+OMB0 */
+#define CMD_SetIDI7CntMatchValue 0x4f	/* Set IDI7 Counter Match Value
+					 * 256*OMB1+OMB0 */
 
 #define OMBCMD_RETRY	0x03	/* 3 times try request before error */
 
@@ -244,115 +278,115 @@ MODULE_DEVICE_TABLE(pci, pci_dio_pci_table);
 static const struct dio_boardtype boardtypes[] = {
 	{"pci1730", PCI_VENDOR_ID_ADVANTECH, 0x1730, PCIDIO_MAINREG,
 	 TYPE_PCI1730,
-	 {{16, PCI1730_DI, 2, 0}, {16, PCI1730_IDI, 2, 0}},
-	 {{16, PCI1730_DO, 2, 0}, {16, PCI1730_IDO, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {16, PCI1730_DI, 2, 0}, {16, PCI1730_IDI, 2, 0} },
+	 { {16, PCI1730_DO, 2, 0}, {16, PCI1730_IDO, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1733", PCI_VENDOR_ID_ADVANTECH, 0x1733, PCIDIO_MAINREG,
 	 TYPE_PCI1733,
-	 {{0, 0, 0, 0}, {32, PCI1733_IDI, 4, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {32, PCI1733_IDI, 4, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1734", PCI_VENDOR_ID_ADVANTECH, 0x1734, PCIDIO_MAINREG,
 	 TYPE_PCI1734,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {32, PCI1734_IDO, 4, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {32, PCI1734_IDO, 4, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI173x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1735", PCI_VENDOR_ID_ADVANTECH, 0x1735, PCIDIO_MAINREG,
 	 TYPE_PCI1735,
-	 {{32, PCI1735_DI, 4, 0}, {0, 0, 0, 0}},
-	 {{32, PCI1735_DO, 4, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {32, PCI1735_DI, 4, 0}, {0, 0, 0, 0} },
+	 { {32, PCI1735_DO, 4, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 { 4, PCI1735_BOARDID, 1, SDF_INTERNAL},
-	 {{3, PCI1735_C8254, 1, 0}},
+	 { {3, PCI1735_C8254, 1, 0} },
 	 IO_8b},
 	{"pci1736", PCI_VENDOR_ID_ADVANTECH, 0x1736, PCI1736_MAINREG,
 	 TYPE_PCI1736,
-	 {{0, 0, 0, 0}, {16, PCI1736_IDI, 2, 0}},
-	 {{0, 0, 0, 0}, {16, PCI1736_IDO, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {16, PCI1736_IDI, 2, 0} },
+	 { {0, 0, 0, 0}, {16, PCI1736_IDO, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI1736_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1750", PCI_VENDOR_ID_ADVANTECH, 0x1750, PCIDIO_MAINREG,
 	 TYPE_PCI1750,
-	 {{0, 0, 0, 0}, {16, PCI1750_IDI, 2, 0}},
-	 {{0, 0, 0, 0}, {16, PCI1750_IDO, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {16, PCI1750_IDI, 2, 0} },
+	 { {0, 0, 0, 0}, {16, PCI1750_IDO, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {0, 0, 0, 0},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1751", PCI_VENDOR_ID_ADVANTECH, 0x1751, PCIDIO_MAINREG,
 	 TYPE_PCI1751,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{48, PCI1751_DIO, 2, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {48, PCI1751_DIO, 2, 0}, {0, 0, 0, 0} },
 	 {0, 0, 0, 0},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1752", PCI_VENDOR_ID_ADVANTECH, 0x1752, PCIDIO_MAINREG,
 	 TYPE_PCI1752,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{32, PCI1752_IDO, 2, 0}, {32, PCI1752_IDO2, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {32, PCI1752_IDO, 2, 0}, {32, PCI1752_IDO2, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_16b},
 	{"pci1753", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{96, PCI1753_DIO, 4, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {96, PCI1753_DIO, 4, 0}, {0, 0, 0, 0} },
 	 {0, 0, 0, 0},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1753e", PCI_VENDOR_ID_ADVANTECH, 0x1753, PCIDIO_MAINREG,
 	 TYPE_PCI1753E,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{96, PCI1753_DIO, 4, 0}, {96, PCI1753E_DIO, 4, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {96, PCI1753_DIO, 4, 0}, {96, PCI1753E_DIO, 4, 0} },
 	 {0, 0, 0, 0},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1754", PCI_VENDOR_ID_ADVANTECH, 0x1754, PCIDIO_MAINREG,
 	 TYPE_PCI1754,
-	 {{32, PCI1754_IDI, 2, 0}, {32, PCI1754_IDI2, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {32, PCI1754_IDI, 2, 0}, {32, PCI1754_IDI2, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_16b},
 	{"pci1756", PCI_VENDOR_ID_ADVANTECH, 0x1756, PCIDIO_MAINREG,
 	 TYPE_PCI1756,
-	 {{0, 0, 0, 0}, {32, PCI1756_IDI, 2, 0}},
-	 {{0, 0, 0, 0}, {32, PCI1756_IDO, 2, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {32, PCI1756_IDI, 2, 0} },
+	 { {0, 0, 0, 0}, {32, PCI1756_IDO, 2, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI175x_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_16b},
 	{"pci1760", PCI_VENDOR_ID_ADVANTECH, 0x1760, 0,
 	 TYPE_PCI1760,
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},	/*  This card have own setup work */
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} }, /* This card have own setup work */
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {0, 0, 0, 0},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_8b},
 	{"pci1762", PCI_VENDOR_ID_ADVANTECH, 0x1762, PCIDIO_MAINREG,
 	 TYPE_PCI1762,
-	 {{0, 0, 0, 0}, {16, PCI1762_IDI, 1, 0}},
-	 {{0, 0, 0, 0}, {16, PCI1762_RO, 1, 0}},
-	 {{0, 0, 0, 0}, {0, 0, 0, 0}},
+	 { {0, 0, 0, 0}, {16, PCI1762_IDI, 1, 0} },
+	 { {0, 0, 0, 0}, {16, PCI1762_RO, 1, 0} },
+	 { {0, 0, 0, 0}, {0, 0, 0, 0} },
 	 {4, PCI1762_BOARDID, 1, SDF_INTERNAL},
-	 {{0, 0, 0, 0}},
+	 { {0, 0, 0, 0} },
 	 IO_16b}
 };
 
@@ -372,13 +406,16 @@ struct pci_dio_private {
 	char valid;		/*  card is usable */
 	char GlobalIrqEnabled;	/*  1= any IRQ source is enabled */
 	/*  PCI-1760 specific data */
-	unsigned char IDICntEnable;	/*  counter's counting enable status */
-	unsigned char IDICntOverEnable;	/*  counter's overflow interrupts enable status */
-	unsigned char IDICntMatchEnable;	/*  counter's match interrupts enable status */
-	unsigned char IDICntEdge;	/*  counter's count edge value (bit=0 - rising, =1 - falling) */
+	unsigned char IDICntEnable;	/* counter's counting enable status */
+	unsigned char IDICntOverEnable;	/* counter's overflow interrupts enable
+					 * status */
+	unsigned char IDICntMatchEnable;	/* counter's match interrupts
+						 * enable status */
+	unsigned char IDICntEdge;	/* counter's count edge value
+					 * (bit=0 - rising, =1 - falling) */
 	unsigned short CntResValue[8];	/*  counters' reset value */
-	unsigned short CntMatchValue[8];	/*  counters' match interrupt value */
-	unsigned char IDIFiltersEn;	/*  IDI's digital filters enable status */
+	unsigned short CntMatchValue[8]; /*  counters' match interrupt value */
+	unsigned char IDIFiltersEn; /*  IDI's digital filters enable status */
 	unsigned char IDIPatMatchEn;	/*  IDI's pattern match enable status */
 	unsigned char IDIPatMatchValue;	/*  IDI's pattern match value */
 	unsigned short IDIFiltrLow[8];	/*  IDI's filter value low signal */
@@ -691,7 +728,8 @@ static int pci1760_insn_cnt_write(struct comedi_device *dev,
 	};
 	unsigned char imb[4];
 
-	if (devpriv->CntResValue[chan] != (data[0] & 0xffff)) {	/*  Set reset value if different */
+	/* Set reset value if different */
+	if (devpriv->CntResValue[chan] != (data[0] & 0xffff)) {
 		ret = pci1760_mbxrequest(dev, omb, imb);
 		if (!ret)
 			return ret;
@@ -704,7 +742,8 @@ static int pci1760_insn_cnt_write(struct comedi_device *dev,
 	if (!ret)
 		return ret;
 
-	if (!(bitmask & devpriv->IDICntEnable)) {	/*  start counter if it don't run */
+	/*  start counter if it don't run */
+	if (!(bitmask & devpriv->IDICntEnable)) {
 		omb[0] = bitmask;
 		omb[2] = CMD_EnableIDICounters;
 		ret = pci1760_mbxrequest(dev, omb, imb);
@@ -740,12 +779,14 @@ static int pci1760_reset(struct comedi_device *dev)
 	devpriv->IDICntEnable = 0;
 
 	omb[0] = 0x00;
-	omb[2] = CMD_OverflowIDICounters;	/*  disable counters overflow interrupts */
+	omb[2] = CMD_OverflowIDICounters; /* disable counters overflow
+					   * interrupts */
 	pci1760_mbxrequest(dev, omb, imb);
 	devpriv->IDICntOverEnable = 0;
 
 	omb[0] = 0x00;
-	omb[2] = CMD_MatchIntIDICounters;	/*  disable counters match value interrupts */
+	omb[2] = CMD_MatchIntIDICounters; /* disable counters match value
+					   * interrupts */
 	pci1760_mbxrequest(dev, omb, imb);
 	devpriv->IDICntMatchEnable = 0;
 
@@ -766,7 +807,8 @@ static int pci1760_reset(struct comedi_device *dev)
 	}
 
 	omb[0] = 0xff;
-	omb[2] = CMD_ResetIDICounters;	/*  reset IDI up counters to reset values */
+	omb[2] = CMD_ResetIDICounters; /* reset IDI up counters to reset
+					* values */
 	pci1760_mbxrequest(dev, omb, imb);
 
 	omb[0] = 0x00;
@@ -807,9 +849,12 @@ static int pci_dio_reset(struct comedi_device *dev)
 		outb(0, dev->iobase + PCI1730_IDO + 1);
 		/* NO break there! */
 	case TYPE_PCI1733:
-		outb(0, dev->iobase + PCI1730_3_INT_EN);	/*  disable interrupts */
-		outb(0x0f, dev->iobase + PCI1730_3_INT_CLR);	/*  clear interrupts */
-		outb(0, dev->iobase + PCI1730_3_INT_RF);	/*  set rising edge trigger */
+		/* disable interrupts */
+		outb(0, dev->iobase + PCI1730_3_INT_EN);
+		/* clear interrupts */
+		outb(0x0f, dev->iobase + PCI1730_3_INT_CLR);
+		/* set rising edge trigger */
+		outb(0, dev->iobase + PCI1730_3_INT_RF);
 		break;
 	case TYPE_PCI1734:
 		outb(0, dev->iobase + PCI1734_IDO);	/*  clear outputs */
@@ -830,43 +875,53 @@ static int pci_dio_reset(struct comedi_device *dev)
 	case TYPE_PCI1736:
 		outb(0, dev->iobase + PCI1736_IDO);
 		outb(0, dev->iobase + PCI1736_IDO + 1);
-		outb(0, dev->iobase + PCI1736_3_INT_EN);	/*  disable interrupts */
-		outb(0x0f, dev->iobase + PCI1736_3_INT_CLR);	/*  clear interrupts */
-		outb(0, dev->iobase + PCI1736_3_INT_RF);	/*  set rising edge trigger */
+		/* disable interrupts */
+		outb(0, dev->iobase + PCI1736_3_INT_EN);
+		/* clear interrupts */
+		outb(0x0f, dev->iobase + PCI1736_3_INT_CLR);
+		/* set rising edge trigger */
+		outb(0, dev->iobase + PCI1736_3_INT_RF);
 		break;
 
 	case TYPE_PCI1750:
 	case TYPE_PCI1751:
-		outb(0x88, dev->iobase + PCI1750_ICR);	/*  disable & clear interrupts */
+		/* disable & clear interrupts */
+		outb(0x88, dev->iobase + PCI1750_ICR);
 		break;
 	case TYPE_PCI1752:
-		outw(0, dev->iobase + PCI1752_6_CFC);	/*  disable channel freeze function */
+		outw(0, dev->iobase + PCI1752_6_CFC); /* disable channel freeze
+						       * function */
 		outw(0, dev->iobase + PCI1752_IDO);	/*  clear outputs */
 		outw(0, dev->iobase + PCI1752_IDO + 2);
 		outw(0, dev->iobase + PCI1752_IDO2);
 		outw(0, dev->iobase + PCI1752_IDO2 + 2);
 		break;
 	case TYPE_PCI1753E:
-		outb(0x88, dev->iobase + PCI1753E_ICR0);	/*  disable & clear interrupts */
+		outb(0x88, dev->iobase + PCI1753E_ICR0); /* disable & clear
+							  * interrupts */
 		outb(0x80, dev->iobase + PCI1753E_ICR1);
 		outb(0x80, dev->iobase + PCI1753E_ICR2);
 		outb(0x80, dev->iobase + PCI1753E_ICR3);
 		/* NO break there! */
 	case TYPE_PCI1753:
-		outb(0x88, dev->iobase + PCI1753_ICR0);	/*  disable & clear interrupts */
+		outb(0x88, dev->iobase + PCI1753_ICR0); /* disable & clear
+							 * interrupts */
 		outb(0x80, dev->iobase + PCI1753_ICR1);
 		outb(0x80, dev->iobase + PCI1753_ICR2);
 		outb(0x80, dev->iobase + PCI1753_ICR3);
 		break;
 	case TYPE_PCI1754:
-		outw(0x08, dev->iobase + PCI1754_6_ICR0);	/*  disable and clear interrupts */
+		outw(0x08, dev->iobase + PCI1754_6_ICR0); /* disable and clear
+							   * interrupts */
 		outw(0x08, dev->iobase + PCI1754_6_ICR1);
 		outw(0x08, dev->iobase + PCI1754_ICR2);
 		outw(0x08, dev->iobase + PCI1754_ICR3);
 		break;
 	case TYPE_PCI1756:
-		outw(0, dev->iobase + PCI1752_6_CFC);	/*  disable channel freeze function */
-		outw(0x08, dev->iobase + PCI1754_6_ICR0);	/*  disable and clear interrupts */
+		outw(0, dev->iobase + PCI1752_6_CFC); /* disable channel freeze
+						       * function */
+		outw(0x08, dev->iobase + PCI1754_6_ICR0); /* disable and clear
+							   * interrupts */
 		outw(0x08, dev->iobase + PCI1754_6_ICR1);
 		outw(0, dev->iobase + PCI1756_IDO);	/*  clear outputs */
 		outw(0, dev->iobase + PCI1756_IDO + 2);
@@ -875,7 +930,8 @@ static int pci_dio_reset(struct comedi_device *dev)
 		pci1760_reset(dev);
 		break;
 	case TYPE_PCI1762:
-		outw(0x0101, dev->iobase + PCI1762_ICR);	/*  disable & clear interrupts */
+		outw(0x0101, dev->iobase + PCI1762_ICR); /* disable & clear
+							  * interrupts */
 		break;
 	}
 
@@ -996,7 +1052,7 @@ static int pci_dio_add_do(struct comedi_device *dev, struct comedi_subdevice *s,
 ==============================================================================
 */
 static int pci_dio_add_8254(struct comedi_device *dev,
-			    struct comedi_subdevice * s,
+			    struct comedi_subdevice *s,
 			    const struct diosubd_data *d, int subdev)
 {
 	s->type = COMEDI_SUBD_COUNTER;
@@ -1023,7 +1079,7 @@ static int CheckAndAllocCard(struct comedi_device *dev,
 
 	for (pr = pci_priv, prev = NULL; pr != NULL; prev = pr, pr = pr->next) {
 		if (pr->pcidev == pcidev)
-			return 0;	/*  this card is used, look for another */
+			return 0; /* this card is used, look for another */
 
 	}
 
@@ -1048,7 +1104,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 	struct comedi_subdevice *s;
 	int ret, subdev, n_subdevices, i, j;
 	unsigned long iobase;
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 
 	printk("comedi%d: adv_pci_dio: ", dev->minor);
 
@@ -1058,9 +1114,7 @@ static int pci_dio_attach(struct comedi_device *dev,
 		return -ENOMEM;
 	}
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  loop through cards supported by this driver */
 		for (i = 0; i < n_boardtypes; ++i) {
 			if (boardtypes[i].vendor_id != pcidev->vendor)
@@ -1215,15 +1269,12 @@ static int pci_dio_detach(struct comedi_device *dev)
 			}
 		}
 
-		if (this_board->boardid.chans) {
+		if (this_board->boardid.chans)
 			subdev++;
-		}
 
-		for (i = 0; i < MAX_8254_SUBDEVS; i++) {
-			if (this_board->s8254[i].chans) {
+		for (i = 0; i < MAX_8254_SUBDEVS; i++)
+			if (this_board->s8254[i].chans)
 				subdev++;
-			}
-		}
 
 		for (i = 0; i < dev->n_subdevices; i++) {
 			s = dev->subdevices + i;
@@ -1253,7 +1304,47 @@ static int pci_dio_detach(struct comedi_device *dev)
 /*
 ==============================================================================
 */
-COMEDI_PCI_INITCLEANUP(driver_pci_dio, pci_dio_pci_table);
+static int __devinit driver_pci_dio_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pci_dio.driver_name);
+}
+
+static void __devexit driver_pci_dio_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pci_dio_pci_driver = {
+	.id_table = pci_dio_pci_table,
+	.probe = &driver_pci_dio_pci_probe,
+	.remove = __devexit_p(&driver_pci_dio_pci_remove)
+};
+
+static int __init driver_pci_dio_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pci_dio);
+	if (retval < 0)
+		return retval;
+
+	driver_pci_dio_pci_driver.name = (char *)driver_pci_dio.driver_name;
+	return pci_register_driver(&driver_pci_dio_pci_driver);
+}
+
+static void __exit driver_pci_dio_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pci_dio_pci_driver);
+	comedi_driver_unregister(&driver_pci_dio);
+}
+
+module_init(driver_pci_dio_init_module);
+module_exit(driver_pci_dio_cleanup_module);
 /*
 ==============================================================================
 */
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/aio_aio12_8.c b/drivers/staging/comedi/drivers/aio_aio12_8.c
index 7a1c636df5b..1728cc013d1 100644
--- a/drivers/staging/comedi/drivers/aio_aio12_8.c
+++ b/drivers/staging/comedi/drivers/aio_aio12_8.c
@@ -227,4 +227,19 @@ static struct comedi_driver driver_aio_aio12_8 = {
 	.offset = sizeof(struct aio12_8_boardtype),
 };
 
-COMEDI_INITCLEANUP(driver_aio_aio12_8);
+static int __init driver_aio_aio12_8_init_module(void)
+{
+	return comedi_driver_register(&driver_aio_aio12_8);
+}
+
+static void __exit driver_aio_aio12_8_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_aio_aio12_8);
+}
+
+module_init(driver_aio_aio12_8_init_module);
+module_exit(driver_aio_aio12_8_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/aio_iiro_16.c b/drivers/staging/comedi/drivers/aio_iiro_16.c
index 4baef9ff932..487599531fe 100644
--- a/drivers/staging/comedi/drivers/aio_iiro_16.c
+++ b/drivers/staging/comedi/drivers/aio_iiro_16.c
@@ -184,4 +184,19 @@ static int aio_iiro_16_dio_insn_bits_read(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_INITCLEANUP(driver_aio_iiro_16);
+static int __init driver_aio_iiro_16_init_module(void)
+{
+	return comedi_driver_register(&driver_aio_iiro_16);
+}
+
+static void __exit driver_aio_iiro_16_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_aio_iiro_16);
+}
+
+module_init(driver_aio_iiro_16_init_module);
+module_exit(driver_aio_iiro_16_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/am9513.h b/drivers/staging/comedi/drivers/am9513.h
index 73367d6afff..0bb839e5149 100644
--- a/drivers/staging/comedi/drivers/am9513.h
+++ b/drivers/staging/comedi/drivers/am9513.h
@@ -47,32 +47,32 @@
 #ifdef Am9513_8BITBUS
 
 #define Am9513_write_register(reg, val)				\
-	do{							\
+	do {							\
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val>>8);			\
 		Am9513_output_data(val&0xff);			\
-	}while (0)
+	} while (0)
 
 #define Am9513_read_register(reg, val)				\
-	do{							\
+	do {							\
 		Am9513_output_control(reg);			\
-		val=Am9513_input_data()<<8;			\
-		val|=Am9513_input_data();			\
-	}while (0)
+		val = Am9513_input_data()<<8;			\
+		val |= Am9513_input_data();			\
+	} while (0)
 
 #else /* Am9513_16BITBUS */
 
 #define Am9513_write_register(reg, val)				\
-	do{							\
+	do {							\
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val);			\
-	}while (0)
+	} while (0)
 
 #define Am9513_read_register(reg, val)				\
-	do{							\
+	do {							\
 		Am9513_output_control(reg);			\
-		val=Am9513_input_data();			\
-	}while (0)
+		val = Am9513_input_data();			\
+	} while (0)
 
 #endif
 
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index bf27617aa62..93bbe4ec318 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -494,9 +494,58 @@ static struct comedi_driver driver_amplc_dio200 = {
 };
 
 #ifdef CONFIG_COMEDI_PCI
-COMEDI_PCI_INITCLEANUP(driver_amplc_dio200, dio200_pci_table);
+static int __devinit driver_amplc_dio200_pci_probe(struct pci_dev *dev,
+						   const struct pci_device_id
+						   *ent)
+{
+	return comedi_pci_auto_config(dev, driver_amplc_dio200.driver_name);
+}
+
+static void __devexit driver_amplc_dio200_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_amplc_dio200_pci_driver = {
+	.id_table = dio200_pci_table,
+	.probe = &driver_amplc_dio200_pci_probe,
+	.remove = __devexit_p(&driver_amplc_dio200_pci_remove)
+};
+
+static int __init driver_amplc_dio200_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_amplc_dio200);
+	if (retval < 0)
+		return retval;
+
+	driver_amplc_dio200_pci_driver.name =
+	    (char *)driver_amplc_dio200.driver_name;
+	return pci_register_driver(&driver_amplc_dio200_pci_driver);
+}
+
+static void __exit driver_amplc_dio200_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_amplc_dio200_pci_driver);
+	comedi_driver_unregister(&driver_amplc_dio200);
+}
+
+module_init(driver_amplc_dio200_init_module);
+module_exit(driver_amplc_dio200_cleanup_module);
 #else
-COMEDI_INITCLEANUP(driver_amplc_dio200);
+static int __init driver_amplc_dio200_init_module(void)
+{
+	return comedi_driver_register(&driver_amplc_dio200);
+}
+
+static void __exit driver_amplc_dio200_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_amplc_dio200);
+}
+
+module_init(driver_amplc_dio200_init_module);
+module_exit(driver_amplc_dio200_cleanup_module);
 #endif
 
 /*
@@ -1501,3 +1550,7 @@ static int dio200_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c
index a307d68d79c..48246cd50d4 100644
--- a/drivers/staging/comedi/drivers/amplc_pc236.c
+++ b/drivers/staging/comedi/drivers/amplc_pc236.c
@@ -182,9 +182,58 @@ static struct comedi_driver driver_amplc_pc236 = {
 };
 
 #ifdef CONFIG_COMEDI_PCI
-COMEDI_PCI_INITCLEANUP(driver_amplc_pc236, pc236_pci_table);
+static int __devinit driver_amplc_pc236_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_amplc_pc236.driver_name);
+}
+
+static void __devexit driver_amplc_pc236_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_amplc_pc236_pci_driver = {
+	.id_table = pc236_pci_table,
+	.probe = &driver_amplc_pc236_pci_probe,
+	.remove = __devexit_p(&driver_amplc_pc236_pci_remove)
+};
+
+static int __init driver_amplc_pc236_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_amplc_pc236);
+	if (retval < 0)
+		return retval;
+
+	driver_amplc_pc236_pci_driver.name =
+	    (char *)driver_amplc_pc236.driver_name;
+	return pci_register_driver(&driver_amplc_pc236_pci_driver);
+}
+
+static void __exit driver_amplc_pc236_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_amplc_pc236_pci_driver);
+	comedi_driver_unregister(&driver_amplc_pc236);
+}
+
+module_init(driver_amplc_pc236_init_module);
+module_exit(driver_amplc_pc236_cleanup_module);
 #else
-COMEDI_INITCLEANUP(driver_amplc_pc236);
+static int __init driver_amplc_pc236_init_module(void)
+{
+	return comedi_driver_register(&driver_amplc_pc236);
+}
+
+static void __exit driver_amplc_pc236_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_amplc_pc236);
+}
+
+module_init(driver_amplc_pc236_init_module);
+module_exit(driver_amplc_pc236_cleanup_module);
 #endif
 
 static int pc236_request_region(unsigned minor, unsigned long from,
@@ -664,3 +713,7 @@ static irqreturn_t pc236_interrupt(int irq, void *d)
 	}
 	return IRQ_RETVAL(handled);
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 15808e95cea..8a338807909 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -432,7 +432,60 @@ static int pc263_dio_insn_config(struct comedi_device *dev,
  * as necessary.
  */
 #ifdef CONFIG_COMEDI_PCI
-COMEDI_PCI_INITCLEANUP(driver_amplc_pc263, pc263_pci_table);
+static int __devinit driver_amplc_pc263_pci_probe(struct pci_dev *dev,
+						  const struct pci_device_id
+						  *ent)
+{
+	return comedi_pci_auto_config(dev, driver_amplc_pc263.driver_name);
+}
+
+static void __devexit driver_amplc_pc263_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_amplc_pc263_pci_driver = {
+	.id_table = pc263_pci_table,
+	.probe = &driver_amplc_pc263_pci_probe,
+	.remove = __devexit_p(&driver_amplc_pc263_pci_remove)
+};
+
+static int __init driver_amplc_pc263_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_amplc_pc263);
+	if (retval < 0)
+		return retval;
+
+	driver_amplc_pc263_pci_driver.name =
+	    (char *)driver_amplc_pc263.driver_name;
+	return pci_register_driver(&driver_amplc_pc263_pci_driver);
+}
+
+static void __exit driver_amplc_pc263_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_amplc_pc263_pci_driver);
+	comedi_driver_unregister(&driver_amplc_pc263);
+}
+
+module_init(driver_amplc_pc263_init_module);
+module_exit(driver_amplc_pc263_cleanup_module);
 #else
-COMEDI_INITCLEANUP(driver_amplc_pc263);
+static int __init driver_amplc_pc263_init_module(void)
+{
+	return comedi_driver_register(&driver_amplc_pc263);
+}
+
+static void __exit driver_amplc_pc263_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_amplc_pc263);
+}
+
+module_init(driver_amplc_pc263_init_module);
+module_exit(driver_amplc_pc263_cleanup_module);
 #endif
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index c486a878e18..1b5ba1c2725 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -443,7 +443,45 @@ static struct comedi_driver driver_amplc_pci224 = {
 	.num_names = ARRAY_SIZE(pci224_boards),
 };
 
-COMEDI_PCI_INITCLEANUP(driver_amplc_pci224, pci224_pci_table);
+static int __devinit driver_amplc_pci224_pci_probe(struct pci_dev *dev,
+						   const struct pci_device_id
+						   *ent)
+{
+	return comedi_pci_auto_config(dev, driver_amplc_pci224.driver_name);
+}
+
+static void __devexit driver_amplc_pci224_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_amplc_pci224_pci_driver = {
+	.id_table = pci224_pci_table,
+	.probe = &driver_amplc_pci224_pci_probe,
+	.remove = __devexit_p(&driver_amplc_pci224_pci_remove)
+};
+
+static int __init driver_amplc_pci224_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_amplc_pci224);
+	if (retval < 0)
+		return retval;
+
+	driver_amplc_pci224_pci_driver.name =
+	    (char *)driver_amplc_pci224.driver_name;
+	return pci_register_driver(&driver_amplc_pci224_pci_driver);
+}
+
+static void __exit driver_amplc_pci224_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_amplc_pci224_pci_driver);
+	comedi_driver_unregister(&driver_amplc_pci224);
+}
+
+module_init(driver_amplc_pci224_init_module);
+module_exit(driver_amplc_pci224_cleanup_module);
 
 /*
  * Called from the 'insn_write' function to perform a single write.
@@ -1557,3 +1595,7 @@ static int pci224_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c
index 7fffd967d47..5d064577b2f 100644
--- a/drivers/staging/comedi/drivers/amplc_pci230.c
+++ b/drivers/staging/comedi/drivers/amplc_pci230.c
@@ -617,7 +617,45 @@ static struct comedi_driver driver_amplc_pci230 = {
 	.num_names = ARRAY_SIZE(pci230_boards),
 };
 
-COMEDI_PCI_INITCLEANUP(driver_amplc_pci230, pci230_pci_table);
+static int __devinit driver_amplc_pci230_pci_probe(struct pci_dev *dev,
+						   const struct pci_device_id
+						   *ent)
+{
+	return comedi_pci_auto_config(dev, driver_amplc_pci230.driver_name);
+}
+
+static void __devexit driver_amplc_pci230_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_amplc_pci230_pci_driver = {
+	.id_table = pci230_pci_table,
+	.probe = &driver_amplc_pci230_pci_probe,
+	.remove = __devexit_p(&driver_amplc_pci230_pci_remove)
+};
+
+static int __init driver_amplc_pci230_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_amplc_pci230);
+	if (retval < 0)
+		return retval;
+
+	driver_amplc_pci230_pci_driver.name =
+	    (char *)driver_amplc_pci230.driver_name;
+	return pci_register_driver(&driver_amplc_pci230_pci_driver);
+}
+
+static void __exit driver_amplc_pci230_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_amplc_pci230_pci_driver);
+	comedi_driver_unregister(&driver_amplc_pci230);
+}
+
+module_init(driver_amplc_pci230_init_module);
+module_exit(driver_amplc_pci230_cleanup_module);
 
 static int pci230_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
@@ -726,7 +764,7 @@ static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	struct comedi_subdevice *s;
 	unsigned long iobase1, iobase2;
 	/* PCI230's I/O spaces 1 and 2 respectively. */
-	struct pci_dev *pci_dev;
+	struct pci_dev *pci_dev = NULL;
 	int i = 0, irq_hdl, rc;
 
 	printk("comedi%d: amplc_pci230: attach %s %d,%d\n", dev->minor,
@@ -742,9 +780,7 @@ static int pci230_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	spin_lock_init(&devpriv->ai_stop_spinlock);
 	spin_lock_init(&devpriv->ao_stop_spinlock);
 	/* Find card */
-	for (pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_dev != NULL;
-	     pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) {
+	for_each_pci_dev(pci_dev) {
 		if (it->options[0] || it->options[1]) {
 			/* Match against bus/slot options. */
 			if (it->options[0] != pci_dev->bus->number ||
@@ -3014,3 +3050,7 @@ static int pci230_ai_cancel(struct comedi_device *dev,
 	pci230_ai_stop(dev, s);
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/c6xdigio.c b/drivers/staging/comedi/drivers/c6xdigio.c
index fb0d5fa7176..e0ac825ea58 100644
--- a/drivers/staging/comedi/drivers/c6xdigio.c
+++ b/drivers/staging/comedi/drivers/c6xdigio.c
@@ -517,4 +517,19 @@ static int c6xdigio_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_INITCLEANUP(driver_c6xdigio);
+static int __init driver_c6xdigio_init_module(void)
+{
+	return comedi_driver_register(&driver_c6xdigio);
+}
+
+static void __exit driver_c6xdigio_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_c6xdigio);
+}
+
+module_init(driver_c6xdigio_init_module);
+module_exit(driver_c6xdigio_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index cfeb11f443e..f8ede1182cc 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -37,7 +37,6 @@ Status: experimental
 #include <linux/delay.h>
 #include <linux/pci.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -171,7 +170,7 @@ static int das16cs_attach(struct comedi_device *dev,
 	if (!link)
 		return -EIO;
 
-	dev->iobase = link->io.BasePort1;
+	dev->iobase = link->resource[0]->start;;
 	printk("I/O base=0x%04lx ", dev->iobase);
 
 	printk("fingerprint:\n");
@@ -662,14 +661,6 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *);
    less on other parts of the kernel.
 */
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static dev_info_t dev_info = "cb_das16_cs";
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
@@ -719,8 +710,7 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link)
 	((struct local_info_t *)link->priv)->stop = 1;
 	das16cs_pcmcia_release(link);
 	/* This points to the parent struct local_info_t struct */
-	if (link->priv)
-		kfree(link->priv);
+	kfree(link->priv);
 }				/* das16cs_pcmcia_detach */
 
 
@@ -737,24 +727,22 @@ static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		return pcmcia_request_io(p_dev, &p_dev->io);
+		return pcmcia_request_io(p_dev);
 	}
 
 	return 0;
@@ -788,12 +776,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %u", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
+	if (link->resource[0])
+		printk(", io %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(", io %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -847,7 +833,7 @@ struct pcmcia_driver das16cs_driver = {
 	.id_table = das16cs_id_table,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "cb_das16_cs",
 		},
 };
 
@@ -881,5 +867,16 @@ void __exit cleanup_module(void)
 }
 
 #else
-COMEDI_INITCLEANUP(driver_das16cs);
+static int __init driver_das16cs_init_module(void)
+{
+	return comedi_driver_register(&driver_das16cs);
+}
+
+static void __exit driver_das16cs_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das16cs);
+}
+
+module_init(driver_das16cs_init_module);
+module_exit(driver_das16cs_cleanup_module);
 #endif /* CONFIG_PCMCIA */
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 434591de37c..6530b6c9d98 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -533,7 +533,7 @@ static int cb_pcidas_attach(struct comedi_device *dev,
 			    struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	int index;
 	int i;
 
@@ -550,9 +550,7 @@ static int cb_pcidas_attach(struct comedi_device *dev,
  */
 	printk("\n");
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_CB)
 			continue;
@@ -1871,4 +1869,44 @@ static int nvram_read(struct comedi_device *dev, unsigned int address,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, cb_pcidas_pci_table);
+static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
+						const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
+}
+
+static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_cb_pcidas_pci_driver = {
+	.id_table = cb_pcidas_pci_table,
+	.probe = &driver_cb_pcidas_pci_probe,
+	.remove = __devexit_p(&driver_cb_pcidas_pci_remove)
+};
+
+static int __init driver_cb_pcidas_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_cb_pcidas);
+	if (retval < 0)
+		return retval;
+
+	driver_cb_pcidas_pci_driver.name = (char *)driver_cb_pcidas.driver_name;
+	return pci_register_driver(&driver_cb_pcidas_pci_driver);
+}
+
+static void __exit driver_cb_pcidas_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_cb_pcidas_pci_driver);
+	comedi_driver_unregister(&driver_cb_pcidas);
+}
+
+module_init(driver_cb_pcidas_init_module);
+module_exit(driver_cb_pcidas_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 79aa286e9bb..53e7015869f 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -1237,7 +1237,43 @@ static unsigned int get_ao_divisor(unsigned int ns, unsigned int flags);
 static void load_ao_dma(struct comedi_device *dev,
 			const struct comedi_cmd *cmd);
 
-COMEDI_PCI_INITCLEANUP(driver_cb_pcidas, pcidas64_pci_table);
+static int __devinit driver_cb_pcidas_pci_probe(struct pci_dev *dev,
+						const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_cb_pcidas.driver_name);
+}
+
+static void __devexit driver_cb_pcidas_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_cb_pcidas_pci_driver = {
+	.id_table = pcidas64_pci_table,
+	.probe = &driver_cb_pcidas_pci_probe,
+	.remove = __devexit_p(&driver_cb_pcidas_pci_remove)
+};
+
+static int __init driver_cb_pcidas_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_cb_pcidas);
+	if (retval < 0)
+		return retval;
+
+	driver_cb_pcidas_pci_driver.name = (char *)driver_cb_pcidas.driver_name;
+	return pci_register_driver(&driver_cb_pcidas_pci_driver);
+}
+
+static void __exit driver_cb_pcidas_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_cb_pcidas_pci_driver);
+	comedi_driver_unregister(&driver_cb_pcidas);
+}
+
+module_init(driver_cb_pcidas_init_module);
+module_exit(driver_cb_pcidas_cleanup_module);
 
 static unsigned int ai_range_bits_6xxx(const struct comedi_device *dev,
 				       unsigned int range_index)
@@ -1718,7 +1754,7 @@ static inline void warn_external_queue(struct comedi_device *dev)
  */
 static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	int index;
 	uint32_t local_range, local_decode;
 	int retval;
@@ -1735,9 +1771,7 @@ static int attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Probe the device to determine what device in the series it is.
  */
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
@@ -4303,3 +4337,7 @@ static void i2c_write(struct comedi_device *dev, unsigned int address,
 	}
 	i2c_stop(dev);
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcidda.c b/drivers/staging/comedi/drivers/cb_pcidda.c
index c374bee2506..2d35143b8e5 100644
--- a/drivers/staging/comedi/drivers/cb_pcidda.c
+++ b/drivers/staging/comedi/drivers/cb_pcidda.c
@@ -280,7 +280,7 @@ static int cb_pcidda_attach(struct comedi_device *dev,
 			    struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	int index;
 
 	printk("comedi%d: cb_pcidda: ", dev->minor);
@@ -296,9 +296,7 @@ static int cb_pcidda_attach(struct comedi_device *dev,
  */
 	printk("\n");
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_CB) {
 			if (it->options[0] || it->options[1]) {
 				if (pcidev->bus->number != it->options[0] ||
@@ -856,4 +854,44 @@ static void cb_pcidda_calibrate(struct comedi_device *dev, unsigned int channel,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(driver_cb_pcidda, cb_pcidda_pci_table);
+static int __devinit driver_cb_pcidda_pci_probe(struct pci_dev *dev,
+						const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_cb_pcidda.driver_name);
+}
+
+static void __devexit driver_cb_pcidda_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_cb_pcidda_pci_driver = {
+	.id_table = cb_pcidda_pci_table,
+	.probe = &driver_cb_pcidda_pci_probe,
+	.remove = __devexit_p(&driver_cb_pcidda_pci_remove)
+};
+
+static int __init driver_cb_pcidda_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_cb_pcidda);
+	if (retval < 0)
+		return retval;
+
+	driver_cb_pcidda_pci_driver.name = (char *)driver_cb_pcidda.driver_name;
+	return pci_register_driver(&driver_cb_pcidda_pci_driver);
+}
+
+static void __exit driver_cb_pcidda_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_cb_pcidda_pci_driver);
+	comedi_driver_unregister(&driver_cb_pcidda);
+}
+
+module_init(driver_cb_pcidda_init_module);
+module_exit(driver_cb_pcidda_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcidio.c b/drivers/staging/comedi/drivers/cb_pcidio.c
index 38ccd105fa3..c1693c91a6d 100644
--- a/drivers/staging/comedi/drivers/cb_pcidio.c
+++ b/drivers/staging/comedi/drivers/cb_pcidio.c
@@ -202,9 +202,7 @@ static int pcidio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Probe the device to determine what device in the series it is.
  */
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_CB)
 			continue;
@@ -300,4 +298,44 @@ static int pcidio_detach(struct comedi_device *dev)
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(driver_cb_pcidio, pcidio_pci_table);
+static int __devinit driver_cb_pcidio_pci_probe(struct pci_dev *dev,
+						const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_cb_pcidio.driver_name);
+}
+
+static void __devexit driver_cb_pcidio_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_cb_pcidio_pci_driver = {
+	.id_table = pcidio_pci_table,
+	.probe = &driver_cb_pcidio_pci_probe,
+	.remove = __devexit_p(&driver_cb_pcidio_pci_remove)
+};
+
+static int __init driver_cb_pcidio_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_cb_pcidio);
+	if (retval < 0)
+		return retval;
+
+	driver_cb_pcidio_pci_driver.name = (char *)driver_cb_pcidio.driver_name;
+	return pci_register_driver(&driver_cb_pcidio_pci_driver);
+}
+
+static void __exit driver_cb_pcidio_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_cb_pcidio_pci_driver);
+	comedi_driver_unregister(&driver_cb_pcidio);
+}
+
+module_init(driver_cb_pcidio_init_module);
+module_exit(driver_cb_pcidio_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
index 49dccbbd713..ced346a7cae 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdas.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
@@ -210,7 +210,7 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
 			     struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *s;
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	int index;
 	/* int i; */
 
@@ -227,9 +227,7 @@ static int cb_pcimdas_attach(struct comedi_device *dev,
  */
 	printk("\n");
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
@@ -491,4 +489,46 @@ static int cb_pcimdas_ao_rinsn(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(driver_cb_pcimdas, cb_pcimdas_pci_table);
+static int __devinit driver_cb_pcimdas_pci_probe(struct pci_dev *dev,
+						 const struct pci_device_id
+						 *ent)
+{
+	return comedi_pci_auto_config(dev, driver_cb_pcimdas.driver_name);
+}
+
+static void __devexit driver_cb_pcimdas_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_cb_pcimdas_pci_driver = {
+	.id_table = cb_pcimdas_pci_table,
+	.probe = &driver_cb_pcimdas_pci_probe,
+	.remove = __devexit_p(&driver_cb_pcimdas_pci_remove)
+};
+
+static int __init driver_cb_pcimdas_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_cb_pcimdas);
+	if (retval < 0)
+		return retval;
+
+	driver_cb_pcimdas_pci_driver.name =
+	    (char *)driver_cb_pcimdas.driver_name;
+	return pci_register_driver(&driver_cb_pcimdas_pci_driver);
+}
+
+static void __exit driver_cb_pcimdas_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_cb_pcimdas_pci_driver);
+	comedi_driver_unregister(&driver_cb_pcimdas);
+}
+
+module_init(driver_cb_pcimdas_init_module);
+module_exit(driver_cb_pcimdas_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index f404ec7723e..8c981a89ab6 100644
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -195,7 +195,45 @@ MODULE_DESCRIPTION("Comedi low-level driver for the Computerboards PCIM-DDA "
 		   "series.  Currently only supports PCIM-DDA06-16 (which "
 		   "also happens to be the only board in this series. :) ) ");
 MODULE_LICENSE("GPL");
-COMEDI_PCI_INITCLEANUP_NOMODULE(cb_pcimdda_driver, pci_table);
+static int __devinit cb_pcimdda_driver_pci_probe(struct pci_dev *dev,
+						 const struct pci_device_id
+						 *ent)
+{
+	return comedi_pci_auto_config(dev, cb_pcimdda_driver.driver_name);
+}
+
+static void __devexit cb_pcimdda_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver cb_pcimdda_driver_pci_driver = {
+	.id_table = pci_table,
+	.probe = &cb_pcimdda_driver_pci_probe,
+	.remove = __devexit_p(&cb_pcimdda_driver_pci_remove)
+};
+
+static int __init cb_pcimdda_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&cb_pcimdda_driver);
+	if (retval < 0)
+		return retval;
+
+	cb_pcimdda_driver_pci_driver.name =
+	    (char *)cb_pcimdda_driver.driver_name;
+	return pci_register_driver(&cb_pcimdda_driver_pci_driver);
+}
+
+static void __exit cb_pcimdda_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&cb_pcimdda_driver_pci_driver);
+	comedi_driver_unregister(&cb_pcimdda_driver);
+}
+
+module_init(cb_pcimdda_driver_init_module);
+module_exit(cb_pcimdda_driver_cleanup_module);
 
 static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		    struct comedi_insn *insn, unsigned int *data);
@@ -426,13 +464,11 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
  */
 static int probe(struct comedi_device *dev, const struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	int index;
 	unsigned long registers;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		/*  is it not a computer boards card? */
 		if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
 			continue;
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index 701622280ff..cfcbd9b8f39 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -50,43 +50,6 @@ Configuration Options:
   within each minor will be concatenated together in the order given here.
 */
 
-/*
- * The previous block comment is used to automatically generate
- * documentation in Comedi and Comedilib.  The fields:
- *
- * Driver: the name of the driver
- * Description: a short phrase describing the driver.  Don't list boards.
- * Devices: a full list of the boards that attempt to be supported by
- *   the driver.  Format is "(manufacturer) board name [comedi name]",
- *   where comedi_name is the name that is used to configure the board.
- *   See the comment near board_name: in the struct comedi_driver structure
- *   below.  If (manufacturer) or [comedi name] is missing, the previous
- *   value is used.
- * Author: you
- * Updated: date when the _documentation_ was last updated.  Use 'date -R'
- *   to get a value for this.
- * Status: a one-word description of the status.  Valid values are:
- *   works - driver works correctly on most boards supported, and
- *     passes comedi_test.
- *   unknown - unknown.  Usually put there by ds.
- *   experimental - may not work in any particular release.  Author
- *     probably wants assistance testing it.
- *   bitrotten - driver has not been update in a long time, probably
- *     doesn't work, and probably is missing support for significant
- *     Comedi interface features.
- *   untested - author probably wrote it "blind", and is believed to
- *     work, but no confirmation.
- *
- * These headers should be followed by a blank line, and any comments
- * you wish to say about the driver.  The comment area is the place
- * to put any known bugs, limitations, unsupported features, supported
- * command triggers, whether or not commands are supported on particular
- * subdevices, etc.
- *
- * Somewhere in the comment should be information about configuration
- * options that are used with comedi_config.
- */
-
 #include <linux/string.h>
 #include <linux/slab.h>
 #include "../comedi.h"
diff --git a/drivers/staging/comedi/drivers/comedi_parport.c b/drivers/staging/comedi/drivers/comedi_parport.c
index fcd7721c553..21d834dd92b 100644
--- a/drivers/staging/comedi/drivers/comedi_parport.c
+++ b/drivers/staging/comedi/drivers/comedi_parport.c
@@ -101,7 +101,18 @@ static struct comedi_driver driver_parport = {
 	.detach = parport_detach,
 };
 
-COMEDI_INITCLEANUP(driver_parport);
+static int __init driver_parport_init_module(void)
+{
+	return comedi_driver_register(&driver_parport);
+}
+
+static void __exit driver_parport_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_parport);
+}
+
+module_init(driver_parport_init_module);
+module_exit(driver_parport_cleanup_module);
 
 struct parport_private {
 	unsigned int a_data;
@@ -396,3 +407,7 @@ static int parport_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index ef83a1a445b..b220b305541 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -107,7 +107,18 @@ static struct comedi_driver driver_waveform = {
 	.num_names = ARRAY_SIZE(waveform_boards),
 };
 
-COMEDI_INITCLEANUP(driver_waveform);
+static int __init driver_waveform_init_module(void)
+{
+	return comedi_driver_register(&driver_waveform);
+}
+
+static void __exit driver_waveform_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_waveform);
+}
+
+module_init(driver_waveform_init_module);
+module_exit(driver_waveform_cleanup_module);
 
 static int waveform_ai_cmdtest(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
@@ -549,3 +560,7 @@ static int waveform_ao_insn_write(struct comedi_device *dev,
 
 	return insn->n;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/contec_pci_dio.c b/drivers/staging/comedi/drivers/contec_pci_dio.c
index 9511814e641..871f109bcfa 100644
--- a/drivers/staging/comedi/drivers/contec_pci_dio.c
+++ b/drivers/staging/comedi/drivers/contec_pci_dio.c
@@ -103,7 +103,7 @@ static int contec_ns_to_timer(unsigned int *ns, int round);
 
 static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct comedi_subdevice *s;
 
 	printk("comedi%d: contec: ", dev->minor);
@@ -116,10 +116,7 @@ static int contec_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	if (alloc_subdevices(dev, 2) < 0)
 		return -ENOMEM;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
-
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_CONTEC &&
 		    pcidev->device == PCI_DEVICE_ID_PIO1616L) {
 			if (it->options[0] || it->options[1]) {
@@ -232,4 +229,44 @@ static int contec_di_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_contec, contec_pci_table);
+static int __devinit driver_contec_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_contec.driver_name);
+}
+
+static void __devexit driver_contec_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_contec_pci_driver = {
+	.id_table = contec_pci_table,
+	.probe = &driver_contec_pci_probe,
+	.remove = __devexit_p(&driver_contec_pci_remove)
+};
+
+static int __init driver_contec_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_contec);
+	if (retval < 0)
+		return retval;
+
+	driver_contec_pci_driver.name = (char *)driver_contec.driver_name;
+	return pci_register_driver(&driver_contec_pci_driver);
+}
+
+static void __exit driver_contec_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_contec_pci_driver);
+	comedi_driver_unregister(&driver_contec);
+}
+
+module_init(driver_contec_init_module);
+module_exit(driver_contec_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
index 078ec273b27..6af6c8323d5 100644
--- a/drivers/staging/comedi/drivers/daqboard2000.c
+++ b/drivers/staging/comedi/drivers/daqboard2000.c
@@ -887,4 +887,46 @@ static int daqboard2000_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_daqboard2000, daqboard2000_pci_table);
+static int __devinit driver_daqboard2000_pci_probe(struct pci_dev *dev,
+						   const struct pci_device_id
+						   *ent)
+{
+	return comedi_pci_auto_config(dev, driver_daqboard2000.driver_name);
+}
+
+static void __devexit driver_daqboard2000_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_daqboard2000_pci_driver = {
+	.id_table = daqboard2000_pci_table,
+	.probe = &driver_daqboard2000_pci_probe,
+	.remove = __devexit_p(&driver_daqboard2000_pci_remove)
+};
+
+static int __init driver_daqboard2000_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_daqboard2000);
+	if (retval < 0)
+		return retval;
+
+	driver_daqboard2000_pci_driver.name =
+	    (char *)driver_daqboard2000.driver_name;
+	return pci_register_driver(&driver_daqboard2000_pci_driver);
+}
+
+static void __exit driver_daqboard2000_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_daqboard2000_pci_driver);
+	comedi_driver_unregister(&driver_daqboard2000);
+}
+
+module_init(driver_daqboard2000_init_module);
+module_exit(driver_daqboard2000_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 9cb144f7e70..3141dc80fe7 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -29,11 +29,11 @@
  * Description: DAS-08 compatible boards
  * Author: Warren Jasper, ds, Frank Hess
  * Devices: [Keithley Metrabyte] DAS08 (isa-das08),
- * [ComputerBoards] DAS08 (isa-das08), DAS08-PGM (das08-pgm),
- * DAS08-PGH (das08-pgh), DAS08-PGL (das08-pgl), DAS08-AOH (das08-aoh),
- * DAS08-AOL (das08-aol), DAS08-AOM (das08-aom), DAS08/JR-AO (das08/jr-ao),
- * DAS08/JR-16-AO (das08jr-16-ao), PCI-DAS08 (das08),
- * PC104-DAS08 (pc104-das08), DAS08/JR/16 (das08jr/16)
+ *   [ComputerBoards] DAS08 (isa-das08), DAS08-PGM (das08-pgm),
+ *   DAS08-PGH (das08-pgh), DAS08-PGL (das08-pgl), DAS08-AOH (das08-aoh),
+ *   DAS08-AOL (das08-aol), DAS08-AOM (das08-aom), DAS08/JR-AO (das08/jr-ao),
+ *   DAS08/JR-16-AO (das08jr-16-ao), PCI-DAS08 (das08),
+ *   PC104-DAS08 (pc104-das08), DAS08/JR/16 (das08jr/16)
  * Status: works
  *
  * This is a rewrite of the das08 and das08jr drivers.
@@ -980,7 +980,7 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	unsigned long iobase;
 #ifdef CONFIG_COMEDI_PCI
 	unsigned long pci_iobase = 0;
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = NULL;
 #endif
 
 	ret = alloc_private(dev, sizeof(struct das08_private_struct));
@@ -997,9 +997,7 @@ static int das08_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 		printk("\n");
 		/*  find card */
-		for (pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-		     pdev != NULL;
-		     pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) {
+		for_each_pci_dev(pdev) {
 			if (pdev->vendor == PCI_VENDOR_ID_COMPUTERBOARDS
 			    && pdev->device == PCI_DEVICE_ID_PCIDAS08) {
 				if (it->options[0] || it->options[1]) {
@@ -1082,11 +1080,62 @@ int das08_common_detach(struct comedi_device *dev)
 EXPORT_SYMBOL_GPL(das08_common_detach);
 
 #ifdef CONFIG_COMEDI_PCI
-COMEDI_PCI_INITCLEANUP(driver_das08, das08_pci_table);
+static int __devinit driver_das08_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_das08.driver_name);
+}
+
+static void __devexit driver_das08_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_das08_pci_driver = {
+	.id_table = das08_pci_table,
+	.probe = &driver_das08_pci_probe,
+	.remove = __devexit_p(&driver_das08_pci_remove)
+};
+
+static int __init driver_das08_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_das08);
+	if (retval < 0)
+		return retval;
+
+	driver_das08_pci_driver.name = (char *)driver_das08.driver_name;
+	return pci_register_driver(&driver_das08_pci_driver);
+}
+
+static void __exit driver_das08_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_das08_pci_driver);
+	comedi_driver_unregister(&driver_das08);
+}
+
+module_init(driver_das08_init_module);
+module_exit(driver_das08_cleanup_module);
 #else
-COMEDI_INITCLEANUP(driver_das08);
+static int __init driver_das08_init_module(void)
+{
+	return comedi_driver_register(&driver_das08);
+}
+
+static void __exit driver_das08_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das08);
+}
+
+module_init(driver_das08_init_module);
+module_exit(driver_das08_cleanup_module);
 #endif
 
 #ifdef CONFIG_COMEDI_PCMCIA
 EXPORT_SYMBOL_GPL(das08_cs_boards);
 #endif
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 8761a6d285d..c6aa52f8dce 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board.
 #include "das08.h"
 
 /* pcmcia includes */
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -89,7 +88,7 @@ static int das08_cs_attach(struct comedi_device *dev,
 			printk(" no pcmcia cards found\n");
 			return -EIO;
 		}
-		iobase = link->io.BasePort1;
+		iobase = link->resource[0]->start;
 	} else {
 		printk(" bug! board does not have PCMCIA bustype\n");
 		return -EINVAL;
@@ -132,14 +131,6 @@ static void das08_pcmcia_detach(struct pcmcia_device *);
    less on other parts of the kernel.
 */
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static const dev_info_t dev_info = "pcm-das08";
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
@@ -206,8 +197,7 @@ static void das08_pcmcia_detach(struct pcmcia_device *link)
 	das08_pcmcia_release(link);
 
 	/* This points to the parent struct local_info_t struct */
-	if (link->priv)
-		kfree(link->priv);
+	kfree(link->priv);
 
 }				/* das08_pcmcia_detach */
 
@@ -225,24 +215,23 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
 		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		return pcmcia_request_io(p_dev, &p_dev->io);
+		return pcmcia_request_io(p_dev);
 	}
 	return 0;
 }
@@ -284,12 +273,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %u", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
+	if (link->resource[0])
+		printk(", io %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -363,7 +350,7 @@ struct pcmcia_driver das08_cs_driver = {
 	.id_table = das08_cs_id_table,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "pcm-das08",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index ccee4f1802d..0af1b465908 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -1717,7 +1717,18 @@ static int das16_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_INITCLEANUP(driver_das16);
+static int __init driver_das16_init_module(void)
+{
+	return comedi_driver_register(&driver_das16);
+}
+
+static void __exit driver_das16_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das16);
+}
+
+module_init(driver_das16_init_module);
+module_exit(driver_das16_cleanup_module);
 
 /* utility function that suggests a dma transfer size in bytes */
 static unsigned int das16_suggest_transfer_size(struct comedi_device *dev,
@@ -1776,3 +1787,7 @@ static void das16_ai_munge(struct comedi_device *dev,
 
 	}
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das16m1.c b/drivers/staging/comedi/drivers/das16m1.c
index c403d882743..a5ce3b2abe4 100644
--- a/drivers/staging/comedi/drivers/das16m1.c
+++ b/drivers/staging/comedi/drivers/das16m1.c
@@ -198,7 +198,18 @@ struct das16m1_private_struct {
 #define devpriv ((struct das16m1_private_struct *)(dev->private))
 #define thisboard ((const struct das16m1_board *)(dev->board_ptr))
 
-COMEDI_INITCLEANUP(driver_das16m1);
+static int __init driver_das16m1_init_module(void)
+{
+	return comedi_driver_register(&driver_das16m1);
+}
+
+static void __exit driver_das16m1_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das16m1);
+}
+
+module_init(driver_das16m1_init_module);
+module_exit(driver_das16m1_cleanup_module);
 
 static inline short munge_sample(short data)
 {
@@ -777,3 +788,7 @@ static int das16m1_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index de5e82fec87..6ea93f9c0b4 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -531,7 +531,18 @@ static struct comedi_driver driver_das1800 = {
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_das1800);
+static int __init driver_das1800_init_module(void)
+{
+	return comedi_driver_register(&driver_das1800);
+}
+
+static void __exit driver_das1800_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das1800);
+}
+
+module_init(driver_das1800_init_module);
+module_exit(driver_das1800_cleanup_module);
 
 static int das1800_init_dma(struct comedi_device *dev, unsigned int dma0,
 			    unsigned int dma1)
@@ -1800,3 +1811,7 @@ static unsigned int suggest_transfer_size(struct comedi_cmd *cmd)
 
 	return size;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das6402.c b/drivers/staging/comedi/drivers/das6402.c
index a404a183191..6328f5280b6 100644
--- a/drivers/staging/comedi/drivers/das6402.c
+++ b/drivers/staging/comedi/drivers/das6402.c
@@ -109,7 +109,18 @@ static struct comedi_driver driver_das6402 = {
 	.detach = das6402_detach,
 };
 
-COMEDI_INITCLEANUP(driver_das6402);
+static int __init driver_das6402_init_module(void)
+{
+	return comedi_driver_register(&driver_das6402);
+}
+
+static void __exit driver_das6402_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das6402);
+}
+
+module_init(driver_das6402_init_module);
+module_exit(driver_das6402_cleanup_module);
 
 struct das6402_private {
 	int ai_bytes_to_read;
@@ -360,3 +371,7 @@ static int das6402_attach(struct comedi_device *dev,
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index aadc4971c90..aecaedc5027 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -347,7 +347,18 @@ static int das800_probe(struct comedi_device *dev)
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_das800);
+static int __init driver_das800_init_module(void)
+{
+	return comedi_driver_register(&driver_das800);
+}
+
+static void __exit driver_das800_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_das800);
+}
+
+module_init(driver_das800_init_module);
+module_exit(driver_das800_cleanup_module);
 
 /* interrupt service routine */
 static irqreturn_t das800_interrupt(int irq, void *d)
@@ -905,3 +916,7 @@ static int das800_set_frequency(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index d5cbd515c37..693728e14bd 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -37,43 +37,6 @@ Configuration Options:
   comedi_config /dev/comedi0 dmm32at baseaddr,irq
 */
 
-/*
- * The previous block comment is used to automatically generate
- * documentation in Comedi and Comedilib.  The fields:
- *
- * Driver: the name of the driver
- * Description: a short phrase describing the driver.  Don't list boards.
- * Devices: a full list of the boards that attempt to be supported by
- *   the driver.  Format is "(manufacturer) board name [comedi name]",
- *   where comedi_name is the name that is used to configure the board.
- *   See the comment near board_name: in the struct comedi_driver structure
- *   below.  If (manufacturer) or [comedi name] is missing, the previous
- *   value is used.
- * Author: you
- * Updated: date when the _documentation_ was last updated.  Use 'date -R'
- *   to get a value for this.
- * Status: a one-word description of the status.  Valid values are:
- *   works - driver works correctly on most boards supported, and
- *     passes comedi_test.
- *   unknown - unknown.  Usually put there by ds.
- *   experimental - may not work in any particular release.  Author
- *     probably wants assistance testing it.
- *   bitrotten - driver has not been update in a long time, probably
- *     doesn't work, and probably is missing support for significant
- *     Comedi interface features.
- *   untested - author probably wrote it "blind", and is believed to
- *     work, but no confirmation.
- *
- * These headers should be followed by a blank line, and any comments
- * you wish to say about the driver.  The comment area is the place
- * to put any known bugs, limitations, unsupported features, supported
- * command triggers, whether or not commands are supported on particular
- * subdevices, etc.
- *
- * Somewhere in the comment should be information about configuration
- * options that are used with comedi_config.
- */
-
 #include <linux/interrupt.h>
 #include "../comedidev.h"
 #include <linux/ioport.h>
@@ -336,12 +299,14 @@ static int dmm32at_attach(struct comedi_device *dev,
 	iobase = it->options[0];
 	irq = it->options[1];
 
-	printk("comedi%d: dmm32at: attaching\n", dev->minor);
-	printk("dmm32at: probing at address 0x%04lx, irq %u\n", iobase, irq);
+	printk(KERN_INFO "comedi%d: dmm32at: attaching\n", dev->minor);
+	printk(KERN_DEBUG "dmm32at: probing at address 0x%04lx, irq %u\n",
+	       iobase, irq);
 
 	/* register address space */
 	if (!request_region(iobase, DMM32AT_MEMSIZE, thisboard->name)) {
-		printk("I/O port conflict\n");
+		printk(KERN_ERR "comedi%d: dmm32at: I/O port conflict\n",
+		       dev->minor);
 		return -EIO;
 	}
 	dev->iobase = iobase;
@@ -379,14 +344,15 @@ static int dmm32at_attach(struct comedi_device *dev,
 	intstat = dmm_inb(dev, DMM32AT_INTCLOCK);
 	airback = dmm_inb(dev, DMM32AT_AIRBACK);
 
-	printk("dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n",
+	printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n",
 	       ailo, aihi, fifostat);
-	printk("dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n",
+	printk(KERN_DEBUG
+	       "dmm32at: aistat=0x%02x intstat=0x%02x airback=0x%02x\n",
 	       aistat, intstat, airback);
 
 	if ((ailo != 0x00) || (aihi != 0x1f) || (fifostat != 0x80) ||
 	    (aistat != 0x60 || (intstat != 0x00) || airback != 0x0c)) {
-		printk("dmmat32: board detection failed\n");
+		printk(KERN_ERR "dmmat32: board detection failed\n");
 		return -EIO;
 	}
 
@@ -394,7 +360,7 @@ static int dmm32at_attach(struct comedi_device *dev,
 	if (irq) {
 		ret = request_irq(irq, dmm32at_isr, 0, thisboard->name, dev);
 		if (ret < 0) {
-			printk("irq conflict\n");
+			printk(KERN_ERR "dmm32at: irq conflict\n");
 			return ret;
 		}
 		dev->irq = irq;
@@ -478,7 +444,7 @@ static int dmm32at_attach(struct comedi_device *dev,
 	}
 
 	/* success */
-	printk("comedi%d: dmm32at: attached\n", dev->minor);
+	printk(KERN_INFO "comedi%d: dmm32at: attached\n", dev->minor);
 
 	return 1;
 
@@ -494,7 +460,7 @@ static int dmm32at_attach(struct comedi_device *dev,
  */
 static int dmm32at_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: dmm32at: remove\n", dev->minor);
+	printk(KERN_INFO "comedi%d: dmm32at: remove\n", dev->minor);
 	if (dev->irq)
 		free_irq(dev->irq, dev);
 	if (dev->iobase)
@@ -542,7 +508,7 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev,
 			break;
 	}
 	if (i == 40000) {
-		printk("timeout\n");
+		printk(KERN_WARNING "dmm32at: timeout\n");
 		return -ETIMEDOUT;
 	}
 
@@ -557,7 +523,7 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev,
 				break;
 		}
 		if (i == 40000) {
-			printk("timeout\n");
+			printk(KERN_WARNING "dmm32at: timeout\n");
 			return -ETIMEDOUT;
 		}
 
@@ -627,7 +593,8 @@ static int dmm32at_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/* step 2: make sure trigger sources are unique and mutually
+	 * compatible */
 
 	/* note that mutual compatibility is not an issue here */
 	if (cmd->scan_begin_src != TRIG_TIMER &&
@@ -800,7 +767,8 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	if (cmd->stop_src == TRIG_COUNT)
 		devpriv->ai_scans_left = cmd->stop_arg;
 	else {			/* TRIG_NONE */
-		devpriv->ai_scans_left = 0xffffffff;	/* indicates TRIG_NONE to isr */
+		devpriv->ai_scans_left = 0xffffffff; /* indicates TRIG_NONE to
+						      * isr */
 	}
 
 	/* wait for circuit to settle */
@@ -810,7 +778,7 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			break;
 	}
 	if (i == 40000) {
-		printk("timeout\n");
+		printk(KERN_WARNING "dmm32at: timeout\n");
 		return -ETIMEDOUT;
 	}
 
@@ -823,13 +791,13 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		dmm_outb(dev, DMM32AT_CONV, 0xff);
 	}
 
-/* 	printk("dmmat32 in command\n"); */
+/*	printk("dmmat32 in command\n"); */
 
-/* 	for(i=0;i<cmd->chanlist_len;i++) */
-/* 		comedi_buf_put(s->async,i*100); */
+/*	for(i=0;i<cmd->chanlist_len;i++) */
+/*		comedi_buf_put(s->async,i*100); */
 
-/* 	s->async->events |= COMEDI_CB_EOA; */
-/* 	comedi_event(dev, s); */
+/*	s->async->events |= COMEDI_CB_EOA; */
+/*	comedi_event(dev, s); */
 
 	return 0;
 
@@ -937,7 +905,7 @@ static int dmm32at_ao_winsn(struct comedi_device *dev,
 				break;
 		}
 		if (i == 40000) {
-			printk("timeout\n");
+			printk(KERN_WARNING "dmm32at: timeout\n");
 			return -ETIMEDOUT;
 		}
 		/* dummy read to update trigger the output */
@@ -1095,4 +1063,19 @@ void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec)
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_dmm32at);
+static int __init driver_dmm32at_init_module(void)
+{
+	return comedi_driver_register(&driver_dmm32at);
+}
+
+static void __exit driver_dmm32at_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dmm32at);
+}
+
+module_init(driver_dmm32at_init_module);
+module_exit(driver_dmm32at_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2801.c b/drivers/staging/comedi/drivers/dt2801.c
index 83fb6e56c3e..5cce1b5f448 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -98,7 +98,18 @@ static struct comedi_driver driver_dt2801 = {
 	.detach = dt2801_detach,
 };
 
-COMEDI_INITCLEANUP(driver_dt2801);
+static int __init driver_dt2801_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2801);
+}
+
+static void __exit driver_dt2801_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2801);
+}
+
+module_init(driver_dt2801_init_module);
+module_exit(driver_dt2801_cleanup_module);
 
 #if 0
 /* ignore 'defined but not used' warning */
@@ -720,3 +731,7 @@ static int dt2801_dio_insn_config(struct comedi_device *dev,
 
 	return 1;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index ea9bfb7fd88..a1664caa1d9 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -239,7 +239,18 @@ static struct comedi_driver driver_dt2811 = {
 	.offset = sizeof(struct dt2811_board),
 };
 
-COMEDI_INITCLEANUP(driver_dt2811);
+static int __init driver_dt2811_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2811);
+}
+
+static void __exit driver_dt2811_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2811);
+}
+
+module_init(driver_dt2811_init_module);
+module_exit(driver_dt2811_cleanup_module);
 
 static int dt2811_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data);
@@ -625,3 +636,7 @@ static int dt2811_do_insn_bits(struct comedi_device *dev,
 
 	return 2;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c
index 16fde066d26..1c6248cf592 100644
--- a/drivers/staging/comedi/drivers/dt2814.c
+++ b/drivers/staging/comedi/drivers/dt2814.c
@@ -70,7 +70,18 @@ static struct comedi_driver driver_dt2814 = {
 	.detach = dt2814_detach,
 };
 
-COMEDI_INITCLEANUP(driver_dt2814);
+static int __init driver_dt2814_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2814);
+}
+
+static void __exit driver_dt2814_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2814);
+}
+
+module_init(driver_dt2814_init_module);
+module_exit(driver_dt2814_cleanup_module);
 
 static irqreturn_t dt2814_interrupt(int irq, void *dev);
 
@@ -387,3 +398,7 @@ static irqreturn_t dt2814_interrupt(int irq, void *d)
 	comedi_event(dev, s);
 	return IRQ_HANDLED;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2815.c b/drivers/staging/comedi/drivers/dt2815.c
index d1a4f782243..4155da43fd5 100644
--- a/drivers/staging/comedi/drivers/dt2815.c
+++ b/drivers/staging/comedi/drivers/dt2815.c
@@ -82,7 +82,18 @@ static struct comedi_driver driver_dt2815 = {
 	.detach = dt2815_detach,
 };
 
-COMEDI_INITCLEANUP(driver_dt2815);
+static int __init driver_dt2815_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2815);
+}
+
+static void __exit driver_dt2815_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2815);
+}
+
+module_init(driver_dt2815_init_module);
+module_exit(driver_dt2815_cleanup_module);
 
 static void dt2815_free_resources(struct comedi_device *dev);
 
@@ -255,3 +266,7 @@ static int dt2815_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt2817.c b/drivers/staging/comedi/drivers/dt2817.c
index 54e0dea0fc5..651fe050d02 100644
--- a/drivers/staging/comedi/drivers/dt2817.c
+++ b/drivers/staging/comedi/drivers/dt2817.c
@@ -57,7 +57,18 @@ static struct comedi_driver driver_dt2817 = {
 	.detach = dt2817_detach,
 };
 
-COMEDI_INITCLEANUP(driver_dt2817);
+static int __init driver_dt2817_init_module(void)
+{
+	return comedi_driver_register(&driver_dt2817);
+}
+
+static void __exit driver_dt2817_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt2817);
+}
+
+module_init(driver_dt2817_init_module);
+module_exit(driver_dt2817_cleanup_module);
 
 static int dt2817_dio_insn_config(struct comedi_device *dev,
 				  struct comedi_subdevice *s,
@@ -180,3 +191,7 @@ static int dt2817_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index fd8728c8366..8cea9dca3d7 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -423,7 +423,18 @@ static struct comedi_driver driver_dt282x = {
 	.offset = sizeof(struct dt282x_board),
 };
 
-COMEDI_INITCLEANUP(driver_dt282x);
+static int __init driver_dt282x_init_module(void)
+{
+	return comedi_driver_register(&driver_dt282x);
+}
+
+static void __exit driver_dt282x_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dt282x);
+}
+
+module_init(driver_dt282x_init_module);
+module_exit(driver_dt282x_cleanup_module);
 
 static void free_resources(struct comedi_device *dev);
 static int prep_ai_dma(struct comedi_device *dev, int chan, int size);
@@ -1502,3 +1513,7 @@ static int dt282x_grab_dma(struct comedi_device *dev, int dma1, int dma2)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt3000.c b/drivers/staging/comedi/drivers/dt3000.c
index ca687890fc1..656e7bbf2fc 100644
--- a/drivers/staging/comedi/drivers/dt3000.c
+++ b/drivers/staging/comedi/drivers/dt3000.c
@@ -287,7 +287,43 @@ static struct comedi_driver driver_dt3000 = {
 	.detach = dt3000_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_dt3000, dt3k_pci_table);
+static int __devinit driver_dt3000_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_dt3000.driver_name);
+}
+
+static void __devexit driver_dt3000_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_dt3000_pci_driver = {
+	.id_table = dt3k_pci_table,
+	.probe = &driver_dt3000_pci_probe,
+	.remove = __devexit_p(&driver_dt3000_pci_remove)
+};
+
+static int __init driver_dt3000_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_dt3000);
+	if (retval < 0)
+		return retval;
+
+	driver_dt3000_pci_driver.name = (char *)driver_dt3000.driver_name;
+	return pci_register_driver(&driver_dt3000_pci_driver);
+}
+
+static void __exit driver_dt3000_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_dt3000_pci_driver);
+	comedi_driver_unregister(&driver_dt3000);
+}
+
+module_init(driver_dt3000_init_module);
+module_exit(driver_dt3000_cleanup_module);
 
 static void dt3k_ai_empty_fifo(struct comedi_device *dev,
 			       struct comedi_subdevice *s);
@@ -991,3 +1027,7 @@ static struct pci_dev *dt_pci_find_device(struct pci_dev *from, int *board)
 	*board = -1;
 	return from;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 96caae36279..d01d2dc7911 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -890,8 +890,10 @@ static struct usb_driver dt9812_usb_driver = {
  * Comedi functions
  */
 
-static void dt9812_comedi_open(struct comedi_device *dev)
+static int dt9812_comedi_open(struct comedi_device *dev)
 {
+	int result = -ENODEV;
+
 	down(&devpriv->slot->mutex);
 	if (devpriv->slot->usb) {
 		/* We have an attached device, fill in current range info */
@@ -934,8 +936,10 @@ static void dt9812_comedi_open(struct comedi_device *dev)
 			}
 			break;
 		}
+		result = 0;
 	}
 	up(&devpriv->slot->mutex);
+	return result;
 }
 
 static int dt9812_di_rinsn(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/fl512.c b/drivers/staging/comedi/drivers/fl512.c
index a10a2b070a2..7f49add60b2 100644
--- a/drivers/staging/comedi/drivers/fl512.c
+++ b/drivers/staging/comedi/drivers/fl512.c
@@ -52,7 +52,18 @@ static struct comedi_driver driver_fl512 = {
 	.detach = fl512_detach,
 };
 
-COMEDI_INITCLEANUP(driver_fl512);
+static int __init driver_fl512_init_module(void)
+{
+	return comedi_driver_register(&driver_fl512);
+}
+
+static void __exit driver_fl512_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_fl512);
+}
+
+module_init(driver_fl512_init_module);
+module_exit(driver_fl512_cleanup_module);
 
 static int fl512_ai_insn(struct comedi_device *dev,
 			 struct comedi_subdevice *s, struct comedi_insn *insn,
@@ -205,3 +216,7 @@ static int fl512_detach(struct comedi_device *dev)
 	printk(KERN_INFO "comedi%d: fl512: dummy i detach\n", dev->minor);
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 51f12bf45cf..1661b57ca2a 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -311,17 +311,25 @@ struct hpdi_private {
 	void *plx9080_iobase;
 	void *hpdi_iobase;
 	uint32_t *dio_buffer[NUM_DMA_BUFFERS];	/*  dma buffers */
-	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];	/*  physical addresses of dma buffers */
-	struct plx_dma_desc *dma_desc;	/*  array of dma descriptors read by plx9080, allocated to get proper alignment */
-	dma_addr_t dma_desc_phys_addr;	/*  physical address of dma descriptor array */
+	/* physical addresses of dma buffers */
+	dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS];
+	/* array of dma descriptors read by plx9080, allocated to get proper
+	 * alignment */
+	struct plx_dma_desc *dma_desc;
+	/* physical address of dma descriptor array */
+	dma_addr_t dma_desc_phys_addr;
 	unsigned int num_dma_descriptors;
-	uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];	/*  pointer to start of buffers indexed by descriptor */
-	volatile unsigned int dma_desc_index;	/*  index of the dma descriptor that is currently being used */
+	/* pointer to start of buffers indexed by descriptor */
+	uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS];
+	/* index of the dma descriptor that is currently being used */
+	volatile unsigned int dma_desc_index;
 	unsigned int tx_fifo_size;
 	unsigned int rx_fifo_size;
 	volatile unsigned long dio_count;
-	volatile uint32_t bits[24];	/*  software copies of values written to hpdi registers */
-	volatile unsigned int block_size;	/*  number of bytes at which to generate COMEDI_CB_BLOCK events */
+	/* software copies of values written to hpdi registers */
+	volatile uint32_t bits[24];
+	/* number of bytes at which to generate COMEDI_CB_BLOCK events */
+	volatile unsigned int block_size;
 	unsigned dio_config_output:1;
 };
 
@@ -337,7 +345,43 @@ static struct comedi_driver driver_hpdi = {
 	.detach = hpdi_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_hpdi, hpdi_pci_table);
+static int __devinit driver_hpdi_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_hpdi.driver_name);
+}
+
+static void __devexit driver_hpdi_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_hpdi_pci_driver = {
+	.id_table = hpdi_pci_table,
+	.probe = &driver_hpdi_pci_probe,
+	.remove = __devexit_p(&driver_hpdi_pci_remove)
+};
+
+static int __init driver_hpdi_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_hpdi);
+	if (retval < 0)
+		return retval;
+
+	driver_hpdi_pci_driver.name = (char *)driver_hpdi.driver_name;
+	return pci_register_driver(&driver_hpdi_pci_driver);
+}
+
+static void __exit driver_hpdi_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_hpdi_pci_driver);
+	comedi_driver_unregister(&driver_hpdi);
+}
+
+module_init(driver_hpdi_init_module);
+module_exit(driver_hpdi_cleanup_module);
 
 static int dio_config_insn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
@@ -570,7 +614,8 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return -ENOMEM;
 
 	pcidev = NULL;
-	for (i = 0; i < ARRAY_SIZE(hpdi_boards) && dev->board_ptr == NULL; i++) {
+	for (i = 0; i < ARRAY_SIZE(hpdi_boards) &&
+		    dev->board_ptr == NULL; i++) {
 		do {
 			pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
 						hpdi_boards[i].device_id,
@@ -618,7 +663,7 @@ static int hpdi_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/*  remap, won't work with 2.0 kernels but who cares */
 	priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
 					    pci_resource_len(pcidev,
-							     PLX9080_BADDRINDEX));
+					    PLX9080_BADDRINDEX));
 	priv(dev)->hpdi_iobase =
 	    ioremap(priv(dev)->hpdi_phys_iobase,
 		    pci_resource_len(pcidev, HPDI_BADDRINDEX));
@@ -769,7 +814,8 @@ static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/* step 2: make sure trigger sources are unique and mutually
+	 * compatible */
 
 	/*  uniqueness check */
 	if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
@@ -1066,3 +1112,7 @@ static int hpdi_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index fa0e48173bd..809d17efd5b 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -185,7 +185,18 @@ board_name : &boardtypes[0].name,
 offset : sizeof(struct boardtype),
 };
 
-COMEDI_INITCLEANUP(driver_icp_multi);
+static int __init driver_icp_multi_init_module(void)
+{
+	return comedi_driver_register(&driver_icp_multi);
+}
+
+static void __exit driver_icp_multi_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_icp_multi);
+}
+
+module_init(driver_icp_multi_init_module);
+module_exit(driver_icp_multi_cleanup_module);
 
 struct icp_multi_private {
 	struct pcilst_struct *card;	/*  pointer to card */
@@ -1125,3 +1136,7 @@ static int icp_multi_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/icp_multi.h b/drivers/staging/comedi/drivers/icp_multi.h
index 2bb96b1d21e..68acefe1688 100644
--- a/drivers/staging/comedi/drivers/icp_multi.h
+++ b/drivers/staging/comedi/drivers/icp_multi.h
@@ -62,16 +62,14 @@ static int pci_card_data(struct pcilst_struct *amcc,
 /* build list of Inova cards in this system */
 static void pci_card_list_init(unsigned short pci_vendor, char display)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct pcilst_struct *inova, *last;
 	int i;
 
 	inova_devices = NULL;
 	last = NULL;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == pci_vendor) {
 			inova = kzalloc(sizeof(*inova), GFP_KERNEL);
 			if (!inova) {
diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index e26c1b88ebe..39a6a850d63 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -640,4 +640,19 @@ static unsigned int pci20xxx_di(struct comedi_device *dev,
 }
 #endif
 
-COMEDI_INITCLEANUP(driver_pci20xxx);
+static int __init driver_pci20xxx_init_module(void)
+{
+	return comedi_driver_register(&driver_pci20xxx);
+}
+
+static void __exit driver_pci20xxx_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pci20xxx);
+}
+
+module_init(driver_pci20xxx_init_module);
+module_exit(driver_pci20xxx_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index d330b188684..8b383ee959b 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -48,6 +48,7 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/timer.h>
+#include <linux/kernel.h>
 #include "comedi_pci.h"
 #include "jr3_pci.h"
 
@@ -123,12 +124,9 @@ struct jr3_pci_subdev_private {
 };
 
 /* Hotplug firmware loading stuff */
-
-typedef int comedi_firmware_callback(struct comedi_device *dev,
-				     const u8 * data, size_t size);
-
 static int comedi_load_firmware(struct comedi_device *dev, char *name,
-				comedi_firmware_callback cb)
+				int (*cb)(struct comedi_device *dev,
+					const u8 *data, size_t size))
 {
 	int result = 0;
 	const struct firmware *fw;
@@ -373,7 +371,7 @@ static int jr3_pci_ai_insn_read(struct comedi_device *dev,
 	return result;
 }
 
-static void jr3_pci_open(struct comedi_device *dev)
+static int jr3_pci_open(struct comedi_device *dev)
 {
 	int i;
 	struct jr3_pci_dev_private *devpriv = dev->private;
@@ -388,6 +386,7 @@ static void jr3_pci_open(struct comedi_device *dev)
 			       p->channel_no);
 		}
 	}
+	return 0;
 }
 
 int read_idm_word(const u8 * data, size_t size, int *pos, unsigned int *val)
@@ -399,14 +398,14 @@ int read_idm_word(const u8 * data, size_t size, int *pos, unsigned int *val)
 		}
 		/*  Collect value */
 		*val = 0;
-		for (; *pos < size && isxdigit(data[*pos]); (*pos)++) {
-			char ch = tolower(data[*pos]);
-			result = 1;
-			if ('0' <= ch && ch <= '9') {
-				*val = (*val << 4) + (ch - '0');
-			} else if ('a' <= ch && ch <= 'f') {
-				*val = (*val << 4) + (ch - 'a' + 10);
-			}
+		for (; *pos < size; (*pos)++) {
+			int value;
+			value = hex_to_bin(data[*pos]);
+			if (value >= 0) {
+				result = 1;
+				*val = (*val << 4) + value;
+			} else
+				break;
 		}
 	}
 	return result;
@@ -986,4 +985,44 @@ static int jr3_pci_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_jr3_pci, jr3_pci_pci_table);
+static int __devinit driver_jr3_pci_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_jr3_pci.driver_name);
+}
+
+static void __devexit driver_jr3_pci_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_jr3_pci_pci_driver = {
+	.id_table = jr3_pci_pci_table,
+	.probe = &driver_jr3_pci_pci_probe,
+	.remove = __devexit_p(&driver_jr3_pci_pci_remove)
+};
+
+static int __init driver_jr3_pci_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_jr3_pci);
+	if (retval < 0)
+		return retval;
+
+	driver_jr3_pci_pci_driver.name = (char *)driver_jr3_pci.driver_name;
+	return pci_register_driver(&driver_jr3_pci_pci_driver);
+}
+
+static void __exit driver_jr3_pci_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_jr3_pci_pci_driver);
+	comedi_driver_unregister(&driver_jr3_pci);
+}
+
+module_init(driver_jr3_pci_init_module);
+module_exit(driver_jr3_pci_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ke_counter.c b/drivers/staging/comedi/drivers/ke_counter.c
index 73b0445e310..286093bca3f 100644
--- a/drivers/staging/comedi/drivers/ke_counter.c
+++ b/drivers/staging/comedi/drivers/ke_counter.c
@@ -96,7 +96,43 @@ static struct comedi_driver cnt_driver = {
 	.detach = cnt_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(cnt_driver, cnt_pci_table);
+static int __devinit cnt_driver_pci_probe(struct pci_dev *dev,
+					  const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, cnt_driver.driver_name);
+}
+
+static void __devexit cnt_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver cnt_driver_pci_driver = {
+	.id_table = cnt_pci_table,
+	.probe = &cnt_driver_pci_probe,
+	.remove = __devexit_p(&cnt_driver_pci_remove)
+};
+
+static int __init cnt_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&cnt_driver);
+	if (retval < 0)
+		return retval;
+
+	cnt_driver_pci_driver.name = (char *)cnt_driver.driver_name;
+	return pci_register_driver(&cnt_driver_pci_driver);
+}
+
+static void __exit cnt_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&cnt_driver_pci_driver);
+	comedi_driver_unregister(&cnt_driver);
+}
+
+module_init(cnt_driver_init_module);
+module_exit(cnt_driver_cleanup_module);
 
 /*-- counter write ----------------------------------------------------------*/
 
@@ -152,7 +188,7 @@ static int cnt_rinsn(struct comedi_device *dev,
 static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
 	struct comedi_subdevice *subdevice;
-	struct pci_dev *pci_device;
+	struct pci_dev *pci_device = NULL;
 	struct cnt_board_struct *board;
 	unsigned long io_base;
 	int error, i;
@@ -163,9 +199,7 @@ static int cnt_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return error;
 
 	/* Probe the device to determine what device in the series it is. */
-	for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_device != NULL;
-	     pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) {
+	for_each_pci_dev(pci_device) {
 		if (pci_device->vendor == PCI_VENDOR_ID_KOLTER) {
 			for (i = 0; i < cnt_board_nbr; i++) {
 				if (cnt_boards[i].device_id ==
@@ -259,3 +293,7 @@ static int cnt_detach(struct comedi_device *dev)
 	       dev->minor);
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 8b9fa0f9f1f..14713849564 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -91,22 +91,22 @@ static DEFINE_PCI_DEVICE_TABLE(me4000_pci_table) = {
 MODULE_DEVICE_TABLE(pci, me4000_pci_table);
 
 static const struct me4000_board me4000_boards[] = {
-	{"ME-4650", 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}},
+	{"ME-4650", 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0} },
 
-	{"ME-4660", 0x4660, {0, 0}, {32, 0, 16, 0}, {4}, {3}},
-	{"ME-4660i", 0x4661, {0, 0}, {32, 0, 16, 0}, {4}, {3}},
-	{"ME-4660s", 0x4662, {0, 0}, {32, 8, 16, 0}, {4}, {3}},
-	{"ME-4660is", 0x4663, {0, 0}, {32, 8, 16, 0}, {4}, {3}},
+	{"ME-4660", 0x4660, {0, 0}, {32, 0, 16, 0}, {4}, {3} },
+	{"ME-4660i", 0x4661, {0, 0}, {32, 0, 16, 0}, {4}, {3} },
+	{"ME-4660s", 0x4662, {0, 0}, {32, 8, 16, 0}, {4}, {3} },
+	{"ME-4660is", 0x4663, {0, 0}, {32, 8, 16, 0}, {4}, {3} },
 
-	{"ME-4670", 0x4670, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
-	{"ME-4670i", 0x4671, {4, 0}, {32, 0, 16, 1}, {4}, {3}},
-	{"ME-4670s", 0x4672, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
-	{"ME-4670is", 0x4673, {4, 0}, {32, 8, 16, 1}, {4}, {3}},
+	{"ME-4670", 0x4670, {4, 0}, {32, 0, 16, 1}, {4}, {3} },
+	{"ME-4670i", 0x4671, {4, 0}, {32, 0, 16, 1}, {4}, {3} },
+	{"ME-4670s", 0x4672, {4, 0}, {32, 8, 16, 1}, {4}, {3} },
+	{"ME-4670is", 0x4673, {4, 0}, {32, 8, 16, 1}, {4}, {3} },
 
-	{"ME-4680", 0x4680, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
-	{"ME-4680i", 0x4681, {4, 4}, {32, 0, 16, 1}, {4}, {3}},
-	{"ME-4680s", 0x4682, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
-	{"ME-4680is", 0x4683, {4, 4}, {32, 8, 16, 1}, {4}, {3}},
+	{"ME-4680", 0x4680, {4, 4}, {32, 0, 16, 1}, {4}, {3} },
+	{"ME-4680i", 0x4681, {4, 4}, {32, 0, 16, 1}, {4}, {3} },
+	{"ME-4680s", 0x4682, {4, 4}, {32, 8, 16, 1}, {4}, {3} },
+	{"ME-4680is", 0x4683, {4, 4}, {32, 8, 16, 1}, {4}, {3} },
 
 	{0},
 };
@@ -120,10 +120,10 @@ static int me4000_attach(struct comedi_device *dev,
 			 struct comedi_devconfig *it);
 static int me4000_detach(struct comedi_device *dev);
 static struct comedi_driver driver_me4000 = {
-driver_name:"me4000",
-module:THIS_MODULE,
-attach:me4000_attach,
-detach:me4000_detach,
+driver_name: "me4000",
+module : THIS_MODULE,
+attach : me4000_attach,
+detach : me4000_detach,
 };
 
 /*-----------------------------------------------------------------------------
@@ -302,8 +302,8 @@ static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			if (request_irq(info->irq, me4000_ai_isr,
 					IRQF_SHARED, "ME-4000", dev)) {
 				printk
-				    ("comedi%d: me4000: me4000_attach(): Unable to allocate irq\n",
-				     dev->minor);
+				    ("comedi%d: me4000: me4000_attach(): "
+				     "Unable to allocate irq\n", dev->minor);
 			} else {
 				dev->read_subdev = s;
 				s->subdev_flags |= SDF_CMD_READ;
@@ -313,8 +313,8 @@ static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			}
 		} else {
 			printk(KERN_WARNING
-			       "comedi%d: me4000: me4000_attach(): No interrupt available\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_attach(): "
+			       "No interrupt available\n", dev->minor);
 		}
 	} else {
 		s->type = COMEDI_SUBD_UNUSED;
@@ -389,7 +389,7 @@ static int me4000_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 static int me4000_probe(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	struct pci_dev *pci_device;
+	struct pci_dev *pci_device = NULL;
 	int result, i;
 	struct me4000_board *board;
 
@@ -402,17 +402,21 @@ static int me4000_probe(struct comedi_device *dev, struct comedi_devconfig *it)
 	/*
 	 * Probe the device to determine what device in the series it is.
 	 */
-	for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_device != NULL;
-	     pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) {
+	for_each_pci_dev(pci_device) {
 		if (pci_device->vendor == PCI_VENDOR_ID_MEILHAUS) {
 			for (i = 0; i < ME4000_BOARD_VERSIONS; i++) {
 				if (me4000_boards[i].device_id ==
 				    pci_device->device) {
-					/* Was a particular bus/slot requested? */
+					/*
+					 * Was a particular
+					 * bus/slot requested?
+					 */
 					if ((it->options[0] != 0)
 					    || (it->options[1] != 0)) {
-						/* Are we on the wrong bus/slot? */
+						/*
+						 * Are we on the wrong
+						 * bus/slot?
+						 */
 						if (pci_device->bus->number !=
 						    it->options[0]
 						    ||
@@ -433,14 +437,16 @@ static int me4000_probe(struct comedi_device *dev, struct comedi_devconfig *it)
 	}
 
 	printk(KERN_ERR
-	       "comedi%d: me4000: me4000_probe(): No supported board found (req. bus/slot : %d/%d)\n",
+	       "comedi%d: me4000: me4000_probe(): "
+	       "No supported board found (req. bus/slot : %d/%d)\n",
 	       dev->minor, it->options[0], it->options[1]);
 	return -ENODEV;
 
 found:
 
 	printk(KERN_INFO
-	       "comedi%d: me4000: me4000_probe(): Found %s at PCI bus %d, slot %d\n",
+	       "comedi%d: me4000: me4000_probe(): "
+	       "Found %s at PCI bus %d, slot %d\n",
 	       dev->minor, me4000_boards[i].name, pci_device->bus->number,
 	       PCI_SLOT(pci_device->devfn));
 
@@ -451,8 +457,8 @@ found:
 	result = comedi_pci_enable(pci_device, dev->board_name);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot enable PCI device and request I/O regions\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): Cannot enable PCI "
+		       "device and request I/O regions\n", dev->minor);
 		return result;
 	}
 
@@ -460,16 +466,16 @@ found:
 	result = get_registers(dev, pci_device);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot get registers\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot get registers\n", dev->minor);
 		return result;
 	}
 	/* Initialize board info */
 	result = init_board_info(dev, pci_device);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot init baord info\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot init baord info\n", dev->minor);
 		return result;
 	}
 
@@ -477,8 +483,8 @@ found:
 	result = init_ao_context(dev);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot init ao context\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot init ao context\n", dev->minor);
 		return result;
 	}
 
@@ -486,8 +492,8 @@ found:
 	result = init_ai_context(dev);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot init ai context\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot init ai context\n", dev->minor);
 		return result;
 	}
 
@@ -495,8 +501,8 @@ found:
 	result = init_dio_context(dev);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot init dio context\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot init dio context\n", dev->minor);
 		return result;
 	}
 
@@ -504,8 +510,8 @@ found:
 	result = init_cnt_context(dev);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Cannot init cnt context\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Cannot init cnt context\n", dev->minor);
 		return result;
 	}
 
@@ -513,8 +519,8 @@ found:
 	result = xilinx_download(dev);
 	if (result) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_probe(): Can't download firmware\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_probe(): "
+		       "Can't download firmware\n", dev->minor);
 		return result;
 	}
 
@@ -535,24 +541,24 @@ static int get_registers(struct comedi_device *dev, struct pci_dev *pci_dev_p)
 
 	CALL_PDEBUG("In get_registers()\n");
 
-    /*--------------------------- plx regbase ---------------------------------*/
+    /*--------------------------- plx regbase -------------------------------*/
 
 	info->plx_regbase = pci_resource_start(pci_dev_p, 1);
 	if (info->plx_regbase == 0) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: get_registers(): PCI base address 1 is not available\n",
-		       dev->minor);
+		       "comedi%d: me4000: get_registers(): "
+		       "PCI base address 1 is not available\n", dev->minor);
 		return -ENODEV;
 	}
 	info->plx_regbase_size = pci_resource_len(pci_dev_p, 1);
 
-    /*--------------------------- me4000 regbase ------------------------------*/
+    /*--------------------------- me4000 regbase ----------------------------*/
 
 	info->me4000_regbase = pci_resource_start(pci_dev_p, 2);
 	if (info->me4000_regbase == 0) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: get_registers(): PCI base address 2 is not available\n",
-		       dev->minor);
+		       "comedi%d: me4000: get_registers(): "
+		       "PCI base address 2 is not available\n", dev->minor);
 		return -ENODEV;
 	}
 	info->me4000_regbase_size = pci_resource_len(pci_dev_p, 2);
@@ -562,19 +568,19 @@ static int get_registers(struct comedi_device *dev, struct pci_dev *pci_dev_p)
 	info->timer_regbase = pci_resource_start(pci_dev_p, 3);
 	if (info->timer_regbase == 0) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: get_registers(): PCI base address 3 is not available\n",
-		       dev->minor);
+		       "comedi%d: me4000: get_registers(): "
+		       "PCI base address 3 is not available\n", dev->minor);
 		return -ENODEV;
 	}
 	info->timer_regbase_size = pci_resource_len(pci_dev_p, 3);
 
-    /*--------------------------- program regbase ------------------------------*/
+    /*--------------------------- program regbase ----------------------------*/
 
 	info->program_regbase = pci_resource_start(pci_dev_p, 5);
 	if (info->program_regbase == 0) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: get_registers(): PCI base address 5 is not available\n",
-		       dev->minor);
+		       "comedi%d: me4000: get_registers(): "
+		       "PCI base address 5 is not available\n", dev->minor);
 		return -ENODEV;
 	}
 	info->program_regbase_size = pci_resource_len(pci_dev_p, 5);
@@ -800,8 +806,8 @@ static int xilinx_download(struct comedi_device *dev)
 	udelay(20);
 	if (!(inl(info->plx_regbase + PLX_INTCSR) & 0x20)) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: xilinx_download(): Can't init Xilinx\n",
-		       dev->minor);
+		       "comedi%d: me4000: xilinx_download(): "
+		       "Can't init Xilinx\n", dev->minor);
 		return -EIO;
 	}
 
@@ -810,8 +816,8 @@ static int xilinx_download(struct comedi_device *dev)
 	value &= ~0x100;
 	outl(value, info->plx_regbase + PLX_ICR);
 	if (FIRMWARE_NOT_AVAILABLE) {
-		comedi_error(dev,
-			     "xilinx firmware unavailable due to licensing, aborting");
+		comedi_error(dev, "xilinx firmware unavailable "
+			     "due to licensing, aborting");
 		return -EIO;
 	} else {
 		/* Download Xilinx firmware */
@@ -826,7 +832,8 @@ static int xilinx_download(struct comedi_device *dev)
 			/* Check if BUSY flag is low */
 			if (inl(info->plx_regbase + PLX_ICR) & 0x20) {
 				printk(KERN_ERR
-				       "comedi%d: me4000: xilinx_download(): Xilinx is still busy (idx = %d)\n",
+				       "comedi%d: me4000: xilinx_download(): "
+				       "Xilinx is still busy (idx = %d)\n",
 				       dev->minor, idx);
 				return -EIO;
 			}
@@ -837,11 +844,11 @@ static int xilinx_download(struct comedi_device *dev)
 	if (inl(info->plx_regbase + PLX_ICR) & 0x4) {
 	} else {
 		printk(KERN_ERR
-		       "comedi%d: me4000: xilinx_download(): DONE flag is not set\n",
-		       dev->minor);
+		       "comedi%d: me4000: xilinx_download(): "
+		       "DONE flag is not set\n", dev->minor);
 		printk(KERN_ERR
-		       "comedi%d: me4000: xilinx_download(): Download not successful\n",
-		       dev->minor);
+		       "comedi%d: me4000: xilinx_download(): "
+		       "Download not successful\n", dev->minor);
 		return -EIO;
 	}
 
@@ -902,7 +909,10 @@ static int reset_board(struct comedi_device *dev)
 	me4000_outl(dev, ME4000_AO_DEMUX_ADJUST_VALUE,
 		    info->me4000_regbase + ME4000_AO_DEMUX_ADJUST_REG);
 
-	/* Set digital I/O direction for port 0 to output on isolated versions */
+	/*
+	 * Set digital I/O direction for port 0
+	 * to output on isolated versions
+	 */
 	if (!(me4000_inl(dev, info->me4000_regbase + ME4000_DIO_DIR_REG) & 0x1)) {
 		me4000_outl(dev, 0x1,
 			    info->me4000_regbase + ME4000_DIO_CTRL_REG);
@@ -950,8 +960,8 @@ static int me4000_ai_insn_read(struct comedi_device *dev,
 		return 0;
 	} else if (insn->n > 1) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_insn_read(): Invalid instruction length %d\n",
-		       dev->minor, insn->n);
+		       "comedi%d: me4000: me4000_ai_insn_read(): "
+		       "Invalid instruction length %d\n", dev->minor, insn->n);
 		return -EINVAL;
 	}
 
@@ -970,8 +980,8 @@ static int me4000_ai_insn_read(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_insn_read(): Invalid range specified\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_insn_read(): "
+		       "Invalid range specified\n", dev->minor);
 		return -EINVAL;
 	}
 
@@ -980,8 +990,8 @@ static int me4000_ai_insn_read(struct comedi_device *dev,
 	case AREF_COMMON:
 		if (chan >= thisboard->ai.count) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_insn_read(): Analog input is not available\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_insn_read(): "
+			       "Analog input is not available\n", dev->minor);
 			return -EINVAL;
 		}
 		entry |= ME4000_AI_LIST_INPUT_SINGLE_ENDED | chan;
@@ -990,23 +1000,24 @@ static int me4000_ai_insn_read(struct comedi_device *dev,
 	case AREF_DIFF:
 		if (rang == 0 || rang == 1) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_insn_read(): Range must be bipolar when aref = diff\n",
+			       "comedi%d: me4000: me4000_ai_insn_read(): "
+			       "Range must be bipolar when aref = diff\n",
 			       dev->minor);
 			return -EINVAL;
 		}
 
 		if (chan >= thisboard->ai.diff_count) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_insn_read(): Analog input is not available\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_insn_read(): "
+			       "Analog input is not available\n", dev->minor);
 			return -EINVAL;
 		}
 		entry |= ME4000_AI_LIST_INPUT_DIFFERENTIAL | chan;
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_insn_read(): Invalid aref specified\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_insn_read(): "
+		       "Invalid aref specified\n", dev->minor);
 		return -EINVAL;
 	}
 
@@ -1045,8 +1056,8 @@ static int me4000_ai_insn_read(struct comedi_device *dev,
 	    (me4000_inl(dev, info->ai_context.status_reg) &
 	     ME4000_AI_STATUS_BIT_EF_DATA)) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_insn_read(): Value not available after wait\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_insn_read(): "
+		       "Value not available after wait\n", dev->minor);
 		return -EIO;
 	}
 
@@ -1086,24 +1097,24 @@ static int ai_check_chanlist(struct comedi_device *dev,
 	/* Check whether a channel list is available */
 	if (!cmd->chanlist_len) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: ai_check_chanlist(): No channel list available\n",
-		       dev->minor);
+		       "comedi%d: me4000: ai_check_chanlist(): "
+		       "No channel list available\n", dev->minor);
 		return -EINVAL;
 	}
 
 	/* Check the channel list size */
 	if (cmd->chanlist_len > ME4000_AI_CHANNEL_LIST_COUNT) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: ai_check_chanlist(): Channel list is to large\n",
-		       dev->minor);
+		       "comedi%d: me4000: ai_check_chanlist(): "
+		       "Channel list is to large\n", dev->minor);
 		return -EINVAL;
 	}
 
 	/* Check the pointer */
 	if (!cmd->chanlist) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: ai_check_chanlist(): NULL pointer to channel list\n",
-		       dev->minor);
+		       "comedi%d: me4000: ai_check_chanlist(): "
+		       "NULL pointer to channel list\n", dev->minor);
 		return -EFAULT;
 	}
 
@@ -1112,7 +1123,8 @@ static int ai_check_chanlist(struct comedi_device *dev,
 	for (i = 0; i < cmd->chanlist_len; i++) {
 		if (CR_AREF(cmd->chanlist[i]) != aref) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: ai_check_chanlist(): Mode is not equal for all entries\n",
+			       "comedi%d: me4000: ai_check_chanlist(): "
+			       "Mode is not equal for all entries\n",
 			       dev->minor);
 			return -EINVAL;
 		}
@@ -1124,8 +1136,8 @@ static int ai_check_chanlist(struct comedi_device *dev,
 			if (CR_CHAN(cmd->chanlist[i]) >=
 			    thisboard->ai.diff_count) {
 				printk(KERN_ERR
-				       "comedi%d: me4000: ai_check_chanlist(): Channel number to high\n",
-				       dev->minor);
+				       "comedi%d: me4000: ai_check_chanlist():"
+				       " Channel number to high\n", dev->minor);
 				return -EINVAL;
 			}
 		}
@@ -1133,8 +1145,8 @@ static int ai_check_chanlist(struct comedi_device *dev,
 		for (i = 0; i < cmd->chanlist_len; i++) {
 			if (CR_CHAN(cmd->chanlist[i]) >= thisboard->ai.count) {
 				printk(KERN_ERR
-				       "comedi%d: me4000: ai_check_chanlist(): Channel number to high\n",
-				       dev->minor);
+				       "comedi%d: me4000: ai_check_chanlist(): "
+				       "Channel number to high\n", dev->minor);
 				return -EINVAL;
 			}
 		}
@@ -1146,7 +1158,9 @@ static int ai_check_chanlist(struct comedi_device *dev,
 			if (CR_RANGE(cmd->chanlist[i]) != 1 &&
 			    CR_RANGE(cmd->chanlist[i]) != 2) {
 				printk(KERN_ERR
-				       "comedi%d: me4000: ai_check_chanlist(): Bipolar is not selected in differential mode\n",
+				       "comedi%d: me4000: ai_check_chanlist(): "
+				       "Bipolar is not selected in "
+				       "differential mode\n",
 				       dev->minor);
 				return -EINVAL;
 			}
@@ -1330,21 +1344,19 @@ static int ai_write_chanlist(struct comedi_device *dev,
 
 		entry = chan;
 
-		if (rang == 0) {
+		if (rang == 0)
 			entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_2_5;
-		} else if (rang == 1) {
+		else if (rang == 1)
 			entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_10;
-		} else if (rang == 2) {
+		else if (rang == 2)
 			entry |= ME4000_AI_LIST_RANGE_BIPOLAR_2_5;
-		} else {
+		else
 			entry |= ME4000_AI_LIST_RANGE_BIPOLAR_10;
-		}
 
-		if (aref == SDF_DIFF) {
+		if (aref == SDF_DIFF)
 			entry |= ME4000_AI_LIST_INPUT_DIFFERENTIAL;
-		} else {
+		else
 			entry |= ME4000_AI_LIST_INPUT_SINGLE_ENDED;
-		}
 
 		me4000_outl(dev, entry, info->ai_context.channel_list_reg);
 	}
@@ -1454,8 +1466,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start source\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid start source\n", dev->minor);
 		cmd->start_src = TRIG_NOW;
 		err++;
 	}
@@ -1470,8 +1482,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan begin source\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid scan begin source\n", dev->minor);
 		cmd->scan_begin_src = TRIG_FOLLOW;
 		err++;
 	}
@@ -1485,8 +1497,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert source\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid convert source\n", dev->minor);
 		cmd->convert_src = TRIG_TIMER;
 		err++;
 	}
@@ -1500,8 +1512,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end source\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid scan end source\n", dev->minor);
 		cmd->scan_end_src = TRIG_NONE;
 		err++;
 	}
@@ -1515,8 +1527,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop source\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid stop source\n", dev->minor);
 		cmd->stop_src = TRIG_NONE;
 		err++;
 	}
@@ -1546,8 +1558,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		   cmd->convert_src == TRIG_EXT) {
 	} else {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start trigger combination\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid start trigger combination\n", dev->minor);
 		cmd->start_src = TRIG_NOW;
 		cmd->scan_begin_src = TRIG_FOLLOW;
 		cmd->convert_src = TRIG_TIMER;
@@ -1563,8 +1575,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		   cmd->scan_end_src == TRIG_COUNT) {
 	} else {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop trigger combination\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Invalid stop trigger combination\n", dev->minor);
 		cmd->stop_src = TRIG_NONE;
 		cmd->scan_end_src = TRIG_NONE;
 		err++;
@@ -1577,29 +1589,29 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 	 */
 	if (cmd->chanlist_len < 1) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): No channel list\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "No channel list\n", dev->minor);
 		cmd->chanlist_len = 1;
 		err++;
 	}
 	if (init_ticks < 66) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Start arg to low\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Start arg to low\n", dev->minor);
 		cmd->start_arg = 2000;
 		err++;
 	}
 	if (scan_ticks && scan_ticks < 67) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Scan begin arg to low\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Scan begin arg to low\n", dev->minor);
 		cmd->scan_begin_arg = 2031;
 		err++;
 	}
 	if (chan_ticks < 66) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_do_cmd_test(): Convert arg to low\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+		       "Convert arg to low\n", dev->minor);
 		cmd->convert_arg = 2000;
 		err++;
 	}
@@ -1617,23 +1629,25 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (chan_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid convert arg\n", dev->minor);
 			cmd->convert_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (scan_ticks <= cmd->chanlist_len * chan_ticks) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n",
-			       dev->minor);
-			cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31;	/*  At least one tick more */
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid scan end arg\n", dev->minor);
+
+			/*  At least one tick more */
+			cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31;
 			err++;
 		}
 	} else if (cmd->start_src == TRIG_NOW &&
@@ -1643,15 +1657,15 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (chan_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid convert arg\n", dev->minor);
 			cmd->convert_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
@@ -1662,23 +1676,25 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (chan_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid convert arg\n", dev->minor);
 			cmd->convert_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (scan_ticks <= cmd->chanlist_len * chan_ticks) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n",
-			       dev->minor);
-			cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31;	/*  At least one tick more */
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid scan end arg\n", dev->minor);
+
+			/*  At least one tick more */
+			cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31;
 			err++;
 		}
 	} else if (cmd->start_src == TRIG_EXT &&
@@ -1688,15 +1704,15 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (chan_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid convert arg\n", dev->minor);
 			cmd->convert_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
@@ -1707,15 +1723,15 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
 		if (chan_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid convert arg\n", dev->minor);
 			cmd->convert_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
@@ -1726,8 +1742,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 		/* Check timer arguments */
 		if (init_ticks < ME4000_AI_MIN_TICKS) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid start arg\n", dev->minor);
 			cmd->start_arg = 2000;	/*  66 ticks at least */
 			err++;
 		}
@@ -1735,8 +1751,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 	if (cmd->stop_src == TRIG_COUNT) {
 		if (cmd->stop_arg == 0) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid stop arg\n", dev->minor);
 			cmd->stop_arg = 1;
 			err++;
 		}
@@ -1744,8 +1760,8 @@ static int me4000_ai_do_cmd_test(struct comedi_device *dev,
 	if (cmd->scan_end_src == TRIG_COUNT) {
 		if (cmd->scan_end_arg == 0) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_do_cmd_test(): "
+			       "Invalid scan end arg\n", dev->minor);
 			cmd->scan_end_arg = 1;
 			err++;
 		}
@@ -1786,8 +1802,8 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 	/* Check if irq number is right */
 	if (irq != ai_context->irq) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ai_isr(): Incorrect interrupt num: %d\n",
-		       dev->minor, irq);
+		       "comedi%d: me4000: me4000_ai_isr(): "
+		       "Incorrect interrupt num: %d\n", dev->minor, irq);
 		return IRQ_HANDLED;
 	}
 
@@ -1806,7 +1822,10 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 			ISR_PDEBUG("me4000_ai_isr(): Fifo full\n");
 			c = ME4000_AI_FIFO_COUNT;
 
-			/* FIFO overflow, so stop conversion and disable all interrupts */
+			/*
+			 * FIFO overflow, so stop conversion
+			 * and disable all interrupts
+			 */
 			tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP;
 			tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ |
 				 ME4000_AI_CTRL_BIT_SC_IRQ);
@@ -1815,8 +1834,8 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 			s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
 
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_isr(): FIFO overflow\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_isr(): "
+			       "FIFO overflow\n", dev->minor);
 		} else if ((tmp & ME4000_AI_STATUS_BIT_FF_DATA)
 			   && !(tmp & ME4000_AI_STATUS_BIT_HF_DATA)
 			   && (tmp & ME4000_AI_STATUS_BIT_EF_DATA)) {
@@ -1827,11 +1846,14 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 			c = ME4000_AI_FIFO_COUNT / 2;
 		} else {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_isr(): Can't determine state of fifo\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_isr(): "
+			       "Can't determine state of fifo\n", dev->minor);
 			c = 0;
 
-			/* Undefined state, so stop conversion and disable all interrupts */
+			/*
+			 * Undefined state, so stop conversion
+			 * and disable all interrupts
+			 */
 			tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP;
 			tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ |
 				 ME4000_AI_CTRL_BIT_SC_IRQ);
@@ -1840,8 +1862,8 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 			s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA;
 
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_ai_isr(): Undefined FIFO state\n",
-			       dev->minor);
+			       "comedi%d: me4000: me4000_ai_isr(): "
+			       "Undefined FIFO state\n", dev->minor);
 		}
 
 		ISR_PDEBUG("me4000_ai_isr(): Try to read %d values\n", c);
@@ -1852,7 +1874,10 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 			lval ^= 0x8000;
 
 			if (!comedi_buf_put(s->async, lval)) {
-				/* Buffer overflow, so stop conversion and disable all interrupts */
+				/*
+				 * Buffer overflow, so stop conversion
+				 * and disable all interrupts
+				 */
 				tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP;
 				tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ |
 					 ME4000_AI_CTRL_BIT_SC_IRQ);
@@ -1861,8 +1886,8 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 				s->async->events |= COMEDI_CB_OVERFLOW;
 
 				printk(KERN_ERR
-				       "comedi%d: me4000: me4000_ai_isr(): Buffer overflow\n",
-				       dev->minor);
+				       "comedi%d: me4000: me4000_ai_isr(): "
+				       "Buffer overflow\n", dev->minor);
 
 				break;
 			}
@@ -1883,7 +1908,10 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 
 		s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOA;
 
-		/* Acquisition is complete, so stop conversion and disable all interrupts */
+		/*
+		 * Acquisition is complete, so stop
+		 * conversion and disable all interrupts
+		 */
 		tmp = me4000_inl(dev, ai_context->ctrl_reg);
 		tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP;
 		tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ | ME4000_AI_CTRL_BIT_SC_IRQ);
@@ -1897,8 +1925,8 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
 
 			if (!comedi_buf_put(s->async, lval)) {
 				printk(KERN_ERR
-				       "comedi%d: me4000: me4000_ai_isr(): Buffer overflow\n",
-				       dev->minor);
+				       "comedi%d: me4000: me4000_ai_isr(): "
+				       "Buffer overflow\n", dev->minor);
 				s->async->events |= COMEDI_CB_OVERFLOW;
 				break;
 			}
@@ -1941,29 +1969,29 @@ static int me4000_ao_insn_write(struct comedi_device *dev,
 		return 0;
 	} else if (insn->n > 1) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ao_insn_write(): Invalid instruction length %d\n",
-		       dev->minor, insn->n);
+		       "comedi%d: me4000: me4000_ao_insn_write(): "
+		       "Invalid instruction length %d\n", dev->minor, insn->n);
 		return -EINVAL;
 	}
 
 	if (chan >= thisboard->ao.count) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ao_insn_write(): Invalid channel %d\n",
-		       dev->minor, insn->n);
+		       "comedi%d: me4000: me4000_ao_insn_write(): "
+		       "Invalid channel %d\n", dev->minor, insn->n);
 		return -EINVAL;
 	}
 
 	if (rang != 0) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ao_insn_write(): Invalid range %d\n",
-		       dev->minor, insn->n);
+		       "comedi%d: me4000: me4000_ao_insn_write(): "
+		       "Invalid range %d\n", dev->minor, insn->n);
 		return -EINVAL;
 	}
 
 	if (aref != AREF_GROUND && aref != AREF_COMMON) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_ao_insn_write(): Invalid aref %d\n",
-		       dev->minor, insn->n);
+		       "comedi%d: me4000: me4000_ao_insn_write(): "
+		       "Invalid aref %d\n", dev->minor, insn->n);
 		return -EINVAL;
 	}
 
@@ -1994,8 +2022,8 @@ static int me4000_ao_insn_read(struct comedi_device *dev,
 		return 0;
 	} else if (insn->n > 1) {
 		printk
-		    ("comedi%d: me4000: me4000_ao_insn_read(): Invalid instruction length\n",
-		     dev->minor);
+		    ("comedi%d: me4000: me4000_ao_insn_read(): "
+		     "Invalid instruction length\n", dev->minor);
 		return -EINVAL;
 	}
 
@@ -2021,8 +2049,8 @@ static int me4000_dio_insn_bits(struct comedi_device *dev,
 
 	if (insn->n != 2) {
 		printk
-		    ("comedi%d: me4000: me4000_dio_insn_bits(): Invalid instruction length\n",
-		     dev->minor);
+		    ("comedi%d: me4000: me4000_dio_insn_bits(): "
+		     "Invalid instruction length\n", dev->minor);
 		return -EINVAL;
 	}
 
@@ -2095,8 +2123,9 @@ static int me4000_dio_insn_config(struct comedi_device *dev,
 			tmp |= ME4000_DIO_CTRL_BIT_MODE_0;
 		} else if (chan < 16) {
 			/*
-			 * Chech for optoisolated ME-4000 version. If one the first
-			 * port is a fixed output port and the second is a fixed input port.
+			 * Chech for optoisolated ME-4000 version.
+			 * If one the first port is a fixed output
+			 * port and the second is a fixed input port.
 			 */
 			if (!me4000_inl(dev, info->dio_context.dir_reg))
 				return -ENODEV;
@@ -2121,8 +2150,9 @@ static int me4000_dio_insn_config(struct comedi_device *dev,
 	} else {
 		if (chan < 8) {
 			/*
-			 * Chech for optoisolated ME-4000 version. If one the first
-			 * port is a fixed output port and the second is a fixed input port.
+			 * Chech for optoisolated ME-4000 version.
+			 * If one the first port is a fixed output
+			 * port and the second is a fixed input port.
 			 */
 			if (!me4000_inl(dev, info->dio_context.dir_reg))
 				return -ENODEV;
@@ -2257,7 +2287,8 @@ static int me4000_cnt_insn_config(struct comedi_device *dev,
 	case GPCT_RESET:
 		if (insn->n != 1) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction length%d\n",
+			       "comedi%d: me4000: me4000_cnt_insn_config(): "
+			       "Invalid instruction length%d\n",
 			       dev->minor, insn->n);
 			return -EINVAL;
 		}
@@ -2269,7 +2300,8 @@ static int me4000_cnt_insn_config(struct comedi_device *dev,
 	case GPCT_SET_OPERATION:
 		if (insn->n != 2) {
 			printk(KERN_ERR
-			       "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction length%d\n",
+			       "comedi%d: me4000: me4000_cnt_insn_config(): "
+			       "Invalid instruction length%d\n",
 			       dev->minor, insn->n);
 			return -EINVAL;
 		}
@@ -2280,8 +2312,8 @@ static int me4000_cnt_insn_config(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction\n",
-		       dev->minor);
+		       "comedi%d: me4000: me4000_cnt_insn_config(): "
+		       "Invalid instruction\n", dev->minor);
 		return -EINVAL;
 	}
 
@@ -2302,7 +2334,8 @@ static int me4000_cnt_insn_read(struct comedi_device *dev,
 
 	if (insn->n > 1) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_cnt_insn_read(): Invalid instruction length %d\n",
+		       "comedi%d: me4000: me4000_cnt_insn_read(): "
+		       "Invalid instruction length %d\n",
 		       dev->minor, insn->n);
 		return -EINVAL;
 	}
@@ -2328,7 +2361,8 @@ static int me4000_cnt_insn_read(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_cnt_insn_read(): Invalid channel %d\n",
+		       "comedi%d: me4000: me4000_cnt_insn_read(): "
+		       "Invalid channel %d\n",
 		       dev->minor, insn->chanspec);
 		return -EINVAL;
 	}
@@ -2349,7 +2383,8 @@ static int me4000_cnt_insn_write(struct comedi_device *dev,
 		return 0;
 	} else if (insn->n > 1) {
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_cnt_insn_write(): Invalid instruction length %d\n",
+		       "comedi%d: me4000: me4000_cnt_insn_write(): "
+		       "Invalid instruction length %d\n",
 		       dev->minor, insn->n);
 		return -EINVAL;
 	}
@@ -2375,7 +2410,8 @@ static int me4000_cnt_insn_write(struct comedi_device *dev,
 		break;
 	default:
 		printk(KERN_ERR
-		       "comedi%d: me4000: me4000_cnt_insn_write(): Invalid channel %d\n",
+		       "comedi%d: me4000: me4000_cnt_insn_write(): "
+		       "Invalid channel %d\n",
 		       dev->minor, insn->chanspec);
 		return -EINVAL;
 	}
@@ -2383,4 +2419,44 @@ static int me4000_cnt_insn_write(struct comedi_device *dev,
 	return 1;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_me4000, me4000_pci_table);
+static int __devinit driver_me4000_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_me4000.driver_name);
+}
+
+static void __devexit driver_me4000_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_me4000_pci_driver = {
+	.id_table = me4000_pci_table,
+	.probe = &driver_me4000_pci_probe,
+	.remove = __devexit_p(&driver_me4000_pci_remove)
+};
+
+static int __init driver_me4000_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_me4000);
+	if (retval < 0)
+		return retval;
+
+	driver_me4000_pci_driver.name = (char *)driver_me4000.driver_name;
+	return pci_register_driver(&driver_me4000_pci_driver);
+}
+
+static void __exit driver_me4000_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_me4000_pci_driver);
+	comedi_driver_unregister(&driver_me4000);
+}
+
+module_init(driver_me4000_init_module);
+module_exit(driver_me4000_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/me_daq.c b/drivers/staging/comedi/drivers/me_daq.c
index c8484aec657..cda4b224b30 100644
--- a/drivers/staging/comedi/drivers/me_daq.c
+++ b/drivers/staging/comedi/drivers/me_daq.c
@@ -257,7 +257,43 @@ static struct comedi_driver me_driver = {
 	.detach = me_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(me_driver, me_pci_table);
+static int __devinit me_driver_pci_probe(struct pci_dev *dev,
+					 const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, me_driver.driver_name);
+}
+
+static void __devexit me_driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver me_driver_pci_driver = {
+	.id_table = me_pci_table,
+	.probe = &me_driver_pci_probe,
+	.remove = __devexit_p(&me_driver_pci_remove)
+};
+
+static int __init me_driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&me_driver);
+	if (retval < 0)
+		return retval;
+
+	me_driver_pci_driver.name = (char *)me_driver.driver_name;
+	return pci_register_driver(&me_driver_pci_driver);
+}
+
+static void __exit me_driver_cleanup_module(void)
+{
+	pci_unregister_driver(&me_driver_pci_driver);
+	comedi_driver_unregister(&me_driver);
+}
+
+module_init(me_driver_init_module);
+module_exit(me_driver_cleanup_module);
 
 /* Private data structure */
 struct me_private_data {
@@ -644,7 +680,7 @@ static int me_reset(struct comedi_device *dev)
  */
 static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 {
-	struct pci_dev *pci_device;
+	struct pci_dev *pci_device = NULL;
 	struct comedi_subdevice *subdevice;
 	struct me_board *board;
 	resource_size_t plx_regbase_tmp;
@@ -661,9 +697,7 @@ static int me_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return -ENOMEM;
 
 	/* Probe the device to determine what device in the series it is. */
-	for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pci_device != NULL;
-	     pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) {
+	for_each_pci_dev(pci_device) {
 		if (pci_device->vendor == PCI_VENDOR_ID_MEILHAUS) {
 			for (i = 0; i < me_board_nbr; i++) {
 				if (me_boards[i].device_id ==
@@ -857,3 +891,7 @@ static int me_detach(struct comedi_device *dev)
 	}
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index 99d9985c5b3..cd25b241cc1 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -70,12 +70,10 @@ EXPORT_SYMBOL(mite_devices);
 
 void mite_init(void)
 {
-	struct pci_dev *pcidev;
+	struct pci_dev *pcidev = NULL;
 	struct mite_struct *mite;
 
-	for (pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
-	     pcidev != NULL;
-	     pcidev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pcidev)) {
+	for_each_pci_dev(pcidev) {
 		if (pcidev->vendor == PCI_VENDOR_ID_NI) {
 			unsigned i;
 
@@ -829,3 +827,7 @@ void __exit cleanup_module(void)
 	mite_cleanup();
 }
 #endif
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index 9874ac3749c..a89eebd23f6 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -406,4 +406,19 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
 	return n;
 }
 
-COMEDI_INITCLEANUP(driver_mpc624);
+static int __init driver_mpc624_init_module(void)
+{
+	return comedi_driver_register(&driver_mpc624);
+}
+
+static void __exit driver_mpc624_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_mpc624);
+}
+
+module_init(driver_mpc624_init_module);
+module_exit(driver_mpc624_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/mpc8260cpm.c b/drivers/staging/comedi/drivers/mpc8260cpm.c
index 440a144a037..5f6816a3fe8 100644
--- a/drivers/staging/comedi/drivers/mpc8260cpm.c
+++ b/drivers/staging/comedi/drivers/mpc8260cpm.c
@@ -56,7 +56,18 @@ static struct comedi_driver driver_mpc8260cpm = {
 	.detach = mpc8260cpm_detach,
 };
 
-COMEDI_INITCLEANUP(driver_mpc8260cpm);
+static int __init driver_mpc8260cpm_init_module(void)
+{
+	return comedi_driver_register(&driver_mpc8260cpm);
+}
+
+static void __exit driver_mpc8260cpm_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_mpc8260cpm);
+}
+
+module_init(driver_mpc8260cpm_init_module);
+module_exit(driver_mpc8260cpm_cleanup_module);
 
 static int mpc8260cpm_dio_config(struct comedi_device *dev,
 				 struct comedi_subdevice *s,
diff --git a/drivers/staging/comedi/drivers/multiq3.c b/drivers/staging/comedi/drivers/multiq3.c
index 6b22f0f8f06..dace902d3bc 100644
--- a/drivers/staging/comedi/drivers/multiq3.c
+++ b/drivers/staging/comedi/drivers/multiq3.c
@@ -93,7 +93,18 @@ static struct comedi_driver driver_multiq3 = {
 	.detach = multiq3_detach,
 };
 
-COMEDI_INITCLEANUP(driver_multiq3);
+static int __init driver_multiq3_init_module(void)
+{
+	return comedi_driver_register(&driver_multiq3);
+}
+
+static void __exit driver_multiq3_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_multiq3);
+}
+
+module_init(driver_multiq3_init_module);
+module_exit(driver_multiq3_cleanup_module);
 
 struct multiq3_private {
 	unsigned int ao_readback[2];
@@ -338,3 +349,7 @@ static int multiq3_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 1fc76cc6a28..14e716e99a5 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -490,4 +490,40 @@ static int ni6527_find_device(struct comedi_device *dev, int bus, int slot)
 	return -EIO;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_ni6527, ni6527_pci_table);
+static int __devinit driver_ni6527_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_ni6527.driver_name);
+}
+
+static void __devexit driver_ni6527_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_ni6527_pci_driver = {
+	.id_table = ni6527_pci_table,
+	.probe = &driver_ni6527_pci_probe,
+	.remove = __devexit_p(&driver_ni6527_pci_remove)
+};
+
+static int __init driver_ni6527_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_ni6527);
+	if (retval < 0)
+		return retval;
+
+	driver_ni6527_pci_driver.name = (char *)driver_ni6527.driver_name;
+	return pci_register_driver(&driver_ni6527_pci_driver);
+}
+
+static void __exit driver_ni6527_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_ni6527_pci_driver);
+	comedi_driver_unregister(&driver_ni6527);
+}
+
+module_init(driver_ni6527_init_module);
+module_exit(driver_ni6527_cleanup_module);
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index d793f5a4ac9..8b8e2aaf77f 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -834,4 +834,40 @@ static int ni_65xx_find_device(struct comedi_device *dev, int bus, int slot)
 	return -EIO;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_ni_65xx, ni_65xx_pci_table);
+static int __devinit driver_ni_65xx_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_ni_65xx.driver_name);
+}
+
+static void __devexit driver_ni_65xx_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_ni_65xx_pci_driver = {
+	.id_table = ni_65xx_pci_table,
+	.probe = &driver_ni_65xx_pci_probe,
+	.remove = __devexit_p(&driver_ni_65xx_pci_remove)
+};
+
+static int __init driver_ni_65xx_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_ni_65xx);
+	if (retval < 0)
+		return retval;
+
+	driver_ni_65xx_pci_driver.name = (char *)driver_ni_65xx.driver_name;
+	return pci_register_driver(&driver_ni_65xx_pci_driver);
+}
+
+static void __exit driver_ni_65xx_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_ni_65xx_pci_driver);
+	comedi_driver_unregister(&driver_ni_65xx);
+}
+
+module_init(driver_ni_65xx_init_module);
+module_exit(driver_ni_65xx_cleanup_module);
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 6a6fae53ea0..6612b085c4e 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -382,7 +382,7 @@ enum global_interrupt_config_register_bits {
 	Global_Int_Enable_Bit = 0x80000000
 };
 
-/* Offset of the GPCT chips from the base-adress of the card */
+/* Offset of the GPCT chips from the base-address of the card */
 /* First chip is at base-address + 0x00, etc. */
 static const unsigned GPCT_OFFSET[2] = { 0x0, 0x800 };
 
@@ -471,7 +471,43 @@ static struct comedi_driver driver_ni_660x = {
 	.detach = ni_660x_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_ni_660x, ni_660x_pci_table);
+static int __devinit driver_ni_660x_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_ni_660x.driver_name);
+}
+
+static void __devexit driver_ni_660x_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_ni_660x_pci_driver = {
+	.id_table = ni_660x_pci_table,
+	.probe = &driver_ni_660x_pci_probe,
+	.remove = __devexit_p(&driver_ni_660x_pci_remove)
+};
+
+static int __init driver_ni_660x_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_ni_660x);
+	if (retval < 0)
+		return retval;
+
+	driver_ni_660x_pci_driver.name = (char *)driver_ni_660x.driver_name;
+	return pci_register_driver(&driver_ni_660x_pci_driver);
+}
+
+static void __exit driver_ni_660x_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_ni_660x_pci_driver);
+	comedi_driver_unregister(&driver_ni_660x);
+}
+
+module_init(driver_ni_660x_init_module);
+module_exit(driver_ni_660x_cleanup_module);
 
 static int ni_660x_find_device(struct comedi_device *dev, int bus, int slot);
 static int ni_660x_set_pfi_routing(struct comedi_device *dev, unsigned chan,
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index 44ae8368454..e9f034efdc6 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -120,7 +120,43 @@ static struct comedi_driver driver_ni_670x = {
 	.detach = ni_670x_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_ni_670x, ni_670x_pci_table);
+static int __devinit driver_ni_670x_pci_probe(struct pci_dev *dev,
+					      const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_ni_670x.driver_name);
+}
+
+static void __devexit driver_ni_670x_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_ni_670x_pci_driver = {
+	.id_table = ni_670x_pci_table,
+	.probe = &driver_ni_670x_pci_probe,
+	.remove = __devexit_p(&driver_ni_670x_pci_remove)
+};
+
+static int __init driver_ni_670x_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_ni_670x);
+	if (retval < 0)
+		return retval;
+
+	driver_ni_670x_pci_driver.name = (char *)driver_ni_670x.driver_name;
+	return pci_register_driver(&driver_ni_670x_pci_driver);
+}
+
+static void __exit driver_ni_670x_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_ni_670x_pci_driver);
+	comedi_driver_unregister(&driver_ni_670x);
+}
+
+module_init(driver_ni_670x_init_module);
+module_exit(driver_ni_670x_cleanup_module);
 
 static struct comedi_lrange range_0_20mA = { 1, {RANGE_mA(0, 20)} };
 
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 9bff34cf06d..e46d62b75fc 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -197,7 +197,18 @@ static int a2150_set_chanlist(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_a2150);
+static int __init driver_a2150_init_module(void)
+{
+	return comedi_driver_register(&driver_a2150);
+}
+
+static void __exit driver_a2150_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_a2150);
+}
+
+module_init(driver_a2150_init_module);
+module_exit(driver_a2150_cleanup_module);
 
 #ifdef A2150_DEBUG
 
@@ -910,3 +921,7 @@ static int a2150_set_chanlist(struct comedi_device *dev,
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_at_ao.c b/drivers/staging/comedi/drivers/ni_at_ao.c
index ce60224bb7b..138dcc2275a 100644
--- a/drivers/staging/comedi/drivers/ni_at_ao.c
+++ b/drivers/staging/comedi/drivers/ni_at_ao.c
@@ -194,7 +194,18 @@ static struct comedi_driver driver_atao = {
 	.num_names = ARRAY_SIZE(atao_boards),
 };
 
-COMEDI_INITCLEANUP(driver_atao);
+static int __init driver_atao_init_module(void)
+{
+	return comedi_driver_register(&driver_atao);
+}
+
+static void __exit driver_atao_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_atao);
+}
+
+module_init(driver_atao_init_module);
+module_exit(driver_atao_cleanup_module);
 
 static void atao_reset(struct comedi_device *dev);
 
@@ -459,3 +470,7 @@ static int atao_calib_insn_write(struct comedi_device *dev,
 
 	return insn->n;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_atmio.c b/drivers/staging/comedi/drivers/ni_atmio.c
index 003d00b595b..3330b3d53e8 100644
--- a/drivers/staging/comedi/drivers/ni_atmio.c
+++ b/drivers/staging/comedi/drivers/ni_atmio.c
@@ -349,7 +349,18 @@ static struct comedi_driver driver_atmio = {
 	.detach = ni_atmio_detach,
 };
 
-COMEDI_INITCLEANUP(driver_atmio);
+static int __init driver_atmio_init_module(void)
+{
+	return comedi_driver_register(&driver_atmio);
+}
+
+static void __exit driver_atmio_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_atmio);
+}
+
+module_init(driver_atmio_init_module);
+module_exit(driver_atmio_cleanup_module);
 
 #include "ni_mio_common.c"
 
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c b/drivers/staging/comedi/drivers/ni_atmio16d.c
index cf4f241f210..285b933551a 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -151,7 +151,18 @@ static struct comedi_driver driver_atmio16d = {
 	.offset = sizeof(struct atmio16_board_t),
 };
 
-COMEDI_INITCLEANUP(driver_atmio16d);
+static int __init driver_atmio16d_init_module(void)
+{
+	return comedi_driver_register(&driver_atmio16d);
+}
+
+static void __exit driver_atmio16d_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_atmio16d);
+}
+
+module_init(driver_atmio16d_init_module);
+module_exit(driver_atmio16d_cleanup_module);
 
 /* range structs */
 static const struct comedi_lrange range_atmio16d_ai_10_bipolar = { 4, {
@@ -887,3 +898,7 @@ static int atmio16d_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 6ec77bf88c6..cc15666e5cc 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -47,7 +47,6 @@ IRQ is assigned but not used.
 
 #include <linux/ioport.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -377,7 +376,7 @@ static int dio700_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		link = pcmcia_cur_dev;	/* XXX hack */
 		if (!link)
 			return -EIO;
-		iobase = link->io.BasePort1;
+		iobase = link->resource[0]->start;
 #ifdef incomplete
 		irq = link->irq;
 #endif
@@ -459,14 +458,6 @@ static void dio700_cs_detach(struct pcmcia_device *);
    less on other parts of the kernel.
 */
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static const dev_info_t dev_info = "ni_daq_700";
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
@@ -537,8 +528,7 @@ static void dio700_cs_detach(struct pcmcia_device *link)
 	dio700_release(link);
 
 	/* This points to the parent struct local_info_t struct */
-	if (link->priv)
-		kfree(link->priv);
+	kfree(link->priv);
 
 }				/* dio700_cs_detach */
 
@@ -556,9 +546,6 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-	memreq_t map;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -572,44 +559,25 @@ static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -623,7 +591,7 @@ static void dio700_config(struct pcmcia_device *link)
 
 	dev_dbg(&link->dev, "dio700_config\n");
 
-	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -645,15 +613,10 @@ static void dio700_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
+	if (link->resource[0])
+		printk(", io %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -723,7 +686,7 @@ struct pcmcia_driver dio700_cs_driver = {
 	.id_table = dio700_cs_ids,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "ni_daq_700",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index e4865b1c231..773ae2044e0 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -48,7 +48,6 @@ the PCMCIA interface.
 
 #include "8255.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -129,7 +128,7 @@ static int dio24_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		link = pcmcia_cur_dev;	/* XXX hack */
 		if (!link)
 			return -EIO;
-		iobase = link->io.BasePort1;
+		iobase = link->resource[0]->start;
 #ifdef incomplete
 		irq = link->irq;
 #endif
@@ -211,14 +210,6 @@ static void dio24_cs_detach(struct pcmcia_device *);
    less on other parts of the kernel.
 */
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static const dev_info_t dev_info = "ni_daq_dio24";
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
@@ -289,8 +280,7 @@ static void dio24_cs_detach(struct pcmcia_device *link)
 	dio24_release(link);
 
 	/* This points to the parent local_info_t struct */
-	if (link->priv)
-		kfree(link->priv);
+	kfree(link->priv);
 
 }				/* dio24_cs_detach */
 
@@ -308,9 +298,6 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-	memreq_t map;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -324,44 +311,25 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -369,13 +337,12 @@ static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
 static void dio24_config(struct pcmcia_device *link)
 {
 	int ret;
-	win_req_t req;
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
 
 	dev_dbg(&link->dev, "dio24_config\n");
 
-	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -397,15 +364,10 @@ static void dio24_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -474,7 +436,7 @@ struct pcmcia_driver dio24_cs_driver = {
 	.id_table = dio24_cs_ids,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "ni_daq_dio24",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 67c8a538802..3acf7e62bec 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -526,7 +526,8 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 	unsigned long dma_flags, isr_flags;
 	short lsb, msb;
 
-	printk("comedi%d: ni_labpc: %s, io 0x%lx", dev->minor, thisboard->name,
+	printk(KERN_ERR "comedi%d: ni_labpc: %s, io 0x%lx", dev->minor,
+								thisboard->name,
 	       iobase);
 	if (irq)
 		printk(", irq %u", irq);
@@ -543,7 +544,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 		/* check if io addresses are available */
 		if (!request_region(iobase, LABPC_SIZE,
 				    driver_labpc.driver_name)) {
-			printk("I/O port conflict\n");
+			printk(KERN_ERR "I/O port conflict\n");
 			return -EIO;
 		}
 	}
@@ -575,7 +576,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 			isr_flags |= IRQF_SHARED;
 		if (request_irq(irq, labpc_interrupt, isr_flags,
 				driver_labpc.driver_name, dev)) {
-			printk("unable to allocate irq %u\n", irq);
+			printk(KERN_ERR "unable to allocate irq %u\n", irq);
 			return -EINVAL;
 		}
 	}
@@ -583,18 +584,18 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 
 	/* grab dma channel */
 	if (dma_chan > 3) {
-		printk(" invalid dma channel %u\n", dma_chan);
+		printk(KERN_ERR " invalid dma channel %u\n", dma_chan);
 		return -EINVAL;
 	} else if (dma_chan) {
 		/* allocate dma buffer */
 		devpriv->dma_buffer =
 		    kmalloc(dma_buffer_size, GFP_KERNEL | GFP_DMA);
 		if (devpriv->dma_buffer == NULL) {
-			printk(" failed to allocate dma buffer\n");
+			printk(KERN_ERR " failed to allocate dma buffer\n");
 			return -ENOMEM;
 		}
 		if (request_dma(dma_chan, driver_labpc.driver_name)) {
-			printk(" failed to allocate dma channel %u\n",
+			printk(KERN_ERR " failed to allocate dma channel %u\n",
 			       dma_chan);
 			return -EINVAL;
 		}
@@ -690,7 +691,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
 		for (i = 0; i < EEPROM_SIZE; i++)
 			devpriv->eeprom_data[i] = labpc_eeprom_read(dev, i);
 #ifdef LABPC_DEBUG
-		printk(" eeprom:");
+		printk(KERN_ERR " eeprom:");
 		for (i = 0; i < EEPROM_SIZE; i++)
 			printk(" %i:0x%x ", i, devpriv->eeprom_data[i]);
 		printk("\n");
@@ -732,7 +733,8 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		iobase = (unsigned long)devpriv->mite->daq_io_addr;
 		irq = mite_irq(devpriv->mite);
 #else
-		printk(" this driver has not been built with PCI support.\n");
+		printk(KERN_ERR " this driver has not been built with PCI "
+								"support.\n");
 		return -EINVAL;
 #endif
 		break;
@@ -742,7 +744,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return -EINVAL;
 		break;
 	default:
-		printk("bug! couldn't determine board type\n");
+		printk(KERN_ERR "bug! couldn't determine board type\n");
 		return -EINVAL;
 		break;
 	}
@@ -776,7 +778,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 			}
 		}
 	}
-	printk("no device found\n");
+	printk(KERN_ERR "no device found\n");
 	mite_list_devices();
 	return -EIO;
 }
@@ -784,7 +786,7 @@ static int labpc_find_device(struct comedi_device *dev, int bus, int slot)
 
 int labpc_common_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: ni_labpc: detach\n", dev->minor);
+	printk(KERN_ERR "comedi%d: ni_labpc: detach\n", dev->minor);
 
 	if (dev->subdevices)
 		subdev_8255_cleanup(dev, dev->subdevices + 2);
@@ -846,7 +848,7 @@ static enum scan_mode labpc_ai_scan_mode(const struct comedi_cmd *cmd)
 	if (CR_CHAN(cmd->chanlist[0]) > CR_CHAN(cmd->chanlist[1]))
 		return MODE_MULT_CHAN_DOWN;
 
-	printk("ni_labpc: bug! this should never happen\n");
+	printk(KERN_ERR "ni_labpc: bug! this should never happen\n");
 
 	return 0;
 }
@@ -902,7 +904,7 @@ static int labpc_ai_chanlist_invalid(const struct comedi_device *dev,
 			}
 			break;
 		default:
-			printk("ni_labpc: bug! in chanlist check\n");
+			printk(KERN_ERR "ni_labpc: bug! in chanlist check\n");
 			return 1;
 			break;
 		}
@@ -1096,7 +1098,10 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
 			err++;
 		}
 		break;
-		/*  TRIG_EXT doesn't care since it doesn't trigger off a numbered channel */
+		/*
+		 * TRIG_EXT doesn't care since it doesn't
+		 * trigger off a numbered channel
+		 */
 	default:
 		break;
 	}
@@ -1154,25 +1159,35 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
 	/*  setup hardware conversion counter */
 	if (cmd->stop_src == TRIG_EXT) {
-		/*  load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0 */
+		/*
+		 * load counter a1 with count of 3
+		 * (pc+ manual says this is minimum allowed) using mode 0
+		 */
 		ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
 					 1, 3, 0);
 		if (ret < 0) {
 			comedi_error(dev, "error loading counter a1");
 			return -1;
 		}
-	} else			/*  otherwise, just put a1 in mode 0 with no count to set its output low */
+	} else			/*
+				 * otherwise, just put a1 in mode 0
+				 * with no count to set its output low
+				 */
 		devpriv->write_byte(INIT_A1_BITS,
 				    dev->iobase + COUNTER_A_CONTROL_REG);
 
 	/*  figure out what method we will use to transfer data */
 	if (devpriv->dma_chan &&	/*  need a dma channel allocated */
-	    /*  dma unsafe at RT priority, and too much setup time for TRIG_WAKE_EOS for */
+		/*
+		 * dma unsafe at RT priority,
+		 * and too much setup time for TRIG_WAKE_EOS for
+		 */
 	    (cmd->flags & (TRIG_WAKE_EOS | TRIG_RT)) == 0 &&
 	    /*  only available on the isa boards */
 	    thisboard->bustype == isa_bustype) {
 		xfer = isa_dma_transfer;
-	} else if (thisboard->register_layout == labpc_1200_layout &&	/*  pc-plus has no fifo-half full interrupt */
+		/* pc-plus has no fifo-half full interrupt */
+	} else if (thisboard->register_layout == labpc_1200_layout &&
 		   /*  wake-end-of-scan should interrupt on fifo not empty */
 		   (cmd->flags & TRIG_WAKE_EOS) == 0 &&
 		   /*  make sure we are taking more than just a few points */
@@ -1619,7 +1634,10 @@ static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
 		devpriv->command4_bits |= ADC_DIFF_BIT;
 	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
-	/* initialize pacer counter output to make sure it doesn't cause any problems */
+	/*
+	 * initialize pacer counter output to make sure it doesn't
+	 * cause any problems
+	 */
 	devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
 
 	labpc_clear_adc_fifo(dev);
@@ -1844,7 +1862,10 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
 		unsigned int scan_period;
 
 		scan_period = labpc_ai_scan_period(cmd);
-		/* calculate cascaded counter values that give desired scan timing */
+		/*
+		 * calculate cascaded counter values
+		 * that give desired scan timing
+		 */
 		i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
 					       &(devpriv->divisor_b1),
 					       &(devpriv->divisor_b0),
@@ -1855,7 +1876,10 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
 		unsigned int convert_period;
 
 		convert_period = labpc_ai_convert_period(cmd);
-		/* calculate cascaded counter values that give desired conversion timing */
+		/*
+		 * calculate cascaded counter values
+		 * that give desired conversion timing
+		 */
 		i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
 					       &(devpriv->divisor_a0),
 					       &(devpriv->divisor_b0),
@@ -2076,9 +2100,56 @@ static void write_caldac(struct comedi_device *dev, unsigned int channel,
 }
 
 #ifdef CONFIG_COMEDI_PCI
-COMEDI_PCI_INITCLEANUP(driver_labpc, labpc_pci_table);
+static int __devinit driver_labpc_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_labpc.driver_name);
+}
+
+static void __devexit driver_labpc_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_labpc_pci_driver = {
+	.id_table = labpc_pci_table,
+	.probe = &driver_labpc_pci_probe,
+	.remove = __devexit_p(&driver_labpc_pci_remove)
+};
+
+static int __init driver_labpc_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_labpc);
+	if (retval < 0)
+		return retval;
+
+	driver_labpc_pci_driver.name = (char *)driver_labpc.driver_name;
+	return pci_register_driver(&driver_labpc_pci_driver);
+}
+
+static void __exit driver_labpc_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_labpc_pci_driver);
+	comedi_driver_unregister(&driver_labpc);
+}
+
+module_init(driver_labpc_init_module);
+module_exit(driver_labpc_cleanup_module);
 #else
-COMEDI_INITCLEANUP(driver_labpc);
+static int __init driver_labpc_init_module(void)
+{
+	return comedi_driver_register(&driver_labpc);
+}
+
+static void __exit driver_labpc_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_labpc);
+}
+
+module_init(driver_labpc_init_module);
+module_exit(driver_labpc_cleanup_module);
 #endif
 
 EXPORT_SYMBOL_GPL(labpc_common_attach);
@@ -2086,3 +2157,7 @@ EXPORT_SYMBOL_GPL(labpc_common_detach);
 EXPORT_SYMBOL_GPL(range_labpc_1200_ai);
 EXPORT_SYMBOL_GPL(labpc_1200_ai_gain_bits);
 EXPORT_SYMBOL_GPL(labpc_1200_is_unipolar);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 163245ebb31..68c4ecbd93a 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -71,7 +71,6 @@ NI manuals:
 #include "comedi_fc.h"
 #include "ni_labpc.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -143,7 +142,7 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		link = pcmcia_cur_dev;	/* XXX hack */
 		if (!link)
 			return -EIO;
-		iobase = link->io.BasePort1;
+		iobase = link->resource[0]->start;
 		irq = link->irq;
 		break;
 	default:
@@ -189,14 +188,6 @@ static void labpc_cs_detach(struct pcmcia_device *);
    less on other parts of the kernel.
 */
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static const dev_info_t dev_info = "daqcard-1200";
-
 struct local_info_t {
 	struct pcmcia_device *link;
 	int stop;
@@ -286,9 +277,6 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 				unsigned int vcc,
 				void *priv_data)
 {
-	win_req_t *req = priv_data;
-	memreq_t map;
-
 	if (cfg->index == 0)
 		return -ENODEV;
 
@@ -302,44 +290,25 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+		if (pcmcia_request_io(p_dev) != 0)
 			return -ENODEV;
 	}
 
-	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
-		cistpl_mem_t *mem =
-			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
-		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-		req->Attributes |= WIN_ENABLE;
-		req->Base = mem->win[0].host_addr;
-		req->Size = mem->win[0].len;
-		if (req->Size < 0x1000)
-			req->Size = 0x1000;
-		req->AccessSpeed = 0;
-		if (pcmcia_request_window(p_dev, req, &p_dev->win))
-			return -ENODEV;
-		map.Page = 0;
-		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
-			return -ENODEV;
-	}
 	/* If we got this far, we're cool! */
 	return 0;
 }
@@ -348,11 +317,10 @@ static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
 static void labpc_config(struct pcmcia_device *link)
 {
 	int ret;
-	win_req_t req;
 
 	dev_dbg(&link->dev, "labpc_config\n");
 
-	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req);
+	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL);
 	if (ret) {
 		dev_warn(&link->dev, "no configuration found\n");
 		goto failed;
@@ -374,15 +342,10 @@ static void labpc_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
-	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", req.Base,
-		       req.Base + req.Size - 1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -449,7 +412,7 @@ struct pcmcia_driver labpc_cs_driver = {
 	.id_table = labpc_cs_ids,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "daqcard-1200",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 3a46f0c0bff..1f2426352eb 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver.
 #include "ni_stc.h"
 #include "8255.h"
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -261,12 +260,11 @@ static void cs_release(struct pcmcia_device *link);
 static void cs_detach(struct pcmcia_device *);
 
 static struct pcmcia_device *cur_dev = NULL;
-static const dev_info_t dev_info = "ni_mio_cs";
 
 static int cs_attach(struct pcmcia_device *link)
 {
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	link->io.NumPorts1 = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+	link->resource[0]->end = 16;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -311,13 +309,12 @@ static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
 {
 	int base, ret;
 
-	p_dev->io.NumPorts1 = cfg->io.win[0].len;
-	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
-	p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = cfg->io.win[0].len;
+	p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK;
 
 	for (base = 0x000; base < 0x400; base += 0x20) {
-		p_dev->io.BasePort1 = base;
-		ret = pcmcia_request_io(p_dev, &p_dev->io);
+		p_dev->resource[0]->start = base;
+		ret = pcmcia_request_io(p_dev);
 		if (!ret)
 			return 0;
 	}
@@ -356,7 +353,7 @@ static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		return -EIO;
 
 	dev->driver = &driver_ni_mio_cs;
-	dev->iobase = link->io.BasePort1;
+	dev->iobase = link->resource[0]->start;
 
 	irq = link->irq;
 
@@ -450,7 +447,7 @@ struct pcmcia_driver ni_mio_cs_driver = {
 	.id_table = ni_mio_cs_ids,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "ni_mio_cs",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index b126638d33b..84a15c34e48 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -1317,4 +1317,40 @@ static int nidio_find_device(struct comedi_device *dev, int bus, int slot)
 	return -EIO;
 }
 
-COMEDI_PCI_INITCLEANUP(driver_pcidio, ni_pcidio_pci_table);
+static int __devinit driver_pcidio_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pcidio.driver_name);
+}
+
+static void __devexit driver_pcidio_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pcidio_pci_driver = {
+	.id_table = ni_pcidio_pci_table,
+	.probe = &driver_pcidio_pci_probe,
+	.remove = __devexit_p(&driver_pcidio_pci_remove)
+};
+
+static int __init driver_pcidio_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pcidio);
+	if (retval < 0)
+		return retval;
+
+	driver_pcidio_pci_driver.name = (char *)driver_pcidio.driver_name;
+	return pci_register_driver(&driver_pcidio_pci_driver);
+}
+
+static void __exit driver_pcidio_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pcidio_pci_driver);
+	comedi_driver_unregister(&driver_pcidio);
+}
+
+module_init(driver_pcidio_init_module);
+module_exit(driver_pcidio_cleanup_module);
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 577fda84190..23a38124728 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1239,7 +1239,43 @@ static struct comedi_driver driver_pcimio = {
 	.detach = pcimio_detach,
 };
 
-COMEDI_PCI_INITCLEANUP(driver_pcimio, ni_pci_table)
+static int __devinit driver_pcimio_pci_probe(struct pci_dev *dev,
+					     const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_pcimio.driver_name);
+}
+
+static void __devexit driver_pcimio_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_pcimio_pci_driver = {
+	.id_table = ni_pci_table,
+	.probe = &driver_pcimio_pci_probe,
+	.remove = __devexit_p(&driver_pcimio_pci_remove)
+};
+
+static int __init driver_pcimio_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_pcimio);
+	if (retval < 0)
+		return retval;
+
+	driver_pcimio_pci_driver.name = (char *)driver_pcimio.driver_name;
+	return pci_register_driver(&driver_pcimio_pci_driver);
+}
+
+static void __exit driver_pcimio_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_pcimio_pci_driver);
+	comedi_driver_unregister(&driver_pcimio);
+}
+
+module_init(driver_pcimio_init_module);
+module_exit(driver_pcimio_cleanup_module);
 
 struct ni_private {
 NI_PRIVATE_COMMON};
diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c
index 13e5b264ff0..a9bb6b13dfc 100644
--- a/drivers/staging/comedi/drivers/ni_tio.c
+++ b/drivers/staging/comedi/drivers/ni_tio.c
@@ -302,7 +302,7 @@ struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device *dev,
 									ni_gpct_register
 									reg),
 						unsigned (*read_register)
-						(struct ni_gpct * counter,
+						(struct ni_gpct *counter,
 						 enum ni_gpct_register reg),
 						enum ni_gpct_variant variant,
 						unsigned num_counters)
@@ -332,6 +332,7 @@ struct ni_gpct_device *ni_gpct_device_construct(struct comedi_device *dev,
 	counter_dev->num_counters = num_counters;
 	return counter_dev;
 }
+EXPORT_SYMBOL_GPL(ni_gpct_device_construct);
 
 void ni_gpct_device_destroy(struct ni_gpct_device *counter_dev)
 {
@@ -340,6 +341,7 @@ void ni_gpct_device_destroy(struct ni_gpct_device *counter_dev)
 	kfree(counter_dev->counters);
 	kfree(counter_dev);
 }
+EXPORT_SYMBOL_GPL(ni_gpct_device_destroy);
 
 static int ni_tio_second_gate_registers_present(const struct ni_gpct_device
 						*counter_dev)
@@ -418,6 +420,7 @@ void ni_tio_init_counter(struct ni_gpct *counter)
 			NITIO_Gi_Interrupt_Enable_Reg(counter->counter_index),
 			~0, 0x0);
 }
+EXPORT_SYMBOL_GPL(ni_tio_init_counter);
 
 static unsigned int ni_tio_counter_status(struct ni_gpct *counter)
 {
@@ -446,9 +449,7 @@ static void ni_tio_set_sync_mode(struct ni_gpct *counter, int force_alt_sync)
 	if (ni_tio_counting_mode_registers_present(counter_dev) == 0)
 		return;
 
-	switch (ni_tio_get_soft_copy(counter,
-				     counting_mode_reg) & Gi_Counting_Mode_Mask)
-	{
+	switch (ni_tio_get_soft_copy(counter, counting_mode_reg) & Gi_Counting_Mode_Mask) {
 	case Gi_Counting_Mode_QuadratureX1_Bits:
 	case Gi_Counting_Mode_QuadratureX2_Bits:
 	case Gi_Counting_Mode_QuadratureX4_Bits:
@@ -513,9 +514,8 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode)
 		counting_mode_bits |=
 		    ((mode >> NI_GPCT_INDEX_PHASE_BITSHIFT) <<
 		     Gi_Index_Phase_Bitshift) & Gi_Index_Phase_Mask;
-		if (mode & NI_GPCT_INDEX_ENABLE_BIT) {
+		if (mode & NI_GPCT_INDEX_ENABLE_BIT)
 			counting_mode_bits |= Gi_Index_Mode_Bit;
-		}
 		ni_tio_set_bits(counter,
 				NITIO_Gi_Counting_Mode_Reg(counter->
 							   counter_index),
@@ -529,12 +529,10 @@ static int ni_tio_set_counter_mode(struct ni_gpct *counter, unsigned mode)
 			(mode >> NI_GPCT_COUNTING_DIRECTION_SHIFT) <<
 			Gi_Up_Down_Shift);
 
-	if (mode & NI_GPCT_OR_GATE_BIT) {
+	if (mode & NI_GPCT_OR_GATE_BIT)
 		input_select_bits |= Gi_Or_Gate_Bit;
-	}
-	if (mode & NI_GPCT_INVERT_OUTPUT_BIT) {
+	if (mode & NI_GPCT_INVERT_OUTPUT_BIT)
 		input_select_bits |= Gi_Output_Polarity_Bit;
-	}
 	ni_tio_set_bits(counter,
 			NITIO_Gi_Input_Select_Reg(counter->counter_index),
 			Gi_Gate_Select_Load_Source_Bit | Gi_Or_Gate_Bit |
@@ -600,6 +598,7 @@ int ni_tio_arm(struct ni_gpct *counter, int arm, unsigned start_trigger)
 				  0, 0, command_transient_bits);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ni_tio_arm);
 
 static unsigned ni_660x_source_select_bits(unsigned int clock_source)
 {
@@ -706,7 +705,7 @@ static unsigned ni_m_series_source_select_bits(unsigned int clock_source)
 		}
 		if (i <= ni_m_series_max_pfi_channel)
 			break;
-		printk("invalid clock source 0x%lx\n",
+		printk(KERN_ERR "invalid clock source 0x%lx\n",
 		       (unsigned long)clock_source);
 		BUG();
 		ni_m_series_clock = 0;
@@ -1026,14 +1025,12 @@ static void ni_tio_set_first_gate_modifiers(struct ni_gpct *counter,
 	const unsigned mode_mask = Gi_Gate_Polarity_Bit | Gi_Gating_Mode_Mask;
 	unsigned mode_values = 0;
 
-	if (gate_source & CR_INVERT) {
+	if (gate_source & CR_INVERT)
 		mode_values |= Gi_Gate_Polarity_Bit;
-	}
-	if (gate_source & CR_EDGE) {
+	if (gate_source & CR_EDGE)
 		mode_values |= Gi_Rising_Edge_Gating_Bits;
-	} else {
+	else
 		mode_values |= Gi_Level_Gating_Bits;
-	}
 	ni_tio_set_bits(counter, NITIO_Gi_Mode_Reg(counter->counter_index),
 			mode_mask, mode_values);
 }
@@ -1290,6 +1287,7 @@ int ni_tio_set_gate_src(struct ni_gpct *counter, unsigned gate_index,
 	}
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ni_tio_set_gate_src);
 
 static int ni_tio_set_other_src(struct ni_gpct *counter, unsigned index,
 				unsigned int source)
@@ -1531,12 +1529,10 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
 			BUG();
 			break;
 		}
-		if (mode_bits & Gi_Gate_Polarity_Bit) {
+		if (mode_bits & Gi_Gate_Polarity_Bit)
 			*gate_source |= CR_INVERT;
-		}
-		if ((mode_bits & Gi_Gating_Mode_Mask) != Gi_Level_Gating_Bits) {
+		if ((mode_bits & Gi_Gating_Mode_Mask) != Gi_Level_Gating_Bits)
 			*gate_source |= CR_EDGE;
-		}
 		break;
 	case 1:
 		if ((mode_bits & Gi_Gating_Mode_Mask) == Gi_Gating_Disabled_Bits
@@ -1572,9 +1568,8 @@ static int ni_tio_get_gate_src(struct ni_gpct *counter, unsigned gate_index,
 			*gate_source |= CR_INVERT;
 		}
 		/* second gate can't have edge/level mode set independently */
-		if ((mode_bits & Gi_Gating_Mode_Mask) != Gi_Level_Gating_Bits) {
+		if ((mode_bits & Gi_Gating_Mode_Mask) != Gi_Level_Gating_Bits)
 			*gate_source |= CR_EDGE;
-		}
 		break;
 	default:
 		return -EINVAL;
@@ -1627,6 +1622,7 @@ int ni_tio_insn_config(struct ni_gpct *counter,
 	}
 	return -EINVAL;
 }
+EXPORT_SYMBOL_GPL(ni_tio_insn_config);
 
 int ni_tio_rinsn(struct ni_gpct *counter, struct comedi_insn *insn,
 		 unsigned int *data)
@@ -1681,6 +1677,7 @@ int ni_tio_rinsn(struct ni_gpct *counter, struct comedi_insn *insn,
 	};
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ni_tio_rinsn);
 
 static unsigned ni_tio_next_load_register(struct ni_gpct *counter)
 {
@@ -1688,11 +1685,10 @@ static unsigned ni_tio_next_load_register(struct ni_gpct *counter)
 					    NITIO_Gxx_Status_Reg(counter->
 								 counter_index));
 
-	if (bits & Gi_Next_Load_Source_Bit(counter->counter_index)) {
+	if (bits & Gi_Next_Load_Source_Bit(counter->counter_index))
 		return NITIO_Gi_LoadB_Reg(counter->counter_index);
-	} else {
+	else
 		return NITIO_Gi_LoadA_Reg(counter->counter_index);
-	}
 }
 
 int ni_tio_winsn(struct ni_gpct *counter, struct comedi_insn *insn,
@@ -1735,12 +1731,4 @@ int ni_tio_winsn(struct ni_gpct *counter, struct comedi_insn *insn,
 	}
 	return 0;
 }
-
-EXPORT_SYMBOL_GPL(ni_tio_rinsn);
 EXPORT_SYMBOL_GPL(ni_tio_winsn);
-EXPORT_SYMBOL_GPL(ni_tio_insn_config);
-EXPORT_SYMBOL_GPL(ni_tio_init_counter);
-EXPORT_SYMBOL_GPL(ni_tio_arm);
-EXPORT_SYMBOL_GPL(ni_tio_set_gate_src);
-EXPORT_SYMBOL_GPL(ni_gpct_device_construct);
-EXPORT_SYMBOL_GPL(ni_gpct_device_destroy);
diff --git a/drivers/staging/comedi/drivers/pcl711.c b/drivers/staging/comedi/drivers/pcl711.c
index a499f7070f7..b44386a6b63 100644
--- a/drivers/staging/comedi/drivers/pcl711.c
+++ b/drivers/staging/comedi/drivers/pcl711.c
@@ -171,7 +171,18 @@ static struct comedi_driver driver_pcl711 = {
 	.offset = sizeof(struct pcl711_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl711);
+static int __init driver_pcl711_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl711);
+}
+
+static void __exit driver_pcl711_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl711);
+}
+
+module_init(driver_pcl711_init_module);
+module_exit(driver_pcl711_cleanup_module);
 
 struct pcl711_private {
 
@@ -270,7 +281,7 @@ static int pcl711_ai_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 				goto ok;
 			udelay(1);
 		}
-		printk("comedi%d: pcl711: A/D timeout\n", dev->minor);
+		printk(KERN_ERR "comedi%d: pcl711: A/D timeout\n", dev->minor);
 		return -ETIME;
 
 ok:
@@ -505,7 +516,7 @@ static int pcl711_do_insn_bits(struct comedi_device *dev,
 /*  Free any resources that we have claimed  */
 static int pcl711_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: pcl711: remove\n", dev->minor);
+	printk(KERN_INFO "comedi%d: pcl711: remove\n", dev->minor);
 
 	if (dev->irq)
 		free_irq(dev->irq, dev);
@@ -527,7 +538,7 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/* claim our I/O space */
 
 	iobase = it->options[0];
-	printk("comedi%d: pcl711: 0x%04lx ", dev->minor, iobase);
+	printk(KERN_INFO "comedi%d: pcl711: 0x%04lx ", dev->minor, iobase);
 	if (!request_region(iobase, PCL711_SIZE, "pcl711")) {
 		printk("I/O port conflict\n");
 		return -EIO;
@@ -542,15 +553,15 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	/* grab our IRQ */
 	irq = it->options[1];
 	if (irq > this_board->maxirq) {
-		printk("irq out of range\n");
+		printk(KERN_ERR "irq out of range\n");
 		return -EINVAL;
 	}
 	if (irq) {
 		if (request_irq(irq, pcl711_interrupt, 0, "pcl711", dev)) {
-			printk("unable to allocate irq %u\n", irq);
+			printk(KERN_ERR "unable to allocate irq %u\n", irq);
 			return -EINVAL;
 		} else {
-			printk("( irq = %u )\n", irq);
+			printk(KERN_INFO "( irq = %u )\n", irq);
 		}
 	}
 	dev->irq = irq;
@@ -624,7 +635,11 @@ static int pcl711_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	outb(0, dev->iobase + PCL711_DA1_LO);
 	outb(0, dev->iobase + PCL711_DA1_HI);
 
-	printk("\n");
+	printk(KERN_INFO "\n");
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl724.c b/drivers/staging/comedi/drivers/pcl724.c
index 0f103c32806..396a058bb67 100644
--- a/drivers/staging/comedi/drivers/pcl724.c
+++ b/drivers/staging/comedi/drivers/pcl724.c
@@ -93,7 +93,18 @@ static struct comedi_driver driver_pcl724 = {
 	.offset = sizeof(struct pcl724_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl724);
+static int __init driver_pcl724_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl724);
+}
+
+static void __exit driver_pcl724_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl724);
+}
+
+module_init(driver_pcl724_init_module);
+module_exit(driver_pcl724_cleanup_module);
 
 static int subdev_8255_cb(int dir, int port, int data, unsigned long arg)
 {
@@ -221,3 +232,7 @@ static int pcl724_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl725.c b/drivers/staging/comedi/drivers/pcl725.c
index 60261f4ba5b..24b223ca439 100644
--- a/drivers/staging/comedi/drivers/pcl725.c
+++ b/drivers/staging/comedi/drivers/pcl725.c
@@ -30,7 +30,18 @@ static struct comedi_driver driver_pcl725 = {
 	.detach = pcl725_detach,
 };
 
-COMEDI_INITCLEANUP(driver_pcl725);
+static int __init driver_pcl725_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl725);
+}
+
+static void __exit driver_pcl725_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl725);
+}
+
+module_init(driver_pcl725_init_module);
+module_exit(driver_pcl725_cleanup_module);
 
 static int pcl725_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
@@ -110,3 +121,7 @@ static int pcl725_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl726.c b/drivers/staging/comedi/drivers/pcl726.c
index 6a1a9790a90..897cd808eeb 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -162,7 +162,18 @@ static struct comedi_driver driver_pcl726 = {
 	.offset = sizeof(struct pcl726_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl726);
+static int __init driver_pcl726_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl726);
+}
+
+static void __exit driver_pcl726_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl726);
+}
+
+module_init(driver_pcl726_init_module);
+module_exit(driver_pcl726_cleanup_module);
 
 struct pcl726_private {
 
@@ -381,3 +392,7 @@ static int pcl726_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl730.c b/drivers/staging/comedi/drivers/pcl730.c
index e5e7bed21de..c9682d614e0 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -55,7 +55,18 @@ static struct comedi_driver driver_pcl730 = {
 	.offset = sizeof(struct pcl730_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl730);
+static int __init driver_pcl730_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl730);
+}
+
+static void __exit driver_pcl730_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl730);
+}
+
+module_init(driver_pcl730_init_module);
+module_exit(driver_pcl730_cleanup_module);
 
 static int pcl730_do_insn(struct comedi_device *dev, struct comedi_subdevice *s,
 			  struct comedi_insn *insn, unsigned int *data)
@@ -166,3 +177,7 @@ static int pcl730_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 1ddc19c705a..c6dce4a1425 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -15,97 +15,98 @@
  *  card:   A-823PGH, A-823PGL, A-826PG
  * driver:  a823pgh,  a823pgl,  a826pg
  */
+
 /*
-Driver: pcl812
-Description: Advantech PCL-812/PG, PCL-813/B,
-             ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
-             ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
-             ICP DAS ISO-813
-Author: Michal Dobes <dobes@tesnet.cz>
-Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
-  PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
-  ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
-  [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
-  A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
-  A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
-Updated: Mon, 06 Aug 2007 12:03:15 +0100
-Status: works (I hope. My board fire up under my hands
-               and I cann't test all features.)
-
-This driver supports insn and cmd interfaces. Some boards support only insn
-becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
-Data transfer over DMA is supported only when you measure only one
-channel, this is too hardware limitation of these boards.
-
-Options for PCL-812:
-  [0] - IO Base
-  [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
-  [2] - DMA  (0=disable, 1, 3)
-  [3] - 0=trigger source is internal 8253 with 2MHz clock
-        1=trigger source is external
-  [4] - 0=A/D input range is +/-10V
-        1=A/D input range is +/-5V
-        2=A/D input range is +/-2.5V
-        3=A/D input range is +/-1.25V
-        4=A/D input range is +/-0.625V
-        5=A/D input range is +/-0.3125V
-  [5] - 0=D/A outputs 0-5V  (internal reference -5V)
-        1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknown (external reference)
-
-Options for PCL-812PG, ACL-8112PG:
-  [0] - IO Base
-  [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
-  [2] - DMA  (0=disable, 1, 3)
-  [3] - 0=trigger source is internal 8253 with 2MHz clock
-        1=trigger source is external
-  [4] - 0=A/D have max +/-5V input
-        1=A/D have max +/-10V input
-  [5] - 0=D/A outputs 0-5V  (internal reference -5V)
-        1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknown (external reference)
-
-Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
-  [0] - IO Base
-  [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
-  [2] - DMA  (0=disable, 1, 3)
-  [3] - 0=trigger source is internal 8253 with 2MHz clock
-        1=trigger source is external
-  [4] - 0=A/D channels are S.E.
-        1=A/D channels are DIFF
-  [5] - 0=D/A outputs 0-5V  (internal reference -5V)
-        1=D/A outputs 0-10V (internal reference -10V)
-        2=D/A outputs unknown (external reference)
-
-Options for A-821PGL/PGH:
-  [0] - IO Base
-  [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
-  [2] - 0=A/D channels are S.E.
-        1=A/D channels are DIFF
-  [3] - 0=D/A output 0-5V  (internal reference -5V)
-        1=D/A output 0-10V (internal reference -10V)
-
-Options for A-821PGL-NDA:
-  [0] - IO Base
-  [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
-  [2] - 0=A/D channels are S.E.
-        1=A/D channels are DIFF
-
-Options for PCL-813:
-  [0] - IO Base
-
-Options for PCL-813B:
-  [0] - IO Base
-  [1] - 0= bipolar inputs
-        1= unipolar inputs
-
-Options for ACL-8113, ISO-813:
-  [0] - IO Base
-  [1] - 0= 10V bipolar inputs
-        1= 10V unipolar inputs
-        2= 20V bipolar inputs
-        3= 20V unipolar inputs
-*/
+ * Driver: pcl812
+ * Description: Advantech PCL-812/PG, PCL-813/B,
+ *	     ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
+ *	     ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
+ *	     ICP DAS ISO-813
+ * Author: Michal Dobes <dobes@tesnet.cz>
+ * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
+ *	PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
+ *	ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
+ *	[ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
+ *	A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
+ *	A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
+ * Updated: Mon, 06 Aug 2007 12:03:15 +0100
+ * Status: works (I hope. My board fire up under my hands
+ *	       and I cann't test all features.)
+ *
+ * This driver supports insn and cmd interfaces. Some boards support only insn
+ * becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
+ * Data transfer over DMA is supported only when you measure only one
+ * channel, this is too hardware limitation of these boards.
+ *
+ * Options for PCL-812:
+ *   [0] - IO Base
+ *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ *   [2] - DMA  (0=disable, 1, 3)
+ *   [3] - 0=trigger source is internal 8253 with 2MHz clock
+ *         1=trigger source is external
+ *   [4] - 0=A/D input range is +/-10V
+ *	   1=A/D input range is +/-5V
+ *	   2=A/D input range is +/-2.5V
+ *	   3=A/D input range is +/-1.25V
+ *	   4=A/D input range is +/-0.625V
+ *	   5=A/D input range is +/-0.3125V
+ *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
+ *	   1=D/A outputs 0-10V (internal reference -10V)
+ *	   2=D/A outputs unknown (external reference)
+ *
+ * Options for PCL-812PG, ACL-8112PG:
+ *   [0] - IO Base
+ *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ *   [2] - DMA  (0=disable, 1, 3)
+ *   [3] - 0=trigger source is internal 8253 with 2MHz clock
+ *	   1=trigger source is external
+ *   [4] - 0=A/D have max +/-5V input
+ *	   1=A/D have max +/-10V input
+ *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
+ *	   1=D/A outputs 0-10V (internal reference -10V)
+ *	   2=D/A outputs unknown (external reference)
+ *
+ * Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
+ *   [0] - IO Base
+ *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ *   [2] - DMA  (0=disable, 1, 3)
+ *   [3] - 0=trigger source is internal 8253 with 2MHz clock
+ *	   1=trigger source is external
+ *   [4] - 0=A/D channels are S.E.
+ *	   1=A/D channels are DIFF
+ *   [5] - 0=D/A outputs 0-5V  (internal reference -5V)
+ *	   1=D/A outputs 0-10V (internal reference -10V)
+ *	   2=D/A outputs unknown (external reference)
+ *
+ * Options for A-821PGL/PGH:
+ *   [0] - IO Base
+ *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
+ *   [2] - 0=A/D channels are S.E.
+ *	   1=A/D channels are DIFF
+ *   [3] - 0=D/A output 0-5V  (internal reference -5V)
+ *	   1=D/A output 0-10V (internal reference -10V)
+ *
+ * Options for A-821PGL-NDA:
+ *   [0] - IO Base
+ *   [1] - IRQ  (0=disable, 2, 3, 4, 5, 6, 7)
+ *   [2] - 0=A/D channels are S.E.
+ *	   1=A/D channels are DIFF
+ *
+ * Options for PCL-813:
+ *   [0] - IO Base
+ *
+ * Options for PCL-813B:
+ *   [0] - IO Base
+ *   [1] - 0= bipolar inputs
+ *	   1= unipolar inputs
+ *
+ * Options for ACL-8113, ISO-813:
+ *   [0] - IO Base
+ *   [1] - 0= 10V bipolar inputs
+ *	   1= 10V unipolar inputs
+ *	   2= 20V bipolar inputs
+ *	   3= 20V unipolar inputs
+ */
 
 #include <linux/interrupt.h>
 #include <linux/gfp.h>
@@ -117,49 +118,50 @@ Options for ACL-8113, ISO-813:
 
 #include "8253.h"
 
-#undef PCL812_EXTDEBUG		/* if this is defined then a lot of messages is printed */
+/* if this is defined then a lot of messages is printed */
+#undef PCL812_EXTDEBUG
 
 /* hardware types of the cards */
-#define boardPCL812PG 		 0	/* and ACL-8112PG */
-#define boardPCL813B 		 1
-#define boardPCL812		 2
-#define boardPCL813 		 3
-#define boardISO813 		 5
-#define boardACL8113 		 6
-#define boardACL8112 		 7	/* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
-#define boardACL8216		 8	/* and ICP DAS A-826PG */
-#define boardA821		 9	/* PGH, PGL, PGL/NDA versions */
-
-#define PCLx1x_IORANGE 		16
-
-#define PCL812_CTR0		 0
-#define PCL812_CTR1		 1
-#define PCL812_CTR2		 2
-#define PCL812_CTRCTL		 3
-#define PCL812_AD_LO		 4
-#define PCL812_DA1_LO		 4
-#define PCL812_AD_HI		 5
-#define PCL812_DA1_HI		 5
-#define PCL812_DA2_LO		 6
-#define PCL812_DI_LO		 6
-#define PCL812_DA2_HI		 7
-#define PCL812_DI_HI		 7
-#define PCL812_CLRINT		 8
-#define PCL812_GAIN		 9
-#define PCL812_MUX		10
-#define PCL812_MODE		11
-#define PCL812_CNTENABLE 	10
-#define PCL812_SOFTTRIG 	12
-#define PCL812_DO_LO		13
-#define PCL812_DO_HI 		14
-
-#define PCL812_DRDY 		0x10	/* =0 data ready */
-
-#define ACL8216_STATUS 		 8	/* 5. bit signalize data ready */
-
-#define ACL8216_DRDY 		0x20	/* =0 data ready */
-
-#define MAX_CHANLIST_LEN	256	/* length of scan list */
+#define boardPCL812PG	      0	/* and ACL-8112PG */
+#define boardPCL813B	      1
+#define boardPCL812	      2
+#define boardPCL813	      3
+#define boardISO813	      5
+#define boardACL8113	      6
+#define boardACL8112	      7 /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
+#define boardACL8216	      8	/* and ICP DAS A-826PG */
+#define boardA821	      9	/* PGH, PGL, PGL/NDA versions */
+
+#define PCLx1x_IORANGE	     16
+
+#define PCL812_CTR0	      0
+#define PCL812_CTR1	      1
+#define PCL812_CTR2	      2
+#define PCL812_CTRCTL	      3
+#define PCL812_AD_LO	      4
+#define PCL812_DA1_LO	      4
+#define PCL812_AD_HI	      5
+#define PCL812_DA1_HI	      5
+#define PCL812_DA2_LO	      6
+#define PCL812_DI_LO	      6
+#define PCL812_DA2_HI	      7
+#define PCL812_DI_HI	      7
+#define PCL812_CLRINT	      8
+#define PCL812_GAIN	      9
+#define PCL812_MUX	     10
+#define PCL812_MODE	     11
+#define PCL812_CNTENABLE     10
+#define PCL812_SOFTTRIG	     12
+#define PCL812_DO_LO	     13
+#define PCL812_DO_HI	     14
+
+#define PCL812_DRDY	   0x10	/* =0 data ready */
+
+#define ACL8216_STATUS	      8	/* 5. bit signalize data ready */
+
+#define ACL8216_DRDY	   0x20	/* =0 data ready */
+
+#define MAX_CHANLIST_LEN    256	/* length of scan list */
 
 static const struct comedi_lrange range_pcl812pg_ai = { 5, {
 							    BIP_RANGE(5),
@@ -407,7 +409,18 @@ static struct comedi_driver driver_pcl812 = {
 	.offset = sizeof(struct pcl812_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl812);
+static int __init driver_pcl812_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl812);
+}
+
+static void __exit driver_pcl812_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl812);
+}
+
+module_init(driver_pcl812_init_module);
+module_exit(driver_pcl812_cleanup_module);
 
 struct pcl812_private {
 
@@ -466,10 +479,13 @@ static int pcl812_ai_insn_read(struct comedi_device *dev,
 	int n;
 	int timeout, hi;
 
-	outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE);	/* select software trigger */
-	setup_range_channel(dev, s, insn->chanspec, 1);	/*  select channel and renge */
+	/* select software trigger */
+	outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE);
+	/*  select channel and renge */
+	setup_range_channel(dev, s, insn->chanspec, 1);
 	for (n = 0; n < insn->n; n++) {
-		outb(255, dev->iobase + PCL812_SOFTTRIG);	/* start conversion */
+		/* start conversion */
+		outb(255, dev->iobase + PCL812_SOFTTRIG);
 		udelay(5);
 		timeout = 50;	/* wait max 50us, it must finish under 33us */
 		while (timeout--) {
@@ -501,10 +517,13 @@ static int acl8216_ai_insn_read(struct comedi_device *dev,
 	int n;
 	int timeout;
 
-	outb(1, dev->iobase + PCL812_MODE);	/* select software trigger */
-	setup_range_channel(dev, s, insn->chanspec, 1);	/*  select channel and renge */
+	/* select software trigger */
+	outb(1, dev->iobase + PCL812_MODE);
+	/*  select channel and renge */
+	setup_range_channel(dev, s, insn->chanspec, 1);
 	for (n = 0; n < insn->n; n++) {
-		outb(255, dev->iobase + PCL812_SOFTTRIG);	/* start conversion */
+		/* start conversion */
+		outb(255, dev->iobase + PCL812_SOFTTRIG);
 		udelay(5);
 		timeout = 50;	/* wait max 50us, it must finish under 33us */
 		while (timeout--) {
@@ -558,9 +577,8 @@ static int pcl812_ao_insn_read(struct comedi_device *dev,
 	int chan = CR_CHAN(insn->chanspec);
 	int i;
 
-	for (i = 0; i < insn->n; i++) {
+	for (i = 0; i < insn->n; i++)
 		data[i] = devpriv->ao_readback[chan];
-	}
 
 	return i;
 }
@@ -608,14 +626,15 @@ static int pcl812_do_insn_bits(struct comedi_device *dev,
 */
 static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
 {
-	printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+	printk(KERN_INFO "pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
 	       cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
-	printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+	printk(KERN_INFO "pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
 	       cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
-	printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
-	       cmd->scan_end_src);
-	printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
-	       cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
+	printk(KERN_INFO "pcl812 e=%d stopsrc=%x scanend=%x\n", e,
+	       cmd->stop_src, cmd->scan_end_src);
+	printk(KERN_INFO "pcl812 e=%d stoparg=%d scanendarg=%d "
+	       "chanlistlen=%d\n", e, cmd->stop_arg, cmd->scan_end_arg,
+	       cmd->chanlist_len);
 }
 #endif
 
@@ -645,11 +664,11 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
 		err++;
 
 	tmp = cmd->convert_src;
-	if (devpriv->use_ext_trg) {
+	if (devpriv->use_ext_trg)
 		cmd->convert_src &= TRIG_EXT;
-	} else {
+	else
 		cmd->convert_src &= TRIG_TIMER;
-	}
+
 	if (!cmd->convert_src || tmp != cmd->convert_src)
 		err++;
 
@@ -673,7 +692,10 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
 		return 1;
 	}
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources are
+	 * unique and mutually compatible
+	 */
 
 	if (cmd->start_src != TRIG_NOW) {
 		cmd->start_src = TRIG_NOW;
@@ -807,7 +829,7 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	struct comedi_cmd *cmd = &s->async->cmd;
 
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
 #endif
 
 	if (cmd->start_src != TRIG_NOW)
@@ -842,13 +864,15 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	devpriv->ai_n_chan = cmd->chanlist_len;
 	memcpy(devpriv->ai_chanlist, cmd->chanlist,
 	       sizeof(unsigned int) * cmd->scan_end_arg);
-	setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);	/*  select first channel and range */
+	/*  select first channel and range */
+	setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);
 
 	if (devpriv->dma) {	/*  check if we can use DMA transfer */
 		devpriv->ai_dma = 1;
 		for (i = 1; i < devpriv->ai_n_chan; i++)
 			if (devpriv->ai_chanlist[0] != devpriv->ai_chanlist[i]) {
-				devpriv->ai_dma = 0;	/*  we cann't use DMA :-( */
+				/*  we cann't use DMA :-( */
+				devpriv->ai_dma = 0;
 				break;
 			}
 	} else
@@ -869,14 +893,18 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	devpriv->ai_poll_ptr = 0;
 	s->async->cur_chan = 0;
 
-	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan? */
+	/*  don't we want wake up every scan? */
+	if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
 		devpriv->ai_eos = 1;
+
+		/*  DMA is useless for this situation */
 		if (devpriv->ai_n_chan == 1)
-			devpriv->ai_dma = 0;	/*  DMA is useless for this situation */
+			devpriv->ai_dma = 0;
 	}
 
 	if (devpriv->ai_dma) {
-		if (devpriv->ai_eos) {	/*  we use EOS, so adapt DMA buffer to one scan */
+		/*  we use EOS, so adapt DMA buffer to one scan */
+		if (devpriv->ai_eos) {
 			devpriv->dmabytestomove[0] =
 			    devpriv->ai_n_chan * sizeof(short);
 			devpriv->dmabytestomove[1] =
@@ -894,9 +922,17 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			if (devpriv->ai_neverending) {
 				devpriv->dma_runs_to_end = 1;
 			} else {
-				bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short);	/*  how many samples we must transfer? */
-				devpriv->dma_runs_to_end = bytes / devpriv->dmabytestomove[0];	/*  how many DMA pages we must fill */
-				devpriv->last_dma_run = bytes % devpriv->dmabytestomove[0];	/* on last dma transfer must be moved */
+				/*  how many samples we must transfer? */
+				bytes = devpriv->ai_n_chan *
+					devpriv->ai_scans * sizeof(short);
+
+				/*  how many DMA pages we must fill */
+				devpriv->dma_runs_to_end =
+					bytes / devpriv->dmabytestomove[0];
+
+				/* on last dma transfer must be moved */
+				devpriv->last_dma_run =
+					bytes % devpriv->dmabytestomove[0];
 				if (devpriv->dma_runs_to_end == 0)
 					devpriv->dmabytestomove[0] =
 					    devpriv->last_dma_run;
@@ -934,14 +970,13 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		break;
 	}
 
-	if (devpriv->ai_dma) {
-		outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);	/*  let's go! */
-	} else {
-		outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);	/*  let's go! */
-	}
+	if (devpriv->ai_dma)					/*  let's go! */
+		outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);
+	else							/*  let's go! */
+		outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);
 
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
 #endif
 
 	return 0;
@@ -983,7 +1018,8 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d)
 
 	if (err) {
 		printk
-		    ("comedi%d: pcl812: (%s at 0x%lx) A/D cmd IRQ without DRDY!\n",
+		    ("comedi%d: pcl812: (%s at 0x%lx) "
+		     "A/D cmd IRQ without DRDY!\n",
 		     dev->minor, dev->board_name, dev->iobase);
 		pcl812_ai_cancel(dev, s);
 		s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
@@ -1009,7 +1045,8 @@ static irqreturn_t interrupt_pcl812_ai_int(int irq, void *d)
 	if (next_chan == 0) {	/* one scan done */
 		devpriv->ai_act_scan++;
 		if (!(devpriv->ai_neverending))
-			if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/* all data sampled */
+							/* all data sampled */
+			if (devpriv->ai_act_scan >= devpriv->ai_scans) {
 				pcl812_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 			}
@@ -1030,14 +1067,16 @@ static void transfer_from_dma_buf(struct comedi_device *dev,
 
 	s->async->events = 0;
 	for (i = len; i; i--) {
-		comedi_buf_put(s->async, ptr[bufptr++]);	/*  get one sample */
+							/*  get one sample */
+		comedi_buf_put(s->async, ptr[bufptr++]);
 
 		s->async->cur_chan++;
 		if (s->async->cur_chan >= devpriv->ai_n_chan) {
 			s->async->cur_chan = 0;
 			devpriv->ai_act_scan++;
 			if (!devpriv->ai_neverending)
-				if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/* all data sampled */
+							/* all data sampled */
+				if (devpriv->ai_act_scan >= devpriv->ai_scans) {
 					pcl812_ai_cancel(dev, s);
 					s->async->events |= COMEDI_CB_EOA;
 					break;
@@ -1060,7 +1099,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
 	short *ptr;
 
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
 #endif
 	ptr = (short *)devpriv->dmabuf[devpriv->next_dma_buf];
 	len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
@@ -1095,7 +1134,7 @@ static irqreturn_t interrupt_pcl812_ai_dma(int irq, void *d)
 	transfer_from_dma_buf(dev, s, ptr, bufptr, len);
 
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
 #endif
 	return IRQ_HANDLED;
 }
@@ -1111,11 +1150,10 @@ static irqreturn_t interrupt_pcl812(int irq, void *d)
 		comedi_error(dev, "spurious interrupt");
 		return IRQ_HANDLED;
 	}
-	if (devpriv->ai_dma) {
+	if (devpriv->ai_dma)
 		return interrupt_pcl812_ai_dma(irq, d);
-	} else {
+	else
 		return interrupt_pcl812_ai_int(irq, d);
-	};
 }
 
 /*
@@ -1132,7 +1170,8 @@ static int pcl812_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 	spin_lock_irqsave(&dev->spinlock, flags);
 
 	for (i = 0; i < 10; i++) {
-		top1 = get_dma_residue(devpriv->ai_dma);	/*  where is now DMA */
+		/*  where is now DMA */
+		top1 = get_dma_residue(devpriv->ai_dma);
 		top2 = get_dma_residue(devpriv->ai_dma);
 		if (top1 == top2)
 			break;
@@ -1142,8 +1181,8 @@ static int pcl812_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 		spin_unlock_irqrestore(&dev->spinlock, flags);
 		return 0;
 	}
-
-	top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;	/*  where is now DMA in buffer */
+	/*  where is now DMA in buffer */
+	top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;
 	top1 >>= 1;		/*  sample position */
 	top2 = top1 - devpriv->ai_poll_ptr;
 	if (top2 < 1) {		/*  no new samples */
@@ -1171,7 +1210,9 @@ static void setup_range_channel(struct comedi_device *dev,
 				unsigned int rangechan, char wait)
 {
 	unsigned char chan_reg = CR_CHAN(rangechan);	/*  normal board */
-	unsigned char gain_reg = CR_RANGE(rangechan) + devpriv->range_correction;	/*  gain index */
+							/*  gain index */
+	unsigned char gain_reg = CR_RANGE(rangechan) +
+				 devpriv->range_correction;
 
 	if ((chan_reg == devpriv->old_chan_reg)
 	    && (gain_reg == devpriv->old_gain_reg))
@@ -1184,20 +1225,25 @@ static void setup_range_channel(struct comedi_device *dev,
 		if (devpriv->use_diff) {
 			chan_reg = chan_reg | 0x30;	/*  DIFF inputs */
 		} else {
-			if (chan_reg & 0x80) {
-				chan_reg = chan_reg | 0x20;	/*  SE inputs 8-15 */
-			} else {
-				chan_reg = chan_reg | 0x10;	/*  SE inputs 0-7 */
-			}
+			if (chan_reg & 0x80)
+							/*  SE inputs 8-15 */
+				chan_reg = chan_reg | 0x20;
+			else
+							/*  SE inputs 0-7 */
+				chan_reg = chan_reg | 0x10;
 		}
 	}
 
 	outb(chan_reg, dev->iobase + PCL812_MUX);	/* select channel */
 	outb(gain_reg, dev->iobase + PCL812_GAIN);	/* select gain */
 
-	if (wait) {
-		udelay(devpriv->max_812_ai_mode0_rangewait);	/*  XXX this depends on selected range and can be very long for some high gain ranges! */
-	}
+
+	if (wait)
+		/*
+		 * XXX this depends on selected range and can be very long for
+		 * some high gain ranges!
+		 */
+		udelay(devpriv->max_812_ai_mode0_rangewait);
 }
 
 /*
@@ -1207,8 +1253,8 @@ static void start_pacer(struct comedi_device *dev, int mode,
 			unsigned int divisor1, unsigned int divisor2)
 {
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
-	       divisor2);
+	printk(KERN_DEBUG "pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode,
+	       divisor1, divisor2);
 #endif
 	outb(0xb4, dev->iobase + PCL812_CTRCTL);
 	outb(0x74, dev->iobase + PCL812_CTRCTL);
@@ -1221,7 +1267,7 @@ static void start_pacer(struct comedi_device *dev, int mode,
 		outb((divisor1 >> 8) & 0xff, dev->iobase + PCL812_CTR1);
 	}
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: END: start_pacer(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: END: start_pacer(...)\n");
 #endif
 }
 
@@ -1252,16 +1298,17 @@ static int pcl812_ai_cancel(struct comedi_device *dev,
 			    struct comedi_subdevice *s)
 {
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
 #endif
 	if (devpriv->ai_dma)
 		disable_dma(devpriv->dma);
 	outb(0, dev->iobase + PCL812_CLRINT);	/* clear INT request */
-	outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);	/* Stop A/D */
+							/* Stop A/D */
+	outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
 	start_pacer(dev, -1, 0, 0);	/*  stop 8254 */
 	outb(0, dev->iobase + PCL812_CLRINT);	/* clear INT request */
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
 #endif
 	return 0;
 }
@@ -1272,7 +1319,7 @@ static int pcl812_ai_cancel(struct comedi_device *dev,
 static void pcl812_reset(struct comedi_device *dev)
 {
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_reset(...)\n");
 #endif
 	outb(0, dev->iobase + PCL812_MUX);
 	outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
@@ -1304,7 +1351,7 @@ static void pcl812_reset(struct comedi_device *dev)
 	}
 	udelay(5);
 #ifdef PCL812_EXTDEBUG
-	printk("pcl812 EDBG: END: pcl812_reset(...)\n");
+	printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_reset(...)\n");
 #endif
 }
 
@@ -1322,8 +1369,8 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	int n_subdevices;
 
 	iobase = it->options[0];
-	printk("comedi%d: pcl812:  board=%s, ioport=0x%03lx", dev->minor,
-	       this_board->name, iobase);
+	printk(KERN_INFO "comedi%d: pcl812:  board=%s, ioport=0x%03lx",
+	       dev->minor, this_board->name, iobase);
 
 	if (!request_region(iobase, this_board->io_range, "pcl812")) {
 		printk("I/O port conflict\n");
@@ -1345,18 +1392,18 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & this_board->IRQbits) == 0) {
 				printk
-				    (", IRQ %u is out of allowed range, DISABLING IT",
-				     irq);
+				    (", IRQ %u is out of allowed range, "
+				     "DISABLING IT", irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
 				if (request_irq
 				    (irq, interrupt_pcl812, 0, "pcl812", dev)) {
 					printk
-					    (", unable to allocate IRQ %u, DISABLING IT",
-					     irq);
+					    (", unable to allocate IRQ %u, "
+					     "DISABLING IT", irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					printk(", irq=%u", irq);
+					printk(KERN_INFO ", irq=%u", irq);
 				}
 			}
 		}
@@ -1376,16 +1423,20 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 		ret = request_dma(dma, "pcl812");
 		if (ret) {
-			printk(", unable to allocate DMA %u, FAIL!\n", dma);
+			printk(KERN_ERR ", unable to allocate DMA %u, FAIL!\n",
+			       dma);
 			return -EBUSY;	/* DMA isn't free */
 		}
 		devpriv->dma = dma;
-		printk(", dma=%u", dma);
+		printk(KERN_INFO ", dma=%u", dma);
 		pages = 1;	/* we want 8KB */
 		devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
 		if (!devpriv->dmabuf[0]) {
 			printk(", unable to allocate DMA buffer, FAIL!\n");
-			/* maybe experiment with try_to_free_pages() will help .... */
+			/*
+			 * maybe experiment with try_to_free_pages()
+			 * will help ....
+			 */
 			free_resources(dev);
 			return -EBUSY;	/* no buffer :-( */
 		}
@@ -1394,7 +1445,7 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		devpriv->hwdmasize[0] = PAGE_SIZE * (1 << pages);
 		devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
 		if (!devpriv->dmabuf[1]) {
-			printk(", unable to allocate DMA buffer, FAIL!\n");
+			printk(KERN_ERR ", unable to allocate DMA buffer, FAIL!\n");
 			free_resources(dev);
 			return -EBUSY;
 		}
@@ -1457,11 +1508,11 @@ no_dma:
 		s->maxdata = this_board->ai_maxdata;
 		s->len_chanlist = MAX_CHANLIST_LEN;
 		s->range_table = this_board->rangelist_ai;
-		if (this_board->board_type == boardACL8216) {
+		if (this_board->board_type == boardACL8216)
 			s->insn_read = acl8216_ai_insn_read;
-		} else {
+		else
 			s->insn_read = pcl812_ai_insn_read;
-		}
+
 		devpriv->use_MPC = this_board->haveMPC508;
 		s->cancel = pcl812_ai_cancel;
 		if (dev->irq) {
@@ -1500,8 +1551,8 @@ no_dma:
 				s->range_table = &range_bipolar10;
 				break;
 				printk
-				    (", incorrect range number %d, changing to 0 (+/-10V)",
-				     it->options[4]);
+				    (", incorrect range number %d, changing "
+				     "to 0 (+/-10V)", it->options[4]);
 				break;
 			}
 			break;
@@ -1530,8 +1581,8 @@ no_dma:
 				s->range_table = &range_iso813_1_ai;
 				break;
 				printk
-				    (", incorrect range number %d, changing to 0 ",
-				     it->options[1]);
+				    (", incorrect range number %d, "
+				     "changing to 0 ", it->options[1]);
 				break;
 			}
 			break;
@@ -1555,8 +1606,8 @@ no_dma:
 				s->range_table = &range_acl8113_1_ai;
 				break;
 				printk
-				    (", incorrect range number %d, changing to 0 ",
-				     it->options[1]);
+				    (", incorrect range number %d, "
+				     "changing to 0 ", it->options[1]);
 				break;
 			}
 			break;
@@ -1627,7 +1678,8 @@ no_dma:
 	case boardACL8112:
 		devpriv->max_812_ai_mode0_rangewait = 1;
 		if (it->options[3] > 0)
-			devpriv->use_ext_trg = 1;	/*  we use external trigger */
+						/*  we use external trigger */
+			devpriv->use_ext_trg = 1;
 	case boardA821:
 		devpriv->max_812_ai_mode0_rangewait = 1;
 		devpriv->mode_reg_int = (irq << 4) & 0xf0;
@@ -1636,11 +1688,12 @@ no_dma:
 	case boardPCL813:
 	case boardISO813:
 	case boardACL8113:
-		devpriv->max_812_ai_mode0_rangewait = 5;	/* maybe there must by greatest timeout */
+		/* maybe there must by greatest timeout */
+		devpriv->max_812_ai_mode0_rangewait = 5;
 		break;
 	}
 
-	printk("\n");
+	printk(KERN_INFO "\n");
 	devpriv->valid = 1;
 
 	pcl812_reset(dev);
@@ -1655,8 +1708,12 @@ static int pcl812_detach(struct comedi_device *dev)
 {
 
 #ifdef PCL812_EXTDEBUG
-	printk("comedi%d: pcl812: remove\n", dev->minor);
+	printk(KERN_DEBUG "comedi%d: pcl812: remove\n", dev->minor);
 #endif
 	free_resources(dev);
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 71c2a3aa379..3d0f018faa6 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -2,7 +2,7 @@
    comedi/drivers/pcl816.c
 
    Author:  Juan Grigera <juan@grigera.com.ar>
-            based on pcl818 by Michal Dobes <dobes@tesnet.cz> and bits of pcl812
+	    based on pcl818 by Michal Dobes <dobes@tesnet.cz> and bits of pcl812
 
    hardware driver for Advantech cards:
     card:   PCL-816, PCL814B
@@ -28,7 +28,7 @@ Configuration Options:
   [1] - IRQ	(0=disable, 2, 3, 4, 5, 6, 7)
   [2] - DMA	(0=disable, 1, 3)
   [3] - 0, 10=10MHz clock for 8254
-            1= 1MHz clock for 8254
+	    1= 1MHz clock for 8254
 
 */
 
@@ -85,7 +85,7 @@ Configuration Options:
 #define INT_TYPE_AI3_DMA_RTC 10
 
 /* RTC stuff... */
-#define RTC_IRQ 	8
+#define RTC_IRQ		8
 #define RTC_IO_EXTENT	0x10
 #endif
 
@@ -168,7 +168,18 @@ static struct comedi_driver driver_pcl816 = {
 	.offset = sizeof(struct pcl816_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl816);
+static int __init driver_pcl816_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl816);
+}
+
+static void __exit driver_pcl816_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl816);
+}
+
+module_init(driver_pcl816_init_module);
+module_exit(driver_pcl816_cleanup_module);
 
 struct pcl816_private {
 
@@ -253,7 +264,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
 
 	/*  Set the input channel */
 	outb(CR_CHAN(insn->chanspec) & 0xf, dev->iobase + PCL816_MUX);
-	outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE);	/* select gain */
+	/* select gain */
+	outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE);
 
 	for (n = 0; n < insn->n; n++) {
 
@@ -268,8 +280,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
 				    ((inb(dev->iobase +
 					  PCL816_AD_HI) << 8) |
 				     (inb(dev->iobase + PCL816_AD_LO)));
-
-				outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT (conversion end) flag */
+				/* clear INT (conversion end) flag */
+				outb(0, dev->iobase + PCL816_CLRINT);
 				break;
 			}
 			udelay(1);
@@ -278,7 +290,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
 		if (!timeout) {
 			comedi_error(dev, "A/D insn timeout\n");
 			data[0] = 0;
-			outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT (conversion end) flag */
+			/* clear INT (conversion end) flag */
+			outb(0, dev->iobase + PCL816_CLRINT);
 			return -EIO;
 		}
 
@@ -332,7 +345,8 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
 	}
 
 	if (!devpriv->ai_neverending)
-		if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/* all data sampled */
+					/* all data sampled */
+		if (devpriv->ai_act_scan >= devpriv->ai_scans) {
 			/* all data sampled */
 			pcl816_ai_cancel(dev, s);
 			s->async->events |= COMEDI_CB_EOA;
@@ -369,7 +383,8 @@ static void transfer_from_dma_buf(struct comedi_device *dev,
 		}
 
 		if (!devpriv->ai_neverending)
-			if (devpriv->ai_act_scan >= devpriv->ai_scans) {	/*  all data sampled */
+						/*  all data sampled */
+			if (devpriv->ai_act_scan >= devpriv->ai_scans) {
 				pcl816_ai_cancel(dev, s);
 				s->async->events |= COMEDI_CB_EOA;
 				s->async->events |= COMEDI_CB_BLOCK;
@@ -391,7 +406,8 @@ static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
 	disable_dma(devpriv->dma);
 	this_dma_buf = devpriv->next_dma_buf;
 
-	if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) {	/*  switch dma bufs */
+	/*  switch dma bufs */
+	if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) {
 
 		devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
 		set_dma_mode(devpriv->dma, DMA_MODE_READ);
@@ -467,14 +483,14 @@ static irqreturn_t interrupt_pcl816(int irq, void *d)
 */
 static void pcl816_cmdtest_out(int e, struct comedi_cmd *cmd)
 {
-	printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+	printk(KERN_INFO "pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
 	       cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
-	printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+	printk(KERN_INFO "pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
 	       cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
-	printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
-	       cmd->scan_end_src);
-	printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
-	       cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
+	printk(KERN_INFO "pcl816 e=%d stopsrc=%x scanend=%x\n", e,
+	       cmd->stop_src, cmd->scan_end_src);
+	printk(KERN_INFO "pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
+	       e, cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
 }
 
 /*
@@ -486,8 +502,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
 	int err = 0;
 	int tmp, divisor1 = 0, divisor2 = 0;
 
-	DEBUG(printk("pcl816 pcl812_ai_cmdtest\n"); pcl816_cmdtest_out(-1, cmd);
-	    );
+	DEBUG(printk(KERN_INFO "pcl816 pcl812_ai_cmdtest\n");
+	      pcl816_cmdtest_out(-1, cmd);
+	     );
 
 	/* step 1: make sure trigger sources are trivially valid */
 	tmp = cmd->start_src;
@@ -515,11 +532,14 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
 	if (!cmd->stop_src || tmp != cmd->stop_src)
 		err++;
 
-	if (err) {
+	if (err)
 		return 1;
-	}
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+
+	/*
+	 * step 2: make sure trigger sources
+	 * are unique and mutually compatible
+	 */
 
 	if (cmd->start_src != TRIG_NOW) {
 		cmd->start_src = TRIG_NOW;
@@ -544,9 +564,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
 	if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
 		err++;
 
-	if (err) {
+	if (err)
 		return 2;
-	}
+
 
 	/* step 3: make sure arguments are trivially compatible */
 	if (cmd->start_arg != 0) {
@@ -586,9 +606,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
 		}
 	}
 
-	if (err) {
+	if (err)
 		return 3;
-	}
+
 
 	/* step 4: fix up any arguments */
 	if (cmd->convert_src == TRIG_TIMER) {
@@ -603,9 +623,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
 			err++;
 	}
 
-	if (err) {
+	if (err)
 		return 4;
-	}
+
 
 	/* step 5: complain about special chanlist considerations */
 
@@ -643,7 +663,9 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
 					  &divisor2, &cmd->convert_arg,
 					  cmd->flags & TRIG_ROUND_MASK);
-		if (divisor1 == 1) {	/*  PCL816 crash if any divisor is set to 1 */
+
+		/*  PCL816 crash if any divisor is set to 1 */
+		if (divisor1 == 1) {
 			divisor1 = 2;
 			divisor2 /= 2;
 		}
@@ -676,8 +698,10 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		devpriv->ai_neverending = 1;
 	}
 
-	if ((cmd->flags & TRIG_WAKE_EOS)) {	/*  don't we want wake up every scan? */
-		printk("pl816: You wankt WAKE_EOS but I dont want handle it");
+	/*  don't we want wake up every scan? */
+	if ((cmd->flags & TRIG_WAKE_EOS)) {
+		printk(KERN_INFO
+		       "pl816: You wankt WAKE_EOS but I dont want handle it");
 		/*               devpriv->ai_eos=1; */
 		/* if (devpriv->ai_n_chan==1) */
 		/*       devpriv->dma=0; // DMA is useless for this situation */
@@ -686,9 +710,17 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	if (devpriv->dma) {
 		bytes = devpriv->hwdmasize[0];
 		if (!devpriv->ai_neverending) {
-			bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short);	/*  how many */
-			devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];	/*  how many DMA pages we must fill */
-			devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];	/* on last dma transfer must be moved */
+			/*  how many */
+			bytes = s->async->cmd.chanlist_len *
+			s->async->cmd.chanlist_len *
+			sizeof(short);
+
+			/*  how many DMA pages we must fill */
+			devpriv->dma_runs_to_end = bytes /
+			devpriv->hwdmasize[0];
+
+			/* on last dma transfer must be moved */
+			devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];
 			devpriv->dma_runs_to_end--;
 			if (devpriv->dma_runs_to_end >= 0)
 				bytes = devpriv->hwdmasize[0];
@@ -711,14 +743,22 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	switch (cmd->convert_src) {
 	case TRIG_TIMER:
 		devpriv->int816_mode = INT_TYPE_AI1_DMA;
-		outb(0x32, dev->iobase + PCL816_CONTROL);	/*  Pacer+IRQ+DMA */
-		outb(dmairq, dev->iobase + PCL816_STATUS);	/*  write irq and DMA to card */
+
+		/*  Pacer+IRQ+DMA */
+		outb(0x32, dev->iobase + PCL816_CONTROL);
+
+		/*  write irq and DMA to card */
+		outb(dmairq, dev->iobase + PCL816_STATUS);
 		break;
 
 	default:
 		devpriv->int816_mode = INT_TYPE_AI3_DMA;
-		outb(0x34, dev->iobase + PCL816_CONTROL);	/*  Ext trig+IRQ+DMA */
-		outb(dmairq, dev->iobase + PCL816_STATUS);	/*  write irq to card */
+
+		/*  Ext trig+IRQ+DMA */
+		outb(0x34, dev->iobase + PCL816_CONTROL);
+
+		/*  write irq to card */
+		outb(dmairq, dev->iobase + PCL816_STATUS);
 		break;
 	}
 
@@ -747,7 +787,8 @@ static int pcl816_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
 		return 0;
 	}
 
-	top1 = devpriv->hwdmasize[0] - top1;	/*  where is now DMA in buffer */
+	/*  where is now DMA in buffer */
+	top1 = devpriv->hwdmasize[0] - top1;
 	top1 >>= 1;		/*  sample position */
 	top2 = top1 - devpriv->ai_poll_ptr;
 	if (top2 < 1) {		/*  no new samples */
@@ -787,16 +828,23 @@ static int pcl816_ai_cancel(struct comedi_device *dev,
 			disable_dma(devpriv->dma);
 		case INT_TYPE_AI1_INT:
 		case INT_TYPE_AI3_INT:
-			outb(inb(dev->iobase + PCL816_CONTROL) & 0x73, dev->iobase + PCL816_CONTROL);	/* Stop A/D */
+			outb(inb(dev->iobase + PCL816_CONTROL) & 0x73,
+			     dev->iobase + PCL816_CONTROL);	/* Stop A/D */
 			udelay(1);
 			outb(0, dev->iobase + PCL816_CONTROL);	/* Stop A/D */
-			outb(0xb0, dev->iobase + PCL816_CTRCTL);	/* Stop pacer */
+
+			/* Stop pacer */
+			outb(0xb0, dev->iobase + PCL816_CTRCTL);
 			outb(0x70, dev->iobase + PCL816_CTRCTL);
 			outb(0, dev->iobase + PCL816_AD_LO);
 			inb(dev->iobase + PCL816_AD_LO);
 			inb(dev->iobase + PCL816_AD_HI);
-			outb(0, dev->iobase + PCL816_CLRINT);	/* clear INT request */
-			outb(0, dev->iobase + PCL816_CONTROL);	/* Stop A/D */
+
+			/* clear INT request */
+			outb(0, dev->iobase + PCL816_CLRINT);
+
+			/* Stop A/D */
+			outb(0, dev->iobase + PCL816_CONTROL);
 			devpriv->irq_blocked = 0;
 			devpriv->irq_was_now_closed = devpriv->int816_mode;
 			devpriv->int816_mode = 0;
@@ -866,8 +914,11 @@ start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
 	outb(0xff, dev->iobase + PCL816_CTR0);
 	outb(0x00, dev->iobase + PCL816_CTR0);
 	udelay(1);
-	outb(0xb4, dev->iobase + PCL816_CTRCTL);	/*  set counter 2 as mode 3 */
-	outb(0x74, dev->iobase + PCL816_CTRCTL);	/*  set counter 1 as mode 3 */
+
+	/*  set counter 2 as mode 3 */
+	outb(0xb4, dev->iobase + PCL816_CTRCTL);
+	/*  set counter 1 as mode 3 */
+	outb(0x74, dev->iobase + PCL816_CTRCTL);
 	udelay(1);
 
 	if (mode == 1) {
@@ -903,41 +954,51 @@ check_channel_list(struct comedi_device *dev,
 	}
 
 	if (chanlen > 1) {
-		chansegment[0] = chanlist[0];	/*  first channel is everytime ok */
+		/*  first channel is everytime ok */
+		chansegment[0] = chanlist[0];
 		for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
 			/*  build part of chanlist */
-			DEBUG(printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
+			DEBUG(printk(KERN_INFO "%d. %d %d\n", i,
+				     CR_CHAN(chanlist[i]),
 				     CR_RANGE(chanlist[i]));)
+
+			/*  we detect loop, this must by finish */
 			    if (chanlist[0] == chanlist[i])
-				break;	/*  we detect loop, this must by finish */
+				break;
 			nowmustbechan =
 			    (CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
 			if (nowmustbechan != CR_CHAN(chanlist[i])) {
 				/*  channel list isn't continous :-( */
-				printk
-				    ("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
-				     dev->minor, i, CR_CHAN(chanlist[i]),
-				     nowmustbechan, CR_CHAN(chanlist[0]));
+				printk(KERN_WARNING
+				       "comedi%d: pcl816: channel list must "
+				       "be continous! chanlist[%i]=%d but "
+				       "must be %d or %d!\n", dev->minor,
+				       i, CR_CHAN(chanlist[i]), nowmustbechan,
+				       CR_CHAN(chanlist[0]));
 				return 0;
 			}
-			chansegment[i] = chanlist[i];	/*  well, this is next correct channel in list */
+			/*  well, this is next correct channel in list */
+			chansegment[i] = chanlist[i];
 		}
 
-		for (i = 0, segpos = 0; i < chanlen; i++) {	/*  check whole chanlist */
+		/*  check whole chanlist */
+		for (i = 0, segpos = 0; i < chanlen; i++) {
 			DEBUG(printk("%d %d=%d %d\n",
 				     CR_CHAN(chansegment[i % seglen]),
 				     CR_RANGE(chansegment[i % seglen]),
 				     CR_CHAN(chanlist[i]),
 				     CR_RANGE(chanlist[i]));)
 			    if (chanlist[i] != chansegment[i % seglen]) {
-				printk
-				    ("comedi%d: pcl816: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
-				     dev->minor, i, CR_CHAN(chansegment[i]),
-				     CR_RANGE(chansegment[i]),
-				     CR_AREF(chansegment[i]),
-				     CR_CHAN(chanlist[i % seglen]),
-				     CR_RANGE(chanlist[i % seglen]),
-				     CR_AREF(chansegment[i % seglen]));
+				printk(KERN_WARNING
+				       "comedi%d: pcl816: bad channel or range"
+				       " number! chanlist[%i]=%d,%d,%d and not"
+				       " %d,%d,%d!\n", dev->minor, i,
+				       CR_CHAN(chansegment[i]),
+				       CR_RANGE(chansegment[i]),
+				       CR_AREF(chansegment[i]),
+				       CR_CHAN(chanlist[i % seglen]),
+				       CR_RANGE(chanlist[i % seglen]),
+				       CR_AREF(chansegment[i % seglen]));
 				return 0;	/*  chan/gain list is strange */
 			}
 		}
@@ -965,12 +1026,15 @@ setup_channel_list(struct comedi_device *dev,
 	for (i = 0; i < seglen; i++) {	/*  store range list to card */
 		devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
 		outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
-		outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE);	/* select gain */
+		/* select gain */
+		outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE);
 	}
 
 	udelay(1);
-
-	outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX);	/* select channel interval to scan */
+	/* select channel interval to scan */
+	outb(devpriv->ai_act_chanlist[0] |
+	     (devpriv->ai_act_chanlist[seglen - 1] << 4),
+	     dev->iobase + PCL816_MUX);
 }
 
 #ifdef unused
@@ -998,11 +1062,11 @@ static int set_rtc_irq_bit(unsigned char bit)
 	save_flags(flags);
 	cli();
 	val = CMOS_READ(RTC_CONTROL);
-	if (bit) {
+	if (bit)
 		val |= RTC_PIE;
-	} else {
+	else
 		val &= ~RTC_PIE;
-	}
+
 	CMOS_WRITE(val, RTC_CONTROL);
 	CMOS_READ(RTC_INTR_FLAGS);
 	restore_flags(flags);
@@ -1072,7 +1136,7 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	dev->iobase = iobase;
 
 	if (pcl816_check(iobase)) {
-		printk(", I cann't detect board. FAIL!\n");
+		printk(KERN_ERR ", I cann't detect board. FAIL!\n");
 		return -EIO;
 	}
 
@@ -1090,30 +1154,29 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		if (irq) {	/* we want to use IRQ */
 			if (((1 << irq) & this_board->IRQbits) == 0) {
 				printk
-				    (", IRQ %u is out of allowed range, DISABLING IT",
-				     irq);
+				    (", IRQ %u is out of allowed range, "
+				     "DISABLING IT", irq);
 				irq = 0;	/* Bad IRQ */
 			} else {
 				if (request_irq
 				    (irq, interrupt_pcl816, 0, "pcl816", dev)) {
 					printk
-					    (", unable to allocate IRQ %u, DISABLING IT",
-					     irq);
+					    (", unable to allocate IRQ %u, "
+					     "DISABLING IT", irq);
 					irq = 0;	/* Can't use IRQ */
 				} else {
-					printk(", irq=%u", irq);
+					printk(KERN_INFO ", irq=%u", irq);
 				}
 			}
 		}
 	}
 
 	dev->irq = irq;
-	if (irq) {
+	if (irq)	/* 1=we have allocated irq */
 		devpriv->irq_free = 1;
-	} /* 1=we have allocated irq */
-	else {
+	else
 		devpriv->irq_free = 0;
-	}
+
 	devpriv->irq_blocked = 0;	/* number of subdevice which use IRQ */
 	devpriv->int816_mode = 0;	/* mode of irq */
 
@@ -1170,18 +1233,22 @@ no_rtc:
 		}
 		ret = request_dma(dma, "pcl816");
 		if (ret) {
-			printk(", unable to allocate DMA %u, FAIL!\n", dma);
+			printk(KERN_ERR
+			       ", unable to allocate DMA %u, FAIL!\n", dma);
 			return -EBUSY;	/* DMA isn't free */
 		}
 
 		devpriv->dma = dma;
-		printk(", dma=%u", dma);
+		printk(KERN_INFO ", dma=%u", dma);
 		pages = 2;	/* we need 16KB */
 		devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
 
 		if (!devpriv->dmabuf[0]) {
 			printk(", unable to allocate DMA buffer, FAIL!\n");
-			/* maybe experiment with try_to_free_pages() will help .... */
+			/*
+			 * maybe experiment with try_to_free_pages()
+			 * will help ....
+			 */
 			return -EBUSY;	/* no buffer :-( */
 		}
 		devpriv->dmapages[0] = pages;
@@ -1192,8 +1259,9 @@ no_rtc:
 		if (devpriv->dma_rtc == 0) {	/*  we must do duble buff :-( */
 			devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
 			if (!devpriv->dmabuf[1]) {
-				printk
-				    (", unable to allocate DMA buffer, FAIL!\n");
+				printk(KERN_ERR
+				       ", unable to allocate DMA buffer, "
+				       "FAIL!\n");
 				return -EBUSY;
 			}
 			devpriv->dmapages[1] = pages;
@@ -1277,7 +1345,7 @@ case COMEDI_SUBD_DO:
  */
 static int pcl816_detach(struct comedi_device *dev)
 {
-	DEBUG(printk("comedi%d: pcl816: remove\n", dev->minor);)
+	DEBUG(printk(KERN_INFO "comedi%d: pcl816: remove\n", dev->minor);)
 	    free_resources(dev);
 #ifdef unused
 	if (devpriv->dma_rtc)
@@ -1285,3 +1353,7 @@ static int pcl816_detach(struct comedi_device *dev)
 #endif
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index 9d6aa393ef1..d2bd6f82b83 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -313,7 +313,18 @@ static struct comedi_driver driver_pcl818 = {
 	.offset = sizeof(struct pcl818_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcl818);
+static int __init driver_pcl818_init_module(void)
+{
+	return comedi_driver_register(&driver_pcl818);
+}
+
+static void __exit driver_pcl818_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcl818);
+}
+
+module_init(driver_pcl818_init_module);
+module_exit(driver_pcl818_cleanup_module);
 
 struct pcl818_private {
 
@@ -2036,3 +2047,7 @@ static int pcl818_detach(struct comedi_device *dev)
 	free_resources(dev);
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3724.c b/drivers/staging/comedi/drivers/pcm3724.c
index ed610307923..7fb3c27e597 100644
--- a/drivers/staging/comedi/drivers/pcm3724.c
+++ b/drivers/staging/comedi/drivers/pcm3724.c
@@ -97,7 +97,18 @@ static struct comedi_driver driver_pcm3724 = {
 	.offset = sizeof(struct pcm3724_board),
 };
 
-COMEDI_INITCLEANUP(driver_pcm3724);
+static int __init driver_pcm3724_init_module(void)
+{
+	return comedi_driver_register(&driver_pcm3724);
+}
+
+static void __exit driver_pcm3724_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcm3724);
+}
+
+module_init(driver_pcm3724_init_module);
+module_exit(driver_pcm3724_cleanup_module);
 
 /* (setq c-basic-offset 8) */
 
@@ -184,7 +195,7 @@ static void enable_chan(struct comedi_device *dev, struct comedi_subdevice *s,
 	struct priv_pcm3724 *priv;
 
 	gatecfg = 0;
-	priv = (struct priv_pcm3724 *)(dev->private);
+	priv = dev->private;
 
 	mask = 1 << CR_CHAN(chanspec);
 	if (s == dev->subdevices)	/*  subdev 0 */
@@ -307,3 +318,7 @@ static int pcm3724_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm3730.c b/drivers/staging/comedi/drivers/pcm3730.c
index 22b7aae63ad..bada6b236ff 100644
--- a/drivers/staging/comedi/drivers/pcm3730.c
+++ b/drivers/staging/comedi/drivers/pcm3730.c
@@ -38,7 +38,18 @@ static struct comedi_driver driver_pcm3730 = {
 	.detach = pcm3730_detach,
 };
 
-COMEDI_INITCLEANUP(driver_pcm3730);
+static int __init driver_pcm3730_init_module(void)
+{
+	return comedi_driver_register(&driver_pcm3730);
+}
+
+static void __exit driver_pcm3730_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcm3730);
+}
+
+module_init(driver_pcm3730_init_module);
+module_exit(driver_pcm3730_cleanup_module);
 
 static int pcm3730_do_insn_bits(struct comedi_device *dev,
 				struct comedi_subdevice *s,
@@ -154,3 +165,7 @@ static int pcm3730_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcm_common.c b/drivers/staging/comedi/drivers/pcm_common.c
index 52c2a669821..474af7bc6c8 100644
--- a/drivers/staging/comedi/drivers/pcm_common.c
+++ b/drivers/staging/comedi/drivers/pcm_common.c
@@ -109,3 +109,7 @@ int comedi_pcm_cmdtest(struct comedi_device *dev,
 	return 0;
 }
 EXPORT_SYMBOL(comedi_pcm_cmdtest);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmad.c b/drivers/staging/comedi/drivers/pcmad.c
index fab8092bd7a..23b3d777340 100644
--- a/drivers/staging/comedi/drivers/pcmad.c
+++ b/drivers/staging/comedi/drivers/pcmad.c
@@ -89,7 +89,18 @@ static struct comedi_driver driver_pcmad = {
 	.offset = sizeof(pcmad_boards[0]),
 };
 
-COMEDI_INITCLEANUP(driver_pcmad);
+static int __init driver_pcmad_init_module(void)
+{
+	return comedi_driver_register(&driver_pcmad);
+}
+
+static void __exit driver_pcmad_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_pcmad);
+}
+
+module_init(driver_pcmad_init_module);
+module_exit(driver_pcmad_cleanup_module);
 
 #define TIMEOUT	100
 
@@ -176,3 +187,7 @@ static int pcmad_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 7133eb0352b..0e9ffa28d74 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -157,7 +157,8 @@ static int pcmda12_attach(struct comedi_device *dev,
 	unsigned long iobase;
 
 	iobase = it->options[0];
-	printk("comedi%d: %s: io: %lx %s ", dev->minor, driver.driver_name,
+	printk(KERN_INFO
+	       "comedi%d: %s: io: %lx %s ", dev->minor, driver.driver_name,
 	       iobase, it->options[1] ? "simultaneous xfer mode enabled" : "");
 
 	if (!request_region(iobase, IOSIZE, driver.driver_name)) {
@@ -177,7 +178,7 @@ static int pcmda12_attach(struct comedi_device *dev,
  * convenient macro defined in comedidev.h.
  */
 	if (alloc_private(dev, sizeof(struct pcmda12_private)) < 0) {
-		printk("cannot allocate private data structure\n");
+		printk(KERN_ERR "cannot allocate private data structure\n");
 		return -ENOMEM;
 	}
 
@@ -191,7 +192,7 @@ static int pcmda12_attach(struct comedi_device *dev,
 	 * 96-channel version of the board.
 	 */
 	if (alloc_subdevices(dev, 1) < 0) {
-		printk("cannot allocate subdevice data structures\n");
+		printk(KERN_ERR "cannot allocate subdevice data structures\n");
 		return -ENOMEM;
 	}
 
@@ -207,7 +208,7 @@ static int pcmda12_attach(struct comedi_device *dev,
 
 	zero_chans(dev);	/* clear out all the registers, basically */
 
-	printk("attached\n");
+	printk(KERN_INFO "attached\n");
 
 	return 1;
 }
@@ -222,7 +223,8 @@ static int pcmda12_attach(struct comedi_device *dev,
  */
 static int pcmda12_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: %s: remove\n", dev->minor, driver.driver_name);
+	printk(KERN_INFO
+	       "comedi%d: %s: remove\n", dev->minor, driver.driver_name);
 	if (dev->iobase)
 		release_region(dev->iobase, IOSIZE);
 	return 0;
@@ -303,4 +305,19 @@ static int ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver);
+static int __init driver_init_module(void)
+{
+	return comedi_driver_register(&driver);
+}
+
+static void __exit driver_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver);
+}
+
+module_init(driver_init_module);
+module_exit(driver_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 025a52e8981..5c832d7ed45 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -145,10 +145,6 @@ Configuration Options:
 #define PAGE_ENAB 2
 #define PAGE_INT_ID 3
 
-typedef int (*comedi_insn_fn_t) (struct comedi_device *,
-				 struct comedi_subdevice *,
-				 struct comedi_insn *, unsigned int *);
-
 static int ai_rinsn(struct comedi_device *, struct comedi_subdevice *,
 		    struct comedi_insn *, unsigned int *);
 static int ao_rinsn(struct comedi_device *, struct comedi_subdevice *,
@@ -171,7 +167,18 @@ struct pcmmio_board {
 	const int n_ai_chans;
 	const int n_ao_chans;
 	const struct comedi_lrange *ai_range_table, *ao_range_table;
-	comedi_insn_fn_t ai_rinsn, ao_rinsn, ao_winsn;
+	int (*ai_rinsn) (struct comedi_device *dev,
+			struct comedi_subdevice *s,
+			struct comedi_insn *insn,
+			unsigned int *data);
+	int (*ao_rinsn) (struct comedi_device *dev,
+			struct comedi_subdevice *s,
+			struct comedi_insn *insn,
+			unsigned int *data);
+	int (*ao_winsn) (struct comedi_device *dev,
+			struct comedi_subdevice *s,
+			struct comedi_insn *insn,
+			unsigned int *data);
 };
 
 static const struct comedi_lrange ranges_ai = {
@@ -1333,4 +1340,19 @@ static int ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver);
+static int __init driver_init_module(void)
+{
+	return comedi_driver_register(&driver);
+}
+
+static void __exit driver_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver);
+}
+
+module_init(driver_init_module);
+module_exit(driver_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 5af4c8448a3..7a9287433b2 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -1018,4 +1018,19 @@ pcmuio_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver);
+static int __init driver_init_module(void)
+{
+	return comedi_driver_register(&driver);
+}
+
+static void __exit driver_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver);
+}
+
+module_init(driver_init_module);
+module_exit(driver_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/poc.c b/drivers/staging/comedi/drivers/poc.c
index 1ebc356ce40..831a576c24a 100644
--- a/drivers/staging/comedi/drivers/poc.c
+++ b/drivers/staging/comedi/drivers/poc.c
@@ -248,4 +248,19 @@ static int pcl734_insn_bits(struct comedi_device *dev,
 	return 2;
 }
 
-COMEDI_INITCLEANUP(driver_poc);
+static int __init driver_poc_init_module(void)
+{
+	return comedi_driver_register(&driver_poc);
+}
+
+static void __exit driver_poc_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_poc);
+}
+
+module_init(driver_poc_init_module);
+module_exit(driver_poc_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index a91db6c4202..bf489d7f499 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -14,7 +14,7 @@
 
     Documentation for the DAQP PCMCIA cards can be found on Quatech's site:
 
-                ftp://ftp.quatech.com/Manuals/daqp-208.pdf
+		ftp://ftp.quatech.com/Manuals/daqp-208.pdf
 
     This manual is for both the DAQP-208 and the DAQP-308.
 
@@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308
 #include "../comedidev.h"
 #include <linux/semaphore.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -195,7 +194,7 @@ static struct comedi_driver driver_daqp = {
 
 static void daqp_dump(struct comedi_device *dev)
 {
-	printk("DAQP: status %02x; aux status %02x\n",
+	printk(KERN_INFO "DAQP: status %02x; aux status %02x\n",
 	       inb(dev->iobase + DAQP_STATUS), inb(dev->iobase + DAQP_AUX));
 }
 
@@ -207,9 +206,9 @@ static void hex_dump(char *str, void *ptr, int len)
 	printk(str);
 
 	for (i = 0; i < len; i++) {
-		if (i % 16 == 0) {
-			printk("\n0x%08x:", (unsigned int)cptr);
-		}
+		if (i % 16 == 0)
+			printk("\n%p:", cptr);
+
 		printk(" %02x", *(cptr++));
 	}
 	printk("\n");
@@ -223,9 +222,9 @@ static int daqp_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
 	struct local_info_t *local = (struct local_info_t *)s->private;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
+
 
 	outb(DAQP_COMMAND_STOP, dev->iobase + DAQP_COMMAND);
 
@@ -355,9 +354,9 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
 	int v;
 	int counter = 10000;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
+
 
 	/* Stop any running conversion */
 	daqp_ai_cancel(dev, s);
@@ -372,9 +371,9 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
 	v = DAQP_SCANLIST_CHANNEL(CR_CHAN(insn->chanspec))
 	    | DAQP_SCANLIST_GAIN(CR_RANGE(insn->chanspec));
 
-	if (CR_AREF(insn->chanspec) == AREF_DIFF) {
+	if (CR_AREF(insn->chanspec) == AREF_DIFF)
 		v |= DAQP_SCANLIST_DIFFERENTIAL;
-	}
+
 
 	v |= DAQP_SCANLIST_START;
 
@@ -488,7 +487,10 @@ static int daqp_ai_cmdtest(struct comedi_device *dev,
 	if (err)
 		return 1;
 
-	/* step 2: make sure trigger sources are unique and mutually compatible */
+	/*
+	 * step 2: make sure trigger sources
+	 * are unique and mutually compatible
+	 */
 
 	/* note that mutual compatibility is not an issue here */
 	if (cmd->scan_begin_src != TRIG_TIMER &&
@@ -588,9 +590,9 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	int i;
 	int v;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
+
 
 	/* Stop any running conversion */
 	daqp_ai_cancel(dev, s);
@@ -640,13 +642,11 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		v = DAQP_SCANLIST_CHANNEL(CR_CHAN(chanspec))
 		    | DAQP_SCANLIST_GAIN(CR_RANGE(chanspec));
 
-		if (CR_AREF(chanspec) == AREF_DIFF) {
+		if (CR_AREF(chanspec) == AREF_DIFF)
 			v |= DAQP_SCANLIST_DIFFERENTIAL;
-		}
 
-		if (i == 0 || scanlist_start_on_every_entry) {
+		if (i == 0 || scanlist_start_on_every_entry)
 			v |= DAQP_SCANLIST_START;
-		}
 
 		outb(v & 0xff, dev->iobase + DAQP_SCANLIST);
 		outb(v >> 8, dev->iobase + DAQP_SCANLIST);
@@ -760,7 +760,8 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	while (--counter
 	       && (inb(dev->iobase + DAQP_STATUS) & DAQP_STATUS_EVENTS)) ;
 	if (!counter) {
-		printk("daqp: couldn't clear interrupts in status register\n");
+		printk(KERN_ERR
+		       "daqp: couldn't clear interrupts in status register\n");
 		return -1;
 	}
 
@@ -785,9 +786,8 @@ static int daqp_ao_insn_write(struct comedi_device *dev,
 	int d;
 	unsigned int chan;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
 
 	chan = CR_CHAN(insn->chanspec);
 	d = data[0];
@@ -811,9 +811,8 @@ static int daqp_di_insn_read(struct comedi_device *dev,
 {
 	struct local_info_t *local = (struct local_info_t *)s->private;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
 
 	data[0] = inb(dev->iobase + DAQP_DIGITAL_IO);
 
@@ -828,9 +827,8 @@ static int daqp_do_insn_write(struct comedi_device *dev,
 {
 	struct local_info_t *local = (struct local_info_t *)s->private;
 
-	if (local->stop) {
+	if (local->stop)
 		return -EIO;
-	}
 
 	outw(data[0] & 0xf, dev->iobase + DAQP_DIGITAL_IO);
 
@@ -872,13 +870,13 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		}
 	}
 
-	dev->iobase = local->link->io.BasePort1;
+	dev->iobase = local->link->resource[0]->start;
 
 	ret = alloc_subdevices(dev, 4);
 	if (ret < 0)
 		return ret;
 
-	printk("comedi%d: attaching daqp%d (io 0x%04lx)\n",
+	printk(KERN_INFO "comedi%d: attaching daqp%d (io 0x%04lx)\n",
 	       dev->minor, it->options[0], dev->iobase);
 
 	s = dev->subdevices + 0;
@@ -931,7 +929,7 @@ static int daqp_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 static int daqp_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: detaching daqp\n", dev->minor);
+	printk(KERN_INFO "comedi%d: detaching daqp\n", dev->minor);
 
 	return 0;
 }
@@ -996,14 +994,6 @@ static int daqp_cs_resume(struct pcmcia_device *p_dev);
 static int daqp_cs_attach(struct pcmcia_device *);
 static void daqp_cs_detach(struct pcmcia_device *);
 
-/*
-   The dev_info variable is the "key" that is used to match up this
-   device driver with appropriate cards, through the card configuration
-   database.
-*/
-
-static const dev_info_t dev_info = "quatech_daqp_cs";
-
 /*======================================================================
 
     daqp_cs_attach() creates an "instance" of the driver, allocating
@@ -1076,8 +1066,7 @@ static void daqp_cs_detach(struct pcmcia_device *link)
 
 	/* Unlink device structure, and free it */
 	dev_table[dev->table_index] = NULL;
-	if (dev)
-		kfree(dev);
+	kfree(dev);
 
 }				/* daqp_cs_detach */
 
@@ -1103,26 +1092,24 @@ static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-		if (!(io->flags & CISTPL_IO_8BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		p_dev->resource[0]->flags |=
+			pcmcia_io_cfg_data_width(io->flags);
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 		if (io->nwin > 1) {
-			p_dev->io.Attributes2 = p_dev->io.Attributes1;
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
 	}
 
 	/* This reserves IO space but doesn't actually enable it */
-	return pcmcia_request_io(p_dev, &p_dev->io);
+	return pcmcia_request_io(p_dev);
 }
 
 static void daqp_cs_config(struct pcmcia_device *link)
@@ -1154,12 +1141,10 @@ static void daqp_cs_config(struct pcmcia_device *link)
 	dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %u", link->irq);
-	if (link->io.NumPorts1)
-		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-		       link->io.BasePort1 + link->io.NumPorts1 - 1);
-	if (link->io.NumPorts2)
-		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
-		       link->io.BasePort2 + link->io.NumPorts2 - 1);
+	if (link->resource[0])
+		printk(" & %pR", link->resource[0]);
+	if (link->resource[1])
+		printk(" & %pR", link->resource[1]);
 	printk("\n");
 
 	return;
@@ -1228,7 +1213,7 @@ static struct pcmcia_driver daqp_cs_driver = {
 	.id_table = daqp_cs_id_table,
 	.owner = THIS_MODULE,
 	.drv = {
-		.name = dev_info,
+		.name = "quatech_daqp_cs",
 		},
 };
 
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 8626658e778..0367d2b9e2f 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -2356,4 +2356,44 @@ static int rtd_dio_insn_config(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_PCI_INITCLEANUP(rtd520Driver, rtd520_pci_table);
+static int __devinit rtd520Driver_pci_probe(struct pci_dev *dev,
+					    const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, rtd520Driver.driver_name);
+}
+
+static void __devexit rtd520Driver_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver rtd520Driver_pci_driver = {
+	.id_table = rtd520_pci_table,
+	.probe = &rtd520Driver_pci_probe,
+	.remove = __devexit_p(&rtd520Driver_pci_remove)
+};
+
+static int __init rtd520Driver_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&rtd520Driver);
+	if (retval < 0)
+		return retval;
+
+	rtd520Driver_pci_driver.name = (char *)rtd520Driver.driver_name;
+	return pci_register_driver(&rtd520Driver_pci_driver);
+}
+
+static void __exit rtd520Driver_cleanup_module(void)
+{
+	pci_unregister_driver(&rtd520Driver_pci_driver);
+	comedi_driver_unregister(&rtd520Driver);
+}
+
+module_init(rtd520Driver_init_module);
+module_exit(rtd520Driver_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/rti800.c b/drivers/staging/comedi/drivers/rti800.c
index 028ed6f89c4..72042b81831 100644
--- a/drivers/staging/comedi/drivers/rti800.c
+++ b/drivers/staging/comedi/drivers/rti800.c
@@ -158,7 +158,18 @@ static struct comedi_driver driver_rti800 = {
 	.offset = sizeof(struct rti800_board),
 };
 
-COMEDI_INITCLEANUP(driver_rti800);
+static int __init driver_rti800_init_module(void)
+{
+	return comedi_driver_register(&driver_rti800);
+}
+
+static void __exit driver_rti800_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_rti800);
+}
+
+module_init(driver_rti800_init_module);
+module_exit(driver_rti800_cleanup_module);
 
 static irqreturn_t rti800_interrupt(int irq, void *dev);
 
@@ -475,3 +486,7 @@ static int rti800_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/rti802.c b/drivers/staging/comedi/drivers/rti802.c
index 2157edcf799..f59cb11590f 100644
--- a/drivers/staging/comedi/drivers/rti802.c
+++ b/drivers/staging/comedi/drivers/rti802.c
@@ -57,7 +57,18 @@ static struct comedi_driver driver_rti802 = {
 	.detach = rti802_detach,
 };
 
-COMEDI_INITCLEANUP(driver_rti802);
+static int __init driver_rti802_init_module(void)
+{
+	return comedi_driver_register(&driver_rti802);
+}
+
+static void __exit driver_rti802_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_rti802);
+}
+
+module_init(driver_rti802_init_module);
+module_exit(driver_rti802_cleanup_module);
 
 struct rti802_private {
 	enum {
@@ -150,3 +161,7 @@ static int rti802_detach(struct comedi_device *dev)
 
 	return 0;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c
index 07c21e686f2..3607aaee4af 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -1002,4 +1002,19 @@ static int s526_dio_insn_config(struct comedi_device *dev,
  * A convenient macro that defines init_module() and cleanup_module(),
  * as necessary.
  */
-COMEDI_INITCLEANUP(driver_s526);
+static int __init driver_s526_init_module(void)
+{
+	return comedi_driver_register(&driver_s526);
+}
+
+static void __exit driver_s526_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_s526);
+}
+
+module_init(driver_s526_init_module);
+module_exit(driver_s526_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index a3cc93362ec..d5ba3ab357a 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -60,10 +60,10 @@ INSN_CONFIG instructions:
    insn.insn=INSN_CONFIG;   //configuration instruction
    insn.n=1;                //number of operation (must be 1)
    insn.data=&initialvalue; //initial value loaded into encoder
-                            //during configuration
+				//during configuration
    insn.subdev=5;           //encoder subdevice
    insn.chanspec=CR_PACK(encoder_channel,0,AREF_OTHER); //encoder_channel
-                                                        //to configure
+							//to configure
 
    comedi_do_insn(cf,&insn); //executing configuration
 */
@@ -224,7 +224,43 @@ static struct dio_private *dio_private_word[]={
 #define devpriv ((struct s626_private *)dev->private)
 #define diopriv ((struct dio_private *)s->private)
 
-COMEDI_PCI_INITCLEANUP_NOMODULE(driver_s626, s626_pci_table);
+static int __devinit driver_s626_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_s626.driver_name);
+}
+
+static void __devexit driver_s626_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_s626_pci_driver = {
+	.id_table = s626_pci_table,
+	.probe = &driver_s626_pci_probe,
+	.remove = __devexit_p(&driver_s626_pci_remove)
+};
+
+static int __init driver_s626_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_s626);
+	if (retval < 0)
+		return retval;
+
+	driver_s626_pci_driver.name = (char *)driver_s626.driver_name;
+	return pci_register_driver(&driver_s626_pci_driver);
+}
+
+static void __exit driver_s626_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_s626_pci_driver);
+	comedi_driver_unregister(&driver_s626);
+}
+
+module_init(driver_s626_init_module);
+module_exit(driver_s626_cleanup_module);
 
 /* ioctl routines */
 static int s626_ai_insn_config(struct comedi_device *dev,
@@ -263,7 +299,7 @@ static int s626_enc_insn_write(struct comedi_device *dev,
 			       struct comedi_subdevice *s,
 			       struct comedi_insn *insn, unsigned int *data);
 static int s626_ns_to_timer(int *nanosec, int round_mode);
-static int s626_ai_load_polllist(uint8_t * ppl, struct comedi_cmd *cmd);
+static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd);
 static int s626_ai_inttrig(struct comedi_device *dev,
 			   struct comedi_subdevice *s, unsigned int trignum);
 static irqreturn_t s626_irq_handler(int irq, void *d);
@@ -294,16 +330,16 @@ static void CloseDMAB(struct comedi_device *dev, struct bufferDMA *pdma,
 /*  COUNTER OBJECT ------------------------------------------------ */
 struct enc_private {
 	/*  Pointers to functions that differ for A and B counters: */
-	uint16_t(*GetEnable) (struct comedi_device * dev, struct enc_private *);	/* Return clock enable. */
-	uint16_t(*GetIntSrc) (struct comedi_device * dev, struct enc_private *);	/* Return interrupt source. */
-	uint16_t(*GetLoadTrig) (struct comedi_device * dev, struct enc_private *);	/* Return preload trigger source. */
-	uint16_t(*GetMode) (struct comedi_device * dev, struct enc_private *);	/* Return standardized operating mode. */
-	void (*PulseIndex) (struct comedi_device * dev, struct enc_private *);	/* Generate soft index strobe. */
-	void (*SetEnable) (struct comedi_device * dev, struct enc_private *, uint16_t enab);	/* Program clock enable. */
-	void (*SetIntSrc) (struct comedi_device * dev, struct enc_private *, uint16_t IntSource);	/* Program interrupt source. */
-	void (*SetLoadTrig) (struct comedi_device * dev, struct enc_private *, uint16_t Trig);	/* Program preload trigger source. */
-	void (*SetMode) (struct comedi_device * dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc);	/* Program standardized operating mode. */
-	void (*ResetCapFlags) (struct comedi_device * dev, struct enc_private *);	/* Reset event capture flags. */
+	uint16_t(*GetEnable) (struct comedi_device *dev, struct enc_private *);	/* Return clock enable. */
+	uint16_t(*GetIntSrc) (struct comedi_device *dev, struct enc_private *);	/* Return interrupt source. */
+	uint16_t(*GetLoadTrig) (struct comedi_device *dev, struct enc_private *);	/* Return preload trigger source. */
+	uint16_t(*GetMode) (struct comedi_device *dev, struct enc_private *);	/* Return standardized operating mode. */
+	void (*PulseIndex) (struct comedi_device *dev, struct enc_private *);	/* Generate soft index strobe. */
+	void (*SetEnable) (struct comedi_device *dev, struct enc_private *, uint16_t enab);	/* Program clock enable. */
+	void (*SetIntSrc) (struct comedi_device *dev, struct enc_private *, uint16_t IntSource);	/* Program interrupt source. */
+	void (*SetLoadTrig) (struct comedi_device *dev, struct enc_private *, uint16_t Trig);	/* Program preload trigger source. */
+	void (*SetMode) (struct comedi_device *dev, struct enc_private *, uint16_t Setup, uint16_t DisableIntSrc);	/* Program standardized operating mode. */
+	void (*ResetCapFlags) (struct comedi_device *dev, struct enc_private *);	/* Reset event capture flags. */
 
 	uint16_t MyCRA;		/*    Address of CRA register. */
 	uint16_t MyCRB;		/*    Address of CRB register. */
@@ -543,13 +579,13 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->pdev = pdev;
 
 	if (pdev == NULL) {
-		printk("s626_attach: Board not present!!!\n");
+		printk(KERN_ERR "s626_attach: Board not present!!!\n");
 		return -ENODEV;
 	}
 
 	result = comedi_pci_enable(pdev, "s626");
 	if (result < 0) {
-		printk("s626_attach: comedi_pci_enable fails\n");
+		printk(KERN_ERR "s626_attach: comedi_pci_enable fails\n");
 		return -ENODEV;
 	}
 	devpriv->got_regions = 1;
@@ -558,7 +594,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	devpriv->base_addr = ioremap(resourceStart, SIZEOF_ADDRESS_SPACE);
 	if (devpriv->base_addr == NULL) {
-		printk("s626_attach: IOREMAP failed\n");
+		printk(KERN_ERR "s626_attach: IOREMAP failed\n");
 		return -ENODEV;
 	}
 
@@ -579,7 +615,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		    pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
 
 		if (devpriv->ANABuf.LogicalBase == NULL) {
-			printk("s626_attach: DMA Memory mapping error\n");
+			printk(KERN_ERR "s626_attach: DMA Memory mapping error\n");
 			return -ENOMEM;
 		}
 
@@ -596,7 +632,7 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		    pci_alloc_consistent(devpriv->pdev, DMABUF_SIZE, &appdma);
 
 		if (devpriv->RPSBuf.LogicalBase == NULL) {
-			printk("s626_attach: DMA Memory mapping error\n");
+			printk(KERN_ERR "s626_attach: DMA Memory mapping error\n");
 			return -ENOMEM;
 		}
 
@@ -622,18 +658,18 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 	/* set up interrupt handler */
 	if (dev->irq == 0) {
-		printk(" unknown irq (bad)\n");
+		printk(KERN_ERR " unknown irq (bad)\n");
 	} else {
 		ret = request_irq(dev->irq, s626_irq_handler, IRQF_SHARED,
 				  "s626", dev);
 
 		if (ret < 0) {
-			printk(" irq not available\n");
+			printk(KERN_ERR " irq not available\n");
 			dev->irq = 0;
 		}
 	}
 
-	DEBUG("s626_attach: -- it opts  %d,%d -- \n",
+	DEBUG("s626_attach: -- it opts  %d,%d --\n",
 	      it->options[0], it->options[1]);
 
 	s = dev->subdevices + 0;
@@ -779,7 +815,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		/*  Write I2C control: abort any I2C activity. */
 		MC_ENABLE(P_MC2, MC2_UPLD_IIC);
 		/*  Invoke command  upload */
-		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0) ;
+		while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
+			;
 		/*  and wait for upload to complete. */
 
 		/* Per SAA7146 data sheet, write to STATUS reg twice to
@@ -788,7 +825,8 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 			WR7146(P_I2CSTAT, I2C_CLKSEL);
 			/*  Write I2C control: reset  error flags. */
 			MC_ENABLE(P_MC2, MC2_UPLD_IIC);	/*  Invoke command upload */
-			while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ;
+			while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+				;
 			/* and wait for upload to complete. */
 		}
 
@@ -828,14 +866,14 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		 * not start up in a defined state after a PCI reset.
 		 */
 
-/*     PollList = EOPL;			// Create a simple polling */
-/* 					// list for analog input */
-/* 					// channel 0. */
+/*     PollList = EOPL;		// Create a simple polling */
+/*				// list for analog input */
+/*				// channel 0. */
 /*     ResetADC( dev, &PollList ); */
 
 /*     s626_ai_rinsn(dev,dev->subdevices,NULL,data); //( &AdcData ); // */
-/* 						  //Get initial ADC */
-/* 						  //value. */
+/*							//Get initial ADC */
+/*							//value. */
 
 /*     StartVal = data[0]; */
 
@@ -848,10 +886,10 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 /*     for ( index = 0; index < 500; index++ ) */
 /*       { */
-/* 	s626_ai_rinsn(dev,dev->subdevices,NULL,data); */
-/* 	AdcData = data[0];	//ReadADC(  &AdcData ); */
-/* 	if ( AdcData != StartVal ) */
-/* 	  break; */
+/*	s626_ai_rinsn(dev,dev->subdevices,NULL,data); */
+/*	AdcData = data[0];	//ReadADC(  &AdcData ); */
+/*	if ( AdcData != StartVal ) */
+/*		break; */
 /*       } */
 
 		/*  end initADC */
@@ -1513,7 +1551,7 @@ void ResetADC(struct comedi_device *dev, uint8_t * ppl)
 			break;	/*  Exit poll list processing loop. */
 		}
 	}
-	DEBUG("ResetADC: ADC items %d \n", devpriv->AdcItems);
+	DEBUG("ResetADC: ADC items %d\n", devpriv->AdcItems);
 
 	/* VERSION 2.01 CHANGE: DELAY CHANGED FROM 250NS to 2US.  Allow the
 	 * ADC to stabilize for 2 microseconds before starting the final
@@ -1574,7 +1612,7 @@ static int s626_ai_insn_config(struct comedi_device *dev,
 /*   register uint8_t	i; */
 /*   register int32_t	*readaddr; */
 
-/*   DEBUG("as626_ai_rinsn: ai_rinsn enter \n");  */
+/*   DEBUG("as626_ai_rinsn: ai_rinsn enter\n");  */
 
 /*   Trigger ADC scan loop start by setting RPS Signal 0. */
 /*   MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
@@ -1591,11 +1629,11 @@ static int s626_ai_insn_config(struct comedi_device *dev,
 /*  Convert ADC data to 16-bit integer values and copy to application buffer. */
 /*   for ( i = 0; i < devpriv->AdcItems; i++ ) { */
 /*     *data = s626_ai_reg_to_uint( *readaddr++ ); */
-/*     DEBUG("s626_ai_rinsn: data %d \n",*data); */
+/*     DEBUG("s626_ai_rinsn: data %d\n",*data); */
 /*     data++; */
 /*   } */
 
-/*   DEBUG("s626_ai_rinsn: ai_rinsn escape \n"); */
+/*   DEBUG("s626_ai_rinsn: ai_rinsn escape\n"); */
 /*   return i; */
 /* } */
 
@@ -1651,7 +1689,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 		/*  shift into FB BUFFER 1 register. */
 
 		/*  Wait for ADC done. */
-		while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+		while (!(RR7146(P_PSR) & PSR_GPIO2))
+			;
 
 		/*  Fetch ADC data. */
 		if (n != 0)
@@ -1683,7 +1722,8 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	/*  Wait for the data to arrive in FB BUFFER 1 register. */
 
 	/*  Wait for ADC done. */
-	while (!(RR7146(P_PSR) & PSR_GPIO2)) ;
+	while (!(RR7146(P_PSR) & PSR_GPIO2))
+		;
 
 	/*  Fetch ADC data from audio interface's input shift register. */
 
@@ -1696,7 +1736,7 @@ static int s626_ai_insn_read(struct comedi_device *dev,
 	return n;
 }
 
-static int s626_ai_load_polllist(uint8_t * ppl, struct comedi_cmd *cmd)
+static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
 {
 
 	int n;
@@ -1743,7 +1783,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	DEBUG("s626_ai_cmd: entering command function\n");
 
 	if (devpriv->ai_cmd_running) {
-		printk("s626_ai_cmd: Another ai_cmd is running %d\n",
+		printk(KERN_ERR "s626_ai_cmd: Another ai_cmd is running %d\n",
 		       dev->minor);
 		return -EBUSY;
 	}
@@ -2147,7 +2187,7 @@ static void s626_dio_init(struct comedi_device *dev)
 		DEBIwrite(dev, diopriv->WRDOut, 0);	/*  Program all outputs */
 		/*  to inactive state. */
 	}
-	DEBUG("s626_dio_init: DIO initialized \n");
+	DEBUG("s626_dio_init: DIO initialized\n");
 }
 
 /* DIO devices are slightly special.  Although it is possible to
@@ -2346,7 +2386,7 @@ static int s626_enc_insn_read(struct comedi_device *dev,
 	int n;
 	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
 
-	DEBUG("s626_enc_insn_read: encoder read channel %d \n",
+	DEBUG("s626_enc_insn_read: encoder read channel %d\n",
 	      CR_CHAN(insn->chanspec));
 
 	for (n = 0; n < insn->n; n++)
@@ -2364,7 +2404,7 @@ static int s626_enc_insn_write(struct comedi_device *dev,
 
 	struct enc_private *k = &encpriv[CR_CHAN(insn->chanspec)];
 
-	DEBUG("s626_enc_insn_write: encoder write channel %d \n",
+	DEBUG("s626_enc_insn_write: encoder write channel %d\n",
 	      CR_CHAN(insn->chanspec));
 
 	/*  Set the preload register */
@@ -2425,8 +2465,7 @@ static void s626_timer_load(struct comedi_device *dev, struct enc_private *k,
 static uint8_t trimchan[] = { 10, 9, 8, 3, 2, 7, 6, 1, 0, 5, 4 };
 
 /*  TrimDac LogicalChan-to-EepromAdrs mapping table. */
-static uint8_t trimadrs[] =
-    { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
+static uint8_t trimadrs[] = { 0x40, 0x41, 0x42, 0x50, 0x51, 0x52, 0x53, 0x60, 0x61, 0x62, 0x63 };
 
 static void LoadTrimDACs(struct comedi_device *dev)
 {
@@ -2524,10 +2563,12 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
 	/*  upload confirmation. */
 
 	MC_ENABLE(P_MC2, MC2_UPLD_IIC);
-	while (!MC_TEST(P_MC2, MC2_UPLD_IIC)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
+		;
 
 	/*  Wait until I2C bus transfer is finished or an error occurs. */
-	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY) ;
+	while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
+		;
 
 	/*  Return non-zero if I2C error occured. */
 	return RR7146(P_I2CCTRL) & I2C_ERR;
@@ -2641,7 +2682,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * Done by polling the DMAC enable flag; this flag is automatically
 	 * cleared when the transfer has finished.
 	 */
-	while ((RR7146(P_MC1) & MC1_A2OUT) != 0) ;
+	while ((RR7146(P_MC1) & MC1_A2OUT) != 0)
+		;
 
 	/* START THE OUTPUT STREAM TO THE TARGET DAC -------------------- */
 
@@ -2658,7 +2700,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * finished transferring the DAC's data DWORD from the output FIFO
 	 * to the output buffer register.
 	 */
-	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0) ;
+	while ((RR7146(P_SSR) & SSR_AF2_OUT) == 0)
+		;
 
 	/* Set up to trap execution at slot 0 when the TSL sequencer cycles
 	 * back to slot 0 after executing the EOS in slot 5.  Also,
@@ -2694,7 +2737,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 		 * from 0xFF to 0x00, which slot 0 causes to happen by shifting
 		 * out/in on SD2 the 0x00 that is always referenced by slot 5.
 		 */
-		while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0) ;
+		while ((RR7146(P_FB_BUFFER2) & 0xFF000000) != 0)
+			;
 	}
 	/* Either (1) we were too late setting the slot 0 trap; the TSL
 	 * sequencer restarted slot 0 before we could set the EOS trap flag,
@@ -2710,7 +2754,8 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
 	 * the next DAC write.  This is detected when FB_BUFFER2 MSB changes
 	 * from 0x00 to 0xFF.
 	 */
-	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0) ;
+	while ((RR7146(P_FB_BUFFER2) & 0xFF000000) == 0)
+		;
 }
 
 static void WriteMISC2(struct comedi_device *dev, uint16_t NewImage)
@@ -2749,10 +2794,12 @@ static void DEBItransfer(struct comedi_device *dev)
 
 	/*  Wait for completion of upload from shadow RAM to DEBI control */
 	/*  register. */
-	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI)) ;
+	while (!MC_TEST(P_MC2, MC2_UPLD_DEBI))
+		;
 
 	/*  Wait until DEBI transfer is done. */
-	while (RR7146(P_PSR) & PSR_DEBI_S) ;
+	while (RR7146(P_PSR) & PSR_DEBI_S)
+		;
 }
 
 /*  Write a value to a gate array register. */
@@ -3099,18 +3146,18 @@ static uint16_t GetEnable_B(struct comedi_device *dev, struct enc_private *k)
 static void SetLatchSource(struct comedi_device *dev, struct enc_private *k,
 			   uint16_t value)
 {
-	DEBUG("SetLatchSource: SetLatchSource enter 3550 \n");
+	DEBUG("SetLatchSource: SetLatchSource enter 3550\n");
 	DEBIreplace(dev, k->MyCRB,
 		    (uint16_t) (~(CRBMSK_INTCTRL | CRBMSK_LATCHSRC)),
 		    (uint16_t) (value << CRBBIT_LATCHSRC));
 
-	DEBUG("SetLatchSource: SetLatchSource exit \n");
+	DEBUG("SetLatchSource: SetLatchSource exit\n");
 }
 
 /*
  * static uint16_t GetLatchSource(struct comedi_device *dev, struct enc_private *k )
  * {
- * 	return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
+ *	return ( DEBIread( dev, k->MyCRB) >> CRBBIT_LATCHSRC ) & 3;
  * }
  */
 
@@ -3317,6 +3364,6 @@ static void CountersInit(struct comedi_device *dev)
 		k->ResetCapFlags(dev, k);
 		k->SetEnable(dev, k, CLKENAB_ALWAYS);
 	}
-	DEBUG("CountersInit: counters initialized \n");
+	DEBUG("CountersInit: counters initialized\n");
 
 }
diff --git a/drivers/staging/comedi/drivers/s626.h b/drivers/staging/comedi/drivers/s626.h
index d02742a9529..2d1afecbbb6 100644
--- a/drivers/staging/comedi/drivers/s626.h
+++ b/drivers/staging/comedi/drivers/s626.h
@@ -720,15 +720,6 @@
 #define STDMSK_CLKMULT		((uint16_t)(3 << STDBIT_CLKMULT))
 #define STDMSK_CLKENAB		((uint16_t)(1 << STDBIT_CLKENAB))
 
-/* typedef struct indexCounter */
-/* { */
-/*   unsigned int ao; */
-/*   unsigned int ai; */
-/*   unsigned int digout; */
-/*   unsigned int digin; */
-/*   unsigned int enc; */
-/* }CallCounter; */
-
 struct bufferDMA {
 	dma_addr_t PhysicalBase;
 	void *LogicalBase;
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index 0792617ebc3..c9be9e05f02 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -393,15 +393,16 @@ static void serial_write(struct file *f, struct serial_data data)
 	}
 }
 
-static void serial_2002_open(struct comedi_device *dev)
+static int serial_2002_open(struct comedi_device *dev)
 {
+	int result;
 	char port[20];
 
 	sprintf(port, "/dev/ttyS%d", devpriv->port);
 	devpriv->tty = filp_open(port, O_RDWR, 0);
 	if (IS_ERR(devpriv->tty)) {
-		printk("serial_2002: file open error = %ld\n",
-		       PTR_ERR(devpriv->tty));
+		result = (int)PTR_ERR(devpriv->tty);
+		printk("serial_2002: file open error = %d\n", result);
 	} else {
 		struct config_t {
 
@@ -411,29 +412,25 @@ static void serial_2002_open(struct comedi_device *dev)
 			int max;
 		};
 
-		struct config_t dig_in_config[32];
-		struct config_t dig_out_config[32];
-		struct config_t chan_in_config[32];
-		struct config_t chan_out_config[32];
+		struct config_t *dig_in_config;
+		struct config_t *dig_out_config;
+		struct config_t *chan_in_config;
+		struct config_t *chan_out_config;
 		int i;
 
-		for (i = 0; i < 32; i++) {
-			dig_in_config[i].kind = 0;
-			dig_in_config[i].bits = 0;
-			dig_in_config[i].min = 0;
-			dig_in_config[i].max = 0;
-			dig_out_config[i].kind = 0;
-			dig_out_config[i].bits = 0;
-			dig_out_config[i].min = 0;
-			dig_out_config[i].max = 0;
-			chan_in_config[i].kind = 0;
-			chan_in_config[i].bits = 0;
-			chan_in_config[i].min = 0;
-			chan_in_config[i].max = 0;
-			chan_out_config[i].kind = 0;
-			chan_out_config[i].bits = 0;
-			chan_out_config[i].min = 0;
-			chan_out_config[i].max = 0;
+		result = 0;
+		dig_in_config = kcalloc(32, sizeof(struct config_t),
+				GFP_KERNEL);
+		dig_out_config = kcalloc(32, sizeof(struct config_t),
+				GFP_KERNEL);
+		chan_in_config = kcalloc(32, sizeof(struct config_t),
+				GFP_KERNEL);
+		chan_out_config = kcalloc(32, sizeof(struct config_t),
+				GFP_KERNEL);
+		if (!dig_in_config || !dig_out_config
+		    || !chan_in_config || !chan_out_config) {
+			result = -ENOMEM;
+			goto err_alloc_configs;
 		}
 
 		tty_setspeed(devpriv->tty, devpriv->speed);
@@ -447,7 +444,7 @@ static void serial_2002_open(struct comedi_device *dev)
 				break;
 			} else {
 				int command, channel, kind;
-				struct config_t *cur_config = 0;
+				struct config_t *cur_config = NULL;
 
 				channel = data.value & 0x1f;
 				kind = (data.value >> 5) & 0x7;
@@ -574,8 +571,8 @@ static void serial_2002_open(struct comedi_device *dev)
 		for (i = 0; i <= 4; i++) {
 			/*  Fill in subdev data */
 			struct config_t *c;
-			unsigned char *mapping = 0;
-			struct serial2002_range_table_t *range = 0;
+			unsigned char *mapping = NULL;
+			struct serial2002_range_table_t *range = NULL;
 			int kind = 0;
 
 			switch (i) {
@@ -613,7 +610,7 @@ static void serial_2002_open(struct comedi_device *dev)
 				}
 				break;
 			default:{
-					c = 0;
+					c = NULL;
 				}
 				break;
 			}
@@ -632,22 +629,23 @@ static void serial_2002_open(struct comedi_device *dev)
 				s = &dev->subdevices[i];
 				s->n_chan = chan;
 				s->maxdata = 0;
-				if (s->maxdata_list) {
-					kfree(s->maxdata_list);
-				}
+				kfree(s->maxdata_list);
 				s->maxdata_list = maxdata_list =
 				    kmalloc(sizeof(unsigned int) * s->n_chan,
 					    GFP_KERNEL);
-				if (s->range_table_list) {
-					kfree(s->range_table_list);
-				}
+				if (!s->maxdata_list)
+					break;	/* error handled below */
+				kfree(s->range_table_list);
+				s->range_table = NULL;
+				s->range_table_list = NULL;
 				if (range) {
-					s->range_table = 0;
 					s->range_table_list = range_table_list =
 					    kmalloc(sizeof
 						    (struct
 						     serial2002_range_table_t) *
 						    s->n_chan, GFP_KERNEL);
+					if (!s->range_table_list)
+						break;	/* err handled below */
 				}
 				for (chan = 0, j = 0; j < 32; j++) {
 					if (c[j].kind == kind) {
@@ -673,7 +671,35 @@ static void serial_2002_open(struct comedi_device *dev)
 				}
 			}
 		}
+		if (i <= 4) {
+			/* Failed to allocate maxdata_list or range_table_list
+			 * for a subdevice that needed it.  */
+			result = -ENOMEM;
+			for (i = 0; i <= 4; i++) {
+				struct comedi_subdevice *s;
+
+				s = &dev->subdevices[i];
+				kfree(s->maxdata_list);
+				s->maxdata_list = NULL;
+				kfree(s->range_table_list);
+				s->range_table_list = NULL;
+			}
+		}
+
+err_alloc_configs:
+		kfree(dig_in_config);
+		kfree(dig_out_config);
+		kfree(chan_in_config);
+		kfree(chan_out_config);
+
+		if (result) {
+			if (devpriv->tty) {
+				filp_close(devpriv->tty, 0);
+				devpriv->tty = NULL;
+			}
+		}
 	}
+	return result;
 }
 
 static void serial_2002_close(struct comedi_device *dev)
@@ -879,7 +905,7 @@ static int serial2002_detach(struct comedi_device *dev)
 	int i;
 
 	printk("comedi%d: serial2002: remove\n", dev->minor);
-	for (i = 0; i < 4; i++) {
+	for (i = 0; i < 5; i++) {
 		s = &dev->subdevices[i];
 		if (s->maxdata_list) {
 			kfree(s->maxdata_list);
@@ -891,4 +917,19 @@ static int serial2002_detach(struct comedi_device *dev)
 	return 0;
 }
 
-COMEDI_INITCLEANUP(driver_serial2002);
+static int __init driver_serial2002_init_module(void)
+{
+	return comedi_driver_register(&driver_serial2002);
+}
+
+static void __exit driver_serial2002_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_serial2002);
+}
+
+module_init(driver_serial2002_init_module);
+module_exit(driver_serial2002_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/skel.c b/drivers/staging/comedi/drivers/skel.c
index 490753b3d90..0b9ecb19511 100644
--- a/drivers/staging/comedi/drivers/skel.c
+++ b/drivers/staging/comedi/drivers/skel.c
@@ -39,28 +39,28 @@ Configuration Options:
  * The previous block comment is used to automatically generate
  * documentation in Comedi and Comedilib.  The fields:
  *
- * Driver: the name of the driver
- * Description: a short phrase describing the driver.  Don't list boards.
- * Devices: a full list of the boards that attempt to be supported by
- *   the driver.  Format is "(manufacturer) board name [comedi name]",
- *   where comedi_name is the name that is used to configure the board.
- *   See the comment near board_name: in the struct comedi_driver structure
- *   below.  If (manufacturer) or [comedi name] is missing, the previous
- *   value is used.
- * Author: you
- * Updated: date when the _documentation_ was last updated.  Use 'date -R'
- *   to get a value for this.
- * Status: a one-word description of the status.  Valid values are:
- *   works - driver works correctly on most boards supported, and
- *     passes comedi_test.
- *   unknown - unknown.  Usually put there by ds.
- *   experimental - may not work in any particular release.  Author
- *     probably wants assistance testing it.
- *   bitrotten - driver has not been update in a long time, probably
- *     doesn't work, and probably is missing support for significant
- *     Comedi interface features.
- *   untested - author probably wrote it "blind", and is believed to
- *     work, but no confirmation.
+ *  Driver: the name of the driver
+ *  Description: a short phrase describing the driver.  Don't list boards.
+ *  Devices: a full list of the boards that attempt to be supported by
+ *    the driver.  Format is "(manufacturer) board name [comedi name]",
+ *    where comedi_name is the name that is used to configure the board.
+ *    See the comment near board_name: in the struct comedi_driver structure
+ *    below.  If (manufacturer) or [comedi name] is missing, the previous
+ *    value is used.
+ *  Author: you
+ *  Updated: date when the _documentation_ was last updated.  Use 'date -R'
+ *    to get a value for this.
+ *  Status: a one-word description of the status.  Valid values are:
+ *    works - driver works correctly on most boards supported, and
+ *      passes comedi_test.
+ *    unknown - unknown.  Usually put there by ds.
+ *    experimental - may not work in any particular release.  Author
+ *      probably wants assistance testing it.
+ *    bitrotten - driver has not been update in a long time, probably
+ *      doesn't work, and probably is missing support for significant
+ *      Comedi interface features.
+ *    untested - author probably wrote it "blind", and is believed to
+ *      work, but no confirmation.
  *
  * These headers should be followed by a blank line, and any comments
  * you wish to say about the driver.  The comment area is the place
@@ -620,12 +620,59 @@ static int skel_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
-/*
- * A convenient macro that defines init_module() and cleanup_module(),
- * as necessary.
- */
-COMEDI_INITCLEANUP(driver_skel);
-/* If you are writing a PCI driver you should use COMEDI_PCI_INITCLEANUP
- * instead.
- */
-/* COMEDI_PCI_INITCLEANUP(driver_skel, skel_pci_table) */
+#ifdef CONFIG_COMEDI_PCI
+static int __devinit driver_skel_pci_probe(struct pci_dev *dev,
+					   const struct pci_device_id *ent)
+{
+	return comedi_pci_auto_config(dev, driver_skel.driver_name);
+}
+
+static void __devexit driver_skel_pci_remove(struct pci_dev *dev)
+{
+	comedi_pci_auto_unconfig(dev);
+}
+
+static struct pci_driver driver_skel_pci_driver = {
+	.id_table = skel_pci_table,
+	.probe = &driver_skel_pci_probe,
+	.remove = __devexit_p(&driver_skel_pci_remove)
+};
+
+static int __init driver_skel_init_module(void)
+{
+	int retval;
+
+	retval = comedi_driver_register(&driver_skel);
+	if (retval < 0)
+		return retval;
+
+	driver_skel_pci_driver.name = (char *)driver_skel.driver_name;
+	return pci_register_driver(&driver_skel_pci_driver);
+}
+
+static void __exit driver_skel_cleanup_module(void)
+{
+	pci_unregister_driver(&driver_skel_pci_driver);
+	comedi_driver_unregister(&driver_skel);
+}
+
+module_init(driver_skel_init_module);
+module_exit(driver_skel_cleanup_module);
+#else
+static int __init driver_skel_init_module(void)
+{
+	return comedi_driver_register(&driver_skel);
+}
+
+static void __exit driver_skel_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_skel);
+}
+
+module_init(driver_skel_init_module);
+module_exit(driver_skel_cleanup_module);
+#endif
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ssv_dnp.c b/drivers/staging/comedi/drivers/ssv_dnp.c
index 18b0a83c4bb..526de2efa12 100644
--- a/drivers/staging/comedi/drivers/ssv_dnp.c
+++ b/drivers/staging/comedi/drivers/ssv_dnp.c
@@ -102,7 +102,18 @@ static struct comedi_driver driver_dnp = {
 	.num_names = ARRAY_SIZE(dnp_boards),
 };
 
-COMEDI_INITCLEANUP(driver_dnp);
+static int __init driver_dnp_init_module(void)
+{
+	return comedi_driver_register(&driver_dnp);
+}
+
+static void __exit driver_dnp_cleanup_module(void)
+{
+	comedi_driver_unregister(&driver_dnp);
+}
+
+module_init(driver_dnp_init_module);
+module_exit(driver_dnp_cleanup_module);
 
 static int dnp_dio_insn_bits(struct comedi_device *dev,
 			     struct comedi_subdevice *s,
@@ -314,3 +325,7 @@ static int dnp_dio_insn_config(struct comedi_device *dev,
 	return 1;
 
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 16d4c9f6916..598884ec3ed 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -114,7 +114,18 @@ static struct comedi_driver unioxx5_driver = {
 	.detach = unioxx5_detach
 };
 
-COMEDI_INITCLEANUP(unioxx5_driver);
+static int __init unioxx5_driver_init_module(void)
+{
+	return comedi_driver_register(&unioxx5_driver);
+}
+
+static void __exit unioxx5_driver_cleanup_module(void)
+{
+	comedi_driver_unregister(&unioxx5_driver);
+}
+
+module_init(unioxx5_driver_init_module);
+module_exit(unioxx5_driver_cleanup_module);
 
 static int unioxx5_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
@@ -302,7 +313,8 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
 		__unioxx5_analog_config(usp, i * 2);
 		outb(i + 1, subdev_iobase + 5);	/* sends channel number to card */
 		outb('H', subdev_iobase + 6);	/* requests EEPROM world */
-		while (!(inb(subdev_iobase + 0) & TxBE)) ;	/* waits while writting will be allowed */
+		while (!(inb(subdev_iobase + 0) & TxBE))
+			;	/* waits while writting will be allowed */
 		outb(0, subdev_iobase + 6);
 
 		/* waits while reading of two bytes will be allowed */
@@ -437,7 +449,8 @@ static int __unioxx5_analog_write(struct unioxx5_subd_priv *usp,
 
 	/* sending for bytes to module(one byte per cycle iteration) */
 	for (i = 0; i < 4; i++) {
-		while (!((inb(usp->usp_iobase + 0)) & TxBE)) ;	/* waits while writting will be allowed */
+		while (!((inb(usp->usp_iobase + 0)) & TxBE))
+			;	/* waits while writting will be allowed */
 		outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6);
 	}
 
@@ -467,7 +480,8 @@ static int __unioxx5_analog_read(struct unioxx5_subd_priv *usp,
 	control = inb(usp->usp_iobase);	/* get control register byte */
 
 	/* waits while reading four bytes will be allowed */
-	while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA)) ;
+	while (!((control = inb(usp->usp_iobase + 0)) & Rx4CA))
+		;
 
 	/* if four bytes readding error occurs - return 0(false) */
 	if ((control & Rx4CA_ERR_MASK)) {
@@ -526,3 +540,7 @@ static int __unioxx5_define_chan_offset(int chan_num)
 
 	return (chan_num >> 3) + 1;
 }
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 27b4cb2e2ec..4b320b1ff82 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -111,7 +111,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
 #define VENDOR_DIR_IN  0xC0
 #define VENDOR_DIR_OUT 0x40
 
-/* internal adresses of the 8051 processor */
+/* internal addresses of the 8051 processor */
 #define USBDUXSUB_CPUCS 0xE600
 
 /*
@@ -2085,7 +2085,7 @@ static int usbdux_pwm_start(struct comedi_device *dev,
 	if (ret < 0)
 		return ret;
 
-	/* initalise the buffer */
+	/* initialise the buffer */
 	for (i = 0; i < this_usbduxsub->sizePwmBuf; i++)
 		((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0;
 
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 29c3c016b93..0a164a9a66c 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -67,7 +67,7 @@
 #define VENDOR_DIR_OUT		0x40
 
 /*
- * internal adresses of the 8051 processor
+ * internal addresses of the 8051 processor
  */
 #define USBDUXFASTSUB_CPUCS	0xE600
 
diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
index 863aae40ede..0252b440885 100644
--- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
+++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
@@ -93,7 +93,7 @@ static int comedi_do_insn(struct comedi_device *dev, struct comedi_insn *insn)
 	s = dev->subdevices + insn->subdev;
 
 	if (s->type == COMEDI_SUBD_UNUSED) {
-		printk("%d not useable subdevice\n", insn->subdev);
+		printk(KERN_ERR "%d not useable subdevice\n", insn->subdev);
 		ret = -EIO;
 		goto error;
 	}
@@ -102,7 +102,7 @@ static int comedi_do_insn(struct comedi_device *dev, struct comedi_insn *insn)
 
 	ret = comedi_check_chanlist(s, 1, &insn->chanspec);
 	if (ret < 0) {
-		printk("bad chanspec\n");
+		printk(KERN_ERR "bad chanspec\n");
 		ret = -EINVAL;
 		goto error;
 	}
diff --git a/drivers/staging/crystalhd/crystalhd_lnx.c b/drivers/staging/crystalhd/crystalhd_lnx.c
index a4ec891328c..fbb80f09a3d 100644
--- a/drivers/staging/crystalhd/crystalhd_lnx.c
+++ b/drivers/staging/crystalhd/crystalhd_lnx.c
@@ -15,11 +15,12 @@
   along with this driver.  If not, see <http://www.gnu.org/licenses/>.
 ***************************************************************************/
 
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/slab.h>
 
 #include "crystalhd_lnx.h"
 
+static DEFINE_MUTEX(chd_dec_mutex);
 static struct class *crystalhd_class;
 
 static struct crystalhd_adp *g_adp_info;
@@ -152,10 +153,8 @@ static int chd_dec_fetch_cdata(struct crystalhd_adp *adp, struct crystalhd_ioctl
 	if (rc) {
 		BCMLOG_ERR("failed to pull add_cdata sz:%x ua_off:%x\n",
 			   io->add_cdata_sz, (unsigned int)ua_off);
-		if (io->add_cdata) {
-			kfree(io->add_cdata);
-			io->add_cdata = NULL;
-		}
+		kfree(io->add_cdata);
+		io->add_cdata = NULL;
 		return -ENODATA;
 	}
 
@@ -273,22 +272,22 @@ static long chd_dec_ioctl(struct file *fd, unsigned int cmd, unsigned long ua)
 		return -EINVAL;
 	}
 
-	uc = (struct crystalhd_user *)fd->private_data;
+	uc = fd->private_data;
 	if (!uc) {
 		BCMLOG_ERR("Failed to get uc\n");
 		return -ENODATA;
 	}
 
-	lock_kernel();
+	mutex_lock(&chd_dec_mutex);
 	cproc = crystalhd_get_cmd_proc(&adp->cmds, cmd, uc);
 	if (!cproc) {
 		BCMLOG_ERR("Unhandled command: %d\n", cmd);
-		unlock_kernel();
+		mutex_unlock(&chd_dec_mutex);
 		return -EINVAL;
 	}
 
 	ret = chd_dec_api_cmd(adp, ua, uc->uid, cmd, cproc);
-	unlock_kernel();
+	mutex_unlock(&chd_dec_mutex);
 	return ret;
 }
 
@@ -334,7 +333,7 @@ static int chd_dec_close(struct inode *in, struct file *fd)
 		return -EINVAL;
 	}
 
-	uc = (struct crystalhd_user *)fd->private_data;
+	uc = fd->private_data;
 	if (!uc) {
 		BCMLOG_ERR("Failed to get uc\n");
 		return -ENODATA;
@@ -435,8 +434,7 @@ static void __devexit chd_dec_release_chdev(struct crystalhd_adp *adp)
 	/* Clear iodata pool.. */
 	do {
 		temp = chd_dec_alloc_iodata(adp, 0);
-		if (temp)
-			kfree(temp);
+		kfree(temp);
 	} while (temp);
 
 	crystalhd_delete_elem_pool(adp);
diff --git a/drivers/staging/cx25821/cx25821-alsa.c b/drivers/staging/cx25821/cx25821-alsa.c
index a43b18816fa..bbe36437ac1 100644
--- a/drivers/staging/cx25821/cx25821-alsa.c
+++ b/drivers/staging/cx25821/cx25821-alsa.c
@@ -698,7 +698,7 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
 
 	/* Card "creation" */
 	card->private_free = snd_cx25821_dev_free;
-	chip = (struct cx25821_audio_dev *) card->private_data;
+	chip = card->private_data;
 	spin_lock_init(&chip->reg_lock);
 
 	chip->dev = dev;
diff --git a/drivers/staging/cxt1e1/functions.c b/drivers/staging/cxt1e1/functions.c
index 86b49809026..23ea101d7a8 100644
--- a/drivers/staging/cxt1e1/functions.c
+++ b/drivers/staging/cxt1e1/functions.c
@@ -122,19 +122,7 @@ watchdog_func (unsigned long arg)
             pr_warning("%s: drvr not available (%x)\n", __func__, drvr_state);
         return;
     }
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    /* Initialize the tq entry only the first time */
-    if (wd->init_tq)
-    {
-        wd->init_tq = 0;
-        wd->tq.routine = wd->func;
-        wd->tq.sync = 0;
-        wd->tq.data = wd->softc;
-    }
-    schedule_task (&wd->tq);
-#else
     schedule_work (&wd->work);
-#endif
     mod_timer (&wd->h, jiffies + wd->ticks);
 }
 
diff --git a/drivers/staging/cxt1e1/hwprobe.c b/drivers/staging/cxt1e1/hwprobe.c
index 4c8610293fc..89200e7af26 100644
--- a/drivers/staging/cxt1e1/hwprobe.c
+++ b/drivers/staging/cxt1e1/hwprobe.c
@@ -305,15 +305,9 @@ c4hw_attach_all (void)
     error_flag = 0;
     prep_hdw_info ();
     /*** scan PCI bus for all possible boards */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
     while ((pdev = pci_get_device (PCI_VENDOR_ID_CONEXANT,
-                                   PCI_DEVICE_ID_CN8474,
-                                   pdev)))
-#else
-    while ((pdev = pci_find_device (PCI_VENDOR_ID_CONEXANT,
                                     PCI_DEVICE_ID_CN8474,
                                     pdev)))
-#endif
     {
         if (c4_hdw_init (pdev, found))
             found++;
diff --git a/drivers/staging/cxt1e1/linux.c b/drivers/staging/cxt1e1/linux.c
index 134e7568024..eb0f4bdf627 100644
--- a/drivers/staging/cxt1e1/linux.c
+++ b/drivers/staging/cxt1e1/linux.c
@@ -142,10 +142,6 @@ getuserbychan (int channum)
 }
 
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#define DEV_TO_PRIV(dev) ( * (struct c4_priv **) ((hdlc_device*)(dev)+1))
-#else
-
 char       *
 get_hdlc_name (hdlc_device * hdlc)
 {
@@ -154,7 +150,6 @@ get_hdlc_name (hdlc_device * hdlc)
 
     return dev->name;
 }
-#endif
 
 
 static      status_t
@@ -167,7 +162,6 @@ mkret (int bsd)
 }
 
 /***************************************************************************/
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
 #include <linux/workqueue.h>
 
 /***
@@ -259,7 +253,6 @@ c4_wq_port_cleanup (mpi_t * pi)
         pi->wq_port = 0;
     }
 }
-#endif
 
 /***************************************************************************/
 
@@ -291,48 +284,6 @@ void_open (struct net_device * ndev)
 }
 
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#if !defined(GENERIC_HDLC_VERSION) || (GENERIC_HDLC_VERSION < 4)
-
-/** Linux 2.4.18-19 **/
-STATIC int
-chan_open (hdlc_device * hdlc)
-{
-    status_t    ret;
-
-    if ((ret = c4_chan_up (DEV_TO_PRIV (hdlc)->ci, DEV_TO_PRIV (hdlc)->channum)))
-        return -ret;
-    MOD_INC_USE_COUNT;
-    netif_start_queue (hdlc_to_dev (hdlc));
-    return 0;                       /* no error = success */
-}
-
-#else
-
-/** Linux 2.4.20 and higher **/
-STATIC int
-chan_open (struct net_device * ndev)
-{
-    hdlc_device *hdlc = dev_to_hdlc (ndev);
-    status_t    ret;
-
-    hdlc->proto = IF_PROTO_HDLC;
-    if ((ret = hdlc_open (hdlc)))
-    {
-        pr_info("hdlc_open failure, err %d.\n", ret);
-        return ret;
-    }
-    if ((ret = c4_chan_up (DEV_TO_PRIV (hdlc)->ci, DEV_TO_PRIV (hdlc)->channum)))
-        return -ret;
-    MOD_INC_USE_COUNT;
-    netif_start_queue (hdlc_to_dev (hdlc));
-    return 0;                       /* no error = success */
-}
-#endif
-
-#else
-
-/** Linux 2.6 **/
 STATIC int
 chan_open (struct net_device * ndev)
 {
@@ -351,39 +302,8 @@ chan_open (struct net_device * ndev)
     netif_start_queue (ndev);
     return 0;                       /* no error = success */
 }
-#endif
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#if !defined(GENERIC_HDLC_VERSION) || (GENERIC_HDLC_VERSION < 4)
-
-/** Linux 2.4.18-19 **/
-STATIC void
-chan_close (hdlc_device * hdlc)
-{
-    netif_stop_queue (hdlc_to_dev (hdlc));
-    musycc_chan_down ((ci_t *) 0, DEV_TO_PRIV (hdlc)->channum);
-    MOD_DEC_USE_COUNT;
-}
-#else
-
-/** Linux 2.4.20 and higher **/
-STATIC int
-chan_close (struct net_device * ndev)
-{
-    hdlc_device *hdlc = dev_to_hdlc (ndev);
-
-    netif_stop_queue (hdlc_to_dev (hdlc));
-    musycc_chan_down ((ci_t *) 0, DEV_TO_PRIV (hdlc)->channum);
-    hdlc_close (hdlc);
-    MOD_DEC_USE_COUNT;
-    return 0;
-}
-#endif
 
-#else
 
-/** Linux 2.6 **/
 STATIC int
 chan_close (struct net_device * ndev)
 {
@@ -396,37 +316,8 @@ chan_close (struct net_device * ndev)
     module_put (THIS_MODULE);
     return 0;
 }
-#endif
-
-
-#if !defined(GENERIC_HDLC_VERSION) || (GENERIC_HDLC_VERSION < 4)
-
-/** Linux 2.4.18-19 **/
-STATIC int
-chan_ioctl (hdlc_device * hdlc, struct ifreq * ifr, int cmd)
-{
-    if (cmd == HDLCSCLOCK)
-    {
-        ifr->ifr_ifru.ifru_ivalue = LINE_DEFAULT;
-        return 0;
-    }
-    return -EINVAL;
-}
-#endif
 
 
-#if !defined(GENERIC_HDLC_VERSION) || (GENERIC_HDLC_VERSION < 4)
-STATIC int
-chan_dev_ioctl (struct net_device * hdlc, struct ifreq * ifr, int cmd)
-{
-    if (cmd == HDLCSCLOCK)
-    {
-        ifr->ifr_ifru.ifru_ivalue = LINE_DEFAULT;
-        return 0;
-    }
-    return -EINVAL;
-}
-#else
 STATIC int
 chan_dev_ioctl (struct net_device * dev, struct ifreq * ifr, int cmd)
 {
@@ -435,16 +326,11 @@ chan_dev_ioctl (struct net_device * dev, struct ifreq * ifr, int cmd)
 
 
 STATIC int
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-chan_attach_noop (hdlc_device * hdlc, unsigned short foo_1, unsigned short foo_2)
-#else
 chan_attach_noop (struct net_device * ndev, unsigned short foo_1, unsigned short foo_2)
-#endif
 {
     return 0;                   /* our driver has nothing to do here, show's
                                  * over, go home */
 }
-#endif
 
 
 STATIC struct net_device_stats *
@@ -455,16 +341,12 @@ chan_get_stats (struct net_device * ndev)
     struct sbecom_chan_stats *stats;
     int         channum;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    channum = DEV_TO_PRIV (ndev)->channum;
-#else
     {
         struct c4_priv *priv;
 
         priv = (struct c4_priv *) dev_to_hdlc (ndev)->priv;
         channum = priv->channum;
     }
-#endif
 
     ch = c4_find_chan (channum);
     if (ch == NULL)
@@ -511,34 +393,19 @@ get_ci_by_dev (struct net_device * ndev)
 }
 
 
-#if !defined(GENERIC_HDLC_VERSION) || (GENERIC_HDLC_VERSION < 4)
-STATIC int
-c4_linux_xmit (hdlc_device * hdlc, struct sk_buff * skb)
-{
-    int         rval;
-
-    rval = musycc_start_xmit (DEV_TO_PRIV (hdlc)->ci, DEV_TO_PRIV (hdlc)->channum, skb);
-    return -rval;
-}
-#else                           /* new */
 STATIC int
 c4_linux_xmit (struct sk_buff * skb, struct net_device * ndev)
 {
     const struct c4_priv *priv;
     int         rval;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    priv = DEV_TO_PRIV (ndev);
-#else
     hdlc_device *hdlc = dev_to_hdlc (ndev);
 
     priv = hdlc->priv;
-#endif
 
     rval = musycc_start_xmit (priv->ci, priv->channum, skb);
     return -rval;
 }
-#endif                          /* GENERIC_HDLC_VERSION */
 
 static const struct net_device_ops chan_ops = {
        .ndo_open       = chan_open,
@@ -823,18 +690,10 @@ do_create_chan (struct net_device * ndev, void *data)
     ret = mkret (c4_new_chan (ci, cp.port, cp.channum, dev));
     if (ret)
     {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-        rtnl_unlock ();             /* needed due to Ioctl calling sequence */
-        V7 (unregister_hdlc_device) (dev_to_hdlc (dev));
-        rtnl_lock ();               /* needed due to Ioctl calling sequence */
-        OS_kfree (DEV_TO_PRIV (dev));
-        OS_kfree (dev);
-#else
         rtnl_unlock ();             /* needed due to Ioctl calling sequence */
         unregister_hdlc_device (dev);
         rtnl_lock ();               /* needed due to Ioctl calling sequence */
         free_netdev (dev);
-#endif
     }
     return ret;
 }
@@ -883,11 +742,7 @@ do_deluser (struct net_device * ndev, int lockit)
         const struct c4_priv *priv;
         int         channum;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-        priv = DEV_TO_PRIV (ndev);
-#else
         priv = (struct c4_priv *) dev_to_hdlc (ndev)->priv;
-#endif
         ci = priv->ci;
         channum = priv->channum;
 
@@ -897,22 +752,12 @@ do_deluser (struct net_device * ndev, int lockit)
         ch->user = 0;               /* will be freed, below */
     }
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    if (lockit)
-        rtnl_unlock ();             /* needed if Ioctl calling sequence */
-    V7 (unregister_hdlc_device) (dev_to_hdlc (ndev));
-    if (lockit)
-        rtnl_lock ();               /* needed if Ioctl calling sequence */
-    OS_kfree (DEV_TO_PRIV (ndev));
-    OS_kfree (ndev);
-#else
     if (lockit)
         rtnl_unlock ();             /* needed if Ioctl calling sequence */
     unregister_hdlc_device (ndev);
     if (lockit)
         rtnl_lock ();               /* needed if Ioctl calling sequence */
     free_netdev (ndev);
-#endif
     return 0;
 }
 
@@ -1339,14 +1184,6 @@ c4_mod_remove (void)
 module_init (c4_mod_init);
 module_exit (c4_mod_remove);
 
-#ifndef SBE_INCLUDE_SYMBOLS
-#ifndef CONFIG_SBE_WANC24_NCOMM
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-EXPORT_NO_SYMBOLS;
-#endif
-#endif
-#endif
-
 MODULE_AUTHOR ("SBE Technical Services <support@sbei.com>");
 MODULE_DESCRIPTION ("wanPCI-CxT1E1 Generic HDLC WAN Driver module");
 #ifdef MODULE_LICENSE
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index d3f5a5b52dc..12c76a553e0 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -405,7 +405,6 @@ musycc_update_tx_thp (mch_t * ch)
 }
 
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
 /*
  * This is the workq task executed by the OS when our queue_work() is
  * scheduled and run.  It can fire off either RX or TX ACTIVATION depending
@@ -515,7 +514,6 @@ musycc_wq_chan_restart (void *arg)      /* channel private structure */
 #endif
     }
 }
-#endif
 
 
  /*
@@ -531,7 +529,6 @@ musycc_chan_restart (mch_t * ch)
             ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
 #endif
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
     /* 2.6 - find next unprocessed message, then set TX thp to it */
 #ifdef RLD_RESTART_DEBUG
     pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work);
@@ -539,51 +536,9 @@ musycc_chan_restart (mch_t * ch)
     c4_wk_chan_restart (ch);        /* work queue mechanism fires off: Ref:
                                      * musycc_wq_chan_restart () */
 
-#else
-
-
-    /* 2.4 - find next unprocessed message, then set TX thp to it */
-#ifdef RLD_RESTART_DEBUG
-    pr_info(">> musycc_chan_restart: scheduling Chan %x start_tx %x\n", ch->channum, ch->ch_start_tx);
-#endif
-    /* restart transmission from background loop */
-    ch->up->up->wd_notify = WD_NOTIFY_1TX;
-#endif
 }
 
 
-#if 0
-void
-musycc_cleanup (ci_t * ci)
-{
-    mpi_t      *pi;
-    int         i, j;
-
-    /* free up driver resources */
-    ci->state = C_INIT;             /* mark as hardware not available */
-
-    for (i = 0; i < ci->max_ports; i++)
-    {
-        pi = &ci->port[i];
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
-        c4_wq_port_cleanup (pi);
-#endif
-        for (j = 0; j < MUSYCC_NCHANS; j++)
-        {
-            if (pi->chan[j])
-                OS_kfree (pi->chan[j]); /* free mch_t struct */
-        }
-        OS_kfree (pi->regram_saved);
-    }
-#if 0
-    /* obsolete - watchdog is now static w/in ci_t */
-    OS_free_watchdog (ci->wd);
-#endif
-    OS_kfree (ci->iqd_p_saved);
-    OS_kfree (ci);
-}
-#endif
-
 void
 rld_put_led (mpi_t * pi, u_int32_t ledval)
 {
@@ -2008,37 +1963,13 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
     atomic_add (len, &ci->tx_pending);
     ch->s.tx_packets++;
     ch->s.tx_bytes += len;
-#if 0
-    spin_unlock_irqrestore (&ch->ch_txlock, flags);   /* allow pending
-                                                       * interrupt to sneak
-                                                       * thru */
-#endif
-
     /*
      * If an ONR was seen, then channel requires poking to restart
      * transmission.
      */
     if (ch->ch_start_tx)
     {
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,41)
-        SD_SEM_TAKE (&ci->sem_wdbusy, "_wd_");  /* only 1 thru here, per
-                                                 * board */
-        if ((ch->ch_start_tx == CH_START_TX_ONR) && (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
-        {
-            /* ONR restart transmission from background loop */
-            ci->wd_notify = WD_NOTIFY_ONR;      /* enabled global watchdog
-                                                 * scan-thru  */
-        } else
-        {
-            /* start first transmission from background loop */
-            ci->wd_notify = WD_NOTIFY_1TX;      /* enabled global watchdog
-                                                 * scan-thru  */
-        }
         musycc_chan_restart (ch);
-        SD_SEM_GIVE (&ci->sem_wdbusy);
-#else
-        musycc_chan_restart (ch);
-#endif
     }
 #ifdef SBE_WAN256T3_ENABLE
     wan256t3_led (ci, LED_TX, LEDV_G);
@@ -2047,139 +1978,4 @@ musycc_start_xmit (ci_t * ci, int channum, void *mem_token)
 }
 
 
-#if 0
-int
-musycc_set_chan (ci_t * ci, int channum, struct sbecom_chan_param * p)
-{
-    mch_t      *ch;
-    int         rok = 0;
-    int         n = 0;
-
-    if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))      /* sanity chk param */
-        return ECHRNG;
-    if (!(ch = sd_find_chan (ci, channum)))
-        return ENOENT;
-    if (ch->channum != p->channum)
-        return EINVAL;
-    if (sd_line_is_ok (ch->user))
-    {
-        rok = 1;
-        sd_line_is_down (ch->user);
-    }
-    if (ch->state == UP &&          /* bring down in current configuration */
-        (ch->p.status != p->status ||
-         ch->p.chan_mode != p->chan_mode ||
-         ch->p.intr_mask != p->intr_mask ||
-         ch->txd_free < ch->txd_num))
-    {
-        if ((n = musycc_chan_down (ci, channum)))
-            return n;
-        if (ch->p.mode_56k != p->mode_56k)
-        {
-            ch->p = *p;             /* copy in new parameters */
-            musycc_update_timeslots (&ci->port[ch->channum / MUSYCC_NCHANS]);
-        } else
-            ch->p = *p;             /* copy in new parameters */
-        if ((n = musycc_chan_up (ci, channum)))
-            return n;
-        sd_enable_xmit (ch->user);  /* re-enable to catch flow controlled
-                                     * channel */
-    } else
-    {
-        if (ch->p.mode_56k != p->mode_56k)
-        {
-            ch->p = *p;             /* copy in new parameters */
-            musycc_update_timeslots (&ci->port[ch->channum / MUSYCC_NCHANS]);
-        } else
-            ch->p = *p;             /* copy in new parameters */
-    }
-
-    if (rok)
-        sd_line_is_up (ch->user);
-    return 0;
-}
-#endif
-
-
-int
-musycc_get_chan (ci_t * ci, int channum, struct sbecom_chan_param * p)
-{
-    mch_t      *ch;
-
-#if 0
-    if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))      /* sanity chk param */
-        return ECHRNG;
-#endif
-    if (!(ch = sd_find_chan (ci, channum)))
-        return ENOENT;
-    *p = ch->p;
-    return 0;
-}
-
-
-int
-musycc_get_chan_stats (ci_t * ci, int channum, struct sbecom_chan_stats * p)
-{
-    mch_t      *ch;
-
-    if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))      /* sanity chk param */
-        return ECHRNG;
-    if (!(ch = sd_find_chan (ci, channum)))
-        return ENOENT;
-    *p = ch->s;
-    p->tx_pending = atomic_read (&ch->tx_pending);
-    return 0;
-}
-
-
-
-#ifdef SBE_WAN256T3_ENABLE
-int
-musycc_chan_down (ci_t * ci, int channum)
-{
-    mch_t      *ch;
-    mpi_t      *pi;
-    int         i, gchan;
-
-    if (!(ch = sd_find_chan (ci, channum)))
-        return EINVAL;
-    pi = ch->up;
-    gchan = ch->gchan;
-
-    /* Deactivate the channel */
-    musycc_serv_req (pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
-    ch->ch_start_rx = 0;
-    musycc_serv_req (pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
-    ch->ch_start_tx = 0;
-
-    if (ch->state == DOWN)
-        return 0;
-    ch->state = DOWN;
-
-    pi->regram->thp[gchan] = 0;
-    pi->regram->tmp[gchan] = 0;
-    pi->regram->rhp[gchan] = 0;
-    pi->regram->rmp[gchan] = 0;
-    FLUSH_MEM_WRITE ();
-    for (i = 0; i < ch->txd_num; i++)
-    {
-        if (ch->mdt[i].mem_token != 0)
-            OS_mem_token_free (ch->mdt[i].mem_token);
-    }
-
-    for (i = 0; i < ch->rxd_num; i++)
-    {
-        if (ch->mdr[i].mem_token != 0)
-            OS_mem_token_free (ch->mdr[i].mem_token);
-    }
-
-    OS_kfree (ch->mdt);
-    ch->mdt = 0;
-    OS_kfree (ch->mdr);
-    ch->mdr = 0;
-
-    return 0;
-}
-#endif
-
 /*** End-of-File ***/
diff --git a/drivers/staging/cxt1e1/pmc93x6_eeprom.c b/drivers/staging/cxt1e1/pmc93x6_eeprom.c
index 1c8dfb80e7d..62b12fb45fc 100644
--- a/drivers/staging/cxt1e1/pmc93x6_eeprom.c
+++ b/drivers/staging/cxt1e1/pmc93x6_eeprom.c
@@ -500,11 +500,7 @@ pmc_init_seeprom (u_int32_t addr, u_int32_t serialNum)
     time_t      createTime;
     int         i;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    createTime = CURRENT_TIME;
-#else
     createTime = get_seconds ();
-#endif
 
     /* use template data */
     for (i = 0; i < sizeof (FLD_TYPE2); ++i)
diff --git a/drivers/staging/cxt1e1/pmcc4.h b/drivers/staging/cxt1e1/pmcc4.h
index 26c1f0ea72e..ef6ac7fe7dd 100644
--- a/drivers/staging/cxt1e1/pmcc4.h
+++ b/drivers/staging/cxt1e1/pmcc4.h
@@ -117,12 +117,8 @@ extern      "C"
 
 #include "pmcc4_private.h"
 
-#if !(LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
 char       *get_hdlc_name (hdlc_device *);
 
-#endif
-
-
 /*
  * external interface
  */
diff --git a/drivers/staging/cxt1e1/pmcc4_drv.c b/drivers/staging/cxt1e1/pmcc4_drv.c
index 333cf2687dd..9f730e68526 100644
--- a/drivers/staging/cxt1e1/pmcc4_drv.c
+++ b/drivers/staging/cxt1e1/pmcc4_drv.c
@@ -119,12 +119,10 @@ char        OSSIid_pmcc4_drvc[] =
 #define KERN_WARN KERN_WARNING
 
 /* forward references */
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
 status_t    c4_wk_chan_init (mpi_t *, mch_t *);
 void        c4_wq_port_cleanup (mpi_t *);
 status_t    c4_wq_port_init (mpi_t *);
 
-#endif
 int         c4_loop_port (ci_t *, int, u_int8_t);
 status_t    c4_set_port (ci_t *, int);
 status_t    musycc_chan_down (ci_t *, int);
@@ -533,145 +531,15 @@ checkPorts (ci_t * ci)
 STATIC void
 c4_watchdog (ci_t * ci)
 {
-#if 0
-    //unsigned long flags;
-#endif
-
     if (drvr_state != SBE_DRVR_AVAILABLE)
     {
         if (log_level >= LOG_MONITOR)
             pr_info("drvr not available (%x)\n", drvr_state);
         return;
     }
-#if 0
-    SD_SEM_TAKE (&ci->sem_wdbusy, "_wd_");    /* only 1 thru here, per
-                                               * board */
-#endif
-
     ci->wdcount++;
     checkPorts (ci);
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,41)
-    if (ci->wd_notify)
-    {                               /* is there a state change to search for */
-        int         port, gchan;
-
-        ci->wd_notify = 0;          /* reset notification */
-        for (gchan = 0; gchan < MUSYCC_NCHANS; gchan++)
-        {
-            for (port = 0; port < ci->max_port; port++)
-            {
-                mch_t      *ch = ci->port[port].chan[gchan];
-
-                if (!ch || ci->state != C_RUNNING)      /* state changed while
-                                                         * acquiring semaphore */
-                    break;
-                if (ch->state == UP)/* channel must be set up */
-                {
-#if 0
-#ifdef RLD_TRANS_DEBUG
-                    if (1 || log_level >= LOG_MONITOR)
-#else
-                    if (log_level >= LOG_MONITOR)
-#endif
-                        pr_info("%s: watchdog reviving Port %d Channel %d [%d] sts %x/%x, start_TX %x free %x start_RX %x\n",
-                         ci->devname, ch->channum, port, gchan, ch->channum,
-                                ch->p.status, ch->status,
-                            ch->ch_start_tx, ch->txd_free, ch->ch_start_rx);
-#endif
-
-                    /**********************************/
-                    /** check for RX restart request **/
-                    /**********************************/
-
-                    if (ch->ch_start_rx &&
-                        (ch->status & RX_ENABLED))      /* requires start on
-                                                         * enabled RX */
-                    {
-                        ch->ch_start_rx = 0;    /* we are restarting RX... */
-#ifdef RLD_TRANS_DEBUG
-                        pr_info("++ c4_watchdog() CHAN RX ACTIVATE: chan %d\n",
-                                ch->channum);
-#endif
-#ifdef RLD_RXACT_DEBUG
-                        {
-                            struct mdesc *md;
-                            static int  hereb4 = 7;
-
-                            if (hereb4)
-                            {
-                                hereb4--;
-                                md = &ch->mdr[ch->rxix_irq_srv];
-                                pr_info("++ c4_watchdog[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
-                                        ch->channum, ch->rxix_irq_srv, md, le32_to_cpu (md->status), ch->s.rx_packets);
-                                musycc_dump_rxbuffer_ring (ch, 1);      /* RLD DEBUG */
-                            }
-                        }
-#endif
-                        musycc_serv_req (ch->up, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | gchan);
-                    }
-                    /**********************************/
-                    /** check for TX restart request **/
-                    /**********************************/
-
-                    if (ch->ch_start_tx &&
-                        (ch->status & TX_ENABLED))      /* requires start on
-                                                         * enabled TX */
-                    {
-                        struct mdesc *md;
-
-                        /*
-                         * find next unprocessed message, then set TX thp to
-                         * it
-                         */
-                        musycc_update_tx_thp (ch);
-
-#if 0
-                        spin_lock_irqsave (&ch->ch_txlock, flags);
-#endif
-                        md = ch->txd_irq_srv;
-                        if (!md)
-                        {
-                            pr_info("-- c4_watchdog[%d]: WARNING, starting NULL md\n",
-                                    ch->channum);
-                            pr_info("--   chan %d txd_irq_srv %p sts %x usr_add %p sts %x, txpkt %lu\n",
-                                    ch->channum, ch->txd_irq_srv, le32_to_cpu ((struct mdesc *) (ch->txd_irq_srv)->status),
-                                    ch->txd_usr_add, le32_to_cpu ((struct mdesc *) (ch->txd_usr_add)->status),
-                                    ch->s.tx_packets);
-#if 0
-                            spin_unlock_irqrestore (&ch->ch_txlock, flags);
-#endif
-                        } else if (md->data && ((le32_to_cpu (md->status)) & MUSYCC_TX_OWNED))
-                        {
-#ifdef RLD_TRANS_DEBUG
-                            pr_info("++ c4_watchdog[%d] CHAN TX ACTIVATE: start_tx %x\n",
-                                    ch->channum, ch->ch_start_tx);
-#endif
-                            ch->ch_start_tx = 0;        /* we are restarting
-                                                         * TX... */
-#if 0
-                            spin_unlock_irqrestore (&ch->ch_txlock, flags);   /* allow interrupts for
-                                                                               * service request */
-#endif
-                            musycc_serv_req (ch->up, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | gchan);
-#ifdef RLD_TRANS_DEBUG
-                            if (1 || log_level >= LOG_MONITOR)
-#else
-                            if (log_level >= LOG_MONITOR)
-#endif
-                                pr_info("++ SACK[P%d/C%d] ack'd, continuing...\n",
-                                        ch->up->portnum, ch->channum);
-                        }
-                    }
-                }
-            }
-        }
-    }
-#else
     ci->wd_notify = 0;
-#endif
-#if 0
-    SD_SEM_GIVE (&ci->sem_wdbusy);/* release per-board hold */
-#endif
 }
 
 
@@ -690,9 +558,7 @@ c4_cleanup (void)
         for (portnum = 0; portnum < ci->max_port; portnum++)
         {
             pi = &ci->port[portnum];
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
             c4_wq_port_cleanup (pi);
-#endif
             for (j = 0; j < MUSYCC_NCHANS; j++)
             {
                 if (pi->chan[j])
@@ -700,10 +566,6 @@ c4_cleanup (void)
             }
             OS_kfree (pi->regram_saved);
         }
-#if 0
-        /* obsolete - watchdog is now static w/in ci_t */
-        OS_free_watchdog (ci->wd);
-#endif
         OS_kfree (ci->iqd_p_saved);
         OS_kfree (ci);
         ci = next;                  /* cleanup next board, if any */
@@ -1145,7 +1007,6 @@ c4_set_port (ci_t * ci, int portnum)
         return EBUSY;               /* group needs initialization only for
                                      * first channel of a group */
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
     {
         status_t    ret;
 
@@ -1153,7 +1014,6 @@ c4_set_port (ci_t * ci, int portnum)
                                                  * workqueue_struct */
             return (ret);
     }
-#endif
 
     init_comet (ci, pi->cometbase, pp->port_mode, 1 /* clockmaster == true */ , pp->portP);
     clck = pci_read_32 ((u_int32_t *) &ci->cpldbase->mclk) & PMCC4_CPLD_MCLK_MASK;
@@ -1269,14 +1129,12 @@ c4_new_chan (ci_t * ci, int portnum, int channum, void *user)
     spin_lock_init (&ch->ch_rxlock);
     spin_lock_init (&ch->ch_txlock);
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,41)
     {
         status_t    ret;
 
         if ((ret = c4_wk_chan_init (pi, ch)))
             return ret;
     }
-#endif
 
     /* save off interface assignments which bound a board */
     if (ci->first_if == 0)          /* first channel registered is assumed to
@@ -1705,31 +1563,23 @@ sbecom_get_brdinfo (ci_t * ci, struct sbe_brd_info * bip, u_int8_t *bsn)
 
     if (ci->first_if)
     {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-        np = (char *) hdlc_to_name (ci->first_if);
-#else
         {
             struct net_device *dev;
 
             dev = (struct net_device *) ci->first_if;
             np = (char *) dev->name;
         }
-#endif
         strncpy (bip->first_iname, np, CHNM_STRLEN - 1);
     } else
         strcpy (bip->first_iname, "<NULL>");
     if (ci->last_if)
     {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-        np = (char *) hdlc_to_name (ci->last_if);
-#else
         {
             struct net_device *dev;
 
             dev = (struct net_device *) ci->last_if;
             np = (char *) dev->name;
         }
-#endif
         strncpy (bip->last_iname, np, CHNM_STRLEN - 1);
     } else
         strcpy (bip->last_iname, "<NULL>");
@@ -1763,11 +1613,7 @@ c4_get_iidinfo (ci_t * ci, struct sbe_iid_info * iip)
     if (!(dev = getuserbychan (iip->channum)))
         return ENOENT;
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    np = (char *) hdlc_to_name (dev_to_hdlc (dev));
-#else
     np = dev->name;
-#endif
     strncpy (iip->iname, np, CHNM_STRLEN - 1);
     return 0;
 }
@@ -1826,11 +1672,7 @@ c4_ebus_intr_th_handler (void *devp)
     pci_write_32 ((u_int32_t *) &ci->reg->glcd, GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
 #endif
 
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,20)
-    return;
-#else
     return IRQ_RETVAL (handled);
-#endif
 }
 
 
diff --git a/drivers/staging/cxt1e1/sbecom_inline_linux.h b/drivers/staging/cxt1e1/sbecom_inline_linux.h
index c65172db2ad..5a72cb5cff4 100644
--- a/drivers/staging/cxt1e1/sbecom_inline_linux.h
+++ b/drivers/staging/cxt1e1/sbecom_inline_linux.h
@@ -48,9 +48,6 @@
 #else
 #include <linux/types.h>
 #include <linux/version.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-#include <linux/config.h>
-#endif
 #if defined(CONFIG_SMP) && ! defined(__SMP__)
 #define __SMP__
 #endif
@@ -60,12 +57,8 @@
 
 #ifdef MODULE
 #ifdef MODVERSIONS
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include <linux/modversions.h>
-#else
 #include <config/modversions.h>
 #endif
-#endif
 #include <linux/module.h>
 #endif
 #endif
@@ -260,11 +253,7 @@ OS_sem_free (void *sem)
 struct watchdog
 {
     struct timer_list h;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-    struct tq_struct tq;
-#else
     struct work_struct work;
-#endif
     void       *softc;
     void        (*func) (void *softc);
     int         ticks;
diff --git a/drivers/staging/dream/camera/msm_vfe8x.c b/drivers/staging/dream/camera/msm_vfe8x.c
index e61fdba6283..d87d56f914d 100644
--- a/drivers/staging/dream/camera/msm_vfe8x.c
+++ b/drivers/staging/dream/camera/msm_vfe8x.c
@@ -644,17 +644,10 @@ static int vfe_config(struct msm_vfe_cfg_cmd *cmd, void *data)
 		if (!axid)
 			return -EFAULT;
 
-		axio =
-			kmalloc(sizeof(struct vfe_cmd_axi_output_config),
-				GFP_ATOMIC);
-		if (!axio)
-			return -ENOMEM;
-
-		if (copy_from_user(axio, (void __user *)(vfecmd.value),
-			sizeof(struct vfe_cmd_axi_output_config))) {
-			kfree(axio);
-			return -EFAULT;
-		}
+		axio = memdup_user((void __user *)(vfecmd.value),
+				   sizeof(struct vfe_cmd_axi_output_config));
+		if (IS_ERR(axio))
+			return PTR_ERR(axio);
 
 		vfe_config_axi(OUTPUT_1, axid, axio);
 		vfe_axi_output_config(axio);
@@ -669,17 +662,10 @@ static int vfe_config(struct msm_vfe_cfg_cmd *cmd, void *data)
 		if (!axid)
 			return -EFAULT;
 
-		axio =
-			kmalloc(sizeof(struct vfe_cmd_axi_output_config),
-				GFP_ATOMIC);
-		if (!axio)
-			return -ENOMEM;
-
-		if (copy_from_user(axio, (void __user *)(vfecmd.value),
-				sizeof(struct vfe_cmd_axi_output_config))) {
-			kfree(axio);
-			return -EFAULT;
-		}
+		axio = memdup_user((void __user *)(vfecmd.value),
+				   sizeof(struct vfe_cmd_axi_output_config));
+		if (IS_ERR(axio))
+			return PTR_ERR(axio);
 
 		vfe_config_axi(OUTPUT_2, axid, axio);
 
@@ -694,17 +680,10 @@ static int vfe_config(struct msm_vfe_cfg_cmd *cmd, void *data)
 		if (!axid)
 			return -EFAULT;
 
-		axio =
-			kmalloc(sizeof(struct vfe_cmd_axi_output_config),
-				GFP_ATOMIC);
-		if (!axio)
-			return -ENOMEM;
-
-		if (copy_from_user(axio, (void __user *)(vfecmd.value),
-			sizeof(struct vfe_cmd_axi_output_config))) {
-			kfree(axio);
-			return -EFAULT;
-		}
+		axio = memdup_user((void __user *)(vfecmd.value),
+				   sizeof(struct vfe_cmd_axi_output_config));
+		if (IS_ERR(axio))
+			return PTR_ERR(axio);
 
 		vfe_config_axi(OUTPUT_1_AND_2,
 			axid, axio);
diff --git a/drivers/staging/dream/pmem.c b/drivers/staging/dream/pmem.c
index 6387365a833..7d6bbadd7fc 100644
--- a/drivers/staging/dream/pmem.c
+++ b/drivers/staging/dream/pmem.c
@@ -24,8 +24,8 @@
 #include <linux/mempolicy.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 #include <asm/cacheflush.h>
 
 #define PMEM_MAX_DEVICES 10
@@ -175,7 +175,7 @@ static int pmem_mmap(struct file *, struct vm_area_struct *);
 static int pmem_open(struct inode *, struct file *);
 static long pmem_ioctl(struct file *, unsigned int, unsigned long);
 
-struct file_operations pmem_fops = {
+const struct file_operations pmem_fops = {
 	.release = pmem_release,
 	.mmap = pmem_mmap,
 	.open = pmem_open,
@@ -209,7 +209,7 @@ static int has_allocation(struct file *file)
 
 	if (unlikely(!file->private_data))
 		return 0;
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	if (unlikely(data->index < 0))
 		return 0;
 	return 1;
@@ -223,7 +223,7 @@ static int is_master_owner(struct file *file)
 
 	if (!is_pmem_file(file) || !has_allocation(file))
 		return 0;
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	if (PMEM_FLAGS_MASTERMAP & data->flags)
 		return 1;
 	master_file = fget_light(data->master_fd, &put_needed);
@@ -268,7 +268,7 @@ static void pmem_revoke(struct file *file, struct pmem_data *data);
 
 static int pmem_release(struct inode *inode, struct file *file)
 {
-	struct pmem_data *data = (struct pmem_data *)file->private_data;
+	struct pmem_data *data = file->private_data;
 	struct pmem_region_node *region_node;
 	struct list_head *elt, *elt2;
 	int id = get_id(file), ret = 0;
@@ -399,8 +399,8 @@ static int pmem_allocate(int id, unsigned long len)
 	DLOG("order %lx\n", order);
 
 	/* look through the bitmap:
-	 * 	if you find a free slot of the correct order use it
-	 * 	otherwise, use the best fit (smallest with size > order) slot
+	 *	if you find a free slot of the correct order use it
+	 *	otherwise, use the best fit (smallest with size > order) slot
 	 */
 	while (curr < end) {
 		if (PMEM_IS_FREE(id, curr)) {
@@ -426,8 +426,8 @@ static int pmem_allocate(int id, unsigned long len)
 	}
 
 	/* now partition the best fit:
-	 * 	split the slot into 2 buddies of order - 1
-	 * 	repeat until the slot is of the correct order
+	 *	split the slot into 2 buddies of order - 1
+	 *	repeat until the slot is of the correct order
 	 */
 	while (PMEM_ORDER(id, best_fit) > (unsigned char)order) {
 		int buddy;
@@ -591,7 +591,7 @@ static int pmem_mmap(struct file *file, struct vm_area_struct *vma)
 		return -EINVAL;
 	}
 
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	down_write(&data->sem);
 	/* check this file isn't already mmaped, for submaps check this file
 	 * has never been mmaped */
@@ -690,7 +690,7 @@ int get_pmem_user_addr(struct file *file, unsigned long *start,
 #endif
 		return -1;
 	}
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	down_read(&data->sem);
 	if (data->vma) {
 		*start = data->vma->vm_start;
@@ -712,7 +712,7 @@ int get_pmem_addr(struct file *file, unsigned long *start,
 	if (!is_pmem_file(file) || !has_allocation(file))
 		return -1;
 
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	if (data->index == -1) {
 #if PMEM_DEBUG
 		printk(KERN_INFO "pmem: requested pmem data from file with no "
@@ -766,7 +766,7 @@ void put_pmem_file(struct file *file)
 	if (!is_pmem_file(file))
 		return;
 	id = get_id(file);
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 #if PMEM_DEBUG
 	down_write(&data->sem);
 	if (data->ref == 0) {
@@ -793,7 +793,7 @@ void flush_pmem_file(struct file *file, unsigned long offset, unsigned long len)
 		return;
 
 	id = get_id(file);
-	data = (struct pmem_data *)file->private_data;
+	data = file->private_data;
 	if (!pmem[id].cached)
 		return;
 
@@ -822,7 +822,7 @@ end:
 
 static int pmem_connect(unsigned long connect, struct file *file)
 {
-	struct pmem_data *data = (struct pmem_data *)file->private_data;
+	struct pmem_data *data = file->private_data;
 	struct pmem_data *src_data;
 	struct file *src_file;
 	int ret = 0, put_needed;
@@ -842,7 +842,7 @@ static int pmem_connect(unsigned long connect, struct file *file)
 		ret = -EINVAL;
 		goto err_bad_file;
 	}
-	src_data = (struct pmem_data *)src_file->private_data;
+	src_data = src_file->private_data;
 
 	if (has_allocation(file) && (data->index != src_data->index)) {
 		printk(KERN_INFO "pmem: file is already mapped but doesn't "
@@ -929,7 +929,7 @@ int pmem_remap(struct pmem_region *region, struct file *file,
 	struct mm_struct *mm = NULL;
 	struct list_head *elt, *elt2;
 	int id = get_id(file);
-	struct pmem_data *data = (struct pmem_data *)file->private_data;
+	struct pmem_data *data = file->private_data;
 
 	/* pmem region must be aligned on a page boundry */
 	if (unlikely(!PMEM_IS_PAGE_ALIGNED(region->offset) ||
@@ -1053,7 +1053,7 @@ static void pmem_revoke(struct file *file, struct pmem_data *data)
 
 static void pmem_get_size(struct pmem_region *region, struct file *file)
 {
-	struct pmem_data *data = (struct pmem_data *)file->private_data;
+	struct pmem_data *data = file->private_data;
 	int id = get_id(file);
 
 	if (!has_allocation(file)) {
@@ -1082,7 +1082,7 @@ static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 				region.offset = 0;
 				region.len = 0;
 			} else {
-				data = (struct pmem_data *)file->private_data;
+				data = file->private_data;
 				region.offset = pmem_start_addr(id, data);
 				region.len = pmem_len(id, data);
 			}
@@ -1099,7 +1099,7 @@ static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			if (copy_from_user(&region, (void __user *)arg,
 						sizeof(struct pmem_region)))
 				return -EFAULT;
-			data = (struct pmem_data *)file->private_data;
+			data = file->private_data;
 			return pmem_remap(&region, file, PMEM_MAP);
 		}
 		break;
@@ -1109,7 +1109,7 @@ static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			if (copy_from_user(&region, (void __user *)arg,
 						sizeof(struct pmem_region)))
 				return -EFAULT;
-			data = (struct pmem_data *)file->private_data;
+			data = file->private_data;
 			return pmem_remap(&region, file, PMEM_UNMAP);
 			break;
 		}
@@ -1139,7 +1139,7 @@ static long pmem_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		{
 			if (has_allocation(file))
 				return -EINVAL;
-			data = (struct pmem_data *)file->private_data;
+			data = file->private_data;
 			data->index = pmem_allocate(id, arg);
 			break;
 		}
diff --git a/drivers/staging/dt3155/Kconfig b/drivers/staging/dt3155/Kconfig
deleted file mode 100644
index 4a3293c721b..00000000000
--- a/drivers/staging/dt3155/Kconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-config DT3155
-	tristate "DT3155 Digitizer support"
-	depends on PCI
-
diff --git a/drivers/staging/dt3155/Makefile b/drivers/staging/dt3155/Makefile
deleted file mode 100644
index 136f21fdbbe..00000000000
--- a/drivers/staging/dt3155/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-obj-$(CONFIG_DT3155)	+= dt3155.o
-dt3155-objs :=	\
-		dt3155_drv.o	\
-		dt3155_isr.o	\
-		dt3155_io.o	\
-		allocator.o
diff --git a/drivers/staging/dt3155/TODO b/drivers/staging/dt3155/TODO
deleted file mode 100644
index 3baa3b6294c..00000000000
--- a/drivers/staging/dt3155/TODO
+++ /dev/null
@@ -1,10 +0,0 @@
-TODO:
-	- fix checkpatch.pl issues
-	- remove old kernel support, it is not needed
-	- convert to proper PCI device API
-	- fix sparse warnings
-	- audit for correct subsystem interaction
-	- review review review!
-
-Please send patches to Greg Kroah-Hartman <greg@kroah.com>
-and Scott Smedley <ss@aao.gov.au>
diff --git a/drivers/staging/dt3155/allocator.README b/drivers/staging/dt3155/allocator.README
deleted file mode 100644
index 05700b6c926..00000000000
--- a/drivers/staging/dt3155/allocator.README
+++ /dev/null
@@ -1,98 +0,0 @@
-
-The allocator shown here  exploits high memory. This document explains
-how  a user can  deal   with drivers uses   this  allocator and how  a
-programmer can link in the module.
-
-The module is being used by my pxc and pxdrv device drivers (as well as
-other ones), available from ftp.systemy.it/pub/develop and
-ftp.linux.it/pub/People/Rubini
-
-	User's manual
-	=============
-
-
-One of the most compelling problems with any DMA-capable device is the
-allocation  of a suitable  memory buffer. The "allocator" module tries
-to deal with  the problem in  a clean way.  The module is  able to use
-high   memory  (above the  one   used in  normal   operation)  for DMA
-allocation.
-
-To prevent  the  kernel for using   high memory,  so  that it  remains
-available for  DMA, you should  pass a  command  line argument to  the
-kernel.  Command line arguments  can be passed to  Lilo, to Loadlin or
-to whichever loader  you are using  (unless it's very poor in design).
-For Lilo, either use  "append=" in  /etc/lilo.conf or add  commandline
-arguments to the  interactive prompt. For  example, I have a 32MB  box
-and reserve two megs for DMA:
-
-In lilo.conf:
-	image = /zImage
-	label = linux
-	append = "mem=30M"
-
-Or, interactively:
-	LILO: linux mem=30M
-
-Once  the kernel is booted  with the  right command-line argument, any
-driver  linked   with  the  allocator   module  will  be able   to get
-DMA-capable memory without  much  trouble (unless the  various drivers
-need more memory than available).
-
-The module implements an alloc/free  mechanism,  so that it can  serve
-multiple drivers  at the  same time. Note  however that  the allocator
-uses all of  high memory and assumes to  be the only piece of software
-using such memory.
-
-
-	Programmer's manual
-	===================
-
-The allocator,  as  released, is designed  to  be linked  to  a device
-driver.  In this  case, the driver  must call allocator_init()  before
-using   the  allocator   and  must  call   allocator_cleanup()  before
-unloading.  This is  usually  done   from within  init_module()    and
-cleanup_module(). If the allocator is linked to  a driver, it won't be
-possible for several drivers to allocate high DMA memory, as explained
-above.
-
-It is possible, on the other hand, to compile the module as a standalone
-module, so that several modules can rely on the allocator for they DMA
-buffers. To compile the allocator as a standalone module, do the
-following in this directory (or provide a suitable Makefile, or edit
-the source code):
-
-	make allocator.o CC="gcc -Dallocator_init=init_module -Dallocator_cleanup=cleanup_module -include /usr/include/linux/module.h"
-
-The previous commandline  tells   to include <linux/module.h>  in  the
-first place,  and to rename the init  and cleanup function to the ones
-needed for  module loading and  unloading.  Drivers using a standalone
-allocator won't need to call allocator_init() nor allocator_cleanup().
-
-The allocator exports the following functions (declared in allocator.h):
-
-   unsigned long allocator_allocate_dma (unsigned long kilobytes,
-					 int priority);
-
-	This function returns a physical address, over high_memory,
-	which corresponds to an area of at least "kilobytes" kilobytes.
-	The area will be owned by the module calling the function.
-	The returned address can be passed to device boards, to instruct
-	their DMA controllers, via phys_to_bus(). The address can be used
-	by C code after vremap()/ioremap(). The "priority" argument should
-	be GFP_KERNEL or GFP_ATOMIC, according to the context of the
-	caller; it is used to call kmalloc(), as the allocator must keep
-	track of any region it gives away. In case of error the function
-	returns 0, and the caller is expected to issue a -ENOMEM error.
-
-
-   void allocator_free_dma (unsigned long address);
-
-	This function is the reverse of the previous one. If a driver
-	doesn't free the DMA memory it allocated, the allocator will
-	consider such memory as busy. Note, however, that
-	allocator_cleanup() calls kfree() on every region it reclaimed,
-	so that a driver with the allocator linked in can avoid calling
-	allocator_free_dma() at unload time.
-
-
-
diff --git a/drivers/staging/dt3155/allocator.c b/drivers/staging/dt3155/allocator.c
deleted file mode 100644
index d33947b0378..00000000000
--- a/drivers/staging/dt3155/allocator.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * allocator.c -- allocate after high_memory, if available
- *
- * NOTE: this is different from my previous allocator, the one that
- *       assembles pages, which revealed itself both slow and unreliable.
- *
- * Copyright (C) 1998   rubini@linux.it (Alessandro Rubini)
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-
--- Changes --
-
-  Date	      Programmer  Description of changes made
-  -------------------------------------------------------------------
-  02-Aug-2002 NJC         allocator now steps in 1MB increments, rather
-			  than doubling its size each time.
-			  Also, allocator_init(u32 *) now returns
-			  (in the first arg) the size of the free
-			  space.  This is no longer consistent with
-			  using the allocator as a module, and some changes
-			  may be necessary for that purpose.  This was
-			  designed to work with the DT3155 driver, in
-			  stand alone mode only!!!
-  26-Oct-2009 SS	  Port to 2.6.30 kernel.
- */
-
-
-#ifndef __KERNEL__
-#  define __KERNEL__
-#endif
-#ifndef MODULE
-#  define MODULE
-#endif
-
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/mm.h>	/* PAGE_ALIGN() */
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/page.h>
-
-#include "allocator.h"
-
-/*#define ALL_DEBUG*/
-#define ALL_MSG "allocator: "
-
-#undef PDEBUG             /* undef it, just in case */
-#ifdef ALL_DEBUG
-#  define __static
-#  define DUMP_LIST() dump_list()
-#  ifdef __KERNEL__
-     /* This one if debugging is on, and kernel space */
-#    define PDEBUG(fmt, args...) printk(KERN_DEBUG ALL_MSG fmt, ## args)
-#  else
-     /* This one for user space */
-#    define PDEBUG(fmt, args...) fprintf(stderr, fmt, ## args)
-#  endif
-#else
-#  define PDEBUG(fmt, args...) /* not debugging: nothing */
-#  define DUMP_LIST()
-#  define __static static
-#endif
-
-#undef PDEBUGG
-#define PDEBUGG(fmt, args...)
-/*#define PDEBUGG(fmt, args...) printk( KERN_DEBUG ALL_MSG fmt, ## args)*/
-
-
-static int allocator_himem = 1; /* 0 = probe, pos. = megs, neg. = disable   */
-static int allocator_step = 1;  /* This is the step size in MB              */
-static int allocator_probe = 1; /* This is a flag -- 1=probe, 0=don't probe */
-
-static unsigned long allocator_buffer;		/* physical address */
-static unsigned long allocator_buffer_size;	/* kilobytes */
-
-/*
- * The allocator keeps a list of DMA areas, so multiple devices
- * can coexist. The list is kept sorted by address
- */
-
-struct allocator_struct {
-	unsigned long address;
-	unsigned long size;
-	struct allocator_struct *next;
-};
-
-static struct allocator_struct *allocator_list;
-
-#ifdef ALL_DEBUG
-static int dump_list(void)
-{
-	struct allocator_struct *ptr;
-
-	PDEBUG("Current list:\n");
-	for (ptr = allocator_list; ptr; ptr = ptr->next)
-		PDEBUG("0x%08lx (size %likB)\n", ptr->address, ptr->size>>10);
-	return 0;
-}
-#endif
-
-/* ========================================================================
- * This function is the actual allocator.
- *
- * If space is available in high memory (as detected at load time), that
- * one is returned. The return value is a physical address (i.e., it can
- * be used straight ahead for DMA, but needs remapping for program use).
- */
-
-unsigned long allocator_allocate_dma(unsigned long kilobytes, gfp_t flags)
-{
-	struct allocator_struct *ptr = allocator_list, *newptr;
-	unsigned long bytes = kilobytes << 10;
-
-	/* check if high memory is available */
-	if (!allocator_buffer)
-		return 0;
-
-	/* Round it to a multiple of the pagesize */
-	bytes = PAGE_ALIGN(bytes);
-	PDEBUG("request for %li bytes\n", bytes);
-
-	while (ptr && ptr->next) {
-		if (ptr->next->address - (ptr->address + ptr->size) >= bytes)
-			break; /* enough space */
-		ptr = ptr->next;
-	}
-	if (!ptr->next) {
-		DUMP_LIST();
-		PDEBUG("alloc failed\n");
-		return 0; /* end of list */
-	}
-	newptr = kmalloc(sizeof(struct allocator_struct), flags);
-	if (!newptr)
-		return 0;
-
-	/* ok, now stick it after ptr */
-	newptr->address = ptr->address + ptr->size;
-	newptr->size = bytes;
-	newptr->next = ptr->next;
-	ptr->next = newptr;
-
-	DUMP_LIST();
-	PDEBUG("returning 0x%08lx\n", newptr->address);
-	return newptr->address;
-}
-
-int allocator_free_dma(unsigned long address)
-{
-	struct allocator_struct *ptr = allocator_list, *prev;
-
-	while (ptr && ptr->next) {
-		if (ptr->next->address == address)
-			break;
-		ptr = ptr->next;
-	}
-	/* the one being freed is ptr->next */
-	prev = ptr; ptr = ptr->next;
-
-	if (!ptr) {
-		pr_err(ALL_MSG "free_dma but add. not allocated\n");
-		return -EINVAL;
-	}
-	PDEBUGG("freeing: %08lx (%li) next %08lx\n", ptr->address, ptr->size,
-		ptr->next->address);
-	prev->next = ptr->next;
-	kfree(ptr);
-
-	/* dump_list(); */
-	return 0;
-}
-
-/* ========================================================================
- * Init and cleanup
- *
- * On cleanup everything is released. If the list is not empty, that a
- * problem of our clients
- */
-int allocator_init(u32 *allocator_max)
-{
-	/* check how much free memory is there */
-	void *remapped;
-	unsigned long max;
-	unsigned long trial_size = allocator_himem<<20;
-	unsigned long last_trial = 0;
-	unsigned long step = allocator_step<<20;
-	unsigned long i = 0;
-	struct allocator_struct *head, *tail;
-	char test_string[] = "0123456789abcde"; /* 16 bytes */
-
-	PDEBUGG("himem = %i\n", allocator_himem);
-	if (allocator_himem < 0) /* don't even try */
-		return -EINVAL;
-
-	if (!trial_size)
-		trial_size = 1<<20; /* not specified: try one meg */
-
-	while (1) {
-		remapped = ioremap(__pa(high_memory), trial_size);
-		if (!remapped) {
-			PDEBUGG("%li megs failed!\n", trial_size>>20);
-			break;
-		}
-		PDEBUGG("Trying %li megs (at %p, %p)\n", trial_size>>20,
-			(void *)__pa(high_memory), remapped);
-		for (i = last_trial; i < trial_size; i += 16) {
-			strcpy((char *)(remapped)+i, test_string);
-			if (strcmp((char *)(remapped)+i, test_string))
-				break;
-			}
-		iounmap((void *)remapped);
-		schedule();
-		last_trial = trial_size;
-		if (i == trial_size)
-			trial_size += step; /* increment, if all went well */
-		else {
-			PDEBUGG("%li megs copy test failed!\n", trial_size>>20);
-			break;
-		}
-		if (!allocator_probe)
-			break;
-	}
-	PDEBUG("%li megs (%li k, %li b)\n", i>>20, i>>10, i);
-	allocator_buffer_size = i>>10; /* kilobytes */
-	allocator_buffer = __pa(high_memory);
-	if (!allocator_buffer_size) {
-		printk(KERN_WARNING ALL_MSG "no free high memory to use\n");
-		return -ENOMEM;
-	}
-
-	/*
-	* to simplify things, always have two cells in the list:
-	* the first and the last. This avoids some conditionals and
-	* extra code when allocating and deallocating: we only play
-	* in the middle of the list
-	*/
-	head = kmalloc(sizeof(struct allocator_struct), GFP_KERNEL);
-	if (!head)
-		return -ENOMEM;
-	tail = kmalloc(sizeof(struct allocator_struct), GFP_KERNEL);
-	if (!tail) {
-		kfree(head);
-		return -ENOMEM;
-	}
-
-	max = allocator_buffer_size<<10;
-
-	head->size = tail->size = 0;
-	head->address = allocator_buffer;
-	tail->address = allocator_buffer + max;
-	head->next = tail;
-	tail->next = NULL;
-	allocator_list = head;
-
-	/* Back to the user code, in KB */
-	*allocator_max = allocator_buffer_size;
-
-	return 0; /* ok, ready */
-}
-
-void allocator_cleanup(void)
-{
-	struct allocator_struct *ptr, *next;
-
-	for (ptr = allocator_list; ptr; ptr = next) {
-		next = ptr->next;
-		PDEBUG("freeing list: 0x%08lx\n", ptr->address);
-		kfree(ptr);
-	}
-
-	allocator_buffer      = 0;
-	allocator_buffer_size = 0;
-	allocator_list = NULL;
-}
-
-
diff --git a/drivers/staging/dt3155/allocator.h b/drivers/staging/dt3155/allocator.h
deleted file mode 100644
index 425b70fcd50..00000000000
--- a/drivers/staging/dt3155/allocator.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * allocator.h -- prototypes for allocating high memory
- *
- * NOTE: this is different from my previous allocator, the one that
- *       assembles pages, which revealed itself both slow and unreliable.
- *
- * Copyright (C) 1998   rubini@linux.it (Alessandro Rubini)
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-int allocator_free_dma(unsigned long address);
-unsigned long allocator_allocate_dma(unsigned long kilobytes, gfp_t flags);
-int allocator_init(u32 *);
-void allocator_cleanup(void);
diff --git a/drivers/staging/dt3155/dt3155.h b/drivers/staging/dt3155/dt3155.h
deleted file mode 100644
index 793e2fcf446..00000000000
--- a/drivers/staging/dt3155/dt3155.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
-
-Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-			 Jason Lapenta, Scott Smedley
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-
--- Changes --
-
-  Date     Programmer  Description of changes made
-  -------------------------------------------------------------------
-  03-Jul-2000 JML     n/a
-  10-Oct-2001 SS      port to 2.4 kernel.
-  24-Jul-2002 SS      remove unused code & added GPL licence.
-  05-Aug-2005 SS      port to 2.6 kernel; make CCIR mode default.
-
-*/
-
-#ifndef _DT3155_INC
-#define _DT3155_INC
-
-#include <linux/types.h>
-#include <linux/time.h>		/* struct timeval */
-
-
-/* Uncomment this for 50Hz CCIR */
-#define CCIR 1
-
-/* Can be 1 or 2 */
-#define MAXBOARDS 1
-
-#define BOARD_MAX_BUFFS	3
-#define MAXBUFFERS	(BOARD_MAX_BUFFS*MAXBOARDS)
-
-#define PCI_PAGE_SIZE	(1 << 12)
-
-#ifdef CCIR
-#define DT3155_MAX_ROWS	576
-#define DT3155_MAX_COLS	768
-#define FORMAT50HZ	1
-#else
-#define DT3155_MAX_ROWS	480
-#define DT3155_MAX_COLS	640
-#define FORMAT50HZ	0
-#endif
-
-/* Configuration structure */
-struct dt3155_config {
-	u32 acq_mode;
-	u32 cols, rows;
-	u32 continuous;
-};
-
-
-/* hold data for each frame */
-struct frame_info {
-	u32 addr;		/* address of the buffer with the frame */
-	u32 tag;		/* unique number for the frame */
-	struct timeval time;	/* time that capture took place */
-};
-
-/*
- * Structure for interrupt and buffer handling.
- * This is the setup for 1 card
- */
-struct dt3155_fbuffer {
-	int    nbuffers;
-
-	struct frame_info frame_info[BOARD_MAX_BUFFS];
-
-	int empty_buffers[BOARD_MAX_BUFFS];	/* indexes empty frames */
-	int empty_len;				/* Number of empty buffers */
-						/* Zero means empty */
-
-	int active_buf;			/* Where data is currently dma'ing */
-	int locked_buf;			/* Buffers used by user */
-
-	int ready_que[BOARD_MAX_BUFFS];
-	u32 ready_head;	/* The most recent buffer located here */
-	u32 ready_len;	/* The number of ready buffers */
-
-	int even_happened;
-	int even_stopped;
-
-	int stop_acquire;	/* Flag to stop interrupts */
-	u32 frame_count;	/* Counter for frames acquired by this card */
-};
-
-
-
-#define DT3155_MODE_FRAME	1
-#define DT3155_MODE_FIELD	2
-
-#define DT3155_SNAP		1
-#define DT3155_ACQ		2
-
-/* There is one status structure for each card. */
-struct dt3155_status {
-	int fixed_mode;		/* if 1, we are in fixed frame mode */
-	u32 reg_addr;	/* Register address for a single card */
-	u32 mem_addr;	/* Buffer start addr for this card */
-	u32 mem_size;	/* This is the amount of mem available  */
-	u32 irq;		/* this card's irq */
-	struct dt3155_config config;		/* configuration struct */
-	struct dt3155_fbuffer fbuffer;	/* frame buffer state struct */
-	u32 state;		/* this card's state */
-	u32 device_installed;	/* Flag if installed. 1=installed */
-};
-
-/* Reference to global status structure */
-extern struct dt3155_status dt3155_status[MAXBOARDS];
-
-#define DT3155_STATE_IDLE	0x00
-#define DT3155_STATE_FRAME	0x01
-#define DT3155_STATE_FLD	0x02
-#define DT3155_STATE_STOP	0x100
-#define DT3155_STATE_ERROR	0x200
-#define DT3155_STATE_MODE	0x0ff
-
-#define DT3155_IOC_MAGIC	'!'
-
-#define DT3155_SET_CONFIG	_IOW(DT3155_IOC_MAGIC, 1, struct dt3155_config)
-#define DT3155_GET_CONFIG	_IOR(DT3155_IOC_MAGIC, 2, struct dt3155_status)
-#define DT3155_STOP		_IO(DT3155_IOC_MAGIC, 3)
-#define DT3155_START		_IO(DT3155_IOC_MAGIC, 4)
-#define DT3155_FLUSH		_IO(DT3155_IOC_MAGIC, 5)
-#define DT3155_IOC_MAXNR	5
-
-/* Error codes */
-
-#define DT_ERR_NO_BUFFERS	0x10000	/* not used but it might be one day */
-#define DT_ERR_CORRUPT		0x20000
-#define DT_ERR_OVERRUN		0x30000
-#define DT_ERR_I2C_TIMEOUT	0x40000
-#define DT_ERR_MASK		0xff0000/* not used but it might be one day */
-
-/* User code will probably want to declare one of these for each card */
-struct dt3155_read {
-	u32 offset;
-	u32 frame_seq;
-	u32 state;
-
-	struct frame_info frame_info;
-};
-
-#endif /* _DT3155_inc */
diff --git a/drivers/staging/dt3155/dt3155.sysvinit b/drivers/staging/dt3155/dt3155.sysvinit
deleted file mode 100644
index 92ec0939cb7..00000000000
--- a/drivers/staging/dt3155/dt3155.sysvinit
+++ /dev/null
@@ -1,60 +0,0 @@
-#! /bin/sh
-#
-# Module load/unload script for use with SysV-style /etc/init.d/ systems.
-# On a Debian system, copy this to /etc/init.d/dt3155 and then run
-# 	/usr/sbin/update-rc.d dt3155 defaults 55
-# to create the appropriate /etc/rc?.d/[SK]55dt3155 start/stop links.
-# (The "55" is arbitrary but is what I use to load this rather late.)
-#
-#    Andy Dougherty   Feb 22 2000	doughera@lafayette.edu
-#    Dept. of Physics
-#    Lafayette College, Easton PA 18042
-#
-
-PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-
-# Edit to point to your local copy.
-FILE=/usr/local/lib/modules/dt3155/dt3155.o
-NAME="dt3155"
-DESC="dt3155 Frame Grabber module"
-DEV="dt3155"
-
-if test ! -f $FILE; then
-    echo "Unable to locate $FILE"
-    exit 0
-fi
-
-set -e
-
-case "$1" in
-  start)
-    echo -n "Loading $DESC "
-    if /sbin/insmod -v -f $FILE; then
-	major=`grep $DEV /proc/devices | awk "{print \\$1}"`
-	rm -f /dev/dt3155?
-	mknod /dev/dt3155a c $major 0
-	mknod /dev/dt3155b c $major 1
-	chmod go+rw /dev/dt3155?
-	echo
-    else
-	echo "$FILE not loaded."
-    fi
-    ;;
-  stop)
-    echo -n "Unloading $DESC: "
-    if /sbin/rmmod $NAME ; then
-	echo
-    else
-	echo "$DEV not removed"
-	exit 0
-    fi
-    rm -f /dev/dt3155?
-    ;;
-  *)
-    echo "Usage: /etc/init.d/$NAME {start|stop}"
-    exit 1
-    ;;
-esac
-
-exit 0
-
diff --git a/drivers/staging/dt3155/dt3155_drv.c b/drivers/staging/dt3155/dt3155_drv.c
deleted file mode 100644
index 40ef97f3feb..00000000000
--- a/drivers/staging/dt3155/dt3155_drv.c
+++ /dev/null
@@ -1,1099 +0,0 @@
-/*
-
-Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-                         Jason Lapenta, Scott Smedley, Greg Sharp
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-
--- Changes --
-
-  Date     Programmer	Description of changes made
-  -------------------------------------------------------------------
-  03-Jul-2000 JML       n/a
-  10-Oct-2001 SS        port to 2.4 kernel
-  02-Apr-2002 SS        Mods to use allocator as a standalone module;
-                        Merged John Roll's changes (john@cfa.harvard.edu)
-                        to make work with multiple boards.
-  02-Jul-2002 SS        Merged James Rose's chages (rosejr@purdue.edu) to:
-                         * fix successive interrupt-driven captures
-                         * add select/poll support.
-  10-Jul-2002 GCS       Add error check when ndevices > MAXBOARDS.
-  02-Aug-2002 GCS       Fix field mode so that odd (lower) field is stored
-                        in lower half of buffer.
-  05-Aug-2005 SS        port to 2.6 kernel.
-  26-Oct-2009 SS	port to 2.6.30 kernel.
-
--- Notes --
-
-** appended "mem=124" in lilo.conf to allow for 4megs free on my 128meg system.
- * using allocator.c and allocator.h from o'reilly book (alessandro rubini)
-    ftp://ftp.systemy.it/pub/develop (see README.allocator)
-
- + might want to get rid of MAXboards for allocating initial buffer.
-    confusing and not necessary
-
- + in cleanup_module the MOD_IN_USE looks like it is check after it should
-
- * GFP_DMA should not be set with a PCI system (pg 291)
-
- - NJC why are only two buffers allowed? (see isr, approx line 358)
-
-*/
-
-extern void printques(int);
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/poll.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include "dt3155.h"
-#include "dt3155_drv.h"
-#include "dt3155_isr.h"
-#include "dt3155_io.h"
-#include "allocator.h"
-
-
-MODULE_LICENSE("GPL");
-
-/* Error variable.  Zero means no error. */
-int dt3155_errno = 0;
-
-#ifndef PCI_DEVICE_ID_INTEL_7116
-#define PCI_DEVICE_ID_INTEL_7116 0x1223
-#endif
-
-#define DT3155_VENDORID    PCI_VENDOR_ID_INTEL
-#define DT3155_DEVICEID    PCI_DEVICE_ID_INTEL_7116
-#define MAXPCI    16
-
-#ifdef DT_DEBUG
-#define DT_3155_DEBUG_MSG(x,y) printk(x,y)
-#else
-#define DT_3155_DEBUG_MSG(x,y)
-#endif
-
-/* wait queue for interrupts */
-wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
-
-#define DT_3155_SUCCESS 0
-#define DT_3155_FAILURE -EIO
-
-/* set to dynamicaly allocate, but it is tunable: */
-/* insmod DT_3155 dt3155 dt3155_major=XX */
-int dt3155_major = 0;
-
-/* The minor numbers are 0 and 1 ... they are not tunable.
- * They are used as the indices for the structure vectors,
- * and register address vectors
- */
-
-/* Global structures and variables */
-
-/* Status of each device */
-struct dt3155_status dt3155_status[MAXBOARDS];
-
-/* kernel logical address of the board */
-u8 *dt3155_lbase[MAXBOARDS] = { NULL
-#if MAXBOARDS == 2
-				      , NULL
-#endif
-};
-/* DT3155 registers              */
-u8 *dt3155_bbase = NULL;		  /* kernel logical address of the *
-					   * buffer region                 */
-u32  dt3155_dev_open[MAXBOARDS] = {0
-#if MAXBOARDS == 2
-				       , 0
-#endif
-};
-
-u32  ndevices = 0;
-u32 unique_tag = 0;;
-
-
-/*
- * Stops interrupt generation right away and resets the status
- * to idle.  I don't know why this works and the other way doesn't.
- * (James Rose)
- */
-static void quick_stop (int minor)
-{
-  // TODO: scott was here
-#if 1
-  ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-  /* disable interrupts */
-  int_csr_r.fld.FLD_END_EVE_EN = 0;
-  int_csr_r.fld.FLD_END_ODD_EN = 0;
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-  dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
-  /* mark the system stopped: */
-  dt3155_status[minor].state |= DT3155_STATE_IDLE;
-  dt3155_fbuffer[minor]->stop_acquire = 0;
-  dt3155_fbuffer[minor]->even_stopped = 0;
-#else
-  dt3155_status[minor].state |= DT3155_STATE_STOP;
-  dt3155_status[minor].fbuffer.stop_acquire = 1;
-#endif
-
-}
-
-
-/*****************************************************
- *  dt3155_isr() Interrupt service routien
- *
- * - looks like this isr supports IRQ sharing (or could) JML
- * - Assumes irq's are disabled, via SA_INTERRUPT flag
- * being set in request_irq() call from init_module()
- *****************************************************/
-static void dt3155_isr(int irq, void *dev_id, struct pt_regs *regs)
-{
-  int    minor = -1;
-  int    index;
-  unsigned long flags;
-  u32 buffer_addr;
-
-  /* find out who issued the interrupt */
-  for (index = 0; index < ndevices; index++) {
-    if(dev_id == (void*) &dt3155_status[index])
-      {
-	minor = index;
-	break;
-      }
-  }
-
-  /* hopefully we should not get here */
-  if (minor < 0 || minor >= MAXBOARDS) {
-    printk(KERN_ERR "dt3155_isr called with invalid dev_id\n");
-    return;
-  }
-
-  /* Check for corruption and set a flag if so */
-  ReadMReg((dt3155_lbase[minor] + CSR1), csr1_r.reg);
-
-  if ((csr1_r.fld.FLD_CRPT_EVE) || (csr1_r.fld.FLD_CRPT_ODD))
-    {
-      /* TODO: this should probably stop acquisition */
-      /* and set some flags so that dt3155_read      */
-      /* returns an error next time it is called     */
-      dt3155_errno = DT_ERR_CORRUPT;
-      printk("dt3155:  corrupt field\n");
-      return;
-    }
-
-  ReadMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-  /* Handle the even field ... */
-  if (int_csr_r.fld.FLD_END_EVE)
-    {
-      if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
-	   DT3155_STATE_FLD)
-	{
-	  dt3155_fbuffer[minor]->frame_count++;
-	}
-
-      ReadI2C(dt3155_lbase[minor], EVEN_CSR, &i2c_even_csr.reg);
-
-      /* Clear the interrupt? */
-      int_csr_r.fld.FLD_END_EVE = 1;
-
-      /* disable the interrupt if last field */
-      if (dt3155_fbuffer[minor]->stop_acquire)
-	{
-	  printk("dt3155:  even stopped.\n");
-	  dt3155_fbuffer[minor]->even_stopped = 1;
-	  if (i2c_even_csr.fld.SNGL_EVE)
-	    {
-	      int_csr_r.fld.FLD_END_EVE_EN = 0;
-	    }
-	  else
-	    {
-	      i2c_even_csr.fld.SNGL_EVE  = 1;
-	    }
-	}
-
-      WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-      /* Set up next DMA if we are doing FIELDS */
-      if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
-	   DT3155_STATE_FLD)
-	{
-	  /* GCS (Aug 2, 2002) -- In field mode, dma the odd field
-	     into the lower half of the buffer */
-	  const u32 stride =  dt3155_status[minor].config.cols;
-	  buffer_addr = dt3155_fbuffer[minor]->
-	    frame_info[dt3155_fbuffer[minor]->active_buf].addr
-	    + (DT3155_MAX_ROWS / 2) * stride;
-	  local_save_flags(flags);
-	  local_irq_disable();
-	  wake_up_interruptible(&dt3155_read_wait_queue[minor]);
-
-	  /* Set up the DMA address for the next field */
-	  local_irq_restore(flags);
-	  WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr);
-	}
-
-      /* Check for errors. */
-      i2c_even_csr.fld.DONE_EVE = 1;
-      if (i2c_even_csr.fld.ERROR_EVE)
-	dt3155_errno = DT_ERR_OVERRUN;
-
-      WriteI2C(dt3155_lbase[minor], EVEN_CSR, i2c_even_csr.reg);
-
-      /* Note that we actually saw an even field meaning  */
-      /* that subsequent odd field complete the frame     */
-      dt3155_fbuffer[minor]->even_happened = 1;
-
-      /* recording the time that the even field finished, this should be */
-      /* about time in the middle of the frame */
-      do_gettimeofday(&(dt3155_fbuffer[minor]->
-			 frame_info[dt3155_fbuffer[minor]->
-				     active_buf].time));
-      return;
-    }
-
-  /* ... now handle the odd field */
-  if (int_csr_r.fld.FLD_END_ODD)
-    {
-      ReadI2C(dt3155_lbase[minor], ODD_CSR, &i2c_odd_csr.reg);
-
-      /* Clear the interrupt? */
-      int_csr_r.fld.FLD_END_ODD = 1;
-
-      if (dt3155_fbuffer[minor]->even_happened ||
-	  (dt3155_status[minor].state & DT3155_STATE_MODE) ==
-	  DT3155_STATE_FLD)
-	{
-	  dt3155_fbuffer[minor]->frame_count++;
-	}
-
-      if (dt3155_fbuffer[minor]->stop_acquire &&
-	   dt3155_fbuffer[minor]->even_stopped)
-	{
-	  printk(KERN_DEBUG "dt3155:  stopping odd..\n");
-	  if (i2c_odd_csr.fld.SNGL_ODD)
-	    {
-	      /* disable interrupts */
-	      int_csr_r.fld.FLD_END_ODD_EN = 0;
-	      dt3155_status[minor].state &= ~(DT3155_STATE_STOP|0xff);
-
-	      /* mark the system stopped: */
-	      dt3155_status[minor].state |= DT3155_STATE_IDLE;
-	      dt3155_fbuffer[minor]->stop_acquire = 0;
-	      dt3155_fbuffer[minor]->even_stopped = 0;
-
-	      printk(KERN_DEBUG "dt3155:  state is now %x\n",
-		     dt3155_status[minor].state);
-	    }
-	  else
-	    {
-	      i2c_odd_csr.fld.SNGL_ODD  = 1;
-	    }
-	}
-
-      WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-      /* if the odd field has been acquired, then     */
-      /* change the next dma location for both fields */
-      /* and wake up the process if sleeping          */
-      if (dt3155_fbuffer[minor]->even_happened ||
-	   (dt3155_status[minor].state & DT3155_STATE_MODE) ==
-	   DT3155_STATE_FLD)
-	{
-
-	  local_save_flags(flags);
-	  local_irq_disable();
-
-#ifdef DEBUG_QUES_B
-	  printques(minor);
-#endif
-	  if (dt3155_fbuffer[minor]->nbuffers > 2)
-	    {
-	      if (!are_empty_buffers(minor))
-		{
-		  /* The number of active + locked buffers is
-		   * at most 2, and since there are none empty, there
-		   * must be at least nbuffers-2 ready buffers.
-		   * This is where we 'drop frames', oldest first. */
-		  push_empty(pop_ready(minor),  minor);
-		}
-
-	      /* The ready_que can't be full, since we know
-	       * there is one active buffer right now, so it's safe
-	       * to push the active buf on the ready_que. */
-	      push_ready(minor, dt3155_fbuffer[minor]->active_buf);
-	      /* There's at least 1 empty -- make it active */
-	      dt3155_fbuffer[minor]->active_buf = pop_empty(minor);
-	      dt3155_fbuffer[minor]->
-		frame_info[dt3155_fbuffer[minor]->
-			    active_buf].tag = ++unique_tag;
-	    }
-	  else /* nbuffers == 2, special case */
-	    { /* There is 1 active buffer.
-	       * If there is a locked buffer, keep the active buffer
-	       * the same -- that means we drop a frame.
-	       */
-	      if (dt3155_fbuffer[minor]->locked_buf < 0)
-		{
-		  push_ready(minor,
-			      dt3155_fbuffer[minor]->active_buf);
-		  if (are_empty_buffers(minor))
-		    {
-		      dt3155_fbuffer[minor]->active_buf =
-			pop_empty(minor);
-		    }
-		  else
-		    { /* no empty or locked buffers, so use a readybuf */
-		      dt3155_fbuffer[minor]->active_buf =
-			pop_ready(minor);
-		    }
-		}
-	    }
-
-#ifdef DEBUG_QUES_B
-	  printques(minor);
-#endif
-
-	  dt3155_fbuffer[minor]->even_happened = 0;
-
-	  wake_up_interruptible(&dt3155_read_wait_queue[minor]);
-
-	  local_irq_restore(flags);
-	}
-
-
-      /* Set up the DMA address for the next frame/field */
-      buffer_addr = dt3155_fbuffer[minor]->
-	frame_info[dt3155_fbuffer[minor]->active_buf].addr;
-      if ((dt3155_status[minor].state & DT3155_STATE_MODE) ==
-	   DT3155_STATE_FLD)
-	{
-	  WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
-	}
-      else
-	{
-	  WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START), buffer_addr);
-
-	  WriteMReg((dt3155_lbase[minor] + ODD_DMA_START), buffer_addr
-		    + dt3155_status[minor].config.cols);
-	}
-
-      /* Do error checking */
-      i2c_odd_csr.fld.DONE_ODD = 1;
-      if (i2c_odd_csr.fld.ERROR_ODD)
-	dt3155_errno = DT_ERR_OVERRUN;
-
-      WriteI2C(dt3155_lbase[minor], ODD_CSR, i2c_odd_csr.reg);
-
-      return;
-    }
-  /* If we get here, the Odd Field wasn't it either... */
-  printk("neither even nor odd.  shared perhaps?\n");
-}
-
-/*****************************************************
- * init_isr(int minor)
- *   turns on interupt generation for the card
- *   designated by "minor".
- *   It is called *only* from inside ioctl().
- *****************************************************/
-static void dt3155_init_isr(int minor)
-{
-  const u32 stride =  dt3155_status[minor].config.cols;
-
-  switch (dt3155_status[minor].state & DT3155_STATE_MODE)
-    {
-    case DT3155_STATE_FLD:
-      {
-	even_dma_start_r  = dt3155_status[minor].
-	  fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
-	even_dma_stride_r = 0;
-	odd_dma_stride_r  = 0;
-
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
-		  even_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
-		  even_dma_stride_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
-		  odd_dma_stride_r);
-	break;
-      }
-
-    case DT3155_STATE_FRAME:
-    default:
-      {
-	even_dma_start_r  = dt3155_status[minor].
-	  fbuffer.frame_info[dt3155_status[minor].fbuffer.active_buf].addr;
-	odd_dma_start_r   =  even_dma_start_r + stride;
-	even_dma_stride_r =  stride;
-	odd_dma_stride_r  =  stride;
-
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_START),
-		  even_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_START),
-		  odd_dma_start_r);
-	WriteMReg((dt3155_lbase[minor] + EVEN_DMA_STRIDE),
-		  even_dma_stride_r);
-	WriteMReg((dt3155_lbase[minor] + ODD_DMA_STRIDE),
-		  odd_dma_stride_r);
-	break;
-      }
-    }
-
-  /* 50/60 Hz should be set before this point but let's make sure it is */
-  /* right anyway */
-
-  ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
-  i2c_csr2.fld.HZ50 = FORMAT50HZ;
-  WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
-
-  /* enable busmaster chip, clear flags */
-
-  /*
-   * TODO:
-   * shouldn't we be concered with continuous values of
-   * DT3155_SNAP & DT3155_ACQ here? (SS)
-   */
-
-  csr1_r.reg                = 0;
-  csr1_r.fld.CAP_CONT_EVE   = 1; /* use continuous capture bits to */
-  csr1_r.fld.CAP_CONT_ODD   = 1; /* enable */
-  csr1_r.fld.FLD_DN_EVE     = 1; /* writing a 1 clears flags */
-  csr1_r.fld.FLD_DN_ODD     = 1;
-  csr1_r.fld.SRST           = 1; /* reset        - must be 1 */
-  csr1_r.fld.FIFO_EN        = 1; /* fifo control - must be 1 */
-  csr1_r.fld.FLD_CRPT_EVE   = 1; /* writing a 1 clears flags */
-  csr1_r.fld.FLD_CRPT_ODD   = 1;
-
-  WriteMReg((dt3155_lbase[minor] + CSR1),csr1_r.reg);
-
-  /* Enable interrupts at the end of each field */
-
-  int_csr_r.reg = 0;
-  int_csr_r.fld.FLD_END_EVE_EN = 1;
-  int_csr_r.fld.FLD_END_ODD_EN = 1;
-  int_csr_r.fld.FLD_START_EN = 0;
-
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-  /* start internal BUSY bits */
-
-  ReadI2C(dt3155_lbase[minor], CSR2, &i2c_csr2.reg);
-  i2c_csr2.fld.BUSY_ODD  = 1;
-  i2c_csr2.fld.BUSY_EVE  = 1;
-  WriteI2C(dt3155_lbase[minor], CSR2, i2c_csr2.reg);
-
-  /* Now its up to the interrupt routine!! */
-
-  return;
-}
-
-
-/*****************************************************
- * ioctl()
- *
- *****************************************************/
-static int dt3155_ioctl(struct inode *inode,
-			struct file *file,
-			unsigned int cmd,
-			unsigned long arg)
-{
-  int minor = MINOR(inode->i_rdev); /* What device are we ioctl()'ing? */
-
-  if (minor >= MAXBOARDS || minor < 0)
-    return -ENODEV;
-
-  /* make sure it is valid command */
-  if (_IOC_NR(cmd) > DT3155_IOC_MAXNR)
-    {
-      printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
-      printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
-	     (unsigned int)DT3155_GET_CONFIG,
-	     (unsigned int)DT3155_SET_CONFIG,
-	     (unsigned int)DT3155_START,
-	     (unsigned int)DT3155_STOP,
-	     (unsigned int)DT3155_FLUSH);
-      return -EINVAL;
-    }
-
-  switch (cmd)
-    {
-    case DT3155_SET_CONFIG:
-      {
-	if (dt3155_status[minor].state != DT3155_STATE_IDLE)
-	  return -EBUSY;
-
-	{
-	  struct dt3155_config tmp;
-	  if (copy_from_user((void *)&tmp, (void *) arg, sizeof(tmp)))
-	      return -EFAULT;
-	  /* check for valid settings */
-	  if (tmp.rows > DT3155_MAX_ROWS ||
-	      tmp.cols > DT3155_MAX_COLS ||
-	      (tmp.acq_mode != DT3155_MODE_FRAME &&
-	       tmp.acq_mode != DT3155_MODE_FIELD) ||
-	      (tmp.continuous != DT3155_SNAP &&
-	       tmp.continuous != DT3155_ACQ))
-	    {
-	      return -EINVAL;
-	    }
-	  dt3155_status[minor].config = tmp;
-	}
-	return 0;
-      }
-    case DT3155_GET_CONFIG:
-      {
-	if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
-		     sizeof(struct dt3155_status)))
-	    return -EFAULT;
-	return 0;
-      }
-    case DT3155_FLUSH: /* Flushes the buffers -- ensures fresh data */
-      {
-	if (dt3155_status[minor].state != DT3155_STATE_IDLE)
-	  return -EBUSY;
-	return dt3155_flush(minor);
-      }
-    case DT3155_STOP:
-      {
-	if (dt3155_status[minor].state & DT3155_STATE_STOP ||
-	    dt3155_status[minor].fbuffer.stop_acquire)
-	  return -EBUSY;
-
-	if (dt3155_status[minor].state == DT3155_STATE_IDLE)
-	  return 0;
-
-	quick_stop(minor);
-	if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
-		     sizeof(struct dt3155_status)))
-	    return -EFAULT;
-	return 0;
-      }
-    case DT3155_START:
-      {
-	if (dt3155_status[minor].state != DT3155_STATE_IDLE)
-	  return -EBUSY;
-
-	dt3155_status[minor].fbuffer.stop_acquire = 0;
-	dt3155_status[minor].fbuffer.frame_count = 0;
-
-	/* Set the MODE in the status -- we default to FRAME */
-	if (dt3155_status[minor].config.acq_mode == DT3155_MODE_FIELD)
-	  {
-	    dt3155_status[minor].state = DT3155_STATE_FLD;
-	  }
-	else
-	  {
-	    dt3155_status[minor].state = DT3155_STATE_FRAME;
-	  }
-
-	dt3155_init_isr(minor);
-	if (copy_to_user((void *) arg, (void *) &dt3155_status[minor],
-		      sizeof(struct dt3155_status)))
-	    return -EFAULT;
-	return 0;
-      }
-    default:
-      {
-	printk("DT3155: invalid IOCTL(0x%x)\n",cmd);
-      printk("DT3155: Valid commands (0x%x), (0x%x), (0x%x), (0x%x), (0x%x)\n",
-	     (unsigned int)DT3155_GET_CONFIG,
-	     (unsigned int)DT3155_SET_CONFIG,
-	     DT3155_START, DT3155_STOP, DT3155_FLUSH);
-	return -ENOSYS;
-      }
-    }
-  return -ENOSYS;
-}
-
-/*****************************************************
- * mmap()
- *
- * only allow the user to mmap the registers and buffer
- * It is quite possible that this is broken, since the
- * addition of of the capacity for two cards!!!!!!!!
- * It *looks* like it should work but since I'm not
- * sure how to use it, I'm not actually sure. (NJC? ditto by SS)
- *****************************************************/
-static int dt3155_mmap (struct file * file, struct vm_area_struct * vma)
-{
-  /* which device are we mmapping? */
-  int				minor = MINOR(file->f_dentry->d_inode->i_rdev);
-  unsigned long	offset;
-  offset = vma->vm_pgoff << PAGE_SHIFT;
-
-  if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
-    vma->vm_flags |= VM_IO;
-
-  /* Don't try to swap out physical pages.. */
-  vma->vm_flags |= VM_RESERVED;
-
-  /* they are mapping the registers or the buffer */
-  if ((offset == dt3155_status[minor].reg_addr &&
-       vma->vm_end - vma->vm_start == PCI_PAGE_SIZE) ||
-      (offset == dt3155_status[minor].mem_addr &&
-       vma->vm_end - vma->vm_start == dt3155_status[minor].mem_size))
-    {
-      if (remap_pfn_range(vma,
-			vma->vm_start,
-			offset >> PAGE_SHIFT,
-			vma->vm_end - vma->vm_start,
-			vma->vm_page_prot)) {
-	  printk("DT3155: remap_page_range() failed.\n");
-	  return -EAGAIN;
-	}
-    }
-  else
-    {
-      printk("DT3155: dt3155_mmap() bad call.\n");
-      return -ENXIO;
-    }
-
-  return 0;
-}
-
-
-/*****************************************************
- * open()
- *
- * Our special open code.
- * MOD_INC_USE_COUNT make sure that the driver memory is not freed
- * while the device is in use.
- *****************************************************/
-static int dt3155_open(struct inode* inode, struct file* filep)
-{
-  int minor = MINOR(inode->i_rdev); /* what device are we opening? */
-  if (dt3155_dev_open[minor]) {
-    printk ("DT3155:  Already opened by another process.\n");
-    return -EBUSY;
-  }
-
-  if (dt3155_status[minor].device_installed==0)
-    {
-      printk("DT3155 Open Error: No such device dt3155 minor number %d\n",
-	     minor);
-      return -EIO;
-    }
-
-  if (dt3155_status[minor].state != DT3155_STATE_IDLE) {
-    printk ("DT3155:  Not in idle state (state = %x)\n",
-	    dt3155_status[minor].state);
-    return -EBUSY;
-  }
-
-  printk("DT3155: Device opened.\n");
-
-  dt3155_dev_open[minor] = 1 ;
-
-  dt3155_flush(minor);
-
-  /* Disable ALL interrupts */
-  int_csr_r.reg = 0;
-  WriteMReg((dt3155_lbase[minor] + INT_CSR), int_csr_r.reg);
-
-  init_waitqueue_head(&(dt3155_read_wait_queue[minor]));
-
-  return 0;
-}
-
-
-/*****************************************************
- * close()
- *
- * Now decrement the use count.
- *
- *****************************************************/
-static int dt3155_close(struct inode *inode, struct file *filep)
-{
-  int minor;
-
-  minor = MINOR(inode->i_rdev); /* which device are we closing */
-  if (!dt3155_dev_open[minor])
-    {
-      printk("DT3155: attempt to CLOSE a not OPEN device\n");
-    }
-  else
-    {
-      dt3155_dev_open[minor] = 0;
-
-      if (dt3155_status[minor].state != DT3155_STATE_IDLE)
-	{
-	  quick_stop(minor);
-	}
-    }
-  return 0;
-}
-
-/*****************************************************
- * read()
- *
- *****************************************************/
-static ssize_t dt3155_read(struct file *filep, char __user *buf,
-			   size_t count, loff_t *ppos)
-{
-  /* which device are we reading from? */
-  int		minor = MINOR(filep->f_dentry->d_inode->i_rdev);
-  u32		offset;
-  int		frame_index;
-  struct frame_info	*frame_info;
-
-  /* TODO: this should check the error flag and */
-  /*   return an error on hardware failures */
-  if (count != sizeof(struct dt3155_read))
-    {
-      printk("DT3155 ERROR (NJC): count is not right\n");
-      return -EINVAL;
-    }
-
-
-  /* Hack here -- I'm going to allow reading even when idle.
-   * this is so that the frames can be read after STOP has
-   * been called.  Leaving it here, commented out, as a reminder
-   * for a short while to make sure there are no problems.
-   * Note that if the driver is not opened in non_blocking mode,
-   * and the device is idle, then it could sit here forever! */
-
-  /*  if (dt3155_status[minor].state == DT3155_STATE_IDLE)*/
-  /*    return -EBUSY;*/
-
-  /* non-blocking reads should return if no data */
-  if (filep->f_flags & O_NDELAY)
-    {
-      if ((frame_index = dt3155_get_ready_buffer(minor)) < 0) {
-	/*printk("dt3155:  no buffers available (?)\n");*/
-	/* 		printques(minor); */
-	return -EAGAIN;
-      }
-    }
-  else
-    {
-      /*
-       * sleep till data arrives , or we get interrupted.
-       * Note that wait_event_interruptible() does not actually
-       * sleep/wait if it's condition evaluates to true upon entry.
-       */
-      wait_event_interruptible(dt3155_read_wait_queue[minor],
-			       (frame_index = dt3155_get_ready_buffer(minor))
-			       >= 0);
-
-      if (frame_index < 0)
-	{
-	  printk ("DT3155: read: interrupted\n");
-	  quick_stop (minor);
-	  printques(minor);
-	  return -EINTR;
-	}
-    }
-
-  frame_info = &dt3155_status[minor].fbuffer.frame_info[frame_index];
-
-  /* make this an offset */
-  offset = frame_info->addr - dt3155_status[minor].mem_addr;
-
-  put_user(offset, (unsigned int *) buf);
-  buf += sizeof(u32);
-  put_user(dt3155_status[minor].fbuffer.frame_count, (unsigned int *) buf);
-  buf += sizeof(u32);
-  put_user(dt3155_status[minor].state, (unsigned int *) buf);
-  buf += sizeof(u32);
-  if (copy_to_user(buf, frame_info, sizeof(*frame_info)))
-      return -EFAULT;
-
-  return sizeof(struct dt3155_read);
-}
-
-static unsigned int dt3155_poll (struct file * filp, poll_table *wait)
-{
-  int minor = MINOR(filp->f_dentry->d_inode->i_rdev);
-
-  if (!is_ready_buf_empty(minor))
-    return POLLIN | POLLRDNORM;
-
-  poll_wait (filp, &dt3155_read_wait_queue[minor], wait);
-
-  return 0;
-}
-
-static long
-dt3155_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-
-	lock_kernel();
-	ret = dt3155_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
-	unlock_kernel();
-
-	return ret;
-}
-
-/*****************************************************
- * file operations supported by DT3155 driver
- *  needed by init_module
- *  register_chrdev
- *****************************************************/
-static struct file_operations dt3155_fops = {
-	.read		= dt3155_read,
-	.unlocked_ioctl	= dt3155_unlocked_ioctl,
-	.mmap		= dt3155_mmap,
-	.poll		= dt3155_poll,
-	.open		= dt3155_open,
-	.release	= dt3155_close
-};
-
-
-/*****************************************************
- * find_PCI();
- *
- * PCI has been totally reworked in 2.1..
- *****************************************************/
-static int find_PCI (void)
-{
-  struct pci_dev *pci_dev = NULL;
-  int error, pci_index = 0;
-  unsigned short rev_device;
-  unsigned long base;
-  unsigned char irq;
-
-  while ((pci_dev = pci_get_device
-	  (DT3155_VENDORID, DT3155_DEVICEID, pci_dev)) != NULL)
-    {
-      pci_index ++;
-
-      /* Is it really there? */
-      if ((error =
-	   pci_read_config_word(pci_dev, PCI_CLASS_DEVICE, &rev_device)))
-	continue;
-
-      /* Found a board */
-      DT_3155_DEBUG_MSG("DT3155: Device number %d \n", pci_index);
-
-      /* Make sure the driver was compiled with enough buffers to handle
-	 this many boards */
-      if (pci_index > MAXBOARDS) {
-	printk("DT3155: ERROR - found %d devices, but driver only configured "
-	       "for %d devices\n"
-	       "DT3155: Please change MAXBOARDS in dt3155.h\n",
-	       pci_index, MAXBOARDS);
-	goto err;
-      }
-
-      /* Now, just go out and make sure that this/these device(s) is/are
-	 actually mapped into the kernel address space */
-      if ((error = pci_read_config_dword(pci_dev, PCI_BASE_ADDRESS_0,
-					  (u32 *) &base)))
-	{
-	  printk("DT3155: Was not able to find device \n");
-	  goto err;
-	}
-
-      DT_3155_DEBUG_MSG("DT3155: Base address 0 for device is %lx \n", base);
-      dt3155_status[pci_index-1].reg_addr = base;
-
-      /* Remap the base address to a logical address through which we
-       * can access it. */
-      dt3155_lbase[pci_index - 1] = ioremap(base,PCI_PAGE_SIZE);
-      dt3155_status[pci_index - 1].reg_addr = base;
-      DT_3155_DEBUG_MSG("DT3155: New logical address is %p \n",
-			dt3155_lbase[pci_index-1]);
-      if (!dt3155_lbase[pci_index-1])
-	{
-	  printk("DT3155: Unable to remap control registers\n");
-	  goto err;
-	}
-
-      if ((error = pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &irq)))
-	{
-	  printk("DT3155: Was not able to find device \n");
-	  goto err;
-	}
-
-      DT_3155_DEBUG_MSG("DT3155: IRQ is %d \n",irq);
-      dt3155_status[pci_index-1].irq = irq;
-      /* Set flag: kth device found! */
-      dt3155_status[pci_index-1].device_installed = 1;
-      printk("DT3155: Installing device %d w/irq %d and address %p\n",
-	     pci_index,
-	     dt3155_status[pci_index-1].irq,
-	     dt3155_lbase[pci_index-1]);
-
-    }
-  ndevices = pci_index;
-
-  return DT_3155_SUCCESS;
-
-err:
-  pci_dev_put(pci_dev);
-  return DT_3155_FAILURE;
-}
-
-u32 allocatorAddr = 0;
-
-/*****************************************************
- * init_module()
- *****************************************************/
-int init_module(void)
-{
-  int index;
-  int rcode = 0;
-  char *devname[MAXBOARDS];
-
-  devname[0] = "dt3155a";
-#if MAXBOARDS == 2
-  devname[1] = "dt3155b";
-#endif
-
-  printk("DT3155: Loading module...\n");
-
-  /* Register the device driver */
-  rcode = register_chrdev(dt3155_major, "dt3155", &dt3155_fops);
-  if(rcode < 0)
-    {
-      printk(KERN_INFO "DT3155: register_chrdev failed \n");
-      return rcode;
-    }
-
-  if(dt3155_major == 0)
-    dt3155_major = rcode; /* dynamic */
-
-
-  /* init the status variables.                     */
-  /* DMA memory is taken care of in setup_buffers() */
-  for (index = 0; index < MAXBOARDS; index++)
-    {
-      dt3155_status[index].config.acq_mode   = DT3155_MODE_FRAME;
-      dt3155_status[index].config.continuous = DT3155_ACQ;
-      dt3155_status[index].config.cols       = DT3155_MAX_COLS;
-      dt3155_status[index].config.rows       = DT3155_MAX_ROWS;
-      dt3155_status[index].state = DT3155_STATE_IDLE;
-
-      /* find_PCI() will check if devices are installed; */
-      /* first assume they're not:                       */
-      dt3155_status[index].mem_addr          = 0;
-      dt3155_status[index].mem_size          = 0;
-      dt3155_status[index].state             = DT3155_STATE_IDLE;
-      dt3155_status[index].device_installed  = 0;
-    }
-
-  /* Now let's find the hardware.  find_PCI() will set ndevices to the
-   * number of cards found in this machine. */
-    {
-      if ((rcode = find_PCI()) !=  DT_3155_SUCCESS)
-	{
-	  printk("DT3155 error: find_PCI() failed to find dt3155 board(s)\n");
-	  unregister_chrdev(dt3155_major, "dt3155");
-	  return rcode;
-	}
-    }
-
-  /* Ok, time to setup the frame buffers */
-  if((rcode = dt3155_setup_buffers(&allocatorAddr)) < 0)
-    {
-      printk("DT3155: Error: setting up buffer not large enough.");
-      unregister_chrdev(dt3155_major, "dt3155");
-      return rcode;
-    }
-
-  /* If we are this far, then there is enough RAM */
-  /* for the buffers: Print the configuration.    */
-  for( index = 0;  index < ndevices;  index++)
-    {
-      printk("DT3155: Device = %d; acq_mode = %d; "
-	     "continuous = %d; cols = %d; rows = %d;\n",
-	     index ,
-	     dt3155_status[index].config.acq_mode,
-	     dt3155_status[index].config.continuous,
-	     dt3155_status[index].config.cols,
-	     dt3155_status[index].config.rows);
-      printk("DT3155: m_addr = 0x%x; m_size = %ld; "
-	     "state = %d; device_installed = %d\n",
-	     dt3155_status[index].mem_addr,
-	     (long int)dt3155_status[index].mem_size,
-	     dt3155_status[index].state,
-	     dt3155_status[index].device_installed);
-    }
-
-  /* Disable ALL interrupts */
-  int_csr_r.reg = 0;
-  for( index = 0;  index < ndevices;  index++)
-    {
-      WriteMReg((dt3155_lbase[index] + INT_CSR), int_csr_r.reg);
-      if(dt3155_status[index].device_installed)
-	{
-	  /*
-	   * This driver *looks* like it can handle sharing interrupts,
-	   * but I can't actually test myself. I've had reports that it
-	   * DOES work so I'll enable it for now. This comment will remain
-	   * as a reminder in case any problems arise. (SS)
-	   */
-	  /* in older kernels flags are: SA_SHIRQ | SA_INTERRUPT */
-	  rcode = request_irq(dt3155_status[index].irq, (void *)dt3155_isr,
-			       IRQF_SHARED | IRQF_DISABLED, devname[index],
-			       (void*) &dt3155_status[index]);
-	  if(rcode < 0)
-	    {
-	      printk("DT3155: minor %d request_irq failed for IRQ %d\n",
-		     index, dt3155_status[index].irq);
-	      unregister_chrdev(dt3155_major, "dt3155");
-	      return rcode;
-	    }
-	}
-    }
-
-  printk("DT3155: finished loading\n");
-
-  return 0;
-}
-
-/*****************************************************
- * cleanup_module(void)
- *
- *****************************************************/
-void cleanup_module(void)
-{
-  int index;
-
-  printk("DT3155:  cleanup_module called\n");
-
-  /* removed DMA allocated with the allocator */
-#ifdef STANDALONE_ALLOCATOR
-  if (allocatorAddr != 0)
-    allocator_free_dma(allocatorAddr);
-#else
-  allocator_cleanup();
-#endif
-
-  unregister_chrdev(dt3155_major, "dt3155");
-
-  for(index = 0; index < ndevices; index++)
-    {
-      if(dt3155_status[index].device_installed == 1)
-	{
-	  printk("DT3155: Freeing irq %d for device %d\n",
-		  dt3155_status[index].irq, index);
-	  free_irq(dt3155_status[index].irq, (void*)&dt3155_status[index]);
-	}
-    }
-}
-
diff --git a/drivers/staging/dt3155/dt3155_drv.h b/drivers/staging/dt3155/dt3155_drv.h
deleted file mode 100644
index 95e68c3388a..00000000000
--- a/drivers/staging/dt3155/dt3155_drv.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-
-Copyright 1996,2002 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-		    Scott Smedley
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-*/
-
-#ifndef DT3155_DRV_INC
-#define DT3155_DRV_INC
-
-/* kernel logical address of the frame grabbers */
-extern u8 *dt3155_lbase[MAXBOARDS];
-
-/* kernel logical address of ram buffer */
-extern u8 *dt3155_bbase;
-
-#ifdef __KERNEL__
-#include <linux/wait.h>
-
-/* wait queue for reads */
-extern wait_queue_head_t dt3155_read_wait_queue[MAXBOARDS];
-#endif
-
-/* number of devices */
-extern u32 ndevices;
-
-extern int dt3155_errno;
-
-#endif
diff --git a/drivers/staging/dt3155/dt3155_io.c b/drivers/staging/dt3155/dt3155_io.c
deleted file mode 100644
index 7792e712d16..00000000000
--- a/drivers/staging/dt3155/dt3155_io.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
- *			    Jason Lapenta, Scott Smedley
- *
- * This file is part of the DT3155 Device Driver.
- *
- * The DT3155 Device Driver is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * The DT3155 Device Driver is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
- * Public License for more details.
- */
-
-/*
- * This file provides some basic register io routines.  It is modified from
- * demo code provided by Data Translations.
- */
-
-#include <linux/delay.h>
-#include "dt3155.h"
-#include "dt3155_io.h"
-#include "dt3155_drv.h"
-
-
-/****** local copies of board's 32 bit registers ******/
-u32 even_dma_start_r;	/*  bit 0 should always be 0 */
-u32 odd_dma_start_r;	/*               .. */
-u32 even_dma_stride_r;	/*  bits 0&1 should always be 0 */
-u32 odd_dma_stride_r;	/*               .. */
-u32 even_pixel_fmt_r;
-u32 odd_pixel_fmt_r;
-
-FIFO_TRIGGER_R		fifo_trigger_r;
-XFER_MODE_R		xfer_mode_r;
-CSR1_R			csr1_r;
-RETRY_WAIT_CNT_R	retry_wait_cnt_r;
-INT_CSR_R		int_csr_r;
-
-u32 even_fld_mask_r;
-u32 odd_fld_mask_r;
-
-MASK_LENGTH_R		mask_length_r;
-FIFO_FLAG_CNT_R		fifo_flag_cnt_r;
-IIC_CLK_DUR_R		iic_clk_dur_r;
-IIC_CSR1_R		iic_csr1_r;
-IIC_CSR2_R		iic_csr2_r;
-DMA_UPPER_LMT_R		even_dma_upper_lmt_r;
-DMA_UPPER_LMT_R		odd_dma_upper_lmt_r;
-
-
-
-/******** local copies of board's 8 bit I2C registers ******/
-I2C_CSR2 i2c_csr2;
-I2C_EVEN_CSR i2c_even_csr;
-I2C_ODD_CSR i2c_odd_csr;
-I2C_CONFIG i2c_config;
-u8 i2c_dt_id;
-u8 i2c_x_clip_start;
-u8 i2c_y_clip_start;
-u8 i2c_x_clip_end;
-u8 i2c_y_clip_end;
-u8 i2c_ad_addr;
-u8 i2c_ad_lut;
-I2C_AD_CMD i2c_ad_cmd;
-u8 i2c_dig_out;
-u8 i2c_pm_lut_addr;
-u8 i2c_pm_lut_data;
-
-/*
- * wait_ibsyclr()
- *
- * This function handles read/write timing and r/w timeout error
- */
-static int wait_ibsyclr(u8 *lpReg)
-{
-	/* wait 100 microseconds */
-	udelay(100L);
-	/* __delay(loops_per_sec/10000); */
-
-	ReadMReg(lpReg + IIC_CSR2, iic_csr2_r.reg);
-	if (iic_csr2_r.fld.NEW_CYCLE) {
-		/* if NEW_CYCLE didn't clear */
-		/* TIMEOUT ERROR */
-		dt3155_errno = DT_ERR_I2C_TIMEOUT;
-		return -ETIMEDOUT;
-	}
-
-	return 0;	/* no error */
-}
-
-/*
- * WriteI2C()
- *
- * This function handles writing to 8-bit DT3155 registers
- *
- * 1st parameter is pointer to 32-bit register base address
- * 2nd parameter is reg. index;
- * 3rd is value to be written
- */
-int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal)
-{
-	/* read 32 bit IIC_CSR2 register data into union */
-
-	ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
-
-	/* for write operation */
-	iic_csr2_r.fld.DIR_RD      = 0;
-	/* I2C address of I2C register: */
-	iic_csr2_r.fld.DIR_ADDR    = wIregIndex;
-	/* 8 bit data to be written to I2C reg */
-	iic_csr2_r.fld.DIR_WR_DATA = byVal;
-	/* will start a direct I2C cycle: */
-	iic_csr2_r.fld.NEW_CYCLE   = 1;
-
-	/* xfer union data into 32 bit IIC_CSR2 register */
-	WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
-
-	/* wait for IIC cycle to finish */
-	return wait_ibsyclr(lpReg);
-}
-
-/*
- * ReadI2C()
- *
- * This function handles reading from 8-bit DT3155 registers
- *
- * 1st parameter is pointer to 32-bit register base address
- * 2nd parameter is reg. index;
- * 3rd is adrs of value to be read
- */
-int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal)
-{
-	int writestat;	/* status for return */
-
-	/*  read 32 bit IIC_CSR2 register data into union */
-	ReadMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
-
-	/*  for read operation */
-	iic_csr2_r.fld.DIR_RD     = 1;
-
-	/*  I2C address of I2C register: */
-	iic_csr2_r.fld.DIR_ADDR   = wIregIndex;
-
-	/*  will start a direct I2C cycle: */
-	iic_csr2_r.fld.NEW_CYCLE  = 1;
-
-	/*  xfer union's data into 32 bit IIC_CSR2 register */
-	WriteMReg((lpReg + IIC_CSR2), iic_csr2_r.reg);
-
-	/* wait for IIC cycle to finish */
-	writestat = wait_ibsyclr(lpReg);
-
-	/* Next 2 commands read 32 bit IIC_CSR1 register's data into union */
-	/* first read data is in IIC_CSR1 */
-	ReadMReg((lpReg + IIC_CSR1), iic_csr1_r.reg);
-
-	/* now get data u8 out of register */
-	*byVal = (u8) iic_csr1_r.fld.RD_DATA;
-
-	return writestat;
-}
diff --git a/drivers/staging/dt3155/dt3155_io.h b/drivers/staging/dt3155/dt3155_io.h
deleted file mode 100644
index d1a25100169..00000000000
--- a/drivers/staging/dt3155/dt3155_io.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
-
-Copyright 1996,2002 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-		    Jason Lapenta, Scott Smedley
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-
-
--- Changes --
-
-  Date     Programmer  Description of changes made
-  -------------------------------------------------------------------
-  24-Jul-2002 SS       GPL licence.
-
-*/
-
-/* This code is a modified version of examples provided by Data Translations.*/
-
-#ifndef DT3155_IO_INC
-#define DT3155_IO_INC
-
-/* macros to access registers */
-
-#define WriteMReg(Address, Data)	(*((u32 *)(Address)) = Data)
-#define ReadMReg(Address, Data)		(Data = *((u32 *)(Address)))
-
-/***************** 32 bit register globals  **************/
-
-/*  offsets for 32-bit memory mapped registers */
-
-#define EVEN_DMA_START		0x000
-#define ODD_DMA_START		0x00C
-#define EVEN_DMA_STRIDE		0x018
-#define ODD_DMA_STRIDE		0x024
-#define EVEN_PIXEL_FMT		0x030
-#define ODD_PIXEL_FMT		0x034
-#define FIFO_TRIGGER		0x038
-#define XFER_MODE		0x03C
-#define CSR1			0x040
-#define RETRY_WAIT_CNT		0x044
-#define INT_CSR			0x048
-#define EVEN_FLD_MASK		0x04C
-#define ODD_FLD_MASK		0x050
-#define MASK_LENGTH		0x054
-#define FIFO_FLAG_CNT		0x058
-#define IIC_CLK_DUR		0x05C
-#define IIC_CSR1		0x060
-#define IIC_CSR2		0x064
-#define EVEN_DMA_UPPR_LMT	0x08C
-#define ODD_DMA_UPPR_LMT	0x090
-
-#define CLK_DUR_VAL		0x01010101
-
-
-
-/******** Assignments and Typedefs for 32 bit Memory Mapped Registers ********/
-
-typedef union fifo_trigger_tag {
-	u32   reg;
-	struct {
-		u32 PACKED:6;
-		u32       :9;
-		u32 PLANER:7;
-		u32       :9;
-	} fld;
-} FIFO_TRIGGER_R;
-
-typedef union xfer_mode_tag {
-	u32   reg;
-	struct {
-		u32             :2;
-		u32 FIELD_TOGGLE:1;
-		u32             :5;
-		u32             :2;
-		u32             :22;
-	} fld;
-} XFER_MODE_R;
-
-typedef union csr1_tag {
-	u32   reg;
-	struct {
-		u32 CAP_CONT_EVE:1;
-		u32 CAP_CONT_ODD:1;
-		u32 CAP_SNGL_EVE:1;
-		u32 CAP_SNGL_ODD:1;
-		u32 FLD_DN_EVE  :1;
-		u32 FLD_DN_ODD  :1;
-		u32 SRST        :1;
-		u32 FIFO_EN     :1;
-		u32 FLD_CRPT_EVE:1;
-		u32 FLD_CRPT_ODD:1;
-		u32 ADDR_ERR_EVE:1;
-		u32 ADDR_ERR_ODD:1;
-		u32 CRPT_DIS    :1;
-		u32 RANGE_EN    :1;
-		u32             :16;
-	} fld;
-} CSR1_R;
-
-typedef union retry_wait_cnt_tag {
-	u32   reg;
-	struct {
-		u32 RTRY_WAIT_CNT:8;
-		u32              :24;
-	} fld;
-} RETRY_WAIT_CNT_R;
-
-typedef union int_csr_tag {
-	u32   reg;
-	struct {
-		u32 FLD_END_EVE   :1;
-		u32 FLD_END_ODD   :1;
-		u32 FLD_START     :1;
-		u32               :5;
-		u32 FLD_END_EVE_EN:1;
-		u32 FLD_END_ODD_EN:1;
-		u32 FLD_START_EN  :1;
-		u32               :21;
-	} fld;
-} INT_CSR_R;
-
-typedef union mask_length_tag {
-	u32   reg;
-	struct {
-		u32 MASK_LEN_EVE:5;
-		u32             :11;
-		u32 MASK_LEN_ODD:5;
-		u32             :11;
-	} fld;
-} MASK_LENGTH_R;
-
-typedef union fifo_flag_cnt_tag {
-	u32   reg;
-	struct {
-		u32 AF_COUNT:7;
-		u32         :9;
-		u32 AE_COUNT:7;
-		u32         :9;
-	} fld;
-} FIFO_FLAG_CNT_R;
-
-typedef union iic_clk_dur {
-	u32   reg;
-	struct {
-		u32 PHASE_1:8;
-		u32 PHASE_2:8;
-		u32 PHASE_3:8;
-		u32 PHASE_4:8;
-	} fld;
-} IIC_CLK_DUR_R;
-
-typedef union iic_csr1_tag {
-	u32   reg;
-	struct {
-		u32 AUTO_EN     :1;
-		u32 BYPASS      :1;
-		u32 SDA_OUT     :1;
-		u32 SCL_OUT     :1;
-		u32             :4;
-		u32 AUTO_ABORT  :1;
-		u32 DIRECT_ABORT:1;
-		u32 SDA_IN      :1;
-		u32 SCL_IN      :1;
-		u32             :4;
-		u32 AUTO_ADDR   :8;
-		u32 RD_DATA     :8;
-	} fld;
-} IIC_CSR1_R;
-
-/**********************************
- * iic_csr2_tag
- */
-typedef union iic_csr2_tag {
-	u32   reg;
-	struct {
-		u32 DIR_WR_DATA :8;
-		u32 DIR_SUB_ADDR:8;
-		u32 DIR_RD      :1;
-		u32 DIR_ADDR    :7;
-		u32 NEW_CYCLE   :1;
-		u32             :7;
-	} fld;
-}  IIC_CSR2_R;
-
-/* use for both EVEN and ODD DMA UPPER LIMITS */
-
-/*
- * dma_upper_lmt_tag
- */
-typedef union dma_upper_lmt_tag   {
-	u32 reg;
-	struct {
-		u32 DMA_UPPER_LMT_VAL:24;
-		u32                  :8;
-	} fld;
-} DMA_UPPER_LMT_R;
-
-
-/*
- * Global declarations of local copies of boards' 32 bit registers
- */
-extern u32 even_dma_start_r;		/*  bit 0 should always be 0 */
-extern u32 odd_dma_start_r;		/*               ..          */
-extern u32 even_dma_stride_r;	/*  bits 0&1 should always be 0 */
-extern u32 odd_dma_stride_r;		/*               ..             */
-extern u32 even_pixel_fmt_r;
-extern u32 odd_pixel_fmt_r;
-
-extern FIFO_TRIGGER_R		fifo_trigger_r;
-extern XFER_MODE_R		xfer_mode_r;
-extern CSR1_R			csr1_r;
-extern RETRY_WAIT_CNT_R		retry_wait_cnt_r;
-extern INT_CSR_R		int_csr_r;
-
-extern u32 even_fld_mask_r;
-extern u32 odd_fld_mask_r;
-
-extern MASK_LENGTH_R		mask_length_r;
-extern FIFO_FLAG_CNT_R		fifo_flag_cnt_r;
-extern IIC_CLK_DUR_R		iic_clk_dur_r;
-extern IIC_CSR1_R		iic_csr1_r;
-extern IIC_CSR2_R		iic_csr2_r;
-extern DMA_UPPER_LMT_R		even_dma_upper_lmt_r;
-extern DMA_UPPER_LMT_R		odd_dma_upper_lmt_r;
-
-
-
-/***************** 8 bit I2C register globals  ***********/
-#define CSR2		0x010	/* indices of 8-bit I2C mapped reg's*/
-#define EVEN_CSR	0x011
-#define ODD_CSR		0x012
-#define CONFIG		0x013
-#define DT_ID		0x01F
-#define X_CLIP_START	0x020
-#define Y_CLIP_START	0x022
-#define X_CLIP_END	0x024
-#define Y_CLIP_END	0x026
-#define AD_ADDR		0x030
-#define AD_LUT		0x031
-#define AD_CMD		0x032
-#define DIG_OUT		0x040
-#define PM_LUT_ADDR	0x050
-#define PM_LUT_DATA	0x051
-
-
-/******** Assignments and Typedefs for 8 bit I2C Registers********************/
-
-typedef union i2c_csr2_tag {
-	u8 reg;
-	struct {
-		u8 CHROM_FIL:1;
-		u8 SYNC_SNTL:1;
-		u8 HZ50:1;
-		u8 SYNC_PRESENT:1;
-		u8 BUSY_EVE:1;
-		u8 BUSY_ODD:1;
-		u8 DISP_PASS:1;
-	} fld;
-} I2C_CSR2;
-
-typedef union i2c_even_csr_tag {
-	u8    reg;
-	struct {
-		u8 DONE_EVE :1;
-		u8 SNGL_EVE :1;
-		u8 ERROR_EVE:1;
-		u8          :5;
-	} fld;
-} I2C_EVEN_CSR;
-
-typedef union i2c_odd_csr_tag {
-	u8 reg;
-	struct {
-		u8 DONE_ODD:1;
-		u8 SNGL_ODD:1;
-		u8 ERROR_ODD:1;
-		u8 :5;
-	} fld;
-} I2C_ODD_CSR;
-
-typedef union i2c_config_tag {
-	u8 reg;
-	struct {
-		u8 ACQ_MODE:2;
-		u8 EXT_TRIG_EN:1;
-		u8 EXT_TRIG_POL:1;
-		u8 H_SCALE:1;
-		u8 CLIP:1;
-		u8 PM_LUT_SEL:1;
-		u8 PM_LUT_PGM:1;
-	} fld;
-} I2C_CONFIG;
-
-
-typedef union i2c_ad_cmd_tag {
-	/* bits can have 3 different meanings depending on value of AD_ADDR */
-	u8 reg;
-	/* Bt252 Command Register if AD_ADDR = 00h */
-	struct {
-		u8             :2;
-		u8 SYNC_LVL_SEL:2;
-		u8 SYNC_CNL_SEL:2;
-		u8 DIGITIZE_CNL_SEL1:2;
-		} bt252_command;
-
-	/* Bt252 IOUT0 register if AD_ADDR = 01h */
-	struct {
-		u8 IOUT_DATA:8;
-	} bt252_iout0;
-
-	/* BT252 IOUT1 register if AD_ADDR = 02h */
-	struct {
-		u8 IOUT_DATA:8;
-	} bt252_iout1;
-} I2C_AD_CMD;
-
-
-/***** Global declarations of local copies of boards' 8 bit I2C registers ***/
-
-extern I2C_CSR2			i2c_csr2;
-extern I2C_EVEN_CSR		i2c_even_csr;
-extern I2C_ODD_CSR		i2c_odd_csr;
-extern I2C_CONFIG		i2c_config;
-extern u8			i2c_dt_id;
-extern u8			i2c_x_clip_start;
-extern u8			i2c_y_clip_start;
-extern u8			i2c_x_clip_end;
-extern u8			i2c_y_clip_end;
-extern u8			i2c_ad_addr;
-extern u8			i2c_ad_lut;
-extern I2C_AD_CMD		i2c_ad_cmd;
-extern u8			i2c_dig_out;
-extern u8			i2c_pm_lut_addr;
-extern u8			i2c_pm_lut_data;
-
-/* Functions for Global use */
-
-/* access 8-bit IIC registers */
-
-extern int ReadI2C(u8 *lpReg, u_short wIregIndex, u8 *byVal);
-extern int WriteI2C(u8 *lpReg, u_short wIregIndex, u8 byVal);
-
-#endif
diff --git a/drivers/staging/dt3155/dt3155_isr.c b/drivers/staging/dt3155/dt3155_isr.c
deleted file mode 100644
index 33ddc9c057f..00000000000
--- a/drivers/staging/dt3155/dt3155_isr.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
-
-Copyright 1996,2002,2005 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-				Jason Lapenta, Scott Smedley, Greg Sharp
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-
-   File: dt3155_isr.c
-Purpose: Buffer management routines, and other routines for the ISR
-		(the actual isr is in dt3155_drv.c)
-
--- Changes --
-
-  Date       Programmer  Description of changes made
-  -------------------------------------------------------------------
-  03-Jul-2000 JML       n/a
-  02-Apr-2002 SS        Mods to make work with separate allocator
-			module; Merged John Roll's mods to make work with
-			multiple boards.
-  10-Jul-2002 GCS       Complete rewrite of setup_buffers to disallow
-			buffers which span a 4MB boundary.
-  24-Jul-2002 SS        GPL licence.
-  30-Jul-2002 NJC       Added support for buffer loop.
-  31-Jul-2002 NJC       Complete rewrite of buffer management
-  02-Aug-2002 NJC       Including slab.h instead of malloc.h (no warning).
-			Also, allocator_init() now returns allocator_max
-			so cleaned up allocate_buffers() accordingly.
-  08-Aug-2005 SS        port to 2.6 kernel.
-
-*/
-
-#include <asm/system.h>
-#include <linux/gfp.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-
-#include "dt3155.h"
-#include "dt3155_drv.h"
-#include "dt3155_io.h"
-#include "dt3155_isr.h"
-#include "allocator.h"
-
-#define FOUR_MB         (0x0400000)  /* Can't DMA accross a 4MB boundary!*/
-#define UPPER_10_BITS   (0x3FF<<22)  /* Can't DMA accross a 4MB boundary!*/
-
-
-/* Pointer into global structure for handling buffers */
-struct dt3155_fbuffer *dt3155_fbuffer[MAXBOARDS] = {NULL
-#if MAXBOARDS == 2
-						      , NULL
-#endif
-};
-
-/******************************************************************************
- * Simple array based que struct
- *
- * Some handy functions using the buffering structure.
- *****************************************************************************/
-
-
-/***************************
- * are_empty_buffers
- * m is minor # of device
- ***************************/
-bool are_empty_buffers(int m)
-{
-  return dt3155_fbuffer[m]->empty_len;
-}
-
-/**************************
- * push_empty
- * m is minor # of device
- *
- * This is slightly confusing.  The number empty_len is the literal #
- * of empty buffers.  After calling, empty_len-1 is the index into the
- * empty buffer stack.  So, if empty_len == 1, there is one empty buffer,
- * given by dt3155_fbuffer[m]->empty_buffers[0].
- * empty_buffers should never fill up, though this is not checked.
- **************************/
-void push_empty(int index, int m)
-{
-  dt3155_fbuffer[m]->empty_buffers[dt3155_fbuffer[m]->empty_len] = index;
-  dt3155_fbuffer[m]->empty_len++;
-}
-
-/**************************
- * pop_empty(m)
- * m is minor # of device
- **************************/
-int pop_empty(int m)
-{
-  dt3155_fbuffer[m]->empty_len--;
-  return dt3155_fbuffer[m]->empty_buffers[dt3155_fbuffer[m]->empty_len];
-}
-
-/*************************
- * is_ready_buf_empty(m)
- * m is minor # of device
- *************************/
-bool is_ready_buf_empty(int m)
-{
-  return ((dt3155_fbuffer[m]->ready_len) == 0);
-}
-
-/*************************
- * is_ready_buf_full(m)
- * m is minor # of device
- * this should *never* be true if there are any active, locked or empty
- * buffers, since it corresponds to nbuffers ready buffers!!
- * 7/31/02: total rewrite. --NJC
- *************************/
-bool is_ready_buf_full(int m)
-{
-  return dt3155_fbuffer[m]->ready_len == dt3155_fbuffer[m]->nbuffers;
-}
-
-/*****************************************************
- * push_ready(m, buffer)
- * m is minor # of device
- *
- *****************************************************/
-void push_ready(int m, int index)
-{
-  int head = dt3155_fbuffer[m]->ready_head;
-
-  dt3155_fbuffer[m]->ready_que[head] = index;
-  dt3155_fbuffer[m]->ready_head = ((head + 1) %
-				      (dt3155_fbuffer[m]->nbuffers));
-  dt3155_fbuffer[m]->ready_len++;
-
-}
-
-/*****************************************************
- * get_tail()
- * m is minor # of device
- *
- * Simply comptutes the tail given the head and the length.
- *****************************************************/
-static int get_tail(int m)
-{
-  return (dt3155_fbuffer[m]->ready_head -
-	   dt3155_fbuffer[m]->ready_len +
-	   dt3155_fbuffer[m]->nbuffers)%
-	  (dt3155_fbuffer[m]->nbuffers);
-}
-
-
-
-/*****************************************************
- * pop_ready()
- * m is minor # of device
- *
- * This assumes that there is a ready buffer ready... should
- * be checked (e.g. with is_ready_buf_empty()  prior to call.
- *****************************************************/
-int pop_ready(int m)
-{
-  int tail;
-  tail = get_tail(m);
-  dt3155_fbuffer[m]->ready_len--;
-  return dt3155_fbuffer[m]->ready_que[tail];
-}
-
-
-/*****************************************************
- * printques
- * m is minor # of device
- *****************************************************/
-void printques(int m)
-{
-  int head = dt3155_fbuffer[m]->ready_head;
-  int tail;
-  int num = dt3155_fbuffer[m]->nbuffers;
-  int frame_index;
-  int index;
-
-  tail = get_tail(m);
-
-  printk("\n R:");
-    for (index = tail; index != head; index++, index = index % (num)) {
-	frame_index = dt3155_fbuffer[m]->ready_que[index];
-	printk(" %d ", frame_index);
-    }
-
-  printk("\n E:");
-    for (index = 0; index < dt3155_fbuffer[m]->empty_len; index++) {
-	frame_index = dt3155_fbuffer[m]->empty_buffers[index];
-	printk(" %d ", frame_index);
-    }
-
-  frame_index = dt3155_fbuffer[m]->active_buf;
-  printk("\n A: %d", frame_index);
-
-  frame_index = dt3155_fbuffer[m]->locked_buf;
-  printk("\n L: %d\n", frame_index);
-
-}
-
-/*****************************************************
- * adjust_4MB
- *
- *  If a buffer intersects the 4MB boundary, push
- *  the start address up to the beginning of the
- *  next 4MB chunk (assuming bufsize < 4MB).
- *****************************************************/
-u32 adjust_4MB(u32 buf_addr, u32 bufsize)
-{
-    if (((buf_addr+bufsize) & UPPER_10_BITS) != (buf_addr & UPPER_10_BITS))
-	return (buf_addr+bufsize) & UPPER_10_BITS;
-    else
-	return buf_addr;
-}
-
-
-/*****************************************************
- * allocate_buffers
- *
- *  Try to allocate enough memory for all requested
- *  buffers.  If there is not enough free space
- *  try for less memory.
- *****************************************************/
-void allocate_buffers(u32 *buf_addr, u32* total_size_kbs,
-		       u32 bufsize)
-{
-  /* Compute the minimum amount of memory guaranteed to hold all
-     MAXBUFFERS such that no buffer crosses the 4MB boundary.
-     Store this value in the variable "full_size" */
-
-  u32 allocator_max;
-  u32 bufs_per_chunk = (FOUR_MB / bufsize);
-  u32 filled_chunks = (MAXBUFFERS-1) / bufs_per_chunk;
-  u32 leftover_bufs = MAXBUFFERS - filled_chunks * bufs_per_chunk;
-
-  u32 full_size = bufsize      /* possibly unusable part of 1st chunk */
-    + filled_chunks * FOUR_MB   /* max # of completely filled 4mb chunks */
-    + leftover_bufs * bufsize;  /* these buffs will be in a partly filled
-				   chunk at beginning or end */
-
-  u32 full_size_kbs = 1 + (full_size-1) / 1024;
-  u32 min_size_kbs = 2*ndevices*bufsize / 1024;
-  u32 size_kbs;
-
-  /* Now, try to allocate full_size.  If this fails, keep trying for
-     less & less memory until it succeeds. */
-#ifndef STANDALONE_ALLOCATOR
-  /* initialize the allocator            */
-  allocator_init(&allocator_max);
-#endif
-  size_kbs = full_size_kbs;
-  *buf_addr = 0;
-  printk("DT3155: We would like to get: %d KB\n", full_size_kbs);
-  printk("DT3155: ...but need at least: %d KB\n", min_size_kbs);
-  printk("DT3155: ...the allocator has: %d KB\n", allocator_max);
-  size_kbs = (full_size_kbs <= allocator_max ? full_size_kbs : allocator_max);
-    if (size_kbs > min_size_kbs) {
-	if ((*buf_addr = allocator_allocate_dma(size_kbs, GFP_KERNEL)) != 0) {
-		printk("DT3155:  Managed to allocate: %d KB\n", size_kbs);
-		*total_size_kbs = size_kbs;
-		return;
-	}
-    }
-  /* If we got here, the allocation failed */
-  printk("DT3155: Allocator failed!\n");
-  *buf_addr = 0;
-  *total_size_kbs = 0;
-  return;
-
-}
-
-
-/*****************************************************
- * dt3155_setup_buffers
- *
- *  setup_buffers just puts the buffering system into
- *  a consistent state before the start of interrupts
- *
- * JML : it looks like all the buffers need to be
- * continuous. So I'm going to try and allocate one
- * continuous buffer.
- *
- * GCS : Fix DMA problems when buffer spans
- * 4MB boundary.  Also, add error checking.  This
- * function will return -ENOMEM when not enough memory.
- *****************************************************/
-u32 dt3155_setup_buffers(u32 *allocatorAddr)
-
-{
-  u32 index;
-  u32 rambuff_addr; /* start of allocation */
-  u32 rambuff_size; /* total size allocated to driver */
-  u32 rambuff_acm;  /* accumlator, keep track of how much
-			  is left after being split up*/
-  u32 rambuff_end;  /* end of rambuff */
-  u32 numbufs;      /* number of useful buffers allocated (per device) */
-  u32 bufsize      = DT3155_MAX_ROWS * DT3155_MAX_COLS;
-  int m;               /* minor # of device, looped for all devs */
-
-  /* zero the fbuffer status and address structure */
-    for (m = 0; m < ndevices; m++) {
-	dt3155_fbuffer[m] = &(dt3155_status[m].fbuffer);
-
-      /* Make sure the buffering variables are consistent */
-      {
-	u8 *ptr = (u8 *) dt3155_fbuffer[m];
-		for (index = 0; index < sizeof(struct dt3155_fbuffer); index++)
-			*(ptr++) = 0;
-      }
-    }
-
-  /* allocate a large contiguous chunk of RAM */
-  allocate_buffers(&rambuff_addr, &rambuff_size, bufsize);
-  printk("DT3155: mem info\n");
-  printk("  - rambuf_addr = 0x%x\n", rambuff_addr);
-  printk("  - length (kb) = %u\n", rambuff_size);
-    if (rambuff_addr == 0) {
-	printk(KERN_INFO
-	    "DT3155: Error setup_buffers() allocator dma failed\n");
-	return -ENOMEM;
-    }
-  *allocatorAddr = rambuff_addr;
-  rambuff_end = rambuff_addr + 1024 * rambuff_size;
-
-  /* after allocation, we need to count how many useful buffers there
-     are so we can give an equal number to each device */
-  rambuff_acm = rambuff_addr;
-    for (index = 0; index < MAXBUFFERS; index++) {
-	rambuff_acm = adjust_4MB(rambuff_acm, bufsize);/*avoid spanning 4MB bdry*/
-	if (rambuff_acm + bufsize > rambuff_end)
-		break;
-	rambuff_acm += bufsize;
-    }
-  /* Following line is OK, will waste buffers if index
-   * not evenly divisible by ndevices -NJC*/
-  numbufs = index / ndevices;
-  printk("  - numbufs = %u\n", numbufs);
-    if (numbufs < 2) {
-	printk(KERN_INFO
-	"DT3155: Error setup_buffers() couldn't allocate 2 bufs/board\n");
-	return -ENOMEM;
-    }
-
-  /* now that we have board memory we spit it up */
-  /* between the boards and the buffers          */
-    rambuff_acm = rambuff_addr;
-    for (m = 0; m < ndevices; m++) {
-	rambuff_acm = adjust_4MB(rambuff_acm, bufsize);
-
-	/* Save the start of this boards buffer space (for mmap).  */
-	dt3155_status[m].mem_addr = rambuff_acm;
-
-	for (index = 0; index < numbufs; index++) {
-		rambuff_acm = adjust_4MB(rambuff_acm, bufsize);
-		if (rambuff_acm + bufsize > rambuff_end) {
-			/* Should never happen */
-			printk("DT3155 PROGRAM ERROR (GCS)\n"
-			"Error distributing allocated buffers\n");
-			return -ENOMEM;
-		}
-
-		dt3155_fbuffer[m]->frame_info[index].addr = rambuff_acm;
-		push_empty(index, m);
-		/* printk("  - Buffer : %lx\n",
-		* dt3155_fbuffer[m]->frame_info[index].addr);
-		*/
-		dt3155_fbuffer[m]->nbuffers += 1;
-		rambuff_acm += bufsize;
-	}
-
-	/* Make sure there is an active buffer there. */
-	dt3155_fbuffer[m]->active_buf    = pop_empty(m);
-	dt3155_fbuffer[m]->even_happened = 0;
-	dt3155_fbuffer[m]->even_stopped  = 0;
-
-	/* make sure there is no locked_buf JML 2/28/00 */
-	dt3155_fbuffer[m]->locked_buf = -1;
-
-	dt3155_status[m].mem_size =
-	rambuff_acm - dt3155_status[m].mem_addr;
-
-	/* setup the ready queue */
-	dt3155_fbuffer[m]->ready_head = 0;
-	dt3155_fbuffer[m]->ready_len = 0;
-	printk("Available buffers for device %d: %d\n",
-	    m, dt3155_fbuffer[m]->nbuffers);
-    }
-
-    return 1;
-}
-
-/*****************************************************
- * internal_release_locked_buffer
- *
- * The internal function for releasing a locked buffer.
- * It assumes interrupts are turned off.
- *
- * m is minor number of device
- *****************************************************/
-static void internal_release_locked_buffer(int m)
-{
-  /* Pointer into global structure for handling buffers */
-    if (dt3155_fbuffer[m]->locked_buf >= 0) {
-	push_empty(dt3155_fbuffer[m]->locked_buf, m);
-	dt3155_fbuffer[m]->locked_buf = -1;
-    }
-}
-
-
-/*****************************************************
- * dt3155_release_locked_buffer()
- * m is minor # of device
- *
- * The user function of the above.
- *
- *****************************************************/
-void dt3155_release_locked_buffer(int m)
-{
-	unsigned long int flags;
-	local_save_flags(flags);
-	local_irq_disable();
-	internal_release_locked_buffer(m);
-	local_irq_restore(flags);
-}
-
-
-/*****************************************************
- * dt3155_flush()
- * m is minor # of device
- *
- *****************************************************/
-int dt3155_flush(int m)
-{
-  int index;
-  unsigned long int flags;
-  local_save_flags(flags);
-  local_irq_disable();
-
-  internal_release_locked_buffer(m);
-  dt3155_fbuffer[m]->empty_len = 0;
-
-    for (index = 0; index < dt3155_fbuffer[m]->nbuffers; index++)
-	push_empty(index,  m);
-
-  /* Make sure there is an active buffer there. */
-  dt3155_fbuffer[m]->active_buf = pop_empty(m);
-
-  dt3155_fbuffer[m]->even_happened = 0;
-  dt3155_fbuffer[m]->even_stopped  = 0;
-
-  /* setup the ready queue  */
-  dt3155_fbuffer[m]->ready_head = 0;
-  dt3155_fbuffer[m]->ready_len = 0;
-
-  local_irq_restore(flags);
-
-  return 0;
-}
-
-/*****************************************************
- * dt3155_get_ready_buffer()
- * m is minor # of device
- *
- * get_ready_buffer will grab the next chunk of data
- * if it is already there, otherwise it returns 0.
- * If the user has a buffer locked it will unlock
- * that buffer before returning the new one.
- *****************************************************/
-int dt3155_get_ready_buffer(int m)
-{
-  int frame_index;
-  unsigned long int flags;
-  local_save_flags(flags);
-  local_irq_disable();
-
-#ifdef DEBUG_QUES_A
-  printques(m);
-#endif
-
-  internal_release_locked_buffer(m);
-
-    if (is_ready_buf_empty(m))
-	frame_index = -1;
-    else {
-	frame_index = pop_ready(m);
-	dt3155_fbuffer[m]->locked_buf = frame_index;
-    }
-
-#ifdef DEBUG_QUES_B
-  printques(m);
-#endif
-
-  local_irq_restore(flags);
-
-  return frame_index;
-}
diff --git a/drivers/staging/dt3155/dt3155_isr.h b/drivers/staging/dt3155/dt3155_isr.h
deleted file mode 100644
index 7d474cf743d..00000000000
--- a/drivers/staging/dt3155/dt3155_isr.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
-
-Copyright 1996,2002 Gregory D. Hager, Alfred A. Rizzi, Noah J. Cowan,
-		    Jason Lapenta, Scott Smedley
-
-This file is part of the DT3155 Device Driver.
-
-The DT3155 Device Driver is free software; you can redistribute it
-and/or modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The DT3155 Device Driver is distributed in the hope that it will be
-useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with the DT3155 Device Driver; if not, write to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-MA 02111-1307 USA
-
-
--- Changes --
-
-  Date     Programmer   Description of changes made
-  -------------------------------------------------------------------
-  03-Jul-2000 JML       n/a
-  24-Jul-2002 SS        GPL licence.
-  26-Oct-2009 SS	Porting to 2.6.30 kernel.
-
--- notes --
-
-*/
-
-#ifndef DT3155_ISR_H
-#define DT3155_ISR_H
-
-extern struct dt3155_fbuffer *dt3155_fbuffer[MAXBOARDS];
-
-/* User functions for buffering */
-/* Initialize the buffering system.  This should */
-/* be called prior to enabling interrupts */
-
-u32 dt3155_setup_buffers(u32 *allocatorAddr);
-
-/* Get the next frame of data if it is ready.  Returns */
-/* zero if no data is ready.  If there is data but */
-/* the user has a locked buffer, it will unlock that */
-/* buffer and return it to the free list. */
-
-int dt3155_get_ready_buffer(int minor);
-
-/* Return a locked buffer to the free list */
-
-void dt3155_release_locked_buffer(int minor);
-
-/* Flush the buffer system */
-int dt3155_flush(int minor);
-
-/**********************************
- * Simple array based que struct
- **********************************/
-
-bool are_empty_buffers(int minor);
-void push_empty(int index, int minor);
-
-int  pop_empty(int minor);
-
-bool is_ready_buf_empty(int minor);
-bool is_ready_buf_full(int minor);
-
-void push_ready(int minor, int index);
-int  pop_ready(int minor);
-
-
-#endif
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/dt3155v4l/dt3155v4l.c
index 6dc3af62284..fd48b38e797 100644
--- a/drivers/staging/dt3155v4l/dt3155v4l.c
+++ b/drivers/staging/dt3155v4l/dt3155v4l.c
@@ -1008,6 +1008,8 @@ struct dma_coherent_mem {
 static int __devinit
 dt3155_alloc_coherent(struct device *dev, size_t size, int flags)
 {
+	struct dma_coherent_mem *mem;
+	dma_addr_t dev_base;
 	int pages = size >> PAGE_SHIFT;
 	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
 
@@ -1018,25 +1020,28 @@ dt3155_alloc_coherent(struct device *dev, size_t size, int flags)
 	if (dev->dma_mem)
 		goto out;
 
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
+	mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+	if (!mem)
 		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
+	mem->virt_base = dma_alloc_coherent(dev, size, &dev_base,
+							DT3155_COH_FLAGS);
+	if (!mem->virt_base)
+		goto err_alloc_coherent;
+	mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!mem->bitmap)
 		goto err_bitmap;
 
-	dev->dma_mem->virt_base = dma_alloc_coherent(dev, size,
-				&dev->dma_mem->device_base, DT3155_COH_FLAGS);
-	if (!dev->dma_mem->virt_base)
-		goto err_coherent;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
+	/* coherent_dma_mask is already set to 32 bits */
+	mem->device_base = dev_base;
+	mem->size = pages;
+	mem->flags = flags;
+	dev->dma_mem = mem;
 	return DMA_MEMORY_MAP;
 
-err_coherent:
-	kfree(dev->dma_mem->bitmap);
 err_bitmap:
-	kfree(dev->dma_mem);
+	dma_free_coherent(dev, size, mem->virt_base, dev_base);
+err_alloc_coherent:
+	kfree(mem);
 out:
 	return 0;
 }
diff --git a/drivers/staging/easycap/Kconfig b/drivers/staging/easycap/Kconfig
new file mode 100644
index 00000000000..bd96f39f273
--- /dev/null
+++ b/drivers/staging/easycap/Kconfig
@@ -0,0 +1,17 @@
+config EASYCAP
+	tristate "EasyCAP USB ID 05e1:0408 support"
+	depends on USB && VIDEO_DEV
+
+	---help---
+	  This is an integrated audio/video driver for EasyCAP cards with
+	  USB ID 05e1:0408.  It supports two hardware variants:
+
+	  *  EasyCAP USB 2.0 Video Adapter with Audio, Model DC60,
+	     having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
+
+	  *  EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled
+	     1, 2, 3, 4 and an unlabelled input cable for a microphone.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called easycap
+
diff --git a/drivers/staging/easycap/Makefile b/drivers/staging/easycap/Makefile
new file mode 100644
index 00000000000..d93bd6b70a4
--- /dev/null
+++ b/drivers/staging/easycap/Makefile
@@ -0,0 +1,13 @@
+
+obj-$(CONFIG_EASYCAP)	+= easycap.o
+
+easycap-objs	:= easycap_main.o easycap_low.o easycap_sound.o
+easycap-objs	+= easycap_ioctl.o easycap_settings.o
+easycap-objs	+= easycap_testcard.o
+
+EXTRA_CFLAGS += -Wall
+# Impose all or none of the following:
+EXTRA_CFLAGS += -DEASYCAP_IS_VIDEODEV_CLIENT
+EXTRA_CFLAGS += -DEASYCAP_NEEDS_V4L2_DEVICE_H
+EXTRA_CFLAGS += -DEASYCAP_NEEDS_V4L2_FOPS
+
diff --git a/drivers/staging/easycap/README b/drivers/staging/easycap/README
new file mode 100644
index 00000000000..3775481f05e
--- /dev/null
+++ b/drivers/staging/easycap/README
@@ -0,0 +1,130 @@
+
+        ***********************************************************
+        *   EasyCAP USB 2.0 Video Adapter with Audio, Model DC60  *
+        *                            and                          *
+        *             EasyCAP002 4-Channel USB 2.0 DVR            *
+        ***********************************************************
+                     Mike Thomas  <rmthomas@sciolus.org>
+
+
+
+SUPPORTED HARDWARE
+------------------
+
+This driver is intended for use with hardware having USB ID 05e1:0408.
+Two kinds of EasyCAP have this USB ID, namely:
+
+    *  EasyCAP USB 2.0 Video Adapter with Audio, Model DC60,
+       having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
+
+    *  EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled
+       1, 2, 3, 4 and an unlabelled input cable for a microphone.
+
+
+BUILD OPTIONS AND DEPENDENCIES
+------------------------------
+
+If the parameter EASYCAP_IS_VIDEODEV_CLIENT is undefined during compilation
+the built module is entirely independent of the videodev module, and when
+the EasyCAP is physically plugged into a USB port the special files
+/dev/easycap0 and /dev/easysnd1 are created as video and sound sources
+respectively.
+
+If the parameter EASYCAP_IS_VIDEODEV_CLIENT is defined during compilation
+the built easycap module is configured to register with the videodev module,
+in which case the special files created when the EasyCAP is plugged in are
+/dev/video0 and /dev/easysnd0.  Use of the easycap module as a client of
+the videodev module has received very little testing as of June 2010.
+
+
+KNOWN BUILD PROBLEMS
+--------------------
+
+(1) Recent gcc versions may generate the message:
+
+     warning: the frame size of .... bytes is larger than 1024 bytes
+
+This warning can be suppressed by specifying in the Makefile:
+
+     EXTRA_CFLAGS += -Wframe-larger-than=8192
+
+but it would be preferable to remove the cause of the warning.
+
+
+KNOWN RUNTIME ISSUES
+--------------------
+
+(1) Randomly (maybe 5 to 10% of occasions) the driver fails to produce any
+output at start-up.  Closing mplayer (or whatever the user program is) and
+restarting it restores normal performance without any other remedial action
+being necessary.  The reason for this is not known.
+
+(2) Intentionally, this driver will not stream material which is unambiguously
+identified by the hardware as copy-protected.  The video output will freeze
+within about a minute when this situation arises.
+
+(3) The controls for luminance, contrast, saturation, hue and volume may not
+always work properly.
+
+(4) Reduced-resolution S-Video seems to suffer from moire artefacts.  No
+attempt has yet been made to rememdy this.
+
+
+SUPPORTED TV STANDARDS AND RESOLUTIONS
+--------------------------------------
+
+The following TV standards are natively supported by the hardware and are
+usable as (for example) the "norm=" parameter in the mplayer command:
+
+    PAL_BGHIN,    NTSC_N_443,
+    PAL_Nc,       NTSC_N,
+    SECAM,        NTSC_M,        NTSC_M_JP,
+    PAL_60,       NTSC_443,
+    PAL_M.
+
+The available picture sizes are:
+
+     at 25 frames per second:   720x576, 704x576, 640x480, 360x288, 320x240;
+     at 30 frames per second:   720x480, 640x480, 360x240, 320x240;
+
+
+WHAT'S TESTED AND WHAT'S NOT
+----------------------------
+
+This driver is known to work with mplayer, mencoder, tvtime and sufficiently
+recent versions of vlc.  An interface to ffmpeg is implemented, but serious
+audio-video synchronization problems remain.
+
+The driver is designed to support all the TV standards accepted by the
+hardware, but as yet it has actually been tested on only a few of these.
+
+I have been unable to test and calibrate the S-video input myself because I
+do not possess any equipment with S-video output.
+
+This driver does not understand the V4L1 IOCTL commands, so programs such
+as camorama are not compatible.  There are reports that the driver does
+work with sufficiently recent (V4L2) versions of zoneminder, but I have not
+attempted to confirm this myself.
+
+
+UDEV RULES
+----------
+
+In order that the special files /dev/easycap0 and /dev/easysnd1 are created
+with conveniently relaxed permissions when the EasyCAP is plugged in, a file
+is preferably to be provided in directory /etc/udev/rules.d with content:
+
+ACTION!="add|change", GOTO="easycap_rules_end"
+ATTRS{idVendor}=="05e1", ATTRS{idProduct}=="0408", \
+	MODE="0666", OWNER="root", GROUP="root"
+LABEL="easycap_rules_end"
+
+
+ACKNOWLEGEMENTS AND REFERENCES
+------------------------------
+This driver makes use of information contained in the Syntek Semicon DC-1125
+Driver, presently maintained at http://sourceforge.net/projects/syntekdriver/
+by Nicolas Vivien.  Particularly useful has been a patch to the latter driver
+provided by Ivor Hewitt in January 2009.  The NTSC implementation is taken
+from the work of Ben Trask.
+
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
new file mode 100644
index 00000000000..ad836d2d26f
--- /dev/null
+++ b/drivers/staging/easycap/easycap.h
@@ -0,0 +1,642 @@
+/*****************************************************************************
+*                                                                            *
+*  easycap.h                                                                 *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE FOLLOWING PARAMETERS ARE UNDEFINED:
+ *
+ *                EASYCAP_DEBUG
+ *                EASYCAP_IS_VIDEODEV_CLIENT
+ *                EASYCAP_NEEDS_USBVIDEO_H
+ *                EASYCAP_NEEDS_V4L2_DEVICE_H
+ *                EASYCAP_NEEDS_V4L2_FOPS
+ *
+ *  IF REQUIRED THEY MUST BE EXTERNALLY DEFINED, FOR EXAMPLE AS COMPILER
+ *  OPTIONS.
+ */
+/*---------------------------------------------------------------------------*/
+
+#if (!defined(EASYCAP_H))
+#define EASYCAP_H
+
+#if defined(EASYCAP_DEBUG)
+#if (9 < EASYCAP_DEBUG)
+#error Debug levels 0 to 9 are okay.\
+  To achieve higher levels, remove this trap manually from easycap.h
+#endif
+#endif /*EASYCAP_DEBUG*/
+/*---------------------------------------------------------------------------*/
+/*
+ *  THESE ARE FOR MAINTENANCE ONLY - NORMALLY UNDEFINED:
+ */
+/*---------------------------------------------------------------------------*/
+#undef  PREFER_NTSC
+#undef  EASYCAP_TESTCARD
+#undef  EASYCAP_TESTTONE
+#undef  LOCKFRAME
+#undef  NOREADBACK
+#undef  AUDIOTIME
+/*---------------------------------------------------------------------------*/
+/*
+ *
+ *  DEFINE   BRIDGER   TO ACTIVATE THE ROUTINE FOR BRIDGING VIDEOTAPE DROPOUTS.
+ *
+ *             *** UNDER DEVELOPMENT/TESTING - NOT READY YET!***
+ *
+ */
+/*---------------------------------------------------------------------------*/
+#undef  BRIDGER
+/*---------------------------------------------------------------------------*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/kref.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+
+#include <linux/i2c.h>
+#include <linux/version.h>
+#include <linux/workqueue.h>
+#include <linux/poll.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+#if (!defined(__OLD_VIDIOC_))
+#define __OLD_VIDIOC_
+#endif /* !defined(__OLD_VIDIOC_) */
+
+#include <media/v4l2-dev.h>
+
+#if defined(EASYCAP_NEEDS_V4L2_DEVICE_H)
+#include <media/v4l2-device.h>
+#endif /*EASYCAP_NEEDS_V4L2_DEVICE_H*/
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
+#if (!defined(__OLD_VIDIOC_))
+#define __OLD_VIDIOC_
+#endif /* !defined(__OLD_VIDIOC_) */
+#include <linux/videodev2.h>
+
+#include <linux/soundcard.h>
+
+#if defined(EASYCAP_NEEDS_USBVIDEO_H)
+#include <config/video/usbvideo.h>
+#endif /*EASYCAP_NEEDS_USBVIDEO_H*/
+
+#if (!defined(PAGE_SIZE))
+#error "PAGE_SIZE not defined"
+#endif
+
+#define STRINGIZE_AGAIN(x) #x
+#define STRINGIZE(x) STRINGIZE_AGAIN(x)
+
+/*---------------------------------------------------------------------------*/
+/*  VENDOR, PRODUCT:  Syntek Semiconductor Co., Ltd
+ *
+ *      EITHER        EasyCAP USB 2.0 Video Adapter with Audio, Model No. DC60
+ *               with input cabling:  AUDIO(L), AUDIO(R), CVBS, S-VIDEO.
+ *
+ *          OR        EasyCAP 4CHANNEL USB 2.0 DVR, Model No. EasyCAP002
+ *               with input cabling:  MICROPHONE, CVBS1, CVBS2, CVBS3, CVBS4.
+ */
+/*---------------------------------------------------------------------------*/
+#define USB_EASYCAP_VENDOR_ID	0x05e1
+#define USB_EASYCAP_PRODUCT_ID	0x0408
+
+#define EASYCAP_DRIVER_VERSION "0.8.21"
+#define EASYCAP_DRIVER_DESCRIPTION "easycapdc60"
+
+#define USB_SKEL_MINOR_BASE     192
+#define VIDEO_DEVICE_MANY 8
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  DEFAULT LUMINANCE, CONTRAST, SATURATION AND HUE
+ */
+/*---------------------------------------------------------------------------*/
+#define SAA_0A_DEFAULT 0x7F
+#define SAA_0B_DEFAULT 0x3F
+#define SAA_0C_DEFAULT 0x2F
+#define SAA_0D_DEFAULT 0x00
+/*---------------------------------------------------------------------------*/
+/*
+ *  VIDEO STREAMING PARAMETERS:
+ *  USB 2.0 PROVIDES FOR HIGH-BANDWIDTH ENDPOINTS WITH AN UPPER LIMIT
+ *  OF 3072 BYTES PER MICROFRAME for wMaxPacketSize.
+ */
+/*---------------------------------------------------------------------------*/
+#define VIDEO_ISOC_BUFFER_MANY 16
+#define VIDEO_ISOC_ORDER 3
+#define VIDEO_ISOC_FRAMESPERDESC ((unsigned int) 1 << VIDEO_ISOC_ORDER)
+#define USB_2_0_MAXPACKETSIZE 3072
+#if (USB_2_0_MAXPACKETSIZE > PAGE_SIZE)
+#error video_isoc_buffer[.] will not be big enough
+#endif
+/*---------------------------------------------------------------------------*/
+/*
+ *  VIDEO BUFFERS
+ */
+/*---------------------------------------------------------------------------*/
+#define FIELD_BUFFER_SIZE (203 * PAGE_SIZE)
+#define FRAME_BUFFER_SIZE (405 * PAGE_SIZE)
+#define FIELD_BUFFER_MANY 4
+#define FRAME_BUFFER_MANY 6
+/*---------------------------------------------------------------------------*/
+/*
+ *  AUDIO STREAMING PARAMETERS
+ */
+/*---------------------------------------------------------------------------*/
+#define AUDIO_ISOC_BUFFER_MANY 16
+#define AUDIO_ISOC_ORDER 3
+#define AUDIO_ISOC_BUFFER_SIZE (PAGE_SIZE << AUDIO_ISOC_ORDER)
+/*---------------------------------------------------------------------------*/
+/*
+ *  AUDIO BUFFERS
+ */
+/*---------------------------------------------------------------------------*/
+#define AUDIO_FRAGMENT_MANY 32
+/*---------------------------------------------------------------------------*/
+/*
+ *  IT IS ESSENTIAL THAT EVEN-NUMBERED STANDARDS ARE 25 FRAMES PER SECOND,
+ *                        ODD-NUMBERED STANDARDS ARE 30 FRAMES PER SECOND.
+ *  THE NUMBERING OF STANDARDS MUST NOT BE CHANGED WITHOUT DUE CARE.  NOT
+ *  ONLY MUST THE PARAMETER
+ *                             STANDARD_MANY
+ *  BE CHANGED TO CORRESPOND TO THE NEW NUMBER OF STANDARDS, BUT ALSO THE
+ *  NUMBERING MUST REMAIN AN UNBROKEN ASCENDING SEQUENCE:  DUMMY STANDARDS
+ *  MAY NEED TO BE ADDED.   APPROPRIATE CHANGES WILL ALWAYS BE REQUIRED IN
+ *  ROUTINE fillin_formats() AND POSSIBLY ELSEWHERE.  BEWARE.
+ */
+/*---------------------------------------------------------------------------*/
+#define  PAL_BGHIN      0
+#define  PAL_Nc         2
+#define  SECAM          4
+#define  NTSC_N         6
+#define  NTSC_N_443     8
+#define  NTSC_M         1
+#define  NTSC_443       3
+#define  NTSC_M_JP      5
+#define  PAL_60         7
+#define  PAL_M          9
+#define  STANDARD_MANY 10
+/*---------------------------------------------------------------------------*/
+/*
+ *  ENUMS
+ */
+/*---------------------------------------------------------------------------*/
+enum {
+AT_720x576,
+AT_704x576,
+AT_640x480,
+AT_720x480,
+AT_360x288,
+AT_320x240,
+AT_360x240,
+RESOLUTION_MANY
+};
+enum {
+FMT_UYVY,
+FMT_YUY2,
+FMT_RGB24,
+FMT_RGB32,
+FMT_BGR24,
+FMT_BGR32,
+PIXELFORMAT_MANY
+};
+enum {
+FIELD_NONE,
+FIELD_INTERLACED,
+FIELD_ALTERNATE,
+INTERLACE_MANY
+};
+#define SETTINGS_MANY	(STANDARD_MANY * \
+			RESOLUTION_MANY * \
+			2 * \
+			PIXELFORMAT_MANY * \
+			INTERLACE_MANY)
+/*---------------------------------------------------------------------------*/
+/*
+ *  STRUCTURE DEFINITIONS
+ */
+/*---------------------------------------------------------------------------*/
+struct data_buffer {
+struct list_head list_head;
+void *pgo;
+void *pto;
+__u16 kount;
+};
+/*---------------------------------------------------------------------------*/
+struct data_urb {
+struct list_head list_head;
+struct urb *purb;
+int isbuf;
+int length;
+};
+/*---------------------------------------------------------------------------*/
+struct easycap_standard {
+__u16 mask;
+struct v4l2_standard v4l2_standard;
+};
+struct easycap_format {
+__u16 mask;
+char name[128];
+struct v4l2_format v4l2_format;
+};
+/*---------------------------------------------------------------------------*/
+/*
+ *   easycap.ilk == 0   =>  CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=256
+ *   easycap.ilk == 2   =>  CVBS+S-VIDEO HARDWARE, AUDIO wMaxPacketSize=9
+ *   easycap.ilk == 3   =>     FOUR-CVBS HARDWARE, AUDIO wMaxPacketSize=9
+ */
+/*---------------------------------------------------------------------------*/
+struct easycap {
+unsigned int audio_pages_per_fragment;
+unsigned int audio_bytes_per_fragment;
+unsigned int audio_buffer_page_many;
+
+#define UPSAMPLE
+#if defined(UPSAMPLE)
+__s16 oldaudio;
+#endif /*UPSAMPLE*/
+
+struct easycap_format easycap_format[1 + SETTINGS_MANY];
+
+int ilk;
+bool microphone;
+
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+struct video_device *pvideo_device;
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
+struct usb_device *pusb_device;
+struct usb_interface *pusb_interface;
+
+struct kref kref;
+
+struct mutex mutex_mmap_video[FRAME_BUFFER_MANY];
+struct mutex mutex_timeval0;
+struct mutex mutex_timeval1;
+
+int queued[FRAME_BUFFER_MANY];
+int done[FRAME_BUFFER_MANY];
+
+wait_queue_head_t wq_video;
+wait_queue_head_t wq_audio;
+
+int input;
+int polled;
+int standard_offset;
+int format_offset;
+
+int fps;
+int usec;
+int tolerate;
+int merit[180];
+
+struct timeval timeval0;
+struct timeval timeval1;
+struct timeval timeval2;
+struct timeval timeval7;
+long long int dnbydt;
+
+int    video_interface;
+int    video_altsetting_on;
+int    video_altsetting_off;
+int    video_endpointnumber;
+int    video_isoc_maxframesize;
+int    video_isoc_buffer_size;
+int    video_isoc_framesperdesc;
+
+int    video_isoc_streaming;
+int    video_isoc_sequence;
+int    video_idle;
+int    video_eof;
+int    video_junk;
+
+int    fudge;
+
+struct data_buffer video_isoc_buffer[VIDEO_ISOC_BUFFER_MANY];
+struct data_buffer \
+	     field_buffer[FIELD_BUFFER_MANY][(FIELD_BUFFER_SIZE/PAGE_SIZE)];
+struct data_buffer \
+	     frame_buffer[FRAME_BUFFER_MANY][(FRAME_BUFFER_SIZE/PAGE_SIZE)];
+
+struct list_head urb_video_head;
+struct list_head *purb_video_head;
+
+int vma_many;
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  BUFFER INDICATORS
+ */
+/*---------------------------------------------------------------------------*/
+int field_fill;		/* Field buffer being filled by easycap_complete().  */
+			/*   Bumped only by easycap_complete().              */
+int field_page;		/* Page of field buffer page being filled by         */
+			/*   easycap_complete().                             */
+int field_read;		/* Field buffer to be read by field2frame().         */
+			/*   Bumped only by easycap_complete().              */
+int frame_fill;		/* Frame buffer being filled by field2frame().       */
+			/*   Bumped only by easycap_dqbuf() when             */
+			/*   field2frame() has created a complete frame.     */
+int frame_read;		/* Frame buffer offered to user by DQBUF.            */
+			/*   Set only by easycap_dqbuf() to trail frame_fill.*/
+int frame_lock;		/* Flag set to 1 by DQBUF and cleared by QBUF        */
+/*---------------------------------------------------------------------------*/
+/*
+ *  IMAGE PROPERTIES
+ */
+/*---------------------------------------------------------------------------*/
+__u32                   pixelformat;
+__u32                   field;
+int                     width;
+int                     height;
+int                     bytesperpixel;
+bool                    byteswaporder;
+bool                    decimatepixel;
+bool                    offerfields;
+int                     frame_buffer_used;
+int                     frame_buffer_many;
+int                     videofieldamount;
+
+int                     brightness;
+int                     contrast;
+int                     saturation;
+int                     hue;
+
+int allocation_video_urb;
+int allocation_video_page;
+int allocation_video_struct;
+int registered_video;
+/*---------------------------------------------------------------------------*/
+/*
+ *  SOUND PROPERTIES
+ */
+/*---------------------------------------------------------------------------*/
+int audio_interface;
+int audio_altsetting_on;
+int audio_altsetting_off;
+int audio_endpointnumber;
+int audio_isoc_maxframesize;
+int audio_isoc_buffer_size;
+int audio_isoc_framesperdesc;
+
+int audio_isoc_streaming;
+int audio_idle;
+int audio_eof;
+int volume;
+int mute;
+
+struct data_buffer audio_isoc_buffer[AUDIO_ISOC_BUFFER_MANY];
+
+struct list_head urb_audio_head;
+struct list_head *purb_audio_head;
+/*---------------------------------------------------------------------------*/
+/*
+ *  BUFFER INDICATORS
+ */
+/*---------------------------------------------------------------------------*/
+int audio_fill;		/* Audio buffer being filled by easysnd_complete().  */
+			/*   Bumped only by easysnd_complete().              */
+int audio_read;		/* Audio buffer page being read by easysnd_read().   */
+			/*   Set by easysnd_read() to trail audio_fill by    */
+			/*   one fragment.                                   */
+/*---------------------------------------------------------------------------*/
+/*
+ *  SOUND PROPERTIES
+ */
+/*---------------------------------------------------------------------------*/
+
+int audio_buffer_many;
+
+int allocation_audio_urb;
+int allocation_audio_page;
+int allocation_audio_struct;
+int registered_audio;
+
+long long int audio_sample;
+long long int audio_niveau;
+long long int audio_square;
+
+struct data_buffer audio_buffer[];
+};
+/*---------------------------------------------------------------------------*/
+/*
+ *  VIDEO FUNCTION PROTOTYPES
+ */
+/*---------------------------------------------------------------------------*/
+void             easycap_complete(struct urb *);
+int              easycap_open(struct inode *, struct file *);
+int              easycap_release(struct inode *, struct file *);
+int              easycap_ioctl(struct inode *, struct file *, \
+						unsigned int,  unsigned long);
+
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+int              easycap_open_noinode(struct file *);
+int              easycap_release_noinode(struct file *);
+long             easycap_ioctl_noinode(struct file *, \
+						unsigned int,  unsigned long);
+int              videodev_release(struct video_device *);
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
+unsigned int     easycap_poll(struct file *, poll_table *);
+int              easycap_mmap(struct file *, struct vm_area_struct *);
+int              easycap_usb_probe(struct usb_interface *, \
+						const struct usb_device_id *);
+void             easycap_usb_disconnect(struct usb_interface *);
+void             easycap_delete(struct kref *);
+
+void             easycap_vma_open(struct vm_area_struct *);
+void             easycap_vma_close(struct vm_area_struct *);
+int              easycap_vma_fault(struct vm_area_struct *, struct vm_fault *);
+int              easycap_dqbuf(struct easycap *, int);
+int              submit_video_urbs(struct easycap *);
+int              kill_video_urbs(struct easycap *);
+int              field2frame(struct easycap *);
+int              redaub(struct easycap *, void *, void *, \
+						int, int, __u8, __u8, bool);
+void             debrief(struct easycap *);
+void             sayreadonly(struct easycap *);
+void             easycap_testcard(struct easycap *, int);
+int              explain_ioctl(__u32);
+int              explain_cid(__u32);
+int              fillin_formats(void);
+int              adjust_standard(struct easycap *, v4l2_std_id);
+int              adjust_format(struct easycap *, __u32, __u32, __u32, \
+								int, bool);
+int              adjust_brightness(struct easycap *, int);
+int              adjust_contrast(struct easycap *, int);
+int              adjust_saturation(struct easycap *, int);
+int              adjust_hue(struct easycap *, int);
+int              adjust_volume(struct easycap *, int);
+/*---------------------------------------------------------------------------*/
+/*
+ *  AUDIO FUNCTION PROTOTYPES
+ */
+/*---------------------------------------------------------------------------*/
+void             easysnd_complete(struct urb *);
+ssize_t          easysnd_read(struct file *, char __user *, size_t, loff_t *);
+int              easysnd_open(struct inode *, struct file *);
+int              easysnd_release(struct inode *, struct file *);
+int              easysnd_ioctl(struct inode *, struct file *, \
+						unsigned int,  unsigned long);
+unsigned int     easysnd_poll(struct file *, poll_table *);
+void             easysnd_delete(struct kref *);
+int              submit_audio_urbs(struct easycap *);
+int              kill_audio_urbs(struct easycap *);
+void             easysnd_testtone(struct easycap *, int);
+int              audio_setup(struct easycap *);
+/*---------------------------------------------------------------------------*/
+/*
+ *  LOW-LEVEL FUNCTION PROTOTYPES
+ */
+/*---------------------------------------------------------------------------*/
+int              audio_gainget(struct usb_device *);
+int              audio_gainset(struct usb_device *, __s8);
+
+int              set_interface(struct usb_device *, __u16);
+int              wakeup_device(struct usb_device *);
+int              confirm_resolution(struct usb_device *);
+int              confirm_stream(struct usb_device *);
+
+int              setup_stk(struct usb_device *);
+int              setup_saa(struct usb_device *);
+int              setup_vt(struct usb_device *);
+int              check_stk(struct usb_device *);
+int              check_saa(struct usb_device *);
+int              ready_saa(struct usb_device *);
+int              merit_saa(struct usb_device *);
+int              check_vt(struct usb_device *);
+int              select_input(struct usb_device *, int, int);
+int              set_resolution(struct usb_device *, \
+						__u16, __u16, __u16, __u16);
+
+int              read_saa(struct usb_device *, __u16);
+int              read_stk(struct usb_device *, __u32);
+int              write_saa(struct usb_device *, __u16, __u16);
+int              wait_i2c(struct usb_device *);
+int              write_000(struct usb_device *, __u16, __u16);
+int              start_100(struct usb_device *);
+int              stop_100(struct usb_device *);
+int              write_300(struct usb_device *);
+int              read_vt(struct usb_device *, __u16);
+int              write_vt(struct usb_device *, __u16, __u16);
+
+int              set2to78(struct usb_device *);
+int              set2to93(struct usb_device *);
+
+int              regset(struct usb_device *, __u16, __u16);
+int              regget(struct usb_device *, __u16, void *);
+/*---------------------------------------------------------------------------*/
+struct signed_div_result {
+long long int quotient;
+unsigned long long int remainder;
+} signed_div(long long int, long long int);
+/*---------------------------------------------------------------------------*/
+/*
+ *  MACROS
+ */
+/*---------------------------------------------------------------------------*/
+#define GET(X, Y, Z) do { \
+	int rc; \
+	*(Z) = (__u16)0; \
+	rc = regget(X, Y, Z); \
+	if (0 > rc) { \
+		JOT(8, ":-(%i\n", __LINE__);  return(rc); \
+	} \
+} while (0)
+
+#define SET(X, Y, Z) do { \
+	int rc; \
+	rc = regset(X, Y, Z); \
+	if (0 > rc) { \
+		JOT(8, ":-(%i\n", __LINE__);  return(rc); \
+	} \
+} while (0)
+/*---------------------------------------------------------------------------*/
+
+#define SAY(format, args...) do { \
+	printk(KERN_DEBUG "easycap: %s: " format, __func__, ##args); \
+} while (0)
+
+
+#if defined(EASYCAP_DEBUG)
+#define JOT(n, format, args...) do { \
+	if (n <= easycap_debug) { \
+		printk(KERN_DEBUG "easycap: %s: " format, __func__, ##args); \
+	} \
+} while (0)
+#else
+#define JOT(n, format, args...) do {} while (0)
+#endif /*EASYCAP_DEBUG*/
+
+#define POUT JOT(8, ":-(in file %s line %4i\n", __FILE__, __LINE__)
+
+#define MICROSECONDS(X, Y) \
+			((1000000*((long long int)(X.tv_sec - Y.tv_sec))) + \
+					(long long int)(X.tv_usec - Y.tv_usec))
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  (unsigned char *)P           pointer to next byte pair
+ *       (long int *)X           pointer to accumulating count
+ *       (long int *)Y           pointer to accumulating sum
+ *  (long long int *)Z           pointer to accumulating sum of squares
+ */
+/*---------------------------------------------------------------------------*/
+#define SUMMER(P, X, Y, Z) do {                                 \
+	unsigned char *p;                                    \
+	unsigned int u0, u1, u2;                             \
+	long int s;                                          \
+	p = (unsigned char *)(P);                            \
+	u0 = (unsigned int) (*p);                            \
+	u1 = (unsigned int) (*(p + 1));                      \
+	u2 = (unsigned int) ((u1 << 8) | u0);                \
+	if (0x8000 & u2)                                     \
+		s = -(long int)(0x7FFF & (~u2));             \
+	else                                                 \
+		s =  (long int)(0x7FFF & u2);                \
+	*((X)) += (long int) 1;                              \
+	*((Y)) += (long int) s;                              \
+	*((Z)) += ((long long int)(s) * (long long int)(s)); \
+} while (0)
+/*---------------------------------------------------------------------------*/
+
+#endif /*EASYCAP_H*/
diff --git a/drivers/staging/easycap/easycap_debug.h b/drivers/staging/easycap/easycap_debug.h
new file mode 100644
index 00000000000..1d10d7ea7d6
--- /dev/null
+++ b/drivers/staging/easycap/easycap_debug.h
@@ -0,0 +1,27 @@
+/*****************************************************************************
+*                                                                            *
+*  easycap_debug.h                                                           *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+extern int easycap_debug;
diff --git a/drivers/staging/easycap/easycap_ioctl.c b/drivers/staging/easycap/easycap_ioctl.c
new file mode 100644
index 00000000000..276b63dfe27
--- /dev/null
+++ b/drivers/staging/easycap/easycap_ioctl.c
@@ -0,0 +1,2687 @@
+/******************************************************************************
+*                                                                             *
+*  easycap_ioctl.c                                                            *
+*                                                                             *
+******************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+
+#include "easycap.h"
+#include "easycap_debug.h"
+#include "easycap_standard.h"
+#include "easycap_ioctl.h"
+
+/*--------------------------------------------------------------------------*/
+/*
+ *  UNLESS THERE IS A PREMATURE ERROR RETURN THIS ROUTINE UPDATES THE
+ *  FOLLOWING:
+ *          peasycap->standard_offset
+ *          peasycap->fps
+ *          peasycap->usec
+ *          peasycap->tolerate
+ */
+/*---------------------------------------------------------------------------*/
+int adjust_standard(struct easycap *peasycap, v4l2_std_id std_id)
+{
+struct easycap_standard const *peasycap_standard;
+__u16 reg, set;
+int ir, rc, need;
+unsigned int itwas, isnow;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+peasycap_standard = &easycap_standard[0];
+while (0xFFFF != peasycap_standard->mask) {
+	if (std_id & peasycap_standard->v4l2_standard.id)
+		break;
+	peasycap_standard++;
+}
+if (0xFFFF == peasycap_standard->mask) {
+	SAY("ERROR: 0x%08X=std_id: standard not found\n", \
+							(unsigned int)std_id);
+	return -EINVAL;
+}
+SAY("user requests standard: %s\n", \
+			&(peasycap_standard->v4l2_standard.name[0]));
+if (peasycap->standard_offset == \
+			(int)(peasycap_standard - &easycap_standard[0])) {
+	SAY("requested standard already in effect\n");
+	return 0;
+}
+peasycap->standard_offset = (int)(peasycap_standard - &easycap_standard[0]);
+peasycap->fps = peasycap_standard->v4l2_standard.frameperiod.denominator / \
+		peasycap_standard->v4l2_standard.frameperiod.numerator;
+if (!peasycap->fps) {
+	SAY("MISTAKE: frames-per-second is zero\n");
+	return -EFAULT;
+}
+JOT(8, "%i frames-per-second\n", peasycap->fps);
+peasycap->usec = 1000000 / (2 * peasycap->fps);
+peasycap->tolerate = 1000 * (25 / peasycap->fps);
+
+kill_video_urbs(peasycap);
+
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAA7113H DATASHEET PAGE 44, TABLE 42
+ */
+/*--------------------------------------------------------------------------*/
+need = 0;  itwas = 0;  reg = 0x00;  set = 0x00;
+switch (peasycap_standard->mask & 0x000F) {
+case NTSC_M_JP: {
+	reg = 0x0A;  set = 0x95;
+	ir = read_saa(peasycap->pusb_device, reg);
+	if (0 > ir)
+		SAY("ERROR: cannot read SAA register 0x%02X\n", reg);
+	else
+		itwas = (unsigned int)ir;
+
+
+	set2to78(peasycap->pusb_device);
+
+
+	rc = write_saa(peasycap->pusb_device, reg, set);
+	if (0 != rc)
+		SAY("ERROR: failed to set SAA register " \
+			"0x%02X to 0x%02X for JP standard\n", reg, set);
+	else {
+		isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+		if (0 > ir)
+			JOT(8, "SAA register 0x%02X changed " \
+				"to 0x%02X\n", reg, isnow);
+		else
+			JOT(8, "SAA register 0x%02X changed " \
+				"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+
+		set2to78(peasycap->pusb_device);
+
+	}
+
+	reg = 0x0B;  set = 0x48;
+	ir = read_saa(peasycap->pusb_device, reg);
+	if (0 > ir)
+		SAY("ERROR: cannot read SAA register 0x%02X\n", reg);
+	else
+		itwas = (unsigned int)ir;
+
+	set2to78(peasycap->pusb_device);
+
+	rc = write_saa(peasycap->pusb_device, reg, set);
+	if (0 != rc)
+		SAY("ERROR: failed to set SAA register 0x%02X to 0x%02X " \
+						"for JP standard\n", reg, set);
+	else {
+		isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+		if (0 > ir)
+			JOT(8, "SAA register 0x%02X changed " \
+				"to 0x%02X\n", reg, isnow);
+		else
+			JOT(8, "SAA register 0x%02X changed " \
+				"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+
+		set2to78(peasycap->pusb_device);
+
+	}
+/*--------------------------------------------------------------------------*/
+/*
+ *  NOTE:  NO break HERE:  RUN ON TO NEXT CASE
+ */
+/*--------------------------------------------------------------------------*/
+}
+case NTSC_M:
+case PAL_BGHIN: {
+	reg = 0x0E;  set = 0x01;  need = 1;  break;
+}
+case NTSC_N_443:
+case PAL_60: {
+	reg = 0x0E;  set = 0x11;  need = 1;  break;
+}
+case NTSC_443:
+case PAL_Nc: {
+	reg = 0x0E;  set = 0x21;  need = 1;  break;
+}
+case NTSC_N:
+case PAL_M: {
+	reg = 0x0E;  set = 0x31;  need = 1;  break;
+}
+case SECAM: {
+	reg = 0x0E;  set = 0x51;  need = 1;  break;
+}
+default:
+	break;
+}
+/*--------------------------------------------------------------------------*/
+if (need) {
+	ir = read_saa(peasycap->pusb_device, reg);
+	if (0 > ir)
+		SAY("ERROR: failed to read SAA register 0x%02X\n", reg);
+	else
+		itwas = (unsigned int)ir;
+
+	set2to78(peasycap->pusb_device);
+
+	rc = write_saa(peasycap->pusb_device, reg, set);
+	if (0 != write_saa(peasycap->pusb_device, reg, set)) {
+		SAY("ERROR: failed to set SAA register " \
+			"0x%02X to 0x%02X for table 42\n", reg, set);
+	} else {
+		isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+		if (0 > ir)
+			JOT(8, "SAA register 0x%02X changed " \
+				"to 0x%02X\n", reg, isnow);
+		else
+			JOT(8, "SAA register 0x%02X changed " \
+				"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+	}
+}
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAA7113H DATASHEET PAGE 41
+ */
+/*--------------------------------------------------------------------------*/
+reg = 0x08;
+ir = read_saa(peasycap->pusb_device, reg);
+if (0 > ir)
+	SAY("ERROR: failed to read SAA register 0x%02X " \
+						"so cannot reset\n", reg);
+else {
+	itwas = (unsigned int)ir;
+	if (peasycap_standard->mask & 0x0001)
+		set = itwas | 0x40 ;
+	else
+		set = itwas & ~0x40 ;
+
+set2to78(peasycap->pusb_device);
+
+rc  = write_saa(peasycap->pusb_device, reg, set);
+if (0 != rc)
+	SAY("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", reg, set);
+else {
+	isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+	if (0 > ir)
+		JOT(8, "SAA register 0x%02X changed to 0x%02X\n", reg, isnow);
+	else
+		JOT(8, "SAA register 0x%02X changed " \
+			"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+	}
+}
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAA7113H DATASHEET PAGE 51, TABLE 57
+ */
+/*---------------------------------------------------------------------------*/
+reg = 0x40;
+ir = read_saa(peasycap->pusb_device, reg);
+if (0 > ir)
+	SAY("ERROR: failed to read SAA register 0x%02X " \
+						"so cannot reset\n", reg);
+else {
+	itwas = (unsigned int)ir;
+	if (peasycap_standard->mask & 0x0001)
+		set = itwas | 0x80 ;
+	else
+		set = itwas & ~0x80 ;
+
+set2to78(peasycap->pusb_device);
+
+rc = write_saa(peasycap->pusb_device, reg, set);
+if (0 != rc)
+	SAY("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", reg, set);
+else {
+	isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+	if (0 > ir)
+		JOT(8, "SAA register 0x%02X changed to 0x%02X\n", reg, isnow);
+	else
+		JOT(8, "SAA register 0x%02X changed " \
+			"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+	}
+}
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAA7113H DATASHEET PAGE 53, TABLE 66
+ */
+/*--------------------------------------------------------------------------*/
+reg = 0x5A;
+ir = read_saa(peasycap->pusb_device, reg);
+if (0 > ir)
+	SAY("ERROR: failed to read SAA register 0x%02X but continuing\n", reg);
+	itwas = (unsigned int)ir;
+	if (peasycap_standard->mask & 0x0001)
+		set = 0x0A ;
+	else
+		set = 0x07 ;
+
+	set2to78(peasycap->pusb_device);
+
+	if (0 != write_saa(peasycap->pusb_device, reg, set))
+		SAY("ERROR: failed to set SAA register 0x%02X to 0x%02X\n", \
+								reg, set);
+	else {
+		isnow = (unsigned int)read_saa(peasycap->pusb_device, reg);
+		if (0 > ir)
+			JOT(8, "SAA register 0x%02X changed "
+				"to 0x%02X\n", reg, isnow);
+		else
+			JOT(8, "SAA register 0x%02X changed "
+				"from 0x%02X to 0x%02X\n", reg, itwas, isnow);
+	}
+	if (0 != check_saa(peasycap->pusb_device))
+		SAY("ERROR: check_saa() failed\n");
+return 0;
+}
+/*****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  THE ALGORITHM FOR RESPONDING TO THE VIDIO_S_FMT IOCTL DEPENDS ON THE
+ *  CURRENT VALUE OF peasycap->standard_offset.
+ *  PROVIDED THE ARGUMENT try IS false AND THERE IS NO PREMATURE ERROR RETURN
+ *  THIS ROUTINE UPDATES THE FOLLOWING:
+ *          peasycap->format_offset
+ *          peasycap->pixelformat
+ *          peasycap->field
+ *          peasycap->height
+ *          peasycap->width
+ *          peasycap->bytesperpixel
+ *          peasycap->byteswaporder
+ *          peasycap->decimatepixel
+ *          peasycap->frame_buffer_used
+ *          peasycap->videofieldamount
+ *          peasycap->offerfields
+ *
+ *  IF SUCCESSFUL THE FUNCTION RETURNS THE OFFSET IN easycap_format[]
+ *  IDENTIFYING THE FORMAT WHICH IS TO RETURNED TO THE USER.
+ *  ERRORS RETURN A NEGATIVE NUMBER.
+ */
+/*--------------------------------------------------------------------------*/
+int adjust_format(struct easycap *peasycap, \
+	__u32 width, __u32 height, __u32 pixelformat, int field, bool try)
+{
+struct easycap_format *peasycap_format, *peasycap_best_format;
+__u16 mask;
+struct usb_device *p;
+int miss, multiplier, best;
+char bf[5], *pc;
+__u32 uc;
+
+if ((struct easycap *)NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL\n");
+	return -EFAULT;
+}
+p = peasycap->pusb_device;
+if ((struct usb_device *)NULL == p) {
+	SAY("ERROR: peaycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+pc = &bf[0];
+uc = pixelformat;  memcpy((void *)pc, (void *)(&uc), 4);  bf[4] = 0;
+mask = easycap_standard[peasycap->standard_offset].mask;
+SAY("sought:    %ix%i,%s(0x%08X),%i=field,0x%02X=std mask\n", \
+				width, height, pc, pixelformat, field, mask);
+if (V4L2_FIELD_ANY == field) {
+	field = V4L2_FIELD_INTERLACED;
+	SAY("prefer:    V4L2_FIELD_INTERLACED=field, was V4L2_FIELD_ANY\n");
+}
+peasycap_best_format = (struct easycap_format *)NULL;
+peasycap_format = &easycap_format[0];
+while (0 != peasycap_format->v4l2_format.fmt.pix.width) {
+	JOT(16, ".> %i %i 0x%08X %ix%i\n", \
+		peasycap_format->mask & 0x01,
+		peasycap_format->v4l2_format.fmt.pix.field,
+		peasycap_format->v4l2_format.fmt.pix.pixelformat,
+		peasycap_format->v4l2_format.fmt.pix.width,
+		peasycap_format->v4l2_format.fmt.pix.height);
+
+	if (((peasycap_format->mask & 0x0F) == (mask & 0x0F)) && \
+		(peasycap_format->v4l2_format.fmt.pix.field == field) && \
+		(peasycap_format->v4l2_format.fmt.pix.pixelformat == \
+							pixelformat) && \
+		(peasycap_format->v4l2_format.fmt.pix.width  == width) && \
+		(peasycap_format->v4l2_format.fmt.pix.height == height)) {
+			peasycap_best_format = peasycap_format;
+			break;
+		}
+	peasycap_format++;
+}
+if (0 == peasycap_format->v4l2_format.fmt.pix.width) {
+	SAY("cannot do: %ix%i with standard mask 0x%02X\n", \
+							width, height, mask);
+	peasycap_format = &easycap_format[0];  best = -1;
+	while (0 != peasycap_format->v4l2_format.fmt.pix.width) {
+		if (((peasycap_format->mask & 0x0F) == (mask & 0x0F)) && \
+				 (peasycap_format->v4l2_format.fmt.pix\
+						.field == field) && \
+				 (peasycap_format->v4l2_format.fmt.pix\
+						.pixelformat == pixelformat)) {
+			miss = abs(peasycap_format->\
+					v4l2_format.fmt.pix.width  - width);
+			if ((best > miss) || (best < 0)) {
+				best = miss;
+				peasycap_best_format = peasycap_format;
+				if (!miss)
+					break;
+			}
+		}
+		peasycap_format++;
+	}
+	if (-1 == best) {
+		SAY("cannot do %ix... with standard mask 0x%02X\n", \
+								width, mask);
+		SAY("cannot do ...x%i with standard mask 0x%02X\n", \
+								height, mask);
+		SAY("           %ix%i unmatched\n", width, height);
+		return peasycap->format_offset;
+	}
+}
+if ((struct easycap_format *)NULL == peasycap_best_format) {
+	SAY("MISTAKE: peasycap_best_format is NULL");
+	return -EINVAL;
+}
+peasycap_format = peasycap_best_format;
+
+/*...........................................................................*/
+if (true == try)
+	return (int)(peasycap_best_format - &easycap_format[0]);
+/*...........................................................................*/
+
+if (false != try) {
+	SAY("MISTAKE: true==try where is should be false\n");
+	return -EINVAL;
+}
+SAY("actioning: %ix%i %s\n", \
+			peasycap_format->v4l2_format.fmt.pix.width, \
+			peasycap_format->v4l2_format.fmt.pix.height,
+			&peasycap_format->name[0]);
+peasycap->height        = peasycap_format->v4l2_format.fmt.pix.height;
+peasycap->width         = peasycap_format->v4l2_format.fmt.pix.width;
+peasycap->pixelformat   = peasycap_format->v4l2_format.fmt.pix.pixelformat;
+peasycap->field         = peasycap_format->v4l2_format.fmt.pix.field;
+peasycap->format_offset = (int)(peasycap_format - &easycap_format[0]);
+peasycap->bytesperpixel = (0x00F0 & peasycap_format->mask) >> 4 ;
+if (0x0100 & peasycap_format->mask)
+	peasycap->byteswaporder = true;
+else
+	peasycap->byteswaporder = false;
+if (0x0800 & peasycap_format->mask)
+	peasycap->decimatepixel = true;
+else
+	peasycap->decimatepixel = false;
+if (0x1000 & peasycap_format->mask)
+	peasycap->offerfields = true;
+else
+	peasycap->offerfields = false;
+if (true == peasycap->decimatepixel)
+	multiplier = 2;
+else
+	multiplier = 1;
+peasycap->videofieldamount = multiplier * peasycap->width * \
+					multiplier * peasycap->height;
+peasycap->frame_buffer_used = peasycap->bytesperpixel * \
+					peasycap->width * peasycap->height;
+
+if (true == peasycap->offerfields) {
+	SAY("WARNING: %i=peasycap->field is untested: " \
+				"please report problems\n", peasycap->field);
+
+
+/*
+ *    FIXME ---- THIS IS UNTESTED, MAY BE (AND PROBABLY IS) INCORRECT:
+ *
+ *    peasycap->frame_buffer_used = peasycap->frame_buffer_used / 2;
+ *
+ *    SO DO NOT RISK IT YET.
+ *
+ */
+
+
+
+}
+
+kill_video_urbs(peasycap);
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  PAL
+ */
+/*---------------------------------------------------------------------------*/
+if (0 == (0x01 & peasycap_format->mask)) {
+	if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && \
+			(576 == \
+			peasycap_format->v4l2_format.fmt.pix.height)) || \
+			((360 == \
+			peasycap_format->v4l2_format.fmt.pix.width) && \
+			(288 == \
+			peasycap_format->v4l2_format.fmt.pix.height))) {
+		if (0 != set_resolution(p, 0x0000, 0x0001, 0x05A0, 0x0121)) {
+			SAY("ERROR: set_resolution() failed\n");
+			return -EINVAL;
+		}
+	} else if ((704 == peasycap_format->v4l2_format.fmt.pix.width) && \
+			(576 == peasycap_format->v4l2_format.fmt.pix.height)) {
+		if (0 != set_resolution(p, 0x0004, 0x0001, 0x0584, 0x0121)) {
+			SAY("ERROR: set_resolution() failed\n");
+			return -EINVAL;
+		}
+	} else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && \
+			(480 == \
+			peasycap_format->v4l2_format.fmt.pix.height)) || \
+			((320 == \
+			peasycap_format->v4l2_format.fmt.pix.width) && \
+			(240 == \
+			peasycap_format->v4l2_format.fmt.pix.height))) {
+		if (0 != set_resolution(p, 0x0014, 0x0020, 0x0514, 0x0110)) {
+			SAY("ERROR: set_resolution() failed\n");
+			return -EINVAL;
+		}
+	} else {
+		SAY("MISTAKE: bad format, cannot set resolution\n");
+		return -EINVAL;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  NTSC
+ */
+/*---------------------------------------------------------------------------*/
+} else {
+	if (((720 == peasycap_format->v4l2_format.fmt.pix.width) && \
+			(480 == \
+			peasycap_format->v4l2_format.fmt.pix.height)) || \
+			((360 == \
+			peasycap_format->v4l2_format.fmt.pix.width) && \
+			(240 == \
+			peasycap_format->v4l2_format.fmt.pix.height))) {
+		if (0 != set_resolution(p, 0x0000, 0x0003, 0x05A0, 0x00F3)) {
+			SAY("ERROR: set_resolution() failed\n");
+			return -EINVAL;
+		}
+	} else if (((640 == peasycap_format->v4l2_format.fmt.pix.width) && \
+			(480 == \
+			peasycap_format->v4l2_format.fmt.pix.height)) || \
+			((320 == \
+			peasycap_format->v4l2_format.fmt.pix.width) && \
+			(240 == \
+			peasycap_format->v4l2_format.fmt.pix.height))) {
+		if (0 != set_resolution(p, 0x0014, 0x0003, 0x0514, 0x00F3)) {
+			SAY("ERROR: set_resolution() failed\n");
+			return -EINVAL;
+		}
+	} else {
+		SAY("MISTAKE: bad format, cannot set resolution\n");
+		return -EINVAL;
+	}
+}
+/*---------------------------------------------------------------------------*/
+
+check_stk(peasycap->pusb_device);
+
+return (int)(peasycap_best_format - &easycap_format[0]);
+}
+/*****************************************************************************/
+int adjust_brightness(struct easycap *peasycap, int value)
+{
+unsigned int mood;
+int i1;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_BRIGHTNESS == easycap_control[i1].id) {
+		if ((easycap_control[i1].minimum > value) || \
+					(easycap_control[i1].maximum < value))
+			value = easycap_control[i1].default_value;
+		peasycap->brightness = value;
+		mood = 0x00FF & (unsigned int)peasycap->brightness;
+
+		set2to78(peasycap->pusb_device);
+
+		if (!write_saa(peasycap->pusb_device, 0x0A, mood)) {
+			SAY("adjusting brightness to  0x%02X\n", mood);
+			return 0;
+		} else {
+			SAY("WARNING: failed to adjust brightness " \
+							"to 0x%02X\n", mood);
+			return -ENOENT;
+		}
+
+		set2to78(peasycap->pusb_device);
+
+		break;
+	}
+	i1++;
+}
+SAY("WARNING: failed to adjust brightness: control not found\n");
+return -ENOENT;
+}
+/*****************************************************************************/
+int adjust_contrast(struct easycap *peasycap, int value)
+{
+unsigned int mood;
+int i1;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_CONTRAST == easycap_control[i1].id) {
+		if ((easycap_control[i1].minimum > value) || \
+					(easycap_control[i1].maximum < value))
+			value = easycap_control[i1].default_value;
+		peasycap->contrast = value;
+		mood = 0x00FF & (unsigned int) (peasycap->contrast - 128);
+
+		set2to78(peasycap->pusb_device);
+
+		if (!write_saa(peasycap->pusb_device, 0x0B, mood)) {
+			SAY("adjusting contrast to  0x%02X\n", mood);
+			return 0;
+		} else {
+			SAY("WARNING: failed to adjust contrast to " \
+							"0x%02X\n", mood);
+			return -ENOENT;
+		}
+
+		set2to78(peasycap->pusb_device);
+
+		break;
+	}
+	i1++;
+}
+SAY("WARNING: failed to adjust contrast: control not found\n");
+return -ENOENT;
+}
+/*****************************************************************************/
+int adjust_saturation(struct easycap *peasycap, int value)
+{
+unsigned int mood;
+int i1;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_SATURATION == easycap_control[i1].id) {
+		if ((easycap_control[i1].minimum > value) || \
+					(easycap_control[i1].maximum < value))
+			value = easycap_control[i1].default_value;
+		peasycap->saturation = value;
+		mood = 0x00FF & (unsigned int) (peasycap->saturation - 128);
+
+		set2to78(peasycap->pusb_device);
+
+		if (!write_saa(peasycap->pusb_device, 0x0C, mood)) {
+			SAY("adjusting saturation to  0x%02X\n", mood);
+			return 0;
+		} else {
+			SAY("WARNING: failed to adjust saturation to " \
+							"0x%02X\n", mood);
+			return -ENOENT;
+		}
+		break;
+
+		set2to78(peasycap->pusb_device);
+
+	}
+	i1++;
+}
+SAY("WARNING: failed to adjust saturation: control not found\n");
+return -ENOENT;
+}
+/*****************************************************************************/
+int adjust_hue(struct easycap *peasycap, int value)
+{
+unsigned int mood;
+int i1, i2;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_HUE == easycap_control[i1].id) {
+		if ((easycap_control[i1].minimum > value) || \
+					(easycap_control[i1].maximum < value))
+			value = easycap_control[i1].default_value;
+		peasycap->hue = value;
+		i2 = peasycap->hue - 128;
+		mood = 0x00FF & ((int) i2);
+
+		set2to78(peasycap->pusb_device);
+
+		if (!write_saa(peasycap->pusb_device, 0x0D, mood)) {
+			SAY("adjusting hue to  0x%02X\n", mood);
+			return 0;
+		} else {
+			SAY("WARNING: failed to adjust hue to 0x%02X\n", mood);
+			return -ENOENT;
+		}
+
+		set2to78(peasycap->pusb_device);
+
+		break;
+	}
+	i1++;
+}
+SAY("WARNING: failed to adjust hue: control not found\n");
+return -ENOENT;
+}
+/*****************************************************************************/
+int adjust_volume(struct easycap *peasycap, int value)
+{
+__s8 mood;
+int i1;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_AUDIO_VOLUME == easycap_control[i1].id) {
+		if ((easycap_control[i1].minimum > value) || \
+			(easycap_control[i1].maximum < value))
+			value = easycap_control[i1].default_value;
+		peasycap->volume = value;
+		mood = (16 > peasycap->volume) ? 16 : \
+			((31 < peasycap->volume) ? 31 : \
+			(__s8) peasycap->volume);
+		if (!audio_gainset(peasycap->pusb_device, mood)) {
+			SAY("adjusting volume to 0x%01X\n", mood);
+			return 0;
+		} else {
+			SAY("WARNING: failed to adjust volume to " \
+							"0x%1X\n", mood);
+			return -ENOENT;
+		}
+		break;
+	}
+i1++;
+}
+SAY("WARNING: failed to adjust volume: control not found\n");
+return -ENOENT;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  AN ALTERNATIVE METHOD OF MUTING MIGHT SEEM TO BE:
+ *            usb_set_interface(peasycap->pusb_device, \
+ *                              peasycap->audio_interface, \
+ *                              peasycap->audio_altsetting_off);
+ *  HOWEVER, AFTER THIS COMMAND IS ISSUED ALL SUBSEQUENT URBS RECEIVE STATUS
+ *  -ESHUTDOWN.  THE HANDLER ROUTINE easysnd_complete() DECLINES TO RESUBMIT
+ *  THE URB AND THE PIPELINE COLLAPSES IRRETRIEVABLY.  BEWARE.
+ */
+/*---------------------------------------------------------------------------*/
+int adjust_mute(struct easycap *peasycap, int value)
+{
+int i1;
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+i1 = 0;
+while (0xFFFFFFFF != easycap_control[i1].id) {
+	if (V4L2_CID_AUDIO_MUTE == easycap_control[i1].id) {
+		peasycap->mute = value;
+		switch (peasycap->mute) {
+		case 1: {
+			peasycap->audio_idle = 1;
+			peasycap->timeval0.tv_sec = 0;
+			SAY("adjusting mute: %i=peasycap->audio_idle\n", \
+							peasycap->audio_idle);
+			return 0;
+		}
+		default: {
+			peasycap->audio_idle = 0;
+			SAY("adjusting mute: %i=peasycap->audio_idle\n", \
+							peasycap->audio_idle);
+			return 0;
+		}
+		}
+		break;
+	}
+	i1++;
+}
+SAY("WARNING: failed to adjust mute: control not found\n");
+return -ENOENT;
+}
+/****************************************************************************/
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+long
+easycap_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)\
+									{
+	return easycap_ioctl((struct inode *)NULL, file, cmd, arg);
+}
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+/*--------------------------------------------------------------------------*/
+int easycap_ioctl(struct inode *inode, struct file *file, \
+					unsigned int cmd, unsigned long arg)
+{
+static struct easycap *peasycap;
+static struct usb_device *p;
+static __u32 isequence;
+
+peasycap = file->private_data;
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL\n");
+	return -1;
+}
+p = peasycap->pusb_device;
+if ((struct usb_device *)NULL == p) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  MOST OF THE VARIABLES DECLARED static IN THE case{} BLOCKS BELOW ARE SO
+ *  DECLARED SIMPLY TO AVOID A COMPILER WARNING OF THE KIND:
+ *  easycap_ioctl.c: warning:
+ *                       the frame size of ... bytes is larger than 1024 bytes
+ */
+/*---------------------------------------------------------------------------*/
+switch (cmd) {
+case VIDIOC_QUERYCAP: {
+	static struct v4l2_capability v4l2_capability;
+	static char version[16], *p1, *p2;
+	static int i, rc, k[3];
+	static long lng;
+
+	JOT(8, "VIDIOC_QUERYCAP\n");
+
+	if (16 <= strlen(EASYCAP_DRIVER_VERSION)) {
+		SAY("ERROR: bad driver version string\n"); return -EINVAL;
+	}
+	strcpy(&version[0], EASYCAP_DRIVER_VERSION);
+	for (i = 0; i < 3; i++)
+		k[i] = 0;
+	p2 = &version[0];  i = 0;
+	while (*p2) {
+		p1 = p2;
+		while (*p2 && ('.' != *p2))
+			p2++;
+		if (*p2)
+			*p2++ = 0;
+		if (3 > i) {
+			rc = (int) strict_strtol(p1, 10, &lng);
+			if (0 != rc) {
+				SAY("ERROR: %i=strict_strtol(%s,.,,)\n", \
+								rc, p1);
+				return -EINVAL;
+			}
+			k[i] = (int)lng;
+		}
+		i++;
+	}
+
+	memset(&v4l2_capability, 0, sizeof(struct v4l2_capability));
+	strlcpy(&v4l2_capability.driver[0], "easycap", \
+					sizeof(v4l2_capability.driver));
+
+	v4l2_capability.capabilities = \
+				V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | \
+				V4L2_CAP_AUDIO         | V4L2_CAP_READWRITE;
+
+	v4l2_capability.version = KERNEL_VERSION(k[0], k[1], k[2]);
+	JOT(8, "v4l2_capability.version=(%i,%i,%i)\n", k[0], k[1], k[2]);
+
+	strlcpy(&v4l2_capability.card[0], "EasyCAP DC60", \
+		sizeof(v4l2_capability.card));
+
+	if (usb_make_path(peasycap->pusb_device, &v4l2_capability.bus_info[0],\
+				sizeof(v4l2_capability.bus_info)) < 0) {
+		strlcpy(&v4l2_capability.bus_info[0], "EasyCAP bus_info", \
+					sizeof(v4l2_capability.bus_info));
+		JOT(8, "%s=v4l2_capability.bus_info\n", \
+					&v4l2_capability.bus_info[0]);
+	}
+	if (0 != copy_to_user((void __user *)arg, &v4l2_capability, \
+					sizeof(struct v4l2_capability))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_ENUMINPUT: {
+	static struct v4l2_input v4l2_input;
+	static __u32 index;
+
+	JOT(8, "VIDIOC_ENUMINPUT\n");
+
+	if (0 != copy_from_user(&v4l2_input, (void __user *)arg, \
+					sizeof(struct v4l2_input))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	index = v4l2_input.index;
+	memset(&v4l2_input, 0, sizeof(struct v4l2_input));
+
+	switch (index) {
+	case 0: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "CVBS0");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	case 1: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "CVBS1");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	case 2: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "CVBS2");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	case 3: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "CVBS3");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	case 4: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "CVBS4");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	case 5: {
+		v4l2_input.index = index;
+		strcpy(&v4l2_input.name[0], "S-VIDEO");
+		v4l2_input.type = V4L2_INPUT_TYPE_CAMERA;
+		v4l2_input.audioset = 0x01;
+		v4l2_input.tuner = 0;
+		v4l2_input.std = V4L2_STD_PAL | V4L2_STD_SECAM | \
+				V4L2_STD_NTSC ;
+		v4l2_input.status = 0;
+		JOT(8, "%i=index: %s\n", index, &v4l2_input.name[0]);
+		break;
+	}
+	default: {
+		JOT(8, "%i=index: exhausts inputs\n", index);
+		return -EINVAL;
+	}
+	}
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_input, \
+						sizeof(struct v4l2_input))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_INPUT: {
+	static __u32 index;
+
+	JOT(8, "VIDIOC_G_INPUT\n");
+	index = (__u32)peasycap->input;
+	JOT(8, "user is told: %i\n", index);
+	if (0 != copy_to_user((void __user *)arg, &index, sizeof(__u32))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_INPUT:
+	{
+	static __u32 index;
+
+	JOT(8, "VIDIOC_S_INPUT\n");
+
+	if (0 != copy_from_user(&index, (void __user *)arg, sizeof(__u32))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	JOT(8, "user requests input %i\n", index);
+
+	if ((int)index == peasycap->input) {
+		SAY("requested input already in effect\n");
+		break;
+	}
+
+	if ((0 > index) || (5 < index)) {
+		JOT(8, "ERROR:  bad requested input: %i\n", index);
+		return -EINVAL;
+	}
+	peasycap->input = (int)index;
+
+	select_input(peasycap->pusb_device, peasycap->input, 9);
+
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_ENUMAUDIO: {
+	JOT(8, "VIDIOC_ENUMAUDIO\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_ENUMAUDOUT: {
+	static struct v4l2_audioout v4l2_audioout;
+
+	JOT(8, "VIDIOC_ENUMAUDOUT\n");
+
+	if (0 != copy_from_user(&v4l2_audioout, (void __user *)arg, \
+					sizeof(struct v4l2_audioout))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (0 != v4l2_audioout.index)
+		return -EINVAL;
+	memset(&v4l2_audioout, 0, sizeof(struct v4l2_audioout));
+	v4l2_audioout.index = 0;
+	strcpy(&v4l2_audioout.name[0], "Soundtrack");
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_audioout, \
+					sizeof(struct v4l2_audioout))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_QUERYCTRL: {
+	static int i1;
+	static struct v4l2_queryctrl v4l2_queryctrl;
+
+	JOT(8, "VIDIOC_QUERYCTRL\n");
+
+	if (0 != copy_from_user(&v4l2_queryctrl, (void __user *)arg, \
+					sizeof(struct v4l2_queryctrl))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	i1 = 0;
+	while (0xFFFFFFFF != easycap_control[i1].id) {
+		if (easycap_control[i1].id == v4l2_queryctrl.id) {
+			JOT(8, "VIDIOC_QUERYCTRL  %s=easycap_control[%i]" \
+				".name\n", &easycap_control[i1].name[0], i1);
+			memcpy(&v4l2_queryctrl, &easycap_control[i1], \
+						sizeof(struct v4l2_queryctrl));
+			break;
+		}
+		i1++;
+	}
+	if (0xFFFFFFFF == easycap_control[i1].id) {
+		JOT(8, "%i=index: exhausts controls\n", i1);
+		return -EINVAL;
+	}
+	if (0 != copy_to_user((void __user *)arg, &v4l2_queryctrl, \
+					sizeof(struct v4l2_queryctrl))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_QUERYMENU: {
+	JOT(8, "VIDIOC_QUERYMENU unsupported\n");
+	return -EINVAL;
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_CTRL: {
+	static struct v4l2_control v4l2_control;
+
+	JOT(8, "VIDIOC_G_CTRL\n");
+
+	if (0 != copy_from_user(&v4l2_control, (void __user *)arg, \
+					sizeof(struct v4l2_control))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	switch (v4l2_control.id) {
+	case V4L2_CID_BRIGHTNESS: {
+		v4l2_control.value = peasycap->brightness;
+		JOT(8, "user enquires brightness: %i\n", v4l2_control.value);
+		break;
+	}
+	case V4L2_CID_CONTRAST: {
+		v4l2_control.value = peasycap->contrast;
+		JOT(8, "user enquires contrast: %i\n", v4l2_control.value);
+		break;
+	}
+	case V4L2_CID_SATURATION: {
+		v4l2_control.value = peasycap->saturation;
+		JOT(8, "user enquires saturation: %i\n", v4l2_control.value);
+		break;
+	}
+	case V4L2_CID_HUE: {
+		v4l2_control.value = peasycap->hue;
+		JOT(8, "user enquires hue: %i\n", v4l2_control.value);
+		break;
+	}
+	case V4L2_CID_AUDIO_VOLUME: {
+		v4l2_control.value = peasycap->volume;
+		JOT(8, "user enquires volume: %i\n", v4l2_control.value);
+		break;
+	}
+	case V4L2_CID_AUDIO_MUTE: {
+		if (1 == peasycap->mute)
+			v4l2_control.value = true;
+		else
+			v4l2_control.value = false;
+		JOT(8, "user enquires mute: %i\n", v4l2_control.value);
+		break;
+	}
+	default: {
+		SAY("ERROR: unknown V4L2 control: 0x%08X=id\n", \
+							v4l2_control.id);
+		explain_cid(v4l2_control.id);
+		return -EINVAL;
+	}
+	}
+	if (0 != copy_to_user((void __user *)arg, &v4l2_control, \
+					sizeof(struct v4l2_control))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+#if defined(VIDIOC_S_CTRL_OLD)
+case VIDIOC_S_CTRL_OLD: {
+	JOT(8, "VIDIOC_S_CTRL_OLD required at least for xawtv\n");
+}
+#endif /*VIDIOC_S_CTRL_OLD*/
+case VIDIOC_S_CTRL:
+	{
+	static struct v4l2_control v4l2_control;
+
+	JOT(8, "VIDIOC_S_CTRL\n");
+
+	if (0 != copy_from_user(&v4l2_control, (void __user *)arg, \
+					sizeof(struct v4l2_control))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	switch (v4l2_control.id) {
+	case V4L2_CID_BRIGHTNESS: {
+		JOT(8, "user requests brightness %i\n", v4l2_control.value);
+		if (0 != adjust_brightness(peasycap, v4l2_control.value))
+			;
+		break;
+	}
+	case V4L2_CID_CONTRAST: {
+		JOT(8, "user requests contrast %i\n", v4l2_control.value);
+		if (0 != adjust_contrast(peasycap, v4l2_control.value))
+			;
+		break;
+	}
+	case V4L2_CID_SATURATION: {
+		JOT(8, "user requests saturation %i\n", v4l2_control.value);
+		if (0 != adjust_saturation(peasycap, v4l2_control.value))
+			;
+		break;
+	}
+	case V4L2_CID_HUE: {
+		JOT(8, "user requests hue %i\n", v4l2_control.value);
+		if (0 != adjust_hue(peasycap, v4l2_control.value))
+			;
+		break;
+	}
+	case V4L2_CID_AUDIO_VOLUME: {
+		JOT(8, "user requests volume %i\n", v4l2_control.value);
+		if (0 != adjust_volume(peasycap, v4l2_control.value))
+			;
+		break;
+	}
+	case V4L2_CID_AUDIO_MUTE: {
+		int mute;
+
+		JOT(8, "user requests mute %i\n", v4l2_control.value);
+		if (true == v4l2_control.value)
+			mute = 1;
+		else
+			mute = 0;
+
+		if (0 != adjust_mute(peasycap, mute))
+			SAY("WARNING: failed to adjust mute to %i\n", mute);
+		break;
+	}
+	default: {
+		SAY("ERROR: unknown V4L2 control: 0x%08X=id\n", \
+							v4l2_control.id);
+		explain_cid(v4l2_control.id);
+	return -EINVAL;
+			}
+		}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_EXT_CTRLS: {
+	JOT(8, "VIDIOC_S_EXT_CTRLS unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_ENUM_FMT: {
+	static __u32 index;
+	static struct v4l2_fmtdesc v4l2_fmtdesc;
+
+	JOT(8, "VIDIOC_ENUM_FMT\n");
+
+	if (0 != copy_from_user(&v4l2_fmtdesc, (void __user *)arg, \
+					sizeof(struct v4l2_fmtdesc))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	index = v4l2_fmtdesc.index;
+	memset(&v4l2_fmtdesc, 0, sizeof(struct v4l2_fmtdesc));
+
+	v4l2_fmtdesc.index = index;
+	v4l2_fmtdesc.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	switch (index) {
+	case 0: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "uyvy");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_UYVY;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	case 1: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "yuy2");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_YUYV;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	case 2: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "rgb24");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_RGB24;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	case 3: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "rgb32");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_RGB32;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	case 4: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "bgr24");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_BGR24;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	case 5: {
+		v4l2_fmtdesc.flags = 0;
+		strcpy(&v4l2_fmtdesc.description[0], "bgr32");
+		v4l2_fmtdesc.pixelformat = V4L2_PIX_FMT_BGR32;
+		JOT(8, "%i=index: %s\n", index, &v4l2_fmtdesc.description[0]);
+		break;
+	}
+	default: {
+		JOT(8, "%i=index: exhausts formats\n", index);
+		return -EINVAL;
+	}
+	}
+	if (0 != copy_to_user((void __user *)arg, &v4l2_fmtdesc, \
+					sizeof(struct v4l2_fmtdesc))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_ENUM_FRAMESIZES: {
+	JOT(8, "VIDIOC_ENUM_FRAMESIZES unsupported\n");
+	return -EINVAL;
+}
+case VIDIOC_ENUM_FRAMEINTERVALS: {
+	JOT(8, "VIDIOC_ENUM_FRAME_INTERVALS unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_FMT: {
+	static struct v4l2_format v4l2_format;
+	static struct v4l2_pix_format v4l2_pix_format;
+
+	JOT(8, "VIDIOC_G_FMT\n");
+
+	if (0 != copy_from_user(&v4l2_format, (void __user *)arg, \
+					sizeof(struct v4l2_format))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		POUT;
+		return -EINVAL;
+	}
+
+	memset(&v4l2_pix_format, 0, sizeof(struct v4l2_pix_format));
+	v4l2_format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memcpy(&(v4l2_format.fmt.pix), \
+			 &(easycap_format[peasycap->format_offset]\
+			.v4l2_format.fmt.pix), sizeof(v4l2_pix_format));
+	JOT(8, "user is told: %s\n", \
+			&easycap_format[peasycap->format_offset].name[0]);
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_format, \
+					sizeof(struct v4l2_format))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_TRY_FMT:
+case VIDIOC_S_FMT: {
+	static struct v4l2_format v4l2_format;
+	static struct v4l2_pix_format v4l2_pix_format;
+	static bool try;
+	static int best_format;
+
+	if (VIDIOC_TRY_FMT == cmd) {
+		JOT(8, "VIDIOC_TRY_FMT\n");
+		try = true;
+	} else {
+		JOT(8, "VIDIOC_S_FMT\n");
+		try = false;
+	}
+
+	if (0 != copy_from_user(&v4l2_format, (void __user *)arg, \
+					sizeof(struct v4l2_format))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	best_format = adjust_format(peasycap, \
+					v4l2_format.fmt.pix.width, \
+					v4l2_format.fmt.pix.height, \
+					v4l2_format.fmt.pix.pixelformat, \
+					v4l2_format.fmt.pix.field, \
+					try);
+	if (0 > best_format) {
+		JOT(8, "WARNING: adjust_format() returned %i\n", best_format);
+		return -ENOENT;
+	}
+/*...........................................................................*/
+	memset(&v4l2_pix_format, 0, sizeof(struct v4l2_pix_format));
+	v4l2_format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	memcpy(&(v4l2_format.fmt.pix), &(easycap_format[best_format]\
+			.v4l2_format.fmt.pix), sizeof(v4l2_pix_format));
+	JOT(8, "user is told: %s\n", &easycap_format[best_format].name[0]);
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_format, \
+					sizeof(struct v4l2_format))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_CROPCAP: {
+	static struct v4l2_cropcap v4l2_cropcap;
+
+	JOT(8, "VIDIOC_CROPCAP\n");
+
+	if (0 != copy_from_user(&v4l2_cropcap, (void __user *)arg, \
+					sizeof(struct v4l2_cropcap))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_cropcap.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		JOT(8, "v4l2_cropcap.type != V4L2_BUF_TYPE_VIDEO_CAPTURE\n");
+
+	memset(&v4l2_cropcap, 0, sizeof(struct v4l2_cropcap));
+	v4l2_cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	v4l2_cropcap.bounds.left      = 0;
+	v4l2_cropcap.bounds.top       = 0;
+	v4l2_cropcap.bounds.width     = peasycap->width;
+	v4l2_cropcap.bounds.height    = peasycap->height;
+	v4l2_cropcap.defrect.left     = 0;
+	v4l2_cropcap.defrect.top      = 0;
+	v4l2_cropcap.defrect.width    = peasycap->width;
+	v4l2_cropcap.defrect.height   = peasycap->height;
+	v4l2_cropcap.pixelaspect.numerator = 1;
+	v4l2_cropcap.pixelaspect.denominator = 1;
+
+	JOT(8, "user is told: %ix%i\n", peasycap->width, peasycap->height);
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_cropcap, \
+					sizeof(struct v4l2_cropcap))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_CROP:
+case VIDIOC_S_CROP: {
+	JOT(8, "VIDIOC_G_CROP|VIDIOC_S_CROP  unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_QUERYSTD: {
+	JOT(8, "VIDIOC_QUERYSTD: " \
+			"EasyCAP is incapable of detecting standard\n");
+	return -EINVAL;
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE MANIPULATIONS INVOLVING last0,last1,last2,last3 CONSTITUTE A WORKAROUND
+ *  FOR WHAT APPEARS TO BE A BUG IN 64-BIT mplayer.
+ *  NOT NEEDED, BUT HOPEFULLY HARMLESS, FOR 32-BIT mplayer.
+ */
+/*---------------------------------------------------------------------------*/
+case VIDIOC_ENUMSTD: {
+	static int last0 = -1, last1 = -1, last2 = -1, last3 = -1;
+	static struct v4l2_standard v4l2_standard;
+	static __u32 index;
+	static struct easycap_standard const *peasycap_standard;
+
+	JOT(8, "VIDIOC_ENUMSTD\n");
+
+	if (0 != copy_from_user(&v4l2_standard, (void __user *)arg, \
+					sizeof(struct v4l2_standard))) {
+		POUT;
+		return -EFAULT;
+	}
+	index = v4l2_standard.index;
+
+	last3 = last2; last2 = last1; last1 = last0; last0 = index;
+	if ((index == last3) && (index == last2) && \
+			(index == last1) && (index == last0)) {
+		index++;
+		last3 = last2; last2 = last1; last1 = last0; last0 = index;
+	}
+
+	memset(&v4l2_standard, 0, sizeof(struct v4l2_standard));
+
+	peasycap_standard = &easycap_standard[0];
+	while (0xFFFF != peasycap_standard->mask) {
+		if ((int)(peasycap_standard - &easycap_standard[0]) == index)
+			break;
+		peasycap_standard++;
+	}
+	if (0xFFFF == peasycap_standard->mask) {
+		JOT(8, "%i=index: exhausts standards\n", index);
+		return -EINVAL;
+	}
+	JOT(8, "%i=index: %s\n", index, \
+				&(peasycap_standard->v4l2_standard.name[0]));
+	memcpy(&v4l2_standard, &(peasycap_standard->v4l2_standard), \
+					sizeof(struct v4l2_standard));
+
+	v4l2_standard.index = index;
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_standard, \
+					sizeof(struct v4l2_standard))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_STD: {
+	static v4l2_std_id std_id;
+	static struct easycap_standard const *peasycap_standard;
+
+	JOT(8, "VIDIOC_G_STD\n");
+
+	if (0 != copy_from_user(&std_id, (void __user *)arg, \
+						sizeof(v4l2_std_id))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	peasycap_standard = &easycap_standard[peasycap->standard_offset];
+	std_id = peasycap_standard->v4l2_standard.id;
+
+	JOT(8, "user is told: %s\n", \
+				&peasycap_standard->v4l2_standard.name[0]);
+
+	if (0 != copy_to_user((void __user *)arg, &std_id, \
+						sizeof(v4l2_std_id))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_STD: {
+	static v4l2_std_id std_id;
+	static int rc;
+
+	JOT(8, "VIDIOC_S_STD\n");
+
+	if (0 != copy_from_user(&std_id, (void __user *)arg, \
+						sizeof(v4l2_std_id))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	rc = adjust_standard(peasycap, std_id);
+	if (0 > rc) {
+		JOT(8, "WARNING: adjust_standard() returned %i\n", rc);
+		return -ENOENT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_REQBUFS: {
+	static int nbuffers;
+	static struct v4l2_requestbuffers v4l2_requestbuffers;
+
+	JOT(8, "VIDIOC_REQBUFS\n");
+
+	if (0 != copy_from_user(&v4l2_requestbuffers, (void __user *)arg, \
+				sizeof(struct v4l2_requestbuffers))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_requestbuffers.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (v4l2_requestbuffers.memory != V4L2_MEMORY_MMAP) {
+		POUT;
+		return -EINVAL;
+	}
+	nbuffers = v4l2_requestbuffers.count;
+	JOT(8, "                   User requests %i buffers ...\n", nbuffers);
+	if (nbuffers < 2)
+		nbuffers = 2;
+	if (nbuffers > FRAME_BUFFER_MANY)
+		nbuffers = FRAME_BUFFER_MANY;
+	if (v4l2_requestbuffers.count == nbuffers) {
+		JOT(8, "                   ... agree to  %i buffers\n", \
+								nbuffers);
+	} else {
+		JOT(8, "                  ... insist on  %i buffers\n", \
+								nbuffers);
+		v4l2_requestbuffers.count = nbuffers;
+	}
+	peasycap->frame_buffer_many = nbuffers;
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_requestbuffers, \
+				sizeof(struct v4l2_requestbuffers))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_QUERYBUF: {
+	static __u32 index;
+	static struct v4l2_buffer v4l2_buffer;
+
+	JOT(8, "VIDIOC_QUERYBUF\n");
+
+	if (peasycap->video_eof) {
+		JOT(8, "returning -1 because  %i=video_eof\n", \
+							peasycap->video_eof);
+		return -1;
+	}
+
+	if (0 != copy_from_user(&v4l2_buffer, (void __user *)arg, \
+					sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	index = v4l2_buffer.index;
+	if (index < 0 || index >= peasycap->frame_buffer_many)
+		return -EINVAL;
+	memset(&v4l2_buffer, 0, sizeof(struct v4l2_buffer));
+	v4l2_buffer.index = index;
+	v4l2_buffer.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	v4l2_buffer.bytesused = peasycap->frame_buffer_used;
+	v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | \
+						peasycap->done[index] | \
+						peasycap->queued[index];
+	v4l2_buffer.field = peasycap->field;
+	v4l2_buffer.memory = V4L2_MEMORY_MMAP;
+	v4l2_buffer.m.offset = index * FRAME_BUFFER_SIZE;
+	v4l2_buffer.length = FRAME_BUFFER_SIZE;
+
+	JOT(16, "  %10i=index\n", v4l2_buffer.index);
+	JOT(16, "  0x%08X=type\n", v4l2_buffer.type);
+	JOT(16, "  %10i=bytesused\n", v4l2_buffer.bytesused);
+	JOT(16, "  0x%08X=flags\n", v4l2_buffer.flags);
+	JOT(16, "  %10i=field\n", v4l2_buffer.field);
+	JOT(16, "  %10li=timestamp.tv_usec\n", \
+					 (long)v4l2_buffer.timestamp.tv_usec);
+	JOT(16, "  %10i=sequence\n", v4l2_buffer.sequence);
+	JOT(16, "  0x%08X=memory\n", v4l2_buffer.memory);
+	JOT(16, "  %10i=m.offset\n", v4l2_buffer.m.offset);
+	JOT(16, "  %10i=length\n", v4l2_buffer.length);
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_buffer, \
+					sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_QBUF: {
+	static struct v4l2_buffer v4l2_buffer;
+
+	JOT(8, "VIDIOC_QBUF\n");
+
+	if (0 != copy_from_user(&v4l2_buffer, (void __user *)arg, \
+					sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (v4l2_buffer.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+	if (v4l2_buffer.index < 0 || \
+		 (v4l2_buffer.index >= peasycap->frame_buffer_many))
+		return -EINVAL;
+	v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED;
+
+	peasycap->done[v4l2_buffer.index]   = 0;
+	peasycap->queued[v4l2_buffer.index] = V4L2_BUF_FLAG_QUEUED;
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_buffer, \
+					sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	JOT(8, ".....   user queueing frame buffer %i\n", \
+						(int)v4l2_buffer.index);
+
+	peasycap->frame_lock = 0;
+
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_DQBUF:
+	{
+#if defined(AUDIOTIME)
+	static struct signed_div_result sdr;
+	static long long int above, below, dnbydt, fudge, sll;
+	static unsigned long long int ull;
+	static struct timeval timeval0;
+	struct timeval timeval1;
+#endif /*AUDIOTIME*/
+	static struct timeval timeval, timeval2;
+	static int i, j;
+	static struct v4l2_buffer v4l2_buffer;
+
+	JOT(8, "VIDIOC_DQBUF\n");
+
+	if ((peasycap->video_idle) || (peasycap->video_eof)) {
+		JOT(8, "returning -EIO because  " \
+				"%i=video_idle  %i=video_eof\n", \
+				peasycap->video_idle, peasycap->video_eof);
+		return -EIO;
+	}
+
+	if (0 != copy_from_user(&v4l2_buffer, (void __user *)arg, \
+					sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_buffer.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (!peasycap->video_isoc_streaming) {
+		JOT(16, "returning -EIO because video urbs not streaming\n");
+		return -EIO;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  IF THE USER HAS PREVIOUSLY CALLED easycap_poll(), AS DETERMINED BY FINDING
+ *  THE FLAG peasycap->polled SET, THERE MUST BE NO FURTHER WAIT HERE.  IN THIS
+ *  CASE, JUST CHOOSE THE FRAME INDICATED BY peasycap->frame_read
+ */
+/*---------------------------------------------------------------------------*/
+
+	if (!peasycap->polled) {
+		if (-EIO == easycap_dqbuf(peasycap, 0))
+			return -EIO;
+	} else {
+		if (peasycap->video_eof)
+			return -EIO;
+	}
+	if (V4L2_BUF_FLAG_DONE != peasycap->done[peasycap->frame_read]) {
+		SAY("ERROR: V4L2_BUF_FLAG_DONE != 0x%08X\n", \
+					peasycap->done[peasycap->frame_read]);
+	}
+	peasycap->polled = 0;
+
+	if (!(isequence % 10)) {
+		for (i = 0; i < 179; i++)
+			peasycap->merit[i] = peasycap->merit[i+1];
+		peasycap->merit[179] = merit_saa(peasycap->pusb_device);
+		j = 0;
+		for (i = 0; i < 180; i++)
+			j += peasycap->merit[i];
+		if (90 < j) {
+			SAY("easycap driver shutting down " \
+							"on condition blue\n");
+			peasycap->video_eof = 1; peasycap->audio_eof = 1;
+		}
+	}
+
+	v4l2_buffer.index = peasycap->frame_read;
+	v4l2_buffer.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	v4l2_buffer.bytesused = peasycap->frame_buffer_used;
+	v4l2_buffer.flags = V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_DONE;
+	v4l2_buffer.field =  peasycap->field;
+	if (V4L2_FIELD_ALTERNATE == v4l2_buffer.field)
+		v4l2_buffer.field = \
+				0x000F & (peasycap->\
+				frame_buffer[peasycap->frame_read][0].kount);
+	do_gettimeofday(&timeval);
+	timeval2 = timeval;
+
+#if defined(AUDIOTIME)
+	if (!peasycap->timeval0.tv_sec) {
+		timeval0 = timeval;
+		timeval1 = timeval;
+		timeval2 = timeval;
+		dnbydt = 192000;
+
+		if (mutex_lock_interruptible(&(peasycap->mutex_timeval0)))
+			return -ERESTARTSYS;
+		peasycap->timeval0 = timeval0;
+		mutex_unlock(&(peasycap->mutex_timeval0));
+	} else {
+		if (mutex_lock_interruptible(&(peasycap->mutex_timeval1)))
+			return -ERESTARTSYS;
+		dnbydt = peasycap->dnbydt;
+		timeval1 = peasycap->timeval1;
+		mutex_unlock(&(peasycap->mutex_timeval1));
+		above = dnbydt * MICROSECONDS(timeval, timeval1);
+		below = 192000;
+		sdr = signed_div(above, below);
+
+		above = sdr.quotient + timeval1.tv_usec - 350000;
+
+		below = 1000000;
+		sdr = signed_div(above, below);
+		timeval2.tv_usec = sdr.remainder;
+		timeval2.tv_sec = timeval1.tv_sec + sdr.quotient;
+	}
+	if (!(isequence % 500)) {
+		fudge = ((long long int)(1000000)) * \
+				((long long int)(timeval.tv_sec - \
+						timeval2.tv_sec)) + \
+				(long long int)(timeval.tv_usec - \
+				timeval2.tv_usec);
+		sdr = signed_div(fudge, 1000);
+		sll = sdr.quotient;
+		ull = sdr.remainder;
+
+		SAY("%5lli.%-3lli=ms timestamp fudge\n", sll, ull);
+	}
+#endif /*AUDIOTIME*/
+
+	v4l2_buffer.timestamp = timeval2;
+	v4l2_buffer.sequence = isequence++;
+	v4l2_buffer.memory = V4L2_MEMORY_MMAP;
+	v4l2_buffer.m.offset = v4l2_buffer.index * FRAME_BUFFER_SIZE;
+	v4l2_buffer.length = FRAME_BUFFER_SIZE;
+
+	JOT(16, "  %10i=index\n", v4l2_buffer.index);
+	JOT(16, "  0x%08X=type\n", v4l2_buffer.type);
+	JOT(16, "  %10i=bytesused\n", v4l2_buffer.bytesused);
+	JOT(16, "  0x%08X=flags\n", v4l2_buffer.flags);
+	JOT(16, "  %10i=field\n", v4l2_buffer.field);
+	JOT(16, "  %10li=timestamp.tv_usec\n", \
+					(long)v4l2_buffer.timestamp.tv_usec);
+	JOT(16, "  %10i=sequence\n", v4l2_buffer.sequence);
+	JOT(16, "  0x%08X=memory\n", v4l2_buffer.memory);
+	JOT(16, "  %10i=m.offset\n", v4l2_buffer.m.offset);
+	JOT(16, "  %10i=length\n", v4l2_buffer.length);
+
+	if (0 != copy_to_user((void __user *)arg, &v4l2_buffer, \
+						sizeof(struct v4l2_buffer))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	JOT(8, "..... user is offered frame buffer %i\n", \
+							peasycap->frame_read);
+	peasycap->frame_lock = 1;
+	if (peasycap->frame_read == peasycap->frame_fill) {
+		if (peasycap->frame_lock) {
+			JOT(8, "ERROR:  filling frame buffer " \
+						"while offered to user\n");
+		}
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+/*---------------------------------------------------------------------------*/
+/*
+ *  AUDIO URBS HAVE ALREADY BEEN SUBMITTED WHEN THIS COMMAND IS RECEIVED;
+ *  VIDEO URBS HAVE NOT.
+ */
+/*---------------------------------------------------------------------------*/
+case VIDIOC_STREAMON: {
+	static int i;
+
+	JOT(8, "VIDIOC_STREAMON\n");
+
+	isequence = 0;
+	for (i = 0; i < 180; i++)
+		peasycap->merit[i] = 0;
+	if ((struct usb_device *)NULL == peasycap->pusb_device) {
+		SAY("ERROR: peasycap->pusb_device is NULL\n");
+		return -EFAULT;
+	}
+	submit_video_urbs(peasycap);
+	peasycap->video_idle = 0;
+	peasycap->audio_idle = 0;
+	peasycap->video_eof = 0;
+	peasycap->audio_eof = 0;
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_STREAMOFF: {
+	JOT(8, "VIDIOC_STREAMOFF\n");
+
+	if ((struct usb_device *)NULL == peasycap->pusb_device) {
+		SAY("ERROR: peasycap->pusb_device is NULL\n");
+		return -EFAULT;
+	}
+
+	peasycap->video_idle = 1;
+	peasycap->audio_idle = 1;  peasycap->timeval0.tv_sec = 0;
+/*---------------------------------------------------------------------------*/
+/*
+ *  IF THE WAIT QUEUES ARE NOT CLEARED IN RESPONSE TO THE STREAMOFF COMMAND
+ *  THE USERSPACE PROGRAM, E.G. mplayer, MAY HANG ON EXIT.   BEWARE.
+ */
+/*---------------------------------------------------------------------------*/
+	JOT(8, "calling wake_up on wq_video and wq_audio\n");
+	wake_up_interruptible(&(peasycap->wq_video));
+	wake_up_interruptible(&(peasycap->wq_audio));
+/*---------------------------------------------------------------------------*/
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_PARM: {
+	static struct v4l2_streamparm v4l2_streamparm;
+
+	JOT(8, "VIDIOC_G_PARM\n");
+
+	if (0 != copy_from_user(&v4l2_streamparm, (void __user *)arg, \
+					sizeof(struct v4l2_streamparm))) {
+		POUT;
+		return -EFAULT;
+	}
+
+	if (v4l2_streamparm.type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		POUT;
+		return -EINVAL;
+	}
+	v4l2_streamparm.parm.capture.capability = 0;
+	v4l2_streamparm.parm.capture.capturemode = 0;
+	v4l2_streamparm.parm.capture.timeperframe.numerator = 1;
+	v4l2_streamparm.parm.capture.timeperframe.denominator = 30;
+	v4l2_streamparm.parm.capture.readbuffers = peasycap->frame_buffer_many;
+	v4l2_streamparm.parm.capture.extendedmode = 0;
+	if (0 != copy_to_user((void __user *)arg, &v4l2_streamparm, \
+					sizeof(struct v4l2_streamparm))) {
+		POUT;
+		return -EFAULT;
+	}
+	break;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_PARM: {
+	JOT(8, "VIDIOC_S_PARM unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_AUDIO: {
+	JOT(8, "VIDIOC_G_AUDIO unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_AUDIO: {
+	JOT(8, "VIDIOC_S_AUDIO unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_S_TUNER: {
+	JOT(8, "VIDIOC_S_TUNER unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_FBUF:
+case VIDIOC_S_FBUF:
+case VIDIOC_OVERLAY: {
+	JOT(8, "VIDIOC_G_FBUF|VIDIOC_S_FBUF|VIDIOC_OVERLAY unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+case VIDIOC_G_TUNER: {
+	JOT(8, "VIDIOC_G_TUNER unsupported\n");
+	return -EINVAL;
+}
+case VIDIOC_G_FREQUENCY:
+case VIDIOC_S_FREQUENCY: {
+	JOT(8, "VIDIOC_G_FREQUENCY|VIDIOC_S_FREQUENCY unsupported\n");
+	return -EINVAL;
+}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+default: {
+	JOT(8, "ERROR: unrecognized V4L2 IOCTL command: 0x%08X\n", cmd);
+	explain_ioctl(cmd);
+	POUT;
+	return -ENOIOCTLCMD;
+}
+}
+return 0;
+}
+/****************************************************************************/
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+long
+easysnd_ioctl_noinode(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	return easysnd_ioctl((struct inode *)NULL, file, cmd, arg);
+}
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+/*--------------------------------------------------------------------------*/
+int easysnd_ioctl(struct inode *inode, struct file *file, \
+					unsigned int cmd, unsigned long arg)
+{
+struct easycap *peasycap;
+struct usb_device *p;
+
+peasycap = file->private_data;
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL.\n");
+	return -1;
+}
+p = peasycap->pusb_device;
+/*---------------------------------------------------------------------------*/
+switch (cmd) {
+case SNDCTL_DSP_GETCAPS: {
+	int caps;
+	JOT(8, "SNDCTL_DSP_GETCAPS\n");
+
+#if defined(UPSAMPLE)
+	if (true == peasycap->microphone)
+		caps = 0x04400000;
+	else
+		caps = 0x04400000;
+#else
+	if (true == peasycap->microphone)
+		caps = 0x02400000;
+	else
+		caps = 0x04400000;
+#endif /*UPSAMPLE*/
+
+	if (0 != copy_to_user((void __user *)arg, &caps, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_GETFMTS: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_GETFMTS\n");
+
+#if defined(UPSAMPLE)
+	if (true == peasycap->microphone)
+		incoming = AFMT_S16_LE;
+	else
+		incoming = AFMT_S16_LE;
+#else
+	if (true == peasycap->microphone)
+		incoming = AFMT_S16_LE;
+	else
+		incoming = AFMT_S16_LE;
+#endif /*UPSAMPLE*/
+
+	if (0 != copy_to_user((void __user *)arg, &incoming, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_SETFMT: {
+	int incoming, outgoing;
+	JOT(8, "SNDCTL_DSP_SETFMT\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+
+#if defined(UPSAMPLE)
+	if (true == peasycap->microphone)
+		outgoing = AFMT_S16_LE;
+	else
+		outgoing = AFMT_S16_LE;
+#else
+	if (true == peasycap->microphone)
+		outgoing = AFMT_S16_LE;
+	else
+		outgoing = AFMT_S16_LE;
+#endif /*UPSAMPLE*/
+
+	if (incoming != outgoing) {
+		JOT(8, "........... %i=outgoing\n", outgoing);
+		JOT(8, "        cf. %i=AFMT_S16_LE\n", AFMT_S16_LE);
+		JOT(8, "        cf. %i=AFMT_U8\n", AFMT_U8);
+		if (0 != copy_to_user((void __user *)arg, &outgoing, \
+								sizeof(int)))
+			return -EFAULT;
+		return -EINVAL ;
+	}
+	break;
+}
+case SNDCTL_DSP_STEREO: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_STEREO\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+
+#if defined(UPSAMPLE)
+	if (true == peasycap->microphone)
+		incoming = 1;
+	else
+		incoming = 1;
+#else
+	if (true == peasycap->microphone)
+		incoming = 0;
+	else
+		incoming = 1;
+#endif /*UPSAMPLE*/
+
+	if (0 != copy_to_user((void __user *)arg, &incoming, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_SPEED: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_SPEED\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+
+#if defined(UPSAMPLE)
+	if (true == peasycap->microphone)
+		incoming = 32000;
+	else
+		incoming = 48000;
+#else
+	if (true == peasycap->microphone)
+		incoming = 8000;
+	else
+		incoming = 48000;
+#endif /*UPSAMPLE*/
+
+	if (0 != copy_to_user((void __user *)arg, &incoming, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_GETTRIGGER: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_GETTRIGGER\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+
+	incoming = PCM_ENABLE_INPUT;
+	if (0 != copy_to_user((void __user *)arg, &incoming, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_SETTRIGGER: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_SETTRIGGER\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+	JOT(8, "........... cf 0x%x=PCM_ENABLE_INPUT " \
+				"0x%x=PCM_ENABLE_OUTPUT\n", \
+					PCM_ENABLE_INPUT, PCM_ENABLE_OUTPUT);
+	;
+	;
+	;
+	;
+	break;
+}
+case SNDCTL_DSP_GETBLKSIZE: {
+	int incoming;
+	JOT(8, "SNDCTL_DSP_GETBLKSIZE\n");
+	if (0 != copy_from_user(&incoming, (void __user *)arg, sizeof(int)))
+		return -EFAULT;
+	JOT(8, "........... %i=incoming\n", incoming);
+	incoming = peasycap->audio_bytes_per_fragment;
+	if (0 != copy_to_user((void __user *)arg, &incoming, sizeof(int)))
+		return -EFAULT;
+	break;
+}
+case SNDCTL_DSP_GETISPACE: {
+	struct audio_buf_info audio_buf_info;
+
+	JOT(8, "SNDCTL_DSP_GETISPACE\n");
+
+	audio_buf_info.bytes      = peasycap->audio_bytes_per_fragment;
+	audio_buf_info.fragments  = 1;
+	audio_buf_info.fragsize   = 0;
+	audio_buf_info.fragstotal = 0;
+
+	if (0 != copy_to_user((void __user *)arg, &audio_buf_info, \
+								sizeof(int)))
+		return -EFAULT;
+	break;
+}
+default: {
+	JOT(8, "ERROR: unrecognized DSP IOCTL command: 0x%08X\n", cmd);
+	POUT;
+	return -ENOIOCTLCMD;
+}
+}
+return 0;
+}
+/*****************************************************************************/
+int explain_ioctl(__u32 wot)
+{
+int k;
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE DATA FOR THE ARRAY mess BELOW WERE CONSTRUCTED BY RUNNING THE FOLLOWING
+ *  SHELL SCRIPT:
+ *  #
+ *  cat /usr/src/linux-headers-`uname -r`/include/linux/videodev2.h | \
+ *     grep "^#define VIDIOC_" - | grep -v "_OLD" - | \
+ *     sed -e "s,_IO.*$,,;p" | sed -e "N;s,\n,, " | \
+ *     sed -e "s/^#define /  {/;s/#define /, \"/;s/$/\"},/" | \
+ *     sed -e "s,	,,g;s, ,,g" >ioctl.tmp
+ *  echo "{0xFFFFFFFF,\"\"}" >>ioctl.tmp
+ *  exit 0
+ *  #
+ * AND REINSTATING THE EXCISED "_OLD" CASES WERE LATER MANUALLY.
+ *
+ * THE DATA FOR THE ARRAY mess1 BELOW WERE CONSTRUCTED BY RUNNING THE FOLLOWING
+ * SHELL SCRIPT:
+ *  cat /usr/src/linux-headers-`uname -r`/include/linux/videodev.h | \
+ *     grep "^#define VIDIOC" - | grep -v "_OLD" - | \
+ *     sed -e "s,_IO.*$,,;p" | sed -e "N;s,\n,, " | \
+ *     sed -e "s/^#define /  {/;s/#define /, \"/;s/$/\"},/" | \
+ *     sed -e "s,   ,,g;s, ,,g" >ioctl.tmp
+ *  echo "{0xFFFFFFFF,\"\"}" >>ioctl.tmp
+ *  exit 0
+ *  #
+ */
+/*---------------------------------------------------------------------------*/
+static struct mess {
+	__u32 command;
+	char  name[64];
+} mess[] = {
+#if defined(VIDIOC_QUERYCAP)
+{VIDIOC_QUERYCAP, "VIDIOC_QUERYCAP"},
+#endif
+#if defined(VIDIOC_RESERVED)
+{VIDIOC_RESERVED, "VIDIOC_RESERVED"},
+#endif
+#if defined(VIDIOC_ENUM_FMT)
+{VIDIOC_ENUM_FMT, "VIDIOC_ENUM_FMT"},
+#endif
+#if defined(VIDIOC_G_FMT)
+{VIDIOC_G_FMT, "VIDIOC_G_FMT"},
+#endif
+#if defined(VIDIOC_S_FMT)
+{VIDIOC_S_FMT, "VIDIOC_S_FMT"},
+#endif
+#if defined(VIDIOC_REQBUFS)
+{VIDIOC_REQBUFS, "VIDIOC_REQBUFS"},
+#endif
+#if defined(VIDIOC_QUERYBUF)
+{VIDIOC_QUERYBUF, "VIDIOC_QUERYBUF"},
+#endif
+#if defined(VIDIOC_G_FBUF)
+{VIDIOC_G_FBUF, "VIDIOC_G_FBUF"},
+#endif
+#if defined(VIDIOC_S_FBUF)
+{VIDIOC_S_FBUF, "VIDIOC_S_FBUF"},
+#endif
+#if defined(VIDIOC_OVERLAY)
+{VIDIOC_OVERLAY, "VIDIOC_OVERLAY"},
+#endif
+#if defined(VIDIOC_QBUF)
+{VIDIOC_QBUF, "VIDIOC_QBUF"},
+#endif
+#if defined(VIDIOC_DQBUF)
+{VIDIOC_DQBUF, "VIDIOC_DQBUF"},
+#endif
+#if defined(VIDIOC_STREAMON)
+{VIDIOC_STREAMON, "VIDIOC_STREAMON"},
+#endif
+#if defined(VIDIOC_STREAMOFF)
+{VIDIOC_STREAMOFF, "VIDIOC_STREAMOFF"},
+#endif
+#if defined(VIDIOC_G_PARM)
+{VIDIOC_G_PARM, "VIDIOC_G_PARM"},
+#endif
+#if defined(VIDIOC_S_PARM)
+{VIDIOC_S_PARM, "VIDIOC_S_PARM"},
+#endif
+#if defined(VIDIOC_G_STD)
+{VIDIOC_G_STD, "VIDIOC_G_STD"},
+#endif
+#if defined(VIDIOC_S_STD)
+{VIDIOC_S_STD, "VIDIOC_S_STD"},
+#endif
+#if defined(VIDIOC_ENUMSTD)
+{VIDIOC_ENUMSTD, "VIDIOC_ENUMSTD"},
+#endif
+#if defined(VIDIOC_ENUMINPUT)
+{VIDIOC_ENUMINPUT, "VIDIOC_ENUMINPUT"},
+#endif
+#if defined(VIDIOC_G_CTRL)
+{VIDIOC_G_CTRL, "VIDIOC_G_CTRL"},
+#endif
+#if defined(VIDIOC_S_CTRL)
+{VIDIOC_S_CTRL, "VIDIOC_S_CTRL"},
+#endif
+#if defined(VIDIOC_G_TUNER)
+{VIDIOC_G_TUNER, "VIDIOC_G_TUNER"},
+#endif
+#if defined(VIDIOC_S_TUNER)
+{VIDIOC_S_TUNER, "VIDIOC_S_TUNER"},
+#endif
+#if defined(VIDIOC_G_AUDIO)
+{VIDIOC_G_AUDIO, "VIDIOC_G_AUDIO"},
+#endif
+#if defined(VIDIOC_S_AUDIO)
+{VIDIOC_S_AUDIO, "VIDIOC_S_AUDIO"},
+#endif
+#if defined(VIDIOC_QUERYCTRL)
+{VIDIOC_QUERYCTRL, "VIDIOC_QUERYCTRL"},
+#endif
+#if defined(VIDIOC_QUERYMENU)
+{VIDIOC_QUERYMENU, "VIDIOC_QUERYMENU"},
+#endif
+#if defined(VIDIOC_G_INPUT)
+{VIDIOC_G_INPUT, "VIDIOC_G_INPUT"},
+#endif
+#if defined(VIDIOC_S_INPUT)
+{VIDIOC_S_INPUT, "VIDIOC_S_INPUT"},
+#endif
+#if defined(VIDIOC_G_OUTPUT)
+{VIDIOC_G_OUTPUT, "VIDIOC_G_OUTPUT"},
+#endif
+#if defined(VIDIOC_S_OUTPUT)
+{VIDIOC_S_OUTPUT, "VIDIOC_S_OUTPUT"},
+#endif
+#if defined(VIDIOC_ENUMOUTPUT)
+{VIDIOC_ENUMOUTPUT, "VIDIOC_ENUMOUTPUT"},
+#endif
+#if defined(VIDIOC_G_AUDOUT)
+{VIDIOC_G_AUDOUT, "VIDIOC_G_AUDOUT"},
+#endif
+#if defined(VIDIOC_S_AUDOUT)
+{VIDIOC_S_AUDOUT, "VIDIOC_S_AUDOUT"},
+#endif
+#if defined(VIDIOC_G_MODULATOR)
+{VIDIOC_G_MODULATOR, "VIDIOC_G_MODULATOR"},
+#endif
+#if defined(VIDIOC_S_MODULATOR)
+{VIDIOC_S_MODULATOR, "VIDIOC_S_MODULATOR"},
+#endif
+#if defined(VIDIOC_G_FREQUENCY)
+{VIDIOC_G_FREQUENCY, "VIDIOC_G_FREQUENCY"},
+#endif
+#if defined(VIDIOC_S_FREQUENCY)
+{VIDIOC_S_FREQUENCY, "VIDIOC_S_FREQUENCY"},
+#endif
+#if defined(VIDIOC_CROPCAP)
+{VIDIOC_CROPCAP, "VIDIOC_CROPCAP"},
+#endif
+#if defined(VIDIOC_G_CROP)
+{VIDIOC_G_CROP, "VIDIOC_G_CROP"},
+#endif
+#if defined(VIDIOC_S_CROP)
+{VIDIOC_S_CROP, "VIDIOC_S_CROP"},
+#endif
+#if defined(VIDIOC_G_JPEGCOMP)
+{VIDIOC_G_JPEGCOMP, "VIDIOC_G_JPEGCOMP"},
+#endif
+#if defined(VIDIOC_S_JPEGCOMP)
+{VIDIOC_S_JPEGCOMP, "VIDIOC_S_JPEGCOMP"},
+#endif
+#if defined(VIDIOC_QUERYSTD)
+{VIDIOC_QUERYSTD, "VIDIOC_QUERYSTD"},
+#endif
+#if defined(VIDIOC_TRY_FMT)
+{VIDIOC_TRY_FMT, "VIDIOC_TRY_FMT"},
+#endif
+#if defined(VIDIOC_ENUMAUDIO)
+{VIDIOC_ENUMAUDIO, "VIDIOC_ENUMAUDIO"},
+#endif
+#if defined(VIDIOC_ENUMAUDOUT)
+{VIDIOC_ENUMAUDOUT, "VIDIOC_ENUMAUDOUT"},
+#endif
+#if defined(VIDIOC_G_PRIORITY)
+{VIDIOC_G_PRIORITY, "VIDIOC_G_PRIORITY"},
+#endif
+#if defined(VIDIOC_S_PRIORITY)
+{VIDIOC_S_PRIORITY, "VIDIOC_S_PRIORITY"},
+#endif
+#if defined(VIDIOC_G_SLICED_VBI_CAP)
+{VIDIOC_G_SLICED_VBI_CAP, "VIDIOC_G_SLICED_VBI_CAP"},
+#endif
+#if defined(VIDIOC_LOG_STATUS)
+{VIDIOC_LOG_STATUS, "VIDIOC_LOG_STATUS"},
+#endif
+#if defined(VIDIOC_G_EXT_CTRLS)
+{VIDIOC_G_EXT_CTRLS, "VIDIOC_G_EXT_CTRLS"},
+#endif
+#if defined(VIDIOC_S_EXT_CTRLS)
+{VIDIOC_S_EXT_CTRLS, "VIDIOC_S_EXT_CTRLS"},
+#endif
+#if defined(VIDIOC_TRY_EXT_CTRLS)
+{VIDIOC_TRY_EXT_CTRLS, "VIDIOC_TRY_EXT_CTRLS"},
+#endif
+#if defined(VIDIOC_ENUM_FRAMESIZES)
+{VIDIOC_ENUM_FRAMESIZES, "VIDIOC_ENUM_FRAMESIZES"},
+#endif
+#if defined(VIDIOC_ENUM_FRAMEINTERVALS)
+{VIDIOC_ENUM_FRAMEINTERVALS, "VIDIOC_ENUM_FRAMEINTERVALS"},
+#endif
+#if defined(VIDIOC_G_ENC_INDEX)
+{VIDIOC_G_ENC_INDEX, "VIDIOC_G_ENC_INDEX"},
+#endif
+#if defined(VIDIOC_ENCODER_CMD)
+{VIDIOC_ENCODER_CMD, "VIDIOC_ENCODER_CMD"},
+#endif
+#if defined(VIDIOC_TRY_ENCODER_CMD)
+{VIDIOC_TRY_ENCODER_CMD, "VIDIOC_TRY_ENCODER_CMD"},
+#endif
+#if defined(VIDIOC_G_CHIP_IDENT)
+{VIDIOC_G_CHIP_IDENT, "VIDIOC_G_CHIP_IDENT"},
+#endif
+
+#if defined(VIDIOC_OVERLAY_OLD)
+{VIDIOC_OVERLAY_OLD, "VIDIOC_OVERLAY_OLD"},
+#endif
+#if defined(VIDIOC_S_PARM_OLD)
+{VIDIOC_S_PARM_OLD, "VIDIOC_S_PARM_OLD"},
+#endif
+#if defined(VIDIOC_S_CTRL_OLD)
+{VIDIOC_S_CTRL_OLD, "VIDIOC_S_CTRL_OLD"},
+#endif
+#if defined(VIDIOC_G_AUDIO_OLD)
+{VIDIOC_G_AUDIO_OLD, "VIDIOC_G_AUDIO_OLD"},
+#endif
+#if defined(VIDIOC_G_AUDOUT_OLD)
+{VIDIOC_G_AUDOUT_OLD, "VIDIOC_G_AUDOUT_OLD"},
+#endif
+#if defined(VIDIOC_CROPCAP_OLD)
+{VIDIOC_CROPCAP_OLD, "VIDIOC_CROPCAP_OLD"},
+#endif
+{0xFFFFFFFF, ""}
+};
+
+static struct mess mess1[] = \
+{
+#if defined(VIDIOCGCAP)
+{VIDIOCGCAP, "VIDIOCGCAP"},
+#endif
+#if defined(VIDIOCGCHAN)
+{VIDIOCGCHAN, "VIDIOCGCHAN"},
+#endif
+#if defined(VIDIOCSCHAN)
+{VIDIOCSCHAN, "VIDIOCSCHAN"},
+#endif
+#if defined(VIDIOCGTUNER)
+{VIDIOCGTUNER, "VIDIOCGTUNER"},
+#endif
+#if defined(VIDIOCSTUNER)
+{VIDIOCSTUNER, "VIDIOCSTUNER"},
+#endif
+#if defined(VIDIOCGPICT)
+{VIDIOCGPICT, "VIDIOCGPICT"},
+#endif
+#if defined(VIDIOCSPICT)
+{VIDIOCSPICT, "VIDIOCSPICT"},
+#endif
+#if defined(VIDIOCCAPTURE)
+{VIDIOCCAPTURE, "VIDIOCCAPTURE"},
+#endif
+#if defined(VIDIOCGWIN)
+{VIDIOCGWIN, "VIDIOCGWIN"},
+#endif
+#if defined(VIDIOCSWIN)
+{VIDIOCSWIN, "VIDIOCSWIN"},
+#endif
+#if defined(VIDIOCGFBUF)
+{VIDIOCGFBUF, "VIDIOCGFBUF"},
+#endif
+#if defined(VIDIOCSFBUF)
+{VIDIOCSFBUF, "VIDIOCSFBUF"},
+#endif
+#if defined(VIDIOCKEY)
+{VIDIOCKEY, "VIDIOCKEY"},
+#endif
+#if defined(VIDIOCGFREQ)
+{VIDIOCGFREQ, "VIDIOCGFREQ"},
+#endif
+#if defined(VIDIOCSFREQ)
+{VIDIOCSFREQ, "VIDIOCSFREQ"},
+#endif
+#if defined(VIDIOCGAUDIO)
+{VIDIOCGAUDIO, "VIDIOCGAUDIO"},
+#endif
+#if defined(VIDIOCSAUDIO)
+{VIDIOCSAUDIO, "VIDIOCSAUDIO"},
+#endif
+#if defined(VIDIOCSYNC)
+{VIDIOCSYNC, "VIDIOCSYNC"},
+#endif
+#if defined(VIDIOCMCAPTURE)
+{VIDIOCMCAPTURE, "VIDIOCMCAPTURE"},
+#endif
+#if defined(VIDIOCGMBUF)
+{VIDIOCGMBUF, "VIDIOCGMBUF"},
+#endif
+#if defined(VIDIOCGUNIT)
+{VIDIOCGUNIT, "VIDIOCGUNIT"},
+#endif
+#if defined(VIDIOCGCAPTURE)
+{VIDIOCGCAPTURE, "VIDIOCGCAPTURE"},
+#endif
+#if defined(VIDIOCSCAPTURE)
+{VIDIOCSCAPTURE, "VIDIOCSCAPTURE"},
+#endif
+#if defined(VIDIOCSPLAYMODE)
+{VIDIOCSPLAYMODE, "VIDIOCSPLAYMODE"},
+#endif
+#if defined(VIDIOCSWRITEMODE)
+{VIDIOCSWRITEMODE, "VIDIOCSWRITEMODE"},
+#endif
+#if defined(VIDIOCGPLAYINFO)
+{VIDIOCGPLAYINFO, "VIDIOCGPLAYINFO"},
+#endif
+#if defined(VIDIOCSMICROCODE)
+{VIDIOCSMICROCODE, "VIDIOCSMICROCODE"},
+#endif
+{0xFFFFFFFF, ""}
+};
+
+k = 0;
+while (mess[k].name[0]) {
+	if (wot == mess[k].command) {
+		JOT(8, "ioctl 0x%08X is %s\n", \
+					mess[k].command, &mess[k].name[0]);
+		return 0;
+	}
+	k++;
+}
+JOT(8, "ioctl 0x%08X is not in videodev2.h\n", wot);
+
+k = 0;
+while (mess1[k].name[0]) {
+	if (wot == mess1[k].command) {
+		JOT(8, "ioctl 0x%08X is %s (V4L1)\n", \
+					mess1[k].command, &mess1[k].name[0]);
+		return 0;
+	}
+	k++;
+}
+JOT(8, "ioctl 0x%08X is not in videodev.h\n", wot);
+return -1;
+}
+/*****************************************************************************/
+int explain_cid(__u32 wot)
+{
+int k;
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE DATA FOR THE ARRAY mess BELOW WERE CONSTRUCTED BY RUNNING THE FOLLOWING
+ *  SHELL SCRIPT:
+ *  #
+ *  cat /usr/src/linux-headers-`uname -r`/include/linux/videodev2.h | \
+ *     grep "^#define V4L2_CID_" |  \
+ *     sed -e "s,(.*$,,;p" | sed -e "N;s,\n,, " | \
+ *     sed -e "s/^#define /  {/;s/#define /, \"/;s/$/\"},/" | \
+ *     sed -e "s,	,,g;s, ,,g" | grep -v "_BASE" | grep -v "MPEG" >cid.tmp
+ *  echo "{0xFFFFFFFF,\"\"}" >>cid.tmp
+ *  exit 0
+ *  #
+ */
+/*---------------------------------------------------------------------------*/
+static struct mess
+{
+__u32 command;
+char  name[64];
+} mess[] = {
+#if defined(V4L2_CID_USER_CLASS)
+{V4L2_CID_USER_CLASS, "V4L2_CID_USER_CLASS"},
+#endif
+#if defined(V4L2_CID_BRIGHTNESS)
+{V4L2_CID_BRIGHTNESS, "V4L2_CID_BRIGHTNESS"},
+#endif
+#if defined(V4L2_CID_CONTRAST)
+{V4L2_CID_CONTRAST, "V4L2_CID_CONTRAST"},
+#endif
+#if defined(V4L2_CID_SATURATION)
+{V4L2_CID_SATURATION, "V4L2_CID_SATURATION"},
+#endif
+#if defined(V4L2_CID_HUE)
+{V4L2_CID_HUE, "V4L2_CID_HUE"},
+#endif
+#if defined(V4L2_CID_AUDIO_VOLUME)
+{V4L2_CID_AUDIO_VOLUME, "V4L2_CID_AUDIO_VOLUME"},
+#endif
+#if defined(V4L2_CID_AUDIO_BALANCE)
+{V4L2_CID_AUDIO_BALANCE, "V4L2_CID_AUDIO_BALANCE"},
+#endif
+#if defined(V4L2_CID_AUDIO_BASS)
+{V4L2_CID_AUDIO_BASS, "V4L2_CID_AUDIO_BASS"},
+#endif
+#if defined(V4L2_CID_AUDIO_TREBLE)
+{V4L2_CID_AUDIO_TREBLE, "V4L2_CID_AUDIO_TREBLE"},
+#endif
+#if defined(V4L2_CID_AUDIO_MUTE)
+{V4L2_CID_AUDIO_MUTE, "V4L2_CID_AUDIO_MUTE"},
+#endif
+#if defined(V4L2_CID_AUDIO_LOUDNESS)
+{V4L2_CID_AUDIO_LOUDNESS, "V4L2_CID_AUDIO_LOUDNESS"},
+#endif
+#if defined(V4L2_CID_BLACK_LEVEL)
+{V4L2_CID_BLACK_LEVEL, "V4L2_CID_BLACK_LEVEL"},
+#endif
+#if defined(V4L2_CID_AUTO_WHITE_BALANCE)
+{V4L2_CID_AUTO_WHITE_BALANCE, "V4L2_CID_AUTO_WHITE_BALANCE"},
+#endif
+#if defined(V4L2_CID_DO_WHITE_BALANCE)
+{V4L2_CID_DO_WHITE_BALANCE, "V4L2_CID_DO_WHITE_BALANCE"},
+#endif
+#if defined(V4L2_CID_RED_BALANCE)
+{V4L2_CID_RED_BALANCE, "V4L2_CID_RED_BALANCE"},
+#endif
+#if defined(V4L2_CID_BLUE_BALANCE)
+{V4L2_CID_BLUE_BALANCE, "V4L2_CID_BLUE_BALANCE"},
+#endif
+#if defined(V4L2_CID_GAMMA)
+{V4L2_CID_GAMMA, "V4L2_CID_GAMMA"},
+#endif
+#if defined(V4L2_CID_WHITENESS)
+{V4L2_CID_WHITENESS, "V4L2_CID_WHITENESS"},
+#endif
+#if defined(V4L2_CID_EXPOSURE)
+{V4L2_CID_EXPOSURE, "V4L2_CID_EXPOSURE"},
+#endif
+#if defined(V4L2_CID_AUTOGAIN)
+{V4L2_CID_AUTOGAIN, "V4L2_CID_AUTOGAIN"},
+#endif
+#if defined(V4L2_CID_GAIN)
+{V4L2_CID_GAIN, "V4L2_CID_GAIN"},
+#endif
+#if defined(V4L2_CID_HFLIP)
+{V4L2_CID_HFLIP, "V4L2_CID_HFLIP"},
+#endif
+#if defined(V4L2_CID_VFLIP)
+{V4L2_CID_VFLIP, "V4L2_CID_VFLIP"},
+#endif
+#if defined(V4L2_CID_HCENTER)
+{V4L2_CID_HCENTER, "V4L2_CID_HCENTER"},
+#endif
+#if defined(V4L2_CID_VCENTER)
+{V4L2_CID_VCENTER, "V4L2_CID_VCENTER"},
+#endif
+#if defined(V4L2_CID_POWER_LINE_FREQUENCY)
+{V4L2_CID_POWER_LINE_FREQUENCY, "V4L2_CID_POWER_LINE_FREQUENCY"},
+#endif
+#if defined(V4L2_CID_HUE_AUTO)
+{V4L2_CID_HUE_AUTO, "V4L2_CID_HUE_AUTO"},
+#endif
+#if defined(V4L2_CID_WHITE_BALANCE_TEMPERATURE)
+{V4L2_CID_WHITE_BALANCE_TEMPERATURE, "V4L2_CID_WHITE_BALANCE_TEMPERATURE"},
+#endif
+#if defined(V4L2_CID_SHARPNESS)
+{V4L2_CID_SHARPNESS, "V4L2_CID_SHARPNESS"},
+#endif
+#if defined(V4L2_CID_BACKLIGHT_COMPENSATION)
+{V4L2_CID_BACKLIGHT_COMPENSATION, "V4L2_CID_BACKLIGHT_COMPENSATION"},
+#endif
+#if defined(V4L2_CID_CHROMA_AGC)
+{V4L2_CID_CHROMA_AGC, "V4L2_CID_CHROMA_AGC"},
+#endif
+#if defined(V4L2_CID_COLOR_KILLER)
+{V4L2_CID_COLOR_KILLER, "V4L2_CID_COLOR_KILLER"},
+#endif
+#if defined(V4L2_CID_LASTP1)
+{V4L2_CID_LASTP1, "V4L2_CID_LASTP1"},
+#endif
+#if defined(V4L2_CID_CAMERA_CLASS)
+{V4L2_CID_CAMERA_CLASS, "V4L2_CID_CAMERA_CLASS"},
+#endif
+#if defined(V4L2_CID_EXPOSURE_AUTO)
+{V4L2_CID_EXPOSURE_AUTO, "V4L2_CID_EXPOSURE_AUTO"},
+#endif
+#if defined(V4L2_CID_EXPOSURE_ABSOLUTE)
+{V4L2_CID_EXPOSURE_ABSOLUTE, "V4L2_CID_EXPOSURE_ABSOLUTE"},
+#endif
+#if defined(V4L2_CID_EXPOSURE_AUTO_PRIORITY)
+{V4L2_CID_EXPOSURE_AUTO_PRIORITY, "V4L2_CID_EXPOSURE_AUTO_PRIORITY"},
+#endif
+#if defined(V4L2_CID_PAN_RELATIVE)
+{V4L2_CID_PAN_RELATIVE, "V4L2_CID_PAN_RELATIVE"},
+#endif
+#if defined(V4L2_CID_TILT_RELATIVE)
+{V4L2_CID_TILT_RELATIVE, "V4L2_CID_TILT_RELATIVE"},
+#endif
+#if defined(V4L2_CID_PAN_RESET)
+{V4L2_CID_PAN_RESET, "V4L2_CID_PAN_RESET"},
+#endif
+#if defined(V4L2_CID_TILT_RESET)
+{V4L2_CID_TILT_RESET, "V4L2_CID_TILT_RESET"},
+#endif
+#if defined(V4L2_CID_PAN_ABSOLUTE)
+{V4L2_CID_PAN_ABSOLUTE, "V4L2_CID_PAN_ABSOLUTE"},
+#endif
+#if defined(V4L2_CID_TILT_ABSOLUTE)
+{V4L2_CID_TILT_ABSOLUTE, "V4L2_CID_TILT_ABSOLUTE"},
+#endif
+#if defined(V4L2_CID_FOCUS_ABSOLUTE)
+{V4L2_CID_FOCUS_ABSOLUTE, "V4L2_CID_FOCUS_ABSOLUTE"},
+#endif
+#if defined(V4L2_CID_FOCUS_RELATIVE)
+{V4L2_CID_FOCUS_RELATIVE, "V4L2_CID_FOCUS_RELATIVE"},
+#endif
+#if defined(V4L2_CID_FOCUS_AUTO)
+{V4L2_CID_FOCUS_AUTO, "V4L2_CID_FOCUS_AUTO"},
+#endif
+{0xFFFFFFFF, ""}
+};
+
+k = 0;
+while (mess[k].name[0]) {
+	if (wot == mess[k].command) {
+		JOT(8, "ioctl 0x%08X is %s\n", \
+					mess[k].command, &mess[k].name[0]);
+		return 0;
+	}
+	k++;
+}
+JOT(8, "cid 0x%08X is not in videodev2.h\n", wot);
+return -1;
+}
+/*****************************************************************************/
diff --git a/drivers/staging/easycap/easycap_ioctl.h b/drivers/staging/easycap/easycap_ioctl.h
new file mode 100644
index 00000000000..210cd627235
--- /dev/null
+++ b/drivers/staging/easycap/easycap_ioctl.h
@@ -0,0 +1,28 @@
+/*****************************************************************************
+*                                                                            *
+*  easycap_ioctl.h                                                           *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+extern struct easycap_format easycap_format[];
+extern struct v4l2_queryctrl easycap_control[];
diff --git a/drivers/staging/easycap/easycap_low.c b/drivers/staging/easycap/easycap_low.c
new file mode 100644
index 00000000000..ad1fc4cc471
--- /dev/null
+++ b/drivers/staging/easycap/easycap_low.c
@@ -0,0 +1,1041 @@
+/*****************************************************************************
+*                                                                            *
+*                                                                            *
+*  easycap_low.c                                                             *
+*                                                                            *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+/*
+ *  ACKNOWLEGEMENTS AND REFERENCES
+ *  ------------------------------
+ *  This driver makes use of register information contained in the Syntek
+ *  Semicon DC-1125 driver hosted at
+ *               http://sourceforge.net/projects/syntekdriver/.
+ *  Particularly useful has been a patch to the latter driver provided by
+ *  Ivor Hewitt in January 2009.  The NTSC implementation is taken from the
+ *  work of Ben Trask.
+*/
+/****************************************************************************/
+
+#include "easycap_debug.h"
+#include "easycap.h"
+
+/*--------------------------------------------------------------------------*/
+const struct stk1160config { int reg; int set; } stk1160config[256] = {
+	{0x000, 0x0098},
+	{0x002, 0x0093},
+
+	{0x001, 0x0003},
+	{0x003, 0x0080},
+	{0x00D, 0x0000},
+	{0x00F, 0x0002},
+	{0x018, 0x0010},
+	{0x019, 0x0000},
+	{0x01A, 0x0014},
+	{0x01B, 0x000E},
+	{0x01C, 0x0046},
+
+	{0x100, 0x0033},
+	{0x103, 0x0000},
+	{0x104, 0x0000},
+	{0x105, 0x0000},
+	{0x106, 0x0000},
+
+#if defined(PREFER_NTSC)
+
+#undef  OLDMARGIN
+#if defined(OLDMARGIN)
+	{0x110, 0x0008},
+#else
+	{0x110, 0x0014},
+#endif /*OLDMARGIN*/
+
+	{0x111, 0x0000},
+	{0x112, 0x0003},
+	{0x113, 0x0000},
+
+#if defined(OLDMARGIN)
+	{0x114, 0x0508},
+#else
+	{0x114, 0x0514},
+#endif /*OLDMARGIN*/
+
+	{0x115, 0x0005},
+	{0x116, 0x00F3},
+	{0x117, 0x0000},
+
+#else /* ! PREFER_NTSC*/
+
+#if defined(OLDMARGIN)
+	{0x110, 0x0008},
+#else
+	{0x110, 0x0014},
+#endif /*OLDMARGIN*/
+
+	{0x111, 0x0000},
+	{0x112, 0x0020},
+	{0x113, 0x0000},
+
+#if defined(OLDMARGIN)
+	{0x114, 0x0508},
+#else
+	{0x114, 0x0514},
+#endif /*OLDMARGIN*/
+
+	{0x115, 0x0005},
+	{0x116, 0x0110},
+	{0x117, 0x0001},
+
+#endif /* ! PREFER_NTSC*/
+
+	{0x202, 0x000F},
+	{0x203, 0x004A},
+	{0x2FF, 0x0000},
+/*---------------------------------------------------------------------------*/
+	{0xFFF, 0xFFFF}
+	};
+/*--------------------------------------------------------------------------*/
+const struct saa7113config { int reg; int set; } saa7113config[256] = {
+	{0x01, 0x08},
+	{0x02, 0x80},
+	{0x03, 0x33},
+	{0x04, 0x00},
+	{0x05, 0x00},
+	{0x06, 0xE9},
+	{0x07, 0x0D},
+#if defined(PREFER_NTSC)
+	{0x08, 0x78},
+#else
+	{0x08, 0x38},
+#endif /* ! PREFER_NTSC*/
+	{0x09, 0x00},
+	{0x0A, SAA_0A_DEFAULT},
+	{0x0B, SAA_0B_DEFAULT},
+	{0x0C, SAA_0C_DEFAULT},
+	{0x0D, SAA_0D_DEFAULT},
+	{0x0E, 0x01},
+	{0x0F, 0x36},
+	{0x10, 0x00},
+	{0x11, 0x0C},
+	{0x12, 0xE7},
+	{0x13, 0x00},
+	{0x15, 0x00},
+	{0x16, 0x00},
+#if defined(PREFER_NTSC)
+	{0x40, 0x82},
+#else
+	{0x40, 0x02},
+#endif /* ! PREFER_NTSC*/
+	{0x41, 0xFF},
+	{0x42, 0xFF},
+	{0x43, 0xFF},
+	{0x44, 0xFF},
+	{0x45, 0xFF},
+	{0x46, 0xFF},
+	{0x47, 0xFF},
+	{0x48, 0xFF},
+	{0x49, 0xFF},
+	{0x4A, 0xFF},
+	{0x4B, 0xFF},
+	{0x4C, 0xFF},
+	{0x4D, 0xFF},
+	{0x4E, 0xFF},
+	{0x4F, 0xFF},
+	{0x50, 0xFF},
+	{0x51, 0xFF},
+	{0x52, 0xFF},
+	{0x53, 0xFF},
+	{0x54, 0xFF},
+	{0x55, 0xFF},
+	{0x56, 0xFF},
+	{0x57, 0xFF},
+	{0x58, 0x40},
+	{0x59, 0x54},
+#if defined(PREFER_NTSC)
+	{0x5A, 0x0A},
+#else
+	{0x5A, 0x07},
+#endif /* ! PREFER_NTSC*/
+	{0x5B, 0x83},
+	{0xFF, 0xFF}
+	};
+/*--------------------------------------------------------------------------*/
+
+/****************************************************************************/
+int
+confirm_resolution(struct usb_device *p)
+{
+__u8 get0, get1, get2, get3, get4, get5, get6, get7;
+GET(p, 0x0110, &get0);
+GET(p, 0x0111, &get1);
+GET(p, 0x0112, &get2);
+GET(p, 0x0113, &get3);
+GET(p, 0x0114, &get4);
+GET(p, 0x0115, &get5);
+GET(p, 0x0116, &get6);
+GET(p, 0x0117, &get7);
+JOT(8,  "0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X\n", \
+	get0, get1, get2, get3, get4, get5, get6, get7);
+JOT(8,  "....cf PAL_720x526: " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X\n", \
+	0x000, 0x000, 0x001, 0x000, 0x5A0, 0x005, 0x121, 0x001);
+JOT(8,  "....cf PAL_704x526: " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X\n", \
+	0x004, 0x000, 0x001, 0x000, 0x584, 0x005, 0x121, 0x001);
+JOT(8,  "....cf VGA_640x480: " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X, " \
+	"0x%03X, 0x%03X\n", \
+	0x008, 0x000, 0x020, 0x000, 0x508, 0x005, 0x110, 0x001);
+return 0;
+}
+/****************************************************************************/
+int
+confirm_stream(struct usb_device *p)
+{
+__u16 get2;
+__u8 igot;
+
+GET(p, 0x0100, &igot);  get2 = 0x80 & igot;
+if (0x80 == get2)
+	JOT(8, "confirm_stream:  OK\n");
+else
+	JOT(8, "confirm_stream:  STUCK\n");
+return 0;
+}
+/****************************************************************************/
+int
+setup_stk(struct usb_device *p)
+{
+int i0;
+
+i0 = 0;
+while (0xFFF != stk1160config[i0].reg) {
+	SET(p, stk1160config[i0].reg, stk1160config[i0].set);
+	i0++;
+	}
+
+write_300(p);
+
+return 0;
+}
+/****************************************************************************/
+int
+setup_saa(struct usb_device *p)
+{
+int i0, ir;
+
+
+set2to78(p);
+
+
+i0 = 0;
+while (0xFF != saa7113config[i0].reg) {
+	ir = write_saa(p, saa7113config[i0].reg, saa7113config[i0].set);
+	i0++;
+	}
+return 0;
+}
+/****************************************************************************/
+int
+write_000(struct usb_device *p, __u16 set2, __u16 set0)
+{
+__u8 igot0, igot2;
+
+GET(p, 0x0002, &igot2);
+GET(p, 0x0000, &igot0);
+SET(p, 0x0002, set2);
+SET(p, 0x0000, set0);
+return 0;
+}
+/****************************************************************************/
+int
+write_saa(struct usb_device *p, __u16 reg0, __u16 set0)
+{
+SET(p, 0x200, 0x00);
+SET(p, 0x204, reg0);
+SET(p, 0x205, set0);
+SET(p, 0x200, 0x01);
+return wait_i2c(p);
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  REGISTER 500:  SETTING VALUE TO 0x008B READS FROM VT1612A (?)
+ *  REGISTER 500:  SETTING VALUE TO 0x008C WRITES TO  VT1612A
+ *  REGISTER 502:  LEAST SIGNIFICANT BYTE OF VALUE TO SET
+ *  REGISTER 503:  MOST SIGNIFICANT BYTE OF VALUE TO SET
+ *  REGISTER 504:  TARGET ADDRESS ON VT1612A
+ */
+/*--------------------------------------------------------------------------*/
+int
+write_vt(struct usb_device *p, __u16 reg0, __u16 set0)
+{
+__u8 igot;
+__u16 got502, got503;
+__u16 set502, set503;
+
+SET(p, 0x0504, reg0);
+SET(p, 0x0500, 0x008B);
+
+GET(p, 0x0502, &igot);  got502 = (0xFF & igot);
+GET(p, 0x0503, &igot);  got503 = (0xFF & igot);
+
+JOT(16, "write_vt(., 0x%04X, 0x%04X): was 0x%04X\n", \
+					reg0, set0, ((got503 << 8) | got502));
+
+set502 =  (0x00FF & set0);
+set503 = ((0xFF00 & set0) >> 8);
+
+SET(p, 0x0504, reg0);
+SET(p, 0x0502, set502);
+SET(p, 0x0503, set503);
+SET(p, 0x0500, 0x008C);
+
+return 0;
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  REGISTER 500:  SETTING VALUE TO 0x008B READS FROM VT1612A (?)
+ *  REGISTER 500:  SETTING VALUE TO 0x008C WRITES TO  VT1612A
+ *  REGISTER 502:  LEAST SIGNIFICANT BYTE OF VALUE TO GET
+ *  REGISTER 503:  MOST SIGNIFICANT BYTE OF VALUE TO GET
+ *  REGISTER 504:  TARGET ADDRESS ON VT1612A
+ */
+/*--------------------------------------------------------------------------*/
+int
+read_vt(struct usb_device *p, __u16 reg0)
+{
+__u8 igot;
+__u16 got502, got503;
+
+SET(p, 0x0504, reg0);
+SET(p, 0x0500, 0x008B);
+
+GET(p, 0x0502, &igot);  got502 = (0xFF & igot);
+GET(p, 0x0503, &igot);  got503 = (0xFF & igot);
+
+JOT(16, "read_vt(., 0x%04X): has 0x%04X\n", reg0, ((got503 << 8) | got502));
+
+return (got503 << 8) | got502;
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  THESE APPEAR TO HAVE NO EFFECT ON EITHER VIDEO OR AUDIO.
+ */
+/*--------------------------------------------------------------------------*/
+int
+write_300(struct usb_device *p)
+{
+SET(p, 0x300, 0x0012);
+SET(p, 0x350, 0x002D);
+SET(p, 0x351, 0x0001);
+SET(p, 0x352, 0x0000);
+SET(p, 0x353, 0x0000);
+SET(p, 0x300, 0x0080);
+return 0;
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  NOTE: THE FOLLOWING IS NOT CHECKED:
+ *  REGISTER 0x0F, WHICH IS INVOLVED IN CHROMINANCE AUTOMATIC GAIN CONTROL.
+ */
+/*--------------------------------------------------------------------------*/
+int
+check_saa(struct usb_device *p)
+{
+int i0, ir, rc;
+i0 = 0;
+
+rc = 0;
+while (0xFF != saa7113config[i0].reg) {
+	if (0x0F == saa7113config[i0].reg) {
+		i0++; continue;
+	}
+
+	ir = read_saa(p, saa7113config[i0].reg);
+	if (ir != saa7113config[i0].set) {
+		SAY("SAA register 0x%02X has 0x%02X, expected 0x%02X\n", \
+			saa7113config[i0].reg, ir, saa7113config[i0].set);
+		rc--;
+	}
+	i0++;
+}
+if (-8 > rc)
+	return rc;
+else
+	return 0;
+}
+/****************************************************************************/
+int
+merit_saa(struct usb_device *p)
+{
+int rc;
+
+rc = read_saa(p, 0x1F);
+if ((0 > rc) || (0x02 & rc))
+	return 1 ;
+else
+	return 0;
+}
+/****************************************************************************/
+int
+ready_saa(struct usb_device *p)
+{
+int j, rc;
+static int max = 10;
+
+j = 0;
+while (max > j) {
+	rc = read_saa(p, 0x1F);
+	if (0 <= rc) {
+		if ((1 == (0x01 & rc))&&(0 == (0x40 & rc)))
+			break;
+	}
+	msleep(100);  j++;
+}
+if (max == j)
+	return -1;
+else {
+	if (0x20 & rc)
+		JOT(8, "hardware detects 60 Hz\n");
+	else
+		JOT(8, "hardware detects 50 Hz\n");
+	if (0x80 & rc)
+		JOT(8, "hardware detects interlacing\n");
+	else
+		JOT(8, "hardware detects no interlacing\n");
+}
+return 0;
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  NOTE: THE FOLLOWING ARE NOT CHECKED:
+ *  REGISTERS 0x000, 0x002:  FUNCTIONALITY IS NOT KNOWN
+ *  REGISTER  0x100:  ACCEPT ALSO (0x80 | stk1160config[.].set)
+ */
+/*--------------------------------------------------------------------------*/
+int
+check_stk(struct usb_device *p)
+{
+int i0, ir;
+i0 = 0;
+while (0xFFF != stk1160config[i0].reg) {
+	if (0x000 == stk1160config[i0].reg) {
+		i0++; continue;
+	}
+	if (0x002 == stk1160config[i0].reg) {
+		i0++; continue;
+	}
+
+	ir = read_stk(p, stk1160config[i0].reg);
+
+	if (0x100 == stk1160config[i0].reg) {
+		if ((ir != (0xFF & stk1160config[i0].set)) && \
+			(ir != (0x80 | (0xFF & stk1160config[i0].set))) && \
+				(0xFFFF != stk1160config[i0].set)) {
+			SAY("STK register 0x%03X has 0x%02X, " \
+					"expected 0x%02X\n", \
+					stk1160config[i0].reg, ir, \
+					stk1160config[i0].set);
+			}
+		i0++; continue;
+		}
+
+	if ((ir != (0xFF & stk1160config[i0].set)) && \
+			(0xFFFF != stk1160config[i0].set)) {
+		SAY("STK register 0x%03X has 0x%02X, " \
+					"expected 0x%02X\n", \
+					stk1160config[i0].reg, ir, \
+					stk1160config[i0].set);
+		}
+	i0++;
+	}
+return 0;
+}
+/****************************************************************************/
+int
+read_saa(struct usb_device *p, __u16 reg0)
+{
+__u8 igot;
+
+SET(p, 0x208, reg0);
+SET(p, 0x200, 0x20);
+if (0 != wait_i2c(p))
+	return -1;
+igot = 0;
+GET(p, 0x0209, &igot);
+return igot;
+}
+/****************************************************************************/
+int
+read_stk(struct usb_device *p, __u32 reg0)
+{
+__u8 igot;
+
+igot = 0;
+GET(p, reg0, &igot);
+return igot;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *    HARDWARE    USERSPACE INPUT NUMBER   PHYSICAL INPUT   DRIVER input VALUE
+ *
+ *  CVBS+S-VIDEO           0 or 1              CVBS                 1
+ *   FOUR-CVBS             0 or 1              CVBS1                1
+ *   FOUR-CVBS                2                CVBS2                2
+ *   FOUR-CVBS                3                CVBS3                3
+ *   FOUR-CVBS                4                CVBS4                4
+ *  CVBS+S-VIDEO              5               S-VIDEO               5
+ *
+ *  WHEN 5==input THE ARGUMENT mode MUST ALSO BE SUPPLIED:
+ *
+ *     mode  7   => GAIN TO BE SET EXPLICITLY USING REGISTER 0x05 (UNTESTED)
+ *     mode  9   => USE AUTOMATIC GAIN CONTROL (DEFAULT)
+ *
+*/
+/*---------------------------------------------------------------------------*/
+int
+select_input(struct usb_device *p, int input, int mode)
+{
+
+stop_100(p);
+
+msleep(20);
+switch (input) {
+case 0:
+case 1: {
+	SET(p, 0x0000, 0x0098); break;
+}
+case 2: {
+	SET(p, 0x0000, 0x0090); break;
+}
+case 3: {
+	SET(p, 0x0000, 0x0088); break;
+}
+case 4: {
+	SET(p, 0x0000, 0x0080); break;
+}
+case 5: {
+	if (9 != mode)
+		mode = 7;
+	switch (mode) {
+	case 7:
+		{
+		if (0 != write_saa(p, 0x02, 0x87)) {
+			SAY("ERROR: failed to set SAA " \
+				"register 0x02 for input " \
+				"%i\n", input);
+		}
+		if (0 != write_saa(p, 0x05, 0xFF)) {
+			SAY("ERROR: failed to set SAA " \
+				"register 0x05 for input " \
+				"%i\n", input);
+		}
+		break;
+	}
+	case 9:
+		{
+		if (0 != write_saa(p, 0x02, 0x89)) {
+			SAY("ERROR: failed to set SAA " \
+				"register 0x02 for input " \
+				"%i\n", input);
+		}
+		if (0 != write_saa(p, 0x05, 0x00)) {
+			SAY("ERROR: failed to set SAA " \
+				"register 0x05 for input " \
+				"%i\n", input);
+		}
+		break;
+	}
+	default:
+		{
+		SAY("MISTAKE:  bad mode: %i\n", mode);
+		return -1;
+		}
+	}
+	if (0 != write_saa(p, 0x04, 0x00)) {
+		SAY("ERROR: failed to set SAA register 0x04 " \
+					"for input %i\n", input);
+	}
+	if (0 != write_saa(p, 0x09, 0x80)) {
+		SAY("ERROR: failed to set SAA register 0x09 " \
+					"for input %i\n", input);
+	}
+	break;
+}
+default:
+	{
+	SAY("ERROR:  bad input: %i\n", input);
+	return -1;
+}
+}
+msleep(20);
+SET(p, 0x0002, 0x0093);
+msleep(20);
+
+start_100(p);
+
+return 0;
+}
+/****************************************************************************/
+int
+set_resolution(struct usb_device *p, \
+				__u16 set0, __u16 set1, __u16 set2, __u16 set3)
+{
+__u16 u0x0111, u0x0113, u0x0115, u0x0117;
+
+u0x0111 = ((0xFF00 & set0) >> 8);
+u0x0113 = ((0xFF00 & set1) >> 8);
+u0x0115 = ((0xFF00 & set2) >> 8);
+u0x0117 = ((0xFF00 & set3) >> 8);
+
+SET(p, 0x0110, (0x00FF & set0));
+SET(p, 0x0111, u0x0111);
+SET(p, 0x0112, (0x00FF & set1));
+SET(p, 0x0113, u0x0113);
+SET(p, 0x0114, (0x00FF & set2));
+SET(p, 0x0115, u0x0115);
+SET(p, 0x0116, (0x00FF & set3));
+SET(p, 0x0117, u0x0117);
+
+return 0;
+}
+/****************************************************************************/
+int
+start_100(struct usb_device *p)
+{
+__u16 get0;
+__u8 igot;
+
+GET(p, 0x0100, &igot);  get0 = igot;
+msleep(0x1f4);
+SET(p, 0x0100, (0x80 | get0));
+msleep(0x1f4);
+return 0;
+}
+/****************************************************************************/
+int
+stop_100(struct usb_device *p)
+{
+__u16 get0;
+__u8 igot;
+
+GET(p, 0x0100, &igot);  get0 = igot;
+msleep(0x1f4);
+SET(p, 0x0100, (0x7F & get0));
+msleep(0x1f4);
+return 0;
+}
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  FUNCTION wait_i2c() RETURNS 0 ON SUCCESS
+*/
+/*--------------------------------------------------------------------------*/
+int
+wait_i2c(struct usb_device *p)
+{
+__u16 get0;
+__u8 igot;
+const int max = 4;
+int k;
+
+for (k = 0;  k < max;  k++) {
+	GET(p, 0x0201, &igot);  get0 = igot;
+	switch (get0) {
+	case 0x04:
+	case 0x01: {
+		return 0;
+	}
+	case 0x00: {
+		msleep(10);
+		continue;
+	}
+	default: {
+		return get0 - 1;
+	}
+	}
+}
+return -1;
+}
+/****************************************************************************/
+int
+regset(struct usb_device *pusb_device, __u16 index, __u16 value)
+{
+__u16 igot;
+int rc0, rc1;
+
+if (!pusb_device)
+	return -EFAULT;
+
+rc1 = 0;  igot = 0;
+rc0 = usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0), \
+		(__u8)0x01, \
+		(__u8)(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE), \
+		(__u16)value, \
+		(__u16)index, \
+		(void *)NULL, \
+		(__u16)0, \
+		(int)500);
+
+#if defined(NOREADBACK)
+#
+#else
+rc1 = usb_control_msg(pusb_device, usb_rcvctrlpipe(pusb_device, 0), \
+		(__u8)0x00, \
+		(__u8)(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE), \
+		(__u16)0x00, \
+		(__u16)index, \
+		(void *)&igot, \
+		(__u16)sizeof(__u16), \
+		(int)50000);
+igot = 0xFF & igot;
+switch (index) {
+case 0x000:
+case 0x500:
+case 0x502:
+case 0x503:
+case 0x504:
+case 0x506:
+case 0x507: {
+	break;
+}
+case 0x204:
+case 0x205:
+case 0x350:
+case 0x351: {
+	if (0 != igot) {
+		JOT(8, "unexpected 0x%02X for STK register 0x%03X\n", \
+								igot, index);
+	}
+break;
+}
+case 0x114:
+case 0x116: {
+	if ((0xFF & value) != igot) {
+		JOT(8, "unexpected 0x%02X != 0x%02X " \
+						"for STK register 0x%03X\n", \
+						igot, value, index);
+	}
+break;
+}
+case 0x200: {
+	if (0 == igot)
+		break;
+}
+default: {
+	if (value != igot) {
+		JOT(8, "unexpected 0x%02X != 0x%02X " \
+					"for STK register 0x%03X\n", \
+					igot, value, index);
+	}
+break;
+}
+}
+#endif /* ! NOREADBACK*/
+
+return (0 > rc0) ? rc0 : rc1;
+}
+/*****************************************************************************/
+int
+regget(struct usb_device *pusb_device, __u16 index, void *pvoid)
+{
+int ir;
+
+if (!pusb_device)
+	return -EFAULT;
+
+ir = usb_control_msg(pusb_device, usb_rcvctrlpipe(pusb_device, 0), \
+		(__u8)0x00, \
+		(__u8)(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE), \
+		(__u16)0x00, \
+		(__u16)index, \
+		(void *)pvoid, \
+		sizeof(__u8), \
+		(int)50000);
+return 0xFF & ir;
+}
+/*****************************************************************************/
+int
+wakeup_device(struct usb_device *pusb_device)
+{
+return usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0), \
+		(__u8)USB_REQ_SET_FEATURE, \
+		(__u8)(USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE), \
+		USB_DEVICE_REMOTE_WAKEUP, \
+		(__u16)0, \
+		(void *) NULL, \
+		(__u16)0, \
+		(int)50000);
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *                                IMPORTANT:
+ *  THE MESSAGE OF TYPE (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)
+ *  CAUSES MUTING IF THE VALUE 0x0100 IS SENT.
+ *  TO ENABLE AUDIO  THE VALUE 0x0200 MUST BE SENT.
+ */
+/*---------------------------------------------------------------------------*/
+int
+audio_setup(struct easycap *peasycap)
+{
+struct usb_device *pusb_device;
+static __u8 request = 0x01;
+static __u8 requesttype = \
+		(__u8)(USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+
+static __u16 value_unmute = 0x0200;
+static __u16 index = 0x0301;
+
+static unsigned char buffer[1];
+static __u16 length = 1;
+int rc, id1, id2;
+
+if (NULL == peasycap)
+	return -EFAULT;
+
+pusb_device = peasycap->pusb_device;
+if (NULL == pusb_device)
+	return -EFAULT;
+
+JOT(8, "%02X %02X %02X %02X %02X %02X %02X %02X\n",	\
+			requesttype, request,		\
+			(0x00FF & value_unmute),	\
+			(0xFF00 & value_unmute) >> 8,	\
+			(0x00FF & index),		\
+			(0xFF00 & index) >> 8,		\
+			(0x00FF & length),		\
+			(0xFF00 & length) >> 8);
+
+buffer[0] = 0x01;
+
+rc = usb_control_msg(pusb_device, usb_sndctrlpipe(pusb_device, 0),	\
+			(__u8)request,					\
+			(__u8)requesttype,				\
+			(__u16)value_unmute,				\
+			(__u16)index,					\
+			(void *)&buffer[0],				\
+			(__u16)length,					\
+			(int)50000);
+
+JOT(8, "0x%02X=buffer\n", *((__u8 *) &buffer[0]));
+if (rc != (int)length)
+	SAY("ERROR: usb_control_msg returned %i\n", rc);
+
+/*--------------------------------------------------------------------------*/
+/*
+ *  REGISTER 500:  SETTING VALUE TO 0x0094 RESETS AUDIO CONFIGURATION ???
+ *  REGISTER 506:  ANALOGUE AUDIO ATTENTUATOR ???
+ *                 FOR THE CVBS+S-VIDEO HARDWARE:
+ *                    SETTING VALUE TO 0x0000 GIVES QUIET SOUND.
+ *                    THE UPPER BYTE SEEMS TO HAVE NO EFFECT.
+ *                 FOR THE FOUR-CVBS HARDWARE:
+ *                    SETTING VALUE TO 0x0000 SEEMS TO HAVE NO EFFECT.
+ *  REGISTER 507:  ANALOGUE AUDIO PREAMPLIFIER ON/OFF ???
+ *                 FOR THE CVBS-S-VIDEO HARDWARE:
+ *                    SETTING VALUE TO 0x0001 GIVES VERY LOUD, DISTORTED SOUND.
+ *                    THE UPPER BYTE SEEMS TO HAVE NO EFFECT.
+ */
+/*--------------------------------------------------------------------------*/
+
+SET(pusb_device, 0x0500, 0x0094);
+
+SET(pusb_device, 0x0500, 0x008C);
+
+SET(pusb_device, 0x0506, 0x0001);
+SET(pusb_device, 0x0507, 0x0000);
+
+id1 = read_vt(pusb_device, 0x007C);
+id2 = read_vt(pusb_device, 0x007E);
+SAY("0x%04X:0x%04X is audio vendor id\n", id1, id2);
+
+/*---------------------------------------------------------------------------*/
+/*
+*   SELECT AUDIO SOURCE "LINE IN" AND SET DEFAULT GAIN TO 0 dB.
+*
+*   THESE COMMANDS SEEM TO BE ACCEPTED (THOUGH POSSIBLY IGNORED) EVEN WHEN
+*   THERE IS NO SEPARATE AUDIO CHIP PRESENT.
+*/
+/*---------------------------------------------------------------------------*/
+
+write_vt(pusb_device, 0x0002, 0x8000);
+write_vt(pusb_device, 0x001C, 0x8000);
+
+write_vt(pusb_device, 0x000E, 0x0000);
+write_vt(pusb_device, 0x0010, 0x0000);
+write_vt(pusb_device, 0x0012, 0x8000);
+write_vt(pusb_device, 0x0016, 0x0000);
+
+write_vt(pusb_device, 0x001A, 0x0404);
+write_vt(pusb_device, 0x0002, 0x0000);
+write_vt(pusb_device, 0x001C, 0x0000);
+
+check_vt(pusb_device);
+
+return 0;
+}
+/*****************************************************************************/
+int
+check_vt(struct usb_device *pusb_device)
+{
+int igot;
+
+igot = read_vt(pusb_device, 0x0002);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x02\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x02);
+
+igot = read_vt(pusb_device, 0x000E);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x0E\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x0E);
+
+igot = read_vt(pusb_device, 0x0010);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x10\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x10);
+
+igot = read_vt(pusb_device, 0x0012);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x12\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x12);
+
+igot = read_vt(pusb_device, 0x0016);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x16\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x16);
+
+igot = read_vt(pusb_device, 0x001A);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x1A\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x1A);
+
+igot = read_vt(pusb_device, 0x001C);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x1C\n");
+if (0x8000 & igot)
+	SAY("register 0x%02X muted\n", 0x1C);
+
+return 0;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  NOTE:  THIS DOES INCREASE THE VOLUME DRAMATICALLY:
+ *         audio_gainset(pusb_device, 0x000F);
+ *
+ *  IF 16<loud<31 VT1621A REGISTER 0x1C IS SET FOR POSITIVE GAIN.
+ *  IF loud<=16 VT1621A REGISTER 0x1C IS SET FOR ZERO GAIN.
+ *  THERE IS NEVER ANY (ADDITIONAL) ATTENUATION.
+ */
+/*---------------------------------------------------------------------------*/
+int
+audio_gainset(struct usb_device *pusb_device, __s8 loud)
+{
+int igot;
+__u8 u8;
+__u16 mute;
+
+if (16 > loud)
+	loud = 16;
+u8 = 0x000F & (__u8)(loud - 16);
+
+write_vt(pusb_device, 0x0002, 0x8000);
+
+igot = read_vt(pusb_device, 0x001C);
+if (0 > igot) {
+	SAY("ERROR: failed to read VT1612A register 0x1C\n");
+	mute = 0x0000;
+} else
+	mute = 0x8000 & ((unsigned int)igot);
+
+JOT(8, "0x%04X=(mute|u8|(u8<<8))\n", mute | u8 | (u8 << 8));
+
+write_vt(pusb_device, 0x001C, 0x8000);
+write_vt(pusb_device, 0x001C, (mute | u8 | (u8 << 8)));
+write_vt(pusb_device, 0x0002, 0x0000);
+
+return 0;
+}
+/*****************************************************************************/
+int
+audio_gainget(struct usb_device *pusb_device)
+{
+int igot;
+
+igot = read_vt(pusb_device, 0x001C);
+if (0 > igot)
+	SAY("ERROR: failed to read VT1612A register 0x1C\n");
+return igot;
+}
+/*****************************************************************************/
+int
+set2to78(struct usb_device *p)
+{
+int ir;
+
+msleep(20);
+ir = regset(p, 0x0002, 0x0078);
+if (0 > ir)
+	SAY("ERROR: failed to set register 0x0002 to 0x0078\n");
+msleep(20);
+return ir;
+}
+/*****************************************************************************/
+int
+set2to93(struct usb_device *p)
+{
+int ir;
+
+msleep(20);
+ir = regset(p, 0x0002, 0x0093);
+if (0 > ir)
+	SAY("ERROR: failed to set register 0x0002 to 0x0078\n");
+msleep(20);
+return ir;
+}
+/*****************************************************************************/
diff --git a/drivers/staging/easycap/easycap_main.c b/drivers/staging/easycap/easycap_main.c
new file mode 100644
index 00000000000..09c194ce10a
--- /dev/null
+++ b/drivers/staging/easycap/easycap_main.c
@@ -0,0 +1,4354 @@
+/******************************************************************************
+*                                                                             *
+*  easycap_main.c                                                             *
+*                                                                             *
+*  Video driver for EasyCAP USB2.0 Video Capture Device DC60                  *
+*                                                                             *
+*                                                                             *
+******************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+
+#include "easycap.h"
+#include "easycap_standard.h"
+
+int easycap_debug;
+module_param(easycap_debug, int, S_IRUGO | S_IWUSR);
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  PARAMETERS APPLICABLE TO ENTIRE DRIVER, I.E. BOTH VIDEO AND AUDIO
+ */
+/*---------------------------------------------------------------------------*/
+struct usb_device_id easycap_usb_device_id_table[] = {
+{ USB_DEVICE(USB_EASYCAP_VENDOR_ID, USB_EASYCAP_PRODUCT_ID) },
+{ }
+};
+MODULE_DEVICE_TABLE(usb, easycap_usb_device_id_table);
+struct usb_driver easycap_usb_driver = {
+.name = "easycap",
+.id_table = easycap_usb_device_id_table,
+.probe = easycap_usb_probe,
+.disconnect = easycap_usb_disconnect,
+};
+/*---------------------------------------------------------------------------*/
+/*
+ *  PARAMETERS USED WHEN REGISTERING THE VIDEO INTERFACE
+ *
+ *  NOTE: SOME KERNELS IGNORE usb_class_driver.minor_base, AS MENTIONED BY
+ *        CORBET ET AL. "LINUX DEVICE DRIVERS", 3rd EDITION, PAGE 253.
+ *        THIS IS THE CASE FOR OpenSUSE.
+ */
+/*---------------------------------------------------------------------------*/
+const struct file_operations easycap_fops = {
+.owner =   THIS_MODULE,
+.open =    easycap_open,
+.release = easycap_release,
+.ioctl =   easycap_ioctl,
+.poll =    easycap_poll,
+.mmap =    easycap_mmap,
+.llseek =  no_llseek,
+};
+struct vm_operations_struct easycap_vm_ops = {
+.open  = easycap_vma_open,
+.close = easycap_vma_close,
+.fault = easycap_vma_fault,
+};
+struct usb_class_driver easycap_class = {
+.name = "usb/easycap%d",
+.fops = &easycap_fops,
+.minor_base = USB_SKEL_MINOR_BASE,
+};
+
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+#if defined(EASYCAP_NEEDS_V4L2_FOPS)
+const struct v4l2_file_operations v4l2_fops = {
+.owner =   THIS_MODULE,
+.open =    easycap_open_noinode,
+.release = easycap_release_noinode,
+.ioctl =   easycap_ioctl_noinode,
+.poll =    easycap_poll,
+.mmap =    easycap_mmap,
+};
+#endif /*EASYCAP_NEEDS_V4L2_FOPS*/
+int video_device_many /*=0*/;
+struct video_device *pvideo_array[VIDEO_DEVICE_MANY], *pvideo_device;
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+
+/*--------------------------------------------------------------------------*/
+/*
+ *  PARAMETERS USED WHEN REGISTERING THE AUDIO INTERFACE
+ */
+/*--------------------------------------------------------------------------*/
+const struct file_operations easysnd_fops = {
+.owner =   THIS_MODULE,
+.open =    easysnd_open,
+.release = easysnd_release,
+.ioctl =   easysnd_ioctl,
+.read =    easysnd_read,
+.llseek =  no_llseek,
+};
+struct usb_class_driver easysnd_class = {
+.name = "usb/easysnd%d",
+.fops = &easysnd_fops,
+.minor_base = USB_SKEL_MINOR_BASE,
+};
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  IT IS NOT APPROPRIATE FOR easycap_open() TO SUBMIT THE VIDEO URBS HERE,
+ *  BECAUSE THERE WILL ALWAYS BE SUBSEQUENT NEGOTIATION OF TV STANDARD AND
+ *  FORMAT BY IOCTL AND IT IS INADVISABLE TO HAVE THE URBS RUNNING WHILE
+ *  REGISTERS OF THE SA7113H ARE BEING MANIPULATED.
+ *
+ *  THE SUBMISSION OF VIDEO URBS IS THEREFORE DELAYED UNTIL THE IOCTL COMMAND
+ *  STREAMON IS RECEIVED.
+ */
+/*--------------------------------------------------------------------------*/
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+int
+easycap_open_noinode(struct file *file)
+{
+return easycap_open((struct inode *)NULL, file);
+}
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+int
+easycap_open(struct inode *inode, struct file *file)
+{
+#if (!defined(EASYCAP_IS_VIDEODEV_CLIENT))
+struct usb_interface *pusb_interface;
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+struct usb_device *p;
+struct easycap *peasycap;
+int i, k, m, rc;
+
+JOT(4, "\n");
+SAY("==========OPEN=========\n");
+
+peasycap = (struct easycap *)NULL;
+#if (!defined(EASYCAP_IS_VIDEODEV_CLIENT))
+if ((struct inode *)NULL == inode) {
+	SAY("ERROR: inode is NULL.\n");
+	return -EFAULT;
+}
+pusb_interface = usb_find_interface(&easycap_usb_driver, iminor(inode));
+if (!pusb_interface) {
+	SAY("ERROR: pusb_interface is NULL.\n");
+	return -EFAULT;
+}
+peasycap = usb_get_intfdata(pusb_interface);
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#else
+for (i = 0;  i < video_device_many;  i++) {
+	pvideo_device = pvideo_array[i];
+	if ((struct video_device *)NULL != pvideo_device) {
+		peasycap = (struct easycap *)video_get_drvdata(pvideo_device);
+		break;
+	}
+}
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+if ((struct easycap *)NULL == peasycap) {
+	SAY("MISTAKE: peasycap is NULL\n");
+	return -EFAULT;
+}
+file->private_data = peasycap;
+/*---------------------------------------------------------------------------*/
+/*
+ *  INITIALIZATION
+ */
+/*---------------------------------------------------------------------------*/
+JOT(4, "starting initialization\n");
+
+for (k = 0;  k < FRAME_BUFFER_MANY;  k++) {
+	for (m = 0;  m < FRAME_BUFFER_SIZE/PAGE_SIZE;  m++)
+		memset(peasycap->frame_buffer[k][m].pgo, 0, PAGE_SIZE);
+}
+p = peasycap->pusb_device;
+if ((struct usb_device *)NULL == p) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+} else {
+	JOT(16, "0x%08lX=peasycap->pusb_device\n", \
+					(long int)peasycap->pusb_device);
+}
+rc = wakeup_device(peasycap->pusb_device);
+if (0 == rc)
+	JOT(8, "wakeup_device() OK\n");
+else {
+	SAY("ERROR: wakeup_device() returned %i\n", rc);
+	return -EFAULT;
+}
+rc = setup_stk(p);  peasycap->input = 0;
+if (0 == rc)
+	JOT(8, "setup_stk() OK\n");
+else {
+	SAY("ERROR: setup_stk() returned %i\n", rc);
+	return -EFAULT;
+}
+rc = setup_saa(p);
+if (0 == rc)
+	JOT(8, "setup_saa() OK\n");
+else {
+	SAY("ERROR: setup_saa() returned %i\n", rc);
+	return -EFAULT;
+}
+rc = check_saa(p);
+if (0 == rc)
+	JOT(8, "check_saa() OK\n");
+else if (-8 < rc)
+	SAY("check_saa() returned %i\n", rc);
+else {
+	SAY("ERROR: check_saa() returned %i\n", rc);
+	return -EFAULT;
+}
+peasycap->standard_offset = -1;
+/*---------------------------------------------------------------------------*/
+#if defined(PREFER_NTSC)
+
+rc = adjust_standard(peasycap, V4L2_STD_NTSC_M);
+if (0 == rc)
+	JOT(8, "adjust_standard(.,NTSC_M) OK\n");
+else {
+	SAY("ERROR: adjust_standard(.,NTSC_M) returned %i\n", rc);
+	return -EFAULT;
+}
+rc = adjust_format(peasycap, 640, 480, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE, \
+									false);
+if (0 <= rc)
+	JOT(8, "adjust_format(.,640,480,UYVY) OK\n");
+else {
+	SAY("ERROR: adjust_format(.,640,480,UYVY) returned %i\n", rc);
+	return -EFAULT;
+}
+
+#else
+
+rc = adjust_standard(peasycap, \
+		(V4L2_STD_PAL_B | V4L2_STD_PAL_G | V4L2_STD_PAL_H | \
+		V4L2_STD_PAL_I | V4L2_STD_PAL_N));
+if (0 == rc)
+	JOT(8, "adjust_standard(.,PAL_BGHIN) OK\n");
+else {
+	SAY("ERROR: adjust_standard(.,PAL_BGHIN) returned %i\n", rc);
+	return -EFAULT;
+}
+rc = adjust_format(peasycap, 640, 480, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE, \
+									false);
+if (0 <= rc)
+	JOT(8, "adjust_format(.,640,480,uyvy,false) OK\n");
+else {
+	SAY("ERROR: adjust_format(.,640,480,uyvy,false) returned %i\n", rc);
+	return -EFAULT;
+}
+
+#endif /* !PREFER_NTSC*/
+/*---------------------------------------------------------------------------*/
+rc = adjust_brightness(peasycap, -8192);
+if (0 != rc) {
+	SAY("ERROR: adjust_brightness(default) returned %i\n", rc);
+	return -EFAULT;
+}
+rc = adjust_contrast(peasycap, -8192);
+if (0 != rc) {
+	SAY("ERROR: adjust_contrast(default) returned %i\n", rc);
+	return -EFAULT;
+}
+rc = adjust_saturation(peasycap, -8192);
+if (0 != rc) {
+	SAY("ERROR: adjust_saturation(default) returned %i\n", rc);
+	return -EFAULT;
+}
+rc = adjust_hue(peasycap, -8192);
+if (0 != rc) {
+	SAY("ERROR: adjust_hue(default) returned %i\n", rc);
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+rc = usb_set_interface(peasycap->pusb_device, peasycap->video_interface, \
+						peasycap->video_altsetting_on);
+if (0 == rc)
+	JOT(8, "usb_set_interface(.,%i,%i) OK\n", peasycap->video_interface, \
+						peasycap->video_altsetting_on);
+else {
+	SAY("ERROR: usb_set_interface() returned %i\n", rc);
+	return -EFAULT;
+}
+rc = start_100(p);
+if (0 == rc)
+	JOT(8, "start_100() OK\n");
+else {
+	SAY("ERROR: start_100() returned %i\n", rc);
+	return -EFAULT;
+}
+peasycap->video_isoc_sequence = VIDEO_ISOC_BUFFER_MANY - 1;
+peasycap->video_idle = 0;
+peasycap->video_junk = 0;
+for (i = 0; i < 180; i++)
+	peasycap->merit[i] = 0;
+peasycap->video_eof = 0;
+peasycap->audio_eof = 0;
+
+do_gettimeofday(&peasycap->timeval7);
+
+peasycap->fudge = 0;
+
+JOT(4, "finished initialization\n");
+return 0;
+}
+/*****************************************************************************/
+int
+submit_video_urbs(struct easycap *peasycap)
+{
+struct data_urb *pdata_urb;
+struct urb *purb;
+struct list_head *plist_head;
+int j, isbad, m, rc;
+int isbuf;
+
+if ((struct list_head *)NULL == peasycap->purb_video_head) {
+	SAY("ERROR: peasycap->urb_video_head uninitialized\n");
+	return -EFAULT;
+}
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+if (!peasycap->video_isoc_streaming) {
+
+
+
+
+
+
+
+
+	JOT(4, "submission of all video urbs\n");
+	if (0 != ready_saa(peasycap->pusb_device)) {
+		SAY("ERROR: not ready to capture after waiting " \
+							"one second\n");
+		SAY(".....  continuing anyway\n");
+	}
+	isbad = 0;  m = 0;
+	list_for_each(plist_head, (peasycap->purb_video_head)) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if (NULL != pdata_urb) {
+			purb = pdata_urb->purb;
+			if (NULL != purb) {
+				isbuf = pdata_urb->isbuf;
+				purb->interval = 1;
+				purb->dev = peasycap->pusb_device;
+				purb->pipe = \
+					usb_rcvisocpipe(peasycap->pusb_device,\
+					peasycap->video_endpointnumber);
+				purb->transfer_flags = URB_ISO_ASAP;
+				purb->transfer_buffer = \
+					peasycap->video_isoc_buffer[isbuf].pgo;
+				purb->transfer_buffer_length = \
+					peasycap->video_isoc_buffer_size;
+				purb->complete = easycap_complete;
+				purb->context = peasycap;
+				purb->start_frame = 0;
+				purb->number_of_packets = \
+					peasycap->video_isoc_framesperdesc;
+
+				for (j = 0;  j < peasycap->\
+					video_isoc_framesperdesc; j++) {
+						purb->iso_frame_desc[j].\
+						offset = j * \
+						peasycap->\
+						video_isoc_maxframesize;
+						purb->iso_frame_desc[j].\
+						length = peasycap->\
+						video_isoc_maxframesize;
+					}
+
+				rc = usb_submit_urb(purb, GFP_KERNEL);
+				if (0 != rc) {
+					isbad++;
+					SAY("ERROR: usb_submit_urb() failed " \
+							"for urb with rc:\n");
+					switch (rc) {
+					case -ENOMEM: {
+						SAY("ENOMEM\n");
+						break;
+					}
+					case -ENODEV: {
+						SAY("ENODEV\n");
+						break;
+					}
+					case -ENXIO: {
+						SAY("ENXIO\n");
+						break;
+					}
+					case -EINVAL: {
+						SAY("EINVAL\n");
+						break;
+					}
+					case -EAGAIN: {
+						SAY("EAGAIN\n");
+						break;
+					}
+					case -EFBIG: {
+						SAY("EFBIG\n");
+						break;
+					}
+					case -EPIPE: {
+						SAY("EPIPE\n");
+						break;
+					}
+					case -EMSGSIZE: {
+						SAY("EMSGSIZE\n");
+						break;
+					}
+					default: {
+						SAY("unknown error code %i\n",\
+									 rc);
+						break;
+					}
+					}
+				} else {
+					m++;
+				}
+				} else {
+					isbad++;
+				}
+			} else {
+				 isbad++;
+			}
+		}
+	if (isbad) {
+		JOT(4, "attempting cleanup instead of submitting\n");
+		list_for_each(plist_head, (peasycap->purb_video_head)) {
+			pdata_urb = list_entry(plist_head, struct data_urb, \
+								list_head);
+			if (NULL != pdata_urb) {
+				purb = pdata_urb->purb;
+				if (NULL != purb)
+					usb_kill_urb(purb);
+			}
+		}
+		peasycap->video_isoc_streaming = 0;
+	} else {
+		peasycap->video_isoc_streaming = 1;
+		JOT(4, "submitted %i video urbs\n", m);
+	}
+
+
+
+
+
+
+} else {
+	JOT(4, "already streaming video urbs\n");
+}
+return 0;
+}
+/*****************************************************************************/
+int
+kill_video_urbs(struct easycap *peasycap)
+{
+int m;
+struct list_head *plist_head;
+struct data_urb *pdata_urb;
+
+if ((struct easycap *)NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL\n");
+	return -EFAULT;
+}
+if (peasycap->video_isoc_streaming) {
+
+
+
+	if ((struct list_head *)NULL != peasycap->purb_video_head) {
+		peasycap->video_isoc_streaming = 0;
+		JOT(4, "killing video urbs\n");
+		m = 0;
+		list_for_each(plist_head, (peasycap->purb_video_head)) {
+			pdata_urb = list_entry(plist_head, struct data_urb, \
+								list_head);
+			if ((struct data_urb *)NULL != pdata_urb) {
+				if ((struct urb *)NULL != pdata_urb->purb) {
+					usb_kill_urb(pdata_urb->purb);
+					m++;
+				}
+			}
+		}
+		JOT(4, "%i video urbs killed\n", m);
+	} else {
+		SAY("ERROR: peasycap->purb_video_head is NULL\n");
+		return -EFAULT;
+	}
+} else {
+	JOT(8, "%i=video_isoc_streaming, no video urbs killed\n", \
+					peasycap->video_isoc_streaming);
+}
+return 0;
+}
+/****************************************************************************/
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+int
+easycap_release_noinode(struct file *file)
+{
+return easycap_release((struct inode *)NULL, file);
+}
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+/*--------------------------------------------------------------------------*/
+int
+easycap_release(struct inode *inode, struct file *file)
+{
+#if (!defined(EASYCAP_IS_VIDEODEV_CLIENT))
+struct easycap *peasycap;
+
+JOT(4, "\n");
+
+peasycap = file->private_data;
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL.\n");
+	SAY("ending unsuccessfully\n");
+	return -EFAULT;
+}
+if (0 != kill_video_urbs(peasycap)) {
+	SAY("ERROR: kill_video_urbs() failed\n");
+	return -EFAULT;
+}
+JOT(4, "ending successfully\n");
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#else
+#
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+
+return 0;
+}
+/****************************************************************************/
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#if defined(EASYCAP_IS_VIDEODEV_CLIENT)
+int
+videodev_release(struct video_device *pvd)
+{
+struct easycap *peasycap;
+int i, j, k;
+
+JOT(4, "\n");
+
+k = 0;
+for (i = 0;  i < video_device_many;  i++) {
+	pvideo_device = pvideo_array[i];
+	if ((struct video_device *)NULL != pvideo_device) {
+		if (pvd->minor == pvideo_device->minor) {
+			peasycap = (struct easycap *)\
+					video_get_drvdata(pvideo_device);
+			if ((struct easycap *)NULL == peasycap) {
+				SAY("ERROR:  peasycap is NULL\n");
+				SAY("ending unsuccessfully\n");
+				return -EFAULT;
+			}
+			if (0 != kill_video_urbs(peasycap)) {
+				SAY("ERROR: kill_video_urbs() failed\n");
+				return -EFAULT;
+			}
+			JOT(4, "freeing video_device structure: " \
+							"/dev/video%i\n", i);
+			kfree((void *)pvideo_device);
+			for (j = i;  j < (VIDEO_DEVICE_MANY - 1);  j++)
+				pvideo_array[j] = pvideo_array[j + 1];
+			video_device_many--;  k++;
+			break;
+		}
+	}
+}
+if (!k) {
+	SAY("ERROR: lost video_device structure for %i=minor\n", pvd->minor);
+	SAY("cannot free: may cause memory leak\n");
+	SAY("ending unsuccessfully\n");
+	return -EFAULT;
+}
+
+JOT(4, "ending successfully\n");
+return 0;
+}
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+/****************************************************************************/
+/*--------------------------------------------------------------------------*/
+/*
+ *  THIS FUNCTION IS CALLED FROM WITHIN easycap_usb_disconnect().
+ *  BY THIS STAGE THE DEVICE HAS ALREADY BEEN PHYSICALLY UNPLUGGED.
+ *  peasycap->pusb_device IS NO LONGER VALID AND SHOULD HAVE BEEN SET TO NULL.
+ */
+/*---------------------------------------------------------------------------*/
+void
+easycap_delete(struct kref *pkref)
+{
+int k, m, lost;
+int allocation_video_urb, allocation_video_page, allocation_video_struct;
+int allocation_audio_urb, allocation_audio_page, allocation_audio_struct;
+int registered_video, registered_audio;
+struct easycap *peasycap;
+struct data_urb *pdata_urb;
+struct list_head *plist_head, *plist_next;
+
+JOT(4, "\n");
+
+peasycap = container_of(pkref, struct easycap, kref);
+if ((struct easycap *)NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL: cannot perform deletions\n");
+	return;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  FREE VIDEO.
+ */
+/*---------------------------------------------------------------------------*/
+if ((struct list_head *)NULL != peasycap->purb_video_head) {
+	JOT(4, "freeing video urbs\n");
+	m = 0;
+	list_for_each(plist_head, (peasycap->purb_video_head)) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if (NULL == pdata_urb)
+			JOT(4, "ERROR: pdata_urb is NULL\n");
+		else {
+			if ((struct urb *)NULL != pdata_urb->purb) {
+				usb_free_urb(pdata_urb->purb);
+				pdata_urb->purb = (struct urb *)NULL;
+				peasycap->allocation_video_urb -= 1;
+				m++;
+			}
+		}
+	}
+
+	JOT(4, "%i video urbs freed\n", m);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "freeing video data_urb structures.\n");
+	m = 0;
+	list_for_each_safe(plist_head, plist_next, peasycap->purb_video_head) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if ((struct data_urb *)NULL != pdata_urb) {
+			kfree(pdata_urb);  pdata_urb = (struct data_urb *)NULL;
+			peasycap->allocation_video_struct -= \
+						sizeof(struct data_urb);
+			m++;
+		}
+	}
+	JOT(4, "%i video data_urb structures freed\n", m);
+	JOT(4, "setting peasycap->purb_video_head=NULL\n");
+	peasycap->purb_video_head = (struct list_head *)NULL;
+	} else {
+JOT(4, "peasycap->purb_video_head is NULL\n");
+}
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing video isoc buffers.\n");
+m = 0;
+for (k = 0;  k < VIDEO_ISOC_BUFFER_MANY;  k++) {
+	if ((void *)NULL != peasycap->video_isoc_buffer[k].pgo) {
+		free_pages((unsigned long)\
+				(peasycap->video_isoc_buffer[k].pgo), \
+				VIDEO_ISOC_ORDER);
+		peasycap->video_isoc_buffer[k].pgo = (void *)NULL;
+		peasycap->allocation_video_page -= \
+				((unsigned int)(0x01 << VIDEO_ISOC_ORDER));
+		m++;
+	}
+}
+JOT(4, "isoc video buffers freed: %i pages\n", m * (0x01 << VIDEO_ISOC_ORDER));
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing video field buffers.\n");
+lost = 0;
+for (k = 0;  k < FIELD_BUFFER_MANY;  k++) {
+	for (m = 0;  m < FIELD_BUFFER_SIZE/PAGE_SIZE;  m++) {
+		if ((void *)NULL != peasycap->field_buffer[k][m].pgo) {
+			free_page((unsigned long)\
+					(peasycap->field_buffer[k][m].pgo));
+			peasycap->field_buffer[k][m].pgo = (void *)NULL;
+			peasycap->allocation_video_page -= 1;
+			lost++;
+		}
+	}
+}
+JOT(4, "video field buffers freed: %i pages\n", lost);
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing video frame buffers.\n");
+lost = 0;
+for (k = 0;  k < FRAME_BUFFER_MANY;  k++) {
+	for (m = 0;  m < FRAME_BUFFER_SIZE/PAGE_SIZE;  m++) {
+		if ((void *)NULL != peasycap->frame_buffer[k][m].pgo) {
+			free_page((unsigned long)\
+					(peasycap->frame_buffer[k][m].pgo));
+			peasycap->frame_buffer[k][m].pgo = (void *)NULL;
+			peasycap->allocation_video_page -= 1;
+			lost++;
+		}
+	}
+}
+JOT(4, "video frame buffers freed: %i pages\n", lost);
+/*---------------------------------------------------------------------------*/
+/*
+ *  FREE AUDIO.
+ */
+/*---------------------------------------------------------------------------*/
+if ((struct list_head *)NULL != peasycap->purb_audio_head) {
+	JOT(4, "freeing audio urbs\n");
+	m = 0;
+	list_for_each(plist_head, (peasycap->purb_audio_head)) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if (NULL == pdata_urb)
+			JOT(4, "ERROR: pdata_urb is NULL\n");
+		else {
+			if ((struct urb *)NULL != pdata_urb->purb) {
+				usb_free_urb(pdata_urb->purb);
+				pdata_urb->purb = (struct urb *)NULL;
+				peasycap->allocation_audio_urb -= 1;
+				m++;
+			}
+		}
+	}
+	JOT(4, "%i audio urbs freed\n", m);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "freeing audio data_urb structures.\n");
+	m = 0;
+	list_for_each_safe(plist_head, plist_next, peasycap->purb_audio_head) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if ((struct data_urb *)NULL != pdata_urb) {
+			kfree(pdata_urb);  pdata_urb = (struct data_urb *)NULL;
+			peasycap->allocation_audio_struct -= \
+						sizeof(struct data_urb);
+			m++;
+		}
+	}
+JOT(4, "%i audio data_urb structures freed\n", m);
+JOT(4, "setting peasycap->purb_audio_head=NULL\n");
+peasycap->purb_audio_head = (struct list_head *)NULL;
+} else {
+JOT(4, "peasycap->purb_audio_head is NULL\n");
+}
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing audio isoc buffers.\n");
+m = 0;
+for (k = 0;  k < AUDIO_ISOC_BUFFER_MANY;  k++) {
+	if ((void *)NULL != peasycap->audio_isoc_buffer[k].pgo) {
+		free_pages((unsigned long)\
+				(peasycap->audio_isoc_buffer[k].pgo), \
+				AUDIO_ISOC_ORDER);
+		peasycap->audio_isoc_buffer[k].pgo = (void *)NULL;
+		peasycap->allocation_audio_page -= \
+				((unsigned int)(0x01 << AUDIO_ISOC_ORDER));
+		m++;
+	}
+}
+JOT(4, "easysnd_delete(): isoc audio buffers freed: %i pages\n", \
+					m * (0x01 << AUDIO_ISOC_ORDER));
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing audio buffers.\n");
+lost = 0;
+for (k = 0;  k < peasycap->audio_buffer_page_many;  k++) {
+	if ((void *)NULL != peasycap->audio_buffer[k].pgo) {
+		free_page((unsigned long)(peasycap->audio_buffer[k].pgo));
+		peasycap->audio_buffer[k].pgo = (void *)NULL;
+		peasycap->allocation_audio_page -= 1;
+		lost++;
+	}
+}
+JOT(4, "easysnd_delete(): audio buffers freed: %i pages\n", lost);
+/*---------------------------------------------------------------------------*/
+JOT(4, "freeing easycap structure.\n");
+allocation_video_urb    = peasycap->allocation_video_urb;
+allocation_video_page   = peasycap->allocation_video_page;
+allocation_video_struct = peasycap->allocation_video_struct;
+registered_video        = peasycap->registered_video;
+allocation_audio_urb    = peasycap->allocation_audio_urb;
+allocation_audio_page   = peasycap->allocation_audio_page;
+allocation_audio_struct = peasycap->allocation_audio_struct;
+registered_audio        = peasycap->registered_audio;
+m = 0;
+if ((struct easycap *)NULL != peasycap) {
+	kfree(peasycap);  peasycap = (struct easycap *)NULL;
+	allocation_video_struct -= sizeof(struct easycap);
+	m++;
+}
+JOT(4, "%i easycap structure freed\n", m);
+/*---------------------------------------------------------------------------*/
+
+SAY("%8i= video urbs     after all deletions\n", allocation_video_urb);
+SAY("%8i= video pages    after all deletions\n", allocation_video_page);
+SAY("%8i= video structs  after all deletions\n", allocation_video_struct);
+SAY("%8i= video devices  after all deletions\n", registered_video);
+SAY("%8i= audio urbs     after all deletions\n", allocation_audio_urb);
+SAY("%8i= audio pages    after all deletions\n", allocation_audio_page);
+SAY("%8i= audio structs  after all deletions\n", allocation_audio_struct);
+SAY("%8i= audio devices  after all deletions\n", registered_audio);
+
+JOT(4, "ending.\n");
+return;
+}
+/*****************************************************************************/
+unsigned int easycap_poll(struct file *file, poll_table *wait)
+{
+struct easycap *peasycap;
+
+JOT(8, "\n");
+
+if (NULL == ((poll_table *)wait))
+	JOT(8, "WARNING:  poll table pointer is NULL ... continuing\n");
+if (NULL == ((struct file *)file)) {
+	SAY("ERROR:  file pointer is NULL\n");
+	return -EFAULT;
+}
+peasycap = file->private_data;
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL\n");
+	return -EFAULT;
+}
+peasycap->polled = 1;
+
+if (0 == easycap_dqbuf(peasycap, 0))
+	return POLLIN | POLLRDNORM;
+else
+	return POLLERR;
+
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  IF mode IS NONZERO THIS ROUTINE RETURNS -EAGAIN RATHER THAN BLOCKING.
+ */
+/*---------------------------------------------------------------------------*/
+int
+easycap_dqbuf(struct easycap *peasycap, int mode)
+{
+int miss, rc;
+
+JOT(8, "\n");
+
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  WAIT FOR FIELD 0
+ */
+/*---------------------------------------------------------------------------*/
+miss = 0;
+if (mutex_lock_interruptible(&(peasycap->mutex_mmap_video[0])))
+	return -ERESTARTSYS;
+while ((peasycap->field_read == peasycap->field_fill) || \
+				(0 != (0xFF00 & peasycap->field_buffer\
+					[peasycap->field_read][0].kount)) || \
+				(0 != (0x00FF & peasycap->field_buffer\
+					[peasycap->field_read][0].kount))) {
+	mutex_unlock(&(peasycap->mutex_mmap_video[0]));
+
+	if (mode)
+		return -EAGAIN;
+
+	JOT(8, "first wait  on wq_video, " \
+				"%i=field_read  %i=field_fill\n", \
+				peasycap->field_read, peasycap->field_fill);
+
+	msleep(1);
+	if (0 != (wait_event_interruptible(peasycap->wq_video, \
+			(peasycap->video_idle || peasycap->video_eof  || \
+			((peasycap->field_read != peasycap->field_fill) && \
+				(0 == (0xFF00 & peasycap->field_buffer\
+					[peasycap->field_read][0].kount)) && \
+				(0 == (0x00FF & peasycap->field_buffer\
+					[peasycap->field_read][0].kount))))))){
+		SAY("aborted by signal\n");
+		return -EIO;
+		}
+	if (peasycap->video_idle) {
+		JOT(8, "%i=peasycap->video_idle\n", peasycap->video_idle);
+		return -EIO;
+	}
+	if (peasycap->video_eof) {
+		JOT(8, "%i=peasycap->video_eof\n", peasycap->video_eof);
+		debrief(peasycap);
+		kill_video_urbs(peasycap);
+		return -EIO;
+	}
+miss++;
+if (mutex_lock_interruptible(&(peasycap->mutex_mmap_video[0])))
+	return -ERESTARTSYS;
+}
+mutex_unlock(&(peasycap->mutex_mmap_video[0]));
+JOT(8, "first awakening on wq_video after %i waits\n", miss);
+
+rc = field2frame(peasycap);
+if (0 != rc)
+	SAY("ERROR: field2frame() returned %i\n", rc);
+
+if (true == peasycap->offerfields) {
+	peasycap->frame_read = peasycap->frame_fill;
+	(peasycap->frame_fill)++;
+	if (peasycap->frame_buffer_many <= peasycap->frame_fill)
+		peasycap->frame_fill = 0;
+
+	if (0x01 & easycap_standard[peasycap->standard_offset].mask) {
+		peasycap->frame_buffer[peasycap->frame_read][0].kount = \
+							V4L2_FIELD_BOTTOM;
+	} else {
+		peasycap->frame_buffer[peasycap->frame_read][0].kount = \
+							V4L2_FIELD_TOP;
+	}
+JOT(8, "setting:    %i=peasycap->frame_read\n", peasycap->frame_read);
+JOT(8, "bumped to:  %i=peasycap->frame_fill\n", peasycap->frame_fill);
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  WAIT FOR FIELD 1
+ */
+/*---------------------------------------------------------------------------*/
+miss = 0;
+if (mutex_lock_interruptible(&(peasycap->mutex_mmap_video[0])))
+	return -ERESTARTSYS;
+while ((peasycap->field_read == peasycap->field_fill) || \
+				(0 != (0xFF00 & peasycap->field_buffer\
+					[peasycap->field_read][0].kount)) || \
+				(0 == (0x00FF & peasycap->field_buffer\
+					[peasycap->field_read][0].kount))) {
+	mutex_unlock(&(peasycap->mutex_mmap_video[0]));
+
+	if (mode)
+		return -EAGAIN;
+
+	JOT(8, "second wait on wq_video, " \
+				"%i=field_read  %i=field_fill\n", \
+				peasycap->field_read, peasycap->field_fill);
+	msleep(1);
+	if (0 != (wait_event_interruptible(peasycap->wq_video, \
+			(peasycap->video_idle || peasycap->video_eof  || \
+			((peasycap->field_read != peasycap->field_fill) && \
+				(0 == (0xFF00 & peasycap->field_buffer\
+					[peasycap->field_read][0].kount)) && \
+				(0 != (0x00FF & peasycap->field_buffer\
+					[peasycap->field_read][0].kount))))))){
+		SAY("aborted by signal\n");
+		return -EIO;
+	}
+	if (peasycap->video_idle) {
+		JOT(8, "%i=peasycap->video_idle\n", peasycap->video_idle);
+		return -EIO;
+	}
+	if (peasycap->video_eof) {
+		JOT(8, "%i=peasycap->video_eof\n", peasycap->video_eof);
+		debrief(peasycap);
+		kill_video_urbs(peasycap);
+		return -EIO;
+	}
+miss++;
+if (mutex_lock_interruptible(&(peasycap->mutex_mmap_video[0])))
+	return -ERESTARTSYS;
+}
+mutex_unlock(&(peasycap->mutex_mmap_video[0]));
+JOT(8, "second awakening on wq_video after %i waits\n", miss);
+
+rc = field2frame(peasycap);
+if (0 != rc)
+	SAY("ERROR: field2frame() returned %i\n", rc);
+
+peasycap->frame_read = peasycap->frame_fill;
+peasycap->queued[peasycap->frame_read] = 0;
+peasycap->done[peasycap->frame_read]   = V4L2_BUF_FLAG_DONE;
+
+(peasycap->frame_fill)++;
+if (peasycap->frame_buffer_many <= peasycap->frame_fill)
+	peasycap->frame_fill = 0;
+
+if (0x01 & easycap_standard[peasycap->standard_offset].mask) {
+	peasycap->frame_buffer[peasycap->frame_read][0].kount = \
+							V4L2_FIELD_TOP;
+} else {
+	peasycap->frame_buffer[peasycap->frame_read][0].kount = \
+							V4L2_FIELD_BOTTOM;
+}
+
+JOT(8, "setting:    %i=peasycap->frame_read\n", peasycap->frame_read);
+JOT(8, "bumped to:  %i=peasycap->frame_fill\n", peasycap->frame_fill);
+
+return 0;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  BY DEFINITION, odd IS true  FOR THE FIELD OCCUPYING LINES 1,3,5,...,479
+ *                 odd IS false FOR THE FIELD OCCUPYING LINES 0,2,4,...,478
+ *
+ *  WHEN BOOLEAN PARAMETER decimatepixel IS true, ONLY THE FIELD FOR WHICH
+ *  odd==false IS TRANSFERRED TO THE FRAME BUFFER.
+ *
+ *  THE BOOLEAN PARAMETER offerfields IS true ONLY WHEN THE USER PROGRAM
+ *  CHOOSES THE OPTION V4L2_FIELD_ALTERNATE.  NO USERSPACE PROGRAM TESTED
+ *  TO DATE HAS DONE THIS.  BUGS ARE LIKELY.
+ */
+/*---------------------------------------------------------------------------*/
+int
+field2frame(struct easycap *peasycap)
+{
+static struct timeval timeval0;
+struct timeval timeval;
+long long int above, below;
+__u32 remainder;
+struct signed_div_result sdr;
+
+void *pex, *pad;
+int kex, kad, mex, mad, rex, rad, rad2;
+int c2, c3, w2, w3, cz, wz;
+int rc, bytesperpixel, multiplier, much, more, over, rump, caches;
+__u8 mask, margin;
+bool odd, isuy, decimatepixel, offerfields;
+
+JOT(8, "=====  parity %i, field buffer %i --> frame buffer %i\n", \
+			peasycap->field_buffer[peasycap->field_read][0].kount,\
+			peasycap->field_read, peasycap->frame_fill);
+JOT(8, "=====  %i=bytesperpixel\n", peasycap->bytesperpixel);
+if (true == peasycap->offerfields)
+	JOT(8, "===== offerfields\n");
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  REJECT OR CLEAN BAD FIELDS
+ */
+/*---------------------------------------------------------------------------*/
+if (peasycap->field_read == peasycap->field_fill) {
+	SAY("ERROR: on entry, still filling field buffer %i\n", \
+							peasycap->field_read);
+	return 0;
+}
+#if defined(EASYCAP_TESTCARD)
+easycap_testcard(peasycap, peasycap->field_read);
+#else
+if (0 != (0x0400 & peasycap->field_buffer[peasycap->field_read][0].kount))
+	easycap_testcard(peasycap, peasycap->field_read);
+#endif /*EASYCAP_TESTCARD*/
+/*---------------------------------------------------------------------------*/
+
+offerfields = peasycap->offerfields;
+bytesperpixel = peasycap->bytesperpixel;
+decimatepixel = peasycap->decimatepixel;
+
+if ((2 != bytesperpixel) && \
+			(3 != bytesperpixel) && \
+			(4 != bytesperpixel)) {
+	SAY("MISTAKE: %i=bytesperpixel\n", bytesperpixel);
+	return -EFAULT;
+}
+if (true == decimatepixel)
+	multiplier = 2;
+else
+	multiplier = 1;
+
+w2 = 2 * multiplier * (peasycap->width);
+w3 = bytesperpixel * \
+		multiplier * \
+		(peasycap->width);
+wz = multiplier * \
+		(peasycap->height) * \
+		multiplier * \
+		(peasycap->width);
+
+kex = peasycap->field_read;  mex = 0;
+kad = peasycap->frame_fill;  mad = 0;
+
+pex = peasycap->field_buffer[kex][0].pgo;  rex = PAGE_SIZE;
+pad = peasycap->frame_buffer[kad][0].pgo;  rad = PAGE_SIZE;
+if (peasycap->field_buffer[kex][0].kount)
+	odd = true;
+else
+	odd = false;
+
+if ((true == odd) && (false == offerfields) &&(false == decimatepixel)) {
+	JOT(8, "  initial skipping    %4i          bytes p.%4i\n", \
+							w3/multiplier, mad);
+	pad += (w3 / multiplier);  rad -= (w3 / multiplier);
+}
+isuy = true;
+mask = 0;  rump = 0;  caches = 0;
+
+cz = 0;
+while (cz < wz) {
+	/*-------------------------------------------------------------------*/
+	/*
+	**  PROCESS ONE LINE OF FRAME AT FULL RESOLUTION:
+	**  READ   w2   BYTES FROM FIELD BUFFER,
+	**  WRITE  w3   BYTES TO FRAME BUFFER
+	**/
+	/*-------------------------------------------------------------------*/
+	if (false == decimatepixel) {
+		over = w2;
+		do {
+			much = over;  more = 0;  margin = 0;  mask = 0x00;
+			if (rex < much)
+				much = rex;
+			rump = 0;
+
+			if (much % 2) {
+				SAY("MISTAKE: much is odd\n");
+				return -EFAULT;
+			}
+
+			more = (bytesperpixel * \
+					much) / 2;
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+			if (1 < bytesperpixel) {
+				if ((rad * \
+					2) < (much * \
+						bytesperpixel)) {
+					/*
+					**   INJUDICIOUS ALTERATION OF THIS
+					**   BLOCK WILL CAUSE BREAKAGE.
+					**   BEWARE.
+					**/
+					rad2 = rad + bytesperpixel - 1;
+					much = ((((2 * \
+						rad2)/bytesperpixel)/2) * 2);
+					rump = ((bytesperpixel * \
+							much) / 2) - rad;
+					more = rad;
+					}
+				mask = (__u8)rump;
+				margin = 0;
+				if (much == rex) {
+					mask |= 0x04;
+					if ((mex + 1) < FIELD_BUFFER_SIZE/ \
+								PAGE_SIZE) {
+						margin = *((__u8 *)(peasycap->\
+							field_buffer\
+							[kex][mex + 1].pgo));
+					} else
+						mask |= 0x08;
+				}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+			} else {
+				SAY("MISTAKE: %i=bytesperpixel\n", \
+						bytesperpixel);
+				return -EFAULT;
+			}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+			if (rump)
+				caches++;
+
+			rc = redaub(peasycap, pad, pex, much, more, \
+							mask, margin, isuy);
+			if (0 > rc) {
+				SAY("ERROR: redaub() failed\n");
+				return -EFAULT;
+			}
+			if (much % 4) {
+				if (isuy)
+					isuy = false;
+				else
+					isuy = true;
+			}
+			over -= much;   cz += much;
+			pex  += much;  rex -= much;
+			if (!rex) {
+				mex++;
+				pex = peasycap->field_buffer[kex][mex].pgo;
+				rex = PAGE_SIZE;
+			}
+			pad  += more;
+			rad -= more;
+			if (!rad) {
+				mad++;
+				pad = peasycap->frame_buffer[kad][mad].pgo;
+				rad = PAGE_SIZE;
+				if (rump) {
+					pad += rump;
+					rad -= rump;
+				}
+			}
+		} while (over);
+/*---------------------------------------------------------------------------*/
+/*
+ *  SKIP  w3 BYTES IN TARGET FRAME BUFFER,
+ *  UNLESS IT IS THE LAST LINE OF AN ODD FRAME
+ */
+/*---------------------------------------------------------------------------*/
+		if (((false == odd) || (cz != wz))&&(false == offerfields)) {
+			over = w3;
+			do {
+				if (!rad) {
+					mad++;
+					pad = peasycap->frame_buffer\
+						[kad][mad].pgo;
+					rad = PAGE_SIZE;
+				}
+				more = over;
+				if (rad < more)
+					more = rad;
+				over -= more;
+				pad  += more;
+				rad  -= more;
+			} while (over);
+		}
+/*---------------------------------------------------------------------------*/
+/*
+ *  PROCESS ONE LINE OF FRAME AT REDUCED RESOLUTION:
+ *  ONLY IF false==odd,
+ *  READ   w2   BYTES FROM FIELD BUFFER,
+ *  WRITE  w3 / 2  BYTES TO FRAME BUFFER
+ */
+/*---------------------------------------------------------------------------*/
+	} else if (false == odd) {
+		over = w2;
+		do {
+			much = over;  more = 0;  margin = 0;  mask = 0x00;
+			if (rex < much)
+				much = rex;
+			rump = 0;
+
+			if (much % 2) {
+				SAY("MISTAKE: much is odd\n");
+				return -EFAULT;
+			}
+
+			more = (bytesperpixel * \
+					much) / 4;
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+			if (1 < bytesperpixel) {
+				if ((rad * 4) < (much * \
+						bytesperpixel)) {
+					/*
+					**   INJUDICIOUS ALTERATION OF THIS
+					**   BLOCK WILL CAUSE BREAKAGE.
+					**   BEWARE.
+					**/
+					rad2 = rad + bytesperpixel - 1;
+					much = ((((2 * rad2)/bytesperpixel)/2)\
+									* 4);
+					rump = ((bytesperpixel * \
+							much) / 4) - rad;
+					more = rad;
+					}
+				mask = (__u8)rump;
+				margin = 0;
+				if (much == rex) {
+					mask |= 0x04;
+					if ((mex + 1) < FIELD_BUFFER_SIZE/ \
+								PAGE_SIZE) {
+						margin = *((__u8 *)(peasycap->\
+							field_buffer\
+							[kex][mex + 1].pgo));
+						}
+					else
+						mask |= 0x08;
+					}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+				} else {
+					SAY("MISTAKE: %i=bytesperpixel\n", \
+						bytesperpixel);
+					return -EFAULT;
+				}
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+			if (rump)
+				caches++;
+
+			rc = redaub(peasycap, pad, pex, much, more, \
+							mask, margin, isuy);
+			if (0 > rc) {
+				SAY("ERROR: redaub() failed\n");
+				return -EFAULT;
+			}
+			over -= much;   cz += much;
+			pex  += much;  rex -= much;
+			if (!rex) {
+				mex++;
+				pex = peasycap->field_buffer[kex][mex].pgo;
+				rex = PAGE_SIZE;
+			}
+			pad  += more;
+			rad -= more;
+			if (!rad) {
+				mad++;
+				pad = peasycap->frame_buffer[kad][mad].pgo;
+				rad = PAGE_SIZE;
+				if (rump) {
+					pad += rump;
+					rad -= rump;
+				}
+			}
+		} while (over);
+/*---------------------------------------------------------------------------*/
+/*
+ *  OTHERWISE JUST
+ *  READ   w2   BYTES FROM FIELD BUFFER AND DISCARD THEM
+ */
+/*---------------------------------------------------------------------------*/
+	} else {
+		over = w2;
+		do {
+			if (!rex) {
+				mex++;
+				pex = peasycap->field_buffer[kex][mex].pgo;
+				rex = PAGE_SIZE;
+			}
+			much = over;
+			if (rex < much)
+				much = rex;
+			over -= much;
+			cz += much;
+			pex  += much;
+			rex -= much;
+		} while (over);
+	}
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  SANITY CHECKS
+ */
+/*---------------------------------------------------------------------------*/
+c2 = (mex + 1)*PAGE_SIZE - rex;
+if (cz != c2)
+	SAY("ERROR: discrepancy %i in bytes read\n", c2 - cz);
+c3 = (mad + 1)*PAGE_SIZE - rad;
+
+if (false == decimatepixel) {
+	if (bytesperpixel * \
+		cz != c3) \
+		SAY("ERROR: discrepancy %i in bytes written\n", \
+						c3 - (bytesperpixel * \
+									cz));
+} else {
+	if (false == odd) {
+		if (bytesperpixel * \
+			cz != (4 * c3))
+			SAY("ERROR: discrepancy %i in bytes written\n", \
+						(2*c3)-(bytesperpixel * \
+									cz));
+		} else {
+			if (0 != c3)
+				SAY("ERROR: discrepancy %i " \
+						"in bytes written\n", c3);
+		}
+}
+if (rump)
+	SAY("ERROR: undischarged cache at end of line in frame buffer\n");
+
+JOT(8, "===== field2frame(): %i bytes --> %i bytes (incl skip)\n", c2, c3);
+JOT(8, "===== field2frame(): %i=mad  %i=rad\n", mad, rad);
+
+if (true == odd)
+	JOT(8, "+++++ field2frame():  frame buffer %i is full\n", kad);
+
+if (peasycap->field_read == peasycap->field_fill)
+	SAY("WARNING: on exit, filling field buffer %i\n", \
+							peasycap->field_read);
+/*---------------------------------------------------------------------------*/
+/*
+ *  CALCULATE VIDEO STREAMING RATE
+ */
+/*---------------------------------------------------------------------------*/
+do_gettimeofday(&timeval);
+if (timeval0.tv_sec) {
+	below = ((long long int)(1000000)) * \
+		((long long int)(timeval.tv_sec  - timeval0.tv_sec)) + \
+			 (long long int)(timeval.tv_usec - timeval0.tv_usec);
+	above = (long long int)1000000;
+
+	sdr = signed_div(above, below);
+	above = sdr.quotient;
+	remainder = (__u32)sdr.remainder;
+
+	JOT(8, "video streaming at %3lli.%03i fields per second\n", above, \
+							(remainder/1000));
+}
+timeval0 = timeval;
+
+if (caches)
+	JOT(8, "%i=caches\n", caches);
+return 0;
+}
+/*****************************************************************************/
+struct signed_div_result
+signed_div(long long int above, long long int below)
+{
+struct signed_div_result sdr;
+
+if (((0 <= above) && (0 <= below)) || ((0  > above) && (0  > below))) {
+	sdr.remainder = (unsigned long long int) do_div(above, below);
+	sdr.quotient  = (long long int) above;
+} else {
+	if (0 > above)
+		above = -above;
+	if (0 > below)
+		below = -below;
+	sdr.remainder = (unsigned long long int) do_div(above, below);
+	sdr.quotient  = -((long long int) above);
+}
+return sdr;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  DECIMATION AND COLOURSPACE CONVERSION.
+ *
+ *  THIS ROUTINE REQUIRES THAT ALL THE DATA TO BE READ RESIDES ON ONE PAGE
+ *  AND THAT ALL THE DATA TO BE WRITTEN RESIDES ON ONE (DIFFERENT) PAGE.
+ *  THE CALLING ROUTINE MUST ENSURE THAT THIS REQUIREMENT IS MET, AND MUST
+ *  ALSO ENSURE THAT much IS EVEN.
+ *
+ *  much BYTES ARE READ, AT LEAST (bytesperpixel * much)/2 BYTES ARE WRITTEN
+ *  IF THERE IS NO DECIMATION, HALF THIS AMOUNT IF THERE IS DECIMATION.
+ *
+ *  mask IS ZERO WHEN NO SPECIAL BEHAVIOUR REQUIRED. OTHERWISE IT IS SET THUS:
+ *     0x03 & mask =  number of bytes to be written to cache instead of to
+ *                    frame buffer
+ *     0x04 & mask => use argument margin to set the chrominance for last pixel
+ *     0x08 & mask => do not set the chrominance for last pixel
+ *
+ *  YUV to RGB CONVERSION IS (OR SHOULD BE) ITU-R BT 601.
+ *
+ *  THERE IS A LOT OF CODE REPETITION IN THIS ROUTINE IN ORDER TO AVOID
+ *  INEFFICIENT SWITCHING INSIDE INNER LOOPS.  REARRANGING THE LOGIC TO
+ *  REDUCE CODE LENGTH WILL GENERALLY IMPAIR RUNTIME PERFORMANCE.  BEWARE.
+ */
+/*---------------------------------------------------------------------------*/
+int
+redaub(struct easycap *peasycap, void *pad, void *pex, int much, int more, \
+					__u8 mask, __u8 margin, bool isuy)
+{
+static __s32 ay[256], bu[256], rv[256], gu[256], gv[256];
+static __u8 cache[8], *pcache;
+__u8 r, g, b, y, u, v, c, *p2, *p3, *pz, *pr;
+int  bytesperpixel;
+bool byteswaporder, decimatepixel, last;
+int j, rump;
+__s32 s32;
+
+if (much % 2) {
+	SAY("MISTAKE: much is odd\n");
+	return -EFAULT;
+}
+bytesperpixel = peasycap->bytesperpixel;
+byteswaporder = peasycap->byteswaporder;
+decimatepixel = peasycap->decimatepixel;
+
+/*---------------------------------------------------------------------------*/
+if (!bu[255]) {
+	for (j = 0; j < 112; j++) {
+		s32 = (0xFF00 & (453 * j)) >> 8;
+		bu[j + 128] =  s32; bu[127 - j] = -s32;
+		s32 = (0xFF00 & (359 * j)) >> 8;
+		rv[j + 128] =  s32; rv[127 - j] = -s32;
+		s32 = (0xFF00 & (88 * j)) >> 8;
+		gu[j + 128] =  s32; gu[127 - j] = -s32;
+		s32 = (0xFF00 & (183 * j)) >> 8;
+		gv[j + 128] =  s32; gv[127 - j] = -s32;
+	}
+	for (j = 0; j < 16; j++) {
+		bu[j] = bu[16]; rv[j] = rv[16];
+		gu[j] = gu[16]; gv[j] = gv[16];
+	}
+	for (j = 240; j < 256; j++) {
+		bu[j] = bu[239]; rv[j] = rv[239];
+		gu[j] = gu[239]; gv[j] = gv[239];
+	}
+	for (j =  16; j < 236; j++)
+		ay[j] = j;
+	for (j =   0; j <  16; j++)
+		ay[j] = ay[16];
+	for (j = 236; j < 256; j++)
+		ay[j] = ay[235];
+	JOT(8, "lookup tables are prepared\n");
+}
+if ((__u8 *)NULL == pcache)
+	pcache = &cache[0];
+/*---------------------------------------------------------------------------*/
+/*
+ *  TRANSFER CONTENTS OF CACHE TO THE FRAME BUFFER
+ */
+/*---------------------------------------------------------------------------*/
+if (!pcache) {
+	SAY("MISTAKE: pcache is NULL\n");
+	return -EFAULT;
+}
+
+if (pcache != &cache[0])
+	JOT(16, "cache has %i bytes\n", (int)(pcache - &cache[0]));
+p2 = &cache[0];
+p3 = (__u8 *)pad - (int)(pcache - &cache[0]);
+while (p2 < pcache) {
+	*p3++ = *p2;  p2++;
+}
+pcache = &cache[0];
+if (p3 != pad) {
+	SAY("MISTAKE: pointer misalignment\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+rump = (int)(0x03 & mask);
+u = 0; v = 0;
+p2 = (__u8 *)pex;  pz = p2 + much;  pr = p3 + more;  last = false;
+p2++;
+
+if (true == isuy)
+	u = *(p2 - 1);
+else
+	v = *(p2 - 1);
+
+if (rump)
+	JOT(16, "%4i=much  %4i=more  %i=rump\n", much, more, rump);
+
+/*---------------------------------------------------------------------------*/
+switch (bytesperpixel) {
+case 2: {
+	if (false == decimatepixel) {
+		memcpy(pad, pex, (size_t)much);
+		if (false == byteswaporder)
+			/*---------------------------------------------------*/
+			/*
+			**  UYVY
+			*/
+			/*---------------------------------------------------*/
+			return 0;
+		else {
+			/*---------------------------------------------------*/
+			/*
+			**  YUYV
+			*/
+			/*---------------------------------------------------*/
+			p3 = (__u8 *)pad;  pz = p3 + much;
+			while  (pz > p3) {
+				c = *p3;
+				*p3 = *(p3 + 1);
+				*(p3 + 1) = c;
+				p3 += 2;
+			}
+			return 0;
+		}
+	} else {
+		if (false == byteswaporder) {
+			/*---------------------------------------------------*/
+			/*
+			**  UYVY DECIMATED
+			*/
+			/*---------------------------------------------------*/
+			p2 = (__u8 *)pex;  p3 = (__u8 *)pad;  pz = p2 + much;
+			while (pz > p2) {
+				*p3 = *p2;
+				*(p3 + 1) = *(p2 + 1);
+				*(p3 + 2) = *(p2 + 2);
+				*(p3 + 3) = *(p2 + 3);
+				p3 += 4;  p2 += 8;
+			}
+			return 0;
+		} else {
+			/*---------------------------------------------------*/
+			/*
+			**  YUYV DECIMATED
+			**/
+			/*---------------------------------------------------*/
+			p2 = (__u8 *)pex;  p3 = (__u8 *)pad;  pz = p2 + much;
+			while (pz > p2) {
+				*p3 = *(p2 + 1);
+				*(p3 + 1) = *p2;
+				*(p3 + 2) = *(p2 + 3);
+				*(p3 + 3) = *(p2 + 2);
+				p3 += 4;  p2 += 8;
+			}
+			return 0;
+		}
+	}
+	break;
+	}
+case 3:
+	{
+	if (false == decimatepixel) {
+		if (false == byteswaporder) {
+			/*---------------------------------------------------*/
+			/*
+			**  RGB
+			**/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				s32 = ay[(int)y] + rv[(int)v];
+				r = (255 < s32) ? 255 : ((0 > s32) ? \
+							0 : (__u8)s32);
+				s32 = ay[(int)y] - gu[(int)u] - gv[(int)v];
+				g = (255 < s32) ? 255 : ((0 > s32) ? \
+							0 : (__u8)s32);
+				s32 = ay[(int)y] + bu[(int)u];
+				b = (255 < s32) ? 255 : ((0 > s32) ? \
+							0 : (__u8)s32);
+
+				if ((true == last) && rump) {
+					pcache = &cache[0];
+					switch (bytesperpixel - rump) {
+					case 1: {
+						*p3 = r;
+						*pcache++ = g;
+						*pcache++ = b;
+						break;
+					}
+					case 2: {
+						*p3 = r;
+						*(p3 + 1) = g;
+						*pcache++ = b;
+						break;
+					}
+					default: {
+						SAY("MISTAKE: %i=rump\n", \
+							bytesperpixel - rump);
+						return -EFAULT;
+					}
+					}
+				} else {
+					*p3 = r;
+					*(p3 + 1) = g;
+					*(p3 + 2) = b;
+				}
+				p2 += 2;
+				if (true == isuy)
+					isuy = false;
+				else
+					isuy = true;
+				p3 += bytesperpixel;
+			}
+			return 0;
+		} else {
+			/*---------------------------------------------------*/
+			/*
+			**  BGR
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					}
+				else
+					if (0x08 & mask)
+						;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				s32 = ay[(int)y] + rv[(int)v];
+				r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] - gu[(int)u] - gv[(int)v];
+				g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] + bu[(int)u];
+				b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+				if ((true == last) && rump) {
+					pcache = &cache[0];
+					switch (bytesperpixel - rump) {
+					case 1: {
+						*p3 = b;
+						*pcache++ = g;
+						*pcache++ = r;
+						break;
+					}
+					case 2: {
+						*p3 = b;
+						*(p3 + 1) = g;
+						*pcache++ = r;
+						break;
+					}
+					default: {
+						SAY("MISTAKE: %i=rump\n", \
+							bytesperpixel - rump);
+						return -EFAULT;
+					}
+					}
+				} else {
+					*p3 = b;
+					*(p3 + 1) = g;
+					*(p3 + 2) = r;
+					}
+				p2 += 2;
+				if (true == isuy)
+					isuy = false;
+				else
+					isuy = true;
+				p3 += bytesperpixel;
+				}
+			}
+		return 0;
+	} else {
+		if (false == byteswaporder) {
+			/*---------------------------------------------------*/
+			/*
+			**  RGB DECIMATED
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				if (true == isuy) {
+					s32 = ay[(int)y] + rv[(int)v];
+					r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] - gu[(int)u] - \
+								gv[(int)v];
+					g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] + bu[(int)u];
+					b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+					if ((true == last) && rump) {
+						pcache = &cache[0];
+						switch (bytesperpixel - rump) {
+						case 1: {
+							*p3 = r;
+							*pcache++ = g;
+							*pcache++ = b;
+							break;
+						}
+						case 2: {
+							*p3 = r;
+							*(p3 + 1) = g;
+							*pcache++ = b;
+							break;
+						}
+						default: {
+							SAY("MISTAKE: " \
+							"%i=rump\n", \
+							bytesperpixel - rump);
+							return -EFAULT;
+						}
+						}
+					} else {
+						*p3 = r;
+						*(p3 + 1) = g;
+						*(p3 + 2) = b;
+					}
+					isuy = false;
+					p3 += bytesperpixel;
+				} else {
+					isuy = true;
+				}
+				p2 += 2;
+			}
+			return 0;
+		} else {
+			/*---------------------------------------------------*/
+			/*
+			 *  BGR DECIMATED
+			 */
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				if (true == isuy) {
+
+					s32 = ay[(int)y] + rv[(int)v];
+					r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] - gu[(int)u] - \
+								gv[(int)v];
+					g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] + bu[(int)u];
+					b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+					if ((true == last) && rump) {
+						pcache = &cache[0];
+						switch (bytesperpixel - rump) {
+						case 1: {
+							*p3 = b;
+							*pcache++ = g;
+							*pcache++ = r;
+							break;
+						}
+						case 2: {
+							*p3 = b;
+							*(p3 + 1) = g;
+							*pcache++ = r;
+							break;
+						}
+						default: {
+							SAY("MISTAKE: " \
+							"%i=rump\n", \
+							bytesperpixel - rump);
+							return -EFAULT;
+						}
+						}
+					} else {
+						*p3 = b;
+						*(p3 + 1) = g;
+						*(p3 + 2) = r;
+						}
+					isuy = false;
+					p3 += bytesperpixel;
+					}
+				else
+					isuy = true;
+				p2 += 2;
+				}
+			return 0;
+			}
+		}
+	break;
+	}
+case 4:
+	{
+	if (false == decimatepixel) {
+		if (false == byteswaporder) {
+			/*---------------------------------------------------*/
+			/*
+			**  RGBA
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						 if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				s32 = ay[(int)y] + rv[(int)v];
+				r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] - gu[(int)u] - gv[(int)v];
+				g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] + bu[(int)u];
+				b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+				if ((true == last) && rump) {
+					pcache = &cache[0];
+					switch (bytesperpixel - rump) {
+					case 1: {
+						*p3 = r;
+						*pcache++ = g;
+						*pcache++ = b;
+						*pcache++ = 0;
+						break;
+					}
+					case 2: {
+						*p3 = r;
+						*(p3 + 1) = g;
+						*pcache++ = b;
+						*pcache++ = 0;
+						break;
+					}
+					case 3: {
+						*p3 = r;
+						*(p3 + 1) = g;
+						*(p3 + 2) = b;
+						*pcache++ = 0;
+						break;
+					}
+					default: {
+						SAY("MISTAKE: %i=rump\n", \
+							bytesperpixel - rump);
+						return -EFAULT;
+					}
+					}
+				} else {
+					*p3 = r;
+					*(p3 + 1) = g;
+					*(p3 + 2) = b;
+					*(p3 + 3) = 0;
+				}
+				p2 += 2;
+				if (true == isuy)
+					isuy = false;
+				else
+					isuy = true;
+				p3 += bytesperpixel;
+			}
+			return 0;
+		} else {
+			/*---------------------------------------------------*/
+			/*
+			**  BGRA
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						 if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				s32 = ay[(int)y] + rv[(int)v];
+				r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] - gu[(int)u] - gv[(int)v];
+				g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+				s32 = ay[(int)y] + bu[(int)u];
+				b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+				if ((true == last) && rump) {
+					pcache = &cache[0];
+					switch (bytesperpixel - rump) {
+					case 1: {
+						*p3 = b;
+						*pcache++ = g;
+						*pcache++ = r;
+						*pcache++ = 0;
+						break;
+					}
+					case 2: {
+						*p3 = b;
+						*(p3 + 1) = g;
+						*pcache++ = r;
+						*pcache++ = 0;
+						break;
+					}
+					case 3: {
+						*p3 = b;
+						*(p3 + 1) = g;
+						*(p3 + 2) = r;
+						*pcache++ = 0;
+						break;
+					}
+					default: {
+						SAY("MISTAKE: %i=rump\n", \
+							bytesperpixel - rump);
+						return -EFAULT;
+					}
+					}
+				} else {
+					*p3 = b;
+					*(p3 + 1) = g;
+					*(p3 + 2) = r;
+					*(p3 + 3) = 0;
+				}
+				p2 += 2;
+				if (true == isuy)
+					isuy = false;
+				else
+					isuy = true;
+				p3 += bytesperpixel;
+			}
+		}
+		return 0;
+	} else {
+		if (false == byteswaporder) {
+			/*---------------------------------------------------*/
+			/*
+			**  RGBA DECIMATED
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				if (true == isuy) {
+
+					s32 = ay[(int)y] + rv[(int)v];
+					r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] - gu[(int)u] - \
+								gv[(int)v];
+					g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] + bu[(int)u];
+					b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+					if ((true == last) && rump) {
+						pcache = &cache[0];
+						switch (bytesperpixel - rump) {
+						case 1: {
+							*p3 = r;
+							*pcache++ = g;
+							*pcache++ = b;
+							*pcache++ = 0;
+							break;
+						}
+						case 2: {
+							*p3 = r;
+							*(p3 + 1) = g;
+							*pcache++ = b;
+							*pcache++ = 0;
+							break;
+						}
+						case 3: {
+							*p3 = r;
+							*(p3 + 1) = g;
+							*(p3 + 2) = b;
+							*pcache++ = 0;
+							break;
+						}
+						default: {
+							SAY("MISTAKE: " \
+							"%i=rump\n", \
+							bytesperpixel - \
+							rump);
+							return -EFAULT;
+							}
+						}
+					} else {
+						*p3 = r;
+						*(p3 + 1) = g;
+						*(p3 + 2) = b;
+						*(p3 + 3) = 0;
+						}
+					isuy = false;
+					p3 += bytesperpixel;
+				} else
+					isuy = true;
+				p2 += 2;
+			}
+			return 0;
+		} else {
+			/*---------------------------------------------------*/
+			/*
+			**  BGRA DECIMATED
+			*/
+			/*---------------------------------------------------*/
+			while (pz > p2) {
+				if (pr <= (p3 + bytesperpixel))
+					last = true;
+				else
+					last = false;
+				y = *p2;
+				if ((true == last) && (0x0C & mask)) {
+					if (0x04 & mask) {
+						if (true == isuy)
+							v = margin;
+						else
+							u = margin;
+					} else
+						if (0x08 & mask)
+							;
+				} else {
+					if (true == isuy)
+						v = *(p2 + 1);
+					else
+						u = *(p2 + 1);
+				}
+
+				if (true == isuy) {
+					s32 = ay[(int)y] + rv[(int)v];
+					r = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] - gu[(int)u] - \
+								gv[(int)v];
+					g = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+					s32 = ay[(int)y] + bu[(int)u];
+					b = (255 < s32) ? 255 : ((0 > s32) ? \
+								0 : (__u8)s32);
+
+					if ((true == last) && rump) {
+						pcache = &cache[0];
+						switch (bytesperpixel - rump) {
+						case 1: {
+							*p3 = b;
+							*pcache++ = g;
+							*pcache++ = r;
+							*pcache++ = 0;
+							break;
+						}
+						case 2: {
+							*p3 = b;
+							*(p3 + 1) = g;
+							*pcache++ = r;
+							*pcache++ = 0;
+							break;
+						}
+						case 3: {
+							*p3 = b;
+							*(p3 + 1) = g;
+							*(p3 + 2) = r;
+							*pcache++ = 0;
+							break;
+						}
+						default: {
+							SAY("MISTAKE: " \
+							"%i=rump\n", \
+							bytesperpixel - rump);
+							return -EFAULT;
+						}
+						}
+					} else {
+						*p3 = b;
+						*(p3 + 1) = g;
+						*(p3 + 2) = r;
+						*(p3 + 3) = 0;
+					}
+					isuy = false;
+					p3 += bytesperpixel;
+				} else
+					isuy = true;
+					p2 += 2;
+				}
+				return 0;
+			}
+		}
+	break;
+	}
+default: {
+	SAY("MISTAKE: %i=bytesperpixel\n", bytesperpixel);
+	return -EFAULT;
+	}
+}
+return 0;
+}
+/*****************************************************************************/
+void
+debrief(struct easycap *peasycap)
+{
+if ((struct usb_device *)NULL != peasycap->pusb_device) {
+	check_stk(peasycap->pusb_device);
+	check_saa(peasycap->pusb_device);
+	sayreadonly(peasycap);
+	SAY("%i=peasycap->field_fill\n", peasycap->field_fill);
+	SAY("%i=peasycap->field_read\n", peasycap->field_read);
+	SAY("%i=peasycap->frame_fill\n", peasycap->frame_fill);
+	SAY("%i=peasycap->frame_read\n", peasycap->frame_read);
+}
+return;
+}
+/*****************************************************************************/
+void
+sayreadonly(struct easycap *peasycap)
+{
+static int done;
+int got00, got1F, got60, got61, got62;
+
+if ((!done) && ((struct usb_device *)NULL != peasycap->pusb_device)) {
+	done = 1;
+	got00 = read_saa(peasycap->pusb_device, 0x00);
+	got1F = read_saa(peasycap->pusb_device, 0x1F);
+	got60 = read_saa(peasycap->pusb_device, 0x60);
+	got61 = read_saa(peasycap->pusb_device, 0x61);
+	got62 = read_saa(peasycap->pusb_device, 0x62);
+	SAY("0x%02X=reg0x00  0x%02X=reg0x1F\n", got00, got1F);
+	SAY("0x%02X=reg0x60  0x%02X=reg0x61  0x%02X=reg0x62\n", \
+							got60, got61, got62);
+}
+return;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  SEE CORBET ET AL. "LINUX DEVICE DRIVERS", 3rd EDITION, PAGES 430-434
+ */
+/*---------------------------------------------------------------------------*/
+int easycap_mmap(struct file *file, struct vm_area_struct *pvma)
+{
+
+JOT(8, "\n");
+
+pvma->vm_ops = &easycap_vm_ops;
+pvma->vm_flags |= VM_RESERVED;
+if (NULL != file)
+	pvma->vm_private_data = file->private_data;
+easycap_vma_open(pvma);
+return 0;
+}
+/*****************************************************************************/
+void
+easycap_vma_open(struct vm_area_struct *pvma)
+{
+struct easycap *peasycap;
+
+peasycap = pvma->vm_private_data;
+if (NULL != peasycap)
+	peasycap->vma_many++;
+
+JOT(8, "%i=peasycap->vma_many\n", peasycap->vma_many);
+
+return;
+}
+/*****************************************************************************/
+void
+easycap_vma_close(struct vm_area_struct *pvma)
+{
+struct easycap *peasycap;
+
+peasycap = pvma->vm_private_data;
+if (NULL != peasycap) {
+	peasycap->vma_many--;
+	JOT(8, "%i=peasycap->vma_many\n", peasycap->vma_many);
+}
+return;
+}
+/*****************************************************************************/
+int
+easycap_vma_fault(struct vm_area_struct *pvma, struct vm_fault *pvmf)
+{
+int k, m, retcode;
+void *pbuf;
+struct page *page;
+struct easycap *peasycap;
+
+retcode = VM_FAULT_NOPAGE;
+pbuf = (void *)NULL;
+page = (struct page *)NULL;
+
+if (NULL == pvma) {
+	SAY("pvma is NULL\n");
+	return retcode;
+}
+if (NULL == pvmf) {
+	SAY("pvmf is NULL\n");
+	return retcode;
+}
+
+k = (pvmf->pgoff) / (FRAME_BUFFER_SIZE/PAGE_SIZE);
+m = (pvmf->pgoff) % (FRAME_BUFFER_SIZE/PAGE_SIZE);
+
+if (!m)
+	JOT(4, "%4i=k, %4i=m\n", k, m);
+else
+	JOT(16, "%4i=k, %4i=m\n", k, m);
+
+if ((0 > k) || (FRAME_BUFFER_MANY <= k)) {
+	SAY("ERROR: buffer index %i out of range\n", k);
+	return retcode;
+}
+if ((0 > m) || (FRAME_BUFFER_SIZE/PAGE_SIZE <= m)) {
+	SAY("ERROR: page number  %i out of range\n", m);
+	return retcode;
+}
+peasycap = pvma->vm_private_data;
+if (NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL\n");
+	return retcode;
+}
+mutex_lock(&(peasycap->mutex_mmap_video[0]));
+/*---------------------------------------------------------------------------*/
+pbuf = peasycap->frame_buffer[k][m].pgo;
+if (NULL == pbuf) {
+	SAY("ERROR:  pbuf is NULL\n");
+	goto finish;
+}
+page = virt_to_page(pbuf);
+if (NULL == page) {
+	SAY("ERROR:  page is NULL\n");
+	goto finish;
+}
+get_page(page);
+/*---------------------------------------------------------------------------*/
+finish:
+mutex_unlock(&(peasycap->mutex_mmap_video[0]));
+if (NULL == page) {
+	SAY("ERROR:  page is NULL after get_page(page)\n");
+} else {
+	pvmf->page = page;
+	retcode = VM_FAULT_MINOR;
+}
+return retcode;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  ON COMPLETION OF A VIDEO URB ITS DATA IS COPIED TO THE FIELD BUFFERS
+ *  PROVIDED peasycap->video_idle IS ZER0.  REGARDLESS OF THIS BEING TRUE,
+ *  IT IS RESUBMITTED PROVIDED peasycap->video_isoc_streaming IS NOT ZERO.
+ *
+ *  THIS FUNCTION IS AN INTERRUPT SERVICE ROUTINE AND MUST NOT SLEEP.
+ *
+ *  INFORMATION ABOUT THE VALIDITY OF THE CONTENTS OF THE FIELD BUFFER ARE
+ *  STORED IN THE TWO-BYTE STATUS PARAMETER
+ *        peasycap->field_buffer[peasycap->field_fill][0].kount
+ *  NOTICE THAT THE INFORMATION IS STORED ONLY WITH PAGE 0 OF THE FIELD BUFFER.
+ *
+ *  THE LOWER BYTE CONTAINS THE FIELD PARITY BYTE FURNISHED BY THE SAA7113H
+ *  CHIP.
+ *
+ *  THE UPPER BYTE IS ZERO IF NO PROBLEMS, OTHERWISE:
+ *      0 != (kount & 0x8000)   => AT LEAST ONE URB COMPLETED WITH ERRORS
+ *      0 != (kount & 0x4000)   => BUFFER HAS TOO MUCH DATA
+ *      0 != (kount & 0x2000)   => BUFFER HAS NOT ENOUGH DATA
+ *      0 != (kount & 0x0400)   => FIELD WAS SUBMITTED BY BRIDGER ROUTINE
+ *      0 != (kount & 0x0200)   => FIELD BUFFER NOT YET CHECKED
+ *      0 != (kount & 0x0100)   => BUFFER HAS TWO EXTRA BYTES - WHY?
+ */
+/*---------------------------------------------------------------------------*/
+void
+easycap_complete(struct urb *purb)
+{
+static int mt;
+struct easycap *peasycap;
+struct data_buffer *pfield_buffer;
+char errbuf[16];
+int i, more, much, leap, rc, last;
+int videofieldamount;
+unsigned int override;
+int framestatus, framelength, frameactual, frameoffset;
+__u8 *pu;
+#if defined(BRIDGER)
+struct timeval timeval;
+long long usec;
+#endif /*BRIDGER*/
+
+if (NULL == purb) {
+	SAY("ERROR: easycap_complete(): purb is NULL\n");
+	return;
+}
+peasycap = purb->context;
+if (NULL == peasycap) {
+	SAY("ERROR: easycap_complete(): peasycap is NULL\n");
+	return;
+}
+
+if (peasycap->video_eof)
+	return;
+
+for (i = 0; i < VIDEO_ISOC_BUFFER_MANY; i++)
+	if (purb->transfer_buffer == peasycap->video_isoc_buffer[i].pgo)
+		break;
+JOT(16, "%2i=urb\n", i);
+last = peasycap->video_isoc_sequence;
+if ((((VIDEO_ISOC_BUFFER_MANY - 1) == last) && \
+						(0 != i)) || \
+	(((VIDEO_ISOC_BUFFER_MANY - 1) != last) && \
+						((last + 1) != i))) {
+	SAY("ERROR: out-of-order urbs %i,%i ... continuing\n", last, i);
+}
+peasycap->video_isoc_sequence = i;
+
+if (peasycap->video_idle) {
+	JOT(16, "%i=video_idle  %i=video_isoc_streaming\n", \
+			peasycap->video_idle, peasycap->video_isoc_streaming);
+	if (peasycap->video_isoc_streaming) {
+		rc = usb_submit_urb(purb, GFP_ATOMIC);
+		if (0 != rc) {
+			SAY("ERROR: while %i=video_idle, " \
+					"usb_submit_urb() failed with rc:\n", \
+							peasycap->video_idle);
+			switch (rc) {
+			case -ENOMEM: {
+				SAY("ENOMEM\n");
+				break;
+			}
+			case -ENODEV: {
+				SAY("ENODEV\n");
+				break;
+			}
+			case -ENXIO: {
+				SAY("ENXIO\n");
+				break;
+			}
+			case -EINVAL: {
+				SAY("EINVAL\n");
+				break;
+			}
+			case -EAGAIN: {
+				SAY("EAGAIN\n");
+				break;
+			}
+			case -EFBIG: {
+				SAY("EFBIG\n");
+				break;
+			}
+			case -EPIPE: {
+				SAY("EPIPE\n");
+				break;
+			}
+			case -EMSGSIZE: {
+				SAY("EMSGSIZE\n");
+				break;
+			}
+			case -ENOSPC: {
+				SAY("ENOSPC\n");
+				break;
+			}
+			default: {
+				SAY("0x%08X\n", rc);
+				break;
+			}
+			}
+		}
+	}
+return;
+}
+override = 0;
+/*---------------------------------------------------------------------------*/
+if (FIELD_BUFFER_MANY <= peasycap->field_fill) {
+	SAY("ERROR: bad peasycap->field_fill\n");
+	return;
+}
+if (purb->status) {
+	if ((-ESHUTDOWN == purb->status) || (-ENOENT == purb->status)) {
+		JOT(8, "urb status -ESHUTDOWN or -ENOENT\n");
+		return;
+	}
+
+	(peasycap->field_buffer[peasycap->field_fill][0].kount) |= 0x8000 ;
+	SAY("ERROR: bad urb status:\n");
+	switch (purb->status) {
+	case -EINPROGRESS: {
+		SAY("-EINPROGRESS\n"); break;
+	}
+	case -ENOSR: {
+		SAY("-ENOSR\n"); break;
+	}
+	case -EPIPE: {
+		SAY("-EPIPE\n"); break;
+	}
+	case -EOVERFLOW: {
+		SAY("-EOVERFLOW\n"); break;
+	}
+	case -EPROTO: {
+		SAY("-EPROTO\n"); break;
+	}
+	case -EILSEQ: {
+		SAY("-EILSEQ\n"); break;
+	}
+	case -ETIMEDOUT: {
+		SAY("-ETIMEDOUT\n"); break;
+	}
+	case -EMSGSIZE: {
+		SAY("-EMSGSIZE\n"); break;
+	}
+	case -EOPNOTSUPP: {
+		SAY("-EOPNOTSUPP\n"); break;
+	}
+	case -EPFNOSUPPORT: {
+		SAY("-EPFNOSUPPORT\n"); break;
+	}
+	case -EAFNOSUPPORT: {
+		SAY("-EAFNOSUPPORT\n"); break;
+	}
+	case -EADDRINUSE: {
+		SAY("-EADDRINUSE\n"); break;
+	}
+	case -EADDRNOTAVAIL: {
+		SAY("-EADDRNOTAVAIL\n"); break;
+	}
+	case -ENOBUFS: {
+		SAY("-ENOBUFS\n"); break;
+	}
+	case -EISCONN: {
+		SAY("-EISCONN\n"); break;
+	}
+	case -ENOTCONN: {
+		SAY("-ENOTCONN\n"); break;
+	}
+	case -ESHUTDOWN: {
+		SAY("-ESHUTDOWN\n"); break;
+	}
+	case -ENOENT: {
+		SAY("-ENOENT\n"); break;
+	}
+	case -ECONNRESET: {
+		SAY("-ECONNRESET\n"); break;
+	}
+	case -ENOSPC: {
+		SAY("ENOSPC\n"); break;
+	}
+	default: {
+		SAY("unknown error code 0x%08X\n", purb->status); break;
+	}
+	}
+/*---------------------------------------------------------------------------*/
+} else {
+	for (i = 0;  i < purb->number_of_packets; i++) {
+		if (0 != purb->iso_frame_desc[i].status) {
+			(peasycap->field_buffer\
+				[peasycap->field_fill][0].kount) |= 0x8000 ;
+			switch (purb->iso_frame_desc[i].status) {
+			case  0: {
+				strcpy(&errbuf[0], "OK"); break;
+			}
+			case -ENOENT: {
+				strcpy(&errbuf[0], "-ENOENT"); break;
+			}
+			case -EINPROGRESS: {
+				strcpy(&errbuf[0], "-EINPROGRESS"); break;
+			}
+			case -EPROTO: {
+				strcpy(&errbuf[0], "-EPROTO"); break;
+			}
+			case -EILSEQ: {
+				strcpy(&errbuf[0], "-EILSEQ"); break;
+			}
+			case -ETIME: {
+				strcpy(&errbuf[0], "-ETIME"); break;
+			}
+			case -ETIMEDOUT: {
+				strcpy(&errbuf[0], "-ETIMEDOUT"); break;
+			}
+			case -EPIPE: {
+				strcpy(&errbuf[0], "-EPIPE"); break;
+			}
+			case -ECOMM: {
+				strcpy(&errbuf[0], "-ECOMM"); break;
+			}
+			case -ENOSR: {
+				strcpy(&errbuf[0], "-ENOSR"); break;
+			}
+			case -EOVERFLOW: {
+				strcpy(&errbuf[0], "-EOVERFLOW"); break;
+			}
+			case -EREMOTEIO: {
+				strcpy(&errbuf[0], "-EREMOTEIO"); break;
+			}
+			case -ENODEV: {
+				strcpy(&errbuf[0], "-ENODEV"); break;
+			}
+			case -EXDEV: {
+				strcpy(&errbuf[0], "-EXDEV"); break;
+			}
+			case -EINVAL: {
+				strcpy(&errbuf[0], "-EINVAL"); break;
+			}
+			case -ECONNRESET: {
+				strcpy(&errbuf[0], "-ECONNRESET"); break;
+			}
+			case -ENOSPC: {
+				SAY("ENOSPC\n"); break;
+			}
+			case -ESHUTDOWN: {
+				strcpy(&errbuf[0], "-ESHUTDOWN"); break;
+			}
+			default: {
+				strcpy(&errbuf[0], "unknown error"); break;
+			}
+			}
+		}
+		framestatus = purb->iso_frame_desc[i].status;
+		framelength = purb->iso_frame_desc[i].length;
+		frameactual = purb->iso_frame_desc[i].actual_length;
+		frameoffset = purb->iso_frame_desc[i].offset;
+
+		JOT(16, "frame[%2i]:" \
+				"%4i=status "  \
+				"%4i=actual "  \
+				"%4i=length "  \
+				"%5i=offset\n", \
+			i, framestatus, frameactual, framelength, frameoffset);
+		if (!purb->iso_frame_desc[i].status) {
+			more = purb->iso_frame_desc[i].actual_length;
+			pfield_buffer = &peasycap->field_buffer\
+				  [peasycap->field_fill][peasycap->field_page];
+			videofieldamount = (peasycap->field_page * \
+				PAGE_SIZE) + \
+				(int)(pfield_buffer->pto - pfield_buffer->pgo);
+		if (4 == more)
+			mt++;
+		if (4 < more) {
+			if (mt) {
+				JOT(8, "%4i empty video urb frames\n", mt);
+				mt = 0;
+			}
+			if (FIELD_BUFFER_MANY <= peasycap->field_fill) {
+				SAY("ERROR: bad peasycap->field_fill\n");
+				return;
+			}
+			if (FIELD_BUFFER_SIZE/PAGE_SIZE <= \
+							peasycap->field_page) {
+				SAY("ERROR: bad peasycap->field_page\n");
+				return;
+			}
+			pfield_buffer = &peasycap->field_buffer\
+				[peasycap->field_fill][peasycap->field_page];
+			pu = (__u8 *)(purb->transfer_buffer + \
+					purb->iso_frame_desc[i].offset);
+			if (0x80 & *pu)
+				leap = 8;
+			else
+				leap = 4;
+/*--------------------------------------------------------------------------*/
+/*
+ *  EIGHT-BYTE END-OF-VIDEOFIELD MARKER.
+ *  NOTE:  A SUCCESSION OF URB FRAMES FOLLOWING THIS ARE EMPTY,
+ *         CORRESPONDING TO THE FIELD FLYBACK (VERTICAL BLANKING) PERIOD.
+ *
+ *  PROVIDED THE FIELD BUFFER CONTAINS GOOD DATA AS INDICATED BY A ZERO UPPER
+ *  BYTE OF
+ *        peasycap->field_buffer[peasycap->field_fill][0].kount
+ *  THE CONTENTS OF THE FIELD BUFFER ARE OFFERED TO dqbuf(), field_read IS
+ *  UPDATED AND field_fill IS BUMPED.  IF THE FIELD BUFFER CONTAINS BAD DATA
+ *  NOTHING IS OFFERED TO dqbuf().
+ *
+ *  THE DECISION ON WHETHER THE PARITY OF THE OFFERED FIELD BUFFER IS RIGHT
+ *  RESTS WITH dqbuf().
+ */
+/*---------------------------------------------------------------------------*/
+			if ((8 == more) || override) {
+				if (videofieldamount > \
+						peasycap->videofieldamount) {
+					if (2 == videofieldamount - \
+							peasycap->\
+							videofieldamount)
+						(peasycap->field_buffer\
+						[peasycap->field_fill]\
+							[0].kount) |= 0x0100;
+					else
+						(peasycap->field_buffer\
+						[peasycap->field_fill]\
+							[0].kount) |= 0x4000;
+					} else if (videofieldamount < \
+							peasycap->\
+							videofieldamount) {
+						(peasycap->field_buffer\
+						[peasycap->field_fill]\
+							[0].kount) |= 0x2000;
+					}
+				if (!(0xFF00 & peasycap->field_buffer\
+						[peasycap->field_fill]\
+						[0].kount)) {
+					(peasycap->video_junk)--;
+					if (-16 > peasycap->video_junk)
+						peasycap->video_junk = -16;
+					peasycap->field_read = \
+							(peasycap->\
+								field_fill)++;
+
+					if (FIELD_BUFFER_MANY <= \
+						peasycap->field_fill)
+						peasycap->field_fill = 0;
+					peasycap->field_page = 0;
+					pfield_buffer = &peasycap->\
+						field_buffer\
+						[peasycap->field_fill]\
+						[peasycap->field_page];
+					pfield_buffer->pto = \
+							pfield_buffer->pgo;
+
+					JOT(8, "bumped to: %i=peasycap->" \
+						"field_fill  %i=parity\n", \
+						peasycap->field_fill, \
+						0x00FF & pfield_buffer->kount);
+					JOT(8, "field buffer %i has %i " \
+						"bytes fit to be read\n", \
+						peasycap->field_read, \
+						videofieldamount);
+					JOT(8, "wakeup call to wq_video, " \
+						"%i=field_read %i=field_fill "\
+						"%i=parity\n", \
+						peasycap->field_read, \
+						peasycap->field_fill, \
+						0x00FF & peasycap->\
+						field_buffer[peasycap->\
+						field_read][0].kount);
+					wake_up_interruptible(&(peasycap->\
+								wq_video));
+					do_gettimeofday(&peasycap->timeval7);
+					} else {
+					peasycap->video_junk++;
+					JOT(8, "field buffer %i had %i " \
+						"bytes, now discarded\n", \
+						peasycap->field_fill, \
+						videofieldamount);
+
+					(peasycap->field_fill)++;
+
+					if (FIELD_BUFFER_MANY <= \
+							peasycap->field_fill)
+						peasycap->field_fill = 0;
+					peasycap->field_page = 0;
+					pfield_buffer = \
+						&peasycap->field_buffer\
+						[peasycap->field_fill]\
+						[peasycap->field_page];
+					pfield_buffer->pto = \
+							pfield_buffer->pgo;
+
+					JOT(8, "bumped to: %i=peasycap->" \
+						"field_fill  %i=parity\n", \
+						peasycap->field_fill, \
+						0x00FF & pfield_buffer->kount);
+				}
+				if (8 == more) {
+					JOT(8, "end-of-field: received " \
+						"parity byte 0x%02X\n", \
+						(0xFF & *pu));
+					if (0x40 & *pu)
+						pfield_buffer->kount = 0x0000;
+					else
+						pfield_buffer->kount = 0x0001;
+					JOT(8, "end-of-field: 0x%02X=kount\n",\
+						0xFF & pfield_buffer->kount);
+				}
+			}
+/*---------------------------------------------------------------------------*/
+/*
+ *  COPY more BYTES FROM ISOC BUFFER TO FIELD BUFFER
+ */
+/*---------------------------------------------------------------------------*/
+			pu += leap;
+			more -= leap;
+
+			if (FIELD_BUFFER_MANY <= peasycap->field_fill) {
+				SAY("ERROR: bad peasycap->field_fill\n");
+				return;
+			}
+			if (FIELD_BUFFER_SIZE/PAGE_SIZE <= \
+							peasycap->field_page) {
+				SAY("ERROR: bad peasycap->field_page\n");
+				return;
+			}
+			pfield_buffer = &peasycap->field_buffer\
+				[peasycap->field_fill][peasycap->field_page];
+			while (more) {
+				pfield_buffer = &peasycap->field_buffer\
+						[peasycap->field_fill]\
+						[peasycap->field_page];
+				if (PAGE_SIZE < (pfield_buffer->pto - \
+							pfield_buffer->pgo)) {
+					SAY("ERROR: bad pfield_buffer->pto\n");
+					return;
+				}
+				if (PAGE_SIZE == (pfield_buffer->pto - \
+							pfield_buffer->pgo)) {
+					(peasycap->field_page)++;
+					if (FIELD_BUFFER_SIZE/PAGE_SIZE <= \
+							peasycap->field_page) {
+						JOT(16, "wrapping peasycap->" \
+							"field_page\n");
+						peasycap->field_page = 0;
+					}
+					pfield_buffer = &peasycap->\
+							field_buffer\
+							[peasycap->field_fill]\
+							[peasycap->field_page];
+					pfield_buffer->pto = \
+							pfield_buffer->pgo;
+				}
+
+				much = PAGE_SIZE - (int)(pfield_buffer->pto - \
+							pfield_buffer->pgo);
+
+				if (much > more)
+					much = more;
+				memcpy(pfield_buffer->pto, pu, much);
+				pu += much;
+				(pfield_buffer->pto) += much;
+				more -= much;
+				}
+			}
+		}
+	}
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *
+ *
+ *             *** UNDER DEVELOPMENT/TESTING - NOT READY YET! ***
+ *
+ *
+ *
+ *  VIDEOTAPES MAY HAVE BEEN MANUALLY PAUSED AND RESTARTED DURING RECORDING.
+ *  THIS CAUSES LOSS OF SYNC, CONFUSING DOWNSTREAM USERSPACE PROGRAMS WHICH
+ *  MAY INTERPRET THE INTERRUPTION AS A SYMPTOM OF LATENCY.  TO OVERCOME THIS
+ *  THE DRIVER BRIDGES THE HIATUS BY SENDING DUMMY VIDEO FRAMES AT ROUGHLY
+ *  THE RIGHT TIME INTERVALS IN THE HOPE OF PERSUADING THE DOWNSTREAM USERSPACE
+ *  PROGRAM TO RESUME NORMAL SERVICE WHEN THE INTERRUPTION IS OVER.
+ */
+/*---------------------------------------------------------------------------*/
+#if defined(BRIDGER)
+do_gettimeofday(&timeval);
+if (peasycap->timeval7.tv_sec) {
+	usec = 1000000*(timeval.tv_sec  - peasycap->timeval7.tv_sec) + \
+			(timeval.tv_usec - peasycap->timeval7.tv_usec);
+	if (usec > (peasycap->usec + peasycap->tolerate)) {
+		JOT(8, "bridging hiatus\n");
+		peasycap->video_junk = 0;
+		peasycap->field_buffer[peasycap->field_fill][0].kount |= 0x0400;
+
+		peasycap->field_read = (peasycap->field_fill)++;
+
+		if (FIELD_BUFFER_MANY <= peasycap->field_fill) \
+						peasycap->field_fill = 0;
+		peasycap->field_page = 0;
+		pfield_buffer = &peasycap->field_buffer\
+				[peasycap->field_fill][peasycap->field_page];
+		pfield_buffer->pto = pfield_buffer->pgo;
+
+		JOT(8, "bumped to: %i=peasycap->field_fill  %i=parity\n", \
+			peasycap->field_fill, 0x00FF & pfield_buffer->kount);
+		JOT(8, "field buffer %i has %i bytes to be overwritten\n", \
+			peasycap->field_read, videofieldamount);
+		JOT(8, "wakeup call to wq_video, " \
+			"%i=field_read %i=field_fill %i=parity\n", \
+			peasycap->field_read, peasycap->field_fill, \
+			0x00FF & \
+			peasycap->field_buffer[peasycap->field_read][0].kount);
+		wake_up_interruptible(&(peasycap->wq_video));
+		do_gettimeofday(&peasycap->timeval7);
+	}
+}
+#endif /*BRIDGER*/
+/*---------------------------------------------------------------------------*/
+/*
+ *  RESUBMIT THIS URB, UNLESS A SEVERE PERSISTENT ERROR CONDITION EXISTS.
+ *
+ *  IF THE WAIT QUEUES ARE NOT CLEARED IN RESPONSE TO AN ERROR CONDITION
+ *  THE USERSPACE PROGRAM, E.G. mplayer, MAY HANG ON EXIT.   BEWARE.
+ */
+/*---------------------------------------------------------------------------*/
+if (VIDEO_ISOC_BUFFER_MANY <= peasycap->video_junk) {
+	SAY("easycap driver shutting down on condition green\n");
+	peasycap->video_eof = 1;
+	peasycap->audio_eof = 1;
+	peasycap->video_junk = -VIDEO_ISOC_BUFFER_MANY;
+	wake_up_interruptible(&(peasycap->wq_video));
+	wake_up_interruptible(&(peasycap->wq_audio));
+	return;
+}
+if (peasycap->video_isoc_streaming) {
+	rc = usb_submit_urb(purb, GFP_ATOMIC);
+	if (0 != rc) {
+		SAY("ERROR: while %i=video_idle, usb_submit_urb() failed " \
+					"with rc:\n", peasycap->video_idle);
+		switch (rc) {
+		case -ENOMEM: {
+			SAY("ENOMEM\n"); break;
+		}
+		case -ENODEV: {
+			SAY("ENODEV\n"); break;
+		}
+		case -ENXIO: {
+			SAY("ENXIO\n"); break;
+		}
+		case -EINVAL: {
+			SAY("EINVAL\n"); break;
+		}
+		case -EAGAIN: {
+			SAY("EAGAIN\n"); break;
+		}
+		case -EFBIG: {
+			SAY("EFBIG\n"); break;
+		}
+		case -EPIPE: {
+			SAY("EPIPE\n"); break;
+		}
+		case -EMSGSIZE: {
+			SAY("EMSGSIZE\n");  break;
+		}
+		case -ENOSPC: {
+			SAY("ENOSPC\n"); break;
+		}
+		default: {
+			SAY("0x%08X\n", rc); break;
+		}
+		}
+	}
+}
+return;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *
+ *                                  FIXME
+ *
+ *
+ *  THIS FUNCTION ASSUMES THAT, ON EACH AND EVERY OCCASION THAT THE DEVICE IS
+ *  PHYSICALLY PLUGGED IN, INTERFACE 0 IS PROBED FIRST.
+ *  IF THIS IS NOT TRUE, THERE IS THE POSSIBILITY OF AN Oops.
+ *
+ *  THIS HAS NEVER BEEN A PROBLEM IN PRACTICE, BUT SOMETHING SEEMS WRONG HERE.
+ */
+/*---------------------------------------------------------------------------*/
+int
+easycap_usb_probe(struct usb_interface *pusb_interface, \
+						const struct usb_device_id *id)
+{
+struct usb_device *pusb_device, *pusb_device1;
+struct usb_host_interface *pusb_host_interface;
+struct usb_endpoint_descriptor *pepd;
+struct usb_interface_descriptor *pusb_interface_descriptor;
+struct usb_interface_assoc_descriptor *pusb_interface_assoc_descriptor;
+struct urb *purb;
+static struct easycap *peasycap /*=NULL*/;
+struct data_urb *pdata_urb;
+size_t wMaxPacketSize;
+int ISOCwMaxPacketSize;
+int BULKwMaxPacketSize;
+int INTwMaxPacketSize;
+int CTRLwMaxPacketSize;
+__u8 bEndpointAddress;
+__u8 ISOCbEndpointAddress;
+__u8 INTbEndpointAddress;
+int isin, i, j, k, m;
+__u8 bInterfaceNumber;
+__u8 bInterfaceClass;
+__u8 bInterfaceSubClass;
+void *pbuf;
+int okalt[8], isokalt;
+int okepn[8], isokepn;
+int okmps[8], isokmps;
+int maxpacketsize;
+int rc;
+
+JOT(4, "\n");
+
+if ((struct usb_interface *)NULL == pusb_interface) {
+	SAY("ERROR: pusb_interface is NULL\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  GET POINTER TO STRUCTURE usb_device
+ */
+/*---------------------------------------------------------------------------*/
+pusb_device1 = container_of(pusb_interface->dev.parent, \
+						struct usb_device, dev);
+if ((struct usb_device *)NULL == pusb_device1) {
+	SAY("ERROR: pusb_device1 is NULL\n");
+	return -EFAULT;
+}
+pusb_device = usb_get_dev(pusb_device1);
+if ((struct usb_device *)NULL == pusb_device) {
+	SAY("ERROR: pusb_device is NULL\n");
+	return -EFAULT;
+}
+if ((unsigned long int)pusb_device1 != (unsigned long int)pusb_device) {
+	JOT(4, "ERROR: pusb_device1 != pusb_device\n");
+	return -EFAULT;
+}
+
+JOT(4, "bNumConfigurations=%i\n", pusb_device->descriptor.bNumConfigurations);
+
+/*---------------------------------------------------------------------------*/
+pusb_host_interface = pusb_interface->cur_altsetting;
+if (NULL == pusb_host_interface) {
+	SAY("ERROR: pusb_host_interface is NULL\n");
+	return -EFAULT;
+}
+pusb_interface_descriptor = &(pusb_host_interface->desc);
+if (NULL == pusb_interface_descriptor) {
+	SAY("ERROR: pusb_interface_descriptor is NULL\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  GET PROPERTIES OF PROBED INTERFACE
+ */
+/*---------------------------------------------------------------------------*/
+bInterfaceNumber = pusb_interface_descriptor->bInterfaceNumber;
+bInterfaceClass = pusb_interface_descriptor->bInterfaceClass;
+bInterfaceSubClass = pusb_interface_descriptor->bInterfaceSubClass;
+
+JOT(4, "intf[%i]: pusb_interface->num_altsetting=%i\n", \
+			bInterfaceNumber, pusb_interface->num_altsetting);
+JOT(4, "intf[%i]: pusb_interface->cur_altsetting - " \
+			"pusb_interface->altsetting=%li\n", bInterfaceNumber, \
+			(long int)(pusb_interface->cur_altsetting - \
+						pusb_interface->altsetting));
+switch (bInterfaceClass) {
+case USB_CLASS_AUDIO: {
+	JOT(4, "intf[%i]: bInterfaceClass=0x%02X=USB_CLASS_AUDIO\n", \
+				bInterfaceNumber, bInterfaceClass); break;
+	}
+case USB_CLASS_VIDEO: {
+	JOT(4, "intf[%i]: bInterfaceClass=0x%02X=USB_CLASS_VIDEO\n", \
+				bInterfaceNumber, bInterfaceClass); break;
+	}
+case USB_CLASS_VENDOR_SPEC: {
+	JOT(4, "intf[%i]: bInterfaceClass=0x%02X=USB_CLASS_VENDOR_SPEC\n", \
+				bInterfaceNumber, bInterfaceClass); break;
+	}
+default:
+	break;
+}
+switch (bInterfaceSubClass) {
+case 0x01: {
+	JOT(4, "intf[%i]: bInterfaceSubClass=0x%02X=AUDIOCONTROL\n", \
+			bInterfaceNumber, bInterfaceSubClass); break;
+}
+case 0x02: {
+	JOT(4, "intf[%i]: bInterfaceSubClass=0x%02X=AUDIOSTREAMING\n", \
+			bInterfaceNumber, bInterfaceSubClass); break;
+}
+case 0x03: {
+	JOT(4, "intf[%i]: bInterfaceSubClass=0x%02X=MIDISTREAMING\n", \
+			bInterfaceNumber, bInterfaceSubClass); break;
+}
+default:
+	break;
+}
+/*---------------------------------------------------------------------------*/
+pusb_interface_assoc_descriptor = pusb_interface->intf_assoc;
+if (NULL != pusb_interface_assoc_descriptor) {
+	JOT(4, "intf[%i]: bFirstInterface=0x%02X  bInterfaceCount=0x%02X\n", \
+			bInterfaceNumber, \
+			pusb_interface_assoc_descriptor->bFirstInterface, \
+			pusb_interface_assoc_descriptor->bInterfaceCount);
+} else {
+JOT(4, "intf[%i]: pusb_interface_assoc_descriptor is NULL\n", \
+							bInterfaceNumber);
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  A NEW struct easycap IS ALWAYS ALLOCATED WHEN INTERFACE 0 IS PROBED.
+ *  IT IS NOT POSSIBLE HERE TO FREE ANY EXISTING struct easycap.  THIS
+ *  SHOULD HAVE BEEN DONE BY easycap_delete() WHEN THE DEVICE WAS PHYSICALLY
+ *  UNPLUGGED.
+ */
+/*---------------------------------------------------------------------------*/
+if (0 == bInterfaceNumber) {
+	peasycap = kzalloc(sizeof(struct easycap), GFP_KERNEL);
+	if (NULL == peasycap) {
+		SAY("ERROR: Could not allocate peasycap\n");
+		return -ENOMEM;
+	} else {
+		peasycap->allocation_video_struct = sizeof(struct easycap);
+		peasycap->allocation_video_page = 0;
+		peasycap->allocation_video_urb = 0;
+		peasycap->allocation_audio_struct = 0;
+		peasycap->allocation_audio_page = 0;
+		peasycap->allocation_audio_urb = 0;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  INITIALIZE THE NEW easycap STRUCTURE.
+ *  NO PARAMETERS ARE SPECIFIED HERE REQUIRING THE SETTING OF REGISTERS.
+ *  THAT IS DONE FIRST BY easycap_open() AND LATER BY easycap_ioctl().
+ */
+/*---------------------------------------------------------------------------*/
+	peasycap->pusb_device = pusb_device;
+	peasycap->pusb_interface = pusb_interface;
+
+	kref_init(&peasycap->kref);
+	JOT(8, "intf[%i]: after kref_init(..._video) " \
+			"%i=peasycap->kref.refcount.counter\n", \
+			bInterfaceNumber, peasycap->kref.refcount.counter);
+
+	init_waitqueue_head(&(peasycap->wq_video));
+	init_waitqueue_head(&(peasycap->wq_audio));
+
+	mutex_init(&(peasycap->mutex_timeval0));
+	mutex_init(&(peasycap->mutex_timeval1));
+
+	for (k = 0; k < FRAME_BUFFER_MANY; k++)
+		mutex_init(&(peasycap->mutex_mmap_video[k]));
+
+	peasycap->ilk = 0;
+	peasycap->microphone = false;
+
+	peasycap->video_interface = -1;
+	peasycap->video_altsetting_on = -1;
+	peasycap->video_altsetting_off = -1;
+	peasycap->video_endpointnumber = -1;
+	peasycap->video_isoc_maxframesize = -1;
+	peasycap->video_isoc_buffer_size = -1;
+
+	peasycap->audio_interface = -1;
+	peasycap->audio_altsetting_on = -1;
+	peasycap->audio_altsetting_off = -1;
+	peasycap->audio_endpointnumber = -1;
+	peasycap->audio_isoc_maxframesize = -1;
+	peasycap->audio_isoc_buffer_size = -1;
+
+	peasycap->frame_buffer_many = FRAME_BUFFER_MANY;
+
+	if ((struct mutex *)NULL == &(peasycap->mutex_mmap_video[0])) {
+		SAY("ERROR: &(peasycap->mutex_mmap_video[%i]) is NULL\n", 0);
+		return -EFAULT;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  DYNAMICALLY FILL IN THE AVAILABLE FORMATS.
+ */
+/*---------------------------------------------------------------------------*/
+	rc = fillin_formats();
+	if (0 > rc) {
+		SAY("ERROR: fillin_formats() returned %i\n", rc);
+		return -EFAULT;
+	}
+	JOT(4, "%i formats available\n", rc);
+	} else {
+/*---------------------------------------------------------------------------*/
+		if ((struct easycap *)NULL == peasycap) {
+			SAY("ERROR: peasycap is NULL " \
+					"when probing interface %i\n", \
+							bInterfaceNumber);
+			return -EFAULT;
+		}
+
+	JOT(8, "kref_get() with %i=peasycap->kref.refcount.counter\n", \
+					(int)peasycap->kref.refcount.counter);
+	kref_get(&peasycap->kref);
+}
+/*---------------------------------------------------------------------------*/
+if ((USB_CLASS_VIDEO == bInterfaceClass) || \
+	(USB_CLASS_VENDOR_SPEC == bInterfaceClass)) {
+	if (-1 == peasycap->video_interface) {
+		peasycap->video_interface = bInterfaceNumber;
+		JOT(4, "setting peasycap->video_interface=%i\n", \
+						peasycap->video_interface);
+	} else {
+		if (peasycap->video_interface != bInterfaceNumber) {
+			SAY("ERROR: attempting to reset " \
+					"peasycap->video_interface\n");
+			SAY("...... continuing with " \
+					"%i=peasycap->video_interface\n", \
+					peasycap->video_interface);
+		}
+	}
+} else if ((USB_CLASS_AUDIO == bInterfaceClass) && \
+						(0x02 == bInterfaceSubClass)) {
+	if (-1 == peasycap->audio_interface) {
+		peasycap->audio_interface = bInterfaceNumber;
+		JOT(4, "setting peasycap->audio_interface=%i\n", \
+						 peasycap->audio_interface);
+	} else {
+		if (peasycap->audio_interface != bInterfaceNumber) {
+			SAY("ERROR: attempting to reset " \
+					"peasycap->audio_interface\n");
+			SAY("...... continuing with " \
+					"%i=peasycap->audio_interface\n", \
+					peasycap->audio_interface);
+		}
+	}
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  INVESTIGATE ALL ALTSETTINGS.
+ *  DONE IN DETAIL BECAUSE USB DEVICE 05e1:0408 HAS DISPARATE INCARNATIONS.
+ */
+/*---------------------------------------------------------------------------*/
+isokalt = 0;
+isokepn = 0;
+isokmps = 0;
+
+for (i = 0; i < pusb_interface->num_altsetting; i++) {
+	pusb_host_interface = &(pusb_interface->altsetting[i]);
+	if ((struct usb_host_interface *)NULL == pusb_host_interface) {
+		SAY("ERROR: pusb_host_interface is NULL\n");
+		return -EFAULT;
+	}
+	pusb_interface_descriptor = &(pusb_host_interface->desc);
+	if ((struct usb_interface_descriptor *)NULL == \
+						pusb_interface_descriptor) {
+		SAY("ERROR: pusb_interface_descriptor is NULL\n");
+		return -EFAULT;
+	}
+
+	JOT(4, "intf[%i]alt[%i]: desc.bDescriptorType=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bDescriptorType);
+	JOT(4, "intf[%i]alt[%i]: desc.bInterfaceNumber=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bInterfaceNumber);
+	JOT(4, "intf[%i]alt[%i]: desc.bAlternateSetting=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bAlternateSetting);
+	JOT(4, "intf[%i]alt[%i]: desc.bNumEndpoints=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bNumEndpoints);
+	JOT(4, "intf[%i]alt[%i]: desc.bInterfaceClass=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bInterfaceClass);
+	JOT(4, "intf[%i]alt[%i]: desc.bInterfaceSubClass=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bInterfaceSubClass);
+	JOT(4, "intf[%i]alt[%i]: desc.bInterfaceProtocol=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->bInterfaceProtocol);
+	JOT(4, "intf[%i]alt[%i]: desc.iInterface=0x%02X\n", \
+	bInterfaceNumber, i, pusb_interface_descriptor->iInterface);
+
+	ISOCwMaxPacketSize = -1;
+	BULKwMaxPacketSize = -1;
+	INTwMaxPacketSize = -1;
+	CTRLwMaxPacketSize = -1;
+	ISOCbEndpointAddress = 0;
+	INTbEndpointAddress = 0;
+
+	if (0 == pusb_interface_descriptor->bNumEndpoints)
+				JOT(4, "intf[%i]alt[%i] has no endpoints\n", \
+							bInterfaceNumber, i);
+/*---------------------------------------------------------------------------*/
+	for (j = 0; j < pusb_interface_descriptor->bNumEndpoints; j++) {
+		pepd = &(pusb_host_interface->endpoint[j].desc);
+		if ((struct usb_endpoint_descriptor *)NULL == pepd) {
+			SAY("ERROR:  pepd is NULL.\n");
+			SAY("...... skipping\n");
+			continue;
+		}
+		wMaxPacketSize = le16_to_cpu(pepd->wMaxPacketSize);
+		bEndpointAddress = pepd->bEndpointAddress;
+
+		JOT(4, "intf[%i]alt[%i]end[%i]: bEndpointAddress=0x%X\n", \
+				bInterfaceNumber, i, j, \
+				pepd->bEndpointAddress);
+		JOT(4, "intf[%i]alt[%i]end[%i]: bmAttributes=0x%X\n", \
+				bInterfaceNumber, i, j, \
+				pepd->bmAttributes);
+		JOT(4, "intf[%i]alt[%i]end[%i]: wMaxPacketSize=%i\n", \
+				bInterfaceNumber, i, j, \
+				pepd->wMaxPacketSize);
+		JOT(4, "intf[%i]alt[%i]end[%i]: bInterval=%i\n",
+				bInterfaceNumber, i, j, \
+				pepd->bInterval);
+
+		if (pepd->bEndpointAddress & USB_DIR_IN) {
+			JOT(4, "intf[%i]alt[%i]end[%i] is an  IN  endpoint\n",\
+						bInterfaceNumber, i, j);
+			isin = 1;
+		} else {
+			JOT(4, "intf[%i]alt[%i]end[%i] is an  OUT endpoint\n",\
+						bInterfaceNumber, i, j);
+			SAY("ERROR: OUT endpoint unexpected\n");
+			SAY("...... continuing\n");
+			isin = 0;
+		}
+		if ((pepd->bmAttributes & \
+				USB_ENDPOINT_XFERTYPE_MASK) == \
+				USB_ENDPOINT_XFER_ISOC) {
+			JOT(4, "intf[%i]alt[%i]end[%i] is an ISOC endpoint\n",\
+						bInterfaceNumber, i, j);
+			if (isin) {
+				switch (bInterfaceClass) {
+				case USB_CLASS_VIDEO:
+				case USB_CLASS_VENDOR_SPEC: {
+					if (!peasycap) {
+						SAY("MISTAKE: " \
+							"peasycap is NULL\n");
+						return -EFAULT;
+					}
+					if (pepd->wMaxPacketSize) {
+						if (8 > isokalt) {
+							okalt[isokalt] = i;
+							JOT(4,\
+							"%i=okalt[%i]\n", \
+							okalt[isokalt], \
+							isokalt);
+							isokalt++;
+						}
+						if (8 > isokepn) {
+							okepn[isokepn] = \
+							pepd->\
+							bEndpointAddress & \
+							0x0F;
+							JOT(4,\
+							"%i=okepn[%i]\n", \
+							okepn[isokepn], \
+							isokepn);
+							isokepn++;
+						}
+						if (8 > isokmps) {
+							okmps[isokmps] = \
+							le16_to_cpu(pepd->\
+							wMaxPacketSize);
+							JOT(4,\
+							"%i=okmps[%i]\n", \
+							okmps[isokmps], \
+							isokmps);
+							isokmps++;
+						}
+					} else {
+						if (-1 == peasycap->\
+							video_altsetting_off) {
+							peasycap->\
+							video_altsetting_off =\
+									 i;
+							JOT(4, "%i=video_" \
+							"altsetting_off " \
+								"<====\n", \
+							peasycap->\
+							video_altsetting_off);
+						} else {
+							SAY("ERROR: peasycap" \
+							"->video_altsetting_" \
+							"off already set\n");
+							SAY("...... " \
+							"continuing with " \
+							"%i=peasycap->video_" \
+							"altsetting_off\n", \
+							peasycap->\
+							video_altsetting_off);
+						}
+					}
+					break;
+				}
+				case USB_CLASS_AUDIO: {
+					if (0x02 != bInterfaceSubClass)
+						break;
+					if (!peasycap) {
+						SAY("MISTAKE: " \
+						"peasycap is NULL\n");
+						return -EFAULT;
+					}
+					if (pepd->wMaxPacketSize) {
+						if (8 > isokalt) {
+							okalt[isokalt] = i ;
+							JOT(4,\
+							"%i=okalt[%i]\n", \
+							okalt[isokalt], \
+							isokalt);
+							isokalt++;
+						}
+						if (8 > isokepn) {
+							okepn[isokepn] = \
+							pepd->\
+							bEndpointAddress & \
+							0x0F;
+							JOT(4,\
+							"%i=okepn[%i]\n", \
+							okepn[isokepn], \
+							isokepn);
+							isokepn++;
+						}
+						if (8 > isokmps) {
+							okmps[isokmps] = \
+							le16_to_cpu(pepd->\
+							wMaxPacketSize);
+							JOT(4,\
+							"%i=okmps[%i]\n",\
+							okmps[isokmps], \
+							isokmps);
+							isokmps++;
+						}
+					} else {
+						if (-1 == peasycap->\
+							audio_altsetting_off) {
+							peasycap->\
+							audio_altsetting_off =\
+									 i;
+							JOT(4, "%i=audio_" \
+							"altsetting_off " \
+							"<====\n", \
+							peasycap->\
+							audio_altsetting_off);
+						} else {
+							SAY("ERROR: peasycap" \
+							"->audio_altsetting_" \
+							"off already set\n");
+							SAY("...... " \
+							"continuing with " \
+							"%i=peasycap->\
+							audio_altsetting_" \
+							"off\n",
+							peasycap->\
+							audio_altsetting_off);
+						}
+					}
+				break;
+				}
+				default:
+					break;
+				}
+			}
+		} else if ((pepd->bmAttributes & \
+						USB_ENDPOINT_XFERTYPE_MASK) ==\
+						USB_ENDPOINT_XFER_BULK) {
+			JOT(4, "intf[%i]alt[%i]end[%i] is a  BULK endpoint\n",\
+						bInterfaceNumber, i, j);
+		} else if ((pepd->bmAttributes & \
+						USB_ENDPOINT_XFERTYPE_MASK) ==\
+						USB_ENDPOINT_XFER_INT) {
+			JOT(4, "intf[%i]alt[%i]end[%i] is an  INT endpoint\n",\
+						bInterfaceNumber, i, j);
+		} else {
+			JOT(4, "intf[%i]alt[%i]end[%i] is a  CTRL endpoint\n",\
+						bInterfaceNumber, i, j);
+		}
+		if (0 == pepd->wMaxPacketSize) {
+			JOT(4, "intf[%i]alt[%i]end[%i] " \
+						"has zero packet size\n", \
+						bInterfaceNumber, i, j);
+		}
+	}
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  PERFORM INITIALIZATION OF THE PROBED INTERFACE
+ */
+/*---------------------------------------------------------------------------*/
+JOT(4, "initialization begins for interface %i\n", \
+				pusb_interface_descriptor->bInterfaceNumber);
+switch (bInterfaceNumber) {
+/*---------------------------------------------------------------------------*/
+/*
+ *  INTERFACE 0 IS THE VIDEO INTERFACE
+ */
+/*---------------------------------------------------------------------------*/
+case 0: {
+	if (!peasycap) {
+		SAY("MISTAKE: peasycap is NULL\n");
+		return -EFAULT;
+	}
+	if (!isokalt) {
+		SAY("ERROR:  no viable video_altsetting_on\n");
+		return -ENOENT;
+	} else {
+		peasycap->video_altsetting_on = okalt[isokalt - 1];
+		JOT(4, "%i=video_altsetting_on <====\n", \
+					peasycap->video_altsetting_on);
+	}
+	if (!isokepn) {
+		SAY("ERROR:  no viable video_endpointnumber\n");
+		return -ENOENT;
+	} else {
+		peasycap->video_endpointnumber = okepn[isokepn - 1];
+		JOT(4, "%i=video_endpointnumber\n", \
+					peasycap->video_endpointnumber);
+		}
+	if (!isokmps) {
+		SAY("ERROR:  no viable video_maxpacketsize\n");
+		return -ENOENT;
+/*---------------------------------------------------------------------------*/
+/*
+ *  DECIDE THE VIDEO STREAMING PARAMETERS
+ */
+/*---------------------------------------------------------------------------*/
+	} else {
+		maxpacketsize = okmps[isokmps - 1] - 1024;
+		if (USB_2_0_MAXPACKETSIZE > maxpacketsize) {
+			peasycap->video_isoc_maxframesize = maxpacketsize;
+		} else {
+			peasycap->video_isoc_maxframesize = \
+							USB_2_0_MAXPACKETSIZE;
+		}
+		JOT(4, "%i=video_isoc_maxframesize\n", \
+					peasycap->video_isoc_maxframesize);
+		if (0 >= peasycap->video_isoc_maxframesize) {
+			SAY("ERROR:  bad video_isoc_maxframesize\n");
+			return -ENOENT;
+		}
+		peasycap->video_isoc_framesperdesc = VIDEO_ISOC_FRAMESPERDESC;
+		JOT(4, "%i=video_isoc_framesperdesc\n", \
+					peasycap->video_isoc_framesperdesc);
+		if (0 >= peasycap->video_isoc_framesperdesc) {
+			SAY("ERROR:  bad video_isoc_framesperdesc\n");
+			return -ENOENT;
+		}
+		peasycap->video_isoc_buffer_size = \
+					peasycap->video_isoc_maxframesize * \
+					peasycap->video_isoc_framesperdesc;
+		JOT(4, "%i=video_isoc_buffer_size\n", \
+					peasycap->video_isoc_buffer_size);
+		if ((PAGE_SIZE << VIDEO_ISOC_ORDER) < \
+					peasycap->video_isoc_buffer_size) {
+			SAY("MISTAKE: " \
+				"peasycap->video_isoc_buffer_size too big\n");
+			return -EFAULT;
+		}
+	}
+/*---------------------------------------------------------------------------*/
+	if (-1 == peasycap->video_interface) {
+		SAY("MISTAKE:  video_interface is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->video_altsetting_on) {
+		SAY("MISTAKE:  video_altsetting_on is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->video_altsetting_off) {
+		SAY("MISTAKE:  video_interface_off is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->video_endpointnumber) {
+		SAY("MISTAKE:  video_endpointnumber is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->video_isoc_maxframesize) {
+		SAY("MISTAKE:  video_isoc_maxframesize is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->video_isoc_buffer_size) {
+		SAY("MISTAKE:  video_isoc_buffer_size is unset\n");
+		return -EFAULT;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  ALLOCATE MEMORY FOR VIDEO BUFFERS.  LISTS MUST BE INITIALIZED FIRST.
+ */
+/*---------------------------------------------------------------------------*/
+	INIT_LIST_HEAD(&(peasycap->urb_video_head));
+	peasycap->purb_video_head = &(peasycap->urb_video_head);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i frame buffers of size %li\n",  \
+			FRAME_BUFFER_MANY, (long int)FRAME_BUFFER_SIZE);
+	JOT(4, ".... each scattered over %li pages\n", \
+						FRAME_BUFFER_SIZE/PAGE_SIZE);
+
+	for (k = 0;  k < FRAME_BUFFER_MANY;  k++) {
+		for (m = 0;  m < FRAME_BUFFER_SIZE/PAGE_SIZE;  m++) {
+			if ((void *)NULL != peasycap->frame_buffer[k][m].pgo)
+				SAY("attempting to reallocate frame " \
+								" buffers\n");
+			else {
+				pbuf = (void *)__get_free_page(GFP_KERNEL);
+				if ((void *)NULL == pbuf) {
+					SAY("ERROR: Could not allocate frame "\
+						"buffer %i page %i\n", k, m);
+					return -ENOMEM;
+				} else
+					peasycap->allocation_video_page += 1;
+				peasycap->frame_buffer[k][m].pgo = pbuf;
+			}
+			peasycap->frame_buffer[k][m].pto = \
+					peasycap->frame_buffer[k][m].pgo;
+		}
+	}
+
+	peasycap->frame_fill = 0;
+	peasycap->frame_read = 0;
+	JOT(4, "allocation of frame buffers done:  %i pages\n", k * \
+								m);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i field buffers of size %li\n",  \
+			FIELD_BUFFER_MANY, (long int)FIELD_BUFFER_SIZE);
+	JOT(4, ".... each scattered over %li pages\n", \
+					FIELD_BUFFER_SIZE/PAGE_SIZE);
+
+	for (k = 0;  k < FIELD_BUFFER_MANY;  k++) {
+		for (m = 0;  m < FIELD_BUFFER_SIZE/PAGE_SIZE;  m++) {
+			if ((void *)NULL != peasycap->field_buffer[k][m].pgo) {
+				SAY("ERROR: attempting to reallocate " \
+							"field buffers\n");
+			} else {
+				pbuf = (void *) __get_free_page(GFP_KERNEL);
+				if ((void *)NULL == pbuf) {
+					SAY("ERROR: Could not allocate field" \
+						" buffer %i page %i\n", k, m);
+					return -ENOMEM;
+					}
+				else
+					peasycap->allocation_video_page += 1;
+				peasycap->field_buffer[k][m].pgo = pbuf;
+				}
+			peasycap->field_buffer[k][m].pto = \
+					peasycap->field_buffer[k][m].pgo;
+		}
+		peasycap->field_buffer[k][0].kount = 0x0200;
+	}
+	peasycap->field_fill = 0;
+	peasycap->field_page = 0;
+	peasycap->field_read = 0;
+	JOT(4, "allocation of field buffers done:  %i pages\n", k * \
+								m);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i isoc video buffers of size %i\n",  \
+					VIDEO_ISOC_BUFFER_MANY, \
+					peasycap->video_isoc_buffer_size);
+	JOT(4, ".... each occupying contiguous memory pages\n");
+
+	for (k = 0;  k < VIDEO_ISOC_BUFFER_MANY; k++) {
+		pbuf = (void *)__get_free_pages(GFP_KERNEL, VIDEO_ISOC_ORDER);
+		if (NULL == pbuf) {
+			SAY("ERROR: Could not allocate isoc video buffer " \
+								"%i\n", k);
+			return -ENOMEM;
+		} else
+			peasycap->allocation_video_page += \
+				((unsigned int)(0x01 << VIDEO_ISOC_ORDER));
+
+		peasycap->video_isoc_buffer[k].pgo = pbuf;
+		peasycap->video_isoc_buffer[k].pto = pbuf + \
+					peasycap->video_isoc_buffer_size;
+		peasycap->video_isoc_buffer[k].kount = k;
+	}
+	JOT(4, "allocation of isoc video buffers done: %i pages\n", \
+					k * (0x01 << VIDEO_ISOC_ORDER));
+/*---------------------------------------------------------------------------*/
+/*
+ *  ALLOCATE AND INITIALIZE MULTIPLE struct urb ...
+ */
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i struct urb.\n", VIDEO_ISOC_BUFFER_MANY);
+	JOT(4, "using %i=peasycap->video_isoc_framesperdesc\n", \
+					peasycap->video_isoc_framesperdesc);
+	JOT(4, "using %i=peasycap->video_isoc_maxframesize\n", \
+					peasycap->video_isoc_maxframesize);
+	JOT(4, "using %i=peasycap->video_isoc_buffer_sizen", \
+					peasycap->video_isoc_buffer_size);
+
+	for (k = 0;  k < VIDEO_ISOC_BUFFER_MANY; k++) {
+		purb = usb_alloc_urb(peasycap->video_isoc_framesperdesc, \
+								GFP_KERNEL);
+		if (NULL == purb) {
+			SAY("ERROR: usb_alloc_urb returned NULL for buffer " \
+								"%i\n", k);
+			return -ENOMEM;
+		} else
+			peasycap->allocation_video_urb += 1;
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+		pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL);
+		if (NULL == pdata_urb) {
+			SAY("ERROR: Could not allocate struct data_urb.\n");
+			return -ENOMEM;
+		} else
+			peasycap->allocation_video_struct += \
+						sizeof(struct data_urb);
+
+		pdata_urb->purb = purb;
+		pdata_urb->isbuf = k;
+		pdata_urb->length = 0;
+		list_add_tail(&(pdata_urb->list_head), \
+						peasycap->purb_video_head);
+/*---------------------------------------------------------------------------*/
+/*
+ *  ... AND INITIALIZE THEM
+ */
+/*---------------------------------------------------------------------------*/
+		if (!k) {
+			JOT(4, "initializing video urbs thus:\n");
+			JOT(4, "  purb->interval = 1;\n");
+			JOT(4, "  purb->dev = peasycap->pusb_device;\n");
+			JOT(4, "  purb->pipe = usb_rcvisocpipe" \
+					"(peasycap->pusb_device,%i);\n", \
+					peasycap->video_endpointnumber);
+			JOT(4, "  purb->transfer_flags = URB_ISO_ASAP;\n");
+			JOT(4, "  purb->transfer_buffer = peasycap->" \
+					"video_isoc_buffer[.].pgo;\n");
+			JOT(4, "  purb->transfer_buffer_length = %i;\n", \
+					peasycap->video_isoc_buffer_size);
+			JOT(4, "  purb->complete = easycap_complete;\n");
+			JOT(4, "  purb->context = peasycap;\n");
+			JOT(4, "  purb->start_frame = 0;\n");
+			JOT(4, "  purb->number_of_packets = %i;\n", \
+					peasycap->video_isoc_framesperdesc);
+			JOT(4, "  for (j = 0; j < %i; j++)\n", \
+					peasycap->video_isoc_framesperdesc);
+			JOT(4, "    {\n");
+			JOT(4, "    purb->iso_frame_desc[j].offset = j*%i;\n",\
+					peasycap->video_isoc_maxframesize);
+			JOT(4, "    purb->iso_frame_desc[j].length = %i;\n", \
+					peasycap->video_isoc_maxframesize);
+			JOT(4, "    }\n");
+		}
+
+		purb->interval = 1;
+		purb->dev = peasycap->pusb_device;
+		purb->pipe = usb_rcvisocpipe(peasycap->pusb_device, \
+					peasycap->video_endpointnumber);
+		purb->transfer_flags = URB_ISO_ASAP;
+		purb->transfer_buffer = peasycap->video_isoc_buffer[k].pgo;
+		purb->transfer_buffer_length = \
+					peasycap->video_isoc_buffer_size;
+		purb->complete = easycap_complete;
+		purb->context = peasycap;
+		purb->start_frame = 0;
+		purb->number_of_packets = peasycap->video_isoc_framesperdesc;
+		for (j = 0;  j < peasycap->video_isoc_framesperdesc; j++) {
+			purb->iso_frame_desc[j].offset = j * \
+					peasycap->video_isoc_maxframesize;
+			purb->iso_frame_desc[j].length = \
+					peasycap->video_isoc_maxframesize;
+		}
+	}
+	JOT(4, "allocation of %i struct urb done.\n", k);
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAVE POINTER peasycap IN THIS INTERFACE.
+ */
+/*--------------------------------------------------------------------------*/
+	usb_set_intfdata(pusb_interface, peasycap);
+/*--------------------------------------------------------------------------*/
+/*
+ *  THE VIDEO DEVICE CAN BE REGISTERED NOW, AS IT IS READY.
+ */
+/*--------------------------------------------------------------------------*/
+#if (!defined(EASYCAP_IS_VIDEODEV_CLIENT))
+	if (0 != (usb_register_dev(pusb_interface, &easycap_class))) {
+		err("Not able to get a minor for this device");
+		usb_set_intfdata(pusb_interface, NULL);
+		return -ENODEV;
+	} else
+		(peasycap->registered_video)++;
+	SAY("easycap attached to minor #%d\n", pusb_interface->minor);
+	break;
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#else
+	pvideo_device = (struct video_device *)\
+			kzalloc(sizeof(struct video_device), GFP_KERNEL);
+	if ((struct video_device *)NULL == pvideo_device) {
+		SAY("ERROR: Could not allocate structure video_device\n");
+		return -ENOMEM;
+	}
+	if (VIDEO_DEVICE_MANY <= video_device_many) {
+		SAY("ERROR: Too many /dev/videos\n");
+		return -ENOMEM;
+	}
+	pvideo_array[video_device_many] = pvideo_device;  video_device_many++;
+
+	strcpy(&pvideo_device->name[0], "easycapdc60");
+#if defined(EASYCAP_NEEDS_V4L2_FOPS)
+	pvideo_device->fops = &v4l2_fops;
+#else
+	pvideo_device->fops = &easycap_fops;
+#endif /*EASYCAP_NEEDS_V4L2_FOPS*/
+	pvideo_device->minor = -1;
+	pvideo_device->release = (void *)(&videodev_release);
+
+	video_set_drvdata(pvideo_device, (void *)peasycap);
+
+	rc = video_register_device(pvideo_device, VFL_TYPE_GRABBER, -1);
+	if (0 != rc) {
+		err("Not able to register with videodev");
+		videodev_release(pvideo_device);
+		return -ENODEV;
+	} else {
+		peasycap->pvideo_device = pvideo_device;
+		(peasycap->registered_video)++;
+		JOT(4, "registered with videodev: %i=minor\n", \
+							pvideo_device->minor);
+	}
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+	break;
+}
+/*--------------------------------------------------------------------------*/
+/*
+ *  INTERFACE 1 IS THE AUDIO CONTROL INTERFACE
+ *  INTERFACE 2 IS THE AUDIO STREAMING INTERFACE
+ */
+/*--------------------------------------------------------------------------*/
+case 1: {
+/*--------------------------------------------------------------------------*/
+/*
+ *  SAVE POINTER peasycap IN INTERFACE 1
+ */
+/*--------------------------------------------------------------------------*/
+	usb_set_intfdata(pusb_interface, peasycap);
+	JOT(4, "no initialization required for interface %i\n", \
+				pusb_interface_descriptor->bInterfaceNumber);
+	break;
+}
+/*--------------------------------------------------------------------------*/
+case 2: {
+	if (!peasycap) {
+		SAY("MISTAKE: peasycap is NULL\n");
+		return -EFAULT;
+	}
+	if (!isokalt) {
+		SAY("ERROR:  no viable audio_altsetting_on\n");
+		return -ENOENT;
+	} else {
+		peasycap->audio_altsetting_on = okalt[isokalt - 1];
+		JOT(4, "%i=audio_altsetting_on <====\n", \
+						peasycap->audio_altsetting_on);
+	}
+	if (!isokepn) {
+		SAY("ERROR:  no viable audio_endpointnumber\n");
+		return -ENOENT;
+	} else {
+		peasycap->audio_endpointnumber = okepn[isokepn - 1];
+		JOT(4, "%i=audio_endpointnumber\n", \
+					peasycap->audio_endpointnumber);
+	}
+	if (!isokmps) {
+		SAY("ERROR:  no viable audio_maxpacketsize\n");
+		return -ENOENT;
+	} else {
+		peasycap->audio_isoc_maxframesize = okmps[isokmps - 1];
+		JOT(4, "%i=audio_isoc_maxframesize\n", \
+					peasycap->audio_isoc_maxframesize);
+		if (0 >= peasycap->audio_isoc_maxframesize) {
+			SAY("ERROR:  bad audio_isoc_maxframesize\n");
+			return -ENOENT;
+		}
+		if (9 == peasycap->audio_isoc_maxframesize) {
+			peasycap->ilk |= 0x02;
+			SAY("hardware is FOUR-CVBS\n");
+			peasycap->microphone = true;
+			peasycap->audio_pages_per_fragment = 4;
+		} else if (256 == peasycap->audio_isoc_maxframesize) {
+			peasycap->ilk &= ~0x02;
+			SAY("hardware is CVBS+S-VIDEO\n");
+			peasycap->microphone = false;
+			peasycap->audio_pages_per_fragment = 4;
+		} else {
+			SAY("hardware is unidentified:\n");
+			SAY("%i=audio_isoc_maxframesize\n", \
+					peasycap->audio_isoc_maxframesize);
+			return -ENOENT;
+		}
+
+		peasycap->audio_bytes_per_fragment = \
+					peasycap->audio_pages_per_fragment * \
+								PAGE_SIZE ;
+		peasycap->audio_buffer_page_many = (AUDIO_FRAGMENT_MANY * \
+					peasycap->audio_pages_per_fragment);
+
+		JOT(4, "%6i=AUDIO_FRAGMENT_MANY\n", AUDIO_FRAGMENT_MANY);
+		JOT(4, "%6i=audio_pages_per_fragment\n", \
+					peasycap->audio_pages_per_fragment);
+		JOT(4, "%6i=audio_bytes_per_fragment\n", \
+					peasycap->audio_bytes_per_fragment);
+		JOT(4, "%6i=audio_buffer_page_many\n", \
+					peasycap->audio_buffer_page_many);
+
+		peasycap->audio_isoc_framesperdesc = 128;
+
+		JOT(4, "%i=audio_isoc_framesperdesc\n", \
+					peasycap->audio_isoc_framesperdesc);
+		if (0 >= peasycap->audio_isoc_framesperdesc) {
+			SAY("ERROR:  bad audio_isoc_framesperdesc\n");
+			return -ENOENT;
+		}
+
+		peasycap->audio_isoc_buffer_size = \
+				peasycap->audio_isoc_maxframesize * \
+				peasycap->audio_isoc_framesperdesc;
+		JOT(4, "%i=audio_isoc_buffer_size\n", \
+					peasycap->audio_isoc_buffer_size);
+		if (AUDIO_ISOC_BUFFER_SIZE < \
+					peasycap->audio_isoc_buffer_size) {
+			SAY("MISTAKE:  audio_isoc_buffer_size bigger "
+			"than %li=AUDIO_ISOC_BUFFER_SIZE\n", \
+						AUDIO_ISOC_BUFFER_SIZE);
+			return -EFAULT;
+		}
+	}
+
+	if (-1 == peasycap->audio_interface) {
+		SAY("MISTAKE:  audio_interface is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->audio_altsetting_on) {
+		SAY("MISTAKE:  audio_altsetting_on is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->audio_altsetting_off) {
+		SAY("MISTAKE:  audio_interface_off is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->audio_endpointnumber) {
+		SAY("MISTAKE:  audio_endpointnumber is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->audio_isoc_maxframesize) {
+		SAY("MISTAKE:  audio_isoc_maxframesize is unset\n");
+		return -EFAULT;
+	}
+	if (-1 == peasycap->audio_isoc_buffer_size) {
+		SAY("MISTAKE:  audio_isoc_buffer_size is unset\n");
+		return -EFAULT;
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  ALLOCATE MEMORY FOR AUDIO BUFFERS.  LISTS MUST BE INITIALIZED FIRST.
+ */
+/*---------------------------------------------------------------------------*/
+	INIT_LIST_HEAD(&(peasycap->urb_audio_head));
+	peasycap->purb_audio_head = &(peasycap->urb_audio_head);
+
+	JOT(4, "allocating an audio buffer\n");
+	JOT(4, ".... scattered over %i pages\n", \
+					peasycap->audio_buffer_page_many);
+
+	for (k = 0;  k < peasycap->audio_buffer_page_many;  k++) {
+		if ((void *)NULL != peasycap->audio_buffer[k].pgo) {
+			SAY("ERROR: attempting to reallocate audio buffers\n");
+		} else {
+			pbuf = (void *) __get_free_page(GFP_KERNEL);
+			if ((void *)NULL == pbuf) {
+				SAY("ERROR: Could not allocate audio " \
+							"buffer page %i\n", k);
+				return -ENOMEM;
+			} else
+				peasycap->allocation_audio_page += 1;
+
+			peasycap->audio_buffer[k].pgo = pbuf;
+		}
+		peasycap->audio_buffer[k].pto = peasycap->audio_buffer[k].pgo;
+	}
+
+	peasycap->audio_fill = 0;
+	peasycap->audio_read = 0;
+	JOT(4, "allocation of audio buffer done:  %i pages\n", k);
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i isoc audio buffers of size %i\n",  \
+		AUDIO_ISOC_BUFFER_MANY, peasycap->audio_isoc_buffer_size);
+	JOT(4, ".... each occupying contiguous memory pages\n");
+
+	for (k = 0;  k < AUDIO_ISOC_BUFFER_MANY;  k++) {
+		pbuf = (void *)__get_free_pages(GFP_KERNEL, AUDIO_ISOC_ORDER);
+		if (NULL == pbuf) {
+			SAY("ERROR: Could not allocate isoc audio buffer " \
+							"%i\n", k);
+			return -ENOMEM;
+		} else
+			peasycap->allocation_audio_page += \
+				((unsigned int)(0x01 << AUDIO_ISOC_ORDER));
+
+		peasycap->audio_isoc_buffer[k].pgo = pbuf;
+		peasycap->audio_isoc_buffer[k].pto = pbuf + \
+		peasycap->audio_isoc_buffer_size;
+		peasycap->audio_isoc_buffer[k].kount = k;
+	}
+	JOT(4, "allocation of isoc audio buffers done.\n");
+/*---------------------------------------------------------------------------*/
+/*
+ *  ALLOCATE AND INITIALIZE MULTIPLE struct urb ...
+ */
+/*---------------------------------------------------------------------------*/
+	JOT(4, "allocating %i struct urb.\n", AUDIO_ISOC_BUFFER_MANY);
+	JOT(4, "using %i=peasycap->audio_isoc_framesperdesc\n", \
+					peasycap->audio_isoc_framesperdesc);
+	JOT(4, "using %i=peasycap->audio_isoc_maxframesize\n", \
+					peasycap->audio_isoc_maxframesize);
+	JOT(4, "using %i=peasycap->audio_isoc_buffer_size\n", \
+					peasycap->audio_isoc_buffer_size);
+
+	for (k = 0;  k < AUDIO_ISOC_BUFFER_MANY; k++) {
+		purb = usb_alloc_urb(peasycap->audio_isoc_framesperdesc, \
+								GFP_KERNEL);
+		if (NULL == purb) {
+			SAY("ERROR: usb_alloc_urb returned NULL for buffer " \
+							"%i\n", k);
+			return -ENOMEM;
+		} else
+			peasycap->allocation_audio_urb += 1 ;
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+		pdata_urb = kzalloc(sizeof(struct data_urb), GFP_KERNEL);
+		if (NULL == pdata_urb) {
+			SAY("ERROR: Could not allocate struct data_urb.\n");
+			return -ENOMEM;
+		} else
+			peasycap->allocation_audio_struct += \
+						sizeof(struct data_urb);
+
+		pdata_urb->purb = purb;
+		pdata_urb->isbuf = k;
+		pdata_urb->length = 0;
+		list_add_tail(&(pdata_urb->list_head), \
+						peasycap->purb_audio_head);
+/*---------------------------------------------------------------------------*/
+/*
+ *  ... AND INITIALIZE THEM
+ */
+/*---------------------------------------------------------------------------*/
+		if (!k) {
+			JOT(4, "initializing audio urbs thus:\n");
+			JOT(4, "  purb->interval = 1;\n");
+			JOT(4, "  purb->dev = peasycap->pusb_device;\n");
+			JOT(4, "  purb->pipe = usb_rcvisocpipe(peasycap->" \
+					"pusb_device,%i);\n", \
+					peasycap->audio_endpointnumber);
+			JOT(4, "  purb->transfer_flags = URB_ISO_ASAP;\n");
+			JOT(4, "  purb->transfer_buffer = " \
+				"peasycap->audio_isoc_buffer[.].pgo;\n");
+			JOT(4, "  purb->transfer_buffer_length = %i;\n", \
+					peasycap->audio_isoc_buffer_size);
+			JOT(4, "  purb->complete = easysnd_complete;\n");
+			JOT(4, "  purb->context = peasycap;\n");
+			JOT(4, "  purb->start_frame = 0;\n");
+			JOT(4, "  purb->number_of_packets = %i;\n", \
+					peasycap->audio_isoc_framesperdesc);
+			JOT(4, "  for (j = 0; j < %i; j++)\n", \
+					peasycap->audio_isoc_framesperdesc);
+			JOT(4, "    {\n");
+			JOT(4, "    purb->iso_frame_desc[j].offset = j*%i;\n",\
+					peasycap->audio_isoc_maxframesize);
+			JOT(4, "    purb->iso_frame_desc[j].length = %i;\n", \
+					peasycap->audio_isoc_maxframesize);
+			JOT(4, "    }\n");
+			}
+
+		purb->interval = 1;
+		purb->dev = peasycap->pusb_device;
+		purb->pipe = usb_rcvisocpipe(peasycap->pusb_device, \
+					peasycap->audio_endpointnumber);
+		purb->transfer_flags = URB_ISO_ASAP;
+		purb->transfer_buffer = peasycap->audio_isoc_buffer[k].pgo;
+		purb->transfer_buffer_length = \
+					peasycap->audio_isoc_buffer_size;
+		purb->complete = easysnd_complete;
+		purb->context = peasycap;
+		purb->start_frame = 0;
+		purb->number_of_packets = peasycap->audio_isoc_framesperdesc;
+		for (j = 0;  j < peasycap->audio_isoc_framesperdesc; j++) {
+			purb->iso_frame_desc[j].offset = j * \
+					peasycap->audio_isoc_maxframesize;
+			purb->iso_frame_desc[j].length = \
+					peasycap->audio_isoc_maxframesize;
+		}
+	}
+	JOT(4, "allocation of %i struct urb done.\n", k);
+/*---------------------------------------------------------------------------*/
+/*
+ *  SAVE POINTER peasycap IN THIS INTERFACE.
+ */
+/*---------------------------------------------------------------------------*/
+	usb_set_intfdata(pusb_interface, peasycap);
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE AUDIO DEVICE CAN BE REGISTERED NOW, AS IT IS READY.
+ */
+/*---------------------------------------------------------------------------*/
+	rc = usb_register_dev(pusb_interface, &easysnd_class);
+	if (0 != rc) {
+		err("Not able to get a minor for this device.");
+		usb_set_intfdata(pusb_interface, NULL);
+		return -ENODEV;
+	} else
+		(peasycap->registered_audio)++;
+/*---------------------------------------------------------------------------*/
+/*
+ *  LET THE USER KNOW WHAT NODE THE AUDIO DEVICE IS ATTACHED TO.
+ */
+/*---------------------------------------------------------------------------*/
+	SAY("easysnd attached to minor #%d\n", pusb_interface->minor);
+	break;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  INTERFACES OTHER THAN 0, 1 AND 2 ARE UNEXPECTED
+ */
+/*---------------------------------------------------------------------------*/
+default: {
+	JOT(4, "ERROR: unexpected interface %i\n", bInterfaceNumber);
+	return -EINVAL;
+}
+}
+JOT(4, "ends successfully for interface %i\n", \
+				pusb_interface_descriptor->bInterfaceNumber);
+return 0;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  WHEN THIS FUNCTION IS CALLED THE DEVICE HAS ALREADY BEEN PHYSICALLY
+ *  UNPLUGGED.
+ *  HENCE peasycap->pusb_device IS NO LONGER VALID AND MUST BE SET TO NULL.
+ */
+/*---------------------------------------------------------------------------*/
+void
+easycap_usb_disconnect(struct usb_interface *pusb_interface)
+{
+struct usb_host_interface *pusb_host_interface;
+struct usb_interface_descriptor *pusb_interface_descriptor;
+__u8 bInterfaceNumber;
+struct easycap *peasycap;
+
+struct list_head *plist_head;
+struct data_urb *pdata_urb;
+int minor, m;
+
+JOT(4, "\n");
+
+if ((struct usb_interface *)NULL == pusb_interface) {
+	JOT(4, "ERROR: pusb_interface is NULL\n");
+	return;
+}
+pusb_host_interface = pusb_interface->cur_altsetting;
+if ((struct usb_host_interface *)NULL == pusb_host_interface) {
+	JOT(4, "ERROR: pusb_host_interface is NULL\n");
+	return;
+}
+pusb_interface_descriptor = &(pusb_host_interface->desc);
+if ((struct usb_interface_descriptor *)NULL == pusb_interface_descriptor) {
+	JOT(4, "ERROR: pusb_interface_descriptor is NULL\n");
+	return;
+}
+bInterfaceNumber = pusb_interface_descriptor->bInterfaceNumber;
+minor = pusb_interface->minor;
+JOT(4, "intf[%i]: minor=%i\n", bInterfaceNumber, minor);
+
+peasycap = usb_get_intfdata(pusb_interface);
+if ((struct easycap *)NULL == peasycap)
+	SAY("ERROR: peasycap is NULL\n");
+else {
+	peasycap->pusb_device = (struct usb_device *)NULL;
+	switch (bInterfaceNumber) {
+/*---------------------------------------------------------------------------*/
+	case 0: {
+		if ((struct list_head *)NULL != peasycap->purb_video_head) {
+			JOT(4, "killing video urbs\n");
+			m = 0;
+			list_for_each(plist_head, (peasycap->purb_video_head))
+				{
+				pdata_urb = list_entry(plist_head, \
+						struct data_urb, list_head);
+				if ((struct data_urb *)NULL != pdata_urb) {
+					if ((struct urb *)NULL != \
+							pdata_urb->purb) {
+						usb_kill_urb(pdata_urb->purb);
+						m++;
+					}
+				}
+			}
+			JOT(4, "%i video urbs killed\n", m);
+		} else
+			SAY("ERROR: peasycap->purb_video_head is NULL\n");
+		break;
+	}
+/*---------------------------------------------------------------------------*/
+	case 2: {
+		if ((struct list_head *)NULL != peasycap->purb_audio_head) {
+			JOT(4, "killing audio urbs\n");
+			m = 0;
+			list_for_each(plist_head, \
+						(peasycap->purb_audio_head)) {
+				pdata_urb = list_entry(plist_head, \
+						struct data_urb, list_head);
+				if ((struct data_urb *)NULL != pdata_urb) {
+					if ((struct urb *)NULL != \
+							pdata_urb->purb) {
+						usb_kill_urb(pdata_urb->purb);
+						m++;
+					}
+				}
+			}
+			JOT(4, "%i audio urbs killed\n", m);
+		} else
+			SAY("ERROR: peasycap->purb_audio_head is NULL\n");
+		break;
+	}
+/*---------------------------------------------------------------------------*/
+	default:
+		break;
+	}
+}
+/*--------------------------------------------------------------------------*/
+/*
+ *  DEREGISTER
+ */
+/*--------------------------------------------------------------------------*/
+switch (bInterfaceNumber) {
+case 0: {
+#if (!defined(EASYCAP_IS_VIDEODEV_CLIENT))
+	if ((struct easycap *)NULL == peasycap) {
+		SAY("ERROR: peasycap has become NULL\n");
+	} else {
+		lock_kernel();
+		usb_deregister_dev(pusb_interface, &easycap_class);
+		(peasycap->registered_video)--;
+
+		JOT(4, "intf[%i]: usb_deregister_dev()\n", bInterfaceNumber);
+		unlock_kernel();
+		SAY("easycap detached from minor #%d\n", minor);
+	}
+/*vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv*/
+#else
+	if ((struct easycap *)NULL == peasycap)
+		SAY("ERROR: peasycap has become NULL\n");
+	else {
+		lock_kernel();
+		video_unregister_device(peasycap->pvideo_device);
+		(peasycap->registered_video)--;
+		unlock_kernel();
+		JOT(4, "unregistered with videodev: %i=minor\n", \
+							pvideo_device->minor);
+	}
+/*^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^*/
+#endif /*EASYCAP_IS_VIDEODEV_CLIENT*/
+	break;
+}
+case 2: {
+	lock_kernel();
+
+	usb_deregister_dev(pusb_interface, &easysnd_class);
+	if ((struct easycap *)NULL != peasycap)
+		(peasycap->registered_audio)--;
+
+	JOT(4, "intf[%i]: usb_deregister_dev()\n", bInterfaceNumber);
+	unlock_kernel();
+
+	SAY("easysnd detached from minor #%d\n", minor);
+	break;
+}
+default:
+	break;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  CALL easycap_delete() IF NO REMAINING REFERENCES TO peasycap
+ */
+/*---------------------------------------------------------------------------*/
+if ((struct easycap *)NULL == peasycap) {
+	SAY("ERROR: peasycap has become NULL\n");
+	SAY("cannot call kref_put()\n");
+	SAY("ending unsuccessfully: may cause memory leak\n");
+	return;
+}
+if (!peasycap->kref.refcount.counter) {
+	SAY("ERROR: peasycap->kref.refcount.counter is zero " \
+						"so cannot call kref_put()\n");
+	SAY("ending unsuccessfully: may cause memory leak\n");
+	return;
+}
+JOT(4, "intf[%i]: kref_put() with %i=peasycap->kref.refcount.counter\n", \
+		bInterfaceNumber, (int)peasycap->kref.refcount.counter);
+kref_put(&peasycap->kref, easycap_delete);
+JOT(4, "intf[%i]: kref_put() done.\n", bInterfaceNumber);
+/*---------------------------------------------------------------------------*/
+
+JOT(4, "ends\n");
+return;
+}
+/*****************************************************************************/
+int __init
+easycap_module_init(void)
+{
+int result;
+
+SAY("========easycap=======\n");
+JOT(4, "begins.  %i=debug\n", easycap_debug);
+SAY("version: " EASYCAP_DRIVER_VERSION "\n");
+/*---------------------------------------------------------------------------*/
+/*
+ *  REGISTER THIS DRIVER WITH THE USB SUBSYTEM.
+ */
+/*---------------------------------------------------------------------------*/
+JOT(4, "registering driver easycap\n");
+
+result = usb_register(&easycap_usb_driver);
+if (0 != result)
+	SAY("ERROR:  usb_register returned %i\n", result);
+
+JOT(4, "ends\n");
+return result;
+}
+/*****************************************************************************/
+void __exit
+easycap_module_exit(void)
+{
+JOT(4, "begins\n");
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  DEREGISTER THIS DRIVER WITH THE USB SUBSYTEM.
+ */
+/*---------------------------------------------------------------------------*/
+usb_deregister(&easycap_usb_driver);
+
+JOT(4, "ends\n");
+}
+/*****************************************************************************/
+
+module_init(easycap_module_init);
+module_exit(easycap_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("R.M. Thomas <rmthomas@sciolus.org>");
+MODULE_DESCRIPTION(EASYCAP_DRIVER_DESCRIPTION);
+MODULE_VERSION(EASYCAP_DRIVER_VERSION);
+#if defined(EASYCAP_DEBUG)
+MODULE_PARM_DESC(easycap_debug, "debug: 0 (default), 1, 2,...");
+#endif /*EASYCAP_DEBUG*/
+/*****************************************************************************/
diff --git a/drivers/staging/easycap/easycap_settings.c b/drivers/staging/easycap/easycap_settings.c
new file mode 100644
index 00000000000..38d94051241
--- /dev/null
+++ b/drivers/staging/easycap/easycap_settings.c
@@ -0,0 +1,489 @@
+/******************************************************************************
+*                                                                             *
+*  easycap_settings.c                                                         *
+*                                                                             *
+******************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+
+#include "easycap.h"
+#include "easycap_debug.h"
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE LEAST SIGNIFICANT BIT OF easycap_standard.mask HAS MEANING:
+ *                         0 => 25 fps
+ *                         1 => 30 fps
+ */
+/*---------------------------------------------------------------------------*/
+const struct easycap_standard easycap_standard[] = {
+{
+.mask = 0x000F & PAL_BGHIN ,
+.v4l2_standard = {
+	.index = PAL_BGHIN,
+	.id = (V4L2_STD_PAL_B | V4L2_STD_PAL_G | V4L2_STD_PAL_H | \
+					V4L2_STD_PAL_I | V4L2_STD_PAL_N),
+	.name = "PAL_BGHIN",
+	.frameperiod = {1, 25},
+	.framelines = 625,
+	.reserved = {0, 0, 0, 0}
+	}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & NTSC_N_443 ,
+.v4l2_standard = {
+	.index = NTSC_N_443,
+	.id = V4L2_STD_UNKNOWN,
+	.name = "NTSC_N_443",
+	.frameperiod = {1, 25},
+	.framelines = 480,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & PAL_Nc ,
+.v4l2_standard = {
+	.index = PAL_Nc,
+	.id = V4L2_STD_PAL_Nc,
+	.name = "PAL_Nc",
+	.frameperiod = {1, 25},
+	.framelines = 625,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & NTSC_N ,
+.v4l2_standard = {
+	.index = NTSC_N,
+	.id = V4L2_STD_UNKNOWN,
+	.name = "NTSC_N",
+	.frameperiod = {1, 25},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & SECAM ,
+.v4l2_standard = {
+	.index = SECAM,
+	.id = V4L2_STD_SECAM,
+	.name = "SECAM",
+	.frameperiod = {1, 25},
+	.framelines = 625,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & NTSC_M ,
+.v4l2_standard = {
+	.index = NTSC_M,
+	.id = V4L2_STD_NTSC_M,
+	.name = "NTSC_M",
+	.frameperiod = {1, 30},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & NTSC_M_JP ,
+.v4l2_standard = {
+	.index = NTSC_M_JP,
+	.id = V4L2_STD_NTSC_M_JP,
+	.name = "NTSC_M_JP",
+	.frameperiod = {1, 30},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & PAL_60 ,
+.v4l2_standard = {
+	.index = PAL_60,
+	.id = V4L2_STD_PAL_60,
+	.name = "PAL_60",
+	.frameperiod = {1, 30},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & NTSC_443 ,
+.v4l2_standard = {
+	.index = NTSC_443,
+	.id = V4L2_STD_NTSC_443,
+	.name = "NTSC_443",
+	.frameperiod = {1, 30},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0x000F & PAL_M ,
+.v4l2_standard = {
+	.index = PAL_M,
+	.id = V4L2_STD_PAL_M,
+	.name = "PAL_M",
+	.frameperiod = {1, 30},
+	.framelines = 525,
+	.reserved = {0, 0, 0, 0}
+}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.mask = 0xFFFF
+}
+};
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE 16-BIT easycap_format.mask HAS MEANING:
+ *    (least significant) BIT  0:     0 => PAL, 25 FPS;   1 => NTSC, 30 FPS
+ *                        BITS 1-3:   RESERVED FOR DIFFERENTIATING STANDARDS
+ *                        BITS 4-7:   NUMBER OF BYTES PER PIXEL
+ *                        BIT  8:     0 => NATIVE BYTE ORDER;  1 => SWAPPED
+ *                        BITS 9-10:  RESERVED FOR OTHER BYTE PERMUTATIONS
+ *                        BIT 11:     0 => UNDECIMATED;  1 => DECIMATED
+ *                        BIT 12:     0 => OFFER FRAMES; 1 => OFFER FIELDS
+ *     (most significant) BITS 13-15: RESERVED FOR OTHER FIELD ORDER OPTIONS
+ *  IT FOLLOWS THAT:
+ *     bytesperpixel IS         ((0x00F0 & easycap_format.mask) >> 4)
+ *     byteswaporder IS true IF (0 != (0x0100 & easycap_format.mask))
+ *
+ *     decimatepixel IS true IF (0 != (0x0800 & easycap_format.mask))
+ *
+ *       offerfields IS true IF (0 != (0x1000 & easycap_format.mask))
+ */
+/*---------------------------------------------------------------------------*/
+
+struct easycap_format easycap_format[1 + SETTINGS_MANY];
+
+int
+fillin_formats(void)
+{
+int i, j, k, m, n;
+__u32 width, height, pixelformat, bytesperline, sizeimage;
+__u32 field, colorspace;
+__u16 mask1, mask2, mask3, mask4;
+char name1[32], name2[32], name3[32], name4[32];
+
+for (i = 0, n = 0; i < STANDARD_MANY; i++) {
+	mask1 = 0x0000;
+	switch (i) {
+	case PAL_BGHIN: {
+		mask1 = PAL_BGHIN;
+		strcpy(&name1[0], "PAL_BGHIN");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_BG;
+		break;
+	}
+	case SECAM: {
+		mask1 = SECAM;
+		strcpy(&name1[0], "SECAM");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_BG;
+		break;
+	}
+	case PAL_Nc: {
+		mask1 = PAL_Nc;
+		strcpy(&name1[0], "PAL_Nc");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_BG;
+		break;
+	}
+	case PAL_60: {
+		mask1 = PAL_60;
+		strcpy(&name1[0], "PAL_60");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_BG;
+		break;
+	}
+	case PAL_M: {
+		mask1 = PAL_M;
+		strcpy(&name1[0], "PAL_M");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_BG;
+		break;
+	}
+	case NTSC_M: {
+		mask1 = NTSC_M;
+		strcpy(&name1[0], "NTSC_M");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_M;
+		break;
+	}
+	case NTSC_443: {
+		mask1 = NTSC_443;
+		strcpy(&name1[0], "NTSC_443");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_M;
+		break;
+	}
+	case NTSC_M_JP: {
+		mask1 = NTSC_M_JP;
+		strcpy(&name1[0], "NTSC_M_JP");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_M;
+		break;
+	}
+	case NTSC_N: {
+		mask1 = NTSC_M;
+		strcpy(&name1[0], "NTSC_N");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_M;
+		break;
+	}
+	case NTSC_N_443: {
+		mask1 = NTSC_N_443;
+		strcpy(&name1[0], "NTSC_N_443");
+		colorspace = V4L2_COLORSPACE_470_SYSTEM_M;
+		break;
+	}
+	default:
+		return -1;
+	}
+
+	for (j = 0; j < RESOLUTION_MANY; j++) {
+		mask2 = 0x0000;
+		switch (j) {
+		case AT_720x576: {
+			if (0x1 & mask1)
+				continue;
+			strcpy(&name2[0], "_AT_720x576");
+			width = 720; height = 576; break;
+		}
+		case AT_704x576: {
+			if (0x1 & mask1)
+				continue;
+			strcpy(&name2[0], "_AT_704x576");
+			width = 704; height = 576; break;
+		}
+		case AT_640x480: {
+			strcpy(&name2[0], "_AT_640x480");
+			width = 640; height = 480; break;
+		}
+		case AT_720x480: {
+			if (!(0x1 & mask1))
+				continue;
+			strcpy(&name2[0], "_AT_720x480");
+			width = 720; height = 480; break;
+		}
+		case AT_360x288: {
+			if (0x1 & mask1)
+				continue;
+			strcpy(&name2[0], "_AT_360x288");
+			width = 360; height = 288; mask2 = 0x0800; break;
+		}
+		case AT_320x240: {
+			strcpy(&name2[0], "_AT_320x240");
+			width = 320; height = 240; mask2 = 0x0800; break;
+		}
+		case AT_360x240: {
+			if (!(0x1 & mask1))
+				continue;
+			strcpy(&name2[0], "_AT_360x240");
+			width = 360; height = 240; mask2 = 0x0800; break;
+		}
+		default:
+			return -2;
+		}
+
+		for (k = 0; k < PIXELFORMAT_MANY; k++) {
+			mask3 = 0x0000;
+			switch (k) {
+			case FMT_UYVY: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_UYVY));
+				pixelformat = V4L2_PIX_FMT_UYVY;
+				mask3 |= (0x02 << 4);
+				break;
+			}
+			case FMT_YUY2: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_YUY2));
+				pixelformat = V4L2_PIX_FMT_YUYV;
+				mask3 |= (0x02 << 4);
+				mask3 |= 0x0100;
+				break;
+			}
+			case FMT_RGB24: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_RGB24));
+				pixelformat = V4L2_PIX_FMT_RGB24;
+				mask3 |= (0x03 << 4);
+				break;
+			}
+			case FMT_RGB32: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_RGB32));
+				pixelformat = V4L2_PIX_FMT_RGB32;
+				mask3 |= (0x04 << 4);
+				break;
+			}
+			case FMT_BGR24: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_BGR24));
+				pixelformat = V4L2_PIX_FMT_BGR24;
+				mask3 |= (0x03 << 4);
+				mask3 |= 0x0100;
+				break;
+			}
+			case FMT_BGR32: {
+				strcpy(&name3[0], "_" STRINGIZE(FMT_BGR32));
+				pixelformat = V4L2_PIX_FMT_BGR32;
+				mask3 |= (0x04 << 4);
+				mask3 |= 0x0100;
+				break;
+			}
+			default:
+				return -3;
+			}
+			bytesperline = width * ((mask3 & 0x00F0) >> 4);
+			sizeimage =  bytesperline * height;
+
+			for (m = 0; m < INTERLACE_MANY; m++) {
+				mask4 = 0x0000;
+				switch (m) {
+				case FIELD_NONE: {
+					strcpy(&name4[0], "-n");
+					field = V4L2_FIELD_NONE;
+					break;
+				}
+				case FIELD_INTERLACED: {
+					strcpy(&name4[0], "-i");
+					field = V4L2_FIELD_INTERLACED;
+					break;
+				}
+				case FIELD_ALTERNATE: {
+					strcpy(&name4[0], "-a");
+					mask4 |= 0x1000;
+					field = V4L2_FIELD_ALTERNATE;
+					break;
+				}
+				default:
+					return -4;
+				}
+				if (SETTINGS_MANY <= n)
+					return -5;
+				strcpy(&easycap_format[n].name[0], &name1[0]);
+				strcat(&easycap_format[n].name[0], &name2[0]);
+				strcat(&easycap_format[n].name[0], &name3[0]);
+				strcat(&easycap_format[n].name[0], &name4[0]);
+				easycap_format[n].mask = \
+						mask1 | mask2 | mask3 | mask4;
+				easycap_format[n].v4l2_format\
+					.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.width = width;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.height = height;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.pixelformat = pixelformat;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.field = field;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.bytesperline = bytesperline;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.sizeimage = sizeimage;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.colorspace = colorspace;
+				easycap_format[n].v4l2_format\
+					.fmt.pix.priv = 0;
+				n++;
+			}
+		}
+	}
+}
+if ((1 + SETTINGS_MANY) <= n)
+	return -6;
+easycap_format[n].mask = 0xFFFF;
+return n;
+}
+/*---------------------------------------------------------------------------*/
+struct v4l2_queryctrl easycap_control[] = \
+ {{
+.id       = V4L2_CID_BRIGHTNESS,
+.type     = V4L2_CTRL_TYPE_INTEGER,
+.name     = "Brightness",
+.minimum  = 0,
+.maximum  = 255,
+.step     =  1,
+.default_value = SAA_0A_DEFAULT,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id       = V4L2_CID_CONTRAST,
+.type     = V4L2_CTRL_TYPE_INTEGER,
+.name     = "Contrast",
+.minimum  = 0,
+.maximum  = 255,
+.step     =   1,
+.default_value = SAA_0B_DEFAULT + 128,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id       = V4L2_CID_SATURATION,
+.type     = V4L2_CTRL_TYPE_INTEGER,
+.name     = "Saturation",
+.minimum  = 0,
+.maximum  = 255,
+.step     =   1,
+.default_value = SAA_0C_DEFAULT + 128,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id       = V4L2_CID_HUE,
+.type     = V4L2_CTRL_TYPE_INTEGER,
+.name     = "Hue",
+.minimum  = 0,
+.maximum  = 255,
+.step     =   1,
+.default_value = SAA_0D_DEFAULT + 128,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id       = V4L2_CID_AUDIO_VOLUME,
+.type     = V4L2_CTRL_TYPE_INTEGER,
+.name     = "Volume",
+.minimum  = 0,
+.maximum  = 31,
+.step     =   1,
+.default_value = 16,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id       = V4L2_CID_AUDIO_MUTE,
+.type     = V4L2_CTRL_TYPE_BOOLEAN,
+.name     = "Mute",
+.default_value = true,
+.flags    = 0,
+.reserved = {0, 0}
+},
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+{
+.id = 0xFFFFFFFF
+}
+ };
+/*****************************************************************************/
diff --git a/drivers/staging/easycap/easycap_sound.c b/drivers/staging/easycap/easycap_sound.c
new file mode 100644
index 00000000000..63562bda738
--- /dev/null
+++ b/drivers/staging/easycap/easycap_sound.c
@@ -0,0 +1,1046 @@
+/******************************************************************************
+*                                                                             *
+*  easycap_sound.c                                                            *
+*                                                                             *
+*  Audio driver for EasyCAP USB2.0 Video Capture Device DC60                  *
+*                                                                             *
+*                                                                             *
+******************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+
+#include "easycap.h"
+#include "easycap_debug.h"
+#include "easycap_sound.h"
+
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  ON COMPLETION OF AN AUDIO URB ITS DATA IS COPIED TO THE AUDIO BUFFERS
+ *  PROVIDED peasycap->audio_idle IS ZER0.  REGARDLESS OF THIS BEING TRUE,
+ *  IT IS RESUBMITTED PROVIDED peasycap->audio_isoc_streaming IS NOT ZERO.
+ */
+/*---------------------------------------------------------------------------*/
+void
+easysnd_complete(struct urb *purb)
+{
+static int mt;
+struct easycap *peasycap;
+struct data_buffer *paudio_buffer;
+char errbuf[16];
+__u8 *p1, *p2;
+__s16 s16;
+int i, j, more, much, leap, rc;
+#if defined(UPSAMPLE)
+int k;
+__s16 oldaudio, newaudio, delta;
+#endif /*UPSAMPLE*/
+
+JOT(16, "\n");
+
+if (NULL == purb) {
+	SAY("ERROR: purb is NULL\n");
+	return;
+}
+peasycap = purb->context;
+if (NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL\n");
+	return;
+}
+much = 0;
+
+
+if (peasycap->audio_idle) {
+	JOT(16, "%i=audio_idle  %i=audio_isoc_streaming\n", \
+			peasycap->audio_idle, peasycap->audio_isoc_streaming);
+	if (peasycap->audio_isoc_streaming) {
+		rc = usb_submit_urb(purb, GFP_ATOMIC);
+		if (0 != rc) {
+			SAY("ERROR: while %i=audio_idle, " \
+					"usb_submit_urb() failed with rc:\n", \
+							peasycap->audio_idle);
+			switch (rc) {
+			case -ENOMEM: {
+				SAY("ENOMEM\n");    break;
+			}
+			case -ENODEV: {
+				SAY("ENODEV\n");    break;
+			}
+			case -ENXIO: {
+				SAY("ENXIO\n");     break;
+			}
+			case -EINVAL: {
+				SAY("EINVAL\n");    break;
+			}
+			case -EAGAIN: {
+				SAY("EAGAIN\n");    break;
+			}
+			case -EFBIG: {
+				SAY("EFBIG\n");     break;
+			}
+			case -EPIPE: {
+				SAY("EPIPE\n");     break;
+			}
+			case -EMSGSIZE: {
+				SAY("EMSGSIZE\n");  break;
+			}
+			case -ENOSPC: {
+				SAY("ENOSPC\n");  break;
+			}
+			default: {
+				SAY("0x%08X\n", rc); break;
+			}
+			}
+		}
+	}
+return;
+}
+/*---------------------------------------------------------------------------*/
+if (purb->status) {
+	if (-ESHUTDOWN == purb->status) {
+		JOT(16, "immediate return because -ESHUTDOWN=purb->status\n");
+		return;
+	}
+	SAY("ERROR: non-zero urb status:\n");
+	switch (purb->status) {
+	case -EINPROGRESS: {
+		SAY("-EINPROGRESS\n"); break;
+	}
+	case -ENOSR: {
+		SAY("-ENOSR\n"); break;
+	}
+	case -EPIPE: {
+		SAY("-EPIPE\n"); break;
+	}
+	case -EOVERFLOW: {
+		SAY("-EOVERFLOW\n"); break;
+	}
+	case -EPROTO: {
+		SAY("-EPROTO\n"); break;
+	}
+	case -EILSEQ: {
+		SAY("-EILSEQ\n"); break;
+	}
+	case -ETIMEDOUT: {
+		SAY("-ETIMEDOUT\n"); break;
+	}
+	case -EMSGSIZE: {
+		SAY("-EMSGSIZE\n"); break;
+	}
+	case -EOPNOTSUPP: {
+		SAY("-EOPNOTSUPP\n"); break;
+	}
+	case -EPFNOSUPPORT: {
+		SAY("-EPFNOSUPPORT\n"); break;
+	}
+	case -EAFNOSUPPORT: {
+		SAY("-EAFNOSUPPORT\n"); break;
+	}
+	case -EADDRINUSE: {
+		SAY("-EADDRINUSE\n"); break;
+	}
+	case -EADDRNOTAVAIL: {
+		SAY("-EADDRNOTAVAIL\n"); break;
+	}
+	case -ENOBUFS: {
+		SAY("-ENOBUFS\n"); break;
+	}
+	case -EISCONN: {
+		SAY("-EISCONN\n"); break;
+	}
+	case -ENOTCONN: {
+		SAY("-ENOTCONN\n"); break;
+	}
+	case -ESHUTDOWN: {
+		SAY("-ESHUTDOWN\n"); break;
+	}
+	case -ENOENT: {
+		SAY("-ENOENT\n"); break;
+	}
+	case -ECONNRESET: {
+		SAY("-ECONNRESET\n"); break;
+	}
+	case -ENOSPC: {
+		SAY("ENOSPC\n");  break;
+	}
+	default: {
+		SAY("unknown error code 0x%08X\n", purb->status); break;
+	}
+	}
+/*---------------------------------------------------------------------------*/
+/*
+ *  RESUBMIT THIS URB AFTER AN ERROR
+ *
+ *  (THIS IS DUPLICATE CODE TO REDUCE INDENTATION OF THE NO-ERROR PATH)
+ */
+/*---------------------------------------------------------------------------*/
+	if (peasycap->audio_isoc_streaming) {
+		rc = usb_submit_urb(purb, GFP_ATOMIC);
+		if (0 != rc) {
+			SAY("ERROR: while %i=audio_idle, usb_submit_urb() "
+				"failed with rc:\n", peasycap->audio_idle);
+			switch (rc) {
+			case -ENOMEM: {
+				SAY("ENOMEM\n");    break;
+			}
+			case -ENODEV: {
+				SAY("ENODEV\n");    break;
+			}
+			case -ENXIO: {
+				SAY("ENXIO\n");     break;
+			}
+			case -EINVAL: {
+				SAY("EINVAL\n");    break;
+			}
+			case -EAGAIN: {
+				SAY("EAGAIN\n");    break;
+			}
+			case -EFBIG: {
+				SAY("EFBIG\n");     break;
+			}
+			case -EPIPE: {
+				SAY("EPIPE\n");     break;
+			}
+			case -EMSGSIZE: {
+				SAY("EMSGSIZE\n");  break;
+			}
+			default: {
+				SAY("0x%08X\n", rc); break;
+			}
+			}
+		}
+	}
+	return;
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  PROCEED HERE WHEN NO ERROR
+ */
+/*---------------------------------------------------------------------------*/
+#if defined(UPSAMPLE)
+oldaudio = peasycap->oldaudio;
+#endif /*UPSAMPLE*/
+
+for (i = 0;  i < purb->number_of_packets; i++) {
+	switch (purb->iso_frame_desc[i].status) {
+	case  0: {
+		strcpy(&errbuf[0], "OK"); break;
+	}
+	case -ENOENT: {
+		strcpy(&errbuf[0], "-ENOENT"); break;
+	}
+	case -EINPROGRESS: {
+		strcpy(&errbuf[0], "-EINPROGRESS"); break;
+	}
+	case -EPROTO: {
+		strcpy(&errbuf[0], "-EPROTO"); break;
+	}
+	case -EILSEQ: {
+		strcpy(&errbuf[0], "-EILSEQ"); break;
+	}
+	case -ETIME: {
+		strcpy(&errbuf[0], "-ETIME"); break;
+	}
+	case -ETIMEDOUT: {
+		strcpy(&errbuf[0], "-ETIMEDOUT"); break;
+	}
+	case -EPIPE: {
+		strcpy(&errbuf[0], "-EPIPE"); break;
+	}
+	case -ECOMM: {
+		strcpy(&errbuf[0], "-ECOMM"); break;
+	}
+	case -ENOSR: {
+		strcpy(&errbuf[0], "-ENOSR"); break;
+	}
+	case -EOVERFLOW: {
+		strcpy(&errbuf[0], "-EOVERFLOW"); break;
+	}
+	case -EREMOTEIO: {
+		strcpy(&errbuf[0], "-EREMOTEIO"); break;
+	}
+	case -ENODEV: {
+		strcpy(&errbuf[0], "-ENODEV"); break;
+	}
+	case -EXDEV: {
+		strcpy(&errbuf[0], "-EXDEV"); break;
+	}
+	case -EINVAL: {
+		strcpy(&errbuf[0], "-EINVAL"); break;
+	}
+	case -ECONNRESET: {
+		strcpy(&errbuf[0], "-ECONNRESET"); break;
+	}
+	case -ENOSPC: {
+		strcpy(&errbuf[0], "-ENOSPC"); break;
+	}
+	case -ESHUTDOWN: {
+		strcpy(&errbuf[0], "-ESHUTDOWN"); break;
+	}
+	default: {
+		strcpy(&errbuf[0], "UNKNOWN"); break;
+	}
+	}
+	if ((!purb->iso_frame_desc[i].status) && 0) {
+		JOT(16, "frame[%2i]: %i=status{=%16s}  "  \
+						"%5i=actual  "  \
+						"%5i=length  "  \
+						"%3i=offset\n", \
+				i, purb->iso_frame_desc[i].status, &errbuf[0],
+				purb->iso_frame_desc[i].actual_length,
+				purb->iso_frame_desc[i].length,
+				purb->iso_frame_desc[i].offset);
+	}
+	if (!purb->iso_frame_desc[i].status) {
+		more = purb->iso_frame_desc[i].actual_length;
+
+#if defined(TESTTONE)
+		if (!more)
+			more = purb->iso_frame_desc[i].length;
+#endif
+
+		if (!more)
+			mt++;
+		else {
+			if (mt) {
+				JOT(16, "%4i empty audio urb frames\n", mt);
+				mt = 0;
+			}
+
+			p1 = (__u8 *)(purb->transfer_buffer + \
+					purb->iso_frame_desc[i].offset);
+
+			leap = 0;
+			p1 += leap;
+			more -= leap;
+/*---------------------------------------------------------------------------*/
+/*
+ *  COPY more BYTES FROM ISOC BUFFER TO AUDIO BUFFER,
+ *  CONVERTING 8-BIT MONO TO 16-BIT SIGNED LITTLE-ENDIAN SAMPLES IF NECESSARY
+ */
+/*---------------------------------------------------------------------------*/
+			while (more) {
+				if (0 > more) {
+					SAY("easysnd_complete: MISTAKE: " \
+							"more is negative\n");
+					return;
+				}
+				if (peasycap->audio_buffer_page_many <= \
+							peasycap->audio_fill) {
+					SAY("ERROR: bad " \
+						"peasycap->audio_fill\n");
+					return;
+				}
+
+				paudio_buffer = &peasycap->audio_buffer\
+							[peasycap->audio_fill];
+				if (PAGE_SIZE < (paudio_buffer->pto - \
+						paudio_buffer->pgo)) {
+					SAY("ERROR: bad paudio_buffer->pto\n");
+					return;
+				}
+				if (PAGE_SIZE == (paudio_buffer->pto - \
+							paudio_buffer->pgo)) {
+
+#if defined(TESTTONE)
+					easysnd_testtone(peasycap, \
+							peasycap->audio_fill);
+#endif /*TESTTONE*/
+
+					paudio_buffer->pto = \
+							paudio_buffer->pgo;
+					(peasycap->audio_fill)++;
+					if (peasycap->\
+						audio_buffer_page_many <= \
+							peasycap->audio_fill)
+						peasycap->audio_fill = 0;
+
+					JOT(12, "bumped peasycap->" \
+							"audio_fill to %i\n", \
+							peasycap->audio_fill);
+
+					paudio_buffer = &peasycap->\
+							audio_buffer\
+							[peasycap->audio_fill];
+					paudio_buffer->pto = \
+							paudio_buffer->pgo;
+
+					if (!(peasycap->audio_fill % \
+						peasycap->\
+						audio_pages_per_fragment)) {
+						JOT(12, "wakeup call on wq_" \
+						"audio, %i=frag reading  %i" \
+						"=fragment fill\n", \
+						(peasycap->audio_read / \
+						peasycap->\
+						audio_pages_per_fragment), \
+						(peasycap->audio_fill / \
+						peasycap->\
+						audio_pages_per_fragment));
+						wake_up_interruptible\
+						(&(peasycap->wq_audio));
+					}
+				}
+
+				much = PAGE_SIZE - (int)(paudio_buffer->pto -\
+							 paudio_buffer->pgo);
+
+				if (false == peasycap->microphone) {
+					if (much > more)
+						much = more;
+
+					memcpy(paudio_buffer->pto, p1, much);
+					p1 += much;
+					more -= much;
+				} else {
+#if defined(UPSAMPLE)
+					if (much % 16)
+						JOT(8, "MISTAKE? much" \
+						" is not divisible by 16\n");
+					if (much > (16 * \
+							more))
+						much = 16 * \
+							more;
+					p2 = (__u8 *)paudio_buffer->pto;
+
+					for (j = 0;  j < (much/16);  j++) {
+						newaudio =  ((int) *p1) - 128;
+						newaudio = 128 * \
+								newaudio;
+
+						delta = (newaudio - oldaudio) \
+									/ 4;
+						s16 = oldaudio + delta;
+
+						for (k = 0;  k < 4;  k++) {
+							*p2 = (0x00FF & s16);
+							*(p2 + 1) = (0xFF00 & \
+								s16) >> 8;
+							p2 += 2;
+							*p2 = (0x00FF & s16);
+							*(p2 + 1) = (0xFF00 & \
+								s16) >> 8;
+							p2 += 2;
+
+							s16 += delta;
+						}
+						p1++;
+						more--;
+						oldaudio = s16;
+					}
+#else
+					if (much > (2 * more))
+						much = 2 * more;
+					p2 = (__u8 *)paudio_buffer->pto;
+
+					for (j = 0;  j < (much / 2);  j++) {
+						s16 =  ((int) *p1) - 128;
+						s16 = 128 * \
+								s16;
+						*p2 = (0x00FF & s16);
+						*(p2 + 1) = (0xFF00 & s16) >> \
+									8;
+						p1++;  p2 += 2;
+						more--;
+					}
+#endif /*UPSAMPLE*/
+				}
+				(paudio_buffer->pto) += much;
+			}
+		}
+	} else {
+		JOT(12, "discarding audio samples because " \
+			"%i=purb->iso_frame_desc[i].status\n", \
+				purb->iso_frame_desc[i].status);
+	}
+
+#if defined(UPSAMPLE)
+peasycap->oldaudio = oldaudio;
+#endif /*UPSAMPLE*/
+
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  RESUBMIT THIS URB AFTER NO ERROR
+ */
+/*---------------------------------------------------------------------------*/
+if (peasycap->audio_isoc_streaming) {
+	rc = usb_submit_urb(purb, GFP_ATOMIC);
+	if (0 != rc) {
+		SAY("ERROR: while %i=audio_idle, usb_submit_urb() failed " \
+					"with rc:\n", peasycap->audio_idle);
+		switch (rc) {
+		case -ENOMEM: {
+			SAY("ENOMEM\n");    break;
+		}
+		case -ENODEV: {
+			SAY("ENODEV\n");    break;
+		}
+		case -ENXIO: {
+			SAY("ENXIO\n");     break;
+		}
+		case -EINVAL: {
+			SAY("EINVAL\n");    break;
+		}
+		case -EAGAIN: {
+			SAY("EAGAIN\n");    break;
+		}
+		case -EFBIG: {
+			SAY("EFBIG\n");     break;
+		}
+		case -EPIPE: {
+			SAY("EPIPE\n");     break;
+		}
+		case -EMSGSIZE: {
+			SAY("EMSGSIZE\n");  break;
+		}
+		case -ENOSPC: {
+			SAY("ENOSPC\n");  break;
+		}
+		default: {
+			SAY("0x%08X\n", rc); break;
+		}
+		}
+	}
+}
+return;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  THE AUDIO URBS ARE SUBMITTED AT THIS EARLY STAGE SO THAT IT IS POSSIBLE TO
+ *  STREAM FROM /dev/easysnd1 WITH SIMPLE PROGRAMS SUCH AS cat WHICH DO NOT
+ *  HAVE AN IOCTL INTERFACE.  THE VIDEO URBS, BY CONTRAST, MUST BE SUBMITTED
+ *  MUCH LATER: SEE COMMENTS IN FILE easycap_main.c.
+ */
+/*---------------------------------------------------------------------------*/
+int
+easysnd_open(struct inode *inode, struct file *file)
+{
+struct usb_interface *pusb_interface;
+struct easycap *peasycap;
+int subminor, rc;
+
+JOT(4, "begins.\n");
+
+subminor = iminor(inode);
+
+pusb_interface = usb_find_interface(&easycap_usb_driver, subminor);
+if (NULL == pusb_interface) {
+	SAY("ERROR: pusb_interface is NULL\n");
+	SAY("ending unsuccessfully\n");
+	return -1;
+}
+peasycap = usb_get_intfdata(pusb_interface);
+if (NULL == peasycap) {
+	SAY("ERROR: peasycap is NULL\n");
+	SAY("ending unsuccessfully\n");
+	return -1;
+}
+
+file->private_data = peasycap;
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  INITIALIZATION.
+ */
+/*---------------------------------------------------------------------------*/
+JOT(4, "starting initialization\n");
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+} else {
+	JOT(16, "0x%08lX=peasycap->pusb_device\n", \
+					(long int)peasycap->pusb_device);
+}
+
+rc = audio_setup(peasycap);
+if (0 <= rc)
+	JOT(8, "audio_setup() returned %i\n", rc);
+else
+	JOT(8, "easysnd open(): ERROR: audio_setup() returned %i\n", rc);
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device has become NULL\n");
+	return -EFAULT;
+}
+rc = adjust_volume(peasycap, -8192);
+if (0 != rc) {
+	SAY("ERROR: adjust_volume(default) returned %i\n", rc);
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device has become NULL\n");
+	return -EFAULT;
+}
+rc = usb_set_interface(peasycap->pusb_device, peasycap->audio_interface, \
+					peasycap->audio_altsetting_on);
+JOT(8, "usb_set_interface(.,%i,%i) returned %i\n", peasycap->audio_interface, \
+					peasycap->audio_altsetting_on, rc);
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device has become NULL\n");
+	return -EFAULT;
+}
+rc = wakeup_device(peasycap->pusb_device);
+if (0 == rc)
+	JOT(8, "wakeup_device() returned %i\n", rc);
+else
+	JOT(8, "easysnd open(): ERROR: wakeup_device() returned %i\n", rc);
+
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device has become NULL\n");
+	return -EFAULT;
+}
+submit_audio_urbs(peasycap);
+peasycap->audio_idle = 0;
+
+peasycap->timeval1.tv_sec  = 0;
+peasycap->timeval1.tv_usec = 0;
+
+JOT(4, "finished initialization\n");
+return 0;
+}
+/*****************************************************************************/
+int
+easysnd_release(struct inode *inode, struct file *file)
+{
+struct easycap *peasycap;
+
+JOT(4, "begins\n");
+
+peasycap = file->private_data;
+if (NULL == peasycap) {
+	SAY("ERROR:  peasycap is NULL.\n");
+	return -EFAULT;
+}
+if (0 != kill_audio_urbs(peasycap)) {
+	SAY("ERROR: kill_audio_urbs() failed\n");
+	return -EFAULT;
+}
+JOT(4, "ending successfully\n");
+return 0;
+}
+/*****************************************************************************/
+ssize_t
+easysnd_read(struct file *file, char __user *puserspacebuffer, \
+						size_t kount, loff_t *poff)
+{
+struct timeval timeval;
+static struct timeval timeval1;
+static long long int audio_bytes, above, below, mean;
+struct signed_div_result sdr;
+unsigned char *p0;
+long int kount1, more, rc, l0, lm;
+int fragment;
+struct easycap *peasycap;
+struct data_buffer *pdata_buffer;
+size_t szret;
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  DO A BLOCKING READ TO TRANSFER DATA TO USER SPACE.
+ *
+ ******************************************************************************
+ *****  N.B.  IF THIS FUNCTION RETURNS 0, NOTHING IS SEEN IN USER SPACE. ******
+ *****        THIS CONDITION SIGNIFIES END-OF-FILE.                      ******
+ ******************************************************************************
+ */
+/*---------------------------------------------------------------------------*/
+
+JOT(8, "===== easysnd_read(): kount=%i, *poff=%i\n", (int)kount, (int)(*poff));
+
+peasycap = (struct easycap *)(file->private_data);
+if (NULL == peasycap) {
+	SAY("ERROR in easysnd_read(): peasycap is NULL\n");
+	return -EFAULT;
+}
+/*---------------------------------------------------------------------------*/
+if ((0 > peasycap->audio_read) || \
+		(peasycap->audio_buffer_page_many <= peasycap->audio_read)) {
+	SAY("ERROR: peasycap->audio_read out of range\n");
+	return -EFAULT;
+}
+pdata_buffer = &peasycap->audio_buffer[peasycap->audio_read];
+if ((struct data_buffer *)NULL == pdata_buffer) {
+	SAY("ERROR: pdata_buffer is NULL\n");
+	return -EFAULT;
+}
+JOT(12, "before wait, %i=frag read  %i=frag fill\n", \
+		(peasycap->audio_read / peasycap->audio_pages_per_fragment), \
+		(peasycap->audio_fill / peasycap->audio_pages_per_fragment));
+fragment = (peasycap->audio_read / peasycap->audio_pages_per_fragment);
+while ((fragment == (peasycap->audio_fill / \
+				peasycap->audio_pages_per_fragment)) || \
+		(0 == (PAGE_SIZE - (pdata_buffer->pto - pdata_buffer->pgo)))) {
+	if (file->f_flags & O_NONBLOCK) {
+		JOT(16, "returning -EAGAIN as instructed\n");
+		return -EAGAIN;
+	}
+	rc = wait_event_interruptible(peasycap->wq_audio, \
+		(peasycap->audio_idle  || peasycap->audio_eof   || \
+		((fragment != (peasycap->audio_fill / \
+				peasycap->audio_pages_per_fragment)) && \
+		(0 < (PAGE_SIZE - (pdata_buffer->pto - pdata_buffer->pgo))))));
+	if (0 != rc) {
+		SAY("aborted by signal\n");
+		return -ERESTARTSYS;
+	}
+	if (peasycap->audio_eof) {
+		JOT(8, "returning 0 because  %i=audio_eof\n", \
+							peasycap->audio_eof);
+		kill_audio_urbs(peasycap);
+		msleep(500);
+		return 0;
+	}
+	if (peasycap->audio_idle) {
+		JOT(16, "returning 0 because  %i=audio_idle\n", \
+							peasycap->audio_idle);
+		return 0;
+	}
+	if (!peasycap->audio_isoc_streaming) {
+		JOT(16, "returning 0 because audio urbs not streaming\n");
+		return 0;
+	}
+}
+JOT(12, "after  wait, %i=frag read  %i=frag fill\n", \
+		(peasycap->audio_read / peasycap->audio_pages_per_fragment), \
+		(peasycap->audio_fill / peasycap->audio_pages_per_fragment));
+szret = (size_t)0;
+while (fragment == (peasycap->audio_read / \
+				peasycap->audio_pages_per_fragment)) {
+	if (NULL == pdata_buffer->pgo) {
+		SAY("ERROR: pdata_buffer->pgo is NULL\n");
+		return -EFAULT;
+	}
+	if (NULL == pdata_buffer->pto) {
+		SAY("ERROR: pdata_buffer->pto is NULL\n");
+		return -EFAULT;
+	}
+	kount1 = PAGE_SIZE - (pdata_buffer->pto - pdata_buffer->pgo);
+	if (0 > kount1) {
+		SAY("easysnd_read: MISTAKE: kount1 is negative\n");
+		return -ERESTARTSYS;
+	}
+	if (!kount1) {
+		(peasycap->audio_read)++;
+		if (peasycap->audio_buffer_page_many <= peasycap->audio_read)
+			peasycap->audio_read = 0;
+		JOT(12, "bumped peasycap->audio_read to %i\n", \
+						peasycap->audio_read);
+
+		if (fragment != (peasycap->audio_read / \
+					peasycap->audio_pages_per_fragment))
+			break;
+
+		if ((0 > peasycap->audio_read) || \
+			(peasycap->audio_buffer_page_many <= \
+					peasycap->audio_read)) {
+			SAY("ERROR: peasycap->audio_read out of range\n");
+			return -EFAULT;
+		}
+		pdata_buffer = &peasycap->audio_buffer[peasycap->audio_read];
+		if ((struct data_buffer *)NULL == pdata_buffer) {
+			SAY("ERROR: pdata_buffer is NULL\n");
+			return -EFAULT;
+		}
+		if (NULL == pdata_buffer->pgo) {
+			SAY("ERROR: pdata_buffer->pgo is NULL\n");
+			return -EFAULT;
+		}
+		if (NULL == pdata_buffer->pto) {
+			SAY("ERROR: pdata_buffer->pto is NULL\n");
+			return -EFAULT;
+		}
+		kount1 = PAGE_SIZE - (pdata_buffer->pto - pdata_buffer->pgo);
+	}
+	JOT(12, "ready  to send %li bytes\n", (long int) kount1);
+	JOT(12, "still  to send %li bytes\n", (long int) kount);
+	more = kount1;
+	if (more > kount)
+		more = kount;
+	JOT(12, "agreed to send %li bytes from page %i\n", \
+						more, peasycap->audio_read);
+	if (!more)
+		break;
+
+/*---------------------------------------------------------------------------*/
+/*
+ *  ACCUMULATE DYNAMIC-RANGE INFORMATION
+ */
+/*---------------------------------------------------------------------------*/
+	p0 = (unsigned char *)pdata_buffer->pgo;  l0 = 0;  lm = more/2;
+	while (l0 < lm) {
+		SUMMER(p0, &peasycap->audio_sample, &peasycap->audio_niveau, \
+				&peasycap->audio_square);  l0++;  p0 += 2;
+	}
+/*---------------------------------------------------------------------------*/
+	rc = copy_to_user(puserspacebuffer, pdata_buffer->pto, more);
+	if (0 != rc) {
+		SAY("ERROR: copy_to_user() returned %li\n", rc);
+		return -EFAULT;
+	}
+	*poff += (loff_t)more;
+	szret += (size_t)more;
+	pdata_buffer->pto += more;
+	puserspacebuffer += more;
+	kount -= (size_t)more;
+}
+JOT(12, "after  read, %i=frag read  %i=frag fill\n", \
+		(peasycap->audio_read / peasycap->audio_pages_per_fragment), \
+		(peasycap->audio_fill / peasycap->audio_pages_per_fragment));
+if (kount < 0) {
+	SAY("MISTAKE:  %li=kount  %li=szret\n", \
+					(long int)kount, (long int)szret);
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  CALCULATE DYNAMIC RANGE FOR (VAPOURWARE) AUTOMATIC VOLUME CONTROL
+ */
+/*---------------------------------------------------------------------------*/
+if (peasycap->audio_sample) {
+	below = peasycap->audio_sample;
+	above = peasycap->audio_square;
+	sdr = signed_div(above, below);
+	above = sdr.quotient;
+	mean = peasycap->audio_niveau;
+	sdr = signed_div(mean, peasycap->audio_sample);
+
+	JOT(8, "%8lli=mean  %8lli=meansquare after %lli samples, =>\n", \
+				sdr.quotient, above, peasycap->audio_sample);
+
+	sdr = signed_div(above, 32768);
+	JOT(8, "audio dynamic range is roughly %lli\n", sdr.quotient);
+}
+/*---------------------------------------------------------------------------*/
+/*
+ *  UPDATE THE AUDIO CLOCK
+ */
+/*---------------------------------------------------------------------------*/
+do_gettimeofday(&timeval);
+if (!peasycap->timeval1.tv_sec) {
+	audio_bytes = 0;
+	timeval1 = timeval;
+
+	if (mutex_lock_interruptible(&(peasycap->mutex_timeval1)))
+		return -ERESTARTSYS;
+	peasycap->timeval1 = timeval1;
+	mutex_unlock(&(peasycap->mutex_timeval1));
+	sdr.quotient = 192000;
+} else {
+	audio_bytes += (long long int) szret;
+	below = ((long long int)(1000000)) * \
+		((long long int)(timeval.tv_sec  - timeval1.tv_sec)) + \
+		(long long int)(timeval.tv_usec - timeval1.tv_usec);
+	above = 1000000 * ((long long int) audio_bytes);
+
+	if (below)
+		sdr = signed_div(above, below);
+	else
+		sdr.quotient = 192000;
+}
+JOT(8, "audio streaming at %lli bytes/second\n", sdr.quotient);
+if (mutex_lock_interruptible(&(peasycap->mutex_timeval1)))
+	return -ERESTARTSYS;
+peasycap->dnbydt = sdr.quotient;
+mutex_unlock(&(peasycap->mutex_timeval1));
+
+JOT(8, "returning %li\n", (long int)szret);
+return szret;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  SUBMIT ALL AUDIO URBS.
+ */
+/*---------------------------------------------------------------------------*/
+int
+submit_audio_urbs(struct easycap *peasycap)
+{
+struct data_urb *pdata_urb;
+struct urb *purb;
+struct list_head *plist_head;
+int j, isbad, m, rc;
+int isbuf;
+
+if ((struct list_head *)NULL == peasycap->purb_audio_head) {
+	SAY("ERROR: peasycap->urb_audio_head uninitialized\n");
+	return -EFAULT;
+}
+if ((struct usb_device *)NULL == peasycap->pusb_device) {
+	SAY("ERROR: peasycap->pusb_device is NULL\n");
+	return -EFAULT;
+}
+if (!peasycap->audio_isoc_streaming) {
+	JOT(4, "initial submission of all audio urbs\n");
+	rc = usb_set_interface(peasycap->pusb_device,
+					peasycap->audio_interface, \
+					peasycap->audio_altsetting_on);
+	JOT(8, "usb_set_interface(.,%i,%i) returned %i\n", \
+					peasycap->audio_interface, \
+					peasycap->audio_altsetting_on, rc);
+
+	isbad = 0;  m = 0;
+	list_for_each(plist_head, (peasycap->purb_audio_head)) {
+		pdata_urb = list_entry(plist_head, struct data_urb, list_head);
+		if (NULL != pdata_urb) {
+			purb = pdata_urb->purb;
+			if (NULL != purb) {
+				isbuf = pdata_urb->isbuf;
+
+				purb->interval = 1;
+				purb->dev = peasycap->pusb_device;
+				purb->pipe = \
+					usb_rcvisocpipe(peasycap->pusb_device,\
+					peasycap->audio_endpointnumber);
+				purb->transfer_flags = URB_ISO_ASAP;
+				purb->transfer_buffer = \
+					peasycap->audio_isoc_buffer[isbuf].pgo;
+				purb->transfer_buffer_length = \
+					peasycap->audio_isoc_buffer_size;
+				purb->complete = easysnd_complete;
+				purb->context = peasycap;
+				purb->start_frame = 0;
+				purb->number_of_packets = \
+					peasycap->audio_isoc_framesperdesc;
+				for (j = 0;  j < peasycap->\
+						audio_isoc_framesperdesc; \
+									j++) {
+					purb->iso_frame_desc[j].offset = j * \
+						peasycap->\
+						audio_isoc_maxframesize;
+					purb->iso_frame_desc[j].length = \
+						peasycap->\
+						audio_isoc_maxframesize;
+				}
+
+				rc = usb_submit_urb(purb, GFP_KERNEL);
+				if (0 != rc) {
+					isbad++;
+					SAY("ERROR: usb_submit_urb() failed" \
+							" for urb with rc:\n");
+					switch (rc) {
+					case -ENOMEM: {
+						SAY("ENOMEM\n"); break;
+					}
+					case -ENODEV: {
+						SAY("ENODEV\n"); break;
+					}
+					case -ENXIO: {
+						SAY("ENXIO\n"); break;
+					}
+					case -EINVAL: {
+						SAY("EINVAL\n"); break;
+					}
+					case -EAGAIN: {
+						SAY("EAGAIN\n"); break;
+					}
+					case -EFBIG: {
+						SAY("EFBIG\n"); break;
+					}
+					case -EPIPE: {
+						SAY("EPIPE\n"); break;
+					}
+					case -EMSGSIZE: {
+						SAY("EMSGSIZE\n"); break;
+					}
+					case -ENOSPC: {
+						SAY("ENOSPC\n"); break;
+					}
+					default: {
+						SAY("unknown error code %i\n",\
+								 rc); break;
+					}
+					}
+				} else {
+					 m++;
+				}
+			} else {
+				isbad++;
+			}
+		} else {
+			isbad++;
+		}
+	}
+	if (isbad) {
+		JOT(4, "attempting cleanup instead of submitting\n");
+		list_for_each(plist_head, (peasycap->purb_audio_head)) {
+			pdata_urb = list_entry(plist_head, struct data_urb, \
+								list_head);
+			if (NULL != pdata_urb) {
+				purb = pdata_urb->purb;
+				if (NULL != purb)
+					usb_kill_urb(purb);
+			}
+		}
+		peasycap->audio_isoc_streaming = 0;
+	} else {
+		peasycap->audio_isoc_streaming = 1;
+		JOT(4, "submitted %i audio urbs\n", m);
+	}
+} else
+	JOT(4, "already streaming audio urbs\n");
+
+return 0;
+}
+/*****************************************************************************/
+/*---------------------------------------------------------------------------*/
+/*
+ *  KILL ALL AUDIO URBS.
+ */
+/*---------------------------------------------------------------------------*/
+int
+kill_audio_urbs(struct easycap *peasycap)
+{
+int m;
+struct list_head *plist_head;
+struct data_urb *pdata_urb;
+
+if (peasycap->audio_isoc_streaming) {
+	if ((struct list_head *)NULL != peasycap->purb_audio_head) {
+		peasycap->audio_isoc_streaming = 0;
+		JOT(4, "killing audio urbs\n");
+		m = 0;
+		list_for_each(plist_head, (peasycap->purb_audio_head)) {
+			pdata_urb = list_entry(plist_head, struct data_urb,
+								list_head);
+			if ((struct data_urb *)NULL != pdata_urb) {
+				if ((struct urb *)NULL != pdata_urb->purb) {
+					usb_kill_urb(pdata_urb->purb);
+					m++;
+				}
+			}
+		}
+		JOT(4, "%i audio urbs killed\n", m);
+	} else {
+		SAY("ERROR: peasycap->purb_audio_head is NULL\n");
+		return -EFAULT;
+	}
+} else {
+	JOT(8, "%i=audio_isoc_streaming, no audio urbs killed\n", \
+					peasycap->audio_isoc_streaming);
+}
+return 0;
+}
+/*****************************************************************************/
diff --git a/drivers/staging/easycap/easycap_sound.h b/drivers/staging/easycap/easycap_sound.h
new file mode 100644
index 00000000000..49127396902
--- /dev/null
+++ b/drivers/staging/easycap/easycap_sound.h
@@ -0,0 +1,28 @@
+/*****************************************************************************
+*                                                                            *
+*  easycap_sound.h                                                           *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+extern struct easycap *peasycap;
+extern struct usb_driver easycap_usb_driver;
diff --git a/drivers/staging/easycap/easycap_standard.h b/drivers/staging/easycap/easycap_standard.h
new file mode 100644
index 00000000000..cadc8d27a85
--- /dev/null
+++ b/drivers/staging/easycap/easycap_standard.h
@@ -0,0 +1,27 @@
+/*****************************************************************************
+*                                                                            *
+*  easycap_standard.h                                                        *
+*                                                                            *
+*****************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+extern struct easycap_standard easycap_standard[];
diff --git a/drivers/staging/easycap/easycap_testcard.c b/drivers/staging/easycap/easycap_testcard.c
new file mode 100644
index 00000000000..3c2ce28fab9
--- /dev/null
+++ b/drivers/staging/easycap/easycap_testcard.c
@@ -0,0 +1,392 @@
+/******************************************************************************
+*                                                                             *
+*  easycap_testcard.c                                                         *
+*                                                                             *
+******************************************************************************/
+/*
+ *
+ *  Copyright (C) 2010 R.M. Thomas  <rmthomas@sciolus.org>
+ *
+ *
+ *  This is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  The software is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this software; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+/*****************************************************************************/
+
+#include "easycap.h"
+#include "easycap_debug.h"
+
+/*****************************************************************************/
+#define TESTCARD_BYTESPERLINE (2 * 1440)
+void
+easycap_testcard(struct easycap *peasycap, int field_fill)
+{
+int total;
+int y, u, v, r, g, b;
+unsigned char uyvy[4];
+
+int i1, line, k, m, n, more, much, barwidth;
+unsigned char bfbar[TESTCARD_BYTESPERLINE / 8], *p1, *p2;
+struct data_buffer *pfield_buffer;
+
+JOT(8, "%i=field_fill\n", field_fill);
+
+if ((TESTCARD_BYTESPERLINE / 2) < peasycap->width) {
+	SAY("ERROR: image is too wide\n");
+	return;
+}
+if (peasycap->width % 16) {
+	SAY("ERROR: indivisible image width\n");
+	return;
+}
+
+total = 0;
+barwidth = (2 * peasycap->width) / 8;
+
+k = field_fill;
+m = 0;
+n = 0;
+
+for (line = 0;  line < (peasycap->height / 2);  line++) {
+	for (i1 = 0;  i1 < 8;  i1++) {
+		r = (i1 * 256)/8;
+		g = (i1 * 256)/8;
+		b = (i1 * 256)/8;
+
+		y =  299*r/1000 + 587*g/1000 + 114*b/1000 ;
+		u = -147*r/1000 - 289*g/1000 + 436*b/1000 ;  u = u + 128;
+		v =  615*r/1000 - 515*g/1000 - 100*b/1000 ;  v = v + 128;
+
+		uyvy[0] =  0xFF & u ;
+		uyvy[1] =  0xFF & y ;
+		uyvy[2] =  0xFF & v ;
+		uyvy[3] =  0xFF & y ;
+
+		p1 = &bfbar[0];
+		while (p1 < &bfbar[barwidth]) {
+			*p1++ = uyvy[0] ;
+			*p1++ = uyvy[1] ;
+			*p1++ = uyvy[2] ;
+			*p1++ = uyvy[3] ;
+			total += 4;
+			}
+
+		p1 = &bfbar[0];
+		more = barwidth;
+
+		while (more) {
+			if ((FIELD_BUFFER_SIZE/PAGE_SIZE) <= m) {
+				SAY("ERROR:  bad m reached\n");
+				return;
+			}
+		if (PAGE_SIZE < n) {
+			SAY("ERROR:  bad n reached\n"); return;
+		}
+
+		if (0 > more) {
+			SAY("ERROR:  internal fault\n");
+			return;
+		}
+
+		much = PAGE_SIZE - n;
+		if (much > more)
+			much = more;
+		pfield_buffer = &peasycap->field_buffer[k][m];
+		p2 = pfield_buffer->pgo + n;
+		memcpy(p2, p1, much);
+
+		p1 += much;
+		n += much;
+		more -= much;
+		if (PAGE_SIZE == n) {
+			m++;
+			n = 0;
+			}
+		}
+	}
+}
+
+JOT(8, "%i=total\n", total);
+if (total != peasycap->width * peasycap->height)
+	SAY("ERROR: wrong number of bytes written:  %i\n", total);
+return;
+}
+/*****************************************************************************/
+#if defined(EASYCAP_TESTTONE)
+/*-----------------------------------------------------------------------------
+THE tones[] ARRAY BELOW IS THE OUTPUT OF THIS PROGRAM,
+COMPILED gcc -o prog -lm prog.c
+- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+#include <stdio.h>
+#include <math.h>
+
+int main(void);
+int
+main(void)
+{
+int i1, i2, last;
+double d1, d2;
+
+last = 1024 - 1;
+d1 = 10.0*3.14159265/1024.0;
+printf("int tones[2048] =\n{\n");
+for (i1 = 0;  i1 <= last;  i1++)
+	{
+	d2 = ((double)i1) * d1;
+	i2 = (int)(16384.0*sin(d2));
+
+	if (last != i1)
+		{
+		printf("%6i, ", i2);  printf("%6i, ", i2);
+		if (!((i1 + 1)%5)) printf("\n");
+		}
+	else
+		{
+		printf("%6i, ", i2);  printf("%6i\n};\n", i2);
+		}
+	}
+return(0);
+}
+-----------------------------------------------------------------------------*/
+int tones[2048] = {
+     0,     0,   502,   502,  1004,  1004,  1505,  1505,  2005,  2005,
+  2503,  2503,  2998,  2998,  3491,  3491,  3980,  3980,  4466,  4466,
+  4948,  4948,  5424,  5424,  5896,  5896,  6362,  6362,  6822,  6822,
+  7276,  7276,  7723,  7723,  8162,  8162,  8594,  8594,  9018,  9018,
+  9434,  9434,  9840,  9840, 10237, 10237, 10625, 10625, 11002, 11002,
+ 11370, 11370, 11726, 11726, 12072, 12072, 12406, 12406, 12728, 12728,
+ 13038, 13038, 13337, 13337, 13622, 13622, 13895, 13895, 14155, 14155,
+ 14401, 14401, 14634, 14634, 14853, 14853, 15058, 15058, 15249, 15249,
+ 15426, 15426, 15588, 15588, 15735, 15735, 15868, 15868, 15985, 15985,
+ 16088, 16088, 16175, 16175, 16248, 16248, 16305, 16305, 16346, 16346,
+ 16372, 16372, 16383, 16383, 16379, 16379, 16359, 16359, 16323, 16323,
+ 16272, 16272, 16206, 16206, 16125, 16125, 16028, 16028, 15917, 15917,
+ 15790, 15790, 15649, 15649, 15492, 15492, 15322, 15322, 15136, 15136,
+ 14937, 14937, 14723, 14723, 14496, 14496, 14255, 14255, 14001, 14001,
+ 13733, 13733, 13452, 13452, 13159, 13159, 12854, 12854, 12536, 12536,
+ 12207, 12207, 11866, 11866, 11513, 11513, 11150, 11150, 10777, 10777,
+ 10393, 10393, 10000, 10000,  9597,  9597,  9185,  9185,  8765,  8765,
+  8336,  8336,  7900,  7900,  7456,  7456,  7005,  7005,  6547,  6547,
+  6083,  6083,  5614,  5614,  5139,  5139,  4659,  4659,  4175,  4175,
+  3687,  3687,  3196,  3196,  2701,  2701,  2204,  2204,  1705,  1705,
+  1205,  1205,   703,   703,   201,   201,  -301,  -301,  -803,  -803,
+ -1305, -1305, -1805, -1805, -2304, -2304, -2801, -2801, -3294, -3294,
+ -3785, -3785, -4272, -4272, -4756, -4756, -5234, -5234, -5708, -5708,
+ -6176, -6176, -6639, -6639, -7095, -7095, -7545, -7545, -7988, -7988,
+ -8423, -8423, -8850, -8850, -9268, -9268, -9679, -9679, -10079, -10079,
+-10471, -10471, -10853, -10853, -11224, -11224, -11585, -11585, -11935, -11935,
+-12273, -12273, -12600, -12600, -12916, -12916, -13219, -13219, -13510, -13510,
+-13788, -13788, -14053, -14053, -14304, -14304, -14543, -14543, -14767, -14767,
+-14978, -14978, -15175, -15175, -15357, -15357, -15525, -15525, -15678, -15678,
+-15817, -15817, -15940, -15940, -16049, -16049, -16142, -16142, -16221, -16221,
+-16284, -16284, -16331, -16331, -16364, -16364, -16381, -16381, -16382, -16382,
+-16368, -16368, -16339, -16339, -16294, -16294, -16234, -16234, -16159, -16159,
+-16069, -16069, -15963, -15963, -15842, -15842, -15707, -15707, -15557, -15557,
+-15392, -15392, -15212, -15212, -15018, -15018, -14810, -14810, -14589, -14589,
+-14353, -14353, -14104, -14104, -13842, -13842, -13566, -13566, -13278, -13278,
+-12977, -12977, -12665, -12665, -12340, -12340, -12003, -12003, -11656, -11656,
+-11297, -11297, -10928, -10928, -10548, -10548, -10159, -10159, -9759, -9759,
+ -9351, -9351, -8934, -8934, -8509, -8509, -8075, -8075, -7634, -7634,
+ -7186, -7186, -6731, -6731, -6269, -6269, -5802, -5802, -5329, -5329,
+ -4852, -4852, -4369, -4369, -3883, -3883, -3393, -3393, -2900, -2900,
+ -2404, -2404, -1905, -1905, -1405, -1405,  -904,  -904,  -402,  -402,
+   100,   100,   603,   603,  1105,  1105,  1605,  1605,  2105,  2105,
+  2602,  2602,  3097,  3097,  3589,  3589,  4078,  4078,  4563,  4563,
+  5043,  5043,  5519,  5519,  5990,  5990,  6455,  6455,  6914,  6914,
+  7366,  7366,  7811,  7811,  8249,  8249,  8680,  8680,  9102,  9102,
+  9516,  9516,  9920,  9920, 10315, 10315, 10701, 10701, 11077, 11077,
+ 11442, 11442, 11796, 11796, 12139, 12139, 12471, 12471, 12791, 12791,
+ 13099, 13099, 13395, 13395, 13678, 13678, 13948, 13948, 14205, 14205,
+ 14449, 14449, 14679, 14679, 14895, 14895, 15098, 15098, 15286, 15286,
+ 15459, 15459, 15618, 15618, 15763, 15763, 15892, 15892, 16007, 16007,
+ 16107, 16107, 16191, 16191, 16260, 16260, 16314, 16314, 16353, 16353,
+ 16376, 16376, 16384, 16384, 16376, 16376, 16353, 16353, 16314, 16314,
+ 16260, 16260, 16191, 16191, 16107, 16107, 16007, 16007, 15892, 15892,
+ 15763, 15763, 15618, 15618, 15459, 15459, 15286, 15286, 15098, 15098,
+ 14895, 14895, 14679, 14679, 14449, 14449, 14205, 14205, 13948, 13948,
+ 13678, 13678, 13395, 13395, 13099, 13099, 12791, 12791, 12471, 12471,
+ 12139, 12139, 11796, 11796, 11442, 11442, 11077, 11077, 10701, 10701,
+ 10315, 10315,  9920,  9920,  9516,  9516,  9102,  9102,  8680,  8680,
+  8249,  8249,  7811,  7811,  7366,  7366,  6914,  6914,  6455,  6455,
+  5990,  5990,  5519,  5519,  5043,  5043,  4563,  4563,  4078,  4078,
+  3589,  3589,  3097,  3097,  2602,  2602,  2105,  2105,  1605,  1605,
+  1105,  1105,   603,   603,   100,   100,  -402,  -402,  -904,  -904,
+ -1405, -1405, -1905, -1905, -2404, -2404, -2900, -2900, -3393, -3393,
+ -3883, -3883, -4369, -4369, -4852, -4852, -5329, -5329, -5802, -5802,
+ -6269, -6269, -6731, -6731, -7186, -7186, -7634, -7634, -8075, -8075,
+ -8509, -8509, -8934, -8934, -9351, -9351, -9759, -9759, -10159, -10159,
+-10548, -10548, -10928, -10928, -11297, -11297, -11656, -11656, -12003, -12003,
+-12340, -12340, -12665, -12665, -12977, -12977, -13278, -13278, -13566, -13566,
+-13842, -13842, -14104, -14104, -14353, -14353, -14589, -14589, -14810, -14810,
+-15018, -15018, -15212, -15212, -15392, -15392, -15557, -15557, -15707, -15707,
+-15842, -15842, -15963, -15963, -16069, -16069, -16159, -16159, -16234, -16234,
+-16294, -16294, -16339, -16339, -16368, -16368, -16382, -16382, -16381, -16381,
+-16364, -16364, -16331, -16331, -16284, -16284, -16221, -16221, -16142, -16142,
+-16049, -16049, -15940, -15940, -15817, -15817, -15678, -15678, -15525, -15525,
+-15357, -15357, -15175, -15175, -14978, -14978, -14767, -14767, -14543, -14543,
+-14304, -14304, -14053, -14053, -13788, -13788, -13510, -13510, -13219, -13219,
+-12916, -12916, -12600, -12600, -12273, -12273, -11935, -11935, -11585, -11585,
+-11224, -11224, -10853, -10853, -10471, -10471, -10079, -10079, -9679, -9679,
+ -9268, -9268, -8850, -8850, -8423, -8423, -7988, -7988, -7545, -7545,
+ -7095, -7095, -6639, -6639, -6176, -6176, -5708, -5708, -5234, -5234,
+ -4756, -4756, -4272, -4272, -3785, -3785, -3294, -3294, -2801, -2801,
+ -2304, -2304, -1805, -1805, -1305, -1305,  -803,  -803,  -301,  -301,
+   201,   201,   703,   703,  1205,  1205,  1705,  1705,  2204,  2204,
+  2701,  2701,  3196,  3196,  3687,  3687,  4175,  4175,  4659,  4659,
+  5139,  5139,  5614,  5614,  6083,  6083,  6547,  6547,  7005,  7005,
+  7456,  7456,  7900,  7900,  8336,  8336,  8765,  8765,  9185,  9185,
+  9597,  9597, 10000, 10000, 10393, 10393, 10777, 10777, 11150, 11150,
+ 11513, 11513, 11866, 11866, 12207, 12207, 12536, 12536, 12854, 12854,
+ 13159, 13159, 13452, 13452, 13733, 13733, 14001, 14001, 14255, 14255,
+ 14496, 14496, 14723, 14723, 14937, 14937, 15136, 15136, 15322, 15322,
+ 15492, 15492, 15649, 15649, 15790, 15790, 15917, 15917, 16028, 16028,
+ 16125, 16125, 16206, 16206, 16272, 16272, 16323, 16323, 16359, 16359,
+ 16379, 16379, 16383, 16383, 16372, 16372, 16346, 16346, 16305, 16305,
+ 16248, 16248, 16175, 16175, 16088, 16088, 15985, 15985, 15868, 15868,
+ 15735, 15735, 15588, 15588, 15426, 15426, 15249, 15249, 15058, 15058,
+ 14853, 14853, 14634, 14634, 14401, 14401, 14155, 14155, 13895, 13895,
+ 13622, 13622, 13337, 13337, 13038, 13038, 12728, 12728, 12406, 12406,
+ 12072, 12072, 11726, 11726, 11370, 11370, 11002, 11002, 10625, 10625,
+ 10237, 10237,  9840,  9840,  9434,  9434,  9018,  9018,  8594,  8594,
+  8162,  8162,  7723,  7723,  7276,  7276,  6822,  6822,  6362,  6362,
+  5896,  5896,  5424,  5424,  4948,  4948,  4466,  4466,  3980,  3980,
+  3491,  3491,  2998,  2998,  2503,  2503,  2005,  2005,  1505,  1505,
+  1004,  1004,   502,   502,     0,     0,  -502,  -502, -1004, -1004,
+ -1505, -1505, -2005, -2005, -2503, -2503, -2998, -2998, -3491, -3491,
+ -3980, -3980, -4466, -4466, -4948, -4948, -5424, -5424, -5896, -5896,
+ -6362, -6362, -6822, -6822, -7276, -7276, -7723, -7723, -8162, -8162,
+ -8594, -8594, -9018, -9018, -9434, -9434, -9840, -9840, -10237, -10237,
+-10625, -10625, -11002, -11002, -11370, -11370, -11726, -11726, -12072, -12072,
+-12406, -12406, -12728, -12728, -13038, -13038, -13337, -13337, -13622, -13622,
+-13895, -13895, -14155, -14155, -14401, -14401, -14634, -14634, -14853, -14853,
+-15058, -15058, -15249, -15249, -15426, -15426, -15588, -15588, -15735, -15735,
+-15868, -15868, -15985, -15985, -16088, -16088, -16175, -16175, -16248, -16248,
+-16305, -16305, -16346, -16346, -16372, -16372, -16383, -16383, -16379, -16379,
+-16359, -16359, -16323, -16323, -16272, -16272, -16206, -16206, -16125, -16125,
+-16028, -16028, -15917, -15917, -15790, -15790, -15649, -15649, -15492, -15492,
+-15322, -15322, -15136, -15136, -14937, -14937, -14723, -14723, -14496, -14496,
+-14255, -14255, -14001, -14001, -13733, -13733, -13452, -13452, -13159, -13159,
+-12854, -12854, -12536, -12536, -12207, -12207, -11866, -11866, -11513, -11513,
+-11150, -11150, -10777, -10777, -10393, -10393, -10000, -10000, -9597, -9597,
+ -9185, -9185, -8765, -8765, -8336, -8336, -7900, -7900, -7456, -7456,
+ -7005, -7005, -6547, -6547, -6083, -6083, -5614, -5614, -5139, -5139,
+ -4659, -4659, -4175, -4175, -3687, -3687, -3196, -3196, -2701, -2701,
+ -2204, -2204, -1705, -1705, -1205, -1205,  -703,  -703,  -201,  -201,
+   301,   301,   803,   803,  1305,  1305,  1805,  1805,  2304,  2304,
+  2801,  2801,  3294,  3294,  3785,  3785,  4272,  4272,  4756,  4756,
+  5234,  5234,  5708,  5708,  6176,  6176,  6639,  6639,  7095,  7095,
+  7545,  7545,  7988,  7988,  8423,  8423,  8850,  8850,  9268,  9268,
+  9679,  9679, 10079, 10079, 10471, 10471, 10853, 10853, 11224, 11224,
+ 11585, 11585, 11935, 11935, 12273, 12273, 12600, 12600, 12916, 12916,
+ 13219, 13219, 13510, 13510, 13788, 13788, 14053, 14053, 14304, 14304,
+ 14543, 14543, 14767, 14767, 14978, 14978, 15175, 15175, 15357, 15357,
+ 15525, 15525, 15678, 15678, 15817, 15817, 15940, 15940, 16049, 16049,
+ 16142, 16142, 16221, 16221, 16284, 16284, 16331, 16331, 16364, 16364,
+ 16381, 16381, 16382, 16382, 16368, 16368, 16339, 16339, 16294, 16294,
+ 16234, 16234, 16159, 16159, 16069, 16069, 15963, 15963, 15842, 15842,
+ 15707, 15707, 15557, 15557, 15392, 15392, 15212, 15212, 15018, 15018,
+ 14810, 14810, 14589, 14589, 14353, 14353, 14104, 14104, 13842, 13842,
+ 13566, 13566, 13278, 13278, 12977, 12977, 12665, 12665, 12340, 12340,
+ 12003, 12003, 11656, 11656, 11297, 11297, 10928, 10928, 10548, 10548,
+ 10159, 10159,  9759,  9759,  9351,  9351,  8934,  8934,  8509,  8509,
+  8075,  8075,  7634,  7634,  7186,  7186,  6731,  6731,  6269,  6269,
+  5802,  5802,  5329,  5329,  4852,  4852,  4369,  4369,  3883,  3883,
+  3393,  3393,  2900,  2900,  2404,  2404,  1905,  1905,  1405,  1405,
+   904,   904,   402,   402,  -100,  -100,  -603,  -603, -1105, -1105,
+ -1605, -1605, -2105, -2105, -2602, -2602, -3097, -3097, -3589, -3589,
+ -4078, -4078, -4563, -4563, -5043, -5043, -5519, -5519, -5990, -5990,
+ -6455, -6455, -6914, -6914, -7366, -7366, -7811, -7811, -8249, -8249,
+ -8680, -8680, -9102, -9102, -9516, -9516, -9920, -9920, -10315, -10315,
+-10701, -10701, -11077, -11077, -11442, -11442, -11796, -11796, -12139, -12139,
+-12471, -12471, -12791, -12791, -13099, -13099, -13395, -13395, -13678, -13678,
+-13948, -13948, -14205, -14205, -14449, -14449, -14679, -14679, -14895, -14895,
+-15098, -15098, -15286, -15286, -15459, -15459, -15618, -15618, -15763, -15763,
+-15892, -15892, -16007, -16007, -16107, -16107, -16191, -16191, -16260, -16260,
+-16314, -16314, -16353, -16353, -16376, -16376, -16383, -16383, -16376, -16376,
+-16353, -16353, -16314, -16314, -16260, -16260, -16191, -16191, -16107, -16107,
+-16007, -16007, -15892, -15892, -15763, -15763, -15618, -15618, -15459, -15459,
+-15286, -15286, -15098, -15098, -14895, -14895, -14679, -14679, -14449, -14449,
+-14205, -14205, -13948, -13948, -13678, -13678, -13395, -13395, -13099, -13099,
+-12791, -12791, -12471, -12471, -12139, -12139, -11796, -11796, -11442, -11442,
+-11077, -11077, -10701, -10701, -10315, -10315, -9920, -9920, -9516, -9516,
+ -9102, -9102, -8680, -8680, -8249, -8249, -7811, -7811, -7366, -7366,
+ -6914, -6914, -6455, -6455, -5990, -5990, -5519, -5519, -5043, -5043,
+ -4563, -4563, -4078, -4078, -3589, -3589, -3097, -3097, -2602, -2602,
+ -2105, -2105, -1605, -1605, -1105, -1105,  -603,  -603,  -100,  -100,
+   402,   402,   904,   904,  1405,  1405,  1905,  1905,  2404,  2404,
+  2900,  2900,  3393,  3393,  3883,  3883,  4369,  4369,  4852,  4852,
+  5329,  5329,  5802,  5802,  6269,  6269,  6731,  6731,  7186,  7186,
+  7634,  7634,  8075,  8075,  8509,  8509,  8934,  8934,  9351,  9351,
+  9759,  9759, 10159, 10159, 10548, 10548, 10928, 10928, 11297, 11297,
+ 11656, 11656, 12003, 12003, 12340, 12340, 12665, 12665, 12977, 12977,
+ 13278, 13278, 13566, 13566, 13842, 13842, 14104, 14104, 14353, 14353,
+ 14589, 14589, 14810, 14810, 15018, 15018, 15212, 15212, 15392, 15392,
+ 15557, 15557, 15707, 15707, 15842, 15842, 15963, 15963, 16069, 16069,
+ 16159, 16159, 16234, 16234, 16294, 16294, 16339, 16339, 16368, 16368,
+ 16382, 16382, 16381, 16381, 16364, 16364, 16331, 16331, 16284, 16284,
+ 16221, 16221, 16142, 16142, 16049, 16049, 15940, 15940, 15817, 15817,
+ 15678, 15678, 15525, 15525, 15357, 15357, 15175, 15175, 14978, 14978,
+ 14767, 14767, 14543, 14543, 14304, 14304, 14053, 14053, 13788, 13788,
+ 13510, 13510, 13219, 13219, 12916, 12916, 12600, 12600, 12273, 12273,
+ 11935, 11935, 11585, 11585, 11224, 11224, 10853, 10853, 10471, 10471,
+ 10079, 10079,  9679,  9679,  9268,  9268,  8850,  8850,  8423,  8423,
+  7988,  7988,  7545,  7545,  7095,  7095,  6639,  6639,  6176,  6176,
+  5708,  5708,  5234,  5234,  4756,  4756,  4272,  4272,  3785,  3785,
+  3294,  3294,  2801,  2801,  2304,  2304,  1805,  1805,  1305,  1305,
+   803,   803,   301,   301,  -201,  -201,  -703,  -703, -1205, -1205,
+ -1705, -1705, -2204, -2204, -2701, -2701, -3196, -3196, -3687, -3687,
+ -4175, -4175, -4659, -4659, -5139, -5139, -5614, -5614, -6083, -6083,
+ -6547, -6547, -7005, -7005, -7456, -7456, -7900, -7900, -8336, -8336,
+ -8765, -8765, -9185, -9185, -9597, -9597, -10000, -10000, -10393, -10393,
+-10777, -10777, -11150, -11150, -11513, -11513, -11866, -11866, -12207, -12207,
+-12536, -12536, -12854, -12854, -13159, -13159, -13452, -13452, -13733, -13733,
+-14001, -14001, -14255, -14255, -14496, -14496, -14723, -14723, -14937, -14937,
+-15136, -15136, -15322, -15322, -15492, -15492, -15649, -15649, -15790, -15790,
+-15917, -15917, -16028, -16028, -16125, -16125, -16206, -16206, -16272, -16272,
+-16323, -16323, -16359, -16359, -16379, -16379, -16383, -16383, -16372, -16372,
+-16346, -16346, -16305, -16305, -16248, -16248, -16175, -16175, -16088, -16088,
+-15985, -15985, -15868, -15868, -15735, -15735, -15588, -15588, -15426, -15426,
+-15249, -15249, -15058, -15058, -14853, -14853, -14634, -14634, -14401, -14401,
+-14155, -14155, -13895, -13895, -13622, -13622, -13337, -13337, -13038, -13038,
+-12728, -12728, -12406, -12406, -12072, -12072, -11726, -11726, -11370, -11370,
+-11002, -11002, -10625, -10625, -10237, -10237, -9840, -9840, -9434, -9434,
+ -9018, -9018, -8594, -8594, -8162, -8162, -7723, -7723, -7276, -7276,
+ -6822, -6822, -6362, -6362, -5896, -5896, -5424, -5424, -4948, -4948,
+ -4466, -4466, -3980, -3980, -3491, -3491, -2998, -2998, -2503, -2503,
+ -2005, -2005, -1505, -1505, -1004, -1004,  -502,  -502
+};
+/*****************************************************************************/
+void
+easysnd_testtone(struct easycap *peasycap, int audio_fill)
+{
+int i1;
+unsigned char *p2;
+struct data_buffer *paudio_buffer;
+
+JOT(8, "%i=audio_fill\n", audio_fill);
+
+paudio_buffer = &peasycap->audio_buffer[audio_fill];
+
+p2 = (unsigned char *)(paudio_buffer->pgo);
+for (i1 = 0;  i1 < PAGE_SIZE;  i1 += 4, p2 += 4) {
+	*p2       = (unsigned char) (0x00FF & tones[i1/2]);
+	*(p2 + 1) = (unsigned char)((0xFF00 & tones[i1/2]) >> 8);
+	*(p2 + 2) = (unsigned char) (0x00FF & tones[i1/2 + 1]);
+	*(p2 + 3) = (unsigned char)((0xFF00 & tones[i1/2 + 1]) >> 8);
+	}
+return;
+}
+#endif /*EASYCAP_TESTTONE*/
+/*****************************************************************************/
diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c
index a6d9f29ff49..21c5eeec62d 100644
--- a/drivers/staging/et131x/et1310_phy.c
+++ b/drivers/staging/et131x/et1310_phy.c
@@ -760,7 +760,8 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
 			if (etdev->linkspeed == TRUEPHY_SPEED_10MBPS) {
 				/* NOTE - Is there a way to query this without
 				 * TruePHY?
-				 * && TRU_QueryCoreType(etdev->hTruePhy, 0) == EMI_TRUEPHY_A13O) {
+				 * && TRU_QueryCoreType(etdev->hTruePhy, 0) ==
+				 * EMI_TRUEPHY_A13O) {
 				 */
 				u16 Register18;
 
@@ -778,7 +779,7 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
 			 * in the LinkDetectionDPC).
 			 */
 			if (!(etdev->Flags & fMP_ADAPTER_LINK_DETECTION) ||
-			  (etdev->MediaState == NETIF_STATUS_MEDIA_DISCONNECT)) {
+			 (etdev->MediaState == NETIF_STATUS_MEDIA_DISCONNECT)) {
 				spin_lock_irqsave(&etdev->Lock, flags);
 				etdev->MediaState =
 				    NETIF_STATUS_MEDIA_DISCONNECT;
@@ -836,7 +837,8 @@ void et131x_Mii_check(struct et131x_adapter *etdev,
 				/*
 				 * NOTE - Is there a way to query this without
 				 * TruePHY?
-				 * && TRU_QueryCoreType(etdev->hTruePhy, 0)== EMI_TRUEPHY_A13O) {
+				 * && TRU_QueryCoreType(etdev->hTruePhy, 0)==
+				 * EMI_TRUEPHY_A13O) {
 				 */
 				u16 Register18;
 
diff --git a/drivers/staging/hv/Kconfig b/drivers/staging/hv/Kconfig
index 97480f5c659..7455c804962 100644
--- a/drivers/staging/hv/Kconfig
+++ b/drivers/staging/hv/Kconfig
@@ -17,7 +17,7 @@ config HYPERV_STORAGE
 
 config HYPERV_BLOCK
 	tristate "Microsoft Hyper-V virtual block driver"
-	depends on BLOCK && SCSI && LBDAF
+	depends on BLOCK && SCSI && (LBDAF || 64BIT)
 	default HYPERV
 	help
 	  Select this option to enable the Hyper-V virtual block driver.
diff --git a/drivers/staging/hv/Makefile b/drivers/staging/hv/Makefile
index 1866f80a45d..b63515c20f5 100644
--- a/drivers/staging/hv/Makefile
+++ b/drivers/staging/hv/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_HYPERV)		+= hv_vmbus.o
+obj-$(CONFIG_HYPERV)		+= hv_vmbus.o hv_timesource.o
 obj-$(CONFIG_HYPERV_STORAGE)	+= hv_storvsc.o
 obj-$(CONFIG_HYPERV_BLOCK)	+= hv_blkvsc.o
 obj-$(CONFIG_HYPERV_NET)	+= hv_netvsc.o
diff --git a/drivers/staging/hv/blkvsc.c b/drivers/staging/hv/blkvsc.c
index 0daebc472e6..929238a6ce8 100644
--- a/drivers/staging/hv/blkvsc.c
+++ b/drivers/staging/hv/blkvsc.c
@@ -40,15 +40,11 @@ static int BlkVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 	struct storvsc_device_info *deviceInfo;
 	int ret = 0;
 
-	DPRINT_ENTER(BLKVSC);
-
 	deviceInfo = (struct storvsc_device_info *)AdditionalInfo;
 
 	ret = StorVscOnDeviceAdd(Device, AdditionalInfo);
-	if (ret != 0) {
-		DPRINT_EXIT(BLKVSC);
+	if (ret != 0)
 		return ret;
-	}
 
 	/*
 	 * We need to use the device instance guid to set the path and target
@@ -63,8 +59,6 @@ static int BlkVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 	deviceInfo->TargetId = Device->deviceInstance.data[5] << 8 |
 			       Device->deviceInstance.data[4];
 
-	DPRINT_EXIT(BLKVSC);
-
 	return ret;
 }
 
@@ -73,8 +67,6 @@ int BlkVscInitialize(struct hv_driver *Driver)
 	struct storvsc_driver_object *storDriver;
 	int ret = 0;
 
-	DPRINT_ENTER(BLKVSC);
-
 	storDriver = (struct storvsc_driver_object *)Driver;
 
 	/* Make sure we are at least 2 pages since 1 page is used for control */
@@ -106,7 +98,5 @@ int BlkVscInitialize(struct hv_driver *Driver)
 	storDriver->Base.OnCleanup = StorVscOnCleanup;
 	storDriver->OnIORequest	= StorVscOnIORequest;
 
-	DPRINT_EXIT(BLKVSC);
-
 	return ret;
 }
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index 61bd0be5fb1..f7ea2a3efed 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -175,8 +175,6 @@ static int blkvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	struct driver_context *drv_ctx = &g_blkvsc_drv.drv_ctx;
 	int ret;
 
-	DPRINT_ENTER(BLKVSC_DRV);
-
 	vmbus_get_interface(&storvsc_drv_obj->Base.VmbusChannelInterface);
 
 	storvsc_drv_obj->RingBufferSize = blkvsc_ringbuffer_size;
@@ -195,8 +193,6 @@ static int blkvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	/* The driver belongs to vmbus */
 	ret = vmbus_child_driver_register(drv_ctx);
 
-	DPRINT_EXIT(BLKVSC_DRV);
-
 	return ret;
 }
 
@@ -214,8 +210,6 @@ static void blkvsc_drv_exit(void)
 	struct device *current_dev;
 	int ret;
 
-	DPRINT_ENTER(BLKVSC_DRV);
-
 	while (1) {
 		current_dev = NULL;
 
@@ -241,8 +235,6 @@ static void blkvsc_drv_exit(void)
 
 	vmbus_child_driver_unregister(drv_ctx);
 
-	DPRINT_EXIT(BLKVSC_DRV);
-
 	return;
 }
 
@@ -268,8 +260,6 @@ static int blkvsc_probe(struct device *device)
 	static int ide0_registered;
 	static int ide1_registered;
 
-	DPRINT_ENTER(BLKVSC_DRV);
-
 	DPRINT_DBG(BLKVSC_DRV, "blkvsc_probe - enter");
 
 	if (!storvsc_drv_obj->Base.OnDeviceAdd) {
@@ -413,8 +403,6 @@ Cleanup:
 		blkdev = NULL;
 	}
 
-	DPRINT_EXIT(BLKVSC_DRV);
-
 	return ret;
 }
 
@@ -751,14 +739,10 @@ static int blkvsc_remove(struct device *device)
 	unsigned long flags;
 	int ret;
 
-	DPRINT_ENTER(BLKVSC_DRV);
-
 	DPRINT_DBG(BLKVSC_DRV, "blkvsc_remove()\n");
 
-	if (!storvsc_drv_obj->Base.OnDeviceRemove) {
-		DPRINT_EXIT(BLKVSC_DRV);
+	if (!storvsc_drv_obj->Base.OnDeviceRemove)
 		return -1;
-	}
 
 	/*
 	 * Call to the vsc driver to let it know that the device is being
@@ -802,8 +786,6 @@ static int blkvsc_remove(struct device *device)
 
 	kfree(blkdev);
 
-	DPRINT_EXIT(BLKVSC_DRV);
-
 	return ret;
 }
 
@@ -1492,22 +1474,16 @@ static int __init blkvsc_init(void)
 
 	BUILD_BUG_ON(sizeof(sector_t) != 8);
 
-	DPRINT_ENTER(BLKVSC_DRV);
-
 	DPRINT_INFO(BLKVSC_DRV, "Blkvsc initializing....");
 
 	ret = blkvsc_drv_init(BlkVscInitialize);
 
-	DPRINT_EXIT(BLKVSC_DRV);
-
 	return ret;
 }
 
 static void __exit blkvsc_exit(void)
 {
-	DPRINT_ENTER(BLKVSC_DRV);
 	blkvsc_drv_exit();
-	DPRINT_ENTER(BLKVSC_DRV);
 }
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/hv/channel.c b/drivers/staging/hv/channel.c
index f047c5a7f64..fece30c303a 100644
--- a/drivers/staging/hv/channel.c
+++ b/drivers/staging/hv/channel.c
@@ -74,8 +74,6 @@ static void VmbusChannelSetEvent(struct vmbus_channel *Channel)
 {
 	struct hv_monitor_page *monitorPage;
 
-	DPRINT_ENTER(VMBUS);
-
 	if (Channel->OfferMsg.MonitorAllocated) {
 		/* Each u32 represents 32 channels */
 		set_bit(Channel->OfferMsg.ChildRelId & 31,
@@ -92,8 +90,6 @@ static void VmbusChannelSetEvent(struct vmbus_channel *Channel)
 	} else {
 		VmbusSetEvent(Channel->OfferMsg.ChildRelId);
 	}
-
-	DPRINT_EXIT(VMBUS);
 }
 
 #if 0
@@ -101,8 +97,6 @@ static void VmbusChannelClearEvent(struct vmbus_channel *channel)
 {
 	struct hv_monitor_page *monitorPage;
 
-	DPRINT_ENTER(VMBUS);
-
 	if (Channel->OfferMsg.MonitorAllocated) {
 		/* Each u32 represents 32 channels */
 		clear_bit(Channel->OfferMsg.ChildRelId & 31,
@@ -117,8 +111,6 @@ static void VmbusChannelClearEvent(struct vmbus_channel *channel)
 			  (unsigned long *)&monitorPage->TriggerGroup
 					[Channel->MonitorGroup].Pending);
 	}
-
-	DPRINT_EXIT(VMBUS);
 }
 
 #endif
@@ -180,8 +172,6 @@ int VmbusChannelOpen(struct vmbus_channel *NewChannel, u32 SendRingBufferSize,
 	unsigned long flags;
 	int ret, err = 0;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Aligned to page size */
 	/* ASSERT(!(SendRingBufferSize & (PAGE_SIZE - 1))); */
 	/* ASSERT(!(RecvRingBufferSize & (PAGE_SIZE - 1))); */
@@ -305,9 +295,6 @@ Cleanup:
 
 	kfree(openInfo->WaitEvent);
 	kfree(openInfo);
-
-	DPRINT_EXIT(VMBUS);
-
 	return 0;
 
 errorout:
@@ -465,6 +452,8 @@ static int VmbusChannelCreateGpadlHeader(void *Kbuffer, u32 Size,
 			  sizeof(struct vmbus_channel_gpadl_header) +
 			  sizeof(struct gpa_range) + pageCount * sizeof(u64);
 		msgHeader = kzalloc(msgSize, GFP_KERNEL);
+		if (msgHeader == NULL)
+			goto nomem;
 		msgHeader->MessageSize = msgSize;
 
 		gpaHeader = (struct vmbus_channel_gpadl_header *)msgHeader->Msg;
@@ -509,8 +498,6 @@ int VmbusChannelEstablishGpadl(struct vmbus_channel *Channel, void *Kbuffer,
 	unsigned long flags;
 	int ret = 0;
 
-	DPRINT_ENTER(VMBUS);
-
 	nextGpadlHandle = atomic_read(&gVmbusConnection.NextGpadlHandle);
 	atomic_inc(&gVmbusConnection.NextGpadlHandle);
 
@@ -592,9 +579,6 @@ Cleanup:
 
 	kfree(msgInfo->WaitEvent);
 	kfree(msgInfo);
-
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -608,8 +592,6 @@ int VmbusChannelTeardownGpadl(struct vmbus_channel *Channel, u32 GpadlHandle)
 	unsigned long flags;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* ASSERT(GpadlHandle != 0); */
 
 	info = kmalloc(sizeof(*info) +
@@ -650,9 +632,6 @@ int VmbusChannelTeardownGpadl(struct vmbus_channel *Channel, u32 GpadlHandle)
 
 	kfree(info->WaitEvent);
 	kfree(info);
-
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -666,8 +645,6 @@ void VmbusChannelClose(struct vmbus_channel *Channel)
 	unsigned long flags;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Stop callback and cancel the timer asap */
 	Channel->OnChannelCallback = NULL;
 	del_timer_sync(&Channel->poll_timer);
@@ -720,8 +697,6 @@ void VmbusChannelClose(struct vmbus_channel *Channel)
 
 		FreeVmbusChannel(Channel);
 	}
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /**
@@ -749,7 +724,6 @@ int VmbusChannelSendPacket(struct vmbus_channel *Channel, const void *Buffer,
 	u64 alignedData = 0;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
 	DPRINT_DBG(VMBUS, "channel %p buffer %p len %d",
 		   Channel, Buffer, BufferLen);
 
@@ -776,8 +750,6 @@ int VmbusChannelSendPacket(struct vmbus_channel *Channel, const void *Buffer,
 	if (ret == 0 && !GetRingBufferInterruptMask(&Channel->Outbound))
 		VmbusChannelSetEvent(Channel);
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 EXPORT_SYMBOL(VmbusChannelSendPacket);
@@ -800,8 +772,6 @@ int VmbusChannelSendPacketPageBuffer(struct vmbus_channel *Channel,
 	struct scatterlist bufferList[3];
 	u64 alignedData = 0;
 
-	DPRINT_ENTER(VMBUS);
-
 	if (PageCount > MAX_PAGE_BUFFER_COUNT)
 		return -EINVAL;
 
@@ -844,8 +814,6 @@ int VmbusChannelSendPacketPageBuffer(struct vmbus_channel *Channel,
 	if (ret == 0 && !GetRingBufferInterruptMask(&Channel->Outbound))
 		VmbusChannelSetEvent(Channel);
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -867,8 +835,6 @@ int VmbusChannelSendPacketMultiPageBuffer(struct vmbus_channel *Channel,
 	u32 PfnCount = NUM_PAGES_SPANNED(MultiPageBuffer->Offset,
 					 MultiPageBuffer->Length);
 
-	DPRINT_ENTER(VMBUS);
-
 	DumpVmbusChannel(Channel);
 
 	DPRINT_DBG(VMBUS, "data buffer - offset %u len %u pfn count %u",
@@ -914,8 +880,6 @@ int VmbusChannelSendPacketMultiPageBuffer(struct vmbus_channel *Channel,
 	if (ret == 0 && !GetRingBufferInterruptMask(&Channel->Outbound))
 		VmbusChannelSetEvent(Channel);
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -942,8 +906,6 @@ int VmbusChannelRecvPacket(struct vmbus_channel *Channel, void *Buffer,
 	int ret;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	*BufferActualLen = 0;
 	*RequestId = 0;
 
@@ -955,7 +917,6 @@ int VmbusChannelRecvPacket(struct vmbus_channel *Channel, void *Buffer,
 		spin_unlock_irqrestore(&Channel->inbound_lock, flags);
 
 		/* DPRINT_DBG(VMBUS, "nothing to read!!"); */
-		DPRINT_EXIT(VMBUS);
 		return 0;
 	}
 
@@ -977,8 +938,6 @@ int VmbusChannelRecvPacket(struct vmbus_channel *Channel, void *Buffer,
 
 		DPRINT_ERR(VMBUS, "buffer too small - got %d needs %d",
 			   BufferLen, userLen);
-		DPRINT_EXIT(VMBUS);
-
 		return -1;
 	}
 
@@ -990,8 +949,6 @@ int VmbusChannelRecvPacket(struct vmbus_channel *Channel, void *Buffer,
 
 	spin_unlock_irqrestore(&Channel->inbound_lock, flags);
 
-	DPRINT_EXIT(VMBUS);
-
 	return 0;
 }
 EXPORT_SYMBOL(VmbusChannelRecvPacket);
@@ -1009,8 +966,6 @@ int VmbusChannelRecvPacketRaw(struct vmbus_channel *Channel, void *Buffer,
 	int ret;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	*BufferActualLen = 0;
 	*RequestId = 0;
 
@@ -1022,7 +977,6 @@ int VmbusChannelRecvPacketRaw(struct vmbus_channel *Channel, void *Buffer,
 		spin_unlock_irqrestore(&Channel->inbound_lock, flags);
 
 		/* DPRINT_DBG(VMBUS, "nothing to read!!"); */
-		DPRINT_EXIT(VMBUS);
 		return 0;
 	}
 
@@ -1043,7 +997,6 @@ int VmbusChannelRecvPacketRaw(struct vmbus_channel *Channel, void *Buffer,
 
 		DPRINT_ERR(VMBUS, "buffer too small - needed %d bytes but "
 			   "got space for only %d bytes", packetLen, BufferLen);
-		DPRINT_EXIT(VMBUS);
 		return -2;
 	}
 
@@ -1053,9 +1006,6 @@ int VmbusChannelRecvPacketRaw(struct vmbus_channel *Channel, void *Buffer,
 	ret = RingBufferRead(&Channel->Inbound, Buffer, packetLen, 0);
 
 	spin_unlock_irqrestore(&Channel->inbound_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
-
 	return 0;
 }
 
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index 12db555a3a5..6ccf505e802 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -267,15 +267,11 @@ static inline void ReleaseVmbusChannel(void *context)
 {
 	struct vmbus_channel *channel = context;
 
-	DPRINT_ENTER(VMBUS);
-
 	DPRINT_DBG(VMBUS, "releasing channel (%p)", channel);
 	destroy_workqueue(channel->ControlWQ);
 	DPRINT_DBG(VMBUS, "channel released (%p)", channel);
 
 	kfree(channel);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -326,8 +322,6 @@ static void VmbusChannelProcessOffer(void *context)
 	int cnt;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Make sure this is a new offer */
 	spin_lock_irqsave(&gVmbusConnection.channel_lock, flags);
 
@@ -353,7 +347,6 @@ static void VmbusChannelProcessOffer(void *context)
 		DPRINT_DBG(VMBUS, "Ignoring duplicate offer for relid (%d)",
 			   newChannel->OfferMsg.ChildRelId);
 		FreeVmbusChannel(newChannel);
-		DPRINT_EXIT(VMBUS);
 		return;
 	}
 
@@ -410,7 +403,6 @@ static void VmbusChannelProcessOffer(void *context)
 			}
 		}
 	}
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -420,9 +412,7 @@ static void VmbusChannelProcessRescindOffer(void *context)
 {
 	struct vmbus_channel *channel = context;
 
-	DPRINT_ENTER(VMBUS);
 	VmbusChildDeviceRemove(channel->DeviceObject);
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -441,8 +431,6 @@ static void VmbusChannelOnOffer(struct vmbus_channel_message_header *hdr)
 	int i;
 	int fSupported = 0;
 
-	DPRINT_ENTER(VMBUS);
-
 	offer = (struct vmbus_channel_offer_channel *)hdr;
 	for (i = 0; i < MAX_NUM_DEVICE_CLASSES_SUPPORTED; i++) {
 		if (memcmp(&offer->Offer.InterfaceType,
@@ -455,7 +443,6 @@ static void VmbusChannelOnOffer(struct vmbus_channel_message_header *hdr)
 	if (!fSupported) {
 		DPRINT_DBG(VMBUS, "Ignoring channel offer notification for "
 			   "child relid %d", offer->ChildRelId);
-		DPRINT_EXIT(VMBUS);
 		return;
 	}
 
@@ -504,8 +491,6 @@ static void VmbusChannelOnOffer(struct vmbus_channel_message_header *hdr)
 	/* TODO: Make sure the offer comes from our parent partition */
 	osd_schedule_callback(newChannel->ControlWQ, VmbusChannelProcessOffer,
 			      newChannel);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -518,8 +503,6 @@ static void VmbusChannelOnOfferRescind(struct vmbus_channel_message_header *hdr)
 	struct vmbus_channel_rescind_offer *rescind;
 	struct vmbus_channel *channel;
 
-	DPRINT_ENTER(VMBUS);
-
 	rescind = (struct vmbus_channel_rescind_offer *)hdr;
 	channel = GetChannelFromRelId(rescind->ChildRelId);
 	if (channel == NULL) {
@@ -531,8 +514,6 @@ static void VmbusChannelOnOfferRescind(struct vmbus_channel_message_header *hdr)
 	osd_schedule_callback(channel->ControlWQ,
 			      VmbusChannelProcessRescindOffer,
 			      channel);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -543,8 +524,6 @@ static void VmbusChannelOnOfferRescind(struct vmbus_channel_message_header *hdr)
 static void VmbusChannelOnOffersDelivered(
 			struct vmbus_channel_message_header *hdr)
 {
-	DPRINT_ENTER(VMBUS);
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -563,8 +542,6 @@ static void VmbusChannelOnOpenResult(struct vmbus_channel_message_header *hdr)
 	struct vmbus_channel_open_channel *openMsg;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	result = (struct vmbus_channel_open_result *)hdr;
 	DPRINT_DBG(VMBUS, "vmbus open result - %d", result->Status);
 
@@ -591,8 +568,6 @@ static void VmbusChannelOnOpenResult(struct vmbus_channel_message_header *hdr)
 		}
 	}
 	spin_unlock_irqrestore(&gVmbusConnection.channelmsg_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -611,8 +586,6 @@ static void VmbusChannelOnGpadlCreated(struct vmbus_channel_message_header *hdr)
 	struct vmbus_channel_gpadl_header *gpadlHeader;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	gpadlCreated = (struct vmbus_channel_gpadl_created *)hdr;
 	DPRINT_DBG(VMBUS, "vmbus gpadl created result - %d",
 		   gpadlCreated->CreationStatus);
@@ -643,8 +616,6 @@ static void VmbusChannelOnGpadlCreated(struct vmbus_channel_message_header *hdr)
 		}
 	}
 	spin_unlock_irqrestore(&gVmbusConnection.channelmsg_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -664,8 +635,6 @@ static void VmbusChannelOnGpadlTorndown(
 	struct vmbus_channel_gpadl_teardown *gpadlTeardown;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	gpadlTorndown = (struct vmbus_channel_gpadl_torndown *)hdr;
 
 	/*
@@ -691,8 +660,6 @@ static void VmbusChannelOnGpadlTorndown(
 		}
 	}
 	spin_unlock_irqrestore(&gVmbusConnection.channelmsg_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -712,8 +679,6 @@ static void VmbusChannelOnVersionResponse(
 	struct vmbus_channel_version_response *versionResponse;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	versionResponse = (struct vmbus_channel_version_response *)hdr;
 	spin_lock_irqsave(&gVmbusConnection.channelmsg_lock, flags);
 
@@ -732,8 +697,6 @@ static void VmbusChannelOnVersionResponse(
 		}
 	}
 	spin_unlock_irqrestore(&gVmbusConnection.channelmsg_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /* Channel message dispatch table */
@@ -769,8 +732,6 @@ void VmbusOnChannelMessage(void *Context)
 	struct vmbus_channel_message_header *hdr;
 	int size;
 
-	DPRINT_ENTER(VMBUS);
-
 	hdr = (struct vmbus_channel_message_header *)msg->u.Payload;
 	size = msg->Header.PayloadSize;
 
@@ -794,7 +755,6 @@ void VmbusOnChannelMessage(void *Context)
 
 	/* Free the msg that was allocated in VmbusOnMsgDPC() */
 	kfree(msg);
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -806,8 +766,6 @@ int VmbusChannelRequestOffers(void)
 	struct vmbus_channel_msginfo *msgInfo;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
-
 	msgInfo = kmalloc(sizeof(*msgInfo) +
 			  sizeof(struct vmbus_channel_message_header),
 			  GFP_KERNEL);
@@ -853,7 +811,6 @@ Cleanup:
 		kfree(msgInfo);
 	}
 
-	DPRINT_EXIT(VMBUS);
 	return ret;
 }
 
diff --git a/drivers/staging/hv/channel_mgmt.h b/drivers/staging/hv/channel_mgmt.h
index 5908b81d3e9..f969267895b 100644
--- a/drivers/staging/hv/channel_mgmt.h
+++ b/drivers/staging/hv/channel_mgmt.h
@@ -247,8 +247,8 @@ struct vmbus_channel {
 	/* Allocated memory for ring buffer */
 	void *RingBufferPages;
 	u32 RingBufferPageCount;
-	RING_BUFFER_INFO Outbound;	/* send to parent */
-	RING_BUFFER_INFO Inbound;	/* receive from parent */
+	struct hv_ring_buffer_info Outbound;	/* send to parent */
+	struct hv_ring_buffer_info Inbound;	/* receive from parent */
 	spinlock_t inbound_lock;
 	struct workqueue_struct *ControlWQ;
 
@@ -272,8 +272,8 @@ struct vmbus_channel_debug_info {
 	u32 ClientMonitorLatency;
 	u32 ClientMonitorConnectionId;
 
-	RING_BUFFER_DEBUG_INFO Inbound;
-	RING_BUFFER_DEBUG_INFO Outbound;
+	struct hv_ring_buffer_debug_info Inbound;
+	struct hv_ring_buffer_debug_info Outbound;
 };
 
 /*
diff --git a/drivers/staging/hv/connection.c b/drivers/staging/hv/connection.c
index e8824dadffc..1f4d6683aaa 100644
--- a/drivers/staging/hv/connection.c
+++ b/drivers/staging/hv/connection.c
@@ -44,8 +44,6 @@ int VmbusConnect(void)
 	struct vmbus_channel_initiate_contact *msg;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Make sure we are not connecting or connected */
 	if (gVmbusConnection.ConnectState != Disconnected)
 		return -1;
@@ -155,8 +153,6 @@ int VmbusConnect(void)
 
 	kfree(msgInfo->WaitEvent);
 	kfree(msgInfo);
-	DPRINT_EXIT(VMBUS);
-
 	return 0;
 
 Cleanup:
@@ -180,8 +176,6 @@ Cleanup:
 		kfree(msgInfo);
 	}
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -193,8 +187,6 @@ int VmbusDisconnect(void)
 	int ret = 0;
 	struct vmbus_channel_message_header *msg;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Make sure we are connected */
 	if (gVmbusConnection.ConnectState != Connected)
 		return -1;
@@ -221,7 +213,6 @@ int VmbusDisconnect(void)
 
 Cleanup:
 	kfree(msg);
-	DPRINT_EXIT(VMBUS);
 	return ret;
 }
 
@@ -285,8 +276,6 @@ void VmbusOnEvents(void)
 	int relid;
 	u32 *recvInterruptPage = gVmbusConnection.RecvInterruptPage;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Check events */
 	if (recvInterruptPage) {
 		for (dword = 0; dword < maxdword; dword++) {
@@ -310,8 +299,6 @@ void VmbusOnEvents(void)
 			}
 		 }
 	}
-	DPRINT_EXIT(VMBUS);
-
 	return;
 }
 
@@ -332,18 +319,10 @@ int VmbusPostMessage(void *buffer, size_t bufferLen)
  */
 int VmbusSetEvent(u32 childRelId)
 {
-	int ret = 0;
-
-	DPRINT_ENTER(VMBUS);
-
 	/* Each u32 represents 32 channels */
 	set_bit(childRelId & 31,
 		(unsigned long *)gVmbusConnection.SendInterruptPage +
 		(childRelId >> 5));
 
-	ret = HvSignalEvent();
-
-	DPRINT_EXIT(VMBUS);
-
-	return ret;
+	return HvSignalEvent();
 }
diff --git a/drivers/staging/hv/hv.c b/drivers/staging/hv/hv.c
index 6c77e64027f..86b1ddd9040 100644
--- a/drivers/staging/hv/hv.c
+++ b/drivers/staging/hv/hv.c
@@ -192,8 +192,6 @@ int HvInit(void)
 	union hv_x64_msr_hypercall_contents hypercallMsr;
 	void *virtAddr = NULL;
 
-	DPRINT_ENTER(VMBUS);
-
 	memset(gHvContext.synICEventPage, 0, sizeof(void *) * MAX_NUM_CPUS);
 	memset(gHvContext.synICMessagePage, 0, sizeof(void *) * MAX_NUM_CPUS);
 
@@ -275,8 +273,6 @@ int HvInit(void)
 	gHvContext.SignalEventParam->FlagNumber = 0;
 	gHvContext.SignalEventParam->RsvdZ = 0;
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 
 Cleanup:
@@ -289,8 +285,6 @@ Cleanup:
 		vfree(virtAddr);
 	}
 	ret = -1;
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -303,8 +297,6 @@ void HvCleanup(void)
 {
 	union hv_x64_msr_hypercall_contents hypercallMsr;
 
-	DPRINT_ENTER(VMBUS);
-
 	kfree(gHvContext.SignalEventBuffer);
 	gHvContext.SignalEventBuffer = NULL;
 	gHvContext.SignalEventParam = NULL;
@@ -315,8 +307,6 @@ void HvCleanup(void)
 		vfree(gHvContext.HypercallPage);
 		gHvContext.HypercallPage = NULL;
 	}
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -392,12 +382,8 @@ void HvSynicInit(void *irqarg)
 	u32 irqVector = *((u32 *)(irqarg));
 	int cpu = smp_processor_id();
 
-	DPRINT_ENTER(VMBUS);
-
-	if (!gHvContext.HypercallPage) {
-		DPRINT_EXIT(VMBUS);
+	if (!gHvContext.HypercallPage)
 		return;
-	}
 
 	/* Check the version */
 	rdmsrl(HV_X64_MSR_SVERSION, version);
@@ -464,9 +450,6 @@ void HvSynicInit(void *irqarg)
 	wrmsrl(HV_X64_MSR_SCONTROL, sctrl.AsUINT64);
 
 	gHvContext.SynICInitialized = true;
-
-	DPRINT_EXIT(VMBUS);
-
 	return;
 
 Cleanup:
@@ -475,8 +458,6 @@ Cleanup:
 
 	if (gHvContext.synICMessagePage[cpu])
 		osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
-
-	DPRINT_EXIT(VMBUS);
 	return;
 }
 
@@ -490,12 +471,8 @@ void HvSynicCleanup(void *arg)
 	union hv_synic_siefp siefp;
 	int cpu = smp_processor_id();
 
-	DPRINT_ENTER(VMBUS);
-
-	if (!gHvContext.SynICInitialized) {
-		DPRINT_EXIT(VMBUS);
+	if (!gHvContext.SynICInitialized)
 		return;
-	}
 
 	rdmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, sharedSint.AsUINT64);
 
@@ -519,6 +496,4 @@ void HvSynicCleanup(void *arg)
 
 	osd_PageFree(gHvContext.synICMessagePage[cpu], 1);
 	osd_PageFree(gHvContext.synICEventPage[cpu], 1);
-
-	DPRINT_EXIT(VMBUS);
 }
diff --git a/drivers/staging/hv/hv_timesource.c b/drivers/staging/hv/hv_timesource.c
new file mode 100644
index 00000000000..a7ee533303b
--- /dev/null
+++ b/drivers/staging/hv/hv_timesource.c
@@ -0,0 +1,101 @@
+/*
+ * A clocksource for Linux running on HyperV.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
+#include <asm/hyperv.h>
+#include <asm/mshyperv.h>
+#include <asm/hypervisor.h>
+
+#define HV_CLOCK_SHIFT	22
+
+static cycle_t read_hv_clock(struct clocksource *arg)
+{
+	cycle_t current_tick;
+	/*
+	 * Read the partition counter to get the current tick count. This count
+	 * is set to 0 when the partition is created and is incremented in
+	 * 100 nanosecond units.
+	 */
+	rdmsrl(HV_X64_MSR_TIME_REF_COUNT, current_tick);
+	return current_tick;
+}
+
+static struct clocksource hyperv_cs = {
+	.name           = "hyperv_clocksource",
+	.rating         = 400, /* use this when running on Hyperv*/
+	.read           = read_hv_clock,
+	.mask           = CLOCKSOURCE_MASK(64),
+	/*
+	 * The time ref counter in HyperV is in 100ns units.
+	 * The definition of mult is:
+	 * mult/2^shift = ns/cyc = 100
+	 * mult = (100 << shift)
+	 */
+	.mult           = (100 << HV_CLOCK_SHIFT),
+	.shift          = HV_CLOCK_SHIFT,
+};
+
+static const struct dmi_system_id __initconst
+hv_timesource_dmi_table[] __maybe_unused  = {
+	{
+		.ident = "Hyper-V",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
+			DMI_MATCH(DMI_BOARD_NAME, "Virtual Machine"),
+		},
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(dmi, hv_timesource_dmi_table);
+
+static const struct pci_device_id __initconst
+hv_timesource_pci_table[] __maybe_unused = {
+	{ PCI_DEVICE(0x1414, 0x5353) }, /* VGA compatible controller */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, hv_timesource_pci_table);
+
+
+static int __init init_hv_clocksource(void)
+{
+	if ((x86_hyper != &x86_hyper_ms_hyperv) ||
+		!(ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE))
+		return -ENODEV;
+
+	if (!dmi_check_system(hv_timesource_dmi_table))
+		return -ENODEV;
+
+	printk(KERN_INFO "Registering HyperV clock source\n");
+	return clocksource_register(&hyperv_cs);
+}
+
+module_init(init_hv_clocksource);
+MODULE_DESCRIPTION("HyperV based clocksource");
+MODULE_AUTHOR("K. Y. Srinivasan <ksrinivasan@novell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 2adc9b48ca9..6eb79febef9 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -52,8 +52,6 @@ static void shutdown_onchannelcallback(void *context)
 	struct icmsg_hdr *icmsghdrp;
 	struct icmsg_negotiate *negop = NULL;
 
-	DPRINT_ENTER(VMBUS);
-
 	buflen = PAGE_SIZE;
 	buf = kmalloc(buflen, GFP_ATOMIC);
 
@@ -102,8 +100,6 @@ static void shutdown_onchannelcallback(void *context)
 
 	kfree(buf);
 
-	DPRINT_EXIT(VMBUS);
-
 	if (execute_shutdown == true)
 		orderly_poweroff(false);
 }
@@ -160,8 +156,6 @@ static void timesync_onchannelcallback(void *context)
 	struct icmsg_hdr *icmsghdrp;
 	struct ictimesync_data *timedatap;
 
-	DPRINT_ENTER(VMBUS);
-
 	buflen = PAGE_SIZE;
 	buf = kmalloc(buflen, GFP_ATOMIC);
 
@@ -192,8 +186,6 @@ static void timesync_onchannelcallback(void *context)
 	}
 
 	kfree(buf);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -210,8 +202,6 @@ static void heartbeat_onchannelcallback(void *context)
 	struct icmsg_hdr *icmsghdrp;
 	struct heartbeat_msg_data *heartbeat_msg;
 
-	DPRINT_ENTER(VMBUS);
-
 	buflen = PAGE_SIZE;
 	buf = kmalloc(buflen, GFP_ATOMIC);
 
@@ -249,8 +239,6 @@ static void heartbeat_onchannelcallback(void *context)
 	}
 
 	kfree(buf);
-
-	DPRINT_EXIT(VMBUS);
 }
 
 static const struct pci_device_id __initconst
diff --git a/drivers/staging/hv/logging.h b/drivers/staging/hv/logging.h
index ad4cfcfb7b1..20d4d12023d 100644
--- a/drivers/staging/hv/logging.h
+++ b/drivers/staging/hv/logging.h
@@ -92,21 +92,4 @@ extern unsigned int vmbus_loglevel;
 		       __func__, ## args);\
 	} while (0)
 
-#ifdef DEBUG
-#define DPRINT_ENTER(mod) do {\
-	if ((mod & (HIWORD(vmbus_loglevel))) && \
-	    (DEBUG_LVL_ENTEREXIT <= LOWORD(vmbus_loglevel)))	\
-		printk(KERN_DEBUG "["#mod"]: %s() enter\n", __func__);\
-	} while (0)
-
-#define DPRINT_EXIT(mod) do {\
-	if ((mod & (HIWORD(vmbus_loglevel))) && \
-	    (DEBUG_LVL_ENTEREXIT <= LOWORD(vmbus_loglevel)))	\
-		printk(KERN_DEBUG "["#mod"]: %s() exit\n", __func__);\
-	} while (0)
-#else
-#define DPRINT_ENTER(mod)
-#define DPRINT_EXIT(mod)
-#endif
-
 #endif /* _LOGGING_H_ */
diff --git a/drivers/staging/hv/netvsc.c b/drivers/staging/hv/netvsc.c
index ba15059c45b..1d2ebbe17e2 100644
--- a/drivers/staging/hv/netvsc.c
+++ b/drivers/staging/hv/netvsc.c
@@ -174,8 +174,6 @@ int NetVscInitialize(struct hv_driver *drv)
 {
 	struct netvsc_driver *driver = (struct netvsc_driver *)drv;
 
-	DPRINT_ENTER(NETVSC);
-
 	DPRINT_DBG(NETVSC, "sizeof(struct hv_netvsc_packet)=%zd, "
 		   "sizeof(struct nvsp_message)=%zd, "
 		   "sizeof(struct vmtransfer_page_packet_header)=%zd",
@@ -202,9 +200,6 @@ int NetVscInitialize(struct hv_driver *drv)
 	driver->OnSend			= NetVscOnSend;
 
 	RndisFilterInit(driver);
-
-	DPRINT_EXIT(NETVSC);
-
 	return 0;
 }
 
@@ -214,13 +209,10 @@ static int NetVscInitializeReceiveBufferWithNetVsp(struct hv_device *Device)
 	struct netvsc_device *netDevice;
 	struct nvsp_message *initPacket;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetOutboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 	/* ASSERT(netDevice->ReceiveBufferSize > 0); */
@@ -335,7 +327,6 @@ Cleanup:
 
 Exit:
 	PutNetDevice(Device);
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -345,13 +336,10 @@ static int NetVscInitializeSendBufferWithNetVsp(struct hv_device *Device)
 	struct netvsc_device *netDevice;
 	struct nvsp_message *initPacket;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetOutboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 	if (netDevice->SendBufferSize <= 0) {
@@ -434,7 +422,6 @@ Cleanup:
 
 Exit:
 	PutNetDevice(Device);
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -443,8 +430,6 @@ static int NetVscDestroyReceiveBuffer(struct netvsc_device *NetDevice)
 	struct nvsp_message *revokePacket;
 	int ret = 0;
 
-	DPRINT_ENTER(NETVSC);
-
 	/*
 	 * If we got a section count, it means we received a
 	 * SendReceiveBufferComplete msg (ie sent
@@ -475,7 +460,6 @@ static int NetVscDestroyReceiveBuffer(struct netvsc_device *NetDevice)
 		if (ret != 0) {
 			DPRINT_ERR(NETVSC, "unable to send revoke receive "
 				   "buffer to netvsp");
-			DPRINT_EXIT(NETVSC);
 			return -1;
 		}
 	}
@@ -492,7 +476,6 @@ static int NetVscDestroyReceiveBuffer(struct netvsc_device *NetDevice)
 		if (ret != 0) {
 			DPRINT_ERR(NETVSC,
 				   "unable to teardown receive buffer's gpadl");
-			DPRINT_EXIT(NETVSC);
 			return -1;
 		}
 		NetDevice->ReceiveBufferGpadlHandle = 0;
@@ -513,8 +496,6 @@ static int NetVscDestroyReceiveBuffer(struct netvsc_device *NetDevice)
 		NetDevice->ReceiveSections = NULL;
 	}
 
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
@@ -523,8 +504,6 @@ static int NetVscDestroySendBuffer(struct netvsc_device *NetDevice)
 	struct nvsp_message *revokePacket;
 	int ret = 0;
 
-	DPRINT_ENTER(NETVSC);
-
 	/*
 	 * If we got a section count, it means we received a
 	 *  SendReceiveBufferComplete msg (ie sent
@@ -554,7 +533,6 @@ static int NetVscDestroySendBuffer(struct netvsc_device *NetDevice)
 		if (ret != 0) {
 			DPRINT_ERR(NETVSC, "unable to send revoke send buffer "
 				   "to netvsp");
-			DPRINT_EXIT(NETVSC);
 			return -1;
 		}
 	}
@@ -572,7 +550,6 @@ static int NetVscDestroySendBuffer(struct netvsc_device *NetDevice)
 		if (ret != 0) {
 			DPRINT_ERR(NETVSC, "unable to teardown send buffer's "
 				   "gpadl");
-			DPRINT_EXIT(NETVSC);
 			return -1;
 		}
 		NetDevice->SendBufferGpadlHandle = 0;
@@ -587,8 +564,6 @@ static int NetVscDestroySendBuffer(struct netvsc_device *NetDevice)
 		NetDevice->SendBuffer = NULL;
 	}
 
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
@@ -600,13 +575,10 @@ static int NetVscConnectToVsp(struct hv_device *Device)
 	struct nvsp_message *initPacket;
 	int ndisVersion;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetOutboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 
@@ -696,18 +668,13 @@ static int NetVscConnectToVsp(struct hv_device *Device)
 
 Cleanup:
 	PutNetDevice(Device);
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
 static void NetVscDisconnectFromVsp(struct netvsc_device *NetDevice)
 {
-	DPRINT_ENTER(NETVSC);
-
 	NetVscDestroyReceiveBuffer(NetDevice);
 	NetVscDestroySendBuffer(NetDevice);
-
-	DPRINT_EXIT(NETVSC);
 }
 
 /*
@@ -722,8 +689,6 @@ static int NetVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 	struct netvsc_driver *netDriver =
 				(struct netvsc_driver *)Device->Driver;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = AllocNetDevice(Device);
 	if (!netDevice) {
 		ret = -1;
@@ -787,7 +752,6 @@ static int NetVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 	DPRINT_INFO(NETVSC, "*** NetVSC channel handshake result - %d ***",
 		    ret);
 
-	DPRINT_EXIT(NETVSC);
 	return ret;
 
 Close:
@@ -812,7 +776,6 @@ Cleanup:
 		FreeNetDevice(netDevice);
 	}
 
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -824,8 +787,6 @@ static int NetVscOnDeviceRemove(struct hv_device *Device)
 	struct netvsc_device *netDevice;
 	struct hv_netvsc_packet *netvscPacket, *pos;
 
-	DPRINT_ENTER(NETVSC);
-
 	DPRINT_INFO(NETVSC, "Disabling outbound traffic on net device (%p)...",
 		    Device->Extension);
 
@@ -868,8 +829,6 @@ static int NetVscOnDeviceRemove(struct hv_device *Device)
 
 	kfree(netDevice->ChannelInitEvent);
 	FreeNetDevice(netDevice);
-
-	DPRINT_EXIT(NETVSC);
 	return 0;
 }
 
@@ -878,8 +837,6 @@ static int NetVscOnDeviceRemove(struct hv_device *Device)
  */
 static void NetVscOnCleanup(struct hv_driver *drv)
 {
-	DPRINT_ENTER(NETVSC);
-	DPRINT_EXIT(NETVSC);
 }
 
 static void NetVscOnSendCompletion(struct hv_device *Device,
@@ -889,13 +846,10 @@ static void NetVscOnSendCompletion(struct hv_device *Device,
 	struct nvsp_message *nvspPacket;
 	struct hv_netvsc_packet *nvscPacket;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetInboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return;
 	}
 
@@ -929,7 +883,6 @@ static void NetVscOnSendCompletion(struct hv_device *Device,
 	}
 
 	PutNetDevice(Device);
-	DPRINT_EXIT(NETVSC);
 }
 
 static int NetVscOnSend(struct hv_device *Device,
@@ -940,13 +893,10 @@ static int NetVscOnSend(struct hv_device *Device,
 
 	struct nvsp_message sendMessage;
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetOutboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "net device (%p) shutting down..."
 			   "ignoring outbound packets", netDevice);
-		DPRINT_EXIT(NETVSC);
 		return -2;
 	}
 
@@ -986,8 +936,6 @@ static int NetVscOnSend(struct hv_device *Device,
 
 	atomic_inc(&netDevice->NumOutstandingSends);
 	PutNetDevice(Device);
-
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -1007,13 +955,10 @@ static void NetVscOnReceive(struct hv_device *Device,
 	unsigned long flags;
 	LIST_HEAD(listHead);
 
-	DPRINT_ENTER(NETVSC);
-
 	netDevice = GetInboundNetDevice(Device);
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return;
 	}
 
@@ -1189,7 +1134,6 @@ static void NetVscOnReceive(struct hv_device *Device,
 	/* ASSERT(list_empty(&listHead)); */
 
 	PutNetDevice(Device);
-	DPRINT_EXIT(NETVSC);
 }
 
 static void NetVscSendReceiveCompletion(struct hv_device *Device,
@@ -1248,8 +1192,6 @@ static void NetVscOnReceiveCompletion(void *Context)
 	bool fSendReceiveComp = false;
 	unsigned long flags;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* ASSERT(packet->XferPagePacket); */
 
 	/*
@@ -1261,7 +1203,6 @@ static void NetVscOnReceiveCompletion(void *Context)
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "unable to get net device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(NETVSC);
 		return;
 	}
 
@@ -1292,7 +1233,6 @@ static void NetVscOnReceiveCompletion(void *Context)
 		NetVscSendReceiveCompletion(device, transactionId);
 
 	PutNetDevice(device);
-	DPRINT_EXIT(NETVSC);
 }
 
 static void NetVscOnChannelCallback(void *Context)
@@ -1307,9 +1247,6 @@ static void NetVscOnChannelCallback(void *Context)
 	unsigned char *buffer;
 	int bufferlen = NETVSC_PACKET_SIZE;
 
-
-	DPRINT_ENTER(NETVSC);
-
 	/* ASSERT(device); */
 
 	packet = kzalloc(NETVSC_PACKET_SIZE * sizeof(unsigned char),
@@ -1322,7 +1259,6 @@ static void NetVscOnChannelCallback(void *Context)
 	if (!netDevice) {
 		DPRINT_ERR(NETVSC, "net device (%p) shutting down..."
 			   "ignoring inbound packets", netDevice);
-		DPRINT_EXIT(NETVSC);
 		goto out;
 	}
 
@@ -1386,7 +1322,6 @@ static void NetVscOnChannelCallback(void *Context)
 	} while (1);
 
 	PutNetDevice(device);
-	DPRINT_EXIT(NETVSC);
 out:
 	kfree(buffer);
 	return;
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 55b993298ff..56e11575c97 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -76,8 +76,6 @@ static int netvsc_open(struct net_device *net)
 	struct hv_device *device_obj = &net_device_ctx->device_ctx->device_obj;
 	int ret = 0;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	if (netif_carrier_ok(net)) {
 		/* Open up the device */
 		ret = RndisFilterOnOpen(device_obj);
@@ -92,7 +90,6 @@ static int netvsc_open(struct net_device *net)
 		DPRINT_ERR(NETVSC_DRV, "unable to open device...link is down.");
 	}
 
-	DPRINT_EXIT(NETVSC_DRV);
 	return ret;
 }
 
@@ -102,16 +99,12 @@ static int netvsc_close(struct net_device *net)
 	struct hv_device *device_obj = &net_device_ctx->device_ctx->device_obj;
 	int ret;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	netif_stop_queue(net);
 
 	ret = RndisFilterOnClose(device_obj);
 	if (ret != 0)
 		DPRINT_ERR(NETVSC_DRV, "unable to close device (ret %d).", ret);
 
-	DPRINT_EXIT(NETVSC_DRV);
-
 	return ret;
 }
 
@@ -121,8 +114,6 @@ static void netvsc_xmit_completion(void *context)
 	struct sk_buff *skb = (struct sk_buff *)
 		(unsigned long)packet->Completion.Send.SendCompletionTid;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	kfree(packet);
 
 	if (skb) {
@@ -135,8 +126,6 @@ static void netvsc_xmit_completion(void *context)
 		if ((net_device_ctx->avail += num_pages) >= PACKET_PAGES_HIWATER)
  			netif_wake_queue(net);
 	}
-
-	DPRINT_EXIT(NETVSC_DRV);
 }
 
 static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
@@ -151,8 +140,6 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 	int ret;
 	unsigned int i, num_pages;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	DPRINT_DBG(NETVSC_DRV, "xmit packet - len %d data_len %d",
 		   skb->len, skb->data_len);
 
@@ -225,7 +212,6 @@ static int netvsc_start_xmit(struct sk_buff *skb, struct net_device *net)
 		netvsc_xmit_completion(packet);
 	}
 
-	DPRINT_EXIT(NETVSC_DRV);
 	return NETDEV_TX_OK;
 }
 
@@ -238,8 +224,6 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj,
 	struct vm_device *device_ctx = to_vm_device(device_obj);
 	struct net_device *net = dev_get_drvdata(&device_ctx->device);
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	if (!net) {
 		DPRINT_ERR(NETVSC_DRV, "got link status but net device "
 				"not initialized yet");
@@ -253,7 +237,6 @@ static void netvsc_linkstatus_callback(struct hv_device *device_obj,
 		netif_carrier_off(net);
 		netif_stop_queue(net);
 	}
-	DPRINT_EXIT(NETVSC_DRV);
 }
 
 /*
@@ -270,8 +253,6 @@ static int netvsc_recv_callback(struct hv_device *device_obj,
 	int i;
 	unsigned long flags;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	if (!net) {
 		DPRINT_ERR(NETVSC_DRV, "got receive callback but net device "
 				"not initialized yet");
@@ -323,8 +304,6 @@ static int netvsc_recv_callback(struct hv_device *device_obj,
 	DPRINT_DBG(NETVSC_DRV, "# of recvs %lu total size %lu",
 		   net->stats.rx_packets, net->stats.rx_bytes);
 
-	DPRINT_EXIT(NETVSC_DRV);
-
 	return 0;
 }
 
@@ -364,8 +343,6 @@ static int netvsc_probe(struct device *device)
 	struct netvsc_device_info device_info;
 	int ret;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	if (!net_drv_obj->Base.OnDeviceAdd)
 		return -1;
 
@@ -422,7 +399,6 @@ static int netvsc_probe(struct device *device)
 		free_netdev(net);
 	}
 
-	DPRINT_EXIT(NETVSC_DRV);
 	return ret;
 }
 
@@ -438,18 +414,13 @@ static int netvsc_remove(struct device *device)
 	struct hv_device *device_obj = &device_ctx->device_obj;
 	int ret;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	if (net == NULL) {
 		DPRINT_INFO(NETVSC, "no net device to remove");
-		DPRINT_EXIT(NETVSC_DRV);
 		return 0;
 	}
 
-	if (!net_drv_obj->Base.OnDeviceRemove) {
-		DPRINT_EXIT(NETVSC_DRV);
+	if (!net_drv_obj->Base.OnDeviceRemove)
 		return -1;
-	}
 
 	/* Stop outbound asap */
 	netif_stop_queue(net);
@@ -468,7 +439,6 @@ static int netvsc_remove(struct device *device)
 	}
 
 	free_netdev(net);
-	DPRINT_EXIT(NETVSC_DRV);
 	return ret;
 }
 
@@ -488,8 +458,6 @@ static void netvsc_drv_exit(void)
 	struct device *current_dev;
 	int ret;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	while (1) {
 		current_dev = NULL;
 
@@ -515,8 +483,6 @@ static void netvsc_drv_exit(void)
 
 	vmbus_child_driver_unregister(drv_ctx);
 
-	DPRINT_EXIT(NETVSC_DRV);
-
 	return;
 }
 
@@ -526,8 +492,6 @@ static int netvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	struct driver_context *drv_ctx = &g_netvsc_drv.drv_ctx;
 	int ret;
 
-	DPRINT_ENTER(NETVSC_DRV);
-
 	vmbus_get_interface(&net_drv_obj->Base.VmbusChannelInterface);
 
 	net_drv_obj->RingBufferSize = ring_size * PAGE_SIZE;
@@ -547,8 +511,6 @@ static int netvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	/* The driver belongs to vmbus */
 	ret = vmbus_child_driver_register(drv_ctx);
 
-	DPRINT_EXIT(NETVSC_DRV);
-
 	return ret;
 }
 
@@ -568,26 +530,17 @@ MODULE_DEVICE_TABLE(dmi, hv_netvsc_dmi_table);
 
 static int __init netvsc_init(void)
 {
-	int ret;
-
-	DPRINT_ENTER(NETVSC_DRV);
 	DPRINT_INFO(NETVSC_DRV, "Netvsc initializing....");
 
 	if (!dmi_check_system(hv_netvsc_dmi_table))
 		return -ENODEV;
 
-	ret = netvsc_drv_init(NetVscInitialize);
-
-	DPRINT_EXIT(NETVSC_DRV);
-
-	return ret;
+	return netvsc_drv_init(NetVscInitialize);
 }
 
 static void __exit netvsc_exit(void)
 {
-	DPRINT_ENTER(NETVSC_DRV);
 	netvsc_drv_exit();
-	DPRINT_EXIT(NETVSC_DRV);
 }
 
 static const struct pci_device_id __initconst
diff --git a/drivers/staging/hv/ring_buffer.c b/drivers/staging/hv/ring_buffer.c
index ae2a10e24d9..17bc7626f70 100644
--- a/drivers/staging/hv/ring_buffer.c
+++ b/drivers/staging/hv/ring_buffer.c
@@ -46,7 +46,7 @@ Description:
 
 --*/
 static inline void
-GetRingBufferAvailBytes(RING_BUFFER_INFO *rbi, u32 *read, u32 *write)
+GetRingBufferAvailBytes(struct hv_ring_buffer_info *rbi, u32 *read, u32 *write)
 {
 	u32 read_loc, write_loc;
 
@@ -68,7 +68,7 @@ Description:
 
 --*/
 static inline u32
-GetNextWriteLocation(RING_BUFFER_INFO *RingInfo)
+GetNextWriteLocation(struct hv_ring_buffer_info *RingInfo)
 {
 	u32 next = RingInfo->RingBuffer->WriteIndex;
 
@@ -87,7 +87,8 @@ Description:
 
 --*/
 static inline void
-SetNextWriteLocation(RING_BUFFER_INFO *RingInfo, u32 NextWriteLocation)
+SetNextWriteLocation(struct hv_ring_buffer_info *RingInfo,
+		     u32 NextWriteLocation)
 {
 	RingInfo->RingBuffer->WriteIndex = NextWriteLocation;
 }
@@ -102,7 +103,7 @@ Description:
 
 --*/
 static inline u32
-GetNextReadLocation(RING_BUFFER_INFO *RingInfo)
+GetNextReadLocation(struct hv_ring_buffer_info *RingInfo)
 {
 	u32 next = RingInfo->RingBuffer->ReadIndex;
 
@@ -122,7 +123,7 @@ Description:
 
 --*/
 static inline u32
-GetNextReadLocationWithOffset(RING_BUFFER_INFO *RingInfo, u32 Offset)
+GetNextReadLocationWithOffset(struct hv_ring_buffer_info *RingInfo, u32 Offset)
 {
 	u32 next = RingInfo->RingBuffer->ReadIndex;
 
@@ -143,7 +144,7 @@ Description:
 
 --*/
 static inline void
-SetNextReadLocation(RING_BUFFER_INFO *RingInfo, u32 NextReadLocation)
+SetNextReadLocation(struct hv_ring_buffer_info *RingInfo, u32 NextReadLocation)
 {
 	RingInfo->RingBuffer->ReadIndex = NextReadLocation;
 }
@@ -159,7 +160,7 @@ Description:
 
 --*/
 static inline void *
-GetRingBuffer(RING_BUFFER_INFO *RingInfo)
+GetRingBuffer(struct hv_ring_buffer_info *RingInfo)
 {
 	return (void *)RingInfo->RingBuffer->Buffer;
 }
@@ -175,7 +176,7 @@ Description:
 
 --*/
 static inline u32
-GetRingBufferSize(RING_BUFFER_INFO *RingInfo)
+GetRingBufferSize(struct hv_ring_buffer_info *RingInfo)
 {
 	return RingInfo->RingDataSize;
 }
@@ -190,7 +191,7 @@ Description:
 
 --*/
 static inline u64
-GetRingBufferIndices(RING_BUFFER_INFO *RingInfo)
+GetRingBufferIndices(struct hv_ring_buffer_info *RingInfo)
 {
 	return ((u64)RingInfo->RingBuffer->WriteIndex << 32)
 	|| RingInfo->RingBuffer->ReadIndex;
@@ -206,7 +207,7 @@ Description:
 	Dump out to console the ring buffer info
 
 --*/
-void DumpRingInfo(RING_BUFFER_INFO *RingInfo, char *Prefix)
+void DumpRingInfo(struct hv_ring_buffer_info *RingInfo, char *Prefix)
 {
 	u32 bytesAvailToWrite;
 	u32 bytesAvailToRead;
@@ -233,14 +234,14 @@ void DumpRingInfo(RING_BUFFER_INFO *RingInfo, char *Prefix)
 
 static u32
 CopyToRingBuffer(
-	RING_BUFFER_INFO	*RingInfo,
+	struct hv_ring_buffer_info	*RingInfo,
 	u32				StartWriteOffset,
 	void				*Src,
 	u32				SrcLen);
 
 static u32
 CopyFromRingBuffer(
-	RING_BUFFER_INFO	*RingInfo,
+	struct hv_ring_buffer_info	*RingInfo,
 	void				*Dest,
 	u32				DestLen,
 	u32				StartReadOffset);
@@ -256,8 +257,8 @@ Description:
 	Get various debug metrics for the specified ring buffer
 
 --*/
-void RingBufferGetDebugInfo(RING_BUFFER_INFO *RingInfo,
-			    RING_BUFFER_DEBUG_INFO *DebugInfo)
+void RingBufferGetDebugInfo(struct hv_ring_buffer_info *RingInfo,
+			    struct hv_ring_buffer_debug_info *debug_info)
 {
 	u32 bytesAvailToWrite;
 	u32 bytesAvailToRead;
@@ -267,11 +268,11 @@ void RingBufferGetDebugInfo(RING_BUFFER_INFO *RingInfo,
 					&bytesAvailToRead,
 					&bytesAvailToWrite);
 
-		DebugInfo->BytesAvailToRead = bytesAvailToRead;
-		DebugInfo->BytesAvailToWrite = bytesAvailToWrite;
-		DebugInfo->CurrentReadIndex = RingInfo->RingBuffer->ReadIndex;
-		DebugInfo->CurrentWriteIndex = RingInfo->RingBuffer->WriteIndex;
-		DebugInfo->CurrentInterruptMask = RingInfo->RingBuffer->InterruptMask;
+		debug_info->BytesAvailToRead = bytesAvailToRead;
+		debug_info->BytesAvailToWrite = bytesAvailToWrite;
+		debug_info->CurrentReadIndex = RingInfo->RingBuffer->ReadIndex;
+		debug_info->CurrentWriteIndex = RingInfo->RingBuffer->WriteIndex;
+		debug_info->CurrentInterruptMask = RingInfo->RingBuffer->InterruptMask;
 	}
 }
 
@@ -285,7 +286,7 @@ Description:
 	Get the interrupt mask for the specified ring buffer
 
 --*/
-u32 GetRingBufferInterruptMask(RING_BUFFER_INFO *rbi)
+u32 GetRingBufferInterruptMask(struct hv_ring_buffer_info *rbi)
 {
 	return rbi->RingBuffer->InterruptMask;
 }
@@ -299,18 +300,18 @@ Description:
 	Initialize the ring buffer
 
 --*/
-int RingBufferInit(RING_BUFFER_INFO *RingInfo, void *Buffer, u32 BufferLen)
+int RingBufferInit(struct hv_ring_buffer_info *RingInfo, void *Buffer, u32 BufferLen)
 {
-	if (sizeof(RING_BUFFER) != PAGE_SIZE)
+	if (sizeof(struct hv_ring_buffer) != PAGE_SIZE)
 		return -EINVAL;
 
-	memset(RingInfo, 0, sizeof(RING_BUFFER_INFO));
+	memset(RingInfo, 0, sizeof(struct hv_ring_buffer_info));
 
-	RingInfo->RingBuffer = (RING_BUFFER *)Buffer;
+	RingInfo->RingBuffer = (struct hv_ring_buffer *)Buffer;
 	RingInfo->RingBuffer->ReadIndex = RingInfo->RingBuffer->WriteIndex = 0;
 
 	RingInfo->RingSize = BufferLen;
-	RingInfo->RingDataSize = BufferLen - sizeof(RING_BUFFER);
+	RingInfo->RingDataSize = BufferLen - sizeof(struct hv_ring_buffer);
 
 	spin_lock_init(&RingInfo->ring_lock);
 
@@ -326,7 +327,7 @@ Description:
 	Cleanup the ring buffer
 
 --*/
-void RingBufferCleanup(RING_BUFFER_INFO *RingInfo)
+void RingBufferCleanup(struct hv_ring_buffer_info *RingInfo)
 {
 }
 
@@ -339,7 +340,7 @@ Description:
 	Write to the ring buffer
 
 --*/
-int RingBufferWrite(RING_BUFFER_INFO *OutRingInfo,
+int RingBufferWrite(struct hv_ring_buffer_info *OutRingInfo,
 		    struct scatterlist *sglist, u32 sgcount)
 {
 	int i = 0;
@@ -352,8 +353,6 @@ int RingBufferWrite(RING_BUFFER_INFO *OutRingInfo,
 	u64 prevIndices = 0;
 	unsigned long flags;
 
-	DPRINT_ENTER(VMBUS);
-
 	for_each_sg(sglist, sg, sgcount, i)
 	{
 		totalBytesToWrite += sg->length;
@@ -382,9 +381,6 @@ int RingBufferWrite(RING_BUFFER_INFO *OutRingInfo,
 			byteAvailToWrite);
 
 		spin_unlock_irqrestore(&OutRingInfo->ring_lock, flags);
-
-		DPRINT_EXIT(VMBUS);
-
 		return -1;
 	}
 
@@ -416,9 +412,6 @@ int RingBufferWrite(RING_BUFFER_INFO *OutRingInfo,
 	/* DumpRingInfo(OutRingInfo, "AFTER "); */
 
 	spin_unlock_irqrestore(&OutRingInfo->ring_lock, flags);
-
-	DPRINT_EXIT(VMBUS);
-
 	return 0;
 }
 
@@ -432,7 +425,7 @@ Description:
 	Read without advancing the read index
 
 --*/
-int RingBufferPeek(RING_BUFFER_INFO *InRingInfo, void *Buffer, u32 BufferLen)
+int RingBufferPeek(struct hv_ring_buffer_info *InRingInfo, void *Buffer, u32 BufferLen)
 {
 	u32 bytesAvailToWrite;
 	u32 bytesAvailToRead;
@@ -481,7 +474,7 @@ Description:
 	Read and advance the read index
 
 --*/
-int RingBufferRead(RING_BUFFER_INFO *InRingInfo, void *Buffer,
+int RingBufferRead(struct hv_ring_buffer_info *InRingInfo, void *Buffer,
 		   u32 BufferLen, u32 Offset)
 {
 	u32 bytesAvailToWrite;
@@ -556,7 +549,7 @@ Description:
 --*/
 static u32
 CopyToRingBuffer(
-	RING_BUFFER_INFO	*RingInfo,
+	struct hv_ring_buffer_info	*RingInfo,
 	u32				StartWriteOffset,
 	void				*Src,
 	u32				SrcLen)
@@ -594,7 +587,7 @@ Description:
 --*/
 static u32
 CopyFromRingBuffer(
-	RING_BUFFER_INFO	*RingInfo,
+	struct hv_ring_buffer_info	*RingInfo,
 	void				*Dest,
 	u32				DestLen,
 	u32				StartReadOffset)
diff --git a/drivers/staging/hv/ring_buffer.h b/drivers/staging/hv/ring_buffer.h
index 6202157e145..a7f1717c6a5 100644
--- a/drivers/staging/hv/ring_buffer.h
+++ b/drivers/staging/hv/ring_buffer.h
@@ -27,7 +27,7 @@
 
 #include <linux/scatterlist.h>
 
-typedef struct _RING_BUFFER {
+struct hv_ring_buffer {
 	/* Offset in bytes from the start of ring data below */
 	volatile u32 WriteIndex;
 
@@ -51,51 +51,52 @@ typedef struct _RING_BUFFER {
 	 * !!! DO NOT place any fields below this !!!
 	 */
 	u8 Buffer[0];
-} __attribute__((packed)) RING_BUFFER;
+} __attribute__((packed));
 
-typedef struct _RING_BUFFER_INFO {
-	RING_BUFFER *RingBuffer;
+struct hv_ring_buffer_info {
+	struct hv_ring_buffer *RingBuffer;
 	u32 RingSize;			/* Include the shared header */
 	spinlock_t ring_lock;
 
 	u32 RingDataSize;		/* < ringSize */
 	u32 RingDataStartOffset;
+};
 
-} RING_BUFFER_INFO;
-
-typedef struct _RING_BUFFER_DEBUG_INFO {
+struct hv_ring_buffer_debug_info {
 	u32 CurrentInterruptMask;
 	u32 CurrentReadIndex;
 	u32 CurrentWriteIndex;
 	u32 BytesAvailToRead;
 	u32 BytesAvailToWrite;
-} RING_BUFFER_DEBUG_INFO;
+};
 
 
 
 /* Interface */
 
 
-int RingBufferInit(RING_BUFFER_INFO *RingInfo, void *Buffer, u32 BufferLen);
+int RingBufferInit(struct hv_ring_buffer_info *RingInfo, void *Buffer,
+		   u32 BufferLen);
 
-void RingBufferCleanup(RING_BUFFER_INFO *RingInfo);
+void RingBufferCleanup(struct hv_ring_buffer_info *RingInfo);
 
-int RingBufferWrite(RING_BUFFER_INFO *RingInfo,
+int RingBufferWrite(struct hv_ring_buffer_info *RingInfo,
 		    struct scatterlist *sglist,
 		    u32 sgcount);
 
-int RingBufferPeek(RING_BUFFER_INFO *RingInfo, void *Buffer, u32 BufferLen);
+int RingBufferPeek(struct hv_ring_buffer_info *RingInfo, void *Buffer,
+		   u32 BufferLen);
 
-int RingBufferRead(RING_BUFFER_INFO *RingInfo,
+int RingBufferRead(struct hv_ring_buffer_info *RingInfo,
 		   void *Buffer,
 		   u32 BufferLen,
 		   u32 Offset);
 
-u32 GetRingBufferInterruptMask(RING_BUFFER_INFO *RingInfo);
+u32 GetRingBufferInterruptMask(struct hv_ring_buffer_info *RingInfo);
 
-void DumpRingInfo(RING_BUFFER_INFO *RingInfo, char *Prefix);
+void DumpRingInfo(struct hv_ring_buffer_info *RingInfo, char *Prefix);
 
-void RingBufferGetDebugInfo(RING_BUFFER_INFO *RingInfo,
-			    RING_BUFFER_DEBUG_INFO *DebugInfo);
+void RingBufferGetDebugInfo(struct hv_ring_buffer_info *RingInfo,
+			    struct hv_ring_buffer_debug_info *debug_info);
 
 #endif /* _RING_BUFFER_H_ */
diff --git a/drivers/staging/hv/rndis_filter.c b/drivers/staging/hv/rndis_filter.c
index 5edf0853c6a..fa2141f454f 100644
--- a/drivers/staging/hv/rndis_filter.c
+++ b/drivers/staging/hv/rndis_filter.c
@@ -244,8 +244,6 @@ static int RndisFilterSendRequest(struct rndis_device *Device,
 	int ret;
 	struct hv_netvsc_packet *packet;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* Setup the packet to send it */
 	packet = &Request->Packet;
 
@@ -265,7 +263,6 @@ static int RndisFilterSendRequest(struct rndis_device *Device,
 	packet->Completion.Send.SendCompletionTid = (unsigned long)Device;
 
 	ret = gRndisFilter.InnerDriver.OnSend(Device->NetDevice->Device, packet);
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -276,8 +273,6 @@ static void RndisFilterReceiveResponse(struct rndis_device *Device,
 	bool found = false;
 	unsigned long flags;
 
-	DPRINT_ENTER(NETVSC);
-
 	spin_lock_irqsave(&Device->request_lock, flags);
 	list_for_each_entry(request, &Device->RequestList, ListEntry) {
 		/*
@@ -325,8 +320,6 @@ static void RndisFilterReceiveResponse(struct rndis_device *Device,
 			   Response->Message.InitializeComplete.RequestId,
 			   Response->NdisMessageType);
 	}
-
-	DPRINT_EXIT(NETVSC);
 }
 
 static void RndisFilterReceiveIndicateStatus(struct rndis_device *Device,
@@ -353,8 +346,6 @@ static void RndisFilterReceiveData(struct rndis_device *Device,
 	struct rndis_packet *rndisPacket;
 	u32 dataOffset;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* empty ethernet frame ?? */
 	/* ASSERT(Packet->PageBuffers[0].Length > */
 	/* 	RNDIS_MESSAGE_SIZE(struct rndis_packet)); */
@@ -377,8 +368,6 @@ static void RndisFilterReceiveData(struct rndis_device *Device,
 
 	gRndisFilter.InnerDriver.OnReceiveCallback(Device->NetDevice->Device,
 						   Packet);
-
-	DPRINT_EXIT(NETVSC);
 }
 
 static int RndisFilterOnReceive(struct hv_device *Device,
@@ -389,8 +378,6 @@ static int RndisFilterOnReceive(struct hv_device *Device,
 	struct rndis_message rndisMessage;
 	struct rndis_message *rndisHeader;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (!netDevice)
 		return -EINVAL;
 
@@ -398,7 +385,6 @@ static int RndisFilterOnReceive(struct hv_device *Device,
 	if (!netDevice->Extension) {
 		DPRINT_ERR(NETVSC, "got rndis message but no rndis device..."
 			  "dropping this message!");
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 
@@ -406,7 +392,6 @@ static int RndisFilterOnReceive(struct hv_device *Device,
 	if (rndisDevice->State == RNDIS_DEV_UNINITIALIZED) {
 		DPRINT_ERR(NETVSC, "got rndis message but rndis device "
 			   "uninitialized...dropping this message!");
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 
@@ -431,7 +416,6 @@ static int RndisFilterOnReceive(struct hv_device *Device,
 			   "bytes got %u)...dropping this message!",
 			   rndisHeader->MessageLength,
 			   Packet->TotalDataBufferLength);
-		DPRINT_EXIT(NETVSC);
 		return -1;
 	}
 #endif
@@ -479,7 +463,6 @@ static int RndisFilterOnReceive(struct hv_device *Device,
 		break;
 	}
 
-	DPRINT_EXIT(NETVSC);
 	return 0;
 }
 
@@ -492,8 +475,6 @@ static int RndisFilterQueryDevice(struct rndis_device *Device, u32 Oid,
 	struct rndis_query_complete *queryComplete;
 	int ret = 0;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (!Result)
 		return -EINVAL;
 
@@ -536,7 +517,6 @@ static int RndisFilterQueryDevice(struct rndis_device *Device, u32 Oid,
 Cleanup:
 	if (request)
 		PutRndisRequest(Device, request);
-	DPRINT_EXIT(NETVSC);
 
 	return ret;
 }
@@ -568,8 +548,6 @@ static int RndisFilterSetPacketFilter(struct rndis_device *Device,
 	u32 status;
 	int ret;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* ASSERT(RNDIS_MESSAGE_SIZE(struct rndis_set_request) + sizeof(u32) <= */
 	/* 	sizeof(struct rndis_message)); */
 
@@ -614,15 +592,11 @@ Cleanup:
 	if (request)
 		PutRndisRequest(Device, request);
 Exit:
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
 int RndisFilterInit(struct netvsc_driver *Driver)
 {
-	DPRINT_ENTER(NETVSC);
-
 	DPRINT_DBG(NETVSC, "sizeof(struct rndis_filter_packet) == %zd",
 		   sizeof(struct rndis_filter_packet));
 
@@ -658,8 +632,6 @@ int RndisFilterInit(struct netvsc_driver *Driver)
 	/* Driver->QueryLinkStatus = RndisFilterQueryDeviceLinkStatus; */
 	Driver->OnReceiveCallback = RndisFilterOnReceive;
 
-	DPRINT_EXIT(NETVSC);
-
 	return 0;
 }
 
@@ -671,8 +643,6 @@ static int RndisFilterInitDevice(struct rndis_device *Device)
 	u32 status;
 	int ret;
 
-	DPRINT_ENTER(NETVSC);
-
 	request = GetRndisRequest(Device, REMOTE_NDIS_INITIALIZE_MSG,
 			RNDIS_MESSAGE_SIZE(struct rndis_initialize_request));
 	if (!request) {
@@ -710,7 +680,6 @@ static int RndisFilterInitDevice(struct rndis_device *Device)
 Cleanup:
 	if (request)
 		PutRndisRequest(Device, request);
-	DPRINT_EXIT(NETVSC);
 
 	return ret;
 }
@@ -720,8 +689,6 @@ static void RndisFilterHaltDevice(struct rndis_device *Device)
 	struct rndis_request *request;
 	struct rndis_halt_request *halt;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* Attempt to do a rndis device halt */
 	request = GetRndisRequest(Device, REMOTE_NDIS_HALT_MSG,
 				RNDIS_MESSAGE_SIZE(struct rndis_halt_request));
@@ -740,7 +707,6 @@ static void RndisFilterHaltDevice(struct rndis_device *Device)
 Cleanup:
 	if (request)
 		PutRndisRequest(Device, request);
-	DPRINT_EXIT(NETVSC);
 	return;
 }
 
@@ -748,8 +714,6 @@ static int RndisFilterOpenDevice(struct rndis_device *Device)
 {
 	int ret;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (Device->State != RNDIS_DEV_INITIALIZED)
 		return 0;
 
@@ -760,7 +724,6 @@ static int RndisFilterOpenDevice(struct rndis_device *Device)
 	if (ret == 0)
 		Device->State = RNDIS_DEV_DATAINITIALIZED;
 
-	DPRINT_EXIT(NETVSC);
 	return ret;
 }
 
@@ -768,8 +731,6 @@ static int RndisFilterCloseDevice(struct rndis_device *Device)
 {
 	int ret;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (Device->State != RNDIS_DEV_DATAINITIALIZED)
 		return 0;
 
@@ -777,8 +738,6 @@ static int RndisFilterCloseDevice(struct rndis_device *Device)
 	if (ret == 0)
 		Device->State = RNDIS_DEV_INITIALIZED;
 
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
@@ -790,13 +749,9 @@ static int RndisFilterOnDeviceAdd(struct hv_device *Device,
 	struct rndis_device *rndisDevice;
 	struct netvsc_device_info *deviceInfo = AdditionalInfo;
 
-	DPRINT_ENTER(NETVSC);
-
 	rndisDevice = GetRndisDevice();
-	if (!rndisDevice) {
-		DPRINT_EXIT(NETVSC);
+	if (!rndisDevice)
 		return -1;
-	}
 
 	DPRINT_DBG(NETVSC, "rndis device object allocated - %p", rndisDevice);
 
@@ -808,7 +763,6 @@ static int RndisFilterOnDeviceAdd(struct hv_device *Device,
 	ret = gRndisFilter.InnerDriver.Base.OnDeviceAdd(Device, AdditionalInfo);
 	if (ret != 0) {
 		kfree(rndisDevice);
-		DPRINT_EXIT(NETVSC);
 		return ret;
 	}
 
@@ -849,8 +803,6 @@ static int RndisFilterOnDeviceAdd(struct hv_device *Device,
 	DPRINT_INFO(NETVSC, "Device 0x%p link state %s", rndisDevice,
 		    ((deviceInfo->LinkState) ? ("down") : ("up")));
 
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
@@ -859,8 +811,6 @@ static int RndisFilterOnDeviceRemove(struct hv_device *Device)
 	struct netvsc_device *netDevice = Device->Extension;
 	struct rndis_device *rndisDevice = netDevice->Extension;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* Halt and release the rndis device */
 	RndisFilterHaltDevice(rndisDevice);
 
@@ -870,50 +820,31 @@ static int RndisFilterOnDeviceRemove(struct hv_device *Device)
 	/* Pass control to inner driver to remove the device */
 	gRndisFilter.InnerDriver.Base.OnDeviceRemove(Device);
 
-	DPRINT_EXIT(NETVSC);
-
 	return 0;
 }
 
 static void RndisFilterOnCleanup(struct hv_driver *Driver)
 {
-	DPRINT_ENTER(NETVSC);
-
-	DPRINT_EXIT(NETVSC);
 }
 
 int RndisFilterOnOpen(struct hv_device *Device)
 {
-	int ret;
 	struct netvsc_device *netDevice = Device->Extension;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (!netDevice)
 		return -EINVAL;
 
-	ret = RndisFilterOpenDevice(netDevice->Extension);
-
-	DPRINT_EXIT(NETVSC);
-
-	return ret;
+	return RndisFilterOpenDevice(netDevice->Extension);
 }
 
 int RndisFilterOnClose(struct hv_device *Device)
 {
-	int ret;
 	struct netvsc_device *netDevice = Device->Extension;
 
-	DPRINT_ENTER(NETVSC);
-
 	if (!netDevice)
 		return -EINVAL;
 
-	ret = RndisFilterCloseDevice(netDevice->Extension);
-
-	DPRINT_EXIT(NETVSC);
-
-	return ret;
+	return RndisFilterCloseDevice(netDevice->Extension);
 }
 
 static int RndisFilterOnSend(struct hv_device *Device,
@@ -925,8 +856,6 @@ static int RndisFilterOnSend(struct hv_device *Device,
 	struct rndis_packet *rndisPacket;
 	u32 rndisMessageSize;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* Add the rndis header */
 	filterPacket = (struct rndis_filter_packet *)Packet->Extension;
 	/* ASSERT(filterPacket); */
@@ -971,8 +900,6 @@ static int RndisFilterOnSend(struct hv_device *Device,
 				filterPacket->CompletionContext;
 	}
 
-	DPRINT_EXIT(NETVSC);
-
 	return ret;
 }
 
@@ -980,19 +907,12 @@ static void RndisFilterOnSendCompletion(void *Context)
 {
 	struct rndis_filter_packet *filterPacket = Context;
 
-	DPRINT_ENTER(NETVSC);
-
 	/* Pass it back to the original handler */
 	filterPacket->OnCompletion(filterPacket->CompletionContext);
-
-	DPRINT_EXIT(NETVSC);
 }
 
 
 static void RndisFilterOnSendRequestCompletion(void *Context)
 {
-	DPRINT_ENTER(NETVSC);
-
 	/* Noop */
-	DPRINT_EXIT(NETVSC);
 }
diff --git a/drivers/staging/hv/storvsc.c b/drivers/staging/hv/storvsc.c
index 27a276e08ee..6bd2ff138d2 100644
--- a/drivers/staging/hv/storvsc.c
+++ b/drivers/staging/hv/storvsc.c
@@ -186,7 +186,6 @@ static int StorVscChannelInit(struct hv_device *Device)
 	if (!storDevice) {
 		DPRINT_ERR(STORVSC, "unable to get stor device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(STORVSC);
 		return -1;
 	}
 
@@ -344,8 +343,6 @@ Cleanup:
 	request->WaitEvent = NULL;
 nomem:
 	PutStorDevice(Device);
-
-	DPRINT_EXIT(STORVSC);
 	return ret;
 }
 
@@ -356,13 +353,10 @@ static void StorVscOnIOCompletion(struct hv_device *Device,
 	struct hv_storvsc_request *request;
 	struct storvsc_device *storDevice;
 
-	DPRINT_ENTER(STORVSC);
-
 	storDevice = MustGetStorDevice(Device);
 	if (!storDevice) {
 		DPRINT_ERR(STORVSC, "unable to get stor device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(STORVSC);
 		return;
 	}
 
@@ -414,8 +408,6 @@ static void StorVscOnIOCompletion(struct hv_device *Device,
 	atomic_dec(&storDevice->NumOutstandingRequests);
 
 	PutStorDevice(Device);
-
-	DPRINT_EXIT(STORVSC);
 }
 
 static void StorVscOnReceive(struct hv_device *Device,
@@ -449,15 +441,12 @@ static void StorVscOnChannelCallback(void *context)
 	struct storvsc_request_extension *request;
 	int ret;
 
-	DPRINT_ENTER(STORVSC);
-
 	/* ASSERT(device); */
 
 	storDevice = MustGetStorDevice(device);
 	if (!storDevice) {
 		DPRINT_ERR(STORVSC, "unable to get stor device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(STORVSC);
 		return;
 	}
 
@@ -501,8 +490,6 @@ static void StorVscOnChannelCallback(void *context)
 	} while (1);
 
 	PutStorDevice(device);
-
-	DPRINT_EXIT(STORVSC);
 	return;
 }
 
@@ -547,8 +534,6 @@ static int StorVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 	struct storvsc_device_info *deviceInfo;
 	int ret = 0;
 
-	DPRINT_ENTER(STORVSC);
-
 	deviceInfo = (struct storvsc_device_info *)AdditionalInfo;
 	storDevice = AllocStorDevice(Device);
 	if (!storDevice) {
@@ -584,8 +569,6 @@ static int StorVscOnDeviceAdd(struct hv_device *Device, void *AdditionalInfo)
 		   storDevice->TargetId);
 
 Cleanup:
-	DPRINT_EXIT(STORVSC);
-
 	return ret;
 }
 
@@ -596,8 +579,6 @@ static int StorVscOnDeviceRemove(struct hv_device *Device)
 {
 	struct storvsc_device *storDevice;
 
-	DPRINT_ENTER(STORVSC);
-
 	DPRINT_INFO(STORVSC, "disabling storage device (%p)...",
 		    Device->Extension);
 
@@ -625,8 +606,6 @@ static int StorVscOnDeviceRemove(struct hv_device *Device)
 	Device->Driver->VmbusChannelInterface.Close(Device);
 
 	FreeStorDevice(storDevice);
-
-	DPRINT_EXIT(STORVSC);
 	return 0;
 }
 
@@ -637,15 +616,12 @@ int StorVscOnHostReset(struct hv_device *Device)
 	struct vstor_packet *vstorPacket;
 	int ret;
 
-	DPRINT_ENTER(STORVSC);
-
 	DPRINT_INFO(STORVSC, "resetting host adapter...");
 
 	storDevice = GetStorDevice(Device);
 	if (!storDevice) {
 		DPRINT_ERR(STORVSC, "unable to get stor device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(STORVSC);
 		return -1;
 	}
 
@@ -687,7 +663,6 @@ int StorVscOnHostReset(struct hv_device *Device)
 
 Cleanup:
 	PutStorDevice(Device);
-	DPRINT_EXIT(STORVSC);
 	return ret;
 }
 
@@ -702,8 +677,6 @@ static int StorVscOnIORequest(struct hv_device *Device,
 	struct vstor_packet *vstorPacket;
 	int ret = 0;
 
-	DPRINT_ENTER(STORVSC);
-
 	requestExtension =
 		(struct storvsc_request_extension *)Request->Extension;
 	vstorPacket = &requestExtension->VStorPacket;
@@ -720,7 +693,6 @@ static int StorVscOnIORequest(struct hv_device *Device,
 	if (!storDevice) {
 		DPRINT_ERR(STORVSC, "unable to get stor device..."
 			   "device being destroyed?");
-		DPRINT_EXIT(STORVSC);
 		return -2;
 	}
 
@@ -786,8 +758,6 @@ static int StorVscOnIORequest(struct hv_device *Device,
 	atomic_inc(&storDevice->NumOutstandingRequests);
 
 	PutStorDevice(Device);
-
-	DPRINT_EXIT(STORVSC);
 	return ret;
 }
 
@@ -796,8 +766,6 @@ static int StorVscOnIORequest(struct hv_device *Device,
  */
 static void StorVscOnCleanup(struct hv_driver *Driver)
 {
-	DPRINT_ENTER(STORVSC);
-	DPRINT_EXIT(STORVSC);
 }
 
 /*
@@ -807,8 +775,6 @@ int StorVscInitialize(struct hv_driver *Driver)
 {
 	struct storvsc_driver_object *storDriver;
 
-	DPRINT_ENTER(STORVSC);
-
 	storDriver = (struct storvsc_driver_object *)Driver;
 
 	DPRINT_DBG(STORVSC, "sizeof(STORVSC_REQUEST)=%zd "
@@ -852,7 +818,5 @@ int StorVscInitialize(struct hv_driver *Driver)
 
 	storDriver->OnIORequest		= StorVscOnIORequest;
 
-	DPRINT_EXIT(STORVSC);
-
 	return 0;
 }
diff --git a/drivers/staging/hv/storvsc_drv.c b/drivers/staging/hv/storvsc_drv.c
index d22e35f598b..075b61bd492 100644
--- a/drivers/staging/hv/storvsc_drv.c
+++ b/drivers/staging/hv/storvsc_drv.c
@@ -141,8 +141,6 @@ static int storvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	struct storvsc_driver_object *storvsc_drv_obj = &g_storvsc_drv.drv_obj;
 	struct driver_context *drv_ctx = &g_storvsc_drv.drv_ctx;
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	vmbus_get_interface(&storvsc_drv_obj->Base.VmbusChannelInterface);
 
 	storvsc_drv_obj->RingBufferSize = storvsc_ringbuffer_size;
@@ -175,8 +173,6 @@ static int storvsc_drv_init(int (*drv_init)(struct hv_driver *drv))
 	/* The driver belongs to vmbus */
 	ret = vmbus_child_driver_register(drv_ctx);
 
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return ret;
 }
 
@@ -194,8 +190,6 @@ static void storvsc_drv_exit(void)
 	struct device *current_dev = NULL;
 	int ret;
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	while (1) {
 		current_dev = NULL;
 
@@ -219,9 +213,6 @@ static void storvsc_drv_exit(void)
 		storvsc_drv_obj->Base.OnCleanup(&storvsc_drv_obj->Base);
 
 	vmbus_child_driver_unregister(drv_ctx);
-
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return;
 }
 
@@ -243,8 +234,6 @@ static int storvsc_probe(struct device *device)
 	struct host_device_context *host_device_ctx;
 	struct storvsc_device_info device_info;
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	if (!storvsc_drv_obj->Base.OnDeviceAdd)
 		return -1;
 
@@ -271,8 +260,6 @@ static int storvsc_probe(struct device *device)
 
 	if (!host_device_ctx->request_pool) {
 		scsi_host_put(host);
-		DPRINT_EXIT(STORVSC_DRV);
-
 		return -ENOMEM;
 	}
 
@@ -284,8 +271,6 @@ static int storvsc_probe(struct device *device)
 		DPRINT_ERR(STORVSC_DRV, "unable to add scsi vsc device");
 		kmem_cache_destroy(host_device_ctx->request_pool);
 		scsi_host_put(host);
-		DPRINT_EXIT(STORVSC_DRV);
-
 		return -1;
 	}
 
@@ -309,15 +294,10 @@ static int storvsc_probe(struct device *device)
 
 		kmem_cache_destroy(host_device_ctx->request_pool);
 		scsi_host_put(host);
-		DPRINT_EXIT(STORVSC_DRV);
-
 		return -1;
 	}
 
 	scsi_scan_host(host);
-
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return ret;
 }
 
@@ -340,12 +320,8 @@ static int storvsc_remove(struct device *device)
 			(struct host_device_context *)host->hostdata;
 
 
-	DPRINT_ENTER(STORVSC_DRV);
-
-	if (!storvsc_drv_obj->Base.OnDeviceRemove) {
-		DPRINT_EXIT(STORVSC_DRV);
+	if (!storvsc_drv_obj->Base.OnDeviceRemove)
 		return -1;
-	}
 
 	/*
 	 * Call to the vsc driver to let it know that the device is being
@@ -368,9 +344,6 @@ static int storvsc_remove(struct device *device)
 
 	DPRINT_INFO(STORVSC, "releasing host adapter (%p)...", host);
 	scsi_host_put(host);
-
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return ret;
 }
 
@@ -393,8 +366,6 @@ static void storvsc_commmand_completion(struct hv_storvsc_request *request)
 	/*        (unsigned long)cmd_request); */
 	/* ASSERT(scmnd->scsi_done); */
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	if (cmd_request->bounce_sgl_count) {
 		/* using bounce buffer */
 		/* printk("copy_from_bounce_buffer\n"); */
@@ -427,8 +398,6 @@ static void storvsc_commmand_completion(struct hv_storvsc_request *request)
 	scsi_done_fn(scmnd);
 
 	kmem_cache_free(host_device_ctx->request_pool, cmd_request);
-
-	DPRINT_EXIT(STORVSC_DRV);
 }
 
 static int do_bounce_buffer(struct scatterlist *sgl, unsigned int sg_count)
@@ -647,8 +616,6 @@ static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
 	int i;
 	struct scatterlist *sgl;
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	DPRINT_DBG(STORVSC_DRV, "scmnd %p dir %d, use_sg %d buf %p len %d "
 		   "queue depth %d tagged %d", scmnd, scmnd->sc_data_direction,
 		   scsi_sg_count(scmnd), scsi_sglist(scmnd),
@@ -812,8 +779,6 @@ retry_request:
 		ret = SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return ret;
 }
 
@@ -873,23 +838,17 @@ static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd)
 		(struct host_device_context *)scmnd->device->host->hostdata;
 	struct vm_device *device_ctx = host_device_ctx->device_ctx;
 
-	DPRINT_ENTER(STORVSC_DRV);
-
 	DPRINT_INFO(STORVSC_DRV, "sdev (%p) dev obj (%p) - host resetting...",
 		    scmnd->device, &device_ctx->device_obj);
 
 	/* Invokes the vsc to reset the host/bus */
 	ret = StorVscOnHostReset(&device_ctx->device_obj);
-	if (ret != 0) {
-		DPRINT_EXIT(STORVSC_DRV);
+	if (ret != 0)
 		return ret;
-	}
 
 	DPRINT_INFO(STORVSC_DRV, "sdev (%p) dev obj (%p) - host reseted",
 		    scmnd->device, &device_ctx->device_obj);
 
-	DPRINT_EXIT(STORVSC_DRV);
-
 	return ret;
 }
 
@@ -977,18 +936,14 @@ static int __init storvsc_init(void)
 {
 	int ret;
 
-	DPRINT_ENTER(STORVSC_DRV);
 	DPRINT_INFO(STORVSC_DRV, "Storvsc initializing....");
 	ret = storvsc_drv_init(StorVscInitialize);
-	DPRINT_EXIT(STORVSC_DRV);
 	return ret;
 }
 
 static void __exit storvsc_exit(void)
 {
-	DPRINT_ENTER(STORVSC_DRV);
 	storvsc_drv_exit();
-	DPRINT_ENTER(STORVSC_DRV);
 }
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/hv/vmbus.c b/drivers/staging/hv/vmbus.c
index 007543bdb41..ca1e18a6200 100644
--- a/drivers/staging/hv/vmbus.c
+++ b/drivers/staging/hv/vmbus.c
@@ -57,9 +57,7 @@ static struct hv_device *gDevice; /* vmbus root device */
  */
 static void VmbusGetChannelOffers(void)
 {
-	DPRINT_ENTER(VMBUS);
 	VmbusChannelRequestOffers();
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -120,8 +118,6 @@ static int VmbusOnDeviceAdd(struct hv_device *dev, void *AdditionalInfo)
 	u32 *irqvector = AdditionalInfo;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
-
 	gDevice = dev;
 
 	memcpy(&gDevice->deviceType, &gVmbusDeviceType, sizeof(struct hv_guid));
@@ -136,8 +132,6 @@ static int VmbusOnDeviceAdd(struct hv_device *dev, void *AdditionalInfo)
 	ret = VmbusConnect();
 
 	/* VmbusSendEvent(device->localPortId+1); */
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -148,12 +142,9 @@ static int VmbusOnDeviceRemove(struct hv_device *dev)
 {
 	int ret = 0;
 
-	DPRINT_ENTER(VMBUS);
 	VmbusChannelReleaseUnattachedChannels();
 	VmbusDisconnect();
 	on_each_cpu(HvSynicCleanup, NULL, 1);
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
 
@@ -164,9 +155,7 @@ static void VmbusOnCleanup(struct hv_driver *drv)
 {
 	/* struct vmbus_driver *driver = (struct vmbus_driver *)drv; */
 
-	DPRINT_ENTER(VMBUS);
 	HvCleanup();
-	DPRINT_EXIT(VMBUS);
 }
 
 /*
@@ -239,8 +228,6 @@ static int VmbusOnISR(struct hv_driver *drv)
 	page_addr = gHvContext.synICMessagePage[cpu];
 	msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT;
 
-	DPRINT_ENTER(VMBUS);
-
 	/* Check if there are actual msgs to be process */
 	if (msg->Header.MessageType != HvMessageTypeNone) {
 		DPRINT_DBG(VMBUS, "received msg type %d size %d",
@@ -259,7 +246,6 @@ static int VmbusOnISR(struct hv_driver *drv)
 		ret |= 0x2;
 	}
 
-	DPRINT_EXIT(VMBUS);
 	return ret;
 }
 
@@ -271,8 +257,6 @@ int VmbusInitialize(struct hv_driver *drv)
 	struct vmbus_driver *driver = (struct vmbus_driver *)drv;
 	int ret;
 
-	DPRINT_ENTER(VMBUS);
-
 	DPRINT_INFO(VMBUS, "+++++++ HV Driver version = %s +++++++",
 		    HV_DRV_VERSION);
 	DPRINT_INFO(VMBUS, "+++++++ Vmbus supported version = %d +++++++",
@@ -305,7 +289,5 @@ int VmbusInitialize(struct hv_driver *drv)
 				ret);
 	gDriver = drv;
 
-	DPRINT_EXIT(VMBUS);
-
 	return ret;
 }
diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c
index 22c80ece638..092f02ed6be 100644
--- a/drivers/staging/hv/vmbus_drv.c
+++ b/drivers/staging/hv/vmbus_drv.c
@@ -254,8 +254,6 @@ static int vmbus_bus_init(int (*drv_init)(struct hv_driver *drv))
 	int ret;
 	unsigned int vector;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/*
 	 * Set this up to allow lower layer to callback to add/remove child
 	 * devices on the bus
@@ -360,8 +358,6 @@ static int vmbus_bus_init(int (*drv_init)(struct hv_driver *drv))
 	wait_for_completion(&hv_channel_ready);
 
 cleanup:
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return ret;
 }
 
@@ -377,8 +373,6 @@ static void vmbus_bus_exit(void)
 
 	struct vm_device *dev_ctx = &g_vmbus_drv.device_ctx;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* Remove the root device */
 	if (vmbus_drv_obj->Base.OnDeviceRemove)
 		vmbus_drv_obj->Base.OnDeviceRemove(&dev_ctx->device_obj);
@@ -395,10 +389,6 @@ static void vmbus_bus_exit(void)
 
 	tasklet_kill(&vmbus_drv_ctx->msg_dpc);
 	tasklet_kill(&vmbus_drv_ctx->event_dpc);
-
-	DPRINT_EXIT(VMBUS_DRV);
-
-	return;
 }
 
 
@@ -419,8 +409,6 @@ int vmbus_child_driver_register(struct driver_context *driver_ctx)
 	struct vmbus_driver *vmbus_drv_obj = &g_vmbus_drv.drv_obj;
 	int ret;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_INFO(VMBUS_DRV, "child driver (%p) registering - name %s",
 		    driver_ctx, driver_ctx->driver.name);
 
@@ -431,8 +419,6 @@ int vmbus_child_driver_register(struct driver_context *driver_ctx)
 
 	vmbus_drv_obj->GetChannelOffers();
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return ret;
 }
 EXPORT_SYMBOL(vmbus_child_driver_register);
@@ -450,16 +436,12 @@ EXPORT_SYMBOL(vmbus_child_driver_register);
  */
 void vmbus_child_driver_unregister(struct driver_context *driver_ctx)
 {
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_INFO(VMBUS_DRV, "child driver (%p) unregistering - name %s",
 		    driver_ctx, driver_ctx->driver.name);
 
 	driver_unregister(&driver_ctx->driver);
 
 	driver_ctx->driver.bus = NULL;
-
-	DPRINT_EXIT(VMBUS_DRV);
 }
 EXPORT_SYMBOL(vmbus_child_driver_unregister);
 
@@ -506,15 +488,11 @@ static struct hv_device *vmbus_child_device_create(struct hv_guid *type,
 	struct vm_device *child_device_ctx;
 	struct hv_device *child_device_obj;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* Allocate the new child device */
 	child_device_ctx = kzalloc(sizeof(struct vm_device), GFP_KERNEL);
 	if (!child_device_ctx) {
 		DPRINT_ERR(VMBUS_DRV,
 			"unable to allocate device_context for child device");
-		DPRINT_EXIT(VMBUS_DRV);
-
 		return NULL;
 	}
 
@@ -546,8 +524,6 @@ static struct hv_device *vmbus_child_device_create(struct hv_guid *type,
 	memcpy(&child_device_ctx->class_id, type, sizeof(struct hv_guid));
 	memcpy(&child_device_ctx->device_id, instance, sizeof(struct hv_guid));
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return child_device_obj;
 }
 
@@ -564,8 +540,6 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj,
 				to_vm_device(child_device_obj);
 	static atomic_t device_num = ATOMIC_INIT(0);
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_DBG(VMBUS_DRV, "child device (%p) registering",
 		   child_device_ctx);
 
@@ -594,8 +568,6 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj,
 		DPRINT_INFO(VMBUS_DRV, "child device (%p) registered",
 			    &child_device_ctx->device);
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return ret;
 }
 
@@ -607,8 +579,6 @@ static void vmbus_child_device_unregister(struct hv_device *device_obj)
 {
 	struct vm_device *device_ctx = to_vm_device(device_obj);
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_INFO(VMBUS_DRV, "unregistering child device (%p)",
 		    &device_ctx->device);
 
@@ -620,8 +590,6 @@ static void vmbus_child_device_unregister(struct hv_device *device_obj)
 
 	DPRINT_INFO(VMBUS_DRV, "child device (%p) unregistered",
 		    &device_ctx->device);
-
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 /*
@@ -629,9 +597,6 @@ static void vmbus_child_device_unregister(struct hv_device *device_obj)
  */
 static void vmbus_child_device_destroy(struct hv_device *device_obj)
 {
-	DPRINT_ENTER(VMBUS_DRV);
-
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 /*
@@ -646,8 +611,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 	struct vm_device *device_ctx = device_to_vm_device(device);
 	int ret;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_INFO(VMBUS_DRV, "generating uevent - VMBUS_DEVICE_CLASS_GUID={"
 		    "%02x%02x%02x%02x-%02x%02x-%02x%02x-"
 		    "%02x%02x%02x%02x%02x%02x%02x%02x}",
@@ -708,8 +671,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
 	if (ret)
 		return ret;
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return 0;
 }
 
@@ -722,8 +683,6 @@ static int vmbus_match(struct device *device, struct device_driver *driver)
 	struct driver_context *driver_ctx = driver_to_driver_context(driver);
 	struct vm_device *device_ctx = device_to_vm_device(device);
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* We found our driver ? */
 	if (memcmp(&device_ctx->class_id, &driver_ctx->class_id,
 		   sizeof(struct hv_guid)) == 0) {
@@ -742,9 +701,6 @@ static int vmbus_match(struct device *device, struct device_driver *driver)
 
 		match = 1;
 	}
-
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return match;
 }
 
@@ -759,8 +715,6 @@ static void vmbus_probe_failed_cb(struct work_struct *context)
 {
 	struct vm_device *device_ctx = (struct vm_device *)context;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/*
 	 * Kick off the process of unregistering the device.
 	 * This will call vmbus_remove() and eventually vmbus_device_release()
@@ -768,7 +722,6 @@ static void vmbus_probe_failed_cb(struct work_struct *context)
 	device_unregister(&device_ctx->device);
 
 	/* put_device(&device_ctx->device); */
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 /*
@@ -782,8 +735,6 @@ static int vmbus_probe(struct device *child_device)
 	struct vm_device *device_ctx =
 			device_to_vm_device(child_device);
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* Let the specific open-source driver handles the probe if it can */
 	if (driver_ctx->probe) {
 		ret = device_ctx->probe_error = driver_ctx->probe(child_device);
@@ -802,8 +753,6 @@ static int vmbus_probe(struct device *child_device)
 			   child_device->driver->name);
 		ret = -1;
 	}
-
-	DPRINT_EXIT(VMBUS_DRV);
 	return ret;
 }
 
@@ -815,15 +764,12 @@ static int vmbus_remove(struct device *child_device)
 	int ret;
 	struct driver_context *driver_ctx;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* Special case root bus device */
 	if (child_device->parent == NULL) {
 		/*
 		 * No-op since it is statically defined and handle in
 		 * vmbus_bus_exit()
 		 */
-		DPRINT_EXIT(VMBUS_DRV);
 		return 0;
 	}
 
@@ -844,8 +790,6 @@ static int vmbus_remove(struct device *child_device)
 		}
 	}
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return 0;
 }
 
@@ -856,23 +800,18 @@ static void vmbus_shutdown(struct device *child_device)
 {
 	struct driver_context *driver_ctx;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* Special case root bus device */
 	if (child_device->parent == NULL) {
 		/*
 		 * No-op since it is statically defined and handle in
 		 * vmbus_bus_exit()
 		 */
-		DPRINT_EXIT(VMBUS_DRV);
 		return;
 	}
 
 	/* The device may not be attached yet */
-	if (!child_device->driver) {
-		DPRINT_EXIT(VMBUS_DRV);
+	if (!child_device->driver)
 		return;
-	}
 
 	driver_ctx = driver_to_driver_context(child_device->driver);
 
@@ -880,8 +819,6 @@ static void vmbus_shutdown(struct device *child_device)
 	if (driver_ctx->shutdown)
 		driver_ctx->shutdown(child_device);
 
-	DPRINT_EXIT(VMBUS_DRV);
-
 	return;
 }
 
@@ -890,13 +827,11 @@ static void vmbus_shutdown(struct device *child_device)
  */
 static void vmbus_bus_release(struct device *device)
 {
-	DPRINT_ENTER(VMBUS_DRV);
 	/* FIXME */
 	/* Empty release functions are a bug, or a major sign
 	 * of a problem design, this MUST BE FIXED! */
 	dev_err(device, "%s needs to be fixed!\n", __func__);
 	WARN_ON(1);
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 /*
@@ -906,15 +841,10 @@ static void vmbus_device_release(struct device *device)
 {
 	struct vm_device *device_ctx = device_to_vm_device(device);
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* vmbus_child_device_destroy(&device_ctx->device_obj); */
 	kfree(device_ctx);
 
 	/* !!DO NOT REFERENCE device_ctx anymore at this point!! */
-	DPRINT_EXIT(VMBUS_DRV);
-
-	return;
 }
 
 /*
@@ -924,14 +854,10 @@ static void vmbus_msg_dpc(unsigned long data)
 {
 	struct vmbus_driver *vmbus_drv_obj = (struct vmbus_driver *)data;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* ASSERT(vmbus_drv_obj->OnMsgDpc != NULL); */
 
 	/* Call to bus driver to handle interrupt */
 	vmbus_drv_obj->OnMsgDpc(&vmbus_drv_obj->Base);
-
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 /*
@@ -941,14 +867,10 @@ static void vmbus_event_dpc(unsigned long data)
 {
 	struct vmbus_driver *vmbus_drv_obj = (struct vmbus_driver *)data;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* ASSERT(vmbus_drv_obj->OnEventDpc != NULL); */
 
 	/* Call to bus driver to handle interrupt */
 	vmbus_drv_obj->OnEventDpc(&vmbus_drv_obj->Base);
-
-	DPRINT_EXIT(VMBUS_DRV);
 }
 
 static irqreturn_t vmbus_isr(int irq, void *dev_id)
@@ -956,8 +878,6 @@ static irqreturn_t vmbus_isr(int irq, void *dev_id)
 	struct vmbus_driver *vmbus_driver_obj = &g_vmbus_drv.drv_obj;
 	int ret;
 
-	DPRINT_ENTER(VMBUS_DRV);
-
 	/* ASSERT(vmbus_driver_obj->OnIsr != NULL); */
 
 	/* Call to bus driver to handle interrupt */
@@ -971,10 +891,8 @@ static irqreturn_t vmbus_isr(int irq, void *dev_id)
 		if (test_bit(1, (unsigned long *)&ret))
 			tasklet_schedule(&g_vmbus_drv.event_dpc);
 
-		DPRINT_EXIT(VMBUS_DRV);
 		return IRQ_HANDLED;
 	} else {
-		DPRINT_EXIT(VMBUS_DRV);
 		return IRQ_NONE;
 	}
 }
@@ -994,10 +912,6 @@ MODULE_DEVICE_TABLE(dmi, microsoft_hv_dmi_table);
 
 static int __init vmbus_init(void)
 {
-	int ret = 0;
-
-	DPRINT_ENTER(VMBUS_DRV);
-
 	DPRINT_INFO(VMBUS_DRV,
 		"Vmbus initializing.... current log level 0x%x (%x,%x)",
 		vmbus_loglevel, HIWORD(vmbus_loglevel), LOWORD(vmbus_loglevel));
@@ -1006,20 +920,13 @@ static int __init vmbus_init(void)
 	if (!dmi_check_system(microsoft_hv_dmi_table))
 		return -ENODEV;
 
-	ret = vmbus_bus_init(VmbusInitialize);
-
-	DPRINT_EXIT(VMBUS_DRV);
-	return ret;
+	return vmbus_bus_init(VmbusInitialize);
 }
 
 static void __exit vmbus_exit(void)
 {
-	DPRINT_ENTER(VMBUS_DRV);
-
 	vmbus_bus_exit();
 	/* Todo: it is used for loglevel, to be ported to new kernel. */
-	DPRINT_EXIT(VMBUS_DRV);
-	return;
 }
 
 /*
@@ -1028,7 +935,7 @@ static void __exit vmbus_exit(void)
  * installed and/or configured.  We don't do anything else with the table, but
  * it needs to be present.
  */
-const static struct pci_device_id microsoft_hv_pci_table[] = {
+static const struct pci_device_id microsoft_hv_pci_table[] = {
 	{ PCI_DEVICE(0x1414, 0x5353) },	/* VGA compatible controller */
 	{ 0 }
 };
diff --git a/drivers/staging/iio/Documentation/overview.txt b/drivers/staging/iio/Documentation/overview.txt
index e39dfc1705a..cc6ecad4035 100644
--- a/drivers/staging/iio/Documentation/overview.txt
+++ b/drivers/staging/iio/Documentation/overview.txt
@@ -44,7 +44,7 @@ which the raw data it self may be read back.
 applications it it useful to be able to capture data based on some
 external signal (trigger).  These triggers might be a data ready
 signal, a gpio line connected to some external system or an on
-processor periodic interrupt.  A single trigger many initialize data
+processor periodic interrupt.  A single trigger may initialize data
 capture or reading from a number of sensors.  These triggers are
 used in iio to fill software ring buffers acting in a very similar
 fashion to the hardware buffers described above.
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index b0e62449c62..ed48815a916 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -21,6 +21,7 @@ config IIO_RING_BUFFER
 if IIO_RING_BUFFER
 
 config IIO_SW_RING
+       select IIO_TRIGGER
 	tristate "Industrial I/O lock free software ring"
 	help
 	  Example software ring buffer implementation.  The design aim
@@ -44,6 +45,7 @@ source "drivers/staging/iio/adc/Kconfig"
 source "drivers/staging/iio/gyro/Kconfig"
 source "drivers/staging/iio/imu/Kconfig"
 source "drivers/staging/iio/light/Kconfig"
+source "drivers/staging/iio/magnetometer/Kconfig"
 
 source "drivers/staging/iio/trigger/Kconfig"
 
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 3502b39f084..e909674920f 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -14,5 +14,5 @@ obj-y += adc/
 obj-y += gyro/
 obj-y += imu/
 obj-y += light/
-
-obj-y += trigger/
\ No newline at end of file
+obj-y += trigger/
+obj-y += magnetometer/
diff --git a/drivers/staging/iio/TODO b/drivers/staging/iio/TODO
index 15da0c2bb78..898cba1c939 100644
--- a/drivers/staging/iio/TODO
+++ b/drivers/staging/iio/TODO
@@ -66,4 +66,4 @@ Documentation
 2) Some device require indvidual docs.
 
 Contact: Jonathan Cameron <jic23@cam.ac.uk>.
-Mailing list: LKML.
+Mailing list: linux-iio@vger.kernel.org
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
index b4e57d1bc87..5926c03be1a 100644
--- a/drivers/staging/iio/accel/Kconfig
+++ b/drivers/staging/iio/accel/Kconfig
@@ -4,29 +4,29 @@
 comment "Accelerometers"
 
 config ADIS16209
-       tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
-       depends on SPI
-       select IIO_TRIGGER if IIO_RING_BUFFER
-       select IIO_SW_RING if IIO_RING_BUFFER
-       help
-         Say yes here to build support for Analog Devices adis16209 dual-axis digital inclinometer
-	 and accelerometer.
+	tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
+	depends on SPI
+	select IIO_TRIGGER if IIO_RING_BUFFER
+	select IIO_SW_RING if IIO_RING_BUFFER
+	help
+	  Say yes here to build support for Analog Devices adis16209 dual-axis digital inclinometer
+	  and accelerometer.
 
 config ADIS16220
-       tristate "Analog Devices ADIS16220 Programmable Digital Vibration Sensor driver"
-       depends on SPI
-       help
-         Say yes here to build support for Analog Devices adis16220 programmable
-         digital vibration sensor.
+	tristate "Analog Devices ADIS16220 Programmable Digital Vibration Sensor"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices adis16220 programmable
+	  digital vibration sensor.
 
 config ADIS16240
-       tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder"
-       depends on SPI
-       select IIO_TRIGGER if IIO_RING_BUFFER
-       select IIO_SW_RING if IIO_RING_BUFFER
-       help
-         Say yes here to build support for Analog Devices adis16240 programmable
-	 impact Sensor and recorder.
+	tristate "Analog Devices ADIS16240 Programmable Impact Sensor and Recorder"
+	depends on SPI
+	select IIO_TRIGGER if IIO_RING_BUFFER
+	select IIO_SW_RING if IIO_RING_BUFFER
+	help
+	  Say yes here to build support for Analog Devices adis16240 programmable
+	  impact Sensor and recorder.
 
 config KXSD9
 	tristate "Kionix KXSD9 Accelerometer Driver"
@@ -46,9 +46,9 @@ config LIS3L02DQ
 	  and an event interface via a character device.
 
 config SCA3000
-       depends on IIO_RING_BUFFER
-       depends on SPI
-       tristate "VTI SCA3000 series accelerometers"
-       help
-         Say yes here to build support for the VTI SCA3000 series of SPI
-	 accelerometers. These devices use a hardware ring buffer.
\ No newline at end of file
+	depends on IIO_RING_BUFFER
+	depends on SPI
+	tristate "VTI SCA3000 series accelerometers"
+	help
+	  Say yes here to build support for the VTI SCA3000 series of SPI
+	  accelerometers. These devices use a hardware ring buffer.
diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile
index c34b13634c2..ff84703a16f 100644
--- a/drivers/staging/iio/accel/Makefile
+++ b/drivers/staging/iio/accel/Makefile
@@ -1,6 +1,7 @@
 #
 # Makefile for industrial I/O accelerometer drivers
 #
+
 adis16209-y             := adis16209_core.o
 adis16209-$(CONFIG_IIO_RING_BUFFER) += adis16209_ring.o adis16209_trigger.o
 obj-$(CONFIG_ADIS16209) += adis16209.o
@@ -19,4 +20,4 @@ lis3l02dq-$(CONFIG_IIO_RING_BUFFER) += lis3l02dq_ring.o
 obj-$(CONFIG_LIS3L02DQ)	+= lis3l02dq.o
 
 sca3000-y		:= sca3000_core.o sca3000_ring.o
-obj-$(CONFIG_SCA3000)	+= sca3000.o
\ No newline at end of file
+obj-$(CONFIG_SCA3000)	+= sca3000.o
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 877fd2a4838..4e97596620e 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -105,8 +105,6 @@
  * struct adis16209_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
- * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
@@ -117,7 +115,6 @@
 struct adis16209_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -129,16 +126,15 @@ struct adis16209_state {
 int adis16209_set_irq(struct device *dev, bool enable);
 
 #ifdef CONFIG_IIO_RING_BUFFER
-enum adis16209_scan {
-	ADIS16209_SCAN_SUPPLY,
-	ADIS16209_SCAN_ACC_X,
-	ADIS16209_SCAN_ACC_Y,
-	ADIS16209_SCAN_AUX_ADC,
-	ADIS16209_SCAN_TEMP,
-	ADIS16209_SCAN_INCLI_X,
-	ADIS16209_SCAN_INCLI_Y,
-	ADIS16209_SCAN_ROT,
-};
+
+#define ADIS16209_SCAN_SUPPLY	0
+#define ADIS16209_SCAN_ACC_X	1
+#define ADIS16209_SCAN_ACC_Y	2
+#define ADIS16209_SCAN_AUX_ADC	3
+#define ADIS16209_SCAN_TEMP	4
+#define ADIS16209_SCAN_INCLI_X	5
+#define ADIS16209_SCAN_INCLI_Y	6
+#define ADIS16209_SCAN_ROT	7
 
 void adis16209_remove_trigger(struct iio_dev *indio_dev);
 int adis16209_probe_trigger(struct iio_dev *indio_dev);
@@ -150,8 +146,6 @@ ssize_t adis16209_read_data_from_ring(struct device *dev,
 int adis16209_configure_ring(struct iio_dev *indio_dev);
 void adis16209_unconfigure_ring(struct iio_dev *indio_dev);
 
-int adis16209_initialize_ring(struct iio_ring_buffer *ring);
-void adis16209_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
 static inline void adis16209_remove_trigger(struct iio_dev *indio_dev)
@@ -180,14 +174,5 @@ static inline void adis16209_unconfigure_ring(struct iio_dev *indio_dev)
 {
 }
 
-static inline int adis16209_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-}
-
-static inline void adis16209_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_ADIS16209_H_ */
diff --git a/drivers/staging/iio/accel/adis16209_core.c b/drivers/staging/iio/accel/adis16209_core.c
index ac375c50f56..6c6923f2eaa 100644
--- a/drivers/staging/iio/accel/adis16209_core.c
+++ b/drivers/staging/iio/accel/adis16209_core.c
@@ -14,12 +14,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "accel.h"
 #include "inclinometer.h"
 #include "../gyro/gyro.h"
@@ -76,11 +77,13 @@ static int adis16209_spi_write_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
+			.delay_usecs = 30,
 		}, {
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
+			.delay_usecs = 30,
 		},
 	};
 
@@ -120,13 +123,13 @@ static int adis16209_spi_read_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 20,
+			.delay_usecs = 30,
 		}, {
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 20,
+			.delay_usecs = 30,
 		},
 	};
 
@@ -518,7 +521,7 @@ static int __devinit adis16209_probe(struct spi_device *spi)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = adis16209_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
@@ -550,7 +553,7 @@ error_unregister_line:
 	if (spi->irq)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16209_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16209_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -579,7 +582,7 @@ static int adis16209_remove(struct spi_device *spi)
 	if (spi->irq)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16209_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	iio_device_unregister(indio_dev);
 	adis16209_unconfigure_ring(indio_dev);
 	kfree(st->tx);
diff --git a/drivers/staging/iio/accel/adis16209_ring.c b/drivers/staging/iio/accel/adis16209_ring.c
index 533e2857491..25fde659d09 100644
--- a/drivers/staging/iio/accel/adis16209_ring.c
+++ b/drivers/staging/iio/accel/adis16209_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,16 +17,6 @@
 #include "../trigger.h"
 #include "adis16209.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
 static IIO_SCAN_EL_C(supply, ADIS16209_SCAN_SUPPLY, IIO_UNSIGNED(14),
 		     ADIS16209_SUPPLY_OUT, NULL);
 static IIO_SCAN_EL_C(accel_x, ADIS16209_SCAN_ACC_X, IIO_SIGNED(14),
@@ -67,10 +58,10 @@ static struct attribute_group adis16209_scan_el_group = {
  * adis16209_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16209_poll_func_th(struct iio_dev *indio_dev)
+static void adis16209_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16209_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 }
 
@@ -138,10 +129,9 @@ static void adis16209_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16209_read_ring_data(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-							  st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i] = be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -157,50 +147,6 @@ static void adis16209_trigger_bh_to_ring(struct work_struct *work_s)
 	return;
 }
 
-/* in these circumstances is it better to go with unaligned packing and
- * deal with the cost?*/
-static int adis16209_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count)
-				/* Timestamp (aligned to s64) and data */
-				size = (((indio_dev->scan_count * sizeof(s16))
-					 + sizeof(s64) - 1)
-					& ~(sizeof(s64) - 1))
-					+ sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16209_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-					       indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16209_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-						indio_dev->pollfunc)
-		: 0;
-}
-
 void adis16209_unconfigure_ring(struct iio_dev *indio_dev)
 {
 	kfree(indio_dev->pollfunc);
@@ -235,18 +181,16 @@ int adis16209_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16209_data_rdy_ring_preenable;
-	ring->postenable = &adis16209_data_rdy_ring_postenable;
-	ring->predisable = &adis16209_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16209_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16209_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -254,13 +198,3 @@ error_iio_sw_rb_free:
 	iio_sw_rb_free(indio_dev->ring);
 	return ret;
 }
-
-int adis16209_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16209_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/accel/adis16209_trigger.c b/drivers/staging/iio/accel/adis16209_trigger.c
index 4a0507c9a13..1487effa2e3 100644
--- a/drivers/staging/iio/accel/adis16209_trigger.c
+++ b/drivers/staging/iio/accel/adis16209_trigger.c
@@ -23,8 +23,7 @@ static int adis16209_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16209_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -83,14 +82,13 @@ int adis16209_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16209_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16209-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16209-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/accel/adis16220.h b/drivers/staging/iio/accel/adis16220.h
index 2abf4850b37..7013314a9d7 100644
--- a/drivers/staging/iio/accel/adis16220.h
+++ b/drivers/staging/iio/accel/adis16220.h
@@ -127,7 +127,6 @@
  * struct adis16220_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index 6de439fd167..bb7d76539cd 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -14,7 +14,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -72,13 +72,13 @@ static int adis16220_spi_write_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -118,13 +118,13 @@ static int adis16220_spi_read_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -291,9 +291,9 @@ static int adis16220_check_status(struct device *dev)
 	if (status & ADIS16220_DIAG_STAT_FLASH_UPT)
 		dev_err(dev, "Flash update failed\n");
 	if (status & ADIS16220_DIAG_STAT_POWER_HIGH)
-		dev_err(dev, "Power supply above 5.25V\n");
+		dev_err(dev, "Power supply above 3.625V\n");
 	if (status & ADIS16220_DIAG_STAT_POWER_LOW)
-		dev_err(dev, "Power supply below 4.75V\n");
+		dev_err(dev, "Power supply below 3.15V\n");
 
 error_ret:
 	return ret;
@@ -414,7 +414,7 @@ static ssize_t adis16220_capture_buffer_read(struct adis16220_state *st,
 	return count;
 }
 
-static ssize_t adis16220_accel_bin_read(struct kobject *kobj,
+static ssize_t adis16220_accel_bin_read(struct file *filp, struct kobject *kobj,
 					struct bin_attribute *attr,
 					char *buf,
 					loff_t off,
@@ -438,7 +438,7 @@ static struct bin_attribute accel_bin = {
 	.size = ADIS16220_CAPTURE_SIZE,
 };
 
-static ssize_t adis16220_adc1_bin_read(struct kobject *kobj,
+static ssize_t adis16220_adc1_bin_read(struct file *filp, struct kobject *kobj,
 				struct bin_attribute *attr,
 				char *buf, loff_t off,
 				size_t count)
@@ -461,7 +461,7 @@ static struct bin_attribute adc1_bin = {
 	.size = ADIS16220_CAPTURE_SIZE,
 };
 
-static ssize_t adis16220_adc2_bin_read(struct kobject *kobj,
+static ssize_t adis16220_adc2_bin_read(struct file *filp, struct kobject *kobj,
 				struct bin_attribute *attr,
 				char *buf, loff_t off,
 				size_t count)
diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h
index dcff43c7523..51a807dde27 100644
--- a/drivers/staging/iio/accel/adis16240.h
+++ b/drivers/staging/iio/accel/adis16240.h
@@ -127,7 +127,6 @@
  * struct adis16240_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
@@ -139,7 +138,6 @@
 struct adis16240_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -155,14 +153,12 @@ int adis16240_set_irq(struct device *dev, bool enable);
  * filling. This may change!
  */
 
-enum adis16240_scan {
-	ADIS16240_SCAN_SUPPLY,
-	ADIS16240_SCAN_ACC_X,
-	ADIS16240_SCAN_ACC_Y,
-	ADIS16240_SCAN_ACC_Z,
-	ADIS16240_SCAN_AUX_ADC,
-	ADIS16240_SCAN_TEMP,
-};
+#define ADIS16240_SCAN_SUPPLY	0
+#define ADIS16240_SCAN_ACC_X	1
+#define ADIS16240_SCAN_ACC_Y	2
+#define ADIS16240_SCAN_ACC_Z	3
+#define ADIS16240_SCAN_AUX_ADC	4
+#define ADIS16240_SCAN_TEMP	5
 
 void adis16240_remove_trigger(struct iio_dev *indio_dev);
 int adis16240_probe_trigger(struct iio_dev *indio_dev);
@@ -175,8 +171,6 @@ ssize_t adis16240_read_data_from_ring(struct device *dev,
 int adis16240_configure_ring(struct iio_dev *indio_dev);
 void adis16240_unconfigure_ring(struct iio_dev *indio_dev);
 
-int adis16240_initialize_ring(struct iio_ring_buffer *ring);
-void adis16240_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
 static inline void adis16240_remove_trigger(struct iio_dev *indio_dev)
@@ -205,14 +199,5 @@ static inline void adis16240_unconfigure_ring(struct iio_dev *indio_dev)
 {
 }
 
-static inline int adis16240_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-}
-
-static inline void adis16240_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_ADIS16240_H_ */
diff --git a/drivers/staging/iio/accel/adis16240_core.c b/drivers/staging/iio/accel/adis16240_core.c
index 54fd6d77412..3e9531dd000 100644
--- a/drivers/staging/iio/accel/adis16240_core.c
+++ b/drivers/staging/iio/accel/adis16240_core.c
@@ -14,12 +14,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "accel.h"
 #include "../adc/adc.h"
 
@@ -74,13 +75,13 @@ static int adis16240_spi_write_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -120,13 +121,13 @@ static int adis16240_spi_read_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -502,7 +503,7 @@ static int __devinit adis16240_probe(struct spi_device *spi)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = adis16240_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
@@ -534,7 +535,7 @@ error_unregister_line:
 	if (spi->irq)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16240_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16240_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -563,7 +564,7 @@ static int adis16240_remove(struct spi_device *spi)
 	if (spi->irq)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16240_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	iio_device_unregister(indio_dev);
 	adis16240_unconfigure_ring(indio_dev);
 	kfree(st->tx);
diff --git a/drivers/staging/iio/accel/adis16240_ring.c b/drivers/staging/iio/accel/adis16240_ring.c
index 26b677bd84c..cd69a2e2bb9 100644
--- a/drivers/staging/iio/accel/adis16240_ring.c
+++ b/drivers/staging/iio/accel/adis16240_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,16 +17,6 @@
 #include "../trigger.h"
 #include "adis16240.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
 static IIO_SCAN_EL_C(supply, ADIS16240_SCAN_SUPPLY, IIO_UNSIGNED(10),
 		ADIS16240_SUPPLY_OUT, NULL);
 static IIO_SCAN_EL_C(accel_x, ADIS16240_SCAN_ACC_X, IIO_SIGNED(10),
@@ -61,10 +52,10 @@ static struct attribute_group adis16240_scan_el_group = {
  * adis16240_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16240_poll_func_th(struct iio_dev *indio_dev)
+static void adis16240_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16240_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 }
 
@@ -130,10 +121,9 @@ static void adis16240_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16240_read_ring_data(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-						st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i] = be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -149,48 +139,6 @@ static void adis16240_trigger_bh_to_ring(struct work_struct *work_s)
 	return;
 }
 
-static int adis16240_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count)
-				/* Timestamp (aligned sizeof(s64) and data */
-				size = (((indio_dev->scan_count * sizeof(s16))
-					 + sizeof(s64) - 1)
-					& ~(sizeof(s64) - 1))
-					+ sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16240_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-				indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16240_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-				indio_dev->pollfunc)
-		: 0;
-}
-
 void adis16240_unconfigure_ring(struct iio_dev *indio_dev)
 {
 	kfree(indio_dev->pollfunc);
@@ -223,18 +171,16 @@ int adis16240_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16240_data_rdy_ring_preenable;
-	ring->postenable = &adis16240_data_rdy_ring_postenable;
-	ring->predisable = &adis16240_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16240_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16240_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -243,12 +189,3 @@ error_iio_sw_rb_free:
 	return ret;
 }
 
-int adis16240_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16240_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/accel/adis16240_trigger.c b/drivers/staging/iio/accel/adis16240_trigger.c
index df1312e17f4..2ba71fd73a4 100644
--- a/drivers/staging/iio/accel/adis16240_trigger.c
+++ b/drivers/staging/iio/accel/adis16240_trigger.c
@@ -23,8 +23,7 @@ static int adis16240_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16240_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -83,14 +82,13 @@ int adis16240_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16240_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16240-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16240-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/accel/kxsd9.c b/drivers/staging/iio/accel/kxsd9.c
index ae7ffe114fc..79f57950ebe 100644
--- a/drivers/staging/iio/accel/kxsd9.c
+++ b/drivers/staging/iio/accel/kxsd9.c
@@ -16,17 +16,11 @@
  *		heavily optimized ring buffer access function.
  */
 
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/fs.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
-#include <linux/rtc.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/string.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h
index e76a97937a3..6e730553fca 100644
--- a/drivers/staging/iio/accel/lis3l02dq.h
+++ b/drivers/staging/iio/accel/lis3l02dq.h
@@ -148,30 +148,31 @@ Form of high byte dependant on justification set in ctrl reg */
 #define LIS3L02DQ_MAX_RX 12
 /**
  * struct lis3l02dq_state - device instance specific data
+ * @helper:		data and func pointer allowing generic functions
  * @us:			actual spi_device
- * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
+ * @work_thresh:	bh for threshold events
+ * @thresh_timestamp:	timestamp for threshold interrupts.
  * @inter:		used to check if new interrupt has been triggered
- * @last_timestamp:	passing timestamp from th to bh of interrupt handler
- * @indio_dev:		industrial I/O device structure
  * @trig:		data ready trigger registered with iio
  * @tx:			transmit buffer
  * @rx:			recieve buffer
  * @buf_lock:		mutex to protect tx and rx
  **/
 struct lis3l02dq_state {
+	struct iio_sw_ring_helper_state	help;
 	struct spi_device		*us;
-	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
+	struct work_struct		work_thresh;
+	s64				thresh_timestamp;
 	bool				inter;
-	s64				last_timestamp;
-	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
 	u8				*tx;
 	u8				*rx;
 	struct mutex			buf_lock;
 };
 
+#define lis3l02dq_h_to_s(_h)				\
+	container_of(_h, struct lis3l02dq_state, help)
+
 int lis3l02dq_spi_read_reg_8(struct device *dev,
 			     u8 reg_address,
 			     u8 *val);
@@ -195,15 +196,15 @@ ssize_t lis3l02dq_read_accel_from_ring(struct device *dev,
 int lis3l02dq_configure_ring(struct iio_dev *indio_dev);
 void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev);
 
-int lis3l02dq_initialize_ring(struct iio_ring_buffer *ring);
-void lis3l02dq_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
-static inline void lis3l02dq_remove_trigger(struct iio_dev *indio_dev) {};
+static inline void lis3l02dq_remove_trigger(struct iio_dev *indio_dev)
+{
+}
 static inline int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 {
 	return 0;
-};
+}
 
 static inline ssize_t
 lis3l02dq_read_accel_from_ring(struct device *dev,
@@ -211,18 +212,14 @@ lis3l02dq_read_accel_from_ring(struct device *dev,
 			       char *buf)
 {
 	return 0;
-};
+}
 
 static int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
 {
 	return 0;
-};
+}
 static inline void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev)
-{};
-static inline int lis3l02dq_initialize_ring(struct iio_ring_buffer *ring)
 {
-	return 0;
-};
-static inline void lis3l02dq_uninitialize_ring(struct iio_ring_buffer *ring) {};
+}
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_LIS3L02DQ_H_ */
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index 6b5577d7d8d..0ee93373754 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -27,6 +27,9 @@
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
+#include "../ring_sw.h"
+
 #include "accel.h"
 
 #include "lis3l02dq.h"
@@ -47,7 +50,9 @@ int lis3l02dq_spi_read_reg_8(struct device *dev, u8 reg_address, u8 *val)
 	int ret;
 	struct spi_message msg;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct lis3l02dq_state *st = iio_dev_get_devdata(indio_dev);
+	struct iio_sw_ring_helper_state *h = iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
+
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
 		.rx_buf = st->rx,
@@ -82,7 +87,9 @@ int lis3l02dq_spi_write_reg_8(struct device *dev,
 	int ret;
 	struct spi_message msg;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct lis3l02dq_state *st = iio_dev_get_devdata(indio_dev);
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 	struct spi_transfer xfer = {
 		.tx_buf = st->tx,
 		.bits_per_word = 8,
@@ -96,7 +103,7 @@ int lis3l02dq_spi_write_reg_8(struct device *dev,
 
 	spi_message_init(&msg);
 	spi_message_add_tail(&xfer, &msg);
-	ret =  spi_sync(st->us, &msg);
+	ret = spi_sync(st->us, &msg);
 	mutex_unlock(&st->buf_lock);
 
 	return ret;
@@ -116,7 +123,9 @@ static int lis3l02dq_spi_write_reg_s16(struct device *dev,
 	int ret;
 	struct spi_message msg;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct lis3l02dq_state *st = iio_dev_get_devdata(indio_dev);
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 	struct spi_transfer xfers[] = { {
 			.tx_buf = st->tx,
 			.bits_per_word = 8,
@@ -158,7 +167,9 @@ static int lis3l02dq_spi_read_reg_s16(struct device *dev,
 {
 	struct spi_message msg;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct lis3l02dq_state *st = iio_dev_get_devdata(indio_dev);
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 	int ret;
 	struct spi_transfer xfers[] = { {
 			.tx_buf = st->tx,
@@ -411,7 +422,7 @@ static int lis3l02dq_initial_setup(struct lis3l02dq_state *st)
 
 	val = LIS3L02DQ_DEFAULT_CTRL1;
 	/* Write suitable defaults to ctrl1 */
-	ret = lis3l02dq_spi_write_reg_8(&st->indio_dev->dev,
+	ret = lis3l02dq_spi_write_reg_8(&st->help.indio_dev->dev,
 					LIS3L02DQ_REG_CTRL_1_ADDR,
 					&val);
 	if (ret) {
@@ -419,7 +430,7 @@ static int lis3l02dq_initial_setup(struct lis3l02dq_state *st)
 		goto err_ret;
 	}
 	/* Repeat as sometimes doesn't work first time?*/
-	ret = lis3l02dq_spi_write_reg_8(&st->indio_dev->dev,
+	ret = lis3l02dq_spi_write_reg_8(&st->help.indio_dev->dev,
 					LIS3L02DQ_REG_CTRL_1_ADDR,
 					&val);
 	if (ret) {
@@ -429,17 +440,17 @@ static int lis3l02dq_initial_setup(struct lis3l02dq_state *st)
 
 	/* Read back to check this has worked acts as loose test of correct
 	 * chip */
-	ret = lis3l02dq_spi_read_reg_8(&st->indio_dev->dev,
+	ret = lis3l02dq_spi_read_reg_8(&st->help.indio_dev->dev,
 				       LIS3L02DQ_REG_CTRL_1_ADDR,
 				       &valtest);
 	if (ret || (valtest != val)) {
-		dev_err(&st->indio_dev->dev, "device not playing ball");
+		dev_err(&st->help.indio_dev->dev, "device not playing ball");
 		ret = -EINVAL;
 		goto err_ret;
 	}
 
 	val = LIS3L02DQ_DEFAULT_CTRL2;
-	ret = lis3l02dq_spi_write_reg_8(&st->indio_dev->dev,
+	ret = lis3l02dq_spi_write_reg_8(&st->help.indio_dev->dev,
 					LIS3L02DQ_REG_CTRL_2_ADDR,
 					&val);
 	if (ret) {
@@ -448,7 +459,7 @@ static int lis3l02dq_initial_setup(struct lis3l02dq_state *st)
 	}
 
 	val = LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC;
-	ret = lis3l02dq_spi_write_reg_8(&st->indio_dev->dev,
+	ret = lis3l02dq_spi_write_reg_8(&st->help.indio_dev->dev,
 					LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
 					&val);
 	if (ret)
@@ -524,8 +535,7 @@ static ssize_t lis3l02dq_read_interrupt_config(struct device *dev,
 				       LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
 				       (u8 *)&val);
 
-	return ret ? ret : sprintf(buf, "%d\n",
-				   (val & this_attr->mask) ? 1 : 0);;
+	return ret ? ret : sprintf(buf, "%d\n", !!(val & this_attr->mask));
 }
 
 static ssize_t lis3l02dq_write_interrupt_config(struct device *dev,
@@ -595,16 +605,18 @@ error_mutex_unlock:
 }
 
 
-static int lis3l02dq_thresh_handler_th(struct iio_dev *dev_info,
+static int lis3l02dq_thresh_handler_th(struct iio_dev *indio_dev,
 				       int index,
 				       s64 timestamp,
 				       int no_test)
 {
-	struct lis3l02dq_state *st = dev_info->dev_data;
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 
 	/* Stash the timestamp somewhere convenient for the bh */
-	st->last_timestamp = timestamp;
-	schedule_work(&st->work_cont_thresh.ws);
+	st->thresh_timestamp = timestamp;
+	schedule_work(&st->work_thresh);
 
 	return 0;
 }
@@ -615,48 +627,49 @@ static int lis3l02dq_thresh_handler_th(struct iio_dev *dev_info,
  */
 static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
 {
-	struct iio_work_cont *wc
-		= container_of(work_s, struct iio_work_cont, ws);
-	struct lis3l02dq_state *st = wc->st;
+       struct lis3l02dq_state *st
+	       = container_of(work_s,
+		       struct lis3l02dq_state, work_thresh);
+
 	u8 t;
 
-	lis3l02dq_spi_read_reg_8(&st->indio_dev->dev,
+	lis3l02dq_spi_read_reg_8(&st->help.indio_dev->dev,
 				 LIS3L02DQ_REG_WAKE_UP_SRC_ADDR,
 				 &t);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_Z_HIGH,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_LOW)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_Z_LOW,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_HIGH)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_Y_HIGH,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Y_LOW)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_Y_LOW,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_HIGH)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_X_HIGH,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 
 	if (t & LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_X_LOW)
-		iio_push_event(st->indio_dev, 0,
+		iio_push_event(st->help.indio_dev, 0,
 			       IIO_EVENT_CODE_ACCEL_X_LOW,
-			       st->last_timestamp);
+			       st->thresh_timestamp);
 	/* reenable the irq */
 	enable_irq(st->us->irq);
 	/* Ack and allow for new interrupts */
-	lis3l02dq_spi_read_reg_8(&st->indio_dev->dev,
+	lis3l02dq_spi_read_reg_8(&st->help.indio_dev->dev,
 				 LIS3L02DQ_REG_WAKE_UP_ACK_ADDR,
 				 &t);
 
@@ -750,6 +763,7 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 		ret =  -ENOMEM;
 		goto error_ret;
 	}
+	INIT_WORK(&st->work_thresh, lis3l02dq_thresh_handler_bh_no_check);
 	/* this is only used tor removal purposes */
 	spi_set_drvdata(spi, st);
 
@@ -767,56 +781,46 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	st->us = spi;
 	mutex_init(&st->buf_lock);
 	/* setup the industrialio driver allocated elements */
-	st->indio_dev = iio_allocate_device();
-	if (st->indio_dev == NULL) {
+	st->help.indio_dev = iio_allocate_device();
+	if (st->help.indio_dev == NULL) {
 		ret = -ENOMEM;
 		goto error_free_tx;
 	}
 
-	st->indio_dev->dev.parent = &spi->dev;
-	st->indio_dev->num_interrupt_lines = 1;
-	st->indio_dev->event_attrs = &lis3l02dq_event_attribute_group;
-	st->indio_dev->attrs = &lis3l02dq_attribute_group;
-	st->indio_dev->dev_data = (void *)(st);
-	st->indio_dev->driver_module = THIS_MODULE;
-	st->indio_dev->modes = INDIO_DIRECT_MODE;
+	st->help.indio_dev->dev.parent = &spi->dev;
+	st->help.indio_dev->num_interrupt_lines = 1;
+	st->help.indio_dev->event_attrs = &lis3l02dq_event_attribute_group;
+	st->help.indio_dev->attrs = &lis3l02dq_attribute_group;
+	st->help.indio_dev->dev_data = (void *)(&st->help);
+	st->help.indio_dev->driver_module = THIS_MODULE;
+	st->help.indio_dev->modes = INDIO_DIRECT_MODE;
 
-	ret = lis3l02dq_configure_ring(st->indio_dev);
+	ret = lis3l02dq_configure_ring(st->help.indio_dev);
 	if (ret)
 		goto error_free_dev;
 
-	ret = iio_device_register(st->indio_dev);
+	ret = iio_device_register(st->help.indio_dev);
 	if (ret)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = lis3l02dq_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->help.indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
 	}
 
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
-		/* This is a little unusual, in that the device seems
-		   to need a full read of the interrupt source reg before
-		   the interrupt will reset.
-		   Hence the two handlers are the same */
-		iio_init_work_cont(&st->work_cont_thresh,
-				   lis3l02dq_thresh_handler_bh_no_check,
-				   lis3l02dq_thresh_handler_bh_no_check,
-				   LIS3L02DQ_REG_WAKE_UP_SRC_ADDR,
-				   0,
-				   st);
 		st->inter = 0;
 		ret = iio_register_interrupt_line(spi->irq,
-						  st->indio_dev,
+						  st->help.indio_dev,
 						  0,
 						  IRQF_TRIGGER_RISING,
 						  "lis3l02dq");
 		if (ret)
 			goto error_uninitialize_ring;
 
-		ret = lis3l02dq_probe_trigger(st->indio_dev);
+		ret = lis3l02dq_probe_trigger(st->help.indio_dev);
 		if (ret)
 			goto error_unregister_line;
 	}
@@ -828,20 +832,20 @@ static int __devinit lis3l02dq_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
-		lis3l02dq_remove_trigger(st->indio_dev);
+	if (st->help.indio_dev->modes & INDIO_RING_TRIGGERED)
+		lis3l02dq_remove_trigger(st->help.indio_dev);
 error_unregister_line:
-	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
-		iio_unregister_interrupt_line(st->indio_dev, 0);
+	if (st->help.indio_dev->modes & INDIO_RING_TRIGGERED)
+		iio_unregister_interrupt_line(st->help.indio_dev, 0);
 error_uninitialize_ring:
-	lis3l02dq_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->help.indio_dev->ring);
 error_unreg_ring_funcs:
-	lis3l02dq_unconfigure_ring(st->indio_dev);
+	lis3l02dq_unconfigure_ring(st->help.indio_dev);
 error_free_dev:
 	if (regdone)
-		iio_device_unregister(st->indio_dev);
+		iio_device_unregister(st->help.indio_dev);
 	else
-		iio_free_device(st->indio_dev);
+		iio_free_device(st->help.indio_dev);
 error_free_tx:
 	kfree(st->tx);
 error_free_rx:
@@ -856,7 +860,9 @@ error_ret:
 static int lis3l02dq_stop_device(struct iio_dev *indio_dev)
 {
 	int ret;
-	struct lis3l02dq_state *st = indio_dev->dev_data;
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 	u8 val = 0;
 
 	mutex_lock(&indio_dev->mlock);
@@ -883,7 +889,7 @@ static int lis3l02dq_remove(struct spi_device *spi)
 {
 	int ret;
 	struct lis3l02dq_state *st = spi_get_drvdata(spi);
-	struct iio_dev *indio_dev = st->indio_dev;
+	struct iio_dev *indio_dev = st->help.indio_dev;
 
 	ret = lis3l02dq_stop_device(indio_dev);
 	if (ret)
@@ -895,7 +901,7 @@ static int lis3l02dq_remove(struct spi_device *spi)
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	lis3l02dq_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	lis3l02dq_unconfigure_ring(indio_dev);
 	iio_device_unregister(indio_dev);
 	kfree(st->tx);
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index e4e202e6cb3..a960a8ff3c4 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -103,13 +103,15 @@ static struct attribute_group lis3l02dq_scan_el_group = {
  * lis3l02dq_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void lis3l02dq_poll_func_th(struct iio_dev *indio_dev)
+static void lis3l02dq_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
-  struct lis3l02dq_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
-	schedule_work(&st->work_trigger_to_ring);
-	/* Indicate that this interrupt is being handled */
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
+	/* in this case we need to slightly extend the helper function */
+	iio_sw_poll_func_th(indio_dev, time);
 
+	/* Indicate that this interrupt is being handled */
 	/* Technically this is trigger related, but without this
 	 * handler running there is currently now way for the interrupt
 	 * to clear.
@@ -120,16 +122,16 @@ static void lis3l02dq_poll_func_th(struct iio_dev *indio_dev)
 /**
  * lis3l02dq_data_rdy_trig_poll() the event handler for the data rdy trig
  **/
-static int lis3l02dq_data_rdy_trig_poll(struct iio_dev *dev_info,
+static int lis3l02dq_data_rdy_trig_poll(struct iio_dev *indio_dev,
 				       int index,
 				       s64 timestamp,
 				       int no_test)
 {
-	struct lis3l02dq_state *st = iio_dev_get_devdata(dev_info);
-	struct iio_trigger *trig = st->trig;
+	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(st->trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -213,7 +215,7 @@ static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
 	struct spi_message msg;
 	int ret, i, j = 0;
 
-	xfers = kzalloc((st->indio_dev->scan_count) * 2
+	xfers = kzalloc((st->help.indio_dev->scan_count) * 2
 			* sizeof(*xfers), GFP_KERNEL);
 	if (!xfers)
 		return -ENOMEM;
@@ -221,7 +223,7 @@ static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
 	mutex_lock(&st->buf_lock);
 
 	for (i = 0; i < ARRAY_SIZE(read_all_tx_array)/4; i++) {
-		if (st->indio_dev->scan_mask & (1 << i)) {
+		if (st->help.indio_dev->scan_mask & (1 << i)) {
 			/* lower byte */
 			xfers[j].tx_buf = st->tx + 2*j;
 			st->tx[2*j] = read_all_tx_array[i*4];
@@ -249,7 +251,7 @@ static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
 	 * values in alternate bytes
 	 */
 	spi_message_init(&msg);
-	for (j = 0; j < st->indio_dev->scan_count * 2; j++)
+	for (j = 0; j < st->help.indio_dev->scan_count * 2; j++)
 		spi_message_add_tail(&xfers[j], &msg);
 
 	ret = spi_sync(st->us, &msg);
@@ -259,102 +261,37 @@ static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
 	return ret;
 }
 
-
-/* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
- * specific to be rolled into the core.
- */
 static void lis3l02dq_trigger_bh_to_ring(struct work_struct *work_s)
 {
-	struct lis3l02dq_state *st
-		= container_of(work_s, struct lis3l02dq_state,
-			       work_trigger_to_ring);
-
-	u8 *rx_array;
-	int i = 0;
-	u16 *data;
-	size_t datasize = st->indio_dev
-		->ring->access.get_bpd(st->indio_dev->ring);
-
-	data = kmalloc(datasize , GFP_KERNEL);
-	if (data == NULL) {
-		dev_err(&st->us->dev, "memory alloc failed in ring bh");
-		return;
-	}
-	/* Due to interleaved nature of transmission this buffer must be
-	 * twice the number of bytes, or 4 times the number of channels
-	 */
-	rx_array = kmalloc(4 * (st->indio_dev->scan_count), GFP_KERNEL);
-	if (rx_array == NULL) {
-		dev_err(&st->us->dev, "memory alloc failed in ring bh");
-		kfree(data);
-		return;
-	}
+	struct iio_sw_ring_helper_state *h
+		= container_of(work_s, struct iio_sw_ring_helper_state,
+			work_trigger_to_ring);
+	struct lis3l02dq_state *st = lis3l02dq_h_to_s(h);
 
-	/* whilst trigger specific, if this read does nto occur the data
-	   ready interrupt will not be cleared.  Need to add a mechanism
-	   to provide a dummy read function if this is not triggering on
-	   the data ready function but something else is.
-	*/
 	st->inter = 0;
-
-	if (st->indio_dev->scan_count)
-		if (lis3l02dq_read_all(st, rx_array) >= 0)
-			for (; i < st->indio_dev->scan_count; i++)
-				data[i] = combine_8_to_16(rx_array[i*4+1],
-							  rx_array[i*4+3]);
-	/* Guaranteed to be aligned with 8 byte boundary */
-	if (st->indio_dev->scan_timestamp)
-		*((s64 *)(data + ((i + 3)/4)*4)) = st->last_timestamp;
-
-	st->indio_dev->ring->access.store_to(st->indio_dev->ring,
-					    (u8 *)data,
-					    st->last_timestamp);
-
-	iio_trigger_notify_done(st->indio_dev->trig);
-	kfree(rx_array);
-	kfree(data);
-
-	return;
-}
-/* in these circumstances is it better to go with unaligned packing and
- * deal with the cost?*/
-static int lis3l02dq_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count) /* Timestamp and data */
-				size = 2*sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
+	iio_sw_trigger_bh_to_ring(work_s);
 }
 
-static int lis3l02dq_data_rdy_ring_postenable(struct iio_dev *indio_dev)
+static int lis3l02dq_get_ring_element(struct iio_sw_ring_helper_state *h,
+				u8 *buf)
 {
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-					       indio_dev->pollfunc)
-		: 0;
-}
+	int ret, i;
+	u8 *rx_array ;
+	s16 *data = (s16 *)buf;
 
-static int lis3l02dq_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-						indio_dev->pollfunc)
-		: 0;
-}
+	rx_array = kzalloc(4 * (h->indio_dev->scan_count), GFP_KERNEL);
+	if (rx_array == NULL)
+		return -ENOMEM;
+	ret = lis3l02dq_read_all(lis3l02dq_h_to_s(h), rx_array);
+	if (ret < 0)
+		return ret;
+	for (i = 0; i < h->indio_dev->scan_count; i++)
+		data[i] = combine_8_to_16(rx_array[i*4+1],
+					rx_array[i*4+3]);
+	kfree(rx_array);
 
+	return i*sizeof(data[0]);
+}
 
 /* Caller responsible for locking as necessary. */
 static int
@@ -427,7 +364,7 @@ static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig,
 	struct lis3l02dq_state *st = trig->private_data;
 	int ret = 0;
 	u8 t;
-	__lis3l02dq_write_data_ready_config(&st->indio_dev->dev,
+	__lis3l02dq_write_data_ready_config(&st->help.indio_dev->dev,
 					    &iio_event_data_rdy_trig,
 					    state);
 	if (state == false) {
@@ -437,7 +374,7 @@ static int lis3l02dq_data_rdy_trigger_set_state(struct iio_trigger *trig,
 		/* Clear any outstanding ready events */
 		ret = lis3l02dq_read_all(st, NULL);
 	}
-	lis3l02dq_spi_read_reg_8(&st->indio_dev->dev,
+	lis3l02dq_spi_read_reg_8(&st->help.indio_dev->dev,
 				 LIS3L02DQ_REG_WAKE_UP_SRC_ADDR,
 				 &t);
 	return ret;
@@ -495,14 +432,14 @@ int lis3l02dq_probe_trigger(struct iio_dev *indio_dev)
 	if (!state->trig)
 		return -ENOMEM;
 
-	state->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	state->trig->name = kasprintf(GFP_KERNEL,
+				      "lis3l02dq-dev%d",
+				      indio_dev->id);
 	if (!state->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)state->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "lis3l02dq-dev%d", indio_dev->id);
+
 	state->trig->dev.parent = &state->us->dev;
 	state->trig->owner = THIS_MODULE;
 	state->trig->private_data = state;
@@ -540,12 +477,12 @@ void lis3l02dq_unconfigure_ring(struct iio_dev *indio_dev)
 
 int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
 {
-	int ret = 0;
-	struct lis3l02dq_state *st = indio_dev->dev_data;
-	struct iio_ring_buffer *ring;
-	INIT_WORK(&st->work_trigger_to_ring, lis3l02dq_trigger_bh_to_ring);
-	/* Set default scan mode */
+	int ret;
+	struct iio_sw_ring_helper_state *h = iio_dev_get_devdata(indio_dev);
 
+	INIT_WORK(&h->work_trigger_to_ring, lis3l02dq_trigger_bh_to_ring);
+	/* Set default scan mode */
+	h->get_ring_element = &lis3l02dq_get_ring_element;
 	iio_scan_mask_set(indio_dev, iio_scan_el_accel_x.number);
 	iio_scan_mask_set(indio_dev, iio_scan_el_accel_y.number);
 	iio_scan_mask_set(indio_dev, iio_scan_el_accel_z.number);
@@ -553,26 +490,21 @@ int lis3l02dq_configure_ring(struct iio_dev *indio_dev)
 
 	indio_dev->scan_el_attrs = &lis3l02dq_scan_el_group;
 
-	ring = iio_sw_rb_allocate(indio_dev);
-	if (!ring) {
-		ret = -ENOMEM;
-		return ret;
-	}
-	indio_dev->ring = ring;
+	indio_dev->ring = iio_sw_rb_allocate(indio_dev);
+	if (!indio_dev->ring)
+		return -ENOMEM;
+
 	/* Effectively select the ring buffer implementation */
-	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &lis3l02dq_data_rdy_ring_preenable;
-	ring->postenable = &lis3l02dq_data_rdy_ring_postenable;
-	ring->predisable = &lis3l02dq_data_rdy_ring_predisable;
-	ring->owner = THIS_MODULE;
-
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
+	iio_ring_sw_register_funcs(&indio_dev->ring->access);
+	indio_dev->ring->bpe = 2;
+	indio_dev->ring->preenable = &iio_sw_ring_preenable;
+	indio_dev->ring->postenable = &iio_triggered_ring_postenable;
+	indio_dev->ring->predisable = &iio_triggered_ring_predisable;
+	indio_dev->ring->owner = THIS_MODULE;
+
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &lis3l02dq_poll_func_th);
+	if (ret)
 		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &lis3l02dq_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -580,23 +512,3 @@ error_iio_sw_rb_free:
 	iio_sw_rb_free(indio_dev->ring);
 	return ret;
 }
-
-int lis3l02dq_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void lis3l02dq_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
-
-int lis3l02dq_set_ring_length(struct iio_dev *indio_dev, int length)
-{
-	/* Set sensible defaults for the ring buffer */
-	if (indio_dev->ring->access.set_length)
-		return indio_dev->ring->access.set_length(indio_dev->ring, 500);
-	return 0;
-}
-
-
diff --git a/drivers/staging/iio/accel/sca3000.h b/drivers/staging/iio/accel/sca3000.h
index e5321999b26..09d9470bb9a 100644
--- a/drivers/staging/iio/accel/sca3000.h
+++ b/drivers/staging/iio/accel/sca3000.h
@@ -242,7 +242,7 @@ static inline int sca3000_11bit_convert(uint8_t msb, uint8_t lsb)
 	val |= (val & (1 << 12)) ? 0xE000 : 0;
 
 	return val;
-};
+}
 
 static inline int sca3000_13bit_convert(uint8_t msb, uint8_t lsb)
 {
@@ -253,7 +253,7 @@ static inline int sca3000_13bit_convert(uint8_t msb, uint8_t lsb)
 	val |= (val & (1 << 12)) ? 0xE000 : 0;
 
 	return val;
-};
+}
 
 
 #ifdef CONFIG_IIO_RING_BUFFER
@@ -286,15 +286,19 @@ void sca3000_unconfigure_ring(struct iio_dev *indio_dev);
 void sca3000_ring_int_process(u8 val, struct iio_ring_buffer *ring);
 
 #else
-static inline void sca3000_register_ring_funcs(struct iio_dev *indio_dev) {};
+static inline void sca3000_register_ring_funcs(struct iio_dev *indio_dev)
+{
+}
 
 static inline
 int sca3000_register_ring_access_and_init(struct iio_dev *indio_dev)
 {
 	return 0;
-};
+}
 
-static inline void sca3000_ring_int_process(u8 val, void *ring) {};
+static inline void sca3000_ring_int_process(u8 val, void *ring)
+{
+}
 
 #endif
 
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index d4f82c39f33..b78b6b66ffe 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -387,7 +387,7 @@ sca3000_show_available_measurement_modes(struct device *dev,
 	case SCA3000_OP_MODE_BYPASS:
 		len += sprintf(buf + len, ", 1 - bypass mode");
 		break;
-	};
+	}
 	switch (st->info->option_mode_2) {
 	case SCA3000_OP_MODE_WIDE:
 		len += sprintf(buf + len, ", 2 - wide mode");
@@ -433,7 +433,7 @@ sca3000_show_measurement_mode(struct device *dev,
 		case SCA3000_OP_MODE_BYPASS:
 			len += sprintf(buf + len, "1 - bypass mode\n");
 			break;
-		};
+		}
 		break;
 	case SCA3000_MEAS_MODE_OP_2:
 		switch (st->info->option_mode_2) {
@@ -442,7 +442,7 @@ sca3000_show_measurement_mode(struct device *dev,
 			break;
 		}
 		break;
-	};
+	}
 
 error_ret:
 	mutex_unlock(&st->lock);
@@ -559,7 +559,7 @@ static ssize_t sca3000_read_av_freq(struct device *dev,
 			       st->info->option_mode_2_freq/2,
 			       st->info->option_mode_2_freq/4);
 		break;
-	};
+	}
 	kfree(rx);
 	return len;
 error_ret:
@@ -590,7 +590,7 @@ static inline int __sca3000_get_base_freq(struct sca3000_state *st,
 	case SCA3000_MEAS_MODE_OP_2:
 		*base_freq = info->option_mode_2_freq;
 		break;
-	};
+	}
 	kfree(rx);
 error_ret:
 	return ret;
@@ -627,8 +627,8 @@ static ssize_t sca3000_read_frequency(struct device *dev,
 		case 0x02:
 			len = sprintf(buf, "%d\n", base_freq/4);
 			break;
-	};
-			kfree(rx);
+	}
+	kfree(rx);
 	return len;
 error_ret_mut:
 	mutex_unlock(&st->lock);
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index 18c9376ecbb..688510fd8bb 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -1,4 +1,4 @@
-
+#
 # Makefile for industrial I/O ADC drivers
 #
 
diff --git a/drivers/staging/iio/adc/adc.h b/drivers/staging/iio/adc/adc.h
index 04eb16fd0a9..7841e6ad434 100644
--- a/drivers/staging/iio/adc/adc.h
+++ b/drivers/staging/iio/adc/adc.h
@@ -26,3 +26,6 @@
 			      _show,					\
 			      NULL,					\
 			      _addr)
+
+#define IIO_EVENT_CODE_IN_HIGH_THRESH(a) (IIO_EVENT_CODE_ADC_BASE  + a)
+#define IIO_EVENT_CODE_IN_LOW_THRESH(a) (IIO_EVENT_CODE_ADC_BASE  + a + 32)
diff --git a/drivers/staging/iio/adc/max1363.h b/drivers/staging/iio/adc/max1363.h
index 72cf3670936..8f0fe1ced2c 100644
--- a/drivers/staging/iio/adc/max1363.h
+++ b/drivers/staging/iio/adc/max1363.h
@@ -32,14 +32,6 @@
 
 /* Specific to the max1363 */
 #define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4))
-#define MAX1363_MON_CONV_RATE_133ksps		0
-#define MAX1363_MON_CONV_RATE_66_5ksps		0x02
-#define MAX1363_MON_CONV_RATE_33_3ksps		0x04
-#define MAX1363_MON_CONV_RATE_16_6ksps		0x06
-#define MAX1363_MON_CONV_RATE_8_3ksps		0x08
-#define MAX1363_MON_CONV_RATE_4_2ksps		0x0A
-#define MAX1363_MON_CONV_RATE_2_0ksps		0x0C
-#define MAX1363_MON_CONV_RATE_1_0ksps		0x0E
 #define MAX1363_MON_INT_ENABLE			0x01
 
 /* defined for readability reasons */
@@ -67,9 +59,8 @@
 
 /**
  * struct max1363_mode - scan mode information
- * @name:	Name used to identify the scan mode.
  * @conf:	The corresponding value of the configuration register
- * @numvals:	The number of values returned by a single scan
+ * @modemask:	Bit mask corresponding to channels enabled in this mode
  */
 struct max1363_mode {
 	int8_t		conf;
@@ -122,15 +113,6 @@ struct max1363_mode {
 			.modemask = _mask				\
 }
 
-/* Not currently handled */
-#define MAX1363_MODE_MONITOR {					\
-		.name = "monitor",				\
-			.conf = MAX1363_CHANNEL_SEL(3)		\
-			| MAX1363_CONFIG_SCAN_MONITOR_MODE	\
-			| MAX1363_CONFIG_SE,			\
-			.numvals = 10,				\
-		}
-
 /* This may seem an overly long winded way to do this, but at least it makes
  * clear what all the various options actually do. Alternative suggestions
  * that don't require user to have intimate knowledge of the chip welcomed.
@@ -147,7 +129,7 @@ enum max1363_channels {
 	max1363_in1min0, max1363_in3min2,
 	max1363_in5min4, max1363_in7min6,
 	max1363_in9min8, max1363_in11min10,
-	};
+};
 
 /* This must be maintained along side the max1363_mode_table in max1363_core */
 enum max1363_modes {
@@ -179,7 +161,6 @@ enum max1363_modes {
  * @default_mode:	the scan mode in which the chip starts up
  */
 struct max1363_chip_info {
-	const char			*name;
 	u8				num_inputs;
 	u8				bits;
 	u16				int_vref_mv;
@@ -191,7 +172,6 @@ struct max1363_chip_info {
 	struct attribute_group		*scan_attrs;
 };
 
-
 /**
  * struct max1363_state - driver instance specific data
  * @indio_dev:		the industrial I/O device
@@ -204,12 +184,20 @@ struct max1363_chip_info {
  * @poll_work:		bottom half of polling interrupt handler
  * @protect_ring:	used to ensure only one polling bh running at a time
  * @reg:		supply regulator
+ * @monitor_on:		whether monitor mode is enabled
+ * @monitor_speed:	parameter corresponding to device monitor speed setting
+ * @mask_high:		bitmask for enabled high thresholds
+ * @mask_low:		bitmask for enabled low thresholds
+ * @thresh_high:	high threshold values
+ * @thresh_low:		low threshold values
+ * @last_timestamp:	timestamp of last event interrupt
+ * @thresh_work:	bh work structure for event handling
  */
 struct max1363_state {
 	struct iio_dev			*indio_dev;
 	struct i2c_client		*client;
-	char				setupbyte;
-	char				configbyte;
+	u8				setupbyte;
+	u8				configbyte;
 	const struct max1363_chip_info	*chip_info;
 	const struct max1363_mode	*current_mode;
 	u32				requestedmask;
@@ -217,6 +205,18 @@ struct max1363_state {
 	atomic_t			protect_ring;
 	struct iio_trigger		*trig;
 	struct regulator		*reg;
+
+	/* Using monitor modes and buffer at the same time is
+	   currently not supported */
+	bool				monitor_on;
+	unsigned int			monitor_speed:3;
+	u8				mask_high;
+	u8				mask_low;
+	/* 4x unipolar first then the fours bipolar ones */
+	s16				thresh_high[8];
+	s16				thresh_low[8];
+	s64				last_timestamp;
+	struct work_struct		thresh_work;
 };
 
 const struct max1363_mode
@@ -230,32 +230,21 @@ int max1363_single_channel_from_ring(long mask, struct max1363_state *st);
 int max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev);
 void max1363_ring_cleanup(struct iio_dev *indio_dev);
 
-int max1363_initialize_ring(struct iio_ring_buffer *ring);
-void max1363_uninitialize_ring(struct iio_ring_buffer *ring);
-
 #else /* CONFIG_MAX1363_RING_BUFFER */
 
-static inline void max1363_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-};
-
-static inline int max1363_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-};
-
 int max1363_single_channel_from_ring(long mask, struct max1363_state *st)
 {
 	return -EINVAL;
-};
-
+}
 
 static inline int
 max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 {
 	return 0;
-};
+}
 
-static inline void max1363_ring_cleanup(struct iio_dev *indio_dev) {};
+static inline void max1363_ring_cleanup(struct iio_dev *indio_dev)
+{
+}
 #endif /* CONFIG_MAX1363_RING_BUFFER */
 #endif /* _MAX1363_H_ */
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index 905f8560d31..6435e509dd5 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -18,21 +18,19 @@
   *
   * Not currently implemented.
   *
-  * - Monitor interrrupt generation.
   * - Control of internal reference.
   */
 
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 #include <linux/workqueue.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 #include <linux/i2c.h>
-#include <linux/rtc.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/err.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
@@ -48,7 +46,7 @@
 	IIO_SCAN_EL_C(in##number, number, IIO_UNSIGNED(16), 0, NULL);
 #define MAX1363_SCAN_EL_D(p, n, number)					\
 	IIO_SCAN_NAMED_EL_C(in##p##m##in##n, in##p-in##n,		\
-			number, IIO_SIGNED(16), 0 , NULL);
+			number, IIO_SIGNED(16), 0, NULL);
 
 static MAX1363_SCAN_EL(0);
 static MAX1363_SCAN_EL(1);
@@ -148,7 +146,7 @@ const struct max1363_mode
 			      mask))
 				return &max1363_mode_table[ci->mode_list[i]];
 	return NULL;
-};
+}
 
 static ssize_t max1363_show_precision(struct device *dev,
 				struct device_attribute *attr,
@@ -167,7 +165,7 @@ static int max1363_write_basic_config(struct i2c_client *client,
 				      unsigned char d2)
 {
 	int ret;
-	u8 *tx_buf = kmalloc(2 , GFP_KERNEL);
+	u8 *tx_buf = kmalloc(2, GFP_KERNEL);
 
 	if (!tx_buf)
 		return -ENOMEM;
@@ -206,6 +204,16 @@ static ssize_t max1363_read_single_channel(struct device *dev,
 	long mask;
 
 	mutex_lock(&dev_info->mlock);
+	/*
+	 * If monitor mode is enabled, the method for reading a single
+	 * channel will have to be rather different and has not yet
+	 * been implemented.
+	 */
+	if (st->monitor_on) {
+		ret = -EBUSY;
+		goto error_ret;
+	}
+
 	/* If ring buffer capture is occuring, query the buffer */
 	if (iio_ring_enabled(dev_info)) {
 		mask = max1363_mode_table[this_attr->address].modemask;
@@ -305,7 +313,7 @@ static ssize_t max1363_show_name(struct device *dev,
 {
 	struct iio_dev *dev_info = dev_get_drvdata(dev);
 	struct max1363_state *st = iio_dev_get_devdata(dev_info);
-	return sprintf(buf, "%s\n", st->chip_info->name);
+	return sprintf(buf, "%s\n", st->client->name);
 }
 
 static IIO_DEVICE_ATTR(name, S_IRUGO, max1363_show_name, NULL, 0);
@@ -552,8 +560,7 @@ enum { max1361,
 
 /* max1363 and max1368 tested - rest from data sheet */
 static const struct max1363_chip_info max1363_chip_info_tbl[] = {
-	{
-		.name = "max1361",
+	[max1361] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -563,8 +570,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1362",
+	},
+	[max1362] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 4096,
@@ -574,8 +581,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1363",
+	},
+	[max1363] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -585,8 +592,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1364",
+	},
+	[max1364] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 4096,
@@ -596,8 +603,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1036",
+	},
+	[max1036] = {
 		.num_inputs = 4,
 		.bits = 8,
 		.int_vref_mv = 4096,
@@ -606,8 +613,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1037",
+	},
+	[max1037] = {
 		.num_inputs = 4,
 		.bits = 8,
 		.int_vref_mv = 2048,
@@ -616,8 +623,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1038",
+	},
+	[max1038] = {
 		.num_inputs = 12,
 		.bits = 8,
 		.int_vref_mv = 4096,
@@ -626,8 +633,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max1039",
+	},
+	[max1039] = {
 		.num_inputs = 12,
 		.bits = 8,
 		.int_vref_mv = 2048,
@@ -636,8 +643,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max1136",
+	},
+	[max1136] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 4096,
@@ -646,8 +653,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1137",
+	},
+	[max1137] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -656,8 +663,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1138",
+	},
+	[max1138] = {
 		.num_inputs = 12,
 		.bits = 10,
 		.int_vref_mv = 4096,
@@ -666,8 +673,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max1139",
+	},
+	[max1139] = {
 		.num_inputs = 12,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -676,8 +683,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max1236",
+	},
+	[max1236] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 4096,
@@ -686,8 +693,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1237",
+	},
+	[max1237] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -696,8 +703,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max1238",
+	},
+	[max1238] = {
 		.num_inputs = 12,
 		.bits = 12,
 		.int_vref_mv = 4096,
@@ -706,8 +713,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max1239",
+	},
+	[max1239] = {
 		.num_inputs = 12,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -716,8 +723,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11600",
+	},
+	[max11600] = {
 		.num_inputs = 4,
 		.bits = 8,
 		.int_vref_mv = 4096,
@@ -726,8 +733,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11601",
+	},
+	[max11601] = {
 		.num_inputs = 4,
 		.bits = 8,
 		.int_vref_mv = 2048,
@@ -736,8 +743,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11602",
+	},
+	[max11602] = {
 		.num_inputs = 8,
 		.bits = 8,
 		.int_vref_mv = 4096,
@@ -746,8 +753,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11603",
+	},
+	[max11603] = {
 		.num_inputs = 8,
 		.bits = 8,
 		.int_vref_mv = 2048,
@@ -756,8 +763,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11604",
+	},
+	[max11604] = {
 		.num_inputs = 12,
 		.bits = 8,
 		.int_vref_mv = 4098,
@@ -766,8 +773,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11605",
+	},
+	[max11605] = {
 		.num_inputs = 12,
 		.bits = 8,
 		.int_vref_mv = 2048,
@@ -776,8 +783,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11606",
+	},
+	[max11606] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 4096,
@@ -786,8 +793,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11607",
+	},
+	[max11607] = {
 		.num_inputs = 4,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -796,8 +803,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11608",
+	},
+	[max11608] = {
 		.num_inputs = 8,
 		.bits = 10,
 		.int_vref_mv = 4096,
@@ -806,8 +813,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11609",
+	},
+	[max11609] = {
 		.num_inputs = 8,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -816,8 +823,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11610",
+	},
+	[max11610] = {
 		.num_inputs = 12,
 		.bits = 10,
 		.int_vref_mv = 4098,
@@ -826,8 +833,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11611",
+	},
+	[max11611] = {
 		.num_inputs = 12,
 		.bits = 10,
 		.int_vref_mv = 2048,
@@ -836,8 +843,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11612",
+	},
+	[max11612] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 4096,
@@ -846,8 +853,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11613",
+	},
+	[max11613] = {
 		.num_inputs = 4,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -856,8 +863,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to3,
 		.dev_attrs = &max1363_dev_attr_group,
 		.scan_attrs = &max1363_scan_el_group,
-	}, {
-		.name = "max11614",
+	},
+	[max11614] = {
 		.num_inputs = 8,
 		.bits = 12,
 		.int_vref_mv = 4096,
@@ -866,8 +873,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11615",
+	},
+	[max11615] = {
 		.num_inputs = 8,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -876,8 +883,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to7,
 		.dev_attrs = &max11608_dev_attr_group,
 		.scan_attrs = &max11608_scan_el_group,
-	}, {
-		.name = "max11616",
+	},
+	[max11616] = {
 		.num_inputs = 12,
 		.bits = 12,
 		.int_vref_mv = 4098,
@@ -886,8 +893,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 		.default_mode = s0to11,
 		.dev_attrs = &max1238_dev_attr_group,
 		.scan_attrs = &max1238_scan_el_group,
-	}, {
-		.name = "max11617",
+	},
+	[max11617] = {
 		.num_inputs = 12,
 		.bits = 12,
 		.int_vref_mv = 2048,
@@ -899,6 +906,668 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
 	}
 };
 
+static const int max1363_monitor_speeds[] = { 133000, 665000, 33300, 16600,
+					      8300, 4200, 2000, 1000 };
+
+static ssize_t max1363_monitor_show_freq(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	return sprintf(buf, "%d\n", max1363_monitor_speeds[st->monitor_speed]);
+}
+
+static ssize_t max1363_monitor_store_freq(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	int i, ret;
+	unsigned long val;
+	bool found = false;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+	for (i = 0; i < ARRAY_SIZE(max1363_monitor_speeds); i++)
+		if (val == max1363_monitor_speeds[i]) {
+			found = true;
+			break;
+		}
+	if (!found)
+		return -EINVAL;
+
+	mutex_lock(&dev_info->mlock);
+	st->monitor_speed = i;
+	mutex_unlock(&dev_info->mlock);
+
+	return 0;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR,
+			max1363_monitor_show_freq,
+			max1363_monitor_store_freq);
+
+static IIO_CONST_ATTR(sampling_frequency_available,
+		"133000 665000 33300 16600 8300 4200 2000 1000");
+
+static ssize_t max1363_show_thresh(struct device *dev,
+				struct device_attribute *attr,
+				char *buf,
+				bool high)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	if (high)
+		return sprintf(buf, "%d\n",
+			st->thresh_high[this_attr->address]);
+	else
+		return sprintf(buf, "%d\n",
+			st->thresh_low[this_attr->address & 0x7]);
+}
+
+static ssize_t max1363_show_thresh_low(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	return max1363_show_thresh(dev, attr, buf, false);
+}
+
+static ssize_t max1363_show_thresh_high(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return max1363_show_thresh(dev, attr, buf, true);
+}
+
+static ssize_t max1363_store_thresh_unsigned(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len,
+					bool high)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+	switch (st->chip_info->bits) {
+	case 10:
+		if (val > 0x3FF)
+			return -EINVAL;
+		break;
+	case 12:
+		if (val > 0xFFF)
+			return -EINVAL;
+		break;
+	}
+
+	switch (high) {
+	case 1:
+		st->thresh_high[this_attr->address] = val;
+		break;
+	case 0:
+		st->thresh_low[this_attr->address & 0x7] = val;
+		break;
+	}
+
+	return len;
+}
+
+static ssize_t max1363_store_thresh_high_unsigned(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t len)
+{
+	return max1363_store_thresh_unsigned(dev, attr, buf, len, true);
+}
+
+static ssize_t max1363_store_thresh_low_unsigned(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t len)
+{
+	return max1363_store_thresh_unsigned(dev, attr, buf, len, false);
+}
+
+static ssize_t max1363_store_thresh_signed(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len,
+					bool high)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	long val;
+	int ret;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+	switch (st->chip_info->bits) {
+	case 10:
+		if (val < -512 || val > 511)
+			return -EINVAL;
+		break;
+	case 12:
+		if (val < -2048 || val > 2047)
+			return -EINVAL;
+		break;
+	}
+
+	switch (high) {
+	case 1:
+		st->thresh_high[this_attr->address] = val;
+		break;
+	case 0:
+		st->thresh_low[this_attr->address & 0x7] = val;
+		break;
+	}
+
+	return len;
+}
+
+static ssize_t max1363_store_thresh_high_signed(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t len)
+{
+	return max1363_store_thresh_signed(dev, attr, buf, len, true);
+}
+
+static ssize_t max1363_store_thresh_low_signed(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t len)
+{
+	return max1363_store_thresh_signed(dev, attr, buf, len, false);
+}
+
+static IIO_DEVICE_ATTR(in0_thresh_high_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_high,
+		max1363_store_thresh_high_unsigned, 0);
+static IIO_DEVICE_ATTR(in0_thresh_low_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_low,
+		max1363_store_thresh_low_unsigned, 0);
+static IIO_DEVICE_ATTR(in1_thresh_high_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_high,
+		max1363_store_thresh_high_unsigned, 1);
+static IIO_DEVICE_ATTR(in1_thresh_low_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_low,
+		max1363_store_thresh_low_unsigned, 1);
+static IIO_DEVICE_ATTR(in2_thresh_high_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_high,
+		max1363_store_thresh_high_unsigned, 2);
+static IIO_DEVICE_ATTR(in2_thresh_low_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_low,
+		max1363_store_thresh_low_unsigned, 2);
+static IIO_DEVICE_ATTR(in3_thresh_high_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_high,
+		max1363_store_thresh_high_unsigned, 3);
+static IIO_DEVICE_ATTR(in3_thresh_low_value, S_IRUGO | S_IWUSR,
+		max1363_show_thresh_low,
+		max1363_store_thresh_low_unsigned, 3);
+
+static IIO_DEVICE_ATTR_NAMED(in0min1_thresh_high_value,
+			in0-in1_thresh_high_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_high,
+			max1363_store_thresh_high_signed, 4);
+static IIO_DEVICE_ATTR_NAMED(in0min1_thresh_low_value,
+			in0-in1_thresh_low_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_low,
+			max1363_store_thresh_low_signed, 4);
+static IIO_DEVICE_ATTR_NAMED(in2min3_thresh_high_value,
+			in2-in3_thresh_high_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_high,
+			max1363_store_thresh_high_signed, 5);
+static IIO_DEVICE_ATTR_NAMED(in2min3_thresh_low_value,
+			in2-in3_thresh_low_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_low,
+			max1363_store_thresh_low_signed, 5);
+static IIO_DEVICE_ATTR_NAMED(in1min0_thresh_high_value,
+			in1-in0_thresh_high_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_high,
+			max1363_store_thresh_high_signed, 6);
+static IIO_DEVICE_ATTR_NAMED(in1min0_thresh_low_value,
+			in1-in0_thresh_low_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_low,
+			max1363_store_thresh_low_signed, 6);
+static IIO_DEVICE_ATTR_NAMED(in3min2_thresh_high_value,
+			in3-in2_thresh_high_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_high,
+			max1363_store_thresh_high_signed, 7);
+static IIO_DEVICE_ATTR_NAMED(in3min2_thresh_low_value,
+			in3-in2_thresh_low_value,
+			S_IRUGO | S_IWUSR, max1363_show_thresh_low,
+			max1363_store_thresh_low_signed, 7);
+
+static int max1363_int_th(struct iio_dev *dev_info,
+			int index,
+			s64 timestamp,
+			int not_test)
+{
+	struct max1363_state *st = dev_info->dev_data;
+
+	st->last_timestamp = timestamp;
+	schedule_work(&st->thresh_work);
+	return 0;
+}
+
+static void max1363_thresh_handler_bh(struct work_struct *work_s)
+{
+	struct max1363_state *st = container_of(work_s, struct max1363_state,
+						thresh_work);
+	u8 rx;
+	u8 tx[2] = { st->setupbyte,
+		     MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0 };
+
+	i2c_master_recv(st->client, &rx, 1);
+	if (rx & (1 << 0))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_LOW_THRESH(3),
+			st->last_timestamp);
+	if (rx & (1 << 1))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_HIGH_THRESH(3),
+			st->last_timestamp);
+	if (rx & (1 << 2))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_LOW_THRESH(2),
+			st->last_timestamp);
+	if (rx & (1 << 3))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_HIGH_THRESH(2),
+			st->last_timestamp);
+	if (rx & (1 << 4))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_LOW_THRESH(1),
+			st->last_timestamp);
+	if (rx & (1 << 5))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_HIGH_THRESH(1),
+			st->last_timestamp);
+	if (rx & (1 << 6))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_LOW_THRESH(0),
+			st->last_timestamp);
+	if (rx & (1 << 7))
+		iio_push_event(st->indio_dev, 0,
+			IIO_EVENT_CODE_IN_HIGH_THRESH(0),
+			st->last_timestamp);
+	enable_irq(st->client->irq);
+	i2c_master_send(st->client, tx, 2);
+}
+
+static ssize_t max1363_read_interrupt_config(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
+	int val;
+
+	mutex_lock(&dev_info->mlock);
+	if (this_attr->mask & 0x8)
+		val = (1 << (this_attr->mask & 0x7)) & st->mask_low;
+	else
+		val = (1 << this_attr->mask) & st->mask_high;
+	mutex_unlock(&dev_info->mlock);
+
+	return sprintf(buf, "%d\n", !!val);
+}
+
+static int max1363_monitor_mode_update(struct max1363_state *st, int enabled)
+{
+	u8 *tx_buf;
+	int ret, i = 3, j;
+	unsigned long numelements;
+	int len;
+	long modemask;
+
+	if (!enabled) {
+		/* transition to ring capture is not currently supported */
+		st->setupbyte &= ~MAX1363_SETUP_MONITOR_SETUP;
+		st->configbyte &= ~MAX1363_SCAN_MASK;
+		st->monitor_on = false;
+		return max1363_write_basic_config(st->client,
+						st->setupbyte,
+						st->configbyte);
+	}
+
+	/* Ensure we are in the relevant mode */
+	st->setupbyte |= MAX1363_SETUP_MONITOR_SETUP;
+	st->configbyte &= ~(MAX1363_CHANNEL_SEL_MASK
+			    | MAX1363_SCAN_MASK
+			| MAX1363_SE_DE_MASK);
+	st->configbyte |= MAX1363_CONFIG_SCAN_MONITOR_MODE;
+	if ((st->mask_low | st->mask_high) & 0x0F) {
+		st->configbyte |= max1363_mode_table[s0to3].conf;
+		modemask = max1363_mode_table[s0to3].modemask;
+	} else if ((st->mask_low | st->mask_high) & 0x30) {
+		st->configbyte |= max1363_mode_table[d0m1to2m3].conf;
+		modemask = max1363_mode_table[d0m1to2m3].modemask;
+	} else {
+		st->configbyte |= max1363_mode_table[d1m0to3m2].conf;
+		modemask = max1363_mode_table[d1m0to3m2].modemask;
+	}
+	numelements = hweight_long(modemask);
+	len = 3 * numelements + 3;
+	tx_buf = kmalloc(len, GFP_KERNEL);
+	if (!tx_buf) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	tx_buf[0] = st->configbyte;
+	tx_buf[1] = st->setupbyte;
+	tx_buf[2] = (st->monitor_speed << 1);
+
+	/*
+	 * So we need to do yet another bit of nefarious scan mode
+	 * setup to match what we need.
+	 */
+	for (j = 0; j < 8; j++)
+		if (modemask & (1 << j)) {
+			/* Establish the mode is in the scan */
+			if (st->mask_low & (1 << j)) {
+				tx_buf[i] = (st->thresh_low[j] >> 4) & 0xFF;
+				tx_buf[i + 1] = (st->thresh_low[j] << 4) & 0xF0;
+			} else if (j < 4) {
+				tx_buf[i] = 0;
+				tx_buf[i + 1] = 0;
+			} else {
+				tx_buf[i] = 0x80;
+				tx_buf[i + 1] = 0;
+			}
+			if (st->mask_high & (1 << j)) {
+				tx_buf[i + 1] |=
+					(st->thresh_high[j] >> 8) & 0x0F;
+				tx_buf[i + 2] = st->thresh_high[j] & 0xFF;
+			} else if (j < 4) {
+				tx_buf[i + 1] |= 0x0F;
+				tx_buf[i + 2] = 0xFF;
+			} else {
+				tx_buf[i + 1] |= 0x07;
+				tx_buf[i + 2] = 0xFF;
+			}
+			i += 3;
+		}
+
+
+	ret = i2c_master_send(st->client, tx_buf, len);
+	if (ret < 0)
+		goto error_ret;
+	if (ret != len) {
+		ret = -EIO;
+		goto error_ret;
+	}
+
+	/*
+	 * Now that we hopefully have sensible thresholds in place it is
+	 * time to turn the interrupts on.
+	 * It is unclear from the data sheet if this should be necessary
+	 * (i.e. whether monitor mode setup is atomic) but it appears to
+	 * be in practice.
+	 */
+	tx_buf[0] = st->setupbyte;
+	tx_buf[1] = MAX1363_MON_INT_ENABLE | (st->monitor_speed << 1) | 0xF0;
+	ret = i2c_master_send(st->client, tx_buf, 2);
+	if (ret < 0)
+		goto error_ret;
+	if (ret != 2) {
+		ret = -EIO;
+		goto error_ret;
+	}
+	ret = 0;
+	st->monitor_on = true;
+error_ret:
+
+	kfree(tx_buf);
+
+	return ret;
+}
+
+/*
+ * To keep this managable we always use one of 3 scan modes.
+ * Scan 0...3, 0-1,2-3 and 1-0,3-2
+ */
+static inline int __max1363_check_event_mask(int thismask, int checkmask)
+{
+	int ret = 0;
+	/* Is it unipolar */
+	if (thismask < 4) {
+		if (checkmask & ~0x0F) {
+			ret = -EBUSY;
+			goto error_ret;
+		}
+	} else if (thismask < 6) {
+		if (checkmask & ~0x30) {
+			ret = -EBUSY;
+			goto error_ret;
+		}
+	} else if (checkmask & ~0xC0)
+		ret = -EBUSY;
+error_ret:
+	return ret;
+}
+
+static ssize_t max1363_write_interrupt_config(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct max1363_state *st = iio_dev_get_devdata(dev_info);
+	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
+	unsigned long val;
+	int ret;
+	u16 unifiedmask;
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+	mutex_lock(&st->indio_dev->mlock);
+	unifiedmask = st->mask_low | st->mask_high;
+	if (this_attr->mask & 0x08) {
+		/* If we are disabling no need to test */
+		if (val == 0)
+			st->mask_low &= ~(1 << (this_attr->mask & 0x7));
+		else {
+			ret = __max1363_check_event_mask(this_attr->mask & 0x7,
+							unifiedmask);
+			if (ret)
+				goto error_ret;
+			st->mask_low |= (1 << (this_attr->mask & 0x7));
+		}
+	} else {
+		if (val == 0)
+			st->mask_high &= ~(1 << (this_attr->mask));
+		else {
+			ret = __max1363_check_event_mask(this_attr->mask,
+							unifiedmask);
+			if (ret)
+				goto error_ret;
+			st->mask_high |= (1 << this_attr->mask);
+		}
+	}
+	if (st->monitor_on && !st->mask_high && !st->mask_low)
+		iio_remove_event_from_list(this_attr->listel,
+					&dev_info->interrupts[0]->ev_list);
+	if (!st->monitor_on && val)
+		iio_add_event_to_list(this_attr->listel,
+				&dev_info->interrupts[0]->ev_list);
+
+	max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low));
+error_ret:
+	mutex_unlock(&st->indio_dev->mlock);
+
+	return len;
+}
+
+IIO_EVENT_SH(max1363_thresh, max1363_int_th);
+
+#define MAX1363_HIGH_THRESH(a) a
+#define MAX1363_LOW_THRESH(a) (a | 0x8)
+
+IIO_EVENT_ATTR_SH(in0_thresh_high_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_HIGH_THRESH(0));
+
+IIO_EVENT_ATTR_SH(in0_thresh_low_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_LOW_THRESH(0));
+
+IIO_EVENT_ATTR_SH(in1_thresh_high_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_HIGH_THRESH(1));
+
+IIO_EVENT_ATTR_SH(in1_thresh_low_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_LOW_THRESH(1));
+
+IIO_EVENT_ATTR_SH(in2_thresh_high_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_HIGH_THRESH(2));
+
+IIO_EVENT_ATTR_SH(in2_thresh_low_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_LOW_THRESH(2));
+
+IIO_EVENT_ATTR_SH(in3_thresh_high_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_HIGH_THRESH(3));
+
+IIO_EVENT_ATTR_SH(in3_thresh_low_en,
+		iio_event_max1363_thresh,
+		max1363_read_interrupt_config,
+		max1363_write_interrupt_config,
+		MAX1363_LOW_THRESH(3));
+
+IIO_EVENT_ATTR_NAMED_SH(in0min1_thresh_high_en,
+			in0-in1_thresh_high_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_HIGH_THRESH(4));
+
+IIO_EVENT_ATTR_NAMED_SH(in0min1_thresh_low_en,
+			in0-in1_thresh_low_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_LOW_THRESH(4));
+
+IIO_EVENT_ATTR_NAMED_SH(in3min2_thresh_high_en,
+			in3-in2_thresh_high_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_HIGH_THRESH(5));
+
+IIO_EVENT_ATTR_NAMED_SH(in3min2_thresh_low_en,
+			in3-in2_thresh_low_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_LOW_THRESH(5));
+
+IIO_EVENT_ATTR_NAMED_SH(in1min0_thresh_high_en,
+			in1-in0_thresh_high_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_HIGH_THRESH(6));
+
+IIO_EVENT_ATTR_NAMED_SH(in1min0_thresh_low_en,
+			in1-in0_thresh_low_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_LOW_THRESH(6));
+
+IIO_EVENT_ATTR_NAMED_SH(in2min3_thresh_high_en,
+			in2-in3_thresh_high_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_HIGH_THRESH(7));
+
+IIO_EVENT_ATTR_NAMED_SH(in2min3_thresh_low_en,
+			in2-in3_thresh_low_en,
+			iio_event_max1363_thresh,
+			max1363_read_interrupt_config,
+			max1363_write_interrupt_config,
+			MAX1363_LOW_THRESH(7));
+
+/*
+ * As with scan_elements, only certain sets of these can
+ * be combined.
+ */
+static struct attribute *max1363_event_attributes[] = {
+	&iio_dev_attr_in0_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in0_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in1_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in1_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in2_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in2_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in3_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in3_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in0min1_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in0min1_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in2min3_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in2min3_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in1min0_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in1min0_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_in3min2_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_in3min2_thresh_low_value.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_event_attr_in0_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in0_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in1_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in1_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in2_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in2_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in3_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in3_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in0min1_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in0min1_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in3min2_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in3min2_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in1min0_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in1min0_thresh_low_en.dev_attr.attr,
+	&iio_event_attr_in2min3_thresh_high_en.dev_attr.attr,
+	&iio_event_attr_in2min3_thresh_low_en.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute_group max1363_event_attribute_group = {
+	.attrs = max1363_event_attributes,
+};
+
 static int max1363_initial_setup(struct max1363_state *st)
 {
 	st->setupbyte = MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD
@@ -930,19 +1599,7 @@ static int __devinit max1363_probe(struct i2c_client *client,
 
 	atomic_set(&st->protect_ring, 0);
 
-	/* Find the chip model specific data */
-	for (i = 0; i < ARRAY_SIZE(max1363_chip_info_tbl); i++)
-		if (!strcmp(max1363_chip_info_tbl[i].name, id->name)) {
-			st->chip_info = &max1363_chip_info_tbl[i];
-			break;
-		};
-	/* Unsupported chip */
-	if (!st->chip_info) {
-		dev_err(&client->dev, "%s is not supported\n", id->name);
-		ret = -ENODEV;
-		goto error_free_st;
-	}
-
+	st->chip_info = &max1363_chip_info_tbl[id->driver_data];
 	st->reg = regulator_get(&client->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
@@ -978,6 +1635,11 @@ static int __devinit max1363_probe(struct i2c_client *client,
 	st->indio_dev->dev_data = (void *)(st);
 	st->indio_dev->driver_module = THIS_MODULE;
 	st->indio_dev->modes = INDIO_DIRECT_MODE;
+	if (st->chip_info->monitor_mode && client->irq) {
+		st->indio_dev->num_interrupt_lines = 1;
+		st->indio_dev->event_attrs
+			= &max1363_event_attribute_group;
+	}
 
 	ret = max1363_initial_setup(st);
 	if (ret)
@@ -991,10 +1653,25 @@ static int __devinit max1363_probe(struct i2c_client *client,
 	if (ret)
 		goto error_cleanup_ring;
 	regdone = 1;
-	ret = max1363_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret)
 		goto error_cleanup_ring;
+
+	if (st->chip_info->monitor_mode && client->irq) {
+		ret = iio_register_interrupt_line(client->irq,
+						st->indio_dev,
+						0,
+						IRQF_TRIGGER_RISING,
+						client->name);
+		if (ret)
+			goto error_uninit_ring;
+
+		INIT_WORK(&st->thresh_work, max1363_thresh_handler_bh);
+	}
+
 	return 0;
+error_uninit_ring:
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_cleanup_ring:
 	max1363_ring_cleanup(st->indio_dev);
 error_free_available_scan_masks:
@@ -1010,7 +1687,6 @@ error_disable_reg:
 error_put_reg:
 	if (!IS_ERR(st->reg))
 		regulator_put(st->reg);
-error_free_st:
 	kfree(st);
 
 error_ret:
@@ -1021,7 +1697,10 @@ static int max1363_remove(struct i2c_client *client)
 {
 	struct max1363_state *st = i2c_get_clientdata(client);
 	struct iio_dev *indio_dev = st->indio_dev;
-	max1363_uninitialize_ring(indio_dev->ring);
+
+	if (st->chip_info->monitor_mode && client->irq)
+		iio_unregister_interrupt_line(st->indio_dev, 0);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	max1363_ring_cleanup(indio_dev);
 	kfree(st->indio_dev->available_scan_masks);
 	iio_device_unregister(indio_dev);
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
index 56688dc9c92..786b17a0d6b 100644
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ b/drivers/staging/iio/adc/max1363_ring.c
@@ -68,7 +68,7 @@ error_ret:
 }
 
 /**
- * max1363_ring_preenable() setup the parameters of the ring before enabling
+ * max1363_ring_preenable() - setup the parameters of the ring before enabling
  *
  * The complex nature of the setting of the nuber of bytes per datum is due
  * to this driver currently ensuring that the timestamp is stored at an 8
@@ -105,44 +105,15 @@ static int max1363_ring_preenable(struct iio_dev *indio_dev)
 	return 0;
 }
 
-/**
- * max1363_ring_postenable() typical ring post enable
- *
- * Only not moved into the core for the hardware ring buffer cases
- * that are more sophisticated.
- **/
-static int max1363_ring_postenable(struct iio_dev *indio_dev)
-{
-	if (indio_dev->trig == NULL)
-		return 0;
-	return iio_trigger_attach_poll_func(indio_dev->trig,
-					    indio_dev->pollfunc);
-}
 
 /**
- * max1363_ring_predisable() runs just prior to ring buffer being disabled
- *
- * Typical predisable function which ensures that no trigger events can
- * occur before we disable the ring buffer (and hence would have no idea
- * what to do with them)
- **/
-static int max1363_ring_predisable(struct iio_dev *indio_dev)
-{
-	if (indio_dev->trig)
-		return iio_trigger_dettach_poll_func(indio_dev->trig,
-						     indio_dev->pollfunc);
-	else
-		return 0;
-}
-
-/**
- * max1363_poll_func_th() th of trigger launched polling to ring buffer
+ * max1363_poll_func_th() - th of trigger launched polling to ring buffer
  *
  * As sampling only occurs on i2c comms occuring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
-static void max1363_poll_func_th(struct iio_dev *indio_dev)
+static void max1363_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct max1363_state *st = indio_dev->dev_data;
 
@@ -151,7 +122,7 @@ static void max1363_poll_func_th(struct iio_dev *indio_dev)
 	return;
 }
 /**
- * max1363_poll_bh_to_ring() bh of trigger launched polling to ring buffer
+ * max1363_poll_bh_to_ring() - bh of trigger launched polling to ring buffer
  * @work_s:	the work struct through which this was scheduled
  *
  * Currently there is no option in this driver to disable the saving of
@@ -223,19 +194,14 @@ int max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev)
 	}
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&st->indio_dev->ring->access);
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &max1363_poll_func_th);
+	if (ret)
 		goto error_deallocate_sw_rb;
-	}
-	/* Configure the polling function called on trigger interrupts */
-	indio_dev->pollfunc->poll_func_main = &max1363_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
 
 	/* Ring buffer functions - here trigger setup related */
-	indio_dev->ring->postenable = &max1363_ring_postenable;
+	indio_dev->ring->postenable = &iio_triggered_ring_postenable;
 	indio_dev->ring->preenable = &max1363_ring_preenable;
-	indio_dev->ring->predisable = &max1363_ring_predisable;
+	indio_dev->ring->predisable = &iio_triggered_ring_predisable;
 	INIT_WORK(&st->poll_work, &max1363_poll_bh_to_ring);
 
 	/* Flag that polled ring buffering is possible */
@@ -258,13 +224,3 @@ void max1363_ring_cleanup(struct iio_dev *indio_dev)
 	kfree(indio_dev->pollfunc);
 	iio_sw_rb_free(indio_dev->ring);
 }
-
-void max1363_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-};
-
-int max1363_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-};
diff --git a/drivers/staging/iio/chrdev.h b/drivers/staging/iio/chrdev.h
index 3f96f8696a4..fd23bd1ea7b 100644
--- a/drivers/staging/iio/chrdev.h
+++ b/drivers/staging/iio/chrdev.h
@@ -73,8 +73,6 @@ struct iio_shared_ev_pointer {
  * @det_events:		list of detected events
  * @max_events:		maximum number of events before new ones are dropped
  * @current_events:	number of events in detected list
- * @id:			indentifier to allow the event interface to know which
- *			physical line it corresponds to
  * @attr:		this chrdev's minor number sysfs attribute
  * @owner:		ensure the driver module owns the file, not iio
  * @private:		driver specific data
@@ -90,7 +88,6 @@ struct iio_event_interface {
 	struct iio_detected_event_list		det_events;
 	int					max_events;
 	int					current_events;
-	int					id;
 	struct iio_chrdev_minor_attr		attr;
 	struct module				*owner;
 	void					*private;
diff --git a/drivers/staging/iio/gyro/Makefile b/drivers/staging/iio/gyro/Makefile
index 6d2c547686c..b5f0dc01122 100644
--- a/drivers/staging/iio/gyro/Makefile
+++ b/drivers/staging/iio/gyro/Makefile
@@ -1,4 +1,4 @@
-
+#
 # Makefile for digital gyroscope sensor drivers
 #
 
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index f19efb4c91c..812440af57d 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -85,7 +85,6 @@
  * struct adis16260_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
@@ -97,7 +96,6 @@
 struct adis16260_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -113,13 +111,11 @@ int adis16260_set_irq(struct device *dev, bool enable);
  * filling. This may change!
  */
 
-enum adis16260_scan {
-	ADIS16260_SCAN_SUPPLY,
-	ADIS16260_SCAN_GYRO,
-	ADIS16260_SCAN_AUX_ADC,
-	ADIS16260_SCAN_TEMP,
-	ADIS16260_SCAN_ANGL,
-};
+#define ADIS16260_SCAN_SUPPLY	0
+#define ADIS16260_SCAN_GYRO	1
+#define ADIS16260_SCAN_AUX_ADC	2
+#define ADIS16260_SCAN_TEMP	3
+#define ADIS16260_SCAN_ANGL	4
 
 void adis16260_remove_trigger(struct iio_dev *indio_dev);
 int adis16260_probe_trigger(struct iio_dev *indio_dev);
@@ -132,8 +128,6 @@ ssize_t adis16260_read_data_from_ring(struct device *dev,
 int adis16260_configure_ring(struct iio_dev *indio_dev);
 void adis16260_unconfigure_ring(struct iio_dev *indio_dev);
 
-int adis16260_initialize_ring(struct iio_ring_buffer *ring);
-void adis16260_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
 static inline void adis16260_remove_trigger(struct iio_dev *indio_dev)
@@ -162,14 +156,5 @@ static inline void adis16260_unconfigure_ring(struct iio_dev *indio_dev)
 {
 }
 
-static inline int adis16260_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-}
-
-static inline void adis16260_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_ADIS16260_H_ */
diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c
index c93f4d580fc..134dfaae2f0 100644
--- a/drivers/staging/iio/gyro/adis16260_core.c
+++ b/drivers/staging/iio/gyro/adis16260_core.c
@@ -14,12 +14,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "../adc/adc.h"
 #include "gyro.h"
 
@@ -555,8 +556,7 @@ static int __devinit adis16260_probe(struct spi_device *spi)
 	if (ret)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
-
-	ret = adis16260_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
@@ -588,7 +588,7 @@ error_unregister_line:
 	if (spi->irq)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16260_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16260_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -622,15 +622,13 @@ static int adis16260_remove(struct spi_device *spi)
 	if (spi->irq)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16260_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 	iio_device_unregister(indio_dev);
 	adis16260_unconfigure_ring(indio_dev);
 	kfree(st->tx);
 	kfree(st->rx);
 	kfree(st);
 
-	return 0;
-
 err_ret:
 	return ret;
 }
diff --git a/drivers/staging/iio/gyro/adis16260_ring.c b/drivers/staging/iio/gyro/adis16260_ring.c
index 4c4390ca6d7..9ef7f9080dc 100644
--- a/drivers/staging/iio/gyro/adis16260_ring.c
+++ b/drivers/staging/iio/gyro/adis16260_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,16 +17,6 @@
 #include "../trigger.h"
 #include "adis16260.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
 static IIO_SCAN_EL_C(supply, ADIS16260_SCAN_SUPPLY, IIO_UNSIGNED(12),
 		ADIS16260_SUPPLY_OUT, NULL);
 static IIO_SCAN_EL_C(gyro, ADIS16260_SCAN_GYRO, IIO_SIGNED(14),
@@ -58,10 +49,10 @@ static struct attribute_group adis16260_scan_el_group = {
  * adis16260_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16260_poll_func_th(struct iio_dev *indio_dev)
+static void adis16260_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16260_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 }
 
@@ -133,10 +124,9 @@ static void adis16260_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16260_read_ring_data(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-						st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i] = be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -152,48 +142,6 @@ static void adis16260_trigger_bh_to_ring(struct work_struct *work_s)
 	return;
 }
 
-static int adis16260_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count)
-				/* Timestamp (aligned s64) and data */
-				size = (((indio_dev->scan_count * sizeof(s16))
-						+ sizeof(s64) - 1)
-					& ~(sizeof(s64) - 1))
-					+ sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16260_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-				indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16260_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-				indio_dev->pollfunc)
-		: 0;
-}
-
 void adis16260_unconfigure_ring(struct iio_dev *indio_dev)
 {
 	kfree(indio_dev->pollfunc);
@@ -225,18 +173,16 @@ int adis16260_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16260_data_rdy_ring_preenable;
-	ring->postenable = &adis16260_data_rdy_ring_postenable;
-	ring->predisable = &adis16260_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16260_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16260_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -244,13 +190,3 @@ error_iio_sw_rb_free:
 	iio_sw_rb_free(indio_dev->ring);
 	return ret;
 }
-
-int adis16260_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16260_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/gyro/adis16260_trigger.c b/drivers/staging/iio/gyro/adis16260_trigger.c
index b3c565942b8..de01537d257 100644
--- a/drivers/staging/iio/gyro/adis16260_trigger.c
+++ b/drivers/staging/iio/gyro/adis16260_trigger.c
@@ -23,8 +23,7 @@ static int adis16260_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16260_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -83,14 +82,13 @@ int adis16260_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16260_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16260-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16260-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
index fcee47cbe89..9d0ca128679 100644
--- a/drivers/staging/iio/iio.h
+++ b/drivers/staging/iio/iio.h
@@ -16,9 +16,7 @@
 #include "chrdev.h"
 
 /* IIO TODO LIST */
-/* Static device specific elements (conversion factors etc)
- * should be exported via sysfs
- *
+/*
  * Provide means of adjusting timer accuracy.
  * Currently assumes nano seconds.
  */
@@ -284,49 +282,6 @@ int iio_push_event(struct iio_dev *dev_info,
 		  s64 timestamp);
 
 /**
- * struct iio_work_cont - container for when singleton handler case matters
- * @ws:			[DEVICE] work_struct when not only possible event
- * @ws_nocheck:		[DEVICE] work_struct when only possible event
- * @address:		[DEVICE] associated register address
- * @mask:		[DEVICE] associated mask for identifying event source
- * @st:			[DEVICE] device specific state information
- **/
-struct iio_work_cont {
-	struct work_struct	ws;
-	struct work_struct	ws_nocheck;
-	int			address;
-	int			mask;
-	void			*st;
-};
-
-#define to_iio_work_cont_check(_ws)			\
-	container_of(_ws, struct iio_work_cont, ws)
-
-#define to_iio_work_cont_no_check(_ws)				\
-	container_of(_ws, struct iio_work_cont, ws_nocheck)
-
-/**
- * iio_init_work_cont() - intiialize the elements of a work container
- * @cont: the work container
- * @_checkfunc: function called when there are multiple possible int sources
- * @_nocheckfunc: function for when there is only one int source
- * @_add: driver dependent, typically a register address
- * @_mask: driver dependent, typically a bit mask for a register
- * @_st: driver dependent, typically pointer to a device state structure
- **/
-static inline void
-iio_init_work_cont(struct iio_work_cont *cont,
-		   void (*_checkfunc)(struct work_struct *),
-		   void (*_nocheckfunc)(struct work_struct *),
-		   int _add, int _mask, void *_st)
-{
-	INIT_WORK(&(cont)->ws, _checkfunc);
-	INIT_WORK(&(cont)->ws_nocheck, _nocheckfunc);
-	cont->address = _add;
-	cont->mask = _mask;
-	cont->st = _st;
-}
-/**
  * __iio_push_event() - tries to add an event to the list associated with a chrdev
  * @ev_int:		the event interface to which we are pushing the event
  * @ev_code:		the outgoing event code
@@ -428,7 +383,9 @@ void iio_put(void);
  **/
 void iio_get(void);
 
-/* Ring buffer related */
+/**
+ * iio_device_get_chrdev_minor() - get an unused minor number
+ **/
 int iio_device_get_chrdev_minor(void);
 void iio_device_free_chrdev_minor(int val);
 
diff --git a/drivers/staging/iio/imu/Kconfig b/drivers/staging/iio/imu/Kconfig
index 6308d6faad5..31a6233a206 100644
--- a/drivers/staging/iio/imu/Kconfig
+++ b/drivers/staging/iio/imu/Kconfig
@@ -6,9 +6,8 @@ comment "Inertial measurement units"
 config ADIS16300
 	tristate "Analog Devices ADIS16300 IMU SPI driver"
 	depends on SPI
-	select IIO_SW_RING
-	select IIO_RING_BUFFER
-	select IIO_TRIGGER
+	select IIO_SW_RING if IIO_RING_BUFFER
+	select IIO_TRIGGER if IIO_RING_BUFFER
 	help
 	  Say yes here to build support for Analog Devices adis16300 four degrees
 	  of freedom inertial sensor.
@@ -24,10 +23,9 @@ config ADIS16350
 
 config ADIS16400
 	tristate "Analog Devices ADIS16400/5 IMU SPI driver"
- 	depends on SPI
-	select IIO_SW_RING
-	select IIO_RING_BUFFER
-	select IIO_TRIGGER
- 	help
- 	  Say yes here to build support for Analog Devices adis16400/5 triaxial
- 	  inertial sensor with Magnetometer.
\ No newline at end of file
+	depends on SPI
+	select IIO_SW_RING if IIO_RING_BUFFER
+	select IIO_TRIGGER if IIO_RING_BUFFER
+	help
+	  Say yes here to build support for Analog Devices adis16400/5 triaxial
+	  inertial sensor with Magnetometer.
diff --git a/drivers/staging/iio/imu/Makefile b/drivers/staging/iio/imu/Makefile
index 31df7359e20..f3b450b6611 100644
--- a/drivers/staging/iio/imu/Makefile
+++ b/drivers/staging/iio/imu/Makefile
@@ -1,6 +1,7 @@
 #
 # Makefile for Inertial Measurement Units
 #
+
 adis16300-y             := adis16300_core.o
 adis16300-$(CONFIG_IIO_RING_BUFFER) += adis16300_ring.o adis16300_trigger.o
 obj-$(CONFIG_ADIS16300) += adis16300.o
@@ -11,4 +12,4 @@ obj-$(CONFIG_ADIS16350) += adis16350.o
 
 adis16400-y             := adis16400_core.o
 adis16400-$(CONFIG_IIO_RING_BUFFER) += adis16400_ring.o adis16400_trigger.o
-obj-$(CONFIG_ADIS16400) += adis16400.o
\ No newline at end of file
+obj-$(CONFIG_ADIS16400) += adis16400.o
diff --git a/drivers/staging/iio/imu/adis16300.h b/drivers/staging/iio/imu/adis16300.h
index 1c7ea5c840e..1f25d68064a 100644
--- a/drivers/staging/iio/imu/adis16300.h
+++ b/drivers/staging/iio/imu/adis16300.h
@@ -94,7 +94,6 @@
  * struct adis16300_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
@@ -106,7 +105,6 @@
 struct adis16300_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -115,30 +113,22 @@ struct adis16300_state {
 	struct mutex			buf_lock;
 };
 
-int adis16300_spi_read_burst(struct device *dev, u8 *rx);
-
 int adis16300_set_irq(struct device *dev, bool enable);
 
-int adis16300_reset(struct device *dev);
-
-int adis16300_check_status(struct device *dev);
-
 #ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
 
-enum adis16300_scan {
-	ADIS16300_SCAN_SUPPLY,
-	ADIS16300_SCAN_GYRO_X,
-	ADIS16300_SCAN_ACC_X,
-	ADIS16300_SCAN_ACC_Y,
-	ADIS16300_SCAN_ACC_Z,
-	ADIS16300_SCAN_TEMP,
-	ADIS16300_SCAN_ADC_0,
-	ADIS16300_SCAN_INCLI_X,
-	ADIS16300_SCAN_INCLI_Y,
-};
+#define ADIS16300_SCAN_SUPPLY	0
+#define ADIS16300_SCAN_GYRO_X	1
+#define ADIS16300_SCAN_ACC_X	2
+#define ADIS16300_SCAN_ACC_Y	3
+#define ADIS16300_SCAN_ACC_Z	4
+#define ADIS16300_SCAN_TEMP	5
+#define ADIS16300_SCAN_ADC_0	6
+#define ADIS16300_SCAN_INCLI_X	7
+#define ADIS16300_SCAN_INCLI_Y	8
 
 void adis16300_remove_trigger(struct iio_dev *indio_dev);
 int adis16300_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/imu/adis16300_core.c b/drivers/staging/iio/imu/adis16300_core.c
index 5a7e5ef9bc5..f1950d56cb1 100644
--- a/drivers/staging/iio/imu/adis16300_core.c
+++ b/drivers/staging/iio/imu/adis16300_core.c
@@ -14,12 +14,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "../accel/accel.h"
 #include "../accel/inclinometer.h"
 #include "../gyro/gyro.h"
@@ -29,10 +30,7 @@
 
 #define DRIVER_NAME		"adis16300"
 
-/* At the moment the spi framework doesn't allow global setting of cs_change.
- * It's in the likely to be added comment at the top of spi.h.
- * This means that use cannot be made of spi_write etc.
- */
+static int adis16300_check_status(struct device *dev);
 
 /**
  * adis16300_spi_write_reg_8() - write single byte to a register
@@ -79,11 +77,13 @@ static int adis16300_spi_write_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
+			.delay_usecs = 75,
 		}, {
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
+			.delay_usecs = 75,
 		},
 	};
 
@@ -122,12 +122,14 @@ static int adis16300_spi_read_reg_16(struct device *dev,
 			.tx_buf = st->tx,
 			.bits_per_word = 8,
 			.len = 2,
-			.cs_change = 0,
+			.cs_change = 1,
+			.delay_usecs = 75,
 		}, {
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
-			.cs_change = 0,
+			.cs_change = 1,
+			.delay_usecs = 75,
 		},
 	};
 
@@ -154,54 +156,6 @@ error_ret:
 	return ret;
 }
 
-/**
- * adis16300_spi_read_burst() - read all data registers
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @rx: somewhere to pass back the value read (min size is 24 bytes)
- **/
-int adis16300_spi_read_burst(struct device *dev, u8 *rx)
-{
-	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
-	u32 old_speed_hz = st->us->max_speed_hz;
-	int ret;
-
-	struct spi_transfer xfers[] = {
-		{
-			.tx_buf = st->tx,
-			.bits_per_word = 8,
-			.len = 2,
-			.cs_change = 0,
-		}, {
-			.rx_buf = rx,
-			.bits_per_word = 8,
-			.len = 18,
-			.cs_change = 0,
-		},
-	};
-
-	mutex_lock(&st->buf_lock);
-	st->tx[0] = ADIS16300_READ_REG(ADIS16300_GLOB_CMD);
-	st->tx[1] = 0;
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfers[0], &msg);
-	spi_message_add_tail(&xfers[1], &msg);
-
-	st->us->max_speed_hz = min(ADIS16300_SPI_BURST, old_speed_hz);
-	spi_setup(st->us);
-
-	ret = spi_sync(st->us, &msg);
-	if (ret)
-		dev_err(&st->us->dev, "problem when burst reading");
-
-	st->us->max_speed_hz = old_speed_hz;
-	spi_setup(st->us);
-	mutex_unlock(&st->buf_lock);
-	return ret;
-}
-
 static ssize_t adis16300_spi_read_signed(struct device *dev,
 		struct device_attribute *attr,
 		char *buf,
@@ -240,6 +194,24 @@ static ssize_t adis16300_read_12bit_unsigned(struct device *dev,
 	return sprintf(buf, "%u\n", val & 0x0FFF);
 }
 
+static ssize_t adis16300_read_14bit_unsigned(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret;
+	u16 val = 0;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = adis16300_spi_read_reg_16(dev, this_attr->address, &val);
+	if (ret)
+		return ret;
+
+	if (val & ADIS16300_ERROR_ACTIVE)
+		adis16300_check_status(dev);
+
+	return sprintf(buf, "%u\n", val & 0x3FFF);
+}
+
 static ssize_t adis16300_read_14bit_signed(struct device *dev,
 		struct device_attribute *attr,
 		char *buf)
@@ -356,6 +328,18 @@ static ssize_t adis16300_write_frequency(struct device *dev,
 	return ret ? ret : len;
 }
 
+static int adis16300_reset(struct device *dev)
+{
+	int ret;
+	ret = adis16300_spi_write_reg_8(dev,
+			ADIS16300_GLOB_CMD,
+			ADIS16300_GLOB_CMD_SW_RESET);
+	if (ret)
+		dev_err(dev, "problem resetting device");
+
+	return ret;
+}
+
 static ssize_t adis16300_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
@@ -371,8 +355,6 @@ static ssize_t adis16300_write_reset(struct device *dev,
 	return -1;
 }
 
-
-
 int adis16300_set_irq(struct device *dev, bool enable)
 {
 	int ret;
@@ -396,32 +378,37 @@ error_ret:
 	return ret;
 }
 
-int adis16300_reset(struct device *dev)
+/* Power down the device */
+static int adis16300_stop_device(struct device *dev)
 {
 	int ret;
-	ret = adis16300_spi_write_reg_8(dev,
-			ADIS16300_GLOB_CMD,
-			ADIS16300_GLOB_CMD_SW_RESET);
+	u16 val = ADIS16300_SLP_CNT_POWER_OFF;
+
+	ret = adis16300_spi_write_reg_16(dev, ADIS16300_SLP_CNT, val);
 	if (ret)
-		dev_err(dev, "problem resetting device");
+		dev_err(dev, "problem with turning device off: SLP_CNT");
 
 	return ret;
 }
 
-/* Power down the device */
-static int adis16300_stop_device(struct device *dev)
+static int adis16300_self_test(struct device *dev)
 {
 	int ret;
-	u16 val = ADIS16300_SLP_CNT_POWER_OFF;
+	ret = adis16300_spi_write_reg_16(dev,
+			ADIS16300_MSC_CTRL,
+			ADIS16300_MSC_CTRL_MEM_TEST);
+	if (ret) {
+		dev_err(dev, "problem starting self test");
+		goto err_ret;
+	}
 
-	ret = adis16300_spi_write_reg_16(dev, ADIS16300_SLP_CNT, val);
-	if (ret)
-		dev_err(dev, "problem with turning device off: SLP_CNT");
+	adis16300_check_status(dev);
 
+err_ret:
 	return ret;
 }
 
-int adis16300_check_status(struct device *dev)
+static int adis16300_check_status(struct device *dev)
 {
 	u16 status;
 	int ret;
@@ -483,6 +470,11 @@ static int adis16300_initial_setup(struct adis16300_state *st)
 	}
 
 	/* Do self test */
+	ret = adis16300_self_test(dev);
+	if (ret) {
+		dev_err(dev, "self test failure");
+		goto err_ret;
+	}
 
 	/* Read status register to check the result */
 	ret = adis16300_check_status(dev);
@@ -526,7 +518,7 @@ static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
 		adis16300_write_16bit,
 		ADIS16300_ZACCL_OFF);
 
-static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16300_read_14bit_signed,
+static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16300_read_14bit_unsigned,
 			   ADIS16300_SUPPLY_OUT);
 static IIO_CONST_ATTR(in_supply_scale, "0.00242");
 
@@ -548,7 +540,7 @@ static IIO_DEV_ATTR_INCLI_Y(adis16300_read_13bit_signed,
 		ADIS16300_YINCLI_OUT);
 static IIO_CONST_ATTR(incli_scale, "0.044 d");
 
-static IIO_DEV_ATTR_TEMP_RAW(adis16300_read_12bit_signed);
+static IIO_DEV_ATTR_TEMP_RAW(adis16300_read_12bit_unsigned);
 static IIO_CONST_ATTR(temp_offset, "198.16 K");
 static IIO_CONST_ATTR(temp_scale, "0.14 K");
 
@@ -653,21 +645,13 @@ static int __devinit adis16300_probe(struct spi_device *spi)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = adis16300_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
 	}
 
-	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
-#if 0 /* fixme: here we should support */
-		iio_init_work_cont(&st->work_cont_thresh,
-				NULL,
-				adis16300_thresh_handler_bh_no_check,
-				0,
-				0,
-				st);
-#endif
+	if (spi->irq) {
 		ret = iio_register_interrupt_line(spi->irq,
 				st->indio_dev,
 				0,
@@ -688,13 +672,12 @@ static int __devinit adis16300_probe(struct spi_device *spi)
 	return 0;
 
 error_remove_trigger:
-	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
-		adis16300_remove_trigger(st->indio_dev);
+	adis16300_remove_trigger(st->indio_dev);
 error_unregister_line:
-	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+	if (spi->irq)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16300_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16300_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -712,7 +695,6 @@ error_ret:
 	return ret;
 }
 
-/* fixme, confirm ordering in this function */
 static int adis16300_remove(struct spi_device *spi)
 {
 	int ret;
@@ -726,12 +708,12 @@ static int adis16300_remove(struct spi_device *spi)
 	flush_scheduled_work();
 
 	adis16300_remove_trigger(indio_dev);
-	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+	if (spi->irq)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16300_uninitialize_ring(indio_dev->ring);
-	adis16300_unconfigure_ring(indio_dev);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	iio_device_unregister(indio_dev);
+	adis16300_unconfigure_ring(indio_dev);
 	kfree(st->tx);
 	kfree(st->rx);
 	kfree(st);
diff --git a/drivers/staging/iio/imu/adis16300_ring.c b/drivers/staging/iio/imu/adis16300_ring.c
index 76cf8a6f3c3..fc93160acb2 100644
--- a/drivers/staging/iio/imu/adis16300_ring.c
+++ b/drivers/staging/iio/imu/adis16300_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,17 +17,7 @@
 #include "../trigger.h"
 #include "adis16300.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
-static IIO_SCAN_EL_C(supply, ADIS16300_SCAN_SUPPLY, IIO_SIGNED(14),
+static IIO_SCAN_EL_C(supply, ADIS16300_SCAN_SUPPLY, IIO_UNSIGNED(14),
 		     ADIS16300_SUPPLY_OUT, NULL);
 
 static IIO_SCAN_EL_C(gyro_x, ADIS16300_SCAN_GYRO_X, IIO_SIGNED(14),
@@ -39,9 +30,9 @@ static IIO_SCAN_EL_C(accel_y, ADIS16300_SCAN_ACC_Y, IIO_SIGNED(14),
 static IIO_SCAN_EL_C(accel_z, ADIS16300_SCAN_ACC_Z, IIO_SIGNED(14),
 		     ADIS16300_ZACCL_OUT, NULL);
 
-static IIO_SCAN_EL_C(temp, ADIS16300_SCAN_TEMP, IIO_SIGNED(12),
+static IIO_SCAN_EL_C(temp, ADIS16300_SCAN_TEMP, IIO_UNSIGNED(12),
 		     ADIS16300_TEMP_OUT, NULL);
-static IIO_SCAN_EL_C(adc_0, ADIS16300_SCAN_ADC_0, IIO_SIGNED(12),
+static IIO_SCAN_EL_C(adc_0, ADIS16300_SCAN_ADC_0, IIO_UNSIGNED(12),
 		     ADIS16300_AUX_ADC, NULL);
 
 static IIO_SCAN_EL_C(incli_x, ADIS16300_SCAN_INCLI_X, IIO_SIGNED(12),
@@ -74,10 +65,10 @@ static struct attribute_group adis16300_scan_el_group = {
  * adis16300_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16300_poll_func_th(struct iio_dev *indio_dev)
+static void adis16300_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 	/* Indicate that this interrupt is being handled */
 
@@ -87,6 +78,54 @@ static void adis16300_poll_func_th(struct iio_dev *indio_dev)
 	 */
 }
 
+/**
+ * adis16300_spi_read_burst() - read all data registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @rx: somewhere to pass back the value read (min size is 24 bytes)
+ **/
+static int adis16300_spi_read_burst(struct device *dev, u8 *rx)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16300_state *st = iio_dev_get_devdata(indio_dev);
+	u32 old_speed_hz = st->us->max_speed_hz;
+	int ret;
+
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 0,
+		}, {
+			.rx_buf = rx,
+			.bits_per_word = 8,
+			.len = 18,
+			.cs_change = 0,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16300_READ_REG(ADIS16300_GLOB_CMD);
+	st->tx[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+
+	st->us->max_speed_hz = ADIS16300_SPI_BURST;
+	spi_setup(st->us);
+
+	ret = spi_sync(st->us, &msg);
+	if (ret)
+		dev_err(&st->us->dev, "problem when burst reading");
+
+	st->us->max_speed_hz = old_speed_hz;
+	spi_setup(st->us);
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
 /* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
  * specific to be rolled into the core.
  */
@@ -109,10 +148,9 @@ static void adis16300_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16300_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-							  st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i] = be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -127,45 +165,6 @@ static void adis16300_trigger_bh_to_ring(struct work_struct *work_s)
 
 	return;
 }
-/* in these circumstances is it better to go with unaligned packing and
- * deal with the cost?*/
-static int adis16300_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count) /* Timestamp and data */
-				size = 4*sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16300_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-					       indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16300_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-						indio_dev->pollfunc)
-		: 0;
-}
 
 void adis16300_unconfigure_ring(struct iio_dev *indio_dev)
 {
@@ -202,18 +201,16 @@ int adis16300_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16300_data_rdy_ring_preenable;
-	ring->postenable = &adis16300_data_rdy_ring_postenable;
-	ring->predisable = &adis16300_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16300_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16300_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -222,12 +219,3 @@ error_iio_sw_rb_free:
 	return ret;
 }
 
-int adis16300_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16300_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/imu/adis16300_trigger.c b/drivers/staging/iio/imu/adis16300_trigger.c
index 54edb20bf11..64036cd9910 100644
--- a/drivers/staging/iio/imu/adis16300_trigger.c
+++ b/drivers/staging/iio/imu/adis16300_trigger.c
@@ -23,8 +23,7 @@ static int adis16300_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16300_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -86,14 +85,13 @@ int adis16300_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16300_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16300-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16300-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/imu/adis16350.h b/drivers/staging/iio/imu/adis16350.h
index 334b18ace38..b00001e3edd 100644
--- a/drivers/staging/iio/imu/adis16350.h
+++ b/drivers/staging/iio/imu/adis16350.h
@@ -100,7 +100,6 @@
  * struct adis16350_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
@@ -112,7 +111,6 @@
 struct adis16350_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_data_rdy;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -125,19 +123,17 @@ int adis16350_set_irq(struct device *dev, bool enable);
 
 #ifdef CONFIG_IIO_RING_BUFFER
 
-enum adis16350_scan {
-	ADIS16350_SCAN_SUPPLY,
-	ADIS16350_SCAN_GYRO_X,
-	ADIS16350_SCAN_GYRO_Y,
-	ADIS16350_SCAN_GYRO_Z,
-	ADIS16350_SCAN_ACC_X,
-	ADIS16350_SCAN_ACC_Y,
-	ADIS16350_SCAN_ACC_Z,
-	ADIS16350_SCAN_TEMP_X,
-	ADIS16350_SCAN_TEMP_Y,
-	ADIS16350_SCAN_TEMP_Z,
-	ADIS16350_SCAN_ADC_0
-};
+#define ADIS16350_SCAN_SUPPLY	0
+#define ADIS16350_SCAN_GYRO_X	1
+#define ADIS16350_SCAN_GYRO_Y	2
+#define ADIS16350_SCAN_GYRO_Z	3
+#define ADIS16350_SCAN_ACC_X	4
+#define ADIS16350_SCAN_ACC_Y	5
+#define ADIS16350_SCAN_ACC_Z	6
+#define ADIS16350_SCAN_TEMP_X	7
+#define ADIS16350_SCAN_TEMP_Y	8
+#define ADIS16350_SCAN_TEMP_Z	9
+#define ADIS16350_SCAN_ADC_0	10
 
 void adis16350_remove_trigger(struct iio_dev *indio_dev);
 int adis16350_probe_trigger(struct iio_dev *indio_dev);
@@ -150,8 +146,6 @@ ssize_t adis16350_read_data_from_ring(struct device *dev,
 int adis16350_configure_ring(struct iio_dev *indio_dev);
 void adis16350_unconfigure_ring(struct iio_dev *indio_dev);
 
-int adis16350_initialize_ring(struct iio_ring_buffer *ring);
-void adis16350_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
 static inline void adis16350_remove_trigger(struct iio_dev *indio_dev)
@@ -171,7 +165,7 @@ adis16350_read_data_from_ring(struct device *dev,
 	return 0;
 }
 
-static int adis16350_configure_ring(struct iio_dev *indio_dev)
+static inline int adis16350_configure_ring(struct iio_dev *indio_dev)
 {
 	return 0;
 }
@@ -179,15 +173,5 @@ static int adis16350_configure_ring(struct iio_dev *indio_dev)
 static inline void adis16350_unconfigure_ring(struct iio_dev *indio_dev)
 {
 }
-
-static inline int adis16350_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-}
-
-static inline void adis16350_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_ADIS16350_H_ */
diff --git a/drivers/staging/iio/imu/adis16350_core.c b/drivers/staging/iio/imu/adis16350_core.c
index 0edde73ce5c..1575b7b5d44 100644
--- a/drivers/staging/iio/imu/adis16350_core.c
+++ b/drivers/staging/iio/imu/adis16350_core.c
@@ -14,12 +14,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "../accel/accel.h"
 #include "../adc/adc.h"
 #include "../gyro/gyro.h"
@@ -75,13 +76,13 @@ static int adis16350_spi_write_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.tx_buf = st->tx + 2,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -121,13 +122,13 @@ static int adis16350_spi_read_reg_16(struct device *dev,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		}, {
 			.rx_buf = st->rx,
 			.bits_per_word = 8,
 			.len = 2,
 			.cs_change = 1,
-			.delay_usecs = 25,
+			.delay_usecs = 35,
 		},
 	};
 
@@ -619,7 +620,7 @@ static int __devinit adis16350_probe(struct spi_device *spi)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = adis16350_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
@@ -651,7 +652,7 @@ error_unregister_line:
 	if (spi->irq)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16350_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16350_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -685,7 +686,7 @@ static int adis16350_remove(struct spi_device *spi)
 	if (spi->irq)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16350_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(indio_dev->ring);
 	iio_device_unregister(indio_dev);
 	adis16350_unconfigure_ring(indio_dev);
 	kfree(st->tx);
diff --git a/drivers/staging/iio/imu/adis16350_ring.c b/drivers/staging/iio/imu/adis16350_ring.c
index 5e9716ea7c7..e053e9aaa2e 100644
--- a/drivers/staging/iio/imu/adis16350_ring.c
+++ b/drivers/staging/iio/imu/adis16350_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,16 +17,6 @@
 #include "../trigger.h"
 #include "adis16350.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
 static IIO_SCAN_EL_C(supply, ADIS16350_SCAN_SUPPLY, IIO_UNSIGNED(12),
 		ADIS16350_SUPPLY_OUT, NULL);
 
@@ -80,10 +71,10 @@ static struct attribute_group adis16350_scan_el_group = {
  * adis16350_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16350_poll_func_th(struct iio_dev *indio_dev)
+static void adis16350_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16350_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 }
 
@@ -157,10 +148,9 @@ static void adis16350_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16350_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-							  st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i] = be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -176,48 +166,6 @@ static void adis16350_trigger_bh_to_ring(struct work_struct *work_s)
 	return;
 }
 
-static int adis16350_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count)
-				/* Timestamp (aligned sizeof(s64) and data */
-				size = (((indio_dev->scan_count * sizeof(s16))
-						+ sizeof(s64) - 1)
-					& ~(sizeof(s64) - 1))
-					+ sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16350_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-					       indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16350_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-						indio_dev->pollfunc)
-		: 0;
-}
-
 void adis16350_unconfigure_ring(struct iio_dev *indio_dev)
 {
 	kfree(indio_dev->pollfunc);
@@ -255,18 +203,16 @@ int adis16350_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16350_data_rdy_ring_preenable;
-	ring->postenable = &adis16350_data_rdy_ring_postenable;
-	ring->predisable = &adis16350_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16350_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16350_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -275,12 +221,3 @@ error_iio_sw_rb_free:
 	return ret;
 }
 
-int adis16350_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16350_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/imu/adis16350_trigger.c b/drivers/staging/iio/imu/adis16350_trigger.c
index 1ffa75d05fa..76edccc85b7 100644
--- a/drivers/staging/iio/imu/adis16350_trigger.c
+++ b/drivers/staging/iio/imu/adis16350_trigger.c
@@ -23,8 +23,7 @@ static int adis16350_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16350_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -86,14 +85,13 @@ int adis16350_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16350_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16350-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16350-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index 5a69a7ab91c..6ff33e1ad8c 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -126,7 +126,6 @@
  * struct adis16400_state - device instance specific data
  * @us:			actual spi_device
  * @work_trigger_to_ring: bh for triggered event handling
- * @work_cont_thresh: CLEAN
  * @inter:		used to check if new interrupt has been triggered
  * @last_timestamp:	passing timestamp from th to bh of interrupt handler
  * @indio_dev:		industrial I/O device structure
@@ -138,7 +137,6 @@
 struct adis16400_state {
 	struct spi_device		*us;
 	struct work_struct		work_trigger_to_ring;
-	struct iio_work_cont		work_cont_thresh;
 	s64				last_timestamp;
 	struct iio_dev			*indio_dev;
 	struct iio_trigger		*trig;
@@ -147,33 +145,25 @@ struct adis16400_state {
 	struct mutex			buf_lock;
 };
 
-int adis16400_spi_read_burst(struct device *dev, u8 *rx);
-
 int adis16400_set_irq(struct device *dev, bool enable);
 
-int adis16400_reset(struct device *dev);
-
-int adis16400_check_status(struct device *dev);
-
 #ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer
  * filling. This may change!
  */
 
-enum adis16400_scan {
-	ADIS16400_SCAN_SUPPLY,
-	ADIS16400_SCAN_GYRO_X,
-	ADIS16400_SCAN_GYRO_Y,
-	ADIS16400_SCAN_GYRO_Z,
-	ADIS16400_SCAN_ACC_X,
-	ADIS16400_SCAN_ACC_Y,
-	ADIS16400_SCAN_ACC_Z,
-	ADIS16400_SCAN_MAGN_X,
-	ADIS16400_SCAN_MAGN_Y,
-	ADIS16400_SCAN_MAGN_Z,
-	ADIS16400_SCAN_TEMP,
-	ADIS16400_SCAN_ADC_0
-};
+#define ADIS16400_SCAN_SUPPLY	0
+#define ADIS16400_SCAN_GYRO_X	1
+#define ADIS16400_SCAN_GYRO_Y	2
+#define ADIS16400_SCAN_GYRO_Z	3
+#define ADIS16400_SCAN_ACC_X	4
+#define ADIS16400_SCAN_ACC_Y	5
+#define ADIS16400_SCAN_ACC_Z	6
+#define ADIS16400_SCAN_MAGN_X	7
+#define ADIS16400_SCAN_MAGN_Y	8
+#define ADIS16400_SCAN_MAGN_Z	9
+#define ADIS16400_SCAN_TEMP	10
+#define ADIS16400_SCAN_ADC_0	11
 
 void adis16400_remove_trigger(struct iio_dev *indio_dev);
 int adis16400_probe_trigger(struct iio_dev *indio_dev);
@@ -186,8 +176,6 @@ ssize_t adis16400_read_data_from_ring(struct device *dev,
 int adis16400_configure_ring(struct iio_dev *indio_dev);
 void adis16400_unconfigure_ring(struct iio_dev *indio_dev);
 
-int adis16400_initialize_ring(struct iio_ring_buffer *ring);
-void adis16400_uninitialize_ring(struct iio_ring_buffer *ring);
 #else /* CONFIG_IIO_RING_BUFFER */
 
 static inline void adis16400_remove_trigger(struct iio_dev *indio_dev)
@@ -216,14 +204,5 @@ static inline void adis16400_unconfigure_ring(struct iio_dev *indio_dev)
 {
 }
 
-static inline int adis16400_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return 0;
-}
-
-static inline void adis16400_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-
 #endif /* CONFIG_IIO_RING_BUFFER */
 #endif /* SPI_ADIS16400_H_ */
diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
index e69e2ce47da..6013fee218e 100644
--- a/drivers/staging/iio/imu/adis16400_core.c
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -21,12 +21,13 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
-
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
+#include "../ring_generic.h"
 #include "../accel/accel.h"
 #include "../adc/adc.h"
 #include "../gyro/gyro.h"
@@ -36,6 +37,8 @@
 
 #define DRIVER_NAME		"adis16400"
 
+static int adis16400_check_status(struct device *dev);
+
 /* At the moment the spi framework doesn't allow global setting of cs_change.
  * It's in the likely to be added comment at the top of spi.h.
  * This means that use cannot be made of spi_write etc.
@@ -161,54 +164,6 @@ error_ret:
 	return ret;
 }
 
-/**
- * adis16400_spi_read_burst() - read all data registers
- * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @rx: somewhere to pass back the value read (min size is 24 bytes)
- **/
-int adis16400_spi_read_burst(struct device *dev, u8 *rx)
-{
-	struct spi_message msg;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
-	u32 old_speed_hz = st->us->max_speed_hz;
-	int ret;
-
-	struct spi_transfer xfers[] = {
-		{
-			.tx_buf = st->tx,
-			.bits_per_word = 8,
-			.len = 2,
-			.cs_change = 0,
-		}, {
-			.rx_buf = rx,
-			.bits_per_word = 8,
-			.len = 24,
-			.cs_change = 1,
-		},
-	};
-
-	mutex_lock(&st->buf_lock);
-	st->tx[0] = ADIS16400_READ_REG(ADIS16400_GLOB_CMD);
-	st->tx[1] = 0;
-
-	spi_message_init(&msg);
-	spi_message_add_tail(&xfers[0], &msg);
-	spi_message_add_tail(&xfers[1], &msg);
-
-	st->us->max_speed_hz = min(ADIS16400_SPI_BURST, old_speed_hz);
-	spi_setup(st->us);
-
-	ret = spi_sync(st->us, &msg);
-	if (ret)
-		dev_err(&st->us->dev, "problem when burst reading");
-
-	st->us->max_speed_hz = old_speed_hz;
-	spi_setup(st->us);
-	mutex_unlock(&st->buf_lock);
-	return ret;
-}
-
 static ssize_t adis16400_spi_read_signed(struct device *dev,
 		struct device_attribute *attr,
 		char *buf,
@@ -277,7 +232,6 @@ static ssize_t adis16400_read_12bit_signed(struct device *dev,
 	return ret;
 }
 
-
 static ssize_t adis16400_write_16bit(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf,
@@ -349,6 +303,18 @@ static ssize_t adis16400_write_frequency(struct device *dev,
 	return ret ? ret : len;
 }
 
+static int adis16400_reset(struct device *dev)
+{
+	int ret;
+	ret = adis16400_spi_write_reg_8(dev,
+			ADIS16400_GLOB_CMD,
+			ADIS16400_GLOB_CMD_SW_RESET);
+	if (ret)
+		dev_err(dev, "problem resetting device");
+
+	return ret;
+}
+
 static ssize_t adis16400_write_reset(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t len)
@@ -364,8 +330,6 @@ static ssize_t adis16400_write_reset(struct device *dev,
 	return -1;
 }
 
-
-
 int adis16400_set_irq(struct device *dev, bool enable)
 {
 	int ret;
@@ -388,18 +352,6 @@ error_ret:
 	return ret;
 }
 
-int adis16400_reset(struct device *dev)
-{
-	int ret;
-	ret = adis16400_spi_write_reg_8(dev,
-			ADIS16400_GLOB_CMD,
-			ADIS16400_GLOB_CMD_SW_RESET);
-	if (ret)
-		dev_err(dev, "problem resetting device");
-
-	return ret;
-}
-
 /* Power down the device */
 static int adis16400_stop_device(struct device *dev)
 {
@@ -430,7 +382,7 @@ err_ret:
 	return ret;
 }
 
-int adis16400_check_status(struct device *dev)
+static int adis16400_check_status(struct device *dev)
 {
 	u16 status;
 	int ret;
@@ -496,6 +448,11 @@ static int adis16400_initial_setup(struct adis16400_state *st)
 	}
 
 	/* Do self test */
+	ret = adis16400_self_test(dev);
+	if (ret) {
+		dev_err(dev, "self test failure");
+		goto err_ret;
+	}
 
 	/* Read status register to check the result */
 	ret = adis16400_check_status(dev);
@@ -685,21 +642,13 @@ static int __devinit adis16400_probe(struct spi_device *spi)
 		goto error_unreg_ring_funcs;
 	regdone = 1;
 
-	ret = adis16400_initialize_ring(st->indio_dev->ring);
+	ret = iio_ring_buffer_register(st->indio_dev->ring, 0);
 	if (ret) {
 		printk(KERN_ERR "failed to initialize the ring\n");
 		goto error_unreg_ring_funcs;
 	}
 
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
-#if 0 /* fixme: here we should support */
-		iio_init_work_cont(&st->work_cont_thresh,
-				NULL,
-				adis16400_thresh_handler_bh_no_check,
-				0,
-				0,
-				st);
-#endif
 		ret = iio_register_interrupt_line(spi->irq,
 				st->indio_dev,
 				0,
@@ -726,7 +675,7 @@ error_unregister_line:
 	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
 		iio_unregister_interrupt_line(st->indio_dev, 0);
 error_uninitialize_ring:
-	adis16400_uninitialize_ring(st->indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 error_unreg_ring_funcs:
 	adis16400_unconfigure_ring(st->indio_dev);
 error_free_dev:
@@ -761,7 +710,7 @@ static int adis16400_remove(struct spi_device *spi)
 	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
 		iio_unregister_interrupt_line(indio_dev, 0);
 
-	adis16400_uninitialize_ring(indio_dev->ring);
+	iio_ring_buffer_unregister(st->indio_dev->ring);
 	adis16400_unconfigure_ring(indio_dev);
 	iio_device_unregister(indio_dev);
 	kfree(st->tx);
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 5529b32bd2e..949db76283d 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -6,6 +6,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
+#include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/list.h>
 
@@ -16,16 +17,6 @@
 #include "../trigger.h"
 #include "adis16400.h"
 
-/**
- * combine_8_to_16() utility function to munge to u8s into u16
- **/
-static inline u16 combine_8_to_16(u8 lower, u8 upper)
-{
-	u16 _lower = lower;
-	u16 _upper = upper;
-	return _lower | (_upper << 8);
-}
-
 static IIO_SCAN_EL_C(supply, ADIS16400_SCAN_SUPPLY, IIO_SIGNED(14),
 		     ADIS16400_SUPPLY_OUT, NULL);
 
@@ -83,10 +74,10 @@ static struct attribute_group adis16400_scan_el_group = {
  * adis16400_poll_func_th() top half interrupt handler called by trigger
  * @private_data:	iio_dev
  **/
-static void adis16400_poll_func_th(struct iio_dev *indio_dev)
+static void adis16400_poll_func_th(struct iio_dev *indio_dev, s64 time)
 {
 	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
-	st->last_timestamp = indio_dev->trig->timestamp;
+	st->last_timestamp = time;
 	schedule_work(&st->work_trigger_to_ring);
 	/* Indicate that this interrupt is being handled */
 
@@ -96,6 +87,54 @@ static void adis16400_poll_func_th(struct iio_dev *indio_dev)
 	 */
 }
 
+/**
+ * adis16400_spi_read_burst() - read all data registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @rx: somewhere to pass back the value read (min size is 24 bytes)
+ **/
+static int adis16400_spi_read_burst(struct device *dev, u8 *rx)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	u32 old_speed_hz = st->us->max_speed_hz;
+	int ret;
+
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 0,
+		}, {
+			.rx_buf = rx,
+			.bits_per_word = 8,
+			.len = 24,
+			.cs_change = 1,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16400_READ_REG(ADIS16400_GLOB_CMD);
+	st->tx[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+
+	st->us->max_speed_hz = min(ADIS16400_SPI_BURST, old_speed_hz);
+	spi_setup(st->us);
+
+	ret = spi_sync(st->us, &msg);
+	if (ret)
+		dev_err(&st->us->dev, "problem when burst reading");
+
+	st->us->max_speed_hz = old_speed_hz;
+	spi_setup(st->us);
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
 /* Whilst this makes a lot of calls to iio_sw_ring functions - it is to device
  * specific to be rolled into the core.
  */
@@ -118,10 +157,9 @@ static void adis16400_trigger_bh_to_ring(struct work_struct *work_s)
 
 	if (st->indio_dev->scan_count)
 		if (adis16400_spi_read_burst(&st->indio_dev->dev, st->rx) >= 0)
-			for (; i < st->indio_dev->scan_count; i++) {
-				data[i] = combine_8_to_16(st->rx[i*2+1],
-							  st->rx[i*2]);
-			}
+			for (; i < st->indio_dev->scan_count; i++)
+				data[i]	= be16_to_cpup(
+					(__be16 *)&(st->rx[i*2]));
 
 	/* Guaranteed to be aligned with 8 byte boundary */
 	if (st->indio_dev->scan_timestamp)
@@ -136,45 +174,6 @@ static void adis16400_trigger_bh_to_ring(struct work_struct *work_s)
 
 	return;
 }
-/* in these circumstances is it better to go with unaligned packing and
- * deal with the cost?*/
-static int adis16400_data_rdy_ring_preenable(struct iio_dev *indio_dev)
-{
-	size_t size;
-	dev_dbg(&indio_dev->dev, "%s\n", __func__);
-	/* Check if there are any scan elements enabled, if not fail*/
-	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
-		return -EINVAL;
-
-	if (indio_dev->ring->access.set_bpd) {
-		if (indio_dev->scan_timestamp)
-			if (indio_dev->scan_count) /* Timestamp and data */
-				size = 6*sizeof(s64);
-			else /* Timestamp only  */
-				size = sizeof(s64);
-		else /* Data only */
-			size = indio_dev->scan_count*sizeof(s16);
-		indio_dev->ring->access.set_bpd(indio_dev->ring, size);
-	}
-
-	return 0;
-}
-
-static int adis16400_data_rdy_ring_postenable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_attach_poll_func(indio_dev->trig,
-					       indio_dev->pollfunc)
-		: 0;
-}
-
-static int adis16400_data_rdy_ring_predisable(struct iio_dev *indio_dev)
-{
-	return indio_dev->trig
-		? iio_trigger_dettach_poll_func(indio_dev->trig,
-						indio_dev->pollfunc)
-		: 0;
-}
 
 void adis16400_unconfigure_ring(struct iio_dev *indio_dev)
 {
@@ -214,18 +213,16 @@ int adis16400_configure_ring(struct iio_dev *indio_dev)
 	indio_dev->ring = ring;
 	/* Effectively select the ring buffer implementation */
 	iio_ring_sw_register_funcs(&ring->access);
-	ring->preenable = &adis16400_data_rdy_ring_preenable;
-	ring->postenable = &adis16400_data_rdy_ring_postenable;
-	ring->predisable = &adis16400_data_rdy_ring_predisable;
+	ring->bpe = 2;
+	ring->preenable = &iio_sw_ring_preenable;
+	ring->postenable = &iio_triggered_ring_postenable;
+	ring->predisable = &iio_triggered_ring_predisable;
 	ring->owner = THIS_MODULE;
 
-	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
-	if (indio_dev->pollfunc == NULL) {
-		ret = -ENOMEM;
-		goto error_iio_sw_rb_free;;
-	}
-	indio_dev->pollfunc->poll_func_main = &adis16400_poll_func_th;
-	indio_dev->pollfunc->private_data = indio_dev;
+	ret = iio_alloc_pollfunc(indio_dev, NULL, &adis16400_poll_func_th);
+	if (ret)
+		goto error_iio_sw_rb_free;
+
 	indio_dev->modes |= INDIO_RING_TRIGGERED;
 	return 0;
 
@@ -233,13 +230,3 @@ error_iio_sw_rb_free:
 	iio_sw_rb_free(indio_dev->ring);
 	return ret;
 }
-
-int adis16400_initialize_ring(struct iio_ring_buffer *ring)
-{
-	return iio_ring_buffer_register(ring, 0);
-}
-
-void adis16400_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-	iio_ring_buffer_unregister(ring);
-}
diff --git a/drivers/staging/iio/imu/adis16400_trigger.c b/drivers/staging/iio/imu/adis16400_trigger.c
index 3b3250ac768..aafe6010f1b 100644
--- a/drivers/staging/iio/imu/adis16400_trigger.c
+++ b/drivers/staging/iio/imu/adis16400_trigger.c
@@ -23,8 +23,7 @@ static int adis16400_data_rdy_trig_poll(struct iio_dev *dev_info,
 	struct adis16400_state *st = iio_dev_get_devdata(dev_info);
 	struct iio_trigger *trig = st->trig;
 
-	trig->timestamp = timestamp;
-	iio_trigger_poll(trig);
+	iio_trigger_poll(trig, timestamp);
 
 	return IRQ_HANDLED;
 }
@@ -86,14 +85,13 @@ int adis16400_probe_trigger(struct iio_dev *indio_dev)
 	struct adis16400_state *st = indio_dev->dev_data;
 
 	st->trig = iio_allocate_trigger();
-	st->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+	st->trig->name = kasprintf(GFP_KERNEL,
+				   "adis16400-dev%d",
+				   indio_dev->id);
 	if (!st->trig->name) {
 		ret = -ENOMEM;
 		goto error_free_trig;
 	}
-	snprintf((char *)st->trig->name,
-		 IIO_TRIGGER_NAME_LENGTH,
-		 "adis16400-dev%d", indio_dev->id);
 	st->trig->dev.parent = &st->us->dev;
 	st->trig->owner = THIS_MODULE;
 	st->trig->private_data = st;
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index 01030684ef2..dd4d87a8bca 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -30,9 +30,6 @@
 
 /* IDR to assign each registered device a unique id*/
 static DEFINE_IDR(iio_idr);
-
-/* IDR for general event identifiers */
-static DEFINE_IDR(iio_event_idr);
 /* IDR to allocate character device minor numbers */
 static DEFINE_IDR(iio_chrdev_idr);
 /* Lock used to protect both of the above */
@@ -654,16 +651,11 @@ static int iio_device_register_eventset(struct iio_dev *dev_info)
 
 	for (i = 0; i < dev_info->num_interrupt_lines; i++) {
 		dev_info->event_interfaces[i].owner = dev_info->driver_module;
-		ret = iio_get_new_idr_val(&iio_event_idr);
-		if (ret < 0)
-			goto error_free_setup_ev_ints;
-		else
-			dev_info->event_interfaces[i].id = ret;
 
 		snprintf(dev_info->event_interfaces[i]._name, 20,
 			 "%s:event%d",
 			 dev_name(&dev_info->dev),
-			 dev_info->event_interfaces[i].id);
+			 i);
 
 		ret = iio_setup_ev_int(&dev_info->event_interfaces[i],
 				       (const char *)(dev_info
@@ -674,8 +666,6 @@ static int iio_device_register_eventset(struct iio_dev *dev_info)
 		if (ret) {
 			dev_err(&dev_info->dev,
 				"Could not get chrdev interface\n");
-			iio_free_idr_val(&iio_event_idr,
-					 dev_info->event_interfaces[i].id);
 			goto error_free_setup_ev_ints;
 		}
 
@@ -711,11 +701,8 @@ error_remove_sysfs_interfaces:
 				   ->event_interfaces[j].dev.kobj,
 				   &dev_info->event_attrs[j]);
 error_free_setup_ev_ints:
-	for (j = 0; j < i; j++) {
-		iio_free_idr_val(&iio_event_idr,
-				 dev_info->event_interfaces[j].id);
+	for (j = 0; j < i; j++)
 		iio_free_ev_int(&dev_info->event_interfaces[j]);
-	}
 	kfree(dev_info->interrupts);
 error_free_event_interfaces:
 	kfree(dev_info->event_interfaces);
@@ -735,11 +722,8 @@ static void iio_device_unregister_eventset(struct iio_dev *dev_info)
 				   ->event_interfaces[i].dev.kobj,
 				   &dev_info->event_attrs[i]);
 
-	for (i = 0; i < dev_info->num_interrupt_lines; i++) {
-		iio_free_idr_val(&iio_event_idr,
-				 dev_info->event_interfaces[i].id);
+	for (i = 0; i < dev_info->num_interrupt_lines; i++)
 		iio_free_ev_int(&dev_info->event_interfaces[i]);
-	}
 	kfree(dev_info->interrupts);
 	kfree(dev_info->event_interfaces);
 }
diff --git a/drivers/staging/iio/industrialio-ring.c b/drivers/staging/iio/industrialio-ring.c
index ada159bbb1f..6ab578e4f5f 100644
--- a/drivers/staging/iio/industrialio-ring.c
+++ b/drivers/staging/iio/industrialio-ring.c
@@ -149,12 +149,10 @@ __iio_request_ring_buffer_event_chrdev(struct iio_ring_buffer *buf,
 {
 	int ret;
 
-	buf->ev_int.id = id;
-
 	snprintf(buf->ev_int._name, sizeof(buf->ev_int._name),
 		 "%s:event%d",
 		 dev_name(&buf->dev),
-		 buf->ev_int.id);
+		 id);
 	ret = iio_setup_ev_int(&(buf->ev_int),
 			       buf->ev_int._name,
 			       owner,
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c
index 5682e61600f..57dd9232cf0 100644
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/staging/iio/industrialio-trigger.c
@@ -31,7 +31,6 @@
  * Any other suggestions?
  */
 
-
 static DEFINE_IDR(iio_trigger_idr);
 static DEFINE_SPINLOCK(iio_trigger_idr_lock);
 
@@ -173,7 +172,7 @@ struct iio_trigger *iio_trigger_find_by_name(const char *name, size_t len)
 }
 EXPORT_SYMBOL(iio_trigger_find_by_name);
 
-void iio_trigger_poll(struct iio_trigger *trig)
+void iio_trigger_poll(struct iio_trigger *trig, s64 time)
 {
 	struct iio_poll_func *pf_cursor;
 
@@ -185,7 +184,8 @@ void iio_trigger_poll(struct iio_trigger *trig)
 	}
 	list_for_each_entry(pf_cursor, &trig->pollfunc_list, list) {
 		if (pf_cursor->poll_func_main) {
-			pf_cursor->poll_func_main(pf_cursor->private_data);
+			pf_cursor->poll_func_main(pf_cursor->private_data,
+						  time);
 			trig->use_count++;
 		}
 	}
@@ -198,8 +198,7 @@ void iio_trigger_notify_done(struct iio_trigger *trig)
 	if (trig->use_count == 0 && trig->try_reenable)
 		if (trig->try_reenable(trig)) {
 			/* Missed and interrupt so launch new poll now */
-			trig->timestamp = 0;
-			iio_trigger_poll(trig);
+			iio_trigger_poll(trig, 0);
 		}
 }
 EXPORT_SYMBOL(iio_trigger_notify_done);
@@ -284,7 +283,7 @@ error_ret:
 EXPORT_SYMBOL(iio_trigger_dettach_poll_func);
 
 /**
- * iio_trigger_read_currrent() trigger consumer sysfs query which trigger
+ * iio_trigger_read_currrent() - trigger consumer sysfs query which trigger
  *
  * For trigger consumers the current_trigger interface allows the trigger
  * used by the device to be queried.
@@ -296,10 +295,9 @@ static ssize_t iio_trigger_read_current(struct device *dev,
 	struct iio_dev *dev_info = dev_get_drvdata(dev);
 	int len = 0;
 	if (dev_info->trig)
-		len = snprintf(buf,
-			       IIO_TRIGGER_NAME_LENGTH,
-			       "%s\n",
-			       dev_info->trig->name);
+		len = sprintf(buf,
+			      "%s\n",
+			      dev_info->trig->name);
 	return len;
 }
 
@@ -324,8 +322,6 @@ static ssize_t iio_trigger_write_current(struct device *dev,
 	}
 	mutex_unlock(&dev_info->mlock);
 
-	len = len < IIO_TRIGGER_NAME_LENGTH ? len : IIO_TRIGGER_NAME_LENGTH;
-
 	dev_info->trig = iio_trigger_find_by_name(buf, len);
 	if (oldtrig && dev_info->trig != oldtrig)
 		iio_put_trigger(oldtrig);
@@ -402,3 +398,34 @@ int iio_device_unregister_trigger_consumer(struct iio_dev *dev_info)
 }
 EXPORT_SYMBOL(iio_device_unregister_trigger_consumer);
 
+int iio_alloc_pollfunc(struct iio_dev *indio_dev,
+		       void (*immediate)(struct iio_dev *indio_dev),
+		       void (*main)(struct iio_dev *private_data, s64 time))
+{
+	indio_dev->pollfunc = kzalloc(sizeof(*indio_dev->pollfunc), GFP_KERNEL);
+	if (indio_dev->pollfunc == NULL)
+		return -ENOMEM;
+	indio_dev->pollfunc->poll_func_immediate = immediate;
+	indio_dev->pollfunc->poll_func_main = main;
+	indio_dev->pollfunc->private_data = indio_dev;
+	return 0;
+}
+EXPORT_SYMBOL(iio_alloc_pollfunc);
+
+int iio_triggered_ring_postenable(struct iio_dev *indio_dev)
+{
+	return indio_dev->trig
+		? iio_trigger_attach_poll_func(indio_dev->trig,
+					       indio_dev->pollfunc)
+		: 0;
+}
+EXPORT_SYMBOL(iio_triggered_ring_postenable);
+
+int iio_triggered_ring_predisable(struct iio_dev *indio_dev)
+{
+	return indio_dev->trig
+		? iio_trigger_dettach_poll_func(indio_dev->trig,
+						indio_dev->pollfunc)
+		: 0;
+}
+EXPORT_SYMBOL(iio_triggered_ring_predisable);
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index 80cb6e590fb..3ddc478e618 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -12,4 +12,3 @@ config SENSORS_TSL2563
 
 	 This driver can also be built as a module.  If so, the module
 	 will be called tsl2563.
-
diff --git a/drivers/staging/iio/light/light.h b/drivers/staging/iio/light/light.h
index f00f827689c..e4e1e2c4139 100644
--- a/drivers/staging/iio/light/light.h
+++ b/drivers/staging/iio/light/light.h
@@ -2,11 +2,6 @@
 
 /* Light to digital sensor attributes */
 
-#define IIO_DEV_ATTR_LIGHT_INFRARED(_num, _show, _addr)			\
-	IIO_DEVICE_ATTR(light_infrared##_num, S_IRUGO, _show, NULL, _addr)
+#define IIO_EVENT_CODE_LIGHT_THRESH IIO_EVENT_CODE_LIGHT_BASE
 
-#define IIO_DEV_ATTR_LIGHT_BROAD(_num, _show, _addr)			\
-	IIO_DEVICE_ATTR(light_broadspectrum##_num, S_IRUGO, _show, NULL, _addr)
 
-#define IIO_DEV_ATTR_LIGHT_VISIBLE(_num, _show, _addr)			\
-	IIO_DEVICE_ATTR(light_visible##_num, S_IRUGO, _show, NULL, _addr)
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
index e4b0a5ef1c1..98f8b78f5d8 100644
--- a/drivers/staging/iio/light/tsl2563.c
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
@@ -117,15 +118,17 @@ struct tsl2563_chip {
 	struct iio_dev		*indio_dev;
 	struct delayed_work	poweroff_work;
 
+	struct work_struct	work_thresh;
+	s64			event_timestamp;
 	/* Remember state for suspend and resume functions */
 	pm_message_t		state;
 
 	struct tsl2563_gainlevel_coeff *gainlevel;
 
-	/* Thresholds are in lux */
 	u16			low_thres;
 	u16			high_thres;
 	u8			intr;
+	bool			int_enabled;
 
 	/* Calibration coefficients */
 	u32			calib0;
@@ -189,17 +192,29 @@ static int tsl2563_get_power(struct tsl2563_chip *chip)
 
 static int tsl2563_configure(struct tsl2563_chip *chip)
 {
-	struct i2c_client *client = chip->client;
 	int ret;
 
-	ret = tsl2563_write(client, TSL2563_REG_TIMING,
+	ret = tsl2563_write(chip->client, TSL2563_REG_TIMING,
 			chip->gainlevel->gaintime);
 	if (ret)
-		goto out;
-
-	ret = tsl2563_write(client, TSL2563_REG_INT, chip->intr);
-
-out:
+		goto error_ret;
+	ret = tsl2563_write(chip->client, TSL2563_REG_HIGHLOW,
+			chip->high_thres & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = tsl2563_write(chip->client, TSL2563_REG_HIGHHIGH,
+			(chip->high_thres >> 8) & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = tsl2563_write(chip->client, TSL2563_REG_LOWLOW,
+			chip->low_thres & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = tsl2563_write(chip->client, TSL2563_REG_LOWHIGH,
+			(chip->low_thres >> 8) & 0xFF);
+/* Interrupt register is automatically written anyway if it is relevant
+   so is not here */
+error_ret:
 	return ret;
 }
 
@@ -323,21 +338,23 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
 	if (chip->state.event != PM_EVENT_ON)
 		goto out;
 
-	cancel_delayed_work(&chip->poweroff_work);
-
-	if (!tsl2563_get_power(chip)) {
-		ret = tsl2563_set_power(chip, 1);
-		if (ret)
-			goto out;
-		ret = tsl2563_configure(chip);
-		if (ret)
-			goto out;
-		tsl2563_wait_adc(chip);
+	if (!chip->int_enabled) {
+		cancel_delayed_work(&chip->poweroff_work);
+
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+			tsl2563_wait_adc(chip);
+		}
 	}
 
 	while (retry) {
 		ret = tsl2563_read(client,
-				   TSL2563_REG_DATA0LOW | TSL2563_CLEARINT,
+				   TSL2563_REG_DATA0LOW,
 				   buf0, sizeof(buf0));
 		if (ret != sizeof(buf0))
 			goto out;
@@ -356,7 +373,8 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
 	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
 	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
 
-	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+	if (!chip->int_enabled)
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 
 	ret = 0;
 out:
@@ -449,11 +467,12 @@ static unsigned int adc_to_lux(u32 adc0, u32 adc1)
 /*                      Sysfs interface                         */
 /*--------------------------------------------------------------*/
 
-static ssize_t tsl2563_adc0_show(struct device *dev,
+static ssize_t tsl2563_adc_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
 
 	mutex_lock(&chip->lock);
@@ -462,26 +481,14 @@ static ssize_t tsl2563_adc0_show(struct device *dev,
 	if (ret)
 		goto out;
 
-	ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
-out:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static ssize_t tsl2563_adc1_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct tsl2563_chip *chip = indio_dev->dev_data;
-	int ret;
-
-	mutex_lock(&chip->lock);
-
-	ret = tsl2563_get_adc(chip);
-	if (ret)
-		goto out;
-
-	ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
+	switch (this_attr->address) {
+	case 0:
+		ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
+		break;
+	case 1:
+		ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
+		break;
+	}
 out:
 	mutex_unlock(&chip->lock);
 	return ret;
@@ -527,37 +534,36 @@ static ssize_t format_calib(char *buf, int len, u32 calib)
 	return snprintf(buf, PAGE_SIZE, "%d\n", calib_to_sysfs(calib));
 }
 
-static ssize_t tsl2563_calib0_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-	struct tsl2563_chip *chip = indio_dev->dev_data;
-	int ret;
-
-	mutex_lock(&chip->lock);
-	ret = format_calib(buf, PAGE_SIZE, chip->calib0);
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static ssize_t tsl2563_calib1_show(struct device *dev,
-				   struct device_attribute *attr, char *buf)
+static ssize_t tsl2563_calib_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret;
 
 	mutex_lock(&chip->lock);
-	ret = format_calib(buf, PAGE_SIZE, chip->calib1);
+	switch (this_attr->address) {
+	case 0:
+		ret = format_calib(buf, PAGE_SIZE, chip->calib0);
+		break;
+	case 1:
+		ret = format_calib(buf, PAGE_SIZE, chip->calib1);
+		break;
+	default:
+		ret = -ENODEV;
+	}
 	mutex_unlock(&chip->lock);
 	return ret;
 }
 
-static int do_calib_store(struct device *dev, const char *buf, size_t len,
-			  int ch)
+static ssize_t tsl2563_calib_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int value;
 	u32 calib;
 
@@ -566,37 +572,27 @@ static int do_calib_store(struct device *dev, const char *buf, size_t len,
 
 	calib = calib_from_sysfs(value);
 
-	if (ch)
-		chip->calib1 = calib;
-	else
+	switch (this_attr->address) {
+	case 0:
 		chip->calib0 = calib;
+		break;
+	case 1:
+		chip->calib1 = calib;
+		break;
+	}
 
 	return len;
 }
 
-static ssize_t tsl2563_calib0_store(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t len)
-{
-	return do_calib_store(dev, buf, len, 0);
-}
-
-static ssize_t tsl2563_calib1_store(struct device *dev,
-				    struct device_attribute *attr,
-				    const char *buf, size_t len)
-{
-	return do_calib_store(dev, buf, len, 1);
-}
-
-/* AmitXXXX: Convert to IIO_DEV_ATTR_LIGHT* as in tsl2561
- * once I understand what they mean */
-static DEVICE_ATTR(adc0, S_IRUGO, tsl2563_adc0_show, NULL);
-static DEVICE_ATTR(adc1, S_IRUGO, tsl2563_adc1_show, NULL);
+static IIO_DEVICE_ATTR(intensity_both_raw, S_IRUGO,
+		tsl2563_adc_show, NULL, 0);
+static IIO_DEVICE_ATTR(intensity_ir_raw, S_IRUGO,
+		tsl2563_adc_show, NULL, 1);
 static DEVICE_ATTR(illuminance0_input, S_IRUGO, tsl2563_lux_show, NULL);
-static DEVICE_ATTR(calib0, S_IRUGO | S_IWUSR,
-		   tsl2563_calib0_show, tsl2563_calib0_store);
-static DEVICE_ATTR(calib1, S_IRUGO | S_IWUSR,
-		   tsl2563_calib1_show, tsl2563_calib1_store);
+static IIO_DEVICE_ATTR(intensity_both_calibgain, S_IRUGO | S_IWUSR,
+		tsl2563_calib_show, tsl2563_calib_store, 0);
+static IIO_DEVICE_ATTR(intensity_ir_calibgain, S_IRUGO | S_IWUSR,
+		tsl2563_calib_show, tsl2563_calib_store, 1);
 
 static ssize_t tsl2563_show_name(struct device *dev,
 				struct device_attribute *attr,
@@ -610,11 +606,11 @@ static ssize_t tsl2563_show_name(struct device *dev,
 static DEVICE_ATTR(name, S_IRUGO, tsl2563_show_name, NULL);
 
 static struct attribute *tsl2563_attributes[] = {
-	&dev_attr_adc0.attr,
-	&dev_attr_adc1.attr,
+	&iio_dev_attr_intensity_both_raw.dev_attr.attr,
+	&iio_dev_attr_intensity_ir_raw.dev_attr.attr,
 	&dev_attr_illuminance0_input.attr,
-	&dev_attr_calib0.attr,
-	&dev_attr_calib1.attr,
+	&iio_dev_attr_intensity_both_calibgain.dev_attr.attr,
+	&iio_dev_attr_intensity_ir_calibgain.dev_attr.attr,
 	&dev_attr_name.attr,
 	NULL
 };
@@ -623,6 +619,192 @@ static const struct attribute_group tsl2563_group = {
 	.attrs = tsl2563_attributes,
 };
 
+static ssize_t tsl2563_read_thresh(struct device *dev,
+			struct device_attribute *attr,
+			char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	u16 val = 0;
+	switch (this_attr->address) {
+	case TSL2563_REG_HIGHLOW:
+		val = chip->high_thres;
+		break;
+	case TSL2563_REG_LOWLOW:
+		val = chip->low_thres;
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t tsl2563_write_thresh(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf,
+				size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+	mutex_lock(&chip->lock);
+	ret = tsl2563_write(chip->client, this_attr->address, val & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = tsl2563_write(chip->client, this_attr->address + 1,
+			(val >> 8) & 0xFF);
+	switch (this_attr->address) {
+	case TSL2563_REG_HIGHLOW:
+		chip->high_thres = val;
+		break;
+	case TSL2563_REG_LOWLOW:
+		chip->low_thres = val;
+		break;
+	}
+
+error_ret:
+	mutex_unlock(&chip->lock);
+
+	return ret < 0 ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(intensity_both_thresh_high_value,
+		S_IRUGO | S_IWUSR,
+		tsl2563_read_thresh,
+		tsl2563_write_thresh,
+		TSL2563_REG_HIGHLOW);
+
+static IIO_DEVICE_ATTR(intensity_both_thresh_low_value,
+		S_IRUGO | S_IWUSR,
+		tsl2563_read_thresh,
+		tsl2563_write_thresh,
+		TSL2563_REG_LOWLOW);
+
+static int tsl2563_int_th(struct iio_dev *dev_info,
+			int index,
+			s64 timestamp,
+			int not_test)
+{
+	struct tsl2563_chip *chip = dev_info->dev_data;
+
+	chip->event_timestamp = timestamp;
+	schedule_work(&chip->work_thresh);
+
+	return 0;
+}
+
+static void tsl2563_int_bh(struct work_struct *work_s)
+{
+	struct tsl2563_chip *chip
+		= container_of(work_s,
+			struct tsl2563_chip, work_thresh);
+	u8 cmd = TSL2563_CMD | TSL2563_CLEARINT;
+
+	iio_push_event(chip->indio_dev, 0,
+		IIO_EVENT_CODE_LIGHT_BASE,
+		chip->event_timestamp);
+
+	/* reenable_irq */
+	enable_irq(chip->client->irq);
+	/* clear the interrupt and push the event */
+	i2c_master_send(chip->client, &cmd, sizeof(cmd));
+
+}
+
+static ssize_t tsl2563_write_interrupt_config(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf,
+					size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
+	int input, ret = 0;
+
+	ret = sscanf(buf, "%d", &input);
+	if (ret != 1)
+		return -EINVAL;
+	mutex_lock(&chip->lock);
+	if (input && !(chip->intr & 0x30)) {
+		iio_add_event_to_list(this_attr->listel,
+				&indio_dev->interrupts[0]->ev_list);
+		chip->intr &= ~0x30;
+		chip->intr |= 0x10;
+		/* ensure the chip is actually on */
+		cancel_delayed_work(&chip->poweroff_work);
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+		}
+		ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+		chip->int_enabled = true;
+	}
+
+	if (!input && (chip->intr & 0x30)) {
+		chip->intr |= ~0x30;
+		ret = tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+		iio_remove_event_from_list(this_attr->listel,
+					&indio_dev->interrupts[0]->ev_list);
+		chip->int_enabled = false;
+		/* now the interrupt is not enabled, we can go to sleep */
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+	}
+out:
+	mutex_unlock(&chip->lock);
+
+	return (ret < 0) ? ret : len;
+}
+
+static ssize_t tsl2563_read_interrupt_config(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int ret;
+	u8 rxbuf;
+	ssize_t len;
+
+	mutex_lock(&chip->lock);
+	ret = tsl2563_read(chip->client,
+			TSL2563_REG_INT,
+			&rxbuf,
+			sizeof(rxbuf));
+	mutex_unlock(&chip->lock);
+	if (ret < 0)
+		goto error_ret;
+	len = snprintf(buf, PAGE_SIZE, "%d\n", !!(rxbuf & 0x30));
+error_ret:
+
+	return (ret < 0) ? ret : len;
+}
+
+IIO_EVENT_ATTR(intensity_both_thresh_both_en,
+	tsl2563_read_interrupt_config,
+	tsl2563_write_interrupt_config,
+	0,
+	tsl2563_int_th);
+
+static struct attribute *tsl2563_event_attributes[] = {
+	&iio_event_attr_intensity_both_thresh_both_en.dev_attr.attr,
+	&iio_dev_attr_intensity_both_thresh_high_value.dev_attr.attr,
+	&iio_dev_attr_intensity_both_thresh_low_value.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute_group tsl2563_event_attribute_group = {
+	.attrs = tsl2563_event_attributes,
+};
+
 /*--------------------------------------------------------------*/
 /*                      Probe, Attach, Remove                   */
 /*--------------------------------------------------------------*/
@@ -641,6 +823,7 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 	if (!chip)
 		return -ENOMEM;
 
+	INIT_WORK(&chip->work_thresh, tsl2563_int_bh);
 	i2c_set_clientdata(client, chip);
 	chip->client = client;
 
@@ -679,18 +862,36 @@ static int __devinit tsl2563_probe(struct i2c_client *client,
 	chip->indio_dev->dev_data = (void *)(chip);
 	chip->indio_dev->driver_module = THIS_MODULE;
 	chip->indio_dev->modes = INDIO_DIRECT_MODE;
+	if (client->irq) {
+		chip->indio_dev->num_interrupt_lines = 1;
+		chip->indio_dev->event_attrs
+			= &tsl2563_event_attribute_group;
+	}
 	ret = iio_device_register(chip->indio_dev);
 	if (ret)
 		goto fail1;
 
+	if (client->irq) {
+		ret = iio_register_interrupt_line(client->irq,
+						chip->indio_dev,
+						0,
+						IRQF_TRIGGER_RISING,
+						client->name);
+		if (ret)
+			goto fail2;
+	}
 	err = tsl2563_configure(chip);
 	if (err)
-		goto fail2;
+		goto fail3;
 
 	INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
+	/* The interrupt cannot yet be enabled so this is fine without lock */
 	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 
 	return 0;
+fail3:
+	if (client->irq)
+		iio_unregister_interrupt_line(chip->indio_dev, 0);
 fail2:
 	iio_device_unregister(chip->indio_dev);
 fail1:
@@ -701,7 +902,15 @@ fail1:
 static int tsl2563_remove(struct i2c_client *client)
 {
 	struct tsl2563_chip *chip = i2c_get_clientdata(client);
-
+	if (!chip->int_enabled)
+		cancel_delayed_work(&chip->poweroff_work);
+	/* Ensure that interrupts are disabled - then flush any bottom halves */
+	chip->intr |= ~0x30;
+	tsl2563_write(chip->client, TSL2563_REG_INT, chip->intr);
+	flush_scheduled_work();
+	tsl2563_set_power(chip, 0);
+	if (client->irq)
+		iio_unregister_interrupt_line(chip->indio_dev, 0);
 	iio_device_unregister(chip->indio_dev);
 
 	kfree(chip);
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
new file mode 100644
index 00000000000..d01445060f5
--- /dev/null
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -0,0 +1,15 @@
+#
+# Magnetometer sensors
+#
+comment "Magnetometer sensors"
+
+config SENSORS_HMC5843
+	tristate "Honeywell HMC5843 3-Axis Magnetometer"
+	depends on I2C
+	help
+	  Say Y here to add support for the Honeywell HMC 5843 3-Axis
+	  Magnetometer (digital compass).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hmc5843
+
diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
new file mode 100644
index 00000000000..f9bfb2e11d7
--- /dev/null
+++ b/drivers/staging/iio/magnetometer/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for industrial I/O Magnetometer sensors
+#
+
+obj-$(CONFIG_SENSORS_HMC5843)	+= hmc5843.o
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c
new file mode 100644
index 00000000000..92f6c6fb90f
--- /dev/null
+++ b/drivers/staging/iio/magnetometer/hmc5843.c
@@ -0,0 +1,624 @@
+/*  Copyright (C) 2010 Texas Instruments
+    Author: Shubhrajyoti Datta <shubhrajyoti@ti.com>
+    Acknowledgement: Jonathan Cameron <jic23@cam.ac.uk> for valuable inputs.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include "../iio.h"
+#include "../sysfs.h"
+#include "magnet.h"
+
+#define HMC5843_I2C_ADDRESS			0x1E
+
+#define HMC5843_CONFIG_REG_A			0x00
+#define HMC5843_CONFIG_REG_B			0x01
+#define HMC5843_MODE_REG			0x02
+#define HMC5843_DATA_OUT_X_MSB_REG		0x03
+#define HMC5843_DATA_OUT_X_LSB_REG		0x04
+#define HMC5843_DATA_OUT_Y_MSB_REG		0x05
+#define HMC5843_DATA_OUT_Y_LSB_REG		0x06
+#define HMC5843_DATA_OUT_Z_MSB_REG		0x07
+#define HMC5843_DATA_OUT_Z_LSB_REG		0x08
+#define HMC5843_STATUS_REG			0x09
+#define HMC5843_ID_REG_A			0x0A
+#define HMC5843_ID_REG_B			0x0B
+#define HMC5843_ID_REG_C			0x0C
+
+#define HMC5843_ID_REG_LENGTH			0x03
+#define HMC5843_ID_STRING			"H43"
+
+/*
+ * Range settings in  (+-)Ga
+ * */
+#define RANGE_GAIN_OFFSET			0x05
+
+#define	RANGE_0_7				0x00
+#define	RANGE_1_0				0x01 /* default */
+#define	RANGE_1_5				0x02
+#define	RANGE_2_0				0x03
+#define	RANGE_3_2				0x04
+#define	RANGE_3_8				0x05
+#define	RANGE_4_5				0x06
+#define	RANGE_6_5				0x07 /* Not recommended */
+
+/*
+ * Device status
+ */
+#define	DATA_READY  				0x01
+#define	DATA_OUTPUT_LOCK  			0x02
+#define	VOLTAGE_REGULATOR_ENABLED  		0x04
+
+/*
+ * Mode register configuration
+ */
+#define	MODE_CONVERSION_CONTINUOUS		0x00
+#define	MODE_CONVERSION_SINGLE			0x01
+#define	MODE_IDLE				0x02
+#define	MODE_SLEEP				0x03
+
+/* Minimum Data Output Rate in 1/10 Hz  */
+#define RATE_OFFSET				0x02
+#define RATE_BITMASK				0x1C
+#define	RATE_5					0x00
+#define	RATE_10					0x01
+#define	RATE_20					0x02
+#define	RATE_50					0x03
+#define	RATE_100				0x04
+#define	RATE_200				0x05
+#define	RATE_500				0x06
+#define	RATE_NOT_USED				0x07
+
+/*
+ * Device Configutration
+ */
+#define	CONF_NORMAL  				0x00
+#define	CONF_POSITIVE_BIAS			0x01
+#define	CONF_NEGATIVE_BIAS			0x02
+#define	CONF_NOT_USED				0x03
+#define	MEAS_CONF_MASK				0x03
+
+static const int regval_to_counts_per_mg[] = {
+	1620,
+	1300,
+	970,
+	780,
+	530,
+	460,
+	390,
+	280
+};
+static const int regval_to_input_field_mg[] = {
+	700,
+	1000,
+	1500,
+	2000,
+	3200,
+	3800,
+	4500,
+	6500
+};
+static const char *regval_to_samp_freq[] = {
+	"0.5",
+	"1",
+	"2",
+	"5",
+	"10",
+	"20",
+	"50",
+};
+
+/* Addresses to scan: 0x1E */
+static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS,
+							I2C_CLIENT_END };
+
+/* Each client has this additional data */
+struct hmc5843_data {
+	struct iio_dev	*indio_dev;
+	struct mutex lock;
+	u8		rate;
+	u8		meas_conf;
+	u8		operating_mode;
+	u8		range;
+};
+
+static void hmc5843_init_client(struct i2c_client *client);
+
+static s32 hmc5843_configure(struct i2c_client *client,
+				       u8 operating_mode)
+{
+	/* The lower two bits contain the current conversion mode */
+	return i2c_smbus_write_byte_data(client,
+					HMC5843_MODE_REG,
+					(operating_mode & 0x03));
+}
+
+/* Return the measurement value from the  specified channel */
+static ssize_t hmc5843_read_measurement(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	s16 coordinate_val;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	s32 result;
+
+	mutex_lock(&data->lock);
+
+	result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG);
+	while (!(result & DATA_READY))
+		result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG);
+
+	result = i2c_smbus_read_word_data(client, this_attr->address);
+	mutex_unlock(&data->lock);
+	if (result < 0)
+		return -EINVAL;
+
+	coordinate_val	= (s16)swab16((u16)result);
+	return sprintf(buf, "%d\n", coordinate_val);
+}
+static IIO_DEV_ATTR_MAGN_X(hmc5843_read_measurement,
+		HMC5843_DATA_OUT_X_MSB_REG);
+static IIO_DEV_ATTR_MAGN_Y(hmc5843_read_measurement,
+		HMC5843_DATA_OUT_Y_MSB_REG);
+static IIO_DEV_ATTR_MAGN_Z(hmc5843_read_measurement,
+		HMC5843_DATA_OUT_Z_MSB_REG);
+
+/*
+ * From the datasheet
+ * 0 - Continuous-Conversion Mode: In continuous-conversion mode, the
+ * device continuously performs conversions an places the result in the
+ * data register.
+ *
+ * 1 - Single-Conversion Mode : device performs a single measurement,
+ *  sets RDY high and returned to sleep mode
+ *
+ * 2 - Idle Mode :  Device is placed in idle mode.
+ *
+ * 3 - Sleep Mode. Device is placed in sleep mode.
+ *
+ */
+static ssize_t hmc5843_show_operating_mode(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	return sprintf(buf, "%d\n", data->operating_mode);
+}
+
+static ssize_t hmc5843_set_operating_mode(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf,
+				size_t count)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	unsigned long operating_mode = 0;
+	s32 status;
+	int error;
+	mutex_lock(&data->lock);
+	error = strict_strtoul(buf, 10, &operating_mode);
+	if (error)
+		return error;
+	dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode);
+	if (operating_mode > MODE_SLEEP)
+			return -EINVAL;
+
+	status = i2c_smbus_write_byte_data(client, this_attr->address,
+					operating_mode);
+	if (status) {
+		count = -EINVAL;
+		goto exit;
+	}
+	data->operating_mode = operating_mode;
+
+exit:
+	mutex_unlock(&data->lock);
+	return count;
+}
+static IIO_DEVICE_ATTR(operating_mode,
+			S_IWUSR | S_IRUGO,
+			hmc5843_show_operating_mode,
+			hmc5843_set_operating_mode,
+			HMC5843_MODE_REG);
+
+/*
+ * API for setting the measurement configuration to
+ * Normal, Positive bias and Negative bias
+ * From the datasheet
+ *
+ * Normal measurement configuration (default): In normal measurement
+ * configuration the device follows normal measurement flow. Pins BP and BN
+ * are left floating and high impedance.
+ *
+ * Positive bias configuration: In positive bias configuration, a positive
+ * current is forced across the resistive load on pins BP and BN.
+ *
+ * Negative bias configuration. In negative bias configuration, a negative
+ * current is forced across the resistive load on pins BP and BN.
+ *
+ */
+static s32 hmc5843_set_meas_conf(struct i2c_client *client,
+				      u8 meas_conf)
+{
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	u8 reg_val;
+	reg_val = (meas_conf & MEAS_CONF_MASK) |  (data->rate << RATE_OFFSET);
+	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
+}
+
+static ssize_t hmc5843_show_measurement_configuration(struct device *dev,
+						struct device_attribute *attr,
+						char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	return sprintf(buf, "%d\n", data->meas_conf);
+}
+
+static ssize_t hmc5843_set_measurement_configuration(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf,
+						size_t count)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	unsigned long meas_conf = 0;
+	int error = strict_strtoul(buf, 10, &meas_conf);
+	if (error)
+		return error;
+	mutex_lock(&data->lock);
+
+	dev_dbg(dev, "set mode to %lu\n", meas_conf);
+	if (hmc5843_set_meas_conf(client, meas_conf)) {
+		count = -EINVAL;
+		goto exit;
+	}
+	data->meas_conf = meas_conf;
+
+exit:
+	mutex_unlock(&data->lock);
+	return count;
+}
+static IIO_DEVICE_ATTR(meas_conf,
+			S_IWUSR | S_IRUGO,
+			hmc5843_show_measurement_configuration,
+			hmc5843_set_measurement_configuration,
+			0);
+
+/*
+ * From Datasheet
+ * The table shows the minimum data output
+ * Value	| Minimum data output rate(Hz)
+ * 0		| 0.5
+ * 1		| 1
+ * 2		| 2
+ * 3		| 5
+ * 4		| 10 (default)
+ * 5		| 20
+ * 6		| 50
+ * 7		| Not used
+ */
+static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("0.5 1 2 5 10 20 50");
+
+static s32 hmc5843_set_rate(struct i2c_client *client,
+				u8 rate)
+{
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	u8 reg_val;
+
+	reg_val = (data->meas_conf) |  (rate << RATE_OFFSET);
+	if (rate >= RATE_NOT_USED) {
+		dev_err(&client->dev,
+			"This data output rate is not supported \n");
+		return -EINVAL;
+	}
+	return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val);
+}
+
+static ssize_t set_sampling_frequency(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	unsigned long rate = 0;
+
+	if (strncmp(buf, "0.5" , 3) == 0)
+		rate = RATE_5;
+	else if (strncmp(buf, "1" , 1) == 0)
+		rate = RATE_10;
+	else if (strncmp(buf, "2", 1) == 0)
+		rate = RATE_20;
+	else if (strncmp(buf, "5", 1) == 0)
+		rate = RATE_50;
+	else if (strncmp(buf, "10", 2) == 0)
+		rate = RATE_100;
+	else if (strncmp(buf, "20" , 2) == 0)
+		rate = RATE_200;
+	else if (strncmp(buf, "50" , 2) == 0)
+		rate = RATE_500;
+	else
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	dev_dbg(dev, "set rate to %lu\n", rate);
+	if (hmc5843_set_rate(client, rate)) {
+		count = -EINVAL;
+		goto exit;
+	}
+	data->rate = rate;
+
+exit:
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static ssize_t show_sampling_frequency(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	u32 rate;
+
+	rate = i2c_smbus_read_byte_data(client,  this_attr->address);
+	if (rate < 0)
+		return -EINVAL;
+	rate = (rate & RATE_BITMASK) >> RATE_OFFSET;
+	return sprintf(buf, "%s\n", regval_to_samp_freq[rate]);
+}
+static IIO_DEVICE_ATTR(sampling_frequency,
+			S_IWUSR | S_IRUGO,
+			show_sampling_frequency,
+			set_sampling_frequency,
+			HMC5843_CONFIG_REG_A);
+
+/*
+ * From Datasheet
+ *	Nominal gain settings
+ * Value	| Sensor Input Field Range(Ga)	| Gain(counts/ milli-gauss)
+ *0		|(+-)0.7			|1620
+ *1		|(+-)1.0			|1300
+ *2		|(+-)1.5			|970
+ *3		|(+-)2.0			|780
+ *4		|(+-)3.2			|530
+ *5		|(+-)3.8			|460
+ *6		|(+-)4.5			|390
+ *7		|(+-)6.5			|280
+ */
+static ssize_t show_range(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	u8 range;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hmc5843_data *data = indio_dev->dev_data;
+
+	range = data->range;
+	return sprintf(buf, "%d\n", regval_to_input_field_mg[range]);
+}
+
+static ssize_t set_range(struct device *dev,
+			struct device_attribute *attr,
+			const char *buf,
+			size_t count)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	unsigned long range = 0;
+	int error;
+	mutex_lock(&data->lock);
+	error = strict_strtoul(buf, 10, &range);
+	if (error)
+		return error;
+	dev_dbg(dev, "set range to %lu\n", range);
+
+	if (range > RANGE_6_5)
+		return -EINVAL;
+
+	data->range = range;
+	range = range << RANGE_GAIN_OFFSET;
+	if (i2c_smbus_write_byte_data(client, this_attr->address, range))
+		count = -EINVAL;
+
+	mutex_unlock(&data->lock);
+	return count;
+
+}
+static IIO_DEVICE_ATTR(magn_range,
+			S_IWUSR | S_IRUGO,
+			show_range,
+			set_range,
+			HMC5843_CONFIG_REG_B);
+
+static ssize_t show_gain(struct device *dev,
+			struct device_attribute *attr,
+			char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct hmc5843_data *data = indio_dev->dev_data;
+	return sprintf(buf, "%d\n", regval_to_counts_per_mg[data->range]);
+}
+static IIO_DEVICE_ATTR(magn_gain,
+			S_IRUGO,
+			show_gain,
+			NULL , 0);
+
+static struct attribute *hmc5843_attributes[] = {
+	&iio_dev_attr_meas_conf.dev_attr.attr,
+	&iio_dev_attr_operating_mode.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_dev_attr_magn_range.dev_attr.attr,
+	&iio_dev_attr_magn_gain.dev_attr.attr,
+	&iio_dev_attr_magn_x_raw.dev_attr.attr,
+	&iio_dev_attr_magn_y_raw.dev_attr.attr,
+	&iio_dev_attr_magn_z_raw.dev_attr.attr,
+	&iio_const_attr_available_sampling_frequency.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group hmc5843_group = {
+	.attrs = hmc5843_attributes,
+};
+
+static int hmc5843_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	unsigned char id_str[HMC5843_ID_REG_LENGTH];
+
+	if (client->addr != HMC5843_I2C_ADDRESS)
+		return -ENODEV;
+
+	if (i2c_smbus_read_i2c_block_data(client, HMC5843_ID_REG_A,
+				HMC5843_ID_REG_LENGTH, id_str)
+			!= HMC5843_ID_REG_LENGTH)
+		return -ENODEV;
+
+	if (0 != strncmp(id_str, HMC5843_ID_STRING, HMC5843_ID_REG_LENGTH))
+		return -ENODEV;
+
+	return 0;
+}
+
+/* Called when we have found a new HMC5843. */
+static void hmc5843_init_client(struct i2c_client *client)
+{
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	hmc5843_set_meas_conf(client, data->meas_conf);
+	hmc5843_set_rate(client, data->rate);
+	hmc5843_configure(client, data->operating_mode);
+	i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range);
+	mutex_init(&data->lock);
+	pr_info("HMC5843 initialized\n");
+}
+
+static int hmc5843_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct hmc5843_data *data;
+	int err = 0;
+
+	data = kzalloc(sizeof(struct hmc5843_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	/* default settings at probe */
+
+	data->meas_conf = CONF_NORMAL;
+	data->range = RANGE_1_0;
+	data->operating_mode = MODE_CONVERSION_CONTINUOUS;
+
+	i2c_set_clientdata(client, data);
+
+	/* Initialize the HMC5843 chip */
+	hmc5843_init_client(client);
+
+	data->indio_dev = iio_allocate_device();
+	if (!data->indio_dev) {
+		err = -ENOMEM;
+		goto exit_free1;
+	}
+	data->indio_dev->attrs = &hmc5843_group;
+	data->indio_dev->dev.parent = &client->dev;
+	data->indio_dev->dev_data = (void *)(data);
+	data->indio_dev->driver_module = THIS_MODULE;
+	data->indio_dev->modes = INDIO_DIRECT_MODE;
+	err = iio_device_register(data->indio_dev);
+	if (err)
+		goto exit_free2;
+	return 0;
+exit_free2:
+	iio_free_device(data->indio_dev);
+exit_free1:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int hmc5843_remove(struct i2c_client *client)
+{
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	 /*  sleep mode to save power */
+	hmc5843_configure(client, MODE_SLEEP);
+	iio_device_unregister(data->indio_dev);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static int hmc5843_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	hmc5843_configure(client, MODE_SLEEP);
+	return 0;
+}
+
+static int hmc5843_resume(struct i2c_client *client)
+{
+	struct hmc5843_data *data = i2c_get_clientdata(client);
+	hmc5843_configure(client, data->operating_mode);
+	return 0;
+}
+
+static const struct i2c_device_id hmc5843_id[] = {
+	{ "hmc5843", 0 },
+	{ }
+};
+
+static struct i2c_driver hmc5843_driver = {
+	.driver = {
+		.name	= "hmc5843",
+	},
+	.id_table	= hmc5843_id,
+	.probe		= hmc5843_probe,
+	.remove		= hmc5843_remove,
+	.detect		= hmc5843_detect,
+	.address_list	= normal_i2c,
+	.suspend	= hmc5843_suspend,
+	.resume		= hmc5843_resume,
+};
+
+static int __init hmc5843_init(void)
+{
+	return i2c_add_driver(&hmc5843_driver);
+}
+
+static void __exit hmc5843_exit(void)
+{
+	i2c_del_driver(&hmc5843_driver);
+}
+
+MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com");
+MODULE_DESCRIPTION("HMC5843 driver");
+MODULE_LICENSE("GPL");
+
+module_init(hmc5843_init);
+module_exit(hmc5843_exit);
diff --git a/drivers/staging/iio/ring_generic.h b/drivers/staging/iio/ring_generic.h
index 0e443757b02..a872d3904a3 100644
--- a/drivers/staging/iio/ring_generic.h
+++ b/drivers/staging/iio/ring_generic.h
@@ -11,6 +11,8 @@
 #define _IIO_RING_GENERIC_H_
 #include "iio.h"
 
+#ifdef CONFIG_IIO_RING_BUFFER
+
 struct iio_handler;
 struct iio_ring_buffer;
 struct iio_dev;
@@ -98,6 +100,7 @@ struct iio_ring_access_funcs {
  * @access_id:		device id number
  * @length:		[DEVICE] number of datums in ring
  * @bpd:		[DEVICE] size of individual datum including timestamp
+ * @bpe:		[DEVICE] size of individual channel value
  * @loopcount:		[INTERN] number of times the ring has looped
  * @access_handler:	[INTERN] chrdev access handling
  * @ev_int:		[INTERN] chrdev interface for the event chrdev
@@ -119,6 +122,7 @@ struct iio_ring_buffer {
 	int				access_id;
 	int				length;
 	int				bpd;
+	int				bpe;
 	int				loopcount;
 	struct iio_handler		access_handler;
 	struct iio_event_interface	ev_int;
@@ -213,7 +217,7 @@ ssize_t iio_scan_el_ts_show(struct device *dev, struct device_attribute *attr,
  * @_label:	indentification variable used by drivers.  Often a reg address.
  * @_controlfunc: function used to notify hardware of whether state changes
  **/
-#define IIO_SCAN_EL_C(_name, _number, _bits, _label, _controlfunc)	\
+#define __IIO_SCAN_EL_C(_name, _number, _bits, _label, _controlfunc)	\
 	struct iio_scan_el iio_scan_el_##_name = {			\
 		.dev_attr = __ATTR(_number##_##_name##_en,		\
 				   S_IRUGO | S_IWUSR,			\
@@ -225,7 +229,10 @@ ssize_t iio_scan_el_ts_show(struct device *dev, struct device_attribute *attr,
 		.set_state = _controlfunc,				\
 	}
 
-#define IIO_SCAN_NAMED_EL_C(_name, _string, _number, _bits, _label, _cf) \
+#define IIO_SCAN_EL_C(_name, _number, _bits, _label, _controlfunc)	\
+	__IIO_SCAN_EL_C(_name, _number, _bits, _label, _controlfunc)
+
+#define __IIO_SCAN_NAMED_EL_C(_name, _string, _number, _bits, _label, _cf) \
 	struct iio_scan_el iio_scan_el_##_name = {			\
 		.dev_attr = __ATTR(_number##_##_string##_en,		\
 				   S_IRUGO | S_IWUSR,			\
@@ -236,7 +243,8 @@ ssize_t iio_scan_el_ts_show(struct device *dev, struct device_attribute *attr,
 		.label = _label,					\
 		.set_state = _cf,					\
 	}
-
+#define IIO_SCAN_NAMED_EL_C(_name, _string, _number, _bits, _label, _cf) \
+	__IIO_SCAN_NAMED_EL_C(_name, _string, _number, _bits, _label, _cf)
 /**
  * IIO_SCAN_EL_TIMESTAMP - declare a special scan element for timestamps
  *
@@ -287,5 +295,14 @@ ssize_t iio_show_ring_enable(struct device *dev,
 #define IIO_RING_ENABLE_ATTR DEVICE_ATTR(ring_enable, S_IRUGO | S_IWUSR, \
 					 iio_show_ring_enable,		\
 					 iio_store_ring_enable)
+#else /* CONFIG_IIO_RING_BUFFER */
+static inline int iio_ring_buffer_register(struct iio_ring_buffer *ring, int id)
+{
+	return 0;
+};
+static inline void iio_ring_buffer_unregister(struct iio_ring_buffer *ring)
+{};
+
+#endif /* CONFIG_IIO_RING_BUFFER */
 
 #endif /* _IIO_RING_GENERIC_H_ */
diff --git a/drivers/staging/iio/ring_sw.c b/drivers/staging/iio/ring_sw.c
index 294272d0619..e2f01c640ba 100644
--- a/drivers/staging/iio/ring_sw.c
+++ b/drivers/staging/iio/ring_sw.c
@@ -13,6 +13,7 @@
 #include <linux/device.h>
 #include <linux/workqueue.h>
 #include "ring_sw.h"
+#include "trigger.h"
 
 static inline int __iio_allocate_sw_ring_buffer(struct iio_sw_ring_buffer *ring,
 						int bytes_per_datum, int length)
@@ -431,5 +432,73 @@ void iio_sw_rb_free(struct iio_ring_buffer *r)
 		iio_put_ring_buffer(r);
 }
 EXPORT_SYMBOL(iio_sw_rb_free);
+
+int iio_sw_ring_preenable(struct iio_dev *indio_dev)
+{
+	size_t size;
+	dev_dbg(&indio_dev->dev, "%s\n", __func__);
+	/* Check if there are any scan elements enabled, if not fail*/
+	if (!(indio_dev->scan_count || indio_dev->scan_timestamp))
+		return -EINVAL;
+	if (indio_dev->scan_timestamp)
+		if (indio_dev->scan_count)
+			/* Timestamp (aligned to s64) and data */
+			size = (((indio_dev->scan_count * indio_dev->ring->bpe)
+					+ sizeof(s64) - 1)
+				& ~(sizeof(s64) - 1))
+				+ sizeof(s64);
+		else /* Timestamp only  */
+			size = sizeof(s64);
+	else /* Data only */
+		size = indio_dev->scan_count * indio_dev->ring->bpe;
+	indio_dev->ring->access.set_bpd(indio_dev->ring, size);
+
+	return 0;
+}
+EXPORT_SYMBOL(iio_sw_ring_preenable);
+
+void iio_sw_trigger_bh_to_ring(struct work_struct *work_s)
+{
+	struct iio_sw_ring_helper_state *st
+		= container_of(work_s, struct iio_sw_ring_helper_state,
+			work_trigger_to_ring);
+	int len = 0;
+	size_t datasize = st->indio_dev
+		->ring->access.get_bpd(st->indio_dev->ring);
+	char *data = kmalloc(datasize, GFP_KERNEL);
+
+	if (data == NULL) {
+		dev_err(st->indio_dev->dev.parent,
+			"memory alloc failed in ring bh");
+		return;
+	}
+
+	if (st->indio_dev->scan_count)
+		len = st->get_ring_element(st, data);
+
+	  /* Guaranteed to be aligned with 8 byte boundary */
+	if (st->indio_dev->scan_timestamp)
+		*(s64 *)(((phys_addr_t)data + len
+				+ sizeof(s64) - 1) & ~(sizeof(s64) - 1))
+			= st->last_timestamp;
+	  st->indio_dev->ring->access.store_to(st->indio_dev->ring,
+					(u8 *)data,
+			st->last_timestamp);
+
+	iio_trigger_notify_done(st->indio_dev->trig);
+	kfree(data);
+
+	return;
+}
+EXPORT_SYMBOL(iio_sw_trigger_bh_to_ring);
+
+void iio_sw_poll_func_th(struct iio_dev *indio_dev, s64 time)
+{	struct iio_sw_ring_helper_state *h
+		= iio_dev_get_devdata(indio_dev);
+	h->last_timestamp = time;
+	schedule_work(&h->work_trigger_to_ring);
+}
+EXPORT_SYMBOL(iio_sw_poll_func_th);
+
 MODULE_DESCRIPTION("Industrialio I/O software ring buffer");
 MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/ring_sw.h b/drivers/staging/iio/ring_sw.h
index fd677f00836..61f1ed65039 100644
--- a/drivers/staging/iio/ring_sw.h
+++ b/drivers/staging/iio/ring_sw.h
@@ -207,10 +207,21 @@ struct iio_sw_ring_buffer {
 struct iio_ring_buffer *iio_sw_rb_allocate(struct iio_dev *indio_dev);
 void iio_sw_rb_free(struct iio_ring_buffer *ring);
 
+int iio_sw_ring_preenable(struct iio_dev *indio_dev);
 
+struct iio_sw_ring_helper_state {
+	struct work_struct		work_trigger_to_ring;
+	struct iio_dev			*indio_dev;
+	int (*get_ring_element)(struct iio_sw_ring_helper_state *st, u8 *buf);
+	s64				last_timestamp;
+};
+
+void iio_sw_poll_func_th(struct iio_dev *indio_dev, s64 time);
+void iio_sw_trigger_bh_to_ring(struct work_struct *work_s);
 
 #else /* CONFIG_IIO_RING_BUFFER*/
-static inline void iio_ring_sw_register_funcs(struct iio_ring_access_funcs *ra)
-{};
+struct iio_sw_ring_helper_state {
+	struct iio_dev			*indio_dev;
+};
 #endif /* !CONFIG_IIO_RING_BUFFER */
 #endif /* _IIO_RING_SW_H_ */
diff --git a/drivers/staging/iio/sysfs.h b/drivers/staging/iio/sysfs.h
index afcf5ab85f4..60834162eb3 100644
--- a/drivers/staging/iio/sysfs.h
+++ b/drivers/staging/iio/sysfs.h
@@ -284,6 +284,14 @@ struct iio_const_attr {
 	    .mask = _mask,						\
 	    .listel = &_ev_list };
 
+#define IIO_EVENT_ATTR_NAMED_SH(_vname, _name, _ev_list, _show, _store, _mask) \
+	static struct iio_event_attr					\
+	iio_event_attr_##_vname						\
+	= { .dev_attr = __ATTR(_name, S_IRUGO | S_IWUSR,		\
+			       _show, _store),				\
+	    .mask = _mask,						\
+	    .listel = &_ev_list };
+
 /**
  * IIO_EVENT_ATTR - non-shared event attribute
  * @_name: event name
@@ -293,10 +301,7 @@ struct iio_const_attr {
  * @_handler: handler function to be called
  **/
 #define IIO_EVENT_ATTR(_name, _show, _store, _mask, _handler)		\
-	static struct iio_event_handler_list				\
-	iio_event_##_name = {						\
-		.handler = _handler,					\
-	};								\
+	IIO_EVENT_SH(_name, _handler);					\
 	static struct							\
 	iio_event_attr							\
 	iio_event_attr_##_name						\
@@ -324,6 +329,7 @@ struct iio_const_attr {
 #define IIO_EVENT_CODE_GYRO_BASE	400
 #define IIO_EVENT_CODE_ADC_BASE		500
 #define IIO_EVENT_CODE_MISC_BASE	600
+#define IIO_EVENT_CODE_LIGHT_BASE	700
 
 #define IIO_EVENT_CODE_DEVICE_SPECIFIC	1000
 
diff --git a/drivers/staging/iio/trigger.h b/drivers/staging/iio/trigger.h
index 784e7b6fac1..4699586a593 100644
--- a/drivers/staging/iio/trigger.h
+++ b/drivers/staging/iio/trigger.h
@@ -8,10 +8,6 @@
  */
 #ifndef _IIO_TRIGGER_H_
 #define _IIO_TRIGGER_H_
-#define IIO_TRIGGER_NAME_LENGTH 20
-#define IIO_TRIGGER_ID_PREFIX "iio:trigger"
-#define IIO_TRIGGER_ID_FORMAT IIO_TRIGGER_ID_PREFIX "%d"
-
 
 /**
  * struct iio_trigger - industrial I/O trigger device
@@ -25,7 +21,6 @@
  * @pollfunc_list_lock:	[INTERN] protection of the polling function list
  * @pollfunc_list:	[INTERN] list of functions to run on trigger.
  * @control_attrs:	[DRIVER] sysfs attributes relevant to trigger type
- * @timestamp:		[INTERN] timestamp usesd by some trigs (e.g. datardy)
  * @owner:		[DRIVER] used to monitor usage count of the trigger.
  * @use_count:		use count for the trigger
  * @set_trigger_state:	[DRIVER] switch on/off the trigger on demand
@@ -43,7 +38,6 @@ struct iio_trigger {
 	spinlock_t			pollfunc_list_lock;
 	struct list_head		pollfunc_list;
 	const struct attribute_group	*control_attrs;
-	s64				timestamp;
 	struct module			*owner;
 	int use_count;
 
@@ -124,7 +118,7 @@ int iio_trigger_dettach_poll_func(struct iio_trigger *trig,
  *
  * Typically called in relevant hardware interrupt handler.
  **/
-void iio_trigger_poll(struct iio_trigger *trig);
+void iio_trigger_poll(struct iio_trigger *trig, s64 time);
 void iio_trigger_notify_done(struct iio_trigger *trig);
 
 /**
@@ -148,13 +142,27 @@ struct iio_poll_func {
 	struct				list_head list;
 	void				*private_data;
 	void (*poll_func_immediate)(struct iio_dev *indio_dev);
-	void (*poll_func_main)(struct iio_dev  *private_data);
+	void (*poll_func_main)(struct iio_dev *private_data, s64 time);
 
 };
 
+int iio_alloc_pollfunc(struct iio_dev *indio_dev,
+		       void (*immediate)(struct iio_dev *indio_dev),
+		       void (*main)(struct iio_dev *private_data, s64 time));
+
+/*
+ * Two functions for common case where all that happens is a pollfunc
+ * is attached and detached form a trigger
+ */
+int iio_triggered_ring_postenable(struct iio_dev *indio_dev);
+int iio_triggered_ring_predisable(struct iio_dev *indio_dev);
+
 struct iio_trigger *iio_allocate_trigger(void);
 
 void iio_free_trigger(struct iio_trigger *trig);
 
 
+struct iio_simple_trigger {
+	struct iio_trigger trig;
+};
 #endif /* _IIO_TRIGGER_H_ */
diff --git a/drivers/staging/iio/trigger/Makefile b/drivers/staging/iio/trigger/Makefile
index e5f96d2fe64..10aeca5e347 100644
--- a/drivers/staging/iio/trigger/Makefile
+++ b/drivers/staging/iio/trigger/Makefile
@@ -1,5 +1,6 @@
 #
 # Makefile for triggers not associated with iio-devices
 #
+
 obj-$(CONFIG_IIO_PERIODIC_RTC_TRIGGER) += iio-trig-periodic-rtc.o
-obj-$(CONFIG_IIO_GPIO_TRIGGER) += iio-trig-gpio.o
\ No newline at end of file
+obj-$(CONFIG_IIO_GPIO_TRIGGER) += iio-trig-gpio.o
diff --git a/drivers/staging/iio/trigger/iio-trig-gpio.c b/drivers/staging/iio/trigger/iio-trig-gpio.c
index 1da285d2863..f93cc916983 100644
--- a/drivers/staging/iio/trigger/iio-trig-gpio.c
+++ b/drivers/staging/iio/trigger/iio-trig-gpio.c
@@ -42,7 +42,8 @@ struct iio_gpio_trigger_info {
 
 static irqreturn_t iio_gpio_trigger_poll(int irq, void *private)
 {
-	iio_trigger_poll(private);
+	/* Timestamp not currently provided */
+	iio_trigger_poll(private, 0);
 	return IRQ_HANDLED;
 }
 
@@ -93,16 +94,11 @@ static int iio_gpio_trigger_probe(struct platform_device *pdev)
 			trig->private_data = trig_info;
 			trig_info->irq = irq;
 			trig->owner = THIS_MODULE;
-			trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH,
-					GFP_KERNEL);
-			if (!trig->name) {
+			trig->name = kasprintf(GFP_KERNEL, "irqtrig%d", irq);
+			if (trig->name == NULL) {
 				ret = -ENOMEM;
 				goto error_free_trig_info;
 			}
-			snprintf((char *)trig->name,
-				 IIO_TRIGGER_NAME_LENGTH,
-				 "irqtrig%d", irq);
-
 			ret = request_irq(irq, iio_gpio_trigger_poll,
 					  irqflags, trig->name, trig);
 			if (ret) {
diff --git a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
index 4ee3ae1ef89..b0b52f84edf 100644
--- a/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
+++ b/drivers/staging/iio/trigger/iio-trig-periodic-rtc.c
@@ -25,7 +25,6 @@ static DEFINE_MUTEX(iio_prtc_trigger_list_lock);
 struct iio_prtc_trigger_info {
 	struct rtc_device *rtc;
 	int frequency;
-	char *name;
 	struct rtc_task task;
 };
 
@@ -78,8 +77,7 @@ static ssize_t iio_trig_periodic_read_name(struct device *dev,
 					   char *buf)
 {
 	struct iio_trigger *trig = dev_get_drvdata(dev);
-	struct iio_prtc_trigger_info *trig_info = trig->private_data;
-	return sprintf(buf, "%s\n", trig_info->name);
+	return sprintf(buf, "%s\n", trig->name);
 }
 
 static DEVICE_ATTR(name, S_IRUGO,
@@ -100,7 +98,8 @@ static const struct attribute_group iio_trig_prtc_attr_group = {
 
 static void iio_prtc_trigger_poll(void *private_data)
 {
-	iio_trigger_poll(private_data);
+	/* Timestamp is not provided currently */
+	iio_trigger_poll(private_data, 0);
 }
 
 static int iio_trig_periodic_rtc_probe(struct platform_device *dev)
@@ -129,16 +128,12 @@ static int iio_trig_periodic_rtc_probe(struct platform_device *dev)
 		trig->private_data = trig_info;
 		trig->owner = THIS_MODULE;
 		trig->set_trigger_state = &iio_trig_periodic_rtc_set_state;
-		trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
+		trig->name = kasprintf(GFP_KERNEL, "periodic%s", pdata[i]);
 		if (trig->name == NULL) {
 			ret = -ENOMEM;
 			goto error_free_trig_info;
 		}
-		snprintf((char *)trig->name,
-			 IIO_TRIGGER_NAME_LENGTH,
-			 "periodic%s",
-			 pdata[i]);
-		trig_info->name = (char *)trig->name;
+
 		/* RTC access */
 		trig_info->rtc
 			= rtc_class_open(pdata[i]);
diff --git a/drivers/staging/line6/Kconfig b/drivers/staging/line6/Kconfig
index 7852d4a960c..bc1ffbed3c8 100644
--- a/drivers/staging/line6/Kconfig
+++ b/drivers/staging/line6/Kconfig
@@ -2,6 +2,7 @@ config LINE6_USB
 	tristate "Line6 USB support"
 	depends on USB && SND
 	select SND_RAWMIDI
+	select SND_PCM
 	help
 	  This is a driver for the guitar amp, cab, and effects modeller
 	  PODxt Pro by Line6 (and similar devices), supporting the
diff --git a/drivers/staging/line6/driver.c b/drivers/staging/line6/driver.c
index 1d5a4730276..27b986a50a0 100644
--- a/drivers/staging/line6/driver.c
+++ b/drivers/staging/line6/driver.c
@@ -679,8 +679,10 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 	usb_get_dev(usbdev);
 
 	/* we don't handle multiple configurations */
-	if (usbdev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
+	if (usbdev->descriptor.bNumConfigurations != 1) {
+		ret = -ENODEV;
+		goto err_put;
+	}
 
 	/* check vendor and product id */
 	for (devtype = ARRAY_SIZE(line6_id_table) - 1; devtype--;) {
@@ -692,16 +694,20 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 			break;
 	}
 
-	if (devtype < 0)
-		return -ENODEV;
+	if (devtype < 0) {
+		ret = -ENODEV;
+		goto err_put;
+	}
 
 	/* find free slot in device table: */
 	for (devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
 		if (line6_devices[devnum] == NULL)
 			break;
 
-	if (devnum == LINE6_MAX_DEVICES)
-		return -ENODEV;
+	if (devnum == LINE6_MAX_DEVICES) {
+		ret = -ENODEV;
+		goto err_put;
+	}
 
 	/* initialize device info: */
 	properties = &line6_properties_table[devtype];
@@ -762,13 +768,14 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
 	default:
 		MISSING_CASE;
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_put;
 	}
 
 	ret = usb_set_interface(usbdev, interface_number, alternate);
 	if (ret < 0) {
 		dev_err(&interface->dev, "set_interface failed\n");
-		return ret;
+		goto err_put;
 	}
 
 	/* initialize device data based on product id: */
@@ -815,7 +822,8 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 			break;
 
 		default:
-			return -ENODEV;
+			ret = -ENODEV;
+			goto err_put;
 		}
 		break;
 
@@ -827,19 +835,22 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
 	default:
 		MISSING_CASE;
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_put;
 	}
 
 	if (size == 0) {
 		dev_err(line6->ifcdev, "driver bug: interface data size not set\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_put;
 	}
 
 	line6 = kzalloc(size, GFP_KERNEL);
 
 	if (line6 == NULL) {
 		dev_err(&interface->dev, "Out of memory\n");
-		return -ENOMEM;
+		ret = -ENODEV;
+		goto err_put;
 	}
 
 	/* store basic data: */
@@ -875,16 +886,16 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
 		if (line6->buffer_listen == NULL) {
 			dev_err(&interface->dev, "Out of memory\n");
-			line6_destruct(interface);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_destruct;
 		}
 
 		line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
 
 		if (line6->buffer_message == NULL) {
 			dev_err(&interface->dev, "Out of memory\n");
-			line6_destruct(interface);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_destruct;
 		}
 
 		line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
@@ -892,15 +903,15 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 		if (line6->urb_listen == NULL) {
 			dev_err(&interface->dev, "Out of memory\n");
 			line6_destruct(interface);
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto err_destruct;
 		}
 
 		ret = line6_start_listen(line6);
 		if (ret < 0) {
 			dev_err(&interface->dev, "%s: usb_submit_urb failed\n",
 				__func__);
-			line6_destruct(interface);
-			return ret;
+			goto err_destruct;
 		}
 	}
 
@@ -952,22 +963,25 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 		ret = -ENODEV;
 	}
 
-	if (ret < 0) {
-		line6_destruct(interface);
-		return ret;
-	}
+	if (ret < 0)
+		goto err_destruct;
 
 	ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj,
 				"usb_device");
-	if (ret < 0) {
-		line6_destruct(interface);
-		return ret;
-	}
+	if (ret < 0)
+		goto err_destruct;
 
 	dev_info(&interface->dev, "Line6 %s now attached\n",
 		 line6->properties->name);
 	line6_devices[devnum] = line6;
 	line6_list_devices();
+	return 0;
+
+err_destruct:
+	line6_destruct(interface);
+err_put:
+	usb_put_intf(interface);
+	usb_put_dev(usbdev);
 	return ret;
 }
 
diff --git a/drivers/staging/memrar/TODO b/drivers/staging/memrar/TODO
index 0087447d503..435e09ba44c 100644
--- a/drivers/staging/memrar/TODO
+++ b/drivers/staging/memrar/TODO
@@ -1,7 +1,7 @@
 RAR Handler (memrar) Driver TODO Items
 ======================================
 
-Maintainer: Ossama Othman <ossama.othman@intel.com>
+Maintainer: Eugene Epshteyn <eugene.epshteyn@intel.com>
 
 memrar.h
 --------
diff --git a/drivers/staging/memrar/memrar-abi b/drivers/staging/memrar/memrar-abi
index 98a6bb158ba..c23fc996a43 100644
--- a/drivers/staging/memrar/memrar-abi
+++ b/drivers/staging/memrar/memrar-abi
@@ -1,7 +1,7 @@
 What:		/dev/memrar
 Date:		March 2010
-KernelVersion:	Kernel version this feature first showed up in.
-Contact:	Ossama Othman <ossama.othman@intel.com>
+KernelVersion:	2.6.34
+Contact:	Eugene Epshteyn <eugene.epshteyn@intel.com>
 Description:	The Intel Moorestown Restricted Access Region (RAR)
 		Handler driver exposes an ioctl() based interface that
 		allows a user to reserve and release blocks of RAR
diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c
index 41876f2b0e5..a98b3f1f11e 100644
--- a/drivers/staging/memrar/memrar_handler.c
+++ b/drivers/staging/memrar/memrar_handler.c
@@ -278,19 +278,10 @@ static int memrar_init_rar_resources(int rarnum, char const *devname)
 	BUG_ON(!memrar_is_valid_rar_type(rarnum));
 	BUG_ON(rar->allocated);
 
-	mutex_init(&rar->lock);
-
-	/*
-	 * Initialize the process table before we reach any
-	 * code that exit on failure since the finalization
-	 * code requires an initialized list.
-	 */
-	INIT_LIST_HEAD(&rar->buffers.list);
-
 	if (rar_get_address(rarnum, &low, &high) != 0)
 		/* No RAR is available. */
 		return -ENODEV;
-	
+
 	if (low == 0 || high == 0) {
 		rar->base      = 0;
 		rar->length    = 0;
@@ -310,7 +301,8 @@ static int memrar_init_rar_resources(int rarnum, char const *devname)
 	/* Claim RAR memory as our own. */
 	if (request_mem_region(low, rar->length, devname) == NULL) {
 		rar->length = 0;
-		pr_err("%s: Unable to claim RAR[%d] memory.\n", devname, rarnum);
+		pr_err("%s: Unable to claim RAR[%d] memory.\n",
+		       devname, rarnum);
 		pr_err("%s: RAR[%d] disabled.\n", devname, rarnum);
 		return -EBUSY;
 	}
@@ -346,7 +338,7 @@ static int memrar_init_rar_resources(int rarnum, char const *devname)
 	}
 
 	pr_info("%s: BRAR[%d] bus address range = [0x%lx, 0x%lx]\n",
-			devname, rarnum, (unsigned long) low, (unsigned long) high);
+		devname, rarnum, (unsigned long) low, (unsigned long) high);
 
 	pr_info("%s: BRAR[%d] size = %zu KiB\n",
 			devname, rarnum, rar->allocator->capacity / 1024);
@@ -530,7 +522,7 @@ static long memrar_get_stat(struct RAR_stat *r)
 {
 	struct memrar_allocator *allocator;
 
- 	if (!memrar_is_valid_rar_type(r->type))
+	if (!memrar_is_valid_rar_type(r->type))
 		return -EINVAL;
 
 	if (!memrars[r->type].allocated)
@@ -939,9 +931,28 @@ static int memrar_registration_callback(unsigned long rar)
 static int __init memrar_init(void)
 {
 	int err;
+	int i;
 
 	printk(banner);
 
+	/*
+	 * Some delayed initialization is performed in this driver.
+	 * Make sure resources that are used during driver clean-up
+	 * (e.g. during driver's release() function) are fully
+	 * initialized before first use.  This is particularly
+	 * important for the case when the delayed initialization
+	 * isn't completed, leaving behind a partially initialized
+	 * driver.
+	 *
+	 * Such a scenario can occur when RAR is not available on the
+	 * platform, and the driver is release()d.
+	 */
+	for (i = 0; i != ARRAY_SIZE(memrars); ++i) {
+		struct memrar_rar_info * const rar = &memrars[i];
+		mutex_init(&rar->lock);
+		INIT_LIST_HEAD(&rar->buffers.list);
+	}
+
 	err = misc_register(&memrar_miscdev);
 	if (err)
 		return err;
diff --git a/drivers/staging/msm/Kconfig b/drivers/staging/msm/Kconfig
index c57039f2060..c5309eec58f 100644
--- a/drivers/staging/msm/Kconfig
+++ b/drivers/staging/msm/Kconfig
@@ -46,21 +46,11 @@ config FB_MSM_LCDC_PRISM_WVGA
 	select FB_MSM_LCDC_PANEL
 	default n
 
-config FB_MSM_LCDC_ST1_WXGA
-	bool
-	select FB_MSM_LCDC_PANEL
-	default n
-
 config FB_MSM_LCDC_ST15_WXGA
         bool
         select FB_MSM_LCDC_PANEL
         default n
 
-config FB_MSM_LCDC_WXGA
-	bool
-	select FB_MSM_LCDC_PANEL
-	default n
-
 choice
 	prompt "LCD Panel"
 	default FB_MSM_LCDC_ST15_PANEL
diff --git a/drivers/staging/msm/Makefile b/drivers/staging/msm/Makefile
index 98a0ce177cb..bb3606faf20 100644
--- a/drivers/staging/msm/Makefile
+++ b/drivers/staging/msm/Makefile
@@ -61,14 +61,12 @@ obj-y += mddi_prism.o
 obj-y += mddi_toshiba.o
 obj-y += mddi_toshiba_vga.o
 obj-y += mddi_toshiba_wvga_pt.o
-obj-y += mddi_toshiba_wvga.o
 obj-y += mddi_sharp.o
 else
 obj-$(CONFIG_FB_MSM_MDDI_PRISM_WVGA) += mddi_prism.o
 obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON) += mddi_toshiba.o
 obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_COMMON_VGA) += mddi_toshiba_vga.o
 obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA_PORTRAIT) += mddi_toshiba_wvga_pt.o
-obj-$(CONFIG_FB_MSM_MDDI_TOSHIBA_WVGA) += mddi_toshiba_wvga.o
 obj-$(CONFIG_FB_MSM_MDDI_SHARP_QVGA_128x128) += mddi_sharp.o
 endif
 
@@ -76,11 +74,8 @@ obj-$(CONFIG_FB_MSM_LCDC_PANEL) += lcdc_panel.o
 obj-$(CONFIG_FB_MSM_LCDC_PRISM_WVGA) += lcdc_prism.o
 obj-$(CONFIG_FB_MSM_LCDC_EXTERNAL_WXGA) += lcdc_external.o
 obj-$(CONFIG_FB_MSM_LCDC_GORDON_VGA) += lcdc_gordon.o
-obj-$(CONFIG_FB_MSM_LCDC_WXGA) += lcdc_wxga.o
 obj-$(CONFIG_FB_MSM_LCDC_TOSHIBA_WVGA_PT) += lcdc_toshiba_wvga_pt.o
 obj-$(CONFIG_FB_MSM_LCDC_SHARP_WVGA_PT) += lcdc_sharp_wvga_pt.o
-obj-$(CONFIG_FB_MSM_LCDC_GRAPEFRUIT_VGA) += lcdc_grapefruit.o
-obj-$(CONFIG_FB_MSM_LCDC_ST1_WXGA) += lcdc_st1_wxga.o
 obj-$(CONFIG_FB_MSM_LCDC_ST15_WXGA) += lcdc_st15.o
 obj-$(CONFIG_FB_MSM_HDMI_SII_EXTERNAL_720P) += hdmi_sii9022.o
 
diff --git a/drivers/staging/msm/lcdc_grapefruit.c b/drivers/staging/msm/lcdc_grapefruit.c
deleted file mode 100644
index 7284649ea0a..00000000000
--- a/drivers/staging/msm/lcdc_grapefruit.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include "msm_fb.h"
-
-#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
-#include "mddihosti.h"
-#endif
-
-static int __init lcdc_grapefruit_init(void)
-{
-	int ret;
-	struct msm_panel_info pinfo;
-
-#ifdef CONFIG_FB_MSM_TRY_MDDI_CATCH_LCDC_PRISM
-	if (msm_fb_detect_client("lcdc_grapefruit_vga"))
-		return 0;
-#endif
-
-	pinfo.xres = 1024;
-	pinfo.yres = 600;
-	pinfo.type = LCDC_PANEL;
-	pinfo.pdest = DISPLAY_1;
-	pinfo.wait_cycle = 0;
-	pinfo.bpp = 18;
-	pinfo.fb_num = 2;
-	pinfo.clk_rate = 40000000;
-
-	pinfo.lcdc.h_back_porch = 88;
-	pinfo.lcdc.h_front_porch = 40;
-	pinfo.lcdc.h_pulse_width = 128;
-	pinfo.lcdc.v_back_porch = 23;
-	pinfo.lcdc.v_front_porch = 1;
-	pinfo.lcdc.v_pulse_width = 4;
-	pinfo.lcdc.border_clr = 0;	/* blk */
-	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
-	pinfo.lcdc.hsync_skew = 0;
-
-	ret = lcdc_device_register(&pinfo);
-	if (ret)
-		printk(KERN_ERR "%s: failed to register device!\n", __func__);
-
-	return ret;
-}
-
-module_init(lcdc_grapefruit_init);
diff --git a/drivers/staging/msm/lcdc_st1_wxga.c b/drivers/staging/msm/lcdc_st1_wxga.c
deleted file mode 100644
index 73760019cf2..00000000000
--- a/drivers/staging/msm/lcdc_st1_wxga.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include "msm_fb.h"
-
-static int __init lcdc_st1_wxga_init(void)
-{
-	int ret;
-	struct msm_panel_info pinfo;
-
-	if (msm_fb_detect_client("lcdc_st1_wxga"))
-		return 0;
-
-	pinfo.xres = 1280;
-	pinfo.yres = 720;
-	pinfo.type = LCDC_PANEL;
-	pinfo.pdest = DISPLAY_1;
-	pinfo.wait_cycle = 0;
-	pinfo.bpp = 18;
-	pinfo.fb_num = 2;
-	pinfo.clk_rate = 74250000;
-
-	pinfo.lcdc.h_back_porch = 124;
-	pinfo.lcdc.h_front_porch = 110;
-	pinfo.lcdc.h_pulse_width = 136;
-	pinfo.lcdc.v_back_porch = 19;
-	pinfo.lcdc.v_front_porch = 5;
-	pinfo.lcdc.v_pulse_width = 6;
-	pinfo.lcdc.border_clr = 0;	/* blk */
-	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
-	pinfo.lcdc.hsync_skew = 0;
-
-	ret = lcdc_device_register(&pinfo);
-	if (ret)
-		printk(KERN_ERR "%s: failed to register device!\n", __func__);
-
-	return ret;
-}
-
-module_init(lcdc_st1_wxga_init);
diff --git a/drivers/staging/msm/lcdc_wxga.c b/drivers/staging/msm/lcdc_wxga.c
deleted file mode 100644
index 202c92c0ef5..00000000000
--- a/drivers/staging/msm/lcdc_wxga.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include "msm_fb.h"
-
-static int __init lcdc_wxga_init(void)
-{
-	int ret;
-	struct msm_panel_info pinfo;
-
-#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
-	if (msm_fb_detect_client("lcdc_wxga"))
-		return 0;
-#endif
-
-	pinfo.xres = 1280;
-	pinfo.yres = 720;
-	pinfo.type = LCDC_PANEL;
-	pinfo.pdest = DISPLAY_1;
-	pinfo.wait_cycle = 0;
-	pinfo.bpp = 24;
-	pinfo.fb_num = 2;
-	pinfo.clk_rate = 74250000;
-
-	pinfo.lcdc.h_back_porch = 124;
-	pinfo.lcdc.h_front_porch = 110;
-	pinfo.lcdc.h_pulse_width = 136;
-	pinfo.lcdc.v_back_porch = 19;
-	pinfo.lcdc.v_front_porch = 5;
-	pinfo.lcdc.v_pulse_width = 6;
-	pinfo.lcdc.border_clr = 0;	/* blk */
-	pinfo.lcdc.underflow_clr = 0xff;	/* blue */
-	pinfo.lcdc.hsync_skew = 0;
-
-	ret = lcdc_device_register(&pinfo);
-	if (ret)
-		printk(KERN_ERR "%s: failed to register device!\n", __func__);
-
-	return ret;
-}
-
-module_init(lcdc_wxga_init);
diff --git a/drivers/staging/msm/mddi_toshiba_wvga.c b/drivers/staging/msm/mddi_toshiba_wvga.c
deleted file mode 100644
index 557b0f08faf..00000000000
--- a/drivers/staging/msm/mddi_toshiba_wvga.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include "msm_fb.h"
-#include "mddihost.h"
-#include "mddi_toshiba.h"
-
-static int __init mddi_toshiba_wvga_init(void)
-{
-	int ret;
-	struct msm_panel_info pinfo;
-
-#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
-	if (msm_fb_detect_client("mddi_toshiba_wvga"))
-		return 0;
-#endif
-
-	pinfo.xres = 800;
-	pinfo.yres = 480;
-	pinfo.pdest = DISPLAY_2;
-	pinfo.type = MDDI_PANEL;
-	pinfo.mddi.vdopkt = MDDI_DEFAULT_PRIM_PIX_ATTR;
-	pinfo.wait_cycle = 0;
-	pinfo.bpp = 18;
-	pinfo.lcd.vsync_enable = TRUE;
-	pinfo.lcd.refx100 = 6118;
-	pinfo.lcd.v_back_porch = 6;
-	pinfo.lcd.v_front_porch = 0;
-	pinfo.lcd.v_pulse_width = 0;
-	pinfo.lcd.hw_vsync_mode = FALSE;
-	pinfo.lcd.vsync_notifier_period = (1 * HZ);
-	pinfo.bl_max = 4;
-	pinfo.bl_min = 1;
-	pinfo.clk_rate = 192000000;
-	pinfo.clk_min =  190000000;
-	pinfo.clk_max =  200000000;
-	pinfo.fb_num = 2;
-
-	ret = mddi_toshiba_device_register(&pinfo, TOSHIBA_VGA_PRIM,
-					   LCD_TOSHIBA_2P4_WVGA);
-	if (ret) {
-		printk(KERN_ERR "%s: failed to register device!\n", __func__);
-		return ret;
-	}
-
-	return ret;
-}
-
-module_init(mddi_toshiba_wvga_init);
diff --git a/drivers/staging/msm/mddihost.h b/drivers/staging/msm/mddihost.h
index 20b817841c4..c46f24aea25 100644
--- a/drivers/staging/msm/mddihost.h
+++ b/drivers/staging/msm/mddihost.h
@@ -44,8 +44,6 @@
 
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
 
 #include "msm_fb_panel.h"
 
diff --git a/drivers/staging/msm/mdp4_debugfs.c b/drivers/staging/msm/mdp4_debugfs.c
index 844d46775ec..36954e89478 100644
--- a/drivers/staging/msm/mdp4_debugfs.c
+++ b/drivers/staging/msm/mdp4_debugfs.c
@@ -63,13 +63,6 @@ DEFINE_SIMPLE_ATTRIBUTE(
 			"%llx\n");
 
 
-static int mdp4_debugfs_open(struct inode *inode, struct file *file)
-{
-	/* non-seekable */
-	file->f_mode &= ~(FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE);
-	return 0;
-}
-
 static int mdp4_debugfs_release(struct inode *inode, struct file *file)
 {
 	return 0;
@@ -144,10 +137,11 @@ static ssize_t mdp4_debugfs_read(
 }
 
 static const struct file_operations mdp4_debugfs_fops = {
-	.open = mdp4_debugfs_open,
+	.open = nonseekable_open,
 	.release = mdp4_debugfs_release,
 	.read = mdp4_debugfs_read,
 	.write = mdp4_debugfs_write,
+	.llseek = no_llseek,
 };
 
 int mdp4_debugfs_init(void)
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
index 304bb829763..de284c28faa 100644
--- a/drivers/staging/msm/mdp4_overlay.c
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -874,8 +874,8 @@ struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void)
 		if (pipe->pipe_ndx == 0) {
 			pipe->pipe_ndx = i + 1;	/* start from 1 */
 			init_completion(&pipe->comp);
-	printk(KERN_INFO "mdp4_overlay_pipe_alloc: pipe=%x ndx=%d\n",
-					(int)pipe, pipe->pipe_ndx);
+	printk(KERN_INFO "mdp4_overlay_pipe_alloc: pipe=%p ndx=%d\n",
+					pipe, pipe->pipe_ndx);
 			return pipe;
 		}
 		pipe++;
@@ -887,8 +887,8 @@ struct mdp4_overlay_pipe *mdp4_overlay_pipe_alloc(void)
 
 void mdp4_overlay_pipe_free(struct mdp4_overlay_pipe *pipe)
 {
-	printk(KERN_INFO "mdp4_overlay_pipe_free: pipe=%x ndx=%d\n",
-					(int)pipe, pipe->pipe_ndx);
+	printk(KERN_INFO "mdp4_overlay_pipe_free: pipe=%p ndx=%d\n",
+					pipe, pipe->pipe_ndx);
 	memset(pipe, 0, sizeof(*pipe));
 }
 
diff --git a/drivers/staging/msm/msm_fb_def.h b/drivers/staging/msm/msm_fb_def.h
index 6de44093742..c5f9e9e670f 100644
--- a/drivers/staging/msm/msm_fb_def.h
+++ b/drivers/staging/msm/msm_fb_def.h
@@ -50,15 +50,11 @@
 #include <linux/debugfs.h>
 #include <linux/console.h>
 
-#include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/time.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include "linux/proc_fs.h"
 #include <mach/hardware.h>
 #include <linux/io.h>
-#include <linux/fb.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 #include <linux/platform_device.h>
diff --git a/drivers/staging/msm/staging-devices.c b/drivers/staging/msm/staging-devices.c
index 0f8ec3e2601..861f3307231 100644
--- a/drivers/staging/msm/staging-devices.c
+++ b/drivers/staging/msm/staging-devices.c
@@ -18,7 +18,6 @@
 #include "msm_mdp.h"
 #include "memory_ll.h"
 //#include "android_pmem.h"
-#include <mach/board.h>
 
 #ifdef CONFIG_MSM_SOC_REV_A
 #define MSM_SMI_BASE 0xE0000000
@@ -115,17 +114,7 @@ static int msm_fb_detect_panel(const char *name)
 	} else if ((machine_is_qsd8x50_surf() || machine_is_qsd8x50a_surf())
 			&& !strcmp(name, "lcdc_external"))
 		ret = 0;
-	else if (0 /*machine_is_qsd8x50_grapefruit() */) {
-		if (!strcmp(name, "lcdc_grapefruit_vga"))
-			ret = 0;
-		else
-			ret = -ENODEV;
-	} else if (machine_is_qsd8x50_st1()) {
-		if (!strcmp(name, "lcdc_st1_wxga"))
-			ret = 0;
-		else
-			ret = -ENODEV;
-	} else if (machine_is_qsd8x50a_st1_5()) {
+	else if (machine_is_qsd8x50a_st1_5()) {
 		if (!strcmp(name, "lcdc_st15") ||
 		    !strcmp(name, "hdmi_sii9022"))
 			ret = 0;
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c
index 976227b0127..e9809d37516 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.c
+++ b/drivers/staging/octeon/cvmx-cmd-queue.c
@@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id,
 	if (qstate->base_ptr_div128) {
 		if (max_depth != (int)qstate->max_depth) {
 			cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
-				"Queue already initalized with different "
+				"Queue already initialized with different "
 				"max_depth (%d).\n",
 			     (int)qstate->max_depth);
 			return CVMX_CMD_QUEUE_INVALID_PARAM;
 		}
 		if (fpa_pool != qstate->fpa_pool) {
 			cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
-				"Queue already initalized with different "
+				"Queue already initialized with different "
 				"FPA pool (%u).\n",
 			     qstate->fpa_pool);
 			return CVMX_CMD_QUEUE_INVALID_PARAM;
 		}
 		if ((pool_size >> 3) - 1 != qstate->pool_size_m1) {
 			cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: "
-				"Queue already initalized with different "
+				"Queue already initialized with different "
 				"FPA pool size (%u).\n",
 			     (qstate->pool_size_m1 + 1) << 3);
 			return CVMX_CMD_QUEUE_INVALID_PARAM;
diff --git a/drivers/staging/octeon/cvmx-fau.h b/drivers/staging/octeon/cvmx-fau.h
index 29bdce66cdf..a6939fc8ba1 100644
--- a/drivers/staging/octeon/cvmx-fau.h
+++ b/drivers/staging/octeon/cvmx-fau.h
@@ -299,7 +299,7 @@ cvmx_fau_tagwait_fetch_and_add8(cvmx_fau_reg_8_t reg, int8_t value)
 /**
  * Builds I/O data for async operations
  *
- * @scraddr: Scratch pad byte addres to write to.  Must be 8 byte aligned
+ * @scraddr: Scratch pad byte address to write to.  Must be 8 byte aligned
  * @value:   Signed value to add.
  *                Note: When performing 32 and 64 bit access, only the low
  *                22 bits are available.
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index b58b8971f93..97082542188 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -294,6 +294,8 @@ int cvm_oct_spi_init(struct net_device *dev)
 	if (number_spi_ports == 0) {
 		r = request_irq(OCTEON_IRQ_RML, cvm_oct_spi_rml_interrupt,
 				IRQF_SHARED, "SPI", &number_spi_ports);
+		if (r)
+			return r;
 	}
 	number_spi_ports++;
 
diff --git a/drivers/staging/otus/80211core/ctxrx.c b/drivers/staging/otus/80211core/ctxrx.c
index a127196260e..135167d23d0 100644
--- a/drivers/staging/otus/80211core/ctxrx.c
+++ b/drivers/staging/otus/80211core/ctxrx.c
@@ -3117,7 +3117,7 @@ u16_t zfWlanRxFilter(zdev_t* dev, zbuf_t* buf)
 
     index = (src[2]+up) & (ZM_FILTER_TABLE_ROW-1);
 
-    /* TBD : filter frame with source address == own MAC adress */
+    /* TBD : filter frame with source address == own MAC address */
     if ((wd->macAddr[0] == src[0]) && (wd->macAddr[1] == src[1])
             && (wd->macAddr[2] == src[2]))
     {
diff --git a/drivers/staging/otus/TODO b/drivers/staging/otus/TODO
index 4caf026a491..6fea974fcc9 100644
--- a/drivers/staging/otus/TODO
+++ b/drivers/staging/otus/TODO
@@ -2,15 +2,7 @@ I'm hesitant to add a TODO file here, as the wireless developers would
 really have people help them out on the "clean" ar9170 driver that can
 be found at the linux-wireless developer site.
 
-But, if you wish to clean up this driver instead, here's a short list of
-things that need to be done to get it into a more mergable shape:
-
-TODO:
-	- checkpatch.pl cleanups
-	- sparse cleanups
-	- port to in-kernel 80211 stack
-	- review by the wireless developer community
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Luis Rodriguez <Luis.Rodriguez@Atheros.com> and the
-otus-devel@lists.madwifi-project.org mailing list.
+This driver is unmaintained and its only purpose is as a
+source of documentation for developers working on ar9170 and carl9170.
+Once carl9170 gets 11n support and merged upstream then this driver
+can be removed.
diff --git a/drivers/staging/otus/apdbg.c b/drivers/staging/otus/apdbg.c
index b59028e7e33..09415a6b93c 100644
--- a/drivers/staging/otus/apdbg.c
+++ b/drivers/staging/otus/apdbg.c
@@ -90,28 +90,6 @@ struct zdap_ioctl {
 
 #endif
 
-static char hex(char v)
-{
-	if (isdigit(v))
-		return v - '0';
-	else if (isxdigit(v))
-		return tolower(v) - 'a' + 10;
-	else
-		return 0;
-}
-
-static unsigned char asctohex(char *str)
-{
-	unsigned char value;
-
-	value = hex(*str) & 0x0f;
-	value = value << 4;
-	str++;
-	value |= hex(*str) & 0x0f;
-
-	return value;
-}
-
 char *prgname;
 
 int set_ioctl(int sock, struct ifreq *req)
@@ -180,7 +158,7 @@ int main(int argc, char **argv)
 	if (argc < 3) {
 		fprintf(stderr, "%s: usage is \"%s <ifname> <operation>"
 				"[<address>] [<value>]\"\n", prgname, prgname);
-		fprintf(stderr, "valid operation : read, write, mem, reg, \n");
+		fprintf(stderr, "valid operation : read, write, mem, reg,\n");
 		fprintf(stderr, "		: txd, rxd, rmem, wmem\n");
 		fprintf(stderr, "		: dmat, regt, test\n");
 
diff --git a/drivers/staging/otus/hal/hpani.c b/drivers/staging/otus/hal/hpani.c
index f53e483b394..9b9420c75d4 100644
--- a/drivers/staging/otus/hal/hpani.c
+++ b/drivers/staging/otus/hal/hpani.c
@@ -72,7 +72,6 @@ s32_t BEACON_RSSI(zdev_t *dev)
 
 void zfHpAniAttach(zdev_t *dev)
 {
-#define N(a)     (sizeof(a) / sizeof(a[0]))
     u32_t i;
     struct zsHpPriv *HpPriv;
 
@@ -125,7 +124,6 @@ void zfHpAniAttach(zdev_t *dev)
     HpPriv->stats.ast_nodestats.ns_avgbrssi = ZM_RSSI_DUMMY_MARKER;
     HpPriv->stats.ast_nodestats.ns_avgrssi = ZM_RSSI_DUMMY_MARKER;
     HpPriv->stats.ast_nodestats.ns_avgtxrssi = ZM_RSSI_DUMMY_MARKER;
-#undef N
 }
 
 /*
@@ -133,7 +131,6 @@ void zfHpAniAttach(zdev_t *dev)
  */
 u8_t zfHpAniControl(zdev_t *dev, ZM_HAL_ANI_CMD cmd, int param)
 {
-#define N(a) (sizeof(a)/sizeof(a[0]))
     typedef s32_t TABLE[];
     struct zsHpPriv *HpPriv;
     struct zsAniState *aniState;
@@ -148,9 +145,9 @@ u8_t zfHpAniControl(zdev_t *dev, ZM_HAL_ANI_CMD cmd, int param)
     {
         u32_t level = param;
 
-        if (level >= N(HpPriv->totalSizeDesired)) {
+        if (level >= ARRAY_SIZE(HpPriv->totalSizeDesired)) {
           zm_debug_msg1("level out of range, desired level : ", level);
-          zm_debug_msg1("max level : ", N(HpPriv->totalSizeDesired));
+          zm_debug_msg1("max level : ", ARRAY_SIZE(HpPriv->totalSizeDesired));
           return FALSE;
         }
 
@@ -260,10 +257,10 @@ u8_t zfHpAniControl(zdev_t *dev, ZM_HAL_ANI_CMD cmd, int param)
         const TABLE firstep = { 0, 4, 8 };
         u32_t level = param;
 
-        if (level >= N(firstep))
+        if (level >= ARRAY_SIZE(firstep))
         {
             zm_debug_msg1("level out of range, desired level : ", level);
-            zm_debug_msg1("max level : ", N(firstep));
+            zm_debug_msg1("max level : ", ARRAY_SIZE(firstep));
             return FALSE;
         }
         zfDelayWriteInternalReg(dev, AR_PHY_FIND_SIG,
@@ -283,10 +280,10 @@ u8_t zfHpAniControl(zdev_t *dev, ZM_HAL_ANI_CMD cmd, int param)
         const TABLE cycpwrThr1 = { 2, 4, 6, 8, 10, 12, 14, 16 };
         u32_t level = param;
 
-        if (level >= N(cycpwrThr1))
+        if (level >= ARRAY_SIZE(cycpwrThr1))
         {
             zm_debug_msg1("level out of range, desired level : ", level);
-            zm_debug_msg1("max level : ", N(cycpwrThr1));
+            zm_debug_msg1("max level : ", ARRAY_SIZE(cycpwrThr1));
             return FALSE;
         }
         zfDelayWriteInternalReg(dev, AR_PHY_TIMING5,
@@ -335,7 +332,6 @@ u8_t zfHpAniControl(zdev_t *dev, ZM_HAL_ANI_CMD cmd, int param)
         return FALSE;
     }
     return TRUE;
-#undef  N
 }
 
 void zfHpAniRestart(zdev_t* dev)
diff --git a/drivers/staging/otus/hal/hpmain.c b/drivers/staging/otus/hal/hpmain.c
index 5f412e02045..6d2d358d5ca 100644
--- a/drivers/staging/otus/hal/hpmain.c
+++ b/drivers/staging/otus/hal/hpmain.c
@@ -430,7 +430,7 @@ void zfInitPhy(zdev_t* dev,  u32_t frequency, u8_t bw40)
      * Register setting by mode
      */
 
-    entries = sizeof(ar5416Modes) / sizeof(*ar5416Modes);
+    entries = ARRAY_SIZE(ar5416Modes);
     zm_msg1_scan(ZM_LV_2, "Modes register setting entries=", entries);
     for (i=0; i<entries; i++)
     {
@@ -496,7 +496,7 @@ void zfInitPhy(zdev_t* dev,  u32_t frequency, u8_t bw40)
     /*
      * Common Register setting
      */
-    entries = sizeof(ar5416Common) / sizeof(*ar5416Common);
+    entries = ARRAY_SIZE(ar5416Common);
     for (i=0; i<entries; i++)
     {
         reg_write(ar5416Common[i][0], ar5416Common[i][1]);
@@ -506,7 +506,7 @@ void zfInitPhy(zdev_t* dev,  u32_t frequency, u8_t bw40)
     /*
      * RF Gain setting by freqIndex
      */
-    entries = sizeof(ar5416BB_RfGain) / sizeof(*ar5416BB_RfGain);
+    entries = ARRAY_SIZE(ar5416BB_RfGain);
     for (i=0; i<entries; i++)
     {
         reg_write(ar5416BB_RfGain[i][0], ar5416BB_RfGain[i][freqIndex]);
@@ -963,7 +963,6 @@ u32_t reverse_bits(u32_t chan_sel)
 /* Bank 0 1 2 3 5 6 7 */
 void zfSetRfRegs(zdev_t* dev, u32_t frequency)
 {
-    u16_t entries;
     u16_t freqIndex = 0;
     u16_t i;
 
@@ -984,33 +983,28 @@ void zfSetRfRegs(zdev_t* dev, u32_t frequency)
     }
 
 #if 1
-    entries = sizeof(otusBank) / sizeof(*otusBank);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(otusBank); i++)
     {
         reg_write(otusBank[i][0], otusBank[i][freqIndex]);
     }
 #else
     /* Bank0 */
-    entries = sizeof(ar5416Bank0) / sizeof(*ar5416Bank0);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank0); i++)
     {
         reg_write(ar5416Bank0[i][0], ar5416Bank0[i][1]);
     }
     /* Bank1 */
-    entries = sizeof(ar5416Bank1) / sizeof(*ar5416Bank1);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank1); i++)
     {
         reg_write(ar5416Bank1[i][0], ar5416Bank1[i][1]);
     }
     /* Bank2 */
-    entries = sizeof(ar5416Bank2) / sizeof(*ar5416Bank2);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank2); i++)
     {
         reg_write(ar5416Bank2[i][0], ar5416Bank2[i][1]);
     }
     /* Bank3 */
-    entries = sizeof(ar5416Bank3) / sizeof(*ar5416Bank3);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank3); i++)
     {
         reg_write(ar5416Bank3[i][0], ar5416Bank3[i][freqIndex]);
     }
@@ -1018,14 +1012,12 @@ void zfSetRfRegs(zdev_t* dev, u32_t frequency)
     reg_write (0x98b0,  0x00000013);
     reg_write (0x98e4,  0x00000002);
     /* Bank6 */
-    entries = sizeof(ar5416Bank6) / sizeof(*ar5416Bank6);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank6); i++)
     {
         reg_write(ar5416Bank6[i][0], ar5416Bank6[i][freqIndex]);
     }
     /* Bank7 */
-    entries = sizeof(ar5416Bank7) / sizeof(*ar5416Bank7);
-    for (i=0; i<entries; i++)
+    for (i=0; i<ARRAY_SIZE(ar5416Bank7); i++)
     {
         reg_write(ar5416Bank7[i][0], ar5416Bank7[i][1]);
     }
diff --git a/drivers/staging/otus/hal/hpreg.c b/drivers/staging/otus/hal/hpreg.c
index da3b7743387..9b04653c1c5 100644
--- a/drivers/staging/otus/hal/hpreg.c
+++ b/drivers/staging/otus/hal/hpreg.c
@@ -29,9 +29,6 @@
 #include "hpreg.h"
 #include "hpusb.h"
 
-/* used throughout this file... */
-#define	N(a)	(sizeof(a) / sizeof(a[0]))
-
 #define HAL_MODE_11A_TURBO	HAL_MODE_108A
 #define HAL_MODE_11G_TURBO	HAL_MODE_108G
 
@@ -1557,7 +1554,7 @@ u8_t GetWmRD(u16_t regionCode, u16_t channelFlag, REG_DOMAIN *rd)
 	u64_t flags = NO_REQ;
 	REG_DMN_PAIR_MAPPING *regPair = NULL;
 
-	for (i = 0, found = 0; (i < N(regDomainPairs)) && (!found); i++) {
+	for (i = 0, found = 0; (i < ARRAY_SIZE(regDomainPairs)) && (!found); i++) {
 		if (regDomainPairs[i].regDmnEnum == regionCode) {
 			regPair = &regDomainPairs[i];
 			found = 1;
@@ -1581,7 +1578,7 @@ u8_t GetWmRD(u16_t regionCode, u16_t channelFlag, REG_DOMAIN *rd)
 	 * unitary reg domain of the pair
 	 */
 
-	for (i = 0 ; i < N(regDomains) ; i++) {
+	for (i = 0 ; i < ARRAY_SIZE(regDomains) ; i++) {
 		if (regDomains[i].regDmnEnum == regDmn) {
 			if (rd != NULL) {
 					zfMemoryCopy((u8_t *)rd, (u8_t *)&regDomains[i],
@@ -1653,7 +1650,7 @@ void zfHpGetRegulationTable(zdev_t *dev, u16_t regionCode, u16_t c_lo, u16_t c_h
 
 	zmw_enter_critical_section(dev);
 
-	for (cm = modes; cm < &modes[N(modes)]; cm++) {
+	for (cm = modes; cm < &modes[ARRAY_SIZE(modes)]; cm++) {
 		u16_t c;
 		u64_t *channelBM = NULL;
 		REG_DOMAIN *rd = NULL;
@@ -1846,7 +1843,7 @@ void zfHpGetRegulationTablefromCountry(zdev_t *dev, u16_t CountryCode)
 
 	zmw_declare_for_critical_section();
 
-	for (i = 0; i < N(allCountries); i++) {
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
 		if (CountryCode == allCountries[i].countryCode) {
 			RegDomain = allCountries[i].regDmnEnum;
 
@@ -1881,7 +1878,7 @@ u8_t zfHpGetRegulationTablefromISO(zdev_t *dev, u8_t *countryInfo, u8_t length)
 		strLen = 3; */
 	}
 	/* zm_debug_msg_s("Desired iso name = ", isoName); */
-	for (i = 0; i < N(allCountries); i++) {
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
 		/* zm_debug_msg_s("Current iso name = ", allCountries[i].isoName); */
 		if (zfMemoryIsEqual((u8_t *)allCountries[i].isoName, (u8_t *)&countryInfo[2], length-1)) {
 			/* DbgPrint("Set current iso name = %s\n", allCountries[i].isoName); */
@@ -1937,7 +1934,7 @@ const char *zfHpGetisoNamefromregionCode(zdev_t *dev, u16_t regionCode)
 {
 	u16_t i;
 
-	for (i = 0; i < N(allCountries); i++) {
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
 		if (allCountries[i].regDmnEnum == regionCode)
 			return allCountries[i].isoName;
 	}
@@ -1953,7 +1950,7 @@ u16_t zfHpGetRegionCodeFromIsoName(zdev_t *dev, u8_t *countryIsoName)
 	/* if no matching item, return default */
 	regionCode = DEF_REGDMN;
 
-	for (i = 0; i < N(allCountries); i++) {
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
 		if (zfMemoryIsEqual((u8_t *)allCountries[i].isoName, countryIsoName, 2)) {
 			regionCode = allCountries[i].regDmnEnum;
 		break;
diff --git a/drivers/staging/otus/ioctl.c b/drivers/staging/otus/ioctl.c
index a48c8e4a9ea..dc3066d2884 100644
--- a/drivers/staging/otus/ioctl.c
+++ b/drivers/staging/otus/ioctl.c
@@ -63,8 +63,7 @@
 
 extern u16_t zfLnxGetVapId(zdev_t *dev);
 
-static const u32_t channel_frequency_11A[] =
-{
+static const u32_t channel_frequency_11A[] = {
 	/* Even element for Channel Number, Odd for Frequency */
 	36, 5180,
 	40, 5200,
@@ -507,7 +506,7 @@ int usbdrvwext_giwname(struct net_device *dev,
 {
 	/* struct usbdrv_private *macp = dev->ml_priv; */
 
-	strcpy(wrq->name, "IEEE 802.11-MIMO");
+	strcpy(wrq->name, "IEEE 802.11abgn");
 
 	return 0;
 }
@@ -1361,7 +1360,7 @@ int usbdrvwext_giwpower(struct net_device *dev,
 }
 
 /*int usbdrvwext_setparam(struct net_device *dev, struct iw_request_info *info,
-*		   	 void *w, char *extra)
+*				void *w, char *extra)
 *{
 *	struct ieee80211vap *vap = dev->ml_priv;
 *	struct ieee80211com *ic = vap->iv_ic;
@@ -2261,10 +2260,10 @@ int usbdrv_wpa_ioctl(struct net_device *dev, struct athr_wlan_param *zdparm)
 		printk(KERN_ERR "wd->ap.wpaLen : % d\n", len);
 
 		/* DUMP WPA IE */
-		for(ii = 0; ii < len;) {
+		for (ii = 0; ii < len;) {
 			printk(KERN_ERR "0x%02x ", wpaie[ii]);
 
-			if((++ii % 16) == 0)
+			if ((++ii % 16) == 0)
 				printk(KERN_ERR "\n");
 		}
 		printk(KERN_ERR "\n");
@@ -2309,11 +2308,10 @@ int usbdrv_cenc_ioctl(struct net_device *dev, struct zydas_cenc_param *zdparm)
 	/* Get the AP Id */
 	apId = zfLnxGetVapId(dev);
 
-	if (apId == 0xffff) {
+	if (apId == 0xffff)
 		apId = 0;
-	} else {
+	else
 		apId = apId + 1;
-	}
 
 	switch (zdparm->cmd) {
 	case ZM_CMD_CENC_SETCENC:
@@ -2334,15 +2332,15 @@ int usbdrv_cenc_ioctl(struct net_device *dev, struct zydas_cenc_param *zdparm)
 
 		printk(KERN_ERR "Key Index : % d\n", zdparm->u.crypt.keyid);
 		printk(KERN_ERR "Encryption key = ");
-		for (ii = 0; ii < 16; ii++) {
+		for (ii = 0; ii < 16; ii++)
 			printk(KERN_ERR "0x%02x ", zdparm->u.crypt.key[ii]);
-		}
+
 		printk(KERN_ERR "\n");
 
 		printk(KERN_ERR "MIC key = ");
-		for(ii = 16; ii < ZM_CENC_KEY_SIZE; ii++) {
+		for (ii = 16; ii < ZM_CENC_KEY_SIZE; ii++)
 			printk(KERN_ERR "0x%02x ", zdparm->u.crypt.key[ii]);
-		}
+
 		printk(KERN_ERR "\n");
 
 		/* Set up key information */
@@ -2424,7 +2422,7 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		break;
 	case SIOCSIWRTS:
 		err = usbdrv_ioctl_setrts(dev, &wrq->u.rts);
-		if (! err)
+		if (!err)
 			changed = 1;
 		break;
 	/* set_auth */
@@ -2582,8 +2580,7 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 							ZM_AUTH_MODE_WPA);
 					} else if ((macp->supIe[17] == 0xf) &&
 						(macp->supIe[18] == 0xac) &&
-						(macp->supIe[19] == 0x2))
-					{
+						(macp->supIe[19] == 0x2)) {
 						printk(KERN_ERR
 				"wd->sta.authMode = ZM_AUTH_MODE_WPA2PSK\n");
 				/* wd->sta.authMode = ZM_AUTH_MODE_WPA2PSK; */
@@ -2592,8 +2589,7 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 				ZM_AUTH_MODE_WPA2PSK);
 			} else if ((macp->supIe[17] == 0xf) &&
 				(macp->supIe[18] == 0xac) &&
-				(macp->supIe[19] == 0x1))
-				{
+				(macp->supIe[19] == 0x1)) {
 					printk(KERN_ERR
 				"wd->sta.authMode = ZM_AUTH_MODE_WPA2\n");
 				/* wd->sta.authMode = ZM_AUTH_MODE_WPA2; */
@@ -2618,7 +2614,7 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 				zfiWlanSetWepStatus(dev, ZM_ENCRYPTION_AES);
 				}
 			}
-			//WPA2 or WPA2PSK
+			/*WPA2 or WPA2PSK*/
 			if ((macp->supIe[17] == 0xf) ||
 				(macp->supIe[18] == 0xac)) {
 				if (macp->supIe[13] == 0x2) {
@@ -2656,7 +2652,7 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			printk(KERN_ERR
 				"****************ZD_PARAM_COUNTERMEASURES : ");
 
-			if(arg) {
+			if (arg) {
 				/*    mCounterMeasureState=1; */
 				printk(KERN_ERR "enable\n");
 			} else {
@@ -2667,20 +2663,18 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (op == ZD_PARAM_DROPUNENCRYPTED) {
 			printk(KERN_ERR "ZD_PARAM_DROPUNENCRYPTED : ");
 
-			if(arg) {
+			if (arg)
 				printk(KERN_ERR "enable\n");
-			} else {
+			else
 				printk(KERN_ERR "disable\n");
-			}
 		}
 		if (op == ZD_PARAM_AUTH_ALGS) {
 			printk(KERN_ERR "ZD_PARAM_AUTH_ALGS : ");
 
-			if (arg == 0) {
+			if (arg == 0)
 				printk(KERN_ERR "OPEN_SYSTEM\n");
-			} else {
+			else
 				printk(KERN_ERR "SHARED_KEY\n");
-			}
 		}
 		if (op == ZD_PARAM_WPS_FILTER) {
 			printk(KERN_ERR "ZD_PARAM_WPS_FILTER : ");
@@ -2705,11 +2699,10 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		/* Get the AP Id */
 		apId = zfLnxGetVapId(dev);
 
-		if (apId == 0xffff) {
+		if (apId == 0xffff)
 			apId = 0;
-		} else {
+		else
 			apId = apId + 1;
-		}
 
 		if (copy_from_user(&req_wpaie, ifr->ifr_data,
 					sizeof(struct ieee80211req_wpaie))) {
@@ -2721,10 +2714,10 @@ int usbdrv_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 			for (j = 0; j < IEEE80211_ADDR_LEN; j++) {
 				if (macp->stawpaie[i].wpa_macaddr[j] !=
 						req_wpaie.wpa_macaddr[j])
-				break;
+					break;
 			}
 			if (j == 6)
-			break;
+				break;
 		}
 
 		if (i < ZM_OAL_MAX_STA_SUPPORT) {
diff --git a/drivers/staging/otus/wrap_sec.c b/drivers/staging/otus/wrap_sec.c
index 0b238e9999b..1fba7a98d52 100644
--- a/drivers/staging/otus/wrap_sec.c
+++ b/drivers/staging/otus/wrap_sec.c
@@ -36,7 +36,7 @@ extern int zfLnxCencSendMsg(struct sock *netlink_sk, u_int8_t *msg, int len);
 u16_t zfLnxCencAsocNotify(zdev_t *dev, u16_t *macAddr, u8_t *body,
 				u16_t bodySize, u16_t port)
 {
-	struct usbdrv_private *macp = (struct usbdrv_private *)dev->priv;
+	struct usbdrv_private *macp = dev->priv;
 	struct zydas_cenc_sta_info cenc_info;
 	/* struct sock *netlink_sk;	*/
 	u8_t ie_len;
diff --git a/drivers/staging/otus/wrap_usb.c b/drivers/staging/otus/wrap_usb.c
index 93459cadc47..9f04047bf5a 100644
--- a/drivers/staging/otus/wrap_usb.c
+++ b/drivers/staging/otus/wrap_usb.c
@@ -104,6 +104,11 @@ u32_t zfwUsbSubmitControl(zdev_t *dev, u8_t req, u16_t value, u16_t index,
 
 	if (size > 0) {
 		buf = kmalloc(size, GFP_KERNEL);
+		if (buf == NULL) {
+			pr_err("zfwUsbSubmitControl() failed, "
+				  "kmalloc() returned NULL\n");
+			return 1;
+		}
 		memcpy(buf, (u8_t *)data, size);
 	} else
 		buf = NULL;
diff --git a/drivers/staging/otus/wwrap.c b/drivers/staging/otus/wwrap.c
index b02eb42cd79..fcd3da07155 100644
--- a/drivers/staging/otus/wwrap.c
+++ b/drivers/staging/otus/wwrap.c
@@ -29,24 +29,24 @@
 #include <linux/slab.h>
 #include <net/iw_handler.h>
 
-extern void zfiRecv80211(zdev_t* dev, zbuf_t* buf, struct zsAdditionInfo* addInfo);
-extern void zfCoreRecv(zdev_t* dev, zbuf_t* buf, struct zsAdditionInfo* addInfo);
-extern void zfIdlChkRsp(zdev_t* dev, u32_t* rsp, u16_t rspLen);
-extern void zfIdlRsp(zdev_t* dev, u32_t *rsp, u16_t rspLen);
+extern void zfiRecv80211(zdev_t *dev, zbuf_t *buf, struct zsAdditionInfo *addInfo);
+extern void zfCoreRecv(zdev_t *dev, zbuf_t *buf, struct zsAdditionInfo *addInfo);
+extern void zfIdlChkRsp(zdev_t *dev, u32_t *rsp, u16_t rspLen);
+extern void zfIdlRsp(zdev_t *dev, u32_t *rsp, u16_t rspLen);
 
 
 
-//extern struct zsWdsStruct wds[ZM_WDS_PORT_NUMBER];
+/*extern struct zsWdsStruct wds[ZM_WDS_PORT_NUMBER];*/
 extern struct zsVapStruct vap[ZM_VAP_PORT_NUMBER];
 
-u32_t zfLnxUsbSubmitTxData(zdev_t* dev);
-u32_t zfLnxUsbIn(zdev_t* dev, urb_t *urb, zbuf_t *buf);
+u32_t zfLnxUsbSubmitTxData(zdev_t *dev);
+u32_t zfLnxUsbIn(zdev_t *dev, urb_t *urb, zbuf_t *buf);
 u32_t zfLnxSubmitRegInUrb(zdev_t *dev);
 u32_t zfLnxUsbSubmitBulkUrb(urb_t *urb, struct usb_device *usb, u16_t epnum, u16_t direction,
-        void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context);
+	void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context);
 u32_t zfLnxUsbSubmitIntUrb(urb_t *urb, struct usb_device *usb, u16_t epnum, u16_t direction,
-        void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context,
-        u32_t interval);
+	void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context,
+	u32_t interval);
 
 u16_t zfLnxGetFreeTxUrb(zdev_t *dev)
 {
@@ -56,22 +56,19 @@ u16_t zfLnxGetFreeTxUrb(zdev_t *dev)
 
     spin_lock_irqsave(&macp->cs_lock, irqFlag);
 
-    //idx = ((macp->TxUrbTail + 1) & (ZM_MAX_TX_URB_NUM - 1));
+    /*idx = ((macp->TxUrbTail + 1) & (ZM_MAX_TX_URB_NUM - 1));*/
 
-    //if (idx != macp->TxUrbHead)
-    if (macp->TxUrbCnt != 0)
-    {
-        idx = macp->TxUrbTail;
-        macp->TxUrbTail = ((macp->TxUrbTail + 1) & (ZM_MAX_TX_URB_NUM - 1));
-        macp->TxUrbCnt--;
-    }
-    else
-    {
-        //printk(KERN_ERR "macp->TxUrbCnt: %d\n", macp->TxUrbCnt);
-        idx = 0xffff;
-    }
+    /*if (idx != macp->TxUrbHead)*/
+    if (macp->TxUrbCnt != 0) {
+	idx = macp->TxUrbTail;
+	macp->TxUrbTail = ((macp->TxUrbTail + 1) & (ZM_MAX_TX_URB_NUM - 1));
+	macp->TxUrbCnt--;
+	} else {
+	/*printk(KERN_ERR "macp->TxUrbCnt: %d\n", macp->TxUrbCnt);*/
+	idx = 0xffff;
+	}
 
-    spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
     return idx;
 }
 
@@ -85,16 +82,13 @@ void zfLnxPutTxUrb(zdev_t *dev)
 
     idx = ((macp->TxUrbHead + 1) & (ZM_MAX_TX_URB_NUM - 1));
 
-    //if (idx != macp->TxUrbTail)
-    if (macp->TxUrbCnt < ZM_MAX_TX_URB_NUM)
-    {
-        macp->TxUrbHead = idx;
-        macp->TxUrbCnt++;
-    }
-    else
-    {
-        printk("UsbTxUrbQ inconsistent: TxUrbHead: %d, TxUrbTail: %d\n",
-                macp->TxUrbHead, macp->TxUrbTail);
+    /*if (idx != macp->TxUrbTail)*/
+    if (macp->TxUrbCnt < ZM_MAX_TX_URB_NUM) {
+	macp->TxUrbHead = idx;
+	macp->TxUrbCnt++;
+    } else {
+	printk("UsbTxUrbQ inconsistent: TxUrbHead: %d, TxUrbTail: %d\n",
+	macp->TxUrbHead, macp->TxUrbTail);
     }
 
     spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
@@ -125,24 +119,20 @@ UsbTxQ_t *zfLnxGetUsbTxBuffer(zdev_t *dev)
 
     idx = ((macp->TxBufHead+1) & (ZM_MAX_TX_BUF_NUM - 1));
 
-    //if (idx != macp->TxBufTail)
-    if (macp->TxBufCnt > 0)
-    {
-        //printk("CWY - zfwGetUsbTxBuffer ,macp->TxBufCnt = %d\n", macp->TxBufCnt);
-        TxQ = (UsbTxQ_t *)&(macp->UsbTxBufQ[macp->TxBufHead]);
-        macp->TxBufHead = ((macp->TxBufHead+1) & (ZM_MAX_TX_BUF_NUM - 1));
-        macp->TxBufCnt--;
-    }
-    else
-    {
-        if (macp->TxBufHead != macp->TxBufTail)
-        {
-            printk(KERN_ERR "zfwGetUsbTxBuf UsbTxBufQ inconsistent: TxBufHead: %d, TxBufTail: %d\n",
-                    macp->TxBufHead, macp->TxBufTail);
-        }
-
-        spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
-        return NULL;
+    /*if (idx != macp->TxBufTail)*/
+    if (macp->TxBufCnt > 0) {
+	/*printk("CWY - zfwGetUsbTxBuffer ,macp->TxBufCnt = %d\n", macp->TxBufCnt);*/
+	TxQ = (UsbTxQ_t *)&(macp->UsbTxBufQ[macp->TxBufHead]);
+	macp->TxBufHead = ((macp->TxBufHead+1) & (ZM_MAX_TX_BUF_NUM - 1));
+	macp->TxBufCnt--;
+	} else {
+	if (macp->TxBufHead != macp->TxBufTail) {
+		printk(KERN_ERR "zfwGetUsbTxBuf UsbTxBufQ inconsistent: TxBufHead: %d, TxBufTail: %d\n",
+		macp->TxBufHead, macp->TxBufTail);
+	}
+
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	return NULL;
     }
 
     spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
@@ -150,8 +140,8 @@ UsbTxQ_t *zfLnxGetUsbTxBuffer(zdev_t *dev)
 }
 
 u16_t zfLnxPutUsbTxBuffer(zdev_t *dev, u8_t *hdr, u16_t hdrlen,
-        u8_t *snap, u16_t snapLen, u8_t *tail, u16_t tailLen,
-        zbuf_t *buf, u16_t offset)
+	u8_t *snap, u16_t snapLen, u8_t *tail, u16_t tailLen,
+	zbuf_t *buf, u16_t offset)
 {
     struct usbdrv_private *macp = dev->ml_priv;
     u16_t idx;
@@ -163,32 +153,29 @@ u16_t zfLnxPutUsbTxBuffer(zdev_t *dev, u8_t *hdr, u16_t hdrlen,
     idx = ((macp->TxBufTail+1) & (ZM_MAX_TX_BUF_NUM - 1));
 
     /* For Tx debug */
-    //zm_assert(macp->TxBufCnt >= 0); // deleted because of always true
-
-    //if (idx != macp->TxBufHead)
-    if (macp->TxBufCnt < ZM_MAX_TX_BUF_NUM)
-    {
-        //printk("CWY - zfwPutUsbTxBuffer ,macp->TxBufCnt = %d\n", macp->TxBufCnt);
-        TxQ = (UsbTxQ_t *)&(macp->UsbTxBufQ[macp->TxBufTail]);
-        memcpy(TxQ->hdr, hdr, hdrlen);
-        TxQ->hdrlen = hdrlen;
-        memcpy(TxQ->snap, snap, snapLen);
-        TxQ->snapLen = snapLen;
-        memcpy(TxQ->tail, tail, tailLen);
-        TxQ->tailLen = tailLen;
-        TxQ->buf = buf;
-        TxQ->offset = offset;
-
-        macp->TxBufTail = ((macp->TxBufTail+1) & (ZM_MAX_TX_BUF_NUM - 1));
-        macp->TxBufCnt++;
-    }
-    else
-    {
-        printk(KERN_ERR "zfLnxPutUsbTxBuffer UsbTxBufQ inconsistent: TxBufHead: %d, TxBufTail: %d, TxBufCnt: %d\n",
-            macp->TxBufHead, macp->TxBufTail, macp->TxBufCnt);
-        spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
-        return 0xffff;
-    }
+    /*zm_assert(macp->TxBufCnt >= 0); // deleted because of always true*/
+
+    /*if (idx != macp->TxBufHead)*/
+    if (macp->TxBufCnt < ZM_MAX_TX_BUF_NUM) {
+	/*printk("CWY - zfwPutUsbTxBuffer ,macp->TxBufCnt = %d\n", macp->TxBufCnt);*/
+	TxQ = (UsbTxQ_t *)&(macp->UsbTxBufQ[macp->TxBufTail]);
+	memcpy(TxQ->hdr, hdr, hdrlen);
+	TxQ->hdrlen = hdrlen;
+	memcpy(TxQ->snap, snap, snapLen);
+	TxQ->snapLen = snapLen;
+	memcpy(TxQ->tail, tail, tailLen);
+	TxQ->tailLen = tailLen;
+	TxQ->buf = buf;
+	TxQ->offset = offset;
+
+	macp->TxBufTail = ((macp->TxBufTail+1) & (ZM_MAX_TX_BUF_NUM - 1));
+	macp->TxBufCnt++;
+	} else {
+	printk(KERN_ERR "zfLnxPutUsbTxBuffer UsbTxBufQ inconsistent: TxBufHead: %d, TxBufTail: %d, TxBufCnt: %d\n",
+		macp->TxBufHead, macp->TxBufTail, macp->TxBufCnt);
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	return 0xffff;
+	}
 
     spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
     return 0;
@@ -197,28 +184,25 @@ u16_t zfLnxPutUsbTxBuffer(zdev_t *dev, u8_t *hdr, u16_t hdrlen,
 zbuf_t *zfLnxGetUsbRxBuffer(zdev_t *dev)
 {
     struct usbdrv_private *macp = dev->ml_priv;
-    //u16_t idx;
+    /*u16_t idx;*/
     zbuf_t *buf;
     unsigned long irqFlag;
 
     spin_lock_irqsave(&macp->cs_lock, irqFlag);
 
-    //idx = ((macp->RxBufHead+1) & (ZM_MAX_RX_URB_NUM - 1));
-
-    //if (idx != macp->RxBufTail)
-    if (macp->RxBufCnt != 0)
-    {
-        buf = macp->UsbRxBufQ[macp->RxBufHead];
-        macp->RxBufHead = ((macp->RxBufHead+1) & (ZM_MAX_RX_URB_NUM - 1));
-        macp->RxBufCnt--;
-    }
-    else
-    {
-        printk("RxBufQ inconsistent: RxBufHead: %d, RxBufTail: %d\n",
-                macp->RxBufHead, macp->RxBufTail);
-        spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
-        return NULL;
-    }
+    /*idx = ((macp->RxBufHead+1) & (ZM_MAX_RX_URB_NUM - 1));*/
+
+    /*if (idx != macp->RxBufTail)*/
+    if (macp->RxBufCnt != 0) {
+	buf = macp->UsbRxBufQ[macp->RxBufHead];
+	macp->RxBufHead = ((macp->RxBufHead+1) & (ZM_MAX_RX_URB_NUM - 1));
+	macp->RxBufCnt--;
+    } else {
+	printk("RxBufQ inconsistent: RxBufHead: %d, RxBufTail: %d\n",
+		macp->RxBufHead, macp->RxBufTail);
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	return NULL;
+	}
 
     spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
     return buf;
@@ -234,61 +218,56 @@ u32_t zfLnxPutUsbRxBuffer(zdev_t *dev, zbuf_t *buf)
 
     idx = ((macp->RxBufTail+1) & (ZM_MAX_RX_URB_NUM - 1));
 
-    //if (idx != macp->RxBufHead)
-    if (macp->RxBufCnt != ZM_MAX_RX_URB_NUM)
-    {
-        macp->UsbRxBufQ[macp->RxBufTail] = buf;
-        macp->RxBufTail = idx;
-        macp->RxBufCnt++;
-    }
-    else
-    {
-        printk("RxBufQ inconsistent: RxBufHead: %d, RxBufTail: %d\n",
-                macp->RxBufHead, macp->RxBufTail);
-        spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
-        return 0xffff;
-    }
+    /*if (idx != macp->RxBufHead)*/
+    if (macp->RxBufCnt != ZM_MAX_RX_URB_NUM) {
+	macp->UsbRxBufQ[macp->RxBufTail] = buf;
+	macp->RxBufTail = idx;
+	macp->RxBufCnt++;
+    } else {
+	printk("RxBufQ inconsistent: RxBufHead: %d, RxBufTail: %d\n",
+		macp->RxBufHead, macp->RxBufTail);
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	return 0xffff;
+	}
 
-    spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
-    return 0;
+	spin_unlock_irqrestore(&macp->cs_lock, irqFlag);
+	return 0;
 }
 
 void zfLnxUsbDataOut_callback(urb_t *urb)
 {
-    zdev_t* dev = urb->context;
-    //UsbTxQ_t *TxData;
+    zdev_t *dev = urb->context;
+    /*UsbTxQ_t *TxData;*/
 
     /* Give the urb back */
     zfLnxPutTxUrb(dev);
 
     /* Check whether there is any pending buffer needed */
     /* to be sent */
-    if (zfLnxCheckTxBufferCnt(dev) != 0)
-    {
-        //TxData = zfwGetUsbTxBuffer(dev);
-
-        //if (TxData == NULL)
-        //{
-        //    printk("Get a NULL buffer from zfwGetUsbTxBuffer\n");
-        //    return;
-        //}
-        //else
-        //{
-            zfLnxUsbSubmitTxData(dev);
-        //}
+    if (zfLnxCheckTxBufferCnt(dev) != 0) {
+	/*TxData = zfwGetUsbTxBuffer(dev);
+	//if (TxData == NULL)
+	//{
+	//    printk("Get a NULL buffer from zfwGetUsbTxBuffer\n");
+	//    return;
+	//}
+	//else
+	//{
+		zfLnxUsbSubmitTxData(dev);
+	//}*/
     }
 }
 
 void zfLnxUsbDataIn_callback(urb_t *urb)
 {
-    zdev_t* dev = urb->context;
+    zdev_t *dev = urb->context;
     struct usbdrv_private *macp = dev->ml_priv;
     zbuf_t *buf;
     zbuf_t *new_buf;
     int status;
 
 #if ZM_USB_STREAM_MODE == 1
-    static int remain_len = 0, check_pad = 0, check_len = 0;
+    static int remain_len, check_pad, check_len;
     int index = 0;
     int chk_idx;
     u16_t pkt_len;
@@ -299,47 +278,45 @@ void zfLnxUsbDataIn_callback(urb_t *urb)
 #endif
 
     /* Check status for URB */
-    if (urb->status != 0){
-        printk("zfLnxUsbDataIn_callback() : status=0x%x\n", urb->status);
-        if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)
-            && (urb->status != -ESHUTDOWN))
-        {
-                if (urb->status == -EPIPE){
-                    //printk(KERN_ERR "nonzero read bulk status received: -EPIPE");
-                    status = -1;
-                }
-
-                if (urb->status == -EPROTO){
-                    //printk(KERN_ERR "nonzero read bulk status received: -EPROTO");
-                    status = -1;
-                }
-        }
-
-        //printk(KERN_ERR "urb->status: 0x%08x\n", urb->status);
-
-        /* Dequeue skb buffer */
-        buf = zfLnxGetUsbRxBuffer(dev);
-        dev_kfree_skb_any(buf);
-        #if 0
-        /* Enqueue skb buffer */
-        zfLnxPutUsbRxBuffer(dev, buf);
-
-        /* Submit a Rx urb */
-        zfLnxUsbIn(dev, urb, buf);
-        #endif
-        return;
-    }
+    if (urb->status != 0) {
+	printk("zfLnxUsbDataIn_callback() : status=0x%x\n", urb->status);
+	if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)
+		&& (urb->status != -ESHUTDOWN)) {
+		if (urb->status == -EPIPE) {
+			/*printk(KERN_ERR "nonzero read bulk status received: -EPIPE");*/
+			status = -1;
+		}
+
+		if (urb->status == -EPROTO) {
+			/*printk(KERN_ERR "nonzero read bulk status received: -EPROTO");*/
+			status = -1;
+		}
+	}
+
+	/*printk(KERN_ERR "urb->status: 0x%08x\n", urb->status);*/
+
+	/* Dequeue skb buffer */
+	buf = zfLnxGetUsbRxBuffer(dev);
+	dev_kfree_skb_any(buf);
+	#if 0
+	/* Enqueue skb buffer */
+	zfLnxPutUsbRxBuffer(dev, buf);
 
-    if (urb->actual_length == 0)
-    {
-        printk(KERN_ERR "Get an URB whose length is zero");
-        status = -1;
+	/* Submit a Rx urb */
+	zfLnxUsbIn(dev, urb, buf);
+	#endif
+	return;
+	}
+
+    if (urb->actual_length == 0) {
+	printk(KERN_ERR "Get an URB whose length is zero");
+	status = -1;
     }
 
     /* Dequeue skb buffer */
     buf = zfLnxGetUsbRxBuffer(dev);
 
-    //zfwBufSetSize(dev, buf, urb->actual_length);
+    /*zfwBufSetSize(dev, buf, urb->actual_length);*/
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
     buf->tail = 0;
     buf->len = 0;
@@ -353,134 +330,122 @@ void zfLnxUsbDataIn_callback(urb_t *urb)
     skb_put(buf, urb->actual_length);
 
 #if ZM_USB_STREAM_MODE == 1
-    if (remain_len != 0)
-    {
-        zbuf_t *remain_buf = macp->reamin_buf;
+    if (remain_len != 0) {
+	zbuf_t *remain_buf = macp->reamin_buf;
 
-        index = remain_len;
-        remain_len -= check_pad;
+	index = remain_len;
+	remain_len -= check_pad;
 
-        /*  Copy data */
-        memcpy(&(remain_buf->data[check_len]), buf->data, remain_len);
-        check_len += remain_len;
-        remain_len = 0;
+	/*  Copy data */
+	memcpy(&(remain_buf->data[check_len]), buf->data, remain_len);
+	check_len += remain_len;
+	remain_len = 0;
 
-        rxBufPool[rxBufPoolIndex++] = remain_buf;
+	rxBufPool[rxBufPoolIndex++] = remain_buf;
     }
 
-    while(index < urb->actual_length)
-    {
-        pkt_len = buf->data[index] + (buf->data[index+1] << 8);
-        pkt_tag = buf->data[index+2] + (buf->data[index+3] << 8);
-
-        if (pkt_tag == 0x4e00)
-        {
-            int pad_len;
-
-            //printk("Get a packet, index: %d, pkt_len: 0x%04x\n", index, pkt_len);
-            #if 0
-            /* Dump data */
-            for (ii = index; ii < pkt_len+4;)
-            {
-                printk("%02x ", (buf->data[ii] & 0xff));
-
-                if ((++ii % 16) == 0)
-                    printk("\n");
-            }
-
-            printk("\n");
-            #endif
-
-            pad_len = 4 - (pkt_len & 0x3);
-
-            if(pad_len == 4)
-                pad_len = 0;
-
-            chk_idx = index;
-            index = index + 4 + pkt_len + pad_len;
-
-            if (index > ZM_MAX_RX_BUFFER_SIZE)
-            {
-                remain_len = index - ZM_MAX_RX_BUFFER_SIZE; // - pad_len;
-                check_len = ZM_MAX_RX_BUFFER_SIZE - chk_idx - 4;
-                check_pad = pad_len;
-
-                /* Allocate a skb buffer */
-                //new_buf = zfwBufAllocate(dev, ZM_MAX_RX_BUFFER_SIZE);
-                new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
-
-                /* Set skb buffer length */
-            #ifdef NET_SKBUFF_DATA_USES_OFFSET
-                new_buf->tail = 0;
-                new_buf->len = 0;
-            #else
-                new_buf->tail = new_buf->data;
-                new_buf->len = 0;
-            #endif
-
-                skb_put(new_buf, pkt_len);
-
-                /* Copy the buffer */
-                memcpy(new_buf->data, &(buf->data[chk_idx+4]), check_len);
-
-                /* Record the buffer pointer */
-                macp->reamin_buf = new_buf;
-            }
-            else
-            {
-        #ifdef ZM_DONT_COPY_RX_BUFFER
-                if (rxBufPoolIndex == 0)
-                {
-                    new_buf = skb_clone(buf, GFP_ATOMIC);
-
-                    new_buf->data = &(buf->data[chk_idx+4]);
-                    new_buf->len = pkt_len;
-                }
-                else
-                {
-        #endif
-                /* Allocate a skb buffer */
-                new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
-
-                /* Set skb buffer length */
-            #ifdef NET_SKBUFF_DATA_USES_OFFSET
-                new_buf->tail = 0;
-                new_buf->len = 0;
-            #else
-                new_buf->tail = new_buf->data;
-                new_buf->len = 0;
-            #endif
-
-                skb_put(new_buf, pkt_len);
-
-                /* Copy the buffer */
-                memcpy(new_buf->data, &(buf->data[chk_idx+4]), pkt_len);
-
-        #ifdef ZM_DONT_COPY_RX_BUFFER
-                }
-        #endif
-                rxBufPool[rxBufPoolIndex++] = new_buf;
-            }
-        }
-        else
-        {
-            printk(KERN_ERR "Can't find tag, pkt_len: 0x%04x, tag: 0x%04x\n", pkt_len, pkt_tag);
-
-            /* Free buffer */
-            dev_kfree_skb_any(buf);
-
-            /* Allocate a skb buffer */
-            new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
-
-            /* Enqueue skb buffer */
-            zfLnxPutUsbRxBuffer(dev, new_buf);
-
-            /* Submit a Rx urb */
-            zfLnxUsbIn(dev, urb, new_buf);
-
-            return;
-        }
-    }
+    while (index < urb->actual_length) {
+	pkt_len = buf->data[index] + (buf->data[index+1] << 8);
+	pkt_tag = buf->data[index+2] + (buf->data[index+3] << 8);
+
+	if (pkt_tag == 0x4e00) {
+		int pad_len;
+
+		/*printk("Get a packet, index: %d, pkt_len: 0x%04x\n", index, pkt_len);*/
+		#if 0
+		/* Dump data */
+		for (ii = index; ii < pkt_len+4;) {
+			printk("%02x ", (buf->data[ii] & 0xff));
+
+			if ((++ii % 16) == 0)
+			printk("\n");
+			}
+
+			printk("\n");
+		#endif
+
+		pad_len = 4 - (pkt_len & 0x3);
+
+		if (pad_len == 4)
+		pad_len = 0;
+
+		chk_idx = index;
+		index = index + 4 + pkt_len + pad_len;
+
+		if (index > ZM_MAX_RX_BUFFER_SIZE) {
+			remain_len = index - ZM_MAX_RX_BUFFER_SIZE; /* - pad_len;*/
+			check_len = ZM_MAX_RX_BUFFER_SIZE - chk_idx - 4;
+			check_pad = pad_len;
+
+			/* Allocate a skb buffer */
+			/*new_buf = zfwBufAllocate(dev, ZM_MAX_RX_BUFFER_SIZE);*/
+			new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
+
+			/* Set skb buffer length */
+			#ifdef NET_SKBUFF_DATA_USES_OFFSET
+			new_buf->tail = 0;
+			new_buf->len = 0;
+			#else
+			new_buf->tail = new_buf->data;
+			new_buf->len = 0;
+			#endif
+
+			skb_put(new_buf, pkt_len);
+
+			/* Copy the buffer */
+			memcpy(new_buf->data, &(buf->data[chk_idx+4]), check_len);
+
+			/* Record the buffer pointer */
+			macp->reamin_buf = new_buf;
+		} else  {
+			#ifdef ZM_DONT_COPY_RX_BUFFER
+			if (rxBufPoolIndex == 0) {
+				new_buf = skb_clone(buf, GFP_ATOMIC);
+
+				new_buf->data = &(buf->data[chk_idx+4]);
+				new_buf->len = pkt_len;
+			} else  {
+				#endif
+				/* Allocate a skb buffer */
+				new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
+
+				/* Set skb buffer length */
+				#ifdef NET_SKBUFF_DATA_USES_OFFSET
+				new_buf->tail = 0;
+				new_buf->len = 0;
+				#else
+				new_buf->tail = new_buf->data;
+				new_buf->len = 0;
+				#endif
+
+				skb_put(new_buf, pkt_len);
+
+				/* Copy the buffer */
+				memcpy(new_buf->data, &(buf->data[chk_idx+4]), pkt_len);
+
+				#ifdef ZM_DONT_COPY_RX_BUFFER
+				}
+			#endif
+			rxBufPool[rxBufPoolIndex++] = new_buf;
+			}
+		} else {
+			printk(KERN_ERR "Can't find tag, pkt_len: 0x%04x, tag: 0x%04x\n", pkt_len, pkt_tag);
+
+			/* Free buffer */
+			dev_kfree_skb_any(buf);
+
+			/* Allocate a skb buffer */
+			new_buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
+
+			/* Enqueue skb buffer */
+			zfLnxPutUsbRxBuffer(dev, new_buf);
+
+			/* Submit a Rx urb */
+			zfLnxUsbIn(dev, urb, new_buf);
+
+			return;
+			}
+		}
 
     /* Free buffer */
     dev_kfree_skb_any(buf);
@@ -496,9 +461,8 @@ void zfLnxUsbDataIn_callback(urb_t *urb)
     zfLnxUsbIn(dev, urb, new_buf);
 
 #if ZM_USB_STREAM_MODE == 1
-    for(ii = 0; ii < rxBufPoolIndex; ii++)
-    {
-        macp->usbCbFunctions.zfcbUsbRecv(dev, rxBufPool[ii]);
+    for (ii = 0; ii < rxBufPoolIndex; ii++) {
+	macp->usbCbFunctions.zfcbUsbRecv(dev, rxBufPool[ii]);
     }
 #else
     /* pass data to upper layer */
@@ -508,51 +472,48 @@ void zfLnxUsbDataIn_callback(urb_t *urb)
 
 void zfLnxUsbRegOut_callback(urb_t *urb)
 {
-    //dev_t* dev = urb->context;
+    /*dev_t* dev = urb->context;*/
 
-    //printk(KERN_ERR "zfwUsbRegOut_callback\n");
+	/*printk(KERN_ERR "zfwUsbRegOut_callback\n");*/
 }
 
 void zfLnxUsbRegIn_callback(urb_t *urb)
 {
-    zdev_t* dev = urb->context;
+    zdev_t *dev = urb->context;
     u32_t rsp[64/4];
     int status;
     struct usbdrv_private *macp = dev->ml_priv;
 
     /* Check status for URB */
-    if (urb->status != 0){
-        printk("zfLnxUsbRegIn_callback() : status=0x%x\n", urb->status);
-        if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)
-            && (urb->status != -ESHUTDOWN))
-        {
-                if (urb->status == -EPIPE){
-                    //printk(KERN_ERR "nonzero read bulk status received: -EPIPE");
-                    status = -1;
-                }
-
-                if (urb->status == -EPROTO){
-                    //printk(KERN_ERR "nonzero read bulk status received: -EPROTO");
-                    status = -1;
-                }
-        }
-
-        //printk(KERN_ERR "urb->status: 0x%08x\n", urb->status);
-        return;
-    }
+    if (urb->status != 0) {
+	printk("zfLnxUsbRegIn_callback() : status=0x%x\n", urb->status);
+	if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET) && (urb->status != -ESHUTDOWN)) {
+		if (urb->status == -EPIPE) {
+			/*printk(KERN_ERR "nonzero read bulk status received: -EPIPE");*/
+			status = -1;
+		}
+
+		if (urb->status == -EPROTO) {
+			/*printk(KERN_ERR "nonzero read bulk status received: -EPROTO");*/
+			status = -1;
+		}
+	}
+
+	/*printk(KERN_ERR "urb->status: 0x%08x\n", urb->status);*/
+	return;
+	}
 
-    if (urb->actual_length == 0)
-    {
-        printk(KERN_ERR "Get an URB whose length is zero");
-        status = -1;
+    if (urb->actual_length == 0) {
+	printk(KERN_ERR "Get an URB whose length is zero");
+	status = -1;
     }
 
     /* Copy data into respone buffer */
     memcpy(rsp, macp->regUsbReadBuf, urb->actual_length);
 
     /* Notify to upper layer */
-    //zfIdlChkRsp(dev, rsp, (u16_t)urb->actual_length);
-    //zfiUsbRegIn(dev, rsp, (u16_t)urb->actual_length);
+    /*zfIdlChkRsp(dev, rsp, (u16_t)urb->actual_length);*/
+    /*zfiUsbRegIn(dev, rsp, (u16_t)urb->actual_length);*/
     macp->usbCbFunctions.zfcbUsbRegIn(dev, rsp, (u16_t)urb->actual_length);
 
     /* Issue another USB IN URB */
@@ -564,22 +525,22 @@ u32_t zfLnxSubmitRegInUrb(zdev_t *dev)
     u32_t ret;
     struct usbdrv_private *macp = dev->ml_priv;
 
-    /* Submit a rx urb */
+    /* Submit a rx urb
     //ret = zfLnxUsbSubmitBulkUrb(macp->RegInUrb, macp->udev,
     //        USB_REG_IN_PIPE, USB_DIR_IN, macp->regUsbReadBuf,
     //        ZM_USB_REG_MAX_BUF_SIZE, zfLnxUsbRegIn_callback, dev);
     //CWYang(-)
     //if (ret != 0)
-    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);
+    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);*/
 
     ret = zfLnxUsbSubmitIntUrb(macp->RegInUrb, macp->udev,
-            USB_REG_IN_PIPE, USB_DIR_IN, macp->regUsbReadBuf,
-            ZM_USB_REG_MAX_BUF_SIZE, zfLnxUsbRegIn_callback, dev, 1);
+	USB_REG_IN_PIPE, USB_DIR_IN, macp->regUsbReadBuf,
+	ZM_USB_REG_MAX_BUF_SIZE, zfLnxUsbRegIn_callback, dev, 1);
 
     return ret;
 }
 
-u32_t zfLnxUsbSubmitTxData(zdev_t* dev)
+u32_t zfLnxUsbSubmitTxData(zdev_t *dev)
 {
     u32_t i;
     u32_t ret;
@@ -600,39 +561,33 @@ u32_t zfLnxUsbSubmitTxData(zdev_t* dev)
     freeTxUrb = zfLnxGetFreeTxUrb(dev);
 
     /* If there is no any free Tx Urb */
-    if (freeTxUrb == 0xffff)
-    {
-        //printk(KERN_ERR "Can't get free Tx Urb\n");
-        //printk("CWY - Can't get free Tx Urb\n");
-        return 0xffff;
+    if (freeTxUrb == 0xffff) {
+	/*printk(KERN_ERR "Can't get free Tx Urb\n");
+	//printk("CWY - Can't get free Tx Urb\n");*/
+	return 0xffff;
     }
 
 #if ZM_USB_TX_STREAM_MODE == 1
     usbTxAggCnt = zfLnxCheckTxBufferCnt(dev);
 
-    if (usbTxAggCnt >= ZM_MAX_TX_AGGREGATE_NUM)
-    {
-       usbTxAggCnt = ZM_MAX_TX_AGGREGATE_NUM;
-    }
-    else
-    {
-       usbTxAggCnt = 1;
+    if (usbTxAggCnt >= ZM_MAX_TX_AGGREGATE_NUM) {
+	usbTxAggCnt = ZM_MAX_TX_AGGREGATE_NUM;
+    } else {
+	usbTxAggCnt = 1;
     }
 
-    //printk("usbTxAggCnt: %d\n", usbTxAggCnt);
+    /*printk("usbTxAggCnt: %d\n", usbTxAggCnt);*/
 #endif
 
 #if ZM_USB_TX_STREAM_MODE == 1
-    for(ii = 0; ii < usbTxAggCnt; ii++)
-    {
+    for (ii = 0; ii < usbTxAggCnt; ii++) {
 #endif
     /* Dequeue the packet from UsbTxBufQ */
     TxData = zfLnxGetUsbTxBuffer(dev);
-    if (TxData == NULL)
-    {
-        /* Give the urb back */
-        zfLnxPutTxUrb(dev);
-        return 0xffff;
+    if (TxData == NULL) {
+	/* Give the urb back */
+	zfLnxPutTxUrb(dev);
+	return 0xffff;
     }
 
     /* Point to the freeTxUrb buffer */
@@ -644,114 +599,103 @@ u32_t zfLnxUsbSubmitTxData(zdev_t* dev)
 
     /* Add the packet length and tag information */
     *pUsbTxHdr++ = TxData->hdrlen + TxData->snapLen +
-             (TxData->buf->len - TxData->offset) +  TxData->tailLen;
+	(TxData->buf->len - TxData->offset) +  TxData->tailLen;
 
     *pUsbTxHdr++ = 0x697e;
 
     puTxBuf += 4;
-#endif // #ifdef ZM_USB_TX_STREAM_MODE
+#endif /* #ifdef ZM_USB_TX_STREAM_MODE*/
 
     /* Copy WLAN header and packet buffer into USB buffer */
-    for(i = 0; i < TxData->hdrlen; i++)
-    {
-        *puTxBuf++ = TxData->hdr[i];
+    for (i = 0; i < TxData->hdrlen; i++) {
+	*puTxBuf++ = TxData->hdr[i];
     }
 
     /* Copy SNAP header */
-    for(i = 0; i < TxData->snapLen; i++)
-    {
-        *puTxBuf++ = TxData->snap[i];
+    for (i = 0; i < TxData->snapLen; i++) {
+	*puTxBuf++ = TxData->snap[i];
     }
 
     /* Copy packet buffer */
-    for(i = 0; i < TxData->buf->len - TxData->offset; i++)
-    {
-    	//*puTxBuf++ = zmw_rx_buf_readb(dev, TxData->buf, i);
-    	*puTxBuf++ = *(u8_t*)((u8_t*)TxData->buf->data+i+TxData->offset);
+    for (i = 0; i < TxData->buf->len - TxData->offset; i++) {
+	/*puTxBuf++ = zmw_rx_buf_readb(dev, TxData->buf, i);*/
+	*puTxBuf++ = *(u8_t *)((u8_t *)TxData->buf->data+i+TxData->offset);
     }
 
     /* Copy tail */
-    for(i = 0; i < TxData->tailLen; i++)
-    {
-        *puTxBuf++ = TxData->tail[i];
+    for (i = 0; i < TxData->tailLen; i++) {
+	*puTxBuf++ = TxData->tail[i];
     }
 
     len = TxData->hdrlen+TxData->snapLen+TxData->buf->len+TxData->tailLen-TxData->offset;
 
     #if 0
-    if (TxData->hdrlen != 0)
-    {
-        puTxBuf = macp->txUsbBuf[freeTxUrb];
-        for (i = 0; i < len; i++)
-        {
-            printk("%02x ", puTxBuf[i]);
-            if (i % 16 == 15)
-                printk("\n");
-        }
-        printk("\n");
-    }
+    if (TxData->hdrlen != 0) {
+	puTxBuf = macp->txUsbBuf[freeTxUrb];
+	for (i = 0; i < len; i++) {
+		printk("%02x ", puTxBuf[i]);
+		if (i % 16 == 15)
+		printk("\n");
+		}
+		printk("\n");
+	}
     #endif
     #if 0
     /* For debug purpose */
-    if(TxData->hdr[9] & 0x40)
-    {
-        int i;
-        u16_t ctrlLen = TxData->hdr[0] + (TxData->hdr[1] << 8);
-
-        if (ctrlLen != len + 4)
-        {
-        /* Dump control setting */
-        for(i = 0; i < 8; i++)
-        {
-            printk(KERN_ERR "0x%02x ", TxData->hdr[i]);
-        }
-        printk(KERN_ERR "\n");
-
-        printk(KERN_ERR "ctrLen: %d, hdrLen: %d, snapLen: %d\n", ctrlLen, TxData->hdrlen, TxData->snapLen);
-        printk(KERN_ERR "bufLen: %d, tailLen: %d, len: %d\n", TxData->buf->len, TxData->tailLen, len);
-        }
+    if (TxData->hdr[9] & 0x40) {
+	int i;
+	u16_t ctrlLen = TxData->hdr[0] + (TxData->hdr[1] << 8);
+
+	if (ctrlLen != len + 4) {
+	/* Dump control setting */
+	for (i = 0; i < 8; i++) {
+		printk(KERN_ERR "0x%02x ", TxData->hdr[i]);
+	}
+	printk(KERN_ERR "\n");
+
+	printk(KERN_ERR "ctrLen: %d, hdrLen: %d, snapLen: %d\n", ctrlLen, TxData->hdrlen, TxData->snapLen);
+	printk(KERN_ERR "bufLen: %d, tailLen: %d, len: %d\n", TxData->buf->len, TxData->tailLen, len);
+	}
     }
     #endif
 
 #if ZM_USB_TX_STREAM_MODE == 1
-    // Add the Length and Tag
+    /* Add the Length and Tag*/
     len += 4;
 
-    //printk("%d packet, length: %d\n", ii+1, len);
+    /*printk("%d packet, length: %d\n", ii+1, len);*/
 
-    if (ii < (ZM_MAX_TX_AGGREGATE_NUM-1))
-    {
-        /* Pad the buffer to firmware descriptor boundary */
-        offset += (((len-1) / 4) + 1) * 4;
+    if (ii < (ZM_MAX_TX_AGGREGATE_NUM-1)) {
+	/* Pad the buffer to firmware descriptor boundary */
+	offset += (((len-1) / 4) + 1) * 4;
     }
 
-    if (ii == (ZM_MAX_TX_AGGREGATE_NUM-1))
-    {
-        len += offset;
+    if (ii == (ZM_MAX_TX_AGGREGATE_NUM-1)) {
+	len += offset;
     }
 
     TxQPool[ii] = TxData;
 
-    //DbgPrint("%d packet, offset: %d\n", ii+1, pUsbTxTransfer->offset);
+    /*DbgPrint("%d packet, offset: %d\n", ii+1, pUsbTxTransfer->offset);*/
 
     /* free packet */
-    //zfBufFree(dev, txData->buf);
+    /*zfBufFree(dev, txData->buf);*/
     }
 #endif
-    //printk("CWY - call zfwUsbSubmitBulkUrb(), len = 0x%d\n", len);
+    /*printk("CWY - call zfwUsbSubmitBulkUrb(), len = 0x%d\n", len);*/
     /* Submit a tx urb */
     ret = zfLnxUsbSubmitBulkUrb(macp->WlanTxDataUrb[freeTxUrb], macp->udev,
-            USB_WLAN_TX_PIPE, USB_DIR_OUT, macp->txUsbBuf[freeTxUrb],
-            len, zfLnxUsbDataOut_callback, dev);
-    //CWYang(-)
+	USB_WLAN_TX_PIPE, USB_DIR_OUT, macp->txUsbBuf[freeTxUrb],
+	len, zfLnxUsbDataOut_callback, dev);
+    /*CWYang(-)
     //if (ret != 0)
-    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);
+    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);*/
 
     /* free packet */
-    //dev_kfree_skb_any(TxData->buf);
+    /*dev_kfree_skb_any(TxData->buf);*/
 #if ZM_USB_TX_STREAM_MODE == 1
-    for(ii = 0; ii < usbTxAggCnt; ii++)
-        macp->usbCbFunctions.zfcbUsbOutComplete(dev, TxQPool[ii]->buf, 1, TxQPool[ii]->hdr);
+    for (ii = 0; ii < usbTxAggCnt; ii++)
+	macp->usbCbFunctions.zfcbUsbOutComplete(dev, TxQPool[ii]->buf, 1, TxQPool[ii]->hdr);
 #else
     macp->usbCbFunctions.zfcbUsbOutComplete(dev, TxData->buf, 1, TxData->hdr);
 #endif
@@ -761,23 +705,23 @@ u32_t zfLnxUsbSubmitTxData(zdev_t* dev)
 
 
 
-u32_t zfLnxUsbIn(zdev_t* dev, urb_t *urb, zbuf_t *buf)
+u32_t zfLnxUsbIn(zdev_t *dev, urb_t *urb, zbuf_t *buf)
 {
     u32_t ret;
     struct usbdrv_private *macp = dev->ml_priv;
 
     /* Submit a rx urb */
     ret = zfLnxUsbSubmitBulkUrb(urb, macp->udev, USB_WLAN_RX_PIPE,
-            USB_DIR_IN, buf->data, ZM_MAX_RX_BUFFER_SIZE,
-            zfLnxUsbDataIn_callback, dev);
-    //CWYang(-)
+	USB_DIR_IN, buf->data, ZM_MAX_RX_BUFFER_SIZE,
+	zfLnxUsbDataIn_callback, dev);
+    /*CWYang(-)
     //if (ret != 0)
-    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);
+    //    printk("zfwUsbSubmitBulkUrb fail, status: 0x%08x\n", (int)ret);*/
 
     return ret;
 }
 
-u32_t zfLnxUsbWriteReg(zdev_t* dev, u32_t* cmd, u16_t cmdLen)
+u32_t zfLnxUsbWriteReg(zdev_t *dev, u32_t *cmd, u16_t cmdLen)
 {
     struct usbdrv_private *macp = dev->ml_priv;
     u32_t ret;
@@ -785,7 +729,7 @@ u32_t zfLnxUsbWriteReg(zdev_t* dev, u32_t* cmd, u16_t cmdLen)
 #ifdef ZM_CONFIG_BIG_ENDIAN
     int ii = 0;
 
-    for(ii=0; ii<(cmdLen>>2); ii++)
+    for (ii = 0; ii < (cmdLen>>2); ii++)
 	cmd[ii] = cpu_to_le32(cmd[ii]);
 #endif
 
@@ -794,39 +738,38 @@ u32_t zfLnxUsbWriteReg(zdev_t* dev, u32_t* cmd, u16_t cmdLen)
     /* Issue an USB Out transfer */
     /* Submit a tx urb */
     ret = zfLnxUsbSubmitIntUrb(macp->RegOutUrb, macp->udev,
-            USB_REG_OUT_PIPE, USB_DIR_OUT, macp->regUsbWriteBuf,
-            cmdLen, zfLnxUsbRegOut_callback, dev, 1);
+	USB_REG_OUT_PIPE, USB_DIR_OUT, macp->regUsbWriteBuf,
+	cmdLen, zfLnxUsbRegOut_callback, dev, 1);
 
     return ret;
 }
 
 
-u32_t zfLnxUsbOut(zdev_t* dev, u8_t *hdr, u16_t hdrlen, u8_t *snap, u16_t snapLen,
-        u8_t *tail, u16_t tailLen, zbuf_t *buf, u16_t offset)
+u32_t zfLnxUsbOut(zdev_t *dev, u8_t *hdr, u16_t hdrlen, u8_t *snap, u16_t snapLen,
+	u8_t *tail, u16_t tailLen, zbuf_t *buf, u16_t offset)
 {
     u32_t ret;
     struct usbdrv_private *macp = dev->ml_priv;
 
     /* Check length of tail buffer */
-    //zm_assert((tailLen <= 16));
+    /*zm_assert((tailLen <= 16));*/
 
     /* Enqueue the packet into UsbTxBufQ */
-    if (zfLnxPutUsbTxBuffer(dev, hdr, hdrlen, snap, snapLen, tail, tailLen, buf, offset) == 0xffff)
-    {
-        /* free packet */
-        //printk("CWY - zfwPutUsbTxBuffer Error, free packet\n");
-        //dev_kfree_skb_any(buf);
-        macp->usbCbFunctions.zfcbUsbOutComplete(dev, buf, 0, hdr);
-        return 0xffff;
-    }
+    if (zfLnxPutUsbTxBuffer(dev, hdr, hdrlen, snap, snapLen, tail, tailLen, buf, offset) == 0xffff) {
+	/* free packet */
+	/*printk("CWY - zfwPutUsbTxBuffer Error, free packet\n");
+	//dev_kfree_skb_any(buf);*/
+	macp->usbCbFunctions.zfcbUsbOutComplete(dev, buf, 0, hdr);
+	return 0xffff;
+	}
 
-    //return 0;
-    //printk("CWY - call zfwUsbSubmitTxData()\n");
+    /*return 0;
+    //printk("CWY - call zfwUsbSubmitTxData()\n");*/
     ret = zfLnxUsbSubmitTxData(dev);
     return ret;
 }
 
-void zfLnxInitUsbTxQ(zdev_t* dev)
+void zfLnxInitUsbTxQ(zdev_t *dev)
 {
     struct usbdrv_private *macp = dev->ml_priv;
 
@@ -842,7 +785,7 @@ void zfLnxInitUsbTxQ(zdev_t* dev)
     macp->TxUrbCnt = ZM_MAX_TX_URB_NUM;
 }
 
-void zfLnxInitUsbRxQ(zdev_t* dev)
+void zfLnxInitUsbRxQ(zdev_t *dev)
 {
     u16_t i;
     zbuf_t *buf;
@@ -853,76 +796,65 @@ void zfLnxInitUsbRxQ(zdev_t* dev)
 
     macp->RxBufHead = 0;
 
-    for (i = 0; i < ZM_MAX_RX_URB_NUM; i++)
-    {
-        //buf = zfwBufAllocate(dev, ZM_MAX_RX_BUFFER_SIZE);
-        buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
-        macp->UsbRxBufQ[i] = buf;
-    }
+    for (i = 0; i < ZM_MAX_RX_URB_NUM; i++) {
+	/*buf = zfwBufAllocate(dev, ZM_MAX_RX_BUFFER_SIZE);*/
+	buf = dev_alloc_skb(ZM_MAX_RX_BUFFER_SIZE);
+	macp->UsbRxBufQ[i] = buf;
+	}
 
-    //macp->RxBufTail = ZM_MAX_RX_URB_NUM - 1;
+    /*macp->RxBufTail = ZM_MAX_RX_URB_NUM - 1;*/
     macp->RxBufTail = 0;
 
     /* Submit all Rx urbs */
-    for (i = 0; i < ZM_MAX_RX_URB_NUM; i++)
-    {
-        zfLnxPutUsbRxBuffer(dev, macp->UsbRxBufQ[i]);
-        zfLnxUsbIn(dev, macp->WlanRxDataUrb[i], macp->UsbRxBufQ[i]);
-    }
+    for (i = 0; i < ZM_MAX_RX_URB_NUM; i++) {
+	zfLnxPutUsbRxBuffer(dev, macp->UsbRxBufQ[i]);
+	zfLnxUsbIn(dev, macp->WlanRxDataUrb[i], macp->UsbRxBufQ[i]);
+	}
 }
 
 
 
 u32_t zfLnxUsbSubmitBulkUrb(urb_t *urb, struct usb_device *usb, u16_t epnum, u16_t direction,
-        void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context)
+	void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context)
 {
     u32_t ret;
 
-    if(direction == USB_DIR_OUT)
-    {
-        usb_fill_bulk_urb(urb, usb, usb_sndbulkpipe(usb, epnum),
-                transfer_buffer, buffer_length, complete, context);
+    if (direction == USB_DIR_OUT) {
+	usb_fill_bulk_urb(urb, usb, usb_sndbulkpipe(usb, epnum),
+		transfer_buffer, buffer_length, complete, context);
 
-        urb->transfer_flags |= URB_ZERO_PACKET;
-    }
-    else
-    {
-        usb_fill_bulk_urb(urb, usb, usb_rcvbulkpipe(usb, epnum),
-                transfer_buffer, buffer_length, complete, context);
+	urb->transfer_flags |= URB_ZERO_PACKET;
+    } else {
+	usb_fill_bulk_urb(urb, usb, usb_rcvbulkpipe(usb, epnum),
+		transfer_buffer, buffer_length, complete, context);
     }
 
-    if (epnum == 4)
-    {
-        if (urb->hcpriv)
-        {
-            //printk("CWY - urb->hcpriv set by unknown reason, reset it\n");
-            //urb->hcpriv = 0;
-        }
-    }
+    if (epnum == 4) {
+	if (urb->hcpriv) {
+		/*printk("CWY - urb->hcpriv set by unknown reason, reset it\n");
+		//urb->hcpriv = 0;*/
+		}
+	}
 
     ret = usb_submit_urb(urb, GFP_ATOMIC);
-    if ((epnum == 4) & (ret != 0))
-    {
-        //printk("CWY - ret = %x\n", ret);
+    if ((epnum == 4) & (ret != 0)) {
+	/*printk("CWY - ret = %x\n", ret);*/
     }
     return ret;
 }
 
 u32_t zfLnxUsbSubmitIntUrb(urb_t *urb, struct usb_device *usb, u16_t epnum, u16_t direction,
-        void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context,
-        u32_t interval)
+	void *transfer_buffer, int buffer_length, usb_complete_t complete, void *context,
+	u32_t interval)
 {
     u32_t ret;
 
-    if(direction == USB_DIR_OUT)
-    {
-        usb_fill_int_urb(urb, usb, usb_sndbulkpipe(usb, epnum),
-                transfer_buffer, buffer_length, complete, context, interval);
-    }
-    else
-    {
-        usb_fill_int_urb(urb, usb, usb_rcvbulkpipe(usb, epnum),
-                transfer_buffer, buffer_length, complete, context, interval);
+    if (direction == USB_DIR_OUT) {
+	usb_fill_int_urb(urb, usb, usb_sndbulkpipe(usb, epnum),
+		transfer_buffer, buffer_length, complete, context, interval);
+    } else {
+	usb_fill_int_urb(urb, usb, usb_rcvbulkpipe(usb, epnum),
+	transfer_buffer, buffer_length, complete, context, interval);
     }
 
     ret = usb_submit_urb(urb, GFP_ATOMIC);
@@ -946,51 +878,48 @@ int zfLnxCencSendMsg(struct sock *netlink_sk, u_int8_t *msg, int len)
 	size = NLMSG_SPACE(len);
 	skb = alloc_skb(size, GFP_ATOMIC);
 
-	if(skb == NULL)
-	{
+	if (skb == NULL) {
 		printk("dev_alloc_skb failure \n");
 		goto out;
 	}
 	old_tail = skb->tail;
 
-	/*ÌîдÊý¾Ý±¨Ïà¹ØÐÅÏ¢*/
+	/* */
 	nlh = NLMSG_PUT(skb, 0, 0, WAI_K_MSG, size-sizeof(*nlh));
 	pos = NLMSG_DATA(nlh);
 
-	/*´«Êäµ½Óû§¿Õ¼äµÄÊý¾Ý*/
+	/* */
 	memcpy(pos, msg,  len);
-	/*¼ÆËã¾­¹ý×Ö½Ú¶ÔÆäºóµÄÊý¾Ýʵ¼Ê³¤¶È*/
+	/* */
 	nlh->nlmsg_len = skb->tail - old_tail;
 	NETLINK_CB(skb).dst_group = COMMTYPE_GROUP;
 	netlink_broadcast(netlink_sk, skb, 0, COMMTYPE_GROUP, GFP_ATOMIC);
 	ret = 0;
 out:
 	return ret;
-nlmsg_failure: /*NLMSG_PUT ʧ°Ü£¬Ôò³·ÏúÌ×½Ó×Ö»º´æ*/
+nlmsg_failure: /* */
 	kfree_skb(skb);
 	goto out;
 
 #undef COMMTYPE_GROUP
 #undef WAI_K_MSG
 }
-#endif //ZM_ENABLE_CENC
+#endif /*ZM_ENABLE_CENC*/
 
 /* Simply return 0xffff if VAP function is not supported */
-u16_t zfLnxGetVapId(zdev_t* dev)
+u16_t zfLnxGetVapId(zdev_t *dev)
 {
     u16_t i;
 
-    for (i=0; i<ZM_VAP_PORT_NUMBER; i++)
-    {
-        if (vap[i].dev == dev)
-        {
-            return i;
-        }
-    }
-    return 0xffff;
+    for (i = 0; i < ZM_VAP_PORT_NUMBER; i++) {
+	if (vap[i].dev == dev) {
+		return i;
+		}
+	}
+	return 0xffff;
 }
 
-u32_t zfwReadReg(zdev_t* dev, u32_t offset)
+u32_t zfwReadReg(zdev_t *dev, u32_t offset)
 {
     return 0;
 }
@@ -1012,25 +941,23 @@ u32_t smp_kevent_Lock = 0;
 void kevent(struct work_struct *work)
 {
     struct usbdrv_private *macp =
-               container_of(work, struct usbdrv_private, kevent);
-    zdev_t *dev = macp->device;
+	container_of(work, struct usbdrv_private, kevent);
+	zdev_t *dev = macp->device;
 
-    if (test_and_set_bit(0, (void *)&smp_kevent_Lock))
-    {
-        //schedule_work(&macp->kevent);
-        return;
+    if (test_and_set_bit(0, (void *)&smp_kevent_Lock)) {
+	/*schedule_work(&macp->kevent);*/
+	return;
     }
 
     down(&macp->ioctl_sem);
 
-    if (test_and_clear_bit(KEVENT_WATCHDOG, &macp->kevent_flags))
-    {
+    if (test_and_clear_bit(KEVENT_WATCHDOG, &macp->kevent_flags)) {
     extern u16_t zfHpStartRecv(zdev_t *dev);
-        //zfiHwWatchDogReinit(dev);
-        printk(("\n ************ Hw watchDog occur!! ************** \n"));
-        zfiWlanSuspend(dev);
-        zfiWlanResume(dev,0);
-        zfHpStartRecv(dev);
+	/*zfiHwWatchDogReinit(dev);*/
+	printk(("\n ************ Hw watchDog occur!! ************** \n"));
+	zfiWlanSuspend(dev);
+	zfiWlanResume(dev , 0);
+	zfHpStartRecv(dev);
     }
 
     clear_bit(0, (void *)&smp_kevent_Lock);
@@ -1083,41 +1010,38 @@ void zfLnxSignalThread(zdev_t *dev, int flag)
 {
     struct usbdrv_private *macp = dev->ml_priv;
 
-    if (macp == NULL)
-    {
-        printk("macp is NULL\n");
-        return;
+    if (macp == NULL) {
+	printk("macp is NULL\n");
+	return;
     }
 
-    if (0 && macp->kevent_ready != 1)
-    {
-        printk("Kevent not ready\n");
-        return;
+    if (0 && macp->kevent_ready != 1) {
+	printk("Kevent not ready\n");
+	return;
     }
 
     set_bit(flag, &macp->kevent_flags);
 
-    if (!schedule_work(&macp->kevent))
-    {
-        //Fails is Normal
-        //printk(KERN_ERR "schedule_task failed, flag = %x\n", flag);
-    }
+    if (!schedule_work(&macp->kevent)) {
+	/*Fails is Normal
+	//printk(KERN_ERR "schedule_task failed, flag = %x\n", flag);*/
+	}
 }
 
 /* Notify wrapper todo redownload firmware and reinit procedure when */
 /* hardware watchdog occur : zfiHwWatchDogReinit() */
-void zfLnxWatchDogNotify(zdev_t* dev)
+void zfLnxWatchDogNotify(zdev_t *dev)
 {
     zfLnxSignalThread(dev, KEVENT_WATCHDOG);
 }
 
 /* Query Durantion of Active Scan */
-void zfwGetActiveScanDur(zdev_t* dev, u8_t* Dur)
+void zfwGetActiveScanDur(zdev_t *dev, u8_t *Dur)
 {
-    *Dur = 30; // default 30 ms
+    *Dur = 30; /* default 30 ms*/
 }
 
-void zfwGetShowZeroLengthSSID(zdev_t* dev, u8_t* Dur)
+void zfwGetShowZeroLengthSSID(zdev_t *dev, u8_t *Dur)
 {
     *Dur = 0;
 }
diff --git a/drivers/staging/otus/zdusb.c b/drivers/staging/otus/zdusb.c
index 2c799a25029..4014b747245 100644
--- a/drivers/staging/otus/zdusb.c
+++ b/drivers/staging/otus/zdusb.c
@@ -48,7 +48,7 @@ static const char driver_name[] = "Otus";
 /* table of devices that work with this driver */
 static const struct usb_device_id zd1221_ids[] = {
 	{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
-        { USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
+	{ USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
 	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
 	{ USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
 	{ }					/* Terminating entry */
@@ -60,9 +60,9 @@ extern u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp);
 extern int usbdrv_close(struct net_device *dev);
 extern u8_t zfLnxClearStructs(struct net_device *dev);
 extern int zfWdsClose(struct net_device *dev);
-extern int zfUnregisterWdsDev(struct net_device* parentDev, u16_t wdsId);
+extern int zfUnregisterWdsDev(struct net_device *parentDev, u16_t wdsId);
 extern int zfLnxVapClose(struct net_device *dev);
-extern int zfLnxUnregisterVapDev(struct net_device* parentDev, u16_t vapId);
+extern int zfLnxUnregisterVapDev(struct net_device *parentDev, u16_t vapId);
 
 /* WDS */
 extern struct zsWdsStruct wds[ZM_WDS_PORT_NUMBER];
@@ -73,148 +73,135 @@ extern struct zsVapStruct vap[ZM_VAP_PORT_NUMBER];
 static int zfLnxProbe(struct usb_interface *interface,
 	const struct usb_device_id *id)
 {
-    struct usb_device *dev = interface_to_usbdev(interface);
-
-    struct net_device *net = NULL;
-    struct usbdrv_private *macp = NULL;
-    int vendor_id, product_id;
-    int result = 0;
-
-    usb_get_dev(dev);
-
-    vendor_id = dev->descriptor.idVendor;
-    product_id = dev->descriptor.idProduct;
-
-#ifdef HMAC_DEBUG
-    printk(KERN_NOTICE "vendor_id = %04x\n", vendor_id);
-    printk(KERN_NOTICE "product_id = %04x\n", product_id);
-
-    if (dev->speed == USB_SPEED_HIGH)
-        printk(KERN_NOTICE "USB 2.0 Host\n");
-    else
-        printk(KERN_NOTICE "USB 1.1 Host\n");
-#endif
-
-    macp = kzalloc(sizeof(struct usbdrv_private), GFP_KERNEL);
-    if (!macp)
-    {
-        printk(KERN_ERR "out of memory allocating device structure\n");
-        result = -ENOMEM;
-        goto fail;
-    }
-
-    net = alloc_etherdev(0);
-
-    if (net == NULL)
-    {
-        printk(KERN_ERR "zfLnxProbe: Not able to alloc etherdev struct\n");
-        result = -ENOMEM;
-        goto fail1;
-    }
-
-    strcpy(net->name, "ath%d");
-
-    net->ml_priv = macp;   //kernel 2.6
-    macp->udev = dev;
-    macp->device = net;
-
-    /* set up the endpoint information */
-    /* check out the endpoints */
-    macp->interface = interface;
-
-    //init_waitqueue_head(&macp->regSet_wait);
-    //init_waitqueue_head(&macp->iorwRsp_wait);
-    //init_waitqueue_head(&macp->term_wait);
-
-    if (!zfLnxAllocAllUrbs(macp))
-    {
-        result = -ENOMEM;
-        goto fail2;
-    }
-
-    if (!zfLnxInitSetup(net, macp))
-    {
-        result = -EIO;
-        goto fail3;
-    }
-    else
-    {
-        usb_set_intfdata(interface, macp);
-        SET_NETDEV_DEV(net, &interface->dev);
-
-        if (register_netdev(net) != 0)
-        {
-            usb_set_intfdata(interface, NULL);
-            goto fail3;
-        }
-    }
-
-    netif_carrier_off(net);
-    goto done;
-
+	struct usb_device *dev = interface_to_usbdev(interface);
+
+	struct net_device *net = NULL;
+	struct usbdrv_private *macp = NULL;
+	int vendor_id, product_id;
+	int result = 0;
+
+	usb_get_dev(dev);
+
+	vendor_id = dev->descriptor.idVendor;
+	product_id = dev->descriptor.idProduct;
+
+	#ifdef HMAC_DEBUG
+		printk(KERN_NOTICE "vendor_id = %04x\n", vendor_id);
+		printk(KERN_NOTICE "product_id = %04x\n", product_id);
+
+	if (dev->speed == USB_SPEED_HIGH)
+		printk(KERN_NOTICE "USB 2.0 Host\n");
+	else
+		printk(KERN_NOTICE "USB 1.1 Host\n");
+	#endif
+
+	macp = kzalloc(sizeof(struct usbdrv_private), GFP_KERNEL);
+	if (!macp) {
+		printk(KERN_ERR "out of memory allocating device structure\n");
+		result = -ENOMEM;
+		goto fail;
+	}
+
+	net = alloc_etherdev(0);
+
+	if (net == NULL) {
+		printk(KERN_ERR "zfLnxProbe: Not able to alloc etherdev struct\n");
+		result = -ENOMEM;
+		goto fail1;
+	}
+
+	strcpy(net->name, "ath%d");
+
+	net->ml_priv = macp;   /* kernel 2.6 */
+	macp->udev = dev;
+	macp->device = net;
+
+	/* set up the endpoint information */
+	/* check out the endpoints */
+	macp->interface = interface;
+
+	/* init_waitqueue_head(&macp->regSet_wait); */
+	/* init_waitqueue_head(&macp->iorwRsp_wait); */
+	/* init_waitqueue_head(&macp->term_wait); */
+
+	if (!zfLnxAllocAllUrbs(macp)) {
+		result = -ENOMEM;
+		goto fail2;
+	}
+
+	if (!zfLnxInitSetup(net, macp)) {
+		result = -EIO;
+		goto fail3;
+	} else {
+		usb_set_intfdata(interface, macp);
+		SET_NETDEV_DEV(net, &interface->dev);
+
+		if (register_netdev(net) != 0) {
+			usb_set_intfdata(interface, NULL);
+			goto fail3;
+		}
+	}
+
+	netif_carrier_off(net);
+	    goto done;
 fail3:
-    zfLnxFreeAllUrbs(macp);
+	zfLnxFreeAllUrbs(macp);
 fail2:
-    free_netdev(net);  //kernel 2.6
+	free_netdev(net);  /* kernel 2.6 */
 fail1:
-    kfree(macp);
-
+	kfree(macp);
 fail:
-    usb_put_dev(dev);
-    macp = NULL;
-
+	usb_put_dev(dev);
+	macp = NULL;
 done:
-    return result;
+	return result;
 }
 
 static void zfLnxDisconnect(struct usb_interface *interface)
 {
-    struct usbdrv_private *macp = (struct usbdrv_private *) usb_get_intfdata(interface);
-
-    printk(KERN_DEBUG "zfLnxDisconnect\n");
-
-    if (!macp)
-    {
-        printk(KERN_ERR "unregistering non-existant device\n");
-        return;
-    }
-
-    if (macp->driver_isolated)
-    {
-        if (macp->device->flags & IFF_UP)
-            usbdrv_close(macp->device);
-    }
-
-#if 0
-    /* Close WDS */
-    //zfWdsClose(wds[0].dev);
-    /* Unregister WDS */
-    //zfUnregisterWdsDev(macp->device, 0);
-
-    /* Close VAP */
-    zfLnxVapClose(vap[0].dev);
-    /* Unregister VAP */
-    zfLnxUnregisterVapDev(macp->device, 0);
-#endif
+	struct usbdrv_private *macp = (struct usbdrv_private *) usb_get_intfdata(interface);
+
+	printk(KERN_DEBUG "zfLnxDisconnect\n");
+
+	if (!macp) {
+		printk(KERN_ERR "unregistering non-existant device\n");
+		return;
+	}
+
+	if (macp->driver_isolated)
+		if (macp->device->flags & IFF_UP)
+			usbdrv_close(macp->device);
+
+	#if 0
+		/* Close WDS */
+		/* zfWdsClose(wds[0].dev); */
+		/* Unregister WDS */
+		/* zfUnregisterWdsDev(macp->device, 0); */
+
+		/* Close VAP */
+		zfLnxVapClose(vap[0].dev);
+		/* Unregister VAP */
+		zfLnxUnregisterVapDev(macp->device, 0);
+	#endif
 
-    zfLnxClearStructs(macp->device);
+	zfLnxClearStructs(macp->device);
 
-    unregister_netdev(macp->device);
+	unregister_netdev(macp->device);
 
-    usb_put_dev(interface_to_usbdev(interface));
+	usb_put_dev(interface_to_usbdev(interface));
 
-    //printk(KERN_ERR "3. zfLnxUnlinkAllUrbs\n");
-    //zfLnxUnlinkAllUrbs(macp);
+	/* printk(KERN_ERR "3. zfLnxUnlinkAllUrbs\n"); */
+	/* zfLnxUnlinkAllUrbs(macp); */
 
-    /* Free network interface */
-    free_netdev(macp->device);
+	/* Free network interface */
+	free_netdev(macp->device);
 
-    zfLnxFreeAllUrbs(macp);
-    //zfLnxClearStructs(macp->device);
-    kfree(macp);
-    macp = NULL;
+	zfLnxFreeAllUrbs(macp);
+	/* zfLnxClearStructs(macp->device); */
+	kfree(macp);
+	macp = NULL;
 
-    usb_set_intfdata(interface, NULL);
+	usb_set_intfdata(interface, NULL);
 }
 
 static struct usb_driver zd1221_driver = {
@@ -226,13 +213,13 @@ static struct usb_driver zd1221_driver = {
 
 int __init zfLnxIinit(void)
 {
-    printk(KERN_NOTICE "%s - version %s\n",  DRIVER_NAME, VERSIONID);
-    return usb_register(&zd1221_driver);
+	printk(KERN_NOTICE "%s - version %s\n",  DRIVER_NAME, VERSIONID);
+	return usb_register(&zd1221_driver);
 }
 
 void __exit zfLnxExit(void)
 {
-    usb_deregister(&zd1221_driver);
+	usb_deregister(&zd1221_driver);
 }
 
 module_init(zfLnxIinit);
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 9ca0e9e2a96..3221814a856 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -48,6 +48,7 @@
 #include <linux/fcntl.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/parport.h>
 #include <linux/version.h>
@@ -68,11 +69,16 @@
 #define LCD_MAXBYTES		256	/* max burst write */
 
 #define KEYPAD_BUFFER		64
-#define INPUT_POLL_TIME		(HZ/50)	/* poll the keyboard this every second */
-#define KEYPAD_REP_START	(10)	/* a key starts to repeat after this times INPUT_POLL_TIME */
-#define KEYPAD_REP_DELAY	(2)	/* a key repeats this times INPUT_POLL_TIME */
 
-#define FLASH_LIGHT_TEMPO	(200)	/* keep the light on this times INPUT_POLL_TIME for each flash */
+/* poll the keyboard this every second */
+#define INPUT_POLL_TIME		(HZ/50)
+/* a key starts to repeat after this times INPUT_POLL_TIME */
+#define KEYPAD_REP_START	(10)
+/* a key repeats this times INPUT_POLL_TIME */
+#define KEYPAD_REP_DELAY	(2)
+
+/* keep the light on this times INPUT_POLL_TIME for each flash */
+#define FLASH_LIGHT_TEMPO	(200)
 
 /* converts an r_str() input to an active high, bits string : 000BAOSE */
 #define PNL_PINPUT(a)		((((unsigned char)(a)) ^ 0x7F) >> 3)
@@ -84,7 +90,8 @@
 #define PNL_PERRORP		0x08	/* direct input, active low */
 
 #define PNL_PBIDIR		0x20	/* bi-directional ports */
-#define PNL_PINTEN		0x10	/* high to read data in or-ed with data out */
+/* high to read data in or-ed with data out */
+#define PNL_PINTEN		0x10
 #define PNL_PSELECP		0x08	/* inverted output, active low */
 #define PNL_PINITP		0x04	/* direct output, active low */
 #define PNL_PAUTOLF		0x02	/* inverted output, active low */
@@ -123,7 +130,7 @@
 #define LCD_FLAG_N		0x0040	/* 2-rows mode */
 #define LCD_FLAG_L		0x0080	/* backlight enabled */
 
-#define LCD_ESCAPE_LEN		24	/* 24 chars max for an LCD escape command */
+#define LCD_ESCAPE_LEN		24	/* max chars for LCD escape command */
 #define LCD_ESCAPE_CHAR	27	/* use char 27 for escape command */
 
 /* macros to simplify use of the parallel port */
@@ -134,8 +141,10 @@
 #define w_dtr(x, y)     do { parport_write_data((x)->port, (y)); } while (0)
 
 /* this defines which bits are to be used and which ones to be ignored */
-static __u8 scan_mask_o;	/* logical or of the output bits involved in the scan matrix */
-static __u8 scan_mask_i;	/* logical or of the input bits involved in the scan matrix */
+/* logical or of the output bits involved in the scan matrix */
+static __u8 scan_mask_o;
+/* logical or of the input bits involved in the scan matrix */
+static __u8 scan_mask_i;
 
 typedef __u64 pmask_t;
 
@@ -161,14 +170,14 @@ struct logical_input {
 	__u8 rise_timer, fall_timer, high_timer;
 
 	union {
-		struct {	/* this structure is valid when type == INPUT_TYPE_STD */
+		struct {	/* valid when type == INPUT_TYPE_STD */
 			void (*press_fct) (int);
 			void (*release_fct) (int);
 			int press_data;
 			int release_data;
 		} std;
-		struct {	/* this structure is valid when type == INPUT_TYPE_KBD */
-			/* strings can be full-length (ie. non null-terminated) */
+		struct {	/* valid when type == INPUT_TYPE_KBD */
+			/* strings can be non null-terminated */
 			char press_str[sizeof(void *) + sizeof(int)];
 			char repeat_str[sizeof(void *) + sizeof(int)];
 			char release_str[sizeof(void *) + sizeof(int)];
@@ -188,11 +197,17 @@ LIST_HEAD(logical_inputs);	/* list of all defined logical inputs */
  * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
  * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
  */
-static pmask_t phys_read;	/* what has just been read from the I/O ports */
-static pmask_t phys_read_prev;	/* previous phys_read */
-static pmask_t phys_curr;	/* stabilized phys_read (phys_read|phys_read_prev) */
-static pmask_t phys_prev;	/* previous phys_curr */
-static char inputs_stable;	/* 0 means that at least one logical signal needs be computed */
+
+/* what has just been read from the I/O ports */
+static pmask_t phys_read;
+/* previous phys_read */
+static pmask_t phys_read_prev;
+/* stabilized phys_read (phys_read|phys_read_prev) */
+static pmask_t phys_curr;
+/* previous phys_curr */
+static pmask_t phys_prev;
+/* 0 means that at least one logical signal needs be computed */
+static char inputs_stable;
 
 /* these variables are specific to the keypad */
 static char keypad_buffer[KEYPAD_BUFFER];
@@ -202,11 +217,17 @@ static char keypressed;
 static wait_queue_head_t keypad_read_wait;
 
 /* lcd-specific variables */
-static unsigned long int lcd_flags;	/* contains the LCD config state */
-static unsigned long int lcd_addr_x;	/* contains the LCD X offset */
-static unsigned long int lcd_addr_y;	/* contains the LCD Y offset */
-static char lcd_escape[LCD_ESCAPE_LEN + 1];	/* current escape sequence, 0 terminated */
-static int lcd_escape_len = -1;	/* not in escape state. >=0 = escape cmd len */
+
+/* contains the LCD config state */
+static unsigned long int lcd_flags;
+/* contains the LCD X offset */
+static unsigned long int lcd_addr_x;
+/* contains the LCD Y offset */
+static unsigned long int lcd_addr_y;
+/* current escape sequence, 0 terminated */
+static char lcd_escape[LCD_ESCAPE_LEN + 1];
+/* not in escape state. >=0 = escape cmd len */
+static int lcd_escape_len = -1;
 
 /*
  * Bit masks to convert LCD signals to parallel port outputs.
@@ -436,11 +457,13 @@ MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
 static int lcd_type = -1;
 module_param(lcd_type, int, 0000);
 MODULE_PARM_DESC(lcd_type,
-		 "LCD type: 0=none, 1=old //, 2=serial ks0074, 3=hantronix //, 4=nexcom //, 5=compiled-in");
+		 "LCD type: 0=none, 1=old //, 2=serial ks0074, "
+		 "3=hantronix //, 4=nexcom //, 5=compiled-in");
 
 static int lcd_proto = -1;
 module_param(lcd_proto, int, 0000);
-MODULE_PARM_DESC(lcd_proto, "LCD communication: 0=parallel (//), 1=serial,"
+MODULE_PARM_DESC(lcd_proto,
+		"LCD communication: 0=parallel (//), 1=serial,"
 		"2=TI LCD Interface");
 
 static int lcd_charset = -1;
@@ -450,12 +473,14 @@ MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
 static int keypad_type = -1;
 module_param(keypad_type, int, 0000);
 MODULE_PARM_DESC(keypad_type,
-		 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
+		 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, "
+		 "3=nexcom 4 keys");
 
 static int profile = DEFAULT_PROFILE;
 module_param(profile, int, 0000);
 MODULE_PARM_DESC(profile,
-		 "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; 4=16x2 nexcom; default=40x2, old kp");
+		 "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
+		 "4=16x2 nexcom; default=40x2, old kp");
 
 /*
  * These are the parallel port pins the LCD control signals are connected to.
@@ -469,32 +494,38 @@ MODULE_PARM_DESC(profile,
 static int lcd_e_pin  = PIN_NOT_SET;
 module_param(lcd_e_pin, int, 0000);
 MODULE_PARM_DESC(lcd_e_pin,
-		 "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");
+		 "# of the // port pin connected to LCD 'E' signal, "
+		 "with polarity (-17..17)");
 
 static int lcd_rs_pin = PIN_NOT_SET;
 module_param(lcd_rs_pin, int, 0000);
 MODULE_PARM_DESC(lcd_rs_pin,
-		 "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");
+		 "# of the // port pin connected to LCD 'RS' signal, "
+		 "with polarity (-17..17)");
 
 static int lcd_rw_pin = PIN_NOT_SET;
 module_param(lcd_rw_pin, int, 0000);
 MODULE_PARM_DESC(lcd_rw_pin,
-		 "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
+		 "# of the // port pin connected to LCD 'RW' signal, "
+		 "with polarity (-17..17)");
 
 static int lcd_bl_pin = PIN_NOT_SET;
 module_param(lcd_bl_pin, int, 0000);
 MODULE_PARM_DESC(lcd_bl_pin,
-		 "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+		 "# of the // port pin connected to LCD backlight, "
+		 "with polarity (-17..17)");
 
 static int lcd_da_pin = PIN_NOT_SET;
 module_param(lcd_da_pin, int, 0000);
 MODULE_PARM_DESC(lcd_da_pin,
-		 "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
+		 "# of the // port pin connected to serial LCD 'SDA' "
+		 "signal, with polarity (-17..17)");
 
 static int lcd_cl_pin = PIN_NOT_SET;
 module_param(lcd_cl_pin, int, 0000);
 MODULE_PARM_DESC(lcd_cl_pin,
-		 "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
+		 "# of the // port pin connected to serial LCD 'SCL' "
+		 "signal, with polarity (-17..17)");
 
 static unsigned char *lcd_char_conv;
 
@@ -572,12 +603,12 @@ static char (*keypad_profile)[4][9] = old_keypad_profile;
 
 /* FIXME: this should be converted to a bit array containing signals states */
 static struct {
-	unsigned char e;	/* parallel LCD E   (data latch on falling edge) */
-	unsigned char rs;	/* parallel LCD RS  (0 = cmd, 1 = data) */
-	unsigned char rw;	/* parallel LCD R/W (0 = W, 1 = R) */
-	unsigned char bl;	/* parallel LCD backlight (0 = off, 1 = on) */
-	unsigned char cl;	/* serial LCD clock (latch on rising edge) */
-	unsigned char da;	/* serial LCD data */
+	unsigned char e;  /* parallel LCD E (data latch on falling edge) */
+	unsigned char rs; /* parallel LCD RS  (0 = cmd, 1 = data) */
+	unsigned char rw; /* parallel LCD R/W (0 = W, 1 = R) */
+	unsigned char bl; /* parallel LCD backlight (0 = off, 1 = on) */
+	unsigned char cl; /* serial LCD clock (latch on rising edge) */
+	unsigned char da; /* serial LCD data */
 } bits;
 
 static void init_scan_timer(void);
@@ -666,7 +697,7 @@ void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val)
 		c_bit = PNL_PAUTOLF;
 		inv = !inv;
 		break;
-	case PIN_INITP:	/* init, direct */
+	case PIN_INITP:		/* init, direct */
 		c_bit = PNL_PINITP;
 		break;
 	case PIN_SELECP:	/* select_in, inverted */
@@ -698,23 +729,23 @@ static void long_sleep(int ms)
 	}
 }
 
-/* send a serial byte to the LCD panel. The caller is responsible for locking if needed. */
+/* send a serial byte to the LCD panel. The caller is responsible for locking
+   if needed. */
 static void lcd_send_serial(int byte)
 {
 	int bit;
 
 	/* the data bit is set on D0, and the clock on STROBE.
-	 * LCD reads D0 on STROBE's rising edge.
-	 */
+	 * LCD reads D0 on STROBE's rising edge. */
 	for (bit = 0; bit < 8; bit++) {
 		bits.cl = BIT_CLR;	/* CLK low */
 		panel_set_bits();
 		bits.da = byte & 1;
 		panel_set_bits();
-		udelay(2);	/* maintain the data during 2 us before CLK up */
+		udelay(2);  /* maintain the data during 2 us before CLK up */
 		bits.cl = BIT_SET;	/* CLK high */
 		panel_set_bits();
-		udelay(1);	/* maintain the strobe during 1 us */
+		udelay(1);  /* maintain the strobe during 1 us */
 		byte >>= 1;
 	}
 }
@@ -760,19 +791,19 @@ static void lcd_write_cmd_p8(int cmd)
 	spin_lock(&pprt_lock);
 	/* present the data to the data port */
 	w_dtr(pprt, cmd);
-	udelay(20);		/* maintain the data during 20 us before the strobe */
+	udelay(20);	/* maintain the data during 20 us before the strobe */
 
 	bits.e = BIT_SET;
 	bits.rs = BIT_CLR;
 	bits.rw = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(40);		/* maintain the strobe during 40 us */
+	udelay(40);	/* maintain the strobe during 40 us */
 
 	bits.e = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(120);		/* the shortest command takes at least 120 us */
+	udelay(120);	/* the shortest command takes at least 120 us */
 	spin_unlock(&pprt_lock);
 }
 
@@ -782,19 +813,19 @@ static void lcd_write_data_p8(int data)
 	spin_lock(&pprt_lock);
 	/* present the data to the data port */
 	w_dtr(pprt, data);
-	udelay(20);		/* maintain the data during 20 us before the strobe */
+	udelay(20);	/* maintain the data during 20 us before the strobe */
 
 	bits.e = BIT_SET;
 	bits.rs = BIT_SET;
 	bits.rw = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(40);		/* maintain the strobe during 40 us */
+	udelay(40);	/* maintain the strobe during 40 us */
 
 	bits.e = BIT_CLR;
 	set_ctrl_bits();
 
-	udelay(45);		/* the shortest data takes at least 45 us */
+	udelay(45);	/* the shortest data takes at least 45 us */
 	spin_unlock(&pprt_lock);
 }
 
@@ -822,7 +853,8 @@ static void lcd_gotoxy(void)
 {
 	lcd_write_cmd(0x80	/* set DDRAM address */
 		      | (lcd_addr_y ? lcd_hwidth : 0)
-		      /* we force the cursor to stay at the end of the line if it wants to go farther */
+		      /* we force the cursor to stay at the end of the
+			 line if it wants to go farther */
 		      | ((lcd_addr_x < lcd_bwidth) ? lcd_addr_x &
 			 (lcd_hwidth - 1) : lcd_bwidth - 1));
 }
@@ -871,19 +903,23 @@ static void lcd_clear_fast_p8(void)
 	for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
 		/* present the data to the data port */
 		w_dtr(pprt, ' ');
-		udelay(20);	/* maintain the data during 20 us before the strobe */
+
+		/* maintain the data during 20 us before the strobe */
+		udelay(20);
 
 		bits.e = BIT_SET;
 		bits.rs = BIT_SET;
 		bits.rw = BIT_CLR;
 		set_ctrl_bits();
 
-		udelay(40);	/* maintain the strobe during 40 us */
+		/* maintain the strobe during 40 us */
+		udelay(40);
 
 		bits.e = BIT_CLR;
 		set_ctrl_bits();
 
-		udelay(45);	/* the shortest data takes at least 45 us */
+		/* the shortest data takes at least 45 us */
+		udelay(45);
 	}
 	spin_unlock(&pprt_lock);
 
@@ -954,7 +990,8 @@ static void lcd_init_display(void)
 
 	long_sleep(10);
 
-	lcd_write_cmd(0x06);	/* entry mode set : increment, cursor shifting */
+	/* entry mode set : increment, cursor shifting */
+	lcd_write_cmd(0x06);
 
 	lcd_clear_display();
 }
@@ -966,317 +1003,336 @@ static void lcd_init_display(void)
  *
  */
 
+static inline int handle_lcd_special_code(void)
+{
+	/* LCD special codes */
+
+	int processed = 0;
+
+	char *esc = lcd_escape + 2;
+	int oldflags = lcd_flags;
+
+	/* check for display mode flags */
+	switch (*esc) {
+	case 'D':	/* Display ON */
+		lcd_flags |= LCD_FLAG_D;
+		processed = 1;
+		break;
+	case 'd':	/* Display OFF */
+		lcd_flags &= ~LCD_FLAG_D;
+		processed = 1;
+		break;
+	case 'C':	/* Cursor ON */
+		lcd_flags |= LCD_FLAG_C;
+		processed = 1;
+		break;
+	case 'c':	/* Cursor OFF */
+		lcd_flags &= ~LCD_FLAG_C;
+		processed = 1;
+		break;
+	case 'B':	/* Blink ON */
+		lcd_flags |= LCD_FLAG_B;
+		processed = 1;
+		break;
+	case 'b':	/* Blink OFF */
+		lcd_flags &= ~LCD_FLAG_B;
+		processed = 1;
+		break;
+	case '+':	/* Back light ON */
+		lcd_flags |= LCD_FLAG_L;
+		processed = 1;
+		break;
+	case '-':	/* Back light OFF */
+		lcd_flags &= ~LCD_FLAG_L;
+		processed = 1;
+		break;
+	case '*':
+		/* flash back light using the keypad timer */
+		if (scan_timer.function != NULL) {
+			if (light_tempo == 0 && ((lcd_flags & LCD_FLAG_L) == 0))
+				lcd_backlight(1);
+			light_tempo = FLASH_LIGHT_TEMPO;
+		}
+		processed = 1;
+		break;
+	case 'f':	/* Small Font */
+		lcd_flags &= ~LCD_FLAG_F;
+		processed = 1;
+		break;
+	case 'F':	/* Large Font */
+		lcd_flags |= LCD_FLAG_F;
+		processed = 1;
+		break;
+	case 'n':	/* One Line */
+		lcd_flags &= ~LCD_FLAG_N;
+		processed = 1;
+		break;
+	case 'N':	/* Two Lines */
+		lcd_flags |= LCD_FLAG_N;
+		break;
+	case 'l':	/* Shift Cursor Left */
+		if (lcd_addr_x > 0) {
+			/* back one char if not at end of line */
+			if (lcd_addr_x < lcd_bwidth)
+				lcd_write_cmd(0x10);
+			lcd_addr_x--;
+		}
+		processed = 1;
+		break;
+	case 'r':	/* shift cursor right */
+		if (lcd_addr_x < lcd_width) {
+			/* allow the cursor to pass the end of the line */
+			if (lcd_addr_x <
+			    (lcd_bwidth - 1))
+				lcd_write_cmd(0x14);
+			lcd_addr_x++;
+		}
+		processed = 1;
+		break;
+	case 'L':	/* shift display left */
+		lcd_left_shift++;
+		lcd_write_cmd(0x18);
+		processed = 1;
+		break;
+	case 'R':	/* shift display right */
+		lcd_left_shift--;
+		lcd_write_cmd(0x1C);
+		processed = 1;
+		break;
+	case 'k': {	/* kill end of line */
+		int x;
+		for (x = lcd_addr_x; x < lcd_bwidth; x++)
+			lcd_write_data(' ');
+
+		/* restore cursor position */
+		lcd_gotoxy();
+		processed = 1;
+		break;
+	}
+	case 'I':	/* reinitialize display */
+		lcd_init_display();
+		lcd_left_shift = 0;
+		processed = 1;
+		break;
+	case 'G': {
+		/* Generator : LGcxxxxx...xx; must have <c> between '0'
+		 * and '7', representing the numerical ASCII code of the
+		 * redefined character, and <xx...xx> a sequence of 16
+		 * hex digits representing 8 bytes for each character.
+		 * Most LCDs will only use 5 lower bits of the 7 first
+		 * bytes.
+		 */
+
+		unsigned char cgbytes[8];
+		unsigned char cgaddr;
+		int cgoffset;
+		int shift;
+		char value;
+		int addr;
+
+		if (strchr(esc, ';') == NULL)
+			break;
+
+		esc++;
+
+		cgaddr = *(esc++) - '0';
+		if (cgaddr > 7) {
+			processed = 1;
+			break;
+		}
+
+		cgoffset = 0;
+		shift = 0;
+		value = 0;
+		while (*esc && cgoffset < 8) {
+			shift ^= 4;
+			if (*esc >= '0' && *esc <= '9')
+				value |= (*esc - '0') << shift;
+			else if (*esc >= 'A' && *esc <= 'Z')
+				value |= (*esc - 'A' + 10) << shift;
+			else if (*esc >= 'a' && *esc <= 'z')
+				value |= (*esc - 'a' + 10) << shift;
+			else {
+				esc++;
+				continue;
+			}
+
+			if (shift == 0) {
+				cgbytes[cgoffset++] = value;
+				value = 0;
+			}
+
+			esc++;
+		}
+
+		lcd_write_cmd(0x40 | (cgaddr * 8));
+		for (addr = 0; addr < cgoffset; addr++)
+			lcd_write_data(cgbytes[addr]);
+
+		/* ensures that we stop writing to CGRAM */
+		lcd_gotoxy();
+		processed = 1;
+		break;
+	}
+	case 'x':	/* gotoxy : LxXXX[yYYY]; */
+	case 'y':	/* gotoxy : LyYYY[xXXX]; */
+		if (strchr(esc, ';') == NULL)
+			break;
+
+		while (*esc) {
+			char *endp;
+
+			if (*esc == 'x') {
+				esc++;
+				lcd_addr_x = simple_strtoul(esc, &endp, 10);
+				esc = endp;
+			} else if (*esc == 'y') {
+				esc++;
+				lcd_addr_y = simple_strtoul(esc, &endp, 10);
+				esc = endp;
+			} else
+				break;
+		}
+
+		lcd_gotoxy();
+		processed = 1;
+		break;
+	}
+
+	/* Check wether one flag was changed */
+	if (oldflags != lcd_flags) {
+		/* check whether one of B,C,D flags were changed */
+		if ((oldflags ^ lcd_flags) &
+		    (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
+			/* set display mode */
+			lcd_write_cmd(0x08
+				      | ((lcd_flags & LCD_FLAG_D) ? 4 : 0)
+				      | ((lcd_flags & LCD_FLAG_C) ? 2 : 0)
+				      | ((lcd_flags & LCD_FLAG_B) ? 1 : 0));
+		/* check whether one of F,N flags was changed */
+		else if ((oldflags ^ lcd_flags) & (LCD_FLAG_F | LCD_FLAG_N))
+			lcd_write_cmd(0x30
+				      | ((lcd_flags & LCD_FLAG_F) ? 4 : 0)
+				      | ((lcd_flags & LCD_FLAG_N) ? 8 : 0));
+		/* check wether L flag was changed */
+		else if ((oldflags ^ lcd_flags) & (LCD_FLAG_L)) {
+			if (lcd_flags & (LCD_FLAG_L))
+				lcd_backlight(1);
+			else if (light_tempo == 0)
+				/* switch off the light only when the tempo
+				   lighting is gone */
+				lcd_backlight(0);
+		}
+	}
+
+	return processed;
+}
+
 static ssize_t lcd_write(struct file *file,
 			 const char *buf, size_t count, loff_t *ppos)
 {
-
 	const char *tmp = buf;
 	char c;
 
 	for (; count-- > 0; (ppos ? (*ppos)++ : 0), ++tmp) {
 		if (!in_interrupt() && (((count + 1) & 0x1f) == 0))
-			schedule();	/* let's be a little nice with other processes that need some CPU */
+			/* let's be a little nice with other processes
+			   that need some CPU */
+			schedule();
 
 		if (ppos == NULL && file == NULL)
-			c = *tmp;	/* let's not use get_user() from the kernel ! */
+			/* let's not use get_user() from the kernel ! */
+			c = *tmp;
 		else if (get_user(c, tmp))
 			return -EFAULT;
 
 		/* first, we'll test if we're in escape mode */
-		if ((c != '\n') && lcd_escape_len >= 0) {	/* yes, let's add this char to the buffer */
+		if ((c != '\n') && lcd_escape_len >= 0) {
+			/* yes, let's add this char to the buffer */
 			lcd_escape[lcd_escape_len++] = c;
 			lcd_escape[lcd_escape_len] = 0;
 		} else {
-			lcd_escape_len = -1;	/* aborts any previous escape sequence */
+			/* aborts any previous escape sequence */
+			lcd_escape_len = -1;
 
 			switch (c) {
-			case LCD_ESCAPE_CHAR:	/* start of an escape sequence */
+			case LCD_ESCAPE_CHAR:
+				/* start of an escape sequence */
 				lcd_escape_len = 0;
 				lcd_escape[lcd_escape_len] = 0;
 				break;
-			case '\b':	/* go back one char and clear it */
+			case '\b':
+				/* go back one char and clear it */
 				if (lcd_addr_x > 0) {
-					if (lcd_addr_x < lcd_bwidth)	/* check if we're not at the end of the line */
-						lcd_write_cmd(0x10);	/* back one char */
+					/* check if we're not at the
+					   end of the line */
+					if (lcd_addr_x < lcd_bwidth)
+						/* back one char */
+						lcd_write_cmd(0x10);
 					lcd_addr_x--;
 				}
-				lcd_write_data(' ');	/* replace with a space */
-				lcd_write_cmd(0x10);	/* back one char again */
+				/* replace with a space */
+				lcd_write_data(' ');
+				/* back one char again */
+				lcd_write_cmd(0x10);
 				break;
-			case '\014':	/* quickly clear the display */
+			case '\014':
+				/* quickly clear the display */
 				lcd_clear_fast();
 				break;
-			case '\n':	/* flush the remainder of the current line and go to the
-					   beginning of the next line */
+			case '\n':
+				/* flush the remainder of the current line and
+				   go to the beginning of the next line */
 				for (; lcd_addr_x < lcd_bwidth; lcd_addr_x++)
 					lcd_write_data(' ');
 				lcd_addr_x = 0;
 				lcd_addr_y = (lcd_addr_y + 1) % lcd_height;
 				lcd_gotoxy();
 				break;
-			case '\r':	/* go to the beginning of the same line */
+			case '\r':
+				/* go to the beginning of the same line */
 				lcd_addr_x = 0;
 				lcd_gotoxy();
 				break;
-			case '\t':	/* print a space instead of the tab */
+			case '\t':
+				/* print a space instead of the tab */
 				lcd_print(' ');
 				break;
-			default:	/* simply print this char */
+			default:
+				/* simply print this char */
 				lcd_print(c);
 				break;
 			}
 		}
 
 		/* now we'll see if we're in an escape mode and if the current
-		   escape sequence can be understood.
-		 */
-		if (lcd_escape_len >= 2) {	/* minimal length for an escape command */
-			int processed = 0;	/* 1 means the command has been processed */
+		   escape sequence can be understood. */
+		if (lcd_escape_len >= 2) {
+			int processed = 0;
 
-			if (!strcmp(lcd_escape, "[2J")) {	/* Clear the display */
-				lcd_clear_fast();	/* clear display */
+			if (!strcmp(lcd_escape, "[2J")) {
+				/* clear the display */
+				lcd_clear_fast();
 				processed = 1;
-			} else if (!strcmp(lcd_escape, "[H")) {	/* Cursor to home */
+			} else if (!strcmp(lcd_escape, "[H")) {
+				/* cursor to home */
 				lcd_addr_x = lcd_addr_y = 0;
 				lcd_gotoxy();
 				processed = 1;
 			}
 			/* codes starting with ^[[L */
 			else if ((lcd_escape_len >= 3) &&
-				 (lcd_escape[0] == '[') && (lcd_escape[1] == 'L')) {	/* LCD special codes */
-
-				char *esc = lcd_escape + 2;
-				int oldflags = lcd_flags;
-
-				/* check for display mode flags */
-				switch (*esc) {
-				case 'D':	/* Display ON */
-					lcd_flags |= LCD_FLAG_D;
-					processed = 1;
-					break;
-				case 'd':	/* Display OFF */
-					lcd_flags &= ~LCD_FLAG_D;
-					processed = 1;
-					break;
-				case 'C':	/* Cursor ON */
-					lcd_flags |= LCD_FLAG_C;
-					processed = 1;
-					break;
-				case 'c':	/* Cursor OFF */
-					lcd_flags &= ~LCD_FLAG_C;
-					processed = 1;
-					break;
-				case 'B':	/* Blink ON */
-					lcd_flags |= LCD_FLAG_B;
-					processed = 1;
-					break;
-				case 'b':	/* Blink OFF */
-					lcd_flags &= ~LCD_FLAG_B;
-					processed = 1;
-					break;
-				case '+':	/* Back light ON */
-					lcd_flags |= LCD_FLAG_L;
-					processed = 1;
-					break;
-				case '-':	/* Back light OFF */
-					lcd_flags &= ~LCD_FLAG_L;
-					processed = 1;
-					break;
-				case '*':	/* flash back light using the keypad timer */
-					if (scan_timer.function != NULL) {
-						if (light_tempo == 0
-						    && ((lcd_flags & LCD_FLAG_L)
-							== 0))
-							lcd_backlight(1);
-						light_tempo = FLASH_LIGHT_TEMPO;
-					}
-					processed = 1;
-					break;
-				case 'f':	/* Small Font */
-					lcd_flags &= ~LCD_FLAG_F;
-					processed = 1;
-					break;
-				case 'F':	/* Large Font */
-					lcd_flags |= LCD_FLAG_F;
-					processed = 1;
-					break;
-				case 'n':	/* One Line */
-					lcd_flags &= ~LCD_FLAG_N;
-					processed = 1;
-					break;
-				case 'N':	/* Two Lines */
-					lcd_flags |= LCD_FLAG_N;
-					break;
-
-				case 'l':	/* Shift Cursor Left */
-					if (lcd_addr_x > 0) {
-						if (lcd_addr_x < lcd_bwidth)
-							lcd_write_cmd(0x10);	/* back one char if not at end of line */
-						lcd_addr_x--;
-					}
-					processed = 1;
-					break;
-
-				case 'r':	/* shift cursor right */
-					if (lcd_addr_x < lcd_width) {
-						if (lcd_addr_x < (lcd_bwidth - 1))
-							lcd_write_cmd(0x14);	/* allow the cursor to pass the end of the line */
-						lcd_addr_x++;
-					}
-					processed = 1;
-					break;
-
-				case 'L':	/* shift display left */
-					lcd_left_shift++;
-					lcd_write_cmd(0x18);
-					processed = 1;
-					break;
-
-				case 'R':	/* shift display right */
-					lcd_left_shift--;
-					lcd_write_cmd(0x1C);
-					processed = 1;
-					break;
-
-				case 'k':{	/* kill end of line */
-						int x;
-						for (x = lcd_addr_x; x < lcd_bwidth; x++)
-							lcd_write_data(' ');
-						lcd_gotoxy();	/* restore cursor position */
-						processed = 1;
-						break;
-					}
-				case 'I':	/* reinitialize display */
-					lcd_init_display();
-					lcd_left_shift = 0;
-					processed = 1;
-					break;
-
-				case 'G':	/* Generator : LGcxxxxx...xx; */  {
-						/* must have <c> between '0' and '7', representing the numerical
-						 * ASCII code of the redefined character, and <xx...xx> a sequence
-						 * of 16 hex digits representing 8 bytes for each character. Most
-						 * LCDs will only use 5 lower bits of the 7 first bytes.
-						 */
-
-						unsigned char cgbytes[8];
-						unsigned char cgaddr;
-						int cgoffset;
-						int shift;
-						char value;
-						int addr;
-
-						if (strchr(esc, ';') == NULL)
-							break;
-
-						esc++;
-
-						cgaddr = *(esc++) - '0';
-						if (cgaddr > 7) {
-							processed = 1;
-							break;
-						}
-
-						cgoffset = 0;
-						shift = 0;
-						value = 0;
-						while (*esc && cgoffset < 8) {
-							shift ^= 4;
-							if (*esc >= '0' && *esc <= '9')
-								value |= (*esc - '0') << shift;
-							else if (*esc >= 'A' && *esc <= 'Z')
-								value |= (*esc - 'A' + 10) << shift;
-							else if (*esc >= 'a' && *esc <= 'z')
-								value |= (*esc - 'a' + 10) << shift;
-							else {
-								esc++;
-								continue;
-							}
-
-							if (shift == 0) {
-								cgbytes[cgoffset++] = value;
-								value = 0;
-							}
-
-							esc++;
-						}
-
-						lcd_write_cmd(0x40 | (cgaddr * 8));
-						for (addr = 0; addr < cgoffset; addr++)
-							lcd_write_data(cgbytes[addr]);
-
-						lcd_gotoxy();	/* ensures that we stop writing to CGRAM */
-						processed = 1;
-						break;
-					}
-				case 'x':	/* gotoxy : LxXXX[yYYY]; */
-				case 'y':	/* gotoxy : LyYYY[xXXX]; */
-					if (strchr(esc, ';') == NULL)
-						break;
-
-					while (*esc) {
-						if (*esc == 'x') {
-							esc++;
-							lcd_addr_x = 0;
-							while (isdigit(*esc)) {
-								lcd_addr_x =
-								    lcd_addr_x *
-								    10 + (*esc -
-									  '0');
-								esc++;
-							}
-						} else if (*esc == 'y') {
-							esc++;
-							lcd_addr_y = 0;
-							while (isdigit(*esc)) {
-								lcd_addr_y =
-								    lcd_addr_y *
-								    10 + (*esc -
-									  '0');
-								esc++;
-							}
-						} else
-							break;
-					}
-
-					lcd_gotoxy();
-					processed = 1;
-					break;
-				}	/* end of switch */
-
-				/* Check wether one flag was changed */
-				if (oldflags != lcd_flags) {
-					/* check wether one of B,C,D flags was changed */
-					if ((oldflags ^ lcd_flags) &
-					    (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D))
-						/* set display mode */
-						lcd_write_cmd(0x08 |
-							      ((lcd_flags & LCD_FLAG_D) ? 4 : 0) |
-							      ((lcd_flags & LCD_FLAG_C) ? 2 : 0) |
-							      ((lcd_flags & LCD_FLAG_B) ? 1 : 0));
-					/* check wether one of F,N flags was changed */
-					else if ((oldflags ^ lcd_flags) &
-						 (LCD_FLAG_F | LCD_FLAG_N))
-						lcd_write_cmd(0x30 |
-							      ((lcd_flags & LCD_FLAG_F) ? 4 : 0) |
-							      ((lcd_flags & LCD_FLAG_N) ? 8 : 0));
-					/* check wether L flag was changed */
-					else if ((oldflags ^ lcd_flags) &
-						 (LCD_FLAG_L)) {
-						if (lcd_flags & (LCD_FLAG_L))
-							lcd_backlight(1);
-						else if (light_tempo == 0)	/* switch off the light only when the tempo lighting is gone */
-							lcd_backlight(0);
-					}
-				}
+				 (lcd_escape[0] == '[') &&
+				 (lcd_escape[1] == 'L')) {
+				processed = handle_lcd_special_code();
 			}
 
 			/* LCD special escape codes */
-			/* flush the escape sequence if it's been processed or if it is
-			   getting too long. */
+			/* flush the escape sequence if it's been processed
+			   or if it is getting too long. */
 			if (processed || (lcd_escape_len >= LCD_ESCAPE_LEN))
 				lcd_escape_len = -1;
-		}		/* escape codes */
+		} /* escape codes */
 	}
 
 	return tmp - buf;
@@ -1295,7 +1351,7 @@ static int lcd_open(struct inode *inode, struct file *file)
 		lcd_must_clear = 0;
 	}
 	lcd_open_cnt++;
-	return 0;
+	return nonseekable_open(inode, file);
 }
 
 static int lcd_release(struct inode *inode, struct file *file)
@@ -1304,10 +1360,11 @@ static int lcd_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations lcd_fops = {
+static const struct file_operations lcd_fops = {
 	.write   = lcd_write,
 	.open    = lcd_open,
 	.release = lcd_release,
+	.llseek  = no_llseek,
 };
 
 static struct miscdevice lcd_dev = {
@@ -1327,7 +1384,8 @@ void panel_lcd_print(char *s)
 void lcd_init(void)
 {
 	switch (lcd_type) {
-	case LCD_TYPE_OLD:	/* parallel mode, 8 bits */
+	case LCD_TYPE_OLD:
+		/* parallel mode, 8 bits */
 		if (lcd_proto < 0)
 			lcd_proto = LCD_PROTO_PARALLEL;
 		if (lcd_charset < 0)
@@ -1346,7 +1404,8 @@ void lcd_init(void)
 		if (lcd_height < 0)
 			lcd_height = 2;
 		break;
-	case LCD_TYPE_KS0074:	/* serial mode, ks0074 */
+	case LCD_TYPE_KS0074:
+		/* serial mode, ks0074 */
 		if (lcd_proto < 0)
 			lcd_proto = LCD_PROTO_SERIAL;
 		if (lcd_charset < 0)
@@ -1367,7 +1426,8 @@ void lcd_init(void)
 		if (lcd_height < 0)
 			lcd_height = 2;
 		break;
-	case LCD_TYPE_NEXCOM:	/* parallel mode, 8 bits, generic */
+	case LCD_TYPE_NEXCOM:
+		/* parallel mode, 8 bits, generic */
 		if (lcd_proto < 0)
 			lcd_proto = LCD_PROTO_PARALLEL;
 		if (lcd_charset < 0)
@@ -1388,14 +1448,16 @@ void lcd_init(void)
 		if (lcd_height < 0)
 			lcd_height = 2;
 		break;
-	case LCD_TYPE_CUSTOM:	/* customer-defined */
+	case LCD_TYPE_CUSTOM:
+		/* customer-defined */
 		if (lcd_proto < 0)
 			lcd_proto = DEFAULT_LCD_PROTO;
 		if (lcd_charset < 0)
 			lcd_charset = DEFAULT_LCD_CHARSET;
 		/* default geometry will be set later */
 		break;
-	case LCD_TYPE_HANTRONIX:	/* parallel mode, 8 bits, hantronix-like */
+	case LCD_TYPE_HANTRONIX:
+		/* parallel mode, 8 bits, hantronix-like */
 	default:
 		if (lcd_proto < 0)
 			lcd_proto = LCD_PROTO_PARALLEL;
@@ -1496,8 +1558,7 @@ void lcd_init(void)
 
 	/* before this line, we must NOT send anything to the display.
 	 * Since lcd_init_display() needs to write data, we have to
-	 * enable mark the LCD initialized just before.
-	 */
+	 * enable mark the LCD initialized just before. */
 	lcd_initialized = 1;
 	lcd_init_display();
 
@@ -1511,7 +1572,8 @@ void lcd_init(void)
 			PANEL_VERSION);
 #endif
 	lcd_addr_x = lcd_addr_y = 0;
-	lcd_must_clear = 1;	/* clear the display on the next device opening */
+	/* clear the display on the next device opening */
+	lcd_must_clear = 1;
 	lcd_gotoxy();
 }
 
@@ -1535,7 +1597,8 @@ static ssize_t keypad_read(struct file *file,
 			return -EINTR;
 	}
 
-	for (; count-- > 0 && (keypad_buflen > 0); ++i, ++tmp, --keypad_buflen) {
+	for (; count-- > 0 && (keypad_buflen > 0);
+	     ++i, ++tmp, --keypad_buflen) {
 		put_user(keypad_buffer[keypad_start], tmp);
 		keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
 	}
@@ -1564,7 +1627,7 @@ static int keypad_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static struct file_operations keypad_fops = {
+static const struct file_operations keypad_fops = {
 	.read    = keypad_read,		/* read */
 	.open    = keypad_open,		/* open */
 	.release = keypad_release,	/* close */
@@ -1591,14 +1654,15 @@ static void keypad_send_key(char *string, int max_len)
 	}
 }
 
-/* this function scans all the bits involving at least one logical signal, and puts the
- * results in the bitfield "phys_read" (one bit per established contact), and sets
- * "phys_read_prev" to "phys_read".
+/* this function scans all the bits involving at least one logical signal,
+ * and puts the results in the bitfield "phys_read" (one bit per established
+ * contact), and sets "phys_read_prev" to "phys_read".
  *
- * Note: to debounce input signals, we will only consider as switched a signal which is
- * stable across 2 measures. Signals which are different between two reads will be kept
- * as they previously were in their logical form (phys_prev). A signal which has just
- * switched will have a 1 in (phys_read ^ phys_read_prev).
+ * Note: to debounce input signals, we will only consider as switched a signal
+ * which is stable across 2 measures. Signals which are different between two
+ * reads will be kept as they previously were in their logical form (phys_prev).
+ * A signal which has just switched will have a 1 in
+ * (phys_read ^ phys_read_prev).
  */
 static void phys_scan_contacts(void)
 {
@@ -1611,21 +1675,30 @@ static void phys_scan_contacts(void)
 	phys_read_prev = phys_read;
 	phys_read = 0;		/* flush all signals */
 
-	oldval = r_dtr(pprt) | scan_mask_o;	/* keep track of old value, with all outputs disabled */
-	w_dtr(pprt, oldval & ~scan_mask_o);	/* activate all keyboard outputs (active low) */
-	bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;	/* will have a 1 for each bit set to gnd */
-	w_dtr(pprt, oldval);	/* disable all matrix signals */
+	/* keep track of old value, with all outputs disabled */
+	oldval = r_dtr(pprt) | scan_mask_o;
+	/* activate all keyboard outputs (active low) */
+	w_dtr(pprt, oldval & ~scan_mask_o);
+
+	/* will have a 1 for each bit set to gnd */
+	bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;
+	/* disable all matrix signals */
+	w_dtr(pprt, oldval);
 
 	/* now that all outputs are cleared, the only active input bits are
 	 * directly connected to the ground
 	 */
-	gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;	/* 1 for each grounded input */
 
-	phys_read |= (pmask_t) gndmask << 40;	/* grounded inputs are signals 40-44 */
+	/* 1 for each grounded input */
+	gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;
+
+	/* grounded inputs are signals 40-44 */
+	phys_read |= (pmask_t) gndmask << 40;
 
 	if (bitmask != gndmask) {
-		/* since clearing the outputs changed some inputs, we know that some
-		 * input signals are currently tied to some outputs. So we'll scan them.
+		/* since clearing the outputs changed some inputs, we know
+		 * that some input signals are currently tied to some outputs.
+		 * So we'll scan them.
 		 */
 		for (bit = 0; bit < 8; bit++) {
 			bitval = 1 << bit;
@@ -1639,11 +1712,127 @@ static void phys_scan_contacts(void)
 		}
 		w_dtr(pprt, oldval);	/* disable all outputs */
 	}
-	/* this is easy: use old bits when they are flapping, use new ones when stable */
-	phys_curr =
-	    (phys_prev & (phys_read ^ phys_read_prev)) | (phys_read &
-							  ~(phys_read ^
-							    phys_read_prev));
+	/* this is easy: use old bits when they are flapping,
+	 * use new ones when stable */
+	phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) |
+		    (phys_read & ~(phys_read ^ phys_read_prev));
+}
+
+static inline int input_state_high(struct logical_input *input)
+{
+#if 0
+	/* FIXME:
+	 * this is an invalid test. It tries to catch
+	 * transitions from single-key to multiple-key, but
+	 * doesn't take into account the contacts polarity.
+	 * The only solution to the problem is to parse keys
+	 * from the most complex to the simplest combinations,
+	 * and mark them as 'caught' once a combination
+	 * matches, then unmatch it for all other ones.
+	 */
+
+	/* try to catch dangerous transitions cases :
+	 * someone adds a bit, so this signal was a false
+	 * positive resulting from a transition. We should
+	 * invalidate the signal immediately and not call the
+	 * release function.
+	 * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
+	 */
+	if (((phys_prev & input->mask) == input->value)
+	    && ((phys_curr & input->mask) > input->value)) {
+		input->state = INPUT_ST_LOW; /* invalidate */
+		return 1;
+	}
+#endif
+
+	if ((phys_curr & input->mask) == input->value) {
+		if ((input->type == INPUT_TYPE_STD) &&
+		    (input->high_timer == 0)) {
+			input->high_timer++;
+			if (input->u.std.press_fct != NULL)
+				input->u.std.press_fct(input->u.std.press_data);
+		} else if (input->type == INPUT_TYPE_KBD) {
+			/* will turn on the light */
+			keypressed = 1;
+
+			if (input->high_timer == 0) {
+				char *press_str = input->u.kbd.press_str;
+				if (press_str[0])
+					keypad_send_key(press_str,
+							sizeof(press_str));
+			}
+
+			if (input->u.kbd.repeat_str[0]) {
+				char *repeat_str = input->u.kbd.repeat_str;
+				if (input->high_timer >= KEYPAD_REP_START) {
+					input->high_timer -= KEYPAD_REP_DELAY;
+					keypad_send_key(repeat_str,
+							sizeof(repeat_str));
+				}
+				/* we will need to come back here soon */
+				inputs_stable = 0;
+			}
+
+			if (input->high_timer < 255)
+				input->high_timer++;
+		}
+		return 1;
+	} else {
+		/* else signal falling down. Let's fall through. */
+		input->state = INPUT_ST_FALLING;
+		input->fall_timer = 0;
+	}
+	return 0;
+}
+
+static inline void input_state_falling(struct logical_input *input)
+{
+#if 0
+	/* FIXME !!! same comment as in input_state_high */
+	if (((phys_prev & input->mask) == input->value)
+	    && ((phys_curr & input->mask) > input->value)) {
+		input->state = INPUT_ST_LOW;	/* invalidate */
+		return;
+	}
+#endif
+
+	if ((phys_curr & input->mask) == input->value) {
+		if (input->type == INPUT_TYPE_KBD) {
+			/* will turn on the light */
+			keypressed = 1;
+
+			if (input->u.kbd.repeat_str[0]) {
+				char *repeat_str = input->u.kbd.repeat_str;
+				if (input->high_timer >= KEYPAD_REP_START)
+					input->high_timer -= KEYPAD_REP_DELAY;
+					keypad_send_key(repeat_str,
+							sizeof(repeat_str));
+				/* we will need to come back here soon */
+				inputs_stable = 0;
+			}
+
+			if (input->high_timer < 255)
+				input->high_timer++;
+		}
+		input->state = INPUT_ST_HIGH;
+	} else if (input->fall_timer >= input->fall_time) {
+		/* call release event */
+		if (input->type == INPUT_TYPE_STD) {
+			void (*release_fct)(int) = input->u.std.release_fct;
+			if (release_fct != NULL)
+				release_fct(input->u.std.release_data);
+		} else if (input->type == INPUT_TYPE_KBD) {
+			char *release_str = input->u.kbd.release_str;
+			if (release_str[0])
+				keypad_send_key(release_str,
+						sizeof(release_str));
+		}
+
+		input->state = INPUT_ST_LOW;
+	} else {
+		input->fall_timer++;
+		inputs_stable = 0;
+	}
 }
 
 static void panel_process_inputs(void)
@@ -1666,10 +1855,12 @@ static void panel_process_inputs(void)
 		case INPUT_ST_LOW:
 			if ((phys_curr & input->mask) != input->value)
 				break;
-			/* if all needed ones were already set previously, this means that
-			 * this logical signal has been activated by the releasing of
-			 * another combined signal, so we don't want to match.
-			 * eg: AB -(release B)-> A -(release A)-> 0 : don't match A.
+			/* if all needed ones were already set previously,
+			 * this means that this logical signal has been
+			 * activated by the releasing of another combined
+			 * signal, so we don't want to match.
+			 * eg: AB -(release B)-> A -(release A)-> 0 :
+			 *     don't match A.
 			 */
 			if ((phys_prev & input->mask) == input->value)
 				break;
@@ -1690,122 +1881,11 @@ static void panel_process_inputs(void)
 			input->state = INPUT_ST_HIGH;
 			/* no break here, fall through */
 		case INPUT_ST_HIGH:
-#if 0
-			/* FIXME:
-			 * this is an invalid test. It tries to catch transitions from single-key
-			 * to multiple-key, but doesn't take into account the contacts polarity.
-			 * The only solution to the problem is to parse keys from the most complex
-			 * to the simplest combinations, and mark them as 'caught' once a combination
-			 * matches, then unmatch it for all other ones.
-			 */
-
-			/* try to catch dangerous transitions cases :
-			 * someone adds a bit, so this signal was a false
-			 * positive resulting from a transition. We should invalidate
-			 * the signal immediately and not call the release function.
-			 * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
-			 */
-			if (((phys_prev & input->mask) == input->value)
-			    && ((phys_curr & input->mask) > input->value)) {
-				input->state = INPUT_ST_LOW;	/* invalidate */
-				break;
-			}
-#endif
-
-			if ((phys_curr & input->mask) == input->value) {
-				if ((input->type == INPUT_TYPE_STD)
-				    && (input->high_timer == 0)) {
-					input->high_timer++;
-					if (input->u.std.press_fct != NULL)
-						input->u.std.press_fct(input->u.
-								       std.
-								       press_data);
-				} else if (input->type == INPUT_TYPE_KBD) {
-					keypressed = 1;	/* will turn on the light */
-
-					if (input->high_timer == 0) {
-						if (input->u.kbd.press_str[0])
-							keypad_send_key(input->
-									u.kbd.
-									press_str,
-									sizeof
-									(input->
-									 u.kbd.
-									 press_str));
-					}
-
-					if (input->u.kbd.repeat_str[0]) {
-						if (input->high_timer >=
-						    KEYPAD_REP_START) {
-							input->high_timer -=
-							    KEYPAD_REP_DELAY;
-							keypad_send_key(input->
-									u.kbd.
-									repeat_str,
-									sizeof
-									(input->
-									 u.kbd.
-									 repeat_str));
-						}
-						inputs_stable = 0;	/* we will need to come back here soon */
-					}
-
-					if (input->high_timer < 255)
-						input->high_timer++;
-				}
+			if (input_state_high(input))
 				break;
-			} else {
-				/* else signal falling down. Let's fall through. */
-				input->state = INPUT_ST_FALLING;
-				input->fall_timer = 0;
-			}
 			/* no break here, fall through */
 		case INPUT_ST_FALLING:
-#if 0
-			/* FIXME !!! same comment as above */
-			if (((phys_prev & input->mask) == input->value)
-			    && ((phys_curr & input->mask) > input->value)) {
-				input->state = INPUT_ST_LOW;	/* invalidate */
-				break;
-			}
-#endif
-
-			if ((phys_curr & input->mask) == input->value) {
-				if (input->type == INPUT_TYPE_KBD) {
-					keypressed = 1;	/* will turn on the light */
-
-					if (input->u.kbd.repeat_str[0]) {
-						if (input->high_timer >= KEYPAD_REP_START)
-							input->high_timer -= KEYPAD_REP_DELAY;
-						keypad_send_key(input->u.kbd.repeat_str,
-								sizeof(input->u.kbd.repeat_str));
-						inputs_stable = 0;	/* we will need to come back here soon */
-					}
-
-					if (input->high_timer < 255)
-						input->high_timer++;
-				}
-				input->state = INPUT_ST_HIGH;
-				break;
-			} else if (input->fall_timer >= input->fall_time) {
-				/* call release event */
-				if (input->type == INPUT_TYPE_STD) {
-					if (input->u.std.release_fct != NULL)
-						input->u.std.release_fct(input->u.std.release_data);
-
-				} else if (input->type == INPUT_TYPE_KBD) {
-					if (input->u.kbd.release_str[0])
-						keypad_send_key(input->u.kbd.release_str,
-								sizeof(input->u.kbd.release_str));
-				}
-
-				input->state = INPUT_ST_LOW;
-				break;
-			} else {
-				input->fall_timer++;
-				inputs_stable = 0;
-				break;
-			}
+			input_state_falling(input);
 		}
 	}
 }
@@ -1815,7 +1895,9 @@ static void panel_scan_timer(void)
 	if (keypad_enabled && keypad_initialized) {
 		if (spin_trylock(&pprt_lock)) {
 			phys_scan_contacts();
-			spin_unlock(&pprt_lock);	/* no need for the parport anymore */
+
+			/* no need for the parport anymore */
+			spin_unlock(&pprt_lock);
 		}
 
 		if (!inputs_stable || phys_curr != phys_prev)
@@ -1850,8 +1932,8 @@ static void init_scan_timer(void)
 }
 
 /* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
- * if <omask> or <imask> are non-null, they will be or'ed with the bits corresponding
- * to out and in bits respectively.
+ * if <omask> or <imask> are non-null, they will be or'ed with the bits
+ * corresponding to out and in bits respectively.
  * returns 1 if ok, 0 if error (in which case, nothing is written).
  */
 static int input_name2mask(char *name, pmask_t *mask, pmask_t *value,
@@ -1864,7 +1946,8 @@ static int input_name2mask(char *name, pmask_t *mask, pmask_t *value,
 	om = im = m = v = 0ULL;
 	while (*name) {
 		int in, out, bit, neg;
-		for (in = 0; (in < sizeof(sigtab)) && (sigtab[in] != *name); in++)
+		for (in = 0; (in < sizeof(sigtab)) &&
+			     (sigtab[in] != *name); in++)
 			;
 		if (in >= sizeof(sigtab))
 			return 0;	/* input name not found */
@@ -1912,8 +1995,10 @@ static struct logical_input *panel_bind_key(char *name, char *press,
 		return NULL;
 	}
 	if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i,
-			     &scan_mask_o))
+			     &scan_mask_o)) {
+		kfree(key);
 		return NULL;
+	}
 
 	key->type = INPUT_TYPE_KBD;
 	key->state = INPUT_ST_LOW;
@@ -1936,7 +2021,8 @@ static struct logical_input *panel_bind_key(char *name, char *press,
 /* tries to bind a callback function to the signal name <name>. The function
  * <press_fct> will be called with the <press_data> arg when the signal is
  * activated, and so on for <release_fct>/<release_data>
- * Returns the pointer to the new signal if ok, NULL if the signal could not be bound.
+ * Returns the pointer to the new signal if ok, NULL if the signal could not
+ * be bound.
  */
 static struct logical_input *panel_bind_callback(char *name,
 						 void (*press_fct) (int),
@@ -2028,33 +2114,52 @@ static void panel_attach(struct parport *port)
 
 	if (pprt) {
 		printk(KERN_ERR
-		       "panel_attach(): port->number=%d parport=%d, already registered !\n",
+		       "panel_attach(): port->number=%d parport=%d, "
+		       "already registered !\n",
 		       port->number, parport);
 		return;
 	}
 
-	pprt = parport_register_device(port, "panel", NULL, NULL,	/* pf, kf */
+	pprt = parport_register_device(port, "panel", NULL, NULL,  /* pf, kf */
 				       NULL,
 				       /*PARPORT_DEV_EXCL */
 				       0, (void *)&pprt);
+	if (pprt == NULL) {
+		pr_err("panel_attach(): port->number=%d parport=%d, "
+		       "parport_register_device() failed\n",
+		       port->number, parport);
+		return;
+	}
 
 	if (parport_claim(pprt)) {
 		printk(KERN_ERR
-		       "Panel: could not claim access to parport%d. Aborting.\n",
-		       parport);
-		return;
+		       "Panel: could not claim access to parport%d. "
+		       "Aborting.\n", parport);
+		goto err_unreg_device;
 	}
 
-	/* must init LCD first, just in case an IRQ from the keypad is generated at keypad init */
+	/* must init LCD first, just in case an IRQ from the keypad is
+	 * generated at keypad init
+	 */
 	if (lcd_enabled) {
 		lcd_init();
-		misc_register(&lcd_dev);
+		if (misc_register(&lcd_dev))
+			goto err_unreg_device;
 	}
 
 	if (keypad_enabled) {
 		keypad_init();
-		misc_register(&keypad_dev);
+		if (misc_register(&keypad_dev))
+			goto err_lcd_unreg;
 	}
+	return;
+
+err_lcd_unreg:
+	if (lcd_enabled)
+		misc_deregister(&lcd_dev);
+err_unreg_device:
+	parport_unregister_device(pprt);
+	pprt = NULL;
 }
 
 static void panel_detach(struct parport *port)
@@ -2064,7 +2169,8 @@ static void panel_detach(struct parport *port)
 
 	if (!pprt) {
 		printk(KERN_ERR
-		       "panel_detach(): port->number=%d parport=%d, nothing to unregister.\n",
+		       "panel_detach(): port->number=%d parport=%d, "
+		       "nothing to unregister.\n",
 		       port->number, parport);
 		return;
 	}
@@ -2105,13 +2211,15 @@ int panel_init(void)
 
 	/* take care of an eventual profile */
 	switch (profile) {
-	case PANEL_PROFILE_CUSTOM:	/* custom profile */
+	case PANEL_PROFILE_CUSTOM:
+		/* custom profile */
 		if (keypad_type < 0)
 			keypad_type = DEFAULT_KEYPAD;
 		if (lcd_type < 0)
 			lcd_type = DEFAULT_LCD;
 		break;
-	case PANEL_PROFILE_OLD:	/* 8 bits, 2*16, old keypad */
+	case PANEL_PROFILE_OLD:
+		/* 8 bits, 2*16, old keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_OLD;
 		if (lcd_type < 0)
@@ -2121,25 +2229,29 @@ int panel_init(void)
 		if (lcd_hwidth < 0)
 			lcd_hwidth = 16;
 		break;
-	case PANEL_PROFILE_NEW:	/* serial, 2*16, new keypad */
+	case PANEL_PROFILE_NEW:
+		/* serial, 2*16, new keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NEW;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_KS0074;
 		break;
-	case PANEL_PROFILE_HANTRONIX:	/* 8 bits, 2*16 hantronix-like, no keypad */
+	case PANEL_PROFILE_HANTRONIX:
+		/* 8 bits, 2*16 hantronix-like, no keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NONE;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_HANTRONIX;
 		break;
-	case PANEL_PROFILE_NEXCOM:	/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
+	case PANEL_PROFILE_NEXCOM:
+		/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_NEXCOM;
 		if (lcd_type < 0)
 			lcd_type = LCD_TYPE_NEXCOM;
 		break;
-	case PANEL_PROFILE_LARGE:	/* 8 bits, 2*40, old keypad */
+	case PANEL_PROFILE_LARGE:
+		/* 8 bits, 2*40, old keypad */
 		if (keypad_type < 0)
 			keypad_type = KEYPAD_TYPE_OLD;
 		if (lcd_type < 0)
@@ -2179,6 +2291,7 @@ int panel_init(void)
 		if (pprt) {
 			parport_release(pprt);
 			parport_unregister_device(pprt);
+			pprt = NULL;
 		}
 		parport_unregister_driver(&panel_driver);
 		printk(KERN_ERR "Panel driver version " PANEL_VERSION
@@ -2195,7 +2308,8 @@ int panel_init(void)
 	else
 		printk(KERN_INFO "Panel driver version " PANEL_VERSION
 		       " not yet registered\n");
-	/* tells various subsystems about the fact that initialization is finished */
+	/* tells various subsystems about the fact that initialization
+	   is finished */
 	init_in_progress = 0;
 	return 0;
 }
@@ -2228,6 +2342,7 @@ static void __exit panel_cleanup_module(void)
 		/* TODO: free all input signals */
 		parport_release(pprt);
 		parport_unregister_device(pprt);
+		pprt = NULL;
 	}
 	parport_unregister_driver(&panel_driver);
 }
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 643b413d9f0..bc1c6051a6f 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -815,7 +815,7 @@ static int pohmelfs_readpages(struct file *file, struct address_space *mapping,
 }
 
 /*
- * Small addres space operations for POHMELFS.
+ * Small address space operations for POHMELFS.
  */
 const struct address_space_operations pohmelfs_aops = {
 	.readpage		= pohmelfs_readpage,
@@ -847,7 +847,7 @@ static void pohmelfs_destroy_inode(struct inode *inode)
 }
 
 /*
- * ->alloc_inode() callback. Allocates inode and initilizes private data.
+ * ->alloc_inode() callback. Allocates inode and initializes private data.
  */
 static struct inode *pohmelfs_alloc_inode(struct super_block *sb)
 {
@@ -1266,7 +1266,7 @@ static void pohmelfs_put_super(struct super_block *sb)
 {
 	struct pohmelfs_sb *psb = POHMELFS_SB(sb);
 	struct pohmelfs_inode *pi;
-	unsigned int count;
+	unsigned int count = 0;
 	unsigned int in_drop_list = 0;
 	struct inode *inode, *tmp;
 
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index ecd73135b31..9838ea279c5 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -258,8 +258,6 @@ static int qt2_box_get_register(struct usb_serial *serial,
 static int qt2_box_set_register(struct usb_serial *serial,
 		unsigned short Uart_Number, unsigned short Register_Num,
 		unsigned short Value);
-static int qt2_box_flush(struct usb_serial *serial,  unsigned char uart_number,
-		unsigned short rcv_or_xmit);
 static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
 		unsigned short default_divisor, unsigned char default_LCR);
 static int qt2_boxsethw_flowctl(struct usb_serial *serial,
@@ -645,9 +643,6 @@ static void qt2_close(struct usb_serial_port *port)
 	/* get the device private data */
 	port_extra = qt2_get_port_private(port); /* port private data */
 
-	/* we don't need to force flush though the hardware, so we skip using
-	 * qt2_box_flush() here */
-
 	/* we can now (and only now) stop reading data */
 	port_extra->close_pending = true;
 	dbg("%s(): port_extra->close_pending = true", __func__);
@@ -1841,24 +1836,6 @@ static int qt2_box_set_register(struct usb_serial *serial,
 	return result;
 }
 
-
-/** @brief Request the Tx or Rx buffers on the USB side be flushed
- *
- * Tx flush: When all the currently buffered data has been sent, send an escape
- * sequence back up the data stream to us
- * Rx flush: add a flag in the data stream now so we know when it's made it's
- * way up to us.
- */
-static int qt2_box_flush(struct usb_serial *serial,  unsigned char uart_number,
-		    unsigned short rcv_or_xmit)
-{
-	int result;
-	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		QT2_FLUSH_DEVICE, 0x40, rcv_or_xmit, uart_number, NULL, 0,
-		300);
-	return result;
-}
-
 /** qt2_boxsetuart - Issue a SET_UART vendor-spcific request on the default
  * control pipe. If successful sets baud rate divisor and LCR value.
  */
@@ -1873,6 +1850,7 @@ static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
 			QT2_GET_SET_UART, 0x40, default_divisor, UartNumandLCR,
 			NULL, 0, 300);
 }
+
 /** qt2_boxsethw_flowctl - Turn hardware (RTS/CTS) flow control on and off for
  * a hardware UART.
  */
diff --git a/drivers/staging/quickstart/Kconfig b/drivers/staging/quickstart/Kconfig
new file mode 100644
index 00000000000..5bea4875d37
--- /dev/null
+++ b/drivers/staging/quickstart/Kconfig
@@ -0,0 +1,10 @@
+config ACPI_QUICKSTART
+	tristate "ACPI Quickstart key driver"
+	depends on ACPI && INPUT
+	help
+	  Say Y here if you have a platform that supports the ACPI
+	  quickstart key protocol.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called quickstart.
+
diff --git a/drivers/staging/quickstart/Makefile b/drivers/staging/quickstart/Makefile
new file mode 100644
index 00000000000..290e0e47679
--- /dev/null
+++ b/drivers/staging/quickstart/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ACPI_QUICKSTART)		+= quickstart.o
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
new file mode 100644
index 00000000000..66122479d52
--- /dev/null
+++ b/drivers/staging/quickstart/quickstart.c
@@ -0,0 +1,474 @@
+/*
+ *  quickstart.c - ACPI Direct App Launch driver
+ *
+ *
+ *  Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com>
+ *
+ *  Information gathered from disassebled dsdt and from here:
+ *  "http://download.microsoft.com/download/9/c/5/
+ *  9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define QUICKSTART_VERSION "1.03"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+MODULE_AUTHOR("Angelo Arrifano");
+MODULE_DESCRIPTION("ACPI Direct App Launch driver");
+MODULE_LICENSE("GPL");
+
+#define QUICKSTART_ACPI_DEVICE_NAME   "quickstart"
+#define QUICKSTART_ACPI_CLASS         "quickstart"
+#define QUICKSTART_ACPI_HID           "PNP0C32"
+
+#define QUICKSTART_PF_DRIVER_NAME     "quickstart"
+#define QUICKSTART_PF_DEVICE_NAME     "quickstart"
+#define QUICKSTART_PF_DEVATTR_NAME    "pressed_button"
+
+#define QUICKSTART_MAX_BTN_NAME_LEN   16
+
+/* There will be two events:
+	 * 0x02 - A hot button was pressed while device was off/sleeping.
+	 * 0x80 - A hot button was pressed while device was up. */
+#define QUICKSTART_EVENT_WAKE         0x02
+#define QUICKSTART_EVENT_RUNTIME      0x80
+
+struct quickstart_btn {
+	char *name;
+	unsigned int id;
+	struct quickstart_btn *next;
+};
+
+static struct quickstart_driver_data {
+	struct quickstart_btn *btn_lst;
+	struct quickstart_btn *pressed;
+} quickstart_data;
+
+/* ACPI driver Structs */
+struct quickstart_acpi {
+	struct acpi_device *device;
+	struct quickstart_btn *btn;
+};
+static int quickstart_acpi_add(struct acpi_device *device);
+static int quickstart_acpi_remove(struct acpi_device *device, int type);
+static const struct acpi_device_id  quickstart_device_ids[] = {
+	{QUICKSTART_ACPI_HID, 0},
+	{"", 0},
+};
+
+static struct acpi_driver quickstart_acpi_driver = {
+	.name = "quickstart",
+	.class = QUICKSTART_ACPI_CLASS,
+	.ids = quickstart_device_ids,
+	.ops = {
+			.add = quickstart_acpi_add,
+			.remove = quickstart_acpi_remove,
+		},
+};
+
+/* Input device structs */
+struct input_dev *quickstart_input;
+
+/* Platform driver structs */
+static ssize_t buttons_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf);
+static ssize_t pressed_button_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf);
+static ssize_t pressed_button_store(struct device *dev,
+					struct device_attribute *attr,
+					 const char *buf,
+					 size_t count);
+static DEVICE_ATTR(pressed_button, 0666, pressed_button_show,
+					 pressed_button_store);
+static DEVICE_ATTR(buttons, 0444, buttons_show, NULL);
+static struct platform_device *pf_device;
+static struct platform_driver pf_driver = {
+	.driver = {
+		.name = QUICKSTART_PF_DRIVER_NAME,
+		.owner = THIS_MODULE,
+	}
+};
+
+/*
+ * Platform driver functions
+ */
+static ssize_t buttons_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	int count = 0;
+	struct quickstart_btn *ptr = quickstart_data.btn_lst;
+
+	if (!ptr)
+		return snprintf(buf, PAGE_SIZE, "none");
+
+	while (ptr && (count < PAGE_SIZE)) {
+		if (ptr->name) {
+			count += snprintf(buf + count,
+					PAGE_SIZE - count,
+					"%d\t%s\n", ptr->id, ptr->name);
+		}
+		ptr = ptr->next;
+	}
+
+	return count;
+}
+
+static ssize_t pressed_button_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+		(quickstart_data.pressed?quickstart_data.pressed->name:"none"));
+}
+
+
+static ssize_t pressed_button_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	if (count < 2)
+		return -EINVAL;
+
+	if (strncasecmp(buf, "none", 4) != 0)
+		return -EINVAL;
+
+	quickstart_data.pressed = NULL;
+	return count;
+}
+
+/* Hotstart Helper functions */
+static int quickstart_btnlst_add(struct quickstart_btn **data)
+{
+	struct quickstart_btn **ptr = &quickstart_data.btn_lst;
+
+	while (*ptr)
+		ptr = &((*ptr)->next);
+
+	*ptr = kzalloc(sizeof(struct quickstart_btn), GFP_KERNEL);
+	if (!*ptr) {
+		*data = NULL;
+		return -ENOMEM;
+	}
+	*data = *ptr;
+
+	return 0;
+}
+
+static void quickstart_btnlst_del(struct quickstart_btn *data)
+{
+	struct quickstart_btn **ptr = &quickstart_data.btn_lst;
+
+	if (!data)
+		return;
+
+	while (*ptr) {
+		if (*ptr == data) {
+			*ptr = (*ptr)->next;
+			kfree(data);
+			return;
+		}
+		ptr = &((*ptr)->next);
+	}
+
+	return;
+}
+
+static void quickstart_btnlst_free(void)
+{
+	struct quickstart_btn *ptr = quickstart_data.btn_lst;
+	struct quickstart_btn *lptr = NULL;
+
+	while (ptr) {
+		lptr = ptr;
+		ptr = ptr->next;
+		kfree(lptr->name);
+		kfree(lptr);
+	}
+
+	return;
+}
+
+/* ACPI Driver functions */
+static void quickstart_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct quickstart_acpi *quickstart = data;
+
+	if (!quickstart)
+		return;
+
+	if (event == QUICKSTART_EVENT_WAKE)
+		quickstart_data.pressed = quickstart->btn;
+	else if (event == QUICKSTART_EVENT_RUNTIME) {
+		input_report_key(quickstart_input, quickstart->btn->id, 1);
+		input_sync(quickstart_input);
+		input_report_key(quickstart_input, quickstart->btn->id, 0);
+		input_sync(quickstart_input);
+	}
+	return;
+}
+
+static void quickstart_acpi_ghid(struct quickstart_acpi *quickstart)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	uint32_t usageid = 0;
+
+	if (!quickstart)
+		return;
+
+	/* This returns a buffer telling the button usage ID,
+	 * and triggers pending notify events (The ones before booting). */
+	status = acpi_evaluate_object(quickstart->device->handle,
+					"GHID", NULL, &buffer);
+	if (ACPI_FAILURE(status) || !buffer.pointer) {
+		printk(KERN_ERR "quickstart: %s GHID method failed.\n",
+		       quickstart->btn->name);
+		return;
+	}
+
+	if (buffer.length < 8)
+		return;
+
+	/* <<The GHID method can return a BYTE, WORD, or DWORD.
+	 * The value must be encoded in little-endian byte
+	 * order (least significant byte first).>> */
+	usageid = *((uint32_t *)(buffer.pointer + (buffer.length - 8)));
+	quickstart->btn->id = usageid;
+
+	kfree(buffer.pointer);
+}
+
+static int quickstart_acpi_config(struct quickstart_acpi *quickstart, char *bid)
+{
+	int len = strlen(bid);
+	int ret;
+
+	/* Add button to list */
+	ret = quickstart_btnlst_add(&quickstart->btn);
+	if (ret)
+		return ret;
+
+	quickstart->btn->name = kzalloc(len + 1, GFP_KERNEL);
+	if (!quickstart->btn->name) {
+		quickstart_btnlst_free();
+		return -ENOMEM;
+	}
+	strcpy(quickstart->btn->name, bid);
+
+	return 0;
+}
+
+static int quickstart_acpi_add(struct acpi_device *device)
+{
+	int ret = 0;
+	acpi_status status = AE_OK;
+	struct quickstart_acpi *quickstart = NULL;
+
+	if (!device)
+		return -EINVAL;
+
+	quickstart = kzalloc(sizeof(struct quickstart_acpi), GFP_KERNEL);
+	if (!quickstart)
+		return -ENOMEM;
+
+	quickstart->device = device;
+	strcpy(acpi_device_name(device), QUICKSTART_ACPI_DEVICE_NAME);
+	strcpy(acpi_device_class(device), QUICKSTART_ACPI_CLASS);
+	device->driver_data = quickstart;
+
+	/* Add button to list and initialize some stuff */
+	ret = quickstart_acpi_config(quickstart, acpi_device_bid(device));
+	if (ret)
+		goto fail_config;
+
+	status = acpi_install_notify_handler(device->handle,
+						ACPI_ALL_NOTIFY,
+						quickstart_acpi_notify,
+						quickstart);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR "quickstart: Notify handler install error\n");
+		ret = -ENODEV;
+		goto fail_installnotify;
+	}
+
+	quickstart_acpi_ghid(quickstart);
+
+	return 0;
+
+fail_installnotify:
+	quickstart_btnlst_del(quickstart->btn);
+
+fail_config:
+
+	kfree(quickstart);
+
+	return ret;
+}
+
+static int quickstart_acpi_remove(struct acpi_device *device, int type)
+{
+	acpi_status status = 0;
+	struct quickstart_acpi *quickstart = NULL;
+
+	if (!device || !acpi_driver_data(device))
+		return -EINVAL;
+
+	quickstart = acpi_driver_data(device);
+
+	status = acpi_remove_notify_handler(device->handle,
+						 ACPI_ALL_NOTIFY,
+					    quickstart_acpi_notify);
+	if (ACPI_FAILURE(status))
+		printk(KERN_ERR "quickstart: Error removing notify handler\n");
+
+
+	kfree(quickstart);
+
+	return 0;
+}
+
+/* Module functions */
+
+static void quickstart_exit(void)
+{
+	input_unregister_device(quickstart_input);
+	input_free_device(quickstart_input);
+
+	device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
+	device_remove_file(&pf_device->dev, &dev_attr_buttons);
+
+	platform_device_unregister(pf_device);
+
+	platform_driver_unregister(&pf_driver);
+
+	acpi_bus_unregister_driver(&quickstart_acpi_driver);
+
+	quickstart_btnlst_free();
+
+	return;
+}
+
+static int __init quickstart_init_input(void)
+{
+	struct quickstart_btn **ptr = &quickstart_data.btn_lst;
+	int count;
+
+	quickstart_input = input_allocate_device();
+
+	if (!quickstart_input)
+		return -ENOMEM;
+
+	quickstart_input->name = "Quickstart ACPI Buttons";
+	quickstart_input->id.bustype = BUS_HOST;
+
+	while (*ptr) {
+		count++;
+		set_bit(EV_KEY, quickstart_input->evbit);
+		set_bit((*ptr)->id, quickstart_input->keybit);
+		ptr = &((*ptr)->next);
+	}
+
+	return input_register_device(quickstart_input);
+}
+
+static int __init quickstart_init(void)
+{
+	int ret;
+	acpi_status status = 0;
+
+	/* ACPI Check */
+	if (acpi_disabled)
+		return -ENODEV;
+
+	/* ACPI driver register */
+	status = acpi_bus_register_driver(&quickstart_acpi_driver);
+	if (status < 0)
+		return -ENODEV;
+
+	/* If existing bus with no devices */
+	if (!quickstart_data.btn_lst) {
+		ret = -ENODEV;
+		goto fail_pfdrv_reg;
+	}
+
+	/* Platform driver register */
+	ret = platform_driver_register(&pf_driver);
+	if (ret)
+		goto fail_pfdrv_reg;
+
+	/* Platform device register */
+	pf_device = platform_device_alloc(QUICKSTART_PF_DEVICE_NAME, -1);
+	if (!pf_device) {
+		ret = -ENOMEM;
+		goto fail_pfdev_alloc;
+	}
+	ret = platform_device_add(pf_device);
+	if (ret)
+		goto fail_pfdev_add;
+
+	/* Create device sysfs file */
+	ret = device_create_file(&pf_device->dev, &dev_attr_pressed_button);
+	if (ret)
+		goto fail_dev_file;
+
+	ret = device_create_file(&pf_device->dev, &dev_attr_buttons);
+	if (ret)
+		goto fail_dev_file2;
+
+
+	/* Input device */
+	ret = quickstart_init_input();
+	if (ret)
+		goto fail_input;
+
+	printk(KERN_INFO "quickstart: ACPI Direct App Launch ver %s\n",
+						QUICKSTART_VERSION);
+
+	return 0;
+fail_input:
+	device_remove_file(&pf_device->dev, &dev_attr_buttons);
+
+fail_dev_file2:
+	device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
+
+fail_dev_file:
+	platform_device_del(pf_device);
+
+fail_pfdev_add:
+	platform_device_put(pf_device);
+
+fail_pfdev_alloc:
+	platform_driver_unregister(&pf_driver);
+
+fail_pfdrv_reg:
+	acpi_bus_unregister_driver(&quickstart_acpi_driver);
+
+	return ret;
+}
+
+module_init(quickstart_init);
+module_exit(quickstart_exit);
diff --git a/drivers/staging/ramzswap/Kconfig b/drivers/staging/ramzswap/Kconfig
deleted file mode 100644
index 127b3c6c959..00000000000
--- a/drivers/staging/ramzswap/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-config RAMZSWAP
-	tristate "Compressed in-memory swap device (ramzswap)"
-	depends on SWAP
-	select LZO_COMPRESS
-	select LZO_DECOMPRESS
-	default n
-	help
-	  Creates virtual block devices which can (only) be used as swap
-	  disks. Pages swapped to these disks are compressed and stored in
-	  memory itself.
-
-	  See ramzswap.txt for more information.
-	  Project home: http://compcache.googlecode.com/
-
-config RAMZSWAP_STATS
-	bool "Enable ramzswap stats"
-	depends on RAMZSWAP
-	default y
-	help
-	  Enable statistics collection for ramzswap. This adds only a minimal
-	  overhead. In unsure, say Y.
diff --git a/drivers/staging/ramzswap/Makefile b/drivers/staging/ramzswap/Makefile
deleted file mode 100644
index 507d7dc3b86..00000000000
--- a/drivers/staging/ramzswap/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-ramzswap-objs	:=	ramzswap_drv.o xvmalloc.o
-
-obj-$(CONFIG_RAMZSWAP)	+=	ramzswap.o
diff --git a/drivers/staging/ramzswap/ramzswap.txt b/drivers/staging/ramzswap/ramzswap.txt
deleted file mode 100644
index 9694acfeb43..00000000000
--- a/drivers/staging/ramzswap/ramzswap.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-ramzswap: Compressed RAM based swap device
--------------------------------------------
-
-Project home: http://compcache.googlecode.com/
-
-* Introduction
-
-The ramzswap module creates RAM based block devices which can (only) be used as
-swap disks. Pages swapped to these devices are compressed and stored in memory
-itself. See project home for use cases, performance numbers and a lot more.
-
-Individual ramzswap devices are configured and initialized using rzscontrol
-userspace utility as shown in examples below. See rzscontrol man page for more
-details.
-
-* Usage
-
-Following shows a typical sequence of steps for using ramzswap.
-
-1) Load Modules:
-	modprobe ramzswap num_devices=4
-	This creates 4 (uninitialized) devices: /dev/ramzswap{0,1,2,3}
-	(num_devices parameter is optional. Default: 1)
-
-2) Initialize:
-	Use rzscontrol utility to configure and initialize individual
-	ramzswap devices. Example:
-	rzscontrol /dev/ramzswap2 --init # uses default value of disksize_kb
-
-	*See rzscontrol man page for more details and examples*
-
-3) Activate:
-	swapon /dev/ramzswap2 # or any other initialized ramzswap device
-
-4) Stats:
-	rzscontrol /dev/ramzswap2 --stats
-
-5) Deactivate:
-	swapoff /dev/ramzswap2
-
-6) Reset:
-	rzscontrol /dev/ramzswap2 --reset
-	(This frees all the memory allocated for this device).
-
-
-Please report any problems at:
- - Mailing list: linux-mm-cc at laptop dot org
- - Issue tracker: http://code.google.com/p/compcache/issues/list
-
-Nitin Gupta
-ngupta@vflare.org
diff --git a/drivers/staging/ramzswap/ramzswap_drv.c b/drivers/staging/ramzswap/ramzswap_drv.c
deleted file mode 100644
index d14bf9129e3..00000000000
--- a/drivers/staging/ramzswap/ramzswap_drv.c
+++ /dev/null
@@ -1,837 +0,0 @@
-/*
- * Compressed RAM based swap device
- *
- * Copyright (C) 2008, 2009, 2010  Nitin Gupta
- *
- * This code is released using a dual license strategy: BSD/GPL
- * You can choose the licence that better fits your requirements.
- *
- * Released under the terms of 3-clause BSD License
- * Released under the terms of GNU General Public License Version 2.0
- *
- * Project home: http://compcache.googlecode.com
- */
-
-#define KMSG_COMPONENT "ramzswap"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
-#include <linux/device.h>
-#include <linux/genhd.h>
-#include <linux/highmem.h>
-#include <linux/slab.h>
-#include <linux/lzo.h>
-#include <linux/string.h>
-#include <linux/swap.h>
-#include <linux/swapops.h>
-#include <linux/vmalloc.h>
-
-#include "ramzswap_drv.h"
-
-/* Globals */
-static int ramzswap_major;
-static struct ramzswap *devices;
-
-/* Module params (documentation at end) */
-static unsigned int num_devices;
-
-static int rzs_test_flag(struct ramzswap *rzs, u32 index,
-			enum rzs_pageflags flag)
-{
-	return rzs->table[index].flags & BIT(flag);
-}
-
-static void rzs_set_flag(struct ramzswap *rzs, u32 index,
-			enum rzs_pageflags flag)
-{
-	rzs->table[index].flags |= BIT(flag);
-}
-
-static void rzs_clear_flag(struct ramzswap *rzs, u32 index,
-			enum rzs_pageflags flag)
-{
-	rzs->table[index].flags &= ~BIT(flag);
-}
-
-static int page_zero_filled(void *ptr)
-{
-	unsigned int pos;
-	unsigned long *page;
-
-	page = (unsigned long *)ptr;
-
-	for (pos = 0; pos != PAGE_SIZE / sizeof(*page); pos++) {
-		if (page[pos])
-			return 0;
-	}
-
-	return 1;
-}
-
-static void ramzswap_set_disksize(struct ramzswap *rzs, size_t totalram_bytes)
-{
-	if (!rzs->disksize) {
-		pr_info(
-		"disk size not provided. You can use disksize_kb module "
-		"param to specify size.\nUsing default: (%u%% of RAM).\n",
-		default_disksize_perc_ram
-		);
-		rzs->disksize = default_disksize_perc_ram *
-					(totalram_bytes / 100);
-	}
-
-	if (rzs->disksize > 2 * (totalram_bytes)) {
-		pr_info(
-		"There is little point creating a ramzswap of greater than "
-		"twice the size of memory since we expect a 2:1 compression "
-		"ratio. Note that ramzswap uses about 0.1%% of the size of "
-		"the swap device when not in use so a huge ramzswap is "
-		"wasteful.\n"
-		"\tMemory Size: %zu kB\n"
-		"\tSize you selected: %zu kB\n"
-		"Continuing anyway ...\n",
-		totalram_bytes >> 10, rzs->disksize
-		);
-	}
-
-	rzs->disksize &= PAGE_MASK;
-}
-
-/*
- * Swap header (1st page of swap device) contains information
- * about a swap file/partition. Prepare such a header for the
- * given ramzswap device so that swapon can identify it as a
- * swap partition.
- */
-static void setup_swap_header(struct ramzswap *rzs, union swap_header *s)
-{
-	s->info.version = 1;
-	s->info.last_page = (rzs->disksize >> PAGE_SHIFT) - 1;
-	s->info.nr_badpages = 0;
-	memcpy(s->magic.magic, "SWAPSPACE2", 10);
-}
-
-static void ramzswap_ioctl_get_stats(struct ramzswap *rzs,
-			struct ramzswap_ioctl_stats *s)
-{
-	s->disksize = rzs->disksize;
-
-#if defined(CONFIG_RAMZSWAP_STATS)
-	{
-	struct ramzswap_stats *rs = &rzs->stats;
-	size_t succ_writes, mem_used;
-	unsigned int good_compress_perc = 0, no_compress_perc = 0;
-
-	mem_used = xv_get_total_size_bytes(rzs->mem_pool)
-			+ (rs->pages_expand << PAGE_SHIFT);
-	succ_writes = rzs_stat64_read(rzs, &rs->num_writes) -
-			rzs_stat64_read(rzs, &rs->failed_writes);
-
-	if (succ_writes && rs->pages_stored) {
-		good_compress_perc = rs->good_compress * 100
-					/ rs->pages_stored;
-		no_compress_perc = rs->pages_expand * 100
-					/ rs->pages_stored;
-	}
-
-	s->num_reads = rzs_stat64_read(rzs, &rs->num_reads);
-	s->num_writes = rzs_stat64_read(rzs, &rs->num_writes);
-	s->failed_reads = rzs_stat64_read(rzs, &rs->failed_reads);
-	s->failed_writes = rzs_stat64_read(rzs, &rs->failed_writes);
-	s->invalid_io = rzs_stat64_read(rzs, &rs->invalid_io);
-	s->notify_free = rzs_stat64_read(rzs, &rs->notify_free);
-	s->pages_zero = rs->pages_zero;
-
-	s->good_compress_pct = good_compress_perc;
-	s->pages_expand_pct = no_compress_perc;
-
-	s->pages_stored = rs->pages_stored;
-	s->pages_used = mem_used >> PAGE_SHIFT;
-	s->orig_data_size = rs->pages_stored << PAGE_SHIFT;
-	s->compr_data_size = rs->compr_size;
-	s->mem_used_total = mem_used;
-	}
-#endif /* CONFIG_RAMZSWAP_STATS */
-}
-
-static void ramzswap_free_page(struct ramzswap *rzs, size_t index)
-{
-	u32 clen;
-	void *obj;
-
-	struct page *page = rzs->table[index].page;
-	u32 offset = rzs->table[index].offset;
-
-	if (unlikely(!page)) {
-		/*
-		 * No memory is allocated for zero filled pages.
-		 * Simply clear zero page flag.
-		 */
-		if (rzs_test_flag(rzs, index, RZS_ZERO)) {
-			rzs_clear_flag(rzs, index, RZS_ZERO);
-			rzs_stat_dec(&rzs->stats.pages_zero);
-		}
-		return;
-	}
-
-	if (unlikely(rzs_test_flag(rzs, index, RZS_UNCOMPRESSED))) {
-		clen = PAGE_SIZE;
-		__free_page(page);
-		rzs_clear_flag(rzs, index, RZS_UNCOMPRESSED);
-		rzs_stat_dec(&rzs->stats.pages_expand);
-		goto out;
-	}
-
-	obj = kmap_atomic(page, KM_USER0) + offset;
-	clen = xv_get_object_size(obj) - sizeof(struct zobj_header);
-	kunmap_atomic(obj, KM_USER0);
-
-	xv_free(rzs->mem_pool, page, offset);
-	if (clen <= PAGE_SIZE / 2)
-		rzs_stat_dec(&rzs->stats.good_compress);
-
-out:
-	rzs->stats.compr_size -= clen;
-	rzs_stat_dec(&rzs->stats.pages_stored);
-
-	rzs->table[index].page = NULL;
-	rzs->table[index].offset = 0;
-}
-
-static int handle_zero_page(struct bio *bio)
-{
-	void *user_mem;
-	struct page *page = bio->bi_io_vec[0].bv_page;
-
-	user_mem = kmap_atomic(page, KM_USER0);
-	memset(user_mem, 0, PAGE_SIZE);
-	kunmap_atomic(user_mem, KM_USER0);
-
-	flush_dcache_page(page);
-
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return 0;
-}
-
-static int handle_uncompressed_page(struct ramzswap *rzs, struct bio *bio)
-{
-	u32 index;
-	struct page *page;
-	unsigned char *user_mem, *cmem;
-
-	page = bio->bi_io_vec[0].bv_page;
-	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
-
-	user_mem = kmap_atomic(page, KM_USER0);
-	cmem = kmap_atomic(rzs->table[index].page, KM_USER1) +
-			rzs->table[index].offset;
-
-	memcpy(user_mem, cmem, PAGE_SIZE);
-	kunmap_atomic(user_mem, KM_USER0);
-	kunmap_atomic(cmem, KM_USER1);
-
-	flush_dcache_page(page);
-
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return 0;
-}
-
-/*
- * Called when request page is not present in ramzswap.
- * This is an attempt to read before any previous write
- * to this location - this happens due to readahead when
- * swap device is read from user-space (e.g. during swapon)
- */
-static int handle_ramzswap_fault(struct ramzswap *rzs, struct bio *bio)
-{
-	pr_debug("Read before write on swap device: "
-		"sector=%lu, size=%u, offset=%u\n",
-		(ulong)(bio->bi_sector), bio->bi_size,
-		bio->bi_io_vec[0].bv_offset);
-
-	/* Do nothing. Just return success */
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return 0;
-}
-
-static int ramzswap_read(struct ramzswap *rzs, struct bio *bio)
-{
-	int ret;
-	u32 index;
-	size_t clen;
-	struct page *page;
-	struct zobj_header *zheader;
-	unsigned char *user_mem, *cmem;
-
-	rzs_stat64_inc(rzs, &rzs->stats.num_reads);
-
-	page = bio->bi_io_vec[0].bv_page;
-	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
-
-	if (rzs_test_flag(rzs, index, RZS_ZERO))
-		return handle_zero_page(bio);
-
-	/* Requested page is not present in compressed area */
-	if (!rzs->table[index].page)
-		return handle_ramzswap_fault(rzs, bio);
-
-	/* Page is stored uncompressed since it's incompressible */
-	if (unlikely(rzs_test_flag(rzs, index, RZS_UNCOMPRESSED)))
-		return handle_uncompressed_page(rzs, bio);
-
-	user_mem = kmap_atomic(page, KM_USER0);
-	clen = PAGE_SIZE;
-
-	cmem = kmap_atomic(rzs->table[index].page, KM_USER1) +
-			rzs->table[index].offset;
-
-	ret = lzo1x_decompress_safe(
-		cmem + sizeof(*zheader),
-		xv_get_object_size(cmem) - sizeof(*zheader),
-		user_mem, &clen);
-
-	kunmap_atomic(user_mem, KM_USER0);
-	kunmap_atomic(cmem, KM_USER1);
-
-	/* should NEVER happen */
-	if (unlikely(ret != LZO_E_OK)) {
-		pr_err("Decompression failed! err=%d, page=%u\n",
-			ret, index);
-		rzs_stat64_inc(rzs, &rzs->stats.failed_reads);
-		goto out;
-	}
-
-	flush_dcache_page(page);
-
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return 0;
-
-out:
-	bio_io_error(bio);
-	return 0;
-}
-
-static int ramzswap_write(struct ramzswap *rzs, struct bio *bio)
-{
-	int ret;
-	u32 offset, index;
-	size_t clen;
-	struct zobj_header *zheader;
-	struct page *page, *page_store;
-	unsigned char *user_mem, *cmem, *src;
-
-	rzs_stat64_inc(rzs, &rzs->stats.num_writes);
-
-	page = bio->bi_io_vec[0].bv_page;
-	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
-
-	src = rzs->compress_buffer;
-
-	mutex_lock(&rzs->lock);
-
-	user_mem = kmap_atomic(page, KM_USER0);
-	if (page_zero_filled(user_mem)) {
-		kunmap_atomic(user_mem, KM_USER0);
-		mutex_unlock(&rzs->lock);
-		rzs_stat_inc(&rzs->stats.pages_zero);
-		rzs_set_flag(rzs, index, RZS_ZERO);
-
-		set_bit(BIO_UPTODATE, &bio->bi_flags);
-		bio_endio(bio, 0);
-		return 0;
-	}
-
-	ret = lzo1x_1_compress(user_mem, PAGE_SIZE, src, &clen,
-				rzs->compress_workmem);
-
-	kunmap_atomic(user_mem, KM_USER0);
-
-	if (unlikely(ret != LZO_E_OK)) {
-		mutex_unlock(&rzs->lock);
-		pr_err("Compression failed! err=%d\n", ret);
-		rzs_stat64_inc(rzs, &rzs->stats.failed_writes);
-		goto out;
-	}
-
-	/*
-	 * Page is incompressible. Store it as-is (uncompressed)
-	 * since we do not want to return too many swap write
-	 * errors which has side effect of hanging the system.
-	 */
-	if (unlikely(clen > max_zpage_size)) {
-		clen = PAGE_SIZE;
-		page_store = alloc_page(GFP_NOIO | __GFP_HIGHMEM);
-		if (unlikely(!page_store)) {
-			mutex_unlock(&rzs->lock);
-			pr_info("Error allocating memory for incompressible "
-				"page: %u\n", index);
-			rzs_stat64_inc(rzs, &rzs->stats.failed_writes);
-			goto out;
-		}
-
-		offset = 0;
-		rzs_set_flag(rzs, index, RZS_UNCOMPRESSED);
-		rzs_stat_inc(&rzs->stats.pages_expand);
-		rzs->table[index].page = page_store;
-		src = kmap_atomic(page, KM_USER0);
-		goto memstore;
-	}
-
-	if (xv_malloc(rzs->mem_pool, clen + sizeof(*zheader),
-			&rzs->table[index].page, &offset,
-			GFP_NOIO | __GFP_HIGHMEM)) {
-		mutex_unlock(&rzs->lock);
-		pr_info("Error allocating memory for compressed "
-			"page: %u, size=%zu\n", index, clen);
-		rzs_stat64_inc(rzs, &rzs->stats.failed_writes);
-		goto out;
-	}
-
-memstore:
-	rzs->table[index].offset = offset;
-
-	cmem = kmap_atomic(rzs->table[index].page, KM_USER1) +
-			rzs->table[index].offset;
-
-#if 0
-	/* Back-reference needed for memory defragmentation */
-	if (!rzs_test_flag(rzs, index, RZS_UNCOMPRESSED)) {
-		zheader = (struct zobj_header *)cmem;
-		zheader->table_idx = index;
-		cmem += sizeof(*zheader);
-	}
-#endif
-
-	memcpy(cmem, src, clen);
-
-	kunmap_atomic(cmem, KM_USER1);
-	if (unlikely(rzs_test_flag(rzs, index, RZS_UNCOMPRESSED)))
-		kunmap_atomic(src, KM_USER0);
-
-	/* Update stats */
-	rzs->stats.compr_size += clen;
-	rzs_stat_inc(&rzs->stats.pages_stored);
-	if (clen <= PAGE_SIZE / 2)
-		rzs_stat_inc(&rzs->stats.good_compress);
-
-	mutex_unlock(&rzs->lock);
-
-	set_bit(BIO_UPTODATE, &bio->bi_flags);
-	bio_endio(bio, 0);
-	return 0;
-
-out:
-	bio_io_error(bio);
-	return 0;
-}
-
-/*
- * Check if request is within bounds and page aligned.
- */
-static inline int valid_swap_request(struct ramzswap *rzs, struct bio *bio)
-{
-	if (unlikely(
-		(bio->bi_sector >= (rzs->disksize >> SECTOR_SHIFT)) ||
-		(bio->bi_sector & (SECTORS_PER_PAGE - 1)) ||
-		(bio->bi_vcnt != 1) ||
-		(bio->bi_size != PAGE_SIZE) ||
-		(bio->bi_io_vec[0].bv_offset != 0))) {
-
-		return 0;
-	}
-
-	/* swap request is valid */
-	return 1;
-}
-
-/*
- * Handler function for all ramzswap I/O requests.
- */
-static int ramzswap_make_request(struct request_queue *queue, struct bio *bio)
-{
-	int ret = 0;
-	struct ramzswap *rzs = queue->queuedata;
-
-	if (unlikely(!rzs->init_done)) {
-		bio_io_error(bio);
-		return 0;
-	}
-
-	if (!valid_swap_request(rzs, bio)) {
-		rzs_stat64_inc(rzs, &rzs->stats.invalid_io);
-		bio_io_error(bio);
-		return 0;
-	}
-
-	switch (bio_data_dir(bio)) {
-	case READ:
-		ret = ramzswap_read(rzs, bio);
-		break;
-
-	case WRITE:
-		ret = ramzswap_write(rzs, bio);
-		break;
-	}
-
-	return ret;
-}
-
-static void reset_device(struct ramzswap *rzs)
-{
-	size_t index;
-
-	/* Do not accept any new I/O request */
-	rzs->init_done = 0;
-
-	/* Free various per-device buffers */
-	kfree(rzs->compress_workmem);
-	free_pages((unsigned long)rzs->compress_buffer, 1);
-
-	rzs->compress_workmem = NULL;
-	rzs->compress_buffer = NULL;
-
-	/* Free all pages that are still in this ramzswap device */
-	for (index = 0; index < rzs->disksize >> PAGE_SHIFT; index++) {
-		struct page *page;
-		u16 offset;
-
-		page = rzs->table[index].page;
-		offset = rzs->table[index].offset;
-
-		if (!page)
-			continue;
-
-		if (unlikely(rzs_test_flag(rzs, index, RZS_UNCOMPRESSED)))
-			__free_page(page);
-		else
-			xv_free(rzs->mem_pool, page, offset);
-	}
-
-	vfree(rzs->table);
-	rzs->table = NULL;
-
-	xv_destroy_pool(rzs->mem_pool);
-	rzs->mem_pool = NULL;
-
-	/* Reset stats */
-	memset(&rzs->stats, 0, sizeof(rzs->stats));
-
-	rzs->disksize = 0;
-}
-
-static int ramzswap_ioctl_init_device(struct ramzswap *rzs)
-{
-	int ret;
-	size_t num_pages;
-	struct page *page;
-	union swap_header *swap_header;
-
-	if (rzs->init_done) {
-		pr_info("Device already initialized!\n");
-		return -EBUSY;
-	}
-
-	ramzswap_set_disksize(rzs, totalram_pages << PAGE_SHIFT);
-
-	rzs->compress_workmem = kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
-	if (!rzs->compress_workmem) {
-		pr_err("Error allocating compressor working memory!\n");
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	rzs->compress_buffer = (void *)__get_free_pages(__GFP_ZERO, 1);
-	if (!rzs->compress_buffer) {
-		pr_err("Error allocating compressor buffer space\n");
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	num_pages = rzs->disksize >> PAGE_SHIFT;
-	rzs->table = vmalloc(num_pages * sizeof(*rzs->table));
-	if (!rzs->table) {
-		pr_err("Error allocating ramzswap address table\n");
-		/* To prevent accessing table entries during cleanup */
-		rzs->disksize = 0;
-		ret = -ENOMEM;
-		goto fail;
-	}
-	memset(rzs->table, 0, num_pages * sizeof(*rzs->table));
-
-	page = alloc_page(__GFP_ZERO);
-	if (!page) {
-		pr_err("Error allocating swap header page\n");
-		ret = -ENOMEM;
-		goto fail;
-	}
-	rzs->table[0].page = page;
-	rzs_set_flag(rzs, 0, RZS_UNCOMPRESSED);
-
-	swap_header = kmap(page);
-	setup_swap_header(rzs, swap_header);
-	kunmap(page);
-
-	set_capacity(rzs->disk, rzs->disksize >> SECTOR_SHIFT);
-
-	/* ramzswap devices sort of resembles non-rotational disks */
-	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, rzs->disk->queue);
-
-	rzs->mem_pool = xv_create_pool();
-	if (!rzs->mem_pool) {
-		pr_err("Error creating memory pool\n");
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	rzs->init_done = 1;
-
-	pr_debug("Initialization done!\n");
-	return 0;
-
-fail:
-	reset_device(rzs);
-
-	pr_err("Initialization failed: err=%d\n", ret);
-	return ret;
-}
-
-static int ramzswap_ioctl_reset_device(struct ramzswap *rzs)
-{
-	if (rzs->init_done)
-		reset_device(rzs);
-
-	return 0;
-}
-
-static int ramzswap_ioctl(struct block_device *bdev, fmode_t mode,
-			unsigned int cmd, unsigned long arg)
-{
-	int ret = 0;
-	size_t disksize_kb;
-
-	struct ramzswap *rzs = bdev->bd_disk->private_data;
-
-	switch (cmd) {
-	case RZSIO_SET_DISKSIZE_KB:
-		if (rzs->init_done) {
-			ret = -EBUSY;
-			goto out;
-		}
-		if (copy_from_user(&disksize_kb, (void *)arg,
-						_IOC_SIZE(cmd))) {
-			ret = -EFAULT;
-			goto out;
-		}
-		rzs->disksize = disksize_kb << 10;
-		pr_info("Disk size set to %zu kB\n", disksize_kb);
-		break;
-
-	case RZSIO_GET_STATS:
-	{
-		struct ramzswap_ioctl_stats *stats;
-		if (!rzs->init_done) {
-			ret = -ENOTTY;
-			goto out;
-		}
-		stats = kzalloc(sizeof(*stats), GFP_KERNEL);
-		if (!stats) {
-			ret = -ENOMEM;
-			goto out;
-		}
-		ramzswap_ioctl_get_stats(rzs, stats);
-		if (copy_to_user((void *)arg, stats, sizeof(*stats))) {
-			kfree(stats);
-			ret = -EFAULT;
-			goto out;
-		}
-		kfree(stats);
-		break;
-	}
-	case RZSIO_INIT:
-		ret = ramzswap_ioctl_init_device(rzs);
-		break;
-
-	case RZSIO_RESET:
-		/* Do not reset an active device! */
-		if (bdev->bd_holders) {
-			ret = -EBUSY;
-			goto out;
-		}
-
-		/* Make sure all pending I/O is finished */
-		if (bdev)
-			fsync_bdev(bdev);
-
-		ret = ramzswap_ioctl_reset_device(rzs);
-		break;
-
-	default:
-		pr_info("Invalid ioctl %u\n", cmd);
-		ret = -ENOTTY;
-	}
-
-out:
-	return ret;
-}
-
-void ramzswap_slot_free_notify(struct block_device *bdev, unsigned long index)
-{
-	struct ramzswap *rzs;
-
-	rzs = bdev->bd_disk->private_data;
-	ramzswap_free_page(rzs, index);
-	rzs_stat64_inc(rzs, &rzs->stats.notify_free);
-
-	return;
-}
-
-static struct block_device_operations ramzswap_devops = {
-	.ioctl = ramzswap_ioctl,
-	.swap_slot_free_notify = ramzswap_slot_free_notify,
-	.owner = THIS_MODULE
-};
-
-static int create_device(struct ramzswap *rzs, int device_id)
-{
-	int ret = 0;
-
-	mutex_init(&rzs->lock);
-	spin_lock_init(&rzs->stat64_lock);
-
-	rzs->queue = blk_alloc_queue(GFP_KERNEL);
-	if (!rzs->queue) {
-		pr_err("Error allocating disk queue for device %d\n",
-			device_id);
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	blk_queue_make_request(rzs->queue, ramzswap_make_request);
-	rzs->queue->queuedata = rzs;
-
-	 /* gendisk structure */
-	rzs->disk = alloc_disk(1);
-	if (!rzs->disk) {
-		blk_cleanup_queue(rzs->queue);
-		pr_warning("Error allocating disk structure for device %d\n",
-			device_id);
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	rzs->disk->major = ramzswap_major;
-	rzs->disk->first_minor = device_id;
-	rzs->disk->fops = &ramzswap_devops;
-	rzs->disk->queue = rzs->queue;
-	rzs->disk->private_data = rzs;
-	snprintf(rzs->disk->disk_name, 16, "ramzswap%d", device_id);
-
-	/* Actual capacity set using RZSIO_SET_DISKSIZE_KB ioctl */
-	set_capacity(rzs->disk, 0);
-
-	blk_queue_physical_block_size(rzs->disk->queue, PAGE_SIZE);
-	blk_queue_logical_block_size(rzs->disk->queue, PAGE_SIZE);
-
-	add_disk(rzs->disk);
-
-	rzs->init_done = 0;
-
-out:
-	return ret;
-}
-
-static void destroy_device(struct ramzswap *rzs)
-{
-	if (rzs->disk) {
-		del_gendisk(rzs->disk);
-		put_disk(rzs->disk);
-	}
-
-	if (rzs->queue)
-		blk_cleanup_queue(rzs->queue);
-}
-
-static int __init ramzswap_init(void)
-{
-	int ret, dev_id;
-
-	if (num_devices > max_num_devices) {
-		pr_warning("Invalid value for num_devices: %u\n",
-				num_devices);
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ramzswap_major = register_blkdev(0, "ramzswap");
-	if (ramzswap_major <= 0) {
-		pr_warning("Unable to get major number\n");
-		ret = -EBUSY;
-		goto out;
-	}
-
-	if (!num_devices) {
-		pr_info("num_devices not specified. Using default: 1\n");
-		num_devices = 1;
-	}
-
-	/* Allocate the device array and initialize each one */
-	pr_info("Creating %u devices ...\n", num_devices);
-	devices = kzalloc(num_devices * sizeof(struct ramzswap), GFP_KERNEL);
-	if (!devices) {
-		ret = -ENOMEM;
-		goto unregister;
-	}
-
-	for (dev_id = 0; dev_id < num_devices; dev_id++) {
-		ret = create_device(&devices[dev_id], dev_id);
-		if (ret)
-			goto free_devices;
-	}
-
-	return 0;
-
-free_devices:
-	while (dev_id)
-		destroy_device(&devices[--dev_id]);
-unregister:
-	unregister_blkdev(ramzswap_major, "ramzswap");
-out:
-	return ret;
-}
-
-static void __exit ramzswap_exit(void)
-{
-	int i;
-	struct ramzswap *rzs;
-
-	for (i = 0; i < num_devices; i++) {
-		rzs = &devices[i];
-
-		destroy_device(rzs);
-		if (rzs->init_done)
-			reset_device(rzs);
-	}
-
-	unregister_blkdev(ramzswap_major, "ramzswap");
-
-	kfree(devices);
-	pr_debug("Cleanup done!\n");
-}
-
-module_param(num_devices, uint, 0);
-MODULE_PARM_DESC(num_devices, "Number of ramzswap devices");
-
-module_init(ramzswap_init);
-module_exit(ramzswap_exit);
-
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("Nitin Gupta <ngupta@vflare.org>");
-MODULE_DESCRIPTION("Compressed RAM Based Swap Device");
diff --git a/drivers/staging/rt2860/ap.h b/drivers/staging/rt2860/ap.h
index 3f744a52aac..faac85d931d 100644
--- a/drivers/staging/rt2860/ap.h
+++ b/drivers/staging/rt2860/ap.h
@@ -42,7 +42,8 @@
 
 /* ap_wpa.c */
 void WpaStateMachineInit(struct rt_rtmp_adapter *pAd,
-			 struct rt_state_machine *Sm, OUT STATE_MACHINE_FUNC Trans[]);
+			 struct rt_state_machine *Sm,
+			 OUT STATE_MACHINE_FUNC Trans[]);
 
 #ifdef RTMP_MAC_USB
 void BeaconUpdateExec(void *SystemSpecific1,
@@ -61,6 +62,7 @@ struct rt_mac_table_entry *MacTableInsertEntry(struct rt_rtmp_adapter *pAd,
 BOOLEAN MacTableDeleteEntry(struct rt_rtmp_adapter *pAd,
 			    u16 wcid, u8 *pAddr);
 
-struct rt_mac_table_entry *MacTableLookup(struct rt_rtmp_adapter *pAd, u8 *pAddr);
+struct rt_mac_table_entry *MacTableLookup(struct rt_rtmp_adapter *pAd,
+								u8 *pAddr);
 
 #endif /* __AP_H__ */
diff --git a/drivers/staging/rt2860/chlist.h b/drivers/staging/rt2860/chlist.h
index ada65e5ac61..1231e69d518 100644
--- a/drivers/staging/rt2860/chlist.h
+++ b/drivers/staging/rt2860/chlist.h
@@ -73,35 +73,31 @@ struct rt_ch_freq_map {
 extern struct rt_ch_freq_map CH_HZ_ID_MAP[];
 extern int CH_HZ_ID_MAP_NUM;
 
-#define     MAP_CHANNEL_ID_TO_KHZ(_ch, _khz)					\
-		do{													\
-			int _chIdx;											\
-			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++)\
-			{													\
-				if ((_ch) == CH_HZ_ID_MAP[_chIdx].channel)			\
-				{												\
-					(_khz) = CH_HZ_ID_MAP[_chIdx].freqKHz * 1000;	\
-					break;										\
-				}												\
-			}													\
-			if (_chIdx == CH_HZ_ID_MAP_NUM)					\
-				(_khz) = 2412000;									\
-            }while(0)
+#define     MAP_CHANNEL_ID_TO_KHZ(_ch, _khz)		\
+		do {							\
+			int _chIdx;					\
+			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++) {\
+				if ((_ch) == CH_HZ_ID_MAP[_chIdx].channel) { \
+					(_khz) = CH_HZ_ID_MAP[_chIdx].freqKHz * 1000;\
+					break;				\
+				}					\
+			}						\
+			if (_chIdx == CH_HZ_ID_MAP_NUM)	\
+				(_khz) = 2412000;		\
+		} while (0)
 
 #define     MAP_KHZ_TO_CHANNEL_ID(_khz, _ch)                 \
-		do{													\
-			int _chIdx;											\
-			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++)\
-			{													\
-				if ((_khz) == CH_HZ_ID_MAP[_chIdx].freqKHz)			\
-				{												\
-					(_ch) = CH_HZ_ID_MAP[_chIdx].channel;			\
-					break;										\
-				}												\
-			}													\
-			if (_chIdx == CH_HZ_ID_MAP_NUM)					\
-				(_ch) = 1;											\
-		}while(0)
+		do {							\
+			int _chIdx;				\
+			for (_chIdx = 0; _chIdx < CH_HZ_ID_MAP_NUM; _chIdx++) {\
+				if ((_khz) == CH_HZ_ID_MAP[_chIdx].freqKHz) {\
+					(_ch) = CH_HZ_ID_MAP[_chIdx].channel; \
+					break;			\
+				}					\
+			}						\
+			if (_chIdx == CH_HZ_ID_MAP_NUM)			\
+				(_ch) = 1;				\
+		} while (0)
 
 void BuildChannelListEx(struct rt_rtmp_adapter *pAd);
 
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index c16f3763cca..9414aa34437 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd,
 /*
     ==========================================================================
     Description:
-        This is a function to initilize 4-way handshake
+        This is a function to initialize 4-way handshake
 
     Return:
 
@@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd,
     ==========================================================================
     Description:
         When receiving the last packet of 4-way pairwisekey handshake.
-        Initilize 2-way groupkey handshake following.
+        Initialize 2-way groupkey handshake following.
     Return:
     ==========================================================================
 */
diff --git a/drivers/staging/rt2860/common/rtmp_timer.c b/drivers/staging/rt2860/common/rtmp_timer.c
index 42e47d9dc2c..ab520909490 100644
--- a/drivers/staging/rt2860/common/rtmp_timer.c
+++ b/drivers/staging/rt2860/common/rtmp_timer.c
@@ -143,8 +143,8 @@ int RtmpTimerQThread(IN void *Context)
 	struct rt_rtmp_os_task *pTask;
 	struct rt_rtmp_adapter *pAd;
 
-	pTask = (struct rt_rtmp_os_task *)Context;
-	pAd = (struct rt_rtmp_adapter *)pTask->priv;
+	pTask = Context;
+	pAd = pTask->priv;
 
 	RtmpOSTaskCustomize(pTask);
 
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index 99c9362bae8..01414c3b488 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -31,7 +31,7 @@
 
 	Revision History:
 	Who			When			What
-	--------	----------		----------------------------------------------
+	--------	----------		------------------------------
 	John Chang	2003-08-28		Created
 	John Chang  2004-09-06      modified for RT2600
 
@@ -50,7 +50,7 @@
 #define MLME_TASK_EXEC_INTV         100/*200*/	/* */
 #define LEAD_TIME                   5
 #define MLME_TASK_EXEC_MULTIPLE       10  /*5*/	/* MLME_TASK_EXEC_MULTIPLE * MLME_TASK_EXEC_INTV = 1 sec */
-#define REORDER_EXEC_INTV         	100	/* 0.1 sec */
+#define REORDER_EXEC_INTV		100	/* 0.1 sec */
 
 /* The definition of Radar detection duration region */
 #define CE		0
@@ -60,7 +60,7 @@
 #define JAP_W56	4
 #define MAX_RD_REGION 5
 
-#define BEACON_LOST_TIME            4 * OS_HZ	/* 2048 msec = 2 sec */
+#define BEACON_LOST_TIME            (4 * OS_HZ)	/* 2048 msec = 2 sec */
 
 #define DLS_TIMEOUT                 1200	/* unit: msec */
 #define AUTH_TIMEOUT                300	/* unit: msec */
@@ -119,8 +119,8 @@
 #define MAC_ADDR_IS_GROUP(Addr)       (((Addr[0]) & 0x01))
 #define MAC_ADDR_HASH(Addr)            (Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
 #define MAC_ADDR_HASH_INDEX(Addr)      (MAC_ADDR_HASH(Addr) % HASH_TABLE_SIZE)
-#define TID_MAC_HASH(Addr,TID)            (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
-#define TID_MAC_HASH_INDEX(Addr,TID)      (TID_MAC_HASH(Addr,TID) % HASH_TABLE_SIZE)
+#define TID_MAC_HASH(Addr, TID)            (TID^Addr[0] ^ Addr[1] ^ Addr[2] ^ Addr[3] ^ Addr[4] ^ Addr[5])
+#define TID_MAC_HASH_INDEX(Addr, TID)      (TID_MAC_HASH(Addr, TID) % HASH_TABLE_SIZE)
 
 /* LED Control */
 /* assoiation ON. one LED ON. another blinking when TX, OFF when idle */
@@ -145,7 +145,7 @@
 #define CAP_IS_DSSS_OFDM(x)              (((x) & 0x2000) != 0)
 #define CAP_IS_DELAY_BA(x)               (((x) & 0x4000) != 0)	/* 802.11e d9 */
 
-#define CAP_GENERATE(ess,ibss,priv,s_pre,s_slot,spectrum)  (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
+#define CAP_GENERATE(ess, ibss, priv, s_pre, s_slot, spectrum)  (((ess) ? 0x0001 : 0x0000) | ((ibss) ? 0x0002 : 0x0000) | ((priv) ? 0x0010 : 0x0000) | ((s_pre) ? 0x0020 : 0x0000) | ((s_slot) ? 0x0400 : 0x0000) | ((spectrum) ? 0x0100 : 0x0000))
 
 #define ERP_IS_NON_ERP_PRESENT(x)        (((x) & 0x01) != 0)	/* 802.11g */
 #define ERP_IS_USE_PROTECTION(x)         (((x) & 0x02) != 0)	/* 802.11g */
@@ -154,9 +154,9 @@
 #define DRS_TX_QUALITY_WORST_BOUND       8	/* 3  // just test by gary */
 #define DRS_PENALTY                      8
 
-#define BA_NOTUSE 	2
+#define BA_NOTUSE	2
 /*BA Policy subfiled value in ADDBA frame */
-#define IMMED_BA 	1
+#define IMMED_BA	1
 #define DELAY_BA	0
 
 /* BA Initiator subfield in DELBA frame */
@@ -176,8 +176,7 @@
 
 /* reset all OneSecTx counters */
 #define RESET_ONE_SEC_TX_CNT(__pEntry) \
-if (((__pEntry)) != NULL) \
-{ \
+if (((__pEntry)) != NULL) { \
 	(__pEntry)->OneSecTxRetryOkCount = 0; \
 	(__pEntry)->OneSecTxFailCount = 0; \
 	(__pEntry)->OneSecTxNoRetryOkCount = 0; \
@@ -846,7 +845,7 @@ struct rt_mlme_queue {
 	struct rt_mlme_queue_elem Entry[MAX_LEN_OF_MLME_QUEUE];
 };
 
-typedef void(*STATE_MACHINE_FUNC) (void * Adaptor, struct rt_mlme_queue_elem *Elem);
+typedef void(*STATE_MACHINE_FUNC) (void *Adaptor, struct rt_mlme_queue_elem *Elem);
 
 struct rt_state_machine {
 	unsigned long Base;
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index 0029b2d73b7..6536965df3f 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -1015,7 +1015,7 @@ int RtmpOSTaskKill(struct rt_rtmp_os_task *pTask)
 	struct rt_rtmp_adapter *pAd;
 	int ret = NDIS_STATUS_FAILURE;
 
-	pAd = (struct rt_rtmp_adapter *)pTask->priv;
+	pAd = pTask->priv;
 
 #ifdef KTHREAD_SUPPORT
 	if (pTask->kthread_task) {
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index 82b6e783b33..282935caba2 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -2511,7 +2511,7 @@ void RTMPWriteTxWI(struct rt_rtmp_adapter *pAd, struct rt_txwi * pTxWI, IN BOOLE
 		   u8 TID,
 		   u8 TxRate,
 		   u8 Txopmode,
-		   IN BOOLEAN CfAck, IN HTTRANSMIT_SETTING * pTransmit);
+		   IN BOOLEAN CfAck, IN HTTRANSMIT_SETTING *pTransmit);
 
 void RTMPWriteTxWI_Data(struct rt_rtmp_adapter *pAd,
 			struct rt_txwi *pTxWI, struct rt_tx_blk *pTxBlk);
@@ -3059,7 +3059,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(struct rt_rtmp_adapter *pAd,
 				    u16 *pBeaconPeriod,
 				    u8 *pChannel,
 				    u8 *pNewChannel,
-				    OUT LARGE_INTEGER * pTimestamp,
+				    OUT LARGE_INTEGER *pTimestamp,
 				    struct rt_cf_parm *pCfParm,
 				    u16 *pAtimWin,
 				    u16 *pCapabilityInfo,
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index 674769d2b59..a0fe31de0a6 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -64,6 +64,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x14B2, 0x3C07)},	/* AL */
 	{USB_DEVICE(0x050D, 0x8053)},	/* Belkin */
 	{USB_DEVICE(0x050D, 0x825B)},	/* Belkin */
+	{USB_DEVICE(0x050D, 0x935B)},	/* Belkin F6D4050 v2 */
 	{USB_DEVICE(0x14B2, 0x3C23)},	/* Airlink */
 	{USB_DEVICE(0x14B2, 0x3C27)},	/* Airlink */
 	{USB_DEVICE(0x07AA, 0x002F)},	/* Corega */
@@ -422,8 +423,8 @@ int MlmeThread(IN void *Context)
 	int status;
 	status = 0;
 
-	pTask = (struct rt_rtmp_os_task *)Context;
-	pAd = (struct rt_rtmp_adapter *)pTask->priv;
+	pTask = Context;
+	pAd = pTask->priv;
 
 	RtmpOSTaskCustomize(pTask);
 
@@ -491,8 +492,8 @@ int RTUSBCmdThread(IN void *Context)
 	int status;
 	status = 0;
 
-	pTask = (struct rt_rtmp_os_task *)Context;
-	pAd = (struct rt_rtmp_adapter *)pTask->priv;
+	pTask = Context;
+	pAd = pTask->priv;
 
 	RtmpOSTaskCustomize(pTask);
 
diff --git a/drivers/staging/rt3070/md4.h b/drivers/staging/rt3070/md4.h
deleted file mode 100644
index b3fb6372618..00000000000
--- a/drivers/staging/rt3070/md4.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- *************************************************************************
- * Ralink Tech Inc.
- * 5F., No.36, Taiyuan St., Jhubei City,
- * Hsinchu County 302,
- * Taiwan, R.O.C.
- *
- * (c) Copyright 2002-2007, Ralink Technology, Inc.
- *
- * This program is free software; you can redistribute it and/or modify  *
- * it under the terms of the GNU General Public License as published by  *
- * the Free Software Foundation; either version 2 of the License, or     *
- * (at your option) any later version.                                   *
- *                                                                       *
- * This program is distributed in the hope that it will be useful,       *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- * GNU General Public License for more details.                          *
- *                                                                       *
- * You should have received a copy of the GNU General Public License     *
- * along with this program; if not, write to the                         *
- * Free Software Foundation, Inc.,                                       *
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- *                                                                       *
- *************************************************************************
- */
-
-#ifndef __MD4_H__
-#define __MD4_H__
-
-/* MD4 context. */
-typedef	struct	_MD4_CTX_	{
-	unsigned long	state[4];        /* state (ABCD) */
-	unsigned long	count[2];        /* number of bits, modulo 2^64 (lsb first) */
-	u8	buffer[64];      /* input buffer */
-}	MD4_CTX;
-
-void MD4Init(MD4_CTX *);
-void MD4Update(MD4_CTX *, u8 *, UINT);
-void MD4Final(u8 [16], MD4_CTX *);
-
-#endif /*__MD4_H__*/
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 155a78e0740..1b3103fbf29 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -4,6 +4,7 @@ config R8187SE
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select EEPROM_93CX6
+	select CRYPTO
 	default N
 	---help---
 	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index 2ae3745f775..2e64b239e24 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -3,5 +3,6 @@ config RTL8192E
 	depends on PCI && WLAN
 	select WIRELESS_EXT
 	select WEXT_PRIV
+	select CRYPTO
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192e/ieee80211/dot11d.c b/drivers/staging/rtl8192e/ieee80211/dot11d.c
index 908f6051d57..6bbf0919cdf 100644
--- a/drivers/staging/rtl8192e/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192e/ieee80211/dot11d.c
@@ -218,22 +218,4 @@ int ToLegalChannel(
 
 	return default_chn;
 }
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(Dot11d_Init);
-//EXPORT_SYMBOL(Dot11d_Reset);
-//EXPORT_SYMBOL(Dot11d_UpdateCountryIe);
-//EXPORT_SYMBOL(DOT11D_GetMaxTxPwrInDbm);
-//EXPORT_SYMBOL(DOT11D_ScanComplete);
-//EXPORT_SYMBOL(IsLegalChannel);
-//EXPORT_SYMBOL(ToLegalChannel);
-#else
-EXPORT_SYMBOL_NOVERS(Dot11d_Init);
-EXPORT_SYMBOL_NOVERS(Dot11d_Reset);
-EXPORT_SYMBOL_NOVERS(Dot11d_UpdateCountryIe);
-EXPORT_SYMBOL_NOVERS(DOT11D_GetMaxTxPwrInDbm);
-EXPORT_SYMBOL_NOVERS(DOT11D_ScanComplete);
-EXPORT_SYMBOL_NOVERS(IsLegalChannel);
-EXPORT_SYMBOL_NOVERS(ToLegalChannel);
-#endif
-
 #endif
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
index 50728f6e9c5..dda6719234c 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
@@ -27,12 +27,7 @@
 #include <linux/kernel.h>   /* ARRAY_SIZE */
 #include <linux/version.h>
 #include <linux/module.h>
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 #include <linux/jiffies.h>
-#else
-#include <linux/jffs.h>
-#include <linux/tqueue.h>
-#endif
 #include <linux/timer.h>
 #include <linux/sched.h>
 #include <linux/semaphore.h>
@@ -44,12 +39,6 @@
 #include "rtl819x_BA.h"
 #include "rtl819x_TS.h"
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20))
-#ifndef bool
-typedef enum{false = 0, true} bool;
-#endif
-#endif
-
 #ifndef IW_MODE_MONITOR
 #define IW_MODE_MONITOR 6
 #endif
@@ -428,46 +417,9 @@ typedef struct ieee_param {
 #define IW_QUAL_NOISE_UPDATED  0x4
 #endif
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline void tq_init(struct tq_struct * task, void(*func)(void *), void *data)
-{
-	task->routine = func;
-	task->data 	= data;
-	//task->next = NULL;
-	INIT_LIST_HEAD(&task->list);
-	task->sync = 0;
-}
-#endif
-
 // linux under 2.6.9 release may not support it, so modify it for common use
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9))
-//#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-#define MSECS(t)	(HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
-static inline unsigned long msleep_interruptible_rsl(unsigned int msecs)
-{
-         unsigned long timeout = MSECS(msecs) + 1;
-
-         while (timeout) {
-                 set_current_state(TASK_INTERRUPTIBLE);
-                 timeout = schedule_timeout(timeout);
-         }
-         return timeout;
-}
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-static inline void msleep(unsigned int msecs)
-{
-         unsigned long timeout = MSECS(msecs) + 1;
-
-         while (timeout) {
-                 set_current_state(TASK_UNINTERRUPTIBLE);
-                 timeout = schedule_timeout(timeout);
-         }
-}
-#endif
-#else
 #define MSECS(t) msecs_to_jiffies(t)
 #define msleep_interruptible_rsl  msleep_interruptible
-#endif
 
 #define IEEE80211_DATA_LEN		2304
 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
@@ -1747,21 +1699,6 @@ enum ieee80211_state {
 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
                                   IEEE80211_52GHZ_MIN_CHANNEL + 1)
 
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,11))
-extern inline int is_multicast_ether_addr(const u8 *addr)
-{
-        return ((addr[0] != 0xff) && (0x01 & addr[0]));
-}
-#endif
-
-#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13))
-extern inline int is_broadcast_ether_addr(const u8 *addr)
-{
-	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
-		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-}
-#endif
-
 typedef struct tx_pending_t{
 	int frag;
 	struct ieee80211_txb *txb;
@@ -1838,11 +1775,7 @@ typedef struct _RT_POWER_SAVE_CONTROL
 	bool				bIPSModeBackup;
 	bool				bSwRfProcessing;
 	RT_RF_POWER_STATE	eInactivePowerState;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	struct work_struct 	InactivePsWorkItem;
-#else
-	struct tq_struct	InactivePsWorkItem;
-#endif
 	struct timer_list	InactivePsTimer;
 
 	// Return point for join action
@@ -2329,36 +2262,16 @@ struct ieee80211_device {
 
 	/* used if IEEE_SOFTMAC_BEACONS is set */
 	struct timer_list beacon_timer;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
         struct work_struct associate_complete_wq;
         struct work_struct associate_procedure_wq;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
         struct delayed_work softmac_scan_wq;
         struct delayed_work associate_retry_wq;
 	 struct delayed_work start_ibss_wq;
 	 struct delayed_work hw_wakeup_wq;
 	struct delayed_work hw_sleep_wq;
-#else
-        struct work_struct softmac_scan_wq;
-        struct work_struct associate_retry_wq;
-	struct work_struct start_ibss_wq;
-	struct work_struct hw_wakeup_wq;
-	struct work_struct hw_sleep_wq;
-#endif
+
         struct work_struct wx_sync_scan_wq;
         struct workqueue_struct *wq;
-#else
-	/* used for periodly scan */
-	struct timer_list scan_timer;
-
-	struct tq_struct associate_complete_wq;
-	struct tq_struct associate_retry_wq;
-	struct tq_struct start_ibss_wq;
-	struct tq_struct associate_procedure_wq;
-	struct tq_struct softmac_scan_wq;
-	struct tq_struct wx_sync_scan_wq;
-
-#endif
         // Qos related. Added by Annie, 2005-11-01.
         //STA_QOS  StaQos;
 
@@ -2557,11 +2470,7 @@ struct ieee80211_device {
 
 static inline void *ieee80211_priv(struct net_device *dev)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-#else
-	return ((struct ieee80211_device *)dev->priv)->priv;
-#endif
 }
 
 extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
@@ -2814,11 +2723,7 @@ extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_reques
 			     union iwreq_data *wrqu, char *b);
 
 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-#else
- extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
-#endif
 
 
 extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c
index d5aa9af3d9f..ae503791890 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c
@@ -243,23 +243,3 @@ void ieee80211_crypto_deinit(void)
 	kfree(hcrypt);
 }
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_crypt_deinit_entries);
-//EXPORT_SYMBOL(ieee80211_crypt_deinit_handler);
-//EXPORT_SYMBOL(ieee80211_crypt_delayed_deinit);
-
-//EXPORT_SYMBOL(ieee80211_register_crypto_ops);
-//EXPORT_SYMBOL(ieee80211_unregister_crypto_ops);
-//EXPORT_SYMBOL(ieee80211_get_crypto_ops);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_crypt_deinit_entries);
-EXPORT_SYMBOL_NOVERS(ieee80211_crypt_deinit_handler);
-EXPORT_SYMBOL_NOVERS(ieee80211_crypt_delayed_deinit);
-
-EXPORT_SYMBOL_NOVERS(ieee80211_register_crypto_ops);
-EXPORT_SYMBOL_NOVERS(ieee80211_unregister_crypto_ops);
-EXPORT_SYMBOL_NOVERS(ieee80211_get_crypto_ops);
-#endif
-
-//module_init(ieee80211_crypto_init);
-//module_exit(ieee80211_crypto_deinit);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.h
index a84df4b7648..ca7dd0dda82 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.h
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.h
@@ -82,12 +82,4 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
 void ieee80211_crypt_deinit_handler(unsigned long);
 void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
 				    struct ieee80211_crypt_data **crypt);
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
-#endif
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,31))
-#define crypto_alloc_tfm crypto_alloc_tfm_rsl
-#define crypto_free_tfm crypto_free_tfm_rsl
-#endif
-
 #endif
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_ccmp.c
index 7165c4c75c7..a4e21cbcdf1 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_ccmp.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_ccmp.c
@@ -24,18 +24,9 @@
 
 #include "ieee80211.h"
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#include "rtl_crypto.h"
-#else
 #include <linux/crypto.h>
-#endif
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-    #include <asm/scatterlist.h>
-#else
     #include <linux/scatterlist.h>
-#endif
-//#include <asm/scatterlist.h>
 
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Host AP crypt: CCMP");
@@ -75,21 +66,7 @@ struct ieee80211_ccmp_data {
 void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm,
 			     const u8 pt[16], u8 ct[16])
 {
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	struct scatterlist src, dst;
-
-	src.page = virt_to_page(pt);
-	src.offset = offset_in_page(pt);
-	src.length = AES_BLOCK_LEN;
-
-	dst.page = virt_to_page(ct);
-	dst.offset = offset_in_page(ct);
-	dst.length = AES_BLOCK_LEN;
-
-	crypto_cipher_encrypt(tfm, &dst, &src, AES_BLOCK_LEN);
-#else
 	crypto_cipher_encrypt_one((void*)tfm, ct, pt);
-#endif
 }
 
 static void * ieee80211_ccmp_init(int key_idx)
@@ -101,14 +78,6 @@ static void * ieee80211_ccmp_init(int key_idx)
 		goto fail;
 	priv->key_idx = key_idx;
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	priv->tfm = crypto_alloc_tfm("aes", 0);
-	if (priv->tfm == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
-		       "crypto API aes\n");
-		goto fail;
-	}
-       #else
        priv->tfm = (void*)crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->tfm)) {
 		printk(KERN_DEBUG "ieee80211_crypt_ccmp: could not allocate "
@@ -116,17 +85,12 @@ static void * ieee80211_ccmp_init(int key_idx)
 		priv->tfm = NULL;
 		goto fail;
 	}
-	#endif
 	return priv;
 
 fail:
 	if (priv) {
 		if (priv->tfm)
-			#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
-			crypto_free_tfm(priv->tfm);
-                    #else
 			crypto_free_cipher((void*)priv->tfm);
-		      #endif
 		kfree(priv);
 	}
 
@@ -138,11 +102,7 @@ static void ieee80211_ccmp_deinit(void *priv)
 {
 	struct ieee80211_ccmp_data *_priv = priv;
 	if (_priv && _priv->tfm)
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21))
-		crypto_free_tfm(_priv->tfm);
-#else
 		crypto_free_cipher((void*)_priv->tfm);
-#endif
 	kfree(priv);
 }
 
@@ -528,11 +488,3 @@ void ieee80211_crypto_ccmp_exit(void)
 	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
 }
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_ccmp_null);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_ccmp_null);
-#endif
-
-//module_init(ieee80211_crypto_ccmp_init);
-//module_exit(ieee80211_crypto_ccmp_exit);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_tkip.c
index 65f48896bfa..14ca61087c0 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_tkip.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_tkip.c
@@ -24,17 +24,8 @@
 #include "ieee80211.h"
 
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#include "rtl_crypto.h"
-#else
 #include <linux/crypto.h>
-#endif
-//#include <asm/scatterlist.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-    #include <asm/scatterlist.h>
-#else
-        #include <linux/scatterlist.h>
-#endif
+#include <linux/scatterlist.h>
 
 #include <linux/crc32.h>
 
@@ -68,17 +59,10 @@ struct ieee80211_tkip_data {
 	u32 dot11RSNAStatsTKIPLocalMICFailures;
 
 	int key_idx;
-#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
 	struct crypto_blkcipher *rx_tfm_arc4;
 	struct crypto_hash *rx_tfm_michael;
 	struct crypto_blkcipher *tx_tfm_arc4;
 	struct crypto_hash *tx_tfm_michael;
-#else
-	struct crypto_tfm *tx_tfm_arc4;
-	struct crypto_tfm *tx_tfm_michael;
-	struct crypto_tfm *rx_tfm_arc4;
-	struct crypto_tfm *rx_tfm_michael;
-#endif
 	/* scratch buffers for virt_to_page() (crypto API) */
 	u8 rx_hdr[16], tx_hdr[16];
 };
@@ -91,35 +75,6 @@ static void * ieee80211_tkip_init(int key_idx)
 	if (priv == NULL)
 		goto fail;
 	priv->key_idx = key_idx;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	priv->tx_tfm_arc4 = crypto_alloc_tfm("arc4", 0);
-	if (priv->tx_tfm_arc4 == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-				"crypto API arc4\n");
-		goto fail;
-	}
-
-	priv->tx_tfm_michael = crypto_alloc_tfm("michael_mic", 0);
-	if (priv->tx_tfm_michael == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-				"crypto API michael_mic\n");
-		goto fail;
-	}
-
-	priv->rx_tfm_arc4 = crypto_alloc_tfm("arc4", 0);
-	if (priv->rx_tfm_arc4 == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-				"crypto API arc4\n");
-		goto fail;
-	}
-
-	priv->rx_tfm_michael = crypto_alloc_tfm("michael_mic", 0);
-	if (priv->rx_tfm_michael == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-				"crypto API michael_mic\n");
-		goto fail;
-	}
-#else
 	priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
 			CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->tx_tfm_arc4)) {
@@ -155,22 +110,10 @@ static void * ieee80211_tkip_init(int key_idx)
 		priv->rx_tfm_michael = NULL;
 		goto fail;
 	}
-#endif
 	return priv;
 
 fail:
 	if (priv) {
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		if (priv->tx_tfm_michael)
-			crypto_free_tfm(priv->tx_tfm_michael);
-		if (priv->tx_tfm_arc4)
-			crypto_free_tfm(priv->tx_tfm_arc4);
-		if (priv->rx_tfm_michael)
-			crypto_free_tfm(priv->rx_tfm_michael);
-		if (priv->rx_tfm_arc4)
-			crypto_free_tfm(priv->rx_tfm_arc4);
-
-#else
 		if (priv->tx_tfm_michael)
 			crypto_free_hash(priv->tx_tfm_michael);
 		if (priv->tx_tfm_arc4)
@@ -179,7 +122,6 @@ fail:
 			crypto_free_hash(priv->rx_tfm_michael);
 		if (priv->rx_tfm_arc4)
 			crypto_free_blkcipher(priv->rx_tfm_arc4);
-#endif
 		kfree(priv);
 	}
 
@@ -190,16 +132,6 @@ fail:
 static void ieee80211_tkip_deinit(void *priv)
 {
 	struct ieee80211_tkip_data *_priv = priv;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	if (_priv->tx_tfm_michael)
-		crypto_free_tfm(_priv->tx_tfm_michael);
-	if (_priv->tx_tfm_arc4)
-		crypto_free_tfm(_priv->tx_tfm_arc4);
-	if (_priv->rx_tfm_michael)
-		crypto_free_tfm(_priv->rx_tfm_michael);
-	if (_priv->rx_tfm_arc4)
-		crypto_free_tfm(_priv->rx_tfm_arc4);
-#else
 	if (_priv) {
 		if (_priv->tx_tfm_michael)
 			crypto_free_hash(_priv->tx_tfm_michael);
@@ -210,7 +142,6 @@ static void ieee80211_tkip_deinit(void *priv)
 		if (_priv->rx_tfm_arc4)
 			crypto_free_blkcipher(_priv->rx_tfm_arc4);
 	}
-#endif
 	kfree(priv);
 }
 
@@ -381,10 +312,8 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	struct ieee80211_hdr_4addr *hdr;
 	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 
-	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
 	struct blkcipher_desc desc = {.tfm = tkey->tx_tfm_arc4};
 	int ret = 0;
-	#endif
 	u8 rc4key[16],  *icv;
 	u32 crc;
 	struct scatterlist sg;
@@ -447,32 +376,14 @@ printk("%x\n", ((u32*)tkey->key)[7]);
 	if (!tcb_desc->bHwSec)
 	{
 		icv = skb_put(skb, 4);
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 		crc = ~crc32_le(~0, pos, len);
-#else
-		crc = ~ether_crc_le(len, pos);
-#endif
 		icv[0] = crc;
 		icv[1] = crc >> 8;
 		icv[2] = crc >> 16;
 		icv[3] = crc >> 24;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		crypto_cipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = len + 4;
-		crypto_cipher_encrypt(tkey->tx_tfm_arc4, &sg, &sg, len + 4);
-#else
 		crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = len + 4;
-#else
 		sg_init_one(&sg, pos, len+4);
-#endif
 		ret= crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-#endif
 
 	}
 
@@ -483,11 +394,7 @@ printk("%x\n", ((u32*)tkey->key)[7]);
 	}
 
 	if (!tcb_desc->bHwSec)
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		return 0;
-	#else
 		return ret;
-	#endif
 	else
         	return 0;
 
@@ -502,9 +409,7 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	u16 iv16;
 	struct ieee80211_hdr_4addr *hdr;
 	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
-	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
 	struct blkcipher_desc desc = {.tfm = tkey->rx_tfm_arc4};
-	#endif
 	u8 rc4key[16];
 	u8 icv[4];
 	u32 crc;
@@ -563,21 +468,8 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 
 		plen = skb->len - hdr_len - 12;
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		crypto_cipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = plen + 4;
-		crypto_cipher_decrypt(tkey->rx_tfm_arc4, &sg, &sg, plen + 4);
-#else
 		crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = plen + 4;
-#else
 		sg_init_one(&sg, pos, plen+4);
-#endif
 		if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG ": TKIP: failed to decrypt "
@@ -586,13 +478,8 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 			}
 			return -7;
 		}
-#endif
 
-	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 		crc = ~crc32_le(~0, pos, plen);
-	#else
-		crc = ~ether_crc_le(plen, pos);
-	#endif
 		icv[0] = crc;
 		icv[1] = crc >> 8;
 		icv[2] = crc >> 16;
@@ -641,47 +528,6 @@ if( ((u16*)skb->data)[0] & 0x4000){
 }
 
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-static int michael_mic(struct crypto_tfm * tfm_michael, u8 *key, u8 *hdr,
-		       u8 *data, size_t data_len, u8 *mic)
-{
-	struct scatterlist sg[2];
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-        struct hash_desc desc;
-        int ret = 0;
-#endif
-
-	if (tfm_michael == NULL){
-		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
-		return -1;
-	}
-	sg[0].page = virt_to_page(hdr);
-	sg[0].offset = offset_in_page(hdr);
-	sg[0].length = 16;
-
-	sg[1].page = virt_to_page(data);
-	sg[1].offset = offset_in_page(data);
-	sg[1].length = data_len;
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-	crypto_digest_init(tfm_michael);
-        crypto_digest_setkey(tfm_michael, key, 8);
-        crypto_digest_update(tfm_michael, sg, 2);
-        crypto_digest_final(tfm_michael, mic);
-        return 0;
-#else
-if (crypto_hash_setkey(tkey->tfm_michael, key, 8))
-                return -1;
-
-//      return 0;
-              desc.tfm = tkey->tfm_michael;
-              desc.flags = 0;
-              ret = crypto_hash_digest(&desc, sg, data_len + 16, mic);
-              return ret;
-#endif
-}
-#else
 static int michael_mic(struct crypto_hash *tfm_michael, u8 * key, u8 * hdr,
                        u8 * data, size_t data_len, u8 * mic)
 {
@@ -692,19 +538,9 @@ static int michael_mic(struct crypto_hash *tfm_michael, u8 * key, u8 * hdr,
                 printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
                 return -1;
         }
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)
-        sg[0].page = virt_to_page(hdr);
-        sg[0].offset = offset_in_page(hdr);
-        sg[0].length = 16;
-
-        sg[1].page = virt_to_page(data);
-        sg[1].offset = offset_in_page(data);
-        sg[1].length = data_len;
-#else
         sg_init_table(sg, 2);
         sg_set_buf(&sg[0], hdr, 16);
         sg_set_buf(&sg[1], data, data_len);
-#endif
 
         if (crypto_hash_setkey(tfm_michael, key, 8))
                 return -1;
@@ -713,7 +549,6 @@ static int michael_mic(struct crypto_hash *tfm_michael, u8 * key, u8 * hdr,
         desc.flags = 0;
         return crypto_hash_digest(&desc, sg, data_len + 16, mic);
 }
-#endif
 
 
 
@@ -772,13 +607,8 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *pri
 	}
 	// }
 	pos = skb_put(skb, 8);
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
-				skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
-#else
 	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
 				skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
-#endif
 		return -1;
 
 	return 0;
@@ -850,13 +680,8 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
 	}
 	// }
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
-				skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
-#else
 	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
 				skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
-#endif
             	return -1;
 	if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
 		struct ieee80211_hdr_4addr *hdr;
@@ -886,32 +711,18 @@ static int ieee80211_tkip_set_key(void *key, int len, u8 *seq, void *priv)
 {
 	struct ieee80211_tkip_data *tkey = priv;
 	int keyidx;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	struct crypto_tfm *tfm = tkey->tx_tfm_michael;
-	struct crypto_tfm *tfm2 = tkey->tx_tfm_arc4;
-	struct crypto_tfm *tfm3 = tkey->rx_tfm_michael;
-	struct crypto_tfm *tfm4 = tkey->rx_tfm_arc4;
-#else
 	struct crypto_hash *tfm = tkey->tx_tfm_michael;
 	struct crypto_blkcipher *tfm2 = tkey->tx_tfm_arc4;
 	struct crypto_hash *tfm3 = tkey->rx_tfm_michael;
 	struct crypto_blkcipher *tfm4 = tkey->rx_tfm_arc4;
-#endif
 
 	keyidx = tkey->key_idx;
 	memset(tkey, 0, sizeof(*tkey));
 	tkey->key_idx = keyidx;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
 	tkey->tx_tfm_michael = tfm;
 	tkey->tx_tfm_arc4 = tfm2;
 	tkey->rx_tfm_michael = tfm3;
 	tkey->rx_tfm_arc4 = tfm4;
-#else
-	tkey->tx_tfm_michael = tfm;
-	tkey->tx_tfm_arc4 = tfm2;
-	tkey->rx_tfm_michael = tfm3;
-	tkey->rx_tfm_arc4 = tfm4;
-#endif
 
 	if (len == TKIP_KEY_LEN) {
 		memcpy(tkey->key, key, TKIP_KEY_LEN);
@@ -1021,11 +832,4 @@ void ieee80211_tkip_null(void)
 //    printk("============>%s()\n", __FUNCTION__);
         return;
 }
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_tkip_null);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_tkip_null);
-#endif
 
-//module_init(ieee80211_crypto_tkip_init);
-//module_exit(ieee80211_crypto_tkip_exit);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_wep.c
index c4bbc8ddbad..5dc976498aa 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt_wep.c
@@ -21,30 +21,11 @@
 #include "ieee80211.h"
 
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#include "rtl_crypto.h"
-#else
 #include <linux/crypto.h>
-#endif
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-    #include <asm/scatterlist.h>
-#else
-    #include <linux/scatterlist.h>
-#endif
-//#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
 #include <linux/crc32.h>
-//
-/*
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-#include "rtl_crypto.h"
-#else
-#include <linux/crypto.h>
-#endif
 
-#include <asm/scatterlist.h>
-#include <linux/crc32.h>
-*/
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Host AP crypt: WEP");
 MODULE_LICENSE("GPL");
@@ -58,12 +39,8 @@ struct prism2_wep_data {
 	u8 key[WEP_KEY_LEN + 1];
 	u8 key_len;
 	u8 key_idx;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	struct crypto_tfm *tfm;
-	#else
         struct crypto_blkcipher *tx_tfm;
         struct crypto_blkcipher *rx_tfm;
-        #endif
 };
 
 
@@ -76,14 +53,6 @@ static void * prism2_wep_init(int keyidx)
 		goto fail;
 	priv->key_idx = keyidx;
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	priv->tfm = crypto_alloc_tfm("arc4", 0);
-	if (priv->tfm == NULL) {
-		printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
-		       "crypto API arc4\n");
-		goto fail;
-	}
-	#else
 	priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
         if (IS_ERR(priv->tx_tfm)) {
                 printk(KERN_DEBUG "ieee80211_crypt_wep: could not allocate "
@@ -98,7 +67,6 @@ static void * prism2_wep_init(int keyidx)
                 priv->rx_tfm = NULL;
                 goto fail;
         }
-        #endif
 
 	/* start WEP IV from a random value */
 	get_random_bytes(&priv->iv, 4);
@@ -106,13 +74,6 @@ static void * prism2_wep_init(int keyidx)
 	return priv;
 
 fail:
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	if (priv) {
-		if (priv->tfm)
-			crypto_free_tfm(priv->tfm);
-		kfree(priv);
-	}
-	#else
 	if (priv) {
                 if (priv->tx_tfm)
                         crypto_free_blkcipher(priv->tx_tfm);
@@ -120,7 +81,6 @@ fail:
                         crypto_free_blkcipher(priv->rx_tfm);
                 kfree(priv);
         }
-        #endif
 	return NULL;
 }
 
@@ -128,17 +88,12 @@ fail:
 static void prism2_wep_deinit(void *priv)
 {
 	struct prism2_wep_data *_priv = priv;
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-	if (_priv && _priv->tfm)
-		crypto_free_tfm(_priv->tfm);
-	#else
 	if (_priv) {
                 if (_priv->tx_tfm)
                         crypto_free_blkcipher(_priv->tx_tfm);
                 if (_priv->rx_tfm)
                         crypto_free_blkcipher(_priv->rx_tfm);
         }
-        #endif
 	kfree(priv);
 }
 
@@ -155,9 +110,7 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	u8 key[WEP_KEY_LEN + 3];
 	u8 *pos;
 	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
-	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
 	struct blkcipher_desc desc = {.tfm = wep->tx_tfm};
-	#endif
 	u32 crc;
 	u8 *icv;
 	struct scatterlist sg;
@@ -196,35 +149,16 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	{
 
 		/* Append little-endian CRC32 and encrypt it to produce ICV */
-	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 		crc = ~crc32_le(~0, pos, len);
-	#else
-		crc = ~ether_crc_le(len, pos);
-	#endif
 		icv = skb_put(skb, 4);
 		icv[0] = crc;
 		icv[1] = crc >> 8;
 		icv[2] = crc >> 16;
 		icv[3] = crc >> 24;
 
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		crypto_cipher_setkey(wep->tfm, key, klen);
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = len + 4;
-		crypto_cipher_encrypt(wep->tfm, &sg, &sg, len + 4);
-		return 0;
-	#else
 		crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
-	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = len + 4;
-	#else
 		sg_init_one(&sg, pos, len+4);
-	#endif
 		return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-	#endif
 	}
 
 	return 0;
@@ -245,9 +179,7 @@ static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	u8 key[WEP_KEY_LEN + 3];
 	u8 keyidx, *pos;
 	cb_desc *tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
-	#if((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) || (OPENSUSE_SLED))
 	struct blkcipher_desc desc = {.tfm = wep->rx_tfm};
-	#endif
 	u32 crc;
 	u8 icv[4];
 	struct scatterlist sg;
@@ -272,29 +204,11 @@ static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 
 	if (!tcb_desc->bHwSec)
 	{
-#if((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21)) && (!OPENSUSE_SLED))
-		crypto_cipher_setkey(wep->tfm, key, klen);
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = plen + 4;
-		crypto_cipher_decrypt(wep->tfm, &sg, &sg, plen + 4);
-	#else
 		crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
-	#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		sg.page = virt_to_page(pos);
-		sg.offset = offset_in_page(pos);
-		sg.length = plen + 4;
-	#else
 		sg_init_one(&sg, pos, plen+4);
-	#endif
 		if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
 			return -7;
-	#endif
-	#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 		crc = ~crc32_le(~0, pos, plen);
-	#else
-		crc = ~ether_crc_le(plen, pos);
-	#endif
 		icv[0] = crc;
 		icv[1] = crc >> 8;
 		icv[2] = crc >> 16;
@@ -379,14 +293,6 @@ void __exit ieee80211_crypto_wep_exit(void)
 
 void ieee80211_wep_null(void)
 {
-//	printk("============>%s()\n", __FUNCTION__);
         return;
 }
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_wep_null);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_wep_null);
-#endif
 
-//module_init(ieee80211_crypto_wep_init);
-//module_exit(ieee80211_crypto_wep_exit);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c
index 614a8b630e6..7edf5c897a6 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c
@@ -31,7 +31,6 @@
 *******************************************************************************/
 
 #include <linux/compiler.h>
-//#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/if_arp.h>
 #include <linux/in6.h>
@@ -110,14 +109,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 		goto failed;
 	}
 
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 	ieee = netdev_priv(dev);
-#else
-	ieee = (struct ieee80211_device *)dev->priv;
-#endif
-#if 0
-	dev->hard_start_xmit = ieee80211_rtl_xmit;
-#endif
 
 	memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
 	ieee->dev = dev;
@@ -166,12 +158,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 
 	ieee80211_softmac_init(ieee);
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13))
 	ieee->pHTInfo = kzalloc(sizeof(RT_HIGH_THROUGHPUT), GFP_KERNEL);
-#else
-	ieee->pHTInfo = (RT_HIGH_THROUGHPUT*)kmalloc(sizeof(RT_HIGH_THROUGHPUT), GFP_KERNEL);
-	memset(ieee->pHTInfo,0,sizeof(RT_HIGH_THROUGHPUT));
-#endif
 	if (ieee->pHTInfo == NULL)
 	{
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc memory for HTInfo\n");
@@ -180,13 +167,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 	HTUpdateDefaultSetting(ieee);
 	HTInitializeHTInfo(ieee); //may move to other place.
 	TSInitialize(ieee);
-#if 0
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
- 	INIT_WORK(&ieee->ht_onAssRsp, (void(*)(void*)) HTOnAssocRsp_wq);
-#else
-	INIT_WORK(&ieee->ht_onAssRsp, (void(*)(void*)) HTOnAssocRsp_wq, ieee);
-#endif
-#endif
 	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++)
 		INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
 
@@ -205,32 +185,20 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 
  failed:
 	if (dev)
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 		free_netdev(dev);
-#else
-		kfree(dev);
-#endif
 	return NULL;
 }
 
 
 void free_ieee80211(struct net_device *dev)
 {
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 	struct ieee80211_device *ieee = netdev_priv(dev);
-#else
-	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
-#endif
 	int i;
-	//struct list_head *p, *q;
-//	del_timer_sync(&ieee->SwBwTimer);
-#if 1
 	if (ieee->pHTInfo != NULL)
 	{
 		kfree(ieee->pHTInfo);
 		ieee->pHTInfo = NULL;
 	}
-#endif
 	RemoveAllTS(ieee);
 	ieee80211_softmac_free(ieee);
 	del_timer_sync(&ieee->crypt_deinit_timer);
@@ -247,20 +215,7 @@ void free_ieee80211(struct net_device *dev)
 	}
 
 	ieee80211_networks_free(ieee);
-#if 0
-	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++) {
-		list_for_each_safe(p, q, &ieee->ibss_mac_hash[i]) {
-			kfree(list_entry(p, struct ieee_ibss_seq, list));
-			list_del(p);
-		}
-	}
-
-#endif
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 	free_netdev(dev);
-#else
-	kfree(dev);
-#endif
 }
 
 #ifdef CONFIG_IEEE80211_DEBUG
@@ -358,11 +313,7 @@ int __init ieee80211_rtl_init(void)
 	}
 
 	ieee80211_debug_level = debug;
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-	ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, proc_net);
-#else
 	ieee80211_proc = create_proc_entry(DRV_NAME, S_IFDIR, init_net.proc_net);
-#endif
 	if (ieee80211_proc == NULL) {
 		IEEE80211_ERROR("Unable to create " DRV_NAME
 				" proc directory\n");
@@ -371,11 +322,7 @@ int __init ieee80211_rtl_init(void)
 	e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
 			      ieee80211_proc);
 	if (!e) {
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		remove_proc_entry(DRV_NAME, proc_net);
-#else
 		remove_proc_entry(DRV_NAME, init_net.proc_net);
-#endif
 		ieee80211_proc = NULL;
 		return -EIO;
 	}
@@ -390,11 +337,7 @@ void __exit ieee80211_rtl_exit(void)
 {
 	if (ieee80211_proc) {
 		remove_proc_entry("debug_level", ieee80211_proc);
-#if(LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24))
-		remove_proc_entry(DRV_NAME, proc_net);
-#else
 		remove_proc_entry(DRV_NAME, init_net.proc_net);
-#endif
 		ieee80211_proc = NULL;
 	}
 	ieee80211_crypto_wep_exit();
@@ -403,21 +346,10 @@ void __exit ieee80211_rtl_exit(void)
 	ieee80211_crypto_deinit();
 }
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
 #include <linux/moduleparam.h>
 module_param(debug, int, 0444);
 MODULE_PARM_DESC(debug, "debug output mask");
 
 
-//module_exit(ieee80211_rtl_exit);
-//module_init(ieee80211_rtl_init);
-#endif
 #endif
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(alloc_ieee80211);
-//EXPORT_SYMBOL(free_ieee80211);
-#else
-EXPORT_SYMBOL_NOVERS(alloc_ieee80211);
-EXPORT_SYMBOL_NOVERS(free_ieee80211);
-#endif
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
index da10067485e..aaf9b9dc45e 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
@@ -55,11 +55,7 @@ static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
 	u16 fc = le16_to_cpu(hdr->frame_ctl);
 
 	skb->dev = ieee->dev;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22)
         skb_reset_mac_header(skb);
-#else
-        skb->mac.raw = skb->data;
-#endif
 
 	skb_pull(skb, ieee80211_get_hdrlen(fc));
 	skb->pkt_type = PACKET_OTHERHOST;
@@ -2793,8 +2789,6 @@ static inline void ieee80211_process_probe_response(
 #endif
 		memcpy(target, &network, sizeof(*target));
 		list_add_tail(&target->list, &ieee->network_list);
-		if(ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE)
-			ieee80211_softmac_new_net(ieee,&network);
 	} else {
 		IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
 				     escape_essid(target->ssid,
@@ -2821,8 +2815,6 @@ static inline void ieee80211_process_probe_response(
 		//YJ,add,080819,for hidden ap,end
 
 		update_network(target, &network);
-		if(renew && (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE))
-			ieee80211_softmac_new_net(ieee,&network);
 	}
 
 	spin_unlock_irqrestore(&ieee->lock, flags);
@@ -2880,11 +2872,3 @@ void ieee80211_rx_mgt(struct ieee80211_device *ieee,
 
 	}
 }
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_rx_mgt);
-//EXPORT_SYMBOL(ieee80211_rx);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_rx_mgt);
-EXPORT_SYMBOL_NOVERS(ieee80211_rx);
-#endif
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
index 46b6e8c900e..b7ec1ddee70 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
@@ -510,34 +510,11 @@ out:
 }
 }
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/* called both by wq with ieee->lock held */
-void ieee80211_softmac_scan(struct ieee80211_device *ieee)
-{
-#if 0
-	short watchdog = 0;
-	do{
-		ieee->current_network.channel =
-			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
-		if (watchdog++ > MAX_CHANNEL_NUMBER)
-				return; /* no good chans */
 
-	}while(!ieee->channel_map[ieee->current_network.channel]);
-#endif
-
-	schedule_task(&ieee->softmac_scan_wq);
-}
-#endif
-
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 void ieee80211_softmac_scan_wq(struct work_struct *work)
 {
         struct delayed_work *dwork = container_of(work, struct delayed_work, work);
         struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
-#else
-void ieee80211_softmac_scan_wq(struct ieee80211_device *ieee)
-{
-#endif
 	static short watchdog = 0;
 	u8 last_channel = ieee->current_network.channel;
 #ifdef ENABLE_DOT11D
@@ -575,13 +552,7 @@ void ieee80211_softmac_scan_wq(struct ieee80211_device *ieee)
 	ieee80211_send_probe_requests(ieee);
 
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
-#else
-	//ieee->scan_timer.expires = jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME);
-	if (ieee->scanning == 1)
-		mod_timer(&ieee->scan_timer,(jiffies + MSECS(IEEE80211_SOFTMAC_SCAN_TIME)));
-#endif
 
 	up(&ieee->scan_sem);
 	return;
@@ -597,19 +568,6 @@ out:
 	up(&ieee->scan_sem);
 }
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-void ieee80211_softmac_scan_cb(unsigned long _dev)
-{
-	unsigned long flags;
-	struct ieee80211_device *ieee = (struct ieee80211_device *)_dev;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	ieee80211_softmac_scan(ieee);
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-#endif
-
-
 void ieee80211_beacons_start(struct ieee80211_device *ieee)
 {
 	unsigned long flags;
@@ -665,11 +623,7 @@ void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
 	if (ieee->scanning == 1){
 		ieee->scanning = 0;
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 		cancel_delayed_work(&ieee->softmac_scan_wq);
-#else
-		del_timer_sync(&ieee->scan_timer);
-#endif
 	}
 
 //	spin_unlock_irqrestore(&ieee->lock, flags);
@@ -704,16 +658,7 @@ void ieee80211_rtl_start_scan(struct ieee80211_device *ieee)
 	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN){
 		if (ieee->scanning == 0){
 			ieee->scanning = 1;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
 			queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, 0);
-#else
-
-			queue_work(ieee->wq, &ieee->softmac_scan_wq);
-#endif
-#else
-			ieee80211_softmac_scan(ieee);
-#endif
 		}
 	}else
 		ieee->start_scan(ieee->dev);
@@ -1428,13 +1373,8 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
 
 	ieee->state = IEEE80211_ASSOCIATING_RETRY;
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	queue_delayed_work(ieee->wq, &ieee->associate_retry_wq, \
                            IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
-#else
-	schedule_task(&ieee->associate_retry_wq);
-#endif
-
 	spin_unlock_irqrestore(&ieee->lock, flags);
 }
 
@@ -1527,14 +1467,9 @@ void ieee80211_associate_step2(struct ieee80211_device *ieee)
 		//dev_kfree_skb_any(skb);//edit by thomas
 	}
 }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 void ieee80211_associate_complete_wq(struct work_struct *work)
 {
         struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
-#else
-void ieee80211_associate_complete_wq(struct ieee80211_device *ieee)
-{
-#endif
 	printk(KERN_INFO "Associated successfully\n");
 	ieee->is_roaming = false;
 	if(ieee80211_is_54g(ieee->current_network) &&
@@ -1606,21 +1541,12 @@ void ieee80211_associate_complete(struct ieee80211_device *ieee)
 	}
 #endif
 	//ieee->UpdateHalRATRTableHandler(dev, ieee->dot11HTOperationalRateSet);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	queue_work(ieee->wq, &ieee->associate_complete_wq);
-#else
-	schedule_task(&ieee->associate_complete_wq);
-#endif
 }
 
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 void ieee80211_associate_procedure_wq(struct work_struct *work)
 {
         struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_procedure_wq);
-#else
-void ieee80211_associate_procedure_wq(struct ieee80211_device *ieee)
-{
-#endif
 	ieee->sync_scan_hurryup = 1;
 #ifdef ENABLE_IPS
 	if(ieee->ieee80211_ips_leave != NULL)
@@ -1734,11 +1660,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 					}
 
 					ieee->state = IEEE80211_ASSOCIATING;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 					queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
-					schedule_task(&ieee->associate_procedure_wq);
-#endif
 				}else{
 					if(ieee80211_is_54g(ieee->current_network) &&
 						(ieee->modulation & IEEE80211_OFDM_MODULATION)){
@@ -2332,11 +2254,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 						"Association response status code 0x%x\n",
 						errcode);
 					if(ieee->AsocRetryCount < RT_ASOC_RETRY_LIMIT) {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 						queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
-						schedule_task(&ieee->associate_procedure_wq);
-#endif
 					} else {
 						ieee80211_associate_abort(ieee);
 					}
@@ -2446,11 +2364,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 			//	notify_wx_assoc_event(ieee);
 				//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 				RemovePeerTS(ieee, header->addr2);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 				queue_work(ieee->wq, &ieee->associate_procedure_wq);
-#else
-				schedule_task(&ieee->associate_procedure_wq);
-#endif
 			}
 			break;
 		case IEEE80211_STYPE_MANAGE_ACT:
@@ -2687,16 +2601,11 @@ void ieee80211_start_monitor_mode(struct ieee80211_device *ieee)
 		netif_carrier_on(ieee->dev);
 	}
 }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 void ieee80211_start_ibss_wq(struct work_struct *work)
 {
 
         struct delayed_work *dwork = container_of(work, struct delayed_work, work);
         struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
-#else
-void ieee80211_start_ibss_wq(struct ieee80211_device *ieee)
-{
-#endif
 	/* iwconfig mode ad-hoc will schedule this and return
 	 * on the other hand this will block further iwconfig SET
 	 * operations because of the wx_sem hold.
@@ -2807,11 +2716,7 @@ void ieee80211_start_ibss_wq(struct ieee80211_device *ieee)
 
 inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	queue_delayed_work(ieee->wq, &ieee->start_ibss_wq, 150);
-#else
-	schedule_task(&ieee->start_ibss_wq);
-#endif
 }
 
 /* this is called only in user context, with wx_sem held */
@@ -2873,22 +2778,22 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)
 	if(IS_DOT11D_ENABLE(ieee))
 		Dot11d_Reset(ieee);
 #endif
-	ieee->state = IEEE80211_NOLINK;
 	ieee->is_set_key = false;
 	ieee->link_change(ieee->dev);
 	//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
-	notify_wx_assoc_event(ieee);
+	if (ieee->state == IEEE80211_LINKED ||
+	    ieee->state == IEEE80211_ASSOCIATING) {
+		ieee->state = IEEE80211_NOLINK;
+		notify_wx_assoc_event(ieee);
+	}
+
+	ieee->state = IEEE80211_NOLINK;
 
 }
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
 void ieee80211_associate_retry_wq(struct work_struct *work)
 {
         struct delayed_work *dwork = container_of(work, struct delayed_work, work);
         struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, associate_retry_wq);
-#else
-void ieee80211_associate_retry_wq(struct ieee80211_device *ieee)
-{
-#endif
 	unsigned long flags;
 
 	down(&ieee->wx_sem);
@@ -2990,10 +2895,8 @@ void ieee80211_stop_protocol(struct ieee80211_device *ieee, u8 shutdown)
 
 	ieee80211_stop_send_beacons(ieee);
 	del_timer_sync(&ieee->associate_timer);
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	cancel_delayed_work(&ieee->associate_retry_wq);
 	cancel_delayed_work(&ieee->start_ibss_wq);
-#endif
 	ieee80211_stop_scan(ieee);
 
 	ieee80211_disassociate(ieee);
@@ -3114,11 +3017,6 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
 	ieee->sta_edca_param[3] = 0x002F3262;
 	ieee->aggregation = true;
 	ieee->enable_rx_imm_BA = 1;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	init_timer(&ieee->scan_timer);
-	ieee->scan_timer.data = (unsigned long)ieee;
-	ieee->scan_timer.function = ieee80211_softmac_scan_cb;
-#endif
 	ieee->tx_pending.txb = NULL;
 
 	init_timer(&ieee->associate_timer);
@@ -3129,16 +3027,12 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
 	ieee->beacon_timer.data = (unsigned long) ieee;
 	ieee->beacon_timer.function = ieee80211_send_beacon_cb;
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 #ifdef PF_SYNCTHREAD
 	ieee->wq = create_workqueue(DRV_NAME,0);
 #else
 	ieee->wq = create_workqueue(DRV_NAME);
 #endif
-#endif
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
         INIT_DELAYED_WORK(&ieee->start_ibss_wq,ieee80211_start_ibss_wq);
         INIT_WORK(&ieee->associate_complete_wq, ieee80211_associate_complete_wq);
         INIT_WORK(&ieee->associate_procedure_wq, ieee80211_associate_procedure_wq);
@@ -3146,23 +3040,6 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
         INIT_DELAYED_WORK(&ieee->associate_retry_wq, ieee80211_associate_retry_wq);
         INIT_WORK(&ieee->wx_sync_scan_wq,ieee80211_wx_sync_scan_wq);
 
-#else
-	INIT_WORK(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
-	INIT_WORK(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
-	INIT_WORK(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
-	INIT_WORK(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
-	INIT_WORK(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
-	INIT_WORK(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
-#endif
-
-#else
-	tq_init(&ieee->start_ibss_wq,(void(*)(void*)) ieee80211_start_ibss_wq,ieee);
-	tq_init(&ieee->associate_retry_wq,(void(*)(void*)) ieee80211_associate_retry_wq,ieee);
-	tq_init(&ieee->associate_complete_wq,(void(*)(void*)) ieee80211_associate_complete_wq,ieee);
-	tq_init(&ieee->associate_procedure_wq,(void(*)(void*)) ieee80211_associate_procedure_wq,ieee);
-	tq_init(&ieee->softmac_scan_wq,(void(*)(void*)) ieee80211_softmac_scan_wq,ieee);
-	tq_init(&ieee->wx_sync_scan_wq,(void(*)(void*)) ieee80211_wx_sync_scan_wq,ieee);
-#endif
 	sema_init(&ieee->wx_sem, 1);
 	sema_init(&ieee->scan_sem, 1);
 #ifdef ENABLE_IPS
@@ -3189,10 +3066,8 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee)
 #endif
 	del_timer_sync(&ieee->associate_timer);
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	cancel_delayed_work(&ieee->associate_retry_wq);
 	destroy_workqueue(ieee->wq);
-#endif
 
 	up(&ieee->wx_sem);
 }
@@ -3647,49 +3522,3 @@ void notify_wx_assoc_event(struct ieee80211_device *ieee)
 		memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
 	wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
 }
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_get_beacon);
-//EXPORT_SYMBOL(ieee80211_rtl_wake_queue);
-//EXPORT_SYMBOL(ieee80211_rtl_stop_queue);
-//EXPORT_SYMBOL(ieee80211_reset_queue);
-//EXPORT_SYMBOL(ieee80211_softmac_stop_protocol);
-//EXPORT_SYMBOL(ieee80211_softmac_start_protocol);
-//EXPORT_SYMBOL(ieee80211_is_shortslot);
-//EXPORT_SYMBOL(ieee80211_is_54g);
-//EXPORT_SYMBOL(ieee80211_wpa_supplicant_ioctl);
-//EXPORT_SYMBOL(ieee80211_ps_tx_ack);
-//EXPORT_SYMBOL(ieee80211_softmac_xmit);
-//EXPORT_SYMBOL(ieee80211_stop_send_beacons);
-//EXPORT_SYMBOL(notify_wx_assoc_event);
-//EXPORT_SYMBOL(SendDisassociation);
-//EXPORT_SYMBOL(ieee80211_disassociate);
-//EXPORT_SYMBOL(ieee80211_start_send_beacons);
-//EXPORT_SYMBOL(ieee80211_stop_scan);
-//EXPORT_SYMBOL(ieee80211_send_probe_requests);
-//EXPORT_SYMBOL(ieee80211_softmac_scan_syncro);
-//EXPORT_SYMBOL(ieee80211_start_scan_syncro);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_get_beacon);
-EXPORT_SYMBOL_NOVERS(ieee80211_rtl_wake_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_rtl_stop_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_reset_queue);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_stop_protocol);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_start_protocol);
-EXPORT_SYMBOL_NOVERS(ieee80211_is_shortslot);
-EXPORT_SYMBOL_NOVERS(ieee80211_is_54g);
-EXPORT_SYMBOL_NOVERS(ieee80211_wpa_supplicant_ioctl);
-EXPORT_SYMBOL_NOVERS(ieee80211_ps_tx_ack);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_xmit);
-EXPORT_SYMBOL_NOVERS(ieee80211_stop_send_beacons);
-EXPORT_SYMBOL_NOVERS(notify_wx_assoc_event);
-EXPORT_SYMBOL_NOVERS(SendDisassociation);
-EXPORT_SYMBOL_NOVERS(ieee80211_disassociate);
-EXPORT_SYMBOL_NOVERS(ieee80211_start_send_beacons);
-EXPORT_SYMBOL_NOVERS(ieee80211_stop_scan);
-EXPORT_SYMBOL_NOVERS(ieee80211_send_probe_requests);
-EXPORT_SYMBOL_NOVERS(ieee80211_softmac_scan_syncro);
-EXPORT_SYMBOL_NOVERS(ieee80211_start_scan_syncro);
-EXPORT_SYMBOL_NOVERS(ieee80211_sta_ps_send_null_frame);
-EXPORT_SYMBOL_NOVERS(ieee80211_sta_ps_send_pspoll_frame);
-#endif
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c
index 1bbd49f1d6f..d0a10807f7f 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c
@@ -312,14 +312,9 @@ out:
 	return 0;
 }
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
 void ieee80211_wx_sync_scan_wq(struct work_struct *work)
 {
         struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
-#else
-void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
-{
-#endif
 	short chan;
 	HT_EXTCHNL_OFFSET chan_offset=0;
 	HT_CHANNEL_WIDTH bandwidth=0;
@@ -337,8 +332,6 @@ void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
 	ieee80211_sta_ps_send_null_frame(ieee, 1);
 #endif
 
-	netif_carrier_off(ieee->dev);
-
 	if (ieee->data_hard_stop)
 		ieee->data_hard_stop(ieee->dev);
 
@@ -389,7 +382,6 @@ void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
 	if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
 		ieee80211_start_send_beacons(ieee);
 
-	netif_carrier_on(ieee->dev);
 	count = 0;
 	up(&ieee->wx_sem);
 
@@ -408,11 +400,7 @@ int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info
 	}
 
 	if ( ieee->state == IEEE80211_LINKED){
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 		queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
-#else
-		schedule_task(&ieee->wx_sync_scan_wq);
-#endif
 		/* intentionally forget to up sem */
 		return 0;
 	}
@@ -459,29 +447,8 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
 	if (wrqu->essid.flags && wrqu->essid.length) {
 		//first flush current network.ssid
 		len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
-#if LINUX_VERSION_CODE <  KERNEL_VERSION(2,6,20)
-		strncpy(ieee->current_network.ssid, extra, len);
-		ieee->current_network.ssid_len = len;
-#if 0
-		{
-			int i;
-			for (i=0; i<len; i++)
-				printk("%c ", extra[i]);
-			printk("\n");
-		}
-#endif
-#else
 		strncpy(ieee->current_network.ssid, extra, len+1);
 		ieee->current_network.ssid_len = len+1;
-#if 0
-		{
-			int i;
-			for (i=0; i<len + 1; i++)
-				printk("%c ", extra[i]);
-			printk("\n");
-		}
-#endif
-#endif
 		ieee->ssid_set = 1;
 	}
 	else{
@@ -659,42 +626,4 @@ exit:
 	return ret;
 
 }
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_wx_get_essid);
-//EXPORT_SYMBOL(ieee80211_wx_set_essid);
-//EXPORT_SYMBOL(ieee80211_wx_set_rate);
-//EXPORT_SYMBOL(ieee80211_wx_get_rate);
-//EXPORT_SYMBOL(ieee80211_wx_set_wap);
-//EXPORT_SYMBOL(ieee80211_wx_get_wap);
-//EXPORT_SYMBOL(ieee80211_wx_set_mode);
-//EXPORT_SYMBOL(ieee80211_wx_get_mode);
-//EXPORT_SYMBOL(ieee80211_wx_set_scan);
-//EXPORT_SYMBOL(ieee80211_wx_get_freq);
-//EXPORT_SYMBOL(ieee80211_wx_set_freq);
-//EXPORT_SYMBOL(ieee80211_wx_set_rawtx);
-//EXPORT_SYMBOL(ieee80211_wx_get_name);
-//EXPORT_SYMBOL(ieee80211_wx_set_power);
-//EXPORT_SYMBOL(ieee80211_wx_get_power);
-//EXPORT_SYMBOL(ieee80211_wlan_frequencies);
-//EXPORT_SYMBOL(ieee80211_wx_set_rts);
-//EXPORT_SYMBOL(ieee80211_wx_get_rts);
-#else
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_essid);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_essid);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rate);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rate);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_wap);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_wap);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mode);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_mode);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_scan);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_freq);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_freq);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rawtx);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_name);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_power);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_power);
-EXPORT_SYMBOL_NOVERS(ieee80211_wlan_frequencies);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rts);
-EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rts);
-#endif
+
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c
index a75f3668a40..dd8a221e21a 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_tx.c
@@ -286,12 +286,7 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
 	if (eth->h_proto != htons(ETH_P_IP))
 		return 0;
 
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,22))
 	ip = ip_hdr(skb);
-#else
-	ip = (struct iphdr*)(skb->data + sizeof(struct ether_header));
-#endif
 	switch (ip->tos & 0xfc) {
 		case 0x20:
 			return 2;
@@ -613,11 +608,7 @@ void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u
 
 int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0))
 	struct ieee80211_device *ieee = netdev_priv(dev);
-#else
-	struct ieee80211_device *ieee = (struct ieee80211_device *)dev->priv;
-#endif
 	struct ieee80211_txb *txb = NULL;
 	struct ieee80211_hdr_3addrqos *frag_hdr;
 	int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c
index 4971b1c8e7d..b74491c38ec 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c
@@ -54,25 +54,7 @@ struct modes_unit ieee80211_modes[] = {
 	{"N-5G",4},
 };
 
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,4,20)) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
-static inline char *
-iwe_stream_add_event_rsl(char *     stream,         /* Stream of events */
-                     char *     ends,           /* End of stream */
-                     struct iw_event *iwe,      /* Payload */
-                     int        event_len)      /* Real size of payload */
-{
-        /* Check if it's possible */
-        if((stream + event_len) < ends) {
-                iwe->len = event_len;
-		ndelay(1);   //new
-                memcpy(stream, (char *) iwe, event_len);
-                stream += event_len;
-        }
-        return stream;
-}
-#else
 #define iwe_stream_add_event_rsl iwe_stream_add_event
-#endif
 
 #define MAX_CUSTOM_LEN 64
 static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
@@ -93,11 +75,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	iwe.cmd = SIOCGIWAP;
 	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
 	memcpy(iwe.u.ap_addr.sa_data, network->bssid, ETH_ALEN);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
 	start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_ADDR_LEN);
-#else
-	start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_ADDR_LEN);
-#endif
 	/* Remaining entries will be displayed in the order we provide them */
 
 	/* Add the ESSID */
@@ -106,22 +84,14 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 //	if (network->flags & NETWORK_EMPTY_ESSID) {
 	if (network->ssid_len == 0) {
 		iwe.u.data.length = sizeof("<hidden>");
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, "<hidden>");
-#endif
         } else {
 		iwe.u.data.length = min(network->ssid_len, (u8)32);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
-#endif
         }
 	/* Add the protocol name */
 	iwe.cmd = SIOCGIWNAME;
-	for(i=0; i<(sizeof(ieee80211_modes)/sizeof(ieee80211_modes[0])); i++) {
+	for(i=0; i<ARRAY_SIZE(ieee80211_modes); i++) {
 		if(network->mode&(1<<i)) {
 			sprintf(pname,ieee80211_modes[i].mode_string,ieee80211_modes[i].mode_size);
 			pname +=ieee80211_modes[i].mode_size;
@@ -129,11 +99,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	}
 	*pname = '\0';
 	snprintf(iwe.u.name, IFNAMSIZ, "IEEE802.11%s", proto_name);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_CHAR_LEN);
-#else
-        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_CHAR_LEN);
-#endif
         /* Add mode */
         iwe.cmd = SIOCGIWMODE;
         if (network->capability &
@@ -142,11 +108,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 			iwe.u.mode = IW_MODE_MASTER;
 		else
 			iwe.u.mode = IW_MODE_ADHOC;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_UINT_LEN);
-#else
-                start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_UINT_LEN);
-#endif
         }
 
         /* Add frequency/channel */
@@ -156,11 +118,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	iwe.u.freq.m = network->channel;
 	iwe.u.freq.e = 0;
 	iwe.u.freq.i = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_FREQ_LEN);
-#else
-        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_FREQ_LEN);
-#endif
 	/* Add encryption capability */
 	iwe.cmd = SIOCGIWENCODE;
 	if (network->capability & WLAN_CAPABILITY_PRIVACY)
@@ -168,11 +126,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	else
 		iwe.u.data.flags = IW_ENCODE_DISABLED;
 	iwe.u.data.length = 0;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-#else
-        start = iwe_stream_add_point(start, stop, &iwe, network->ssid);
-#endif
 	/* Add basic and extended rates */
 	max_rate = 0;
 	p = custom;
@@ -216,33 +170,15 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		if (rate > max_rate)
 			max_rate = rate;
 	}
-#if 0
-	printk("max rate:%d ===basic rate:\n", max_rate);
-	for (i=0;i<network->rates_len;i++)
-		printk(" %x", network->rates[i]);
-	printk("\n=======extend rate\n");
-	for (i=0; i<network->rates_ex_len; i++)
-		printk(" %x", network->rates_ex[i]);
-	printk("\n");
-#endif
 	iwe.cmd = SIOCGIWRATE;
 	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
 	iwe.u.bitrate.value = max_rate * 500000;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_event_rsl(info, start, stop, &iwe,
 				     IW_EV_PARAM_LEN);
-#else
-        start = iwe_stream_add_event_rsl(start, stop, &iwe,
-				     IW_EV_PARAM_LEN);
-#endif
 	iwe.cmd = IWEVCUSTOM;
 	iwe.u.data.length = p - custom;
 	if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
-        start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
 	/* Add quality statistics */
 	/* TODO: Fix these values... */
 	iwe.cmd = IWEVQUAL;
@@ -257,21 +193,13 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
 		iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
 	iwe.u.qual.updated = 7;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
         start = iwe_stream_add_event_rsl(info, start, stop, &iwe, IW_EV_QUAL_LEN);
-#else
-        start = iwe_stream_add_event_rsl(start, stop, &iwe, IW_EV_QUAL_LEN);
-#endif
 	iwe.cmd = IWEVCUSTOM;
 	p = custom;
 
 	iwe.u.data.length = p - custom;
 	if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
             start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
-            start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
 #if (WIRELESS_EXT < 18)
 	if (ieee->wpa_enabled && network->wpa_ie_len){
 		char buf[MAX_WPA_IE_LEN * 2 + 30];
@@ -285,11 +213,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = IWEVCUSTOM;
 		iwe.u.data.length = strlen(buf);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
         }
 
 	if (ieee->wpa_enabled && network->rsn_ie_len){
@@ -304,11 +228,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = IWEVCUSTOM;
 		iwe.u.data.length = strlen(buf);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
         }
 #else
 	memset(&iwe, 0, sizeof(iwe));
@@ -318,11 +238,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		memcpy(buf, network->wpa_ie, network->wpa_ie_len);
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = network->wpa_ie_len;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
         }
 	memset(&iwe, 0, sizeof(iwe));
 	if (network->rsn_ie_len)
@@ -331,11 +247,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		memcpy(buf, network->rsn_ie, network->rsn_ie_len);
 		iwe.cmd = IWEVGENIE;
 		iwe.u.data.length = network->rsn_ie_len;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
                 start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-#else
-                start = iwe_stream_add_point(start, stop, &iwe, buf);
-#endif
         }
 #endif
 
@@ -348,11 +260,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 		      " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
 	iwe.u.data.length = p - custom;
 	if (iwe.u.data.length)
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27)
             start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-#else
-            start = iwe_stream_add_point(start, stop, &iwe, custom);
-#endif
 
 	return start;
 }
@@ -632,7 +540,6 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                                union iwreq_data *wrqu, char *extra)
 {
 	int ret = 0;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	struct net_device *dev = ieee->dev;
         struct iw_point *encoding = &wrqu->encoding;
         struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
@@ -807,7 +714,6 @@ done:
                 IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
                 return -EINVAL;
         }
-#endif
         return ret;
 }
 
@@ -870,7 +776,6 @@ int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
                                struct iw_request_info *info,
                                union iwreq_data *wrqu, char *extra)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	struct iw_mlme *mlme = (struct iw_mlme *) extra;
 	switch (mlme->cmd) {
         case IW_MLME_DEAUTH:
@@ -880,7 +785,6 @@ int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
 	 default:
                 return -EOPNOTSUPP;
         }
-#endif
 	return 0;
 }
 
@@ -888,7 +792,6 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
                                struct iw_request_info *info,
                                struct iw_param *data, char *extra)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	switch (data->flags & IW_AUTH_INDEX) {
         case IW_AUTH_WPA_VERSION:
 	     /*need to support wpa2 here*/
@@ -946,23 +849,12 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
 	default:
                 return -EOPNOTSUPP;
 	}
-#endif
 	return 0;
 }
 #endif
 #if 1
 int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
-#if 0
-	printk("====>%s()\n", __FUNCTION__);
-	{
-		int i;
-		for (i=0; i<len; i++)
-		printk("%2x ", ie[i]&0xff);
-		printk("\n");
-	}
-#endif
 	u8 *buf;
 
 	if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
@@ -992,29 +884,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
 		ieee->wpa_ie = NULL;
 		ieee->wpa_ie_len = 0;
 	}
-#endif
 	return 0;
 
 }
 #endif
-
-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
-//EXPORT_SYMBOL(ieee80211_wx_set_gen_ie);
-#if (WIRELESS_EXT >= 18)
-//EXPORT_SYMBOL(ieee80211_wx_set_mlme);
-//EXPORT_SYMBOL(ieee80211_wx_set_auth);
-//EXPORT_SYMBOL(ieee80211_wx_set_encode_ext);
-//EXPORT_SYMBOL(ieee80211_wx_get_encode_ext);
-#endif
-//EXPORT_SYMBOL(ieee80211_wx_get_scan);
-//EXPORT_SYMBOL(ieee80211_wx_set_encode);
-//EXPORT_SYMBOL(ieee80211_wx_get_encode);
-#else
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_gen_ie);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mlme);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_auth);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode_ext);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_scan);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_encode);
-//EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_encode);
-#endif
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
index 4c4b1df350a..b0c9c78eca4 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
@@ -1024,17 +1024,6 @@ u8 HTFilterMCSRate( struct ieee80211_device* ieee, u8* pSupportMCS, u8* pOperate
 	return true;
 }
 void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET	Offset);
-#if 0
-//I need move this function to other places, such as rx?
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20))
-void HTOnAssocRsp_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, ht_onAssRsp);
-#else
-void HTOnAssocRsp_wq(struct ieee80211_device *ieee)
-{
-#endif
-#endif
 void HTOnAssocRsp(struct ieee80211_device *ieee)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
@@ -1760,9 +1749,3 @@ void HTSetConnectBwModeCallback(struct ieee80211_device* ieee)
 
 	pHTInfo->bSwBwInProgress = false;
 }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-//EXPORT_SYMBOL_NOVERS(HTUpdateSelfAndPeerSetting);
-#else
-//EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
-#endif
diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c
index 7391f5f8f25..8bd5b173a7d 100644
--- a/drivers/staging/rtl8192e/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192e/r8190_rtl8256.c
@@ -501,13 +501,13 @@ SetRFPowerState8190(
 				if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
 				{ // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
 					bool rtstatus = true;
-					u32 InitilizeCount = 3;
+					u32 InitializeCount = 3;
 					do
 					{
-						InitilizeCount--;
+						InitializeCount--;
 						priv->RegRfOff = false;
 						rtstatus = NicIFEnableNIC(dev);
-					}while( (rtstatus != true) &&(InitilizeCount >0) );
+					}while( (rtstatus != true) &&(InitializeCount >0) );
 
 					if(rtstatus != true)
 					{
diff --git a/drivers/staging/rtl8192e/r8192E.h b/drivers/staging/rtl8192e/r8192E.h
index f4be9cc1100..865cdc00897 100644
--- a/drivers/staging/rtl8192e/r8192E.h
+++ b/drivers/staging/rtl8192e/r8192E.h
@@ -1468,7 +1468,6 @@ typedef	union _AC_PARAM{
 
 #endif
 bool init_firmware(struct net_device *dev);
-void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb);
 short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
 u32 read_cam(struct net_device *dev, u8 addr);
 void write_cam(struct net_device *dev, u8 addr, u32 data);
@@ -1503,10 +1502,9 @@ void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
 void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
 void rtl8187_set_rxconf(struct net_device *dev);
 //short check_nic_enough_desc(struct net_device *dev, priority_t priority);
-void rtl8192_start_beacon(struct net_device *dev);
 void CamResetAllEntry(struct net_device* dev);
 void EnableHWSecurityConfig8192(struct net_device *dev);
-void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
+void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, const u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
 void CamPrintDbgReg(struct net_device* dev);
 extern	void	dm_cck_txpower_adjust(struct net_device *dev,bool  binch14);
 extern void firmware_init_param(struct net_device *dev);
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index eb41402d1d3..4cd071adf84 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -92,12 +92,8 @@ u32 rt_global_debug_component = \
 			//	COMP_POWER_TRACKING	|
                         // 	COMP_INTR       |
 				COMP_ERR ; //always open err flags on
-#ifndef PCI_DEVICE
-#define PCI_DEVICE(vend,dev)\
-	.vendor=(vend),.device=(dev),\
-	.subvendor=PCI_ANY_ID,.subdevice=PCI_ANY_ID
-#endif
-static struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = {
+
+static const struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = {
 #ifdef RTL8190P
 	/* Realtek */
 	/* Dlink */
@@ -155,6 +151,16 @@ static struct pci_driver rtl8192_pci_driver = {
 #endif
 };
 
+static void rtl8192_start_beacon(struct net_device *dev);
+static void rtl8192_stop_beacon(struct net_device *dev);
+static void rtl819x_watchdog_wqcallback(struct work_struct *work);
+static void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
+static void rtl8192_irq_tx_tasklet(struct r8192_priv *priv);
+static void rtl8192_prepare_beacon(struct r8192_priv *priv);
+static irqreturn_t rtl8192_interrupt(int irq, void *netdev);
+static void rtl8192_try_wake_queue(struct net_device *dev, int pri);
+static void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb);
+
 #ifdef ENABLE_DOT11D
 
 typedef struct _CHANNEL_LIST
@@ -163,7 +169,7 @@ typedef struct _CHANNEL_LIST
 	u8	Len;
 }CHANNEL_LIST, *PCHANNEL_LIST;
 
-static CHANNEL_LIST ChannelPlan[] = {
+static const CHANNEL_LIST ChannelPlan[] = {
 	{{1,2,3,4,5,6,7,8,9,10,11,36,40,44,48,52,56,60,64,149,153,157,161,165},24},  		//FCC
 	{{1,2,3,4,5,6,7,8,9,10,11},11},                    				//IC
 	{{1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64},21},  	//ETSI
@@ -349,8 +355,8 @@ u8 rtl8192e_ap_sec_type(struct ieee80211_device *ieee)
 	//struct r8192_priv* priv = ieee80211_priv(dev);
 	//struct ieee80211_device *ieee = priv->ieee80211;
 
-	static u8 ccmp_ie[4] = {0x00,0x50,0xf2,0x04};
-	static u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
+	static const u8 ccmp_ie[4] = {0x00,0x50,0xf2,0x04};
+	static const u8 ccmp_rsn_ie[4] = {0x00, 0x0f, 0xac, 0x04};
 	int wpa_ie_len= ieee->wpa_ie_len;
 	struct ieee80211_crypt_data* crypt;
 	int encrypt;
@@ -487,15 +493,13 @@ rtl8192e_SetHwReg(struct net_device *dev,u8 variable,u8* val)
 /* this might still called in what was the PHY rtl8185/rtl8192 common code
  * plans are to possibilty turn it again in one common code...
  */
-inline void force_pci_posting(struct net_device *dev)
+void force_pci_posting(struct net_device *dev)
 {
 }
 
 
 //warning message WB
-irqreturn_t rtl8192_interrupt(int irq, void *netdev);
 //static struct net_device_stats *rtl8192_stats(struct net_device *dev);
-void rtl8192_commit(struct net_device *dev);
 //void rtl8192_restart(struct net_device *dev);
 void rtl8192_restart(struct work_struct *work);
 //void rtl8192_rq_tx_ack(struct work_struct *work);
@@ -940,7 +944,7 @@ void rtl8192_rx_enable(struct net_device *dev)
  *  HIGH_QUEUE     ===>                        7
  *  BEACON_QUEUE   ===>                        8
  *  */
-static u32 TX_DESC_BASE[] = {BKQDA, BEQDA, VIQDA, VOQDA, HCCAQDA, CQDA, MQDA, HQDA, BQDA};
+static const u32 TX_DESC_BASE[] = {BKQDA, BEQDA, VIQDA, VOQDA, HCCAQDA, CQDA, MQDA, HQDA, BQDA};
 void rtl8192_tx_enable(struct net_device *dev)
 {
     struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -1116,7 +1120,7 @@ static void rtl8192_reset(struct net_device *dev)
 }
 #endif
 
-static u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
+static const u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
 inline u16 rtl8192_rate2rate(short rate)
 {
 	if (rate >11) return 0;
@@ -1252,8 +1256,6 @@ static int rtl8192_hard_start_xmit(struct sk_buff *skb,struct net_device *dev)
 }
 
 
-void rtl8192_try_wake_queue(struct net_device *dev, int pri);
-
 static void rtl8192_tx_isr(struct net_device *dev, int prio)
 {
     struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -1733,11 +1735,6 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff* skb)
     pdesc->NoEnc = 1;
     pdesc->SecType = 0x0;
     if (tcb_desc->bHwSec) {
-        static u8 tmp =0;
-        if (!tmp) {
-            printk("==>================hw sec\n");
-            tmp = 1;
-        }
         switch (priv->ieee80211->pairwise_key_type) {
             case KEY_TYPE_WEP40:
             case KEY_TYPE_WEP104:
@@ -1988,7 +1985,7 @@ static void rtl8192_update_beacon(struct work_struct * work)
 /*
 * background support to run QoS activate functionality
 */
-static int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
+static const int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
 static void rtl8192_qos_activate(struct work_struct * work)
 {
         struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
@@ -2646,11 +2643,6 @@ static void rtl8192_init_priv_lock(struct r8192_priv* priv)
 	mutex_init(&priv->mutex);
 }
 
-extern  void    rtl819x_watchdog_wqcallback(struct work_struct *work);
-
-void rtl8192_irq_rx_tasklet(struct r8192_priv *priv);
-void rtl8192_irq_tx_tasklet(struct r8192_priv *priv);
-void rtl8192_prepare_beacon(struct r8192_priv *priv);
 //init tasklet and wait_queue here. only 2.6 above kernel is considered
 #define DRV_NAME "wlan0"
 static void rtl8192_init_priv_task(struct net_device* dev)
@@ -3807,7 +3799,7 @@ static RT_STATUS rtl8192_adapter_start(struct net_device *dev)
 
 }
 
-void rtl8192_prepare_beacon(struct r8192_priv *priv)
+static void rtl8192_prepare_beacon(struct r8192_priv *priv)
 {
 	struct sk_buff *skb;
 	//unsigned long flags;
@@ -3837,7 +3829,7 @@ void rtl8192_prepare_beacon(struct r8192_priv *priv)
  * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
  * be used to stop beacon transmission
  */
-void rtl8192_start_beacon(struct net_device *dev)
+static void rtl8192_start_beacon(struct net_device *dev)
 {
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 	struct ieee80211_network *net = &priv->ieee80211->current_network;
@@ -4124,14 +4116,14 @@ static void CamRestoreAllEntry(struct net_device *dev)
 {
 	u8 EntryId = 0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8*	MacAddr = priv->ieee80211->current_network.bssid;
+	const u8*	MacAddr = priv->ieee80211->current_network.bssid;
 
-	static u8	CAM_CONST_ADDR[4][6] = {
+	static const u8	CAM_CONST_ADDR[4][6] = {
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
-	static u8	CAM_CONST_BROAD[] =
+	static const u8	CAM_CONST_BROAD[] =
 		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 
 	RT_TRACE(COMP_SEC, "CamRestoreAllEntry: \n");
@@ -4318,7 +4310,6 @@ RESET_START:
 			del_timer_sync(&ieee->associate_timer);
                         cancel_delayed_work(&ieee->associate_retry_wq);
 			ieee80211_stop_scan(ieee);
-			netif_carrier_off(dev);
 			up(&ieee->wx_sem);
 		}
 		else{
@@ -4669,7 +4660,7 @@ static void rtl819x_update_rxcounts(
 }
 
 
-void rtl819x_watchdog_wqcallback(struct work_struct *work)
+static void rtl819x_watchdog_wqcallback(struct work_struct *work)
 {
 	struct delayed_work *dwork = container_of(work,struct delayed_work,work);
        struct r8192_priv *priv = container_of(dwork,struct r8192_priv,watch_dog_wq);
@@ -6076,7 +6067,7 @@ static void rtl8192_tx_resume(struct net_device *dev)
 	}
 }
 
-void rtl8192_irq_tx_tasklet(struct r8192_priv *priv)
+static void rtl8192_irq_tx_tasklet(struct r8192_priv *priv)
 {
        rtl8192_tx_resume(priv->ieee80211->dev);
 }
@@ -6305,7 +6296,7 @@ done:
 
 }
 
-void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
+static void rtl8192_irq_rx_tasklet(struct r8192_priv *priv)
 {
        rtl8192_rx(priv->ieee80211->dev);
 	/* unmask RDU */
@@ -6640,7 +6631,7 @@ static void __exit rtl8192_pci_module_exit(void)
 }
 
 //warning message WB
-irqreturn_t rtl8192_interrupt(int irq, void *netdev)
+static irqreturn_t rtl8192_interrupt(int irq, void *netdev)
 {
     struct net_device *dev = (struct net_device *) netdev;
     struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -6784,7 +6775,7 @@ irqreturn_t rtl8192_interrupt(int irq, void *netdev)
     return IRQ_HANDLED;
 }
 
-void rtl8192_try_wake_queue(struct net_device *dev, int pri)
+static void rtl8192_try_wake_queue(struct net_device *dev, int pri)
 {
 #if 0
 	unsigned long flags;
@@ -6847,7 +6838,7 @@ void setKey(	struct net_device *dev,
 		u8 EntryNo,
 		u8 KeyIndex,
 		u16 KeyType,
-		u8 *MacAddr,
+		const u8 *MacAddr,
 		u8 DefaultKey,
 		u32 *KeyContent )
 {
diff --git a/drivers/staging/rtl8192e/r8192E_dm.c b/drivers/staging/rtl8192e/r8192E_dm.c
index a249f00da60..a5884c6bcc2 100644
--- a/drivers/staging/rtl8192e/r8192E_dm.c
+++ b/drivers/staging/rtl8192e/r8192E_dm.c
@@ -26,20 +26,20 @@ Major Change History:
 // Indicate different AP vendor for IOT issue.
 //
 #ifdef  RTL8190P
-static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0x5e4322, 	0x5e4322,  	0x604322, 	0xa44f, 	0x5e4322,	0x5e4322};
-static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0xa44f, 	0x5e4322,  	0x604322, 	0x5e4322, 	0x5e4322,	0x5e4322};
 #else
 #ifdef RTL8192E
-static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0x5e4322, 	0x5e4322, 	0x604322, 	0xa44f, 	0x5e4322,	0x5e4322};
-static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0xa44f,		0x5e4322,  	0x604322, 	0x5e4322, 	0x5e4322, 	0x5e4322};
 #else
-static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_DL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0x5e4322, 	0x5e4322, 	0x604322, 	0xa44f, 	0x5ea44f, 	0x5e4322};
-static u32 edca_setting_UL[HT_IOT_PEER_MAX] =
+static const u32 edca_setting_UL[HT_IOT_PEER_MAX] =
 { 0x5e4322, 	0xa44f, 	0x5e4322, 	0x604322, 	0x5ea44f, 	0x5ea44f, 	0x5e4322};
 #endif
 #endif
@@ -592,7 +592,7 @@ static void dm_bandwidth_autoswitch(struct net_device * dev)
 
 //OFDM default at 0db, index=6.
 #ifndef RTL8190P
-static u32 OFDMSwingTable[OFDM_Table_Length] = {
+static const u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x7f8001fe,	// 0, +6db
 	0x71c001c7,	// 1, +5db
 	0x65400195,	// 2, +4db
@@ -613,7 +613,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = {
 	0x12000048,	// 17, -11db
 	0x10000040	// 18, -12db
 };
-static u8	CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
+static const u8 CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
 	{0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04},	// 0, +0db ===> CCK40M default
 	{0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03},	// 1, -1db
 	{0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03},	// 2, -2db
@@ -628,7 +628,7 @@ static u8	CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = {
 	{0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01}	// 11, -11db
 };
 
-static u8	CCKSwingTable_Ch14[CCK_Table_length][8] = {
+static const u8 CCKSwingTable_Ch14[CCK_Table_length][8] = {
 	{0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00},	// 0, +0db  ===> CCK40M default
 	{0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00},	// 1, -1db
 	{0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00},	// 2, -2db
@@ -2094,8 +2094,6 @@ static void dm_ctrl_initgain_byrssi(struct net_device *dev)
 		dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev);
 	else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI)
 		dm_ctrl_initgain_byrssi_by_driverrssi(dev);
-	else
-		return;
 }
 
 
@@ -2938,8 +2936,6 @@ void dm_gpio_change_rf_callback(struct work_struct *work)
 	RT_RF_POWER_STATE	eRfPowerStateToSet;
 	bool bActuallySet = false;
 
-		bActuallySet=false;
-
 		if(!priv->up)
 		{
 		RT_TRACE((COMP_INIT | COMP_POWER | COMP_RF),"dm_gpio_change_rf_callback(): Callback function breaks out!!\n");
diff --git a/drivers/staging/rtl8192e/r8192E_wx.c b/drivers/staging/rtl8192e/r8192E_wx.c
index 0b0f39ce3ce..5742cee8120 100644
--- a/drivers/staging/rtl8192e/r8192E_wx.c
+++ b/drivers/staging/rtl8192e/r8192E_wx.c
@@ -26,7 +26,7 @@
 #endif
 
 #define RATE_COUNT 12
-static u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
+static const u32 rtl8180_rates[] = {1000000,2000000,5500000,11000000,
 	6000000,9000000,12000000,18000000,24000000,36000000,48000000,54000000};
 
 
@@ -137,161 +137,6 @@ static int r8192_wx_get_power(struct net_device *dev,
 	return ieee80211_wx_get_power(priv->ieee80211,info,wrqu,extra);
 }
 
-#ifdef JOHN_IOCTL
-u16 read_rtl8225(struct net_device *dev, u8 addr);
-void write_rtl8225(struct net_device *dev, u8 adr, u16 data);
-u32 john_read_rtl8225(struct net_device *dev, u8 adr);
-void _write_rtl8225(struct net_device *dev, u8 adr, u16 data);
-
-static int r8192_wx_read_regs(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 addr;
-	u16 data1;
-
-	down(&priv->wx_sem);
-
-
-	get_user(addr,(u8*)wrqu->data.pointer);
-	data1 = read_rtl8225(dev, addr);
-	wrqu->data.length = data1;
-
-	up(&priv->wx_sem);
-	return 0;
-
-}
-
-static int r8192_wx_write_regs(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-        u8 addr;
-
-        down(&priv->wx_sem);
-
-        get_user(addr, (u8*)wrqu->data.pointer);
-	write_rtl8225(dev, addr, wrqu->data.length);
-
-        up(&priv->wx_sem);
-	return 0;
-
-}
-
-void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
-u8 rtl8187_read_phy(struct net_device *dev,u8 adr, u32 data);
-
-static int r8192_wx_read_bb(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-	u8 databb;
-#if 0
-	int i;
-	for(i=0;i<12;i++) printk("%8x\n", read_cam(dev, i) );
-#endif
-
-        down(&priv->wx_sem);
-
-	databb = rtl8187_read_phy(dev, (u8)wrqu->data.length, 0x00000000);
-	wrqu->data.length = databb;
-
-	up(&priv->wx_sem);
-	return 0;
-}
-
-void rtl8187_write_phy(struct net_device *dev, u8 adr, u32 data);
-static int r8192_wx_write_bb(struct net_device *dev,
-                               struct iw_request_info *info,
-                               union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-        u8 databb;
-
-        down(&priv->wx_sem);
-
-        get_user(databb, (u8*)wrqu->data.pointer);
-        rtl8187_write_phy(dev, wrqu->data.length, databb);
-
-        up(&priv->wx_sem);
-        return 0;
-
-}
-
-
-static int r8192_wx_write_nicb(struct net_device *dev,
-                               struct iw_request_info *info,
-                               union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-        u32 addr;
-
-        down(&priv->wx_sem);
-
-        get_user(addr, (u32*)wrqu->data.pointer);
-        write_nic_byte(dev, addr, wrqu->data.length);
-
-        up(&priv->wx_sem);
-        return 0;
-
-}
-static int r8192_wx_read_nicb(struct net_device *dev,
-                               struct iw_request_info *info,
-                               union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-        u32 addr;
-        u16 data1;
-
-        down(&priv->wx_sem);
-
-        get_user(addr,(u32*)wrqu->data.pointer);
-        data1 = read_nic_byte(dev, addr);
-        wrqu->data.length = data1;
-
-        up(&priv->wx_sem);
-        return 0;
-}
-
-static int r8192_wx_get_ap_status(struct net_device *dev,
-                               struct iw_request_info *info,
-                               union iwreq_data *wrqu, char *extra)
-{
-        struct r8192_priv *priv = ieee80211_priv(dev);
-        struct ieee80211_device *ieee = priv->ieee80211;
-        struct ieee80211_network *target;
-	int name_len;
-
-        down(&priv->wx_sem);
-
-	//count the length of input ssid
-	for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++);
-
-	//search for the correspoding info which is received
-        list_for_each_entry(target, &ieee->network_list, list) {
-                if ( (target->ssid_len == name_len) &&
-		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
-			if(target->wpa_ie_len>0 || target->rsn_ie_len>0 )
-				//set flags=1 to indicate this ap is WPA
-				wrqu->data.flags = 1;
-			else wrqu->data.flags = 0;
-
-
-		break;
-                }
-        }
-
-        up(&priv->wx_sem);
-        return 0;
-}
-
-
-
-#endif
-
 static int r8192_wx_set_rawtx(struct net_device *dev,
 			       struct iw_request_info *info,
 			       union iwreq_data *wrqu, char *extra)
diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c
index 7bd4fae0667..ffd1e97e27b 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.c
+++ b/drivers/staging/rtl8192e/r819xE_phy.c
@@ -7,7 +7,7 @@
 #ifdef ENABLE_DOT11D
 #include "ieee80211/dot11d.h"
 #endif
-static u32 RF_CHANNEL_TABLE_ZEBRA[] = {
+static const u32 RF_CHANNEL_TABLE_ZEBRA[] = {
 	0,
 	0x085c, //2412 1
 	0x08dc, //2417 2
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
index b422ea1ecf9..27b89a43267 100644
--- a/drivers/staging/rtl8192su/Kconfig
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -4,5 +4,6 @@ config RTL8192SU
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	select EEPROM_93CX6
+	select CRYPTO
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192su/TODO b/drivers/staging/rtl8192su/TODO
index 3c8da157a93..b15204ea4ec 100644
--- a/drivers/staging/rtl8192su/TODO
+++ b/drivers/staging/rtl8192su/TODO
@@ -1,4 +1,10 @@
 TODO:
+- merge realteks bugfixes and new features into the driver:
+  - an updated version of this driver can be found here:
+    http://www.getnet.eu/products_GN-621U.html
+  - note:
+    realtek has stripped alomost all comments from the source,
+    so please leave all comments that may help in development in the code.
 - prepare private ieee80211 stack for merge with rtl8187se's version:
   - remove rtl8192su's specific dead code
   - cleanup ieee80211.h
@@ -7,7 +13,6 @@ TODO:
 - switch to use shared "librtl" instead of private ieee80211 stack
 - switch to use LIB80211
 - switch to use MAC80211
-- switch to use EEPROM_93CX6
 - use kernel coding style
 - checkpatch.pl fixes
 - sparse fixes
diff --git a/drivers/staging/rtl8192su/ieee80211/dot11d.c b/drivers/staging/rtl8192su/ieee80211/dot11d.c
index 22484621478..6275cc75ec8 100644
--- a/drivers/staging/rtl8192su/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192su/ieee80211/dot11d.c
@@ -1,11 +1,21 @@
-//-----------------------------------------------------------------------------
-//	File:
-//		Dot11d.c
-//
-//	Description:
-//		Implement 802.11d.
-//
-//-----------------------------------------------------------------------------
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 
 #include "dot11d.h"
 
@@ -50,7 +60,6 @@ Dot11d_Reset(struct ieee80211_device *ieee)
 	pDot11dInfo->CountryIeLen = 0;
 	RESET_CIE_WATCHDOG(ieee);
 
-	//printk("Dot11d_Reset()\n");
 }
 
 //
@@ -105,7 +114,6 @@ Dot11d_UpdateCountryIe(
 		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8*)pTriple + 3);
 	}
 #if 1
-	//printk("Dot11d_UpdateCountryIe(): Channel List:\n");
 	printk("Channel List:");
 	for(i=1; i<= MAX_CHANNEL_NUMBER; i++)
 		if(pDot11dInfo->channel_map[i] > 0)
diff --git a/drivers/staging/rtl8192su/ieee80211/dot11d.h b/drivers/staging/rtl8192su/ieee80211/dot11d.h
index 913ac5d97e7..62a2c905e1f 100644
--- a/drivers/staging/rtl8192su/ieee80211/dot11d.h
+++ b/drivers/staging/rtl8192su/ieee80211/dot11d.h
@@ -1,10 +1,26 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef __INC_DOT11D_H
 #define __INC_DOT11D_H
 
 #include "ieee80211.h"
 
-//#define DOT11D_MAX_CHNL_NUM 83
-
 typedef struct _CHNL_TXPOWER_TRIPLE {
 	u8 FirstChnl;
 	u8  NumChnls;
@@ -18,7 +34,6 @@ typedef enum _DOT11D_STATE {
 }DOT11D_STATE;
 
 typedef struct _RT_DOT11D_INFO {
-	//DECLARE_RT_OBJECT(RT_DOT11D_INFO);
 
 	bool bEnabled; // dot11MultiDomainCapabilityEnabled
 
@@ -28,8 +43,6 @@ typedef struct _RT_DOT11D_INFO {
 	u8  CountryIeWatchdog;
 
 	u8  channel_map[MAX_CHANNEL_NUMBER+1];  //!!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan)
-	//u8  ChnlListLen; // #Bytes valid in ChnlList[].
-	//u8  ChnlList[DOT11D_MAX_CHNL_NUM];
 	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
 
 	DOT11D_STATE State;
@@ -95,4 +108,4 @@ int ToLegalChannel(
 	struct ieee80211_device * dev,
 	u8 channel
 );
-#endif // #ifndef __INC_DOT11D_H
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211.h b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
index bcb2b12a839..1d6789db4e4 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211.h
@@ -168,6 +168,10 @@ typedef struct ieee_param {
 /* QOS control */
 #define IEEE80211_QCTL_TID              0x000F
 
+#define OUI_SUBTYPE_WMM_INFO		0
+#define OUI_SUBTYPE_WMM_PARAM	1
+#define OUI_SUBTYPE_QOS_CAPABI	5
+
 /* debug macros */
 #define CONFIG_IEEE80211_DEBUG
 #ifdef CONFIG_IEEE80211_DEBUG
@@ -1120,11 +1124,27 @@ enum {
 	COUNTRY_CODE_MKK = 5,
 	COUNTRY_CODE_MKK1 = 6,
 	COUNTRY_CODE_ISRAEL = 7,
-	COUNTRY_CODE_TELEC,
-	COUNTRY_CODE_MIC,
-	COUNTRY_CODE_GLOBAL_DOMAIN
+	COUNTRY_CODE_TELEC = 8,
+	COUNTRY_CODE_MIC = 9,
+	COUNTRY_CODE_GLOBAL_DOMAIN = 10,
+	COUNTRY_CODE_WORLD_WIDE_13 = 11,
+	COUNTRY_CODE_TELEC_NETGEAR = 12,
+	COUNTRY_CODE_MAX
 };
 
+#define	NUM_PMKID_CACHE		16
+
+typedef struct _RT_PMKID_LIST
+{
+	u8						bUsed;
+	u8 						Bssid[6];
+	u8						PMKID[16];
+	u8						SsidBuf[33];
+	u8*						ssid_octet;
+	u16 					ssid_length;
+} RT_PMKID_LIST, *PRT_PMKID_LIST;
+
+
 #include "ieee80211_r8192s.h"
 
 struct ieee80211_device {
@@ -1134,6 +1154,7 @@ struct ieee80211_device {
 	/* hw security related */
 	u8 hwsec_active;
 	bool is_silent_reset;
+	bool force_mic_error;
 	bool is_roaming;
 	bool ieee_up;
 	bool bSupportRemoteWakeUp;
@@ -1247,6 +1268,7 @@ struct ieee80211_device {
 	int bcrx_sta_key; /* use individual keys to override default keys even
 			   * with RX of broad/multicast frames */
 
+	RT_PMKID_LIST		PMKIDList[NUM_PMKID_CACHE];
 	/* Fragmentation structures */
 	// each streaming contain a entry
 	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
@@ -1295,6 +1317,10 @@ struct ieee80211_device {
 	 */
 	void *pDot11dInfo;
 	bool bGlobalDomain;
+
+	u8   IbssStartChnl;
+	u8   ibss_maxjoin_chal;
+
 	int rate;       /* current rate */
 	int basic_rate;
 	//FIXME: pleace callback, see if redundant with softmac_features
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c
index 80194233943..24e7d595e3c 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c
@@ -11,7 +11,6 @@
  *
  */
 
-//#include <linux/config.h>
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -201,7 +200,7 @@ static struct ieee80211_crypto_ops ieee80211_crypt_null = {
 	.owner			= THIS_MODULE,
 };
 
-int __init ieee80211_crypto_init(void)
+int ieee80211_crypto_init(void)
 {
 	int ret = -ENOMEM;
 
@@ -221,7 +220,7 @@ out:
 	return ret;
 }
 
-void __exit ieee80211_crypto_deinit(void)
+void ieee80211_crypto_deinit(void)
 {
 	struct list_head *ptr, *n;
 	struct ieee80211_crypto_alg *alg = NULL;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h
index b58a3bcc0dc..42e52aedd29 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.h
@@ -49,7 +49,7 @@ struct ieee80211_crypto_ops {
 	 * These can be NULL if full MSDU operations are not needed. */
 	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
 	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
-			    void *priv);
+			    void *priv, struct ieee80211_device* ieee);
 
 	int (*set_key)(void *key, int len, u8 *seq, void *priv);
 	int (*get_key)(void *key, int len, u8 *seq, void *priv);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c
index 77de957f1b1..caee44ba3bc 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_ccmp.c
@@ -9,7 +9,6 @@
  * more details.
  */
 
-//#include <linux/config.h>
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -131,7 +130,6 @@ static void ccmp_init_blocks(struct crypto_tfm *tfm,
 	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
 		       (WLAN_FC_GET_STYPE(fc) & 0x08));
         */
-	// fixed by David :2006.9.6
 	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
 		       (WLAN_FC_GET_STYPE(fc) & 0x80));
 	aad_len = 22;
@@ -210,7 +208,6 @@ static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 	pos = skb_push(skb, CCMP_HDR_LEN);
 	memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
 	pos += hdr_len;
-//	mic = skb_put(skb, CCMP_MIC_LEN);
 
 	i = CCMP_PN_LEN - 1;
 	while (i >= 0) {
@@ -240,7 +237,6 @@ static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
 		u8 *e = key->tx_e;
 		u8 *s0 = key->tx_s0;
 
-		//mic is moved to here by john
 		mic = skb_put(skb, CCMP_MIC_LEN);
 
 		ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
@@ -445,7 +441,6 @@ static char * ieee80211_ccmp_print_stats(char *p, void *priv)
 
 void ieee80211_ccmp_null(void)
 {
-//    printk("============>%s()\n", __FUNCTION__);
 	return;
 }
 
@@ -470,7 +465,7 @@ int __init ieee80211_crypto_ccmp_init(void)
 	return ieee80211_register_crypto_ops(&ieee80211_crypt_ccmp);
 }
 
-void __exit ieee80211_crypto_ccmp_exit(void)
+void ieee80211_crypto_ccmp_exit(void)
 {
 	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
 }
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c
index ade5f6f1366..5ab94a9665e 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_tkip.c
@@ -9,7 +9,6 @@
  * more details.
  */
 
-//#include <linux/config.h>
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -43,6 +42,7 @@ struct ieee80211_tkip_data {
 
 	u32 rx_iv32;
 	u16 rx_iv16;
+	bool initialized;
 	u16 rx_ttak[5];
 	int rx_phase1_done;
 	u32 rx_iv32_new;
@@ -433,8 +433,8 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 
 	if (!tcb_desc->bHwSec)
 	{
-		if (iv32 < tkey->rx_iv32 ||
-		(iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16)) {
+		if ((iv32 < tkey->rx_iv32 ||
+		(iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16))&&tkey->initialized) {
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
 				" previous TSC %08x%04x received TSC "
@@ -444,6 +444,7 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 			tkey->dot11RSNAStatsTKIPReplays++;
 			return -4;
 		}
+                tkey->initialized = true;
 
 		if (iv32 != tkey->rx_iv32 || !tkey->rx_phase1_done) {
 			tkip_mixing_phase1(tkey->rx_ttak, tkey->key, hdr->addr2, iv32);
@@ -452,10 +453,8 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
 		tkip_mixing_phase2(rc4key, tkey->key, tkey->rx_ttak, iv16);
 
 		plen = skb->len - hdr_len - 12;
-
+		sg_init_one(&sg, pos, plen+4);
 		crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-		sg_init_one(&sg, pos, plen + 4);
-
 		if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
 			if (net_ratelimit()) {
 				printk(KERN_DEBUG ": TKIP: failed to decrypt "
@@ -571,12 +570,9 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *pri
 
 	michael_mic_hdr(skb, tkey->tx_hdr);
 
-	// { david, 2006.9.1
-	// fix the wpa process with wmm enabled.
 	if(IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl))) {
 		tkey->tx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
 	}
-	// }
 	pos = skb_put(skb, 8);
 
 	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
@@ -608,7 +604,7 @@ static void ieee80211_michael_mic_failure(struct net_device *dev,
 }
 
 static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
-				     int hdr_len, void *priv)
+				     int hdr_len, void *priv, struct ieee80211_device* ieee)
 {
 	struct ieee80211_tkip_data *tkey = priv;
 	u8 mic[8];
@@ -620,12 +616,9 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
 		return -1;
 
 	michael_mic_hdr(skb, tkey->rx_hdr);
-	// { david, 2006.9.1
-	// fix the wpa process with wmm enabled.
 	if(IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl))) {
 		tkey->rx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
 	}
-	// }
 
 	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
 			skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
@@ -637,9 +630,14 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
 		       "MSDU from %pM keyidx=%d\n",
 		       skb->dev ? skb->dev->name : "N/A", hdr->addr2,
 		       keyidx);
-		if (skb->dev)
+                printk("%d, force_mic_error = %d\n", (memcmp(mic, skb->data + skb->len - 8, 8) != 0),\
+                        ieee->force_mic_error);
+		if (skb->dev) {
+                        printk("skb->dev != NULL\n");
 			ieee80211_michael_mic_failure(skb->dev, hdr, keyidx);
+                }
 		tkey->dot11RSNAStatsTKIPLocalMICFailures++;
+                ieee->force_mic_error = false;
 		return -1;
 	}
 
@@ -762,18 +760,17 @@ static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
 	.owner		        = THIS_MODULE,
 };
 
-int __init ieee80211_crypto_tkip_init(void)
+int ieee80211_crypto_tkip_init(void)
 {
 	return ieee80211_register_crypto_ops(&ieee80211_crypt_tkip);
 }
 
-void __exit ieee80211_crypto_tkip_exit(void)
+void ieee80211_crypto_tkip_exit(void)
 {
 	ieee80211_unregister_crypto_ops(&ieee80211_crypt_tkip);
 }
 
 void ieee80211_tkip_null(void)
 {
-//    printk("============>%s()\n", __FUNCTION__);
         return;
 }
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c
index a1c0a59122b..5219bfd4ea8 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt_wep.c
@@ -9,7 +9,6 @@
  * more details.
  */
 
-//#include <linux/config.h>
 #include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -279,18 +278,17 @@ static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
 	.owner			= THIS_MODULE,
 };
 
-int __init ieee80211_crypto_wep_init(void)
+int ieee80211_crypto_wep_init(void)
 {
 	return ieee80211_register_crypto_ops(&ieee80211_crypt_wep);
 }
 
-void __exit ieee80211_crypto_wep_exit(void)
+void ieee80211_crypto_wep_exit(void)
 {
 	ieee80211_unregister_crypto_ops(&ieee80211_crypt_wep);
 }
 
 void ieee80211_wep_null(void)
 {
-//	printk("============>%s()\n", __FUNCTION__);
         return;
 }
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
index a87650a517b..4945b3dbf72 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -31,7 +31,6 @@
 *******************************************************************************/
 
 #include <linux/compiler.h>
-//#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/if_arp.h>
 #include <linux/in6.h>
@@ -142,7 +141,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 	spin_lock_init(&ieee->wpax_suitlist_lock);
 	spin_lock_init(&ieee->bw_spinlock);
 	spin_lock_init(&ieee->reorder_spinlock);
-	//added by WB
 	atomic_set(&(ieee->atm_chnlop), 0);
 	atomic_set(&(ieee->atm_swbw), 0);
 
@@ -153,7 +151,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
  	ieee->privacy_invoked = 0;
  	ieee->ieee802_1x = 1;
 	ieee->raw_tx = 0;
-	//ieee->hwsec_support = 1; //default support hw security. //use module_param instead.
 	ieee->hwsec_active = 0; //disable hwsec, switch it on when necessary.
 
 	ieee80211_softmac_init(ieee);
@@ -196,8 +193,6 @@ void free_ieee80211(struct net_device *dev)
 {
 	struct ieee80211_device *ieee = netdev_priv(dev);
 	int i;
-	//struct list_head *p, *q;
-//	del_timer_sync(&ieee->SwBwTimer);
 #if 1
 	if (ieee->pHTInfo != NULL)
 	{
@@ -228,23 +223,6 @@ void free_ieee80211(struct net_device *dev)
 
 u32 ieee80211_debug_level = 0;
 static int debug = \
-	//		    IEEE80211_DL_INFO	|
-	//		    IEEE80211_DL_WX	|
-	//		    IEEE80211_DL_SCAN	|
-	//		    IEEE80211_DL_STATE	|
-	//		    IEEE80211_DL_MGMT	|
-	//		    IEEE80211_DL_FRAG	|
-	//		    IEEE80211_DL_EAP	|
-	//		    IEEE80211_DL_DROP	|
-	//		    IEEE80211_DL_TX	|
-	//		    IEEE80211_DL_RX	|
-			    //IEEE80211_DL_QOS    |
-	//		    IEEE80211_DL_HT 	|
-	//		    IEEE80211_DL_TS	|
-//			    IEEE80211_DL_BA 	|
-	//		    IEEE80211_DL_REORDER|
-//			    IEEE80211_DL_TRACE  |
-			    //IEEE80211_DL_DATA	|
 			    IEEE80211_DL_ERR	  //awayls open this flags to show error out
 			    ;
 struct proc_dir_entry *ieee80211_proc = NULL;
@@ -282,7 +260,7 @@ static int store_debug_level(struct file *file, const char *buffer,
 	return strnlen(buf, count);
 }
 
-int __init ieee80211_debug_init(void)
+int ieee80211_debug_init(void)
 {
 	struct proc_dir_entry *e;
 
@@ -308,7 +286,7 @@ int __init ieee80211_debug_init(void)
 	return 0;
 }
 
-void __exit ieee80211_debug_exit(void)
+void ieee80211_debug_exit(void)
 {
 	if (ieee80211_proc) {
 		remove_proc_entry("debug_level", ieee80211_proc);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_r8192s.h b/drivers/staging/rtl8192su/ieee80211/ieee80211_r8192s.h
index 1824cda790d..7e7fbb26980 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_r8192s.h
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_r8192s.h
@@ -339,28 +339,39 @@ enum {
 };
 
 /* Firmware related CMD IO. */
-typedef enum _FW_CMD_IO_TYPE {
-	FW_CMD_DIG_ENABLE = 0,		/* for DIG DM */
+typedef	enum _FW_CMD_IO_TYPE{
+	FW_CMD_DIG_ENABLE = 0, /* for DIG DM */
 	FW_CMD_DIG_DISABLE = 1,
 	FW_CMD_DIG_HALT = 2,
 	FW_CMD_DIG_RESUME = 3,
-	FW_CMD_HIGH_PWR_ENABLE = 4,	/* for High Power DM */
+	FW_CMD_HIGH_PWR_ENABLE = 4, /* for DIG DM */
 	FW_CMD_HIGH_PWR_DISABLE = 5,
-	FW_CMD_RA_RESET = 6,		/* for Rate adaptive DM */
-	FW_CMD_RA_ACTIVE = 7,
-	FW_CMD_RA_REFRESH_N = 8,
-	FW_CMD_RA_REFRESH_BG = 9,
-	FW_CMD_IQK_ENABLE = 10,		/* for FW supported IQK */
-	FW_CMD_TXPWR_TRACK_ENABLE = 11,	/* Tx power tracking switch */
-	FW_CMD_TXPWR_TRACK_DISABLE = 12,/* Tx power tracking switch */
-	FW_CMD_PAUSE_DM_BY_SCAN = 13,
-	FW_CMD_RESUME_DM_BY_SCAN = 14,
-	FW_CMD_MID_HIGH_PWR_ENABLE = 15,
+	FW_CMD_RA_RESET = 6, /* for DIG DM */
+	FW_CMD_RA_ACTIVE= 7,
+	FW_CMD_RA_REFRESH_N= 8,
+	FW_CMD_RA_REFRESH_BG= 9,
+	FW_CMD_RA_INIT= 10, /* for FW supported IQK */
+	FW_CMD_IQK_ENABLE = 11, /* Tx power tracking switch */
+	FW_CMD_TXPWR_TRACK_ENABLE = 12, /* Tx power tracking switch */
+	FW_CMD_TXPWR_TRACK_DISABLE = 13,
+	FW_CMD_TXPWR_TRACK_THERMAL = 14,
+	FW_CMD_PAUSE_DM_BY_SCAN = 15,
 	/* indicate firmware that driver enters LPS, for PS-Poll hardware bug */
-	FW_CMD_LPS_ENTER = 16,
+	FW_CMD_RESUME_DM_BY_SCAN = 16,
 	/* indicate firmware that driver leave LPS */
-	FW_CMD_LPS_LEAVE = 17,
-} FW_CMD_IO_TYPE;
+	FW_CMD_RA_REFRESH_N_COMB = 17,
+	FW_CMD_RA_REFRESH_BG_COMB = 18,
+	FW_CMD_ANTENNA_SW_ENABLE = 19,
+	FW_CMD_ANTENNA_SW_DISABLE = 20,
+	FW_CMD_TX_FEEDBACK_CCX_ENABLE = 21,
+	FW_CMD_LPS_ENTER = 22,
+	FW_CMD_LPS_LEAVE = 23,
+	FW_CMD_DIG_MODE_SS = 24,
+	FW_CMD_DIG_MODE_FA = 25,
+	FW_CMD_ADD_A2_ENTRY = 26,
+	FW_CMD_CTRL_DM_BY_DRIVER = 27,
+	FW_CMD_CTRL_DM_BY_DRIVER_NEW = 28,
+}FW_CMD_IO_TYPE,*PFW_CMD_IO_TYPE;
 
 #define RT_MAX_LD_SLOT_NUM	10
 struct rt_link_detect {
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
index 1f2bc7ac6f7..09a02f7e39f 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
@@ -360,7 +360,7 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device* ieee, struct sk_buff *s
 	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
 
 	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
+	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv,ieee);
 	atomic_dec(&crypt->refcnt);
 	if (res < 0) {
 		printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
index 4f1f2f08b2d..02850479dd6 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c
@@ -160,7 +160,6 @@ void enqueue_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb)
 	ieee->mgmt_queue_head = nh;
 	ieee->mgmt_queue_ring[nh] = skb;
 
-	//return 0;
 }
 
 struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee)
@@ -183,19 +182,53 @@ void init_mgmt_queue(struct ieee80211_device *ieee)
 	ieee->mgmt_queue_tail = ieee->mgmt_queue_head = 0;
 }
 
+u8
+MgntQuery_TxRateExcludeCCKRates(struct ieee80211_device *ieee)
+{
+	u16	i;
+	u8	QueryRate = 0;
+	u8	BasicRate;
+
+
+	for( i = 0; i < ieee->current_network.rates_len; i++)
+	{
+		BasicRate = ieee->current_network.rates[i]&0x7F;
+		if(!ieee80211_is_cck_rate(BasicRate))
+		{
+			if(QueryRate == 0)
+			{
+				QueryRate = BasicRate;
+			}
+			else
+			{
+				if(BasicRate < QueryRate)
+				{
+					QueryRate = BasicRate;
+				}
+			}
+		}
+	}
+
+	if(QueryRate == 0)
+	{
+		QueryRate = 12;
+		printk("No BasicRate found!!\n");
+	}
+	return QueryRate;
+}
 u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
 {
 	PRT_HIGH_THROUGHPUT      pHTInfo = ieee->pHTInfo;
 	u8 rate;
 
-	// 2008/01/25 MH For broadcom, MGNT frame set as OFDM 6M.
-	if(pHTInfo->IOTAction & HT_IOT_ACT_MGNT_USE_CCK_6M)
-		rate = 0x0c;
+	if(pHTInfo->IOTAction & HT_IOT_ACT_WA_IOT_Broadcom)
+	{
+		rate = MgntQuery_TxRateExcludeCCKRates(ieee);
+	}
 	else
 		rate = ieee->basic_rate & 0x7f;
 
 	if(rate == 0){
-		// 2005.01.26, by rcnjko.
 		if(ieee->mode == IEEE_A||
 		   ieee->mode== IEEE_N_5G||
 		   (ieee->mode== IEEE_N_24G&&!pHTInfo->bCurSuppCCK))
@@ -203,17 +236,6 @@ u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
 		else
 			rate = 0x02;
 	}
-
-	/*
-	// Data rate of ProbeReq is already decided. Annie, 2005-03-31
-	if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
-	{
-	if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
-	rate = 0x0c;
-	else
-	rate = 0x02;
-	}
-	 */
 	return rate;
 }
 
@@ -251,9 +273,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
 				ieee->seq_ctrl[0]++;
 
 			/* avoid watchdog triggers */
-	//		ieee->dev->trans_start = jiffies;
 			ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
-			//dev_kfree_skb_any(skb);//edit by thomas
 		}
 
 		spin_unlock_irqrestore(&ieee->lock, flags);
@@ -279,9 +299,7 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
 			printk("%s():insert to waitqueue!\n",__FUNCTION__);
 			skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
 		} else {
-			//printk("TX packet!\n");
 			ieee->softmac_hard_start_xmit(skb,ieee->dev);
-			//dev_kfree_skb_any(skb);//edit by thomas
 		}
 		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags);
 	}
@@ -293,16 +311,24 @@ inline void softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *i
 	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
 	struct ieee80211_hdr_3addr  *header =
 		(struct ieee80211_hdr_3addr  *) skb->data;
+	u16 fc,type,stype;
         cb_desc *tcb_desc = (cb_desc *)(skb->cb + 8);
 
+	fc = header->frame_control;
+	type = WLAN_FC_GET_TYPE(fc);
+	stype = WLAN_FC_GET_STYPE(fc);
+
+
+	if(stype != IEEE80211_STYPE_PSPOLL)
 	tcb_desc->queue_index = MGNT_QUEUE;
+	else
+		tcb_desc->queue_index = HIGH_QUEUE;
 	tcb_desc->data_rate = MgntQuery_MgntFrameTxRate(ieee);
 	tcb_desc->RATRIndex = 7;
 	tcb_desc->bTxDisableRateFallBack = 1;
 	tcb_desc->bTxUseDriverAssingedRate = 1;
-	//printk("=============>%s()\n", __FUNCTION__);
 	if(single){
-
+		if(!(type == IEEE80211_FTYPE_CTL)) {
 		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
 
 		if (ieee->seq_ctrl[0] == 0xFFF)
@@ -310,12 +336,12 @@ inline void softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *i
 		else
 			ieee->seq_ctrl[0]++;
 
+		}
 		/* avoid watchdog triggers */
-	//	ieee->dev->trans_start = jiffies;
 		ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
 
 	}else{
-
+		if(!(type == IEEE80211_FTYPE_CTL)) {
 		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
 
 		if (ieee->seq_ctrl[0] == 0xFFF)
@@ -323,10 +349,10 @@ inline void softmac_ps_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *i
 		else
 			ieee->seq_ctrl[0]++;
 
+		}
 		ieee->softmac_hard_start_xmit(skb,ieee->dev);
 
 	}
-	//dev_kfree_skb_any(skb);//edit by thomas
 }
 
 inline struct sk_buff *ieee80211_probe_req(struct ieee80211_device *ieee)
@@ -373,24 +399,16 @@ void ieee80211_send_beacon(struct ieee80211_device *ieee)
 	struct sk_buff *skb;
 	if(!ieee->ieee_up)
 		return;
-	//unsigned long flags;
 	skb = ieee80211_get_beacon_(ieee);
 
 	if (skb){
 		softmac_mgmt_xmit(skb, ieee);
 		ieee->softmac_stats.tx_beacons++;
-		//dev_kfree_skb_any(skb);//edit by thomas
 	}
-//	ieee->beacon_timer.expires = jiffies +
-//		(MSECS( ieee->current_network.beacon_interval -5));
 
-	//spin_lock_irqsave(&ieee->beacon_lock,flags);
 	if(ieee->beacon_txing && ieee->ieee_up){
-//		if(!timer_pending(&ieee->beacon_timer))
-//			add_timer(&ieee->beacon_timer);
 		mod_timer(&ieee->beacon_timer,jiffies+(MSECS(ieee->current_network.beacon_interval-5)));
 	}
-	//spin_unlock_irqrestore(&ieee->beacon_lock,flags);
 }
 
 
@@ -414,7 +432,6 @@ void ieee80211_send_probe(struct ieee80211_device *ieee)
 	if (skb){
 		softmac_mgmt_xmit(skb, ieee);
 		ieee->softmac_stats.tx_probe_rq++;
-		//dev_kfree_skb_any(skb);//edit by thomas
 	}
 }
 
@@ -585,12 +602,8 @@ void ieee80211_start_send_beacons(struct ieee80211_device *ieee)
 
 void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
 {
-//	unsigned long flags;
-
-	//ieee->sync_scan_hurryup = 1;
 
 	down(&ieee->scan_sem);
-//	spin_lock_irqsave(&ieee->lock, flags);
 	ieee->scan_watch_dog = 0;
 	if (ieee->scanning == 1){
 		ieee->scanning = 0;
@@ -598,7 +611,6 @@ void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
 		cancel_delayed_work(&ieee->softmac_scan_wq);
 	}
 
-//	spin_unlock_irqrestore(&ieee->lock, flags);
 	up(&ieee->scan_sem);
 }
 
@@ -672,7 +684,6 @@ inline struct sk_buff *ieee80211_authentication_req(struct ieee80211_network *be
 	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
 	memcpy(auth->header.addr3, beacon->bssid, ETH_ALEN);
 
-	//auth->algorithm = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
 	if(ieee->auth_mode == 0)
 		auth->algorithm = WLAN_AUTH_OPEN;
 	else if(ieee->auth_mode == 1)
@@ -689,6 +700,26 @@ inline struct sk_buff *ieee80211_authentication_req(struct ieee80211_network *be
 
 }
 
+void constructWMMIE(u8* wmmie, u8* wmm_len,u8 oui_subtype)
+{
+	u8	szQoSOUI[] ={221, 0, 0x00, 0x50, 0xf2, 0x02, 0, 1};
+
+	if (oui_subtype == OUI_SUBTYPE_QOS_CAPABI)
+	{
+		szQoSOUI[0] = 46;
+		szQoSOUI[1] = *wmm_len;
+		memcpy(wmmie,szQoSOUI,3);
+		*wmm_len = 3;
+	}
+	else
+	{
+		szQoSOUI[1] = *wmm_len + 6;
+		szQoSOUI[6] = oui_subtype;
+		memcpy(wmmie, szQoSOUI, 8);
+		*(wmmie+8) = 0;
+		*wmm_len = 9;
+	}
+}
 
 static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *dest)
 {
@@ -707,14 +738,18 @@ static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
 	int wpa_ie_len = ieee->wpa_ie_len;
 	u8 erpinfo_content = 0;
 
-	u8* tmp_ht_cap_buf;
+	u8* tmp_ht_cap_buf=NULL;
 	u8 tmp_ht_cap_len=0;
-	u8* tmp_ht_info_buf;
+	u8* tmp_ht_info_buf=NULL;
 	u8 tmp_ht_info_len=0;
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 	u8* tmp_generic_ie_buf=NULL;
 	u8 tmp_generic_ie_len=0;
 
+
+	u8 wmmie[9] = {0};
+	u8 wmm_len = 0;
+
 	if(rate_ex_len > 0) rate_ex_len+=2;
 
 	if(ieee->current_network.capability & WLAN_CAPABILITY_IBSS)
@@ -722,7 +757,7 @@ static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
 	else
 		atim_len = 0;
 
-#if 1
+#if 0
 	if(ieee80211_is_54g(ieee->current_network))
 		erp_len = 3;
 	else
@@ -747,22 +782,35 @@ static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
 		((0 == strcmp(crypt->ops->name, "WEP") || wpa_ie_len));
 	//HT ralated element
 #if 1
-	tmp_ht_cap_buf =(u8*) &(ieee->pHTInfo->SelfHTCap);
-	tmp_ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
-	tmp_ht_info_buf =(u8*) &(ieee->pHTInfo->SelfHTInfo);
-	tmp_ht_info_len = sizeof(ieee->pHTInfo->SelfHTInfo);
-	HTConstructCapabilityElement(ieee, tmp_ht_cap_buf, &tmp_ht_cap_len,encrypt);
-	HTConstructInfoElement(ieee,tmp_ht_info_buf,&tmp_ht_info_len, encrypt);
-
-
-        if(pHTInfo->bRegRT2RTAggregation)
-        {
-        	tmp_generic_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
-		tmp_generic_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
-		HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
-        }
-//	printk("===============>tmp_ht_cap_len is %d,tmp_ht_info_len is %d, tmp_generic_ie_len is %d\n",tmp_ht_cap_len,tmp_ht_info_len,tmp_generic_ie_len);
+	if(ieee->pHTInfo->bCurrentHTSupport){
+		tmp_ht_cap_buf =(u8*) &(ieee->pHTInfo->SelfHTCap);
+		tmp_ht_cap_len = sizeof(ieee->pHTInfo->SelfHTCap);
+		tmp_ht_info_buf =(u8*) &(ieee->pHTInfo->SelfHTInfo);
+		tmp_ht_info_len = sizeof(ieee->pHTInfo->SelfHTInfo);
+
+		HTConstructCapabilityElement(ieee, tmp_ht_cap_buf, &tmp_ht_cap_len,encrypt);
+
+		HTConstructInfoElement(ieee,tmp_ht_info_buf,&tmp_ht_info_len, encrypt);
+
+
+		if(pHTInfo->bRegRT2RTAggregation)
+		{
+			tmp_generic_ie_buf = ieee->pHTInfo->szRT2RTAggBuffer;
+			tmp_generic_ie_len = sizeof(ieee->pHTInfo->szRT2RTAggBuffer);
+			HTConstructRT2RTAggElement(ieee, tmp_generic_ie_buf, &tmp_generic_ie_len);
+		}
+	}
 #endif
+
+	if(ieee->qos_support){
+
+		if(ieee->iw_mode == IW_MODE_ADHOC)
+		{
+			wmm_len = 1;
+			constructWMMIE(wmmie,&wmm_len,OUI_SUBTYPE_WMM_INFO);
+		}
+	}
+
 	beacon_size = sizeof(struct ieee80211_probe_response)+2+
 		ssid_len
 		+3 //channel
@@ -825,7 +873,6 @@ static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
 	u16 val16;
 		*(tag++) = MFIE_TYPE_IBSS_SET;
 		*(tag++) = 2;
-		//*((u16*)(tag)) = cpu_to_le16(ieee->current_network.atim_window);
 		 val16 = cpu_to_le16(ieee->current_network.atim_window);
 		memcpy((u8 *)tag, (u8 *)&val16, 2);
 		tag+=2;
@@ -854,7 +901,6 @@ static struct sk_buff* ieee80211_probe_resp(struct ieee80211_device *ieee, u8 *d
 		tag += wpa_ie_len;
 	}
 
-	//skb->dev = ieee->dev;
 	return skb;
 }
 
@@ -996,19 +1042,39 @@ void ieee80211_resp_to_probe(struct ieee80211_device *ieee, u8 *dest)
 }
 
 
+inline int SecIsInPMKIDList(struct ieee80211_device *ieee, u8 *bssid)
+{
+	int i = 0;
+
+	do
+	{
+		if ((ieee->PMKIDList[i].bUsed) && (memcmp(ieee->PMKIDList[i].Bssid, bssid, ETH_ALEN) == 0))
+		{
+			break;
+		}
+		else
+		{
+			i++;
+		}
+	} while (i < NUM_PMKID_CACHE);
+
+	if (i == NUM_PMKID_CACHE)
+	{
+		i = -1;
+	}
+	else
+	{
+	}
+
+	return (i);
+
+}
 inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beacon,struct ieee80211_device *ieee)
 {
 	struct sk_buff *skb;
-	//unsigned long flags;
 
 	struct ieee80211_assoc_request_frame *hdr;
 	u8 *tag;//,*rsn_ie;
-	//short info_addr = 0;
-	//int i;
-	//u16 suite_count = 0;
-	//u8 suit_select = 0;
-	//unsigned int wpa_len = beacon->wpa_ie_len;
-	//for HT
 	u8* ht_cap_buf = NULL;
 	u8 ht_cap_len=0;
 	u8* realtek_ie_buf=NULL;
@@ -1019,6 +1085,7 @@ inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beaco
 	unsigned int cxvernum_ie_len=0;
 	struct ieee80211_crypt_data* crypt;
 	int encrypt;
+	int	PMKCacheIdx;
 
 	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
 	unsigned int wmm_info_len = beacon->qos_data.supported?9:0;
@@ -1060,6 +1127,14 @@ inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beaco
 	{
 		cxvernum_ie_len = 5+2;
 	}
+
+	PMKCacheIdx = SecIsInPMKIDList(ieee, ieee->current_network.bssid);
+	if (PMKCacheIdx >= 0)
+	{
+		wpa_ie_len += 18;
+		printk("[PMK cache]: WPA2 IE length: %x\n", wpa_ie_len);
+	}
+
 	len = sizeof(struct ieee80211_assoc_request_frame)+ 2
 		+ beacon->ssid_len//essid tagged val
 		+ rate_len//rates tagged val
@@ -1187,6 +1262,13 @@ inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beaco
 	tag = skb_put(skb, wpa_ie_len);
 	if (wpa_ie_len){
 		memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
+		if (PMKCacheIdx >= 0)
+		{
+			tag = skb_put(skb, 18);
+			*tag = 1;
+			*(tag + 1) = 0;
+			memcpy((tag + 2), &ieee->PMKIDList[PMKCacheIdx].PMKID, 16);
+		}
 	}
 
 	tag = skb_put(skb,wmm_info_len);
@@ -1215,8 +1297,6 @@ inline struct sk_buff *ieee80211_association_req(struct ieee80211_network *beaco
 			memcpy(tag, realtek_ie_buf,realtek_ie_len -2 );
 		}
 	}
-//	printk("<=====%s(), %p, %p\n", __FUNCTION__, ieee->dev, ieee->dev->dev_addr);
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
 	return skb;
 }
 
@@ -1271,7 +1351,6 @@ void ieee80211_associate_step1(struct ieee80211_device *ieee)
 	else{
 		ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING ;
 		IEEE80211_DEBUG_MGMT("Sending authentication request\n");
-		//printk(KERN_WARNING "Sending authentication request\n");
 		softmac_mgmt_xmit(skb, ieee);
 		//BUGON when you try to add_timer twice, using mod_timer may be better, john0709
 		if(!timer_pending(&ieee->associate_timer)){
@@ -1287,7 +1366,6 @@ void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge,
 	u8 *c;
 	struct sk_buff *skb;
 	struct ieee80211_network *beacon = &ieee->current_network;
-//	int hlen = sizeof(struct ieee80211_authentication);
 
 	ieee->associate_seq++;
 	ieee->softmac_stats.tx_auth_rq++;
@@ -1307,7 +1385,6 @@ void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge,
 
 		softmac_mgmt_xmit(skb, ieee);
 		mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-		//dev_kfree_skb_any(skb);//edit by thomas
 	}
 	kfree(challenge);
 }
@@ -1328,7 +1405,6 @@ void ieee80211_associate_step2(struct ieee80211_device *ieee)
 	else{
 		softmac_mgmt_xmit(skb, ieee);
 		mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-		//dev_kfree_skb_any(skb);//edit by thomas
 	}
 }
 
@@ -1356,7 +1432,6 @@ void ieee80211_associate_complete_wq(struct work_struct *work)
 	{
 		printk("Successfully associated, ht not enabled(%d, %d)\n", ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bEnableHT);
 		memset(ieee->dot11HTOperationalRateSet, 0, 16);
-		//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 	}
 	ieee->LinkDetectInfo.SlotNum = 2 * (1 + ieee->current_network.beacon_interval/500);
 	// To prevent the immediately calling watch_dog after association.
@@ -1388,7 +1463,6 @@ void ieee80211_associate_complete(struct ieee80211_device *ieee)
 	del_timer_sync(&ieee->associate_timer);
 
 	ieee->state = IEEE80211_LINKED;
-	//ieee->UpdateHalRATRTableHandler(dev, ieee->dot11HTOperationalRateSet);
 	queue_work(ieee->wq, &ieee->associate_complete_wq);
 }
 
@@ -1404,9 +1478,14 @@ void ieee80211_associate_procedure_wq(struct work_struct *work)
 
 	ieee80211_stop_scan(ieee);
 	printk("===>%s(), chan:%d\n", __FUNCTION__, ieee->current_network.channel);
-	//ieee->set_chan(ieee->dev, ieee->current_network.channel);
 	HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 
+	if(ieee->eRFPowerState == eRfOff)
+	{
+            printk("=============>%s():Rf state is eRfOff, schedule ipsleave wq again,return\n",__FUNCTION__);
+		up(&ieee->wx_sem);
+		return;
+	}
 	ieee->associate_seq = 1;
 	ieee80211_associate_step1(ieee);
 
@@ -1432,14 +1511,16 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 	if ((ieee->iw_mode == IW_MODE_ADHOC) && !(net->capability & WLAN_CAPABILITY_IBSS))
 		return;
 
+	if ((ieee->iw_mode == IW_MODE_ADHOC) && (net->channel > ieee->ibss_maxjoin_chal))
+		return;
 
 	if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC){
 		/* if the user specified the AP MAC, we need also the essid
 		 * This could be obtained by beacons or, if the network does not
 		 * broadcast it, it can be put manually.
 		 */
-		apset = ieee->wap_set;//(memcmp(ieee->current_network.bssid, zero,ETH_ALEN)!=0 );
-		ssidset = ieee->ssid_set;//ieee->current_network.ssid[0] != '\0';
+		apset = ieee->wap_set;
+		ssidset = ieee->ssid_set;
 		ssidbroad =  !(net->ssid_len == 0 || net->ssid[0]== '\0');
 		apmatch = (memcmp(ieee->current_network.bssid, net->bssid, ETH_ALEN)==0);
 		ssidmatch = (ieee->current_network.ssid_len == net->ssid_len)&&\
@@ -1480,7 +1561,6 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 					ieee->AsocRetryCount = 0;
 					//for HT by amy 080514
 					if((ieee->current_network.qos_data.supported == 1) &&
-					  // (ieee->pHTInfo->bEnableHT && ieee->current_network.bssht.bdSupportHT))
 					   ieee->current_network.bssht.bdSupportHT)
 /*WB, 2008.09.09:bCurrentHTSupport and bEnableHT two flags are going to put together to check whether we are in HT now, so needn't to check bEnableHT flags here. That's is to say we will set to HT support whenever joined AP has the ability to support HT. And whether we are in HT or not, please check bCurrentHTSupport&&bEnableHT now please.*/
 					{
@@ -1508,7 +1588,6 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 						printk(KERN_INFO"Using B rates\n");
 					}
 					memset(ieee->dot11HTOperationalRateSet, 0, 16);
-					//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 					ieee->state = IEEE80211_LINKED;
 				}
 
@@ -1598,6 +1677,16 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
 	if (skb->len < sizeof (struct ieee80211_hdr_3addr  ))
 		return -1; /* corrupted */
 
+        if((memcmp(header->addr3,ieee->current_network.bssid,ETH_ALEN) != 0)&&
+                (memcmp(header->addr3,"\xff\xff\xff\xff\xff\xff",ETH_ALEN) != 0)) {
+            return -1;
+        }
+
+        if(memcmp(header->addr3,ieee->current_network.bssid,ETH_ALEN) == 0) {
+        }
+
+        if(memcmp(header->addr3,"\xff\xff\xff\xff\xff\xff",ETH_ALEN) == 0) {
+        }
 	memcpy(src,header->addr2, ETH_ALEN);
 
 	skbend = (u8*)skb->data + skb->len;
@@ -1615,7 +1704,6 @@ static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
 		tag++; /* point to the next tag */
 	}
 
-	//IEEE80211DMESG("Card MAC address is "MACSTR, MAC2STR(src));
 	if (ssidlen == 0) return 1;
 
 	if (!ssid) return 1; /* ssid not found in tagged param */
@@ -1673,11 +1761,8 @@ ieee80211_rx_probe_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
 {
 	u8 dest[ETH_ALEN];
 
-	//IEEE80211DMESG("Rx probe");
 	ieee->softmac_stats.rx_probe_rq++;
-	//DMESG("Dest is "MACSTR, MAC2STR(dest));
 	if (probe_rq_parse(ieee, skb, dest)){
-		//IEEE80211DMESG("Was for me!");
 		ieee->softmac_stats.tx_probe_rs++;
 		ieee80211_resp_to_probe(ieee, dest);
 	}
@@ -1688,14 +1773,12 @@ ieee80211_rx_auth_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
 {
 	u8 dest[ETH_ALEN];
 	int status;
-	//IEEE80211DMESG("Rx probe");
 	ieee->softmac_stats.rx_auth_rq++;
 
 	status = auth_rq_parse(skb, dest);
 	if (status != -1) {
 		ieee80211_resp_to_auth(ieee, status, dest);
 	}
-	//DMESG("Dest is "MACSTR, MAC2STR(dest));
 
 }
 
@@ -1704,7 +1787,6 @@ ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
 {
 
 	u8 dest[ETH_ALEN];
-	//unsigned long flags;
 
 	ieee->softmac_stats.rx_ass_rq++;
 	if (assoc_rq_parse(skb,dest) != -1){
@@ -1739,7 +1821,6 @@ short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *ti
 		return 0;
 	*/
 	dtim = ieee->current_network.dtim_data;
-	//printk("DTIM\n");
 	if(!(dtim & IEEE80211_DTIM_VALID))
 		return 0;
 	timeout = ieee->current_network.beacon_interval; //should we use ps_timeout value or beacon_interval
@@ -1762,7 +1843,6 @@ short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h, u32 *ti
 	if(time_l){
 		*time_l = ieee->current_network.last_dtim_sta_time[0]
 			+ (ieee->current_network.beacon_interval);
-		//	* ieee->current_network.dtim_period) * 1000;
 	}
 
 	if(time_h){
@@ -1790,7 +1870,6 @@ inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
 		ieee->iw_mode != IW_MODE_INFRA ||
 		ieee->state != IEEE80211_LINKED)){
 
-	//	#warning CHECK_LOCK_HERE
 		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
 
 		ieee80211_sta_wakeup(ieee, 1);
@@ -1809,7 +1888,6 @@ inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
 			ieee->enter_sleep_state(ieee->dev,th,tl);
 
 		else if(ieee->sta_sleep == 0){
-		//	printk("send null 1\n");
 			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
 
 			if(ieee->ps_is_queue_empty(ieee->dev)){
@@ -1918,8 +1996,6 @@ void ieee80211_process_action(struct ieee80211_device* ieee, struct sk_buff* skb
 			ieee80211_rx_DELBA(ieee, skb);
 			break;
 		default:
-//			if (net_ratelimit())
-//			IEEE80211_DEBUG(IEEE80211_DL_BA, "unknown action frame(%d)\n", tmp);
 			break;
 	}
 	return;
@@ -1936,7 +2012,6 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 	int chlen=0;
 	int aid;
 	struct ieee80211_assoc_response_frame *assoc_resp;
-//	struct ieee80211_info_element *info_element;
 	bool bSupportNmode = true, bHalfSupportNmode = false; //default support N mode, disable halfNmode
 
 	if(!ieee->proto_started)
@@ -2095,8 +2170,6 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 				ieee->softmac_stats.reassoc++;
 				ieee->is_roaming = true;
 				ieee80211_disassociate(ieee);
-			//	notify_wx_assoc_event(ieee);
-				//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
 				RemovePeerTS(ieee, header->addr2);
 				if(ieee->LedControlHandler != NULL)
 				        ieee->LedControlHandler(ieee->dev, LED_CTL_START_TO_LINK); //added by amy for LED 090318
@@ -2111,7 +2184,6 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 			break;
 	}
 
-	//dev_kfree_skb_any(skb);
 	return 0;
 }
 
@@ -2163,22 +2235,16 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
 			/* as for the completion function, it does not need
 			 * to check it any more.
 			 * */
-			//printk("error:no descriptor left@queue_index %d, %d, %d\n", queue_index, skb_queue_len(&ieee->skb_waitQ[queue_index]), ieee->check_nic_enough_desc(ieee->dev,queue_index));
-			//ieee80211_rtl_stop_queue(ieee);
 			skb_queue_tail(&ieee->skb_waitQ[queue_index], txb->fragments[i]);
 		}else{
 			ieee->softmac_data_hard_start_xmit(
 					txb->fragments[i],
 					ieee->dev,ieee->rate);
-			//ieee->stats.tx_packets++;
-			//ieee->stats.tx_bytes += txb->fragments[i]->len;
-			//ieee->dev->trans_start = jiffies;
 		}
 	}
 #endif
 	ieee80211_txb_free(txb);
 
-//exit:
 	spin_unlock_irqrestore(&ieee->lock,flags);
 
 }
@@ -2197,9 +2263,7 @@ void ieee80211_resume_tx(struct ieee80211_device *ieee)
 			ieee->softmac_data_hard_start_xmit(
 				ieee->tx_pending.txb->fragments[i],
 				ieee->dev,ieee->rate);
-				//(i+1)<ieee->tx_pending.txb->nr_frags);
 			ieee->stats.tx_packets++;
-		//	ieee->dev->trans_start = jiffies;
 		}
 	}
 
@@ -2249,7 +2313,6 @@ void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee)
 				ieee->seq_ctrl[0]++;
 
 			ieee->softmac_data_hard_start_xmit(skb,ieee->dev,ieee->basic_rate);
-			//dev_kfree_skb_any(skb);//edit by thomas
 		}
 	}
 	if (!ieee->queue_stop && ieee->tx_pending.txb)
@@ -2267,15 +2330,12 @@ exit :
 
 void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee)
 {
-	//unsigned long flags;
-	//spin_lock_irqsave(&ieee->lock,flags);
 
 	if (! netif_queue_stopped(ieee->dev)){
 		netif_stop_queue(ieee->dev);
 		ieee->softmac_stats.swtxstop++;
 	}
 	ieee->queue_stop = 1;
-	//spin_unlock_irqrestore(&ieee->lock,flags);
 
 }
 
@@ -2362,7 +2422,7 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
 
 //	if((IS_DOT11D_ENABLE(ieee)) && (ieee->state == IEEE80211_NOLINK))
 	if (ieee->state == IEEE80211_NOLINK)
-		ieee->current_network.channel = 6;
+		ieee->current_network.channel = ieee->IbssStartChnl;
 	/* if not then the state is not linked. Maybe the user swithced to
 	 * ad-hoc mode just after being in monitor mode, or just after
 	 * being very few time in managed mode (so the card have had no
@@ -2509,11 +2569,9 @@ void ieee80211_disassociate(struct ieee80211_device *ieee)
 	ieee->state = IEEE80211_NOLINK;
 	ieee->is_set_key = false;
 
-	//LZM for usb dev crash.
-	//ieee->link_change(ieee->dev);
 	queue_delayed_work(ieee->wq, &ieee->link_change_wq, 0);
 
-	//HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+
 	notify_wx_assoc_event(ieee);
 
 }
@@ -2657,8 +2715,6 @@ void ieee80211_start_protocol(struct ieee80211_device *ieee)
 
 	if (ieee->current_network.beacon_interval == 0)
 		ieee->current_network.beacon_interval = 100;
-//	printk("===>%s(), chan:%d\n", __FUNCTION__, ieee->current_network.channel);
-//	ieee->set_chan(ieee->dev,ieee->current_network.channel);
 
        	for(i = 0; i < 17; i++) {
 	  ieee->last_rxseq_num[i] = -1;
@@ -2721,7 +2777,6 @@ void ieee80211_softmac_init(struct ieee80211_device *ieee)
 	ieee->Regdot11HTOperationalRateSet[0]= 0xff;//support MCS 0~7
 	ieee->Regdot11HTOperationalRateSet[1]= 0xff;//support MCS 8~15
 	ieee->Regdot11HTOperationalRateSet[4]= 0x01;
-	//added by amy
 	ieee->actscanning = false;
 	ieee->beinretry = false;
 	ieee->is_set_key = false;
@@ -2891,8 +2946,6 @@ static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value)
 
 	if (ieee->set_security)
 		ieee->set_security(ieee->dev, &sec);
-	//else
-	//	ret = -EOPNOTSUPP;
 
 	return ret;
 }
@@ -3173,7 +3226,6 @@ int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_poin
 	int ret=0;
 
 	down(&ieee->wx_sem);
-	//IEEE_DEBUG_INFO("wpa_supplicant: len=%d\n", p->length);
 
 	if (p->length < sizeof(struct ieee_param) || !p->pointer){
 		ret = -EINVAL;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
index 484c3aba5cb..a6a5d68df3a 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_tx.c
@@ -32,7 +32,6 @@
 ******************************************************************************/
 
 #include <linux/compiler.h>
-//#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/if_arp.h>
 #include <linux/in6.h>
@@ -208,7 +207,6 @@ int ieee80211_encrypt_fragment(
 	/* To encrypt, frame format is:
 	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
 
-	// PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
 	/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
 	 * call both MSDU and MPDU encryption functions from here. */
 	atomic_inc(&crypt->refcnt);
@@ -231,7 +229,6 @@ int ieee80211_encrypt_fragment(
 
 
 void ieee80211_txb_free(struct ieee80211_txb *txb) {
-	//int i;
 	if (unlikely(!txb))
 		return;
 	kfree(txb);
@@ -280,7 +277,6 @@ ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network)
 	if (eth->h_proto != htons(ETH_P_IP))
 		return 0;
 
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
 	ip = ip_hdr(skb);
 
 	switch (ip->tos & 0xfc) {
@@ -681,10 +677,8 @@ int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (encrypt)
 			fc = IEEE80211_FTYPE_DATA | IEEE80211_FCTL_WEP;
 		else
-
                         fc = IEEE80211_FTYPE_DATA;
 
-		//if(ieee->current_network.QoS_Enable)
 		if(qos_actived)
 			fc |= IEEE80211_STYPE_QOS_DATA;
 		else
@@ -765,7 +759,6 @@ int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 		txb->encrypted = encrypt;
 		txb->payload_size = bytes;
 
-		//if (ieee->current_network.QoS_Enable)
 		if(qos_actived)
 		{
 			txb->queue_index = UP2AC(skb->priority);
@@ -812,7 +805,6 @@ int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 				/* The last fragment takes the remaining length */
 				bytes = bytes_last_frag;
 			}
-			//if(ieee->current_network.QoS_Enable)
 			if(qos_actived)
 			{
 				// add 1 only indicate to corresponding seq number control 2006/7/12
@@ -889,7 +881,6 @@ int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 		if ( tcb_desc->bMulticast ||  tcb_desc->bBroadcast)
 			tcb_desc->data_rate = ieee->basic_rate;
 		else
-			//tcb_desc->data_rate = CURRENT_RATE(ieee->current_network.mode, ieee->rate, ieee->HTCurrentOperaRate);
 			tcb_desc->data_rate = CURRENT_RATE(ieee->mode, ieee->rate, ieee->HTCurrentOperaRate);
 		ieee80211_qurey_ShortPreambleMode(ieee, tcb_desc);
 		ieee80211_tx_query_agg_cap(ieee, txb->fragments[0], tcb_desc);
@@ -897,8 +888,6 @@ int rtl8192_ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
 		ieee80211_query_BandwidthMode(ieee, tcb_desc);
 		ieee80211_query_protectionmode(ieee, tcb_desc, txb->fragments[0]);
 		ieee80211_query_seqnum(ieee, txb->fragments[0], header.addr1);
-//		IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, txb->fragments[0]->data, txb->fragments[0]->len);
-		//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, tcb_desc, sizeof(cb_desc));
 #endif
 	}
 	spin_unlock_irqrestore(&ieee->lock, flags);
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
index 2ce5bd543ea..984a3608561 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c
@@ -77,7 +77,6 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	/* Add the ESSID */
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
-//	if (network->flags & NETWORK_EMPTY_ESSID) {
 	if (network->ssid_len == 0) {
 		iwe.u.data.length = sizeof("<hidden>");
                 start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
@@ -240,9 +239,7 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
 	unsigned long flags;
 
 	char *ev = extra;
-//	char *stop = ev + IW_SCAN_MAX_DATA;
 	char *stop = ev + wrqu->data.length;//IW_SCAN_MAX_DATA;
-	//char *stop = ev + IW_SCAN_MAX_DATA;
 	int i = 0;
 	int err = 0;
 	IEEE80211_DEBUG_WX("Getting scan\n");
@@ -511,7 +508,6 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         struct ieee80211_security sec = {
                 .flags = 0,
         };
-	//printk("======>encoding flag:%x,ext flag:%x, ext alg:%d\n", encoding->flags,ext->ext_flags, ext->alg);
         idx = encoding->flags & IW_ENCODE_INDEX;
         if (idx) {
                 if (idx < 1 || idx > WEP_KEYS)
@@ -562,7 +558,6 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         }
 
 	sec.enabled = 1;
-    //    sec.encrypt = 1;
 
         switch (ext->alg) {
         case IW_ENCODE_ALG_WEP:
@@ -580,7 +575,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                 ret = -EINVAL;
                 goto done;
         }
-	printk("alg name:%s\n",alg);
+	IEEE80211_DEBUG_WX("alg name: %s\n", alg);
 
 	 ops = ieee80211_get_crypto_ops(alg);
         if (ops == NULL)
@@ -624,8 +619,6 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
                 goto done;
         }
 #if 1
- //skip_host_crypt:
-	//printk("skip_host_crypt:ext_flags:%x\n", ext->ext_flags);
         if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
                 ieee->tx_keyidx = idx;
                 sec.active_key = idx;
@@ -633,7 +626,6 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
         }
 
         if (ext->alg != IW_ENCODE_ALG_NONE) {
-                //memcpy(sec.keys[idx], ext->key, ext->key_len);
                 sec.key_sizes[idx] = ext->key_len;
                 sec.flags |= (1 << idx);
                 if (ext->alg == IW_ENCODE_ALG_WEP) {
@@ -690,7 +682,6 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
 	switch (data->flags & IW_AUTH_INDEX) {
         case IW_AUTH_WPA_VERSION:
 	     /*need to support wpa2 here*/
-		//printk("wpa version:%x\n", data->value);
 		break;
         case IW_AUTH_CIPHER_PAIRWISE:
         case IW_AUTH_CIPHER_GROUP:
@@ -708,8 +699,6 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
 		break;
 
 	case IW_AUTH_80211_AUTH_ALG:
-		//printk("======>%s():data->value is %d\n",__FUNCTION__,data->value);
-	//	ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM)?1:0;
 		if(data->value & IW_AUTH_ALG_SHARED_KEY){
 			ieee->open_wep = 0;
 			ieee->auth_mode = 1;
@@ -721,17 +710,14 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
 		else if(data->value & IW_AUTH_ALG_LEAP){
 			ieee->open_wep = 1;
 			ieee->auth_mode = 2;
-			//printk("hahahaa:LEAP\n");
 		}
 		else
 			return -EINVAL;
-		//printk("open_wep:%d\n", ieee->open_wep);
 		break;
 
 #if 1
 	case IW_AUTH_WPA_ENABLED:
 		ieee->wpa_enabled = (data->value)?1:0;
-		//printk("enable wpa:%d\n", ieee->wpa_enabled);
 		break;
 
 #endif
@@ -755,7 +741,6 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
 
 	if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
 	{
-	//	printk("return error out, len:%d\n", len);
 	return -EINVAL;
 	}
 
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h
index 8ddc8bf9dc2..1c2a40b75a1 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_BA.h
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef _BATYPE_H_
 #define _BATYPE_H_
 
@@ -18,14 +36,7 @@
 #define	DELBA_REASON_END_BA			37
 #define	DELBA_REASON_UNKNOWN_BA	38
 #define	DELBA_REASON_TIMEOUT			39
-/*  whether need define BA Action frames here?
-struct ieee80211_ADDBA_Req{
-	struct ieee80211_header_data header;
-	u8	category;
-	u8
-} __attribute__ ((packed));
-*/
-//Is this need?I put here just to make it easier to define structure BA_RECORD //WB
+
 typedef union _SEQUENCE_CONTROL{
 	u16 ShortData;
 	struct
@@ -65,5 +76,4 @@ typedef struct _BA_RECORD {
 	SEQUENCE_CONTROL	BaStartSeqCtrl;
 } BA_RECORD, *PBA_RECORD;
 
-#endif //end _BATYPE_H_
-
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c
index 8c37dd124fc..ca611faf17b 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_BAProc.c
@@ -1,9 +1,21 @@
-/********************************************************************************************************************************
- * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
- * related to TS, this part need some struture defined in QOS side code. Also TX RX is going to be resturctured, so how to send
- * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
- * WB 2008-05-27
- * *****************************************************************************************************************************/
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #include "ieee80211.h"
 #include "rtl819x_BA.h"
 
@@ -112,7 +124,6 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P
 	u8* tag = NULL;
 	u16 tmp = 0;
 	u16 len = ieee->tx_headroom + 9;
-	//category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) +  BA Timeout Value(2) +  BA Start SeqCtrl(2)(or StatusCode(2))
 	IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:%pM, ieee->dev:%p\n", __FUNCTION__, type, Dst, ieee->dev);
 	if (pBA == NULL||ieee == NULL)
 	{
@@ -138,7 +149,6 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P
 
 	BAReq->frame_control = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
 
-	//tag += sizeof( struct ieee80211_hdr_3addr); //move to action field
 	tag = (u8*)skb_put(skb, 9);
 	*tag ++= ACT_CAT_BA;
 	*tag ++= type;
@@ -171,7 +181,6 @@ static struct sk_buff* ieee80211_ADDBA(struct ieee80211_device* ieee, u8* Dst, P
 
 	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
 	return skb;
-	//return NULL;
 }
 
 /********************************************************************************************************************
@@ -196,7 +205,6 @@ static struct sk_buff* ieee80211_DELBA(
 	 struct ieee80211_hdr_3addr* Delba = NULL;
 	u8* tag = NULL;
 	u16 tmp = 0;
-	//len = head len + DELBA Parameter Set(2) + Reason Code(2)
 	u16 len = 6 + ieee->tx_headroom;
 
 	if (net_ratelimit())
@@ -213,7 +221,6 @@ static struct sk_buff* ieee80211_DELBA(
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't alloc skb for ADDBA_REQ\n");
 		return NULL;
 	}
-//	memset(skb->data, 0, len+sizeof( struct ieee80211_hdr_3addr));
 	skb_reserve(skb, ieee->tx_headroom);
 
 	Delba = ( struct ieee80211_hdr_3addr *) skb_put(skb,sizeof( struct ieee80211_hdr_3addr));
@@ -258,9 +265,6 @@ void ieee80211_send_ADDBAReq(struct ieee80211_device* ieee, u8*	dst, PBA_RECORD
 	if (skb)
 	{
 		softmac_mgmt_xmit(skb, ieee);
-		//add statistic needed here.
-		//and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
-		//WB
 	}
 	else
 	{
@@ -284,7 +288,6 @@ void ieee80211_send_ADDBARsp(struct ieee80211_device* ieee, u8* dst, PBA_RECORD
 	if (skb)
 	{
 		softmac_mgmt_xmit(skb, ieee);
-		//same above
 	}
 	else
 	{
@@ -311,7 +314,6 @@ void ieee80211_send_DELBA(struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA
 	if (skb)
 	{
 		softmac_mgmt_xmit(skb, ieee);
-		//same above
 	}
 	else
 	{
@@ -361,8 +363,7 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb)
 //some other capability is not ready now.
 	if(	(ieee->current_network.qos_data.active == 0) ||
 		(ieee->pHTInfo->bCurrentHTSupport == false) ||
-		(ieee->pHTInfo->IOTAction & HT_IOT_ACT_REJECT_ADDBA_REQ)) //||
-	//	(ieee->pStaQos->bEnableRxImmBA == false)	)
+		(ieee->pHTInfo->IOTAction & HT_IOT_ACT_REJECT_ADDBA_REQ))
 	{
 		rc = ADDBA_STATUS_REFUSED;
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
@@ -394,7 +395,6 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb)
 		goto OnADDBAReq_Fail;
 	}
 		// Admit the ADDBA Request
-	//
 	DeActivateBAEntry(ieee, pBA);
 	pBA->DialogToken = *pDialogToken;
 	pBA->BaParamSet = *pBaParamSet;
@@ -406,10 +406,9 @@ int ieee80211_rx_ADDBAReq( struct ieee80211_device* ieee, struct sk_buff *skb)
 	pBA->BaParamSet.field.BufferSize = 1;
 	else
 	pBA->BaParamSet.field.BufferSize = 32;
-	ActivateBAEntry(ieee, pBA, 0);//pBA->BaTimeoutValue);
+	ActivateBAEntry(ieee, pBA, 0);
 	ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
 
-	// End of procedure.
 	return 0;
 
 OnADDBAReq_Fail:
@@ -541,11 +540,11 @@ int ieee80211_rx_ADDBARsp( struct ieee80211_device* ieee, struct sk_buff *skb)
 		pAdmittedBA->BaParamSet = *pBaParamSet;
 		DeActivateBAEntry(ieee, pAdmittedBA);
 		ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
-	}
-	else
-	{
-		// Delay next ADDBA process.
+	} else {
 		pTS->bAddBaReqDelayed = true;
+		pTS->bDisable_AddBa = true;
+		ReasonCode = DELBA_REASON_END_BA;
+		goto OnADDBARsp_Reject;
 	}
 
 	// End of procedure
@@ -635,7 +634,6 @@ int ieee80211_rx_DELBA(struct ieee80211_device* ieee,struct sk_buff *skb)
 		pTxTs->bAddBaReqInProgress = false;
 		pTxTs->bAddBaReqDelayed = false;
 		del_timer_sync(&pTxTs->TsAddBaTimer);
-		//PlatformCancelTimer(Adapter, &pTxTs->TsAddBaTimer);
 		TxTsDeleteBA(ieee, pTxTs);
 	}
 	return 0;
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
index a97c901edbf..17121891433 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HT.h
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef _RTL819XU_HTTYPE_H_
 #define _RTL819XU_HTTYPE_H_
 
@@ -381,8 +399,7 @@ typedef struct _BSS_HT{
 	u16					bdHTInfoLen;
 
 	HT_SPEC_VER				bdHTSpecVer;
-	//HT_CAPABILITY_ELE			bdHTCapEle;
-	//HT_INFORMATION_ELE		bdHTInfoEle;
+	HT_CHANNEL_WIDTH			bdBandWidth;
 
 	u8					bdRT2RTAggregation;
 	u8					bdRT2RTLongSlotTime;
@@ -406,7 +423,7 @@ typedef struct _MIMO_EVM{
 
 typedef struct _FALSE_ALARM_STATISTICS{
 	u32	Cnt_Parity_Fail;
-	u32    Cnt_Rate_Illegal;
+	u32	Cnt_Rate_Illegal;
 	u32	Cnt_Crc8_fail;
 	u32	Cnt_all;
 }FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
@@ -476,10 +493,9 @@ typedef enum _HT_IOT_ACTION{
 	HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200,
 	HT_IOT_ACT_FORCED_RTS = 0x00000400,
 	HT_IOT_ACT_AMSDU_ENABLE = 0x00000800,
-	HT_IOT_ACT_MID_HIGHPOWER = 0x00001000,
-	HT_IOT_ACT_REJECT_ADDBA_REQ = 0x00002000,
-	HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT = 0x00004000,
-	HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00008000,
+	HT_IOT_ACT_REJECT_ADDBA_REQ = 0x00001000,
+	HT_IOT_ACT_ALLOW_PEER_AGG_ONE_PKT = 0x00002000,
+	HT_IOT_ACT_EDCA_BIAS_ON_RX = 0x00004000,
 
 	HT_IOT_ACT_HYBRID_AGGREGATION = 0x00010000,
 	HT_IOT_ACT_DISABLE_SHORT_GI = 0x00020000,
@@ -487,12 +503,19 @@ typedef enum _HT_IOT_ACTION{
 	HT_IOT_ACT_DISABLE_TX_40_MHZ = 0x00080000,
 	HT_IOT_ACT_TX_NO_AGGREGATION = 0x00100000,
 	HT_IOT_ACT_DISABLE_TX_2SS = 0x00200000,
+	
+        HT_IOT_ACT_MID_HIGHPOWER = 0x00400000,
+        HT_IOT_ACT_NULL_DATA_POWER_SAVING = 0x00800000,
+        
+        HT_IOT_ACT_DISABLE_CCK_RATE = 0x01000000,
+	HT_IOT_ACT_FORCED_ENABLE_BE_TXOP = 0x02000000,
+	HT_IOT_ACT_WA_IOT_Broadcom = 0x04000000,
 }HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
 
 typedef enum _HT_IOT_RAFUNC{
+	HT_IOT_RAFUNC_DISABLE_ALL = 0x00,
 	HT_IOT_RAFUNC_PEER_1R = 0x01,
 	HT_IOT_RAFUNC_TX_AMSDU = 0x02,
-	HT_IOT_RAFUNC_DISABLE_ALL = 0x80,
 }HT_IOT_RAFUNC, *PHT_IOT_RAFUNC;
 
 typedef enum _RT_HT_CAP{
@@ -504,5 +527,4 @@ typedef enum _RT_HT_CAP{
 	RT_HT_CAP_USE_92SE = 0x20,
 }RT_HT_CAPBILITY, *PRT_HT_CAPBILITY;
 
-#endif //_RTL819XU_HTTYPE_H_
-
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
index 01114c5181b..cfd9a1a5b38 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_HTProc.c
@@ -1,5 +1,21 @@
-
-//As this function is mainly ported from Windows driver, so leave the name little changed. If any confusion caused, tell me. Created by WB. 2008.05.08
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #include "ieee80211.h"
 #include "rtl819x_HT.h"
 u8 MCS_FILTER_ALL[16] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
@@ -8,32 +24,31 @@ u8 MCS_FILTER_1SS[16] = {0xff, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0
 
 u16 MCS_DATA_RATE[2][2][77] =
 	{	{	{13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78 ,104, 156, 208, 234, 260,
-			39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520,
+			39, 78, 117, 234, 312, 351, 390, 52, 104, 156, 208, 312, 416, 468, 520, 
 			0, 78, 104, 130, 117, 156, 195, 104, 130, 130, 156, 182, 182, 208, 156, 195,
-			195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260,
-			286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429},			// Long GI, 20MHz
-			{14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289,
-			43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578,
-			0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217,
-			217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289,
-			318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477}	},		// Short GI, 20MHz
-		{	{27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540,
-			81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080,
-			12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405,
-			405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540,
-			594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, 	// Long GI, 40MHz
-			{30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600,
-			90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200,
-			13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450,
-			450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600,
-			660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990}	}	// Short GI, 40MHz
+			195, 234, 273, 273, 312, 130, 156, 181, 156, 181, 208, 234, 208, 234, 260, 260, 
+			286, 195, 234, 273, 234, 273, 312, 351, 312, 351, 390, 390, 429},			
+			{14, 29, 43, 58, 87, 116, 130, 144, 29, 58, 87, 116, 173, 231, 260, 289, 
+			43, 87, 130, 173, 260, 347, 390, 433, 58, 116, 173, 231, 347, 462, 520, 578, 
+			0, 87, 116, 144, 130, 173, 217, 116, 144, 144, 173, 202, 202, 231, 173, 217, 
+			217, 260, 303, 303, 347, 144, 173, 202, 173, 202, 231, 260, 231, 260, 289, 289, 
+			318, 217, 260, 303, 260, 303, 347, 390, 347, 390, 433, 433, 477}	},		
+		{	{27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, 
+			81, 162, 243, 324, 486, 648, 729, 810, 108, 216, 324, 432, 648, 864, 972, 1080, 
+			12, 162, 216, 270, 243, 324, 405, 216, 270, 270, 324, 378, 378, 432, 324, 405, 
+			405, 486, 567, 567, 648, 270, 324, 378, 324, 378, 432, 486, 432, 486, 540, 540, 
+			594, 405, 486, 567, 486, 567, 648, 729, 648, 729, 810, 810, 891}, 	
+			{30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, 
+			90, 180, 270, 360, 540, 720, 810, 900, 120, 240, 360, 480, 720, 960, 1080, 1200, 
+			13, 180, 240, 300, 270, 360, 450, 240, 300, 300, 360, 420, 420, 480, 360, 450, 
+			450, 540, 630, 630, 720, 300, 360, 420, 360, 420, 480, 540, 480, 540, 600, 600, 
+			660, 450, 540, 630, 540, 630, 720, 810, 720, 810, 900, 900, 990}	}	
 	};
 
 static u8 UNKNOWN_BORADCOM[3] = {0x00, 0x14, 0xbf};
 static u8 LINKSYSWRT330_LINKSYSWRT300_BROADCOM[3] = {0x00, 0x1a, 0x70};
 static u8 LINKSYSWRT350_LINKSYSWRT150_BROADCOM[3] = {0x00, 0x1d, 0x7e};
-static u8 NETGEAR834Bv2_BROADCOM[3] = {0x00, 0x1b, 0x2f};
-static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};	//cosa 03202008
+static u8 BELKINF5D8233V1_RALINK[3] = {0x00, 0x17, 0x3f};	
 static u8 BELKINF5D82334V3_RALINK[3] = {0x00, 0x1c, 0xdf};
 static u8 PCI_RALINK[3] = {0x00, 0x90, 0xcc};
 static u8 EDIMAX_RALINK[3] = {0x00, 0x0e, 0x2e};
@@ -41,10 +56,9 @@ static u8 AIRLINK_RALINK[3] = {0x00, 0x18, 0x02};
 static u8 DLINK_ATHEROS_1[3] = {0x00, 0x1c, 0xf0};
 static u8 DLINK_ATHEROS_2[3] = {0x00, 0x21, 0x91};
 static u8 CISCO_BROADCOM[3] = {0x00, 0x17, 0x94};
+static u8 NETGEAR_BROADCOM[3] = {0x00, 0x1f, 0x33};
 static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
-// 2008/04/01 MH For Cisco G mode RX TP We need to change FW duration. Should we put the
-// code in other place??
-//static u8 WIFI_CISCO_G_AP[3] = {0x00, 0x40, 0x96};
+
 /********************************************************************************************************************
  *function:  This function update default settings in pHTInfo structure
  *   input:  PRT_HIGH_THROUGHPUT	pHTInfo
@@ -55,10 +69,7 @@ static u8 LINKSYS_MARVELL_4400N[3] = {0x00, 0x14, 0xa4};
 void HTUpdateDefaultSetting(struct ieee80211_device* ieee)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
-	//const typeof( ((struct ieee80211_device *)0)->pHTInfo ) *__mptr = &pHTInfo;
 
-	//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p,  offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
-	//printk("===>ieee:%p,\n", ieee);
 	// ShortGI support
 	pHTInfo->bRegShortGI20MHz= 1;
 	pHTInfo->bRegShortGI40MHz= 1;
@@ -291,7 +302,6 @@ u16 HTMcsToDataRate( struct ieee80211_device* ieee, u8 nMcsRate)
  * *****************************************************************************************************************/
 u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate)
 {
-	//PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 	u16		CCKOFDMRate[12] = {0x02 , 0x04 , 0x0b , 0x16 , 0x0c , 0x12 , 0x18 , 0x24 , 0x30 , 0x48 , 0x60 , 0x6c};
 	u8	is40MHz = 0;
 	u8	isShortGI = 0;
@@ -307,28 +317,24 @@ u16  TxCountToDataRate( struct ieee80211_device* ieee, u8 nDataRate)
 			is40MHz = 0;
 			isShortGI = 0;
 
-		      // nDataRate = nDataRate - 12;
 		}
 		else if(nDataRate >=0x20  && nDataRate <= 0x2f ) //(27, 44)
 		{
 			is40MHz = 1;
 			isShortGI = 0;
 
-			//nDataRate = nDataRate - 28;
 		}
 		else if(nDataRate >= 0x30  && nDataRate <= 0x3f )  //(43, 60)
 		{
 			is40MHz = 0;
 			isShortGI = 1;
 
-			//nDataRate = nDataRate - 44;
 		}
 		else if(nDataRate >= 0x40  && nDataRate <= 0x4f ) //(59, 76)
 		{
 			is40MHz = 1;
 			isShortGI = 1;
 
-			//nDataRate = nDataRate - 60;
 		}
 		return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf];
 	}
@@ -351,7 +357,6 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device* ieee)
 	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
     		    (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
     		    (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
-    		    (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
     		    (net->broadcom_cap_exist))
     		  retValue = true;
 	else if(net->bssht.bdRT2RTAggregation)
@@ -379,13 +384,15 @@ void HTIOTPeerDetermine(struct ieee80211_device* ieee)
 		if(net->bssht.RT2RT_HT_Mode & RT_HT_CAP_USE_92SE){
 			pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK_92SE;
 		}
+		if(net->bssht.RT2RT_HT_Mode & RT_HT_CAP_USE_SOFTAP){
+			pHTInfo->IOTPeer = HT_IOT_PEER_92U_SOFTAP;
+		}
 	}
 	else if(net->broadcom_cap_exist)
 		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
 	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
 			(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
-			(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
-			(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
+			(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0))
 		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
 	else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
 			(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
@@ -398,7 +405,7 @@ void HTIOTPeerDetermine(struct ieee80211_device* ieee)
 		(memcmp(net->bssid, DLINK_ATHEROS_1, 3) == 0)||
 		(memcmp(net->bssid, DLINK_ATHEROS_2, 3) == 0))
 		pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
-	else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+	else if ((memcmp(net->bssid, CISCO_BROADCOM, 3)==0)||net->cisco_cap_exist)
 		pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
 	else if ((memcmp(net->bssid, LINKSYS_MARVELL_4400N, 3) == 0) ||
 		  net->marvell_cap_exist)
@@ -439,25 +446,6 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
 bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 {
 	bool retValue = false;
-
-#ifdef TODO
-	// Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192)
-
-#if (DEV_BUS_TYPE == USB_INTERFACE)
-	// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
-	retValue = true;
-#elif (DEV_BUS_TYPE == PCI_INTERFACE)
-	// Enable MCS15 if the peer is Cisco AP. by Emily, 2008.05.12
-//	if(pBssDesc->bCiscoCapExist)
-//		retValue = false;
-//	else
-		retValue = false;
-#endif
-#endif
-#endif
-	// Jerry Chang suggest that 8190 1x2 does not need to disable MCS15
-
 	return retValue;
 }
 
@@ -624,17 +612,11 @@ HTIOCActRejcectADDBARequest(struct ieee80211_network *network)
   HTIOTActIsEDCABiasRx(struct ieee80211_device* ieee,struct ieee80211_network *network)
 {
 	u8	retValue = 0;
-	//if(IS_HARDWARE_TYPE_8192SU(Adapter))
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 	{
-//#if UNDER_VISTA
-//		if(pBssDesc->Vender==HT_IOT_PEER_ATHEROS ||
-//			pBssDesc->Vender==HT_IOT_PEER_RALINK)
-//#else
 		if(pHTInfo->IOTPeer==HT_IOT_PEER_ATHEROS ||
 		   pHTInfo->IOTPeer==HT_IOT_PEER_BROADCOM ||
 		   pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
-//#endif
 			return 1;
 
 	}
@@ -649,7 +631,6 @@ HTIOTActDisableShortGI(struct ieee80211_device* ieee,struct ieee80211_network *n
 
 	if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
 	{
-		if(network->bssht.bdHT1R)
 			retValue = 1;
 	}
 
@@ -662,9 +643,10 @@ HTIOTActDisableHighPower(struct ieee80211_device* ieee,struct ieee80211_network
 	u8	retValue = 0;
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 
-	if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK)
+	if(pHTInfo->IOTPeer==HT_IOT_PEER_RALINK ||
+		pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK ||
+		pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK_92SE)
 	{
-		if(network->bssht.bdHT1R)
 			retValue = 1;
 	}
 
@@ -718,8 +700,7 @@ HTIOTActIsTxNoAggregation(struct ieee80211_device* ieee,struct ieee80211_network
 		(KEY_TYPE_WEP40 == ieee->group_key_type) ||
 		(KEY_TYPE_TKIP == ieee->pairwise_key_type) )
 	{
-		if(pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK ||
-		    pHTInfo->IOTPeer==HT_IOT_PEER_UNKNOWN)
+		if(pHTInfo->IOTPeer==HT_IOT_PEER_REALTEK)
 			retValue = 1;
 	}
 
@@ -751,10 +732,11 @@ bool HTIOCActAllowPeerAggOnePacket(struct ieee80211_device* ieee,struct ieee8021
 {
 	bool 	retValue = false;
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
+	if(pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM)
 	{
-		if(pHTInfo->IOTPeer == HT_IOT_PEER_MARVELL)
+		if((memcmp(network->bssid, NETGEAR_BROADCOM, 3)==0)
+			&& (network->bssht.bdBandWidth == HT_CHANNEL_WIDTH_20_40))
 			return true;
-
 	}
 	return retValue;
 }
@@ -783,7 +765,6 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 {
 	PRT_HIGH_THROUGHPUT	pHT = ieee->pHTInfo;
 	PHT_CAPABILITY_ELE 	pCapELE = NULL;
-	//u8 bIsDeclareMCS13;
 
 	if ((posHTCap == NULL) || (pHT == NULL))
 	{
@@ -813,13 +794,11 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 		pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
 	}
 
-//	pCapELE->ChlWidth 		= (pHT->bRegBW40MHz?1:0);
 	pCapELE->MimoPwrSave 		= pHT->SelfMimoPs;
 	pCapELE->GreenField		= 0; // This feature is not supported now!!
 	pCapELE->ShortGI20Mhz		= 1; // We can receive Short GI!!
 	pCapELE->ShortGI40Mhz		= 1; // We can receive Short GI!!
-	//DbgPrint("TX HT cap/info ele BW=%d SG20=%d SG40=%d\n\r",
-		//pCapELE->ChlWidth, pCapELE->ShortGI20Mhz, pCapELE->ShortGI40Mhz);
+
 	pCapELE->TxSTBC 		= 1;
 	pCapELE->RxSTBC 		= 0;
 	pCapELE->DelayBA		= 0;	// Do not support now!!
@@ -879,12 +858,6 @@ void HTConstructCapabilityElement(struct ieee80211_device* ieee, u8* posHTCap, u
 	else
 		*len = 26 + 2;
 
-
-
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTCap, *len -2);
-
-	//Print each field in detail. Driver should not print out this message by default
-//	HTDebugHTCapability(posHTCap, (u8*)"HTConstructCapability()");
 	return;
 
 }
@@ -938,8 +911,6 @@ void HTConstructInfoElement(struct ieee80211_device* ieee, u8* posHTInfo, u8* le
 		//STA should not generate High Throughput Information Element
 		*len = 0;
 	}
-	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_HT, posHTInfo, *len - 2);
-	//HTDebugHTInfo(posHTInfo, "HTConstructInforElement");
 	return;
 }
 
@@ -1005,7 +976,6 @@ void HTConstructRT2RTAggElement(struct ieee80211_device* ieee, u8* posRT2RTAgg,
 	*/
 
 #else
-	// Do Nothing
 #endif
 
 	posRT2RTAgg->Length = 6;
@@ -1188,12 +1158,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 		return;
 	}
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "===> HTOnAssocRsp_wq(): HT_ENABLE\n");
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTCapBuf, sizeof(HT_CAPABILITY_ELE));
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, pHTInfo->PeerHTInfoBuf, sizeof(HT_INFORMATION_ELE));
 
-//	HTDebugHTCapability(pHTInfo->PeerHTCapBuf,"HTOnAssocRsp_wq");
-//	HTDebugHTInfo(pHTInfo->PeerHTInfoBuf,"HTOnAssocRsp_wq");
-	//
 	if(!memcmp(pHTInfo->PeerHTCapBuf,EWC11NHTCap, sizeof(EWC11NHTCap)))
 		pPeerHTCap = (PHT_CAPABILITY_ELE)(&pHTInfo->PeerHTCapBuf[4]);
 	else
@@ -1209,12 +1174,10 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	// Configurations:
 	////////////////////////////////////////////////////////
 	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTCap, sizeof(HT_CAPABILITY_ELE));
-//	IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_HT, pPeerHTInfo, sizeof(HT_INFORMATION_ELE));
-	// Config Supported Channel Width setting
-	//
+
 	HTSetConnectBwMode(ieee, (HT_CHANNEL_WIDTH)(pPeerHTCap->ChlWidth), (HT_EXTCHNL_OFFSET)(pPeerHTInfo->ExtChlOffset));
 
-//	if(pHTInfo->bCurBW40MHz == true)
+	if(pHTInfo->bCurBW40MHz == true)
 		pHTInfo->bCurTxBW40MHz = ((pPeerHTInfo->RecommemdedTxWidth == 1)?true:false);
 
 	//
@@ -1295,7 +1258,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 
 	// <2> Set AMPDU Minimum MPDU Start Spacing
 	// 802.11n 3.0 section 9.7d.3
-#if 1
+#if 0
 	if(pHTInfo->MPDU_Density > pPeerHTCap->MPDUDensity)
 		pHTInfo->CurrentMPDUDensity = pHTInfo->MPDU_Density;
 	else
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h
index d4565ecc7ab..928062f3571 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_Qos.h
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef __INC_QOS_TYPE_H
 #define __INC_QOS_TYPE_H
 
@@ -36,18 +54,6 @@
 
 #define	MAX_WMMELE_LENGTH	64
 
-//
-// QoS mode.
-// enum 0, 1, 2, 4: since we can use the OR(|) operation.
-//
-// QOS_MODE is redefined for enum can't be ++, | under C++ compiler, 2006.05.17, by rcnjko.
-//typedef	enum _QOS_MODE{
-//	QOS_DISABLE		= 0,
-//	QOS_WMM			= 1,
-//	QOS_EDCA			= 2,
-//	QOS_HCCA			= 4,
-//}QOS_MODE,*PQOS_MODE;
-//
 typedef u32 QOS_MODE, *PQOS_MODE;
 #define QOS_DISABLE		0
 #define QOS_WMM			1
@@ -219,19 +225,6 @@ typedef	union _QOS_INFO_FIELD{
 
 }QOS_INFO_FIELD, *PQOS_INFO_FIELD;
 
-//
-// ACI to AC coding.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-// AC_CODING is redefined for enum can't be ++, | under C++ compiler, 2006.05.17, by rcnjko.
-//typedef	enum _AC_CODING{
-//	AC0_BE	= 0,		// ACI: 0x00	// Best Effort
-//	AC1_BK	= 1,		// ACI: 0x01	// Background
-//	AC2_VI	= 2,		// ACI: 0x10	// Video
-//	AC3_VO	= 3,		// ACI: 0x11	// Voice
-//	AC_MAX = 4,		// Max: define total number; Should not to be used as a real enum.
-//}AC_CODING,*PAC_CODING;
-//
 typedef u32 AC_CODING;
 #define AC0_BE	0		// ACI: 0x00	// Best Effort
 #define AC1_BK	1		// ACI: 0x01	// Background
@@ -252,7 +245,7 @@ typedef	union _ACI_AIFSN{
 		u8	ACM:1;
 		u8	ACI:2;
 		u8	Reserved:1;
-	}f;	// Field
+	}f;
 }ACI_AIFSN, *PACI_AIFSN;
 
 //
@@ -265,7 +258,7 @@ typedef	union _ECW{
 	{
 		u8	ECWmin:4;
 		u8	ECWmax:4;
-	}f;	// Field
+	}f;
 }ECW, *PECW;
 
 //
@@ -281,7 +274,7 @@ typedef	union _AC_PARAM{
 		ACI_AIFSN	AciAifsn;
 		ECW		Ecw;
 		u16		TXOPLimit;
-	}f;	// Field
+	}f;
 }AC_PARAM, *PAC_PARAM;
 
 
@@ -354,7 +347,7 @@ typedef union _TSPEC_BODY{
 		u32	MinPhyRate;
 		u16	SurplusBandwidthAllowance;
 		u16	MediumTime;
-	} f;	// Field
+	} f;
 }TSPEC_BODY, *PTSPEC_BODY;
 
 
@@ -384,7 +377,6 @@ typedef	enum _ACM_METHOD{
 
 
 typedef struct _ACM{
-//	u8		RegEnableACM;
 	u64		UsedTime;
 	u64		MediumTime;
 	u8		HwAcmCtl;	// TRUE: UsedTime exceed => Do NOT USE this AC. It wll be written to ACM_CONTROL(0xBF BIT 0/1/2 in 8185B).
@@ -404,10 +396,6 @@ typedef	u8		AC_UAPSD, *PAC_UAPSD;
 #define	GET_BE_UAPSD(_apsd) ((_apsd) & BIT3)
 #define	SET_BE_UAPSD(_apsd) ((_apsd) |= BIT3)
 
-
-//typedef struct _TCLASS{
-// TODO
-//} TCLASS, *PTCLASS;
 typedef union _QOS_TCLAS{
 
 	struct _TYPE_GENERAL{
@@ -459,32 +447,12 @@ typedef union _QOS_TCLAS{
 	} TYPE2_8021Q;
 } QOS_TCLAS, *PQOS_TCLAS;
 
-//typedef struct _WMM_TSTREAM{
-//
-//- TSPEC
-//- AC (which to mapping)
-//} WMM_TSTREAM, *PWMM_TSTREAM;
 typedef struct _QOS_TSTREAM{
 	u8			AC;
 	WMM_TSPEC		TSpec;
 	QOS_TCLAS		TClass;
 } QOS_TSTREAM, *PQOS_TSTREAM;
 
-//typedef struct _U_APSD{
-//- TriggerEnable [4]
-//- MaxSPLength
-//- HighestAcBuffered
-//} U_APSD, *PU_APSD;
-
-//joseph TODO:
-//	UAPSD function should be implemented by 2 data structure
-//	"Qos control field" and "Qos info field"
-//typedef struct _QOS_UAPSD{
-//	u8			bTriggerEnable[4];
-//	u8 			MaxSPLength;
-//	u8			HighestBufAC;
-//} QOS_UAPSD, *PQOS_APSD;
-
 //----------------------------------------------------------------------------
 //      802.11 Management frame Status Code field
 //----------------------------------------------------------------------------
@@ -498,7 +466,6 @@ typedef struct _OCTET_STRING{
 // Ref: DOT11_QOS in 8185 code. [def. in QoS_mp.h]
 //
 typedef struct _STA_QOS{
-	//DECLARE_RT_OBJECT(STA_QOS);
 	u8				WMMIEBuf[MAX_WMMELE_LENGTH];
 	u8*				WMMIE;
 
@@ -565,18 +532,9 @@ typedef struct _BSS_QOS{
 	AC_PARAM		AcParameter[4];
 }BSS_QOS, *PBSS_QOS;
 
-
-//
-// Ref: sQoSCtlLng and QoSCtl definition in 8185 QoS code.
-//#define QoSCtl   ((	(Adapter->bRegQoS) && (Adapter->dot11QoS.QoSMode &(QOS_EDCA|QOS_HCCA))	  )  ?sQoSCtlLng:0)
-//
 #define sQoSCtlLng			2
 #define	QOS_CTRL_LEN(_QosMode)		((_QosMode > QOS_DISABLE)? sQoSCtlLng : 0)
 
-
-//Added by joseph
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
-//#define UP2AC(up)			((up<3)?((up==0)?1:0):(up>>1))
 #define IsACValid(ac)			((ac<=7 )?true:false )
 
-#endif // #ifndef __INC_QOS_TYPE_H
+#endif
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h
index baaac2149de..a07b2344a6f 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_TS.h
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef _TSTYPE_H_
 #define _TSTYPE_H_
 #include "rtl819x_Qos.h"
@@ -30,10 +48,10 @@ typedef struct _TX_TS_RECORD{
 	u16				TxCurSeq;
 	BA_RECORD			TxPendingBARecord;  	// For BA Originator
 	BA_RECORD			TxAdmittedBARecord;	// For BA Originator
-//	QOS_DL_RECORD		DLRecord;
 	u8				bAddBaReqInProgress;
 	u8				bAddBaReqDelayed;
 	u8				bUsingBa;
+	u8 				bDisable_AddBa;
 	struct timer_list		TsAddBaTimer;
 	u8				num;
 } TX_TS_RECORD, *PTX_TS_RECORD;
@@ -48,9 +66,6 @@ typedef struct _RX_TS_RECORD {
 	u16				RxLastSeqNum;
 	u8				RxLastFragNum;
 	u8				num;
-//	QOS_DL_RECORD		DLRecord;
 } RX_TS_RECORD, *PRX_TS_RECORD;
 
-
 #endif
-
diff --git a/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c
index de143ecae5f..7ffc06ca89a 100644
--- a/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192su/ieee80211/rtl819x_TSProc.c
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #include "ieee80211.h"
 #include <linux/etherdevice.h>
 #include <linux/slab.h>
@@ -29,7 +47,6 @@ void RxPktPendingTimeout(unsigned long data)
 
 	PRX_REORDER_ENTRY 	pReorderEntry = NULL;
 
-	//u32 flags = 0;
 	unsigned long flags = 0;
 	struct ieee80211_rxb *stats_IndicateArray[REORDER_WIN_SIZE];
 	u8 index = 0;
@@ -37,7 +54,6 @@ void RxPktPendingTimeout(unsigned long data)
 
 
 	spin_lock_irqsave(&(ieee->reorder_spinlock), flags);
-	//PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
 	IEEE80211_DEBUG(IEEE80211_DL_REORDER,"==================>%s()\n",__FUNCTION__);
 	if(pRxTs->RxTimeoutIndicateSeq != 0xffff)
 	{
@@ -72,7 +88,6 @@ void RxPktPendingTimeout(unsigned long data)
 
 	if(index>0)
 	{
-		// Set RxTimeoutIndicateSeq to 0xffff to indicate no pending packets in buffer now.
 		pRxTs->RxTimeoutIndicateSeq = 0xffff;
 
 		// Indicate packets
@@ -82,6 +97,7 @@ void RxPktPendingTimeout(unsigned long data)
 			return;
 		}
 		ieee80211_indicate_packets(ieee, stats_IndicateArray, index);
+		 bPktInBuf = false;
 	}
 
 	if(bPktInBuf && (pRxTs->RxTimeoutIndicateSeq==0xffff))
@@ -126,6 +142,7 @@ void ResetTxTsEntry(PTX_TS_RECORD pTS)
 	pTS->bAddBaReqInProgress = false;
 	pTS->bAddBaReqDelayed = false;
 	pTS->bUsingBa = false;
+	pTS->bDisable_AddBa = false;
 	ResetBaEntry(&pTS->TxAdmittedBARecord); //For BA Originator
 	ResetBaEntry(&pTS->TxPendingBARecord);
 }
@@ -212,7 +229,6 @@ void TSInitialize(struct ieee80211_device *ieee)
 	}
 	// Initialize unused Rx Reorder List.
 	INIT_LIST_HEAD(&ieee->RxReorder_Unused_List);
-//#ifdef TO_DO_LIST
 	for(count = 0; count < REORDER_ENTRY_NUM; count++)
 	{
 		list_add_tail( &pRxReorderEntry->List,&ieee->RxReorder_Unused_List);
@@ -220,7 +236,6 @@ void TSInitialize(struct ieee80211_device *ieee)
 			break;
 		pRxReorderEntry = &ieee->RxReorderEntry[count+1];
 	}
-//#endif
 
 }
 
@@ -236,7 +251,6 @@ void AdmitTS(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, u32 I
 
 PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8 TID, TR_SELECT	TxRxSelect)
 {
-	//DIRECTION_VALUE 	dir;
 	u8 	dir;
 	bool				search_dir[4] = {0, 0, 0, 0};
 	struct list_head*		psearch_list; //FIXME
@@ -282,18 +296,15 @@ PTS_COMMON_INFO SearchAdmitTRStream(struct ieee80211_device *ieee, u8*	Addr, u8
 	else
 		psearch_list = &ieee->Rx_TS_Admit_List;
 
-	//for(dir = DIR_UP; dir <= DIR_BI_DIR; dir++)
 	for(dir = 0; dir <= DIR_BI_DIR; dir++)
 	{
 		if(search_dir[dir] ==false )
 			continue;
 		list_for_each_entry(pRet, psearch_list, List){
-	//		IEEE80211_DEBUG(IEEE80211_DL_TS, "ADD:%pM, TID:%d, dir:%d\n", pRet->Addr, pRet->TSpec.f.TSInfo.field.ucTSID, pRet->TSpec.f.TSInfo.field.ucDirection);
 			if (memcmp(pRet->Addr, Addr, 6) == 0)
 				if (pRet->TSpec.f.TSInfo.field.ucTSID == TID)
 					if(pRet->TSpec.f.TSInfo.field.ucDirection == dir)
 					{
-	//					printk("Bingo! got it\n");
 						break;
 					}
 
@@ -352,10 +363,9 @@ bool GetTs(
 	//
 	if(is_broadcast_ether_addr(Addr) || is_multicast_ether_addr(Addr))
 	{
-		IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
+		IEEE80211_DEBUG(IEEE80211_DL_ERR, "ERR! get TS for Broadcast or Multicast\n");
 		return false;
 	}
-
 	if (ieee->current_network.qos_data.supported == 0)
 		UP = 0;
 	else
@@ -363,7 +373,7 @@ bool GetTs(
 		// In WMM case: we use 4 TID only
 		if (!IsACValid(TID))
 		{
-			IEEE80211_DEBUG(IEEE80211_DL_ERR, " in %s(), TID(%d) is not valid\n", __FUNCTION__, TID);
+			IEEE80211_DEBUG(IEEE80211_DL_ERR, "ERR! in %s(), TID(%d) is not valid\n", __FUNCTION__, TID);
 			return false;
 		}
 
@@ -478,7 +488,6 @@ void RemoveTsEntry(
 	TR_SELECT			TxRxSelect
 	)
 {
-	//u32 flags = 0;
 	unsigned long flags = 0;
 	del_timer_sync(&pTs->SetupTimer);
 	del_timer_sync(&pTs->InactTimer);
@@ -486,7 +495,6 @@ void RemoveTsEntry(
 
 	if(TxRxSelect == RX_DIR)
 	{
-//#ifdef TO_DO_LIST
 		PRX_REORDER_ENTRY	pRxReorderEntry;
 		PRX_TS_RECORD 		pRxTS = (PRX_TS_RECORD)pTs;
 		if(timer_pending(&pRxTS->RxPktPendingTimer))
@@ -494,9 +502,7 @@ void RemoveTsEntry(
 
                 while(!list_empty(&pRxTS->RxPendingPktList))
                 {
-                //      PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK);
                         spin_lock_irqsave(&(ieee->reorder_spinlock), flags);
-                        //pRxReorderEntry = list_entry(&pRxTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
 			pRxReorderEntry = (PRX_REORDER_ENTRY)list_entry(pRxTS->RxPendingPktList.prev,RX_REORDER_ENTRY,List);
                         list_del_init(&pRxReorderEntry->List);
                         {
@@ -514,11 +520,8 @@ void RemoveTsEntry(
                                 prxb = NULL;
                         }
                         list_add_tail(&pRxReorderEntry->List,&ieee->RxReorder_Unused_List);
-                        //PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
                         spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
                 }
-
-//#endif
 	}
 	else
 	{
diff --git a/drivers/staging/rtl8192su/r8192SU_HWImg.c b/drivers/staging/rtl8192su/r8192SU_HWImg.c
index ba8e12c209c..7c4fd18d89c 100644
--- a/drivers/staging/rtl8192su/r8192SU_HWImg.c
+++ b/drivers/staging/rtl8192su/r8192SU_HWImg.c
@@ -93,7 +93,7 @@ u32 Rtl8192SUPHY_REG_2T2RArray[PHY_REG_2T2RArrayLength] = {
 0x900,0x00000000,
 0x904,0x00000023,
 0x908,0x00000000,
-0x90c,0x03321333,
+0x90c,0x01121313,
 0xa00,0x00d047c8,
 0xa04,0x80ff0008,
 0xa08,0x8ccd8300,
@@ -135,7 +135,7 @@ u32 Rtl8192SUPHY_REG_2T2RArray[PHY_REG_2T2RArrayLength] = {
 0xc68,0x69543420,
 0xc6c,0x433c0094,
 0xc70,0x2c7f000d,
-0xc74,0x0186155b,
+0xc74,0x0186175b,
 0xc78,0x0000001f,
 0xc7c,0x00b91612,
 0xc80,0x40000100,
@@ -256,13 +256,34 @@ u32 Rtl8192SUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength] = {
 };
 
 u32 Rtl8192SUPHY_REG_Array_PG[PHY_REG_Array_PGLength] = {
-0xe00,0xffffffff,0x06090909,
-0xe04,0xffffffff,0x00030406,
+0xe00,0xffffffff,0x04060606,
+0xe04,0xffffffff,0x00020204,
 0xe08,0x0000ff00,0x00000000,
-0xe10,0xffffffff,0x0a0c0d0e,
-0xe14,0xffffffff,0x04070809,
-0xe18,0xffffffff,0x0a0c0d0e,
-0xe1c,0xffffffff,0x04070809,
+0xe10,0xffffffff,0x0408080a,
+0xe14,0xffffffff,0x00020204,
+0xe18,0xffffffff,0x0408080a,
+0xe1c,0xffffffff,0x00020204,
+0xe00,0xffffffff,0x00000000,
+0xe04,0xffffffff,0x00000000,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x00000000,
+0xe14,0xffffffff,0x00000000,
+0xe18,0xffffffff,0x00000000,
+0xe1c,0xffffffff,0x00000000,
+0xe00,0xffffffff,0x00000000,
+0xe04,0xffffffff,0x00000000,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x00000000,
+0xe14,0xffffffff,0x00000000,
+0xe18,0xffffffff,0x00000000,
+0xe1c,0xffffffff,0x00000000,
+0xe00,0xffffffff,0x00000000,
+0xe04,0xffffffff,0x00000000,
+0xe08,0x0000ff00,0x00000000,
+0xe10,0xffffffff,0x00000000,
+0xe14,0xffffffff,0x00000000,
+0xe18,0xffffffff,0x00000000,
+0xe1c,0xffffffff,0x00000000,
 };
 
 u32 Rtl8192SURadioA_1T_Array[RadioA_1T_ArrayLength] = {
diff --git a/drivers/staging/rtl8192su/r8192SU_HWImg.h b/drivers/staging/rtl8192su/r8192SU_HWImg.h
index 36e84aff6ed..69a66c39960 100644
--- a/drivers/staging/rtl8192su/r8192SU_HWImg.h
+++ b/drivers/staging/rtl8192su/r8192SU_HWImg.h
@@ -1,3 +1,21 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef __INC_HAL8192SU_FW_IMG_H
 #define __INC_HAL8192SU_FW_IMG_H
 
@@ -19,7 +37,7 @@ extern u32 Rtl8192SUPHY_ChangeTo_1T1RArray[PHY_ChangeTo_1T1RArrayLength];
 extern u32 Rtl8192SUPHY_ChangeTo_1T2RArray[PHY_ChangeTo_1T2RArrayLength];
 #define PHY_ChangeTo_2T2RArrayLength 45
 extern u32 Rtl8192SUPHY_ChangeTo_2T2RArray[PHY_ChangeTo_2T2RArrayLength];
-#define PHY_REG_Array_PGLength 21
+#define PHY_REG_Array_PGLength 84
 extern u32 Rtl8192SUPHY_REG_Array_PG[PHY_REG_Array_PGLength];
 #define RadioA_1T_ArrayLength 202
 extern u32 Rtl8192SURadioA_1T_Array[RadioA_1T_ArrayLength];
@@ -38,5 +56,5 @@ extern u32 Rtl8192SUMACPHY_Array_PG[MACPHY_Array_PGLength];
 #define AGCTAB_ArrayLength 320
 extern u32 Rtl8192SUAGCTAB_Array[AGCTAB_ArrayLength];
 
-#endif //__INC_HAL8192SU_FW_IMG_H
+#endif
 
diff --git a/drivers/staging/rtl8192su/r8192SU_led.c b/drivers/staging/rtl8192su/r8192SU_led.c
index 609dba67eb4..5d96b356bf1 100644
--- a/drivers/staging/rtl8192su/r8192SU_led.c
+++ b/drivers/staging/rtl8192su/r8192SU_led.c
@@ -1087,22 +1087,13 @@ BlinkTimerCallback(
 	struct net_device 	*dev = (struct net_device *)data;
 	struct r8192_priv 	*priv = ieee80211_priv(dev);
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 	schedule_work(&(priv->BlinkWorkItem));
-#endif
 }
 
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
 void BlinkWorkItemCallback(struct work_struct *work)
 {
 	struct r8192_priv *priv = container_of(work, struct r8192_priv, BlinkWorkItem);
-#else
-void BlinkWorkItemCallback(void * Context)
-{
-	struct net_device *dev = (struct net_device *)Context;
-	struct r8192_priv *priv = ieee80211_priv(dev);
-#endif
 
 	PLED_819xUsb	 pLed = priv->pLed;
 
diff --git a/drivers/staging/rtl8192su/r8192S_Efuse.c b/drivers/staging/rtl8192su/r8192S_Efuse.c
index f0ce6562c23..bbefd0f3034 100644
--- a/drivers/staging/rtl8192su/r8192S_Efuse.c
+++ b/drivers/staging/rtl8192su/r8192S_Efuse.c
@@ -1,27 +1,26 @@
 /******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
  *
- *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ * Based on the r8180 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
  *
- * Module:	Efuse.c	( Source C File)
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  *
- * Note:		Copy from WMAC for the first version!!!!
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
  *
- * Function:
- *
- * Export:
- *
- * Abbrev:
- *
- * History:
- * Data			Who		Remark
- *
- * 09/23/2008	MHC		Porting Efuse R/W API from WMAC.
- * 11/10/2008	MHC		1. Porting from 8712 EFUSE.
- *						2. Add description and reorganize code arch.
- * 11/16/2008 	MHC		1. Reorganize code architecture.
- *						2. Rename for some API and change extern or static type.
- *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
 ******************************************************************************/
 #include "r8192U.h"
 #include "r8192S_hw.h"
@@ -30,20 +29,14 @@
 #include "r8192S_Efuse.h"
 
 #include <linux/types.h>
+#include <linux/ctype.h>
 
-//typedef  int	INT32;
-//
-// In the future, we will always support EFUSE!!
-//
-/*---------------------------Define Local Constant---------------------------*/
 #define 	_POWERON_DELAY_
 #define 	_PRE_EXECUTE_READ_CMD_
 
 #define		EFUSE_REPEAT_THRESHOLD_		3
 #define		EFUSE_ERROE_HANDLE		1
 
-
-// From 8712!!!!!
 typedef struct _EFUSE_MAP_A{
 	u8 offset;		//0~15
 	u8 word_start;	//0~3
@@ -91,14 +84,11 @@ struct efuse_priv
 	u8		tx_power_g[14];
 };
 
-/*---------------------------Define Local Constant---------------------------*/
-
-
-/*------------------------Define global variable-----------------------------*/
 const u8 MAX_PGPKT_SIZE = 9; //header+ 2* 4 words (BYTES)
 const u8 PGPKT_DATA_SIZE = 8; //BYTES sizeof(u8)*8
 const u32 EFUSE_MAX_SIZE = 512;
 
+const u8 EFUSE_OOB_PROTECT_BYTES = 14;
 
 const EFUSE_MAP RTL8712_SDIO_EFUSE_TABLE[]={
 				//offset	word_s	byte_start	byte_cnts
@@ -117,15 +107,6 @@ const EFUSE_MAP RTL8712_SDIO_EFUSE_TABLE[]={
 /*TxPwIndex */	{11		,0		,0			,28	}  // 58~73h  3...4
 };
 
-/*------------------------Define global variable-----------------------------*/
-
-
-/*------------------------Define local variable------------------------------*/
-
-/*------------------------Define local variable------------------------------*/
-
-
-/*--------------------Define function prototype-----------------------*/
 //
 // From WMAC Efuse one byte R/W
 //
@@ -176,7 +157,7 @@ efuse_ParsingMap(char* szStr,u32* pu4bVal,u32* pu4bMove);
 //
 static	u8
 efuse_PgPacketRead(	struct net_device* dev,u8	offset,u8 *data);
-static	u8
+static	u32
 efuse_PgPacketWrite(struct net_device* dev,u8 offset,u8 word_en,u8	*data);
 static	void
 efuse_WordEnableDataRead(	u8 word_en,u8 *sourdata,u8 *targetdata);
@@ -194,7 +175,6 @@ efuse_CalculateWordCnts(u8 word_en);
 #ifdef TO_DO_LIST
 static void efuse_reg_ctrl(struct net_device* dev, u8 bPowerOn);
 #endif
-/*--------------------Define function prototype-----------------------*/
 
 
 
@@ -242,8 +222,7 @@ EFUSE_Initialize(struct net_device* dev)
 	//Set E-fuse program time & read time : 0x30[30:24]=1110010b
 	write_nic_byte(dev, EFUSE_CTRL+3, 0x72);
 
-}	/* EFUSE_Initialize */
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_Read1Byte
@@ -302,7 +281,7 @@ EFUSE_Read1Byte(struct net_device* dev, u16	Address)
 	else
 		return 0xFF;
 
-}	/* EFUSE_Read1Byte */
+}
 
 
 /*-----------------------------------------------------------------------------
@@ -324,13 +303,10 @@ EFUSE_Read1Byte(struct net_device* dev, u16	Address)
 extern	void
 EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value)
 {
-	//u8	data;
 	u8	Bytetemp = {0x00};
 	u8	temp = {0x00};
 	u32	k=0;
 
-	//RT_TRACE(COMP_EFUSE, "Addr=%x Data =%x\n", Address, Value);
-
 	if( Address < EFUSE_MAC_LEN)	//E-fuse 512Byte
 	{
 		write_nic_byte(dev, EFUSE_CTRL, Value);
@@ -349,7 +325,6 @@ EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value)
 		temp = Bytetemp | 0x80;
 		write_nic_byte(dev, EFUSE_CTRL+3, temp);
 
-		//Wait Write-ready (0x30[31]=0)
 		Bytetemp = read_nic_byte(dev, EFUSE_CTRL+3);
 		while(Bytetemp & 0x80)
 		{
@@ -363,8 +338,7 @@ EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value)
 		}
 	}
 
-}	/* EFUSE_Write1Byte */
-
+}
 
 #ifdef EFUSE_FOR_92SU
 //
@@ -380,12 +354,10 @@ EFUSE_Write1Byte(struct net_device* dev, u16 Address,u8 Value)
 //
 void do_93c46(struct net_device* dev,  u8 addorvalue)
 {
-    	//u8  clear[1] = {0x0};      // cs=0 , sk=0 , di=0 , do=0
 	u8  cs[1] = {0x88};        // cs=1 , sk=0 , di=0 , do=0
 	u8  cssk[1] = {0x8c};      // cs=1 , sk=1 , di=0 , do=0
 	u8  csdi[1] = {0x8a};      // cs=1 , sk=0 , di=1 , do=0
     	u8  csskdi[1] = {0x8e};    // cs=1 , sk=1 , di=1 , do=0
-	//u8  di[1] = {0x82};        // cs=0 , sk=0 , di=1 , do=0
     	u8  count;
 
     	for(count=0 ; count<8 ; count++)
@@ -424,7 +396,6 @@ u16 Read93C46(struct net_device*	dev,	u16	Reg	)
 	u8  	cssk[1] = {0x8c};      // cs=1 , sk=1 , di=0 , do=0
 	u8  	csdi[1] = {0x8a};      // cs=1 , sk=0 , di=1 , do=0
    	u8  	csskdi[1] = {0x8e};    // cs=1 , sk=1 , di=1 , do=0
-	//u8  	di[1] = {0x82};        // cs=0 , sk=0 , di=1 , do=0
 	u8  	EepromSEL[1]={0x00};
 	u8  	address;
 
@@ -434,7 +405,6 @@ u16 Read93C46(struct net_device*	dev,	u16	Reg	)
 
 	address = (u8)Reg;
 
-	// Suggested by SD1 Alex, 2008.10.20. Revised by Roger.
 	*EepromSEL= read_nic_byte(dev, EPROM_CMD);
 
 	if((*EepromSEL & 0x10) == 0x10) // select 93c46
@@ -486,13 +456,10 @@ u16 Read93C46(struct net_device*	dev,	u16	Reg	)
 void
 ReadEFuseByte(struct net_device* dev,u16 _offset, u8 *pbuf)
 {
-
-	//u16 	indexk=0;
 	u32  value32;
 	u8 	readbyte;
 	u16 	retry;
 
-
 	//Write Address
 	write_nic_byte(dev, EFUSE_CTRL+1, (_offset & 0xff));
 	readbyte = read_nic_byte(dev, EFUSE_CTRL+2);
@@ -505,7 +472,6 @@ ReadEFuseByte(struct net_device* dev,u16 _offset, u8 *pbuf)
 	//Check bit 32 read-ready
 	retry = 0;
 	value32 = read_nic_dword(dev, EFUSE_CTRL);
-	//while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10))
 	while(!(((value32 >> 24) & 0xff) & 0x80)  && (retry<10000))
 	{
 		value32 = read_nic_dword(dev, EFUSE_CTRL);
@@ -532,78 +498,145 @@ void
 ReadEFuse(struct net_device* dev, u16	 _offset, u16 _size_byte, u8 *pbuf)
 {
 
-	u8  	efuseTbl[128];
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8  	efuseTbl[EFUSE_MAP_LEN];
 	u8  	rtemp8[1];
 	u16 	eFuse_Addr = 0;
 	u8  	offset, wren;
 	u16  	i, j;
-	u16 	eFuseWord[16][4];// = {0xFF};//FIXLZM
-
-	for(i=0; i<16; i++)
-		for(j=0; j<4; j++)
-			eFuseWord[i][j]=0xFF;
+	u16 	eFuseWord[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT];
+	u16	efuse_utilized = 0;
+	u16	efuse_usage = 0;
 
-	// Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10.
-	if((_offset + _size_byte)>128)
-	{// total E-Fuse table is 128bytes
-		//RT_TRACE(COMP_EFUSE, "ReadEFuse(): Invalid offset(%#x) with read bytes(%#x)!!\n",_offset, _size_byte);
+	if((_offset + _size_byte)>EFUSE_MAP_LEN)
+	{
 		printk("ReadEFuse(): Invalid offset with read bytes!!\n");
 		return;
 	}
 
-	// Refresh efuse init map as all oxFF.
-	for (i = 0; i < 128; i++)
-		efuseTbl[i] = 0xFF;
+	for(i = 0; i < EFUSE_MAX_SECTION; i++)
+		for(j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
+			eFuseWord[i][j]=0xFFFF;
 
 #if (EFUSE_READ_SWITCH == 1)
 	ReadEFuseByte(dev, eFuse_Addr, rtemp8);
 #else
 	rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);
 #endif
-	if(*rtemp8 != 0xFF)		eFuse_Addr++;
-	while((*rtemp8 != 0xFF) && (eFuse_Addr < 512)){
+	if(*rtemp8 != 0xFF){
+		efuse_utilized++;
+		RT_TRACE(COMP_EPROM, "Addr=%d\n", eFuse_Addr);
+		eFuse_Addr++;
+	}
+
+	while((*rtemp8 != 0xFF) && (eFuse_Addr < EFUSE_REAL_CONTENT_LEN))
+	{
 		offset = ((*rtemp8 >> 4) & 0x0f);
-		if(offset <= 0x0F){
+		if(offset < EFUSE_MAX_SECTION)
+		{
 			wren = (*rtemp8 & 0x0f);
-			for(i=0; i<4; i++){
-				if(!(wren & 0x01)){
+			RT_TRACE(COMP_EPROM, "Offset-%d Worden=%x\n", offset, wren);
+
+			for(i = 0; i < EFUSE_MAX_WORD_UNIT; i++)
+			{
+				if(!(wren & 0x01))
+				{
+					RT_TRACE(COMP_EPROM, "Addr=%d\n", eFuse_Addr);
 #if (EFUSE_READ_SWITCH == 1)
 					ReadEFuseByte(dev, eFuse_Addr, rtemp8);	eFuse_Addr++;
 #else
 					rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
 #endif
+					efuse_utilized++;
 					eFuseWord[offset][i] = (*rtemp8 & 0xff);
-					if(eFuse_Addr >= 512) break;
+					if(eFuse_Addr >= EFUSE_REAL_CONTENT_LEN)
+						break;
+
+					RT_TRACE(COMP_EPROM, "Addr=%d\n", eFuse_Addr);
 #if (EFUSE_READ_SWITCH == 1)
 					ReadEFuseByte(dev, eFuse_Addr, rtemp8);	eFuse_Addr++;
 #else
 					rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
 #endif
+					efuse_utilized++;
 					eFuseWord[offset][i] |= (((u16)*rtemp8 << 8) & 0xff00);
-					if(eFuse_Addr >= 512) break;
+					if(eFuse_Addr >= EFUSE_REAL_CONTENT_LEN)
+						break;
 				}
 				wren >>= 1;
 			}
 		}
+
+		RT_TRACE(COMP_EPROM, "Addr=%d\n", eFuse_Addr);
 #if (EFUSE_READ_SWITCH == 1)
 		ReadEFuseByte(dev, eFuse_Addr, rtemp8);
 #else
 		rtemp8[0] = EFUSE_Read1Byte(dev, eFuse_Addr);	eFuse_Addr++;
 #endif
-		if(*rtemp8 != 0xFF && (eFuse_Addr < 512))	eFuse_Addr++;
+		if(*rtemp8 != 0xFF && (eFuse_Addr < 512))
+		{
+			efuse_utilized++;
+			eFuse_Addr++;
+		}
 	}
 
-	for(i=0; i<16; i++){
-		for(j=0; j<4; j++){
+	for(i=0; i<EFUSE_MAX_SECTION; i++)
+	{
+		for(j=0; j<EFUSE_MAX_WORD_UNIT; j++)
+		{
 			efuseTbl[(i*8)+(j*2)]=(eFuseWord[i][j] & 0xff);
 			efuseTbl[(i*8)+((j*2)+1)]=((eFuseWord[i][j] >> 8) & 0xff);
 		}
 	}
 	for(i=0; i<_size_byte; i++)
 		pbuf[i] = efuseTbl[_offset+i];
+
+	efuse_usage = (u8)((efuse_utilized*100)/EFUSE_REAL_CONTENT_LEN);
+	priv->EfuseUsedBytes = efuse_utilized;
+	priv->EfuseUsedPercentage = (u8)efuse_usage;
 }
-#endif	// #if (EFUSE_FOR_92SU == 1)
+#endif
+
+extern	bool
+EFUSE_ShadowUpdateChk(struct net_device* dev)
+{
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	u8	SectionIdx, i, Base;
+	u16	WordsNeed = 0, HdrNum = 0, TotalBytes = 0, EfuseUsed = 0;
+	bool	bWordChanged, bResult = true;
+
+	for (SectionIdx = 0; SectionIdx < 16; SectionIdx++)
+	{
+		Base = SectionIdx * 8;
+		bWordChanged = false;
+
+		for (i = 0; i < 8; i=i+2)
+		{
+			if((priv->EfuseMap[EFUSE_INIT_MAP][Base+i] !=
+				priv->EfuseMap[EFUSE_MODIFY_MAP][Base+i]) ||
+				(priv->EfuseMap[EFUSE_INIT_MAP][Base+i+1] !=
+				priv->EfuseMap[EFUSE_MODIFY_MAP][Base+i+1]))
+			{
+				WordsNeed++;
+				bWordChanged = true;
+			}
+		}
 
+		if( bWordChanged==true )
+			HdrNum++;
+	}
+
+	TotalBytes = HdrNum + WordsNeed*2;
+	EfuseUsed = priv->EfuseUsedBytes;
+
+	if( (TotalBytes + EfuseUsed) >= (EFUSE_MAX_SIZE-EFUSE_OOB_PROTECT_BYTES))
+		bResult = true;
+
+	RT_TRACE(COMP_EPROM, "EFUSE_ShadowUpdateChk(): TotalBytes(%x), HdrNum(%x), WordsNeed(%x), EfuseUsed(%d)\n",
+		TotalBytes, HdrNum, WordsNeed, EfuseUsed);
+
+	return bResult;
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_ShadowRead
@@ -624,8 +657,6 @@ ReadEFuse(struct net_device* dev, u16	 _offset, u16 _size_byte, u8 *pbuf)
 extern void
 EFUSE_ShadowRead(	struct net_device*	dev,	u8 Type, u16 Offset, u32 *Value)
 {
-	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
-
 	if (Type == 1)
 		efuse_ShadowRead1Byte(dev, Offset, (u8 *)Value);
 	else if (Type == 2)
@@ -633,8 +664,7 @@ EFUSE_ShadowRead(	struct net_device*	dev,	u8 Type, u16 Offset, u32 *Value)
 	else if (Type == 4)
 		efuse_ShadowRead4Byte(dev, Offset, (u32 *)Value);
 
-}	// EFUSE_ShadowRead
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_ShadowWrite
@@ -655,8 +685,6 @@ EFUSE_ShadowRead(	struct net_device*	dev,	u8 Type, u16 Offset, u32 *Value)
 extern	void
 EFUSE_ShadowWrite(	struct net_device*	dev,	u8 Type, u16 Offset,u32	Value)
 {
-	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
-
 	if (Offset >= 0x18 && Offset <= 0x1F)
 		return;
 
@@ -667,8 +695,7 @@ EFUSE_ShadowWrite(	struct net_device*	dev,	u8 Type, u16 Offset,u32	Value)
 	else if (Type == 4)
 		efuse_ShadowWrite4Byte(dev, Offset, (u32)Value);
 
-}	// EFUSE_ShadowWrite
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_ShadowUpdate
@@ -686,15 +713,25 @@ EFUSE_ShadowWrite(	struct net_device*	dev,	u8 Type, u16 Offset,u32	Value)
  * 11/12/2008 	MHC		Create Version 0.
  *
  *---------------------------------------------------------------------------*/
-extern	void
+extern bool
 EFUSE_ShadowUpdate(struct net_device* dev)
 {
-	//HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(pAdapter);
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u16			i, offset, base = 0;
 	u8			word_en = 0x0F;
-	bool first_pg = false;
-	// For Efuse write action, we must enable LDO2.5V and 40MHZ clk.
+	bool			first_pg = false;
+
+	RT_TRACE(COMP_EPROM, "--->EFUSE_ShadowUpdate()\n");
+
+	if(!EFUSE_ShadowUpdateChk(dev))
+	{
+		efuse_ReadAllMap(dev, &priv->EfuseMap[EFUSE_INIT_MAP][0]);
+		memcpy((void *)&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
+			(void *)&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+
+		RT_TRACE(COMP_EPROM, "<---EFUSE_ShadowUpdate(): Efuse out of capacity!!\n");
+		return false;
+	}
 	efuse_PowerSwitch(dev, TRUE);
 
 	//
@@ -712,16 +749,12 @@ EFUSE_ShadowUpdate(struct net_device* dev)
 		//
 		for (i = 0; i < 8; i++)
 		{
-			if (offset == 0 && priv->EfuseMap[EFUSE_INIT_MAP][base+i] == 0xFF)
-			{
-				first_pg = TRUE;
-			}
-
-			// 2008/12/11 MH HW autoload fail workaround for A/BCUT.
-
 			if (first_pg == TRUE)
 			{
 				word_en &= ~(1<<(i/2));
+				RT_TRACE(COMP_EPROM,"Section(%x) Addr[%x] %x update to %x, Word_En=%02x\n",
+				offset, base+i, priv->EfuseMap[EFUSE_INIT_MAP][base+i],
+				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i],word_en);
 				priv->EfuseMap[EFUSE_INIT_MAP][base+i] =
 				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i];
 			}else
@@ -730,8 +763,9 @@ EFUSE_ShadowUpdate(struct net_device* dev)
 				priv->EfuseMap[EFUSE_MODIFY_MAP][base+i])
 			{
 				word_en &= ~(EFUSE_BIT(i/2));
-				//RT_TRACE(COMP_EFUSE,  "Offset=%d Addr%x %x ==> %x Word_En=%02x\n",
-				//offset, base+i, priv->EfuseMap[0][base+i], priv->EfuseMap[1][base+i],word_en);
+				RT_TRACE(COMP_EPROM, "Section(%x) Addr[%x] %x update to %x, Word_En=%02x\n",
+				offset, base+i, priv->EfuseMap[0][base+i],
+				priv->EfuseMap[1][base+i],word_en);
 
 				// Update init table!!!
 				priv->EfuseMap[EFUSE_INIT_MAP][base+i] =
@@ -747,25 +781,27 @@ EFUSE_ShadowUpdate(struct net_device* dev)
 		{
 			u8	tmpdata[8];
 
-			//FIXLZM
-			memcpy(tmpdata, &(priv->EfuseMap[EFUSE_MODIFY_MAP][base]), 8);
-			//RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("U-EFUSE\n"), tmpdata, 8);
-			efuse_PgPacketWrite(dev,(u8)offset,word_en,tmpdata);
+			memcpy((void *)tmpdata, (void *)&(priv->EfuseMap[EFUSE_MODIFY_MAP][base]), 8);
+			RT_TRACE(COMP_INIT, "U-EFUSE\n");
+
+			if(!efuse_PgPacketWrite(dev,(u8)offset,word_en,tmpdata))
+			{
+				RT_TRACE(COMP_EPROM,"EFUSE_ShadowUpdate(): PG section(%x) fail!!\n", offset);
+				break;
+			}
 		}
 
 	}
-	// 2008/12/01 MH For Efuse HW load bug workarounf method!!!!
-	// We will force write 0x10EC into address 10&11 after all Efuse content.
-	//
-
-
 	// For warm reboot, we must resume Efuse clock to 500K.
+
 	efuse_PowerSwitch(dev, FALSE);
-	// 2008/12/01 MH We update shadow content again!!!!
-	EFUSE_ShadowMapUpdate(dev);
 
-}	// EFUSE_ShadowUpdate
+	efuse_ReadAllMap(dev, &priv->EfuseMap[EFUSE_INIT_MAP][0]);
+	memcpy((void *)&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
+		(void *)&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
 
+	return true;
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_ShadowMapUpdate
@@ -792,12 +828,10 @@ extern void EFUSE_ShadowMapUpdate(struct net_device* dev)
 	}else{
 		efuse_ReadAllMap(dev, &priv->EfuseMap[EFUSE_INIT_MAP][0]);
 	}
-	//PlatformMoveMemory(&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
-		//&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);//FIXLZM
-	memcpy(&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
-		&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
+	memcpy((void *)&priv->EfuseMap[EFUSE_MODIFY_MAP][0],
+		(void *)&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
 
-}	// EFUSE_ShadowMapUpdate
+}
 
 extern	void
 EFUSE_ForceWriteVendorId( struct net_device* dev)
@@ -810,7 +844,7 @@ EFUSE_ForceWriteVendorId( struct net_device* dev)
 
 	efuse_PowerSwitch(dev, FALSE);
 
-}	// EFUSE_ForceWriteVendorId
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_ShadowRead1Byte
@@ -837,7 +871,7 @@ efuse_ShadowRead1Byte(struct net_device*	dev,	u16 Offset,	u8 *Value)
 
 	*Value = priv->EfuseMap[EFUSE_MODIFY_MAP][Offset];
 
-}	// EFUSE_ShadowRead1Byte
+}
 
 //---------------Read Two Bytes
 static	void
@@ -848,7 +882,7 @@ efuse_ShadowRead2Byte(struct net_device*	dev,	u16 Offset,	u16 *Value)
 	*Value = priv->EfuseMap[EFUSE_MODIFY_MAP][Offset];
 	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1]<<8;
 
-}	// EFUSE_ShadowRead2Byte
+}
 
 //---------------Read Four Bytes
 static	void
@@ -861,7 +895,7 @@ efuse_ShadowRead4Byte(struct net_device*	dev,	u16 Offset,	u32 *Value)
 	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+2]<<16;
 	*Value |= priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+3]<<24;
 
-}	// efuse_ShadowRead4Byte
+}
 
 
 
@@ -890,7 +924,7 @@ efuse_ShadowWrite1Byte(struct net_device*	dev,	u16 Offset,	u8 Value)
 
 	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset] = Value;
 
-}	// efuse_ShadowWrite1Byte
+}
 
 //---------------Write Two Bytes
 static	void
@@ -901,7 +935,7 @@ efuse_ShadowWrite2Byte(struct net_device*	dev,	u16 Offset,	u16 Value)
 	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset] = Value&0x00FF;
 	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+1] = Value>>8;
 
-}	// efuse_ShadowWrite1Byte
+}
 
 //---------------Write Four Bytes
 static	void
@@ -914,10 +948,8 @@ efuse_ShadowWrite4Byte(struct net_device*	dev,	u16 Offset,	u32 Value)
 	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+2] = (u8)((Value>>16)&0x00FF);
 	priv->EfuseMap[EFUSE_MODIFY_MAP][Offset+3] = (u8)((Value>>24)&0xFF);
 
-}	// efuse_ShadowWrite1Byte
-
+}
 
-/*  11/16/2008 MH Read one byte from real Efuse. */
 static	u8
 efuse_OneByteRead(struct net_device* dev, u16 addr,u8 *data)
 {
@@ -947,7 +979,7 @@ efuse_OneByteRead(struct net_device* dev, u16 addr,u8 *data)
 		bResult = FALSE;
 	}
 	return bResult;
-}	// efuse_OneByteRead
+}
 
 /*  11/16/2008 MH Write one byte to reald Efuse. */
 static	u8
@@ -956,10 +988,6 @@ efuse_OneByteWrite(struct net_device* dev,  u16 addr, u8 data)
 	u8 tmpidx = 0;
 	u8 bResult;
 
-	//RT_TRACE(COMP_EFUSE, "Addr = %x Data=%x\n", addr, data);
-
-	//return	0;
-
 	// -----------------e-fuse reg ctrl ---------------------------------
 	//address
 	write_nic_byte(dev, EFUSE_CTRL+1, (u8)(addr&0xff));
@@ -983,8 +1011,7 @@ efuse_OneByteWrite(struct net_device* dev,  u16 addr, u8 data)
 	}
 
 	return bResult;
-}	// efuse_OneByteWrite
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_ReadAllMap
@@ -1005,19 +1032,13 @@ efuse_OneByteWrite(struct net_device* dev,  u16 addr, u8 data)
 static	void
 efuse_ReadAllMap(struct net_device*	dev, u8	*Efuse)
 {
-	//u8 	pg_data[8];
-	//u8 	offset = 0;
-	//u8 	tmpidx;
-	//static	u8	index = 0;
-
 	//
 	// We must enable clock and LDO 2.5V otherwise, read all map will be fail!!!!
 	//
 	efuse_PowerSwitch(dev, TRUE);
 	ReadEFuse(dev, 0, 128, Efuse);
 	efuse_PowerSwitch(dev, FALSE);
-}	// efuse_ReadAllMap
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_WriteAllMap
@@ -1057,18 +1078,11 @@ efuse_WriteAllMap(struct net_device* dev,u8 *eeprom, u32 eeprom_size)
 			// 0x18-1f Reserve >0x50 Reserve for tx power
 			if (offset == 3/* || offset > 9*/)
 				continue;//word_en = 0x0F;
-			//else if (offset == 9)	// 0x4c-4f Reserve
-				//word_en = 0x0C;
 			else
 				word_en = 0x00;
 		}
-		//RT_TRACE(COMP_EFUSE, ("Addr=%d size=%d Word_En=%02x\n", offset, eeprom_size, word_en));
 
-		//memcpy(tmpdata,eeprom+(offset*PGPKT_DATA_SIZE),8);
 		memcpy(tmpdata, (eeprom+(offset*PGPKT_DATA_SIZE)), 8);
-
-		//RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("EFUSE\t"), tmpdata, 8);
-
 		efuse_PgPacketWrite(dev,offset,word_en,tmpdata);
 
 
@@ -1077,7 +1091,7 @@ efuse_WriteAllMap(struct net_device* dev,u8 *eeprom, u32 eeprom_size)
 	// For warm reboot, we must resume Efuse clock to 500K.
 	efuse_PowerSwitch(dev, FALSE);
 
-}	// efuse_WriteAllMap
+}
 #endif
 
 /*-----------------------------------------------------------------------------
@@ -1114,15 +1128,9 @@ efuse_PgPacketRead(	struct net_device*	dev,	u8 offset, u8	*data)
 	if(data==NULL)	return FALSE;
 	if(offset>15)		return FALSE;
 
-	//FIXLZM
-	//PlatformFillMemory((PVOID)data, sizeof(u8)*PGPKT_DATA_SIZE, 0xff);
-	//PlatformFillMemory((PVOID)tmpdata, sizeof(u8)*PGPKT_DATA_SIZE, 0xff);
 	memset(data, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
 	memset(tmpdata, 0xff, sizeof(u8)*PGPKT_DATA_SIZE);
 
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("efuse_PgPacketRead-1\n"), data, 8);
-
-	//efuse_reg_ctrl(pAdapter,TRUE);//power on
 	while(bContinual && (efuse_addr  < EFUSE_MAX_SIZE) )
 	{
 		//-------  Header Read -------------
@@ -1169,9 +1177,6 @@ efuse_PgPacketRead(	struct net_device*	dev,	u8 offset, u8	*data)
 		}
 
 	}
-	//efuse_reg_ctrl(pAdapter,FALSE);//power off
-
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("efuse_PgPacketRead-2\n"), data, 8);
 
 	if(	(data[0]==0xff) &&(data[1]==0xff) && (data[2]==0xff)  && (data[3]==0xff) &&
 		(data[4]==0xff) &&(data[5]==0xff) && (data[6]==0xff)  && (data[7]==0xff))
@@ -1179,8 +1184,7 @@ efuse_PgPacketRead(	struct net_device*	dev,	u8 offset, u8	*data)
 	else
 		return TRUE;
 
-}	// efuse_PgPacketRead
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_PgPacketWrite
@@ -1200,7 +1204,7 @@ efuse_PgPacketRead(	struct net_device*	dev,	u8 offset, u8	*data)
  * 11/16/2008 	MHC		Reorganize code Arch and assign as local API.
  *
  *---------------------------------------------------------------------------*/
-static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *data)
+static u32 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *data)
 {
 	u8 WriteState = PG_STATE_HEADER;
 
@@ -1210,12 +1214,9 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 
 	u8 pg_header = 0;
 
-	//u16 tmp_addr=0;
 	u8 tmp_word_cnts=0,target_word_cnts=0;
 	u8 tmp_header,match_word_en,tmp_word_en;
 
-	//u8	efuse_clk_ori,efuse_clk_new;
-
 	PGPKT_STRUCT target_pkt;
 	PGPKT_STRUCT tmp_pkt;
 
@@ -1240,7 +1241,6 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 	efuse_WordEnableDataRead(word_en,data,target_pkt.data);
 	target_word_cnts = efuse_CalculateWordCnts(target_pkt.word_en);
 
-	//efuse_reg_ctrl(pAdapter,TRUE);//power on
 	printk("EFUSE Power ON\n");
 
 	while( bContinual && (efuse_addr  < EFUSE_MAX_SIZE) )
@@ -1312,14 +1312,12 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 							badworden = efuse_WordEnableDataWrite(dev,efuse_addr+1, tmp_pkt.word_en ,target_pkt.data);
 
 							//************  so-2-2-A-1 *******************
-							//############################
 							if(0x0F != (badworden&0x0F))
 							{
 								u8 reorg_offset = offset;
 								u8 reorg_worden=badworden;
 								efuse_PgPacketWrite(dev,reorg_offset,reorg_worden,originaldata);
 							}
-							//############################
 
 							tmp_word_en = 0x0F;
 							if(  (target_pkt.word_en&BIT0)^(match_word_en&BIT0)  )
@@ -1342,13 +1340,13 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 							//************  so-2-2-A-2 *******************
 							if((tmp_word_en&0x0F)!=0x0F){
 								//reorganize other pg packet
-								//efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr
-								efuse_addr = efuse_GetCurrentSize(dev);
-								//===========================
-								target_pkt.offset = offset;
+
+							efuse_addr = efuse_GetCurrentSize(dev);
+
+							target_pkt.offset = offset;
 								target_pkt.word_en= tmp_word_en;
-								//===========================
-							}else{
+
+						}else{
 								bContinual = FALSE;
 							}
 							#if (EFUSE_ERROE_HANDLE == 1)
@@ -1363,10 +1361,8 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 						else{//************  so-2-2-B *******************
 							//reorganize other pg packet
 							efuse_addr = efuse_addr + (2*tmp_word_cnts) +1;//next pg packet addr
-							//===========================
 							target_pkt.offset = offset;
 							target_pkt.word_en= target_pkt.word_en;
-							//===========================
 							#if (EFUSE_ERROE_HANDLE == 1)
 							WriteState=PG_STATE_HEADER;
 							#endif
@@ -1405,13 +1401,10 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 
 					//************  s1-2-A :cover the exist data *******************
 					memset(originaldata,0xff,sizeof(u8)*8);
-					//PlatformFillMemory((PVOID)originaldata, sizeof(u8)*8, 0xff);
 
 					if(efuse_PgPacketRead( dev, tmp_pkt.offset,originaldata))
 					{	//check if data exist
-						//efuse_reg_ctrl(pAdapter,TRUE);//power on
 						badworden = efuse_WordEnableDataWrite(dev,efuse_addr+1,tmp_pkt.word_en,originaldata);
-						//############################
 						if(0x0F != (badworden&0x0F))
 						{
 							u8 reorg_offset = tmp_pkt.offset;
@@ -1419,7 +1412,6 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 							efuse_PgPacketWrite(dev,reorg_offset,reorg_worden,originaldata);
 							efuse_addr = efuse_GetCurrentSize(dev);
 						}
-						//############################
 						else{
 							efuse_addr = efuse_addr + (tmp_word_cnts*2) +1; //Next pg_packet
 						}
@@ -1459,11 +1451,9 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 			{//reorganize other pg packet //************  s1-1-B *******************
 				efuse_addr = efuse_addr + (2*target_word_cnts) +1;//next pg packet addr
 
-				//===========================
 				target_pkt.offset = offset;
 				target_pkt.word_en= badworden;
 				target_word_cnts =  efuse_CalculateWordCnts(target_pkt.word_en);
-				//===========================
 				#if (EFUSE_ERROE_HANDLE == 1)
 				WriteState=PG_STATE_HEADER;
 				repeat_times++;
@@ -1477,11 +1467,12 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 		}
 	}
 
-	//efuse_reg_ctrl(pAdapter,FALSE);//power off
-
+	if(efuse_addr  >= (EFUSE_MAX_SIZE-EFUSE_OOB_PROTECT_BYTES))
+	{
+		RT_TRACE(COMP_EPROM, "efuse_PgPacketWrite(): efuse_addr(%x) Out of size!!\n", efuse_addr);
+	}
 	return TRUE;
-}	// efuse_PgPacketWrite
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_WordEnableDataRead
@@ -1503,12 +1494,6 @@ static u8 efuse_PgPacketWrite(struct net_device* dev, u8 offset, u8 word_en,u8 *
 static	void
 efuse_WordEnableDataRead(	u8 word_en,u8 *sourdata,u8 *targetdata)
 {
-	//u8 tmpindex = 0;
-
-	//DbgPrint("efuse_WordEnableDataRead word_en = %x\n", word_en);
-
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("sourdata\n"), sourdata, 8);
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("targetdata\n"), targetdata, 8);
 
 	if (!(word_en&BIT0))
 	{
@@ -1530,8 +1515,7 @@ efuse_WordEnableDataRead(	u8 word_en,u8 *sourdata,u8 *targetdata)
 		targetdata[6] = sourdata[6];//sourdata[tmpindex++];
 		targetdata[7] = sourdata[7];//sourdata[tmpindex++];
 	}
-}	// efuse_WordEnableDataRead
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_WordEnableDataWrite
@@ -1555,15 +1539,9 @@ efuse_WordEnableDataWrite(	struct net_device*	dev,	u16 efuse_addr, u8 word_en, u
 	u16 tmpaddr = 0;
 	u16 start_addr = efuse_addr;
 	u8 badworden = 0x0F;
-	//u8 NextState;
 	u8 tmpdata[8];
 
 	memset(tmpdata,0xff,PGPKT_DATA_SIZE);
-	//PlatformFillMemory((PVOID)tmpdata, PGPKT_DATA_SIZE, 0xff);
-
-	//RT_TRACE(COMP_EFUSE, "word_en = %x efuse_addr=%x\n", word_en, efuse_addr);
-
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("U-EFUSE\n"), data, 8);
 
 	if(!(word_en&BIT0))
 	{
@@ -1614,8 +1592,7 @@ efuse_WordEnableDataWrite(	struct net_device*	dev,	u16 efuse_addr, u8 word_en, u
 		}
 	}
 	return badworden;
-}	// efuse_WordEnableDataWrite
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_PowerSwitch
@@ -1658,8 +1635,7 @@ efuse_PowerSwitch(struct net_device* dev, u8 PwrState)
 		write_nic_byte(dev, EFUSE_CLK, 0x02);
 	}
 
-}	/* efuse_PowerSwitch */
-
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_GetCurrentSize
@@ -1686,8 +1662,6 @@ efuse_GetCurrentSize(struct net_device*	dev)
 	u8 hoffset=0,hworden=0;
 	u8 efuse_data,word_cnts=0;
 
-	//efuse_reg_ctrl(pAdapter,TRUE);//power on
-
 	while (	bContinual &&
 			efuse_OneByteRead(dev, efuse_addr ,&efuse_data) &&
 			(efuse_addr  < EFUSE_MAX_SIZE) )
@@ -1706,12 +1680,9 @@ efuse_GetCurrentSize(struct net_device*	dev)
 		}
 	}
 
-	//efuse_reg_ctrl(pAdapter,FALSE);//power off
-
 	return efuse_addr;
 
-}	// efuse_GetCurrentSize}
-
+}
 
 /*  11/16/2008 MH Add description. Get current efuse area enabled word!!. */
 static u8
@@ -1723,7 +1694,7 @@ efuse_CalculateWordCnts(u8	word_en)
 	if(!(word_en & BIT2))	word_cnts++;
 	if(!(word_en & BIT3))	word_cnts++;
 	return word_cnts;
-}	// efuse_CalculateWordCnts
+}
 
 /*-----------------------------------------------------------------------------
  * Function:	EFUSE_ProgramMap
@@ -1786,12 +1757,10 @@ EFUSE_ProgramMap(struct net_device* dev, char* pFileName,u8	TableType)
 				{
 					u32	j;
 
-					//GetHexValueFromString(szLine, &u4bRegValue, &u4bMove);
 					efuse_ParsingMap(szLine, &u4bRegValue, &u4bMove);
 
 					// Get next hex value as EEPROM value.
 					szLine += u4bMove;
-					//WriteEEprom(dev, (u16)(ithLine*8+i), (u16)u4bRegValue);
 					eeprom[index++] = (u8)(u4bRegValue&0xff);
 					eeprom[index++] = (u8)((u4bRegValue>>8)&0xff);
 
@@ -1808,9 +1777,6 @@ EFUSE_ProgramMap(struct net_device* dev, char* pFileName,u8	TableType)
 		return	RT_STATUS_FAILURE;
 	}
 
-
-	//RT_PRINT_DATA(COMP_EFUSE, DBG_LOUD, ("EFUSE "), eeprom, HWSET_MAX_SIZE_92S);
-
 	// Use map file to update real Efuse or shadow modify table.
 	if (TableType == 1)
 	{
@@ -1824,45 +1790,9 @@ EFUSE_ProgramMap(struct net_device* dev, char* pFileName,u8	TableType)
 	}
 
 	return	rtStatus;
-}	/* EFUSE_ProgramMap */
-
-#endif
-
-//
-//	Description:
-//		Return TRUE if chTmp is represent for hex digit and
-//		FALSE otherwise.
-//
-//
-bool IsHexDigit(	char chTmp)
-{
-	if( (chTmp >= '0' && chTmp <= '9') ||
-		(chTmp >= 'a' && chTmp <= 'f') ||
-		(chTmp >= 'A' && chTmp <= 'F') )
-	{
-		return TRUE;
-	}
-	else
-	{
-		return FALSE;
-	}
 }
 
-//
-//	Description:
-//		Translate a character to hex digit.
-//
-u32 MapCharToHexDigit(char chTmp)
-{
-	if(chTmp >= '0' && chTmp <= '9')
-		return (chTmp - '0');
-	else if(chTmp >= 'a' && chTmp <= 'f')
-		return (10 + (chTmp - 'a'));
-	else if(chTmp >= 'A' && chTmp <= 'F')
-		return (10 + (chTmp - 'A'));
-	else
-		return 0;
-}
+#endif
 
 /*-----------------------------------------------------------------------------
  * Function:	efuse_ParsingMap
@@ -1889,9 +1819,6 @@ efuse_ParsingMap(char* szStr,u32* pu4bVal,u32* pu4bMove)
 	// Check input parameter.
 	if(szStr == NULL || pu4bVal == NULL || pu4bMove == NULL)
 	{
-		//RT_TRACE(COMP_EFUSE,
-		//"eeprom_ParsingMap(): Invalid IN args! szStr: %p, pu4bVal: %p, pu4bMove: %p\n",
-		//szStr, pu4bVal, pu4bMove);
 		return FALSE;
 	}
 
@@ -1909,34 +1836,26 @@ efuse_ParsingMap(char* szStr,u32* pu4bVal,u32* pu4bMove)
 
 	// Check if szScan is now pointer to a character for hex digit,
 	// if not, it means this is not a valid hex number.
-	if(!IsHexDigit(*szScan))
-	{
+	if (!isxdigit(*szScan))
 		return FALSE;
-	}
 
 	// Parse each digit.
 	do
 	{
-		(*pu4bVal) <<= 4;
-		*pu4bVal += MapCharToHexDigit(*szScan);
+		*pu4bVal = (*pu4bVal << 4) + hex_to_bin(*szScan);
 
 		szScan++;
 		(*pu4bMove)++;
-	} while(IsHexDigit(*szScan));
+	} while (isxdigit(*szScan));
 
 	return TRUE;
 
-}	/* efuse_ParsingMap */
+}
 #endif
 
-//
-// Useless Section Code Now!!!!!!
-//
-// Porting from 8712 SDIO
 int efuse_one_byte_rw(struct net_device* dev, u8 bRead, u16 addr, u8 *data)
 {
 	u32 bResult;
-	//u8 efuse_ctlreg,tmpidx = 0;
 	u8 tmpidx = 0;
 	u8 tmpv8=0;
 
@@ -1965,7 +1884,6 @@ int efuse_one_byte_rw(struct net_device* dev, u8 bRead, u16 addr, u8 *data)
 
 	}
 	else{
-		//return	0;
 		write_nic_byte(dev, EFUSE_CTRL, *data);//data
 
 		write_nic_byte(dev, EFUSE_CTRL+3, 0xF2);//write cmd
@@ -1987,21 +1905,18 @@ int efuse_one_byte_rw(struct net_device* dev, u8 bRead, u16 addr, u8 *data)
 	}
 	return bResult;
 }
-//------------------------------------------------------------------------------
+
 void efuse_access(struct net_device* dev, u8 bRead,u16 start_addr, u8 cnts, u8 *data)
 {
 	u8	efuse_clk_ori,efuse_clk_new;//,tmp8;
 	u32 i = 0;
 
 	if(start_addr>0x200) return;
-	//RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,
-	//	("\n ===> efuse_access [start_addr=0x%x cnts:%d dataarray:0x%08x  Query Efuse].\n",start_addr,cnts,data));
 	// -----------------SYS_FUNC_EN Digital Core Vdd enable ---------------------------------
 	efuse_clk_ori = read_nic_byte(dev,SYS_FUNC_EN+1);
 	efuse_clk_new = efuse_clk_ori|0x20;
 
 	if(efuse_clk_new!= efuse_clk_ori){
-		//RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("====write 0x10250003=====\n"));
 		write_nic_byte(dev, SYS_FUNC_EN+1, efuse_clk_new);
 	}
 #ifdef _POWERON_DELAY_
@@ -2021,9 +1936,8 @@ void efuse_access(struct net_device* dev, u8 bRead,u16 start_addr, u8 cnts, u8 *
 	//-----------------e-fuse one byte read / write ------------------------------
 	for(i=0;i<cnts;i++){
 		efuse_one_byte_rw(dev,bRead, start_addr+i , data+i);
-		////RT_TRACE(_module_rtl871x_mp_ioctl_c_,_drv_err_,("==>efuse_access addr:0x%02x value:0x%02x\n",data+i,*(data+i)));
+
 	}
-	// -----------------e-fuse pwr & clk reg ctrl ---------------------------------
 	write_nic_byte(dev, EFUSE_TEST+3, read_nic_byte(dev, EFUSE_TEST+3)&0x7f);
 	write_nic_byte(dev, EFUSE_CLK_CTRL, read_nic_byte(dev, EFUSE_CLK_CTRL)&0xfd);
 
@@ -2031,8 +1945,6 @@ void efuse_access(struct net_device* dev, u8 bRead,u16 start_addr, u8 cnts, u8 *
 	if(efuse_clk_new != efuse_clk_ori)	write_nic_byte(dev, 0x10250003, efuse_clk_ori);
 
 }
-//------------------------------------------------------------------------------
-//------------------------------------------------------------------------------
 
 #ifdef TO_DO_LIST
 static	void efuse_reg_ctrl(struct net_device* dev, u8 bPowerOn)
@@ -2060,15 +1972,12 @@ static	void efuse_reg_ctrl(struct net_device* dev, u8 bPowerOn)
 		write_nic_byte(dev, EFUSE_CLK_CTRL, read_nic_byte(dev, EFUSE_CLK_CTRL)&0xfd);
 		// -----------------SYS_FUNC_EN Digital Core Vdd disable ---------------------------------
 
-		//write_nic_byte(pAdapter, SYS_FUNC_EN+1,  read_nic_byte(pAdapter,SYS_FUNC_EN+1)&0xDF);
 	}
 
 
 }
 #endif
-//------------------------------------------------------------------------------
 
-//------------------------------------------------------------------------------
 void efuse_read_data(struct net_device* dev,u8 efuse_read_item,u8 *data,u32 data_size)
 {
 	u8 offset, word_start,byte_start,byte_cnts;
@@ -2079,10 +1988,8 @@ void efuse_read_data(struct net_device* dev,u8 efuse_read_item,u8 *data,u32 data
 
 	u8 tmpidx;
 	u8 pg_data[8];
-	//u8	temp_value[8] = {0xff};
 
 	if(efuse_read_item>  (sizeof(RTL8712_SDIO_EFUSE_TABLE)/sizeof(EFUSE_MAP))){
-		//error msg
 		return ;
 	}
 
@@ -2092,48 +1999,39 @@ void efuse_read_data(struct net_device* dev,u8 efuse_read_item,u8 *data,u32 data
 	byte_cnts   	= RTL8712_SDIO_EFUSE_TABLE[efuse_read_item].byte_cnts;
 
 	if(data_size!=byte_cnts){
-		//error msg
 		return;
 	}
 
 	pg_pkt_cnts = (byte_cnts /PGPKT_DATA_SIZE) +1;
 
 	if(pg_pkt_cnts > 1){
-		//tmpdata = _malloc(pg_pkt_cnts*PGPKT_DATA_SIZE);
 		tmpdata = efusedata;
 
 		if(tmpdata!=NULL)
 		{
 			memset(tmpdata,0xff,pg_pkt_cnts*PGPKT_DATA_SIZE);
-			//PlatformFillMemory((PVOID)pg_data, pg_pkt_cnts*PGPKT_DATA_SIZE, 0xff);
 
 			for(tmpidx=0;tmpidx<pg_pkt_cnts;tmpidx++)
 			{
 				memset(pg_data,0xff,PGPKT_DATA_SIZE);
-				//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
 				if(TRUE== efuse_PgPacketRead(dev,offset+tmpidx,pg_data))
 				{
 					memcpy(tmpdata+(PGPKT_DATA_SIZE*tmpidx),pg_data,PGPKT_DATA_SIZE);
-					//PlatformMoveMemory((PVOID)(tmpdata+(PGPKT_DATA_SIZE*tmpidx)), (PVOID)pg_data, PGPKT_DATA_SIZE);
 				}
 			}
 			memcpy(data,(tmpdata+ (2*word_start)+byte_start ),data_size);
-			//PlatformMoveMemory((PVOID)data, (PVOID)(tmpdata+ (2*word_start)+byte_start ), data_size);
-			//_mfree(tmpdata, pg_pkt_cnts*PGPKT_DATA_SIZE);
 		}
 	}
 	else
 	{
 		memset(pg_data,0xff,PGPKT_DATA_SIZE);
-		//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
 		if(TRUE==efuse_PgPacketRead(dev,offset,pg_data)){
 			memcpy(data,pg_data+ (2*word_start)+byte_start ,data_size);
-			//PlatformMoveMemory((PVOID)data, (PVOID)(pg_data+ (2*word_start)+byte_start), data_size);
 		}
 	}
 
 }
-//------------------------------------------------------------------------------
+
 //per interface doesn't alike
 void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 data_size,u32 bWordUnit)
 {
@@ -2145,7 +2043,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 	u8 pg_data[8],tmpbytes=0;
 
 	if(efuse_write_item>  (sizeof(RTL8712_SDIO_EFUSE_TABLE)/sizeof(EFUSE_MAP))){
-		//error msg
 		return ;
 	}
 
@@ -2155,7 +2052,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 	byte_cnts   	= RTL8712_SDIO_EFUSE_TABLE[efuse_write_item].byte_cnts;
 
 	if(data_size >  byte_cnts){
-		//error msg
 		return;
 	}
 	pg_pkt_cnts = (byte_cnts /PGPKT_DATA_SIZE) +1;
@@ -2168,13 +2064,11 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 
 		if((efuse_write_item==EFUSE_F0CIS)||(efuse_write_item==EFUSE_F1CIS)){
 			memset(pg_data,0xff,PGPKT_DATA_SIZE);
-			//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
 			efuse_PgPacketRead(dev,offset,pg_data);
 
 			if(efuse_write_item==EFUSE_F0CIS){
 				word_en = 0x07;
 				memcpy(pg_data+word_start*2+byte_start,data,sizeof(u8)*2);
-				//PlatformMoveMemory((PVOID)(pg_data+word_start*2+byte_start), (PVOID)data, sizeof(u8)*2);
 				efuse_PgPacketWrite(dev,offset,word_en,pg_data+(word_start*2));
 
 				word_en = 0x00;
@@ -2183,7 +2077,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 				word_en = 0x00;
 				efuse_PgPacketRead(dev,offset+2,pg_data);
 				memcpy(pg_data,data+2+8,sizeof(u8)*7);
-				//PlatformMoveMemory((PVOID)(pg_data), (PVOID)(data+2+8), sizeof(u8)*7);
 
 				efuse_PgPacketWrite(dev,(offset+2),word_en,pg_data);
 			}
@@ -2202,7 +2095,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 		}
 		else{
 			memset(pg_data,0xff,PGPKT_DATA_SIZE);
-			//PlatformFillMemory((PVOID)pg_data, PGPKT_DATA_SIZE, 0xff);
 			if((efuse_write_item==EFUSE_SDIO_SETTING)||(efuse_write_item==EFUSE_CCCR)){
 				word_en = 0x0e ;
 				tmpbytes = 2;
@@ -2221,12 +2113,10 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 			}
 			if(bWordUnit==TRUE){
 				memcpy(pg_data+word_start*2 ,data,sizeof(u8)*tmpbytes);
-				//PlatformMoveMemory((PVOID)(pg_data+word_start*2), (PVOID)(data), sizeof(u8)*tmpbytes);
 			}
 			else{
 				efuse_PgPacketRead(dev,offset,pg_data);
 				memcpy(pg_data+(2*word_start)+byte_start,data,sizeof(u8)*byte_cnts);
-				//PlatformMoveMemory((PVOID)(pg_data+(2*word_start)+byte_start), (PVOID)(data), sizeof(u8)*byte_cnts);
 			}
 
 			efuse_PgPacketWrite(dev,offset,word_en,pg_data+(word_start*2));
@@ -2234,7 +2124,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 		}
 
 	}
-	//========================================================================
 	else if(pg_pkt_cnts>1){//situation B
 		if(word_start==0){
 			word_en = 0x00;
@@ -2255,7 +2144,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 
 		}
 	}
-	//========================================================================
 	else{//situation C
 		word_en = 0x0f;
 		for(tmpidx= 0; tmpidx<word_cnts ; tmpidx++)
@@ -2267,7 +2155,6 @@ void efuse_write_data(struct net_device* dev,u8 efuse_write_item,u8 *data,u32 da
 	}
 
 }
-//------------------------------------------------------------------------------
 
 void efuset_test_func_read(struct net_device* dev)
 {
@@ -2288,7 +2175,6 @@ void efuset_test_func_read(struct net_device* dev)
 	memset(txpowertable,0,sizeof(u8)*28);
 	efuse_read_data(dev,EFUSE_TXPW_TAB,txpowertable,sizeof(txpowertable));
 }
-//------------------------------------------------------------------------------
 
 void efuset_test_func_write(struct net_device* dev)
 {
@@ -2311,19 +2197,3 @@ void efuset_test_func_write(struct net_device* dev)
 	efuse_write_data(dev,EFUSE_SDIO_SETTING,tmpdata,sizeof(tmpdata),bWordUnit);
 
 }
-//------------------------------------------------------------------------------
-
-
-
-
-
-
-
-
-
-
-/* End of Efuse.c */
-
-
-
-
diff --git a/drivers/staging/rtl8192su/r8192S_Efuse.h b/drivers/staging/rtl8192su/r8192S_Efuse.h
index 1e50153ba02..c48a11bc06f 100644
--- a/drivers/staging/rtl8192su/r8192S_Efuse.h
+++ b/drivers/staging/rtl8192su/r8192S_Efuse.h
@@ -1,39 +1,38 @@
 /******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
  *
- *     (c) Copyright  2008, RealTEK Technologies Inc. All Rights Reserved.
+ * Based on the r8180 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
  *
- * Module:	Efuse.h	( Header File)
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  *
- * Note:
- *
- * Function:
- *
- * Export:
- *
- * Abbrev:
- *
- * History:
- * Data			Who		Remark
- *
- * 09/23/2008	MHC		Porting Efuse R/W API from WMAC.
- * 11/10/2008	MHC		Porting Efuse.h from 8712 SDIO.
- *						1. We muse redefine the header file to fit our coding
- *						   style.
- *						2. THe API we export to other module, we must redefine
- *						   for 8192S series.
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
  *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
 ******************************************************************************/
-/* Check to see if the file has been included already.  */
 
 #ifndef __INC_EFUSE_H
 #define __INC_EFUSE_H
 
-// Roger porting for 8192SU
 #define		EFUSE_FOR_92SU		1
 
-/*--------------------------Define Parameters-------------------------------*/
 #define		EFUSE_MAC_LEN					0x200
+#define		EFUSE_REAL_CONTENT_LEN		512
+#define		EFUSE_MAP_LEN					128
+#define		EFUSE_MAX_SECTION			16
+#define		EFUSE_MAX_WORD_UNIT			4
 
 #define		EFUSE_INIT_MAP				0
 #define		EFUSE_MODIFY_MAP				1
@@ -41,7 +40,6 @@
 #define		EFUSE_CLK_CTRL			EFUSE_CTRL
 #define 	EFUSE_BIT(x)  (1 << (x))
 
-// From 8712!!!!!!!!
 #define		PG_STATE_HEADER 	0x01
 #define		PG_STATE_WORD_0		0x02
 #define		PG_STATE_WORD_1		0x04
@@ -52,23 +50,6 @@
 #define		PG_SWBYTE_H			0x01
 #define		PG_SWBYTE_L			0x02
 
-/*--------------------------Define Parameters-------------------------------*/
-
-
-/*------------------------------Define structure----------------------------*/
-
-/*------------------------------Define structure----------------------------*/
-
-
-/*------------------------Export global variable----------------------------*/
-/*------------------------Export global variable----------------------------*/
-
-/*------------------------Export Marco Definition---------------------------*/
-
-/*------------------------Export Marco Definition---------------------------*/
-
-
-/*--------------------------Exported Function prototype---------------------*/
 extern	void
 EFUSE_Initialize(struct net_device* dev);
 extern	u8
@@ -81,21 +62,18 @@ extern 	void
 ReadEFuse(struct net_device* dev,u16 _offset,u16 _size_byte,u8* pbuf);
 extern	void
 ReadEFuseByte(struct net_device* dev,u16  _offset,u8  *pbuf);
-#endif	// #if (EFUSE_FOR_92SU == 1)
+#endif
 
 extern	void
 EFUSE_ShadowRead(struct net_device* dev,unsigned char Type,unsigned short Offset,u32 *Value);
 extern	void
 EFUSE_ShadowWrite(struct net_device* dev,unsigned char Type,unsigned short Offset,u32 Value);
-extern	void
+extern	bool
 EFUSE_ShadowUpdate(struct net_device* dev);
 extern	void
 EFUSE_ShadowMapUpdate(struct net_device* dev);
 
 extern	bool
 EFUSE_ProgramMap(struct net_device* dev,char* pFileName, u8 TableType);		// 0=Shadow 1=Real Efuse
-/*--------------------------Exported Function prototype---------------------*/
-
-/* End of Efuse.h */
 
-#endif //__INC_EFUSE_H
+#endif
diff --git a/drivers/staging/rtl8192su/r8192S_firmware.c b/drivers/staging/rtl8192su/r8192S_firmware.c
index 5036d547d5d..db0d2d5fc61 100644
--- a/drivers/staging/rtl8192su/r8192S_firmware.c
+++ b/drivers/staging/rtl8192su/r8192S_firmware.c
@@ -1,16 +1,22 @@
-/**************************************************************************************************
- * Procedure:    Init boot code/firmware code/data session
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
  *
- * Description: This routine will intialize firmware. If any error occurs during the initialization
- * 		process, the routine shall terminate immediately and return fail.
- *		NIC driver should call NdisOpenFile only from MiniportInitialize.
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  *
- * Arguments:   The pointer of the adapter
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 
- * Returns:
- *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
- *        NDIS_STATUS_SUCCESS - if firmware initialization process success
-**************************************************************************************************/
 #include "r8192U.h"
 #include "r8192S_firmware.h"
 #include <linux/unistd.h>
diff --git a/drivers/staging/rtl8192su/r8192S_firmware.h b/drivers/staging/rtl8192su/r8192S_firmware.h
index 2c2cf8032de..7f268a8de5e 100644
--- a/drivers/staging/rtl8192su/r8192S_firmware.h
+++ b/drivers/staging/rtl8192su/r8192S_firmware.h
@@ -1,44 +1,32 @@
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #ifndef __INC_FIRMWARE_H
 #define __INC_FIRMWARE_H
 
 
-//#define RTL8190_CPU_START_OFFSET	0x80
-/* TODO: this definition is TBD */
-//#define USB_HWDESC_HEADER_LEN	0
-
-/* It should be double word alignment */
-//#if DEV_BUS_TYPE==PCI_INTERFACE
-//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	4*(v/4) - 8
-//#else
-//#define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
-//#endif
-
-//typedef enum _firmware_init_step{
-//	FW_INIT_STEP0_BOOT = 0,
-//	FW_INIT_STEP1_MAIN = 1,
-//	FW_INIT_STEP2_DATA = 2,
-//}firmware_init_step_e;
-
-//typedef enum _DESC_PACKET_TYPE{
-//	DESC_PACKET_TYPE_INIT = 0,
-//	DESC_PACKET_TYPE_NORMAL = 1,
-//}DESC_PACKET_TYPE;
-#define	RTL8192S_FW_PKT_FRAG_SIZE		0xFF00	// 64K
-
-
 #define 	RTL8190_MAX_FIRMWARE_CODE_SIZE	64000	//64k
 #define	MAX_FIRMWARE_CODE_SIZE	0xFF00 // Firmware Local buffer size.
 #define 	RTL8190_CPU_START_OFFSET			0x80
-
+#define	RTL8192S_FW_PKT_FRAG_SIZE		0x4000
 #define GET_COMMAND_PACKET_FRAG_THRESHOLD(v)	(4*(v/4) - 8 - USB_HWDESC_HEADER_LEN)
 
-//typedef enum _DESC_PACKET_TYPE{
-//	DESC_PACKET_TYPE_INIT = 0,
-//	DESC_PACKET_TYPE_NORMAL = 1,
-//}DESC_PACKET_TYPE;
 
-// Forward declaration.
-//typedef	struct _ADAPTER	ADAPTER, *PADAPTER;
 #ifdef RTL8192S
 typedef enum _firmware_init_step{
 	FW_INIT_STEP0_IMEM = 0,
@@ -64,17 +52,8 @@ typedef enum _opt_rst_type{
 	OPT_FIRMWARE_RESET = 1,
 }opt_rst_type_e;
 
-/*typedef enum _FIRMWARE_STATUS{
-	FW_STATUS_0_INIT = 0,
-	FW_STATUS_1_MOVE_BOOT_CODE = 1,
-	FW_STATUS_2_MOVE_MAIN_CODE = 2,
-	FW_STATUS_3_TURNON_CPU = 3,
-	FW_STATUS_4_MOVE_DATA_CODE = 4,
-	FW_STATUS_5_READY = 5,
-}FIRMWARE_STATUS;
-*/
 //--------------------------------------------------------------------------------
-// RTL8192S Firmware related, Revised by Roger, 2008.12.18.
+// RTL8192S Firmware related
 //--------------------------------------------------------------------------------
 typedef  struct _RT_8192S_FIRMWARE_PRIV { //8-bytes alignment required
 
@@ -181,7 +160,6 @@ typedef enum _FIRMWARE_8192S_STATUS{
 typedef struct _rt_firmware{
 	PRT_8192S_FIRMWARE_HDR	pFwHeader;
 	FIRMWARE_8192S_STATUS	FWStatus;
-	u16             FirmwareVersion;
 	u8		FwIMEM[RTL8190_MAX_FIRMWARE_CODE_SIZE];
 	u8		FwEMEM[RTL8190_MAX_FIRMWARE_CODE_SIZE];
 	u32		FwIMEMLen;
@@ -189,11 +167,43 @@ typedef struct _rt_firmware{
 	u8		szFwTmpBuffer[164000];
         u32             szFwTmpBufferLen;
 	u16		CmdPacketFragThresold;
+	u16		FirmwareVersion;
 }rt_firmware, *prt_firmware;
 
-//typedef struct _RT_FIRMWARE_INFO_8192SU{
-//	u8		szInfo[16];
-//}RT_FIRMWARE_INFO_8192SU, *PRT_FIRMWARE_INFO_8192SU;
+#define		FW_DIG_ENABLE_CTL			BIT0
+#define		FW_HIGH_PWR_ENABLE_CTL		BIT1
+#define		FW_SS_CTL						BIT2
+#define		FW_RA_INIT_CTL				BIT3
+#define		FW_RA_BG_CTL					BIT4
+#define		FW_RA_N_CTL					BIT5
+#define		FW_PWR_TRK_CTL				BIT6
+#define		FW_IQK_CTL						BIT7
+#define		FW_ANTENNA_SW				BIT8
+#define		FW_DISABLE_ALL_DM			0
+
+#define		FW_PWR_TRK_PARAM_CLR		0x0000ffff
+#define		FW_RA_PARAM_CLR				0xffff0000
+
+#define	FW_CMD_IO_CLR(_pdev, _Bit)		\
+	udelay(1000);		\
+	((struct r8192_priv *)ieee80211_priv(_pdev))->FwCmdIOMap &= (~_Bit);
+
+#define	FW_CMD_IO_UPDATE(_pdev, _val)		\
+	((struct r8192_priv *)ieee80211_priv(_pdev))->FwCmdIOMap = _val;
+
+#define		FW_CMD_IO_SET(_pdev, _val) 	\
+	write_nic_word(_pdev, LBUS_MON_ADDR, (u16)_val);	\
+	FW_CMD_IO_UPDATE(_pdev, _val);
+
+#define		FW_CMD_PARA_SET(_pdev, _val) 		\
+	write_nic_dword(_pdev, LBUS_ADDR_MASK, _val);	\
+	((struct r8192_priv *)ieee80211_priv(_pdev))->FwCmdIOParam = _val;
+
+#define		FW_CMD_IO_QUERY(_pdev)	(u16)(((struct r8192_priv *)ieee80211_priv(_pdev))->FwCmdIOMap)
+#define	FW_CMD_IO_PARA_QUERY(_pdev)	(u32)(((struct r8192_priv *)ieee80211_priv(_pdev))->FwCmdIOParam)
+
+
+
 bool FirmwareDownload92S(struct net_device *dev);
 
 #endif
diff --git a/drivers/staging/rtl8192su/r8192S_hw.h b/drivers/staging/rtl8192su/r8192S_hw.h
index 82ea96b6f4d..e62b79df5ba 100644
--- a/drivers/staging/rtl8192su/r8192S_hw.h
+++ b/drivers/staging/rtl8192su/r8192S_hw.h
@@ -1,25 +1,22 @@
-/*****************************************************************************
- *	Copyright(c) 2008,  RealTEK Technology Inc. All Right Reserved.
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
  *
- * Module:	__INC_HAL8192SEREG_H
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
- * Note:	1. Define Mac register address and corresponding bit mask map
- *			2. CCX register
- *			3. Backward compatible register with useless address.
- *			4. Define 92SU required register address and definition.
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
  *
- *
- * Export:	Constants, macro, functions(API), global variables(None).
- *
- * Abbrev:
- *
- * History:
- *		Data		Who		Remark
- *      08/07/2007  MHC    	1. Porting from 9x series PHYCFG.h.
- *							2. Reorganize code architecture.
- *
- *****************************************************************************/
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
+
 #ifndef R8192S_HW
 #define R8192S_HW
 
@@ -29,21 +26,14 @@ typedef enum _VERSION_8192S{
 	VERSION_8192S_CCUT
 }VERSION_8192S,*PVERSION_8192S;
 
-//#ifdef RTL8192SU
 typedef enum _VERSION_8192SUsb{
 	VERSION_8192SU_A, //A-Cut
 	VERSION_8192SU_B, //B-Cut
 	VERSION_8192SU_C, //C-Cut
 }VERSION_8192SUsb, *PVERSION_8192SUsb;
-//#else
-typedef enum _VERSION_819xU{
-	VERSION_819xU_A, // A-cut
-	VERSION_819xU_B, // B-cut
-	VERSION_819xU_C,// C-cut
-}VERSION_819xU,*PVERSION_819xU;
-//#endif
-
-/* 2007/11/15 MH Define different RF type. */
+
+
+/* RF type. */
 typedef	enum _RT_RF_TYPE_DEFINITION
 {
 	RF_1T2R = 0,
@@ -51,9 +41,6 @@ typedef	enum _RT_RF_TYPE_DEFINITION
 	RF_2T2R,
 	RF_1T1R,
 	RF_2T2R_GREEN,
-	//RF_3T3R,
-	//RF_3T4R,
-	//RF_4T4R,
 	RF_819X_MAX_TYPE
 }RT_RF_TYPE_DEF_E;
 
@@ -68,12 +55,10 @@ typedef enum _BaseBand_Config_Type{
 #define	RTL8187_REQ_SET_REGS	0x05
 
 #define MAX_TX_URB 5
-#define MAX_RX_URB 16
+#define MAX_RX_URB 8
 
 #define R8180_MAX_RETRY 255
-//#define MAX_RX_NORMAL_URB 3
-//#define MAX_RX_COMMAND_URB 2
-#define RX_URB_SIZE 		9100
+#define RX_URB_SIZE 		0x4000
 
 #define BB_ANTATTEN_CHAN14	0x0c
 #define BB_ANTENNA_B 		0x40
@@ -134,7 +119,6 @@ typedef enum _BaseBand_Config_Type{
 #define MSR_LINK_ENEDCA	   	(1<<4)
 
 
-//#define Cmd9346CR_9356SEL	(1<<4)
 #define EPROM_CMD_RESERVED_MASK 			(1<<5)
 #define EPROM_CMD_OPERATING_MODE_SHIFT 	6
 #define EPROM_CMD_OPERATING_MODE_MASK 	((1<<7)|(1<<6))
@@ -147,13 +131,6 @@ typedef enum _BaseBand_Config_Type{
 #define EPROM_W_SHIFT 			1
 #define EPROM_R_SHIFT 			0
 
-//#define	MAC0 			 0x000,
-//#define	MAC1 			 0x001,
-//#define	MAC2 			 0x002,
-//#define	MAC3 			 0x003,
-//#define	MAC4 			 0x004,
-//#define	MAC5 			 0x005,
-
 //============================================================
 //       8192S Regsiter offset definition
 //============================================================
@@ -529,14 +506,6 @@ typedef enum _BaseBand_Config_Type{
 // USB RPWM register
 #define	USB_RPWM			0xFE58
 
-//FIXLZM SVN_BRACH NOT MOD HERE, IF MOD RX IS LITTLE LOW
-//#if ((HAL_CODE_BASE == RTL8192_S) &&  (DEV_BUS_TYPE==PCI_INTERFACE))
-//#define	RPWM		PCI_RPWM
-//#elif ((HAL_CODE_BASE == RTL8192_S) &&  (DEV_BUS_TYPE==USB_INTERFACE))
-//#define	RPWM		USB_RPWM
-//#endif
-
-
 //============================================================================
 //       8190 Regsiter offset definition
 //============================================================================
@@ -777,13 +746,11 @@ typedef enum _BaseBand_Config_Type{
 #define		RCR_MXDMA_OFFSET		8
 #define		RCR_FIFO_OFFSET		13
 
-//in 92U FIXLZM
-//#ifdef RTL8192U
 #define RCR_ONLYERLPKT		BIT31			// Early Receiving based on Packet Size.
 #define RCR_ENCS2			BIT30			// Enable Carrier Sense Detection Method 2
 #define RCR_ENCS1			BIT29			// Enable Carrier Sense Detection Method 1
 #define RCR_ACKTXBW			(BIT24|BIT25)		// TXBW Setting of ACK frames
-//#endif
+
 //----------------------------------------------------------------------------
 //       8192S (MSR) Media Status Register	(Offset 0x4C, 8 bits)
 //----------------------------------------------------------------------------
@@ -1259,17 +1226,18 @@ Default: 00b.
 #define		EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
 #define		EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
 #define		EEPROM_CHANNEL_PLAN_BY_HW_MASK	0x80
+#define 	EEPROM_CID_DEFAULT			0x0
+#define 	EEPROM_CID_ALPHA			0x1
+#define 	EEPROM_CID_Senao			0x3
+#define		EEPROM_CID_CAMEO			0X8
+#define 	EEPROM_CID_SITECOM			0x9
+#define 	EEPROM_CID_COREGA			0xB
+#define 	EEPROM_CID_EDIMAX_BELKIN		0xC
+#define		EEPROM_CID_SERCOMM_BELKIN		0xE
+#define		EEPROM_CID_CAMEO1			0xF
+#define 	EEPROM_CID_WHQL 			0xFE
+#define		EEPROM_CID_NetCore			0x5
 
-#define 		EEPROM_CID_DEFAULT				0x0
-#define 		EEPROM_CID_ALPHA				0x1
-#define		EEPROM_CID_CAMEO					0X8
-#define 		EEPROM_CID_SITECOM				0x9
-
-//#define EEPROM_CID_RUNTOP						0x2
-//#define EEPROM_CID_Senao						0x3
-//#define EEPROM_CID_TOSHIBA						0x4
-//#define EEPROM_CID_NetCore						0x5
-#define 		EEPROM_CID_WHQL 				0xFE // added by chiyoko for dtm, 20090108
 
 //-----------------------------------------------------------------
 // 0x2c0 FW Command Control register definition, added by Roger, 2008.11.27.
@@ -1282,18 +1250,32 @@ Default: 00b.
 #define		FW_HIGH_PWR_ENABLE			0xfd000009
 #define		FW_TXPWR_TRACK_ENABLE		0xfd000017
 #define		FW_TXPWR_TRACK_DISABLE		0xfd000018
-#define		FW_RA_RESET					0xfd0000af
-#define		FW_RA_ACTIVE					0xfd0000a6
+#define		FW_TXPWR_TRACK_THERMAL		0xfd000019
+#define		FW_RA_INIT						0xfd000026
+#define		FW_RA_IOT_BG_COMB			0xfd000030
+#define		FW_RA_IOT_N_COMB				0xfd000031
 #define		FW_RA_REFRESH					0xfd0000a0
-#define		FW_RA_ENABLE_BG				0xfd0000ac
+#define		FW_RA_DISABLE					0xfd0000a4
+#define		FW_RA_ACTIVE					0xfd0000a6
+#define		FW_RA_DISABLE_RSSI_MASK		0xfd0000ac
+#define		FW_RA_ENABLE_RSSI_MASK		0xfd0000ad
+#define		FW_RA_RESET					0xfd0000af
+#define		FW_DM_DISABLE					0xfd00aa00
 #define		FW_IQK_ENABLE					0xf0000020
 #define		FW_IQK_SUCCESS				0x0000dddd
 #define		FW_IQK_FAIL					0x0000ffff
 #define		FW_OP_FAILURE					0xffffffff
-#define		FW_DM_DISABLE					0xfd00aa00
+#define		FW_TX_FEEDBACK_NONE				0xfb000000
+#define		FW_TX_FEEDBACK_DTM_ENABLE		(FW_TX_FEEDBACK_NONE | 0x1)
+#define		FW_TX_FEEDBACK_CCX_ENABLE		(FW_TX_FEEDBACK_NONE | 0x2)
 #define		FW_BB_RESET_ENABLE			0xff00000d
 #define		FW_BB_RESET_DISABLE			0xff00000e
-
+#define		FW_LPS_ENTER					0xfe000010
+#define		FW_LPS_LEAVE					0xfe000011
+#define		FW_INDIRECT_READ				0xf2000000
+#define		FW_INDIRECT_WRITE				0xf2000001
+#define		FW_TXANT_SWITCH_ENABLE		0xfd000023
+#define		FW_TXANT_SWITCH_DISABLE		0xfd000024
 //
 //--------------92SU require delete or move to other place later
 //
@@ -1460,34 +1442,4 @@ Default: 00b.
 #define		HAL_8192S_HW_GPIO_OFF_MASK	0xF7
 #define		HAL_8192S_HW_GPIO_WPS_BIT	BIT4
 
-#endif  //R8192S_HW
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+#endif
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c
index b6c0f199074..a5fc2d1cb06 100644
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -1,35 +1,20 @@
 /******************************************************************************
-
-     (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
-
- Module:	hal8192sphy.c
-
- Note:		Merge 92SE/SU PHY config as below
-			1. BB register R/W API
- 			2. RF register R/W API
- 			3. Initial BB/RF/MAC config by reading BB/MAC/RF txt.
- 			3. Power setting API
- 			4. Channel switch API
- 			5. Initial gain switch API.
- 			6. Other BB/MAC/RF API.
-
- Function:	PHY: Extern function, phy: local function
-
- Export:	PHY_FunctionName
-
- Abbrev:	NONE
-
- History:
-	Data		Who		Remark
-	08/08/2008  MHC    	1. Port from 9x series phycfg.c
-						2. Reorganize code arch and ad description.
-						3. Collect similar function.
-						4. Seperate extern/local API.
-	08/12/2008	MHC		We must merge or move USB PHY relative function later.
-	10/07/2008	MHC		Add IQ calibration for PHY.(Only 1T2R mode now!!!)
-	11/06/2008	MHC		Add TX Power index PG file to config in 0xExx register
-						area to map with EEPROM/EFUSE tx pwr index.
-
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
 ******************************************************************************/
 #include "r8192U.h"
 #include "r8192U_dm.h"
@@ -42,16 +27,12 @@
 
 #include "ieee80211/dot11d.h"
 
-/*---------------------------Define Local Constant---------------------------*/
 /* Channel switch:The size of command tables for switch channel*/
 #define MAX_PRECMD_CNT 16
 #define MAX_RFDEPENDCMD_CNT 16
 #define MAX_POSTCMD_CNT 16
 #define MAX_DOZE_WAITING_TIMES_9x 64
 
-/*------------------------Define local variable------------------------------*/
-// 2004-05-11
-
 static	u32
 phy_CalculateBitShift(u32 BitMask);
 static	RT_STATUS
@@ -86,7 +67,6 @@ static long phy_TxPwrIdxToDbm( struct net_device* dev, WIRELESS_MODE   WirelessM
 static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, long PowerInDbm);
 void phy_SetFwCmdIOCallback(struct net_device* dev);
 
-//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
 //
 // Description:
 //	Base Band read by 4181 to make sure that operation could be done in unlimited cycle.
@@ -95,8 +75,6 @@ void phy_SetFwCmdIOCallback(struct net_device* dev);
 //		-	Only use on RTL8192S USB interface.
 //		-	PASSIVE LEVEL
 //
-// Created by Roger, 2008.09.06.
-//
 //use in phy only
 u32 phy_QueryUsbBBReg(struct net_device* dev, u32	RegAddr)
 {
@@ -118,7 +96,7 @@ u32 phy_QueryUsbBBReg(struct net_device* dev, u32	RegAddr)
 		msleep(1); // 1 ms
 
 		// Wait too long, return FALSE to avoid to be stuck here.
-		if((BBWaitCounter > 100) )//||RT_USB_CANNOT_IO(Adapter))
+		if((BBWaitCounter > 100) )
 		{
 			RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter);
 			return ReturnValue;
@@ -160,9 +138,6 @@ u32 phy_QueryUsbBBReg(struct net_device* dev, u32	RegAddr)
 // Assumption:
 //		-	Only use on RTL8192S USB interface.
 //		-	PASSIVE LEVEL
-//
-// Created by Roger, 2008.09.06.
-//
 //use in phy only
 void
 phy_SetUsbBBReg(struct net_device* dev,u32	RegAddr,u32 Data)
@@ -191,7 +166,6 @@ phy_SetUsbBBReg(struct net_device* dev,u32	RegAddr,u32 Data)
 	}
 
 	priv->bChangeBBInProgress = true;
-	//printk("**************%s: RegAddr:%x Data:%x\n", __FUNCTION__,RegAddr, Data);
 	write_nic_dword(dev, RegAddr, Data);
 
 	priv->bChangeBBInProgress = false;
@@ -215,9 +189,7 @@ u32 phy_QueryUsbRFReg(	struct net_device* dev, RF90_RADIO_PATH_E eRFPath,	u32	Of
 {
 
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//u32	value  = 0, ReturnValue = 0;
 	u32	ReturnValue = 0;
-	//u32 	tmplong,tmplong2;
 	u8	PollingCnt = 50;
 	u8	RFWaitCounter = 0;
 
@@ -229,8 +201,6 @@ u32 phy_QueryUsbRFReg(	struct net_device* dev, RF90_RADIO_PATH_E eRFPath,	u32	Of
 	//
 	while(priv->bChangeRFInProgress)
 	{
-		//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
-		//spin_lock_irqsave(&priv->rf_lock, flags);	//LZM,090318
 		down(&priv->rf_sem);
 
 		RFWaitCounter ++;
@@ -244,14 +214,10 @@ u32 phy_QueryUsbRFReg(	struct net_device* dev, RF90_RADIO_PATH_E eRFPath,	u32	Of
 		}
 		else
 		{
-			//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
 		}
 	}
 
 	priv->bChangeRFInProgress = true;
-	//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
-
-
 	Offset &= 0x3f; //RF_Offset= 0x00~0x3F
 
 	write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000002|
@@ -267,8 +233,6 @@ u32 phy_QueryUsbRFReg(	struct net_device* dev, RF90_RADIO_PATH_E eRFPath,	u32	Of
 	// Data FW read back.
 	ReturnValue = read_nic_dword(dev, RF_BB_CMD_DATA);
 
-	//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
-	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //LZM,090318
 	up(&priv->rf_sem);
 	priv->bChangeRFInProgress = false;
 
@@ -306,27 +270,23 @@ void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32	RegAdd
 	//
 	while(priv->bChangeRFInProgress)
 	{
-		//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
-		//spin_lock_irqsave(&priv->rf_lock, flags);	//LZM,090318
 		down(&priv->rf_sem);
 
 		RFWaitCounter ++;
 		RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter);
 		msleep(1); // 1 ms
 
-		if((RFWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter))
+		if((RFWaitCounter > 100))
 		{
 			RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter);
 			return;
 		}
 		else
 		{
-			//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
 		}
 	}
 
 	priv->bChangeRFInProgress = true;
-	//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
 
 
 	RegAddr &= 0x3f; //RF_Offset= 0x00~0x3F
@@ -347,18 +307,11 @@ void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32	RegAdd
 		RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Set RegAddr(%#x) = %#x Fail!!!\n", RegAddr, Data);
 	}
 
-	//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
-	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //LZM,090318
 	up(&priv->rf_sem);
 	priv->bChangeRFInProgress = false;
 
 }
 
-
-/*---------------------Define local function prototype-----------------------*/
-
-
-/*----------------------------Function Body----------------------------------*/
 //
 // 1. BB register R/W API
 //
@@ -376,8 +329,6 @@ void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32	RegAdd
 * Return:		u32			Data			//The readback register value
 * Note:		This function is equal to "GetRegSetting" in PHY programming guide
 */
-//use phy dm core 8225 8256 6052
-//u32 PHY_QueryBBReg(struct net_device* dev,u32		RegAddr,	u32		BitMask)
 u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
 {
 
@@ -392,10 +343,8 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
 	// infinite cycle.
 	// 2008.09.06.
 	//
-//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
 	if(IS_BB_REG_OFFSET_92S(RegAddr))
 	{
-		//if(RT_USB_CANNOT_IO(Adapter))	return	FALSE;
 
 		if((RegAddr & 0x03) != 0)
 		{
@@ -413,7 +362,7 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
 	BitShift = phy_CalculateBitShift(BitMask);
 	ReturnValue = (OriginalValue & BitMask) >> BitShift;
 
-	//RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", BitMask, RegAddr, OriginalValue));
+
 	RT_TRACE(COMP_RF, "<---PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x), OriginalValue(%#x)\n", RegAddr, BitMask, OriginalValue);
 	return (ReturnValue);
 }
@@ -435,8 +384,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
 * Return:		None
 * Note:		This function is equal to "PutRegSetting" in PHY programming guide
 */
-//use phy dm core 8225 8256
-//void PHY_SetBBReg(struct net_device* dev,u32		RegAddr,	u32		BitMask,	u32		Data	)
 void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data)
 {
 	u32	OriginalValue, BitShift, NewValue;
@@ -450,7 +397,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data
 	// infinite cycle.
 	// 2008.09.06.
 	//
-//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
 	if(IS_BB_REG_OFFSET_92S(RegAddr))
 	{
 		if((RegAddr & 0x03) != 0)
@@ -480,7 +426,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data
 			write_nic_dword(dev, RegAddr, Data);
 	}
 
-	//RT_TRACE(COMP_RF, "<---PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data);
 
 	return;
 }
@@ -505,8 +450,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data
 * Return:		u32			Readback value
 * Note:		This function is equal to "GetRFRegSetting" in PHY programming guide
 */
-//in dm 8256 and phy
-//u32 PHY_QueryRFReg(struct net_device* dev,	RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
 u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
 {
 	u32 Original_Value, Readback_Value, BitShift;//, flags;
@@ -527,9 +470,6 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3
 		return 0;
 	}
 
-	/* 2008/01/17 MH We get and release spin lock when reading RF register. */
-	//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);FIXLZM
-	//spin_lock_irqsave(&priv->rf_lock, flags);	//YJ,test,090113
 	down(&priv->rf_sem);
 	//
 	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
@@ -537,17 +477,11 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3
 	// infinite cycle.
 	// 2008.09.06.
 	//
-//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
-	//if(RT_USB_CANNOT_IO(Adapter))	return FALSE;
 	Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
 
 	BitShift =  phy_CalculateBitShift(BitMask);
 	Readback_Value = (Original_Value & BitMask) >> BitShift;
-	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //YJ,test,090113
 	up(&priv->rf_sem);
-	//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
-
-	//RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Original_Value));
 
 	return (Readback_Value);
 }
@@ -570,8 +504,6 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3
 * Return:		None
 * Note:		This function is equal to "PutRFRegSetting" in PHY programming guide
 */
-//use phy  8225 8256
-//void PHY_SetRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32	RegAddr,	u32 BitMask,u32	Data	)
 void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
 {
 
@@ -592,18 +524,11 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32
 		return;
 	}
 
-	/* 2008/01/17 MH We get and release spin lock when writing RF register. */
-	//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
-	//spin_lock_irqsave(&priv->rf_lock, flags);	//YJ,test,090113
 	down(&priv->rf_sem);
 	//
 	// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
 	// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
 	// infinite cycle.
-	// 2008.09.06.
-	//
-//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
-		//if(RT_USB_CANNOT_IO(Adapter))	return;
 
 		if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
 		{
@@ -614,10 +539,7 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32
 		}
 		else
 			phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data);
-	//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
-	//spin_unlock_irqrestore(&priv->rf_lock, flags);   //YJ,test,090113
 	up(&priv->rf_sem);
-	//RTPRINT(FPHY, PHY_RFW, ("RFW-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Data));
 	RT_TRACE(COMP_RF, "<---PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n",
 			RegAddr, BitMask, Data, eRFPath);
 
@@ -691,29 +613,9 @@ PHY_BBConfig8192S(struct net_device* dev)
 	struct r8192_priv 	*priv = ieee80211_priv(dev);
 	phy_InitBBRFRegisterDefinition(dev);
 
-	//
-	// Config BB and AGC
-	//
-	//switch( Adapter->MgntInfo.bRegHwParaFile )
-	//{
-	//	case 0:
-	//		phy_BB8190_Config_HardCode(dev);
-	//		break;
 
-	//	case 1:
 			rtStatus = phy_BB8192S_Config_ParaFile(dev);
-	//		break;
-
-	//	case 2:
-			// Partial Modify.
-	//		phy_BB8190_Config_HardCode(dev);
-	//		phy_BB8192S_Config_ParaFile(dev);
-	//		break;
-
-	//	default:
-	//		phy_BB8190_Config_HardCode(dev);
-	//		break;
-	//}
+
 	PathMap = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_TxInfo, 0xf) |
 				rtl8192_QueryBBReg(dev, rOFDM0_TRxPathEnable, 0xf));
 	priv->rf_pathmap = PathMap;
@@ -774,15 +676,10 @@ PHY_RFConfig8192S(struct net_device* dev)
 }
 
 
-// Joseph test: new initialize order!!
-// Test only!! This part need to be re-organized.
-// Now it is just for 8256.
-//use in phy only
 #ifdef TO_DO_LIST
 static RT_STATUS
 phy_BB8190_Config_HardCode(struct net_device* dev)
 {
-	//RT_ASSERT(FALSE, ("This function is not implement yet!! \n"));
 	return RT_STATUS_SUCCESS;
 }
 #endif
@@ -811,7 +708,6 @@ phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType)
 	u32* 			Rtl819XPHY_REGArraytoXTXR_Table;
 	u16				PHY_REGArraytoXTXRLen;
 
-//#if (HAL_CODE_BASE != RTL8192_S)
 
 	if(priv->rf_type == RF_1T1R)
 	{
@@ -823,11 +719,6 @@ phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType)
 		Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T2R_Array;
 		PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T2RArrayLength;
 	}
-	//else if(priv->rf_type == RF_2T2R || priv->rf_type == RF_2T2R_GREEN)
-	//{
-	//	Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to2T2R_Array;
-	//	PHY_REGArraytoXTXRLen = PHY_ChangeTo_2T2RArrayLength;
-	//}
 	else
 	{
 		return RT_STATUS_FAILURE;
@@ -850,15 +741,11 @@ phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType)
 			else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xf9)
 				udelay(1);
 			rtl8192_setBBreg(dev, Rtl819XPHY_REGArraytoXTXR_Table[i], Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
-			//RT_TRACE(COMP_SEND,
-			//"The Rtl819XPHY_REGArraytoXTXR_Table[0] is %lx Rtl819XPHY_REGArraytoXTXR_Table[1] is %lx Rtl819XPHY_REGArraytoXTXR_Table[2] is %lx \n",
-			//Rtl819XPHY_REGArraytoXTXR_Table[i],Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
 		}
 	}
 	else {
 		RT_TRACE(COMP_SEND, "phy_SetBBtoDiffRFWithHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
 	}
-//#endif	// #if (HAL_CODE_BASE != RTL8192_S)
 	return RT_STATUS_SUCCESS;
 }
 
@@ -869,14 +756,6 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev)
 {
 	struct r8192_priv 	*priv = ieee80211_priv(dev);
 	RT_STATUS			rtStatus = RT_STATUS_SUCCESS;
-	//u8				u2RegValue;
-	//u16				u4RegValue;
-	//char				szBBRegFile[] = RTL819X_PHY_REG;
-	//char				szBBRegFile1T2R[] = RTL819X_PHY_REG_1T2R;
-	//char				szBBRegPgFile[] = RTL819X_PHY_REG_PG;
-	//char				szAGCTableFile[] = RTL819X_AGC_TAB;
-	//char				szBBRegto1T1RFile[] = RTL819X_PHY_REG_to1T1R;
-	//char				szBBRegto1T2RFile[] = RTL819X_PHY_REG_to1T2R;
 
 	RT_TRACE(COMP_INIT, "==>phy_BB8192S_Config_ParaFile\n");
 
@@ -956,42 +835,16 @@ phy_ConfigMACWithHeaderFile(struct net_device* dev)
 	u32					i = 0;
 	u32					ArrayLength = 0;
 	u32*					ptrArray;
-	//struct r8192_priv 	*priv = ieee80211_priv(dev);
 
-//#if (HAL_CODE_BASE != RTL8192_S)
-	/*if(Adapter->bInHctTest)
-	{
-		RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_ArrayDTM\n"));
-		ArrayLength = MACPHY_ArrayLengthDTM;
-		ptrArray = Rtl819XMACPHY_ArrayDTM;
-	}
-	else if(pHalData->bTXPowerDataReadFromEEPORM)
-	{
-//		RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_Array_PG\n"));
-//		ArrayLength = MACPHY_Array_PGLength;
-//		ptrArray = Rtl819XMACPHY_Array_PG;
-
-	}else*/
 	{ //2008.11.06 Modified by tynli.
 		RT_TRACE(COMP_INIT, "Read Rtl819XMACPHY_Array\n");
 		ArrayLength = MAC_2T_ArrayLength;
 		ptrArray = Rtl819XMAC_Array;
 	}
 
-	/*for(i = 0 ;i < ArrayLength;i=i+3){
-		RT_TRACE(COMP_SEND, DBG_LOUD, ("The Rtl819XMACPHY_Array[0] is %lx Rtl819XMACPHY_Array[1] is %lx Rtl819XMACPHY_Array[2] is %lx\n",ptrArray[i], ptrArray[i+1], ptrArray[i+2]));
-		if(ptrArray[i] == 0x318)
-		{
-			ptrArray[i+2] = 0x00000800;
-			//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
-			//	ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
-		}
-		PHY_SetBBReg(Adapter, ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
-	}*/
 	for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column
 		write_nic_byte(dev, ptrArray[i], (u8)ptrArray[i+1]);
 	}
-//#endif
 	return RT_STATUS_SUCCESS;
 }
 
@@ -1015,41 +868,14 @@ static	RT_STATUS
 phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType)
 {
 	int 		i;
-	//u8 		ArrayLength;
 	u32*	Rtl819XPHY_REGArray_Table;
 	u32*	Rtl819XAGCTAB_Array_Table;
 	u16		PHY_REGArrayLen, AGCTAB_ArrayLen;
-	//struct r8192_priv *priv = ieee80211_priv(dev);
-//#if (HAL_CODE_BASE != RTL8192_S)
-	/*if(Adapter->bInHctTest)
-	{
-
-		AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
-		Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
-
-		if(pHalData->RF_Type == RF_2T4R)
-		{
-			PHY_REGArrayLen = PHY_REGArrayLengthDTM;
-			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
-		}
-		else if (pHalData->RF_Type == RF_1T2R)
-		{
-			PHY_REGArrayLen = PHY_REG_1T2RArrayLengthDTM;
-			Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArrayDTM;
-		}
 
-	}
-	else
-	*/
-	//{
-	//
-	// 2008.11.06 Modified by tynli.
-	//
 	AGCTAB_ArrayLen = AGCTAB_ArrayLength;
 	Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_Array;
 	PHY_REGArrayLen = PHY_REG_2T2RArrayLength; // Default RF_type: 2T2R
 	Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_Array;
-	//}
 
 	if(ConfigType == BaseBand_Config_PHY_REG)
 	{
@@ -1068,7 +894,6 @@ phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType)
 			else if (Rtl819XPHY_REGArray_Table[i] == 0xf9)
 				udelay(1);
 			rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
-			//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
 
 		}
 	}
@@ -1078,7 +903,6 @@ phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType)
 			rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
 		}
 	}
-//#endif	// #if (HAL_CODE_BASE != RTL8192_S)
 	return RT_STATUS_SUCCESS;
 }
 
@@ -1103,12 +927,8 @@ static RT_STATUS
 phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType)
 {
 	int i;
-	//u8 ArrayLength;
 	u32*	Rtl819XPHY_REGArray_Table_PG;
 	u16	PHY_REGArrayPGLen;
-	//struct r8192_priv *priv = ieee80211_priv(dev);
-//#if (HAL_CODE_BASE != RTL8192_S)
-	// Default: pHalData->RF_Type = RF_2T2R.
 
 	PHY_REGArrayPGLen = PHY_REG_Array_PGLength;
 	Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG;
@@ -1130,15 +950,13 @@ phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType)
 			else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9)
 				udelay(1);
 			rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]);
-			//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n",
-			//		Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1]);
 		}
 	}else{
 		RT_TRACE(COMP_SEND, "phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
 	}
 	return RT_STATUS_SUCCESS;
 
-}	/* phy_ConfigBBWithPgHeaderFile */
+}
 
 /*-----------------------------------------------------------------------------
  * Function:    PHY_ConfigRFWithHeaderFile()
@@ -1155,19 +973,14 @@ phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType)
  *
  * Note:		Delay may be required for RF configuration
  *---------------------------------------------------------------------------*/
-//in 8256 phy_RF8256_Config_ParaFile only
-//RT_STATUS PHY_ConfigRFWithHeaderFile(struct net_device* dev,RF90_RADIO_PATH_E eRFPath)
 u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E	eRFPath)
 {
 
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	int			i;
-	//u32*	pRFArray;
 	RT_STATUS	rtStatus = RT_STATUS_SUCCESS;
 	u32			*Rtl819XRadioA_Array_Table;
 	u32			*Rtl819XRadioB_Array_Table;
-	//u32*	Rtl819XRadioC_Array_Table;
-	//u32*	Rtl819XRadioD_Array_Table;
 	u16			RadioA_ArrayLen,RadioB_ArrayLen;
 
 	{	//2008.11.06 Modified by tynli
@@ -1190,18 +1003,12 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 
 	rtStatus = RT_STATUS_SUCCESS;
 
-	// When initialization, we want the delay function(mdelay(), delay_us()
-	// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
-	// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
-	// to run at Dispatch level to achive it.
-	//cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK);
 
 	switch(eRFPath){
 		case RF90_PATH_A:
 			for(i = 0;i<RadioA_ArrayLen; i=i+2){
 				if(Rtl819XRadioA_Array_Table[i] == 0xfe)
 					{ // Deay specific ms. Only RF configuration require delay.
-//#if (DEV_BUS_TYPE == USB_INTERFACE)
 						mdelay(1000);
 				}
 					else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
@@ -1210,7 +1017,6 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 						mdelay(1);
 					else if (Rtl819XRadioA_Array_Table[i] == 0xfb)
 						udelay(50);
-						//PlatformStallExecution(50);
 					else if (Rtl819XRadioA_Array_Table[i] == 0xfa)
 						udelay(5);
 					else if (Rtl819XRadioA_Array_Table[i] == 0xf9)
@@ -1225,7 +1031,6 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E
 			for(i = 0;i<RadioB_ArrayLen; i=i+2){
 				if(Rtl819XRadioB_Array_Table[i] == 0xfe)
 					{ // Deay specific ms. Only RF configuration require delay.
-//#if (DEV_BUS_TYPE == USB_INTERFACE)
 						mdelay(1000);
 				}
 					else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
@@ -1281,7 +1086,6 @@ PHY_CheckBBAndRFOK(
 	RF90_RADIO_PATH_E	eRFPath
 	)
 {
-	//struct r8192_priv *priv = ieee80211_priv(dev);
 	RT_STATUS			rtStatus = RT_STATUS_SUCCESS;
 	u32				i, CheckTimes = 4,ulRegRead = 0;
 	u32				WriteAddr[4];
@@ -1302,7 +1106,6 @@ PHY_CheckBBAndRFOK(
 		switch(CheckBlock)
 		{
 		case HW90_BLOCK_MAC:
-			//RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!"));
 			RT_TRACE(COMP_INIT, "PHY_CheckBBRFOK(): Never Write 0x100 here!\n");
 			break;
 
@@ -1313,18 +1116,12 @@ PHY_CheckBBAndRFOK(
 			break;
 
 		case HW90_BLOCK_RF:
-			// When initialization, we want the delay function(mdelay(), delay_us()
-			// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
-			// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
-			// to run at Dispatch level to achive it.
-			//cosa PlatformAcquireSpinLock(dev, RT_INITIAL_SPINLOCK);
 			WriteData[i] &= 0xfff;
 			rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]);
 			// TODO: we should not delay for such a long time. Ask SD3
 			mdelay(10);
 			ulRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
 			mdelay(10);
-			//cosa PlatformReleaseSpinLock(dev, RT_INITIAL_SPINLOCK);
 			break;
 
 		default:
@@ -1338,7 +1135,6 @@ PHY_CheckBBAndRFOK(
 		//
 		if(ulRegRead != WriteData[i])
 		{
-			//RT_TRACE(COMP_FPGA,  ("ulRegRead: %x, WriteData: %x \n", ulRegRead, WriteData[i]));
 			RT_TRACE(COMP_ERR, "read back error(read:%x, write:%x)\n", ulRegRead, WriteData[i]);
 			rtStatus = RT_STATUS_FAILURE;
 			break;
@@ -1348,7 +1144,6 @@ PHY_CheckBBAndRFOK(
 	return rtStatus;
 }
 
-//no use temp in windows driver
 #ifdef TO_DO_LIST
 void
 PHY_SetRFPowerState8192SUsb(
@@ -1359,7 +1154,6 @@ PHY_SetRFPowerState8192SUsb(
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	bool			WaitShutDown = FALSE;
 	u32			DWordContent;
-	//RF90_RADIO_PATH_E	eRFPath;
 	u8				eRFPath;
 	BB_REGISTER_DEFINITION_T	*pPhyReg;
 
@@ -1368,7 +1162,6 @@ PHY_SetRFPowerState8192SUsb(
 
 	priv->SetRFPowerStateInProgress = TRUE;
 
-	// TODO: Emily, 2006.11.21, we should rewrite this function
 
 	if(RFPowerState==RF_SHUT_DOWN)
 	{
@@ -1420,22 +1213,20 @@ PHY_SetRFPowerState8192SUsb(
 
 	case RF_8258:
 		break;
-	}// switch( priv->rf_chip )
+	}
 
 	priv->SetRFPowerStateInProgress = FALSE;
 }
 #endif
 
 #ifdef RTL8192U
-//no use temp in windows driver
 void
 PHY_UpdateInitialGain(
 	struct net_device* dev
 	)
 {
 	struct r8192_priv 	*priv = ieee80211_priv(dev);
-	//unsigned char			*IGTable;
-	//u8			DIG_CurrentInitialGain = 4;
+
 
 	switch(priv->rf_chip)
 	{
@@ -1456,7 +1247,6 @@ PHY_UpdateInitialGain(
 }
 #endif
 
-//YJ,modified,090107
 void PHY_GetHWRegOriginalValue(struct net_device* dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1625,8 +1415,6 @@ static void phy_InitBBRFRegisterDefinition(	struct net_device* dev)
 	// Tranceiver LSSI Readback PI mode
 	priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
 	priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback;
-	//pHalData->PHYRegDef[RF90_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack;
-	//pHalData->PHYRegDef[RF90_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack;
 
 }
 
@@ -1637,9 +1425,7 @@ static void phy_InitBBRFRegisterDefinition(	struct net_device* dev)
 //	Assumption: This function must be executed in re-schdulable context,
 //		ie. PASSIVE_LEVEL.
 //
-//	050823, by rcnjko.
-//not understand it seem's use in init
-//SetHwReg8192SUsb--->HalFunc.SetHwRegHandler
+
 bool PHY_SetRFPowerState(struct net_device* dev, RT_RF_POWER_STATE eRFPowerState)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1665,8 +1451,6 @@ static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE e
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	bool			bResult = TRUE;
-	//u8		eRFPath;
-	//u8		i, QueueID;
 	u8 		u1bTmp;
 
 	if(priv->SetRFPowerStateInProgress == TRUE)
@@ -1697,9 +1481,6 @@ static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE e
 						break;
 				//
 				//RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon.
-				// Added by Bruce, 2008-11-22.
-				//
-				//==================================================================
 				// (0) Disable FW BB reset checking
 				write_nic_dword(dev, WFM5, FW_BB_RESET_DISABLE);
 
@@ -1728,7 +1509,6 @@ static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE e
 
 			default:
 				bResult = FALSE;
-				//RT_ASSERT(FALSE, ("phy_SetRFPowerState8192SU(): unknown state to set: 0x%X!!!\n", eRFPowerState));
 				break;
 		}
 		break;
@@ -1860,7 +1640,6 @@ PHY_GetTxPowerLevel8192S(
  void PHY_SetTxPowerLevel8192S(struct net_device* dev, u8	channel)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//HAL_DATA_TYPE		*pHalData = GET_HAL_DATA(dev);
 	u8	powerlevel = (u8)EEPROM_Default_TxPower, powerlevelOFDM24G = 0x10;
 	s8 	ant_pwr_diff = 0;
 	u32	u4RegValue;
@@ -1909,14 +1688,6 @@ PHY_GetTxPowerLevel8192S(
 			// RF B HT OFDM pwr-RFA HT OFDM pwr
 		ant_pwr_diff = 	priv->RfTxPwrLevelOfdm2T[1][index] -
 						priv->RfTxPwrLevelOfdm2T[0][index];
-			// RF B (HT OFDM pwr+legacy-ht-diff) -(RFA HT OFDM pwr+legacy-ht-diff)
-		// We can not handle Path B&A HT/Legacy pwr diff for 92S now.
-
-		//RTPRINT(FPHY, PHY_TXPWR, ("CH-%d HT40 A/B Pwr index = %x/%x(%d/%d)\n",
-		//channel, priv->RfTxPwrLevelOfdm2T[0][index],
-		//priv->RfTxPwrLevelOfdm2T[1][index],
-		//priv->RfTxPwrLevelOfdm2T[0][index],
-		//priv->RfTxPwrLevelOfdm2T[1][index]));
 
 		ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm2T[0][index];
 		ht20pwr[1] = ht40pwr[1] = priv->RfTxPwrLevelOfdm2T[1][index];
@@ -1949,10 +1720,6 @@ PHY_GetTxPowerLevel8192S(
 			// RF B HT OFDM pwr-RFA HT OFDM pwr
 			if (priv->rf_type == RF_2T2R)
 				ant_pwr_diff = ht20pwr[1] - ht20pwr[0];
-
-			//RTPRINT(FPHY, PHY_TXPWR,
-			//("HT20 to HT40 pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
-			//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
 		}
 
 		// Band Edge scheme is enabled for FCC mode
@@ -1997,18 +1764,12 @@ PHY_GetTxPowerLevel8192S(
 			{
 				if (channel <= 1 || channel >= 11)
 				{
-					//RTPRINT(FPHY, PHY_TXPWR,
-					//("HT20 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
-					//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
 				}
 			}
 			else
 			{
 				if (channel <= 3 || channel >= 9)
 				{
-					//RTPRINT(FPHY, PHY_TXPWR,
-					//("HT40 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
-					//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht40pwr[1], ht40pwr[0]));
 				}
 			}
 		}
@@ -2021,10 +1782,6 @@ PHY_GetTxPowerLevel8192S(
 	if(ant_pwr_diff < -8)
 		ant_pwr_diff = -8;
 
-		//RTPRINT(FPHY, PHY_TXPWR,
-		//("CCK/HT Power index = %x/%x(%d/%d), ant_pwr_diff=%d\n",
-		//powerlevel, powerlevelOFDM24G, powerlevel, powerlevelOFDM24G, ant_pwr_diff));
-
 		ant_pwr_diff &= 0xf;
 
 		// Antenna TX power difference
@@ -2050,7 +1807,6 @@ PHY_GetTxPowerLevel8192S(
 	// TODO:
 	// 1. 802.11h power contraint
 	//
-	// 071011, by rcnjko.
 	//
 #ifdef TODO //WB, 11h has not implemented now.
 	if(	priv->ieee80211->iw_mode != IW_MODE_INFRA && priv->bWithCcxCellPwr &&
@@ -2095,8 +1851,6 @@ PHY_GetTxPowerLevel8192S(
 	switch(priv->rf_chip)
 	{
 		case RF_8225:
-			//PHY_SetRF8225CckTxPower(dev, powerlevel);
-			//PHY_SetRF8225OfdmTxPower(dev, powerlevelOFDM24G);
 		break;
 
 		case RF_8256:
@@ -2121,8 +1875,6 @@ PHY_GetTxPowerLevel8192S(
 //
 //	TODO:
 //		A mode.
-//	By Bruce, 2008-02-04.
-//    no use temp
 bool PHY_UpdateTxPowerDbm8192S(struct net_device* dev, long powerInDbm)
 {
 	struct r8192_priv 	*priv = ieee80211_priv(dev);
@@ -2164,8 +1916,6 @@ bool PHY_UpdateTxPowerDbm8192S(struct net_device* dev, long powerInDbm)
 	Description:
 		When beacon interval is changed, the values of the
 		hw registers should be modified.
-	By tynli, 2008.10.24.
-
 */
 
 extern void PHY_SetBeaconHwReg(	struct net_device* dev, u16 BeaconInterval)
@@ -2173,8 +1923,6 @@ extern void PHY_SetBeaconHwReg(	struct net_device* dev, u16 BeaconInterval)
 	u32 NewBeaconNum;
 
 	NewBeaconNum = BeaconInterval *32 - 64;
-	//PlatformEFIOWrite4Byte(Adapter, WFM3+4, NewBeaconNum);
-	//PlatformEFIOWrite4Byte(Adapter, WFM3, 0xB026007C);
 	write_nic_dword(dev, WFM3+4, NewBeaconNum);
 	write_nic_dword(dev, WFM3, 0xB026007C);
 }
@@ -2184,7 +1932,6 @@ extern void PHY_SetBeaconHwReg(	struct net_device* dev, u16 BeaconInterval)
 //		Map dBm into Tx power index according to
 //		current HW model, for example, RF and PA, and
 //		current wireless mode.
-//	By Bruce, 2008-01-29.
 //    use in phy only
 static u8 phy_DbmToTxPwrIdx(
 	struct net_device* dev,
@@ -2192,7 +1939,6 @@ static u8 phy_DbmToTxPwrIdx(
 	long			PowerInDbm
 	)
 {
-	//struct r8192_priv *priv = ieee80211_priv(dev);
 	u8				TxPwrIdx = 0;
 	long				Offset = 0;
 
@@ -2202,7 +1948,6 @@ static u8 phy_DbmToTxPwrIdx(
 	// 3dbm, and OFDM HT equals to 0dbm repectively.
 	// Note:
 	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
-	// By Bruce, 2008-01-29.
 	//
 	switch(WirelessMode)
 	{
@@ -2238,7 +1983,6 @@ static u8 phy_DbmToTxPwrIdx(
 //		Map Tx power index into dBm according to
 //		current HW model, for example, RF and PA, and
 //		current wireless mode.
-//	By Bruce, 2008-01-29.
 //    use in phy only
 static long phy_TxPwrIdxToDbm(
 	struct net_device* dev,
@@ -2255,7 +1999,6 @@ static long phy_TxPwrIdxToDbm(
 	// 3dbm, and OFDM HT equals to 0dbm repectively.
 	// Note:
 	//	The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
-	// By Bruce, 2008-01-29.
 	//
 	switch(WirelessMode)
 	{
@@ -2327,9 +2070,6 @@ PHY_ScanOperationBackup8192S(
 void PHY_InitialGain8192S(struct net_device* dev,u8 Operation	)
 {
 
-	//struct r8192_priv *priv = ieee80211_priv(dev);
-	//u32					BitMask;
-	//u8					initial_gain;
 }
 
 /*-----------------------------------------------------------------------------
@@ -2353,11 +2093,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8	 			regBwOpMode;
 
-	//return;
-
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//u32				NowL, NowH;
-	//u8Byte				BeginTime, EndTime;
 	u8				regRRSR_RSC;
 
 	RT_TRACE(COMP_SWBW, "==>SetBWModeCallback8190Pci()  Switch to %s bandwidth\n", \
@@ -2372,10 +2107,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 	if(!priv->up)
 		return;
 
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//NowL = read_nic_dword(dev, TSFR);
-	//NowH = read_nic_dword(dev, TSFR+4);
-	//BeginTime = ((u8Byte)NowH << 32) + NowL;
 
 	//3//
 	//3//<1>Set MAC register
@@ -2386,8 +2117,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 	switch(priv->CurrentChannelBW)
 	{
 		case HT_CHANNEL_WIDTH_20:
-			//if(priv->card_8192_version >= VERSION_8192S_BCUT)
-			//	write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
 
 			regBwOpMode |= BW_OPMODE_20MHZ;
 		       	// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
@@ -2395,8 +2124,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 			break;
 
 		case HT_CHANNEL_WIDTH_20_40:
-			//if(priv->card_8192_version >= VERSION_8192S_BCUT)
-			//	write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
 
 			regBwOpMode &= ~BW_OPMODE_20MHZ;
         		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
@@ -2421,12 +2148,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
 			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
 
-			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
-			// It is set in Tx descriptor for 8192x series
-			//write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
-			//write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
-			//write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
-
 			if (priv->card_8192_version >= VERSION_8192S_BCUT)
 				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
 
@@ -2438,16 +2159,11 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 			rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
 			rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
 
-			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
-			//write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
-			//write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
-			//write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
 
 			// Set Control channel to upper or lower. These settings are required only for 40MHz
 			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
 			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
 
-			//rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
 			if (priv->card_8192_version >= VERSION_8192S_BCUT)
 				write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
 
@@ -2461,11 +2177,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
 	}
 	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
 
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//NowL = read_nic_dword(dev, TSFR);
-	//NowH = read_nic_dword(dev, TSFR+4);
-	//EndTime = ((u8Byte)NowH << 32) + NowL;
-	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
 
 	//3<3>Set RF related register
 	switch( priv->rf_chip )
@@ -2516,36 +2227,11 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev)
  *
  * Note:		We do not take j mode into consideration now
  *---------------------------------------------------------------------------*/
-//extern void PHY_SetBWMode8192S(	struct net_device* dev,
-//	HT_CHANNEL_WIDTH	Bandwidth,	// 20M or 40M
-//	HT_EXTCHNL_OFFSET	Offset		// Upper, Lower, or Don't care
 void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EXTCHNL_OFFSET Offset)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	HT_CHANNEL_WIDTH tmpBW = priv->CurrentChannelBW;
 
-
-	// Modified it for 20/40 mhz switch by guangan 070531
-
-	//return;
-
-	//if(priv->SwChnlInProgress)
-//	if(pMgntInfo->bScanInProgress)
-//	{
-//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s Exit because bScanInProgress!\n",
-//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
-//		return;
-//	}
-
-//	if(priv->SetBWModeInProgress)
-//	{
-//		// Modified it for 20/40 mhz switch by guangan 070531
-//		RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s cancel last timer because SetBWModeInProgress!\n",
-//					Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
-//		PlatformCancelTimer(dev, &priv->SetBWModeTimer);
-//		//return;
-//	}
-
 	if(priv->SetBWModeInProgress)
 		return;
 
@@ -2560,7 +2246,7 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH	Bandwidth, HT_EX
 	else
 		priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
 
-	if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) )
+	if((priv->up) )
 	{
 	SetBWModeCallback8192SUsbWorkItem(dev);
 	}
@@ -2578,7 +2264,6 @@ void PHY_SwChnlCallback8192S(struct net_device *dev)
 
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32		delay;
-	//bool			ret;
 
 	RT_TRACE(COMP_CH, "==>SwChnlCallback8190Pci(), switch to channel %d\n", priv->chan);
 
@@ -2595,16 +2280,11 @@ void PHY_SwChnlCallback8192S(struct net_device *dev)
 		if(!priv->SwChnlInProgress)
 			break;
 
-		//if(!phy_SwChnlStepByStep(dev, priv->CurrentChannel, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
 		if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
 		{
 			if(delay>0)
 			{
 				mdelay(delay);
-				//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
-				//mod_timer(&priv->SwChnlTimer,  jiffies + MSECS(delay));
-				//==>PHY_SwChnlCallback8192S(dev); for 92se
-				//==>SwChnlCallback8192SUsb(dev) for 92su
 			}
 			else
 			continue;
@@ -2618,12 +2298,9 @@ void PHY_SwChnlCallback8192S(struct net_device *dev)
 }
 
 // Call after initialization
-//extern void PHY_SwChnl8192S(struct net_device* dev,	u8 channel)
 u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//u8 			tmpchannel =channel;
-	//bool			bResult = false;
 
         if(!priv->up)
 		return false;
@@ -2634,7 +2311,6 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 	if(priv->SetBWModeInProgress)
 		return false;
 
-	//--------------------------------------------
 	switch(priv->ieee80211->mode)
 	{
 	case WIRELESS_MODE_A:
@@ -2661,10 +2337,9 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 		break;
 
 	default:
-			;//RT_TRACE(COMP_ERR, "Invalid WirelessMode(%#x)!!\n", priv->ieee80211->mode);
+			;
 		break;
 	}
-	//--------------------------------------------
 
 	priv->SwChnlInProgress = TRUE;
 	if( channel == 0)
@@ -2675,7 +2350,7 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 	priv->SwChnlStage=0;
 	priv->SwChnlStep=0;
 
-	if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower))
+	if((priv->up))
 	{
 	SwChnlCallback8192SUsbWorkItem(dev);
 #ifdef TO_DO_LIST
@@ -2695,7 +2370,6 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 	{
 		RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE driver sleep or unload\n");
 		priv->SwChnlInProgress = false;
-		//priv->CurrentChannel = tmpchannel;
 	}
         return true;
 }
@@ -2709,8 +2383,7 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
 // The following procedure is operted according to SwChanlCallback8190Pci().
 // However, this procedure is performed synchronously  which should be running under
 // passive level.
-//
-//not understand it
+
 void PHY_SwChnlPhy8192S(	// Only called during initialize
 	struct net_device* dev,
 	u8		channel
@@ -2767,14 +2440,10 @@ phy_SetSwChnlCmdArray(
 
 	if(CmdTable == NULL)
 	{
-		//RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"));
 		return FALSE;
 	}
 	if(CmdTableIdx >= CmdTableSz)
 	{
-		//RT_ASSERT(FALSE,
-			//	("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
-				//CmdTableIdx, CmdTableSz));
 		return FALSE;
 	}
 
@@ -2798,7 +2467,6 @@ phy_SwChnlStepByStep(
 	)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	//PCHANNEL_ACCESS_SETTING	pChnlAccessSetting;
 	SwChnlCmd				PreCommonCmd[MAX_PRECMD_CNT];
 	u32					PreCommonCmdCnt;
 	SwChnlCmd				PostCommonCmd[MAX_POSTCMD_CNT];
@@ -2808,22 +2476,13 @@ phy_SwChnlStepByStep(
 	SwChnlCmd				*CurrentCmd = NULL;
 	u8					eRFPath;
 
-	//RT_ASSERT((dev != NULL), ("Adapter should not be NULL\n"));
-	//RT_ASSERT(IsLegalChannel(dev, channel), ("illegal channel: %d\n", channel));
 	RT_TRACE(COMP_CH, "===========>%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step);
-	//RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n"));
 	if (!IsLegalChannel(priv->ieee80211, channel))
 	{
 		RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
 		return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
 	}
 
-	//pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting;
-	//RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n"));
-
-	//for(eRFPath = RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
-	//for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
-	//{
 		// <1> Fill up pre common command.
 	PreCommonCmdCnt = 0;
 	phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
@@ -2844,8 +2503,7 @@ phy_SwChnlStepByStep(
 		case RF_8225:
 		if (channel < 1 || channel > 14)
 			RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
-		//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
-		// 2008/09/04 MH Change channel.
+
 		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
 			CmdID_RF_WriteReg, rRfChannel, channel, 10);
 		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
@@ -2855,8 +2513,6 @@ phy_SwChnlStepByStep(
 	case RF_8256:
 		if (channel < 1 || channel > 14)
 			RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
-		// TEST!! This is not the table for 8256!!
-		//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
 		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
 			CmdID_RF_WriteReg, rRfChannel, channel, 10);
 		phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
@@ -2876,7 +2532,6 @@ phy_SwChnlStepByStep(
 		break;
 
 	default:
-		//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
 		return FALSE;
 		break;
 	}
@@ -2913,7 +2568,6 @@ phy_SwChnlStepByStep(
 		switch(CurrentCmd->CmdID)
 		{
 		case CmdID_SetTxPowerLevel:
-			//if(priv->card_8192_version > VERSION_8190_BD)
 				PHY_SetTxPowerLevel8192S(dev,channel);
 			break;
 		case CmdID_WritePortUlong:
@@ -2930,7 +2584,6 @@ phy_SwChnlStepByStep(
 			{
 			// For new T65 RF 0222d register 0x18 bit 0-9 = channel number.
 				rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2));
-				//printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f));
 			}
 			break;
                 default:
@@ -2939,7 +2592,6 @@ phy_SwChnlStepByStep(
 
 		break;
 	}while(TRUE);
-	//cosa }/*for(Number of RF paths)*/
 
 	(*delay)=CurrentCmd->msDelay;
 	(*step)++;
@@ -2985,14 +2637,8 @@ phy_FinishSwChnlNow(	// We should not call this function directly
  *	11/15/2007	MHC		Create Version 0.
  *
  *---------------------------------------------------------------------------*/
- //called by rtl8192_phy_QueryRFReg, rtl8192_phy_SetRFReg, PHY_SetRFPowerState8192SUsb
-//extern	bool
-//PHY_CheckIsLegalRfPath8192S(
-//	struct net_device* dev,
-//	u32	eRFPath)
 u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
 {
-//	struct r8192_priv *priv = ieee80211_priv(dev);
 	bool				rtValue = TRUE;
 
 	// NOt check RF Path now.!
@@ -3023,7 +2669,6 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
 void
 PHY_IQCalibrate(	struct net_device* dev)
 {
-	//struct r8192_priv 	*priv = ieee80211_priv(dev);
 	u32				i, reg;
 	u32				old_value;
 	long				X, Y, TX0[4];
@@ -3039,7 +2684,6 @@ PHY_IQCalibrate(	struct net_device* dev)
 	{
 		// IQK
 		rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430);
-		//PlatformStallExecution(5);
 		udelay(5);
 		rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4);
 		udelay(5);
@@ -3169,8 +2813,6 @@ PHY_IQCalibrate(	struct net_device* dev)
  *---------------------------------------------------------------------------*/
 extern void PHY_IQCalibrateBcut(struct net_device* dev)
 {
-	//struct r8192_priv 	*priv = ieee80211_priv(dev);
-	//PMGNT_INFO		pMgntInfo = &pAdapter->MgntInfo;
 	u32				i, reg;
 	u32				old_value;
 	long				X, Y, TX0[4];
@@ -3184,21 +2826,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 	//
 	// 1. Save e70~ee0 register setting, and load calibration setting
 	//
-	/*
-	0xee0[31:0]=0x3fed92fb;
-	0xedc[31:0] =0x3fed92fb;
-	0xe70[31:0] =0x3fed92fb;
-	0xe74[31:0] =0x3fed92fb;
-	0xe78[31:0] =0x3fed92fb;
-	0xe7c[31:0]= 0x3fed92fb;
-	0xe80[31:0]= 0x3fed92fb;
-	0xe84[31:0]= 0x3fed92fb;
-	0xe88[31:0]= 0x3fed92fb;
-	0xe8c[31:0]= 0x3fed92fb;
-	0xed0[31:0]= 0x3fed92fb;
-	0xed4[31:0]= 0x3fed92fb;
-	0xed8[31:0]= 0x3fed92fb;
-	*/
 	calibrate_set [0] = 0xee0;
 	calibrate_set [1] = 0xedc;
 	calibrate_set [2] = 0xe70;
@@ -3212,7 +2839,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 	calibrate_set [10] = 0xed0;
 	calibrate_set [11] = 0xed4;
 	calibrate_set [12] = 0xed8;
-	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Save e70~ee0 register setting\n"));
 	for (i = 0; i < 13; i++)
 	{
 		load_value[i] = rtl8192_QueryBBReg(dev, calibrate_set[i], bMaskDWord);
@@ -3232,7 +2858,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 		//BB switch to PI mode. If default is PI mode, ignoring 2 commands below.
 		if (!RfPiEnable)	//if original is SI mode, then switch to PI mode.
 		{
-			//DbgPrint("IQK Switch to PI mode\n");
 			rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000100);
 			rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000100);
 		}
@@ -3286,7 +2911,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 
 		if (!RfPiEnable)	//if original is SI mode, then switch to PI mode.
 		{
-			//DbgPrint("IQK Switch back to SI mode\n");
 			rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000000);
 			rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000000);
 		}
@@ -3369,7 +2993,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 	//
 	// 4. Reload e70~ee0 register setting.
 	//
-	//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reload e70~ee0 register setting.\n"));
 	for (i = 0; i < 13; i++)
 		rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, load_value[i]);
 
@@ -3380,14 +3003,12 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev)
 
 
 
-}	// PHY_IQCalibrateBcut
+}
 
 
 //
 // Move from phycfg.c to gen.c to be code independent later
 //
-//-------------------------Move to other DIR later----------------------------*/
-//#if (DEV_BUS_TYPE == USB_INTERFACE)
 
 //    use in phy only (in win it's timer)
 void SwChnlCallback8192SUsb(struct net_device *dev)
@@ -3395,7 +3016,6 @@ void SwChnlCallback8192SUsb(struct net_device *dev)
 
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u32			delay;
-//	bool			ret;
 
 	RT_TRACE(COMP_SCAN, "==>SwChnlCallback8190Pci(), switch to channel %d\n",
 		 priv->chan);
@@ -3418,7 +3038,6 @@ void SwChnlCallback8192SUsb(struct net_device *dev)
 		{
 			if(delay>0)
 			{
-				//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
 
 			}
 			else
@@ -3473,16 +3092,12 @@ void SwChnlCallback8192SUsbWorkItem(struct net_device *dev )
  *			(2) Will two workitem of "switch channel" and "switch channel bandwidth" run
  *			     concurrently?
  *---------------------------------------------------------------------------*/
-//====>//rtl8192_SetBWMode
-//    use in phy only (in win it's timer)
+//    use in phy only
 void SetBWModeCallback8192SUsb(struct net_device *dev)
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	u8	 			regBwOpMode;
 
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//u32				NowL, NowH;
-	//u8Byte				BeginTime, EndTime;
 	u8				regRRSR_RSC;
 
 	RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8190Pci()  Switch to %s bandwidth\n", \
@@ -3497,10 +3112,6 @@ void SetBWModeCallback8192SUsb(struct net_device *dev)
 	if(!priv->up)
 		return;
 
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//NowL = read_nic_dword(dev, TSFR);
-	//NowH = read_nic_dword(dev, TSFR+4);
-	//BeginTime = ((u8Byte)NowH << 32) + NowL;
 
 	//3<1>Set MAC register
 	regBwOpMode = read_nic_byte(dev, BW_OPMODE);
@@ -3510,13 +3121,11 @@ void SetBWModeCallback8192SUsb(struct net_device *dev)
 	{
 		case HT_CHANNEL_WIDTH_20:
 			regBwOpMode |= BW_OPMODE_20MHZ;
-		       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
 			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
 			break;
 
 		case HT_CHANNEL_WIDTH_20_40:
 			regBwOpMode &= ~BW_OPMODE_20MHZ;
-        		// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
 			write_nic_byte(dev, BW_OPMODE, regBwOpMode);
 
 			regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
@@ -3546,12 +3155,6 @@ void SetBWModeCallback8192SUsb(struct net_device *dev)
 			rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
 			rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
 
-			// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
-			//PHY_SetBBReg(Adapter, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
-			//PHY_SetBBReg(Adapter, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
-			//PHY_SetBBReg(Adapter, rCCK0_DebugPort, bMaskDWord, 0x00000409);
-			//PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, bADClkPhase, 0);
-
 			if (priv->card_8192_version >= VERSION_8192S_BCUT)
 				rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
 
@@ -3564,12 +3167,6 @@ void SetBWModeCallback8192SUsb(struct net_device *dev)
 	}
 	//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
 
-	// Added it for 20/40 mhz switch time evaluation by guangan 070531
-	//NowL = read_nic_dword(dev, TSFR);
-	//NowH = read_nic_dword(dev, TSFR+4);
-	//EndTime = ((u8Byte)NowH << 32) + NowL;
-	//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
-
 #if 1
 	//3<3>Set RF related register
 	switch( priv->rf_chip )
@@ -3597,7 +3194,6 @@ void SetBWModeCallback8192SUsb(struct net_device *dev)
 			break;
 
 		default:
-			//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
 			break;
 	}
 #endif
@@ -3705,7 +3301,6 @@ void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev)
 	priv->SetBWModeInProgress= FALSE;
 }
 
-//--------------------------Move to oter DIR later-------------------------------*/
 void InitialGain8192S(struct net_device *dev,	u8 Operation)
 {
 #ifdef TO_DO_LIST
@@ -3812,7 +3407,6 @@ bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE	FwCmdIO)
 
 	u16	FwCmdWaitLimit = 1000;
 
-	//if(IS_HARDWARE_TYPE_8192SU(Adapter) && Adapter->bInHctTest)
 	if(priv->bInHctTest)
 		return true;
 
@@ -3828,11 +3422,6 @@ bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE	FwCmdIO)
 #if 1
 	while(priv->SetFwCmdInProgress && FwCmdWaitCounter<FwCmdWaitLimit)
 	{
-		//if(RT_USB_CANNOT_IO(Adapter))
-		//{
-		//	RT_TRACE(COMP_CMD, DBG_WARNING, ("HalSetFwCmd8192S(): USB can NOT IO!!\n"));
-		//	return FALSE;
-		//}
 
 		RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): previous workitem not finish!!\n");
 		return false;
@@ -3843,9 +3432,7 @@ bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE	FwCmdIO)
 
 	if(FwCmdWaitCounter == FwCmdWaitLimit)
 	{
-		//RT_ASSERT(FALSE, ("SetFwCmdIOWorkItemCallback(): Wait too logn to set FW CMD\n"));
 		RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait too logn to set FW CMD\n");
-		//return false;
 	}
 #endif
 	if (priv->SetFwCmdInProgress)
@@ -3898,10 +3485,10 @@ void ChkFwCmdIoDone(struct net_device* dev)
 //
 void phy_SetFwCmdIOCallback(struct net_device* dev)
 {
-	//struct net_device* dev = (struct net_device*) data;
-	u32 	 	input;
-	static u32 ScanRegister;
 	struct r8192_priv *priv = ieee80211_priv(dev);
+	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
+	rt_firmware		*pFirmware = priv->pFirmware;
+	u32	input, CurrentAID = 0;;
 	if(!priv->up)
 	{
 		RT_TRACE(COMP_CMD, "SetFwCmdIOTimerCallback(): driver is going to unload\n");
@@ -3910,61 +3497,22 @@ void phy_SetFwCmdIOCallback(struct net_device* dev)
 
 	RT_TRACE(COMP_CMD, "--->SetFwCmdIOTimerCallback(): Cmd(%#x), SetFwCmdInProgress(%d)\n", priv->CurrentFwCmdIO, priv->SetFwCmdInProgress);
 
-	switch(priv->CurrentFwCmdIO)
+	if(pFirmware->FirmwareVersion >= 0x34)
 	{
-		case FW_CMD_HIGH_PWR_ENABLE:
-			if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
-				write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE);
-			break;
-
-		case FW_CMD_HIGH_PWR_DISABLE:
-			write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE);
-			break;
-
-		case FW_CMD_DIG_RESUME:
-			write_nic_dword(dev, WFM5, FW_DIG_RESUME);
-			break;
-
-		case FW_CMD_DIG_HALT:
-			write_nic_dword(dev, WFM5, FW_DIG_HALT);
-			break;
-
-		//
-		// <Roger_Notes> The following FW CMD IO was combined into single operation
-		// (i.e., to prevent number of system workitem out of resource!!).
-		// 2008.12.04.
-		//
-		case FW_CMD_RESUME_DM_BY_SCAN:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR enable and DIG resume!!\n");
-			if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
-			{
-				write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE); //break;
-				ChkFwCmdIoDone(dev);
-			}
-			write_nic_dword(dev, WFM5, FW_DIG_RESUME);
-			break;
-
-		case FW_CMD_PAUSE_DM_BY_SCAN:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR disable and DIG halt!!\n");
-			write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE); //break;
-			ChkFwCmdIoDone(dev);
-			write_nic_dword(dev, WFM5, FW_DIG_HALT);
+		switch(priv->CurrentFwCmdIO)
+		{
+			case FW_CMD_RA_REFRESH_N:
+				priv->CurrentFwCmdIO = FW_CMD_RA_REFRESH_N_COMB;
 			break;
-
-		//
-		// <Roger_Notes> The following FW CMD IO should be checked
-		// (i.e., workitem schedule timing issue!!).
-		// 2008.12.04.
-		//
-		case FW_CMD_DIG_DISABLE:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set DIG disable!!\n");
-			write_nic_dword(dev, WFM5, FW_DIG_DISABLE);
+			case FW_CMD_RA_REFRESH_BG:
+				priv->CurrentFwCmdIO = FW_CMD_RA_REFRESH_BG_COMB;
 			break;
-
-		case FW_CMD_DIG_ENABLE:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set DIG enable!!\n");
-			write_nic_dword(dev, WFM5, FW_DIG_ENABLE);
+			default:
 			break;
+		}
+	}
+	switch(priv->CurrentFwCmdIO)
+	{
 
 		case FW_CMD_RA_RESET:
 			write_nic_dword(dev, WFM5, FW_RA_RESET);
@@ -3975,82 +3523,111 @@ void phy_SetFwCmdIOCallback(struct net_device* dev)
 			break;
 
 		case FW_CMD_RA_REFRESH_N:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! N\n");
-			if(priv->ieee80211->pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA n refresh!!\n");
+			if(pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
 				input = FW_RA_REFRESH;
 			else
-				input = FW_RA_REFRESH | (priv->ieee80211->pHTInfo->IOTRaFunc << 8);
+				input = FW_RA_REFRESH | (pHTInfo->IOTRaFunc << 8);
 			write_nic_dword(dev, WFM5, input);
+			ChkFwCmdIoDone(dev);
+			write_nic_dword(dev, WFM5, FW_RA_ENABLE_RSSI_MASK);
+			ChkFwCmdIoDone(dev);
 			break;
 		case FW_CMD_RA_REFRESH_BG:
-			RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! B/G\n");
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA BG refresh!!\n");
 			write_nic_dword(dev, WFM5, FW_RA_REFRESH);
 			ChkFwCmdIoDone(dev);
-			write_nic_dword(dev, WFM5, FW_RA_ENABLE_BG);
+			write_nic_dword(dev, WFM5, FW_RA_DISABLE_RSSI_MASK);
+			ChkFwCmdIoDone(dev);
+			break;
+
+		case FW_CMD_RA_REFRESH_N_COMB:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA n Combo refresh!!\n");
+			if(pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
+				input = FW_RA_IOT_N_COMB;
+			else
+				input = FW_RA_IOT_N_COMB | (((pHTInfo->IOTRaFunc)&0x0f) << 8);
+			input = input |((pHTInfo->IOTPeer & 0xf) <<12);
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA/IOT Comb in n mode!! input(%#x)\n", input);
+			write_nic_dword(dev, WFM5, input);
+			ChkFwCmdIoDone(dev);
+			break;
+
+		case FW_CMD_RA_REFRESH_BG_COMB:
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA B/G Combo refresh!!\n");
+			if(pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
+				input = FW_RA_IOT_BG_COMB;
+			else
+				input = FW_RA_IOT_BG_COMB | (((pHTInfo->IOTRaFunc)&0x0f) << 8);
+			input = input |((pHTInfo->IOTPeer & 0xf) <<12);
+			RT_TRACE(COMP_CMD, "[FW CMD] Set RA/IOT Comb in B/G mode!! input(%#x)\n", input);
+			write_nic_dword(dev, WFM5, input);
+			ChkFwCmdIoDone(dev);
 			break;
 
 		case FW_CMD_IQK_ENABLE:
 			write_nic_dword(dev, WFM5, FW_IQK_ENABLE);
+			ChkFwCmdIoDone(dev);
 			break;
 
 		case FW_CMD_TXPWR_TRACK_ENABLE:
 			write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_ENABLE);
+			ChkFwCmdIoDone(dev);
 			break;
 
 		case FW_CMD_TXPWR_TRACK_DISABLE:
 			write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_DISABLE);
+			ChkFwCmdIoDone(dev);
 			break;
 
-		default:
-			RT_TRACE(COMP_CMD,"Unknown FW Cmd IO(%#x)\n", priv->CurrentFwCmdIO);
+		case FW_CMD_PAUSE_DM_BY_SCAN:
+			RT_TRACE(COMP_CMD,"[FW CMD] Pause DM by Scan!!\n");
+			rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17);
+			rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17);
+			rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40);
 			break;
-	}
-
-	ChkFwCmdIoDone(dev);
 
-	switch(priv->CurrentFwCmdIO)
-	{
+		case FW_CMD_RESUME_DM_BY_SCAN:
+			RT_TRACE(COMP_CMD, "[FW CMD] Resume DM by Scan!!\n");
+			rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83);
+			PHY_SetTxPowerLevel8192S(dev, priv->chan);
+			break;
 		case FW_CMD_HIGH_PWR_DISABLE:
-			//if(pMgntInfo->bTurboScan)
-			{
-				//Lower initial gain
-				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17);
-				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17);
-				// CCA threshold
-				rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40);
-				// Disable OFDM Part
-				rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x1);
-				ScanRegister = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector1,bMaskDWord);
-				rtl8192_setBBreg(dev, rOFDM0_RxDetector1, 0xf, 0xf);
-				rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
-			}
+			RT_TRACE(COMP_CMD, "[FW CMD] High Pwr Disable!!\n");
+			if(priv->DMFlag & HAL_DM_HIPWR_DISABLE)
+				break;
+			rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17);
+			rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17);
+			rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40);
 			break;
 
 		case FW_CMD_HIGH_PWR_ENABLE:
-			//if(pMgntInfo->bTurboScan)
-			{
-				rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x36);
-				rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x36);
+			RT_TRACE(COMP_CMD, "[FW CMD] High Pwr Enable!!\n");
+			if(priv->DMFlag & HAL_DM_HIPWR_DISABLE)
+				break;
+			rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83);
+			break;
 
-				// CCA threshold
-				rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83);
-				// Enable OFDM Part
-				rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x0);
+		case FW_CMD_LPS_ENTER:
+			RT_TRACE(COMP_CMD, "[FW CMD] Enter LPS mode!!\n");
+			CurrentAID = priv->ieee80211->assoc_id;
+			write_nic_dword(dev, WFM5, (FW_LPS_ENTER| ((CurrentAID|0xc000)<<8))    );
+			ChkFwCmdIoDone(dev);
+			pHTInfo->IOTAction |=  HT_IOT_ACT_DISABLE_EDCA_TURBO;
+			break;
 
-				//LZM ADD because sometimes there is no FW_CMD_HIGH_PWR_DISABLE, this value will be 0.
-				if(ScanRegister != 0){
-				rtl8192_setBBreg(dev, rOFDM0_RxDetector1, bMaskDWord, ScanRegister);
-				}
+		case FW_CMD_LPS_LEAVE:
+			RT_TRACE(COMP_CMD, "[FW CMD] Leave LPS mode!!\n");
+			write_nic_dword(dev, WFM5, FW_LPS_LEAVE );
+			ChkFwCmdIoDone(dev);
+			pHTInfo->IOTAction &=  (~HT_IOT_ACT_DISABLE_EDCA_TURBO);
+			break;
 
-				if(priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R)
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3);
-				else
-					rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x1);
-			}
+		default:
 			break;
 	}
 
-	priv->SetFwCmdInProgress = false;// Clear FW CMD operation flag.
+	priv->SetFwCmdInProgress = false;
 	RT_TRACE(COMP_CMD, "<---SetFwCmdIOWorkItemCallback()\n");
 
 }
diff --git a/drivers/staging/rtl8192su/r8192U.h b/drivers/staging/rtl8192su/r8192U.h
index eccf4478fba..741c6bf9a01 100644
--- a/drivers/staging/rtl8192su/r8192U.h
+++ b/drivers/staging/rtl8192su/r8192U.h
@@ -1,33 +1,40 @@
-/*
-   This is part of rtl8187 OpenSource driver.
-   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
-   Released under the terms of GPL (General Public Licence)
-
-   Parts of this driver are based on the GPL part of the
-   official realtek driver
-
-   Parts of this driver are based on the rtl8192 driver skeleton
-   from Patric Schenke & Andres Salomon
-
-   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-   We want to tanks the Authors of those projects and the Ndiswrapper
-   project Authors.
-*/
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ * Linux device driver for RTL8192U
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 
 #ifndef R819xU_H
 #define R819xU_H
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-//#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/netdevice.h>
-//#include <linux/pci.h>
 #include <linux/usb.h>
 #include <linux/etherdevice.h>
 #include <linux/delay.h>
@@ -51,9 +58,7 @@
 #define RTL819X_EEPROM_CMD_CK		(1 << 2)
 #define RTL819X_EEPROM_CMD_CS		(1 << 3)
 
-//#define RTL8192U
 #define RTL819xU_MODULE_NAME "rtl819xU"
-//added for HW security, john.0629
 #define FALSE 0
 #define TRUE 1
 #define MAX_KEY_LEN     61
@@ -114,6 +119,7 @@ do { if(rt_global_debug_component & component) \
 
 #define COMP_TRACE				BIT0		// For function call tracing.
 #define COMP_DBG				BIT1		// Only for temporary debug message.
+#define COMP_MLME				BIT1
 #define COMP_INIT				BIT2		// during driver initialization / halt / reset.
 
 
@@ -137,14 +143,14 @@ do { if(rt_global_debug_component & component) \
 #define COMP_SEC			        BIT20	// Event handling
 #define COMP_LED				BIT21	// For LED.
 #define COMP_RF					BIT22	// For RF.
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+#define COMP_RXDESC				BIT23
+
 #define COMP_RXDESC				BIT23	// Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
-//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
 #define COMP_FIRMWARE				BIT24	//for firmware downloading
 #define COMP_HT					BIT25	// For 802.11n HT related information. by Emily 2006-8-11
 #define COMP_AMSDU				BIT26	// For A-MSDU Debugging
+#define COMP_PS					BIT26
 
 #define COMP_SCAN				BIT27
 #define COMP_CMD				BIT28
@@ -159,8 +165,7 @@ do { if(rt_global_debug_component & component) \
                 printk( "Assertion failed! %s,%s,%s,line=%d\n", \
                 #expr,__FILE__,__FUNCTION__,__LINE__);          \
         }
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
+
 #define RT_DEBUG_DATA(level, data, datalen)      \
         do{ if ((rt_global_debug_component & (level)) == (level))   \
                 {       \
@@ -180,25 +185,17 @@ do { if(rt_global_debug_component & component) \
 #define RT_DEBUG_DATA(level, data, datalen) do {} while(0)
 #endif /* RTL8169_DEBUG */
 
-//#ifdef RTL8192SU
 	//2TODO: We should define 8192S firmware related macro settings here!!
 	#define RTL819X_DEFAULT_RF_TYPE				RF_1T2R
 	#define RTL819X_TOTAL_RF_PATH				2
 
-	//#define Rtl819XFwBootArray					Rtl8192UsbFwBootArray
-	//#define Rtl819XFwMainArray					Rtl8192UsbFwMainArray
-	//#define Rtl819XFwDataArray					Rtl8192UsbFwDataArray
-
 	#define Rtl819XMACPHY_Array_PG				Rtl8192UsbMACPHY_Array_PG
 	#define Rtl819XMACPHY_Array					Rtl8192UsbMACPHY_Array
 	#define Rtl819XPHY_REGArray					Rtl8192UsbPHY_REGArray
 	#define Rtl819XPHY_REG_1T2RArray				Rtl8192UsbPHY_REG_1T2RArray
-	//#define Rtl819XRadioA_Array					Rtl8192UsbRadioA_Array
-	//#define Rtl819XRadioB_Array					Rtl8192UsbRadioB_Array
 	#define Rtl819XRadioC_Array					Rtl8192UsbRadioC_Array
 	#define Rtl819XRadioD_Array					Rtl8192UsbRadioD_Array
 
-	//2008.11.06 Add.
 	#define Rtl819XFwImageArray					Rtl8192SUFwImgArray
 	#define Rtl819XMAC_Array						Rtl8192SUMAC_2T_Array
 	#define Rtl819XAGCTAB_Array					Rtl8192SUAGCTAB_Array
@@ -212,8 +209,6 @@ do { if(rt_global_debug_component & component) \
 	#define Rtl819XRadioB_GM_Array				Rtl8192SURadioB_GM_Array
 	#define Rtl819XRadioA_to1T_Array				Rtl8192SURadioA_to1T_Array
 	#define Rtl819XRadioA_to2T_Array				Rtl8192SURadioA_to2T_Array
-//#endif
-
 //
 // Queue Select Value in TxDesc
 //
@@ -256,7 +251,6 @@ do { if(rt_global_debug_component & component) \
 #define DESC90_RATEMCS15                        0x0f
 #define DESC90_RATEMCS32                        0x20
 
-//#ifdef RTL8192SU
 // CCK Rates, TxHT = 0
 #define DESC92S_RATE1M					0x00
 #define DESC92S_RATE2M					0x01
@@ -292,13 +286,12 @@ do { if(rt_global_debug_component & component) \
 #define DESC92S_RATEMCS15				0x1b
 #define DESC92S_RATEMCS15_SG			0x1c
 #define DESC92S_RATEMCS32				0x20
-//#endif
 
 #define RTL819X_DEFAULT_RF_TYPE RF_1T2R
 
 #define IEEE80211_WATCH_DOG_TIME    2000
 #define		PHY_Beacon_RSSI_SLID_WIN_MAX		10
-//for txpowertracking by amy
+//for txpowertracking
 #define 	OFDM_Table_Length	19
 #define	CCK_Table_length	12
 
@@ -522,7 +515,6 @@ typedef struct rtl8192_rx_info {
 	u8 out_pipe;
 }rtl8192_rx_info ;
 
-//typedef struct _RX_DESC_STATUS_8192SU{
 typedef struct rx_desc_819x_usb{
 	//DWORD 0
 	u16		Length:14;
@@ -582,77 +574,34 @@ typedef struct rx_desc_819x_usb{
 
 	//DWORD 5
 	u32		TSFL;
-//}RX_DESC_STATUS_8192SU, *PRX_DESC_STATUS_8192SU;
 }rx_desc_819x_usb, *prx_desc_819x_usb;
 
 
 //
 // Driver info are written to the begining of the RxBuffer
 //
-//typedef struct _RX_DRIVER_INFO_8192S{
 typedef struct rx_drvinfo_819x_usb{
-	//
-	// Driver info contain PHY status and other variabel size info
-	// PHY Status content as below
-	//
-
-	//DWORD 0
-	/*u4Byte			gain_0:7;
-	u4Byte			trsw_0:1;
-	u4Byte			gain_1:7;
-	u4Byte			trsw_1:1;
-	u4Byte			gain_2:7;
-	u4Byte			trsw_2:1;
-	u4Byte			gain_3:7;
-	u4Byte			trsw_3:1;	*/
 	u8			gain_trsw[4];
 
 	//DWORD 1
-	/*u4Byte			pwdb_all:8;
-	u4Byte			cfosho_0:8;
-	u4Byte			cfosho_1:8;
-	u4Byte			cfosho_2:8;*/
 	u8			pwdb_all;
 	u8			cfosho[4];
 
 	//DWORD 2
-	/*u4Byte			cfosho_3:8;
-	u4Byte			cfotail_0:8;
-	u4Byte			cfotail_1:8;
-	u4Byte			cfotail_2:8;*/
 	u8			cfotail[4];
 
 	//DWORD 3
-	/*u4Byte			cfotail_3:8;
-	u4Byte			rxevm_0:8;
-	u4Byte			rxevm_1:8;
-	u4Byte			rxsnr_0:8;*/
 	char			        rxevm[2];
 	char			        rxsnr[4];
 
 	//DWORD 4
-	/*u4Byte			rxsnr_1:8;
-	u4Byte			rxsnr_2:8;
-	u4Byte			rxsnr_3:8;
-	u4Byte			pdsnr_0:8;*/
 	u8			pdsnr[2];
 
 	//DWORD 5
-	/*u4Byte			pdsnr_1:8;
-	u4Byte			csi_current_0:8;
-	u4Byte			csi_current_1:8;
-	u4Byte			csi_target_0:8;*/
 	u8			csi_current[2];
 	u8			csi_target[2];
 
 	//DWORD 6
-	/*u4Byte			csi_target_1:8;
-	u4Byte			sigevm:8;
-	u4Byte			max_ex_pwr:8;
-	u4Byte			ex_intf_flag:1;
-	u4Byte			sgi_en:1;
-	u4Byte			rxsc:2;
-	u4Byte			reserve:4;*/
 	u8			sigevm;
 	u8			max_ex_pwr;
 	u8			ex_intf_flag:1;
@@ -669,10 +618,8 @@ typedef struct rx_drvinfo_819x_usb{
 
 #define MAX_DEV_ADDR_SIZE		8  /* support till 64 bit bus width OS */
 #define MAX_FIRMWARE_INFORMATION_SIZE   32 /*2006/04/30 by Emily forRTL8190*/
-//#define MAX_802_11_HEADER_LENGTH        (40 + MAX_FIRMWARE_INFORMATION_SIZE)
 #define ENCRYPTION_MAX_OVERHEAD		128
 #define	USB_HWDESC_HEADER_LEN		sizeof(tx_desc_819x_usb)
-//#define TX_PACKET_SHIFT_BYTES 	  	(USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
 #define MAX_FRAGMENT_COUNT		8
 #ifdef RTL8192U
 #define MAX_TRANSMIT_BUFFER_SIZE			8000
@@ -681,19 +628,15 @@ typedef struct rx_drvinfo_819x_usb{
 #endif
 #define scrclng					4		// octets for crc32 (FCS, ICV)
 
+#define		HAL_DM_DIG_DISABLE				BIT0
+#define		HAL_DM_HIPWR_DISABLE				BIT1
+
 typedef enum rf_optype
 {
 	RF_OP_By_SW_3wire = 0,
 	RF_OP_By_FW,
 	RF_OP_MAX
 }rf_op_type;
-/* 8190 Loopback Mode definition */
-typedef enum _rtl819xUsb_loopback{
-	RTL819xU_NO_LOOPBACK = 0,
-	RTL819xU_MAC_LOOPBACK = 1,
-	RTL819xU_DMA_LOOPBACK = 2,
-	RTL819xU_CCK_LOOPBACK = 3,
-}rtl819xUsb_loopback_e;
 
 /* for rtl819x */
 typedef enum _RT_STATUS{
@@ -703,16 +646,13 @@ typedef enum _RT_STATUS{
 	RT_STATUS_RESOURCE = 3
 }RT_STATUS,*PRT_STATUS;
 
-//#ifdef RTL8192SU
 typedef enum _RTL8192SUSB_LOOPBACK{
 	RTL8192SU_NO_LOOPBACK = 0,
 	RTL8192SU_MAC_LOOPBACK = 1,
 	RTL8192SU_DMA_LOOPBACK = 2,
 	RTL8192SU_CCK_LOOPBACK = 3,
 }RTL8192SUSB_LOOPBACK_E;
-//#endif
 
-//+by amy 080507
 #define MAX_RECEIVE_BUFFER_SIZE	9100	// Add this to 9100 bytes to receive A-MSDU from RT-AP
 
 
@@ -790,10 +730,6 @@ typedef struct rtl_reg_debug{
 typedef struct _rt_9x_tx_rate_history {
 	u32             cck[4];
 	u32             ofdm[8];
-	// HT_MCS[0][]: BW=0 SG=0
-	// HT_MCS[1][]: BW=1 SG=0
-	// HT_MCS[2][]: BW=0 SG=1
-	// HT_MCS[3][]: BW=1 SG=1
 	u32             ht_mcs[4][16];
 }rt_tx_rahis_t, *prt_tx_rahis_t;
 typedef struct _RT_SMOOTH_DATA_4RF {
@@ -808,11 +744,6 @@ typedef struct _RT_SMOOTH_DATA_4RF {
 typedef struct Stats
 {
 	unsigned long txrdu;
-//	unsigned long rxrdu;
-	//unsigned long rxnolast;
-	//unsigned long rxnodata;
-//	unsigned long rxreset;
-//	unsigned long rxnopointer;
 	unsigned long rxok;
 	unsigned long rxframgment;
 	unsigned long rxcmdpkt[4];		//08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
@@ -832,18 +763,8 @@ typedef struct Stats
 	unsigned long txnperr;
 	unsigned long txnpdrop;
 	unsigned long txresumed;
-//	unsigned long rxerr;
-//	unsigned long rxoverflow;
-//	unsigned long rxint;
 	unsigned long txnpokint;
-//	unsigned long txhpokint;
-//	unsigned long txhperr;
-//	unsigned long ints;
-//	unsigned long shints;
 	unsigned long txoverflow;
-//	unsigned long rxdmafail;
-//	unsigned long txbeacon;
-//	unsigned long txbeaconerr;
 	unsigned long txlpokint;
 	unsigned long txlpdrop;
 	unsigned long txlperr;
@@ -909,14 +830,11 @@ typedef struct Stats
 	u32	CurrentShowTxate;
 } Stats;
 
-
 // Bandwidth Offset
 #define HAL_PRIME_CHNL_OFFSET_DONT_CARE		0
 #define HAL_PRIME_CHNL_OFFSET_LOWER			1
 #define HAL_PRIME_CHNL_OFFSET_UPPER			2
 
-//+by amy 080507
-
 typedef struct 	ChnlAccessSetting {
 	u16 SIFS_Timer;
 	u16 DIFS_Timer;
@@ -956,14 +874,12 @@ typedef enum _RT_RF_TYPE_819xU{
         RF_PSEUDO_11N = 5,
 }RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
 
-//#ifdef RTL8192SU
 typedef enum _RF_POWER_STATE{
 	RF_ON,
 	RF_SLEEP,
 	RF_OFF,
 	RF_SHUT_DOWN,
 }RF_POWER_STATE, *PRF_POWER_STATE;
-//#endif
 
 typedef struct _rate_adaptive
 {
@@ -1014,7 +930,6 @@ typedef struct _init_gain
 	u8				cca;
 
 } init_gain, *pinit_gain;
-//by amy 0606
 
 typedef struct _phy_ofdm_rx_status_report_819xusb
 {
@@ -1066,8 +981,26 @@ typedef enum _RT_CUSTOMER_ID
 	RT_CID_Nettronix = 11,
 	RT_CID_DLINK = 12,
 	RT_CID_PRONET = 13,
+	RT_CID_COREGA = 14,
+	RT_CID_819x_ALPHA = 15,
+	RT_CID_819x_Sitecom = 16,
+	RT_CID_CCX = 17,
+	RT_CID_819x_Lenovo = 18,
+	RT_CID_819x_QMI = 19,
+	RT_CID_819x_Edimax_Belkin = 20,
+	RT_CID_819x_Sercomm_Belkin = 21,
+	RT_CID_819x_CAMEO1 = 22,
+	RT_CID_819x_MSI = 23,
+	RT_CID_819x_Acer = 24,
 }RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
 
+typedef enum _RT_OP_MODE{
+    RT_OP_MODE_AP,
+    RT_OP_MODE_INFRASTRUCTURE,
+    RT_OP_MODE_IBSS,
+    RT_OP_MODE_NO_LINK,
+}RT_OP_MODE, *PRT_OP_MODE;
+
 typedef enum _RESET_TYPE {
 	RESET_TYPE_NORESET = 0x00,
 	RESET_TYPE_NORMAL = 0x01,
@@ -1093,8 +1026,6 @@ typedef enum{
 	NIC_8192SU = 5,
 	} nic_t;
 
-//definded by WB. Ready to fill handlers for different NIC types.
-//add handle here when necessary.
 struct rtl819x_ops{
 	nic_t nic_type;
 	void (* rtl819x_read_eeprom_info)(struct net_device *dev);
@@ -1113,11 +1044,12 @@ typedef struct r8192_priv
 	struct rtl819x_ops* ops;
 	struct usb_device *udev;
 	/* added for maintain info from eeprom */
+	short epromtype;
 	u16 eeprom_vid;
 	u16 eeprom_pid;
 	u8  eeprom_CustomerID;
 	u8  eeprom_SubCustomerID;
-	u8  eeprom_ChannelPlan;
+	u16  eeprom_ChannelPlan;
 	RT_CUSTOMER_ID CustomerID;
 	LED_STRATEGY_819xUsb	LedStrategy;
 	u8  txqueue_to_outpipemap[9];
@@ -1129,76 +1061,55 @@ typedef struct r8192_priv
 	int irq;
 	struct ieee80211_device *ieee80211;
 
+	u8 RATRTableBitmap;
+
+	u32	IC_Cut;
 	short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
-	u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
-//	short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
+	u32 card_8192_version; /* if TCR reports card V B/C this discriminates */
 	short enable_gpio0;
 	enum card_type {PCI,MINIPCI,CARDBUS,USB}card_type;
 	short hw_plcp_len;
 	short plcp_preamble_mode;
 
 	spinlock_t irq_lock;
-//	spinlock_t irq_th_lock;
 	spinlock_t tx_lock;
 	spinlock_t ps_lock;
         struct mutex mutex;
+	bool ps_force;
 	spinlock_t rf_lock; //used to lock rf write operation added by wb
+	spinlock_t rf_ps_lock;
 
 	u16 irq_mask;
-//	short irq_enabled;
-//	struct net_device *dev; //comment this out.
 	short chan;
 	short sens;
 	short max_sens;
 
-
-	//	u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
-//	u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
-//	u8 cck_txpwr_base;
-//	u8 ofdm_txpwr_base;
-//	u8 challow[15]; //channels from 1 to 14, 0 not used
 	short up;
 	short crcmon; //if 1 allow bad crc frame reception in monitor mode
-//	short prism_hdr;
-
-//	struct timer_list scan_timer;
-	/*short scanpending;
-	short stopscan;*/
-//	spinlock_t scan_lock;
-//	u8 active_probe;
-	//u8 active_scan_num;
+	bool bSurpriseRemoved;
+
 	struct semaphore wx_sem;
 	struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
-//	short hw_wep;
 
-//	short digphy;
-//	short antb;
-//	short diversity;
-//	u8 cs_treshold;
-//	short rcr_csense;
 	u8 rf_type; //0 means 1T2R, 1 means 2T4R
 	RT_RF_TYPE_819xU rf_chip;
 
-//	u32 key0[4];
 	short (*rf_set_sens)(struct net_device *dev,short sens);
 	u8 (*rf_set_chan)(struct net_device *dev,u8 ch);
 	void (*rf_close)(struct net_device *dev);
 	void (*rf_init)(struct net_device *dev);
-	//short rate;
 	short promisc;
+        u32 mc_filter[2];
 	/*stats*/
 	struct Stats stats;
 	struct iw_statistics wstats;
 	struct proc_dir_entry *dir_dev;
 
 	/*RX stuff*/
-//	u32 *rxring;
-//	u32 *rxringtail;
-//	dma_addr_t rxringdma;
 	struct urb **rx_urb;
 	struct urb **rx_cmd_urb;
 
-/* modified by davad for Rx process */
+/* for Rx process */
        struct sk_buff_head rx_queue;
        struct sk_buff_head skb_queue;
 
@@ -1209,6 +1120,7 @@ typedef struct r8192_priv
 
 
 	struct tasklet_struct irq_rx_tasklet;
+	struct tasklet_struct irq_tx_tasklet;
 	struct urb *rxurb_task;
 
 	//2 Tx Related variables
@@ -1235,6 +1147,7 @@ typedef struct r8192_priv
 	struct 	ChnlAccessSetting  ChannelAccessSetting;
 
 	struct work_struct reset_wq;
+        struct work_struct mcast_wq;
 
 /**********************************************************/
 	//for rtl819xUsb
@@ -1244,21 +1157,28 @@ typedef struct r8192_priv
 	bool 	bDcut;
 	bool bCurrentRxAggrEnable;
 	u8 Rf_Mode; //add for Firmware RF -R/W switch
+	u8 FwRsvdTxPageCfg;
 	prt_firmware		pFirmware;
-	rtl819xUsb_loopback_e	LoopbackMode;
+	RTL8192SUSB_LOOPBACK_E	LoopbackMode;
 	bool usb_error;
 
 	u16 EEPROMTxPowerDiff;
 	u8 EEPROMThermalMeter;
 	u8 EEPROMPwDiff;
 	u8 EEPROMCrystalCap;
+	u8 EEPROMBluetoothCoexist;
 	u8 EEPROM_Def_Ver;
 	u8 EEPROMTxPowerLevelCCK;// CCK channel 1~14
 	u8 EEPROMTxPowerLevelCCK_V1[3];
 	u8 EEPROMTxPowerLevelOFDM24G[3]; // OFDM 2.4G channel 1~14
 	u8 EEPROMTxPowerLevelOFDM5G[24];	// OFDM 5G
 
-//RTL8192SU
+	u8 EEPROMOptional;
+	u8 ShowRateMode;
+	bool bForcedShowRxRate;
+
+	u32	RfRegChnlVal[2];
+
 	bool	bDmDisableProtect;
 	bool	bIgnoreDiffRateTxPowerOffset;
 
@@ -1278,6 +1198,9 @@ typedef struct r8192_priv
 	bool		EepromOrEfuse;
 	bool		bBootFromEfuse;	// system boot form EFUSE
 	u8  		EfuseMap[2][HWSET_MAX_SIZE_92S];
+	u16		EfuseUsedBytes;
+	u8		EfuseUsedPercentage;
+
 
 	u8  		EEPROMUsbOption;
 	u8  		EEPROMUsbPhyParam[5];
@@ -1290,6 +1213,8 @@ typedef struct r8192_priv
 	u8  		EEPROMTxPwrTkMode;
 
 	u8  		bTXPowerDataReadFromEEPORM;
+	u8		EEPROMRegulatory;
+	u8		EEPROMPwrGroup[2][3];
 
 	u8		EEPROMVersion;
 	u8		EEPROMUsbEndPointNumber;
@@ -1298,7 +1223,7 @@ typedef struct r8192_priv
 	u8	RfTxPwrLevelCck[2][14];
 	u8	RfTxPwrLevelOfdm1T[2][14];
 	u8	RfTxPwrLevelOfdm2T[2][14];
-	// 2009/01/20 MH Add for new EEPROM format.
+	// new EEPROM format.
 	u8					TxPwrHt20Diff[2][14];				// HT 20<->40 Pwr diff
 	u8					TxPwrLegacyHtDiff[2][14];		// For HT<->legacy pwr diff
 	u8					TxPwrbandEdgeHt40[2][2];		// Band edge for HY 40MHZlow/up channel
@@ -1310,7 +1235,6 @@ typedef struct r8192_priv
 	u8 				MidHighPwrTHR_L1;
 	u8 				MidHighPwrTHR_L2;
 	u8				TxPwrSafetyFlag;				// for Tx power safety spec
-//RTL8192SU
 
 /*PHY related*/
 	BB_REGISTER_DEFINITION_T	PHYRegDef[4];	//Radio A/B/C/D
@@ -1323,8 +1247,11 @@ typedef struct r8192_priv
 	u32	Pwr_Track;
 	u8	TxPowerDiff;
 	u8	AntennaTxPwDiff[2];				// Antenna gain offset, index 0 for B, 1 for C, and 2 for D
+	u8	ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+	u8	ThermalValue;
 	u8	CrystalCap;						// CrystalCap.
-	u8	ThermalMeter[2];				// ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
+	u8	BluetoothCoexist;
+	u8	ExternalPA;
 
 	u8	CckPwEnl;
 	// Use to calculate PWBD.
@@ -1337,24 +1264,22 @@ typedef struct r8192_priv
 	u8	SwChnlStep;
 	u8	SetBWModeInProgress;
 	HT_CHANNEL_WIDTH		CurrentChannelBW;
+	bool bChnlPlanFromHW;
 	u8      ChannelPlan;
+	u16	RegChannelPlan;
 	u8      pwrGroupCnt;
 	// 8190 40MHz mode
 	//
 	u8	nCur40MhzPrimeSC;	// Control channel sub-carrier
-	// Joseph test for shorten RF configuration time.
-	// We save RF reg0 in this variable to reduce RF reading.
-	//
+
 	u32					RfReg0Value[4];
 	u8 					NumTotalRFPath;
 	bool 				brfpath_rxenable[4];
 	//RF set related
 	bool				SetRFPowerStateInProgress;
-//+by amy 080507
+
 	struct timer_list watch_dog_timer;
 
-//+by amy 080515 for dynamic mechenism
-	//Add by amy Tx Power Control for Near/Far Range 2008/05/15
 	bool	bdynamic_txpower;  //bDynamicTxPower
 	bool	bDynamicTxHighPower;  // Tx high power state
 	bool	bDynamicTxLowPower;  // Tx low power state
@@ -1363,17 +1288,18 @@ typedef struct r8192_priv
 
 	bool	bstore_last_dtpflag;
 	bool	bstart_txctrl_bydtp;   //Define to discriminate on High power State or on sitesuvey to change Tx gain index
-	//Add by amy for Rate Adaptive
+
 	rate_adaptive rate_adaptive;
-	//Add by amy for TX power tracking
-	//2008/05/15  Mars OPEN/CLOSE TX POWER TRACKING
+	// TX power tracking
        txbbgain_struct txbbgain_table[TxBBGainTableLength];
        u8	EEPROMTxPowerTrackEnable;
 	u8			   txpower_count;//For 6 sec do tracking again
 	bool			   btxpower_trackingInit;
 	u8			   OFDM_index;
 	u8			   CCK_index;
-	//2007/09/10 Mars Add CCK TX Power Tracking
+	u8			   Record_CCK_20Mindex;
+	u8			   Record_CCK_40Mindex;
+	// CCK TX Power Tracking
 	ccktxbbgain_struct	cck_txbbgain_table[CCKTxBBGainTableLength];
 	ccktxbbgain_struct	cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
 	u8 rfa_txpowertrackingindex;
@@ -1390,10 +1316,15 @@ typedef struct r8192_priv
 	bool bcck_in_ch14;
 	bool btxpowerdata_readfromEEPORM;
 	u16 	TSSI_13dBm;
+	u8	CCKPresentAttentuation_20Mdefault;
+	u8	CCKPresentAttentuation_40Mdefault;
+	char	CCKPresentAttentuation_difference;
+	char	CCKPresentAttentuation;
+	bool bDMInitialGainEnable;
 	//For Backup Initial Gain
 	init_gain initgain_backup;
 	u8 DefaultInitialGain[4];
-	// For EDCA Turbo mode, Added by amy 080515.
+	// For EDCA Turbo mode
 	bool		bis_any_nonbepkts;
 	bool		bcurrent_turbo_EDCA;
 	bool		bis_cur_rdlstate;
@@ -1407,17 +1338,23 @@ typedef struct r8192_priv
 	u8	framesync;
 	u32 	framesyncC34;
 	u8   	framesyncMonitor;
-        	//Added by amy 080516  for RX related
+        	// RX related
 	u16 	nrxAMPDU_size;
 	u8 	nrxAMPDU_aggr_num;
 
-	//by amy for gpio
+	// gpio
 	 bool bHwRadioOff;
 
-	//by amy for reset_count
+	bool isRFOff;
+	bool bInPowerSaveMode;
+
+	bool RFChangeInProgress;
+	bool RegRfOff;
+	u8	bHwRfOffAction;
+
 	u32 reset_count;
 	bool bpbc_pressed;
-	//by amy for debug
+	// debug
 	u32 txpower_checkcnt;
 	u32 txpower_tracking_callback_cnt;
 	u8 thermal_read_val[40];
@@ -1426,7 +1363,7 @@ typedef struct r8192_priv
 	u32 ccktxpower_adjustcnt_ch14;
 	u8 tx_fwinfo_force_subcarriermode;
 	u8 tx_fwinfo_force_subcarrierval;
-	//by amy for silent reset
+	// silent reset
 	RESET_TYPE	ResetProgress;
 	bool		bForcedSilentReset;
 	bool		bDisableNormalResetCheck;
@@ -1435,11 +1372,11 @@ typedef struct r8192_priv
 	int		IrpPendingCount;
 	bool		bResetInProgress;
 	bool		force_reset;
+	bool		force_lps;
 	u8		InitialGainOperateType;
 
 	u16		SifsTime;
 
-	//define work item by amy 080526
 	struct delayed_work update_beacon_wq;
 	struct delayed_work watch_dog_wq;
 	struct delayed_work txpower_tracking_wq;
@@ -1448,8 +1385,7 @@ typedef struct r8192_priv
 	struct delayed_work initialgain_operate_wq;
 
 	struct workqueue_struct *priv_wq;
-//#ifdef RTL8192SU
-	//lzm add for 8192S
+
 	 u32 			IntrMask;
 	// RF and BB access related synchronization flags.
 	bool				bChangeBBInProgress; // BaseBand RW is still in progress.
@@ -1464,7 +1400,6 @@ typedef struct r8192_priv
 	u8				ThermalReadBackIndex;			//debug only
 	u8				ThermalReadVal[40];				//debug only
 
-	// For HCT test, 2005.07.15, by rcnjko.
 	// not realize true, just define it, set it 0 default, because some func use it
 	bool				bInHctTest;
 
@@ -1481,7 +1416,6 @@ typedef struct r8192_priv
 	char					RF_C_TxPwDiff;					// Antenna gain offset, rf-c to rf-a
 
 	bool	bRFSiOrPi;//0=si, 1=pi.
-	//lzm add for 8192S
 
 	bool SetFwCmdInProgress; //is set FW CMD in Progress? 92S only
 	u8 CurrentFwCmdIO;
@@ -1495,25 +1429,17 @@ typedef struct r8192_priv
 	LED_819xUsb			SwLed0;
 	LED_819xUsb			SwLed1;
         u8                              bRegUseLed;
-	struct work_struct		BlinkWorkItem; 
+	struct work_struct		BlinkWorkItem;
 	/* added for led control */
 	u16				FwCmdIOMap;
 	u32				FwCmdIOParam;
-	u8				DMFlag; 
+	u8				DMFlag;
 
 
 
 
 }r8192_priv;
 
-// for rtl8187
-// now mirging to rtl8187B
-/*
-typedef enum{
-	LOW_PRIORITY = 0x02,
-	NORM_PRIORITY
-	} priority_t;
-*/
 //for rtl8187B
 typedef enum{
 	BULK_PRIORITY = 0x01,
@@ -1542,6 +1468,9 @@ struct ssid_thread {
 };
 #endif
 
+void LedControl8192SUsb(struct net_device *dev, LED_CTL_MODE LedAction);
+void InitSwLeds(struct net_device *dev);
+void DeInitSwLeds(struct net_device *dev);
 short rtl8192SU_tx_cmd(struct net_device *dev, struct sk_buff *skb);
 short rtl8192SU_tx(struct net_device *dev, struct sk_buff* skb);
 bool FirmwareDownload92S(struct net_device *dev);
@@ -1567,7 +1496,6 @@ void rtl8192_rx_enable(struct net_device *);
 void rtl8192_tx_enable(struct net_device *);
 
 void rtl8192_disassociate(struct net_device *dev);
-//void fix_rx_fifo(struct net_device *dev);
 void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a);
 
 void rtl8192_set_anaparam(struct net_device *dev,u32 a);
@@ -1582,7 +1510,6 @@ void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
 void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
 void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
 void rtl8192_set_rxconf(struct net_device *dev);
-//short check_nic_enough_desc(struct net_device *dev, priority_t priority);
 extern void rtl819xusb_beacon_tx(struct net_device *dev,u16  tx_rate);
 void CamResetAllEntry(struct net_device* dev);
 void EnableHWSecurityConfig8192(struct net_device *dev);
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index 1b6890611fb..6970c97713d 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -27,6 +27,7 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/eeprom_93cx6.h>
+#include <linux/notifier.h>
 
 #undef LOOP_TEST
 #undef DUMP_RX
@@ -162,6 +163,8 @@ MODULE_PARM_DESC(channels," Channel bitmask for specific locales. NYI");
 static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id);
 static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf);
+static const struct net_device_ops rtl8192_netdev_ops;
+static struct notifier_block proc_netdev_notifier;
 
 static struct usb_driver rtl8192_usb_driver = {
 	.name		= RTL819xU_MODULE_NAME,	          /* Driver name   */
@@ -252,53 +255,49 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv)
 {
 	int i, max_chan=-1, min_chan=-1;
 	struct ieee80211_device* ieee = priv->ieee80211;
-	switch (channel_plan)
-	{
-		case COUNTRY_CODE_FCC:
-		case COUNTRY_CODE_IC:
-		case COUNTRY_CODE_ETSI:
-		case COUNTRY_CODE_SPAIN:
-		case COUNTRY_CODE_FRANCE:
-		case COUNTRY_CODE_MKK:
-		case COUNTRY_CODE_MKK1:
-		case COUNTRY_CODE_ISRAEL:
-		case COUNTRY_CODE_TELEC:
-		case COUNTRY_CODE_MIC:
-		{
-			Dot11d_Init(ieee);
-			ieee->bGlobalDomain = false;
-			//acturally 8225 & 8256 rf chip only support B,G,24N mode
-                        if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256) || (priv->rf_chip == RF_6052))
-			{
-				min_chan = 1;
-				max_chan = 14;
-			}
-			else
-			{
-				RT_TRACE(COMP_ERR, "unknown rf chip, can't set channel map in function:%s()\n", __FUNCTION__);
-			}
-			if (ChannelPlan[channel_plan].Len != 0){
-				// Clear old channel map
-				memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
-				// Set new channel map
-				for (i=0;i<ChannelPlan[channel_plan].Len;i++)
-				{
-					if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan)
-					break;
-					GET_DOT11D_INFO(ieee)->channel_map[ChannelPlan[channel_plan].Channel[i]] = 1;
-				}
-			}
-			break;
-		}
-		case COUNTRY_CODE_GLOBAL_DOMAIN:
-		{
-			GET_DOT11D_INFO(ieee)->bEnabled = 0;//this flag enabled to follow 11d country IE setting, otherwise, it shall follow global domain settings.
-			Dot11d_Reset(ieee);
-			ieee->bGlobalDomain = true;
-			break;
+
+	ieee->bGlobalDomain = false;
+	switch (priv->rf_chip) {
+	case RF_8225:
+	case RF_8256:
+	case RF_6052:
+		min_chan = 1;
+		max_chan = 14;
+		break;
+	default:
+		pr_err("%s(): unknown rf chip, can't set channel map\n",
+								__func__);
+		break;
+	}
+	if (ChannelPlan[channel_plan].Len != 0) {
+		memset(GET_DOT11D_INFO(ieee)->channel_map, 0,
+				sizeof(GET_DOT11D_INFO(ieee)->channel_map));
+
+		for (i = 0; i < ChannelPlan[channel_plan].Len; i++) {
+			if (ChannelPlan[channel_plan].Channel[i] < min_chan || ChannelPlan[channel_plan].Channel[i] > max_chan)
+				break;
+			GET_DOT11D_INFO(ieee)->channel_map[ChannelPlan[channel_plan].Channel[i]] = 1;
 		}
-		default:
-			break;
+	}
+	switch (channel_plan) {
+	case COUNTRY_CODE_GLOBAL_DOMAIN:
+		ieee->bGlobalDomain = true;
+		for (i = 12; i <= 14; i++)
+			GET_DOT11D_INFO(ieee)->channel_map[i] = 2;
+		ieee->IbssStartChnl = 10;
+		ieee->ibss_maxjoin_chal = 11;
+		break;
+	case COUNTRY_CODE_WORLD_WIDE_13:
+		printk(KERN_INFO "world wide 13\n");
+		for (i = 12; i <= 13; i++)
+			GET_DOT11D_INFO(ieee)->channel_map[i] = 2;
+		ieee->IbssStartChnl = 10;
+		ieee->ibss_maxjoin_chal = 11;
+		break;
+	default:
+		ieee->IbssStartChnl = 1;
+		ieee->ibss_maxjoin_chal = 14;
+		break;
 	}
 	return;
 }
@@ -991,15 +990,24 @@ static int proc_get_stats_rx(char *page, char **start,
 	return len;
 }
 
-void rtl8192_proc_module_init(void)
+int rtl8192_proc_module_init(void)
 {
+	int ret;
+
 	RT_TRACE(COMP_INIT, "Initializing proc filesystem");
 	rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, init_net.proc_net);
+	if (!rtl8192_proc)
+		return -ENOMEM;
+	ret = register_netdevice_notifier(&proc_netdev_notifier);
+	if (ret)
+		remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
+	return ret;
 }
 
 
 void rtl8192_proc_module_remove(void)
 {
+	unregister_netdevice_notifier(&proc_netdev_notifier);
 	remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
 }
 
@@ -1027,8 +1035,7 @@ void rtl8192_proc_remove_one(struct net_device *dev)
 		remove_proc_entry("registers-e", priv->dir_dev);
 	//	remove_proc_entry("cck-registers",priv->dir_dev);
 	//	remove_proc_entry("ofdm-registers",priv->dir_dev);
-		//remove_proc_entry(dev->name, rtl8192_proc);
-		remove_proc_entry("wlan0", rtl8192_proc);
+		remove_proc_entry(priv->dir_dev->name, rtl8192_proc);
 		priv->dir_dev = NULL;
 	}
 }
@@ -1145,6 +1152,25 @@ void rtl8192_proc_init_one(struct net_device *dev)
 		      dev->name);
 	}
 }
+
+static int proc_netdev_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+	struct net_device *net_dev = ptr;
+
+	if (net_dev->netdev_ops == &rtl8192_netdev_ops &&
+	    event == NETDEV_CHANGENAME) {
+		rtl8192_proc_remove_one(net_dev);
+		rtl8192_proc_init_one(net_dev);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block proc_netdev_notifier = {
+	.notifier_call = proc_netdev_event,
+};
+
 /****************************************************************************
    -----------------------------MISC STUFF-------------------------
 *****************************************************************************/
@@ -7355,6 +7381,8 @@ static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
         RT_TRACE(COMP_INIT, "Oops: i'm coming\n");
 
 	dev = alloc_ieee80211(sizeof(struct r8192_priv));
+	if (dev == NULL)
+		return -ENOMEM;
 
 	usb_set_intfdata(intf, dev);
 	SET_NETDEV_DEV(dev, &intf->dev);
@@ -7392,7 +7420,8 @@ static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
 	netif_carrier_off(dev);
 	netif_stop_queue(dev);
 
-	register_netdev(dev);
+	if (register_netdev(dev))
+		goto fail;
 	RT_TRACE(COMP_INIT, "dev name=======> %s\n",dev->name);
 	rtl8192_proc_init_one(dev);
 
@@ -7474,35 +7503,63 @@ static int __init rtl8192_usb_module_init(void)
 	ret = ieee80211_crypto_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_init() failed %d\n", ret);
-		return ret;
+		goto fail_crypto;
 	}
 
 	ret = ieee80211_crypto_tkip_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_tkip_init() failed %d\n",
 			ret);
-		return ret;
+		goto fail_crypto_tkip;
 	}
 
 	ret = ieee80211_crypto_ccmp_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_ccmp_init() failed %d\n",
 			ret);
-		return ret;
+		goto fail_crypto_ccmp;
 	}
 
 	ret = ieee80211_crypto_wep_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_wep_init() failed %d\n", ret);
-		return ret;
+		goto fail_crypto_wep;
 	}
 
 	printk(KERN_INFO "\nLinux kernel driver for RTL8192 based WLAN cards\n");
 	printk(KERN_INFO "Copyright (c) 2007-2008, Realsil Wlan\n");
 	RT_TRACE(COMP_INIT, "Initializing module");
 	RT_TRACE(COMP_INIT, "Wireless extensions version %d", WIRELESS_EXT);
-	rtl8192_proc_module_init();
-	return usb_register(&rtl8192_usb_driver);
+
+	ret = rtl8192_proc_module_init();
+	if (ret) {
+		pr_err("rtl8192_proc_module_init() failed %d\n", ret);
+		goto fail_proc;
+	}
+
+	ret = usb_register(&rtl8192_usb_driver);
+	if (ret) {
+		pr_err("usb_register() failed %d\n", ret);
+		goto fail_usb;
+	}
+
+	return 0;
+
+fail_usb:
+	rtl8192_proc_module_remove();
+fail_proc:
+	ieee80211_crypto_wep_exit();
+fail_crypto_wep:
+	ieee80211_crypto_ccmp_exit();
+fail_crypto_ccmp:
+	ieee80211_crypto_tkip_exit();
+fail_crypto_tkip:
+	ieee80211_crypto_deinit();
+fail_crypto:
+#ifdef CONFIG_IEEE80211_DEBUG
+	ieee80211_debug_exit();
+#endif
+	return ret;
 }
 
 
diff --git a/drivers/staging/rtl8192su/r8192U_dm.c b/drivers/staging/rtl8192su/r8192U_dm.c
index fa5e24416dd..ce7e1ee4c3a 100644
--- a/drivers/staging/rtl8192su/r8192U_dm.c
+++ b/drivers/staging/rtl8192su/r8192U_dm.c
@@ -2673,7 +2673,6 @@ static void dm_check_edca_turbo(
 {
 	struct r8192_priv *priv = ieee80211_priv(dev);
 	PRT_HIGH_THROUGHPUT	pHTInfo = priv->ieee80211->pHTInfo;
-	//PSTA_QOS			pStaQos = pMgntInfo->pStaQos;
 
 	// Keep past Tx/Rx packet count for RT-to-RT EDCA turbo.
 	static unsigned long			lastTxOkCnt = 0;
@@ -2681,10 +2680,8 @@ static void dm_check_edca_turbo(
 	unsigned long				curTxOkCnt = 0;
 	unsigned long				curRxOkCnt = 0;
 
-	//
-	// Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters
-	// should follow the settings from QAP. By Bruce, 2007-12-07.
-	//
+	u32				EDCA_BE_UL = edca_setting_UL[pHTInfo->IOTPeer];
+	u32				EDCA_BE_DL = edca_setting_DL[pHTInfo->IOTPeer];
 	#if 1
 	if(priv->ieee80211->state != IEEE80211_LINKED)
 		goto dm_CheckEdcaTurbo_EXIT;
@@ -2693,6 +2690,14 @@ static void dm_check_edca_turbo(
 	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)
 		goto dm_CheckEdcaTurbo_EXIT;
 
+	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_FORCED_ENABLE_BE_TXOP)
+	{
+		if(!(EDCA_BE_UL & 0xffff0000))
+			EDCA_BE_UL |= 0x005e0000;
+		if(!(EDCA_BE_DL & 0xffff0000))
+			EDCA_BE_DL |= 0x005e0000;
+	}
+
 	{
 		u8* peername[11] = {"unknown", "realtek", "realtek_92se", "broadcom", "ralink", "atheros", "cisco", "marvell", "92u_softap", "self_softap"};
 		static int wb_tmp = 0;
@@ -2714,7 +2719,7 @@ static void dm_check_edca_turbo(
 			{
 				if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
 				{
-					write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
+					write_nic_dword(dev, EDCAPARA_BE, EDCA_BE_UL);
 					priv->bis_cur_rdlstate = false;
 				}
 			}
@@ -2722,7 +2727,7 @@ static void dm_check_edca_turbo(
 			{
 				if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
 				{
-					write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
+					write_nic_dword(dev, EDCAPARA_BE, EDCA_BE_DL);
 					priv->bis_cur_rdlstate = true;
 				}
 			}
@@ -2734,7 +2739,7 @@ static void dm_check_edca_turbo(
 			{
 				if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
 				{
-					write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]);
+					write_nic_dword(dev, EDCAPARA_BE, EDCA_BE_DL);
 					priv->bis_cur_rdlstate = true;
 				}
 			}
@@ -2742,7 +2747,7 @@ static void dm_check_edca_turbo(
 			{
 				if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA)
 				{
-					write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]);
+					write_nic_dword(dev, EDCAPARA_BE, EDCA_BE_UL);
 					priv->bis_cur_rdlstate = false;
 				}
 			}
@@ -2771,7 +2776,7 @@ static void dm_check_edca_turbo(
 					(((u32)(qos_parameters->cw_max[0]))<< AC_PARAM_ECW_MAX_OFFSET)|
 					(((u32)(qos_parameters->cw_min[0]))<< AC_PARAM_ECW_MIN_OFFSET)|
 					((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
-			//write_nic_dword(dev, WDCAPARA_ADD[i], u4bAcParam);
+
 				write_nic_dword(dev, EDCAPARA_BE,  u4bAcParam);
 
 			// Check ACM bit.
@@ -2780,7 +2785,7 @@ static void dm_check_edca_turbo(
 			// TODO:  Modified this part and try to set acm control in only 1 IO processing!!
 
 					PACI_AIFSN	pAciAifsn = (PACI_AIFSN)&(qos_parameters->aifs[0]);
-					u8		AcmCtrl = read_nic_byte( dev, AcmHwCtrl );
+					u8		AcmCtrl = priv->AcmControl | 0x1;
 					if( pAciAifsn->f.ACM )
 					{ // ACM bit is 1.
 						AcmCtrl |= AcmHw_BeqEn;
@@ -2804,7 +2809,7 @@ dm_CheckEdcaTurbo_EXIT:
 	priv->ieee80211->bis_any_nonbepkts = false;
 	lastTxOkCnt = priv->stats.txbytesunicast;
 	lastRxOkCnt = priv->stats.rxbytesunicast;
-}	// dm_CheckEdcaTurbo
+}
 #endif
 
 extern void DM_CTSToSelfSetting(struct net_device * dev,u32 DM_Type, u32 DM_Value)
diff --git a/drivers/staging/rtl8192su/r8192U_wx.c b/drivers/staging/rtl8192su/r8192U_wx.c
index a7cc6f9a473..2005b811eba 100644
--- a/drivers/staging/rtl8192su/r8192U_wx.c
+++ b/drivers/staging/rtl8192su/r8192U_wx.c
@@ -1,21 +1,23 @@
-/*
-   This file contains wireless extension handlers.
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ * Linux device driver for RTL8192U
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 
-   This is part of rtl8180 OpenSource driver.
-   Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
-   Released under the terms of GPL (General Public Licence)
-
-   Parts of this driver are based on the GPL part
-   of the official realtek driver.
-
-   Parts of this driver are based on the rtl8180 driver skeleton
-   from Patric Schenke & Andres Salomon.
-
-   Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
-   We want to tanks the Authors of those projects and the Ndiswrapper
-   project Authors.
-*/
 
 #include <linux/string.h>
 #include "r8192U.h"
@@ -248,6 +250,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
         struct r8192_priv *priv = ieee80211_priv(dev);
         struct ieee80211_device *ieee = priv->ieee80211;
         struct ieee80211_network *target;
+	struct ieee80211_network *latest = NULL;
 	int name_len;
 
         down(&priv->wx_sem);
@@ -259,13 +262,20 @@ static int r8192_wx_get_ap_status(struct net_device *dev,
         list_for_each_entry(target, &ieee->network_list, list) {
                 if ( (target->ssid_len == name_len) &&
 		     (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){
-			if(target->wpa_ie_len>0 || target->rsn_ie_len>0 )
-				//set flags=1 to indicate this ap is WPA
-				wrqu->data.flags = 1;
-			else wrqu->data.flags = 0;
+			if ((latest == NULL) ||(target->last_scanned > latest->last_scanned))
+				latest = target;
+
+		}
+        }
 
+        if(latest != NULL)
+        {
+		wrqu->data.length = latest->SignalStrength;
 
-		break;
+		if(latest->wpa_ie_len>0 || latest->rsn_ie_len>0 ) {
+			wrqu->data.flags = 1;
+		} else {
+			wrqu->data.flags = 0;
                 }
         }
 
@@ -460,14 +470,6 @@ static int rtl8180_wx_get_range(struct net_device *dev,
 	range->we_version_compiled = WIRELESS_EXT;
 	range->we_version_source = 16;
 
-//	range->retry_capa;	/* What retry options are supported */
-//	range->retry_flags;	/* How to decode max/min retry limit */
-//	range->r_time_flags;	/* How to decode max/min retry life */
-//	range->min_retry;	/* Minimal number of retries */
-//	range->max_retry;	/* Maximal number of retries */
-//	range->min_r_time;	/* Minimal retry lifetime */
-//	range->max_r_time;	/* Maximal retry lifetime */
-
 
 	for (i = 0, val = 0; i < 14; i++) {
 
@@ -1011,6 +1013,70 @@ static int r8192_wx_set_mlme(struct net_device *dev,
 	return ret;
 }
 
+static int r8192_wx_set_pmkid(struct net_device *dev,
+                                        struct iw_request_info *info,
+                                        union iwreq_data *wrqu, char *extra)
+{
+	int i;
+	struct r8192_priv *priv = ieee80211_priv(dev);
+	struct ieee80211_device* ieee = priv->ieee80211;
+	struct iw_pmksa*  pPMK = (struct iw_pmksa*)extra;
+	int	intReturn = false;
+
+	switch (pPMK->cmd)
+	{
+		case IW_PMKSA_ADD:
+			for (i = 0; i < NUM_PMKID_CACHE; i++)
+			{
+				if (memcmp(ieee->PMKIDList[i].Bssid, pPMK->bssid.sa_data, ETH_ALEN) == 0)
+				{
+                    			memcpy(ieee->PMKIDList[i].PMKID, pPMK->pmkid, IW_PMKID_LEN);
+					memcpy(ieee->PMKIDList[i].Bssid, pPMK->bssid.sa_data, ETH_ALEN);
+					ieee->PMKIDList[i].bUsed = true;
+					intReturn = true;
+					goto __EXIT__;
+				}
+			}
+
+			for (i = 0; i < NUM_PMKID_CACHE; i++)
+			{
+				if (ieee->PMKIDList[i].bUsed == false)
+				{
+					memcpy(ieee->PMKIDList[i].PMKID, pPMK->pmkid, IW_PMKID_LEN);
+					memcpy(ieee->PMKIDList[i].Bssid, pPMK->bssid.sa_data, ETH_ALEN);
+					ieee->PMKIDList[i].bUsed = true;
+					intReturn = true;
+					goto __EXIT__;
+				}
+			}
+			break;
+
+		case IW_PMKSA_REMOVE:
+			for (i = 0; i < NUM_PMKID_CACHE; i++)
+			{
+				if (memcmp(ieee->PMKIDList[i].Bssid, pPMK->bssid.sa_data, ETH_ALEN) == true)
+				{
+					memset(&ieee->PMKIDList[i], 0x00, sizeof(RT_PMKID_LIST));
+					intReturn = true;
+					break;
+				}
+	        }
+			break;
+
+		case IW_PMKSA_FLUSH:
+			memset(&ieee->PMKIDList[0], 0x00, (sizeof(RT_PMKID_LIST) * NUM_PMKID_CACHE));
+            intReturn = true;
+			break;
+
+		default:
+			break;
+	}
+
+__EXIT__:
+	return (intReturn);
+
+}
+
 static int r8192_wx_set_gen_ie(struct net_device *dev,
                                         struct iw_request_info *info,
                                         union iwreq_data *data, char *extra)
@@ -1093,7 +1159,7 @@ static iw_handler r8192_wx_handlers[] =
 	NULL,//r8192_wx_get_auth,//NULL, 			/* SIOCSIWAUTH */
 	r8192_wx_set_enc_ext, 			/* SIOCSIWENCODEEXT */
 	NULL,//r8192_wx_get_enc_ext,//NULL, 			/* SIOCSIWENCODEEXT */
-	NULL, 			/* SIOCSIWPMKSA */
+	r8192_wx_set_pmkid, /* SIOCSIWPMKSA */
 	NULL, 			 /*---hole---*/
 
 };
diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.c b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
index a8e9d2d96f5..7ab9e22f895 100644
--- a/drivers/staging/rtl8192su/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.c
@@ -1,13 +1,22 @@
-/*
- * (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
+/******************************************************************************
+ * Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
+ * Linux device driver for RTL8192U
  *
- * Module: r819xusb_cmdpkt.c
- * (RTL8190 TX/RX command packet handler Source C File)
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
  *
- * Note: The module is responsible for handling TX and RX command packet.
- * 1.TX: Send set and query configuration command packet.
- * 2.RX: Receive tx feedback, beacon state, query configuration, command packet.
- */
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+******************************************************************************/
 #include "r8192U.h"
 #include "r819xU_cmdpkt.h"
 
@@ -19,19 +28,13 @@ bool SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
 	cb_desc		    *tcb_desc;
 	unsigned char	    *ptr_buf;
 
-	/* PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK); */
-
 	/*
 	 * Get TCB and local buffer from common pool.
 	 * (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
 	 */
 	skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
-	if (skb == NULL) {
-		RT_TRACE(COMP_ERR, "(%s): unable to alloc skb buffer\n",
-								__func__);
-		rtStatus = false;
-		return rtStatus;
-	}
+	if (!skb)
+		return false;
 	memcpy((unsigned char *)(skb->cb), &dev, sizeof(dev));
 	tcb_desc = (cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
 	tcb_desc->queue_index = TXCMD_QUEUE;
@@ -51,7 +54,6 @@ bool SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
 			priv->ieee80211->softmac_hard_start_xmit(skb, dev);
 		}
 
-	//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
 	return rtStatus;
 }
 
@@ -224,7 +226,6 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
 	if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) {
 		//2 maybe need endian transform?
 		rx_intr_status.interrupt_status = *((u32 *)(pmsg + 4));
-		//rx_intr_status.InterruptStatus = N2H4BYTE(*((UINT32 *)(pMsg + 4)));
 
 		DMESG("interrupt status = 0x%x\n", rx_intr_status.interrupt_status);
 
@@ -491,6 +492,13 @@ cmpk_message_handle_rx(
 			cmpk_handle_tx_rate_history(dev, pcmd_buff);
 			cmd_length = CMPK_TX_RAHIS_SIZE;
 			break;
+		case RX_TX_TSSI_MEAN_BACK:
+			{
+				u32	*pMsg;
+				pMsg = (u32 *)pcmd_buff;
+			}
+			cmd_length = 32;
+			break;
 		default:
 			 RT_TRACE(COMP_ERR, "(%s): unknown CMD Element\n",
 								__func__);
diff --git a/drivers/staging/rtl8192su/r819xU_cmdpkt.h b/drivers/staging/rtl8192su/r819xU_cmdpkt.h
index d3c56155188..95885bee7a4 100644
--- a/drivers/staging/rtl8192su/r819xU_cmdpkt.h
+++ b/drivers/staging/rtl8192su/r819xU_cmdpkt.h
@@ -173,6 +173,7 @@ typedef enum tag_command_packet_directories {
     RX_DBGINFO_FEEDBACK = 5,
     RX_TX_PER_PKT_FEEDBACK = 6,
     RX_TX_RATE_HISTORY = 7,
+    RX_TX_TSSI_MEAN_BACK = 8,
     RX_CMD_ELE_MAX
 } cmpk_element_e;
 
diff --git a/drivers/staging/rtl8192u/Kconfig b/drivers/staging/rtl8192u/Kconfig
index 0439c90b416..28969198e7e 100644
--- a/drivers/staging/rtl8192u/Kconfig
+++ b/drivers/staging/rtl8192u/Kconfig
@@ -3,5 +3,6 @@ config RTL8192U
 	depends on PCI && WLAN && USB
 	select WIRELESS_EXT
 	select WEXT_PRIV
+	select CRYPTO
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192u/dot11d.h b/drivers/staging/rtl8192u/dot11d.h
index 0851b9db17a..d99cc030ec7 100644
--- a/drivers/staging/rtl8192u/dot11d.h
+++ b/drivers/staging/rtl8192u/dot11d.h
@@ -2,7 +2,7 @@
 #define __INC_DOT11D_H
 
 #ifdef ENABLE_DOT11D
-#include "ieee80211.h"
+#include "ieee80211/ieee80211.h"
 
 
 typedef struct _CHNL_TXPOWER_TRIPLE {
diff --git a/drivers/staging/rtl8192u/ieee80211.h b/drivers/staging/rtl8192u/ieee80211.h
deleted file mode 100644
index 9c726113214..00000000000
--- a/drivers/staging/rtl8192u/ieee80211.h
+++ /dev/null
@@ -1,2595 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
- *
- * Modified for Realtek's wi-fi cards by Andrea Merello
- * <andreamrl@tiscali.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h>   /* ARRAY_SIZE */
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/sched.h>
-
-#include <linux/delay.h>
-#include <linux/wireless.h>
-
-#include "ieee80211/rtl819x_HT.h"
-#include "ieee80211/rtl819x_BA.h"
-#include "ieee80211/rtl819x_TS.h"
-
-
-#ifndef IW_MODE_MONITOR
-#define IW_MODE_MONITOR 6
-#endif
-
-#ifndef IWEVCUSTOM
-#define IWEVCUSTOM 0x8c02
-#endif
-
-
-#ifndef container_of
-/**
- * container_of - cast a member of a structure out to the containing structure
- *
- * @ptr:        the pointer to the member.
- * @type:       the type of the container struct this is embedded in.
- * @member:     the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({                      \
-	const typeof(((type *)0)->member) (*__mptr = (ptr));    \
-	(type *)((char *)__mptr - offsetof(type, member)); })
-#endif
-
-#define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40		0x1
-#define KEY_TYPE_TKIP		0x2
-#define KEY_TYPE_CCMP		0x4
-#define KEY_TYPE_WEP104		0x5
-
-/* added for rtl819x tx procedure */
-#define MAX_QUEUE_SIZE		0x10
-
-/*
- * 8190 queue mapping
- */
-#define BK_QUEUE                               0
-#define BE_QUEUE                               1
-#define VI_QUEUE                               2
-#define VO_QUEUE                               3
-#define HCCA_QUEUE                             4
-#define TXCMD_QUEUE                            5
-#define MGNT_QUEUE                             6
-#define HIGH_QUEUE                             7
-#define BEACON_QUEUE                           8
-
-#define LOW_QUEUE                              BE_QUEUE
-#define NORMAL_QUEUE                           MGNT_QUEUE
-
-/* added by amy for ps */
-#define SWRF_TIMEOUT				50
-
-/* added by amy for LEAP related */
-#define IE_CISCO_FLAG_POSITION		0x08	/* Flag byte: byte 8, numbered from 0. */
-#define SUPPORT_CKIP_MIC			0x08	/* bit3 */
-#define SUPPORT_CKIP_PK			0x10	/* bit4 */
-/* defined for skb cb field */
-/* At most 28 byte */
-typedef struct cb_desc {
-	/* Tx Desc Related flags (8-9) */
-	u8 bLastIniPkt:1;
-	u8 bCmdOrInit:1;
-	u8 bFirstSeg:1;
-	u8 bLastSeg:1;
-	u8 bEncrypt:1;
-	u8 bTxDisableRateFallBack:1;
-	u8 bTxUseDriverAssingedRate:1;
-	u8 bHwSec:1; /* indicate whether use Hw security. WB */
-
-	u8 reserved1;
-
-	/* Tx Firmware Relaged flags (10-11)*/
-	u8 bCTSEnable:1;
-	u8 bRTSEnable:1;
-	u8 bUseShortGI:1;
-	u8 bUseShortPreamble:1;
-	u8 bTxEnableFwCalcDur:1;
-	u8 bAMPDUEnable:1;
-	u8 bRTSSTBC:1;
-	u8 RTSSC:1;
-
-	u8 bRTSBW:1;
-	u8 bPacketBW:1;
-	u8 bRTSUseShortPreamble:1;
-	u8 bRTSUseShortGI:1;
-	u8 bMulticast:1;
-	u8 bBroadcast:1;
-	u8 drv_agg_enable:1;
-	u8 reserved2:1;
-
-	/* Tx Desc related element(12-19) */
-	u8 rata_index;
-	u8 queue_index;
-	u16 txbuf_size;
-	u8 RATRIndex;
-	u8 reserved6;
-	u8 reserved7;
-	u8 reserved8;
-
-	/* Tx firmware related element(20-27) */
-	u8 data_rate;
-	u8 rts_rate;
-	u8 ampdu_factor;
-	u8 ampdu_density;
-	u8 DrvAggrNum;
-	u16 pkt_size;
-	u8 reserved12;
-} cb_desc, *pcb_desc;
-
-/*--------------------------Define -------------------------------------------*/
-#define MGN_1M                  0x02
-#define MGN_2M                  0x04
-#define MGN_5_5M                0x0b
-#define MGN_11M                 0x16
-
-#define MGN_6M                  0x0c
-#define MGN_9M                  0x12
-#define MGN_12M                 0x18
-#define MGN_18M                 0x24
-#define MGN_24M                 0x30
-#define MGN_36M                 0x48
-#define MGN_48M                 0x60
-#define MGN_54M                 0x6c
-
-#define MGN_MCS0                0x80
-#define MGN_MCS1                0x81
-#define MGN_MCS2                0x82
-#define MGN_MCS3                0x83
-#define MGN_MCS4                0x84
-#define MGN_MCS5                0x85
-#define MGN_MCS6                0x86
-#define MGN_MCS7                0x87
-#define MGN_MCS8                0x88
-#define MGN_MCS9                0x89
-#define MGN_MCS10               0x8a
-#define MGN_MCS11               0x8b
-#define MGN_MCS12               0x8c
-#define MGN_MCS13               0x8d
-#define MGN_MCS14               0x8e
-#define MGN_MCS15               0x8f
-
-/*
- *		802.11 Management frame Reason Code field
- */
-enum	_ReasonCode{
-	unspec_reason	= 0x1,
-	auth_not_valid	= 0x2,
-	deauth_lv_ss	= 0x3,
-	inactivity		= 0x4,
-	ap_overload 	= 0x5,
-	class2_err		= 0x6,
-	class3_err		= 0x7,
-	disas_lv_ss 	= 0x8,
-	asoc_not_auth	= 0x9,
-
-	/* ----MIC_CHECK */
-	mic_failure 	= 0xe,
-	/* ----END MIC_CHECK */
-
-	/* Reason code defined in 802.11i D10.0 p.28. */
-	invalid_IE		= 0x0d,
-	four_way_tmout	= 0x0f,
-	two_way_tmout	= 0x10,
-	IE_dismatch 	= 0x11,
-	invalid_Gcipher = 0x12,
-	invalid_Pcipher = 0x13,
-	invalid_AKMP	= 0x14,
-	unsup_RSNIEver = 0x15,
-	invalid_RSNIE	= 0x16,
-	auth_802_1x_fail = 0x17,
-	ciper_reject		= 0x18,
-
-	/* Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. */
-	QoS_unspec		= 0x20, /* 32 */
-	QAP_bandwidth	= 0x21, /* 33 */
-	poor_condition	= 0x22, /* 34 */
-	no_facility 	= 0x23, /* 35 */
-							/* Where is 36??? */
-	req_declined	= 0x25, /* 37 */
-	invalid_param	= 0x26, /* 38 */
-	req_not_honored = 0x27,	/* 39 */
-	TS_not_created	= 0x2F, /* 47 */
-	DL_not_allowed	= 0x30, /* 48 */
-	dest_not_exist	= 0x31, /* 49 */
-	dest_not_QSTA	= 0x32, /* 50 */
-};
-
-
-
-#define aSifsTime	 ((priv->ieee80211->current_network.mode == IEEE_A) || \
-		(priv->ieee80211->current_network.mode == IEEE_N_24G) || \
-		(priv->ieee80211->current_network.mode == IEEE_N_5G)) ? 16 : 10
-
-#define MGMT_QUEUE_NUM 5
-
-#define IEEE_CMD_SET_WPA_PARAM			1
-#define	IEEE_CMD_SET_WPA_IE			2
-#define IEEE_CMD_SET_ENCRYPTION			3
-#define IEEE_CMD_MLME				4
-
-#define IEEE_PARAM_WPA_ENABLED			1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
-#define IEEE_PARAM_DROP_UNENCRYPTED		3
-#define IEEE_PARAM_PRIVACY_INVOKED		4
-#define IEEE_PARAM_AUTH_ALGS			5
-#define IEEE_PARAM_IEEE_802_1X			6
-/* It should consistent with the driver_XXX.c */
-#define IEEE_PARAM_WPAX_SELECT			7
-/* Added for notify the encryption type selection */
-#define IEEE_PROTO_WPA				1
-#define IEEE_PROTO_RSN				2
-/* Added for notify the encryption type selection */
-#define IEEE_WPAX_USEGROUP			0
-#define IEEE_WPAX_WEP40				1
-#define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
-#define IEEE_WPAX_CCMP				4
-#define IEEE_WPAX_WEP104			5
-
-#define IEEE_KEY_MGMT_IEEE8021X			1
-#define IEEE_KEY_MGMT_PSK			2
-
-#define IEEE_MLME_STA_DEAUTH			1
-#define IEEE_MLME_STA_DISASSOC			2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
-#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED	4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
-#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED	6
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
-
-
-#define	IEEE_CRYPT_ALG_NAME_LEN			16
-
-#define MAX_IE_LEN  0xff
-
-/* added for kernel conflict */
-#define ieee80211_crypt_deinit_entries 	ieee80211_crypt_deinit_entries_rsl
-#define ieee80211_crypt_deinit_handler 	ieee80211_crypt_deinit_handler_rsl
-#define ieee80211_crypt_delayed_deinit 	ieee80211_crypt_delayed_deinit_rsl
-#define ieee80211_register_crypto_ops  	ieee80211_register_crypto_ops_rsl
-#define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
-#define ieee80211_get_crypto_ops 	ieee80211_get_crypto_ops_rsl
-
-#define ieee80211_ccmp_null		ieee80211_ccmp_null_rsl
-
-#define ieee80211_tkip_null		ieee80211_tkip_null_rsl
-
-#define ieee80211_wep_null		ieee80211_wep_null_rsl
-
-#define free_ieee80211          	free_ieee80211_rsl
-#define alloc_ieee80211        		alloc_ieee80211_rsl
-
-#define ieee80211_rx 			ieee80211_rx_rsl
-#define ieee80211_rx_mgt		ieee80211_rx_mgt_rsl
-
-#define ieee80211_get_beacon		ieee80211_get_beacon_rsl
-#define ieee80211_wake_queue		ieee80211_wake_queue_rsl
-#define ieee80211_stop_queue		ieee80211_stop_queue_rsl
-#define ieee80211_reset_queue		ieee80211_reset_queue_rsl
-#define ieee80211_softmac_stop_protocol	ieee80211_softmac_stop_protocol_rsl
-#define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
-#define ieee80211_is_shortslot		ieee80211_is_shortslot_rsl
-#define ieee80211_is_54g		ieee80211_is_54g_rsl
-#define ieee80211_wpa_supplicant_ioctl	ieee80211_wpa_supplicant_ioctl_rsl
-#define ieee80211_ps_tx_ack		ieee80211_ps_tx_ack_rsl
-#define ieee80211_softmac_xmit		ieee80211_softmac_xmit_rsl
-#define ieee80211_stop_send_beacons	ieee80211_stop_send_beacons_rsl
-#define notify_wx_assoc_event		notify_wx_assoc_event_rsl
-#define SendDisassociation		SendDisassociation_rsl
-#define ieee80211_disassociate		ieee80211_disassociate_rsl
-#define ieee80211_start_send_beacons	ieee80211_start_send_beacons_rsl
-#define ieee80211_stop_scan		ieee80211_stop_scan_rsl
-#define ieee80211_send_probe_requests	ieee80211_send_probe_requests_rsl
-#define ieee80211_softmac_scan_syncro	ieee80211_softmac_scan_syncro_rsl
-#define ieee80211_start_scan_syncro	ieee80211_start_scan_syncro_rsl
-
-#define ieee80211_wx_get_essid		ieee80211_wx_get_essid_rsl
-#define ieee80211_wx_set_essid		ieee80211_wx_set_essid_rsl
-#define ieee80211_wx_set_rate		ieee80211_wx_set_rate_rsl
-#define ieee80211_wx_get_rate		ieee80211_wx_get_rate_rsl
-#define ieee80211_wx_set_wap		ieee80211_wx_set_wap_rsl
-#define ieee80211_wx_get_wap		ieee80211_wx_get_wap_rsl
-#define ieee80211_wx_set_mode		ieee80211_wx_set_mode_rsl
-#define ieee80211_wx_get_mode		ieee80211_wx_get_mode_rsl
-#define ieee80211_wx_set_scan		ieee80211_wx_set_scan_rsl
-#define ieee80211_wx_get_freq		ieee80211_wx_get_freq_rsl
-#define ieee80211_wx_set_freq		ieee80211_wx_set_freq_rsl
-#define ieee80211_wx_set_rawtx		ieee80211_wx_set_rawtx_rsl
-#define ieee80211_wx_get_name		ieee80211_wx_get_name_rsl
-#define ieee80211_wx_set_power		ieee80211_wx_set_power_rsl
-#define ieee80211_wx_get_power		ieee80211_wx_get_power_rsl
-#define ieee80211_wlan_frequencies	ieee80211_wlan_frequencies_rsl
-#define ieee80211_wx_set_rts		ieee80211_wx_set_rts_rsl
-#define ieee80211_wx_get_rts		ieee80211_wx_get_rts_rsl
-
-#define ieee80211_txb_free		ieee80211_txb_free_rsl
-
-#define ieee80211_wx_set_gen_ie		ieee80211_wx_set_gen_ie_rsl
-#define ieee80211_wx_get_scan		ieee80211_wx_get_scan_rsl
-#define ieee80211_wx_set_encode		ieee80211_wx_set_encode_rsl
-#define ieee80211_wx_get_encode		ieee80211_wx_get_encode_rsl
-#if WIRELESS_EXT >= 18
-#define ieee80211_wx_set_mlme		ieee80211_wx_set_mlme_rsl
-#define ieee80211_wx_set_auth		ieee80211_wx_set_auth_rsl
-#define ieee80211_wx_set_encode_ext	ieee80211_wx_set_encode_ext_rsl
-#define ieee80211_wx_get_encode_ext	ieee80211_wx_get_encode_ext_rsl
-#endif
-
-
-typedef struct ieee_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-	union {
-		struct {
-			u8 name;
-			u32 value;
-		} wpa_param;
-		struct {
-			u32 len;
-			u8 reserved[32];
-			u8 data[0];
-		} wpa_ie;
-		struct{
-			int command;
-			int reason_code;
-		} mlme;
-		struct {
-			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
-			u8 set_tx;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-	} u;
-} ieee_param;
-
-
-#if WIRELESS_EXT < 17
-#define IW_QUAL_QUAL_INVALID   0x10
-#define IW_QUAL_LEVEL_INVALID  0x20
-#define IW_QUAL_NOISE_INVALID  0x40
-#define IW_QUAL_QUAL_UPDATED   0x1
-#define IW_QUAL_LEVEL_UPDATED  0x2
-#define IW_QUAL_NOISE_UPDATED  0x4
-#endif
-
-
-/* linux under 2.6.9 release may not support it, so modify it for common use */
-#define MSECS(t) msecs_to_jiffies(t)
-#define msleep_interruptible_rsl  msleep_interruptible
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-#define IEEE80211_1ADDR_LEN 10
-#define IEEE80211_2ADDR_LEN 16
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define MIN_FRAG_THRESHOLD     256U
-#define MAX_FRAG_THRESHOLD     2346U
-
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_VERS		0x0003
-#define IEEE80211_FCTL_FTYPE		0x000c
-#define IEEE80211_FCTL_STYPE		0x00f0
-#define IEEE80211_FCTL_FRAMETYPE	0x00fc
-#define IEEE80211_FCTL_TODS		0x0100
-#define IEEE80211_FCTL_FROMDS		0x0200
-#define IEEE80211_FCTL_DSTODS		0x0300
-#define IEEE80211_FCTL_MOREFRAGS	0x0400
-#define IEEE80211_FCTL_RETRY		0x0800
-#define IEEE80211_FCTL_PM		0x1000
-#define IEEE80211_FCTL_MOREDATA		0x2000
-#define IEEE80211_FCTL_WEP		0x4000
-#define IEEE80211_FCTL_ORDER		0x8000
-
-#define IEEE80211_FTYPE_MGMT		0x0000
-#define IEEE80211_FTYPE_CTL		0x0004
-#define IEEE80211_FTYPE_DATA		0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ	0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 	0x0010
-#define IEEE80211_STYPE_REASSOC_REQ	0x0020
-#define IEEE80211_STYPE_REASSOC_RESP	0x0030
-#define IEEE80211_STYPE_PROBE_REQ	0x0040
-#define IEEE80211_STYPE_PROBE_RESP	0x0050
-#define IEEE80211_STYPE_BEACON		0x0080
-#define IEEE80211_STYPE_ATIM		0x0090
-#define IEEE80211_STYPE_DISASSOC	0x00A0
-#define IEEE80211_STYPE_AUTH		0x00B0
-#define IEEE80211_STYPE_DEAUTH		0x00C0
-#define IEEE80211_STYPE_MANAGE_ACT	0x00D0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL		0x00A0
-#define IEEE80211_STYPE_RTS		0x00B0
-#define IEEE80211_STYPE_CTS		0x00C0
-#define IEEE80211_STYPE_ACK		0x00D0
-#define IEEE80211_STYPE_CFEND		0x00E0
-#define IEEE80211_STYPE_CFENDACK	0x00F0
-#define IEEE80211_STYPE_BLOCKACK   0x0094
-
-/* data */
-#define IEEE80211_STYPE_DATA		0x0000
-#define IEEE80211_STYPE_DATA_CFACK	0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL	0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
-#define IEEE80211_STYPE_NULLFUNC	0x0040
-#define IEEE80211_STYPE_CFACK		0x0050
-#define IEEE80211_STYPE_CFPOLL		0x0060
-#define IEEE80211_STYPE_CFACKPOLL	0x0070
-#define IEEE80211_STYPE_QOS_DATA	0x0080
-#define IEEE80211_STYPE_QOS_NULL	0x00C0
-
-#define IEEE80211_SCTL_FRAG		0x000F
-#define IEEE80211_SCTL_SEQ		0xFFF0
-
-/* QOS control */
-#define IEEE80211_QCTL_TID              0x000F
-
-#define	FC_QOS_BIT					BIT7
-#define IsDataFrame(pdu)			(((pdu[0] & 0x0C) == 0x08) ? true : false)
-#define	IsLegacyDataFrame(pdu)	(IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)))
-
-#define IsQoSDataFrame(pframe)  ((*(u16 *)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
-#define Frame_Order(pframe)     (*(u16 *)pframe&IEEE80211_FCTL_ORDER)
-#define SN_LESS(a, b)		(((a-b)&0x800) != 0)
-#define SN_EQUAL(a, b)	(a == b)
-#define MAX_DEV_ADDR_SIZE 8
-typedef enum _ACT_CATEGORY{
-	ACT_CAT_QOS = 1,
-	ACT_CAT_DLS = 2,
-	ACT_CAT_BA  = 3,
-	ACT_CAT_HT  = 7,
-	ACT_CAT_WMM = 17,
-} ACT_CATEGORY, *PACT_CATEGORY;
-
-typedef enum _TS_ACTION{
-	ACT_ADDTSREQ = 0,
-	ACT_ADDTSRSP = 1,
-	ACT_DELTS    = 2,
-	ACT_SCHEDULE = 3,
-} TS_ACTION, *PTS_ACTION;
-
-typedef enum _BA_ACTION{
-	ACT_ADDBAREQ = 0,
-	ACT_ADDBARSP = 1,
-	ACT_DELBA    = 2,
-} BA_ACTION, *PBA_ACTION;
-
-typedef enum _InitialGainOpType{
-	IG_Backup = 0,
-	IG_Restore,
-	IG_Max
-} InitialGainOpType;
-
-/* debug macros */
-#define CONFIG_IEEE80211_DEBUG
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
-/* wb added to debug out data buf
- * if you want print DATA buffer related BA, please set ieee80211_debug_level
- * to DATA|BA
- */
-#define IEEE80211_DEBUG_DATA(level, data, datalen)	\
-	do { if ((ieee80211_debug_level & (level)) == (level)) { 	\
-			int i;					\
-			u8* pdata = (u8 *) data;			\
-			printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__);	\
-			for (i = 0; i < (int)(datalen); i++) {		\
-				printk("%2x ", pdata[i]);		\
-				if ((i+1)%16 == 0) \
-					printk("\n");	\
-			}	\
-			printk("\n");			\
-		}					\
-	} while (0)
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while (0)
-#endif	/* CONFIG_IEEE80211_DEBUG */
-
-/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
-
-/*
- * To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- *
- * If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-
-#define IEEE80211_DL_HT		   (1<<10)  /* HT */
-#define IEEE80211_DL_BA		   (1<<11)  /* ba */
-#define IEEE80211_DL_TS		   (1<<12)  /* TS */
-#define IEEE80211_DL_QOS           (1<<13)
-#define IEEE80211_DL_REORDER	   (1<<14)
-#define IEEE80211_DL_IOT	   (1<<15)
-#define IEEE80211_DL_IPS	   (1<<16)
-#define IEEE80211_DL_TRACE	   (1<<29)  /* trace function, need to user net_ratelimit() together in order not to print too much to the screen */
-#define IEEE80211_DL_DATA	   (1<<30)   /* use this flag to control whether print data buf out. */
-#define IEEE80211_DL_ERR	   (1<<31)   /* always open */
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#define IEEE80211_DEBUG_QOS(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
-
-#ifdef CONFIG_IEEE80211_DEBUG
-/* Added by Annie, 2005-11-22. */
-#define MAX_STR_LEN     64
-/* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
-#define PRINTABLE(_ch)  (_ch > '!' && _ch < '~')
-#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)                            	\
-			if ((_Comp) & level) {                                                                       \
-				int             __i;                                            \
-				u8  buffer[MAX_STR_LEN];                                    	\
-				int length = (_Len < MAX_STR_LEN) ? _Len : (MAX_STR_LEN - 1);  	\
-				memset(buffer, 0, MAX_STR_LEN);                      		\
-				memcpy(buffer, (u8 *)_Ptr, length);            		\
-				for (__i = 0; __i < MAX_STR_LEN; __i++) {                                                               \
-				     if (!PRINTABLE(buffer[__i]))   \
-						buffer[__i] = '?';     	\
-				}                                                               \
-				buffer[length] = '\0';                                          \
-				printk("Rtl819x: ");                                         	\
-				printk(_TitleString);                                         \
-				printk(": %d, <%s>\n", _Len, buffer);                         \
-			}
-#else
-#define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len)  do {} while (0)
-#endif
-
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		/* enable iwspy support */
-#endif
-#include <net/iw_handler.h>	/* new driver API */
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-	u8    dsap;   /* always 0xAA */
-	u8    ssap;   /* always 0xAA */
-	u8    ctrl;   /* always 0x03 */
-	u8    oui[P80211_OUI_LEN];    /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_LEAP 2
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_IBSS (1<<1)
-#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
-#define WLAN_CAPABILITY_PRIVACY (1<<4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
-#define WLAN_CAPABILITY_PBCC (1<<6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
-#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
-#define WLAN_CAPABILITY_QOS (1<<9)
-#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
-
-/* 802.11g ERP information element */
-#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
-#define WLAN_ERP_USE_PROTECTION (1<<1)
-#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
-
-/* Status codes */
-enum ieee80211_statuscode {
-	WLAN_STATUS_SUCCESS = 0,
-	WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
-	WLAN_STATUS_CAPS_UNSUPPORTED = 10,
-	WLAN_STATUS_REASSOC_NO_ASSOC = 11,
-	WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
-	WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
-	WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
-	WLAN_STATUS_CHALLENGE_FAIL = 15,
-	WLAN_STATUS_AUTH_TIMEOUT = 16,
-	WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
-	WLAN_STATUS_ASSOC_DENIED_RATES = 18,
-	/* 802.11b */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
-	WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
-	WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
-	/* 802.11h */
-	WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
-	WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
-	/* 802.11g */
-	WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
-	WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
-	/* 802.11i */
-	WLAN_STATUS_INVALID_IE = 40,
-	WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
-	WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
-	WLAN_STATUS_INVALID_AKMP = 43,
-	WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
-	WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
-	WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
-};
-
-/* Reason codes */
-enum ieee80211_reasoncode {
-	WLAN_REASON_UNSPECIFIED = 1,
-	WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
-	WLAN_REASON_DEAUTH_LEAVING = 3,
-	WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
-	WLAN_REASON_DISASSOC_AP_BUSY = 5,
-	WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
-	WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
-	WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
-	WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
-	/* 802.11h */
-	WLAN_REASON_DISASSOC_BAD_POWER = 10,
-	WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
-	/* 802.11i */
-	WLAN_REASON_INVALID_IE = 13,
-	WLAN_REASON_MIC_FAILURE = 14,
-	WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
-	WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
-	WLAN_REASON_IE_DIFFERENT = 17,
-	WLAN_REASON_INVALID_GROUP_CIPHER = 18,
-	WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
-	WLAN_REASON_INVALID_AKMP = 20,
-	WLAN_REASON_UNSUPP_RSN_VERSION = 21,
-	WLAN_REASON_INVALID_RSN_IE_CAP = 22,
-	WLAN_REASON_IEEE8021X_FAILED = 23,
-	WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
-};
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_LEN  		4
-#define IEEE80211_CCK_RATE_1MB			0x02
-#define IEEE80211_CCK_RATE_2MB			0x04
-#define IEEE80211_CCK_RATE_5MB			0x0B
-#define IEEE80211_CCK_RATE_11MB			0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
-#define IEEE80211_OFDM_RATE_6MB			0x0C
-#define IEEE80211_OFDM_RATE_9MB			0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK		0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-	IEEE80211_CCK_RATE_5MB_MASK | \
-	IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-				IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES		    4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-
-/* this is stolen and modified from the madwifi driver*/
-#define IEEE80211_FC0_TYPE_MASK		0x0c
-#define IEEE80211_FC0_TYPE_DATA		0x08
-#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
-#define IEEE80211_FC0_SUBTYPE_QOS	0x80
-
-#define IEEE80211_QOS_HAS_SEQ(fc) \
-	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
-	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num[17];
-	u16 frag_num[17];
-	unsigned long packet_time[17];
-	struct list_head list;
-};
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
-struct ieee80211_rx_stats {
-	u32 mac_time[2];
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u64 tsf;
-	u32 beacon_time;
-	u8 nic_type;
-	u16       Length;
-	u8        SignalQuality; /* in 0-100 index. */
-	s32       RecvSignalPower; /* Real power in dBm for this packet, no beautification and aggregation. */
-	s8        RxPower; /* in dBm Translate from PWdB */
-	u8        SignalStrength; /* in 0-100 index. */
-	u16       bHwError:1;
-	u16       bCRC:1;
-	u16       bICV:1;
-	u16       bShortPreamble:1;
-	u16       Antenna:1;      /* for rtl8185 */
-	u16       Decrypted:1;    /* for rtl8185, rtl8187 */
-	u16       Wakeup:1;       /* for rtl8185 */
-	u16       Reserved0:1;    /* for rtl8185 */
-	u8        AGC;
-	u32       TimeStampLow;
-	u32       TimeStampHigh;
-	bool      bShift;
-	bool      bIsQosData;
-	u8        UserPriority;
-
-	/*
-	 * 1Attention Please!!!<11n or 8190 specific code should be put below this line>
-	 */
-
-	u8        RxDrvInfoSize;
-	u8        RxBufShift;
-	bool      bIsAMPDU;
-	bool      bFirstMPDU;
-	bool      bContainHTC;
-	bool      RxIs40MHzPacket;
-	u32       RxPWDBAll;
-	u8        RxMIMOSignalStrength[4];        /* in 0~100 index */
-	s8        RxMIMOSignalQuality[2];
-	bool      bPacketMatchBSSID;
-	bool      bIsCCK;
-	bool      bPacketToSelf;
-	u8	*virtual_address;
-	u16          packetlength;              /* Total packet length: Must equal to sum of all FragLength */
-	u16          fraglength;                        /* FragLength should equal to PacketLength in non-fragment case */
-	u16          fragoffset;                        /* Data offset for this fragment */
-	u16          ntotalfrag;
-	bool      	  bisrxaggrsubframe;
-	bool		  bPacketBeacon;	/* cosa add for rssi */
-	bool		  bToSelfBA;		/* cosa add for rssi */
-	char 	  cck_adc_pwdb[4];	/* cosa add for rx path selection */
-	u16		  Seq_Num;
-
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#include "ieee80211_crypt.h"
-
-#define SEC_KEY_1         (1<<0)
-#define SEC_KEY_2         (1<<1)
-#define SEC_KEY_3         (1<<2)
-#define SEC_KEY_4         (1<<3)
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL         (1<<7)
-#define SEC_ENABLED       (1<<8)
-#define SEC_ENCRYPT       (1<<9)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
-#define SEC_ALG_NONE            0
-#define SEC_ALG_WEP             1
-#define SEC_ALG_TKIP            2
-#define SEC_ALG_CCMP            3
-
-#define WEP_KEYS 		4
-#define WEP_KEY_LEN		13
-#define SCM_KEY_LEN             32
-#define SCM_TEMPORAL_KEY_LENGTH 16
-
-struct ieee80211_security {
-	u16 active_key:2,
-	    enabled:1,
-	    auth_mode:2,
-	    auth_algo:4,
-	    unicast_uses_group:1,
-	    encrypt:1;
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][SCM_KEY_LEN];
-	u8 level;
-	u16 flags;
-} __attribute__ ((packed));
-
-
-/*
- 802.11 data frame from AP
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-Total: 28-2340 bytes
-*/
-
-/* Management Frame Information Element Types */
-enum ieee80211_mfie {
-	MFIE_TYPE_SSID = 0,
-	MFIE_TYPE_RATES = 1,
-	MFIE_TYPE_FH_SET = 2,
-	MFIE_TYPE_DS_SET = 3,
-	MFIE_TYPE_CF_SET = 4,
-	MFIE_TYPE_TIM = 5,
-	MFIE_TYPE_IBSS_SET = 6,
-	MFIE_TYPE_COUNTRY = 7,
-	MFIE_TYPE_HOP_PARAMS = 8,
-	MFIE_TYPE_HOP_TABLE = 9,
-	MFIE_TYPE_REQUEST = 10,
-	MFIE_TYPE_CHALLENGE = 16,
-	MFIE_TYPE_POWER_CONSTRAINT = 32,
-	MFIE_TYPE_POWER_CAPABILITY = 33,
-	MFIE_TYPE_TPC_REQUEST = 34,
-	MFIE_TYPE_TPC_REPORT = 35,
-	MFIE_TYPE_SUPP_CHANNELS = 36,
-	MFIE_TYPE_CSA = 37,
-	MFIE_TYPE_MEASURE_REQUEST = 38,
-	MFIE_TYPE_MEASURE_REPORT = 39,
-	MFIE_TYPE_QUIET = 40,
-	MFIE_TYPE_IBSS_DFS = 41,
-	MFIE_TYPE_ERP = 42,
-	MFIE_TYPE_RSN = 48,
-	MFIE_TYPE_RATES_EX = 50,
-	MFIE_TYPE_HT_CAP = 45,
-	MFIE_TYPE_HT_INFO = 61,
-	MFIE_TYPE_AIRONET = 133,
-	MFIE_TYPE_GENERIC = 221,
-	MFIE_TYPE_QOS_PARAMETER = 222,
-};
-
-/* Minimal header; can be used for passing 802.11 frames with sufficient
- * information to determine what type of underlying data type is actually
- * stored in the data. */
-struct ieee80211_hdr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_1addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_2addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addrqos {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u8 payload[0];
-	__le16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct ieee80211_authentication {
-	struct ieee80211_hdr_3addr header;
-	__le16 algorithm;
-	__le16 transaction;
-	__le16 status;
-	/*challenge*/
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc {
-	struct ieee80211_hdr_3addr header;
-	__le16 reason;
-} __attribute__ ((packed));
-
-struct ieee80211_probe_request {
-	struct ieee80211_hdr_3addr header;
-	/* SSID, supported rates */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_hdr_3addr header;
-	u32 time_stamp[2];
-	__le16 beacon_interval;
-	__le16 capability;
-	/* SSID, supported rates, FH params, DS params,
-	 * CF params, IBSS params, TIM (if beacon), RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
-struct ieee80211_assoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	/* SSID, supported rates, RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_reassoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	u8 current_ap[ETH_ALEN];
-	/* SSID, supported rates, RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response_frame {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 status;
-	__le16 aid;
-	struct ieee80211_info_element info_element[0]; /* supported rates */
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u8 queue_index;
-	u8 rts_included;
-	u16 reserved;
-	__le16 frag_size;
-	__le16 payload_size;
-	struct sk_buff *fragments[0];
-};
-
-#define MAX_TX_AGG_COUNT		  16
-struct ieee80211_drv_agg_txb {
-	u8 nr_drv_agg_frames;
-	struct sk_buff *tx_agg_frames[MAX_TX_AGG_COUNT];
-} __attribute__((packed));
-
-#define MAX_SUBFRAME_COUNT 		  64
-struct ieee80211_rxb {
-	u8 nr_subframes;
-	struct sk_buff *subframes[MAX_SUBFRAME_COUNT];
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-} __attribute__((packed));
-
-typedef union _frameqos {
-	u16 shortdata;
-	u8  chardata[2];
-	struct {
-		u16 tid:4;
-		u16 eosp:1;
-		u16 ack_policy:2;
-		u16 reserved:1;
-		u16 txop:8;
-	} field;
-} frameqos, *pframeqos;
-
-/* SWEEP TABLE ENTRIES NUMBER*/
-#define MAX_SWEEP_TAB_ENTRIES		  42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
-/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH                  ((u8)12)
-#define MAX_RATES_EX_LENGTH               ((u8)16)
-#define MAX_NETWORK_COUNT                  128
-
-#define MAX_CHANNEL_NUMBER                 161
-#define IEEE80211_SOFTMAC_SCAN_TIME	   100
-/* (HZ / 2) */
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
-
-#define CRC_LENGTH                 4U
-
-#define MAX_WPA_IE_LEN 64
-
-#define NETWORK_EMPTY_ESSID (1<<0)
-#define NETWORK_HAS_OFDM    (1<<1)
-#define NETWORK_HAS_CCK     (1<<2)
-
-/* QoS structure */
-#define NETWORK_HAS_QOS_PARAMETERS      (1<<3)
-#define NETWORK_HAS_QOS_INFORMATION     (1<<4)
-#define NETWORK_HAS_QOS_MASK            (NETWORK_HAS_QOS_PARAMETERS | \
-					 NETWORK_HAS_QOS_INFORMATION)
-/* 802.11h */
-#define NETWORK_HAS_POWER_CONSTRAINT    (1<<5)
-#define NETWORK_HAS_CSA                 (1<<6)
-#define NETWORK_HAS_QUIET               (1<<7)
-#define NETWORK_HAS_IBSS_DFS            (1<<8)
-#define NETWORK_HAS_TPC_REPORT          (1<<9)
-
-#define NETWORK_HAS_ERP_VALUE           (1<<10)
-
-#define QOS_QUEUE_NUM                   4
-#define QOS_OUI_LEN                     3
-#define QOS_OUI_TYPE                    2
-#define QOS_ELEMENT_ID                  221
-#define QOS_OUI_INFO_SUB_TYPE           0
-#define QOS_OUI_PARAM_SUB_TYPE          1
-#define QOS_VERSION_1                   1
-#define QOS_AIFSN_MIN_VALUE             2
-struct ieee80211_qos_information_element {
-	u8 elementID;
-	u8 length;
-	u8 qui[QOS_OUI_LEN];
-	u8 qui_type;
-	u8 qui_subtype;
-	u8 version;
-	u8 ac_info;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_ac_parameter {
-	u8 aci_aifsn;
-	u8 ecw_min_max;
-	__le16 tx_op_limit;
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameter_info {
-	struct ieee80211_qos_information_element info_element;
-	u8 reserved;
-	struct ieee80211_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_parameters {
-	__le16 cw_min[QOS_QUEUE_NUM];
-	__le16 cw_max[QOS_QUEUE_NUM];
-	u8 aifs[QOS_QUEUE_NUM];
-	u8 flag[QOS_QUEUE_NUM];
-	__le16 tx_op_limit[QOS_QUEUE_NUM];
-} __attribute__ ((packed));
-
-struct ieee80211_qos_data {
-	struct ieee80211_qos_parameters parameters;
-	int active;
-	int supported;
-	u8 param_count;
-	u8 old_param_count;
-};
-
-struct ieee80211_tim_parameters {
-	u8 tim_count;
-	u8 tim_period;
-} __attribute__ ((packed));
-
-struct ieee80211_wmm_ac_param {
-	u8 ac_aci_acm_aifsn;
-	u8 ac_ecwmin_ecwmax;
-	u16 ac_txop_limit;
-};
-
-struct ieee80211_wmm_ts_info {
-	u8 ac_dir_tid;
-	u8 ac_up_psb;
-	u8 reserved;
-} __attribute__ ((packed));
-
-struct ieee80211_wmm_tspec_elem {
-	struct ieee80211_wmm_ts_info ts_info;
-	u16 norm_msdu_size;
-	u16 max_msdu_size;
-	u32 min_serv_inter;
-	u32 max_serv_inter;
-	u32 inact_inter;
-	u32 suspen_inter;
-	u32 serv_start_time;
-	u32 min_data_rate;
-	u32 mean_data_rate;
-	u32 peak_data_rate;
-	u32 max_burst_size;
-	u32 delay_bound;
-	u32 min_phy_rate;
-	u16 surp_band_allow;
-	u16 medium_time;
-} __attribute__((packed));
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-static const char *eap_types[] = {
-	[EAP_PACKET]		= "EAP-Packet",
-	[EAPOL_START]		= "EAPOL-Start",
-	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
-	[EAPOL_KEY]		= "EAPOL-Key",
-	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
-};
-
-static inline const char *eap_get_type(int type)
-{
-	return ((u32)type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
-}
-static inline u8 Frame_QoSTID(u8 *buf)
-{
-	struct ieee80211_hdr_3addr *hdr;
-	u16 fc;
-	hdr = (struct ieee80211_hdr_3addr *)buf;
-	fc = le16_to_cpu(hdr->frame_ctl);
-	return (u8)((frameqos *)(buf + (((fc & IEEE80211_FCTL_TODS) && (fc & IEEE80211_FCTL_FROMDS)) ? 30 : 24)))->field.tid;
-}
-
-
-struct eapol {
-	u8 snap[6];
-	u16 ethertype;
-	u8 version;
-	u8 type;
-	u16 length;
-} __attribute__ ((packed));
-
-struct ieee80211_softmac_stats{
-	unsigned int rx_ass_ok;
-	unsigned int rx_ass_err;
-	unsigned int rx_probe_rq;
-	unsigned int tx_probe_rs;
-	unsigned int tx_beacons;
-	unsigned int rx_auth_rq;
-	unsigned int rx_auth_rs_ok;
-	unsigned int rx_auth_rs_err;
-	unsigned int tx_auth_rq;
-	unsigned int no_auth_rs;
-	unsigned int no_ass_rs;
-	unsigned int tx_ass_rq;
-	unsigned int rx_ass_rq;
-	unsigned int tx_probe_rq;
-	unsigned int reassoc;
-	unsigned int swtxstop;
-	unsigned int swtxawake;
-	unsigned char CurrentShowTxate;
-	unsigned char last_packet_rate;
-	unsigned int txretrycount;
-};
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-struct ieee80211_info_element_hdr {
-	u8 id;
-	u8 len;
-} __attribute__ ((packed));
-
-/*
- * These are the data types that can make up management packets
- *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
-	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __attribute__ ((packed));
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 2 /* 1Mbps */
-
-enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
-#define MAX_SP_Len  (WMM_all_frame << 4)
-#define IEEE80211_QOS_TID 0x0f
-#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-
-
-#ifdef WMM_Hang_8187
-#undef WMM_Hang_8187
-#endif
-
-#define WME_AC_BK   0x00
-#define WME_AC_BE   0x01
-#define WME_AC_VI   0x02
-#define WME_AC_VO   0x03
-#define WME_ACI_MASK 0x03
-#define WME_AIFSN_MASK 0x03
-#define WME_AC_PRAM_LEN 16
-
-#define MAX_RECEIVE_BUFFER_SIZE 9100
-
-/* UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP */
-#define UP2AC(up) (		   \
-	((up) < 1) ? WME_AC_BE : \
-	((up) < 3) ? WME_AC_BK : \
-	((up) < 4) ? WME_AC_BE : \
-	((up) < 6) ? WME_AC_VI : \
-	WME_AC_VO)
-/* AC Mapping to UP, using in Tx part for selecting the corresponding TX queue */
-#define AC2UP(_ac)	(       \
-	((_ac) == WME_AC_VO) ? 6 : \
-	((_ac) == WME_AC_VI) ? 5 : \
-	((_ac) == WME_AC_BK) ? 1 : \
-	0)
-
-#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
-#define ETHERNET_HEADER_SIZE    14      /* length of two Ethernet address plus ether type*/
-
-struct	ether_header {
-	u8 ether_dhost[ETHER_ADDR_LEN];
-	u8 ether_shost[ETHER_ADDR_LEN];
-	u16 ether_type;
-} __attribute__((packed));
-
-#ifndef ETHERTYPE_PAE
-#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
-#endif
-#ifndef ETHERTYPE_IP
-#define	ETHERTYPE_IP	0x0800		/* IP protocol */
-#endif
-
-typedef struct _bss_ht{
-
-	bool				support_ht;
-
-	/* HT related elements */
-	u8					ht_cap_buf[32];
-	u16					ht_cap_len;
-	u8					ht_info_buf[32];
-	u16					ht_info_len;
-
-	HT_SPEC_VER			ht_spec_ver;
-	/* HT_CAPABILITY_ELE			bdHTCapEle; */
-	/* HT_INFORMATION_ELE		bdHTInfoEle; */
-
-	bool				aggregation;
-	bool				long_slot_time;
-} bss_ht, *pbss_ht;
-
-typedef enum _erp_t{
-	ERP_NonERPpresent	= 0x01,
-	ERP_UseProtection	= 0x02,
-	ERP_BarkerPreambleMode = 0x04,
-} erp_t;
-
-
-struct ieee80211_network {
-	/* These entries are used to identify a unique network */
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	/* Ensure null-terminated for any debug msgs */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-	struct ieee80211_qos_data qos_data;
-	bool	bWithAironetIE;
-	bool	bCkipSupported;
-	bool	bCcxRmEnable;
-	u16 	CcxRmState[2];
-	/* CCXv4 S59, MBSSID. */
-	bool	bMBssidValid;
-	u8	MBssidMask;
-	u8	MBssid[6];
-	/* CCX 2 S38, WLAN Device Version Number element. */
-	bool	bWithCcxVerNum;
-	u8	BssCcxVerNumber;
-	/* These are network statistics */
-	struct ieee80211_rx_stats stats;
-	u16 capability;
-	u8  rates[MAX_RATES_LENGTH];
-	u8  rates_len;
-	u8  rates_ex[MAX_RATES_EX_LENGTH];
-	u8  rates_ex_len;
-	unsigned long last_scanned;
-	u8  mode;
-	u32 flags;
-	u32 last_associate;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 listen_interval;
-	u16 atim_window;
-	u8  erp_value;
-	u8  wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8  rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-
-	struct ieee80211_tim_parameters tim;
-	u8  dtim_period;
-	u8  dtim_data;
-	u32 last_dtim_sta_time[2];
-
-	/* appeded for QoS */
-	u8 wmm_info;
-	struct ieee80211_wmm_ac_param wmm_param[4];
-	u8 QoS_Enable;
-#ifdef THOMAS_TURBO
-	u8 Turbo_Enable;/* enable turbo mode, added by thomas */
-#endif
-#ifdef ENABLE_DOT11D
-	u16 CountryIeLen;
-	u8 CountryIeBuf[MAX_IE_LEN];
-#endif
-	/* HT Related */
-	BSS_HT	bssht;
-	/* Add to handle broadcom AP management frame CCK rate. */
-	bool broadcom_cap_exist;
-	bool ralink_cap_exist;
-	bool atheros_cap_exist;
-	bool cisco_cap_exist;
-	bool unknown_cap_exist;
-	bool	berp_info_valid;
-	bool buseprotection;
-	/* put at the end of the structure. */
-	struct list_head list;
-};
-
-enum ieee80211_state {
-
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-
-	/* the association procedure has successfully authentcated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-#define CFG_IEEE80211_RTS (1<<2)
-
-#define IEEE80211_24GHZ_MIN_CHANNEL 1
-#define IEEE80211_24GHZ_MAX_CHANNEL 14
-#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
-				  IEEE80211_24GHZ_MIN_CHANNEL + 1)
-
-#define IEEE80211_52GHZ_MIN_CHANNEL 34
-#define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
-				  IEEE80211_52GHZ_MIN_CHANNEL + 1)
-
-
-
-typedef struct tx_pending_t{
-	int frag;
-	struct ieee80211_txb *txb;
-} tx_pending_t;
-
-typedef struct _bandwidth_autoswitch {
-	long threshold_20Mhzto40Mhz;
-	long	threshold_40Mhzto20Mhz;
-	bool bforced_tx20Mhz;
-	bool bautoswitch_enable;
-} bandwidth_autoswitch, *pbandwidth_autoswitch;
-
-
-
-#define REORDER_WIN_SIZE	128
-#define REORDER_ENTRY_NUM	128
-typedef struct _RX_REORDER_ENTRY {
-	struct list_head	List;
-	u16			SeqNum;
-	struct ieee80211_rxb *prxb;
-} RX_REORDER_ENTRY, *PRX_REORDER_ENTRY;
-
-typedef enum _Fsync_State {
-	Default_Fsync,
-	HW_Fsync,
-	SW_Fsync
-} Fsync_State;
-
-/* Power save mode configured. */
-typedef	enum _RT_PS_MODE {
-	eActive,	/* Active/Continuous access. */
-	eMaxPs,		/* Max power save mode. */
-	eFastPs		/* Fast power save mode. */
-} RT_PS_MODE;
-
-typedef enum _IPS_CALLBACK_FUNCION {
-	IPS_CALLBACK_NONE = 0,
-	IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
-	IPS_CALLBACK_JOIN_REQUEST = 2,
-} IPS_CALLBACK_FUNCION;
-
-typedef enum _RT_JOIN_ACTION {
-	RT_JOIN_INFRA   = 1,
-	RT_JOIN_IBSS  = 2,
-	RT_START_IBSS = 3,
-	RT_NO_ACTION  = 4,
-} RT_JOIN_ACTION;
-
-typedef struct _IbssParms {
-	u16   atimWin;
-} IbssParms, *PIbssParms;
-#define MAX_NUM_RATES	264 /* Max num of support rates element: 8,  Max num of ext. support rate: 255. 061122, by rcnjko. */
-
-/* RF state. */
-typedef	enum _RT_RF_POWER_STATE {
-	eRfOn,
-	eRfSleep,
-	eRfOff
-} RT_RF_POWER_STATE;
-
-typedef struct _RT_POWER_SAVE_CONTROL {
-
-	/* Inactive Power Save(IPS) : Disable RF when disconnected */
-	bool				bInactivePs;
-	bool				bIPSModeBackup;
-	bool				bSwRfProcessing;
-	RT_RF_POWER_STATE	eInactivePowerState;
-	struct work_struct 	InactivePsWorkItem;
-	struct timer_list	InactivePsTimer;
-
-	/* Return point for join action */
-	IPS_CALLBACK_FUNCION	ReturnPoint;
-
-	/* Recored Parameters for rescheduled JoinRequest */
-	bool				bTmpBssDesc;
-	RT_JOIN_ACTION		tmpJoinAction;
-	struct ieee80211_network tmpBssDesc;
-
-	/* Recored Parameters for rescheduled MgntLinkRequest */
-	bool				bTmpScanOnly;
-	bool				bTmpActiveScan;
-	bool				bTmpFilterHiddenAP;
-	bool				bTmpUpdateParms;
-	u8					tmpSsidBuf[33];
-	OCTET_STRING			tmpSsid2Scan;
-	bool				bTmpSsid2Scan;
-	u8					tmpNetworkType;
-	u8					tmpChannelNumber;
-	u16					tmpBcnPeriod;
-	u8					tmpDtimPeriod;
-	u16					tmpmCap;
-	OCTET_STRING			tmpSuppRateSet;
-	u8					tmpSuppRateBuf[MAX_NUM_RATES];
-	bool				bTmpSuppRate;
-	IbssParms				tmpIbpm;
-	bool				bTmpIbpm;
-
-	/* Leisre Poswer Save : Disable RF if connected but traffic is not busy */
-	bool				bLeisurePs;
-
-} RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
-
-typedef u32 RT_RF_CHANGE_SOURCE;
-#define RF_CHANGE_BY_SW BIT31
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
-#define RF_CHANGE_BY_INIT	0	/* Do not change the RFOff reason. */
-
-#ifdef ENABLE_DOT11D
-typedef enum {
-	COUNTRY_CODE_FCC = 0,
-	COUNTRY_CODE_IC = 1,
-	COUNTRY_CODE_ETSI = 2,
-	COUNTRY_CODE_SPAIN = 3,
-	COUNTRY_CODE_FRANCE = 4,
-	COUNTRY_CODE_MKK = 5,
-	COUNTRY_CODE_MKK1 = 6,
-	COUNTRY_CODE_ISRAEL = 7,
-	COUNTRY_CODE_TELEC,
-	COUNTRY_CODE_MIC,
-	COUNTRY_CODE_GLOBAL_DOMAIN
-} country_code_type_t;
-#endif
-
-#define RT_MAX_LD_SLOT_NUM	10
-typedef struct _RT_LINK_DETECT_T {
-
-	u32				NumRecvBcnInPeriod;
-	u32				NumRecvDataInPeriod;
-
-	u32				RxBcnNum[RT_MAX_LD_SLOT_NUM];	/* number of Rx beacon / CheckForHang_period  to determine link status */
-	u32				RxDataNum[RT_MAX_LD_SLOT_NUM];	/* number of Rx data / CheckForHang_period  to determine link status */
-	u16				SlotNum;	/* number of CheckForHang period to determine link status */
-	u16				SlotIndex;
-
-	u32				NumTxOkInPeriod;
-	u32				NumRxOkInPeriod;
-	bool				bBusyTraffic;
-} RT_LINK_DETECT_T, *PRT_LINK_DETECT_T;
-
-
-struct ieee80211_device {
-	struct net_device *dev;
-	struct ieee80211_security sec;
-
-	/* hw security related */
-	u8 hwsec_active;  /* hw security active. */
-	bool is_silent_reset;
-	bool ieee_up;
-	bool bSupportRemoteWakeUp;
-	RT_PS_MODE	dot11PowerSaveMode; /* Power save mode configured. */
-	bool actscanning;
-	bool beinretry;
-	RT_RF_POWER_STATE		eRFPowerState;
-	RT_RF_CHANGE_SOURCE	RfOffReason;
-	bool is_set_key;
-	/* 11n spec related I wonder if These info structure need to be moved out of ieee80211_device */
-
-	/* 11n HT below */
-	PRT_HIGH_THROUGHPUT	pHTInfo;
-	spinlock_t bw_spinlock;
-
-	spinlock_t reorder_spinlock;
-	/* for HT operation rate set.  we use this one for HT data rate to
-	 * separate different descriptors
-	 * the way fill this is the same as in the IE
-	 */
-	u8	Regdot11HTOperationalRateSet[16];		/* use RATR format */
-	u8	dot11HTOperationalRateSet[16];		/* use RATR format */
-	u8	RegHTSuppRateSet[16];
-	u8				HTCurrentOperaRate;
-	u8				HTHighestOperaRate;
-	/* wb added for rate operation mode to firmware */
-	u8	bTxDisableRateFallBack;
-	u8 	bTxUseDriverAssingedRate;
-	atomic_t	atm_chnlop;
-	atomic_t	atm_swbw;
-
-	/* 802.11e and WMM Traffic Stream Info (TX) */
-	struct list_head		Tx_TS_Admit_List;
-	struct list_head		Tx_TS_Pending_List;
-	struct list_head		Tx_TS_Unused_List;
-	TX_TS_RECORD		TxTsRecord[TOTAL_TS_NUM];
-	/* 802.11e and WMM Traffic Stream Info (RX) */
-	struct list_head		Rx_TS_Admit_List;
-	struct list_head		Rx_TS_Pending_List;
-	struct list_head		Rx_TS_Unused_List;
-	RX_TS_RECORD		RxTsRecord[TOTAL_TS_NUM];
-	RX_REORDER_ENTRY	RxReorderEntry[128];
-	struct list_head		RxReorder_Unused_List;
-	/* Qos related. */
-/*	PSTA_QOS			pStaQos; */
-	u8				ForcedPriority;		/* Force per-packet priority 1~7. (default: 0, not to force it.) */
-
-
-	/* Bookkeeping structures */
-	struct net_device_stats stats;
-	struct ieee80211_stats ieee_stats;
-	struct ieee80211_softmac_stats softmac_stats;
-
-	/* Probe / Beacon management */
-	struct list_head network_free_list;
-	struct list_head network_list;
-	struct ieee80211_network *networks;
-	int scans;
-	int scan_age;
-
-	int iw_mode; /* operating mode (IW_MODE_*) */
-	struct iw_spy_data spy_data;
-
-	spinlock_t lock;
-	spinlock_t wpax_suitlist_lock;
-
-	int tx_headroom; /* Set to size of any additional room needed at front
-			  * of allocated Tx SKBs */
-	u32 config;
-
-	/* WEP and other encryption related settings at the device level */
-	int open_wep; /* Set to 1 to allow unencrypted frames */
-	int auth_mode;
-	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
-				 * WEP key changes */
-
-	/* If the host performs {en,de}cryption, then set to 1 */
-	int host_encrypt;
-	int host_encrypt_msdu;
-	int host_decrypt;
-	/* host performs multicast decryption */
-	int host_mc_decrypt;
-
-	/* host should strip IV and ICV from protected frames */
-	/* meaningful only when hardware decryption is being used */
-	int host_strip_iv_icv;
-
-	int host_open_frag;
-	int host_build_iv;
-	int ieee802_1x; /* is IEEE 802.1X used */
-
-	/* WPA data */
-	bool bHalfWirelessN24GMode;
-	int wpa_enabled;
-	int drop_unencrypted;
-	int tkip_countermeasures;
-	int privacy_invoked;
-	size_t wpa_ie_len;
-	u8 *wpa_ie;
-	u8 ap_mac_addr[6];
-	u16 pairwise_key_type;
-	u16 group_key_type;
-	struct list_head crypt_deinit_list;
-	struct ieee80211_crypt_data *crypt[WEP_KEYS];
-	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
-	struct timer_list crypt_deinit_timer;
-	int crypt_quiesced;
-
-	int bcrx_sta_key; /* use individual keys to override default keys even
-			   * with RX of broad/multicast frames */
-
-	/* Fragmentation structures */
-	/* each streaming contain a entry */
-	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
-	unsigned int frag_next_idx[17];
-	u16 fts; /* Fragmentation Threshold */
-#define DEFAULT_RTS_THRESHOLD 2346U
-#define MIN_RTS_THRESHOLD 1
-#define MAX_RTS_THRESHOLD 2346U
-	u16 rts; /* RTS threshold */
-
-	/* Association info */
-	u8 bssid[ETH_ALEN];
-
-	/* This stores infos for the current network.
-	 * Either the network we are associated in INFRASTRUCTURE
-	 * or the network that we are creating in MASTER mode.
-	 * ad-hoc is a mixture ;-).
-	 * Note that in infrastructure mode, even when not associated,
-	 * fields bssid and essid may be valid (if wpa_set and essid_set
-	 * are true) as thy carry the value set by the user via iwconfig
-	 */
-	struct ieee80211_network current_network;
-
-	enum ieee80211_state state;
-
-	int short_slot;
-	int reg_mode;
-	int mode;       /* A, B, G */
-	int modulation; /* CCK, OFDM */
-	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
-	int abg_true;   /* ABG flag              */
-
-	/* used for forcing the ibss workqueue to terminate
-	 * without wait for the syncro scan to terminate
-	 */
-	short sync_scan_hurryup;
-
-	int perfect_rssi;
-	int worst_rssi;
-
-	u16 prev_seq_ctl;       /* used to drop duplicate frames */
-
-	/* map of allowed channels. 0 is dummy */
-	/* FIXME: remeber to default to a basic channel plan depending of the PHY type */
-#ifdef ENABLE_DOT11D
-	void *pDot11dInfo;
-	bool bGlobalDomain;
-#else
-	int channel_map[MAX_CHANNEL_NUMBER+1];
-#endif
-	int rate;       /* current rate */
-	int basic_rate;
-	/* FIXME: pleace callback, see if redundant with softmac_features */
-	short active_scan;
-
-	/* this contains flags for selectively enable softmac support */
-	u16 softmac_features;
-
-	/* if the sequence control field is not filled by HW */
-	u16 seq_ctrl[5];
-
-	/* association procedure transaction sequence number */
-	u16 associate_seq;
-
-	/* AID for RTXed association responses */
-	u16 assoc_id;
-
-	/* power save mode related*/
-	short ps;
-	short sta_sleep;
-	int ps_timeout;
-	int ps_period;
-	struct tasklet_struct ps_task;
-	u32 ps_th;
-	u32 ps_tl;
-
-	short raw_tx;
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	short queue_stop;
-	short scanning;
-	short proto_started;
-
-	struct semaphore wx_sem;
-	struct semaphore scan_sem;
-
-	spinlock_t mgmt_tx_lock;
-	spinlock_t beacon_lock;
-
-	short beacon_txing;
-
-	short wap_set;
-	short ssid_set;
-
-	u8  wpax_type_set;
-	u32 wpax_type_notify;
-
-	/* QoS related flag */
-	char init_wmmparam_flag;
-	/* set on initialization */
-	u8  qos_support;
-
-	/* for discarding duplicated packets in IBSS */
-	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
-
-	/* for discarding duplicated packets in BSS */
-	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
-	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
-	unsigned long last_packet_time[17];
-
-	/* for PS mode */
-	unsigned long last_rx_ps_time;
-
-	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
-	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
-	int mgmt_queue_head;
-	int mgmt_queue_tail;
-/* added for rtl819x */
-#define IEEE80211_QUEUE_LIMIT 128
-	u8 AsocRetryCount;
-	unsigned int hw_header;
-	struct sk_buff_head skb_waitQ[MAX_QUEUE_SIZE];
-	struct sk_buff_head  skb_aggQ[MAX_QUEUE_SIZE];
-	struct sk_buff_head  skb_drv_aggQ[MAX_QUEUE_SIZE];
-	u32	sta_edca_param[4];
-	bool aggregation;
-	/* Enable/Disable Rx immediate BA capability. */
-	bool enable_rx_imm_BA;
-	bool bibsscoordinator;
-
-	/*+by amy for DM ,080515 */
-	/* Dynamic Tx power for near/far range enable/Disable  */
-	bool	bdynamic_txpower_enable;
-
-	bool bCTSToSelfEnable;
-	u8 	CTSToSelfTH;
-
-	u32 	fsync_time_interval;
-	u32	fsync_rate_bitmap;
-	u8	fsync_rssi_threshold;
-	bool	bfsync_enable;
-
-	u8	fsync_multiple_timeinterval;		/* FsyncMultipleTimeInterval * FsyncTimeInterval */
-	u32	fsync_firstdiff_ratethreshold;		/* low threshold */
-	u32	fsync_seconddiff_ratethreshold;	 /* decrease threshold */
-	Fsync_State			fsync_state;
-	bool		bis_any_nonbepkts;
-	/* 20Mhz 40Mhz AutoSwitch Threshold */
-	bandwidth_autoswitch bandwidth_auto_switch;
-	/* for txpower tracking */
-	bool FwRWRF;
-
-	/* added by amy for AP roaming */
-	RT_LINK_DETECT_T	LinkDetectInfo;
-	/* added by amy for ps */
-	RT_POWER_SAVE_CONTROL	PowerSaveControl;
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	struct  tx_pending_t tx_pending;
-
-	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
-	struct timer_list associate_timer;
-
-	/* used if IEEE_SOFTMAC_BEACONS is set */
-	struct timer_list beacon_timer;
-	struct work_struct associate_complete_wq;
-	struct work_struct associate_procedure_wq;
-	struct delayed_work softmac_scan_wq;
-	struct delayed_work associate_retry_wq;
-	 struct delayed_work start_ibss_wq;
-	struct work_struct wx_sync_scan_wq;
-	struct workqueue_struct *wq;
-	/* Qos related. Added by Annie, 2005-11-01. */
-	/* STA_QOS  StaQos; */
-
-
-	/* Callback functions */
-	void (*set_security)(struct net_device *dev,
-			     struct ieee80211_security *sec);
-
-	/* Used to TX data frame by using txb structs.
-	 * this is not used if in the softmac_features
-	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
-	 */
-	int (*hard_start_xmit)(struct ieee80211_txb *txb,
-			       struct net_device *dev);
-
-	int (*reset_port)(struct net_device *dev);
-	int (*is_queue_full) (struct net_device *dev, int pri);
-
-	int (*handle_management) (struct net_device *dev,
-				  struct ieee80211_network *network, u16 type);
-	int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
-
-	/* Softmac-generated frames (mamagement) are TXed via this
-	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
-	 * not set. As some cards may have different HW queues that
-	 * one might want to use for data and management frames
-	 * the option to have two callbacks might be useful.
-	 * This fucntion can't sleep.
-	 */
-	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev);
-
-	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
-	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
-	 * then also management frames are sent via this callback.
-	 * This function can't sleep.
-	 */
-	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev, int rate);
-
-	/* stops the HW queue for DATA frames. Useful to avoid
-	 * waste time to TX data frame when we are reassociating
-	 * This function can sleep.
-	 */
-	void (*data_hard_stop)(struct net_device *dev);
-
-	/* OK this is complementar to data_poll_hard_stop */
-	void (*data_hard_resume)(struct net_device *dev);
-
-	/* ask to the driver to retune the radio .
-	 * This function can sleep. the driver should ensure
-	 * the radio has been swithced before return.
-	 */
-	void (*set_chan)(struct net_device *dev, short ch);
-
-	/* These are not used if the ieee stack takes care of
-	 * scanning (IEEE_SOFTMAC_SCAN feature set).
-	 * In this case only the set_chan is used.
-	 *
-	 * The syncro version is similar to the start_scan but
-	 * does not return until all channels has been scanned.
-	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when swithcing to ad-hoc mode
-	 * or in behalf of iwlist scan when the card is associated
-	 * and root user ask for a scan.
-	 * the fucntion stop_scan should stop both the syncro and
-	 * background scanning and can sleep.
-	 * The fucntion start_scan should initiate the background
-	 * scanning and can't sleep.
-	 */
-	void (*scan_syncro)(struct net_device *dev);
-	void (*start_scan)(struct net_device *dev);
-	void (*stop_scan)(struct net_device *dev);
-
-	/* indicate the driver that the link state is changed
-	 * for example it may indicate the card is associated now.
-	 * Driver might be interested in this to apply RX filter
-	 * rules or simply light the LINK led
-	 */
-	void (*link_change)(struct net_device *dev);
-
-	/* these two function indicates to the HW when to start
-	 * and stop to send beacons. This is used when the
-	 * IEEE_SOFTMAC_BEACONS is not set. For now the
-	 * stop_send_bacons is NOT guaranteed to be called only
-	 * after start_send_beacons.
-	 */
-	void (*start_send_beacons) (struct net_device *dev, u16 tx_rate);
-	void (*stop_send_beacons) (struct net_device *dev);
-
-	/* power save mode related */
-	void (*sta_wake_up) (struct net_device *dev);
-	void (*ps_request_tx_ack) (struct net_device *dev);
-	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
-	short (*ps_is_queue_empty) (struct net_device *dev);
-	int (*handle_beacon) (struct net_device *dev, struct ieee80211_beacon *beacon, struct ieee80211_network *network);
-	int (*handle_assoc_response) (struct net_device *dev, struct ieee80211_assoc_response_frame *resp, struct ieee80211_network *network);
-
-
-	/* check whether Tx hw resouce available */
-	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
-	/* added by wb for HT related */
-	void (*SetBWModeHandler)(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-	bool (*GetNmodeSupportBySecCfg)(struct net_device *dev);
-	void (*SetWirelessMode)(struct net_device *dev, u8 wireless_mode);
-	bool (*GetHalfNmodeSupportByAPsHandler)(struct net_device *dev);
-	void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
-
-	/* This must be the last item so that it points to the data
-	 * allocated beyond this structure by alloc_ieee80211 */
-	u8 priv[0];
-};
-
-#define IEEE_A            (1<<0)
-#define IEEE_B            (1<<1)
-#define IEEE_G            (1<<2)
-#define IEEE_N_24G 		  (1<<4)
-#define	IEEE_N_5G		  (1<<5)
-#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
-
-/* Generate a 802.11 header */
-
-/* Uses the channel change callback directly
- * instead of [start/stop] scan callbacks
- */
-#define IEEE_SOFTMAC_SCAN (1<<2)
-
-/* Perform authentication and association handshake */
-#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
-
-/* Generate probe requests */
-#define IEEE_SOFTMAC_PROBERQ (1<<4)
-
-/* Generate respones to probe requests */
-#define IEEE_SOFTMAC_PROBERS (1<<5)
-
-/* The ieee802.11 stack will manages the netif queue
- * wake/stop for the driver, taking care of 802.11
- * fragmentation. See softmac.c for details. */
-#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
-
-/* Uses only the softmac_data_hard_start_xmit
- * even for TX management frames.
- */
-#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
-
-/* Generate beacons.  The stack will enqueue beacons
- * to the card
- */
-#define IEEE_SOFTMAC_BEACONS (1<<6)
-
-static inline void *ieee80211_priv(struct net_device *dev)
-{
-	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-}
-
-extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
-extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
-{
-	/*
-	 * It is possible for both access points and our device to support
-	 * combinations of modes, so as long as there is one valid combination
-	 * of ap/device supported modes, then return success
-	 *
-	 */
-	if ((mode & IEEE_A) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_G) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_B) &&
-	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	return 0;
-}
-
-extern inline int ieee80211_get_hdrlen(u16 fc)
-{
-	int hdrlen = IEEE80211_3ADDR_LEN;
-
-	switch (WLAN_FC_GET_TYPE(fc)) {
-	case IEEE80211_FTYPE_DATA:
-		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
-			hdrlen = IEEE80211_4ADDR_LEN; /* Addr4 */
-		if (IEEE80211_QOS_HAS_SEQ(fc))
-			hdrlen += 2; /* QOS ctrl*/
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (WLAN_FC_GET_STYPE(fc)) {
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = IEEE80211_1ADDR_LEN;
-			break;
-		default:
-			hdrlen = IEEE80211_2ADDR_LEN;
-			break;
-		}
-		break;
-	}
-
-	return hdrlen;
-}
-
-static inline u8 *ieee80211_get_payload(struct ieee80211_hdr *hdr)
-{
-	switch (ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl))) {
-	case IEEE80211_1ADDR_LEN:
-		return ((struct ieee80211_hdr_1addr *)hdr)->payload;
-	case IEEE80211_2ADDR_LEN:
-		return ((struct ieee80211_hdr_2addr *)hdr)->payload;
-	case IEEE80211_3ADDR_LEN:
-		return ((struct ieee80211_hdr_3addr *)hdr)->payload;
-	case IEEE80211_4ADDR_LEN:
-		return ((struct ieee80211_hdr_4addr *)hdr)->payload;
-	}
-	return NULL;
-}
-
-static inline int ieee80211_is_ofdm_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_OFDM_RATE_6MB:
-	case IEEE80211_OFDM_RATE_9MB:
-	case IEEE80211_OFDM_RATE_12MB:
-	case IEEE80211_OFDM_RATE_18MB:
-	case IEEE80211_OFDM_RATE_24MB:
-	case IEEE80211_OFDM_RATE_36MB:
-	case IEEE80211_OFDM_RATE_48MB:
-	case IEEE80211_OFDM_RATE_54MB:
-		return 1;
-	}
-	return 0;
-}
-
-static inline int ieee80211_is_cck_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_CCK_RATE_1MB:
-	case IEEE80211_CCK_RATE_2MB:
-	case IEEE80211_CCK_RATE_5MB:
-	case IEEE80211_CCK_RATE_11MB:
-		return 1;
-	}
-	return 0;
-}
-
-
-/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
-
-extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
-
-/* ieee80211_tx.c */
-
-extern int ieee80211_encrypt_fragment(
-	struct ieee80211_device *ieee,
-	struct sk_buff *frag,
-	int hdr_len);
-
-extern int ieee80211_xmit(struct sk_buff *skb,
-			  struct net_device *dev);
-extern void ieee80211_txb_free(struct ieee80211_txb *);
-
-
-/* ieee80211_rx.c */
-extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-			struct ieee80211_rx_stats *rx_stats);
-extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-			     struct ieee80211_hdr_4addr *header,
-			     struct ieee80211_rx_stats *stats);
-
-/* ieee80211_wx.c */
-extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-#if WIRELESS_EXT >= 18
-extern int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra);
-extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra);
-extern int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
-			       struct iw_request_info *info,
-			       struct iw_param *data, char *extra);
-extern int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra);
-#endif
-extern int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
-
-/* ieee80211_softmac.c */
-extern short ieee80211_is_54g(struct ieee80211_network net);
-extern short ieee80211_is_shortslot(struct ieee80211_network net);
-extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
-			struct ieee80211_rx_stats *rx_stats, u16 type,
-			u16 stype);
-extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee80211_network *net);
-
-void SendDisassociation(struct ieee80211_device *ieee, u8* asSta, u8 asRsn);
-extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *ieee);
-
-extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
-extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
-extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
-extern void ieee80211_disassociate(struct ieee80211_device *ieee);
-extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
-extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
-extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
-extern void ieee80211_wake_queue(struct ieee80211_device *ieee);
-extern void ieee80211_stop_queue(struct ieee80211_device *ieee);
-extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
-extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
-extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
-extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee, struct iw_point *p);
-extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
-extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
-
-extern void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee);
-
-/* ieee80211_crypt_ccmp&tkip&wep.c */
-extern void ieee80211_tkip_null(void);
-extern void ieee80211_wep_null(void);
-extern void ieee80211_ccmp_null(void);
-
-/* ieee80211_softmac_wx.c */
-
-extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *ext);
-
-extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
-			 struct iw_request_info *info,
-			 union iwreq_data *awrq,
-			 char *extra);
-
-extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
-				struct iw_request_info *a,
-				union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
-			      struct iw_request_info *a,
-			      union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b);
-
-extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-
-
-extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra);
-/* HT */
-#define MAX_RECEIVE_BUFFER_SIZE 9100
-extern void HTDebugHTCapability(u8 *CapIE, u8 *TitleString);
-extern void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString);
-
-void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET    Offset);
-extern void HTUpdateDefaultSetting(struct ieee80211_device *ieee);
-extern void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 isEncrypt);
-extern void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 isEncrypt);
-extern void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len);
-extern void HTOnAssocRsp(struct ieee80211_device *ieee);
-extern void HTInitializeHTInfo(struct ieee80211_device *ieee);
-extern void HTInitializeBssDesc(PBSS_HT pBssHT);
-extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork);
-extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device *ieee,   struct ieee80211_network *pNetwork);
-extern u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter);
-extern u8 MCS_FILTER_ALL[];
-extern u16 MCS_DATA_RATE[2][2][77] ;
-extern u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame);
-extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT  pHTInfo);
-extern bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee);
-extern u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee,  u8      nMcsRate);
-extern u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate);
-extern u16  TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate);
-/* function in BAPROC.c */
-extern int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb);
-extern int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb);
-extern int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb);
-extern void TsInitAddBA(struct ieee80211_device *ieee, PTX_TS_RECORD   pTS, u8 Policy, u8 bOverwritePending);
-extern void TsInitDelBA(struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SELECT TxRxSelect);
-extern void BaSetupTimeOut(unsigned long data);
-extern void TxBaInactTimeout(unsigned long data);
-extern void RxBaInactTimeout(unsigned long data);
-extern void ResetBaEntry(PBA_RECORD pBA);
-/* function in TS.c */
-extern bool GetTs(
-	struct ieee80211_device *ieee,
-	PTS_COMMON_INFO *ppTS,
-	u8				*Addr,
-	u8                              TID,
-	TR_SELECT                       TxRxSelect,  /* Rx:1, Tx:0 */
-	bool                            bAddNewTs
-	);
-extern void TSInitialize(struct ieee80211_device *ieee);
-extern  void TsStartAddBaProcess(struct ieee80211_device *ieee, PTX_TS_RECORD   pTxTS);
-extern void RemovePeerTS(struct ieee80211_device *ieee, u8 *Addr);
-extern void RemoveAllTS(struct ieee80211_device *ieee);
-void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee);
-
-extern const long ieee80211_wlan_frequencies[];
-
-extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
-{
-	ieee->scans++;
-}
-
-extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
-{
-	return ieee->scans;
-}
-
-static inline const char *escape_essid(const char *essid, u8 essid_len)
-{
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (ieee80211_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else {
-			*d++ = *s++;
-		}
-	}
-	*d = '\0';
-	return escaped;
-}
-
-/* For the function is more related to hardware setting, it's better to use the
- * ieee handler to refer to it.
- */
-extern short check_nic_enough_desc(struct net_device *dev, int queue_index);
-extern int ieee80211_data_xmit(struct sk_buff *skb, struct net_device *dev);
-extern int ieee80211_parse_info_param(struct ieee80211_device *ieee,
-		struct ieee80211_info_element *info_element,
-		u16 length,
-		struct ieee80211_network *network,
-		struct ieee80211_rx_stats *stats);
-
-void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_rxb **prxbIndicateArray, u8  index);
-#define RT_ASOC_RETRY_LIMIT	5
-#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index fb78ed2876e..d6f55c290db 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -85,7 +85,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
 	}
 	/* Add the protocol name */
 	iwe.cmd = SIOCGIWNAME;
-	for(i=0; i<(sizeof(ieee80211_modes)/sizeof(ieee80211_modes[0])); i++) {
+	for(i=0; i<ARRAY_SIZE(ieee80211_modes); i++) {
 		if(network->mode&(1<<i)) {
 			sprintf(pname,ieee80211_modes[i].mode_string,ieee80211_modes[i].mode_size);
 			pname +=ieee80211_modes[i].mode_size;
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 69a2721e850..6206f929a65 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -39,7 +39,7 @@
 #include <linux/random.h>
 #include <linux/version.h>
 #include <asm/io.h>
-#include "ieee80211.h"
+#include "ieee80211/ieee80211.h"
 
 #define RTL8192U
 #define RTL819xU_MODULE_NAME "rtl819xU"
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index f38472c2e75..1ff7850cc1e 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -410,14 +410,12 @@ u16 read_nic_word(struct net_device *dev, int indx)
 	struct usb_device *udev = priv->udev;
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 2, HZ / 2);
+				       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+				       (indx&0xff)|0xff00, (indx>>8)&0x0f,
+							&data, 2, HZ / 2);
 
 	if (status < 0)
-	{
 		printk("read_nic_word TimeOut! status:%d\n", status);
-	}
-
 
 	return data;
 }
@@ -431,13 +429,10 @@ u16 read_nic_word_E(struct net_device *dev, int indx)
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-			       indx|0xfe00, 0, &data, 2, HZ / 2);
+				       indx|0xfe00, 0, &data, 2, HZ / 2);
 
 	if (status < 0)
-	{
 		printk("read_nic_word TimeOut! status:%d\n", status);
-	}
-
 
 	return data;
 }
@@ -446,31 +441,29 @@ u32 read_nic_dword(struct net_device *dev, int indx)
 {
 	u32 data;
 	int status;
-//	int result;
+	/* int result; */
 
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
 	struct usb_device *udev = priv->udev;
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-			       (indx&0xff)|0xff00, (indx>>8)&0x0f, &data, 4, HZ / 2);
-//	if(0 != result) {
-//	  printk(KERN_WARNING "read size of data = %d\, date = %d\n", result, data);
-//	}
+				       RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
+					(indx&0xff)|0xff00, (indx>>8)&0x0f,
+							&data, 4, HZ / 2);
+	/* if(0 != result) {
+	 *	printk(KERN_WARNING "read size of data = %d\, date = %d\n",
+	 *							 result, data);
+	 * }
+	 */
 
 	if (status < 0)
-	{
 		printk("read_nic_dword TimeOut! status:%d\n", status);
-	}
-
-
 
 	return data;
 }
 
-
-//u8 read_phy_cck(struct net_device *dev, u8 adr);
-//u8 read_phy_ofdm(struct net_device *dev, u8 adr);
+/* u8 read_phy_cck(struct net_device *dev, u8 adr); */
+/* u8 read_phy_ofdm(struct net_device *dev, u8 adr); */
 /* this might still called in what was the PHY rtl8185/rtl8192 common code
  * plans are to possibilty turn it again in one common code...
  */
@@ -478,26 +471,22 @@ inline void force_pci_posting(struct net_device *dev)
 {
 }
 
-
 static struct net_device_stats *rtl8192_stats(struct net_device *dev);
 void rtl8192_commit(struct net_device *dev);
-//void rtl8192_restart(struct net_device *dev);
+/* void rtl8192_restart(struct net_device *dev); */
 void rtl8192_restart(struct work_struct *work);
-//void rtl8192_rq_tx_ack(struct work_struct *work);
-
+/* void rtl8192_rq_tx_ack(struct work_struct *work); */
 void watch_dog_timer_callback(unsigned long data);
 
 /****************************************************************************
-   -----------------------------PROCFS STUFF-------------------------
-*****************************************************************************/
-
-static struct proc_dir_entry *rtl8192_proc = NULL;
-
+ *   -----------------------------PROCFS STUFF-------------------------
+*****************************************************************************
+ */
 
+static struct proc_dir_entry *rtl8192_proc;
 
-static int proc_get_stats_ap(char *page, char **start,
-			  off_t offset, int count,
-			  int *eof, void *data)
+static int proc_get_stats_ap(char *page, char **start, off_t offset, int count,
+							int *eof, void *data)
 {
 	struct net_device *dev = data;
 	struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -508,18 +497,12 @@ static int proc_get_stats_ap(char *page, char **start,
 
 	list_for_each_entry(target, &ieee->network_list, list) {
 
-		len += snprintf(page + len, count - len,
-		"%s ", target->ssid);
-
-		if(target->wpa_ie_len>0 || target->rsn_ie_len>0){
-			len += snprintf(page + len, count - len,
-			"WPA\n");
-		}
-		else{
-			len += snprintf(page + len, count - len,
-			"non_WPA\n");
-		}
+		len += snprintf(page + len, count - len, "%s ", target->ssid);
 
+		if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
+			len += snprintf(page + len, count - len, "WPA\n");
+		else
+			len += snprintf(page + len, count - len, "non_WPA\n");
 	}
 
 	*eof = 1;
diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h
index b2f7a571b1c..f4cf2801136 100644
--- a/drivers/staging/rtl8192u/r8192U_wx.h
+++ b/drivers/staging/rtl8192u/r8192U_wx.h
@@ -15,7 +15,7 @@
 #ifndef R8180_WX_H
 #define R8180_WX_H
 //#include <linux/wireless.h>
-//#include "ieee80211.h"
+
 extern struct iw_handler_def r8192_wx_handlers_def;
 /* Enable  the rtl819x_core.c to share this function, david 2008.9.22 */
 extern struct iw_statistics *r8192_get_wireless_stats(struct net_device *dev);
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 3cc2d571f9b..b136ee48828 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -11,7 +11,7 @@
  *        NDIS_STATUS_FAILURE - the following initialization process should be terminated
  *        NDIS_STATUS_SUCCESS - if firmware initialization process success
 **************************************************************************************************/
-//#include "ieee80211.h"
+
 #include "r8192U.h"
 #include "r8192U_hw.h"
 #include "r819xU_firmware_img.h"
diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h
index 383543d97f9..7ef16da7c4e 100644
--- a/drivers/staging/sep/sep_driver_api.h
+++ b/drivers/staging/sep/sep_driver_api.h
@@ -65,7 +65,7 @@
 /* free dynamic data aalocated during table creation */
 #define SEP_IOCFREEDMATABLEDATA                _IO(SEP_IOC_MAGIC_NUMBER , 7)
 
-/* get the static pool area addersses (physical and virtual) */
+/* get the static pool area addresses (physical and virtual) */
 #define SEP_IOCGETSTATICPOOLADDR               _IO(SEP_IOC_MAGIC_NUMBER , 8)
 
 /* set flow id command */
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index eb3a619c6a9..beab400805a 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -168,17 +168,6 @@ struct slic_cmdqueue {
 	struct slic_spinlock lock;
 };
 
-#ifdef STATUS_SUCCESS
-#undef STATUS_SUCCESS
-#endif
-
-#define STATUS_SUCCESS              0
-#define STATUS_PENDING              0
-#define STATUS_FAILURE             -1
-#define STATUS_ERROR               -2
-#define STATUS_NOT_SUPPORTED       -3
-#define STATUS_BUFFER_TOO_SHORT    -4
-
 #define SLIC_MAX_CARDS              32
 #define SLIC_MAX_PORTS              4        /* Max # of ports per card   */
 
@@ -510,7 +499,6 @@ struct adapter {
     struct slic_ifevents  if_events;
     struct slic_stats        inicstats_prev;
     struct slicnet_stats     slic_stats;
-    struct net_device_stats stats;
 };
 
 
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index bebf0fd2af8..f8c4b127e83 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -97,66 +97,6 @@
 #include "slichw.h"
 #include "slic.h"
 
-static struct net_device_stats *slic_get_stats(struct net_device *dev);
-static int slic_entry_open(struct net_device *dev);
-static int slic_entry_halt(struct net_device *dev);
-static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev);
-static void slic_xmit_fail(struct adapter *adapter, struct sk_buff *skb,
-			   void *cmd, u32 skbtype, u32 status);
-static void slic_config_pci(struct pci_dev *pcidev);
-static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter);
-static int slic_mac_set_address(struct net_device *dev, void *ptr);
-static void slic_link_event_handler(struct adapter *adapter);
-static void slic_upr_request_complete(struct adapter *adapter, u32 isr);
-static int slic_rspqueue_init(struct adapter *adapter);
-static void slic_rspqueue_free(struct adapter *adapter);
-static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter);
-static int slic_cmdq_init(struct adapter *adapter);
-static void slic_cmdq_free(struct adapter *adapter);
-static void slic_cmdq_reset(struct adapter *adapter);
-static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page);
-static void slic_cmdq_getdone(struct adapter *adapter);
-static void slic_cmdq_putdone_irq(struct adapter *adapter,
-				  struct slic_hostcmd *cmd);
-static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter);
-static int slic_rcvqueue_init(struct adapter *adapter);
-static int slic_rcvqueue_fill(struct adapter *adapter);
-static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb);
-static void slic_rcvqueue_free(struct adapter *adapter);
-static void slic_adapter_set_hwaddr(struct adapter *adapter);
-static int slic_card_init(struct sliccard *card, struct adapter *adapter);
-static void slic_intagg_set(struct adapter *adapter, u32 value);
-static int slic_card_download(struct adapter *adapter);
-static u32 slic_card_locate(struct adapter *adapter);
-static int slic_if_init(struct adapter *adapter);
-static int slic_adapter_allocresources(struct adapter *adapter);
-static void slic_adapter_freeresources(struct adapter *adapter);
-static void slic_link_config(struct adapter *adapter, u32 linkspeed,
-			     u32 linkduplex);
-static void slic_unmap_mmio_space(struct adapter *adapter);
-static void slic_card_cleanup(struct sliccard *card);
-static void slic_soft_reset(struct adapter *adapter);
-static bool slic_mac_filter(struct adapter *adapter,
-			    struct ether_header *ether_frame);
-static void slic_mac_address_config(struct adapter *adapter);
-static void slic_mac_config(struct adapter *adapter);
-static void slic_mcast_set_mask(struct adapter *adapter);
-static void slic_config_set(struct adapter *adapter, bool linkchange);
-static void slic_config_clear(struct adapter *adapter);
-static void slic_config_get(struct adapter *adapter, u32 config,
-			    u32 configh);
-static void slic_timer_load_check(ulong context);
-static void slic_assert_fail(void);
-static ushort slic_eeprom_cksum(char *m, int len);
-static void slic_upr_start(struct adapter *adapter);
-static void slic_link_upr_complete(struct adapter *adapter, u32 Isr);
-static int  slic_upr_request(struct adapter *adapter, u32 upr_request,
-			     u32 upr_data, u32 upr_data_h, u32 upr_buffer,
-			     u32 upr_buffer_h);
-static void slic_mcast_set_list(struct net_device *dev);
-
-
 static uint slic_first_init = 1;
 static char *slic_banner = "Alacritech SLIC Technology(tm) Server "\
 		"and Storage Accelerator (Non-Accelerated)";
@@ -206,6 +146,17 @@ MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
 #undef ASSERT
 #endif
 
+static void slic_assert_fail(void)
+{
+	u32 cpuid;
+	u32 curr_pid;
+	cpuid = smp_processor_id();
+	curr_pid = current->pid;
+
+	printk(KERN_ERR "%s CPU # %d ---- PID # %d\n",
+	       __func__, cpuid, curr_pid);
+}
+
 #ifndef ASSERT
 #define ASSERT(a) do {							\
 	if (!(a)) {							\
@@ -241,13 +192,6 @@ MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
 			_adapter->handle_lock.flags);                   \
 }
 
-static void slic_debug_init(void);
-static void slic_debug_cleanup(void);
-static void slic_debug_adapter_create(struct adapter *adapter);
-static void slic_debug_adapter_destroy(struct adapter *adapter);
-static void slic_debug_card_create(struct sliccard *card);
-static void slic_debug_card_destroy(struct sliccard *card);
-
 static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
 {
 	writel(value, reg);
@@ -272,1016 +216,6 @@ static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
 				adapter->bit64reglock.flags);
 }
 
-static void slic_init_driver(void)
-{
-	if (slic_first_init) {
-		slic_first_init = 0;
-		spin_lock_init(&slic_global.driver_lock.lock);
-		slic_debug_init();
-	}
-}
-
-static void slic_init_adapter(struct net_device *netdev,
-			      struct pci_dev *pcidev,
-			      const struct pci_device_id *pci_tbl_entry,
-			      void __iomem *memaddr, int chip_idx)
-{
-	ushort index;
-	struct slic_handle *pslic_handle;
-	struct adapter *adapter = netdev_priv(netdev);
-
-/*	adapter->pcidev = pcidev;*/
-	adapter->vendid = pci_tbl_entry->vendor;
-	adapter->devid = pci_tbl_entry->device;
-	adapter->subsysid = pci_tbl_entry->subdevice;
-	adapter->busnumber = pcidev->bus->number;
-	adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
-	adapter->functionnumber = (pcidev->devfn & 0x7);
-	adapter->memorylength = pci_resource_len(pcidev, 0);
-	adapter->slic_regs = (__iomem struct slic_regs *)memaddr;
-	adapter->irq = pcidev->irq;
-/*	adapter->netdev = netdev;*/
-	adapter->next_netdevice = head_netdevice;
-	head_netdevice = netdev;
-	adapter->chipid = chip_idx;
-	adapter->port = 0;	/*adapter->functionnumber;*/
-	adapter->cardindex = adapter->port;
-	adapter->memorybase = memaddr;
-	spin_lock_init(&adapter->upr_lock.lock);
-	spin_lock_init(&adapter->bit64reglock.lock);
-	spin_lock_init(&adapter->adapter_lock.lock);
-	spin_lock_init(&adapter->reset_lock.lock);
-	spin_lock_init(&adapter->handle_lock.lock);
-
-	adapter->card_size = 1;
-	/*
-	  Initialize slic_handle array
-	*/
-	ASSERT(SLIC_CMDQ_MAXCMDS <= 0xFFFF);
-	/*
-	 Start with 1.  0 is an invalid host handle.
-	*/
-	for (index = 1, pslic_handle = &adapter->slic_handles[1];
-	     index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
-
-		pslic_handle->token.handle_index = index;
-		pslic_handle->type = SLIC_HANDLE_FREE;
-		pslic_handle->next = adapter->pfree_slic_handles;
-		adapter->pfree_slic_handles = pslic_handle;
-	}
-	adapter->pshmem = (struct slic_shmem *)
-					pci_alloc_consistent(adapter->pcidev,
-					sizeof(struct slic_shmem),
-					&adapter->
-					phys_shmem);
-	ASSERT(adapter->pshmem);
-
-	memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
-
-	return;
-}
-
-static const struct net_device_ops slic_netdev_ops = {
-	.ndo_open		= slic_entry_open,
-	.ndo_stop		= slic_entry_halt,
-	.ndo_start_xmit		= slic_xmit_start,
-	.ndo_do_ioctl		= slic_ioctl,
-	.ndo_set_mac_address	= slic_mac_set_address,
-	.ndo_get_stats		= slic_get_stats,
-	.ndo_set_multicast_list	= slic_mcast_set_list,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-static int __devinit slic_entry_probe(struct pci_dev *pcidev,
-			       const struct pci_device_id *pci_tbl_entry)
-{
-	static int cards_found;
-	static int did_version;
-	int err = -ENODEV;
-	struct net_device *netdev;
-	struct adapter *adapter;
-	void __iomem *memmapped_ioaddr = NULL;
-	u32 status = 0;
-	ulong mmio_start = 0;
-	ulong mmio_len = 0;
-	struct sliccard *card = NULL;
-	int pci_using_dac = 0;
-
-	slic_global.dynamic_intagg = dynamic_intagg;
-
-	err = pci_enable_device(pcidev);
-
-	if (err)
-		return err;
-
-	if (slic_debug > 0 && did_version++ == 0) {
-		printk(KERN_DEBUG "%s\n", slic_banner);
-		printk(KERN_DEBUG "%s\n", slic_proc_version);
-	}
-
-	if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
-		pci_using_dac = 1;
-		if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
-			dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for "
-					"consistent allocations\n");
-			goto err_out_disable_pci;
-		}
-	} else if (pci_set_dma_mask(pcidev, DMA_BIT_MASK(32))) {
-		pci_using_dac = 0;
-		pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
-	} else {
-		dev_err(&pcidev->dev, "no usable DMA configuration\n");
-		goto err_out_disable_pci;
-	}
-
-	err = pci_request_regions(pcidev, DRV_NAME);
-	if (err) {
-		dev_err(&pcidev->dev, "can't obtain PCI resources\n");
-		goto err_out_disable_pci;
-	}
-
-	pci_set_master(pcidev);
-
-	netdev = alloc_etherdev(sizeof(struct adapter));
-	if (!netdev) {
-		err = -ENOMEM;
-		goto err_out_exit_slic_probe;
-	}
-
-	SET_NETDEV_DEV(netdev, &pcidev->dev);
-
-	pci_set_drvdata(pcidev, netdev);
-	adapter = netdev_priv(netdev);
-	adapter->netdev = netdev;
-	adapter->pcidev = pcidev;
-	if (pci_using_dac)
-		netdev->features |= NETIF_F_HIGHDMA;
-
-	mmio_start = pci_resource_start(pcidev, 0);
-	mmio_len = pci_resource_len(pcidev, 0);
-
-
-/*	memmapped_ioaddr =  (u32)ioremap_nocache(mmio_start, mmio_len);*/
-	memmapped_ioaddr = ioremap(mmio_start, mmio_len);
-	if (!memmapped_ioaddr) {
-		dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
-			mmio_len, mmio_start);
-		goto err_out_free_netdev;
-	}
-
-	slic_config_pci(pcidev);
-
-	slic_init_driver();
-
-	slic_init_adapter(netdev,
-			  pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
-
-	status = slic_card_locate(adapter);
-	if (status) {
-		dev_err(&pcidev->dev, "cannot locate card\n");
-		goto err_out_free_mmio_region;
-	}
-
-	card = adapter->card;
-
-	if (!adapter->allocated) {
-		card->adapters_allocated++;
-		adapter->allocated = 1;
-	}
-
-	status = slic_card_init(card, adapter);
-
-	if (status != STATUS_SUCCESS) {
-		card->state = CARD_FAIL;
-		adapter->state = ADAPT_FAIL;
-		adapter->linkstate = LINK_DOWN;
-		dev_err(&pcidev->dev, "FAILED status[%x]\n", status);
-	} else {
-		slic_adapter_set_hwaddr(adapter);
-	}
-
-	netdev->base_addr = (unsigned long)adapter->memorybase;
-	netdev->irq = adapter->irq;
-	netdev->netdev_ops = &slic_netdev_ops;
-
-	slic_debug_adapter_create(adapter);
-
-	strcpy(netdev->name, "eth%d");
-	err = register_netdev(netdev);
-	if (err) {
-		dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
-		goto err_out_unmap;
-	}
-
-	cards_found++;
-
-	return status;
-
-err_out_unmap:
-	iounmap(memmapped_ioaddr);
-err_out_free_mmio_region:
-	release_mem_region(mmio_start, mmio_len);
-err_out_free_netdev:
-	free_netdev(netdev);
-err_out_exit_slic_probe:
-	pci_release_regions(pcidev);
-err_out_disable_pci:
-	pci_disable_device(pcidev);
-	return err;
-}
-
-static int slic_entry_open(struct net_device *dev)
-{
-	struct adapter *adapter = netdev_priv(dev);
-	struct sliccard *card = adapter->card;
-	u32 locked = 0;
-	int status;
-
-	ASSERT(adapter);
-	ASSERT(card);
-
-	netif_stop_queue(adapter->netdev);
-
-	spin_lock_irqsave(&slic_global.driver_lock.lock,
-				slic_global.driver_lock.flags);
-	locked = 1;
-	if (!adapter->activated) {
-		card->adapters_activated++;
-		slic_global.num_slic_ports_active++;
-		adapter->activated = 1;
-	}
-	status = slic_if_init(adapter);
-
-	if (status != STATUS_SUCCESS) {
-		if (adapter->activated) {
-			card->adapters_activated--;
-			slic_global.num_slic_ports_active--;
-			adapter->activated = 0;
-		}
-		if (locked) {
-			spin_unlock_irqrestore(&slic_global.driver_lock.lock,
-						slic_global.driver_lock.flags);
-			locked = 0;
-		}
-		return status;
-	}
-	if (!card->master)
-		card->master = adapter;
-
-	if (locked) {
-		spin_unlock_irqrestore(&slic_global.driver_lock.lock,
-					slic_global.driver_lock.flags);
-		locked = 0;
-	}
-
-	return STATUS_SUCCESS;
-}
-
-static void __devexit slic_entry_remove(struct pci_dev *pcidev)
-{
-	struct net_device *dev = pci_get_drvdata(pcidev);
-	u32 mmio_start = 0;
-	uint mmio_len = 0;
-	struct adapter *adapter = netdev_priv(dev);
-	struct sliccard *card;
-	struct mcast_address *mcaddr, *mlist;
-
-	ASSERT(adapter);
-	slic_adapter_freeresources(adapter);
-	slic_unmap_mmio_space(adapter);
-	unregister_netdev(dev);
-
-	mmio_start = pci_resource_start(pcidev, 0);
-	mmio_len = pci_resource_len(pcidev, 0);
-
-	release_mem_region(mmio_start, mmio_len);
-
-	iounmap((void __iomem *)dev->base_addr);
-	/* free multicast addresses */
-	mlist = adapter->mcastaddrs;
-	while (mlist) {
-		mcaddr = mlist;
-		mlist = mlist->next;
-		kfree(mcaddr);
-	}
-	ASSERT(adapter->card);
-	card = adapter->card;
-	ASSERT(card->adapters_allocated);
-	card->adapters_allocated--;
-	adapter->allocated = 0;
-	if (!card->adapters_allocated) {
-		struct sliccard *curr_card = slic_global.slic_card;
-		if (curr_card == card) {
-			slic_global.slic_card = card->next;
-		} else {
-			while (curr_card->next != card)
-				curr_card = curr_card->next;
-			ASSERT(curr_card);
-			curr_card->next = card->next;
-		}
-		ASSERT(slic_global.num_slic_cards);
-		slic_global.num_slic_cards--;
-		slic_card_cleanup(card);
-	}
-	kfree(dev);
-	pci_release_regions(pcidev);
-}
-
-static int slic_entry_halt(struct net_device *dev)
-{
-	struct adapter *adapter = netdev_priv(dev);
-	struct sliccard *card = adapter->card;
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-
-	spin_lock_irqsave(&slic_global.driver_lock.lock,
-				slic_global.driver_lock.flags);
-	ASSERT(card);
-	netif_stop_queue(adapter->netdev);
-	adapter->state = ADAPT_DOWN;
-	adapter->linkstate = LINK_DOWN;
-	adapter->upr_list = NULL;
-	adapter->upr_busy = 0;
-	adapter->devflags_prev = 0;
-	ASSERT(card->adapter[adapter->cardindex] == adapter);
-	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
-	adapter->all_reg_writes++;
-	adapter->icr_reg_writes++;
-	slic_config_clear(adapter);
-	if (adapter->activated) {
-		card->adapters_activated--;
-		slic_global.num_slic_ports_active--;
-		adapter->activated = 0;
-	}
-#ifdef AUTOMATIC_RESET
-	slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
-#endif
-	/*
-	 *  Reset the adapter's cmd queues
-	 */
-	slic_cmdq_reset(adapter);
-
-#ifdef AUTOMATIC_RESET
-	if (!card->adapters_activated)
-		slic_card_init(card, adapter);
-#endif
-
-	spin_unlock_irqrestore(&slic_global.driver_lock.lock,
-				slic_global.driver_lock.flags);
-	return STATUS_SUCCESS;
-}
-
-static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct adapter *adapter = netdev_priv(dev);
-	struct ethtool_cmd edata;
-	struct ethtool_cmd ecmd;
-	u32 data[7];
-	u32 intagg;
-
-	ASSERT(rq);
-	switch (cmd) {
-	case SIOCSLICSETINTAGG:
-		if (copy_from_user(data, rq->ifr_data, 28))
-			return -EFAULT;
-		intagg = data[0];
-		dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
-			__func__, intagg);
-		slic_intagg_set(adapter, intagg);
-		return 0;
-
-#ifdef SLIC_TRACE_DUMP_ENABLED
-	case SIOCSLICTRACEDUMP:
-		{
-			u32 value;
-			DBG_IOCTL("slic_ioctl  SIOCSLIC_TRACE_DUMP\n");
-
-			if (copy_from_user(data, rq->ifr_data, 28)) {
-				PRINT_ERROR
-				    ("slic: copy_from_user FAILED getting initial simba param\n");
-				return -EFAULT;
-			}
-
-			value = data[0];
-			if (tracemon_request == SLIC_DUMP_DONE) {
-				PRINT_ERROR
-				    ("ATK Diagnostic Trace Dump Requested\n");
-				tracemon_request = SLIC_DUMP_REQUESTED;
-				tracemon_request_type = value;
-				tracemon_timestamp = jiffies;
-			} else if ((tracemon_request == SLIC_DUMP_REQUESTED) ||
-				   (tracemon_request ==
-				    SLIC_DUMP_IN_PROGRESS)) {
-				PRINT_ERROR
-				    ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
-			} else {
-				PRINT_ERROR
-				    ("ATK Diagnostic Trace Dump Requested\n");
-				tracemon_request = SLIC_DUMP_REQUESTED;
-				tracemon_request_type = value;
-				tracemon_timestamp = jiffies;
-			}
-			return 0;
-		}
-#endif
-	case SIOCETHTOOL:
-		ASSERT(adapter);
-		if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
-			return -EFAULT;
-
-		if (ecmd.cmd == ETHTOOL_GSET) {
-			edata.supported = (SUPPORTED_10baseT_Half |
-					   SUPPORTED_10baseT_Full |
-					   SUPPORTED_100baseT_Half |
-					   SUPPORTED_100baseT_Full |
-					   SUPPORTED_Autoneg | SUPPORTED_MII);
-			edata.port = PORT_MII;
-			edata.transceiver = XCVR_INTERNAL;
-			edata.phy_address = 0;
-			if (adapter->linkspeed == LINK_100MB)
-				edata.speed = SPEED_100;
-			else if (adapter->linkspeed == LINK_10MB)
-				edata.speed = SPEED_10;
-			else
-				edata.speed = 0;
-
-			if (adapter->linkduplex == LINK_FULLD)
-				edata.duplex = DUPLEX_FULL;
-			else
-				edata.duplex = DUPLEX_HALF;
-
-			edata.autoneg = AUTONEG_ENABLE;
-			edata.maxtxpkt = 1;
-			edata.maxrxpkt = 1;
-			if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
-				return -EFAULT;
-
-		} else if (ecmd.cmd == ETHTOOL_SSET) {
-			if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-
-			if (adapter->linkspeed == LINK_100MB)
-				edata.speed = SPEED_100;
-			else if (adapter->linkspeed == LINK_10MB)
-				edata.speed = SPEED_10;
-			else
-				edata.speed = 0;
-
-			if (adapter->linkduplex == LINK_FULLD)
-				edata.duplex = DUPLEX_FULL;
-			else
-				edata.duplex = DUPLEX_HALF;
-
-			edata.autoneg = AUTONEG_ENABLE;
-			edata.maxtxpkt = 1;
-			edata.maxrxpkt = 1;
-			if ((ecmd.speed != edata.speed) ||
-			    (ecmd.duplex != edata.duplex)) {
-				u32 speed;
-				u32 duplex;
-
-				if (ecmd.speed == SPEED_10)
-					speed = 0;
-				else
-					speed = PCR_SPEED_100;
-				if (ecmd.duplex == DUPLEX_FULL)
-					duplex = PCR_DUPLEX_FULL;
-				else
-					duplex = 0;
-				slic_link_config(adapter, speed, duplex);
-				slic_link_event_handler(adapter);
-			}
-		}
-		return 0;
-	default:
-		return -EOPNOTSUPP;
-	}
-}
-
-#define  XMIT_FAIL_LINK_STATE               1
-#define  XMIT_FAIL_ZERO_LENGTH              2
-#define  XMIT_FAIL_HOSTCMD_FAIL             3
-
-static void slic_xmit_build_request(struct adapter *adapter,
-			     struct slic_hostcmd *hcmd, struct sk_buff *skb)
-{
-	struct slic_host64_cmd *ihcmd;
-	ulong phys_addr;
-
-	ihcmd = &hcmd->cmd64;
-
-	ihcmd->flags = (adapter->port << IHFLG_IFSHFT);
-	ihcmd->command = IHCMD_XMT_REQ;
-	ihcmd->u.slic_buffers.totlen = skb->len;
-	phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
-			PCI_DMA_TODEVICE);
-	ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
-	ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
-	ihcmd->u.slic_buffers.bufs[0].length = skb->len;
-#if defined(CONFIG_X86_64)
-	hcmd->cmdsize = (u32) ((((u64)&ihcmd->u.slic_buffers.bufs[1] -
-				     (u64) hcmd) + 31) >> 5);
-#elif defined(CONFIG_X86)
-	hcmd->cmdsize = ((((u32) &ihcmd->u.slic_buffers.bufs[1] -
-			   (u32) hcmd) + 31) >> 5);
-#else
-	Stop Compilation;
-#endif
-}
-
-#define NORMAL_ETHFRAME     0
-
-static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
-{
-	struct sliccard *card;
-	struct adapter *adapter = netdev_priv(dev);
-	struct slic_hostcmd *hcmd = NULL;
-	u32 status = 0;
-	u32 skbtype = NORMAL_ETHFRAME;
-	void *offloadcmd = NULL;
-
-	card = adapter->card;
-	ASSERT(card);
-	if ((adapter->linkstate != LINK_UP) ||
-	    (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
-		status = XMIT_FAIL_LINK_STATE;
-		goto xmit_fail;
-
-	} else if (skb->len == 0) {
-		status = XMIT_FAIL_ZERO_LENGTH;
-		goto xmit_fail;
-	}
-
-	if (skbtype == NORMAL_ETHFRAME) {
-		hcmd = slic_cmdq_getfree(adapter);
-		if (!hcmd) {
-			adapter->xmitq_full = 1;
-			status = XMIT_FAIL_HOSTCMD_FAIL;
-			goto xmit_fail;
-		}
-		ASSERT(hcmd->pslic_handle);
-		ASSERT(hcmd->cmd64.hosthandle ==
-		       hcmd->pslic_handle->token.handle_token);
-		hcmd->skb = skb;
-		hcmd->busy = 1;
-		hcmd->type = SLIC_CMD_DUMB;
-		if (skbtype == NORMAL_ETHFRAME)
-			slic_xmit_build_request(adapter, hcmd, skb);
-	}
-	adapter->stats.tx_packets++;
-	adapter->stats.tx_bytes += skb->len;
-
-#ifdef DEBUG_DUMP
-	if (adapter->kill_card) {
-		struct slic_host64_cmd ihcmd;
-
-		ihcmd = &hcmd->cmd64;
-
-		ihcmd->flags |= 0x40;
-		adapter->kill_card = 0;	/* only do this once */
-	}
-#endif
-	if (hcmd->paddrh == 0) {
-		slic_reg32_write(&adapter->slic_regs->slic_cbar,
-				 (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
-	} else {
-		slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
-				 (hcmd->paddrl | hcmd->cmdsize),
-				 &adapter->slic_regs->slic_addr_upper,
-				 hcmd->paddrh, DONT_FLUSH);
-	}
-xmit_done:
-	return NETDEV_TX_OK;
-xmit_fail:
-	slic_xmit_fail(adapter, skb, offloadcmd, skbtype, status);
-	goto xmit_done;
-}
-
-static void slic_xmit_fail(struct adapter *adapter,
-		    struct sk_buff *skb,
-		    void *cmd, u32 skbtype, u32 status)
-{
-	if (adapter->xmitq_full)
-		netif_stop_queue(adapter->netdev);
-	if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
-		switch (status) {
-		case XMIT_FAIL_LINK_STATE:
-			dev_err(&adapter->netdev->dev,
-				"reject xmit skb[%p: %x] linkstate[%s] "
-				"adapter[%s:%d] card[%s:%d]\n",
-				skb, skb->pkt_type,
-				SLIC_LINKSTATE(adapter->linkstate),
-				SLIC_ADAPTER_STATE(adapter->state),
-				adapter->state,
-				SLIC_CARD_STATE(adapter->card->state),
-				adapter->card->state);
-			break;
-		case XMIT_FAIL_ZERO_LENGTH:
-			dev_err(&adapter->netdev->dev,
-				"xmit_start skb->len == 0 skb[%p] type[%x]\n",
-				skb, skb->pkt_type);
-			break;
-		case XMIT_FAIL_HOSTCMD_FAIL:
-			dev_err(&adapter->netdev->dev,
-				"xmit_start skb[%p] type[%x] No host commands "
-				"available\n", skb, skb->pkt_type);
-			break;
-		default:
-			ASSERT(0);
-		}
-	}
-	dev_kfree_skb(skb);
-	adapter->stats.tx_dropped++;
-}
-
-static void slic_rcv_handle_error(struct adapter *adapter,
-					struct slic_rcvbuf *rcvbuf)
-{
-	struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
-
-	if (adapter->devid != SLIC_1GB_DEVICE_ID) {
-		if (hdr->frame_status14 & VRHSTAT_802OE)
-			adapter->if_events.oflow802++;
-		if (hdr->frame_status14 & VRHSTAT_TPOFLO)
-			adapter->if_events.Tprtoflow++;
-		if (hdr->frame_status_b14 & VRHSTATB_802UE)
-			adapter->if_events.uflow802++;
-		if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
-			adapter->if_events.rcvearly++;
-			adapter->stats.rx_fifo_errors++;
-		}
-		if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
-			adapter->if_events.Bufov++;
-			adapter->stats.rx_over_errors++;
-		}
-		if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
-			adapter->if_events.Carre++;
-			adapter->stats.tx_carrier_errors++;
-		}
-		if (hdr->frame_status_b14 & VRHSTATB_LONGE)
-			adapter->if_events.Longe++;
-		if (hdr->frame_status_b14 & VRHSTATB_PREA)
-			adapter->if_events.Invp++;
-		if (hdr->frame_status_b14 & VRHSTATB_CRC) {
-			adapter->if_events.Crc++;
-			adapter->stats.rx_crc_errors++;
-		}
-		if (hdr->frame_status_b14 & VRHSTATB_DRBL)
-			adapter->if_events.Drbl++;
-		if (hdr->frame_status_b14 & VRHSTATB_CODE)
-			adapter->if_events.Code++;
-		if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
-			adapter->if_events.TpCsum++;
-		if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
-			adapter->if_events.TpHlen++;
-		if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
-			adapter->if_events.IpCsum++;
-		if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
-			adapter->if_events.IpLen++;
-		if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
-			adapter->if_events.IpHlen++;
-	} else {
-		if (hdr->frame_statusGB & VGBSTAT_XPERR) {
-			u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
-
-			if (xerr == VGBSTAT_XCSERR)
-				adapter->if_events.TpCsum++;
-			if (xerr == VGBSTAT_XUFLOW)
-				adapter->if_events.Tprtoflow++;
-			if (xerr == VGBSTAT_XHLEN)
-				adapter->if_events.TpHlen++;
-		}
-		if (hdr->frame_statusGB & VGBSTAT_NETERR) {
-			u32 nerr =
-			    (hdr->
-			     frame_statusGB >> VGBSTAT_NERRSHFT) &
-			    VGBSTAT_NERRMSK;
-			if (nerr == VGBSTAT_NCSERR)
-				adapter->if_events.IpCsum++;
-			if (nerr == VGBSTAT_NUFLOW)
-				adapter->if_events.IpLen++;
-			if (nerr == VGBSTAT_NHLEN)
-				adapter->if_events.IpHlen++;
-		}
-		if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
-			u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
-
-			if (lerr == VGBSTAT_LDEARLY)
-				adapter->if_events.rcvearly++;
-			if (lerr == VGBSTAT_LBOFLO)
-				adapter->if_events.Bufov++;
-			if (lerr == VGBSTAT_LCODERR)
-				adapter->if_events.Code++;
-			if (lerr == VGBSTAT_LDBLNBL)
-				adapter->if_events.Drbl++;
-			if (lerr == VGBSTAT_LCRCERR)
-				adapter->if_events.Crc++;
-			if (lerr == VGBSTAT_LOFLO)
-				adapter->if_events.oflow802++;
-			if (lerr == VGBSTAT_LUFLO)
-				adapter->if_events.uflow802++;
-		}
-	}
-	return;
-}
-
-#define TCP_OFFLOAD_FRAME_PUSHFLAG  0x10000000
-#define M_FAST_PATH                 0x0040
-
-static void slic_rcv_handler(struct adapter *adapter)
-{
-	struct sk_buff *skb;
-	struct slic_rcvbuf *rcvbuf;
-	u32 frames = 0;
-
-	while ((skb = slic_rcvqueue_getnext(adapter))) {
-		u32 rx_bytes;
-
-		ASSERT(skb->head);
-		rcvbuf = (struct slic_rcvbuf *)skb->head;
-		adapter->card->events++;
-		if (rcvbuf->status & IRHDDR_ERR) {
-			adapter->rx_errors++;
-			slic_rcv_handle_error(adapter, rcvbuf);
-			slic_rcvqueue_reinsert(adapter, skb);
-			continue;
-		}
-
-		if (!slic_mac_filter(adapter, (struct ether_header *)
-					rcvbuf->data)) {
-			slic_rcvqueue_reinsert(adapter, skb);
-			continue;
-		}
-		skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
-		rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
-		skb_put(skb, rx_bytes);
-		adapter->stats.rx_packets++;
-		adapter->stats.rx_bytes += rx_bytes;
-#if SLIC_OFFLOAD_IP_CHECKSUM
-		skb->ip_summed = CHECKSUM_UNNECESSARY;
-#endif
-
-		skb->dev = adapter->netdev;
-		skb->protocol = eth_type_trans(skb, skb->dev);
-		netif_rx(skb);
-
-		++frames;
-#if SLIC_INTERRUPT_PROCESS_LIMIT
-		if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
-			adapter->rcv_interrupt_yields++;
-			break;
-		}
-#endif
-	}
-	adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
-}
-
-static void slic_xmit_complete(struct adapter *adapter)
-{
-	struct slic_hostcmd *hcmd;
-	struct slic_rspbuf *rspbuf;
-	u32 frames = 0;
-	struct slic_handle_word slic_handle_word;
-
-	do {
-		rspbuf = slic_rspqueue_getnext(adapter);
-		if (!rspbuf)
-			break;
-		adapter->xmit_completes++;
-		adapter->card->events++;
-		/*
-		 Get the complete host command buffer
-		*/
-		slic_handle_word.handle_token = rspbuf->hosthandle;
-		ASSERT(slic_handle_word.handle_index);
-		ASSERT(slic_handle_word.handle_index <= SLIC_CMDQ_MAXCMDS);
-		hcmd =
-		    (struct slic_hostcmd *)
-			adapter->slic_handles[slic_handle_word.handle_index].
-									address;
-/*      hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
-		ASSERT(hcmd);
-		ASSERT(hcmd->pslic_handle ==
-		       &adapter->slic_handles[slic_handle_word.handle_index]);
-		if (hcmd->type == SLIC_CMD_DUMB) {
-			if (hcmd->skb)
-				dev_kfree_skb_irq(hcmd->skb);
-			slic_cmdq_putdone_irq(adapter, hcmd);
-		}
-		rspbuf->status = 0;
-		rspbuf->hosthandle = 0;
-		frames++;
-	} while (1);
-	adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
-}
-
-static irqreturn_t slic_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = (struct net_device *)dev_id;
-	struct adapter *adapter = netdev_priv(dev);
-	u32 isr;
-
-	if ((adapter->pshmem) && (adapter->pshmem->isr)) {
-		slic_reg32_write(&adapter->slic_regs->slic_icr,
-				 ICR_INT_MASK, FLUSH);
-		isr = adapter->isrcopy = adapter->pshmem->isr;
-		adapter->pshmem->isr = 0;
-		adapter->num_isrs++;
-		switch (adapter->card->state) {
-		case CARD_UP:
-			if (isr & ~ISR_IO) {
-				if (isr & ISR_ERR) {
-					adapter->error_interrupts++;
-					if (isr & ISR_RMISS) {
-						int count;
-						int pre_count;
-						int errors;
-
-						struct slic_rcvqueue *rcvq =
-						    &adapter->rcvqueue;
-
-						adapter->
-						    error_rmiss_interrupts++;
-						if (!rcvq->errors)
-							rcv_count = rcvq->count;
-						pre_count = rcvq->count;
-						errors = rcvq->errors;
-
-						while (rcvq->count <
-						       SLIC_RCVQ_FILLTHRESH) {
-							count =
-							    slic_rcvqueue_fill
-							    (adapter);
-							if (!count)
-								break;
-						}
-					} else if (isr & ISR_XDROP) {
-						dev_err(&dev->dev,
-							"isr & ISR_ERR [%x] "
-							"ISR_XDROP \n", isr);
-					} else {
-						dev_err(&dev->dev,
-							"isr & ISR_ERR [%x]\n",
-							isr);
-					}
-				}
-
-				if (isr & ISR_LEVENT) {
-					adapter->linkevent_interrupts++;
-					slic_link_event_handler(adapter);
-				}
-
-				if ((isr & ISR_UPC) ||
-				    (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
-					adapter->upr_interrupts++;
-					slic_upr_request_complete(adapter, isr);
-				}
-			}
-
-			if (isr & ISR_RCV) {
-				adapter->rcv_interrupts++;
-				slic_rcv_handler(adapter);
-			}
-
-			if (isr & ISR_CMD) {
-				adapter->xmit_interrupts++;
-				slic_xmit_complete(adapter);
-			}
-			break;
-
-		case CARD_DOWN:
-			if ((isr & ISR_UPC) ||
-			    (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
-				adapter->upr_interrupts++;
-				slic_upr_request_complete(adapter, isr);
-			}
-			break;
-
-		default:
-			break;
-		}
-
-		adapter->isrcopy = 0;
-		adapter->all_reg_writes += 2;
-		adapter->isr_reg_writes++;
-		slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
-	} else {
-		adapter->false_interrupts++;
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * slic_link_event_handler -
- *
- * Initiate a link configuration sequence.  The link configuration begins
- * by issuing a READ_LINK_STATUS command to the Utility Processor on the
- * SLIC.  Since the command finishes asynchronously, the slic_upr_comlete
- * routine will follow it up witha UP configuration write command, which
- * will also complete asynchronously.
- *
- */
-static void slic_link_event_handler(struct adapter *adapter)
-{
-	int status;
-	struct slic_shmem *pshmem;
-
-	if (adapter->state != ADAPT_UP) {
-		/* Adapter is not operational.  Ignore.  */
-		return;
-	}
-
-	pshmem = (struct slic_shmem *)adapter->phys_shmem;
-
-#if defined(CONFIG_X86_64)
-	status = slic_upr_request(adapter,
-				  SLIC_UPR_RLSR,
-				  SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
-				  SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
-				  0, 0);
-#elif defined(CONFIG_X86)
-	status = slic_upr_request(adapter, SLIC_UPR_RLSR,
-		(u32) &pshmem->linkstatus,	/* no 4GB wrap guaranteed */
-				  0, 0, 0);
-#else
-	Stop compilation;
-#endif
-	ASSERT((status == STATUS_SUCCESS) || (status == STATUS_PENDING));
-}
-
-static void slic_init_cleanup(struct adapter *adapter)
-{
-	if (adapter->intrregistered) {
-		adapter->intrregistered = 0;
-		free_irq(adapter->netdev->irq, adapter->netdev);
-
-	}
-	if (adapter->pshmem) {
-		pci_free_consistent(adapter->pcidev,
-				    sizeof(struct slic_shmem),
-				    adapter->pshmem, adapter->phys_shmem);
-		adapter->pshmem = NULL;
-		adapter->phys_shmem = (dma_addr_t) NULL;
-	}
-
-	if (adapter->pingtimerset) {
-		adapter->pingtimerset = 0;
-		del_timer(&adapter->pingtimer);
-	}
-
-	slic_rspqueue_free(adapter);
-	slic_cmdq_free(adapter);
-	slic_rcvqueue_free(adapter);
-}
-
-static struct net_device_stats *slic_get_stats(struct net_device *dev)
-{
-	struct adapter *adapter = netdev_priv(dev);
-
-	ASSERT(adapter);
-	dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
-	dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
-	dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
-	dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
-	dev->stats.tx_heartbeat_errors = 0;
-	dev->stats.tx_aborted_errors = 0;
-	dev->stats.tx_window_errors = 0;
-	dev->stats.tx_fifo_errors = 0;
-	dev->stats.rx_frame_errors = 0;
-	dev->stats.rx_length_errors = 0;
-
-	return &dev->stats;
-}
-
-/*
- *  Allocate a mcast_address structure to hold the multicast address.
- *  Link it in.
- */
-static int slic_mcast_add_list(struct adapter *adapter, char *address)
-{
-	struct mcast_address *mcaddr, *mlist;
-
-	/* Check to see if it already exists */
-	mlist = adapter->mcastaddrs;
-	while (mlist) {
-		if (!compare_ether_addr(mlist->address, address))
-			return STATUS_SUCCESS;
-		mlist = mlist->next;
-	}
-
-	/* Doesn't already exist.  Allocate a structure to hold it */
-	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
-	if (mcaddr == NULL)
-		return 1;
-
-	memcpy(mcaddr->address, address, 6);
-
-	mcaddr->next = adapter->mcastaddrs;
-	adapter->mcastaddrs = mcaddr;
-
-	return STATUS_SUCCESS;
-}
-
 /*
  * Functions to obtain the CRC corresponding to the destination mac address.
  * This is a standard ethernet CRC in that it is a 32-bit, reflected CRC using
@@ -1362,44 +296,6 @@ static void slic_mcast_set_bit(struct adapter *adapter, char *address)
 	adapter->mcastmask |= (u64) 1 << crcpoly;
 }
 
-static void slic_mcast_set_list(struct net_device *dev)
-{
-	struct adapter *adapter = netdev_priv(dev);
-	int status = STATUS_SUCCESS;
-	char *addresses;
-	struct netdev_hw_addr *ha;
-
-	ASSERT(adapter);
-
-	netdev_for_each_mc_addr(ha, dev) {
-		addresses = (char *) &ha->addr;
-		status = slic_mcast_add_list(adapter, addresses);
-		if (status != STATUS_SUCCESS)
-			break;
-		slic_mcast_set_bit(adapter, addresses);
-	}
-
-	if (adapter->devflags_prev != dev->flags) {
-		adapter->macopts = MAC_DIRECTED;
-		if (dev->flags) {
-			if (dev->flags & IFF_BROADCAST)
-				adapter->macopts |= MAC_BCAST;
-			if (dev->flags & IFF_PROMISC)
-				adapter->macopts |= MAC_PROMISC;
-			if (dev->flags & IFF_ALLMULTI)
-				adapter->macopts |= MAC_ALLMCAST;
-			if (dev->flags & IFF_MULTICAST)
-				adapter->macopts |= MAC_MCAST;
-		}
-		adapter->devflags_prev = dev->flags;
-		slic_config_set(adapter, true);
-	} else {
-		if (status == STATUS_SUCCESS)
-			slic_mcast_set_mask(adapter);
-	}
-	return;
-}
-
 static void slic_mcast_set_mask(struct adapter *adapter)
 {
 	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
@@ -1439,123 +335,6 @@ static void slic_timer_ping(ulong dev)
 	add_timer(&adapter->pingtimer);
 }
 
-/*
- *  slic_if_init
- *
- *  Perform initialization of our slic interface.
- *
- */
-static int slic_if_init(struct adapter *adapter)
-{
-	struct sliccard *card = adapter->card;
-	struct net_device *dev = adapter->netdev;
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-	struct slic_shmem *pshmem;
-	int status = 0;
-
-	ASSERT(card);
-
-	/* adapter should be down at this point */
-	if (adapter->state != ADAPT_DOWN) {
-		dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
-			__func__);
-		return -EIO;
-	}
-	ASSERT(adapter->linkstate == LINK_DOWN);
-
-	adapter->devflags_prev = dev->flags;
-	adapter->macopts = MAC_DIRECTED;
-	if (dev->flags) {
-		if (dev->flags & IFF_BROADCAST)
-			adapter->macopts |= MAC_BCAST;
-		if (dev->flags & IFF_PROMISC)
-			adapter->macopts |= MAC_PROMISC;
-		if (dev->flags & IFF_ALLMULTI)
-			adapter->macopts |= MAC_ALLMCAST;
-		if (dev->flags & IFF_MULTICAST)
-			adapter->macopts |= MAC_MCAST;
-	}
-	status = slic_adapter_allocresources(adapter);
-	if (status != STATUS_SUCCESS) {
-		dev_err(&dev->dev,
-			"%s: slic_adapter_allocresources FAILED %x\n",
-			__func__, status);
-		slic_adapter_freeresources(adapter);
-		return status;
-	}
-
-	if (!adapter->queues_initialized) {
-		if (slic_rspqueue_init(adapter))
-			return -ENOMEM;
-		if (slic_cmdq_init(adapter))
-			return -ENOMEM;
-		if (slic_rcvqueue_init(adapter))
-			return -ENOMEM;
-		adapter->queues_initialized = 1;
-	}
-
-	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
-	mdelay(1);
-
-	if (!adapter->isp_initialized) {
-		pshmem = (struct slic_shmem *)adapter->phys_shmem;
-
-		spin_lock_irqsave(&adapter->bit64reglock.lock,
-					adapter->bit64reglock.flags);
-
-#if defined(CONFIG_X86_64)
-		slic_reg32_write(&slic_regs->slic_addr_upper,
-				 SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
-		slic_reg32_write(&slic_regs->slic_isp,
-				 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
-#elif defined(CONFIG_X86)
-		slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
-		slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
-#else
-		Stop Compilations
-#endif
-		spin_unlock_irqrestore(&adapter->bit64reglock.lock,
-					adapter->bit64reglock.flags);
-		adapter->isp_initialized = 1;
-	}
-
-	adapter->state = ADAPT_UP;
-	if (!card->loadtimerset) {
-		init_timer(&card->loadtimer);
-		card->loadtimer.expires =
-		    jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
-		card->loadtimer.data = (ulong) card;
-		card->loadtimer.function = &slic_timer_load_check;
-		add_timer(&card->loadtimer);
-
-		card->loadtimerset = 1;
-	}
-
-	if (!adapter->pingtimerset) {
-		init_timer(&adapter->pingtimer);
-		adapter->pingtimer.expires =
-		    jiffies + (PING_TIMER_INTERVAL * HZ);
-		adapter->pingtimer.data = (ulong) dev;
-		adapter->pingtimer.function = &slic_timer_ping;
-		add_timer(&adapter->pingtimer);
-		adapter->pingtimerset = 1;
-		adapter->card->pingstatus = ISR_PINGMASK;
-	}
-
-	/*
-	 *    clear any pending events, then enable interrupts
-	 */
-	adapter->isrcopy = 0;
-	adapter->pshmem->isr = 0;
-	slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
-	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
-
-	slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
-	slic_link_event_handler(adapter);
-
-	return STATUS_SUCCESS;
-}
-
 static void slic_unmap_mmio_space(struct adapter *adapter)
 {
 	if (adapter->slic_regs)
@@ -1563,64 +342,6 @@ static void slic_unmap_mmio_space(struct adapter *adapter)
 	adapter->slic_regs = NULL;
 }
 
-static int slic_adapter_allocresources(struct adapter *adapter)
-{
-	if (!adapter->intrregistered) {
-		int retval;
-
-		spin_unlock_irqrestore(&slic_global.driver_lock.lock,
-					slic_global.driver_lock.flags);
-
-		retval = request_irq(adapter->netdev->irq,
-				     &slic_interrupt,
-				     IRQF_SHARED,
-				     adapter->netdev->name, adapter->netdev);
-
-		spin_lock_irqsave(&slic_global.driver_lock.lock,
-					slic_global.driver_lock.flags);
-
-		if (retval) {
-			dev_err(&adapter->netdev->dev,
-				"request_irq (%s) FAILED [%x]\n",
-				adapter->netdev->name, retval);
-			return retval;
-		}
-		adapter->intrregistered = 1;
-	}
-	return STATUS_SUCCESS;
-}
-
-static void slic_config_pci(struct pci_dev *pcidev)
-{
-	u16 pci_command;
-	u16 new_command;
-
-	pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
-
-	new_command = pci_command | PCI_COMMAND_MASTER
-	    | PCI_COMMAND_MEMORY
-	    | PCI_COMMAND_INVALIDATE
-	    | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
-	if (pci_command != new_command)
-		pci_write_config_word(pcidev, PCI_COMMAND, new_command);
-}
-
-static void slic_adapter_freeresources(struct adapter *adapter)
-{
-	slic_init_cleanup(adapter);
-	memset(&adapter->stats, 0, sizeof(struct net_device_stats));
-	adapter->error_interrupts = 0;
-	adapter->rcv_interrupts = 0;
-	adapter->xmit_interrupts = 0;
-	adapter->linkevent_interrupts = 0;
-	adapter->upr_interrupts = 0;
-	adapter->num_isrs = 0;
-	adapter->xmit_completes = 0;
-	adapter->rcv_broadcasts = 0;
-	adapter->rcv_multicasts = 0;
-	adapter->rcv_unicasts = 0;
-}
-
 /*
  *  slic_link_config
  *
@@ -1774,18 +495,6 @@ static void slic_link_config(struct adapter *adapter,
 	}
 }
 
-static void slic_card_cleanup(struct sliccard *card)
-{
-	if (card->loadtimerset) {
-		card->loadtimerset = 0;
-		del_timer(&card->loadtimer);
-	}
-
-	slic_debug_card_destroy(card);
-
-	kfree(card);
-}
-
 static int slic_card_download_gbrcv(struct adapter *adapter)
 {
 	const struct firmware *fw;
@@ -1967,7 +676,7 @@ static int slic_card_download(struct adapter *adapter)
 	   and reach mainloop */
 	mdelay(20);
 
-	return STATUS_SUCCESS;
+	return 0;
 }
 
 MODULE_FIRMWARE("slicoss/oasisdownload.sys");
@@ -1999,327 +708,72 @@ static void slic_intagg_set(struct adapter *adapter, u32 value)
 	adapter->card->loadlevel_current = value;
 }
 
-static int slic_card_init(struct sliccard *card, struct adapter *adapter)
+static void slic_soft_reset(struct adapter *adapter)
 {
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-	struct slic_eeprom *peeprom;
-	struct oslic_eeprom *pOeeprom;
-	dma_addr_t phys_config;
-	u32 phys_configh;
-	u32 phys_configl;
-	u32 i = 0;
-	struct slic_shmem *pshmem;
-	int status;
-	uint macaddrs = card->card_size;
-	ushort eecodesize;
-	ushort dramsize;
-	ushort ee_chksum;
-	ushort calc_chksum;
-	struct slic_config_mac *pmac;
-	unsigned char fruformat;
-	unsigned char oemfruformat;
-	struct atk_fru *patkfru;
-	union oemfru *poemfru;
-
-	/* Reset everything except PCI configuration space */
-	slic_soft_reset(adapter);
-
-	/* Download the microcode */
-	status = slic_card_download(adapter);
-
-	if (status != STATUS_SUCCESS) {
-		dev_err(&adapter->pcidev->dev,
-			"download failed bus %d slot %d\n",
-			adapter->busnumber, adapter->slotnumber);
-		return status;
-	}
-
-	if (!card->config_set) {
-		peeprom = pci_alloc_consistent(adapter->pcidev,
-					       sizeof(struct slic_eeprom),
-					       &phys_config);
-
-		phys_configl = SLIC_GET_ADDR_LOW(phys_config);
-		phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
-
-		if (!peeprom) {
-			dev_err(&adapter->pcidev->dev,
-				"eeprom read failed to get memory "
-				"bus %d slot %d\n", adapter->busnumber,
-				adapter->slotnumber);
-			return -ENOMEM;
-		} else {
-			memset(peeprom, 0, sizeof(struct slic_eeprom));
-		}
-		slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+	if (adapter->card->state == CARD_UP) {
+		slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
 		mdelay(1);
-		pshmem = (struct slic_shmem *)adapter->phys_shmem;
-
-		spin_lock_irqsave(&adapter->bit64reglock.lock,
-					adapter->bit64reglock.flags);
-		slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
-		slic_reg32_write(&slic_regs->slic_isp,
-				 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
-		spin_unlock_irqrestore(&adapter->bit64reglock.lock,
-					adapter->bit64reglock.flags);
-
-		slic_config_get(adapter, phys_configl, phys_configh);
-
-		for (;;) {
-			if (adapter->pshmem->isr) {
-				if (adapter->pshmem->isr & ISR_UPC) {
-					adapter->pshmem->isr = 0;
-					slic_reg64_write(adapter,
-						&slic_regs->slic_isp, 0,
-						&slic_regs->slic_addr_upper,
-						0, FLUSH);
-					slic_reg32_write(&slic_regs->slic_isr,
-							 0, FLUSH);
-
-					slic_upr_request_complete(adapter, 0);
-					break;
-				} else {
-					adapter->pshmem->isr = 0;
-					slic_reg32_write(&slic_regs->slic_isr,
-							 0, FLUSH);
-				}
-			} else {
-				mdelay(1);
-				i++;
-				if (i > 5000) {
-					dev_err(&adapter->pcidev->dev,
-						"%d config data fetch timed out!\n",
-						adapter->port);
-					slic_reg64_write(adapter,
-						&slic_regs->slic_isp, 0,
-						&slic_regs->slic_addr_upper,
-						0, FLUSH);
-					return -EINVAL;
-				}
-			}
-		}
-
-		switch (adapter->devid) {
-		/* Oasis card */
-		case SLIC_2GB_DEVICE_ID:
-			/* extract EEPROM data and pointers to EEPROM data */
-			pOeeprom = (struct oslic_eeprom *) peeprom;
-			eecodesize = pOeeprom->EecodeSize;
-			dramsize = pOeeprom->DramSize;
-			pmac = pOeeprom->MacInfo;
-			fruformat = pOeeprom->FruFormat;
-			patkfru = &pOeeprom->AtkFru;
-			oemfruformat = pOeeprom->OemFruFormat;
-			poemfru = &pOeeprom->OemFru;
-			macaddrs = 2;
-			/* Minor kludge for Oasis card
-			     get 2 MAC addresses from the
-			     EEPROM to ensure that function 1
-			     gets the Port 1 MAC address */
-			break;
-		default:
-			/* extract EEPROM data and pointers to EEPROM data */
-			eecodesize = peeprom->EecodeSize;
-			dramsize = peeprom->DramSize;
-			pmac = peeprom->u2.mac.MacInfo;
-			fruformat = peeprom->FruFormat;
-			patkfru = &peeprom->AtkFru;
-			oemfruformat = peeprom->OemFruFormat;
-			poemfru = &peeprom->OemFru;
-			break;
-		}
-
-		card->config.EepromValid = false;
-
-		/*  see if the EEPROM is valid by checking it's checksum */
-		if ((eecodesize <= MAX_EECODE_SIZE) &&
-		    (eecodesize >= MIN_EECODE_SIZE)) {
-
-			ee_chksum =
-			    *(u16 *) ((char *) peeprom + (eecodesize - 2));
-			/*
-			    calculate the EEPROM checksum
-			*/
-			calc_chksum =
-			    ~slic_eeprom_cksum((char *) peeprom,
-					       (eecodesize - 2));
-			/*
-			    if the ucdoe chksum flag bit worked,
-			    we wouldn't need this shit
-			*/
-			if (ee_chksum == calc_chksum)
-				card->config.EepromValid = true;
-		}
-		/*  copy in the DRAM size */
-		card->config.DramSize = dramsize;
-
-		/*  copy in the MAC address(es) */
-		for (i = 0; i < macaddrs; i++) {
-			memcpy(&card->config.MacInfo[i],
-			       &pmac[i], sizeof(struct slic_config_mac));
-		}
-
-		/*  copy the Alacritech FRU information */
-		card->config.FruFormat = fruformat;
-		memcpy(&card->config.AtkFru, patkfru,
-						sizeof(struct atk_fru));
-
-		pci_free_consistent(adapter->pcidev,
-				    sizeof(struct slic_eeprom),
-				    peeprom, phys_config);
-
-		if ((!card->config.EepromValid) &&
-		    (adapter->reg_params.fail_on_bad_eeprom)) {
-			slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
-					 &slic_regs->slic_addr_upper,
-					 0, FLUSH);
-			dev_err(&adapter->pcidev->dev,
-				"unsupported CONFIGURATION EEPROM invalid\n");
-			return -EINVAL;
-		}
-
-		card->config_set = 1;
 	}
 
-	if (slic_card_download_gbrcv(adapter)) {
-		dev_err(&adapter->pcidev->dev,
-			"unable to download GB receive microcode\n");
-		return -EINVAL;
-	}
-
-	if (slic_global.dynamic_intagg)
-		slic_intagg_set(adapter, 0);
-	else
-		slic_intagg_set(adapter, intagg_delay);
-
-	/*
-	 *  Initialize ping status to "ok"
-	 */
-	card->pingstatus = ISR_PINGMASK;
-
-	/*
-	 * Lastly, mark our card state as up and return success
-	 */
-	card->state = CARD_UP;
-	card->reset_in_progress = 0;
-
-	return STATUS_SUCCESS;
+	slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
+			 FLUSH);
+	mdelay(1);
 }
 
-static u32 slic_card_locate(struct adapter *adapter)
+static void slic_mac_address_config(struct adapter *adapter)
 {
-	struct sliccard *card = slic_global.slic_card;
-	struct physcard *physcard = slic_global.phys_card;
-	ushort card_hostid;
-	u16 __iomem *hostid_reg;
-	uint i;
-	uint rdhostid_offset = 0;
-
-	switch (adapter->devid) {
-	case SLIC_2GB_DEVICE_ID:
-		rdhostid_offset = SLIC_RDHOSTID_2GB;
-		break;
-	case SLIC_1GB_DEVICE_ID:
-		rdhostid_offset = SLIC_RDHOSTID_1GB;
-		break;
-	default:
-		ASSERT(0);
-		break;
-	}
+	u32 value;
+	u32 value2;
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
 
-	hostid_reg =
-	    (u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
-	    rdhostid_offset);
+	value = *(u32 *) &adapter->currmacaddr[2];
+	value = ntohl(value);
+	slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
+	slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
 
-	/* read the 16 bit hostid from SRAM */
-	card_hostid = (ushort) readw(hostid_reg);
+	value2 = (u32) ((adapter->currmacaddr[0] << 8 |
+			     adapter->currmacaddr[1]) & 0xFFFF);
 
-	/* Initialize a new card structure if need be */
-	if (card_hostid == SLIC_HOSTID_DEFAULT) {
-		card = kzalloc(sizeof(struct sliccard), GFP_KERNEL);
-		if (card == NULL)
-			return -ENOMEM;
+	slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
+	slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
 
-		card->next = slic_global.slic_card;
-		slic_global.slic_card = card;
-		card->busnumber = adapter->busnumber;
-		card->slotnumber = adapter->slotnumber;
+	/* Write our multicast mask out to the card.  This is done */
+	/* here in addition to the slic_mcast_addr_set routine     */
+	/* because ALL_MCAST may have been enabled or disabled     */
+	slic_mcast_set_mask(adapter);
+}
 
-		/* Find an available cardnum */
-		for (i = 0; i < SLIC_MAX_CARDS; i++) {
-			if (slic_global.cardnuminuse[i] == 0) {
-				slic_global.cardnuminuse[i] = 1;
-				card->cardnum = i;
-				break;
-			}
-		}
-		slic_global.num_slic_cards++;
+static void slic_mac_config(struct adapter *adapter)
+{
+	u32 value;
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
 
-		slic_debug_card_create(card);
+	/* Setup GMAC gaps */
+	if (adapter->linkspeed == LINK_1000MB) {
+		value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
+			 (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
+			 (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
 	} else {
-		/* Card exists, find the card this adapter belongs to */
-		while (card) {
-			if (card->cardnum == card_hostid)
-				break;
-			card = card->next;
-		}
-	}
-
-	ASSERT(card);
-	if (!card)
-		return STATUS_FAILURE;
-	/* Put the adapter in the card's adapter list */
-	ASSERT(card->adapter[adapter->port] == NULL);
-	if (!card->adapter[adapter->port]) {
-		card->adapter[adapter->port] = adapter;
-		adapter->card = card;
+		value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
+			 (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
+			 (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
 	}
 
-	card->card_size = 1;	/* one port per *logical* card */
-
-	while (physcard) {
-		for (i = 0; i < SLIC_MAX_PORTS; i++) {
-			if (!physcard->adapter[i])
-				continue;
-			else
-				break;
-		}
-		ASSERT(i != SLIC_MAX_PORTS);
-		if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
-			break;
-		physcard = physcard->next;
-	}
-	if (!physcard) {
-		/* no structure allocated for this physical card yet */
-		physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
-		ASSERT(physcard);
+	/* enable GMII */
+	if (adapter->linkspeed == LINK_1000MB)
+		value |= GMCR_GBIT;
 
-		physcard->next = slic_global.phys_card;
-		slic_global.phys_card = physcard;
-		physcard->adapters_allocd = 1;
-	} else {
-		physcard->adapters_allocd++;
+	/* enable fullduplex */
+	if ((adapter->linkduplex == LINK_FULLD)
+	    || (adapter->macopts & MAC_LOOPBACK)) {
+		value |= GMCR_FULLD;
 	}
-	/* Note - this is ZERO relative */
-	adapter->physport = physcard->adapters_allocd - 1;
-
-	ASSERT(physcard->adapter[adapter->physport] == NULL);
-	physcard->adapter[adapter->physport] = adapter;
-	adapter->physcard = physcard;
-
-	return 0;
-}
 
-static void slic_soft_reset(struct adapter *adapter)
-{
-	if (adapter->card->state == CARD_UP) {
-		slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
-		mdelay(1);
-	}
+	/* write mac config */
+	slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
 
-	slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
-			 FLUSH);
-	mdelay(1);
+	/* setup mac addresses */
+	slic_mac_address_config(adapter);
 }
 
 static void slic_config_set(struct adapter *adapter, bool linkchange)
@@ -2403,76 +857,10 @@ static void slic_config_clear(struct adapter *adapter)
 	slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
 }
 
-static void slic_config_get(struct adapter *adapter, u32 config,
-							u32 config_h)
-{
-	int status;
-
-	status = slic_upr_request(adapter,
-				  SLIC_UPR_RCONFIG,
-				  (u32) config, (u32) config_h, 0, 0);
-	ASSERT(status == 0);
-}
-
-static void slic_mac_address_config(struct adapter *adapter)
-{
-	u32 value;
-	u32 value2;
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-
-	value = *(u32 *) &adapter->currmacaddr[2];
-	value = ntohl(value);
-	slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
-	slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
-
-	value2 = (u32) ((adapter->currmacaddr[0] << 8 |
-			     adapter->currmacaddr[1]) & 0xFFFF);
-
-	slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
-	slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
-
-	/* Write our multicast mask out to the card.  This is done */
-	/* here in addition to the slic_mcast_addr_set routine     */
-	/* because ALL_MCAST may have been enabled or disabled     */
-	slic_mcast_set_mask(adapter);
-}
-
-static void slic_mac_config(struct adapter *adapter)
-{
-	u32 value;
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-
-	/* Setup GMAC gaps */
-	if (adapter->linkspeed == LINK_1000MB) {
-		value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
-			 (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
-			 (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
-	} else {
-		value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
-			 (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
-			 (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
-	}
-
-	/* enable GMII */
-	if (adapter->linkspeed == LINK_1000MB)
-		value |= GMCR_GBIT;
-
-	/* enable fullduplex */
-	if ((adapter->linkduplex == LINK_FULLD)
-	    || (adapter->macopts & MAC_LOOPBACK)) {
-		value |= GMCR_FULLD;
-	}
-
-	/* write mac config */
-	slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
-
-	/* setup mac addresses */
-	slic_mac_address_config(adapter);
-}
-
 static bool slic_mac_filter(struct adapter *adapter,
 			struct ether_header *ether_frame)
 {
+	struct net_device *netdev = adapter->netdev;
 	u32 opts = adapter->macopts;
 	u32 *dhost4 = (u32 *)&ether_frame->ether_dhost[0];
 	u16 *dhost2 = (u16 *)&ether_frame->ether_dhost[4];
@@ -2492,7 +880,7 @@ static bool slic_mac_filter(struct adapter *adapter,
 	if (ether_frame->ether_dhost[0] & 0x01) {
 		if (opts & MAC_ALLMCAST) {
 			adapter->rcv_multicasts++;
-			adapter->stats.multicast++;
+			netdev->stats.multicast++;
 			return true;
 		}
 		if (opts & MAC_MCAST) {
@@ -2502,7 +890,7 @@ static bool slic_mac_filter(struct adapter *adapter,
 				if (!compare_ether_addr(mcaddr->address,
 							ether_frame->ether_dhost)) {
 					adapter->rcv_multicasts++;
-					adapter->stats.multicast++;
+					netdev->stats.multicast++;
 					return true;
 				}
 				mcaddr = mcaddr->next;
@@ -2597,17 +985,6 @@ static void slic_timer_load_check(ulong cardaddr)
 	add_timer(&card->loadtimer);
 }
 
-static void slic_assert_fail(void)
-{
-	u32 cpuid;
-	u32 curr_pid;
-	cpuid = smp_processor_id();
-	curr_pid = current->pid;
-
-	printk(KERN_ERR "%s CPU # %d ---- PID # %d\n",
-	       __func__, cpuid, curr_pid);
-}
-
 static int slic_upr_queue_request(struct adapter *adapter,
 			   u32 upr_request,
 			   u32 upr_data,
@@ -2637,7 +1014,55 @@ static int slic_upr_queue_request(struct adapter *adapter,
 	} else {
 		adapter->upr_list = upr;
 	}
-	return STATUS_SUCCESS;
+	return 0;
+}
+
+static void slic_upr_start(struct adapter *adapter)
+{
+	struct slic_upr *upr;
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
+/*
+    char * ptr1;
+    char * ptr2;
+    uint cmdoffset;
+*/
+	upr = adapter->upr_list;
+	if (!upr)
+		return;
+	if (adapter->upr_busy)
+		return;
+	adapter->upr_busy = 1;
+
+	switch (upr->upr_request) {
+	case SLIC_UPR_STATS:
+		if (upr->upr_data_h == 0) {
+			slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
+					 FLUSH);
+		} else {
+			slic_reg64_write(adapter, &slic_regs->slic_stats64,
+					 upr->upr_data,
+					 &slic_regs->slic_addr_upper,
+					 upr->upr_data_h, FLUSH);
+		}
+		break;
+
+	case SLIC_UPR_RLSR:
+		slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
+				 &slic_regs->slic_addr_upper, upr->upr_data_h,
+				 FLUSH);
+		break;
+
+	case SLIC_UPR_RCONFIG:
+		slic_reg64_write(adapter, &slic_regs->slic_rconfig,
+				 upr->upr_data, &slic_regs->slic_addr_upper,
+				 upr->upr_data_h, FLUSH);
+		break;
+	case SLIC_UPR_PING:
+		slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
+		break;
+	default:
+		ASSERT(0);
+	}
 }
 
 static int slic_upr_request(struct adapter *adapter,
@@ -2646,22 +1071,97 @@ static int slic_upr_request(struct adapter *adapter,
 		     u32 upr_data_h,
 		     u32 upr_buffer, u32 upr_buffer_h)
 {
-	int status;
+	int rc;
 
 	spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
-	status = slic_upr_queue_request(adapter,
+	rc = slic_upr_queue_request(adapter,
 					upr_request,
 					upr_data,
 					upr_data_h, upr_buffer, upr_buffer_h);
-	if (status != STATUS_SUCCESS) {
-		spin_unlock_irqrestore(&adapter->upr_lock.lock,
-					adapter->upr_lock.flags);
-		return status;
-	}
+	if (rc)
+		goto err_unlock_irq;
+
 	slic_upr_start(adapter);
+err_unlock_irq:
 	spin_unlock_irqrestore(&adapter->upr_lock.lock,
 				adapter->upr_lock.flags);
-	return STATUS_PENDING;
+	return rc;
+}
+
+static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
+{
+	u32 linkstatus = adapter->pshmem->linkstatus;
+	uint linkup;
+	unsigned char linkspeed;
+	unsigned char linkduplex;
+
+	if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
+		struct slic_shmem *pshmem;
+
+		pshmem = (struct slic_shmem *)adapter->phys_shmem;
+#if defined(CONFIG_X86_64)
+		slic_upr_queue_request(adapter,
+				       SLIC_UPR_RLSR,
+				       SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
+				       SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
+				       0, 0);
+#elif defined(CONFIG_X86)
+		slic_upr_queue_request(adapter,
+				       SLIC_UPR_RLSR,
+				       (u32) &pshmem->linkstatus,
+				       SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
+#else
+		Stop Compilation;
+#endif
+		return;
+	}
+	if (adapter->state != ADAPT_UP)
+		return;
+
+	ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
+	       || (adapter->devid == SLIC_2GB_DEVICE_ID));
+
+	linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
+	if (linkstatus & GIG_SPEED_1000)
+		linkspeed = LINK_1000MB;
+	else if (linkstatus & GIG_SPEED_100)
+		linkspeed = LINK_100MB;
+	else
+		linkspeed = LINK_10MB;
+
+	if (linkstatus & GIG_FULLDUPLEX)
+		linkduplex = LINK_FULLD;
+	else
+		linkduplex = LINK_HALFD;
+
+	if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
+		return;
+
+	/* link up event, but nothing has changed */
+	if ((adapter->linkstate == LINK_UP) &&
+	    (linkup == LINK_UP) &&
+	    (adapter->linkspeed == linkspeed) &&
+	    (adapter->linkduplex == linkduplex))
+		return;
+
+	/* link has changed at this point */
+
+	/* link has gone from up to down */
+	if (linkup == LINK_DOWN) {
+		adapter->linkstate = LINK_DOWN;
+		return;
+	}
+
+	/* link has gone from down to up */
+	adapter->linkspeed = linkspeed;
+	adapter->linkduplex = linkduplex;
+
+	if (adapter->linkstate != LINK_UP) {
+		/* setup the mac */
+		slic_config_set(adapter, true);
+		adapter->linkstate = LINK_UP;
+		netif_start_queue(adapter->netdev);
+	}
 }
 
 static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
@@ -2786,128 +1286,15 @@ static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
 				adapter->upr_lock.flags);
 }
 
-static void slic_upr_start(struct adapter *adapter)
-{
-	struct slic_upr *upr;
-	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
-/*
-    char * ptr1;
-    char * ptr2;
-    uint cmdoffset;
-*/
-	upr = adapter->upr_list;
-	if (!upr)
-		return;
-	if (adapter->upr_busy)
-		return;
-	adapter->upr_busy = 1;
-
-	switch (upr->upr_request) {
-	case SLIC_UPR_STATS:
-		if (upr->upr_data_h == 0) {
-			slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
-					 FLUSH);
-		} else {
-			slic_reg64_write(adapter, &slic_regs->slic_stats64,
-					 upr->upr_data,
-					 &slic_regs->slic_addr_upper,
-					 upr->upr_data_h, FLUSH);
-		}
-		break;
-
-	case SLIC_UPR_RLSR:
-		slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
-				 &slic_regs->slic_addr_upper, upr->upr_data_h,
-				 FLUSH);
-		break;
-
-	case SLIC_UPR_RCONFIG:
-		slic_reg64_write(adapter, &slic_regs->slic_rconfig,
-				 upr->upr_data, &slic_regs->slic_addr_upper,
-				 upr->upr_data_h, FLUSH);
-		break;
-	case SLIC_UPR_PING:
-		slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
-		break;
-	default:
-		ASSERT(0);
-	}
-}
-
-static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
+static void slic_config_get(struct adapter *adapter, u32 config,
+							u32 config_h)
 {
-	u32 linkstatus = adapter->pshmem->linkstatus;
-	uint linkup;
-	unsigned char linkspeed;
-	unsigned char linkduplex;
-
-	if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
-		struct slic_shmem *pshmem;
-
-		pshmem = (struct slic_shmem *)adapter->phys_shmem;
-#if defined(CONFIG_X86_64)
-		slic_upr_queue_request(adapter,
-				       SLIC_UPR_RLSR,
-				       SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
-				       SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
-				       0, 0);
-#elif defined(CONFIG_X86)
-		slic_upr_queue_request(adapter,
-				       SLIC_UPR_RLSR,
-				       (u32) &pshmem->linkstatus,
-				       SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
-#else
-		Stop Compilation;
-#endif
-		return;
-	}
-	if (adapter->state != ADAPT_UP)
-		return;
-
-	ASSERT((adapter->devid == SLIC_1GB_DEVICE_ID)
-	       || (adapter->devid == SLIC_2GB_DEVICE_ID));
-
-	linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
-	if (linkstatus & GIG_SPEED_1000)
-		linkspeed = LINK_1000MB;
-	else if (linkstatus & GIG_SPEED_100)
-		linkspeed = LINK_100MB;
-	else
-		linkspeed = LINK_10MB;
-
-	if (linkstatus & GIG_FULLDUPLEX)
-		linkduplex = LINK_FULLD;
-	else
-		linkduplex = LINK_HALFD;
-
-	if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
-		return;
-
-	/* link up event, but nothing has changed */
-	if ((adapter->linkstate == LINK_UP) &&
-	    (linkup == LINK_UP) &&
-	    (adapter->linkspeed == linkspeed) &&
-	    (adapter->linkduplex == linkduplex))
-		return;
-
-	/* link has changed at this point */
-
-	/* link has gone from up to down */
-	if (linkup == LINK_DOWN) {
-		adapter->linkstate = LINK_DOWN;
-		return;
-	}
-
-	/* link has gone from down to up */
-	adapter->linkspeed = linkspeed;
-	adapter->linkduplex = linkduplex;
+	int status;
 
-	if (adapter->linkstate != LINK_UP) {
-		/* setup the mac */
-		slic_config_set(adapter, true);
-		adapter->linkstate = LINK_UP;
-		netif_start_queue(adapter->netdev);
-	}
+	status = slic_upr_request(adapter,
+				  SLIC_UPR_RCONFIG,
+				  (u32) config, (u32) config_h, 0, 0);
+	ASSERT(status == 0);
 }
 
 /*
@@ -3012,6 +1399,24 @@ static ushort slic_eeprom_cksum(char *m, int len)
 	return (ushort) sum;
 }
 
+static void slic_rspqueue_free(struct adapter *adapter)
+{
+	int i;
+	struct slic_rspqueue *rspq = &adapter->rspqueue;
+
+	for (i = 0; i < rspq->num_pages; i++) {
+		if (rspq->vaddr[i]) {
+			pci_free_consistent(adapter->pcidev, PAGE_SIZE,
+					    rspq->vaddr[i], rspq->paddr[i]);
+		}
+		rspq->vaddr[i] = NULL;
+		rspq->paddr[i] = 0;
+	}
+	rspq->offset = 0;
+	rspq->pageindex = 0;
+	rspq->rspbuf = NULL;
+}
+
 static int slic_rspqueue_init(struct adapter *adapter)
 {
 	int i;
@@ -3032,7 +1437,7 @@ static int slic_rspqueue_init(struct adapter *adapter)
 			dev_err(&adapter->pcidev->dev,
 				"pci_alloc_consistent failed\n");
 			slic_rspqueue_free(adapter);
-			return STATUS_FAILURE;
+			return -ENOMEM;
 		}
 #ifndef CONFIG_X86_64
 		ASSERT(((u32) rspq->vaddr[i] & 0xFFFFF000) ==
@@ -3056,25 +1461,7 @@ static int slic_rspqueue_init(struct adapter *adapter)
 	rspq->offset = 0;
 	rspq->pageindex = 0;
 	rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
-	return STATUS_SUCCESS;
-}
-
-static void slic_rspqueue_free(struct adapter *adapter)
-{
-	int i;
-	struct slic_rspqueue *rspq = &adapter->rspqueue;
-
-	for (i = 0; i < rspq->num_pages; i++) {
-		if (rspq->vaddr[i]) {
-			pci_free_consistent(adapter->pcidev, PAGE_SIZE,
-					    rspq->vaddr[i], rspq->paddr[i]);
-		}
-		rspq->vaddr[i] = NULL;
-		rspq->paddr[i] = 0;
-	}
-	rspq->offset = 0;
-	rspq->pageindex = 0;
-	rspq->rspbuf = NULL;
+	return 0;
 }
 
 static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
@@ -3159,36 +1546,6 @@ static u32 *slic_cmdqmem_addpage(struct adapter *adapter)
 	return pageaddr;
 }
 
-static int slic_cmdq_init(struct adapter *adapter)
-{
-	int i;
-	u32 *pageaddr;
-
-	ASSERT(adapter->state == ADAPT_DOWN);
-	memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
-	memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
-	memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
-	spin_lock_init(&adapter->cmdq_all.lock.lock);
-	spin_lock_init(&adapter->cmdq_free.lock.lock);
-	spin_lock_init(&adapter->cmdq_done.lock.lock);
-	slic_cmdqmem_init(adapter);
-	adapter->slic_handle_ix = 1;
-	for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
-		pageaddr = slic_cmdqmem_addpage(adapter);
-#ifndef CONFIG_X86_64
-		ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
-#endif
-		if (!pageaddr) {
-			slic_cmdq_free(adapter);
-			return STATUS_FAILURE;
-		}
-		slic_cmdq_addcmdpage(adapter, pageaddr);
-	}
-	adapter->slic_handle_ix = 1;
-
-	return STATUS_SUCCESS;
-}
-
 static void slic_cmdq_free(struct adapter *adapter)
 {
 	struct slic_hostcmd *cmd;
@@ -3212,53 +1569,6 @@ static void slic_cmdq_free(struct adapter *adapter)
 	slic_cmdqmem_free(adapter);
 }
 
-static void slic_cmdq_reset(struct adapter *adapter)
-{
-	struct slic_hostcmd *hcmd;
-	struct sk_buff *skb;
-	u32 outstanding;
-
-	spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
-			adapter->cmdq_free.lock.flags);
-	spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
-			adapter->cmdq_done.lock.flags);
-	outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
-	outstanding -= adapter->cmdq_free.count;
-	hcmd = adapter->cmdq_all.head;
-	while (hcmd) {
-		if (hcmd->busy) {
-			skb = hcmd->skb;
-			ASSERT(skb);
-			hcmd->busy = 0;
-			hcmd->skb = NULL;
-			dev_kfree_skb_irq(skb);
-		}
-		hcmd = hcmd->next_all;
-	}
-	adapter->cmdq_free.count = 0;
-	adapter->cmdq_free.head = NULL;
-	adapter->cmdq_free.tail = NULL;
-	adapter->cmdq_done.count = 0;
-	adapter->cmdq_done.head = NULL;
-	adapter->cmdq_done.tail = NULL;
-	adapter->cmdq_free.head = adapter->cmdq_all.head;
-	hcmd = adapter->cmdq_all.head;
-	while (hcmd) {
-		adapter->cmdq_free.count++;
-		hcmd->next = hcmd->next_all;
-		hcmd = hcmd->next_all;
-	}
-	if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
-		dev_err(&adapter->netdev->dev,
-			"free_count %d != all count %d\n",
-			adapter->cmdq_free.count, adapter->cmdq_all.count);
-	}
-	spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
-				adapter->cmdq_done.lock.flags);
-	spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
-				adapter->cmdq_free.lock.flags);
-}
-
 static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
 {
 	struct slic_hostcmd *cmd;
@@ -3324,6 +1634,99 @@ static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
 	spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
 }
 
+static int slic_cmdq_init(struct adapter *adapter)
+{
+	int i;
+	u32 *pageaddr;
+
+	ASSERT(adapter->state == ADAPT_DOWN);
+	memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
+	memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
+	memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
+	spin_lock_init(&adapter->cmdq_all.lock.lock);
+	spin_lock_init(&adapter->cmdq_free.lock.lock);
+	spin_lock_init(&adapter->cmdq_done.lock.lock);
+	slic_cmdqmem_init(adapter);
+	adapter->slic_handle_ix = 1;
+	for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
+		pageaddr = slic_cmdqmem_addpage(adapter);
+#ifndef CONFIG_X86_64
+		ASSERT(((u32) pageaddr & 0xFFFFF000) == (u32) pageaddr);
+#endif
+		if (!pageaddr) {
+			slic_cmdq_free(adapter);
+			return -ENOMEM;
+		}
+		slic_cmdq_addcmdpage(adapter, pageaddr);
+	}
+	adapter->slic_handle_ix = 1;
+
+	return 0;
+}
+
+static void slic_cmdq_reset(struct adapter *adapter)
+{
+	struct slic_hostcmd *hcmd;
+	struct sk_buff *skb;
+	u32 outstanding;
+
+	spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
+			adapter->cmdq_free.lock.flags);
+	spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
+			adapter->cmdq_done.lock.flags);
+	outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
+	outstanding -= adapter->cmdq_free.count;
+	hcmd = adapter->cmdq_all.head;
+	while (hcmd) {
+		if (hcmd->busy) {
+			skb = hcmd->skb;
+			ASSERT(skb);
+			hcmd->busy = 0;
+			hcmd->skb = NULL;
+			dev_kfree_skb_irq(skb);
+		}
+		hcmd = hcmd->next_all;
+	}
+	adapter->cmdq_free.count = 0;
+	adapter->cmdq_free.head = NULL;
+	adapter->cmdq_free.tail = NULL;
+	adapter->cmdq_done.count = 0;
+	adapter->cmdq_done.head = NULL;
+	adapter->cmdq_done.tail = NULL;
+	adapter->cmdq_free.head = adapter->cmdq_all.head;
+	hcmd = adapter->cmdq_all.head;
+	while (hcmd) {
+		adapter->cmdq_free.count++;
+		hcmd->next = hcmd->next_all;
+		hcmd = hcmd->next_all;
+	}
+	if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
+		dev_err(&adapter->netdev->dev,
+			"free_count %d != all count %d\n",
+			adapter->cmdq_free.count, adapter->cmdq_all.count);
+	}
+	spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
+				adapter->cmdq_done.lock.flags);
+	spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
+				adapter->cmdq_free.lock.flags);
+}
+
+static void slic_cmdq_getdone(struct adapter *adapter)
+{
+	struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
+	struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
+
+	ASSERT(free_cmdq->head == NULL);
+	spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
+
+	free_cmdq->head = done_cmdq->head;
+	free_cmdq->count = done_cmdq->count;
+	done_cmdq->head = NULL;
+	done_cmdq->tail = NULL;
+	done_cmdq->count = 0;
+	spin_unlock_irqrestore(&done_cmdq->lock.lock, done_cmdq->lock.flags);
+}
+
 static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter)
 {
 	struct slic_cmdqueue *cmdq = &adapter->cmdq_free;
@@ -3357,22 +1760,6 @@ retry:
 	return cmd;
 }
 
-static void slic_cmdq_getdone(struct adapter *adapter)
-{
-	struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
-	struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
-
-	ASSERT(free_cmdq->head == NULL);
-	spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
-
-	free_cmdq->head = done_cmdq->head;
-	free_cmdq->count = done_cmdq->count;
-	done_cmdq->head = NULL;
-	done_cmdq->tail = NULL;
-	done_cmdq->count = 0;
-	spin_unlock_irqrestore(&done_cmdq->lock.lock, done_cmdq->lock.flags);
-}
-
 static void slic_cmdq_putdone_irq(struct adapter *adapter,
 				struct slic_hostcmd *cmd)
 {
@@ -3388,79 +1775,6 @@ static void slic_cmdq_putdone_irq(struct adapter *adapter,
 	spin_unlock(&cmdq->lock.lock);
 }
 
-static int slic_rcvqueue_init(struct adapter *adapter)
-{
-	int i, count;
-	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
-
-	ASSERT(adapter->state == ADAPT_DOWN);
-	rcvq->tail = NULL;
-	rcvq->head = NULL;
-	rcvq->size = SLIC_RCVQ_ENTRIES;
-	rcvq->errors = 0;
-	rcvq->count = 0;
-	i = (SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES);
-	count = 0;
-	while (i) {
-		count += slic_rcvqueue_fill(adapter);
-		i--;
-	}
-	if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
-		slic_rcvqueue_free(adapter);
-		return STATUS_FAILURE;
-	}
-	return STATUS_SUCCESS;
-}
-
-static void slic_rcvqueue_free(struct adapter *adapter)
-{
-	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
-	struct sk_buff *skb;
-
-	while (rcvq->head) {
-		skb = rcvq->head;
-		rcvq->head = rcvq->head->next;
-		dev_kfree_skb(skb);
-	}
-	rcvq->tail = NULL;
-	rcvq->head = NULL;
-	rcvq->count = 0;
-}
-
-static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
-{
-	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
-	struct sk_buff *skb;
-	struct slic_rcvbuf *rcvbuf;
-	int count;
-
-	if (rcvq->count) {
-		skb = rcvq->head;
-		rcvbuf = (struct slic_rcvbuf *)skb->head;
-		ASSERT(rcvbuf);
-
-		if (rcvbuf->status & IRHDDR_SVALID) {
-			rcvq->head = rcvq->head->next;
-			skb->next = NULL;
-			rcvq->count--;
-		} else {
-			skb = NULL;
-		}
-	} else {
-		dev_err(&adapter->netdev->dev,
-			"RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
-		skb = NULL;
-	}
-	while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
-		count = slic_rcvqueue_fill(adapter);
-		if (!count)
-			break;
-	}
-	if (skb)
-		rcvq->errors = 0;
-	return skb;
-}
-
 static int slic_rcvqueue_fill(struct adapter *adapter)
 {
 	void *paddr;
@@ -3548,6 +1862,79 @@ retry_rcvqfill:
 	return i;
 }
 
+static void slic_rcvqueue_free(struct adapter *adapter)
+{
+	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
+	struct sk_buff *skb;
+
+	while (rcvq->head) {
+		skb = rcvq->head;
+		rcvq->head = rcvq->head->next;
+		dev_kfree_skb(skb);
+	}
+	rcvq->tail = NULL;
+	rcvq->head = NULL;
+	rcvq->count = 0;
+}
+
+static int slic_rcvqueue_init(struct adapter *adapter)
+{
+	int i, count;
+	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
+
+	ASSERT(adapter->state == ADAPT_DOWN);
+	rcvq->tail = NULL;
+	rcvq->head = NULL;
+	rcvq->size = SLIC_RCVQ_ENTRIES;
+	rcvq->errors = 0;
+	rcvq->count = 0;
+	i = (SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES);
+	count = 0;
+	while (i) {
+		count += slic_rcvqueue_fill(adapter);
+		i--;
+	}
+	if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
+		slic_rcvqueue_free(adapter);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
+{
+	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
+	struct sk_buff *skb;
+	struct slic_rcvbuf *rcvbuf;
+	int count;
+
+	if (rcvq->count) {
+		skb = rcvq->head;
+		rcvbuf = (struct slic_rcvbuf *)skb->head;
+		ASSERT(rcvbuf);
+
+		if (rcvbuf->status & IRHDDR_SVALID) {
+			rcvq->head = rcvq->head->next;
+			skb->next = NULL;
+			rcvq->count--;
+		} else {
+			skb = NULL;
+		}
+	} else {
+		dev_err(&adapter->netdev->dev,
+			"RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
+		skb = NULL;
+	}
+	while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
+		count = slic_rcvqueue_fill(adapter);
+		if (!count)
+			break;
+	}
+	if (skb)
+		rcvq->errors = 0;
+	return skb;
+}
+
 static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
 {
 	struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
@@ -3813,11 +2200,10 @@ static int slic_debug_card_show(struct seq_file *seq, void *v)
 static int slic_debug_adapter_show(struct seq_file *seq, void *v)
 {
 	struct adapter *adapter = seq->private;
+	struct net_device *netdev = adapter->netdev;
 
-	if ((adapter->netdev) && (adapter->netdev->name)) {
-		seq_printf(seq, "info: interface          : %s\n",
+	seq_printf(seq, "info: interface          : %s\n",
 			    adapter->netdev->name);
-	}
 	seq_printf(seq, "info: status             : %s\n",
 		SLIC_LINKSTATE(adapter->linkstate));
 	seq_printf(seq, "info: port               : %d\n",
@@ -3835,9 +2221,9 @@ static int slic_debug_adapter_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "info: RcvQ current       : %4.4X\n",
 		    adapter->rcvqueue.count);
 	seq_printf(seq, "rx stats: packets                  : %8.8lX\n",
-		    adapter->stats.rx_packets);
+		    netdev->stats.rx_packets);
 	seq_printf(seq, "rx stats: bytes                    : %8.8lX\n",
-		    adapter->stats.rx_bytes);
+		    netdev->stats.rx_bytes);
 	seq_printf(seq, "rx stats: broadcasts               : %8.8X\n",
 		    adapter->rcv_broadcasts);
 	seq_printf(seq, "rx stats: multicasts               : %8.8X\n",
@@ -3851,13 +2237,13 @@ static int slic_debug_adapter_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "rx stats: drops                    : %8.8X\n",
 			(u32) adapter->rcv_drops);
 	seq_printf(seq, "tx stats: packets                  : %8.8lX\n",
-			adapter->stats.tx_packets);
+			netdev->stats.tx_packets);
 	seq_printf(seq, "tx stats: bytes                    : %8.8lX\n",
-			adapter->stats.tx_bytes);
+			netdev->stats.tx_bytes);
 	seq_printf(seq, "tx stats: errors                   : %8.8X\n",
 			(u32) adapter->slic_stats.iface.xmt_errors);
 	seq_printf(seq, "rx stats: multicasts               : %8.8lX\n",
-			adapter->stats.multicast);
+			netdev->stats.multicast);
 	seq_printf(seq, "tx stats: collision errors         : %8.8X\n",
 			(u32) adapter->slic_stats.iface.xmit_collisions);
 	seq_printf(seq, "perf: Max rcv frames/isr           : %8.8X\n",
@@ -4039,9 +2425,1555 @@ static void slic_debug_cleanup(void)
 	}
 }
 
-/******************************************************************************/
-/****************   MODULE INITIATION / TERMINATION FUNCTIONS   ***************/
-/******************************************************************************/
+/*
+ * slic_link_event_handler -
+ *
+ * Initiate a link configuration sequence.  The link configuration begins
+ * by issuing a READ_LINK_STATUS command to the Utility Processor on the
+ * SLIC.  Since the command finishes asynchronously, the slic_upr_comlete
+ * routine will follow it up witha UP configuration write command, which
+ * will also complete asynchronously.
+ *
+ */
+static void slic_link_event_handler(struct adapter *adapter)
+{
+	int status;
+	struct slic_shmem *pshmem;
+
+	if (adapter->state != ADAPT_UP) {
+		/* Adapter is not operational.  Ignore.  */
+		return;
+	}
+
+	pshmem = (struct slic_shmem *)adapter->phys_shmem;
+
+#if defined(CONFIG_X86_64)
+	status = slic_upr_request(adapter,
+				  SLIC_UPR_RLSR,
+				  SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
+				  SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
+				  0, 0);
+#elif defined(CONFIG_X86)
+	status = slic_upr_request(adapter, SLIC_UPR_RLSR,
+		(u32) &pshmem->linkstatus,	/* no 4GB wrap guaranteed */
+				  0, 0, 0);
+#else
+	Stop compilation;
+#endif
+	ASSERT(status == 0);
+}
+
+static void slic_init_cleanup(struct adapter *adapter)
+{
+	if (adapter->intrregistered) {
+		adapter->intrregistered = 0;
+		free_irq(adapter->netdev->irq, adapter->netdev);
+
+	}
+	if (adapter->pshmem) {
+		pci_free_consistent(adapter->pcidev,
+				    sizeof(struct slic_shmem),
+				    adapter->pshmem, adapter->phys_shmem);
+		adapter->pshmem = NULL;
+		adapter->phys_shmem = (dma_addr_t) NULL;
+	}
+
+	if (adapter->pingtimerset) {
+		adapter->pingtimerset = 0;
+		del_timer(&adapter->pingtimer);
+	}
+
+	slic_rspqueue_free(adapter);
+	slic_cmdq_free(adapter);
+	slic_rcvqueue_free(adapter);
+}
+
+/*
+ *  Allocate a mcast_address structure to hold the multicast address.
+ *  Link it in.
+ */
+static int slic_mcast_add_list(struct adapter *adapter, char *address)
+{
+	struct mcast_address *mcaddr, *mlist;
+
+	/* Check to see if it already exists */
+	mlist = adapter->mcastaddrs;
+	while (mlist) {
+		if (!compare_ether_addr(mlist->address, address))
+			return 0;
+		mlist = mlist->next;
+	}
+
+	/* Doesn't already exist.  Allocate a structure to hold it */
+	mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
+	if (mcaddr == NULL)
+		return 1;
+
+	memcpy(mcaddr->address, address, 6);
+
+	mcaddr->next = adapter->mcastaddrs;
+	adapter->mcastaddrs = mcaddr;
+
+	return 0;
+}
+
+static void slic_mcast_set_list(struct net_device *dev)
+{
+	struct adapter *adapter = netdev_priv(dev);
+	int status = 0;
+	char *addresses;
+	struct netdev_hw_addr *ha;
+
+	ASSERT(adapter);
+
+	netdev_for_each_mc_addr(ha, dev) {
+		addresses = (char *) &ha->addr;
+		status = slic_mcast_add_list(adapter, addresses);
+		if (status != 0)
+			break;
+		slic_mcast_set_bit(adapter, addresses);
+	}
+
+	if (adapter->devflags_prev != dev->flags) {
+		adapter->macopts = MAC_DIRECTED;
+		if (dev->flags) {
+			if (dev->flags & IFF_BROADCAST)
+				adapter->macopts |= MAC_BCAST;
+			if (dev->flags & IFF_PROMISC)
+				adapter->macopts |= MAC_PROMISC;
+			if (dev->flags & IFF_ALLMULTI)
+				adapter->macopts |= MAC_ALLMCAST;
+			if (dev->flags & IFF_MULTICAST)
+				adapter->macopts |= MAC_MCAST;
+		}
+		adapter->devflags_prev = dev->flags;
+		slic_config_set(adapter, true);
+	} else {
+		if (status == 0)
+			slic_mcast_set_mask(adapter);
+	}
+	return;
+}
+
+#define  XMIT_FAIL_LINK_STATE               1
+#define  XMIT_FAIL_ZERO_LENGTH              2
+#define  XMIT_FAIL_HOSTCMD_FAIL             3
+
+static void slic_xmit_build_request(struct adapter *adapter,
+			     struct slic_hostcmd *hcmd, struct sk_buff *skb)
+{
+	struct slic_host64_cmd *ihcmd;
+	ulong phys_addr;
+
+	ihcmd = &hcmd->cmd64;
+
+	ihcmd->flags = (adapter->port << IHFLG_IFSHFT);
+	ihcmd->command = IHCMD_XMT_REQ;
+	ihcmd->u.slic_buffers.totlen = skb->len;
+	phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
+			PCI_DMA_TODEVICE);
+	ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
+	ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
+	ihcmd->u.slic_buffers.bufs[0].length = skb->len;
+#if defined(CONFIG_X86_64)
+	hcmd->cmdsize = (u32) ((((u64)&ihcmd->u.slic_buffers.bufs[1] -
+				     (u64) hcmd) + 31) >> 5);
+#elif defined(CONFIG_X86)
+	hcmd->cmdsize = ((((u32) &ihcmd->u.slic_buffers.bufs[1] -
+			   (u32) hcmd) + 31) >> 5);
+#else
+	Stop Compilation;
+#endif
+}
+
+static void slic_xmit_fail(struct adapter *adapter,
+		    struct sk_buff *skb,
+		    void *cmd, u32 skbtype, u32 status)
+{
+	if (adapter->xmitq_full)
+		netif_stop_queue(adapter->netdev);
+	if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
+		switch (status) {
+		case XMIT_FAIL_LINK_STATE:
+			dev_err(&adapter->netdev->dev,
+				"reject xmit skb[%p: %x] linkstate[%s] "
+				"adapter[%s:%d] card[%s:%d]\n",
+				skb, skb->pkt_type,
+				SLIC_LINKSTATE(adapter->linkstate),
+				SLIC_ADAPTER_STATE(adapter->state),
+				adapter->state,
+				SLIC_CARD_STATE(adapter->card->state),
+				adapter->card->state);
+			break;
+		case XMIT_FAIL_ZERO_LENGTH:
+			dev_err(&adapter->netdev->dev,
+				"xmit_start skb->len == 0 skb[%p] type[%x]\n",
+				skb, skb->pkt_type);
+			break;
+		case XMIT_FAIL_HOSTCMD_FAIL:
+			dev_err(&adapter->netdev->dev,
+				"xmit_start skb[%p] type[%x] No host commands "
+				"available\n", skb, skb->pkt_type);
+			break;
+		default:
+			ASSERT(0);
+		}
+	}
+	dev_kfree_skb(skb);
+	adapter->netdev->stats.tx_dropped++;
+}
+
+static void slic_rcv_handle_error(struct adapter *adapter,
+					struct slic_rcvbuf *rcvbuf)
+{
+	struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
+	struct net_device *netdev = adapter->netdev;
+
+	if (adapter->devid != SLIC_1GB_DEVICE_ID) {
+		if (hdr->frame_status14 & VRHSTAT_802OE)
+			adapter->if_events.oflow802++;
+		if (hdr->frame_status14 & VRHSTAT_TPOFLO)
+			adapter->if_events.Tprtoflow++;
+		if (hdr->frame_status_b14 & VRHSTATB_802UE)
+			adapter->if_events.uflow802++;
+		if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
+			adapter->if_events.rcvearly++;
+			netdev->stats.rx_fifo_errors++;
+		}
+		if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
+			adapter->if_events.Bufov++;
+			netdev->stats.rx_over_errors++;
+		}
+		if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
+			adapter->if_events.Carre++;
+			netdev->stats.tx_carrier_errors++;
+		}
+		if (hdr->frame_status_b14 & VRHSTATB_LONGE)
+			adapter->if_events.Longe++;
+		if (hdr->frame_status_b14 & VRHSTATB_PREA)
+			adapter->if_events.Invp++;
+		if (hdr->frame_status_b14 & VRHSTATB_CRC) {
+			adapter->if_events.Crc++;
+			netdev->stats.rx_crc_errors++;
+		}
+		if (hdr->frame_status_b14 & VRHSTATB_DRBL)
+			adapter->if_events.Drbl++;
+		if (hdr->frame_status_b14 & VRHSTATB_CODE)
+			adapter->if_events.Code++;
+		if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
+			adapter->if_events.TpCsum++;
+		if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
+			adapter->if_events.TpHlen++;
+		if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
+			adapter->if_events.IpCsum++;
+		if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
+			adapter->if_events.IpLen++;
+		if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
+			adapter->if_events.IpHlen++;
+	} else {
+		if (hdr->frame_statusGB & VGBSTAT_XPERR) {
+			u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
+
+			if (xerr == VGBSTAT_XCSERR)
+				adapter->if_events.TpCsum++;
+			if (xerr == VGBSTAT_XUFLOW)
+				adapter->if_events.Tprtoflow++;
+			if (xerr == VGBSTAT_XHLEN)
+				adapter->if_events.TpHlen++;
+		}
+		if (hdr->frame_statusGB & VGBSTAT_NETERR) {
+			u32 nerr =
+			    (hdr->
+			     frame_statusGB >> VGBSTAT_NERRSHFT) &
+			    VGBSTAT_NERRMSK;
+			if (nerr == VGBSTAT_NCSERR)
+				adapter->if_events.IpCsum++;
+			if (nerr == VGBSTAT_NUFLOW)
+				adapter->if_events.IpLen++;
+			if (nerr == VGBSTAT_NHLEN)
+				adapter->if_events.IpHlen++;
+		}
+		if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
+			u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
+
+			if (lerr == VGBSTAT_LDEARLY)
+				adapter->if_events.rcvearly++;
+			if (lerr == VGBSTAT_LBOFLO)
+				adapter->if_events.Bufov++;
+			if (lerr == VGBSTAT_LCODERR)
+				adapter->if_events.Code++;
+			if (lerr == VGBSTAT_LDBLNBL)
+				adapter->if_events.Drbl++;
+			if (lerr == VGBSTAT_LCRCERR)
+				adapter->if_events.Crc++;
+			if (lerr == VGBSTAT_LOFLO)
+				adapter->if_events.oflow802++;
+			if (lerr == VGBSTAT_LUFLO)
+				adapter->if_events.uflow802++;
+		}
+	}
+	return;
+}
+
+#define TCP_OFFLOAD_FRAME_PUSHFLAG  0x10000000
+#define M_FAST_PATH                 0x0040
+
+static void slic_rcv_handler(struct adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct sk_buff *skb;
+	struct slic_rcvbuf *rcvbuf;
+	u32 frames = 0;
+
+	while ((skb = slic_rcvqueue_getnext(adapter))) {
+		u32 rx_bytes;
+
+		ASSERT(skb->head);
+		rcvbuf = (struct slic_rcvbuf *)skb->head;
+		adapter->card->events++;
+		if (rcvbuf->status & IRHDDR_ERR) {
+			adapter->rx_errors++;
+			slic_rcv_handle_error(adapter, rcvbuf);
+			slic_rcvqueue_reinsert(adapter, skb);
+			continue;
+		}
+
+		if (!slic_mac_filter(adapter, (struct ether_header *)
+					rcvbuf->data)) {
+			slic_rcvqueue_reinsert(adapter, skb);
+			continue;
+		}
+		skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
+		rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
+		skb_put(skb, rx_bytes);
+		netdev->stats.rx_packets++;
+		netdev->stats.rx_bytes += rx_bytes;
+#if SLIC_OFFLOAD_IP_CHECKSUM
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+#endif
+
+		skb->dev = adapter->netdev;
+		skb->protocol = eth_type_trans(skb, skb->dev);
+		netif_rx(skb);
+
+		++frames;
+#if SLIC_INTERRUPT_PROCESS_LIMIT
+		if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
+			adapter->rcv_interrupt_yields++;
+			break;
+		}
+#endif
+	}
+	adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
+}
+
+static void slic_xmit_complete(struct adapter *adapter)
+{
+	struct slic_hostcmd *hcmd;
+	struct slic_rspbuf *rspbuf;
+	u32 frames = 0;
+	struct slic_handle_word slic_handle_word;
+
+	do {
+		rspbuf = slic_rspqueue_getnext(adapter);
+		if (!rspbuf)
+			break;
+		adapter->xmit_completes++;
+		adapter->card->events++;
+		/*
+		 Get the complete host command buffer
+		*/
+		slic_handle_word.handle_token = rspbuf->hosthandle;
+		ASSERT(slic_handle_word.handle_index);
+		ASSERT(slic_handle_word.handle_index <= SLIC_CMDQ_MAXCMDS);
+		hcmd =
+		    (struct slic_hostcmd *)
+			adapter->slic_handles[slic_handle_word.handle_index].
+									address;
+/*      hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
+		ASSERT(hcmd);
+		ASSERT(hcmd->pslic_handle ==
+		       &adapter->slic_handles[slic_handle_word.handle_index]);
+		if (hcmd->type == SLIC_CMD_DUMB) {
+			if (hcmd->skb)
+				dev_kfree_skb_irq(hcmd->skb);
+			slic_cmdq_putdone_irq(adapter, hcmd);
+		}
+		rspbuf->status = 0;
+		rspbuf->hosthandle = 0;
+		frames++;
+	} while (1);
+	adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
+}
+
+static irqreturn_t slic_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct adapter *adapter = netdev_priv(dev);
+	u32 isr;
+
+	if ((adapter->pshmem) && (adapter->pshmem->isr)) {
+		slic_reg32_write(&adapter->slic_regs->slic_icr,
+				 ICR_INT_MASK, FLUSH);
+		isr = adapter->isrcopy = adapter->pshmem->isr;
+		adapter->pshmem->isr = 0;
+		adapter->num_isrs++;
+		switch (adapter->card->state) {
+		case CARD_UP:
+			if (isr & ~ISR_IO) {
+				if (isr & ISR_ERR) {
+					adapter->error_interrupts++;
+					if (isr & ISR_RMISS) {
+						int count;
+						int pre_count;
+						int errors;
+
+						struct slic_rcvqueue *rcvq =
+						    &adapter->rcvqueue;
+
+						adapter->
+						    error_rmiss_interrupts++;
+						if (!rcvq->errors)
+							rcv_count = rcvq->count;
+						pre_count = rcvq->count;
+						errors = rcvq->errors;
+
+						while (rcvq->count <
+						       SLIC_RCVQ_FILLTHRESH) {
+							count =
+							    slic_rcvqueue_fill
+							    (adapter);
+							if (!count)
+								break;
+						}
+					} else if (isr & ISR_XDROP) {
+						dev_err(&dev->dev,
+							"isr & ISR_ERR [%x] "
+							"ISR_XDROP \n", isr);
+					} else {
+						dev_err(&dev->dev,
+							"isr & ISR_ERR [%x]\n",
+							isr);
+					}
+				}
+
+				if (isr & ISR_LEVENT) {
+					adapter->linkevent_interrupts++;
+					slic_link_event_handler(adapter);
+				}
+
+				if ((isr & ISR_UPC) ||
+				    (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
+					adapter->upr_interrupts++;
+					slic_upr_request_complete(adapter, isr);
+				}
+			}
+
+			if (isr & ISR_RCV) {
+				adapter->rcv_interrupts++;
+				slic_rcv_handler(adapter);
+			}
+
+			if (isr & ISR_CMD) {
+				adapter->xmit_interrupts++;
+				slic_xmit_complete(adapter);
+			}
+			break;
+
+		case CARD_DOWN:
+			if ((isr & ISR_UPC) ||
+			    (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
+				adapter->upr_interrupts++;
+				slic_upr_request_complete(adapter, isr);
+			}
+			break;
+
+		default:
+			break;
+		}
+
+		adapter->isrcopy = 0;
+		adapter->all_reg_writes += 2;
+		adapter->isr_reg_writes++;
+		slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
+	} else {
+		adapter->false_interrupts++;
+	}
+	return IRQ_HANDLED;
+}
+
+#define NORMAL_ETHFRAME     0
+
+static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sliccard *card;
+	struct adapter *adapter = netdev_priv(dev);
+	struct slic_hostcmd *hcmd = NULL;
+	u32 status = 0;
+	u32 skbtype = NORMAL_ETHFRAME;
+	void *offloadcmd = NULL;
+
+	card = adapter->card;
+	ASSERT(card);
+	if ((adapter->linkstate != LINK_UP) ||
+	    (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
+		status = XMIT_FAIL_LINK_STATE;
+		goto xmit_fail;
+
+	} else if (skb->len == 0) {
+		status = XMIT_FAIL_ZERO_LENGTH;
+		goto xmit_fail;
+	}
+
+	if (skbtype == NORMAL_ETHFRAME) {
+		hcmd = slic_cmdq_getfree(adapter);
+		if (!hcmd) {
+			adapter->xmitq_full = 1;
+			status = XMIT_FAIL_HOSTCMD_FAIL;
+			goto xmit_fail;
+		}
+		ASSERT(hcmd->pslic_handle);
+		ASSERT(hcmd->cmd64.hosthandle ==
+		       hcmd->pslic_handle->token.handle_token);
+		hcmd->skb = skb;
+		hcmd->busy = 1;
+		hcmd->type = SLIC_CMD_DUMB;
+		if (skbtype == NORMAL_ETHFRAME)
+			slic_xmit_build_request(adapter, hcmd, skb);
+	}
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
+
+#ifdef DEBUG_DUMP
+	if (adapter->kill_card) {
+		struct slic_host64_cmd ihcmd;
+
+		ihcmd = &hcmd->cmd64;
+
+		ihcmd->flags |= 0x40;
+		adapter->kill_card = 0;	/* only do this once */
+	}
+#endif
+	if (hcmd->paddrh == 0) {
+		slic_reg32_write(&adapter->slic_regs->slic_cbar,
+				 (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
+	} else {
+		slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
+				 (hcmd->paddrl | hcmd->cmdsize),
+				 &adapter->slic_regs->slic_addr_upper,
+				 hcmd->paddrh, DONT_FLUSH);
+	}
+xmit_done:
+	return NETDEV_TX_OK;
+xmit_fail:
+	slic_xmit_fail(adapter, skb, offloadcmd, skbtype, status);
+	goto xmit_done;
+}
+
+
+static void slic_adapter_freeresources(struct adapter *adapter)
+{
+	slic_init_cleanup(adapter);
+	adapter->error_interrupts = 0;
+	adapter->rcv_interrupts = 0;
+	adapter->xmit_interrupts = 0;
+	adapter->linkevent_interrupts = 0;
+	adapter->upr_interrupts = 0;
+	adapter->num_isrs = 0;
+	adapter->xmit_completes = 0;
+	adapter->rcv_broadcasts = 0;
+	adapter->rcv_multicasts = 0;
+	adapter->rcv_unicasts = 0;
+}
+
+static int slic_adapter_allocresources(struct adapter *adapter)
+{
+	if (!adapter->intrregistered) {
+		int retval;
+
+		spin_unlock_irqrestore(&slic_global.driver_lock.lock,
+					slic_global.driver_lock.flags);
+
+		retval = request_irq(adapter->netdev->irq,
+				     &slic_interrupt,
+				     IRQF_SHARED,
+				     adapter->netdev->name, adapter->netdev);
+
+		spin_lock_irqsave(&slic_global.driver_lock.lock,
+					slic_global.driver_lock.flags);
+
+		if (retval) {
+			dev_err(&adapter->netdev->dev,
+				"request_irq (%s) FAILED [%x]\n",
+				adapter->netdev->name, retval);
+			return retval;
+		}
+		adapter->intrregistered = 1;
+	}
+	return 0;
+}
+
+/*
+ *  slic_if_init
+ *
+ *  Perform initialization of our slic interface.
+ *
+ */
+static int slic_if_init(struct adapter *adapter)
+{
+	struct sliccard *card = adapter->card;
+	struct net_device *dev = adapter->netdev;
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
+	struct slic_shmem *pshmem;
+	int rc;
+
+	ASSERT(card);
+
+	/* adapter should be down at this point */
+	if (adapter->state != ADAPT_DOWN) {
+		dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
+			__func__);
+		rc = -EIO;
+		goto err;
+	}
+	ASSERT(adapter->linkstate == LINK_DOWN);
+
+	adapter->devflags_prev = dev->flags;
+	adapter->macopts = MAC_DIRECTED;
+	if (dev->flags) {
+		if (dev->flags & IFF_BROADCAST)
+			adapter->macopts |= MAC_BCAST;
+		if (dev->flags & IFF_PROMISC)
+			adapter->macopts |= MAC_PROMISC;
+		if (dev->flags & IFF_ALLMULTI)
+			adapter->macopts |= MAC_ALLMCAST;
+		if (dev->flags & IFF_MULTICAST)
+			adapter->macopts |= MAC_MCAST;
+	}
+	rc = slic_adapter_allocresources(adapter);
+	if (rc) {
+		dev_err(&dev->dev,
+			"%s: slic_adapter_allocresources FAILED %x\n",
+			__func__, rc);
+		slic_adapter_freeresources(adapter);
+		goto err;
+	}
+
+	if (!adapter->queues_initialized) {
+		if ((rc = slic_rspqueue_init(adapter)))
+			goto err;
+		if ((rc = slic_cmdq_init(adapter)))
+			goto err;
+		if ((rc = slic_rcvqueue_init(adapter)))
+			goto err;
+		adapter->queues_initialized = 1;
+	}
+
+	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+	mdelay(1);
+
+	if (!adapter->isp_initialized) {
+		pshmem = (struct slic_shmem *)adapter->phys_shmem;
+
+		spin_lock_irqsave(&adapter->bit64reglock.lock,
+					adapter->bit64reglock.flags);
+
+#if defined(CONFIG_X86_64)
+		slic_reg32_write(&slic_regs->slic_addr_upper,
+				 SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
+		slic_reg32_write(&slic_regs->slic_isp,
+				 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+#elif defined(CONFIG_X86)
+		slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+		slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
+#else
+		Stop Compilations
+#endif
+		spin_unlock_irqrestore(&adapter->bit64reglock.lock,
+					adapter->bit64reglock.flags);
+		adapter->isp_initialized = 1;
+	}
+
+	adapter->state = ADAPT_UP;
+	if (!card->loadtimerset) {
+		init_timer(&card->loadtimer);
+		card->loadtimer.expires =
+		    jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
+		card->loadtimer.data = (ulong) card;
+		card->loadtimer.function = &slic_timer_load_check;
+		add_timer(&card->loadtimer);
+
+		card->loadtimerset = 1;
+	}
+
+	if (!adapter->pingtimerset) {
+		init_timer(&adapter->pingtimer);
+		adapter->pingtimer.expires =
+		    jiffies + (PING_TIMER_INTERVAL * HZ);
+		adapter->pingtimer.data = (ulong) dev;
+		adapter->pingtimer.function = &slic_timer_ping;
+		add_timer(&adapter->pingtimer);
+		adapter->pingtimerset = 1;
+		adapter->card->pingstatus = ISR_PINGMASK;
+	}
+
+	/*
+	 *    clear any pending events, then enable interrupts
+	 */
+	adapter->isrcopy = 0;
+	adapter->pshmem->isr = 0;
+	slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
+	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
+
+	slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
+	slic_link_event_handler(adapter);
+
+err:
+	return rc;
+}
+
+static int slic_entry_open(struct net_device *dev)
+{
+	struct adapter *adapter = netdev_priv(dev);
+	struct sliccard *card = adapter->card;
+	u32 locked = 0;
+	int status;
+
+	ASSERT(adapter);
+	ASSERT(card);
+
+	netif_stop_queue(adapter->netdev);
+
+	spin_lock_irqsave(&slic_global.driver_lock.lock,
+				slic_global.driver_lock.flags);
+	locked = 1;
+	if (!adapter->activated) {
+		card->adapters_activated++;
+		slic_global.num_slic_ports_active++;
+		adapter->activated = 1;
+	}
+	status = slic_if_init(adapter);
+
+	if (status != 0) {
+		if (adapter->activated) {
+			card->adapters_activated--;
+			slic_global.num_slic_ports_active--;
+			adapter->activated = 0;
+		}
+		if (locked) {
+			spin_unlock_irqrestore(&slic_global.driver_lock.lock,
+						slic_global.driver_lock.flags);
+			locked = 0;
+		}
+		return status;
+	}
+	if (!card->master)
+		card->master = adapter;
+
+	if (locked) {
+		spin_unlock_irqrestore(&slic_global.driver_lock.lock,
+					slic_global.driver_lock.flags);
+		locked = 0;
+	}
+
+	return 0;
+}
+
+static void slic_card_cleanup(struct sliccard *card)
+{
+	if (card->loadtimerset) {
+		card->loadtimerset = 0;
+		del_timer(&card->loadtimer);
+	}
+
+	slic_debug_card_destroy(card);
+
+	kfree(card);
+}
+
+static void __devexit slic_entry_remove(struct pci_dev *pcidev)
+{
+	struct net_device *dev = pci_get_drvdata(pcidev);
+	u32 mmio_start = 0;
+	uint mmio_len = 0;
+	struct adapter *adapter = netdev_priv(dev);
+	struct sliccard *card;
+	struct mcast_address *mcaddr, *mlist;
+
+	ASSERT(adapter);
+	slic_adapter_freeresources(adapter);
+	slic_unmap_mmio_space(adapter);
+	unregister_netdev(dev);
+
+	mmio_start = pci_resource_start(pcidev, 0);
+	mmio_len = pci_resource_len(pcidev, 0);
+
+	release_mem_region(mmio_start, mmio_len);
+
+	iounmap((void __iomem *)dev->base_addr);
+	/* free multicast addresses */
+	mlist = adapter->mcastaddrs;
+	while (mlist) {
+		mcaddr = mlist;
+		mlist = mlist->next;
+		kfree(mcaddr);
+	}
+	ASSERT(adapter->card);
+	card = adapter->card;
+	ASSERT(card->adapters_allocated);
+	card->adapters_allocated--;
+	adapter->allocated = 0;
+	if (!card->adapters_allocated) {
+		struct sliccard *curr_card = slic_global.slic_card;
+		if (curr_card == card) {
+			slic_global.slic_card = card->next;
+		} else {
+			while (curr_card->next != card)
+				curr_card = curr_card->next;
+			ASSERT(curr_card);
+			curr_card->next = card->next;
+		}
+		ASSERT(slic_global.num_slic_cards);
+		slic_global.num_slic_cards--;
+		slic_card_cleanup(card);
+	}
+	kfree(dev);
+	pci_release_regions(pcidev);
+}
+
+static int slic_entry_halt(struct net_device *dev)
+{
+	struct adapter *adapter = netdev_priv(dev);
+	struct sliccard *card = adapter->card;
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
+
+	spin_lock_irqsave(&slic_global.driver_lock.lock,
+				slic_global.driver_lock.flags);
+	ASSERT(card);
+	netif_stop_queue(adapter->netdev);
+	adapter->state = ADAPT_DOWN;
+	adapter->linkstate = LINK_DOWN;
+	adapter->upr_list = NULL;
+	adapter->upr_busy = 0;
+	adapter->devflags_prev = 0;
+	ASSERT(card->adapter[adapter->cardindex] == adapter);
+	slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+	adapter->all_reg_writes++;
+	adapter->icr_reg_writes++;
+	slic_config_clear(adapter);
+	if (adapter->activated) {
+		card->adapters_activated--;
+		slic_global.num_slic_ports_active--;
+		adapter->activated = 0;
+	}
+#ifdef AUTOMATIC_RESET
+	slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
+#endif
+	/*
+	 *  Reset the adapter's cmd queues
+	 */
+	slic_cmdq_reset(adapter);
+
+#ifdef AUTOMATIC_RESET
+	if (!card->adapters_activated)
+		slic_card_init(card, adapter);
+#endif
+
+	spin_unlock_irqrestore(&slic_global.driver_lock.lock,
+				slic_global.driver_lock.flags);
+	return 0;
+}
+
+static struct net_device_stats *slic_get_stats(struct net_device *dev)
+{
+	struct adapter *adapter = netdev_priv(dev);
+
+	ASSERT(adapter);
+	dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
+	dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
+	dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
+	dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
+	dev->stats.tx_heartbeat_errors = 0;
+	dev->stats.tx_aborted_errors = 0;
+	dev->stats.tx_window_errors = 0;
+	dev->stats.tx_fifo_errors = 0;
+	dev->stats.rx_frame_errors = 0;
+	dev->stats.rx_length_errors = 0;
+
+	return &dev->stats;
+}
+
+static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct adapter *adapter = netdev_priv(dev);
+	struct ethtool_cmd edata;
+	struct ethtool_cmd ecmd;
+	u32 data[7];
+	u32 intagg;
+
+	ASSERT(rq);
+	switch (cmd) {
+	case SIOCSLICSETINTAGG:
+		if (copy_from_user(data, rq->ifr_data, 28))
+			return -EFAULT;
+		intagg = data[0];
+		dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
+			__func__, intagg);
+		slic_intagg_set(adapter, intagg);
+		return 0;
+
+#ifdef SLIC_TRACE_DUMP_ENABLED
+	case SIOCSLICTRACEDUMP:
+		{
+			u32 value;
+			DBG_IOCTL("slic_ioctl  SIOCSLIC_TRACE_DUMP\n");
+
+			if (copy_from_user(data, rq->ifr_data, 28)) {
+				PRINT_ERROR
+				    ("slic: copy_from_user FAILED getting initial simba param\n");
+				return -EFAULT;
+			}
+
+			value = data[0];
+			if (tracemon_request == SLIC_DUMP_DONE) {
+				PRINT_ERROR
+				    ("ATK Diagnostic Trace Dump Requested\n");
+				tracemon_request = SLIC_DUMP_REQUESTED;
+				tracemon_request_type = value;
+				tracemon_timestamp = jiffies;
+			} else if ((tracemon_request == SLIC_DUMP_REQUESTED) ||
+				   (tracemon_request ==
+				    SLIC_DUMP_IN_PROGRESS)) {
+				PRINT_ERROR
+				    ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
+			} else {
+				PRINT_ERROR
+				    ("ATK Diagnostic Trace Dump Requested\n");
+				tracemon_request = SLIC_DUMP_REQUESTED;
+				tracemon_request_type = value;
+				tracemon_timestamp = jiffies;
+			}
+			return 0;
+		}
+#endif
+	case SIOCETHTOOL:
+		ASSERT(adapter);
+		if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
+			return -EFAULT;
+
+		if (ecmd.cmd == ETHTOOL_GSET) {
+			edata.supported = (SUPPORTED_10baseT_Half |
+					   SUPPORTED_10baseT_Full |
+					   SUPPORTED_100baseT_Half |
+					   SUPPORTED_100baseT_Full |
+					   SUPPORTED_Autoneg | SUPPORTED_MII);
+			edata.port = PORT_MII;
+			edata.transceiver = XCVR_INTERNAL;
+			edata.phy_address = 0;
+			if (adapter->linkspeed == LINK_100MB)
+				edata.speed = SPEED_100;
+			else if (adapter->linkspeed == LINK_10MB)
+				edata.speed = SPEED_10;
+			else
+				edata.speed = 0;
+
+			if (adapter->linkduplex == LINK_FULLD)
+				edata.duplex = DUPLEX_FULL;
+			else
+				edata.duplex = DUPLEX_HALF;
+
+			edata.autoneg = AUTONEG_ENABLE;
+			edata.maxtxpkt = 1;
+			edata.maxrxpkt = 1;
+			if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
+				return -EFAULT;
+
+		} else if (ecmd.cmd == ETHTOOL_SSET) {
+			if (!capable(CAP_NET_ADMIN))
+				return -EPERM;
+
+			if (adapter->linkspeed == LINK_100MB)
+				edata.speed = SPEED_100;
+			else if (adapter->linkspeed == LINK_10MB)
+				edata.speed = SPEED_10;
+			else
+				edata.speed = 0;
+
+			if (adapter->linkduplex == LINK_FULLD)
+				edata.duplex = DUPLEX_FULL;
+			else
+				edata.duplex = DUPLEX_HALF;
+
+			edata.autoneg = AUTONEG_ENABLE;
+			edata.maxtxpkt = 1;
+			edata.maxrxpkt = 1;
+			if ((ecmd.speed != edata.speed) ||
+			    (ecmd.duplex != edata.duplex)) {
+				u32 speed;
+				u32 duplex;
+
+				if (ecmd.speed == SPEED_10)
+					speed = 0;
+				else
+					speed = PCR_SPEED_100;
+				if (ecmd.duplex == DUPLEX_FULL)
+					duplex = PCR_DUPLEX_FULL;
+				else
+					duplex = 0;
+				slic_link_config(adapter, speed, duplex);
+				slic_link_event_handler(adapter);
+			}
+		}
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void slic_config_pci(struct pci_dev *pcidev)
+{
+	u16 pci_command;
+	u16 new_command;
+
+	pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
+
+	new_command = pci_command | PCI_COMMAND_MASTER
+	    | PCI_COMMAND_MEMORY
+	    | PCI_COMMAND_INVALIDATE
+	    | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
+	if (pci_command != new_command)
+		pci_write_config_word(pcidev, PCI_COMMAND, new_command);
+}
+
+static int slic_card_init(struct sliccard *card, struct adapter *adapter)
+{
+	__iomem struct slic_regs *slic_regs = adapter->slic_regs;
+	struct slic_eeprom *peeprom;
+	struct oslic_eeprom *pOeeprom;
+	dma_addr_t phys_config;
+	u32 phys_configh;
+	u32 phys_configl;
+	u32 i = 0;
+	struct slic_shmem *pshmem;
+	int status;
+	uint macaddrs = card->card_size;
+	ushort eecodesize;
+	ushort dramsize;
+	ushort ee_chksum;
+	ushort calc_chksum;
+	struct slic_config_mac *pmac;
+	unsigned char fruformat;
+	unsigned char oemfruformat;
+	struct atk_fru *patkfru;
+	union oemfru *poemfru;
+
+	/* Reset everything except PCI configuration space */
+	slic_soft_reset(adapter);
+
+	/* Download the microcode */
+	status = slic_card_download(adapter);
+
+	if (status != 0) {
+		dev_err(&adapter->pcidev->dev,
+			"download failed bus %d slot %d\n",
+			adapter->busnumber, adapter->slotnumber);
+		return status;
+	}
+
+	if (!card->config_set) {
+		peeprom = pci_alloc_consistent(adapter->pcidev,
+					       sizeof(struct slic_eeprom),
+					       &phys_config);
+
+		phys_configl = SLIC_GET_ADDR_LOW(phys_config);
+		phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
+
+		if (!peeprom) {
+			dev_err(&adapter->pcidev->dev,
+				"eeprom read failed to get memory "
+				"bus %d slot %d\n", adapter->busnumber,
+				adapter->slotnumber);
+			return -ENOMEM;
+		} else {
+			memset(peeprom, 0, sizeof(struct slic_eeprom));
+		}
+		slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
+		mdelay(1);
+		pshmem = (struct slic_shmem *)adapter->phys_shmem;
+
+		spin_lock_irqsave(&adapter->bit64reglock.lock,
+					adapter->bit64reglock.flags);
+		slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
+		slic_reg32_write(&slic_regs->slic_isp,
+				 SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
+		spin_unlock_irqrestore(&adapter->bit64reglock.lock,
+					adapter->bit64reglock.flags);
+
+		slic_config_get(adapter, phys_configl, phys_configh);
+
+		for (;;) {
+			if (adapter->pshmem->isr) {
+				if (adapter->pshmem->isr & ISR_UPC) {
+					adapter->pshmem->isr = 0;
+					slic_reg64_write(adapter,
+						&slic_regs->slic_isp, 0,
+						&slic_regs->slic_addr_upper,
+						0, FLUSH);
+					slic_reg32_write(&slic_regs->slic_isr,
+							 0, FLUSH);
+
+					slic_upr_request_complete(adapter, 0);
+					break;
+				} else {
+					adapter->pshmem->isr = 0;
+					slic_reg32_write(&slic_regs->slic_isr,
+							 0, FLUSH);
+				}
+			} else {
+				mdelay(1);
+				i++;
+				if (i > 5000) {
+					dev_err(&adapter->pcidev->dev,
+						"%d config data fetch timed out!\n",
+						adapter->port);
+					slic_reg64_write(adapter,
+						&slic_regs->slic_isp, 0,
+						&slic_regs->slic_addr_upper,
+						0, FLUSH);
+					return -EINVAL;
+				}
+			}
+		}
+
+		switch (adapter->devid) {
+		/* Oasis card */
+		case SLIC_2GB_DEVICE_ID:
+			/* extract EEPROM data and pointers to EEPROM data */
+			pOeeprom = (struct oslic_eeprom *) peeprom;
+			eecodesize = pOeeprom->EecodeSize;
+			dramsize = pOeeprom->DramSize;
+			pmac = pOeeprom->MacInfo;
+			fruformat = pOeeprom->FruFormat;
+			patkfru = &pOeeprom->AtkFru;
+			oemfruformat = pOeeprom->OemFruFormat;
+			poemfru = &pOeeprom->OemFru;
+			macaddrs = 2;
+			/* Minor kludge for Oasis card
+			     get 2 MAC addresses from the
+			     EEPROM to ensure that function 1
+			     gets the Port 1 MAC address */
+			break;
+		default:
+			/* extract EEPROM data and pointers to EEPROM data */
+			eecodesize = peeprom->EecodeSize;
+			dramsize = peeprom->DramSize;
+			pmac = peeprom->u2.mac.MacInfo;
+			fruformat = peeprom->FruFormat;
+			patkfru = &peeprom->AtkFru;
+			oemfruformat = peeprom->OemFruFormat;
+			poemfru = &peeprom->OemFru;
+			break;
+		}
+
+		card->config.EepromValid = false;
+
+		/*  see if the EEPROM is valid by checking it's checksum */
+		if ((eecodesize <= MAX_EECODE_SIZE) &&
+		    (eecodesize >= MIN_EECODE_SIZE)) {
+
+			ee_chksum =
+			    *(u16 *) ((char *) peeprom + (eecodesize - 2));
+			/*
+			    calculate the EEPROM checksum
+			*/
+			calc_chksum =
+			    ~slic_eeprom_cksum((char *) peeprom,
+					       (eecodesize - 2));
+			/*
+			    if the ucdoe chksum flag bit worked,
+			    we wouldn't need this shit
+			*/
+			if (ee_chksum == calc_chksum)
+				card->config.EepromValid = true;
+		}
+		/*  copy in the DRAM size */
+		card->config.DramSize = dramsize;
+
+		/*  copy in the MAC address(es) */
+		for (i = 0; i < macaddrs; i++) {
+			memcpy(&card->config.MacInfo[i],
+			       &pmac[i], sizeof(struct slic_config_mac));
+		}
+
+		/*  copy the Alacritech FRU information */
+		card->config.FruFormat = fruformat;
+		memcpy(&card->config.AtkFru, patkfru,
+						sizeof(struct atk_fru));
+
+		pci_free_consistent(adapter->pcidev,
+				    sizeof(struct slic_eeprom),
+				    peeprom, phys_config);
+
+		if ((!card->config.EepromValid) &&
+		    (adapter->reg_params.fail_on_bad_eeprom)) {
+			slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
+					 &slic_regs->slic_addr_upper,
+					 0, FLUSH);
+			dev_err(&adapter->pcidev->dev,
+				"unsupported CONFIGURATION EEPROM invalid\n");
+			return -EINVAL;
+		}
+
+		card->config_set = 1;
+	}
+
+	if (slic_card_download_gbrcv(adapter)) {
+		dev_err(&adapter->pcidev->dev,
+			"unable to download GB receive microcode\n");
+		return -EINVAL;
+	}
+
+	if (slic_global.dynamic_intagg)
+		slic_intagg_set(adapter, 0);
+	else
+		slic_intagg_set(adapter, intagg_delay);
+
+	/*
+	 *  Initialize ping status to "ok"
+	 */
+	card->pingstatus = ISR_PINGMASK;
+
+	/*
+	 * Lastly, mark our card state as up and return success
+	 */
+	card->state = CARD_UP;
+	card->reset_in_progress = 0;
+
+	return 0;
+}
+
+static void slic_init_driver(void)
+{
+	if (slic_first_init) {
+		slic_first_init = 0;
+		spin_lock_init(&slic_global.driver_lock.lock);
+		slic_debug_init();
+	}
+}
+
+static void slic_init_adapter(struct net_device *netdev,
+			      struct pci_dev *pcidev,
+			      const struct pci_device_id *pci_tbl_entry,
+			      void __iomem *memaddr, int chip_idx)
+{
+	ushort index;
+	struct slic_handle *pslic_handle;
+	struct adapter *adapter = netdev_priv(netdev);
+
+/*	adapter->pcidev = pcidev;*/
+	adapter->vendid = pci_tbl_entry->vendor;
+	adapter->devid = pci_tbl_entry->device;
+	adapter->subsysid = pci_tbl_entry->subdevice;
+	adapter->busnumber = pcidev->bus->number;
+	adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
+	adapter->functionnumber = (pcidev->devfn & 0x7);
+	adapter->memorylength = pci_resource_len(pcidev, 0);
+	adapter->slic_regs = (__iomem struct slic_regs *)memaddr;
+	adapter->irq = pcidev->irq;
+/*	adapter->netdev = netdev;*/
+	adapter->next_netdevice = head_netdevice;
+	head_netdevice = netdev;
+	adapter->chipid = chip_idx;
+	adapter->port = 0;	/*adapter->functionnumber;*/
+	adapter->cardindex = adapter->port;
+	adapter->memorybase = memaddr;
+	spin_lock_init(&adapter->upr_lock.lock);
+	spin_lock_init(&adapter->bit64reglock.lock);
+	spin_lock_init(&adapter->adapter_lock.lock);
+	spin_lock_init(&adapter->reset_lock.lock);
+	spin_lock_init(&adapter->handle_lock.lock);
+
+	adapter->card_size = 1;
+	/*
+	  Initialize slic_handle array
+	*/
+	ASSERT(SLIC_CMDQ_MAXCMDS <= 0xFFFF);
+	/*
+	 Start with 1.  0 is an invalid host handle.
+	*/
+	for (index = 1, pslic_handle = &adapter->slic_handles[1];
+	     index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
+
+		pslic_handle->token.handle_index = index;
+		pslic_handle->type = SLIC_HANDLE_FREE;
+		pslic_handle->next = adapter->pfree_slic_handles;
+		adapter->pfree_slic_handles = pslic_handle;
+	}
+	adapter->pshmem = (struct slic_shmem *)
+					pci_alloc_consistent(adapter->pcidev,
+					sizeof(struct slic_shmem),
+					&adapter->
+					phys_shmem);
+	ASSERT(adapter->pshmem);
+
+	memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
+
+	return;
+}
+
+static const struct net_device_ops slic_netdev_ops = {
+	.ndo_open		= slic_entry_open,
+	.ndo_stop		= slic_entry_halt,
+	.ndo_start_xmit		= slic_xmit_start,
+	.ndo_do_ioctl		= slic_ioctl,
+	.ndo_set_mac_address	= slic_mac_set_address,
+	.ndo_get_stats		= slic_get_stats,
+	.ndo_set_multicast_list	= slic_mcast_set_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+};
+
+static u32 slic_card_locate(struct adapter *adapter)
+{
+	struct sliccard *card = slic_global.slic_card;
+	struct physcard *physcard = slic_global.phys_card;
+	ushort card_hostid;
+	u16 __iomem *hostid_reg;
+	uint i;
+	uint rdhostid_offset = 0;
+
+	switch (adapter->devid) {
+	case SLIC_2GB_DEVICE_ID:
+		rdhostid_offset = SLIC_RDHOSTID_2GB;
+		break;
+	case SLIC_1GB_DEVICE_ID:
+		rdhostid_offset = SLIC_RDHOSTID_1GB;
+		break;
+	default:
+		ASSERT(0);
+		break;
+	}
+
+	hostid_reg =
+	    (u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
+	    rdhostid_offset);
+
+	/* read the 16 bit hostid from SRAM */
+	card_hostid = (ushort) readw(hostid_reg);
+
+	/* Initialize a new card structure if need be */
+	if (card_hostid == SLIC_HOSTID_DEFAULT) {
+		card = kzalloc(sizeof(struct sliccard), GFP_KERNEL);
+		if (card == NULL)
+			return -ENOMEM;
+
+		card->next = slic_global.slic_card;
+		slic_global.slic_card = card;
+		card->busnumber = adapter->busnumber;
+		card->slotnumber = adapter->slotnumber;
+
+		/* Find an available cardnum */
+		for (i = 0; i < SLIC_MAX_CARDS; i++) {
+			if (slic_global.cardnuminuse[i] == 0) {
+				slic_global.cardnuminuse[i] = 1;
+				card->cardnum = i;
+				break;
+			}
+		}
+		slic_global.num_slic_cards++;
+
+		slic_debug_card_create(card);
+	} else {
+		/* Card exists, find the card this adapter belongs to */
+		while (card) {
+			if (card->cardnum == card_hostid)
+				break;
+			card = card->next;
+		}
+	}
+
+	ASSERT(card);
+	if (!card)
+		return -ENXIO;
+	/* Put the adapter in the card's adapter list */
+	ASSERT(card->adapter[adapter->port] == NULL);
+	if (!card->adapter[adapter->port]) {
+		card->adapter[adapter->port] = adapter;
+		adapter->card = card;
+	}
+
+	card->card_size = 1;	/* one port per *logical* card */
+
+	while (physcard) {
+		for (i = 0; i < SLIC_MAX_PORTS; i++) {
+			if (!physcard->adapter[i])
+				continue;
+			else
+				break;
+		}
+		ASSERT(i != SLIC_MAX_PORTS);
+		if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
+			break;
+		physcard = physcard->next;
+	}
+	if (!physcard) {
+		/* no structure allocated for this physical card yet */
+		physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
+		ASSERT(physcard);
+
+		physcard->next = slic_global.phys_card;
+		slic_global.phys_card = physcard;
+		physcard->adapters_allocd = 1;
+	} else {
+		physcard->adapters_allocd++;
+	}
+	/* Note - this is ZERO relative */
+	adapter->physport = physcard->adapters_allocd - 1;
+
+	ASSERT(physcard->adapter[adapter->physport] == NULL);
+	physcard->adapter[adapter->physport] = adapter;
+	adapter->physcard = physcard;
+
+	return 0;
+}
+
+static int __devinit slic_entry_probe(struct pci_dev *pcidev,
+			       const struct pci_device_id *pci_tbl_entry)
+{
+	static int cards_found;
+	static int did_version;
+	int err = -ENODEV;
+	struct net_device *netdev;
+	struct adapter *adapter;
+	void __iomem *memmapped_ioaddr = NULL;
+	u32 status = 0;
+	ulong mmio_start = 0;
+	ulong mmio_len = 0;
+	struct sliccard *card = NULL;
+	int pci_using_dac = 0;
+
+	slic_global.dynamic_intagg = dynamic_intagg;
+
+	err = pci_enable_device(pcidev);
+
+	if (err)
+		return err;
+
+	if (slic_debug > 0 && did_version++ == 0) {
+		printk(KERN_DEBUG "%s\n", slic_banner);
+		printk(KERN_DEBUG "%s\n", slic_proc_version);
+	}
+
+	if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
+		pci_using_dac = 1;
+		if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
+			dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for "
+					"consistent allocations\n");
+			goto err_out_disable_pci;
+		}
+	} else if (pci_set_dma_mask(pcidev, DMA_BIT_MASK(32))) {
+		pci_using_dac = 0;
+		pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
+	} else {
+		dev_err(&pcidev->dev, "no usable DMA configuration\n");
+		goto err_out_disable_pci;
+	}
+
+	err = pci_request_regions(pcidev, DRV_NAME);
+	if (err) {
+		dev_err(&pcidev->dev, "can't obtain PCI resources\n");
+		goto err_out_disable_pci;
+	}
+
+	pci_set_master(pcidev);
+
+	netdev = alloc_etherdev(sizeof(struct adapter));
+	if (!netdev) {
+		err = -ENOMEM;
+		goto err_out_exit_slic_probe;
+	}
+
+	SET_NETDEV_DEV(netdev, &pcidev->dev);
+
+	pci_set_drvdata(pcidev, netdev);
+	adapter = netdev_priv(netdev);
+	adapter->netdev = netdev;
+	adapter->pcidev = pcidev;
+	if (pci_using_dac)
+		netdev->features |= NETIF_F_HIGHDMA;
+
+	mmio_start = pci_resource_start(pcidev, 0);
+	mmio_len = pci_resource_len(pcidev, 0);
+
+
+/*	memmapped_ioaddr =  (u32)ioremap_nocache(mmio_start, mmio_len);*/
+	memmapped_ioaddr = ioremap(mmio_start, mmio_len);
+	if (!memmapped_ioaddr) {
+		dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
+			mmio_len, mmio_start);
+		goto err_out_free_netdev;
+	}
+
+	slic_config_pci(pcidev);
+
+	slic_init_driver();
+
+	slic_init_adapter(netdev,
+			  pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
+
+	status = slic_card_locate(adapter);
+	if (status) {
+		dev_err(&pcidev->dev, "cannot locate card\n");
+		goto err_out_free_mmio_region;
+	}
+
+	card = adapter->card;
+
+	if (!adapter->allocated) {
+		card->adapters_allocated++;
+		adapter->allocated = 1;
+	}
+
+	status = slic_card_init(card, adapter);
+
+	if (status != 0) {
+		card->state = CARD_FAIL;
+		adapter->state = ADAPT_FAIL;
+		adapter->linkstate = LINK_DOWN;
+		dev_err(&pcidev->dev, "FAILED status[%x]\n", status);
+	} else {
+		slic_adapter_set_hwaddr(adapter);
+	}
+
+	netdev->base_addr = (unsigned long)adapter->memorybase;
+	netdev->irq = adapter->irq;
+	netdev->netdev_ops = &slic_netdev_ops;
+
+	slic_debug_adapter_create(adapter);
+
+	strcpy(netdev->name, "eth%d");
+	err = register_netdev(netdev);
+	if (err) {
+		dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
+		goto err_out_unmap;
+	}
+
+	cards_found++;
+
+	return status;
+
+err_out_unmap:
+	iounmap(memmapped_ioaddr);
+err_out_free_mmio_region:
+	release_mem_region(mmio_start, mmio_len);
+err_out_free_netdev:
+	free_netdev(netdev);
+err_out_exit_slic_probe:
+	pci_release_regions(pcidev);
+err_out_disable_pci:
+	pci_disable_device(pcidev);
+	return err;
+}
 
 static struct pci_driver slic_driver = {
 	.name = DRV_NAME,
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index 9ffeb36ddde..f6b401c0ccc 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -835,7 +835,7 @@ __setup("vga=", sm712vga_setup);
  * Original init function changed to probe method to be used by pci_drv
  * process used to detect chips replaced with kernel process in pci_drv
  */
-static int __init smtcfb_pci_probe(struct pci_dev *pdev,
+static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
 				   const struct pci_device_id *ent)
 {
 	struct smtcfb_info *sfb;
diff --git a/drivers/staging/solo6x10/Kconfig b/drivers/staging/solo6x10/Kconfig
new file mode 100644
index 00000000000..d96398c701f
--- /dev/null
+++ b/drivers/staging/solo6x10/Kconfig
@@ -0,0 +1,7 @@
+config SOLO6X10
+	tristate "Softlogic 6x10 MPEG codec cards"
+	depends on PCI && VIDEO_DEV && SND
+	select VIDEOBUF_DMA_CONTIG
+	---help---
+	  This driver supports the Softlogic based MPEG-4 and h.264 codec
+	  codec cards.
diff --git a/drivers/staging/solo6x10/Makefile b/drivers/staging/solo6x10/Makefile
new file mode 100644
index 00000000000..7e70044d8da
--- /dev/null
+++ b/drivers/staging/solo6x10/Makefile
@@ -0,0 +1,6 @@
+solo6x10-objs	:= solo6010-core.o solo6010-i2c.o solo6010-p2m.o \
+		   solo6010-v4l2.o solo6010-tw28.o solo6010-gpio.o \
+		   solo6010-disp.o solo6010-enc.o solo6010-v4l2-enc.o \
+		   solo6010-g723.o
+
+obj-$(CONFIG_SOLO6X10) := solo6x10.o
diff --git a/drivers/staging/solo6x10/TODO b/drivers/staging/solo6x10/TODO
new file mode 100644
index 00000000000..e6a2ee22674
--- /dev/null
+++ b/drivers/staging/solo6x10/TODO
@@ -0,0 +1,28 @@
+TODO (staging => main):
+
+	* checkpatch.pl (haven't run it yet)
+	* Lindent (should be clean, but check)
+	* Motion detection flags need to be moved to v4l2
+	* Some private CIDs need to be moved to v4l2
+
+TODO (general):
+
+	* encoder on/off controls
+	* mpeg cid bitrate mode (vbr/cbr)
+	* mpeg cid bitrate/bitrate-peak
+	* mpeg encode of user data
+	* mpeg decode of user data
+	* switch between 4 frames/irq to 1 when using mjpeg (and then back
+	  when not)
+	* implement a CID control for motion areas/thresholds
+	* implement CID controls for mozaic areas
+	* allow for higher level of interval (for < 1 fps)
+	* sound:
+	  - implement playback via external sound jack
+	  - implement loopback of external sound jack with incoming audio?
+	  - implement pause/resume
+	  - check into jacking sound from tx28xx chips directly (to avoid
+	    g.723/8khz limitations)
+
+Plase send patches to Greg Kroah-Hartman <greg@kroah.com> and Cc Ben Collins
+<bcollins@bluecherry.net>
diff --git a/drivers/staging/solo6x10/solo6010-core.c b/drivers/staging/solo6x10/solo6010-core.c
new file mode 100644
index 00000000000..98c6739fc19
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-core.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/videodev2.h>
+
+#include "solo6010.h"
+#include "solo6010-tw28.h"
+
+MODULE_DESCRIPTION("Softlogic 6010 MP4 Encoder/Decoder V4L2/ALSA Driver");
+MODULE_AUTHOR("Ben Collins <bcollins@bluecherry.net>");
+MODULE_VERSION(SOLO6010_VERSION);
+MODULE_LICENSE("GPL");
+
+void solo6010_irq_on(struct solo6010_dev *solo_dev, u32 mask)
+{
+	solo_dev->irq_mask |= mask;
+	solo_reg_write(solo_dev, SOLO_IRQ_ENABLE, solo_dev->irq_mask);
+}
+
+void solo6010_irq_off(struct solo6010_dev *solo_dev, u32 mask)
+{
+	solo_dev->irq_mask &= ~mask;
+	solo_reg_write(solo_dev, SOLO_IRQ_ENABLE, solo_dev->irq_mask);
+}
+
+/* XXX We should check the return value of the sub-device ISR's */
+static irqreturn_t solo6010_isr(int irq, void *data)
+{
+	struct solo6010_dev *solo_dev = data;
+	u32 status;
+	int i;
+
+	status = solo_reg_read(solo_dev, SOLO_IRQ_STAT);
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & ~solo_dev->irq_mask) {
+		solo_reg_write(solo_dev, SOLO_IRQ_STAT,
+			       status & ~solo_dev->irq_mask);
+		status &= solo_dev->irq_mask;
+	}
+
+	if (status & SOLO_IRQ_PCI_ERR) {
+		u32 err = solo_reg_read(solo_dev, SOLO_PCI_ERR);
+		solo_p2m_error_isr(solo_dev, err);
+		solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_PCI_ERR);
+	}
+
+	for (i = 0; i < SOLO_NR_P2M; i++)
+		if (status & SOLO_IRQ_P2M(i))
+			solo_p2m_isr(solo_dev, i);
+
+	if (status & SOLO_IRQ_IIC)
+		solo_i2c_isr(solo_dev);
+
+	if (status & SOLO_IRQ_VIDEO_IN)
+		solo_video_in_isr(solo_dev);
+
+	/* Call this first so enc gets detected flag set */
+	if (status & SOLO_IRQ_MOTION)
+		solo_motion_isr(solo_dev);
+
+	if (status & SOLO_IRQ_ENCODER)
+		solo_enc_v4l2_isr(solo_dev);
+
+	if (status & SOLO_IRQ_G723)
+		solo_g723_isr(solo_dev);
+
+	return IRQ_HANDLED;
+}
+
+static void free_solo_dev(struct solo6010_dev *solo_dev)
+{
+	struct pci_dev *pdev;
+
+	if (!solo_dev)
+		return;
+
+	pdev = solo_dev->pdev;
+
+	/* If we never initialized the PCI device, then nothing else
+	 * below here needs cleanup */
+	if (!pdev) {
+		kfree(solo_dev);
+		return;
+	}
+
+	/* Bring down the sub-devices first */
+	solo_g723_exit(solo_dev);
+	solo_enc_v4l2_exit(solo_dev);
+	solo_enc_exit(solo_dev);
+	solo_v4l2_exit(solo_dev);
+	solo_disp_exit(solo_dev);
+	solo_gpio_exit(solo_dev);
+	solo_p2m_exit(solo_dev);
+	solo_i2c_exit(solo_dev);
+
+	/* Now cleanup the PCI device */
+	if (solo_dev->reg_base) {
+		solo6010_irq_off(solo_dev, ~0);
+		pci_iounmap(pdev, solo_dev->reg_base);
+		free_irq(pdev->irq, solo_dev);
+	}
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	kfree(solo_dev);
+}
+
+static int __devinit solo6010_pci_probe(struct pci_dev *pdev,
+					const struct pci_device_id *id)
+{
+	struct solo6010_dev *solo_dev;
+	int ret;
+	int sdram;
+	u8 chip_id;
+
+	if ((solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL)) == NULL)
+		return -ENOMEM;
+
+	solo_dev->pdev = pdev;
+	spin_lock_init(&solo_dev->reg_io_lock);
+	pci_set_drvdata(pdev, solo_dev);
+
+	if ((ret = pci_enable_device(pdev)))
+		goto fail_probe;
+
+	pci_set_master(pdev);
+
+	if ((ret = pci_request_regions(pdev, SOLO6010_NAME)))
+		goto fail_probe;
+
+	if ((solo_dev->reg_base = pci_ioremap_bar(pdev, 0)) == NULL) {
+		ret = -ENOMEM;
+		goto fail_probe;
+	}
+
+	chip_id = solo_reg_read(solo_dev, SOLO_CHIP_OPTION) &
+					SOLO_CHIP_ID_MASK;
+	switch (chip_id) {
+		case 7:
+			solo_dev->nr_chans = 16;
+			solo_dev->nr_ext = 5;
+			break;
+		case 6:
+			solo_dev->nr_chans = 8;
+			solo_dev->nr_ext = 2;
+			break;
+		default:
+			dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, "
+				 "defaulting to 4 channels\n",
+				 chip_id);
+		case 5:
+			solo_dev->nr_chans = 4;
+			solo_dev->nr_ext = 1;
+	}
+
+	/* Disable all interrupts to start */
+	solo6010_irq_off(solo_dev, ~0);
+
+	/* Initial global settings */
+	solo_reg_write(solo_dev, SOLO_SYS_CFG, SOLO_SYS_CFG_SDRAM64BIT |
+		       SOLO_SYS_CFG_INPUTDIV(25) |
+		       SOLO_SYS_CFG_FEEDBACKDIV((SOLO_CLOCK_MHZ * 2) - 2) |
+		       SOLO_SYS_CFG_OUTDIV(3));
+	solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM, SOLO_CLOCK_MHZ - 1);
+
+	/* PLL locking time of 1ms */
+	mdelay(1);
+
+	ret = request_irq(pdev->irq, solo6010_isr, IRQF_SHARED, SOLO6010_NAME,
+			  solo_dev);
+	if (ret)
+		goto fail_probe;
+
+	/* Handle this from the start */
+	solo6010_irq_on(solo_dev, SOLO_IRQ_PCI_ERR);
+
+	if ((ret = solo_i2c_init(solo_dev)))
+		goto fail_probe;
+
+	/* Setup the DMA engine */
+	sdram = (solo_dev->nr_chans >= 8) ? 2 : 1;
+	solo_reg_write(solo_dev, SOLO_DMA_CTRL,
+		       SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
+		       SOLO_DMA_CTRL_SDRAM_SIZE(sdram) |
+		       SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
+		       SOLO_DMA_CTRL_READ_CLK_SELECT |
+		       SOLO_DMA_CTRL_LATENCY(1));
+
+	if ((ret = solo_p2m_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_disp_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_gpio_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_tw28_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_v4l2_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_enc_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_enc_v4l2_init(solo_dev)))
+		goto fail_probe;
+
+	if ((ret = solo_g723_init(solo_dev)))
+		goto fail_probe;
+
+	return 0;
+
+fail_probe:
+	free_solo_dev(solo_dev);
+	return ret;
+}
+
+static void __devexit solo6010_pci_remove(struct pci_dev *pdev)
+{
+	struct solo6010_dev *solo_dev = pci_get_drvdata(pdev);
+
+	free_solo_dev(solo_dev);
+}
+
+static struct pci_device_id solo6010_id_table[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_COMMSOLO_4)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_COMMSOLO_9)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_COMMSOLO_16)},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, solo6010_id_table);
+
+static struct pci_driver solo6010_pci_driver = {
+	.name = SOLO6010_NAME,
+	.id_table = solo6010_id_table,
+	.probe = solo6010_pci_probe,
+	.remove = solo6010_pci_remove,
+};
+
+static int __init solo6010_module_init(void)
+{
+	return pci_register_driver(&solo6010_pci_driver);
+}
+
+static void __exit solo6010_module_exit(void)
+{
+	pci_unregister_driver(&solo6010_pci_driver);
+}
+
+module_init(solo6010_module_init);
+module_exit(solo6010_module_exit);
diff --git a/drivers/staging/solo6x10/solo6010-disp.c b/drivers/staging/solo6x10/solo6010-disp.c
new file mode 100644
index 00000000000..555f024f72e
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-disp.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
+
+#include "solo6010.h"
+
+#define SOLO_VCLK_DELAY			3
+#define SOLO_PROGRESSIVE_VSIZE		1024
+
+#define SOLO_MOT_THRESH_W		64
+#define SOLO_MOT_THRESH_H		64
+#define SOLO_MOT_THRESH_SIZE		8192
+#define SOLO_MOT_THRESH_REAL		(SOLO_MOT_THRESH_W * SOLO_MOT_THRESH_H)
+#define SOLO_MOT_FLAG_SIZE		512
+#define SOLO_MOT_FLAG_AREA		(SOLO_MOT_FLAG_SIZE * 32)
+
+static unsigned video_type;
+module_param(video_type, uint, 0644);
+MODULE_PARM_DESC(video_type, "video_type (0 = NTSC/Default, 1 = PAL)");
+
+static void solo_vin_config(struct solo6010_dev *solo_dev)
+{
+	solo_dev->vin_hstart = 8;
+	solo_dev->vin_vstart = 2;
+
+	solo_reg_write(solo_dev, SOLO_SYS_VCLK,
+		       SOLO_VCLK_SELECT(2) |
+		       SOLO_VCLK_VIN1415_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN1213_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN1011_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN0809_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN0607_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN0405_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN0203_DELAY(SOLO_VCLK_DELAY) |
+		       SOLO_VCLK_VIN0001_DELAY(SOLO_VCLK_DELAY));
+
+	solo_reg_write(solo_dev, SOLO_VI_ACT_I_P,
+		       SOLO_VI_H_START(solo_dev->vin_hstart) |
+		       SOLO_VI_V_START(solo_dev->vin_vstart) |
+		       SOLO_VI_V_STOP(solo_dev->vin_vstart +
+				      solo_dev->video_vsize));
+
+	solo_reg_write(solo_dev, SOLO_VI_ACT_I_S,
+		       SOLO_VI_H_START(solo_dev->vout_hstart) |
+		       SOLO_VI_V_START(solo_dev->vout_vstart) |
+		       SOLO_VI_V_STOP(solo_dev->vout_vstart +
+				      solo_dev->video_vsize));
+
+	solo_reg_write(solo_dev, SOLO_VI_ACT_P,
+		       SOLO_VI_H_START(0) |
+		       SOLO_VI_V_START(1) |
+		       SOLO_VI_V_STOP(SOLO_PROGRESSIVE_VSIZE));
+
+	solo_reg_write(solo_dev, SOLO_VI_CH_FORMAT,
+		       SOLO_VI_FD_SEL_MASK(0) | SOLO_VI_PROG_MASK(0));
+
+	solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 0);
+	solo_reg_write(solo_dev, SOLO_VI_PAGE_SW, 2);
+
+	if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+		solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
+			       SOLO_VI_PB_USER_MODE);
+		solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
+			       SOLO_VI_PB_HSIZE(858) | SOLO_VI_PB_VSIZE(246));
+		solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
+			       SOLO_VI_PB_VSTART(4) |
+			       SOLO_VI_PB_VSTOP(4 + 240));
+	} else {
+		solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
+			       SOLO_VI_PB_USER_MODE | SOLO_VI_PB_PAL);
+		solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
+			       SOLO_VI_PB_HSIZE(864) | SOLO_VI_PB_VSIZE(294));
+		solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
+			       SOLO_VI_PB_VSTART(4) |
+			       SOLO_VI_PB_VSTOP(4 + 288));
+	}
+	solo_reg_write(solo_dev, SOLO_VI_PB_ACT_H, SOLO_VI_PB_HSTART(16) |
+		       SOLO_VI_PB_HSTOP(16 + 720));
+}
+
+static void solo_disp_config(struct solo6010_dev *solo_dev)
+{
+	solo_dev->vout_hstart = 6;
+	solo_dev->vout_vstart = 8;
+
+	solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_COLOR,
+		       (0xa0 << 24) | (0x88 << 16) | (0xa0 << 8) | 0x88);
+	solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_COLOR,
+		       (0x10 << 24) | (0x8f << 16) | (0x10 << 8) | 0x8f);
+	solo_reg_write(solo_dev, SOLO_VO_BKG_COLOR,
+		       (16 << 24) | (128 << 16) | (16 << 8) | 128);
+
+	solo_reg_write(solo_dev, SOLO_VO_FMT_ENC,
+		       solo_dev->video_type |
+		       SOLO_VO_USER_COLOR_SET_NAV |
+		       SOLO_VO_NA_COLOR_Y(0) |
+		       SOLO_VO_NA_COLOR_CB(0) |
+		       SOLO_VO_NA_COLOR_CR(0));
+
+	solo_reg_write(solo_dev, SOLO_VO_ACT_H,
+		       SOLO_VO_H_START(solo_dev->vout_hstart) |
+		       SOLO_VO_H_STOP(solo_dev->vout_hstart +
+				      solo_dev->video_hsize));
+
+	solo_reg_write(solo_dev, SOLO_VO_ACT_V,
+		       SOLO_VO_V_START(solo_dev->vout_vstart) |
+		       SOLO_VO_V_STOP(solo_dev->vout_vstart +
+				      solo_dev->video_vsize));
+
+	solo_reg_write(solo_dev, SOLO_VO_RANGE_HV,
+		       SOLO_VO_H_LEN(solo_dev->video_hsize) |
+		       SOLO_VO_V_LEN(solo_dev->video_vsize));
+
+	solo_reg_write(solo_dev, SOLO_VI_WIN_SW, 5);
+
+	solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, SOLO_VO_DISP_ON |
+		       SOLO_VO_DISP_ERASE_COUNT(8) |
+		       SOLO_VO_DISP_BASE(SOLO_DISP_EXT_ADDR(solo_dev)));
+
+	solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
+
+	/* Enable channels we support */
+	solo_reg_write(solo_dev, SOLO_VI_CH_ENA, (1 << solo_dev->nr_chans) - 1);
+
+	/* Disable the watchdog */
+	solo_reg_write(solo_dev, SOLO_WATCHDOG, 0);
+}
+
+static int solo_dma_vin_region(struct solo6010_dev *solo_dev, u32 off,
+			       u16 val, int reg_size)
+{
+	u16 buf[64];
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < sizeof(buf) >> 1; i++)
+		buf[i] = val;
+
+	for (i = 0; i < reg_size; i += sizeof(buf))
+		ret |= solo_p2m_dma(solo_dev, SOLO_P2M_DMA_ID_VIN, 1, buf,
+				    SOLO_MOTION_EXT_ADDR(solo_dev) + off + i,
+				    sizeof(buf));
+
+	return ret;
+}
+
+void solo_set_motion_threshold(struct solo6010_dev *solo_dev, u8 ch, u16 val)
+{
+	if (ch > solo_dev->nr_chans)
+		return;
+
+	solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
+			    (ch * SOLO_MOT_THRESH_SIZE * 2),
+			    val, SOLO_MOT_THRESH_REAL);
+}
+
+/* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k
+ * threshold and working table for each channel. Atleast that's what the
+ * spec says. However, this code (take from rdk) has some mystery 8k
+ * block right after the flag area, before the first thresh table. */
+static void solo_motion_config(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		/* Clear motion flag area */
+		solo_dma_vin_region(solo_dev, i * SOLO_MOT_FLAG_SIZE, 0x0000,
+				    SOLO_MOT_FLAG_SIZE);
+
+		/* Clear working cache table */
+		solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
+				    SOLO_MOT_THRESH_SIZE +
+				    (i * SOLO_MOT_THRESH_SIZE * 2),
+				    0x0000, SOLO_MOT_THRESH_REAL);
+
+		/* Set default threshold table */
+		solo_set_motion_threshold(solo_dev, i, SOLO_DEF_MOT_THRESH);
+	}
+
+	/* Default motion settings */
+        solo_reg_write(solo_dev, SOLO_VI_MOT_ADR, SOLO_VI_MOTION_EN(0) |
+		       (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
+	solo_reg_write(solo_dev, SOLO_VI_MOT_CTRL,
+		       SOLO_VI_MOTION_FRAME_COUNT(3) |
+		       SOLO_VI_MOTION_SAMPLE_LENGTH(solo_dev->video_hsize / 16)
+		       | //SOLO_VI_MOTION_INTR_START_STOP |
+		       SOLO_VI_MOTION_SAMPLE_COUNT(10));
+
+	solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
+	solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
+}
+
+int solo_disp_init(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	solo_dev->video_hsize = 704;
+	if (video_type == 0) {
+		solo_dev->video_type = SOLO_VO_FMT_TYPE_NTSC;
+		solo_dev->video_vsize = 240;
+		solo_dev->fps = 30;
+	} else {
+		solo_dev->video_type = SOLO_VO_FMT_TYPE_PAL;
+		solo_dev->video_vsize = 288;
+		solo_dev->fps = 25;
+	}
+
+	solo_vin_config(solo_dev);
+	solo_motion_config(solo_dev);
+	solo_disp_config(solo_dev);
+
+	for (i = 0; i < solo_dev->nr_chans; i++)
+		solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 1);
+
+	return 0;
+}
+
+void solo_disp_exit(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	solo6010_irq_off(solo_dev, SOLO_IRQ_MOTION);
+
+	solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, 0);
+	solo_reg_write(solo_dev, SOLO_VO_ZOOM_CTRL, 0);
+	solo_reg_write(solo_dev, SOLO_VO_FREEZE_CTRL, 0);
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(i), 0);
+		solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(i), 0);
+		solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 0);
+	}
+
+	/* Set default border */
+	for (i = 0; i < 5; i++)
+		solo_reg_write(solo_dev, SOLO_VO_BORDER_X(i), 0);
+
+	for (i = 0; i < 5; i++)
+		solo_reg_write(solo_dev, SOLO_VO_BORDER_Y(i), 0);
+
+	solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_MASK, 0);
+	solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_MASK, 0);
+
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(0), 0);
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(0), 0);
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(0), 0);
+	
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(1), 0);
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(1), 0);
+	solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(1), 0);
+}
diff --git a/drivers/staging/solo6x10/solo6010-enc.c b/drivers/staging/solo6x10/solo6010-enc.c
new file mode 100644
index 00000000000..a6cf0a8a3f2
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-enc.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+
+#include "solo6010.h"
+#include "solo6010-osd-font.h"
+
+#define CAPTURE_MAX_BANDWIDTH		32	// D1 4channel (D1 == 4)
+#define OSG_BUFFER_SIZE			1024
+
+#define VI_PROG_HSIZE			(1280 - 16)
+#define VI_PROG_VSIZE			(1024 - 16)
+
+static void solo_capture_config(struct solo6010_dev *solo_dev)
+{
+	int i, j;
+	unsigned long height;
+	unsigned long width;
+	unsigned char *buf;
+
+	solo_reg_write(solo_dev, SOLO_CAP_BASE,
+		       SOLO_CAP_MAX_PAGE(SOLO_CAP_EXT_MAX_PAGE *
+					 solo_dev->nr_chans) |
+		       SOLO_CAP_BASE_ADDR(SOLO_CAP_EXT_ADDR(solo_dev) >> 16));
+	solo_reg_write(solo_dev, SOLO_CAP_BTW,
+		       (1 << 17) | SOLO_CAP_PROG_BANDWIDTH(2) |
+		       SOLO_CAP_MAX_BANDWIDTH(CAPTURE_MAX_BANDWIDTH));
+
+	/* Set scale 1, 9 dimension */
+	width = solo_dev->video_hsize;
+	height = solo_dev->video_vsize;
+	solo_reg_write(solo_dev, SOLO_DIM_SCALE1,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Set scale 2, 10 dimension */
+	width = solo_dev->video_hsize / 2;
+	height = solo_dev->video_vsize;
+	solo_reg_write(solo_dev, SOLO_DIM_SCALE2,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Set scale 3, 11 dimension */
+	width = solo_dev->video_hsize / 2;
+	height = solo_dev->video_vsize / 2;
+	solo_reg_write(solo_dev, SOLO_DIM_SCALE3,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Set scale 4, 12 dimension */
+	width = solo_dev->video_hsize / 3;
+	height = solo_dev->video_vsize / 3;
+	solo_reg_write(solo_dev, SOLO_DIM_SCALE4,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Set scale 5, 13 dimension */
+	width = solo_dev->video_hsize / 4;
+	height = solo_dev->video_vsize / 2;
+	solo_reg_write(solo_dev, SOLO_DIM_SCALE5,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Progressive */
+	width = VI_PROG_HSIZE;
+	height = VI_PROG_VSIZE;
+	solo_reg_write(solo_dev, SOLO_DIM_PROG,
+		       SOLO_DIM_H_MB_NUM(width / 16) |
+		       SOLO_DIM_V_MB_NUM_FRAME(height / 16) |
+		       SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+	/* Clear OSD */
+	solo_reg_write(solo_dev, SOLO_VE_OSD_CH, 0);
+	solo_reg_write(solo_dev, SOLO_VE_OSD_BASE,
+		       SOLO_EOSD_EXT_ADDR(solo_dev) >> 16);
+	solo_reg_write(solo_dev, SOLO_VE_OSD_CLR,
+		       0xF0 << 16 | 0x80 << 8 | 0x80);
+	solo_reg_write(solo_dev, SOLO_VE_OSD_OPT, 0);
+
+	/* Clear OSG buffer */
+	buf = kzalloc(OSG_BUFFER_SIZE, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		for (j = 0; j < SOLO_EOSD_EXT_SIZE; j += OSG_BUFFER_SIZE) {
+			solo_p2m_dma(solo_dev, SOLO_P2M_DMA_ID_MP4E, 1, buf,
+				     SOLO_EOSD_EXT_ADDR(solo_dev) +
+				     (i * SOLO_EOSD_EXT_SIZE) + j,
+				     OSG_BUFFER_SIZE);
+		}
+	}
+	kfree(buf);
+}
+
+int solo_osd_print(struct solo_enc_dev *solo_enc)
+{
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	char *str = solo_enc->osd_text;
+	u8 *buf;
+	u32 reg = solo_reg_read(solo_dev, SOLO_VE_OSD_CH);
+	int len = strlen(str);
+	int i, j;
+	int x = 1, y = 1;
+
+	if (len == 0) {
+		reg &= ~(1 << solo_enc->ch);
+		solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
+		return 0;
+	}
+
+	buf = kzalloc(SOLO_EOSD_EXT_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (i = 0; i < len; i++) {
+		for (j = 0; j < 16; j++) {
+			buf[(j*2) + (i%2) + ((x + (i/2)) * 32) + (y * 2048)] =
+				(solo_osd_font[(str[i] * 4) + (j / 4)]
+					>> ((3 - (j % 4)) * 8)) & 0xff;
+		}
+	}
+
+	solo_p2m_dma(solo_dev, 0, 1, buf, SOLO_EOSD_EXT_ADDR(solo_dev) +
+		     (solo_enc->ch * SOLO_EOSD_EXT_SIZE), SOLO_EOSD_EXT_SIZE);
+        reg |= (1 << solo_enc->ch);
+        solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
+
+	kfree(buf);
+
+	return 0;
+}
+
+static void solo_jpeg_config(struct solo6010_dev *solo_dev)
+{
+	solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL,
+		       (2 << 24) | (2 << 16) | (2 << 8) | (2 << 0));
+	solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_L, 0);
+	solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_H, 0);
+	solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG,
+		(SOLO_JPEG_EXT_SIZE(solo_dev) & 0xffff0000) |
+		((SOLO_JPEG_EXT_ADDR(solo_dev) >> 16) & 0x0000ffff));
+	solo_reg_write(solo_dev, SOLO_VE_JPEG_CTRL, 0xffffffff);
+}
+
+static void solo_mp4e_config(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	/* We can only use VE_INTR_CTRL(0) if we want to support mjpeg */
+	solo_reg_write(solo_dev, SOLO_VE_CFG0,
+		       SOLO_VE_INTR_CTRL(0) |
+		       SOLO_VE_BLOCK_SIZE(SOLO_MP4E_EXT_SIZE(solo_dev) >> 16) |
+		       SOLO_VE_BLOCK_BASE(SOLO_MP4E_EXT_ADDR(solo_dev) >> 16));
+
+	solo_reg_write(solo_dev, SOLO_VE_CFG1,
+		       SOLO_VE_BYTE_ALIGN(2) |
+		       SOLO_VE_INSERT_INDEX | SOLO_VE_MOTION_MODE(0));
+
+	solo_reg_write(solo_dev, SOLO_VE_WMRK_POLY, 0);
+	solo_reg_write(solo_dev, SOLO_VE_VMRK_INIT_KEY, 0);
+	solo_reg_write(solo_dev, SOLO_VE_WMRK_STRL, 0);
+	solo_reg_write(solo_dev, SOLO_VE_ENCRYP_POLY, 0);
+	solo_reg_write(solo_dev, SOLO_VE_ENCRYP_INIT, 0);
+
+	solo_reg_write(solo_dev, SOLO_VE_ATTR,
+		       SOLO_VE_LITTLE_ENDIAN |
+		       SOLO_COMP_ATTR_FCODE(1) |
+		       SOLO_COMP_TIME_INC(0) |
+		       SOLO_COMP_TIME_WIDTH(15) |
+		       SOLO_DCT_INTERVAL(36 / 4));
+
+	for (i = 0; i < solo_dev->nr_chans; i++)
+		solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE(i),
+			       (SOLO_EREF_EXT_ADDR(solo_dev) +
+			       (i * SOLO_EREF_EXT_SIZE)) >> 16);
+}
+
+int solo_enc_init(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	solo_capture_config(solo_dev);
+	solo_mp4e_config(solo_dev);
+	solo_jpeg_config(solo_dev);
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
+		solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
+	}
+
+	solo6010_irq_on(solo_dev, SOLO_IRQ_ENCODER);
+
+	return 0;
+}
+
+void solo_enc_exit(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	solo6010_irq_off(solo_dev, SOLO_IRQ_ENCODER);
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
+		solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
+	}
+}
diff --git a/drivers/staging/solo6x10/solo6010-g723.c b/drivers/staging/solo6x10/solo6010-g723.c
new file mode 100644
index 00000000000..e82846c1d6c
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-g723.c
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mempool.h>
+#include <linux/poll.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+
+#include "solo6010.h"
+#include "solo6010-tw28.h"
+
+#define G723_INTR_ORDER		0
+#define G723_FDMA_PAGES		32
+#define G723_PERIOD_BYTES	48
+#define G723_PERIOD_BLOCK	1024
+#define G723_FRAMES_PER_PAGE	48
+
+/* Sets up channels 16-19 for decoding and 0-15 for encoding */
+#define OUTMODE_MASK		0x300
+
+#define SAMPLERATE		8000
+#define BITRATE			25
+
+/* The solo writes to 1k byte pages, 32 pages, in the dma. Each 1k page
+ * is broken down to 20 * 48 byte regions (one for each channel possible)
+ * with the rest of the page being dummy data. */
+#define MAX_BUFFER		(G723_PERIOD_BYTES * PERIODS_MAX)
+#define IRQ_PAGES		4 // 0 - 4
+#define PERIODS_MIN		(1 << IRQ_PAGES)
+#define PERIODS_MAX		G723_FDMA_PAGES
+
+struct solo_snd_pcm {
+	int				on;
+	spinlock_t			lock;
+	struct solo6010_dev		*solo_dev;
+	unsigned char			g723_buf[G723_PERIOD_BYTES];
+};
+
+static void solo_g723_config(struct solo6010_dev *solo_dev)
+{
+	int clk_div;
+
+	clk_div = SOLO_CLOCK_MHZ / (SAMPLERATE * (BITRATE * 2) * 2);
+
+	solo_reg_write(solo_dev, SOLO_AUDIO_SAMPLE,
+		       SOLO_AUDIO_BITRATE(BITRATE) |
+		       SOLO_AUDIO_CLK_DIV(clk_div));
+
+	solo_reg_write(solo_dev, SOLO_AUDIO_FDMA_INTR,
+		      SOLO_AUDIO_FDMA_INTERVAL(IRQ_PAGES) |
+		      SOLO_AUDIO_INTR_ORDER(G723_INTR_ORDER) |
+		      SOLO_AUDIO_FDMA_BASE(SOLO_G723_EXT_ADDR(solo_dev) >> 16));
+
+	solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL,
+		       SOLO_AUDIO_ENABLE | SOLO_AUDIO_I2S_MODE |
+		       SOLO_AUDIO_I2S_MULTI(3) | SOLO_AUDIO_MODE(OUTMODE_MASK));
+}
+
+void solo_g723_isr(struct solo6010_dev *solo_dev)
+{
+	struct snd_pcm_str *pstr =
+		&solo_dev->snd_pcm->streams[SNDRV_PCM_STREAM_CAPTURE];
+	struct snd_pcm_substream *ss;
+	struct solo_snd_pcm *solo_pcm;
+
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_G723);
+
+	for (ss = pstr->substream; ss != NULL; ss = ss->next) {
+		if (snd_pcm_substream_chip(ss) == NULL)
+			continue;
+
+		/* This means open() hasn't been called on this one */
+		if (snd_pcm_substream_chip(ss) == solo_dev)
+			continue;
+
+		/* Haven't triggered a start yet */
+		solo_pcm = snd_pcm_substream_chip(ss);
+		if (!solo_pcm->on)
+			continue;
+
+		snd_pcm_period_elapsed(ss);
+	}
+}
+
+static int snd_solo_hw_params(struct snd_pcm_substream *ss,
+			      struct snd_pcm_hw_params *hw_params)
+{
+	return snd_pcm_lib_malloc_pages(ss, params_buffer_bytes(hw_params));
+}
+
+static int snd_solo_hw_free(struct snd_pcm_substream *ss)
+{
+	return snd_pcm_lib_free_pages(ss);
+}
+
+static struct snd_pcm_hardware snd_solo_pcm_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+				   SNDRV_PCM_INFO_INTERLEAVED |
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				   SNDRV_PCM_INFO_MMAP_VALID),
+	.formats		= SNDRV_PCM_FMTBIT_U8,
+	.rates			= SNDRV_PCM_RATE_8000,
+	.rate_min		= 8000,
+	.rate_max		= 8000,
+	.channels_min		= 1,
+	.channels_max		= 1,
+	.buffer_bytes_max	= MAX_BUFFER,
+	.period_bytes_min	= G723_PERIOD_BYTES,
+	.period_bytes_max	= G723_PERIOD_BYTES,
+	.periods_min		= PERIODS_MIN,
+	.periods_max		= PERIODS_MAX,
+};
+
+static int snd_solo_pcm_open(struct snd_pcm_substream *ss)
+{
+	struct solo6010_dev *solo_dev = snd_pcm_substream_chip(ss);
+	struct solo_snd_pcm *solo_pcm;
+
+	solo_pcm = kzalloc(sizeof(*solo_pcm), GFP_KERNEL);
+	if (solo_pcm == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&solo_pcm->lock);
+	solo_pcm->solo_dev = solo_dev;
+	ss->runtime->hw = snd_solo_pcm_hw;
+
+	snd_pcm_substream_chip(ss) = solo_pcm;
+
+	return 0;
+}
+
+static int snd_solo_pcm_close(struct snd_pcm_substream *ss)
+{
+	struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+
+	snd_pcm_substream_chip(ss) = solo_pcm->solo_dev;
+	kfree(solo_pcm);
+
+        return 0;
+}
+
+static int snd_solo_pcm_trigger(struct snd_pcm_substream *ss, int cmd)
+{
+	struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+	struct solo6010_dev *solo_dev = solo_pcm->solo_dev;
+	int ret = 0;
+
+	spin_lock(&solo_pcm->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		if (solo_pcm->on == 0) {
+			/* If this is the first user, switch on interrupts */
+			if (atomic_inc_return(&solo_dev->snd_users) == 1)
+				solo6010_irq_on(solo_dev, SOLO_IRQ_G723);
+			solo_pcm->on = 1;
+		}
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		if (solo_pcm->on) {
+			/* If this was our last user, switch them off */
+			if (atomic_dec_return(&solo_dev->snd_users) == 0)
+				solo6010_irq_off(solo_dev, SOLO_IRQ_G723);
+			solo_pcm->on = 0;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock(&solo_pcm->lock);
+
+	return ret;
+}
+
+static int snd_solo_pcm_prepare(struct snd_pcm_substream *ss)
+{
+        return 0;
+}
+
+static snd_pcm_uframes_t snd_solo_pcm_pointer(struct snd_pcm_substream *ss)
+{
+	struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+	struct solo6010_dev *solo_dev = solo_pcm->solo_dev;
+	snd_pcm_uframes_t idx = solo_reg_read(solo_dev, SOLO_AUDIO_STA) & 0x1f;
+
+	return idx * G723_FRAMES_PER_PAGE;
+}
+
+static int snd_solo_pcm_copy(struct snd_pcm_substream *ss, int channel,
+			     snd_pcm_uframes_t pos, void __user *dst,
+			     snd_pcm_uframes_t count)
+{
+	struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+	struct solo6010_dev *solo_dev = solo_pcm->solo_dev;
+	int err, i;
+
+	for (i = 0; i < (count / G723_FRAMES_PER_PAGE); i++) {
+		int page = (pos / G723_FRAMES_PER_PAGE) + i;
+
+		err = solo_p2m_dma(solo_dev, SOLO_P2M_DMA_ID_G723E, 0,
+				   solo_pcm->g723_buf,
+				   SOLO_G723_EXT_ADDR(solo_dev) +
+				   (page * G723_PERIOD_BLOCK) +
+				   (ss->number * G723_PERIOD_BYTES),
+				   G723_PERIOD_BYTES);
+		if (err)
+			return err;
+
+		err = copy_to_user(dst + (i * G723_PERIOD_BYTES),
+				   solo_pcm->g723_buf, G723_PERIOD_BYTES);
+
+		if (err)
+			return err; 
+	}
+
+	return 0;
+}
+
+static struct snd_pcm_ops snd_solo_pcm_ops = {
+	.open = snd_solo_pcm_open,
+	.close = snd_solo_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_solo_hw_params,
+	.hw_free = snd_solo_hw_free,
+	.prepare = snd_solo_pcm_prepare,
+	.trigger = snd_solo_pcm_trigger,
+	.pointer = snd_solo_pcm_pointer,
+	.copy = snd_solo_pcm_copy,
+};
+
+static int snd_solo_capture_volume_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *info)
+{
+	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	info->count = 1;
+	info->value.integer.min = 0;
+	info->value.integer.max = 15;
+	info->value.integer.step = 1;
+
+	return 0;
+}
+
+static int snd_solo_capture_volume_get(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *value)
+{
+	struct solo6010_dev *solo_dev = snd_kcontrol_chip(kcontrol);
+	u8 ch = value->id.numid - 1;
+
+	value->value.integer.value[0] = tw28_get_audio_gain(solo_dev, ch);
+
+        return 0;
+}
+
+static int snd_solo_capture_volume_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *value)
+{
+	struct solo6010_dev *solo_dev = snd_kcontrol_chip(kcontrol);
+	u8 ch = value->id.numid - 1;
+        u8 old_val;
+
+        old_val = tw28_get_audio_gain(solo_dev, ch);
+	if (old_val == value->value.integer.value[0])
+		return 0;
+
+	tw28_set_audio_gain(solo_dev, ch, value->value.integer.value[0]);
+
+        return 1;
+}
+
+static struct snd_kcontrol_new snd_solo_capture_volume = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Capture Volume",
+	.info = snd_solo_capture_volume_info,
+	.get = snd_solo_capture_volume_get,
+	.put = snd_solo_capture_volume_put,
+};
+
+static int solo_snd_pcm_init(struct solo6010_dev *solo_dev)
+{
+	struct snd_card *card = solo_dev->snd_card;
+	struct snd_pcm *pcm;
+	struct snd_pcm_substream *ss;
+	int ret;
+	int i;
+
+	ret = snd_pcm_new(card, card->driver, 0, 0, solo_dev->nr_chans,
+			  &pcm);
+	if (ret < 0)
+		return ret;
+
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+			&snd_solo_pcm_ops);
+
+	snd_pcm_chip(pcm) = solo_dev;
+	pcm->info_flags = 0;
+	strcpy(pcm->name, card->shortname);
+
+	for (i = 0, ss = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+	     ss; ss = ss->next, i++)
+		sprintf(ss->name, "Camera #%d Audio", i);
+
+	ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+					SNDRV_DMA_TYPE_CONTINUOUS,
+					snd_dma_continuous_data(GFP_KERNEL),
+					MAX_BUFFER, MAX_BUFFER);
+	if (ret < 0)
+		return ret;
+
+	solo_dev->snd_pcm = pcm;
+
+	return 0;
+}
+
+int solo_g723_init(struct solo6010_dev *solo_dev)
+{
+	static struct snd_device_ops ops = { NULL };
+	struct snd_card *card;
+	struct snd_kcontrol_new kctl;
+	char name[32];
+	int ret;
+
+	atomic_set(&solo_dev->snd_users, 0);
+
+	/* Allows for easier mapping between video and audio */
+	sprintf(name, "Softlogic%d", solo_dev->vfd->num);
+
+	ret = snd_card_create(SNDRV_DEFAULT_IDX1, name, THIS_MODULE, 0,
+			      &solo_dev->snd_card);
+	if (ret < 0)
+		return ret;
+
+	card = solo_dev->snd_card;
+
+	strcpy(card->driver, SOLO6010_NAME);
+	strcpy(card->shortname, "SOLO-6010 Audio");
+	sprintf(card->longname, "%s on %s IRQ %d", card->shortname,
+		pci_name(solo_dev->pdev), solo_dev->pdev->irq);
+	snd_card_set_dev(card, &solo_dev->pdev->dev);
+
+	ret = snd_device_new(card, SNDRV_DEV_LOWLEVEL, solo_dev, &ops);
+	if (ret < 0)
+		goto snd_error;
+
+	/* Mixer controls */
+	strcpy(card->mixername, "SOLO-6010");
+	kctl = snd_solo_capture_volume;
+	kctl.count = solo_dev->nr_chans;
+        ret = snd_ctl_add(card, snd_ctl_new1(&kctl, solo_dev));
+	if (ret < 0)
+		return ret;
+
+	if ((ret = solo_snd_pcm_init(solo_dev)) < 0)
+		goto snd_error;
+
+	if ((ret = snd_card_register(card)) < 0)
+		goto snd_error;
+
+	solo_g723_config(solo_dev);
+
+	dev_info(&solo_dev->pdev->dev, "Alsa sound card as %s\n", name);
+
+	return 0;
+
+snd_error:
+	snd_card_free(card);
+	return ret;
+}
+
+void solo_g723_exit(struct solo6010_dev *solo_dev)
+{
+	solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL, 0);
+	solo6010_irq_off(solo_dev, SOLO_IRQ_G723);
+
+	snd_card_free(solo_dev->snd_card);
+}
diff --git a/drivers/staging/solo6x10/solo6010-gpio.c b/drivers/staging/solo6x10/solo6010-gpio.c
new file mode 100644
index 00000000000..46f7a71edab
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-gpio.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+
+#include "solo6010.h"
+
+static void solo_gpio_mode(struct solo6010_dev *solo_dev,
+			   unsigned int port_mask, unsigned int mode)
+{
+	int port;
+	unsigned int ret;
+
+	ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_0);
+
+	/* To set gpio */
+	for (port = 0; port < 16; port++) {
+		if (!((1 << port) & port_mask))
+			continue;
+
+		ret &= (~(3 << (port << 1)));
+		ret |= ((mode & 3) << (port << 1));
+	}
+
+	solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_0, ret);
+
+	/* To set extended gpio - sensor */
+	ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_1);
+
+	for (port = 0; port < 16; port++) {
+		if (!((1 << (port + 16)) & port_mask))
+			continue;
+
+		if (!mode)
+			ret &= ~(1 << port);
+		else
+			ret |= 1 << port;
+	}
+
+	solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_1, ret);
+}
+
+static void solo_gpio_set(struct solo6010_dev *solo_dev, unsigned int value)
+{
+	solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+		       solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) | value);
+}
+
+static void solo_gpio_clear(struct solo6010_dev *solo_dev, unsigned int value)
+{
+	solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+		       solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) & ~value);
+}
+
+static void solo_gpio_config(struct solo6010_dev *solo_dev)
+{
+	/* Video reset */
+	solo_gpio_mode(solo_dev, 0x30, 1);
+	solo_gpio_clear(solo_dev, 0x30);
+	udelay(100);
+	solo_gpio_set(solo_dev, 0x30);
+	udelay(100);
+
+	/* Warning: Don't touch the next line unless you're sure of what
+	 * you're doing: first four gpio [0-3] are used for video. */
+	solo_gpio_mode(solo_dev, 0x0f, 2);
+
+	/* We use bit 8-15 of SOLO_GPIO_CONFIG_0 for relay purposes */
+	solo_gpio_mode(solo_dev, 0xff00, 1);
+
+	/* Initially set relay status to 0 */
+	solo_gpio_clear(solo_dev, 0xff00);
+}
+
+int solo_gpio_init(struct solo6010_dev *solo_dev)
+{
+        solo_gpio_config(solo_dev);
+        return 0;
+}
+
+void solo_gpio_exit(struct solo6010_dev *solo_dev)
+{
+	solo_gpio_clear(solo_dev, 0x30);
+	solo_gpio_config(solo_dev);
+}
diff --git a/drivers/staging/solo6x10/solo6010-i2c.c b/drivers/staging/solo6x10/solo6010-i2c.c
new file mode 100644
index 00000000000..2bb86fa9e9e
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-i2c.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* XXX: The SOLO6010 i2c does not have separate interrupts for each i2c
+ * channel. The bus can only handle one i2c event at a time. The below handles
+ * this all wrong. We should be using the status registers to see if the bus
+ * is in use, and have a global lock to check the status register. Also,
+ * the bulk of the work should be handled out-of-interrupt. The ugly loops
+ * that occur during interrupt scare me. The ISR should merely signal
+ * thread context, ACK the interrupt, and move on. -- BenC */
+
+#include <linux/kernel.h>
+
+#include "solo6010.h"
+
+u8 solo_i2c_readbyte(struct solo6010_dev *solo_dev, int id, u8 addr, u8 off)
+{
+	struct i2c_msg msgs[2];
+	u8 data;
+
+	msgs[0].flags = 0;
+	msgs[0].addr = addr;
+	msgs[0].len = 1;
+	msgs[0].buf = &off;
+
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].addr = addr;
+	msgs[1].len = 1;
+	msgs[1].buf = &data;
+
+	i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2);
+
+        return data;
+}
+
+void solo_i2c_writebyte(struct solo6010_dev *solo_dev, int id, u8 addr,
+			u8 off, u8 data)
+{
+	struct i2c_msg msgs;
+	u8 buf[2];
+
+	buf[0] = off;
+	buf[1] = data;
+	msgs.flags = 0;
+	msgs.addr = addr;
+	msgs.len = 2;
+	msgs.buf = buf;
+
+	i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1);
+}
+
+static void solo_i2c_flush(struct solo6010_dev *solo_dev, int wr)
+{
+	u32 ctrl;
+
+	ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id);
+
+	if (solo_dev->i2c_state == IIC_STATE_START)
+		ctrl |= SOLO_IIC_START;
+
+	if (wr) {
+		ctrl |= SOLO_IIC_WRITE;
+	} else {
+		ctrl |= SOLO_IIC_READ;
+		if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK))
+			ctrl |= SOLO_IIC_ACK_EN;
+	}
+
+	if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len)
+		ctrl |= SOLO_IIC_STOP;
+
+	solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl);
+}
+
+static void solo_i2c_start(struct solo6010_dev *solo_dev)
+{
+	u32 addr = solo_dev->i2c_msg->addr << 1;
+
+	if (solo_dev->i2c_msg->flags & I2C_M_RD)
+		addr |= 1;
+
+	solo_dev->i2c_state = IIC_STATE_START;
+	solo_reg_write(solo_dev, SOLO_IIC_TXD, addr);
+	solo_i2c_flush(solo_dev, 1);
+}
+
+static void solo_i2c_stop(struct solo6010_dev *solo_dev)
+{
+	solo6010_irq_off(solo_dev, SOLO_IRQ_IIC);
+	solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
+	solo_dev->i2c_state = IIC_STATE_STOP;
+	wake_up(&solo_dev->i2c_wait);
+}
+
+static int solo_i2c_handle_read(struct solo6010_dev *solo_dev)
+{
+prepare_read:
+	if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
+		solo_i2c_flush(solo_dev, 0);
+		return 0;
+	}
+
+	solo_dev->i2c_msg_ptr = 0;
+	solo_dev->i2c_msg++;
+	solo_dev->i2c_msg_num--;
+
+	if (solo_dev->i2c_msg_num == 0) {
+		solo_i2c_stop(solo_dev);
+		return 0;
+	}
+
+	if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
+		solo_i2c_start(solo_dev);
+	} else {
+		if (solo_dev->i2c_msg->flags & I2C_M_RD)
+			goto prepare_read;
+		else
+			solo_i2c_stop(solo_dev);
+	}
+
+	return 0;
+}
+
+static int solo_i2c_handle_write(struct solo6010_dev *solo_dev)
+{
+retry_write:
+	if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
+		solo_reg_write(solo_dev, SOLO_IIC_TXD,
+			       solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]);
+		solo_dev->i2c_msg_ptr++;
+		solo_i2c_flush(solo_dev, 1);
+		return 0;
+	}
+
+	solo_dev->i2c_msg_ptr = 0;
+	solo_dev->i2c_msg++;
+	solo_dev->i2c_msg_num--;
+
+	if (solo_dev->i2c_msg_num == 0) {
+		solo_i2c_stop(solo_dev);
+		return 0;
+	}
+
+	if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
+		solo_i2c_start(solo_dev);
+	} else {
+		if (solo_dev->i2c_msg->flags & I2C_M_RD)
+			solo_i2c_stop(solo_dev);
+		else
+			goto retry_write;
+	}
+
+	return 0;
+}
+
+int solo_i2c_isr(struct solo6010_dev *solo_dev)
+{
+	u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL);
+	int ret = -EINVAL;
+
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_IIC);
+
+	if (status & (SOLO_IIC_STATE_TRNS & SOLO_IIC_STATE_SIG_ERR) ||
+	    solo_dev->i2c_id < 0) {
+		solo_i2c_stop(solo_dev);
+		return -ENXIO;
+	}
+
+	switch (solo_dev->i2c_state) {
+	case IIC_STATE_START:
+		if (solo_dev->i2c_msg->flags & I2C_M_RD) {
+			solo_dev->i2c_state = IIC_STATE_READ;
+			ret = solo_i2c_handle_read(solo_dev);
+			break;
+		}
+
+		solo_dev->i2c_state = IIC_STATE_WRITE;
+	case IIC_STATE_WRITE:
+		ret = solo_i2c_handle_write(solo_dev);
+		break;
+
+	case IIC_STATE_READ:
+		solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] =
+			solo_reg_read(solo_dev, SOLO_IIC_RXD);
+		solo_dev->i2c_msg_ptr++;
+
+		ret = solo_i2c_handle_read(solo_dev);
+		break;
+
+	default:
+		solo_i2c_stop(solo_dev);
+	}
+
+	return ret;
+}
+
+static int solo_i2c_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg msgs[], int num)
+{
+	struct solo6010_dev *solo_dev = adap->algo_data;
+	unsigned long timeout;
+	int ret;
+	int i;
+	DEFINE_WAIT(wait);
+
+	for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+		if (&solo_dev->i2c_adap[i] == adap)
+			break;
+	}
+
+	if (i == SOLO_I2C_ADAPTERS)
+		return num; // XXX Right return value for failure?
+
+	down(&solo_dev->i2c_sem);
+	solo_dev->i2c_id = i;
+	solo_dev->i2c_msg = msgs;
+	solo_dev->i2c_msg_num = num;
+	solo_dev->i2c_msg_ptr = 0;
+
+	solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
+	solo6010_irq_on(solo_dev, SOLO_IRQ_IIC);
+	solo_i2c_start(solo_dev);
+
+	timeout = HZ / 2;
+
+	for (;;) {
+		prepare_to_wait(&solo_dev->i2c_wait, &wait, TASK_INTERRUPTIBLE);
+
+		if (solo_dev->i2c_state == IIC_STATE_STOP)
+			break;
+
+		timeout = schedule_timeout(timeout);
+		if (!timeout)
+			break;
+
+		if (signal_pending(current))
+			break;
+	}
+
+	finish_wait(&solo_dev->i2c_wait, &wait);
+	ret = num - solo_dev->i2c_msg_num;
+	solo_dev->i2c_state = IIC_STATE_IDLE;
+	solo_dev->i2c_id = -1;
+
+	up(&solo_dev->i2c_sem);
+
+	return ret;
+}
+
+static u32 solo_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm solo_i2c_algo = {
+	.master_xfer	= solo_i2c_master_xfer,
+	.functionality	= solo_i2c_functionality,
+};
+
+int solo_i2c_init(struct solo6010_dev *solo_dev)
+{
+	int i;
+	int ret;
+
+	solo_reg_write(solo_dev, SOLO_IIC_CFG,
+		       SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE);
+
+	solo_dev->i2c_id = -1;
+	solo_dev->i2c_state = IIC_STATE_IDLE;
+	init_waitqueue_head(&solo_dev->i2c_wait);
+	init_MUTEX(&solo_dev->i2c_sem);
+
+	for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+		struct i2c_adapter *adap = &solo_dev->i2c_adap[i];
+
+		snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d",
+			 SOLO6010_NAME, i);
+		adap->algo = &solo_i2c_algo;
+		adap->algo_data = solo_dev;
+		adap->retries = 1;
+		adap->dev.parent = &solo_dev->pdev->dev;
+
+		if ((ret = i2c_add_adapter(adap))) {
+			adap->algo_data = NULL;
+			break;
+		}
+	}
+
+	if (ret) {
+		for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+			if (!solo_dev->i2c_adap[i].algo_data)
+				break;
+			i2c_del_adapter(&solo_dev->i2c_adap[i]);
+			solo_dev->i2c_adap[i].algo_data = NULL;
+		}
+		return ret;
+	}
+
+	dev_info(&solo_dev->pdev->dev, "Enabled %d i2c adapters\n",
+		 SOLO_I2C_ADAPTERS);
+
+	return 0;
+}
+
+void solo_i2c_exit(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+		if (!solo_dev->i2c_adap[i].algo_data)
+			continue;
+		i2c_del_adapter(&solo_dev->i2c_adap[i]);
+		solo_dev->i2c_adap[i].algo_data = NULL;
+	}
+}
diff --git a/drivers/staging/solo6x10/solo6010-jpeg.h b/drivers/staging/solo6x10/solo6010-jpeg.h
new file mode 100644
index 00000000000..fb0507ecb30
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-jpeg.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_JPEG_H
+#define __SOLO6010_JPEG_H
+
+static unsigned char jpeg_header[] = {
+	0xff, 0xd8, 0xff, 0xfe, 0x00, 0x0d, 0x42, 0x6c,
+	0x75, 0x65, 0x63, 0x68, 0x65, 0x72, 0x72, 0x79,
+	0x20, 0xff, 0xdb, 0x00, 0x43, 0x00, 0x20, 0x16,
+	0x18, 0x1c, 0x18, 0x14, 0x20, 0x1c, 0x1a, 0x1c,
+	0x24, 0x22, 0x20, 0x26, 0x30, 0x50, 0x34, 0x30,
+	0x2c, 0x2c, 0x30, 0x62, 0x46, 0x4a, 0x3a, 0x50,
+	0x74, 0x66, 0x7a, 0x78, 0x72, 0x66, 0x70, 0x6e,
+	0x80, 0x90, 0xb8, 0x9c, 0x80, 0x88, 0xae, 0x8a,
+	0x6e, 0x70, 0xa0, 0xda, 0xa2, 0xae, 0xbe, 0xc4,
+	0xce, 0xd0, 0xce, 0x7c, 0x9a, 0xe2, 0xf2, 0xe0,
+	0xc8, 0xf0, 0xb8, 0xca, 0xce, 0xc6, 0xff, 0xdb,
+	0x00, 0x43, 0x01, 0x22, 0x24, 0x24, 0x30, 0x2a,
+	0x30, 0x5e, 0x34, 0x34, 0x5e, 0xc6, 0x84, 0x70,
+	0x84, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+	0xc6, 0xc6, 0xc6, 0xff, 0xc4, 0x01, 0xa2, 0x00,
+	0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	0x08, 0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01,
+	0x03, 0x03, 0x02, 0x04, 0x03, 0x05, 0x05, 0x04,
+	0x04, 0x00, 0x00, 0x01, 0x7d, 0x01, 0x02, 0x03,
+	0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31, 0x41,
+	0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14,
+	0x32, 0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1,
+	0xc1, 0x15, 0x52, 0xd1, 0xf0, 0x24, 0x33, 0x62,
+	0x72, 0x82, 0x09, 0x0a, 0x16, 0x17, 0x18, 0x19,
+	0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a, 0x34,
+	0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44,
+	0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54,
+	0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x63, 0x64,
+	0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x73, 0x74,
+	0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83, 0x84,
+	0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93,
+	0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2,
+	0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa,
+	0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, 0xb8, 0xb9,
+	0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8,
+	0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
+	0xd8, 0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5,
+	0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xf1, 0xf2, 0xf3,
+	0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0x01,
+	0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+	0x08, 0x09, 0x0a, 0x0b, 0x11, 0x00, 0x02, 0x01,
+	0x02, 0x04, 0x04, 0x03, 0x04, 0x07, 0x05, 0x04,
+	0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01, 0x02,
+	0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12,
+	0x41, 0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32,
+	0x81, 0x08, 0x14, 0x42, 0x91, 0xa1, 0xb1, 0xc1,
+	0x09, 0x23, 0x33, 0x52, 0xf0, 0x15, 0x62, 0x72,
+	0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25, 0xf1,
+	0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29,
+	0x2a, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43,
+	0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4a, 0x53,
+	0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5a, 0x63,
+	0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, 0x73,
+	0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82,
+	0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a,
+	0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
+	0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8,
+	0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7,
+	0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6,
+	0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5,
+	0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe2, 0xe3, 0xe4,
+	0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, 0xf2, 0xf3,
+	0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xff,
+	0xc0, 0x00, 0x11, 0x08, 0x00, 0xf0, 0x02, 0xc0,
+	0x03, 0x01, 0x22, 0x00, 0x02, 0x11, 0x01, 0x03,
+	0x11, 0x01, 0xff, 0xda, 0x00, 0x0c, 0x03, 0x01,
+	0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+};
+
+/* This is the byte marker for the start of SOF0: 0xffc0 marker */
+#define SOF0_START	575
+
+#endif /* __SOLO6010_JPEG_H */
diff --git a/drivers/staging/solo6x10/solo6010-offsets.h b/drivers/staging/solo6x10/solo6010-offsets.h
new file mode 100644
index 00000000000..2431de989c0
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-offsets.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_OFFSETS_H
+#define __SOLO6010_OFFSETS_H
+
+/* Offsets and sizes of the external address */
+#define SOLO_DISP_EXT_ADDR(__solo)		0x00000000
+#define SOLO_DISP_EXT_SIZE			0x00480000
+
+#define SOLO_DEC2LIVE_EXT_ADDR(__solo) \
+		(SOLO_DISP_EXT_ADDR(__solo) + SOLO_DISP_EXT_SIZE)
+#define SOLO_DEC2LIVE_EXT_SIZE			0x00240000
+
+#define SOLO_OSG_EXT_ADDR(__solo) \
+		(SOLO_DEC2LIVE_EXT_ADDR(__solo) + SOLO_DEC2LIVE_EXT_SIZE)
+#define SOLO_OSG_EXT_SIZE			0x00120000
+
+#define SOLO_EOSD_EXT_ADDR(__solo) \
+		(SOLO_OSG_EXT_ADDR(__solo) + SOLO_OSG_EXT_SIZE)
+#define SOLO_EOSD_EXT_SIZE			0x00010000
+
+#define SOLO_MOTION_EXT_ADDR(__solo) \
+		(SOLO_EOSD_EXT_ADDR(__solo) + \
+		 (SOLO_EOSD_EXT_SIZE * __solo->nr_chans))
+#define SOLO_MOTION_EXT_SIZE			0x00080000
+
+#define SOLO_G723_EXT_ADDR(__solo) \
+		(SOLO_MOTION_EXT_ADDR(__solo) + SOLO_MOTION_EXT_SIZE)
+#define SOLO_G723_EXT_SIZE			0x00010000
+
+#define SOLO_CAP_EXT_ADDR(__solo) \
+		(SOLO_G723_EXT_ADDR(__solo) + SOLO_G723_EXT_SIZE)
+#define SOLO_CAP_EXT_MAX_PAGE			(18 + 15)
+#define SOLO_CAP_EXT_SIZE			(SOLO_CAP_EXT_MAX_PAGE * 65536)
+
+/* This +1 is very important -- Why?! -- BenC */
+#define SOLO_EREF_EXT_ADDR(__solo) \
+		(SOLO_CAP_EXT_ADDR(__solo) + \
+		 (SOLO_CAP_EXT_SIZE * (__solo->nr_chans + 1)))
+#define SOLO_EREF_EXT_SIZE			0x00140000
+
+#define SOLO_MP4E_EXT_ADDR(__solo) \
+		(SOLO_EREF_EXT_ADDR(__solo) + \
+		 (SOLO_EREF_EXT_SIZE * __solo->nr_chans))
+#define SOLO_MP4E_EXT_SIZE(__solo)		(0x00080000 * __solo->nr_chans)
+
+#define SOLO_DREF_EXT_ADDR(__solo) \
+		(SOLO_MP4E_EXT_ADDR(__solo) + SOLO_MP4E_EXT_SIZE(__solo))
+#define SOLO_DREF_EXT_SIZE			0x00140000
+
+#define SOLO_MP4D_EXT_ADDR(__solo) \
+		(SOLO_DREF_EXT_ADDR(__solo) + \
+		 (SOLO_DREF_EXT_SIZE * __solo->nr_chans))
+#define SOLO_MP4D_EXT_SIZE			0x00080000
+
+#define SOLO_JPEG_EXT_ADDR(__solo) \
+		(SOLO_MP4D_EXT_ADDR(__solo) + \
+		 (SOLO_MP4D_EXT_SIZE * __solo->nr_chans))
+#define SOLO_JPEG_EXT_SIZE(__solo)		(0x00080000 * __solo->nr_chans)
+
+#endif /* __SOLO6010_OFFSETS_H */
diff --git a/drivers/staging/solo6x10/solo6010-osd-font.h b/drivers/staging/solo6x10/solo6010-osd-font.h
new file mode 100644
index 00000000000..d6f565bd76c
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-osd-font.h
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_OSD_FONT_H
+#define __SOLO6010_OSD_FONT_H
+
+static const unsigned int solo_osd_font[] = {
+	0x00000000, 0x0000c0c8, 0xccfefe0c, 0x08000000,
+	0x00000000, 0x10103838, 0x7c7cfefe, 0x00000000,	// 0
+	0x00000000, 0xfefe7c7c, 0x38381010, 0x10000000,
+	0x00000000, 0x7c82fefe, 0xfefefe7c, 0x00000000,
+	0x00000000, 0x00001038, 0x10000000, 0x00000000,
+	0x00000000, 0x0010387c, 0xfe7c3810, 0x00000000,
+	0x00000000, 0x00384444, 0x44380000, 0x00000000,
+	0x00000000, 0x38448282, 0x82443800, 0x00000000,
+	0x00000000, 0x007c7c7c, 0x7c7c0000, 0x00000000,
+	0x00000000, 0x6c6c6c6c, 0x6c6c6c6c, 0x00000000,
+	0x00000000, 0x061e7efe, 0xfe7e1e06, 0x00000000,
+	0x00000000, 0xc0f0fcfe, 0xfefcf0c0, 0x00000000,
+	0x00000000, 0xc6cedefe, 0xfedecec6, 0x00000000,
+	0x00000000, 0xc6e6f6fe, 0xfef6e6c6, 0x00000000,
+	0x00000000, 0x12367efe, 0xfe7e3612, 0x00000000,
+	0x00000000, 0x90d8fcfe, 0xfefcd890, 0x00000000,
+	0x00000038, 0x7cc692ba, 0x92c67c38, 0x00000000,
+	0x00000038, 0x7cc6aa92, 0xaac67c38, 0x00000000,
+	0x00000038, 0x7830107c, 0xbaa8680c, 0x00000000,
+	0x00000038, 0x3c18127c, 0xb8382c60, 0x00000000,
+	0x00000044, 0xaa6c8254, 0x38eec67c, 0x00000000,
+	0x00000082, 0x44288244, 0x38c6827c, 0x00000000,
+	0x00000038, 0x444444fe, 0xfeeec6fe, 0x00000000,
+	0x00000018, 0x78187818, 0x3c7e7e3c, 0x00000000,
+	0x00000000, 0x3854929a, 0x82443800, 0x00000000,
+	0x00000000, 0x00c0c8cc, 0xfefe0c08, 0x00000000,
+	0x0000e0a0, 0xe040e00e, 0x8a0ea40e, 0x00000000,
+	0x0000e0a0, 0xe040e00e, 0x0a8e440e, 0x00000000,
+	0x0000007c, 0x82829292, 0x929282fe, 0x00000000,
+	0x000000f8, 0xfc046494, 0x946404fc, 0x00000000,
+	0x0000003f, 0x7f404c52, 0x524c407f, 0x00000000,
+	0x0000007c, 0x82ba82ba, 0x82ba82fe, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x183c3c3c, 0x18180018, 0x18000000,	// 32   !
+	0x00000066, 0x66240000, 0x00000000, 0x00000000,
+	0x00000000, 0x6c6cfe6c, 0x6c6cfe6c, 0x6c000000,	// 34 " #
+	0x00001010, 0x7cd6d616, 0x7cd0d6d6, 0x7c101000,
+	0x00000000, 0x0086c660, 0x30180cc6, 0xc2000000,	// 36 $ %
+	0x00000000, 0x386c6c38, 0xdc766666, 0xdc000000,
+	0x0000000c, 0x0c0c0600, 0x00000000, 0x00000000,	// 38 & '
+	0x00000000, 0x30180c0c, 0x0c0c0c18, 0x30000000,
+	0x00000000, 0x0c183030, 0x30303018, 0x0c000000,	// 40 ( )
+	0x00000000, 0x0000663c, 0xff3c6600, 0x00000000,
+	0x00000000, 0x00001818, 0x7e181800, 0x00000000,	// 42 * +
+	0x00000000, 0x00000000, 0x00000e0e, 0x0c060000,
+	0x00000000, 0x00000000, 0x7e000000, 0x00000000,	// 44 , -
+	0x00000000, 0x00000000, 0x00000006, 0x06000000,
+	0x00000000, 0x80c06030, 0x180c0602, 0x00000000,	// 46 . /
+	0x0000007c, 0xc6e6f6de, 0xcec6c67c, 0x00000000,
+	0x00000030, 0x383c3030, 0x303030fc, 0x00000000,	// 48 0 1
+	0x0000007c, 0xc6c06030, 0x180cc6fe, 0x00000000,
+	0x0000007c, 0xc6c0c07c, 0xc0c0c67c, 0x00000000,	// 50 2 3
+	0x00000060, 0x70786c66, 0xfe6060f0, 0x00000000,
+	0x000000fe, 0x0606067e, 0xc0c0c67c, 0x00000000,	// 52 4 5
+	0x00000038, 0x0c06067e, 0xc6c6c67c, 0x00000000,
+	0x000000fe, 0xc6c06030, 0x18181818, 0x00000000,	// 54 6 7
+	0x0000007c, 0xc6c6c67c, 0xc6c6c67c, 0x00000000,
+	0x0000007c, 0xc6c6c6fc, 0xc0c06038, 0x00000000,	// 56 8 9
+	0x00000000, 0x18180000, 0x00181800, 0x00000000,
+	0x00000000, 0x18180000, 0x0018180c, 0x00000000,	// 58 : ;
+	0x00000060, 0x30180c06, 0x0c183060, 0x00000000,
+	0x00000000, 0x007e0000, 0x007e0000, 0x00000000,
+	0x00000006, 0x0c183060, 0x30180c06, 0x00000000,
+	0x0000007c, 0xc6c66030, 0x30003030, 0x00000000,
+	0x0000007c, 0xc6f6d6d6, 0x7606067c, 0x00000000,
+	0x00000010, 0x386cc6c6, 0xfec6c6c6, 0x00000000,	// 64 @ A
+	0x0000007e, 0xc6c6c67e, 0xc6c6c67e, 0x00000000,
+	0x00000078, 0xcc060606, 0x0606cc78, 0x00000000,	// 66
+	0x0000003e, 0x66c6c6c6, 0xc6c6663e, 0x00000000,
+	0x000000fe, 0x0606063e, 0x060606fe, 0x00000000,	// 68
+	0x000000fe, 0x0606063e, 0x06060606, 0x00000000,
+	0x00000078, 0xcc060606, 0xf6c6ccb8, 0x00000000,	// 70
+	0x000000c6, 0xc6c6c6fe, 0xc6c6c6c6, 0x00000000,
+	0x0000003c, 0x18181818, 0x1818183c, 0x00000000,	// 72
+	0x00000060, 0x60606060, 0x6066663c, 0x00000000,
+	0x000000c6, 0xc666361e, 0x3666c6c6, 0x00000000,	// 74
+	0x00000006, 0x06060606, 0x060606fe, 0x00000000,
+	0x000000c6, 0xeefed6c6, 0xc6c6c6c6, 0x00000000,	// 76
+	0x000000c6, 0xcedefef6, 0xe6c6c6c6, 0x00000000,
+	0x00000038, 0x6cc6c6c6, 0xc6c66c38, 0x00000000,	// 78
+	0x0000007e, 0xc6c6c67e, 0x06060606, 0x00000000,
+	0x00000038, 0x6cc6c6c6, 0xc6d67c38, 0x60000000,	// 80
+	0x0000007e, 0xc6c6c67e, 0x66c6c6c6, 0x00000000,
+	0x0000007c, 0xc6c60c38, 0x60c6c67c, 0x00000000,	// 82
+	0x0000007e, 0x18181818, 0x18181818, 0x00000000,
+	0x000000c6, 0xc6c6c6c6, 0xc6c6c67c, 0x00000000,	// 84
+	0x000000c6, 0xc6c6c6c6, 0xc66c3810, 0x00000000,
+	0x000000c6, 0xc6c6c6c6, 0xd6d6fe6c, 0x00000000,	// 86
+	0x000000c6, 0xc6c66c38, 0x6cc6c6c6, 0x00000000,
+	0x00000066, 0x66666666, 0x3c181818, 0x00000000,	// 88
+	0x000000fe, 0xc0603018, 0x0c0606fe, 0x00000000,
+	0x0000003c, 0x0c0c0c0c, 0x0c0c0c3c, 0x00000000,	// 90
+	0x00000002, 0x060c1830, 0x60c08000, 0x00000000,
+	0x0000003c, 0x30303030, 0x3030303c, 0x00000000,	// 92
+	0x00001038, 0x6cc60000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00000000, 0x00fe0000,
+	0x00001818, 0x30000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00003c60, 0x7c66667c, 0x00000000,
+	0x0000000c, 0x0c0c7ccc, 0xcccccc7c, 0x00000000,
+	0x00000000, 0x00007cc6, 0x0606c67c, 0x00000000,
+	0x00000060, 0x60607c66, 0x6666667c, 0x00000000,
+	0x00000000, 0x00007cc6, 0xfe06c67c, 0x00000000,
+	0x00000078, 0x0c0c0c3e, 0x0c0c0c0c, 0x00000000,
+	0x00000000, 0x00007c66, 0x6666667c, 0x60603e00,
+	0x0000000c, 0x0c0c7ccc, 0xcccccccc, 0x00000000,
+	0x00000030, 0x30003830, 0x30303078, 0x00000000,
+	0x00000030, 0x30003c30, 0x30303030, 0x30301f00,
+	0x0000000c, 0x0c0ccc6c, 0x3c6ccccc, 0x00000000,
+	0x00000030, 0x30303030, 0x30303030, 0x00000000,
+	0x00000000, 0x000066fe, 0xd6d6d6d6, 0x00000000,
+	0x00000000, 0x000078cc, 0xcccccccc, 0x00000000,
+	0x00000000, 0x00007cc6, 0xc6c6c67c, 0x00000000,
+	0x00000000, 0x00007ccc, 0xcccccc7c, 0x0c0c0c00,
+	0x00000000, 0x00007c66, 0x6666667c, 0x60606000,
+	0x00000000, 0x000076dc, 0x0c0c0c0c, 0x00000000,
+	0x00000000, 0x00007cc6, 0x1c70c67c, 0x00000000,
+	0x00000000, 0x1818fe18, 0x18181870, 0x00000000,
+	0x00000000, 0x00006666, 0x6666663c, 0x00000000,
+	0x00000000, 0x0000c6c6, 0xc66c3810, 0x00000000,
+	0x00000000, 0x0000c6d6, 0xd6d6fe6c, 0x00000000,
+	0x00000000, 0x0000c66c, 0x38386cc6, 0x00000000,
+	0x00000000, 0x00006666, 0x6666667c, 0x60603e00,
+	0x00000000, 0x0000fe60, 0x30180cfe, 0x00000000,
+	0x00000070, 0x1818180e, 0x18181870, 0x00000000,
+	0x00000018, 0x18181800, 0x18181818, 0x00000000,
+	0x0000000e, 0x18181870, 0x1818180e, 0x00000000,
+	0x000000dc, 0x76000000, 0x00000000, 0x00000000,
+	0x00000000, 0x0010386c, 0xc6c6fe00, 0x00000000
+};
+
+#endif /* __SOLO6010_OSD_FONT_H */
diff --git a/drivers/staging/solo6x10/solo6010-p2m.c b/drivers/staging/solo6x10/solo6010-p2m.c
new file mode 100644
index 00000000000..1b81f069c7f
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-p2m.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+
+#include "solo6010.h"
+
+// #define SOLO_TEST_P2M
+
+int solo_p2m_dma(struct solo6010_dev *solo_dev, u8 id, int wr,
+		 void *sys_addr, u32 ext_addr, u32 size)
+{
+	dma_addr_t dma_addr;
+	int ret;
+
+	WARN_ON(!size);
+	WARN_ON(id >= SOLO_NR_P2M);
+	if (!size || id >= SOLO_NR_P2M)
+		return -EINVAL;
+
+	dma_addr = pci_map_single(solo_dev->pdev, sys_addr, size,
+				  wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+	ret = solo_p2m_dma_t(solo_dev, id, wr, dma_addr, ext_addr, size);
+
+	pci_unmap_single(solo_dev->pdev, dma_addr, size,
+			 wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+	return ret;
+}
+
+int solo_p2m_dma_t(struct solo6010_dev *solo_dev, u8 id, int wr,
+		   dma_addr_t dma_addr, u32 ext_addr, u32 size)
+{
+	struct solo_p2m_dev *p2m_dev;
+	unsigned int timeout = 0;
+
+	WARN_ON(!size);
+	WARN_ON(id >= SOLO_NR_P2M);
+	if (!size || id >= SOLO_NR_P2M)
+		return -EINVAL;
+
+	p2m_dev = &solo_dev->p2m_dev[id];
+
+	down(&p2m_dev->sem);
+
+start_dma:
+	INIT_COMPLETION(p2m_dev->completion);
+	p2m_dev->error = 0;
+	solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), dma_addr);
+	solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), ext_addr);
+	solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id),
+		       SOLO_P2M_COPY_SIZE(size >> 2));
+	solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id),
+		       SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) |
+		       (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON);
+
+	timeout = wait_for_completion_timeout(&p2m_dev->completion, HZ);
+
+	solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0);
+
+	/* XXX Really looks to me like we will get stuck here if a
+	 * real PCI P2M error occurs */
+	if (p2m_dev->error)
+		goto start_dma;
+
+	up(&p2m_dev->sem);
+
+	return (timeout == 0) ? -EAGAIN : 0;
+}
+
+#ifdef SOLO_TEST_P2M
+
+#define P2M_TEST_CHAR		0xbe
+
+static unsigned long long p2m_test(struct solo6010_dev *solo_dev, u8 id,
+				   u32 base, int size)
+{
+	u8 *wr_buf;
+	u8 *rd_buf;
+	int i;
+	unsigned long long err_cnt = 0;
+
+	wr_buf = kmalloc(size, GFP_KERNEL);
+	if (!wr_buf) {
+		printk(SOLO6010_NAME ": Failed to malloc for p2m_test\n");
+		return size;
+	}
+
+	rd_buf = kmalloc(size, GFP_KERNEL);
+	if (!rd_buf) {
+		printk(SOLO6010_NAME ": Failed to malloc for p2m_test\n");
+		kfree(wr_buf);
+		return size;
+	}
+
+	memset(wr_buf, P2M_TEST_CHAR, size);
+	memset(rd_buf, P2M_TEST_CHAR + 1, size);
+
+	solo_p2m_dma(solo_dev, id, 1, wr_buf, base, size);
+	solo_p2m_dma(solo_dev, id, 0, rd_buf, base, size);
+
+	for (i = 0; i < size; i++)
+		if (wr_buf[i] != rd_buf[i])
+			err_cnt++;
+
+	kfree(wr_buf);
+	kfree(rd_buf);
+
+	return err_cnt;
+}
+
+#define TEST_CHUNK_SIZE		(8 * 1024)
+
+static void run_p2m_test(struct solo6010_dev *solo_dev)
+{
+	unsigned long long errs = 0;
+	u32 size = SOLO_JPEG_EXT_ADDR(solo_dev) + SOLO_JPEG_EXT_SIZE(solo_dev);
+	int i, d;
+
+	printk(KERN_WARNING "%s: Testing %u bytes of external ram\n",
+	       SOLO6010_NAME, size);
+
+	for (i = 0; i < size; i += TEST_CHUNK_SIZE)
+		for (d = 0; d < 4; d++)
+			errs += p2m_test(solo_dev, d, i, TEST_CHUNK_SIZE);
+
+	printk(KERN_WARNING "%s: Found %llu errors during p2m test\n",
+	       SOLO6010_NAME, errs);
+
+	return;
+}
+#else
+#define run_p2m_test(__solo)	do{}while(0)
+#endif
+
+void solo_p2m_isr(struct solo6010_dev *solo_dev, int id)
+{
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_P2M(id));
+	complete(&solo_dev->p2m_dev[id].completion);
+}
+
+void solo_p2m_error_isr(struct solo6010_dev *solo_dev, u32 status)
+{
+	struct solo_p2m_dev *p2m_dev;
+	int i;
+
+	if (!(status & SOLO_PCI_ERR_P2M))
+		return;
+
+	for (i = 0; i < SOLO_NR_P2M; i++) {
+		p2m_dev = &solo_dev->p2m_dev[i];
+		p2m_dev->error = 1;
+		solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+		complete(&p2m_dev->completion);
+	}
+}
+
+void solo_p2m_exit(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	for (i = 0; i < SOLO_NR_P2M; i++)
+		solo6010_irq_off(solo_dev, SOLO_IRQ_P2M(i));
+}
+
+int solo_p2m_init(struct solo6010_dev *solo_dev)
+{
+	struct solo_p2m_dev *p2m_dev;
+	int i;
+
+	for (i = 0; i < SOLO_NR_P2M; i++) {
+		p2m_dev = &solo_dev->p2m_dev[i];
+
+		init_MUTEX(&p2m_dev->sem);
+		init_completion(&p2m_dev->completion);
+
+		solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(i),
+			       __pa(p2m_dev->desc));
+
+		solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+		solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i),
+			       SOLO_P2M_CSC_16BIT_565 |
+			       SOLO_P2M_DMA_INTERVAL(0) |
+			       SOLO_P2M_PCI_MASTER_MODE);
+		solo6010_irq_on(solo_dev, SOLO_IRQ_P2M(i));
+	}
+
+	run_p2m_test(solo_dev);
+
+	return 0;
+}
diff --git a/drivers/staging/solo6x10/solo6010-registers.h b/drivers/staging/solo6x10/solo6010-registers.h
new file mode 100644
index 00000000000..d39d3c636f5
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-registers.h
@@ -0,0 +1,657 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_REGISTERS_H
+#define __SOLO6010_REGISTERS_H
+
+#include "solo6010-offsets.h"
+
+/* Global 6010 system configuration */
+#define SOLO_SYS_CFG				0x0000
+#define   SOLO_SYS_CFG_FOUT_EN			0x00000001
+#define   SOLO_SYS_CFG_PLL_BYPASS		0x00000002
+#define   SOLO_SYS_CFG_PLL_PWDN			0x00000004
+#define   SOLO_SYS_CFG_OUTDIV(__n)		(((__n) & 0x003) << 3)
+#define   SOLO_SYS_CFG_FEEDBACKDIV(__n)		(((__n) & 0x1ff) << 5)
+#define   SOLO_SYS_CFG_INPUTDIV(__n)		(((__n) & 0x01f) << 14)
+#define   SOLO_SYS_CFG_CLOCK_DIV		0x00080000
+#define   SOLO_SYS_CFG_NCLK_DELAY(__n)		(((__n) & 0x003) << 24)
+#define   SOLO_SYS_CFG_PCLK_DELAY(__n)		(((__n) & 0x00f) << 26)
+#define   SOLO_SYS_CFG_SDRAM64BIT		0x40000000
+#define   SOLO_SYS_CFG_RESET			0x80000000
+
+#define	SOLO_DMA_CTRL				0x0004
+#define	  SOLO_DMA_CTRL_REFRESH_CYCLE(n)	((n)<<8)
+/* 0=16/32MB, 1=32/64MB, 2=64/128MB, 3=128/256MB */
+#define	  SOLO_DMA_CTRL_SDRAM_SIZE(n)		((n)<<6)
+#define	  SOLO_DMA_CTRL_SDRAM_CLK_INVERT	(1<<5)
+#define	  SOLO_DMA_CTRL_STROBE_SELECT		(1<<4)
+#define	  SOLO_DMA_CTRL_READ_DATA_SELECT	(1<<3)
+#define	  SOLO_DMA_CTRL_READ_CLK_SELECT		(1<<2)
+#define	  SOLO_DMA_CTRL_LATENCY(n)		((n)<<0)
+
+#define SOLO_SYS_VCLK				0x000C
+#define	  SOLO_VCLK_INVERT			(1<<22)
+/* 0=sys_clk/4, 1=sys_clk/2, 2=clk_in/2 of system input */
+#define	  SOLO_VCLK_SELECT(n)			((n)<<20)
+#define	  SOLO_VCLK_VIN1415_DELAY(n)		((n)<<14)
+#define	  SOLO_VCLK_VIN1213_DELAY(n)		((n)<<12)
+#define	  SOLO_VCLK_VIN1011_DELAY(n)		((n)<<10)
+#define	  SOLO_VCLK_VIN0809_DELAY(n)		((n)<<8)
+#define	  SOLO_VCLK_VIN0607_DELAY(n)		((n)<<6)
+#define	  SOLO_VCLK_VIN0405_DELAY(n)		((n)<<4)
+#define	  SOLO_VCLK_VIN0203_DELAY(n)		((n)<<2)
+#define	  SOLO_VCLK_VIN0001_DELAY(n)		((n)<<0)
+
+#define SOLO_IRQ_STAT				0x0010
+#define SOLO_IRQ_ENABLE				0x0014
+#define	  SOLO_IRQ_P2M(n)			(1<<((n)+17))
+#define	  SOLO_IRQ_GPIO				(1<<16)
+#define	  SOLO_IRQ_VIDEO_LOSS			(1<<15)
+#define	  SOLO_IRQ_VIDEO_IN			(1<<14)
+#define	  SOLO_IRQ_MOTION			(1<<13)
+#define	  SOLO_IRQ_ATA_CMD			(1<<12)
+#define	  SOLO_IRQ_ATA_DIR			(1<<11)
+#define	  SOLO_IRQ_PCI_ERR			(1<<10)
+#define	  SOLO_IRQ_PS2_1			(1<<9)
+#define	  SOLO_IRQ_PS2_0			(1<<8)
+#define	  SOLO_IRQ_SPI				(1<<7)
+#define	  SOLO_IRQ_IIC				(1<<6)
+#define	  SOLO_IRQ_UART(n)			(1<<((n) + 4))
+#define	  SOLO_IRQ_G723				(1<<3)
+#define	  SOLO_IRQ_DECODER			(1<<1)
+#define	  SOLO_IRQ_ENCODER			(1<<0)
+
+#define SOLO_CHIP_OPTION			0x001C
+#define   SOLO_CHIP_ID_MASK			0x00000007
+
+#define SOLO_EEPROM_CTRL			0x0060
+#define	  SOLO_EEPROM_ACCESS_EN			(1<<7)
+#define	  SOLO_EEPROM_CS			(1<<3)
+#define	  SOLO_EEPROM_CLK			(1<<2)
+#define	  SOLO_EEPROM_DO			(1<<1)
+#define	  SOLO_EEPROM_DI			(1<<0)
+#define	  SOLO_EEPROM_ENABLE			(EEPROM_ACCESS_EN | EEPROM_CS)
+
+#define SOLO_PCI_ERR				0x0070
+#define   SOLO_PCI_ERR_FATAL			0x00000001
+#define   SOLO_PCI_ERR_PARITY			0x00000002
+#define   SOLO_PCI_ERR_TARGET			0x00000004
+#define   SOLO_PCI_ERR_TIMEOUT			0x00000008
+#define   SOLO_PCI_ERR_P2M			0x00000010
+#define   SOLO_PCI_ERR_ATA			0x00000020
+#define   SOLO_PCI_ERR_P2M_DESC			0x00000040
+#define   SOLO_PCI_ERR_FSM0(__s)		(((__s) >> 16) & 0x0f)
+#define   SOLO_PCI_ERR_FSM1(__s)		(((__s) >> 20) & 0x0f)
+#define   SOLO_PCI_ERR_FSM2(__s)		(((__s) >> 24) & 0x1f)
+
+#define SOLO_P2M_BASE				0x0080
+
+#define SOLO_P2M_CONFIG(n)			(0x0080 + ((n)*0x20))
+#define	  SOLO_P2M_DMA_INTERVAL(n)		((n)<<6)/* N*32 clocks */
+#define	  SOLO_P2M_CSC_BYTE_REORDER		(1<<5)	/* BGR -> RGB */
+/* 0:r=[14:10] g=[9:5] b=[4:0], 1:r=[15:11] g=[10:5] b=[4:0] */
+#define	  SOLO_P2M_CSC_16BIT_565		(1<<4)
+#define	  SOLO_P2M_UV_SWAP			(1<<3)
+#define	  SOLO_P2M_PCI_MASTER_MODE		(1<<2)
+#define	  SOLO_P2M_DESC_INTR_OPT		(1<<1)	/* 1:Empty, 0:Each */
+#define	  SOLO_P2M_DESC_MODE			(1<<0)
+
+#define SOLO_P2M_DES_ADR(n)			(0x0084 + ((n)*0x20))
+
+#define SOLO_P2M_DESC_ID(n)			(0x0088 + ((n)*0x20))
+#define	  SOLO_P2M_UPDATE_ID(n)			((n)<<0)
+
+#define SOLO_P2M_STATUS(n)			(0x008C + ((n)*0x20))
+#define	  SOLO_P2M_COMMAND_DONE			(1<<8)
+#define	  SOLO_P2M_CURRENT_ID(stat)		(0xff & (stat))
+
+#define SOLO_P2M_CONTROL(n)			(0x0090 + ((n)*0x20))
+#define	  SOLO_P2M_PCI_INC(n)			((n)<<20)
+#define	  SOLO_P2M_REPEAT(n)			((n)<<10)
+/* 0:512, 1:256, 2:128, 3:64, 4:32, 5:128(2page) */
+#define	  SOLO_P2M_BURST_SIZE(n)		((n)<<7)
+#define	    SOLO_P2M_BURST_512			0
+#define	    SOLO_P2M_BURST_256			1
+#define	    SOLO_P2M_BURST_128			2
+#define	    SOLO_P2M_BURST_64			3
+#define	    SOLO_P2M_BURST_32			4
+#define	  SOLO_P2M_CSC_16BIT			(1<<6)	/* 0:24bit, 1:16bit */
+/* 0:Y[0]<-0(OFF), 1:Y[0]<-1(ON), 2:Y[0]<-G[0], 3:Y[0]<-Bit[15] */
+#define	  SOLO_P2M_ALPHA_MODE(n)		((n)<<4)
+#define	  SOLO_P2M_CSC_ON			(1<<3)
+#define	  SOLO_P2M_INTERRUPT_REQ		(1<<2)
+#define	  SOLO_P2M_WRITE			(1<<1)
+#define	  SOLO_P2M_TRANS_ON			(1<<0)
+
+#define SOLO_P2M_EXT_CFG(n)			(0x0094 + ((n)*0x20))
+#define	  SOLO_P2M_EXT_INC(n)			((n)<<20)
+#define	  SOLO_P2M_COPY_SIZE(n)			((n)<<0)
+
+#define SOLO_P2M_TAR_ADR(n)			(0x0098 + ((n)*0x20))
+
+#define SOLO_P2M_EXT_ADR(n)			(0x009C + ((n)*0x20))
+
+#define SOLO_P2M_BUFFER(i)			(0x2000 + ((i)*4))
+
+#define SOLO_VI_CH_SWITCH_0			0x0100
+#define SOLO_VI_CH_SWITCH_1			0x0104
+#define SOLO_VI_CH_SWITCH_2			0x0108
+
+#define	SOLO_VI_CH_ENA				0x010C
+#define	SOLO_VI_CH_FORMAT			0x0110
+#define	  SOLO_VI_FD_SEL_MASK(n)		((n)<<16)
+#define	  SOLO_VI_PROG_MASK(n)			((n)<<0)
+
+#define SOLO_VI_FMT_CFG				0x0114
+#define	  SOLO_VI_FMT_CHECK_VCOUNT		(1<<31)
+#define	  SOLO_VI_FMT_CHECK_HCOUNT		(1<<30)
+#define   SOLO_VI_FMT_TEST_SIGNAL		(1<<28)
+
+#define	SOLO_VI_PAGE_SW				0x0118
+#define	  SOLO_FI_INV_DISP_LIVE(n)		((n)<<8)
+#define	  SOLO_FI_INV_DISP_OUT(n)		((n)<<7)
+#define	  SOLO_DISP_SYNC_FI(n)			((n)<<6)
+#define	  SOLO_PIP_PAGE_ADD(n)			((n)<<3)
+#define	  SOLO_NORMAL_PAGE_ADD(n)		((n)<<0)
+
+#define	SOLO_VI_ACT_I_P				0x011C
+#define	SOLO_VI_ACT_I_S				0x0120
+#define	SOLO_VI_ACT_P				0x0124
+#define	  SOLO_VI_FI_INVERT			(1<<31)
+#define	  SOLO_VI_H_START(n)			((n)<<21)
+#define	  SOLO_VI_V_START(n)			((n)<<11)
+#define	  SOLO_VI_V_STOP(n)			((n)<<0)
+
+#define SOLO_VI_STATUS0				0x0128
+#define   SOLO_VI_STATUS0_PAGE(__n)		((__n) & 0x07)
+#define SOLO_VI_STATUS1				0x012C
+
+/* XXX: Might be better off in kernel level disp.h */
+#define DISP_PAGE(stat)				((stat) & 0x07)
+
+#define SOLO_VI_PB_CONFIG			0x0130
+#define	  SOLO_VI_PB_USER_MODE			(1<<1)
+#define	  SOLO_VI_PB_PAL			(1<<0)
+#define SOLO_VI_PB_RANGE_HV			0x0134
+#define	  SOLO_VI_PB_HSIZE(h)			((h)<<12)
+#define	  SOLO_VI_PB_VSIZE(v)			((v)<<0)
+#define SOLO_VI_PB_ACT_H			0x0138
+#define	  SOLO_VI_PB_HSTART(n)			((n)<<12)
+#define	  SOLO_VI_PB_HSTOP(n)			((n)<<0)
+#define SOLO_VI_PB_ACT_V			0x013C
+#define	  SOLO_VI_PB_VSTART(n)			((n)<<12)
+#define	  SOLO_VI_PB_VSTOP(n)			((n)<<0)
+
+#define	SOLO_VI_MOSAIC(ch)			(0x0140 + ((ch)*4))
+#define	  SOLO_VI_MOSAIC_SX(x)			((x)<<24)
+#define	  SOLO_VI_MOSAIC_EX(x)			((x)<<16)
+#define	  SOLO_VI_MOSAIC_SY(x)			((x)<<8)
+#define	  SOLO_VI_MOSAIC_EY(x)			((x)<<0)
+
+#define	SOLO_VI_WIN_CTRL0(ch)			(0x0180 + ((ch)*4))
+#define	SOLO_VI_WIN_CTRL1(ch)			(0x01C0 + ((ch)*4))
+
+#define	  SOLO_VI_WIN_CHANNEL(n)		((n)<<28)
+
+#define	  SOLO_VI_WIN_PIP(n)			((n)<<27)
+#define	  SOLO_VI_WIN_SCALE(n)			((n)<<24)
+
+#define	  SOLO_VI_WIN_SX(x)			((x)<<12)
+#define	  SOLO_VI_WIN_EX(x)			((x)<<0)
+
+#define	  SOLO_VI_WIN_SY(x)			((x)<<12)
+#define	  SOLO_VI_WIN_EY(x)			((x)<<0)
+
+#define	SOLO_VI_WIN_ON(ch)			(0x0200 + ((ch)*4))
+
+#define SOLO_VI_WIN_SW				0x0240
+#define SOLO_VI_WIN_LIVE_AUTO_MUTE		0x0244
+
+#define	SOLO_VI_MOT_ADR				0x0260
+#define	  SOLO_VI_MOTION_EN(mask)		((mask)<<16)
+#define	SOLO_VI_MOT_CTRL			0x0264
+#define	  SOLO_VI_MOTION_FRAME_COUNT(n)		((n)<<24)
+#define	  SOLO_VI_MOTION_SAMPLE_LENGTH(n)	((n)<<16)
+#define	  SOLO_VI_MOTION_INTR_START_STOP	(1<<15)
+#define	  SOLO_VI_MOTION_FREEZE_DATA		(1<<14)
+#define	  SOLO_VI_MOTION_SAMPLE_COUNT(n)	((n)<<0)
+#define SOLO_VI_MOT_CLEAR			0x0268
+#define SOLO_VI_MOT_STATUS			0x026C
+#define	  SOLO_VI_MOTION_CNT(n)			((n)<<0)
+#define SOLO_VI_MOTION_BORDER			0x0270
+#define SOLO_VI_MOTION_BAR			0x0274
+#define	  SOLO_VI_MOTION_Y_SET			(1<<29)
+#define	  SOLO_VI_MOTION_Y_ADD			(1<<28)
+#define	  SOLO_VI_MOTION_CB_SET			(1<<27)
+#define	  SOLO_VI_MOTION_CB_ADD			(1<<26)
+#define	  SOLO_VI_MOTION_CR_SET			(1<<25)
+#define	  SOLO_VI_MOTION_CR_ADD			(1<<24)
+#define	  SOLO_VI_MOTION_Y_VALUE(v)		((v)<<16)
+#define	  SOLO_VI_MOTION_CB_VALUE(v)		((v)<<8)
+#define	  SOLO_VI_MOTION_CR_VALUE(v)		((v)<<0)
+
+#define	SOLO_VO_FMT_ENC				0x0300
+#define	  SOLO_VO_SCAN_MODE_PROGRESSIVE		(1<<31)
+#define	  SOLO_VO_FMT_TYPE_PAL			(1<<30)
+#define   SOLO_VO_FMT_TYPE_NTSC			0
+#define	  SOLO_VO_USER_SET			(1<<29)
+
+#define	  SOLO_VO_FI_CHANGE			(1<<20)
+#define	  SOLO_VO_USER_COLOR_SET_VSYNC		(1<<19)
+#define	  SOLO_VO_USER_COLOR_SET_HSYNC		(1<<18)
+#define	  SOLO_VO_USER_COLOR_SET_NAV		(1<<17)
+#define	  SOLO_VO_USER_COLOR_SET_NAH		(1<<16)
+#define	  SOLO_VO_NA_COLOR_Y(Y)			((Y)<<8)
+#define	  SOLO_VO_NA_COLOR_CB(CB)		(((CB)/16)<<4)
+#define	  SOLO_VO_NA_COLOR_CR(CR)		(((CR)/16)<<0)
+
+#define	SOLO_VO_ACT_H				0x0304
+#define	  SOLO_VO_H_BLANK(n)			((n)<<22)
+#define	  SOLO_VO_H_START(n)			((n)<<11)
+#define	  SOLO_VO_H_STOP(n)			((n)<<0)
+
+#define	SOLO_VO_ACT_V				0x0308
+#define	  SOLO_VO_V_BLANK(n)			((n)<<22)
+#define	  SOLO_VO_V_START(n)			((n)<<11)
+#define	  SOLO_VO_V_STOP(n)			((n)<<0)
+
+#define	SOLO_VO_RANGE_HV			0x030C
+#define	  SOLO_VO_SYNC_INVERT			(1<<24)
+#define	  SOLO_VO_HSYNC_INVERT			(1<<23)
+#define	  SOLO_VO_VSYNC_INVERT			(1<<22)
+#define	  SOLO_VO_H_LEN(n)			((n)<<11)
+#define	  SOLO_VO_V_LEN(n)			((n)<<0)
+
+#define	SOLO_VO_DISP_CTRL			0x0310
+#define	  SOLO_VO_DISP_ON			(1<<31)
+#define	  SOLO_VO_DISP_ERASE_COUNT(n)		((n&0xf)<<24)
+#define	  SOLO_VO_DISP_DOUBLE_SCAN		(1<<22)
+#define	  SOLO_VO_DISP_SINGLE_PAGE		(1<<21)
+#define	  SOLO_VO_DISP_BASE(n)			(((n)>>16) & 0xffff)
+
+#define SOLO_VO_DISP_ERASE			0x0314
+#define	  SOLO_VO_DISP_ERASE_ON			(1<<0)
+
+#define	SOLO_VO_ZOOM_CTRL			0x0318
+#define	  SOLO_VO_ZOOM_VER_ON			(1<<24)
+#define	  SOLO_VO_ZOOM_HOR_ON			(1<<23)
+#define	  SOLO_VO_ZOOM_V_COMP			(1<<22)
+#define	  SOLO_VO_ZOOM_SX(h)			(((h)/2)<<11)
+#define	  SOLO_VO_ZOOM_SY(v)			(((v)/2)<<0)
+
+#define SOLO_VO_FREEZE_CTRL			0x031C
+#define	  SOLO_VO_FREEZE_ON			(1<<1)
+#define	  SOLO_VO_FREEZE_INTERPOLATION		(1<<0)
+
+#define	SOLO_VO_BKG_COLOR			0x0320
+#define	  SOLO_BG_Y(y)				((y)<<16)
+#define	  SOLO_BG_U(u)				((u)<<8)
+#define	  SOLO_BG_V(v)				((v)<<0)
+
+#define	SOLO_VO_DEINTERLACE			0x0324
+#define	  SOLO_VO_DEINTERLACE_THRESHOLD(n)	((n)<<8)
+#define	  SOLO_VO_DEINTERLACE_EDGE_VALUE(n)	((n)<<0)
+
+#define SOLO_VO_BORDER_LINE_COLOR		0x0330
+#define SOLO_VO_BORDER_FILL_COLOR		0x0334
+#define SOLO_VO_BORDER_LINE_MASK		0x0338
+#define SOLO_VO_BORDER_FILL_MASK		0x033c
+
+#define SOLO_VO_BORDER_X(n)			(0x0340+((n)*4))
+#define SOLO_VO_BORDER_Y(n)			(0x0354+((n)*4))
+
+#define SOLO_VO_CELL_EXT_SET			0x0368
+#define SOLO_VO_CELL_EXT_START			0x036c
+#define SOLO_VO_CELL_EXT_STOP			0x0370
+
+#define SOLO_VO_CELL_EXT_SET2			0x0374
+#define SOLO_VO_CELL_EXT_START2			0x0378
+#define SOLO_VO_CELL_EXT_STOP2			0x037c
+
+#define SOLO_VO_RECTANGLE_CTRL(n)		(0x0368+((n)*12))
+#define SOLO_VO_RECTANGLE_START(n)		(0x036c+((n)*12))
+#define SOLO_VO_RECTANGLE_STOP(n)		(0x0370+((n)*12))
+
+#define SOLO_VO_CURSOR_POS			(0x0380)
+#define SOLO_VO_CURSOR_CLR			(0x0384)
+#define SOLO_VO_CURSOR_CLR2			(0x0388)
+#define SOLO_VO_CURSOR_MASK(id)			(0x0390+((id)*4))
+
+#define SOLO_VO_EXPANSION(id)			(0x0250+((id)*4))
+
+#define	SOLO_OSG_CONFIG				0x03E0
+#define	  SOLO_VO_OSG_ON			(1<<31)
+#define	  SOLO_VO_OSG_COLOR_MUTE		(1<<28)
+#define	  SOLO_VO_OSG_ALPHA_RATE(n)		((n)<<22)
+#define	  SOLO_VO_OSG_ALPHA_BG_RATE(n)		((n)<<16)
+#define	  SOLO_VO_OSG_BASE(offset)		(((offset)>>16)&0xffff)
+
+#define SOLO_OSG_ERASE				0x03E4
+#define	  SOLO_OSG_ERASE_ON			(0x80)
+#define	  SOLO_OSG_ERASE_OFF			(0x00)
+
+#define SOLO_VO_OSG_BLINK			0x03E8
+#define	  SOLO_VO_OSG_BLINK_ON			(1<<1)
+#define	  SOLO_VO_OSG_BLINK_INTREVAL18		(1<<0)
+
+#define SOLO_CAP_BASE				0x0400
+#define	  SOLO_CAP_MAX_PAGE(n)			((n)<<16)
+#define	  SOLO_CAP_BASE_ADDR(n)			((n)<<0)
+#define SOLO_CAP_BTW				0x0404
+#define	  SOLO_CAP_PROG_BANDWIDTH(n)		((n)<<8)
+#define	  SOLO_CAP_MAX_BANDWIDTH(n)		((n)<<0)
+
+#define SOLO_DIM_SCALE1				0x0408
+#define SOLO_DIM_SCALE2				0x040C
+#define SOLO_DIM_SCALE3				0x0410
+#define SOLO_DIM_SCALE4				0x0414
+#define SOLO_DIM_SCALE5				0x0418
+#define	  SOLO_DIM_V_MB_NUM_FRAME(n)		((n)<<16)
+#define	  SOLO_DIM_V_MB_NUM_FIELD(n)		((n)<<8)
+#define	  SOLO_DIM_H_MB_NUM(n)			((n)<<0)
+
+#define SOLO_DIM_PROG				0x041C
+#define SOLO_CAP_STATUS				0x0420
+
+#define SOLO_CAP_CH_SCALE(ch)			(0x0440+((ch)*4))
+#define SOLO_CAP_CH_COMP_ENA_E(ch)		(0x0480+((ch)*4))
+#define SOLO_CAP_CH_INTV(ch)			(0x04C0+((ch)*4))
+#define SOLO_CAP_CH_INTV_E(ch)			(0x0500+((ch)*4))
+
+
+#define SOLO_VE_CFG0				0x0610
+#define	  SOLO_VE_TWO_PAGE_MODE			(1<<31)
+#define	  SOLO_VE_INTR_CTRL(n)			((n)<<24)
+#define	  SOLO_VE_BLOCK_SIZE(n)			((n)<<16)
+#define	  SOLO_VE_BLOCK_BASE(n)			((n)<<0)
+
+#define SOLO_VE_CFG1				0x0614
+#define	  SOLO_VE_BYTE_ALIGN(n)			((n)<<24)
+#define	  SOLO_VE_INSERT_INDEX			(1<<18)
+#define	  SOLO_VE_MOTION_MODE(n)		((n)<<16)
+#define	  SOLO_VE_MOTION_BASE(n)		((n)<<0)
+
+#define SOLO_VE_WMRK_POLY			0x061C
+#define SOLO_VE_VMRK_INIT_KEY			0x0620
+#define SOLO_VE_WMRK_STRL			0x0624
+#define SOLO_VE_ENCRYP_POLY			0x0628
+#define SOLO_VE_ENCRYP_INIT			0x062C
+#define SOLO_VE_ATTR				0x0630
+#define	  SOLO_VE_LITTLE_ENDIAN			(1<<31)
+#define	  SOLO_COMP_ATTR_RN			(1<<30)
+#define	  SOLO_COMP_ATTR_FCODE(n)		((n)<<27)
+#define	  SOLO_COMP_TIME_INC(n)			((n)<<25)
+#define	  SOLO_COMP_TIME_WIDTH(n)		((n)<<21)
+#define	  SOLO_DCT_INTERVAL(n)			((n)<<16)
+
+#define SOLO_VE_STATE(n)			(0x0640+((n)*4))
+struct videnc_status {
+	union {
+		u32 status0;
+		struct {
+			u32 mp4_enc_code_size:20, sad_motion:1, vid_motion:1,
+			    vop_type:2, video_channel:5, source_field_idx:1,
+			    interlace:1, progressive:1;
+		} status0_st;
+	};
+	union {
+		u32 status1;
+		struct {
+			u32 vsize:8, hsize:8, last_queue:4, foo1:8, scale:4;
+		} status1_st;
+	};
+	union {
+		u32 status4;
+		struct {
+			u32 jpeg_code_size:20, interval:10, foo1:2;
+		} status4_st;
+	};
+	union {
+		u32 status9;
+		struct {
+			u32 channel:5, foo1:27;
+		} status9_st;
+	};
+	union {
+		u32 status10;
+		struct {
+			u32 mp4_code_size:20, foo:12;
+		} status10_st;
+	};
+	union {
+		u32 status11;
+		struct {
+			u32 last_queue:8, foo1:24;
+		} status11_st;
+	};
+};
+
+#define SOLO_VE_JPEG_QP_TBL			0x0670
+#define SOLO_VE_JPEG_QP_CH_L			0x0674
+#define SOLO_VE_JPEG_QP_CH_H			0x0678
+#define SOLO_VE_JPEG_CFG			0x067C
+#define SOLO_VE_JPEG_CTRL			0x0680
+
+#define SOLO_VE_OSD_CH				0x0690
+#define SOLO_VE_OSD_BASE			0x0694
+#define SOLO_VE_OSD_CLR				0x0698
+#define SOLO_VE_OSD_OPT				0x069C
+
+#define SOLO_VE_CH_INTL(ch)			(0x0700+((ch)*4))
+#define SOLO_VE_CH_MOT(ch)			(0x0740+((ch)*4))
+#define SOLO_VE_CH_QP(ch)			(0x0780+((ch)*4))
+#define SOLO_VE_CH_QP_E(ch)			(0x07C0+((ch)*4))
+#define SOLO_VE_CH_GOP(ch)			(0x0800+((ch)*4))
+#define SOLO_VE_CH_GOP_E(ch)			(0x0840+((ch)*4))
+#define SOLO_VE_CH_REF_BASE(ch)			(0x0880+((ch)*4))
+#define SOLO_VE_CH_REF_BASE_E(ch)		(0x08C0+((ch)*4))
+
+#define SOLO_VE_MPEG4_QUE(n)			(0x0A00+((n)*8))
+#define SOLO_VE_JPEG_QUE(n)			(0x0A04+((n)*8))
+
+#define SOLO_VD_CFG0				0x0900
+#define	  SOLO_VD_CFG_NO_WRITE_NO_WINDOW	(1<<24)
+#define	  SOLO_VD_CFG_BUSY_WIAT_CODE		(1<<23)
+#define	  SOLO_VD_CFG_BUSY_WIAT_REF		(1<<22)
+#define	  SOLO_VD_CFG_BUSY_WIAT_RES		(1<<21)
+#define	  SOLO_VD_CFG_BUSY_WIAT_MS		(1<<20)
+#define	  SOLO_VD_CFG_SINGLE_MODE		(1<<18)
+#define	  SOLO_VD_CFG_SCAL_MANUAL		(1<<17)
+#define	  SOLO_VD_CFG_USER_PAGE_CTRL		(1<<16)
+#define	  SOLO_VD_CFG_LITTLE_ENDIAN		(1<<15)
+#define	  SOLO_VD_CFG_START_FI			(1<<14)
+#define	  SOLO_VD_CFG_ERR_LOCK			(1<<13)
+#define	  SOLO_VD_CFG_ERR_INT_ENA		(1<<12)
+#define	  SOLO_VD_CFG_TIME_WIDTH(n)		((n)<<8)
+#define	  SOLO_VD_CFG_DCT_INTERVAL(n)		((n)<<0)
+
+#define SOLO_VD_CFG1				0x0904
+
+#define	SOLO_VD_DEINTERLACE			0x0908
+#define	  SOLO_VD_DEINTERLACE_THRESHOLD(n)	((n)<<8)
+#define	  SOLO_VD_DEINTERLACE_EDGE_VALUE(n)	((n)<<0)
+
+#define SOLO_VD_CODE_ADR			0x090C
+
+#define SOLO_VD_CTRL				0x0910
+#define	  SOLO_VD_OPER_ON			(1<<31)
+#define	  SOLO_VD_MAX_ITEM(n)			((n)<<0)
+
+#define SOLO_VD_STATUS0				0x0920
+#define	  SOLO_VD_STATUS0_INTR_ACK		(1<<22)
+#define	  SOLO_VD_STATUS0_INTR_EMPTY		(1<<21)
+#define	  SOLO_VD_STATUS0_INTR_ERR		(1<<20)
+
+#define SOLO_VD_STATUS1				0x0924
+
+#define SOLO_VD_IDX0				0x0930
+#define	  SOLO_VD_IDX_INTERLACE			(1<<30)
+#define	  SOLO_VD_IDX_CHANNEL(n)		((n)<<24)
+#define	  SOLO_VD_IDX_SIZE(n)			((n)<<0)
+
+#define SOLO_VD_IDX1				0x0934
+#define	  SOLO_VD_IDX_SRC_SCALE(n)		((n)<<28)
+#define	  SOLO_VD_IDX_WINDOW(n)			((n)<<24)
+#define	  SOLO_VD_IDX_DEINTERLACE		(1<<16)
+#define	  SOLO_VD_IDX_H_BLOCK(n)		((n)<<8)
+#define	  SOLO_VD_IDX_V_BLOCK(n)		((n)<<0)
+
+#define SOLO_VD_IDX2				0x0938
+#define	  SOLO_VD_IDX_REF_BASE_SIDE		(1<<31)
+#define	  SOLO_VD_IDX_REF_BASE(n)		(((n)>>16)&0xffff)
+
+#define SOLO_VD_IDX3				0x093C
+#define	  SOLO_VD_IDX_DISP_SCALE(n)		((n)<<28)
+#define	  SOLO_VD_IDX_INTERLACE_WR		(1<<27)
+#define	  SOLO_VD_IDX_INTERPOL			(1<<26)
+#define	  SOLO_VD_IDX_HOR2X			(1<<25)
+#define	  SOLO_VD_IDX_OFFSET_X(n)		((n)<<12)
+#define	  SOLO_VD_IDX_OFFSET_Y(n)		((n)<<0)
+
+#define SOLO_VD_IDX4				0x0940
+#define	  SOLO_VD_IDX_DEC_WR_PAGE(n)		((n)<<8)
+#define	  SOLO_VD_IDX_DISP_RD_PAGE(n)		((n)<<0)
+
+#define SOLO_VD_WR_PAGE(n)			(0x03F0 + ((n) * 4))
+
+
+#define SOLO_GPIO_CONFIG_0			0x0B00
+#define SOLO_GPIO_CONFIG_1			0x0B04
+#define SOLO_GPIO_DATA_OUT			0x0B08
+#define SOLO_GPIO_DATA_IN			0x0B0C
+#define SOLO_GPIO_INT_ACK_STA			0x0B10
+#define SOLO_GPIO_INT_ENA			0x0B14
+#define SOLO_GPIO_INT_CFG_0			0x0B18
+#define SOLO_GPIO_INT_CFG_1			0x0B1C
+
+
+#define SOLO_IIC_CFG				0x0B20
+#define	  SOLO_IIC_ENABLE			(1<<8)
+#define	  SOLO_IIC_PRESCALE(n)			((n)<<0)
+
+#define SOLO_IIC_CTRL				0x0B24
+#define	  SOLO_IIC_AUTO_CLEAR			(1<<20)
+#define	  SOLO_IIC_STATE_RX_ACK			(1<<19)
+#define	  SOLO_IIC_STATE_BUSY			(1<<18)
+#define	  SOLO_IIC_STATE_SIG_ERR		(1<<17)
+#define	  SOLO_IIC_STATE_TRNS			(1<<16)
+#define	  SOLO_IIC_CH_SET(n)			((n)<<5)
+#define	  SOLO_IIC_ACK_EN			(1<<4)
+#define	  SOLO_IIC_START			(1<<3)
+#define	  SOLO_IIC_STOP				(1<<2)
+#define	  SOLO_IIC_READ				(1<<1)
+#define	  SOLO_IIC_WRITE			(1<<0)
+
+#define SOLO_IIC_TXD				0x0B28
+#define SOLO_IIC_RXD				0x0B2C
+
+/*
+ *	UART REGISTER
+ */
+#define SOLO_UART_CONTROL(n)			(0x0BA0 + ((n)*0x20))
+#define	  SOLO_UART_CLK_DIV(n)			((n)<<24)
+#define	  SOLO_MODEM_CTRL_EN			(1<<20)
+#define	  SOLO_PARITY_ERROR_DROP		(1<<18)
+#define	  SOLO_IRQ_ERR_EN			(1<<17)
+#define	  SOLO_IRQ_RX_EN			(1<<16)
+#define	  SOLO_IRQ_TX_EN			(1<<15)
+#define	  SOLO_RX_EN				(1<<14)
+#define	  SOLO_TX_EN				(1<<13)
+#define	  SOLO_UART_HALF_DUPLEX			(1<<12)
+#define	  SOLO_UART_LOOPBACK			(1<<11)
+
+#define	  SOLO_BAUDRATE_230400			((0<<9)|(0<<6))
+#define	  SOLO_BAUDRATE_115200			((0<<9)|(1<<6))
+#define	  SOLO_BAUDRATE_57600			((0<<9)|(2<<6))
+#define	  SOLO_BAUDRATE_38400			((0<<9)|(3<<6))
+#define	  SOLO_BAUDRATE_19200			((0<<9)|(4<<6))
+#define	  SOLO_BAUDRATE_9600			((0<<9)|(5<<6))
+#define	  SOLO_BAUDRATE_4800			((0<<9)|(6<<6))
+#define	  SOLO_BAUDRATE_2400			((1<<9)|(6<<6))
+#define	  SOLO_BAUDRATE_1200			((2<<9)|(6<<6))
+#define	  SOLO_BAUDRATE_300			((3<<9)|(6<<6))
+
+#define	  SOLO_UART_DATA_BIT_8			(3<<4)
+#define	  SOLO_UART_DATA_BIT_7			(2<<4)
+#define	  SOLO_UART_DATA_BIT_6			(1<<4)
+#define	  SOLO_UART_DATA_BIT_5			(0<<4)
+
+#define	  SOLO_UART_STOP_BIT_1			(0<<2)
+#define	  SOLO_UART_STOP_BIT_2			(1<<2)
+
+#define	  SOLO_UART_PARITY_NONE			(0<<0)
+#define	  SOLO_UART_PARITY_EVEN			(2<<0)
+#define	  SOLO_UART_PARITY_ODD			(3<<0)
+
+#define SOLO_UART_STATUS(n)			(0x0BA4 + ((n)*0x20))
+#define	  SOLO_UART_CTS				(1<<15)
+#define	  SOLO_UART_RX_BUSY			(1<<14)
+#define	  SOLO_UART_OVERRUN			(1<<13)
+#define	  SOLO_UART_FRAME_ERR			(1<<12)
+#define	  SOLO_UART_PARITY_ERR			(1<<11)
+#define	  SOLO_UART_TX_BUSY			(1<<5)
+
+#define	  SOLO_UART_RX_BUFF_CNT(stat)		(((stat)>>6) & 0x1f)
+#define	  SOLO_UART_RX_BUFF_SIZE		8
+#define	  SOLO_UART_TX_BUFF_CNT(stat)		(((stat)>>0) & 0x1f)
+#define	  SOLO_UART_TX_BUFF_SIZE		8
+
+#define SOLO_UART_TX_DATA(n)			(0x0BA8 + ((n)*0x20))
+#define	  SOLO_UART_TX_DATA_PUSH		(1<<8)
+#define SOLO_UART_RX_DATA(n)			(0x0BAC + ((n)*0x20))
+#define	  SOLO_UART_RX_DATA_POP			(1<<8)
+
+#define SOLO_TIMER_CLOCK_NUM			0x0be0
+#define SOLO_TIMER_WATCHDOG			0x0be4
+#define SOLO_TIMER_USEC				0x0be8
+#define SOLO_TIMER_SEC				0x0bec
+
+#define SOLO_AUDIO_CONTROL			0x0D00
+#define	  SOLO_AUDIO_ENABLE			(1<<31)
+#define	  SOLO_AUDIO_MASTER_MODE		(1<<30)
+#define	  SOLO_AUDIO_I2S_MODE			(1<<29)
+#define	  SOLO_AUDIO_I2S_LR_SWAP		(1<<27)
+#define	  SOLO_AUDIO_I2S_8BIT			(1<<26)
+#define	  SOLO_AUDIO_I2S_MULTI(n)		((n)<<24)
+#define	  SOLO_AUDIO_MIX_9TO0			(1<<23)
+#define	  SOLO_AUDIO_DEC_9TO0_VOL(n)		((n)<<20)
+#define	  SOLO_AUDIO_MIX_19TO10			(1<<19)
+#define	  SOLO_AUDIO_DEC_19TO10_VOL(n)		((n)<<16)
+#define	  SOLO_AUDIO_MODE(n)			((n)<<0)
+#define SOLO_AUDIO_SAMPLE			0x0D04
+#define	  SOLO_AUDIO_EE_MODE_ON			(1<<30)
+#define	  SOLO_AUDIO_EE_ENC_CH(ch)		((ch)<<25)
+#define	  SOLO_AUDIO_BITRATE(n)			((n)<<16)
+#define	  SOLO_AUDIO_CLK_DIV(n)			((n)<<0)
+#define SOLO_AUDIO_FDMA_INTR			0x0D08
+#define	  SOLO_AUDIO_FDMA_INTERVAL(n)		((n)<<19)
+#define	  SOLO_AUDIO_INTR_ORDER(n)		((n)<<16)
+#define	  SOLO_AUDIO_FDMA_BASE(n)		((n)<<0)
+#define SOLO_AUDIO_EVOL_0			0x0D0C
+#define SOLO_AUDIO_EVOL_1			0x0D10
+#define	  SOLO_AUDIO_EVOL(ch, value)		((value)<<((ch)%10))
+#define SOLO_AUDIO_STA				0x0D14
+
+
+#define SOLO_WATCHDOG				0x0BE4
+#define WATCHDOG_STAT(status)			(status<<8)
+#define WATCHDOG_TIME(sec)			(sec&0xff)
+
+#endif /* __SOLO6010_REGISTERS_H */
diff --git a/drivers/staging/solo6x10/solo6010-tw28.c b/drivers/staging/solo6x10/solo6010-tw28.c
new file mode 100644
index 00000000000..0159c839243
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-tw28.c
@@ -0,0 +1,823 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+
+#include "solo6010.h"
+#include "solo6010-tw28.h"
+
+/* XXX: Some of these values are masked into an 8-bit regs, and shifted
+ * around for other 8-bit regs. What are the magic bits in these values? */
+#define DEFAULT_HDELAY_NTSC		(32 - 4)
+#define DEFAULT_HACTIVE_NTSC		(720 + 16)
+#define DEFAULT_VDELAY_NTSC		(7 - 2)
+#define DEFAULT_VACTIVE_NTSC		(240 + 4)
+
+#define DEFAULT_HDELAY_PAL		(32 + 4)
+#define DEFAULT_HACTIVE_PAL		(864-DEFAULT_HDELAY_PAL)
+#define DEFAULT_VDELAY_PAL		(6)
+#define DEFAULT_VACTIVE_PAL		(312-DEFAULT_VDELAY_PAL)
+
+static u8 tbl_tw2864_template[] = {
+	0x00, 0x00, 0x80, 0x10, 0x80, 0x80, 0x00, 0x02, // 0x00
+	0x12, 0xf5, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0x00, 0x80, 0x10, 0x80, 0x80, 0x00, 0x02, // 0x10
+	0x12, 0xf5, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0x00, 0x80, 0x10, 0x80, 0x80, 0x00, 0x02, // 0x20
+	0x12, 0xf5, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0x00, 0x80, 0x10, 0x80, 0x80, 0x00, 0x02, // 0x30
+	0x12, 0xf5, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x40
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x50
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x60
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x70
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00,
+	0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, // 0x80
+	0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00,
+	0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, // 0x90
+	0x00, 0x28, 0x44, 0x44, 0xa0, 0x88, 0x5a, 0x01,
+	0x08, 0x08, 0x08, 0x08, 0x1a, 0x1a, 0x1a, 0x1a, // 0xa0
+	0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44,
+	0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, // 0xb0
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xc0
+	0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00,
+	0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, // 0xd0
+	0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
+	0x10, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, // 0xe0
+	0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+	0x83, 0xb5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, // 0xf0
+	0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00,
+};
+
+static u8 tbl_tw2865_ntsc_template[] = {
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, // 0x00
+	0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, // 0x10
+	0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, // 0x20
+	0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0xf0, 0x70, 0x48, 0x80, 0x80, 0x00, 0x02, // 0x30
+	0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+	0x00, 0x00, 0x90, 0x68, 0x00, 0x38, 0x80, 0x80, // 0x40
+	0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x50
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x60
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
+	0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, // 0x70
+	0xE9, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
+	0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, // 0x80
+	0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
+	0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, // 0x90
+	0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
+	0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1B, 0x1A, // 0xa0
+	0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
+	0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, // 0xb0
+	0xFF, 0xE7, 0xE9, 0xE9, 0xEB, 0xFF, 0xD6, 0xD8,
+	0xD8, 0xD7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xc0
+	0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
+	0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, // 0xd0
+	0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
+	0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, // 0xe0
+	0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+	0x83, 0xB5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, // 0xf0
+	0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
+};
+
+static u8 tbl_tw2865_pal_template[] = {
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, // 0x00
+	0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, // 0x10
+	0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, // 0x20
+	0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+	0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, // 0x30
+	0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+	0x00, 0x94, 0x90, 0x48, 0x00, 0x38, 0x7F, 0x80, // 0x40
+	0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x50
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x60
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
+	0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, // 0x70
+	0xEA, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
+	0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, // 0x80
+	0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
+	0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, // 0x90
+	0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
+	0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1A, // 0xa0
+	0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
+	0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, // 0xb0
+	0xFF, 0xE7, 0xE9, 0xE9, 0xE9, 0xFF, 0xD7, 0xD8,
+	0xD9, 0xD8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xc0
+	0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
+	0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, // 0xd0
+	0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
+	0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, // 0xe0
+	0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+	0x83, 0xB5, 0x09, 0x00, 0xA0, 0x00, 0x01, 0x20, // 0xf0
+	0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
+};
+
+#define is_tw286x(__solo, __id) (!(__solo->tw2815 & (1 << __id)))
+
+static u8 tw_readbyte(struct solo6010_dev *solo_dev, int chip_id, u8 tw6x_off,
+		      u8 tw_off)
+{
+	if (is_tw286x(solo_dev, chip_id))
+		return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+					 TW_CHIP_OFFSET_ADDR(chip_id),
+					 tw6x_off);
+	else
+		return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+					 TW_CHIP_OFFSET_ADDR(chip_id),
+					 tw_off);
+}
+
+static void tw_writebyte(struct solo6010_dev *solo_dev, int chip_id,
+			 u8 tw6x_off, u8 tw_off, u8 val)
+{
+	if (is_tw286x(solo_dev, chip_id))
+		solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+				   TW_CHIP_OFFSET_ADDR(chip_id),
+				   tw6x_off, val);
+	else
+		solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+				   TW_CHIP_OFFSET_ADDR(chip_id),
+				   tw_off, val);
+}
+
+static void tw_write_and_verify(struct solo6010_dev *solo_dev, u8 addr, u8 off,
+				u8 val)
+{
+	int i;
+
+	for (i = 0; i < 5; i++) {
+		u8 rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, addr, off);
+		if (rval == val)
+			return;
+
+		solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, addr, off, val);
+		msleep_interruptible(1);
+	}
+
+//	printk("solo6010/tw28: Error writing register: %02x->%02x [%02x]\n",
+//		addr, off, val);
+}
+
+static int tw2865_setup(struct solo6010_dev *solo_dev, u8 dev_addr)
+{
+	u8 tbl_tw2865_common[256];
+	int i;
+
+	if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL)
+		memcpy(tbl_tw2865_common, tbl_tw2865_pal_template,
+		       sizeof(tbl_tw2865_common));
+	else
+		memcpy(tbl_tw2865_common, tbl_tw2865_ntsc_template,
+		       sizeof(tbl_tw2865_common));
+
+	/* ALINK Mode */
+	if (solo_dev->nr_chans == 4) {
+		tbl_tw2865_common[0xd2] = 0x01;
+		tbl_tw2865_common[0xcf] = 0x00;
+	} else if (solo_dev->nr_chans == 8) {
+		tbl_tw2865_common[0xd2] = 0x02;
+		if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+			tbl_tw2865_common[0xcf] = 0x80;
+	} else if (solo_dev->nr_chans == 16) {
+		tbl_tw2865_common[0xd2] = 0x03;
+		if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+			tbl_tw2865_common[0xcf] = 0x83;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+			tbl_tw2865_common[0xcf] = 0x83;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+			tbl_tw2865_common[0xcf] = 0x80;
+	}
+
+	for (i = 0; i < 0xff; i++) {
+		/* Skip read only registers */
+		if (i >= 0xb8 && i <= 0xc1 )
+			continue;
+		if ((i & ~0x30) == 0x00 ||
+		    (i & ~0x30) == 0x0c ||
+		    (i & ~0x30) == 0x0d)
+			continue;
+		if (i >= 0xc4 && i <= 0xc7)
+			continue;
+		if (i == 0xfd)
+			continue;
+
+		tw_write_and_verify(solo_dev, dev_addr, i,
+				    tbl_tw2865_common[i]);
+	}
+
+	return 0;
+}
+
+static int tw2864_setup(struct solo6010_dev *solo_dev, u8 dev_addr)
+{
+	u8 tbl_tw2864_common[sizeof(tbl_tw2864_template)];
+	int i;
+
+	memcpy(tbl_tw2864_common, tbl_tw2864_template,
+	       sizeof(tbl_tw2864_common));
+
+	if (solo_dev->tw2865 == 0) {
+		/* IRQ Mode */
+		if (solo_dev->nr_chans == 4) {
+			tbl_tw2864_common[0xd2] = 0x01;
+			tbl_tw2864_common[0xcf] = 0x00;
+		} else if (solo_dev->nr_chans == 8) {
+			tbl_tw2864_common[0xd2] = 0x02;
+			if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+				tbl_tw2864_common[0xcf] = 0x43;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+				tbl_tw2864_common[0xcf] = 0x40;
+		} else if (solo_dev->nr_chans == 16) {
+			tbl_tw2864_common[0xd2] = 0x03;
+			if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+				tbl_tw2864_common[0xcf] = 0x43;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+				tbl_tw2864_common[0xcf] = 0x43;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+				tbl_tw2864_common[0xcf] = 0x43;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+				tbl_tw2864_common[0xcf] = 0x40;
+		}
+	} else {
+		/* ALINK Mode. Assumes that the first tw28xx is a
+		 * 2865 and these are in cascade. */
+		for (i = 0; i <= 4; i++)
+			tbl_tw2864_common[0x08 | i << 4] = 0x12;
+
+		if (solo_dev->nr_chans == 8) {
+			tbl_tw2864_common[0xd2] = 0x02;
+			if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+				tbl_tw2864_common[0xcf] = 0x80;
+		} else if (solo_dev->nr_chans == 16) {
+			tbl_tw2864_common[0xd2] = 0x03;
+			if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+				tbl_tw2864_common[0xcf] = 0x83;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+				tbl_tw2864_common[0xcf] = 0x83;
+			else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+				tbl_tw2864_common[0xcf] = 0x80;
+		}
+	}
+
+	/* NTSC or PAL */
+	if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL) {
+		for (i = 0; i < 4; i++) {
+			tbl_tw2864_common[0x07 | (i << 4)] |= 0x10;
+			tbl_tw2864_common[0x08 | (i << 4)] |= 0x06;
+			tbl_tw2864_common[0x0a | (i << 4)] |= 0x08;
+			tbl_tw2864_common[0x0b | (i << 4)] |= 0x13;
+			tbl_tw2864_common[0x0e | (i << 4)] |= 0x01;
+		}
+		tbl_tw2864_common[0x9d] = 0x90;
+		tbl_tw2864_common[0xf3] = 0x00;
+		tbl_tw2864_common[0xf4] = 0xa0;
+	}
+
+	for (i = 0; i < 0xff; i++) {
+		/* Skip read only registers */
+		if (i >= 0xb8 && i <= 0xc1 )
+			continue;
+		if ((i & ~0x30) == 0x00 ||
+		    (i & ~0x30) == 0x0c ||
+		    (i & ~0x30) == 0x0d)
+			continue;
+		if (i == 0x74 || i == 0x77 || i == 0x78 ||
+		    i == 0x79 || i == 0x7a)
+			continue;
+		if (i == 0xfd)
+			continue;
+
+		tw_write_and_verify(solo_dev, dev_addr, i,
+				    tbl_tw2864_common[i]);
+	}
+
+	return 0;
+}
+
+static int tw2815_setup(struct solo6010_dev *solo_dev, u8 dev_addr)
+{
+	u8 tbl_ntsc_tw2815_common[] = {
+		0x00, 0xc8, 0x20, 0xd0, 0x06, 0xf0, 0x08, 0x80,
+		0x80, 0x80, 0x80, 0x02, 0x06, 0x00, 0x11,
+	};
+
+	u8 tbl_pal_tw2815_common[] = {
+		0x00, 0x88, 0x20, 0xd0, 0x05, 0x20, 0x28, 0x80,
+		0x80, 0x80, 0x80, 0x82, 0x06, 0x00, 0x11,
+	};
+
+	u8 tbl_tw2815_sfr[] = {
+		0x00, 0x00, 0x00, 0xc0, 0x45, 0xa0, 0xd0, 0x2f, // 0x00
+		0x64, 0x80, 0x80, 0x82, 0x82, 0x00, 0x00, 0x00,
+		0x00, 0x0f, 0x05, 0x00, 0x00, 0x80, 0x06, 0x00, // 0x10
+		0x00, 0x00, 0x00, 0xff, 0x8f, 0x00, 0x00, 0x00,
+		0x88, 0x88, 0xc0, 0x00, 0x20, 0x64, 0xa8, 0xec, // 0x20
+		0x31, 0x75, 0xb9, 0xfd, 0x00, 0x00, 0x88, 0x88,
+		0x88, 0x11, 0x00, 0x88, 0x88, 0x00,		// 0x30
+	};
+	u8 *tbl_tw2815_common;
+	int i;
+	int ch;
+
+	tbl_ntsc_tw2815_common[0x06] = 0;
+
+	/* Horizontal Delay Control */
+	tbl_ntsc_tw2815_common[0x02] = DEFAULT_HDELAY_NTSC & 0xff;
+	tbl_ntsc_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_NTSC >> 8);
+
+	/* Horizontal Active Control */
+	tbl_ntsc_tw2815_common[0x03] = DEFAULT_HACTIVE_NTSC & 0xff;
+	tbl_ntsc_tw2815_common[0x06] |=
+		((0x03 & (DEFAULT_HACTIVE_NTSC >> 8)) << 2);
+
+	/* Vertical Delay Control */
+	tbl_ntsc_tw2815_common[0x04] = DEFAULT_VDELAY_NTSC & 0xff;
+	tbl_ntsc_tw2815_common[0x06] |=
+		((0x01 & (DEFAULT_VDELAY_NTSC >> 8)) << 4);
+
+	/* Vertical Active Control */
+	tbl_ntsc_tw2815_common[0x05] = DEFAULT_VACTIVE_NTSC & 0xff;
+	tbl_ntsc_tw2815_common[0x06] |=
+		((0x01 & (DEFAULT_VACTIVE_NTSC >> 8)) << 5);
+
+	tbl_pal_tw2815_common[0x06] = 0;
+
+	/* Horizontal Delay Control */
+	tbl_pal_tw2815_common[0x02] = DEFAULT_HDELAY_PAL & 0xff;
+	tbl_pal_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_PAL >> 8);
+
+	/* Horizontal Active Control */
+	tbl_pal_tw2815_common[0x03] = DEFAULT_HACTIVE_PAL & 0xff;
+	tbl_pal_tw2815_common[0x06] |=
+		((0x03 & (DEFAULT_HACTIVE_PAL >> 8)) << 2);
+
+	/* Vertical Delay Control */
+	tbl_pal_tw2815_common[0x04] = DEFAULT_VDELAY_PAL & 0xff;
+	tbl_pal_tw2815_common[0x06] |=
+		((0x01 & (DEFAULT_VDELAY_PAL >> 8)) << 4);
+
+	/* Vertical Active Control */
+	tbl_pal_tw2815_common[0x05] = DEFAULT_VACTIVE_PAL & 0xff;
+	tbl_pal_tw2815_common[0x06] |=
+		((0x01 & (DEFAULT_VACTIVE_PAL >> 8)) << 5);
+
+	tbl_tw2815_common =
+	    (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) ?
+	     tbl_ntsc_tw2815_common : tbl_pal_tw2815_common;
+
+	/* Dual ITU-R BT.656 format */
+	tbl_tw2815_common[0x0d] |= 0x04;
+
+	/* Audio configuration */
+	tbl_tw2815_sfr[0x62 - 0x40] &= ~(3 << 6);
+
+	if (solo_dev->nr_chans == 4) {
+		tbl_tw2815_sfr[0x63 - 0x40] |= 1;
+		tbl_tw2815_sfr[0x62 - 0x40] |= 3 << 6;
+	} else if (solo_dev->nr_chans == 8) {
+		tbl_tw2815_sfr[0x63 - 0x40] |= 2;
+		if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
+	} else if (solo_dev->nr_chans == 16) {
+		tbl_tw2815_sfr[0x63 - 0x40] |= 3;
+		if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
+		else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+			tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
+	}
+
+	/* Output mode of R_ADATM pin (0 mixing, 1 record) */
+	/* tbl_tw2815_sfr[0x63 - 0x40] |= 0 << 2; */
+
+	/* 8KHz, used to be 16KHz, but changed for remote client compat */
+	tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 2;
+	tbl_tw2815_sfr[0x6c - 0x40] |= 0 << 2;
+
+	/* Playback of right channel */
+	tbl_tw2815_sfr[0x6c - 0x40] |= 1 << 5;
+
+	/* Reserved value (XXX ??) */
+	tbl_tw2815_sfr[0x5c - 0x40] |= 1 << 5;
+
+	/* Analog output gain and mix ratio playback on full */
+	tbl_tw2815_sfr[0x70 - 0x40] |= 0xff;
+	/* Select playback audio and mute all except */
+	tbl_tw2815_sfr[0x71 - 0x40] |= 0x10;
+	tbl_tw2815_sfr[0x6d - 0x40] |= 0x0f;
+
+	/* End of audio configuration */
+
+	for (ch = 0; ch < 4; ch++) {
+		tbl_tw2815_common[0x0d] &= ~3;
+		switch (ch) {
+		case 0:
+			tbl_tw2815_common[0x0d] |= 0x21;
+			break;
+		case 1:
+			tbl_tw2815_common[0x0d] |= 0x20;
+			break;
+		case 2:
+			tbl_tw2815_common[0x0d] |= 0x23;
+			break;
+		case 3:
+			tbl_tw2815_common[0x0d] |= 0x22;
+			break;
+		}
+
+		for (i = 0; i < 0x0f; i++) {
+			if (i == 0x00)
+				continue;	// read-only
+			solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+					   dev_addr, (ch * 0x10) + i,
+					   tbl_tw2815_common[i]);
+		}
+	}
+
+	for (i = 0x40; i < 0x76; i++) {
+		/* Skip read-only and nop registers */
+		if (i == 0x40 || i == 0x59 || i == 0x5a ||
+		    i == 0x5d || i == 0x5e || i == 0x5f)
+			continue;
+
+		solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, dev_addr, i,
+				       tbl_tw2815_sfr[i - 0x40]);
+	}
+
+	return 0;
+}
+
+#define FIRST_ACTIVE_LINE	0x0008
+#define LAST_ACTIVE_LINE	0x0102
+
+static void saa7128_setup(struct solo6010_dev *solo_dev)
+{
+	int i;
+	unsigned char regs[128] = {
+		0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x1C, 0x2B, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00,
+		0x59, 0x1d, 0x75, 0x3f, 0x06, 0x3f, 0x00, 0x00,
+		0x1c, 0x33, 0x00, 0x3f, 0x00, 0x00, 0x3f, 0x00,
+		0x1a, 0x1a, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00,
+		0x00, 0x00, 0x00, 0x68, 0x10, 0x97, 0x4c, 0x18,
+		0x9b, 0x93, 0x9f, 0xff, 0x7c, 0x34, 0x3f, 0x3f,
+		0x3f, 0x83, 0x83, 0x80, 0x0d, 0x0f, 0xc3, 0x06,
+		0x02, 0x80, 0x71, 0x77, 0xa7, 0x67, 0x66, 0x2e,
+		0x7b, 0x11, 0x4f, 0x1f, 0x7c, 0xf0, 0x21, 0x77,
+		0x41, 0x88, 0x41, 0x12, 0xed, 0x10, 0x10, 0x00,
+		0x41, 0xc3, 0x00, 0x3e, 0xb8, 0x02, 0x00, 0x00,
+		0x00, 0x00, 0x08, 0xff, 0x80, 0x00, 0xff, 0xff,
+	};
+
+	regs[0x7A] = FIRST_ACTIVE_LINE & 0xff;
+	regs[0x7B] = LAST_ACTIVE_LINE & 0xff;
+	regs[0x7C] = ((1 << 7) |
+			(((LAST_ACTIVE_LINE >> 8) & 1) << 6) |
+			(((FIRST_ACTIVE_LINE >> 8) & 1) << 4));
+
+	/* PAL: XXX: We could do a second set of regs to avoid this */
+	if (solo_dev->video_type != SOLO_VO_FMT_TYPE_NTSC) {
+		regs[0x28] = 0xE1;
+
+		regs[0x5A] = 0x0F;
+		regs[0x61] = 0x02;
+		regs[0x62] = 0x35;
+		regs[0x63] = 0xCB;
+		regs[0x64] = 0x8A;
+		regs[0x65] = 0x09;
+		regs[0x66] = 0x2A;
+
+		regs[0x6C] = 0xf1;
+		regs[0x6E] = 0x20;
+
+		regs[0x7A] = 0x06 + 12;
+		regs[0x7b] = 0x24 + 12;
+		regs[0x7c] |= 1 << 6;
+	}
+
+	/* First 0x25 bytes are read-only? */
+	for (i = 0x26; i < 128; i++) {
+		if (i == 0x60 || i == 0x7D)
+			continue;
+		solo_i2c_writebyte(solo_dev, SOLO_I2C_SAA, 0x46, i, regs[i]);
+	}
+
+	return;
+}
+
+int solo_tw28_init(struct solo6010_dev *solo_dev)
+{
+	int i;
+	u8 value;
+
+	/* Detect techwell chip type */
+	for (i = 0; i < TW_NUM_CHIP; i++) {
+		value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+					  TW_CHIP_OFFSET_ADDR(i), 0xFF);
+
+		switch (value >> 3) {
+		case 0x18:
+			solo_dev->tw2865 |= 1 << i;
+			solo_dev->tw28_cnt++;
+			break;
+		case 0x0c:
+			solo_dev->tw2864 |= 1 << i;
+			solo_dev->tw28_cnt++;
+			break;
+		default:
+			value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+						  TW_CHIP_OFFSET_ADDR(i), 0x59);
+			if ((value >> 3) == 0x04) {
+				solo_dev->tw2815 |= 1 << i;
+				solo_dev->tw28_cnt++;
+			}
+		}
+	}
+
+	if (!solo_dev->tw28_cnt)
+		return -EINVAL;
+
+	saa7128_setup(solo_dev);
+
+	for (i = 0; i < solo_dev->tw28_cnt; i++) {
+		if ((solo_dev->tw2865 & (1 << i)))
+			tw2865_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+		else if ((solo_dev->tw2864 & (1 << i)))
+			tw2864_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+		else
+			tw2815_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+	}
+
+	dev_info(&solo_dev->pdev->dev, "Initialized %d tw28xx chip%s:",
+		 solo_dev->tw28_cnt, solo_dev->tw28_cnt == 1 ? "" : "s");
+
+	if (solo_dev->tw2865)
+		printk(" tw2865[%d]", hweight32(solo_dev->tw2865));
+	if (solo_dev->tw2864)
+		printk(" tw2864[%d]", hweight32(solo_dev->tw2864));
+	if (solo_dev->tw2815)
+		printk(" tw2815[%d]", hweight32(solo_dev->tw2815));
+	printk("\n");
+
+	return 0;
+}
+
+/* 
+ * We accessed the video status signal in the Techwell chip through
+ * iic/i2c because the video status reported by register REG_VI_STATUS1
+ * (address 0x012C) of the SOLO6010 chip doesn't give the correct video
+ * status signal values.
+ */
+int tw28_get_video_status(struct solo6010_dev *solo_dev, u8 ch)
+{
+	u8 val, chip_num;
+
+	/* Get the right chip and on-chip channel */
+	chip_num = ch / 4;
+	ch %= 4;
+
+	val = tw_readbyte(solo_dev, chip_num, TW286X_AV_STAT_ADDR,
+			  TW_AV_STAT_ADDR) & 0x0f;
+
+	return val & (1 << ch) ? 1 : 0;
+}
+
+#if 0
+/* Status of audio from up to 4 techwell chips are combined into 1 variable.
+ * See techwell datasheet for details. */
+u16 tw28_get_audio_status(struct solo6010_dev *solo_dev)
+{
+	u8 val;
+	u16 status = 0;
+	int i;
+
+	for (i = 0; i < solo_dev->tw28_cnt; i++) {
+		val = (tw_readbyte(solo_dev, i, TW286X_AV_STAT_ADDR,
+				   TW_AV_STAT_ADDR) & 0xf0) >> 4;
+		status |= val << (i * 4);
+	}
+
+	return status;
+}
+#endif
+
+int tw28_set_ctrl_val(struct solo6010_dev *solo_dev, u32 ctrl, u8 ch,
+		      s32 val)
+{
+	char sval;
+	u8 chip_num;
+
+	/* Get the right chip and on-chip channel */
+	chip_num = ch / 4;
+	ch %= 4;
+
+	if (val > 255 || val < 0)
+		return -ERANGE;
+
+	switch (ctrl) {
+	case V4L2_CID_SHARPNESS:
+		/* Only 286x has sharpness */
+		if (val > 0x0f || val < 0)
+			return -ERANGE;
+		if (is_tw286x(solo_dev, chip_num)) {
+			u8 v = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+						 TW_CHIP_OFFSET_ADDR(chip_num),
+						 TW286x_SHARPNESS(chip_num));
+			v &= 0xf0;
+			v |= val;
+			solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+					   TW_CHIP_OFFSET_ADDR(chip_num),
+					   TW286x_SHARPNESS(chip_num), v);
+		} else if (val != 0)
+			return -ERANGE;
+		break;
+
+	case V4L2_CID_HUE:
+		if (is_tw286x(solo_dev, chip_num))
+			sval = val - 128;
+		else
+			sval = (char)val;
+		tw_writebyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
+			     TW_HUE_ADDR(ch), sval);
+
+		break;
+
+	case V4L2_CID_SATURATION:
+		if (is_tw286x(solo_dev, chip_num)) {
+			solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+					   TW_CHIP_OFFSET_ADDR(chip_num),
+					   TW286x_SATURATIONU_ADDR(ch), val);
+		}
+		tw_writebyte(solo_dev, chip_num, TW286x_SATURATIONV_ADDR(ch),
+			     TW_SATURATION_ADDR(ch), val);
+
+		break;
+
+	case V4L2_CID_CONTRAST:
+		tw_writebyte(solo_dev, chip_num, TW286x_CONTRAST_ADDR(ch),
+			     TW_CONTRAST_ADDR(ch), val);
+		break;
+
+	case V4L2_CID_BRIGHTNESS:
+		if (is_tw286x(solo_dev, chip_num))
+			sval = val - 128;
+		else
+			sval = (char)val;
+		tw_writebyte(solo_dev, chip_num, TW286x_BRIGHTNESS_ADDR(ch),
+			     TW_BRIGHTNESS_ADDR(ch), sval);
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int tw28_get_ctrl_val(struct solo6010_dev *solo_dev, u32 ctrl, u8 ch,
+		      s32 *val)
+{
+	u8 rval, chip_num;
+
+	/* Get the right chip and on-chip channel */
+	chip_num = ch / 4;
+	ch %= 4;
+
+	switch (ctrl) {
+	case V4L2_CID_SHARPNESS:
+		/* Only 286x has sharpness */
+		if (is_tw286x(solo_dev, chip_num)) {
+			rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+						 TW_CHIP_OFFSET_ADDR(chip_num),
+						 TW286x_SHARPNESS(chip_num));
+			*val = rval & 0x0f;
+		} else
+			*val = 0;
+		break;
+	case V4L2_CID_HUE:
+		rval = tw_readbyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
+				   TW_HUE_ADDR(ch));
+		if (is_tw286x(solo_dev, chip_num))
+			*val = (s32)((char)rval) + 128;
+		else
+			*val = rval;
+		break;
+	case V4L2_CID_SATURATION:
+		*val = tw_readbyte(solo_dev, chip_num,
+				   TW286x_SATURATIONU_ADDR(ch),
+				   TW_SATURATION_ADDR(ch));
+		break;
+	case V4L2_CID_CONTRAST:
+		*val = tw_readbyte(solo_dev, chip_num,
+				   TW286x_CONTRAST_ADDR(ch),
+				   TW_CONTRAST_ADDR(ch));
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		rval = tw_readbyte(solo_dev, chip_num,
+				   TW286x_BRIGHTNESS_ADDR(ch),
+				   TW_BRIGHTNESS_ADDR(ch));
+		if (is_tw286x(solo_dev, chip_num)) 
+			*val = (s32)((char)rval) + 128;
+		else
+			*val = rval;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#if 0
+/*
+ * For audio output volume, the output channel is only 1. In this case we
+ * don't need to offset TW_CHIP_OFFSET_ADDR. The TW_CHIP_OFFSET_ADDR used
+ * is the base address of the techwell chip.
+ */
+void tw2815_Set_AudioOutVol(struct solo6010_dev *solo_dev, unsigned int u_val)
+{
+	unsigned int val;
+	unsigned int chip_num;
+
+	chip_num = (solo_dev->nr_chans - 1) / 4;
+
+	val = tw_readbyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
+			  TW_AUDIO_OUTPUT_VOL_ADDR);
+
+	u_val = (val & 0x0f) | (u_val << 4);
+
+	tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
+		     TW_AUDIO_OUTPUT_VOL_ADDR, u_val);
+}
+#endif
+
+u8 tw28_get_audio_gain(struct solo6010_dev *solo_dev, u8 ch)
+{
+	u8 val;
+	u8 chip_num;
+
+	/* Get the right chip and on-chip channel */
+	chip_num = ch / 4;
+	ch %= 4;
+
+	val = tw_readbyte(solo_dev, chip_num,
+			  TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+			  TW_AUDIO_INPUT_GAIN_ADDR(ch));
+
+	return (ch % 2) ? (val >> 4) : (val & 0x0f);
+}
+
+void tw28_set_audio_gain(struct solo6010_dev *solo_dev, u8 ch, u8 val)
+{
+	u8 old_val;
+	u8 chip_num;
+
+	/* Get the right chip and on-chip channel */
+	chip_num = ch / 4;
+	ch %= 4;
+
+	old_val = tw_readbyte(solo_dev, chip_num,
+			      TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+			      TW_AUDIO_INPUT_GAIN_ADDR(ch));
+
+	val = (old_val & ((ch % 2) ? 0x0f : 0xf0)) |
+		((ch % 2) ? (val << 4) : val);
+
+	tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+		     TW_AUDIO_INPUT_GAIN_ADDR(ch), val);
+}
diff --git a/drivers/staging/solo6x10/solo6010-tw28.h b/drivers/staging/solo6x10/solo6010-tw28.h
new file mode 100644
index 00000000000..a7eecfa1a81
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-tw28.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_TW28_H
+#define __SOLO6010_TW28_H
+
+#include "solo6010.h"
+
+#define TW_NUM_CHIP				4
+#define TW_BASE_ADDR				0x28
+#define TW_CHIP_OFFSET_ADDR(n)			(TW_BASE_ADDR + (n))
+
+/* tw2815 */
+#define TW_AV_STAT_ADDR				0x5a
+#define TW_HUE_ADDR(n)				(0x07 | ((n) << 4))
+#define TW_SATURATION_ADDR(n)			(0x08 | ((n) << 4))
+#define TW_CONTRAST_ADDR(n)			(0x09 | ((n) << 4))
+#define TW_BRIGHTNESS_ADDR(n)			(0x0a | ((n) << 4))
+#define TW_AUDIO_OUTPUT_VOL_ADDR		0x70
+#define TW_AUDIO_INPUT_GAIN_ADDR(n)		(0x60 + ((n > 1) ? 1 : 0))
+
+/* tw286x */
+#define TW286X_AV_STAT_ADDR			0xfd
+#define TW286x_HUE_ADDR(n)			(0x06 | ((n) << 4))
+#define TW286x_SATURATIONU_ADDR(n)		(0x04 | ((n) << 4))
+#define TW286x_SATURATIONV_ADDR(n)		(0x05 | ((n) << 4))
+#define TW286x_CONTRAST_ADDR(n)			(0x02 | ((n) << 4))
+#define TW286x_BRIGHTNESS_ADDR(n)		(0x01 | ((n) << 4))
+#define TW286x_SHARPNESS(n)			(0x03 | ((n) << 4))
+#define TW286x_AUDIO_OUTPUT_VOL_ADDR		0xdf
+#define TW286x_AUDIO_INPUT_GAIN_ADDR(n)		(0xD0 + ((n > 1) ? 1 : 0))
+
+int solo_tw28_init(struct solo6010_dev *solo_dev);
+
+int tw28_set_ctrl_val(struct solo6010_dev *solo_dev, u32 ctrl, u8 ch,
+		      s32 val);
+int tw28_get_ctrl_val(struct solo6010_dev *solo_dev, u32 ctrl, u8 ch,
+		      s32 *val);
+
+u8 tw28_get_audio_gain(struct solo6010_dev *solo_dev, u8 ch);
+void tw28_set_audio_gain(struct solo6010_dev *solo_dev, u8 ch, u8 val);
+int tw28_get_video_status(struct solo6010_dev *solo_dev, u8 ch);
+
+#if 0
+unsigned int tw2815_get_audio_status(struct SOLO6010 *solo6010);
+void tw2815_Set_AudioOutVol(struct SOLO6010 *solo6010, unsigned int u_val);
+#endif
+
+#endif /* __SOLO6010_TW28_H */
diff --git a/drivers/staging/solo6x10/solo6010-v4l2-enc.c b/drivers/staging/solo6x10/solo6010-v4l2-enc.c
new file mode 100644
index 00000000000..f114b4b7d8e
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-v4l2-enc.c
@@ -0,0 +1,1564 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "solo6010.h"
+#include "solo6010-tw28.h"
+#include "solo6010-jpeg.h"
+
+#define MIN_VID_BUFFERS		4
+#define FRAME_BUF_SIZE		(128 * 1024)
+#define MP4_QS			16
+
+static int solo_enc_thread(void *data);
+
+extern unsigned video_nr;
+
+struct solo_enc_fh {
+	struct			solo_enc_dev *enc;
+	u32			fmt;
+	u16			rd_idx;
+	u8			enc_on;
+	enum solo_enc_types	type;
+	struct videobuf_queue	vidq;
+	struct list_head	vidq_active;
+	struct task_struct	*kthread;
+};
+
+static unsigned char vid_vop_header[] = {
+	0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
+	0x02, 0x48, 0x05, 0xc0, 0x00, 0x40, 0x00, 0x40,
+	0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
+	0x1f, 0x4c, 0x58, 0x10, 0x78, 0x51, 0x18, 0x3e,
+};
+
+/*
+ * Things we can change around:
+ *
+ * byte  10,        4-bits 01111000                   aspect
+ * bytes 21,22,23  16-bits 000x1111 11111111 1111x000 fps/res
+ * bytes 23,24,25  15-bits 00000n11 11111111 11111x00 interval
+ * bytes 25,26,27  13-bits 00000x11 11111111 111x0000 width
+ * bytes 27,28,29  13-bits 000x1111 11111111 1x000000 height
+ * byte  29         1-bit  0x100000                   interlace
+ */
+
+/* For aspect */
+#define XVID_PAR_43_PAL		2
+#define XVID_PAR_43_NTSC	3
+
+static const u32 solo_user_ctrls[] = {
+	V4L2_CID_BRIGHTNESS,
+	V4L2_CID_CONTRAST,
+	V4L2_CID_SATURATION,
+	V4L2_CID_HUE,
+	V4L2_CID_SHARPNESS,
+	0
+};
+
+static const u32 solo_mpeg_ctrls[] = {
+	V4L2_CID_MPEG_VIDEO_ENCODING,
+	V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+	0
+};
+
+static const u32 solo_private_ctrls[] = {
+	V4L2_CID_MOTION_ENABLE,
+	V4L2_CID_MOTION_THRESHOLD,
+	0
+};
+
+static const u32 solo_fmtx_ctrls[] = {
+	V4L2_CID_RDS_TX_RADIO_TEXT,
+	0
+};
+
+static const u32 *solo_ctrl_classes[] = {
+	solo_user_ctrls,
+	solo_mpeg_ctrls,
+	solo_fmtx_ctrls,
+	solo_private_ctrls,
+	NULL
+};
+
+struct vop_header {
+	/* VD_IDX0 */
+	u32 size:20, sync_start:1, page_stop:1, vop_type:2, channel:4,
+		nop0:1, source_fl:1, interlace:1, progressive:1;
+
+	/* VD_IDX1 */
+	u32 vsize:8, hsize:8, frame_interop:1, nop1:7, win_id:4, scale:4;
+
+	/* VD_IDX2 */
+	u32 base_addr:16, nop2:15, hoff:1;
+
+	/* VD_IDX3 - User set macros */
+	u32 sy:12, sx:12, nop3:1, hzoom:1, read_interop:1, write_interlace:1,
+		scale_mode:4;
+
+	/* VD_IDX4 - User set macros continued */
+	u32 write_page:8, nop4:24;
+
+	/* VD_IDX5 */
+	u32 next_code_addr;
+
+	u32 end_nops[10];
+} __attribute__((packed));
+
+static int solo_is_motion_on(struct solo_enc_dev *solo_enc)
+{
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	u8 ch = solo_enc->ch;
+
+	if (solo_dev->motion_mask & (1 << ch))
+		return 1;
+	return 0;
+}
+
+static void solo_motion_toggle(struct solo_enc_dev *solo_enc, int on)
+{
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	u8 ch = solo_enc->ch;
+
+	spin_lock(&solo_enc->lock);
+
+	if (on)
+		solo_dev->motion_mask |= (1 << ch);
+	else
+		solo_dev->motion_mask &= ~(1 << ch);
+
+	solo_reg_write(solo_dev, SOLO_VI_MOT_ADR,
+		       SOLO_VI_MOTION_EN(solo_dev->motion_mask) |
+		       (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
+
+	if (solo_dev->motion_mask)
+		solo6010_irq_on(solo_dev, SOLO_IRQ_MOTION);
+	else
+		solo6010_irq_off(solo_dev, SOLO_IRQ_MOTION);
+
+	spin_unlock(&solo_enc->lock);
+}
+
+/* Should be called with solo_enc->lock held */
+static void solo_update_mode(struct solo_enc_dev *solo_enc)
+{
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	assert_spin_locked(&solo_enc->lock);
+
+	solo_enc->interlaced = (solo_enc->mode & 0x08) ? 1 : 0;
+	solo_enc->bw_weight = max(solo_dev->fps / solo_enc->interval, 1);
+
+	switch (solo_enc->mode) {
+	case SOLO_ENC_MODE_CIF:
+		solo_enc->width = solo_dev->video_hsize >> 1;
+		solo_enc->height = solo_dev->video_vsize;
+		break;
+	case SOLO_ENC_MODE_D1:
+		solo_enc->width = solo_dev->video_hsize;
+		solo_enc->height = solo_dev->video_vsize << 1;
+		solo_enc->bw_weight <<= 2;
+		break;
+	default:
+		WARN(1, "mode is unknown");
+	}
+}
+
+/* Should be called with solo_enc->lock held */
+static int solo_enc_on(struct solo_enc_fh *fh)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	u8 ch = solo_enc->ch;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	u8 interval;
+
+	assert_spin_locked(&solo_enc->lock);
+
+	if (fh->enc_on)
+		return 0;
+
+	solo_update_mode(solo_enc);
+
+	/* Make sure to bw check on first reader */
+	if (!atomic_read(&solo_enc->readers)) {
+		if (solo_enc->bw_weight > solo_dev->enc_bw_remain)
+			return -EBUSY;
+		else
+			solo_dev->enc_bw_remain -= solo_enc->bw_weight;
+	}
+
+	fh->kthread = kthread_run(solo_enc_thread, fh, SOLO6010_NAME "_enc");
+
+	if (IS_ERR(fh->kthread))
+		return PTR_ERR(fh->kthread);
+
+	fh->enc_on = 1;
+	fh->rd_idx = solo_enc->solo_dev->enc_wr_idx;
+
+	if (fh->type == SOLO_ENC_TYPE_EXT)
+		solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(ch), 1);
+
+	if (atomic_inc_return(&solo_enc->readers) > 1)
+		return 0;
+
+	/* Disable all encoding for this channel */
+	solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), 0);
+
+	/* Common for both std and ext encoding */
+	solo_reg_write(solo_dev, SOLO_VE_CH_INTL(ch),
+		       solo_enc->interlaced ? 1 : 0);
+
+	if (solo_enc->interlaced)
+		interval = solo_enc->interval - 1;
+	else
+		interval = solo_enc->interval;
+
+	/* Standard encoding only */
+	solo_reg_write(solo_dev, SOLO_VE_CH_GOP(ch), solo_enc->gop);
+	solo_reg_write(solo_dev, SOLO_VE_CH_QP(ch), solo_enc->qp);
+	solo_reg_write(solo_dev, SOLO_CAP_CH_INTV(ch), interval);
+
+	/* Extended encoding only */
+	solo_reg_write(solo_dev, SOLO_VE_CH_GOP_E(ch), solo_enc->gop);
+	solo_reg_write(solo_dev, SOLO_VE_CH_QP_E(ch), solo_enc->qp);
+	solo_reg_write(solo_dev, SOLO_CAP_CH_INTV_E(ch), interval);
+
+	/* Enables the standard encoder */
+	solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), solo_enc->mode);
+
+	/* Settle down Beavis... */
+	mdelay(10);
+
+	return 0;
+}
+
+static void solo_enc_off(struct solo_enc_fh *fh)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	if (!fh->enc_on)
+		return;
+
+	if (fh->kthread) {
+		kthread_stop(fh->kthread);
+		fh->kthread = NULL;
+	}
+
+	solo_dev->enc_bw_remain += solo_enc->bw_weight;
+	fh->enc_on = 0;
+
+	if (atomic_dec_return(&solo_enc->readers) > 0)
+		return;
+
+	solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(solo_enc->ch), 0);
+	solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(solo_enc->ch), 0);
+}
+
+static void enc_reset_gop(struct solo6010_dev *solo_dev, u8 ch)
+{
+	BUG_ON(ch >= solo_dev->nr_chans);
+	solo_reg_write(solo_dev, SOLO_VE_CH_GOP(ch), 1);
+	solo_dev->v4l2_enc[ch]->reset_gop = 1;
+}
+
+static int enc_gop_reset(struct solo6010_dev *solo_dev, u8 ch, u8 vop)
+{
+	BUG_ON(ch >= solo_dev->nr_chans);
+	if (!solo_dev->v4l2_enc[ch]->reset_gop)
+		return 0;
+	if (vop)
+		return 1;
+	solo_dev->v4l2_enc[ch]->reset_gop = 0;
+	solo_reg_write(solo_dev, SOLO_VE_CH_GOP(ch),
+		       solo_dev->v4l2_enc[ch]->gop);
+	return 0;
+}
+
+static int enc_get_mpeg_dma_t(struct solo6010_dev *solo_dev, dma_addr_t buf,
+			      unsigned int off, unsigned int size)
+{
+	int ret;
+
+	if (off > SOLO_MP4E_EXT_SIZE(solo_dev))
+		return -EINVAL;
+
+	if (off + size <= SOLO_MP4E_EXT_SIZE(solo_dev))
+		return solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_MP4E, 0, buf,
+				      SOLO_MP4E_EXT_ADDR(solo_dev) + off, size);
+
+	/* Buffer wrap */
+	ret = solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_MP4E, 0, buf,
+			    SOLO_MP4E_EXT_ADDR(solo_dev) + off,
+			    SOLO_MP4E_EXT_SIZE(solo_dev) - off);
+
+	ret |= solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_MP4E, 0,
+			      buf + SOLO_MP4E_EXT_SIZE(solo_dev) - off,
+			      SOLO_MP4E_EXT_ADDR(solo_dev),
+			      size + off - SOLO_MP4E_EXT_SIZE(solo_dev));
+
+	return ret;
+}
+
+static int enc_get_mpeg_dma(struct solo6010_dev *solo_dev, void *buf,
+			    unsigned int off, unsigned int size)
+{
+	int ret;
+
+	dma_addr_t dma_addr = pci_map_single(solo_dev->pdev, buf, size,
+					     PCI_DMA_FROMDEVICE);
+	ret = enc_get_mpeg_dma_t(solo_dev, dma_addr, off, size);
+	pci_unmap_single(solo_dev->pdev, dma_addr, size, PCI_DMA_FROMDEVICE);
+
+	return ret;
+}
+
+static int enc_get_jpeg_dma(struct solo6010_dev *solo_dev, dma_addr_t buf,
+			    unsigned int off, unsigned int size)
+{
+	int ret;
+
+	if (off > SOLO_JPEG_EXT_SIZE(solo_dev))
+		return -EINVAL;
+
+	if (off + size <= SOLO_JPEG_EXT_SIZE(solo_dev))
+		return solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_JPEG, 0, buf,
+				      SOLO_JPEG_EXT_ADDR(solo_dev) + off, size);
+
+	/* Buffer wrap */
+	ret = solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_JPEG, 0, buf,
+			     SOLO_JPEG_EXT_ADDR(solo_dev) + off,
+			     SOLO_JPEG_EXT_SIZE(solo_dev) - off);
+
+	ret |= solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_JPEG, 0,
+			      buf + SOLO_JPEG_EXT_SIZE(solo_dev) - off,
+			      SOLO_JPEG_EXT_ADDR(solo_dev),
+			      size + off - SOLO_JPEG_EXT_SIZE(solo_dev));
+
+	return ret;
+}
+
+static int solo_fill_jpeg(struct solo_enc_fh *fh, struct solo_enc_buf *enc_buf,
+			  struct videobuf_buffer *vb, dma_addr_t vbuf)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	u8 *p = videobuf_queue_to_vaddr(&fh->vidq, vb);
+
+	memcpy(p, jpeg_header, sizeof(jpeg_header));
+	p[SOF0_START + 5] = 0xff & (solo_enc->height >> 8);
+	p[SOF0_START + 6] = 0xff & solo_enc->height;
+	p[SOF0_START + 7] = 0xff & (solo_enc->width >> 8);
+	p[SOF0_START + 8] = 0xff & solo_enc->width;
+
+	vbuf += sizeof(jpeg_header);
+	vb->size = enc_buf->jpeg_size + sizeof(jpeg_header);
+
+	return enc_get_jpeg_dma(solo_dev, vbuf, enc_buf->jpeg_off,
+				enc_buf->jpeg_size);
+}
+
+static int solo_fill_mpeg(struct solo_enc_fh *fh, struct solo_enc_buf *enc_buf,
+			  struct videobuf_buffer *vb, dma_addr_t vbuf)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct vop_header vh;
+	int ret;
+	int frame_size, frame_off;
+
+	if (WARN_ON_ONCE(enc_buf->size <= sizeof(vh)))
+		return -1;
+
+	/* First get the hardware vop header (not real mpeg) */
+	ret = enc_get_mpeg_dma(solo_dev, &vh, enc_buf->off, sizeof(vh));
+	if (ret)
+		return -1;
+
+	if (WARN_ON_ONCE(vh.size > enc_buf->size))
+		return -1;
+
+	vb->width = vh.hsize << 4;
+	vb->height = vh.vsize << 4;
+	vb->size = vh.size;
+
+	/* If this is a key frame, add extra m4v header */
+	if (!enc_buf->vop) {
+		u16 fps = solo_dev->fps * 1000;
+		u16 interval = solo_enc->interval * 1000;
+		u8 *p = videobuf_queue_to_vaddr(&fh->vidq, vb);
+
+		memcpy(p, vid_vop_header, sizeof(vid_vop_header));
+
+		if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
+			p[10] |= ((XVID_PAR_43_NTSC << 3) & 0x78);
+		else
+			p[10] |= ((XVID_PAR_43_PAL << 3) & 0x78);
+
+		/* Frame rate and interval */
+		p[22] = fps >> 4;
+		p[23] = ((fps << 4) & 0xf0) | 0x0c | ((interval >> 13) & 0x3);
+		p[24] = (interval >> 5) & 0xff;
+		p[25] = ((interval << 3) & 0xf8) | 0x04;
+
+		/* Width and height */
+		p[26] = (vb->width >> 3) & 0xff;
+		p[27] = ((vb->height >> 9) & 0x0f) | 0x10;
+		p[28] = (vb->height >> 1) & 0xff;
+
+		/* Interlace */
+		if (vh.interlace)
+			p[29] |= 0x20;
+
+		/* Adjust the dma buffer past this header */
+		vb->size += sizeof(vid_vop_header);
+		vbuf += sizeof(vid_vop_header);
+	}
+
+	/* Now get the actual mpeg payload */
+	frame_off = (enc_buf->off + sizeof(vh)) % SOLO_MP4E_EXT_SIZE(solo_dev);
+	frame_size = enc_buf->size - sizeof(vh);
+	ret = enc_get_mpeg_dma_t(solo_dev, vbuf, frame_off, frame_size);
+	if (WARN_ON_ONCE(ret))
+		return -1;
+
+	return 0;
+}
+
+/* On successful return (0), leaves solo_enc->lock unlocked */
+static int solo_enc_fillbuf(struct solo_enc_fh *fh,
+			    struct videobuf_buffer *vb)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct solo_enc_buf *enc_buf = NULL;
+	dma_addr_t vbuf;
+	int ret;
+	u16 idx = fh->rd_idx;
+
+	while (idx != solo_dev->enc_wr_idx) {
+		struct solo_enc_buf *ebuf = &solo_dev->enc_buf[idx];
+		idx = (idx + 1) % SOLO_NR_RING_BUFS;
+		if (fh->fmt == V4L2_PIX_FMT_MPEG) {
+			if (fh->type != ebuf->type)
+				continue;
+			if (ebuf->ch == solo_enc->ch) {
+				enc_buf = ebuf;
+				break;
+			}
+		} else if (ebuf->ch == solo_enc->ch) {
+			/* For mjpeg, keep reading to the newest frame */
+			enc_buf = ebuf;
+		}
+	}
+
+	fh->rd_idx = idx;
+
+	if (!enc_buf)
+		return -1;
+
+	if ((fh->fmt == V4L2_PIX_FMT_MPEG &&
+	     vb->bsize < enc_buf->size) ||
+	    (fh->fmt == V4L2_PIX_FMT_MJPEG &&
+	     vb->bsize < (enc_buf->jpeg_size + sizeof(jpeg_header)))) {
+		return -1;
+	}
+
+	if (!(vbuf = videobuf_to_dma_contig(vb)))
+		return -1;
+
+	/* Is it ok that we mess with this buffer out of lock? */
+	spin_unlock(&solo_enc->lock);
+
+	if (fh->fmt == V4L2_PIX_FMT_MPEG)
+		ret = solo_fill_mpeg(fh, enc_buf, vb, vbuf);
+	else
+		ret = solo_fill_jpeg(fh, enc_buf, vb, vbuf);
+
+	if (ret) // Ignore failures
+		return 0;
+
+	list_del(&vb->queue);
+	vb->field_count++;
+	vb->ts = enc_buf->ts;
+	vb->state = VIDEOBUF_DONE;
+
+	wake_up(&vb->done);
+
+	return 0;
+}
+
+static void solo_enc_thread_try(struct solo_enc_fh *fh)
+{
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct videobuf_buffer *vb;
+
+	for (;;) {
+		spin_lock(&solo_enc->lock);
+
+		if (list_empty(&fh->vidq_active))
+			break;
+
+		vb = list_first_entry(&fh->vidq_active,
+				      struct videobuf_buffer, queue);
+
+		if (!waitqueue_active(&vb->done))
+			break;
+
+		/* On success, returns with solo_enc->lock unlocked */
+		if (solo_enc_fillbuf(fh, vb))
+			break;
+	}
+
+	assert_spin_locked(&solo_enc->lock);
+	spin_unlock(&solo_enc->lock);
+}
+
+static int solo_enc_thread(void *data)
+{
+	struct solo_enc_fh *fh = data;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	DECLARE_WAITQUEUE(wait, current);
+
+	set_freezable();
+	add_wait_queue(&solo_enc->thread_wait, &wait);
+
+	for (;;) {
+		long timeout = schedule_timeout_interruptible(HZ);
+		if (timeout == -ERESTARTSYS || kthread_should_stop())
+			break;
+		solo_enc_thread_try(fh);
+		try_to_freeze();
+	}
+
+	remove_wait_queue(&solo_enc->thread_wait, &wait);
+
+        return 0;
+}
+
+void solo_motion_isr(struct solo6010_dev *solo_dev)
+{
+	u32 status;
+	int i;
+
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_MOTION);
+
+	status = solo_reg_read(solo_dev, SOLO_VI_MOT_STATUS);
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		struct solo_enc_dev *solo_enc = solo_dev->v4l2_enc[i];
+
+		BUG_ON(solo_enc == NULL);
+
+		if (solo_enc->motion_detected)
+			continue;
+		if (!(status & (1 << i)))
+			continue;
+
+		solo_enc->motion_detected = 1;
+	}
+}
+
+void solo_enc_v4l2_isr(struct solo6010_dev *solo_dev)
+{
+	struct solo_enc_buf *enc_buf;
+	struct videnc_status vstatus;
+	u32 mpeg_current, mpeg_next, mpeg_size;
+	u32 jpeg_current, jpeg_next, jpeg_size;
+	u32 reg_mpeg_size;
+	u8 cur_q, vop_type;
+	u8 ch;
+	enum solo_enc_types enc_type;
+
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_ENCODER);
+
+	vstatus.status11 = solo_reg_read(solo_dev, SOLO_VE_STATE(11));
+	cur_q = (vstatus.status11_st.last_queue + 1) % MP4_QS;
+
+	vstatus.status0 = solo_reg_read(solo_dev, SOLO_VE_STATE(0));
+	reg_mpeg_size = (vstatus.status0_st.mp4_enc_code_size + 64 + 32) &
+			(~31);
+
+	while (solo_dev->enc_idx != cur_q) {
+		mpeg_current = solo_reg_read(solo_dev,
+					SOLO_VE_MPEG4_QUE(solo_dev->enc_idx));
+		jpeg_current = solo_reg_read(solo_dev,
+					SOLO_VE_JPEG_QUE(solo_dev->enc_idx));
+		solo_dev->enc_idx = (solo_dev->enc_idx + 1) % MP4_QS;
+		mpeg_next = solo_reg_read(solo_dev,
+					SOLO_VE_MPEG4_QUE(solo_dev->enc_idx));
+		jpeg_next = solo_reg_read(solo_dev,
+					SOLO_VE_JPEG_QUE(solo_dev->enc_idx));
+
+		if ((ch = (mpeg_current >> 24) & 0x1f) >= SOLO_MAX_CHANNELS) {
+			ch -= SOLO_MAX_CHANNELS;
+			enc_type = SOLO_ENC_TYPE_EXT;
+		} else
+			enc_type = SOLO_ENC_TYPE_STD;
+
+		vop_type = (mpeg_current >> 29) & 3;
+
+		mpeg_current &= 0x00ffffff;
+		mpeg_next    &= 0x00ffffff;
+		jpeg_current &= 0x00ffffff;
+		jpeg_next    &= 0x00ffffff;
+
+		mpeg_size = (SOLO_MP4E_EXT_SIZE(solo_dev) +
+			     mpeg_next - mpeg_current) %
+			    SOLO_MP4E_EXT_SIZE(solo_dev);
+
+		jpeg_size = (SOLO_JPEG_EXT_SIZE(solo_dev) +
+			     jpeg_next - jpeg_current) %
+			    SOLO_JPEG_EXT_SIZE(solo_dev);
+
+		/* XXX I think this means we had a ring overflow? */
+		if (mpeg_current > mpeg_next && mpeg_size != reg_mpeg_size) {
+			enc_reset_gop(solo_dev, ch);
+			continue;
+		}
+
+		/* When resetting the GOP, skip frames until I-frame */
+		if (enc_gop_reset(solo_dev, ch, vop_type))
+			continue;
+
+		enc_buf = &solo_dev->enc_buf[solo_dev->enc_wr_idx];
+
+		enc_buf->vop = vop_type;
+		enc_buf->ch = ch;
+		enc_buf->off = mpeg_current;
+		enc_buf->size = mpeg_size;
+		enc_buf->jpeg_off = jpeg_current;
+		enc_buf->jpeg_size = jpeg_size;
+		enc_buf->type = enc_type;
+
+		do_gettimeofday(&enc_buf->ts);
+
+		solo_dev->enc_wr_idx = (solo_dev->enc_wr_idx + 1) %
+					SOLO_NR_RING_BUFS;
+
+		wake_up_interruptible(&solo_dev->v4l2_enc[ch]->thread_wait);
+	}
+
+	return;
+}
+
+static int solo_enc_buf_setup(struct videobuf_queue *vq, unsigned int *count,
+			      unsigned int *size)
+{
+        *size = FRAME_BUF_SIZE;
+
+        if (*count < MIN_VID_BUFFERS)
+		*count = MIN_VID_BUFFERS;
+
+        return 0;
+}
+
+static int solo_enc_buf_prepare(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb,
+				enum v4l2_field field)
+{
+	struct solo_enc_fh *fh = vq->priv_data;
+	struct solo_enc_dev *solo_enc = fh->enc;
+
+	vb->size = FRAME_BUF_SIZE;
+	if (vb->baddr != 0 && vb->bsize < vb->size)
+		return -EINVAL;
+
+	/* These properties only change when queue is idle */
+	vb->width = solo_enc->width;
+	vb->height = solo_enc->height;
+	vb->field  = field;
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		int rc = videobuf_iolock(vq, vb, NULL);
+		if (rc < 0) {
+			videobuf_dma_contig_free(vq, vb);
+			vb->state = VIDEOBUF_NEEDS_INIT;
+			return rc;
+		}
+	}
+	vb->state = VIDEOBUF_PREPARED;
+
+	return 0;
+}
+
+static void solo_enc_buf_queue(struct videobuf_queue *vq,
+			       struct videobuf_buffer *vb)
+{
+	struct solo_enc_fh *fh = vq->priv_data;
+
+	vb->state = VIDEOBUF_QUEUED;
+	list_add_tail(&vb->queue, &fh->vidq_active);
+	wake_up_interruptible(&fh->enc->thread_wait);
+}
+
+static void solo_enc_buf_release(struct videobuf_queue *vq,
+				 struct videobuf_buffer *vb)
+{
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops solo_enc_video_qops = {
+	.buf_setup	= solo_enc_buf_setup,
+	.buf_prepare	= solo_enc_buf_prepare,
+	.buf_queue	= solo_enc_buf_queue,
+	.buf_release	= solo_enc_buf_release,
+};
+
+static unsigned int solo_enc_poll(struct file *file,
+				  struct poll_table_struct *wait)
+{
+	struct solo_enc_fh *fh = file->private_data;
+
+	return videobuf_poll_stream(file, &fh->vidq, wait);
+}
+
+static int solo_enc_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct solo_enc_fh *fh = file->private_data;
+
+	return videobuf_mmap_mapper(&fh->vidq, vma);
+}
+
+static int solo_enc_open(struct file *file)
+{
+	struct solo_enc_dev *solo_enc = video_drvdata(file);
+	struct solo_enc_fh *fh;
+
+	if ((fh = kzalloc(sizeof(*fh), GFP_KERNEL)) == NULL)
+		return -ENOMEM;
+
+	spin_lock(&solo_enc->lock);
+
+	fh->enc = solo_enc;
+	file->private_data = fh;
+	INIT_LIST_HEAD(&fh->vidq_active);
+	fh->fmt = V4L2_PIX_FMT_MPEG;
+	fh->type = SOLO_ENC_TYPE_STD;
+
+	videobuf_queue_dma_contig_init(&fh->vidq, &solo_enc_video_qops,
+				    &solo_enc->solo_dev->pdev->dev,
+				    &solo_enc->lock,
+				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+				    V4L2_FIELD_INTERLACED,
+				    sizeof(struct videobuf_buffer), fh);
+
+	spin_unlock(&solo_enc->lock);
+
+	return 0;
+}
+
+static ssize_t solo_enc_read(struct file *file, char __user *data,
+			     size_t count, loff_t *ppos)
+{
+	struct solo_enc_fh *fh = file->private_data;
+	struct solo_enc_dev *solo_enc = fh->enc;
+
+	/* Make sure the encoder is on */
+	if (!fh->enc_on) {
+		int ret;
+
+		spin_lock(&solo_enc->lock);
+		ret = solo_enc_on(fh);
+	        spin_unlock(&solo_enc->lock);
+		if (ret)
+			return ret;
+	}
+
+	return videobuf_read_stream(&fh->vidq, data, count, ppos, 0,
+				    file->f_flags & O_NONBLOCK);
+}
+
+static int solo_enc_release(struct file *file)
+{
+	struct solo_enc_fh *fh = file->private_data;
+
+	videobuf_stop(&fh->vidq);
+	videobuf_mmap_free(&fh->vidq);
+	solo_enc_off(fh);
+	kfree(fh);
+
+	return 0;
+}
+
+static int solo_enc_querycap(struct file *file, void  *priv,
+			     struct v4l2_capability *cap)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	strcpy(cap->driver, SOLO6010_NAME);
+	snprintf(cap->card, sizeof(cap->card), "Softlogic 6010 Enc %d",
+		 solo_enc->ch);
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI %s",
+		 pci_name(solo_dev->pdev));
+	cap->version = SOLO6010_VER_NUM;
+	cap->capabilities =     V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_READWRITE |
+				V4L2_CAP_STREAMING;
+	return 0;
+}
+
+static int solo_enc_enum_input(struct file *file, void *priv,
+			       struct v4l2_input *input)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	if (input->index)
+		return -EINVAL;
+
+	snprintf(input->name, sizeof(input->name), "Encoder %d",
+		 solo_enc->ch + 1);
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+
+	if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
+		input->std = V4L2_STD_NTSC_M;
+	else
+		input->std = V4L2_STD_PAL_M;
+
+	if (!tw28_get_video_status(solo_dev, solo_enc->ch))
+		input->status = V4L2_IN_ST_NO_SIGNAL;
+
+	return 0;
+}
+
+static int solo_enc_set_input(struct file *file, void *priv, unsigned int index)
+{
+	if (index)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int solo_enc_get_input(struct file *file, void *priv,
+			      unsigned int *index)
+{
+	*index = 0;
+
+	return 0;
+}
+
+static int solo_enc_enum_fmt_cap(struct file *file, void *priv,
+				 struct v4l2_fmtdesc *f)
+{
+	switch (f->index) {
+	case 0:
+		f->pixelformat = V4L2_PIX_FMT_MPEG;
+		strcpy(f->description, "MPEG-4 AVC");
+		break;
+	case 1:
+		f->pixelformat = V4L2_PIX_FMT_MJPEG;
+		strcpy(f->description, "MJPEG");
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	f->flags = V4L2_FMT_FLAG_COMPRESSED;
+
+	return 0;
+}
+
+static int solo_enc_try_fmt_cap(struct file *file, void *priv,
+			    struct v4l2_format *f)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_MPEG &&
+	    pix->pixelformat != V4L2_PIX_FMT_MJPEG)
+		return -EINVAL;
+
+	/* We cannot change width/height in mid read */
+	if (atomic_read(&solo_enc->readers) > 0) {
+		if (pix->width != solo_enc->width ||
+		    pix->height != solo_enc->height)
+			return -EBUSY;
+	} else if (!(pix->width == solo_dev->video_hsize &&
+	      pix->height == solo_dev->video_vsize << 1) &&
+	    !(pix->width == solo_dev->video_hsize >> 1 &&
+	      pix->height == solo_dev->video_vsize)) {
+		/* Default to CIF 1/2 size */
+		pix->width = solo_dev->video_hsize >> 1;
+		pix->height = solo_dev->video_vsize;
+	}
+
+	if (pix->field == V4L2_FIELD_ANY)
+		pix->field = V4L2_FIELD_INTERLACED;
+	else if (pix->field != V4L2_FIELD_INTERLACED) {
+		pix->field = V4L2_FIELD_INTERLACED;
+	}
+
+	/* Just set these */
+	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	pix->sizeimage = FRAME_BUF_SIZE;
+
+	return 0;
+}
+
+static int solo_enc_set_fmt_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	int ret;
+
+	spin_lock(&solo_enc->lock);
+
+	if ((ret = solo_enc_try_fmt_cap(file, priv, f))) {
+		spin_unlock(&solo_enc->lock);
+		return ret;
+	}
+
+	if (pix->width == solo_dev->video_hsize)
+		solo_enc->mode = SOLO_ENC_MODE_D1;
+	else
+		solo_enc->mode = SOLO_ENC_MODE_CIF;
+
+	/* This does not change the encoder at all */
+	fh->fmt = pix->pixelformat;
+
+	if (pix->priv)
+		fh->type = SOLO_ENC_TYPE_EXT;
+	ret = solo_enc_on(fh);
+
+	spin_unlock(&solo_enc->lock);
+
+	return ret;
+}
+
+static int solo_enc_get_fmt_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width = solo_enc->width;
+	pix->height = solo_enc->height;
+	pix->pixelformat = fh->fmt;
+	pix->field = solo_enc->interlaced ? V4L2_FIELD_INTERLACED :
+		     V4L2_FIELD_NONE;
+	pix->sizeimage = FRAME_BUF_SIZE;
+	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	return 0;
+}
+
+static int solo_enc_reqbufs(struct file *file, void *priv, 
+			    struct v4l2_requestbuffers *req)
+{
+	struct solo_enc_fh *fh = priv;
+
+	return videobuf_reqbufs(&fh->vidq, req);
+}
+
+static int solo_enc_querybuf(struct file *file, void *priv,
+			     struct v4l2_buffer *buf)
+{
+	struct solo_enc_fh *fh = priv;
+
+	return videobuf_querybuf(&fh->vidq, buf);
+}
+
+static int solo_enc_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct solo_enc_fh *fh = priv;
+
+	return videobuf_qbuf(&fh->vidq, buf);
+}
+
+static int solo_enc_dqbuf(struct file *file, void *priv,
+			  struct v4l2_buffer *buf)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	int ret;
+
+	/* Make sure the encoder is on */
+	if (!fh->enc_on) {
+		spin_lock(&solo_enc->lock);
+		ret = solo_enc_on(fh);
+		spin_unlock(&solo_enc->lock);
+		if (ret)
+			return ret;
+	}
+
+	ret = videobuf_dqbuf(&fh->vidq, buf, file->f_flags & O_NONBLOCK);
+	if (ret)
+		return ret;
+
+	/* Signal motion detection */
+	if (solo_is_motion_on(solo_enc)) {
+		buf->flags |= V4L2_BUF_FLAG_MOTION_ON;
+		if (solo_enc->motion_detected) {
+			buf->flags |= V4L2_BUF_FLAG_MOTION_DETECTED;
+			solo_reg_write(solo_enc->solo_dev, SOLO_VI_MOT_CLEAR,
+				       1 << solo_enc->ch);
+			solo_enc->motion_detected = 0;
+		}
+	}
+
+	/* Check for key frame on mpeg data */
+	if (fh->fmt == V4L2_PIX_FMT_MPEG) {
+		struct videobuf_buffer *vb = fh->vidq.bufs[buf->index];
+		u8 *p = videobuf_queue_to_vaddr(&fh->vidq, vb);
+		if (p[3] == 0x00)
+			buf->flags |= V4L2_BUF_FLAG_KEYFRAME;
+		else
+			buf->flags |= V4L2_BUF_FLAG_PFRAME;
+	}
+
+	return 0;
+}
+
+static int solo_enc_streamon(struct file *file, void *priv,
+			     enum v4l2_buf_type i)
+{
+	struct solo_enc_fh *fh = priv;
+
+	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamon(&fh->vidq);
+}
+
+static int solo_enc_streamoff(struct file *file, void *priv,
+			      enum v4l2_buf_type i)
+{
+	struct solo_enc_fh *fh = priv;
+
+	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamoff(&fh->vidq);
+}
+
+static int solo_enc_s_std(struct file *file, void *priv, v4l2_std_id *i)
+{
+	return 0;
+}
+
+static int solo_enum_framesizes(struct file *file, void *priv,
+				struct v4l2_frmsizeenum *fsize)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo6010_dev *solo_dev = fh->enc->solo_dev;
+
+	if (fsize->pixel_format != V4L2_PIX_FMT_MPEG)
+		return -EINVAL;
+
+	switch (fsize->index) {
+	case 0:
+		fsize->discrete.width = solo_dev->video_hsize >> 1;
+		fsize->discrete.height = solo_dev->video_vsize;
+		break;
+	case 1:
+		fsize->discrete.width = solo_dev->video_hsize;
+		fsize->discrete.height = solo_dev->video_vsize << 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+
+	return 0;
+}
+
+static int solo_enum_frameintervals(struct file *file, void *priv,
+				    struct v4l2_frmivalenum *fintv)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo6010_dev *solo_dev = fh->enc->solo_dev;
+
+	if (fintv->pixel_format != V4L2_PIX_FMT_MPEG || fintv->index)
+		return -EINVAL;
+
+	fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+
+	fintv->stepwise.min.numerator = solo_dev->fps;
+	fintv->stepwise.min.denominator = 1;
+
+	fintv->stepwise.max.numerator = solo_dev->fps;
+	fintv->stepwise.max.denominator = 15;
+
+	fintv->stepwise.step.numerator = 1;
+	fintv->stepwise.step.denominator = 1;
+
+	return 0;
+}
+
+static int solo_g_parm(struct file *file, void *priv,
+		       struct v4l2_streamparm *sp)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	cp->timeperframe.numerator = solo_enc->interval;
+	cp->timeperframe.denominator = solo_dev->fps;
+	cp->capturemode = 0;
+	/* XXX: Shouldn't we be able to get/set this from videobuf? */
+	cp->readbuffers = 2;
+
+        return 0;
+}
+
+static int solo_s_parm(struct file *file, void *priv,
+		       struct v4l2_streamparm *sp)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+
+	spin_lock(&solo_enc->lock);
+
+	if (atomic_read(&solo_enc->readers) > 0) {
+		spin_unlock(&solo_enc->lock);
+		return -EBUSY;
+	}
+
+	if ((cp->timeperframe.numerator == 0) ||
+	    (cp->timeperframe.denominator == 0)) {
+		/* reset framerate */
+		cp->timeperframe.numerator = 1;
+		cp->timeperframe.denominator = solo_dev->fps;
+	}
+
+	if (cp->timeperframe.denominator != solo_dev->fps)
+		cp->timeperframe.denominator = solo_dev->fps;
+
+	if (cp->timeperframe.numerator > 15)
+		cp->timeperframe.numerator = 15;
+
+	solo_enc->interval = cp->timeperframe.numerator;
+
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+
+	solo_enc->gop = max(solo_dev->fps / solo_enc->interval, 1);
+	solo_update_mode(solo_enc);
+
+	spin_unlock(&solo_enc->lock);
+
+        return 0;
+}
+
+static int solo_queryctrl(struct file *file, void *priv,
+			  struct v4l2_queryctrl *qc)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	qc->id = v4l2_ctrl_next(solo_ctrl_classes, qc->id);
+	if (!qc->id)
+		return -EINVAL;
+
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+	case V4L2_CID_CONTRAST:
+	case V4L2_CID_SATURATION:
+	case V4L2_CID_HUE:
+		return v4l2_ctrl_query_fill(qc, 0x00, 0xff, 1, 0x80);
+	case V4L2_CID_SHARPNESS:
+		return v4l2_ctrl_query_fill(qc, 0x00, 0x0f, 1, 0x00);
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+		return v4l2_ctrl_query_fill(
+			qc, V4L2_MPEG_VIDEO_ENCODING_MPEG_1,
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC, 1,
+			V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC);
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		return v4l2_ctrl_query_fill(qc, 1, 255, 1, solo_dev->fps);
+#ifdef PRIVATE_CIDS
+	case V4L2_CID_MOTION_THRESHOLD:
+		qc->flags |= V4L2_CTRL_FLAG_SLIDER;
+		qc->type = V4L2_CTRL_TYPE_INTEGER;
+		qc->minimum = 0;
+		qc->maximum = 0xffff;
+		qc->step = 1;
+		qc->default_value = SOLO_DEF_MOT_THRESH;
+		strlcpy(qc->name, "Motion Detection Threshold",
+			sizeof(qc->name));
+		return 0;
+	case V4L2_CID_MOTION_ENABLE:
+		qc->type = V4L2_CTRL_TYPE_BOOLEAN;
+		qc->minimum = 0;
+		qc->maximum = qc->step = 1;
+		qc->default_value = 0;
+		strlcpy(qc->name, "Motion Detection Enable", sizeof(qc->name));
+		return 0;
+#else
+	case V4L2_CID_MOTION_THRESHOLD:
+		return v4l2_ctrl_query_fill(qc, 0, 0xffff, 1,
+					    SOLO_DEF_MOT_THRESH);
+	case V4L2_CID_MOTION_ENABLE:
+		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
+#endif
+	case V4L2_CID_RDS_TX_RADIO_TEXT:
+		qc->type = V4L2_CTRL_TYPE_STRING;
+		qc->minimum = 0;
+		qc->maximum = OSD_TEXT_MAX;
+		qc->step = 1;
+		qc->default_value = 0;
+		strlcpy(qc->name, "OSD Text", sizeof(qc->name));
+		return 0;
+	}
+
+        return -EINVAL;
+}
+
+static int solo_querymenu(struct file *file, void *priv,
+			  struct v4l2_querymenu *qmenu)
+{
+	struct v4l2_queryctrl qctrl;
+	int err;
+
+	qctrl.id = qmenu->id;
+	if ((err = solo_queryctrl(file, priv, &qctrl)))
+		return err;
+
+	return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL);
+}
+
+static int solo_g_ctrl(struct file *file, void *priv,
+		       struct v4l2_control *ctrl)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+	case V4L2_CID_CONTRAST:
+	case V4L2_CID_SATURATION:
+	case V4L2_CID_HUE:
+	case V4L2_CID_SHARPNESS:
+		return tw28_get_ctrl_val(solo_dev, ctrl->id, solo_enc->ch,
+					 &ctrl->value);
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+		ctrl->value = V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC;
+		break;
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		ctrl->value = solo_enc->gop;
+		break;
+	case V4L2_CID_MOTION_THRESHOLD:
+		ctrl->value = solo_enc->motion_thresh;
+		break;
+	case V4L2_CID_MOTION_ENABLE:
+		ctrl->value = solo_is_motion_on(solo_enc);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int solo_s_ctrl(struct file *file, void *priv,
+		       struct v4l2_control *ctrl)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	struct solo6010_dev *solo_dev = solo_enc->solo_dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+	case V4L2_CID_CONTRAST:
+	case V4L2_CID_SATURATION:
+	case V4L2_CID_HUE:
+	case V4L2_CID_SHARPNESS:
+		return tw28_set_ctrl_val(solo_dev, ctrl->id, solo_enc->ch,
+					 ctrl->value);
+	case V4L2_CID_MPEG_VIDEO_ENCODING:
+		if (ctrl->value != V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC)
+			return -ERANGE;
+		break;
+	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+		if (ctrl->value < 1 || ctrl->value > 255)
+			return -ERANGE;
+		solo_enc->gop = ctrl->value;
+		solo_reg_write(solo_dev, SOLO_VE_CH_GOP(solo_enc->ch),
+			       solo_enc->gop);
+		solo_reg_write(solo_dev, SOLO_VE_CH_GOP_E(solo_enc->ch),
+			       solo_enc->gop);
+		break;
+	case V4L2_CID_MOTION_THRESHOLD:
+		/* TODO accept value on lower 16-bits and use high
+		 * 16-bits to assign the value to a specific block */
+		if (ctrl->value < 0 || ctrl->value > 0xffff)
+			return -ERANGE;
+		solo_enc->motion_thresh = ctrl->value;
+		solo_set_motion_threshold(solo_dev, solo_enc->ch, ctrl->value);
+		break;
+	case V4L2_CID_MOTION_ENABLE:
+		solo_motion_toggle(solo_enc, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int solo_s_ext_ctrls(struct file *file, void *priv,
+			    struct v4l2_ext_controls *ctrls)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	int i;
+
+	for (i = 0; i < ctrls->count; i++) {
+		struct v4l2_ext_control *ctrl = (ctrls->controls + i);
+		int err;
+
+		switch (ctrl->id) {
+		case V4L2_CID_RDS_TX_RADIO_TEXT:
+			if (ctrl->size - 1 > OSD_TEXT_MAX)
+                                err = -ERANGE;
+			else {
+                        	err = copy_from_user(solo_enc->osd_text,
+						     ctrl->string,
+						     OSD_TEXT_MAX);
+				solo_enc->osd_text[OSD_TEXT_MAX] = '\0';
+				if (!err)
+					err = solo_osd_print(solo_enc);
+			}
+			break;
+		default:
+			err = -EINVAL;
+		}
+
+		if (err < 0) {
+			ctrls->error_idx = i;
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static int solo_g_ext_ctrls(struct file *file, void *priv,
+			    struct v4l2_ext_controls *ctrls)
+{
+	struct solo_enc_fh *fh = priv;
+	struct solo_enc_dev *solo_enc = fh->enc;
+	int i;
+
+	for (i = 0; i < ctrls->count; i++) {
+		struct v4l2_ext_control *ctrl = (ctrls->controls + i);
+		int err;
+
+		switch (ctrl->id) {
+		case V4L2_CID_RDS_TX_RADIO_TEXT:
+			if (ctrl->size < OSD_TEXT_MAX) {
+				ctrl->size = OSD_TEXT_MAX;
+				err = -ENOSPC;
+			} else {
+				err = copy_to_user(ctrl->string,
+						   solo_enc->osd_text,
+						   OSD_TEXT_MAX);
+			}
+			break;
+		default:
+			err = -EINVAL;
+		}
+
+		if (err < 0) {
+			ctrls->error_idx = i;
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static const struct v4l2_file_operations solo_enc_fops = {
+	.owner			= THIS_MODULE,
+	.open			= solo_enc_open,
+	.release		= solo_enc_release,
+	.read			= solo_enc_read,
+	.poll			= solo_enc_poll,
+	.mmap			= solo_enc_mmap,
+	.ioctl			= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops solo_enc_ioctl_ops = {
+	.vidioc_querycap		= solo_enc_querycap,
+	.vidioc_s_std			= solo_enc_s_std,
+	/* Input callbacks */
+	.vidioc_enum_input		= solo_enc_enum_input,
+	.vidioc_s_input			= solo_enc_set_input,
+	.vidioc_g_input			= solo_enc_get_input,
+	/* Video capture format callbacks */
+	.vidioc_enum_fmt_vid_cap	= solo_enc_enum_fmt_cap,
+	.vidioc_try_fmt_vid_cap		= solo_enc_try_fmt_cap,
+	.vidioc_s_fmt_vid_cap		= solo_enc_set_fmt_cap,
+	.vidioc_g_fmt_vid_cap		= solo_enc_get_fmt_cap,
+	/* Streaming I/O */
+	.vidioc_reqbufs			= solo_enc_reqbufs,
+	.vidioc_querybuf		= solo_enc_querybuf,
+	.vidioc_qbuf			= solo_enc_qbuf,
+	.vidioc_dqbuf			= solo_enc_dqbuf,
+	.vidioc_streamon		= solo_enc_streamon,
+	.vidioc_streamoff		= solo_enc_streamoff,
+	/* Frame size and interval */
+	.vidioc_enum_framesizes		= solo_enum_framesizes,
+	.vidioc_enum_frameintervals	= solo_enum_frameintervals,
+	/* Video capture parameters */
+	.vidioc_s_parm			= solo_s_parm,
+	.vidioc_g_parm			= solo_g_parm,
+	/* Controls */
+	.vidioc_queryctrl		= solo_queryctrl,
+	.vidioc_querymenu		= solo_querymenu,
+	.vidioc_g_ctrl			= solo_g_ctrl,
+	.vidioc_s_ctrl			= solo_s_ctrl,
+	.vidioc_g_ext_ctrls		= solo_g_ext_ctrls,
+	.vidioc_s_ext_ctrls		= solo_s_ext_ctrls,
+};
+
+static struct video_device solo_enc_template = {
+	.name			= SOLO6010_NAME,
+	.fops			= &solo_enc_fops,
+	.ioctl_ops		= &solo_enc_ioctl_ops,
+	.minor			= -1,
+	.release		= video_device_release,
+
+	.tvnorms		= V4L2_STD_NTSC_M | V4L2_STD_PAL_M,
+	.current_norm		= V4L2_STD_NTSC_M,
+};
+
+static struct solo_enc_dev *solo_enc_alloc(struct solo6010_dev *solo_dev, u8 ch)
+{
+	struct solo_enc_dev *solo_enc;
+	int ret;
+
+	solo_enc = kzalloc(sizeof(*solo_enc), GFP_KERNEL);
+	if (!solo_enc)
+		return ERR_PTR(-ENOMEM);
+
+	solo_enc->vfd = video_device_alloc();
+	if (!solo_enc->vfd) {
+		kfree(solo_enc);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	solo_enc->solo_dev = solo_dev;
+	solo_enc->ch = ch;
+
+	*solo_enc->vfd = solo_enc_template;
+	solo_enc->vfd->parent = &solo_dev->pdev->dev;
+	ret = video_register_device(solo_enc->vfd, VFL_TYPE_GRABBER,
+				    video_nr);
+	if (ret < 0) {
+		video_device_release(solo_enc->vfd);
+		kfree(solo_enc);
+		return ERR_PTR(ret);
+	}
+
+	video_set_drvdata(solo_enc->vfd, solo_enc);
+
+	snprintf(solo_enc->vfd->name, sizeof(solo_enc->vfd->name),
+		 "%s-enc (%i/%i)", SOLO6010_NAME, solo_dev->vfd->num,
+		 solo_enc->vfd->num);
+
+	if (video_nr >= 0)
+		video_nr++;
+
+	spin_lock_init(&solo_enc->lock);
+	init_waitqueue_head(&solo_enc->thread_wait);
+	atomic_set(&solo_enc->readers, 0);
+
+	solo_enc->qp = SOLO_DEFAULT_QP;
+        solo_enc->gop = solo_dev->fps;
+	solo_enc->interval = 1;
+	solo_enc->mode = SOLO_ENC_MODE_CIF;
+	solo_enc->motion_thresh = SOLO_DEF_MOT_THRESH;
+
+	spin_lock(&solo_enc->lock);
+	solo_update_mode(solo_enc);
+	spin_unlock(&solo_enc->lock);
+
+	return solo_enc;
+}
+
+static void solo_enc_free(struct solo_enc_dev *solo_enc)
+{
+	if (solo_enc == NULL)
+		return;
+
+	video_unregister_device(solo_enc->vfd);
+	kfree(solo_enc);
+}
+
+int solo_enc_v4l2_init(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		solo_dev->v4l2_enc[i] = solo_enc_alloc(solo_dev, i);
+		if (IS_ERR(solo_dev->v4l2_enc[i]))
+			break;
+	}
+
+	if (i != solo_dev->nr_chans) {
+		int ret = PTR_ERR(solo_dev->v4l2_enc[i]);
+		while (i--)
+			solo_enc_free(solo_dev->v4l2_enc[i]);
+		return ret;
+	}
+
+	/* D1@MAX-FPS * 4 */
+	solo_dev->enc_bw_remain = solo_dev->fps * 4 * 4;
+
+	dev_info(&solo_dev->pdev->dev, "Encoders as /dev/video%d-%d\n",
+		 solo_dev->v4l2_enc[0]->vfd->num,
+		 solo_dev->v4l2_enc[solo_dev->nr_chans - 1]->vfd->num);
+
+	return 0;
+}
+
+void solo_enc_v4l2_exit(struct solo6010_dev *solo_dev)
+{
+	int i;
+
+	solo6010_irq_off(solo_dev, SOLO_IRQ_MOTION);
+
+	for (i = 0; i < solo_dev->nr_chans; i++)
+		solo_enc_free(solo_dev->v4l2_enc[i]);
+}
diff --git a/drivers/staging/solo6x10/solo6010-v4l2.c b/drivers/staging/solo6x10/solo6010-v4l2.c
new file mode 100644
index 00000000000..9537cc6ee3b
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010-v4l2.c
@@ -0,0 +1,859 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf-dma-contig.h>
+
+#include "solo6010.h"
+#include "solo6010-tw28.h"
+
+#define SOLO_HW_BPL		2048
+#define SOLO_DISP_PIX_FIELD	V4L2_FIELD_INTERLACED
+#define SOLO_DISP_BUF_SIZE	(64 * 1024) // 64k
+
+/* Image size is two fields, SOLO_HW_BPL is one horizontal line */
+#define solo_vlines(__solo)	(__solo->video_vsize * 2)
+#define solo_image_size(__solo) (solo_bytesperline(__solo) * \
+				 solo_vlines(__solo))
+#define solo_bytesperline(__solo) (__solo->video_hsize * 2)
+
+#define MIN_VID_BUFFERS		4
+
+/* Simple file handle */
+struct solo_filehandle {
+	struct solo6010_dev	*solo_dev;
+	struct videobuf_queue	vidq;
+	struct task_struct      *kthread;
+	spinlock_t		slock;
+	int			old_write;
+	struct list_head	vidq_active;
+};
+
+unsigned video_nr = -1;
+module_param(video_nr, uint, 0644);
+MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect (default)");
+
+static void erase_on(struct solo6010_dev *solo_dev)
+{
+	solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
+	solo_dev->erasing = 1;
+	solo_dev->frame_blank = 0;
+}
+
+static int erase_off(struct solo6010_dev *solo_dev)
+{
+	if (!solo_dev->erasing)
+		return 0;
+
+	/* First time around, assert erase off */
+	if (!solo_dev->frame_blank)
+		solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, 0);
+	/* Keep the erasing flag on for 8 frames minimum */
+	if (solo_dev->frame_blank++ >= 8)
+		solo_dev->erasing = 0;
+
+	return 1;
+}
+
+void solo_video_in_isr(struct solo6010_dev *solo_dev)
+{
+	solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_VIDEO_IN);
+	wake_up_interruptible(&solo_dev->disp_thread_wait);
+}
+
+static void solo_win_setup(struct solo6010_dev *solo_dev, u8 ch,
+			   int sx, int sy, int ex, int ey, int scale)
+{
+	if (ch >= solo_dev->nr_chans)
+		return;
+
+	/* Here, we just keep window/channel the same */
+	solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(ch),
+		       SOLO_VI_WIN_CHANNEL(ch) |
+		       SOLO_VI_WIN_SX(sx) |
+		       SOLO_VI_WIN_EX(ex) |
+		       SOLO_VI_WIN_SCALE(scale));
+
+        solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(ch),
+		       SOLO_VI_WIN_SY(sy) |
+		       SOLO_VI_WIN_EY(ey));
+}
+
+static int solo_v4l2_ch_ext_4up(struct solo6010_dev *solo_dev, u8 idx, int on)
+{
+	u8 ch = idx * 4;
+
+	if (ch >= solo_dev->nr_chans)
+		return -EINVAL;
+
+	if (!on) {
+		u8 i;
+		for (i = ch; i < ch + 4; i++)
+			solo_win_setup(solo_dev, i, solo_dev->video_hsize,
+				       solo_vlines(solo_dev),
+				       solo_dev->video_hsize,
+				       solo_vlines(solo_dev), 0);
+		return 0;
+	}
+
+	/* Row 1 */
+	solo_win_setup(solo_dev, ch, 0, 0, solo_dev->video_hsize / 2,
+		       solo_vlines(solo_dev) / 2, 3);
+	solo_win_setup(solo_dev, ch + 1, solo_dev->video_hsize / 2, 0,
+		       solo_dev->video_hsize, solo_vlines(solo_dev) / 2, 3);
+	/* Row 2 */
+	solo_win_setup(solo_dev, ch + 2, 0, solo_vlines(solo_dev) / 2,
+		       solo_dev->video_hsize / 2, solo_vlines(solo_dev), 3);
+	solo_win_setup(solo_dev, ch + 3, solo_dev->video_hsize / 2,
+		       solo_vlines(solo_dev) / 2, solo_dev->video_hsize,
+		       solo_vlines(solo_dev), 3);
+
+	return 0;
+}
+
+static int solo_v4l2_ch_ext_16up(struct solo6010_dev *solo_dev, int on)
+{
+	int sy, ysize, hsize, i;
+
+	if (!on) {
+		for (i = 0; i < 16; i++)
+			solo_win_setup(solo_dev, i, solo_dev->video_hsize,
+				       solo_vlines(solo_dev),
+				       solo_dev->video_hsize,
+				       solo_vlines(solo_dev), 0);
+		return 0;
+	}
+
+	ysize = solo_vlines(solo_dev) / 4;
+	hsize = solo_dev->video_hsize / 4;
+
+	for (sy = 0, i = 0; i < 4; i++, sy += ysize) {
+		solo_win_setup(solo_dev, i * 4, 0, sy, hsize,
+			       sy + ysize, 5);
+		solo_win_setup(solo_dev, (i * 4) + 1, hsize, sy,
+			       hsize * 2, sy + ysize, 5);
+		solo_win_setup(solo_dev, (i * 4) + 2, hsize * 2, sy,
+			       hsize * 3, sy + ysize, 5);
+		solo_win_setup(solo_dev, (i * 4) + 3, hsize * 3, sy,
+			       solo_dev->video_hsize, sy + ysize, 5);
+	}
+
+	return 0;
+}
+
+static int solo_v4l2_ch(struct solo6010_dev *solo_dev, u8 ch, int on)
+{
+	u8 ext_ch;
+
+	if (ch < solo_dev->nr_chans) {
+		solo_win_setup(solo_dev, ch, on ? 0 : solo_dev->video_hsize,
+			       on ? 0 : solo_vlines(solo_dev),
+			       solo_dev->video_hsize, solo_vlines(solo_dev),
+			       on ? 1 : 0);
+		return 0;
+	}
+
+	if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
+		return -EINVAL;
+
+	ext_ch = ch - solo_dev->nr_chans;
+
+	/* 4up's first */
+	if (ext_ch < 4)
+		return solo_v4l2_ch_ext_4up(solo_dev, ext_ch, on);
+
+	/* Remaining case is 16up for 16-port */
+	return solo_v4l2_ch_ext_16up(solo_dev, on);
+}
+
+static int solo_v4l2_set_ch(struct solo6010_dev *solo_dev, u8 ch)
+{
+	if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
+		return -EINVAL;
+
+	erase_on(solo_dev);
+
+	solo_v4l2_ch(solo_dev, solo_dev->cur_disp_ch, 0);
+	solo_v4l2_ch(solo_dev, ch, 1);
+
+	solo_dev->cur_disp_ch = ch;
+
+	return 0;
+}
+
+static void solo_fillbuf(struct solo_filehandle *fh,
+			 struct videobuf_buffer *vb)
+{
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+	dma_addr_t vbuf;
+	unsigned int fdma_addr;
+	int frame_size;
+	int error = 1;
+	int i;
+
+	if (!(vbuf = videobuf_to_dma_contig(vb)))
+		goto finish_buf;
+
+	if (erase_off(solo_dev)) {
+		void *p = videobuf_queue_to_vaddr(&fh->vidq, vb);
+		int image_size = solo_image_size(solo_dev);
+		for (i = 0; i < image_size; i += 2) {
+			((u8 *)p)[i] = 0x80;
+			((u8 *)p)[i + 1] = 0x00;
+		}
+		error = 0;
+		goto finish_buf;
+	}
+
+	frame_size = SOLO_HW_BPL * solo_vlines(solo_dev);
+	fdma_addr = SOLO_DISP_EXT_ADDR(solo_dev) + (fh->old_write * frame_size);
+
+	for (i = 0; i < frame_size / SOLO_DISP_BUF_SIZE; i++) {
+		int j;
+		for (j = 0; j < (SOLO_DISP_BUF_SIZE / SOLO_HW_BPL); j++) {
+			if (solo_p2m_dma_t(solo_dev, SOLO_P2M_DMA_ID_DISP, 0,
+					   vbuf, fdma_addr + (j * SOLO_HW_BPL),
+					   solo_bytesperline(solo_dev)))
+				goto finish_buf;
+			vbuf += solo_bytesperline(solo_dev);
+		}
+		fdma_addr += SOLO_DISP_BUF_SIZE;
+	}
+	error = 0;
+
+finish_buf:
+	if (error) {
+		vb->state = VIDEOBUF_ERROR;
+	} else {
+		vb->state = VIDEOBUF_DONE;
+		vb->field_count++;
+		do_gettimeofday(&vb->ts);
+	}
+
+	wake_up(&vb->done);
+
+	return;
+}
+
+static void solo_thread_try(struct solo_filehandle *fh)
+{
+	struct videobuf_buffer *vb;
+	unsigned int cur_write;
+
+	for (;;) {
+		spin_lock(&fh->slock);
+
+		if (list_empty(&fh->vidq_active))
+			break;
+
+		vb = list_first_entry(&fh->vidq_active, struct videobuf_buffer,
+				      queue);
+
+		if (!waitqueue_active(&vb->done))
+			break;
+
+		cur_write = SOLO_VI_STATUS0_PAGE(solo_reg_read(fh->solo_dev,
+							SOLO_VI_STATUS0));
+		if (cur_write == fh->old_write)
+			break;
+
+		fh->old_write = cur_write;
+		list_del(&vb->queue);
+
+		spin_unlock(&fh->slock);
+
+		solo_fillbuf(fh, vb);
+	}
+
+	assert_spin_locked(&fh->slock);
+	spin_unlock(&fh->slock);
+}
+
+static int solo_thread(void *data)
+{
+	struct solo_filehandle *fh = data;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+	DECLARE_WAITQUEUE(wait, current);
+
+	set_freezable();
+	add_wait_queue(&solo_dev->disp_thread_wait, &wait);
+
+	for (;;) {
+		long timeout = schedule_timeout_interruptible(HZ);
+		if (timeout == -ERESTARTSYS || kthread_should_stop())
+			break;
+		solo_thread_try(fh);
+		try_to_freeze();
+	}
+
+	remove_wait_queue(&solo_dev->disp_thread_wait, &wait);
+
+        return 0;
+}
+
+static int solo_start_thread(struct solo_filehandle *fh)
+{
+	fh->kthread = kthread_run(solo_thread, fh, SOLO6010_NAME "_disp");
+
+	if (IS_ERR(fh->kthread))
+		return PTR_ERR(fh->kthread);
+
+	return 0;
+}
+
+static void solo_stop_thread(struct solo_filehandle *fh)
+{
+	if (fh->kthread) {
+		kthread_stop(fh->kthread);
+		fh->kthread = NULL;
+	}
+}
+
+static int solo_buf_setup(struct videobuf_queue *vq, unsigned int *count,
+			  unsigned int *size)
+{
+	struct solo_filehandle *fh = vq->priv_data;
+	struct solo6010_dev *solo_dev  = fh->solo_dev;
+
+        *size = solo_image_size(solo_dev);
+
+        if (*count < MIN_VID_BUFFERS)
+		*count = MIN_VID_BUFFERS;
+
+        return 0;
+}
+
+static int solo_buf_prepare(struct videobuf_queue *vq,
+			    struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct solo_filehandle *fh  = vq->priv_data;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	vb->size = solo_image_size(solo_dev);
+	if (vb->baddr != 0 && vb->bsize < vb->size)
+		return -EINVAL;
+
+	/* XXX: These properties only change when queue is idle */
+	vb->width  = solo_dev->video_hsize;
+	vb->height = solo_vlines(solo_dev);
+	vb->bytesperline = solo_bytesperline(solo_dev);
+	vb->field  = field;
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		int rc = videobuf_iolock(vq, vb, NULL);
+		if (rc < 0) {
+			videobuf_dma_contig_free(vq, vb);
+			vb->state = VIDEOBUF_NEEDS_INIT;
+			return rc;
+		}
+	}
+	vb->state = VIDEOBUF_PREPARED;
+
+	return 0;
+}
+
+static void solo_buf_queue(struct videobuf_queue *vq,
+			   struct videobuf_buffer *vb)
+{
+	struct solo_filehandle *fh = vq->priv_data;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	vb->state = VIDEOBUF_QUEUED;
+	list_add_tail(&vb->queue, &fh->vidq_active);
+	wake_up_interruptible(&solo_dev->disp_thread_wait);
+}
+
+static void solo_buf_release(struct videobuf_queue *vq,
+			     struct videobuf_buffer *vb)
+{
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops solo_video_qops = {
+	.buf_setup	= solo_buf_setup,
+	.buf_prepare	= solo_buf_prepare,
+	.buf_queue	= solo_buf_queue,
+	.buf_release	= solo_buf_release,
+};
+
+static unsigned int solo_v4l2_poll(struct file *file,
+				   struct poll_table_struct *wait)
+{
+	struct solo_filehandle *fh = file->private_data;
+
+        return videobuf_poll_stream(file, &fh->vidq, wait);
+}
+
+static int solo_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct solo_filehandle *fh = file->private_data;
+
+	return videobuf_mmap_mapper(&fh->vidq, vma);
+}
+
+static int solo_v4l2_open(struct file *file)
+{
+	struct solo6010_dev *solo_dev = video_drvdata(file);
+	struct solo_filehandle *fh;
+	int ret;
+
+	if ((fh = kzalloc(sizeof(*fh), GFP_KERNEL)) == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&fh->slock);
+	INIT_LIST_HEAD(&fh->vidq_active);
+	fh->solo_dev = solo_dev;
+	file->private_data = fh;
+
+	if ((ret = solo_start_thread(fh))) {
+		kfree(fh);
+		return ret;
+	}
+
+	videobuf_queue_dma_contig_init(&fh->vidq, &solo_video_qops,
+				    &solo_dev->pdev->dev, &fh->slock,
+				    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+				    SOLO_DISP_PIX_FIELD,
+				    sizeof(struct videobuf_buffer), fh);
+
+	return 0;
+}
+
+static ssize_t solo_v4l2_read(struct file *file, char __user *data,
+			      size_t count, loff_t *ppos)
+{
+	struct solo_filehandle *fh = file->private_data;
+
+	return videobuf_read_stream(&fh->vidq, data, count, ppos, 0,
+				    file->f_flags & O_NONBLOCK);
+}
+
+static int solo_v4l2_release(struct file *file)
+{
+	struct solo_filehandle *fh = file->private_data;
+
+	videobuf_stop(&fh->vidq);
+	videobuf_mmap_free(&fh->vidq);
+	solo_stop_thread(fh);
+	kfree(fh);
+
+	return 0;
+}
+
+static int solo_querycap(struct file *file, void  *priv,
+			 struct v4l2_capability *cap)
+{
+	struct solo_filehandle  *fh  = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	strcpy(cap->driver, SOLO6010_NAME);
+	strcpy(cap->card, "Softlogic 6010");
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI %s",
+		 pci_name(solo_dev->pdev));
+	cap->version = SOLO6010_VER_NUM;
+	cap->capabilities =     V4L2_CAP_VIDEO_CAPTURE |
+				V4L2_CAP_READWRITE |
+				V4L2_CAP_STREAMING;
+	return 0;
+}
+
+static int solo_enum_ext_input(struct solo6010_dev *solo_dev,
+			       struct v4l2_input *input)
+{
+	static const char *dispnames_1[] = { "4UP" };
+	static const char *dispnames_2[] = { "4UP-1", "4UP-2" };
+	static const char *dispnames_5[] = {
+		"4UP-1", "4UP-2", "4UP-3", "4UP-4", "16UP"
+	};
+	const char **dispnames;
+
+	if (input->index >= (solo_dev->nr_chans + solo_dev->nr_ext))
+		return -EINVAL;
+
+	if (solo_dev->nr_ext == 5)
+		dispnames = dispnames_5;
+	else if (solo_dev->nr_ext == 2)
+		dispnames = dispnames_2;
+	else
+		dispnames = dispnames_1;
+
+	snprintf(input->name, sizeof(input->name), "Multi %s",
+		 dispnames[input->index - solo_dev->nr_chans]);
+
+	return 0;
+}
+
+static int solo_enum_input(struct file *file, void *priv,
+			   struct v4l2_input *input)
+{
+	struct solo_filehandle *fh  = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	if (input->index >= solo_dev->nr_chans) {
+		int ret = solo_enum_ext_input(solo_dev, input);
+		if (ret < 0)
+			return ret;
+	} else {
+		snprintf(input->name, sizeof(input->name), "Camera %d",
+			 input->index + 1);
+
+		/* We can only check this for normal inputs */
+		if (!tw28_get_video_status(solo_dev, input->index))
+			input->status = V4L2_IN_ST_NO_SIGNAL;
+	}
+
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+
+	if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
+		input->std = V4L2_STD_NTSC_M;
+	else
+		input->std = V4L2_STD_PAL_M;
+
+	return 0;
+}
+
+static int solo_set_input(struct file *file, void *priv, unsigned int index)
+{
+	struct solo_filehandle *fh = priv;
+
+	return solo_v4l2_set_ch(fh->solo_dev, index);
+}
+
+static int solo_get_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct solo_filehandle *fh = priv;
+
+	*index = fh->solo_dev->cur_disp_ch;
+
+	return 0;
+}
+
+static int solo_enum_fmt_cap(struct file *file, void *priv,
+			     struct v4l2_fmtdesc *f)
+{
+	if (f->index)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_PIX_FMT_UYVY;
+	strlcpy(f->description, "UYUV 4:2:2 Packed", sizeof(f->description));
+
+	return 0;
+}
+
+static int solo_try_fmt_cap(struct file *file, void *priv,
+			    struct v4l2_format *f)
+{
+	struct solo_filehandle *fh = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+	int image_size = solo_image_size(solo_dev);
+
+	/* Check supported sizes */
+	if (pix->width != solo_dev->video_hsize)
+		pix->width = solo_dev->video_hsize;
+	if (pix->height != solo_vlines(solo_dev))
+		pix->height = solo_vlines(solo_dev);
+	if (pix->sizeimage != image_size)
+		pix->sizeimage = image_size;
+
+	/* Check formats */
+	if (pix->field == V4L2_FIELD_ANY)
+		pix->field = SOLO_DISP_PIX_FIELD;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_UYVY ||
+	    pix->field       != SOLO_DISP_PIX_FIELD ||
+	    pix->colorspace  != V4L2_COLORSPACE_SMPTE170M)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int solo_set_fmt_cap(struct file *file, void *priv,
+			    struct v4l2_format *f)
+{
+	struct solo_filehandle *fh = priv;
+
+	if (videobuf_queue_is_busy(&fh->vidq))
+		return -EBUSY;
+
+	/* For right now, if it doesn't match our running config,
+	 * then fail */
+	return solo_try_fmt_cap(file, priv, f);
+}
+
+static int solo_get_fmt_cap(struct file *file, void *priv,
+			    struct v4l2_format *f)
+{
+	struct solo_filehandle *fh = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+	struct v4l2_pix_format *pix = &f->fmt.pix;
+
+	pix->width = solo_dev->video_hsize;
+	pix->height = solo_vlines(solo_dev);
+	pix->pixelformat = V4L2_PIX_FMT_UYVY;
+	pix->field = SOLO_DISP_PIX_FIELD;
+	pix->sizeimage = solo_image_size(solo_dev);
+	pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	pix->bytesperline = solo_bytesperline(solo_dev);
+
+	return 0;
+}
+
+static int solo_reqbufs(struct file *file, void *priv, 
+			struct v4l2_requestbuffers *req)
+{
+	struct solo_filehandle *fh = priv;
+
+	return videobuf_reqbufs(&fh->vidq, req);
+}
+
+static int solo_querybuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct solo_filehandle *fh = priv;
+
+	return videobuf_querybuf(&fh->vidq, buf);
+}
+
+static int solo_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct solo_filehandle *fh = priv;
+
+	return videobuf_qbuf(&fh->vidq, buf);
+}
+
+static int solo_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+	struct solo_filehandle *fh = priv;
+
+	return videobuf_dqbuf(&fh->vidq, buf, file->f_flags & O_NONBLOCK);
+}
+
+static int solo_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct solo_filehandle *fh = priv;
+
+	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamon(&fh->vidq);
+}
+
+static int solo_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct solo_filehandle *fh = priv;
+
+	if (i != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamoff(&fh->vidq);
+}
+
+static int solo_s_std(struct file *file, void *priv, v4l2_std_id *i)
+{
+	return 0;
+}
+
+static const u32 solo_motion_ctrls[] = {
+	V4L2_CID_MOTION_TRACE,
+	0
+};
+
+static const u32 *solo_ctrl_classes[] = {
+	solo_motion_ctrls,
+	NULL
+};
+
+static int solo_disp_queryctrl(struct file *file, void *priv,
+			       struct v4l2_queryctrl *qc)
+{
+	qc->id = v4l2_ctrl_next(solo_ctrl_classes, qc->id);
+	if (!qc->id)
+		return -EINVAL;
+
+	switch (qc->id) {
+#ifdef PRIVATE_CIDS
+	case V4L2_CID_MOTION_TRACE:
+		qc->type = V4L2_CTRL_TYPE_BOOLEAN;
+		qc->minimum = 0;
+		qc->maximum = qc->step = 1;
+		qc->default_value = 0;
+		strlcpy(qc->name, "Motion Detection Trace", sizeof(qc->name));
+		return 0;
+#else
+	case V4L2_CID_MOTION_TRACE:
+		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
+#endif
+	}
+	return -EINVAL;
+}
+
+static int solo_disp_g_ctrl(struct file *file, void *priv,
+			    struct v4l2_control *ctrl)
+{
+	struct solo_filehandle *fh = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MOTION_TRACE:
+		ctrl->value = solo_reg_read(solo_dev, SOLO_VI_MOTION_BAR)
+			? 1 : 0;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int solo_disp_s_ctrl(struct file *file, void *priv,
+			    struct v4l2_control *ctrl)
+{
+	struct solo_filehandle *fh = priv;
+	struct solo6010_dev *solo_dev = fh->solo_dev;
+
+	switch (ctrl->id) {
+	case V4L2_CID_MOTION_TRACE:
+		if (ctrl->value) {
+			solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER,
+					SOLO_VI_MOTION_Y_ADD |
+					SOLO_VI_MOTION_Y_VALUE(0x20) |
+					SOLO_VI_MOTION_CB_VALUE(0x10) |
+					SOLO_VI_MOTION_CR_VALUE(0x10));
+			solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR,
+					SOLO_VI_MOTION_CR_ADD |
+					SOLO_VI_MOTION_Y_VALUE(0x10) |
+					SOLO_VI_MOTION_CB_VALUE(0x80) |
+					SOLO_VI_MOTION_CR_VALUE(0x10));
+		} else {
+			solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
+			solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct v4l2_file_operations solo_v4l2_fops = {
+	.owner			= THIS_MODULE,
+	.open			= solo_v4l2_open,
+	.release		= solo_v4l2_release,
+	.read			= solo_v4l2_read,
+	.poll			= solo_v4l2_poll,
+	.mmap			= solo_v4l2_mmap,
+	.ioctl			= video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops solo_v4l2_ioctl_ops = {
+	.vidioc_querycap		= solo_querycap,
+	.vidioc_s_std			= solo_s_std,
+	/* Input callbacks */
+	.vidioc_enum_input		= solo_enum_input,
+	.vidioc_s_input			= solo_set_input,
+	.vidioc_g_input			= solo_get_input,
+	/* Video capture format callbacks */
+	.vidioc_enum_fmt_vid_cap	= solo_enum_fmt_cap,
+	.vidioc_try_fmt_vid_cap		= solo_try_fmt_cap,
+	.vidioc_s_fmt_vid_cap		= solo_set_fmt_cap,
+	.vidioc_g_fmt_vid_cap		= solo_get_fmt_cap,
+	/* Streaming I/O */
+	.vidioc_reqbufs			= solo_reqbufs,
+	.vidioc_querybuf		= solo_querybuf,
+	.vidioc_qbuf			= solo_qbuf,
+	.vidioc_dqbuf			= solo_dqbuf,
+	.vidioc_streamon		= solo_streamon,
+        .vidioc_streamoff		= solo_streamoff,
+	/* Controls */
+	.vidioc_queryctrl		= solo_disp_queryctrl,
+        .vidioc_g_ctrl			= solo_disp_g_ctrl,
+        .vidioc_s_ctrl			= solo_disp_s_ctrl,
+};
+
+static struct video_device solo_v4l2_template = {
+	.name			= SOLO6010_NAME,
+	.fops			= &solo_v4l2_fops,
+	.ioctl_ops		= &solo_v4l2_ioctl_ops,
+	.minor			= -1,
+	.release		= video_device_release,
+
+	.tvnorms		= V4L2_STD_NTSC_M | V4L2_STD_PAL_M,
+	.current_norm		= V4L2_STD_NTSC_M,
+};
+
+int solo_v4l2_init(struct solo6010_dev *solo_dev)
+{
+	int ret;
+	int i;
+
+	init_waitqueue_head(&solo_dev->disp_thread_wait);
+
+	solo_dev->vfd = video_device_alloc();
+	if (!solo_dev->vfd)
+		return -ENOMEM;
+
+	*solo_dev->vfd = solo_v4l2_template;
+	solo_dev->vfd->parent = &solo_dev->pdev->dev;
+
+	ret = video_register_device(solo_dev->vfd, VFL_TYPE_GRABBER, video_nr);
+	if (ret < 0) {
+		video_device_release(solo_dev->vfd);
+		solo_dev->vfd = NULL;
+		return ret;
+	}
+
+	video_set_drvdata(solo_dev->vfd, solo_dev);
+
+	snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)",
+		 SOLO6010_NAME, solo_dev->vfd->num);
+
+	if (video_nr >= 0)
+		video_nr++;
+
+	dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with "
+		 "%d inputs (%d extended)\n", solo_dev->vfd->num,
+		 solo_dev->nr_chans, solo_dev->nr_ext);
+
+	/* Cycle all the channels and clear */
+	for (i = 0; i < solo_dev->nr_chans; i++) {
+		solo_v4l2_set_ch(solo_dev, i);
+		while (erase_off(solo_dev))
+			;// Do nothing
+	}
+
+	/* Set the default display channel */
+	solo_v4l2_set_ch(solo_dev, 0);
+	while (erase_off(solo_dev))
+		;// Do nothing
+
+	solo6010_irq_on(solo_dev, SOLO_IRQ_VIDEO_IN);
+
+	return 0;
+}
+
+void solo_v4l2_exit(struct solo6010_dev *solo_dev)
+{
+	solo6010_irq_off(solo_dev, SOLO_IRQ_VIDEO_IN);
+	if (solo_dev->vfd) {
+		video_unregister_device(solo_dev->vfd);
+		solo_dev->vfd = NULL;
+	}
+}
diff --git a/drivers/staging/solo6x10/solo6010.h b/drivers/staging/solo6x10/solo6010.h
new file mode 100644
index 00000000000..dca8e3e1545
--- /dev/null
+++ b/drivers/staging/solo6x10/solo6010.h
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
+ * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __SOLO6010_H
+#define __SOLO6010_H
+
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/semaphore.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+
+#include <linux/videodev2.h>
+#include <media/v4l2-dev.h>
+#include <media/videobuf-core.h>
+
+#include "solo6010-registers.h"
+
+#ifndef PCI_VENDOR_ID_SOFTLOGIC
+#define PCI_VENDOR_ID_SOFTLOGIC		0x9413
+#define PCI_DEVICE_ID_SOLO6010		0x6010
+#endif
+
+#ifndef PCI_VENDOR_ID_BLUECHERRY
+#define PCI_VENDOR_ID_BLUECHERRY	0x1BB3
+/* Neugent Softlogic 6010 based cards */
+#define PCI_DEVICE_ID_NEUSOLO_4		0x4304
+#define PCI_DEVICE_ID_NEUSOLO_9		0x4309
+#define PCI_DEVICE_ID_NEUSOLO_16	0x4310
+/* Commell Softlogic 6010 based cards */
+#define PCI_DEVICE_ID_COMMSOLO_4	0x4E04
+#define PCI_DEVICE_ID_COMMSOLO_9	0x4E09
+#define PCI_DEVICE_ID_COMMSOLO_16	0x4E10
+#endif /* Bluecherry */
+
+#define SOLO6010_NAME			"solo6010"
+
+#define SOLO_MAX_CHANNELS		16
+
+/* Make sure these two match */
+#define SOLO6010_VERSION		"2.0.0"
+#define SOLO6010_VER_MAJOR		2
+#define SOLO6010_VER_MINOR		0
+#define SOLO6010_VER_SUB		0
+#define SOLO6010_VER_NUM \
+    KERNEL_VERSION(SOLO6010_VER_MAJOR, SOLO6010_VER_MINOR, SOLO6010_VER_SUB)
+
+/*
+ * The SOLO6010 actually has 8 i2c channels, but we only use 2.
+ * 0 - Techwell chip(s)
+ * 1 - SAA7128
+ */
+#define SOLO_I2C_ADAPTERS		2
+#define SOLO_I2C_TW			0
+#define SOLO_I2C_SAA			1
+
+/* DMA Engine setup */
+#define SOLO_NR_P2M			4
+#define SOLO_NR_P2M_DESC		256
+#define SOLO_P2M_DESC_SIZE		(SOLO_NR_P2M_DESC * 16)
+/* MPEG and JPEG share the same interrupt and locks so they must be together
+ * in the same dma channel. */
+#define SOLO_P2M_DMA_ID_MP4E		0
+#define SOLO_P2M_DMA_ID_JPEG		0
+#define SOLO_P2M_DMA_ID_MP4D		1
+#define SOLO_P2M_DMA_ID_G723D		1
+#define SOLO_P2M_DMA_ID_DISP		2
+#define SOLO_P2M_DMA_ID_OSG		2
+#define SOLO_P2M_DMA_ID_G723E		3
+#define SOLO_P2M_DMA_ID_VIN		3
+
+/* Encoder standard modes */
+#define SOLO_ENC_MODE_CIF		2
+#define SOLO_ENC_MODE_HD1		1
+#define SOLO_ENC_MODE_D1		9
+
+#define SOLO_DEFAULT_GOP		30
+#define SOLO_DEFAULT_QP			3
+
+/* There is 8MB memory available for solo to buffer MPEG4 frames.
+ * This gives us 512 * 16kbyte queues. */
+#define SOLO_NR_RING_BUFS		512
+
+#define SOLO_CLOCK_MHZ			108
+
+#ifndef V4L2_BUF_FLAG_MOTION_ON
+#define V4L2_BUF_FLAG_MOTION_ON		0x0400
+#define V4L2_BUF_FLAG_MOTION_DETECTED	0x0800
+#endif
+#ifndef V4L2_CID_MOTION_ENABLE
+#define PRIVATE_CIDS
+#define V4L2_CID_MOTION_ENABLE		(V4L2_CID_PRIVATE_BASE+0)
+#define V4L2_CID_MOTION_THRESHOLD	(V4L2_CID_PRIVATE_BASE+1)
+#define V4L2_CID_MOTION_TRACE		(V4L2_CID_PRIVATE_BASE+2)
+#endif
+
+enum SOLO_I2C_STATE {
+	IIC_STATE_IDLE,
+	IIC_STATE_START,
+	IIC_STATE_READ,
+	IIC_STATE_WRITE,
+	IIC_STATE_STOP
+};
+
+struct solo_p2m_dev {
+	struct semaphore	sem;
+	struct completion	completion;
+	int			error;
+	u8			desc[SOLO_P2M_DESC_SIZE];
+};
+
+#define OSD_TEXT_MAX		30
+
+enum solo_enc_types {
+	SOLO_ENC_TYPE_STD,
+	SOLO_ENC_TYPE_EXT,
+};
+
+struct solo_enc_dev {
+	struct solo6010_dev	*solo_dev;
+	/* V4L2 Items */
+	struct video_device	*vfd;
+	/* General accounting */
+	wait_queue_head_t	thread_wait;
+	spinlock_t		lock;
+	atomic_t		readers;
+	u8			ch;
+	u8			mode, gop, qp, interlaced, interval;
+	u8			reset_gop;
+	u8			bw_weight;
+	u8			motion_detected;
+	u16			motion_thresh;
+	u16			width;
+	u16			height;
+	char			osd_text[OSD_TEXT_MAX + 1];
+};
+
+struct solo_enc_buf {
+	u8			vop;
+	u8			ch;
+	enum solo_enc_types	type;
+	u32			off;
+	u32			size;
+	u32			jpeg_off;
+	u32			jpeg_size;
+	struct timeval		ts;
+};
+
+/* The SOLO6010 PCI Device */
+struct solo6010_dev {
+	/* General stuff */
+	struct pci_dev		*pdev;
+	u8 __iomem		*reg_base;
+	int			nr_chans;
+	int			nr_ext;
+	u32			irq_mask;
+	u32			motion_mask;
+	spinlock_t		reg_io_lock;
+
+	/* tw28xx accounting */
+	u8			tw2865, tw2864, tw2815;
+	u8			tw28_cnt;
+
+	/* i2c related items */
+	struct i2c_adapter	i2c_adap[SOLO_I2C_ADAPTERS];
+	enum SOLO_I2C_STATE	i2c_state;
+	struct semaphore	i2c_sem;
+	int			i2c_id;
+	wait_queue_head_t	i2c_wait;
+	struct i2c_msg		*i2c_msg;
+	unsigned int		i2c_msg_num;
+	unsigned int		i2c_msg_ptr;
+
+	/* P2M DMA Engine */
+	struct solo_p2m_dev	p2m_dev[SOLO_NR_P2M];
+
+	/* V4L2 Display items */
+	struct video_device	*vfd;
+	unsigned int		erasing;
+	unsigned int		frame_blank;
+	u8			cur_disp_ch;
+	wait_queue_head_t	disp_thread_wait;
+
+	/* V4L2 Encoder items */
+	struct solo_enc_dev	*v4l2_enc[SOLO_MAX_CHANNELS];
+	u16			enc_bw_remain;
+	/* IDX into hw mp4 encoder */
+	u8			enc_idx;
+	/* Our software ring of enc buf references */
+	u16			enc_wr_idx;
+	struct solo_enc_buf	enc_buf[SOLO_NR_RING_BUFS];
+
+	/* Current video settings */
+	u32 			video_type;
+	u16			video_hsize, video_vsize;
+	u16			vout_hstart, vout_vstart;
+	u16			vin_hstart, vin_vstart;
+	u8			fps;
+
+	/* Audio components */
+	struct snd_card		*snd_card;
+	struct snd_pcm		*snd_pcm;
+	atomic_t		snd_users;
+	int			g723_hw_idx;
+};
+
+static inline u32 solo_reg_read(struct solo6010_dev *solo_dev, int reg)
+{
+	unsigned long flags;
+	u32 ret;
+	u16 val;
+
+	spin_lock_irqsave(&solo_dev->reg_io_lock, flags);
+
+	ret = readl(solo_dev->reg_base + reg);
+	rmb();
+	pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val);
+	rmb();
+
+	spin_unlock_irqrestore(&solo_dev->reg_io_lock, flags);
+
+	return ret;
+}
+
+static inline void solo_reg_write(struct solo6010_dev *solo_dev, int reg,
+				      u32 data)
+{
+	unsigned long flags;
+	u16 val;
+
+	spin_lock_irqsave(&solo_dev->reg_io_lock, flags);
+
+	writel(data, solo_dev->reg_base + reg);
+	wmb();
+	pci_read_config_word(solo_dev->pdev, PCI_STATUS, &val);
+	rmb();
+
+	spin_unlock_irqrestore(&solo_dev->reg_io_lock, flags);
+}
+
+void solo6010_irq_on(struct solo6010_dev *solo_dev, u32 mask);
+void solo6010_irq_off(struct solo6010_dev *solo_dev, u32 mask);
+
+/* Init/exit routeines for subsystems */
+int solo_disp_init(struct solo6010_dev *solo_dev);
+void solo_disp_exit(struct solo6010_dev *solo_dev);
+
+int solo_gpio_init(struct solo6010_dev *solo_dev);
+void solo_gpio_exit(struct solo6010_dev *solo_dev);
+
+int solo_i2c_init(struct solo6010_dev *solo_dev);
+void solo_i2c_exit(struct solo6010_dev *solo_dev);
+
+int solo_p2m_init(struct solo6010_dev *solo_dev);
+void solo_p2m_exit(struct solo6010_dev *solo_dev);
+
+int solo_v4l2_init(struct solo6010_dev *solo_dev);
+void solo_v4l2_exit(struct solo6010_dev *solo_dev);
+
+int solo_enc_init(struct solo6010_dev *solo_dev);
+void solo_enc_exit(struct solo6010_dev *solo_dev);
+
+int solo_enc_v4l2_init(struct solo6010_dev *solo_dev);
+void solo_enc_v4l2_exit(struct solo6010_dev *solo_dev);
+
+int solo_g723_init(struct solo6010_dev *solo_dev);
+void solo_g723_exit(struct solo6010_dev *solo_dev);
+
+/* ISR's */
+int solo_i2c_isr(struct solo6010_dev *solo_dev);
+void solo_p2m_isr(struct solo6010_dev *solo_dev, int id);
+void solo_p2m_error_isr(struct solo6010_dev *solo_dev, u32 status);
+void solo_enc_v4l2_isr(struct solo6010_dev *solo_dev);
+void solo_g723_isr(struct solo6010_dev *solo_dev);
+void solo_motion_isr(struct solo6010_dev *solo_dev);
+void solo_video_in_isr(struct solo6010_dev *solo_dev);
+
+/* i2c read/write */
+u8 solo_i2c_readbyte(struct solo6010_dev *solo_dev, int id, u8 addr, u8 off);
+void solo_i2c_writebyte(struct solo6010_dev *solo_dev, int id, u8 addr, u8 off,
+			u8 data);
+
+/* P2M DMA */
+int solo_p2m_dma_t(struct solo6010_dev *solo_dev, u8 id, int wr,
+		   dma_addr_t dma_addr, u32 ext_addr, u32 size);
+int solo_p2m_dma(struct solo6010_dev *solo_dev, u8 id, int wr,
+		 void *sys_addr, u32 ext_addr, u32 size);
+
+/* Set the threshold for motion detection */
+void solo_set_motion_threshold(struct solo6010_dev *solo_dev, u8 ch, u16 val);
+#define SOLO_DEF_MOT_THRESH		0x0300
+
+/* Write text on OSD */
+int solo_osd_print(struct solo_enc_dev *solo_enc);
+
+#endif /* __SOLO6010_H */
diff --git a/drivers/staging/spectra/Kconfig b/drivers/staging/spectra/Kconfig
new file mode 100644
index 00000000000..5e2ffefb60a
--- /dev/null
+++ b/drivers/staging/spectra/Kconfig
@@ -0,0 +1,40 @@
+
+menuconfig SPECTRA
+	tristate "Denali Spectra Flash Translation Layer"
+	depends on BLOCK
+	default n
+	---help---
+	  Enable the FTL pseudo-filesystem used with the NAND Flash
+	  controller on Intel Moorestown Platform to pretend to be a disk
+
+choice
+	prompt "Compile for"
+	depends on SPECTRA
+	default SPECTRA_MRST_HW
+
+config SPECTRA_MRST_HW
+	bool "Moorestown hardware mode"
+	help
+	  Driver communicates with the Moorestown hardware's register interface.
+	  in DMA mode.
+
+config SPECTRA_MTD
+	bool "Linux MTD mode"
+	depends on MTD
+	help
+	  Driver communicates with the kernel MTD subsystem instead of its own
+	  built-in hardware driver.
+
+config SPECTRA_EMU
+	bool "RAM emulator testing"
+	help
+	  Driver emulates Flash on a RAM buffer and / or disk file.  Useful to test the behavior of FTL layer.
+
+endchoice
+
+config SPECTRA_MRST_HW_DMA
+       bool
+       default n
+       depends on SPECTRA_MRST_HW
+       help
+         Use DMA for native hardware interface.
diff --git a/drivers/staging/spectra/Makefile b/drivers/staging/spectra/Makefile
new file mode 100644
index 00000000000..f777dfba05a
--- /dev/null
+++ b/drivers/staging/spectra/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile of Intel Moorestown NAND controller driver
+#
+
+obj-$(CONFIG_SPECTRA) += spectra.o
+spectra-y := ffsport.o flash.o lld.o
+spectra-$(CONFIG_SPECTRA_MRST_HW) += lld_nand.o 
+spectra-$(CONFIG_SPECTRA_MRST_HW_DMA) += lld_cdma.o
+spectra-$(CONFIG_SPECTRA_EMU) += lld_emu.o
+spectra-$(CONFIG_SPECTRA_MTD) += lld_mtd.o
+
diff --git a/drivers/staging/spectra/README b/drivers/staging/spectra/README
new file mode 100644
index 00000000000..ecba559b899
--- /dev/null
+++ b/drivers/staging/spectra/README
@@ -0,0 +1,29 @@
+This is a driver for NAND controller of Intel Moorestown platform.
+
+This driver is a standalone linux block device driver, it acts as if it's a normal hard disk.
+It includes three layer:
+	block layer interface - file ffsport.c
+	Flash Translation Layer (FTL) - file flash.c (implement the NAND flash Translation Layer, includs address mapping, garbage collection, wear-leveling and so on)
+	Low level layer - file lld_nand.c/lld_cdma.c/lld_emu.c (which implements actual controller hardware registers access)
+
+This driver can be build as modules or build-in.
+
+Dependency:
+This driver has dependency on IA Firmware of Intel Moorestown platform.
+It need the IA Firmware to create the block table for the first time.
+And to validate this driver code without IA Firmware, you can change the
+macro AUTO_FORMAT_FLASH from 0 to 1 in file spectraswconfig.h. Thus the
+driver will erase the whole nand flash and create a new block table.
+
+TODO:
+	- Enable Command DMA feature support
+	- lower the memory footprint
+	- Remove most of the unnecessary global variables
+	- Change all the upcase variable / functions name to lowercase
+	- Some other misc bugs
+
+Please send patches to:
+	Greg Kroah-Hartman <gregkh@suse.de>
+
+And Cc to: Gao Yunpeng <yunpeng.gao@intel.com>
+
diff --git a/drivers/staging/spectra/ffsdefs.h b/drivers/staging/spectra/ffsdefs.h
new file mode 100644
index 00000000000..a9e9cd233d2
--- /dev/null
+++ b/drivers/staging/spectra/ffsdefs.h
@@ -0,0 +1,58 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _FFSDEFS_
+#define _FFSDEFS_
+
+#define CLEAR 0			/*use this to clear a field instead of "fail"*/
+#define SET   1			/*use this to set a field instead of "pass"*/
+#define FAIL 1			/*failed flag*/
+#define PASS 0			/*success flag*/
+#define ERR -1			/*error flag*/
+
+#define   ERASE_CMD             10
+#define   WRITE_MAIN_CMD        11
+#define   READ_MAIN_CMD         12
+#define   WRITE_SPARE_CMD       13
+#define   READ_SPARE_CMD        14
+#define   WRITE_MAIN_SPARE_CMD  15
+#define   READ_MAIN_SPARE_CMD   16
+#define   MEMCOPY_CMD           17
+#define   DUMMY_CMD             99
+
+#define     EVENT_PASS                                  0x00
+#define     EVENT_CORRECTABLE_DATA_ERROR_FIXED         0x01
+#define     EVENT_UNCORRECTABLE_DATA_ERROR              0x02
+#define     EVENT_TIME_OUT                              0x03
+#define     EVENT_PROGRAM_FAILURE                       0x04
+#define     EVENT_ERASE_FAILURE                         0x05
+#define     EVENT_MEMCOPY_FAILURE                       0x06
+#define     EVENT_FAIL                                  0x07
+
+#define     EVENT_NONE                                  0x22
+#define     EVENT_DMA_CMD_COMP                          0x77
+#define     EVENT_ECC_TRANSACTION_DONE                  0x88
+#define     EVENT_DMA_CMD_FAIL                          0x99
+
+#define CMD_PASS        0
+#define CMD_FAIL        1
+#define CMD_ABORT       2
+#define CMD_NOT_DONE    3
+
+#endif /* _FFSDEFS_ */
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
new file mode 100644
index 00000000000..d0c5c97eda3
--- /dev/null
+++ b/drivers/staging/spectra/ffsport.c
@@ -0,0 +1,827 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include "ffsport.h"
+#include "flash.h"
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/blkdev.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/log2.h>
+#include <linux/init.h>
+
+/**** Helper functions used for Div, Remainder operation on u64 ****/
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_Calc_Used_Bits
+* Inputs:       Power of 2 number
+* Outputs:      Number of Used Bits
+*               0, if the argument is 0
+* Description:  Calculate the number of bits used by a given power of 2 number
+*               Number can be upto 32 bit
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_Calc_Used_Bits(u32 n)
+{
+	int tot_bits = 0;
+
+	if (n >= 1 << 16) {
+		n >>= 16;
+		tot_bits += 16;
+	}
+
+	if (n >= 1 << 8) {
+		n >>=  8;
+		tot_bits +=  8;
+	}
+
+	if (n >= 1 << 4) {
+		n >>=  4;
+		tot_bits +=  4;
+	}
+
+	if (n >= 1 << 2) {
+		n >>=  2;
+		tot_bits +=  2;
+	}
+
+	if (n >= 1 << 1)
+		tot_bits +=  1;
+
+	return ((n == 0) ? (0) : tot_bits);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_u64_Div
+* Inputs:       Number of u64
+*               A power of 2 number as Division
+* Outputs:      Quotient of the Divisor operation
+* Description:  It divides the address by divisor by using bit shift operation
+*               (essentially without explicitely using "/").
+*               Divisor is a power of 2 number and Divided is of u64
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u64 GLOB_u64_Div(u64 addr, u32 divisor)
+{
+	return  (u64)(addr >> GLOB_Calc_Used_Bits(divisor));
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_u64_Remainder
+* Inputs:       Number of u64
+*               Divisor Type (1 -PageAddress, 2- BlockAddress)
+* Outputs:      Remainder of the Division operation
+* Description:  It calculates the remainder of a number (of u64) by
+*               divisor(power of 2 number ) by using bit shifting and multiply
+*               operation(essentially without explicitely using "/").
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u64 GLOB_u64_Remainder(u64 addr, u32 divisor_type)
+{
+	u64 result = 0;
+
+	if (divisor_type == 1) { /* Remainder -- Page */
+		result = (addr >> DeviceInfo.nBitsInPageDataSize);
+		result = result * DeviceInfo.wPageDataSize;
+	} else if (divisor_type == 2) { /* Remainder -- Block */
+		result = (addr >> DeviceInfo.nBitsInBlockDataSize);
+		result = result * DeviceInfo.wBlockDataSize;
+	}
+
+	result = addr - result;
+
+	return result;
+}
+
+#define NUM_DEVICES             1
+#define PARTITIONS              8
+
+#define GLOB_SBD_NAME          "nd"
+#define GLOB_SBD_IRQ_NUM       (29)
+#define GLOB_VERSION		"driver version 20091110"
+
+#define GLOB_SBD_IOCTL_GC                        (0x7701)
+#define GLOB_SBD_IOCTL_WL                        (0x7702)
+#define GLOB_SBD_IOCTL_FORMAT                    (0x7703)
+#define GLOB_SBD_IOCTL_ERASE_FLASH               (0x7704)
+#define GLOB_SBD_IOCTL_FLUSH_CACHE               (0x7705)
+#define GLOB_SBD_IOCTL_COPY_BLK_TABLE            (0x7706)
+#define GLOB_SBD_IOCTL_COPY_WEAR_LEVELING_TABLE  (0x7707)
+#define GLOB_SBD_IOCTL_GET_NAND_INFO             (0x7708)
+#define GLOB_SBD_IOCTL_WRITE_DATA                (0x7709)
+#define GLOB_SBD_IOCTL_READ_DATA                 (0x770A)
+
+static int reserved_mb = 0;
+module_param(reserved_mb, int, 0);
+MODULE_PARM_DESC(reserved_mb, "Reserved space for OS image, in MiB (default 25 MiB)");
+
+int nand_debug_level;
+module_param(nand_debug_level, int, 0644);
+MODULE_PARM_DESC(nand_debug_level, "debug level value: 1-3");
+
+MODULE_LICENSE("GPL");
+
+struct spectra_nand_dev {
+	struct pci_dev *dev;
+	u64 size;
+	u16 users;
+	spinlock_t qlock;
+	void __iomem *ioaddr;  /* Mapped address */
+	struct request_queue *queue;
+	struct task_struct *thread;
+	struct gendisk *gd;
+	u8 *tmp_buf;
+};
+
+
+static int GLOB_SBD_majornum;
+
+static char *GLOB_version = GLOB_VERSION;
+
+static struct spectra_nand_dev nand_device[NUM_DEVICES];
+
+static struct mutex spectra_lock;
+
+static int res_blks_os = 1;
+
+struct spectra_indentfy_dev_tag IdentifyDeviceData;
+
+static int force_flush_cache(void)
+{
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	if (ERR == GLOB_FTL_Flush_Cache()) {
+		printk(KERN_ERR "Fail to Flush FTL Cache!\n");
+		return -EFAULT;
+	}
+#if CMD_DMA
+		if (glob_ftl_execute_cmds())
+			return -EIO;
+		else
+			return 0;
+#endif
+	return 0;
+}
+
+struct ioctl_rw_page_info {
+	u8 *data;
+	unsigned int page;
+};
+
+static int ioctl_read_page_data(unsigned long arg)
+{
+	u8 *buf;
+	struct ioctl_rw_page_info info;
+	int result = PASS;
+
+	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+		return -EFAULT;
+
+	buf = kmalloc(IdentifyDeviceData.PageDataSize, GFP_ATOMIC);
+	if (!buf) {
+		printk(KERN_ERR "ioctl_read_page_data: "
+		       "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	mutex_lock(&spectra_lock);
+	result = GLOB_FTL_Page_Read(buf,
+		(u64)info.page * IdentifyDeviceData.PageDataSize);
+	mutex_unlock(&spectra_lock);
+
+	if (copy_to_user((void __user *)info.data, buf,
+			   IdentifyDeviceData.PageDataSize)) {
+		printk(KERN_ERR "ioctl_read_page_data: "
+		       "failed to copy user data\n");
+		kfree(buf);
+		return -EFAULT;
+	}
+
+	kfree(buf);
+	return result;
+}
+
+static int ioctl_write_page_data(unsigned long arg)
+{
+	u8 *buf;
+	struct ioctl_rw_page_info info;
+	int result = PASS;
+
+	if (copy_from_user(&info, (void __user *)arg, sizeof(info)))
+		return -EFAULT;
+
+	buf = kmalloc(IdentifyDeviceData.PageDataSize, GFP_ATOMIC);
+	if (!buf) {
+		printk(KERN_ERR "ioctl_write_page_data: "
+		       "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	if (copy_from_user(buf, (void __user *)info.data,
+			   IdentifyDeviceData.PageDataSize)) {
+		printk(KERN_ERR "ioctl_write_page_data: "
+		       "failed to copy user data\n");
+		kfree(buf);
+		return -EFAULT;
+	}
+
+	mutex_lock(&spectra_lock);
+	result = GLOB_FTL_Page_Write(buf,
+		(u64)info.page * IdentifyDeviceData.PageDataSize);
+	mutex_unlock(&spectra_lock);
+
+	kfree(buf);
+	return result;
+}
+
+/* Return how many blocks should be reserved for bad block replacement */
+static int get_res_blk_num_bad_blk(void)
+{
+	return IdentifyDeviceData.wDataBlockNum / 10;
+}
+
+/* Return how many blocks should be reserved for OS image */
+static int get_res_blk_num_os(void)
+{
+	u32 res_blks, blk_size;
+
+	blk_size = IdentifyDeviceData.PageDataSize *
+		IdentifyDeviceData.PagesPerBlock;
+
+	res_blks = (reserved_mb * 1024 * 1024) / blk_size;
+
+	if ((res_blks < 1) || (res_blks >= IdentifyDeviceData.wDataBlockNum))
+		res_blks = 1; /* Reserved 1 block for block table */
+
+	return res_blks;
+}
+
+static void SBD_prepare_flush(struct request_queue *q, struct request *rq)
+{
+	rq->cmd_type = REQ_TYPE_LINUX_BLOCK;
+	/* rq->timeout = 5 * HZ; */
+	rq->cmd[0] = REQ_LB_OP_FLUSH;
+}
+
+/* Transfer a full request. */
+static int do_transfer(struct spectra_nand_dev *tr, struct request *req)
+{
+	u64 start_addr, addr;
+	u32 logical_start_sect, hd_start_sect;
+	u32 nsect, hd_sects;
+	u32 rsect, tsect = 0;
+	char *buf;
+	u32 ratio = IdentifyDeviceData.PageDataSize >> 9;
+
+	start_addr = (u64)(blk_rq_pos(req)) << 9;
+	/* Add a big enough offset to prevent the OS Image from
+	*  being accessed or damaged by file system */
+	start_addr += IdentifyDeviceData.PageDataSize *
+			IdentifyDeviceData.PagesPerBlock *
+			res_blks_os;
+
+	if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
+			req->cmd[0] == REQ_LB_OP_FLUSH) {
+		if (force_flush_cache()) /* Fail to flush cache */
+			return -EIO;
+		else
+			return 0;
+	}
+
+	if (req->cmd_type != REQ_TYPE_FS)
+		return -EIO;
+
+	if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > get_capacity(tr->gd)) {
+		printk(KERN_ERR "Spectra error: request over the NAND "
+			"capacity!sector %d, current_nr_sectors %d, "
+			"while capacity is %d\n",
+			(int)blk_rq_pos(req),
+			blk_rq_cur_sectors(req),
+			(int)get_capacity(tr->gd));
+		return -EIO;
+	}
+
+	logical_start_sect = start_addr >> 9;
+	hd_start_sect = logical_start_sect / ratio;
+	rsect = logical_start_sect - hd_start_sect * ratio;
+
+	addr = (u64)hd_start_sect * ratio * 512;
+	buf = req->buffer;
+	nsect = blk_rq_cur_sectors(req);
+
+	if (rsect)
+		tsect =  (ratio - rsect) < nsect ? (ratio - rsect) : nsect;
+
+	switch (rq_data_dir(req)) {
+	case READ:
+		/* Read the first NAND page */
+		if (rsect) {
+			if (GLOB_FTL_Page_Read(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			memcpy(buf, tr->tmp_buf + (rsect << 9), tsect << 9);
+			addr += IdentifyDeviceData.PageDataSize;
+			buf += tsect << 9;
+			nsect -= tsect;
+		}
+
+		/* Read the other NAND pages */
+		for (hd_sects = nsect / ratio; hd_sects > 0; hd_sects--) {
+			if (GLOB_FTL_Page_Read(buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			addr += IdentifyDeviceData.PageDataSize;
+			buf += IdentifyDeviceData.PageDataSize;
+		}
+
+		/* Read the last NAND pages */
+		if (nsect % ratio) {
+			if (GLOB_FTL_Page_Read(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			memcpy(buf, tr->tmp_buf, (nsect % ratio) << 9);
+		}
+#if CMD_DMA
+		if (glob_ftl_execute_cmds())
+			return -EIO;
+		else
+			return 0;
+#endif
+		return 0;
+
+	case WRITE:
+		/* Write the first NAND page */
+		if (rsect) {
+			if (GLOB_FTL_Page_Read(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			memcpy(tr->tmp_buf + (rsect << 9), buf, tsect << 9);
+			if (GLOB_FTL_Page_Write(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			addr += IdentifyDeviceData.PageDataSize;
+			buf += tsect << 9;
+			nsect -= tsect;
+		}
+
+		/* Write the other NAND pages */
+		for (hd_sects = nsect / ratio; hd_sects > 0; hd_sects--) {
+			if (GLOB_FTL_Page_Write(buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			addr += IdentifyDeviceData.PageDataSize;
+			buf += IdentifyDeviceData.PageDataSize;
+		}
+
+		/* Write the last NAND pages */
+		if (nsect % ratio) {
+			if (GLOB_FTL_Page_Read(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+			memcpy(tr->tmp_buf, buf, (nsect % ratio) << 9);
+			if (GLOB_FTL_Page_Write(tr->tmp_buf, addr)) {
+				printk(KERN_ERR "Error in %s, Line %d\n",
+					__FILE__, __LINE__);
+				return -EIO;
+			}
+		}
+#if CMD_DMA
+		if (glob_ftl_execute_cmds())
+			return -EIO;
+		else
+			return 0;
+#endif
+		return 0;
+
+	default:
+		printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req));
+		return -EIO;
+	}
+}
+
+/* This function is copied from drivers/mtd/mtd_blkdevs.c */
+static int spectra_trans_thread(void *arg)
+{
+	struct spectra_nand_dev *tr = arg;
+	struct request_queue *rq = tr->queue;
+	struct request *req = NULL;
+
+	/* we might get involved when memory gets low, so use PF_MEMALLOC */
+	current->flags |= PF_MEMALLOC;
+
+	spin_lock_irq(rq->queue_lock);
+	while (!kthread_should_stop()) {
+		int res;
+
+		if (!req) {
+			req = blk_fetch_request(rq);
+			if (!req) {
+				set_current_state(TASK_INTERRUPTIBLE);
+				spin_unlock_irq(rq->queue_lock);
+				schedule();
+				spin_lock_irq(rq->queue_lock);
+				continue;
+			}
+		}
+
+		spin_unlock_irq(rq->queue_lock);
+
+		mutex_lock(&spectra_lock);
+		res = do_transfer(tr, req);
+		mutex_unlock(&spectra_lock);
+
+		spin_lock_irq(rq->queue_lock);
+
+		if (!__blk_end_request_cur(req, res))
+			req = NULL;
+	}
+
+	if (req)
+		__blk_end_request_all(req, -EIO);
+
+	spin_unlock_irq(rq->queue_lock);
+
+	return 0;
+}
+
+
+/* Request function that "handles clustering". */
+static void GLOB_SBD_request(struct request_queue *rq)
+{
+	struct spectra_nand_dev *pdev = rq->queuedata;
+	wake_up_process(pdev->thread);
+}
+
+static int GLOB_SBD_open(struct block_device *bdev, fmode_t mode)
+
+{
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+	return 0;
+}
+
+static int GLOB_SBD_release(struct gendisk *disk, fmode_t mode)
+{
+	int ret;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	mutex_lock(&spectra_lock);
+	ret = force_flush_cache();
+	mutex_unlock(&spectra_lock);
+
+	return 0;
+}
+
+static int GLOB_SBD_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	geo->heads = 4;
+	geo->sectors = 16;
+	geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"heads: %d, sectors: %d, cylinders: %d\n",
+		geo->heads, geo->sectors, geo->cylinders);
+
+	return 0;
+}
+
+int GLOB_SBD_ioctl(struct block_device *bdev, fmode_t mode,
+		unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	switch (cmd) {
+	case GLOB_SBD_IOCTL_GC:
+		nand_dbg_print(NAND_DBG_DEBUG,
+			       "Spectra IOCTL: Garbage Collection "
+			       "being performed\n");
+		if (PASS != GLOB_FTL_Garbage_Collection())
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_WL:
+		nand_dbg_print(NAND_DBG_DEBUG,
+			       "Spectra IOCTL: Static Wear Leveling "
+			       "being performed\n");
+		if (PASS != GLOB_FTL_Wear_Leveling())
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_FORMAT:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: Flash format "
+			       "being performed\n");
+		if (PASS != GLOB_FTL_Flash_Format())
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_FLUSH_CACHE:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: Cache flush "
+			       "being performed\n");
+		mutex_lock(&spectra_lock);
+		ret = force_flush_cache();
+		mutex_unlock(&spectra_lock);
+		return ret;
+
+	case GLOB_SBD_IOCTL_COPY_BLK_TABLE:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: "
+			       "Copy block table\n");
+		if (copy_to_user((void __user *)arg,
+			get_blk_table_start_addr(),
+			get_blk_table_len()))
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_COPY_WEAR_LEVELING_TABLE:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: "
+			       "Copy wear leveling table\n");
+		if (copy_to_user((void __user *)arg,
+			get_wear_leveling_table_start_addr(),
+			get_wear_leveling_table_len()))
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_GET_NAND_INFO:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: "
+			       "Get NAND info\n");
+		if (copy_to_user((void __user *)arg, &IdentifyDeviceData,
+			sizeof(IdentifyDeviceData)))
+			return -EFAULT;
+		return 0;
+
+	case GLOB_SBD_IOCTL_WRITE_DATA:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: "
+			       "Write one page data\n");
+		return ioctl_write_page_data(arg);
+
+	case GLOB_SBD_IOCTL_READ_DATA:
+		nand_dbg_print(NAND_DBG_DEBUG, "Spectra IOCTL: "
+			       "Read one page data\n");
+		return ioctl_read_page_data(arg);
+	}
+
+	return -ENOTTY;
+}
+
+static struct block_device_operations GLOB_SBD_ops = {
+	.owner = THIS_MODULE,
+	.open = GLOB_SBD_open,
+	.release = GLOB_SBD_release,
+	.locked_ioctl = GLOB_SBD_ioctl,
+	.getgeo = GLOB_SBD_getgeo,
+};
+
+static int SBD_setup_device(struct spectra_nand_dev *dev, int which)
+{
+	int res_blks;
+	u32 sects;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	memset(dev, 0, sizeof(struct spectra_nand_dev));
+
+	nand_dbg_print(NAND_DBG_WARN, "Reserved %d blocks "
+		"for OS image, %d blocks for bad block replacement.\n",
+		get_res_blk_num_os(),
+		get_res_blk_num_bad_blk());
+
+	res_blks = get_res_blk_num_bad_blk() + get_res_blk_num_os();
+
+	dev->size = (u64)IdentifyDeviceData.PageDataSize *
+		IdentifyDeviceData.PagesPerBlock *
+		(IdentifyDeviceData.wDataBlockNum - res_blks);
+
+	res_blks_os = get_res_blk_num_os();
+
+	spin_lock_init(&dev->qlock);
+
+	dev->tmp_buf = kmalloc(IdentifyDeviceData.PageDataSize, GFP_ATOMIC);
+	if (!dev->tmp_buf) {
+		printk(KERN_ERR "Failed to kmalloc memory in %s Line %d, exit.\n",
+			__FILE__, __LINE__);
+		goto out_vfree;
+	}
+
+	dev->queue = blk_init_queue(GLOB_SBD_request, &dev->qlock);
+	if (dev->queue == NULL) {
+		printk(KERN_ERR
+		       "Spectra: Request queue could not be initialized."
+			" Aborting\n ");
+		goto out_vfree;
+	}
+	dev->queue->queuedata = dev;
+
+	/* As Linux block layer doens't support >4KB hardware sector,  */
+	/* Here we force report 512 byte hardware sector size to Kernel */
+	blk_queue_logical_block_size(dev->queue, 512);
+
+	blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH,
+					SBD_prepare_flush);
+
+	dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
+	if (IS_ERR(dev->thread)) {
+		blk_cleanup_queue(dev->queue);
+		unregister_blkdev(GLOB_SBD_majornum, GLOB_SBD_NAME);
+		return PTR_ERR(dev->thread);
+	}
+
+	dev->gd = alloc_disk(PARTITIONS);
+	if (!dev->gd) {
+		printk(KERN_ERR
+		       "Spectra: Could not allocate disk. Aborting \n ");
+		goto out_vfree;
+	}
+	dev->gd->major = GLOB_SBD_majornum;
+	dev->gd->first_minor = which * PARTITIONS;
+	dev->gd->fops = &GLOB_SBD_ops;
+	dev->gd->queue = dev->queue;
+	dev->gd->private_data = dev;
+	snprintf(dev->gd->disk_name, 32, "%s%c", GLOB_SBD_NAME, which + 'a');
+
+	sects = dev->size >> 9;
+	nand_dbg_print(NAND_DBG_WARN, "Capacity sects: %d\n", sects);
+	set_capacity(dev->gd, sects);
+
+	add_disk(dev->gd);
+
+	return 0;
+out_vfree:
+	return -ENOMEM;
+}
+
+/*
+static ssize_t show_nand_block_num(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		(int)IdentifyDeviceData.wDataBlockNum);
+}
+
+static ssize_t show_nand_pages_per_block(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		(int)IdentifyDeviceData.PagesPerBlock);
+}
+
+static ssize_t show_nand_page_size(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+		(int)IdentifyDeviceData.PageDataSize);
+}
+
+static DEVICE_ATTR(nand_block_num, 0444, show_nand_block_num, NULL);
+static DEVICE_ATTR(nand_pages_per_block, 0444, show_nand_pages_per_block, NULL);
+static DEVICE_ATTR(nand_page_size, 0444, show_nand_page_size, NULL);
+
+static void create_sysfs_entry(struct device *dev)
+{
+	if (device_create_file(dev, &dev_attr_nand_block_num))
+		printk(KERN_ERR "Spectra: "
+			"failed to create sysfs entry nand_block_num.\n");
+	if (device_create_file(dev, &dev_attr_nand_pages_per_block))
+		printk(KERN_ERR "Spectra: "
+		"failed to create sysfs entry nand_pages_per_block.\n");
+	if (device_create_file(dev, &dev_attr_nand_page_size))
+		printk(KERN_ERR "Spectra: "
+		"failed to create sysfs entry nand_page_size.\n");
+}
+*/
+
+static int GLOB_SBD_init(void)
+{
+	int i;
+
+	/* Set debug output level (0~3) here. 3 is most verbose */
+	printk(KERN_ALERT "Spectra: %s\n", GLOB_version);
+
+	mutex_init(&spectra_lock);
+
+	GLOB_SBD_majornum = register_blkdev(0, GLOB_SBD_NAME);
+	if (GLOB_SBD_majornum <= 0) {
+		printk(KERN_ERR "Unable to get the major %d for Spectra",
+		       GLOB_SBD_majornum);
+		return -EBUSY;
+	}
+
+	if (PASS != GLOB_FTL_Flash_Init()) {
+		printk(KERN_ERR "Spectra: Unable to Initialize Flash Device. "
+		       "Aborting\n");
+		goto out_flash_register;
+	}
+
+	/* create_sysfs_entry(&dev->dev); */
+
+	if (PASS != GLOB_FTL_IdentifyDevice(&IdentifyDeviceData)) {
+		printk(KERN_ERR "Spectra: Unable to Read Flash Device. "
+		       "Aborting\n");
+		goto out_flash_register;
+	} else {
+		nand_dbg_print(NAND_DBG_WARN, "In GLOB_SBD_init: "
+			       "Num blocks=%d, pagesperblock=%d, "
+			       "pagedatasize=%d, ECCBytesPerSector=%d\n",
+		       (int)IdentifyDeviceData.NumBlocks,
+		       (int)IdentifyDeviceData.PagesPerBlock,
+		       (int)IdentifyDeviceData.PageDataSize,
+		       (int)IdentifyDeviceData.wECCBytesPerSector);
+	}
+
+	printk(KERN_ALERT "Spectra: searching block table, please wait ...\n");
+	if (GLOB_FTL_Init() != PASS) {
+		printk(KERN_ERR "Spectra: Unable to Initialize FTL Layer. "
+		       "Aborting\n");
+		goto out_ftl_flash_register;
+	}
+	printk(KERN_ALERT "Spectra: block table has been found.\n");
+
+	for (i = 0; i < NUM_DEVICES; i++)
+		if (SBD_setup_device(&nand_device[i], i) == -ENOMEM)
+			goto out_ftl_flash_register;
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		       "Spectra: module loaded with major number %d\n",
+		       GLOB_SBD_majornum);
+
+	return 0;
+
+out_ftl_flash_register:
+	GLOB_FTL_Cache_Release();
+out_flash_register:
+	GLOB_FTL_Flash_Release();
+	unregister_blkdev(GLOB_SBD_majornum, GLOB_SBD_NAME);
+	printk(KERN_ERR "Spectra: Module load failed.\n");
+
+	return -ENOMEM;
+}
+
+static void __exit GLOB_SBD_exit(void)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < NUM_DEVICES; i++) {
+		struct spectra_nand_dev *dev = &nand_device[i];
+		if (dev->gd) {
+			del_gendisk(dev->gd);
+			put_disk(dev->gd);
+		}
+		if (dev->queue)
+			blk_cleanup_queue(dev->queue);
+		kfree(dev->tmp_buf);
+	}
+
+	unregister_blkdev(GLOB_SBD_majornum, GLOB_SBD_NAME);
+
+	mutex_lock(&spectra_lock);
+	force_flush_cache();
+	mutex_unlock(&spectra_lock);
+
+	GLOB_FTL_Cache_Release();
+
+	GLOB_FTL_Flash_Release();
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		       "Spectra FTL module (major number %d) unloaded.\n",
+		       GLOB_SBD_majornum);
+}
+
+module_init(GLOB_SBD_init);
+module_exit(GLOB_SBD_exit);
diff --git a/drivers/staging/spectra/ffsport.h b/drivers/staging/spectra/ffsport.h
new file mode 100644
index 00000000000..6c5d90c5343
--- /dev/null
+++ b/drivers/staging/spectra/ffsport.h
@@ -0,0 +1,84 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _FFSPORT_
+#define _FFSPORT_
+
+#include "ffsdefs.h"
+
+#if defined __GNUC__
+#define PACKED
+#define PACKED_GNU __attribute__ ((packed))
+#define UNALIGNED
+#endif
+
+#include <linux/semaphore.h>
+#include <linux/string.h>	/* for strcpy(), stricmp(), etc */
+#include <linux/mm.h>		/* for kmalloc(), kfree() */
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>	/* printk() */
+#include <linux/fs.h>		/* everything... */
+#include <linux/errno.h>	/* error codes */
+#include <linux/types.h>	/* size_t */
+#include <linux/genhd.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/pci.h>
+#include "flash.h"
+
+#define VERBOSE    1
+
+#define NAND_DBG_WARN  1
+#define NAND_DBG_DEBUG 2
+#define NAND_DBG_TRACE 3
+
+extern int nand_debug_level;
+
+#ifdef VERBOSE
+#define nand_dbg_print(level, args...)			\
+	do {						\
+		if (level <= nand_debug_level)		\
+			printk(KERN_ALERT args);	\
+	} while (0)
+#else
+#define nand_dbg_print(level, args...)
+#endif
+
+#ifdef SUPPORT_BIG_ENDIAN
+#define INVERTUINT16(w)   ((u16)(((u16)(w)) << 8) | \
+			   (u16)((u16)(w) >> 8))
+
+#define INVERTUINT32(dw)  (((u32)(dw) << 24) | \
+			   (((u32)(dw) << 8) & 0x00ff0000) | \
+			   (((u32)(dw) >> 8) & 0x0000ff00) | \
+			   ((u32)(dw) >> 24))
+#else
+#define INVERTUINT16(w)   w
+#define INVERTUINT32(dw)  dw
+#endif
+
+extern int GLOB_Calc_Used_Bits(u32 n);
+extern u64 GLOB_u64_Div(u64 addr, u32 divisor);
+extern u64 GLOB_u64_Remainder(u64 addr, u32 divisor_type);
+
+#endif /* _FFSPORT_ */
diff --git a/drivers/staging/spectra/flash.c b/drivers/staging/spectra/flash.c
new file mode 100644
index 00000000000..134aa5166a8
--- /dev/null
+++ b/drivers/staging/spectra/flash.c
@@ -0,0 +1,4731 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+
+#include "flash.h"
+#include "ffsdefs.h"
+#include "lld.h"
+#include "lld_nand.h"
+#if CMD_DMA
+#include "lld_cdma.h"
+#endif
+
+#define BLK_FROM_ADDR(addr)  ((u32)(addr >> DeviceInfo.nBitsInBlockDataSize))
+#define PAGE_FROM_ADDR(addr, Block)  ((u16)((addr - (u64)Block * \
+	DeviceInfo.wBlockDataSize) >> DeviceInfo.nBitsInPageDataSize))
+
+#define IS_SPARE_BLOCK(blk)     (BAD_BLOCK != (pbt[blk] &\
+	BAD_BLOCK) && SPARE_BLOCK == (pbt[blk] & SPARE_BLOCK))
+
+#define IS_DATA_BLOCK(blk)      (0 == (pbt[blk] & BAD_BLOCK))
+
+#define IS_DISCARDED_BLOCK(blk) (BAD_BLOCK != (pbt[blk] &\
+	BAD_BLOCK) && DISCARD_BLOCK == (pbt[blk] & DISCARD_BLOCK))
+
+#define IS_BAD_BLOCK(blk)       (BAD_BLOCK == (pbt[blk] & BAD_BLOCK))
+
+#if DEBUG_BNDRY
+void debug_boundary_lineno_error(int chnl, int limit, int no,
+				int lineno, char *filename)
+{
+	if (chnl >= limit)
+		printk(KERN_ERR "Boundary Check Fail value %d >= limit %d, "
+		"at  %s:%d. Other info:%d. Aborting...\n",
+		chnl, limit, filename, lineno, no);
+}
+/* static int globalmemsize; */
+#endif
+
+static u16 FTL_Cache_If_Hit(u64 dwPageAddr);
+static int FTL_Cache_Read(u64 dwPageAddr);
+static void FTL_Cache_Read_Page(u8 *pData, u64 dwPageAddr,
+				u16 cache_blk);
+static void FTL_Cache_Write_Page(u8 *pData, u64 dwPageAddr,
+				 u8 cache_blk, u16 flag);
+static int FTL_Cache_Write(void);
+static int FTL_Cache_Write_Back(u8 *pData, u64 blk_addr);
+static void FTL_Calculate_LRU(void);
+static u32 FTL_Get_Block_Index(u32 wBlockNum);
+
+static int FTL_Search_Block_Table_IN_Block(u32 BT_Block,
+					   u8 BT_Tag, u16 *Page);
+static int FTL_Read_Block_Table(void);
+static int FTL_Write_Block_Table(int wForce);
+static int FTL_Write_Block_Table_Data(void);
+static int FTL_Check_Block_Table(int wOldTable);
+static int FTL_Static_Wear_Leveling(void);
+static u32 FTL_Replace_Block_Table(void);
+static int FTL_Write_IN_Progress_Block_Table_Page(void);
+
+static u32 FTL_Get_Page_Num(u64 length);
+static u64 FTL_Get_Physical_Block_Addr(u64 blk_addr);
+
+static u32 FTL_Replace_OneBlock(u32 wBlockNum,
+				      u32 wReplaceNum);
+static u32 FTL_Replace_LWBlock(u32 wBlockNum,
+				     int *pGarbageCollect);
+static u32 FTL_Replace_MWBlock(void);
+static int FTL_Replace_Block(u64 blk_addr);
+static int FTL_Adjust_Relative_Erase_Count(u32 Index_of_MAX);
+
+static int FTL_Flash_Error_Handle(u8 *pData, u64 old_page_addr, u64 blk_addr);
+
+struct device_info_tag DeviceInfo;
+struct flash_cache_tag Cache;
+static struct spectra_l2_cache_info cache_l2;
+
+static u8 *cache_l2_page_buf;
+static u8 *cache_l2_blk_buf;
+
+u8 *g_pBlockTable;
+u8 *g_pWearCounter;
+u16 *g_pReadCounter;
+u32 *g_pBTBlocks;
+static u16 g_wBlockTableOffset;
+static u32 g_wBlockTableIndex;
+static u8 g_cBlockTableStatus;
+
+static u8 *g_pTempBuf;
+static u8 *flag_check_blk_table;
+static u8 *tmp_buf_search_bt_in_block;
+static u8 *spare_buf_search_bt_in_block;
+static u8 *spare_buf_bt_search_bt_in_block;
+static u8 *tmp_buf1_read_blk_table;
+static u8 *tmp_buf2_read_blk_table;
+static u8 *flags_static_wear_leveling;
+static u8 *tmp_buf_write_blk_table_data;
+static u8 *tmp_buf_read_disturbance;
+
+u8 *buf_read_page_main_spare;
+u8 *buf_write_page_main_spare;
+u8 *buf_read_page_spare;
+u8 *buf_get_bad_block;
+
+#if (RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE && CMD_DMA)
+struct flash_cache_delta_list_tag int_cache[MAX_CHANS + MAX_DESCS];
+struct flash_cache_tag cache_start_copy;
+#endif
+
+int g_wNumFreeBlocks;
+u8 g_SBDCmdIndex;
+
+static u8 *g_pIPF;
+static u8 bt_flag = FIRST_BT_ID;
+static u8 bt_block_changed;
+
+static u16 cache_block_to_write;
+static u8 last_erased = FIRST_BT_ID;
+
+static u8 GC_Called;
+static u8 BT_GC_Called;
+
+#if CMD_DMA
+#define COPY_BACK_BUF_NUM 10
+
+static u8 ftl_cmd_cnt;  /* Init value is 0 */
+u8 *g_pBTDelta;
+u8 *g_pBTDelta_Free;
+u8 *g_pBTStartingCopy;
+u8 *g_pWearCounterCopy;
+u16 *g_pReadCounterCopy;
+u8 *g_pBlockTableCopies;
+u8 *g_pNextBlockTable;
+static u8 *cp_back_buf_copies[COPY_BACK_BUF_NUM];
+static int cp_back_buf_idx;
+
+static u8 *g_temp_buf;
+
+#pragma pack(push, 1)
+#pragma pack(1)
+struct BTableChangesDelta {
+	u8 ftl_cmd_cnt;
+	u8 ValidFields;
+	u16 g_wBlockTableOffset;
+	u32 g_wBlockTableIndex;
+	u32 BT_Index;
+	u32 BT_Entry_Value;
+	u32 WC_Index;
+	u8 WC_Entry_Value;
+	u32 RC_Index;
+	u16 RC_Entry_Value;
+};
+
+#pragma pack(pop)
+
+struct BTableChangesDelta *p_BTableChangesDelta;
+#endif
+
+
+#define MARK_BLOCK_AS_BAD(blocknode)      (blocknode |= BAD_BLOCK)
+#define MARK_BLK_AS_DISCARD(blk)  (blk = (blk & ~SPARE_BLOCK) | DISCARD_BLOCK)
+
+#define FTL_Get_LBAPBA_Table_Mem_Size_Bytes() (DeviceInfo.wDataBlockNum *\
+						sizeof(u32))
+#define FTL_Get_WearCounter_Table_Mem_Size_Bytes() (DeviceInfo.wDataBlockNum *\
+						sizeof(u8))
+#define FTL_Get_ReadCounter_Table_Mem_Size_Bytes() (DeviceInfo.wDataBlockNum *\
+						sizeof(u16))
+#if SUPPORT_LARGE_BLOCKNUM
+#define FTL_Get_LBAPBA_Table_Flash_Size_Bytes() (DeviceInfo.wDataBlockNum *\
+						sizeof(u8) * 3)
+#else
+#define FTL_Get_LBAPBA_Table_Flash_Size_Bytes() (DeviceInfo.wDataBlockNum *\
+						sizeof(u16))
+#endif
+#define FTL_Get_WearCounter_Table_Flash_Size_Bytes \
+	FTL_Get_WearCounter_Table_Mem_Size_Bytes
+#define FTL_Get_ReadCounter_Table_Flash_Size_Bytes \
+	FTL_Get_ReadCounter_Table_Mem_Size_Bytes
+
+static u32 FTL_Get_Block_Table_Flash_Size_Bytes(void)
+{
+	u32 byte_num;
+
+	if (DeviceInfo.MLCDevice) {
+		byte_num = FTL_Get_LBAPBA_Table_Flash_Size_Bytes() +
+			DeviceInfo.wDataBlockNum * sizeof(u8) +
+			DeviceInfo.wDataBlockNum * sizeof(u16);
+	} else {
+		byte_num = FTL_Get_LBAPBA_Table_Flash_Size_Bytes() +
+			DeviceInfo.wDataBlockNum * sizeof(u8);
+	}
+
+	byte_num += 4 * sizeof(u8);
+
+	return byte_num;
+}
+
+static u16  FTL_Get_Block_Table_Flash_Size_Pages(void)
+{
+	return (u16)FTL_Get_Page_Num(FTL_Get_Block_Table_Flash_Size_Bytes());
+}
+
+static int FTL_Copy_Block_Table_To_Flash(u8 *flashBuf, u32 sizeToTx,
+					u32 sizeTxed)
+{
+	u32 wBytesCopied, blk_tbl_size, wBytes;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	blk_tbl_size = FTL_Get_LBAPBA_Table_Flash_Size_Bytes();
+	for (wBytes = 0;
+	(wBytes < sizeToTx) && ((wBytes + sizeTxed) < blk_tbl_size);
+	wBytes++) {
+#if SUPPORT_LARGE_BLOCKNUM
+		flashBuf[wBytes] = (u8)(pbt[(wBytes + sizeTxed) / 3]
+		>> (((wBytes + sizeTxed) % 3) ?
+		((((wBytes + sizeTxed) % 3) == 2) ? 0 : 8) : 16)) & 0xFF;
+#else
+		flashBuf[wBytes] = (u8)(pbt[(wBytes + sizeTxed) / 2]
+		>> (((wBytes + sizeTxed) % 2) ? 0 : 8)) & 0xFF;
+#endif
+	}
+
+	sizeTxed = (sizeTxed > blk_tbl_size) ? (sizeTxed - blk_tbl_size) : 0;
+	blk_tbl_size = FTL_Get_WearCounter_Table_Flash_Size_Bytes();
+	wBytesCopied = wBytes;
+	wBytes = ((blk_tbl_size - sizeTxed) > (sizeToTx - wBytesCopied)) ?
+		(sizeToTx - wBytesCopied) : (blk_tbl_size - sizeTxed);
+	memcpy(flashBuf + wBytesCopied, g_pWearCounter + sizeTxed, wBytes);
+
+	sizeTxed = (sizeTxed > blk_tbl_size) ? (sizeTxed - blk_tbl_size) : 0;
+
+	if (DeviceInfo.MLCDevice) {
+		blk_tbl_size = FTL_Get_ReadCounter_Table_Flash_Size_Bytes();
+		wBytesCopied += wBytes;
+		for (wBytes = 0; ((wBytes + wBytesCopied) < sizeToTx) &&
+			((wBytes + sizeTxed) < blk_tbl_size); wBytes++)
+			flashBuf[wBytes + wBytesCopied] =
+			(g_pReadCounter[(wBytes + sizeTxed) / 2] >>
+			(((wBytes + sizeTxed) % 2) ? 0 : 8)) & 0xFF;
+	}
+
+	return wBytesCopied + wBytes;
+}
+
+static int FTL_Copy_Block_Table_From_Flash(u8 *flashBuf,
+				u32 sizeToTx, u32 sizeTxed)
+{
+	u32 wBytesCopied, blk_tbl_size, wBytes;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	blk_tbl_size = FTL_Get_LBAPBA_Table_Flash_Size_Bytes();
+	for (wBytes = 0; (wBytes < sizeToTx) &&
+		((wBytes + sizeTxed) < blk_tbl_size); wBytes++) {
+#if SUPPORT_LARGE_BLOCKNUM
+		if (!((wBytes + sizeTxed) % 3))
+			pbt[(wBytes + sizeTxed) / 3] = 0;
+		pbt[(wBytes + sizeTxed) / 3] |=
+			(flashBuf[wBytes] << (((wBytes + sizeTxed) % 3) ?
+			((((wBytes + sizeTxed) % 3) == 2) ? 0 : 8) : 16));
+#else
+		if (!((wBytes + sizeTxed) % 2))
+			pbt[(wBytes + sizeTxed) / 2] = 0;
+		pbt[(wBytes + sizeTxed) / 2] |=
+			(flashBuf[wBytes] << (((wBytes + sizeTxed) % 2) ?
+			0 : 8));
+#endif
+	}
+
+	sizeTxed = (sizeTxed > blk_tbl_size) ? (sizeTxed - blk_tbl_size) : 0;
+	blk_tbl_size = FTL_Get_WearCounter_Table_Flash_Size_Bytes();
+	wBytesCopied = wBytes;
+	wBytes = ((blk_tbl_size - sizeTxed) > (sizeToTx - wBytesCopied)) ?
+		(sizeToTx - wBytesCopied) : (blk_tbl_size - sizeTxed);
+	memcpy(g_pWearCounter + sizeTxed, flashBuf + wBytesCopied, wBytes);
+	sizeTxed = (sizeTxed > blk_tbl_size) ? (sizeTxed - blk_tbl_size) : 0;
+
+	if (DeviceInfo.MLCDevice) {
+		wBytesCopied += wBytes;
+		blk_tbl_size = FTL_Get_ReadCounter_Table_Flash_Size_Bytes();
+		for (wBytes = 0; ((wBytes + wBytesCopied) < sizeToTx) &&
+			((wBytes + sizeTxed) < blk_tbl_size); wBytes++) {
+			if (((wBytes + sizeTxed) % 2))
+				g_pReadCounter[(wBytes + sizeTxed) / 2] = 0;
+			g_pReadCounter[(wBytes + sizeTxed) / 2] |=
+				(flashBuf[wBytes] <<
+				(((wBytes + sizeTxed) % 2) ? 0 : 8));
+		}
+	}
+
+	return wBytesCopied+wBytes;
+}
+
+static int FTL_Insert_Block_Table_Signature(u8 *buf, u8 tag)
+{
+	int i;
+
+	for (i = 0; i < BTSIG_BYTES; i++)
+		buf[BTSIG_OFFSET + i] =
+		((tag + (i * BTSIG_DELTA) - FIRST_BT_ID) %
+		(1 + LAST_BT_ID-FIRST_BT_ID)) + FIRST_BT_ID;
+
+	return PASS;
+}
+
+static int FTL_Extract_Block_Table_Tag(u8 *buf, u8 **tagarray)
+{
+	static u8 tag[BTSIG_BYTES >> 1];
+	int i, j, k, tagi, tagtemp, status;
+
+	*tagarray = (u8 *)tag;
+	tagi = 0;
+
+	for (i = 0; i < (BTSIG_BYTES - 1); i++) {
+		for (j = i + 1; (j < BTSIG_BYTES) &&
+			(tagi < (BTSIG_BYTES >> 1)); j++) {
+			tagtemp = buf[BTSIG_OFFSET + j] -
+				buf[BTSIG_OFFSET + i];
+			if (tagtemp && !(tagtemp % BTSIG_DELTA)) {
+				tagtemp = (buf[BTSIG_OFFSET + i] +
+					(1 + LAST_BT_ID - FIRST_BT_ID) -
+					(i * BTSIG_DELTA)) %
+					(1 + LAST_BT_ID - FIRST_BT_ID);
+				status = FAIL;
+				for (k = 0; k < tagi; k++) {
+					if (tagtemp == tag[k])
+						status = PASS;
+				}
+
+				if (status == FAIL) {
+					tag[tagi++] = tagtemp;
+					i = (j == (i + 1)) ? i + 1 : i;
+					j = (j == (i + 1)) ? i + 1 : i;
+				}
+			}
+		}
+	}
+
+	return tagi;
+}
+
+
+static int FTL_Execute_SPL_Recovery(void)
+{
+	u32 j, block, blks;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	int ret;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+				__FILE__, __LINE__, __func__);
+
+	blks = DeviceInfo.wSpectraEndBlock - DeviceInfo.wSpectraStartBlock;
+	for (j = 0; j <= blks; j++) {
+		block = (pbt[j]);
+		if (((block & BAD_BLOCK) != BAD_BLOCK) &&
+			((block & SPARE_BLOCK) == SPARE_BLOCK)) {
+			ret =  GLOB_LLD_Erase_Block(block & ~BAD_BLOCK);
+			if (FAIL == ret) {
+				nand_dbg_print(NAND_DBG_WARN,
+					"NAND Program fail in %s, Line %d, "
+					"Function: %s, new Bad Block %d "
+					"generated!\n",
+					__FILE__, __LINE__, __func__,
+					(int)(block & ~BAD_BLOCK));
+				MARK_BLOCK_AS_BAD(pbt[j]);
+			}
+		}
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_IdentifyDevice
+* Inputs:       pointer to identify data structure
+* Outputs:      PASS / FAIL
+* Description:  the identify data structure is filled in with
+*                   information for the block driver.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_IdentifyDevice(struct spectra_indentfy_dev_tag *dev_data)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+				__FILE__, __LINE__, __func__);
+
+	dev_data->NumBlocks = DeviceInfo.wTotalBlocks;
+	dev_data->PagesPerBlock = DeviceInfo.wPagesPerBlock;
+	dev_data->PageDataSize = DeviceInfo.wPageDataSize;
+	dev_data->wECCBytesPerSector = DeviceInfo.wECCBytesPerSector;
+	dev_data->wDataBlockNum = DeviceInfo.wDataBlockNum;
+
+	return PASS;
+}
+
+/* ..... */
+static int allocate_memory(void)
+{
+	u32 block_table_size, page_size, block_size, mem_size;
+	u32 total_bytes = 0;
+	int i;
+#if CMD_DMA
+	int j;
+#endif
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	page_size = DeviceInfo.wPageSize;
+	block_size = DeviceInfo.wPagesPerBlock * DeviceInfo.wPageDataSize;
+
+	block_table_size = DeviceInfo.wDataBlockNum *
+		(sizeof(u32) + sizeof(u8) + sizeof(u16));
+	block_table_size += (DeviceInfo.wPageDataSize -
+		(block_table_size % DeviceInfo.wPageDataSize)) %
+		DeviceInfo.wPageDataSize;
+
+	/* Malloc memory for block tables */
+	g_pBlockTable = kmalloc(block_table_size, GFP_ATOMIC);
+	if (!g_pBlockTable)
+		goto block_table_fail;
+	memset(g_pBlockTable, 0, block_table_size);
+	total_bytes += block_table_size;
+
+	g_pWearCounter = (u8 *)(g_pBlockTable +
+		DeviceInfo.wDataBlockNum * sizeof(u32));
+
+	if (DeviceInfo.MLCDevice)
+		g_pReadCounter = (u16 *)(g_pBlockTable +
+			DeviceInfo.wDataBlockNum *
+			(sizeof(u32) + sizeof(u8)));
+
+	/* Malloc memory and init for cache items */
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		Cache.array[i].address = NAND_CACHE_INIT_ADDR;
+		Cache.array[i].use_cnt = 0;
+		Cache.array[i].changed = CLEAR;
+		Cache.array[i].buf = kmalloc(Cache.cache_item_size,
+			GFP_ATOMIC);
+		if (!Cache.array[i].buf)
+			goto cache_item_fail;
+		memset(Cache.array[i].buf, 0, Cache.cache_item_size);
+		total_bytes += Cache.cache_item_size;
+	}
+
+	/* Malloc memory for IPF */
+	g_pIPF = kmalloc(page_size, GFP_ATOMIC);
+	if (!g_pIPF)
+		goto ipf_fail;
+	memset(g_pIPF, 0, page_size);
+	total_bytes += page_size;
+
+	/* Malloc memory for data merging during Level2 Cache flush */
+	cache_l2_page_buf = kmalloc(page_size, GFP_ATOMIC);
+	if (!cache_l2_page_buf)
+		goto cache_l2_page_buf_fail;
+	memset(cache_l2_page_buf, 0xff, page_size);
+	total_bytes += page_size;
+
+	cache_l2_blk_buf = kmalloc(block_size, GFP_ATOMIC);
+	if (!cache_l2_blk_buf)
+		goto cache_l2_blk_buf_fail;
+	memset(cache_l2_blk_buf, 0xff, block_size);
+	total_bytes += block_size;
+
+	/* Malloc memory for temp buffer */
+	g_pTempBuf = kmalloc(Cache.cache_item_size, GFP_ATOMIC);
+	if (!g_pTempBuf)
+		goto Temp_buf_fail;
+	memset(g_pTempBuf, 0, Cache.cache_item_size);
+	total_bytes += Cache.cache_item_size;
+
+	/* Malloc memory for block table blocks */
+	mem_size = (1 + LAST_BT_ID - FIRST_BT_ID) * sizeof(u32);
+	g_pBTBlocks = kmalloc(mem_size, GFP_ATOMIC);
+	if (!g_pBTBlocks)
+		goto bt_blocks_fail;
+	memset(g_pBTBlocks, 0xff, mem_size);
+	total_bytes += mem_size;
+
+	/* Malloc memory for function FTL_Check_Block_Table */
+	flag_check_blk_table = kmalloc(DeviceInfo.wDataBlockNum, GFP_ATOMIC);
+	if (!flag_check_blk_table)
+		goto flag_check_blk_table_fail;
+	total_bytes += DeviceInfo.wDataBlockNum;
+
+	/* Malloc memory for function FTL_Search_Block_Table_IN_Block */
+	tmp_buf_search_bt_in_block = kmalloc(page_size, GFP_ATOMIC);
+	if (!tmp_buf_search_bt_in_block)
+		goto tmp_buf_search_bt_in_block_fail;
+	memset(tmp_buf_search_bt_in_block, 0xff, page_size);
+	total_bytes += page_size;
+
+	mem_size = DeviceInfo.wPageSize - DeviceInfo.wPageDataSize;
+	spare_buf_search_bt_in_block = kmalloc(mem_size, GFP_ATOMIC);
+	if (!spare_buf_search_bt_in_block)
+		goto spare_buf_search_bt_in_block_fail;
+	memset(spare_buf_search_bt_in_block, 0xff, mem_size);
+	total_bytes += mem_size;
+
+	spare_buf_bt_search_bt_in_block = kmalloc(mem_size, GFP_ATOMIC);
+	if (!spare_buf_bt_search_bt_in_block)
+		goto spare_buf_bt_search_bt_in_block_fail;
+	memset(spare_buf_bt_search_bt_in_block, 0xff, mem_size);
+	total_bytes += mem_size;
+
+	/* Malloc memory for function FTL_Read_Block_Table */
+	tmp_buf1_read_blk_table = kmalloc(page_size, GFP_ATOMIC);
+	if (!tmp_buf1_read_blk_table)
+		goto tmp_buf1_read_blk_table_fail;
+	memset(tmp_buf1_read_blk_table, 0xff, page_size);
+	total_bytes += page_size;
+
+	tmp_buf2_read_blk_table = kmalloc(page_size, GFP_ATOMIC);
+	if (!tmp_buf2_read_blk_table)
+		goto tmp_buf2_read_blk_table_fail;
+	memset(tmp_buf2_read_blk_table, 0xff, page_size);
+	total_bytes += page_size;
+
+	/* Malloc memory for function FTL_Static_Wear_Leveling */
+	flags_static_wear_leveling = kmalloc(DeviceInfo.wDataBlockNum,
+					GFP_ATOMIC);
+	if (!flags_static_wear_leveling)
+		goto flags_static_wear_leveling_fail;
+	total_bytes += DeviceInfo.wDataBlockNum;
+
+	/* Malloc memory for function FTL_Write_Block_Table_Data */
+	if (FTL_Get_Block_Table_Flash_Size_Pages() > 3)
+		mem_size = FTL_Get_Block_Table_Flash_Size_Bytes() -
+				2 * DeviceInfo.wPageSize;
+	else
+		mem_size = DeviceInfo.wPageSize;
+	tmp_buf_write_blk_table_data = kmalloc(mem_size, GFP_ATOMIC);
+	if (!tmp_buf_write_blk_table_data)
+		goto tmp_buf_write_blk_table_data_fail;
+	memset(tmp_buf_write_blk_table_data, 0xff, mem_size);
+	total_bytes += mem_size;
+
+	/* Malloc memory for function FTL_Read_Disturbance */
+	tmp_buf_read_disturbance = kmalloc(block_size, GFP_ATOMIC);
+	if (!tmp_buf_read_disturbance)
+		goto tmp_buf_read_disturbance_fail;
+	memset(tmp_buf_read_disturbance, 0xff, block_size);
+	total_bytes += block_size;
+
+	/* Alloc mem for function NAND_Read_Page_Main_Spare of lld_nand.c */
+	buf_read_page_main_spare = kmalloc(DeviceInfo.wPageSize, GFP_ATOMIC);
+	if (!buf_read_page_main_spare)
+		goto buf_read_page_main_spare_fail;
+	total_bytes += DeviceInfo.wPageSize;
+
+	/* Alloc mem for function NAND_Write_Page_Main_Spare of lld_nand.c */
+	buf_write_page_main_spare = kmalloc(DeviceInfo.wPageSize, GFP_ATOMIC);
+	if (!buf_write_page_main_spare)
+		goto buf_write_page_main_spare_fail;
+	total_bytes += DeviceInfo.wPageSize;
+
+	/* Alloc mem for function NAND_Read_Page_Spare of lld_nand.c */
+	buf_read_page_spare = kmalloc(DeviceInfo.wPageSpareSize, GFP_ATOMIC);
+	if (!buf_read_page_spare)
+		goto buf_read_page_spare_fail;
+	memset(buf_read_page_spare, 0xff, DeviceInfo.wPageSpareSize);
+	total_bytes += DeviceInfo.wPageSpareSize;
+
+	/* Alloc mem for function NAND_Get_Bad_Block of lld_nand.c */
+	buf_get_bad_block = kmalloc(DeviceInfo.wPageSpareSize, GFP_ATOMIC);
+	if (!buf_get_bad_block)
+		goto buf_get_bad_block_fail;
+	memset(buf_get_bad_block, 0xff, DeviceInfo.wPageSpareSize);
+	total_bytes += DeviceInfo.wPageSpareSize;
+
+#if CMD_DMA
+	g_temp_buf = kmalloc(block_size, GFP_ATOMIC);
+	if (!g_temp_buf)
+		goto temp_buf_fail;
+	memset(g_temp_buf, 0xff, block_size);
+	total_bytes += block_size;
+
+	/* Malloc memory for copy of block table used in CDMA mode */
+	g_pBTStartingCopy = kmalloc(block_table_size, GFP_ATOMIC);
+	if (!g_pBTStartingCopy)
+		goto bt_starting_copy;
+	memset(g_pBTStartingCopy, 0, block_table_size);
+	total_bytes += block_table_size;
+
+	g_pWearCounterCopy = (u8 *)(g_pBTStartingCopy +
+		DeviceInfo.wDataBlockNum * sizeof(u32));
+
+	if (DeviceInfo.MLCDevice)
+		g_pReadCounterCopy = (u16 *)(g_pBTStartingCopy +
+			DeviceInfo.wDataBlockNum *
+			(sizeof(u32) + sizeof(u8)));
+
+	/* Malloc memory for block table copies */
+	mem_size = 5 * DeviceInfo.wDataBlockNum * sizeof(u32) +
+			5 * DeviceInfo.wDataBlockNum * sizeof(u8);
+	if (DeviceInfo.MLCDevice)
+		mem_size += 5 * DeviceInfo.wDataBlockNum * sizeof(u16);
+	g_pBlockTableCopies = kmalloc(mem_size, GFP_ATOMIC);
+	if (!g_pBlockTableCopies)
+		goto blk_table_copies_fail;
+	memset(g_pBlockTableCopies, 0, mem_size);
+	total_bytes += mem_size;
+	g_pNextBlockTable = g_pBlockTableCopies;
+
+	/* Malloc memory for Block Table Delta */
+	mem_size = MAX_DESCS * sizeof(struct BTableChangesDelta);
+	g_pBTDelta = kmalloc(mem_size, GFP_ATOMIC);
+	if (!g_pBTDelta)
+		goto bt_delta_fail;
+	memset(g_pBTDelta, 0, mem_size);
+	total_bytes += mem_size;
+	g_pBTDelta_Free = g_pBTDelta;
+
+	/* Malloc memory for Copy Back Buffers */
+	for (j = 0; j < COPY_BACK_BUF_NUM; j++) {
+		cp_back_buf_copies[j] = kmalloc(block_size, GFP_ATOMIC);
+		if (!cp_back_buf_copies[j])
+			goto cp_back_buf_copies_fail;
+		memset(cp_back_buf_copies[j], 0, block_size);
+		total_bytes += block_size;
+	}
+	cp_back_buf_idx = 0;
+
+	/* Malloc memory for pending commands list */
+	mem_size = sizeof(struct pending_cmd) * MAX_DESCS;
+	info.pcmds = kzalloc(mem_size, GFP_KERNEL);
+	if (!info.pcmds)
+		goto pending_cmds_buf_fail;
+	total_bytes += mem_size;
+
+	/* Malloc memory for CDMA descripter table */
+	mem_size = sizeof(struct cdma_descriptor) * MAX_DESCS;
+	info.cdma_desc_buf = kzalloc(mem_size, GFP_KERNEL);
+	if (!info.cdma_desc_buf)
+		goto cdma_desc_buf_fail;
+	total_bytes += mem_size;
+
+	/* Malloc memory for Memcpy descripter table */
+	mem_size = sizeof(struct memcpy_descriptor) * MAX_DESCS;
+	info.memcp_desc_buf = kzalloc(mem_size, GFP_KERNEL);
+	if (!info.memcp_desc_buf)
+		goto memcp_desc_buf_fail;
+	total_bytes += mem_size;
+#endif
+
+	nand_dbg_print(NAND_DBG_WARN,
+		"Total memory allocated in FTL layer: %d\n", total_bytes);
+
+	return PASS;
+
+#if CMD_DMA
+memcp_desc_buf_fail:
+	kfree(info.cdma_desc_buf);
+cdma_desc_buf_fail:
+	kfree(info.pcmds);
+pending_cmds_buf_fail:
+cp_back_buf_copies_fail:
+	j--;
+	for (; j >= 0; j--)
+		kfree(cp_back_buf_copies[j]);
+	kfree(g_pBTDelta);
+bt_delta_fail:
+	kfree(g_pBlockTableCopies);
+blk_table_copies_fail:
+	kfree(g_pBTStartingCopy);
+bt_starting_copy:
+	kfree(g_temp_buf);
+temp_buf_fail:
+	kfree(buf_get_bad_block);
+#endif
+
+buf_get_bad_block_fail:
+	kfree(buf_read_page_spare);
+buf_read_page_spare_fail:
+	kfree(buf_write_page_main_spare);
+buf_write_page_main_spare_fail:
+	kfree(buf_read_page_main_spare);
+buf_read_page_main_spare_fail:
+	kfree(tmp_buf_read_disturbance);
+tmp_buf_read_disturbance_fail:
+	kfree(tmp_buf_write_blk_table_data);
+tmp_buf_write_blk_table_data_fail:
+	kfree(flags_static_wear_leveling);
+flags_static_wear_leveling_fail:
+	kfree(tmp_buf2_read_blk_table);
+tmp_buf2_read_blk_table_fail:
+	kfree(tmp_buf1_read_blk_table);
+tmp_buf1_read_blk_table_fail:
+	kfree(spare_buf_bt_search_bt_in_block);
+spare_buf_bt_search_bt_in_block_fail:
+	kfree(spare_buf_search_bt_in_block);
+spare_buf_search_bt_in_block_fail:
+	kfree(tmp_buf_search_bt_in_block);
+tmp_buf_search_bt_in_block_fail:
+	kfree(flag_check_blk_table);
+flag_check_blk_table_fail:
+	kfree(g_pBTBlocks);
+bt_blocks_fail:
+	kfree(g_pTempBuf);
+Temp_buf_fail:
+	kfree(cache_l2_blk_buf);
+cache_l2_blk_buf_fail:
+	kfree(cache_l2_page_buf);
+cache_l2_page_buf_fail:
+	kfree(g_pIPF);
+ipf_fail:
+cache_item_fail:
+	i--;
+	for (; i >= 0; i--)
+		kfree(Cache.array[i].buf);
+	kfree(g_pBlockTable);
+block_table_fail:
+	printk(KERN_ERR "Failed to kmalloc memory in %s Line %d.\n",
+		__FILE__, __LINE__);
+
+	return -ENOMEM;
+}
+
+/* .... */
+static int free_memory(void)
+{
+	int i;
+
+#if CMD_DMA
+	kfree(info.memcp_desc_buf);
+	kfree(info.cdma_desc_buf);
+	kfree(info.pcmds);
+	for (i = COPY_BACK_BUF_NUM - 1; i >= 0; i--)
+		kfree(cp_back_buf_copies[i]);
+	kfree(g_pBTDelta);
+	kfree(g_pBlockTableCopies);
+	kfree(g_pBTStartingCopy);
+	kfree(g_temp_buf);
+	kfree(buf_get_bad_block);
+#endif
+	kfree(buf_read_page_spare);
+	kfree(buf_write_page_main_spare);
+	kfree(buf_read_page_main_spare);
+	kfree(tmp_buf_read_disturbance);
+	kfree(tmp_buf_write_blk_table_data);
+	kfree(flags_static_wear_leveling);
+	kfree(tmp_buf2_read_blk_table);
+	kfree(tmp_buf1_read_blk_table);
+	kfree(spare_buf_bt_search_bt_in_block);
+	kfree(spare_buf_search_bt_in_block);
+	kfree(tmp_buf_search_bt_in_block);
+	kfree(flag_check_blk_table);
+	kfree(g_pBTBlocks);
+	kfree(g_pTempBuf);
+	kfree(g_pIPF);
+	for (i = CACHE_ITEM_NUM - 1; i >= 0; i--)
+		kfree(Cache.array[i].buf);
+	kfree(g_pBlockTable);
+
+	return 0;
+}
+
+static void dump_cache_l2_table(void)
+{
+	struct list_head *p;
+	struct spectra_l2_cache_list *pnd;
+	int n, i;
+
+	n = 0;
+	list_for_each(p, &cache_l2.table.list) {
+		pnd = list_entry(p, struct spectra_l2_cache_list, list);
+		nand_dbg_print(NAND_DBG_WARN, "dump_cache_l2_table node: %d, logical_blk_num: %d\n", n, pnd->logical_blk_num);
+/*
+		for (i = 0; i < DeviceInfo.wPagesPerBlock; i++) {
+			if (pnd->pages_array[i] != MAX_U32_VALUE)
+				nand_dbg_print(NAND_DBG_WARN, "    pages_array[%d]: 0x%x\n", i, pnd->pages_array[i]);
+		}
+*/
+		n++;
+	}
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Init
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=1
+* Description:  allocates the memory for cache array,
+*               important data structures
+*               clears the cache array
+*               reads the block table from flash into array
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Init(void)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	Cache.pages_per_item = 1;
+	Cache.cache_item_size = 1 * DeviceInfo.wPageDataSize;
+
+	if (allocate_memory() != PASS)
+		return FAIL;
+
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	memcpy((void *)&cache_start_copy, (void *)&Cache,
+		sizeof(struct flash_cache_tag));
+	memset((void *)&int_cache, -1,
+		sizeof(struct flash_cache_delta_list_tag) *
+		(MAX_CHANS + MAX_DESCS));
+#endif
+	ftl_cmd_cnt = 0;
+#endif
+
+	if (FTL_Read_Block_Table() != PASS)
+		return FAIL;
+
+	/* Init the Level2 Cache data structure */
+	for (i = 0; i < BLK_NUM_FOR_L2_CACHE; i++)
+		cache_l2.blk_array[i] = MAX_U32_VALUE;
+	cache_l2.cur_blk_idx = 0;
+	cache_l2.cur_page_num = 0;
+	INIT_LIST_HEAD(&cache_l2.table.list);
+	cache_l2.table.logical_blk_num = MAX_U32_VALUE;
+
+	dump_cache_l2_table();
+
+	return 0;
+}
+
+
+#if CMD_DMA
+#if 0
+static void save_blk_table_changes(u16 idx)
+{
+	u8 ftl_cmd;
+	u32 *pbt = (u32 *)g_pBTStartingCopy;
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	u16 id;
+	u8 cache_blks;
+
+	id = idx - MAX_CHANS;
+	if (int_cache[id].item != -1) {
+		cache_blks = int_cache[id].item;
+		cache_start_copy.array[cache_blks].address =
+			int_cache[id].cache.address;
+		cache_start_copy.array[cache_blks].changed =
+			int_cache[id].cache.changed;
+	}
+#endif
+
+	ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+
+	while (ftl_cmd <= PendingCMD[idx].Tag) {
+		if (p_BTableChangesDelta->ValidFields == 0x01) {
+			g_wBlockTableOffset =
+				p_BTableChangesDelta->g_wBlockTableOffset;
+		} else if (p_BTableChangesDelta->ValidFields == 0x0C) {
+			pbt[p_BTableChangesDelta->BT_Index] =
+				p_BTableChangesDelta->BT_Entry_Value;
+			debug_boundary_error(((
+				p_BTableChangesDelta->BT_Index)),
+				DeviceInfo.wDataBlockNum, 0);
+		} else if (p_BTableChangesDelta->ValidFields == 0x03) {
+			g_wBlockTableOffset =
+				p_BTableChangesDelta->g_wBlockTableOffset;
+			g_wBlockTableIndex =
+				p_BTableChangesDelta->g_wBlockTableIndex;
+		} else if (p_BTableChangesDelta->ValidFields == 0x30) {
+			g_pWearCounterCopy[p_BTableChangesDelta->WC_Index] =
+				p_BTableChangesDelta->WC_Entry_Value;
+		} else if ((DeviceInfo.MLCDevice) &&
+			(p_BTableChangesDelta->ValidFields == 0xC0)) {
+			g_pReadCounterCopy[p_BTableChangesDelta->RC_Index] =
+				p_BTableChangesDelta->RC_Entry_Value;
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"In event status setting read counter "
+				"GLOB_ftl_cmd_cnt %u Count %u Index %u\n",
+				ftl_cmd,
+				p_BTableChangesDelta->RC_Entry_Value,
+				(unsigned int)p_BTableChangesDelta->RC_Index);
+		} else {
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"This should never occur \n");
+		}
+		p_BTableChangesDelta += 1;
+		ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+	}
+}
+
+static void discard_cmds(u16 n)
+{
+	u32 *pbt = (u32 *)g_pBTStartingCopy;
+	u8 ftl_cmd;
+	unsigned long k;
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	u8 cache_blks;
+	u16 id;
+#endif
+
+	if ((PendingCMD[n].CMD == WRITE_MAIN_CMD) ||
+		(PendingCMD[n].CMD == WRITE_MAIN_SPARE_CMD)) {
+		for (k = 0; k < DeviceInfo.wDataBlockNum; k++) {
+			if (PendingCMD[n].Block == (pbt[k] & (~BAD_BLOCK)))
+				MARK_BLK_AS_DISCARD(pbt[k]);
+		}
+	}
+
+	ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+	while (ftl_cmd <= PendingCMD[n].Tag) {
+		p_BTableChangesDelta += 1;
+		ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+	}
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	id = n - MAX_CHANS;
+
+	if (int_cache[id].item != -1) {
+		cache_blks = int_cache[id].item;
+		if (PendingCMD[n].CMD == MEMCOPY_CMD) {
+			if ((cache_start_copy.array[cache_blks].buf <=
+				PendingCMD[n].DataDestAddr) &&
+				((cache_start_copy.array[cache_blks].buf +
+				Cache.cache_item_size) >
+				PendingCMD[n].DataDestAddr)) {
+				cache_start_copy.array[cache_blks].address =
+						NAND_CACHE_INIT_ADDR;
+				cache_start_copy.array[cache_blks].use_cnt =
+								0;
+				cache_start_copy.array[cache_blks].changed =
+								CLEAR;
+			}
+		} else {
+			cache_start_copy.array[cache_blks].address =
+					int_cache[id].cache.address;
+			cache_start_copy.array[cache_blks].changed =
+					int_cache[id].cache.changed;
+		}
+	}
+#endif
+}
+
+static void process_cmd_pass(int *first_failed_cmd, u16 idx)
+{
+	if (0 == *first_failed_cmd)
+		save_blk_table_changes(idx);
+	else
+		discard_cmds(idx);
+}
+
+static void process_cmd_fail_abort(int *first_failed_cmd,
+				u16 idx, int event)
+{
+	u32 *pbt = (u32 *)g_pBTStartingCopy;
+	u8 ftl_cmd;
+	unsigned long i;
+	int erase_fail, program_fail;
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	u8 cache_blks;
+	u16 id;
+#endif
+
+	if (0 == *first_failed_cmd)
+		*first_failed_cmd = PendingCMD[idx].SBDCmdIndex;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Uncorrectable error has occured "
+		"while executing %u Command %u accesing Block %u\n",
+		(unsigned int)p_BTableChangesDelta->ftl_cmd_cnt,
+		PendingCMD[idx].CMD,
+		(unsigned int)PendingCMD[idx].Block);
+
+	ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+	while (ftl_cmd <= PendingCMD[idx].Tag) {
+		p_BTableChangesDelta += 1;
+		ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+	}
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	id = idx - MAX_CHANS;
+
+	if (int_cache[id].item != -1) {
+		cache_blks = int_cache[id].item;
+		if ((PendingCMD[idx].CMD == WRITE_MAIN_CMD)) {
+			cache_start_copy.array[cache_blks].address =
+					int_cache[id].cache.address;
+			cache_start_copy.array[cache_blks].changed = SET;
+		} else if ((PendingCMD[idx].CMD == READ_MAIN_CMD)) {
+			cache_start_copy.array[cache_blks].address =
+				NAND_CACHE_INIT_ADDR;
+			cache_start_copy.array[cache_blks].use_cnt = 0;
+			cache_start_copy.array[cache_blks].changed =
+							CLEAR;
+		} else if (PendingCMD[idx].CMD == ERASE_CMD) {
+			/* ? */
+		} else if (PendingCMD[idx].CMD == MEMCOPY_CMD) {
+			/* ? */
+		}
+	}
+#endif
+
+	erase_fail = (event == EVENT_ERASE_FAILURE) &&
+			(PendingCMD[idx].CMD == ERASE_CMD);
+
+	program_fail = (event == EVENT_PROGRAM_FAILURE) &&
+			((PendingCMD[idx].CMD == WRITE_MAIN_CMD) ||
+			(PendingCMD[idx].CMD == WRITE_MAIN_SPARE_CMD));
+
+	if (erase_fail || program_fail) {
+		for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+			if (PendingCMD[idx].Block ==
+				(pbt[i] & (~BAD_BLOCK)))
+				MARK_BLOCK_AS_BAD(pbt[i]);
+		}
+	}
+}
+
+static void process_cmd(int *first_failed_cmd, u16 idx, int event)
+{
+	u8 ftl_cmd;
+	int cmd_match = 0;
+
+	if (p_BTableChangesDelta->ftl_cmd_cnt == PendingCMD[idx].Tag)
+		cmd_match = 1;
+
+	if (PendingCMD[idx].Status == CMD_PASS) {
+		process_cmd_pass(first_failed_cmd, idx);
+	} else if ((PendingCMD[idx].Status == CMD_FAIL) ||
+			(PendingCMD[idx].Status == CMD_ABORT)) {
+		process_cmd_fail_abort(first_failed_cmd, idx, event);
+	} else if ((PendingCMD[idx].Status == CMD_NOT_DONE) &&
+					PendingCMD[idx].Tag) {
+		nand_dbg_print(NAND_DBG_DEBUG,
+			" Command no. %hu is not executed\n",
+			(unsigned int)PendingCMD[idx].Tag);
+		ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+		while (ftl_cmd <= PendingCMD[idx].Tag) {
+			p_BTableChangesDelta += 1;
+			ftl_cmd = p_BTableChangesDelta->ftl_cmd_cnt;
+		}
+	}
+}
+#endif
+
+static void process_cmd(int *first_failed_cmd, u16 idx, int event)
+{
+	printk(KERN_ERR "temporary workaround function. "
+		"Should not be called! \n");
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:    	GLOB_FTL_Event_Status
+* Inputs:       none
+* Outputs:      Event Code
+* Description:	It is called by SBD after hardware interrupt signalling
+*               completion of commands chain
+*               It does following things
+*               get event status from LLD
+*               analyze command chain status
+*               determine last command executed
+*               analyze results
+*               rebuild the block table in case of uncorrectable error
+*               return event code
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Event_Status(int *first_failed_cmd)
+{
+	int event_code = PASS;
+	u16 i_P;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	*first_failed_cmd = 0;
+
+	event_code = GLOB_LLD_Event_Status();
+
+	switch (event_code) {
+	case EVENT_PASS:
+		nand_dbg_print(NAND_DBG_DEBUG, "Handling EVENT_PASS\n");
+		break;
+	case EVENT_UNCORRECTABLE_DATA_ERROR:
+		nand_dbg_print(NAND_DBG_DEBUG, "Handling Uncorrectable ECC!\n");
+		break;
+	case EVENT_PROGRAM_FAILURE:
+	case EVENT_ERASE_FAILURE:
+		nand_dbg_print(NAND_DBG_WARN, "Handling Ugly case. "
+			"Event code: 0x%x\n", event_code);
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta;
+		for (i_P = MAX_CHANS; i_P < (ftl_cmd_cnt + MAX_CHANS);
+				i_P++)
+			process_cmd(first_failed_cmd, i_P, event_code);
+		memcpy(g_pBlockTable, g_pBTStartingCopy,
+			DeviceInfo.wDataBlockNum * sizeof(u32));
+		memcpy(g_pWearCounter, g_pWearCounterCopy,
+			DeviceInfo.wDataBlockNum * sizeof(u8));
+		if (DeviceInfo.MLCDevice)
+			memcpy(g_pReadCounter, g_pReadCounterCopy,
+				DeviceInfo.wDataBlockNum * sizeof(u16));
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+		memcpy((void *)&Cache, (void *)&cache_start_copy,
+			sizeof(struct flash_cache_tag));
+		memset((void *)&int_cache, -1,
+			sizeof(struct flash_cache_delta_list_tag) *
+			(MAX_DESCS + MAX_CHANS));
+#endif
+		break;
+	default:
+		nand_dbg_print(NAND_DBG_WARN,
+			"Handling unexpected event code - 0x%x\n",
+			event_code);
+		event_code = ERR;
+		break;
+	}
+
+	memcpy(g_pBTStartingCopy, g_pBlockTable,
+		DeviceInfo.wDataBlockNum * sizeof(u32));
+	memcpy(g_pWearCounterCopy, g_pWearCounter,
+		DeviceInfo.wDataBlockNum * sizeof(u8));
+	if (DeviceInfo.MLCDevice)
+		memcpy(g_pReadCounterCopy, g_pReadCounter,
+			DeviceInfo.wDataBlockNum * sizeof(u16));
+
+	g_pBTDelta_Free = g_pBTDelta;
+	ftl_cmd_cnt = 0;
+	g_pNextBlockTable = g_pBlockTableCopies;
+	cp_back_buf_idx = 0;
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	memcpy((void *)&cache_start_copy, (void *)&Cache,
+		sizeof(struct flash_cache_tag));
+	memset((void *)&int_cache, -1,
+		sizeof(struct flash_cache_delta_list_tag) *
+		(MAX_DESCS + MAX_CHANS));
+#endif
+
+	return event_code;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     glob_ftl_execute_cmds
+* Inputs:       none
+* Outputs:      none
+* Description:  pass thru to LLD
+***************************************************************/
+u16 glob_ftl_execute_cmds(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE,
+		"glob_ftl_execute_cmds: ftl_cmd_cnt %u\n",
+		(unsigned int)ftl_cmd_cnt);
+	g_SBDCmdIndex = 0;
+	return glob_lld_execute_cmds();
+}
+
+#endif
+
+#if !CMD_DMA
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Read Immediate
+* Inputs:         pointer to data
+*                     address of data
+* Outputs:      PASS / FAIL
+* Description:  Reads one page of data into RAM directly from flash without
+*       using or disturbing cache.It is assumed this function is called
+*       with CMD-DMA disabled.
+*****************************************************************/
+int GLOB_FTL_Read_Immediate(u8 *read_data, u64 addr)
+{
+	int wResult = FAIL;
+	u32 Block;
+	u16 Page;
+	u32 phy_blk;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	Block = BLK_FROM_ADDR(addr);
+	Page = PAGE_FROM_ADDR(addr, Block);
+
+	if (!IS_SPARE_BLOCK(Block))
+		return FAIL;
+
+	phy_blk = pbt[Block];
+	wResult = GLOB_LLD_Read_Page_Main(read_data, phy_blk, Page, 1);
+
+	if (DeviceInfo.MLCDevice) {
+		g_pReadCounter[phy_blk - DeviceInfo.wSpectraStartBlock]++;
+		if (g_pReadCounter[phy_blk - DeviceInfo.wSpectraStartBlock]
+			>= MAX_READ_COUNTER)
+			FTL_Read_Disturbance(phy_blk);
+		if (g_cBlockTableStatus != IN_PROGRESS_BLOCK_TABLE) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+	}
+
+	return wResult;
+}
+#endif
+
+#ifdef SUPPORT_BIG_ENDIAN
+/*********************************************************************
+* Function:     FTL_Invert_Block_Table
+* Inputs:       none
+* Outputs:      none
+* Description:  Re-format the block table in ram based on BIG_ENDIAN and
+*                     LARGE_BLOCKNUM if necessary
+**********************************************************************/
+static void FTL_Invert_Block_Table(void)
+{
+	u32 i;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+#ifdef SUPPORT_LARGE_BLOCKNUM
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		pbt[i] = INVERTUINT32(pbt[i]);
+		g_pWearCounter[i] = INVERTUINT32(g_pWearCounter[i]);
+	}
+#else
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		pbt[i] = INVERTUINT16(pbt[i]);
+		g_pWearCounter[i] = INVERTUINT16(g_pWearCounter[i]);
+	}
+#endif
+}
+#endif
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Flash_Init
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=0x01 (based on read ID)
+* Description:  The flash controller is initialized
+*               The flash device is reset
+*               Perform a flash READ ID command to confirm that a
+*                   valid device is attached and active.
+*                   The DeviceInfo structure gets filled in
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Flash_Init(void)
+{
+	int status = FAIL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	g_SBDCmdIndex = 0;
+
+	GLOB_LLD_Flash_Init();
+
+	status = GLOB_LLD_Read_Device_ID();
+
+	return status;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=0x01 (based on read ID)
+* Description:  The flash controller is released
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Flash_Release(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	return GLOB_LLD_Flash_Release();
+}
+
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Cache_Release
+* Inputs:       none
+* Outputs:      none
+* Description:  release all allocated memory in GLOB_FTL_Init
+*               (allocated in GLOB_FTL_Init)
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+void GLOB_FTL_Cache_Release(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	free_memory();
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_If_Hit
+* Inputs:       Page Address
+* Outputs:      Block number/UNHIT BLOCK
+* Description:  Determines if the addressed page is in cache
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u16 FTL_Cache_If_Hit(u64 page_addr)
+{
+	u16 item;
+	u64 addr;
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	item = UNHIT_CACHE_ITEM;
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		addr = Cache.array[i].address;
+		if ((page_addr >= addr) &&
+			(page_addr < (addr + Cache.cache_item_size))) {
+			item = i;
+			break;
+		}
+	}
+
+	return item;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Calculate_LRU
+* Inputs:       None
+* Outputs:      None
+* Description:  Calculate the least recently block in a cache and record its
+*               index in LRU field.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static void FTL_Calculate_LRU(void)
+{
+	u16 i, bCurrentLRU, bTempCount;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	bCurrentLRU = 0;
+	bTempCount = MAX_WORD_VALUE;
+
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		if (Cache.array[i].use_cnt < bTempCount) {
+			bCurrentLRU = i;
+			bTempCount = Cache.array[i].use_cnt;
+		}
+	}
+
+	Cache.LRU = bCurrentLRU;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Read_Page
+* Inputs:       pointer to read buffer, logical address and cache item number
+* Outputs:      None
+* Description:  Read the page from the cached block addressed by blocknumber
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static void FTL_Cache_Read_Page(u8 *data_buf, u64 logic_addr, u16 cache_item)
+{
+	u8 *start_addr;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	start_addr = Cache.array[cache_item].buf;
+	start_addr += (u32)(((logic_addr - Cache.array[cache_item].address) >>
+		DeviceInfo.nBitsInPageDataSize) * DeviceInfo.wPageDataSize);
+
+#if CMD_DMA
+	GLOB_LLD_MemCopy_CMD(data_buf, start_addr,
+			DeviceInfo.wPageDataSize, 0);
+	ftl_cmd_cnt++;
+#else
+	memcpy(data_buf, start_addr, DeviceInfo.wPageDataSize);
+#endif
+
+	if (Cache.array[cache_item].use_cnt < MAX_WORD_VALUE)
+		Cache.array[cache_item].use_cnt++;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Read_All
+* Inputs:       pointer to read buffer,block address
+* Outputs:      PASS=0 / FAIL =1
+* Description:  It reads pages in cache
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Read_All(u8 *pData, u64 phy_addr)
+{
+	int wResult = PASS;
+	u32 Block;
+	u32 lba;
+	u16 Page;
+	u16 PageCount;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 i;
+
+	Block = BLK_FROM_ADDR(phy_addr);
+	Page = PAGE_FROM_ADDR(phy_addr, Block);
+	PageCount = Cache.pages_per_item;
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+			"%s, Line %d, Function: %s, Block: 0x%x\n",
+			__FILE__, __LINE__, __func__, Block);
+
+	lba = 0xffffffff;
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if ((pbt[i] & (~BAD_BLOCK)) == Block) {
+			lba = i;
+			if (IS_SPARE_BLOCK(i) || IS_BAD_BLOCK(i) ||
+				IS_DISCARDED_BLOCK(i)) {
+				/* Add by yunpeng -2008.12.3 */
+#if CMD_DMA
+				GLOB_LLD_MemCopy_CMD(pData, g_temp_buf,
+				PageCount * DeviceInfo.wPageDataSize, 0);
+				ftl_cmd_cnt++;
+#else
+				memset(pData, 0xFF,
+					PageCount * DeviceInfo.wPageDataSize);
+#endif
+				return wResult;
+			} else {
+				continue; /* break ?? */
+			}
+		}
+	}
+
+	if (0xffffffff == lba)
+		printk(KERN_ERR "FTL_Cache_Read_All: Block is not found in BT\n");
+
+#if CMD_DMA
+	wResult = GLOB_LLD_Read_Page_Main_cdma(pData, Block, Page,
+			PageCount, LLD_CMD_FLAG_MODE_CDMA);
+	if (DeviceInfo.MLCDevice) {
+		g_pReadCounter[Block - DeviceInfo.wSpectraStartBlock]++;
+		nand_dbg_print(NAND_DBG_DEBUG,
+			       "Read Counter modified in ftl_cmd_cnt %u"
+				" Block %u Counter%u\n",
+			       ftl_cmd_cnt, (unsigned int)Block,
+			       g_pReadCounter[Block -
+			       DeviceInfo.wSpectraStartBlock]);
+
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+		p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+		p_BTableChangesDelta->RC_Index =
+			Block - DeviceInfo.wSpectraStartBlock;
+		p_BTableChangesDelta->RC_Entry_Value =
+			g_pReadCounter[Block - DeviceInfo.wSpectraStartBlock];
+		p_BTableChangesDelta->ValidFields = 0xC0;
+
+		ftl_cmd_cnt++;
+
+		if (g_pReadCounter[Block - DeviceInfo.wSpectraStartBlock] >=
+		    MAX_READ_COUNTER)
+			FTL_Read_Disturbance(Block);
+		if (g_cBlockTableStatus != IN_PROGRESS_BLOCK_TABLE) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+	} else {
+		ftl_cmd_cnt++;
+	}
+#else
+	wResult = GLOB_LLD_Read_Page_Main(pData, Block, Page, PageCount);
+	if (wResult == FAIL)
+		return wResult;
+
+	if (DeviceInfo.MLCDevice) {
+		g_pReadCounter[Block - DeviceInfo.wSpectraStartBlock]++;
+		if (g_pReadCounter[Block - DeviceInfo.wSpectraStartBlock] >=
+						MAX_READ_COUNTER)
+			FTL_Read_Disturbance(Block);
+		if (g_cBlockTableStatus != IN_PROGRESS_BLOCK_TABLE) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+	}
+#endif
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Write_All
+* Inputs:       pointer to cache in sys memory
+*               address of free block in flash
+* Outputs:      PASS=0 / FAIL=1
+* Description:  writes all the pages of the block in cache to flash
+*
+*               NOTE:need to make sure this works ok when cache is limited
+*               to a partial block. This is where copy-back would be
+*               activated.  This would require knowing which pages in the
+*               cached block are clean/dirty.Right now we only know if
+*               the whole block is clean/dirty.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Write_All(u8 *pData, u64 blk_addr)
+{
+	u16 wResult = PASS;
+	u32 Block;
+	u16 Page;
+	u16 PageCount;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	nand_dbg_print(NAND_DBG_DEBUG, "This block %d going to be written "
+		"on %d\n", cache_block_to_write,
+		(u32)(blk_addr >> DeviceInfo.nBitsInBlockDataSize));
+
+	Block = BLK_FROM_ADDR(blk_addr);
+	Page = PAGE_FROM_ADDR(blk_addr, Block);
+	PageCount = Cache.pages_per_item;
+
+#if CMD_DMA
+	if (FAIL == GLOB_LLD_Write_Page_Main_cdma(pData,
+					Block, Page, PageCount)) {
+		nand_dbg_print(NAND_DBG_WARN,
+			"NAND Program fail in %s, Line %d, "
+			"Function: %s, new Bad Block %d generated! "
+			"Need Bad Block replacing.\n",
+			__FILE__, __LINE__, __func__, Block);
+		wResult = FAIL;
+	}
+	ftl_cmd_cnt++;
+#else
+	if (FAIL == GLOB_LLD_Write_Page_Main(pData, Block, Page, PageCount)) {
+		nand_dbg_print(NAND_DBG_WARN, "NAND Program fail in %s,"
+			" Line %d, Function %s, new Bad Block %d generated!"
+			"Need Bad Block replacing.\n",
+			__FILE__, __LINE__, __func__, Block);
+		wResult = FAIL;
+	}
+#endif
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Update_Block
+* Inputs:       pointer to buffer,page address,block address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It updates the cache
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Update_Block(u8 *pData,
+			u64 old_page_addr, u64 blk_addr)
+{
+	int i, j;
+	u8 *buf = pData;
+	int wResult = PASS;
+	int wFoundInCache;
+	u64 page_addr;
+	u64 addr;
+	u64 old_blk_addr;
+	u16 page_offset;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+				__FILE__, __LINE__, __func__);
+
+	old_blk_addr = (u64)(old_page_addr >>
+		DeviceInfo.nBitsInBlockDataSize) * DeviceInfo.wBlockDataSize;
+	page_offset = (u16)(GLOB_u64_Remainder(old_page_addr, 2) >>
+		DeviceInfo.nBitsInPageDataSize);
+
+	for (i = 0; i < DeviceInfo.wPagesPerBlock; i += Cache.pages_per_item) {
+		page_addr = old_blk_addr + i * DeviceInfo.wPageDataSize;
+		if (i != page_offset) {
+			wFoundInCache = FAIL;
+			for (j = 0; j < CACHE_ITEM_NUM; j++) {
+				addr = Cache.array[j].address;
+				addr = FTL_Get_Physical_Block_Addr(addr) +
+					GLOB_u64_Remainder(addr, 2);
+				if ((addr >= page_addr) && addr <
+					(page_addr + Cache.cache_item_size)) {
+					wFoundInCache = PASS;
+					buf = Cache.array[j].buf;
+					Cache.array[j].changed = SET;
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+					int_cache[ftl_cmd_cnt].item = j;
+					int_cache[ftl_cmd_cnt].cache.address =
+						Cache.array[j].address;
+					int_cache[ftl_cmd_cnt].cache.changed =
+						Cache.array[j].changed;
+#endif
+#endif
+					break;
+				}
+			}
+			if (FAIL == wFoundInCache) {
+				if (ERR == FTL_Cache_Read_All(g_pTempBuf,
+					page_addr)) {
+					wResult = FAIL;
+					break;
+				}
+				buf = g_pTempBuf;
+			}
+		} else {
+			buf = pData;
+		}
+
+		if (FAIL == FTL_Cache_Write_All(buf,
+			blk_addr + (page_addr - old_blk_addr))) {
+			wResult = FAIL;
+			break;
+		}
+	}
+
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Copy_Block
+* Inputs:       source block address
+*               Destination block address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  used only for static wear leveling to move the block
+*               containing static data to new blocks(more worn)
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int FTL_Copy_Block(u64 old_blk_addr, u64 blk_addr)
+{
+	int i, r1, r2, wResult = PASS;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	for (i = 0; i < DeviceInfo.wPagesPerBlock; i += Cache.pages_per_item) {
+		r1 = FTL_Cache_Read_All(g_pTempBuf, old_blk_addr +
+					i * DeviceInfo.wPageDataSize);
+		r2 = FTL_Cache_Write_All(g_pTempBuf, blk_addr +
+					i * DeviceInfo.wPageDataSize);
+		if ((ERR == r1) || (FAIL == r2)) {
+			wResult = FAIL;
+			break;
+		}
+	}
+
+	return wResult;
+}
+
+/* Search the block table to find out the least wear block and then return it */
+static u32 find_least_worn_blk_for_l2_cache(void)
+{
+	int i;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u8 least_wear_cnt = MAX_BYTE_VALUE;
+	u32 least_wear_blk_idx = MAX_U32_VALUE;
+	u32 phy_idx;
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_SPARE_BLOCK(i)) {
+			phy_idx = (u32)((~BAD_BLOCK) & pbt[i]);
+			if (phy_idx > DeviceInfo.wSpectraEndBlock)
+				printk(KERN_ERR "find_least_worn_blk_for_l2_cache: "
+					"Too big phy block num (%d)\n", phy_idx);
+			if (g_pWearCounter[phy_idx -DeviceInfo.wSpectraStartBlock] < least_wear_cnt) {
+				least_wear_cnt = g_pWearCounter[phy_idx - DeviceInfo.wSpectraStartBlock];
+				least_wear_blk_idx = i;
+			}
+		}
+	}
+
+	nand_dbg_print(NAND_DBG_WARN,
+		"find_least_worn_blk_for_l2_cache: "
+		"find block %d with least worn counter (%d)\n",
+		least_wear_blk_idx, least_wear_cnt);
+
+	return least_wear_blk_idx;
+}
+
+
+
+/* Get blocks for Level2 Cache */
+static int get_l2_cache_blks(void)
+{
+	int n;
+	u32 blk;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	for (n = 0; n < BLK_NUM_FOR_L2_CACHE; n++) {
+		blk = find_least_worn_blk_for_l2_cache();
+		if (blk > DeviceInfo.wDataBlockNum) {
+			nand_dbg_print(NAND_DBG_WARN,
+				"find_least_worn_blk_for_l2_cache: "
+				"No enough free NAND blocks (n: %d) for L2 Cache!\n", n);
+			return FAIL;
+		}
+		/* Tag the free block as discard in block table */
+		pbt[blk] = (pbt[blk] & (~BAD_BLOCK)) | DISCARD_BLOCK;
+		/* Add the free block to the L2 Cache block array */
+		cache_l2.blk_array[n] = pbt[blk] & (~BAD_BLOCK);
+	}
+
+	return PASS;
+}
+
+static int erase_l2_cache_blocks(void)
+{
+	int i, ret = PASS;
+	u32 pblk, lblk;
+	u64 addr;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < BLK_NUM_FOR_L2_CACHE; i++) {
+		pblk = cache_l2.blk_array[i];
+
+		/* If the L2 cache block is invalid, then just skip it */
+		if (MAX_U32_VALUE == pblk)
+			continue;
+
+		BUG_ON(pblk > DeviceInfo.wSpectraEndBlock);
+
+		addr = (u64)pblk << DeviceInfo.nBitsInBlockDataSize;
+		if (PASS == GLOB_FTL_Block_Erase(addr)) {
+			/* Get logical block number of the erased block */
+			lblk = FTL_Get_Block_Index(pblk);
+			BUG_ON(BAD_BLOCK == lblk);
+			/* Tag it as free in the block table */
+			pbt[lblk] &= (u32)(~DISCARD_BLOCK);
+			pbt[lblk] |= (u32)(SPARE_BLOCK);
+		} else {
+			MARK_BLOCK_AS_BAD(pbt[lblk]);
+			ret = ERR;
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * Merge the valid data page in the L2 cache blocks into NAND.
+*/
+static int flush_l2_cache(void)
+{
+	struct list_head *p;
+	struct spectra_l2_cache_list *pnd, *tmp_pnd;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 phy_blk, l2_blk;
+	u64 addr;
+	u16 l2_page;
+	int i, ret = PASS;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	if (list_empty(&cache_l2.table.list)) /* No data to flush */
+		return ret;
+
+	//dump_cache_l2_table();
+
+	if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+		g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+		FTL_Write_IN_Progress_Block_Table_Page();
+	}
+
+	list_for_each(p, &cache_l2.table.list) {
+		pnd = list_entry(p, struct spectra_l2_cache_list, list);
+		if (IS_SPARE_BLOCK(pnd->logical_blk_num) ||
+			IS_BAD_BLOCK(pnd->logical_blk_num) ||
+			IS_DISCARDED_BLOCK(pnd->logical_blk_num)) {
+			nand_dbg_print(NAND_DBG_WARN, "%s, Line %d\n", __FILE__, __LINE__);
+			memset(cache_l2_blk_buf, 0xff, DeviceInfo.wPagesPerBlock * DeviceInfo.wPageDataSize);			
+		} else {
+			nand_dbg_print(NAND_DBG_WARN, "%s, Line %d\n", __FILE__, __LINE__);
+			phy_blk = pbt[pnd->logical_blk_num] & (~BAD_BLOCK);
+			ret = GLOB_LLD_Read_Page_Main(cache_l2_blk_buf,
+				phy_blk, 0, DeviceInfo.wPagesPerBlock);
+			if (ret == FAIL) {
+				printk(KERN_ERR "Read NAND page fail in %s, Line %d\n", __FILE__, __LINE__);
+			}
+		}
+
+		for (i = 0; i < DeviceInfo.wPagesPerBlock; i++) {
+			if (pnd->pages_array[i] != MAX_U32_VALUE) {
+				l2_blk = cache_l2.blk_array[(pnd->pages_array[i] >> 16) & 0xffff];
+				l2_page = pnd->pages_array[i] & 0xffff;
+				ret = GLOB_LLD_Read_Page_Main(cache_l2_page_buf, l2_blk, l2_page, 1);
+				if (ret == FAIL) {
+					printk(KERN_ERR "Read NAND page fail in %s, Line %d\n", __FILE__, __LINE__);
+				}
+				memcpy(cache_l2_blk_buf + i * DeviceInfo.wPageDataSize, cache_l2_page_buf, DeviceInfo.wPageDataSize);
+			}
+		}
+
+		/* Find a free block and tag the original block as discarded */
+		addr = (u64)pnd->logical_blk_num << DeviceInfo.nBitsInBlockDataSize;
+		ret = FTL_Replace_Block(addr);
+		if (ret == FAIL) {
+			printk(KERN_ERR "FTL_Replace_Block fail in %s, Line %d\n", __FILE__, __LINE__);
+		}
+
+		/* Write back the updated data into NAND */
+		phy_blk = pbt[pnd->logical_blk_num] & (~BAD_BLOCK);
+		if (FAIL == GLOB_LLD_Write_Page_Main(cache_l2_blk_buf, phy_blk, 0, DeviceInfo.wPagesPerBlock)) {
+			nand_dbg_print(NAND_DBG_WARN,
+				"Program NAND block %d fail in %s, Line %d\n",
+				phy_blk, __FILE__, __LINE__);
+			/* This may not be really a bad block. So just tag it as discarded. */
+			/* Then it has a chance to be erased when garbage collection. */
+			/* If it is really bad, then the erase will fail and it will be marked */
+			/* as bad then. Otherwise it will be marked as free and can be used again */
+			MARK_BLK_AS_DISCARD(pbt[pnd->logical_blk_num]);
+			/* Find another free block and write it again */
+			FTL_Replace_Block(addr);
+			phy_blk = pbt[pnd->logical_blk_num] & (~BAD_BLOCK);
+			if (FAIL == GLOB_LLD_Write_Page_Main(cache_l2_blk_buf, phy_blk, 0, DeviceInfo.wPagesPerBlock)) {
+				printk(KERN_ERR "Failed to write back block %d when flush L2 cache."
+					"Some data will be lost!\n", phy_blk);
+				MARK_BLOCK_AS_BAD(pbt[pnd->logical_blk_num]);
+			}
+		} else {
+			/* tag the new free block as used block */
+			pbt[pnd->logical_blk_num] &= (~SPARE_BLOCK);
+		}
+	}
+
+	/* Destroy the L2 Cache table and free the memory of all nodes */
+	list_for_each_entry_safe(pnd, tmp_pnd, &cache_l2.table.list, list) {
+		list_del(&pnd->list);
+		kfree(pnd);
+	}
+
+	/* Erase discard L2 cache blocks */
+	if (erase_l2_cache_blocks() != PASS)
+		nand_dbg_print(NAND_DBG_WARN,
+			" Erase L2 cache blocks error in %s, Line %d\n",
+			__FILE__, __LINE__);
+
+	/* Init the Level2 Cache data structure */
+	for (i = 0; i < BLK_NUM_FOR_L2_CACHE; i++)
+		cache_l2.blk_array[i] = MAX_U32_VALUE;
+	cache_l2.cur_blk_idx = 0;
+	cache_l2.cur_page_num = 0;
+	INIT_LIST_HEAD(&cache_l2.table.list);
+	cache_l2.table.logical_blk_num = MAX_U32_VALUE;
+
+	return ret;
+}
+
+/*
+ * Write back a changed victim cache item to the Level2 Cache
+ * and update the L2 Cache table to map the change.
+ * If the L2 Cache is full, then start to do the L2 Cache flush.
+*/
+static int write_back_to_l2_cache(u8 *buf, u64 logical_addr)
+{
+	u32 logical_blk_num;
+	u16 logical_page_num;
+	struct list_head *p;
+	struct spectra_l2_cache_list *pnd, *pnd_new;
+	u32 node_size;
+	int i, found;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	/*
+	 * If Level2 Cache table is empty, then it means either:
+	 * 1. This is the first time that the function called after FTL_init
+	 * or
+	 * 2. The Level2 Cache has just been flushed
+	 *
+	 * So, 'steal' some free blocks from NAND for L2 Cache using
+	 * by just mask them as discard in the block table
+	*/
+	if (list_empty(&cache_l2.table.list)) {
+		BUG_ON(cache_l2.cur_blk_idx != 0);
+		BUG_ON(cache_l2.cur_page_num!= 0);
+		BUG_ON(cache_l2.table.logical_blk_num != MAX_U32_VALUE);
+		if (FAIL == get_l2_cache_blks()) {
+			GLOB_FTL_Garbage_Collection();
+			if (FAIL == get_l2_cache_blks()) {
+				printk(KERN_ALERT "Fail to get L2 cache blks!\n");
+				return FAIL;
+			}
+		}
+	}
+
+	logical_blk_num = BLK_FROM_ADDR(logical_addr);
+	logical_page_num = PAGE_FROM_ADDR(logical_addr, logical_blk_num);
+	BUG_ON(logical_blk_num == MAX_U32_VALUE);
+
+	/* Write the cache item data into the current position of L2 Cache */
+#if CMD_DMA
+	/*
+	 * TODO
+	 */
+#else
+	if (FAIL == GLOB_LLD_Write_Page_Main(buf,
+		cache_l2.blk_array[cache_l2.cur_blk_idx],
+		cache_l2.cur_page_num, 1)) {
+		nand_dbg_print(NAND_DBG_WARN, "NAND Program fail in "
+			"%s, Line %d, new Bad Block %d generated!\n",
+			__FILE__, __LINE__,
+			cache_l2.blk_array[cache_l2.cur_blk_idx]);
+
+		/* TODO: tag the current block as bad and try again */
+
+		return FAIL;
+	}
+#endif
+
+	/* 
+	 * Update the L2 Cache table.
+	 *
+	 * First seaching in the table to see whether the logical block
+	 * has been mapped. If not, then kmalloc a new node for the
+	 * logical block, fill data, and then insert it to the list.
+	 * Otherwise, just update the mapped node directly.
+	 */
+	found = 0;
+	list_for_each(p, &cache_l2.table.list) {
+		pnd = list_entry(p, struct spectra_l2_cache_list, list);
+		if (pnd->logical_blk_num == logical_blk_num) {
+			pnd->pages_array[logical_page_num] =
+				(cache_l2.cur_blk_idx << 16) |
+				cache_l2.cur_page_num;
+			found = 1;
+			break;
+		}
+	}
+	if (!found) { /* Create new node for the logical block here */
+
+		/* The logical pages to physical pages map array is
+		 * located at the end of struct spectra_l2_cache_list.
+		 */ 
+		node_size = sizeof(struct spectra_l2_cache_list) +
+			sizeof(u32) * DeviceInfo.wPagesPerBlock;
+		pnd_new = kmalloc(node_size, GFP_ATOMIC);
+		if (!pnd_new) {
+			printk(KERN_ERR "Failed to kmalloc in %s Line %d\n",
+				__FILE__, __LINE__);
+			/* 
+			 * TODO: Need to flush all the L2 cache into NAND ASAP
+			 * since no memory available here
+			 */
+		}
+		pnd_new->logical_blk_num = logical_blk_num;
+		for (i = 0; i < DeviceInfo.wPagesPerBlock; i++)
+			pnd_new->pages_array[i] = MAX_U32_VALUE;
+		pnd_new->pages_array[logical_page_num] =
+			(cache_l2.cur_blk_idx << 16) | cache_l2.cur_page_num;
+		list_add(&pnd_new->list, &cache_l2.table.list);
+	}
+
+	/* Increasing the current position pointer of the L2 Cache */
+	cache_l2.cur_page_num++;
+	if (cache_l2.cur_page_num >= DeviceInfo.wPagesPerBlock) {
+		cache_l2.cur_blk_idx++;
+		if (cache_l2.cur_blk_idx >= BLK_NUM_FOR_L2_CACHE) {
+			/* The L2 Cache is full. Need to flush it now */
+			nand_dbg_print(NAND_DBG_WARN,
+				"L2 Cache is full, will start to flush it\n");
+			flush_l2_cache();
+		} else {
+			cache_l2.cur_page_num = 0;
+		}
+	}
+
+	return PASS;
+}
+
+/*
+ * Seach in the Level2 Cache table to find the cache item.
+ * If find, read the data from the NAND page of L2 Cache,
+ * Otherwise, return FAIL.
+ */
+static int search_l2_cache(u8 *buf, u64 logical_addr)
+{
+	u32 logical_blk_num;
+	u16 logical_page_num;
+	struct list_head *p;
+	struct spectra_l2_cache_list *pnd;
+	u32 tmp = MAX_U32_VALUE;
+	u32 phy_blk;
+	u16 phy_page;
+	int ret = FAIL;
+
+	logical_blk_num = BLK_FROM_ADDR(logical_addr);
+	logical_page_num = PAGE_FROM_ADDR(logical_addr, logical_blk_num);
+
+	list_for_each(p, &cache_l2.table.list) {
+		pnd = list_entry(p, struct spectra_l2_cache_list, list);
+		if (pnd->logical_blk_num == logical_blk_num) {
+			tmp = pnd->pages_array[logical_page_num];
+			break;
+		}
+	}
+
+	if (tmp != MAX_U32_VALUE) { /* Found valid map */
+		phy_blk = cache_l2.blk_array[(tmp >> 16) & 0xFFFF];
+		phy_page = tmp & 0xFFFF;
+#if CMD_DMA
+		/* TODO */
+#else
+		ret = GLOB_LLD_Read_Page_Main(buf, phy_blk, phy_page, 1);
+#endif
+	}
+
+	return ret;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Write_Back
+* Inputs:       pointer to data cached in sys memory
+*               address of free block in flash
+* Outputs:      PASS=0 / FAIL=1
+* Description:  writes all the pages of Cache Block to flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Write_Back(u8 *pData, u64 blk_addr)
+{
+	int i, j, iErase;
+	u64 old_page_addr, addr, phy_addr;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 lba;
+	
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	old_page_addr = FTL_Get_Physical_Block_Addr(blk_addr) +
+		GLOB_u64_Remainder(blk_addr, 2);
+
+	iErase = (FAIL == FTL_Replace_Block(blk_addr)) ? PASS : FAIL;
+
+	pbt[BLK_FROM_ADDR(blk_addr)] &= (~SPARE_BLOCK);
+
+#if CMD_DMA
+	p_BTableChangesDelta = (struct BTableChangesDelta *)g_pBTDelta_Free;
+	g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+	p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+	p_BTableChangesDelta->BT_Index = (u32)(blk_addr >>
+		DeviceInfo.nBitsInBlockDataSize);
+	p_BTableChangesDelta->BT_Entry_Value =
+		pbt[(u32)(blk_addr >> DeviceInfo.nBitsInBlockDataSize)];
+	p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+
+	if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+		g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+		FTL_Write_IN_Progress_Block_Table_Page();
+	}
+
+	for (i = 0; i < RETRY_TIMES; i++) {
+		if (PASS == iErase) {
+			phy_addr = FTL_Get_Physical_Block_Addr(blk_addr);
+			if (FAIL == GLOB_FTL_Block_Erase(phy_addr)) {
+				lba = BLK_FROM_ADDR(blk_addr);
+				MARK_BLOCK_AS_BAD(pbt[lba]);
+				i = RETRY_TIMES;
+				break;
+			}
+		}
+
+		for (j = 0; j < CACHE_ITEM_NUM; j++) {
+			addr = Cache.array[j].address;
+			if ((addr <= blk_addr) &&
+				((addr + Cache.cache_item_size) > blk_addr))
+				cache_block_to_write = j;
+		}
+
+		phy_addr = FTL_Get_Physical_Block_Addr(blk_addr);
+		if (PASS == FTL_Cache_Update_Block(pData,
+					old_page_addr, phy_addr)) {
+			cache_block_to_write = UNHIT_CACHE_ITEM;
+			break;
+		} else {
+			iErase = PASS;
+		}
+	}
+
+	if (i >= RETRY_TIMES) {
+		if (ERR == FTL_Flash_Error_Handle(pData,
+					old_page_addr, blk_addr))
+			return ERR;
+		else
+			return FAIL;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Write_Page
+* Inputs:       Pointer to buffer, page address, cache block number
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It writes the data in Cache Block
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static void FTL_Cache_Write_Page(u8 *pData, u64 page_addr,
+				u8 cache_blk, u16 flag)
+{
+	u8 *pDest;
+	u64 addr;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	addr = Cache.array[cache_blk].address;
+	pDest = Cache.array[cache_blk].buf;
+
+	pDest += (unsigned long)(page_addr - addr);
+	Cache.array[cache_blk].changed = SET;
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	int_cache[ftl_cmd_cnt].item = cache_blk;
+	int_cache[ftl_cmd_cnt].cache.address =
+			Cache.array[cache_blk].address;
+	int_cache[ftl_cmd_cnt].cache.changed =
+			Cache.array[cache_blk].changed;
+#endif
+	GLOB_LLD_MemCopy_CMD(pDest, pData, DeviceInfo.wPageDataSize, flag);
+	ftl_cmd_cnt++;
+#else
+	memcpy(pDest, pData, DeviceInfo.wPageDataSize);
+#endif
+	if (Cache.array[cache_blk].use_cnt < MAX_WORD_VALUE)
+		Cache.array[cache_blk].use_cnt++;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Write
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It writes least frequently used Cache block to flash if it
+*               has been changed
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Write(void)
+{
+	int i, bResult = PASS;
+	u16 bNO, least_count = 0xFFFF;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	FTL_Calculate_LRU();
+
+	bNO = Cache.LRU;
+	nand_dbg_print(NAND_DBG_DEBUG, "FTL_Cache_Write: "
+		"Least used cache block is %d\n", bNO);
+
+	if (Cache.array[bNO].changed != SET)
+		return bResult;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "FTL_Cache_Write: Cache"
+		" Block %d containing logical block %d is dirty\n",
+		bNO,
+		(u32)(Cache.array[bNO].address >>
+		DeviceInfo.nBitsInBlockDataSize));
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	int_cache[ftl_cmd_cnt].item = bNO;
+	int_cache[ftl_cmd_cnt].cache.address =
+				Cache.array[bNO].address;
+	int_cache[ftl_cmd_cnt].cache.changed = CLEAR;
+#endif
+#endif
+	bResult = write_back_to_l2_cache(Cache.array[bNO].buf,
+			Cache.array[bNO].address);
+	if (bResult != ERR)
+		Cache.array[bNO].changed = CLEAR;
+
+	least_count = Cache.array[bNO].use_cnt;
+
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		if (i == bNO)
+			continue;
+		if (Cache.array[i].use_cnt > 0)
+			Cache.array[i].use_cnt -= least_count;
+	}
+
+	return bResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Cache_Read
+* Inputs:       Page address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It reads the block from device in Cache Block
+*               Set the LRU count to 1
+*               Mark the Cache Block as clean
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Cache_Read(u64 logical_addr)
+{
+	u64 item_addr, phy_addr;
+	u16 num;
+	int ret;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	num = Cache.LRU; /* The LRU cache item will be overwritten */
+
+	item_addr = (u64)GLOB_u64_Div(logical_addr, Cache.cache_item_size) *
+		Cache.cache_item_size;
+	Cache.array[num].address = item_addr;
+	Cache.array[num].use_cnt = 1;
+	Cache.array[num].changed = CLEAR;
+
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+	int_cache[ftl_cmd_cnt].item = num;
+	int_cache[ftl_cmd_cnt].cache.address =
+			Cache.array[num].address;
+	int_cache[ftl_cmd_cnt].cache.changed =
+			Cache.array[num].changed;
+#endif
+#endif
+	/*
+	 * Search in L2 Cache. If hit, fill data into L1 Cache item buffer,
+	 * Otherwise, read it from NAND
+	 */
+	ret = search_l2_cache(Cache.array[num].buf, logical_addr);
+	if (PASS == ret) /* Hit in L2 Cache */
+		return ret;
+
+	/* Compute the physical start address of NAND device according to */
+	/* the logical start address of the cache item (LRU cache item) */
+	phy_addr = FTL_Get_Physical_Block_Addr(item_addr) +
+		GLOB_u64_Remainder(item_addr, 2);
+
+	return FTL_Cache_Read_All(Cache.array[num].buf, phy_addr);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Check_Block_Table
+* Inputs:       ?
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It checks the correctness of each block table entry
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Check_Block_Table(int wOldTable)
+{
+	u32 i;
+	int wResult = PASS;
+	u32 blk_idx;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u8 *pFlag = flag_check_blk_table;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (NULL != pFlag) {
+		memset(pFlag, FAIL, DeviceInfo.wDataBlockNum);
+		for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+			blk_idx = (u32)(pbt[i] & (~BAD_BLOCK));
+
+			/*
+			 * 20081006/KBV - Changed to pFlag[i] reference
+			 * to avoid buffer overflow
+			 */
+
+			/*
+			 * 2008-10-20 Yunpeng Note: This change avoid
+			 * buffer overflow, but changed function of
+			 * the code, so it should be re-write later
+			 */
+			if ((blk_idx > DeviceInfo.wSpectraEndBlock) ||
+				PASS == pFlag[i]) {
+				wResult = FAIL;
+				break;
+			} else {
+				pFlag[i] = PASS;
+			}
+		}
+	}
+
+	return wResult;
+}
+
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Write_Block_Table
+* Inputs:       flasg
+* Outputs:      0=Block Table was updated. No write done. 1=Block write needs to
+* happen. -1 Error
+* Description:  It writes the block table
+*               Block table always mapped to LBA 0 which inturn mapped
+*               to any physical block
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Write_Block_Table(int wForce)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	int wSuccess = PASS;
+	u32 wTempBlockTableIndex;
+	u16 bt_pages, new_bt_offset;
+	u8 blockchangeoccured = 0;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	bt_pages = FTL_Get_Block_Table_Flash_Size_Pages();
+
+	if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus)
+		return 0;
+
+	if (PASS == wForce) {
+		g_wBlockTableOffset =
+			(u16)(DeviceInfo.wPagesPerBlock - bt_pages);
+#if CMD_DMA
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+		p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+		p_BTableChangesDelta->g_wBlockTableOffset =
+			g_wBlockTableOffset;
+		p_BTableChangesDelta->ValidFields = 0x01;
+#endif
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"Inside FTL_Write_Block_Table: block %d Page:%d\n",
+		g_wBlockTableIndex, g_wBlockTableOffset);
+
+	do {
+		new_bt_offset = g_wBlockTableOffset + bt_pages + 1;
+		if ((0 == (new_bt_offset % DeviceInfo.wPagesPerBlock)) ||
+			(new_bt_offset > DeviceInfo.wPagesPerBlock) ||
+			(FAIL == wSuccess)) {
+			wTempBlockTableIndex = FTL_Replace_Block_Table();
+			if (BAD_BLOCK == wTempBlockTableIndex)
+				return ERR;
+			if (!blockchangeoccured) {
+				bt_block_changed = 1;
+				blockchangeoccured = 1;
+			}
+
+			g_wBlockTableIndex = wTempBlockTableIndex;
+			g_wBlockTableOffset = 0;
+			pbt[BLOCK_TABLE_INDEX] = g_wBlockTableIndex;
+#if CMD_DMA
+			p_BTableChangesDelta =
+				(struct BTableChangesDelta *)g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+				    ftl_cmd_cnt;
+			p_BTableChangesDelta->g_wBlockTableOffset =
+				    g_wBlockTableOffset;
+			p_BTableChangesDelta->g_wBlockTableIndex =
+				    g_wBlockTableIndex;
+			p_BTableChangesDelta->ValidFields = 0x03;
+
+			p_BTableChangesDelta =
+				(struct BTableChangesDelta *)g_pBTDelta_Free;
+			g_pBTDelta_Free +=
+				sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+				    ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index =
+				    BLOCK_TABLE_INDEX;
+			p_BTableChangesDelta->BT_Entry_Value =
+				    pbt[BLOCK_TABLE_INDEX];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+		}
+
+		wSuccess = FTL_Write_Block_Table_Data();
+		if (FAIL == wSuccess)
+			MARK_BLOCK_AS_BAD(pbt[BLOCK_TABLE_INDEX]);
+	} while (FAIL == wSuccess);
+
+	g_cBlockTableStatus = CURRENT_BLOCK_TABLE;
+
+	return 1;
+}
+
+/******************************************************************
+* Function:     GLOB_FTL_Flash_Format
+* Inputs:       none
+* Outputs:      PASS
+* Description:  The block table stores bad block info, including MDF+
+*               blocks gone bad over the ages. Therefore, if we have a
+*               block table in place, then use it to scan for bad blocks
+*               If not, then scan for MDF.
+*               Now, a block table will only be found if spectra was already
+*               being used. For a fresh flash, we'll go thru scanning for
+*               MDF. If spectra was being used, then there is a chance that
+*               the MDF has been corrupted. Spectra avoids writing to the
+*               first 2 bytes of the spare area to all pages in a block. This
+*               covers all known flash devices. However, since flash
+*               manufacturers have no standard of where the MDF is stored,
+*               this cannot guarantee that the MDF is protected for future
+*               devices too. The initial scanning for the block table assures
+*               this. It is ok even if the block table is outdated, as all
+*               we're looking for are bad block markers.
+*               Use this when mounting a file system or starting a
+*               new flash.
+*
+*********************************************************************/
+static int  FTL_Format_Flash(u8 valid_block_table)
+{
+	u32 i, j;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 tempNode;
+	int ret;
+
+#if CMD_DMA
+	u32 *pbtStartingCopy = (u32 *)g_pBTStartingCopy;
+	if (ftl_cmd_cnt)
+		return FAIL;
+#endif
+
+	if (FAIL == FTL_Check_Block_Table(FAIL))
+		valid_block_table = 0;
+
+	if (valid_block_table) {
+		u8 switched = 1;
+		u32 block, k;
+
+		k = DeviceInfo.wSpectraStartBlock;
+		while (switched && (k < DeviceInfo.wSpectraEndBlock)) {
+			switched = 0;
+			k++;
+			for (j = DeviceInfo.wSpectraStartBlock, i = 0;
+			j <= DeviceInfo.wSpectraEndBlock;
+			j++, i++) {
+				block = (pbt[i] & ~BAD_BLOCK) -
+					DeviceInfo.wSpectraStartBlock;
+				if (block != i) {
+					switched = 1;
+					tempNode = pbt[i];
+					pbt[i] = pbt[block];
+					pbt[block] = tempNode;
+				}
+			}
+		}
+		if ((k == DeviceInfo.wSpectraEndBlock) && switched)
+			valid_block_table = 0;
+	}
+
+	if (!valid_block_table) {
+		memset(g_pBlockTable, 0,
+			DeviceInfo.wDataBlockNum * sizeof(u32));
+		memset(g_pWearCounter, 0,
+			DeviceInfo.wDataBlockNum * sizeof(u8));
+		if (DeviceInfo.MLCDevice)
+			memset(g_pReadCounter, 0,
+				DeviceInfo.wDataBlockNum * sizeof(u16));
+#if CMD_DMA
+		memset(g_pBTStartingCopy, 0,
+			DeviceInfo.wDataBlockNum * sizeof(u32));
+		memset(g_pWearCounterCopy, 0,
+				DeviceInfo.wDataBlockNum * sizeof(u8));
+		if (DeviceInfo.MLCDevice)
+			memset(g_pReadCounterCopy, 0,
+				DeviceInfo.wDataBlockNum * sizeof(u16));
+#endif
+		for (j = DeviceInfo.wSpectraStartBlock, i = 0;
+			j <= DeviceInfo.wSpectraEndBlock;
+			j++, i++) {
+			if (GLOB_LLD_Get_Bad_Block((u32)j))
+				pbt[i] = (u32)(BAD_BLOCK | j);
+		}
+	}
+
+	nand_dbg_print(NAND_DBG_WARN, "Erasing all blocks in the NAND\n");
+
+	for (j = DeviceInfo.wSpectraStartBlock, i = 0;
+		j <= DeviceInfo.wSpectraEndBlock;
+		j++, i++) {
+		if ((pbt[i] & BAD_BLOCK) != BAD_BLOCK) {
+			ret = GLOB_LLD_Erase_Block(j);
+			if (FAIL == ret) {
+				pbt[i] = (u32)(j);
+				MARK_BLOCK_AS_BAD(pbt[i]);
+				nand_dbg_print(NAND_DBG_WARN,
+			       "NAND Program fail in %s, Line %d, "
+			       "Function: %s, new Bad Block %d generated!\n",
+			       __FILE__, __LINE__, __func__, (int)j);
+			} else {
+				pbt[i] = (u32)(SPARE_BLOCK | j);
+			}
+		}
+#if CMD_DMA
+		pbtStartingCopy[i] = pbt[i];
+#endif
+	}
+
+	g_wBlockTableOffset = 0;
+	for (i = 0; (i <= (DeviceInfo.wSpectraEndBlock -
+			DeviceInfo.wSpectraStartBlock))
+			&& ((pbt[i] & BAD_BLOCK) == BAD_BLOCK); i++)
+		;
+	if (i > (DeviceInfo.wSpectraEndBlock - DeviceInfo.wSpectraStartBlock)) {
+		printk(KERN_ERR "All blocks bad!\n");
+		return FAIL;
+	} else {
+		g_wBlockTableIndex = pbt[i] & ~BAD_BLOCK;
+		if (i != BLOCK_TABLE_INDEX) {
+			tempNode = pbt[i];
+			pbt[i] = pbt[BLOCK_TABLE_INDEX];
+			pbt[BLOCK_TABLE_INDEX] = tempNode;
+		}
+	}
+	pbt[BLOCK_TABLE_INDEX] &= (~SPARE_BLOCK);
+
+#if CMD_DMA
+	pbtStartingCopy[BLOCK_TABLE_INDEX] &= (~SPARE_BLOCK);
+#endif
+
+	g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+	memset(g_pBTBlocks, 0xFF,
+			(1 + LAST_BT_ID - FIRST_BT_ID) * sizeof(u32));
+	g_pBTBlocks[FIRST_BT_ID-FIRST_BT_ID] = g_wBlockTableIndex;
+	FTL_Write_Block_Table(FAIL);
+
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		Cache.array[i].address = NAND_CACHE_INIT_ADDR;
+		Cache.array[i].use_cnt = 0;
+		Cache.array[i].changed  = CLEAR;
+	}
+
+#if (RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE && CMD_DMA)
+	memcpy((void *)&cache_start_copy, (void *)&Cache,
+			sizeof(struct flash_cache_tag));
+#endif
+	return PASS;
+}
+
+static int  force_format_nand(void)
+{
+	u32 i;
+
+	/* Force erase the whole unprotected physical partiton of NAND */
+	printk(KERN_ALERT "Start to force erase whole NAND device ...\n");
+	printk(KERN_ALERT "From phyical block %d to %d\n",
+		DeviceInfo.wSpectraStartBlock, DeviceInfo.wSpectraEndBlock);
+	for (i = DeviceInfo.wSpectraStartBlock; i <= DeviceInfo.wSpectraEndBlock; i++) {
+		if (GLOB_LLD_Erase_Block(i))
+			printk(KERN_ERR "Failed to force erase NAND block %d\n", i);
+	}
+	printk(KERN_ALERT "Force Erase ends. Please reboot the system ...\n");
+	while(1);
+
+	return PASS;
+}
+
+int GLOB_FTL_Flash_Format(void)
+{
+	//return FTL_Format_Flash(1);
+	return force_format_nand();
+
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Search_Block_Table_IN_Block
+* Inputs:       Block Number
+*               Pointer to page
+* Outputs:      PASS / FAIL
+*               Page contatining the block table
+* Description:  It searches the block table in the block
+*               passed as an argument.
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Search_Block_Table_IN_Block(u32 BT_Block,
+						u8 BT_Tag, u16 *Page)
+{
+	u16 i, j, k;
+	u16 Result = PASS;
+	u16 Last_IPF = 0;
+	u8  BT_Found = 0;
+	u8 *tagarray;
+	u8 *tempbuf = tmp_buf_search_bt_in_block;
+	u8 *pSpareBuf = spare_buf_search_bt_in_block;
+	u8 *pSpareBufBTLastPage = spare_buf_bt_search_bt_in_block;
+	u8 bt_flag_last_page = 0xFF;
+	u8 search_in_previous_pages = 0;
+	u16 bt_pages;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		       "Searching block table in %u block\n",
+		       (unsigned int)BT_Block);
+
+	bt_pages = FTL_Get_Block_Table_Flash_Size_Pages();
+
+	for (i = bt_pages; i < DeviceInfo.wPagesPerBlock;
+				i += (bt_pages + 1)) {
+		nand_dbg_print(NAND_DBG_DEBUG,
+			       "Searching last IPF: %d\n", i);
+		Result = GLOB_LLD_Read_Page_Main_Polling(tempbuf,
+							BT_Block, i, 1);
+
+		if (0 == memcmp(tempbuf, g_pIPF, DeviceInfo.wPageDataSize)) {
+			if ((i + bt_pages + 1) < DeviceInfo.wPagesPerBlock) {
+				continue;
+			} else {
+				search_in_previous_pages = 1;
+				Last_IPF = i;
+			}
+		}
+
+		if (!search_in_previous_pages) {
+			if (i != bt_pages) {
+				i -= (bt_pages + 1);
+				Last_IPF = i;
+			}
+		}
+
+		if (0 == Last_IPF)
+			break;
+
+		if (!search_in_previous_pages) {
+			i = i + 1;
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Reading the spare area of Block %u Page %u",
+				(unsigned int)BT_Block, i);
+			Result = GLOB_LLD_Read_Page_Spare(pSpareBuf,
+							BT_Block, i, 1);
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Reading the spare area of Block %u Page %u",
+				(unsigned int)BT_Block, i + bt_pages - 1);
+			Result = GLOB_LLD_Read_Page_Spare(pSpareBufBTLastPage,
+				BT_Block, i + bt_pages - 1, 1);
+
+			k = 0;
+			j = FTL_Extract_Block_Table_Tag(pSpareBuf, &tagarray);
+			if (j) {
+				for (; k < j; k++) {
+					if (tagarray[k] == BT_Tag)
+						break;
+				}
+			}
+
+			if (k < j)
+				bt_flag = tagarray[k];
+			else
+				Result = FAIL;
+
+			if (Result == PASS) {
+				k = 0;
+				j = FTL_Extract_Block_Table_Tag(
+					pSpareBufBTLastPage, &tagarray);
+				if (j) {
+					for (; k < j; k++) {
+						if (tagarray[k] == BT_Tag)
+							break;
+					}
+				}
+
+				if (k < j)
+					bt_flag_last_page = tagarray[k];
+				else
+					Result = FAIL;
+
+				if (Result == PASS) {
+					if (bt_flag == bt_flag_last_page) {
+						nand_dbg_print(NAND_DBG_DEBUG,
+							"Block table is found"
+							" in page after IPF "
+							"at block %d "
+							"page %d\n",
+							(int)BT_Block, i);
+						BT_Found = 1;
+						*Page  = i;
+						g_cBlockTableStatus =
+							CURRENT_BLOCK_TABLE;
+						break;
+					} else {
+						Result = FAIL;
+					}
+				}
+			}
+		}
+
+		if (search_in_previous_pages)
+			i = i - bt_pages;
+		else
+			i = i - (bt_pages + 1);
+
+		Result = PASS;
+
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Reading the spare area of Block %d Page %d",
+			(int)BT_Block, i);
+
+		Result = GLOB_LLD_Read_Page_Spare(pSpareBuf, BT_Block, i, 1);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Reading the spare area of Block %u Page %u",
+			(unsigned int)BT_Block, i + bt_pages - 1);
+
+		Result = GLOB_LLD_Read_Page_Spare(pSpareBufBTLastPage,
+					BT_Block, i + bt_pages - 1, 1);
+
+		k = 0;
+		j = FTL_Extract_Block_Table_Tag(pSpareBuf, &tagarray);
+		if (j) {
+			for (; k < j; k++) {
+				if (tagarray[k] == BT_Tag)
+					break;
+			}
+		}
+
+		if (k < j)
+			bt_flag = tagarray[k];
+		else
+			Result = FAIL;
+
+		if (Result == PASS) {
+			k = 0;
+			j = FTL_Extract_Block_Table_Tag(pSpareBufBTLastPage,
+						&tagarray);
+			if (j) {
+				for (; k < j; k++) {
+					if (tagarray[k] == BT_Tag)
+						break;
+				}
+			}
+
+			if (k < j) {
+				bt_flag_last_page = tagarray[k];
+			} else {
+				Result = FAIL;
+				break;
+			}
+
+			if (Result == PASS) {
+				if (bt_flag == bt_flag_last_page) {
+					nand_dbg_print(NAND_DBG_DEBUG,
+						"Block table is found "
+						"in page prior to IPF "
+						"at block %u page %d\n",
+						(unsigned int)BT_Block, i);
+					BT_Found = 1;
+					*Page  = i;
+					g_cBlockTableStatus =
+						IN_PROGRESS_BLOCK_TABLE;
+					break;
+				} else {
+					Result = FAIL;
+					break;
+				}
+			}
+		}
+	}
+
+	if (Result == FAIL) {
+		if ((Last_IPF > bt_pages) && (i < Last_IPF) && (!BT_Found)) {
+			BT_Found = 1;
+			*Page = i - (bt_pages + 1);
+		}
+		if ((Last_IPF == bt_pages) && (i < Last_IPF) && (!BT_Found))
+			goto func_return;
+	}
+
+	if (Last_IPF == 0) {
+		i = 0;
+		Result = PASS;
+		nand_dbg_print(NAND_DBG_DEBUG, "Reading the spare area of "
+			"Block %u Page %u", (unsigned int)BT_Block, i);
+
+		Result = GLOB_LLD_Read_Page_Spare(pSpareBuf, BT_Block, i, 1);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Reading the spare area of Block %u Page %u",
+			(unsigned int)BT_Block, i + bt_pages - 1);
+		Result = GLOB_LLD_Read_Page_Spare(pSpareBufBTLastPage,
+					BT_Block, i + bt_pages - 1, 1);
+
+		k = 0;
+		j = FTL_Extract_Block_Table_Tag(pSpareBuf, &tagarray);
+		if (j) {
+			for (; k < j; k++) {
+				if (tagarray[k] == BT_Tag)
+					break;
+			}
+		}
+
+		if (k < j)
+			bt_flag = tagarray[k];
+		else
+			Result = FAIL;
+
+		if (Result == PASS) {
+			k = 0;
+			j = FTL_Extract_Block_Table_Tag(pSpareBufBTLastPage,
+							&tagarray);
+			if (j) {
+				for (; k < j; k++) {
+					if (tagarray[k] == BT_Tag)
+						break;
+				}
+			}
+
+			if (k < j)
+				bt_flag_last_page = tagarray[k];
+			else
+				Result = FAIL;
+
+			if (Result == PASS) {
+				if (bt_flag == bt_flag_last_page) {
+					nand_dbg_print(NAND_DBG_DEBUG,
+						"Block table is found "
+						"in page after IPF at "
+						"block %u page %u\n",
+						(unsigned int)BT_Block,
+						(unsigned int)i);
+					BT_Found = 1;
+					*Page  = i;
+					g_cBlockTableStatus =
+						CURRENT_BLOCK_TABLE;
+					goto func_return;
+				} else {
+					Result = FAIL;
+				}
+			}
+		}
+
+		if (Result == FAIL)
+			goto func_return;
+	}
+func_return:
+	return Result;
+}
+
+u8 *get_blk_table_start_addr(void)
+{
+	return g_pBlockTable;
+}
+
+unsigned long get_blk_table_len(void)
+{
+	return DeviceInfo.wDataBlockNum * sizeof(u32);
+}
+
+u8 *get_wear_leveling_table_start_addr(void)
+{
+	return g_pWearCounter;
+}
+
+unsigned long get_wear_leveling_table_len(void)
+{
+	return DeviceInfo.wDataBlockNum * sizeof(u8);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Read_Block_Table
+* Inputs:       none
+* Outputs:      PASS / FAIL
+* Description:  read the flash spare area and find a block containing the
+*               most recent block table(having largest block_table_counter).
+*               Find the last written Block table in this block.
+*               Check the correctness of Block Table
+*               If CDMA is enabled, this function is called in
+*               polling mode.
+*               We don't need to store changes in Block table in this
+*               function as it is called only at initialization
+*
+*               Note: Currently this function is called at initialization
+*               before any read/erase/write command issued to flash so,
+*               there is no need to wait for CDMA list to complete as of now
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Read_Block_Table(void)
+{
+	u16 i = 0;
+	int k, j;
+	u8 *tempBuf, *tagarray;
+	int wResult = FAIL;
+	int status = FAIL;
+	u8 block_table_found = 0;
+	int search_result;
+	u32 Block;
+	u16 Page = 0;
+	u16 PageCount;
+	u16 bt_pages;
+	int wBytesCopied = 0, tempvar;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	tempBuf = tmp_buf1_read_blk_table;
+	bt_pages = FTL_Get_Block_Table_Flash_Size_Pages();
+
+	for (j = DeviceInfo.wSpectraStartBlock;
+		j <= (int)DeviceInfo.wSpectraEndBlock;
+			j++) {
+		status = GLOB_LLD_Read_Page_Spare(tempBuf, j, 0, 1);
+		k = 0;
+		i = FTL_Extract_Block_Table_Tag(tempBuf, &tagarray);
+		if (i) {
+			status  = GLOB_LLD_Read_Page_Main_Polling(tempBuf,
+								j, 0, 1);
+			for (; k < i; k++) {
+				if (tagarray[k] == tempBuf[3])
+					break;
+			}
+		}
+
+		if (k < i)
+			k = tagarray[k];
+		else
+			continue;
+
+		nand_dbg_print(NAND_DBG_DEBUG,
+				"Block table is contained in Block %d %d\n",
+				       (unsigned int)j, (unsigned int)k);
+
+		if (g_pBTBlocks[k-FIRST_BT_ID] == BTBLOCK_INVAL) {
+			g_pBTBlocks[k-FIRST_BT_ID] = j;
+			block_table_found = 1;
+		} else {
+			printk(KERN_ERR "FTL_Read_Block_Table -"
+				"This should never happens. "
+				"Two block table have same counter %u!\n", k);
+		}
+	}
+
+	if (block_table_found) {
+		if (g_pBTBlocks[FIRST_BT_ID - FIRST_BT_ID] != BTBLOCK_INVAL &&
+		g_pBTBlocks[LAST_BT_ID - FIRST_BT_ID] != BTBLOCK_INVAL) {
+			j = LAST_BT_ID;
+			while ((j > FIRST_BT_ID) &&
+			(g_pBTBlocks[j - FIRST_BT_ID] != BTBLOCK_INVAL))
+				j--;
+			if (j == FIRST_BT_ID) {
+				j = LAST_BT_ID;
+				last_erased = LAST_BT_ID;
+			} else {
+				last_erased = (u8)j + 1;
+				while ((j > FIRST_BT_ID) && (BTBLOCK_INVAL ==
+					g_pBTBlocks[j - FIRST_BT_ID]))
+					j--;
+			}
+		} else {
+			j = FIRST_BT_ID;
+			while (g_pBTBlocks[j - FIRST_BT_ID] == BTBLOCK_INVAL)
+				j++;
+			last_erased = (u8)j;
+			while ((j < LAST_BT_ID) && (BTBLOCK_INVAL !=
+				g_pBTBlocks[j - FIRST_BT_ID]))
+				j++;
+			if (g_pBTBlocks[j-FIRST_BT_ID] == BTBLOCK_INVAL)
+				j--;
+		}
+
+		if (last_erased > j)
+			j += (1 + LAST_BT_ID - FIRST_BT_ID);
+
+		for (; (j >= last_erased) && (FAIL == wResult); j--) {
+			i = (j - FIRST_BT_ID) %
+				(1 + LAST_BT_ID - FIRST_BT_ID);
+			search_result =
+			FTL_Search_Block_Table_IN_Block(g_pBTBlocks[i],
+						i + FIRST_BT_ID, &Page);
+			if (g_cBlockTableStatus == IN_PROGRESS_BLOCK_TABLE)
+				block_table_found = 0;
+
+			while ((search_result == PASS) && (FAIL == wResult)) {
+				nand_dbg_print(NAND_DBG_DEBUG,
+					"FTL_Read_Block_Table:"
+					"Block: %u Page: %u "
+					"contains block table\n",
+					(unsigned int)g_pBTBlocks[i],
+					(unsigned int)Page);
+
+				tempBuf = tmp_buf2_read_blk_table;
+
+				for (k = 0; k < bt_pages; k++) {
+					Block = g_pBTBlocks[i];
+					PageCount = 1;
+
+					status  =
+					GLOB_LLD_Read_Page_Main_Polling(
+					tempBuf, Block, Page, PageCount);
+
+					tempvar = k ? 0 : 4;
+
+					wBytesCopied +=
+					FTL_Copy_Block_Table_From_Flash(
+					tempBuf + tempvar,
+					DeviceInfo.wPageDataSize - tempvar,
+					wBytesCopied);
+
+					Page++;
+				}
+
+				wResult = FTL_Check_Block_Table(FAIL);
+				if (FAIL == wResult) {
+					block_table_found = 0;
+					if (Page > bt_pages)
+						Page -= ((bt_pages<<1) + 1);
+					else
+						search_result = FAIL;
+				}
+			}
+		}
+	}
+
+	if (PASS == wResult) {
+		if (!block_table_found)
+			FTL_Execute_SPL_Recovery();
+
+		if (g_cBlockTableStatus == IN_PROGRESS_BLOCK_TABLE)
+			g_wBlockTableOffset = (u16)Page + 1;
+		else
+			g_wBlockTableOffset = (u16)Page - bt_pages;
+
+		g_wBlockTableIndex = (u32)g_pBTBlocks[i];
+
+#if CMD_DMA
+		if (DeviceInfo.MLCDevice)
+			memcpy(g_pBTStartingCopy, g_pBlockTable,
+				DeviceInfo.wDataBlockNum * sizeof(u32)
+				+ DeviceInfo.wDataBlockNum * sizeof(u8)
+				+ DeviceInfo.wDataBlockNum * sizeof(u16));
+		else
+			memcpy(g_pBTStartingCopy, g_pBlockTable,
+				DeviceInfo.wDataBlockNum * sizeof(u32)
+				+ DeviceInfo.wDataBlockNum * sizeof(u8));
+#endif
+	}
+
+	if (FAIL == wResult)
+		printk(KERN_ERR "Yunpeng - "
+		"Can not find valid spectra block table!\n");
+
+#if AUTO_FORMAT_FLASH
+	if (FAIL == wResult) {
+		nand_dbg_print(NAND_DBG_DEBUG, "doing auto-format\n");
+		wResult = FTL_Format_Flash(0);
+	}
+#endif
+
+	return wResult;
+}
+
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Flash_Error_Handle
+* Inputs:       Pointer to data
+*               Page address
+*               Block address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  It handles any error occured during Spectra operation
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Flash_Error_Handle(u8 *pData, u64 old_page_addr,
+				u64 blk_addr)
+{
+	u32 i;
+	int j;
+	u32 tmp_node, blk_node = BLK_FROM_ADDR(blk_addr);
+	u64 phy_addr;
+	int wErase = FAIL;
+	int wResult = FAIL;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (ERR == GLOB_FTL_Garbage_Collection())
+		return ERR;
+
+	do {
+		for (i = DeviceInfo.wSpectraEndBlock -
+			DeviceInfo.wSpectraStartBlock;
+					i > 0; i--) {
+			if (IS_SPARE_BLOCK(i)) {
+				tmp_node = (u32)(BAD_BLOCK |
+					pbt[blk_node]);
+				pbt[blk_node] = (u32)(pbt[i] &
+					(~SPARE_BLOCK));
+				pbt[i] = tmp_node;
+#if CMD_DMA
+				p_BTableChangesDelta =
+				    (struct BTableChangesDelta *)
+				    g_pBTDelta_Free;
+				g_pBTDelta_Free +=
+				    sizeof(struct BTableChangesDelta);
+
+				p_BTableChangesDelta->ftl_cmd_cnt =
+				    ftl_cmd_cnt;
+				p_BTableChangesDelta->BT_Index =
+				    blk_node;
+				p_BTableChangesDelta->BT_Entry_Value =
+				    pbt[blk_node];
+				p_BTableChangesDelta->ValidFields = 0x0C;
+
+				p_BTableChangesDelta =
+				    (struct BTableChangesDelta *)
+				    g_pBTDelta_Free;
+				g_pBTDelta_Free +=
+				    sizeof(struct BTableChangesDelta);
+
+				p_BTableChangesDelta->ftl_cmd_cnt =
+				    ftl_cmd_cnt;
+				p_BTableChangesDelta->BT_Index = i;
+				p_BTableChangesDelta->BT_Entry_Value = pbt[i];
+				p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+				wResult = PASS;
+				break;
+			}
+		}
+
+		if (FAIL == wResult) {
+			if (FAIL == GLOB_FTL_Garbage_Collection())
+				break;
+			else
+				continue;
+		}
+
+		if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+
+		phy_addr = FTL_Get_Physical_Block_Addr(blk_addr);
+
+		for (j = 0; j < RETRY_TIMES; j++) {
+			if (PASS == wErase) {
+				if (FAIL == GLOB_FTL_Block_Erase(phy_addr)) {
+					MARK_BLOCK_AS_BAD(pbt[blk_node]);
+					break;
+				}
+			}
+			if (PASS == FTL_Cache_Update_Block(pData,
+							   old_page_addr,
+							   phy_addr)) {
+				wResult = PASS;
+				break;
+			} else {
+				wResult = FAIL;
+				wErase = PASS;
+			}
+		}
+	} while (FAIL == wResult);
+
+	FTL_Write_Block_Table(FAIL);
+
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Get_Page_Num
+* Inputs:       Size in bytes
+* Outputs:      Size in pages
+* Description:  It calculates the pages required for the length passed
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Get_Page_Num(u64 length)
+{
+	return (u32)((length >> DeviceInfo.nBitsInPageDataSize) +
+		(GLOB_u64_Remainder(length , 1) > 0 ? 1 : 0));
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Get_Physical_Block_Addr
+* Inputs:       Block Address (byte format)
+* Outputs:      Physical address of the block.
+* Description:  It translates LBA to PBA by returning address stored
+*               at the LBA location in the block table
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u64 FTL_Get_Physical_Block_Addr(u64 logical_addr)
+{
+	u32 *pbt;
+	u64 physical_addr;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	pbt = (u32 *)g_pBlockTable;
+	physical_addr = (u64) DeviceInfo.wBlockDataSize *
+		(pbt[BLK_FROM_ADDR(logical_addr)] & (~BAD_BLOCK));
+
+	return physical_addr;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Get_Block_Index
+* Inputs:       Physical Block no.
+* Outputs:      Logical block no. /BAD_BLOCK
+* Description:  It returns the logical block no. for the PBA passed
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Get_Block_Index(u32 wBlockNum)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++)
+		if (wBlockNum == (pbt[i] & (~BAD_BLOCK)))
+			return i;
+
+	return BAD_BLOCK;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Wear_Leveling
+* Inputs:       none
+* Outputs:      PASS=0
+* Description:  This is static wear leveling (done by explicit call)
+*               do complete static wear leveling
+*               do complete garbage collection
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Wear_Leveling(void)
+{
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	FTL_Static_Wear_Leveling();
+	GLOB_FTL_Garbage_Collection();
+
+	return PASS;
+}
+
+static void find_least_most_worn(u8 *chg,
+	u32 *least_idx, u8 *least_cnt,
+	u32 *most_idx, u8 *most_cnt)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 idx;
+	u8 cnt;
+	int i;
+
+	for (i = BLOCK_TABLE_INDEX + 1; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_BAD_BLOCK(i) || PASS == chg[i])
+			continue;
+
+		idx = (u32) ((~BAD_BLOCK) & pbt[i]);
+		cnt = g_pWearCounter[idx - DeviceInfo.wSpectraStartBlock];
+
+		if (IS_SPARE_BLOCK(i)) {
+			if (cnt > *most_cnt) {
+				*most_cnt = cnt;
+				*most_idx = idx;
+			}
+		}
+
+		if (IS_DATA_BLOCK(i)) {
+			if (cnt < *least_cnt) {
+				*least_cnt = cnt;
+				*least_idx = idx;
+			}
+		}
+
+		if (PASS == chg[*most_idx] || PASS == chg[*least_idx]) {
+			debug_boundary_error(*most_idx,
+				DeviceInfo.wDataBlockNum, 0);
+			debug_boundary_error(*least_idx,
+				DeviceInfo.wDataBlockNum, 0);
+			continue;
+		}
+	}
+}
+
+static int move_blks_for_wear_leveling(u8 *chg,
+	u32 *least_idx, u32 *rep_blk_num, int *result)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 rep_blk;
+	int j, ret_cp_blk, ret_erase;
+	int ret = PASS;
+
+	chg[*least_idx] = PASS;
+	debug_boundary_error(*least_idx, DeviceInfo.wDataBlockNum, 0);
+
+	rep_blk = FTL_Replace_MWBlock();
+	if (rep_blk != BAD_BLOCK) {
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"More than two spare blocks exist so do it\n");
+		nand_dbg_print(NAND_DBG_DEBUG, "Block Replaced is %d\n",
+				rep_blk);
+
+		chg[rep_blk] = PASS;
+
+		if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+
+		for (j = 0; j < RETRY_TIMES; j++) {
+			ret_cp_blk = FTL_Copy_Block((u64)(*least_idx) *
+				DeviceInfo.wBlockDataSize,
+				(u64)rep_blk * DeviceInfo.wBlockDataSize);
+			if (FAIL == ret_cp_blk) {
+				ret_erase = GLOB_FTL_Block_Erase((u64)rep_blk
+					* DeviceInfo.wBlockDataSize);
+				if (FAIL == ret_erase)
+					MARK_BLOCK_AS_BAD(pbt[rep_blk]);
+			} else {
+				nand_dbg_print(NAND_DBG_DEBUG,
+					"FTL_Copy_Block == OK\n");
+				break;
+			}
+		}
+
+		if (j < RETRY_TIMES) {
+			u32 tmp;
+			u32 old_idx = FTL_Get_Block_Index(*least_idx);
+			u32 rep_idx = FTL_Get_Block_Index(rep_blk);
+			tmp = (u32)(DISCARD_BLOCK | pbt[old_idx]);
+			pbt[old_idx] = (u32)((~SPARE_BLOCK) &
+							pbt[rep_idx]);
+			pbt[rep_idx] = tmp;
+#if CMD_DMA
+			p_BTableChangesDelta = (struct BTableChangesDelta *)
+						g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+			p_BTableChangesDelta->ftl_cmd_cnt =
+						ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index = old_idx;
+			p_BTableChangesDelta->BT_Entry_Value = pbt[old_idx];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+
+			p_BTableChangesDelta = (struct BTableChangesDelta *)
+						g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+						ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index = rep_idx;
+			p_BTableChangesDelta->BT_Entry_Value = pbt[rep_idx];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+		} else {
+			pbt[FTL_Get_Block_Index(rep_blk)] |= BAD_BLOCK;
+#if CMD_DMA
+			p_BTableChangesDelta = (struct BTableChangesDelta *)
+						g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+						ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index =
+					FTL_Get_Block_Index(rep_blk);
+			p_BTableChangesDelta->BT_Entry_Value =
+					pbt[FTL_Get_Block_Index(rep_blk)];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+			*result = FAIL;
+			ret = FAIL;
+		}
+
+		if (((*rep_blk_num)++) > WEAR_LEVELING_BLOCK_NUM)
+			ret = FAIL;
+	} else {
+		printk(KERN_ERR "Less than 3 spare blocks exist so quit\n");
+		ret = FAIL;
+	}
+
+	return ret;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Static_Wear_Leveling
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=1
+* Description:  This is static wear leveling (done by explicit call)
+*               search for most&least used
+*               if difference < GATE:
+*                   update the block table with exhange
+*                   mark block table in flash as IN_PROGRESS
+*                   copy flash block
+*               the caller should handle GC clean up after calling this function
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int FTL_Static_Wear_Leveling(void)
+{
+	u8 most_worn_cnt;
+	u8 least_worn_cnt;
+	u32 most_worn_idx;
+	u32 least_worn_idx;
+	int result = PASS;
+	int go_on = PASS;
+	u32 replaced_blks = 0;
+	u8 *chang_flag = flags_static_wear_leveling;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (!chang_flag)
+		return FAIL;
+
+	memset(chang_flag, FAIL, DeviceInfo.wDataBlockNum);
+	while (go_on == PASS) {
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"starting static wear leveling\n");
+		most_worn_cnt = 0;
+		least_worn_cnt = 0xFF;
+		least_worn_idx = BLOCK_TABLE_INDEX;
+		most_worn_idx = BLOCK_TABLE_INDEX;
+
+		find_least_most_worn(chang_flag, &least_worn_idx,
+			&least_worn_cnt, &most_worn_idx, &most_worn_cnt);
+
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Used and least worn is block %u, whos count is %u\n",
+			(unsigned int)least_worn_idx,
+			(unsigned int)least_worn_cnt);
+
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Free and  most worn is block %u, whos count is %u\n",
+			(unsigned int)most_worn_idx,
+			(unsigned int)most_worn_cnt);
+
+		if ((most_worn_cnt > least_worn_cnt) &&
+			(most_worn_cnt - least_worn_cnt > WEAR_LEVELING_GATE))
+			go_on = move_blks_for_wear_leveling(chang_flag,
+				&least_worn_idx, &replaced_blks, &result);
+		else
+			go_on = FAIL;
+	}
+
+	return result;
+}
+
+#if CMD_DMA
+static int do_garbage_collection(u32 discard_cnt)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 pba;
+	u8 bt_block_erased = 0;
+	int i, cnt, ret = FAIL;
+	u64 addr;
+
+	i = 0;
+	while ((i < DeviceInfo.wDataBlockNum) && (discard_cnt > 0) &&
+			((ftl_cmd_cnt + 28) < 256)) {
+		if (((pbt[i] & BAD_BLOCK) != BAD_BLOCK) &&
+				(pbt[i] & DISCARD_BLOCK)) {
+			if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+				g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+				FTL_Write_IN_Progress_Block_Table_Page();
+			}
+
+			addr = FTL_Get_Physical_Block_Addr((u64)i *
+						DeviceInfo.wBlockDataSize);
+			pba = BLK_FROM_ADDR(addr);
+
+			for (cnt = FIRST_BT_ID; cnt <= LAST_BT_ID; cnt++) {
+				if (pba == g_pBTBlocks[cnt - FIRST_BT_ID]) {
+					nand_dbg_print(NAND_DBG_DEBUG,
+						"GC will erase BT block %u\n",
+						(unsigned int)pba);
+					discard_cnt--;
+					i++;
+					bt_block_erased = 1;
+					break;
+				}
+			}
+
+			if (bt_block_erased) {
+				bt_block_erased = 0;
+				continue;
+			}
+
+			addr = FTL_Get_Physical_Block_Addr((u64)i *
+						DeviceInfo.wBlockDataSize);
+
+			if (PASS == GLOB_FTL_Block_Erase(addr)) {
+				pbt[i] &= (u32)(~DISCARD_BLOCK);
+				pbt[i] |= (u32)(SPARE_BLOCK);
+				p_BTableChangesDelta =
+					(struct BTableChangesDelta *)
+					g_pBTDelta_Free;
+				g_pBTDelta_Free +=
+					sizeof(struct BTableChangesDelta);
+				p_BTableChangesDelta->ftl_cmd_cnt =
+					ftl_cmd_cnt - 1;
+				p_BTableChangesDelta->BT_Index = i;
+				p_BTableChangesDelta->BT_Entry_Value = pbt[i];
+				p_BTableChangesDelta->ValidFields = 0x0C;
+				discard_cnt--;
+				ret = PASS;
+			} else {
+				MARK_BLOCK_AS_BAD(pbt[i]);
+			}
+		}
+
+		i++;
+	}
+
+	return ret;
+}
+
+#else
+static int do_garbage_collection(u32 discard_cnt)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 pba;
+	u8 bt_block_erased = 0;
+	int i, cnt, ret = FAIL;
+	u64 addr;
+
+	i = 0;
+	while ((i < DeviceInfo.wDataBlockNum) && (discard_cnt > 0)) {
+		if (((pbt[i] & BAD_BLOCK) != BAD_BLOCK) &&
+				(pbt[i] & DISCARD_BLOCK)) {
+			if (IN_PROGRESS_BLOCK_TABLE != g_cBlockTableStatus) {
+				g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+				FTL_Write_IN_Progress_Block_Table_Page();
+			}
+
+			addr = FTL_Get_Physical_Block_Addr((u64)i *
+						DeviceInfo.wBlockDataSize);
+			pba = BLK_FROM_ADDR(addr);
+
+			for (cnt = FIRST_BT_ID; cnt <= LAST_BT_ID; cnt++) {
+				if (pba == g_pBTBlocks[cnt - FIRST_BT_ID]) {
+					nand_dbg_print(NAND_DBG_DEBUG,
+						"GC will erase BT block %d\n",
+						pba);
+					discard_cnt--;
+					i++;
+					bt_block_erased = 1;
+					break;
+				}
+			}
+
+			if (bt_block_erased) {
+				bt_block_erased = 0;
+				continue;
+			}
+
+			/* If the discard block is L2 cache block, then just skip it */
+			for (cnt = 0; cnt < BLK_NUM_FOR_L2_CACHE; cnt++) {
+				if (cache_l2.blk_array[cnt] == pba) {
+					nand_dbg_print(NAND_DBG_DEBUG,
+						"GC will erase L2 cache blk %d\n",
+						pba);
+					break;
+				}
+			}
+			if (cnt < BLK_NUM_FOR_L2_CACHE) { /* Skip it */
+				discard_cnt--;
+				i++;
+				continue;
+			}
+
+			addr = FTL_Get_Physical_Block_Addr((u64)i *
+						DeviceInfo.wBlockDataSize);
+
+			if (PASS == GLOB_FTL_Block_Erase(addr)) {
+				pbt[i] &= (u32)(~DISCARD_BLOCK);
+				pbt[i] |= (u32)(SPARE_BLOCK);
+				discard_cnt--;
+				ret = PASS;
+			} else {
+				MARK_BLOCK_AS_BAD(pbt[i]);
+			}
+		}
+
+		i++;
+	}
+
+	return ret;
+}
+#endif
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Garbage_Collection
+* Inputs:       none
+* Outputs:      PASS / FAIL (returns the number of un-erased blocks
+* Description:  search the block table for all discarded blocks to erase
+*               for each discarded block:
+*                   set the flash block to IN_PROGRESS
+*                   erase the block
+*                   update the block table
+*                   write the block table to flash
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Garbage_Collection(void)
+{
+	u32 i;
+	u32 wDiscard = 0;
+	int wResult = FAIL;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	if (GC_Called) {
+		printk(KERN_ALERT "GLOB_FTL_Garbage_Collection() "
+			"has been re-entered! Exit.\n");
+		return PASS;
+	}
+
+	GC_Called = 1;
+
+	GLOB_FTL_BT_Garbage_Collection();
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_DISCARDED_BLOCK(i))
+			wDiscard++;
+	}
+
+	if (wDiscard <= 0) {
+		GC_Called = 0;
+		return wResult;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"Found %d discarded blocks\n", wDiscard);
+
+	FTL_Write_Block_Table(FAIL);
+
+	wResult = do_garbage_collection(wDiscard);
+
+	FTL_Write_Block_Table(FAIL);
+
+	GC_Called = 0;
+
+	return wResult;
+}
+
+
+#if CMD_DMA
+static int do_bt_garbage_collection(void)
+{
+	u32 pba, lba;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 *pBTBlocksNode = (u32 *)g_pBTBlocks;
+	u64 addr;
+	int i, ret = FAIL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	if (BT_GC_Called)
+		return PASS;
+
+	BT_GC_Called = 1;
+
+	for (i = last_erased; (i <= LAST_BT_ID) &&
+		(g_pBTBlocks[((i + 2) % (1 + LAST_BT_ID - FIRST_BT_ID)) +
+		FIRST_BT_ID - FIRST_BT_ID] != BTBLOCK_INVAL) &&
+		((ftl_cmd_cnt + 28)) < 256; i++) {
+		pba = pBTBlocksNode[i - FIRST_BT_ID];
+		lba = FTL_Get_Block_Index(pba);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"do_bt_garbage_collection: pba %d, lba %d\n",
+			pba, lba);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Block Table Entry: %d", pbt[lba]);
+
+		if (((pbt[lba] & BAD_BLOCK) != BAD_BLOCK) &&
+			(pbt[lba] & DISCARD_BLOCK)) {
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"do_bt_garbage_collection_cdma: "
+				"Erasing Block tables present in block %d\n",
+				pba);
+			addr = FTL_Get_Physical_Block_Addr((u64)lba *
+						DeviceInfo.wBlockDataSize);
+			if (PASS == GLOB_FTL_Block_Erase(addr)) {
+				pbt[lba] &= (u32)(~DISCARD_BLOCK);
+				pbt[lba] |= (u32)(SPARE_BLOCK);
+
+				p_BTableChangesDelta =
+					(struct BTableChangesDelta *)
+					g_pBTDelta_Free;
+				g_pBTDelta_Free +=
+					sizeof(struct BTableChangesDelta);
+
+				p_BTableChangesDelta->ftl_cmd_cnt =
+					ftl_cmd_cnt - 1;
+				p_BTableChangesDelta->BT_Index = lba;
+				p_BTableChangesDelta->BT_Entry_Value =
+								pbt[lba];
+
+				p_BTableChangesDelta->ValidFields = 0x0C;
+
+				ret = PASS;
+				pBTBlocksNode[last_erased - FIRST_BT_ID] =
+							BTBLOCK_INVAL;
+				nand_dbg_print(NAND_DBG_DEBUG,
+					"resetting bt entry at index %d "
+					"value %d\n", i,
+					pBTBlocksNode[i - FIRST_BT_ID]);
+				if (last_erased == LAST_BT_ID)
+					last_erased = FIRST_BT_ID;
+				else
+					last_erased++;
+			} else {
+				MARK_BLOCK_AS_BAD(pbt[lba]);
+			}
+		}
+	}
+
+	BT_GC_Called = 0;
+
+	return ret;
+}
+
+#else
+static int do_bt_garbage_collection(void)
+{
+	u32 pba, lba;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 *pBTBlocksNode = (u32 *)g_pBTBlocks;
+	u64 addr;
+	int i, ret = FAIL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	if (BT_GC_Called)
+		return PASS;
+
+	BT_GC_Called = 1;
+
+	for (i = last_erased; (i <= LAST_BT_ID) &&
+		(g_pBTBlocks[((i + 2) % (1 + LAST_BT_ID - FIRST_BT_ID)) +
+		FIRST_BT_ID - FIRST_BT_ID] != BTBLOCK_INVAL); i++) {
+		pba = pBTBlocksNode[i - FIRST_BT_ID];
+		lba = FTL_Get_Block_Index(pba);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"do_bt_garbage_collection_cdma: pba %d, lba %d\n",
+			pba, lba);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Block Table Entry: %d", pbt[lba]);
+
+		if (((pbt[lba] & BAD_BLOCK) != BAD_BLOCK) &&
+			(pbt[lba] & DISCARD_BLOCK)) {
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"do_bt_garbage_collection: "
+				"Erasing Block tables present in block %d\n",
+				pba);
+			addr = FTL_Get_Physical_Block_Addr((u64)lba *
+						DeviceInfo.wBlockDataSize);
+			if (PASS == GLOB_FTL_Block_Erase(addr)) {
+				pbt[lba] &= (u32)(~DISCARD_BLOCK);
+				pbt[lba] |= (u32)(SPARE_BLOCK);
+				ret = PASS;
+				pBTBlocksNode[last_erased - FIRST_BT_ID] =
+							BTBLOCK_INVAL;
+				nand_dbg_print(NAND_DBG_DEBUG,
+					"resetting bt entry at index %d "
+					"value %d\n", i,
+					pBTBlocksNode[i - FIRST_BT_ID]);
+				if (last_erased == LAST_BT_ID)
+					last_erased = FIRST_BT_ID;
+				else
+					last_erased++;
+			} else {
+				MARK_BLOCK_AS_BAD(pbt[lba]);
+			}
+		}
+	}
+
+	BT_GC_Called = 0;
+
+	return ret;
+}
+
+#endif
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_BT_Garbage_Collection
+* Inputs:       none
+* Outputs:      PASS / FAIL (returns the number of un-erased blocks
+* Description:  Erases discarded blocks containing Block table
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_BT_Garbage_Collection(void)
+{
+	return do_bt_garbage_collection();
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Replace_OneBlock
+* Inputs:       Block number 1
+*               Block number 2
+* Outputs:      Replaced Block Number
+* Description:  Interchange block table entries at wBlockNum and wReplaceNum
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Replace_OneBlock(u32 blk, u32 rep_blk)
+{
+	u32 tmp_blk;
+	u32 replace_node = BAD_BLOCK;
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	if (rep_blk != BAD_BLOCK) {
+		if (IS_BAD_BLOCK(blk))
+			tmp_blk = pbt[blk];
+		else
+			tmp_blk = DISCARD_BLOCK | (~SPARE_BLOCK & pbt[blk]);
+
+		replace_node = (u32) ((~SPARE_BLOCK) & pbt[rep_blk]);
+		pbt[blk] = replace_node;
+		pbt[rep_blk] = tmp_blk;
+
+#if CMD_DMA
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+		p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+		p_BTableChangesDelta->BT_Index = blk;
+		p_BTableChangesDelta->BT_Entry_Value = pbt[blk];
+
+		p_BTableChangesDelta->ValidFields = 0x0C;
+
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+		p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+		p_BTableChangesDelta->BT_Index = rep_blk;
+		p_BTableChangesDelta->BT_Entry_Value = pbt[rep_blk];
+		p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+	}
+
+	return replace_node;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Write_Block_Table_Data
+* Inputs:       Block table size in pages
+* Outputs:      PASS=0 / FAIL=1
+* Description:  Write block table data in flash
+*               If first page and last page
+*                  Write data+BT flag
+*               else
+*                  Write data
+*               BT flag is a counter. Its value is incremented for block table
+*               write in a new Block
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Write_Block_Table_Data(void)
+{
+	u64 dwBlockTableAddr, pTempAddr;
+	u32 Block;
+	u16 Page, PageCount;
+	u8 *tempBuf = tmp_buf_write_blk_table_data;
+	int wBytesCopied;
+	u16 bt_pages;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	dwBlockTableAddr =
+		(u64)((u64)g_wBlockTableIndex * DeviceInfo.wBlockDataSize +
+		(u64)g_wBlockTableOffset * DeviceInfo.wPageDataSize);
+	pTempAddr = dwBlockTableAddr;
+
+	bt_pages = FTL_Get_Block_Table_Flash_Size_Pages();
+
+	nand_dbg_print(NAND_DBG_DEBUG, "FTL_Write_Block_Table_Data: "
+			       "page= %d BlockTableIndex= %d "
+			       "BlockTableOffset=%d\n", bt_pages,
+			       g_wBlockTableIndex, g_wBlockTableOffset);
+
+	Block = BLK_FROM_ADDR(pTempAddr);
+	Page = PAGE_FROM_ADDR(pTempAddr, Block);
+	PageCount = 1;
+
+	if (bt_block_changed) {
+		if (bt_flag == LAST_BT_ID) {
+			bt_flag = FIRST_BT_ID;
+			g_pBTBlocks[bt_flag - FIRST_BT_ID] = Block;
+		} else if (bt_flag < LAST_BT_ID) {
+			bt_flag++;
+			g_pBTBlocks[bt_flag - FIRST_BT_ID] = Block;
+		}
+
+		if ((bt_flag > (LAST_BT_ID-4)) &&
+			g_pBTBlocks[FIRST_BT_ID - FIRST_BT_ID] !=
+						BTBLOCK_INVAL) {
+			bt_block_changed = 0;
+			GLOB_FTL_BT_Garbage_Collection();
+		}
+
+		bt_block_changed = 0;
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Block Table Counter is %u Block %u\n",
+			bt_flag, (unsigned int)Block);
+	}
+
+	memset(tempBuf, 0, 3);
+	tempBuf[3] = bt_flag;
+	wBytesCopied = FTL_Copy_Block_Table_To_Flash(tempBuf + 4,
+			DeviceInfo.wPageDataSize - 4, 0);
+	memset(&tempBuf[wBytesCopied + 4], 0xff,
+		DeviceInfo.wPageSize - (wBytesCopied + 4));
+	FTL_Insert_Block_Table_Signature(&tempBuf[DeviceInfo.wPageDataSize],
+					bt_flag);
+
+#if CMD_DMA
+	memcpy(g_pNextBlockTable, tempBuf,
+		DeviceInfo.wPageSize * sizeof(u8));
+	nand_dbg_print(NAND_DBG_DEBUG, "Writing First Page of Block Table "
+		"Block %u Page %u\n", (unsigned int)Block, Page);
+	if (FAIL == GLOB_LLD_Write_Page_Main_Spare_cdma(g_pNextBlockTable,
+		Block, Page, 1,
+		LLD_CMD_FLAG_MODE_CDMA | LLD_CMD_FLAG_ORDER_BEFORE_REST)) {
+		nand_dbg_print(NAND_DBG_WARN, "NAND Program fail in "
+			"%s, Line %d, Function: %s, "
+			"new Bad Block %d generated!\n",
+			__FILE__, __LINE__, __func__, Block);
+		goto func_return;
+	}
+
+	ftl_cmd_cnt++;
+	g_pNextBlockTable += ((DeviceInfo.wPageSize * sizeof(u8)));
+#else
+	if (FAIL == GLOB_LLD_Write_Page_Main_Spare(tempBuf, Block, Page, 1)) {
+		nand_dbg_print(NAND_DBG_WARN,
+			"NAND Program fail in %s, Line %d, Function: %s, "
+			"new Bad Block %d generated!\n",
+			__FILE__, __LINE__, __func__, Block);
+		goto func_return;
+	}
+#endif
+
+	if (bt_pages > 1) {
+		PageCount = bt_pages - 1;
+		if (PageCount > 1) {
+			wBytesCopied += FTL_Copy_Block_Table_To_Flash(tempBuf,
+				DeviceInfo.wPageDataSize * (PageCount - 1),
+				wBytesCopied);
+
+#if CMD_DMA
+			memcpy(g_pNextBlockTable, tempBuf,
+				(PageCount - 1) * DeviceInfo.wPageDataSize);
+			if (FAIL == GLOB_LLD_Write_Page_Main_cdma(
+				g_pNextBlockTable, Block, Page + 1,
+				PageCount - 1)) {
+				nand_dbg_print(NAND_DBG_WARN,
+					"NAND Program fail in %s, Line %d, "
+					"Function: %s, "
+					"new Bad Block %d generated!\n",
+					__FILE__, __LINE__, __func__,
+					(int)Block);
+				goto func_return;
+			}
+
+			ftl_cmd_cnt++;
+			g_pNextBlockTable += (PageCount - 1) *
+				DeviceInfo.wPageDataSize * sizeof(u8);
+#else
+			if (FAIL == GLOB_LLD_Write_Page_Main(tempBuf,
+					Block, Page + 1, PageCount - 1)) {
+				nand_dbg_print(NAND_DBG_WARN,
+					"NAND Program fail in %s, Line %d, "
+					"Function: %s, "
+					"new Bad Block %d generated!\n",
+					__FILE__, __LINE__, __func__,
+					(int)Block);
+				goto func_return;
+			}
+#endif
+		}
+
+		wBytesCopied = FTL_Copy_Block_Table_To_Flash(tempBuf,
+				DeviceInfo.wPageDataSize, wBytesCopied);
+		memset(&tempBuf[wBytesCopied], 0xff,
+			DeviceInfo.wPageSize-wBytesCopied);
+		FTL_Insert_Block_Table_Signature(
+			&tempBuf[DeviceInfo.wPageDataSize], bt_flag);
+#if CMD_DMA
+		memcpy(g_pNextBlockTable, tempBuf,
+				DeviceInfo.wPageSize * sizeof(u8));
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Writing the last Page of Block Table "
+			"Block %u Page %u\n",
+			(unsigned int)Block, Page + bt_pages - 1);
+		if (FAIL == GLOB_LLD_Write_Page_Main_Spare_cdma(
+			g_pNextBlockTable, Block, Page + bt_pages - 1, 1,
+			LLD_CMD_FLAG_MODE_CDMA |
+			LLD_CMD_FLAG_ORDER_BEFORE_REST)) {
+			nand_dbg_print(NAND_DBG_WARN,
+				"NAND Program fail in %s, Line %d, "
+				"Function: %s, new Bad Block %d generated!\n",
+				__FILE__, __LINE__, __func__, Block);
+			goto func_return;
+		}
+		ftl_cmd_cnt++;
+#else
+		if (FAIL == GLOB_LLD_Write_Page_Main_Spare(tempBuf,
+					Block, Page+bt_pages - 1, 1)) {
+			nand_dbg_print(NAND_DBG_WARN,
+				"NAND Program fail in %s, Line %d, "
+				"Function: %s, "
+				"new Bad Block %d generated!\n",
+				__FILE__, __LINE__, __func__, Block);
+			goto func_return;
+		}
+#endif
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "FTL_Write_Block_Table_Data: done\n");
+
+func_return:
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Replace_Block_Table
+* Inputs:       None
+* Outputs:      PASS=0 / FAIL=1
+* Description:  Get a new block to write block table
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Replace_Block_Table(void)
+{
+	u32 blk;
+	int gc;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	blk = FTL_Replace_LWBlock(BLOCK_TABLE_INDEX, &gc);
+
+	if ((BAD_BLOCK == blk) && (PASS == gc)) {
+		GLOB_FTL_Garbage_Collection();
+		blk = FTL_Replace_LWBlock(BLOCK_TABLE_INDEX, &gc);
+	}
+	if (BAD_BLOCK == blk)
+		printk(KERN_ERR "%s, %s: There is no spare block. "
+			"It should never happen\n",
+			__FILE__, __func__);
+
+	nand_dbg_print(NAND_DBG_DEBUG, "New Block table Block is %d\n", blk);
+
+	return blk;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Replace_LWBlock
+* Inputs:       Block number
+*               Pointer to Garbage Collect flag
+* Outputs:
+* Description:  Determine the least weared block by traversing
+*               block table
+*               Set Garbage collection to be called if number of spare
+*               block is less than Free Block Gate count
+*               Change Block table entry to map least worn block for current
+*               operation
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Replace_LWBlock(u32 wBlockNum, int *pGarbageCollect)
+{
+	u32 i;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u8 wLeastWornCounter = 0xFF;
+	u32 wLeastWornIndex = BAD_BLOCK;
+	u32 wSpareBlockNum = 0;
+	u32 wDiscardBlockNum = 0;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	if (IS_SPARE_BLOCK(wBlockNum)) {
+		*pGarbageCollect = FAIL;
+		pbt[wBlockNum] = (u32)(pbt[wBlockNum] & (~SPARE_BLOCK));
+#if CMD_DMA
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+		p_BTableChangesDelta->ftl_cmd_cnt =
+						ftl_cmd_cnt;
+		p_BTableChangesDelta->BT_Index = (u32)(wBlockNum);
+		p_BTableChangesDelta->BT_Entry_Value = pbt[wBlockNum];
+		p_BTableChangesDelta->ValidFields = 0x0C;
+#endif
+		return pbt[wBlockNum];
+	}
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_DISCARDED_BLOCK(i))
+			wDiscardBlockNum++;
+
+		if (IS_SPARE_BLOCK(i)) {
+			u32 wPhysicalIndex = (u32)((~BAD_BLOCK) & pbt[i]);
+			if (wPhysicalIndex > DeviceInfo.wSpectraEndBlock)
+				printk(KERN_ERR "FTL_Replace_LWBlock: "
+					"This should never occur!\n");
+			if (g_pWearCounter[wPhysicalIndex -
+				DeviceInfo.wSpectraStartBlock] <
+				wLeastWornCounter) {
+				wLeastWornCounter =
+					g_pWearCounter[wPhysicalIndex -
+					DeviceInfo.wSpectraStartBlock];
+				wLeastWornIndex = i;
+			}
+			wSpareBlockNum++;
+		}
+	}
+
+	nand_dbg_print(NAND_DBG_WARN,
+		"FTL_Replace_LWBlock: Least Worn Counter %d\n",
+		(int)wLeastWornCounter);
+
+	if ((wDiscardBlockNum >= NUM_FREE_BLOCKS_GATE) ||
+		(wSpareBlockNum <= NUM_FREE_BLOCKS_GATE))
+		*pGarbageCollect = PASS;
+	else
+		*pGarbageCollect = FAIL;
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"FTL_Replace_LWBlock: Discarded Blocks %u Spare"
+		" Blocks %u\n",
+		(unsigned int)wDiscardBlockNum,
+		(unsigned int)wSpareBlockNum);
+
+	return FTL_Replace_OneBlock(wBlockNum, wLeastWornIndex);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Replace_MWBlock
+* Inputs:       None
+* Outputs:      most worn spare block no./BAD_BLOCK
+* Description:  It finds most worn spare block.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static u32 FTL_Replace_MWBlock(void)
+{
+	u32 i;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u8 wMostWornCounter = 0;
+	u32 wMostWornIndex = BAD_BLOCK;
+	u32 wSpareBlockNum = 0;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_SPARE_BLOCK(i)) {
+			u32 wPhysicalIndex = (u32)((~SPARE_BLOCK) & pbt[i]);
+			if (g_pWearCounter[wPhysicalIndex -
+			    DeviceInfo.wSpectraStartBlock] >
+			    wMostWornCounter) {
+				wMostWornCounter =
+				    g_pWearCounter[wPhysicalIndex -
+				    DeviceInfo.wSpectraStartBlock];
+				wMostWornIndex = wPhysicalIndex;
+			}
+			wSpareBlockNum++;
+		}
+	}
+
+	if (wSpareBlockNum <= 2)
+		return BAD_BLOCK;
+
+	return wMostWornIndex;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Replace_Block
+* Inputs:       Block Address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  If block specified by blk_addr parameter is not free,
+*               replace it with the least worn block.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Replace_Block(u64 blk_addr)
+{
+	u32 current_blk = BLK_FROM_ADDR(blk_addr);
+	u32 *pbt = (u32 *)g_pBlockTable;
+	int wResult = PASS;
+	int GarbageCollect = FAIL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	if (IS_SPARE_BLOCK(current_blk)) {
+		pbt[current_blk] = (~SPARE_BLOCK) & pbt[current_blk];
+#if CMD_DMA
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+		p_BTableChangesDelta->ftl_cmd_cnt =
+			ftl_cmd_cnt;
+		p_BTableChangesDelta->BT_Index = current_blk;
+		p_BTableChangesDelta->BT_Entry_Value = pbt[current_blk];
+		p_BTableChangesDelta->ValidFields = 0x0C ;
+#endif
+		return wResult;
+	}
+
+	FTL_Replace_LWBlock(current_blk, &GarbageCollect);
+
+	if (PASS == GarbageCollect)
+		wResult = GLOB_FTL_Garbage_Collection();
+
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Is_BadBlock
+* Inputs:       block number to test
+* Outputs:      PASS (block is BAD) / FAIL (block is not bad)
+* Description:  test if this block number is flagged as bad
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Is_BadBlock(u32 wBlockNum)
+{
+	u32 *pbt = (u32 *)g_pBlockTable;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	if (wBlockNum >= DeviceInfo.wSpectraStartBlock
+		&& BAD_BLOCK == (pbt[wBlockNum] & BAD_BLOCK))
+		return PASS;
+	else
+		return FAIL;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Flush_Cache
+* Inputs:       none
+* Outputs:      PASS=0 / FAIL=1
+* Description:  flush all the cache blocks to flash
+*               if a cache block is not dirty, don't do anything with it
+*               else, write the block and update the block table
+* Note:         This function should be called at shutdown/power down.
+*               to write important data into device
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Flush_Cache(void)
+{
+	int i, ret;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < CACHE_ITEM_NUM; i++) {
+		if (SET == Cache.array[i].changed) {
+#if CMD_DMA
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+			int_cache[ftl_cmd_cnt].item = i;
+			int_cache[ftl_cmd_cnt].cache.address =
+					Cache.array[i].address;
+			int_cache[ftl_cmd_cnt].cache.changed = CLEAR;
+#endif
+#endif
+			ret = write_back_to_l2_cache(Cache.array[i].buf, Cache.array[i].address);
+			if (PASS == ret) {
+				Cache.array[i].changed = CLEAR;
+			} else {
+				printk(KERN_ALERT "Failed when write back to L2 cache!\n");
+				/* TODO - How to handle this? */
+			}
+		}
+	}
+
+	flush_l2_cache();
+
+	return FTL_Write_Block_Table(FAIL);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Page_Read
+* Inputs:       pointer to data
+*                   logical address of data (u64 is LBA * Bytes/Page)
+* Outputs:      PASS=0 / FAIL=1
+* Description:  reads a page of data into RAM from the cache
+*               if the data is not already in cache, read from flash to cache
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Page_Read(u8 *data, u64 logical_addr)
+{
+	u16 cache_item;
+	int res = PASS;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "GLOB_FTL_Page_Read - "
+		"page_addr: %llu\n", logical_addr);
+
+	cache_item = FTL_Cache_If_Hit(logical_addr);
+
+	if (UNHIT_CACHE_ITEM == cache_item) {
+		nand_dbg_print(NAND_DBG_DEBUG,
+			       "GLOB_FTL_Page_Read: Cache not hit\n");
+		res = FTL_Cache_Write();
+		if (ERR == FTL_Cache_Read(logical_addr))
+			res = ERR;
+		cache_item = Cache.LRU;
+	}
+
+	FTL_Cache_Read_Page(data, logical_addr, cache_item);
+
+	return res;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Page_Write
+* Inputs:       pointer to data
+*               address of data (ADDRESSTYPE is LBA * Bytes/Page)
+* Outputs:      PASS=0 / FAIL=1
+* Description:  writes a page of data from RAM to the cache
+*               if the data is not already in cache, write back the
+*               least recently used block and read the addressed block
+*               from flash to cache
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Page_Write(u8 *pData, u64 dwPageAddr)
+{
+	u16 cache_blk;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	int wResult = PASS;
+
+	nand_dbg_print(NAND_DBG_TRACE, "GLOB_FTL_Page_Write - "
+		"dwPageAddr: %llu\n", dwPageAddr);
+
+	cache_blk = FTL_Cache_If_Hit(dwPageAddr);
+
+	if (UNHIT_CACHE_ITEM == cache_blk) {
+		wResult = FTL_Cache_Write();
+		if (IS_BAD_BLOCK(BLK_FROM_ADDR(dwPageAddr))) {
+			wResult = FTL_Replace_Block(dwPageAddr);
+			pbt[BLK_FROM_ADDR(dwPageAddr)] |= SPARE_BLOCK;
+			if (wResult == FAIL)
+				return FAIL;
+		}
+		if (ERR == FTL_Cache_Read(dwPageAddr))
+			wResult = ERR;
+		cache_blk = Cache.LRU;
+		FTL_Cache_Write_Page(pData, dwPageAddr, cache_blk, 0);
+	} else {
+#if CMD_DMA
+		FTL_Cache_Write_Page(pData, dwPageAddr, cache_blk,
+				LLD_CMD_FLAG_ORDER_BEFORE_REST);
+#else
+		FTL_Cache_Write_Page(pData, dwPageAddr, cache_blk, 0);
+#endif
+	}
+
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     GLOB_FTL_Block_Erase
+* Inputs:       address of block to erase (now in byte format, should change to
+* block format)
+* Outputs:      PASS=0 / FAIL=1
+* Description:  erases the specified block
+*               increments the erase count
+*               If erase count reaches its upper limit,call function to
+*               do the ajustment as per the relative erase count values
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int GLOB_FTL_Block_Erase(u64 blk_addr)
+{
+	int status;
+	u32 BlkIdx;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	BlkIdx = (u32)(blk_addr >> DeviceInfo.nBitsInBlockDataSize);
+
+	if (BlkIdx < DeviceInfo.wSpectraStartBlock) {
+		printk(KERN_ERR "GLOB_FTL_Block_Erase: "
+			"This should never occur\n");
+		return FAIL;
+	}
+
+#if CMD_DMA
+	status = GLOB_LLD_Erase_Block_cdma(BlkIdx, LLD_CMD_FLAG_MODE_CDMA);
+	if (status == FAIL)
+		nand_dbg_print(NAND_DBG_WARN,
+			       "NAND Program fail in %s, Line %d, "
+			       "Function: %s, new Bad Block %d generated!\n",
+			       __FILE__, __LINE__, __func__, BlkIdx);
+#else
+	status = GLOB_LLD_Erase_Block(BlkIdx);
+	if (status == FAIL) {
+		nand_dbg_print(NAND_DBG_WARN,
+			       "NAND Program fail in %s, Line %d, "
+			       "Function: %s, new Bad Block %d generated!\n",
+			       __FILE__, __LINE__, __func__, BlkIdx);
+		return status;
+	}
+#endif
+
+	if (DeviceInfo.MLCDevice) {
+		g_pReadCounter[BlkIdx - DeviceInfo.wSpectraStartBlock] = 0;
+		if (g_cBlockTableStatus != IN_PROGRESS_BLOCK_TABLE) {
+			g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+			FTL_Write_IN_Progress_Block_Table_Page();
+		}
+	}
+
+	g_pWearCounter[BlkIdx - DeviceInfo.wSpectraStartBlock]++;
+
+#if CMD_DMA
+	p_BTableChangesDelta =
+		(struct BTableChangesDelta *)g_pBTDelta_Free;
+	g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+	p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+	p_BTableChangesDelta->WC_Index =
+		BlkIdx - DeviceInfo.wSpectraStartBlock;
+	p_BTableChangesDelta->WC_Entry_Value =
+		g_pWearCounter[BlkIdx - DeviceInfo.wSpectraStartBlock];
+	p_BTableChangesDelta->ValidFields = 0x30;
+
+	if (DeviceInfo.MLCDevice) {
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+		p_BTableChangesDelta->ftl_cmd_cnt =
+			ftl_cmd_cnt;
+		p_BTableChangesDelta->RC_Index =
+			BlkIdx - DeviceInfo.wSpectraStartBlock;
+		p_BTableChangesDelta->RC_Entry_Value =
+			g_pReadCounter[BlkIdx -
+				DeviceInfo.wSpectraStartBlock];
+		p_BTableChangesDelta->ValidFields = 0xC0;
+	}
+
+	ftl_cmd_cnt++;
+#endif
+
+	if (g_pWearCounter[BlkIdx - DeviceInfo.wSpectraStartBlock] == 0xFE)
+		FTL_Adjust_Relative_Erase_Count(BlkIdx);
+
+	return status;
+}
+
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Adjust_Relative_Erase_Count
+* Inputs:       index to block that was just incremented and is at the max
+* Outputs:      PASS=0 / FAIL=1
+* Description:  If any erase counts at MAX, adjusts erase count of every
+*               block by substracting least worn
+*               counter from counter value of every entry in wear table
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+static int FTL_Adjust_Relative_Erase_Count(u32 Index_of_MAX)
+{
+	u8 wLeastWornCounter = MAX_BYTE_VALUE;
+	u8 wWearCounter;
+	u32 i, wWearIndex;
+	u32 *pbt = (u32 *)g_pBlockTable;
+	int wResult = PASS;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		__FILE__, __LINE__, __func__);
+
+	for (i = 0; i < DeviceInfo.wDataBlockNum; i++) {
+		if (IS_BAD_BLOCK(i))
+			continue;
+		wWearIndex = (u32)(pbt[i] & (~BAD_BLOCK));
+
+		if ((wWearIndex - DeviceInfo.wSpectraStartBlock) < 0)
+			printk(KERN_ERR "FTL_Adjust_Relative_Erase_Count:"
+					"This should never occur\n");
+		wWearCounter = g_pWearCounter[wWearIndex -
+			DeviceInfo.wSpectraStartBlock];
+		if (wWearCounter < wLeastWornCounter)
+			wLeastWornCounter = wWearCounter;
+	}
+
+	if (wLeastWornCounter == 0) {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Adjusting Wear Levelling Counters: Special Case\n");
+		g_pWearCounter[Index_of_MAX -
+			DeviceInfo.wSpectraStartBlock]--;
+#if CMD_DMA
+		p_BTableChangesDelta =
+			(struct BTableChangesDelta *)g_pBTDelta_Free;
+		g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+		p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+		p_BTableChangesDelta->WC_Index =
+			Index_of_MAX - DeviceInfo.wSpectraStartBlock;
+		p_BTableChangesDelta->WC_Entry_Value =
+			g_pWearCounter[Index_of_MAX -
+				DeviceInfo.wSpectraStartBlock];
+		p_BTableChangesDelta->ValidFields = 0x30;
+#endif
+		FTL_Static_Wear_Leveling();
+	} else {
+		for (i = 0; i < DeviceInfo.wDataBlockNum; i++)
+			if (!IS_BAD_BLOCK(i)) {
+				wWearIndex = (u32)(pbt[i] & (~BAD_BLOCK));
+				g_pWearCounter[wWearIndex -
+					DeviceInfo.wSpectraStartBlock] =
+					(u8)(g_pWearCounter
+					[wWearIndex -
+					DeviceInfo.wSpectraStartBlock] -
+					wLeastWornCounter);
+#if CMD_DMA
+				p_BTableChangesDelta =
+				(struct BTableChangesDelta *)g_pBTDelta_Free;
+				g_pBTDelta_Free +=
+					sizeof(struct BTableChangesDelta);
+
+				p_BTableChangesDelta->ftl_cmd_cnt =
+					ftl_cmd_cnt;
+				p_BTableChangesDelta->WC_Index = wWearIndex -
+					DeviceInfo.wSpectraStartBlock;
+				p_BTableChangesDelta->WC_Entry_Value =
+					g_pWearCounter[wWearIndex -
+					DeviceInfo.wSpectraStartBlock];
+				p_BTableChangesDelta->ValidFields = 0x30;
+#endif
+			}
+	}
+
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Write_IN_Progress_Block_Table_Page
+* Inputs:       None
+* Outputs:      None
+* Description:  It writes in-progress flag page to the page next to
+*               block table
+***********************************************************************/
+static int FTL_Write_IN_Progress_Block_Table_Page(void)
+{
+	int wResult = PASS;
+	u16 bt_pages;
+	u16 dwIPFPageAddr;
+#if CMD_DMA
+#else
+	u32 *pbt = (u32 *)g_pBlockTable;
+	u32 wTempBlockTableIndex;
+#endif
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+	bt_pages = FTL_Get_Block_Table_Flash_Size_Pages();
+
+	dwIPFPageAddr = g_wBlockTableOffset + bt_pages;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Writing IPF at "
+			       "Block %d Page %d\n",
+			       g_wBlockTableIndex, dwIPFPageAddr);
+
+#if CMD_DMA
+	wResult = GLOB_LLD_Write_Page_Main_Spare_cdma(g_pIPF,
+		g_wBlockTableIndex, dwIPFPageAddr, 1,
+		LLD_CMD_FLAG_MODE_CDMA | LLD_CMD_FLAG_ORDER_BEFORE_REST);
+	if (wResult == FAIL) {
+		nand_dbg_print(NAND_DBG_WARN,
+			       "NAND Program fail in %s, Line %d, "
+			       "Function: %s, new Bad Block %d generated!\n",
+			       __FILE__, __LINE__, __func__,
+			       g_wBlockTableIndex);
+	}
+	g_wBlockTableOffset = dwIPFPageAddr + 1;
+	p_BTableChangesDelta = (struct BTableChangesDelta *)g_pBTDelta_Free;
+	g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+	p_BTableChangesDelta->ftl_cmd_cnt = ftl_cmd_cnt;
+	p_BTableChangesDelta->g_wBlockTableOffset = g_wBlockTableOffset;
+	p_BTableChangesDelta->ValidFields = 0x01;
+	ftl_cmd_cnt++;
+#else
+	wResult = GLOB_LLD_Write_Page_Main_Spare(g_pIPF,
+		g_wBlockTableIndex, dwIPFPageAddr, 1);
+	if (wResult == FAIL) {
+		nand_dbg_print(NAND_DBG_WARN,
+			       "NAND Program fail in %s, Line %d, "
+			       "Function: %s, new Bad Block %d generated!\n",
+			       __FILE__, __LINE__, __func__,
+			       (int)g_wBlockTableIndex);
+		MARK_BLOCK_AS_BAD(pbt[BLOCK_TABLE_INDEX]);
+		wTempBlockTableIndex = FTL_Replace_Block_Table();
+		bt_block_changed = 1;
+		if (BAD_BLOCK == wTempBlockTableIndex)
+			return ERR;
+		g_wBlockTableIndex = wTempBlockTableIndex;
+		g_wBlockTableOffset = 0;
+		/* Block table tag is '00'. Means it's used one */
+		pbt[BLOCK_TABLE_INDEX] = g_wBlockTableIndex;
+		return FAIL;
+	}
+	g_wBlockTableOffset = dwIPFPageAddr + 1;
+#endif
+	return wResult;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     FTL_Read_Disturbance
+* Inputs:       block address
+* Outputs:      PASS=0 / FAIL=1
+* Description:  used to handle read disturbance. Data in block that
+*               reaches its read limit is moved to new block
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int FTL_Read_Disturbance(u32 blk_addr)
+{
+	int wResult = FAIL;
+	u32 *pbt = (u32 *) g_pBlockTable;
+	u32 dwOldBlockAddr = blk_addr;
+	u32 wBlockNum;
+	u32 i;
+	u32 wLeastReadCounter = 0xFFFF;
+	u32 wLeastReadIndex = BAD_BLOCK;
+	u32 wSpareBlockNum = 0;
+	u32 wTempNode;
+	u32 wReplacedNode;
+	u8 *g_pTempBuf;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+			       __FILE__, __LINE__, __func__);
+
+#if CMD_DMA
+	g_pTempBuf = cp_back_buf_copies[cp_back_buf_idx];
+	cp_back_buf_idx++;
+	if (cp_back_buf_idx > COPY_BACK_BUF_NUM) {
+		printk(KERN_ERR "cp_back_buf_copies overflow! Exit."
+		"Maybe too many pending commands in your CDMA chain.\n");
+		return FAIL;
+	}
+#else
+	g_pTempBuf = tmp_buf_read_disturbance;
+#endif
+
+	wBlockNum = FTL_Get_Block_Index(blk_addr);
+
+	do {
+		/* This is a bug.Here 'i' should be logical block number
+		 * and start from 1 (0 is reserved for block table).
+		 * Have fixed it.        - Yunpeng 2008. 12. 19
+		 */
+		for (i = 1; i < DeviceInfo.wDataBlockNum; i++) {
+			if (IS_SPARE_BLOCK(i)) {
+				u32 wPhysicalIndex =
+					(u32)((~SPARE_BLOCK) & pbt[i]);
+				if (g_pReadCounter[wPhysicalIndex -
+					DeviceInfo.wSpectraStartBlock] <
+					wLeastReadCounter) {
+					wLeastReadCounter =
+						g_pReadCounter[wPhysicalIndex -
+						DeviceInfo.wSpectraStartBlock];
+					wLeastReadIndex = i;
+				}
+				wSpareBlockNum++;
+			}
+		}
+
+		if (wSpareBlockNum <= NUM_FREE_BLOCKS_GATE) {
+			wResult = GLOB_FTL_Garbage_Collection();
+			if (PASS == wResult)
+				continue;
+			else
+				break;
+		} else {
+			wTempNode = (u32)(DISCARD_BLOCK | pbt[wBlockNum]);
+			wReplacedNode = (u32)((~SPARE_BLOCK) &
+					pbt[wLeastReadIndex]);
+#if CMD_DMA
+			pbt[wBlockNum] = wReplacedNode;
+			pbt[wLeastReadIndex] = wTempNode;
+			p_BTableChangesDelta =
+				(struct BTableChangesDelta *)g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+					ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index = wBlockNum;
+			p_BTableChangesDelta->BT_Entry_Value = pbt[wBlockNum];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+
+			p_BTableChangesDelta =
+				(struct BTableChangesDelta *)g_pBTDelta_Free;
+			g_pBTDelta_Free += sizeof(struct BTableChangesDelta);
+
+			p_BTableChangesDelta->ftl_cmd_cnt =
+					ftl_cmd_cnt;
+			p_BTableChangesDelta->BT_Index = wLeastReadIndex;
+			p_BTableChangesDelta->BT_Entry_Value =
+					pbt[wLeastReadIndex];
+			p_BTableChangesDelta->ValidFields = 0x0C;
+
+			wResult = GLOB_LLD_Read_Page_Main_cdma(g_pTempBuf,
+				dwOldBlockAddr, 0, DeviceInfo.wPagesPerBlock,
+				LLD_CMD_FLAG_MODE_CDMA);
+			if (wResult == FAIL)
+				return wResult;
+
+			ftl_cmd_cnt++;
+
+			if (wResult != FAIL) {
+				if (FAIL == GLOB_LLD_Write_Page_Main_cdma(
+					g_pTempBuf, pbt[wBlockNum], 0,
+					DeviceInfo.wPagesPerBlock)) {
+					nand_dbg_print(NAND_DBG_WARN,
+						"NAND Program fail in "
+						"%s, Line %d, Function: %s, "
+						"new Bad Block %d "
+						"generated!\n",
+						__FILE__, __LINE__, __func__,
+						(int)pbt[wBlockNum]);
+					wResult = FAIL;
+					MARK_BLOCK_AS_BAD(pbt[wBlockNum]);
+				}
+				ftl_cmd_cnt++;
+			}
+#else
+			wResult = GLOB_LLD_Read_Page_Main(g_pTempBuf,
+				dwOldBlockAddr, 0, DeviceInfo.wPagesPerBlock);
+			if (wResult == FAIL)
+				return wResult;
+
+			if (wResult != FAIL) {
+				/* This is a bug. At this time, pbt[wBlockNum]
+				is still the physical address of
+				discard block, and should not be write.
+				Have fixed it as below.
+					-- Yunpeng 2008.12.19
+				*/
+				wResult = GLOB_LLD_Write_Page_Main(g_pTempBuf,
+					wReplacedNode, 0,
+					DeviceInfo.wPagesPerBlock);
+				if (wResult == FAIL) {
+					nand_dbg_print(NAND_DBG_WARN,
+						"NAND Program fail in "
+						"%s, Line %d, Function: %s, "
+						"new Bad Block %d "
+						"generated!\n",
+						__FILE__, __LINE__, __func__,
+						(int)wReplacedNode);
+					MARK_BLOCK_AS_BAD(wReplacedNode);
+				} else {
+					pbt[wBlockNum] = wReplacedNode;
+					pbt[wLeastReadIndex] = wTempNode;
+				}
+			}
+
+			if ((wResult == PASS) && (g_cBlockTableStatus !=
+				IN_PROGRESS_BLOCK_TABLE)) {
+				g_cBlockTableStatus = IN_PROGRESS_BLOCK_TABLE;
+				FTL_Write_IN_Progress_Block_Table_Page();
+			}
+#endif
+		}
+	} while (wResult != PASS)
+	;
+
+#if CMD_DMA
+	/* ... */
+#endif
+
+	return wResult;
+}
+
diff --git a/drivers/staging/spectra/flash.h b/drivers/staging/spectra/flash.h
new file mode 100644
index 00000000000..5ed05805cf6
--- /dev/null
+++ b/drivers/staging/spectra/flash.h
@@ -0,0 +1,198 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _FLASH_INTERFACE_
+#define _FLASH_INTERFACE_
+
+#include "ffsport.h"
+#include "spectraswconfig.h"
+
+#define MAX_BYTE_VALUE        0xFF
+#define MAX_WORD_VALUE        0xFFFF
+#define MAX_U32_VALUE        0xFFFFFFFF
+
+#define MAX_BLOCKNODE_VALUE     0xFFFFFF
+#define DISCARD_BLOCK           0x800000
+#define SPARE_BLOCK             0x400000
+#define BAD_BLOCK               0xC00000
+
+#define UNHIT_CACHE_ITEM         0xFFFF
+
+#define NAND_CACHE_INIT_ADDR    0xffffffffffffffffULL
+
+#define IN_PROGRESS_BLOCK_TABLE   0x00
+#define CURRENT_BLOCK_TABLE       0x01
+
+#define BTSIG_OFFSET   (0)
+#define BTSIG_BYTES    (5)
+#define BTSIG_DELTA    (3)
+
+#define MAX_READ_COUNTER  0x2710
+
+#define FIRST_BT_ID		(1)
+#define LAST_BT_ID    (254)
+#define BTBLOCK_INVAL  (u32)(0xFFFFFFFF)
+
+struct device_info_tag {
+	u16 wDeviceMaker;
+	u16 wDeviceID;
+	u32 wDeviceType;
+	u32 wSpectraStartBlock;
+	u32 wSpectraEndBlock;
+	u32 wTotalBlocks;
+	u16 wPagesPerBlock;
+	u16 wPageSize;
+	u16 wPageDataSize;
+	u16 wPageSpareSize;
+	u16 wNumPageSpareFlag;
+	u16 wECCBytesPerSector;
+	u32 wBlockSize;
+	u32 wBlockDataSize;
+	u32 wDataBlockNum;
+	u8 bPlaneNum;
+	u16 wDeviceMainAreaSize;
+	u16 wDeviceSpareAreaSize;
+	u16 wDevicesConnected;
+	u16 wDeviceWidth;
+	u16 wHWRevision;
+	u16 wHWFeatures;
+
+	u16 wONFIDevFeatures;
+	u16 wONFIOptCommands;
+	u16 wONFITimingMode;
+	u16 wONFIPgmCacheTimingMode;
+
+	u16 MLCDevice;
+	u16 wSpareSkipBytes;
+
+	u8 nBitsInPageNumber;
+	u8 nBitsInPageDataSize;
+	u8 nBitsInBlockDataSize;
+};
+
+extern struct device_info_tag DeviceInfo;
+
+/* Cache item format */
+struct flash_cache_item_tag {
+	u64 address;
+	u16 use_cnt;
+	u16 changed;
+	u8 *buf;
+};
+
+struct flash_cache_tag {
+	u32 cache_item_size; /* Size in bytes of each cache item */
+	u16 pages_per_item; /* How many NAND pages in each cache item */
+	u16 LRU; /* No. of the least recently used cache item */
+	struct flash_cache_item_tag array[CACHE_ITEM_NUM];
+};
+
+/*
+ *Data structure for each list node of the managment table
+ * used for the Level 2 Cache. Each node maps one logical NAND block.
+ */
+struct spectra_l2_cache_list {
+	struct list_head list;
+	u32 logical_blk_num; /* Logical block number */
+	u32 pages_array[]; /* Page map array of this logical block.
+			   * Array index is the logical block number,
+			   * and for every item of this arry:
+			   * high 16 bit is index of the L2 cache block num,
+			   * low 16 bit is the phy page num
+			   * of the above L2 cache block.
+			   * This array will be kmalloc during run time.
+			   */
+};
+
+struct spectra_l2_cache_info {
+	u32 blk_array[BLK_NUM_FOR_L2_CACHE];
+	u16 cur_blk_idx; /* idx to the phy block number of current using */
+	u16 cur_page_num; /* pages number of current using */
+	struct spectra_l2_cache_list table; /* First node of the table */
+};
+
+#define RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE    1
+
+#if RESTORE_CACHE_ON_CDMA_CHAIN_FAILURE
+struct flash_cache_mod_item_tag {
+	u64 address;
+	u8 changed;
+};
+
+struct flash_cache_delta_list_tag {
+	u8 item;  /* used cache item */
+	struct flash_cache_mod_item_tag cache;
+};
+#endif
+
+extern struct flash_cache_tag Cache;
+
+extern u8 *buf_read_page_main_spare;
+extern u8 *buf_write_page_main_spare;
+extern u8 *buf_read_page_spare;
+extern u8 *buf_get_bad_block;
+extern u8 *cdma_desc_buf;
+extern u8 *memcp_desc_buf;
+
+/* struture used for IndentfyDevice function */
+struct spectra_indentfy_dev_tag {
+	u32 NumBlocks;
+	u16 PagesPerBlock;
+	u16 PageDataSize;
+	u16 wECCBytesPerSector;
+	u32 wDataBlockNum;
+};
+
+int GLOB_FTL_Flash_Init(void);
+int GLOB_FTL_Flash_Release(void);
+/*void GLOB_FTL_Erase_Flash(void);*/
+int GLOB_FTL_Block_Erase(u64 block_addr);
+int GLOB_FTL_Is_BadBlock(u32 block_num);
+int GLOB_FTL_IdentifyDevice(struct spectra_indentfy_dev_tag *dev_data);
+int GLOB_FTL_Event_Status(int *);
+u16 glob_ftl_execute_cmds(void);
+
+/*int FTL_Read_Disturbance(ADDRESSTYPE dwBlockAddr);*/
+int FTL_Read_Disturbance(u32 dwBlockAddr);
+
+/*Flash r/w based on cache*/
+int GLOB_FTL_Page_Read(u8 *read_data, u64 page_addr);
+int GLOB_FTL_Page_Write(u8 *write_data, u64 page_addr);
+int GLOB_FTL_Wear_Leveling(void);
+int GLOB_FTL_Flash_Format(void);
+int GLOB_FTL_Init(void);
+int GLOB_FTL_Flush_Cache(void);
+int GLOB_FTL_Garbage_Collection(void);
+int GLOB_FTL_BT_Garbage_Collection(void);
+void GLOB_FTL_Cache_Release(void);
+u8 *get_blk_table_start_addr(void);
+u8 *get_wear_leveling_table_start_addr(void);
+unsigned long get_blk_table_len(void);
+unsigned long get_wear_leveling_table_len(void);
+
+#if DEBUG_BNDRY
+void debug_boundary_lineno_error(int chnl, int limit, int no, int lineno,
+				char *filename);
+#define debug_boundary_error(chnl, limit, no) debug_boundary_lineno_error(chnl,\
+						limit, no, __LINE__, __FILE__)
+#else
+#define debug_boundary_error(chnl, limit, no) ;
+#endif
+
+#endif /*_FLASH_INTERFACE_*/
diff --git a/drivers/staging/spectra/lld.c b/drivers/staging/spectra/lld.c
new file mode 100644
index 00000000000..5c3b9762dc3
--- /dev/null
+++ b/drivers/staging/spectra/lld.c
@@ -0,0 +1,339 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include "spectraswconfig.h"
+#include "ffsport.h"
+#include "ffsdefs.h"
+#include "lld.h"
+#include "lld_nand.h"
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+#if FLASH_EMU		/* vector all the LLD calls to the LLD_EMU code */
+#include "lld_emu.h"
+#include "lld_cdma.h"
+
+/* common functions: */
+u16 GLOB_LLD_Flash_Reset(void)
+{
+	return emu_Flash_Reset();
+}
+
+u16 GLOB_LLD_Read_Device_ID(void)
+{
+	return emu_Read_Device_ID();
+}
+
+int GLOB_LLD_Flash_Release(void)
+{
+	return emu_Flash_Release();
+}
+
+u16 GLOB_LLD_Flash_Init(void)
+{
+	return emu_Flash_Init();
+}
+
+u16 GLOB_LLD_Erase_Block(u32 block_add)
+{
+	return emu_Erase_Block(block_add);
+}
+
+u16 GLOB_LLD_Write_Page_Main(u8 *write_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return emu_Write_Page_Main(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main(u8 *read_data, u32 block, u16 Page,
+			       u16 PageCount)
+{
+	return emu_Read_Page_Main(read_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Polling(u8 *read_data,
+			u32 block, u16 page, u16 page_count)
+{
+	return emu_Read_Page_Main(read_data, block, page, page_count);
+}
+
+u16 GLOB_LLD_Write_Page_Main_Spare(u8 *write_data, u32 block,
+				      u16 Page, u16 PageCount)
+{
+	return emu_Write_Page_Main_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Spare(u8 *read_data, u32 block,
+				     u16 Page, u16 PageCount)
+{
+	return emu_Read_Page_Main_Spare(read_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Write_Page_Spare(u8 *write_data, u32 block, u16 Page,
+				 u16 PageCount)
+{
+	return emu_Write_Page_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Spare(u8 *read_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return emu_Read_Page_Spare(read_data, block, Page, PageCount);
+}
+
+u16  GLOB_LLD_Get_Bad_Block(u32 block)
+{
+    return  emu_Get_Bad_Block(block);
+}
+
+#endif /* FLASH_EMU */
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+#if FLASH_MTD		/* vector all the LLD calls to the LLD_MTD code */
+#include "lld_mtd.h"
+#include "lld_cdma.h"
+
+/* common functions: */
+u16 GLOB_LLD_Flash_Reset(void)
+{
+	return mtd_Flash_Reset();
+}
+
+u16 GLOB_LLD_Read_Device_ID(void)
+{
+	return mtd_Read_Device_ID();
+}
+
+int GLOB_LLD_Flash_Release(void)
+{
+	return mtd_Flash_Release();
+}
+
+u16 GLOB_LLD_Flash_Init(void)
+{
+	return mtd_Flash_Init();
+}
+
+u16 GLOB_LLD_Erase_Block(u32 block_add)
+{
+	return mtd_Erase_Block(block_add);
+}
+
+u16 GLOB_LLD_Write_Page_Main(u8 *write_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return mtd_Write_Page_Main(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main(u8 *read_data, u32 block, u16 Page,
+			       u16 PageCount)
+{
+	return mtd_Read_Page_Main(read_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Polling(u8 *read_data,
+			u32 block, u16 page, u16 page_count)
+{
+	return mtd_Read_Page_Main(read_data, block, page, page_count);
+}
+
+u16 GLOB_LLD_Write_Page_Main_Spare(u8 *write_data, u32 block,
+				      u16 Page, u16 PageCount)
+{
+	return mtd_Write_Page_Main_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Spare(u8 *read_data, u32 block,
+				     u16 Page, u16 PageCount)
+{
+	return mtd_Read_Page_Main_Spare(read_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Write_Page_Spare(u8 *write_data, u32 block, u16 Page,
+				 u16 PageCount)
+{
+	return mtd_Write_Page_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Spare(u8 *read_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return mtd_Read_Page_Spare(read_data, block, Page, PageCount);
+}
+
+u16  GLOB_LLD_Get_Bad_Block(u32 block)
+{
+    return  mtd_Get_Bad_Block(block);
+}
+
+#endif /* FLASH_MTD */
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+#if FLASH_NAND	/* vector all the LLD calls to the NAND controller code */
+#include "lld_nand.h"
+#include "lld_cdma.h"
+#include "flash.h"
+
+/* common functions for LLD_NAND */
+void GLOB_LLD_ECC_Control(int enable)
+{
+	NAND_ECC_Ctrl(enable);
+}
+
+/* common functions for LLD_NAND */
+u16 GLOB_LLD_Flash_Reset(void)
+{
+	return NAND_Flash_Reset();
+}
+
+u16 GLOB_LLD_Read_Device_ID(void)
+{
+	return NAND_Read_Device_ID();
+}
+
+u16 GLOB_LLD_UnlockArrayAll(void)
+{
+	return NAND_UnlockArrayAll();
+}
+
+u16 GLOB_LLD_Flash_Init(void)
+{
+	return NAND_Flash_Init();
+}
+
+int GLOB_LLD_Flash_Release(void)
+{
+	return nand_release_spectra();
+}
+
+u16 GLOB_LLD_Erase_Block(u32 block_add)
+{
+	return NAND_Erase_Block(block_add);
+}
+
+
+u16 GLOB_LLD_Write_Page_Main(u8 *write_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return NAND_Write_Page_Main(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main(u8 *read_data, u32 block, u16 page,
+			       u16 page_count)
+{
+	if (page_count == 1) /* Using polling to improve read speed */
+		return NAND_Read_Page_Main_Polling(read_data, block, page, 1);
+	else
+		return NAND_Read_Page_Main(read_data, block, page, page_count);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Polling(u8 *read_data,
+			u32 block, u16 page, u16 page_count)
+{
+	return NAND_Read_Page_Main_Polling(read_data,
+			block, page, page_count);
+}
+
+u16 GLOB_LLD_Write_Page_Main_Spare(u8 *write_data, u32 block,
+				      u16 Page, u16 PageCount)
+{
+	return NAND_Write_Page_Main_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Write_Page_Spare(u8 *write_data, u32 block, u16 Page,
+				 u16 PageCount)
+{
+	return NAND_Write_Page_Spare(write_data, block, Page, PageCount);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Spare(u8 *read_data, u32 block,
+				     u16 page, u16 page_count)
+{
+	return NAND_Read_Page_Main_Spare(read_data, block, page, page_count);
+}
+
+u16 GLOB_LLD_Read_Page_Spare(u8 *read_data, u32 block, u16 Page,
+				u16 PageCount)
+{
+	return NAND_Read_Page_Spare(read_data, block, Page, PageCount);
+}
+
+u16  GLOB_LLD_Get_Bad_Block(u32 block)
+{
+	return  NAND_Get_Bad_Block(block);
+}
+
+#if CMD_DMA
+u16 GLOB_LLD_Event_Status(void)
+{
+	return CDMA_Event_Status();
+}
+
+u16 glob_lld_execute_cmds(void)
+{
+	return CDMA_Execute_CMDs();
+}
+
+u16 GLOB_LLD_MemCopy_CMD(u8 *dest, u8 *src,
+			u32 ByteCount, u16 flag)
+{
+	/* Replace the hardware memcopy with software memcpy function */
+	if (CDMA_Execute_CMDs())
+		return FAIL;
+	memcpy(dest, src, ByteCount);
+	return PASS;
+
+	/* return CDMA_MemCopy_CMD(dest, src, ByteCount, flag); */
+}
+
+u16 GLOB_LLD_Erase_Block_cdma(u32 block, u16 flags)
+{
+	return CDMA_Data_CMD(ERASE_CMD, 0, block, 0, 0, flags);
+}
+
+u16 GLOB_LLD_Write_Page_Main_cdma(u8 *data, u32 block, u16 page, u16 count)
+{
+	return CDMA_Data_CMD(WRITE_MAIN_CMD, data, block, page, count, 0);
+}
+
+u16 GLOB_LLD_Read_Page_Main_cdma(u8 *data, u32 block, u16 page,
+				u16 count, u16 flags)
+{
+	return CDMA_Data_CMD(READ_MAIN_CMD, data, block, page, count, flags);
+}
+
+u16 GLOB_LLD_Write_Page_Main_Spare_cdma(u8 *data, u32 block, u16 page,
+					u16 count, u16 flags)
+{
+	return CDMA_Data_CMD(WRITE_MAIN_SPARE_CMD,
+			data, block, page, count, flags);
+}
+
+u16 GLOB_LLD_Read_Page_Main_Spare_cdma(u8 *data,
+				u32 block, u16 page, u16 count)
+{
+	return CDMA_Data_CMD(READ_MAIN_SPARE_CMD, data, block, page, count,
+			LLD_CMD_FLAG_MODE_CDMA);
+}
+
+#endif /* CMD_DMA */
+#endif /* FLASH_NAND */
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+
+/* end of LLD.c */
diff --git a/drivers/staging/spectra/lld.h b/drivers/staging/spectra/lld.h
new file mode 100644
index 00000000000..d3738e0e1fe
--- /dev/null
+++ b/drivers/staging/spectra/lld.h
@@ -0,0 +1,111 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+
+
+#ifndef _LLD_
+#define _LLD_
+
+#include "ffsport.h"
+#include "spectraswconfig.h"
+#include "flash.h"
+
+#define GOOD_BLOCK 0
+#define DEFECTIVE_BLOCK 1
+#define READ_ERROR 2
+
+#define CLK_X  5
+#define CLK_MULTI 4
+
+/* Typedefs */
+
+/*  prototypes: API for LLD */
+/* Currently, Write_Page_Main
+ * 			  MemCopy
+ * 			  Read_Page_Main_Spare
+ * do not have flag because they were not implemented prior to this
+ * They are not being added to keep changes to a minimum for now.
+ * Currently, they are not required (only reqd for Wr_P_M_S.)
+ * Later on, these NEED to be changed.
+ */
+
+extern void GLOB_LLD_ECC_Control(int enable);
+
+extern u16 GLOB_LLD_Flash_Reset(void);
+
+extern u16 GLOB_LLD_Read_Device_ID(void);
+
+extern u16 GLOB_LLD_UnlockArrayAll(void);
+
+extern u16 GLOB_LLD_Flash_Init(void);
+
+extern int GLOB_LLD_Flash_Release(void);
+
+extern u16 GLOB_LLD_Erase_Block(u32 block_add);
+
+extern u16 GLOB_LLD_Write_Page_Main(u8 *write_data,
+	u32 block, u16 Page, u16 PageCount);
+
+extern u16 GLOB_LLD_Read_Page_Main(u8 *read_data,
+	u32 block, u16 page, u16 page_count);
+
+extern u16 GLOB_LLD_Read_Page_Main_Polling(u8 *read_data,
+	u32 block, u16 page, u16 page_count);
+
+extern u16 GLOB_LLD_Write_Page_Main_Spare(u8 *write_data,
+	u32 block, u16 Page, u16 PageCount);
+
+extern u16 GLOB_LLD_Write_Page_Spare(u8 *write_data,
+	u32 block, u16 Page, u16 PageCount);
+
+extern u16 GLOB_LLD_Read_Page_Main_Spare(u8 *read_data,
+	u32 block, u16 page, u16 page_count);
+
+extern u16 GLOB_LLD_Read_Page_Spare(u8 *read_data,
+	u32 block, u16 Page, u16 PageCount);
+
+extern u16  GLOB_LLD_Get_Bad_Block(u32 block);
+
+extern u16 GLOB_LLD_Event_Status(void);
+
+extern u16 GLOB_LLD_MemCopy_CMD(u8 *dest, u8 *src, u32 ByteCount, u16 flag);
+
+extern u16 glob_lld_execute_cmds(void);
+
+extern u16 GLOB_LLD_Erase_Block_cdma(u32 block, u16 flags);
+
+extern u16 GLOB_LLD_Write_Page_Main_cdma(u8 *data,
+	u32 block, u16 page, u16 count);
+
+extern u16 GLOB_LLD_Read_Page_Main_cdma(u8 *data,
+	u32 block, u16 page, u16 count, u16 flags);
+
+extern u16 GLOB_LLD_Write_Page_Main_Spare_cdma(u8 *data,
+	u32 block, u16 page, u16 count, u16 flags);
+
+extern u16 GLOB_LLD_Read_Page_Main_Spare_cdma(u8 *data,
+	u32 block, u16 page, u16 count);
+
+#define LLD_CMD_FLAG_ORDER_BEFORE_REST		(0x1)
+#define LLD_CMD_FLAG_MODE_CDMA			(0x8)
+
+
+#endif /*_LLD_ */
+
+
diff --git a/drivers/staging/spectra/lld_cdma.c b/drivers/staging/spectra/lld_cdma.c
new file mode 100644
index 00000000000..c6e76103d43
--- /dev/null
+++ b/drivers/staging/spectra/lld_cdma.c
@@ -0,0 +1,910 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+
+#include "spectraswconfig.h"
+#include "lld.h"
+#include "lld_nand.h"
+#include "lld_cdma.h"
+#include "lld_emu.h"
+#include "flash.h"
+#include "nand_regs.h"
+
+#define MAX_PENDING_CMDS    4
+#define MODE_02             (0x2 << 26)
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_Data_Cmd
+* Inputs:   cmd code (aligned for hw)
+*               data: pointer to source or destination
+*               block: block address
+*               page: page address
+*               num: num pages to transfer
+* Outputs:      PASS
+* Description:  This function takes the parameters and puts them
+*                   into the "pending commands" array.
+*               It does not parse or validate the parameters.
+*               The array index is same as the tag.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 CDMA_Data_CMD(u8 cmd, u8 *data, u32 block, u16 page, u16 num, u16 flags)
+{
+	u8 bank;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (0 == cmd)
+		nand_dbg_print(NAND_DBG_DEBUG,
+		"%s, Line %d, Illegal cmd (0)\n", __FILE__, __LINE__);
+
+	/* If a command of another bank comes, then first execute */
+	/* pending commands of the current bank, then set the new */
+	/* bank as current bank */
+	bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+	if (bank != info.flash_bank) {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Will access new bank. old bank: %d, new bank: %d\n",
+			info.flash_bank, bank);
+		if (CDMA_Execute_CMDs()) {
+			printk(KERN_ERR "CDMA_Execute_CMDs fail!\n");
+			return FAIL;
+		}
+		info.flash_bank = bank;
+	}
+
+	info.pcmds[info.pcmds_num].CMD = cmd;
+	info.pcmds[info.pcmds_num].DataAddr = data;
+	info.pcmds[info.pcmds_num].Block = block;
+	info.pcmds[info.pcmds_num].Page = page;
+	info.pcmds[info.pcmds_num].PageCount = num;
+	info.pcmds[info.pcmds_num].DataDestAddr = 0;
+	info.pcmds[info.pcmds_num].DataSrcAddr = 0;
+	info.pcmds[info.pcmds_num].MemCopyByteCnt = 0;
+	info.pcmds[info.pcmds_num].Flags = flags;
+	info.pcmds[info.pcmds_num].Status = 0xB0B;
+
+	switch (cmd) {
+	case WRITE_MAIN_SPARE_CMD:
+		Conv_Main_Spare_Data_Log2Phy_Format(data, num);
+		break;
+	case WRITE_SPARE_CMD:
+		Conv_Spare_Data_Log2Phy_Format(data);
+		break;
+	default:
+		break;
+	}
+
+	info.pcmds_num++;
+
+	if (info.pcmds_num >= MAX_PENDING_CMDS) {
+		if (CDMA_Execute_CMDs()) {
+			printk(KERN_ERR "CDMA_Execute_CMDs fail!\n");
+			return FAIL;
+		}
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_MemCopy_CMD
+* Inputs:       dest: pointer to destination
+*               src:  pointer to source
+*               count: num bytes to transfer
+* Outputs:      PASS
+* Description:  This function takes the parameters and puts them
+*                   into the "pending commands" array.
+*               It does not parse or validate the parameters.
+*               The array index is same as the tag.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 CDMA_MemCopy_CMD(u8 *dest, u8 *src, u32 byte_cnt, u16 flags)
+{
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	info.pcmds[info.pcmds_num].CMD = MEMCOPY_CMD;
+	info.pcmds[info.pcmds_num].DataAddr = 0;
+	info.pcmds[info.pcmds_num].Block = 0;
+	info.pcmds[info.pcmds_num].Page = 0;
+	info.pcmds[info.pcmds_num].PageCount = 0;
+	info.pcmds[info.pcmds_num].DataDestAddr = dest;
+	info.pcmds[info.pcmds_num].DataSrcAddr = src;
+	info.pcmds[info.pcmds_num].MemCopyByteCnt = byte_cnt;
+	info.pcmds[info.pcmds_num].Flags = flags;
+	info.pcmds[info.pcmds_num].Status = 0xB0B;
+
+	info.pcmds_num++;
+
+	if (info.pcmds_num >= MAX_PENDING_CMDS) {
+		if (CDMA_Execute_CMDs()) {
+			printk(KERN_ERR "CDMA_Execute_CMDs fail!\n");
+			return FAIL;
+		}
+	}
+
+	return PASS;
+}
+
+#if 0
+/* Prints the PendingCMDs array */
+void print_pending_cmds(void)
+{
+	u16 i;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < info.pcmds_num; i++) {
+		nand_dbg_print(NAND_DBG_DEBUG, "\ni: %d\n", i);
+		switch (info.pcmds[i].CMD) {
+		case ERASE_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Erase Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case WRITE_MAIN_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Write Main Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case WRITE_MAIN_SPARE_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Write Main Spare Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case READ_MAIN_SPARE_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Read Main Spare Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case READ_MAIN_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Read Main Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case MEMCOPY_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Memcopy Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		case DUMMY_CMD:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Dummy Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		default:
+			nand_dbg_print(NAND_DBG_DEBUG,
+				"Illegal Command (0x%x)\n",
+				info.pcmds[i].CMD);
+			break;
+		}
+
+		nand_dbg_print(NAND_DBG_DEBUG, "DataAddr: 0x%x\n",
+			(u32)info.pcmds[i].DataAddr);
+		nand_dbg_print(NAND_DBG_DEBUG, "Block: %d\n",
+			info.pcmds[i].Block);
+		nand_dbg_print(NAND_DBG_DEBUG, "Page: %d\n",
+			info.pcmds[i].Page);
+		nand_dbg_print(NAND_DBG_DEBUG, "PageCount: %d\n",
+			info.pcmds[i].PageCount);
+		nand_dbg_print(NAND_DBG_DEBUG, "DataDestAddr: 0x%x\n",
+			(u32)info.pcmds[i].DataDestAddr);
+		nand_dbg_print(NAND_DBG_DEBUG, "DataSrcAddr: 0x%x\n",
+			(u32)info.pcmds[i].DataSrcAddr);
+		nand_dbg_print(NAND_DBG_DEBUG, "MemCopyByteCnt: %d\n",
+			info.pcmds[i].MemCopyByteCnt);
+		nand_dbg_print(NAND_DBG_DEBUG, "Flags: 0x%x\n",
+			info.pcmds[i].Flags);
+		nand_dbg_print(NAND_DBG_DEBUG, "Status: 0x%x\n",
+			info.pcmds[i].Status);
+	}
+}
+
+/* Print the CDMA descriptors */
+void print_cdma_descriptors(void)
+{
+	struct cdma_descriptor *pc;
+	int i;
+
+	pc = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "\nWill dump cdma descriptors:\n");
+
+	for (i = 0; i < info.cdma_num; i++) {
+		nand_dbg_print(NAND_DBG_DEBUG, "\ni: %d\n", i);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"NxtPointerHi: 0x%x, NxtPointerLo: 0x%x\n",
+			pc[i].NxtPointerHi, pc[i].NxtPointerLo);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"FlashPointerHi: 0x%x, FlashPointerLo: 0x%x\n",
+			pc[i].FlashPointerHi, pc[i].FlashPointerLo);
+		nand_dbg_print(NAND_DBG_DEBUG, "CommandType: 0x%x\n",
+			pc[i].CommandType);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"MemAddrHi: 0x%x, MemAddrLo: 0x%x\n",
+			pc[i].MemAddrHi, pc[i].MemAddrLo);
+		nand_dbg_print(NAND_DBG_DEBUG, "CommandFlags: 0x%x\n",
+			pc[i].CommandFlags);
+		nand_dbg_print(NAND_DBG_DEBUG, "Channel: %d, Status: 0x%x\n",
+			pc[i].Channel, pc[i].Status);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"MemCopyPointerHi: 0x%x, MemCopyPointerLo: 0x%x\n",
+			pc[i].MemCopyPointerHi, pc[i].MemCopyPointerLo);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Reserved12: 0x%x, Reserved13: 0x%x, "
+			"Reserved14: 0x%x, pcmd: %d\n",
+			pc[i].Reserved12, pc[i].Reserved13,
+			pc[i].Reserved14, pc[i].pcmd);
+	}
+}
+
+/* Print the Memory copy descriptors */
+static void print_memcp_descriptors(void)
+{
+	struct memcpy_descriptor *pm;
+	int i;
+
+	pm = (struct memcpy_descriptor *)info.memcp_desc_buf;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "\nWill dump mem_cpy descriptors:\n");
+
+	for (i = 0; i < info.cdma_num; i++) {
+		nand_dbg_print(NAND_DBG_DEBUG, "\ni: %d\n", i);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"NxtPointerHi: 0x%x, NxtPointerLo: 0x%x\n",
+			pm[i].NxtPointerHi, pm[i].NxtPointerLo);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"SrcAddrHi: 0x%x, SrcAddrLo: 0x%x\n",
+			pm[i].SrcAddrHi, pm[i].SrcAddrLo);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"DestAddrHi: 0x%x, DestAddrLo: 0x%x\n",
+			pm[i].DestAddrHi, pm[i].DestAddrLo);
+		nand_dbg_print(NAND_DBG_DEBUG, "XferSize: %d\n",
+			pm[i].XferSize);
+		nand_dbg_print(NAND_DBG_DEBUG, "MemCopyFlags: 0x%x\n",
+			pm[i].MemCopyFlags);
+		nand_dbg_print(NAND_DBG_DEBUG, "MemCopyStatus: %d\n",
+			pm[i].MemCopyStatus);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved9: 0x%x\n",
+			pm[i].reserved9);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved10: 0x%x\n",
+			pm[i].reserved10);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved11: 0x%x\n",
+			pm[i].reserved11);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved12: 0x%x\n",
+			pm[i].reserved12);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved13: 0x%x\n",
+			pm[i].reserved13);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved14: 0x%x\n",
+			pm[i].reserved14);
+		nand_dbg_print(NAND_DBG_DEBUG, "reserved15: 0x%x\n",
+			pm[i].reserved15);
+	}
+}
+#endif
+
+/* Reset cdma_descriptor chain to 0 */
+static void reset_cdma_desc(int i)
+{
+	struct cdma_descriptor *ptr;
+
+	BUG_ON(i >= MAX_DESCS);
+
+	ptr = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	ptr[i].NxtPointerHi = 0;
+	ptr[i].NxtPointerLo = 0;
+	ptr[i].FlashPointerHi = 0;
+	ptr[i].FlashPointerLo = 0;
+	ptr[i].CommandType = 0;
+	ptr[i].MemAddrHi = 0;
+	ptr[i].MemAddrLo = 0;
+	ptr[i].CommandFlags = 0;
+	ptr[i].Channel = 0;
+	ptr[i].Status = 0;
+	ptr[i].MemCopyPointerHi = 0;
+	ptr[i].MemCopyPointerLo = 0;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_UpdateEventStatus
+* Inputs:       none
+* Outputs:      none
+* Description:  This function update the event status of all the channels
+*               when an error condition is reported.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+void CDMA_UpdateEventStatus(void)
+{
+	int i, j, active_chan;
+	struct cdma_descriptor *ptr;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	ptr = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	for (j = 0; j < info.cdma_num; j++) {
+		/* Check for the descriptor with failure */
+		if ((ptr[j].Status & CMD_DMA_DESC_FAIL))
+			break;
+
+	}
+
+	/* All the previous cmd's status for this channel must be good */
+	for (i = 0; i < j; i++) {
+		if (ptr[i].pcmd != 0xff)
+			info.pcmds[ptr[i].pcmd].Status = CMD_PASS;
+	}
+
+	/* Abort the channel with type 0 reset command. It resets the */
+	/* selected channel after the descriptor completes the flash */
+	/* operation and status has been updated for the descriptor. */
+	/* Memory Copy and Sync associated with this descriptor will */
+	/* not be executed */
+	active_chan = ioread32(FlashReg + CHNL_ACTIVE);
+	if ((active_chan & (1 << info.flash_bank)) == (1 << info.flash_bank)) {
+		iowrite32(MODE_02 | (0 << 4), FlashMem); /* Type 0 reset */
+		iowrite32((0xF << 4) | info.flash_bank, FlashMem + 0x10);
+	} else { /* Should not reached here */
+		printk(KERN_ERR "Error! Used bank is not set in"
+			" reg CHNL_ACTIVE\n");
+	}
+}
+
+static void cdma_trans(u16 chan)
+{
+	u32 addr;
+
+	addr = info.cdma_desc;
+
+	iowrite32(MODE_10 | (chan << 24), FlashMem);
+	iowrite32((1 << 7) | chan, FlashMem + 0x10);
+
+	iowrite32(MODE_10 | (chan << 24) | ((0x0FFFF & (addr >> 16)) << 8),
+		FlashMem);
+	iowrite32((1 << 7) | (1 << 4) | 0, FlashMem + 0x10);
+
+	iowrite32(MODE_10 | (chan << 24) | ((0x0FFFF & addr) << 8), FlashMem);
+	iowrite32((1 << 7) | (1 << 5) | 0, FlashMem + 0x10);
+
+	iowrite32(MODE_10 | (chan << 24), FlashMem);
+	iowrite32((1 << 7) | (1 << 5) | (1 << 4) | 0, FlashMem + 0x10);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_Execute_CMDs (for use with CMD_DMA)
+* Inputs:       tag_count:  the number of pending cmds to do
+* Outputs:      PASS/FAIL
+* Description:  Build the SDMA chain(s) by making one CMD-DMA descriptor
+*               for each pending command, start the CDMA engine, and return.
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 CDMA_Execute_CMDs(void)
+{
+	int i, ret;
+	u64 flash_add;
+	u32 ptr;
+	dma_addr_t map_addr, next_ptr;
+	u16 status = PASS;
+	u16 tmp_c;
+	struct cdma_descriptor *pc;
+	struct memcpy_descriptor *pm;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	/* No pending cmds to execute, just exit */
+	if (0 == info.pcmds_num) {
+		nand_dbg_print(NAND_DBG_TRACE,
+			"No pending cmds to execute. Just exit.\n");
+		return PASS;
+	}
+
+	for (i = 0; i < MAX_DESCS; i++)
+		reset_cdma_desc(i);
+
+	pc = (struct cdma_descriptor *)info.cdma_desc_buf;
+	pm = (struct memcpy_descriptor *)info.memcp_desc_buf;
+
+	info.cdma_desc = virt_to_bus(info.cdma_desc_buf);
+	info.memcp_desc = virt_to_bus(info.memcp_desc_buf);
+	next_ptr = info.cdma_desc;
+	info.cdma_num = 0;
+
+	for (i = 0; i < info.pcmds_num; i++) {
+		if (info.pcmds[i].Block >= DeviceInfo.wTotalBlocks) {
+			info.pcmds[i].Status = CMD_NOT_DONE;
+			continue;
+		}
+
+		next_ptr += sizeof(struct cdma_descriptor);
+		pc[info.cdma_num].NxtPointerHi = next_ptr >> 16;
+		pc[info.cdma_num].NxtPointerLo = next_ptr & 0xffff;
+
+		/* Use the Block offset within a bank */
+		tmp_c = info.pcmds[i].Block /
+			(DeviceInfo.wTotalBlocks / totalUsedBanks);
+		flash_add = (u64)(info.pcmds[i].Block - tmp_c *
+			(DeviceInfo.wTotalBlocks / totalUsedBanks)) *
+			DeviceInfo.wBlockDataSize +
+			(u64)(info.pcmds[i].Page) *
+			DeviceInfo.wPageDataSize;
+
+		ptr = MODE_10 | (info.flash_bank << 24) |
+			(u32)GLOB_u64_Div(flash_add,
+				DeviceInfo.wPageDataSize);
+		pc[info.cdma_num].FlashPointerHi = ptr >> 16;
+		pc[info.cdma_num].FlashPointerLo = ptr & 0xffff;
+
+		if ((info.pcmds[i].CMD == WRITE_MAIN_SPARE_CMD) ||
+			(info.pcmds[i].CMD == READ_MAIN_SPARE_CMD)) {
+			/* Descriptor to set Main+Spare Access Mode */
+			pc[info.cdma_num].CommandType = 0x43;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			pc[info.cdma_num].MemAddrHi = 0;
+			pc[info.cdma_num].MemAddrLo = 0;
+			pc[info.cdma_num].Channel = 0;
+			pc[info.cdma_num].Status = 0;
+			pc[info.cdma_num].pcmd = i;
+
+			info.cdma_num++;
+			BUG_ON(info.cdma_num >= MAX_DESCS);
+
+			reset_cdma_desc(info.cdma_num);
+			next_ptr += sizeof(struct cdma_descriptor);
+			pc[info.cdma_num].NxtPointerHi = next_ptr >> 16;
+			pc[info.cdma_num].NxtPointerLo = next_ptr & 0xffff;
+			pc[info.cdma_num].FlashPointerHi = ptr >> 16;
+			pc[info.cdma_num].FlashPointerLo = ptr & 0xffff;
+		}
+
+		switch (info.pcmds[i].CMD) {
+		case ERASE_CMD:
+			pc[info.cdma_num].CommandType = 1;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			pc[info.cdma_num].MemAddrHi = 0;
+			pc[info.cdma_num].MemAddrLo = 0;
+			break;
+
+		case WRITE_MAIN_CMD:
+			pc[info.cdma_num].CommandType =
+				0x2100 | info.pcmds[i].PageCount;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			map_addr = virt_to_bus(info.pcmds[i].DataAddr);
+			pc[info.cdma_num].MemAddrHi = map_addr >> 16;
+			pc[info.cdma_num].MemAddrLo = map_addr & 0xffff;
+			break;
+
+		case READ_MAIN_CMD:
+			pc[info.cdma_num].CommandType =
+				0x2000 | info.pcmds[i].PageCount;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			map_addr = virt_to_bus(info.pcmds[i].DataAddr);
+			pc[info.cdma_num].MemAddrHi = map_addr >> 16;
+			pc[info.cdma_num].MemAddrLo = map_addr & 0xffff;
+			break;
+
+		case WRITE_MAIN_SPARE_CMD:
+			pc[info.cdma_num].CommandType =
+				0x2100 | info.pcmds[i].PageCount;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			map_addr = virt_to_bus(info.pcmds[i].DataAddr);
+			pc[info.cdma_num].MemAddrHi = map_addr >> 16;
+			pc[info.cdma_num].MemAddrLo = map_addr & 0xffff;
+			break;
+
+		case READ_MAIN_SPARE_CMD:
+			pc[info.cdma_num].CommandType =
+				0x2000 | info.pcmds[i].PageCount;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			map_addr = virt_to_bus(info.pcmds[i].DataAddr);
+			pc[info.cdma_num].MemAddrHi = map_addr >> 16;
+			pc[info.cdma_num].MemAddrLo = map_addr & 0xffff;
+			break;
+
+		case MEMCOPY_CMD:
+			pc[info.cdma_num].CommandType = 0xFFFF; /* NOP cmd */
+			/* Set bit 11 to let the CDMA engine continue to */
+			/* execute only after it has finished processing   */
+			/* the memcopy descriptor.                        */
+			/* Also set bit 10 and bit 9 to 1                  */
+			pc[info.cdma_num].CommandFlags = 0x0E40;
+			map_addr = info.memcp_desc + info.cdma_num *
+					sizeof(struct memcpy_descriptor);
+			pc[info.cdma_num].MemCopyPointerHi = map_addr >> 16;
+			pc[info.cdma_num].MemCopyPointerLo = map_addr & 0xffff;
+
+			pm[info.cdma_num].NxtPointerHi = 0;
+			pm[info.cdma_num].NxtPointerLo = 0;
+
+			map_addr = virt_to_bus(info.pcmds[i].DataSrcAddr);
+			pm[info.cdma_num].SrcAddrHi = map_addr >> 16;
+			pm[info.cdma_num].SrcAddrLo = map_addr & 0xffff;
+			map_addr = virt_to_bus(info.pcmds[i].DataDestAddr);
+			pm[info.cdma_num].DestAddrHi = map_addr >> 16;
+			pm[info.cdma_num].DestAddrLo = map_addr & 0xffff;
+
+			pm[info.cdma_num].XferSize =
+				info.pcmds[i].MemCopyByteCnt;
+			pm[info.cdma_num].MemCopyFlags =
+				(0 << 15 | 0 << 14 | 27 << 8 | 0x40);
+			pm[info.cdma_num].MemCopyStatus = 0;
+			break;
+
+		case DUMMY_CMD:
+		default:
+			pc[info.cdma_num].CommandType = 0XFFFF;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			pc[info.cdma_num].MemAddrHi = 0;
+			pc[info.cdma_num].MemAddrLo = 0;
+			break;
+		}
+
+		pc[info.cdma_num].Channel = 0;
+		pc[info.cdma_num].Status = 0;
+		pc[info.cdma_num].pcmd = i;
+
+		info.cdma_num++;
+		BUG_ON(info.cdma_num >= MAX_DESCS);
+
+		if ((info.pcmds[i].CMD == WRITE_MAIN_SPARE_CMD) ||
+			(info.pcmds[i].CMD == READ_MAIN_SPARE_CMD)) {
+			/* Descriptor to set back Main Area Access Mode */
+			reset_cdma_desc(info.cdma_num);
+			next_ptr += sizeof(struct cdma_descriptor);
+			pc[info.cdma_num].NxtPointerHi = next_ptr >> 16;
+			pc[info.cdma_num].NxtPointerLo = next_ptr & 0xffff;
+
+			pc[info.cdma_num].FlashPointerHi = ptr >> 16;
+			pc[info.cdma_num].FlashPointerLo = ptr & 0xffff;
+
+			pc[info.cdma_num].CommandType = 0x42;
+			pc[info.cdma_num].CommandFlags =
+				(0 << 10) | (1 << 9) | (0 << 8) | 0x40;
+			pc[info.cdma_num].MemAddrHi = 0;
+			pc[info.cdma_num].MemAddrLo = 0;
+
+			pc[info.cdma_num].Channel = 0;
+			pc[info.cdma_num].Status = 0;
+			pc[info.cdma_num].pcmd = i;
+
+			info.cdma_num++;
+			BUG_ON(info.cdma_num >= MAX_DESCS);
+		}
+	}
+
+	/* Add a dummy descriptor at end of the CDMA chain */
+	reset_cdma_desc(info.cdma_num);
+	ptr = MODE_10 | (info.flash_bank << 24);
+	pc[info.cdma_num].FlashPointerHi = ptr >> 16;
+	pc[info.cdma_num].FlashPointerLo = ptr & 0xffff;
+	pc[info.cdma_num].CommandType = 0xFFFF; /* NOP command */
+	/* Set Command Flags for the last CDMA descriptor: */
+	/* set Continue bit (bit 9) to 0 and Interrupt bit (bit 8) to 1 */
+	pc[info.cdma_num].CommandFlags =
+		(0 << 10) | (0 << 9) | (1 << 8) | 0x40;
+	pc[info.cdma_num].pcmd = 0xff; /* Set it to an illegal value */
+	info.cdma_num++;
+	BUG_ON(info.cdma_num >= MAX_DESCS);
+
+	iowrite32(1, FlashReg + GLOBAL_INT_ENABLE);  /* Enable Interrupt */
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	/* Wait for DMA to be enabled before issuing the next command */
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+	cdma_trans(info.flash_bank);
+
+	ret = wait_for_completion_timeout(&info.complete, 50 * HZ);
+	if (!ret)
+		printk(KERN_ERR "Wait for completion timeout "
+			"in %s, Line %d\n", __FILE__, __LINE__);
+	status = info.ret;
+
+	info.pcmds_num = 0; /* Clear the pending cmds number to 0 */
+
+	return status;
+}
+
+int is_cdma_interrupt(void)
+{
+	u32 ints_b0, ints_b1, ints_b2, ints_b3, ints_cdma;
+	u32 int_en_mask;
+	u32 cdma_int_en_mask;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	/* Set the global Enable masks for only those interrupts
+	 * that are supported */
+	cdma_int_en_mask = (DMA_INTR__DESC_COMP_CHANNEL0 |
+			DMA_INTR__DESC_COMP_CHANNEL1 |
+			DMA_INTR__DESC_COMP_CHANNEL2 |
+			DMA_INTR__DESC_COMP_CHANNEL3 |
+			DMA_INTR__MEMCOPY_DESC_COMP);
+
+	int_en_mask = (INTR_STATUS0__ECC_ERR |
+		INTR_STATUS0__PROGRAM_FAIL |
+		INTR_STATUS0__ERASE_FAIL);
+
+	ints_b0 = ioread32(FlashReg + INTR_STATUS0) & int_en_mask;
+	ints_b1 = ioread32(FlashReg + INTR_STATUS1) & int_en_mask;
+	ints_b2 = ioread32(FlashReg + INTR_STATUS2) & int_en_mask;
+	ints_b3 = ioread32(FlashReg + INTR_STATUS3) & int_en_mask;
+	ints_cdma = ioread32(FlashReg + DMA_INTR) & cdma_int_en_mask;
+
+	nand_dbg_print(NAND_DBG_WARN, "ints_bank0 to ints_bank3: "
+			"0x%x, 0x%x, 0x%x, 0x%x, ints_cdma: 0x%x\n",
+			ints_b0, ints_b1, ints_b2, ints_b3, ints_cdma);
+
+	if (ints_b0 || ints_b1 || ints_b2 || ints_b3 || ints_cdma) {
+		return 1;
+	} else {
+		iowrite32(ints_b0, FlashReg + INTR_STATUS0);
+		iowrite32(ints_b1, FlashReg + INTR_STATUS1);
+		iowrite32(ints_b2, FlashReg + INTR_STATUS2);
+		iowrite32(ints_b3, FlashReg + INTR_STATUS3);
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Not a NAND controller interrupt! Ignore it.\n");
+		return 0;
+	}
+}
+
+static void update_event_status(void)
+{
+	int i;
+	struct cdma_descriptor *ptr;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	ptr = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	for (i = 0; i < info.cdma_num; i++) {
+		if (ptr[i].pcmd != 0xff)
+			info.pcmds[ptr[i].pcmd].Status = CMD_PASS;
+		if ((ptr[i].CommandType == 0x41) ||
+			(ptr[i].CommandType == 0x42) ||
+			(ptr[i].CommandType == 0x43))
+			continue;
+
+		switch (info.pcmds[ptr[i].pcmd].CMD) {
+		case READ_MAIN_SPARE_CMD:
+			Conv_Main_Spare_Data_Phy2Log_Format(
+				info.pcmds[ptr[i].pcmd].DataAddr,
+				info.pcmds[ptr[i].pcmd].PageCount);
+			break;
+		case READ_SPARE_CMD:
+			Conv_Spare_Data_Phy2Log_Format(
+				info.pcmds[ptr[i].pcmd].DataAddr);
+			break;
+		}
+	}
+}
+
+static u16 do_ecc_for_desc(u32 ch, u8 *buf, u16 page)
+{
+	u16 event = EVENT_NONE;
+	u16 err_byte;
+	u16 err_page = 0;
+	u8 err_sector;
+	u8 err_device;
+	u16 ecc_correction_info;
+	u16 err_address;
+	u32 eccSectorSize;
+	u8 *err_pos;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+
+	do {
+		if (0 == ch)
+			err_page = ioread32(FlashReg + ERR_PAGE_ADDR0);
+		else if (1 == ch)
+			err_page = ioread32(FlashReg + ERR_PAGE_ADDR1);
+		else if (2 == ch)
+			err_page = ioread32(FlashReg + ERR_PAGE_ADDR2);
+		else if (3 == ch)
+			err_page = ioread32(FlashReg + ERR_PAGE_ADDR3);
+
+		err_address = ioread32(FlashReg + ECC_ERROR_ADDRESS);
+		err_byte = err_address & ECC_ERROR_ADDRESS__OFFSET;
+		err_sector = ((err_address &
+			ECC_ERROR_ADDRESS__SECTOR_NR) >> 12);
+
+		ecc_correction_info = ioread32(FlashReg + ERR_CORRECTION_INFO);
+		err_device = ((ecc_correction_info &
+			ERR_CORRECTION_INFO__DEVICE_NR) >> 8);
+
+		if (ecc_correction_info & ERR_CORRECTION_INFO__ERROR_TYPE) {
+			event = EVENT_UNCORRECTABLE_DATA_ERROR;
+		} else {
+			event = EVENT_CORRECTABLE_DATA_ERROR_FIXED;
+			if (err_byte < ECC_SECTOR_SIZE) {
+				err_pos = buf +
+					(err_page - page) *
+					DeviceInfo.wPageDataSize +
+					err_sector * eccSectorSize +
+					err_byte *
+					DeviceInfo.wDevicesConnected +
+					err_device;
+				*err_pos ^= ecc_correction_info &
+					ERR_CORRECTION_INFO__BYTEMASK;
+			}
+		}
+	} while (!(ecc_correction_info & ERR_CORRECTION_INFO__LAST_ERR_INFO));
+
+	return event;
+}
+
+static u16 process_ecc_int(u32 c, u16 *p_desc_num)
+{
+	struct cdma_descriptor *ptr;
+	u16 j;
+	int event = EVENT_PASS;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (c != info.flash_bank)
+		printk(KERN_ERR "Error!info.flash_bank is %d, while c is %d\n",
+				info.flash_bank, c);
+
+	ptr = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	for (j = 0; j < info.cdma_num; j++)
+		if ((ptr[j].Status & CMD_DMA_DESC_COMP) != CMD_DMA_DESC_COMP)
+			break;
+
+	*p_desc_num = j; /* Pass the descripter number found here */
+
+	if (j >= info.cdma_num) {
+		printk(KERN_ERR "Can not find the correct descriptor number "
+			"when ecc interrupt triggered!"
+			"info.cdma_num: %d, j: %d\n", info.cdma_num, j);
+		return EVENT_UNCORRECTABLE_DATA_ERROR;
+	}
+
+	event = do_ecc_for_desc(c, info.pcmds[ptr[j].pcmd].DataAddr,
+		info.pcmds[ptr[j].pcmd].Page);
+
+	if (EVENT_UNCORRECTABLE_DATA_ERROR == event) {
+		printk(KERN_ERR "Uncorrectable ECC error!"
+			"info.cdma_num: %d, j: %d, "
+			"pending cmd CMD: 0x%x, "
+			"Block: 0x%x, Page: 0x%x, PageCount: 0x%x\n",
+			info.cdma_num, j,
+			info.pcmds[ptr[j].pcmd].CMD,
+			info.pcmds[ptr[j].pcmd].Block,
+			info.pcmds[ptr[j].pcmd].Page,
+			info.pcmds[ptr[j].pcmd].PageCount);
+
+		if (ptr[j].pcmd != 0xff)
+			info.pcmds[ptr[j].pcmd].Status = CMD_FAIL;
+		CDMA_UpdateEventStatus();
+	}
+
+	return event;
+}
+
+static void process_prog_erase_fail_int(u16 desc_num)
+{
+	struct cdma_descriptor *ptr;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	ptr = (struct cdma_descriptor *)info.cdma_desc_buf;
+
+	if (ptr[desc_num].pcmd != 0xFF)
+		info.pcmds[ptr[desc_num].pcmd].Status = CMD_FAIL;
+
+	CDMA_UpdateEventStatus();
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_Event_Status (for use with CMD_DMA)
+* Inputs:       none
+* Outputs:      Event_Status code
+* Description:  This function is called after an interrupt has happened
+*               It reads the HW status register and ...tbd
+*               It returns the appropriate event status
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16  CDMA_Event_Status(void)
+{
+	u32 ints_addr[4] = {INTR_STATUS0, INTR_STATUS1,
+		INTR_STATUS2, INTR_STATUS3};
+	u32 dma_intr_bit[4] = {DMA_INTR__DESC_COMP_CHANNEL0,
+		DMA_INTR__DESC_COMP_CHANNEL1,
+		DMA_INTR__DESC_COMP_CHANNEL2,
+		DMA_INTR__DESC_COMP_CHANNEL3};
+	u32 cdma_int_status, int_status;
+	u32 ecc_enable = 0;
+	u16 event = EVENT_PASS;
+	u16 cur_desc = 0;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	ecc_enable = ioread32(FlashReg + ECC_ENABLE);
+
+	while (1) {
+		int_status = ioread32(FlashReg + ints_addr[info.flash_bank]);
+		if (ecc_enable && (int_status & INTR_STATUS0__ECC_ERR)) {
+			event = process_ecc_int(info.flash_bank, &cur_desc);
+			iowrite32(INTR_STATUS0__ECC_ERR,
+				FlashReg + ints_addr[info.flash_bank]);
+			if (EVENT_UNCORRECTABLE_DATA_ERROR == event) {
+				nand_dbg_print(NAND_DBG_WARN,
+					"ints_bank0 to ints_bank3: "
+					"0x%x, 0x%x, 0x%x, 0x%x, "
+					"ints_cdma: 0x%x\n",
+					ioread32(FlashReg + INTR_STATUS0),
+					ioread32(FlashReg + INTR_STATUS1),
+					ioread32(FlashReg + INTR_STATUS2),
+					ioread32(FlashReg + INTR_STATUS3),
+					ioread32(FlashReg + DMA_INTR));
+				break;
+			}
+		} else if (int_status & INTR_STATUS0__PROGRAM_FAIL) {
+			printk(KERN_ERR "NAND program fail interrupt!\n");
+			process_prog_erase_fail_int(cur_desc);
+			event = EVENT_PROGRAM_FAILURE;
+			break;
+		} else if (int_status & INTR_STATUS0__ERASE_FAIL) {
+			printk(KERN_ERR "NAND erase fail interrupt!\n");
+			process_prog_erase_fail_int(cur_desc);
+			event = EVENT_ERASE_FAILURE;
+			break;
+		} else {
+			cdma_int_status = ioread32(FlashReg + DMA_INTR);
+			if (cdma_int_status & dma_intr_bit[info.flash_bank]) {
+				iowrite32(dma_intr_bit[info.flash_bank],
+					FlashReg + DMA_INTR);
+				update_event_status();
+				event = EVENT_PASS;
+				break;
+			}
+		}
+	}
+
+	int_status = ioread32(FlashReg + ints_addr[info.flash_bank]);
+	iowrite32(int_status, FlashReg + ints_addr[info.flash_bank]);
+	cdma_int_status = ioread32(FlashReg + DMA_INTR);
+	iowrite32(cdma_int_status, FlashReg + DMA_INTR);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	return event;
+}
+
+
+
diff --git a/drivers/staging/spectra/lld_cdma.h b/drivers/staging/spectra/lld_cdma.h
new file mode 100644
index 00000000000..854ea066f0c
--- /dev/null
+++ b/drivers/staging/spectra/lld_cdma.h
@@ -0,0 +1,123 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+/* header for LLD_CDMA.c module */
+
+#ifndef _LLD_CDMA_
+#define _LLD_CDMA_
+
+#include "flash.h"
+
+#define  DEBUG_SYNC    1
+
+/*///////////   CDMA specific MACRO definition */
+#define MAX_DESCS         (255)
+#define MAX_CHANS  (4)
+#define MAX_SYNC_POINTS         (16)
+#define MAX_DESC_PER_CHAN     (MAX_DESCS * 3 + MAX_SYNC_POINTS + 2)
+
+#define CHANNEL_SYNC_MASK       (0x000F)
+#define CHANNEL_DMA_MASK        (0x00F0)
+#define CHANNEL_ID_MASK         (0x0300)
+#define CHANNEL_CONT_MASK       (0x4000)
+#define CHANNEL_INTR_MASK       (0x8000)
+
+#define CHANNEL_SYNC_OFFSET     (0)
+#define CHANNEL_DMA_OFFSET      (4)
+#define CHANNEL_ID_OFFSET       (8)
+#define CHANNEL_CONT_OFFSET     (14)
+#define CHANNEL_INTR_OFFSET     (15)
+
+u16 CDMA_Data_CMD(u8 cmd, u8 *data, u32 block, u16 page, u16 num, u16 flags);
+u16 CDMA_MemCopy_CMD(u8 *dest, u8 *src, u32 byte_cnt, u16 flags);
+u16 CDMA_Execute_CMDs(void);
+void print_pending_cmds(void);
+void print_cdma_descriptors(void);
+
+extern u8 g_SBDCmdIndex;
+extern struct mrst_nand_info info;
+
+
+/*///////////   prototypes: APIs for LLD_CDMA */
+int is_cdma_interrupt(void);
+u16 CDMA_Event_Status(void);
+
+/* CMD-DMA Descriptor Struct.  These are defined by the CMD_DMA HW */
+struct cdma_descriptor {
+	u32 NxtPointerHi;
+	u32 NxtPointerLo;
+	u32 FlashPointerHi;
+	u32 FlashPointerLo;
+	u32 CommandType;
+	u32 MemAddrHi;
+	u32 MemAddrLo;
+	u32 CommandFlags;
+	u32 Channel;
+	u32 Status;
+	u32 MemCopyPointerHi;
+	u32 MemCopyPointerLo;
+	u32 Reserved12;
+	u32 Reserved13;
+	u32 Reserved14;
+	u32 pcmd; /* pending cmd num related to this descriptor */
+};
+
+/* This struct holds one MemCopy descriptor as defined by the HW */
+struct memcpy_descriptor {
+	u32 NxtPointerHi;
+	u32 NxtPointerLo;
+	u32 SrcAddrHi;
+	u32 SrcAddrLo;
+	u32 DestAddrHi;
+	u32 DestAddrLo;
+	u32 XferSize;
+	u32 MemCopyFlags;
+	u32 MemCopyStatus;
+	u32 reserved9;
+	u32 reserved10;
+	u32 reserved11;
+	u32 reserved12;
+	u32 reserved13;
+	u32 reserved14;
+	u32 reserved15;
+};
+
+/* Pending CMD table entries (includes MemCopy parameters */
+struct pending_cmd {
+	u8 CMD;
+	u8 *DataAddr;
+	u32 Block;
+	u16 Page;
+	u16 PageCount;
+	u8 *DataDestAddr;
+	u8 *DataSrcAddr;
+	u32 MemCopyByteCnt;
+	u16 Flags;
+	u16 Status;
+};
+
+#if DEBUG_SYNC
+extern u32 debug_sync_cnt;
+#endif
+
+/* Definitions for CMD DMA descriptor chain fields */
+#define     CMD_DMA_DESC_COMP   0x8000
+#define     CMD_DMA_DESC_FAIL   0x4000
+
+#endif /*_LLD_CDMA_*/
diff --git a/drivers/staging/spectra/lld_emu.c b/drivers/staging/spectra/lld_emu.c
new file mode 100644
index 00000000000..60eb0f6fdba
--- /dev/null
+++ b/drivers/staging/spectra/lld_emu.c
@@ -0,0 +1,780 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include "flash.h"
+#include "ffsdefs.h"
+#include "lld_emu.h"
+#include "lld.h"
+#if CMD_DMA
+#include "lld_cdma.h"
+#endif
+
+#define GLOB_LLD_PAGES           64
+#define GLOB_LLD_PAGE_SIZE       (512+16)
+#define GLOB_LLD_PAGE_DATA_SIZE  512
+#define GLOB_LLD_BLOCKS          2048
+
+#if (CMD_DMA  && FLASH_EMU)
+#include "lld_cdma.h"
+u32 totalUsedBanks;
+u32 valid_banks[MAX_CHANS];
+#endif
+
+#if FLASH_EMU			/* This is for entire module */
+
+static u8 *flash_memory[GLOB_LLD_BLOCKS * GLOB_LLD_PAGES];
+
+/* Read nand emu file and then fill it's content to flash_memory */
+int emu_load_file_to_mem(void)
+{
+	mm_segment_t fs;
+	struct file *nef_filp = NULL;
+	struct inode *inode = NULL;
+	loff_t nef_size = 0;
+	loff_t tmp_file_offset, file_offset;
+	ssize_t nread;
+	int i, rc = -EINVAL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	nef_filp = filp_open("/root/nand_emu_file", O_RDWR | O_LARGEFILE, 0);
+	if (IS_ERR(nef_filp)) {
+		printk(KERN_ERR "filp_open error: "
+		       "Unable to open nand emu file!\n");
+		return PTR_ERR(nef_filp);
+	}
+
+	if (nef_filp->f_path.dentry) {
+		inode = nef_filp->f_path.dentry->d_inode;
+	} else {
+		printk(KERN_ERR "Can not get valid inode!\n");
+		goto out;
+	}
+
+	nef_size = i_size_read(inode->i_mapping->host);
+	if (nef_size <= 0) {
+		printk(KERN_ERR "Invalid nand emu file size: "
+		       "0x%llx\n", nef_size);
+		goto out;
+	} else {
+		nand_dbg_print(NAND_DBG_DEBUG, "nand emu file size: %lld\n",
+			       nef_size);
+	}
+
+	file_offset = 0;
+	for (i = 0; i < GLOB_LLD_BLOCKS * GLOB_LLD_PAGES; i++) {
+		tmp_file_offset = file_offset;
+		nread = vfs_read(nef_filp,
+				 (char __user *)flash_memory[i],
+				 GLOB_LLD_PAGE_SIZE, &tmp_file_offset);
+		if (nread < GLOB_LLD_PAGE_SIZE) {
+			printk(KERN_ERR "%s, Line %d - "
+			       "nand emu file partial read: "
+			       "%d bytes\n", __FILE__, __LINE__, (int)nread);
+			goto out;
+		}
+		file_offset += GLOB_LLD_PAGE_SIZE;
+	}
+	rc = 0;
+
+out:
+	filp_close(nef_filp, current->files);
+	set_fs(fs);
+	return rc;
+}
+
+/* Write contents of flash_memory to nand emu file */
+int emu_write_mem_to_file(void)
+{
+	mm_segment_t fs;
+	struct file *nef_filp = NULL;
+	struct inode *inode = NULL;
+	loff_t nef_size = 0;
+	loff_t tmp_file_offset, file_offset;
+	ssize_t nwritten;
+	int i, rc = -EINVAL;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	nef_filp = filp_open("/root/nand_emu_file", O_RDWR | O_LARGEFILE, 0);
+	if (IS_ERR(nef_filp)) {
+		printk(KERN_ERR "filp_open error: "
+		       "Unable to open nand emu file!\n");
+		return PTR_ERR(nef_filp);
+	}
+
+	if (nef_filp->f_path.dentry) {
+		inode = nef_filp->f_path.dentry->d_inode;
+	} else {
+		printk(KERN_ERR "Invalid " "nef_filp->f_path.dentry value!\n");
+		goto out;
+	}
+
+	nef_size = i_size_read(inode->i_mapping->host);
+	if (nef_size <= 0) {
+		printk(KERN_ERR "Invalid "
+		       "nand emu file size: 0x%llx\n", nef_size);
+		goto out;
+	} else {
+		nand_dbg_print(NAND_DBG_DEBUG, "nand emu file size: "
+			       "%lld\n", nef_size);
+	}
+
+	file_offset = 0;
+	for (i = 0; i < GLOB_LLD_BLOCKS * GLOB_LLD_PAGES; i++) {
+		tmp_file_offset = file_offset;
+		nwritten = vfs_write(nef_filp,
+				     (char __user *)flash_memory[i],
+				     GLOB_LLD_PAGE_SIZE, &tmp_file_offset);
+		if (nwritten < GLOB_LLD_PAGE_SIZE) {
+			printk(KERN_ERR "%s, Line %d - "
+			       "nand emu file partial write: "
+			       "%d bytes\n", __FILE__, __LINE__, (int)nwritten);
+			goto out;
+		}
+		file_offset += GLOB_LLD_PAGE_SIZE;
+	}
+	rc = 0;
+
+out:
+	filp_close(nef_filp, current->files);
+	set_fs(fs);
+	return rc;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Flash_Init
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Creates & initializes the flash RAM array.
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Flash_Init(void)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	flash_memory[0] = (u8 *)vmalloc(GLOB_LLD_PAGE_SIZE *
+						   GLOB_LLD_BLOCKS *
+						   GLOB_LLD_PAGES *
+						   sizeof(u8));
+	if (!flash_memory[0]) {
+		printk(KERN_ERR "Fail to allocate memory "
+		       "for nand emulator!\n");
+		return ERR;
+	}
+
+	memset((char *)(flash_memory[0]), 0xFF,
+	       GLOB_LLD_PAGE_SIZE * GLOB_LLD_BLOCKS * GLOB_LLD_PAGES *
+	       sizeof(u8));
+
+	for (i = 1; i < GLOB_LLD_BLOCKS * GLOB_LLD_PAGES; i++)
+		flash_memory[i] = flash_memory[i - 1] + GLOB_LLD_PAGE_SIZE;
+
+	emu_load_file_to_mem(); /* Load nand emu file to mem */
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Flash_Release
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Releases the flash.
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int emu_Flash_Release(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	emu_write_mem_to_file();  /* Write back mem to nand emu file */
+
+	vfree(flash_memory[0]);
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Read_Device_ID
+* Inputs:       none
+* Outputs:      PASS=1 FAIL=0
+* Description:  Reads the info from the controller registers.
+*               Sets up DeviceInfo structure with device parameters
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+
+u16 emu_Read_Device_ID(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	DeviceInfo.wDeviceMaker = 0;
+	DeviceInfo.wDeviceType = 8;
+	DeviceInfo.wSpectraStartBlock = 36;
+	DeviceInfo.wSpectraEndBlock = GLOB_LLD_BLOCKS - 1;
+	DeviceInfo.wTotalBlocks = GLOB_LLD_BLOCKS;
+	DeviceInfo.wPagesPerBlock = GLOB_LLD_PAGES;
+	DeviceInfo.wPageSize = GLOB_LLD_PAGE_SIZE;
+	DeviceInfo.wPageDataSize = GLOB_LLD_PAGE_DATA_SIZE;
+	DeviceInfo.wPageSpareSize = GLOB_LLD_PAGE_SIZE -
+	    GLOB_LLD_PAGE_DATA_SIZE;
+	DeviceInfo.wBlockSize = DeviceInfo.wPageSize * GLOB_LLD_PAGES;
+	DeviceInfo.wBlockDataSize = DeviceInfo.wPageDataSize * GLOB_LLD_PAGES;
+	DeviceInfo.wDataBlockNum = (u32) (DeviceInfo.wSpectraEndBlock -
+						DeviceInfo.wSpectraStartBlock
+						+ 1);
+	DeviceInfo.MLCDevice = 1; /* Emulate MLC device */
+	DeviceInfo.nBitsInPageNumber =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPagesPerBlock);
+	DeviceInfo.nBitsInPageDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPageDataSize);
+	DeviceInfo.nBitsInBlockDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wBlockDataSize);
+
+#if CMD_DMA
+	totalUsedBanks = 4;
+	valid_banks[0] = 1;
+	valid_banks[1] = 1;
+	valid_banks[2] = 1;
+	valid_banks[3] = 1;
+#endif
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Flash_Reset
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Reset the flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Flash_Reset(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Erase_Block
+* Inputs:       Address
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Erase a block
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Erase_Block(u32 block_add)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (block_add >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "emu_Erase_Block error! "
+		       "Too big block address: %d\n", block_add);
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Erasing block %d\n",
+		(int)block_add);
+
+	for (i = block_add * GLOB_LLD_PAGES;
+	     i < ((block_add + 1) * GLOB_LLD_PAGES); i++) {
+		if (flash_memory[i]) {
+			memset((u8 *)(flash_memory[i]), 0xFF,
+			       DeviceInfo.wPageSize * sizeof(u8));
+		}
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Write_Page_Main
+* Inputs:       Write buffer address pointer
+*               Block number
+*               Page  number
+*               Number of pages to process
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Write the data in the buffer to main area of flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Write_Page_Main(u8 *write_data, u32 Block,
+			   u16 Page, u16 PageCount)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks)
+		return FAIL;
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock)
+		return FAIL;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "emu_Write_Page_Main: "
+		       "lba %u Page %u PageCount %u\n",
+		       (unsigned int)Block,
+		       (unsigned int)Page, (unsigned int)PageCount);
+
+	for (i = 0; i < PageCount; i++) {
+		if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+			printk(KERN_ERR "Run out of memory\n");
+			return FAIL;
+		}
+		memcpy((u8 *) (flash_memory[Block * GLOB_LLD_PAGES + Page]),
+		       write_data, DeviceInfo.wPageDataSize);
+		write_data += DeviceInfo.wPageDataSize;
+		Page++;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Read_Page_Main
+* Inputs:       Read buffer address pointer
+*               Block number
+*               Page  number
+*               Number of pages to process
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Read the data from the flash main area to the buffer
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Read_Page_Main(u8 *read_data, u32 Block,
+			  u16 Page, u16 PageCount)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks)
+		return FAIL;
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock)
+		return FAIL;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "emu_Read_Page_Main: "
+		       "lba %u Page %u PageCount %u\n",
+		       (unsigned int)Block,
+		       (unsigned int)Page, (unsigned int)PageCount);
+
+	for (i = 0; i < PageCount; i++) {
+		if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+			memset(read_data, 0xFF, DeviceInfo.wPageDataSize);
+		} else {
+			memcpy(read_data,
+			       (u8 *) (flash_memory[Block * GLOB_LLD_PAGES
+						      + Page]),
+			       DeviceInfo.wPageDataSize);
+		}
+		read_data += DeviceInfo.wPageDataSize;
+		Page++;
+	}
+
+	return PASS;
+}
+
+#ifndef ELDORA
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Read_Page_Main_Spare
+* Inputs:       Write Buffer
+*                       Address
+*                       Buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Read from flash main+spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Read_Page_Main_Spare(u8 *read_data, u32 Block,
+				u16 Page, u16 PageCount)
+{
+	int i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Read Page Main+Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Read Page Main+Spare "
+		       "Error: Page number too big\n");
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Read Page Main + Spare - "
+		       "No. of pages %u block %u start page %u\n",
+		       (unsigned int)PageCount,
+		       (unsigned int)Block, (unsigned int)Page);
+
+	for (i = 0; i < PageCount; i++) {
+		if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+			memset(read_data, 0xFF, DeviceInfo.wPageSize);
+		} else {
+			memcpy(read_data, (u8 *) (flash_memory[Block *
+								 GLOB_LLD_PAGES
+								 + Page]),
+			       DeviceInfo.wPageSize);
+		}
+
+		read_data += DeviceInfo.wPageSize;
+		Page++;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Write_Page_Main_Spare
+* Inputs:       Write buffer
+*                       address
+*                       buffer length
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Write the buffer to main+spare area of flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Write_Page_Main_Spare(u8 *write_data, u32 Block,
+				 u16 Page, u16 page_count)
+{
+	u16 i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Write Page Main + Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + page_count > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Write Page Main + Spare "
+		       "Error: Page number too big\n");
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Write Page Main+Spare - "
+		       "No. of pages %u block %u start page %u\n",
+		       (unsigned int)page_count,
+		       (unsigned int)Block, (unsigned int)Page);
+
+	for (i = 0; i < page_count; i++) {
+		if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+			printk(KERN_ERR "Run out of memory!\n");
+			return FAIL;
+		}
+		memcpy((u8 *) (flash_memory[Block * GLOB_LLD_PAGES + Page]),
+		       write_data, DeviceInfo.wPageSize);
+		write_data += DeviceInfo.wPageSize;
+		Page++;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Write_Page_Spare
+* Inputs:       Write buffer
+*                       Address
+*                       buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Write the buffer in the spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Write_Page_Spare(u8 *write_data, u32 Block,
+			    u16 Page, u16 PageCount)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Read Page Spare Error: "
+		       "Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Read Page Spare Error: "
+		       "Page number too big\n");
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Write Page Spare- "
+		       "block %u page %u\n",
+		       (unsigned int)Block, (unsigned int)Page);
+
+	if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+		printk(KERN_ERR "Run out of memory!\n");
+		return FAIL;
+	}
+
+	memcpy((u8 *) (flash_memory[Block * GLOB_LLD_PAGES + Page] +
+			 DeviceInfo.wPageDataSize), write_data,
+	       (DeviceInfo.wPageSize - DeviceInfo.wPageDataSize));
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Read_Page_Spare
+* Inputs:       Write Buffer
+*                       Address
+*                       Buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Read data from the spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_Read_Page_Spare(u8 *write_data, u32 Block,
+			   u16 Page, u16 PageCount)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Read Page Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Read Page Spare "
+		       "Error: Page number too big\n");
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Read Page Spare- "
+		       "block %u page %u\n",
+		       (unsigned int)Block, (unsigned int)Page);
+
+	if (NULL == flash_memory[Block * GLOB_LLD_PAGES + Page]) {
+		memset(write_data, 0xFF,
+		       (DeviceInfo.wPageSize - DeviceInfo.wPageDataSize));
+	} else {
+		memcpy(write_data,
+		       (u8 *) (flash_memory[Block * GLOB_LLD_PAGES + Page]
+				 + DeviceInfo.wPageDataSize),
+		       (DeviceInfo.wPageSize - DeviceInfo.wPageDataSize));
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Enable_Disable_Interrupts
+* Inputs:       enable or disable
+* Outputs:      none
+* Description:  NOP
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+void emu_Enable_Disable_Interrupts(u16 INT_ENABLE)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+}
+
+u16 emu_Get_Bad_Block(u32 block)
+{
+	return 0;
+}
+
+#if CMD_DMA
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Support for CDMA functions
+************************************
+*       emu_CDMA_Flash_Init
+*           CDMA_process_data command   (use LLD_CDMA)
+*           CDMA_MemCopy_CMD            (use LLD_CDMA)
+*       emu_CDMA_execute all commands
+*       emu_CDMA_Event_Status
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_CDMA_Flash_Init(void)
+{
+	u16 i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < MAX_DESCS + MAX_CHANS; i++) {
+		PendingCMD[i].CMD = 0;
+		PendingCMD[i].Tag = 0;
+		PendingCMD[i].DataAddr = 0;
+		PendingCMD[i].Block = 0;
+		PendingCMD[i].Page = 0;
+		PendingCMD[i].PageCount = 0;
+		PendingCMD[i].DataDestAddr = 0;
+		PendingCMD[i].DataSrcAddr = 0;
+		PendingCMD[i].MemCopyByteCnt = 0;
+		PendingCMD[i].ChanSync[0] = 0;
+		PendingCMD[i].ChanSync[1] = 0;
+		PendingCMD[i].ChanSync[2] = 0;
+		PendingCMD[i].ChanSync[3] = 0;
+		PendingCMD[i].ChanSync[4] = 0;
+		PendingCMD[i].Status = 3;
+	}
+
+	return PASS;
+}
+
+static void emu_isr(int irq, void *dev_id)
+{
+	/* TODO:  ... */
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_Execute_CMDs
+* Inputs:       tag_count:  the number of pending cmds to do
+* Outputs:      PASS/FAIL
+* Description:  execute each command in the pending CMD array
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_CDMA_Execute_CMDs(u16 tag_count)
+{
+	u16 i, j;
+	u8 CMD;		/* cmd parameter */
+	u8 *data;
+	u32 block;
+	u16 page;
+	u16 count;
+	u16 status = PASS;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	nand_dbg_print(NAND_DBG_TRACE, "At start of Execute CMDs: "
+		       "Tag Count %u\n", tag_count);
+
+	for (i = 0; i < totalUsedBanks; i++) {
+		PendingCMD[i].CMD = DUMMY_CMD;
+		PendingCMD[i].Tag = 0xFF;
+		PendingCMD[i].Block =
+		    (DeviceInfo.wTotalBlocks / totalUsedBanks) * i;
+
+		for (j = 0; j <= MAX_CHANS; j++)
+			PendingCMD[i].ChanSync[j] = 0;
+	}
+
+	CDMA_Execute_CMDs(tag_count);
+
+	print_pending_cmds(tag_count);
+
+#if DEBUG_SYNC
+	}
+	debug_sync_cnt++;
+#endif
+
+	for (i = MAX_CHANS;
+	     i < tag_count + MAX_CHANS; i++) {
+		CMD = PendingCMD[i].CMD;
+		data = PendingCMD[i].DataAddr;
+		block = PendingCMD[i].Block;
+		page = PendingCMD[i].Page;
+		count = PendingCMD[i].PageCount;
+
+		switch (CMD) {
+		case ERASE_CMD:
+			emu_Erase_Block(block);
+			PendingCMD[i].Status = PASS;
+			break;
+		case WRITE_MAIN_CMD:
+			emu_Write_Page_Main(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case WRITE_MAIN_SPARE_CMD:
+			emu_Write_Page_Main_Spare(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case READ_MAIN_CMD:
+			emu_Read_Page_Main(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case MEMCOPY_CMD:
+			memcpy(PendingCMD[i].DataDestAddr,
+			       PendingCMD[i].DataSrcAddr,
+			       PendingCMD[i].MemCopyByteCnt);
+		case DUMMY_CMD:
+			PendingCMD[i].Status = PASS;
+			break;
+		default:
+			PendingCMD[i].Status = FAIL;
+			break;
+		}
+	}
+
+	/*
+	 * Temperory adding code to reset PendingCMD array for basic testing.
+	 * It should be done at the end of  event status function.
+	 */
+	for (i = tag_count + MAX_CHANS; i < MAX_DESCS; i++) {
+		PendingCMD[i].CMD = 0;
+		PendingCMD[i].Tag = 0;
+		PendingCMD[i].DataAddr = 0;
+		PendingCMD[i].Block = 0;
+		PendingCMD[i].Page = 0;
+		PendingCMD[i].PageCount = 0;
+		PendingCMD[i].DataDestAddr = 0;
+		PendingCMD[i].DataSrcAddr = 0;
+		PendingCMD[i].MemCopyByteCnt = 0;
+		PendingCMD[i].ChanSync[0] = 0;
+		PendingCMD[i].ChanSync[1] = 0;
+		PendingCMD[i].ChanSync[2] = 0;
+		PendingCMD[i].ChanSync[3] = 0;
+		PendingCMD[i].ChanSync[4] = 0;
+		PendingCMD[i].Status = CMD_NOT_DONE;
+	}
+
+	nand_dbg_print(NAND_DBG_TRACE, "At end of Execute CMDs.\n");
+
+	emu_isr(0, 0); /* This is a null isr now. Need fill it in future */
+
+	return status;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     emu_Event_Status
+* Inputs:       none
+* Outputs:      Event_Status code
+* Description:  This function can also be used to force errors
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 emu_CDMA_Event_Status(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return EVENT_PASS;
+}
+
+#endif /* CMD_DMA */
+#endif /* !ELDORA */
+#endif /* FLASH_EMU */
diff --git a/drivers/staging/spectra/lld_emu.h b/drivers/staging/spectra/lld_emu.h
new file mode 100644
index 00000000000..63f84c38d3c
--- /dev/null
+++ b/drivers/staging/spectra/lld_emu.h
@@ -0,0 +1,51 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _LLD_EMU_
+#define _LLD_EMU_
+
+#include "ffsport.h"
+#include "ffsdefs.h"
+
+/* prototypes: emulator API functions */
+extern u16 emu_Flash_Reset(void);
+extern u16 emu_Flash_Init(void);
+extern int emu_Flash_Release(void);
+extern u16 emu_Read_Device_ID(void);
+extern u16 emu_Erase_Block(u32 block_addr);
+extern u16 emu_Write_Page_Main(u8 *write_data, u32 Block,
+				u16 Page, u16 PageCount);
+extern u16 emu_Read_Page_Main(u8 *read_data, u32 Block, u16 Page,
+				 u16 PageCount);
+extern u16 emu_Event_Status(void);
+extern void emu_Enable_Disable_Interrupts(u16 INT_ENABLE);
+extern u16 emu_Write_Page_Main_Spare(u8 *write_data, u32 Block,
+					u16 Page, u16 PageCount);
+extern u16 emu_Write_Page_Spare(u8 *write_data, u32 Block,
+					u16 Page, u16 PageCount);
+extern u16 emu_Read_Page_Main_Spare(u8 *read_data, u32 Block,
+				       u16 Page, u16 PageCount);
+extern u16 emu_Read_Page_Spare(u8 *read_data, u32 Block, u16 Page,
+				  u16 PageCount);
+extern u16 emu_Get_Bad_Block(u32 block);
+
+u16 emu_CDMA_Flash_Init(void);
+u16 emu_CDMA_Execute_CMDs(u16 tag_count);
+u16 emu_CDMA_Event_Status(void);
+#endif /*_LLD_EMU_*/
diff --git a/drivers/staging/spectra/lld_mtd.c b/drivers/staging/spectra/lld_mtd.c
new file mode 100644
index 00000000000..0de05b1e75f
--- /dev/null
+++ b/drivers/staging/spectra/lld_mtd.c
@@ -0,0 +1,687 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include "flash.h"
+#include "ffsdefs.h"
+#include "lld_emu.h"
+#include "lld.h"
+#if CMD_DMA
+#include "lld_cdma.h"
+#endif
+
+#define GLOB_LLD_PAGES           64
+#define GLOB_LLD_PAGE_SIZE       (512+16)
+#define GLOB_LLD_PAGE_DATA_SIZE  512
+#define GLOB_LLD_BLOCKS          2048
+
+#if CMD_DMA
+#include "lld_cdma.h"
+u32 totalUsedBanks;
+u32 valid_banks[MAX_CHANS];
+#endif
+
+static struct mtd_info *spectra_mtd;
+static int mtddev = -1;
+module_param(mtddev, int, 0);
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Flash_Init
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Creates & initializes the flash RAM array.
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Flash_Init(void)
+{
+	if (mtddev == -1) {
+		printk(KERN_ERR "No MTD device specified. Give mtddev parameter\n");
+		return FAIL;
+	}
+
+	spectra_mtd = get_mtd_device(NULL, mtddev);
+	if (!spectra_mtd) {
+		printk(KERN_ERR "Failed to obtain MTD device #%d\n", mtddev);
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Flash_Release
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Releases the flash.
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+int mtd_Flash_Release(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+	if (!spectra_mtd)
+		return PASS;
+
+	put_mtd_device(spectra_mtd);
+	spectra_mtd = NULL;
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Read_Device_ID
+* Inputs:       none
+* Outputs:      PASS=1 FAIL=0
+* Description:  Reads the info from the controller registers.
+*               Sets up DeviceInfo structure with device parameters
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+
+u16 mtd_Read_Device_ID(void)
+{
+	uint64_t tmp;
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (!spectra_mtd)
+		return FAIL;
+
+	DeviceInfo.wDeviceMaker = 0;
+	DeviceInfo.wDeviceType = 8;
+	DeviceInfo.wSpectraStartBlock = SPECTRA_START_BLOCK;
+	tmp = spectra_mtd->size;
+	do_div(tmp, spectra_mtd->erasesize);
+	DeviceInfo.wTotalBlocks = tmp;
+	DeviceInfo.wSpectraEndBlock = DeviceInfo.wTotalBlocks - 1;
+	DeviceInfo.wPagesPerBlock = spectra_mtd->erasesize / spectra_mtd->writesize;
+	DeviceInfo.wPageSize = spectra_mtd->writesize + spectra_mtd->oobsize;
+	DeviceInfo.wPageDataSize = spectra_mtd->writesize;
+	DeviceInfo.wPageSpareSize = spectra_mtd->oobsize;
+	DeviceInfo.wBlockSize = DeviceInfo.wPageSize * DeviceInfo.wPagesPerBlock;
+	DeviceInfo.wBlockDataSize = DeviceInfo.wPageDataSize * DeviceInfo.wPagesPerBlock;
+	DeviceInfo.wDataBlockNum = (u32) (DeviceInfo.wSpectraEndBlock -
+						DeviceInfo.wSpectraStartBlock
+						+ 1);
+	DeviceInfo.MLCDevice = 0;//spectra_mtd->celltype & NAND_CI_CELLTYPE_MSK;
+	DeviceInfo.nBitsInPageNumber =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPagesPerBlock);
+	DeviceInfo.nBitsInPageDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPageDataSize);
+	DeviceInfo.nBitsInBlockDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wBlockDataSize);
+
+#if CMD_DMA
+	totalUsedBanks = 4;
+	valid_banks[0] = 1;
+	valid_banks[1] = 1;
+	valid_banks[2] = 1;
+	valid_banks[3] = 1;
+#endif
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Flash_Reset
+* Inputs:       none
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Reset the flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Flash_Reset(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return PASS;
+}
+
+void erase_callback(struct erase_info *e)
+{
+	complete((void *)e->priv);
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Erase_Block
+* Inputs:       Address
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Erase a block
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Erase_Block(u32 block_add)
+{
+	struct erase_info erase;
+	DECLARE_COMPLETION_ONSTACK(comp);
+	int ret;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (block_add >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "mtd_Erase_Block error! "
+		       "Too big block address: %d\n", block_add);
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Erasing block %d\n",
+		(int)block_add);
+
+	erase.mtd = spectra_mtd;
+	erase.callback = erase_callback;
+	erase.addr = block_add * spectra_mtd->erasesize;
+	erase.len = spectra_mtd->erasesize;
+	erase.priv = (unsigned long)&comp;
+
+	ret = spectra_mtd->erase(spectra_mtd, &erase);
+	if (!ret) {
+		wait_for_completion(&comp);
+		if (erase.state != MTD_ERASE_DONE)
+			ret = -EIO;
+	}
+	if (ret) {
+		printk(KERN_WARNING "mtd_Erase_Block error! "
+		       "erase of region [0x%llx, 0x%llx] failed\n",
+		       erase.addr, erase.len);
+		return FAIL;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Write_Page_Main
+* Inputs:       Write buffer address pointer
+*               Block number
+*               Page  number
+*               Number of pages to process
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Write the data in the buffer to main area of flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Write_Page_Main(u8 *write_data, u32 Block,
+			   u16 Page, u16 PageCount)
+{
+	size_t retlen;
+	int ret = 0;
+
+	if (Block >= DeviceInfo.wTotalBlocks)
+		return FAIL;
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock)
+		return FAIL;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "mtd_Write_Page_Main: "
+		       "lba %u Page %u PageCount %u\n",
+		       (unsigned int)Block,
+		       (unsigned int)Page, (unsigned int)PageCount);
+
+
+	while (PageCount) {
+		ret = spectra_mtd->write(spectra_mtd,
+					 (Block * spectra_mtd->erasesize) + (Page * spectra_mtd->writesize),
+					 DeviceInfo.wPageDataSize, &retlen, write_data);
+		if (ret) {
+			printk(KERN_ERR "%s failed %d\n", __func__, ret);
+			return FAIL;
+		}
+		write_data += DeviceInfo.wPageDataSize;
+		Page++;
+		PageCount--;
+	}
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Read_Page_Main
+* Inputs:       Read buffer address pointer
+*               Block number
+*               Page  number
+*               Number of pages to process
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:  Read the data from the flash main area to the buffer
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Read_Page_Main(u8 *read_data, u32 Block,
+			  u16 Page, u16 PageCount)
+{
+	size_t retlen;
+	int ret = 0;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks)
+		return FAIL;
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock)
+		return FAIL;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "mtd_Read_Page_Main: "
+		       "lba %u Page %u PageCount %u\n",
+		       (unsigned int)Block,
+		       (unsigned int)Page, (unsigned int)PageCount);
+
+
+	while (PageCount) {
+		ret = spectra_mtd->read(spectra_mtd,
+					(Block * spectra_mtd->erasesize) + (Page * spectra_mtd->writesize),
+					DeviceInfo.wPageDataSize, &retlen, read_data);
+		if (ret) {
+			printk(KERN_ERR "%s failed %d\n", __func__, ret);
+			return FAIL;
+		}
+		read_data += DeviceInfo.wPageDataSize;
+		Page++;
+		PageCount--;
+	}
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return PASS;
+}
+
+#ifndef ELDORA
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Read_Page_Main_Spare
+* Inputs:       Write Buffer
+*                       Address
+*                       Buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Read from flash main+spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Read_Page_Main_Spare(u8 *read_data, u32 Block,
+				u16 Page, u16 PageCount)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Read Page Main+Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Read Page Main+Spare "
+		       "Error: Page number %d+%d too big in block %d\n",
+		       Page, PageCount, Block);
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Read Page Main + Spare - "
+		       "No. of pages %u block %u start page %u\n",
+		       (unsigned int)PageCount,
+		       (unsigned int)Block, (unsigned int)Page);
+
+
+	while (PageCount) {
+		struct mtd_oob_ops ops;
+		int ret;
+
+		ops.mode = MTD_OOB_AUTO;
+		ops.datbuf = read_data;
+		ops.len = DeviceInfo.wPageDataSize;
+		ops.oobbuf = read_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
+		ops.ooblen = BTSIG_BYTES;
+		ops.ooboffs = 0;
+
+		ret = spectra_mtd->read_oob(spectra_mtd,
+					    (Block * spectra_mtd->erasesize) + (Page * spectra_mtd->writesize),
+					    &ops);
+		if (ret) {
+			printk(KERN_ERR "%s failed %d\n", __func__, ret);
+			return FAIL;
+		}
+		read_data += DeviceInfo.wPageSize;
+		Page++;
+		PageCount--;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Write_Page_Main_Spare
+* Inputs:       Write buffer
+*                       address
+*                       buffer length
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Write the buffer to main+spare area of flash
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Write_Page_Main_Spare(u8 *write_data, u32 Block,
+				 u16 Page, u16 page_count)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Write Page Main + Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + page_count > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Write Page Main + Spare "
+		       "Error: Page number %d+%d too big in block %d\n",
+		       Page, page_count, Block);
+		WARN_ON(1);
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Write Page Main+Spare - "
+		       "No. of pages %u block %u start page %u\n",
+		       (unsigned int)page_count,
+		       (unsigned int)Block, (unsigned int)Page);
+
+	while (page_count) {
+		struct mtd_oob_ops ops;
+		int ret;
+
+		ops.mode = MTD_OOB_AUTO;
+		ops.datbuf = write_data;
+		ops.len = DeviceInfo.wPageDataSize;
+		ops.oobbuf = write_data + DeviceInfo.wPageDataSize + BTSIG_OFFSET;
+		ops.ooblen = BTSIG_BYTES;
+		ops.ooboffs = 0;
+
+		ret = spectra_mtd->write_oob(spectra_mtd,
+					     (Block * spectra_mtd->erasesize) + (Page * spectra_mtd->writesize),
+					     &ops);
+		if (ret) {
+			printk(KERN_ERR "%s failed %d\n", __func__, ret);
+			return FAIL;
+		}
+		write_data += DeviceInfo.wPageSize;
+		Page++;
+		page_count--;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Write_Page_Spare
+* Inputs:       Write buffer
+*                       Address
+*                       buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Write the buffer in the spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Write_Page_Spare(u8 *write_data, u32 Block,
+			    u16 Page, u16 PageCount)
+{
+	WARN_ON(1);
+	return FAIL;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Read_Page_Spare
+* Inputs:       Write Buffer
+*                       Address
+*                       Buffer size
+* Outputs:      PASS=0 (notice 0=ok here)
+* Description:          Read data from the spare area
+*
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_Read_Page_Spare(u8 *read_data, u32 Block,
+			   u16 Page, u16 PageCount)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (Block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "Read Page Spare "
+		       "Error: Block Address too big\n");
+		return FAIL;
+	}
+
+	if (Page + PageCount > DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "Read Page Spare "
+		       "Error: Page number too big\n");
+		return FAIL;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Read Page Spare- "
+		       "block %u page %u (%u pages)\n",
+		       (unsigned int)Block, (unsigned int)Page, PageCount);
+
+	while (PageCount) {
+		struct mtd_oob_ops ops;
+		int ret;
+
+		ops.mode = MTD_OOB_AUTO;
+		ops.datbuf = NULL;
+		ops.len = 0;
+		ops.oobbuf = read_data;
+		ops.ooblen = BTSIG_BYTES;
+		ops.ooboffs = 0;
+
+		ret = spectra_mtd->read_oob(spectra_mtd,
+					    (Block * spectra_mtd->erasesize) + (Page * spectra_mtd->writesize),
+					    &ops);
+		if (ret) {
+			printk(KERN_ERR "%s failed %d\n", __func__, ret);
+			return FAIL;
+		}
+
+		read_data += DeviceInfo.wPageSize;
+		Page++;
+		PageCount--;
+	}
+
+	return PASS;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Enable_Disable_Interrupts
+* Inputs:       enable or disable
+* Outputs:      none
+* Description:  NOP
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+void mtd_Enable_Disable_Interrupts(u16 INT_ENABLE)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+}
+
+u16 mtd_Get_Bad_Block(u32 block)
+{
+	return 0;
+}
+
+#if CMD_DMA
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Support for CDMA functions
+************************************
+*       mtd_CDMA_Flash_Init
+*           CDMA_process_data command   (use LLD_CDMA)
+*           CDMA_MemCopy_CMD            (use LLD_CDMA)
+*       mtd_CDMA_execute all commands
+*       mtd_CDMA_Event_Status
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_CDMA_Flash_Init(void)
+{
+	u16 i;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0; i < MAX_DESCS + MAX_CHANS; i++) {
+		PendingCMD[i].CMD = 0;
+		PendingCMD[i].Tag = 0;
+		PendingCMD[i].DataAddr = 0;
+		PendingCMD[i].Block = 0;
+		PendingCMD[i].Page = 0;
+		PendingCMD[i].PageCount = 0;
+		PendingCMD[i].DataDestAddr = 0;
+		PendingCMD[i].DataSrcAddr = 0;
+		PendingCMD[i].MemCopyByteCnt = 0;
+		PendingCMD[i].ChanSync[0] = 0;
+		PendingCMD[i].ChanSync[1] = 0;
+		PendingCMD[i].ChanSync[2] = 0;
+		PendingCMD[i].ChanSync[3] = 0;
+		PendingCMD[i].ChanSync[4] = 0;
+		PendingCMD[i].Status = 3;
+	}
+
+	return PASS;
+}
+
+static void mtd_isr(int irq, void *dev_id)
+{
+	/* TODO:  ... */
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     CDMA_Execute_CMDs
+* Inputs:       tag_count:  the number of pending cmds to do
+* Outputs:      PASS/FAIL
+* Description:  execute each command in the pending CMD array
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_CDMA_Execute_CMDs(u16 tag_count)
+{
+	u16 i, j;
+	u8 CMD;		/* cmd parameter */
+	u8 *data;
+	u32 block;
+	u16 page;
+	u16 count;
+	u16 status = PASS;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	nand_dbg_print(NAND_DBG_TRACE, "At start of Execute CMDs: "
+		       "Tag Count %u\n", tag_count);
+
+	for (i = 0; i < totalUsedBanks; i++) {
+		PendingCMD[i].CMD = DUMMY_CMD;
+		PendingCMD[i].Tag = 0xFF;
+		PendingCMD[i].Block =
+		    (DeviceInfo.wTotalBlocks / totalUsedBanks) * i;
+
+		for (j = 0; j <= MAX_CHANS; j++)
+			PendingCMD[i].ChanSync[j] = 0;
+	}
+
+	CDMA_Execute_CMDs(tag_count);
+
+#ifdef VERBOSE
+		print_pending_cmds(tag_count);
+#endif
+#if DEBUG_SYNC
+	}
+	debug_sync_cnt++;
+#endif
+
+	for (i = MAX_CHANS;
+	     i < tag_count + MAX_CHANS; i++) {
+		CMD = PendingCMD[i].CMD;
+		data = PendingCMD[i].DataAddr;
+		block = PendingCMD[i].Block;
+		page = PendingCMD[i].Page;
+		count = PendingCMD[i].PageCount;
+
+		switch (CMD) {
+		case ERASE_CMD:
+			mtd_Erase_Block(block);
+			PendingCMD[i].Status = PASS;
+			break;
+		case WRITE_MAIN_CMD:
+			mtd_Write_Page_Main(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case WRITE_MAIN_SPARE_CMD:
+			mtd_Write_Page_Main_Spare(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case READ_MAIN_CMD:
+			mtd_Read_Page_Main(data, block, page, count);
+			PendingCMD[i].Status = PASS;
+			break;
+		case MEMCOPY_CMD:
+			memcpy(PendingCMD[i].DataDestAddr,
+			       PendingCMD[i].DataSrcAddr,
+			       PendingCMD[i].MemCopyByteCnt);
+		case DUMMY_CMD:
+			PendingCMD[i].Status = PASS;
+			break;
+		default:
+			PendingCMD[i].Status = FAIL;
+			break;
+		}
+	}
+
+	/*
+	 * Temperory adding code to reset PendingCMD array for basic testing.
+	 * It should be done at the end of  event status function.
+	 */
+	for (i = tag_count + MAX_CHANS; i < MAX_DESCS; i++) {
+		PendingCMD[i].CMD = 0;
+		PendingCMD[i].Tag = 0;
+		PendingCMD[i].DataAddr = 0;
+		PendingCMD[i].Block = 0;
+		PendingCMD[i].Page = 0;
+		PendingCMD[i].PageCount = 0;
+		PendingCMD[i].DataDestAddr = 0;
+		PendingCMD[i].DataSrcAddr = 0;
+		PendingCMD[i].MemCopyByteCnt = 0;
+		PendingCMD[i].ChanSync[0] = 0;
+		PendingCMD[i].ChanSync[1] = 0;
+		PendingCMD[i].ChanSync[2] = 0;
+		PendingCMD[i].ChanSync[3] = 0;
+		PendingCMD[i].ChanSync[4] = 0;
+		PendingCMD[i].Status = CMD_NOT_DONE;
+	}
+
+	nand_dbg_print(NAND_DBG_TRACE, "At end of Execute CMDs.\n");
+
+	mtd_isr(0, 0); /* This is a null isr now. Need fill it in future */
+
+	return status;
+}
+
+/*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
+* Function:     mtd_Event_Status
+* Inputs:       none
+* Outputs:      Event_Status code
+* Description:  This function can also be used to force errors
+*&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
+u16 mtd_CDMA_Event_Status(void)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	return EVENT_PASS;
+}
+
+#endif /* CMD_DMA */
+#endif /* !ELDORA */
diff --git a/drivers/staging/spectra/lld_mtd.h b/drivers/staging/spectra/lld_mtd.h
new file mode 100644
index 00000000000..4e81ee87b53
--- /dev/null
+++ b/drivers/staging/spectra/lld_mtd.h
@@ -0,0 +1,51 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _LLD_MTD_
+#define _LLD_MTD_
+
+#include "ffsport.h"
+#include "ffsdefs.h"
+
+/* prototypes: MTD API functions */
+extern u16 mtd_Flash_Reset(void);
+extern u16 mtd_Flash_Init(void);
+extern int mtd_Flash_Release(void);
+extern u16 mtd_Read_Device_ID(void);
+extern u16 mtd_Erase_Block(u32 block_addr);
+extern u16 mtd_Write_Page_Main(u8 *write_data, u32 Block,
+				u16 Page, u16 PageCount);
+extern u16 mtd_Read_Page_Main(u8 *read_data, u32 Block, u16 Page,
+				 u16 PageCount);
+extern u16 mtd_Event_Status(void);
+extern void mtd_Enable_Disable_Interrupts(u16 INT_ENABLE);
+extern u16 mtd_Write_Page_Main_Spare(u8 *write_data, u32 Block,
+					u16 Page, u16 PageCount);
+extern u16 mtd_Write_Page_Spare(u8 *write_data, u32 Block,
+					u16 Page, u16 PageCount);
+extern u16 mtd_Read_Page_Main_Spare(u8 *read_data, u32 Block,
+				       u16 Page, u16 PageCount);
+extern u16 mtd_Read_Page_Spare(u8 *read_data, u32 Block, u16 Page,
+				  u16 PageCount);
+extern u16 mtd_Get_Bad_Block(u32 block);
+
+u16 mtd_CDMA_Flash_Init(void);
+u16 mtd_CDMA_Execute_CMDs(u16 tag_count);
+u16 mtd_CDMA_Event_Status(void);
+#endif /*_LLD_MTD_*/
diff --git a/drivers/staging/spectra/lld_nand.c b/drivers/staging/spectra/lld_nand.c
new file mode 100644
index 00000000000..13c3ad2db39
--- /dev/null
+++ b/drivers/staging/spectra/lld_nand.c
@@ -0,0 +1,2601 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include "lld.h"
+#include "lld_nand.h"
+#include "lld_cdma.h"
+
+#include "spectraswconfig.h"
+#include "flash.h"
+#include "ffsdefs.h"
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+
+#include "nand_regs.h"
+
+#define SPECTRA_NAND_NAME    "nd"
+
+#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
+#define MAX_PAGES_PER_RW        128
+
+#define INT_IDLE_STATE                 0
+#define INT_READ_PAGE_MAIN    0x01
+#define INT_WRITE_PAGE_MAIN    0x02
+#define INT_PIPELINE_READ_AHEAD    0x04
+#define INT_PIPELINE_WRITE_AHEAD    0x08
+#define INT_MULTI_PLANE_READ    0x10
+#define INT_MULTI_PLANE_WRITE    0x11
+
+static u32 enable_ecc;
+
+struct mrst_nand_info info;
+
+int totalUsedBanks;
+u32 GLOB_valid_banks[LLD_MAX_FLASH_BANKS];
+
+void __iomem *FlashReg;
+void __iomem *FlashMem;
+
+u16 conf_parameters[] = {
+	0x0000,
+	0x0000,
+	0x01F4,
+	0x01F4,
+	0x01F4,
+	0x01F4,
+	0x0000,
+	0x0000,
+	0x0001,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0000,
+	0x0040,
+	0x0001,
+	0x000A,
+	0x000A,
+	0x000A,
+	0x0000,
+	0x0000,
+	0x0005,
+	0x0012,
+	0x000C
+};
+
+u16   NAND_Get_Bad_Block(u32 block)
+{
+	u32 status = PASS;
+	u32 flag_bytes  = 0;
+	u32 skip_bytes  = DeviceInfo.wSpareSkipBytes;
+	u32 page, i;
+	u8 *pReadSpareBuf = buf_get_bad_block;
+
+	if (enable_ecc)
+		flag_bytes = DeviceInfo.wNumPageSpareFlag;
+
+	for (page = 0; page < 2; page++) {
+		status = NAND_Read_Page_Spare(pReadSpareBuf, block, page, 1);
+		if (status != PASS)
+			return READ_ERROR;
+		for (i = flag_bytes; i < (flag_bytes + skip_bytes); i++)
+			if (pReadSpareBuf[i] != 0xff)
+				return DEFECTIVE_BLOCK;
+	}
+
+	for (page = 1; page < 3; page++) {
+		status = NAND_Read_Page_Spare(pReadSpareBuf, block,
+			DeviceInfo.wPagesPerBlock - page , 1);
+		if (status != PASS)
+			return READ_ERROR;
+		for (i = flag_bytes; i < (flag_bytes + skip_bytes); i++)
+			if (pReadSpareBuf[i] != 0xff)
+				return DEFECTIVE_BLOCK;
+	}
+
+	return GOOD_BLOCK;
+}
+
+
+u16 NAND_Flash_Reset(void)
+{
+	u32 i;
+	u32 intr_status_rst_comp[4] = {INTR_STATUS0__RST_COMP,
+		INTR_STATUS1__RST_COMP,
+		INTR_STATUS2__RST_COMP,
+		INTR_STATUS3__RST_COMP};
+	u32 intr_status_time_out[4] = {INTR_STATUS0__TIME_OUT,
+		INTR_STATUS1__TIME_OUT,
+		INTR_STATUS2__TIME_OUT,
+		INTR_STATUS3__TIME_OUT};
+	u32 intr_status[4] = {INTR_STATUS0, INTR_STATUS1,
+		INTR_STATUS2, INTR_STATUS3};
+	u32 device_reset_banks[4] = {DEVICE_RESET__BANK0,
+		DEVICE_RESET__BANK1,
+		DEVICE_RESET__BANK2,
+		DEVICE_RESET__BANK3};
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
+		iowrite32(intr_status_rst_comp[i] | intr_status_time_out[i],
+		FlashReg + intr_status[i]);
+
+	for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
+		iowrite32(device_reset_banks[i], FlashReg + DEVICE_RESET);
+		while (!(ioread32(FlashReg + intr_status[i]) &
+			(intr_status_rst_comp[i] | intr_status_time_out[i])))
+			;
+		if (ioread32(FlashReg + intr_status[i]) &
+			intr_status_time_out[i])
+			nand_dbg_print(NAND_DBG_WARN,
+			"NAND Reset operation timed out on bank %d\n", i);
+	}
+
+	for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
+		iowrite32(intr_status_rst_comp[i] | intr_status_time_out[i],
+			FlashReg + intr_status[i]);
+
+	return PASS;
+}
+
+static void NAND_ONFi_Timing_Mode(u16 mode)
+{
+	u16 Trea[6] = {40, 30, 25, 20, 20, 16};
+	u16 Trp[6] = {50, 25, 17, 15, 12, 10};
+	u16 Treh[6] = {30, 15, 15, 10, 10, 7};
+	u16 Trc[6] = {100, 50, 35, 30, 25, 20};
+	u16 Trhoh[6] = {0, 15, 15, 15, 15, 15};
+	u16 Trloh[6] = {0, 0, 0, 0, 5, 5};
+	u16 Tcea[6] = {100, 45, 30, 25, 25, 25};
+	u16 Tadl[6] = {200, 100, 100, 100, 70, 70};
+	u16 Trhw[6] = {200, 100, 100, 100, 100, 100};
+	u16 Trhz[6] = {200, 100, 100, 100, 100, 100};
+	u16 Twhr[6] = {120, 80, 80, 60, 60, 60};
+	u16 Tcs[6] = {70, 35, 25, 25, 20, 15};
+
+	u16 TclsRising = 1;
+	u16 data_invalid_rhoh, data_invalid_rloh, data_invalid;
+	u16 dv_window = 0;
+	u16 en_lo, en_hi;
+	u16 acc_clks;
+	u16 addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	en_lo = CEIL_DIV(Trp[mode], CLK_X);
+	en_hi = CEIL_DIV(Treh[mode], CLK_X);
+
+#if ONFI_BLOOM_TIME
+	if ((en_hi * CLK_X) < (Treh[mode] + 2))
+		en_hi++;
+#endif
+
+	if ((en_lo + en_hi) * CLK_X < Trc[mode])
+		en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
+
+	if ((en_lo + en_hi) < CLK_MULTI)
+		en_lo += CLK_MULTI - en_lo - en_hi;
+
+	while (dv_window < 8) {
+		data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
+
+		data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
+
+		data_invalid =
+		    data_invalid_rhoh <
+		    data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
+
+		dv_window = data_invalid - Trea[mode];
+
+		if (dv_window < 8)
+			en_lo++;
+	}
+
+	acc_clks = CEIL_DIV(Trea[mode], CLK_X);
+
+	while (((acc_clks * CLK_X) - Trea[mode]) < 3)
+		acc_clks++;
+
+	if ((data_invalid - acc_clks * CLK_X) < 2)
+		nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+			__FILE__, __LINE__);
+
+	addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
+	re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
+	re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
+	we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
+	cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
+	if (!TclsRising)
+		cs_cnt = CEIL_DIV(Tcs[mode], CLK_X);
+	if (cs_cnt == 0)
+		cs_cnt = 1;
+
+	if (Tcea[mode]) {
+		while (((cs_cnt * CLK_X) + Trea[mode]) < Tcea[mode])
+			cs_cnt++;
+	}
+
+#if MODE5_WORKAROUND
+	if (mode == 5)
+		acc_clks = 5;
+#endif
+
+	/* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
+	if ((ioread32(FlashReg + MANUFACTURER_ID) == 0) &&
+		(ioread32(FlashReg + DEVICE_ID) == 0x88))
+		acc_clks = 6;
+
+	iowrite32(acc_clks, FlashReg + ACC_CLKS);
+	iowrite32(re_2_we, FlashReg + RE_2_WE);
+	iowrite32(re_2_re, FlashReg + RE_2_RE);
+	iowrite32(we_2_re, FlashReg + WE_2_RE);
+	iowrite32(addr_2_data, FlashReg + ADDR_2_DATA);
+	iowrite32(en_lo, FlashReg + RDWR_EN_LO_CNT);
+	iowrite32(en_hi, FlashReg + RDWR_EN_HI_CNT);
+	iowrite32(cs_cnt, FlashReg + CS_SETUP_CNT);
+}
+
+static void index_addr(u32 address, u32 data)
+{
+	iowrite32(address, FlashMem);
+	iowrite32(data, FlashMem + 0x10);
+}
+
+static void index_addr_read_data(u32 address, u32 *pdata)
+{
+	iowrite32(address, FlashMem);
+	*pdata = ioread32(FlashMem + 0x10);
+}
+
+static void set_ecc_config(void)
+{
+#if SUPPORT_8BITECC
+	if ((ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
+		(ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE) <= 128))
+		iowrite32(8, FlashReg + ECC_CORRECTION);
+#endif
+
+	if ((ioread32(FlashReg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
+		== 1) {
+		DeviceInfo.wECCBytesPerSector = 4;
+		DeviceInfo.wECCBytesPerSector *= DeviceInfo.wDevicesConnected;
+		DeviceInfo.wNumPageSpareFlag =
+			DeviceInfo.wPageSpareSize -
+			DeviceInfo.wPageDataSize /
+			(ECC_SECTOR_SIZE * DeviceInfo.wDevicesConnected) *
+			DeviceInfo.wECCBytesPerSector
+			- DeviceInfo.wSpareSkipBytes;
+	} else {
+		DeviceInfo.wECCBytesPerSector =
+			(ioread32(FlashReg + ECC_CORRECTION) &
+			ECC_CORRECTION__VALUE) * 13 / 8;
+		if ((DeviceInfo.wECCBytesPerSector) % 2 == 0)
+			DeviceInfo.wECCBytesPerSector += 2;
+		else
+			DeviceInfo.wECCBytesPerSector += 1;
+
+		DeviceInfo.wECCBytesPerSector *= DeviceInfo.wDevicesConnected;
+		DeviceInfo.wNumPageSpareFlag = DeviceInfo.wPageSpareSize -
+			DeviceInfo.wPageDataSize /
+			(ECC_SECTOR_SIZE * DeviceInfo.wDevicesConnected) *
+			DeviceInfo.wECCBytesPerSector
+			- DeviceInfo.wSpareSkipBytes;
+	}
+}
+
+static u16 get_onfi_nand_para(void)
+{
+	int i;
+	u16 blks_lun_l, blks_lun_h, n_of_luns;
+	u32 blockperlun, id;
+
+	iowrite32(DEVICE_RESET__BANK0, FlashReg + DEVICE_RESET);
+
+	while (!((ioread32(FlashReg + INTR_STATUS0) &
+		INTR_STATUS0__RST_COMP) |
+		(ioread32(FlashReg + INTR_STATUS0) &
+		INTR_STATUS0__TIME_OUT)))
+		;
+
+	if (ioread32(FlashReg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
+		iowrite32(DEVICE_RESET__BANK1, FlashReg + DEVICE_RESET);
+		while (!((ioread32(FlashReg + INTR_STATUS1) &
+			INTR_STATUS1__RST_COMP) |
+			(ioread32(FlashReg + INTR_STATUS1) &
+			INTR_STATUS1__TIME_OUT)))
+			;
+
+		if (ioread32(FlashReg + INTR_STATUS1) &
+			INTR_STATUS1__RST_COMP) {
+			iowrite32(DEVICE_RESET__BANK2,
+				FlashReg + DEVICE_RESET);
+			while (!((ioread32(FlashReg + INTR_STATUS2) &
+				INTR_STATUS2__RST_COMP) |
+				(ioread32(FlashReg + INTR_STATUS2) &
+				INTR_STATUS2__TIME_OUT)))
+				;
+
+			if (ioread32(FlashReg + INTR_STATUS2) &
+				INTR_STATUS2__RST_COMP) {
+				iowrite32(DEVICE_RESET__BANK3,
+					FlashReg + DEVICE_RESET);
+				while (!((ioread32(FlashReg + INTR_STATUS3) &
+					INTR_STATUS3__RST_COMP) |
+					(ioread32(FlashReg + INTR_STATUS3) &
+					INTR_STATUS3__TIME_OUT)))
+					;
+			} else {
+				printk(KERN_ERR "Getting a time out for bank 2!\n");
+			}
+		} else {
+			printk(KERN_ERR "Getting a time out for bank 1!\n");
+		}
+	}
+
+	iowrite32(INTR_STATUS0__TIME_OUT, FlashReg + INTR_STATUS0);
+	iowrite32(INTR_STATUS1__TIME_OUT, FlashReg + INTR_STATUS1);
+	iowrite32(INTR_STATUS2__TIME_OUT, FlashReg + INTR_STATUS2);
+	iowrite32(INTR_STATUS3__TIME_OUT, FlashReg + INTR_STATUS3);
+
+	DeviceInfo.wONFIDevFeatures =
+		ioread32(FlashReg + ONFI_DEVICE_FEATURES);
+	DeviceInfo.wONFIOptCommands =
+		ioread32(FlashReg + ONFI_OPTIONAL_COMMANDS);
+	DeviceInfo.wONFITimingMode =
+		ioread32(FlashReg + ONFI_TIMING_MODE);
+	DeviceInfo.wONFIPgmCacheTimingMode =
+		ioread32(FlashReg + ONFI_PGM_CACHE_TIMING_MODE);
+
+	n_of_luns = ioread32(FlashReg + ONFI_DEVICE_NO_OF_LUNS) &
+		ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
+	blks_lun_l = ioread32(FlashReg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
+	blks_lun_h = ioread32(FlashReg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
+
+	blockperlun = (blks_lun_h << 16) | blks_lun_l;
+
+	DeviceInfo.wTotalBlocks = n_of_luns * blockperlun;
+
+	if (!(ioread32(FlashReg + ONFI_TIMING_MODE) &
+		ONFI_TIMING_MODE__VALUE))
+		return FAIL;
+
+	for (i = 5; i > 0; i--) {
+		if (ioread32(FlashReg + ONFI_TIMING_MODE) & (0x01 << i))
+			break;
+	}
+
+	NAND_ONFi_Timing_Mode(i);
+
+	index_addr(MODE_11 | 0, 0x90);
+	index_addr(MODE_11 | 1, 0);
+
+	for (i = 0; i < 3; i++)
+		index_addr_read_data(MODE_11 | 2, &id);
+
+	nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
+
+	DeviceInfo.MLCDevice = id & 0x0C;
+
+	/* By now, all the ONFI devices we know support the page cache */
+	/* rw feature. So here we enable the pipeline_rw_ahead feature */
+	/* iowrite32(1, FlashReg + CACHE_WRITE_ENABLE); */
+	/* iowrite32(1, FlashReg + CACHE_READ_ENABLE);  */
+
+	return PASS;
+}
+
+static void get_samsung_nand_para(void)
+{
+	u8 no_of_planes;
+	u32 blk_size;
+	u64 plane_size, capacity;
+	u32 id_bytes[5];
+	int i;
+
+	index_addr((u32)(MODE_11 | 0), 0x90);
+	index_addr((u32)(MODE_11 | 1), 0);
+	for (i = 0; i < 5; i++)
+		index_addr_read_data((u32)(MODE_11 | 2), &id_bytes[i]);
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
+		id_bytes[0], id_bytes[1], id_bytes[2],
+		id_bytes[3], id_bytes[4]);
+
+	if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+		/* Set timing register values according to datasheet */
+		iowrite32(5, FlashReg + ACC_CLKS);
+		iowrite32(20, FlashReg + RE_2_WE);
+		iowrite32(12, FlashReg + WE_2_RE);
+		iowrite32(14, FlashReg + ADDR_2_DATA);
+		iowrite32(3, FlashReg + RDWR_EN_LO_CNT);
+		iowrite32(2, FlashReg + RDWR_EN_HI_CNT);
+		iowrite32(2, FlashReg + CS_SETUP_CNT);
+	}
+
+	no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
+	plane_size  = (u64)64 << ((id_bytes[4] & 0x70) >> 4);
+	blk_size = 64 << ((ioread32(FlashReg + DEVICE_PARAM_1) & 0x30) >> 4);
+	capacity = (u64)128 * plane_size * no_of_planes;
+
+	DeviceInfo.wTotalBlocks = (u32)GLOB_u64_Div(capacity, blk_size);
+}
+
+static void get_toshiba_nand_para(void)
+{
+	void __iomem *scratch_reg;
+	u32 tmp;
+
+	/* Workaround to fix a controller bug which reports a wrong */
+	/* spare area size for some kind of Toshiba NAND device */
+	if ((ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
+		(ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE) == 64)) {
+		iowrite32(216, FlashReg + DEVICE_SPARE_AREA_SIZE);
+		tmp = ioread32(FlashReg + DEVICES_CONNECTED) *
+			ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE);
+		iowrite32(tmp, FlashReg + LOGICAL_PAGE_SPARE_SIZE);
+#if SUPPORT_15BITECC
+		iowrite32(15, FlashReg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+		iowrite32(8, FlashReg + ECC_CORRECTION);
+#endif
+	}
+
+	/* As Toshiba NAND can not provide it's block number, */
+	/* so here we need user to provide the correct block */
+	/* number in a scratch register before the Linux NAND */
+	/* driver is loaded. If no valid value found in the scratch */
+	/* register, then we use default block number value */
+	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
+	if (!scratch_reg) {
+		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
+			__FILE__, __LINE__);
+		DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+	} else {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
+		DeviceInfo.wTotalBlocks = 1 << ioread8(scratch_reg);
+		if (DeviceInfo.wTotalBlocks < 512)
+			DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+		iounmap(scratch_reg);
+	}
+}
+
+static void get_hynix_nand_para(void)
+{
+	void __iomem *scratch_reg;
+	u32 main_size, spare_size;
+
+	switch (DeviceInfo.wDeviceID) {
+	case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
+	case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
+		iowrite32(128, FlashReg + PAGES_PER_BLOCK);
+		iowrite32(4096, FlashReg + DEVICE_MAIN_AREA_SIZE);
+		iowrite32(224, FlashReg + DEVICE_SPARE_AREA_SIZE);
+		main_size = 4096 * ioread32(FlashReg + DEVICES_CONNECTED);
+		spare_size = 224 * ioread32(FlashReg + DEVICES_CONNECTED);
+		iowrite32(main_size, FlashReg + LOGICAL_PAGE_DATA_SIZE);
+		iowrite32(spare_size, FlashReg + LOGICAL_PAGE_SPARE_SIZE);
+		iowrite32(0, FlashReg + DEVICE_WIDTH);
+#if SUPPORT_15BITECC
+		iowrite32(15, FlashReg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+		iowrite32(8, FlashReg + ECC_CORRECTION);
+#endif
+		DeviceInfo.MLCDevice  = 1;
+		break;
+	default:
+		nand_dbg_print(NAND_DBG_WARN,
+			"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
+			"Will use default parameter values instead.\n",
+			DeviceInfo.wDeviceID);
+	}
+
+	scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
+	if (!scratch_reg) {
+		printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
+			__FILE__, __LINE__);
+		DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+	} else {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Spectra: ioremap reg address: 0x%p\n", scratch_reg);
+		DeviceInfo.wTotalBlocks = 1 << ioread8(scratch_reg);
+		if (DeviceInfo.wTotalBlocks < 512)
+			DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+		iounmap(scratch_reg);
+	}
+}
+
+static void find_valid_banks(void)
+{
+	u32 id[LLD_MAX_FLASH_BANKS];
+	int i;
+
+	totalUsedBanks = 0;
+	for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
+		index_addr((u32)(MODE_11 | (i << 24) | 0), 0x90);
+		index_addr((u32)(MODE_11 | (i << 24) | 1), 0);
+		index_addr_read_data((u32)(MODE_11 | (i << 24) | 2), &id[i]);
+
+		nand_dbg_print(NAND_DBG_DEBUG,
+			"Return 1st ID for bank[%d]: %x\n", i, id[i]);
+
+		if (i == 0) {
+			if (id[i] & 0x0ff)
+				GLOB_valid_banks[i] = 1;
+		} else {
+			if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
+				GLOB_valid_banks[i] = 1;
+		}
+
+		totalUsedBanks += GLOB_valid_banks[i];
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"totalUsedBanks: %d\n", totalUsedBanks);
+}
+
+static void detect_partition_feature(void)
+{
+	if (ioread32(FlashReg + FEATURES) & FEATURES__PARTITION) {
+		if ((ioread32(FlashReg + PERM_SRC_ID_1) &
+			PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
+			DeviceInfo.wSpectraStartBlock =
+			    ((ioread32(FlashReg + MIN_MAX_BANK_1) &
+			      MIN_MAX_BANK_1__MIN_VALUE) *
+			     DeviceInfo.wTotalBlocks)
+			    +
+			    (ioread32(FlashReg + MIN_BLK_ADDR_1) &
+			    MIN_BLK_ADDR_1__VALUE);
+
+			DeviceInfo.wSpectraEndBlock =
+			    (((ioread32(FlashReg + MIN_MAX_BANK_1) &
+			       MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
+			     DeviceInfo.wTotalBlocks)
+			    +
+			    (ioread32(FlashReg + MAX_BLK_ADDR_1) &
+			    MAX_BLK_ADDR_1__VALUE);
+
+			DeviceInfo.wTotalBlocks *= totalUsedBanks;
+
+			if (DeviceInfo.wSpectraEndBlock >=
+			    DeviceInfo.wTotalBlocks) {
+				DeviceInfo.wSpectraEndBlock =
+				    DeviceInfo.wTotalBlocks - 1;
+			}
+
+			DeviceInfo.wDataBlockNum =
+				DeviceInfo.wSpectraEndBlock -
+				DeviceInfo.wSpectraStartBlock + 1;
+		} else {
+			DeviceInfo.wTotalBlocks *= totalUsedBanks;
+			DeviceInfo.wSpectraStartBlock = SPECTRA_START_BLOCK;
+			DeviceInfo.wSpectraEndBlock =
+				DeviceInfo.wTotalBlocks - 1;
+			DeviceInfo.wDataBlockNum =
+				DeviceInfo.wSpectraEndBlock -
+				DeviceInfo.wSpectraStartBlock + 1;
+		}
+	} else {
+		DeviceInfo.wTotalBlocks *= totalUsedBanks;
+		DeviceInfo.wSpectraStartBlock = SPECTRA_START_BLOCK;
+		DeviceInfo.wSpectraEndBlock = DeviceInfo.wTotalBlocks - 1;
+		DeviceInfo.wDataBlockNum =
+			DeviceInfo.wSpectraEndBlock -
+			DeviceInfo.wSpectraStartBlock + 1;
+	}
+}
+
+static void dump_device_info(void)
+{
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceInfo:\n");
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
+		DeviceInfo.wDeviceMaker);
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
+		DeviceInfo.wDeviceID);
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
+		DeviceInfo.wDeviceType);
+	nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
+		DeviceInfo.wSpectraStartBlock);
+	nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
+		DeviceInfo.wSpectraEndBlock);
+	nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
+		DeviceInfo.wTotalBlocks);
+	nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
+		DeviceInfo.wPagesPerBlock);
+	nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
+		DeviceInfo.wPageSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
+		DeviceInfo.wPageDataSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
+		DeviceInfo.wPageSpareSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
+		DeviceInfo.wNumPageSpareFlag);
+	nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
+		DeviceInfo.wECCBytesPerSector);
+	nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
+		DeviceInfo.wBlockSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
+		DeviceInfo.wBlockDataSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
+		DeviceInfo.wDataBlockNum);
+	nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
+		DeviceInfo.bPlaneNum);
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
+		DeviceInfo.wDeviceMainAreaSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
+		DeviceInfo.wDeviceSpareAreaSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
+		DeviceInfo.wDevicesConnected);
+	nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
+		DeviceInfo.wDeviceWidth);
+	nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
+		DeviceInfo.wHWRevision);
+	nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
+		DeviceInfo.wHWFeatures);
+	nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
+		DeviceInfo.wONFIDevFeatures);
+	nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
+		DeviceInfo.wONFIOptCommands);
+	nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
+		DeviceInfo.wONFITimingMode);
+	nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
+		DeviceInfo.wONFIPgmCacheTimingMode);
+	nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
+		DeviceInfo.MLCDevice ? "Yes" : "No");
+	nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
+		DeviceInfo.wSpareSkipBytes);
+	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
+		DeviceInfo.nBitsInPageNumber);
+	nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
+		DeviceInfo.nBitsInPageDataSize);
+	nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
+		DeviceInfo.nBitsInBlockDataSize);
+}
+
+u16 NAND_Read_Device_ID(void)
+{
+	u16 status = PASS;
+	u8 no_of_planes;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	iowrite32(0x02, FlashReg + SPARE_AREA_SKIP_BYTES);
+	iowrite32(0xffff, FlashReg + SPARE_AREA_MARKER);
+	DeviceInfo.wDeviceMaker = ioread32(FlashReg + MANUFACTURER_ID);
+	DeviceInfo.wDeviceID = ioread32(FlashReg + DEVICE_ID);
+	DeviceInfo.MLCDevice = ioread32(FlashReg + DEVICE_PARAM_0) & 0x0c;
+
+	if (ioread32(FlashReg + ONFI_DEVICE_NO_OF_LUNS) &
+		ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
+		if (FAIL == get_onfi_nand_para())
+			return FAIL;
+	} else if (DeviceInfo.wDeviceMaker == 0xEC) { /* Samsung NAND */
+		get_samsung_nand_para();
+	} else if (DeviceInfo.wDeviceMaker == 0x98) { /* Toshiba NAND */
+		get_toshiba_nand_para();
+	} else if (DeviceInfo.wDeviceMaker == 0xAD) { /* Hynix NAND */
+		get_hynix_nand_para();
+	} else {
+		DeviceInfo.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+	}
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
+			"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
+			"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+			"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
+			ioread32(FlashReg + ACC_CLKS),
+			ioread32(FlashReg + RE_2_WE),
+			ioread32(FlashReg + WE_2_RE),
+			ioread32(FlashReg + ADDR_2_DATA),
+			ioread32(FlashReg + RDWR_EN_LO_CNT),
+			ioread32(FlashReg + RDWR_EN_HI_CNT),
+			ioread32(FlashReg + CS_SETUP_CNT));
+
+	DeviceInfo.wHWRevision = ioread32(FlashReg + REVISION);
+	DeviceInfo.wHWFeatures = ioread32(FlashReg + FEATURES);
+
+	DeviceInfo.wDeviceMainAreaSize =
+		ioread32(FlashReg + DEVICE_MAIN_AREA_SIZE);
+	DeviceInfo.wDeviceSpareAreaSize =
+		ioread32(FlashReg + DEVICE_SPARE_AREA_SIZE);
+
+	DeviceInfo.wPageDataSize =
+		ioread32(FlashReg + LOGICAL_PAGE_DATA_SIZE);
+
+	/* Note: When using the Micon 4K NAND device, the controller will report
+	 * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
+	 * And if force set it to 218 bytes, the controller can not work
+	 * correctly. So just let it be. But keep in mind that this bug may
+	 * cause
+	 * other problems in future.       - Yunpeng  2008-10-10
+	 */
+	DeviceInfo.wPageSpareSize =
+		ioread32(FlashReg + LOGICAL_PAGE_SPARE_SIZE);
+
+	DeviceInfo.wPagesPerBlock = ioread32(FlashReg + PAGES_PER_BLOCK);
+
+	DeviceInfo.wPageSize =
+	    DeviceInfo.wPageDataSize + DeviceInfo.wPageSpareSize;
+	DeviceInfo.wBlockSize =
+	    DeviceInfo.wPageSize * DeviceInfo.wPagesPerBlock;
+	DeviceInfo.wBlockDataSize =
+	    DeviceInfo.wPagesPerBlock * DeviceInfo.wPageDataSize;
+
+	DeviceInfo.wDeviceWidth = ioread32(FlashReg + DEVICE_WIDTH);
+	DeviceInfo.wDeviceType =
+		((ioread32(FlashReg + DEVICE_WIDTH) > 0) ? 16 : 8);
+
+	DeviceInfo.wDevicesConnected = ioread32(FlashReg + DEVICES_CONNECTED);
+
+	DeviceInfo.wSpareSkipBytes =
+		ioread32(FlashReg + SPARE_AREA_SKIP_BYTES) *
+		DeviceInfo.wDevicesConnected;
+
+	DeviceInfo.nBitsInPageNumber =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPagesPerBlock);
+	DeviceInfo.nBitsInPageDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wPageDataSize);
+	DeviceInfo.nBitsInBlockDataSize =
+		(u8)GLOB_Calc_Used_Bits(DeviceInfo.wBlockDataSize);
+
+	set_ecc_config();
+
+	no_of_planes = ioread32(FlashReg + NUMBER_OF_PLANES) &
+		NUMBER_OF_PLANES__VALUE;
+
+	switch (no_of_planes) {
+	case 0:
+	case 1:
+	case 3:
+	case 7:
+		DeviceInfo.bPlaneNum = no_of_planes + 1;
+		break;
+	default:
+		status = FAIL;
+		break;
+	}
+
+	find_valid_banks();
+
+	detect_partition_feature();
+
+	dump_device_info();
+
+	return status;
+}
+
+u16 NAND_UnlockArrayAll(void)
+{
+	u64 start_addr, end_addr;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	start_addr = 0;
+	end_addr = ((u64)DeviceInfo.wBlockSize *
+		(DeviceInfo.wTotalBlocks - 1)) >>
+		DeviceInfo.nBitsInPageDataSize;
+
+	index_addr((u32)(MODE_10 | (u32)start_addr), 0x10);
+	index_addr((u32)(MODE_10 | (u32)end_addr), 0x11);
+
+	return PASS;
+}
+
+void NAND_LLD_Enable_Disable_Interrupts(u16 INT_ENABLE)
+{
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (INT_ENABLE)
+		iowrite32(1, FlashReg + GLOBAL_INT_ENABLE);
+	else
+		iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
+}
+
+u16 NAND_Erase_Block(u32 block)
+{
+	u16 status = PASS;
+	u64 flash_add;
+	u16 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (block >= DeviceInfo.wTotalBlocks)
+		status = FAIL;
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+
+		iowrite32(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL,
+			FlashReg + intr_status);
+
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)), 1);
+
+		while (!(ioread32(FlashReg + intr_status) &
+			(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL)))
+			;
+
+		if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__ERASE_FAIL)
+			status = FAIL;
+
+		iowrite32(INTR_STATUS0__ERASE_COMP | INTR_STATUS0__ERASE_FAIL,
+			FlashReg + intr_status);
+	}
+
+	return status;
+}
+
+static u32 Boundary_Check_Block_Page(u32 block, u16 page,
+						u16 page_count)
+{
+	u32 status = PASS;
+
+	if (block >= DeviceInfo.wTotalBlocks)
+		status = FAIL;
+
+	if (page + page_count > DeviceInfo.wPagesPerBlock)
+		status = FAIL;
+
+	return status;
+}
+
+u16 NAND_Read_Page_Spare(u8 *read_data, u32 block, u16 page,
+			    u16 page_count)
+{
+	u32 status = PASS;
+	u32 i;
+	u64 flash_add;
+	u32 PageSpareSize = DeviceInfo.wPageSpareSize;
+	u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u8 *page_spare = buf_read_page_spare;
+
+	if (block >= DeviceInfo.wTotalBlocks) {
+		printk(KERN_ERR "block too big: %d\n", (int)block);
+		status = FAIL;
+	}
+
+	if (page >= DeviceInfo.wPagesPerBlock) {
+		printk(KERN_ERR "page too big: %d\n", page);
+		status = FAIL;
+	}
+
+	if (page_count > 1) {
+		printk(KERN_ERR "page count too big: %d\n", page_count);
+		status = FAIL;
+	}
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+		iowrite32(ioread32(FlashReg + intr_status),
+			FlashReg + intr_status);
+
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+			0x41);
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+			0x2000 | page_count);
+		while (!(ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__LOAD_COMP))
+			;
+
+		iowrite32((u32)(MODE_01 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+			FlashMem);
+
+		for (i = 0; i < (PageSpareSize / 4); i++)
+			*((u32 *)page_spare + i) =
+					ioread32(FlashMem + 0x10);
+
+		if (enable_ecc) {
+			for (i = 0; i < spareFlagBytes; i++)
+				read_data[i] =
+					page_spare[PageSpareSize -
+						spareFlagBytes + i];
+			for (i = 0; i < (PageSpareSize - spareFlagBytes); i++)
+				read_data[spareFlagBytes + i] =
+							page_spare[i];
+		} else {
+			for (i = 0; i < PageSpareSize; i++)
+				read_data[i] = page_spare[i];
+		}
+
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+	}
+
+	return status;
+}
+
+/* No use function. Should be removed later */
+u16 NAND_Write_Page_Spare(u8 *write_data, u32 block, u16 page,
+			     u16 page_count)
+{
+	printk(KERN_ERR
+	       "Error! This function (NAND_Write_Page_Spare) should never"
+		" be called!\n");
+	return ERR;
+}
+
+/* op value:  0 - DDMA read;  1 - DDMA write */
+static void ddma_trans(u8 *data, u64 flash_add,
+			u32 flash_bank, int op, u32 numPages)
+{
+	u32 data_addr;
+
+	/* Map virtual address to bus address for DDMA */
+	data_addr = virt_to_bus(data);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+		(u16)(2 << 12) | (op << 8) | numPages);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		((u16)(0x0FFFF & (data_addr >> 16)) << 8)),
+		(u16)(2 << 12) | (2 << 8) | 0);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		((u16)(0x0FFFF & data_addr) << 8)),
+		(u16)(2 << 12) | (3 << 8) | 0);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(1 << 16) | (0x40 << 8)),
+		(u16)(2 << 12) | (4 << 8) | 0);
+}
+
+/* If data in buf are all 0xff, then return 1; otherwise return 0 */
+static int check_all_1(u8 *buf)
+{
+	int i, j, cnt;
+
+	for (i = 0; i < DeviceInfo.wPageDataSize; i++) {
+		if (buf[i] != 0xff) {
+			cnt = 0;
+			nand_dbg_print(NAND_DBG_WARN,
+				"the first non-0xff data byte is: %d\n", i);
+			for (j = i; j < DeviceInfo.wPageDataSize; j++) {
+				nand_dbg_print(NAND_DBG_WARN, "0x%x ", buf[j]);
+				cnt++;
+				if (cnt > 8)
+					break;
+			}
+			nand_dbg_print(NAND_DBG_WARN, "\n");
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+static int do_ecc_new(unsigned long bank, u8 *buf,
+				u32 block, u16 page)
+{
+	int status = PASS;
+	u16 err_page = 0;
+	u16 err_byte;
+	u8 err_sect;
+	u8 err_dev;
+	u16 err_fix_info;
+	u16 err_addr;
+	u32 ecc_sect_size;
+	u8 *err_pos;
+	u32 err_page_addr[4] = {ERR_PAGE_ADDR0,
+		ERR_PAGE_ADDR1, ERR_PAGE_ADDR2, ERR_PAGE_ADDR3};
+
+	ecc_sect_size = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+
+	do {
+		err_page = ioread32(FlashReg + err_page_addr[bank]);
+		err_addr = ioread32(FlashReg + ECC_ERROR_ADDRESS);
+		err_byte = err_addr & ECC_ERROR_ADDRESS__OFFSET;
+		err_sect = ((err_addr & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12);
+		err_fix_info = ioread32(FlashReg + ERR_CORRECTION_INFO);
+		err_dev = ((err_fix_info & ERR_CORRECTION_INFO__DEVICE_NR)
+			>> 8);
+		if (err_fix_info & ERR_CORRECTION_INFO__ERROR_TYPE) {
+			nand_dbg_print(NAND_DBG_WARN,
+				"%s, Line %d Uncorrectable ECC error "
+				"when read block %d page %d."
+				"PTN_INTR register: 0x%x "
+				"err_page: %d, err_sect: %d, err_byte: %d, "
+				"err_dev: %d, ecc_sect_size: %d, "
+				"err_fix_info: 0x%x\n",
+				__FILE__, __LINE__, block, page,
+				ioread32(FlashReg + PTN_INTR),
+				err_page, err_sect, err_byte, err_dev,
+				ecc_sect_size, (u32)err_fix_info);
+
+			if (check_all_1(buf))
+				nand_dbg_print(NAND_DBG_WARN, "%s, Line %d"
+					       "All 0xff!\n",
+					       __FILE__, __LINE__);
+			else
+				nand_dbg_print(NAND_DBG_WARN, "%s, Line %d"
+					       "Not all 0xff!\n",
+					       __FILE__, __LINE__);
+			status = FAIL;
+		} else {
+			nand_dbg_print(NAND_DBG_WARN,
+				"%s, Line %d Found ECC error "
+				"when read block %d page %d."
+				"err_page: %d, err_sect: %d, err_byte: %d, "
+				"err_dev: %d, ecc_sect_size: %d, "
+				"err_fix_info: 0x%x\n",
+				__FILE__, __LINE__, block, page,
+				err_page, err_sect, err_byte, err_dev,
+				ecc_sect_size, (u32)err_fix_info);
+			if (err_byte < ECC_SECTOR_SIZE) {
+				err_pos = buf +
+					(err_page - page) *
+					DeviceInfo.wPageDataSize +
+					err_sect * ecc_sect_size +
+					err_byte *
+					DeviceInfo.wDevicesConnected +
+					err_dev;
+
+				*err_pos ^= err_fix_info &
+					ERR_CORRECTION_INFO__BYTEMASK;
+			}
+		}
+	} while (!(err_fix_info & ERR_CORRECTION_INFO__LAST_ERR_INFO));
+
+	return status;
+}
+
+u16 NAND_Read_Page_Main_Polling(u8 *read_data,
+		u32 block, u16 page, u16 page_count)
+{
+	u32 status = PASS;
+	u64 flash_add;
+	u32 intr_status = 0;
+	u32 flash_bank;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u8 *read_data_l;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	intr_status = intr_status_addresses[flash_bank];
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	if (page_count > 1) {
+		read_data_l = read_data;
+		while (page_count > MAX_PAGES_PER_RW) {
+			if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+				status = NAND_Multiplane_Read(read_data_l,
+					block, page, MAX_PAGES_PER_RW);
+			else
+				status = NAND_Pipeline_Read_Ahead_Polling(
+					read_data_l, block, page,
+					MAX_PAGES_PER_RW);
+
+			if (status == FAIL)
+				return status;
+
+			read_data_l += DeviceInfo.wPageDataSize *
+					MAX_PAGES_PER_RW;
+			page_count -= MAX_PAGES_PER_RW;
+			page += MAX_PAGES_PER_RW;
+		}
+		if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+			status = NAND_Multiplane_Read(read_data_l,
+					block, page, page_count);
+		else
+			status = NAND_Pipeline_Read_Ahead_Polling(
+					read_data_l, block, page, page_count);
+
+		return status;
+	}
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	ddma_trans(read_data, flash_add, flash_bank, 0, 1);
+
+	if (enable_ecc) {
+		while (!(ioread32(FlashReg + intr_status) &
+			(INTR_STATUS0__ECC_TRANSACTION_DONE |
+			INTR_STATUS0__ECC_ERR)))
+			;
+
+		if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__ECC_ERR) {
+			iowrite32(INTR_STATUS0__ECC_ERR,
+				FlashReg + intr_status);
+			status = do_ecc_new(flash_bank, read_data,
+					block, page);
+		}
+
+		if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__ECC_TRANSACTION_DONE &
+			INTR_STATUS0__ECC_ERR)
+			iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE |
+				INTR_STATUS0__ECC_ERR,
+				FlashReg + intr_status);
+		else if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__ECC_TRANSACTION_DONE)
+			iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE,
+				FlashReg + intr_status);
+		else if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__ECC_ERR)
+			iowrite32(INTR_STATUS0__ECC_ERR,
+				FlashReg + intr_status);
+	} else {
+		while (!(ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__DMA_CMD_COMP))
+			;
+		iowrite32(INTR_STATUS0__DMA_CMD_COMP, FlashReg + intr_status);
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	return status;
+}
+
+u16 NAND_Pipeline_Read_Ahead_Polling(u8 *read_data,
+			u32 block, u16 page, u16 page_count)
+{
+	u32 status = PASS;
+	u32 NumPages = page_count;
+	u64 flash_add;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u32 ecc_done_OR_dma_comp;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	if (page_count < 2)
+		status = FAIL;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		*DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+		iowrite32(ioread32(FlashReg + intr_status),
+			FlashReg + intr_status);
+
+		iowrite32(1, FlashReg + DMA_ENABLE);
+		while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+			;
+
+		iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+		ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
+
+		ecc_done_OR_dma_comp = 0;
+		while (1) {
+			if (enable_ecc) {
+				while (!ioread32(FlashReg + intr_status))
+					;
+
+				if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_ERR) {
+					iowrite32(INTR_STATUS0__ECC_ERR,
+						FlashReg + intr_status);
+					status = do_ecc_new(flash_bank,
+						read_data, block, page);
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__DMA_CMD_COMP) {
+					iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+						FlashReg + intr_status);
+
+					if (1 == ecc_done_OR_dma_comp)
+						break;
+
+					ecc_done_OR_dma_comp = 1;
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_TRANSACTION_DONE) {
+					iowrite32(
+					INTR_STATUS0__ECC_TRANSACTION_DONE,
+					FlashReg + intr_status);
+
+					if (1 == ecc_done_OR_dma_comp)
+						break;
+
+					ecc_done_OR_dma_comp = 1;
+				}
+			} else {
+				while (!(ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__DMA_CMD_COMP))
+					;
+
+				iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+					FlashReg + intr_status);
+				break;
+			}
+
+			iowrite32((~INTR_STATUS0__ECC_ERR) &
+				(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
+				(~INTR_STATUS0__DMA_CMD_COMP),
+				FlashReg + intr_status);
+
+		}
+
+		iowrite32(ioread32(FlashReg + intr_status),
+			FlashReg + intr_status);
+
+		iowrite32(0, FlashReg + DMA_ENABLE);
+
+		while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+			;
+	}
+	return status;
+}
+
+u16 NAND_Read_Page_Main(u8 *read_data, u32 block, u16 page,
+			   u16 page_count)
+{
+	u32 status = PASS;
+	u64 flash_add;
+	u32 intr_status = 0;
+	u32 flash_bank;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	int ret;
+	u8 *read_data_l;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	intr_status = intr_status_addresses[flash_bank];
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	if (page_count > 1) {
+		read_data_l = read_data;
+		while (page_count > MAX_PAGES_PER_RW) {
+			if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+				status = NAND_Multiplane_Read(read_data_l,
+					block, page, MAX_PAGES_PER_RW);
+			else
+				status = NAND_Pipeline_Read_Ahead(
+					read_data_l, block, page,
+					MAX_PAGES_PER_RW);
+
+			if (status == FAIL)
+				return status;
+
+			read_data_l += DeviceInfo.wPageDataSize *
+					MAX_PAGES_PER_RW;
+			page_count -= MAX_PAGES_PER_RW;
+			page += MAX_PAGES_PER_RW;
+		}
+		if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+			status = NAND_Multiplane_Read(read_data_l,
+					block, page, page_count);
+		else
+			status = NAND_Pipeline_Read_Ahead(
+					read_data_l, block, page, page_count);
+
+		return status;
+	}
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	/* Fill the mrst_nand_info structure */
+	info.state = INT_READ_PAGE_MAIN;
+	info.read_data = read_data;
+	info.flash_bank = flash_bank;
+	info.block = block;
+	info.page = page;
+	info.ret = PASS;
+
+	ddma_trans(read_data, flash_add, flash_bank, 0, 1);
+
+	iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable Interrupt */
+
+	ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
+	if (!ret) {
+		printk(KERN_ERR "Wait for completion timeout "
+			"in %s, Line %d\n", __FILE__, __LINE__);
+		status = ERR;
+	} else {
+		status = info.ret;
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	return status;
+}
+
+void Conv_Spare_Data_Log2Phy_Format(u8 *data)
+{
+	int i;
+	const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	const u32 PageSpareSize  = DeviceInfo.wPageSpareSize;
+
+	if (enable_ecc) {
+		for (i = spareFlagBytes - 1; i >= 0; i++)
+			data[PageSpareSize - spareFlagBytes + i] = data[i];
+	}
+}
+
+void Conv_Spare_Data_Phy2Log_Format(u8 *data)
+{
+	int i;
+	const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	const u32 PageSpareSize = DeviceInfo.wPageSpareSize;
+
+	if (enable_ecc) {
+		for (i = 0; i < spareFlagBytes; i++)
+			data[i] = data[PageSpareSize - spareFlagBytes + i];
+	}
+}
+
+
+void Conv_Main_Spare_Data_Log2Phy_Format(u8 *data, u16 page_count)
+{
+	const u32 PageSize = DeviceInfo.wPageSize;
+	const u32 PageDataSize = DeviceInfo.wPageDataSize;
+	const u32 eccBytes = DeviceInfo.wECCBytesPerSector;
+	const u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
+	const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	u32 eccSectorSize;
+	u32 page_offset;
+	int i, j;
+
+	eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+	if (enable_ecc) {
+		while (page_count > 0) {
+			page_offset = (page_count - 1) * PageSize;
+			j = (DeviceInfo.wPageDataSize / eccSectorSize);
+			for (i = spareFlagBytes - 1; i >= 0; i--)
+				data[page_offset +
+					(eccSectorSize + eccBytes) * j + i] =
+					data[page_offset + PageDataSize + i];
+			for (j--; j >= 1; j--) {
+				for (i = eccSectorSize - 1; i >= 0; i--)
+					data[page_offset +
+					(eccSectorSize + eccBytes) * j + i] =
+						data[page_offset +
+						eccSectorSize * j + i];
+			}
+			for (i = (PageSize - spareSkipBytes) - 1;
+				i >= PageDataSize; i--)
+				data[page_offset + i + spareSkipBytes] =
+					data[page_offset + i];
+			page_count--;
+		}
+	}
+}
+
+void Conv_Main_Spare_Data_Phy2Log_Format(u8 *data, u16 page_count)
+{
+	const u32 PageSize = DeviceInfo.wPageSize;
+	const u32 PageDataSize = DeviceInfo.wPageDataSize;
+	const u32 eccBytes = DeviceInfo.wECCBytesPerSector;
+	const u32 spareSkipBytes = DeviceInfo.wSpareSkipBytes;
+	const u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	u32 eccSectorSize;
+	u32 page_offset;
+	int i, j;
+
+	eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+	if (enable_ecc) {
+		while (page_count > 0) {
+			page_offset = (page_count - 1) * PageSize;
+			for (i = PageDataSize;
+				i < PageSize - spareSkipBytes;
+				i++)
+				data[page_offset + i] =
+					data[page_offset + i +
+					spareSkipBytes];
+			for (j = 1;
+			j < DeviceInfo.wPageDataSize / eccSectorSize;
+			j++) {
+				for (i = 0; i < eccSectorSize; i++)
+					data[page_offset +
+					eccSectorSize * j + i] =
+						data[page_offset +
+						(eccSectorSize + eccBytes) * j
+						+ i];
+			}
+			for (i = 0; i < spareFlagBytes; i++)
+				data[page_offset + PageDataSize + i] =
+					data[page_offset +
+					(eccSectorSize + eccBytes) * j + i];
+			page_count--;
+		}
+	}
+}
+
+/* Un-tested function */
+u16 NAND_Multiplane_Read(u8 *read_data, u32 block, u16 page,
+			    u16 page_count)
+{
+	u32 status = PASS;
+	u32 NumPages = page_count;
+	u64 flash_add;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u32 ecc_done_OR_dma_comp;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+		iowrite32(ioread32(FlashReg + intr_status),
+			FlashReg + intr_status);
+
+		iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+		iowrite32(0x01, FlashReg + MULTIPLANE_OPERATION);
+
+		iowrite32(1, FlashReg + DMA_ENABLE);
+		while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+			;
+		index_addr((u32)(MODE_10 | (flash_bank << 24) |
+			(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+		ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
+
+		ecc_done_OR_dma_comp = 0;
+		while (1) {
+			if (enable_ecc) {
+				while (!ioread32(FlashReg + intr_status))
+					;
+
+				if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_ERR) {
+					iowrite32(INTR_STATUS0__ECC_ERR,
+						FlashReg + intr_status);
+					status = do_ecc_new(flash_bank,
+						read_data, block, page);
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__DMA_CMD_COMP) {
+					iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+						FlashReg + intr_status);
+
+					if (1 == ecc_done_OR_dma_comp)
+						break;
+
+					ecc_done_OR_dma_comp = 1;
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_TRANSACTION_DONE) {
+					iowrite32(
+					INTR_STATUS0__ECC_TRANSACTION_DONE,
+					FlashReg + intr_status);
+
+					if (1 == ecc_done_OR_dma_comp)
+						break;
+
+					ecc_done_OR_dma_comp = 1;
+				}
+			} else {
+				while (!(ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__DMA_CMD_COMP))
+					;
+				iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+					FlashReg + intr_status);
+				break;
+			}
+
+			iowrite32((~INTR_STATUS0__ECC_ERR) &
+				(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
+				(~INTR_STATUS0__DMA_CMD_COMP),
+				FlashReg + intr_status);
+
+		}
+
+		iowrite32(ioread32(FlashReg + intr_status),
+			FlashReg + intr_status);
+
+		iowrite32(0, FlashReg + DMA_ENABLE);
+
+		while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+			;
+
+		iowrite32(0, FlashReg + MULTIPLANE_OPERATION);
+	}
+
+	return status;
+}
+
+u16 NAND_Pipeline_Read_Ahead(u8 *read_data, u32 block,
+				u16 page, u16 page_count)
+{
+	u32 status = PASS;
+	u32 NumPages = page_count;
+	u64 flash_add;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	int ret;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	if (page_count < 2)
+		status = FAIL;
+
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		*DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	intr_status = intr_status_addresses[flash_bank];
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	/* Fill the mrst_nand_info structure */
+	info.state = INT_PIPELINE_READ_AHEAD;
+	info.read_data = read_data;
+	info.flash_bank = flash_bank;
+	info.block = block;
+	info.page = page;
+	info.ret = PASS;
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+
+	ddma_trans(read_data, flash_add, flash_bank, 0, NumPages);
+
+	iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable Interrupt */
+
+	ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
+	if (!ret) {
+		printk(KERN_ERR "Wait for completion timeout "
+			"in %s, Line %d\n", __FILE__, __LINE__);
+		status = ERR;
+	} else {
+		status = info.ret;
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	return status;
+}
+
+
+u16 NAND_Write_Page_Main(u8 *write_data, u32 block, u16 page,
+			    u16 page_count)
+{
+	u32 status = PASS;
+	u64 flash_add;
+	u32 intr_status = 0;
+	u32 flash_bank;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	int ret;
+	u8 *write_data_l;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	intr_status = intr_status_addresses[flash_bank];
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	iowrite32(INTR_STATUS0__PROGRAM_COMP |
+		INTR_STATUS0__PROGRAM_FAIL, FlashReg + intr_status);
+
+	if (page_count > 1) {
+		write_data_l = write_data;
+		while (page_count > MAX_PAGES_PER_RW) {
+			if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+				status = NAND_Multiplane_Write(write_data_l,
+					block, page, MAX_PAGES_PER_RW);
+			else
+				status = NAND_Pipeline_Write_Ahead(
+					write_data_l, block, page,
+					MAX_PAGES_PER_RW);
+			if (status == FAIL)
+				return status;
+
+			write_data_l += DeviceInfo.wPageDataSize *
+					MAX_PAGES_PER_RW;
+			page_count -= MAX_PAGES_PER_RW;
+			page += MAX_PAGES_PER_RW;
+		}
+		if (ioread32(FlashReg + MULTIPLANE_OPERATION))
+			status = NAND_Multiplane_Write(write_data_l,
+				block, page, page_count);
+		else
+			status = NAND_Pipeline_Write_Ahead(write_data_l,
+				block, page, page_count);
+
+		return status;
+	}
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	/* Fill the mrst_nand_info structure */
+	info.state = INT_WRITE_PAGE_MAIN;
+	info.write_data = write_data;
+	info.flash_bank = flash_bank;
+	info.block = block;
+	info.page = page;
+	info.ret = PASS;
+
+	ddma_trans(write_data, flash_add, flash_bank, 1, 1);
+
+	iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable interrupt */
+
+	ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
+	if (!ret) {
+		printk(KERN_ERR "Wait for completion timeout "
+			"in %s, Line %d\n", __FILE__, __LINE__);
+		status = ERR;
+	} else {
+		status = info.ret;
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+	while (ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG)
+		;
+
+	return status;
+}
+
+void NAND_ECC_Ctrl(int enable)
+{
+	if (enable) {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Will enable ECC in %s, Line %d, Function: %s\n",
+			__FILE__, __LINE__, __func__);
+		iowrite32(1, FlashReg + ECC_ENABLE);
+		enable_ecc = 1;
+	} else {
+		nand_dbg_print(NAND_DBG_WARN,
+			"Will disable ECC in %s, Line %d, Function: %s\n",
+			__FILE__, __LINE__, __func__);
+		iowrite32(0, FlashReg + ECC_ENABLE);
+		enable_ecc = 0;
+	}
+}
+
+u16 NAND_Write_Page_Main_Spare(u8 *write_data, u32 block,
+					u16 page, u16 page_count)
+{
+	u32 status = PASS;
+	u32 i, j, page_num = 0;
+	u32 PageSize = DeviceInfo.wPageSize;
+	u32 PageDataSize = DeviceInfo.wPageDataSize;
+	u32 eccBytes = DeviceInfo.wECCBytesPerSector;
+	u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	u32 spareSkipBytes  = DeviceInfo.wSpareSkipBytes;
+	u64 flash_add;
+	u32 eccSectorSize;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u8 *page_main_spare = buf_write_page_main_spare;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+
+		iowrite32(1, FlashReg + TRANSFER_SPARE_REG);
+
+		while ((status != FAIL) && (page_count > 0)) {
+			flash_add = (u64)(block %
+			(DeviceInfo.wTotalBlocks / totalUsedBanks)) *
+			DeviceInfo.wBlockDataSize +
+			(u64)page * DeviceInfo.wPageDataSize;
+
+			iowrite32(ioread32(FlashReg + intr_status),
+				FlashReg + intr_status);
+
+			iowrite32((u32)(MODE_01 | (flash_bank << 24) |
+				(flash_add >>
+				DeviceInfo.nBitsInPageDataSize)),
+				FlashMem);
+
+			if (enable_ecc) {
+				for (j = 0;
+				     j <
+				     DeviceInfo.wPageDataSize / eccSectorSize;
+				     j++) {
+					for (i = 0; i < eccSectorSize; i++)
+						page_main_spare[(eccSectorSize +
+								 eccBytes) * j +
+								i] =
+						    write_data[eccSectorSize *
+							       j + i];
+
+					for (i = 0; i < eccBytes; i++)
+						page_main_spare[(eccSectorSize +
+								 eccBytes) * j +
+								eccSectorSize +
+								i] =
+						    write_data[PageDataSize +
+							       spareFlagBytes +
+							       eccBytes * j +
+							       i];
+				}
+
+				for (i = 0; i < spareFlagBytes; i++)
+					page_main_spare[(eccSectorSize +
+							 eccBytes) * j + i] =
+					    write_data[PageDataSize + i];
+
+				for (i = PageSize - 1; i >= PageDataSize +
+							spareSkipBytes; i--)
+					page_main_spare[i] = page_main_spare[i -
+								spareSkipBytes];
+
+				for (i = PageDataSize; i < PageDataSize +
+							spareSkipBytes; i++)
+					page_main_spare[i] = 0xff;
+
+				for (i = 0; i < PageSize / 4; i++)
+					iowrite32(
+					*((u32 *)page_main_spare + i),
+					FlashMem + 0x10);
+			} else {
+
+				for (i = 0; i < PageSize / 4; i++)
+					iowrite32(*((u32 *)write_data + i),
+						FlashMem + 0x10);
+			}
+
+			while (!(ioread32(FlashReg + intr_status) &
+				(INTR_STATUS0__PROGRAM_COMP |
+				INTR_STATUS0__PROGRAM_FAIL)))
+				;
+
+			if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__PROGRAM_FAIL)
+				status = FAIL;
+
+			iowrite32(ioread32(FlashReg + intr_status),
+					FlashReg + intr_status);
+
+			page_num++;
+			page_count--;
+			write_data += PageSize;
+		}
+
+		iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+	}
+
+	return status;
+}
+
+u16 NAND_Read_Page_Main_Spare(u8 *read_data, u32 block, u16 page,
+				 u16 page_count)
+{
+	u32 status = PASS;
+	u32 i, j;
+	u64 flash_add = 0;
+	u32 PageSize = DeviceInfo.wPageSize;
+	u32 PageDataSize = DeviceInfo.wPageDataSize;
+	u32 PageSpareSize = DeviceInfo.wPageSpareSize;
+	u32 eccBytes = DeviceInfo.wECCBytesPerSector;
+	u32 spareFlagBytes = DeviceInfo.wNumPageSpareFlag;
+	u32 spareSkipBytes  = DeviceInfo.wSpareSkipBytes;
+	u32 eccSectorSize;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u8 *read_data_l = read_data;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u8 *page_main_spare = buf_read_page_main_spare;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	eccSectorSize = ECC_SECTOR_SIZE * (DeviceInfo.wDevicesConnected);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	if (status == PASS) {
+		intr_status = intr_status_addresses[flash_bank];
+
+		iowrite32(1, FlashReg + TRANSFER_SPARE_REG);
+
+		iowrite32(ioread32(FlashReg + intr_status),
+				FlashReg + intr_status);
+
+		while ((status != FAIL) && (page_count > 0)) {
+			flash_add = (u64)(block %
+				(DeviceInfo.wTotalBlocks / totalUsedBanks))
+				* DeviceInfo.wBlockDataSize +
+				(u64)page * DeviceInfo.wPageDataSize;
+
+			index_addr((u32)(MODE_10 | (flash_bank << 24) |
+				(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+				0x43);
+			index_addr((u32)(MODE_10 | (flash_bank << 24) |
+				(flash_add >> DeviceInfo.nBitsInPageDataSize)),
+				0x2000 | page_count);
+
+			while (!(ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__LOAD_COMP))
+				;
+
+			iowrite32((u32)(MODE_01 | (flash_bank << 24) |
+				(flash_add >>
+				DeviceInfo.nBitsInPageDataSize)),
+				FlashMem);
+
+			for (i = 0; i < PageSize / 4; i++)
+				*(((u32 *)page_main_spare) + i) =
+					ioread32(FlashMem + 0x10);
+
+			if (enable_ecc) {
+				for (i = PageDataSize;  i < PageSize -
+							spareSkipBytes; i++)
+					page_main_spare[i] = page_main_spare[i +
+								spareSkipBytes];
+
+				for (j = 0;
+				j < DeviceInfo.wPageDataSize / eccSectorSize;
+				j++) {
+
+					for (i = 0; i < eccSectorSize; i++)
+						read_data_l[eccSectorSize * j +
+							    i] =
+						    page_main_spare[
+							(eccSectorSize +
+							eccBytes) * j + i];
+
+					for (i = 0; i < eccBytes; i++)
+						read_data_l[PageDataSize +
+							    spareFlagBytes +
+							    eccBytes * j + i] =
+						    page_main_spare[
+							(eccSectorSize +
+							eccBytes) * j +
+							eccSectorSize + i];
+				}
+
+				for (i = 0; i < spareFlagBytes; i++)
+					read_data_l[PageDataSize + i] =
+					    page_main_spare[(eccSectorSize +
+							     eccBytes) * j + i];
+			} else {
+				for (i = 0; i < (PageDataSize + PageSpareSize);
+				     i++)
+					read_data_l[i] = page_main_spare[i];
+
+			}
+
+			if (enable_ecc) {
+				while (!(ioread32(FlashReg + intr_status) &
+					(INTR_STATUS0__ECC_TRANSACTION_DONE |
+					INTR_STATUS0__ECC_ERR)))
+					;
+
+				if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_ERR) {
+					iowrite32(INTR_STATUS0__ECC_ERR,
+						FlashReg + intr_status);
+					status = do_ecc_new(flash_bank,
+						read_data, block, page);
+				}
+
+				if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_TRANSACTION_DONE &
+					INTR_STATUS0__ECC_ERR) {
+					iowrite32(INTR_STATUS0__ECC_ERR |
+					INTR_STATUS0__ECC_TRANSACTION_DONE,
+					FlashReg + intr_status);
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_TRANSACTION_DONE) {
+					iowrite32(
+					INTR_STATUS0__ECC_TRANSACTION_DONE,
+					FlashReg + intr_status);
+				} else if (ioread32(FlashReg + intr_status) &
+					INTR_STATUS0__ECC_ERR) {
+					iowrite32(INTR_STATUS0__ECC_ERR,
+						FlashReg + intr_status);
+				}
+			}
+
+			page++;
+			page_count--;
+			read_data_l += PageSize;
+		}
+	}
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+
+	return status;
+}
+
+u16 NAND_Pipeline_Write_Ahead(u8 *write_data, u32 block,
+			u16 page, u16 page_count)
+{
+	u16 status = PASS;
+	u32 NumPages = page_count;
+	u64 flash_add;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	int ret;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+
+	if (page_count < 2)
+		status = FAIL;
+
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	intr_status = intr_status_addresses[flash_bank];
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	/* Fill the mrst_nand_info structure */
+	info.state = INT_PIPELINE_WRITE_AHEAD;
+	info.write_data = write_data;
+	info.flash_bank = flash_bank;
+	info.block = block;
+	info.page = page;
+	info.ret = PASS;
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+
+	ddma_trans(write_data, flash_add, flash_bank, 1, NumPages);
+
+	iowrite32(1, FlashReg + GLOBAL_INT_ENABLE); /* Enable interrupt */
+
+	ret = wait_for_completion_timeout(&info.complete, 10 * HZ);
+	if (!ret) {
+		printk(KERN_ERR "Wait for completion timeout "
+			"in %s, Line %d\n", __FILE__, __LINE__);
+		status = ERR;
+	} else {
+		status = info.ret;
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	return status;
+}
+
+/* Un-tested function */
+u16 NAND_Multiplane_Write(u8 *write_data, u32 block, u16 page,
+			     u16 page_count)
+{
+	u16 status = PASS;
+	u32 NumPages = page_count;
+	u64 flash_add;
+	u32 flash_bank;
+	u32 intr_status = 0;
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u16 status2 = PASS;
+	u32 t;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	status = Boundary_Check_Block_Page(block, page, page_count);
+	if (status != PASS)
+		return status;
+
+	flash_add = (u64)(block % (DeviceInfo.wTotalBlocks / totalUsedBanks))
+		* DeviceInfo.wBlockDataSize +
+		(u64)page * DeviceInfo.wPageDataSize;
+
+	flash_bank = block / (DeviceInfo.wTotalBlocks / totalUsedBanks);
+
+	intr_status = intr_status_addresses[flash_bank];
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+	iowrite32(0x01, FlashReg + MULTIPLANE_OPERATION);
+
+	iowrite32(1, FlashReg + DMA_ENABLE);
+	while (!(ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + TRANSFER_SPARE_REG);
+
+	index_addr((u32)(MODE_10 | (flash_bank << 24) |
+		(flash_add >> DeviceInfo.nBitsInPageDataSize)), 0x42);
+
+	ddma_trans(write_data, flash_add, flash_bank, 1, NumPages);
+
+	while (1) {
+		while (!ioread32(FlashReg + intr_status))
+			;
+
+		if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__DMA_CMD_COMP) {
+			iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+				FlashReg + intr_status);
+			status = PASS;
+			if (status2 == FAIL)
+				status = FAIL;
+			break;
+		} else if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__PROGRAM_FAIL) {
+			status2 = FAIL;
+			status = FAIL;
+			t = ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__PROGRAM_FAIL;
+			iowrite32(t, FlashReg + intr_status);
+		} else {
+			iowrite32((~INTR_STATUS0__PROGRAM_FAIL) &
+				(~INTR_STATUS0__DMA_CMD_COMP),
+				FlashReg + intr_status);
+		}
+	}
+
+	iowrite32(ioread32(FlashReg + intr_status), FlashReg + intr_status);
+
+	iowrite32(0, FlashReg + DMA_ENABLE);
+
+	while ((ioread32(FlashReg + DMA_ENABLE) & DMA_ENABLE__FLAG))
+		;
+
+	iowrite32(0, FlashReg + MULTIPLANE_OPERATION);
+
+	return status;
+}
+
+
+#if CMD_DMA
+static irqreturn_t cdma_isr(int irq, void *dev_id)
+{
+	struct mrst_nand_info *dev = dev_id;
+	int first_failed_cmd;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	if (!is_cdma_interrupt())
+		return IRQ_NONE;
+
+	/* Disable controller interrupts */
+	iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
+	GLOB_FTL_Event_Status(&first_failed_cmd);
+	complete(&dev->complete);
+
+	return IRQ_HANDLED;
+}
+#else
+static void handle_nand_int_read(struct mrst_nand_info *dev)
+{
+	u32 intr_status_addresses[4] = {INTR_STATUS0,
+		INTR_STATUS1, INTR_STATUS2, INTR_STATUS3};
+	u32 intr_status;
+	u32 ecc_done_OR_dma_comp = 0;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	dev->ret = PASS;
+	intr_status = intr_status_addresses[dev->flash_bank];
+
+	while (1) {
+		if (enable_ecc) {
+			if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__ECC_ERR) {
+				iowrite32(INTR_STATUS0__ECC_ERR,
+					FlashReg + intr_status);
+				dev->ret = do_ecc_new(dev->flash_bank,
+						dev->read_data,
+						dev->block, dev->page);
+			} else if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__DMA_CMD_COMP) {
+				iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+					FlashReg + intr_status);
+				if (1 == ecc_done_OR_dma_comp)
+					break;
+				ecc_done_OR_dma_comp = 1;
+			} else if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__ECC_TRANSACTION_DONE) {
+				iowrite32(INTR_STATUS0__ECC_TRANSACTION_DONE,
+					FlashReg + intr_status);
+				if (1 == ecc_done_OR_dma_comp)
+					break;
+				ecc_done_OR_dma_comp = 1;
+			}
+		} else {
+			if (ioread32(FlashReg + intr_status) &
+				INTR_STATUS0__DMA_CMD_COMP) {
+				iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+					FlashReg + intr_status);
+				break;
+			} else {
+				printk(KERN_ERR "Illegal INTS "
+					"(offset addr 0x%x) value: 0x%x\n",
+					intr_status,
+					ioread32(FlashReg + intr_status));
+			}
+		}
+
+		iowrite32((~INTR_STATUS0__ECC_ERR) &
+		(~INTR_STATUS0__ECC_TRANSACTION_DONE) &
+		(~INTR_STATUS0__DMA_CMD_COMP),
+		FlashReg + intr_status);
+	}
+}
+
+static void handle_nand_int_write(struct mrst_nand_info *dev)
+{
+	u32 intr_status;
+	u32 intr[4] = {INTR_STATUS0, INTR_STATUS1,
+		INTR_STATUS2, INTR_STATUS3};
+	int status = PASS;
+
+	nand_dbg_print(NAND_DBG_DEBUG, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	dev->ret = PASS;
+	intr_status = intr[dev->flash_bank];
+
+	while (1) {
+		while (!ioread32(FlashReg + intr_status))
+			;
+
+		if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__DMA_CMD_COMP) {
+			iowrite32(INTR_STATUS0__DMA_CMD_COMP,
+				FlashReg + intr_status);
+			if (FAIL == status)
+				dev->ret = FAIL;
+			break;
+		} else if (ioread32(FlashReg + intr_status) &
+			INTR_STATUS0__PROGRAM_FAIL) {
+			status = FAIL;
+			iowrite32(INTR_STATUS0__PROGRAM_FAIL,
+				FlashReg + intr_status);
+		} else {
+			iowrite32((~INTR_STATUS0__PROGRAM_FAIL) &
+				(~INTR_STATUS0__DMA_CMD_COMP),
+				FlashReg + intr_status);
+		}
+	}
+}
+
+static irqreturn_t ddma_isr(int irq, void *dev_id)
+{
+	struct mrst_nand_info *dev = dev_id;
+	u32 int_mask, ints0, ints1, ints2, ints3, ints_offset;
+	u32 intr[4] = {INTR_STATUS0, INTR_STATUS1,
+		INTR_STATUS2, INTR_STATUS3};
+
+	int_mask = INTR_STATUS0__DMA_CMD_COMP |
+		INTR_STATUS0__ECC_TRANSACTION_DONE |
+		INTR_STATUS0__ECC_ERR |
+		INTR_STATUS0__PROGRAM_FAIL |
+		INTR_STATUS0__ERASE_FAIL;
+
+	ints0 = ioread32(FlashReg + INTR_STATUS0);
+	ints1 = ioread32(FlashReg + INTR_STATUS1);
+	ints2 = ioread32(FlashReg + INTR_STATUS2);
+	ints3 = ioread32(FlashReg + INTR_STATUS3);
+
+	ints_offset = intr[dev->flash_bank];
+
+	nand_dbg_print(NAND_DBG_DEBUG,
+		"INTR0: 0x%x, INTR1: 0x%x, INTR2: 0x%x, INTR3: 0x%x, "
+		"DMA_INTR: 0x%x, "
+		"dev->state: 0x%x, dev->flash_bank: %d\n",
+		ints0, ints1, ints2, ints3,
+		ioread32(FlashReg + DMA_INTR),
+		dev->state, dev->flash_bank);
+
+	if (!(ioread32(FlashReg + ints_offset) & int_mask)) {
+		iowrite32(ints0, FlashReg + INTR_STATUS0);
+		iowrite32(ints1, FlashReg + INTR_STATUS1);
+		iowrite32(ints2, FlashReg + INTR_STATUS2);
+		iowrite32(ints3, FlashReg + INTR_STATUS3);
+		nand_dbg_print(NAND_DBG_WARN,
+			"ddma_isr: Invalid interrupt for NAND controller. "
+			"Ignore it\n");
+		return IRQ_NONE;
+	}
+
+	switch (dev->state) {
+	case INT_READ_PAGE_MAIN:
+	case INT_PIPELINE_READ_AHEAD:
+		/* Disable controller interrupts */
+		iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
+		handle_nand_int_read(dev);
+		break;
+	case INT_WRITE_PAGE_MAIN:
+	case INT_PIPELINE_WRITE_AHEAD:
+		iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
+		handle_nand_int_write(dev);
+		break;
+	default:
+		printk(KERN_ERR "ddma_isr - Illegal state: 0x%x\n",
+			dev->state);
+		return IRQ_NONE;
+	}
+
+	dev->state = INT_IDLE_STATE;
+	complete(&dev->complete);
+	return IRQ_HANDLED;
+}
+#endif
+
+static const struct pci_device_id nand_pci_ids[] = {
+	{
+	 .vendor = 0x8086,
+	 .device = 0x0809,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 },
+	{ /* end: all zeroes */ }
+};
+
+static int nand_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int ret = -ENODEV;
+	unsigned long csr_base;
+	unsigned long csr_len;
+	struct mrst_nand_info *pndev = &info;
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	ret = pci_enable_device(dev);
+	if (ret) {
+		printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
+		return ret;
+	}
+
+	pci_set_master(dev);
+	pndev->dev = dev;
+
+	csr_base = pci_resource_start(dev, 0);
+	if (!csr_base) {
+		printk(KERN_ERR "Spectra: pci_resource_start failed!\n");
+		return -ENODEV;
+	}
+
+	csr_len = pci_resource_len(dev, 0);
+	if (!csr_len) {
+		printk(KERN_ERR "Spectra: pci_resource_len failed!\n");
+		return -ENODEV;
+	}
+
+	ret = pci_request_regions(dev, SPECTRA_NAND_NAME);
+	if (ret) {
+		printk(KERN_ERR "Spectra: Unable to request "
+		       "memory region\n");
+		goto failed_req_csr;
+	}
+
+	pndev->ioaddr = ioremap_nocache(csr_base, csr_len);
+	if (!pndev->ioaddr) {
+		printk(KERN_ERR "Spectra: Unable to remap memory region\n");
+		ret = -ENOMEM;
+		goto failed_remap_csr;
+	}
+	nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08lx -> 0x%p (0x%lx)\n",
+		       csr_base, pndev->ioaddr, csr_len);
+
+	init_completion(&pndev->complete);
+	nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
+
+#if CMD_DMA
+	if (request_irq(dev->irq, cdma_isr, IRQF_SHARED,
+			SPECTRA_NAND_NAME, &info)) {
+		printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
+		ret = -ENODEV;
+		iounmap(pndev->ioaddr);
+		goto failed_remap_csr;
+	}
+#else
+	if (request_irq(dev->irq, ddma_isr, IRQF_SHARED,
+			SPECTRA_NAND_NAME, &info)) {
+		printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
+		ret = -ENODEV;
+		iounmap(pndev->ioaddr);
+		goto failed_remap_csr;
+	}
+#endif
+
+	pci_set_drvdata(dev, pndev);
+
+	return 0;
+
+failed_remap_csr:
+	pci_release_regions(dev);
+failed_req_csr:
+
+	return ret;
+}
+
+static void nand_pci_remove(struct pci_dev *dev)
+{
+	struct mrst_nand_info *pndev = pci_get_drvdata(dev);
+
+	nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+#if CMD_DMA
+	free_irq(dev->irq, pndev);
+#endif
+	iounmap(pndev->ioaddr);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+}
+
+MODULE_DEVICE_TABLE(pci, nand_pci_ids);
+
+static struct pci_driver nand_pci_driver = {
+	.name = SPECTRA_NAND_NAME,
+	.id_table = nand_pci_ids,
+	.probe = nand_pci_probe,
+	.remove = nand_pci_remove,
+};
+
+int NAND_Flash_Init(void)
+{
+	int retval;
+	u32 int_mask;
+
+	nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+		       __FILE__, __LINE__, __func__);
+
+	FlashReg = ioremap_nocache(GLOB_HWCTL_REG_BASE,
+			GLOB_HWCTL_REG_SIZE);
+	if (!FlashReg) {
+		printk(KERN_ERR "Spectra: ioremap_nocache failed!");
+		return -ENOMEM;
+	}
+	nand_dbg_print(NAND_DBG_WARN,
+		"Spectra: Remapped reg base address: "
+		"0x%p, len: %d\n",
+		FlashReg, GLOB_HWCTL_REG_SIZE);
+
+	FlashMem = ioremap_nocache(GLOB_HWCTL_MEM_BASE,
+			GLOB_HWCTL_MEM_SIZE);
+	if (!FlashMem) {
+		printk(KERN_ERR "Spectra: ioremap_nocache failed!");
+		iounmap(FlashReg);
+		return -ENOMEM;
+	}
+	nand_dbg_print(NAND_DBG_WARN,
+		"Spectra: Remapped flash base address: "
+		"0x%p, len: %d\n",
+		(void *)FlashMem, GLOB_HWCTL_MEM_SIZE);
+
+	nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
+			"acc_clks: %d, re_2_we: %d, we_2_re: %d,"
+			"addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+			"rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
+			ioread32(FlashReg + ACC_CLKS),
+			ioread32(FlashReg + RE_2_WE),
+			ioread32(FlashReg + WE_2_RE),
+			ioread32(FlashReg + ADDR_2_DATA),
+			ioread32(FlashReg + RDWR_EN_LO_CNT),
+			ioread32(FlashReg + RDWR_EN_HI_CNT),
+			ioread32(FlashReg + CS_SETUP_CNT));
+
+	NAND_Flash_Reset();
+
+	iowrite32(0, FlashReg + GLOBAL_INT_ENABLE);
+
+#if CMD_DMA
+	info.pcmds_num = 0;
+	info.flash_bank = 0;
+	info.cdma_num = 0;
+	int_mask = (DMA_INTR__DESC_COMP_CHANNEL0 |
+		DMA_INTR__DESC_COMP_CHANNEL1 |
+		DMA_INTR__DESC_COMP_CHANNEL2 |
+		DMA_INTR__DESC_COMP_CHANNEL3 |
+		DMA_INTR__MEMCOPY_DESC_COMP);
+	iowrite32(int_mask, FlashReg + DMA_INTR_EN);
+	iowrite32(0xFFFF, FlashReg + DMA_INTR);
+
+	int_mask = (INTR_STATUS0__ECC_ERR |
+		INTR_STATUS0__PROGRAM_FAIL |
+		INTR_STATUS0__ERASE_FAIL);
+#else
+	int_mask = INTR_STATUS0__DMA_CMD_COMP |
+		INTR_STATUS0__ECC_TRANSACTION_DONE |
+		INTR_STATUS0__ECC_ERR |
+		INTR_STATUS0__PROGRAM_FAIL |
+		INTR_STATUS0__ERASE_FAIL;
+#endif
+	iowrite32(int_mask, FlashReg + INTR_EN0);
+	iowrite32(int_mask, FlashReg + INTR_EN1);
+	iowrite32(int_mask, FlashReg + INTR_EN2);
+	iowrite32(int_mask, FlashReg + INTR_EN3);
+
+	/* Clear all status bits */
+	iowrite32(0xFFFF, FlashReg + INTR_STATUS0);
+	iowrite32(0xFFFF, FlashReg + INTR_STATUS1);
+	iowrite32(0xFFFF, FlashReg + INTR_STATUS2);
+	iowrite32(0xFFFF, FlashReg + INTR_STATUS3);
+
+	iowrite32(0x0F, FlashReg + RB_PIN_ENABLED);
+	iowrite32(CHIP_EN_DONT_CARE__FLAG, FlashReg + CHIP_ENABLE_DONT_CARE);
+
+	/* Should set value for these registers when init */
+	iowrite32(0, FlashReg + TWO_ROW_ADDR_CYCLES);
+	iowrite32(1, FlashReg + ECC_ENABLE);
+	enable_ecc = 1;
+
+	retval = pci_register_driver(&nand_pci_driver);
+	if (retval)
+		return -ENOMEM;
+
+	return PASS;
+}
+
+/* Free memory */
+int nand_release_spectra(void)
+{
+	pci_unregister_driver(&nand_pci_driver);
+	iounmap(FlashMem);
+	iounmap(FlashReg);
+
+	return 0;
+}
+
+
+
diff --git a/drivers/staging/spectra/lld_nand.h b/drivers/staging/spectra/lld_nand.h
new file mode 100644
index 00000000000..d08388287da
--- /dev/null
+++ b/drivers/staging/spectra/lld_nand.h
@@ -0,0 +1,131 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _LLD_NAND_
+#define _LLD_NAND_
+
+#ifdef ELDORA
+#include "defs.h"
+#else
+#include "flash.h"
+#include "ffsport.h"
+#endif
+
+#define MODE_00    0x00000000
+#define MODE_01    0x04000000
+#define MODE_10    0x08000000
+#define MODE_11    0x0C000000
+
+
+#define DATA_TRANSFER_MODE              0
+#define PROTECTION_PER_BLOCK            1
+#define LOAD_WAIT_COUNT                 2
+#define PROGRAM_WAIT_COUNT              3
+#define ERASE_WAIT_COUNT                4
+#define INT_MONITOR_CYCLE_COUNT         5
+#define READ_BUSY_PIN_ENABLED           6
+#define MULTIPLANE_OPERATION_SUPPORT    7
+#define PRE_FETCH_MODE                  8
+#define CE_DONT_CARE_SUPPORT            9
+#define COPYBACK_SUPPORT                10
+#define CACHE_WRITE_SUPPORT             11
+#define CACHE_READ_SUPPORT              12
+#define NUM_PAGES_IN_BLOCK              13
+#define ECC_ENABLE_SELECT               14
+#define WRITE_ENABLE_2_READ_ENABLE      15
+#define ADDRESS_2_DATA                  16
+#define READ_ENABLE_2_WRITE_ENABLE      17
+#define TWO_ROW_ADDRESS_CYCLES          18
+#define MULTIPLANE_ADDRESS_RESTRICT     19
+#define ACC_CLOCKS                      20
+#define READ_WRITE_ENABLE_LOW_COUNT     21
+#define READ_WRITE_ENABLE_HIGH_COUNT    22
+
+#define ECC_SECTOR_SIZE     512
+#define LLD_MAX_FLASH_BANKS     4
+
+struct mrst_nand_info {
+	struct pci_dev *dev;
+	u32 state;
+	u32 flash_bank;
+	u8 *read_data;
+	u8 *write_data;
+	u32 block;
+	u16 page;
+	u32 use_dma;
+	void __iomem *ioaddr;  /* Mapped io reg base address */
+	int ret;
+	u32 pcmds_num;
+	struct pending_cmd *pcmds;
+	int cdma_num;           /* CDMA descriptor number in this chan */
+	u8 *cdma_desc_buf;	/* CDMA descriptor table */
+	u8 *memcp_desc_buf;	/* Memory copy descriptor table */
+	dma_addr_t cdma_desc;	/* Mapped CDMA descriptor table */
+	dma_addr_t memcp_desc;	/* Mapped memory copy descriptor table */
+	struct completion complete;
+};
+
+int NAND_Flash_Init(void);
+int nand_release_spectra(void);
+u16  NAND_Flash_Reset(void);
+u16  NAND_Read_Device_ID(void);
+u16  NAND_Erase_Block(u32 flash_add);
+u16  NAND_Write_Page_Main(u8 *write_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_Read_Page_Main(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_UnlockArrayAll(void);
+u16  NAND_Write_Page_Main_Spare(u8 *write_data, u32 block,
+				u16 page, u16 page_count);
+u16  NAND_Write_Page_Spare(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_Read_Page_Main_Spare(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_Read_Page_Spare(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+void NAND_LLD_Enable_Disable_Interrupts(u16 INT_ENABLE);
+u16  NAND_Get_Bad_Block(u32 block);
+u16  NAND_Pipeline_Read_Ahead(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_Pipeline_Write_Ahead(u8 *write_data, u32 block,
+				u16 page, u16 page_count);
+u16  NAND_Multiplane_Read(u8 *read_data, u32 block, u16 page,
+				u16 page_count);
+u16  NAND_Multiplane_Write(u8 *write_data, u32 block, u16 page,
+				u16 page_count);
+void NAND_ECC_Ctrl(int enable);
+u16 NAND_Read_Page_Main_Polling(u8 *read_data,
+		u32 block, u16 page, u16 page_count);
+u16 NAND_Pipeline_Read_Ahead_Polling(u8 *read_data,
+			u32 block, u16 page, u16 page_count);
+void Conv_Spare_Data_Log2Phy_Format(u8 *data);
+void Conv_Spare_Data_Phy2Log_Format(u8 *data);
+void Conv_Main_Spare_Data_Log2Phy_Format(u8 *data, u16 page_count);
+void Conv_Main_Spare_Data_Phy2Log_Format(u8 *data, u16 page_count);
+
+extern void __iomem *FlashReg;
+extern void __iomem *FlashMem;
+
+extern int totalUsedBanks;
+extern u32 GLOB_valid_banks[LLD_MAX_FLASH_BANKS];
+
+#endif /*_LLD_NAND_*/
+
+
+
diff --git a/drivers/staging/spectra/nand_regs.h b/drivers/staging/spectra/nand_regs.h
new file mode 100644
index 00000000000..e192e4ae8c1
--- /dev/null
+++ b/drivers/staging/spectra/nand_regs.h
@@ -0,0 +1,619 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#define DEVICE_RESET				0x0
+#define     DEVICE_RESET__BANK0				0x0001
+#define     DEVICE_RESET__BANK1				0x0002
+#define     DEVICE_RESET__BANK2				0x0004
+#define     DEVICE_RESET__BANK3				0x0008
+
+#define TRANSFER_SPARE_REG			0x10
+#define     TRANSFER_SPARE_REG__FLAG			0x0001
+
+#define LOAD_WAIT_CNT				0x20
+#define     LOAD_WAIT_CNT__VALUE				0xffff
+
+#define PROGRAM_WAIT_CNT			0x30
+#define     PROGRAM_WAIT_CNT__VALUE			0xffff
+
+#define ERASE_WAIT_CNT				0x40
+#define     ERASE_WAIT_CNT__VALUE			0xffff
+
+#define INT_MON_CYCCNT				0x50
+#define     INT_MON_CYCCNT__VALUE			0xffff
+
+#define RB_PIN_ENABLED				0x60
+#define     RB_PIN_ENABLED__BANK0			0x0001
+#define     RB_PIN_ENABLED__BANK1			0x0002
+#define     RB_PIN_ENABLED__BANK2			0x0004
+#define     RB_PIN_ENABLED__BANK3			0x0008
+
+#define MULTIPLANE_OPERATION			0x70
+#define     MULTIPLANE_OPERATION__FLAG			0x0001
+
+#define MULTIPLANE_READ_ENABLE			0x80
+#define     MULTIPLANE_READ_ENABLE__FLAG		0x0001
+
+#define COPYBACK_DISABLE			0x90
+#define     COPYBACK_DISABLE__FLAG			0x0001
+
+#define CACHE_WRITE_ENABLE			0xa0
+#define     CACHE_WRITE_ENABLE__FLAG			0x0001
+
+#define CACHE_READ_ENABLE			0xb0
+#define     CACHE_READ_ENABLE__FLAG			0x0001
+
+#define PREFETCH_MODE				0xc0
+#define     PREFETCH_MODE__PREFETCH_EN			0x0001
+#define     PREFETCH_MODE__PREFETCH_BURST_LENGTH	0xfff0
+
+#define CHIP_ENABLE_DONT_CARE			0xd0
+#define     CHIP_EN_DONT_CARE__FLAG			0x01
+
+#define ECC_ENABLE				0xe0
+#define     ECC_ENABLE__FLAG				0x0001
+
+#define GLOBAL_INT_ENABLE			0xf0
+#define     GLOBAL_INT_EN_FLAG				0x01
+
+#define WE_2_RE					0x100
+#define     WE_2_RE__VALUE				0x003f
+
+#define ADDR_2_DATA				0x110
+#define     ADDR_2_DATA__VALUE				0x003f
+
+#define RE_2_WE					0x120
+#define     RE_2_WE__VALUE				0x003f
+
+#define ACC_CLKS    				0x130
+#define     ACC_CLKS__VALUE				0x000f
+
+#define NUMBER_OF_PLANES			0x140
+#define     NUMBER_OF_PLANES__VALUE			0x0007
+
+#define PAGES_PER_BLOCK				0x150
+#define     PAGES_PER_BLOCK__VALUE			0xffff
+
+#define DEVICE_WIDTH				0x160
+#define     DEVICE_WIDTH__VALUE				0x0003
+
+#define DEVICE_MAIN_AREA_SIZE			0x170
+#define     DEVICE_MAIN_AREA_SIZE__VALUE		0xffff
+
+#define DEVICE_SPARE_AREA_SIZE			0x180
+#define     DEVICE_SPARE_AREA_SIZE__VALUE		0xffff
+
+#define TWO_ROW_ADDR_CYCLES			0x190
+#define     TWO_ROW_ADDR_CYCLES__FLAG			0x0001
+
+#define MULTIPLANE_ADDR_RESTRICT		0x1a0
+#define     MULTIPLANE_ADDR_RESTRICT__FLAG		0x0001
+
+#define ECC_CORRECTION				0x1b0
+#define     ECC_CORRECTION__VALUE			0x001f
+
+#define READ_MODE				0x1c0
+#define     READ_MODE__VALUE				0x000f
+
+#define WRITE_MODE				0x1d0
+#define     WRITE_MODE__VALUE				0x000f
+
+#define COPYBACK_MODE				0x1e0
+#define     COPYBACK_MODE__VALUE			0x000f
+
+#define RDWR_EN_LO_CNT				0x1f0
+#define     RDWR_EN_LO_CNT__VALUE			0x001f
+
+#define RDWR_EN_HI_CNT				0x200
+#define     RDWR_EN_HI_CNT__VALUE			0x001f
+
+#define MAX_RD_DELAY				0x210
+#define     MAX_RD_DELAY__VALUE				0x000f
+
+#define CS_SETUP_CNT				0x220
+#define     CS_SETUP_CNT__VALUE				0x001f
+
+#define SPARE_AREA_SKIP_BYTES			0x230
+#define     SPARE_AREA_SKIP_BYTES__VALUE		0x003f
+
+#define SPARE_AREA_MARKER			0x240
+#define     SPARE_AREA_MARKER__VALUE			0xffff
+
+#define DEVICES_CONNECTED			0x250
+#define     DEVICES_CONNECTED__VALUE			0x0007
+
+#define DIE_MASK					0x260
+#define     DIE_MASK__VALUE				0x00ff
+
+#define FIRST_BLOCK_OF_NEXT_PLANE		0x270
+#define     FIRST_BLOCK_OF_NEXT_PLANE__VALUE		0xffff
+
+#define WRITE_PROTECT				0x280
+#define     WRITE_PROTECT__FLAG				0x0001
+
+#define RE_2_RE					0x290
+#define     RE_2_RE__VALUE				0x003f
+
+#define MANUFACTURER_ID			0x300
+#define     MANUFACTURER_ID__VALUE			0x00ff
+
+#define DEVICE_ID				0x310
+#define     DEVICE_ID__VALUE				0x00ff
+
+#define DEVICE_PARAM_0				0x320
+#define     DEVICE_PARAM_0__VALUE			0x00ff
+
+#define DEVICE_PARAM_1				0x330
+#define     DEVICE_PARAM_1__VALUE			0x00ff
+
+#define DEVICE_PARAM_2				0x340
+#define     DEVICE_PARAM_2__VALUE			0x00ff
+
+#define LOGICAL_PAGE_DATA_SIZE			0x350
+#define     LOGICAL_PAGE_DATA_SIZE__VALUE		0xffff
+
+#define LOGICAL_PAGE_SPARE_SIZE			0x360
+#define     LOGICAL_PAGE_SPARE_SIZE__VALUE		0xffff
+
+#define REVISION					0x370
+#define     REVISION__VALUE				0xffff
+
+#define ONFI_DEVICE_FEATURES			0x380
+#define     ONFI_DEVICE_FEATURES__VALUE			0x003f
+
+#define ONFI_OPTIONAL_COMMANDS		0x390
+#define     ONFI_OPTIONAL_COMMANDS__VALUE		0x003f
+
+#define ONFI_TIMING_MODE			0x3a0
+#define     ONFI_TIMING_MODE__VALUE			0x003f
+
+#define ONFI_PGM_CACHE_TIMING_MODE		0x3b0
+#define     ONFI_PGM_CACHE_TIMING_MODE__VALUE		0x003f
+
+#define ONFI_DEVICE_NO_OF_LUNS			0x3c0
+#define     ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS		0x00ff
+#define     ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE		0x0100
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L	0x3d0
+#define     ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE	0xffff
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U	0x3e0
+#define     ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE	0xffff
+
+#define FEATURES					0x3f0
+#define     FEATURES__N_BANKS				0x0003
+#define     FEATURES__ECC_MAX_ERR			0x003c
+#define     FEATURES__DMA					0x0040
+#define     FEATURES__CMD_DMA				0x0080
+#define     FEATURES__PARTITION				0x0100
+#define     FEATURES__XDMA_SIDEBAND			0x0200
+#define     FEATURES__GPREG				0x0400
+#define     FEATURES__INDEX_ADDR				0x0800
+
+#define TRANSFER_MODE				0x400
+#define     TRANSFER_MODE__VALUE			0x0003
+
+#define INTR_STATUS0				0x410
+#define     INTR_STATUS0__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_STATUS0__ECC_ERR			0x0002
+#define     INTR_STATUS0__DMA_CMD_COMP			0x0004
+#define     INTR_STATUS0__TIME_OUT			0x0008
+#define     INTR_STATUS0__PROGRAM_FAIL			0x0010
+#define     INTR_STATUS0__ERASE_FAIL			0x0020
+#define     INTR_STATUS0__LOAD_COMP			0x0040
+#define     INTR_STATUS0__PROGRAM_COMP			0x0080
+#define     INTR_STATUS0__ERASE_COMP			0x0100
+#define     INTR_STATUS0__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_STATUS0__LOCKED_BLK			0x0400
+#define     INTR_STATUS0__UNSUP_CMD			0x0800
+#define     INTR_STATUS0__INT_ACT			0x1000
+#define     INTR_STATUS0__RST_COMP			0x2000
+#define     INTR_STATUS0__PIPE_CMD_ERR			0x4000
+#define     INTR_STATUS0__PAGE_XFER_INC			0x8000
+
+#define INTR_EN0					0x420
+#define     INTR_EN0__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_EN0__ECC_ERR				0x0002
+#define     INTR_EN0__DMA_CMD_COMP			0x0004
+#define     INTR_EN0__TIME_OUT				0x0008
+#define     INTR_EN0__PROGRAM_FAIL			0x0010
+#define     INTR_EN0__ERASE_FAIL				0x0020
+#define     INTR_EN0__LOAD_COMP				0x0040
+#define     INTR_EN0__PROGRAM_COMP			0x0080
+#define     INTR_EN0__ERASE_COMP				0x0100
+#define     INTR_EN0__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_EN0__LOCKED_BLK				0x0400
+#define     INTR_EN0__UNSUP_CMD				0x0800
+#define     INTR_EN0__INT_ACT				0x1000
+#define     INTR_EN0__RST_COMP				0x2000
+#define     INTR_EN0__PIPE_CMD_ERR			0x4000
+#define     INTR_EN0__PAGE_XFER_INC			0x8000
+
+#define PAGE_CNT0				0x430
+#define     PAGE_CNT0__VALUE				0x00ff
+
+#define ERR_PAGE_ADDR0				0x440
+#define     ERR_PAGE_ADDR0__VALUE			0xffff
+
+#define ERR_BLOCK_ADDR0			0x450
+#define     ERR_BLOCK_ADDR0__VALUE			0xffff
+
+#define INTR_STATUS1				0x460
+#define     INTR_STATUS1__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_STATUS1__ECC_ERR			0x0002
+#define     INTR_STATUS1__DMA_CMD_COMP			0x0004
+#define     INTR_STATUS1__TIME_OUT			0x0008
+#define     INTR_STATUS1__PROGRAM_FAIL			0x0010
+#define     INTR_STATUS1__ERASE_FAIL			0x0020
+#define     INTR_STATUS1__LOAD_COMP			0x0040
+#define     INTR_STATUS1__PROGRAM_COMP			0x0080
+#define     INTR_STATUS1__ERASE_COMP			0x0100
+#define     INTR_STATUS1__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_STATUS1__LOCKED_BLK			0x0400
+#define     INTR_STATUS1__UNSUP_CMD			0x0800
+#define     INTR_STATUS1__INT_ACT			0x1000
+#define     INTR_STATUS1__RST_COMP			0x2000
+#define     INTR_STATUS1__PIPE_CMD_ERR			0x4000
+#define     INTR_STATUS1__PAGE_XFER_INC			0x8000
+
+#define INTR_EN1					0x470
+#define     INTR_EN1__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_EN1__ECC_ERR				0x0002
+#define     INTR_EN1__DMA_CMD_COMP			0x0004
+#define     INTR_EN1__TIME_OUT				0x0008
+#define     INTR_EN1__PROGRAM_FAIL			0x0010
+#define     INTR_EN1__ERASE_FAIL				0x0020
+#define     INTR_EN1__LOAD_COMP				0x0040
+#define     INTR_EN1__PROGRAM_COMP			0x0080
+#define     INTR_EN1__ERASE_COMP				0x0100
+#define     INTR_EN1__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_EN1__LOCKED_BLK				0x0400
+#define     INTR_EN1__UNSUP_CMD				0x0800
+#define     INTR_EN1__INT_ACT				0x1000
+#define     INTR_EN1__RST_COMP				0x2000
+#define     INTR_EN1__PIPE_CMD_ERR			0x4000
+#define     INTR_EN1__PAGE_XFER_INC			0x8000
+
+#define PAGE_CNT1				0x480
+#define     PAGE_CNT1__VALUE				0x00ff
+
+#define ERR_PAGE_ADDR1				0x490
+#define     ERR_PAGE_ADDR1__VALUE			0xffff
+
+#define ERR_BLOCK_ADDR1			0x4a0
+#define     ERR_BLOCK_ADDR1__VALUE			0xffff
+
+#define INTR_STATUS2				0x4b0
+#define     INTR_STATUS2__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_STATUS2__ECC_ERR			0x0002
+#define     INTR_STATUS2__DMA_CMD_COMP			0x0004
+#define     INTR_STATUS2__TIME_OUT			0x0008
+#define     INTR_STATUS2__PROGRAM_FAIL			0x0010
+#define     INTR_STATUS2__ERASE_FAIL			0x0020
+#define     INTR_STATUS2__LOAD_COMP			0x0040
+#define     INTR_STATUS2__PROGRAM_COMP			0x0080
+#define     INTR_STATUS2__ERASE_COMP			0x0100
+#define     INTR_STATUS2__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_STATUS2__LOCKED_BLK			0x0400
+#define     INTR_STATUS2__UNSUP_CMD			0x0800
+#define     INTR_STATUS2__INT_ACT			0x1000
+#define     INTR_STATUS2__RST_COMP			0x2000
+#define     INTR_STATUS2__PIPE_CMD_ERR			0x4000
+#define     INTR_STATUS2__PAGE_XFER_INC			0x8000
+
+#define INTR_EN2					0x4c0
+#define     INTR_EN2__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_EN2__ECC_ERR				0x0002
+#define     INTR_EN2__DMA_CMD_COMP			0x0004
+#define     INTR_EN2__TIME_OUT				0x0008
+#define     INTR_EN2__PROGRAM_FAIL			0x0010
+#define     INTR_EN2__ERASE_FAIL				0x0020
+#define     INTR_EN2__LOAD_COMP				0x0040
+#define     INTR_EN2__PROGRAM_COMP			0x0080
+#define     INTR_EN2__ERASE_COMP				0x0100
+#define     INTR_EN2__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_EN2__LOCKED_BLK				0x0400
+#define     INTR_EN2__UNSUP_CMD				0x0800
+#define     INTR_EN2__INT_ACT				0x1000
+#define     INTR_EN2__RST_COMP				0x2000
+#define     INTR_EN2__PIPE_CMD_ERR			0x4000
+#define     INTR_EN2__PAGE_XFER_INC			0x8000
+
+#define PAGE_CNT2				0x4d0
+#define     PAGE_CNT2__VALUE				0x00ff
+
+#define ERR_PAGE_ADDR2				0x4e0
+#define     ERR_PAGE_ADDR2__VALUE			0xffff
+
+#define ERR_BLOCK_ADDR2			0x4f0
+#define     ERR_BLOCK_ADDR2__VALUE			0xffff
+
+#define INTR_STATUS3				0x500
+#define     INTR_STATUS3__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_STATUS3__ECC_ERR			0x0002
+#define     INTR_STATUS3__DMA_CMD_COMP			0x0004
+#define     INTR_STATUS3__TIME_OUT			0x0008
+#define     INTR_STATUS3__PROGRAM_FAIL			0x0010
+#define     INTR_STATUS3__ERASE_FAIL			0x0020
+#define     INTR_STATUS3__LOAD_COMP			0x0040
+#define     INTR_STATUS3__PROGRAM_COMP			0x0080
+#define     INTR_STATUS3__ERASE_COMP			0x0100
+#define     INTR_STATUS3__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_STATUS3__LOCKED_BLK			0x0400
+#define     INTR_STATUS3__UNSUP_CMD			0x0800
+#define     INTR_STATUS3__INT_ACT			0x1000
+#define     INTR_STATUS3__RST_COMP			0x2000
+#define     INTR_STATUS3__PIPE_CMD_ERR			0x4000
+#define     INTR_STATUS3__PAGE_XFER_INC			0x8000
+
+#define INTR_EN3					0x510
+#define     INTR_EN3__ECC_TRANSACTION_DONE		0x0001
+#define     INTR_EN3__ECC_ERR				0x0002
+#define     INTR_EN3__DMA_CMD_COMP			0x0004
+#define     INTR_EN3__TIME_OUT				0x0008
+#define     INTR_EN3__PROGRAM_FAIL			0x0010
+#define     INTR_EN3__ERASE_FAIL				0x0020
+#define     INTR_EN3__LOAD_COMP				0x0040
+#define     INTR_EN3__PROGRAM_COMP			0x0080
+#define     INTR_EN3__ERASE_COMP				0x0100
+#define     INTR_EN3__PIPE_CPYBCK_CMD_COMP		0x0200
+#define     INTR_EN3__LOCKED_BLK				0x0400
+#define     INTR_EN3__UNSUP_CMD				0x0800
+#define     INTR_EN3__INT_ACT				0x1000
+#define     INTR_EN3__RST_COMP				0x2000
+#define     INTR_EN3__PIPE_CMD_ERR			0x4000
+#define     INTR_EN3__PAGE_XFER_INC			0x8000
+
+#define PAGE_CNT3				0x520
+#define     PAGE_CNT3__VALUE				0x00ff
+
+#define ERR_PAGE_ADDR3				0x530
+#define     ERR_PAGE_ADDR3__VALUE			0xffff
+
+#define ERR_BLOCK_ADDR3			0x540
+#define     ERR_BLOCK_ADDR3__VALUE			0xffff
+
+#define DATA_INTR				0x550
+#define     DATA_INTR__WRITE_SPACE_AV			0x0001
+#define     DATA_INTR__READ_DATA_AV			0x0002
+
+#define DATA_INTR_EN				0x560
+#define     DATA_INTR_EN__WRITE_SPACE_AV		0x0001
+#define     DATA_INTR_EN__READ_DATA_AV			0x0002
+
+#define GPREG_0					0x570
+#define     GPREG_0__VALUE				0xffff
+
+#define GPREG_1					0x580
+#define     GPREG_1__VALUE				0xffff
+
+#define GPREG_2					0x590
+#define     GPREG_2__VALUE				0xffff
+
+#define GPREG_3					0x5a0
+#define     GPREG_3__VALUE				0xffff
+
+#define ECC_THRESHOLD				0x600
+#define     ECC_THRESHOLD__VALUE				0x03ff
+
+#define ECC_ERROR_BLOCK_ADDRESS		0x610
+#define     ECC_ERROR_BLOCK_ADDRESS__VALUE		0xffff
+
+#define ECC_ERROR_PAGE_ADDRESS			0x620
+#define     ECC_ERROR_PAGE_ADDRESS__VALUE		0x0fff
+#define     ECC_ERROR_PAGE_ADDRESS__BANK		0xf000
+
+#define ECC_ERROR_ADDRESS			0x630
+#define     ECC_ERROR_ADDRESS__OFFSET			0x0fff
+#define     ECC_ERROR_ADDRESS__SECTOR_NR		0xf000
+
+#define ERR_CORRECTION_INFO			0x640
+#define     ERR_CORRECTION_INFO__BYTEMASK		0x00ff
+#define     ERR_CORRECTION_INFO__DEVICE_NR		0x0f00
+#define     ERR_CORRECTION_INFO__ERROR_TYPE		0x4000
+#define     ERR_CORRECTION_INFO__LAST_ERR_INFO		0x8000
+
+#define DMA_ENABLE				0x700
+#define     DMA_ENABLE__FLAG				0x0001
+
+#define IGNORE_ECC_DONE				0x710
+#define     IGNORE_ECC_DONE__FLAG			0x0001
+
+#define DMA_INTR				0x720
+#define     DMA_INTR__TARGET_ERROR			0x0001
+#define     DMA_INTR__DESC_COMP_CHANNEL0		0x0002
+#define     DMA_INTR__DESC_COMP_CHANNEL1		0x0004
+#define     DMA_INTR__DESC_COMP_CHANNEL2		0x0008
+#define     DMA_INTR__DESC_COMP_CHANNEL3		0x0010
+#define     DMA_INTR__MEMCOPY_DESC_COMP		0x0020
+
+#define DMA_INTR_EN				0x730
+#define     DMA_INTR_EN__TARGET_ERROR			0x0001
+#define     DMA_INTR_EN__DESC_COMP_CHANNEL0		0x0002
+#define     DMA_INTR_EN__DESC_COMP_CHANNEL1		0x0004
+#define     DMA_INTR_EN__DESC_COMP_CHANNEL2		0x0008
+#define     DMA_INTR_EN__DESC_COMP_CHANNEL3		0x0010
+#define     DMA_INTR_EN__MEMCOPY_DESC_COMP		0x0020
+
+#define TARGET_ERR_ADDR_LO			0x740
+#define     TARGET_ERR_ADDR_LO__VALUE			0xffff
+
+#define TARGET_ERR_ADDR_HI			0x750
+#define     TARGET_ERR_ADDR_HI__VALUE			0xffff
+
+#define CHNL_ACTIVE				0x760
+#define     CHNL_ACTIVE__CHANNEL0			0x0001
+#define     CHNL_ACTIVE__CHANNEL1			0x0002
+#define     CHNL_ACTIVE__CHANNEL2			0x0004
+#define     CHNL_ACTIVE__CHANNEL3			0x0008
+
+#define ACTIVE_SRC_ID				0x800
+#define     ACTIVE_SRC_ID__VALUE				0x00ff
+
+#define PTN_INTR					0x810
+#define     PTN_INTR__CONFIG_ERROR			0x0001
+#define     PTN_INTR__ACCESS_ERROR_BANK0		0x0002
+#define     PTN_INTR__ACCESS_ERROR_BANK1		0x0004
+#define     PTN_INTR__ACCESS_ERROR_BANK2		0x0008
+#define     PTN_INTR__ACCESS_ERROR_BANK3		0x0010
+#define     PTN_INTR__REG_ACCESS_ERROR			0x0020
+
+#define PTN_INTR_EN				0x820
+#define     PTN_INTR_EN__CONFIG_ERROR			0x0001
+#define     PTN_INTR_EN__ACCESS_ERROR_BANK0		0x0002
+#define     PTN_INTR_EN__ACCESS_ERROR_BANK1		0x0004
+#define     PTN_INTR_EN__ACCESS_ERROR_BANK2		0x0008
+#define     PTN_INTR_EN__ACCESS_ERROR_BANK3		0x0010
+#define     PTN_INTR_EN__REG_ACCESS_ERROR		0x0020
+
+#define PERM_SRC_ID_0				0x830
+#define     PERM_SRC_ID_0__SRCID				0x00ff
+#define     PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_0__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_0__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_0__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_0				0x840
+#define     MIN_BLK_ADDR_0__VALUE			0xffff
+
+#define MAX_BLK_ADDR_0				0x850
+#define     MAX_BLK_ADDR_0__VALUE			0xffff
+
+#define MIN_MAX_BANK_0				0x860
+#define     MIN_MAX_BANK_0__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_0__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_1				0x870
+#define     PERM_SRC_ID_1__SRCID				0x00ff
+#define     PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_1__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_1__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_1__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_1				0x880
+#define     MIN_BLK_ADDR_1__VALUE			0xffff
+
+#define MAX_BLK_ADDR_1				0x890
+#define     MAX_BLK_ADDR_1__VALUE			0xffff
+
+#define MIN_MAX_BANK_1				0x8a0
+#define     MIN_MAX_BANK_1__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_1__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_2				0x8b0
+#define     PERM_SRC_ID_2__SRCID				0x00ff
+#define     PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_2__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_2__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_2__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_2				0x8c0
+#define     MIN_BLK_ADDR_2__VALUE			0xffff
+
+#define MAX_BLK_ADDR_2				0x8d0
+#define     MAX_BLK_ADDR_2__VALUE			0xffff
+
+#define MIN_MAX_BANK_2				0x8e0
+#define     MIN_MAX_BANK_2__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_2__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_3				0x8f0
+#define     PERM_SRC_ID_3__SRCID				0x00ff
+#define     PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_3__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_3__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_3__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_3				0x900
+#define     MIN_BLK_ADDR_3__VALUE			0xffff
+
+#define MAX_BLK_ADDR_3				0x910
+#define     MAX_BLK_ADDR_3__VALUE			0xffff
+
+#define MIN_MAX_BANK_3				0x920
+#define     MIN_MAX_BANK_3__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_3__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_4				0x930
+#define     PERM_SRC_ID_4__SRCID				0x00ff
+#define     PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_4__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_4__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_4__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_4				0x940
+#define     MIN_BLK_ADDR_4__VALUE			0xffff
+
+#define MAX_BLK_ADDR_4				0x950
+#define     MAX_BLK_ADDR_4__VALUE			0xffff
+
+#define MIN_MAX_BANK_4				0x960
+#define     MIN_MAX_BANK_4__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_4__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_5				0x970
+#define     PERM_SRC_ID_5__SRCID				0x00ff
+#define     PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_5__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_5__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_5__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_5				0x980
+#define     MIN_BLK_ADDR_5__VALUE			0xffff
+
+#define MAX_BLK_ADDR_5				0x990
+#define     MAX_BLK_ADDR_5__VALUE			0xffff
+
+#define MIN_MAX_BANK_5				0x9a0
+#define     MIN_MAX_BANK_5__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_5__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_6				0x9b0
+#define     PERM_SRC_ID_6__SRCID				0x00ff
+#define     PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_6__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_6__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_6__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_6				0x9c0
+#define     MIN_BLK_ADDR_6__VALUE			0xffff
+
+#define MAX_BLK_ADDR_6				0x9d0
+#define     MAX_BLK_ADDR_6__VALUE			0xffff
+
+#define MIN_MAX_BANK_6				0x9e0
+#define     MIN_MAX_BANK_6__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_6__MAX_VALUE			0x000c
+
+#define PERM_SRC_ID_7				0x9f0
+#define     PERM_SRC_ID_7__SRCID				0x00ff
+#define     PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE		0x0800
+#define     PERM_SRC_ID_7__WRITE_ACTIVE			0x2000
+#define     PERM_SRC_ID_7__READ_ACTIVE			0x4000
+#define     PERM_SRC_ID_7__PARTITION_VALID		0x8000
+
+#define MIN_BLK_ADDR_7				0xa00
+#define     MIN_BLK_ADDR_7__VALUE			0xffff
+
+#define MAX_BLK_ADDR_7				0xa10
+#define     MAX_BLK_ADDR_7__VALUE			0xffff
+
+#define MIN_MAX_BANK_7				0xa20
+#define     MIN_MAX_BANK_7__MIN_VALUE			0x0003
+#define     MIN_MAX_BANK_7__MAX_VALUE			0x000c
diff --git a/drivers/staging/spectra/spectraswconfig.h b/drivers/staging/spectra/spectraswconfig.h
new file mode 100644
index 00000000000..17259469e95
--- /dev/null
+++ b/drivers/staging/spectra/spectraswconfig.h
@@ -0,0 +1,82 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _SPECTRASWCONFIG_
+#define _SPECTRASWCONFIG_
+
+/* NAND driver version */
+#define GLOB_VERSION          "driver version 20100311"
+
+
+/***** Common Parameters *****/
+#define RETRY_TIMES                   3
+
+#define READ_BADBLOCK_INFO            1
+#define READBACK_VERIFY               0
+#define AUTO_FORMAT_FLASH             0
+
+/***** Cache Parameters *****/
+#define CACHE_ITEM_NUM            128
+#define BLK_NUM_FOR_L2_CACHE        16
+
+/***** Block Table Parameters *****/
+#define BLOCK_TABLE_INDEX             0
+
+/***** Wear Leveling Parameters *****/
+#define WEAR_LEVELING_GATE         0x10
+#define WEAR_LEVELING_BLOCK_NUM      10
+
+#define DEBUG_BNDRY             0
+
+/***** Product Feature Support *****/
+#define FLASH_EMU               defined(CONFIG_SPECTRA_EMU)
+#define FLASH_NAND              defined(CONFIG_SPECTRA_MRST_HW)
+#define FLASH_MTD               defined(CONFIG_SPECTRA_MTD)
+#define CMD_DMA                 defined(CONFIG_SPECTRA_MRST_HW_DMA)
+
+#define SPECTRA_PARTITION_ID    0
+
+/* Enable this macro if the number of flash blocks is larger than 16K. */
+#define SUPPORT_LARGE_BLOCKNUM  1
+
+/**** Block Table and Reserved Block Parameters *****/
+#define SPECTRA_START_BLOCK     3
+//#define NUM_FREE_BLOCKS_GATE    30
+#define NUM_FREE_BLOCKS_GATE    60
+
+/**** Hardware Parameters ****/
+#define GLOB_HWCTL_REG_BASE     0xFFA40000
+#define GLOB_HWCTL_REG_SIZE     4096
+
+#define GLOB_HWCTL_MEM_BASE     0xFFA48000
+#define GLOB_HWCTL_MEM_SIZE     4096
+
+/* KBV - Updated to LNW scratch register address */
+#define SCRATCH_REG_ADDR    0xFF108018
+#define SCRATCH_REG_SIZE    64
+
+#define GLOB_HWCTL_DEFAULT_BLKS    2048
+
+#define SUPPORT_15BITECC        1
+#define SUPPORT_8BITECC         1
+
+#define ONFI_BLOOM_TIME         0
+#define MODE5_WORKAROUND        1
+
+#endif /*_SPECTRASWCONFIG_*/
diff --git a/drivers/staging/ti-st/Kconfig b/drivers/staging/ti-st/Kconfig
index 3ab204ddc29..68ad3d0b84a 100644
--- a/drivers/staging/ti-st/Kconfig
+++ b/drivers/staging/ti-st/Kconfig
@@ -4,7 +4,7 @@
 #
 menu "Texas Instruments shared transport line discipline"
 config TI_ST
-	tristate "shared transport core driver"
+	tristate "Shared transport core driver"
 	depends on RFKILL
 	select FW_LOADER
 	help
diff --git a/drivers/staging/ti-st/TODO b/drivers/staging/ti-st/TODO
index 2c4fe583901..ebfd6bb6017 100644
--- a/drivers/staging/ti-st/TODO
+++ b/drivers/staging/ti-st/TODO
@@ -1,17 +1,6 @@
 TODO:
 
-1. A per-device/tty port context required to support multiple devices
-on same platform.
-
-2. REMOVE the sysfs entry PID passing mechanism, since there should
-be a better way to request user-space to install line discipline.
-
-3. Re-view/Re-work on the locking.
-
-4. Re-structure to make the ldisc driver more generic for chipsets which mux
-multiple connectivity (BT, FM, GPS) upon 1 TTY port.
-
-5. Step up and maintain this driver to ensure that it continues
+1. Step up and maintain this driver to ensure that it continues
 to work.  Having the hardware for this is pretty much a
 requirement.  If this does not happen, the will be removed in
 the 2.6.35 kernel release.
diff --git a/drivers/staging/ti-st/bt_drv.c b/drivers/staging/ti-st/bt_drv.c
index d8420b5c91f..61ae98833b1 100644
--- a/drivers/staging/ti-st/bt_drv.c
+++ b/drivers/staging/ti-st/bt_drv.c
@@ -80,31 +80,33 @@ static inline void hci_st_tx_complete(struct hci_st *hst, int pkt_type)
  * status.hci_st_open() function will wait for signal from this
  * API when st_register() function returns ST_PENDING.
  */
-static void hci_st_registration_completion_cb(char data)
+static void hci_st_registration_completion_cb(void *priv_data, char data)
 {
+	struct hci_st *lhst = (struct hci_st *)priv_data;
 	BTDRV_API_START();
 
 	/* hci_st_open() function needs value of 'data' to know
 	 * the registration status(success/fail),So have a back
 	 * up of it.
 	 */
-	hst->streg_cbdata = data;
+	lhst->streg_cbdata = data;
 
 	/* Got a feedback from ST for BT driver registration
 	 * request.Wackup hci_st_open() function to continue
 	 * it's open operation.
 	 */
-	complete(&hst->wait_for_btdrv_reg_completion);
+	complete(&lhst->wait_for_btdrv_reg_completion);
 
 	BTDRV_API_EXIT(0);
 }
 
 /* Called by Shared Transport layer when receive data is
  * available */
-static long hci_st_receive(struct sk_buff *skb)
+static long hci_st_receive(void *priv_data, struct sk_buff *skb)
 {
 	int err;
 	int len;
+	struct hci_st *lhst = (struct hci_st *)priv_data;
 
 	BTDRV_API_START();
 
@@ -116,13 +118,13 @@ static long hci_st_receive(struct sk_buff *skb)
 		BTDRV_API_EXIT(-EFAULT);
 		return -EFAULT;
 	}
-	if (!hst) {
+	if (!lhst) {
 		kfree_skb(skb);
 		BT_DRV_ERR("Invalid hci_st memory,freeing SKB");
 		BTDRV_API_EXIT(-EFAULT);
 		return -EFAULT;
 	}
-	if (!test_bit(BT_DRV_RUNNING, &hst->flags)) {
+	if (!test_bit(BT_DRV_RUNNING, &lhst->flags)) {
 		kfree_skb(skb);
 		BT_DRV_ERR("Device is not running,freeing SKB");
 		BTDRV_API_EXIT(-EINVAL);
@@ -130,7 +132,7 @@ static long hci_st_receive(struct sk_buff *skb)
 	}
 
 	len = skb->len;
-	skb->dev = (struct net_device *)hst->hdev;
+	skb->dev = (struct net_device *)lhst->hdev;
 
 	/* Forward skb to HCI CORE layer */
 	err = hci_recv_frame(skb);
@@ -141,7 +143,7 @@ static long hci_st_receive(struct sk_buff *skb)
 		BTDRV_API_EXIT(err);
 		return err;
 	}
-	hst->hdev->stat.byte_rx += len;
+	lhst->hdev->stat.byte_rx += len;
 
 	BTDRV_API_EXIT(0);
 	return 0;
@@ -189,9 +191,14 @@ static int hci_st_open(struct hci_dev *hdev)
 	 * make it as NULL */
 	hci_st_proto.write = NULL;
 
+	/* send in the hst to be received at registration complete callback
+	 * and during st's receive
+	 */
+	hci_st_proto.priv_data = hst;
+
 	/* Register with ST layer */
 	err = st_register(&hci_st_proto);
-	if (err == ST_ERR_PENDING) {
+	if (err == -EINPROGRESS) {
 		/* Prepare wait-for-completion handler data structures.
 		 * Needed to syncronize this and st_registration_completion_cb()
 		 * functions.
@@ -232,7 +239,7 @@ static int hci_st_open(struct hci_dev *hdev)
 			return -EAGAIN;
 		}
 		err = 0;
-	} else if (err == ST_ERR_FAILURE) {
+	} else if (err == -1) {
 		BT_DRV_ERR("st_register failed %d", err);
 		BTDRV_API_EXIT(-EAGAIN);
 		return -EAGAIN;
@@ -280,7 +287,7 @@ static int hci_st_close(struct hci_dev *hdev)
 	/* Unregister from ST layer */
 	if (test_and_clear_bit(BT_ST_REGISTERED, &hst->flags)) {
 		err = st_unregister(ST_BT);
-		if (err != ST_SUCCESS) {
+		if (err != 0) {
 			BT_DRV_ERR("st_unregister failed %d", err);
 			BTDRV_API_EXIT(-EBUSY);
 			return -EBUSY;
diff --git a/drivers/staging/ti-st/st.h b/drivers/staging/ti-st/st.h
index e8fc97e32c9..9952579425b 100644
--- a/drivers/staging/ti-st/st.h
+++ b/drivers/staging/ti-st/st.h
@@ -24,24 +24,24 @@
 #define ST_H
 
 #include <linux/skbuff.h>
-/*
- * st.h
- */
 
 /* TODO:
  * Move the following to tty.h upon acceptance
  */
 #define N_TI_WL	20	/* Ldisc for TI's WL BT, FM, GPS combo chips */
 
-/* some gpios have active high, others like fm have
- * active low
+/**
+ * enum kim_gpio_state - Few protocols such as FM have ACTIVE LOW
+ *	gpio states for their chip/core enable gpios
  */
 enum kim_gpio_state {
 	KIM_GPIO_INACTIVE,
 	KIM_GPIO_ACTIVE,
 };
-/*
- * the list of protocols on chip
+
+/**
+ * enum proto-type - The protocol on WiLink chips which share a
+ *	common physical interface like UART.
  */
 enum proto_type {
 	ST_BT,
@@ -50,41 +50,35 @@ enum proto_type {
 	ST_MAX,
 };
 
-enum {
-	ST_ERR_FAILURE = -1,	/* check struct */
-	ST_SUCCESS,
-	ST_ERR_PENDING = -5,	/* to call reg_complete_cb */
-	ST_ERR_ALREADY,		/* already registered */
-	ST_ERR_INPROGRESS,
-	ST_ERR_NOPROTO,		/* protocol not supported */
-};
-
-/* per protocol structure
- * for BT/FM and GPS
+/**
+ * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
+ * @type: type of the protocol being registered among the
+ *	available proto_type(BT, FM, GPS the protocol which share TTY).
+ * @recv: the receiver callback pointing to a function in the
+ *	protocol drivers called by the ST driver upon receiving
+ *	relevant data.
+ * @match_packet: reserved for future use, to make ST more generic
+ * @reg_complete_cb: callback handler pointing to a function in protocol
+ *	handler called by ST when the pending registrations are complete.
+ *	The registrations are marked pending, in situations when fw
+ *	download is in progress.
+ * @write: pointer to function in ST provided to protocol drivers from ST,
+ *	to be made use when protocol drivers have data to send to TTY.
+ * @priv_data: privdate data holder for the protocol drivers, sent
+ *	from the protocol drivers during registration, and sent back on
+ *	reg_complete_cb and recv.
  */
 struct st_proto_s {
 	enum proto_type type;
-/*
- * to be called by ST when data arrives
- */
-	long (*recv) (struct sk_buff *);
-/*
- * for future use, logic now to be in ST
- */
+	long (*recv) (void *, struct sk_buff *);
 	unsigned char (*match_packet) (const unsigned char *data);
-/*
- * subsequent registration return PENDING,
- * signalled complete by this callback function
- */
-	void (*reg_complete_cb) (char data);
-/*
- * write function, sent in as NULL and to be returned to
- * protocol drivers
- */
+	void (*reg_complete_cb) (void *, char data);
 	long (*write) (struct sk_buff *skb);
+	void *priv_data;
 };
 
-extern long st_register(struct st_proto_s *new_proto);
-extern long st_unregister(enum proto_type type);
+extern long st_register(struct st_proto_s *);
+extern long st_unregister(enum proto_type);
 
+extern struct platform_device *st_get_plat_device(void);
 #endif /* ST_H */
diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c
index 4e93694e1c2..063c9b1db1a 100644
--- a/drivers/staging/ti-st/st_core.c
+++ b/drivers/staging/ti-st/st_core.c
@@ -38,7 +38,7 @@
 #include "st_ll.h"
 #include "st.h"
 
-#ifdef DEBUG
+#define VERBOSE
 /* strings to be used for rfkill entries and by
  * ST Core to be used for sysfs debug entry
  */
@@ -48,7 +48,6 @@ const unsigned char *protocol_strngs[] = {
 	PROTO_ENTRY(ST_FM, "FM"),
 	PROTO_ENTRY(ST_GPS, "GPS"),
 };
-#endif
 /* function pointer pointing to either,
  * st_kim_recv during registration to receive fw download responses
  * st_int_recv after registration to receive proto stack responses
@@ -61,7 +60,7 @@ void (*st_recv) (void*, const unsigned char*, long);
 bool is_protocol_list_empty(void)
 {
 	unsigned char i = 0;
-	pr_info(" %s ", __func__);
+	pr_debug(" %s ", __func__);
 	for (i = 0; i < ST_MAX; i++) {
 		if (st_gdata->list[i] != NULL)
 			return ST_NOTEMPTY;
@@ -71,6 +70,7 @@ bool is_protocol_list_empty(void)
 	return ST_EMPTY;
 }
 #endif
+
 /* can be called in from
  * -- KIM (during fw download)
  * -- ST Core (during st_write)
@@ -81,20 +81,15 @@ bool is_protocol_list_empty(void)
 int st_int_write(struct st_data_s *st_gdata,
 	const unsigned char *data, int count)
 {
-#ifdef VERBOSE			/* for debug */
-	int i;
-#endif
 	struct tty_struct *tty;
 	if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
 		pr_err("tty unavailable to perform write");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 	tty = st_gdata->tty;
 #ifdef VERBOSE
-	printk(KERN_ERR "start data..\n");
-	for (i = 0; i < count; i++)	/* no newlines for each datum */
-		printk(" %x", data[i]);
-	printk(KERN_ERR "\n ..end data\n");
+	print_hex_dump(KERN_DEBUG, "<out<", DUMP_PREFIX_NONE,
+		16, 1, data, count, 0);
 #endif
 	return tty->ops->write(tty, data, count);
 
@@ -122,8 +117,10 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
 	 *   protocol stack driver
 	 */
 	if (likely(st_gdata->list[protoid]->recv != NULL)) {
-		if (unlikely(st_gdata->list[protoid]->recv(st_gdata->rx_skb)
-			     != ST_SUCCESS)) {
+		if (unlikely
+			(st_gdata->list[protoid]->recv
+			(st_gdata->list[protoid]->priv_data, st_gdata->rx_skb)
+			     != 0)) {
 			pr_err(" proto stack %d's ->recv failed", protoid);
 			kfree_skb(st_gdata->rx_skb);
 			return;
@@ -132,11 +129,11 @@ void st_send_frame(enum proto_type protoid, struct st_data_s *st_gdata)
 		pr_err(" proto stack %d's ->recv null", protoid);
 		kfree_skb(st_gdata->rx_skb);
 	}
-	pr_info(" done %s", __func__);
 	return;
 }
 
-/*
+/**
+ * st_reg_complete -
  * to call registration complete callbacks
  * of all protocol stack drivers
  */
@@ -147,7 +144,8 @@ void st_reg_complete(struct st_data_s *st_gdata, char err)
 	for (i = 0; i < ST_MAX; i++) {
 		if (likely(st_gdata != NULL && st_gdata->list[i] != NULL &&
 			   st_gdata->list[i]->reg_complete_cb != NULL))
-			st_gdata->list[i]->reg_complete_cb(err);
+			st_gdata->list[i]->reg_complete_cb
+				(st_gdata->list[i]->priv_data, err);
 	}
 }
 
@@ -156,7 +154,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 {
 	register int room = skb_tailroom(st_gdata->rx_skb);
 
-	pr_info("len %d room %d", len, room);
+	pr_debug("len %d room %d", len, room);
 
 	if (!len) {
 		/* Received packet has only packet header and
@@ -190,8 +188,9 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
 	return 0;
 }
 
-/* internal function for action when wake-up ack
- * received
+/**
+ * st_wakeup_ack - internal function for action when wake-up ack
+ *	received
  */
 static inline void st_wakeup_ack(struct st_data_s *st_gdata,
 	unsigned char cmd)
@@ -214,9 +213,13 @@ static inline void st_wakeup_ack(struct st_data_s *st_gdata,
 	st_tx_wakeup(st_gdata);
 }
 
-/* Decodes received RAW data and forwards to corresponding
- * client drivers (Bluetooth,FM,GPS..etc).
- *
+/**
+ * st_int_recv - ST's internal receive function.
+ *	Decodes received RAW data and forwards to corresponding
+ *	client drivers (Bluetooth,FM,GPS..etc).
+ *	This can receive various types of packets,
+ *	HCI-Events, ACL, SCO, 4 types of HCI-LL PM packets
+ *	CH-8 packets from FM, CH-9 packets from GPS cores.
  */
 void st_int_recv(void *disc_data,
 	const unsigned char *data, long count)
@@ -259,7 +262,7 @@ void st_int_recv(void *disc_data,
 
 				/* Waiting for complete packet ? */
 			case ST_BT_W4_DATA:
-				pr_info("Complete pkt received");
+				pr_debug("Complete pkt received");
 
 				/* Ask ST CORE to forward
 				 * the packet to protocol driver */
@@ -275,7 +278,7 @@ void st_int_recv(void *disc_data,
 				eh = (struct hci_event_hdr *)st_gdata->rx_skb->
 				    data;
 
-				pr_info("Event header: evt 0x%2.2x"
+				pr_debug("Event header: evt 0x%2.2x"
 					   "plen %d", eh->evt, eh->plen);
 
 				st_check_data_len(st_gdata, protoid, eh->plen);
@@ -439,45 +442,43 @@ void st_int_recv(void *disc_data,
 			break;
 		}
 	}
-	pr_info("done %s", __func__);
+	pr_debug("done %s", __func__);
 	return;
 }
 
-/* internal de-Q function
- * -- return previous in-completely written skb
- *  or return the skb in the txQ
+/**
+ * st_int_dequeue - internal de-Q function.
+ *	If the previous data set was not written
+ *	completely, return that skb which has the pending data.
+ *	In normal cases, return top of txq.
  */
 struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
 {
 	struct sk_buff *returning_skb;
 
-	pr_info("%s", __func__);
-	/* if the previous skb wasn't written completely
-	 */
+	pr_debug("%s", __func__);
 	if (st_gdata->tx_skb != NULL) {
 		returning_skb = st_gdata->tx_skb;
 		st_gdata->tx_skb = NULL;
 		return returning_skb;
 	}
-
-	/* de-Q from the txQ always if previous write is complete */
 	return skb_dequeue(&st_gdata->txq);
 }
 
-/* internal Q-ing function
- * will either Q the skb to txq or the tx_waitq
- * depending on the ST LL state
- *
- * lock the whole func - since ll_getstate and Q-ing should happen
- * in one-shot
+/**
+ * st_int_enqueue - internal Q-ing function.
+ *	Will either Q the skb to txq or the tx_waitq
+ *	depending on the ST LL state.
+ *	If the chip is asleep, then Q it onto waitq and
+ *	wakeup the chip.
+ *	txq and waitq needs protection since the other contexts
+ *	may be sending data, waking up chip.
  */
 void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 {
 	unsigned long flags = 0;
 
-	pr_info("%s", __func__);
-	/* this function can be invoked in more then one context.
-	 * so have a lock */
+	pr_debug("%s", __func__);
 	spin_lock_irqsave(&st_gdata->lock, flags);
 
 	switch (st_ll_getstate(st_gdata)) {
@@ -488,16 +489,12 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 	case ST_LL_ASLEEP_TO_AWAKE:
 		skb_queue_tail(&st_gdata->tx_waitq, skb);
 		break;
-	case ST_LL_AWAKE_TO_ASLEEP:	/* host cannot be in this state */
+	case ST_LL_AWAKE_TO_ASLEEP:
 		pr_err("ST LL is illegal state(%ld),"
 			   "purging received skb.", st_ll_getstate(st_gdata));
 		kfree_skb(skb);
 		break;
-
 	case ST_LL_ASLEEP:
-		/* call a function of ST LL to put data
-		 * in tx_waitQ and wake_ind in txQ
-		 */
 		skb_queue_tail(&st_gdata->tx_waitq, skb);
 		st_ll_wakeup(st_gdata);
 		break;
@@ -507,8 +504,9 @@ void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
 		kfree_skb(skb);
 		break;
 	}
+
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
-	pr_info("done %s", __func__);
+	pr_debug("done %s", __func__);
 	return;
 }
 
@@ -522,7 +520,7 @@ void st_tx_wakeup(struct st_data_s *st_data)
 {
 	struct sk_buff *skb;
 	unsigned long flags;	/* for irq save flags */
-	pr_info("%s", __func__);
+	pr_debug("%s", __func__);
 	/* check for sending & set flag sending here */
 	if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
 		pr_info("ST already sending");
@@ -563,33 +561,13 @@ void st_tx_wakeup(struct st_data_s *st_data)
 /********************************************************************/
 /* functions called from ST KIM
 */
-void kim_st_list_protocols(struct st_data_s *st_gdata, char *buf)
+void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
 {
-	unsigned long flags = 0;
-#ifdef DEBUG
-	unsigned char i = ST_MAX;
-#endif
-	spin_lock_irqsave(&st_gdata->lock, flags);
-#ifdef DEBUG			/* more detailed log */
-	for (i = 0; i < ST_MAX; i++) {
-		if (i == 0) {
-			sprintf(buf, "%s is %s", protocol_strngs[i],
-				st_gdata->list[i] !=
-				NULL ? "Registered" : "Unregistered");
-		} else {
-			sprintf(buf, "%s\n%s is %s", buf, protocol_strngs[i],
-				st_gdata->list[i] !=
-				NULL ? "Registered" : "Unregistered");
-		}
-	}
-	sprintf(buf, "%s\n", buf);
-#else /* limited info */
-	sprintf(buf, "BT=%c\nFM=%c\nGPS=%c\n",
-		st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
-		st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
-		st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
-#endif
-	spin_unlock_irqrestore(&st_gdata->lock, flags);
+	seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
+			st_gdata->protos_registered,
+			st_gdata->list[ST_BT] != NULL ? 'R' : 'U',
+			st_gdata->list[ST_FM] != NULL ? 'R' : 'U',
+			st_gdata->list[ST_GPS] != NULL ? 'R' : 'U');
 }
 
 /********************************************************************/
@@ -600,7 +578,7 @@ void kim_st_list_protocols(struct st_data_s *st_gdata, char *buf)
 long st_register(struct st_proto_s *new_proto)
 {
 	struct st_data_s	*st_gdata;
-	long err = ST_SUCCESS;
+	long err = 0;
 	unsigned long flags = 0;
 
 	st_kim_ref(&st_gdata);
@@ -608,17 +586,17 @@ long st_register(struct st_proto_s *new_proto)
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
 		pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 
 	if (new_proto->type < ST_BT || new_proto->type >= ST_MAX) {
 		pr_err("protocol %d not supported", new_proto->type);
-		return ST_ERR_NOPROTO;
+		return -EPROTONOSUPPORT;
 	}
 
 	if (st_gdata->list[new_proto->type] != NULL) {
 		pr_err("protocol %d already registered", new_proto->type);
-		return ST_ERR_ALREADY;
+		return -EALREADY;
 	}
 
 	/* can be from process context only */
@@ -630,11 +608,12 @@ long st_register(struct st_proto_s *new_proto)
 		st_kim_chip_toggle(new_proto->type, KIM_GPIO_ACTIVE);
 
 		st_gdata->list[new_proto->type] = new_proto;
+		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
 		set_bit(ST_REG_PENDING, &st_gdata->st_state);
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return ST_ERR_PENDING;
+		return -EINPROGRESS;
 	} else if (st_gdata->protos_registered == ST_EMPTY) {
 		pr_info(" protocol list empty :%d ", new_proto->type);
 		set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
@@ -648,16 +627,16 @@ long st_register(struct st_proto_s *new_proto)
 		/* this may take a while to complete
 		 * since it involves BT fw download
 		 */
-		err = st_kim_start();
-		if (err != ST_SUCCESS) {
+		err = st_kim_start(st_gdata->kim_data);
+		if (err != 0) {
 			clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
 			if ((st_gdata->protos_registered != ST_EMPTY) &&
 			    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
 				pr_err(" KIM failure complete callback ");
-				st_reg_complete(st_gdata, ST_ERR_FAILURE);
+				st_reg_complete(st_gdata, -1);
 			}
 
-			return ST_ERR_FAILURE;
+			return -1;
 		}
 
 		/* the protocol might require other gpios to be toggled
@@ -672,9 +651,8 @@ long st_register(struct st_proto_s *new_proto)
 		 */
 		if ((st_gdata->protos_registered != ST_EMPTY) &&
 		    (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
-			pr_info(" call reg complete callback ");
-			st_gdata->protos_registered++;
-			st_reg_complete(st_gdata, ST_SUCCESS);
+			pr_debug(" call reg complete callback ");
+			st_reg_complete(st_gdata, 0);
 		}
 		clear_bit(ST_REG_PENDING, &st_gdata->st_state);
 
@@ -684,11 +662,12 @@ long st_register(struct st_proto_s *new_proto)
 		if (st_gdata->list[new_proto->type] != NULL) {
 			pr_err(" proto %d already registered ",
 				   new_proto->type);
-			return ST_ERR_ALREADY;
+			return -EALREADY;
 		}
 
 		spin_lock_irqsave(&st_gdata->lock, flags);
 		st_gdata->list[new_proto->type] = new_proto;
+		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return err;
@@ -707,18 +686,19 @@ long st_register(struct st_proto_s *new_proto)
 		default:
 			pr_err("%d protocol not supported",
 				   new_proto->type);
-			err = ST_ERR_NOPROTO;
+			err = -EPROTONOSUPPORT;
 			/* something wrong */
 			break;
 		}
 		st_gdata->list[new_proto->type] = new_proto;
+		st_gdata->protos_registered++;
 		new_proto->write = st_write;
 
 		/* lock already held before entering else */
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
 		return err;
 	}
-	pr_info("done %s(%d) ", __func__, new_proto->type);
+	pr_debug("done %s(%d) ", __func__, new_proto->type);
 }
 EXPORT_SYMBOL_GPL(st_register);
 
@@ -727,16 +707,16 @@ EXPORT_SYMBOL_GPL(st_register);
  */
 long st_unregister(enum proto_type type)
 {
-	long err = ST_SUCCESS;
+	long err = 0;
 	unsigned long flags = 0;
 	struct st_data_s	*st_gdata;
 
-	pr_info("%s: %d ", __func__, type);
+	pr_debug("%s: %d ", __func__, type);
 
 	st_kim_ref(&st_gdata);
 	if (type < ST_BT || type >= ST_MAX) {
 		pr_err(" protocol %d not supported", type);
-		return ST_ERR_NOPROTO;
+		return -EPROTONOSUPPORT;
 	}
 
 	spin_lock_irqsave(&st_gdata->lock, flags);
@@ -744,7 +724,7 @@ long st_unregister(enum proto_type type)
 	if (st_gdata->list[type] == NULL) {
 		pr_err(" protocol %d not registered", type);
 		spin_unlock_irqrestore(&st_gdata->lock, flags);
-		return ST_ERR_NOPROTO;
+		return -EPROTONOSUPPORT;
 	}
 
 	st_gdata->protos_registered--;
@@ -768,7 +748,7 @@ long st_unregister(enum proto_type type)
 		}
 
 		/* all protocols now unregistered */
-		st_kim_stop();
+		st_kim_stop(st_gdata->kim_data);
 		/* disable ST LL */
 		st_ll_disable(st_gdata);
 	}
@@ -791,7 +771,7 @@ long st_write(struct sk_buff *skb)
 	if (unlikely(skb == NULL || st_gdata == NULL
 		|| st_gdata->tty == NULL)) {
 		pr_err("data/tty unavailable to perform write");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 #ifdef DEBUG			/* open-up skb to read the 1st byte */
 	switch (skb->data[0]) {
@@ -810,10 +790,10 @@ long st_write(struct sk_buff *skb)
 	if (unlikely(st_gdata->list[protoid] == NULL)) {
 		pr_err(" protocol %d not registered, and writing? ",
 			   protoid);
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 #endif
-	pr_info("%d to be written", skb->len);
+	pr_debug("%d to be written", skb->len);
 	len = skb->len;
 
 	/* st_ll to decide where to enqueue the skb */
@@ -834,7 +814,7 @@ EXPORT_SYMBOL_GPL(st_unregister);
  */
 static int st_tty_open(struct tty_struct *tty)
 {
-	int err = ST_SUCCESS;
+	int err = 0;
 	struct st_data_s *st_gdata;
 	pr_info("%s ", __func__);
 
@@ -855,8 +835,8 @@ static int st_tty_open(struct tty_struct *tty)
 	 * signal to UIM via KIM that -
 	 * installation of N_TI_WL ldisc is complete
 	 */
-	st_kim_complete();
-	pr_info("done %s", __func__);
+	st_kim_complete(st_gdata->kim_data);
+	pr_debug("done %s", __func__);
 	return err;
 }
 
@@ -878,12 +858,13 @@ static void st_tty_close(struct tty_struct *tty)
 			pr_err("%d not un-registered", i);
 		st_gdata->list[i] = NULL;
 	}
+	st_gdata->protos_registered = 0;
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 	/*
 	 * signal to UIM via KIM that -
 	 * N_TI_WL ldisc is un-installed
 	 */
-	st_kim_complete();
+	st_kim_complete(st_gdata->kim_data);
 	st_gdata->tty = NULL;
 	/* Flush any pending characters in the driver and discipline. */
 	tty_ldisc_flush(tty);
@@ -900,7 +881,7 @@ static void st_tty_close(struct tty_struct *tty)
 	st_gdata->rx_skb = NULL;
 	spin_unlock_irqrestore(&st_gdata->lock, flags);
 
-	pr_info("%s: done ", __func__);
+	pr_debug("%s: done ", __func__);
 }
 
 static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
@@ -908,11 +889,8 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 {
 
 #ifdef VERBOSE
-	long i;
-	printk(KERN_ERR "incoming data...\n");
-	for (i = 0; i < count; i++)
-		printk(" %x", data[i]);
-	printk(KERN_ERR "\n.. data end\n");
+	print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
+		16, 1, data, count, 0);
 #endif
 
 	/*
@@ -920,7 +898,7 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 	 * to KIM for validation
 	 */
 	st_recv(tty->disc_data, data, count);
-	pr_info("done %s", __func__);
+	pr_debug("done %s", __func__);
 }
 
 /* wake-up function called in from the TTY layer
@@ -929,7 +907,7 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
 static void st_tty_wakeup(struct tty_struct *tty)
 {
 	struct	st_data_s *st_gdata = tty->disc_data;
-	pr_info("%s ", __func__);
+	pr_debug("%s ", __func__);
 	/* don't do an wakeup for now */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 
@@ -940,7 +918,7 @@ static void st_tty_wakeup(struct tty_struct *tty)
 static void st_tty_flush_buffer(struct tty_struct *tty)
 {
 	struct	st_data_s *st_gdata = tty->disc_data;
-	pr_info("%s ", __func__);
+	pr_debug("%s ", __func__);
 
 	kfree_skb(st_gdata->tx_skb);
 	st_gdata->tx_skb = NULL;
@@ -979,7 +957,7 @@ int st_core_init(struct st_data_s **core_data)
 		kfree(st_ldisc_ops);
 		return err;
 	}
-	pr_info("registered n_shared line discipline");
+	pr_debug("registered n_shared line discipline");
 
 	st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL);
 	if (!st_gdata) {
diff --git a/drivers/staging/ti-st/st_core.h b/drivers/staging/ti-st/st_core.h
index f271c88a808..e0c32d149f5 100644
--- a/drivers/staging/ti-st/st_core.h
+++ b/drivers/staging/ti-st/st_core.h
@@ -36,57 +36,87 @@
 #define ST_REG_PENDING		3
 #define ST_WAITING_FOR_RESP	4
 
-/*
- * local data required for ST/KIM/ST-HCI-LL
+/**
+ * struct st_data_s - ST core internal structure
+ * @st_state: different states of ST like initializing, registration
+ *	in progress, this is mainly used to return relevant err codes
+ *	when protocol drivers are registering. It is also used to track
+ *	the recv function, as in during fw download only HCI events
+ *	can occur , where as during other times other events CH8, CH9
+ *	can occur.
+ * @tty: tty provided by the TTY core for line disciplines.
+ * @ldisc_ops: the procedures that this line discipline registers with TTY.
+ * @tx_skb: If for some reason the tty's write returns lesser bytes written
+ *	then to maintain the rest of data to be written on next instance.
+ *	This needs to be protected, hence the lock inside wakeup func.
+ * @tx_state: if the data is being written onto the TTY and protocol driver
+ *	wants to send more, queue up data and mark that there is
+ *	more data to send.
+ * @list: the list of protocols registered, only MAX can exist, one protocol
+ *	can register only once.
+ * @rx_state: states to be maintained inside st's tty receive
+ * @rx_count: count to be maintained inside st's tty receieve
+ * @rx_skb: the skb where all data for a protocol gets accumulated,
+ *	since tty might not call receive when a complete event packet
+ *	is received, the states, count and the skb needs to be maintained.
+ * @txq: the list of skbs which needs to be sent onto the TTY.
+ * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
+ *	up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
+ *	from waitq can be moved onto the txq.
+ *	Needs locking too.
+ * @lock: the lock to protect skbs, queues, and ST states.
+ * @protos_registered: count of the protocols registered, also when 0 the
+ *	chip enable gpio can be toggled, and when it changes to 1 the fw
+ *	needs to be downloaded to initialize chip side ST.
+ * @ll_state: the various PM states the chip can be, the states are notified
+ *	to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
+ * @kim_data: reference to the parent encapsulating structure.
+ *
  */
 struct st_data_s {
 	unsigned long st_state;
-/*
- * an instance of tty_struct & ldisc ops to move around
- */
 	struct tty_struct *tty;
 	struct tty_ldisc_ops *ldisc_ops;
-/*
- * the tx skb -
- * if the skb is already dequeued and the tty failed to write the same
- * maintain the skb to write in the next transaction
- */
 	struct sk_buff *tx_skb;
 #define ST_TX_SENDING	1
 #define ST_TX_WAKEUP	2
 	unsigned long tx_state;
-/*
- * list of protocol registered
- */
 	struct st_proto_s *list[ST_MAX];
-/*
- * lock
- */
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
 	struct sk_buff_head txq, tx_waitq;
-	spinlock_t lock;	/* ST LL state lock  */
+	spinlock_t lock;
 	unsigned char	protos_registered;
-	unsigned long ll_state;	/* ST LL power state */
+	unsigned long ll_state;
+	void *kim_data;
 };
 
-/* point this to tty->driver->write or tty->ops->write
+/**
+ * st_int_write -
+ * point this to tty->driver->write or tty->ops->write
  * depending upon the kernel version
  */
 int st_int_write(struct st_data_s*, const unsigned char*, int);
-/* internal write function, passed onto protocol drivers
+
+/**
+ * st_write -
+ * internal write function, passed onto protocol drivers
  * via the write function ptr of protocol struct
  */
 long st_write(struct sk_buff *);
-/* function to be called from ST-LL
- */
+
+/* function to be called from ST-LL */
 void st_ll_send_frame(enum proto_type, struct sk_buff *);
+
 /* internal wake up function */
 void st_tx_wakeup(struct st_data_s *st_data);
 
+/* init, exit entry funcs called from KIM */
 int st_core_init(struct st_data_s **);
 void st_core_exit(struct st_data_s *);
+
+/* ask for reference from KIM */
 void st_kim_ref(struct st_data_s **);
 
 #define GPS_STUB_TEST
diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c
index 98cbabba384..b4a6c7fdc4e 100644
--- a/drivers/staging/ti-st/st_kim.c
+++ b/drivers/staging/ti-st/st_kim.c
@@ -26,6 +26,8 @@
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/gpio.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <linux/sched.h>
 
@@ -55,37 +57,10 @@ static struct platform_driver kim_platform_driver = {
 		   },
 };
 
-#ifndef LEGACY_RFKILL_SUPPORT
-static ssize_t show_pid(struct device *dev, struct device_attribute
-			*attr, char *buf);
-static ssize_t store_pid(struct device *dev, struct device_attribute
-			 *devattr, char *buf, size_t count);
-static ssize_t show_list(struct device *dev, struct device_attribute
-			 *attr, char *buf);
-
-/* structures specific for sysfs entries */
-static struct kobj_attribute pid_attr =
-__ATTR(pid, 0644, (void *)show_pid, (void *)store_pid);
-
-static struct kobj_attribute list_protocols =
-__ATTR(protocols, 0444, (void *)show_list, NULL);
-
-static struct attribute *uim_attrs[] = {
-	&pid_attr.attr,
-	/* add more debug sysfs entries */
-	&list_protocols.attr,
-	NULL,
-};
-
-static struct attribute_group uim_attr_grp = {
-	.attrs = uim_attrs,
-};
-#else
 static int kim_toggle_radio(void*, bool);
 static const struct rfkill_ops kim_rfkill_ops = {
 	.set_block = kim_toggle_radio,
 };
-#endif	/* LEGACY_RFKILL_SUPPORT */
 
 /* strings to be used for rfkill entries and by
  * ST Core to be used for sysfs debug entry
@@ -97,18 +72,19 @@ const unsigned char *protocol_names[] = {
 	PROTO_ENTRY(ST_GPS, "GPS"),
 };
 
-struct kim_data_s	*kim_gdata;
 
 /**********************************************************************/
 /* internal functions */
 
-/*
- * function to return whether the firmware response was proper
- * in case of error don't complete so that waiting for proper
- * response times out
+/**
+ * validate_firmware_response -
+ *	function to return whether the firmware response was proper
+ *	in case of error don't complete so that waiting for proper
+ *	response times out
  */
-void validate_firmware_response(struct sk_buff *skb)
+void validate_firmware_response(struct kim_data_s *kim_gdata)
 {
+	struct sk_buff *skb = kim_gdata->rx_skb;
 	if (unlikely(skb->data[5] != 0)) {
 		pr_err("no proper response during fw download");
 		pr_err("data6 %x", skb->data[5]);
@@ -122,14 +98,14 @@ void validate_firmware_response(struct sk_buff *skb)
 /* check for data len received inside kim_int_recv
  * most often hit the last case to update state to waiting for data
  */
-static inline int kim_check_data_len(int len)
+static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
 {
 	register int room = skb_tailroom(kim_gdata->rx_skb);
 
-	pr_info("len %d room %d", len, room);
+	pr_debug("len %d room %d", len, room);
 
 	if (!len) {
-		validate_firmware_response(kim_gdata->rx_skb);
+		validate_firmware_response(kim_gdata);
 	} else if (len > room) {
 		/* Received packet's payload length is larger.
 		 * We can't accommodate it in created skb.
@@ -155,18 +131,20 @@ static inline int kim_check_data_len(int len)
 	return 0;
 }
 
-/* receive function called during firmware download
- * - firmware download responses on different UART drivers
- *   have been observed to come in bursts of different
- *   tty_receive and hence the logic
+/**
+ * kim_int_recv - receive function called during firmware download
+ *	firmware download responses on different UART drivers
+ *	have been observed to come in bursts of different
+ *	tty_receive and hence the logic
  */
-void kim_int_recv(const unsigned char *data, long count)
+void kim_int_recv(struct kim_data_s *kim_gdata,
+	const unsigned char *data, long count)
 {
 	register char *ptr;
 	struct hci_event_hdr *eh;
 	register int len = 0, type = 0;
 
-	pr_info("%s", __func__);
+	pr_debug("%s", __func__);
 	/* Decode received bytes here */
 	ptr = (char *)data;
 	if (unlikely(ptr == NULL)) {
@@ -188,8 +166,8 @@ void kim_int_recv(const unsigned char *data, long count)
 			switch (kim_gdata->rx_state) {
 				/* Waiting for complete packet ? */
 			case ST_BT_W4_DATA:
-				pr_info("Complete pkt received");
-				validate_firmware_response(kim_gdata->rx_skb);
+				pr_debug("Complete pkt received");
+				validate_firmware_response(kim_gdata);
 				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 				kim_gdata->rx_skb = NULL;
 				continue;
@@ -197,9 +175,9 @@ void kim_int_recv(const unsigned char *data, long count)
 			case ST_BT_W4_EVENT_HDR:
 				eh = (struct hci_event_hdr *)kim_gdata->
 				    rx_skb->data;
-				pr_info("Event header: evt 0x%2.2x"
+				pr_debug("Event header: evt 0x%2.2x"
 					   "plen %d", eh->evt, eh->plen);
-				kim_check_data_len(eh->plen);
+				kim_check_data_len(kim_gdata, eh->plen);
 				continue;
 			}	/* end of switch */
 		}		/* end of if rx_state */
@@ -216,7 +194,7 @@ void kim_int_recv(const unsigned char *data, long count)
 			ptr++;
 			count--;
 			continue;
-		}		/* end of switch *ptr */
+		}
 		ptr++;
 		count--;
 		kim_gdata->rx_skb =
@@ -226,34 +204,35 @@ void kim_int_recv(const unsigned char *data, long count)
 			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
 			kim_gdata->rx_count = 0;
 			return;
-		} /* not necessary in this case */
+		}
 		bt_cb(kim_gdata->rx_skb)->pkt_type = type;
-	}			/* end of while count */
+	}
 	pr_info("done %s", __func__);
 	return;
 }
 
-static long read_local_version(char *bts_scr_name)
+static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
 {
 	unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
 	char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
 
-	pr_info("%s", __func__);
+	pr_debug("%s", __func__);
 
 	INIT_COMPLETION(kim_gdata->kim_rcvd);
 	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
 		pr_err("kim: couldn't write 4 bytes");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 
 	if (!wait_for_completion_timeout
 	    (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
 		pr_err(" waiting for ver info- timed out ");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 
 	version =
-	    MAKEWORD(kim_gdata->resp_buffer[13], kim_gdata->resp_buffer[14]);
+		MAKEWORD(kim_gdata->resp_buffer[13],
+				kim_gdata->resp_buffer[14]);
 	chip = (version & 0x7C00) >> 10;
 	min_ver = (version & 0x007F);
 	maj_ver = (version & 0x0380) >> 7;
@@ -262,25 +241,32 @@ static long read_local_version(char *bts_scr_name)
 		maj_ver |= 0x0008;
 
 	sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
+
+	/* to be accessed later via sysfs entry */
+	kim_gdata->version.full = version;
+	kim_gdata->version.chip = chip;
+	kim_gdata->version.maj_ver = maj_ver;
+	kim_gdata->version.min_ver = min_ver;
+
 	pr_info("%s", bts_scr_name);
-	return ST_SUCCESS;
+	return 0;
 }
 
-/* internal function which parses through the .bts firmware script file
- * intreprets SEND, DELAY actions only as of now
+/**
+ * download_firmware -
+ *	internal function which parses through the .bts firmware
+ *	script file intreprets SEND, DELAY actions only as of now
  */
-static long download_firmware(void)
+static long download_firmware(struct kim_data_s *kim_gdata)
 {
-	long err = ST_SUCCESS;
+	long err = 0;
 	long len = 0;
 	register unsigned char *ptr = NULL;
 	register unsigned char *action_ptr = NULL;
 	unsigned char bts_scr_name[30] = { 0 };	/* 30 char long bts scr name? */
 
-	pr_info("%s", __func__);
-
-	err = read_local_version(bts_scr_name);
-	if (err != ST_SUCCESS) {
+	err = read_local_version(kim_gdata, bts_scr_name);
+	if (err != 0) {
 		pr_err("kim: failed to read local ver");
 		return err;
 	}
@@ -291,7 +277,7 @@ static long download_firmware(void)
 		     (kim_gdata->fw_entry->size == 0))) {
 		pr_err(" request_firmware failed(errno %ld) for %s", err,
 			   bts_scr_name);
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 	ptr = (void *)kim_gdata->fw_entry->data;
 	len = kim_gdata->fw_entry->size;
@@ -302,7 +288,7 @@ static long download_firmware(void)
 	len -= sizeof(struct bts_header);
 
 	while (len > 0 && ptr) {
-		pr_info(" action size %d, type %d ",
+		pr_debug(" action size %d, type %d ",
 			   ((struct bts_action *)ptr)->size,
 			   ((struct bts_action *)ptr)->type);
 
@@ -315,8 +301,8 @@ static long download_firmware(void)
 				/* ignore remote change
 				 * baud rate HCI VS command */
 				pr_err
-				    (" change remote baud\
-				    rate command in firmware");
+				    (" change remote baud"
+				    " rate command in firmware");
 				break;
 			}
 
@@ -326,7 +312,7 @@ static long download_firmware(void)
 					   ((struct bts_action *)ptr)->size);
 			if (unlikely(err < 0)) {
 				release_firmware(kim_gdata->fw_entry);
-				return ST_ERR_FAILURE;
+				return -1;
 			}
 			if (!wait_for_completion_timeout
 			    (&kim_gdata->kim_rcvd,
@@ -335,7 +321,7 @@ static long download_firmware(void)
 				    (" response timeout during fw download ");
 				/* timed out */
 				release_firmware(kim_gdata->fw_entry);
-				return ST_ERR_FAILURE;
+				return -1;
 			}
 			break;
 		case ACTION_DELAY:	/* sleep */
@@ -353,19 +339,23 @@ static long download_firmware(void)
 	}
 	/* fw download complete */
 	release_firmware(kim_gdata->fw_entry);
-	return ST_SUCCESS;
+	return 0;
 }
 
 /**********************************************************************/
 /* functions called from ST core */
-
 /* function to toggle the GPIO
  * needs to know whether the GPIO is active high or active low
  */
 void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 {
+	struct platform_device	*kim_pdev;
+	struct kim_data_s	*kim_gdata;
 	pr_info(" %s ", __func__);
 
+	kim_pdev = st_get_plat_device();
+	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
+
 	if (kim_gdata->gpios[type] == -1) {
 		pr_info(" gpio not requested for protocol %s",
 			   protocol_names[type]);
@@ -405,6 +395,9 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
  */
 void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 {
+	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
+	struct kim_data_s	*kim_gdata = st_gdata->kim_data;
+
 	pr_info(" %s ", __func__);
 	/* copy to local buffer */
 	if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
@@ -413,7 +406,7 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 		complete_all(&kim_gdata->kim_rcvd);
 		return;
 	} else {
-		kim_int_recv(data, count);
+		kim_int_recv(kim_gdata, data, count);
 		/* either completes or times out */
 	}
 	return;
@@ -422,27 +415,33 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
 /* to signal completion of line discipline installation
  * called from ST Core, upon tty_open
  */
-void st_kim_complete(void)
+void st_kim_complete(void *kim_data)
 {
+	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
 	complete(&kim_gdata->ldisc_installed);
 }
 
-/* called from ST Core upon 1st registration
-*/
-long st_kim_start(void)
+/**
+ * st_kim_start - called from ST Core upon 1st registration
+ *	This involves toggling the chip enable gpio, reading
+ *	the firmware version from chip, forming the fw file name
+ *	based on the chip version, requesting the fw, parsing it
+ *	and perform download(send/recv).
+ */
+long st_kim_start(void *kim_data)
 {
-	long err = ST_SUCCESS;
+	long err = 0;
 	long retry = POR_RETRY_COUNT;
+	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
+
 	pr_info(" %s", __func__);
 
 	do {
-#ifdef LEGACY_RFKILL_SUPPORT
 		/* TODO: this is only because rfkill sub-system
 		 * doesn't send events to user-space if the state
 		 * isn't changed
 		 */
 		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
-#endif
 		/* Configure BT nShutdown to HIGH state */
 		gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
 		mdelay(5);	/* FIXME: a proper toggle */
@@ -450,30 +449,29 @@ long st_kim_start(void)
 		mdelay(100);
 		/* re-initialize the completion */
 		INIT_COMPLETION(kim_gdata->ldisc_installed);
-#ifndef LEGACY_RFKILL_SUPPORT
+#if 0 /* older way of signalling user-space UIM */
 		/* send signal to UIM */
 		err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
 		if (err != 0) {
 			pr_info(" sending SIGUSR2 to uim failed %ld", err);
-			err = ST_ERR_FAILURE;
+			err = -1;
 			continue;
 		}
-#else
+#endif
 		/* unblock and send event to UIM via /dev/rfkill */
 		rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
-#endif
 		/* wait for ldisc to be installed */
 		err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 				msecs_to_jiffies(LDISC_TIME));
 		if (!err) {	/* timeout */
 			pr_err("line disc installation timed out ");
-			err = ST_ERR_FAILURE;
+			err = -1;
 			continue;
 		} else {
 			/* ldisc installed now */
 			pr_info(" line discipline installed ");
-			err = download_firmware();
-			if (err != ST_SUCCESS) {
+			err = download_firmware(kim_gdata);
+			if (err != 0) {
 				pr_err("download firmware failed");
 				continue;
 			} else {	/* on success don't retry */
@@ -484,31 +482,33 @@ long st_kim_start(void)
 	return err;
 }
 
-/* called from ST Core, on the last un-registration
-*/
-long st_kim_stop(void)
+/**
+ * st_kim_stop - called from ST Core, on the last un-registration
+ *	toggle low the chip enable gpio
+ */
+long st_kim_stop(void *kim_data)
 {
-	long err = ST_SUCCESS;
+	long err = 0;
+	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
 
 	INIT_COMPLETION(kim_gdata->ldisc_installed);
-#ifndef LEGACY_RFKILL_SUPPORT
+#if 0 /* older way of signalling user-space UIM */
 	/* send signal to UIM */
 	err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
 	if (err != 0) {
 		pr_err("sending SIGUSR2 to uim failed %ld", err);
-		return ST_ERR_FAILURE;
+		return -1;
 	}
-#else
+#endif
 	/* set BT rfkill to be blocked */
 	err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
-#endif
 
 	/* wait for ldisc to be un-installed */
 	err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
 			msecs_to_jiffies(LDISC_TIME));
 	if (!err) {		/* timeout */
 		pr_err(" timed out waiting for ldisc to be un-installed");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
 
 	/* By default configure BT nShutdown to LOW state */
@@ -522,37 +522,24 @@ long st_kim_stop(void)
 
 /**********************************************************************/
 /* functions called from subsystems */
+/* called when debugfs entry is read from */
 
-#ifndef LEGACY_RFKILL_SUPPORT
-/* called when sysfs entry is written to */
-static ssize_t store_pid(struct device *dev, struct device_attribute
-			 *devattr, char *buf, size_t count)
+static int show_version(struct seq_file *s, void *unused)
 {
-	pr_info("%s: pid %s ", __func__, buf);
-	sscanf(buf, "%ld", &kim_gdata->uim_pid);
-	/* to be made use by kim_start to signal SIGUSR2
-	 */
-	return strlen(buf);
-}
-
-/* called when sysfs entry is read from */
-static ssize_t show_pid(struct device *dev, struct device_attribute
-			*attr, char *buf)
-{
-	sprintf(buf, "%ld", kim_gdata->uim_pid);
-	return strlen(buf);
+	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
+	seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
+			kim_gdata->version.chip, kim_gdata->version.maj_ver,
+			kim_gdata->version.min_ver);
+	return 0;
 }
 
-/* called when sysfs entry is read from */
-static ssize_t show_list(struct device *dev, struct device_attribute
-			 *attr, char *buf)
+static int show_list(struct seq_file *s, void *unused)
 {
-	kim_st_list_protocols(kim_gdata->core_data, buf);
-	return strlen(buf);
+	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
+	kim_st_list_protocols(kim_gdata->core_data, s);
+	return 0;
 }
 
-#else /* LEGACY_RFKILL_SUPPORT */
-
 /* function called from rfkill subsystem, when someone from
  * user space would write 0/1 on the sysfs entry
  * /sys/class/rfkill/rfkill0,1,3/state
@@ -560,7 +547,7 @@ static ssize_t show_list(struct device *dev, struct device_attribute
 static int kim_toggle_radio(void *data, bool blocked)
 {
 	enum proto_type type = *((enum proto_type *)data);
-	pr_info(" %s: %d ", __func__, type);
+	pr_debug(" %s: %d ", __func__, type);
 
 	switch (type) {
 	case ST_BT:
@@ -577,33 +564,79 @@ static int kim_toggle_radio(void *data, bool blocked)
 		pr_err(" wrong proto type ");
 	break;
 	}
-	return ST_SUCCESS;
+	return 0;
 }
 
-#endif	/* LEGACY_RFKILL_SUPPORT */
-
+/**
+ * st_kim_ref - reference the core's data
+ *	This references the per-ST platform device in the arch/xx/
+ *	board-xx.c file.
+ *	This would enable multiple such platform devices to exist
+ *	on a given platform
+ */
 void st_kim_ref(struct st_data_s **core_data)
 {
+	struct platform_device	*pdev;
+	struct kim_data_s	*kim_gdata;
+	/* get kim_gdata reference from platform device */
+	pdev = st_get_plat_device();
+	kim_gdata = dev_get_drvdata(&pdev->dev);
 	*core_data = kim_gdata->core_data;
 }
 
+static int kim_version_open(struct inode *i, struct file *f)
+{
+	return single_open(f, show_version, i->i_private);
+}
+
+static int kim_list_open(struct inode *i, struct file *f)
+{
+	return single_open(f, show_list, i->i_private);
+}
+
+static const struct file_operations version_debugfs_fops = {
+	/* version info */
+	.open = kim_version_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+static const struct file_operations list_debugfs_fops = {
+	/* protocols info */
+	.open = kim_list_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
 /**********************************************************************/
 /* functions called from platform device driver subsystem
  * need to have a relevant platform device entry in the platform's
  * board-*.c file
  */
 
+struct dentry *kim_debugfs_dir;
 static int kim_probe(struct platform_device *pdev)
 {
 	long status;
 	long proto;
 	long *gpios = pdev->dev.platform_data;
+	struct kim_data_s	*kim_gdata;
+
+	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
+	if (!kim_gdata) {
+		pr_err("no mem to allocate");
+		return -ENOMEM;
+	}
+	dev_set_drvdata(&pdev->dev, kim_gdata);
 
 	status = st_core_init(&kim_gdata->core_data);
 	if (status != 0) {
 		pr_err(" ST core init failed");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
+	/* refer to itself */
+	kim_gdata->core_data->kim_data = kim_gdata;
 
 	for (proto = 0; proto < ST_MAX; proto++) {
 		kim_gdata->gpios[proto] = gpios[proto];
@@ -639,30 +672,12 @@ static int kim_probe(struct platform_device *pdev)
 			return status;
 		}
 	}
-#ifndef LEGACY_RFKILL_SUPPORT
-	/* pdev to contain BT, FM and GPS enable/N-Shutdown GPIOs
-	 * execute request_gpio, set output direction
-	 */
-	kim_gdata->kim_kobj = kobject_create_and_add("uim", NULL);
-	/* create the sysfs entry for UIM to put in pid */
-	if (sysfs_create_group(kim_gdata->kim_kobj, &uim_attr_grp)) {
-		pr_err(" sysfs entry creation failed");
-		kobject_put(kim_gdata->kim_kobj);
-		/* free requested GPIOs and fail probe */
-		for (proto = ST_BT; proto < ST_MAX; proto++) {
-			if (gpios[proto] != -1)
-				gpio_free(gpios[proto]);
-		}
-		return -1;	/* fail insmod */
-	}
-	pr_info(" sysfs entry created ");
-#endif
 	/* get reference of pdev for request_firmware
 	 */
 	kim_gdata->kim_pdev = pdev;
 	init_completion(&kim_gdata->kim_rcvd);
 	init_completion(&kim_gdata->ldisc_installed);
-#ifdef LEGACY_RFKILL_SUPPORT
+
 	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
 		/* TODO: should all types be rfkill_type_bt ? */
 		kim_gdata->rf_protos[proto] = proto;
@@ -685,8 +700,20 @@ static int kim_probe(struct platform_device *pdev)
 		}
 		pr_info("rfkill entry created for %ld", gpios[proto]);
 	}
-#endif
-	return ST_SUCCESS;
+
+	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
+	if (IS_ERR(kim_debugfs_dir)) {
+		pr_err(" debugfs entries creation failed ");
+		kim_debugfs_dir = NULL;
+		return -1;
+	}
+
+	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
+				kim_gdata, &version_debugfs_fops);
+	debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
+				kim_gdata, &list_debugfs_fops);
+	pr_info(" debugfs entries created ");
+	return 0;
 }
 
 static int kim_remove(struct platform_device *pdev)
@@ -695,27 +722,27 @@ static int kim_remove(struct platform_device *pdev)
 	 */
 	long *gpios = pdev->dev.platform_data;
 	long proto;
+	struct kim_data_s	*kim_gdata;
+
+	kim_gdata = dev_get_drvdata(&pdev->dev);
 
 	for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
 		/* Claim the Bluetooth/FM/GPIO
 		 * nShutdown gpio from the system
 		 */
 		gpio_free(gpios[proto]);
-#ifdef LEGACY_RFKILL_SUPPORT
 		rfkill_unregister(kim_gdata->rfkill[proto]);
 		rfkill_destroy(kim_gdata->rfkill[proto]);
 		kim_gdata->rfkill[proto] = NULL;
-#endif
 	}
 	pr_info("kim: GPIO Freed");
-#ifndef LEGACY_RFKILL_SUPPORT
-	/* delete the sysfs entries */
-	sysfs_remove_group(kim_gdata->kim_kobj, &uim_attr_grp);
-	kobject_put(kim_gdata->kim_kobj);
-#endif
+	debugfs_remove_recursive(kim_debugfs_dir);
 	kim_gdata->kim_pdev = NULL;
 	st_core_exit(kim_gdata->core_data);
-	return ST_SUCCESS;
+
+	kfree(kim_gdata);
+	kim_gdata = NULL;
+	return 0;
 }
 
 /**********************************************************************/
@@ -723,27 +750,19 @@ static int kim_remove(struct platform_device *pdev)
 
 static int __init st_kim_init(void)
 {
-	long ret = ST_SUCCESS;
-	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
-	if (!kim_gdata) {
-		pr_err("no mem to allocate");
-		return -ENOMEM;
-	}
-
+	long ret = 0;
 	ret = platform_driver_register(&kim_platform_driver);
 	if (ret != 0) {
 		pr_err("platform drv registration failed");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
-	return ST_SUCCESS;
+	return 0;
 }
 
 static void __exit st_kim_deinit(void)
 {
 	/* the following returns void */
 	platform_driver_unregister(&kim_platform_driver);
-	kfree(kim_gdata);
-	kim_gdata = NULL;
 }
 
 
diff --git a/drivers/staging/ti-st/st_kim.h b/drivers/staging/ti-st/st_kim.h
index ff3270ec784..7de2541f2de 100644
--- a/drivers/staging/ti-st/st_kim.h
+++ b/drivers/staging/ti-st/st_kim.h
@@ -43,50 +43,72 @@
  * since the self-test for chip takes a while
  */
 #define POR_RETRY_COUNT 5
-/*
- * legacy rfkill support where-in 3 rfkill
- * devices are created for the 3 gpios
- * that ST has requested
+
+/**
+ * struct chip_version - save the chip version
  */
-#define LEGACY_RFKILL_SUPPORT
-/*
- * header file for ST provided by KIM
+struct chip_version {
+	unsigned short full;
+	unsigned short chip;
+	unsigned short min_ver;
+	unsigned short maj_ver;
+};
+
+/**
+ * struct kim_data_s - the KIM internal data, embedded as the
+ *	platform's drv data. One for each ST device in the system.
+ * @uim_pid: KIM needs to communicate with UIM to request to install
+ *	the ldisc by opening UART when protocol drivers register.
+ * @kim_pdev: the platform device added in one of the board-XX.c file
+ *	in arch/XX/ directory, 1 for each ST device.
+ * @kim_rcvd: completion handler to notify when data was received,
+ *	mainly used during fw download, which involves multiple send/wait
+ *	for each of the HCI-VS commands.
+ * @ldisc_installed: completion handler to notify that the UIM accepted
+ *	the request to install ldisc, notify from tty_open which suggests
+ *	the ldisc was properly installed.
+ * @resp_buffer: data buffer for the .bts fw file name.
+ * @fw_entry: firmware class struct to request/release the fw.
+ * @gpios: the list of core/chip enable gpios for BT, FM and GPS cores.
+ * @rx_state: the rx state for kim's receive func during fw download.
+ * @rx_count: the rx count for the kim's receive func during fw download.
+ * @rx_skb: all of fw data might not come at once, and hence data storage for
+ *	whole of the fw response, only HCI_EVENTs and hence diff from ST's
+ *	response.
+ * @rfkill: rfkill data for each of the cores to be registered with rfkill.
+ * @rf_protos: proto types of the data registered with rfkill sub-system.
+ * @core_data: ST core's data, which mainly is the tty's disc_data
+ * @version: chip version available via a sysfs entry.
+ *
  */
 struct kim_data_s {
 	long uim_pid;
 	struct platform_device *kim_pdev;
 	struct completion kim_rcvd, ldisc_installed;
-	/* MAX len of the .bts firmware script name */
 	char resp_buffer[30];
 	const struct firmware *fw_entry;
 	long gpios[ST_MAX];
-	struct kobject *kim_kobj;
-/* used by kim_int_recv to validate fw response */
 	unsigned long rx_state;
 	unsigned long rx_count;
 	struct sk_buff *rx_skb;
-#ifdef LEGACY_RFKILL_SUPPORT
 	struct rfkill *rfkill[ST_MAX];
 	enum proto_type rf_protos[ST_MAX];
-#endif
 	struct st_data_s *core_data;
+	struct chip_version version;
 };
 
-long st_kim_start(void);
-long st_kim_stop(void);
-/*
- * called from st_tty_receive to authenticate fw_download
+/**
+ * functions called when 1 of the protocol drivers gets
+ * registered, these need to communicate with UIM to request
+ * ldisc installed, read chip_version, download relevant fw
  */
-void st_kim_recv(void *, const unsigned char *, long count);
+long st_kim_start(void *);
+long st_kim_stop(void *);
 
+void st_kim_recv(void *, const unsigned char *, long count);
 void st_kim_chip_toggle(enum proto_type, enum kim_gpio_state);
-
-void st_kim_complete(void);
-
-/* function called from ST KIM to ST Core, to
- * list out the protocols registered
- */
-void kim_st_list_protocols(struct st_data_s *, char *);
+void st_kim_complete(void *);
+void kim_st_list_protocols(struct st_data_s *, void *);
 
 /*
  * BTS headers
@@ -98,9 +120,13 @@ void kim_st_list_protocols(struct st_data_s *, char *);
 #define ACTION_RUN_SCRIPT       5
 #define ACTION_REMARKS          6
 
-/*
- *  * BRF Firmware header
- *   */
+/**
+ * struct bts_header - the fw file is NOT binary which can
+ *	be sent onto TTY as is. The .bts is more a script
+ *	file which has different types of actions.
+ *	Each such action needs to be parsed by the KIM and
+ *	relevant procedure to be called.
+ */
 struct bts_header {
 	uint32_t magic;
 	uint32_t version;
@@ -108,9 +134,10 @@ struct bts_header {
 	uint8_t actions[0];
 } __attribute__ ((packed));
 
-/*
- *  * BRF Actions structure
- *   */
+/**
+ * struct bts_action - Each .bts action has its own type of
+ *	data.
+ */
 struct bts_action {
 	uint16_t type;
 	uint16_t size;
@@ -136,8 +163,11 @@ struct bts_action_serial {
 	uint32_t flow_control;
 } __attribute__ ((packed));
 
-/* for identifying the change speed HCI VS
- * command
+/**
+ * struct hci_command - the HCI-VS for intrepreting
+ *	the change baud rate of host-side UART, which
+ *	needs to be ignored, since UIM would do that
+ *	when it receives request from KIM for ldisc installation.
  */
 struct hci_command {
 	uint8_t prefix;
diff --git a/drivers/staging/ti-st/st_ll.c b/drivers/staging/ti-st/st_ll.c
index 0685a100db6..7a1fb6de830 100644
--- a/drivers/staging/ti-st/st_ll.c
+++ b/drivers/staging/ti-st/st_ll.c
@@ -34,7 +34,7 @@ static void send_ll_cmd(struct st_data_s *st_data,
 
 static void ll_device_want_to_sleep(struct st_data_s *st_data)
 {
-	pr_info("%s", __func__);
+	pr_debug("%s", __func__);
 	/* sanity check */
 	if (st_data->ll_state != ST_LL_AWAKE)
 		pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
@@ -101,7 +101,7 @@ void st_ll_wakeup(struct st_data_s *ll)
 /* called when ST Core wants the state */
 unsigned long st_ll_getstate(struct st_data_s *ll)
 {
-	pr_info(" returning state %ld", ll->ll_state);
+	pr_debug(" returning state %ld", ll->ll_state);
 	return ll->ll_state;
 }
 
@@ -127,9 +127,9 @@ unsigned long st_ll_sleep_state(struct st_data_s *st_data,
 		break;
 	default:
 		pr_err(" unknown input/state ");
-		return ST_ERR_FAILURE;
+		return -1;
 	}
-	return ST_SUCCESS;
+	return 0;
 }
 
 /* Called from ST CORE to initialize ST LL */
diff --git a/drivers/staging/ti-st/st_ll.h b/drivers/staging/ti-st/st_ll.h
index 77dfbf07e7b..e4dfacd83d9 100644
--- a/drivers/staging/ti-st/st_ll.h
+++ b/drivers/staging/ti-st/st_ll.h
@@ -41,6 +41,7 @@
 #define ST_LL_AWAKE_TO_ASLEEP      3
 #define ST_LL_INVALID		   4
 
+/* different PM notifications coming from chip */
 #define LL_SLEEP_IND	0x30
 #define LL_SLEEP_ACK	0x31
 #define LL_WAKE_UP_IND	0x32
@@ -50,13 +51,19 @@
 long st_ll_init(struct st_data_s *);
 long st_ll_deinit(struct st_data_s *);
 
-/* enable/disable ST LL along with KIM start/stop
+/**
+ * enable/disable ST LL along with KIM start/stop
  * called by ST Core
  */
 void st_ll_enable(struct st_data_s *);
 void st_ll_disable(struct st_data_s *);
 
+/**
+ * various funcs used by ST core to set/get the various PM states
+ * of the chip.
+ */
 unsigned long st_ll_getstate(struct st_data_s *);
 unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
 void st_ll_wakeup(struct st_data_s *);
+
 #endif /* ST_LL_H */
diff --git a/drivers/staging/ti-st/sysfs-uim b/drivers/staging/ti-st/sysfs-uim
index 10311afcbd4..626bda51ee8 100644
--- a/drivers/staging/ti-st/sysfs-uim
+++ b/drivers/staging/ti-st/sysfs-uim
@@ -14,3 +14,15 @@ Description:
 		uninstallation would be ppolling on this device and listening
 		on events which would suggest either to install or un-install
 		line discipline
+
+What:           /sys/kernel/debug/ti-st/version
+Contact:        Pavan Savoy <pavan_savoy@ti.com>
+Description:
+		WiLink chip's ROM version exposed to user-space for some
+		proprietary protocol stacks to make use of.
+
+What:           /sys/kernel/debug/ti-st/protocols
+Contact:        Pavan Savoy <pavan_savoy@ti.com>
+Description:
+		The reason for chip being ON, the list of protocols registered.
+
diff --git a/drivers/staging/tidspbridge/Documentation/CONTRIBUTORS b/drivers/staging/tidspbridge/Documentation/CONTRIBUTORS
new file mode 100644
index 00000000000..86f578727f9
--- /dev/null
+++ b/drivers/staging/tidspbridge/Documentation/CONTRIBUTORS
@@ -0,0 +1,45 @@
+TI DSP/Bridge Driver - Contributors File
+
+The DSP/Bridge project wish to thank all of its contributors, current bridge
+driver is the result of the work of all of them. If any name is accidentally
+omitted, let us know by sending a mail to omar.ramirez@ti.com or
+x095840@ti.com.
+
+Please keep the following list in alphabetical order.
+
+	Suman Anna
+	Sripal Bagadia
+	Felipe Balbi
+	Ohad Ben-Cohen
+	Phil Carmody
+	Deepak Chitriki
+	Felipe Contreras
+	Hiroshi Doyu
+	Seth Forshee
+	Ivan Gomez Castellanos
+	Mark Grosen
+	Ramesh Gupta G
+	Fernando Guzman Lugo
+	Axel Haslam
+	Janet Head
+	Shivananda Hebbar
+	Hari Kanigeri
+	Tony Lindgren
+	Antonio Luna
+	Hari Nagalla
+	Nishanth Menon
+	Ameya Palande
+	Vijay Pasam
+	Gilbert Pitney
+	Omar Ramirez Luna
+	Ernesto Ramos
+	Chris Ring
+	Larry Schiefer
+	Rebecca Schultz Zavin
+	Bhavin Shah
+	Andy Shevchenko
+	Jeff Taylor
+	Roman Tereshonkov
+	Armando Uribe de Leon
+	Nischal Varide
+	Wenbiao Wang
diff --git a/drivers/staging/tidspbridge/Documentation/README b/drivers/staging/tidspbridge/Documentation/README
new file mode 100644
index 00000000000..df6d371161e
--- /dev/null
+++ b/drivers/staging/tidspbridge/Documentation/README
@@ -0,0 +1,70 @@
+                        Linux DSP/BIOS Bridge release
+
+DSP/BIOS Bridge overview
+========================
+
+DSP/BIOS Bridge is designed for platforms that contain a GPP and one or more
+attached DSPs.  The GPP is considered the master or "host" processor, and the
+attached DSPs are processing resources that can be utilized by applications
+and drivers running on the GPP.
+
+The abstraction that DSP/BIOS Bridge supplies, is a direct link between a GPP
+program and a DSP task.  This communication link is partitioned into two
+types of sub-links:  messaging (short, fixed-length packets) and data
+streaming (multiple, large buffers).  Each sub-link operates independently,
+and features in-order delivery of data, meaning that messages are delivered
+in the order they were submitted to the message link, and stream buffers are
+delivered in the order they were submitted to the stream link.
+
+In addition, a GPP client can specify what inputs and outputs a DSP task
+uses. DSP tasks typically use message objects for passing control and status
+information and stream objects for efficient streaming of real-time data.
+
+GPP Software Architecture
+=========================
+
+A GPP application communicates with its associated DSP task running on the
+DSP subsystem using the DSP/BIOS Bridge API. For example, a GPP audio
+application can use the API to pass messages to a DSP task that is managing
+data flowing from analog-to-digital converters (ADCs) to digital-to-analog
+converters (DACs).
+
+From the perspective of the GPP OS, the DSP is treated as just another
+peripheral device.   Most high level GPP OS typically support a device driver
+model, whereby applications can safely access and share a hardware peripheral
+through standard driver interfaces.  Therefore, to allow multiple GPP
+applications to share access to the DSP, the GPP side of DSP/BIOS Bridge
+implements a device driver for the DSP.
+
+Since driver interfaces are not always standard across GPP OS, and to provide
+some level of interoperability of application code using DSP/BIOS Bridge
+between GPP OS, DSP/BIOS Bridge provides a standard library of APIs which
+wrap calls into the device driver.   So, rather than calling GPP OS specific
+driver interfaces, applications (and even other device drivers) can use the
+standard API library directly.
+
+DSP Software Architecture
+=========================
+
+For DSP/BIOS, DSP/BIOS Bridge adds a device-independent streaming I/O (STRM)
+interface, a messaging interface (NODE), and a Resource Manager (RM) Server.
+The RM Server runs as a task of DSP/BIOS and is subservient to commands
+and queries from the GPP.  It executes commands to start and stop DSP signal
+processing nodes in response to GPP programs making requests through the
+(GPP-side) API.
+
+DSP tasks started by the RM Server are similar to any other DSP task with two
+important differences:  they must follow a specific task model consisting of
+three C-callable functions (node create, execute, and delete), with specific
+sets of arguments, and they have a pre-defined task environment established
+by the RM Server.
+
+Tasks started by the RM Server communicate using the STRM and NODE interfaces
+and act as servers for their corresponding GPP clients, performing signal
+processing functions as requested by messages sent by their GPP client.
+Typically, a DSP task moves data from source devices to sink devices using
+device independent I/O streams, performing application-specific processing
+and transformations on the data while it is moved.  For example, an audio
+task might perform audio decompression (ADPCM, MPEG, CELP) on data received
+from a GPP audio driver and then send the decompressed linear samples to a
+digital-to-analog converter.
diff --git a/drivers/staging/tidspbridge/Documentation/error-codes b/drivers/staging/tidspbridge/Documentation/error-codes
new file mode 100644
index 00000000000..12826e2a3aa
--- /dev/null
+++ b/drivers/staging/tidspbridge/Documentation/error-codes
@@ -0,0 +1,157 @@
+			DSP/Bridge Error Code Guide
+
+
+Success code is always taken as 0, except for one case where a success status
+different than 0 can be possible, this is when enumerating a series of dsp
+objects, if the enumeration doesn't have any more objects it is considered as a
+successful case. In this case a positive ENODATA is returned (TODO: Change to
+avoid this case).
+
+Error codes are returned as a negative 1, if an specific code is expected, it
+can be propagated to user space by reading errno symbol defined in errno.h, for
+specific details on the implementation a copy of the standard used should be
+read first.
+
+The error codes used by this driver are:
+
+[EPERM]
+    General driver failure.
+
+    According to the use case the following might apply:
+    - Device is in 'sleep/suspend' mode due to DPM.
+    - User cannot mark end of stream on an input channel.
+    - Requested operation is invalid for the node type.
+    - Invalid alignment for the node messaging buffer.
+    - The specified direction is invalid for the stream.
+    - Invalid stream mode.
+
+[ENOENT]
+    The specified object or file was not found.
+
+[ESRCH]
+    A shared memory buffer contained in a message or stream could not be mapped
+    to the GPP client process's virtual space.
+
+[EIO]
+    Driver interface I/O error.
+
+    or:
+    - Unable to plug channel ISR for configured IRQ.
+    - No free I/O request packets are available.
+
+[ENXIO]
+    Unable to find a named section in DSP executable or a non-existent memory
+    segment identifier was specified.
+
+[EBADF]
+    General error for file handling:
+
+    - Unable to open file.
+    - Unable to read file.
+    - An error occurred while parsing the DSP executable file.
+
+[ENOMEM]
+    A memory allocation failure occurred.
+
+[EACCES]
+    - Unable to read content of DCD data section; this is typically caused by
+    improperly configured nodes.
+    - Unable to decode DCD data section content; this is typically caused by
+    changes to DSP/BIOS Bridge data structures.
+    - Unable to get pointer to DCD data section; this is typically caused by
+    improperly configured UUIDs.
+    - Unable to load file containing DCD data section; this is typically
+    caused by a missing COFF file.
+    - The specified COFF file does not contain a valid node registration
+    section.
+
+[EFAULT]
+    Invalid pointer or handler.
+
+[EEXIST]
+    Attempted to create a channel manager  when one already exists.
+
+[EINVAL]
+    Invalid argument.
+
+[ESPIPE]
+    Symbol not found in the COFF file.  DSPNode_Create will return this if
+    the iAlg function table for an xDAIS socket is not found in the COFF file.
+    In this case, force the symbol to be linked into the COFF file.
+    DSPNode_Create, DSPNode_Execute, and DSPNode_Delete will return this if
+    the create, execute, or delete phase function, respectively, could not be
+    found in the COFF file.
+
+    - No symbol table is loaded/found for this board.
+    - Unable to initialize the ZL COFF parsing module.
+
+[EPIPE]
+    I/O is currently pending.
+
+    - End of stream was already requested on this output channel.
+
+[EDOM]
+    A parameter is specified outside its valid range.
+
+[ENOSYS]
+    The indicated operation is not supported.
+
+[EIDRM]
+    During enumeration a change in the number or properties of the objects
+    has occurred.
+
+[ECHRNG]
+    Attempt to created channel manager with too many channels or channel ID out
+    of range.
+
+[EBADR]
+    The state of the specified object is incorrect for the requested operation.
+
+    - Invalid segment ID.
+
+[ENODATA]
+    Unable to retrieve resource information from the registry.
+
+    - No more registry values.
+
+[ETIME]
+    A timeout occurred before the requested operation could complete.
+
+[ENOSR]
+    A stream has been issued the maximum number of buffers allowed in the
+    stream at once; buffers must be reclaimed from the stream before any more
+    can be issued.
+
+    - No free channels are available.
+
+[EILSEQ]
+    Error occurred in a dynamic loader library function.
+
+[EISCONN]
+    The Specified Connection already exists.
+
+[ENOTCONN]
+    Nodes not connected.
+
+[ETIMEDOUT]
+    Timeout occurred waiting for a response from the hardware.
+
+    - Wait for flush operation on an output channel timed out.
+
+[ECONNREFUSED]
+    No more connections can be made for this node.
+
+[EALREADY]
+    Channel is already in use.
+
+[EREMOTEIO]
+    dwTimeOut parameter was CHNL_IOCNOWAIT, yet no I/O completions were
+    queued.
+
+[ECANCELED]
+    I/O has been cancelled on this channel.
+
+[ENOKEY]
+    Invalid subkey parameter.
+
+    - UUID not found in registry.
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
new file mode 100644
index 00000000000..93de4f2e8bf
--- /dev/null
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -0,0 +1,90 @@
+#
+# DSP Bridge Driver Support
+#
+
+menuconfig TIDSPBRIDGE
+	tristate "DSP Bridge driver"
+	depends on ARCH_OMAP3
+	select OMAP_MBOX_FWK
+	help
+	  DSP/BIOS Bridge is designed for platforms that contain a GPP and
+	  one or more attached DSPs.  The GPP is considered the master or
+	  "host" processor, and the attached DSPs are processing resources
+	  that can be utilized by applications and drivers running on the GPP.
+
+	  This driver depends on OMAP Mailbox (OMAP_MBOX_FWK).
+
+config TIDSPBRIDGE_DVFS
+	bool "Enable Bridge Dynamic Voltage and Frequency Scaling (DVFS)"
+	depends on TIDSPBRIDGE && OMAP_PM_SRF && CPU_FREQ
+	help
+	  DVFS allows DSP Bridge to initiate the operating point change to
+	  scale the chip voltage and frequency in order to match the
+	  performance and power consumption to the current processing
+	  requirements.
+
+config TIDSPBRIDGE_MEMPOOL_SIZE
+	hex "Physical memory pool size (Byte)"
+	depends on TIDSPBRIDGE
+	default 0x600000
+	help
+	  Allocate specified size of memory at booting time to avoid allocation
+	  failure under heavy memory fragmentation after some use time.
+
+config TIDSPBRIDGE_DEBUG
+	bool "Debug Support"
+	depends on TIDSPBRIDGE
+	help
+	  Say Y to enable Bridge debugging capabilities
+
+config TIDSPBRIDGE_RECOVERY
+	bool "Recovery Support"
+	depends on TIDSPBRIDGE
+	default y
+	help
+	  In case of DSP fatal error, BRIDGE driver will try to
+	  recover itself.
+
+config TIDSPBRIDGE_CACHE_LINE_CHECK
+	bool "Check buffers to be 128 byte aligned"
+	depends on TIDSPBRIDGE
+	help
+	  When the DSP processes data, the DSP cache controller loads 128-Byte
+	  chunks (lines) from SDRAM and writes the data back in 128-Byte chunks.
+	  If a DMM buffer does not start and end on a 128-Byte boundary, the data
+	  preceding the start address (SA) from the 128-Byte boundary to the SA
+	  and the data at addresses trailing the end address (EA) from the EA to
+	  the next 128-Byte boundary will be loaded and written back as well.
+	  This can lead to heap corruption. Say Y, to enforce the check for 128
+	  byte alignment, buffers failing this check will be rejected.
+
+config TIDSPBRIDGE_WDT3
+	bool "Enable watchdog timer"
+	depends on TIDSPBRIDGE
+	help
+	  WTD3 is managed by DSP and once it is enabled, DSP side bridge is in
+	  charge of refreshing the timer before overflow, if the DSP hangs MPU
+	  will caught the interrupt and try to recover DSP.
+
+config TIDSPBRIDGE_WDT_TIMEOUT
+	int "Watchdog timer timeout (in secs)"
+	depends on TIDSPBRIDGE && TIDSPBRIDGE_WDT3
+	default 5
+	help
+	   Watchdog timer timeout value, after that time if the watchdog timer
+	   counter is not reset the wdt overflow interrupt will be triggered
+
+config TIDSPBRIDGE_NTFY_PWRERR
+	bool "Notify power errors"
+	depends on TIDSPBRIDGE
+	help
+	  Enable notifications to registered clients on the event of power errror
+	  trying to suspend bridge driver. Say Y, to signal this event as a fatal
+	  error, this will require a bridge restart to recover.
+
+config TIDSPBRIDGE_BACKTRACE
+	bool "Dump backtraces on fatal errors"
+	depends on TIDSPBRIDGE
+	help
+	  Enable useful information to backtrace fatal errors. Say Y if you
+	  want to dump information for testing purposes.
diff --git a/drivers/staging/tidspbridge/Makefile b/drivers/staging/tidspbridge/Makefile
new file mode 100644
index 00000000000..65671724e6f
--- /dev/null
+++ b/drivers/staging/tidspbridge/Makefile
@@ -0,0 +1,34 @@
+obj-$(CONFIG_TIDSPBRIDGE)	+= bridgedriver.o
+
+libgen = gen/gb.o gen/gs.o gen/gh.o gen/uuidutil.o
+libservices = services/sync.o services/cfg.o \
+		services/ntfy.o services/services.o
+libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \
+		core/tiomap3430_pwr.o core/tiomap_io.o \
+		core/ue_deh.o core/wdt.o core/dsp-clock.o
+libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \
+		pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o
+librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
+		rmgr/proc.o rmgr/pwr.o rmgr/rmm.o rmgr/strm.o rmgr/dspdrv.o \
+		rmgr/nldr.o rmgr/drv_interface.o
+libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \
+		 dynload/tramp.o
+libhw = hw/hw_mmu.o
+
+bridgedriver-objs = $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \
+			$(libdload) $(libhw)
+
+#Machine dependent
+ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \
+		-DTICFG_PROC_VER -DTICFG_EVM_TYPE -DCHNL_SMCLASS \
+		-DCHNL_MESSAGES -DUSE_LEVEL_1_MACROS
+
+ccflags-y += -Idrivers/staging/tidspbridge/include
+ccflags-y += -Idrivers/staging/tidspbridge/services
+ccflags-y += -Idrivers/staging/tidspbridge/core
+ccflags-y += -Idrivers/staging/tidspbridge/pmgr
+ccflags-y += -Idrivers/staging/tidspbridge/rmgr
+ccflags-y += -Idrivers/staging/tidspbridge/dynload
+ccflags-y += -Idrivers/staging/tidspbridge/hw
+ccflags-y += -Iarch/arm
+
diff --git a/drivers/staging/tidspbridge/TODO b/drivers/staging/tidspbridge/TODO
new file mode 100644
index 00000000000..54f4a296738
--- /dev/null
+++ b/drivers/staging/tidspbridge/TODO
@@ -0,0 +1,18 @@
+* Migrate to (and if necessary, extend) existing upstream code such as 
+  iommu, wdt, mcbsp, gptimers
+* Decouple hardware-specific code (e.g. bridge_brd_start/stop/delete/monitor)
+* DOFF binary loader: consider pushing to user space. at the very least
+  eliminate the direct filesystem access
+* Eliminate general services and libraries - use or extend existing kernel
+  libraries instead (e.g. gcf/lcm in nldr.c, global helpers in gen/)
+* Eliminate direct manipulation of OMAP_SYSC_BASE
+* Eliminate list.h : seem like a redundant wrapper to existing kernel lists
+* Eliminate DSP_SUCCEEDED macros and their imposed redundant indentations
+  (adopt the kernel way of checking for return values)
+* Audit interfaces exposed to user space
+* Audit and clean up header files folder
+* Use kernel coding style
+* checkpatch.pl fixes
+
+Please send any patches to Greg Kroah-Hartman <greg@kroah.com>
+and Omar Ramirez Luna <omar.ramirez@ti.com>.
diff --git a/drivers/staging/tidspbridge/core/_cmm.h b/drivers/staging/tidspbridge/core/_cmm.h
new file mode 100644
index 00000000000..7660bef6ebb
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/_cmm.h
@@ -0,0 +1,45 @@
+/*
+ * _cmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private header file defining CMM manager objects and defines needed
+ * by IO manager to register shared memory regions when DSP base image
+ * is loaded(bridge_io_on_loaded).
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _CMM_
+#define _CMM_
+
+/*
+ *  These target side symbols define the beginning and ending addresses
+ *  of the section of shared memory used for shared memory manager CMM.
+ *  They are defined in the *cfg.cmd file by cdb code.
+ */
+#define SHM0_SHARED_BASE_SYM             "_SHM0_BEG"
+#define SHM0_SHARED_END_SYM              "_SHM0_END"
+#define SHM0_SHARED_RESERVED_BASE_SYM    "_SHM0_RSVDSTRT"
+
+/*
+ *  Shared Memory Region #0(SHMSEG0) is used in the following way:
+ *
+ *  |(_SHM0_BEG)                  | (_SHM0_RSVDSTRT)           | (_SHM0_END)
+ *  V                             V                            V
+ *  ------------------------------------------------------------
+ *  |     DSP-side allocations    |    GPP-side allocations    |
+ *  ------------------------------------------------------------
+ *
+ *
+ */
+
+#endif /* _CMM_ */
diff --git a/drivers/staging/tidspbridge/core/_deh.h b/drivers/staging/tidspbridge/core/_deh.h
new file mode 100644
index 00000000000..16723cd3483
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/_deh.h
@@ -0,0 +1,35 @@
+/*
+ * _deh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private header for DEH module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2010 Felipe Contreras
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _DEH_
+#define _DEH_
+
+#include <dspbridge/ntfy.h>
+#include <dspbridge/dspdefs.h>
+
+/* DEH Manager: only one created per board: */
+struct deh_mgr {
+	struct bridge_dev_context *hbridge_context;	/* Bridge context. */
+	struct ntfy_object *ntfy_obj;	/* NTFY object */
+
+	/* MMU Fault DPC */
+	struct tasklet_struct dpc_tasklet;
+};
+
+#endif /* _DEH_ */
diff --git a/drivers/staging/tidspbridge/core/_msg_sm.h b/drivers/staging/tidspbridge/core/_msg_sm.h
new file mode 100644
index 00000000000..556de5c025d
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/_msg_sm.h
@@ -0,0 +1,142 @@
+/*
+ * _msg_sm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private header file defining msg_ctrl manager objects and defines needed
+ * by IO manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MSG_SM_
+#define _MSG_SM_
+
+#include <dspbridge/list.h>
+#include <dspbridge/msgdefs.h>
+
+/*
+ *  These target side symbols define the beginning and ending addresses
+ *  of the section of shared memory used for messages. They are
+ *  defined in the *cfg.cmd file by cdb code.
+ */
+#define MSG_SHARED_BUFFER_BASE_SYM      "_MSG_BEG"
+#define MSG_SHARED_BUFFER_LIMIT_SYM     "_MSG_END"
+
+#ifndef _CHNL_WORDSIZE
+#define _CHNL_WORDSIZE 4	/* default _CHNL_WORDSIZE is 2 bytes/word */
+#endif
+
+/*
+ *  ======== msg_ctrl ========
+ *  There is a control structure for messages to the DSP, and a control
+ *  structure for messages from the DSP. The shared memory region for
+ *  transferring messages is partitioned as follows:
+ *
+ *  ----------------------------------------------------------
+ *  |Control | Messages from DSP | Control | Messages to DSP |
+ *  ----------------------------------------------------------
+ *
+ *  msg_ctrl control structure for messages to the DSP is used in the following
+ *  way:
+ *
+ *  buf_empty -      This flag is set to FALSE by the GPP after it has output
+ *                  messages for the DSP. The DSP host driver sets it to
+ *                  TRUE after it has copied the messages.
+ *  post_swi -       Set to 1 by the GPP after it has written the messages,
+ *                  set the size, and set buf_empty to FALSE.
+ *                  The DSP Host driver uses SWI_andn of the post_swi field
+ *                  when a host interrupt occurs. The host driver clears
+ *                  this after posting the SWI.
+ *  size -          Number of messages to be read by the DSP.
+ *
+ *  For messages from the DSP:
+ *  buf_empty -      This flag is set to FALSE by the DSP after it has output
+ *                  messages for the GPP. The DPC on the GPP sets it to
+ *                  TRUE after it has copied the messages.
+ *  post_swi -       Set to 1 the DPC on the GPP after copying the messages.
+ *  size -          Number of messages to be read by the GPP.
+ */
+struct msg_ctrl {
+	u32 buf_empty;		/* to/from DSP buffer is empty */
+	u32 post_swi;		/* Set to "1" to post msg_ctrl SWI */
+	u32 size;		/* Number of messages to/from the DSP */
+	u32 resvd;
+};
+
+/*
+ *  ======== msg_mgr ========
+ *  The msg_mgr maintains a list of all MSG_QUEUEs. Each NODE object can
+ *  have msg_queue to hold all messages that come up from the corresponding
+ *  node on the DSP. The msg_mgr also has a shared queue of messages
+ *  ready to go to the DSP.
+ */
+struct msg_mgr {
+	/* The first field must match that in msgobj.h */
+
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+
+	struct io_mgr *hio_mgr;	/* IO manager */
+	struct lst_list *queue_list;	/* List of MSG_QUEUEs */
+	spinlock_t msg_mgr_lock;	/* For critical sections */
+	/* Signalled when MsgFrame is available */
+	struct sync_object *sync_event;
+	struct lst_list *msg_free_list;	/* Free MsgFrames ready to be filled */
+	struct lst_list *msg_used_list;	/* MsgFrames ready to go to DSP */
+	u32 msgs_pending;	/* # of queued messages to go to DSP */
+	u32 max_msgs;		/* Max # of msgs that fit in buffer */
+	msg_onexit on_exit;	/* called when RMS_EXIT is received */
+};
+
+/*
+ *  ======== msg_queue ========
+ *  Each NODE has a msg_queue for receiving messages from the
+ *  corresponding node on the DSP. The msg_queue object maintains a list
+ *  of messages that have been sent to the host, but not yet read (MSG_Get),
+ *  and a list of free frames that can be filled when new messages arrive
+ *  from the DSP.
+ *  The msg_queue's hSynEvent gets posted when a message is ready.
+ */
+struct msg_queue {
+	struct list_head list_elem;
+	struct msg_mgr *hmsg_mgr;
+	u32 max_msgs;		/* Node message depth */
+	u32 msgq_id;		/* Node environment pointer */
+	struct lst_list *msg_free_list;	/* Free MsgFrames ready to be filled */
+	/* Filled MsgFramess waiting to be read */
+	struct lst_list *msg_used_list;
+	void *arg;		/* Handle passed to mgr on_exit callback */
+	struct sync_object *sync_event;	/* Signalled when message is ready */
+	struct sync_object *sync_done;	/* For synchronizing cleanup */
+	struct sync_object *sync_done_ack;	/* For synchronizing cleanup */
+	struct ntfy_object *ntfy_obj;	/* For notification of message ready */
+	bool done;		/* TRUE <==> deleting the object */
+	u32 io_msg_pend;	/* Number of pending MSG_get/put calls */
+};
+
+/*
+ *  ======== msg_dspmsg ========
+ */
+struct msg_dspmsg {
+	struct dsp_msg msg;
+	u32 msgq_id;		/* Identifies the node the message goes to */
+};
+
+/*
+ *  ======== msg_frame ========
+ */
+struct msg_frame {
+	struct list_head list_elem;
+	struct msg_dspmsg msg_data;
+};
+
+#endif /* _MSG_SM_ */
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
new file mode 100644
index 00000000000..1c1f157e167
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -0,0 +1,371 @@
+/*
+ * _tiomap.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definitions and types private to this Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _TIOMAP_
+#define _TIOMAP_
+
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+#include <mach-omap2/prm-regbits-34xx.h>
+#include <mach-omap2/cm-regbits-34xx.h>
+#include <dspbridge/devdefs.h>
+#include <hw_defs.h>
+#include <dspbridge/dspioctl.h>	/* for bridge_ioctl_extproc defn */
+#include <dspbridge/sync.h>
+#include <dspbridge/clk.h>
+
+struct map_l4_peripheral {
+	u32 phys_addr;
+	u32 dsp_virt_addr;
+};
+
+#define ARM_MAILBOX_START               0xfffcf000
+#define ARM_MAILBOX_LENGTH              0x800
+
+/* New Registers in OMAP3.1 */
+
+#define TESTBLOCK_ID_START              0xfffed400
+#define TESTBLOCK_ID_LENGTH             0xff
+
+/* ID Returned by OMAP1510 */
+#define TBC_ID_VALUE                    0xB47002F
+
+#define SPACE_LENGTH                    0x2000
+#define API_CLKM_DPLL_DMA               0xfffec000
+#define ARM_INTERRUPT_OFFSET            0xb00
+
+#define BIOS24XX
+
+#define L4_PERIPHERAL_NULL          0x0
+#define DSPVA_PERIPHERAL_NULL       0x0
+
+#define MAX_LOCK_TLB_ENTRIES 15
+
+#define L4_PERIPHERAL_PRM        0x48306000	/*PRM L4 Peripheral */
+#define DSPVA_PERIPHERAL_PRM     0x1181e000
+#define L4_PERIPHERAL_SCM        0x48002000	/*SCM L4 Peripheral */
+#define DSPVA_PERIPHERAL_SCM     0x1181f000
+#define L4_PERIPHERAL_MMU        0x5D000000	/*MMU L4 Peripheral */
+#define DSPVA_PERIPHERAL_MMU     0x11820000
+#define L4_PERIPHERAL_CM        0x48004000	/* Core L4, Clock Management */
+#define DSPVA_PERIPHERAL_CM     0x1181c000
+#define L4_PERIPHERAL_PER        0x48005000	/*  PER */
+#define DSPVA_PERIPHERAL_PER     0x1181d000
+
+#define L4_PERIPHERAL_GPIO1       0x48310000
+#define DSPVA_PERIPHERAL_GPIO1    0x11809000
+#define L4_PERIPHERAL_GPIO2       0x49050000
+#define DSPVA_PERIPHERAL_GPIO2    0x1180a000
+#define L4_PERIPHERAL_GPIO3       0x49052000
+#define DSPVA_PERIPHERAL_GPIO3    0x1180b000
+#define L4_PERIPHERAL_GPIO4       0x49054000
+#define DSPVA_PERIPHERAL_GPIO4    0x1180c000
+#define L4_PERIPHERAL_GPIO5       0x49056000
+#define DSPVA_PERIPHERAL_GPIO5    0x1180d000
+
+#define L4_PERIPHERAL_IVA2WDT      0x49030000
+#define DSPVA_PERIPHERAL_IVA2WDT   0x1180e000
+
+#define L4_PERIPHERAL_DISPLAY     0x48050000
+#define DSPVA_PERIPHERAL_DISPLAY  0x1180f000
+
+#define L4_PERIPHERAL_SSI         0x48058000
+#define DSPVA_PERIPHERAL_SSI      0x11804000
+#define L4_PERIPHERAL_GDD         0x48059000
+#define DSPVA_PERIPHERAL_GDD      0x11805000
+#define L4_PERIPHERAL_SS1         0x4805a000
+#define DSPVA_PERIPHERAL_SS1      0x11806000
+#define L4_PERIPHERAL_SS2         0x4805b000
+#define DSPVA_PERIPHERAL_SS2      0x11807000
+
+#define L4_PERIPHERAL_CAMERA      0x480BC000
+#define DSPVA_PERIPHERAL_CAMERA   0x11819000
+
+#define L4_PERIPHERAL_SDMA        0x48056000
+#define DSPVA_PERIPHERAL_SDMA     0x11810000	/* 0x1181d000 conflict w/ PER */
+
+#define L4_PERIPHERAL_UART1             0x4806a000
+#define DSPVA_PERIPHERAL_UART1          0x11811000
+#define L4_PERIPHERAL_UART2             0x4806c000
+#define DSPVA_PERIPHERAL_UART2          0x11812000
+#define L4_PERIPHERAL_UART3             0x49020000
+#define DSPVA_PERIPHERAL_UART3    0x11813000
+
+#define L4_PERIPHERAL_MCBSP1      0x48074000
+#define DSPVA_PERIPHERAL_MCBSP1   0x11814000
+#define L4_PERIPHERAL_MCBSP2      0x49022000
+#define DSPVA_PERIPHERAL_MCBSP2   0x11815000
+#define L4_PERIPHERAL_MCBSP3      0x49024000
+#define DSPVA_PERIPHERAL_MCBSP3   0x11816000
+#define L4_PERIPHERAL_MCBSP4      0x49026000
+#define DSPVA_PERIPHERAL_MCBSP4   0x11817000
+#define L4_PERIPHERAL_MCBSP5      0x48096000
+#define DSPVA_PERIPHERAL_MCBSP5   0x11818000
+
+#define L4_PERIPHERAL_GPTIMER5    0x49038000
+#define DSPVA_PERIPHERAL_GPTIMER5 0x11800000
+#define L4_PERIPHERAL_GPTIMER6    0x4903a000
+#define DSPVA_PERIPHERAL_GPTIMER6 0x11801000
+#define L4_PERIPHERAL_GPTIMER7    0x4903c000
+#define DSPVA_PERIPHERAL_GPTIMER7 0x11802000
+#define L4_PERIPHERAL_GPTIMER8    0x4903e000
+#define DSPVA_PERIPHERAL_GPTIMER8 0x11803000
+
+#define L4_PERIPHERAL_SPI1      0x48098000
+#define DSPVA_PERIPHERAL_SPI1   0x1181a000
+#define L4_PERIPHERAL_SPI2      0x4809a000
+#define DSPVA_PERIPHERAL_SPI2   0x1181b000
+
+#define L4_PERIPHERAL_MBOX        0x48094000
+#define DSPVA_PERIPHERAL_MBOX     0x11808000
+
+#define PM_GRPSEL_BASE 			0x48307000
+#define DSPVA_GRPSEL_BASE 		0x11821000
+
+#define L4_PERIPHERAL_SIDETONE_MCBSP2        0x49028000
+#define DSPVA_PERIPHERAL_SIDETONE_MCBSP2 0x11824000
+#define L4_PERIPHERAL_SIDETONE_MCBSP3        0x4902a000
+#define DSPVA_PERIPHERAL_SIDETONE_MCBSP3 0x11825000
+
+/* define a static array with L4 mappings */
+static const struct map_l4_peripheral l4_peripheral_table[] = {
+	{L4_PERIPHERAL_MBOX, DSPVA_PERIPHERAL_MBOX},
+	{L4_PERIPHERAL_SCM, DSPVA_PERIPHERAL_SCM},
+	{L4_PERIPHERAL_MMU, DSPVA_PERIPHERAL_MMU},
+	{L4_PERIPHERAL_GPTIMER5, DSPVA_PERIPHERAL_GPTIMER5},
+	{L4_PERIPHERAL_GPTIMER6, DSPVA_PERIPHERAL_GPTIMER6},
+	{L4_PERIPHERAL_GPTIMER7, DSPVA_PERIPHERAL_GPTIMER7},
+	{L4_PERIPHERAL_GPTIMER8, DSPVA_PERIPHERAL_GPTIMER8},
+	{L4_PERIPHERAL_GPIO1, DSPVA_PERIPHERAL_GPIO1},
+	{L4_PERIPHERAL_GPIO2, DSPVA_PERIPHERAL_GPIO2},
+	{L4_PERIPHERAL_GPIO3, DSPVA_PERIPHERAL_GPIO3},
+	{L4_PERIPHERAL_GPIO4, DSPVA_PERIPHERAL_GPIO4},
+	{L4_PERIPHERAL_GPIO5, DSPVA_PERIPHERAL_GPIO5},
+	{L4_PERIPHERAL_IVA2WDT, DSPVA_PERIPHERAL_IVA2WDT},
+	{L4_PERIPHERAL_DISPLAY, DSPVA_PERIPHERAL_DISPLAY},
+	{L4_PERIPHERAL_SSI, DSPVA_PERIPHERAL_SSI},
+	{L4_PERIPHERAL_GDD, DSPVA_PERIPHERAL_GDD},
+	{L4_PERIPHERAL_SS1, DSPVA_PERIPHERAL_SS1},
+	{L4_PERIPHERAL_SS2, DSPVA_PERIPHERAL_SS2},
+	{L4_PERIPHERAL_UART1, DSPVA_PERIPHERAL_UART1},
+	{L4_PERIPHERAL_UART2, DSPVA_PERIPHERAL_UART2},
+	{L4_PERIPHERAL_UART3, DSPVA_PERIPHERAL_UART3},
+	{L4_PERIPHERAL_MCBSP1, DSPVA_PERIPHERAL_MCBSP1},
+	{L4_PERIPHERAL_MCBSP2, DSPVA_PERIPHERAL_MCBSP2},
+	{L4_PERIPHERAL_MCBSP3, DSPVA_PERIPHERAL_MCBSP3},
+	{L4_PERIPHERAL_MCBSP4, DSPVA_PERIPHERAL_MCBSP4},
+	{L4_PERIPHERAL_MCBSP5, DSPVA_PERIPHERAL_MCBSP5},
+	{L4_PERIPHERAL_CAMERA, DSPVA_PERIPHERAL_CAMERA},
+	{L4_PERIPHERAL_SPI1, DSPVA_PERIPHERAL_SPI1},
+	{L4_PERIPHERAL_SPI2, DSPVA_PERIPHERAL_SPI2},
+	{L4_PERIPHERAL_PRM, DSPVA_PERIPHERAL_PRM},
+	{L4_PERIPHERAL_CM, DSPVA_PERIPHERAL_CM},
+	{L4_PERIPHERAL_PER, DSPVA_PERIPHERAL_PER},
+	{PM_GRPSEL_BASE, DSPVA_GRPSEL_BASE},
+	{L4_PERIPHERAL_SIDETONE_MCBSP2, DSPVA_PERIPHERAL_SIDETONE_MCBSP2},
+	{L4_PERIPHERAL_SIDETONE_MCBSP3, DSPVA_PERIPHERAL_SIDETONE_MCBSP3},
+	{L4_PERIPHERAL_NULL, DSPVA_PERIPHERAL_NULL}
+};
+
+/*
+ *   15         10                  0
+ *   ---------------------------------
+ *  |0|0|1|0|0|0|c|c|c|i|i|i|i|i|i|i|
+ *  ---------------------------------
+ *  |  (class)  | (module specific) |
+ *
+ *  where  c -> Externel Clock Command: Clk & Autoidle Disable/Enable
+ *  i -> External Clock ID Timers 5,6,7,8, McBSP1,2 and WDT3
+ */
+
+/* MBX_PM_CLK_IDMASK: DSP External clock id mask. */
+#define MBX_PM_CLK_IDMASK   0x7F
+
+/* MBX_PM_CLK_CMDSHIFT: DSP External clock command shift. */
+#define MBX_PM_CLK_CMDSHIFT 7
+
+/* MBX_PM_CLK_CMDMASK: DSP External clock command mask. */
+#define MBX_PM_CLK_CMDMASK 7
+
+/* MBX_PM_MAX_RESOURCES: CORE 1 Clock resources. */
+#define MBX_CORE1_RESOURCES 7
+
+/* MBX_PM_MAX_RESOURCES: CORE 2 Clock Resources. */
+#define MBX_CORE2_RESOURCES 1
+
+/* MBX_PM_MAX_RESOURCES: TOTAL Clock Reosurces. */
+#define MBX_PM_MAX_RESOURCES 11
+
+/*  Power Management Commands */
+#define BPWR_DISABLE_CLOCK	0
+#define BPWR_ENABLE_CLOCK	1
+
+/* OMAP242x specific resources */
+enum bpwr_ext_clock_id {
+	BPWR_GP_TIMER5 = 0x10,
+	BPWR_GP_TIMER6,
+	BPWR_GP_TIMER7,
+	BPWR_GP_TIMER8,
+	BPWR_WD_TIMER3,
+	BPWR_MCBSP1,
+	BPWR_MCBSP2,
+	BPWR_MCBSP3,
+	BPWR_MCBSP4,
+	BPWR_MCBSP5,
+	BPWR_SSI = 0x20
+};
+
+static const u32 bpwr_clkid[] = {
+	(u32) BPWR_GP_TIMER5,
+	(u32) BPWR_GP_TIMER6,
+	(u32) BPWR_GP_TIMER7,
+	(u32) BPWR_GP_TIMER8,
+	(u32) BPWR_WD_TIMER3,
+	(u32) BPWR_MCBSP1,
+	(u32) BPWR_MCBSP2,
+	(u32) BPWR_MCBSP3,
+	(u32) BPWR_MCBSP4,
+	(u32) BPWR_MCBSP5,
+	(u32) BPWR_SSI
+};
+
+struct bpwr_clk_t {
+	u32 clk_id;
+	enum dsp_clk_id clk;
+};
+
+static const struct bpwr_clk_t bpwr_clks[] = {
+	{(u32) BPWR_GP_TIMER5, DSP_CLK_GPT5},
+	{(u32) BPWR_GP_TIMER6, DSP_CLK_GPT6},
+	{(u32) BPWR_GP_TIMER7, DSP_CLK_GPT7},
+	{(u32) BPWR_GP_TIMER8, DSP_CLK_GPT8},
+	{(u32) BPWR_WD_TIMER3, DSP_CLK_WDT3},
+	{(u32) BPWR_MCBSP1, DSP_CLK_MCBSP1},
+	{(u32) BPWR_MCBSP2, DSP_CLK_MCBSP2},
+	{(u32) BPWR_MCBSP3, DSP_CLK_MCBSP3},
+	{(u32) BPWR_MCBSP4, DSP_CLK_MCBSP4},
+	{(u32) BPWR_MCBSP5, DSP_CLK_MCBSP5},
+	{(u32) BPWR_SSI, DSP_CLK_SSI}
+};
+
+/* Interrupt Register Offsets */
+#define INTH_IT_REG_OFFSET              0x00	/* Interrupt register offset */
+#define INTH_MASK_IT_REG_OFFSET         0x04	/* Mask Interrupt reg offset */
+
+#define   DSP_MAILBOX1_INT              10
+/*
+ *  Bit definition of  Interrupt  Level  Registers
+ */
+
+/* Mail Box defines */
+#define MB_ARM2DSP1_REG_OFFSET          0x00
+
+#define MB_ARM2DSP1B_REG_OFFSET         0x04
+
+#define MB_DSP2ARM1B_REG_OFFSET         0x0C
+
+#define MB_ARM2DSP1_FLAG_REG_OFFSET     0x18
+
+#define MB_ARM2DSP_FLAG                 0x0001
+
+#define MBOX_ARM2DSP HW_MBOX_ID0
+#define MBOX_DSP2ARM HW_MBOX_ID1
+#define MBOX_ARM HW_MBOX_U0_ARM
+#define MBOX_DSP HW_MBOX_U1_DSP1
+
+#define ENABLE                          true
+#define DISABLE                         false
+
+#define HIGH_LEVEL                      true
+#define LOW_LEVEL                       false
+
+/* Macro's */
+#define CLEAR_BIT(reg, mask)             (reg &= ~mask)
+#define SET_BIT(reg, mask)               (reg |= mask)
+
+#define SET_GROUP_BITS16(reg, position, width, value) \
+	do {\
+		reg &= ~((0xFFFF >> (16 - (width))) << (position)) ; \
+		reg |= ((value & (0xFFFF >> (16 - (width)))) << (position)); \
+	} while (0);
+
+#define CLEAR_BIT_INDEX(reg, index)   (reg &= ~(1 << (index)))
+
+/* This Bridge driver's device context: */
+struct bridge_dev_context {
+	struct dev_object *hdev_obj;	/* Handle to Bridge device object. */
+	u32 dw_dsp_base_addr;	/* Arm's API to DSP virt base addr */
+	/*
+	 * DSP External memory prog address as seen virtually by the OS on
+	 * the host side.
+	 */
+	u32 dw_dsp_ext_base_addr;	/* See the comment above */
+	u32 dw_api_reg_base;	/* API mem map'd registers */
+	void __iomem *dw_dsp_mmu_base;	/* DSP MMU Mapped registers */
+	u32 dw_api_clk_base;	/* CLK Registers */
+	u32 dw_dsp_clk_m2_base;	/* DSP Clock Module m2 */
+	u32 dw_public_rhea;	/* Pub Rhea */
+	u32 dw_int_addr;	/* MB INTR reg */
+	u32 dw_tc_endianism;	/* TC Endianism register */
+	u32 dw_test_base;	/* DSP MMU Mapped registers */
+	u32 dw_self_loop;	/* Pointer to the selfloop */
+	u32 dw_dsp_start_add;	/* API Boot vector */
+	u32 dw_internal_size;	/* Internal memory size */
+
+	struct omap_mbox *mbox;		/* Mail box handle */
+
+	struct cfg_hostres *resources;	/* Host Resources */
+
+	/*
+	 * Processor specific info is set when prog loaded and read from DCD.
+	 * [See bridge_dev_ctrl()]  PROC info contains DSP-MMU TLB entries.
+	 */
+	/* DMMU TLB entries */
+	struct bridge_ioctl_extproc atlb_entry[BRDIOCTL_NUMOFMMUTLB];
+	u32 dw_brd_state;       /* Last known board state. */
+
+	/* TC Settings */
+	bool tc_word_swap_on;	/* Traffic Controller Word Swap */
+	struct pg_table_attrs *pt_attrs;
+	u32 dsp_per_clks;
+};
+
+/*
+ * If dsp_debug is true, do not branch to the DSP entry
+ * point and wait for DSP to boot.
+ */
+extern s32 dsp_debug;
+
+/*
+ *  ======== sm_interrupt_dsp ========
+ *  Purpose:
+ *      Set interrupt value & send an interrupt to the DSP processor(s).
+ *      This is typicaly used when mailbox interrupt mechanisms allow data
+ *      to be associated with interrupt such as for OMAP's CMD/DATA regs.
+ *  Parameters:
+ *      dev_context:    Handle to Bridge driver defined device info.
+ *      mb_val:         Value associated with interrupt(e.g. mailbox value).
+ *  Returns:
+ *      0:        Interrupt sent;
+ *      else:           Unable to send interrupt.
+ *  Requires:
+ *  Ensures:
+ */
+int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val);
+
+#endif /* _TIOMAP_ */
diff --git a/drivers/staging/tidspbridge/core/_tiomap_pwr.h b/drivers/staging/tidspbridge/core/_tiomap_pwr.h
new file mode 100644
index 00000000000..bd0354d9ad0
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/_tiomap_pwr.h
@@ -0,0 +1,85 @@
+/*
+ * _tiomap_pwr.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definitions and types for the DSP wake/sleep routines.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _TIOMAP_PWR_
+#define _TIOMAP_PWR_
+
+#ifdef CONFIG_PM
+extern s32 dsp_test_sleepstate;
+#endif
+
+extern struct mailbox_context mboxsetting;
+
+/*
+ * ======== wake_dsp =========
+ * Wakes up the DSP from DeepSleep
+ */
+extern int wake_dsp(struct bridge_dev_context *dev_context,
+							void *pargs);
+
+/*
+ * ======== sleep_dsp =========
+ * Places the DSP in DeepSleep.
+ */
+extern int sleep_dsp(struct bridge_dev_context *dev_context,
+			    u32 dw_cmd, void *pargs);
+/*
+ *  ========interrupt_dsp========
+ *  	  Sends an interrupt to DSP unconditionally.
+ */
+extern void interrupt_dsp(struct bridge_dev_context *dev_context,
+							u16 mb_val);
+
+/*
+ * ======== wake_dsp =========
+ * Wakes up the DSP from DeepSleep
+ */
+extern int dsp_peripheral_clk_ctrl(struct bridge_dev_context
+					*dev_context, void *pargs);
+/*
+ *  ======== handle_hibernation_from_dsp ========
+ *  	Handle Hibernation requested from DSP
+ */
+int handle_hibernation_from_dsp(struct bridge_dev_context *dev_context);
+/*
+ *  ======== post_scale_dsp ========
+ *  	Handle Post Scale notification to DSP
+ */
+int post_scale_dsp(struct bridge_dev_context *dev_context,
+							void *pargs);
+/*
+ *  ======== pre_scale_dsp ========
+ *  	Handle Pre Scale notification to DSP
+ */
+int pre_scale_dsp(struct bridge_dev_context *dev_context,
+							void *pargs);
+/*
+ *  ======== handle_constraints_set ========
+ *  	Handle constraints request from DSP
+ */
+int handle_constraints_set(struct bridge_dev_context *dev_context,
+				  void *pargs);
+
+/*
+ *  ======== dsp_clk_wakeup_event_ctrl ========
+ *     This function sets the group selction bits for while
+ *     enabling/disabling.
+ */
+void dsp_clk_wakeup_event_ctrl(u32 clock_id, bool enable);
+
+#endif /* _TIOMAP_PWR_ */
diff --git a/drivers/staging/tidspbridge/core/chnl_sm.c b/drivers/staging/tidspbridge/core/chnl_sm.c
new file mode 100644
index 00000000000..bee2b23a09a
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/chnl_sm.c
@@ -0,0 +1,1014 @@
+/*
+ * chnl_sm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implements upper edge functions for Bridge driver channel module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ *      The lower edge functions must be implemented by the Bridge driver
+ *      writer, and are declared in chnl_sm.h.
+ *
+ *      Care is taken in this code to prevent simulataneous access to channel
+ *      queues from
+ *      1. Threads.
+ *      2. io_dpc(), scheduled from the io_isr() as an event.
+ *
+ *      This is done primarily by:
+ *      - Semaphores.
+ *      - state flags in the channel object; and
+ *      - ensuring the IO_Dispatch() routine, which is called from both
+ *        CHNL_AddIOReq() and the DPC(if implemented), is not re-entered.
+ *
+ *  Channel Invariant:
+ *      There is an important invariant condition which must be maintained per
+ *      channel outside of bridge_chnl_get_ioc() and IO_Dispatch(), violation of
+ *      which may cause timeouts and/or failure offunction sync_wait_on_event.
+ *      This invariant condition is:
+ *
+ *          LST_Empty(pchnl->pio_completions) ==> pchnl->sync_event is reset
+ *      and
+ *          !LST_Empty(pchnl->pio_completions) ==> pchnl->sync_event is set.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Bridge Driver */
+#include <dspbridge/dspdefs.h>
+#include <dspbridge/dspchnl.h>
+#include "_tiomap.h"
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/io_sm.h>
+
+/*  ----------------------------------- Define for This */
+#define USERMODE_ADDR   PAGE_OFFSET
+
+#define MAILBOX_IRQ INT_MAIL_MPU_IRQ
+
+/*  ----------------------------------- Function Prototypes */
+static struct lst_list *create_chirp_list(u32 chirps);
+
+static void free_chirp_list(struct lst_list *chirp_list);
+
+static struct chnl_irp *make_new_chirp(void);
+
+static int search_free_channel(struct chnl_mgr *chnl_mgr_obj,
+				      u32 *chnl);
+
+/*
+ *  ======== bridge_chnl_add_io_req ========
+ *      Enqueue an I/O request for data transfer on a channel to the DSP.
+ *      The direction (mode) is specified in the channel object. Note the DSP
+ *      address is specified for channels opened in direct I/O mode.
+ */
+int bridge_chnl_add_io_req(struct chnl_object *chnl_obj, void *host_buf,
+			       u32 byte_size, u32 buf_size,
+			       u32 dw_dsp_addr, u32 dw_arg)
+{
+	int status = 0;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+	struct chnl_irp *chnl_packet_obj = NULL;
+	struct bridge_dev_context *dev_ctxt;
+	struct dev_object *dev_obj;
+	u8 dw_state;
+	bool is_eos;
+	struct chnl_mgr *chnl_mgr_obj = pchnl->chnl_mgr_obj;
+	u8 *host_sys_buf = NULL;
+	bool sched_dpc = false;
+	u16 mb_val = 0;
+
+	is_eos = (byte_size == 0);
+
+	/* Validate args */
+	if (!host_buf || !pchnl) {
+		status = -EFAULT;
+	} else if (is_eos && CHNL_IS_INPUT(pchnl->chnl_mode)) {
+		status = -EPERM;
+	} else {
+		/*
+		 * Check the channel state: only queue chirp if channel state
+		 * allows it.
+		 */
+		dw_state = pchnl->dw_state;
+		if (dw_state != CHNL_STATEREADY) {
+			if (dw_state & CHNL_STATECANCEL)
+				status = -ECANCELED;
+			else if ((dw_state & CHNL_STATEEOS) &&
+				 CHNL_IS_OUTPUT(pchnl->chnl_mode))
+				status = -EPIPE;
+			else
+				/* No other possible states left */
+				DBC_ASSERT(0);
+		}
+	}
+
+	dev_obj = dev_get_first();
+	dev_get_bridge_context(dev_obj, &dev_ctxt);
+	if (!dev_ctxt)
+		status = -EFAULT;
+
+	if (status)
+		goto func_end;
+
+	if (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1 && host_buf) {
+		if (!(host_buf < (void *)USERMODE_ADDR)) {
+			host_sys_buf = host_buf;
+			goto func_cont;
+		}
+		/* if addr in user mode, then copy to kernel space */
+		host_sys_buf = kmalloc(buf_size, GFP_KERNEL);
+		if (host_sys_buf == NULL) {
+			status = -ENOMEM;
+			goto func_end;
+		}
+		if (CHNL_IS_OUTPUT(pchnl->chnl_mode)) {
+			status = copy_from_user(host_sys_buf, host_buf,
+						buf_size);
+			if (status) {
+				kfree(host_sys_buf);
+				host_sys_buf = NULL;
+				status = -EFAULT;
+				goto func_end;
+			}
+		}
+	}
+func_cont:
+	/* Mailbox IRQ is disabled to avoid race condition with DMA/ZCPY
+	 * channels. DPCCS is held to avoid race conditions with PCPY channels.
+	 * If DPC is scheduled in process context (iosm_schedule) and any
+	 * non-mailbox interrupt occurs, that DPC will run and break CS. Hence
+	 * we disable ALL DPCs. We will try to disable ONLY IO DPC later. */
+	spin_lock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+	omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
+	if (pchnl->chnl_type == CHNL_PCPY) {
+		/* This is a processor-copy channel. */
+		if (!status && CHNL_IS_OUTPUT(pchnl->chnl_mode)) {
+			/* Check buffer size on output channels for fit. */
+			if (byte_size >
+			    io_buf_size(pchnl->chnl_mgr_obj->hio_mgr))
+				status = -EINVAL;
+
+		}
+	}
+	if (!status) {
+		/* Get a free chirp: */
+		chnl_packet_obj =
+		    (struct chnl_irp *)lst_get_head(pchnl->free_packets_list);
+		if (chnl_packet_obj == NULL)
+			status = -EIO;
+
+	}
+	if (!status) {
+		/* Enqueue the chirp on the chnl's IORequest queue: */
+		chnl_packet_obj->host_user_buf = chnl_packet_obj->host_sys_buf =
+		    host_buf;
+		if (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1)
+			chnl_packet_obj->host_sys_buf = host_sys_buf;
+
+		/*
+		 * Note: for dma chans dw_dsp_addr contains dsp address
+		 * of SM buffer.
+		 */
+		DBC_ASSERT(chnl_mgr_obj->word_size != 0);
+		/* DSP address */
+		chnl_packet_obj->dsp_tx_addr =
+		    dw_dsp_addr / chnl_mgr_obj->word_size;
+		chnl_packet_obj->byte_size = byte_size;
+		chnl_packet_obj->buf_size = buf_size;
+		/* Only valid for output channel */
+		chnl_packet_obj->dw_arg = dw_arg;
+		chnl_packet_obj->status = (is_eos ? CHNL_IOCSTATEOS :
+					   CHNL_IOCSTATCOMPLETE);
+		lst_put_tail(pchnl->pio_requests,
+			     (struct list_head *)chnl_packet_obj);
+		pchnl->cio_reqs++;
+		DBC_ASSERT(pchnl->cio_reqs <= pchnl->chnl_packets);
+		/*
+		 * If end of stream, update the channel state to prevent
+		 * more IOR's.
+		 */
+		if (is_eos)
+			pchnl->dw_state |= CHNL_STATEEOS;
+
+		/* Legacy DSM Processor-Copy */
+		DBC_ASSERT(pchnl->chnl_type == CHNL_PCPY);
+		/* Request IO from the DSP */
+		io_request_chnl(chnl_mgr_obj->hio_mgr, pchnl,
+				(CHNL_IS_INPUT(pchnl->chnl_mode) ? IO_INPUT :
+				 IO_OUTPUT), &mb_val);
+		sched_dpc = true;
+
+	}
+	omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
+	spin_unlock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+	if (mb_val != 0)
+		sm_interrupt_dsp(dev_ctxt, mb_val);
+
+	/* Schedule a DPC, to do the actual data transfer */
+	if (sched_dpc)
+		iosm_schedule(chnl_mgr_obj->hio_mgr);
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_cancel_io ========
+ *      Return all I/O requests to the client which have not yet been
+ *      transferred.  The channel's I/O completion object is
+ *      signalled, and all the I/O requests are queued as IOC's, with the
+ *      status field set to CHNL_IOCSTATCANCEL.
+ *      This call is typically used in abort situations, and is a prelude to
+ *      chnl_close();
+ */
+int bridge_chnl_cancel_io(struct chnl_object *chnl_obj)
+{
+	int status = 0;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+	u32 chnl_id = -1;
+	s8 chnl_mode;
+	struct chnl_irp *chnl_packet_obj;
+	struct chnl_mgr *chnl_mgr_obj = NULL;
+
+	/* Check args: */
+	if (pchnl && pchnl->chnl_mgr_obj) {
+		chnl_id = pchnl->chnl_id;
+		chnl_mode = pchnl->chnl_mode;
+		chnl_mgr_obj = pchnl->chnl_mgr_obj;
+	} else {
+		status = -EFAULT;
+	}
+	if (status)
+		goto func_end;
+
+	/*  Mark this channel as cancelled, to prevent further IORequests or
+	 *  IORequests or dispatching. */
+	spin_lock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+	pchnl->dw_state |= CHNL_STATECANCEL;
+	if (LST_IS_EMPTY(pchnl->pio_requests))
+		goto func_cont;
+
+	if (pchnl->chnl_type == CHNL_PCPY) {
+		/* Indicate we have no more buffers available for transfer: */
+		if (CHNL_IS_INPUT(pchnl->chnl_mode)) {
+			io_cancel_chnl(chnl_mgr_obj->hio_mgr, chnl_id);
+		} else {
+			/* Record that we no longer have output buffers
+			 * available: */
+			chnl_mgr_obj->dw_output_mask &= ~(1 << chnl_id);
+		}
+	}
+	/* Move all IOR's to IOC queue: */
+	while (!LST_IS_EMPTY(pchnl->pio_requests)) {
+		chnl_packet_obj =
+		    (struct chnl_irp *)lst_get_head(pchnl->pio_requests);
+		if (chnl_packet_obj) {
+			chnl_packet_obj->byte_size = 0;
+			chnl_packet_obj->status |= CHNL_IOCSTATCANCEL;
+			lst_put_tail(pchnl->pio_completions,
+				     (struct list_head *)chnl_packet_obj);
+			pchnl->cio_cs++;
+			pchnl->cio_reqs--;
+			DBC_ASSERT(pchnl->cio_reqs >= 0);
+		}
+	}
+func_cont:
+	spin_unlock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_close ========
+ *  Purpose:
+ *      Ensures all pending I/O on this channel is cancelled, discards all
+ *      queued I/O completion notifications, then frees the resources allocated
+ *      for this channel, and makes the corresponding logical channel id
+ *      available for subsequent use.
+ */
+int bridge_chnl_close(struct chnl_object *chnl_obj)
+{
+	int status;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+
+	/* Check args: */
+	if (!pchnl) {
+		status = -EFAULT;
+		goto func_cont;
+	}
+	{
+		/* Cancel IO: this ensures no further IO requests or
+		 * notifications. */
+		status = bridge_chnl_cancel_io(chnl_obj);
+	}
+func_cont:
+	if (!status) {
+		/* Assert I/O on this channel is now cancelled: Protects
+		 * from io_dpc. */
+		DBC_ASSERT((pchnl->dw_state & CHNL_STATECANCEL));
+		/* Invalidate channel object: Protects from
+		 * CHNL_GetIOCompletion(). */
+		/* Free the slot in the channel manager: */
+		pchnl->chnl_mgr_obj->ap_channel[pchnl->chnl_id] = NULL;
+		spin_lock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
+		pchnl->chnl_mgr_obj->open_channels -= 1;
+		spin_unlock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
+		if (pchnl->ntfy_obj) {
+			ntfy_delete(pchnl->ntfy_obj);
+			kfree(pchnl->ntfy_obj);
+			pchnl->ntfy_obj = NULL;
+		}
+		/* Reset channel event: (NOTE: user_event freed in user
+		 * context.). */
+		if (pchnl->sync_event) {
+			sync_reset_event(pchnl->sync_event);
+			kfree(pchnl->sync_event);
+			pchnl->sync_event = NULL;
+		}
+		/* Free I/O request and I/O completion queues: */
+		if (pchnl->pio_completions) {
+			free_chirp_list(pchnl->pio_completions);
+			pchnl->pio_completions = NULL;
+			pchnl->cio_cs = 0;
+		}
+		if (pchnl->pio_requests) {
+			free_chirp_list(pchnl->pio_requests);
+			pchnl->pio_requests = NULL;
+			pchnl->cio_reqs = 0;
+		}
+		if (pchnl->free_packets_list) {
+			free_chirp_list(pchnl->free_packets_list);
+			pchnl->free_packets_list = NULL;
+		}
+		/* Release channel object. */
+		kfree(pchnl);
+		pchnl = NULL;
+	}
+	DBC_ENSURE(status || !pchnl);
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_create ========
+ *      Create a channel manager object, responsible for opening new channels
+ *      and closing old ones for a given board.
+ */
+int bridge_chnl_create(struct chnl_mgr **channel_mgr,
+			      struct dev_object *hdev_obj,
+			      const struct chnl_mgrattrs *mgr_attrts)
+{
+	int status = 0;
+	struct chnl_mgr *chnl_mgr_obj = NULL;
+	u8 max_channels;
+
+	/* Check DBC requirements: */
+	DBC_REQUIRE(channel_mgr != NULL);
+	DBC_REQUIRE(mgr_attrts != NULL);
+	DBC_REQUIRE(mgr_attrts->max_channels > 0);
+	DBC_REQUIRE(mgr_attrts->max_channels <= CHNL_MAXCHANNELS);
+	DBC_REQUIRE(mgr_attrts->word_size != 0);
+
+	/* Allocate channel manager object */
+	chnl_mgr_obj = kzalloc(sizeof(struct chnl_mgr), GFP_KERNEL);
+	if (chnl_mgr_obj) {
+		/*
+		 * The max_channels attr must equal the # of supported chnls for
+		 * each transport(# chnls for PCPY = DDMA = ZCPY): i.e.
+		 *      mgr_attrts->max_channels = CHNL_MAXCHANNELS =
+		 *                       DDMA_MAXDDMACHNLS = DDMA_MAXZCPYCHNLS.
+		 */
+		DBC_ASSERT(mgr_attrts->max_channels == CHNL_MAXCHANNELS);
+		max_channels = CHNL_MAXCHANNELS + CHNL_MAXCHANNELS * CHNL_PCPY;
+		/* Create array of channels */
+		chnl_mgr_obj->ap_channel = kzalloc(sizeof(struct chnl_object *)
+						* max_channels, GFP_KERNEL);
+		if (chnl_mgr_obj->ap_channel) {
+			/* Initialize chnl_mgr object */
+			chnl_mgr_obj->dw_type = CHNL_TYPESM;
+			chnl_mgr_obj->word_size = mgr_attrts->word_size;
+			/* Total # chnls supported */
+			chnl_mgr_obj->max_channels = max_channels;
+			chnl_mgr_obj->open_channels = 0;
+			chnl_mgr_obj->dw_output_mask = 0;
+			chnl_mgr_obj->dw_last_output = 0;
+			chnl_mgr_obj->hdev_obj = hdev_obj;
+			spin_lock_init(&chnl_mgr_obj->chnl_mgr_lock);
+		} else {
+			status = -ENOMEM;
+		}
+	} else {
+		status = -ENOMEM;
+	}
+
+	if (status) {
+		bridge_chnl_destroy(chnl_mgr_obj);
+		*channel_mgr = NULL;
+	} else {
+		/* Return channel manager object to caller... */
+		*channel_mgr = chnl_mgr_obj;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_destroy ========
+ *  Purpose:
+ *      Close all open channels, and destroy the channel manager.
+ */
+int bridge_chnl_destroy(struct chnl_mgr *hchnl_mgr)
+{
+	int status = 0;
+	struct chnl_mgr *chnl_mgr_obj = hchnl_mgr;
+	u32 chnl_id;
+
+	if (hchnl_mgr) {
+		/* Close all open channels: */
+		for (chnl_id = 0; chnl_id < chnl_mgr_obj->max_channels;
+		     chnl_id++) {
+			status =
+			    bridge_chnl_close(chnl_mgr_obj->ap_channel
+					      [chnl_id]);
+			if (status)
+				dev_dbg(bridge, "%s: Error status 0x%x\n",
+					__func__, status);
+		}
+
+		/* Free channel manager object: */
+		kfree(chnl_mgr_obj->ap_channel);
+
+		/* Set hchnl_mgr to NULL in device object. */
+		dev_set_chnl_mgr(chnl_mgr_obj->hdev_obj, NULL);
+		/* Free this Chnl Mgr object: */
+		kfree(hchnl_mgr);
+	} else {
+		status = -EFAULT;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_flush_io ========
+ *  purpose:
+ *      Flushes all the outstanding data requests on a channel.
+ */
+int bridge_chnl_flush_io(struct chnl_object *chnl_obj, u32 timeout)
+{
+	int status = 0;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+	s8 chnl_mode = -1;
+	struct chnl_mgr *chnl_mgr_obj;
+	struct chnl_ioc chnl_ioc_obj;
+	/* Check args: */
+	if (pchnl) {
+		if ((timeout == CHNL_IOCNOWAIT)
+		    && CHNL_IS_OUTPUT(pchnl->chnl_mode)) {
+			status = -EINVAL;
+		} else {
+			chnl_mode = pchnl->chnl_mode;
+			chnl_mgr_obj = pchnl->chnl_mgr_obj;
+		}
+	} else {
+		status = -EFAULT;
+	}
+	if (!status) {
+		/* Note: Currently, if another thread continues to add IO
+		 * requests to this channel, this function will continue to
+		 * flush all such queued IO requests. */
+		if (CHNL_IS_OUTPUT(chnl_mode)
+		    && (pchnl->chnl_type == CHNL_PCPY)) {
+			/* Wait for IO completions, up to the specified
+			 * timeout: */
+			while (!LST_IS_EMPTY(pchnl->pio_requests) && !status) {
+				status = bridge_chnl_get_ioc(chnl_obj,
+						timeout, &chnl_ioc_obj);
+				if (status)
+					continue;
+
+				if (chnl_ioc_obj.status & CHNL_IOCSTATTIMEOUT)
+					status = -ETIMEDOUT;
+
+			}
+		} else {
+			status = bridge_chnl_cancel_io(chnl_obj);
+			/* Now, leave the channel in the ready state: */
+			pchnl->dw_state &= ~CHNL_STATECANCEL;
+		}
+	}
+	DBC_ENSURE(status || LST_IS_EMPTY(pchnl->pio_requests));
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_get_info ========
+ *  Purpose:
+ *      Retrieve information related to a channel.
+ */
+int bridge_chnl_get_info(struct chnl_object *chnl_obj,
+			     struct chnl_info *channel_info)
+{
+	int status = 0;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+	if (channel_info != NULL) {
+		if (pchnl) {
+			/* Return the requested information: */
+			channel_info->hchnl_mgr = pchnl->chnl_mgr_obj;
+			channel_info->event_obj = pchnl->user_event;
+			channel_info->cnhl_id = pchnl->chnl_id;
+			channel_info->dw_mode = pchnl->chnl_mode;
+			channel_info->bytes_tx = pchnl->bytes_moved;
+			channel_info->process = pchnl->process;
+			channel_info->sync_event = pchnl->sync_event;
+			channel_info->cio_cs = pchnl->cio_cs;
+			channel_info->cio_reqs = pchnl->cio_reqs;
+			channel_info->dw_state = pchnl->dw_state;
+		} else {
+			status = -EFAULT;
+		}
+	} else {
+		status = -EFAULT;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_get_ioc ========
+ *      Optionally wait for I/O completion on a channel.  Dequeue an I/O
+ *      completion record, which contains information about the completed
+ *      I/O request.
+ *      Note: Ensures Channel Invariant (see notes above).
+ */
+int bridge_chnl_get_ioc(struct chnl_object *chnl_obj, u32 timeout,
+			    struct chnl_ioc *chan_ioc)
+{
+	int status = 0;
+	struct chnl_object *pchnl = (struct chnl_object *)chnl_obj;
+	struct chnl_irp *chnl_packet_obj;
+	int stat_sync;
+	bool dequeue_ioc = true;
+	struct chnl_ioc ioc = { NULL, 0, 0, 0, 0 };
+	u8 *host_sys_buf = NULL;
+	struct bridge_dev_context *dev_ctxt;
+	struct dev_object *dev_obj;
+
+	/* Check args: */
+	if (!chan_ioc || !pchnl) {
+		status = -EFAULT;
+	} else if (timeout == CHNL_IOCNOWAIT) {
+		if (LST_IS_EMPTY(pchnl->pio_completions))
+			status = -EREMOTEIO;
+
+	}
+
+	dev_obj = dev_get_first();
+	dev_get_bridge_context(dev_obj, &dev_ctxt);
+	if (!dev_ctxt)
+		status = -EFAULT;
+
+	if (status)
+		goto func_end;
+
+	ioc.status = CHNL_IOCSTATCOMPLETE;
+	if (timeout !=
+	    CHNL_IOCNOWAIT && LST_IS_EMPTY(pchnl->pio_completions)) {
+		if (timeout == CHNL_IOCINFINITE)
+			timeout = SYNC_INFINITE;
+
+		stat_sync = sync_wait_on_event(pchnl->sync_event, timeout);
+		if (stat_sync == -ETIME) {
+			/* No response from DSP */
+			ioc.status |= CHNL_IOCSTATTIMEOUT;
+			dequeue_ioc = false;
+		} else if (stat_sync == -EPERM) {
+			/* This can occur when the user mode thread is
+			 * aborted (^C), or when _VWIN32_WaitSingleObject()
+			 * fails due to unkown causes. */
+			/* Even though Wait failed, there may be something in
+			 * the Q: */
+			if (LST_IS_EMPTY(pchnl->pio_completions)) {
+				ioc.status |= CHNL_IOCSTATCANCEL;
+				dequeue_ioc = false;
+			}
+		}
+	}
+	/* See comment in AddIOReq */
+	spin_lock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
+	omap_mbox_disable_irq(dev_ctxt->mbox, IRQ_RX);
+	if (dequeue_ioc) {
+		/* Dequeue IOC and set chan_ioc; */
+		DBC_ASSERT(!LST_IS_EMPTY(pchnl->pio_completions));
+		chnl_packet_obj =
+		    (struct chnl_irp *)lst_get_head(pchnl->pio_completions);
+		/* Update chan_ioc from channel state and chirp: */
+		if (chnl_packet_obj) {
+			pchnl->cio_cs--;
+			/*  If this is a zero-copy channel, then set IOC's pbuf
+			 *  to the DSP's address. This DSP address will get
+			 *  translated to user's virtual addr later. */
+			{
+				host_sys_buf = chnl_packet_obj->host_sys_buf;
+				ioc.pbuf = chnl_packet_obj->host_user_buf;
+			}
+			ioc.byte_size = chnl_packet_obj->byte_size;
+			ioc.buf_size = chnl_packet_obj->buf_size;
+			ioc.dw_arg = chnl_packet_obj->dw_arg;
+			ioc.status |= chnl_packet_obj->status;
+			/* Place the used chirp on the free list: */
+			lst_put_tail(pchnl->free_packets_list,
+				     (struct list_head *)chnl_packet_obj);
+		} else {
+			ioc.pbuf = NULL;
+			ioc.byte_size = 0;
+		}
+	} else {
+		ioc.pbuf = NULL;
+		ioc.byte_size = 0;
+		ioc.dw_arg = 0;
+		ioc.buf_size = 0;
+	}
+	/* Ensure invariant: If any IOC's are queued for this channel... */
+	if (!LST_IS_EMPTY(pchnl->pio_completions)) {
+		/*  Since DSPStream_Reclaim() does not take a timeout
+		 *  parameter, we pass the stream's timeout value to
+		 *  bridge_chnl_get_ioc. We cannot determine whether or not
+		 *  we have waited in User mode. Since the stream's timeout
+		 *  value may be non-zero, we still have to set the event.
+		 *  Therefore, this optimization is taken out.
+		 *
+		 *  if (timeout == CHNL_IOCNOWAIT) {
+		 *    ... ensure event is set..
+		 *      sync_set_event(pchnl->sync_event);
+		 *  } */
+		sync_set_event(pchnl->sync_event);
+	} else {
+		/* else, if list is empty, ensure event is reset. */
+		sync_reset_event(pchnl->sync_event);
+	}
+	omap_mbox_enable_irq(dev_ctxt->mbox, IRQ_RX);
+	spin_unlock_bh(&pchnl->chnl_mgr_obj->chnl_mgr_lock);
+	if (dequeue_ioc
+	    && (pchnl->chnl_type == CHNL_PCPY && pchnl->chnl_id > 1)) {
+		if (!(ioc.pbuf < (void *)USERMODE_ADDR))
+			goto func_cont;
+
+		/* If the addr is in user mode, then copy it */
+		if (!host_sys_buf || !ioc.pbuf) {
+			status = -EFAULT;
+			goto func_cont;
+		}
+		if (!CHNL_IS_INPUT(pchnl->chnl_mode))
+			goto func_cont1;
+
+		/*host_user_buf */
+		status = copy_to_user(ioc.pbuf, host_sys_buf, ioc.byte_size);
+		if (status) {
+			if (current->flags & PF_EXITING)
+				status = 0;
+		}
+		if (status)
+			status = -EFAULT;
+func_cont1:
+		kfree(host_sys_buf);
+	}
+func_cont:
+	/* Update User's IOC block: */
+	*chan_ioc = ioc;
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_get_mgr_info ========
+ *      Retrieve information related to the channel manager.
+ */
+int bridge_chnl_get_mgr_info(struct chnl_mgr *hchnl_mgr, u32 ch_id,
+				 struct chnl_mgrinfo *mgr_info)
+{
+	int status = 0;
+	struct chnl_mgr *chnl_mgr_obj = (struct chnl_mgr *)hchnl_mgr;
+
+	if (mgr_info != NULL) {
+		if (ch_id <= CHNL_MAXCHANNELS) {
+			if (hchnl_mgr) {
+				/* Return the requested information: */
+				mgr_info->chnl_obj =
+				    chnl_mgr_obj->ap_channel[ch_id];
+				mgr_info->open_channels =
+				    chnl_mgr_obj->open_channels;
+				mgr_info->dw_type = chnl_mgr_obj->dw_type;
+				/* total # of chnls */
+				mgr_info->max_channels =
+				    chnl_mgr_obj->max_channels;
+			} else {
+				status = -EFAULT;
+			}
+		} else {
+			status = -ECHRNG;
+		}
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_idle ========
+ *      Idles a particular channel.
+ */
+int bridge_chnl_idle(struct chnl_object *chnl_obj, u32 timeout,
+			    bool flush_data)
+{
+	s8 chnl_mode;
+	struct chnl_mgr *chnl_mgr_obj;
+	int status = 0;
+
+	DBC_REQUIRE(chnl_obj);
+
+	chnl_mode = chnl_obj->chnl_mode;
+	chnl_mgr_obj = chnl_obj->chnl_mgr_obj;
+
+	if (CHNL_IS_OUTPUT(chnl_mode) && !flush_data) {
+		/* Wait for IO completions, up to the specified timeout: */
+		status = bridge_chnl_flush_io(chnl_obj, timeout);
+	} else {
+		status = bridge_chnl_cancel_io(chnl_obj);
+
+		/* Reset the byte count and put channel back in ready state. */
+		chnl_obj->bytes_moved = 0;
+		chnl_obj->dw_state &= ~CHNL_STATECANCEL;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_open ========
+ *      Open a new half-duplex channel to the DSP board.
+ */
+int bridge_chnl_open(struct chnl_object **chnl,
+			    struct chnl_mgr *hchnl_mgr, s8 chnl_mode,
+			    u32 ch_id, const struct chnl_attr *pattrs)
+{
+	int status = 0;
+	struct chnl_mgr *chnl_mgr_obj = hchnl_mgr;
+	struct chnl_object *pchnl = NULL;
+	struct sync_object *sync_event = NULL;
+	/* Ensure DBC requirements: */
+	DBC_REQUIRE(chnl != NULL);
+	DBC_REQUIRE(pattrs != NULL);
+	DBC_REQUIRE(hchnl_mgr != NULL);
+	*chnl = NULL;
+	/* Validate Args: */
+	if (pattrs->uio_reqs == 0) {
+		status = -EINVAL;
+	} else {
+		if (!hchnl_mgr) {
+			status = -EFAULT;
+		} else {
+			if (ch_id != CHNL_PICKFREE) {
+				if (ch_id >= chnl_mgr_obj->max_channels)
+					status = -ECHRNG;
+				else if (chnl_mgr_obj->ap_channel[ch_id] !=
+					 NULL)
+					status = -EALREADY;
+			} else {
+				/* Check for free channel */
+				status =
+				    search_free_channel(chnl_mgr_obj, &ch_id);
+			}
+		}
+	}
+	if (status)
+		goto func_end;
+
+	DBC_ASSERT(ch_id < chnl_mgr_obj->max_channels);
+	/* Create channel object: */
+	pchnl = kzalloc(sizeof(struct chnl_object), GFP_KERNEL);
+	if (!pchnl) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	/* Protect queues from io_dpc: */
+	pchnl->dw_state = CHNL_STATECANCEL;
+	/* Allocate initial IOR and IOC queues: */
+	pchnl->free_packets_list = create_chirp_list(pattrs->uio_reqs);
+	pchnl->pio_requests = create_chirp_list(0);
+	pchnl->pio_completions = create_chirp_list(0);
+	pchnl->chnl_packets = pattrs->uio_reqs;
+	pchnl->cio_cs = 0;
+	pchnl->cio_reqs = 0;
+	sync_event = kzalloc(sizeof(struct sync_object), GFP_KERNEL);
+	if (sync_event)
+		sync_init_event(sync_event);
+	else
+		status = -ENOMEM;
+
+	if (!status) {
+		pchnl->ntfy_obj = kmalloc(sizeof(struct ntfy_object),
+							GFP_KERNEL);
+		if (pchnl->ntfy_obj)
+			ntfy_init(pchnl->ntfy_obj);
+		else
+			status = -ENOMEM;
+	}
+
+	if (!status) {
+		if (pchnl->pio_completions && pchnl->pio_requests &&
+		    pchnl->free_packets_list) {
+			/* Initialize CHNL object fields: */
+			pchnl->chnl_mgr_obj = chnl_mgr_obj;
+			pchnl->chnl_id = ch_id;
+			pchnl->chnl_mode = chnl_mode;
+			pchnl->user_event = sync_event;
+			pchnl->sync_event = sync_event;
+			/* Get the process handle */
+			pchnl->process = current->tgid;
+			pchnl->pcb_arg = 0;
+			pchnl->bytes_moved = 0;
+			/* Default to proc-copy */
+			pchnl->chnl_type = CHNL_PCPY;
+		} else {
+			status = -ENOMEM;
+		}
+	}
+
+	if (status) {
+		/* Free memory */
+		if (pchnl->pio_completions) {
+			free_chirp_list(pchnl->pio_completions);
+			pchnl->pio_completions = NULL;
+			pchnl->cio_cs = 0;
+		}
+		if (pchnl->pio_requests) {
+			free_chirp_list(pchnl->pio_requests);
+			pchnl->pio_requests = NULL;
+		}
+		if (pchnl->free_packets_list) {
+			free_chirp_list(pchnl->free_packets_list);
+			pchnl->free_packets_list = NULL;
+		}
+		kfree(sync_event);
+		sync_event = NULL;
+
+		if (pchnl->ntfy_obj) {
+			ntfy_delete(pchnl->ntfy_obj);
+			kfree(pchnl->ntfy_obj);
+			pchnl->ntfy_obj = NULL;
+		}
+		kfree(pchnl);
+	} else {
+		/* Insert channel object in channel manager: */
+		chnl_mgr_obj->ap_channel[pchnl->chnl_id] = pchnl;
+		spin_lock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+		chnl_mgr_obj->open_channels++;
+		spin_unlock_bh(&chnl_mgr_obj->chnl_mgr_lock);
+		/* Return result... */
+		pchnl->dw_state = CHNL_STATEREADY;
+		*chnl = pchnl;
+	}
+func_end:
+	DBC_ENSURE((!status && pchnl) || (*chnl == NULL));
+	return status;
+}
+
+/*
+ *  ======== bridge_chnl_register_notify ========
+ *      Registers for events on a particular channel.
+ */
+int bridge_chnl_register_notify(struct chnl_object *chnl_obj,
+				    u32 event_mask, u32 notify_type,
+				    struct dsp_notification *hnotification)
+{
+	int status = 0;
+
+	DBC_ASSERT(!(event_mask & ~(DSP_STREAMDONE | DSP_STREAMIOCOMPLETION)));
+
+	if (event_mask)
+		status = ntfy_register(chnl_obj->ntfy_obj, hnotification,
+						event_mask, notify_type);
+	else
+		status = ntfy_unregister(chnl_obj->ntfy_obj, hnotification);
+
+	return status;
+}
+
+/*
+ *  ======== create_chirp_list ========
+ *  Purpose:
+ *      Initialize a queue of channel I/O Request/Completion packets.
+ *  Parameters:
+ *      chirps:     Number of Chirps to allocate.
+ *  Returns:
+ *      Pointer to queue of IRPs, or NULL.
+ *  Requires:
+ *  Ensures:
+ */
+static struct lst_list *create_chirp_list(u32 chirps)
+{
+	struct lst_list *chirp_list;
+	struct chnl_irp *chnl_packet_obj;
+	u32 i;
+
+	chirp_list = kzalloc(sizeof(struct lst_list), GFP_KERNEL);
+
+	if (chirp_list) {
+		INIT_LIST_HEAD(&chirp_list->head);
+		/* Make N chirps and place on queue. */
+		for (i = 0; (i < chirps)
+		     && ((chnl_packet_obj = make_new_chirp()) != NULL); i++) {
+			lst_put_tail(chirp_list,
+				     (struct list_head *)chnl_packet_obj);
+		}
+
+		/* If we couldn't allocate all chirps, free those allocated: */
+		if (i != chirps) {
+			free_chirp_list(chirp_list);
+			chirp_list = NULL;
+		}
+	}
+
+	return chirp_list;
+}
+
+/*
+ *  ======== free_chirp_list ========
+ *  Purpose:
+ *      Free the queue of Chirps.
+ */
+static void free_chirp_list(struct lst_list *chirp_list)
+{
+	DBC_REQUIRE(chirp_list != NULL);
+
+	while (!LST_IS_EMPTY(chirp_list))
+		kfree(lst_get_head(chirp_list));
+
+	kfree(chirp_list);
+}
+
+/*
+ *  ======== make_new_chirp ========
+ *      Allocate the memory for a new channel IRP.
+ */
+static struct chnl_irp *make_new_chirp(void)
+{
+	struct chnl_irp *chnl_packet_obj;
+
+	chnl_packet_obj = kzalloc(sizeof(struct chnl_irp), GFP_KERNEL);
+	if (chnl_packet_obj != NULL) {
+		/* lst_init_elem only resets the list's member values. */
+		lst_init_elem(&chnl_packet_obj->link);
+	}
+
+	return chnl_packet_obj;
+}
+
+/*
+ *  ======== search_free_channel ========
+ *      Search for a free channel slot in the array of channel pointers.
+ */
+static int search_free_channel(struct chnl_mgr *chnl_mgr_obj,
+				      u32 *chnl)
+{
+	int status = -ENOSR;
+	u32 i;
+
+	DBC_REQUIRE(chnl_mgr_obj);
+
+	for (i = 0; i < chnl_mgr_obj->max_channels; i++) {
+		if (chnl_mgr_obj->ap_channel[i] == NULL) {
+			status = 0;
+			*chnl = i;
+			break;
+		}
+	}
+
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
new file mode 100644
index 00000000000..5b1a0c5bb14
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -0,0 +1,422 @@
+/*
+ * clk.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Clock and Timer services.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+#include <plat/dmtimer.h>
+#include <plat/mcbsp.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/cfg.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/dev.h>
+#include "_tiomap.h"
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/clk.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+
+#define OMAP_SSI_OFFSET			0x58000
+#define OMAP_SSI_SIZE			0x1000
+#define OMAP_SSI_SYSCONFIG_OFFSET	0x10
+
+#define SSI_AUTOIDLE			(1 << 0)
+#define SSI_SIDLE_SMARTIDLE		(2 << 3)
+#define SSI_MIDLE_NOIDLE		(1 << 12)
+
+/* Clk types requested by the dsp */
+#define IVA2_CLK	0
+#define GPT_CLK		1
+#define WDT_CLK		2
+#define MCBSP_CLK	3
+#define SSI_CLK		4
+
+/* Bridge GPT id (1 - 4), DM Timer id (5 - 8) */
+#define DMT_ID(id) ((id) + 4)
+
+/* Bridge MCBSP id (6 - 10), OMAP Mcbsp id (0 - 4) */
+#define MCBSP_ID(id) ((id) - 6)
+
+static struct omap_dm_timer *timer[4];
+
+struct clk *iva2_clk;
+
+struct dsp_ssi {
+	struct clk *sst_fck;
+	struct clk *ssr_fck;
+	struct clk *ick;
+};
+
+static struct dsp_ssi ssi;
+
+static u32 dsp_clocks;
+
+static inline u32 is_dsp_clk_active(u32 clk, u8 id)
+{
+	return clk & (1 << id);
+}
+
+static inline void set_dsp_clk_active(u32 *clk, u8 id)
+{
+	*clk |= (1 << id);
+}
+
+static inline void set_dsp_clk_inactive(u32 *clk, u8 id)
+{
+	*clk &= ~(1 << id);
+}
+
+static s8 get_clk_type(u8 id)
+{
+	s8 type;
+
+	if (id == DSP_CLK_IVA2)
+		type = IVA2_CLK;
+	else if (id <= DSP_CLK_GPT8)
+		type = GPT_CLK;
+	else if (id == DSP_CLK_WDT3)
+		type = WDT_CLK;
+	else if (id <= DSP_CLK_MCBSP5)
+		type = MCBSP_CLK;
+	else if (id == DSP_CLK_SSI)
+		type = SSI_CLK;
+	else
+		type = -1;
+
+	return type;
+}
+
+/*
+ *  ======== dsp_clk_exit ========
+ *  Purpose:
+ *      Cleanup CLK module.
+ */
+void dsp_clk_exit(void)
+{
+	dsp_clock_disable_all(dsp_clocks);
+
+	clk_put(iva2_clk);
+	clk_put(ssi.sst_fck);
+	clk_put(ssi.ssr_fck);
+	clk_put(ssi.ick);
+}
+
+/*
+ *  ======== dsp_clk_init ========
+ *  Purpose:
+ *      Initialize CLK module.
+ */
+void dsp_clk_init(void)
+{
+	static struct platform_device dspbridge_device;
+
+	dspbridge_device.dev.bus = &platform_bus_type;
+
+	iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck");
+	if (IS_ERR(iva2_clk))
+		dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk);
+
+	ssi.sst_fck = clk_get(&dspbridge_device.dev, "ssi_sst_fck");
+	ssi.ssr_fck = clk_get(&dspbridge_device.dev, "ssi_ssr_fck");
+	ssi.ick = clk_get(&dspbridge_device.dev, "ssi_ick");
+
+	if (IS_ERR(ssi.sst_fck) || IS_ERR(ssi.ssr_fck) || IS_ERR(ssi.ick))
+		dev_err(bridge, "failed to get ssi: sst %p, ssr %p, ick %p\n",
+					ssi.sst_fck, ssi.ssr_fck, ssi.ick);
+}
+
+#ifdef CONFIG_OMAP_MCBSP
+static void mcbsp_clk_prepare(bool flag, u8 id)
+{
+	struct cfg_hostres *resources;
+	struct dev_object *hdev_object = NULL;
+	struct bridge_dev_context *bridge_context = NULL;
+	u32 val;
+
+	hdev_object = (struct dev_object *)drv_get_first_dev_object();
+	if (!hdev_object)
+		return;
+
+	dev_get_bridge_context(hdev_object, &bridge_context);
+	if (!bridge_context)
+		return;
+
+	resources = bridge_context->resources;
+	if (!resources)
+		return;
+
+	if (flag) {
+		if (id == DSP_CLK_MCBSP1) {
+			/* set MCBSP1_CLKS, on McBSP1 ON */
+			val = __raw_readl(resources->dw_sys_ctrl_base + 0x274);
+			val |= 1 << 2;
+			__raw_writel(val, resources->dw_sys_ctrl_base + 0x274);
+		} else if (id == DSP_CLK_MCBSP2) {
+			/* set MCBSP2_CLKS, on McBSP2 ON */
+			val = __raw_readl(resources->dw_sys_ctrl_base + 0x274);
+			val |= 1 << 6;
+			__raw_writel(val, resources->dw_sys_ctrl_base + 0x274);
+		}
+	} else {
+		if (id == DSP_CLK_MCBSP1) {
+			/* clear MCBSP1_CLKS, on McBSP1 OFF */
+			val = __raw_readl(resources->dw_sys_ctrl_base + 0x274);
+			val &= ~(1 << 2);
+			__raw_writel(val, resources->dw_sys_ctrl_base + 0x274);
+		} else if (id == DSP_CLK_MCBSP2) {
+			/* clear MCBSP2_CLKS, on McBSP2 OFF */
+			val = __raw_readl(resources->dw_sys_ctrl_base + 0x274);
+			val &= ~(1 << 6);
+			__raw_writel(val, resources->dw_sys_ctrl_base + 0x274);
+		}
+	}
+}
+#endif
+
+/**
+ * dsp_gpt_wait_overflow - set gpt overflow and wait for fixed timeout
+ * @clk_id:      GP Timer clock id.
+ * @load:        Overflow value.
+ *
+ * Sets an overflow interrupt for the desired GPT waiting for a timeout
+ * of 5 msecs for the interrupt to occur.
+ */
+void dsp_gpt_wait_overflow(short int clk_id, unsigned int load)
+{
+	struct omap_dm_timer *gpt = timer[clk_id - 1];
+	unsigned long timeout;
+
+	if (!gpt)
+		return;
+
+	/* Enable overflow interrupt */
+	omap_dm_timer_set_int_enable(gpt, OMAP_TIMER_INT_OVERFLOW);
+
+	/*
+	 * Set counter value to overflow counter after
+	 * one tick and start timer.
+	 */
+	omap_dm_timer_set_load_start(gpt, 0, load);
+
+	/* Wait 80us for timer to overflow */
+	udelay(80);
+
+	timeout = msecs_to_jiffies(5);
+	/* Check interrupt status and wait for interrupt */
+	while (!(omap_dm_timer_read_status(gpt) & OMAP_TIMER_INT_OVERFLOW)) {
+		if (time_is_after_jiffies(timeout)) {
+			pr_err("%s: GPTimer interrupt failed\n", __func__);
+			break;
+		}
+	}
+}
+
+/*
+ *  ======== dsp_clk_enable ========
+ *  Purpose:
+ *      Enable Clock .
+ *
+ */
+int dsp_clk_enable(enum dsp_clk_id clk_id)
+{
+	int status = 0;
+
+	if (is_dsp_clk_active(dsp_clocks, clk_id)) {
+		dev_err(bridge, "WARN: clock id %d already enabled\n", clk_id);
+		goto out;
+	}
+
+	switch (get_clk_type(clk_id)) {
+	case IVA2_CLK:
+		clk_enable(iva2_clk);
+		break;
+	case GPT_CLK:
+		timer[clk_id - 1] =
+				omap_dm_timer_request_specific(DMT_ID(clk_id));
+		break;
+#ifdef CONFIG_OMAP_MCBSP
+	case MCBSP_CLK:
+		mcbsp_clk_prepare(true, clk_id);
+		omap_mcbsp_set_io_type(MCBSP_ID(clk_id), OMAP_MCBSP_POLL_IO);
+		omap_mcbsp_request(MCBSP_ID(clk_id));
+		break;
+#endif
+	case WDT_CLK:
+		dev_err(bridge, "ERROR: DSP requested to enable WDT3 clk\n");
+		break;
+	case SSI_CLK:
+		clk_enable(ssi.sst_fck);
+		clk_enable(ssi.ssr_fck);
+		clk_enable(ssi.ick);
+
+		/*
+		 * The SSI module need to configured not to have the Forced
+		 * idle for master interface. If it is set to forced idle,
+		 * the SSI module is transitioning to standby thereby causing
+		 * the client in the DSP hang waiting for the SSI module to
+		 * be active after enabling the clocks
+		 */
+		ssi_clk_prepare(true);
+		break;
+	default:
+		dev_err(bridge, "Invalid clock id for enable\n");
+		status = -EPERM;
+	}
+
+	if (!status)
+		set_dsp_clk_active(&dsp_clocks, clk_id);
+
+out:
+	return status;
+}
+
+/**
+ * dsp_clock_enable_all - Enable clocks used by the DSP
+ * @dev_context		Driver's device context strucure
+ *
+ * This function enables all the peripheral clocks that were requested by DSP.
+ */
+u32 dsp_clock_enable_all(u32 dsp_per_clocks)
+{
+	u32 clk_id;
+	u32 status = -EPERM;
+
+	for (clk_id = 0; clk_id < DSP_CLK_NOT_DEFINED; clk_id++) {
+		if (is_dsp_clk_active(dsp_per_clocks, clk_id))
+			status = dsp_clk_enable(clk_id);
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dsp_clk_disable ========
+ *  Purpose:
+ *      Disable the clock.
+ *
+ */
+int dsp_clk_disable(enum dsp_clk_id clk_id)
+{
+	int status = 0;
+
+	if (!is_dsp_clk_active(dsp_clocks, clk_id)) {
+		dev_err(bridge, "ERR: clock id %d already disabled\n", clk_id);
+		goto out;
+	}
+
+	switch (get_clk_type(clk_id)) {
+	case IVA2_CLK:
+		clk_disable(iva2_clk);
+		break;
+	case GPT_CLK:
+		omap_dm_timer_free(timer[clk_id - 1]);
+		break;
+#ifdef CONFIG_OMAP_MCBSP
+	case MCBSP_CLK:
+		mcbsp_clk_prepare(false, clk_id);
+		omap_mcbsp_free(MCBSP_ID(clk_id));
+		break;
+#endif
+	case WDT_CLK:
+		dev_err(bridge, "ERROR: DSP requested to disable WDT3 clk\n");
+		break;
+	case SSI_CLK:
+		ssi_clk_prepare(false);
+		ssi_clk_prepare(false);
+		clk_disable(ssi.sst_fck);
+		clk_disable(ssi.ssr_fck);
+		clk_disable(ssi.ick);
+		break;
+	default:
+		dev_err(bridge, "Invalid clock id for disable\n");
+		status = -EPERM;
+	}
+
+	if (!status)
+		set_dsp_clk_inactive(&dsp_clocks, clk_id);
+
+out:
+	return status;
+}
+
+/**
+ * dsp_clock_disable_all - Disable all active clocks
+ * @dev_context		Driver's device context structure
+ *
+ * This function disables all the peripheral clocks that were enabled by DSP.
+ * It is meant to be called only when DSP is entering hibernation or when DSP
+ * is in error state.
+ */
+u32 dsp_clock_disable_all(u32 dsp_per_clocks)
+{
+	u32 clk_id;
+	u32 status = -EPERM;
+
+	for (clk_id = 0; clk_id < DSP_CLK_NOT_DEFINED; clk_id++) {
+		if (is_dsp_clk_active(dsp_per_clocks, clk_id))
+			status = dsp_clk_disable(clk_id);
+	}
+
+	return status;
+}
+
+u32 dsp_clk_get_iva2_rate(void)
+{
+	u32 clk_speed_khz;
+
+	clk_speed_khz = clk_get_rate(iva2_clk);
+	clk_speed_khz /= 1000;
+	dev_dbg(bridge, "%s: clk speed Khz = %d\n", __func__, clk_speed_khz);
+
+	return clk_speed_khz;
+}
+
+void ssi_clk_prepare(bool FLAG)
+{
+	void __iomem *ssi_base;
+	unsigned int value;
+
+	ssi_base = ioremap(L4_34XX_BASE + OMAP_SSI_OFFSET, OMAP_SSI_SIZE);
+	if (!ssi_base) {
+		pr_err("%s: error, SSI not configured\n", __func__);
+		return;
+	}
+
+	if (FLAG) {
+		/* Set Autoidle, SIDLEMode to smart idle, and MIDLEmode to
+		 * no idle
+		 */
+		value = SSI_AUTOIDLE | SSI_SIDLE_SMARTIDLE | SSI_MIDLE_NOIDLE;
+	} else {
+		/* Set Autoidle, SIDLEMode to forced idle, and MIDLEmode to
+		 * forced idle
+		 */
+		value = SSI_AUTOIDLE;
+	}
+
+	__raw_writel(value, ssi_base + OMAP_SSI_SYSCONFIG_OFFSET);
+	iounmap(ssi_base);
+}
+
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
new file mode 100644
index 00000000000..02c660dbcf6
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -0,0 +1,2333 @@
+/*
+ * io_sm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * IO dispatcher for a shared memory channel driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ * Channel Invariant:
+ * There is an important invariant condition which must be maintained per
+ * channel outside of bridge_chnl_get_ioc() and IO_Dispatch(), violation of
+ * which may cause timeouts and/or failure of the sync_wait_on_event
+ * function.
+ */
+#include <linux/types.h>
+
+/* Host OS */
+#include <dspbridge/host_os.h>
+#include <linux/workqueue.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/* Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/* Services Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/ntfy.h>
+#include <dspbridge/sync.h>
+
+/* Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
+/* Bridge Driver */
+#include <dspbridge/dspdeh.h>
+#include <dspbridge/dspio.h>
+#include <dspbridge/dspioctl.h>
+#include <dspbridge/wdt.h>
+#include <_tiomap.h>
+#include <tiomap_io.h>
+#include <_tiomap_pwr.h>
+
+/* Platform Manager */
+#include <dspbridge/cod.h>
+#include <dspbridge/node.h>
+#include <dspbridge/dev.h>
+
+/* Others */
+#include <dspbridge/rms_sh.h>
+#include <dspbridge/mgr.h>
+#include <dspbridge/drv.h>
+#include "_cmm.h"
+#include "module_list.h"
+
+/* This */
+#include <dspbridge/io_sm.h>
+#include "_msg_sm.h"
+
+/* Defines, Data Structures, Typedefs */
+#define OUTPUTNOTREADY  0xffff
+#define NOTENABLED      0xffff	/* Channel(s) not enabled */
+
+#define EXTEND      "_EXT_END"
+
+#define SWAP_WORD(x)     (x)
+#define UL_PAGE_ALIGN_SIZE 0x10000	/* Page Align Size */
+
+#define MAX_PM_REQS 32
+
+#define MMU_FAULT_HEAD1 0xa5a5a5a5
+#define MMU_FAULT_HEAD2 0x96969696
+#define POLL_MAX 1000
+#define MAX_MMU_DBGBUFF 10240
+
+/* IO Manager: only one created per board */
+struct io_mgr {
+	/* These four fields must be the first fields in a io_mgr_ struct */
+	/* Bridge device context */
+	struct bridge_dev_context *hbridge_context;
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+	struct dev_object *hdev_obj;	/* Device this board represents */
+
+	/* These fields initialized in bridge_io_create() */
+	struct chnl_mgr *hchnl_mgr;
+	struct shm *shared_mem;	/* Shared Memory control */
+	u8 *input;		/* Address of input channel */
+	u8 *output;		/* Address of output channel */
+	struct msg_mgr *hmsg_mgr;	/* Message manager */
+	/* Msg control for from DSP messages */
+	struct msg_ctrl *msg_input_ctrl;
+	/* Msg control for to DSP messages */
+	struct msg_ctrl *msg_output_ctrl;
+	u8 *msg_input;		/* Address of input messages */
+	u8 *msg_output;		/* Address of output messages */
+	u32 usm_buf_size;	/* Size of a shared memory I/O channel */
+	bool shared_irq;	/* Is this IRQ shared? */
+	u32 word_size;		/* Size in bytes of DSP word */
+	u16 intr_val;		/* Interrupt value */
+	/* Private extnd proc info; mmu setup */
+	struct mgr_processorextinfo ext_proc_info;
+	struct cmm_object *hcmm_mgr;	/* Shared Mem Mngr */
+	struct work_struct io_workq;	/* workqueue */
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+	u32 ul_trace_buffer_begin;	/* Trace message start address */
+	u32 ul_trace_buffer_end;	/* Trace message end address */
+	u32 ul_trace_buffer_current;	/* Trace message current address */
+	u32 ul_gpp_read_pointer;	/* GPP Read pointer to Trace buffer */
+	u8 *pmsg;
+	u32 ul_gpp_va;
+	u32 ul_dsp_va;
+#endif
+	/* IO Dpc */
+	u32 dpc_req;		/* Number of requested DPC's. */
+	u32 dpc_sched;		/* Number of executed DPC's. */
+	struct tasklet_struct dpc_tasklet;
+	spinlock_t dpc_lock;
+
+};
+
+/* Function Prototypes */
+static void io_dispatch_pm(struct io_mgr *pio_mgr);
+static void notify_chnl_complete(struct chnl_object *pchnl,
+				 struct chnl_irp *chnl_packet_obj);
+static void input_chnl(struct io_mgr *pio_mgr, struct chnl_object *pchnl,
+			u8 io_mode);
+static void output_chnl(struct io_mgr *pio_mgr, struct chnl_object *pchnl,
+			u8 io_mode);
+static void input_msg(struct io_mgr *pio_mgr, struct msg_mgr *hmsg_mgr);
+static void output_msg(struct io_mgr *pio_mgr, struct msg_mgr *hmsg_mgr);
+static u32 find_ready_output(struct chnl_mgr *chnl_mgr_obj,
+			     struct chnl_object *pchnl, u32 mask);
+
+/* Bus Addr (cached kernel) */
+static int register_shm_segs(struct io_mgr *hio_mgr,
+				    struct cod_manager *cod_man,
+				    u32 dw_gpp_base_pa);
+
+static inline void set_chnl_free(struct shm *sm, u32 chnl)
+{
+	sm->host_free_mask &= ~(1 << chnl);
+}
+
+static inline void set_chnl_busy(struct shm *sm, u32 chnl)
+{
+	sm->host_free_mask |= 1 << chnl;
+}
+
+
+/*
+ *  ======== bridge_io_create ========
+ *      Create an IO manager object.
+ */
+int bridge_io_create(struct io_mgr **io_man,
+			    struct dev_object *hdev_obj,
+			    const struct io_attrs *mgr_attrts)
+{
+	int status = 0;
+	struct io_mgr *pio_mgr = NULL;
+	struct shm *shared_mem = NULL;
+	struct bridge_dev_context *hbridge_context = NULL;
+	struct cfg_devnode *dev_node_obj;
+	struct chnl_mgr *hchnl_mgr;
+	u8 dev_type;
+
+	/* Check requirements */
+	if (!io_man || !mgr_attrts || mgr_attrts->word_size == 0) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	dev_get_chnl_mgr(hdev_obj, &hchnl_mgr);
+	if (!hchnl_mgr || hchnl_mgr->hio_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/*
+	 * Message manager will be created when a file is loaded, since
+	 * size of message buffer in shared memory is configurable in
+	 * the base image.
+	 */
+	dev_get_bridge_context(hdev_obj, &hbridge_context);
+	if (!hbridge_context) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	dev_get_dev_type(hdev_obj, &dev_type);
+	/*
+	 * DSP shared memory area will get set properly when
+	 * a program is loaded. They are unknown until a COFF file is
+	 * loaded. I chose the value -1 because it was less likely to be
+	 * a valid address than 0.
+	 */
+	shared_mem = (struct shm *)-1;
+
+	/* Allocate IO manager object */
+	pio_mgr = kzalloc(sizeof(struct io_mgr), GFP_KERNEL);
+	if (pio_mgr == NULL) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	/* Initialize chnl_mgr object */
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+	pio_mgr->pmsg = NULL;
+#endif
+	pio_mgr->hchnl_mgr = hchnl_mgr;
+	pio_mgr->word_size = mgr_attrts->word_size;
+	pio_mgr->shared_mem = shared_mem;
+
+	if (dev_type == DSP_UNIT) {
+		/* Create an IO DPC */
+		tasklet_init(&pio_mgr->dpc_tasklet, io_dpc, (u32) pio_mgr);
+
+		/* Initialize DPC counters */
+		pio_mgr->dpc_req = 0;
+		pio_mgr->dpc_sched = 0;
+
+		spin_lock_init(&pio_mgr->dpc_lock);
+
+		status = dev_get_dev_node(hdev_obj, &dev_node_obj);
+	}
+
+	if (!status) {
+		pio_mgr->hbridge_context = hbridge_context;
+		pio_mgr->shared_irq = mgr_attrts->irq_shared;
+		if (dsp_wdt_init())
+			status = -EPERM;
+	} else {
+		status = -EIO;
+	}
+func_end:
+	if (status) {
+		/* Cleanup */
+		bridge_io_destroy(pio_mgr);
+		if (io_man)
+			*io_man = NULL;
+	} else {
+		/* Return IO manager object to caller... */
+		hchnl_mgr->hio_mgr = pio_mgr;
+		*io_man = pio_mgr;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_io_destroy ========
+ *  Purpose:
+ *      Disable interrupts, destroy the IO manager.
+ */
+int bridge_io_destroy(struct io_mgr *hio_mgr)
+{
+	int status = 0;
+	if (hio_mgr) {
+		/* Free IO DPC object */
+		tasklet_kill(&hio_mgr->dpc_tasklet);
+
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+		kfree(hio_mgr->pmsg);
+#endif
+		dsp_wdt_exit();
+		/* Free this IO manager object */
+		kfree(hio_mgr);
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== bridge_io_on_loaded ========
+ *  Purpose:
+ *      Called when a new program is loaded to get shared memory buffer
+ *      parameters from COFF file. ulSharedBufferBase and ulSharedBufferLimit
+ *      are in DSP address units.
+ */
+int bridge_io_on_loaded(struct io_mgr *hio_mgr)
+{
+	struct cod_manager *cod_man;
+	struct chnl_mgr *hchnl_mgr;
+	struct msg_mgr *hmsg_mgr;
+	u32 ul_shm_base;
+	u32 ul_shm_base_offset;
+	u32 ul_shm_limit;
+	u32 ul_shm_length = -1;
+	u32 ul_mem_length = -1;
+	u32 ul_msg_base;
+	u32 ul_msg_limit;
+	u32 ul_msg_length = -1;
+	u32 ul_ext_end;
+	u32 ul_gpp_pa = 0;
+	u32 ul_gpp_va = 0;
+	u32 ul_dsp_va = 0;
+	u32 ul_seg_size = 0;
+	u32 ul_pad_size = 0;
+	u32 i;
+	int status = 0;
+	u8 num_procs = 0;
+	s32 ndx = 0;
+	/* DSP MMU setup table */
+	struct bridge_ioctl_extproc ae_proc[BRDIOCTL_NUMOFMMUTLB];
+	struct cfg_hostres *host_res;
+	struct bridge_dev_context *pbridge_context;
+	u32 map_attrs;
+	u32 shm0_end;
+	u32 ul_dyn_ext_base;
+	u32 ul_seg1_size = 0;
+	u32 pa_curr = 0;
+	u32 va_curr = 0;
+	u32 gpp_va_curr = 0;
+	u32 num_bytes = 0;
+	u32 all_bits = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
+
+	status = dev_get_bridge_context(hio_mgr->hdev_obj, &pbridge_context);
+	if (!pbridge_context) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	host_res = pbridge_context->resources;
+	if (!host_res) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	status = dev_get_cod_mgr(hio_mgr->hdev_obj, &cod_man);
+	if (!cod_man) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hchnl_mgr = hio_mgr->hchnl_mgr;
+	/* The message manager is destroyed when the board is stopped. */
+	dev_get_msg_mgr(hio_mgr->hdev_obj, &hio_mgr->hmsg_mgr);
+	hmsg_mgr = hio_mgr->hmsg_mgr;
+	if (!hchnl_mgr || !hmsg_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	if (hio_mgr->shared_mem)
+		hio_mgr->shared_mem = NULL;
+
+	/* Get start and length of channel part of shared memory */
+	status = cod_get_sym_value(cod_man, CHNL_SHARED_BUFFER_BASE_SYM,
+				   &ul_shm_base);
+	if (status) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	status = cod_get_sym_value(cod_man, CHNL_SHARED_BUFFER_LIMIT_SYM,
+				   &ul_shm_limit);
+	if (status) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	if (ul_shm_limit <= ul_shm_base) {
+		status = -EINVAL;
+		goto func_end;
+	}
+	/* Get total length in bytes */
+	ul_shm_length = (ul_shm_limit - ul_shm_base + 1) * hio_mgr->word_size;
+	/* Calculate size of a PROCCOPY shared memory region */
+	dev_dbg(bridge, "%s: (proc)proccopy shmmem size: 0x%x bytes\n",
+		__func__, (ul_shm_length - sizeof(struct shm)));
+
+	/* Get start and length of message part of shared memory */
+	status = cod_get_sym_value(cod_man, MSG_SHARED_BUFFER_BASE_SYM,
+					   &ul_msg_base);
+	if (!status) {
+		status = cod_get_sym_value(cod_man, MSG_SHARED_BUFFER_LIMIT_SYM,
+					   &ul_msg_limit);
+		if (!status) {
+			if (ul_msg_limit <= ul_msg_base) {
+				status = -EINVAL;
+			} else {
+				/*
+				 * Length (bytes) of messaging part of shared
+				 * memory.
+				 */
+				ul_msg_length =
+				    (ul_msg_limit - ul_msg_base +
+				     1) * hio_mgr->word_size;
+				/*
+				 * Total length (bytes) of shared memory:
+				 * chnl + msg.
+				 */
+				ul_mem_length = ul_shm_length + ul_msg_length;
+			}
+		} else {
+			status = -EFAULT;
+		}
+	} else {
+		status = -EFAULT;
+	}
+	if (!status) {
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+		status =
+		    cod_get_sym_value(cod_man, DSP_TRACESEC_END, &shm0_end);
+#else
+		status = cod_get_sym_value(cod_man, SHM0_SHARED_END_SYM,
+					   &shm0_end);
+#endif
+		if (status)
+			status = -EFAULT;
+	}
+	if (!status) {
+		status =
+		    cod_get_sym_value(cod_man, DYNEXTBASE, &ul_dyn_ext_base);
+		if (status)
+			status = -EFAULT;
+	}
+	if (!status) {
+		status = cod_get_sym_value(cod_man, EXTEND, &ul_ext_end);
+		if (status)
+			status = -EFAULT;
+	}
+	if (!status) {
+		/* Get memory reserved in host resources */
+		(void)mgr_enum_processor_info(0, (struct dsp_processorinfo *)
+					      &hio_mgr->ext_proc_info,
+					      sizeof(struct
+						     mgr_processorextinfo),
+					      &num_procs);
+
+		/* The first MMU TLB entry(TLB_0) in DCD is ShmBase. */
+		ndx = 0;
+		ul_gpp_pa = host_res->dw_mem_phys[1];
+		ul_gpp_va = host_res->dw_mem_base[1];
+		/* This is the virtual uncached ioremapped address!!! */
+		/* Why can't we directly take the DSPVA from the symbols? */
+		ul_dsp_va = hio_mgr->ext_proc_info.ty_tlb[0].ul_dsp_virt;
+		ul_seg_size = (shm0_end - ul_dsp_va) * hio_mgr->word_size;
+		ul_seg1_size =
+		    (ul_ext_end - ul_dyn_ext_base) * hio_mgr->word_size;
+		/* 4K align */
+		ul_seg1_size = (ul_seg1_size + 0xFFF) & (~0xFFFUL);
+		/* 64K align */
+		ul_seg_size = (ul_seg_size + 0xFFFF) & (~0xFFFFUL);
+		ul_pad_size = UL_PAGE_ALIGN_SIZE - ((ul_gpp_pa + ul_seg1_size) %
+						    UL_PAGE_ALIGN_SIZE);
+		if (ul_pad_size == UL_PAGE_ALIGN_SIZE)
+			ul_pad_size = 0x0;
+
+		dev_dbg(bridge, "%s: ul_gpp_pa %x, ul_gpp_va %x, ul_dsp_va %x, "
+			"shm0_end %x, ul_dyn_ext_base %x, ul_ext_end %x, "
+			"ul_seg_size %x ul_seg1_size %x \n", __func__,
+			ul_gpp_pa, ul_gpp_va, ul_dsp_va, shm0_end,
+			ul_dyn_ext_base, ul_ext_end, ul_seg_size, ul_seg1_size);
+
+		if ((ul_seg_size + ul_seg1_size + ul_pad_size) >
+		    host_res->dw_mem_length[1]) {
+			pr_err("%s: shm Error, reserved 0x%x required 0x%x\n",
+			       __func__, host_res->dw_mem_length[1],
+			       ul_seg_size + ul_seg1_size + ul_pad_size);
+			status = -ENOMEM;
+		}
+	}
+	if (status)
+		goto func_end;
+
+	pa_curr = ul_gpp_pa;
+	va_curr = ul_dyn_ext_base * hio_mgr->word_size;
+	gpp_va_curr = ul_gpp_va;
+	num_bytes = ul_seg1_size;
+
+	/*
+	 * Try to fit into TLB entries. If not possible, push them to page
+	 * tables. It is quite possible that if sections are not on
+	 * bigger page boundary, we may end up making several small pages.
+	 * So, push them onto page tables, if that is the case.
+	 */
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
+
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits %x, pa_curr %x, va_curr %x, "
+			"num_bytes %x\n", all_bits, pa_curr, va_curr,
+			num_bytes);
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				if (status)
+					goto func_end;
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				gpp_va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/*
+				 * Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size.
+				 */
+				break;
+			}
+		}
+	}
+	pa_curr += ul_pad_size;
+	va_curr += ul_pad_size;
+	gpp_va_curr += ul_pad_size;
+
+	/* Configure the TLB entries for the next cacheable segment */
+	num_bytes = ul_seg_size;
+	va_curr = ul_dsp_va * hio_mgr->word_size;
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits for Seg1 %x, pa_curr %x, "
+			"va_curr %x, num_bytes %x\n", all_bits, pa_curr,
+			va_curr, num_bytes);
+		for (i = 0; i < 4; i++) {
+			if (!(num_bytes >= page_size[i]) ||
+			    !((all_bits & (page_size[i] - 1)) == 0))
+				continue;
+			if (ndx < MAX_LOCK_TLB_ENTRIES) {
+				/*
+				 * This is the physical address written to
+				 * DSP MMU.
+				 */
+				ae_proc[ndx].ul_gpp_pa = pa_curr;
+				/*
+				 * This is the virtual uncached ioremapped
+				 * address!!!
+				 */
+				ae_proc[ndx].ul_gpp_va = gpp_va_curr;
+				ae_proc[ndx].ul_dsp_va =
+				    va_curr / hio_mgr->word_size;
+				ae_proc[ndx].ul_size = page_size[i];
+				ae_proc[ndx].endianism = HW_LITTLE_ENDIAN;
+				ae_proc[ndx].elem_size = HW_ELEM_SIZE16BIT;
+				ae_proc[ndx].mixed_mode = HW_MMU_CPUES;
+				dev_dbg(bridge, "shm MMU TLB entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				ndx++;
+			} else {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				dev_dbg(bridge,
+					"shm MMU PTE entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				if (status)
+					goto func_end;
+			}
+			pa_curr += page_size[i];
+			va_curr += page_size[i];
+			gpp_va_curr += page_size[i];
+			num_bytes -= page_size[i];
+			/*
+			 * Don't try smaller sizes. Hopefully we have reached
+			 * an address aligned to a bigger page size.
+			 */
+			break;
+		}
+	}
+
+	/*
+	 * Copy remaining entries from CDB. All entries are 1 MB and
+	 * should not conflict with shm entries on MPU or DSP side.
+	 */
+	for (i = 3; i < 7 && ndx < BRDIOCTL_NUMOFMMUTLB; i++) {
+		if (hio_mgr->ext_proc_info.ty_tlb[i].ul_gpp_phys == 0)
+			continue;
+
+		if ((hio_mgr->ext_proc_info.ty_tlb[i].ul_gpp_phys >
+		     ul_gpp_pa - 0x100000
+		     && hio_mgr->ext_proc_info.ty_tlb[i].ul_gpp_phys <=
+		     ul_gpp_pa + ul_seg_size)
+		    || (hio_mgr->ext_proc_info.ty_tlb[i].ul_dsp_virt >
+			ul_dsp_va - 0x100000 / hio_mgr->word_size
+			&& hio_mgr->ext_proc_info.ty_tlb[i].ul_dsp_virt <=
+			ul_dsp_va + ul_seg_size / hio_mgr->word_size)) {
+			dev_dbg(bridge,
+				"CDB MMU entry %d conflicts with "
+				"shm.\n\tCDB: GppPa %x, DspVa %x.\n\tSHM: "
+				"GppPa %x, DspVa %x, Bytes %x.\n", i,
+				hio_mgr->ext_proc_info.ty_tlb[i].ul_gpp_phys,
+				hio_mgr->ext_proc_info.ty_tlb[i].ul_dsp_virt,
+				ul_gpp_pa, ul_dsp_va, ul_seg_size);
+			status = -EPERM;
+		} else {
+			if (ndx < MAX_LOCK_TLB_ENTRIES) {
+				ae_proc[ndx].ul_dsp_va =
+				    hio_mgr->ext_proc_info.ty_tlb[i].
+				    ul_dsp_virt;
+				ae_proc[ndx].ul_gpp_pa =
+				    hio_mgr->ext_proc_info.ty_tlb[i].
+				    ul_gpp_phys;
+				ae_proc[ndx].ul_gpp_va = 0;
+				/* 1 MB */
+				ae_proc[ndx].ul_size = 0x100000;
+				dev_dbg(bridge, "shm MMU entry PA %x "
+					"DSP_VA 0x%x\n", ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_dsp_va);
+				ndx++;
+			} else {
+				status = hio_mgr->intf_fxns->pfn_brd_mem_map
+				    (hio_mgr->hbridge_context,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_gpp_phys,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_dsp_virt, 0x100000, map_attrs,
+				     NULL);
+			}
+		}
+		if (status)
+			goto func_end;
+	}
+
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
+
+	/* Map the L4 peripherals */
+	i = 0;
+	while (l4_peripheral_table[i].phys_addr) {
+		status = hio_mgr->intf_fxns->pfn_brd_mem_map
+		    (hio_mgr->hbridge_context, l4_peripheral_table[i].phys_addr,
+		     l4_peripheral_table[i].dsp_virt_addr, HW_PAGE_SIZE4KB,
+		     map_attrs, NULL);
+		if (status)
+			goto func_end;
+		i++;
+	}
+
+	for (i = ndx; i < BRDIOCTL_NUMOFMMUTLB; i++) {
+		ae_proc[i].ul_dsp_va = 0;
+		ae_proc[i].ul_gpp_pa = 0;
+		ae_proc[i].ul_gpp_va = 0;
+		ae_proc[i].ul_size = 0;
+	}
+	/*
+	 * Set the shm physical address entry (grayed out in CDB file)
+	 * to the virtual uncached ioremapped address of shm reserved
+	 * on MPU.
+	 */
+	hio_mgr->ext_proc_info.ty_tlb[0].ul_gpp_phys =
+	    (ul_gpp_va + ul_seg1_size + ul_pad_size);
+
+	/*
+	 * Need shm Phys addr. IO supports only one DSP for now:
+	 * num_procs = 1.
+	 */
+	if (!hio_mgr->ext_proc_info.ty_tlb[0].ul_gpp_phys || num_procs != 1) {
+		status = -EFAULT;
+		goto func_end;
+	} else {
+		if (ae_proc[0].ul_dsp_va > ul_shm_base) {
+			status = -EPERM;
+			goto func_end;
+		}
+		/* ul_shm_base may not be at ul_dsp_va address */
+		ul_shm_base_offset = (ul_shm_base - ae_proc[0].ul_dsp_va) *
+		    hio_mgr->word_size;
+		/*
+		 * bridge_dev_ctrl() will set dev context dsp-mmu info. In
+		 * bridge_brd_start() the MMU will be re-programed with MMU
+		 * DSPVa-GPPPa pair info while DSP is in a known
+		 * (reset) state.
+		 */
+
+		status =
+		    hio_mgr->intf_fxns->pfn_dev_cntrl(hio_mgr->hbridge_context,
+						      BRDIOCTL_SETMMUCONFIG,
+						      ae_proc);
+		if (status)
+			goto func_end;
+		ul_shm_base = hio_mgr->ext_proc_info.ty_tlb[0].ul_gpp_phys;
+		ul_shm_base += ul_shm_base_offset;
+		ul_shm_base = (u32) MEM_LINEAR_ADDRESS((void *)ul_shm_base,
+						       ul_mem_length);
+		if (ul_shm_base == 0) {
+			status = -EFAULT;
+			goto func_end;
+		}
+		/* Register SM */
+		status =
+		    register_shm_segs(hio_mgr, cod_man, ae_proc[0].ul_gpp_pa);
+	}
+
+	hio_mgr->shared_mem = (struct shm *)ul_shm_base;
+	hio_mgr->input = (u8 *) hio_mgr->shared_mem + sizeof(struct shm);
+	hio_mgr->output = hio_mgr->input + (ul_shm_length -
+					    sizeof(struct shm)) / 2;
+	hio_mgr->usm_buf_size = hio_mgr->output - hio_mgr->input;
+
+	/*  Set up Shared memory addresses for messaging. */
+	hio_mgr->msg_input_ctrl = (struct msg_ctrl *)((u8 *) hio_mgr->shared_mem
+						      + ul_shm_length);
+	hio_mgr->msg_input =
+	    (u8 *) hio_mgr->msg_input_ctrl + sizeof(struct msg_ctrl);
+	hio_mgr->msg_output_ctrl =
+	    (struct msg_ctrl *)((u8 *) hio_mgr->msg_input_ctrl +
+				ul_msg_length / 2);
+	hio_mgr->msg_output =
+	    (u8 *) hio_mgr->msg_output_ctrl + sizeof(struct msg_ctrl);
+	hmsg_mgr->max_msgs =
+	    ((u8 *) hio_mgr->msg_output_ctrl - hio_mgr->msg_input)
+	    / sizeof(struct msg_dspmsg);
+	dev_dbg(bridge, "IO MGR shm details: shared_mem %p, input %p, "
+		"output %p, msg_input_ctrl %p, msg_input %p, "
+		"msg_output_ctrl %p, msg_output %p\n",
+		(u8 *) hio_mgr->shared_mem, hio_mgr->input,
+		hio_mgr->output, (u8 *) hio_mgr->msg_input_ctrl,
+		hio_mgr->msg_input, (u8 *) hio_mgr->msg_output_ctrl,
+		hio_mgr->msg_output);
+	dev_dbg(bridge, "(proc) Mas msgs in shared memory: 0x%x\n",
+		hmsg_mgr->max_msgs);
+	memset((void *)hio_mgr->shared_mem, 0, sizeof(struct shm));
+
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+	/* Get the start address of trace buffer */
+	status = cod_get_sym_value(cod_man, SYS_PUTCBEG,
+				   &hio_mgr->ul_trace_buffer_begin);
+	if (status) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	hio_mgr->ul_gpp_read_pointer = hio_mgr->ul_trace_buffer_begin =
+	    (ul_gpp_va + ul_seg1_size + ul_pad_size) +
+	    (hio_mgr->ul_trace_buffer_begin - ul_dsp_va);
+	/* Get the end address of trace buffer */
+	status = cod_get_sym_value(cod_man, SYS_PUTCEND,
+				   &hio_mgr->ul_trace_buffer_end);
+	if (status) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hio_mgr->ul_trace_buffer_end =
+	    (ul_gpp_va + ul_seg1_size + ul_pad_size) +
+	    (hio_mgr->ul_trace_buffer_end - ul_dsp_va);
+	/* Get the current address of DSP write pointer */
+	status = cod_get_sym_value(cod_man, BRIDGE_SYS_PUTC_CURRENT,
+				   &hio_mgr->ul_trace_buffer_current);
+	if (status) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hio_mgr->ul_trace_buffer_current =
+	    (ul_gpp_va + ul_seg1_size + ul_pad_size) +
+	    (hio_mgr->ul_trace_buffer_current - ul_dsp_va);
+	/* Calculate the size of trace buffer */
+	kfree(hio_mgr->pmsg);
+	hio_mgr->pmsg = kmalloc(((hio_mgr->ul_trace_buffer_end -
+				hio_mgr->ul_trace_buffer_begin) *
+				hio_mgr->word_size) + 2, GFP_KERNEL);
+	if (!hio_mgr->pmsg)
+		status = -ENOMEM;
+
+	hio_mgr->ul_dsp_va = ul_dsp_va;
+	hio_mgr->ul_gpp_va = (ul_gpp_va + ul_seg1_size + ul_pad_size);
+
+#endif
+func_end:
+	return status;
+}
+
+/*
+ *  ======== io_buf_size ========
+ *      Size of shared memory I/O channel.
+ */
+u32 io_buf_size(struct io_mgr *hio_mgr)
+{
+	if (hio_mgr)
+		return hio_mgr->usm_buf_size;
+	else
+		return 0;
+}
+
+/*
+ *  ======== io_cancel_chnl ========
+ *      Cancel IO on a given PCPY channel.
+ */
+void io_cancel_chnl(struct io_mgr *hio_mgr, u32 chnl)
+{
+	struct io_mgr *pio_mgr = (struct io_mgr *)hio_mgr;
+	struct shm *sm;
+
+	if (!hio_mgr)
+		goto func_end;
+	sm = hio_mgr->shared_mem;
+
+	/* Inform DSP that we have no more buffers on this channel */
+	set_chnl_free(sm, chnl);
+
+	sm_interrupt_dsp(pio_mgr->hbridge_context, MBX_PCPY_CLASS);
+func_end:
+	return;
+}
+
+
+/*
+ *  ======== io_dispatch_pm ========
+ *      Performs I/O dispatch on PM related messages from DSP
+ */
+static void io_dispatch_pm(struct io_mgr *pio_mgr)
+{
+	int status;
+	u32 parg[2];
+
+	/* Perform Power message processing here */
+	parg[0] = pio_mgr->intr_val;
+
+	/* Send the command to the Bridge clk/pwr manager to handle */
+	if (parg[0] == MBX_PM_HIBERNATE_EN) {
+		dev_dbg(bridge, "PM: Hibernate command\n");
+		status = pio_mgr->intf_fxns->
+				pfn_dev_cntrl(pio_mgr->hbridge_context,
+					      BRDIOCTL_PWR_HIBERNATE, parg);
+		if (status)
+			pr_err("%s: hibernate cmd failed 0x%x\n",
+				       __func__, status);
+	} else if (parg[0] == MBX_PM_OPP_REQ) {
+		parg[1] = pio_mgr->shared_mem->opp_request.rqst_opp_pt;
+		dev_dbg(bridge, "PM: Requested OPP = 0x%x\n", parg[1]);
+		status = pio_mgr->intf_fxns->
+				pfn_dev_cntrl(pio_mgr->hbridge_context,
+					BRDIOCTL_CONSTRAINT_REQUEST, parg);
+		if (status)
+			dev_dbg(bridge, "PM: Failed to set constraint "
+				"= 0x%x\n", parg[1]);
+	} else {
+		dev_dbg(bridge, "PM: clk control value of msg = 0x%x\n",
+			parg[0]);
+		status = pio_mgr->intf_fxns->
+				pfn_dev_cntrl(pio_mgr->hbridge_context,
+					      BRDIOCTL_CLK_CTRL, parg);
+		if (status)
+			dev_dbg(bridge, "PM: Failed to ctrl the DSP clk"
+				"= 0x%x\n", *parg);
+	}
+}
+
+/*
+ *  ======== io_dpc ========
+ *      Deferred procedure call for shared memory channel driver ISR.  Carries
+ *      out the dispatch of I/O as a non-preemptible event.It can only be
+ *      pre-empted      by an ISR.
+ */
+void io_dpc(unsigned long ref_data)
+{
+	struct io_mgr *pio_mgr = (struct io_mgr *)ref_data;
+	struct chnl_mgr *chnl_mgr_obj;
+	struct msg_mgr *msg_mgr_obj;
+	struct deh_mgr *hdeh_mgr;
+	u32 requested;
+	u32 serviced;
+
+	if (!pio_mgr)
+		goto func_end;
+	chnl_mgr_obj = pio_mgr->hchnl_mgr;
+	dev_get_msg_mgr(pio_mgr->hdev_obj, &msg_mgr_obj);
+	dev_get_deh_mgr(pio_mgr->hdev_obj, &hdeh_mgr);
+	if (!chnl_mgr_obj)
+		goto func_end;
+
+	requested = pio_mgr->dpc_req;
+	serviced = pio_mgr->dpc_sched;
+
+	if (serviced == requested)
+		goto func_end;
+
+	/* Process pending DPC's */
+	do {
+		/* Check value of interrupt reg to ensure it's a valid error */
+		if ((pio_mgr->intr_val > DEH_BASE) &&
+		    (pio_mgr->intr_val < DEH_LIMIT)) {
+			/* Notify DSP/BIOS exception */
+			if (hdeh_mgr) {
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+				print_dsp_debug_trace(pio_mgr);
+#endif
+				bridge_deh_notify(hdeh_mgr, DSP_SYSERROR,
+						  pio_mgr->intr_val);
+			}
+		}
+		/* Proc-copy chanel dispatch */
+		input_chnl(pio_mgr, NULL, IO_SERVICE);
+		output_chnl(pio_mgr, NULL, IO_SERVICE);
+
+#ifdef CHNL_MESSAGES
+		if (msg_mgr_obj) {
+			/* Perform I/O dispatch on message queues */
+			input_msg(pio_mgr, msg_mgr_obj);
+			output_msg(pio_mgr, msg_mgr_obj);
+		}
+
+#endif
+#ifdef CONFIG_TIDSPBRIDGE_DEBUG
+		if (pio_mgr->intr_val & MBX_DBG_SYSPRINTF) {
+			/* Notify DSP Trace message */
+			print_dsp_debug_trace(pio_mgr);
+		}
+#endif
+		serviced++;
+	} while (serviced != requested);
+	pio_mgr->dpc_sched = requested;
+func_end:
+	return;
+}
+
+/*
+ *  ======== io_mbox_msg ========
+ *      Main interrupt handler for the shared memory IO manager.
+ *      Calls the Bridge's CHNL_ISR to determine if this interrupt is ours, then
+ *      schedules a DPC to dispatch I/O.
+ */
+void io_mbox_msg(u32 msg)
+{
+	struct io_mgr *pio_mgr;
+	struct dev_object *dev_obj;
+	unsigned long flags;
+
+	dev_obj = dev_get_first();
+	dev_get_io_mgr(dev_obj, &pio_mgr);
+
+	if (!pio_mgr)
+		return;
+
+	pio_mgr->intr_val = (u16)msg;
+	if (pio_mgr->intr_val & MBX_PM_CLASS)
+		io_dispatch_pm(pio_mgr);
+
+	if (pio_mgr->intr_val == MBX_DEH_RESET) {
+		pio_mgr->intr_val = 0;
+	} else {
+		spin_lock_irqsave(&pio_mgr->dpc_lock, flags);
+		pio_mgr->dpc_req++;
+		spin_unlock_irqrestore(&pio_mgr->dpc_lock, flags);
+		tasklet_schedule(&pio_mgr->dpc_tasklet);
+	}
+	return;
+}
+
+/*
+ *  ======== io_request_chnl ========
+ *  Purpose:
+ *      Request chanenel I/O from the DSP. Sets flags in shared memory, then
+ *      interrupts the DSP.
+ */
+void io_request_chnl(struct io_mgr *io_manager, struct chnl_object *pchnl,
+			u8 io_mode, u16 *mbx_val)
+{
+	struct chnl_mgr *chnl_mgr_obj;
+	struct shm *sm;
+
+	if (!pchnl || !mbx_val)
+		goto func_end;
+	chnl_mgr_obj = io_manager->hchnl_mgr;
+	sm = io_manager->shared_mem;
+	if (io_mode == IO_INPUT) {
+		/*
+		 * Assertion fires if CHNL_AddIOReq() called on a stream
+		 * which was cancelled, or attached to a dead board.
+		 */
+		DBC_ASSERT((pchnl->dw_state == CHNL_STATEREADY) ||
+			   (pchnl->dw_state == CHNL_STATEEOS));
+		/* Indicate to the DSP we have a buffer available for input */
+		set_chnl_busy(sm, pchnl->chnl_id);
+		*mbx_val = MBX_PCPY_CLASS;
+	} else if (io_mode == IO_OUTPUT) {
+		/*
+		 * This assertion fails if CHNL_AddIOReq() was called on a
+		 * stream which was cancelled, or attached to a dead board.
+		 */
+		DBC_ASSERT((pchnl->dw_state & ~CHNL_STATEEOS) ==
+			   CHNL_STATEREADY);
+		/*
+		 * Record the fact that we have a buffer available for
+		 * output.
+		 */
+		chnl_mgr_obj->dw_output_mask |= (1 << pchnl->chnl_id);
+	} else {
+		DBC_ASSERT(io_mode);	/* Shouldn't get here. */
+	}
+func_end:
+	return;
+}
+
+/*
+ *  ======== iosm_schedule ========
+ *      Schedule DPC for IO.
+ */
+void iosm_schedule(struct io_mgr *io_manager)
+{
+	unsigned long flags;
+
+	if (!io_manager)
+		return;
+
+	/* Increment count of DPC's pending. */
+	spin_lock_irqsave(&io_manager->dpc_lock, flags);
+	io_manager->dpc_req++;
+	spin_unlock_irqrestore(&io_manager->dpc_lock, flags);
+
+	/* Schedule DPC */
+	tasklet_schedule(&io_manager->dpc_tasklet);
+}
+
+/*
+ *  ======== find_ready_output ========
+ *      Search for a host output channel which is ready to send.  If this is
+ *      called as a result of servicing the DPC, then implement a round
+ *      robin search; otherwise, this was called by a client thread (via
+ *      IO_Dispatch()), so just start searching from the current channel id.
+ */
+static u32 find_ready_output(struct chnl_mgr *chnl_mgr_obj,
+			     struct chnl_object *pchnl, u32 mask)
+{
+	u32 ret = OUTPUTNOTREADY;
+	u32 id, start_id;
+	u32 shift;
+
+	id = (pchnl !=
+	      NULL ? pchnl->chnl_id : (chnl_mgr_obj->dw_last_output + 1));
+	id = ((id == CHNL_MAXCHANNELS) ? 0 : id);
+	if (id >= CHNL_MAXCHANNELS)
+		goto func_end;
+	if (mask) {
+		shift = (1 << id);
+		start_id = id;
+		do {
+			if (mask & shift) {
+				ret = id;
+				if (pchnl == NULL)
+					chnl_mgr_obj->dw_last_output = id;
+				break;
+			}
+			id = id + 1;
+			id = ((id == CHNL_MAXCHANNELS) ? 0 : id);
+			shift = (1 << id);
+		} while (id != start_id);
+	}
+func_end:
+	return ret;
+}
+
+/*
+ *  ======== input_chnl ========
+ *      Dispatch a buffer on an input channel.
+ */
+static void input_chnl(struct io_mgr *pio_mgr, struct chnl_object *pchnl,
+			u8 io_mode)
+{
+	struct chnl_mgr *chnl_mgr_obj;
+	struct shm *sm;
+	u32 chnl_id;
+	u32 bytes;
+	struct chnl_irp *chnl_packet_obj = NULL;
+	u32 dw_arg;
+	bool clear_chnl = false;
+	bool notify_client = false;
+
+	sm = pio_mgr->shared_mem;
+	chnl_mgr_obj = pio_mgr->hchnl_mgr;
+
+	/* Attempt to perform input */
+	if (!sm->input_full)
+		goto func_end;
+
+	bytes = sm->input_size * chnl_mgr_obj->word_size;
+	chnl_id = sm->input_id;
+	dw_arg = sm->arg;
+	if (chnl_id >= CHNL_MAXCHANNELS) {
+		/* Shouldn't be here: would indicate corrupted shm. */
+		DBC_ASSERT(chnl_id);
+		goto func_end;
+	}
+	pchnl = chnl_mgr_obj->ap_channel[chnl_id];
+	if ((pchnl != NULL) && CHNL_IS_INPUT(pchnl->chnl_mode)) {
+		if ((pchnl->dw_state & ~CHNL_STATEEOS) == CHNL_STATEREADY) {
+			if (!pchnl->pio_requests)
+				goto func_end;
+			/* Get the I/O request, and attempt a transfer */
+			chnl_packet_obj = (struct chnl_irp *)
+			    lst_get_head(pchnl->pio_requests);
+			if (chnl_packet_obj) {
+				pchnl->cio_reqs--;
+				if (pchnl->cio_reqs < 0)
+					goto func_end;
+				/*
+				 * Ensure we don't overflow the client's
+				 * buffer.
+				 */
+				bytes = min(bytes, chnl_packet_obj->byte_size);
+				memcpy(chnl_packet_obj->host_sys_buf,
+						pio_mgr->input, bytes);
+				pchnl->bytes_moved += bytes;
+				chnl_packet_obj->byte_size = bytes;
+				chnl_packet_obj->dw_arg = dw_arg;
+				chnl_packet_obj->status = CHNL_IOCSTATCOMPLETE;
+
+				if (bytes == 0) {
+					/*
+					 * This assertion fails if the DSP
+					 * sends EOS more than once on this
+					 * channel.
+					 */
+					if (pchnl->dw_state & CHNL_STATEEOS)
+						goto func_end;
+					/*
+					 * Zero bytes indicates EOS. Update
+					 * IOC status for this chirp, and also
+					 * the channel state.
+					 */
+					chnl_packet_obj->status |=
+					    CHNL_IOCSTATEOS;
+					pchnl->dw_state |= CHNL_STATEEOS;
+					/*
+					 * Notify that end of stream has
+					 * occurred.
+					 */
+					ntfy_notify(pchnl->ntfy_obj,
+						    DSP_STREAMDONE);
+				}
+				/* Tell DSP if no more I/O buffers available */
+				if (!pchnl->pio_requests)
+					goto func_end;
+				if (LST_IS_EMPTY(pchnl->pio_requests)) {
+					set_chnl_free(sm, pchnl->chnl_id);
+				}
+				clear_chnl = true;
+				notify_client = true;
+			} else {
+				/*
+				 * Input full for this channel, but we have no
+				 * buffers available.  The channel must be
+				 * "idling". Clear out the physical input
+				 * channel.
+				 */
+				clear_chnl = true;
+			}
+		} else {
+			/* Input channel cancelled: clear input channel */
+			clear_chnl = true;
+		}
+	} else {
+		/* DPC fired after host closed channel: clear input channel */
+		clear_chnl = true;
+	}
+	if (clear_chnl) {
+		/* Indicate to the DSP we have read the input */
+		sm->input_full = 0;
+		sm_interrupt_dsp(pio_mgr->hbridge_context, MBX_PCPY_CLASS);
+	}
+	if (notify_client) {
+		/* Notify client with IO completion record */
+		notify_chnl_complete(pchnl, chnl_packet_obj);
+	}
+func_end:
+	return;
+}
+
+/*
+ *  ======== input_msg ========
+ *      Copies messages from shared memory to the message queues.
+ */
+static void input_msg(struct io_mgr *pio_mgr, struct msg_mgr *hmsg_mgr)
+{
+	u32 num_msgs;
+	u32 i;
+	u8 *msg_input;
+	struct msg_queue *msg_queue_obj;
+	struct msg_frame *pmsg;
+	struct msg_dspmsg msg;
+	struct msg_ctrl *msg_ctr_obj;
+	u32 input_empty;
+	u32 addr;
+
+	msg_ctr_obj = pio_mgr->msg_input_ctrl;
+	/* Get the number of input messages to be read */
+	input_empty = msg_ctr_obj->buf_empty;
+	num_msgs = msg_ctr_obj->size;
+	if (input_empty)
+		goto func_end;
+
+	msg_input = pio_mgr->msg_input;
+	for (i = 0; i < num_msgs; i++) {
+		/* Read the next message */
+		addr = (u32) &(((struct msg_dspmsg *)msg_input)->msg.dw_cmd);
+		msg.msg.dw_cmd =
+		    read_ext32_bit_dsp_data(pio_mgr->hbridge_context, addr);
+		addr = (u32) &(((struct msg_dspmsg *)msg_input)->msg.dw_arg1);
+		msg.msg.dw_arg1 =
+		    read_ext32_bit_dsp_data(pio_mgr->hbridge_context, addr);
+		addr = (u32) &(((struct msg_dspmsg *)msg_input)->msg.dw_arg2);
+		msg.msg.dw_arg2 =
+		    read_ext32_bit_dsp_data(pio_mgr->hbridge_context, addr);
+		addr = (u32) &(((struct msg_dspmsg *)msg_input)->msgq_id);
+		msg.msgq_id =
+		    read_ext32_bit_dsp_data(pio_mgr->hbridge_context, addr);
+		msg_input += sizeof(struct msg_dspmsg);
+		if (!hmsg_mgr->queue_list)
+			goto func_end;
+
+		/* Determine which queue to put the message in */
+		msg_queue_obj =
+		    (struct msg_queue *)lst_first(hmsg_mgr->queue_list);
+		dev_dbg(bridge,	"input msg: dw_cmd=0x%x dw_arg1=0x%x "
+			"dw_arg2=0x%x msgq_id=0x%x \n", msg.msg.dw_cmd,
+			msg.msg.dw_arg1, msg.msg.dw_arg2, msg.msgq_id);
+		/*
+		 * Interrupt may occur before shared memory and message
+		 * input locations have been set up. If all nodes were
+		 * cleaned up, hmsg_mgr->max_msgs should be 0.
+		 */
+		while (msg_queue_obj != NULL) {
+			if (msg.msgq_id == msg_queue_obj->msgq_id) {
+				/* Found it */
+				if (msg.msg.dw_cmd == RMS_EXITACK) {
+					/*
+					 * Call the node exit notification.
+					 * The exit message does not get
+					 * queued.
+					 */
+					(*hmsg_mgr->on_exit) ((void *)
+							   msg_queue_obj->arg,
+							   msg.msg.dw_arg1);
+				} else {
+					/*
+					 * Not an exit acknowledgement, queue
+					 * the message.
+					 */
+					if (!msg_queue_obj->msg_free_list)
+						goto func_end;
+					pmsg = (struct msg_frame *)lst_get_head
+					    (msg_queue_obj->msg_free_list);
+					if (msg_queue_obj->msg_used_list
+					    && pmsg) {
+						pmsg->msg_data = msg;
+						lst_put_tail
+						 (msg_queue_obj->msg_used_list,
+						     (struct list_head *)pmsg);
+						ntfy_notify
+						    (msg_queue_obj->ntfy_obj,
+						     DSP_NODEMESSAGEREADY);
+						sync_set_event
+						    (msg_queue_obj->sync_event);
+					} else {
+						/*
+						 * No free frame to copy the
+						 * message into.
+						 */
+						pr_err("%s: no free msg frames,"
+						       " discarding msg\n",
+						       __func__);
+					}
+				}
+				break;
+			}
+
+			if (!hmsg_mgr->queue_list || !msg_queue_obj)
+				goto func_end;
+			msg_queue_obj =
+			    (struct msg_queue *)lst_next(hmsg_mgr->queue_list,
+							 (struct list_head *)
+							 msg_queue_obj);
+		}
+	}
+	/* Set the post SWI flag */
+	if (num_msgs > 0) {
+		/* Tell the DSP we've read the messages */
+		msg_ctr_obj->buf_empty = true;
+		msg_ctr_obj->post_swi = true;
+		sm_interrupt_dsp(pio_mgr->hbridge_context, MBX_PCPY_CLASS);
+	}
+func_end:
+	return;
+}
+
+/*
+ *  ======== notify_chnl_complete ========
+ *  Purpose:
+ *      Signal the channel event, notifying the client that I/O has completed.
+ */
+static void notify_chnl_complete(struct chnl_object *pchnl,
+				 struct chnl_irp *chnl_packet_obj)
+{
+	bool signal_event;
+
+	if (!pchnl || !pchnl->sync_event ||
+	    !pchnl->pio_completions || !chnl_packet_obj)
+		goto func_end;
+
+	/*
+	 * Note: we signal the channel event only if the queue of IO
+	 * completions is empty.  If it is not empty, the event is sure to be
+	 * signalled by the only IO completion list consumer:
+	 * bridge_chnl_get_ioc().
+	 */
+	signal_event = LST_IS_EMPTY(pchnl->pio_completions);
+	/* Enqueue the IO completion info for the client */
+	lst_put_tail(pchnl->pio_completions,
+		     (struct list_head *)chnl_packet_obj);
+	pchnl->cio_cs++;
+
+	if (pchnl->cio_cs > pchnl->chnl_packets)
+		goto func_end;
+	/* Signal the channel event (if not already set) that IO is complete */
+	if (signal_event)
+		sync_set_event(pchnl->sync_event);
+
+	/* Notify that IO is complete */
+	ntfy_notify(pchnl->ntfy_obj, DSP_STREAMIOCOMPLETION);
+func_end:
+	return;
+}
+
+/*
+ *  ======== output_chnl ========
+ *  Purpose:
+ *      Dispatch a buffer on an output channel.
+ */
+static void output_chnl(struct io_mgr *pio_mgr, struct chnl_object *pchnl,
+			u8 io_mode)
+{
+	struct chnl_mgr *chnl_mgr_obj;
+	struct shm *sm;
+	u32 chnl_id;
+	struct chnl_irp *chnl_packet_obj;
+	u32 dw_dsp_f_mask;
+
+	chnl_mgr_obj = pio_mgr->hchnl_mgr;
+	sm = pio_mgr->shared_mem;
+	/* Attempt to perform output */
+	if (sm->output_full)
+		goto func_end;
+
+	if (pchnl && !((pchnl->dw_state & ~CHNL_STATEEOS) == CHNL_STATEREADY))
+		goto func_end;
+
+	/* Look to see if both a PC and DSP output channel are ready */
+	dw_dsp_f_mask = sm->dsp_free_mask;
+	chnl_id =
+	    find_ready_output(chnl_mgr_obj, pchnl,
+			      (chnl_mgr_obj->dw_output_mask & dw_dsp_f_mask));
+	if (chnl_id == OUTPUTNOTREADY)
+		goto func_end;
+
+	pchnl = chnl_mgr_obj->ap_channel[chnl_id];
+	if (!pchnl || !pchnl->pio_requests) {
+		/* Shouldn't get here */
+		goto func_end;
+	}
+	/* Get the I/O request, and attempt a transfer */
+	chnl_packet_obj = (struct chnl_irp *)lst_get_head(pchnl->pio_requests);
+	if (!chnl_packet_obj)
+		goto func_end;
+
+	pchnl->cio_reqs--;
+	if (pchnl->cio_reqs < 0 || !pchnl->pio_requests)
+		goto func_end;
+
+	/* Record fact that no more I/O buffers available */
+	if (LST_IS_EMPTY(pchnl->pio_requests))
+		chnl_mgr_obj->dw_output_mask &= ~(1 << chnl_id);
+
+	/* Transfer buffer to DSP side */
+	chnl_packet_obj->byte_size = min(pio_mgr->usm_buf_size,
+					chnl_packet_obj->byte_size);
+	memcpy(pio_mgr->output,	chnl_packet_obj->host_sys_buf,
+					chnl_packet_obj->byte_size);
+	pchnl->bytes_moved += chnl_packet_obj->byte_size;
+	/* Write all 32 bits of arg */
+	sm->arg = chnl_packet_obj->dw_arg;
+#if _CHNL_WORDSIZE == 2
+	/* Access can be different SM access word size (e.g. 16/32 bit words) */
+	sm->output_id = (u16) chnl_id;
+	sm->output_size = (u16) (chnl_packet_obj->byte_size +
+				chnl_mgr_obj->word_size - 1) /
+				(u16) chnl_mgr_obj->word_size;
+#else
+	sm->output_id = chnl_id;
+	sm->output_size = (chnl_packet_obj->byte_size +
+			chnl_mgr_obj->word_size - 1) / chnl_mgr_obj->word_size;
+#endif
+	sm->output_full =  1;
+	/* Indicate to the DSP we have written the output */
+	sm_interrupt_dsp(pio_mgr->hbridge_context, MBX_PCPY_CLASS);
+	/* Notify client with IO completion record (keep EOS) */
+	chnl_packet_obj->status &= CHNL_IOCSTATEOS;
+	notify_chnl_complete(pchnl, chnl_packet_obj);
+	/* Notify if stream is done. */
+	if (chnl_packet_obj->status & CHNL_IOCSTATEOS)
+		ntfy_notify(pchnl->ntfy_obj, DSP_STREAMDONE);
+
+func_end:
+	return;
+}
+
+/*
+ *  ======== output_msg ========
+ *      Copies messages from the message queues to the shared memory.
+ */
+static void output_msg(struct io_mgr *pio_mgr, struct msg_mgr *hmsg_mgr)
+{
+	u32 num_msgs = 0;
+	u32 i;
+	u8 *msg_output;
+	struct msg_frame *pmsg;
+	struct msg_ctrl *msg_ctr_obj;
+	u32 output_empty;
+	u32 val;
+	u32 addr;
+
+	msg_ctr_obj = pio_mgr->msg_output_ctrl;
+
+	/* Check if output has been cleared */
+	output_empty = msg_ctr_obj->buf_empty;
+	if (output_empty) {
+		num_msgs = (hmsg_mgr->msgs_pending > hmsg_mgr->max_msgs) ?
+		    hmsg_mgr->max_msgs : hmsg_mgr->msgs_pending;
+		msg_output = pio_mgr->msg_output;
+		/* Copy num_msgs messages into shared memory */
+		for (i = 0; i < num_msgs; i++) {
+			if (!hmsg_mgr->msg_used_list) {
+				pmsg = NULL;
+				goto func_end;
+			} else {
+				pmsg = (struct msg_frame *)
+				    lst_get_head(hmsg_mgr->msg_used_list);
+			}
+			if (pmsg != NULL) {
+				val = (pmsg->msg_data).msgq_id;
+				addr = (u32) &(((struct msg_dspmsg *)
+						 msg_output)->msgq_id);
+				write_ext32_bit_dsp_data(
+					pio_mgr->hbridge_context, addr, val);
+				val = (pmsg->msg_data).msg.dw_cmd;
+				addr = (u32) &((((struct msg_dspmsg *)
+						  msg_output)->msg).dw_cmd);
+				write_ext32_bit_dsp_data(
+					pio_mgr->hbridge_context, addr, val);
+				val = (pmsg->msg_data).msg.dw_arg1;
+				addr = (u32) &((((struct msg_dspmsg *)
+						  msg_output)->msg).dw_arg1);
+				write_ext32_bit_dsp_data(
+					pio_mgr->hbridge_context, addr, val);
+				val = (pmsg->msg_data).msg.dw_arg2;
+				addr = (u32) &((((struct msg_dspmsg *)
+						  msg_output)->msg).dw_arg2);
+				write_ext32_bit_dsp_data(
+					pio_mgr->hbridge_context, addr, val);
+				msg_output += sizeof(struct msg_dspmsg);
+				if (!hmsg_mgr->msg_free_list)
+					goto func_end;
+				lst_put_tail(hmsg_mgr->msg_free_list,
+					     (struct list_head *)pmsg);
+				sync_set_event(hmsg_mgr->sync_event);
+			}
+		}
+
+		if (num_msgs > 0) {
+			hmsg_mgr->msgs_pending -= num_msgs;
+#if _CHNL_WORDSIZE == 2
+			/*
+			 * Access can be different SM access word size
+			 * (e.g. 16/32 bit words)
+			 */
+			msg_ctr_obj->size = (u16) num_msgs;
+#else
+			msg_ctr_obj->size = num_msgs;
+#endif
+			msg_ctr_obj->buf_empty = false;
+			/* Set the post SWI flag */
+			msg_ctr_obj->post_swi = true;
+			/* Tell the DSP we have written the output. */
+			sm_interrupt_dsp(pio_mgr->hbridge_context,
+						MBX_PCPY_CLASS);
+		}
+	}
+func_end:
+	return;
+}
+
+/*
+ *  ======== register_shm_segs ========
+ *  purpose:
+ *      Registers GPP SM segment with CMM.
+ */
+static int register_shm_segs(struct io_mgr *hio_mgr,
+				    struct cod_manager *cod_man,
+				    u32 dw_gpp_base_pa)
+{
+	int status = 0;
+	u32 ul_shm0_base = 0;
+	u32 shm0_end = 0;
+	u32 ul_shm0_rsrvd_start = 0;
+	u32 ul_rsrvd_size = 0;
+	u32 ul_gpp_phys;
+	u32 ul_dsp_virt;
+	u32 ul_shm_seg_id0 = 0;
+	u32 dw_offset, dw_gpp_base_va, ul_dsp_size;
+
+	/*
+	 * Read address and size info for first SM region.
+	 * Get start of 1st SM Heap region.
+	 */
+	status =
+	    cod_get_sym_value(cod_man, SHM0_SHARED_BASE_SYM, &ul_shm0_base);
+	if (ul_shm0_base == 0) {
+		status = -EPERM;
+		goto func_end;
+	}
+	/* Get end of 1st SM Heap region */
+	if (!status) {
+		/* Get start and length of message part of shared memory */
+		status = cod_get_sym_value(cod_man, SHM0_SHARED_END_SYM,
+					   &shm0_end);
+		if (shm0_end == 0) {
+			status = -EPERM;
+			goto func_end;
+		}
+	}
+	/* Start of Gpp reserved region */
+	if (!status) {
+		/* Get start and length of message part of shared memory */
+		status =
+		    cod_get_sym_value(cod_man, SHM0_SHARED_RESERVED_BASE_SYM,
+				      &ul_shm0_rsrvd_start);
+		if (ul_shm0_rsrvd_start == 0) {
+			status = -EPERM;
+			goto func_end;
+		}
+	}
+	/* Register with CMM */
+	if (!status) {
+		status = dev_get_cmm_mgr(hio_mgr->hdev_obj, &hio_mgr->hcmm_mgr);
+		if (!status) {
+			status = cmm_un_register_gppsm_seg(hio_mgr->hcmm_mgr,
+							   CMM_ALLSEGMENTS);
+		}
+	}
+	/* Register new SM region(s) */
+	if (!status && (shm0_end - ul_shm0_base) > 0) {
+		/* Calc size (bytes) of SM the GPP can alloc from */
+		ul_rsrvd_size =
+		    (shm0_end - ul_shm0_rsrvd_start + 1) * hio_mgr->word_size;
+		if (ul_rsrvd_size <= 0) {
+			status = -EPERM;
+			goto func_end;
+		}
+		/* Calc size of SM DSP can alloc from */
+		ul_dsp_size =
+		    (ul_shm0_rsrvd_start - ul_shm0_base) * hio_mgr->word_size;
+		if (ul_dsp_size <= 0) {
+			status = -EPERM;
+			goto func_end;
+		}
+		/* First TLB entry reserved for Bridge SM use. */
+		ul_gpp_phys = hio_mgr->ext_proc_info.ty_tlb[0].ul_gpp_phys;
+		/* Get size in bytes */
+		ul_dsp_virt =
+		    hio_mgr->ext_proc_info.ty_tlb[0].ul_dsp_virt *
+		    hio_mgr->word_size;
+		/*
+		 * Calc byte offset used to convert GPP phys <-> DSP byte
+		 * address.
+		 */
+		if (dw_gpp_base_pa > ul_dsp_virt)
+			dw_offset = dw_gpp_base_pa - ul_dsp_virt;
+		else
+			dw_offset = ul_dsp_virt - dw_gpp_base_pa;
+
+		if (ul_shm0_rsrvd_start * hio_mgr->word_size < ul_dsp_virt) {
+			status = -EPERM;
+			goto func_end;
+		}
+		/*
+		 * Calc Gpp phys base of SM region.
+		 * This is actually uncached kernel virtual address.
+		 */
+		dw_gpp_base_va =
+		    ul_gpp_phys + ul_shm0_rsrvd_start * hio_mgr->word_size -
+		    ul_dsp_virt;
+		/*
+		 * Calc Gpp phys base of SM region.
+		 * This is the physical address.
+		 */
+		dw_gpp_base_pa =
+		    dw_gpp_base_pa + ul_shm0_rsrvd_start * hio_mgr->word_size -
+		    ul_dsp_virt;
+		/* Register SM Segment 0. */
+		status =
+		    cmm_register_gppsm_seg(hio_mgr->hcmm_mgr, dw_gpp_base_pa,
+					   ul_rsrvd_size, dw_offset,
+					   (dw_gpp_base_pa >
+					    ul_dsp_virt) ? CMM_ADDTODSPPA :
+					   CMM_SUBFROMDSPPA,
+					   (u32) (ul_shm0_base *
+						  hio_mgr->word_size),
+					   ul_dsp_size, &ul_shm_seg_id0,
+					   dw_gpp_base_va);
+		/* First SM region is seg_id = 1 */
+		if (ul_shm_seg_id0 != 1)
+			status = -EPERM;
+	}
+func_end:
+	return status;
+}
+
+/* ZCPY IO routines. */
+/*
+ *  ======== IO_SHMcontrol ========
+ *      Sets the requested shm setting.
+ */
+int io_sh_msetting(struct io_mgr *hio_mgr, u8 desc, void *pargs)
+{
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 i;
+	struct dspbridge_platform_data *pdata =
+	    omap_dspbridge_dev->dev.platform_data;
+
+	switch (desc) {
+	case SHM_CURROPP:
+		/* Update the shared memory with requested OPP information */
+		if (pargs != NULL)
+			hio_mgr->shared_mem->opp_table_struct.curr_opp_pt =
+			    *(u32 *) pargs;
+		else
+			return -EPERM;
+		break;
+	case SHM_OPPINFO:
+		/*
+		 * Update the shared memory with the voltage, frequency,
+		 * min and max frequency values for an OPP.
+		 */
+		for (i = 0; i <= dsp_max_opps; i++) {
+			hio_mgr->shared_mem->opp_table_struct.opp_point[i].
+			    voltage = vdd1_dsp_freq[i][0];
+			dev_dbg(bridge, "OPP-shm: voltage: %d\n",
+				vdd1_dsp_freq[i][0]);
+			hio_mgr->shared_mem->opp_table_struct.
+			    opp_point[i].frequency = vdd1_dsp_freq[i][1];
+			dev_dbg(bridge, "OPP-shm: frequency: %d\n",
+				vdd1_dsp_freq[i][1]);
+			hio_mgr->shared_mem->opp_table_struct.opp_point[i].
+			    min_freq = vdd1_dsp_freq[i][2];
+			dev_dbg(bridge, "OPP-shm: min freq: %d\n",
+				vdd1_dsp_freq[i][2]);
+			hio_mgr->shared_mem->opp_table_struct.opp_point[i].
+			    max_freq = vdd1_dsp_freq[i][3];
+			dev_dbg(bridge, "OPP-shm: max freq: %d\n",
+				vdd1_dsp_freq[i][3]);
+		}
+		hio_mgr->shared_mem->opp_table_struct.num_opp_pts =
+		    dsp_max_opps;
+		dev_dbg(bridge, "OPP-shm: max OPP number: %d\n", dsp_max_opps);
+		/* Update the current OPP number */
+		if (pdata->dsp_get_opp)
+			i = (*pdata->dsp_get_opp) ();
+		hio_mgr->shared_mem->opp_table_struct.curr_opp_pt = i;
+		dev_dbg(bridge, "OPP-shm: value programmed = %d\n", i);
+		break;
+	case SHM_GETOPP:
+		/* Get the OPP that DSP has requested */
+		*(u32 *) pargs = hio_mgr->shared_mem->opp_request.rqst_opp_pt;
+		break;
+	default:
+		break;
+	}
+#endif
+	return 0;
+}
+
+/*
+ *  ======== bridge_io_get_proc_load ========
+ *      Gets the Processor's Load information
+ */
+int bridge_io_get_proc_load(struct io_mgr *hio_mgr,
+				struct dsp_procloadstat *proc_lstat)
+{
+	proc_lstat->curr_load =
+			hio_mgr->shared_mem->load_mon_info.curr_dsp_load;
+	proc_lstat->predicted_load =
+	    hio_mgr->shared_mem->load_mon_info.pred_dsp_load;
+	proc_lstat->curr_dsp_freq =
+	    hio_mgr->shared_mem->load_mon_info.curr_dsp_freq;
+	proc_lstat->predicted_freq =
+	    hio_mgr->shared_mem->load_mon_info.pred_dsp_freq;
+
+	dev_dbg(bridge, "Curr Load = %d, Pred Load = %d, Curr Freq = %d, "
+		"Pred Freq = %d\n", proc_lstat->curr_load,
+		proc_lstat->predicted_load, proc_lstat->curr_dsp_freq,
+		proc_lstat->predicted_freq);
+	return 0;
+}
+
+void io_sm_init(void)
+{
+	/* Do nothing */
+}
+
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+void print_dsp_debug_trace(struct io_mgr *hio_mgr)
+{
+	u32 ul_new_message_length = 0, ul_gpp_cur_pointer;
+
+	while (true) {
+		/* Get the DSP current pointer */
+		ul_gpp_cur_pointer =
+		    *(u32 *) (hio_mgr->ul_trace_buffer_current);
+		ul_gpp_cur_pointer =
+		    hio_mgr->ul_gpp_va + (ul_gpp_cur_pointer -
+					  hio_mgr->ul_dsp_va);
+
+		/* No new debug messages available yet */
+		if (ul_gpp_cur_pointer == hio_mgr->ul_gpp_read_pointer) {
+			break;
+		} else if (ul_gpp_cur_pointer > hio_mgr->ul_gpp_read_pointer) {
+			/* Continuous data */
+			ul_new_message_length =
+			    ul_gpp_cur_pointer - hio_mgr->ul_gpp_read_pointer;
+
+			memcpy(hio_mgr->pmsg,
+			       (char *)hio_mgr->ul_gpp_read_pointer,
+			       ul_new_message_length);
+			hio_mgr->pmsg[ul_new_message_length] = '\0';
+			/*
+			 * Advance the GPP trace pointer to DSP current
+			 * pointer.
+			 */
+			hio_mgr->ul_gpp_read_pointer += ul_new_message_length;
+			/* Print the trace messages */
+			pr_info("DSPTrace: %s\n", hio_mgr->pmsg);
+		} else if (ul_gpp_cur_pointer < hio_mgr->ul_gpp_read_pointer) {
+			/* Handle trace buffer wraparound */
+			memcpy(hio_mgr->pmsg,
+			       (char *)hio_mgr->ul_gpp_read_pointer,
+			       hio_mgr->ul_trace_buffer_end -
+			       hio_mgr->ul_gpp_read_pointer);
+			ul_new_message_length =
+			    ul_gpp_cur_pointer - hio_mgr->ul_trace_buffer_begin;
+			memcpy(&hio_mgr->pmsg[hio_mgr->ul_trace_buffer_end -
+					      hio_mgr->ul_gpp_read_pointer],
+			       (char *)hio_mgr->ul_trace_buffer_begin,
+			       ul_new_message_length);
+			hio_mgr->pmsg[hio_mgr->ul_trace_buffer_end -
+				      hio_mgr->ul_gpp_read_pointer +
+				      ul_new_message_length] = '\0';
+			/*
+			 * Advance the GPP trace pointer to DSP current
+			 * pointer.
+			 */
+			hio_mgr->ul_gpp_read_pointer =
+			    hio_mgr->ul_trace_buffer_begin +
+			    ul_new_message_length;
+			/* Print the trace messages */
+			pr_info("DSPTrace: %s\n", hio_mgr->pmsg);
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/*
+ *  ======== print_dsp_trace_buffer ========
+ *      Prints the trace buffer returned from the DSP (if DBG_Trace is enabled).
+ *  Parameters:
+ *    hdeh_mgr:          Handle to DEH manager object
+ *                      number of extra carriage returns to generate.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Unable to allocate memory.
+ *  Requires:
+ *      hdeh_mgr muse be valid. Checked in bridge_deh_notify.
+ */
+int print_dsp_trace_buffer(struct bridge_dev_context *hbridge_context)
+{
+	int status = 0;
+	struct cod_manager *cod_mgr;
+	u32 ul_trace_end;
+	u32 ul_trace_begin;
+	u32 trace_cur_pos;
+	u32 ul_num_bytes = 0;
+	u32 ul_num_words = 0;
+	u32 ul_word_size = 2;
+	char *psz_buf;
+	char *str_beg;
+	char *trace_end;
+	char *buf_end;
+	char *new_line;
+
+	struct bridge_dev_context *pbridge_context = hbridge_context;
+	struct bridge_drv_interface *intf_fxns;
+	struct dev_object *dev_obj = (struct dev_object *)
+	    pbridge_context->hdev_obj;
+
+	status = dev_get_cod_mgr(dev_obj, &cod_mgr);
+
+	if (cod_mgr) {
+		/* Look for SYS_PUTCBEG/SYS_PUTCEND */
+		status =
+		    cod_get_sym_value(cod_mgr, COD_TRACEBEG, &ul_trace_begin);
+	} else {
+		status = -EFAULT;
+	}
+	if (!status)
+		status =
+		    cod_get_sym_value(cod_mgr, COD_TRACEEND, &ul_trace_end);
+
+	if (!status)
+		/* trace_cur_pos will hold the address of a DSP pointer */
+		status = cod_get_sym_value(cod_mgr, COD_TRACECURPOS,
+							&trace_cur_pos);
+
+	if (status)
+		goto func_end;
+
+	ul_num_bytes = (ul_trace_end - ul_trace_begin);
+
+	ul_num_words = ul_num_bytes * ul_word_size;
+	status = dev_get_intf_fxns(dev_obj, &intf_fxns);
+
+	if (status)
+		goto func_end;
+
+	psz_buf = kzalloc(ul_num_bytes + 2, GFP_ATOMIC);
+	if (psz_buf != NULL) {
+		/* Read trace buffer data */
+		status = (*intf_fxns->pfn_brd_read)(pbridge_context,
+			(u8 *)psz_buf, (u32)ul_trace_begin,
+			ul_num_bytes, 0);
+
+		if (status)
+			goto func_end;
+
+		/* Pack and do newline conversion */
+		pr_debug("PrintDspTraceBuffer: "
+			"before pack and unpack.\n");
+		pr_debug("%s: DSP Trace Buffer Begin:\n"
+			"=======================\n%s\n",
+			__func__, psz_buf);
+
+		/* Read the value at the DSP address in trace_cur_pos. */
+		status = (*intf_fxns->pfn_brd_read)(pbridge_context,
+				(u8 *)&trace_cur_pos, (u32)trace_cur_pos,
+				4, 0);
+		if (status)
+			goto func_end;
+		/* Pack and do newline conversion */
+		pr_info("DSP Trace Buffer Begin:\n"
+			"=======================\n%s\n",
+			psz_buf);
+
+
+		/* convert to offset */
+		trace_cur_pos = trace_cur_pos - ul_trace_begin;
+
+		if (ul_num_bytes) {
+			/*
+			 * The buffer is not full, find the end of the
+			 * data -- buf_end will be >= pszBuf after
+			 * while.
+			 */
+			buf_end = &psz_buf[ul_num_bytes+1];
+			/* DSP print position */
+			trace_end = &psz_buf[trace_cur_pos];
+
+			/*
+			 * Search buffer for a new_line and replace it
+			 * with '\0', then print as string.
+			 * Continue until end of buffer is reached.
+			 */
+			str_beg = trace_end;
+			ul_num_bytes = buf_end - str_beg;
+
+			while (str_beg < buf_end) {
+				new_line = strnchr(str_beg, ul_num_bytes,
+								'\n');
+				if (new_line && new_line < buf_end) {
+					*new_line = 0;
+					pr_debug("%s\n", str_beg);
+					str_beg = ++new_line;
+					ul_num_bytes = buf_end - str_beg;
+				} else {
+					/*
+					 * Assume buffer empty if it contains
+					 * a zero
+					 */
+					if (*str_beg != '\0') {
+						str_beg[ul_num_bytes] = 0;
+						pr_debug("%s\n", str_beg);
+					}
+					str_beg = buf_end;
+					ul_num_bytes = 0;
+				}
+			}
+			/*
+			 * Search buffer for a nNewLine and replace it
+			 * with '\0', then print as string.
+			 * Continue until buffer is exhausted.
+			 */
+			str_beg = psz_buf;
+			ul_num_bytes = trace_end - str_beg;
+
+			while (str_beg < trace_end) {
+				new_line = strnchr(str_beg, ul_num_bytes, '\n');
+				if (new_line != NULL && new_line < trace_end) {
+					*new_line = 0;
+					pr_debug("%s\n", str_beg);
+					str_beg = ++new_line;
+					ul_num_bytes = trace_end - str_beg;
+				} else {
+					/*
+					 * Assume buffer empty if it contains
+					 * a zero
+					 */
+					if (*str_beg != '\0') {
+						str_beg[ul_num_bytes] = 0;
+						pr_debug("%s\n", str_beg);
+					}
+					str_beg = trace_end;
+					ul_num_bytes = 0;
+				}
+			}
+		}
+		pr_info("\n=======================\n"
+			"DSP Trace Buffer End:\n");
+		kfree(psz_buf);
+	} else {
+		status = -ENOMEM;
+	}
+func_end:
+	if (status)
+		dev_dbg(bridge, "%s Failed, status 0x%x\n", __func__, status);
+	return status;
+}
+
+/**
+ * dump_dsp_stack() - This function dumps the data on the DSP stack.
+ * @bridge_context:	Bridge driver's device context pointer.
+ *
+ */
+int dump_dsp_stack(struct bridge_dev_context *bridge_context)
+{
+	int status = 0;
+	struct cod_manager *code_mgr;
+	struct node_mgr *node_mgr;
+	u32 trace_begin;
+	char name[256];
+	struct {
+		u32 head[2];
+		u32 size;
+	} mmu_fault_dbg_info;
+	u32 *buffer;
+	u32 *buffer_beg;
+	u32 *buffer_end;
+	u32 exc_type;
+	u32 dyn_ext_base;
+	u32 i;
+	u32 offset_output;
+	u32 total_size;
+	u32 poll_cnt;
+	const char *dsp_regs[] = {"EFR", "IERR", "ITSR", "NTSR",
+				"IRP", "NRP", "AMR", "SSR",
+				"ILC", "RILC", "IER", "CSR"};
+	const char *exec_ctxt[] = {"Task", "SWI", "HWI", "Unknown"};
+	struct bridge_drv_interface *intf_fxns;
+	struct dev_object *dev_object = bridge_context->hdev_obj;
+
+	status = dev_get_cod_mgr(dev_object, &code_mgr);
+	if (!code_mgr) {
+		pr_debug("%s: Failed on dev_get_cod_mgr.\n", __func__);
+		status = -EFAULT;
+	}
+
+	if (!status) {
+		status = dev_get_node_manager(dev_object, &node_mgr);
+		if (!node_mgr) {
+			pr_debug("%s: Failed on dev_get_node_manager.\n",
+								__func__);
+			status = -EFAULT;
+		}
+	}
+
+	if (!status) {
+		/* Look for SYS_PUTCBEG/SYS_PUTCEND: */
+		status =
+			cod_get_sym_value(code_mgr, COD_TRACEBEG, &trace_begin);
+		pr_debug("%s: trace_begin Value 0x%x\n",
+			__func__, trace_begin);
+		if (status)
+			pr_debug("%s: Failed on cod_get_sym_value.\n",
+								__func__);
+	}
+	if (!status)
+		status = dev_get_intf_fxns(dev_object, &intf_fxns);
+	/*
+	 * Check for the "magic number" in the trace buffer.  If it has
+	 * yet to appear then poll the trace buffer to wait for it.  Its
+	 * appearance signals that the DSP has finished dumping its state.
+	 */
+	mmu_fault_dbg_info.head[0] = 0;
+	mmu_fault_dbg_info.head[1] = 0;
+	if (!status) {
+		poll_cnt = 0;
+		while ((mmu_fault_dbg_info.head[0] != MMU_FAULT_HEAD1 ||
+			mmu_fault_dbg_info.head[1] != MMU_FAULT_HEAD2) &&
+			poll_cnt < POLL_MAX) {
+
+			/* Read DSP dump size from the DSP trace buffer... */
+			status = (*intf_fxns->pfn_brd_read)(bridge_context,
+				(u8 *)&mmu_fault_dbg_info, (u32)trace_begin,
+				sizeof(mmu_fault_dbg_info), 0);
+
+			if (status)
+				break;
+
+			poll_cnt++;
+		}
+
+		if (mmu_fault_dbg_info.head[0] != MMU_FAULT_HEAD1 &&
+			mmu_fault_dbg_info.head[1] != MMU_FAULT_HEAD2) {
+			status = -ETIME;
+			pr_err("%s:No DSP MMU-Fault information available.\n",
+							__func__);
+		}
+	}
+
+	if (!status) {
+		total_size = mmu_fault_dbg_info.size;
+		/* Limit the size in case DSP went crazy */
+		if (total_size > MAX_MMU_DBGBUFF)
+			total_size = MAX_MMU_DBGBUFF;
+
+		buffer = kzalloc(total_size, GFP_ATOMIC);
+		if (!buffer) {
+			status = -ENOMEM;
+			pr_debug("%s: Failed to "
+				"allocate stack dump buffer.\n", __func__);
+			goto func_end;
+		}
+
+		buffer_beg = buffer;
+		buffer_end =  buffer + total_size / 4;
+
+		/* Read bytes from the DSP trace buffer... */
+		status = (*intf_fxns->pfn_brd_read)(bridge_context,
+				(u8 *)buffer, (u32)trace_begin,
+				total_size, 0);
+		if (status) {
+			pr_debug("%s: Failed to Read Trace Buffer.\n",
+								__func__);
+			goto func_end;
+		}
+
+		pr_err("\nAproximate Crash Position:\n"
+			"--------------------------\n");
+
+		exc_type = buffer[3];
+		if (!exc_type)
+			i = buffer[79];         /* IRP */
+		else
+			i = buffer[80];         /* NRP */
+
+		status =
+		    cod_get_sym_value(code_mgr, DYNEXTBASE, &dyn_ext_base);
+		if (status) {
+			status = -EFAULT;
+			goto func_end;
+		}
+
+		if ((i > dyn_ext_base) && (node_find_addr(node_mgr, i,
+			0x1000, &offset_output, name) == 0))
+			pr_err("0x%-8x [\"%s\" + 0x%x]\n", i, name,
+							i - offset_output);
+		else
+			pr_err("0x%-8x [Unable to match to a symbol.]\n", i);
+
+		buffer += 4;
+
+		pr_err("\nExecution Info:\n"
+			"---------------\n");
+
+		if (*buffer < ARRAY_SIZE(exec_ctxt)) {
+			pr_err("Execution context \t%s\n",
+				exec_ctxt[*buffer++]);
+		} else {
+			pr_err("Execution context corrupt\n");
+			kfree(buffer_beg);
+			return -EFAULT;
+		}
+		pr_err("Task Handle\t\t0x%x\n", *buffer++);
+		pr_err("Stack Pointer\t\t0x%x\n", *buffer++);
+		pr_err("Stack Top\t\t0x%x\n", *buffer++);
+		pr_err("Stack Bottom\t\t0x%x\n", *buffer++);
+		pr_err("Stack Size\t\t0x%x\n", *buffer++);
+		pr_err("Stack Size In Use\t0x%x\n", *buffer++);
+
+		pr_err("\nCPU Registers\n"
+			"---------------\n");
+
+		for (i = 0; i < 32; i++) {
+			if (i == 4 || i == 6 || i == 8)
+				pr_err("A%d 0x%-8x [Function Argument %d]\n",
+							i, *buffer++, i-3);
+			else if (i == 15)
+				pr_err("A15 0x%-8x [Frame Pointer]\n",
+								*buffer++);
+			else
+				pr_err("A%d 0x%x\n", i, *buffer++);
+		}
+
+		pr_err("\nB0 0x%x\n", *buffer++);
+		pr_err("B1 0x%x\n", *buffer++);
+		pr_err("B2 0x%x\n", *buffer++);
+
+		if ((*buffer > dyn_ext_base) && (node_find_addr(node_mgr,
+			*buffer, 0x1000, &offset_output, name) == 0))
+
+			pr_err("B3 0x%-8x [Function Return Pointer:"
+				" \"%s\" + 0x%x]\n", *buffer, name,
+				*buffer - offset_output);
+		else
+			pr_err("B3 0x%-8x [Function Return Pointer:"
+				"Unable to match to a symbol.]\n", *buffer);
+
+		buffer++;
+
+		for (i = 4; i < 32; i++) {
+			if (i == 4 || i == 6 || i == 8)
+				pr_err("B%d 0x%-8x [Function Argument %d]\n",
+							i, *buffer++, i-2);
+			else if (i == 14)
+				pr_err("B14 0x%-8x [Data Page Pointer]\n",
+								*buffer++);
+			else
+				pr_err("B%d 0x%x\n", i, *buffer++);
+		}
+
+		pr_err("\n");
+
+		for (i = 0; i < ARRAY_SIZE(dsp_regs); i++)
+			pr_err("%s 0x%x\n", dsp_regs[i], *buffer++);
+
+		pr_err("\nStack:\n"
+			"------\n");
+
+		for (i = 0; buffer < buffer_end; i++, buffer++) {
+			if ((*buffer > dyn_ext_base) && (
+				node_find_addr(node_mgr, *buffer , 0x600,
+				&offset_output, name) == 0))
+				pr_err("[%d] 0x%-8x [\"%s\" + 0x%x]\n",
+					i, *buffer, name,
+					*buffer - offset_output);
+			else
+				pr_err("[%d] 0x%x\n", i, *buffer);
+		}
+		kfree(buffer_beg);
+	}
+func_end:
+	return status;
+}
+
+/**
+ * dump_dl_modules() - This functions dumps the _DLModules loaded in DSP side
+ * @bridge_context:		Bridge driver's device context pointer.
+ *
+ */
+void dump_dl_modules(struct bridge_dev_context *bridge_context)
+{
+	struct cod_manager *code_mgr;
+	struct bridge_drv_interface *intf_fxns;
+	struct bridge_dev_context *bridge_ctxt = bridge_context;
+	struct dev_object *dev_object = bridge_ctxt->hdev_obj;
+	struct modules_header modules_hdr;
+	struct dll_module *module_struct = NULL;
+	u32 module_dsp_addr;
+	u32 module_size;
+	u32 module_struct_size = 0;
+	u32 sect_ndx;
+	char *sect_str ;
+	int status = 0;
+
+	status = dev_get_intf_fxns(dev_object, &intf_fxns);
+	if (status) {
+		pr_debug("%s: Failed on dev_get_intf_fxns.\n", __func__);
+		goto func_end;
+	}
+
+	status = dev_get_cod_mgr(dev_object, &code_mgr);
+	if (!code_mgr) {
+		pr_debug("%s: Failed on dev_get_cod_mgr.\n", __func__);
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	/* Lookup  the address of the modules_header structure */
+	status = cod_get_sym_value(code_mgr, "_DLModules", &module_dsp_addr);
+	if (status) {
+		pr_debug("%s: Failed on cod_get_sym_value for _DLModules.\n",
+			__func__);
+		goto func_end;
+	}
+
+	pr_debug("%s: _DLModules at 0x%x\n", __func__, module_dsp_addr);
+
+	/* Copy the modules_header structure from DSP memory. */
+	status = (*intf_fxns->pfn_brd_read)(bridge_context, (u8 *) &modules_hdr,
+				(u32) module_dsp_addr, sizeof(modules_hdr), 0);
+
+	if (status) {
+		pr_debug("%s: Failed failed to read modules header.\n",
+								__func__);
+		goto func_end;
+	}
+
+	module_dsp_addr = modules_hdr.first_module;
+	module_size = modules_hdr.first_module_size;
+
+	pr_debug("%s: dll_module_header 0x%x %d\n", __func__, module_dsp_addr,
+								module_size);
+
+	pr_err("\nDynamically Loaded Modules:\n"
+		"---------------------------\n");
+
+	/* For each dll_module structure in the list... */
+	while (module_size) {
+		/*
+		 * Allocate/re-allocate memory to hold the dll_module
+		 * structure. The memory is re-allocated only if the existing
+		 * allocation is too small.
+		 */
+		if (module_size > module_struct_size) {
+			kfree(module_struct);
+			module_struct = kzalloc(module_size+128, GFP_ATOMIC);
+			module_struct_size = module_size+128;
+			pr_debug("%s: allocated module struct %p %d\n",
+				__func__, module_struct, module_struct_size);
+			if (!module_struct)
+				goto func_end;
+		}
+		/* Copy the dll_module structure from DSP memory */
+		status = (*intf_fxns->pfn_brd_read)(bridge_context,
+			(u8 *)module_struct, module_dsp_addr, module_size, 0);
+
+		if (status) {
+			pr_debug(
+			"%s: Failed to read dll_module stuct for 0x%x.\n",
+			__func__, module_dsp_addr);
+			break;
+		}
+
+		/* Update info regarding the _next_ module in the list. */
+		module_dsp_addr = module_struct->next_module;
+		module_size = module_struct->next_module_size;
+
+		pr_debug("%s: next module 0x%x %d, this module num sects %d\n",
+			__func__, module_dsp_addr, module_size,
+			module_struct->num_sects);
+
+		/*
+		 * The section name strings start immedialty following
+		 * the array of dll_sect structures.
+		 */
+		sect_str = (char *) &module_struct->
+					sects[module_struct->num_sects];
+		pr_err("%s\n", sect_str);
+
+		/*
+		 * Advance to the first section name string.
+		 * Each string follows the one before.
+		 */
+		sect_str += strlen(sect_str) + 1;
+
+		/* Access each dll_sect structure and its name string. */
+		for (sect_ndx = 0;
+			sect_ndx < module_struct->num_sects; sect_ndx++) {
+			pr_err("    Section: 0x%x ",
+				module_struct->sects[sect_ndx].sect_load_adr);
+
+			if (((u32) sect_str - (u32) module_struct) <
+				module_struct_size) {
+				pr_err("%s\n", sect_str);
+				/* Each string follows the one before. */
+				sect_str += strlen(sect_str)+1;
+			} else {
+				pr_err("<string error>\n");
+				pr_debug("%s: section name sting address "
+					"is invalid %p\n", __func__, sect_str);
+			}
+		}
+	}
+func_end:
+	kfree(module_struct);
+}
+#endif
diff --git a/drivers/staging/tidspbridge/core/msg_sm.c b/drivers/staging/tidspbridge/core/msg_sm.c
new file mode 100644
index 00000000000..87712e24dfb
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/msg_sm.c
@@ -0,0 +1,673 @@
+/*
+ * msg_sm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implements upper edge functions for Bridge message module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/list.h>
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/io_sm.h>
+
+/*  ----------------------------------- This */
+#include <_msg_sm.h>
+#include <dspbridge/dspmsg.h>
+
+/*  ----------------------------------- Function Prototypes */
+static int add_new_msg(struct lst_list *msg_list);
+static void delete_msg_mgr(struct msg_mgr *hmsg_mgr);
+static void delete_msg_queue(struct msg_queue *msg_queue_obj, u32 num_to_dsp);
+static void free_msg_list(struct lst_list *msg_list);
+
+/*
+ *  ======== bridge_msg_create ========
+ *      Create an object to manage message queues. Only one of these objects
+ *      can exist per device object.
+ */
+int bridge_msg_create(struct msg_mgr **msg_man,
+			     struct dev_object *hdev_obj,
+			     msg_onexit msg_callback)
+{
+	struct msg_mgr *msg_mgr_obj;
+	struct io_mgr *hio_mgr;
+	int status = 0;
+
+	if (!msg_man || !msg_callback || !hdev_obj) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	dev_get_io_mgr(hdev_obj, &hio_mgr);
+	if (!hio_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	*msg_man = NULL;
+	/* Allocate msg_ctrl manager object */
+	msg_mgr_obj = kzalloc(sizeof(struct msg_mgr), GFP_KERNEL);
+
+	if (msg_mgr_obj) {
+		msg_mgr_obj->on_exit = msg_callback;
+		msg_mgr_obj->hio_mgr = hio_mgr;
+		/* List of MSG_QUEUEs */
+		msg_mgr_obj->queue_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		/*  Queues of message frames for messages to the DSP. Message
+		 * frames will only be added to the free queue when a
+		 * msg_queue object is created. */
+		msg_mgr_obj->msg_free_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		msg_mgr_obj->msg_used_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		if (msg_mgr_obj->queue_list == NULL ||
+		    msg_mgr_obj->msg_free_list == NULL ||
+		    msg_mgr_obj->msg_used_list == NULL) {
+			status = -ENOMEM;
+		} else {
+			INIT_LIST_HEAD(&msg_mgr_obj->queue_list->head);
+			INIT_LIST_HEAD(&msg_mgr_obj->msg_free_list->head);
+			INIT_LIST_HEAD(&msg_mgr_obj->msg_used_list->head);
+			spin_lock_init(&msg_mgr_obj->msg_mgr_lock);
+		}
+
+		/*  Create an event to be used by bridge_msg_put() in waiting
+		 *  for an available free frame from the message manager. */
+		msg_mgr_obj->sync_event =
+				kzalloc(sizeof(struct sync_object), GFP_KERNEL);
+		if (!msg_mgr_obj->sync_event)
+			status = -ENOMEM;
+		else
+			sync_init_event(msg_mgr_obj->sync_event);
+
+		if (!status)
+			*msg_man = msg_mgr_obj;
+		else
+			delete_msg_mgr(msg_mgr_obj);
+
+	} else {
+		status = -ENOMEM;
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_msg_create_queue ========
+ *      Create a msg_queue for sending/receiving messages to/from a node
+ *      on the DSP.
+ */
+int bridge_msg_create_queue(struct msg_mgr *hmsg_mgr,
+				struct msg_queue **msgq,
+				u32 msgq_id, u32 max_msgs, void *arg)
+{
+	u32 i;
+	u32 num_allocated = 0;
+	struct msg_queue *msg_q;
+	int status = 0;
+
+	if (!hmsg_mgr || msgq == NULL || !hmsg_mgr->msg_free_list) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	*msgq = NULL;
+	/* Allocate msg_queue object */
+	msg_q = kzalloc(sizeof(struct msg_queue), GFP_KERNEL);
+	if (!msg_q) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	lst_init_elem((struct list_head *)msg_q);
+	msg_q->max_msgs = max_msgs;
+	msg_q->hmsg_mgr = hmsg_mgr;
+	msg_q->arg = arg;	/* Node handle */
+	msg_q->msgq_id = msgq_id;	/* Node env (not valid yet) */
+	/* Queues of Message frames for messages from the DSP */
+	msg_q->msg_free_list = kzalloc(sizeof(struct lst_list), GFP_KERNEL);
+	msg_q->msg_used_list = kzalloc(sizeof(struct lst_list), GFP_KERNEL);
+	if (msg_q->msg_free_list == NULL || msg_q->msg_used_list == NULL)
+		status = -ENOMEM;
+	else {
+		INIT_LIST_HEAD(&msg_q->msg_free_list->head);
+		INIT_LIST_HEAD(&msg_q->msg_used_list->head);
+	}
+
+	/*  Create event that will be signalled when a message from
+	 *  the DSP is available. */
+	if (!status) {
+		msg_q->sync_event = kzalloc(sizeof(struct sync_object),
+							GFP_KERNEL);
+		if (msg_q->sync_event)
+			sync_init_event(msg_q->sync_event);
+		else
+			status = -ENOMEM;
+	}
+
+	/* Create a notification list for message ready notification. */
+	if (!status) {
+		msg_q->ntfy_obj = kmalloc(sizeof(struct ntfy_object),
+							GFP_KERNEL);
+		if (msg_q->ntfy_obj)
+			ntfy_init(msg_q->ntfy_obj);
+		else
+			status = -ENOMEM;
+	}
+
+	/*  Create events that will be used to synchronize cleanup
+	 *  when the object is deleted. sync_done will be set to
+	 *  unblock threads in MSG_Put() or MSG_Get(). sync_done_ack
+	 *  will be set by the unblocked thread to signal that it
+	 *  is unblocked and will no longer reference the object. */
+	if (!status) {
+		msg_q->sync_done = kzalloc(sizeof(struct sync_object),
+							GFP_KERNEL);
+		if (msg_q->sync_done)
+			sync_init_event(msg_q->sync_done);
+		else
+			status = -ENOMEM;
+	}
+
+	if (!status) {
+		msg_q->sync_done_ack = kzalloc(sizeof(struct sync_object),
+							GFP_KERNEL);
+		if (msg_q->sync_done_ack)
+			sync_init_event(msg_q->sync_done_ack);
+		else
+			status = -ENOMEM;
+	}
+
+	if (!status) {
+		/* Enter critical section */
+		spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+		/* Initialize message frames and put in appropriate queues */
+		for (i = 0; i < max_msgs && !status; i++) {
+			status = add_new_msg(hmsg_mgr->msg_free_list);
+			if (!status) {
+				num_allocated++;
+				status = add_new_msg(msg_q->msg_free_list);
+			}
+		}
+		if (status) {
+			/*  Stay inside CS to prevent others from taking any
+			 *  of the newly allocated message frames. */
+			delete_msg_queue(msg_q, num_allocated);
+		} else {
+			lst_put_tail(hmsg_mgr->queue_list,
+				     (struct list_head *)msg_q);
+			*msgq = msg_q;
+			/* Signal that free frames are now available */
+			if (!LST_IS_EMPTY(hmsg_mgr->msg_free_list))
+				sync_set_event(hmsg_mgr->sync_event);
+
+		}
+		/* Exit critical section */
+		spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+	} else {
+		delete_msg_queue(msg_q, 0);
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_msg_delete ========
+ *      Delete a msg_ctrl manager allocated in bridge_msg_create().
+ */
+void bridge_msg_delete(struct msg_mgr *hmsg_mgr)
+{
+	if (hmsg_mgr)
+		delete_msg_mgr(hmsg_mgr);
+}
+
+/*
+ *  ======== bridge_msg_delete_queue ========
+ *      Delete a msg_ctrl queue allocated in bridge_msg_create_queue.
+ */
+void bridge_msg_delete_queue(struct msg_queue *msg_queue_obj)
+{
+	struct msg_mgr *hmsg_mgr;
+	u32 io_msg_pend;
+
+	if (!msg_queue_obj || !msg_queue_obj->hmsg_mgr)
+		goto func_end;
+
+	hmsg_mgr = msg_queue_obj->hmsg_mgr;
+	msg_queue_obj->done = true;
+	/*  Unblock all threads blocked in MSG_Get() or MSG_Put(). */
+	io_msg_pend = msg_queue_obj->io_msg_pend;
+	while (io_msg_pend) {
+		/* Unblock thread */
+		sync_set_event(msg_queue_obj->sync_done);
+		/* Wait for acknowledgement */
+		sync_wait_on_event(msg_queue_obj->sync_done_ack, SYNC_INFINITE);
+		io_msg_pend = msg_queue_obj->io_msg_pend;
+	}
+	/* Remove message queue from hmsg_mgr->queue_list */
+	spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+	lst_remove_elem(hmsg_mgr->queue_list,
+			(struct list_head *)msg_queue_obj);
+	/* Free the message queue object */
+	delete_msg_queue(msg_queue_obj, msg_queue_obj->max_msgs);
+	if (!hmsg_mgr->msg_free_list)
+		goto func_cont;
+	if (LST_IS_EMPTY(hmsg_mgr->msg_free_list))
+		sync_reset_event(hmsg_mgr->sync_event);
+func_cont:
+	spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+func_end:
+	return;
+}
+
+/*
+ *  ======== bridge_msg_get ========
+ *      Get a message from a msg_ctrl queue.
+ */
+int bridge_msg_get(struct msg_queue *msg_queue_obj,
+			  struct dsp_msg *pmsg, u32 utimeout)
+{
+	struct msg_frame *msg_frame_obj;
+	struct msg_mgr *hmsg_mgr;
+	bool got_msg = false;
+	struct sync_object *syncs[2];
+	u32 index;
+	int status = 0;
+
+	if (!msg_queue_obj || pmsg == NULL) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	hmsg_mgr = msg_queue_obj->hmsg_mgr;
+	if (!msg_queue_obj->msg_used_list) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	/* Enter critical section */
+	spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+	/* If a message is already there, get it */
+	if (!LST_IS_EMPTY(msg_queue_obj->msg_used_list)) {
+		msg_frame_obj = (struct msg_frame *)
+		    lst_get_head(msg_queue_obj->msg_used_list);
+		if (msg_frame_obj != NULL) {
+			*pmsg = msg_frame_obj->msg_data.msg;
+			lst_put_tail(msg_queue_obj->msg_free_list,
+				     (struct list_head *)msg_frame_obj);
+			if (LST_IS_EMPTY(msg_queue_obj->msg_used_list))
+				sync_reset_event(msg_queue_obj->sync_event);
+
+			got_msg = true;
+		}
+	} else {
+		if (msg_queue_obj->done)
+			status = -EPERM;
+		else
+			msg_queue_obj->io_msg_pend++;
+
+	}
+	/* Exit critical section */
+	spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+	if (!status && !got_msg) {
+		/*  Wait til message is available, timeout, or done. We don't
+		 *  have to schedule the DPC, since the DSP will send messages
+		 *  when they are available. */
+		syncs[0] = msg_queue_obj->sync_event;
+		syncs[1] = msg_queue_obj->sync_done;
+		status = sync_wait_on_multiple_events(syncs, 2, utimeout,
+						      &index);
+		/* Enter critical section */
+		spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+		if (msg_queue_obj->done) {
+			msg_queue_obj->io_msg_pend--;
+			/* Exit critical section */
+			spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+			/*  Signal that we're not going to access msg_queue_obj
+			 *  anymore, so it can be deleted. */
+			(void)sync_set_event(msg_queue_obj->sync_done_ack);
+			status = -EPERM;
+		} else {
+			if (!status) {
+				DBC_ASSERT(!LST_IS_EMPTY
+					   (msg_queue_obj->msg_used_list));
+				/* Get msg from used list */
+				msg_frame_obj = (struct msg_frame *)
+				    lst_get_head(msg_queue_obj->msg_used_list);
+				/* Copy message into pmsg and put frame on the
+				 * free list */
+				if (msg_frame_obj != NULL) {
+					*pmsg = msg_frame_obj->msg_data.msg;
+					lst_put_tail
+					    (msg_queue_obj->msg_free_list,
+					     (struct list_head *)
+					     msg_frame_obj);
+				}
+			}
+			msg_queue_obj->io_msg_pend--;
+			/* Reset the event if there are still queued messages */
+			if (!LST_IS_EMPTY(msg_queue_obj->msg_used_list))
+				sync_set_event(msg_queue_obj->sync_event);
+
+			/* Exit critical section */
+			spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_msg_put ========
+ *      Put a message onto a msg_ctrl queue.
+ */
+int bridge_msg_put(struct msg_queue *msg_queue_obj,
+			  const struct dsp_msg *pmsg, u32 utimeout)
+{
+	struct msg_frame *msg_frame_obj;
+	struct msg_mgr *hmsg_mgr;
+	bool put_msg = false;
+	struct sync_object *syncs[2];
+	u32 index;
+	int status = 0;
+
+	if (!msg_queue_obj || !pmsg || !msg_queue_obj->hmsg_mgr) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	hmsg_mgr = msg_queue_obj->hmsg_mgr;
+	if (!hmsg_mgr->msg_free_list) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+
+	/* If a message frame is available, use it */
+	if (!LST_IS_EMPTY(hmsg_mgr->msg_free_list)) {
+		msg_frame_obj =
+		    (struct msg_frame *)lst_get_head(hmsg_mgr->msg_free_list);
+		if (msg_frame_obj != NULL) {
+			msg_frame_obj->msg_data.msg = *pmsg;
+			msg_frame_obj->msg_data.msgq_id =
+			    msg_queue_obj->msgq_id;
+			lst_put_tail(hmsg_mgr->msg_used_list,
+				     (struct list_head *)msg_frame_obj);
+			hmsg_mgr->msgs_pending++;
+			put_msg = true;
+		}
+		if (LST_IS_EMPTY(hmsg_mgr->msg_free_list))
+			sync_reset_event(hmsg_mgr->sync_event);
+
+		/* Release critical section before scheduling DPC */
+		spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+		/* Schedule a DPC, to do the actual data transfer: */
+		iosm_schedule(hmsg_mgr->hio_mgr);
+	} else {
+		if (msg_queue_obj->done)
+			status = -EPERM;
+		else
+			msg_queue_obj->io_msg_pend++;
+
+		spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+	}
+	if (!status && !put_msg) {
+		/* Wait til a free message frame is available, timeout,
+		 * or done */
+		syncs[0] = hmsg_mgr->sync_event;
+		syncs[1] = msg_queue_obj->sync_done;
+		status = sync_wait_on_multiple_events(syncs, 2, utimeout,
+						      &index);
+		if (status)
+			goto func_end;
+		/* Enter critical section */
+		spin_lock_bh(&hmsg_mgr->msg_mgr_lock);
+		if (msg_queue_obj->done) {
+			msg_queue_obj->io_msg_pend--;
+			/* Exit critical section */
+			spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+			/*  Signal that we're not going to access msg_queue_obj
+			 *  anymore, so it can be deleted. */
+			(void)sync_set_event(msg_queue_obj->sync_done_ack);
+			status = -EPERM;
+		} else {
+			if (LST_IS_EMPTY(hmsg_mgr->msg_free_list)) {
+				status = -EFAULT;
+				goto func_cont;
+			}
+			/* Get msg from free list */
+			msg_frame_obj = (struct msg_frame *)
+			    lst_get_head(hmsg_mgr->msg_free_list);
+			/*
+			 * Copy message into pmsg and put frame on the
+			 * used list.
+			 */
+			if (msg_frame_obj) {
+				msg_frame_obj->msg_data.msg = *pmsg;
+				msg_frame_obj->msg_data.msgq_id =
+				    msg_queue_obj->msgq_id;
+				lst_put_tail(hmsg_mgr->msg_used_list,
+					     (struct list_head *)msg_frame_obj);
+				hmsg_mgr->msgs_pending++;
+				/*
+				 * Schedule a DPC, to do the actual
+				 * data transfer.
+				 */
+				iosm_schedule(hmsg_mgr->hio_mgr);
+			}
+
+			msg_queue_obj->io_msg_pend--;
+			/* Reset event if there are still frames available */
+			if (!LST_IS_EMPTY(hmsg_mgr->msg_free_list))
+				sync_set_event(hmsg_mgr->sync_event);
+func_cont:
+			/* Exit critical section */
+			spin_unlock_bh(&hmsg_mgr->msg_mgr_lock);
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_msg_register_notify ========
+ */
+int bridge_msg_register_notify(struct msg_queue *msg_queue_obj,
+				   u32 event_mask, u32 notify_type,
+				   struct dsp_notification *hnotification)
+{
+	int status = 0;
+
+	if (!msg_queue_obj || !hnotification) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	if (!(event_mask == DSP_NODEMESSAGEREADY || event_mask == 0)) {
+		status = -EPERM;
+		goto func_end;
+	}
+
+	if (notify_type != DSP_SIGNALEVENT) {
+		status = -EBADR;
+		goto func_end;
+	}
+
+	if (event_mask)
+		status = ntfy_register(msg_queue_obj->ntfy_obj, hnotification,
+						event_mask, notify_type);
+	else
+		status = ntfy_unregister(msg_queue_obj->ntfy_obj,
+							hnotification);
+
+	if (status == -EINVAL) {
+		/*  Not registered. Ok, since we couldn't have known. Node
+		 *  notifications are split between node state change handled
+		 *  by NODE, and message ready handled by msg_ctrl. */
+		status = 0;
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_msg_set_queue_id ========
+ */
+void bridge_msg_set_queue_id(struct msg_queue *msg_queue_obj, u32 msgq_id)
+{
+	/*
+	 *  A message queue must be created when a node is allocated,
+	 *  so that node_register_notify() can be called before the node
+	 *  is created. Since we don't know the node environment until the
+	 *  node is created, we need this function to set msg_queue_obj->msgq_id
+	 *  to the node environment, after the node is created.
+	 */
+	if (msg_queue_obj)
+		msg_queue_obj->msgq_id = msgq_id;
+}
+
+/*
+ *  ======== add_new_msg ========
+ *      Must be called in message manager critical section.
+ */
+static int add_new_msg(struct lst_list *msg_list)
+{
+	struct msg_frame *pmsg;
+	int status = 0;
+
+	pmsg = kzalloc(sizeof(struct msg_frame), GFP_ATOMIC);
+	if (pmsg != NULL) {
+		lst_init_elem((struct list_head *)pmsg);
+		lst_put_tail(msg_list, (struct list_head *)pmsg);
+	} else {
+		status = -ENOMEM;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== delete_msg_mgr ========
+ */
+static void delete_msg_mgr(struct msg_mgr *hmsg_mgr)
+{
+	if (!hmsg_mgr)
+		goto func_end;
+
+	if (hmsg_mgr->queue_list) {
+		if (LST_IS_EMPTY(hmsg_mgr->queue_list)) {
+			kfree(hmsg_mgr->queue_list);
+			hmsg_mgr->queue_list = NULL;
+		}
+	}
+
+	if (hmsg_mgr->msg_free_list) {
+		free_msg_list(hmsg_mgr->msg_free_list);
+		hmsg_mgr->msg_free_list = NULL;
+	}
+
+	if (hmsg_mgr->msg_used_list) {
+		free_msg_list(hmsg_mgr->msg_used_list);
+		hmsg_mgr->msg_used_list = NULL;
+	}
+
+	kfree(hmsg_mgr->sync_event);
+
+	kfree(hmsg_mgr);
+func_end:
+	return;
+}
+
+/*
+ *  ======== delete_msg_queue ========
+ */
+static void delete_msg_queue(struct msg_queue *msg_queue_obj, u32 num_to_dsp)
+{
+	struct msg_mgr *hmsg_mgr;
+	struct msg_frame *pmsg;
+	u32 i;
+
+	if (!msg_queue_obj ||
+	    !msg_queue_obj->hmsg_mgr || !msg_queue_obj->hmsg_mgr->msg_free_list)
+		goto func_end;
+
+	hmsg_mgr = msg_queue_obj->hmsg_mgr;
+
+	/* Pull off num_to_dsp message frames from Msg manager and free */
+	for (i = 0; i < num_to_dsp; i++) {
+
+		if (!LST_IS_EMPTY(hmsg_mgr->msg_free_list)) {
+			pmsg = (struct msg_frame *)
+			    lst_get_head(hmsg_mgr->msg_free_list);
+			kfree(pmsg);
+		} else {
+			/* Cannot free all of the message frames */
+			break;
+		}
+	}
+
+	if (msg_queue_obj->msg_free_list) {
+		free_msg_list(msg_queue_obj->msg_free_list);
+		msg_queue_obj->msg_free_list = NULL;
+	}
+
+	if (msg_queue_obj->msg_used_list) {
+		free_msg_list(msg_queue_obj->msg_used_list);
+		msg_queue_obj->msg_used_list = NULL;
+	}
+
+	if (msg_queue_obj->ntfy_obj) {
+		ntfy_delete(msg_queue_obj->ntfy_obj);
+		kfree(msg_queue_obj->ntfy_obj);
+	}
+
+	kfree(msg_queue_obj->sync_event);
+	kfree(msg_queue_obj->sync_done);
+	kfree(msg_queue_obj->sync_done_ack);
+
+	kfree(msg_queue_obj);
+func_end:
+	return;
+
+}
+
+/*
+ *  ======== free_msg_list ========
+ */
+static void free_msg_list(struct lst_list *msg_list)
+{
+	struct msg_frame *pmsg;
+
+	if (!msg_list)
+		goto func_end;
+
+	while ((pmsg = (struct msg_frame *)lst_get_head(msg_list)) != NULL)
+		kfree(pmsg);
+
+	DBC_ASSERT(LST_IS_EMPTY(msg_list));
+
+	kfree(msg_list);
+func_end:
+	return;
+}
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
new file mode 100644
index 00000000000..f914829c70f
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -0,0 +1,1802 @@
+/*
+ * tiomap.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Processor Manager Driver for TI OMAP3430 EVM.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <plat/control.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/sync.h>
+
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
+/*  ----------------------------------- Link Driver */
+#include <dspbridge/dspdefs.h>
+#include <dspbridge/dspchnl.h>
+#include <dspbridge/dspdeh.h>
+#include <dspbridge/dspio.h>
+#include <dspbridge/dspmsg.h>
+#include <dspbridge/pwr.h>
+#include <dspbridge/io_sm.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/dspapi.h>
+#include <dspbridge/dmm.h>
+#include <dspbridge/wdt.h>
+
+/*  ----------------------------------- Local */
+#include "_tiomap.h"
+#include "_tiomap_pwr.h"
+#include "tiomap_io.h"
+
+/* Offset in shared mem to write to in order to synchronize start with DSP */
+#define SHMSYNCOFFSET 4		/* GPP byte offset */
+
+#define BUFFERSIZE 1024
+
+#define TIHELEN_ACKTIMEOUT  10000
+
+#define MMU_SECTION_ADDR_MASK    0xFFF00000
+#define MMU_SSECTION_ADDR_MASK   0xFF000000
+#define MMU_LARGE_PAGE_MASK      0xFFFF0000
+#define MMU_SMALL_PAGE_MASK      0xFFFFF000
+#define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
+#define PAGES_II_LVL_TABLE   512
+#define PHYS_TO_PAGE(phys)      pfn_to_page((phys) >> PAGE_SHIFT)
+
+/* Forward Declarations: */
+static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
+static int bridge_brd_read(struct bridge_dev_context *dev_ctxt,
+				  u8 *host_buff,
+				  u32 dsp_addr, u32 ul_num_bytes,
+				  u32 mem_type);
+static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
+				   u32 dsp_addr);
+static int bridge_brd_status(struct bridge_dev_context *dev_ctxt,
+				    int *board_state);
+static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt);
+static int bridge_brd_write(struct bridge_dev_context *dev_ctxt,
+				   u8 *host_buff,
+				   u32 dsp_addr, u32 ul_num_bytes,
+				   u32 mem_type);
+static int bridge_brd_set_state(struct bridge_dev_context *dev_ctxt,
+				    u32 brd_state);
+static int bridge_brd_mem_copy(struct bridge_dev_context *dev_ctxt,
+				   u32 dsp_dest_addr, u32 dsp_src_addr,
+				   u32 ul_num_bytes, u32 mem_type);
+static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
+				    u8 *host_buff, u32 dsp_addr,
+				    u32 ul_num_bytes, u32 mem_type);
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages);
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 virt_addr, u32 ul_num_bytes);
+static int bridge_dev_create(struct bridge_dev_context
+					**dev_cntxt,
+					struct dev_object *hdev_obj,
+					struct cfg_hostres *config_param);
+static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
+				  u32 dw_cmd, void *pargs);
+static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
+static u32 user_va2_pa(struct mm_struct *mm, u32 address);
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs);
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs);
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs);
+
+bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
+
+/*  ----------------------------------- Globals */
+
+/* Attributes of L2 page tables for DSP MMU */
+struct page_info {
+	u32 num_entries;	/* Number of valid PTEs in the L2 PT */
+};
+
+/* Attributes used to manage the DSP MMU page tables */
+struct pg_table_attrs {
+	spinlock_t pg_lock;	/* Critical section object handle */
+
+	u32 l1_base_pa;		/* Physical address of the L1 PT */
+	u32 l1_base_va;		/* Virtual  address of the L1 PT */
+	u32 l1_size;		/* Size of the L1 PT */
+	u32 l1_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L1 table.
+	 * May not be aligned */
+
+	u32 l2_base_pa;		/* Physical address of the L2 PT */
+	u32 l2_base_va;		/* Virtual  address of the L2 PT */
+	u32 l2_size;		/* Size of the L2 PT */
+	u32 l2_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L2 table.
+	 * May not be aligned */
+
+	u32 l2_num_pages;	/* Number of allocated L2 PT */
+	/* Array [l2_num_pages] of L2 PT info structs */
+	struct page_info *pg_info;
+};
+
+/*
+ *  This Bridge driver's function interface table.
+ */
+static struct bridge_drv_interface drv_interface_fxns = {
+	/* Bridge API ver. for which this bridge driver is built. */
+	BRD_API_MAJOR_VERSION,
+	BRD_API_MINOR_VERSION,
+	bridge_dev_create,
+	bridge_dev_destroy,
+	bridge_dev_ctrl,
+	bridge_brd_monitor,
+	bridge_brd_start,
+	bridge_brd_stop,
+	bridge_brd_status,
+	bridge_brd_read,
+	bridge_brd_write,
+	bridge_brd_set_state,
+	bridge_brd_mem_copy,
+	bridge_brd_mem_write,
+	bridge_brd_mem_map,
+	bridge_brd_mem_un_map,
+	/* The following CHNL functions are provided by chnl_io.lib: */
+	bridge_chnl_create,
+	bridge_chnl_destroy,
+	bridge_chnl_open,
+	bridge_chnl_close,
+	bridge_chnl_add_io_req,
+	bridge_chnl_get_ioc,
+	bridge_chnl_cancel_io,
+	bridge_chnl_flush_io,
+	bridge_chnl_get_info,
+	bridge_chnl_get_mgr_info,
+	bridge_chnl_idle,
+	bridge_chnl_register_notify,
+	/* The following IO functions are provided by chnl_io.lib: */
+	bridge_io_create,
+	bridge_io_destroy,
+	bridge_io_on_loaded,
+	bridge_io_get_proc_load,
+	/* The following msg_ctrl functions are provided by chnl_io.lib: */
+	bridge_msg_create,
+	bridge_msg_create_queue,
+	bridge_msg_delete,
+	bridge_msg_delete_queue,
+	bridge_msg_get,
+	bridge_msg_put,
+	bridge_msg_register_notify,
+	bridge_msg_set_queue_id,
+};
+
+static inline void flush_all(struct bridge_dev_context *dev_context)
+{
+	if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION ||
+	    dev_context->dw_brd_state == BRD_HIBERNATION)
+		wake_dsp(dev_context, NULL);
+
+	hw_mmu_tlb_flush_all(dev_context->dw_dsp_mmu_base);
+}
+
+static void bad_page_dump(u32 pa, struct page *pg)
+{
+	pr_emerg("DSPBRIDGE: MAP function: COUNT 0 FOR PA 0x%x\n", pa);
+	pr_emerg("Bad page state in process '%s'\n"
+		 "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
+		 "Backtrace:\n",
+		 current->comm, pg, (int)(2 * sizeof(unsigned long)),
+		 (unsigned long)pg->flags, pg->mapping,
+		 page_mapcount(pg), page_count(pg));
+	dump_stack();
+}
+
+/*
+ *  ======== bridge_drv_entry ========
+ *  purpose:
+ *      Bridge Driver entry point.
+ */
+void bridge_drv_entry(struct bridge_drv_interface **drv_intf,
+		   const char *driver_file_name)
+{
+
+	DBC_REQUIRE(driver_file_name != NULL);
+
+	io_sm_init();		/* Initialization of io_sm module */
+
+	if (strcmp(driver_file_name, "UMA") == 0)
+		*drv_intf = &drv_interface_fxns;
+	else
+		dev_dbg(bridge, "%s Unknown Bridge file name", __func__);
+
+}
+
+/*
+ *  ======== bridge_brd_monitor ========
+ *  purpose:
+ *      This bridge_brd_monitor puts DSP into a Loadable state.
+ *      i.e Application can load and start the device.
+ *
+ *  Preconditions:
+ *      Device in 'OFF' state.
+ */
+static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt)
+{
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	u32 temp;
+	struct dspbridge_platform_data *pdata =
+				    omap_dspbridge_dev->dev.platform_data;
+
+	temp = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
+					OMAP_POWERSTATEST_MASK;
+	if (!(temp & 0x02)) {
+		/* IVA2 is not in ON state */
+		/* Read and set PM_PWSTCTRL_IVA2  to ON */
+		(*pdata->dsp_prm_rmw_bits)(OMAP_POWERSTATEST_MASK,
+			PWRDM_POWER_ON, OMAP3430_IVA2_MOD, OMAP2_PM_PWSTCTRL);
+		/* Set the SW supervised state transition */
+		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP,
+					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
+
+		/* Wait until the state has moved to ON */
+		while ((*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
+						OMAP_INTRANSITION_MASK)
+			;
+		/* Disable Automatic transition */
+		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_DISABLE_AUTO,
+					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
+	}
+	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+	dsp_clk_enable(DSP_CLK_IVA2);
+
+	/* set the device state to IDLE */
+	dev_context->dw_brd_state = BRD_IDLE;
+
+	return 0;
+}
+
+/*
+ *  ======== bridge_brd_read ========
+ *  purpose:
+ *      Reads buffers for DSP memory.
+ */
+static int bridge_brd_read(struct bridge_dev_context *dev_ctxt,
+				  u8 *host_buff, u32 dsp_addr,
+				  u32 ul_num_bytes, u32 mem_type)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	u32 offset;
+	u32 dsp_base_addr = dev_ctxt->dw_dsp_base_addr;
+
+	if (dsp_addr < dev_context->dw_dsp_start_add) {
+		status = -EPERM;
+		return status;
+	}
+	/* change here to account for the 3 bands of the DSP internal memory */
+	if ((dsp_addr - dev_context->dw_dsp_start_add) <
+	    dev_context->dw_internal_size) {
+		offset = dsp_addr - dev_context->dw_dsp_start_add;
+	} else {
+		status = read_ext_dsp_data(dev_context, host_buff, dsp_addr,
+					   ul_num_bytes, mem_type);
+		return status;
+	}
+	/* copy the data from  DSP memory, */
+	memcpy(host_buff, (void *)(dsp_base_addr + offset), ul_num_bytes);
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_set_state ========
+ *  purpose:
+ *      This routine updates the Board status.
+ */
+static int bridge_brd_set_state(struct bridge_dev_context *dev_ctxt,
+				    u32 brd_state)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+
+	dev_context->dw_brd_state = brd_state;
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_start ========
+ *  purpose:
+ *      Initializes DSP MMU and Starts DSP.
+ *
+ *  Preconditions:
+ *  a) DSP domain is 'ACTIVE'.
+ *  b) DSP_RST1 is asserted.
+ *  b) DSP_RST2 is released.
+ */
+static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
+				   u32 dsp_addr)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	u32 dw_sync_addr = 0;
+	u32 ul_shm_base;	/* Gpp Phys SM base addr(byte) */
+	u32 ul_shm_base_virt;	/* Dsp Virt SM base addr */
+	u32 ul_tlb_base_virt;	/* Base of MMU TLB entry */
+	/* Offset of shm_base_virt from tlb_base_virt */
+	u32 ul_shm_offset_virt;
+	s32 entry_ndx;
+	s32 itmp_entry_ndx = 0;	/* DSP-MMU TLB entry base address */
+	struct cfg_hostres *resources = NULL;
+	u32 temp;
+	u32 ul_dsp_clk_rate;
+	u32 ul_dsp_clk_addr;
+	u32 ul_bios_gp_timer;
+	u32 clk_cmd;
+	struct io_mgr *hio_mgr;
+	u32 ul_load_monitor_timer;
+	struct dspbridge_platform_data *pdata =
+				omap_dspbridge_dev->dev.platform_data;
+
+	/* The device context contains all the mmu setup info from when the
+	 * last dsp base image was loaded. The first entry is always
+	 * SHMMEM base. */
+	/* Get SHM_BEG - convert to byte address */
+	(void)dev_get_symbol(dev_context->hdev_obj, SHMBASENAME,
+			     &ul_shm_base_virt);
+	ul_shm_base_virt *= DSPWORDSIZE;
+	DBC_ASSERT(ul_shm_base_virt != 0);
+	/* DSP Virtual address */
+	ul_tlb_base_virt = dev_context->atlb_entry[0].ul_dsp_va;
+	DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
+	ul_shm_offset_virt =
+	    ul_shm_base_virt - (ul_tlb_base_virt * DSPWORDSIZE);
+	/* Kernel logical address */
+	ul_shm_base = dev_context->atlb_entry[0].ul_gpp_va + ul_shm_offset_virt;
+
+	DBC_ASSERT(ul_shm_base != 0);
+	/* 2nd wd is used as sync field */
+	dw_sync_addr = ul_shm_base + SHMSYNCOFFSET;
+	/* Write a signature into the shm base + offset; this will
+	 * get cleared when the DSP program starts. */
+	if ((ul_shm_base_virt == 0) || (ul_shm_base == 0)) {
+		pr_err("%s: Illegal SM base\n", __func__);
+		status = -EPERM;
+	} else
+		__raw_writel(0xffffffff, dw_sync_addr);
+
+	if (!status) {
+		resources = dev_context->resources;
+		if (!resources)
+			status = -EPERM;
+
+		/* Assert RST1 i.e only the RST only for DSP megacell */
+		if (!status) {
+			(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
+					OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD,
+					OMAP2_RM_RSTCTRL);
+			/* Mask address with 1K for compatibility */
+			__raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK,
+					OMAP343X_CTRL_REGADDR(
+					OMAP343X_CONTROL_IVA2_BOOTADDR));
+			/*
+			 * Set bootmode to self loop if dsp_debug flag is true
+			 */
+			__raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0,
+					OMAP343X_CTRL_REGADDR(
+					OMAP343X_CONTROL_IVA2_BOOTMOD));
+		}
+	}
+	if (!status) {
+		/* Reset and Unreset the RST2, so that BOOTADDR is copied to
+		 * IVA2 SYSC register */
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
+			OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		udelay(100);
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		udelay(100);
+
+		/* Disbale the DSP MMU */
+		hw_mmu_disable(resources->dw_dmmu_base);
+		/* Disable TWL */
+		hw_mmu_twl_disable(resources->dw_dmmu_base);
+
+		/* Only make TLB entry if both addresses are non-zero */
+		for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB;
+		     entry_ndx++) {
+			struct bridge_ioctl_extproc *e = &dev_context->atlb_entry[entry_ndx];
+			struct hw_mmu_map_attrs_t map_attrs = {
+				.endianism = e->endianism,
+				.element_size = e->elem_size,
+				.mixed_size = e->mixed_mode,
+			};
+
+			if (!e->ul_gpp_pa || !e->ul_dsp_va)
+				continue;
+
+			dev_dbg(bridge,
+					"MMU %d, pa: 0x%x, va: 0x%x, size: 0x%x",
+					itmp_entry_ndx,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size);
+
+			hw_mmu_tlb_add(dev_context->dw_dsp_mmu_base,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size,
+					itmp_entry_ndx,
+					&map_attrs, 1, 1);
+
+			itmp_entry_ndx++;
+		}
+	}
+
+	/* Lock the above TLB entries and get the BIOS and load monitor timer
+	 * information */
+	if (!status) {
+		hw_mmu_num_locked_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_victim_num_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_ttb_set(resources->dw_dmmu_base,
+			       dev_context->pt_attrs->l1_base_pa);
+		hw_mmu_twl_enable(resources->dw_dmmu_base);
+		/* Enable the SmartIdle and AutoIdle bit for MMU_SYSCONFIG */
+
+		temp = __raw_readl((resources->dw_dmmu_base) + 0x10);
+		temp = (temp & 0xFFFFFFEF) | 0x11;
+		__raw_writel(temp, (resources->dw_dmmu_base) + 0x10);
+
+		/* Let the DSP MMU run */
+		hw_mmu_enable(resources->dw_dmmu_base);
+
+		/* Enable the BIOS clock */
+		(void)dev_get_symbol(dev_context->hdev_obj,
+				     BRIDGEINIT_BIOSGPTIMER, &ul_bios_gp_timer);
+		(void)dev_get_symbol(dev_context->hdev_obj,
+				     BRIDGEINIT_LOADMON_GPTIMER,
+				     &ul_load_monitor_timer);
+	}
+
+	if (!status) {
+		if (ul_load_monitor_timer != 0xFFFF) {
+			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
+			    ul_load_monitor_timer;
+			dsp_peripheral_clk_ctrl(dev_context, &clk_cmd);
+		} else {
+			dev_dbg(bridge, "Not able to get the symbol for Load "
+				"Monitor Timer\n");
+		}
+	}
+
+	if (!status) {
+		if (ul_bios_gp_timer != 0xFFFF) {
+			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
+			    ul_bios_gp_timer;
+			dsp_peripheral_clk_ctrl(dev_context, &clk_cmd);
+		} else {
+			dev_dbg(bridge,
+				"Not able to get the symbol for BIOS Timer\n");
+		}
+	}
+
+	if (!status) {
+		/* Set the DSP clock rate */
+		(void)dev_get_symbol(dev_context->hdev_obj,
+				     "_BRIDGEINIT_DSP_FREQ", &ul_dsp_clk_addr);
+		/*Set Autoidle Mode for IVA2 PLL */
+		(*pdata->dsp_cm_write)(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+				OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+
+		if ((unsigned int *)ul_dsp_clk_addr != NULL) {
+			/* Get the clock rate */
+			ul_dsp_clk_rate = dsp_clk_get_iva2_rate();
+			dev_dbg(bridge, "%s: DSP clock rate (KHZ): 0x%x \n",
+				__func__, ul_dsp_clk_rate);
+			(void)bridge_brd_write(dev_context,
+					       (u8 *) &ul_dsp_clk_rate,
+					       ul_dsp_clk_addr, sizeof(u32), 0);
+		}
+		/*
+		 * Enable Mailbox events and also drain any pending
+		 * stale messages.
+		 */
+		dev_context->mbox = omap_mbox_get("dsp");
+		if (IS_ERR(dev_context->mbox)) {
+			dev_context->mbox = NULL;
+			pr_err("%s: Failed to get dsp mailbox handle\n",
+								__func__);
+			status = -EPERM;
+		}
+
+	}
+	if (!status) {
+		dev_context->mbox->rxq->callback = (int (*)(void *))io_mbox_msg;
+
+/*PM_IVA2GRPSEL_PER = 0xC0;*/
+		temp = readl(resources->dw_per_pm_base + 0xA8);
+		temp = (temp & 0xFFFFFF30) | 0xC0;
+		writel(temp, resources->dw_per_pm_base + 0xA8);
+
+/*PM_MPUGRPSEL_PER &= 0xFFFFFF3F; */
+		temp = readl(resources->dw_per_pm_base + 0xA4);
+		temp = (temp & 0xFFFFFF3F);
+		writel(temp, resources->dw_per_pm_base + 0xA4);
+/*CM_SLEEPDEP_PER |= 0x04; */
+		temp = readl(resources->dw_per_base + 0x44);
+		temp = (temp & 0xFFFFFFFB) | 0x04;
+		writel(temp, resources->dw_per_base + 0x44);
+
+/*CM_CLKSTCTRL_IVA2 = 0x00000003 -To Allow automatic transitions */
+		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_ENABLE_AUTO,
+					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
+
+		/* Let DSP go */
+		dev_dbg(bridge, "%s Unreset\n", __func__);
+		/* Enable DSP MMU Interrupts */
+		hw_mmu_event_enable(resources->dw_dmmu_base,
+				    HW_MMU_ALL_INTERRUPTS);
+		/* release the RST1, DSP starts executing now .. */
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+		dev_dbg(bridge, "Waiting for Sync @ 0x%x\n", dw_sync_addr);
+		dev_dbg(bridge, "DSP c_int00 Address =  0x%x\n", dsp_addr);
+		if (dsp_debug)
+			while (__raw_readw(dw_sync_addr))
+				;;
+
+		/* Wait for DSP to clear word in shared memory */
+		/* Read the Location */
+		if (!wait_for_start(dev_context, dw_sync_addr))
+			status = -ETIMEDOUT;
+
+		/* Start wdt */
+		dsp_wdt_sm_set((void *)ul_shm_base);
+		dsp_wdt_enable(true);
+
+		status = dev_get_io_mgr(dev_context->hdev_obj, &hio_mgr);
+		if (hio_mgr) {
+			io_sh_msetting(hio_mgr, SHM_OPPINFO, NULL);
+			/* Write the synchronization bit to indicate the
+			 * completion of OPP table update to DSP
+			 */
+			__raw_writel(0XCAFECAFE, dw_sync_addr);
+
+			/* update board state */
+			dev_context->dw_brd_state = BRD_RUNNING;
+			/* (void)chnlsm_enable_interrupt(dev_context); */
+		} else {
+			dev_context->dw_brd_state = BRD_UNKNOWN;
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_stop ========
+ *  purpose:
+ *      Puts DSP in self loop.
+ *
+ *  Preconditions :
+ *  a) None
+ */
+static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt_attrs;
+	u32 dsp_pwr_state;
+	int clk_status;
+	struct dspbridge_platform_data *pdata =
+				omap_dspbridge_dev->dev.platform_data;
+
+	if (dev_context->dw_brd_state == BRD_STOPPED)
+		return status;
+
+	/* as per TRM, it is advised to first drive the IVA2 to 'Standby' mode,
+	 * before turning off the clocks.. This is to ensure that there are no
+	 * pending L3 or other transactons from IVA2 */
+	dsp_pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
+					OMAP_POWERSTATEST_MASK;
+	if (dsp_pwr_state != PWRDM_POWER_OFF) {
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		sm_interrupt_dsp(dev_context, MBX_PM_DSPIDLE);
+		mdelay(10);
+
+		/* IVA2 is not in OFF state */
+		/* Set PM_PWSTCTRL_IVA2  to OFF */
+		(*pdata->dsp_prm_rmw_bits)(OMAP_POWERSTATEST_MASK,
+			PWRDM_POWER_OFF, OMAP3430_IVA2_MOD, OMAP2_PM_PWSTCTRL);
+		/* Set the SW supervised state transition for Sleep */
+		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_FORCE_SLEEP,
+					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
+	}
+	udelay(10);
+	/* Release the Ext Base virtual Address as the next DSP Program
+	 * may have a different load address */
+	if (dev_context->dw_dsp_ext_base_addr)
+		dev_context->dw_dsp_ext_base_addr = 0;
+
+	dev_context->dw_brd_state = BRD_STOPPED;	/* update board state */
+
+	dsp_wdt_enable(false);
+
+	/* This is a good place to clear the MMU page tables as well */
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		memset((u8 *) pt_attrs->l1_base_va, 0x00, pt_attrs->l1_size);
+		memset((u8 *) pt_attrs->l2_base_va, 0x00, pt_attrs->l2_size);
+		memset((u8 *) pt_attrs->pg_info, 0x00,
+		       (pt_attrs->l2_num_pages * sizeof(struct page_info)));
+	}
+	/* Disable the mailbox interrupts */
+	if (dev_context->mbox) {
+		omap_mbox_disable_irq(dev_context->mbox, IRQ_RX);
+		omap_mbox_put(dev_context->mbox);
+		dev_context->mbox = NULL;
+	}
+	/* Reset IVA2 clocks*/
+	(*pdata->dsp_prm_write)(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK |
+			OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+	clk_status = dsp_clk_disable(DSP_CLK_IVA2);
+
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_status ========
+ *      Returns the board status.
+ */
+static int bridge_brd_status(struct bridge_dev_context *dev_ctxt,
+				    int *board_state)
+{
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	*board_state = dev_context->dw_brd_state;
+	return 0;
+}
+
+/*
+ *  ======== bridge_brd_write ========
+ *      Copies the buffers to DSP internal or external memory.
+ */
+static int bridge_brd_write(struct bridge_dev_context *dev_ctxt,
+				   u8 *host_buff, u32 dsp_addr,
+				   u32 ul_num_bytes, u32 mem_type)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+
+	if (dsp_addr < dev_context->dw_dsp_start_add) {
+		status = -EPERM;
+		return status;
+	}
+	if ((dsp_addr - dev_context->dw_dsp_start_add) <
+	    dev_context->dw_internal_size) {
+		status = write_dsp_data(dev_ctxt, host_buff, dsp_addr,
+					ul_num_bytes, mem_type);
+	} else {
+		status = write_ext_dsp_data(dev_context, host_buff, dsp_addr,
+					    ul_num_bytes, mem_type, false);
+	}
+
+	return status;
+}
+
+/*
+ *  ======== bridge_dev_create ========
+ *      Creates a driver object. Puts DSP in self loop.
+ */
+static int bridge_dev_create(struct bridge_dev_context
+					**dev_cntxt,
+					struct dev_object *hdev_obj,
+					struct cfg_hostres *config_param)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = NULL;
+	s32 entry_ndx;
+	struct cfg_hostres *resources = config_param;
+	struct pg_table_attrs *pt_attrs;
+	u32 pg_tbl_pa;
+	u32 pg_tbl_va;
+	u32 align_size;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	/* Allocate and initialize a data structure to contain the bridge driver
+	 *  state, which becomes the context for later calls into this driver */
+	dev_context = kzalloc(sizeof(struct bridge_dev_context), GFP_KERNEL);
+	if (!dev_context) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	dev_context->dw_dsp_start_add = (u32) OMAP_GEM_BASE;
+	dev_context->dw_self_loop = (u32) NULL;
+	dev_context->dsp_per_clks = 0;
+	dev_context->dw_internal_size = OMAP_DSP_SIZE;
+	/*  Clear dev context MMU table entries.
+	 *  These get set on bridge_io_on_loaded() call after program loaded. */
+	for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB; entry_ndx++) {
+		dev_context->atlb_entry[entry_ndx].ul_gpp_pa =
+		    dev_context->atlb_entry[entry_ndx].ul_dsp_va = 0;
+	}
+	dev_context->dw_dsp_base_addr = (u32) MEM_LINEAR_ADDRESS((void *)
+								 (config_param->
+								  dw_mem_base
+								  [3]),
+								 config_param->
+								 dw_mem_length
+								 [3]);
+	if (!dev_context->dw_dsp_base_addr)
+		status = -EPERM;
+
+	pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL);
+	if (pt_attrs != NULL) {
+		/* Assuming that we use only DSP's memory map
+		 * until 0x4000:0000 , we would need only 1024
+		 * L1 enties i.e L1 size = 4K */
+		pt_attrs->l1_size = 0x1000;
+		align_size = pt_attrs->l1_size;
+		/* Align sizes are expected to be power of 2 */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l1_size,
+						     align_size, &pg_tbl_pa);
+
+		/* Check if the PA is aligned for us */
+		if ((pg_tbl_pa) & (align_size - 1)) {
+			/* PA not aligned to page table size ,
+			 * try with more allocation and align */
+			mem_free_phys_mem((void *)pg_tbl_va, pg_tbl_pa,
+					  pt_attrs->l1_size);
+			/* we like to get aligned on L1 table size */
+			pg_tbl_va =
+			    (u32) mem_alloc_phys_mem((pt_attrs->l1_size) * 2,
+						     align_size, &pg_tbl_pa);
+			/* We should be able to get aligned table now */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size * 2;
+			/* Align the PA to the next 'align'  boundary */
+			pt_attrs->l1_base_pa =
+			    ((pg_tbl_pa) +
+			     (align_size - 1)) & (~(align_size - 1));
+			pt_attrs->l1_base_va =
+			    pg_tbl_va + (pt_attrs->l1_base_pa - pg_tbl_pa);
+		} else {
+			/* We got aligned PA, cool */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size;
+			pt_attrs->l1_base_pa = pg_tbl_pa;
+			pt_attrs->l1_base_va = pg_tbl_va;
+		}
+		if (pt_attrs->l1_base_va)
+			memset((u8 *) pt_attrs->l1_base_va, 0x00,
+			       pt_attrs->l1_size);
+
+		/* number of L2 page tables = DMM pool used + SHMMEM +EXTMEM +
+		 * L4 pages */
+		pt_attrs->l2_num_pages = ((DMMPOOLSIZE >> 20) + 6);
+		pt_attrs->l2_size = HW_MMU_COARSE_PAGE_SIZE *
+		    pt_attrs->l2_num_pages;
+		align_size = 4;	/* Make it u32 aligned */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l2_size,
+						     align_size, &pg_tbl_pa);
+		pt_attrs->l2_tbl_alloc_pa = pg_tbl_pa;
+		pt_attrs->l2_tbl_alloc_va = pg_tbl_va;
+		pt_attrs->l2_tbl_alloc_sz = pt_attrs->l2_size;
+		pt_attrs->l2_base_pa = pg_tbl_pa;
+		pt_attrs->l2_base_va = pg_tbl_va;
+
+		if (pt_attrs->l2_base_va)
+			memset((u8 *) pt_attrs->l2_base_va, 0x00,
+			       pt_attrs->l2_size);
+
+		pt_attrs->pg_info = kzalloc(pt_attrs->l2_num_pages *
+					sizeof(struct page_info), GFP_KERNEL);
+		dev_dbg(bridge,
+			"L1 pa %x, va %x, size %x\n L2 pa %x, va "
+			"%x, size %x\n", pt_attrs->l1_base_pa,
+			pt_attrs->l1_base_va, pt_attrs->l1_size,
+			pt_attrs->l2_base_pa, pt_attrs->l2_base_va,
+			pt_attrs->l2_size);
+		dev_dbg(bridge, "pt_attrs %p L2 NumPages %x pg_info %p\n",
+			pt_attrs, pt_attrs->l2_num_pages, pt_attrs->pg_info);
+	}
+	if ((pt_attrs != NULL) && (pt_attrs->l1_base_va != 0) &&
+	    (pt_attrs->l2_base_va != 0) && (pt_attrs->pg_info != NULL))
+		dev_context->pt_attrs = pt_attrs;
+	else
+		status = -ENOMEM;
+
+	if (!status) {
+		spin_lock_init(&pt_attrs->pg_lock);
+		dev_context->tc_word_swap_on = drv_datap->tc_wordswapon;
+
+		/* Set the Clock Divisor for the DSP module */
+		udelay(5);
+		/* MMU address is obtained from the host
+		 * resources struct */
+		dev_context->dw_dsp_mmu_base = resources->dw_dmmu_base;
+	}
+	if (!status) {
+		dev_context->hdev_obj = hdev_obj;
+		/* Store current board state. */
+		dev_context->dw_brd_state = BRD_UNKNOWN;
+		dev_context->resources = resources;
+		dsp_clk_enable(DSP_CLK_IVA2);
+		bridge_brd_stop(dev_context);
+		/* Return ptr to our device state to the DSP API for storage */
+		*dev_cntxt = dev_context;
+	} else {
+		if (pt_attrs != NULL) {
+			kfree(pt_attrs->pg_info);
+
+			if (pt_attrs->l2_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l2_tbl_alloc_va,
+						  pt_attrs->l2_tbl_alloc_pa,
+						  pt_attrs->l2_tbl_alloc_sz);
+			}
+			if (pt_attrs->l1_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l1_tbl_alloc_va,
+						  pt_attrs->l1_tbl_alloc_pa,
+						  pt_attrs->l1_tbl_alloc_sz);
+			}
+		}
+		kfree(pt_attrs);
+		kfree(dev_context);
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== bridge_dev_ctrl ========
+ *      Receives device specific commands.
+ */
+static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
+				  u32 dw_cmd, void *pargs)
+{
+	int status = 0;
+	struct bridge_ioctl_extproc *pa_ext_proc =
+					(struct bridge_ioctl_extproc *)pargs;
+	s32 ndx;
+
+	switch (dw_cmd) {
+	case BRDIOCTL_CHNLREAD:
+		break;
+	case BRDIOCTL_CHNLWRITE:
+		break;
+	case BRDIOCTL_SETMMUCONFIG:
+		/* store away dsp-mmu setup values for later use */
+		for (ndx = 0; ndx < BRDIOCTL_NUMOFMMUTLB; ndx++, pa_ext_proc++)
+			dev_context->atlb_entry[ndx] = *pa_ext_proc;
+		break;
+	case BRDIOCTL_DEEPSLEEP:
+	case BRDIOCTL_EMERGENCYSLEEP:
+		/* Currently only DSP Idle is supported Need to update for
+		 * later releases */
+		status = sleep_dsp(dev_context, PWR_DEEPSLEEP, pargs);
+		break;
+	case BRDIOCTL_WAKEUP:
+		status = wake_dsp(dev_context, pargs);
+		break;
+	case BRDIOCTL_CLK_CTRL:
+		status = 0;
+		/* Looking For Baseport Fix for Clocks */
+		status = dsp_peripheral_clk_ctrl(dev_context, pargs);
+		break;
+	case BRDIOCTL_PWR_HIBERNATE:
+		status = handle_hibernation_from_dsp(dev_context);
+		break;
+	case BRDIOCTL_PRESCALE_NOTIFY:
+		status = pre_scale_dsp(dev_context, pargs);
+		break;
+	case BRDIOCTL_POSTSCALE_NOTIFY:
+		status = post_scale_dsp(dev_context, pargs);
+		break;
+	case BRDIOCTL_CONSTRAINT_REQUEST:
+		status = handle_constraints_set(dev_context, pargs);
+		break;
+	default:
+		status = -EPERM;
+		break;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_dev_destroy ========
+ *      Destroys the driver object.
+ */
+static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
+{
+	struct pg_table_attrs *pt_attrs;
+	int status = 0;
+	struct bridge_dev_context *dev_context = (struct bridge_dev_context *)
+	    dev_ctxt;
+	struct cfg_hostres *host_res;
+	u32 shm_size;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	/* It should never happen */
+	if (!dev_ctxt)
+		return -EFAULT;
+
+	/* first put the device to stop state */
+	bridge_brd_stop(dev_context);
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		kfree(pt_attrs->pg_info);
+
+		if (pt_attrs->l2_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l2_tbl_alloc_va,
+					  pt_attrs->l2_tbl_alloc_pa,
+					  pt_attrs->l2_tbl_alloc_sz);
+		}
+		if (pt_attrs->l1_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l1_tbl_alloc_va,
+					  pt_attrs->l1_tbl_alloc_pa,
+					  pt_attrs->l1_tbl_alloc_sz);
+		}
+		kfree(pt_attrs);
+
+	}
+
+	if (dev_context->resources) {
+		host_res = dev_context->resources;
+		shm_size = drv_datap->shm_size;
+		if (shm_size >= 0x10000) {
+			if ((host_res->dw_mem_base[1]) &&
+			    (host_res->dw_mem_phys[1])) {
+				mem_free_phys_mem((void *)
+						  host_res->dw_mem_base
+						  [1],
+						  host_res->dw_mem_phys
+						  [1], shm_size);
+			}
+		} else {
+			dev_dbg(bridge, "%s: Error getting shm size "
+				"from registry: %x. Not calling "
+				"mem_free_phys_mem\n", __func__,
+				status);
+		}
+		host_res->dw_mem_base[1] = 0;
+		host_res->dw_mem_phys[1] = 0;
+
+		if (host_res->dw_mem_base[0])
+			iounmap((void *)host_res->dw_mem_base[0]);
+		if (host_res->dw_mem_base[2])
+			iounmap((void *)host_res->dw_mem_base[2]);
+		if (host_res->dw_mem_base[3])
+			iounmap((void *)host_res->dw_mem_base[3]);
+		if (host_res->dw_mem_base[4])
+			iounmap((void *)host_res->dw_mem_base[4]);
+		if (host_res->dw_dmmu_base)
+			iounmap(host_res->dw_dmmu_base);
+		if (host_res->dw_per_base)
+			iounmap(host_res->dw_per_base);
+		if (host_res->dw_per_pm_base)
+			iounmap((void *)host_res->dw_per_pm_base);
+		if (host_res->dw_core_pm_base)
+			iounmap((void *)host_res->dw_core_pm_base);
+		if (host_res->dw_sys_ctrl_base)
+			iounmap(host_res->dw_sys_ctrl_base);
+
+		host_res->dw_mem_base[0] = (u32) NULL;
+		host_res->dw_mem_base[2] = (u32) NULL;
+		host_res->dw_mem_base[3] = (u32) NULL;
+		host_res->dw_mem_base[4] = (u32) NULL;
+		host_res->dw_dmmu_base = NULL;
+		host_res->dw_sys_ctrl_base = NULL;
+
+		kfree(host_res);
+	}
+
+	/* Free the driver's device context: */
+	kfree(drv_datap->base_img);
+	kfree(drv_datap);
+	dev_set_drvdata(bridge, NULL);
+	kfree((void *)dev_ctxt);
+	return status;
+}
+
+static int bridge_brd_mem_copy(struct bridge_dev_context *dev_ctxt,
+				   u32 dsp_dest_addr, u32 dsp_src_addr,
+				   u32 ul_num_bytes, u32 mem_type)
+{
+	int status = 0;
+	u32 src_addr = dsp_src_addr;
+	u32 dest_addr = dsp_dest_addr;
+	u32 copy_bytes = 0;
+	u32 total_bytes = ul_num_bytes;
+	u8 host_buf[BUFFERSIZE];
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	while (total_bytes > 0 && !status) {
+		copy_bytes =
+		    total_bytes > BUFFERSIZE ? BUFFERSIZE : total_bytes;
+		/* Read from External memory */
+		status = read_ext_dsp_data(dev_ctxt, host_buf, src_addr,
+					   copy_bytes, mem_type);
+		if (!status) {
+			if (dest_addr < (dev_context->dw_dsp_start_add +
+					 dev_context->dw_internal_size)) {
+				/* Write to Internal memory */
+				status = write_dsp_data(dev_ctxt, host_buf,
+							dest_addr, copy_bytes,
+							mem_type);
+			} else {
+				/* Write to External memory */
+				status =
+				    write_ext_dsp_data(dev_ctxt, host_buf,
+						       dest_addr, copy_bytes,
+						       mem_type, false);
+			}
+		}
+		total_bytes -= copy_bytes;
+		src_addr += copy_bytes;
+		dest_addr += copy_bytes;
+	}
+	return status;
+}
+
+/* Mem Write does not halt the DSP to write unlike bridge_brd_write */
+static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
+				    u8 *host_buff, u32 dsp_addr,
+				    u32 ul_num_bytes, u32 mem_type)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	u32 ul_remain_bytes = 0;
+	u32 ul_bytes = 0;
+	ul_remain_bytes = ul_num_bytes;
+	while (ul_remain_bytes > 0 && !status) {
+		ul_bytes =
+		    ul_remain_bytes > BUFFERSIZE ? BUFFERSIZE : ul_remain_bytes;
+		if (dsp_addr < (dev_context->dw_dsp_start_add +
+				 dev_context->dw_internal_size)) {
+			status =
+			    write_dsp_data(dev_ctxt, host_buff, dsp_addr,
+					   ul_bytes, mem_type);
+		} else {
+			status = write_ext_dsp_data(dev_ctxt, host_buff,
+						    dsp_addr, ul_bytes,
+						    mem_type, true);
+		}
+		ul_remain_bytes -= ul_bytes;
+		dsp_addr += ul_bytes;
+		host_buff = host_buff + ul_bytes;
+	}
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_mem_map ========
+ *      This function maps MPU buffer to the DSP address space. It performs
+ *  linear to physical address translation if required. It translates each
+ *  page since linear addresses can be physically non-contiguous
+ *  All address & size arguments are assumed to be page aligned (in proc.c)
+ *
+ *  TODO: Disable MMU while updating the page tables (but that'll stall DSP)
+ */
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages)
+{
+	u32 attrs;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct hw_mmu_map_attrs_t hw_attrs;
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	u32 write = 0;
+	u32 num_usr_pgs = 0;
+	struct page *mapped_page, *pg;
+	s32 pg_num;
+	u32 va = virt_addr;
+	struct task_struct *curr_task = current;
+	u32 pg_i = 0;
+	u32 mpu_addr, pa;
+
+	dev_dbg(bridge,
+		"%s hDevCtxt %p, pa %x, va %x, size %x, ul_map_attr %x\n",
+		__func__, dev_ctxt, ul_mpu_addr, virt_addr, ul_num_bytes,
+		ul_map_attr);
+	if (ul_num_bytes == 0)
+		return -EINVAL;
+
+	if (ul_map_attr & DSP_MAP_DIR_MASK) {
+		attrs = ul_map_attr;
+	} else {
+		/* Assign default attributes */
+		attrs = ul_map_attr | (DSP_MAPVIRTUALADDR | DSP_MAPELEMSIZE16);
+	}
+	/* Take mapping properties */
+	if (attrs & DSP_MAPBIGENDIAN)
+		hw_attrs.endianism = HW_BIG_ENDIAN;
+	else
+		hw_attrs.endianism = HW_LITTLE_ENDIAN;
+
+	hw_attrs.mixed_size = (enum hw_mmu_mixed_size_t)
+	    ((attrs & DSP_MAPMIXEDELEMSIZE) >> 2);
+	/* Ignore element_size if mixed_size is enabled */
+	if (hw_attrs.mixed_size == 0) {
+		if (attrs & DSP_MAPELEMSIZE8) {
+			/* Size is 8 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE8BIT;
+		} else if (attrs & DSP_MAPELEMSIZE16) {
+			/* Size is 16 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE16BIT;
+		} else if (attrs & DSP_MAPELEMSIZE32) {
+			/* Size is 32 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE32BIT;
+		} else if (attrs & DSP_MAPELEMSIZE64) {
+			/* Size is 64 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE64BIT;
+		} else {
+			/*
+			 * Mixedsize isn't enabled, so size can't be
+			 * zero here
+			 */
+			return -EINVAL;
+		}
+	}
+	if (attrs & DSP_MAPDONOTLOCK)
+		hw_attrs.donotlockmpupage = 1;
+	else
+		hw_attrs.donotlockmpupage = 0;
+
+	if (attrs & DSP_MAPVMALLOCADDR) {
+		return mem_map_vmalloc(dev_ctxt, ul_mpu_addr, virt_addr,
+				       ul_num_bytes, &hw_attrs);
+	}
+	/*
+	 * Do OS-specific user-va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	if ((attrs & DSP_MAPPHYSICALADDR)) {
+		status = pte_update(dev_context, ul_mpu_addr, virt_addr,
+				    ul_num_bytes, &hw_attrs);
+		goto func_cont;
+	}
+
+	/*
+	 * Important Note: ul_mpu_addr is mapped from user application process
+	 * to current process - it must lie completely within the current
+	 * virtual memory address space in order to be of use to us here!
+	 */
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, ul_mpu_addr);
+	if (vma)
+		dev_dbg(bridge,
+			"VMAfor UserBuf: ul_mpu_addr=%x, ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
+
+	/*
+	 * It is observed that under some circumstances, the user buffer is
+	 * spread across several VMAs. So loop through and check if the entire
+	 * user buffer is covered
+	 */
+	while ((vma) && (ul_mpu_addr + ul_num_bytes > vma->vm_end)) {
+		/* jump to the next VMA region */
+		vma = find_vma(mm, vma->vm_end + 1);
+		dev_dbg(bridge,
+			"VMA for UserBuf ul_mpu_addr=%x ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
+	}
+	if (!vma) {
+		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
+		       __func__, ul_mpu_addr, ul_num_bytes);
+		status = -EINVAL;
+		up_read(&mm->mmap_sem);
+		goto func_cont;
+	}
+
+	if (vma->vm_flags & VM_IO) {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		mpu_addr = ul_mpu_addr;
+
+		/* Get the physical addresses for user buffer */
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pa = user_va2_pa(mm, mpu_addr);
+			if (!pa) {
+				status = -EPERM;
+				pr_err("DSPBRIDGE: VM_IO mapping physical"
+				       "address is invalid\n");
+				break;
+			}
+			if (pfn_valid(__phys_to_pfn(pa))) {
+				pg = PHYS_TO_PAGE(pa);
+				get_page(pg);
+				if (page_count(pg) < 1) {
+					pr_err("Bad page in VM_IO buffer\n");
+					bad_page_dump(pa, pg);
+				}
+			}
+			status = pte_set(dev_context->pt_attrs, pa,
+					 va, HW_PAGE_SIZE4KB, &hw_attrs);
+			if (status)
+				break;
+
+			va += HW_PAGE_SIZE4KB;
+			mpu_addr += HW_PAGE_SIZE4KB;
+			pa += HW_PAGE_SIZE4KB;
+		}
+	} else {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+			write = 1;
+
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pg_num = get_user_pages(curr_task, mm, ul_mpu_addr, 1,
+						write, 1, &mapped_page, NULL);
+			if (pg_num > 0) {
+				if (page_count(mapped_page) < 1) {
+					pr_err("Bad page count after doing"
+					       "get_user_pages on"
+					       "user buffer\n");
+					bad_page_dump(page_to_phys(mapped_page),
+						      mapped_page);
+				}
+				status = pte_set(dev_context->pt_attrs,
+						 page_to_phys(mapped_page), va,
+						 HW_PAGE_SIZE4KB, &hw_attrs);
+				if (status)
+					break;
+
+				if (mapped_pages)
+					mapped_pages[pg_i] = mapped_page;
+
+				va += HW_PAGE_SIZE4KB;
+				ul_mpu_addr += HW_PAGE_SIZE4KB;
+			} else {
+				pr_err("DSPBRIDGE: get_user_pages FAILED,"
+				       "MPU addr = 0x%x,"
+				       "vma->vm_flags = 0x%lx,"
+				       "get_user_pages Err"
+				       "Value = %d, Buffer"
+				       "size=0x%x\n", ul_mpu_addr,
+				       vma->vm_flags, pg_num, ul_num_bytes);
+				status = -EPERM;
+				break;
+			}
+		}
+	}
+	up_read(&mm->mmap_sem);
+func_cont:
+	if (status) {
+		/*
+		 * Roll out the mapped pages incase it failed in middle of
+		 * mapping
+		 */
+		if (pg_i) {
+			bridge_brd_mem_un_map(dev_context, virt_addr,
+					   (pg_i * PG_SIZE4K));
+		}
+		status = -EPERM;
+	}
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *      Invalidate the PTEs for the DSP VA block to be unmapped.
+ *
+ *      PTEs of a mapped memory block are contiguous in any page table
+ *      So, instead of looking up the PTE address for every 4K block,
+ *      we clear consecutive PTEs until we unmap all the bytes
+ */
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 virt_addr, u32 ul_num_bytes)
+{
+	u32 l1_base_va;
+	u32 l2_base_va;
+	u32 l2_base_pa;
+	u32 l2_page_num;
+	u32 pte_val;
+	u32 pte_size;
+	u32 pte_count;
+	u32 pte_addr_l1;
+	u32 pte_addr_l2 = 0;
+	u32 rem_bytes;
+	u32 rem_bytes_l2;
+	u32 va_curr;
+	struct page *pg = NULL;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt = dev_context->pt_attrs;
+	u32 temp;
+	u32 paddr;
+	u32 numof4k_pages = 0;
+
+	va_curr = virt_addr;
+	rem_bytes = ul_num_bytes;
+	rem_bytes_l2 = 0;
+	l1_base_va = pt->l1_base_va;
+	pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+	dev_dbg(bridge, "%s dev_ctxt %p, va %x, NumBytes %x l1_base_va %x, "
+		"pte_addr_l1 %x\n", __func__, dev_ctxt, virt_addr,
+		ul_num_bytes, l1_base_va, pte_addr_l1);
+
+	while (rem_bytes && !status) {
+		u32 va_curr_orig = va_curr;
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+		pte_val = *(u32 *) pte_addr_l1;
+		pte_size = hw_mmu_pte_size_l1(pte_val);
+
+		if (pte_size != HW_MMU_COARSE_PAGE_SIZE)
+			goto skip_coarse_page;
+
+		/*
+		 * Get the L2 PA from the L1 PTE, and find
+		 * corresponding L2 VA
+		 */
+		l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+		l2_base_va = l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+		l2_page_num =
+		    (l2_base_pa - pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		/*
+		 * Find the L2 PTE address from which we will start
+		 * clearing, the number of PTEs to be cleared on this
+		 * page, and the size of VA space that needs to be
+		 * cleared on this L2 page
+		 */
+		pte_addr_l2 = hw_mmu_pte_addr_l2(l2_base_va, va_curr);
+		pte_count = pte_addr_l2 & (HW_MMU_COARSE_PAGE_SIZE - 1);
+		pte_count = (HW_MMU_COARSE_PAGE_SIZE - pte_count) / sizeof(u32);
+		if (rem_bytes < (pte_count * PG_SIZE4K))
+			pte_count = rem_bytes / PG_SIZE4K;
+		rem_bytes_l2 = pte_count * PG_SIZE4K;
+
+		/*
+		 * Unmap the VA space on this L2 PT. A quicker way
+		 * would be to clear pte_count entries starting from
+		 * pte_addr_l2. However, below code checks that we don't
+		 * clear invalid entries or less than 64KB for a 64KB
+		 * entry. Similar checking is done for L1 PTEs too
+		 * below
+		 */
+		while (rem_bytes_l2 && !status) {
+			pte_val = *(u32 *) pte_addr_l2;
+			pte_size = hw_mmu_pte_size_l2(pte_val);
+			/* va_curr aligned to pte_size? */
+			if (pte_size == 0 || rem_bytes_l2 < pte_size ||
+			    va_curr & (pte_size - 1)) {
+				status = -EPERM;
+				break;
+			}
+
+			/* Collect Physical addresses from VA */
+			paddr = (pte_val & ~(pte_size - 1));
+			if (pte_size == HW_PAGE_SIZE64KB)
+				numof4k_pages = 16;
+			else
+				numof4k_pages = 1;
+			temp = 0;
+			while (temp++ < numof4k_pages) {
+				if (!pfn_valid(__phys_to_pfn(paddr))) {
+					paddr += HW_PAGE_SIZE4KB;
+					continue;
+				}
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+				paddr += HW_PAGE_SIZE4KB;
+			}
+			if (hw_mmu_pte_clear(pte_addr_l2, va_curr, pte_size)) {
+				status = -EPERM;
+				goto EXIT_LOOP;
+			}
+
+			status = 0;
+			rem_bytes_l2 -= pte_size;
+			va_curr += pte_size;
+			pte_addr_l2 += (pte_size >> 12) * sizeof(u32);
+		}
+		spin_lock(&pt->pg_lock);
+		if (rem_bytes_l2 == 0) {
+			pt->pg_info[l2_page_num].num_entries -= pte_count;
+			if (pt->pg_info[l2_page_num].num_entries == 0) {
+				/*
+				 * Clear the L1 PTE pointing to the L2 PT
+				 */
+				if (!hw_mmu_pte_clear(l1_base_va, va_curr_orig,
+						     HW_MMU_COARSE_PAGE_SIZE))
+					status = 0;
+				else {
+					status = -EPERM;
+					spin_unlock(&pt->pg_lock);
+					goto EXIT_LOOP;
+				}
+			}
+			rem_bytes -= pte_count * PG_SIZE4K;
+		} else
+			status = -EPERM;
+
+		spin_unlock(&pt->pg_lock);
+		continue;
+skip_coarse_page:
+		/* va_curr aligned to pte_size? */
+		/* pte_size = 1 MB or 16 MB */
+		if (pte_size == 0 || rem_bytes < pte_size ||
+		    va_curr & (pte_size - 1)) {
+			status = -EPERM;
+			break;
+		}
+
+		if (pte_size == HW_PAGE_SIZE1MB)
+			numof4k_pages = 256;
+		else
+			numof4k_pages = 4096;
+		temp = 0;
+		/* Collect Physical addresses from VA */
+		paddr = (pte_val & ~(pte_size - 1));
+		while (temp++ < numof4k_pages) {
+			if (pfn_valid(__phys_to_pfn(paddr))) {
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+			}
+			paddr += HW_PAGE_SIZE4KB;
+		}
+		if (!hw_mmu_pte_clear(l1_base_va, va_curr, pte_size)) {
+			status = 0;
+			rem_bytes -= pte_size;
+			va_curr += pte_size;
+		} else {
+			status = -EPERM;
+			goto EXIT_LOOP;
+		}
+	}
+	/*
+	 * It is better to flush the TLB here, so that any stale old entries
+	 * get flushed
+	 */
+EXIT_LOOP:
+	flush_all(dev_context);
+	dev_dbg(bridge,
+		"%s: va_curr %x, pte_addr_l1 %x pte_addr_l2 %x rem_bytes %x,"
+		" rem_bytes_l2 %x status %x\n", __func__, va_curr, pte_addr_l1,
+		pte_addr_l2, rem_bytes, rem_bytes_l2, status);
+	return status;
+}
+
+/*
+ *  ======== user_va2_pa ========
+ *  Purpose:
+ *      This function walks through the page tables to convert a userland
+ *      virtual address to physical address
+ */
+static u32 user_va2_pa(struct mm_struct *mm, u32 address)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	pgd = pgd_offset(mm, address);
+	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
+		pmd = pmd_offset(pgd, address);
+		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
+			ptep = pte_offset_map(pmd, address);
+			if (ptep) {
+				pte = *ptep;
+				if (pte_present(pte))
+					return pte & PAGE_MASK;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ *  ======== pte_update ========
+ *      This function calculates the optimum page-aligned addresses and sizes
+ *      Caller must pass page-aligned values
+ */
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs)
+{
+	u32 i;
+	u32 all_bits;
+	u32 pa_curr = pa;
+	u32 va_curr = va;
+	u32 num_bytes = size;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	int status = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
+
+	while (num_bytes && !status) {
+		/* To find the max. page size with which both PA & VA are
+		 * aligned */
+		all_bits = pa_curr | va_curr;
+
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    pte_set(dev_context->pt_attrs, pa_curr,
+					    va_curr, page_size[i], map_attrs);
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/* Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size */
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== pte_set ========
+ *      This function calculates PTE address (MPU virtual) to be updated
+ *      It also manages the L2 page tables
+ */
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs)
+{
+	u32 i;
+	u32 pte_val;
+	u32 pte_addr_l1;
+	u32 pte_size;
+	/* Base address of the PT that will be updated */
+	u32 pg_tbl_va;
+	u32 l1_base_va;
+	/* Compiler warns that the next three variables might be used
+	 * uninitialized in this function. Doesn't seem so. Working around,
+	 * anyways. */
+	u32 l2_base_va = 0;
+	u32 l2_base_pa = 0;
+	u32 l2_page_num = 0;
+	int status = 0;
+
+	l1_base_va = pt->l1_base_va;
+	pg_tbl_va = l1_base_va;
+	if ((size == HW_PAGE_SIZE64KB) || (size == HW_PAGE_SIZE4KB)) {
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va);
+		if (pte_addr_l1 <= (pt->l1_base_va + pt->l1_size)) {
+			pte_val = *(u32 *) pte_addr_l1;
+			pte_size = hw_mmu_pte_size_l1(pte_val);
+		} else {
+			return -EPERM;
+		}
+		spin_lock(&pt->pg_lock);
+		if (pte_size == HW_MMU_COARSE_PAGE_SIZE) {
+			/* Get the L2 PA from the L1 PTE, and find
+			 * corresponding L2 VA */
+			l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+			l2_base_va =
+			    l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+			l2_page_num =
+			    (l2_base_pa -
+			     pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		} else if (pte_size == 0) {
+			/* L1 PTE is invalid. Allocate a L2 PT and
+			 * point the L1 PTE to it */
+			/* Find a free L2 PT. */
+			for (i = 0; (i < pt->l2_num_pages) &&
+			     (pt->pg_info[i].num_entries != 0); i++)
+				;;
+			if (i < pt->l2_num_pages) {
+				l2_page_num = i;
+				l2_base_pa = pt->l2_base_pa + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				l2_base_va = pt->l2_base_va + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				/* Endianness attributes are ignored for
+				 * HW_MMU_COARSE_PAGE_SIZE */
+				status =
+				    hw_mmu_pte_set(l1_base_va, l2_base_pa, va,
+						   HW_MMU_COARSE_PAGE_SIZE,
+						   attrs);
+			} else {
+				status = -ENOMEM;
+			}
+		} else {
+			/* Found valid L1 PTE of another size.
+			 * Should not overwrite it. */
+			status = -EPERM;
+		}
+		if (!status) {
+			pg_tbl_va = l2_base_va;
+			if (size == HW_PAGE_SIZE64KB)
+				pt->pg_info[l2_page_num].num_entries += 16;
+			else
+				pt->pg_info[l2_page_num].num_entries++;
+			dev_dbg(bridge, "PTE: L2 BaseVa %x, BasePa %x, PageNum "
+				"%x, num_entries %x\n", l2_base_va,
+				l2_base_pa, l2_page_num,
+				pt->pg_info[l2_page_num].num_entries);
+		}
+		spin_unlock(&pt->pg_lock);
+	}
+	if (!status) {
+		dev_dbg(bridge, "PTE: pg_tbl_va %x, pa %x, va %x, size %x\n",
+			pg_tbl_va, pa, va, size);
+		dev_dbg(bridge, "PTE: endianism %x, element_size %x, "
+			"mixed_size %x\n", attrs->endianism,
+			attrs->element_size, attrs->mixed_size);
+		status = hw_mmu_pte_set(pg_tbl_va, pa, va, size, attrs);
+	}
+
+	return status;
+}
+
+/* Memory map kernel VA -- memory allocated with vmalloc */
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs)
+{
+	int status = 0;
+	struct page *page[1];
+	u32 i;
+	u32 pa_curr;
+	u32 pa_next;
+	u32 va_curr;
+	u32 size_curr;
+	u32 num_pages;
+	u32 pa;
+	u32 num_of4k_pages;
+	u32 temp = 0;
+
+	/*
+	 * Do Kernel va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	num_pages = ul_num_bytes / PAGE_SIZE;	/* PAGE_SIZE = OS page size */
+	i = 0;
+	va_curr = ul_mpu_addr;
+	page[0] = vmalloc_to_page((void *)va_curr);
+	pa_next = page_to_phys(page[0]);
+	while (!status && (i < num_pages)) {
+		/*
+		 * Reuse pa_next from the previous iteraion to avoid
+		 * an extra va2pa call
+		 */
+		pa_curr = pa_next;
+		size_curr = PAGE_SIZE;
+		/*
+		 * If the next page is physically contiguous,
+		 * map it with the current one by increasing
+		 * the size of the region to be mapped
+		 */
+		while (++i < num_pages) {
+			page[0] =
+			    vmalloc_to_page((void *)(va_curr + size_curr));
+			pa_next = page_to_phys(page[0]);
+
+			if (pa_next == (pa_curr + size_curr))
+				size_curr += PAGE_SIZE;
+			else
+				break;
+
+		}
+		if (pa_next == 0) {
+			status = -ENOMEM;
+			break;
+		}
+		pa = pa_curr;
+		num_of4k_pages = size_curr / HW_PAGE_SIZE4KB;
+		while (temp++ < num_of4k_pages) {
+			get_page(PHYS_TO_PAGE(pa));
+			pa += HW_PAGE_SIZE4KB;
+		}
+		status = pte_update(dev_context, pa_curr, virt_addr +
+				    (va_curr - ul_mpu_addr), size_curr,
+				    hw_attrs);
+		va_curr += size_curr;
+	}
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
+}
+
+/*
+ *  ======== wait_for_start ========
+ *      Wait for the singal from DSP that it has started, or time out.
+ */
+bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr)
+{
+	u16 timeout = TIHELEN_ACKTIMEOUT;
+
+	/*  Wait for response from board */
+	while (__raw_readw(dw_sync_addr) && --timeout)
+		udelay(10);
+
+	/*  If timed out: return false */
+	if (!timeout) {
+		pr_err("%s: Timed out waiting DSP to Start\n", __func__);
+		return false;
+	}
+	return true;
+}
diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
new file mode 100644
index 00000000000..b789f8fdd89
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
@@ -0,0 +1,550 @@
+/*
+ * tiomap_pwr.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implementation of DSP wake/sleep routines.
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/cfg.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/io_sm.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/brddefs.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/iodefs.h>
+
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
+#include <dspbridge/pwr_sh.h>
+
+/*  ----------------------------------- Bridge Driver */
+#include <dspbridge/dspdeh.h>
+#include <dspbridge/wdt.h>
+
+/*  ----------------------------------- specific to this file */
+#include "_tiomap.h"
+#include "_tiomap_pwr.h"
+#include <mach-omap2/prm-regbits-34xx.h>
+#include <mach-omap2/cm-regbits-34xx.h>
+
+#define PWRSTST_TIMEOUT          200
+
+/*
+ *  ======== handle_constraints_set ========
+ *  	Sets new DSP constraint
+ */
+int handle_constraints_set(struct bridge_dev_context *dev_context,
+				  void *pargs)
+{
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 *constraint_val;
+	struct dspbridge_platform_data *pdata =
+	    omap_dspbridge_dev->dev.platform_data;
+
+	constraint_val = (u32 *) (pargs);
+	/* Read the target value requested by DSP */
+	dev_dbg(bridge, "OPP: %s opp requested = 0x%x\n", __func__,
+		(u32) *(constraint_val + 1));
+
+	/* Set the new opp value */
+	if (pdata->dsp_set_min_opp)
+		(*pdata->dsp_set_min_opp) ((u32) *(constraint_val + 1));
+#endif /* #ifdef CONFIG_TIDSPBRIDGE_DVFS */
+	return 0;
+}
+
+/*
+ *  ======== handle_hibernation_from_dsp ========
+ *  	Handle Hibernation requested from DSP
+ */
+int handle_hibernation_from_dsp(struct bridge_dev_context *dev_context)
+{
+	int status = 0;
+#ifdef CONFIG_PM
+	u16 timeout = PWRSTST_TIMEOUT / 10;
+	u32 pwr_state;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 opplevel;
+	struct io_mgr *hio_mgr;
+#endif
+	struct dspbridge_platform_data *pdata =
+	    omap_dspbridge_dev->dev.platform_data;
+
+	pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
+						OMAP_POWERSTATEST_MASK;
+	/* Wait for DSP to move into OFF state */
+	while ((pwr_state != PWRDM_POWER_OFF) && --timeout) {
+		if (msleep_interruptible(10)) {
+			pr_err("Waiting for DSP OFF mode interrupted\n");
+			return -EPERM;
+		}
+		pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD,
+					OMAP2_PM_PWSTST) & OMAP_POWERSTATEST_MASK;
+	}
+	if (timeout == 0) {
+		pr_err("%s: Timed out waiting for DSP off mode\n", __func__);
+		status = -ETIMEDOUT;
+		return status;
+	} else {
+
+		/* Save mailbox settings */
+		omap_mbox_save_ctx(dev_context->mbox);
+
+		/* Turn off DSP Peripheral clocks and DSP Load monitor timer */
+		status = dsp_clock_disable_all(dev_context->dsp_per_clks);
+
+		/* Disable wdt on hibernation. */
+		dsp_wdt_enable(false);
+
+		if (!status) {
+			/* Update the Bridger Driver state */
+			dev_context->dw_brd_state = BRD_DSP_HIBERNATION;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+			status =
+			    dev_get_io_mgr(dev_context->hdev_obj, &hio_mgr);
+			if (!hio_mgr) {
+				status = DSP_EHANDLE;
+				return status;
+			}
+			io_sh_msetting(hio_mgr, SHM_GETOPP, &opplevel);
+
+			/*
+			 * Set the OPP to low level before moving to OFF
+			 * mode
+			 */
+			if (pdata->dsp_set_min_opp)
+				(*pdata->dsp_set_min_opp) (VDD1_OPP1);
+			status = 0;
+#endif /* CONFIG_TIDSPBRIDGE_DVFS */
+		}
+	}
+#endif
+	return status;
+}
+
+/*
+ *  ======== sleep_dsp ========
+ *  	Put DSP in low power consuming state.
+ */
+int sleep_dsp(struct bridge_dev_context *dev_context, u32 dw_cmd,
+		     void *pargs)
+{
+	int status = 0;
+#ifdef CONFIG_PM
+#ifdef CONFIG_TIDSPBRIDGE_NTFY_PWRERR
+	struct deh_mgr *hdeh_mgr;
+#endif /* CONFIG_TIDSPBRIDGE_NTFY_PWRERR */
+	u16 timeout = PWRSTST_TIMEOUT / 10;
+	u32 pwr_state, target_pwr_state;
+	struct dspbridge_platform_data *pdata =
+				omap_dspbridge_dev->dev.platform_data;
+
+	/* Check if sleep code is valid */
+	if ((dw_cmd != PWR_DEEPSLEEP) && (dw_cmd != PWR_EMERGENCYDEEPSLEEP))
+		return -EINVAL;
+
+	switch (dev_context->dw_brd_state) {
+	case BRD_RUNNING:
+		omap_mbox_save_ctx(dev_context->mbox);
+		if (dsp_test_sleepstate == PWRDM_POWER_OFF) {
+			sm_interrupt_dsp(dev_context, MBX_PM_DSPHIBERNATE);
+			dev_dbg(bridge, "PM: %s - sent hibernate cmd to DSP\n",
+				__func__);
+			target_pwr_state = PWRDM_POWER_OFF;
+		} else {
+			sm_interrupt_dsp(dev_context, MBX_PM_DSPRETENTION);
+			target_pwr_state = PWRDM_POWER_RET;
+		}
+		break;
+	case BRD_RETENTION:
+		omap_mbox_save_ctx(dev_context->mbox);
+		if (dsp_test_sleepstate == PWRDM_POWER_OFF) {
+			sm_interrupt_dsp(dev_context, MBX_PM_DSPHIBERNATE);
+			target_pwr_state = PWRDM_POWER_OFF;
+		} else
+			return 0;
+		break;
+	case BRD_HIBERNATION:
+	case BRD_DSP_HIBERNATION:
+		/* Already in Hibernation, so just return */
+		dev_dbg(bridge, "PM: %s - DSP already in hibernation\n",
+			__func__);
+		return 0;
+	case BRD_STOPPED:
+		dev_dbg(bridge, "PM: %s - Board in STOP state\n", __func__);
+		return 0;
+	default:
+		dev_dbg(bridge, "PM: %s - Bridge in Illegal state\n", __func__);
+		return -EPERM;
+	}
+
+	/* Get the PRCM DSP power domain status */
+	pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD, OMAP2_PM_PWSTST) &
+						OMAP_POWERSTATEST_MASK;
+
+	/* Wait for DSP to move into target power state */
+	while ((pwr_state != target_pwr_state) && --timeout) {
+		if (msleep_interruptible(10)) {
+			pr_err("Waiting for DSP to Suspend interrupted\n");
+			return -EPERM;
+		}
+		pwr_state = (*pdata->dsp_prm_read)(OMAP3430_IVA2_MOD,
+					OMAP2_PM_PWSTST) & OMAP_POWERSTATEST_MASK;
+	}
+
+	if (!timeout) {
+		pr_err("%s: Timed out waiting for DSP off mode, state %x\n",
+		       __func__, pwr_state);
+#ifdef CONFIG_TIDSPBRIDGE_NTFY_PWRERR
+		dev_get_deh_mgr(dev_context->hdev_obj, &hdeh_mgr);
+		bridge_deh_notify(hdeh_mgr, DSP_PWRERROR, 0);
+#endif /* CONFIG_TIDSPBRIDGE_NTFY_PWRERR */
+		return -ETIMEDOUT;
+	} else {
+		/* Update the Bridger Driver state */
+		if (dsp_test_sleepstate == PWRDM_POWER_OFF)
+			dev_context->dw_brd_state = BRD_HIBERNATION;
+		else
+			dev_context->dw_brd_state = BRD_RETENTION;
+
+		/* Disable wdt on hibernation. */
+		dsp_wdt_enable(false);
+
+		/* Turn off DSP Peripheral clocks */
+		status = dsp_clock_disable_all(dev_context->dsp_per_clks);
+		if (status)
+			return status;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+		else if (target_pwr_state == PWRDM_POWER_OFF) {
+			/*
+			 * Set the OPP to low level before moving to OFF mode
+			 */
+			if (pdata->dsp_set_min_opp)
+				(*pdata->dsp_set_min_opp) (VDD1_OPP1);
+		}
+#endif /* CONFIG_TIDSPBRIDGE_DVFS */
+	}
+#endif /* CONFIG_PM */
+	return status;
+}
+
+/*
+ *  ======== wake_dsp ========
+ *  	Wake up DSP from sleep.
+ */
+int wake_dsp(struct bridge_dev_context *dev_context, void *pargs)
+{
+	int status = 0;
+#ifdef CONFIG_PM
+
+	/* Check the board state, if it is not 'SLEEP' then return */
+	if (dev_context->dw_brd_state == BRD_RUNNING ||
+	    dev_context->dw_brd_state == BRD_STOPPED) {
+		/* The Device is in 'RET' or 'OFF' state and Bridge state is not
+		 * 'SLEEP', this means state inconsistency, so return */
+		return 0;
+	}
+
+	/* Send a wakeup message to DSP */
+	sm_interrupt_dsp(dev_context, MBX_PM_DSPWAKEUP);
+
+	/* Set the device state to RUNNIG */
+	dev_context->dw_brd_state = BRD_RUNNING;
+#endif /* CONFIG_PM */
+	return status;
+}
+
+/*
+ *  ======== dsp_peripheral_clk_ctrl ========
+ *  	Enable/Disable the DSP peripheral clocks as needed..
+ */
+int dsp_peripheral_clk_ctrl(struct bridge_dev_context *dev_context,
+				   void *pargs)
+{
+	u32 ext_clk = 0;
+	u32 ext_clk_id = 0;
+	u32 ext_clk_cmd = 0;
+	u32 clk_id_index = MBX_PM_MAX_RESOURCES;
+	u32 tmp_index;
+	u32 dsp_per_clks_before;
+	int status = 0;
+
+	dsp_per_clks_before = dev_context->dsp_per_clks;
+
+	ext_clk = (u32) *((u32 *) pargs);
+	ext_clk_id = ext_clk & MBX_PM_CLK_IDMASK;
+
+	/* process the power message -- TODO, keep it in a separate function */
+	for (tmp_index = 0; tmp_index < MBX_PM_MAX_RESOURCES; tmp_index++) {
+		if (ext_clk_id == bpwr_clkid[tmp_index]) {
+			clk_id_index = tmp_index;
+			break;
+		}
+	}
+	/* TODO -- Assert may be a too hard restriction here.. May be we should
+	 * just return with failure when the CLK ID does not match */
+	/* DBC_ASSERT(clk_id_index < MBX_PM_MAX_RESOURCES); */
+	if (clk_id_index == MBX_PM_MAX_RESOURCES) {
+		/* return with a more meaningfull error code */
+		return -EPERM;
+	}
+	ext_clk_cmd = (ext_clk >> MBX_PM_CLK_CMDSHIFT) & MBX_PM_CLK_CMDMASK;
+	switch (ext_clk_cmd) {
+	case BPWR_DISABLE_CLOCK:
+		status = dsp_clk_disable(bpwr_clks[clk_id_index].clk);
+		dsp_clk_wakeup_event_ctrl(bpwr_clks[clk_id_index].clk_id,
+					  false);
+		if (!status) {
+			(dev_context->dsp_per_clks) &=
+				(~((u32) (1 << bpwr_clks[clk_id_index].clk)));
+		}
+		break;
+	case BPWR_ENABLE_CLOCK:
+		status = dsp_clk_enable(bpwr_clks[clk_id_index].clk);
+		dsp_clk_wakeup_event_ctrl(bpwr_clks[clk_id_index].clk_id, true);
+		if (!status)
+			(dev_context->dsp_per_clks) |=
+				(1 << bpwr_clks[clk_id_index].clk);
+		break;
+	default:
+		dev_dbg(bridge, "%s: Unsupported CMD\n", __func__);
+		/* unsupported cmd */
+		/* TODO -- provide support for AUTOIDLE Enable/Disable
+		 * commands */
+	}
+	return status;
+}
+
+/*
+ *  ========pre_scale_dsp========
+ *  Sends prescale notification to DSP
+ *
+ */
+int pre_scale_dsp(struct bridge_dev_context *dev_context, void *pargs)
+{
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 level;
+	u32 voltage_domain;
+
+	voltage_domain = *((u32 *) pargs);
+	level = *((u32 *) pargs + 1);
+
+	dev_dbg(bridge, "OPP: %s voltage_domain = %x, level = 0x%x\n",
+		__func__, voltage_domain, level);
+	if ((dev_context->dw_brd_state == BRD_HIBERNATION) ||
+	    (dev_context->dw_brd_state == BRD_RETENTION) ||
+	    (dev_context->dw_brd_state == BRD_DSP_HIBERNATION)) {
+		dev_dbg(bridge, "OPP: %s IVA in sleep. No message to DSP\n");
+		return 0;
+	} else if ((dev_context->dw_brd_state == BRD_RUNNING)) {
+		/* Send a prenotificatio to DSP */
+		dev_dbg(bridge, "OPP: %s sent notification to DSP\n", __func__);
+		sm_interrupt_dsp(dev_context, MBX_PM_SETPOINT_PRENOTIFY);
+		return 0;
+	} else {
+		return -EPERM;
+	}
+#endif /* #ifdef CONFIG_TIDSPBRIDGE_DVFS */
+	return 0;
+}
+
+/*
+ *  ========post_scale_dsp========
+ *  Sends postscale notification to DSP
+ *
+ */
+int post_scale_dsp(struct bridge_dev_context *dev_context,
+							void *pargs)
+{
+	int status = 0;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 level;
+	u32 voltage_domain;
+	struct io_mgr *hio_mgr;
+
+	status = dev_get_io_mgr(dev_context->hdev_obj, &hio_mgr);
+	if (!hio_mgr)
+		return -EFAULT;
+
+	voltage_domain = *((u32 *) pargs);
+	level = *((u32 *) pargs + 1);
+	dev_dbg(bridge, "OPP: %s voltage_domain = %x, level = 0x%x\n",
+		__func__, voltage_domain, level);
+	if ((dev_context->dw_brd_state == BRD_HIBERNATION) ||
+	    (dev_context->dw_brd_state == BRD_RETENTION) ||
+	    (dev_context->dw_brd_state == BRD_DSP_HIBERNATION)) {
+		/* Update the OPP value in shared memory */
+		io_sh_msetting(hio_mgr, SHM_CURROPP, &level);
+		dev_dbg(bridge, "OPP: %s IVA in sleep. Wrote to shm\n",
+			__func__);
+	} else if ((dev_context->dw_brd_state == BRD_RUNNING)) {
+		/* Update the OPP value in shared memory */
+		io_sh_msetting(hio_mgr, SHM_CURROPP, &level);
+		/* Send a post notification to DSP */
+		sm_interrupt_dsp(dev_context, MBX_PM_SETPOINT_POSTNOTIFY);
+		dev_dbg(bridge, "OPP: %s wrote to shm. Sent post notification "
+			"to DSP\n", __func__);
+	} else {
+		status = -EPERM;
+	}
+#endif /* #ifdef CONFIG_TIDSPBRIDGE_DVFS */
+	return status;
+}
+
+void dsp_clk_wakeup_event_ctrl(u32 clock_id, bool enable)
+{
+	struct cfg_hostres *resources;
+	int status = 0;
+	u32 iva2_grpsel;
+	u32 mpu_grpsel;
+	struct dev_object *hdev_object = NULL;
+	struct bridge_dev_context *bridge_context = NULL;
+
+	hdev_object = (struct dev_object *)drv_get_first_dev_object();
+	if (!hdev_object)
+		return;
+
+	status = dev_get_bridge_context(hdev_object, &bridge_context);
+	if (!bridge_context)
+		return;
+
+	resources = bridge_context->resources;
+	if (!resources)
+		return;
+
+	switch (clock_id) {
+	case BPWR_GP_TIMER5:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_GPT5_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_GPT5_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_GPT5_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_GPT5_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_GP_TIMER6:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_GPT6_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_GPT6_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_GPT6_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_GPT6_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_GP_TIMER7:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_GPT7_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_GPT7_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_GPT7_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_GPT7_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_GP_TIMER8:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_GPT8_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_GPT8_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_GPT8_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_GPT8_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_MCBSP1:
+		iva2_grpsel = readl(resources->dw_core_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_core_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_MCBSP1_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_MCBSP1_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_MCBSP1_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_MCBSP1_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_core_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_core_pm_base + 0xA4);
+		break;
+	case BPWR_MCBSP2:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_MCBSP2_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_MCBSP2_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_MCBSP2_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_MCBSP2_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_MCBSP3:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_MCBSP3_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_MCBSP3_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_MCBSP3_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_MCBSP3_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_MCBSP4:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_MCBSP4_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_MCBSP4_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_MCBSP4_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_MCBSP4_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	case BPWR_MCBSP5:
+		iva2_grpsel = readl(resources->dw_per_pm_base + 0xA8);
+		mpu_grpsel = readl(resources->dw_per_pm_base + 0xA4);
+		if (enable) {
+			iva2_grpsel |= OMAP3430_GRPSEL_MCBSP5_MASK;
+			mpu_grpsel &= ~OMAP3430_GRPSEL_MCBSP5_MASK;
+		} else {
+			mpu_grpsel |= OMAP3430_GRPSEL_MCBSP5_MASK;
+			iva2_grpsel &= ~OMAP3430_GRPSEL_MCBSP5_MASK;
+		}
+		writel(iva2_grpsel, resources->dw_per_pm_base + 0xA8);
+		writel(mpu_grpsel, resources->dw_per_pm_base + 0xA4);
+		break;
+	}
+}
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
new file mode 100644
index 00000000000..190c028afe9
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -0,0 +1,455 @@
+/*
+ * tiomap_io.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implementation for the io read/write routines.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/drv.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/wdt.h>
+
+/*  ----------------------------------- specific to this file */
+#include "_tiomap.h"
+#include "_tiomap_pwr.h"
+#include "tiomap_io.h"
+
+static u32 ul_ext_base;
+static u32 ul_ext_end;
+
+static u32 shm0_end;
+static u32 ul_dyn_ext_base;
+static u32 ul_trace_sec_beg;
+static u32 ul_trace_sec_end;
+static u32 ul_shm_base_virt;
+
+bool symbols_reloaded = true;
+
+/*
+ *  ======== read_ext_dsp_data ========
+ *      Copies DSP external memory buffers to the host side buffers.
+ */
+int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
+			     u8 *host_buff, u32 dsp_addr,
+			     u32 ul_num_bytes, u32 mem_type)
+{
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	u32 offset;
+	u32 ul_tlb_base_virt = 0;
+	u32 ul_shm_offset_virt = 0;
+	u32 dw_ext_prog_virt_mem;
+	u32 dw_base_addr = dev_context->dw_dsp_ext_base_addr;
+	bool trace_read = false;
+
+	if (!ul_shm_base_virt) {
+		status = dev_get_symbol(dev_context->hdev_obj,
+					SHMBASENAME, &ul_shm_base_virt);
+	}
+	DBC_ASSERT(ul_shm_base_virt != 0);
+
+	/* Check if it is a read of Trace section */
+	if (!status && !ul_trace_sec_beg) {
+		status = dev_get_symbol(dev_context->hdev_obj,
+					DSP_TRACESEC_BEG, &ul_trace_sec_beg);
+	}
+	DBC_ASSERT(ul_trace_sec_beg != 0);
+
+	if (!status && !ul_trace_sec_end) {
+		status = dev_get_symbol(dev_context->hdev_obj,
+					DSP_TRACESEC_END, &ul_trace_sec_end);
+	}
+	DBC_ASSERT(ul_trace_sec_end != 0);
+
+	if (!status) {
+		if ((dsp_addr <= ul_trace_sec_end) &&
+		    (dsp_addr >= ul_trace_sec_beg))
+			trace_read = true;
+	}
+
+	/* If reading from TRACE, force remap/unmap */
+	if (trace_read && dw_base_addr) {
+		dw_base_addr = 0;
+		dev_context->dw_dsp_ext_base_addr = 0;
+	}
+
+	if (!dw_base_addr) {
+		/* Initialize ul_ext_base and ul_ext_end */
+		ul_ext_base = 0;
+		ul_ext_end = 0;
+
+		/* Get DYNEXT_BEG, EXT_BEG and EXT_END. */
+		if (!status && !ul_dyn_ext_base) {
+			status = dev_get_symbol(dev_context->hdev_obj,
+						DYNEXTBASE, &ul_dyn_ext_base);
+		}
+		DBC_ASSERT(ul_dyn_ext_base != 0);
+
+		if (!status) {
+			status = dev_get_symbol(dev_context->hdev_obj,
+						EXTBASE, &ul_ext_base);
+		}
+		DBC_ASSERT(ul_ext_base != 0);
+
+		if (!status) {
+			status = dev_get_symbol(dev_context->hdev_obj,
+						EXTEND, &ul_ext_end);
+		}
+		DBC_ASSERT(ul_ext_end != 0);
+
+		/* Trace buffer is right after the shm SEG0,
+		 *  so set the base address to SHMBASE */
+		if (trace_read) {
+			ul_ext_base = ul_shm_base_virt;
+			ul_ext_end = ul_trace_sec_end;
+		}
+
+		DBC_ASSERT(ul_ext_end != 0);
+		DBC_ASSERT(ul_ext_end > ul_ext_base);
+
+		if (ul_ext_end < ul_ext_base)
+			status = -EPERM;
+
+		if (!status) {
+			ul_tlb_base_virt =
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
+			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
+			dw_ext_prog_virt_mem =
+			    dev_context->atlb_entry[0].ul_gpp_va;
+
+			if (!trace_read) {
+				ul_shm_offset_virt =
+				    ul_shm_base_virt - ul_tlb_base_virt;
+				ul_shm_offset_virt +=
+				    PG_ALIGN_HIGH(ul_ext_end - ul_dyn_ext_base +
+						  1, HW_PAGE_SIZE64KB);
+				dw_ext_prog_virt_mem -= ul_shm_offset_virt;
+				dw_ext_prog_virt_mem +=
+				    (ul_ext_base - ul_dyn_ext_base);
+				dev_context->dw_dsp_ext_base_addr =
+				    dw_ext_prog_virt_mem;
+
+				/*
+				 * This dw_dsp_ext_base_addr will get cleared
+				 * only when the board is stopped.
+				*/
+				if (!dev_context->dw_dsp_ext_base_addr)
+					status = -EPERM;
+			}
+
+			dw_base_addr = dw_ext_prog_virt_mem;
+		}
+	}
+
+	if (!dw_base_addr || !ul_ext_base || !ul_ext_end)
+		status = -EPERM;
+
+	offset = dsp_addr - ul_ext_base;
+
+	if (!status)
+		memcpy(host_buff, (u8 *) dw_base_addr + offset, ul_num_bytes);
+
+	return status;
+}
+
+/*
+ *  ======== write_dsp_data ========
+ *  purpose:
+ *      Copies buffers to the DSP internal/external memory.
+ */
+int write_dsp_data(struct bridge_dev_context *dev_context,
+			  u8 *host_buff, u32 dsp_addr, u32 ul_num_bytes,
+			  u32 mem_type)
+{
+	u32 offset;
+	u32 dw_base_addr = dev_context->dw_dsp_base_addr;
+	struct cfg_hostres *resources = dev_context->resources;
+	int status = 0;
+	u32 base1, base2, base3;
+	base1 = OMAP_DSP_MEM1_SIZE;
+	base2 = OMAP_DSP_MEM2_BASE - OMAP_DSP_MEM1_BASE;
+	base3 = OMAP_DSP_MEM3_BASE - OMAP_DSP_MEM1_BASE;
+
+	if (!resources)
+		return -EPERM;
+
+	offset = dsp_addr - dev_context->dw_dsp_start_add;
+	if (offset < base1) {
+		dw_base_addr = MEM_LINEAR_ADDRESS(resources->dw_mem_base[2],
+						  resources->dw_mem_length[2]);
+	} else if (offset > base1 && offset < base2 + OMAP_DSP_MEM2_SIZE) {
+		dw_base_addr = MEM_LINEAR_ADDRESS(resources->dw_mem_base[3],
+						  resources->dw_mem_length[3]);
+		offset = offset - base2;
+	} else if (offset >= base2 + OMAP_DSP_MEM2_SIZE &&
+		   offset < base3 + OMAP_DSP_MEM3_SIZE) {
+		dw_base_addr = MEM_LINEAR_ADDRESS(resources->dw_mem_base[4],
+						  resources->dw_mem_length[4]);
+		offset = offset - base3;
+	} else {
+		return -EPERM;
+	}
+	if (ul_num_bytes)
+		memcpy((u8 *) (dw_base_addr + offset), host_buff, ul_num_bytes);
+	else
+		*((u32 *) host_buff) = dw_base_addr + offset;
+
+	return status;
+}
+
+/*
+ *  ======== write_ext_dsp_data ========
+ *  purpose:
+ *      Copies buffers to the external memory.
+ *
+ */
+int write_ext_dsp_data(struct bridge_dev_context *dev_context,
+			      u8 *host_buff, u32 dsp_addr,
+			      u32 ul_num_bytes, u32 mem_type,
+			      bool dynamic_load)
+{
+	u32 dw_base_addr = dev_context->dw_dsp_ext_base_addr;
+	u32 dw_offset = 0;
+	u8 temp_byte1, temp_byte2;
+	u8 remain_byte[4];
+	s32 i;
+	int ret = 0;
+	u32 dw_ext_prog_virt_mem;
+	u32 ul_tlb_base_virt = 0;
+	u32 ul_shm_offset_virt = 0;
+	struct cfg_hostres *host_res = dev_context->resources;
+	bool trace_load = false;
+	temp_byte1 = 0x0;
+	temp_byte2 = 0x0;
+
+	if (symbols_reloaded) {
+		/* Check if it is a load to Trace section */
+		ret = dev_get_symbol(dev_context->hdev_obj,
+				     DSP_TRACESEC_BEG, &ul_trace_sec_beg);
+		if (!ret)
+			ret = dev_get_symbol(dev_context->hdev_obj,
+					     DSP_TRACESEC_END,
+					     &ul_trace_sec_end);
+	}
+	if (!ret) {
+		if ((dsp_addr <= ul_trace_sec_end) &&
+		    (dsp_addr >= ul_trace_sec_beg))
+			trace_load = true;
+	}
+
+	/* If dynamic, force remap/unmap */
+	if ((dynamic_load || trace_load) && dw_base_addr) {
+		dw_base_addr = 0;
+		MEM_UNMAP_LINEAR_ADDRESS((void *)
+					 dev_context->dw_dsp_ext_base_addr);
+		dev_context->dw_dsp_ext_base_addr = 0x0;
+	}
+	if (!dw_base_addr) {
+		if (symbols_reloaded)
+			/* Get SHM_BEG  EXT_BEG and EXT_END. */
+			ret = dev_get_symbol(dev_context->hdev_obj,
+					     SHMBASENAME, &ul_shm_base_virt);
+		DBC_ASSERT(ul_shm_base_virt != 0);
+		if (dynamic_load) {
+			if (!ret) {
+				if (symbols_reloaded)
+					ret =
+					    dev_get_symbol
+					    (dev_context->hdev_obj, DYNEXTBASE,
+					     &ul_ext_base);
+			}
+			DBC_ASSERT(ul_ext_base != 0);
+			if (!ret) {
+				/* DR  OMAPS00013235 : DLModules array may be
+				 * in EXTMEM. It is expected that DYNEXTMEM and
+				 * EXTMEM are contiguous, so checking for the
+				 * upper bound at EXTEND should be Ok. */
+				if (symbols_reloaded)
+					ret =
+					    dev_get_symbol
+					    (dev_context->hdev_obj, EXTEND,
+					     &ul_ext_end);
+			}
+		} else {
+			if (symbols_reloaded) {
+				if (!ret)
+					ret =
+					    dev_get_symbol
+					    (dev_context->hdev_obj, EXTBASE,
+					     &ul_ext_base);
+				DBC_ASSERT(ul_ext_base != 0);
+				if (!ret)
+					ret =
+					    dev_get_symbol
+					    (dev_context->hdev_obj, EXTEND,
+					     &ul_ext_end);
+			}
+		}
+		/* Trace buffer it right after the shm SEG0, so set the
+		 *      base address to SHMBASE */
+		if (trace_load)
+			ul_ext_base = ul_shm_base_virt;
+
+		DBC_ASSERT(ul_ext_end != 0);
+		DBC_ASSERT(ul_ext_end > ul_ext_base);
+		if (ul_ext_end < ul_ext_base)
+			ret = -EPERM;
+
+		if (!ret) {
+			ul_tlb_base_virt =
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
+			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
+
+			if (symbols_reloaded) {
+				ret = dev_get_symbol
+					    (dev_context->hdev_obj,
+					     DSP_TRACESEC_END, &shm0_end);
+				if (!ret) {
+					ret =
+					    dev_get_symbol
+					    (dev_context->hdev_obj, DYNEXTBASE,
+					     &ul_dyn_ext_base);
+				}
+			}
+			ul_shm_offset_virt =
+			    ul_shm_base_virt - ul_tlb_base_virt;
+			if (trace_load) {
+				dw_ext_prog_virt_mem =
+				    dev_context->atlb_entry[0].ul_gpp_va;
+			} else {
+				dw_ext_prog_virt_mem = host_res->dw_mem_base[1];
+				dw_ext_prog_virt_mem +=
+				    (ul_ext_base - ul_dyn_ext_base);
+			}
+
+			dev_context->dw_dsp_ext_base_addr =
+			    (u32) MEM_LINEAR_ADDRESS((void *)
+						     dw_ext_prog_virt_mem,
+						     ul_ext_end - ul_ext_base);
+			dw_base_addr += dev_context->dw_dsp_ext_base_addr;
+			/* This dw_dsp_ext_base_addr will get cleared only when
+			 * the board is stopped. */
+			if (!dev_context->dw_dsp_ext_base_addr)
+				ret = -EPERM;
+		}
+	}
+	if (!dw_base_addr || !ul_ext_base || !ul_ext_end)
+		ret = -EPERM;
+
+	if (!ret) {
+		for (i = 0; i < 4; i++)
+			remain_byte[i] = 0x0;
+
+		dw_offset = dsp_addr - ul_ext_base;
+		/* Also make sure the dsp_addr is < ul_ext_end */
+		if (dsp_addr > ul_ext_end || dw_offset > dsp_addr)
+			ret = -EPERM;
+	}
+	if (!ret) {
+		if (ul_num_bytes)
+			memcpy((u8 *) dw_base_addr + dw_offset, host_buff,
+			       ul_num_bytes);
+		else
+			*((u32 *) host_buff) = dw_base_addr + dw_offset;
+	}
+	/* Unmap here to force remap for other Ext loads */
+	if ((dynamic_load || trace_load) && dev_context->dw_dsp_ext_base_addr) {
+		MEM_UNMAP_LINEAR_ADDRESS((void *)
+					 dev_context->dw_dsp_ext_base_addr);
+		dev_context->dw_dsp_ext_base_addr = 0x0;
+	}
+	symbols_reloaded = false;
+	return ret;
+}
+
+int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val)
+{
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	u32 opplevel = 0;
+#endif
+	struct dspbridge_platform_data *pdata =
+		omap_dspbridge_dev->dev.platform_data;
+	struct cfg_hostres *resources = dev_context->resources;
+	int status = 0;
+	u32 temp;
+
+	if (!dev_context->mbox)
+		return 0;
+
+	if (!resources)
+		return -EPERM;
+
+	if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION ||
+	    dev_context->dw_brd_state == BRD_HIBERNATION) {
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+		if (pdata->dsp_get_opp)
+			opplevel = (*pdata->dsp_get_opp) ();
+		if (opplevel == VDD1_OPP1) {
+			if (pdata->dsp_set_min_opp)
+				(*pdata->dsp_set_min_opp) (VDD1_OPP2);
+		}
+#endif
+		/* Restart the peripheral clocks */
+		dsp_clock_enable_all(dev_context->dsp_per_clks);
+		dsp_wdt_enable(true);
+
+		/*
+		 * 2:0 AUTO_IVA2_DPLL - Enabling IVA2 DPLL auto control
+		 *     in CM_AUTOIDLE_PLL_IVA2 register
+		 */
+		(*pdata->dsp_cm_write)(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+				OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+
+		/*
+		 * 7:4 IVA2_DPLL_FREQSEL - IVA2 internal frq set to
+		 *     0.75 MHz - 1.0 MHz
+		 * 2:0 EN_IVA2_DPLL - Enable IVA2 DPLL in lock mode
+		 */
+		(*pdata->dsp_cm_rmw_bits)(OMAP3430_IVA2_DPLL_FREQSEL_MASK |
+				OMAP3430_EN_IVA2_DPLL_MASK,
+				0x3 << OMAP3430_IVA2_DPLL_FREQSEL_SHIFT |
+				0x7 << OMAP3430_EN_IVA2_DPLL_SHIFT,
+				OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL);
+
+		/* Restore mailbox settings */
+		omap_mbox_restore_ctx(dev_context->mbox);
+
+		/* Access MMU SYS CONFIG register to generate a short wakeup */
+		temp = readl(resources->dw_dmmu_base + 0x10);
+
+		dev_context->dw_brd_state = BRD_RUNNING;
+	} else if (dev_context->dw_brd_state == BRD_RETENTION) {
+		/* Restart the peripheral clocks */
+		dsp_clock_enable_all(dev_context->dsp_per_clks);
+	}
+
+	status = omap_mbox_msg_send(dev_context->mbox, mb_val);
+
+	if (status) {
+		pr_err("omap_mbox_msg_send Fail and status = %d\n", status);
+		status = -EPERM;
+	}
+
+	return 0;
+}
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.h b/drivers/staging/tidspbridge/core/tiomap_io.h
new file mode 100644
index 00000000000..a3f19c7b79f
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/tiomap_io.h
@@ -0,0 +1,104 @@
+/*
+ * tiomap_io.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definitions, types and function prototypes for the io (r/w external mem).
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _TIOMAP_IO_
+#define _TIOMAP_IO_
+
+/*
+ * Symbol that defines beginning of shared memory.
+ * For OMAP (Helen) this is the DSP Virtual base address of SDRAM.
+ * This will be used to program DSP MMU to map DSP Virt to GPP phys.
+ * (see dspMmuTlbEntry()).
+ */
+#define SHMBASENAME "SHM_BEG"
+#define EXTBASE     "EXT_BEG"
+#define EXTEND      "_EXT_END"
+#define DYNEXTBASE  "_DYNEXT_BEG"
+#define DYNEXTEND   "_DYNEXT_END"
+#define IVAEXTMEMBASE   "_IVAEXTMEM_BEG"
+#define IVAEXTMEMEND   "_IVAEXTMEM_END"
+
+#define DSP_TRACESEC_BEG  "_BRIDGE_TRACE_BEG"
+#define DSP_TRACESEC_END  "_BRIDGE_TRACE_END"
+
+#define SYS_PUTCBEG               "_SYS_PUTCBEG"
+#define SYS_PUTCEND               "_SYS_PUTCEND"
+#define BRIDGE_SYS_PUTC_CURRENT   "_BRIDGE_SYS_PUTC_current"
+
+#define WORDSWAP_ENABLE 0x3	/* Enable word swap */
+
+/*
+ *  ======== read_ext_dsp_data ========
+ *  Reads it from DSP External memory. The external memory for the DSP
+ * is configured by the combination of DSP MMU and shm Memory manager in the CDB
+ */
+extern int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
+				    u8 *host_buff, u32 dsp_addr,
+				    u32 ul_num_bytes, u32 mem_type);
+
+/*
+ *  ======== write_dsp_data ========
+ */
+extern int write_dsp_data(struct bridge_dev_context *dev_context,
+				 u8 *host_buff, u32 dsp_addr,
+				 u32 ul_num_bytes, u32 mem_type);
+
+/*
+ *  ======== write_ext_dsp_data ========
+ *  Writes to the DSP External memory for external program.
+ *  The ext mem for progra is configured by the combination of DSP MMU and
+ *  shm Memory manager in the CDB
+ */
+extern int write_ext_dsp_data(struct bridge_dev_context *dev_context,
+				     u8 *host_buff, u32 dsp_addr,
+				     u32 ul_num_bytes, u32 mem_type,
+				     bool dynamic_load);
+
+/*
+ * ======== write_ext32_bit_dsp_data ========
+ * Writes 32 bit data to the external memory
+ */
+extern inline void write_ext32_bit_dsp_data(const
+					struct bridge_dev_context *dev_context,
+					u32 dsp_addr, u32 val)
+{
+	*(u32 *) dsp_addr = ((dev_context->tc_word_swap_on) ? (((val << 16) &
+								 0xFFFF0000) |
+								((val >> 16) &
+								 0x0000FFFF)) :
+			      val);
+}
+
+/*
+ * ======== read_ext32_bit_dsp_data ========
+ * Reads 32 bit data from the external memory
+ */
+extern inline u32 read_ext32_bit_dsp_data(const struct bridge_dev_context
+					  *dev_context, u32 dsp_addr)
+{
+	u32 ret;
+	ret = *(u32 *) dsp_addr;
+
+	ret = ((dev_context->tc_word_swap_on) ? (((ret << 16)
+						  & 0xFFFF0000) | ((ret >> 16) &
+								   0x0000FFFF))
+	       : ret);
+	return ret;
+}
+
+#endif /* _TIOMAP_IO_ */
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
new file mode 100644
index 00000000000..3430418190d
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -0,0 +1,273 @@
+/*
+ * ue_deh.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implements upper edge DSP exception handling (DEH) functions.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2010 Felipe Contreras
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <plat/dmtimer.h>
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/dspdeh.h>
+#include <dspbridge/dev.h>
+#include "_tiomap.h"
+#include "_deh.h"
+
+#include <dspbridge/io_sm.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/wdt.h>
+
+static u32 fault_addr;
+
+static void mmu_fault_dpc(unsigned long data)
+{
+	struct deh_mgr *deh = (void *)data;
+
+	if (!deh)
+		return;
+
+	bridge_deh_notify(deh, DSP_MMUFAULT, 0);
+}
+
+static irqreturn_t mmu_fault_isr(int irq, void *data)
+{
+	struct deh_mgr *deh = data;
+	struct cfg_hostres *resources;
+	u32 event;
+
+	if (!deh)
+		return IRQ_HANDLED;
+
+	resources = deh->hbridge_context->resources;
+	if (!resources) {
+		dev_dbg(bridge, "%s: Failed to get Host Resources\n",
+				__func__);
+		return IRQ_HANDLED;
+	}
+
+	hw_mmu_event_status(resources->dw_dmmu_base, &event);
+	if (event == HW_MMU_TRANSLATION_FAULT) {
+		hw_mmu_fault_addr_read(resources->dw_dmmu_base, &fault_addr);
+		dev_dbg(bridge, "%s: event=0x%x, fault_addr=0x%x\n", __func__,
+				event, fault_addr);
+		/*
+		 * Schedule a DPC directly. In the future, it may be
+		 * necessary to check if DSP MMU fault is intended for
+		 * Bridge.
+		 */
+		tasklet_schedule(&deh->dpc_tasklet);
+
+		/* Disable the MMU events, else once we clear it will
+		 * start to raise INTs again */
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_TRANSLATION_FAULT);
+	} else {
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_ALL_INTERRUPTS);
+	}
+	return IRQ_HANDLED;
+}
+
+int bridge_deh_create(struct deh_mgr **ret_deh,
+		struct dev_object *hdev_obj)
+{
+	int status;
+	struct deh_mgr *deh;
+	struct bridge_dev_context *hbridge_context = NULL;
+
+	/*  Message manager will be created when a file is loaded, since
+	 *  size of message buffer in shared memory is configurable in
+	 *  the base image. */
+	/* Get Bridge context info. */
+	dev_get_bridge_context(hdev_obj, &hbridge_context);
+	/* Allocate IO manager object: */
+	deh = kzalloc(sizeof(*deh), GFP_KERNEL);
+	if (!deh) {
+		status = -ENOMEM;
+		goto err;
+	}
+
+	/* Create an NTFY object to manage notifications */
+	deh->ntfy_obj = kmalloc(sizeof(struct ntfy_object), GFP_KERNEL);
+	if (!deh->ntfy_obj) {
+		status = -ENOMEM;
+		goto err;
+	}
+	ntfy_init(deh->ntfy_obj);
+
+	/* Create a MMUfault DPC */
+	tasklet_init(&deh->dpc_tasklet, mmu_fault_dpc, (u32) deh);
+
+	/* Fill in context structure */
+	deh->hbridge_context = hbridge_context;
+
+	/* Install ISR function for DSP MMU fault */
+	status = request_irq(INT_DSP_MMU_IRQ, mmu_fault_isr, 0,
+			"DspBridge\tiommu fault", deh);
+	if (status < 0)
+		goto err;
+
+	*ret_deh = deh;
+	return 0;
+
+err:
+	bridge_deh_destroy(deh);
+	*ret_deh = NULL;
+	return status;
+}
+
+int bridge_deh_destroy(struct deh_mgr *deh)
+{
+	if (!deh)
+		return -EFAULT;
+
+	/* If notification object exists, delete it */
+	if (deh->ntfy_obj) {
+		ntfy_delete(deh->ntfy_obj);
+		kfree(deh->ntfy_obj);
+	}
+	/* Disable DSP MMU fault */
+	free_irq(INT_DSP_MMU_IRQ, deh);
+
+	/* Free DPC object */
+	tasklet_kill(&deh->dpc_tasklet);
+
+	/* Deallocate the DEH manager object */
+	kfree(deh);
+
+	return 0;
+}
+
+int bridge_deh_register_notify(struct deh_mgr *deh, u32 event_mask,
+		u32 notify_type,
+		struct dsp_notification *hnotification)
+{
+	if (!deh)
+		return -EFAULT;
+
+	if (event_mask)
+		return ntfy_register(deh->ntfy_obj, hnotification,
+				event_mask, notify_type);
+	else
+		return ntfy_unregister(deh->ntfy_obj, hnotification);
+}
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
+{
+	struct cfg_hostres *resources;
+	struct hw_mmu_map_attrs_t map_attrs = {
+		.endianism = HW_LITTLE_ENDIAN,
+		.element_size = HW_ELEM_SIZE16BIT,
+		.mixed_size = HW_MMU_CPUES,
+	};
+	void *dummy_va_addr;
+
+	resources = dev_context->resources;
+	dummy_va_addr = (void*)__get_free_page(GFP_ATOMIC);
+
+	/*
+	 * Before acking the MMU fault, let's make sure MMU can only
+	 * access entry #0. Then add a new entry so that the DSP OS
+	 * can continue in order to dump the stack.
+	 */
+	hw_mmu_twl_disable(resources->dw_dmmu_base);
+	hw_mmu_tlb_flush_all(resources->dw_dmmu_base);
+
+	hw_mmu_tlb_add(resources->dw_dmmu_base,
+			virt_to_phys(dummy_va_addr), fault_addr,
+			HW_PAGE_SIZE4KB, 1,
+			&map_attrs, HW_SET, HW_SET);
+
+	dsp_clk_enable(DSP_CLK_GPT8);
+
+	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
+
+	/* Clear MMU interrupt */
+	hw_mmu_event_ack(resources->dw_dmmu_base,
+			HW_MMU_TRANSLATION_FAULT);
+	dump_dsp_stack(dev_context);
+	dsp_clk_disable(DSP_CLK_GPT8);
+
+	hw_mmu_disable(resources->dw_dmmu_base);
+	free_page((unsigned long)dummy_va_addr);
+}
+#endif
+
+static inline const char *event_to_string(int event)
+{
+	switch (event) {
+	case DSP_SYSERROR: return "DSP_SYSERROR"; break;
+	case DSP_MMUFAULT: return "DSP_MMUFAULT"; break;
+	case DSP_PWRERROR: return "DSP_PWRERROR"; break;
+	case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break;
+	default: return "unkown event"; break;
+	}
+}
+
+void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
+{
+	struct bridge_dev_context *dev_context;
+	const char *str = event_to_string(event);
+
+	if (!deh)
+		return;
+
+	dev_dbg(bridge, "%s: device exception", __func__);
+	dev_context = deh->hbridge_context;
+
+	switch (event) {
+	case DSP_SYSERROR:
+		dev_err(bridge, "%s: %s, info=0x%x", __func__,
+				str, info);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+		dump_dl_modules(dev_context);
+		dump_dsp_stack(dev_context);
+#endif
+		break;
+	case DSP_MMUFAULT:
+		dev_err(bridge, "%s: %s, addr=0x%x", __func__,
+				str, fault_addr);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+		print_dsp_trace_buffer(dev_context);
+		dump_dl_modules(dev_context);
+		mmu_fault_print_stack(dev_context);
+#endif
+		break;
+	default:
+		dev_err(bridge, "%s: %s", __func__, str);
+		break;
+	}
+
+	/* Filter subsequent notifications when an error occurs */
+	if (dev_context->dw_brd_state != BRD_ERROR) {
+		ntfy_notify(deh->ntfy_obj, event);
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+		bridge_recover_schedule();
+#endif
+	}
+
+	/* Set the Board state as ERROR */
+	dev_context->dw_brd_state = BRD_ERROR;
+	/* Disable all the clocks that were enabled by DSP */
+	dsp_clock_disable_all(dev_context->dsp_per_clks);
+	/*
+	 * Avoid the subsequent WDT if it happens once,
+	 * also if fatal error occurs.
+	 */
+	dsp_wdt_enable(false);
+}
diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c
new file mode 100644
index 00000000000..2126f597753
--- /dev/null
+++ b/drivers/staging/tidspbridge/core/wdt.c
@@ -0,0 +1,150 @@
+/*
+ * wdt.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * IO dispatcher for a shared memory channel driver.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/dspdeh.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/_chnl_sm.h>
+#include <dspbridge/wdt.h>
+#include <dspbridge/host_os.h>
+
+
+#ifdef CONFIG_TIDSPBRIDGE_WDT3
+
+#define OMAP34XX_WDT3_BASE 		(L4_PER_34XX_BASE + 0x30000)
+
+static struct dsp_wdt_setting dsp_wdt;
+
+void dsp_wdt_dpc(unsigned long data)
+{
+	struct deh_mgr *deh_mgr;
+	dev_get_deh_mgr(dev_get_first(), &deh_mgr);
+	if (deh_mgr)
+		bridge_deh_notify(deh_mgr, DSP_WDTOVERFLOW, 0);
+}
+
+irqreturn_t dsp_wdt_isr(int irq, void *data)
+{
+	u32 value;
+	/* ack wdt3 interrupt */
+	value = __raw_readl(dsp_wdt.reg_base + OMAP3_WDT3_ISR_OFFSET);
+	__raw_writel(value, dsp_wdt.reg_base + OMAP3_WDT3_ISR_OFFSET);
+
+	tasklet_schedule(&dsp_wdt.wdt3_tasklet);
+	return IRQ_HANDLED;
+}
+
+int dsp_wdt_init(void)
+{
+	int ret = 0;
+
+	dsp_wdt.sm_wdt = NULL;
+	dsp_wdt.reg_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_WDT3_BASE);
+	tasklet_init(&dsp_wdt.wdt3_tasklet, dsp_wdt_dpc, 0);
+
+	dsp_wdt.fclk = clk_get(NULL, "wdt3_fck");
+
+	if (dsp_wdt.fclk) {
+		dsp_wdt.iclk = clk_get(NULL, "wdt3_ick");
+		if (!dsp_wdt.iclk) {
+			clk_put(dsp_wdt.fclk);
+			dsp_wdt.fclk = NULL;
+			ret = -EFAULT;
+		}
+	} else
+		ret = -EFAULT;
+
+	if (!ret)
+		ret = request_irq(INT_34XX_WDT3_IRQ, dsp_wdt_isr, 0,
+							"dsp_wdt", &dsp_wdt);
+
+	/* Disable at this moment, it will be enabled when DSP starts */
+	if (!ret)
+		disable_irq(INT_34XX_WDT3_IRQ);
+
+	return ret;
+}
+
+void dsp_wdt_sm_set(void *data)
+{
+	dsp_wdt.sm_wdt = data;
+	dsp_wdt.sm_wdt->wdt_overflow = CONFIG_TIDSPBRIDGE_WDT_TIMEOUT;
+}
+
+
+void dsp_wdt_exit(void)
+{
+	free_irq(INT_34XX_WDT3_IRQ, &dsp_wdt);
+	tasklet_kill(&dsp_wdt.wdt3_tasklet);
+
+	if (dsp_wdt.fclk)
+		clk_put(dsp_wdt.fclk);
+	if (dsp_wdt.iclk)
+		clk_put(dsp_wdt.iclk);
+
+	dsp_wdt.fclk = NULL;
+	dsp_wdt.iclk = NULL;
+	dsp_wdt.sm_wdt = NULL;
+	dsp_wdt.reg_base = NULL;
+}
+
+void dsp_wdt_enable(bool enable)
+{
+	u32 tmp;
+	static bool wdt_enable;
+
+	if (wdt_enable == enable || !dsp_wdt.fclk || !dsp_wdt.iclk)
+		return;
+
+	wdt_enable = enable;
+
+	if (enable) {
+		clk_enable(dsp_wdt.fclk);
+		clk_enable(dsp_wdt.iclk);
+		dsp_wdt.sm_wdt->wdt_setclocks = 1;
+		tmp = __raw_readl(dsp_wdt.reg_base + OMAP3_WDT3_ISR_OFFSET);
+		__raw_writel(tmp, dsp_wdt.reg_base + OMAP3_WDT3_ISR_OFFSET);
+		enable_irq(INT_34XX_WDT3_IRQ);
+	} else {
+		disable_irq(INT_34XX_WDT3_IRQ);
+		dsp_wdt.sm_wdt->wdt_setclocks = 0;
+		clk_disable(dsp_wdt.iclk);
+		clk_disable(dsp_wdt.fclk);
+	}
+}
+
+#else
+void dsp_wdt_enable(bool enable)
+{
+}
+
+void dsp_wdt_sm_set(void *data)
+{
+}
+
+int dsp_wdt_init(void)
+{
+	return 0;
+}
+
+void dsp_wdt_exit(void)
+{
+}
+#endif
+
diff --git a/drivers/staging/tidspbridge/dynload/cload.c b/drivers/staging/tidspbridge/dynload/cload.c
new file mode 100644
index 00000000000..c85a5e88361
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/cload.c
@@ -0,0 +1,1953 @@
+/*
+ * cload.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "header.h"
+
+#include "module_list.h"
+#define LINKER_MODULES_HEADER ("_" MODULES_HEADER)
+
+/*
+ * forward references
+ */
+static void dload_symbols(struct dload_state *dlthis);
+static void dload_data(struct dload_state *dlthis);
+static void allocate_sections(struct dload_state *dlthis);
+static void string_table_free(struct dload_state *dlthis);
+static void symbol_table_free(struct dload_state *dlthis);
+static void section_table_free(struct dload_state *dlthis);
+static void init_module_handle(struct dload_state *dlthis);
+#if BITS_PER_AU > BITS_PER_BYTE
+static char *unpack_name(struct dload_state *dlthis, u32 soffset);
+#endif
+
+static const char cinitname[] = { ".cinit" };
+static const char loader_dllview_root[] = { "?DLModules?" };
+
+/*
+ * Error strings
+ */
+static const char readstrm[] = { "Error reading %s from input stream" };
+static const char err_alloc[] = { "Syms->dload_allocate( %d ) failed" };
+static const char tgtalloc[] = {
+	"Target memory allocate failed, section %s size " FMT_UI32 };
+static const char initfail[] = { "%s to target address " FMT_UI32 " failed" };
+static const char dlvwrite[] = { "Write to DLLview list failed" };
+static const char iconnect[] = { "Connect call to init interface failed" };
+static const char err_checksum[] = { "Checksum failed on %s" };
+
+/*************************************************************************
+ * Procedure dload_error
+ *
+ * Parameters:
+ *	errtxt	description of the error, printf style
+ *	...		additional information
+ *
+ * Effect:
+ *	Reports or records the error as appropriate.
+ *********************************************************************** */
+void dload_error(struct dload_state *dlthis, const char *errtxt, ...)
+{
+	va_list args;
+
+	va_start(args, errtxt);
+	dlthis->mysym->error_report(dlthis->mysym, errtxt, args);
+	va_end(args);
+	dlthis->dload_errcount += 1;
+
+}				/* dload_error */
+
+#define DL_ERROR(zza, zzb) dload_error(dlthis, zza, zzb)
+
+/*************************************************************************
+ * Procedure dload_syms_error
+ *
+ * Parameters:
+ *	errtxt	description of the error, printf style
+ *	...		additional information
+ *
+ * Effect:
+ *	Reports or records the error as appropriate.
+ *********************************************************************** */
+void dload_syms_error(struct dynamic_loader_sym *syms, const char *errtxt, ...)
+{
+	va_list args;
+
+	va_start(args, errtxt);
+	syms->error_report(syms, errtxt, args);
+	va_end(args);
+}
+
+/*************************************************************************
+ * Procedure dynamic_load_module
+ *
+ * Parameters:
+ *	module	The input stream that supplies the module image
+ *	syms	Host-side symbol table and malloc/free functions
+ *	alloc	Target-side memory allocation
+ *	init	Target-side memory initialization
+ *	options	Option flags DLOAD_*
+ *	mhandle	A module handle for use with Dynamic_Unload
+ *
+ * Effect:
+ *	The module image is read using *module.  Target storage for the new
+ *	image is
+ * obtained from *alloc.  Symbols defined and referenced by the module are
+ * managed using *syms.  The image is then relocated and references
+ *	resolved as necessary, and the resulting executable bits are placed
+ *	into target memory using *init.
+ *
+ * Returns:
+ *	On a successful load, a module handle is placed in *mhandle,
+ *	and zero is returned.  On error, the number of errors detected is
+ *	returned.  Individual errors are reported during the load process
+ *	using syms->error_report().
+ ********************************************************************** */
+int dynamic_load_module(struct dynamic_loader_stream *module,
+			struct dynamic_loader_sym *syms,
+			struct dynamic_loader_allocate *alloc,
+			struct dynamic_loader_initialize *init,
+			unsigned options, void **mhandle)
+{
+	register unsigned *dp, sz;
+	struct dload_state dl_state;	/* internal state for this call */
+
+	/* blast our internal state */
+	dp = (unsigned *)&dl_state;
+	for (sz = sizeof(dl_state) / sizeof(unsigned); sz > 0; sz -= 1)
+		*dp++ = 0;
+
+	/* Enable _only_ BSS initialization if enabled by user */
+	if ((options & DLOAD_INITBSS) == DLOAD_INITBSS)
+		dl_state.myoptions = DLOAD_INITBSS;
+
+	/* Check that mandatory arguments are present */
+	if (!module || !syms) {
+		dload_error(&dl_state, "Required parameter is NULL");
+	} else {
+		dl_state.strm = module;
+		dl_state.mysym = syms;
+		dload_headers(&dl_state);
+		if (!dl_state.dload_errcount)
+			dload_strings(&dl_state, false);
+		if (!dl_state.dload_errcount)
+			dload_sections(&dl_state);
+
+		if (init && !dl_state.dload_errcount) {
+			if (init->connect(init)) {
+				dl_state.myio = init;
+				dl_state.myalloc = alloc;
+				/* do now, before reducing symbols */
+				allocate_sections(&dl_state);
+			} else
+				dload_error(&dl_state, iconnect);
+		}
+
+		if (!dl_state.dload_errcount) {
+			/* fix up entry point address */
+			unsigned sref = dl_state.dfile_hdr.df_entry_secn - 1;
+			if (sref < dl_state.allocated_secn_count)
+				dl_state.dfile_hdr.df_entrypt +=
+				    dl_state.ldr_sections[sref].run_addr;
+
+			dload_symbols(&dl_state);
+		}
+
+		if (init && !dl_state.dload_errcount)
+			dload_data(&dl_state);
+
+		init_module_handle(&dl_state);
+
+		/* dl_state.myio is init or 0 at this point. */
+		if (dl_state.myio) {
+			if ((!dl_state.dload_errcount) &&
+			    (dl_state.dfile_hdr.df_entry_secn != DN_UNDEF) &&
+			    (!init->execute(init,
+					    dl_state.dfile_hdr.df_entrypt)))
+				dload_error(&dl_state, "Init->Execute Failed");
+			init->release(init);
+		}
+
+		symbol_table_free(&dl_state);
+		section_table_free(&dl_state);
+		string_table_free(&dl_state);
+		dload_tramp_cleanup(&dl_state);
+
+		if (dl_state.dload_errcount) {
+			dynamic_unload_module(dl_state.myhandle, syms, alloc,
+					      init);
+			dl_state.myhandle = NULL;
+		}
+	}
+
+	if (mhandle)
+		*mhandle = dl_state.myhandle;	/* give back the handle */
+
+	return dl_state.dload_errcount;
+}				/* DLOAD_File */
+
+/*************************************************************************
+ * Procedure dynamic_open_module
+ *
+ * Parameters:
+ *      module  The input stream that supplies the module image
+ *      syms    Host-side symbol table and malloc/free functions
+ *      alloc   Target-side memory allocation
+ *      init    Target-side memory initialization
+ *      options Option flags DLOAD_*
+ *      mhandle A module handle for use with Dynamic_Unload
+ *
+ * Effect:
+ *      The module image is read using *module.  Target storage for the new
+ *      image is
+ * 	obtained from *alloc.  Symbols defined and referenced by the module are
+ * 	managed using *syms.  The image is then relocated and references
+ *      resolved as necessary, and the resulting executable bits are placed
+ *      into target memory using *init.
+ *
+ * Returns:
+ *      On a successful load, a module handle is placed in *mhandle,
+ *      and zero is returned.  On error, the number of errors detected is
+ *      returned.  Individual errors are reported during the load process
+ *      using syms->error_report().
+ ********************************************************************** */
+int
+dynamic_open_module(struct dynamic_loader_stream *module,
+		    struct dynamic_loader_sym *syms,
+		    struct dynamic_loader_allocate *alloc,
+		    struct dynamic_loader_initialize *init,
+		    unsigned options, void **mhandle)
+{
+	register unsigned *dp, sz;
+	struct dload_state dl_state;	/* internal state for this call */
+
+	/* blast our internal state */
+	dp = (unsigned *)&dl_state;
+	for (sz = sizeof(dl_state) / sizeof(unsigned); sz > 0; sz -= 1)
+		*dp++ = 0;
+
+	/* Enable _only_ BSS initialization if enabled by user */
+	if ((options & DLOAD_INITBSS) == DLOAD_INITBSS)
+		dl_state.myoptions = DLOAD_INITBSS;
+
+	/* Check that mandatory arguments are present */
+	if (!module || !syms) {
+		dload_error(&dl_state, "Required parameter is NULL");
+	} else {
+		dl_state.strm = module;
+		dl_state.mysym = syms;
+		dload_headers(&dl_state);
+		if (!dl_state.dload_errcount)
+			dload_strings(&dl_state, false);
+		if (!dl_state.dload_errcount)
+			dload_sections(&dl_state);
+
+		if (init && !dl_state.dload_errcount) {
+			if (init->connect(init)) {
+				dl_state.myio = init;
+				dl_state.myalloc = alloc;
+				/* do now, before reducing symbols */
+				allocate_sections(&dl_state);
+			} else
+				dload_error(&dl_state, iconnect);
+		}
+
+		if (!dl_state.dload_errcount) {
+			/* fix up entry point address */
+			unsigned sref = dl_state.dfile_hdr.df_entry_secn - 1;
+			if (sref < dl_state.allocated_secn_count)
+				dl_state.dfile_hdr.df_entrypt +=
+				    dl_state.ldr_sections[sref].run_addr;
+
+			dload_symbols(&dl_state);
+		}
+
+		init_module_handle(&dl_state);
+
+		/* dl_state.myio is either 0 or init at this point. */
+		if (dl_state.myio) {
+			if ((!dl_state.dload_errcount) &&
+			    (dl_state.dfile_hdr.df_entry_secn != DN_UNDEF) &&
+			    (!init->execute(init,
+					    dl_state.dfile_hdr.df_entrypt)))
+				dload_error(&dl_state, "Init->Execute Failed");
+			init->release(init);
+		}
+
+		symbol_table_free(&dl_state);
+		section_table_free(&dl_state);
+		string_table_free(&dl_state);
+
+		if (dl_state.dload_errcount) {
+			dynamic_unload_module(dl_state.myhandle, syms, alloc,
+					      init);
+			dl_state.myhandle = NULL;
+		}
+	}
+
+	if (mhandle)
+		*mhandle = dl_state.myhandle;	/* give back the handle */
+
+	return dl_state.dload_errcount;
+}				/* DLOAD_File */
+
+/*************************************************************************
+ * Procedure dload_headers
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Loads the DOFF header and verify record.  Deals with any byte-order
+ * issues and checks them for validity.
+ *********************************************************************** */
+#define COMBINED_HEADER_SIZE (sizeof(struct doff_filehdr_t)+ \
+			     sizeof(struct doff_verify_rec_t))
+
+void dload_headers(struct dload_state *dlthis)
+{
+	u32 map;
+
+	/* Read the header and the verify record as one.  If we don't get it
+	   all, we're done */
+	if (dlthis->strm->read_buffer(dlthis->strm, &dlthis->dfile_hdr,
+				      COMBINED_HEADER_SIZE) !=
+	    COMBINED_HEADER_SIZE) {
+		DL_ERROR(readstrm, "File Headers");
+		return;
+	}
+	/*
+	 * Verify that we have the byte order of the file correct.
+	 * If not, must fix it before we can continue
+	 */
+	map = REORDER_MAP(dlthis->dfile_hdr.df_byte_reshuffle);
+	if (map != REORDER_MAP(BYTE_RESHUFFLE_VALUE)) {
+		/* input is either byte-shuffled or bad */
+		if ((map & 0xFCFCFCFC) == 0) {	/* no obviously bogus bits */
+			dload_reorder(&dlthis->dfile_hdr, COMBINED_HEADER_SIZE,
+				      map);
+		}
+		if (dlthis->dfile_hdr.df_byte_reshuffle !=
+		    BYTE_RESHUFFLE_VALUE) {
+			/* didn't fix the problem, the byte swap map is bad */
+			dload_error(dlthis,
+				    "Bad byte swap map " FMT_UI32 " in header",
+				    dlthis->dfile_hdr.df_byte_reshuffle);
+			return;
+		}
+		dlthis->reorder_map = map;	/* keep map for future use */
+	}
+
+	/*
+	 * Verify checksum of header and verify record
+	 */
+	if (~dload_checksum(&dlthis->dfile_hdr,
+			    sizeof(struct doff_filehdr_t)) ||
+	    ~dload_checksum(&dlthis->verify,
+			    sizeof(struct doff_verify_rec_t))) {
+		DL_ERROR(err_checksum, "header or verify record");
+		return;
+	}
+#if HOST_ENDIANNESS
+	dlthis->dfile_hdr.df_byte_reshuffle = map;	/* put back for later */
+#endif
+
+	/* Check for valid target ID */
+	if ((dlthis->dfile_hdr.df_target_id != TARGET_ID) &&
+	    -(dlthis->dfile_hdr.df_target_id != TMS470_ID)) {
+		dload_error(dlthis, "Bad target ID 0x%x and TARGET_ID 0x%x",
+			    dlthis->dfile_hdr.df_target_id, TARGET_ID);
+		return;
+	}
+	/* Check for valid file format */
+	if ((dlthis->dfile_hdr.df_doff_version != DOFF0)) {
+		dload_error(dlthis, "Bad DOFF version 0x%x",
+			    dlthis->dfile_hdr.df_doff_version);
+		return;
+	}
+
+	/*
+	 * Apply reasonableness checks to count fields
+	 */
+	if (dlthis->dfile_hdr.df_strtab_size > MAX_REASONABLE_STRINGTAB) {
+		dload_error(dlthis, "Excessive string table size " FMT_UI32,
+			    dlthis->dfile_hdr.df_strtab_size);
+		return;
+	}
+	if (dlthis->dfile_hdr.df_no_scns > MAX_REASONABLE_SECTIONS) {
+		dload_error(dlthis, "Excessive section count 0x%x",
+			    dlthis->dfile_hdr.df_no_scns);
+		return;
+	}
+#ifndef TARGET_ENDIANNESS
+	/*
+	 * Check that endianness does not disagree with explicit specification
+	 */
+	if ((dlthis->dfile_hdr.df_flags >> ALIGN_COFF_ENDIANNESS) &
+	    dlthis->myoptions & ENDIANNESS_MASK) {
+		dload_error(dlthis,
+			    "Input endianness disagrees with specified option");
+		return;
+	}
+	dlthis->big_e_target = dlthis->dfile_hdr.df_flags & DF_BIG;
+#endif
+
+}				/* dload_headers */
+
+/*	COFF Section Processing
+ *
+ *	COFF sections are read in and retained intact.  Each record is embedded
+ * 	in a new structure that records the updated load and
+ * 	run addresses of the section */
+
+static const char secn_errid[] = { "section" };
+
+/*************************************************************************
+ * Procedure dload_sections
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Loads the section records into an internal table.
+ *********************************************************************** */
+void dload_sections(struct dload_state *dlthis)
+{
+	s16 siz;
+	struct doff_scnhdr_t *shp;
+	unsigned nsecs = dlthis->dfile_hdr.df_no_scns;
+
+	/* allocate space for the DOFF section records */
+	siz = nsecs * sizeof(struct doff_scnhdr_t);
+	shp =
+	    (struct doff_scnhdr_t *)dlthis->mysym->dload_allocate(dlthis->mysym,
+								  siz);
+	if (!shp) {		/* not enough storage */
+		DL_ERROR(err_alloc, siz);
+		return;
+	}
+	dlthis->sect_hdrs = shp;
+
+	/* read in the section records */
+	if (dlthis->strm->read_buffer(dlthis->strm, shp, siz) != siz) {
+		DL_ERROR(readstrm, secn_errid);
+		return;
+	}
+
+	/* if we need to fix up byte order, do it now */
+	if (dlthis->reorder_map)
+		dload_reorder(shp, siz, dlthis->reorder_map);
+
+	/* check for validity */
+	if (~dload_checksum(dlthis->sect_hdrs, siz) !=
+	    dlthis->verify.dv_scn_rec_checksum) {
+		DL_ERROR(err_checksum, secn_errid);
+		return;
+	}
+
+}				/* dload_sections */
+
+/*****************************************************************************
+ * Procedure allocate_sections
+ *
+ * Parameters:
+ *	alloc	target memory allocator class
+ *
+ * Effect:
+ *	Assigns new (target) addresses for sections
+ **************************************************************************** */
+static void allocate_sections(struct dload_state *dlthis)
+{
+	u16 curr_sect, nsecs, siz;
+	struct doff_scnhdr_t *shp;
+	struct ldr_section_info *asecs;
+	struct my_handle *hndl;
+	nsecs = dlthis->dfile_hdr.df_no_scns;
+	if (!nsecs)
+		return;
+	if ((dlthis->myalloc == NULL) &&
+	    (dlthis->dfile_hdr.df_target_scns > 0)) {
+		DL_ERROR("Arg 3 (alloc) required but NULL", 0);
+		return;
+	}
+	/*
+	 * allocate space for the module handle, which we will keep for unload
+	 * purposes include an additional section store for an auto-generated
+	 * trampoline section in case we need it.
+	 */
+	siz = (dlthis->dfile_hdr.df_target_scns + 1) *
+	    sizeof(struct ldr_section_info) + MY_HANDLE_SIZE;
+
+	hndl =
+	    (struct my_handle *)dlthis->mysym->dload_allocate(dlthis->mysym,
+							      siz);
+	if (!hndl) {		/* not enough storage */
+		DL_ERROR(err_alloc, siz);
+		return;
+	}
+	/* initialize the handle header */
+	hndl->dm.hnext = hndl->dm.hprev = hndl;	/* circular list */
+	hndl->dm.hroot = NULL;
+	hndl->dm.dbthis = 0;
+	dlthis->myhandle = hndl;	/* save away for return */
+	/* pointer to the section list of allocated sections */
+	dlthis->ldr_sections = asecs = hndl->secns;
+	/* * Insert names into all sections, make copies of
+	   the sections we allocate */
+	shp = dlthis->sect_hdrs;
+	for (curr_sect = 0; curr_sect < nsecs; curr_sect++) {
+		u32 soffset = shp->ds_offset;
+#if BITS_PER_AU <= BITS_PER_BYTE
+		/* attempt to insert the name of this section */
+		if (soffset < dlthis->dfile_hdr.df_strtab_size)
+			((struct ldr_section_info *)shp)->name =
+				dlthis->str_head + soffset;
+		else {
+			dload_error(dlthis, "Bad name offset in section %d",
+				    curr_sect);
+			((struct ldr_section_info *)shp)->name = NULL;
+		}
+#endif
+		/* allocate target storage for sections that require it */
+		if (ds_needs_allocation(shp)) {
+			*asecs = *(struct ldr_section_info *)shp;
+			asecs->context = 0;	/* zero the context field */
+#if BITS_PER_AU > BITS_PER_BYTE
+			asecs->name = unpack_name(dlthis, soffset);
+			dlthis->debug_string_size = soffset + dlthis->temp_len;
+#else
+			dlthis->debug_string_size = soffset;
+#endif
+			if (dlthis->myalloc != NULL) {
+				if (!dlthis->myalloc->
+				    dload_allocate(dlthis->myalloc, asecs,
+						   ds_alignment(asecs->type))) {
+					dload_error(dlthis, tgtalloc,
+						    asecs->name, asecs->size);
+					return;
+				}
+			}
+			/* keep address deltas in original section table */
+			shp->ds_vaddr = asecs->load_addr - shp->ds_vaddr;
+			shp->ds_paddr = asecs->run_addr - shp->ds_paddr;
+			dlthis->allocated_secn_count += 1;
+		}		/* allocate target storage */
+		shp += 1;
+		asecs += 1;
+	}
+#if BITS_PER_AU <= BITS_PER_BYTE
+	dlthis->debug_string_size +=
+	    strlen(dlthis->str_head + dlthis->debug_string_size) + 1;
+#endif
+}				/* allocate sections */
+
+/*************************************************************************
+ * Procedure section_table_free
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Frees any state used by the symbol table.
+ *
+ * WARNING:
+ *	This routine is not allowed to declare errors!
+ *********************************************************************** */
+static void section_table_free(struct dload_state *dlthis)
+{
+	struct doff_scnhdr_t *shp;
+
+	shp = dlthis->sect_hdrs;
+	if (shp)
+		dlthis->mysym->dload_deallocate(dlthis->mysym, shp);
+
+}				/* section_table_free */
+
+/*************************************************************************
+ * Procedure dload_strings
+ *
+ * Parameters:
+ *  sec_names_only   If true only read in the "section names"
+ *		     portion of the string table
+ *
+ * Effect:
+ *	Loads the DOFF string table into memory. DOFF keeps all strings in a
+ * big unsorted array.  We just read that array into memory in bulk.
+ *********************************************************************** */
+static const char stringtbl[] = { "string table" };
+
+void dload_strings(struct dload_state *dlthis, bool sec_names_only)
+{
+	u32 ssiz;
+	char *strbuf;
+
+	if (sec_names_only) {
+		ssiz = BYTE_TO_HOST(DOFF_ALIGN
+				    (dlthis->dfile_hdr.df_scn_name_size));
+	} else {
+		ssiz = BYTE_TO_HOST(DOFF_ALIGN
+				    (dlthis->dfile_hdr.df_strtab_size));
+	}
+	if (ssiz == 0)
+		return;
+
+	/* get some memory for the string table */
+#if BITS_PER_AU > BITS_PER_BYTE
+	strbuf = (char *)dlthis->mysym->dload_allocate(dlthis->mysym, ssiz +
+						       dlthis->dfile_hdr.
+						       df_max_str_len);
+#else
+	strbuf = (char *)dlthis->mysym->dload_allocate(dlthis->mysym, ssiz);
+#endif
+	if (strbuf == NULL) {
+		DL_ERROR(err_alloc, ssiz);
+		return;
+	}
+	dlthis->str_head = strbuf;
+#if BITS_PER_AU > BITS_PER_BYTE
+	dlthis->str_temp = strbuf + ssiz;
+#endif
+	/* read in the strings and verify them */
+	if ((unsigned)(dlthis->strm->read_buffer(dlthis->strm, strbuf,
+						 ssiz)) != ssiz) {
+		DL_ERROR(readstrm, stringtbl);
+	}
+	/* if we need to fix up byte order, do it now */
+#ifndef _BIG_ENDIAN
+	if (dlthis->reorder_map)
+		dload_reorder(strbuf, ssiz, dlthis->reorder_map);
+
+	if ((!sec_names_only) && (~dload_checksum(strbuf, ssiz) !=
+				  dlthis->verify.dv_str_tab_checksum)) {
+		DL_ERROR(err_checksum, stringtbl);
+	}
+#else
+	if (dlthis->dfile_hdr.df_byte_reshuffle !=
+	    HOST_BYTE_ORDER(REORDER_MAP(BYTE_RESHUFFLE_VALUE))) {
+		/* put strings in big-endian order, not in PC order */
+		dload_reorder(strbuf, ssiz,
+			      HOST_BYTE_ORDER(dlthis->
+					      dfile_hdr.df_byte_reshuffle));
+	}
+	if ((!sec_names_only) && (~dload_reverse_checksum(strbuf, ssiz) !=
+				  dlthis->verify.dv_str_tab_checksum)) {
+		DL_ERROR(err_checksum, stringtbl);
+	}
+#endif
+}				/* dload_strings */
+
+/*************************************************************************
+ * Procedure string_table_free
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Frees any state used by the string table.
+ *
+ * WARNING:
+ *	This routine is not allowed to declare errors!
+ ************************************************************************ */
+static void string_table_free(struct dload_state *dlthis)
+{
+	if (dlthis->str_head)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						dlthis->str_head);
+
+}				/* string_table_free */
+
+/*
+ * Symbol Table Maintenance Functions
+ *
+ * COFF symbols are read by dload_symbols(), which is called after
+ * sections have been allocated.  Symbols which might be used in
+ * relocation (ie, not debug info) are retained in an internal temporary
+ * compressed table (type local_symbol). A particular symbol is recovered
+ * by index by calling dload_find_symbol().  dload_find_symbol
+ * reconstructs a more explicit representation (type SLOTVEC) which is
+ * used by reloc.c
+ */
+/* real size of debug header */
+#define DBG_HDR_SIZE (sizeof(struct dll_module) - sizeof(struct dll_sect))
+
+static const char sym_errid[] = { "symbol" };
+
+/**************************************************************************
+ * Procedure dload_symbols
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Reads in symbols and retains ones that might be needed for relocation
+ * purposes.
+ *********************************************************************** */
+/* size of symbol buffer no bigger than target data buffer, to limit stack
+ * usage */
+#define MY_SYM_BUF_SIZ (BYTE_TO_HOST(IMAGE_PACKET_SIZE)/\
+			sizeof(struct doff_syment_t))
+
+static void dload_symbols(struct dload_state *dlthis)
+{
+	u32 sym_count, siz, dsiz, symbols_left;
+	u32 checks;
+	struct local_symbol *sp;
+	struct dynload_symbol *symp;
+	struct dynload_symbol *newsym;
+
+	sym_count = dlthis->dfile_hdr.df_no_syms;
+	if (sym_count == 0)
+		return;
+
+	/*
+	 * We keep a local symbol table for all of the symbols in the input.
+	 * This table contains only section & value info, as we do not have
+	 * to do any name processing for locals.  We reuse this storage
+	 * as a temporary for .dllview record construction.
+	 * Allocate storage for the whole table.  Add 1 to the section count
+	 * in case a trampoline section is auto-generated as well as the
+	 * size of the trampoline section name so DLLView doens't get lost.
+	 */
+
+	siz = sym_count * sizeof(struct local_symbol);
+	dsiz = DBG_HDR_SIZE +
+	    (sizeof(struct dll_sect) * dlthis->allocated_secn_count) +
+	    BYTE_TO_HOST_ROUND(dlthis->debug_string_size + 1);
+	if (dsiz > siz)
+		siz = dsiz;	/* larger of symbols and .dllview temp */
+	sp = (struct local_symbol *)dlthis->mysym->dload_allocate(dlthis->mysym,
+								  siz);
+	if (!sp) {
+		DL_ERROR(err_alloc, siz);
+		return;
+	}
+	dlthis->local_symtab = sp;
+	/* Read the symbols in the input, store them in the table, and post any
+	 * globals to the global symbol table.  In the process, externals
+	 become defined from the global symbol table */
+	checks = dlthis->verify.dv_sym_tab_checksum;
+	symbols_left = sym_count;
+	do {			/* read all symbols */
+		char *sname;
+		u32 val;
+		s32 delta;
+		struct doff_syment_t *input_sym;
+		unsigned syms_in_buf;
+		struct doff_syment_t my_sym_buf[MY_SYM_BUF_SIZ];
+		input_sym = my_sym_buf;
+		syms_in_buf = symbols_left > MY_SYM_BUF_SIZ ?
+		    MY_SYM_BUF_SIZ : symbols_left;
+		siz = syms_in_buf * sizeof(struct doff_syment_t);
+		if (dlthis->strm->read_buffer(dlthis->strm, input_sym, siz) !=
+		    siz) {
+			DL_ERROR(readstrm, sym_errid);
+			return;
+		}
+		if (dlthis->reorder_map)
+			dload_reorder(input_sym, siz, dlthis->reorder_map);
+
+		checks += dload_checksum(input_sym, siz);
+		do {		/* process symbols in buffer */
+			symbols_left -= 1;
+			/* attempt to derive the name of this symbol */
+			sname = NULL;
+			if (input_sym->dn_offset > 0) {
+#if BITS_PER_AU <= BITS_PER_BYTE
+				if ((u32) input_sym->dn_offset <
+				    dlthis->dfile_hdr.df_strtab_size)
+					sname = dlthis->str_head +
+					    BYTE_TO_HOST(input_sym->dn_offset);
+				else
+					dload_error(dlthis,
+						    "Bad name offset in symbol "
+						    " %d", symbols_left);
+#else
+				sname = unpack_name(dlthis,
+						    input_sym->dn_offset);
+#endif
+			}
+			val = input_sym->dn_value;
+			delta = 0;
+			sp->sclass = input_sym->dn_sclass;
+			sp->secnn = input_sym->dn_scnum;
+			/* if this is an undefined symbol,
+			 * define it (or fail) now */
+			if (sp->secnn == DN_UNDEF) {
+				/* pointless for static undefined */
+				if (input_sym->dn_sclass != DN_EXT)
+					goto loop_cont;
+
+				/* try to define symbol from previously
+				 * loaded images */
+				symp = dlthis->mysym->find_matching_symbol
+				    (dlthis->mysym, sname);
+				if (!symp) {
+					DL_ERROR
+					    ("Undefined external symbol %s",
+					     sname);
+					goto loop_cont;
+				}
+				val = delta = symp->value;
+#ifdef ENABLE_TRAMP_DEBUG
+				dload_syms_error(dlthis->mysym,
+						 "===> ext sym [%s] at %x",
+						 sname, val);
+#endif
+
+				goto loop_cont;
+			}
+			/* symbol defined by this module */
+			if (sp->secnn > 0) {
+				/* symbol references a section */
+				if ((unsigned)sp->secnn <=
+				    dlthis->allocated_secn_count) {
+					/* section was allocated */
+					struct doff_scnhdr_t *srefp =
+					    &dlthis->sect_hdrs[sp->secnn - 1];
+
+					if (input_sym->dn_sclass ==
+					    DN_STATLAB ||
+					    input_sym->dn_sclass == DN_EXTLAB) {
+						/* load */
+						delta = srefp->ds_vaddr;
+					} else {
+						/* run */
+						delta = srefp->ds_paddr;
+					}
+					val += delta;
+				}
+				goto loop_itr;
+			}
+			/* This symbol is an absolute symbol */
+			if (sp->secnn == DN_ABS && ((sp->sclass == DN_EXT) ||
+						    (sp->sclass ==
+						     DN_EXTLAB))) {
+				symp =
+				    dlthis->mysym->find_matching_symbol(dlthis->
+									mysym,
+									sname);
+				if (!symp)
+					goto loop_itr;
+				/* This absolute symbol is already defined. */
+				if (symp->value == input_sym->dn_value) {
+					/* If symbol values are equal, continue
+					 * but don't add to the global symbol
+					 * table */
+					sp->value = val;
+					sp->delta = delta;
+					sp += 1;
+					input_sym += 1;
+					continue;
+				} else {
+					/* If symbol values are not equal,
+					 * return with redefinition error */
+					DL_ERROR("Absolute symbol %s is "
+						 "defined multiple times with "
+						 "different values", sname);
+					return;
+				}
+			}
+loop_itr:
+			/* if this is a global symbol, post it to the
+			 * global table */
+			if (input_sym->dn_sclass == DN_EXT ||
+			    input_sym->dn_sclass == DN_EXTLAB) {
+				/* Keep this global symbol for subsequent
+				 * modules. Don't complain on error, to allow
+				 * symbol API to suppress global symbols */
+				if (!sname)
+					goto loop_cont;
+
+				newsym = dlthis->mysym->add_to_symbol_table
+				    (dlthis->mysym, sname,
+				     (unsigned)dlthis->myhandle);
+				if (newsym)
+					newsym->value = val;
+
+			}	/* global */
+loop_cont:
+			sp->value = val;
+			sp->delta = delta;
+			sp += 1;
+			input_sym += 1;
+		} while ((syms_in_buf -= 1) > 0);	/* process sym in buf */
+	} while (symbols_left > 0);	/* read all symbols */
+	if (~checks)
+		dload_error(dlthis, "Checksum of symbols failed");
+
+}				/* dload_symbols */
+
+/*****************************************************************************
+ * Procedure symbol_table_free
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Frees any state used by the symbol table.
+ *
+ * WARNING:
+ *	This routine is not allowed to declare errors!
+ **************************************************************************** */
+static void symbol_table_free(struct dload_state *dlthis)
+{
+	if (dlthis->local_symtab) {
+		if (dlthis->dload_errcount) {	/* blow off our symbols */
+			dlthis->mysym->purge_symbol_table(dlthis->mysym,
+							  (unsigned)
+							  dlthis->myhandle);
+		}
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						dlthis->local_symtab);
+	}
+}				/* symbol_table_free */
+
+/* .cinit Processing
+ *
+ * The dynamic loader does .cinit interpretation.  cload_cinit()
+ * acts as a special write-to-target function, in that it takes relocated
+ * data from the normal data flow, and interprets it as .cinit actions.
+ * Because the normal data flow does not  necessarily process the whole
+ * .cinit section in one buffer, cload_cinit() must be prepared to
+ * interpret the data piecemeal.  A state machine is used for this
+ * purpose.
+ */
+
+/* The following are only for use by reloc.c and things it calls */
+static const struct ldr_section_info cinit_info_init = { cinitname, 0, 0,
+	(ldr_addr)-1, 0, DLOAD_BSS, 0
+};
+
+/*************************************************************************
+ * Procedure cload_cinit
+ *
+ * Parameters:
+ *	ipacket		Pointer to data packet to be loaded
+ *
+ * Effect:
+ *	Interprets the data in the buffer as .cinit data, and performs the
+ * appropriate initializations.
+ *********************************************************************** */
+static void cload_cinit(struct dload_state *dlthis,
+			struct image_packet_t *ipacket)
+{
+#if TDATA_TO_HOST(CINIT_COUNT)*BITS_PER_AU > 16
+	s32 init_count, left;
+#else
+	s16 init_count, left;
+#endif
+	unsigned char *pktp = ipacket->img_data;
+	unsigned char *pktend = pktp + BYTE_TO_HOST_ROUND(ipacket->packet_size);
+	int temp;
+	ldr_addr atmp;
+	struct ldr_section_info cinit_info;
+
+	/*  PROCESS ALL THE INITIALIZATION RECORDS THE BUFFER. */
+	while (true) {
+		left = pktend - pktp;
+		switch (dlthis->cinit_state) {
+		case CI_COUNT:	/* count field */
+			if (left < TDATA_TO_HOST(CINIT_COUNT))
+				goto loopexit;
+			temp = dload_unpack(dlthis, (tgt_au_t *) pktp,
+					    CINIT_COUNT * TDATA_AU_BITS, 0,
+					    ROP_SGN);
+			pktp += TDATA_TO_HOST(CINIT_COUNT);
+			/* negative signifies BSS table, zero means done */
+			if (temp <= 0) {
+				dlthis->cinit_state = CI_DONE;
+				break;
+			}
+			dlthis->cinit_count = temp;
+			dlthis->cinit_state = CI_ADDRESS;
+			break;
+#if CINIT_ALIGN < CINIT_ADDRESS
+		case CI_PARTADDRESS:
+			pktp -= TDATA_TO_HOST(CINIT_ALIGN);
+			/* back up pointer into space courtesy of caller */
+			*(uint16_t *) pktp = dlthis->cinit_addr;
+			/* stuff in saved bits  !! FALL THRU !! */
+#endif
+		case CI_ADDRESS:	/* Address field for a copy packet */
+			if (left < TDATA_TO_HOST(CINIT_ADDRESS)) {
+#if CINIT_ALIGN < CINIT_ADDRESS
+				if (left == TDATA_TO_HOST(CINIT_ALIGN)) {
+					/* address broken into halves */
+					dlthis->cinit_addr = *(uint16_t *) pktp;
+					/* remember 1st half */
+					dlthis->cinit_state = CI_PARTADDRESS;
+					left = 0;
+				}
+#endif
+				goto loopexit;
+			}
+			atmp = dload_unpack(dlthis, (tgt_au_t *) pktp,
+					    CINIT_ADDRESS * TDATA_AU_BITS, 0,
+					    ROP_UNS);
+			pktp += TDATA_TO_HOST(CINIT_ADDRESS);
+#if CINIT_PAGE_BITS > 0
+			dlthis->cinit_page = atmp &
+			    ((1 << CINIT_PAGE_BITS) - 1);
+			atmp >>= CINIT_PAGE_BITS;
+#else
+			dlthis->cinit_page = CINIT_DEFAULT_PAGE;
+#endif
+			dlthis->cinit_addr = atmp;
+			dlthis->cinit_state = CI_COPY;
+			break;
+		case CI_COPY:	/* copy bits to the target */
+			init_count = HOST_TO_TDATA(left);
+			if (init_count > dlthis->cinit_count)
+				init_count = dlthis->cinit_count;
+			if (init_count == 0)
+				goto loopexit;	/* get more bits */
+			cinit_info = cinit_info_init;
+			cinit_info.page = dlthis->cinit_page;
+			if (!dlthis->myio->writemem(dlthis->myio, pktp,
+						   TDATA_TO_TADDR
+						   (dlthis->cinit_addr),
+						   &cinit_info,
+						   TDATA_TO_HOST(init_count))) {
+				dload_error(dlthis, initfail, "write",
+					    dlthis->cinit_addr);
+			}
+			dlthis->cinit_count -= init_count;
+			if (dlthis->cinit_count <= 0) {
+				dlthis->cinit_state = CI_COUNT;
+				init_count = (init_count + CINIT_ALIGN - 1) &
+				    -CINIT_ALIGN;
+				/* align to next init */
+			}
+			pktp += TDATA_TO_HOST(init_count);
+			dlthis->cinit_addr += init_count;
+			break;
+		case CI_DONE:	/* no more .cinit to do */
+			return;
+		}		/* switch (cinit_state) */
+	}			/* while */
+
+loopexit:
+	if (left > 0) {
+		dload_error(dlthis, "%d bytes left over in cinit packet", left);
+		dlthis->cinit_state = CI_DONE;	/* left over bytes are bad */
+	}
+}				/* cload_cinit */
+
+/*	Functions to interface to reloc.c
+ *
+ * reloc.c is the relocation module borrowed from the linker, with
+ * minimal (we hope) changes for our purposes.  cload_sect_data() invokes
+ * this module on a section to relocate and load the image data for that
+ * section.  The actual read and write actions are supplied by the global
+ * routines below.
+ */
+
+/************************************************************************
+ * Procedure relocate_packet
+ *
+ * Parameters:
+ *	ipacket		Pointer to an image packet to relocate
+ *
+ * Effect:
+ *	Performs the required relocations on the packet.  Returns a checksum
+ * of the relocation operations.
+ *********************************************************************** */
+#define MY_RELOC_BUF_SIZ 8
+/* careful! exists at the same time as the image buffer */
+static int relocate_packet(struct dload_state *dlthis,
+			   struct image_packet_t *ipacket,
+			   u32 *checks, bool *tramps_generated)
+{
+	u32 rnum;
+	*tramps_generated = false;
+
+	rnum = ipacket->num_relocs;
+	do {			/* all relocs */
+		unsigned rinbuf;
+		int siz;
+		struct reloc_record_t *rp, rrec[MY_RELOC_BUF_SIZ];
+		rp = rrec;
+		rinbuf = rnum > MY_RELOC_BUF_SIZ ? MY_RELOC_BUF_SIZ : rnum;
+		siz = rinbuf * sizeof(struct reloc_record_t);
+		if (dlthis->strm->read_buffer(dlthis->strm, rp, siz) != siz) {
+			DL_ERROR(readstrm, "relocation");
+			return 0;
+		}
+		/* reorder the bytes if need be */
+		if (dlthis->reorder_map)
+			dload_reorder(rp, siz, dlthis->reorder_map);
+
+		*checks += dload_checksum(rp, siz);
+		do {
+			/* perform the relocation operation */
+			dload_relocate(dlthis, (tgt_au_t *) ipacket->img_data,
+				       rp, tramps_generated, false);
+			rp += 1;
+			rnum -= 1;
+		} while ((rinbuf -= 1) > 0);
+	} while (rnum > 0);	/* all relocs */
+	/* If trampoline(s) were generated, we need to do an update of the
+	 * trampoline copy of the packet since a 2nd phase relo will be done
+	 * later. */
+	if (*tramps_generated == true) {
+		dload_tramp_pkt_udpate(dlthis,
+				       (dlthis->image_secn -
+					dlthis->ldr_sections),
+				       dlthis->image_offset, ipacket);
+	}
+
+	return 1;
+}				/* dload_read_reloc */
+
+#define IPH_SIZE (sizeof(struct image_packet_t) - sizeof(u32))
+
+/* VERY dangerous */
+static const char imagepak[] = { "image packet" };
+
+/*************************************************************************
+ * Procedure dload_data
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Read image data from input file, relocate it, and download it to the
+ *	target.
+ *********************************************************************** */
+static void dload_data(struct dload_state *dlthis)
+{
+	u16 curr_sect;
+	struct doff_scnhdr_t *sptr = dlthis->sect_hdrs;
+	struct ldr_section_info *lptr = dlthis->ldr_sections;
+#ifdef OPT_ZERO_COPY_LOADER
+	bool zero_copy = false;
+#endif
+	u8 *dest;
+
+	struct {
+		struct image_packet_t ipacket;
+		u8 bufr[BYTE_TO_HOST(IMAGE_PACKET_SIZE)];
+	} ibuf;
+
+	/* Indicates whether CINIT processing has occurred */
+	bool cinit_processed = false;
+
+	/* Loop through the sections and load them one at a time.
+	 */
+	for (curr_sect = 0; curr_sect < dlthis->dfile_hdr.df_no_scns;
+	     curr_sect += 1) {
+		if (ds_needs_download(sptr)) {
+			s32 nip;
+			ldr_addr image_offset = 0;
+			/* set relocation info for this section */
+			if (curr_sect < dlthis->allocated_secn_count)
+				dlthis->delta_runaddr = sptr->ds_paddr;
+			else {
+				lptr = (struct ldr_section_info *)sptr;
+				dlthis->delta_runaddr = 0;
+			}
+			dlthis->image_secn = lptr;
+#if BITS_PER_AU > BITS_PER_BYTE
+			lptr->name = unpack_name(dlthis, sptr->ds_offset);
+#endif
+			nip = sptr->ds_nipacks;
+			while ((nip -= 1) >= 0) {	/* process packets */
+
+				s32 ipsize;
+				u32 checks;
+				bool tramp_generated = false;
+
+				/* get the fixed header bits */
+				if (dlthis->strm->read_buffer(dlthis->strm,
+							      &ibuf.ipacket,
+							      IPH_SIZE) !=
+				    IPH_SIZE) {
+					DL_ERROR(readstrm, imagepak);
+					return;
+				}
+				/* reorder the header if need be */
+				if (dlthis->reorder_map) {
+					dload_reorder(&ibuf.ipacket, IPH_SIZE,
+						      dlthis->reorder_map);
+				}
+				/* now read the rest of the packet */
+				ipsize =
+				    BYTE_TO_HOST(DOFF_ALIGN
+						 (ibuf.ipacket.packet_size));
+				if (ipsize > BYTE_TO_HOST(IMAGE_PACKET_SIZE)) {
+					DL_ERROR("Bad image packet size %d",
+						 ipsize);
+					return;
+				}
+				dest = ibuf.bufr;
+#ifdef OPT_ZERO_COPY_LOADER
+				zero_copy = false;
+				if (!dload_check_type(sptr, DLOAD_CINIT) {
+					dlthis->myio->writemem(dlthis->myio,
+							       &dest,
+							       lptr->load_addr +
+							       image_offset,
+							       lptr, 0);
+					zero_copy = (dest != ibuf.bufr);
+				}
+#endif
+				/* End of determination */
+
+				if (dlthis->strm->read_buffer(dlthis->strm,
+							      ibuf.bufr,
+							      ipsize) !=
+				    ipsize) {
+					DL_ERROR(readstrm, imagepak);
+					return;
+				}
+				ibuf.ipacket.img_data = dest;
+
+				/* reorder the bytes if need be */
+#if !defined(_BIG_ENDIAN) || (TARGET_AU_BITS > 16)
+				if (dlthis->reorder_map) {
+					dload_reorder(dest, ipsize,
+						      dlthis->reorder_map);
+				}
+				checks = dload_checksum(dest, ipsize);
+#else
+				if (dlthis->dfile_hdr.df_byte_reshuffle !=
+				    TARGET_ORDER(REORDER_MAP
+						 (BYTE_RESHUFFLE_VALUE))) {
+					/* put image bytes in big-endian order,
+					 * not PC order */
+					dload_reorder(dest, ipsize,
+						      TARGET_ORDER
+						      (dlthis->dfile_hdr.
+						       df_byte_reshuffle));
+				}
+#if TARGET_AU_BITS > 8
+				checks = dload_reverse_checksum16(dest, ipsize);
+#else
+				checks = dload_reverse_checksum(dest, ipsize);
+#endif
+#endif
+
+				checks += dload_checksum(&ibuf.ipacket,
+							 IPH_SIZE);
+				/* relocate the image bits as needed */
+				if (ibuf.ipacket.num_relocs) {
+					dlthis->image_offset = image_offset;
+					if (!relocate_packet(dlthis,
+							     &ibuf.ipacket,
+							     &checks,
+							     &tramp_generated))
+						return;	/* serious error */
+				}
+				if (~checks)
+					DL_ERROR(err_checksum, imagepak);
+				/* Only write the result to the target if no
+				 * trampoline was generated.  Otherwise it
+				 *will be done during trampoline finalize. */
+
+				if (tramp_generated == false) {
+
+					/* stuff the result into target
+					 * memory */
+					if (dload_check_type(sptr,
+						DLOAD_CINIT)) {
+						cload_cinit(dlthis,
+							    &ibuf.ipacket);
+						cinit_processed = true;
+					} else {
+#ifdef OPT_ZERO_COPY_LOADER
+						if (!zero_copy) {
+#endif
+							/* FIXME */
+							if (!dlthis->myio->
+							    writemem(dlthis->
+								myio,
+								ibuf.bufr,
+								lptr->
+								load_addr +
+								image_offset,
+								lptr,
+								BYTE_TO_HOST
+								(ibuf.
+								ipacket.
+								packet_size))) {
+								DL_ERROR
+								  ("Write to "
+								  FMT_UI32
+								  " failed",
+								  lptr->
+								  load_addr +
+								  image_offset);
+							}
+#ifdef OPT_ZERO_COPY_LOADER
+						}
+#endif
+					}
+				}
+				image_offset +=
+				    BYTE_TO_TADDR(ibuf.ipacket.packet_size);
+			}	/* process packets */
+			/* if this is a BSS section, we may want to fill it */
+			if (!dload_check_type(sptr, DLOAD_BSS))
+				goto loop_cont;
+
+			if (!(dlthis->myoptions & DLOAD_INITBSS))
+				goto loop_cont;
+
+			if (cinit_processed) {
+				/* Don't clear BSS after load-time
+				 * initialization */
+				DL_ERROR
+				    ("Zero-initialization at " FMT_UI32
+				     " after " "load-time initialization!",
+				     lptr->load_addr);
+				goto loop_cont;
+			}
+			/* fill the .bss area */
+			dlthis->myio->fillmem(dlthis->myio,
+					      TADDR_TO_HOST(lptr->load_addr),
+					      lptr, TADDR_TO_HOST(lptr->size),
+					      DLOAD_FILL_BSS);
+			goto loop_cont;
+		}
+		/* if DS_DOWNLOAD_MASK */
+		/* If not loading, but BSS, zero initialize */
+		if (!dload_check_type(sptr, DLOAD_BSS))
+			goto loop_cont;
+
+		if (!(dlthis->myoptions & DLOAD_INITBSS))
+			goto loop_cont;
+
+		if (curr_sect >= dlthis->allocated_secn_count)
+			lptr = (struct ldr_section_info *)sptr;
+
+		if (cinit_processed) {
+			/*Don't clear BSS after load-time initialization */
+			DL_ERROR("Zero-initialization at " FMT_UI32
+				 " attempted after "
+				 "load-time initialization!", lptr->load_addr);
+			goto loop_cont;
+		}
+		/* fill the .bss area */
+		dlthis->myio->fillmem(dlthis->myio,
+				      TADDR_TO_HOST(lptr->load_addr), lptr,
+				      TADDR_TO_HOST(lptr->size),
+				      DLOAD_FILL_BSS);
+loop_cont:
+		sptr += 1;
+		lptr += 1;
+	}			/* load sections */
+
+	/*  Finalize any trampolines that were created during the load */
+	if (dload_tramp_finalize(dlthis) == 0) {
+		DL_ERROR("Finalization of auto-trampolines (size = " FMT_UI32
+			 ") failed", dlthis->tramp.tramp_sect_next_addr);
+	}
+}				/* dload_data */
+
+/*************************************************************************
+ * Procedure dload_reorder
+ *
+ * Parameters:
+ *	data	32-bit aligned pointer to data to be byte-swapped
+ *	dsiz	size of the data to be reordered in sizeof() units.
+ *	map		32-bit map defining how to reorder the data.  Value
+ *			must be REORDER_MAP() of some permutation
+ *			of 0x00 01 02 03
+ *
+ * Effect:
+ *	Re-arranges the bytes in each word according to the map specified.
+ *
+ *********************************************************************** */
+/* mask for byte shift count */
+#define SHIFT_COUNT_MASK (3 << LOG_BITS_PER_BYTE)
+
+void dload_reorder(void *data, int dsiz, unsigned int map)
+{
+	register u32 tmp, tmap, datv;
+	u32 *dp = (u32 *) data;
+
+	map <<= LOG_BITS_PER_BYTE;	/* align map with SHIFT_COUNT_MASK */
+	do {
+		tmp = 0;
+		datv = *dp;
+		tmap = map;
+		do {
+			tmp |= (datv & BYTE_MASK) << (tmap & SHIFT_COUNT_MASK);
+			tmap >>= BITS_PER_BYTE;
+		} while (datv >>= BITS_PER_BYTE);
+		*dp++ = tmp;
+	} while ((dsiz -= sizeof(u32)) > 0);
+}				/* dload_reorder */
+
+/*************************************************************************
+ * Procedure dload_checksum
+ *
+ * Parameters:
+ *	data	32-bit aligned pointer to data to be checksummed
+ *	siz		size of the data to be checksummed in sizeof() units.
+ *
+ * Effect:
+ *	Returns a checksum of the specified block
+ *
+ *********************************************************************** */
+u32 dload_checksum(void *data, unsigned siz)
+{
+	u32 sum;
+	u32 *dp;
+	int left;
+
+	sum = 0;
+	dp = (u32 *) data;
+	for (left = siz; left > 0; left -= sizeof(u32))
+		sum += *dp++;
+	return sum;
+}				/* dload_checksum */
+
+#if HOST_ENDIANNESS
+/*************************************************************************
+ * Procedure dload_reverse_checksum
+ *
+ * Parameters:
+ *	data	32-bit aligned pointer to data to be checksummed
+ *	siz		size of the data to be checksummed in sizeof() units.
+ *
+ * Effect:
+ *	Returns a checksum of the specified block, which is assumed to be bytes
+ * in big-endian order.
+ *
+ * Notes:
+ *	In a big-endian host, things like the string table are stored as bytes
+ * in host order. But dllcreate always checksums in little-endian order.
+ * It is most efficient to just handle the difference a word at a time.
+ *
+ ********************************************************************** */
+u32 dload_reverse_checksum(void *data, unsigned siz)
+{
+	u32 sum, temp;
+	u32 *dp;
+	int left;
+
+	sum = 0;
+	dp = (u32 *) data;
+
+	for (left = siz; left > 0; left -= sizeof(u32)) {
+		temp = *dp++;
+		sum += temp << BITS_PER_BYTE * 3;
+		sum += temp >> BITS_PER_BYTE * 3;
+		sum += (temp >> BITS_PER_BYTE) & (BYTE_MASK << BITS_PER_BYTE);
+		sum += (temp & (BYTE_MASK << BITS_PER_BYTE)) << BITS_PER_BYTE;
+	}
+
+	return sum;
+}				/* dload_reverse_checksum */
+
+#if (TARGET_AU_BITS > 8) && (TARGET_AU_BITS < 32)
+u32 dload_reverse_checksum16(void *data, unsigned siz)
+{
+	uint_fast32_t sum, temp;
+	u32 *dp;
+	int left;
+
+	sum = 0;
+	dp = (u32 *) data;
+
+	for (left = siz; left > 0; left -= sizeof(u32)) {
+		temp = *dp++;
+		sum += temp << BITS_PER_BYTE * 2;
+		sum += temp >> BITS_PER_BYTE * 2;
+	}
+
+	return sum;
+}				/* dload_reverse_checksum16 */
+#endif
+#endif
+
+/*************************************************************************
+ * Procedure swap_words
+ *
+ * Parameters:
+ *	data	32-bit aligned pointer to data to be swapped
+ *	siz	size of the data to be swapped.
+ *	bitmap	Bit map of how to swap each 32-bit word; 1 => 2 shorts,
+ *		0 => 1 long
+ *
+ * Effect:
+ *	Swaps the specified data according to the specified map
+ *
+ *********************************************************************** */
+static void swap_words(void *data, unsigned siz, unsigned bitmap)
+{
+	register int i;
+#if TARGET_AU_BITS < 16
+	register u16 *sp;
+#endif
+	register u32 *lp;
+
+	siz /= sizeof(u16);
+
+#if TARGET_AU_BITS < 16
+	/* pass 1: do all the bytes */
+	i = siz;
+	sp = (u16 *) data;
+	do {
+		register u16 tmp;
+		tmp = *sp;
+		*sp++ = SWAP16BY8(tmp);
+	} while ((i -= 1) > 0);
+#endif
+
+#if TARGET_AU_BITS < 32
+	/* pass 2: fixup the 32-bit words */
+	i = siz >> 1;
+	lp = (u32 *) data;
+	do {
+		if ((bitmap & 1) == 0) {
+			register u32 tmp;
+			tmp = *lp;
+			*lp = SWAP32BY16(tmp);
+		}
+		lp += 1;
+		bitmap >>= 1;
+	} while ((i -= 1) > 0);
+#endif
+}				/* swap_words */
+
+/*************************************************************************
+ * Procedure copy_tgt_strings
+ *
+ * Parameters:
+ *	dstp		Destination address.  Assumed to be 32-bit aligned
+ *	srcp		Source address.  Assumed to be 32-bit aligned
+ *	charcount	Number of characters to copy.
+ *
+ * Effect:
+ *	Copies strings from the source (which is in usual .dof file order on
+ * the loading processor) to the destination buffer (which should be in proper
+ * target addressable unit order).  Makes sure the last string in the
+ * buffer is NULL terminated (for safety).
+ * Returns the first unused destination address.
+ *********************************************************************** */
+static char *copy_tgt_strings(void *dstp, void *srcp, unsigned charcount)
+{
+	register tgt_au_t *src = (tgt_au_t *) srcp;
+	register tgt_au_t *dst = (tgt_au_t *) dstp;
+	register int cnt = charcount;
+	do {
+#if TARGET_AU_BITS <= BITS_PER_AU
+		/* byte-swapping issues may exist for strings on target */
+		*dst++ = *src++;
+#else
+		*dst++ = *src++;
+#endif
+	} while ((cnt -= (sizeof(tgt_au_t) * BITS_PER_AU / BITS_PER_BYTE)) > 0);
+	/*apply force to make sure that the string table has null terminator */
+#if (BITS_PER_AU == BITS_PER_BYTE) && (TARGET_AU_BITS == BITS_PER_BYTE)
+	dst[-1] = 0;
+#else
+	/* little endian */
+	dst[-1] &= (1 << (BITS_PER_AU - BITS_PER_BYTE)) - 1;
+#endif
+	return (char *)dst;
+}				/* copy_tgt_strings */
+
+/*************************************************************************
+ * Procedure init_module_handle
+ *
+ * Parameters:
+ *	none
+ *
+ * Effect:
+ *	Initializes the module handle we use to enable unloading, and installs
+ * the debug information required by the target.
+ *
+ * Notes:
+ * The handle returned from dynamic_load_module needs to encapsulate all the
+ * allocations done for the module, and enable them plus the modules symbols to
+ * be deallocated.
+ *
+ *********************************************************************** */
+#ifndef _BIG_ENDIAN
+static const struct ldr_section_info dllview_info_init = { ".dllview", 0, 0,
+	(ldr_addr)-1, DBG_LIST_PAGE, DLOAD_DATA, 0
+};
+#else
+static const struct ldr_section_info dllview_info_init = { ".dllview", 0, 0,
+	(ldr_addr)-1, DLOAD_DATA, DBG_LIST_PAGE, 0
+};
+#endif
+static void init_module_handle(struct dload_state *dlthis)
+{
+	struct my_handle *hndl;
+	u16 curr_sect;
+	struct ldr_section_info *asecs;
+	struct dll_module *dbmod;
+	struct dll_sect *dbsec;
+	struct dbg_mirror_root *mlist;
+	register char *cp;
+	struct modules_header mhdr;
+	struct ldr_section_info dllview_info;
+	struct dynload_symbol *debug_mirror_sym;
+	hndl = dlthis->myhandle;
+	if (!hndl)
+		return;		/* must be errors detected, so forget it */
+
+	/*  Store the section count */
+	hndl->secn_count = dlthis->allocated_secn_count;
+
+	/*  If a trampoline section was created, add it in */
+	if (dlthis->tramp.tramp_sect_next_addr != 0)
+		hndl->secn_count += 1;
+
+	hndl->secn_count = hndl->secn_count << 1;
+
+	hndl->secn_count = dlthis->allocated_secn_count << 1;
+#ifndef TARGET_ENDIANNESS
+	if (dlthis->big_e_target)
+		hndl->secn_count += 1;	/* flag for big-endian */
+#endif
+	if (dlthis->dload_errcount)
+		return;		/* abandon if errors detected */
+	/* Locate the symbol that names the header for the CCS debug list
+	   of modules. If not found, we just don't generate the debug record.
+	   If found, we create our modules list.  We make sure to create the
+	   loader_dllview_root even if there is no relocation info to record,
+	   just to try to put both symbols in the same symbol table and
+	   module. */
+	debug_mirror_sym = dlthis->mysym->find_matching_symbol(dlthis->mysym,
+							loader_dllview_root);
+	if (!debug_mirror_sym) {
+		struct dynload_symbol *dlmodsym;
+		struct dbg_mirror_root *mlst;
+
+		/* our root symbol is not yet present;
+		   check if we have DLModules defined */
+		dlmodsym = dlthis->mysym->find_matching_symbol(dlthis->mysym,
+							LINKER_MODULES_HEADER);
+		if (!dlmodsym)
+			return;	/* no DLModules list so no debug info */
+		/* if we have DLModules defined, construct our header */
+		mlst = (struct dbg_mirror_root *)
+		    dlthis->mysym->dload_allocate(dlthis->mysym,
+						  sizeof(struct
+							 dbg_mirror_root));
+		if (!mlst) {
+			DL_ERROR(err_alloc, sizeof(struct dbg_mirror_root));
+			return;
+		}
+		mlst->hnext = NULL;
+		mlst->changes = 0;
+		mlst->refcount = 0;
+		mlst->dbthis = TDATA_TO_TADDR(dlmodsym->value);
+		/* add our root symbol */
+		debug_mirror_sym = dlthis->mysym->add_to_symbol_table
+		    (dlthis->mysym, loader_dllview_root,
+		     (unsigned)dlthis->myhandle);
+		if (!debug_mirror_sym) {
+			/* failed, recover memory */
+			dlthis->mysym->dload_deallocate(dlthis->mysym, mlst);
+			return;
+		}
+		debug_mirror_sym->value = (u32) mlst;
+	}
+	/* First create the DLLview record and stuff it into the buffer.
+	   Then write it to the DSP.  Record pertinent locations in our hndl,
+	   and add it to the per-processor list of handles with debug info. */
+#ifndef DEBUG_HEADER_IN_LOADER
+	mlist = (struct dbg_mirror_root *)debug_mirror_sym->value;
+	if (!mlist)
+		return;
+#else
+	mlist = (struct dbg_mirror_root *)&debug_list_header;
+#endif
+	hndl->dm.hroot = mlist;	/* set pointer to root into our handle */
+	if (!dlthis->allocated_secn_count)
+		return;		/* no load addresses to be recorded */
+	/* reuse temporary symbol storage */
+	dbmod = (struct dll_module *)dlthis->local_symtab;
+	/* Create the DLLview record in the memory we retain for our handle */
+	dbmod->num_sects = dlthis->allocated_secn_count;
+	dbmod->timestamp = dlthis->verify.dv_timdat;
+	dbmod->version = INIT_VERSION;
+	dbmod->verification = VERIFICATION;
+	asecs = dlthis->ldr_sections;
+	dbsec = dbmod->sects;
+	for (curr_sect = dlthis->allocated_secn_count;
+	     curr_sect > 0; curr_sect -= 1) {
+		dbsec->sect_load_adr = asecs->load_addr;
+		dbsec->sect_run_adr = asecs->run_addr;
+		dbsec += 1;
+		asecs += 1;
+	}
+
+	/*  If a trampoline section was created go ahead and add its info */
+	if (dlthis->tramp.tramp_sect_next_addr != 0) {
+		dbmod->num_sects++;
+		dbsec->sect_load_adr = asecs->load_addr;
+		dbsec->sect_run_adr = asecs->run_addr;
+		dbsec++;
+		asecs++;
+	}
+
+	/* now cram in the names */
+	cp = copy_tgt_strings(dbsec, dlthis->str_head,
+			      dlthis->debug_string_size);
+
+	/* If a trampoline section was created, add its name so DLLView
+	 * can show the user the section info. */
+	if (dlthis->tramp.tramp_sect_next_addr != 0) {
+		cp = copy_tgt_strings(cp,
+				      dlthis->tramp.final_string_table,
+				      strlen(dlthis->tramp.final_string_table) +
+				      1);
+	}
+
+	/* round off the size of the debug record, and remember same */
+	hndl->dm.dbsiz = HOST_TO_TDATA_ROUND(cp - (char *)dbmod);
+	*cp = 0;		/* strictly to make our test harness happy */
+	dllview_info = dllview_info_init;
+	dllview_info.size = TDATA_TO_TADDR(hndl->dm.dbsiz);
+	/* Initialize memory context to default heap */
+	dllview_info.context = 0;
+	hndl->dm.context = 0;
+	/* fill in next pointer and size */
+	if (mlist->hnext) {
+		dbmod->next_module = TADDR_TO_TDATA(mlist->hnext->dm.dbthis);
+		dbmod->next_module_size = mlist->hnext->dm.dbsiz;
+	} else {
+		dbmod->next_module_size = 0;
+		dbmod->next_module = 0;
+	}
+	/* allocate memory for on-DSP DLLview debug record */
+	if (!dlthis->myalloc)
+		return;
+	if (!dlthis->myalloc->dload_allocate(dlthis->myalloc, &dllview_info,
+					     HOST_TO_TADDR(sizeof(u32)))) {
+		return;
+	}
+	/* Store load address of .dllview section */
+	hndl->dm.dbthis = dllview_info.load_addr;
+	/* Store memory context (segid) in which .dllview section
+	 * was  allocated */
+	hndl->dm.context = dllview_info.context;
+	mlist->refcount += 1;
+	/* swap bytes in the entire debug record, but not the string table */
+	if (TARGET_ENDIANNESS_DIFFERS(TARGET_BIG_ENDIAN)) {
+		swap_words(dbmod, (char *)dbsec - (char *)dbmod,
+			   DLL_MODULE_BITMAP);
+	}
+	/* Update the DLLview list on the DSP write new record */
+	if (!dlthis->myio->writemem(dlthis->myio, dbmod,
+				    dllview_info.load_addr, &dllview_info,
+				    TADDR_TO_HOST(dllview_info.size))) {
+		return;
+	}
+	/* write new header */
+	mhdr.first_module_size = hndl->dm.dbsiz;
+	mhdr.first_module = TADDR_TO_TDATA(dllview_info.load_addr);
+	/* swap bytes in the module header, if needed */
+	if (TARGET_ENDIANNESS_DIFFERS(TARGET_BIG_ENDIAN)) {
+		swap_words(&mhdr, sizeof(struct modules_header) - sizeof(u16),
+			   MODULES_HEADER_BITMAP);
+	}
+	dllview_info = dllview_info_init;
+	if (!dlthis->myio->writemem(dlthis->myio, &mhdr, mlist->dbthis,
+				    &dllview_info,
+				    sizeof(struct modules_header) -
+				    sizeof(u16))) {
+		return;
+	}
+	/* Add the module handle to this processor's list
+	   of handles with debug info */
+	hndl->dm.hnext = mlist->hnext;
+	if (hndl->dm.hnext)
+		hndl->dm.hnext->dm.hprev = hndl;
+	hndl->dm.hprev = (struct my_handle *)mlist;
+	mlist->hnext = hndl;	/* insert after root */
+}				/* init_module_handle */
+
+/*************************************************************************
+ * Procedure dynamic_unload_module
+ *
+ * Parameters:
+ *	mhandle	A module handle from dynamic_load_module
+ *	syms	Host-side symbol table and malloc/free functions
+ *	alloc	Target-side memory allocation
+ *
+ * Effect:
+ *	The module specified by mhandle is unloaded.  Unloading causes all
+ * target memory to be deallocated, all symbols defined by the module to
+ * be purged, and any host-side storage used by the dynamic loader for
+ * this module to be released.
+ *
+ * Returns:
+ *	Zero for success. On error, the number of errors detected is returned.
+ * Individual errors are reported using syms->error_report().
+ *********************************************************************** */
+int dynamic_unload_module(void *mhandle,
+			  struct dynamic_loader_sym *syms,
+			  struct dynamic_loader_allocate *alloc,
+			  struct dynamic_loader_initialize *init)
+{
+	s16 curr_sect;
+	struct ldr_section_info *asecs;
+	struct my_handle *hndl;
+	struct dbg_mirror_root *root;
+	unsigned errcount = 0;
+	struct ldr_section_info dllview_info = dllview_info_init;
+	struct modules_header mhdr;
+
+	hndl = (struct my_handle *)mhandle;
+	if (!hndl)
+		return 0;	/* if handle is null, nothing to do */
+	/* Clear out the module symbols
+	 * Note that if this is the module that defined MODULES_HEADER
+	 (the head of the target debug list)
+	 * then this operation will blow away that symbol.
+	 It will therefore be impossible for subsequent
+	 * operations to add entries to this un-referenceable list. */
+	if (!syms)
+		return 1;
+	syms->purge_symbol_table(syms, (unsigned)hndl);
+	/* Deallocate target memory for sections
+	 * NOTE: The trampoline section, if created, gets deleted here, too */
+
+	asecs = hndl->secns;
+	if (alloc)
+		for (curr_sect = (hndl->secn_count >> 1); curr_sect > 0;
+		     curr_sect -= 1) {
+			asecs->name = NULL;
+			alloc->dload_deallocate(alloc, asecs++);
+		}
+	root = hndl->dm.hroot;
+	if (!root) {
+		/* there is a debug list containing this module */
+		goto func_end;
+	}
+	if (!hndl->dm.dbthis) {	/* target-side dllview record exists */
+		goto loop_end;
+	}
+	/* Retrieve memory context in which .dllview was allocated */
+	dllview_info.context = hndl->dm.context;
+	if (hndl->dm.hprev == hndl)
+		goto exitunltgt;
+
+	/* target-side dllview record is in list */
+	/* dequeue this record from our GPP-side mirror list */
+	hndl->dm.hprev->dm.hnext = hndl->dm.hnext;
+	if (hndl->dm.hnext)
+		hndl->dm.hnext->dm.hprev = hndl->dm.hprev;
+	/* Update next_module of previous entry in target list
+	 * We are using mhdr here as a surrogate for either a
+	 struct modules_header or a dll_module */
+	if (hndl->dm.hnext) {
+		mhdr.first_module = TADDR_TO_TDATA(hndl->dm.hnext->dm.dbthis);
+		mhdr.first_module_size = hndl->dm.hnext->dm.dbsiz;
+	} else {
+		mhdr.first_module = 0;
+		mhdr.first_module_size = 0;
+	}
+	if (!init)
+		goto exitunltgt;
+
+	if (!init->connect(init)) {
+		dload_syms_error(syms, iconnect);
+		errcount += 1;
+		goto exitunltgt;
+	}
+	/* swap bytes in the module header, if needed */
+	if (TARGET_ENDIANNESS_DIFFERS(hndl->secn_count & 0x1)) {
+		swap_words(&mhdr, sizeof(struct modules_header) - sizeof(u16),
+			   MODULES_HEADER_BITMAP);
+	}
+	if (!init->writemem(init, &mhdr, hndl->dm.hprev->dm.dbthis,
+			    &dllview_info, sizeof(struct modules_header) -
+			    sizeof(mhdr.update_flag))) {
+		dload_syms_error(syms, dlvwrite);
+		errcount += 1;
+	}
+	/* update change counter */
+	root->changes += 1;
+	if (!init->writemem(init, &(root->changes),
+			    root->dbthis + HOST_TO_TADDR
+			    (sizeof(mhdr.first_module) +
+			     sizeof(mhdr.first_module_size)),
+			    &dllview_info, sizeof(mhdr.update_flag))) {
+		dload_syms_error(syms, dlvwrite);
+		errcount += 1;
+	}
+	init->release(init);
+exitunltgt:
+	/* release target storage */
+	dllview_info.size = TDATA_TO_TADDR(hndl->dm.dbsiz);
+	dllview_info.load_addr = hndl->dm.dbthis;
+	if (alloc)
+		alloc->dload_deallocate(alloc, &dllview_info);
+	root->refcount -= 1;
+	/* target-side dllview record exists */
+loop_end:
+#ifndef DEBUG_HEADER_IN_LOADER
+	if (root->refcount <= 0) {
+		/* if all references gone, blow off the header */
+		/* our root symbol may be gone due to the Purge above,
+		   but if not, do not destroy the root */
+		if (syms->find_matching_symbol
+		    (syms, loader_dllview_root) == NULL)
+			syms->dload_deallocate(syms, root);
+	}
+#endif
+func_end:
+	/* there is a debug list containing this module */
+	syms->dload_deallocate(syms, mhandle);	/* release our storage */
+	return errcount;
+}				/* dynamic_unload_module */
+
+#if BITS_PER_AU > BITS_PER_BYTE
+/*************************************************************************
+ * Procedure unpack_name
+ *
+ * Parameters:
+ *	soffset	Byte offset into the string table
+ *
+ * Effect:
+ *	Returns a pointer to the string specified by the offset supplied, or
+ * NULL for error.
+ *
+ *********************************************************************** */
+static char *unpack_name(struct dload_state *dlthis, u32 soffset)
+{
+	u8 tmp, *src;
+	char *dst;
+
+	if (soffset >= dlthis->dfile_hdr.df_strtab_size) {
+		dload_error(dlthis, "Bad string table offset " FMT_UI32,
+			    soffset);
+		return NULL;
+	}
+	src = (uint_least8_t *) dlthis->str_head +
+	    (soffset >> (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE));
+	dst = dlthis->str_temp;
+	if (soffset & 1)
+		*dst++ = *src++;	/* only 1 character in first word */
+	do {
+		tmp = *src++;
+		*dst = (tmp >> BITS_PER_BYTE);
+		if (!(*dst++))
+			break;
+	} while ((*dst++ = tmp & BYTE_MASK));
+	dlthis->temp_len = dst - dlthis->str_temp;
+	/* squirrel away length including terminating null */
+	return dlthis->str_temp;
+}				/* unpack_name */
+#endif
diff --git a/drivers/staging/tidspbridge/dynload/dload_internal.h b/drivers/staging/tidspbridge/dynload/dload_internal.h
new file mode 100644
index 00000000000..302a7c53e12
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/dload_internal.h
@@ -0,0 +1,344 @@
+/*
+ * dload_internal.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _DLOAD_INTERNAL_
+#define _DLOAD_INTERNAL_
+
+#include <linux/types.h>
+
+/*
+ * Internal state definitions for the dynamic loader
+ */
+
+/* type used for relocation intermediate results */
+typedef s32 rvalue;
+
+/* unsigned version of same; must have at least as many bits */
+typedef u32 urvalue;
+
+/*
+ * Dynamic loader configuration constants
+ */
+/* error issued if input has more sections than this limit */
+#define REASONABLE_SECTION_LIMIT 100
+
+/* (Addressable unit) value used to clear BSS section */
+#define DLOAD_FILL_BSS 0
+
+/*
+ * Reorder maps explained (?)
+ *
+ * The doff file format defines a 32-bit pattern used to determine the
+ * byte order of an image being read.  That value is
+ * BYTE_RESHUFFLE_VALUE == 0x00010203
+ * For purposes of the reorder routine, we would rather have the all-is-OK
+ * for 32-bits pattern be 0x03020100.  This first macro makes the
+ * translation from doff file header value to MAP value: */
+#define REORDER_MAP(rawmap) ((rawmap) ^ 0x3030303)
+/* This translation is made in dload_headers.  Thereafter, the all-is-OK
+ * value for the maps stored in dlthis is REORDER_MAP(BYTE_RESHUFFLE_VALUE).
+ * But sadly, not all bits of the doff file are 32-bit integers.
+ * The notable exceptions are strings and image bits.
+ * Strings obey host byte order: */
+#if defined(_BIG_ENDIAN)
+#define HOST_BYTE_ORDER(cookedmap) ((cookedmap) ^ 0x3030303)
+#else
+#define HOST_BYTE_ORDER(cookedmap) (cookedmap)
+#endif
+/* Target bits consist of target AUs (could be bytes, or 16-bits,
+ * or 32-bits) stored as an array in host order.  A target order
+ * map is defined by: */
+#if !defined(_BIG_ENDIAN) || TARGET_AU_BITS > 16
+#define TARGET_ORDER(cookedmap) (cookedmap)
+#elif TARGET_AU_BITS > 8
+#define TARGET_ORDER(cookedmap) ((cookedmap) ^ 0x2020202)
+#else
+#define TARGET_ORDER(cookedmap) ((cookedmap) ^ 0x3030303)
+#endif
+
+/* forward declaration for handle returned by dynamic loader */
+struct my_handle;
+
+/*
+ * a list of module handles, which mirrors the debug list on the target
+ */
+struct dbg_mirror_root {
+	/* must be same as dbg_mirror_list; __DLModules address on target */
+	u32 dbthis;
+	struct my_handle *hnext;	/* must be same as dbg_mirror_list */
+	u16 changes;		/* change counter */
+	u16 refcount;		/* number of modules referencing this root */
+};
+
+struct dbg_mirror_list {
+	u32 dbthis;
+	struct my_handle *hnext, *hprev;
+	struct dbg_mirror_root *hroot;
+	u16 dbsiz;
+	u32 context;	/* Save context for .dllview memory allocation */
+};
+
+#define VARIABLE_SIZE 1
+/*
+ * the structure we actually return as an opaque module handle
+ */
+struct my_handle {
+	struct dbg_mirror_list dm;	/* !!! must be first !!! */
+	/* sections following << 1, LSB is set for big-endian target */
+	u16 secn_count;
+	struct ldr_section_info secns[VARIABLE_SIZE];
+};
+#define MY_HANDLE_SIZE (sizeof(struct my_handle) -\
+			sizeof(struct ldr_section_info))
+/* real size of my_handle */
+
+/*
+ * reduced symbol structure used for symbols during relocation
+ */
+struct local_symbol {
+	s32 value;		/* Relocated symbol value */
+	s32 delta;		/* Original value in input file */
+	s16 secnn;		/* section number */
+	s16 sclass;		/* symbol class */
+};
+
+/*
+ * Trampoline data structures
+ */
+#define TRAMP_NO_GEN_AVAIL              65535
+#define TRAMP_SYM_PREFIX                "__$dbTR__"
+#define TRAMP_SECT_NAME                 ".dbTR"
+/* MUST MATCH THE LENGTH ABOVE!! */
+#define TRAMP_SYM_PREFIX_LEN            9
+/* Includes NULL termination */
+#define TRAMP_SYM_HEX_ASCII_LEN         9
+
+#define GET_CONTAINER(ptr, type, field) ((type *)((unsigned long)ptr -\
+				(unsigned long)(&((type *)0)->field)))
+#ifndef FIELD_OFFSET
+#define FIELD_OFFSET(type, field)       ((unsigned long)(&((type *)0)->field))
+#endif
+
+/*
+    The trampoline code for the target is located in a table called
+    "tramp_gen_info" with is indexed by looking up the index in the table
+    "tramp_map".  The tramp_map index is acquired using the target
+    HASH_FUNC on the relocation type that caused the trampoline.  Each
+    trampoline code table entry MUST follow this format:
+
+    |----------------------------------------------|
+    |  tramp_gen_code_hdr                          |
+    |----------------------------------------------|
+    |  Trampoline image code                       |
+    |  (the raw instruction code for the target)   |
+    |----------------------------------------------|
+    |  Relocation entries for the image code       |
+    |----------------------------------------------|
+
+    This is very similar to how image data is laid out in the DOFF file
+    itself.
+ */
+struct tramp_gen_code_hdr {
+	u32 tramp_code_size;	/*  in BYTES */
+	u32 num_relos;
+	u32 relo_offset;	/*  in BYTES */
+};
+
+struct tramp_img_pkt {
+	struct tramp_img_pkt *next;	/*  MUST BE FIRST */
+	u32 base;
+	struct tramp_gen_code_hdr hdr;
+	u8 payload[VARIABLE_SIZE];
+};
+
+struct tramp_img_dup_relo {
+	struct tramp_img_dup_relo *next;
+	struct reloc_record_t relo;
+};
+
+struct tramp_img_dup_pkt {
+	struct tramp_img_dup_pkt *next;	/*  MUST BE FIRST */
+	s16 secnn;
+	u32 offset;
+	struct image_packet_t img_pkt;
+	struct tramp_img_dup_relo *relo_chain;
+
+	/*  PAYLOAD OF IMG PKT FOLLOWS */
+};
+
+struct tramp_sym {
+	struct tramp_sym *next;	/*  MUST BE FIRST */
+	u32 index;
+	u32 str_index;
+	struct local_symbol sym_info;
+};
+
+struct tramp_string {
+	struct tramp_string *next;	/*  MUST BE FIRST */
+	u32 index;
+	char str[VARIABLE_SIZE];	/*  NULL terminated */
+};
+
+struct tramp_info {
+	u32 tramp_sect_next_addr;
+	struct ldr_section_info sect_info;
+
+	struct tramp_sym *symbol_head;
+	struct tramp_sym *symbol_tail;
+	u32 tramp_sym_next_index;
+	struct local_symbol *final_sym_table;
+
+	struct tramp_string *string_head;
+	struct tramp_string *string_tail;
+	u32 tramp_string_next_index;
+	u32 tramp_string_size;
+	char *final_string_table;
+
+	struct tramp_img_pkt *tramp_pkts;
+	struct tramp_img_dup_pkt *dup_pkts;
+};
+
+/*
+ * States of the .cinit state machine
+ */
+enum cinit_mode {
+	CI_COUNT = 0,		/* expecting a count */
+	CI_ADDRESS,		/* expecting an address */
+#if CINIT_ALIGN < CINIT_ADDRESS	/* handle case of partial address field */
+	CI_PARTADDRESS,		/* have only part of the address */
+#endif
+	CI_COPY,		/* in the middle of copying data */
+	CI_DONE			/* end of .cinit table */
+};
+
+/*
+ * The internal state of the dynamic loader, which is passed around as
+ * an object
+ */
+struct dload_state {
+	struct dynamic_loader_stream *strm;	/* The module input stream */
+	struct dynamic_loader_sym *mysym;	/* Symbols for this session */
+	/* target memory allocator */
+	struct dynamic_loader_allocate *myalloc;
+	struct dynamic_loader_initialize *myio;	/* target memory initializer */
+	unsigned myoptions;	/* Options parameter dynamic_load_module */
+
+	char *str_head;		/* Pointer to string table */
+#if BITS_PER_AU > BITS_PER_BYTE
+	char *str_temp;		/* Pointer to temporary buffer for strings */
+	/* big enough to hold longest string */
+	unsigned temp_len;	/* length of last temporary string */
+	char *xstrings;		/* Pointer to buffer for expanded */
+	/* strings for sec names */
+#endif
+	/* Total size of strings for DLLView section names */
+	unsigned debug_string_size;
+	/* Pointer to parallel section info for allocated sections only */
+	struct doff_scnhdr_t *sect_hdrs;	/* Pointer to section table */
+	struct ldr_section_info *ldr_sections;
+#if TMS32060
+	/* The address of the start of the .bss section */
+	ldr_addr bss_run_base;
+#endif
+	struct local_symbol *local_symtab;	/* Relocation symbol table */
+
+	/* pointer to DL section info for the section being relocated */
+	struct ldr_section_info *image_secn;
+	/* change in run address for current section during relocation */
+	ldr_addr delta_runaddr;
+	ldr_addr image_offset;	/* offset of current packet in section */
+	enum cinit_mode cinit_state;	/* current state of cload_cinit() */
+	int cinit_count;	/* the current count */
+	ldr_addr cinit_addr;	/* the current address */
+	s16 cinit_page;		/* the current page */
+	/* Handle to be returned by dynamic_load_module */
+	struct my_handle *myhandle;
+	unsigned dload_errcount;	/* Total # of errors reported so far */
+	/* Number of target sections that require allocation and relocation */
+	unsigned allocated_secn_count;
+#ifndef TARGET_ENDIANNESS
+	int big_e_target;	/* Target data in big-endian format */
+#endif
+	/* map for reordering bytes, 0 if not needed */
+	u32 reorder_map;
+	struct doff_filehdr_t dfile_hdr;	/* DOFF file header structure */
+	struct doff_verify_rec_t verify;	/* Verify record */
+
+	struct tramp_info tramp;	/* Trampoline data, if needed */
+
+	int relstkidx;		/* index into relocation value stack */
+	/* relocation value stack used in relexp.c */
+	rvalue relstk[STATIC_EXPR_STK_SIZE];
+
+};
+
+#ifdef TARGET_ENDIANNESS
+#define TARGET_BIG_ENDIAN TARGET_ENDIANNESS
+#else
+#define TARGET_BIG_ENDIAN (dlthis->big_e_target)
+#endif
+
+/*
+ * Exports from cload.c to rest of the world
+ */
+extern void dload_error(struct dload_state *dlthis, const char *errtxt, ...);
+extern void dload_syms_error(struct dynamic_loader_sym *syms,
+			     const char *errtxt, ...);
+extern void dload_headers(struct dload_state *dlthis);
+extern void dload_strings(struct dload_state *dlthis, bool sec_names_only);
+extern void dload_sections(struct dload_state *dlthis);
+extern void dload_reorder(void *data, int dsiz, u32 map);
+extern u32 dload_checksum(void *data, unsigned siz);
+
+#if HOST_ENDIANNESS
+extern uint32_t dload_reverse_checksum(void *data, unsigned siz);
+#if (TARGET_AU_BITS > 8) && (TARGET_AU_BITS < 32)
+extern uint32_t dload_reverse_checksum16(void *data, unsigned siz);
+#endif
+#endif
+
+/*
+ * exported by reloc.c
+ */
+extern void dload_relocate(struct dload_state *dlthis, tgt_au_t * data,
+			   struct reloc_record_t *rp, bool * tramps_generated,
+			   bool second_pass);
+
+extern rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t * data,
+			   int fieldsz, int offset, unsigned sgn);
+
+extern int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t * data,
+			int fieldsz, int offset, unsigned sgn);
+
+/*
+ * exported by tramp.c
+ */
+extern bool dload_tramp_avail(struct dload_state *dlthis,
+			      struct reloc_record_t *rp);
+
+int dload_tramp_generate(struct dload_state *dlthis, s16 secnn,
+			 u32 image_offset, struct image_packet_t *ipacket,
+			 struct reloc_record_t *rp);
+
+extern int dload_tramp_pkt_udpate(struct dload_state *dlthis,
+				  s16 secnn, u32 image_offset,
+				  struct image_packet_t *ipacket);
+
+extern int dload_tramp_finalize(struct dload_state *dlthis);
+
+extern void dload_tramp_cleanup(struct dload_state *dlthis);
+
+#endif /* _DLOAD_INTERNAL_ */
diff --git a/drivers/staging/tidspbridge/dynload/doff.h b/drivers/staging/tidspbridge/dynload/doff.h
new file mode 100644
index 00000000000..a7c3145746e
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/doff.h
@@ -0,0 +1,354 @@
+/*
+ * doff.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Structures & definitions used for dynamically loaded modules file format.
+ * This format is a reformatted version of COFF. It optimizes the layout for
+ * the dynamic loader.
+ *
+ * .dof files, when viewed as a sequence of 32-bit integers, look the same
+ * on big-endian and little-endian machines.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _DOFF_H
+#define _DOFF_H
+
+
+#define BYTE_RESHUFFLE_VALUE 0x00010203
+
+/* DOFF file header containing fields categorizing the remainder of the file */
+struct doff_filehdr_t {
+
+	/* string table size, including filename, in bytes */
+	u32 df_strtab_size;
+
+	/* entry point if one exists */
+	u32 df_entrypt;
+
+	/* identifies byte ordering of file;
+	 * always set to BYTE_RESHUFFLE_VALUE */
+	u32 df_byte_reshuffle;
+
+	/* Size of the string table up to and including the last section name */
+	/* Size includes the name of the COFF file also */
+	u32 df_scn_name_size;
+
+#ifndef _BIG_ENDIAN
+	/* number of symbols */
+	u16 df_no_syms;
+
+	/* length in bytes of the longest string, including terminating NULL */
+	/* excludes the name of the file */
+	u16 df_max_str_len;
+
+	/* total number of sections including no-load ones */
+	u16 df_no_scns;
+
+	/* number of sections containing target code allocated or downloaded */
+	u16 df_target_scns;
+
+	/* unique id for dll file format & version */
+	u16 df_doff_version;
+
+	/* identifies ISA */
+	u16 df_target_id;
+
+	/* useful file flags */
+	u16 df_flags;
+
+	/* section reference for entry point, N_UNDEF for none, */
+	/* N_ABS for absolute address */
+	s16 df_entry_secn;
+#else
+	/* length of the longest string, including terminating NULL */
+	u16 df_max_str_len;
+
+	/* number of symbols */
+	u16 df_no_syms;
+
+	/* number of sections containing target code allocated or downloaded */
+	u16 df_target_scns;
+
+	/* total number of sections including no-load ones */
+	u16 df_no_scns;
+
+	/* identifies ISA */
+	u16 df_target_id;
+
+	/* unique id for dll file format & version */
+	u16 df_doff_version;
+
+	/* section reference for entry point, N_UNDEF for none, */
+	/* N_ABS for absolute address */
+	s16 df_entry_secn;
+
+	/* useful file flags */
+	u16 df_flags;
+#endif
+	/* checksum for file header record */
+	u32 df_checksum;
+
+};
+
+/* flags in the df_flags field */
+#define  DF_LITTLE   0x100
+#define  DF_BIG      0x200
+#define  DF_BYTE_ORDER (DF_LITTLE | DF_BIG)
+
+/* Supported processors */
+#define TMS470_ID   0x97
+#define LEAD_ID     0x98
+#define TMS32060_ID 0x99
+#define LEAD3_ID    0x9c
+
+/* Primary processor for loading */
+#if TMS32060
+#define TARGET_ID   TMS32060_ID
+#endif
+
+/* Verification record containing values used to test integrity of the bits */
+struct doff_verify_rec_t {
+
+	/* time and date stamp */
+	u32 dv_timdat;
+
+	/* checksum for all section records */
+	u32 dv_scn_rec_checksum;
+
+	/* checksum for string table */
+	u32 dv_str_tab_checksum;
+
+	/* checksum for symbol table */
+	u32 dv_sym_tab_checksum;
+
+	/* checksum for verification record */
+	u32 dv_verify_rec_checksum;
+
+};
+
+/* String table is an array of null-terminated strings.  The first entry is
+ * the filename, which is added by DLLcreate.  No new structure definitions
+ * are required.
+ */
+
+/* Section Records including information on the corresponding image packets */
+/*
+ *      !!WARNING!!
+ *
+ * This structure is expected to match in form ldr_section_info in
+ * dynamic_loader.h
+ */
+
+struct doff_scnhdr_t {
+
+	s32 ds_offset;		/* offset into string table of name */
+	s32 ds_paddr;		/* RUN address, in target AU */
+	s32 ds_vaddr;		/* LOAD address, in target AU */
+	s32 ds_size;		/* section size, in target AU */
+#ifndef _BIG_ENDIAN
+	u16 ds_page;		/* memory page id */
+	u16 ds_flags;		/* section flags */
+#else
+	u16 ds_flags;		/* section flags */
+	u16 ds_page;		/* memory page id */
+#endif
+	u32 ds_first_pkt_offset;
+	/* Absolute byte offset into the file */
+	/* where the first image record resides */
+
+	s32 ds_nipacks;		/* number of image packets */
+
+};
+
+/* Symbol table entry */
+struct doff_syment_t {
+
+	s32 dn_offset;		/* offset into string table of name */
+	s32 dn_value;		/* value of symbol */
+#ifndef _BIG_ENDIAN
+	s16 dn_scnum;		/* section number */
+	s16 dn_sclass;		/* storage class */
+#else
+	s16 dn_sclass;		/* storage class */
+	s16 dn_scnum;		/* section number, 1-based */
+#endif
+
+};
+
+/* special values for dn_scnum */
+#define  DN_UNDEF  0		/* undefined symbol */
+#define  DN_ABS    (-1)		/* value of symbol is absolute */
+/* special values for dn_sclass */
+#define DN_EXT     2
+#define DN_STATLAB 20
+#define DN_EXTLAB  21
+
+/* Default value of image bits in packet */
+/* Configurable by user on the command line */
+#define IMAGE_PACKET_SIZE 1024
+
+/* An image packet contains a chunk of data from a section along with */
+/* information necessary for its processing. */
+struct image_packet_t {
+
+	s32 num_relocs;		/* number of relocations for */
+	/* this packet */
+
+	s32 packet_size;	/* number of bytes in array */
+	/* "bits" occupied  by */
+	/* valid data.  Could be */
+	/* < IMAGE_PACKET_SIZE to */
+	/* prevent splitting a */
+	/* relocation across packets. */
+	/* Last packet of a section */
+	/* will most likely contain */
+	/* < IMAGE_PACKET_SIZE bytes */
+	/* of valid data */
+
+	s32 img_chksum;		/* Checksum for image packet */
+	/* and the corresponding */
+	/* relocation records */
+
+	u8 *img_data;		/* Actual data in section */
+
+};
+
+/* The relocation structure definition matches the COFF version.  Offsets */
+/* however are relative to the image packet base not the section base. */
+struct reloc_record_t {
+
+	s32 vaddr;
+
+	/* expressed in target AUs */
+
+	union {
+		struct {
+#ifndef _BIG_ENDIAN
+			u8 _offset;	/* bit offset of rel fld */
+			u8 _fieldsz;	/* size of rel fld */
+			u8 _wordsz;	/* # bytes containing rel fld */
+			u8 _dum1;
+			u16 _dum2;
+			u16 _type;
+#else
+			unsigned _dum1:8;
+			unsigned _wordsz:8;	/* # bytes containing rel fld */
+			unsigned _fieldsz:8;	/* size of rel fld */
+			unsigned _offset:8;	/* bit offset of rel fld */
+			u16 _type;
+			u16 _dum2;
+#endif
+		} _r_field;
+
+		struct {
+			u32 _spc;	/* image packet relative PC */
+#ifndef _BIG_ENDIAN
+			u16 _dum;
+			u16 _type;	/* relocation type */
+#else
+			u16 _type;	/* relocation type */
+			u16 _dum;
+#endif
+		} _r_spc;
+
+		struct {
+			u32 _uval;	/* constant value */
+#ifndef _BIG_ENDIAN
+			u16 _dum;
+			u16 _type;	/* relocation type */
+#else
+			u16 _type;	/* relocation type */
+			u16 _dum;
+#endif
+		} _r_uval;
+
+		struct {
+			s32 _symndx;	/* 32-bit sym tbl index */
+#ifndef _BIG_ENDIAN
+			u16 _disp;	/* extra addr encode data */
+			u16 _type;	/* relocation type */
+#else
+			u16 _type;	/* relocation type */
+			u16 _disp;	/* extra addr encode data */
+#endif
+		} _r_sym;
+	} _u_reloc;
+
+};
+
+/* abbreviations for convenience */
+#ifndef TYPE
+#define TYPE      _u_reloc._r_sym._type
+#define UVAL      _u_reloc._r_uval._uval
+#define SYMNDX    _u_reloc._r_sym._symndx
+#define OFFSET    _u_reloc._r_field._offset
+#define FIELDSZ   _u_reloc._r_field._fieldsz
+#define WORDSZ    _u_reloc._r_field._wordsz
+#define R_DISP      _u_reloc._r_sym._disp
+#endif
+
+/**************************************************************************** */
+/* */
+/* Important DOFF macros used for file processing */
+/* */
+/**************************************************************************** */
+
+/* DOFF Versions */
+#define         DOFF0                       0
+
+/* Return the address/size >= to addr that is at a 32-bit boundary */
+/* This assumes that a byte is 8 bits */
+#define         DOFF_ALIGN(addr)            (((addr) + 3) & ~3UL)
+
+/**************************************************************************** */
+/* */
+/* The DOFF section header flags field is laid out as follows: */
+/* */
+/*  Bits 0-3 : Section Type */
+/*  Bit    4 : Set when section requires target memory to be allocated by DL */
+/*  Bit    5 : Set when section requires downloading */
+/*  Bits 8-11: Alignment, same as COFF */
+/* */
+/**************************************************************************** */
+
+/* Enum for DOFF section types (bits 0-3 of flag): See dynamic_loader.h */
+#define DS_SECTION_TYPE_MASK	0xF
+/* DS_ALLOCATE indicates whether a section needs space on the target */
+#define DS_ALLOCATE_MASK            0x10
+/* DS_DOWNLOAD indicates that the loader needs to copy bits */
+#define DS_DOWNLOAD_MASK            0x20
+/* Section alignment requirement in AUs */
+#define DS_ALIGNMENT_SHIFT	8
+
+static inline bool dload_check_type(struct doff_scnhdr_t *sptr, u32 flag)
+{
+	return (sptr->ds_flags & DS_SECTION_TYPE_MASK) == flag;
+}
+static inline bool ds_needs_allocation(struct doff_scnhdr_t *sptr)
+{
+	return sptr->ds_flags & DS_ALLOCATE_MASK;
+}
+
+static inline bool ds_needs_download(struct doff_scnhdr_t *sptr)
+{
+	return sptr->ds_flags & DS_DOWNLOAD_MASK;
+}
+
+static inline int ds_alignment(u16 ds_flags)
+{
+	return 1 << ((ds_flags >> DS_ALIGNMENT_SHIFT) & DS_SECTION_TYPE_MASK);
+}
+
+
+#endif /* _DOFF_H */
diff --git a/drivers/staging/tidspbridge/dynload/getsection.c b/drivers/staging/tidspbridge/dynload/getsection.c
new file mode 100644
index 00000000000..e0b37714dd6
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/getsection.c
@@ -0,0 +1,407 @@
+/*
+ * getsection.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <dspbridge/getsection.h>
+#include "header.h"
+
+/*
+ * Error strings
+ */
+static const char readstrm[] = { "Error reading %s from input stream" };
+static const char seek[] = { "Set file position to %d failed" };
+static const char isiz[] = { "Bad image packet size %d" };
+static const char err_checksum[] = { "Checksum failed on %s" };
+
+static const char err_reloc[] = { "dload_get_section unable to read"
+	    "sections containing relocation entries"
+};
+
+#if BITS_PER_AU > BITS_PER_BYTE
+static const char err_alloc[] = { "Syms->dload_allocate( %d ) failed" };
+static const char stbl[] = { "Bad string table offset " FMT_UI32 };
+#endif
+
+/************************************************************** */
+/********************* SUPPORT FUNCTIONS ********************** */
+/************************************************************** */
+
+#if BITS_PER_AU > BITS_PER_BYTE
+/**************************************************************************
+ * Procedure unpack_sec_name
+ *
+ * Parameters:
+ *  dlthis		Handle from dload_module_open for this module
+ *	soffset	    Byte offset into the string table
+ *  dst         Place to store the expanded string
+ *
+ * Effect:
+ *	Stores a string from the string table into the destination, expanding
+ * it in the process.  Returns a pointer just past the end of the stored
+ * string on success, or NULL on failure.
+ *
+ ************************************************************************ */
+static char *unpack_sec_name(struct dload_state *dlthis, u32 soffset, char *dst)
+{
+	u8 tmp, *src;
+
+	if (soffset >= dlthis->dfile_hdr.df_scn_name_size) {
+		dload_error(dlthis, stbl, soffset);
+		return NULL;
+	}
+	src = (u8 *) dlthis->str_head +
+	    (soffset >> (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE));
+	if (soffset & 1)
+		*dst++ = *src++;	/* only 1 character in first word */
+	do {
+		tmp = *src++;
+		*dst = (tmp >> BITS_PER_BYTE)
+		    if (!(*dst++))
+			break;
+	} while ((*dst++ = tmp & BYTE_MASK));
+
+	return dst;
+}
+
+/**************************************************************************
+ * Procedure expand_sec_names
+ *
+ * Parameters:
+ *  dlthis		Handle from dload_module_open for this module
+ *
+ * Effect:
+ *    Allocates a buffer, unpacks and copies strings from string table into it.
+ * Stores a pointer to the buffer into a state variable.
+ ************************************************************************* */
+static void expand_sec_names(struct dload_state *dlthis)
+{
+	char *xstrings, *curr, *next;
+	u32 xsize;
+	u16 sec;
+	struct ldr_section_info *shp;
+	/* assume worst-case size requirement */
+	xsize = dlthis->dfile_hdr.df_max_str_len * dlthis->dfile_hdr.df_no_scns;
+	xstrings = (char *)dlthis->mysym->dload_allocate(dlthis->mysym, xsize);
+	if (xstrings == NULL) {
+		dload_error(dlthis, err_alloc, xsize);
+		return;
+	}
+	dlthis->xstrings = xstrings;
+	/* For each sec, copy and expand its name */
+	curr = xstrings;
+	for (sec = 0; sec < dlthis->dfile_hdr.df_no_scns; sec++) {
+		shp = (struct ldr_section_info *)&dlthis->sect_hdrs[sec];
+		next = unpack_sec_name(dlthis, *(u32 *) &shp->name, curr);
+		if (next == NULL)
+			break;	/* error */
+		shp->name = curr;
+		curr = next;
+	}
+}
+
+#endif
+
+/************************************************************** */
+/********************* EXPORTED FUNCTIONS ********************* */
+/************************************************************** */
+
+/**************************************************************************
+ * Procedure dload_module_open
+ *
+ * Parameters:
+ *	module	The input stream that supplies the module image
+ *	syms	Host-side malloc/free and error reporting functions.
+ *			Other methods are unused.
+ *
+ * Effect:
+ *	Reads header information from a dynamic loader module using the
+    specified
+ * stream object, and returns a handle for the module information.  This
+ * handle may be used in subsequent query calls to obtain information
+ * contained in the module.
+ *
+ * Returns:
+ *	NULL if an error is encountered, otherwise a module handle for use
+ * in subsequent operations.
+ ************************************************************************* */
+void *dload_module_open(struct dynamic_loader_stream *module,
+				    struct dynamic_loader_sym *syms)
+{
+	struct dload_state *dlthis;	/* internal state for this call */
+	unsigned *dp, sz;
+	u32 sec_start;
+#if BITS_PER_AU <= BITS_PER_BYTE
+	u16 sec;
+#endif
+
+	/* Check that mandatory arguments are present */
+	if (!module || !syms) {
+		if (syms != NULL)
+			dload_syms_error(syms, "Required parameter is NULL");
+
+		return NULL;
+	}
+
+	dlthis = (struct dload_state *)
+	    syms->dload_allocate(syms, sizeof(struct dload_state));
+	if (!dlthis) {
+		/* not enough storage */
+		dload_syms_error(syms, "Can't allocate module info");
+		return NULL;
+	}
+
+	/* clear our internal state */
+	dp = (unsigned *)dlthis;
+	for (sz = sizeof(struct dload_state) / sizeof(unsigned);
+	     sz > 0; sz -= 1)
+		*dp++ = 0;
+
+	dlthis->strm = module;
+	dlthis->mysym = syms;
+
+	/* read in the doff image and store in our state variable */
+	dload_headers(dlthis);
+
+	if (!dlthis->dload_errcount)
+		dload_strings(dlthis, true);
+
+	/* skip ahead past the unread portion of the string table */
+	sec_start = sizeof(struct doff_filehdr_t) +
+	    sizeof(struct doff_verify_rec_t) +
+	    BYTE_TO_HOST(DOFF_ALIGN(dlthis->dfile_hdr.df_strtab_size));
+
+	if (dlthis->strm->set_file_posn(dlthis->strm, sec_start) != 0) {
+		dload_error(dlthis, seek, sec_start);
+		return NULL;
+	}
+
+	if (!dlthis->dload_errcount)
+		dload_sections(dlthis);
+
+	if (dlthis->dload_errcount) {
+		dload_module_close(dlthis);	/* errors, blow off our state */
+		dlthis = NULL;
+		return NULL;
+	}
+#if BITS_PER_AU > BITS_PER_BYTE
+	/* Expand all section names from the string table into the */
+	/* state variable, and convert section names from a relative */
+	/* string table offset to a pointers to the expanded string. */
+	expand_sec_names(dlthis);
+#else
+	/* Convert section names from a relative string table offset */
+	/* to a pointer into the string table. */
+	for (sec = 0; sec < dlthis->dfile_hdr.df_no_scns; sec++) {
+		struct ldr_section_info *shp =
+		    (struct ldr_section_info *)&dlthis->sect_hdrs[sec];
+		shp->name = dlthis->str_head + *(u32 *) &shp->name;
+	}
+#endif
+
+	return dlthis;
+}
+
+/***************************************************************************
+ * Procedure dload_get_section_info
+ *
+ * Parameters:
+ *  minfo		Handle from dload_module_open for this module
+ *	section_name	Pointer to the string name of the section desired
+ *	section_info	Address of a section info structure pointer to be
+ *			initialized
+ *
+ * Effect:
+ *	Finds the specified section in the module information, and initializes
+ * the provided struct ldr_section_info pointer.
+ *
+ * Returns:
+ *	true for success, false for section not found
+ ************************************************************************* */
+int dload_get_section_info(void *minfo, const char *section_name,
+			   const struct ldr_section_info **const section_info)
+{
+	struct dload_state *dlthis;
+	struct ldr_section_info *shp;
+	u16 sec;
+
+	dlthis = (struct dload_state *)minfo;
+	if (!dlthis)
+		return false;
+
+	for (sec = 0; sec < dlthis->dfile_hdr.df_no_scns; sec++) {
+		shp = (struct ldr_section_info *)&dlthis->sect_hdrs[sec];
+		if (strcmp(section_name, shp->name) == 0) {
+			*section_info = shp;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+#define IPH_SIZE (sizeof(struct image_packet_t) - sizeof(u32))
+
+/**************************************************************************
+ * Procedure dload_get_section
+ *
+ * Parameters:
+ *  minfo		Handle from dload_module_open for this module
+ *	section_info	Pointer to a section info structure for the desired
+ *			section
+ *	section_data	Buffer to contain the section initialized data
+ *
+ * Effect:
+ *	Copies the initialized data for the specified section into the
+ * supplied buffer.
+ *
+ * Returns:
+ *	true for success, false for section not found
+ ************************************************************************* */
+int dload_get_section(void *minfo,
+		      const struct ldr_section_info *section_info,
+		      void *section_data)
+{
+	struct dload_state *dlthis;
+	u32 pos;
+	struct doff_scnhdr_t *sptr = NULL;
+	s32 nip;
+	struct image_packet_t ipacket;
+	s32 ipsize;
+	u32 checks;
+	s8 *dest = (s8 *) section_data;
+
+	dlthis = (struct dload_state *)minfo;
+	if (!dlthis)
+		return false;
+	sptr = (struct doff_scnhdr_t *)section_info;
+	if (sptr == NULL)
+		return false;
+
+	/* skip ahead to the start of the first packet */
+	pos = BYTE_TO_HOST(DOFF_ALIGN((u32) sptr->ds_first_pkt_offset));
+	if (dlthis->strm->set_file_posn(dlthis->strm, pos) != 0) {
+		dload_error(dlthis, seek, pos);
+		return false;
+	}
+
+	nip = sptr->ds_nipacks;
+	while ((nip -= 1) >= 0) {	/* for each packet */
+		/* get the fixed header bits */
+		if (dlthis->strm->read_buffer(dlthis->strm, &ipacket,
+					      IPH_SIZE) != IPH_SIZE) {
+			dload_error(dlthis, readstrm, "image packet");
+			return false;
+		}
+		/* reorder the header if need be */
+		if (dlthis->reorder_map)
+			dload_reorder(&ipacket, IPH_SIZE, dlthis->reorder_map);
+
+		/* Now read the packet image bits. Note: round the size up to
+		 * the next multiple of 4 bytes; this is what checksum
+		 * routines want. */
+		ipsize = BYTE_TO_HOST(DOFF_ALIGN(ipacket.packet_size));
+		if (ipsize > BYTE_TO_HOST(IMAGE_PACKET_SIZE)) {
+			dload_error(dlthis, isiz, ipsize);
+			return false;
+		}
+		if (dlthis->strm->read_buffer
+		    (dlthis->strm, dest, ipsize) != ipsize) {
+			dload_error(dlthis, readstrm, "image packet");
+			return false;
+		}
+		/* reorder the bytes if need be */
+#if !defined(_BIG_ENDIAN) || (TARGET_AU_BITS > 16)
+		if (dlthis->reorder_map)
+			dload_reorder(dest, ipsize, dlthis->reorder_map);
+
+		checks = dload_checksum(dest, ipsize);
+#else
+		if (dlthis->dfile_hdr.df_byte_reshuffle !=
+		    TARGET_ORDER(REORDER_MAP(BYTE_RESHUFFLE_VALUE))) {
+			/* put image bytes in big-endian order, not PC order */
+			dload_reorder(dest, ipsize,
+				      TARGET_ORDER(dlthis->
+						dfile_hdr.df_byte_reshuffle));
+		}
+#if TARGET_AU_BITS > 8
+		checks = dload_reverse_checksum16(dest, ipsize);
+#else
+		checks = dload_reverse_checksum(dest, ipsize);
+#endif
+#endif
+		checks += dload_checksum(&ipacket, IPH_SIZE);
+
+		/* NYI: unable to handle relocation entries here.  Reloc
+		 * entries referring to fields that span the packet boundaries
+		 * may result in packets of sizes that are not multiple of
+		 * 4 bytes. Our checksum implementation works on 32-bit words
+		 * only. */
+		if (ipacket.num_relocs != 0) {
+			dload_error(dlthis, err_reloc, ipsize);
+			return false;
+		}
+
+		if (~checks) {
+			dload_error(dlthis, err_checksum, "image packet");
+			return false;
+		}
+
+		/*Advance destination ptr by the size of the just-read packet */
+		dest += ipsize;
+	}
+
+	return true;
+}
+
+/***************************************************************************
+ * Procedure dload_module_close
+ *
+ * Parameters:
+ *  minfo		Handle from dload_module_open for this module
+ *
+ * Effect:
+ *	Releases any storage associated with the module handle.  On return,
+ * the module handle is invalid.
+ *
+ * Returns:
+ *	Zero for success. On error, the number of errors detected is returned.
+ * Individual errors are reported using syms->error_report(), where syms was
+ * an argument to dload_module_open
+ ************************************************************************* */
+void dload_module_close(void *minfo)
+{
+	struct dload_state *dlthis;
+
+	dlthis = (struct dload_state *)minfo;
+	if (!dlthis)
+		return;
+
+	if (dlthis->str_head)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						dlthis->str_head);
+
+	if (dlthis->sect_hdrs)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						dlthis->sect_hdrs);
+
+#if BITS_PER_AU > BITS_PER_BYTE
+	if (dlthis->xstrings)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						dlthis->xstrings);
+
+#endif
+
+	dlthis->mysym->dload_deallocate(dlthis->mysym, dlthis);
+}
diff --git a/drivers/staging/tidspbridge/dynload/header.h b/drivers/staging/tidspbridge/dynload/header.h
new file mode 100644
index 00000000000..5b50a15a343
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/header.h
@@ -0,0 +1,49 @@
+/*
+ * header.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/string.h>
+#define DL_STRCMP  strcmp
+
+/* maximum parenthesis nesting in relocation stack expressions */
+#define STATIC_EXPR_STK_SIZE 10
+
+#include <linux/types.h>
+
+#include "doff.h"
+#include <dspbridge/dynamic_loader.h>
+#include "params.h"
+#include "dload_internal.h"
+#include "reloc_table.h"
+
+/*
+ * Plausibility limits
+ *
+ * These limits are imposed upon the input DOFF file as a check for validity.
+ * They are hard limits, in that the load will fail if they are exceeded.
+ * The numbers selected are arbitrary, in that the loader implementation does
+ * not require these limits.
+ */
+
+/* maximum number of bytes in string table */
+#define MAX_REASONABLE_STRINGTAB (0x100000)
+/* maximum number of code,data,etc. sections */
+#define MAX_REASONABLE_SECTIONS (200)
+/* maximum number of linker symbols */
+#define MAX_REASONABLE_SYMBOLS (100000)
+
+/* shift count to align F_BIG with DLOAD_LITTLE */
+#define ALIGN_COFF_ENDIANNESS 7
+#define ENDIANNESS_MASK (DF_BYTE_ORDER >> ALIGN_COFF_ENDIANNESS)
diff --git a/drivers/staging/tidspbridge/dynload/module_list.h b/drivers/staging/tidspbridge/dynload/module_list.h
new file mode 100644
index 00000000000..a216bb131a4
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/module_list.h
@@ -0,0 +1,159 @@
+/*
+ * dspbridge/mpu_driver/src/dynload/module_list.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ * This C header file gives the layout of the data structure created by the
+ * dynamic loader to describe the set of modules loaded into the DSP.
+ *
+ * Linked List Structure:
+ * ----------------------
+ * The data structure defined here is a singly-linked list.  The list
+ * represents the set of modules which are currently loaded in the DSP memory.
+ * The first entry in the list is a header record which contains a flag
+ * representing the state of the list.  The rest of the entries in the list
+ * are module records.
+ *
+ * Global symbol  _DLModules designates the first record in the list (i.e. the
+ * header record).  This symbol must be defined in any program that wishes to
+ * use DLLview plug-in.
+ *
+ * String Representation:
+ * ----------------------
+ * The string names of the module and its sections are stored in a block of
+ * memory which follows the module record itself.  The strings are ordered:
+ * module name first, followed by section names in order from the first
+ * section to the last.  String names are tightly packed arrays of 8-bit
+ * characters (two characters per 16-bit word on the C55x).  Strings are
+ * zero-byte-terminated.
+ *
+ * Creating and updating the list:
+ * -------------------------------
+ * Upon loading a new module into the DSP memory the dynamic loader inserts a
+ * new module record as the first module record in the list.  The fields of
+ * this module record are initialized to reflect the properties of the module.
+ * The dynamic loader does NOT increment the flag/counter in the list's header
+ * record.
+ *
+ * Upon unloading a module from the DSP memory the dynamic loader removes the
+ * module's record from this list.  The dynamic loader also increments the
+ * flag/counter in the list's header record to indicate that the list has been
+ * changed.
+ */
+
+#ifndef _MODULE_LIST_H_
+#define _MODULE_LIST_H_
+
+#include <linux/types.h>
+
+/* Global pointer to the modules_header structure */
+#define MODULES_HEADER "_DLModules"
+#define MODULES_HEADER_NO_UNDERSCORE "DLModules"
+
+/* Initial version number */
+#define INIT_VERSION 1
+
+/* Verification number -- to be recorded in each module record */
+#define VERIFICATION 0x79
+
+/* forward declarations */
+struct dll_module;
+struct dll_sect;
+
+/* the first entry in the list is the modules_header record;
+ * its address is contained in the global _DLModules pointer */
+struct modules_header {
+
+	/*
+	 * Address of the first dll_module record in the list or NULL.
+	 * Note: for C55x this is a word address (C55x data is
+	 * word-addressable)
+	 */
+	u32 first_module;
+
+	/* Combined storage size (in target addressable units) of the
+	 * dll_module record which follows this header record, or zero
+	 * if the list is empty.  This size includes the module's string table.
+	 * Note: for C55x the unit is a 16-bit word */
+	u16 first_module_size;
+
+	/* Counter is incremented whenever a module record is removed from
+	 * the list */
+	u16 update_flag;
+
+};
+
+/* for each 32-bits in above structure, a bitmap, LSB first, whose bits are:
+ * 0 => a 32-bit value, 1 => 2 16-bit values */
+/* swapping bitmap for type modules_header */
+#define MODULES_HEADER_BITMAP 0x2
+
+/* information recorded about each section in a module */
+struct dll_sect {
+
+	/* Load-time address of the section.
+	 * Note: for C55x this is a byte address for program sections, and
+	 * a word address for data sections.  C55x program memory is
+	 * byte-addressable, while data memory is word-addressable. */
+	u32 sect_load_adr;
+
+	/* Run-time address of the section.
+	 * Note 1: for C55x this is a byte address for program sections, and
+	 * a word address for data sections.
+	 * Note 2: for C55x two most significant bits of this field indicate
+	 * the section type: '00' for a code section, '11' for a data section
+	 * (C55 addresses are really only 24-bits wide). */
+	u32 sect_run_adr;
+
+};
+
+/* the rest of the entries in the list are module records */
+struct dll_module {
+
+	/* Address of the next dll_module record in the list, or 0 if this is
+	 * the last record in the list.
+	 * Note: for C55x this is a word address (C55x data is
+	 * word-addressable) */
+	u32 next_module;
+
+	/* Combined storage size (in target addressable units) of the
+	 * dll_module record which follows this one, or zero if this is the
+	 * last record in the list.  This size includes the module's string
+	 * table.
+	 * Note: for C55x the unit is a 16-bit word. */
+	u16 next_module_size;
+
+	/* version number of the tooling; set to INIT_VERSION for Phase 1 */
+	u16 version;
+
+	/* the verification word; set to VERIFICATION */
+	u16 verification;
+
+	/* Number of sections in the sects array */
+	u16 num_sects;
+
+	/* Module's "unique" id; copy of the timestamp from the host
+	 * COFF file */
+	u32 timestamp;
+
+	/* Array of num_sects elements of the module's section records */
+	struct dll_sect sects[1];
+};
+
+/* for each 32 bits in above structure, a bitmap, LSB first, whose bits are:
+ * 0 => a 32-bit value, 1 => 2 16-bit values */
+#define DLL_MODULE_BITMAP 0x6	/* swapping bitmap for type dll_module */
+
+#endif /* _MODULE_LIST_H_ */
diff --git a/drivers/staging/tidspbridge/dynload/params.h b/drivers/staging/tidspbridge/dynload/params.h
new file mode 100644
index 00000000000..d797fcd3b66
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/params.h
@@ -0,0 +1,226 @@
+/*
+ * params.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file defines host and target properties for all machines
+ * supported by the dynamic loader.  To be tedious...
+ *
+ * host: the machine on which the dynamic loader runs
+ * target: the machine that the dynamic loader is loading
+ *
+ * Host and target may or may not be the same, depending upon the particular
+ * use.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/******************************************************************************
+ *
+ *							Host Properties
+ *
+ **************************************************************************** */
+
+#define BITS_PER_BYTE 8		/* bits in the standard PC/SUN byte */
+#define LOG_BITS_PER_BYTE 3	/* log base 2 of same */
+#define BYTE_MASK ((1U<<BITS_PER_BYTE)-1)
+
+#if defined(__TMS320C55X__) || defined(_TMS320C5XX)
+#define BITS_PER_AU 16
+#define LOG_BITS_PER_AU 4
+ /* use this print string in error messages for uint32_t */
+#define FMT_UI32 "0x%lx"
+#define FMT8_UI32 "%08lx"	/* same but no 0x, fixed width field */
+#else
+/* bits in the smallest addressable data storage unit */
+#define BITS_PER_AU 8
+/* log base 2 of the same; useful for shift counts */
+#define LOG_BITS_PER_AU 3
+#define FMT_UI32 "0x%x"
+#define FMT8_UI32 "%08x"
+#endif
+
+/* generic fastest method for swapping bytes and shorts */
+#define SWAP32BY16(zz) (((zz) << 16) | ((zz) >> 16))
+#define SWAP16BY8(zz) (((zz) << 8) | ((zz) >> 8))
+
+/* !! don't be tempted to insert type definitions here; use <stdint.h> !! */
+
+/******************************************************************************
+ *
+ *							Target Properties
+ *
+ **************************************************************************** */
+
+/*-------------------------------------------------------------------------- */
+/* TMS320C6x Target Specific Parameters (byte-addressable) */
+/*-------------------------------------------------------------------------- */
+#if TMS32060
+#define MEMORG          0x0L	/* Size of configured memory */
+#define MEMSIZE         0x0L	/* (full address space) */
+
+#define CINIT_ALIGN     8	/* alignment of cinit record in TDATA AUs */
+#define CINIT_COUNT	4	/* width of count field in TDATA AUs */
+#define CINIT_ADDRESS	4	/* width of address field in TDATA AUs */
+#define CINIT_PAGE_BITS	0	/* Number of LSBs of address that
+				 * are page number */
+
+#define LENIENT_SIGNED_RELEXPS 0	/* DOES SIGNED ALLOW MAX UNSIGNED */
+
+#undef TARGET_ENDIANNESS	/* may be big or little endian */
+
+/* align a target address to a word boundary */
+#define TARGET_WORD_ALIGN(zz) (((zz) + 0x3) & -0x4)
+#endif
+
+/*--------------------------------------------------------------------------
+ *
+ *			DEFAULT SETTINGS and DERIVED PROPERTIES
+ *
+ * This section establishes defaults for values not specified above
+ *-------------------------------------------------------------------------- */
+#ifndef TARGET_AU_BITS
+#define TARGET_AU_BITS 8	/* width of the target addressable unit */
+#define LOG_TARGET_AU_BITS 3	/* log2 of same */
+#endif
+
+#ifndef CINIT_DEFAULT_PAGE
+#define CINIT_DEFAULT_PAGE 0	/* default .cinit page number */
+#endif
+
+#ifndef DATA_RUN2LOAD
+#define DATA_RUN2LOAD(zz) (zz)	/* translate data run address to load address */
+#endif
+
+#ifndef DBG_LIST_PAGE
+#define DBG_LIST_PAGE 0		/* page number for .dllview section */
+#endif
+
+#ifndef TARGET_WORD_ALIGN
+/* align a target address to a word boundary */
+#define TARGET_WORD_ALIGN(zz) (zz)
+#endif
+
+#ifndef TDATA_TO_TADDR
+#define TDATA_TO_TADDR(zz) (zz)	/* target data address to target AU address */
+#define TADDR_TO_TDATA(zz) (zz)	/* target AU address to target data address */
+#define TDATA_AU_BITS	TARGET_AU_BITS	/* bits per data AU */
+#define LOG_TDATA_AU_BITS	LOG_TARGET_AU_BITS
+#endif
+
+/*
+ *
+ * Useful properties and conversions derived from the above
+ *
+ */
+
+/*
+ * Conversions between host and target addresses
+ */
+#if LOG_BITS_PER_AU == LOG_TARGET_AU_BITS
+/* translate target addressable unit to host address */
+#define TADDR_TO_HOST(x) (x)
+/* translate host address to target addressable unit */
+#define HOST_TO_TADDR(x) (x)
+#elif LOG_BITS_PER_AU > LOG_TARGET_AU_BITS
+#define TADDR_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU-LOG_TARGET_AU_BITS))
+#define HOST_TO_TADDR(x) ((x) << (LOG_BITS_PER_AU-LOG_TARGET_AU_BITS))
+#else
+#define TADDR_TO_HOST(x) ((x) << (LOG_TARGET_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TADDR(x) ((x) >> (LOG_TARGET_AU_BITS-LOG_BITS_PER_AU))
+#endif
+
+#if LOG_BITS_PER_AU == LOG_TDATA_AU_BITS
+/* translate target addressable unit to host address */
+#define TDATA_TO_HOST(x) (x)
+/* translate host address to target addressable unit */
+#define HOST_TO_TDATA(x) (x)
+/* translate host address to target addressable unit, round up */
+#define HOST_TO_TDATA_ROUND(x) (x)
+/* byte offset to host offset, rounded up for TDATA size */
+#define BYTE_TO_HOST_TDATA_ROUND(x) BYTE_TO_HOST_ROUND(x)
+#elif LOG_BITS_PER_AU > LOG_TDATA_AU_BITS
+#define TDATA_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define HOST_TO_TDATA(x) ((x) << (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define HOST_TO_TDATA_ROUND(x) ((x) << (LOG_BITS_PER_AU-LOG_TDATA_AU_BITS))
+#define BYTE_TO_HOST_TDATA_ROUND(x) BYTE_TO_HOST_ROUND(x)
+#else
+#define TDATA_TO_HOST(x) ((x) << (LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TDATA(x) ((x) >> (LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define HOST_TO_TDATA_ROUND(x) (((x) +\
+				(1<<(LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))-1) >>\
+				(LOG_TDATA_AU_BITS-LOG_BITS_PER_AU))
+#define BYTE_TO_HOST_TDATA_ROUND(x) (BYTE_TO_HOST((x) +\
+	(1<<(LOG_TDATA_AU_BITS-LOG_BITS_PER_BYTE))-1) &\
+	-(TDATA_AU_BITS/BITS_PER_AU))
+#endif
+
+/*
+ * Input in DOFF format is always expresed in bytes, regardless of loading host
+ * so we wind up converting from bytes to target and host units even when the
+ * host is not a byte machine.
+ */
+#if LOG_BITS_PER_AU == LOG_BITS_PER_BYTE
+#define BYTE_TO_HOST(x) (x)
+#define BYTE_TO_HOST_ROUND(x) (x)
+#define HOST_TO_BYTE(x) (x)
+#elif LOG_BITS_PER_AU >= LOG_BITS_PER_BYTE
+#define BYTE_TO_HOST(x) ((x) >> (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#define BYTE_TO_HOST_ROUND(x) ((x + (BITS_PER_AU/BITS_PER_BYTE-1)) >>\
+			      (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#define HOST_TO_BYTE(x) ((x) << (LOG_BITS_PER_AU - LOG_BITS_PER_BYTE))
+#else
+/* lets not try to deal with sub-8-bit byte machines */
+#endif
+
+#if LOG_TARGET_AU_BITS == LOG_BITS_PER_BYTE
+/* translate target addressable unit to byte address */
+#define TADDR_TO_BYTE(x) (x)
+/* translate byte address to target addressable unit */
+#define BYTE_TO_TADDR(x) (x)
+#elif LOG_TARGET_AU_BITS > LOG_BITS_PER_BYTE
+#define TADDR_TO_BYTE(x) ((x) << (LOG_TARGET_AU_BITS-LOG_BITS_PER_BYTE))
+#define BYTE_TO_TADDR(x) ((x) >> (LOG_TARGET_AU_BITS-LOG_BITS_PER_BYTE))
+#else
+/* lets not try to deal with sub-8-bit byte machines */
+#endif
+
+#ifdef _BIG_ENDIAN
+#define HOST_ENDIANNESS 1
+#else
+#define HOST_ENDIANNESS 0
+#endif
+
+#ifdef TARGET_ENDIANNESS
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (HOST_ENDIANNESS^TARGET_ENDIANNESS)
+#elif HOST_ENDIANNESS
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (!(rtend))
+#else
+#define TARGET_ENDIANNESS_DIFFERS(rtend) (rtend)
+#endif
+
+/* the unit in which we process target image data */
+#if TARGET_AU_BITS <= 8
+typedef u8 tgt_au_t;
+#elif TARGET_AU_BITS <= 16
+typedef u16 tgt_au_t;
+#else
+typedef u32 tgt_au_t;
+#endif
+
+/* size of that unit */
+#if TARGET_AU_BITS < BITS_PER_AU
+#define TGTAU_BITS BITS_PER_AU
+#define LOG_TGTAU_BITS LOG_BITS_PER_AU
+#else
+#define TGTAU_BITS TARGET_AU_BITS
+#define LOG_TGTAU_BITS LOG_TARGET_AU_BITS
+#endif
diff --git a/drivers/staging/tidspbridge/dynload/reloc.c b/drivers/staging/tidspbridge/dynload/reloc.c
new file mode 100644
index 00000000000..7b28c07ed7c
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/reloc.c
@@ -0,0 +1,484 @@
+/*
+ * reloc.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "header.h"
+
+#if TMS32060
+/* the magic symbol for the start of BSS */
+static const char bsssymbol[] = { ".bss" };
+#endif
+
+#if TMS32060
+#include "reloc_table_c6000.c"
+#endif
+
+#if TMS32060
+/* From coff.h - ignore these relocation operations */
+#define R_C60ALIGN     0x76	/* C60: Alignment info for compressor */
+#define R_C60FPHEAD    0x77	/* C60: Explicit assembly directive */
+#define R_C60NOCMP    0x100	/* C60: Don't compress this code scn */
+#endif
+
+/**************************************************************************
+ * Procedure dload_unpack
+ *
+ * Parameters:
+ *	data	pointer to storage unit containing lowest host address of
+ *		image data
+ *	fieldsz	Size of bit field, 0 < fieldsz <= sizeof(rvalue)*BITS_PER_AU
+ *	offset	Offset from LSB, 0 <= offset < BITS_PER_AU
+ *	sgn	Signedness of the field (ROP_SGN, ROP_UNS, ROP_MAX, ROP_ANY)
+ *
+ * Effect:
+ *	Extracts the specified field and returns it.
+ ************************************************************************* */
+rvalue dload_unpack(struct dload_state *dlthis, tgt_au_t * data, int fieldsz,
+		    int offset, unsigned sgn)
+{
+	register rvalue objval;
+	register int shift, direction;
+	register tgt_au_t *dp = data;
+
+	fieldsz -= 1;	/* avoid nastiness with 32-bit shift of 32-bit value */
+	/* * collect up enough bits to contain the desired field */
+	if (TARGET_BIG_ENDIAN) {
+		dp += (fieldsz + offset) >> LOG_TGTAU_BITS;
+		direction = -1;
+	} else
+		direction = 1;
+	objval = *dp >> offset;
+	shift = TGTAU_BITS - offset;
+	while (shift <= fieldsz) {
+		dp += direction;
+		objval += (rvalue) *dp << shift;
+		shift += TGTAU_BITS;
+	}
+
+	/* * sign or zero extend the value appropriately */
+	if (sgn == ROP_UNS)
+		objval &= (2 << fieldsz) - 1;
+	else {
+		shift = sizeof(rvalue) * BITS_PER_AU - 1 - fieldsz;
+		objval = (objval << shift) >> shift;
+	}
+
+	return objval;
+
+}				/* dload_unpack */
+
+/**************************************************************************
+ * Procedure dload_repack
+ *
+ * Parameters:
+ *	val		Value to insert
+ *	data	Pointer to storage unit containing lowest host address of
+ * 		image data
+ *	fieldsz	Size of bit field, 0 < fieldsz <= sizeof(rvalue)*BITS_PER_AU
+ *	offset	Offset from LSB, 0 <= offset < BITS_PER_AU
+ *	sgn	Signedness of the field (ROP_SGN, ROP_UNS, ROP_MAX, ROP_ANY)
+ *
+ * Effect:
+ *	Stuffs the specified value in the specified field.  Returns 0 for
+ *	success
+ * or 1 if the value will not fit in the specified field according to the
+ * specified signedness rule.
+ ************************************************************************* */
+static const unsigned char ovf_limit[] = { 1, 2, 2 };
+
+int dload_repack(struct dload_state *dlthis, rvalue val, tgt_au_t * data,
+		 int fieldsz, int offset, unsigned sgn)
+{
+	register urvalue objval, mask;
+	register int shift, direction;
+	register tgt_au_t *dp = data;
+
+	fieldsz -= 1;	/* avoid nastiness with 32-bit shift of 32-bit value */
+	/* clip the bits */
+	mask = (2UL << fieldsz) - 1;
+	objval = (val & mask);
+	/* * store the bits through the specified mask */
+	if (TARGET_BIG_ENDIAN) {
+		dp += (fieldsz + offset) >> LOG_TGTAU_BITS;
+		direction = -1;
+	} else
+		direction = 1;
+
+	/* insert LSBs */
+	*dp = (*dp & ~(mask << offset)) + (objval << offset);
+	shift = TGTAU_BITS - offset;
+	/* align mask and objval with AU boundary */
+	objval >>= shift;
+	mask >>= shift;
+
+	while (mask) {
+		dp += direction;
+		*dp = (*dp & ~mask) + objval;
+		objval >>= TGTAU_BITS;
+		mask >>= TGTAU_BITS;
+	}
+
+	/*
+	 * check for overflow
+	 */
+	if (sgn) {
+		unsigned tmp = (val >> fieldsz) + (sgn & 0x1);
+		if (tmp > ovf_limit[sgn - 1])
+			return 1;
+	}
+	return 0;
+
+}				/* dload_repack */
+
+/* lookup table for the scaling amount in a C6x instruction */
+#if TMS32060
+#define SCALE_BITS 4		/* there are 4 bits in the scale field */
+#define SCALE_MASK 0x7		/* we really only use the bottom 3 bits */
+static const u8 c60_scale[SCALE_MASK + 1] = {
+	1, 0, 0, 0, 1, 1, 2, 2
+};
+#endif
+
+/**************************************************************************
+ * Procedure dload_relocate
+ *
+ * Parameters:
+ *	data	Pointer to base of image data
+ *	rp		Pointer to relocation operation
+ *
+ * Effect:
+ *	Performs the specified relocation operation
+ ************************************************************************* */
+void dload_relocate(struct dload_state *dlthis, tgt_au_t * data,
+		    struct reloc_record_t *rp, bool *tramps_generated,
+		    bool second_pass)
+{
+	rvalue val, reloc_amt, orig_val = 0;
+	unsigned int fieldsz = 0;
+	unsigned int offset = 0;
+	unsigned int reloc_info = 0;
+	unsigned int reloc_action = 0;
+	register int rx = 0;
+	rvalue *stackp = NULL;
+	int top;
+	struct local_symbol *svp = NULL;
+#ifdef RFV_SCALE
+	unsigned int scale = 0;
+#endif
+	struct image_packet_t *img_pkt = NULL;
+
+	/* The image packet data struct is only used during first pass
+	 * relocation in the event that a trampoline is needed.  2nd pass
+	 * relocation doesn't guarantee that data is coming from an
+	 * image_packet_t structure. See cload.c, dload_data for how img_data is
+	 * set. If that changes this needs to be updated!!! */
+	if (second_pass == false)
+		img_pkt = (struct image_packet_t *)((u8 *) data -
+						    sizeof(struct
+							   image_packet_t));
+
+	rx = HASH_FUNC(rp->TYPE);
+	while (rop_map1[rx] != rp->TYPE) {
+		rx = HASH_L(rop_map2[rx]);
+		if (rx < 0) {
+#if TMS32060
+			switch (rp->TYPE) {
+			case R_C60ALIGN:
+			case R_C60NOCMP:
+			case R_C60FPHEAD:
+				/* Ignore these reloc types and return */
+				break;
+			default:
+				/* Unknown reloc type, print error and return */
+				dload_error(dlthis, "Bad coff operator 0x%x",
+					    rp->TYPE);
+			}
+#else
+			dload_error(dlthis, "Bad coff operator 0x%x", rp->TYPE);
+#endif
+			return;
+		}
+	}
+	rx = HASH_I(rop_map2[rx]);
+	if ((rx < (sizeof(rop_action) / sizeof(u16)))
+	    && (rx < (sizeof(rop_info) / sizeof(u16))) && (rx > 0)) {
+		reloc_action = rop_action[rx];
+		reloc_info = rop_info[rx];
+	} else {
+		dload_error(dlthis, "Buffer Overflow - Array Index Out "
+			    "of Bounds");
+	}
+
+	/* Compute the relocation amount for the referenced symbol, if any */
+	reloc_amt = rp->UVAL;
+	if (RFV_SYM(reloc_info)) {	/* relocation uses a symbol reference */
+		/* If this is first pass, use the module local symbol table,
+		 * else use the trampoline symbol table. */
+		if (second_pass == false) {
+			if ((u32) rp->SYMNDX < dlthis->dfile_hdr.df_no_syms) {
+				/* real symbol reference */
+				svp = &dlthis->local_symtab[rp->SYMNDX];
+				reloc_amt = (RFV_SYM(reloc_info) == ROP_SYMD) ?
+				    svp->delta : svp->value;
+			}
+			/* reloc references current section */
+			else if (rp->SYMNDX == -1) {
+				reloc_amt = (RFV_SYM(reloc_info) == ROP_SYMD) ?
+				    dlthis->delta_runaddr :
+				    dlthis->image_secn->run_addr;
+			}
+		}
+	}
+	/* relocation uses a symbol reference */
+	/* Handle stack adjustment */
+	val = 0;
+	top = RFV_STK(reloc_info);
+	if (top) {
+		top += dlthis->relstkidx - RSTK_UOP;
+		if (top >= STATIC_EXPR_STK_SIZE) {
+			dload_error(dlthis,
+				    "Expression stack overflow in %s at offset "
+				    FMT_UI32, dlthis->image_secn->name,
+				    rp->vaddr + dlthis->image_offset);
+			return;
+		}
+		val = dlthis->relstk[dlthis->relstkidx];
+		dlthis->relstkidx = top;
+		stackp = &dlthis->relstk[top];
+	}
+	/* Derive field position and size, if we need them */
+	if (reloc_info & ROP_RW) {	/* read or write action in our future */
+		fieldsz = RFV_WIDTH(reloc_action);
+		if (fieldsz) {	/* field info from table */
+			offset = RFV_POSN(reloc_action);
+			if (TARGET_BIG_ENDIAN)
+				/* make sure vaddr is the lowest target
+				 * address containing bits */
+				rp->vaddr += RFV_BIGOFF(reloc_info);
+		} else {	/* field info from relocation op */
+			fieldsz = rp->FIELDSZ;
+			offset = rp->OFFSET;
+			if (TARGET_BIG_ENDIAN)
+				/* make sure vaddr is the lowest target
+				   address containing bits */
+				rp->vaddr += (rp->WORDSZ - offset - fieldsz)
+				    >> LOG_TARGET_AU_BITS;
+		}
+		data = (tgt_au_t *) ((char *)data + TADDR_TO_HOST(rp->vaddr));
+		/* compute lowest host location of referenced data */
+#if BITS_PER_AU > TARGET_AU_BITS
+		/* conversion from target address to host address may lose
+		   address bits; add loss to offset */
+		if (TARGET_BIG_ENDIAN) {
+			offset += -((rp->vaddr << LOG_TARGET_AU_BITS) +
+				    offset + fieldsz) &
+			    (BITS_PER_AU - TARGET_AU_BITS);
+		} else {
+			offset += (rp->vaddr << LOG_TARGET_AU_BITS) &
+			    (BITS_PER_AU - 1);
+		}
+#endif
+#ifdef RFV_SCALE
+		scale = RFV_SCALE(reloc_info);
+#endif
+	}
+	/* read the object value from the current image, if so ordered */
+	if (reloc_info & ROP_R) {
+		/* relocation reads current image value */
+		val = dload_unpack(dlthis, data, fieldsz, offset,
+				   RFV_SIGN(reloc_info));
+		/* Save off the original value in case the relo overflows and
+		 * we can trampoline it. */
+		orig_val = val;
+
+#ifdef RFV_SCALE
+		val <<= scale;
+#endif
+	}
+	/* perform the necessary arithmetic */
+	switch (RFV_ACTION(reloc_action)) {	/* relocation actions */
+	case RACT_VAL:
+		break;
+	case RACT_ASGN:
+		val = reloc_amt;
+		break;
+	case RACT_ADD:
+		val += reloc_amt;
+		break;
+	case RACT_PCR:
+		/*-----------------------------------------------------------
+		 * Handle special cases of jumping from absolute sections
+		 * (special reloc type) or to absolute destination
+		 * (symndx == -1).  In either case, set the appropriate
+		 * relocation amount to 0.
+		 *----------------------------------------------------------- */
+		if (rp->SYMNDX == -1)
+			reloc_amt = 0;
+		val += reloc_amt - dlthis->delta_runaddr;
+		break;
+	case RACT_ADDISP:
+		val += rp->R_DISP + reloc_amt;
+		break;
+	case RACT_ASGPC:
+		val = dlthis->image_secn->run_addr + reloc_amt;
+		break;
+	case RACT_PLUS:
+		if (stackp != NULL)
+			val += *stackp;
+		break;
+	case RACT_SUB:
+		if (stackp != NULL)
+			val = *stackp - val;
+		break;
+	case RACT_NEG:
+		val = -val;
+		break;
+	case RACT_MPY:
+		if (stackp != NULL)
+			val *= *stackp;
+		break;
+	case RACT_DIV:
+		if (stackp != NULL)
+			val = *stackp / val;
+		break;
+	case RACT_MOD:
+		if (stackp != NULL)
+			val = *stackp % val;
+		break;
+	case RACT_SR:
+		if (val >= sizeof(rvalue) * BITS_PER_AU)
+			val = 0;
+		else if (stackp != NULL)
+			val = (urvalue) *stackp >> val;
+		break;
+	case RACT_ASR:
+		if (val >= sizeof(rvalue) * BITS_PER_AU)
+			val = sizeof(rvalue) * BITS_PER_AU - 1;
+		else if (stackp != NULL)
+			val = *stackp >> val;
+		break;
+	case RACT_SL:
+		if (val >= sizeof(rvalue) * BITS_PER_AU)
+			val = 0;
+		else if (stackp != NULL)
+			val = *stackp << val;
+		break;
+	case RACT_AND:
+		if (stackp != NULL)
+			val &= *stackp;
+		break;
+	case RACT_OR:
+		if (stackp != NULL)
+			val |= *stackp;
+		break;
+	case RACT_XOR:
+		if (stackp != NULL)
+			val ^= *stackp;
+		break;
+	case RACT_NOT:
+		val = ~val;
+		break;
+#if TMS32060
+	case RACT_C6SECT:
+		/* actually needed address of secn containing symbol */
+		if (svp != NULL) {
+			if (rp->SYMNDX >= 0)
+				if (svp->secnn > 0)
+					reloc_amt = dlthis->ldr_sections
+					    [svp->secnn - 1].run_addr;
+		}
+		/* !!! FALL THRU !!! */
+	case RACT_C6BASE:
+		if (dlthis->bss_run_base == 0) {
+			struct dynload_symbol *symp;
+			symp = dlthis->mysym->find_matching_symbol
+			    (dlthis->mysym, bsssymbol);
+			/* lookup value of global BSS base */
+			if (symp)
+				dlthis->bss_run_base = symp->value;
+			else
+				dload_error(dlthis,
+					    "Global BSS base referenced in %s "
+					    "offset" FMT_UI32 " but not "
+					    "defined",
+					    dlthis->image_secn->name,
+					    rp->vaddr + dlthis->image_offset);
+		}
+		reloc_amt -= dlthis->bss_run_base;
+		/* !!! FALL THRU !!! */
+	case RACT_C6DSPL:
+		/* scale factor determined by 3 LSBs of field */
+		scale = c60_scale[val & SCALE_MASK];
+		offset += SCALE_BITS;
+		fieldsz -= SCALE_BITS;
+		val >>= SCALE_BITS;	/* ignore the scale field hereafter */
+		val <<= scale;
+		val += reloc_amt;	/* do the usual relocation */
+		if (((1 << scale) - 1) & val)
+			dload_error(dlthis,
+				    "Unaligned reference in %s offset "
+				    FMT_UI32, dlthis->image_secn->name,
+				    rp->vaddr + dlthis->image_offset);
+		break;
+#endif
+	}			/* relocation actions */
+	/* * Put back result as required */
+	if (reloc_info & ROP_W) {	/* relocation writes image value */
+#ifdef RFV_SCALE
+		val >>= scale;
+#endif
+		if (dload_repack(dlthis, val, data, fieldsz, offset,
+				 RFV_SIGN(reloc_info))) {
+			/* Check to see if this relo can be trampolined,
+			 * but only in first phase relocation.  2nd phase
+			 * relocation cannot trampoline. */
+			if ((second_pass == false) &&
+			    (dload_tramp_avail(dlthis, rp) == true)) {
+
+				/* Before generating the trampoline, restore
+				 * the value to its original so the 2nd pass
+				 *  relo will work. */
+				dload_repack(dlthis, orig_val, data, fieldsz,
+					     offset, RFV_SIGN(reloc_info));
+				if (!dload_tramp_generate(dlthis,
+							(dlthis->image_secn -
+							 dlthis->ldr_sections),
+							 dlthis->image_offset,
+							 img_pkt, rp)) {
+					dload_error(dlthis,
+						    "Failed to "
+						    "generate trampoline for "
+						    "bit overflow");
+					dload_error(dlthis,
+						    "Relocation val " FMT_UI32
+						    " overflows %d bits in %s "
+						    "offset " FMT_UI32, val,
+						    fieldsz,
+						    dlthis->image_secn->name,
+						    dlthis->image_offset +
+						    rp->vaddr);
+				} else
+					*tramps_generated = true;
+			} else {
+				dload_error(dlthis, "Relocation value "
+					    FMT_UI32 " overflows %d bits in %s"
+					    " offset " FMT_UI32, val, fieldsz,
+					    dlthis->image_secn->name,
+					    dlthis->image_offset + rp->vaddr);
+			}
+		}
+	} else if (top)
+		*stackp = val;
+}				/* reloc_value */
diff --git a/drivers/staging/tidspbridge/dynload/reloc_table.h b/drivers/staging/tidspbridge/dynload/reloc_table.h
new file mode 100644
index 00000000000..6aab03d4668
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/reloc_table.h
@@ -0,0 +1,102 @@
+/*
+ * reloc_table.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _RELOC_TABLE_H_
+#define _RELOC_TABLE_H_
+/*
+ * Table of relocation operator properties
+ */
+#include <linux/types.h>
+
+/* How does this relocation operation access the program image? */
+#define ROP_N	0		/* does not access image */
+#define ROP_R	1		/* read from image */
+#define ROP_W	2		/* write to image */
+#define ROP_RW	3		/* read from and write to image */
+
+/* For program image access, what are the overflow rules for the bit field? */
+/* Beware! Procedure repack depends on this encoding */
+#define ROP_ANY	0		/* no overflow ever, just truncate the value */
+#define ROP_SGN	1		/* signed field */
+#define ROP_UNS	2		/* unsigned field */
+#define ROP_MAX 3	/* allow maximum range of either signed or unsigned */
+
+/* How does the relocation operation use the symbol reference */
+#define ROP_IGN	0		/* no symbol is referenced */
+#define ROP_LIT 0		/* use rp->UVAL literal field */
+#define ROP_SYM	1		/* symbol value is used in relocation */
+#define ROP_SYMD 2		/* delta value vs last link is used */
+
+/* How does the reloc op use the stack? */
+#define RSTK_N 0		/* Does not use */
+#define RSTK_POP 1		/* Does a POP */
+#define RSTK_UOP 2		/* Unary op, stack position unaffected */
+#define RSTK_PSH 3		/* Does a push */
+
+/*
+ * Computational actions performed by the dynamic loader
+ */
+enum dload_actions {
+	/* don't alter the current val (from stack or mem fetch) */
+	RACT_VAL,
+	/* set value to reference amount (from symbol reference) */
+	RACT_ASGN,
+	RACT_ADD,		/* add reference to value */
+	RACT_PCR,		/* add reference minus PC delta to value */
+	RACT_ADDISP,		/* add reference plus R_DISP */
+	RACT_ASGPC,		/* set value to section addr plus reference */
+
+	RACT_PLUS,		/* stack + */
+	RACT_SUB,		/* stack - */
+	RACT_NEG,		/* stack unary - */
+
+	RACT_MPY,		/* stack * */
+	RACT_DIV,		/* stack / */
+	RACT_MOD,		/* stack % */
+
+	RACT_SR,		/* stack unsigned >> */
+	RACT_ASR,		/* stack signed >> */
+	RACT_SL,		/* stack << */
+	RACT_AND,		/* stack & */
+	RACT_OR,		/* stack | */
+	RACT_XOR,		/* stack ^ */
+	RACT_NOT,		/* stack ~ */
+	RACT_C6SECT,		/* for C60 R_SECT op */
+	RACT_C6BASE,		/* for C60 R_BASE op */
+	RACT_C6DSPL,		/* for C60 scaled 15-bit displacement */
+	RACT_PCR23T		/* for ARM Thumb long branch */
+};
+
+/*
+ * macros used to extract values
+ */
+#define RFV_POSN(aaa) ((aaa) & 0xF)
+#define RFV_WIDTH(aaa) (((aaa) >> 4) & 0x3F)
+#define RFV_ACTION(aaa) ((aaa) >> 10)
+
+#define RFV_SIGN(iii) (((iii) >> 2) & 0x3)
+#define RFV_SYM(iii) (((iii) >> 4) & 0x3)
+#define RFV_STK(iii) (((iii) >> 6) & 0x3)
+#define RFV_ACCS(iii) ((iii) & 0x3)
+
+#if (TMS32060)
+#define RFV_SCALE(iii) ((iii) >> 11)
+#define RFV_BIGOFF(iii) (((iii) >> 8) & 0x7)
+#else
+#define RFV_BIGOFF(iii) ((iii) >> 8)
+#endif
+
+#endif /* _RELOC_TABLE_H_ */
diff --git a/drivers/staging/tidspbridge/dynload/reloc_table_c6000.c b/drivers/staging/tidspbridge/dynload/reloc_table_c6000.c
new file mode 100644
index 00000000000..a28bc044249
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/reloc_table_c6000.c
@@ -0,0 +1,257 @@
+/*
+ * reloc_table_c6000.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/* Tables generated for c6000 */
+
+#define HASH_FUNC(zz) (((((zz) + 1) * 1845UL) >> 11) & 63)
+#define HASH_L(zz) ((zz) >> 8)
+#define HASH_I(zz) ((zz) & 0xFF)
+
+static const u16 rop_map1[] = {
+	0,
+	1,
+	2,
+	20,
+	4,
+	5,
+	6,
+	15,
+	80,
+	81,
+	82,
+	83,
+	84,
+	85,
+	86,
+	87,
+	17,
+	18,
+	19,
+	21,
+	16,
+	16394,
+	16404,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	32,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	40,
+	112,
+	113,
+	65535,
+	16384,
+	16385,
+	16386,
+	16387,
+	16388,
+	16389,
+	16390,
+	16391,
+	16392,
+	16393,
+	16395,
+	16396,
+	16397,
+	16398,
+	16399,
+	16400,
+	16401,
+	16402,
+	16403,
+	16405,
+	16406,
+	65535,
+	65535,
+	65535
+};
+
+static const s16 rop_map2[] = {
+	-256,
+	-255,
+	-254,
+	-245,
+	-253,
+	-252,
+	-251,
+	-250,
+	-241,
+	-240,
+	-239,
+	-238,
+	-237,
+	-236,
+	1813,
+	5142,
+	-248,
+	-247,
+	778,
+	-244,
+	-249,
+	-221,
+	-211,
+	-1,
+	-1,
+	-1,
+	-1,
+	-1,
+	-1,
+	-243,
+	-1,
+	-1,
+	-1,
+	-1,
+	-1,
+	-1,
+	-242,
+	-233,
+	-232,
+	-1,
+	-231,
+	-230,
+	-229,
+	-228,
+	-227,
+	-226,
+	-225,
+	-224,
+	-223,
+	5410,
+	-220,
+	-219,
+	-218,
+	-217,
+	-216,
+	-215,
+	-214,
+	-213,
+	5676,
+	-210,
+	-209,
+	-1,
+	-1,
+	-1
+};
+
+static const u16 rop_action[] = {
+	2560,
+	2304,
+	2304,
+	2432,
+	2432,
+	2560,
+	2176,
+	2304,
+	2560,
+	3200,
+	3328,
+	3584,
+	3456,
+	2304,
+	4208,
+	20788,
+	21812,
+	3415,
+	3245,
+	2311,
+	4359,
+	19764,
+	2311,
+	3191,
+	3280,
+	6656,
+	7680,
+	8704,
+	9728,
+	10752,
+	11776,
+	12800,
+	13824,
+	14848,
+	15872,
+	16896,
+	17920,
+	18944,
+	0,
+	0,
+	0,
+	0,
+	1536,
+	1536,
+	1536,
+	5632,
+	512,
+	0
+};
+
+static const u16 rop_info[] = {
+	0,
+	35,
+	35,
+	35,
+	35,
+	35,
+	35,
+	35,
+	35,
+	39,
+	39,
+	39,
+	39,
+	35,
+	34,
+	283,
+	299,
+	4135,
+	4391,
+	291,
+	33059,
+	283,
+	295,
+	4647,
+	4135,
+	64,
+	64,
+	128,
+	64,
+	64,
+	64,
+	64,
+	64,
+	64,
+	64,
+	64,
+	64,
+	128,
+	201,
+	197,
+	74,
+	70,
+	208,
+	196,
+	200,
+	192,
+	192,
+	66
+};
diff --git a/drivers/staging/tidspbridge/dynload/tramp.c b/drivers/staging/tidspbridge/dynload/tramp.c
new file mode 100644
index 00000000000..60d22ea4705
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/tramp.c
@@ -0,0 +1,1143 @@
+/*
+ * tramp.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "header.h"
+
+#if TMS32060
+#include "tramp_table_c6000.c"
+#endif
+
+#define MAX_RELOS_PER_PASS	4
+
+/*
+ * Function:	priv_tramp_sect_tgt_alloc
+ * Description: Allocate target memory for the trampoline section.  The
+ *	  target mem size is easily obtained as the next available address.
+ */
+static int priv_tramp_sect_tgt_alloc(struct dload_state *dlthis)
+{
+	int ret_val = 0;
+	struct ldr_section_info *sect_info;
+
+	/*  Populate the trampoline loader section and allocate it on the
+	 * target.  The section name is ALWAYS the first string in the final
+	 * string table for trampolines.  The trampoline section is always
+	 * 1 beyond the total number of allocated sections. */
+	sect_info = &dlthis->ldr_sections[dlthis->allocated_secn_count];
+
+	sect_info->name = dlthis->tramp.final_string_table;
+	sect_info->size = dlthis->tramp.tramp_sect_next_addr;
+	sect_info->context = 0;
+	sect_info->type =
+	    (4 << 8) | DLOAD_TEXT | DS_ALLOCATE_MASK | DS_DOWNLOAD_MASK;
+	sect_info->page = 0;
+	sect_info->run_addr = 0;
+	sect_info->load_addr = 0;
+	ret_val = dlthis->myalloc->dload_allocate(dlthis->myalloc,
+						  sect_info,
+						  ds_alignment
+						  (sect_info->type));
+
+	if (ret_val == 0)
+		dload_error(dlthis, "Failed to allocate target memory for"
+			    " trampoline");
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_h2a
+ * Description: Helper function to convert a hex value to its ASCII
+ *	  representation.  Used for trampoline symbol name generation.
+ */
+static u8 priv_h2a(u8 value)
+{
+	if (value > 0xF)
+		return 0xFF;
+
+	if (value <= 9)
+		value += 0x30;
+	else
+		value += 0x37;
+
+	return value;
+}
+
+/*
+ * Function:	priv_tramp_sym_gen_name
+ * Description: Generate a trampoline symbol name (ASCII) using the value
+ *	  of the symbol.  This places the new name into the user buffer.
+ *	  The name is fixed in length and of the form: __$dbTR__xxxxxxxx
+ *	  (where "xxxxxxxx" is the hex value.
+ */
+static void priv_tramp_sym_gen_name(u32 value, char *dst)
+{
+	u32 i;
+	char *prefix = TRAMP_SYM_PREFIX;
+	char *dst_local = dst;
+	u8 tmp;
+
+	/*  Clear out the destination, including the ending NULL */
+	for (i = 0; i < (TRAMP_SYM_PREFIX_LEN + TRAMP_SYM_HEX_ASCII_LEN); i++)
+		*(dst_local + i) = 0;
+
+	/*  Copy the prefix to start */
+	for (i = 0; i < strlen(TRAMP_SYM_PREFIX); i++) {
+		*dst_local = *(prefix + i);
+		dst_local++;
+	}
+
+	/*  Now convert the value passed in to a string equiv of the hex */
+	for (i = 0; i < sizeof(value); i++) {
+#ifndef _BIG_ENDIAN
+		tmp = *(((u8 *) &value) + (sizeof(value) - 1) - i);
+		*dst_local = priv_h2a((tmp & 0xF0) >> 4);
+		dst_local++;
+		*dst_local = priv_h2a(tmp & 0x0F);
+		dst_local++;
+#else
+		tmp = *(((u8 *) &value) + i);
+		*dst_local = priv_h2a((tmp & 0xF0) >> 4);
+		dst_local++;
+		*dst_local = priv_h2a(tmp & 0x0F);
+		dst_local++;
+#endif
+	}
+
+	/*  NULL terminate */
+	*dst_local = 0;
+}
+
+/*
+ * Function:	priv_tramp_string_create
+ * Description: Create a new string specific to the trampoline loading and add
+ *	  it to the trampoline string list.  This list contains the
+ *	  trampoline section name and trampoline point symbols.
+ */
+static struct tramp_string *priv_tramp_string_create(struct dload_state *dlthis,
+						     u32 str_len, char *str)
+{
+	struct tramp_string *new_string = NULL;
+	u32 i;
+
+	/*  Create a new string object with the specified size. */
+	new_string =
+	    (struct tramp_string *)dlthis->mysym->dload_allocate(dlthis->mysym,
+								 (sizeof
+								  (struct
+								   tramp_string)
+								  + str_len +
+								  1));
+	if (new_string != NULL) {
+		/*  Clear the string first.  This ensures the ending NULL is
+		 * present and the optimizer won't touch it. */
+		for (i = 0; i < (sizeof(struct tramp_string) + str_len + 1);
+		     i++)
+			*((u8 *) new_string + i) = 0;
+
+		/*  Add this string to our virtual table by assigning it the
+		 * next index and pushing it to the tail of the list. */
+		new_string->index = dlthis->tramp.tramp_string_next_index;
+		dlthis->tramp.tramp_string_next_index++;
+		dlthis->tramp.tramp_string_size += str_len + 1;
+
+		new_string->next = NULL;
+		if (dlthis->tramp.string_head == NULL)
+			dlthis->tramp.string_head = new_string;
+		else
+			dlthis->tramp.string_tail->next = new_string;
+
+		dlthis->tramp.string_tail = new_string;
+
+		/*  Copy the string over to the new object */
+		for (i = 0; i < str_len; i++)
+			new_string->str[i] = str[i];
+	}
+
+	return new_string;
+}
+
+/*
+ * Function:	priv_tramp_string_find
+ * Description: Walk the trampoline string list and find a match for the
+ *	  provided string.  If not match is found, NULL is returned.
+ */
+static struct tramp_string *priv_tramp_string_find(struct dload_state *dlthis,
+						   char *str)
+{
+	struct tramp_string *cur_str = NULL;
+	struct tramp_string *ret_val = NULL;
+	u32 i;
+	u32 str_len = strlen(str);
+
+	for (cur_str = dlthis->tramp.string_head;
+	     (ret_val == NULL) && (cur_str != NULL); cur_str = cur_str->next) {
+		/*  If the string lengths aren't equal, don't bother
+		 * comparing */
+		if (str_len != strlen(cur_str->str))
+			continue;
+
+		/*  Walk the strings until one of them ends */
+		for (i = 0; i < str_len; i++) {
+			/*  If they don't match in the current position then
+			 * break out now, no sense in continuing to look at
+			 * this string. */
+			if (str[i] != cur_str->str[i])
+				break;
+		}
+
+		if (i == str_len)
+			ret_val = cur_str;
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_string_tbl_finalize
+ * Description: Flatten the trampoline string list into a table of NULL
+ *	  terminated strings.  This is the same format of string table
+ *	  as used by the COFF/DOFF file.
+ */
+static int priv_string_tbl_finalize(struct dload_state *dlthis)
+{
+	int ret_val = 0;
+	struct tramp_string *cur_string;
+	char *cur_loc;
+	char *tmp;
+
+	/*  Allocate enough space for all strings that have been created.  The
+	 * table is simply all strings concatenated together will NULL
+	 * endings. */
+	dlthis->tramp.final_string_table =
+	    (char *)dlthis->mysym->dload_allocate(dlthis->mysym,
+						  dlthis->tramp.
+						  tramp_string_size);
+	if (dlthis->tramp.final_string_table != NULL) {
+		/*  We got our buffer, walk the list and release the nodes as*
+		 * we go */
+		cur_loc = dlthis->tramp.final_string_table;
+		cur_string = dlthis->tramp.string_head;
+		while (cur_string != NULL) {
+			/*  Move the head/tail pointers */
+			dlthis->tramp.string_head = cur_string->next;
+			if (dlthis->tramp.string_tail == cur_string)
+				dlthis->tramp.string_tail = NULL;
+
+			/*  Copy the string contents */
+			for (tmp = cur_string->str;
+			     *tmp != '\0'; tmp++, cur_loc++)
+				*cur_loc = *tmp;
+
+			/*  Pick up the NULL termination since it was missed by
+			 * breaking using it to end the above loop. */
+			*cur_loc = '\0';
+			cur_loc++;
+
+			/*  Free the string node, we don't need it any more. */
+			dlthis->mysym->dload_deallocate(dlthis->mysym,
+							cur_string);
+
+			/*  Move our pointer to the next one */
+			cur_string = dlthis->tramp.string_head;
+		}
+
+		/*  Update our return value to success */
+		ret_val = 1;
+	} else
+		dload_error(dlthis, "Failed to allocate trampoline "
+			    "string table");
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_tramp_sect_alloc
+ * Description: Virtually allocate space from the trampoline section.  This
+ *	  function returns the next offset within the trampoline section
+ *	  that is available and moved the next available offset by the
+ *	  requested size.  NO TARGET ALLOCATION IS DONE AT THIS TIME.
+ */
+static u32 priv_tramp_sect_alloc(struct dload_state *dlthis, u32 tramp_size)
+{
+	u32 ret_val;
+
+	/*  If the next available address is 0, this is our first allocation.
+	 * Create a section name string to go into the string table . */
+	if (dlthis->tramp.tramp_sect_next_addr == 0) {
+		dload_syms_error(dlthis->mysym, "*** WARNING ***  created "
+				 "dynamic TRAMPOLINE section for module %s",
+				 dlthis->str_head);
+	}
+
+	/*  Reserve space for the new trampoline */
+	ret_val = dlthis->tramp.tramp_sect_next_addr;
+	dlthis->tramp.tramp_sect_next_addr += tramp_size;
+	return ret_val;
+}
+
+/*
+ * Function:	priv_tramp_sym_create
+ * Description: Allocate and create a new trampoline specific symbol and add
+ *	  it to the trampoline symbol list.  These symbols will include
+ *	  trampoline points as well as the external symbols they
+ *	  reference.
+ */
+static struct tramp_sym *priv_tramp_sym_create(struct dload_state *dlthis,
+					       u32 str_index,
+					       struct local_symbol *tmp_sym)
+{
+	struct tramp_sym *new_sym = NULL;
+	u32 i;
+
+	/*  Allocate new space for the symbol in the symbol table. */
+	new_sym =
+	    (struct tramp_sym *)dlthis->mysym->dload_allocate(dlthis->mysym,
+					      sizeof(struct tramp_sym));
+	if (new_sym != NULL) {
+		for (i = 0; i != sizeof(struct tramp_sym); i++)
+			*((char *)new_sym + i) = 0;
+
+		/*  Assign this symbol the next symbol index for easier
+		 * reference later during relocation. */
+		new_sym->index = dlthis->tramp.tramp_sym_next_index;
+		dlthis->tramp.tramp_sym_next_index++;
+
+		/*  Populate the symbol information.  At this point any
+		 * trampoline symbols will be the offset location, not the
+		 * final.  Copy over the symbol info to start, then be sure to
+		 * get the string index from the trampoline string table. */
+		new_sym->sym_info = *tmp_sym;
+		new_sym->str_index = str_index;
+
+		/*  Push the new symbol to the tail of the symbol table list */
+		new_sym->next = NULL;
+		if (dlthis->tramp.symbol_head == NULL)
+			dlthis->tramp.symbol_head = new_sym;
+		else
+			dlthis->tramp.symbol_tail->next = new_sym;
+
+		dlthis->tramp.symbol_tail = new_sym;
+	}
+
+	return new_sym;
+}
+
+/*
+ * Function:	priv_tramp_sym_get
+ * Description: Search for the symbol with the matching string index (from
+ *	  the trampoline string table) and return the trampoline
+ *	  symbol object, if found.  Otherwise return NULL.
+ */
+static struct tramp_sym *priv_tramp_sym_get(struct dload_state *dlthis,
+					    u32 string_index)
+{
+	struct tramp_sym *sym_found = NULL;
+
+	/*  Walk the symbol table list and search vs. the string index */
+	for (sym_found = dlthis->tramp.symbol_head;
+	     sym_found != NULL; sym_found = sym_found->next) {
+		if (sym_found->str_index == string_index)
+			break;
+	}
+
+	return sym_found;
+}
+
+/*
+ * Function:	priv_tramp_sym_find
+ * Description: Search for a trampoline symbol based on the string name of
+ *	  the symbol.  Return the symbol object, if found, otherwise
+ *	  return NULL.
+ */
+static struct tramp_sym *priv_tramp_sym_find(struct dload_state *dlthis,
+					     char *string)
+{
+	struct tramp_sym *sym_found = NULL;
+	struct tramp_string *str_found = NULL;
+
+	/*  First, search for the string, then search for the sym based on the
+	   string index. */
+	str_found = priv_tramp_string_find(dlthis, string);
+	if (str_found != NULL)
+		sym_found = priv_tramp_sym_get(dlthis, str_found->index);
+
+	return sym_found;
+}
+
+/*
+ * Function:	priv_tramp_sym_finalize
+ * Description: Allocate a flat symbol table for the trampoline section,
+ *	  put each trampoline symbol into the table, adjust the
+ *	  symbol value based on the section address on the target and
+ *	  free the trampoline symbol list nodes.
+ */
+static int priv_tramp_sym_finalize(struct dload_state *dlthis)
+{
+	int ret_val = 0;
+	struct tramp_sym *cur_sym;
+	struct ldr_section_info *tramp_sect =
+	    &dlthis->ldr_sections[dlthis->allocated_secn_count];
+	struct local_symbol *new_sym;
+
+	/*  Allocate a table to hold a flattened version of all symbols
+	 * created. */
+	dlthis->tramp.final_sym_table =
+	    (struct local_symbol *)dlthis->mysym->dload_allocate(dlthis->mysym,
+				 (sizeof(struct local_symbol) * dlthis->tramp.
+						  tramp_sym_next_index));
+	if (dlthis->tramp.final_sym_table != NULL) {
+		/*  Walk the list of all symbols, copy it over to the flattened
+		 * table. After it has been copied, the node can be freed as
+		 * it is no longer needed. */
+		new_sym = dlthis->tramp.final_sym_table;
+		cur_sym = dlthis->tramp.symbol_head;
+		while (cur_sym != NULL) {
+			/*  Pop it off the list */
+			dlthis->tramp.symbol_head = cur_sym->next;
+			if (cur_sym == dlthis->tramp.symbol_tail)
+				dlthis->tramp.symbol_tail = NULL;
+
+			/*  Copy the symbol contents into the flat table */
+			*new_sym = cur_sym->sym_info;
+
+			/*  Now finaize the symbol.  If it is in the tramp
+			 * section, we need to adjust for the section start.
+			 * If it is external then we don't need to adjust at
+			 * all.
+			 * NOTE: THIS CODE ASSUMES THAT THE TRAMPOLINE IS
+			 * REFERENCED LIKE A CALL TO AN EXTERNAL SO VALUE AND
+			 * DELTA ARE THE SAME.  SEE THE FUNCTION dload_symbols
+			 * WHERE DN_UNDEF IS HANDLED FOR MORE REFERENCE. */
+			if (new_sym->secnn < 0) {
+				new_sym->value += tramp_sect->load_addr;
+				new_sym->delta = new_sym->value;
+			}
+
+			/*  Let go of the symbol node */
+			dlthis->mysym->dload_deallocate(dlthis->mysym, cur_sym);
+
+			/*  Move to the next node */
+			cur_sym = dlthis->tramp.symbol_head;
+			new_sym++;
+		}
+
+		ret_val = 1;
+	} else
+		dload_error(dlthis, "Failed to alloc trampoline sym table");
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_tgt_img_gen
+ * Description: Allocate storage for and copy the target specific image data
+ *	and fix up its relocations for the new external symbol.  If
+ *	a trampoline image packet was successfully created it is added
+ *	to the trampoline list.
+ */
+static int priv_tgt_img_gen(struct dload_state *dlthis, u32 base,
+			    u32 gen_index, struct tramp_sym *new_ext_sym)
+{
+	struct tramp_img_pkt *new_img_pkt = NULL;
+	u32 i;
+	u32 pkt_size = tramp_img_pkt_size_get();
+	u8 *gen_tbl_entry;
+	u8 *pkt_data;
+	struct reloc_record_t *cur_relo;
+	int ret_val = 0;
+
+	/*  Allocate a new image packet and set it up. */
+	new_img_pkt =
+	    (struct tramp_img_pkt *)dlthis->mysym->dload_allocate(dlthis->mysym,
+								  pkt_size);
+	if (new_img_pkt != NULL) {
+		/*  Save the base, this is where it goes in the section */
+		new_img_pkt->base = base;
+
+		/*  Copy over the image data and relos from the target table */
+		pkt_data = (u8 *) &new_img_pkt->hdr;
+		gen_tbl_entry = (u8 *) &tramp_gen_info[gen_index];
+		for (i = 0; i < pkt_size; i++) {
+			*pkt_data = *gen_tbl_entry;
+			pkt_data++;
+			gen_tbl_entry++;
+		}
+
+		/*  Update the relocations to point to the external symbol */
+		cur_relo =
+		    (struct reloc_record_t *)((u8 *) &new_img_pkt->hdr +
+					      new_img_pkt->hdr.relo_offset);
+		for (i = 0; i < new_img_pkt->hdr.num_relos; i++)
+			cur_relo[i].SYMNDX = new_ext_sym->index;
+
+		/*  Add it to the trampoline list. */
+		new_img_pkt->next = dlthis->tramp.tramp_pkts;
+		dlthis->tramp.tramp_pkts = new_img_pkt;
+
+		ret_val = 1;
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_pkt_relo
+ * Description: Take the provided image data and the collection of relocations
+ *	  for it and perform the relocations.  Note that all relocations
+ *	  at this stage are considered SECOND PASS since the original
+ *	  image has already been processed in the first pass.  This means
+ *	  TRAMPOLINES ARE TREATED AS 2ND PASS even though this is really
+ *	  the first (and only) relocation that will be performed on them.
+ */
+static int priv_pkt_relo(struct dload_state *dlthis, tgt_au_t * data,
+			 struct reloc_record_t *rp[], u32 relo_count)
+{
+	int ret_val = 1;
+	u32 i;
+	bool tmp;
+
+	/*  Walk through all of the relos and process them.  This function is
+	 * the equivalent of relocate_packet() from cload.c, but specialized
+	 * for trampolines and 2nd phase relocations. */
+	for (i = 0; i < relo_count; i++)
+		dload_relocate(dlthis, data, rp[i], &tmp, true);
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_tramp_pkt_finalize
+ * Description: Walk the list of all trampoline packets and finalize them.
+ *	  Each trampoline image packet will be relocated now that the
+ *	  trampoline section has been allocated on the target.  Once
+ *	  all of the relocations are done the trampoline image data
+ *	  is written into target memory and the trampoline packet
+ *	  is freed: it is no longer needed after this point.
+ */
+static int priv_tramp_pkt_finalize(struct dload_state *dlthis)
+{
+	int ret_val = 1;
+	struct tramp_img_pkt *cur_pkt = NULL;
+	struct reloc_record_t *relos[MAX_RELOS_PER_PASS];
+	u32 relos_done;
+	u32 i;
+	struct reloc_record_t *cur_relo;
+	struct ldr_section_info *sect_info =
+	    &dlthis->ldr_sections[dlthis->allocated_secn_count];
+
+	/*  Walk the list of trampoline packets and relocate each packet.  This
+	 * function is the trampoline equivalent of dload_data() from
+	 * cload.c. */
+	cur_pkt = dlthis->tramp.tramp_pkts;
+	while ((ret_val != 0) && (cur_pkt != NULL)) {
+		/*  Remove the pkt from the list */
+		dlthis->tramp.tramp_pkts = cur_pkt->next;
+
+		/*  Setup section and image offset information for the relo */
+		dlthis->image_secn = sect_info;
+		dlthis->image_offset = cur_pkt->base;
+		dlthis->delta_runaddr = sect_info->run_addr;
+
+		/*  Walk through all relos for the packet */
+		relos_done = 0;
+		cur_relo = (struct reloc_record_t *)((u8 *) &cur_pkt->hdr +
+						     cur_pkt->hdr.relo_offset);
+		while (relos_done < cur_pkt->hdr.num_relos) {
+#ifdef ENABLE_TRAMP_DEBUG
+			dload_syms_error(dlthis->mysym,
+					 "===> Trampoline %x branches to %x",
+					 sect_info->run_addr +
+					 dlthis->image_offset,
+					 dlthis->
+					 tramp.final_sym_table[cur_relo->
+							       SYMNDX].value);
+#endif
+
+			for (i = 0;
+			     ((i < MAX_RELOS_PER_PASS) &&
+			      ((i + relos_done) < cur_pkt->hdr.num_relos)); i++)
+				relos[i] = cur_relo + i;
+
+			/*  Do the actual relo */
+			ret_val = priv_pkt_relo(dlthis,
+						(tgt_au_t *) &cur_pkt->payload,
+						relos, i);
+			if (ret_val == 0) {
+				dload_error(dlthis,
+					    "Relocation of trampoline pkt at %x"
+					    " failed", cur_pkt->base +
+					    sect_info->run_addr);
+				break;
+			}
+
+			relos_done += i;
+			cur_relo += i;
+		}
+
+		/*  Make sure we didn't hit a problem */
+		if (ret_val != 0) {
+			/*  Relos are done for the packet, write it to the
+			 * target */
+			ret_val = dlthis->myio->writemem(dlthis->myio,
+							 &cur_pkt->payload,
+							 sect_info->load_addr +
+							 cur_pkt->base,
+							 sect_info,
+							 BYTE_TO_HOST
+							 (cur_pkt->hdr.
+							  tramp_code_size));
+			if (ret_val == 0) {
+				dload_error(dlthis,
+					    "Write to " FMT_UI32 " failed",
+					    sect_info->load_addr +
+					    cur_pkt->base);
+			}
+
+			/*  Done with the pkt, let it go */
+			dlthis->mysym->dload_deallocate(dlthis->mysym, cur_pkt);
+
+			/*  Get the next packet to process */
+			cur_pkt = dlthis->tramp.tramp_pkts;
+		}
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_dup_pkt_finalize
+ * Description: Walk the list of duplicate image packets and finalize them.
+ *	  Each duplicate packet will be relocated again for the
+ *	  relocations that previously failed and have been adjusted
+ *	  to point at a trampoline.  Once all relocations for a packet
+ *	  have been done, write the packet into target memory.  The
+ *	  duplicate packet and its relocation chain are all freed
+ *	  after use here as they are no longer needed after this.
+ */
+static int priv_dup_pkt_finalize(struct dload_state *dlthis)
+{
+	int ret_val = 1;
+	struct tramp_img_dup_pkt *cur_pkt;
+	struct tramp_img_dup_relo *cur_relo;
+	struct reloc_record_t *relos[MAX_RELOS_PER_PASS];
+	struct doff_scnhdr_t *sect_hdr = NULL;
+	s32 i;
+
+	/* Similar to the trampoline pkt finalize, this function walks each dup
+	 * pkt that was generated and performs all relocations that were
+	 * deferred to a 2nd pass.  This is the equivalent of dload_data() from
+	 * cload.c, but does not need the additional reorder and checksum
+	 * processing as it has already been done. */
+	cur_pkt = dlthis->tramp.dup_pkts;
+	while ((ret_val != 0) && (cur_pkt != NULL)) {
+		/*  Remove the node from the list, we'll be freeing it
+		 * shortly */
+		dlthis->tramp.dup_pkts = cur_pkt->next;
+
+		/*  Setup the section and image offset for relocation */
+		dlthis->image_secn = &dlthis->ldr_sections[cur_pkt->secnn];
+		dlthis->image_offset = cur_pkt->offset;
+
+		/*  In order to get the delta run address, we need to reference
+		 * the original section header.  It's a bit ugly, but needed
+		 * for relo. */
+		i = (s32) (dlthis->image_secn - dlthis->ldr_sections);
+		sect_hdr = dlthis->sect_hdrs + i;
+		dlthis->delta_runaddr = sect_hdr->ds_paddr;
+
+		/*  Walk all relos in the chain and process each. */
+		cur_relo = cur_pkt->relo_chain;
+		while (cur_relo != NULL) {
+			/*  Process them a chunk at a time to be efficient */
+			for (i = 0; (i < MAX_RELOS_PER_PASS)
+			     && (cur_relo != NULL);
+			     i++, cur_relo = cur_relo->next) {
+				relos[i] = &cur_relo->relo;
+				cur_pkt->relo_chain = cur_relo->next;
+			}
+
+			/*  Do the actual relo */
+			ret_val = priv_pkt_relo(dlthis,
+						cur_pkt->img_pkt.img_data,
+						relos, i);
+			if (ret_val == 0) {
+				dload_error(dlthis,
+					    "Relocation of dup pkt at %x"
+					    " failed", cur_pkt->offset +
+					    dlthis->image_secn->run_addr);
+				break;
+			}
+
+			/*  Release all of these relos, we're done with them */
+			while (i > 0) {
+				dlthis->mysym->dload_deallocate(dlthis->mysym,
+						GET_CONTAINER
+						(relos[i - 1],
+						 struct tramp_img_dup_relo,
+						 relo));
+				i--;
+			}
+
+			/*  DO NOT ADVANCE cur_relo, IT IS ALREADY READY TO
+			 * GO! */
+		}
+
+		/* Done with all relos.  Make sure we didn't have a problem and
+		 * write it out to the target */
+		if (ret_val != 0) {
+			ret_val = dlthis->myio->writemem(dlthis->myio,
+							 cur_pkt->img_pkt.
+							 img_data,
+							 dlthis->image_secn->
+							 load_addr +
+							 cur_pkt->offset,
+							 dlthis->image_secn,
+							 BYTE_TO_HOST
+							 (cur_pkt->img_pkt.
+							  packet_size));
+			if (ret_val == 0) {
+				dload_error(dlthis,
+					    "Write to " FMT_UI32 " failed",
+					    dlthis->image_secn->load_addr +
+					    cur_pkt->offset);
+			}
+
+			dlthis->mysym->dload_deallocate(dlthis->mysym, cur_pkt);
+
+			/*  Advance to the next packet */
+			cur_pkt = dlthis->tramp.dup_pkts;
+		}
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	priv_dup_find
+ * Description: Walk the list of existing duplicate packets and find a
+ *	  match based on the section number and image offset.  Return
+ *	  the duplicate packet if found, otherwise NULL.
+ */
+static struct tramp_img_dup_pkt *priv_dup_find(struct dload_state *dlthis,
+					       s16 secnn, u32 image_offset)
+{
+	struct tramp_img_dup_pkt *cur_pkt = NULL;
+
+	for (cur_pkt = dlthis->tramp.dup_pkts;
+	     cur_pkt != NULL; cur_pkt = cur_pkt->next) {
+		if ((cur_pkt->secnn == secnn) &&
+		    (cur_pkt->offset == image_offset)) {
+			/*  Found a match, break out */
+			break;
+		}
+	}
+
+	return cur_pkt;
+}
+
+/*
+ * Function:	priv_img_pkt_dup
+ * Description: Duplicate the original image packet.  If this is the first
+ *	  time this image packet has been seen (based on section number
+ *	  and image offset), create a new duplicate packet and add it
+ *	  to the dup packet list.  If not, just get the existing one and
+ *	  update it with the current packet contents (since relocation
+ *	  on the packet is still ongoing in first pass.)  Create a
+ *	  duplicate of the provided relocation, but update it to point
+ *	  to the new trampoline symbol.  Add the new relocation dup to
+ *	  the dup packet's relo chain for 2nd pass relocation later.
+ */
+static int priv_img_pkt_dup(struct dload_state *dlthis,
+			    s16 secnn, u32 image_offset,
+			    struct image_packet_t *ipacket,
+			    struct reloc_record_t *rp,
+			    struct tramp_sym *new_tramp_sym)
+{
+	struct tramp_img_dup_pkt *dup_pkt = NULL;
+	u32 new_dup_size;
+	s32 i;
+	int ret_val = 0;
+	struct tramp_img_dup_relo *dup_relo = NULL;
+
+	/*  Determinne if this image packet is already being tracked in the
+	   dup list for other trampolines. */
+	dup_pkt = priv_dup_find(dlthis, secnn, image_offset);
+
+	if (dup_pkt == NULL) {
+		/*  This image packet does not exist in our tracking, so create
+		 * a new one and add it to the head of the list. */
+		new_dup_size = sizeof(struct tramp_img_dup_pkt) +
+		    ipacket->packet_size;
+
+		dup_pkt = (struct tramp_img_dup_pkt *)
+		    dlthis->mysym->dload_allocate(dlthis->mysym, new_dup_size);
+		if (dup_pkt != NULL) {
+			/*  Save off the section and offset information */
+			dup_pkt->secnn = secnn;
+			dup_pkt->offset = image_offset;
+			dup_pkt->relo_chain = NULL;
+
+			/*  Copy the original packet content */
+			dup_pkt->img_pkt = *ipacket;
+			dup_pkt->img_pkt.img_data = (u8 *) (dup_pkt + 1);
+			for (i = 0; i < ipacket->packet_size; i++)
+				*(dup_pkt->img_pkt.img_data + i) =
+				    *(ipacket->img_data + i);
+
+			/*  Add the packet to the dup list */
+			dup_pkt->next = dlthis->tramp.dup_pkts;
+			dlthis->tramp.dup_pkts = dup_pkt;
+		} else
+			dload_error(dlthis, "Failed to create dup packet!");
+	} else {
+		/*  The image packet contents could have changed since
+		 * trampoline detection happens during relocation of the image
+		 * packets.  So, we need to update the image packet contents
+		 * before adding relo information. */
+		for (i = 0; i < dup_pkt->img_pkt.packet_size; i++)
+			*(dup_pkt->img_pkt.img_data + i) =
+			    *(ipacket->img_data + i);
+	}
+
+	/*  Since the previous code may have allocated a new dup packet for us,
+	   double check that we actually have one. */
+	if (dup_pkt != NULL) {
+		/*  Allocate a new node for the relo chain.  Each image packet
+		 * can potentially have multiple relocations that cause a
+		 * trampoline to be generated.  So, we keep them in a chain,
+		 * order is not important. */
+		dup_relo = dlthis->mysym->dload_allocate(dlthis->mysym,
+					 sizeof(struct tramp_img_dup_relo));
+		if (dup_relo != NULL) {
+			/*  Copy the relo contents, adjust for the new
+			 * trampoline and add it to the list. */
+			dup_relo->relo = *rp;
+			dup_relo->relo.SYMNDX = new_tramp_sym->index;
+
+			dup_relo->next = dup_pkt->relo_chain;
+			dup_pkt->relo_chain = dup_relo;
+
+			/*  That's it, we're done.  Make sure we update our
+			 * return value to be success since everything finished
+			 * ok */
+			ret_val = 1;
+		} else
+			dload_error(dlthis, "Unable to alloc dup relo");
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	dload_tramp_avail
+ * Description: Check to see if the target supports a trampoline for this type
+ *	  of relocation.  Return true if it does, otherwise false.
+ */
+bool dload_tramp_avail(struct dload_state *dlthis, struct reloc_record_t *rp)
+{
+	bool ret_val = false;
+	u16 map_index;
+	u16 gen_index;
+
+	/*  Check type hash vs. target tramp table */
+	map_index = HASH_FUNC(rp->TYPE);
+	gen_index = tramp_map[map_index];
+	if (gen_index != TRAMP_NO_GEN_AVAIL)
+		ret_val = true;
+
+	return ret_val;
+}
+
+/*
+ * Function:	dload_tramp_generate
+ * Description: Create a new trampoline for the provided image packet and
+ *	  relocation causing problems.  This will create the trampoline
+ *	  as well as duplicate/update the image packet and relocation
+ *	  causing the problem, which will be relo'd again during
+ *	  finalization.
+ */
+int dload_tramp_generate(struct dload_state *dlthis, s16 secnn,
+			 u32 image_offset, struct image_packet_t *ipacket,
+			 struct reloc_record_t *rp)
+{
+	u16 map_index;
+	u16 gen_index;
+	int ret_val = 1;
+	char tramp_sym_str[TRAMP_SYM_PREFIX_LEN + TRAMP_SYM_HEX_ASCII_LEN];
+	struct local_symbol *ref_sym;
+	struct tramp_sym *new_tramp_sym;
+	struct tramp_sym *new_ext_sym;
+	struct tramp_string *new_tramp_str;
+	u32 new_tramp_base;
+	struct local_symbol tmp_sym;
+	struct local_symbol ext_tmp_sym;
+
+	/*  Hash the relo type to get our generator information */
+	map_index = HASH_FUNC(rp->TYPE);
+	gen_index = tramp_map[map_index];
+	if (gen_index != TRAMP_NO_GEN_AVAIL) {
+		/*  If this is the first trampoline, create the section name in
+		 * our string table for debug help later. */
+		if (dlthis->tramp.string_head == NULL) {
+			priv_tramp_string_create(dlthis,
+						 strlen(TRAMP_SECT_NAME),
+						 TRAMP_SECT_NAME);
+		}
+#ifdef ENABLE_TRAMP_DEBUG
+		dload_syms_error(dlthis->mysym,
+				 "Trampoline at img loc %x, references %x",
+				 dlthis->ldr_sections[secnn].run_addr +
+				 image_offset + rp->vaddr,
+				 dlthis->local_symtab[rp->SYMNDX].value);
+#endif
+
+		/*  Generate the trampoline string, check if already defined.
+		 * If the relo symbol index is -1, it means we need the section
+		 * info for relo later.  To do this we'll dummy up a symbol
+		 * with the section delta and run addresses. */
+		if (rp->SYMNDX == -1) {
+			ext_tmp_sym.value =
+			    dlthis->ldr_sections[secnn].run_addr;
+			ext_tmp_sym.delta = dlthis->sect_hdrs[secnn].ds_paddr;
+			ref_sym = &ext_tmp_sym;
+		} else
+			ref_sym = &(dlthis->local_symtab[rp->SYMNDX]);
+
+		priv_tramp_sym_gen_name(ref_sym->value, tramp_sym_str);
+		new_tramp_sym = priv_tramp_sym_find(dlthis, tramp_sym_str);
+		if (new_tramp_sym == NULL) {
+			/*  If tramp string not defined, create it and a new
+			 * string, and symbol for it as well as the original
+			 * symbol which caused the trampoline. */
+			new_tramp_str = priv_tramp_string_create(dlthis,
+								strlen
+								(tramp_sym_str),
+								 tramp_sym_str);
+			if (new_tramp_str == NULL) {
+				dload_error(dlthis, "Failed to create new "
+					    "trampoline string\n");
+				ret_val = 0;
+			} else {
+				/*  Allocate tramp section space for the new
+				 * tramp from the target */
+				new_tramp_base = priv_tramp_sect_alloc(dlthis,
+						       tramp_size_get());
+
+				/*  We have a string, create the new symbol and
+				 * duplicate the external. */
+				tmp_sym.value = new_tramp_base;
+				tmp_sym.delta = 0;
+				tmp_sym.secnn = -1;
+				tmp_sym.sclass = 0;
+				new_tramp_sym = priv_tramp_sym_create(dlthis,
+							      new_tramp_str->
+							      index,
+							      &tmp_sym);
+
+				new_ext_sym = priv_tramp_sym_create(dlthis, -1,
+								    ref_sym);
+
+				if ((new_tramp_sym != NULL) &&
+				    (new_ext_sym != NULL)) {
+					/*  Call the image generator to get the
+					 * new image data and fix up its
+					 * relocations for the external
+					 * symbol. */
+					ret_val = priv_tgt_img_gen(dlthis,
+								 new_tramp_base,
+								 gen_index,
+								 new_ext_sym);
+
+					/*  Add generated image data to tramp
+					 * image list */
+					if (ret_val != 1) {
+						dload_error(dlthis, "Failed to "
+							    "create img pkt for"
+							    " trampoline\n");
+					}
+				} else {
+					dload_error(dlthis, "Failed to create "
+						    "new tramp syms "
+						    "(%8.8X, %8.8X)\n",
+						    new_tramp_sym, new_ext_sym);
+					ret_val = 0;
+				}
+			}
+		}
+
+		/*  Duplicate the image data and relo record that caused the
+		 * tramp, including update the relo data to point to the tramp
+		 * symbol. */
+		if (ret_val == 1) {
+			ret_val = priv_img_pkt_dup(dlthis, secnn, image_offset,
+						   ipacket, rp, new_tramp_sym);
+			if (ret_val != 1) {
+				dload_error(dlthis, "Failed to create dup of "
+					    "original img pkt\n");
+			}
+		}
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	dload_tramp_pkt_update
+ * Description: Update the duplicate copy of this image packet, which the
+ *	  trampoline layer is already tracking.  This is call is critical
+ *	  to make if trampolines were generated anywhere within the
+ *	  packet and first pass relo continued on the remainder.  The
+ *	  trampoline layer needs the updates image data so when 2nd
+ *	  pass relo is done during finalize the image packet can be
+ *	  written to the target since all relo is done.
+ */
+int dload_tramp_pkt_udpate(struct dload_state *dlthis, s16 secnn,
+			   u32 image_offset, struct image_packet_t *ipacket)
+{
+	struct tramp_img_dup_pkt *dup_pkt = NULL;
+	s32 i;
+	int ret_val = 0;
+
+	/*  Find the image packet in question, the caller needs us to update it
+	   since a trampoline was previously generated. */
+	dup_pkt = priv_dup_find(dlthis, secnn, image_offset);
+	if (dup_pkt != NULL) {
+		for (i = 0; i < dup_pkt->img_pkt.packet_size; i++)
+			*(dup_pkt->img_pkt.img_data + i) =
+			    *(ipacket->img_data + i);
+
+		ret_val = 1;
+	} else {
+		dload_error(dlthis,
+			    "Unable to find existing DUP pkt for %x, offset %x",
+			    secnn, image_offset);
+
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	dload_tramp_finalize
+ * Description: If any trampolines were created, finalize everything on the
+ *	  target by allocating the trampoline section on the target,
+ *	  finalizing the trampoline symbols, finalizing the trampoline
+ *	  packets (write the new section to target memory) and finalize
+ *	  the duplicate packets by doing 2nd pass relo over them.
+ */
+int dload_tramp_finalize(struct dload_state *dlthis)
+{
+	int ret_val = 1;
+
+	if (dlthis->tramp.tramp_sect_next_addr != 0) {
+		/*  Finalize strings into a flat table.  This is needed so it
+		 * can be added to the debug string table later. */
+		ret_val = priv_string_tbl_finalize(dlthis);
+
+		/*  Do target allocation for section BEFORE finalizing
+		 * symbols. */
+		if (ret_val != 0)
+			ret_val = priv_tramp_sect_tgt_alloc(dlthis);
+
+		/*  Finalize symbols with their correct target information and
+		 * flatten */
+		if (ret_val != 0)
+			ret_val = priv_tramp_sym_finalize(dlthis);
+
+		/*  Finalize all trampoline packets.  This performs the
+		 * relocation on the packets as well as writing them to target
+		 * memory. */
+		if (ret_val != 0)
+			ret_val = priv_tramp_pkt_finalize(dlthis);
+
+		/*  Perform a 2nd pass relocation on the dup list. */
+		if (ret_val != 0)
+			ret_val = priv_dup_pkt_finalize(dlthis);
+	}
+
+	return ret_val;
+}
+
+/*
+ * Function:	dload_tramp_cleanup
+ * Description: Release all temporary resources used in the trampoline layer.
+ *	  Note that the target memory which may have been allocated and
+ *	  written to store the trampolines is NOT RELEASED HERE since it
+ *	  is potentially still in use.  It is automatically released
+ *	  when the module is unloaded.
+ */
+void dload_tramp_cleanup(struct dload_state *dlthis)
+{
+	struct tramp_info *tramp = &dlthis->tramp;
+	struct tramp_sym *cur_sym;
+	struct tramp_string *cur_string;
+	struct tramp_img_pkt *cur_tramp_pkt;
+	struct tramp_img_dup_pkt *cur_dup_pkt;
+	struct tramp_img_dup_relo *cur_dup_relo;
+
+	/*  If there were no tramps generated, just return */
+	if (tramp->tramp_sect_next_addr == 0)
+		return;
+
+	/*  Destroy all tramp information */
+	for (cur_sym = tramp->symbol_head;
+	     cur_sym != NULL; cur_sym = tramp->symbol_head) {
+		tramp->symbol_head = cur_sym->next;
+		if (tramp->symbol_tail == cur_sym)
+			tramp->symbol_tail = NULL;
+
+		dlthis->mysym->dload_deallocate(dlthis->mysym, cur_sym);
+	}
+
+	if (tramp->final_sym_table != NULL)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						tramp->final_sym_table);
+
+	for (cur_string = tramp->string_head;
+	     cur_string != NULL; cur_string = tramp->string_head) {
+		tramp->string_head = cur_string->next;
+		if (tramp->string_tail == cur_string)
+			tramp->string_tail = NULL;
+
+		dlthis->mysym->dload_deallocate(dlthis->mysym, cur_string);
+	}
+
+	if (tramp->final_string_table != NULL)
+		dlthis->mysym->dload_deallocate(dlthis->mysym,
+						tramp->final_string_table);
+
+	for (cur_tramp_pkt = tramp->tramp_pkts;
+	     cur_tramp_pkt != NULL; cur_tramp_pkt = tramp->tramp_pkts) {
+		tramp->tramp_pkts = cur_tramp_pkt->next;
+		dlthis->mysym->dload_deallocate(dlthis->mysym, cur_tramp_pkt);
+	}
+
+	for (cur_dup_pkt = tramp->dup_pkts;
+	     cur_dup_pkt != NULL; cur_dup_pkt = tramp->dup_pkts) {
+		tramp->dup_pkts = cur_dup_pkt->next;
+
+		for (cur_dup_relo = cur_dup_pkt->relo_chain;
+		     cur_dup_relo != NULL;
+		     cur_dup_relo = cur_dup_pkt->relo_chain) {
+			cur_dup_pkt->relo_chain = cur_dup_relo->next;
+			dlthis->mysym->dload_deallocate(dlthis->mysym,
+							cur_dup_relo);
+		}
+
+		dlthis->mysym->dload_deallocate(dlthis->mysym, cur_dup_pkt);
+	}
+}
diff --git a/drivers/staging/tidspbridge/dynload/tramp_table_c6000.c b/drivers/staging/tidspbridge/dynload/tramp_table_c6000.c
new file mode 100644
index 00000000000..09cc64f213c
--- /dev/null
+++ b/drivers/staging/tidspbridge/dynload/tramp_table_c6000.c
@@ -0,0 +1,164 @@
+/*
+ * tramp_table_c6000.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include "dload_internal.h"
+
+/*  These are defined in coff.h, but may not be available on all platforms
+	so we'll go ahead and define them here. */
+#ifndef R_C60LO16
+#define R_C60LO16	  0x54	/* C60: MVK Low Half Register */
+#define R_C60HI16	  0x55	/* C60: MVKH/MVKLH High Half Register */
+#endif
+
+#define C6X_TRAMP_WORD_COUNT			8
+#define C6X_TRAMP_MAX_RELOS			 8
+
+/*  THIS HASH FUNCTION MUST MATCH THE ONE reloc_table_c6000.c */
+#define HASH_FUNC(zz) (((((zz) + 1) * 1845UL) >> 11) & 63)
+
+/*  THIS MUST MATCH reloc_record_t FOR A SYMBOL BASED RELO */
+struct c6000_relo_record {
+	s32 vaddr;
+	s32 symndx;
+#ifndef _BIG_ENDIAN
+	u16 disp;
+	u16 type;
+#else
+	u16 type;
+	u16 disp;
+#endif
+};
+
+struct c6000_gen_code {
+	struct tramp_gen_code_hdr hdr;
+	u32 tramp_instrs[C6X_TRAMP_WORD_COUNT];
+	struct c6000_relo_record relos[C6X_TRAMP_MAX_RELOS];
+};
+
+/*  Hash mapping for relos that can cause trampolines. */
+static const u16 tramp_map[] = {
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	0,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535,
+	65535
+};
+
+static const struct c6000_gen_code tramp_gen_info[] = {
+	/*  Tramp caused by R_C60PCR21 */
+	{
+	 /*  Header - 8 instructions, 2 relos */
+	 {
+	  sizeof(u32) * C6X_TRAMP_WORD_COUNT,
+	  2,
+	  FIELD_OFFSET(struct c6000_gen_code, relos)
+	  },
+
+	 /*  Trampoline instructions */
+	 {
+	  0x053C54F7,		/*       STW.D2T2  B10, *sp--[2] */
+	  0x0500002A,		/*  || MVK.S2   <blank>, B10 */
+	  0x0500006A,		/*       MVKH.S2   <blank>, B10 */
+	  0x00280362,		/*       B.S2     B10 */
+	  0x053C52E6,		/*       LDW.D2T2  *++sp[2], B10 */
+	  0x00006000,		/*       NOP       4 */
+	  0x00000000,		/*       NOP */
+	  0x00000000		/*       NOP */
+	  },
+
+	 /*  Relocations */
+	 {
+	  {4, 0, 0, R_C60LO16},
+	  {8, 0, 0, R_C60HI16},
+	  {0, 0, 0, 0x0000},
+	  {0, 0, 0, 0x0000},
+	  {0, 0, 0, 0x0000},
+	  {0, 0, 0, 0x0000},
+	  {0, 0, 0, 0x0000},
+	  {0, 0, 0, 0x0000}
+	  }
+	 }
+};
+
+/*  TARGET SPECIFIC FUNCTIONS THAT MUST BE DEFINED */
+static u32 tramp_size_get(void)
+{
+	return sizeof(u32) * C6X_TRAMP_WORD_COUNT;
+}
+
+static u32 tramp_img_pkt_size_get(void)
+{
+	return sizeof(struct c6000_gen_code);
+}
diff --git a/drivers/staging/tidspbridge/gen/gb.c b/drivers/staging/tidspbridge/gen/gb.c
new file mode 100644
index 00000000000..06eb3d36122
--- /dev/null
+++ b/drivers/staging/tidspbridge/gen/gb.c
@@ -0,0 +1,167 @@
+/*
+ * gb.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Generic bitmap operations.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <linux/types.h>
+/*  ----------------------------------- This */
+#include <dspbridge/gs.h>
+#include <dspbridge/gb.h>
+
+struct gb_t_map {
+	u32 len;
+	u32 wcnt;
+	u32 *words;
+};
+
+/*
+ *  ======== gb_clear ========
+ *  purpose:
+ *      Clears a bit in the bit map.
+ */
+
+void gb_clear(struct gb_t_map *map, u32 bitn)
+{
+	u32 mask;
+
+	mask = 1L << (bitn % BITS_PER_LONG);
+	map->words[bitn / BITS_PER_LONG] &= ~mask;
+}
+
+/*
+ *  ======== gb_create ========
+ *  purpose:
+ *      Creates a bit map.
+ */
+
+struct gb_t_map *gb_create(u32 len)
+{
+	struct gb_t_map *map;
+	u32 i;
+	map = (struct gb_t_map *)gs_alloc(sizeof(struct gb_t_map));
+	if (map != NULL) {
+		map->len = len;
+		map->wcnt = len / BITS_PER_LONG + 1;
+		map->words = (u32 *) gs_alloc(map->wcnt * sizeof(u32));
+		if (map->words != NULL) {
+			for (i = 0; i < map->wcnt; i++)
+				map->words[i] = 0L;
+
+		} else {
+			gs_frees(map, sizeof(struct gb_t_map));
+			map = NULL;
+		}
+	}
+
+	return map;
+}
+
+/*
+ *  ======== gb_delete ========
+ *  purpose:
+ *      Frees a bit map.
+ */
+
+void gb_delete(struct gb_t_map *map)
+{
+	gs_frees(map->words, map->wcnt * sizeof(u32));
+	gs_frees(map, sizeof(struct gb_t_map));
+}
+
+/*
+ *  ======== gb_findandset ========
+ *  purpose:
+ *      Finds a free bit and sets it.
+ */
+u32 gb_findandset(struct gb_t_map *map)
+{
+	u32 bitn;
+
+	bitn = gb_minclear(map);
+
+	if (bitn != GB_NOBITS)
+		gb_set(map, bitn);
+
+	return bitn;
+}
+
+/*
+ *  ======== gb_minclear ========
+ *  purpose:
+ *      returns the location of the first unset bit in the bit map.
+ */
+u32 gb_minclear(struct gb_t_map *map)
+{
+	u32 bit_location = 0;
+	u32 bit_acc = 0;
+	u32 i;
+	u32 bit;
+	u32 *word;
+
+	for (word = map->words, i = 0; i < map->wcnt; word++, i++) {
+		if (~*word) {
+			for (bit = 0; bit < BITS_PER_LONG; bit++, bit_acc++) {
+				if (bit_acc == map->len)
+					return GB_NOBITS;
+
+				if (~*word & (1L << bit)) {
+					bit_location = i * BITS_PER_LONG + bit;
+					return bit_location;
+				}
+
+			}
+		} else {
+			bit_acc += BITS_PER_LONG;
+		}
+	}
+
+	return GB_NOBITS;
+}
+
+/*
+ *  ======== gb_set ========
+ *  purpose:
+ *      Sets a bit in the bit map.
+ */
+
+void gb_set(struct gb_t_map *map, u32 bitn)
+{
+	u32 mask;
+
+	mask = 1L << (bitn % BITS_PER_LONG);
+	map->words[bitn / BITS_PER_LONG] |= mask;
+}
+
+/*
+ *  ======== gb_test ========
+ *  purpose:
+ *      Returns true if the bit is set in the specified location.
+ */
+
+bool gb_test(struct gb_t_map *map, u32 bitn)
+{
+	bool state;
+	u32 mask;
+	u32 word;
+
+	mask = 1L << (bitn % BITS_PER_LONG);
+	word = map->words[bitn / BITS_PER_LONG];
+	state = word & mask ? true : false;
+
+	return state;
+}
diff --git a/drivers/staging/tidspbridge/gen/gh.c b/drivers/staging/tidspbridge/gen/gh.c
new file mode 100644
index 00000000000..f72d943c480
--- /dev/null
+++ b/drivers/staging/tidspbridge/gen/gh.c
@@ -0,0 +1,215 @@
+/*
+ * gh.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+#include <dspbridge/host_os.h>
+
+#include <dspbridge/gs.h>
+
+#include <dspbridge/gh.h>
+
+struct element {
+	struct element *next;
+	u8 data[1];
+};
+
+struct gh_t_hash_tab {
+	u16 max_bucket;
+	u16 val_size;
+	struct element **buckets;
+	 u16(*hash) (void *, u16);
+	 bool(*match) (void *, void *);
+	void (*delete) (void *);
+};
+
+static void noop(void *p);
+static s32 cur_init;
+static void myfree(void *ptr, s32 size);
+
+/*
+ *  ======== gh_create ========
+ */
+
+struct gh_t_hash_tab *gh_create(u16 max_bucket, u16 val_size,
+				u16(*hash) (void *, u16), bool(*match) (void *,
+									void *),
+				void (*delete) (void *))
+{
+	struct gh_t_hash_tab *hash_tab;
+	u16 i;
+	hash_tab =
+	    (struct gh_t_hash_tab *)gs_alloc(sizeof(struct gh_t_hash_tab));
+	if (hash_tab == NULL)
+		return NULL;
+	hash_tab->max_bucket = max_bucket;
+	hash_tab->val_size = val_size;
+	hash_tab->hash = hash;
+	hash_tab->match = match;
+	hash_tab->delete = delete == NULL ? noop : delete;
+
+	hash_tab->buckets = (struct element **)
+	    gs_alloc(sizeof(struct element *) * max_bucket);
+	if (hash_tab->buckets == NULL) {
+		gh_delete(hash_tab);
+		return NULL;
+	}
+
+	for (i = 0; i < max_bucket; i++)
+		hash_tab->buckets[i] = NULL;
+
+	return hash_tab;
+}
+
+/*
+ *  ======== gh_delete ========
+ */
+void gh_delete(struct gh_t_hash_tab *hash_tab)
+{
+	struct element *elem, *next;
+	u16 i;
+
+	if (hash_tab != NULL) {
+		if (hash_tab->buckets != NULL) {
+			for (i = 0; i < hash_tab->max_bucket; i++) {
+				for (elem = hash_tab->buckets[i]; elem != NULL;
+				     elem = next) {
+					next = elem->next;
+					(*hash_tab->delete) (elem->data);
+					myfree(elem,
+					       sizeof(struct element) - 1 +
+					       hash_tab->val_size);
+				}
+			}
+
+			myfree(hash_tab->buckets, sizeof(struct element *)
+			       * hash_tab->max_bucket);
+		}
+
+		myfree(hash_tab, sizeof(struct gh_t_hash_tab));
+	}
+}
+
+/*
+ *  ======== gh_exit ========
+ */
+
+void gh_exit(void)
+{
+	if (cur_init-- == 1)
+		gs_exit();
+
+}
+
+/*
+ *  ======== gh_find ========
+ */
+
+void *gh_find(struct gh_t_hash_tab *hash_tab, void *key)
+{
+	struct element *elem;
+
+	elem = hash_tab->buckets[(*hash_tab->hash) (key, hash_tab->max_bucket)];
+
+	for (; elem; elem = elem->next) {
+		if ((*hash_tab->match) (key, elem->data))
+			return elem->data;
+	}
+
+	return NULL;
+}
+
+/*
+ *  ======== gh_init ========
+ */
+
+void gh_init(void)
+{
+	if (cur_init++ == 0)
+		gs_init();
+}
+
+/*
+ *  ======== gh_insert ========
+ */
+
+void *gh_insert(struct gh_t_hash_tab *hash_tab, void *key, void *value)
+{
+	struct element *elem;
+	u16 i;
+	char *src, *dst;
+
+	elem = (struct element *)gs_alloc(sizeof(struct element) - 1 +
+					  hash_tab->val_size);
+	if (elem != NULL) {
+
+		dst = (char *)elem->data;
+		src = (char *)value;
+		for (i = 0; i < hash_tab->val_size; i++)
+			*dst++ = *src++;
+
+		i = (*hash_tab->hash) (key, hash_tab->max_bucket);
+		elem->next = hash_tab->buckets[i];
+		hash_tab->buckets[i] = elem;
+
+		return elem->data;
+	}
+
+	return NULL;
+}
+
+/*
+ *  ======== noop ========
+ */
+/* ARGSUSED */
+static void noop(void *p)
+{
+	p = p;			/* stifle compiler warning */
+}
+
+/*
+ *  ======== myfree ========
+ */
+static void myfree(void *ptr, s32 size)
+{
+	gs_free(ptr);
+}
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/**
+ * gh_iterate() - This function goes through all the elements in the hash table
+ *		looking for the dsp symbols.
+ * @hash_tab:	Hash table
+ * @callback:	pointer to callback function
+ * @user_data:	User data, contains the find_symbol_context pointer
+ *
+ */
+void gh_iterate(struct gh_t_hash_tab *hash_tab,
+		void (*callback)(void *, void *), void *user_data)
+{
+	struct element *elem;
+	u32 i;
+
+	if (hash_tab && hash_tab->buckets)
+		for (i = 0; i < hash_tab->max_bucket; i++) {
+			elem = hash_tab->buckets[i];
+			while (elem) {
+				callback(&elem->data, user_data);
+				elem = elem->next;
+			}
+		}
+}
+#endif
diff --git a/drivers/staging/tidspbridge/gen/gs.c b/drivers/staging/tidspbridge/gen/gs.c
new file mode 100644
index 00000000000..9fc614439ba
--- /dev/null
+++ b/drivers/staging/tidspbridge/gen/gs.c
@@ -0,0 +1,89 @@
+/*
+ * gs.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * General storage memory allocator services.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+#include <linux/types.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/gs.h>
+
+#include <linux/slab.h>
+
+/*  ----------------------------------- Globals */
+static u32 cumsize;
+
+/*
+ *  ======== gs_alloc ========
+ *  purpose:
+ *      Allocates memory of the specified size.
+ */
+void *gs_alloc(u32 size)
+{
+	void *p;
+
+	p = kzalloc(size, GFP_KERNEL);
+	if (p == NULL)
+		return NULL;
+	cumsize += size;
+	return p;
+}
+
+/*
+ *  ======== gs_exit ========
+ *  purpose:
+ *      Discontinue the usage of the GS module.
+ */
+void gs_exit(void)
+{
+	/* Do nothing */
+}
+
+/*
+ *  ======== gs_free ========
+ *  purpose:
+ *      Frees the memory.
+ */
+void gs_free(void *ptr)
+{
+	kfree(ptr);
+	/* ack! no size info */
+	/* cumsize -= size; */
+}
+
+/*
+ *  ======== gs_frees ========
+ *  purpose:
+ *      Frees the memory.
+ */
+void gs_frees(void *ptr, u32 size)
+{
+	kfree(ptr);
+	cumsize -= size;
+}
+
+/*
+ *  ======== gs_init ========
+ *  purpose:
+ *      Initializes the GS module.
+ */
+void gs_init(void)
+{
+	/* Do nothing */
+}
diff --git a/drivers/staging/tidspbridge/gen/uuidutil.c b/drivers/staging/tidspbridge/gen/uuidutil.c
new file mode 100644
index 00000000000..da39c4fbf33
--- /dev/null
+++ b/drivers/staging/tidspbridge/gen/uuidutil.c
@@ -0,0 +1,113 @@
+/*
+ * uuidutil.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file contains the implementation of UUID helper functions.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/uuidutil.h>
+
+/*
+ *  ======== uuid_uuid_to_string ========
+ *  Purpose:
+ *      Converts a struct dsp_uuid to a string.
+ *      Note: snprintf format specifier is:
+ *      %[flags] [width] [.precision] [{h | l | I64 | L}]type
+ */
+void uuid_uuid_to_string(struct dsp_uuid *uuid_obj, char *sz_uuid,
+			 s32 size)
+{
+	s32 i;			/* return result from snprintf. */
+
+	DBC_REQUIRE(uuid_obj && sz_uuid);
+
+	i = snprintf(sz_uuid, size,
+		     "%.8X_%.4X_%.4X_%.2X%.2X_%.2X%.2X%.2X%.2X%.2X%.2X",
+		     uuid_obj->ul_data1, uuid_obj->us_data2, uuid_obj->us_data3,
+		     uuid_obj->uc_data4, uuid_obj->uc_data5,
+		     uuid_obj->uc_data6[0], uuid_obj->uc_data6[1],
+		     uuid_obj->uc_data6[2], uuid_obj->uc_data6[3],
+		     uuid_obj->uc_data6[4], uuid_obj->uc_data6[5]);
+
+	DBC_ENSURE(i != -1);
+}
+
+static s32 uuid_hex_to_bin(char *buf, s32 len)
+{
+	s32 i;
+	s32 result = 0;
+	int value;
+
+	for (i = 0; i < len; i++) {
+		value = hex_to_bin(*buf++);
+		result *= 16;
+		if (value > 0)
+			result += value;
+	}
+
+	return result;
+}
+
+/*
+ *  ======== uuid_uuid_from_string ========
+ *  Purpose:
+ *      Converts a string to a struct dsp_uuid.
+ */
+void uuid_uuid_from_string(char *sz_uuid, struct dsp_uuid *uuid_obj)
+{
+	s32 j;
+
+	uuid_obj->ul_data1 = uuid_hex_to_bin(sz_uuid, 8);
+	sz_uuid += 8;
+
+	/* Step over underscore */
+	sz_uuid++;
+
+	uuid_obj->us_data2 = (u16) uuid_hex_to_bin(sz_uuid, 4);
+	sz_uuid += 4;
+
+	/* Step over underscore */
+	sz_uuid++;
+
+	uuid_obj->us_data3 = (u16) uuid_hex_to_bin(sz_uuid, 4);
+	sz_uuid += 4;
+
+	/* Step over underscore */
+	sz_uuid++;
+
+	uuid_obj->uc_data4 = (u8) uuid_hex_to_bin(sz_uuid, 2);
+	sz_uuid += 2;
+
+	uuid_obj->uc_data5 = (u8) uuid_hex_to_bin(sz_uuid, 2);
+	sz_uuid += 2;
+
+	/* Step over underscore */
+	sz_uuid++;
+
+	for (j = 0; j < 6; j++) {
+		uuid_obj->uc_data6[j] = (u8) uuid_hex_to_bin(sz_uuid, 2);
+		sz_uuid += 2;
+	}
+}
diff --git a/drivers/staging/tidspbridge/hw/EasiGlobal.h b/drivers/staging/tidspbridge/hw/EasiGlobal.h
new file mode 100644
index 00000000000..e48d7f67c60
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/EasiGlobal.h
@@ -0,0 +1,41 @@
+/*
+ * EasiGlobal.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _EASIGLOBAL_H
+#define _EASIGLOBAL_H
+#include <linux/types.h>
+
+/*
+ * DEFINE:        READ_ONLY, WRITE_ONLY &  READ_WRITE
+ *
+ * DESCRIPTION: Defines used to describe register types for EASI-checker tests.
+ */
+
+#define READ_ONLY    1
+#define WRITE_ONLY   2
+#define READ_WRITE   3
+
+/*
+ * MACRO:        _DEBUG_LEVEL1_EASI
+ *
+ * DESCRIPTION:  A MACRO which can be used to indicate that a particular beach
+ *               register access function was called.
+ *
+ * NOTE:         We currently dont use this functionality.
+ */
+#define _DEBUG_LEVEL1_EASI(easi_num)     ((void)0)
+
+#endif /* _EASIGLOBAL_H */
diff --git a/drivers/staging/tidspbridge/hw/MMUAccInt.h b/drivers/staging/tidspbridge/hw/MMUAccInt.h
new file mode 100644
index 00000000000..1cefca321d7
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMUAccInt.h
@@ -0,0 +1,76 @@
+/*
+ * MMUAccInt.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_ACC_INT_H
+#define _MMU_ACC_INT_H
+
+/* Mappings of level 1 EASI function numbers to function names */
+
+#define EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32 (MMU_BASE_EASIL1 + 3)
+#define EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32  (MMU_BASE_EASIL1 + 17)
+#define EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32    (MMU_BASE_EASIL1 + 39)
+#define EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 51)
+#define EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32 (MMU_BASE_EASIL1 + 102)
+#define EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 103)
+#define EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32 (MMU_BASE_EASIL1 + 156)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32 (MMU_BASE_EASIL1 + 174)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32   (MMU_BASE_EASIL1 + 180)
+#define EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32     (MMU_BASE_EASIL1 + 190)
+#define EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32   (MMU_BASE_EASIL1 + 194)
+#define EASIL1_MMUMMU_TTB_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 198)
+#define EASIL1_MMUMMU_LOCK_READ_REGISTER32   (MMU_BASE_EASIL1 + 203)
+#define EASIL1_MMUMMU_LOCK_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 204)
+#define EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32  (MMU_BASE_EASIL1 + 205)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32 (MMU_BASE_EASIL1 + 209)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32 (MMU_BASE_EASIL1 + 211)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32  (MMU_BASE_EASIL1 + 212)
+#define EASIL1_MMUMMU_LD_TLB_READ_REGISTER32    (MMU_BASE_EASIL1 + 213)
+#define EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 214)
+#define EASIL1_MMUMMU_CAM_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 226)
+#define EASIL1_MMUMMU_RAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 268)
+#define EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 322)
+
+/* Register offset address definitions */
+#define MMU_MMU_SYSCONFIG_OFFSET   0x10
+#define MMU_MMU_IRQSTATUS_OFFSET  0x18
+#define MMU_MMU_IRQENABLE_OFFSET    0x1c
+#define MMU_MMU_WALKING_ST_OFFSET 0x40
+#define MMU_MMU_CNTL_OFFSET   0x44
+#define MMU_MMU_FAULT_AD_OFFSET  0x48
+#define MMU_MMU_TTB_OFFSET  0x4c
+#define MMU_MMU_LOCK_OFFSET   0x50
+#define MMU_MMU_LD_TLB_OFFSET  0x54
+#define MMU_MMU_CAM_OFFSET   0x58
+#define MMU_MMU_RAM_OFFSET   0x5c
+#define MMU_MMU_GFLUSH_OFFSET  0x60
+#define MMU_MMU_FLUSH_ENTRY_OFFSET  0x64
+/* Bitfield mask and offset declarations */
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_MASK  0x18
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET  3
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK  0x1
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET   0
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_MASK 0x1
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET  0
+#define MMU_MMU_CNTL_TWL_ENABLE_MASK 0x4
+#define MMU_MMU_CNTL_TWL_ENABLE_OFFSET 2
+#define MMU_MMU_CNTL_MMU_ENABLE_MASK    0x2
+#define MMU_MMU_CNTL_MMU_ENABLE_OFFSET   1
+#define MMU_MMU_LOCK_BASE_VALUE_MASK 0xfc00
+#define MMU_MMU_LOCK_BASE_VALUE_OFFSET   10
+#define MMU_MMU_LOCK_CURRENT_VICTIM_MASK   0x3f0
+#define MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET    4
+
+#endif /* _MMU_ACC_INT_H */
diff --git a/drivers/staging/tidspbridge/hw/MMURegAcM.h b/drivers/staging/tidspbridge/hw/MMURegAcM.h
new file mode 100644
index 00000000000..ab1a16da731
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMURegAcM.h
@@ -0,0 +1,225 @@
+/*
+ * MMURegAcM.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_REG_ACM_H
+#define _MMU_REG_ACM_H
+
+#include <linux/io.h>
+#include <EasiGlobal.h>
+
+#include "MMUAccInt.h"
+
+#if defined(USE_LEVEL_1_MACROS)
+
+#define MMUMMU_SYSCONFIG_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_SYSCONFIG_OFFSET))
+
+#define MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_IDLE_MODE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_IDLE_MODE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_IRQSTATUS_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(easil1_mmummu_irqstatus_read_register32),\
+      __raw_readl((base_address)+MMU_MMU_IRQSTATUS_OFFSET))
+
+#define MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQSTATUS_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_IRQENABLE_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_IRQENABLE_OFFSET))
+
+#define MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQENABLE_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_WALKING_STTWL_RUNNING_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_WALKING_ST_OFFSET))))\
+      & MMU_MMU_WALKING_ST_TWL_RUNNING_MASK) >>\
+      MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_CNTL_OFFSET)))) &\
+      MMU_MMU_CNTL_TWL_ENABLE_MASK) >>\
+      MMU_MMU_CNTL_TWL_ENABLE_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_TWL_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_TWL_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_TWL_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_MMU_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_MMU_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_MMU_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_FAULT_AD_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_FAULT_AD_OFFSET))
+
+#define MMUMMU_TTB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_TTB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_TTB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LOCK_OFFSET))
+
+#define MMUMMU_LOCK_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_BASE_VALUE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_BASE_VALUE_MASK) >>\
+      MMU_MMU_LOCK_BASE_VALUE_OFFSET))
+
+#define MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(easil1_mmummu_lock_base_value_write32);\
+    data &= ~(MMU_MMU_LOCK_BASE_VALUE_MASK);\
+    new_value <<= MMU_MMU_LOCK_BASE_VALUE_OFFSET;\
+    new_value &= MMU_MMU_LOCK_BASE_VALUE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK) >>\
+      MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET))
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32);\
+    data &= ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK);\
+    new_value <<= MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET;\
+    new_value &= MMU_MMU_LOCK_CURRENT_VICTIM_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_SET32(var, value)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32),\
+      (((var) & ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK)) |\
+      (((value) << MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK)))
+
+#define MMUMMU_LD_TLB_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LD_TLB_OFFSET))
+
+#define MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LD_TLB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_CAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_RAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_RAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_RAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_FLUSH_ENTRY_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#endif /* USE_LEVEL_1_MACROS */
+
+#endif /* _MMU_REG_ACM_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_defs.h b/drivers/staging/tidspbridge/hw/hw_defs.h
new file mode 100644
index 00000000000..d5266d4c163
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_defs.h
@@ -0,0 +1,58 @@
+/*
+ * hw_defs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global HW definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_DEFS_H
+#define _HW_DEFS_H
+
+/* Page size */
+#define HW_PAGE_SIZE4KB   0x1000
+#define HW_PAGE_SIZE64KB  0x10000
+#define HW_PAGE_SIZE1MB   0x100000
+#define HW_PAGE_SIZE16MB  0x1000000
+
+/* hw_status:  return type for HW API */
+typedef long hw_status;
+
+/*  Macro used to set and clear any bit */
+#define HW_CLEAR	0
+#define HW_SET		1
+
+/* hw_endianism_t:  Enumerated Type used to specify the endianism
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_endianism_t {
+	HW_LITTLE_ENDIAN,
+	HW_BIG_ENDIAN
+};
+
+/* hw_element_size_t:  Enumerated Type used to specify the element size
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_element_size_t {
+	HW_ELEM_SIZE8BIT,
+	HW_ELEM_SIZE16BIT,
+	HW_ELEM_SIZE32BIT,
+	HW_ELEM_SIZE64BIT
+};
+
+/* hw_idle_mode_t:  Enumerated Type used to specify Idle modes */
+enum hw_idle_mode_t {
+	HW_FORCE_IDLE,
+	HW_NO_IDLE,
+	HW_SMART_IDLE
+};
+
+#endif /* _HW_DEFS_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
new file mode 100644
index 00000000000..014f5d5293a
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -0,0 +1,562 @@
+/*
+ * hw_mmu.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * API definitions to setup MMU TLB and PTE
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/io.h>
+#include "MMURegAcM.h"
+#include <hw_defs.h>
+#include <hw_mmu.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#define MMU_BASE_VAL_MASK	0xFC00
+#define MMU_PAGE_MAX	     3
+#define MMU_ELEMENTSIZE_MAX      3
+#define MMU_ADDR_MASK	    0xFFFFF000
+#define MMU_TTB_MASK	     0xFFFFC000
+#define MMU_SECTION_ADDR_MASK    0xFFF00000
+#define MMU_SSECTION_ADDR_MASK   0xFF000000
+#define MMU_PAGE_TABLE_MASK      0xFFFFFC00
+#define MMU_LARGE_PAGE_MASK      0xFFFF0000
+#define MMU_SMALL_PAGE_MASK      0xFFFFF000
+
+#define MMU_LOAD_TLB	0x00000001
+#define MMU_GFLUSH	0x60
+
+/*
+ * hw_mmu_page_size_t: Enumerated Type used to specify the MMU Page Size(SLSS)
+ */
+enum hw_mmu_page_size_t {
+	HW_MMU_SECTION,
+	HW_MMU_LARGE_PAGE,
+	HW_MMU_SMALL_PAGE,
+	HW_MMU_SUPERSECTION
+};
+
+/*
+ * FUNCTION	      : mmu_flush_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ * RETURNS:
+ *
+ *       Type		: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer
+ *						Paramater was set to NULL
+ *
+ * PURPOSE:	      : Flush the TLB entry pointed by the
+ *			lock counter register
+ *			even if this entry is set protected
+ *
+ * METHOD:	       : Check the Input parameter and Flush a
+ *			 single entry in the TLB.
+ */
+static hw_status mmu_flush_entry(const void __iomem *base_address);
+
+/*
+ * FUNCTION	      : mmu_set_cam_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       TypE		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : page_sz
+ *       TypE		: const u32
+ *       Description     : It indicates the page size
+ *
+ *       Identifier      : preserved_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is preserved entry
+ *							or not
+ *
+ *       Identifier      : valid_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is valid entry or not
+ *
+ *
+ *       Identifier      : virtual_addr_tag
+ *       Type	    	: const u32
+ *       Description     : virtual Address
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *						   was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter out
+ *						   of Range
+ *
+ * PURPOSE:	      	: Set MMU_CAM reg
+ *
+ * METHOD:	       	: Check the Input parameters and set the CAM entry.
+ */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag);
+
+/*
+ * FUNCTION	      : mmu_set_ram_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type	    	: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : physical_addr
+ *       Type	    	: const u32
+ *       Description     : Physical Address to which the corresponding
+ *			 virtual   Address shouldpoint
+ *
+ *       Identifier      : endianism
+ *       Type	    	: hw_endianism_t
+ *       Description     : endianism for the given page
+ *
+ *       Identifier      : element_size
+ *       Type	    	: hw_element_size_t
+ *       Description     : The element size ( 8,16, 32 or 64 bit)
+ *
+ *       Identifier      : mixed_size
+ *       Type	    	: hw_mmu_mixed_size_t
+ *       Description     : Element Size to follow CPU or TLB
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *							was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter
+ *							out of Range
+ *
+ * PURPOSE:	      : Set MMU_CAM reg
+ *
+ * METHOD:	       : Check the Input parameters and set the RAM entry.
+ */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size);
+
+/* HW FUNCTIONS */
+
+hw_status hw_mmu_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				u32 num_locked_entries)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, num_locked_entries);
+
+	return status;
+}
+
+hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				u32 victim_entry_num)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, victim_entry_num);
+
+	return status;
+}
+
+hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+
+	MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg & ~irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg | irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+{
+	hw_status status = 0;
+
+	*irq_mask = MMUMMU_IRQSTATUS_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+{
+	hw_status status = 0;
+
+	/* read values from register */
+	*addr = MMUMMU_FAULT_AD_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+{
+	hw_status status = 0;
+	u32 load_ttb;
+
+	load_ttb = ttb_phys_addr & ~0x7FUL;
+	/* write values to register */
+	MMUMMU_TTB_WRITE_REGISTER32(base_address, load_ttb);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
+			   u32 page_sz)
+{
+	hw_status status = 0;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t pg_size_bits;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pg_size_bits = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		pg_size_bits = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pg_size_bits = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		pg_size_bits = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
+
+	mmu_flush_entry(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz,
+			 u32 entry_num,
+			 struct hw_mmu_map_attrs_t *map_attrs,
+			 s8 preserved_bit, s8 valid_bit)
+{
+	hw_status status = 0;
+	u32 lock_reg;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t mmu_pg_size;
+
+	/*Check the input Parameters */
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		mmu_pg_size = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		mmu_pg_size = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		mmu_pg_size = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		mmu_pg_size = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	lock_reg = MMUMMU_LOCK_READ_REGISTER32(base_address);
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	/* Write the fields in the CAM Entry Register */
+	mmu_set_cam_entry(base_address, mmu_pg_size, preserved_bit, valid_bit,
+			  virtual_addr_tag);
+
+	/* Write the different fields of the RAM Entry Register */
+	/* endianism of the page,Element Size of the page (8, 16, 32, 64 bit) */
+	mmu_set_ram_entry(base_address, physical_addr, map_attrs->endianism,
+			  map_attrs->element_size, map_attrs->mixed_size);
+
+	/* Update the MMU Lock Register */
+	/* currentVictim between lockedBaseValue and (MMU_Entries_Number - 1) */
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, entry_num);
+
+	/* Enable loading of an entry in TLB by writing 1
+	   into LD_TLB_REG register */
+	MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, MMU_LOAD_TLB);
+
+	MMUMMU_LOCK_WRITE_REGISTER32(base_address, lock_reg);
+
+	return status;
+}
+
+hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz, struct hw_mmu_map_attrs_t *map_attrs)
+{
+	hw_status status = 0;
+	u32 pte_addr, pte_val;
+	s32 num_entries = 1;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_SMALL_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 2);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_LARGE_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 1);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val =
+		    ((((physical_addr & MMU_SECTION_ADDR_MASK) |
+		       (map_attrs->endianism << 15) | (map_attrs->
+						       element_size << 10) |
+		       (map_attrs->mixed_size << 17)) & ~0x40000) | 0x2);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		pte_val =
+		    (((physical_addr & MMU_SSECTION_ADDR_MASK) |
+		      (map_attrs->endianism << 15) | (map_attrs->
+						      element_size << 10) |
+		      (map_attrs->mixed_size << 17)
+		     ) | 0x40000 | 0x2);
+		break;
+
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val = (physical_addr & MMU_PAGE_TABLE_MASK) | 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = pte_val;
+
+	return status;
+}
+
+hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size)
+{
+	hw_status status = 0;
+	u32 pte_addr;
+	s32 num_entries = 1;
+
+	switch (page_size) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = 0;
+
+	return status;
+}
+
+/* mmu_flush_entry */
+static hw_status mmu_flush_entry(const void __iomem *base_address)
+{
+	hw_status status = 0;
+	u32 flush_entry_data = 0x1;
+
+	/* write values to register */
+	MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
+
+	return status;
+}
+
+/* mmu_set_cam_entry */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag)
+{
+	hw_status status = 0;
+	u32 mmu_cam_reg;
+
+	mmu_cam_reg = (virtual_addr_tag << 12);
+	mmu_cam_reg = (mmu_cam_reg) | (page_sz) | (valid_bit << 2) |
+	    (preserved_bit << 3);
+
+	/* write values to register */
+	MMUMMU_CAM_WRITE_REGISTER32(base_address, mmu_cam_reg);
+
+	return status;
+}
+
+/* mmu_set_ram_entry */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size)
+{
+	hw_status status = 0;
+	u32 mmu_ram_reg;
+
+	mmu_ram_reg = (physical_addr & MMU_ADDR_MASK);
+	mmu_ram_reg = (mmu_ram_reg) | ((endianism << 9) | (element_size << 7) |
+				       (mixed_size << 6));
+
+	/* write values to register */
+	MMUMMU_RAM_WRITE_REGISTER32(base_address, mmu_ram_reg);
+
+	return status;
+
+}
+
+void hw_mmu_tlb_flush_all(const void __iomem *base)
+{
+	__raw_writeb(1, base + MMU_GFLUSH);
+}
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h
new file mode 100644
index 00000000000..1458a2c6027
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.h
@@ -0,0 +1,163 @@
+/*
+ * hw_mmu.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * MMU types and API declarations
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_MMU_H
+#define _HW_MMU_H
+
+#include <linux/types.h>
+
+/* Bitmasks for interrupt sources */
+#define HW_MMU_TRANSLATION_FAULT   0x2
+#define HW_MMU_ALL_INTERRUPTS      0x1F
+
+#define HW_MMU_COARSE_PAGE_SIZE 0x400
+
+/* hw_mmu_mixed_size_t:  Enumerated Type used to specify whether to follow
+			CPU/TLB Element size */
+enum hw_mmu_mixed_size_t {
+	HW_MMU_TLBES,
+	HW_MMU_CPUES
+};
+
+/* hw_mmu_map_attrs_t:  Struct containing MMU mapping attributes */
+struct hw_mmu_map_attrs_t {
+	enum hw_endianism_t endianism;
+	enum hw_element_size_t element_size;
+	enum hw_mmu_mixed_size_t mixed_size;
+	bool donotlockmpupage;
+};
+
+extern hw_status hw_mmu_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				       u32 num_locked_entries);
+
+extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				       u32 victim_entry_num);
+
+/* For MMU faults */
+extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+				  u32 irq_mask);
+
+extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+				      u32 irq_mask);
+
+extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+				     u32 irq_mask);
+
+extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+				     u32 *irq_mask);
+
+extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+					u32 *addr);
+
+/* Set the TT base address */
+extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+				u32 ttb_phys_addr);
+
+extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
+				  u32 virtual_addr, u32 page_sz);
+
+extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				u32 entry_num,
+				struct hw_mmu_map_attrs_t *map_attrs,
+				s8 preserved_bit, s8 valid_bit);
+
+/* For PTEs */
+extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				struct hw_mmu_map_attrs_t *map_attrs);
+
+extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
+				  u32 virtual_addr, u32 page_size);
+
+void hw_mmu_tlb_flush_all(const void __iomem *base);
+
+static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
+{
+	u32 pte_addr;
+	u32 va31_to20;
+
+	va31_to20 = va >> (20 - 2);	/* Left-shift by 2 here itself */
+	va31_to20 &= 0xFFFFFFFCUL;
+	pte_addr = l1_base + va31_to20;
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_addr_l2(u32 l2_base, u32 va)
+{
+	u32 pte_addr;
+
+	pte_addr = (l2_base & 0xFFFFFC00) | ((va >> 10) & 0x3FC);
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_coarse_l1(u32 pte_val)
+{
+	u32 pte_coarse;
+
+	pte_coarse = pte_val & 0xFFFFFC00;
+
+	return pte_coarse;
+}
+
+static inline u32 hw_mmu_pte_size_l1(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if ((pte_val & 0x3) == 0x1) {
+		/* Points to L2 PT */
+		pte_size = HW_MMU_COARSE_PAGE_SIZE;
+	}
+
+	if ((pte_val & 0x3) == 0x2) {
+		if (pte_val & (1 << 18))
+			pte_size = HW_PAGE_SIZE16MB;
+		else
+			pte_size = HW_PAGE_SIZE1MB;
+	}
+
+	return pte_size;
+}
+
+static inline u32 hw_mmu_pte_size_l2(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if (pte_val & 0x2)
+		pte_size = HW_PAGE_SIZE4KB;
+	else if (pte_val & 0x1)
+		pte_size = HW_PAGE_SIZE64KB;
+
+	return pte_size;
+}
+
+#endif /* _HW_MMU_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
new file mode 100644
index 00000000000..8efd1fba2f6
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
@@ -0,0 +1,181 @@
+/*
+ * _chnl_sm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private header file defining channel manager and channel objects for
+ * a shared memory channel driver.
+ *
+ * Shared between the modules implementing the shared memory channel class
+ * library.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _CHNL_SM_
+#define _CHNL_SM_
+
+#include <dspbridge/dspapi.h>
+#include <dspbridge/dspdefs.h>
+
+#include <dspbridge/list.h>
+#include <dspbridge/ntfy.h>
+
+/*
+ *  These target side symbols define the beginning and ending addresses
+ *  of shared memory buffer. They are defined in the *cfg.cmd file by
+ *  cdb code.
+ */
+#define CHNL_SHARED_BUFFER_BASE_SYM "_SHM_BEG"
+#define CHNL_SHARED_BUFFER_LIMIT_SYM "_SHM_END"
+#define BRIDGEINIT_BIOSGPTIMER "_BRIDGEINIT_BIOSGPTIMER"
+#define BRIDGEINIT_LOADMON_GPTIMER "_BRIDGEINIT_LOADMON_GPTIMER"
+
+#ifndef _CHNL_WORDSIZE
+#define _CHNL_WORDSIZE 4	/* default _CHNL_WORDSIZE is 2 bytes/word */
+#endif
+
+#define MAXOPPS 16
+
+/* Shared memory config options */
+#define SHM_CURROPP	0	/* Set current OPP in shm */
+#define SHM_OPPINFO	1	/* Set dsp voltage and freq table values */
+#define SHM_GETOPP	2	/* Get opp requested by DSP */
+
+struct opp_table_entry {
+	u32 voltage;
+	u32 frequency;
+	u32 min_freq;
+	u32 max_freq;
+};
+
+struct opp_struct {
+	u32 curr_opp_pt;
+	u32 num_opp_pts;
+	struct opp_table_entry opp_point[MAXOPPS];
+};
+
+/* Request to MPU */
+struct opp_rqst_struct {
+	u32 rqst_dsp_freq;
+	u32 rqst_opp_pt;
+};
+
+/* Info to MPU */
+struct load_mon_struct {
+	u32 curr_dsp_load;
+	u32 curr_dsp_freq;
+	u32 pred_dsp_load;
+	u32 pred_dsp_freq;
+};
+
+/* Structure in shared between DSP and PC for communication. */
+struct shm {
+	u32 dsp_free_mask;	/* Written by DSP, read by PC. */
+	u32 host_free_mask;	/* Written by PC, read by DSP */
+
+	u32 input_full;		/* Input channel has unread data. */
+	u32 input_id;		/* Channel for which input is available. */
+	u32 input_size;		/* Size of data block (in DSP words). */
+
+	u32 output_full;	/* Output channel has unread data. */
+	u32 output_id;		/* Channel for which output is available. */
+	u32 output_size;	/* Size of data block (in DSP words). */
+
+	u32 arg;		/* Arg for Issue/Reclaim (23 bits for 55x). */
+	u32 resvd;		/* Keep structure size even for 32-bit DSPs */
+
+	/* Operating Point structure */
+	struct opp_struct opp_table_struct;
+	/* Operating Point Request structure */
+	struct opp_rqst_struct opp_request;
+	/* load monitor information structure */
+	struct load_mon_struct load_mon_info;
+#ifdef CONFIG_TIDSPBRIDGE_WDT3
+	/* Flag for WDT enable/disable F/I clocks */
+	u32 wdt_setclocks;
+	u32 wdt_overflow;	/* WDT overflow time */
+	char dummy[176];	/* padding to 256 byte boundary */
+#else
+	char dummy[184];	/* padding to 256 byte boundary */
+#endif
+	u32 shm_dbg_var[64];	/* shared memory debug variables */
+};
+
+	/* Channel Manager: only one created per board: */
+struct chnl_mgr {
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+	struct io_mgr *hio_mgr;	/* IO manager */
+	/* Device this board represents */
+	struct dev_object *hdev_obj;
+
+	/* These fields initialized in bridge_chnl_create(): */
+	u32 dw_output_mask;	/* Host output channels w/ full buffers */
+	u32 dw_last_output;	/* Last output channel fired from DPC */
+	/* Critical section object handle */
+	spinlock_t chnl_mgr_lock;
+	u32 word_size;		/* Size in bytes of DSP word */
+	u8 max_channels;	/* Total number of channels */
+	u8 open_channels;	/* Total number of open channels */
+	struct chnl_object **ap_channel;	/* Array of channels */
+	u8 dw_type;		/* Type of channel class library */
+	/* If no shm syms, return for CHNL_Open */
+	int chnl_open_status;
+};
+
+/*
+ *  Channel: up to CHNL_MAXCHANNELS per board or if DSP-DMA supported then
+ *     up to CHNL_MAXCHANNELS + CHNL_MAXDDMACHNLS per board.
+ */
+struct chnl_object {
+	/* Pointer back to channel manager */
+	struct chnl_mgr *chnl_mgr_obj;
+	u32 chnl_id;		/* Channel id */
+	u8 dw_state;		/* Current channel state */
+	s8 chnl_mode;		/* Chnl mode and attributes */
+	/* Chnl I/O completion event (user mode) */
+	void *user_event;
+	/* Abstract syncronization object */
+	struct sync_object *sync_event;
+	u32 process;		/* Process which created this channel */
+	u32 pcb_arg;		/* Argument to use with callback */
+	struct lst_list *pio_requests;	/* List of IOR's to driver */
+	s32 cio_cs;		/* Number of IOC's in queue */
+	s32 cio_reqs;		/* Number of IORequests in queue */
+	s32 chnl_packets;	/* Initial number of free Irps */
+	/* List of IOC's from driver */
+	struct lst_list *pio_completions;
+	struct lst_list *free_packets_list;	/* List of free Irps */
+	struct ntfy_object *ntfy_obj;
+	u32 bytes_moved;	/* Total number of bytes transfered */
+
+	/* For DSP-DMA */
+
+	/* Type of chnl transport:CHNL_[PCPY][DDMA] */
+	u32 chnl_type;
+};
+
+/* I/O Request/completion packet: */
+struct chnl_irp {
+	struct list_head link;	/* Link to next CHIRP in queue. */
+	/* Buffer to be filled/emptied. (User) */
+	u8 *host_user_buf;
+	/* Buffer to be filled/emptied. (System) */
+	u8 *host_sys_buf;
+	u32 dw_arg;		/* Issue/Reclaim argument. */
+	u32 dsp_tx_addr;	/* Transfer address on DSP side. */
+	u32 byte_size;		/* Bytes transferred. */
+	u32 buf_size;		/* Actual buffer size when allocated. */
+	u32 status;		/* Status of IO completion. */
+};
+
+#endif /* _CHNL_SM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/brddefs.h b/drivers/staging/tidspbridge/include/dspbridge/brddefs.h
new file mode 100644
index 00000000000..f80d9a5f05a
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/brddefs.h
@@ -0,0 +1,39 @@
+/*
+ * brddefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global BRD constants and types, shared between DSP API and Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef BRDDEFS_
+#define BRDDEFS_
+
+/* platform status values */
+#define BRD_STOPPED     0x0	/* No Monitor Loaded, Not running. */
+#define BRD_IDLE        0x1	/* Monitor Loaded, but suspended. */
+#define BRD_RUNNING     0x2	/* Monitor loaded, and executing. */
+#define BRD_UNKNOWN     0x3	/* Board state is indeterminate. */
+#define BRD_SYNCINIT    0x4
+#define BRD_LOADED      0x5
+#define BRD_LASTSTATE   BRD_LOADED	/* Set to highest legal board state. */
+#define BRD_SLEEP_TRANSITION 0x6	/* Sleep transition in progress */
+#define BRD_HIBERNATION 0x7	/* MPU initiated hibernation */
+#define BRD_RETENTION     0x8	/* Retention mode */
+#define BRD_DSP_HIBERNATION     0x9	/* DSP initiated hibernation */
+#define BRD_ERROR		0xA	/* Board state is Error */
+
+/* BRD Object */
+struct brd_object;
+
+#endif /* BRDDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfg.h b/drivers/staging/tidspbridge/include/dspbridge/cfg.h
new file mode 100644
index 00000000000..05a8999070f
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/cfg.h
@@ -0,0 +1,222 @@
+/*
+ * cfg.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * PM Configuration module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CFG_
+#define CFG_
+#include <dspbridge/host_os.h>
+#include <dspbridge/cfgdefs.h>
+
+/*
+ *  ======== cfg_exit ========
+ *  Purpose:
+ *      Discontinue usage of the CFG module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      cfg_init(void) was previously called.
+ *  Ensures:
+ *      Resources acquired in cfg_init(void) are freed.
+ */
+extern void cfg_exit(void);
+
+/*
+ *  ======== cfg_get_auto_start ========
+ *  Purpose:
+ *      Retreive the autostart mask, if any, for this board.
+ *  Parameters:
+ *      dev_node_obj:  Handle to the dev_node who's driver we are querying.
+ *      auto_start:   Ptr to location for 32 bit autostart mask.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:  dev_node_obj is invalid.
+ *      -ENODATA: Unable to retreive resource.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:        *auto_start contains autostart mask for this devnode.
+ */
+extern int cfg_get_auto_start(struct cfg_devnode *dev_node_obj,
+				     u32 *auto_start);
+
+/*
+ *  ======== cfg_get_cd_version ========
+ *  Purpose:
+ *      Retrieves the version of the PM Class Driver.
+ *  Parameters:
+ *      version:    Ptr to u32 to contain version number upon return.
+ *  Returns:
+ *      0:    Success.  version contains Class Driver version in
+ *                  the form: 0xAABBCCDD where AABB is Major version and
+ *                  CCDD is Minor.
+ *      -EPERM:  Failure.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    Success.
+ *      else:       *version is NULL.
+ */
+extern int cfg_get_cd_version(u32 *version);
+
+/*
+ *  ======== cfg_get_dev_object ========
+ *  Purpose:
+ *      Retrieve the Device Object handle for a given devnode.
+ *  Parameters:
+ *      dev_node_obj:	Platform's dev_node handle from which to retrieve
+ *      		value.
+ *      value:          Ptr to location to store the value.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT: dev_node_obj is invalid or device_obj is invalid.
+ *      -ENODATA: The resource is not available.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    *value is set to the retrieved u32.
+ *      else:       *value is set to 0L.
+ */
+extern int cfg_get_dev_object(struct cfg_devnode *dev_node_obj,
+				     u32 *value);
+
+/*
+ *  ======== cfg_get_exec_file ========
+ *  Purpose:
+ *      Retreive the default executable, if any, for this board.
+ *  Parameters:
+ *      dev_node_obj: Handle to the dev_node who's driver we are querying.
+ *      buf_size:       Size of buffer.
+ *      str_exec_file:  Ptr to character buf to hold ExecFile.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:  dev_node_obj is invalid or str_exec_file is invalid.
+ *      -ENODATA: The resource is not available.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    Not more than buf_size bytes were copied into str_exec_file,
+ *                  and *str_exec_file contains default executable for this
+ *                  devnode.
+ */
+extern int cfg_get_exec_file(struct cfg_devnode *dev_node_obj,
+				    u32 buf_size, char *str_exec_file);
+
+/*
+ *  ======== cfg_get_object ========
+ *  Purpose:
+ *      Retrieve the Driver Object handle From the Registry
+ *  Parameters:
+ *      value:      Ptr to location to store the value.
+ *      dw_type      Type of Object to Get
+ *  Returns:
+ *      0:    Success.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    *value is set to the retrieved u32(non-Zero).
+ *      else:       *value is set to 0L.
+ */
+extern int cfg_get_object(u32 *value, u8 dw_type);
+
+/*
+ *  ======== cfg_get_perf_value ========
+ *  Purpose:
+ *      Retrieve a flag indicating whether PERF should log statistics for the
+ *      PM class driver.
+ *  Parameters:
+ *      enable_perf:    Location to store flag.  0 indicates the key was
+ *                      not found, or had a zero value.  A nonzero value
+ *                      means the key was found and had a nonzero value.
+ *  Returns:
+ *  Requires:
+ *      enable_perf != NULL;
+ *  Ensures:
+ */
+extern void cfg_get_perf_value(bool *enable_perf);
+
+/*
+ *  ======== cfg_get_zl_file ========
+ *  Purpose:
+ *      Retreive the ZLFile, if any, for this board.
+ *  Parameters:
+ *      dev_node_obj: Handle to the dev_node who's driver we are querying.
+ *      buf_size:       Size of buffer.
+ *      str_zl_file_name: Ptr to character buf to hold ZLFileName.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT: str_zl_file_name is invalid or dev_node_obj is invalid.
+ *      -ENODATA: couldn't find the ZLFileName.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    Not more than buf_size bytes were copied into
+ *                  str_zl_file_name, and *str_zl_file_name contains ZLFileName
+ *                  for this devnode.
+ */
+extern int cfg_get_zl_file(struct cfg_devnode *dev_node_obj,
+				  u32 buf_size, char *str_zl_file_name);
+
+/*
+ *  ======== cfg_init ========
+ *  Purpose:
+ *      Initialize the CFG module's private state.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      A requirement for each of the other public CFG functions.
+ */
+extern bool cfg_init(void);
+
+/*
+ *  ======== cfg_set_dev_object ========
+ *  Purpose:
+ *      Store the Device Object handle for a given devnode.
+ *  Parameters:
+ *      dev_node_obj:   Platform's dev_node handle we are storing value with.
+ *      value:    Arbitrary value to store.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:  dev_node_obj is invalid.
+ *      -EPERM:              Internal Error.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:    The Private u32 was successfully set.
+ */
+extern int cfg_set_dev_object(struct cfg_devnode *dev_node_obj,
+				     u32 value);
+
+/*
+ *  ======== CFG_SetDrvObject ========
+ *  Purpose:
+ *      Store the Driver Object handle.
+ *  Parameters:
+ *      value:          Arbitrary value to store.
+ *      dw_type          Type of Object to Store
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Internal Error.
+ *  Requires:
+ *      CFG initialized.
+ *  Ensures:
+ *      0:        The Private u32 was successfully set.
+ */
+extern int cfg_set_object(u32 value, u8 dw_type);
+
+#endif /* CFG_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
new file mode 100644
index 00000000000..38122dbf877
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
@@ -0,0 +1,81 @@
+/*
+ * cfgdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global CFG constants and types, shared between DSP API and Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CFGDEFS_
+#define CFGDEFS_
+
+/* Maximum length of module search path. */
+#define CFG_MAXSEARCHPATHLEN    255
+
+/* Maximum length of general paths. */
+#define CFG_MAXPATH             255
+
+/* Host Resources: */
+#define CFG_MAXMEMREGISTERS     9
+#define CFG_MAXIOPORTS          20
+#define CFG_MAXIRQS             7
+#define CFG_MAXDMACHANNELS      7
+
+/* IRQ flag */
+#define CFG_IRQSHARED           0x01	/* IRQ can be shared */
+
+/* DSP Resources: */
+#define CFG_DSPMAXMEMTYPES      10
+#define CFG_DEFAULT_NUM_WINDOWS 1	/* We support only one window. */
+
+/* A platform-related device handle: */
+struct cfg_devnode;
+
+/*
+ *  Host resource structure.
+ */
+struct cfg_hostres {
+	u32 num_mem_windows;	/* Set to default */
+	/* This is the base.memory */
+	u32 dw_mem_base[CFG_MAXMEMREGISTERS];	/* shm virtual address */
+	u32 dw_mem_length[CFG_MAXMEMREGISTERS];	/* Length of the Base */
+	u32 dw_mem_phys[CFG_MAXMEMREGISTERS];	/* shm Physical address */
+	u8 birq_registers;	/* IRQ Number */
+	u8 birq_attrib;		/* IRQ Attribute */
+	u32 dw_offset_for_monitor;	/* The Shared memory starts from
+					 * dw_mem_base + this offset */
+	/*
+	 *  Info needed by NODE for allocating channels to communicate with RMS:
+	 *      dw_chnl_offset:       Offset of RMS channels. Lower channels are
+	 *                          reserved.
+	 *      dw_chnl_buf_size:      Size of channel buffer to send to RMS
+	 *      dw_num_chnls:		Total number of channels
+	 *      			(including reserved).
+	 */
+	u32 dw_chnl_offset;
+	u32 dw_chnl_buf_size;
+	u32 dw_num_chnls;
+	void __iomem *dw_per_base;
+	u32 dw_per_pm_base;
+	u32 dw_core_pm_base;
+	void __iomem *dw_dmmu_base;
+	void __iomem *dw_sys_ctrl_base;
+};
+
+struct cfg_dspmemdesc {
+	u32 mem_type;		/* Type of memory. */
+	u32 ul_min;		/* Minimum amount of memory of this type. */
+	u32 ul_max;		/* Maximum amount of memory of this type. */
+};
+
+#endif /* CFGDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/chnl.h b/drivers/staging/tidspbridge/include/dspbridge/chnl.h
new file mode 100644
index 00000000000..8733b3b8193
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/chnl.h
@@ -0,0 +1,130 @@
+/*
+ * chnl.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP API channel interface: multiplexes data streams through the single
+ * physical link managed by a Bridge driver.
+ *
+ * See DSP API chnl.h for more details.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CHNL_
+#define CHNL_
+
+#include <dspbridge/chnlpriv.h>
+
+/*
+ *  ======== chnl_close ========
+ *  Purpose:
+ *      Ensures all pending I/O on this channel is cancelled, discards all
+ *      queued I/O completion notifications, then frees the resources allocated
+ *      for this channel, and makes the corresponding logical channel id
+ *      available for subsequent use.
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *  Returns:
+ *      0:        Success;
+ *      -EFAULT:    Invalid chnl_obj.
+ *  Requires:
+ *      chnl_init(void) called.
+ *      No thread must be blocked on this channel's I/O completion event.
+ *  Ensures:
+ *      0:        The I/O completion event for this channel is freed.
+ *                      chnl_obj is no longer valid.
+ */
+extern int chnl_close(struct chnl_object *chnl_obj);
+
+/*
+ *  ======== chnl_create ========
+ *  Purpose:
+ *      Create a channel manager object, responsible for opening new channels
+ *      and closing old ones for a given board.
+ *  Parameters:
+ *      channel_mgr:    Location to store a channel manager object on output.
+ *      hdev_obj:     Handle to a device object.
+ *      mgr_attrts:      Channel manager attributes.
+ *      mgr_attrts->max_channels:   Max channels
+ *      mgr_attrts->birq:        Channel's I/O IRQ number.
+ *      mgr_attrts->irq_shared:     TRUE if the IRQ is shareable.
+ *      mgr_attrts->word_size:   DSP Word size in equivalent PC bytes..
+ *  Returns:
+ *      0:                Success;
+ *      -EFAULT:            hdev_obj is invalid.
+ *      -EINVAL: max_channels is 0.
+ *               Invalid DSP word size (must be > 0).
+ *               Invalid base address for DSP communications.
+ *      -ENOMEM:            Insufficient memory for requested resources.
+ *      -EIO:             Unable to plug channel ISR for configured IRQ.
+ *      -ECHRNG:     This manager cannot handle this many channels.
+ *      -EEXIST:       Channel manager already exists for this device.
+ *  Requires:
+ *      chnl_init(void) called.
+ *      channel_mgr != NULL.
+ *      mgr_attrts != NULL.
+ *  Ensures:
+ *      0:                Subsequent calls to chnl_create() for the same
+ *                              board without an intervening call to
+ *                              chnl_destroy() will fail.
+ */
+extern int chnl_create(struct chnl_mgr **channel_mgr,
+			      struct dev_object *hdev_obj,
+			      const struct chnl_mgrattrs *mgr_attrts);
+
+/*
+ *  ======== chnl_destroy ========
+ *  Purpose:
+ *      Close all open channels, and destroy the channel manager.
+ *  Parameters:
+ *      hchnl_mgr:           Channel manager object.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        hchnl_mgr was invalid.
+ *  Requires:
+ *      chnl_init(void) called.
+ *  Ensures:
+ *      0:            Cancels I/O on each open channel.
+ *                          Closes each open channel.
+ *                          chnl_create may subsequently be called for the
+ *                          same board.
+ */
+extern int chnl_destroy(struct chnl_mgr *hchnl_mgr);
+
+/*
+ *  ======== chnl_exit ========
+ *  Purpose:
+ *      Discontinue usage of the CHNL module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      chnl_init(void) previously called.
+ *  Ensures:
+ *      Resources, if any acquired in chnl_init(void), are freed when the last
+ *      client of CHNL calls chnl_exit(void).
+ */
+extern void chnl_exit(void);
+
+/*
+ *  ======== chnl_init ========
+ *  Purpose:
+ *      Initialize the CHNL module's private state.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occurred.
+ *  Requires:
+ *  Ensures:
+ *      A requirement for each of the other public CHNL functions.
+ */
+extern bool chnl_init(void);
+
+#endif /* CHNL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/chnldefs.h b/drivers/staging/tidspbridge/include/dspbridge/chnldefs.h
new file mode 100644
index 00000000000..5bf5f6b0b7b
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/chnldefs.h
@@ -0,0 +1,66 @@
+/*
+ * chnldefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * System-wide channel objects and constants.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CHNLDEFS_
+#define CHNLDEFS_
+
+/* Channel id option. */
+#define CHNL_PICKFREE       (~0UL)	/* Let manager pick a free channel. */
+
+/* Channel manager limits: */
+#define CHNL_INITIOREQS      4	/* Default # of I/O requests. */
+
+/* Channel modes */
+#define CHNL_MODETODSP		0	/* Data streaming to the DSP. */
+#define CHNL_MODEFROMDSP	1	/* Data streaming from the DSP. */
+
+/* GetIOCompletion flags */
+#define CHNL_IOCINFINITE     0xffffffff	/* Wait forever for IO completion. */
+#define CHNL_IOCNOWAIT       0x0	/* Dequeue an IOC, if available. */
+
+/* IO Completion Record status: */
+#define CHNL_IOCSTATCOMPLETE 0x0000	/* IO Completed. */
+#define CHNL_IOCSTATCANCEL   0x0002	/* IO was cancelled */
+#define CHNL_IOCSTATTIMEOUT  0x0008	/* Wait for IOC timed out. */
+#define CHNL_IOCSTATEOS      0x8000	/* End Of Stream reached. */
+
+/* Macros for checking I/O Completion status: */
+#define CHNL_IS_IO_COMPLETE(ioc)  (!(ioc.status & ~CHNL_IOCSTATEOS))
+#define CHNL_IS_IO_CANCELLED(ioc) (ioc.status & CHNL_IOCSTATCANCEL)
+#define CHNL_IS_TIMED_OUT(ioc)    (ioc.status & CHNL_IOCSTATTIMEOUT)
+
+/* Channel attributes: */
+struct chnl_attr {
+	u32 uio_reqs;		/* Max # of preallocated I/O requests. */
+	void *event_obj;	/* User supplied auto-reset event object. */
+	char *pstr_event_name;	/* Ptr to name of user event object. */
+	void *reserved1;	/* Reserved for future use. */
+	u32 reserved2;		/* Reserved for future use. */
+
+};
+
+/* I/O completion record: */
+struct chnl_ioc {
+	void *pbuf;		/* Buffer to be filled/emptied. */
+	u32 byte_size;		/* Bytes transferred. */
+	u32 buf_size;		/* Actual buffer size in bytes */
+	u32 status;		/* Status of IO completion. */
+	u32 dw_arg;		/* User argument associated with pbuf. */
+};
+
+#endif /* CHNLDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/chnlpriv.h b/drivers/staging/tidspbridge/include/dspbridge/chnlpriv.h
new file mode 100644
index 00000000000..9292100b1c0
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/chnlpriv.h
@@ -0,0 +1,98 @@
+/*
+ * chnlpriv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private channel header shared between DSPSYS, DSPAPI and
+ * Bridge driver modules.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CHNLPRIV_
+#define CHNLPRIV_
+
+#include <dspbridge/chnldefs.h>
+#include <dspbridge/devdefs.h>
+#include <dspbridge/sync.h>
+
+/* Channel manager limits: */
+#define CHNL_MAXCHANNELS    32	/* Max channels available per transport */
+
+/*
+ *  Trans port channel Id definitions:(must match dsp-side).
+ *
+ *  For CHNL_MAXCHANNELS = 16:
+ *
+ *  ChnlIds:
+ *      0-15  (PCPY) - transport 0)
+ *      16-31 (DDMA) - transport 1)
+ *      32-47 (ZCPY) - transport 2)
+ */
+#define CHNL_PCPY       0	/* Proc-copy transport 0 */
+
+#define CHNL_MAXIRQ     0xff	/* Arbitrarily large number. */
+
+/* The following modes are private: */
+#define CHNL_MODEUSEREVENT  0x1000	/* User provided the channel event. */
+#define CHNL_MODEMASK       0x1001
+
+/* Higher level channel states: */
+#define CHNL_STATEREADY		0	/* Channel ready for I/O. */
+#define CHNL_STATECANCEL	1	/* I/O was cancelled. */
+#define CHNL_STATEEOS		2	/* End Of Stream reached. */
+
+/* Macros for checking mode: */
+#define CHNL_IS_INPUT(mode)      (mode & CHNL_MODEFROMDSP)
+#define CHNL_IS_OUTPUT(mode)     (!CHNL_IS_INPUT(mode))
+
+/* Types of channel class libraries: */
+#define CHNL_TYPESM         1	/* Shared memory driver. */
+#define CHNL_TYPEBM         2	/* Bus Mastering driver. */
+
+/* Max string length of channel I/O completion event name - change if needed */
+#define CHNL_MAXEVTNAMELEN  32
+
+/* Max memory pages lockable in CHNL_PrepareBuffer() - change if needed */
+#define CHNL_MAXLOCKPAGES   64
+
+/* Channel info. */
+struct chnl_info {
+	struct chnl_mgr *hchnl_mgr;	/* Owning channel manager. */
+	u32 cnhl_id;		/* Channel ID. */
+	void *event_obj;	/* Channel I/O completion event. */
+	/*Abstraction of I/O completion event. */
+	struct sync_object *sync_event;
+	s8 dw_mode;		/* Channel mode. */
+	u8 dw_state;		/* Current channel state. */
+	u32 bytes_tx;		/* Total bytes transferred. */
+	u32 cio_cs;		/* Number of IOCs in queue. */
+	u32 cio_reqs;		/* Number of IO Requests in queue. */
+	u32 process;		/* Process owning this channel. */
+};
+
+/* Channel manager info: */
+struct chnl_mgrinfo {
+	u8 dw_type;		/* Type of channel class library. */
+	/* Channel handle, given the channel id. */
+	struct chnl_object *chnl_obj;
+	u8 open_channels;	/* Number of open channels. */
+	u8 max_channels;	/* total # of chnls supported */
+};
+
+/* Channel Manager Attrs: */
+struct chnl_mgrattrs {
+	/* Max number of channels this manager can use. */
+	u8 max_channels;
+	u32 word_size;		/* DSP Word size. */
+};
+
+#endif /* CHNLPRIV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/clk.h b/drivers/staging/tidspbridge/include/dspbridge/clk.h
new file mode 100644
index 00000000000..b2395032342
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/clk.h
@@ -0,0 +1,101 @@
+/*
+ * clk.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Provides Clock functions.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _CLK_H
+#define _CLK_H
+
+enum dsp_clk_id {
+	DSP_CLK_IVA2 = 0,
+	DSP_CLK_GPT5,
+	DSP_CLK_GPT6,
+	DSP_CLK_GPT7,
+	DSP_CLK_GPT8,
+	DSP_CLK_WDT3,
+	DSP_CLK_MCBSP1,
+	DSP_CLK_MCBSP2,
+	DSP_CLK_MCBSP3,
+	DSP_CLK_MCBSP4,
+	DSP_CLK_MCBSP5,
+	DSP_CLK_SSI,
+	DSP_CLK_NOT_DEFINED
+};
+
+/*
+ *  ======== dsp_clk_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      CLK initialized.
+ *  Ensures:
+ *      Resources used by module are freed when cRef reaches zero.
+ */
+extern void dsp_clk_exit(void);
+
+/*
+ *  ======== dsp_clk_init ========
+ *  Purpose:
+ *      Initializes private state of CLK module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      CLK initialized.
+ */
+extern void dsp_clk_init(void);
+
+void dsp_gpt_wait_overflow(short int clk_id, unsigned int load);
+
+/*
+ *  ======== dsp_clk_enable ========
+ *  Purpose:
+ *      Enables the clock requested.
+ *  Parameters:
+ *  Returns:
+ *      0:	Success.
+ *	-EPERM:	Error occured while enabling the clock.
+ *  Requires:
+ *  Ensures:
+ */
+extern int dsp_clk_enable(enum dsp_clk_id clk_id);
+
+u32 dsp_clock_enable_all(u32 dsp_per_clocks);
+
+/*
+ *  ======== dsp_clk_disable ========
+ *  Purpose:
+ *      Disables the clock requested.
+ *  Parameters:
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Error occured while disabling the clock.
+ *  Requires:
+ *  Ensures:
+ */
+extern int dsp_clk_disable(enum dsp_clk_id clk_id);
+
+extern u32 dsp_clk_get_iva2_rate(void);
+
+u32 dsp_clock_disable_all(u32 dsp_per_clocks);
+
+extern void ssi_clk_prepare(bool FLAG);
+
+#endif /* _SYNC_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cmm.h b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
new file mode 100644
index 00000000000..a921f1b6ee7
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
@@ -0,0 +1,386 @@
+/*
+ * cmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Communication Memory Management(CMM) module provides shared memory
+ * management services for DSP/BIOS Bridge data streaming and messaging.
+ * Multiple shared memory segments can be registered with CMM. Memory is
+ * coelesced back to the appropriate pool when a buffer is freed.
+ *
+ * The CMM_Xlator[xxx] functions are used for node messaging and data
+ * streaming address translation to perform zero-copy inter-processor
+ * data transfer(GPP<->DSP). A "translator" object is created for a node or
+ * stream object that contains per thread virtual address information. This
+ * translator info is used at runtime to perform SM address translation
+ * to/from the DSP address space.
+ *
+ * Notes:
+ *   cmm_xlator_alloc_buf - Used by Node and Stream modules for SM address
+ *			  translation.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CMM_
+#define CMM_
+
+#include <dspbridge/devdefs.h>
+
+#include <dspbridge/cmmdefs.h>
+#include <dspbridge/host_os.h>
+
+/*
+ *  ======== cmm_calloc_buf ========
+ *  Purpose:
+ *      Allocate memory buffers that can be used for data streaming or
+ *      messaging.
+ *  Parameters:
+ *      hcmm_mgr:   Cmm Mgr handle.
+ *      usize:     Number of bytes to allocate.
+ *      pattr:     Attributes of memory to allocate.
+ *      pp_buf_va:   Address of where to place VA.
+ *  Returns:
+ *      Pointer to a zero'd block of SM memory;
+ *      NULL if memory couldn't be allocated,
+ *      or if byte_size == 0,
+ *  Requires:
+ *      Valid hcmm_mgr.
+ *      CMM initialized.
+ *  Ensures:
+ *      The returned pointer, if not NULL, points to a valid memory block of
+ *      the size requested.
+ *
+ */
+extern void *cmm_calloc_buf(struct cmm_object *hcmm_mgr,
+			    u32 usize, struct cmm_attrs *pattrs,
+			    void **pp_buf_va);
+
+/*
+ *  ======== cmm_create ========
+ *  Purpose:
+ *      Create a communication memory manager object.
+ *  Parameters:
+ *      ph_cmm_mgr:	Location to store a communication manager handle on
+ *      		output.
+ *      hdev_obj: Handle to a device object.
+ *      mgr_attrts: Comm mem manager attributes.
+ *  Returns:
+ *      0:        Success;
+ *      -ENOMEM:    Insufficient memory for requested resources.
+ *      -EPERM:      Failed to initialize critical sect sync object.
+ *
+ *  Requires:
+ *      cmm_init(void) called.
+ *      ph_cmm_mgr != NULL.
+ *      mgr_attrts->ul_min_block_size >= 4 bytes.
+ *  Ensures:
+ *
+ */
+extern int cmm_create(struct cmm_object **ph_cmm_mgr,
+			     struct dev_object *hdev_obj,
+			     const struct cmm_mgrattrs *mgr_attrts);
+
+/*
+ *  ======== cmm_destroy ========
+ *  Purpose:
+ *      Destroy the communication memory manager object.
+ *  Parameters:
+ *      hcmm_mgr:   Cmm Mgr handle.
+ *      force:     Force deallocation of all cmm memory immediately if set TRUE.
+ *                 If FALSE, and outstanding allocations will return -EPERM
+ *                 status.
+ *  Returns:
+ *      0:        CMM object & resources deleted.
+ *      -EPERM:      Unable to free CMM object due to outstanding allocation.
+ *      -EFAULT:    Unable to free CMM due to bad handle.
+ *  Requires:
+ *      CMM is initialized.
+ *      hcmm_mgr != NULL.
+ *  Ensures:
+ *      Memory resources used by Cmm Mgr are freed.
+ */
+extern int cmm_destroy(struct cmm_object *hcmm_mgr, bool force);
+
+/*
+ *  ======== cmm_exit ========
+ *  Purpose:
+ *     Discontinue usage of module. Cleanup CMM module if CMM cRef reaches zero.
+ *  Parameters:
+ *     n/a
+ *  Returns:
+ *     n/a
+ *  Requires:
+ *     CMM is initialized.
+ *  Ensures:
+ */
+extern void cmm_exit(void);
+
+/*
+ *  ======== cmm_free_buf ========
+ *  Purpose:
+ *      Free the given buffer.
+ *  Parameters:
+ *      hcmm_mgr:    Cmm Mgr handle.
+ *      pbuf:       Pointer to memory allocated by cmm_calloc_buf().
+ *      ul_seg_id:    SM segment Id used in CMM_Calloc() attrs.
+ *                  Set to 0 to use default segment.
+ *  Returns:
+ *      0
+ *      -EPERM
+ *  Requires:
+ *      CMM initialized.
+ *      buf_pa != NULL
+ *  Ensures:
+ *
+ */
+extern int cmm_free_buf(struct cmm_object *hcmm_mgr,
+			       void *buf_pa, u32 ul_seg_id);
+
+/*
+ *  ======== cmm_get_handle ========
+ *  Purpose:
+ *      Return the handle to the cmm mgr for the given device obj.
+ *  Parameters:
+ *      hprocessor:   Handle to a Processor.
+ *      ph_cmm_mgr:	Location to store the shared memory mgr handle on
+ *      		output.
+ *
+ *  Returns:
+ *      0:        Cmm Mgr opaque handle returned.
+ *      -EFAULT:    Invalid handle.
+ *  Requires:
+ *      ph_cmm_mgr != NULL
+ *      hdev_obj != NULL
+ *  Ensures:
+ */
+extern int cmm_get_handle(void *hprocessor,
+				 struct cmm_object **ph_cmm_mgr);
+
+/*
+ *  ======== cmm_get_info ========
+ *  Purpose:
+ *      Return the current SM and VM utilization information.
+ *  Parameters:
+ *      hcmm_mgr:     Handle to a Cmm Mgr.
+ *      cmm_info_obj:    Location to store the Cmm information on output.
+ *
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid handle.
+ *      -EINVAL Invalid input argument.
+ *  Requires:
+ *  Ensures:
+ *
+ */
+extern int cmm_get_info(struct cmm_object *hcmm_mgr,
+			       struct cmm_info *cmm_info_obj);
+
+/*
+ *  ======== cmm_init ========
+ *  Purpose:
+ *      Initializes private state of CMM module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      CMM initialized.
+ */
+extern bool cmm_init(void);
+
+/*
+ *  ======== cmm_register_gppsm_seg ========
+ *  Purpose:
+ *      Register a block of SM with the CMM.
+ *  Parameters:
+ *      hcmm_mgr:         Handle to a Cmm Mgr.
+ *      lpGPPBasePA:     GPP Base Physical address.
+ *      ul_size:          Size in GPP bytes.
+ *      dsp_addr_offset  GPP PA to DSP PA Offset.
+ *      c_factor:         Add offset if CMM_ADDTODSPPA, sub if CMM_SUBFROMDSPPA.
+ *      dw_dsp_base:       DSP virtual base byte address.
+ *      ul_dsp_size:       Size of DSP segment in bytes.
+ *      sgmt_id:         Address to store segment Id.
+ *
+ *  Returns:
+ *      0:         Success.
+ *      -EFAULT:     Invalid hcmm_mgr handle.
+ *      -EINVAL: Invalid input argument.
+ *      -EPERM:       Unable to register.
+ *      - On success *sgmt_id is a valid SM segment ID.
+ *  Requires:
+ *      ul_size > 0
+ *      sgmt_id != NULL
+ *      dw_gpp_base_pa != 0
+ *      c_factor = CMM_ADDTODSPPA || c_factor = CMM_SUBFROMDSPPA
+ *  Ensures:
+ *
+ */
+extern int cmm_register_gppsm_seg(struct cmm_object *hcmm_mgr,
+					 unsigned int dw_gpp_base_pa,
+					 u32 ul_size,
+					 u32 dsp_addr_offset,
+					 s8 c_factor,
+					 unsigned int dw_dsp_base,
+					 u32 ul_dsp_size,
+					 u32 *sgmt_id, u32 gpp_base_va);
+
+/*
+ *  ======== cmm_un_register_gppsm_seg ========
+ *  Purpose:
+ *      Unregister the given memory segment that was previously registered
+ *      by cmm_register_gppsm_seg.
+ *  Parameters:
+ *      hcmm_mgr:    Handle to a Cmm Mgr.
+ *      ul_seg_id     Segment identifier returned by cmm_register_gppsm_seg.
+ *  Returns:
+ *       0:         Success.
+ *       -EFAULT:     Invalid handle.
+ *       -EINVAL: Invalid ul_seg_id.
+ *       -EPERM:       Unable to unregister for unknown reason.
+ *  Requires:
+ *  Ensures:
+ *
+ */
+extern int cmm_un_register_gppsm_seg(struct cmm_object *hcmm_mgr,
+					    u32 ul_seg_id);
+
+/*
+ *  ======== cmm_xlator_alloc_buf ========
+ *  Purpose:
+ *      Allocate the specified SM buffer and create a local memory descriptor.
+ *      Place on the descriptor on the translator's HaQ (Host Alloc'd Queue).
+ *  Parameters:
+ *      xlator:    Handle to a Xlator object.
+ *      va_buf:     Virtual address ptr(client context)
+ *      pa_size:    Size of SM memory to allocate.
+ *  Returns:
+ *      Ptr to valid physical address(Pa) of pa_size bytes, NULL if failed.
+ *  Requires:
+ *      va_buf != 0.
+ *      pa_size != 0.
+ *  Ensures:
+ *
+ */
+extern void *cmm_xlator_alloc_buf(struct cmm_xlatorobject *xlator,
+				  void *va_buf, u32 pa_size);
+
+/*
+ *  ======== cmm_xlator_create ========
+ *  Purpose:
+ *     Create a translator(xlator) object used for process specific Va<->Pa
+ *     address translation. Node messaging and streams use this to perform
+ *     inter-processor(GPP<->DSP) zero-copy data transfer.
+ *  Parameters:
+ *     xlator:         Address to place handle to a new Xlator handle.
+ *     hcmm_mgr:        Handle to Cmm Mgr associated with this translator.
+ *     xlator_attrs:   Translator attributes used for the client NODE or STREAM.
+ *  Returns:
+ *     0:            Success.
+ *     -EINVAL:    Bad input Attrs.
+ *     -ENOMEM:   Insufficient memory(local) for requested resources.
+ *  Requires:
+ *     xlator != NULL
+ *     hcmm_mgr != NULL
+ *     xlator_attrs != NULL
+ *  Ensures:
+ *
+ */
+extern int cmm_xlator_create(struct cmm_xlatorobject **xlator,
+				    struct cmm_object *hcmm_mgr,
+				    struct cmm_xlatorattrs *xlator_attrs);
+
+/*
+ *  ======== cmm_xlator_delete ========
+ *  Purpose:
+ *      Delete translator resources
+ *  Parameters:
+ *      xlator:    handle to translator.
+ *      force:     force = TRUE will free XLators SM buffers/dscriptrs.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Bad translator handle.
+ *      -EPERM:      Unable to free translator resources.
+ *  Requires:
+ *      refs > 0
+ *  Ensures:
+ *
+ */
+extern int cmm_xlator_delete(struct cmm_xlatorobject *xlator,
+				    bool force);
+
+/*
+ *  ======== cmm_xlator_free_buf ========
+ *  Purpose:
+ *      Free SM buffer and descriptor.
+ *      Does not free client process VM.
+ *  Parameters:
+ *      xlator:    handle to translator.
+ *      buf_va      Virtual address of PA to free.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Bad translator handle.
+ *  Requires:
+ *  Ensures:
+ *
+ */
+extern int cmm_xlator_free_buf(struct cmm_xlatorobject *xlator,
+				      void *buf_va);
+
+/*
+ *  ======== cmm_xlator_info ========
+ *  Purpose:
+ *      Set/Get process specific "translator" address info.
+ *      This is used to perform fast virtaul address translation
+ *      for shared memory buffers between the GPP and DSP.
+ *  Parameters:
+ *     xlator:     handle to translator.
+ *     paddr:       Virtual base address of segment.
+ *     ul_size:      Size in bytes.
+ *     segm_id:     Segment identifier of SM segment(s)
+ *     set_info     Set xlator fields if TRUE, else return base addr
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Bad translator handle.
+ *  Requires:
+ *      (refs > 0)
+ *      (paddr != NULL)
+ *      (ul_size > 0)
+ *  Ensures:
+ *
+ */
+extern int cmm_xlator_info(struct cmm_xlatorobject *xlator,
+				  u8 **paddr,
+				  u32 ul_size, u32 segm_id, bool set_info);
+
+/*
+ *  ======== cmm_xlator_translate ========
+ *  Purpose:
+ *      Perform address translation VA<->PA for the specified stream or
+ *      message shared memory buffer.
+ *  Parameters:
+ *     xlator: handle to translator.
+ *     paddr    address of buffer to translate.
+ *     xtype    Type of address xlation. CMM_PA2VA or CMM_VA2PA.
+ *  Returns:
+ *     Valid address on success, else NULL.
+ *  Requires:
+ *      refs > 0
+ *      paddr != NULL
+ *      xtype >= CMM_VA2PA) && (xtype <= CMM_DSPPA2PA)
+ *  Ensures:
+ *
+ */
+extern void *cmm_xlator_translate(struct cmm_xlatorobject *xlator,
+				  void *paddr, enum cmm_xlatetype xtype);
+
+#endif /* CMM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cmmdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cmmdefs.h
new file mode 100644
index 00000000000..fbff372d2f5
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/cmmdefs.h
@@ -0,0 +1,105 @@
+/*
+ * cmmdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global MEM constants and types.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CMMDEFS_
+#define CMMDEFS_
+
+#include <dspbridge/list.h>
+
+/* Cmm attributes used in cmm_create() */
+struct cmm_mgrattrs {
+	/* Minimum SM allocation; default 32 bytes. */
+	u32 ul_min_block_size;
+};
+
+/* Attributes for CMM_AllocBuf() & CMM_AllocDesc() */
+struct cmm_attrs {
+	u32 ul_seg_id;		/*  1,2... are SM segments. 0 is not. */
+	u32 ul_alignment;	/*  0,1,2,4....ul_min_block_size */
+};
+
+/*
+ *  DSPPa to GPPPa Conversion Factor.
+ *
+ *  For typical platforms:
+ *      converted Address = PaDSP + ( c_factor * addressToConvert).
+ */
+#define CMM_SUBFROMDSPPA	-1
+#define CMM_ADDTODSPPA		1
+
+#define CMM_ALLSEGMENTS         0xFFFFFF	/* All SegIds */
+#define CMM_MAXGPPSEGS          1	/* Maximum # of SM segs */
+
+/*
+ *  SMSEGs are SM segments the DSP allocates from.
+ *
+ *  This info is used by the GPP to xlate DSP allocated PAs.
+ */
+
+struct cmm_seginfo {
+	u32 dw_seg_base_pa;	/* Start Phys address of SM segment */
+	/* Total size in bytes of segment: DSP+GPP */
+	u32 ul_total_seg_size;
+	u32 dw_gpp_base_pa;	/* Start Phys addr of Gpp SM seg */
+	u32 ul_gpp_size;	/* Size of Gpp SM seg in bytes */
+	u32 dw_dsp_base_va;	/* DSP virt base byte address */
+	u32 ul_dsp_size;	/* DSP seg size in bytes */
+	/* # of current GPP allocations from this segment */
+	u32 ul_in_use_cnt;
+	u32 dw_seg_base_va;	/* Start Virt address of SM seg */
+
+};
+
+/* CMM useful information */
+struct cmm_info {
+	/* # of SM segments registered with this Cmm. */
+	u32 ul_num_gppsm_segs;
+	/* Total # of allocations outstanding for CMM */
+	u32 ul_total_in_use_cnt;
+	/* Min SM block size allocation from cmm_create() */
+	u32 ul_min_block_size;
+	/* Info per registered SM segment. */
+	struct cmm_seginfo seg_info[CMM_MAXGPPSEGS];
+};
+
+/* XlatorCreate attributes */
+struct cmm_xlatorattrs {
+	u32 ul_seg_id;		/* segment Id used for SM allocations */
+	u32 dw_dsp_bufs;	/* # of DSP-side bufs */
+	u32 dw_dsp_buf_size;	/* size of DSP-side bufs in GPP bytes */
+	/* Vm base address alloc'd in client process context */
+	void *vm_base;
+	/* dw_vm_size must be >= (dwMaxNumBufs * dwMaxSize) */
+	u32 dw_vm_size;
+};
+
+/*
+ * Cmm translation types. Use to map SM addresses to process context.
+ */
+enum cmm_xlatetype {
+	CMM_VA2PA = 0,		/* Virtual to GPP physical address xlation */
+	CMM_PA2VA = 1,		/* GPP Physical to virtual */
+	CMM_VA2DSPPA = 2,	/* Va to DSP Pa */
+	CMM_PA2DSPPA = 3,	/* GPP Pa to DSP Pa */
+	CMM_DSPPA2PA = 4,	/* DSP Pa to GPP Pa */
+};
+
+struct cmm_object;
+struct cmm_xlatorobject;
+
+#endif /* CMMDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cod.h b/drivers/staging/tidspbridge/include/dspbridge/cod.h
new file mode 100644
index 00000000000..42bce2eec80
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/cod.h
@@ -0,0 +1,369 @@
+/*
+ * cod.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Code management module for DSPs. This module provides an interface
+ * interface for loading both static and dynamic code objects onto DSP
+ * systems.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef COD_
+#define COD_
+
+#include <dspbridge/dblldefs.h>
+
+#define COD_MAXPATHLENGTH       255
+#define COD_TRACEBEG            "SYS_PUTCBEG"
+#define COD_TRACEEND            "SYS_PUTCEND"
+#define COD_TRACECURPOS	"BRIDGE_SYS_PUTC_current"
+#define COD_TRACESECT           "trace"
+#define COD_TRACEBEGOLD         "PUTCBEG"
+#define COD_TRACEENDOLD         "PUTCEND"
+
+#define COD_NOLOAD              DBLL_NOLOAD
+#define COD_SYMB                DBLL_SYMB
+
+/* COD code manager handle */
+struct cod_manager;
+
+/* COD library handle */
+struct cod_libraryobj;
+
+/* COD attributes */
+struct cod_attrs {
+	u32 ul_reserved;
+};
+
+/*
+ *  Function prototypes for writing memory to a DSP system, allocating
+ *  and freeing DSP memory.
+ */
+typedef u32(*cod_writefxn) (void *priv_ref, u32 dsp_add,
+			    void *pbuf, u32 ul_num_bytes, u32 mem_space);
+
+/*
+ *  ======== cod_close ========
+ *  Purpose:
+ *      Close a library opened with cod_open().
+ *  Parameters:
+ *      lib             - Library handle returned by cod_open().
+ *  Returns:
+ *      None.
+ *  Requires:
+ *      COD module initialized.
+ *      valid lib.
+ *  Ensures:
+ *
+ */
+extern void cod_close(struct cod_libraryobj *lib);
+
+/*
+ *  ======== cod_create ========
+ *  Purpose:
+ *      Create an object to manage code on a DSP system. This object can be
+ *      used to load an initial program image with arguments that can later
+ *      be expanded with dynamically loaded object files.
+ *      Symbol table information is managed by this object and can be retrieved
+ *      using the cod_get_sym_value() function.
+ *  Parameters:
+ *      manager:        created manager object
+ *      str_zl_file:    ZL DLL filename, of length < COD_MAXPATHLENGTH.
+ *      attrs:          attributes to be used by this object. A NULL value
+ *                      will cause default attrs to be used.
+ *  Returns:
+ *      0:                Success.
+ *      -ESPIPE:   ZL_Create failed.
+ *      -ENOSYS:           attrs was not NULL.  We don't yet support
+ *                              non default values of attrs.
+ *  Requires:
+ *      COD module initialized.
+ *      str_zl_file != NULL
+ *  Ensures:
+ */
+extern int cod_create(struct cod_manager **mgr,
+			     char *str_zl_file,
+			     const struct cod_attrs *attrs);
+
+/*
+ *  ======== cod_delete ========
+ *  Purpose:
+ *      Delete a code manager object.
+ *  Parameters:
+ *      cod_mgr_obj:   handle of manager to be deleted
+ *  Returns:
+ *      None.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *  Ensures:
+ */
+extern void cod_delete(struct cod_manager *cod_mgr_obj);
+
+/*
+ *  ======== cod_exit ========
+ *  Purpose:
+ *      Discontinue usage of the COD module.
+ *  Parameters:
+ *      None.
+ *  Returns:
+ *      None.
+ *  Requires:
+ *      COD initialized.
+ *  Ensures:
+ *      Resources acquired in cod_init(void) are freed.
+ */
+extern void cod_exit(void);
+
+/*
+ *  ======== cod_get_base_lib ========
+ *  Purpose:
+ *      Get handle to the base image DBL library.
+ *  Parameters:
+ *      cod_mgr_obj:   handle of manager to be deleted
+ *      plib:       location to store library handle on output.
+ *  Returns:
+ *      0:    Success.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      plib != NULL.
+ *  Ensures:
+ */
+extern int cod_get_base_lib(struct cod_manager *cod_mgr_obj,
+				   struct dbll_library_obj **plib);
+
+/*
+ *  ======== cod_get_base_name ========
+ *  Purpose:
+ *      Get the name of the base image DBL library.
+ *  Parameters:
+ *      cod_mgr_obj:   handle of manager to be deleted
+ *      sz_name:    location to store library name on output.
+ *      usize:       size of name buffer.
+ *  Returns:
+ *      0:    Success.
+ *      -EPERM:  Buffer too small.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      sz_name != NULL.
+ *  Ensures:
+ */
+extern int cod_get_base_name(struct cod_manager *cod_mgr_obj,
+				    char *sz_name, u32 usize);
+
+/*
+ *  ======== cod_get_entry ========
+ *  Purpose:
+ *      Retrieve the entry point of a loaded DSP program image
+ *  Parameters:
+ *      cod_mgr_obj:   handle of manager to be deleted
+ *      entry_pt:   pointer to location for entry point
+ *  Returns:
+ *      0:       Success.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      entry_pt != NULL.
+ *  Ensures:
+ */
+extern int cod_get_entry(struct cod_manager *cod_mgr_obj,
+				u32 *entry_pt);
+
+/*
+ *  ======== cod_get_loader ========
+ *  Purpose:
+ *      Get handle to the DBL loader.
+ *  Parameters:
+ *      cod_mgr_obj:   handle of manager to be deleted
+ *      loader:     location to store loader handle on output.
+ *  Returns:
+ *      0:    Success.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      loader != NULL.
+ *  Ensures:
+ */
+extern int cod_get_loader(struct cod_manager *cod_mgr_obj,
+				 struct dbll_tar_obj **loader);
+
+/*
+ *  ======== cod_get_section ========
+ *  Purpose:
+ *      Retrieve the starting address and length of a section in the COFF file
+ *      given the section name.
+ *  Parameters:
+ *      lib         Library handle returned from cod_open().
+ *      str_sect:   name of the section, with or without leading "."
+ *      addr:       Location to store address.
+ *      len:        Location to store length.
+ *  Returns:
+ *      0:                Success
+ *      -ESPIPE:  Symbols could not be found or have not been loaded onto
+ *                the board.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      str_sect != NULL;
+ *      addr != NULL;
+ *      len != NULL;
+ *  Ensures:
+ *      0:  *addr and *len contain the address and length of the
+ *                 section.
+ *      else:  *addr == 0 and *len == 0;
+ *
+ */
+extern int cod_get_section(struct cod_libraryobj *lib,
+				  char *str_sect,
+				  u32 *addr, u32 *len);
+
+/*
+ *  ======== cod_get_sym_value ========
+ *  Purpose:
+ *      Retrieve the value for the specified symbol. The symbol is first
+ *      searched for literally and then, if not found, searched for as a
+ *      C symbol.
+ *  Parameters:
+ *      lib:        library handle returned from cod_open().
+ *      pstrSymbol: name of the symbol
+ *      value:      value of the symbol
+ *  Returns:
+ *      0:                Success.
+ *      -ESPIPE:  Symbols could not be found or have not been loaded onto
+ *                the board.
+ *  Requires:
+ *      COD module initialized.
+ *      Valid cod_mgr_obj.
+ *      str_sym != NULL.
+ *      pul_value != NULL.
+ *  Ensures:
+ */
+extern int cod_get_sym_value(struct cod_manager *cod_mgr_obj,
+				    char *str_sym, u32 * pul_value);
+
+/*
+ *  ======== cod_init ========
+ *  Purpose:
+ *      Initialize the COD module's private state.
+ *  Parameters:
+ *      None.
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      A requirement for each of the other public COD functions.
+ */
+extern bool cod_init(void);
+
+/*
+ *  ======== cod_load_base ========
+ *  Purpose:
+ *      Load the initial program image, optionally with command-line arguments,
+ *      on the DSP system managed by the supplied handle. The program to be
+ *      loaded must be the first element of the args array and must be a fully
+ *      qualified pathname.
+ *  Parameters:
+ *      hmgr:       manager to load the code with
+ *      num_argc:   number of arguments in the args array
+ *      args:       array of strings for arguments to DSP program
+ *      write_fxn:   board-specific function to write data to DSP system
+ *      arb:       arbitrary pointer to be passed as first arg to write_fxn
+ *      envp:       array of environment strings for DSP exec.
+ *  Returns:
+ *      0:                   Success.
+ *      -EBADF:       Failed to open target code.
+ *  Requires:
+ *      COD module initialized.
+ *      hmgr is valid.
+ *      num_argc > 0.
+ *      args != NULL.
+ *      args[0] != NULL.
+ *      pfn_write != NULL.
+ *  Ensures:
+ */
+extern int cod_load_base(struct cod_manager *cod_mgr_obj,
+				u32 num_argc, char *args[],
+				cod_writefxn pfn_write, void *arb,
+				char *envp[]);
+
+/*
+ *  ======== cod_open ========
+ *  Purpose:
+ *      Open a library for reading sections. Does not load or set the base.
+ *  Parameters:
+ *      hmgr:           manager to load the code with
+ *      sz_coff_path:   Coff file to open.
+ *      flags:          COD_NOLOAD (don't load symbols) or COD_SYMB (load
+ *                      symbols).
+ *      lib_obj:        Handle returned that can be used in calls to cod_close
+ *                      and cod_get_section.
+ *  Returns:
+ *      S_OK:                   Success.
+ *      -EBADF:       Failed to open target code.
+ *  Requires:
+ *      COD module initialized.
+ *      hmgr is valid.
+ *      flags == COD_NOLOAD || flags == COD_SYMB.
+ *      sz_coff_path != NULL.
+ *  Ensures:
+ */
+extern int cod_open(struct cod_manager *hmgr,
+			   char *sz_coff_path,
+			   u32 flags, struct cod_libraryobj **lib_obj);
+
+/*
+ *  ======== cod_open_base ========
+ *  Purpose:
+ *      Open base image for reading sections. Does not load the base.
+ *  Parameters:
+ *      hmgr:           manager to load the code with
+ *      sz_coff_path:   Coff file to open.
+ *      flags:          Specifies whether to load symbols.
+ *  Returns:
+ *      0:            Success.
+ *      -EBADF:   Failed to open target code.
+ *  Requires:
+ *      COD module initialized.
+ *      hmgr is valid.
+ *      sz_coff_path != NULL.
+ *  Ensures:
+ */
+extern int cod_open_base(struct cod_manager *hmgr, char *sz_coff_path,
+				dbll_flags flags);
+
+/*
+ *  ======== cod_read_section ========
+ *  Purpose:
+ *      Retrieve the content of a code section given the section name.
+ *  Parameters:
+ *      cod_mgr_obj    - manager in which to search for the symbol
+ *      str_sect    - name of the section, with or without leading "."
+ *      str_content - buffer to store content of the section.
+ *  Returns:
+ *      0: on success, error code on failure
+ *      -ESPIPE:  Symbols have not been loaded onto the board.
+ *  Requires:
+ *      COD module initialized.
+ *      valid cod_mgr_obj.
+ *      str_sect != NULL;
+ *      str_content != NULL;
+ *  Ensures:
+ *      0:  *str_content stores the content of the named section.
+ */
+extern int cod_read_section(struct cod_libraryobj *lib,
+				   char *str_sect,
+				   char *str_content, u32 content_size);
+
+#endif /* COD_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbc.h b/drivers/staging/tidspbridge/include/dspbridge/dbc.h
new file mode 100644
index 00000000000..463760f499a
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbc.h
@@ -0,0 +1,46 @@
+/*
+ * dbc.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * "Design by Contract" programming macros.
+ *
+ * Notes:
+ *   Requires that the GT->ERROR function has been defaulted to a valid
+ *   error handler for the given execution environment.
+ *
+ *   Does not require that GT_init() be called.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBC_
+#define DBC_
+
+/* Assertion Macros: */
+#ifdef CONFIG_TIDSPBRIDGE_DEBUG
+
+#define DBC_ASSERT(exp) \
+    if (!(exp)) \
+	pr_err("%s, line %d: Assertion (" #exp ") failed.\n", \
+	__FILE__, __LINE__)
+#define DBC_REQUIRE DBC_ASSERT	/* Function Precondition. */
+#define DBC_ENSURE  DBC_ASSERT	/* Function Postcondition. */
+
+#else
+
+#define DBC_ASSERT(exp) {}
+#define DBC_REQUIRE(exp) {}
+#define DBC_ENSURE(exp) {}
+
+#endif /* DEBUG */
+
+#endif /* DBC_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbdcd.h b/drivers/staging/tidspbridge/include/dspbridge/dbdcd.h
new file mode 100644
index 00000000000..7cc3e12686e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbdcd.h
@@ -0,0 +1,358 @@
+/*
+ * dbdcd.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Defines the DSP/BIOS Bridge Configuration Database (DCD) API.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBDCD_
+#define DBDCD_
+
+#include <dspbridge/dbdcddef.h>
+#include <dspbridge/host_os.h>
+#include <dspbridge/nldrdefs.h>
+
+/*
+ *  ======== dcd_auto_register ========
+ *  Purpose:
+ *      This function automatically registers DCD objects specified in a
+ *      special COFF section called ".dcd_register"
+ *  Parameters:
+ *      hdcd_mgr:                A DCD manager handle.
+ *      sz_coff_path:           Pointer to name of COFF file containing DCD
+ *                              objects to be registered.
+ *  Returns:
+ *      0:                Success.
+ *      -EACCES: Unable to find auto-registration/read/load section.
+ *      -EFAULT:            Invalid DCD_HMANAGER handle..
+ *  Requires:
+ *      DCD initialized.
+ *  Ensures:
+ *  Note:
+ *      Due to the DCD database construction, it is essential for a DCD-enabled
+ *      COFF file to contain the right COFF sections, especially
+ *      ".dcd_register", which is used for auto registration.
+ */
+extern int dcd_auto_register(struct dcd_manager *hdcd_mgr,
+				    char *sz_coff_path);
+
+/*
+ *  ======== dcd_auto_unregister ========
+ *  Purpose:
+ *      This function automatically unregisters DCD objects specified in a
+ *      special COFF section called ".dcd_register"
+ *  Parameters:
+ *      hdcd_mgr:                A DCD manager handle.
+ *      sz_coff_path:           Pointer to name of COFF file containing
+ *                              DCD objects to be unregistered.
+ *  Returns:
+ *      0:                Success.
+ *      -EACCES: Unable to find auto-registration/read/load section.
+ *      -EFAULT:            Invalid DCD_HMANAGER handle..
+ *  Requires:
+ *      DCD initialized.
+ *  Ensures:
+ *  Note:
+ *      Due to the DCD database construction, it is essential for a DCD-enabled
+ *      COFF file to contain the right COFF sections, especially
+ *      ".dcd_register", which is used for auto unregistration.
+ */
+extern int dcd_auto_unregister(struct dcd_manager *hdcd_mgr,
+				      char *sz_coff_path);
+
+/*
+ *  ======== dcd_create_manager ========
+ *  Purpose:
+ *      This function creates a DCD module manager.
+ *  Parameters:
+ *      sz_zl_dll_name: Pointer to a DLL name string.
+ *      dcd_mgr:        A pointer to a DCD manager handle.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Unable to allocate memory for DCD manager handle.
+ *      -EPERM:      General failure.
+ *  Requires:
+ *      DCD initialized.
+ *      sz_zl_dll_name is non-NULL.
+ *      dcd_mgr is non-NULL.
+ *  Ensures:
+ *      A DCD manager handle is created.
+ */
+extern int dcd_create_manager(char *sz_zl_dll_name,
+				     struct dcd_manager **dcd_mgr);
+
+/*
+ *  ======== dcd_destroy_manager ========
+ *  Purpose:
+ *      This function destroys a DCD module manager.
+ *  Parameters:
+ *      hdcd_mgr:        A DCD manager handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid DCD manager handle.
+ *  Requires:
+ *      DCD initialized.
+ *  Ensures:
+ */
+extern int dcd_destroy_manager(struct dcd_manager *hdcd_mgr);
+
+/*
+ *  ======== dcd_enumerate_object ========
+ *  Purpose:
+ *      This function enumerates currently visible DSP/BIOS Bridge objects
+ *      and returns the UUID and type of each enumerated object.
+ *  Parameters:
+ *      index:              The object enumeration index.
+ *      obj_type:            Type of object to enumerate.
+ *      uuid_obj:              Pointer to a dsp_uuid object.
+ *  Returns:
+ *      0:            Success.
+ *      -EPERM:          Unable to enumerate through the DCD database.
+ *      ENODATA:  Enumeration completed. This is not an error code.
+ *  Requires:
+ *      DCD initialized.
+ *      uuid_obj is a valid pointer.
+ *  Ensures:
+ *  Details:
+ *      This function can be used in conjunction with dcd_get_object_def to
+ *      retrieve object properties.
+ */
+extern int dcd_enumerate_object(s32 index,
+				       enum dsp_dcdobjtype obj_type,
+				       struct dsp_uuid *uuid_obj);
+
+/*
+ *  ======== dcd_exit ========
+ *  Purpose:
+ *      This function cleans up the DCD module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      DCD initialized.
+ *  Ensures:
+ */
+extern void dcd_exit(void);
+
+/*
+ *  ======== dcd_get_dep_libs ========
+ *  Purpose:
+ *      Given the uuid of a library and size of array of uuids, this function
+ *      fills the array with the uuids of all dependent libraries of the input
+ *      library.
+ *  Parameters:
+ *      hdcd_mgr: A DCD manager handle.
+ *      uuid_obj: Pointer to a dsp_uuid for a library.
+ *      num_libs: Size of uuid array (number of library uuids).
+ *      dep_lib_uuids: Array of dependent library uuids to be filled in.
+ *      prstnt_dep_libs:    Array indicating if corresponding lib is persistent.
+ *      phase: phase to obtain correct input library
+ *  Returns:
+ *      0: Success.
+ *      -ENOMEM: Memory allocation failure.
+ *      -EACCES: Failure to read section containing library info.
+ *      -EPERM: General failure.
+ *  Requires:
+ *      DCD initialized.
+ *      Valid hdcd_mgr.
+ *      uuid_obj != NULL
+ *      dep_lib_uuids != NULL.
+ *  Ensures:
+ */
+extern int dcd_get_dep_libs(struct dcd_manager *hdcd_mgr,
+				   struct dsp_uuid *uuid_obj,
+				   u16 num_libs,
+				   struct dsp_uuid *dep_lib_uuids,
+				   bool *prstnt_dep_libs,
+				   enum nldr_phase phase);
+
+/*
+ *  ======== dcd_get_num_dep_libs ========
+ *  Purpose:
+ *      Given the uuid of a library, determine its number of dependent
+ *      libraries.
+ *  Parameters:
+ *      hdcd_mgr:        A DCD manager handle.
+ *      uuid_obj:          Pointer to a dsp_uuid for a library.
+ *      num_libs:       Size of uuid array (number of library uuids).
+ *      num_pers_libs:  number of persistent dependent library.
+ *      phase:          Phase to obtain correct input library
+ *  Returns:
+ *      0: Success.
+ *      -ENOMEM: Memory allocation failure.
+ *      -EACCES: Failure to read section containing library info.
+ *      -EPERM: General failure.
+ *  Requires:
+ *      DCD initialized.
+ *      Valid hdcd_mgr.
+ *      uuid_obj != NULL
+ *      num_libs != NULL.
+ *  Ensures:
+ */
+extern int dcd_get_num_dep_libs(struct dcd_manager *hdcd_mgr,
+				       struct dsp_uuid *uuid_obj,
+				       u16 *num_libs,
+				       u16 *num_pers_libs,
+				       enum nldr_phase phase);
+
+/*
+ *  ======== dcd_get_library_name ========
+ *  Purpose:
+ *      This function returns the name of a (dynamic) library for a given
+ *      UUID.
+ *  Parameters:
+ *      hdcd_mgr: A DCD manager handle.
+ *      uuid_obj:	Pointer to a dsp_uuid that represents a unique DSP/BIOS
+ *                      Bridge object.
+ *      str_lib_name: Buffer to hold library name.
+ *      buff_size: Contains buffer size. Set to string size on output.
+ *      phase:          Which phase to load
+ *      phase_split:    Are phases in multiple libraries
+ *  Returns:
+ *      0: Success.
+ *      -EPERM: General failure.
+ *  Requires:
+ *      DCD initialized.
+ *      Valid hdcd_mgr.
+ *      str_lib_name != NULL.
+ *      uuid_obj != NULL
+ *      buff_size != NULL.
+ *  Ensures:
+ */
+extern int dcd_get_library_name(struct dcd_manager *hdcd_mgr,
+				       struct dsp_uuid *uuid_obj,
+				       char *str_lib_name,
+				       u32 *buff_size,
+				       enum nldr_phase phase,
+				       bool *phase_split);
+
+/*
+ *  ======== dcd_get_object_def ========
+ *  Purpose:
+ *      This function returns the properties/attributes of a DSP/BIOS Bridge
+ *      object.
+ *  Parameters:
+ *      hdcd_mgr:            A DCD manager handle.
+ *      uuid_obj:              Pointer to a dsp_uuid that represents a unique
+ *                          DSP/BIOS Bridge object.
+ *      obj_type:            The type of DSP/BIOS Bridge object to be
+ *                          referenced (node, processor, etc).
+ *      obj_def:            Pointer to an object definition structure. A
+ *                          union of various possible DCD object types.
+ *  Returns:
+ *      0: Success.
+ *      -EACCES: Unable to access/read/parse/load content of object code
+ *               section.
+ *      -EPERM:          General failure.
+ *      -EFAULT:        Invalid DCD_HMANAGER handle.
+ *  Requires:
+ *      DCD initialized.
+ *      obj_uuid is non-NULL.
+ *      obj_def is non-NULL.
+ *  Ensures:
+ */
+extern int dcd_get_object_def(struct dcd_manager *hdcd_mgr,
+				     struct dsp_uuid *obj_uuid,
+				     enum dsp_dcdobjtype obj_type,
+				     struct dcd_genericobj *obj_def);
+
+/*
+ *  ======== dcd_get_objects ========
+ *  Purpose:
+ *      This function finds all DCD objects specified in a special
+ *      COFF section called ".dcd_register", and for each object,
+ *      call a "register" function.  The "register" function may perform
+ *      various actions, such as 1) register nodes in the node database, 2)
+ *      unregister nodes from the node database, and 3) add overlay nodes.
+ *  Parameters:
+ *      hdcd_mgr:                A DCD manager handle.
+ *      sz_coff_path:           Pointer to name of COFF file containing DCD
+ *                              objects.
+ *      register_fxn:           Callback fxn to be applied on each located
+ *                              DCD object.
+ *      handle:                 Handle to pass to callback.
+ *  Returns:
+ *      0:                Success.
+ *      -EACCES: Unable to access/read/parse/load content of object code
+ *               section.
+ *      -EFAULT:            Invalid DCD_HMANAGER handle..
+ *  Requires:
+ *      DCD initialized.
+ *  Ensures:
+ *  Note:
+ *      Due to the DCD database construction, it is essential for a DCD-enabled
+ *      COFF file to contain the right COFF sections, especially
+ *      ".dcd_register", which is used for auto registration.
+ */
+extern int dcd_get_objects(struct dcd_manager *hdcd_mgr,
+				  char *sz_coff_path,
+				  dcd_registerfxn register_fxn, void *handle);
+
+/*
+ *  ======== dcd_init ========
+ *  Purpose:
+ *      This function initializes DCD.
+ *  Parameters:
+ *  Returns:
+ *      FALSE:  Initialization failed.
+ *      TRUE:   Initialization succeeded.
+ *  Requires:
+ *  Ensures:
+ *      DCD initialized.
+ */
+extern bool dcd_init(void);
+
+/*
+ *  ======== dcd_register_object ========
+ *  Purpose:
+ *      This function registers a DSP/BIOS Bridge object in the DCD database.
+ *  Parameters:
+ *      uuid_obj:          Pointer to a dsp_uuid that identifies a DSP/BIOS
+ *                      Bridge object.
+ *      obj_type:        Type of object.
+ *      psz_path_name:    Path to the object's COFF file.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Failed to register object.
+ *  Requires:
+ *      DCD initialized.
+ *      uuid_obj and szPathName are non-NULL values.
+ *      obj_type is a valid type value.
+ *  Ensures:
+ */
+extern int dcd_register_object(struct dsp_uuid *uuid_obj,
+				      enum dsp_dcdobjtype obj_type,
+				      char *psz_path_name);
+
+/*
+ *  ======== dcd_unregister_object ========
+ *  Purpose:
+ *      This function de-registers a valid DSP/BIOS Bridge object from the DCD
+ *      database.
+ *  Parameters:
+ *      uuid_obj:      Pointer to a dsp_uuid that identifies a DSP/BIOS Bridge
+ *                  object.
+ *      obj_type:    Type of object.
+ *  Returns:
+ *      0:    Success.
+ *      -EPERM:  Unable to de-register the specified object.
+ *  Requires:
+ *      DCD initialized.
+ *      uuid_obj is a non-NULL value.
+ *      obj_type is a valid type value.
+ *  Ensures:
+ */
+extern int dcd_unregister_object(struct dsp_uuid *uuid_obj,
+					enum dsp_dcdobjtype obj_type);
+
+#endif /* _DBDCD_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbdcddef.h b/drivers/staging/tidspbridge/include/dspbridge/dbdcddef.h
new file mode 100644
index 00000000000..1daa4b57b73
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbdcddef.h
@@ -0,0 +1,78 @@
+/*
+ * dbdcddef.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DCD (DSP/BIOS Bridge Configuration Database) constants and types.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBDCDDEF_
+#define DBDCDDEF_
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/mgrpriv.h>	/* for mgr_processorextinfo */
+
+/*
+ *  The following defines are critical elements for the DCD module:
+ *
+ * - DCD_REGKEY enables DCD functions to locate registered DCD objects.
+ * - DCD_REGISTER_SECTION identifies the COFF section where the UUID of
+ *   registered DCD objects are stored.
+ */
+#define DCD_REGKEY              "Software\\TexasInstruments\\DspBridge\\DCD"
+#define DCD_REGISTER_SECTION    ".dcd_register"
+
+#define DCD_MAXPATHLENGTH    255
+
+/* DCD Manager Object */
+struct dcd_manager;
+
+struct dcd_key_elem {
+	struct list_head link;	/* Make it linked to a list */
+	char name[DCD_MAXPATHLENGTH];	/*  Name of a given value entry */
+	char *path;		/*  Pointer to the actual data */
+};
+
+/* DCD Node Properties */
+struct dcd_nodeprops {
+	struct dsp_ndbprops ndb_props;
+	u32 msg_segid;
+	u32 msg_notify_type;
+	char *pstr_create_phase_fxn;
+	char *pstr_delete_phase_fxn;
+	char *pstr_execute_phase_fxn;
+	char *pstr_i_alg_name;
+
+	/* Dynamic load properties */
+	u16 us_load_type;	/* Static, dynamic, overlay */
+	u32 ul_data_mem_seg_mask;	/* Data memory requirements */
+	u32 ul_code_mem_seg_mask;	/* Code memory requirements */
+};
+
+/* DCD Generic Object Type */
+struct dcd_genericobj {
+	union dcd_obj {
+		struct dcd_nodeprops node_obj;	/* node object. */
+		/* processor object. */
+		struct dsp_processorinfo proc_info;
+		/* extended proc object (private) */
+		struct mgr_processorextinfo ext_proc_obj;
+	} obj_data;
+};
+
+/* DCD Internal Callback Type */
+typedef int(*dcd_registerfxn) (struct dsp_uuid *uuid_obj,
+				      enum dsp_dcdobjtype obj_type,
+				      void *handle);
+
+#endif /* DBDCDDEF_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dbdefs.h
new file mode 100644
index 00000000000..5af075def87
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbdefs.h
@@ -0,0 +1,514 @@
+/*
+ * dbdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global definitions and constants for DSP/BIOS Bridge.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBDEFS_
+#define DBDEFS_
+
+#include <linux/types.h>
+
+#include <dspbridge/rms_sh.h>	/* Types shared between GPP and DSP */
+
+#define PG_SIZE4K 4096
+#define PG_MASK(pg_size) (~((pg_size)-1))
+#define PG_ALIGN_LOW(addr, pg_size) ((addr) & PG_MASK(pg_size))
+#define PG_ALIGN_HIGH(addr, pg_size) (((addr)+(pg_size)-1) & PG_MASK(pg_size))
+
+/* API return value and calling convention */
+#define DBAPI                       int
+
+/* Infinite time value for the utimeout parameter to DSPStream_Select() */
+#define DSP_FOREVER                 (-1)
+
+/* Maximum length of node name, used in dsp_ndbprops */
+#define DSP_MAXNAMELEN              32
+
+/* notify_type values for the RegisterNotify() functions. */
+#define DSP_SIGNALEVENT             0x00000001
+
+/* Types of events for processors */
+#define DSP_PROCESSORSTATECHANGE    0x00000001
+#define DSP_PROCESSORATTACH         0x00000002
+#define DSP_PROCESSORDETACH         0x00000004
+#define DSP_PROCESSORRESTART        0x00000008
+
+/* DSP exception events (DSP/BIOS and DSP MMU fault) */
+#define DSP_MMUFAULT                0x00000010
+#define DSP_SYSERROR                0x00000020
+#define DSP_EXCEPTIONABORT          0x00000300
+#define DSP_PWRERROR                0x00000080
+#define DSP_WDTOVERFLOW	0x00000040
+
+/* IVA exception events (IVA MMU fault) */
+#define IVA_MMUFAULT                0x00000040
+/* Types of events for nodes */
+#define DSP_NODESTATECHANGE         0x00000100
+#define DSP_NODEMESSAGEREADY        0x00000200
+
+/* Types of events for streams */
+#define DSP_STREAMDONE              0x00001000
+#define DSP_STREAMIOCOMPLETION      0x00002000
+
+/* Handle definition representing the GPP node in DSPNode_Connect() calls */
+#define DSP_HGPPNODE                0xFFFFFFFF
+
+/* Node directions used in DSPNode_Connect() */
+#define DSP_TONODE                  1
+#define DSP_FROMNODE                2
+
+/* Define Node Minimum and Maximum Priorities */
+#define DSP_NODE_MIN_PRIORITY       1
+#define DSP_NODE_MAX_PRIORITY       15
+
+/* Pre-Defined Message Command Codes available to user: */
+#define DSP_RMSUSERCODESTART RMS_USER	/* Start of RMS user cmd codes */
+/* end of user codes */
+#define DSP_RMSUSERCODEEND (RMS_USER + RMS_MAXUSERCODES);
+/* msg_ctrl contains SM buffer description */
+#define DSP_RMSBUFDESC RMS_BUFDESC
+
+/* Shared memory identifier for MEM segment named "SHMSEG0" */
+#define DSP_SHMSEG0     (u32)(-1)
+
+/* Processor ID numbers */
+#define DSP_UNIT    0
+#define IVA_UNIT    1
+
+#define DSPWORD       unsigned char
+#define DSPWORDSIZE     sizeof(DSPWORD)
+
+/* Power control enumerations */
+#define PROC_PWRCONTROL             0x8070
+
+#define PROC_PWRMGT_ENABLE          (PROC_PWRCONTROL + 0x3)
+#define PROC_PWRMGT_DISABLE         (PROC_PWRCONTROL + 0x4)
+
+/* Bridge Code Version */
+#define BRIDGE_VERSION_CODE         333
+
+#define    MAX_PROFILES     16
+
+/* DSP chip type */
+#define DSPTYPE64	0x99
+
+/* Handy Macros */
+#define VALID_PROC_EVENT (DSP_PROCESSORSTATECHANGE | DSP_PROCESSORATTACH | \
+	DSP_PROCESSORDETACH | DSP_PROCESSORRESTART | DSP_NODESTATECHANGE | \
+	DSP_STREAMDONE | DSP_STREAMIOCOMPLETION | DSP_MMUFAULT | \
+	DSP_SYSERROR | DSP_WDTOVERFLOW | DSP_PWRERROR)
+
+static inline bool is_valid_proc_event(u32 x)
+{
+	return (x == 0 || (x & VALID_PROC_EVENT && !(x & ~VALID_PROC_EVENT)));
+}
+
+/* The Node UUID structure */
+struct dsp_uuid {
+	u32 ul_data1;
+	u16 us_data2;
+	u16 us_data3;
+	u8 uc_data4;
+	u8 uc_data5;
+	u8 uc_data6[6];
+};
+
+/* DCD types */
+enum dsp_dcdobjtype {
+	DSP_DCDNODETYPE,
+	DSP_DCDPROCESSORTYPE,
+	DSP_DCDLIBRARYTYPE,
+	DSP_DCDCREATELIBTYPE,
+	DSP_DCDEXECUTELIBTYPE,
+	DSP_DCDDELETELIBTYPE,
+	/* DSP_DCDMAXOBJTYPE is meant to be the last DCD object type */
+	DSP_DCDMAXOBJTYPE
+};
+
+/* Processor states */
+enum dsp_procstate {
+	PROC_STOPPED,
+	PROC_LOADED,
+	PROC_RUNNING,
+	PROC_ERROR
+};
+
+/*
+ *  Node types: Message node, task node, xDAIS socket node, and
+ *  device node. _NODE_GPP is used when defining a stream connection
+ *  between a task or socket node and the GPP.
+ *
+ */
+enum node_type {
+	NODE_DEVICE,
+	NODE_TASK,
+	NODE_DAISSOCKET,
+	NODE_MESSAGE,
+	NODE_GPP
+};
+
+/*
+ *  ======== node_state ========
+ *  Internal node states.
+ */
+enum node_state {
+	NODE_ALLOCATED,
+	NODE_CREATED,
+	NODE_RUNNING,
+	NODE_PAUSED,
+	NODE_DONE,
+	NODE_CREATING,
+	NODE_STARTING,
+	NODE_PAUSING,
+	NODE_TERMINATING,
+	NODE_DELETING,
+};
+
+/* Stream states */
+enum dsp_streamstate {
+	STREAM_IDLE,
+	STREAM_READY,
+	STREAM_PENDING,
+	STREAM_DONE
+};
+
+/* Stream connect types */
+enum dsp_connecttype {
+	CONNECTTYPE_NODEOUTPUT,
+	CONNECTTYPE_GPPOUTPUT,
+	CONNECTTYPE_NODEINPUT,
+	CONNECTTYPE_GPPINPUT
+};
+
+/* Stream mode types */
+enum dsp_strmmode {
+	STRMMODE_PROCCOPY,	/* Processor(s) copy stream data payloads */
+	STRMMODE_ZEROCOPY,	/* Strm buffer ptrs swapped no data copied */
+	STRMMODE_LDMA,		/* Local DMA : OMAP's System-DMA device */
+	STRMMODE_RDMA		/* Remote DMA: OMAP's DSP-DMA device */
+};
+
+/* Resource Types */
+enum dsp_resourceinfotype {
+	DSP_RESOURCE_DYNDARAM = 0,
+	DSP_RESOURCE_DYNSARAM,
+	DSP_RESOURCE_DYNEXTERNAL,
+	DSP_RESOURCE_DYNSRAM,
+	DSP_RESOURCE_PROCLOAD
+};
+
+/* Memory Segment Types */
+enum dsp_memtype {
+	DSP_DYNDARAM = 0,
+	DSP_DYNSARAM,
+	DSP_DYNEXTERNAL,
+	DSP_DYNSRAM
+};
+
+/* Memory Flush Types */
+enum dsp_flushtype {
+	PROC_INVALIDATE_MEM = 0,
+	PROC_WRITEBACK_MEM,
+	PROC_WRITEBACK_INVALIDATE_MEM,
+};
+
+/* Memory Segment Status Values */
+struct dsp_memstat {
+	u32 ul_size;
+	u32 ul_total_free_size;
+	u32 ul_len_max_free_block;
+	u32 ul_num_free_blocks;
+	u32 ul_num_alloc_blocks;
+};
+
+/* Processor Load information Values */
+struct dsp_procloadstat {
+	u32 curr_load;
+	u32 predicted_load;
+	u32 curr_dsp_freq;
+	u32 predicted_freq;
+};
+
+/* Attributes for STRM connections between nodes */
+struct dsp_strmattr {
+	u32 seg_id;		/* Memory segment on DSP to allocate buffers */
+	u32 buf_size;		/* Buffer size (DSP words) */
+	u32 num_bufs;		/* Number of buffers */
+	u32 buf_alignment;	/* Buffer alignment */
+	u32 utimeout;		/* Timeout for blocking STRM calls */
+	enum dsp_strmmode strm_mode;	/* mode of stream when opened */
+	/* DMA chnl id if dsp_strmmode is LDMA or RDMA */
+	u32 udma_chnl_id;
+	u32 udma_priority;	/* DMA channel priority 0=lowest, >0=high */
+};
+
+/* The dsp_cbdata structure */
+struct dsp_cbdata {
+	u32 cb_data;
+	u8 node_data[1];
+};
+
+/* The dsp_msg structure */
+struct dsp_msg {
+	u32 dw_cmd;
+	u32 dw_arg1;
+	u32 dw_arg2;
+};
+
+/* The dsp_resourcereqmts structure for node's resource requirements */
+struct dsp_resourcereqmts {
+	u32 cb_struct;
+	u32 static_data_size;
+	u32 global_data_size;
+	u32 program_mem_size;
+	u32 uwc_execution_time;
+	u32 uwc_period;
+	u32 uwc_deadline;
+	u32 avg_exection_time;
+	u32 minimum_period;
+};
+
+/*
+ * The dsp_streamconnect structure describes a stream connection
+ * between two nodes, or between a node and the GPP
+ */
+struct dsp_streamconnect {
+	u32 cb_struct;
+	enum dsp_connecttype connect_type;
+	u32 this_node_stream_index;
+	void *connected_node;
+	struct dsp_uuid ui_connected_node_id;
+	u32 connected_node_stream_index;
+};
+
+struct dsp_nodeprofs {
+	u32 ul_heap_size;
+};
+
+/* The dsp_ndbprops structure reports the attributes of a node */
+struct dsp_ndbprops {
+	u32 cb_struct;
+	struct dsp_uuid ui_node_id;
+	char ac_name[DSP_MAXNAMELEN];
+	enum node_type ntype;
+	u32 cache_on_gpp;
+	struct dsp_resourcereqmts dsp_resource_reqmts;
+	s32 prio;
+	u32 stack_size;
+	u32 sys_stack_size;
+	u32 stack_seg;
+	u32 message_depth;
+	u32 num_input_streams;
+	u32 num_output_streams;
+	u32 utimeout;
+	u32 count_profiles;	/* Number of supported profiles */
+	/* Array of profiles */
+	struct dsp_nodeprofs node_profiles[MAX_PROFILES];
+	u32 stack_seg_name;	/* Stack Segment Name */
+};
+
+	/* The dsp_nodeattrin structure describes the attributes of a
+	 * node client */
+struct dsp_nodeattrin {
+	u32 cb_struct;
+	s32 prio;
+	u32 utimeout;
+	u32 profile_id;
+	/* Reserved, for Bridge Internal use only */
+	u32 heap_size;
+	void *pgpp_virt_addr;	/* Reserved, for Bridge Internal use only */
+};
+
+	/* The dsp_nodeinfo structure is used to retrieve information
+	 * about a node */
+struct dsp_nodeinfo {
+	u32 cb_struct;
+	struct dsp_ndbprops nb_node_database_props;
+	u32 execution_priority;
+	enum node_state ns_execution_state;
+	void *device_owner;
+	u32 number_streams;
+	struct dsp_streamconnect sc_stream_connection[16];
+	u32 node_env;
+};
+
+	/* The dsp_nodeattr structure describes the attributes of a node */
+struct dsp_nodeattr {
+	u32 cb_struct;
+	struct dsp_nodeattrin in_node_attr_in;
+	u32 node_attr_inputs;
+	u32 node_attr_outputs;
+	struct dsp_nodeinfo node_info;
+};
+
+/*
+ *  Notification type: either the name of an opened event, or an event or
+ *  window handle.
+ */
+struct dsp_notification {
+	char *ps_name;
+	void *handle;
+};
+
+/* The dsp_processorattrin structure describes the attributes of a processor */
+struct dsp_processorattrin {
+	u32 cb_struct;
+	u32 utimeout;
+};
+/*
+ * The dsp_processorinfo structure describes basic capabilities of a
+ * DSP processor
+ */
+struct dsp_processorinfo {
+	u32 cb_struct;
+	int processor_family;
+	int processor_type;
+	u32 clock_rate;
+	u32 ul_internal_mem_size;
+	u32 ul_external_mem_size;
+	u32 processor_id;
+	int ty_running_rtos;
+	s32 node_min_priority;
+	s32 node_max_priority;
+};
+
+/* Error information of last DSP exception signalled to the GPP */
+struct dsp_errorinfo {
+	u32 dw_err_mask;
+	u32 dw_val1;
+	u32 dw_val2;
+	u32 dw_val3;
+};
+
+/* The dsp_processorstate structure describes the state of a DSP processor */
+struct dsp_processorstate {
+	u32 cb_struct;
+	enum dsp_procstate proc_state;
+};
+
+/*
+ * The dsp_resourceinfo structure is used to retrieve information about a
+ * processor's resources
+ */
+struct dsp_resourceinfo {
+	u32 cb_struct;
+	enum dsp_resourceinfotype resource_type;
+	union {
+		u32 ul_resource;
+		struct dsp_memstat mem_stat;
+		struct dsp_procloadstat proc_load_stat;
+	} result;
+};
+
+/*
+ * The dsp_streamattrin structure describes the attributes of a stream,
+ * including segment and alignment of data buffers allocated with
+ * DSPStream_AllocateBuffers(), if applicable
+ */
+struct dsp_streamattrin {
+	u32 cb_struct;
+	u32 utimeout;
+	u32 segment_id;
+	u32 buf_alignment;
+	u32 num_bufs;
+	enum dsp_strmmode strm_mode;
+	u32 udma_chnl_id;
+	u32 udma_priority;
+};
+
+/* The dsp_bufferattr structure describes the attributes of a data buffer */
+struct dsp_bufferattr {
+	u32 cb_struct;
+	u32 segment_id;
+	u32 buf_alignment;
+};
+
+/*
+ *  The dsp_streaminfo structure is used to retrieve information
+ *  about a stream.
+ */
+struct dsp_streaminfo {
+	u32 cb_struct;
+	u32 number_bufs_allowed;
+	u32 number_bufs_in_stream;
+	u32 ul_number_bytes;
+	void *sync_object_handle;
+	enum dsp_streamstate ss_stream_state;
+};
+
+/* DMM MAP attributes
+It is a bit mask with each bit value indicating a specific attribute
+bit 0 - GPP address type (user virtual=0, physical=1)
+bit 1 - MMU Endianism (Big Endian=1, Little Endian=0)
+bit 2 - MMU mixed page attribute (Mixed/ CPUES=1, TLBES =0)
+bit 3 - MMU element size = 8bit (valid only for non mixed page entries)
+bit 4 - MMU element size = 16bit (valid only for non mixed page entries)
+bit 5 - MMU element size = 32bit (valid only for non mixed page entries)
+bit 6 - MMU element size = 64bit (valid only for non mixed page entries)
+
+bit 14 - Input (read only) buffer
+bit 15 - Output (writeable) buffer
+*/
+
+/* Types of mapping attributes */
+
+/* MPU address is virtual and needs to be translated to physical addr */
+#define DSP_MAPVIRTUALADDR          0x00000000
+#define DSP_MAPPHYSICALADDR         0x00000001
+
+/* Mapped data is big endian */
+#define DSP_MAPBIGENDIAN            0x00000002
+#define DSP_MAPLITTLEENDIAN         0x00000000
+
+/* Element size is based on DSP r/w access size */
+#define DSP_MAPMIXEDELEMSIZE        0x00000004
+
+/*
+ * Element size for MMU mapping (8, 16, 32, or 64 bit)
+ * Ignored if DSP_MAPMIXEDELEMSIZE enabled
+ */
+#define DSP_MAPELEMSIZE8            0x00000008
+#define DSP_MAPELEMSIZE16           0x00000010
+#define DSP_MAPELEMSIZE32           0x00000020
+#define DSP_MAPELEMSIZE64           0x00000040
+
+#define DSP_MAPVMALLOCADDR         0x00000080
+
+#define DSP_MAPDONOTLOCK	   0x00000100
+
+#define DSP_MAP_DIR_MASK		0x3FFF
+
+#define GEM_CACHE_LINE_SIZE     128
+#define GEM_L1P_PREFETCH_SIZE   128
+
+/*
+ * Definitions from dbreg.h
+ */
+
+#define DSPPROCTYPE_C64		6410
+#define IVAPROCTYPE_ARM7	470
+
+#define REG_MGR_OBJECT	1
+#define REG_DRV_OBJECT	2
+
+/* registry */
+#define DRVOBJECT	"DrvObject"
+#define MGROBJECT	"MgrObject"
+
+/* Max registry path length. Also the max registry value length. */
+#define MAXREGPATHLENGTH	255
+
+#endif /* DBDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbldefs.h b/drivers/staging/tidspbridge/include/dspbridge/dbldefs.h
new file mode 100644
index 00000000000..bf4fb99529a
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbldefs.h
@@ -0,0 +1,141 @@
+/*
+ * dbldefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBLDEFS_
+#define DBLDEFS_
+
+/*
+ *  Bit masks for dbl_flags.
+ */
+#define DBL_NOLOAD   0x0	/* Don't load symbols, code, or data */
+#define DBL_SYMB     0x1	/* load symbols */
+#define DBL_CODE     0x2	/* load code */
+#define DBL_DATA     0x4	/* load data */
+#define DBL_DYNAMIC  0x8	/* dynamic load */
+#define DBL_BSS      0x20	/* Unitialized section */
+
+#define DBL_MAXPATHLENGTH       255
+
+/*
+ *  ======== dbl_flags ========
+ *  Specifies whether to load code, data, or symbols
+ */
+typedef s32 dbl_flags;
+
+/*
+ *  ======== dbl_sect_info ========
+ *  For collecting info on overlay sections
+ */
+struct dbl_sect_info {
+	const char *name;	/* name of section */
+	u32 sect_run_addr;	/* run address of section */
+	u32 sect_load_addr;	/* load address of section */
+	u32 size;		/* size of section (target MAUs) */
+	dbl_flags type;		/* Code, data, or BSS */
+};
+
+/*
+ *  ======== dbl_symbol ========
+ *  (Needed for dynamic load library)
+ */
+struct dbl_symbol {
+	u32 value;
+};
+
+/*
+ *  ======== dbl_alloc_fxn ========
+ *  Allocate memory function.  Allocate or reserve (if reserved == TRUE)
+ *  "size" bytes of memory from segment "space" and return the address in
+ *  *dsp_address (or starting at *dsp_address if reserve == TRUE). Returns 0 on
+ *  success, or an error code on failure.
+ */
+typedef s32(*dbl_alloc_fxn) (void *hdl, s32 space, u32 size, u32 align,
+			     u32 *dsp_address, s32 seg_id, s32 req,
+			     bool reserved);
+
+/*
+ *  ======== dbl_free_fxn ========
+ *  Free memory function.  Free, or unreserve (if reserved == TRUE) "size"
+ *  bytes of memory from segment "space"
+ */
+typedef bool(*dbl_free_fxn) (void *hdl, u32 addr, s32 space, u32 size,
+			     bool reserved);
+
+/*
+ *  ======== dbl_log_write_fxn ========
+ *  Function to call when writing data from a section, to log the info.
+ *  Can be NULL if no logging is required.
+ */
+typedef int(*dbl_log_write_fxn) (void *handle,
+					struct dbl_sect_info *sect, u32 addr,
+					u32 bytes);
+
+/*
+ *  ======== dbl_sym_lookup ========
+ *  Symbol lookup function - Find the symbol name and return its value.
+ *
+ *  Parameters:
+ *      handle          - Opaque handle
+ *      parg            - Opaque argument.
+ *      name            - Name of symbol to lookup.
+ *      sym             - Location to store address of symbol structure.
+ *
+ *  Returns:
+ *      TRUE:           Success (symbol was found).
+ *      FALSE:          Failed to find symbol.
+ */
+typedef bool(*dbl_sym_lookup) (void *handle, void *parg, void *rmm_handle,
+			       const char *name, struct dbl_symbol ** sym);
+
+/*
+ *  ======== dbl_write_fxn ========
+ *  Write memory function.  Write "n" HOST bytes of memory to segment "mtype"
+ *  starting at address "dsp_address" from the buffer "buf".  The buffer is
+ *  formatted as an array of words appropriate for the DSP.
+ */
+typedef s32(*dbl_write_fxn) (void *hdl, u32 dsp_address, void *buf,
+			     u32 n, s32 mtype);
+
+/*
+ *  ======== dbl_attrs ========
+ */
+struct dbl_attrs {
+	dbl_alloc_fxn alloc;
+	dbl_free_fxn free;
+	void *rmm_handle;	/* Handle to pass to alloc, free functions */
+	dbl_write_fxn write;
+	void *input_params;	/* Handle to pass to write, cinit function */
+
+	dbl_log_write_fxn log_write;
+	void *log_write_handle;
+
+	/* Symbol matching function and handle to pass to it */
+	dbl_sym_lookup sym_lookup;
+	void *sym_handle;
+	void *sym_arg;
+
+	/*
+	 *  These file manipulation functions should be compatible with the
+	 *  "C" run time library functions of the same name.
+	 */
+	 s32(*fread) (void *, size_t, size_t, void *);
+	 s32(*fseek) (void *, long, int);
+	 s32(*ftell) (void *);
+	 s32(*fclose) (void *);
+	void *(*fopen) (const char *, const char *);
+};
+
+#endif /* DBLDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dbll.h b/drivers/staging/tidspbridge/include/dspbridge/dbll.h
new file mode 100644
index 00000000000..b0186761466
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dbll.h
@@ -0,0 +1,62 @@
+/*
+ * dbll.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ *  DSP/BIOS Bridge Dynamic load library module interface. Function header
+ *  comments are in the file dblldefs.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBLL_
+#define DBLL_
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/dblldefs.h>
+
+extern bool symbols_reloaded;
+
+extern void dbll_close(struct dbll_library_obj *zl_lib);
+extern int dbll_create(struct dbll_tar_obj **target_obj,
+			      struct dbll_attrs *pattrs);
+extern void dbll_delete(struct dbll_tar_obj *target);
+extern void dbll_exit(void);
+extern bool dbll_get_addr(struct dbll_library_obj *zl_lib, char *name,
+			  struct dbll_sym_val **sym_val);
+extern void dbll_get_attrs(struct dbll_tar_obj *target,
+			   struct dbll_attrs *pattrs);
+extern bool dbll_get_c_addr(struct dbll_library_obj *zl_lib, char *name,
+			    struct dbll_sym_val **sym_val);
+extern int dbll_get_sect(struct dbll_library_obj *lib, char *name,
+				u32 *paddr, u32 *psize);
+extern bool dbll_init(void);
+extern int dbll_load(struct dbll_library_obj *lib,
+			    dbll_flags flags,
+			    struct dbll_attrs *attrs, u32 * entry);
+extern int dbll_load_sect(struct dbll_library_obj *zl_lib,
+				 char *sec_name, struct dbll_attrs *attrs);
+extern int dbll_open(struct dbll_tar_obj *target, char *file,
+			    dbll_flags flags,
+		       struct dbll_library_obj **lib_obj);
+extern int dbll_read_sect(struct dbll_library_obj *lib,
+				 char *name, char *buf, u32 size);
+extern void dbll_set_attrs(struct dbll_tar_obj *target,
+			   struct dbll_attrs *pattrs);
+extern void dbll_unload(struct dbll_library_obj *lib, struct dbll_attrs *attrs);
+extern int dbll_unload_sect(struct dbll_library_obj *lib,
+				   char *sect_name, struct dbll_attrs *attrs);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+bool dbll_find_dsp_symbol(struct dbll_library_obj *zl_lib, u32 address,
+		u32 offset_range, u32 *sym_addr_output, char *name_output);
+#endif
+
+#endif /* DBLL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dblldefs.h b/drivers/staging/tidspbridge/include/dspbridge/dblldefs.h
new file mode 100644
index 00000000000..d2b4fda3429
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dblldefs.h
@@ -0,0 +1,496 @@
+/*
+ * dblldefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DBLLDEFS_
+#define DBLLDEFS_
+
+/*
+ *  Bit masks for dbl_flags.
+ */
+#define DBLL_NOLOAD   0x0	/* Don't load symbols, code, or data */
+#define DBLL_SYMB     0x1	/* load symbols */
+#define DBLL_CODE     0x2	/* load code */
+#define DBLL_DATA     0x4	/* load data */
+#define DBLL_DYNAMIC  0x8	/* dynamic load */
+#define DBLL_BSS      0x20	/* Unitialized section */
+
+#define DBLL_MAXPATHLENGTH       255
+
+/*
+ *  ======== DBLL_Target ========
+ *
+ */
+struct dbll_tar_obj;
+
+/*
+ *  ======== dbll_flags ========
+ *  Specifies whether to load code, data, or symbols
+ */
+typedef s32 dbll_flags;
+
+/*
+ *  ======== DBLL_Library ========
+ *
+ */
+struct dbll_library_obj;
+
+/*
+ *  ======== dbll_sect_info ========
+ *  For collecting info on overlay sections
+ */
+struct dbll_sect_info {
+	const char *name;	/* name of section */
+	u32 sect_run_addr;	/* run address of section */
+	u32 sect_load_addr;	/* load address of section */
+	u32 size;		/* size of section (target MAUs) */
+	dbll_flags type;	/* Code, data, or BSS */
+};
+
+/*
+ *  ======== dbll_sym_val ========
+ *  (Needed for dynamic load library)
+ */
+struct dbll_sym_val {
+	u32 value;
+};
+
+/*
+ *  ======== dbll_alloc_fxn ========
+ *  Allocate memory function.  Allocate or reserve (if reserved == TRUE)
+ *  "size" bytes of memory from segment "space" and return the address in
+ *  *dsp_address (or starting at *dsp_address if reserve == TRUE). Returns 0 on
+ *  success, or an error code on failure.
+ */
+typedef s32(*dbll_alloc_fxn) (void *hdl, s32 space, u32 size, u32 align,
+			      u32 *dsp_address, s32 seg_id, s32 req,
+			      bool reserved);
+
+/*
+ *  ======== dbll_close_fxn ========
+ */
+typedef s32(*dbll_f_close_fxn) (void *);
+
+/*
+ *  ======== dbll_free_fxn ========
+ *  Free memory function.  Free, or unreserve (if reserved == TRUE) "size"
+ *  bytes of memory from segment "space"
+ */
+typedef bool(*dbll_free_fxn) (void *hdl, u32 addr, s32 space, u32 size,
+			      bool reserved);
+
+/*
+ *  ======== dbll_f_open_fxn ========
+ */
+typedef void *(*dbll_f_open_fxn) (const char *, const char *);
+
+/*
+ *  ======== dbll_log_write_fxn ========
+ *  Function to call when writing data from a section, to log the info.
+ *  Can be NULL if no logging is required.
+ */
+typedef int(*dbll_log_write_fxn) (void *handle,
+					 struct dbll_sect_info *sect, u32 addr,
+					 u32 bytes);
+
+/*
+ *  ======== dbll_read_fxn ========
+ */
+typedef s32(*dbll_read_fxn) (void *, size_t, size_t, void *);
+
+/*
+ *  ======== dbll_seek_fxn ========
+ */
+typedef s32(*dbll_seek_fxn) (void *, long, int);
+
+/*
+ *  ======== dbll_sym_lookup ========
+ *  Symbol lookup function - Find the symbol name and return its value.
+ *
+ *  Parameters:
+ *      handle          - Opaque handle
+ *      parg            - Opaque argument.
+ *      name            - Name of symbol to lookup.
+ *      sym             - Location to store address of symbol structure.
+ *
+ *  Returns:
+ *      TRUE:           Success (symbol was found).
+ *      FALSE:          Failed to find symbol.
+ */
+typedef bool(*dbll_sym_lookup) (void *handle, void *parg, void *rmm_handle,
+				const char *name, struct dbll_sym_val ** sym);
+
+/*
+ *  ======== dbll_tell_fxn ========
+ */
+typedef s32(*dbll_tell_fxn) (void *);
+
+/*
+ *  ======== dbll_write_fxn ========
+ *  Write memory function.  Write "n" HOST bytes of memory to segment "mtype"
+ *  starting at address "dsp_address" from the buffer "buf".  The buffer is
+ *  formatted as an array of words appropriate for the DSP.
+ */
+typedef s32(*dbll_write_fxn) (void *hdl, u32 dsp_address, void *buf,
+			      u32 n, s32 mtype);
+
+/*
+ *  ======== dbll_attrs ========
+ */
+struct dbll_attrs {
+	dbll_alloc_fxn alloc;
+	dbll_free_fxn free;
+	void *rmm_handle;	/* Handle to pass to alloc, free functions */
+	dbll_write_fxn write;
+	void *input_params;	/* Handle to pass to write, cinit function */
+	bool base_image;
+	dbll_log_write_fxn log_write;
+	void *log_write_handle;
+
+	/* Symbol matching function and handle to pass to it */
+	dbll_sym_lookup sym_lookup;
+	void *sym_handle;
+	void *sym_arg;
+
+	/*
+	 *  These file manipulation functions should be compatible with the
+	 *  "C" run time library functions of the same name.
+	 */
+	 s32(*fread) (void *, size_t, size_t, void *);
+	 s32(*fseek) (void *, long, int);
+	 s32(*ftell) (void *);
+	 s32(*fclose) (void *);
+	void *(*fopen) (const char *, const char *);
+};
+
+/*
+ *  ======== dbll_close ========
+ *  Close library opened with dbll_open.
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *  Returns:
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *  Ensures:
+ */
+typedef void (*dbll_close_fxn) (struct dbll_library_obj *library);
+
+/*
+ *  ======== dbll_create ========
+ *  Create a target object, specifying the alloc, free, and write functions.
+ *  Parameters:
+ *      target_obj         - Location to store target handle on output.
+ *      pattrs          - Attributes.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Memory allocation failed.
+ *  Requires:
+ *      DBL initialized.
+ *      pattrs != NULL.
+ *      target_obj != NULL;
+ *  Ensures:
+ *      Success:        *target_obj != NULL.
+ *      Failure:        *target_obj == NULL.
+ */
+typedef int(*dbll_create_fxn) (struct dbll_tar_obj **target_obj,
+				      struct dbll_attrs *attrs);
+
+/*
+ *  ======== dbll_delete ========
+ *  Delete target object and free resources for any loaded libraries.
+ *  Parameters:
+ *      target          - Handle returned from DBLL_Create().
+ *  Returns:
+ *  Requires:
+ *      DBL initialized.
+ *      Valid target.
+ *  Ensures:
+ */
+typedef void (*dbll_delete_fxn) (struct dbll_tar_obj *target);
+
+/*
+ *  ======== dbll_exit ========
+ *  Discontinue use of DBL module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      refs > 0.
+ *  Ensures:
+ *      refs >= 0.
+ */
+typedef void (*dbll_exit_fxn) (void);
+
+/*
+ *  ======== dbll_get_addr ========
+ *  Get address of name in the specified library.
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *      name            - Name of symbol
+ *      sym_val         - Location to store symbol address on output.
+ *  Returns:
+ *      TRUE:           Success.
+ *      FALSE:          Symbol not found.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid library.
+ *      name != NULL.
+ *      sym_val != NULL.
+ *  Ensures:
+ */
+typedef bool(*dbll_get_addr_fxn) (struct dbll_library_obj *lib, char *name,
+				  struct dbll_sym_val **sym_val);
+
+/*
+ *  ======== dbll_get_attrs ========
+ *  Retrieve the attributes of the target.
+ *  Parameters:
+ *      target          - Handle returned from DBLL_Create().
+ *      pattrs          - Location to store attributes on output.
+ *  Returns:
+ *  Requires:
+ *      DBL initialized.
+ *      Valid target.
+ *      pattrs != NULL.
+ *  Ensures:
+ */
+typedef void (*dbll_get_attrs_fxn) (struct dbll_tar_obj *target,
+				    struct dbll_attrs *attrs);
+
+/*
+ *  ======== dbll_get_c_addr ========
+ *  Get address of "C" name on the specified library.
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *      name            - Name of symbol
+ *      sym_val         - Location to store symbol address on output.
+ *  Returns:
+ *      TRUE:           Success.
+ *      FALSE:          Symbol not found.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid target.
+ *      name != NULL.
+ *      sym_val != NULL.
+ *  Ensures:
+ */
+typedef bool(*dbll_get_c_addr_fxn) (struct dbll_library_obj *lib, char *name,
+				    struct dbll_sym_val **sym_val);
+
+/*
+ *  ======== dbll_get_sect ========
+ *  Get address and size of a named section.
+ *  Parameters:
+ *      lib             - Library handle returned from dbll_open().
+ *      name            - Name of section.
+ *      paddr           - Location to store section address on output.
+ *      psize           - Location to store section size on output.
+ *  Returns:
+ *      0:        Success.
+ *      -ENXIO:    Section not found.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *      name != NULL.
+ *      paddr != NULL;
+ *      psize != NULL.
+ *  Ensures:
+ */
+typedef int(*dbll_get_sect_fxn) (struct dbll_library_obj *lib,
+					char *name, u32 * addr, u32 * size);
+
+/*
+ *  ======== dbll_init ========
+ *  Initialize DBL module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE:           Success.
+ *      FALSE:          Failure.
+ *  Requires:
+ *      refs >= 0.
+ *  Ensures:
+ *      Success:        refs > 0.
+ *      Failure:        refs >= 0.
+ */
+typedef bool(*dbll_init_fxn) (void);
+
+/*
+ *  ======== dbll_load ========
+ *  Load library onto the target.
+ *
+ *  Parameters:
+ *      lib             - Library handle returned from dbll_open().
+ *      flags           - Load code, data and/or symbols.
+ *      attrs           - May contain alloc, free, and write function.
+ *      entry_pt        - Location to store program entry on output.
+ *  Returns:
+ *      0:        Success.
+ *      -EBADF:     File read failed.
+ *      -EILSEQ:   Failure in dynamic loader library.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *      entry != NULL.
+ *  Ensures:
+ */
+typedef int(*dbll_load_fxn) (struct dbll_library_obj *lib,
+				    dbll_flags flags,
+				    struct dbll_attrs *attrs, u32 *entry);
+
+/*
+ *  ======== dbll_load_sect ========
+ *  Load a named section from an library (for overlay support).
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *      sec_name        - Name of section to load.
+ *      attrs           - Contains write function and handle to pass to it.
+ *  Returns:
+ *      0:        Success.
+ *      -ENXIO:    Section not found.
+ *      -ENOSYS:   Function not implemented.
+ *  Requires:
+ *      Valid lib.
+ *      sec_name != NULL.
+ *      attrs != NULL.
+ *      attrs->write != NULL.
+ *  Ensures:
+ */
+typedef int(*dbll_load_sect_fxn) (struct dbll_library_obj *lib,
+					 char *sz_sect_name,
+					 struct dbll_attrs *attrs);
+
+/*
+ *  ======== dbll_open ========
+ *  dbll_open() returns a library handle that can be used to load/unload
+ *  the symbols/code/data via dbll_load()/dbll_unload().
+ *  Parameters:
+ *      target          - Handle returned from dbll_create().
+ *      file            - Name of file to open.
+ *      flags           - If flags & DBLL_SYMB, load symbols.
+ *      lib_obj         - Location to store library handle on output.
+ *  Returns:
+ *      0:            Success.
+ *      -ENOMEM:        Memory allocation failure.
+ *      -EBADF:         File open/read failure.
+ *                      Unable to determine target type.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid target.
+ *      file != NULL.
+ *      lib_obj != NULL.
+ *      dbll_attrs fopen function non-NULL.
+ *  Ensures:
+ *      Success:        Valid *lib_obj.
+ *      Failure:        *lib_obj == NULL.
+ */
+typedef int(*dbll_open_fxn) (struct dbll_tar_obj *target, char *file,
+				    dbll_flags flags,
+				    struct dbll_library_obj **lib_obj);
+
+/*
+ *  ======== dbll_read_sect ========
+ *  Read COFF section into a character buffer.
+ *  Parameters:
+ *      lib             - Library handle returned from dbll_open().
+ *      name            - Name of section.
+ *      pbuf            - Buffer to write section contents into.
+ *      size            - Buffer size
+ *  Returns:
+ *      0:        Success.
+ *      -ENXIO:    Named section does not exists.
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *      name != NULL.
+ *      pbuf != NULL.
+ *      size != 0.
+ *  Ensures:
+ */
+typedef int(*dbll_read_sect_fxn) (struct dbll_library_obj *lib,
+					 char *name, char *content,
+					 u32 cont_size);
+
+/*
+ *  ======== dbll_set_attrs ========
+ *  Set the attributes of the target.
+ *  Parameters:
+ *      target          - Handle returned from dbll_create().
+ *      pattrs          - New attributes.
+ *  Returns:
+ *  Requires:
+ *      DBL initialized.
+ *      Valid target.
+ *      pattrs != NULL.
+ *  Ensures:
+ */
+typedef void (*dbll_set_attrs_fxn) (struct dbll_tar_obj *target,
+				    struct dbll_attrs *attrs);
+
+/*
+ *  ======== dbll_unload ========
+ *  Unload library loaded with dbll_load().
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *      attrs           - Contains free() function and handle to pass to it.
+ *  Returns:
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *  Ensures:
+ */
+typedef void (*dbll_unload_fxn) (struct dbll_library_obj *library,
+				 struct dbll_attrs *attrs);
+
+/*
+ *  ======== dbll_unload_sect ========
+ *  Unload a named section from an library (for overlay support).
+ *  Parameters:
+ *      lib             - Handle returned from dbll_open().
+ *      sec_name        - Name of section to load.
+ *      attrs           - Contains free() function and handle to pass to it.
+ *  Returns:
+ *      0:        Success.
+ *      -ENXIO:    Named section not found.
+ *      -ENOSYS
+ *  Requires:
+ *      DBL initialized.
+ *      Valid lib.
+ *      sec_name != NULL.
+ *  Ensures:
+ */
+typedef int(*dbll_unload_sect_fxn) (struct dbll_library_obj *lib,
+					   char *sz_sect_name,
+					   struct dbll_attrs *attrs);
+
+struct dbll_fxns {
+	dbll_close_fxn close_fxn;
+	dbll_create_fxn create_fxn;
+	dbll_delete_fxn delete_fxn;
+	dbll_exit_fxn exit_fxn;
+	dbll_get_attrs_fxn get_attrs_fxn;
+	dbll_get_addr_fxn get_addr_fxn;
+	dbll_get_c_addr_fxn get_c_addr_fxn;
+	dbll_get_sect_fxn get_sect_fxn;
+	dbll_init_fxn init_fxn;
+	dbll_load_fxn load_fxn;
+	dbll_load_sect_fxn load_sect_fxn;
+	dbll_open_fxn open_fxn;
+	dbll_read_sect_fxn read_sect_fxn;
+	dbll_set_attrs_fxn set_attrs_fxn;
+	dbll_unload_fxn unload_fxn;
+	dbll_unload_sect_fxn unload_sect_fxn;
+};
+
+#endif /* DBLDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dehdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dehdefs.h
new file mode 100644
index 00000000000..09f8bf83ab0
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dehdefs.h
@@ -0,0 +1,32 @@
+/*
+ * dehdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definition for Bridge driver module DEH.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DEHDEFS_
+#define DEHDEFS_
+
+#include <dspbridge/mbx_sh.h>	/* shared mailbox codes */
+
+/* DEH object manager */
+struct deh_mgr;
+
+/* Magic code used to determine if DSP signaled exception. */
+#define DEH_BASE        MBX_DEH_BASE
+#define DEH_USERS_BASE  MBX_DEH_USERS_BASE
+#define DEH_LIMIT       MBX_DEH_LIMIT
+
+#endif /* _DEHDEFS_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dev.h b/drivers/staging/tidspbridge/include/dspbridge/dev.h
new file mode 100644
index 00000000000..357458fadd2
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dev.h
@@ -0,0 +1,702 @@
+/*
+ * dev.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Bridge Bridge driver device operations.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DEV_
+#define DEV_
+
+/*  ----------------------------------- Module Dependent Headers */
+#include <dspbridge/chnldefs.h>
+#include <dspbridge/cmm.h>
+#include <dspbridge/cod.h>
+#include <dspbridge/dehdefs.h>
+#include <dspbridge/nodedefs.h>
+#include <dspbridge/dispdefs.h>
+#include <dspbridge/dspdefs.h>
+#include <dspbridge/dmm.h>
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/devdefs.h>
+
+/*
+ *  ======== dev_brd_write_fxn ========
+ *  Purpose:
+ *      Exported function to be used as the COD write function.  This function
+ *      is passed a handle to a DEV_hObject by ZL in arb, then calls the
+ *      device's bridge_brd_write() function.
+ *  Parameters:
+ *      arb:           Handle to a Device Object.
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      dsp_addr:       Address on DSP board (Destination).
+ *      host_buf:       Pointer to host buffer (Source).
+ *      ul_num_bytes:     Number of bytes to transfer.
+ *      mem_type:       Memory space on DSP to which to transfer.
+ *  Returns:
+ *      Number of bytes written.  Returns 0 if the DEV_hObject passed in via
+ *      arb is invalid.
+ *  Requires:
+ *      DEV Initialized.
+ *      host_buf != NULL
+ *  Ensures:
+ */
+extern u32 dev_brd_write_fxn(void *arb,
+			     u32 dsp_add,
+			     void *host_buf, u32 ul_num_bytes, u32 mem_space);
+
+/*
+ *  ======== dev_create_device ========
+ *  Purpose:
+ *      Called by the operating system to load the Bridge Driver for a
+ *      'Bridge device.
+ *  Parameters:
+ *      device_obj:     Ptr to location to receive the device object handle.
+ *      driver_file_name: Name of Bridge driver PE DLL file to load.  If the
+ *                      absolute path is not provided, the file is loaded
+ *                      through 'Bridge's module search path.
+ *      host_config:    Host configuration information, to be passed down
+ *                      to the Bridge driver when bridge_dev_create() is called.
+ *      pDspConfig:     DSP resources, to be passed down to the Bridge driver
+ *                      when bridge_dev_create() is called.
+ *      dev_node_obj:       Platform specific device node.
+ *  Returns:
+ *      0:            Module is loaded, device object has been created
+ *      -ENOMEM:        Insufficient memory to create needed resources.
+ *      -EPERM:              Unable to find Bridge driver entry point function.
+ *      -ESPIPE:   Unable to load ZL DLL.
+ *  Requires:
+ *      DEV Initialized.
+ *      device_obj != NULL.
+ *      driver_file_name != NULL.
+ *      host_config != NULL.
+ *      pDspConfig != NULL.
+ *  Ensures:
+ *      0:  *device_obj will contain handle to the new device object.
+ *      Otherwise, does not create the device object, ensures the Bridge driver
+ *      module is unloaded, and sets *device_obj to NULL.
+ */
+extern int dev_create_device(struct dev_object
+				    **device_obj,
+				    const char *driver_file_name,
+				    struct cfg_devnode *dev_node_obj);
+
+/*
+ *  ======== dev_create_iva_device ========
+ *  Purpose:
+ *      Called by the operating system to load the Bridge Driver for IVA.
+ *  Parameters:
+ *      device_obj:     Ptr to location to receive the device object handle.
+ *      driver_file_name: Name of Bridge driver PE DLL file to load.  If the
+ *                      absolute path is not provided, the file is loaded
+ *                      through 'Bridge's module search path.
+ *      host_config:    Host configuration information, to be passed down
+ *                      to the Bridge driver when bridge_dev_create() is called.
+ *      pDspConfig:     DSP resources, to be passed down to the Bridge driver
+ *                      when bridge_dev_create() is called.
+ *      dev_node_obj:       Platform specific device node.
+ *  Returns:
+ *      0:            Module is loaded, device object has been created
+ *      -ENOMEM:        Insufficient memory to create needed resources.
+ *      -EPERM:              Unable to find Bridge driver entry point function.
+ *      -ESPIPE:   Unable to load ZL DLL.
+ *  Requires:
+ *      DEV Initialized.
+ *      device_obj != NULL.
+ *      driver_file_name != NULL.
+ *      host_config != NULL.
+ *      pDspConfig != NULL.
+ *  Ensures:
+ *      0:  *device_obj will contain handle to the new device object.
+ *      Otherwise, does not create the device object, ensures the Bridge driver
+ *      module is unloaded, and sets *device_obj to NULL.
+ */
+extern int dev_create_iva_device(struct dev_object
+					**device_obj,
+					const char *driver_file_name,
+					const struct cfg_hostres
+					*host_config,
+					struct cfg_devnode *dev_node_obj);
+
+/*
+ *  ======== dev_create2 ========
+ *  Purpose:
+ *      After successful loading of the image from api_init_complete2
+ *      (PROC Auto_Start) or proc_load this fxn is called. This creates
+ *      the Node Manager and updates the DEV Object.
+ *  Parameters:
+ *      hdev_obj: Handle to device object created with dev_create_device().
+ *  Returns:
+ *      0:    Successful Creation of Node Manager
+ *      -EPERM:  Some Error Occurred.
+ *  Requires:
+ *      DEV Initialized
+ *      Valid hdev_obj
+ *  Ensures:
+ *      0 and hdev_obj->hnode_mgr != NULL
+ *      else    hdev_obj->hnode_mgr == NULL
+ */
+extern int dev_create2(struct dev_object *hdev_obj);
+
+/*
+ *  ======== dev_destroy2 ========
+ *  Purpose:
+ *      Destroys the Node manager for this device.
+ *  Parameters:
+ *      hdev_obj: Handle to device object created with dev_create_device().
+ *  Returns:
+ *      0:    Successful Creation of Node Manager
+ *      -EPERM:  Some Error Occurred.
+ *  Requires:
+ *      DEV Initialized
+ *      Valid hdev_obj
+ *  Ensures:
+ *      0 and hdev_obj->hnode_mgr == NULL
+ *      else    -EPERM.
+ */
+extern int dev_destroy2(struct dev_object *hdev_obj);
+
+/*
+ *  ======== dev_destroy_device ========
+ *  Purpose:
+ *      Destroys the channel manager for this device, if any, calls
+ *      bridge_dev_destroy(), and then attempts to unload the Bridge module.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *      -EPERM:     The Bridge driver failed it's bridge_dev_destroy() function.
+ *  Requires:
+ *      DEV Initialized.
+ *  Ensures:
+ */
+extern int dev_destroy_device(struct dev_object
+				     *hdev_obj);
+
+/*
+ *  ======== dev_get_chnl_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the channel manager created for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to a channel manager object,
+ *                      or NULL.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_chnl_mgr(struct dev_object *hdev_obj,
+				   struct chnl_mgr **mgr);
+
+/*
+ *  ======== dev_get_cmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the shared memory manager created for this
+ *      device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to a channel manager object,
+ *                      or NULL.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_cmm_mgr(struct dev_object *hdev_obj,
+				  struct cmm_object **mgr);
+
+/*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to a channel manager object,
+ *                      or NULL.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+				  struct dmm_object **mgr);
+
+/*
+ *  ======== dev_get_cod_mgr ========
+ *  Purpose:
+ *      Retrieve the COD manager create for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *cod_mgr:       Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      cod_mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *cod_mgr contains a handle to a COD manager object.
+ *      else:           *cod_mgr is NULL.
+ */
+extern int dev_get_cod_mgr(struct dev_object *hdev_obj,
+				  struct cod_manager **cod_mgr);
+
+/*
+ *  ======== dev_get_deh_mgr ========
+ *  Purpose:
+ *      Retrieve the DEH manager created for this device.
+ *  Parameters:
+ *      hdev_obj: Handle to device object created with dev_create_device().
+ *      *deh_manager:  Ptr to location to store handle.
+ *  Returns:
+ *      0:    Success.
+ *      -EFAULT:   Invalid hdev_obj.
+ *  Requires:
+ *      deh_manager != NULL.
+ *      DEH Initialized.
+ *  Ensures:
+ *      0:    *deh_manager contains a handle to a DEH manager object.
+ *      else:       *deh_manager is NULL.
+ */
+extern int dev_get_deh_mgr(struct dev_object *hdev_obj,
+				  struct deh_mgr **deh_manager);
+
+/*
+ *  ======== dev_get_dev_node ========
+ *  Purpose:
+ *      Retrieve the platform specific device ID for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      dev_nde:        Ptr to location to get the device node handle.
+ *  Returns:
+ *      0:        Returns a DEVNODE in *dev_node_obj.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      dev_nde != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *dev_nde contains a platform specific device ID;
+ *      else:           *dev_nde is NULL.
+ */
+extern int dev_get_dev_node(struct dev_object *hdev_obj,
+				   struct cfg_devnode **dev_nde);
+
+/*
+ *  ======== dev_get_dev_type ========
+ *  Purpose:
+ *      Retrieve the platform specific device ID for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      dev_nde:        Ptr to location to get the device node handle.
+ *  Returns:
+ *      0:        Success
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      dev_nde != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *dev_nde contains a platform specific device ID;
+ *      else:           *dev_nde is NULL.
+ */
+extern int dev_get_dev_type(struct dev_object *device_obj,
+					u8 *dev_type);
+
+/*
+ *  ======== dev_get_first ========
+ *  Purpose:
+ *      Retrieve the first Device Object handle from an internal linked list of
+ *      of DEV_OBJECTs maintained by DEV.
+ *  Parameters:
+ *  Returns:
+ *      NULL if there are no device objects stored; else
+ *      a valid DEV_HOBJECT.
+ *  Requires:
+ *      No calls to dev_create_device or dev_destroy_device (which my modify the
+ *      internal device object list) may occur between calls to dev_get_first
+ *      and dev_get_next.
+ *  Ensures:
+ *      The DEV_HOBJECT returned is valid.
+ *      A subsequent call to dev_get_next will return the next device object in
+ *      the list.
+ */
+extern struct dev_object *dev_get_first(void);
+
+/*
+ *  ======== dev_get_intf_fxns ========
+ *  Purpose:
+ *      Retrieve the Bridge driver interface function structure for the
+ *      loaded Bridge driver.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *if_fxns:       Ptr to location to store fxn interface.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      if_fxns != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *if_fxns contains a pointer to the Bridge
+ *                      driver interface;
+ *      else:           *if_fxns is NULL.
+ */
+extern int dev_get_intf_fxns(struct dev_object *hdev_obj,
+			    struct bridge_drv_interface **if_fxns);
+
+/*
+ *  ======== dev_get_io_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the IO manager created for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to an IO manager object.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_io_mgr(struct dev_object *hdev_obj,
+				 struct io_mgr **mgr);
+
+/*
+ *  ======== dev_get_next ========
+ *  Purpose:
+ *      Retrieve the next Device Object handle from an internal linked list of
+ *      of DEV_OBJECTs maintained by DEV, after having previously called
+ *      dev_get_first() and zero or more dev_get_next
+ *  Parameters:
+ *      hdev_obj: Handle to the device object returned from a previous
+ *                  call to dev_get_first() or dev_get_next().
+ *  Returns:
+ *      NULL if there are no further device objects on the list or hdev_obj
+ *      was invalid;
+ *      else the next valid DEV_HOBJECT in the list.
+ *  Requires:
+ *      No calls to dev_create_device or dev_destroy_device (which my modify the
+ *      internal device object list) may occur between calls to dev_get_first
+ *      and dev_get_next.
+ *  Ensures:
+ *      The DEV_HOBJECT returned is valid.
+ *      A subsequent call to dev_get_next will return the next device object in
+ *      the list.
+ */
+extern struct dev_object *dev_get_next(struct dev_object
+				       *hdev_obj);
+
+/*
+ *  ========= dev_get_msg_mgr ========
+ *  Purpose:
+ *      Retrieve the msg_ctrl Manager Handle from the DevObject.
+ *  Parameters:
+ *      hdev_obj: Handle to the Dev Object
+ *      msg_man:    Location where msg_ctrl Manager handle will be returned.
+ *  Returns:
+ *  Requires:
+ *      DEV Initialized.
+ *      Valid hdev_obj.
+ *      node_man != NULL.
+ *  Ensures:
+ */
+extern void dev_get_msg_mgr(struct dev_object *hdev_obj,
+			    struct msg_mgr **msg_man);
+
+/*
+ *  ========= dev_get_node_manager ========
+ *  Purpose:
+ *      Retrieve the Node Manager Handle from the DevObject. It is an
+ *      accessor function
+ *  Parameters:
+ *      hdev_obj:     Handle to the Dev Object
+ *      node_man:       Location where Handle to the Node Manager will be
+ *                      returned..
+ *  Returns:
+ *      0:        Success
+ *      -EFAULT:    Invalid Dev Object handle.
+ *  Requires:
+ *      DEV Initialized.
+ *      node_man is not null
+ *  Ensures:
+ *      0:        *node_man contains a handle to a Node manager object.
+ *      else:           *node_man is NULL.
+ */
+extern int dev_get_node_manager(struct dev_object
+				       *hdev_obj,
+				       struct node_mgr **node_man);
+
+/*
+ *  ======== dev_get_symbol ========
+ *  Purpose:
+ *      Get the value of a symbol in the currently loaded program.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      str_sym:        Name of symbol to look up.
+ *      pul_value:       Ptr to symbol value.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *      -ESPIPE: Symbols couldn not be found or have not been loaded onto
+ *               the board.
+ *  Requires:
+ *      str_sym != NULL.
+ *      pul_value != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *pul_value contains the symbol value;
+ */
+extern int dev_get_symbol(struct dev_object *hdev_obj,
+				 const char *str_sym, u32 * pul_value);
+
+/*
+ *  ======== dev_get_bridge_context ========
+ *  Purpose:
+ *      Retrieve the Bridge Context handle, as returned by the
+ *      bridge_dev_create fxn.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with dev_create_device()
+ *      *phbridge_context:  Ptr to location to store context handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      phbridge_context != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *phbridge_context contains context handle;
+ *      else:           *phbridge_context is NULL;
+ */
+extern int dev_get_bridge_context(struct dev_object *hdev_obj,
+				      struct bridge_dev_context
+				      **phbridge_context);
+
+/*
+ *  ======== dev_exit ========
+ *  Purpose:
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      DEV is initialized.
+ *  Ensures:
+ *      When reference count == 0, DEV's private resources are freed.
+ */
+extern void dev_exit(void);
+
+/*
+ *  ======== dev_init ========
+ *  Purpose:
+ *      Initialize DEV's private state, keeping a reference count on each call.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      TRUE: A requirement for the other public DEV functions.
+ */
+extern bool dev_init(void);
+
+/*
+ *  ======== dev_is_locked ========
+ *  Purpose:
+ *      Predicate function to determine if the device has been
+ *      locked by a client for exclusive access.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *  Returns:
+ *      0:        TRUE: device has been locked.
+ *      0:     FALSE: device not locked.
+ *      -EFAULT:    hdev_obj was invalid.
+ *  Requires:
+ *      DEV Initialized.
+ *  Ensures:
+ */
+extern int dev_is_locked(struct dev_object *hdev_obj);
+
+/*
+ *  ======== dev_insert_proc_object ========
+ *  Purpose:
+ *      Inserts the Processor Object into the List of PROC Objects
+ *      kept in the DEV Object
+ *  Parameters:
+ *      proc_obj:    Handle to the Proc Object
+ *      hdev_obj      Handle to the Dev Object
+ *      bAttachedNew    Specifies if there are already processors attached
+ *  Returns:
+ *      0:        Successfully inserted into the list
+ *  Requires:
+ *      proc_obj is not NULL
+ *      hdev_obj is a valid handle to the DEV.
+ *      DEV Initialized.
+ *      List(of Proc object in Dev) Exists.
+ *  Ensures:
+ *      0 & the PROC Object is inserted and the list is not empty
+ *  Details:
+ *      If the List of Proc Object is empty bAttachedNew is TRUE, it indicated
+ *      this is the first Processor attaching.
+ *      If it is False, there are already processors attached.
+ */
+extern int dev_insert_proc_object(struct dev_object
+					 *hdev_obj,
+					 u32 proc_obj,
+					 bool *already_attached);
+
+/*
+ *  ======== dev_remove_proc_object ========
+ *  Purpose:
+ *      Search for and remove a Proc object from the given list maintained
+ *      by the DEV
+ *  Parameters:
+ *      p_proc_object:        Ptr to ProcObject to insert.
+ *      dev_obj:         Ptr to Dev Object where the list is.
+ *      already_attached:  Ptr to return the bool
+ *  Returns:
+ *      0:            If successful.
+ *      -EPERM           Failure to Remove the PROC Object from the list
+ *  Requires:
+ *      DevObject is Valid
+ *      proc_obj != 0
+ *      dev_obj->proc_list != NULL
+ *      !LST_IS_EMPTY(dev_obj->proc_list)
+ *      already_attached !=NULL
+ *  Ensures:
+ *  Details:
+ *      List will be deleted when the DEV is destroyed.
+ *
+ */
+extern int dev_remove_proc_object(struct dev_object
+					 *hdev_obj, u32 proc_obj);
+
+/*
+ *  ======== dev_notify_clients ========
+ *  Purpose:
+ *      Notify all clients of this device of a change in device status.
+ *      Clients may include multiple users of BRD, as well as CHNL.
+ *      This function is asychronous, and may be called by a timer event
+ *      set up by a watchdog timer.
+ *  Parameters:
+ *      hdev_obj:  Handle to device object created with dev_create_device().
+ *      ret:         A status word, most likely a BRD_STATUS.
+ *  Returns:
+ *      0:     All registered clients were asynchronously notified.
+ *      -EINVAL:   Invalid hdev_obj.
+ *  Requires:
+ *      DEV Initialized.
+ *  Ensures:
+ *      0: Notifications are queued by the operating system to be
+ *      delivered to clients.  This function does not ensure that
+ *      the notifications will ever be delivered.
+ */
+extern int dev_notify_clients(struct dev_object *hdev_obj, u32 ret);
+
+/*
+ *  ======== dev_remove_device ========
+ *  Purpose:
+ *      Destroys the Device Object created by dev_start_device.
+ *  Parameters:
+ *      dev_node_obj:       Device node as it is know to OS.
+ *  Returns:
+ *      0:        If success;
+ *      <error code>    Otherwise.
+ *  Requires:
+ *  Ensures:
+ */
+extern int dev_remove_device(struct cfg_devnode *dev_node_obj);
+
+/*
+ *  ======== dev_set_chnl_mgr ========
+ *  Purpose:
+ *      Set the channel manager for this device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      hmgr:           Handle to a channel manager, or NULL.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      DEV Initialized.
+ *  Ensures:
+ */
+extern int dev_set_chnl_mgr(struct dev_object *hdev_obj,
+				   struct chnl_mgr *hmgr);
+
+/*
+ *  ======== dev_set_msg_mgr ========
+ *  Purpose:
+ *      Set the Message manager for this device.
+ *  Parameters:
+ *      hdev_obj: Handle to device object created with dev_create_device().
+ *      hmgr:       Handle to a message manager, or NULL.
+ *  Returns:
+ *  Requires:
+ *      DEV Initialized.
+ *  Ensures:
+ */
+extern void dev_set_msg_mgr(struct dev_object *hdev_obj, struct msg_mgr *hmgr);
+
+/*
+ *  ======== dev_start_device ========
+ *  Purpose:
+ *      Initializes the new device with bridge environment.  This involves
+ *      querying CM for allocated resources, querying the registry for
+ *      necessary dsp resources (requested in the INF file), and using this
+ *      information to create a bridge device object.
+ *  Parameters:
+ *      dev_node_obj:       Device node as it is know to OS.
+ *  Returns:
+ *      0:        If success;
+ *      <error code>    Otherwise.
+ *  Requires:
+ *      DEV initialized.
+ *  Ensures:
+ */
+extern int dev_start_device(struct cfg_devnode *dev_node_obj);
+
+#endif /* DEV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/devdefs.h b/drivers/staging/tidspbridge/include/dspbridge/devdefs.h
new file mode 100644
index 00000000000..a2f9241ff13
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/devdefs.h
@@ -0,0 +1,26 @@
+/*
+ * devdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definition of common include typedef between dspdefs.h and dev.h. Required
+ * to break circular dependency between Bridge driver and DEV include files.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DEVDEFS_
+#define DEVDEFS_
+
+/* Bridge Device Object */
+struct dev_object;
+
+#endif /* DEVDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/disp.h b/drivers/staging/tidspbridge/include/dspbridge/disp.h
new file mode 100644
index 00000000000..82bf721447a
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/disp.h
@@ -0,0 +1,204 @@
+/*
+ * disp.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Node Dispatcher.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DISP_
+#define DISP_
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/nodedefs.h>
+#include <dspbridge/nodepriv.h>
+#include <dspbridge/dispdefs.h>
+
+/*
+ *  ======== disp_create ========
+ *  Create a NODE Dispatcher object. This object handles the creation,
+ *  deletion, and execution of nodes on the DSP target, through communication
+ *  with the Resource Manager Server running on the target. Each NODE
+ *  Manager object should have exactly one NODE Dispatcher.
+ *
+ *  Parameters:
+ *      dispatch_obj:   Location to store node dispatcher object on output.
+ *      hdev_obj:     Device for this processor.
+ *      disp_attrs:     Node dispatcher attributes.
+ *  Returns:
+ *      0:                Success;
+ *      -ENOMEM:            Insufficient memory for requested resources.
+ *      -EPERM:              Unable to create dispatcher.
+ *  Requires:
+ *      disp_init(void) called.
+ *      disp_attrs != NULL.
+ *      hdev_obj != NULL.
+ *      dispatch_obj != NULL.
+ *  Ensures:
+ *      0:        IS_VALID(*dispatch_obj).
+ *      error:          *dispatch_obj == NULL.
+ */
+extern int disp_create(struct disp_object **dispatch_obj,
+			      struct dev_object *hdev_obj,
+			      const struct disp_attr *disp_attrs);
+
+/*
+ *  ======== disp_delete ========
+ *  Delete the NODE Dispatcher.
+ *
+ *  Parameters:
+ *      disp_obj:  Node Dispatcher object.
+ *  Returns:
+ *  Requires:
+ *      disp_init(void) called.
+ *      Valid disp_obj.
+ *  Ensures:
+ *      disp_obj is invalid.
+ */
+extern void disp_delete(struct disp_object *disp_obj);
+
+/*
+ *  ======== disp_exit ========
+ *  Discontinue usage of DISP module.
+ *
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      disp_init(void) previously called.
+ *  Ensures:
+ *      Any resources acquired in disp_init(void) will be freed when last DISP
+ *      client calls disp_exit(void).
+ */
+extern void disp_exit(void);
+
+/*
+ *  ======== disp_init ========
+ *  Initialize the DISP module.
+ *
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialization succeeded, FALSE otherwise.
+ *  Ensures:
+ */
+extern bool disp_init(void);
+
+/*
+ *  ======== disp_node_change_priority ========
+ *  Change the priority of a node currently running on the target.
+ *
+ *  Parameters:
+ *      disp_obj:            Node Dispatcher object.
+ *      hnode:                  Node object representing a node currently
+ *                              allocated or running on the DSP.
+ *      ulFxnAddress:           Address of RMS function for changing priority.
+ *      node_env:                Address of node's environment structure.
+ *      prio:              New priority level to set node's priority to.
+ *  Returns:
+ *      0:                Success.
+ *      -ETIME:           A timeout occurred before the DSP responded.
+ *  Requires:
+ *      disp_init(void) called.
+ *      Valid disp_obj.
+ *      hnode != NULL.
+ *  Ensures:
+ */
+extern int disp_node_change_priority(struct disp_object
+					    *disp_obj,
+					    struct node_object *hnode,
+					    u32 rms_fxn,
+					    nodeenv node_env, s32 prio);
+
+/*
+ *  ======== disp_node_create ========
+ *  Create a node on the DSP by remotely calling the node's create function.
+ *
+ *  Parameters:
+ *      disp_obj:    Node Dispatcher object.
+ *      hnode:          Node handle obtained from node_allocate().
+ *      ul_fxn_addr:      Address or RMS create node function.
+ *      ul_create_fxn:    Address of node's create function.
+ *      pargs:          Arguments to pass to RMS node create function.
+ *      node_env:       Location to store node environment pointer on
+ *                      output.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIME:   A timeout occurred before the DSP responded.
+ *      -EPERM:      A failure occurred, unable to create node.
+ *  Requires:
+ *      disp_init(void) called.
+ *      Valid disp_obj.
+ *      pargs != NULL.
+ *      hnode != NULL.
+ *      node_env != NULL.
+ *      node_get_type(hnode) != NODE_DEVICE.
+ *  Ensures:
+ */
+extern int disp_node_create(struct disp_object *disp_obj,
+				   struct node_object *hnode,
+				   u32 rms_fxn,
+				   u32 ul_create_fxn,
+				   const struct node_createargs
+				   *pargs, nodeenv *node_env);
+
+/*
+ *  ======== disp_node_delete ========
+ *  Delete a node on the DSP by remotely calling the node's delete function.
+ *
+ *  Parameters:
+ *      disp_obj:    Node Dispatcher object.
+ *      hnode:          Node object representing a node currently
+ *                      loaded on the DSP.
+ *      ul_fxn_addr:      Address or RMS delete node function.
+ *      ul_delete_fxn:    Address of node's delete function.
+ *      node_env:        Address of node's environment structure.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIME:   A timeout occurred before the DSP responded.
+ *  Requires:
+ *      disp_init(void) called.
+ *      Valid disp_obj.
+ *      hnode != NULL.
+ *  Ensures:
+ */
+extern int disp_node_delete(struct disp_object *disp_obj,
+				   struct node_object *hnode,
+				   u32 rms_fxn,
+				   u32 ul_delete_fxn, nodeenv node_env);
+
+/*
+ *  ======== disp_node_run ========
+ *  Start execution of a node's execute phase, or resume execution of a node
+ *  that has been suspended (via DISP_NodePause()) on the DSP.
+ *
+ *  Parameters:
+ *      disp_obj:    Node Dispatcher object.
+ *      hnode:          Node object representing a node to be executed
+ *                      on the DSP.
+ *      ul_fxn_addr:      Address or RMS node execute function.
+ *      ul_execute_fxn:   Address of node's execute function.
+ *      node_env:        Address of node's environment structure.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIME:   A timeout occurred before the DSP responded.
+ *  Requires:
+ *      disp_init(void) called.
+ *      Valid disp_obj.
+ *      hnode != NULL.
+ *  Ensures:
+ */
+extern int disp_node_run(struct disp_object *disp_obj,
+				struct node_object *hnode,
+				u32 rms_fxn,
+				u32 ul_execute_fxn, nodeenv node_env);
+
+#endif /* DISP_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dispdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dispdefs.h
new file mode 100644
index 00000000000..946551a3dbb
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dispdefs.h
@@ -0,0 +1,35 @@
+/*
+ * dispdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global DISP constants and types, shared by PROCESSOR, NODE, and DISP.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DISPDEFS_
+#define DISPDEFS_
+
+struct disp_object;
+
+/* Node Dispatcher attributes */
+struct disp_attr {
+	u32 ul_chnl_offset;	/* Offset of channel ids reserved for RMS */
+	/* Size of buffer for sending data to RMS */
+	u32 ul_chnl_buf_size;
+	int proc_family;	/* eg, 5000 */
+	int proc_type;		/* eg, 5510 */
+	void *reserved1;	/* Reserved for future use. */
+	u32 reserved2;		/* Reserved for future use. */
+};
+
+#endif /* DISPDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dmm.h b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
new file mode 100644
index 00000000000..6c58335c5f6
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
@@ -0,0 +1,75 @@
+/*
+ * dmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Mapping(DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DMM_
+#define DMM_
+
+#include <dspbridge/dbdefs.h>
+
+struct dmm_object;
+
+/* DMM attributes used in dmm_create() */
+struct dmm_mgrattrs {
+	u32 reserved;
+};
+
+#define DMMPOOLSIZE      0x4000000
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+
+extern int dmm_get_handle(void *hprocessor,
+				 struct dmm_object **dmm_manager);
+
+extern int dmm_reserve_memory(struct dmm_object *dmm_mgr,
+				     u32 size, u32 *prsv_addr);
+
+extern int dmm_un_reserve_memory(struct dmm_object *dmm_mgr,
+					u32 rsv_addr);
+
+extern int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr,
+				 u32 size);
+
+extern int dmm_un_map_memory(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 *psize);
+
+extern int dmm_destroy(struct dmm_object *dmm_mgr);
+
+extern int dmm_delete_tables(struct dmm_object *dmm_mgr);
+
+extern int dmm_create(struct dmm_object **dmm_manager,
+			     struct dev_object *hdev_obj,
+			     const struct dmm_mgrattrs *mgr_attrts);
+
+extern bool dmm_init(void);
+
+extern void dmm_exit(void);
+
+extern int dmm_create_tables(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 size);
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr);
+#endif
+
+#endif /* DMM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
new file mode 100644
index 00000000000..f3650153ef3
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -0,0 +1,521 @@
+/*
+ * drv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DRV Resource allocation module. Driver Object gets Created
+ * at the time of Loading. It holds the List of Device Objects
+ * in the system.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DRV_
+#define DRV_
+
+#include <dspbridge/devdefs.h>
+
+#include <dspbridge/drvdefs.h>
+#include <linux/idr.h>
+
+#define DRV_ASSIGN     1
+#define DRV_RELEASE    0
+
+/* Provide the DSP Internal memory windows that can be accessed from L3 address
+ * space */
+
+#define OMAP_GEM_BASE   0x107F8000
+#define OMAP_DSP_SIZE   0x00720000
+
+/* MEM1 is L2 RAM + L2 Cache space */
+#define OMAP_DSP_MEM1_BASE 0x5C7F8000
+#define OMAP_DSP_MEM1_SIZE 0x18000
+#define OMAP_DSP_GEM1_BASE 0x107F8000
+
+/* MEM2 is L1P RAM/CACHE space */
+#define OMAP_DSP_MEM2_BASE 0x5CE00000
+#define OMAP_DSP_MEM2_SIZE 0x8000
+#define OMAP_DSP_GEM2_BASE 0x10E00000
+
+/* MEM3 is L1D RAM/CACHE space */
+#define OMAP_DSP_MEM3_BASE 0x5CF04000
+#define OMAP_DSP_MEM3_SIZE 0x14000
+#define OMAP_DSP_GEM3_BASE 0x10F04000
+
+#define OMAP_IVA2_PRM_BASE 0x48306000
+#define OMAP_IVA2_PRM_SIZE 0x1000
+
+#define OMAP_IVA2_CM_BASE 0x48004000
+#define OMAP_IVA2_CM_SIZE 0x1000
+
+#define OMAP_PER_CM_BASE 0x48005000
+#define OMAP_PER_CM_SIZE 0x1000
+
+#define OMAP_PER_PRM_BASE 0x48307000
+#define OMAP_PER_PRM_SIZE 0x1000
+
+#define OMAP_CORE_PRM_BASE 0x48306A00
+#define OMAP_CORE_PRM_SIZE 0x1000
+
+#define OMAP_SYSC_BASE 0x48002000
+#define OMAP_SYSC_SIZE 0x1000
+
+#define OMAP_DMMU_BASE 0x5D000000
+#define OMAP_DMMU_SIZE 0x1000
+
+#define OMAP_PRCM_VDD1_DOMAIN 1
+#define OMAP_PRCM_VDD2_DOMAIN 2
+
+/* GPP PROCESS CLEANUP Data structures */
+
+/* New structure (member of process context) abstracts NODE resource info */
+struct node_res_object {
+	void *hnode;
+	s32 node_allocated;	/* Node status */
+	s32 heap_allocated;	/* Heap status */
+	s32 streams_allocated;	/* Streams status */
+	int id;
+};
+
+/* used to cache dma mapping information */
+struct bridge_dma_map_info {
+	/* direction of DMA in action, or DMA_NONE */
+	enum dma_data_direction dir;
+	/* number of elements requested by us */
+	int num_pages;
+	/* number of elements returned from dma_map_sg */
+	int sg_num;
+	/* list of buffers used in this DMA action */
+	struct scatterlist *sg;
+};
+
+/* Used for DMM mapped memory accounting */
+struct dmm_map_object {
+	struct list_head link;
+	u32 dsp_addr;
+	u32 mpu_addr;
+	u32 size;
+	u32 num_usr_pgs;
+	struct page **pages;
+	struct bridge_dma_map_info dma_info;
+};
+
+/* Used for DMM reserved memory accounting */
+struct dmm_rsv_object {
+	struct list_head link;
+	u32 dsp_reserved_addr;
+};
+
+/* New structure (member of process context) abstracts DMM resource info */
+struct dspheap_res_object {
+	s32 heap_allocated;	/* DMM status */
+	u32 ul_mpu_addr;
+	u32 ul_dsp_addr;
+	u32 ul_dsp_res_addr;
+	u32 heap_size;
+	void *hprocessor;
+	struct dspheap_res_object *next;
+};
+
+/* New structure (member of process context) abstracts stream resource info */
+struct strm_res_object {
+	s32 stream_allocated;	/* Stream status */
+	void *hstream;
+	u32 num_bufs;
+	u32 dir;
+	int id;
+};
+
+/* Overall Bridge process resource usage state */
+enum gpp_proc_res_state {
+	PROC_RES_ALLOCATED,
+	PROC_RES_FREED
+};
+
+/* Bridge Data */
+struct drv_data {
+	char *base_img;
+	s32 shm_size;
+	int tc_wordswapon;
+	void *drv_object;
+	void *dev_object;
+	void *mgr_object;
+};
+
+/* Process Context */
+struct process_context {
+	/* Process State */
+	enum gpp_proc_res_state res_state;
+
+	/* Handle to Processor */
+	void *hprocessor;
+
+	/* DSP Node resources */
+	struct idr *node_id;
+
+	/* DMM mapped memory resources */
+	struct list_head dmm_map_list;
+	spinlock_t dmm_map_lock;
+
+	/* DMM reserved memory resources */
+	struct list_head dmm_rsv_list;
+	spinlock_t dmm_rsv_lock;
+
+	/* DSP Heap resources */
+	struct dspheap_res_object *pdspheap_list;
+
+	/* Stream resources */
+	struct idr *stream_id;
+};
+
+/*
+ *  ======== drv_create ========
+ *  Purpose:
+ *      Creates the Driver Object. This is done during the driver loading.
+ *      There is only one Driver Object in the DSP/BIOS Bridge.
+ *  Parameters:
+ *      drv_obj:        Location to store created DRV Object handle.
+ *  Returns:
+ *      0:        Sucess
+ *      -ENOMEM:    Failed in Memory allocation
+ *      -EPERM:      General Failure
+ *  Requires:
+ *      DRV Initialized (refs > 0 )
+ *      drv_obj != NULL.
+ *  Ensures:
+ *      0:        - *drv_obj is a valid DRV interface to the device.
+ *                      - List of DevObject Created and Initialized.
+ *                      - List of dev_node String created and intialized.
+ *                      - Registry is updated with the DRV Object.
+ *      !0:       DRV Object not created
+ *  Details:
+ *      There is one Driver Object for the Driver representing
+ *      the driver itself. It contains the list of device
+ *      Objects and the list of Device Extensions in the system.
+ *      Also it can hold other neccessary
+ *      information in its storage area.
+ */
+extern int drv_create(struct drv_object **drv_obj);
+
+/*
+ *  ======== drv_destroy ========
+ *  Purpose:
+ *      destroys the Dev Object list, DrvExt list
+ *      and destroy the DRV object
+ *      Called upon driver unLoading.or unsuccesful loading of the driver.
+ *  Parameters:
+ *      driver_obj:     Handle to Driver object .
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Failed to destroy DRV Object
+ *  Requires:
+ *      DRV Initialized (cRegs > 0 )
+ *      hdrv_obj is not NULL and a valid DRV handle .
+ *      List of DevObject is Empty.
+ *      List of DrvExt is Empty
+ *  Ensures:
+ *      0:        - DRV Object destroyed and hdrv_obj is not a valid
+ *                        DRV handle.
+ *                      - Registry is updated with "0" as the DRV Object.
+ */
+extern int drv_destroy(struct drv_object *driver_obj);
+
+/*
+ *  ======== drv_exit ========
+ *  Purpose:
+ *      Exit the DRV module, freeing any modules initialized in drv_init.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *  Ensures:
+ */
+extern void drv_exit(void);
+
+/*
+ *  ======== drv_get_first_dev_object ========
+ *  Purpose:
+ *      Returns the Ptr to the FirstDev Object in the List
+ *  Parameters:
+ *  Requires:
+ *      DRV Initialized
+ *  Returns:
+ *      dw_dev_object:  Ptr to the First Dev Object as a u32
+ *      0 if it fails to retrieve the First Dev Object
+ *  Ensures:
+ */
+extern u32 drv_get_first_dev_object(void);
+
+/*
+ *  ======== drv_get_first_dev_extension ========
+ *  Purpose:
+ *      Returns the Ptr to the First Device Extension in the List
+ *  Parameters:
+ *  Requires:
+ *      DRV Initialized
+ *  Returns:
+ *      dw_dev_extension:     Ptr to the First Device Extension as a u32
+ *      0:                  Failed to Get the Device Extension
+ *  Ensures:
+ */
+extern u32 drv_get_first_dev_extension(void);
+
+/*
+ *  ======== drv_get_dev_object ========
+ *  Purpose:
+ *      Given a index, returns a handle to DevObject from the list
+ *  Parameters:
+ *      hdrv_obj:     Handle to the Manager
+ *      device_obj:     Location to store the Dev Handle
+ *  Requires:
+ *      DRV Initialized
+ *      index >= 0
+ *      hdrv_obj is not NULL and Valid DRV Object
+ *      device_obj is not NULL
+ *      Device Object List not Empty
+ *  Returns:
+ *      0:        Success
+ *      -EPERM:      Failed to Get the Dev Object
+ *  Ensures:
+ *      0:        *device_obj != NULL
+ *      -EPERM:      *device_obj = NULL
+ */
+extern int drv_get_dev_object(u32 index,
+				     struct drv_object *hdrv_obj,
+				     struct dev_object **device_obj);
+
+/*
+ *  ======== drv_get_next_dev_object ========
+ *  Purpose:
+ *      Returns the Ptr to the Next Device Object from the the List
+ *  Parameters:
+ *      hdev_obj:     Handle to the Device Object
+ *  Requires:
+ *      DRV Initialized
+ *      hdev_obj != 0
+ *  Returns:
+ *      dw_dev_object:    Ptr to the Next Dev Object as a u32
+ *      0:              If it fail to get the next Dev Object.
+ *  Ensures:
+ */
+extern u32 drv_get_next_dev_object(u32 hdev_obj);
+
+/*
+ *  ======== drv_get_next_dev_extension ========
+ *  Purpose:
+ *      Returns the Ptr to the Next Device Extension from the the List
+ *  Parameters:
+ *      dev_extension:      Handle to the Device Extension
+ *  Requires:
+ *      DRV Initialized
+ *      dev_extension != 0.
+ *  Returns:
+ *      dw_dev_extension:     Ptr to the Next Dev Extension
+ *      0:                  If it fail to Get the next Dev Extension
+ *  Ensures:
+ */
+extern u32 drv_get_next_dev_extension(u32 dev_extension);
+
+/*
+ *  ======== drv_init ========
+ *  Purpose:
+ *      Initialize the DRV module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if success; FALSE otherwise.
+ *  Requires:
+ *  Ensures:
+ */
+extern int drv_init(void);
+
+/*
+ *  ======== drv_insert_dev_object ========
+ *  Purpose:
+ *      Insert a DeviceObject into the list of Driver object.
+ *  Parameters:
+ *      driver_obj:     Handle to DrvObject
+ *      hdev_obj:     Handle to DeviceObject to insert.
+ *  Returns:
+ *      0:        If successful.
+ *      -EPERM:      General Failure:
+ *  Requires:
+ *      hdrv_obj != NULL and Valid DRV Handle.
+ *      hdev_obj != NULL.
+ *  Ensures:
+ *      0:        Device Object is inserted and the List is not empty.
+ */
+extern int drv_insert_dev_object(struct drv_object *driver_obj,
+					struct dev_object *hdev_obj);
+
+/*
+ *  ======== drv_remove_dev_object ========
+ *  Purpose:
+ *      Search for and remove a Device object from the given list of Device Obj
+ *      objects.
+ *  Parameters:
+ *      driver_obj:     Handle to DrvObject
+ *      hdev_obj:     Handle to DevObject to Remove
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Unable to find dev_obj.
+ *  Requires:
+ *      hdrv_obj != NULL and a Valid DRV Handle.
+ *      hdev_obj != NULL.
+ *      List exists and is not empty.
+ *  Ensures:
+ *      List either does not exist (NULL), or is not empty if it does exist.
+ */
+extern int drv_remove_dev_object(struct drv_object *driver_obj,
+					struct dev_object *hdev_obj);
+
+/*
+ *  ======== drv_request_resources ========
+ *  Purpose:
+ *      Assigns the Resources or Releases them.
+ *  Parameters:
+ *      dw_context:          Path to the driver Registry Key.
+ *      dev_node_strg:     Ptr to dev_node String stored in the Device Ext.
+ *  Returns:
+ *      TRUE if success; FALSE otherwise.
+ *  Requires:
+ *  Ensures:
+ *      The Resources are assigned based on Bus type.
+ *      The hardware is initialized. Resource information is
+ *      gathered from the Registry(ISA, PCMCIA)or scanned(PCI)
+ *      Resource structure is stored in the registry which will be
+ *      later used by the CFG module.
+ */
+extern int drv_request_resources(u32 dw_context,
+					u32 *dev_node_strg);
+
+/*
+ *  ======== drv_release_resources ========
+ *  Purpose:
+ *      Assigns the Resources or Releases them.
+ *  Parameters:
+ *      dw_context:      Path to the driver Registry Key.
+ *      hdrv_obj:     Handle to the Driver Object.
+ *  Returns:
+ *      TRUE if success; FALSE otherwise.
+ *  Requires:
+ *  Ensures:
+ *      The Resources are released based on Bus type.
+ *      Resource structure is deleted from the registry
+ */
+extern int drv_release_resources(u32 dw_context,
+					struct drv_object *hdrv_obj);
+
+/**
+ * drv_request_bridge_res_dsp() - Reserves shared memory for bridge.
+ * @phost_resources:  pointer to host resources.
+ */
+int drv_request_bridge_res_dsp(void **phost_resources);
+
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+void bridge_recover_schedule(void);
+#endif
+
+/*
+ *  ======== mem_ext_phys_pool_init ========
+ *  Purpose:
+ *      Uses the physical memory chunk passed for internal consitent memory
+ *      allocations.
+ *      physical address based on the page frame address.
+ *  Parameters:
+ *      pool_phys_base  starting address of the physical memory pool.
+ *      pool_size      size of the physical memory pool.
+ *  Returns:
+ *      none.
+ *  Requires:
+ *      - MEM initialized.
+ *      - valid physical address for the base and size > 0
+ */
+extern void mem_ext_phys_pool_init(u32 pool_phys_base, u32 pool_size);
+
+/*
+ *  ======== mem_ext_phys_pool_release ========
+ */
+extern void mem_ext_phys_pool_release(void);
+
+/*  ======== mem_alloc_phys_mem ========
+ *  Purpose:
+ *      Allocate physically contiguous, uncached memory
+ *  Parameters:
+ *      byte_size:     Number of bytes to allocate.
+ *      align_mask:    Alignment Mask.
+ *      physical_address: Physical address of allocated memory.
+ *  Returns:
+ *      Pointer to a block of memory;
+ *      NULL if memory couldn't be allocated, or if byte_size == 0.
+ *  Requires:
+ *      MEM initialized.
+ *  Ensures:
+ *      The returned pointer, if not NULL, points to a valid memory block of
+ *      the size requested.  Returned physical address refers to physical
+ *      location of memory.
+ */
+extern void *mem_alloc_phys_mem(u32 byte_size,
+				u32 align_mask, u32 *physical_address);
+
+/*
+ *  ======== mem_free_phys_mem ========
+ *  Purpose:
+ *      Free the given block of physically contiguous memory.
+ *  Parameters:
+ *      virtual_address:  Pointer to virtual memory region allocated
+ *      by mem_alloc_phys_mem().
+ *      physical_address:  Pointer to physical memory region  allocated
+ *      by mem_alloc_phys_mem().
+ *      byte_size:  Size of the memory region allocated by mem_alloc_phys_mem().
+ *  Returns:
+ *  Requires:
+ *      MEM initialized.
+ *      virtual_address is a valid memory address returned by
+ *          mem_alloc_phys_mem()
+ *  Ensures:
+ *      virtual_address is no longer a valid pointer to memory.
+ */
+extern void mem_free_phys_mem(void *virtual_address,
+			      u32 physical_address, u32 byte_size);
+
+/*
+ *  ======== MEM_LINEAR_ADDRESS ========
+ *  Purpose:
+ *      Get the linear address corresponding to the given physical address.
+ *  Parameters:
+ *      phys_addr:  Physical address to be mapped.
+ *      byte_size:     Number of bytes in physical range to map.
+ *  Returns:
+ *      The corresponding linear address, or NULL if unsuccessful.
+ *  Requires:
+ *      MEM initialized.
+ *  Ensures:
+ *  Notes:
+ *      If valid linear address is returned, be sure to call
+ *      MEM_UNMAP_LINEAR_ADDRESS().
+ */
+#define MEM_LINEAR_ADDRESS(phy_addr, byte_size) phy_addr
+
+/*
+ *  ======== MEM_UNMAP_LINEAR_ADDRESS ========
+ *  Purpose:
+ *      Unmap the linear address mapped in MEM_LINEAR_ADDRESS.
+ *  Parameters:
+ *      base_addr: Ptr to mapped memory (as returned by MEM_LINEAR_ADDRESS()).
+ *  Returns:
+ *  Requires:
+ *      - MEM initialized.
+ *      - base_addr is a valid linear address mapped in MEM_LINEAR_ADDRESS.
+ *  Ensures:
+ *      - base_addr no longer points to a valid linear address.
+ */
+#define MEM_UNMAP_LINEAR_ADDRESS(base_addr) {}
+
+#endif /* DRV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drvdefs.h b/drivers/staging/tidspbridge/include/dspbridge/drvdefs.h
new file mode 100644
index 00000000000..2920917bbc5
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/drvdefs.h
@@ -0,0 +1,25 @@
+/*
+ * drvdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definition of common struct between dspdefs.h and drv.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DRVDEFS_
+#define DRVDEFS_
+
+/* Bridge Driver Object */
+struct drv_object;
+
+#endif /* DRVDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspapi-ioctl.h b/drivers/staging/tidspbridge/include/dspbridge/dspapi-ioctl.h
new file mode 100644
index 00000000000..8da5bd8ede8
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspapi-ioctl.h
@@ -0,0 +1,475 @@
+/*
+ * dspapi-ioctl.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Contains structures and commands that are used for interaction
+ * between the DDSP API and Bridge driver.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPAPIIOCTL_
+#define DSPAPIIOCTL_
+
+#include <dspbridge/cmm.h>
+#include <dspbridge/strmdefs.h>
+#include <dspbridge/dbdcd.h>
+
+union trapped_args {
+
+	/* MGR Module */
+	struct {
+		u32 node_id;
+		struct dsp_ndbprops __user *pndb_props;
+		u32 undb_props_size;
+		u32 __user *pu_num_nodes;
+	} args_mgr_enumnode_info;
+
+	struct {
+		u32 processor_id;
+		struct dsp_processorinfo __user *processor_info;
+		u32 processor_info_size;
+		u32 __user *pu_num_procs;
+	} args_mgr_enumproc_info;
+
+	struct {
+		struct dsp_uuid *uuid_obj;
+		enum dsp_dcdobjtype obj_type;
+		char *psz_path_name;
+	} args_mgr_registerobject;
+
+	struct {
+		struct dsp_uuid *uuid_obj;
+		enum dsp_dcdobjtype obj_type;
+	} args_mgr_unregisterobject;
+
+	struct {
+		struct dsp_notification __user *__user *anotifications;
+		u32 count;
+		u32 __user *pu_index;
+		u32 utimeout;
+	} args_mgr_wait;
+
+	/* PROC Module */
+	struct {
+		u32 processor_id;
+		struct dsp_processorattrin __user *attr_in;
+		void *__user *ph_processor;
+	} args_proc_attach;
+
+	struct {
+		void *hprocessor;
+		u32 dw_cmd;
+		struct dsp_cbdata __user *pargs;
+	} args_proc_ctrl;
+
+	struct {
+		void *hprocessor;
+	} args_proc_detach;
+
+	struct {
+		void *hprocessor;
+		void *__user *node_tab;
+		u32 node_tab_size;
+		u32 __user *pu_num_nodes;
+		u32 __user *pu_allocated;
+	} args_proc_enumnode_info;
+
+	struct {
+		void *hprocessor;
+		u32 resource_type;
+		struct dsp_resourceinfo *resource_info;
+		u32 resource_info_size;
+	} args_proc_enumresources;
+
+	struct {
+		void *hprocessor;
+		struct dsp_processorstate __user *proc_state_obj;
+		u32 state_info_size;
+	} args_proc_getstate;
+
+	struct {
+		void *hprocessor;
+		u8 __user *pbuf;
+		u8 __user *psize;
+		u32 max_size;
+	} args_proc_gettrace;
+
+	struct {
+		void *hprocessor;
+		s32 argc_index;
+		char __user *__user *user_args;
+		char *__user *user_envp;
+	} args_proc_load;
+
+	struct {
+		void *hprocessor;
+		u32 event_mask;
+		u32 notify_type;
+		struct dsp_notification __user *hnotification;
+	} args_proc_register_notify;
+
+	struct {
+		void *hprocessor;
+	} args_proc_start;
+
+	struct {
+		void *hprocessor;
+		u32 ul_size;
+		void *__user *pp_rsv_addr;
+	} args_proc_rsvmem;
+
+	struct {
+		void *hprocessor;
+		u32 ul_size;
+		void *prsv_addr;
+	} args_proc_unrsvmem;
+
+	struct {
+		void *hprocessor;
+		void *pmpu_addr;
+		u32 ul_size;
+		void *req_addr;
+		void *__user *pp_map_addr;
+		u32 ul_map_attr;
+	} args_proc_mapmem;
+
+	struct {
+		void *hprocessor;
+		u32 ul_size;
+		void *map_addr;
+	} args_proc_unmapmem;
+
+	struct {
+		void *hprocessor;
+		void *pmpu_addr;
+		u32 ul_size;
+		u32 dir;
+	} args_proc_dma;
+
+	struct {
+		void *hprocessor;
+		void *pmpu_addr;
+		u32 ul_size;
+		u32 ul_flags;
+	} args_proc_flushmemory;
+
+	struct {
+		void *hprocessor;
+	} args_proc_stop;
+
+	struct {
+		void *hprocessor;
+		void *pmpu_addr;
+		u32 ul_size;
+	} args_proc_invalidatememory;
+
+	/* NODE Module */
+	struct {
+		void *hprocessor;
+		struct dsp_uuid __user *node_id_ptr;
+		struct dsp_cbdata __user *pargs;
+		struct dsp_nodeattrin __user *attr_in;
+		void *__user *ph_node;
+	} args_node_allocate;
+
+	struct {
+		void *hnode;
+		u32 usize;
+		struct dsp_bufferattr __user *pattr;
+		u8 *__user *pbuffer;
+	} args_node_allocmsgbuf;
+
+	struct {
+		void *hnode;
+		s32 prio;
+	} args_node_changepriority;
+
+	struct {
+		void *hnode;
+		u32 stream_id;
+		void *other_node;
+		u32 other_stream;
+		struct dsp_strmattr __user *pattrs;
+		struct dsp_cbdata __user *conn_param;
+	} args_node_connect;
+
+	struct {
+		void *hnode;
+	} args_node_create;
+
+	struct {
+		void *hnode;
+	} args_node_delete;
+
+	struct {
+		void *hnode;
+		struct dsp_bufferattr __user *pattr;
+		u8 *pbuffer;
+	} args_node_freemsgbuf;
+
+	struct {
+		void *hnode;
+		struct dsp_nodeattr __user *pattr;
+		u32 attr_size;
+	} args_node_getattr;
+
+	struct {
+		void *hnode;
+		struct dsp_msg __user *message;
+		u32 utimeout;
+	} args_node_getmessage;
+
+	struct {
+		void *hnode;
+	} args_node_pause;
+
+	struct {
+		void *hnode;
+		struct dsp_msg __user *message;
+		u32 utimeout;
+	} args_node_putmessage;
+
+	struct {
+		void *hnode;
+		u32 event_mask;
+		u32 notify_type;
+		struct dsp_notification __user *hnotification;
+	} args_node_registernotify;
+
+	struct {
+		void *hnode;
+	} args_node_run;
+
+	struct {
+		void *hnode;
+		int __user *pstatus;
+	} args_node_terminate;
+
+	struct {
+		void *hprocessor;
+		struct dsp_uuid __user *node_id_ptr;
+		struct dsp_ndbprops __user *node_props;
+	} args_node_getuuidprops;
+
+	/* STRM module */
+
+	struct {
+		void *hstream;
+		u32 usize;
+		u8 *__user *ap_buffer;
+		u32 num_bufs;
+	} args_strm_allocatebuffer;
+
+	struct {
+		void *hstream;
+	} args_strm_close;
+
+	struct {
+		void *hstream;
+		u8 *__user *ap_buffer;
+		u32 num_bufs;
+	} args_strm_freebuffer;
+
+	struct {
+		void *hstream;
+		void **ph_event;
+	} args_strm_geteventhandle;
+
+	struct {
+		void *hstream;
+		struct stream_info __user *stream_info;
+		u32 stream_info_size;
+	} args_strm_getinfo;
+
+	struct {
+		void *hstream;
+		bool flush_flag;
+	} args_strm_idle;
+
+	struct {
+		void *hstream;
+		u8 *pbuffer;
+		u32 dw_bytes;
+		u32 dw_buf_size;
+		u32 dw_arg;
+	} args_strm_issue;
+
+	struct {
+		void *hnode;
+		u32 direction;
+		u32 index;
+		struct strm_attr __user *attr_in;
+		void *__user *ph_stream;
+	} args_strm_open;
+
+	struct {
+		void *hstream;
+		u8 *__user *buf_ptr;
+		u32 __user *bytes;
+		u32 __user *buf_size_ptr;
+		u32 __user *pdw_arg;
+	} args_strm_reclaim;
+
+	struct {
+		void *hstream;
+		u32 event_mask;
+		u32 notify_type;
+		struct dsp_notification __user *hnotification;
+	} args_strm_registernotify;
+
+	struct {
+		void *__user *stream_tab;
+		u32 strm_num;
+		u32 __user *pmask;
+		u32 utimeout;
+	} args_strm_select;
+
+	/* CMM Module */
+	struct {
+		struct cmm_object *hcmm_mgr;
+		u32 usize;
+		struct cmm_attrs *pattrs;
+		void **pp_buf_va;
+	} args_cmm_allocbuf;
+
+	struct {
+		struct cmm_object *hcmm_mgr;
+		void *buf_pa;
+		u32 ul_seg_id;
+	} args_cmm_freebuf;
+
+	struct {
+		void *hprocessor;
+		struct cmm_object *__user *ph_cmm_mgr;
+	} args_cmm_gethandle;
+
+	struct {
+		struct cmm_object *hcmm_mgr;
+		struct cmm_info __user *cmm_info_obj;
+	} args_cmm_getinfo;
+
+	/* UTIL module */
+	struct {
+		s32 util_argc;
+		char **pp_argv;
+	} args_util_testdll;
+};
+
+/*
+ * Dspbridge Ioctl numbering scheme
+ *
+ *    7                           0
+ *  ---------------------------------
+ *  |  Module   |   Ioctl Number    |
+ *  ---------------------------------
+ *  | x | x | x | 0 | 0 | 0 | 0 | 0 |
+ *  ---------------------------------
+ */
+
+/* Ioctl driver identifier */
+#define DB		0xDB
+
+/*
+ * Following are used to distinguish between module ioctls, this is needed
+ * in case new ioctls are introduced.
+ */
+#define DB_MODULE_MASK		0xE0
+#define DB_IOC_MASK		0x1F
+
+/* Ioctl module masks */
+#define DB_MGR		0x0
+#define DB_PROC		0x20
+#define DB_NODE		0x40
+#define DB_STRM		0x60
+#define DB_CMM		0x80
+
+#define DB_MODULE_SHIFT		5
+
+/* Used to calculate the ioctl per dspbridge module */
+#define DB_IOC(module, num) \
+			(((module) & DB_MODULE_MASK) | ((num) & DB_IOC_MASK))
+/* Used to get dspbridge ioctl module */
+#define DB_GET_MODULE(cmd)	((cmd) & DB_MODULE_MASK)
+/* Used to get dspbridge ioctl number */
+#define DB_GET_IOC(cmd)		((cmd) & DB_IOC_MASK)
+
+/* TODO: Remove deprecated and not implemented */
+
+/* MGR Module */
+#define MGR_ENUMNODE_INFO	_IOWR(DB, DB_IOC(DB_MGR, 0), unsigned long)
+#define MGR_ENUMPROC_INFO	_IOWR(DB, DB_IOC(DB_MGR, 1), unsigned long)
+#define MGR_REGISTEROBJECT	_IOWR(DB, DB_IOC(DB_MGR, 2), unsigned long)
+#define MGR_UNREGISTEROBJECT	_IOWR(DB, DB_IOC(DB_MGR, 3), unsigned long)
+#define MGR_WAIT		_IOWR(DB, DB_IOC(DB_MGR, 4), unsigned long)
+/* MGR_GET_PROC_RES Deprecated */
+#define MGR_GET_PROC_RES	_IOR(DB, DB_IOC(DB_MGR, 5), unsigned long)
+
+/* PROC Module */
+#define PROC_ATTACH		_IOWR(DB, DB_IOC(DB_PROC, 0), unsigned long)
+#define PROC_CTRL		_IOR(DB, DB_IOC(DB_PROC, 1), unsigned long)
+/* PROC_DETACH Deprecated */
+#define PROC_DETACH		_IOR(DB, DB_IOC(DB_PROC, 2), unsigned long)
+#define PROC_ENUMNODE		_IOWR(DB, DB_IOC(DB_PROC, 3), unsigned long)
+#define PROC_ENUMRESOURCES	_IOWR(DB, DB_IOC(DB_PROC, 4), unsigned long)
+#define PROC_GET_STATE		_IOWR(DB, DB_IOC(DB_PROC, 5), unsigned long)
+#define PROC_GET_TRACE		_IOWR(DB, DB_IOC(DB_PROC, 6), unsigned long)
+#define PROC_LOAD		_IOW(DB, DB_IOC(DB_PROC, 7), unsigned long)
+#define PROC_REGISTERNOTIFY	_IOWR(DB, DB_IOC(DB_PROC, 8), unsigned long)
+#define PROC_START		_IOW(DB, DB_IOC(DB_PROC, 9), unsigned long)
+#define PROC_RSVMEM		_IOWR(DB, DB_IOC(DB_PROC, 10), unsigned long)
+#define PROC_UNRSVMEM		_IOW(DB, DB_IOC(DB_PROC, 11), unsigned long)
+#define PROC_MAPMEM		_IOWR(DB, DB_IOC(DB_PROC, 12), unsigned long)
+#define PROC_UNMAPMEM		_IOR(DB, DB_IOC(DB_PROC, 13), unsigned long)
+#define PROC_FLUSHMEMORY	_IOW(DB, DB_IOC(DB_PROC, 14), unsigned long)
+#define PROC_STOP		_IOWR(DB, DB_IOC(DB_PROC, 15), unsigned long)
+#define PROC_INVALIDATEMEMORY	_IOW(DB, DB_IOC(DB_PROC, 16), unsigned long)
+#define PROC_BEGINDMA		_IOW(DB, DB_IOC(DB_PROC, 17), unsigned long)
+#define PROC_ENDDMA		_IOW(DB, DB_IOC(DB_PROC, 18), unsigned long)
+
+/* NODE Module */
+#define NODE_ALLOCATE		_IOWR(DB, DB_IOC(DB_NODE, 0), unsigned long)
+#define NODE_ALLOCMSGBUF	_IOWR(DB, DB_IOC(DB_NODE, 1), unsigned long)
+#define NODE_CHANGEPRIORITY	_IOW(DB, DB_IOC(DB_NODE, 2), unsigned long)
+#define NODE_CONNECT		_IOW(DB, DB_IOC(DB_NODE, 3), unsigned long)
+#define NODE_CREATE		_IOW(DB, DB_IOC(DB_NODE, 4), unsigned long)
+#define NODE_DELETE		_IOW(DB, DB_IOC(DB_NODE, 5), unsigned long)
+#define NODE_FREEMSGBUF		_IOW(DB, DB_IOC(DB_NODE, 6), unsigned long)
+#define NODE_GETATTR		_IOWR(DB, DB_IOC(DB_NODE, 7), unsigned long)
+#define NODE_GETMESSAGE		_IOWR(DB, DB_IOC(DB_NODE, 8), unsigned long)
+#define NODE_PAUSE		_IOW(DB, DB_IOC(DB_NODE, 9), unsigned long)
+#define NODE_PUTMESSAGE		_IOW(DB, DB_IOC(DB_NODE, 10), unsigned long)
+#define NODE_REGISTERNOTIFY	_IOWR(DB, DB_IOC(DB_NODE, 11), unsigned long)
+#define NODE_RUN		_IOW(DB, DB_IOC(DB_NODE, 12), unsigned long)
+#define NODE_TERMINATE		_IOWR(DB, DB_IOC(DB_NODE, 13), unsigned long)
+#define NODE_GETUUIDPROPS	_IOWR(DB, DB_IOC(DB_NODE, 14), unsigned long)
+
+/* STRM Module */
+#define STRM_ALLOCATEBUFFER	_IOWR(DB, DB_IOC(DB_STRM, 0), unsigned long)
+#define STRM_CLOSE		_IOW(DB, DB_IOC(DB_STRM, 1), unsigned long)
+#define STRM_FREEBUFFER		_IOWR(DB, DB_IOC(DB_STRM, 2), unsigned long)
+#define STRM_GETEVENTHANDLE	_IO(DB, DB_IOC(DB_STRM, 3))	/* Not Impl'd */
+#define STRM_GETINFO		_IOWR(DB, DB_IOC(DB_STRM, 4), unsigned long)
+#define STRM_IDLE		_IOW(DB, DB_IOC(DB_STRM, 5), unsigned long)
+#define STRM_ISSUE		_IOW(DB, DB_IOC(DB_STRM, 6), unsigned long)
+#define STRM_OPEN		_IOWR(DB, DB_IOC(DB_STRM, 7), unsigned long)
+#define STRM_RECLAIM		_IOWR(DB, DB_IOC(DB_STRM, 8), unsigned long)
+#define STRM_REGISTERNOTIFY	_IOWR(DB, DB_IOC(DB_STRM, 9), unsigned long)
+#define STRM_SELECT		_IOWR(DB, DB_IOC(DB_STRM, 10), unsigned long)
+
+/* CMM Module */
+#define CMM_ALLOCBUF		_IO(DB, DB_IOC(DB_CMM, 0))	/* Not Impl'd */
+#define CMM_FREEBUF		_IO(DB, DB_IOC(DB_CMM, 1))	/* Not Impl'd */
+#define CMM_GETHANDLE		_IOR(DB, DB_IOC(DB_CMM, 2), unsigned long)
+#define CMM_GETINFO		_IOR(DB, DB_IOC(DB_CMM, 3), unsigned long)
+
+#endif /* DSPAPIIOCTL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspapi.h b/drivers/staging/tidspbridge/include/dspbridge/dspapi.h
new file mode 100644
index 00000000000..c99c68738b0
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspapi.h
@@ -0,0 +1,167 @@
+/*
+ * dspapi.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Includes the wrapper functions called directly by the
+ * DeviceIOControl interface.
+ *
+ * Notes:
+ *   Bridge services exported to Bridge driver are initialized by the DSPAPI on
+ *   behalf of the Bridge driver. Bridge driver must not call module Init/Exit
+ *   functions.
+ *
+ *   To ensure Bridge driver binary compatibility across different platforms,
+ *   for the same processor, a Bridge driver must restrict its usage of system
+ *   services to those exported by the DSPAPI library.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPAPI_
+#define DSPAPI_
+
+#include <dspbridge/dspapi-ioctl.h>
+
+/* This BRD API Library Version: */
+#define BRD_API_MAJOR_VERSION   (u32)8	/* .8x - Alpha, .9x - Beta, 1.x FCS */
+#define BRD_API_MINOR_VERSION   (u32)0
+
+/*
+ *  ======== api_call_dev_ioctl ========
+ *  Purpose:
+ *      Call the (wrapper) function for the corresponding API IOCTL.
+ *  Parameters:
+ *      cmd:        IOCTL id, base 0.
+ *      args:       Argument structure.
+ *      result:
+ *  Returns:
+ *      0 if command called; -EINVAL if command not in IOCTL
+ *      table.
+ *  Requires:
+ *  Ensures:
+ */
+extern int api_call_dev_ioctl(unsigned int cmd,
+				      union trapped_args *args,
+				      u32 *result, void *pr_ctxt);
+
+/*
+ *  ======== api_init ========
+ *  Purpose:
+ *      Initialize modules used by Bridge API.
+ *      This procedure is called when the driver is loaded.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if success; FALSE otherwise.
+ *  Requires:
+ *  Ensures:
+ */
+extern bool api_init(void);
+
+/*
+ *  ======== api_init_complete2 ========
+ *  Purpose:
+ *      Perform any required bridge initialization which cannot
+ *      be performed in api_init() or dev_start_device() due
+ *      to the fact that some services are not yet
+ *      completely initialized.
+ *  Parameters:
+ *  Returns:
+ *      0:        Allow this device to load
+ *      -EPERM:      Failure.
+ *  Requires:
+ *      Bridge API initialized.
+ *  Ensures:
+ */
+extern int api_init_complete2(void);
+
+/*
+ *  ======== api_exit ========
+ *  Purpose:
+ *      Exit all modules initialized in api_init(void).
+ *      This procedure is called when the driver is unloaded.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      api_init(void) was previously called.
+ *  Ensures:
+ *      Resources acquired in api_init(void) are freed.
+ */
+extern void api_exit(void);
+
+/* MGR wrapper functions */
+extern u32 mgrwrap_enum_node_info(union trapped_args *args, void *pr_ctxt);
+extern u32 mgrwrap_enum_proc_info(union trapped_args *args, void *pr_ctxt);
+extern u32 mgrwrap_register_object(union trapped_args *args, void *pr_ctxt);
+extern u32 mgrwrap_unregister_object(union trapped_args *args, void *pr_ctxt);
+extern u32 mgrwrap_wait_for_bridge_events(union trapped_args *args,
+					  void *pr_ctxt);
+
+extern u32 mgrwrap_get_process_resources_info(union trapped_args *args,
+					      void *pr_ctxt);
+
+/* CPRC (Processor) wrapper Functions */
+extern u32 procwrap_attach(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_ctrl(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_detach(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_enum_node_info(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_enum_resources(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_get_state(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_get_trace(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_load(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_register_notify(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_start(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_reserve_memory(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_un_reserve_memory(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_map(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_un_map(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_flush_memory(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_stop(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_invalidate_memory(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_begin_dma(union trapped_args *args, void *pr_ctxt);
+extern u32 procwrap_end_dma(union trapped_args *args, void *pr_ctxt);
+
+/* NODE wrapper functions */
+extern u32 nodewrap_allocate(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_alloc_msg_buf(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_change_priority(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_connect(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_create(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_delete(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_free_msg_buf(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_get_attr(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_get_message(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_pause(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_put_message(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_register_notify(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_run(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_terminate(union trapped_args *args, void *pr_ctxt);
+extern u32 nodewrap_get_uuid_props(union trapped_args *args, void *pr_ctxt);
+
+/* STRM wrapper functions */
+extern u32 strmwrap_allocate_buffer(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_close(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_free_buffer(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_get_event_handle(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_get_info(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_idle(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_issue(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_open(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_reclaim(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_register_notify(union trapped_args *args, void *pr_ctxt);
+extern u32 strmwrap_select(union trapped_args *args, void *pr_ctxt);
+
+extern u32 cmmwrap_calloc_buf(union trapped_args *args, void *pr_ctxt);
+extern u32 cmmwrap_free_buf(union trapped_args *args, void *pr_ctxt);
+extern u32 cmmwrap_get_handle(union trapped_args *args, void *pr_ctxt);
+extern u32 cmmwrap_get_info(union trapped_args *args, void *pr_ctxt);
+
+#endif /* DSPAPI_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspchnl.h b/drivers/staging/tidspbridge/include/dspbridge/dspchnl.h
new file mode 100644
index 00000000000..7146a5057e2
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspchnl.h
@@ -0,0 +1,72 @@
+/*
+ * dspchnl.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Declares the upper edge channel class library functions required by
+ * all Bridge driver / DSP API driver interface tables. These functions are
+ * implemented by every class of Bridge channel library.
+ *
+ * Notes:
+ *   The function comment headers reside in dspdefs.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPCHNL_
+#define DSPCHNL_
+
+extern int bridge_chnl_create(struct chnl_mgr **channel_mgr,
+				     struct dev_object *hdev_obj,
+				     const struct chnl_mgrattrs
+				     *mgr_attrts);
+
+extern int bridge_chnl_destroy(struct chnl_mgr *hchnl_mgr);
+
+extern int bridge_chnl_open(struct chnl_object **chnl,
+				   struct chnl_mgr *hchnl_mgr,
+				   s8 chnl_mode,
+				   u32 ch_id,
+				   const struct chnl_attr
+				   *pattrs);
+
+extern int bridge_chnl_close(struct chnl_object *chnl_obj);
+
+extern int bridge_chnl_add_io_req(struct chnl_object *chnl_obj,
+				      void *host_buf,
+				      u32 byte_size, u32 buf_size,
+				      u32 dw_dsp_addr, u32 dw_arg);
+
+extern int bridge_chnl_get_ioc(struct chnl_object *chnl_obj,
+				   u32 timeout, struct chnl_ioc *chan_ioc);
+
+extern int bridge_chnl_cancel_io(struct chnl_object *chnl_obj);
+
+extern int bridge_chnl_flush_io(struct chnl_object *chnl_obj,
+				    u32 timeout);
+
+extern int bridge_chnl_get_info(struct chnl_object *chnl_obj,
+				    struct chnl_info *channel_info);
+
+extern int bridge_chnl_get_mgr_info(struct chnl_mgr *hchnl_mgr,
+					u32 ch_id, struct chnl_mgrinfo
+					*mgr_info);
+
+extern int bridge_chnl_idle(struct chnl_object *chnl_obj,
+				   u32 timeout, bool flush_data);
+
+extern int bridge_chnl_register_notify(struct chnl_object *chnl_obj,
+					   u32 event_mask,
+					   u32 notify_type,
+					   struct dsp_notification
+					   *hnotification);
+
+#endif /* DSPCHNL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
new file mode 100644
index 00000000000..0ae7d1646a1
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -0,0 +1,1054 @@
+/*
+ * dspdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Bridge driver entry point and interface function declarations.
+ *
+ * Notes:
+ *   The DSP API obtains it's function interface to
+ *   the Bridge driver via a call to bridge_drv_entry().
+ *
+ *   Bridge services exported to Bridge drivers are initialized by the
+ *   DSP API on behalf of the Bridge driver.
+ *
+ *   Bridge function DBC Requires and Ensures are also made by the DSP API on
+ *   behalf of the Bridge driver, to simplify the Bridge driver code.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPDEFS_
+#define DSPDEFS_
+
+#include <dspbridge/brddefs.h>
+#include <dspbridge/cfgdefs.h>
+#include <dspbridge/chnlpriv.h>
+#include <dspbridge/dehdefs.h>
+#include <dspbridge/devdefs.h>
+#include <dspbridge/iodefs.h>
+#include <dspbridge/msgdefs.h>
+
+/*
+ *  Any IOCTLS at or above this value are reserved for standard Bridge driver
+ *  interfaces.
+ */
+#define BRD_RESERVEDIOCTLBASE   0x8000
+
+/* Handle to Bridge driver's private device context. */
+struct bridge_dev_context;
+
+/*--------------------------------------------------------------------------- */
+/* BRIDGE DRIVER FUNCTION TYPES */
+/*--------------------------------------------------------------------------- */
+
+/*
+ *  ======== bridge_brd_monitor ========
+ *  Purpose:
+ *      Bring the board to the BRD_IDLE (monitor) state.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device context.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL
+ *  Ensures:
+ *      0:        Board is in BRD_IDLE state;
+ *      else:           Board state is indeterminate.
+ */
+typedef int(*fxn_brd_monitor) (struct bridge_dev_context *dev_ctxt);
+
+/*
+ *  ======== fxn_brd_setstate ========
+ *  Purpose:
+ *      Sets the Bridge driver state
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      brd_state:      Board state
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *      brd_state  <= BRD_LASTSTATE.
+ *  Ensures:
+ *      brd_state  <= BRD_LASTSTATE.
+ *  Update the Board state to the specified state.
+ */
+typedef int(*fxn_brd_setstate) (struct bridge_dev_context
+				       * dev_ctxt, u32 brd_state);
+
+/*
+ *  ======== bridge_brd_start ========
+ *  Purpose:
+ *      Bring board to the BRD_RUNNING (start) state.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device context.
+ *      dsp_addr:       DSP address at which to start execution.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL
+ *      Board is in monitor (BRD_IDLE) state.
+ *  Ensures:
+ *      0:        Board is in BRD_RUNNING state.
+ *                      Interrupts to the PC are enabled.
+ *      else:           Board state is indeterminate.
+ */
+typedef int(*fxn_brd_start) (struct bridge_dev_context
+				    * dev_ctxt, u32 dsp_addr);
+
+/*
+ *  ======== bridge_brd_mem_copy ========
+ *  Purpose:
+ *  Copy memory from one DSP address to another
+ *  Parameters:
+ *      dev_context:    Pointer to context handle
+ *  dsp_dest_addr:  DSP address to copy to
+ *  dsp_src_addr:   DSP address to copy from
+ *  ul_num_bytes: Number of bytes to copy
+ *  mem_type:   What section of memory to copy to
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_context != NULL
+ *  Ensures:
+ *      0:        Board is in BRD_RUNNING state.
+ *                      Interrupts to the PC are enabled.
+ *      else:           Board state is indeterminate.
+ */
+typedef int(*fxn_brd_memcopy) (struct bridge_dev_context
+				      * dev_ctxt,
+				      u32 dsp_dest_addr,
+				      u32 dsp_src_addr,
+				      u32 ul_num_bytes, u32 mem_type);
+/*
+ *  ======== bridge_brd_mem_write ========
+ *  Purpose:
+ *      Write a block of host memory into a DSP address, into a given memory
+ *      space.  Unlike bridge_brd_write, this API does reset the DSP
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      dsp_addr:       Address on DSP board (Destination).
+ *      host_buf:       Pointer to host buffer (Source).
+ *      ul_num_bytes:     Number of bytes to transfer.
+ *      mem_type:       Memory space on DSP to which to transfer.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *      host_buf != NULL.
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memwrite) (struct bridge_dev_context
+				       * dev_ctxt,
+				       u8 *host_buf,
+				       u32 dsp_addr, u32 ul_num_bytes,
+				       u32 mem_type);
+
+/*
+ *  ======== bridge_brd_mem_map ========
+ *  Purpose:
+ *      Map a MPU memory region to a DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      ul_mpu_addr:      MPU memory region start address.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to map.
+ *      map_attrs:       Mapping attributes (e.g. endianness).
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memmap) (struct bridge_dev_context
+				     * dev_ctxt, u32 ul_mpu_addr,
+				     u32 virt_addr, u32 ul_num_bytes,
+				     u32 map_attr,
+				     struct page **mapped_pages);
+
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *  Purpose:
+ *      UnMap an MPU memory region from DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to unmap.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
+				       * dev_ctxt,
+				       u32 virt_addr, u32 ul_num_bytes);
+
+/*
+ *  ======== bridge_brd_stop ========
+ *  Purpose:
+ *      Bring board to the BRD_STOPPED state.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device context.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL
+ *  Ensures:
+ *      0:        Board is in BRD_STOPPED (stop) state;
+ *                      Interrupts to the PC are disabled.
+ *      else:           Board state is indeterminate.
+ */
+typedef int(*fxn_brd_stop) (struct bridge_dev_context *dev_ctxt);
+
+/*
+ *  ======== bridge_brd_status ========
+ *  Purpose:
+ *      Report the current state of the board.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device context.
+ *      board_state:    Ptr to BRD status variable.
+ *  Returns:
+ *      0:
+ *  Requires:
+ *      board_state != NULL;
+ *      dev_ctxt != NULL
+ *  Ensures:
+ *      *board_state is one of
+ *       {BRD_STOPPED, BRD_IDLE, BRD_RUNNING, BRD_UNKNOWN};
+ */
+typedef int(*fxn_brd_status) (struct bridge_dev_context *dev_ctxt,
+				     int *board_state);
+
+/*
+ *  ======== bridge_brd_read ========
+ *  Purpose:
+ *      Read a block of DSP memory, from a given memory space, into a host
+ *      buffer.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      host_buf:       Pointer to host buffer (Destination).
+ *      dsp_addr:       Address on DSP board (Source).
+ *      ul_num_bytes:     Number of bytes to transfer.
+ *      mem_type:       Memory space on DSP from which to transfer.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *      host_buf != NULL.
+ *  Ensures:
+ *  Will not write more than ul_num_bytes bytes into host_buf.
+ */
+typedef int(*fxn_brd_read) (struct bridge_dev_context *dev_ctxt,
+				   u8 *host_buf,
+				   u32 dsp_addr,
+				   u32 ul_num_bytes, u32 mem_type);
+
+/*
+ *  ======== bridge_brd_write ========
+ *  Purpose:
+ *      Write a block of host memory into a DSP address, into a given memory
+ *      space.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      dsp_addr:       Address on DSP board (Destination).
+ *      host_buf:       Pointer to host buffer (Source).
+ *      ul_num_bytes:     Number of bytes to transfer.
+ *      mem_type:       Memory space on DSP to which to transfer.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *      host_buf != NULL.
+ *  Ensures:
+ */
+typedef int(*fxn_brd_write) (struct bridge_dev_context *dev_ctxt,
+				    u8 *host_buf,
+				    u32 dsp_addr,
+				    u32 ul_num_bytes, u32 mem_type);
+
+/*
+ *  ======== bridge_chnl_create ========
+ *  Purpose:
+ *      Create a channel manager object, responsible for opening new channels
+ *      and closing old ones for a given 'Bridge board.
+ *  Parameters:
+ *      channel_mgr:    Location to store a channel manager object on output.
+ *      hdev_obj:     Handle to a device object.
+ *      mgr_attrts:      Channel manager attributes.
+ *      mgr_attrts->max_channels: Max channels
+ *      mgr_attrts->birq:      Channel's I/O IRQ number.
+ *      mgr_attrts->irq_shared:   TRUE if the IRQ is shareable.
+ *      mgr_attrts->word_size: DSP Word size in equivalent PC bytes..
+ *      mgr_attrts->shm_base:  Base physical address of shared memory, if any.
+ *      mgr_attrts->usm_length: Bytes of shared memory block.
+ *  Returns:
+ *      0:            Success;
+ *      -ENOMEM:        Insufficient memory for requested resources.
+ *      -EIO:         Unable to plug ISR for given IRQ.
+ *      -EFAULT:    Couldn't map physical address to a virtual one.
+ *  Requires:
+ *      channel_mgr != NULL.
+ *      mgr_attrts != NULL
+ *      mgr_attrts field are all valid:
+ *          0 < max_channels <= CHNL_MAXCHANNELS.
+ *          birq <= 15.
+ *          word_size > 0.
+ *      hdev_obj != NULL
+ *      No channel manager exists for this board.
+ *  Ensures:
+ */
+typedef int(*fxn_chnl_create) (struct chnl_mgr
+				      **channel_mgr,
+				      struct dev_object
+				      * hdev_obj,
+				      const struct
+				      chnl_mgrattrs * mgr_attrts);
+
+/*
+ *  ======== bridge_chnl_destroy ========
+ *  Purpose:
+ *      Close all open channels, and destroy the channel manager.
+ *  Parameters:
+ *      hchnl_mgr:       Channel manager object.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    hchnl_mgr was invalid.
+ *  Requires:
+ *  Ensures:
+ *      0: Cancels I/O on each open channel. Closes each open channel.
+ *          chnl_create may subsequently be called for the same device.
+ */
+typedef int(*fxn_chnl_destroy) (struct chnl_mgr *hchnl_mgr);
+/*
+ *  ======== bridge_deh_notify ========
+ *  Purpose:
+ *      When notified of DSP error, take appropriate action.
+ *  Parameters:
+ *      hdeh_mgr:        Handle to DEH manager object.
+ *      evnt_mask:    Indicate the type of exception
+ *      error_info:    Error information
+ *  Returns:
+ *
+ *  Requires:
+ *      hdeh_mgr != NULL;
+ *     evnt_mask with a valid exception
+ *  Ensures:
+ */
+typedef void (*fxn_deh_notify) (struct deh_mgr *hdeh_mgr,
+				u32 evnt_mask, u32 error_info);
+
+/*
+ *  ======== bridge_chnl_open ========
+ *  Purpose:
+ *      Open a new half-duplex channel to the DSP board.
+ *  Parameters:
+ *      chnl:           Location to store a channel object handle.
+ *      hchnl_mgr:	Handle to channel manager, as returned by
+ *      		CHNL_GetMgr().
+ *      chnl_mode:          One of {CHNL_MODETODSP, CHNL_MODEFROMDSP} specifies
+ *                      direction of data transfer.
+ *      ch_id:        If CHNL_PICKFREE is specified, the channel manager will
+ *                      select a free channel id (default);
+ *                      otherwise this field specifies the id of the channel.
+ *      pattrs:         Channel attributes.  Attribute fields are as follows:
+ *      pattrs->uio_reqs: Specifies the maximum number of I/O requests which can
+ *                      be pending at any given time. All request packets are
+ *                      preallocated when the channel is opened.
+ *      pattrs->event_obj: This field allows the user to supply an auto reset
+ *                      event object for channel I/O completion notifications.
+ *                      It is the responsibility of the user to destroy this
+ *                      object AFTER closing the channel.
+ *                      This channel event object can be retrieved using
+ *                      CHNL_GetEventHandle().
+ *      pattrs->hReserved: The kernel mode handle of this event object.
+ *
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:            hchnl_mgr is invalid.
+ *      -ENOMEM:            Insufficient memory for requested resources.
+ *      -EINVAL:        Invalid number of IOReqs.
+ *      -ENOSR:    No free channels available.
+ *      -ECHRNG:       Channel ID is out of range.
+ *      -EALREADY:        Channel is in use.
+ *      -EIO:         No free IO request packets available for
+ *                              queuing.
+ *  Requires:
+ *      chnl != NULL.
+ *      pattrs != NULL.
+ *      pattrs->event_obj is a valid event handle.
+ *      pattrs->hReserved is the kernel mode handle for pattrs->event_obj.
+ *  Ensures:
+ *      0:                *chnl is a valid channel.
+ *      else:                   *chnl is set to NULL if (chnl != NULL);
+ */
+typedef int(*fxn_chnl_open) (struct chnl_object
+				    **chnl,
+				    struct chnl_mgr *hchnl_mgr,
+				    s8 chnl_mode,
+				    u32 ch_id,
+				    const struct
+				    chnl_attr * pattrs);
+
+/*
+ *  ======== bridge_chnl_close ========
+ *  Purpose:
+ *      Ensures all pending I/O on this channel is cancelled, discards all
+ *      queued I/O completion notifications, then frees the resources allocated
+ *      for this channel, and makes the corresponding logical channel id
+ *      available for subsequent use.
+ *  Parameters:
+ *      chnl_obj:          Handle to a channel object.
+ *  Returns:
+ *      0:        Success;
+ *      -EFAULT:    Invalid chnl_obj.
+ *  Requires:
+ *      No thread must be blocked on this channel's I/O completion event.
+ *  Ensures:
+ *      0:        chnl_obj is no longer valid.
+ */
+typedef int(*fxn_chnl_close) (struct chnl_object *chnl_obj);
+
+/*
+ *  ======== bridge_chnl_add_io_req ========
+ *  Purpose:
+ *      Enqueue an I/O request for data transfer on a channel to the DSP.
+ *      The direction (mode) is specified in the channel object. Note the DSP
+ *      address is specified for channels opened in direct I/O mode.
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *      host_buf:       Host buffer address source.
+ *      byte_size:	Number of PC bytes to transfer. A zero value indicates
+ *                      that this buffer is the last in the output channel.
+ *                      A zero value is invalid for an input channel.
+ *!     buf_size:       Actual buffer size in host bytes.
+ *      dw_dsp_addr:      DSP address for transfer.  (Currently ignored).
+ *      dw_arg:          A user argument that travels with the buffer.
+ *  Returns:
+ *      0:        Success;
+ *      -EFAULT: Invalid chnl_obj or host_buf.
+ *      -EPERM:   User cannot mark EOS on an input channel.
+ *      -ECANCELED: I/O has been cancelled on this channel.  No further
+ *                      I/O is allowed.
+ *      -EPIPE:     End of stream was already marked on a previous
+ *                      IORequest on this channel.  No further I/O is expected.
+ *      -EINVAL: Buffer submitted to this output channel is larger than
+ *                      the size of the physical shared memory output window.
+ *  Requires:
+ *  Ensures:
+ *      0: The buffer will be transferred if the channel is ready;
+ *          otherwise, will be queued for transfer when the channel becomes
+ *          ready.  In any case, notifications of I/O completion are
+ *          asynchronous.
+ *          If byte_size is 0 for an output channel, subsequent CHNL_AddIOReq's
+ *          on this channel will fail with error code -EPIPE.  The
+ *          corresponding IOC for this I/O request will have its status flag
+ *          set to CHNL_IOCSTATEOS.
+ */
+typedef int(*fxn_chnl_addioreq) (struct chnl_object
+					* chnl_obj,
+					void *host_buf,
+					u32 byte_size,
+					u32 buf_size,
+					u32 dw_dsp_addr, u32 dw_arg);
+
+/*
+ *  ======== bridge_chnl_get_ioc ========
+ *  Purpose:
+ *      Dequeue an I/O completion record, which contains information about the
+ *      completed I/O request.
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *      timeout:        A value of CHNL_IOCNOWAIT will simply dequeue the
+ *                      first available IOC.
+ *      chan_ioc:       On output, contains host buffer address, bytes
+ *                      transferred, and status of I/O completion.
+ *      chan_ioc->status:   See chnldefs.h.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT: Invalid chnl_obj or chan_ioc.
+ *      -EREMOTEIO:   CHNL_IOCNOWAIT was specified as the timeout parameter
+ *                      yet no I/O completions were queued.
+ *  Requires:
+ *      timeout == CHNL_IOCNOWAIT.
+ *  Ensures:
+ *      0: if there are any remaining IOC's queued before this call
+ *          returns, the channel event object will be left in a signalled
+ *          state.
+ */
+typedef int(*fxn_chnl_getioc) (struct chnl_object *chnl_obj,
+				      u32 timeout,
+				      struct chnl_ioc *chan_ioc);
+
+/*
+ *  ======== bridge_chnl_cancel_io ========
+ *  Purpose:
+ *      Return all I/O requests to the client which have not yet been
+ *      transferred.  The channel's I/O completion object is
+ *      signalled, and all the I/O requests are queued as IOC's, with the
+ *      status field set to CHNL_IOCSTATCANCEL.
+ *      This call is typically used in abort situations, and is a prelude to
+ *      chnl_close();
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *  Returns:
+ *      0:        Success;
+ *      -EFAULT:    Invalid chnl_obj.
+ *  Requires:
+ *  Ensures:
+ *      Subsequent I/O requests to this channel will not be accepted.
+ */
+typedef int(*fxn_chnl_cancelio) (struct chnl_object *chnl_obj);
+
+/*
+ *  ======== bridge_chnl_flush_io ========
+ *  Purpose:
+ *      For an output stream (to the DSP), indicates if any IO requests are in
+ *      the output request queue.  For input streams (from the DSP), will
+ *      cancel all pending IO requests.
+ *  Parameters:
+ *      chnl_obj:              Channel object handle.
+ *      timeout:            Timeout value for flush operation.
+ *  Returns:
+ *      0:            Success;
+ *      S_CHNLIOREQUEST:    Returned if any IORequests are in the output queue.
+ *      -EFAULT:        Invalid chnl_obj.
+ *  Requires:
+ *  Ensures:
+ *      0:            No I/O requests will be pending on this channel.
+ */
+typedef int(*fxn_chnl_flushio) (struct chnl_object *chnl_obj,
+				       u32 timeout);
+
+/*
+ *  ======== bridge_chnl_get_info ========
+ *  Purpose:
+ *      Retrieve information related to a channel.
+ *  Parameters:
+ *      chnl_obj:          Handle to a valid channel object, or NULL.
+ *      channel_info:   Location to store channel info.
+ *  Returns:
+ *      0:        Success;
+ *      -EFAULT: Invalid chnl_obj or channel_info.
+ *  Requires:
+ *  Ensures:
+ *      0:        channel_info points to a filled in chnl_info struct,
+ *                      if (channel_info != NULL).
+ */
+typedef int(*fxn_chnl_getinfo) (struct chnl_object *chnl_obj,
+				       struct chnl_info *channel_info);
+
+/*
+ *  ======== bridge_chnl_get_mgr_info ========
+ *  Purpose:
+ *      Retrieve information related to the channel manager.
+ *  Parameters:
+ *      hchnl_mgr:           Handle to a valid channel manager, or NULL.
+ *      ch_id:            Channel ID.
+ *      mgr_info:           Location to store channel manager info.
+ *  Returns:
+ *      0:            Success;
+ *      -EFAULT: Invalid hchnl_mgr or mgr_info.
+ *      -ECHRNG:   Invalid channel ID.
+ *  Requires:
+ *  Ensures:
+ *      0:            mgr_info points to a filled in chnl_mgrinfo
+ *                          struct, if (mgr_info != NULL).
+ */
+typedef int(*fxn_chnl_getmgrinfo) (struct chnl_mgr
+					  * hchnl_mgr,
+					  u32 ch_id,
+					  struct chnl_mgrinfo *mgr_info);
+
+/*
+ *  ======== bridge_chnl_idle ========
+ *  Purpose:
+ *      Idle a channel. If this is an input channel, or if this is an output
+ *      channel and flush_data is TRUE, all currently enqueued buffers will be
+ *      dequeued (data discarded for output channel).
+ *      If this is an output channel and flush_data is FALSE, this function
+ *      will block until all currently buffered data is output, or the timeout
+ *      specified has been reached.
+ *
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *      timeout:        If output channel and flush_data is FALSE, timeout value
+ *                      to wait for buffers to be output. (Not used for
+ *                      input channel).
+ *      flush_data:     If output channel and flush_data is TRUE, discard any
+ *                      currently buffered data. If FALSE, wait for currently
+ *                      buffered data to be output, or timeout, whichever
+ *                      occurs first. flush_data is ignored for input channel.
+ *  Returns:
+ *      0:            Success;
+ *      -EFAULT:        Invalid chnl_obj.
+ *      -ETIMEDOUT: Timeout occured before channel could be idled.
+ *  Requires:
+ *  Ensures:
+ */
+typedef int(*fxn_chnl_idle) (struct chnl_object *chnl_obj,
+				    u32 timeout, bool flush_data);
+
+/*
+ *  ======== bridge_chnl_register_notify ========
+ *  Purpose:
+ *      Register for notification of events on a channel.
+ *  Parameters:
+ *      chnl_obj:          Channel object handle.
+ *      event_mask:     Type of events to be notified about: IO completion
+ *                      (DSP_STREAMIOCOMPLETION) or end of stream
+ *                      (DSP_STREAMDONE).
+ *      notify_type:    DSP_SIGNALEVENT.
+ *      hnotification:  Handle of a dsp_notification object.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Insufficient memory.
+ *      -EINVAL:     event_mask is 0 and hnotification was not
+ *                      previously registered.
+ *      -EFAULT:    NULL hnotification, hnotification event name
+ *                      too long, or hnotification event name NULL.
+ *  Requires:
+ *      Valid chnl_obj.
+ *      hnotification != NULL.
+ *      (event_mask & ~(DSP_STREAMIOCOMPLETION | DSP_STREAMDONE)) == 0.
+ *      notify_type == DSP_SIGNALEVENT.
+ *  Ensures:
+ */
+typedef int(*fxn_chnl_registernotify)
+ (struct chnl_object *chnl_obj,
+  u32 event_mask, u32 notify_type, struct dsp_notification *hnotification);
+
+/*
+ *  ======== bridge_dev_create ========
+ *  Purpose:
+ *      Complete creation of the device object for this board.
+ *  Parameters:
+ *      device_ctx:     Ptr to location to store a Bridge device context.
+ *      hdev_obj:     Handle to a Device Object, created and managed by DSP API.
+ *      config_param:        Ptr to configuration parameters provided by the
+ *                      Configuration Manager during device loading.
+ *      pDspConfig:     DSP resources, as specified in the registry key for this
+ *                      device.
+ *  Returns:
+ *      0:            Success.
+ *      -ENOMEM:        Unable to allocate memory for device context.
+ *  Requires:
+ *      device_ctx != NULL;
+ *      hdev_obj != NULL;
+ *      config_param != NULL;
+ *      pDspConfig != NULL;
+ *      Fields in config_param and pDspConfig contain valid values.
+ *  Ensures:
+ *      0:        All Bridge driver specific DSP resource and other
+ *                      board context has been allocated.
+ *      -ENOMEM:    Bridge failed to allocate resources.
+ *                      Any acquired resources have been freed.  The DSP API
+ *                      will not call bridge_dev_destroy() if
+ *                      bridge_dev_create() fails.
+ *  Details:
+ *      Called during the CONFIGMG's Device_Init phase. Based on host and
+ *      DSP configuration information, create a board context, a handle to
+ *      which is passed into other Bridge BRD and CHNL functions.  The
+ *      board context contains state information for the device. Since the
+ *      addresses of all pointer parameters may be invalid when this
+ *      function returns, they must not be stored into the device context
+ *      structure.
+ */
+typedef int(*fxn_dev_create) (struct bridge_dev_context
+				     **device_ctx,
+				     struct dev_object
+				     * hdev_obj,
+				     struct cfg_hostres
+				     * config_param);
+
+/*
+ *  ======== bridge_dev_ctrl ========
+ *  Purpose:
+ *      Bridge driver specific interface.
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      dw_cmd:          Bridge driver defined command code.
+ *      pargs:          Pointer to an arbitrary argument structure.
+ *  Returns:
+ *      0 or -EPERM. Actual command error codes should be passed back in
+ *      the pargs structure, and are defined by the Bridge driver implementor.
+ *  Requires:
+ *      All calls are currently assumed to be synchronous.  There are no
+ *      IOCTL completion routines provided.
+ *  Ensures:
+ */
+typedef int(*fxn_dev_ctrl) (struct bridge_dev_context *dev_ctxt,
+				   u32 dw_cmd, void *pargs);
+
+/*
+ *  ======== bridge_dev_destroy ========
+ *  Purpose:
+ *      Deallocate Bridge device extension structures and all other resources
+ *      acquired by the Bridge driver.
+ *      No calls to other Bridge driver functions may subsequently
+ *      occur, except for bridge_dev_create().
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device information.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Failed to release a resource previously acquired.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ *      0: Device context is freed.
+ */
+typedef int(*fxn_dev_destroy) (struct bridge_dev_context *dev_ctxt);
+
+/*
+ *  ======== bridge_io_create ========
+ *  Purpose:
+ *      Create an object that manages I/O between CHNL and msg_ctrl.
+ *  Parameters:
+ *      io_man:         Location to store IO manager on output.
+ *      hchnl_mgr:       Handle to channel manager.
+ *      hmsg_mgr:        Handle to message manager.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Memory allocation failure.
+ *      -EPERM:      Creation failed.
+ *  Requires:
+ *      hdev_obj != NULL;
+ *      Channel manager already created;
+ *      Message manager already created;
+ *      mgr_attrts != NULL;
+ *      io_man != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_io_create) (struct io_mgr **io_man,
+				    struct dev_object *hdev_obj,
+				    const struct io_attrs *mgr_attrts);
+
+/*
+ *  ======== bridge_io_destroy ========
+ *  Purpose:
+ *      Destroy object created in bridge_io_create.
+ *  Parameters:
+ *      hio_mgr:         IO Manager.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Memory allocation failure.
+ *      -EPERM:      Creation failed.
+ *  Requires:
+ *      Valid hio_mgr;
+ *  Ensures:
+ */
+typedef int(*fxn_io_destroy) (struct io_mgr *hio_mgr);
+
+/*
+ *  ======== bridge_io_on_loaded ========
+ *  Purpose:
+ *      Called whenever a program is loaded to update internal data. For
+ *      example, if shared memory is used, this function would update the
+ *      shared memory location and address.
+ *  Parameters:
+ *      hio_mgr:     IO Manager.
+ *  Returns:
+ *      0:    Success.
+ *      -EPERM:  Internal failure occurred.
+ *  Requires:
+ *      Valid hio_mgr;
+ *  Ensures:
+ */
+typedef int(*fxn_io_onloaded) (struct io_mgr *hio_mgr);
+
+/*
+ *  ======== fxn_io_getprocload ========
+ *  Purpose:
+ *      Called to get the Processor's current and predicted load
+ *  Parameters:
+ *      hio_mgr:     IO Manager.
+ *      proc_load_stat   Processor Load statistics
+ *  Returns:
+ *      0:    Success.
+ *      -EPERM:  Internal failure occurred.
+ *  Requires:
+ *      Valid hio_mgr;
+ *  Ensures:
+ */
+typedef int(*fxn_io_getprocload) (struct io_mgr *hio_mgr,
+					 struct dsp_procloadstat *
+					 proc_load_stat);
+
+/*
+ *  ======== bridge_msg_create ========
+ *  Purpose:
+ *      Create an object to manage message queues. Only one of these objects
+ *      can exist per device object.
+ *  Parameters:
+ *      msg_man:            Location to store msg_ctrl manager on output.
+ *      hdev_obj:         Handle to a device object.
+ *      msg_callback:        Called whenever an RMS_EXIT message is received.
+ *  Returns:
+ *      0:            Success.
+ *      -ENOMEM:        Insufficient memory.
+ *  Requires:
+ *      msg_man != NULL.
+ *      msg_callback != NULL.
+ *      hdev_obj != NULL.
+ *  Ensures:
+ */
+typedef int(*fxn_msg_create)
+ (struct msg_mgr **msg_man,
+  struct dev_object *hdev_obj, msg_onexit msg_callback);
+
+/*
+ *  ======== bridge_msg_create_queue ========
+ *  Purpose:
+ *      Create a msg_ctrl queue for sending or receiving messages from a Message
+ *      node on the DSP.
+ *  Parameters:
+ *      hmsg_mgr:            msg_ctrl queue manager handle returned from
+ *                          bridge_msg_create.
+ *      msgq:               Location to store msg_ctrl queue on output.
+ *      msgq_id:	    Identifier for messages (node environment pointer).
+ *      max_msgs:           Max number of simultaneous messages for the node.
+ *      h:                  Handle passed to hmsg_mgr->msg_callback().
+ *  Returns:
+ *      0:            Success.
+ *      -ENOMEM:        Insufficient memory.
+ *  Requires:
+ *      msgq != NULL.
+ *      h != NULL.
+ *      max_msgs > 0.
+ *  Ensures:
+ *      msgq !=NULL <==> 0.
+ */
+typedef int(*fxn_msg_createqueue)
+ (struct msg_mgr *hmsg_mgr,
+  struct msg_queue **msgq, u32 msgq_id, u32 max_msgs, void *h);
+
+/*
+ *  ======== bridge_msg_delete ========
+ *  Purpose:
+ *      Delete a msg_ctrl manager allocated in bridge_msg_create().
+ *  Parameters:
+ *      hmsg_mgr:    Handle returned from bridge_msg_create().
+ *  Returns:
+ *  Requires:
+ *      Valid hmsg_mgr.
+ *  Ensures:
+ */
+typedef void (*fxn_msg_delete) (struct msg_mgr *hmsg_mgr);
+
+/*
+ *  ======== bridge_msg_delete_queue ========
+ *  Purpose:
+ *      Delete a msg_ctrl queue allocated in bridge_msg_create_queue.
+ *  Parameters:
+ *      msg_queue_obj:  Handle to msg_ctrl queue returned from
+ *                  bridge_msg_create_queue.
+ *  Returns:
+ *  Requires:
+ *      Valid msg_queue_obj.
+ *  Ensures:
+ */
+typedef void (*fxn_msg_deletequeue) (struct msg_queue *msg_queue_obj);
+
+/*
+ *  ======== bridge_msg_get ========
+ *  Purpose:
+ *      Get a message from a msg_ctrl queue.
+ *  Parameters:
+ *      msg_queue_obj:     Handle to msg_ctrl queue returned from
+ *                     bridge_msg_create_queue.
+ *      pmsg:          Location to copy message into.
+ *      utimeout:      Timeout to wait for a message.
+ *  Returns:
+ *      0:       Success.
+ *      -ETIME:  Timeout occurred.
+ *      -EPERM:     No frames available for message (max_msgs too
+ *                     small).
+ *  Requires:
+ *      Valid msg_queue_obj.
+ *      pmsg != NULL.
+ *  Ensures:
+ */
+typedef int(*fxn_msg_get) (struct msg_queue *msg_queue_obj,
+				  struct dsp_msg *pmsg, u32 utimeout);
+
+/*
+ *  ======== bridge_msg_put ========
+ *  Purpose:
+ *      Put a message onto a msg_ctrl queue.
+ *  Parameters:
+ *      msg_queue_obj:      Handle to msg_ctrl queue returned from
+ *                      bridge_msg_create_queue.
+ *      pmsg:           Pointer to message.
+ *      utimeout:       Timeout to wait for a message.
+ *  Returns:
+ *      0:        Success.
+ *      -ETIME:   Timeout occurred.
+ *      -EPERM:      No frames available for message (max_msgs too
+ *                      small).
+ *  Requires:
+ *      Valid msg_queue_obj.
+ *      pmsg != NULL.
+ *  Ensures:
+ */
+typedef int(*fxn_msg_put) (struct msg_queue *msg_queue_obj,
+				  const struct dsp_msg *pmsg, u32 utimeout);
+
+/*
+ *  ======== bridge_msg_register_notify ========
+ *  Purpose:
+ *      Register notification for when a message is ready.
+ *  Parameters:
+ *      msg_queue_obj:      Handle to msg_ctrl queue returned from
+ *                      bridge_msg_create_queue.
+ *      event_mask:     Type of events to be notified about: Must be
+ *                      DSP_NODEMESSAGEREADY, or 0 to unregister.
+ *      notify_type:    DSP_SIGNALEVENT.
+ *      hnotification:  Handle of notification object.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Insufficient memory.
+ *  Requires:
+ *      Valid msg_queue_obj.
+ *      hnotification != NULL.
+ *      notify_type == DSP_SIGNALEVENT.
+ *      event_mask == DSP_NODEMESSAGEREADY || event_mask == 0.
+ *  Ensures:
+ */
+typedef int(*fxn_msg_registernotify)
+ (struct msg_queue *msg_queue_obj,
+  u32 event_mask, u32 notify_type, struct dsp_notification *hnotification);
+
+/*
+ *  ======== bridge_msg_set_queue_id ========
+ *  Purpose:
+ *      Set message queue id to node environment. Allows bridge_msg_create_queue
+ *      to be called in node_allocate, before the node environment is known.
+ *  Parameters:
+ *      msg_queue_obj:  Handle to msg_ctrl queue returned from
+ *                  bridge_msg_create_queue.
+ *      msgq_id:       Node environment pointer.
+ *  Returns:
+ *  Requires:
+ *      Valid msg_queue_obj.
+ *      msgq_id != 0.
+ *  Ensures:
+ */
+typedef void (*fxn_msg_setqueueid) (struct msg_queue *msg_queue_obj,
+				    u32 msgq_id);
+
+/*
+ *  Bridge Driver interface function table.
+ *
+ *  The information in this table is filled in by the specific Bridge driver,
+ *  and copied into the DSP API's own space.  If any interface
+ *  function field is set to a value of NULL, then the DSP API will
+ *  consider that function not implemented, and return the error code
+ *  -ENOSYS when a Bridge driver client attempts to call that function.
+ *
+ *  This function table contains DSP API version numbers, which are used by the
+ *  Bridge driver loader to help ensure backwards compatility between older
+ *  Bridge drivers and newer DSP API.  These must be set to
+ *  BRD_API_MAJOR_VERSION and BRD_API_MINOR_VERSION, respectively.
+ *
+ *  A Bridge driver need not export a CHNL interface.  In this case, *all* of
+ *  the bridge_chnl_* entries must be set to NULL.
+ */
+struct bridge_drv_interface {
+	u32 brd_api_major_version;	/* Set to BRD_API_MAJOR_VERSION. */
+	u32 brd_api_minor_version;	/* Set to BRD_API_MINOR_VERSION. */
+	fxn_dev_create pfn_dev_create;	/* Create device context */
+	fxn_dev_destroy pfn_dev_destroy;	/* Destroy device context */
+	fxn_dev_ctrl pfn_dev_cntrl;	/* Optional vendor interface */
+	fxn_brd_monitor pfn_brd_monitor;	/* Load and/or start monitor */
+	fxn_brd_start pfn_brd_start;	/* Start DSP program. */
+	fxn_brd_stop pfn_brd_stop;	/* Stop/reset board. */
+	fxn_brd_status pfn_brd_status;	/* Get current board status. */
+	fxn_brd_read pfn_brd_read;	/* Read board memory */
+	fxn_brd_write pfn_brd_write;	/* Write board memory. */
+	fxn_brd_setstate pfn_brd_set_state;	/* Sets the Board State */
+	fxn_brd_memcopy pfn_brd_mem_copy;	/* Copies DSP Memory */
+	fxn_brd_memwrite pfn_brd_mem_write;	/* Write DSP Memory w/o halt */
+	fxn_brd_memmap pfn_brd_mem_map;	/* Maps MPU mem to DSP mem */
+	fxn_brd_memunmap pfn_brd_mem_un_map;	/* Unmaps MPU mem to DSP mem */
+	fxn_chnl_create pfn_chnl_create;	/* Create channel manager. */
+	fxn_chnl_destroy pfn_chnl_destroy;	/* Destroy channel manager. */
+	fxn_chnl_open pfn_chnl_open;	/* Create a new channel. */
+	fxn_chnl_close pfn_chnl_close;	/* Close a channel. */
+	fxn_chnl_addioreq pfn_chnl_add_io_req;	/* Req I/O on a channel. */
+	fxn_chnl_getioc pfn_chnl_get_ioc;	/* Wait for I/O completion. */
+	fxn_chnl_cancelio pfn_chnl_cancel_io;	/* Cancl I/O on a channel. */
+	fxn_chnl_flushio pfn_chnl_flush_io;	/* Flush I/O. */
+	fxn_chnl_getinfo pfn_chnl_get_info;	/* Get channel specific info */
+	/* Get channel manager info. */
+	fxn_chnl_getmgrinfo pfn_chnl_get_mgr_info;
+	fxn_chnl_idle pfn_chnl_idle;	/* Idle the channel */
+	/* Register for notif. */
+	fxn_chnl_registernotify pfn_chnl_register_notify;
+	fxn_io_create pfn_io_create;	/* Create IO manager */
+	fxn_io_destroy pfn_io_destroy;	/* Destroy IO manager */
+	fxn_io_onloaded pfn_io_on_loaded;	/* Notify of program loaded */
+	/* Get Processor's current and predicted load */
+	fxn_io_getprocload pfn_io_get_proc_load;
+	fxn_msg_create pfn_msg_create;	/* Create message manager */
+	/* Create message queue */
+	fxn_msg_createqueue pfn_msg_create_queue;
+	fxn_msg_delete pfn_msg_delete;	/* Delete message manager */
+	/* Delete message queue */
+	fxn_msg_deletequeue pfn_msg_delete_queue;
+	fxn_msg_get pfn_msg_get;	/* Get a message */
+	fxn_msg_put pfn_msg_put;	/* Send a message */
+	/* Register for notif. */
+	fxn_msg_registernotify pfn_msg_register_notify;
+	/* Set message queue id */
+	fxn_msg_setqueueid pfn_msg_set_queue_id;
+};
+
+/*
+ *  ======== bridge_drv_entry ========
+ *  Purpose:
+ *      Registers Bridge driver functions with the DSP API. Called only once
+ *      by the DSP API.  The caller will first check DSP API version
+ *      compatibility, and then copy the interface functions into its own
+ *      memory space.
+ *  Parameters:
+ *      drv_intf  Pointer to a location to receive a pointer to the
+ *                      Bridge driver interface.
+ *  Returns:
+ *  Requires:
+ *      The code segment this function resides in must expect to be discarded
+ *      after completion.
+ *  Ensures:
+ *      drv_intf pointer initialized to Bridge driver's function
+ *      interface. No system resources are acquired by this function.
+ *  Details:
+ *      Called during the Device_Init phase.
+ */
+void bridge_drv_entry(struct bridge_drv_interface **drv_intf,
+		   const char *driver_file_name);
+
+#endif /* DSPDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdeh.h b/drivers/staging/tidspbridge/include/dspbridge/dspdeh.h
new file mode 100644
index 00000000000..d258ab6a41d
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdeh.h
@@ -0,0 +1,43 @@
+/*
+ * dspdeh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Defines upper edge DEH functions required by all Bridge driver/DSP API
+ * interface tables.
+ *
+ * Notes:
+ *   Function comment headers reside with the function typedefs in dspdefs.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ * Copyright (C) 2010 Felipe Contreras
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPDEH_
+#define DSPDEH_
+
+struct deh_mgr;
+struct dev_object;
+struct dsp_notification;
+
+int bridge_deh_create(struct deh_mgr **ret_deh,
+		struct dev_object *hdev_obj);
+
+int bridge_deh_destroy(struct deh_mgr *deh);
+
+int bridge_deh_register_notify(struct deh_mgr *deh,
+		u32 event_mask,
+		u32 notify_type,
+		struct dsp_notification *hnotification);
+
+void bridge_deh_notify(struct deh_mgr *deh, int event, int info);
+
+#endif /* DSPDEH_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdrv.h b/drivers/staging/tidspbridge/include/dspbridge/dspdrv.h
new file mode 100644
index 00000000000..0bb250f95ba
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdrv.h
@@ -0,0 +1,62 @@
+/*
+ * dspdrv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This is the Stream Interface for the DSp API.
+ * All Device operations are performed via DeviceIOControl.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#if !defined _DSPDRV_H_
+#define _DSPDRV_H_
+
+#define MAX_DEV     10		/* Max support of 10 devices */
+
+/*
+ *  ======== dsp_deinit ========
+ *  Purpose:
+ *      This function is called by Device Manager to de-initialize a device.
+ *      This function is not called by applications.
+ *  Parameters:
+ *      device_context:Handle to the device context. The XXX_Init function
+ *      creates and returns this identifier.
+ *  Returns:
+ *      TRUE indicates the device successfully de-initialized. Otherwise it
+ *      returns FALSE.
+ *  Requires:
+ *      device_context!= NULL. For a built in device this should never
+ *      get called.
+ *  Ensures:
+ */
+extern bool dsp_deinit(u32 device_context);
+
+/*
+ *  ======== dsp_init ========
+ *  Purpose:
+ *      This function is called by Device Manager to initialize a device.
+ *      This function is not called by applications
+ *  Parameters:
+ *      dw_context:  Specifies a pointer to a string containing the registry
+ *                  path to the active key for the stream interface driver.
+ *                  HKEY_LOCAL_MACHINE\Drivers\Active
+ *  Returns:
+ *      Returns a handle to the device context created. This is the our actual
+ *      Device Object representing the DSP Device instance.
+ *  Requires:
+ *  Ensures:
+ *      Succeeded:  device context > 0
+ *      Failed:     device Context = 0
+ */
+extern u32 dsp_init(u32 *init_status);
+
+#endif
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspio.h b/drivers/staging/tidspbridge/include/dspbridge/dspio.h
new file mode 100644
index 00000000000..88f5f90fe92
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspio.h
@@ -0,0 +1,41 @@
+/*
+ * dspio.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Declares the upper edge IO functions required by all Bridge driver /DSP API
+ * interface tables.
+ *
+ * Notes:
+ *   Function comment headers reside in dspdefs.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPIO_
+#define DSPIO_
+
+#include <dspbridge/devdefs.h>
+#include <dspbridge/iodefs.h>
+
+extern int bridge_io_create(struct io_mgr **io_man,
+				   struct dev_object *hdev_obj,
+				   const struct io_attrs *mgr_attrts);
+
+extern int bridge_io_destroy(struct io_mgr *hio_mgr);
+
+extern int bridge_io_on_loaded(struct io_mgr *hio_mgr);
+
+extern int iva_io_on_loaded(struct io_mgr *hio_mgr);
+extern int bridge_io_get_proc_load(struct io_mgr *hio_mgr,
+				       struct dsp_procloadstat *proc_lstat);
+
+#endif /* DSPIO_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
new file mode 100644
index 00000000000..41e0594dff3
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
@@ -0,0 +1,73 @@
+/*
+ * dspioctl.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Bridge driver BRD_IOCtl reserved command definitions.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPIOCTL_
+#define DSPIOCTL_
+
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
+/*
+ * Any IOCTLS at or above this value are reserved for standard Bridge driver
+ * interfaces.
+ */
+#define BRDIOCTL_RESERVEDBASE       0x8000
+
+#define BRDIOCTL_CHNLREAD           (BRDIOCTL_RESERVEDBASE + 0x10)
+#define BRDIOCTL_CHNLWRITE          (BRDIOCTL_RESERVEDBASE + 0x20)
+#define BRDIOCTL_GETINTRCOUNT       (BRDIOCTL_RESERVEDBASE + 0x30)
+#define BRDIOCTL_RESETINTRCOUNT     (BRDIOCTL_RESERVEDBASE + 0x40)
+#define BRDIOCTL_INTERRUPTDSP       (BRDIOCTL_RESERVEDBASE + 0x50)
+/* DMMU */
+#define BRDIOCTL_SETMMUCONFIG       (BRDIOCTL_RESERVEDBASE + 0x60)
+/* PWR */
+#define BRDIOCTL_PWRCONTROL         (BRDIOCTL_RESERVEDBASE + 0x70)
+
+/* attention, modifiers:
+ * Some of these control enumerations are made visible to user for power
+ * control, so any changes to this list, should also be updated in the user
+ * header file 'dbdefs.h' ***/
+/* These ioctls are reserved for PWR power commands for the DSP */
+#define BRDIOCTL_DEEPSLEEP          (BRDIOCTL_PWRCONTROL + 0x0)
+#define BRDIOCTL_EMERGENCYSLEEP     (BRDIOCTL_PWRCONTROL + 0x1)
+#define BRDIOCTL_WAKEUP             (BRDIOCTL_PWRCONTROL + 0x2)
+#define BRDIOCTL_PWRENABLE          (BRDIOCTL_PWRCONTROL + 0x3)
+#define BRDIOCTL_PWRDISABLE         (BRDIOCTL_PWRCONTROL + 0x4)
+#define BRDIOCTL_CLK_CTRL		    (BRDIOCTL_PWRCONTROL + 0x7)
+/* DSP Initiated Hibernate */
+#define BRDIOCTL_PWR_HIBERNATE	(BRDIOCTL_PWRCONTROL + 0x8)
+#define BRDIOCTL_PRESCALE_NOTIFY (BRDIOCTL_PWRCONTROL + 0x9)
+#define BRDIOCTL_POSTSCALE_NOTIFY (BRDIOCTL_PWRCONTROL + 0xA)
+#define BRDIOCTL_CONSTRAINT_REQUEST (BRDIOCTL_PWRCONTROL + 0xB)
+
+/* Number of actual DSP-MMU TLB entrries */
+#define BRDIOCTL_NUMOFMMUTLB        32
+
+struct bridge_ioctl_extproc {
+	u32 ul_dsp_va;		/* DSP virtual address */
+	u32 ul_gpp_pa;		/* GPP physical address */
+	/* GPP virtual address. __va does not work for ioremapped addresses */
+	u32 ul_gpp_va;
+	u32 ul_size;		/* Size of the mapped memory in bytes */
+	enum hw_endianism_t endianism;
+	enum hw_mmu_mixed_size_t mixed_mode;
+	enum hw_element_size_t elem_size;
+};
+
+#endif /* DSPIOCTL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspmsg.h b/drivers/staging/tidspbridge/include/dspbridge/dspmsg.h
new file mode 100644
index 00000000000..d4bd458bc8b
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspmsg.h
@@ -0,0 +1,56 @@
+/*
+ * dspmsg.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Declares the upper edge message class library functions required by
+ * all Bridge driver / DSP API interface tables.  These functions are
+ * implemented by every class of Bridge driver channel library.
+ *
+ * Notes:
+ *   Function comment headers reside in dspdefs.h.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DSPMSG_
+#define DSPMSG_
+
+#include <dspbridge/msgdefs.h>
+
+extern int bridge_msg_create(struct msg_mgr **msg_man,
+				    struct dev_object *hdev_obj,
+				    msg_onexit msg_callback);
+
+extern int bridge_msg_create_queue(struct msg_mgr *hmsg_mgr,
+				       struct msg_queue **msgq,
+				       u32 msgq_id, u32 max_msgs, void *arg);
+
+extern void bridge_msg_delete(struct msg_mgr *hmsg_mgr);
+
+extern void bridge_msg_delete_queue(struct msg_queue *msg_queue_obj);
+
+extern int bridge_msg_get(struct msg_queue *msg_queue_obj,
+				 struct dsp_msg *pmsg, u32 utimeout);
+
+extern int bridge_msg_put(struct msg_queue *msg_queue_obj,
+				 const struct dsp_msg *pmsg, u32 utimeout);
+
+extern int bridge_msg_register_notify(struct msg_queue *msg_queue_obj,
+					  u32 event_mask,
+					  u32 notify_type,
+					  struct dsp_notification
+					  *hnotification);
+
+extern void bridge_msg_set_queue_id(struct msg_queue *msg_queue_obj,
+					u32 msgq_id);
+
+#endif /* DSPMSG_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dynamic_loader.h b/drivers/staging/tidspbridge/include/dspbridge/dynamic_loader.h
new file mode 100644
index 00000000000..4b109d173b1
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dynamic_loader.h
@@ -0,0 +1,492 @@
+/*
+ * dynamic_loader.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _DYNAMIC_LOADER_H_
+#define _DYNAMIC_LOADER_H_
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+/*
+ * Dynamic Loader
+ *
+ * The function of the dynamic loader is to load a "module" containing
+ * instructions for a "target" processor into that processor.  In the process
+ * it assigns memory for the module, resolves symbol references made by the
+ * module, and remembers symbols defined by the module.
+ *
+ * The dynamic loader is parameterized for a particular system by 4 classes
+ * that supply the module and system specific functions it requires
+ */
+	/* The read functions for the module image to be loaded */
+struct dynamic_loader_stream;
+
+	/* This class defines "host" symbol and support functions */
+struct dynamic_loader_sym;
+
+	/* This class defines the allocator for "target" memory */
+struct dynamic_loader_allocate;
+
+	/* This class defines the copy-into-target-memory functions */
+struct dynamic_loader_initialize;
+
+/*
+ * Option flags to modify the behavior of module loading
+ */
+#define DLOAD_INITBSS 0x1	/* initialize BSS sections to zero */
+#define DLOAD_BIGEND 0x2	/* require big-endian load module */
+#define DLOAD_LITTLE 0x4	/* require little-endian load module */
+
+/*****************************************************************************
+ * Procedure dynamic_load_module
+ *
+ * Parameters:
+ *  module  The input stream that supplies the module image
+ *  syms    Host-side symbol table and malloc/free functions
+ *  alloc   Target-side memory allocation
+ *  init    Target-side memory initialization, or NULL for symbol read only
+ *  options Option flags DLOAD_*
+ *  mhandle A module handle for use with Dynamic_Unload
+ *
+ * Effect:
+ *  The module image is read using *module.  Target storage for the new image is
+ * obtained from *alloc.  Symbols defined and referenced by the module are
+ * managed using *syms.  The image is then relocated and references resolved
+ * as necessary, and the resulting executable bits are placed into target memory
+ * using *init.
+ *
+ * Returns:
+ *  On a successful load, a module handle is placed in *mhandle, and zero is
+ * returned.  On error, the number of errors detected is returned.  Individual
+ * errors are reported during the load process using syms->error_report().
+ **************************************************************************** */
+extern int dynamic_load_module(
+				      /* the source for the module image */
+				      struct dynamic_loader_stream *module,
+				      /* host support for symbols and storage */
+				      struct dynamic_loader_sym *syms,
+				      /* the target memory allocator */
+				      struct dynamic_loader_allocate *alloc,
+				      /* the target memory initializer */
+				      struct dynamic_loader_initialize *init,
+				      unsigned options,	/* option flags */
+				      /* the returned module handle */
+				      void **mhandle);
+
+/*****************************************************************************
+ * Procedure dynamic_open_module
+ *
+ * Parameters:
+ *  module  The input stream that supplies the module image
+ *  syms    Host-side symbol table and malloc/free functions
+ *  alloc   Target-side memory allocation
+ *  init    Target-side memory initialization, or NULL for symbol read only
+ *  options Option flags DLOAD_*
+ *  mhandle A module handle for use with Dynamic_Unload
+ *
+ * Effect:
+ *  The module image is read using *module.  Target storage for the new image is
+ * obtained from *alloc.  Symbols defined and referenced by the module are
+ * managed using *syms.  The image is then relocated and references resolved
+ * as necessary, and the resulting executable bits are placed into target memory
+ * using *init.
+ *
+ * Returns:
+ *  On a successful load, a module handle is placed in *mhandle, and zero is
+ * returned.  On error, the number of errors detected is returned.  Individual
+ * errors are reported during the load process using syms->error_report().
+ **************************************************************************** */
+extern int dynamic_open_module(
+				      /* the source for the module image */
+				      struct dynamic_loader_stream *module,
+				      /* host support for symbols and storage */
+				      struct dynamic_loader_sym *syms,
+				      /* the target memory allocator */
+				      struct dynamic_loader_allocate *alloc,
+				      /* the target memory initializer */
+				      struct dynamic_loader_initialize *init,
+				      unsigned options,	/* option flags */
+				      /* the returned module handle */
+				      void **mhandle);
+
+/*****************************************************************************
+ * Procedure dynamic_unload_module
+ *
+ * Parameters:
+ *  mhandle A module handle from dynamic_load_module
+ *  syms    Host-side symbol table and malloc/free functions
+ *  alloc   Target-side memory allocation
+ *
+ * Effect:
+ *  The module specified by mhandle is unloaded.  Unloading causes all
+ * target memory to be deallocated, all symbols defined by the module to
+ * be purged, and any host-side storage used by the dynamic loader for
+ * this module to be released.
+ *
+ * Returns:
+ *  Zero for success. On error, the number of errors detected is returned.
+ * Individual errors are reported using syms->error_report().
+ **************************************************************************** */
+extern int dynamic_unload_module(void *mhandle,	/* the module
+							 * handle */
+				 /* host support for symbols and
+				  * storage */
+				 struct dynamic_loader_sym *syms,
+				 /* the target memory allocator */
+				 struct dynamic_loader_allocate *alloc,
+				 /* the target memory initializer */
+				 struct dynamic_loader_initialize *init);
+
+/*****************************************************************************
+ *****************************************************************************
+ * A class used by the dynamic loader for input of the module image
+ *****************************************************************************
+ **************************************************************************** */
+struct dynamic_loader_stream {
+/* public: */
+    /*************************************************************************
+     * read_buffer
+     *
+     * PARAMETERS :
+     *  buffer  Pointer to the buffer to fill
+     *  bufsiz  Amount of data desired in sizeof() units
+     *
+     * EFFECT :
+     *  Reads the specified amount of data from the module input stream
+     * into the specified buffer.  Returns the amount of data read in sizeof()
+     * units (which if less than the specification, represents an error).
+     *
+     * NOTES:
+     *  In release 1 increments the file position by the number of bytes read
+     *
+     ************************************************************************ */
+	int (*read_buffer) (struct dynamic_loader_stream *thisptr,
+			    void *buffer, unsigned bufsiz);
+
+    /*************************************************************************
+     * set_file_posn (release 1 only)
+     *
+     * PARAMETERS :
+     *  posn  Desired file position relative to start of file in sizeof() units.
+     *
+     * EFFECT :
+     *  Adjusts the internal state of the stream object so that the next
+     * read_buffer call will begin to read at the specified offset from
+     * the beginning of the input module.  Returns 0 for success, non-zero
+     * for failure.
+     *
+     ************************************************************************ */
+	int (*set_file_posn) (struct dynamic_loader_stream *thisptr,
+			      /* to be eliminated in release 2 */
+			      unsigned int posn);
+
+};
+
+/*****************************************************************************
+ *****************************************************************************
+ * A class used by the dynamic loader for symbol table support and
+ * miscellaneous host-side functions
+ *****************************************************************************
+ **************************************************************************** */
+
+typedef u32 ldr_addr;
+
+/*
+ * the structure of a symbol known to the dynamic loader
+ */
+struct dynload_symbol {
+	ldr_addr value;
+};
+
+struct dynamic_loader_sym {
+/* public: */
+    /*************************************************************************
+     * find_matching_symbol
+     *
+     * PARAMETERS :
+     *  name    The name of the desired symbol
+     *
+     * EFFECT :
+     *  Locates a symbol matching the name specified.  A pointer to the
+     * symbol is returned if it exists; 0 is returned if no such symbol is
+     * found.
+     *
+     ************************************************************************ */
+	struct dynload_symbol *(*find_matching_symbol)
+	 (struct dynamic_loader_sym *thisptr, const char *name);
+
+    /*************************************************************************
+     * add_to_symbol_table
+     *
+     * PARAMETERS :
+     *  nname       Pointer to the name of the new symbol
+     *  moduleid    An opaque module id assigned by the dynamic loader
+     *
+     * EFFECT :
+     *  The new symbol is added to the table.  A pointer to the symbol is
+     * returned, or NULL is returned for failure.
+     *
+     * NOTES:
+     *  It is permissible for this function to return NULL; the effect is that
+     * the named symbol will not be available to resolve references in
+     * subsequent loads.  Returning NULL will not cause the current load
+     * to fail.
+     ************************************************************************ */
+	struct dynload_symbol *(*add_to_symbol_table)
+	 (struct dynamic_loader_sym *
+	  thisptr, const char *nname, unsigned moduleid);
+
+    /*************************************************************************
+     * purge_symbol_table
+     *
+     * PARAMETERS :
+     *  moduleid    An opaque module id assigned by the dynamic loader
+     *
+     * EFFECT :
+     *  Each symbol in the symbol table whose moduleid matches the argument
+     * is removed from the table.
+     ************************************************************************ */
+	void (*purge_symbol_table) (struct dynamic_loader_sym *thisptr,
+				    unsigned moduleid);
+
+    /*************************************************************************
+     * dload_allocate
+     *
+     * PARAMETERS :
+     *  memsiz  size of desired memory in sizeof() units
+     *
+     * EFFECT :
+     *  Returns a pointer to some "host" memory for use by the dynamic
+     * loader, or NULL for failure.
+     * This function is serves as a replaceable form of "malloc" to
+     * allow the user to configure the memory usage of the dynamic loader.
+     ************************************************************************ */
+	void *(*dload_allocate) (struct dynamic_loader_sym *thisptr,
+				 unsigned memsiz);
+
+    /*************************************************************************
+     * dload_deallocate
+     *
+     * PARAMETERS :
+     *  memptr  pointer to previously allocated memory
+     *
+     * EFFECT :
+     *  Releases the previously allocated "host" memory.
+     ************************************************************************ */
+	void (*dload_deallocate) (struct dynamic_loader_sym *thisptr,
+				  void *memptr);
+
+    /*************************************************************************
+     * error_report
+     *
+     * PARAMETERS :
+     *  errstr  pointer to an error string
+     *  args    additional arguments
+     *
+     * EFFECT :
+     *  This function provides an error reporting interface for the dynamic
+     * loader.  The error string and arguments are designed as for the
+     * library function vprintf.
+     ************************************************************************ */
+	void (*error_report) (struct dynamic_loader_sym *thisptr,
+			      const char *errstr, va_list args);
+
+};				/* class dynamic_loader_sym */
+
+/*****************************************************************************
+ *****************************************************************************
+ * A class used by the dynamic loader to allocate and deallocate target memory.
+ *****************************************************************************
+ **************************************************************************** */
+
+struct ldr_section_info {
+	/* Name of the memory section assigned at build time */
+	const char *name;
+	ldr_addr run_addr;	/* execution address of the section */
+	ldr_addr load_addr;	/* load address of the section */
+	ldr_addr size;		/* size of the section in addressable units */
+#ifndef _BIG_ENDIAN
+	u16 page;		/* memory page or view */
+	u16 type;		/* one of the section types below */
+#else
+	u16 type;		/* one of the section types below */
+	u16 page;		/* memory page or view */
+#endif
+	/* a context field for use by dynamic_loader_allocate;
+	 *   ignored but maintained by the dynamic loader */
+	u32 context;
+};
+
+/* use this macro to extract type of section from ldr_section_info.type field */
+#define DLOAD_SECTION_TYPE(typeinfo) (typeinfo & 0xF)
+
+/* type of section to be allocated */
+#define DLOAD_TEXT 0
+#define DLOAD_DATA 1
+#define DLOAD_BSS 2
+	/* internal use only, run-time cinit will be of type DLOAD_DATA */
+#define DLOAD_CINIT 3
+
+struct dynamic_loader_allocate {
+/* public: */
+
+    /*************************************************************************
+    * Function allocate
+    *
+    * Parameters:
+    *   info        A pointer to an information block for the section
+    *   align       The alignment of the storage in target AUs
+    *
+    * Effect:
+    *   Allocates target memory for the specified section and fills in the
+    * load_addr and run_addr fields of the section info structure. Returns TRUE
+    * for success, FALSE for failure.
+    *
+    * Notes:
+    *   Frequently load_addr and run_addr are the same, but if they are not
+    * load_addr is used with dynamic_loader_initialize, and run_addr is
+    * used for almost all relocations.  This function should always initialize
+    * both fields.
+    ************************************************************************ */
+	int (*dload_allocate) (struct dynamic_loader_allocate *thisptr,
+			       struct ldr_section_info *info, unsigned align);
+
+    /*************************************************************************
+    * Function deallocate
+    *
+    * Parameters:
+    *   info        A pointer to an information block for the section
+    *
+    * Effect:
+    *   Releases the target memory previously allocated.
+    *
+    * Notes:
+    * The content of the info->name field is undefined on call to this function.
+    ************************************************************************ */
+	void (*dload_deallocate) (struct dynamic_loader_allocate *thisptr,
+				  struct ldr_section_info *info);
+
+};				/* class dynamic_loader_allocate */
+
+/*****************************************************************************
+ *****************************************************************************
+ * A class used by the dynamic loader to load data into a target.  This class
+ * provides the interface-specific functions needed to load data.
+ *****************************************************************************
+ **************************************************************************** */
+
+struct dynamic_loader_initialize {
+/* public: */
+    /*************************************************************************
+    * Function connect
+    *
+    * Parameters:
+    *   none
+    *
+    * Effect:
+    *   Connect to the initialization interface. Returns TRUE for success,
+    * FALSE for failure.
+    *
+    * Notes:
+    *   This function is called prior to use of any other functions in
+    * this interface.
+    ************************************************************************ */
+	int (*connect) (struct dynamic_loader_initialize *thisptr);
+
+    /*************************************************************************
+    * Function readmem
+    *
+    * Parameters:
+    *   bufr        Pointer to a word-aligned buffer for the result
+    *   locn        Target address of first data element
+    *   info        Section info for the section in which the address resides
+    *   bytsiz      Size of the data to be read in sizeof() units
+    *
+    * Effect:
+    *   Fills the specified buffer with data from the target.  Returns TRUE for
+    * success, FALSE for failure.
+    ************************************************************************ */
+	int (*readmem) (struct dynamic_loader_initialize *thisptr,
+			void *bufr,
+			ldr_addr locn,
+			struct ldr_section_info *info, unsigned bytsiz);
+
+    /*************************************************************************
+    * Function writemem
+    *
+    * Parameters:
+    *   bufr        Pointer to a word-aligned buffer of data
+    *   locn        Target address of first data element to be written
+    *   info        Section info for the section in which the address resides
+    *   bytsiz      Size of the data to be written in sizeof() units
+    *
+    * Effect:
+    *   Writes the specified buffer to the target.  Returns TRUE for success,
+    * FALSE for failure.
+    ************************************************************************ */
+	int (*writemem) (struct dynamic_loader_initialize *thisptr,
+			 void *bufr,
+			 ldr_addr locn,
+			 struct ldr_section_info *info, unsigned bytsiz);
+
+    /*************************************************************************
+    * Function fillmem
+    *
+    * Parameters:
+    *   locn        Target address of first data element to be written
+    *   info        Section info for the section in which the address resides
+    *   bytsiz      Size of the data to be written in sizeof() units
+    *   val         Value to be written in each byte
+    * Effect:
+    *   Fills the specified area of target memory.  Returns TRUE for success,
+    * FALSE for failure.
+    ************************************************************************ */
+	int (*fillmem) (struct dynamic_loader_initialize *thisptr,
+			ldr_addr locn, struct ldr_section_info *info,
+			unsigned bytsiz, unsigned val);
+
+    /*************************************************************************
+    * Function execute
+    *
+    * Parameters:
+    *   start       Starting address
+    *
+    * Effect:
+    *   The target code at the specified starting address is executed.
+    *
+    * Notes:
+    *   This function is called at the end of the dynamic load process
+    * if the input module has specified a starting address.
+    ************************************************************************ */
+	int (*execute) (struct dynamic_loader_initialize *thisptr,
+			ldr_addr start);
+
+    /*************************************************************************
+    * Function release
+    *
+    * Parameters:
+    *   none
+    *
+    * Effect:
+    *   Releases the connection to the load interface.
+    *
+    * Notes:
+    *   This function is called at the end of the dynamic load process.
+    ************************************************************************ */
+	void (*release) (struct dynamic_loader_initialize *thisptr);
+
+};				/* class dynamic_loader_initialize */
+
+#endif /* _DYNAMIC_LOADER_H_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/gb.h b/drivers/staging/tidspbridge/include/dspbridge/gb.h
new file mode 100644
index 00000000000..fda783aa160
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/gb.h
@@ -0,0 +1,79 @@
+/*
+ * gb.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Generic bitmap manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef GB_
+#define GB_
+
+#define GB_NOBITS (~0)
+#include <dspbridge/host_os.h>
+
+struct gb_t_map;
+
+/*
+ *  ======== gb_clear ========
+ *  Clear the bit in position bitn in the bitmap map.  Bit positions are
+ *  zero based.
+ */
+
+extern void gb_clear(struct gb_t_map *map, u32 bitn);
+
+/*
+ *  ======== gb_create ========
+ *  Create a bit map with len bits.  Initially all bits are cleared.
+ */
+
+extern struct gb_t_map *gb_create(u32 len);
+
+/*
+ *  ======== gb_delete ========
+ *  Delete previously created bit map
+ */
+
+extern void gb_delete(struct gb_t_map *map);
+
+/*
+ *  ======== gb_findandset ========
+ *  Finds a clear bit, sets it, and returns the position
+ */
+
+extern u32 gb_findandset(struct gb_t_map *map);
+
+/*
+ *  ======== gb_minclear ========
+ *  gb_minclear returns the minimum clear bit position.  If no bit is
+ *  clear, gb_minclear returns -1.
+ */
+extern u32 gb_minclear(struct gb_t_map *map);
+
+/*
+ *  ======== gb_set ========
+ *  Set the bit in position bitn in the bitmap map.  Bit positions are
+ *  zero based.
+ */
+
+extern void gb_set(struct gb_t_map *map, u32 bitn);
+
+/*
+ *  ======== gb_test ========
+ *  Returns TRUE if the bit in position bitn is set in map; otherwise
+ *  gb_test returns FALSE.  Bit positions are zero based.
+ */
+
+extern bool gb_test(struct gb_t_map *map, u32 bitn);
+
+#endif /*GB_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/getsection.h b/drivers/staging/tidspbridge/include/dspbridge/getsection.h
new file mode 100644
index 00000000000..626063dd9df
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/getsection.h
@@ -0,0 +1,108 @@
+/*
+ * getsection.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file provides an API add-on to the dynamic loader that allows the user
+ * to query section information and extract section data from dynamic load
+ * modules.
+ *
+ * Notes:
+ *   Functions in this API assume that the supplied dynamic_loader_stream
+ *   object supports the set_file_posn method.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _GETSECTION_H_
+#define _GETSECTION_H_
+
+#include "dynamic_loader.h"
+
+/*
+ * Procedure dload_module_open
+ *
+ * Parameters:
+ *  module  The input stream that supplies the module image
+ *  syms    Host-side malloc/free and error reporting functions.
+ *          Other methods are unused.
+ *
+ * Effect:
+ *  Reads header information from a dynamic loader module using the specified
+ * stream object, and returns a handle for the module information.  This
+ * handle may be used in subsequent query calls to obtain information
+ * contained in the module.
+ *
+ * Returns:
+ *  NULL if an error is encountered, otherwise a module handle for use
+ * in subsequent operations.
+ */
+extern void *dload_module_open(struct dynamic_loader_stream
+					   *module, struct dynamic_loader_sym
+					   *syms);
+
+/*
+ * Procedure dload_get_section_info
+ *
+ * Parameters:
+ *  minfo       Handle from dload_module_open for this module
+ *  section_name Pointer to the string name of the section desired
+ *  section_info Address of a section info structure pointer to be initialized
+ *
+ * Effect:
+ *  Finds the specified section in the module information, and fills in
+ * the provided ldr_section_info structure.
+ *
+ * Returns:
+ *  TRUE for success, FALSE for section not found
+ */
+extern int dload_get_section_info(void *minfo,
+				  const char *section_name,
+				  const struct ldr_section_info
+				  **const section_info);
+
+/*
+ * Procedure dload_get_section
+ *
+ * Parameters:
+ *  minfo       Handle from dload_module_open for this module
+ *  section_info Pointer to a section info structure for the desired section
+ *  section_data Buffer to contain the section initialized data
+ *
+ * Effect:
+ *  Copies the initialized data for the specified section into the
+ * supplied buffer.
+ *
+ * Returns:
+ *  TRUE for success, FALSE for section not found
+ */
+extern int dload_get_section(void *minfo,
+			     const struct ldr_section_info *section_info,
+			     void *section_data);
+
+/*
+ * Procedure dload_module_close
+ *
+ * Parameters:
+ *  minfo       Handle from dload_module_open for this module
+ *
+ * Effect:
+ *  Releases any storage associated with the module handle.  On return,
+ * the module handle is invalid.
+ *
+ * Returns:
+ *  Zero for success. On error, the number of errors detected is returned.
+ * Individual errors are reported using syms->error_report(), where syms was
+ * an argument to dload_module_open
+ */
+extern void dload_module_close(void *minfo);
+
+#endif /* _GETSECTION_H_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/gh.h b/drivers/staging/tidspbridge/include/dspbridge/gh.h
new file mode 100644
index 00000000000..9de291d1f56
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/gh.h
@@ -0,0 +1,34 @@
+/*
+ * gh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef GH_
+#define GH_
+#include <dspbridge/host_os.h>
+
+extern struct gh_t_hash_tab *gh_create(u16 max_bucket, u16 val_size,
+				       u16(*hash) (void *, u16),
+				       bool(*match) (void *, void *),
+				       void (*delete) (void *));
+extern void gh_delete(struct gh_t_hash_tab *hash_tab);
+extern void gh_exit(void);
+extern void *gh_find(struct gh_t_hash_tab *hash_tab, void *key);
+extern void gh_init(void);
+extern void *gh_insert(struct gh_t_hash_tab *hash_tab, void *key, void *value);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+void gh_iterate(struct gh_t_hash_tab *hash_tab,
+	void (*callback)(void *, void *), void *user_data);
+#endif
+#endif /* GH_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/gs.h b/drivers/staging/tidspbridge/include/dspbridge/gs.h
new file mode 100644
index 00000000000..f32d8d9af41
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/gs.h
@@ -0,0 +1,59 @@
+/*
+ * gs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Memory allocation/release wrappers.  This module allows clients to
+ * avoid OS spacific issues related to memory allocation.  It also provides
+ * simple diagnostic capabilities to assist in the detection of memory
+ * leaks.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef GS_
+#define GS_
+
+/*
+ *  ======== gs_alloc ========
+ *  Alloc size bytes of space.  Returns pointer to space
+ *  allocated, otherwise NULL.
+ */
+extern void *gs_alloc(u32 size);
+
+/*
+ *  ======== gs_exit ========
+ *  Module exit.  Do not change to "#define gs_init()"; in
+ *  some environments this operation must actually do some work!
+ */
+extern void gs_exit(void);
+
+/*
+ *  ======== gs_free ========
+ *  Free space allocated by gs_alloc() or GS_calloc().
+ */
+extern void gs_free(void *ptr);
+
+/*
+ *  ======== gs_frees ========
+ *  Free space allocated by gs_alloc() or GS_calloc() and assert that
+ *  the size of the allocation is size bytes.
+ */
+extern void gs_frees(void *ptr, u32 size);
+
+/*
+ *  ======== gs_init ========
+ *  Module initialization.  Do not change to "#define gs_init()"; in
+ *  some environments this operation must actually do some work!
+ */
+extern void gs_init(void);
+
+#endif /*GS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/host_os.h b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
new file mode 100644
index 00000000000..6b4feb4d015
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/host_os.h
@@ -0,0 +1,88 @@
+/*
+ * host_os.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HOST_OS_H_
+#define _HOST_OS_H_
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/syscalls.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/vmalloc.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <plat/clock.h>
+#include <linux/clk.h>
+#include <plat/mailbox.h>
+#include <linux/pagemap.h>
+#include <asm/cacheflush.h>
+#include <linux/dma-mapping.h>
+
+/* TODO -- Remove, once BP defines them */
+#define INT_DSP_MMU_IRQ        28
+
+struct dspbridge_platform_data {
+	void (*dsp_set_min_opp) (u8 opp_id);
+	 u8(*dsp_get_opp) (void);
+	void (*cpu_set_freq) (unsigned long f);
+	unsigned long (*cpu_get_freq) (void);
+	unsigned long mpu_speed[6];
+
+	/* functions to write and read PRCM registers */
+	void (*dsp_prm_write)(u32, s16 , u16);
+	u32 (*dsp_prm_read)(s16 , u16);
+	u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+	void (*dsp_cm_write)(u32, s16 , u16);
+	u32 (*dsp_cm_read)(s16 , u16);
+	u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+	u32 phys_mempool_base;
+	u32 phys_mempool_size;
+};
+
+#define PRCM_VDD1 1
+
+extern struct platform_device *omap_dspbridge_dev;
+extern struct device *bridge;
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void dspbridge_reserve_sdram(void);
+#else
+static inline void dspbridge_reserve_sdram(void)
+{
+}
+#endif
+
+extern unsigned long dspbridge_get_mempool_base(void);
+#endif
diff --git a/drivers/staging/tidspbridge/include/dspbridge/io.h b/drivers/staging/tidspbridge/include/dspbridge/io.h
new file mode 100644
index 00000000000..bc346f9a01c
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/io.h
@@ -0,0 +1,114 @@
+/*
+ * io.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The io module manages IO between CHNL and msg_ctrl.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef IO_
+#define IO_
+
+#include <dspbridge/cfgdefs.h>
+#include <dspbridge/devdefs.h>
+
+#include <dspbridge/iodefs.h>
+
+/*
+ *  ======== io_create ========
+ *  Purpose:
+ *      Create an IO manager object, responsible for managing IO between
+ *      CHNL and msg_ctrl.
+ *  Parameters:
+ *      channel_mgr:            Location to store a channel manager object on
+ *                              output.
+ *      hdev_obj:             Handle to a device object.
+ *      mgr_attrts:              IO manager attributes.
+ *      mgr_attrts->birq:        I/O IRQ number.
+ *      mgr_attrts->irq_shared:     TRUE if the IRQ is shareable.
+ *      mgr_attrts->word_size:   DSP Word size in equivalent PC bytes..
+ *  Returns:
+ *      0:                Success;
+ *      -ENOMEM:            Insufficient memory for requested resources.
+ *      -EIO:             Unable to plug channel ISR for configured IRQ.
+ *      -EINVAL: Invalid DSP word size (must be > 0).
+ *               Invalid base address for DSP communications.
+ *  Requires:
+ *      io_init(void) called.
+ *      io_man != NULL.
+ *      mgr_attrts != NULL.
+ *  Ensures:
+ */
+extern int io_create(struct io_mgr **io_man,
+			    struct dev_object *hdev_obj,
+			    const struct io_attrs *mgr_attrts);
+
+/*
+ *  ======== io_destroy ========
+ *  Purpose:
+ *      Destroy the IO manager.
+ *  Parameters:
+ *      hio_mgr:         IOmanager object.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    hio_mgr was invalid.
+ *  Requires:
+ *      io_init(void) called.
+ *  Ensures:
+ */
+extern int io_destroy(struct io_mgr *hio_mgr);
+
+/*
+ *  ======== io_exit ========
+ *  Purpose:
+ *      Discontinue usage of the IO module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      io_init(void) previously called.
+ *  Ensures:
+ *      Resources, if any acquired in io_init(void), are freed when the last
+ *      client of IO calls io_exit(void).
+ */
+extern void io_exit(void);
+
+/*
+ *  ======== io_init ========
+ *  Purpose:
+ *      Initialize the IO module's private state.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occurred.
+ *  Requires:
+ *  Ensures:
+ *      A requirement for each of the other public CHNL functions.
+ */
+extern bool io_init(void);
+
+/*
+ *  ======== io_on_loaded ========
+ *  Purpose:
+ *      Called when a program is loaded so IO manager can update its
+ *      internal state.
+ *  Parameters:
+ *      hio_mgr:         IOmanager object.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    hio_mgr was invalid.
+ *  Requires:
+ *      io_init(void) called.
+ *  Ensures:
+ */
+extern int io_on_loaded(struct io_mgr *hio_mgr);
+
+#endif /* CHNL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/io_sm.h b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h
new file mode 100644
index 00000000000..18aec55d864
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/io_sm.h
@@ -0,0 +1,298 @@
+/*
+ * io_sm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * IO dispatcher for a shared memory channel driver.
+ * Also, includes macros to simulate shm via port io calls.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef IOSM_
+#define IOSM_
+
+#include <dspbridge/_chnl_sm.h>
+#include <dspbridge/host_os.h>
+
+#include <dspbridge/iodefs.h>
+
+#define IO_INPUT            0
+#define IO_OUTPUT           1
+#define IO_SERVICE          2
+#define IO_MAXSERVICE       IO_SERVICE
+
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+/* The maximum number of OPPs that are supported */
+extern s32 dsp_max_opps;
+/* The Vdd1 opp table information */
+extern u32 vdd1_dsp_freq[6][4];
+#endif
+
+/*
+ *  ======== io_cancel_chnl ========
+ *  Purpose:
+ *      Cancel IO on a given channel.
+ *  Parameters:
+ *      hio_mgr:     IO Manager.
+ *      chnl:       Index of channel to cancel IO on.
+ *  Returns:
+ *  Requires:
+ *      Valid hio_mgr.
+ *  Ensures:
+ */
+extern void io_cancel_chnl(struct io_mgr *hio_mgr, u32 chnl);
+
+/*
+ *  ======== io_dpc ========
+ *  Purpose:
+ *      Deferred procedure call for shared memory channel driver ISR.  Carries
+ *      out the dispatch of I/O.
+ *  Parameters:
+ *      ref_data:   Pointer to reference data registered via a call to
+ *                  DPC_Create().
+ *  Returns:
+ *  Requires:
+ *      Must not block.
+ *      Must not acquire resources.
+ *      All data touched must be locked in memory if running in kernel mode.
+ *  Ensures:
+ *      Non-preemptible (but interruptible).
+ */
+extern void io_dpc(unsigned long ref_data);
+
+/*
+ *  ======== io_mbox_msg ========
+ *  Purpose:
+ *      Main interrupt handler for the shared memory Bridge channel manager.
+ *      Calls the Bridge's chnlsm_isr to determine if this interrupt is ours,
+ *      then schedules a DPC to dispatch I/O.
+ *  Parameters:
+ *      ref_data:   Pointer to the channel manager object for this board.
+ *                  Set in an initial call to ISR_Install().
+ *  Returns:
+ *      TRUE if interrupt handled; FALSE otherwise.
+ *  Requires:
+ *      Must be in locked memory if executing in kernel mode.
+ *      Must only call functions which are in locked memory if Kernel mode.
+ *      Must only call asynchronous services.
+ *      Interrupts are disabled and EOI for this interrupt has been sent.
+ *  Ensures:
+ */
+void io_mbox_msg(u32 msg);
+
+/*
+ *  ======== io_request_chnl ========
+ *  Purpose:
+ *      Request I/O from the DSP. Sets flags in shared memory, then interrupts
+ *      the DSP.
+ *  Parameters:
+ *      hio_mgr:     IO manager handle.
+ *      pchnl:      Ptr to the channel requesting I/O.
+ *      io_mode:      Mode of channel: {IO_INPUT | IO_OUTPUT}.
+ *  Returns:
+ *  Requires:
+ *      pchnl != NULL
+ *  Ensures:
+ */
+extern void io_request_chnl(struct io_mgr *io_manager,
+			    struct chnl_object *pchnl,
+			    u8 io_mode, u16 *mbx_val);
+
+/*
+ *  ======== iosm_schedule ========
+ *  Purpose:
+ *      Schedule DPC for IO.
+ *  Parameters:
+ *      pio_mgr:     Ptr to a I/O manager.
+ *  Returns:
+ *  Requires:
+ *      pchnl != NULL
+ *  Ensures:
+ */
+extern void iosm_schedule(struct io_mgr *io_manager);
+
+/*
+ * DSP-DMA IO functions
+ */
+
+/*
+ *  ======== io_ddma_init_chnl_desc ========
+ *  Purpose:
+ *      Initialize DSP DMA channel descriptor.
+ *  Parameters:
+ *      hio_mgr:         Handle to a I/O manager.
+ *      ddma_chnl_id:    DDMA channel identifier.
+ *      num_desc:       Number of buffer descriptors(equals # of IOReqs &
+ *                      Chirps)
+ *      dsp:           Dsp address;
+ *  Returns:
+ *  Requires:
+ *     ddma_chnl_id < DDMA_MAXDDMACHNLS
+ *     num_desc > 0
+ *     pVa != NULL
+ *     pDspPa != NULL
+ *
+ *  Ensures:
+ */
+extern void io_ddma_init_chnl_desc(struct io_mgr *hio_mgr, u32 ddma_chnl_id,
+				   u32 num_desc, void *dsp);
+
+/*
+ *  ======== io_ddma_clear_chnl_desc ========
+ *  Purpose:
+ *      Clear DSP DMA channel descriptor.
+ *  Parameters:
+ *      hio_mgr:         Handle to a I/O manager.
+ *      ddma_chnl_id:    DDMA channel identifier.
+ *  Returns:
+ *  Requires:
+ *     ddma_chnl_id < DDMA_MAXDDMACHNLS
+ *  Ensures:
+ */
+extern void io_ddma_clear_chnl_desc(struct io_mgr *hio_mgr, u32 ddma_chnl_id);
+
+/*
+ *  ======== io_ddma_request_chnl ========
+ *  Purpose:
+ *      Request channel DSP-DMA from the DSP. Sets up SM descriptors and
+ *      control fields in shared memory.
+ *  Parameters:
+ *      hio_mgr:     Handle to a I/O manager.
+ *      pchnl:      Ptr to channel object
+ *      chnl_packet_obj:     Ptr to channel i/o request packet.
+ *  Returns:
+ *  Requires:
+ *      pchnl != NULL
+ *      pchnl->cio_reqs > 0
+ *      chnl_packet_obj != NULL
+ *  Ensures:
+ */
+extern void io_ddma_request_chnl(struct io_mgr *hio_mgr,
+				 struct chnl_object *pchnl,
+				 struct chnl_irp *chnl_packet_obj,
+				 u16 *mbx_val);
+
+/*
+ * Zero-copy IO functions
+ */
+
+/*
+ *  ======== io_ddzc_init_chnl_desc ========
+ *  Purpose:
+ *      Initialize ZCPY channel descriptor.
+ *  Parameters:
+ *      hio_mgr:     Handle to a I/O manager.
+ *      zid:        zero-copy channel identifier.
+ *  Returns:
+ *  Requires:
+ *     ddma_chnl_id < DDMA_MAXZCPYCHNLS
+ *     hio_mgr != Null
+ *  Ensures:
+ */
+extern void io_ddzc_init_chnl_desc(struct io_mgr *hio_mgr, u32 zid);
+
+/*
+ *  ======== io_ddzc_clear_chnl_desc ========
+ *  Purpose:
+ *      Clear DSP ZC channel descriptor.
+ *  Parameters:
+ *      hio_mgr:         Handle to a I/O manager.
+ *      ch_id:        ZC channel identifier.
+ *  Returns:
+ *  Requires:
+ *      hio_mgr is valid
+ *      ch_id < DDMA_MAXZCPYCHNLS
+ *  Ensures:
+ */
+extern void io_ddzc_clear_chnl_desc(struct io_mgr *hio_mgr, u32 ch_id);
+
+/*
+ *  ======== io_ddzc_request_chnl ========
+ *  Purpose:
+ *      Request zero-copy channel transfer. Sets up SM descriptors and
+ *      control fields in shared memory.
+ *  Parameters:
+ *      hio_mgr:         Handle to a I/O manager.
+ *      pchnl:          Ptr to channel object
+ *      chnl_packet_obj:         Ptr to channel i/o request packet.
+ *  Returns:
+ *  Requires:
+ *      pchnl != NULL
+ *      pchnl->cio_reqs > 0
+ *      chnl_packet_obj != NULL
+ *  Ensures:
+ */
+extern void io_ddzc_request_chnl(struct io_mgr *hio_mgr,
+				 struct chnl_object *pchnl,
+				 struct chnl_irp *chnl_packet_obj,
+				 u16 *mbx_val);
+
+/*
+ *  ======== io_sh_msetting ========
+ *  Purpose:
+ *      Sets the shared memory setting
+ *  Parameters:
+ *      hio_mgr:         Handle to a I/O manager.
+ *      desc:             Shared memory type
+ *      pargs:          Ptr to shm setting
+ *  Returns:
+ *  Requires:
+ *      hio_mgr != NULL
+ *      pargs != NULL
+ *  Ensures:
+ */
+extern int io_sh_msetting(struct io_mgr *hio_mgr, u8 desc, void *pargs);
+
+/*
+ *  Misc functions for the CHNL_IO shared memory library:
+ */
+
+/* Maximum channel bufsize that can be used. */
+extern u32 io_buf_size(struct io_mgr *hio_mgr);
+
+extern u32 io_read_value(struct bridge_dev_context *dev_ctxt, u32 dsp_addr);
+
+extern void io_write_value(struct bridge_dev_context *dev_ctxt,
+			   u32 dsp_addr, u32 value);
+
+extern u32 io_read_value_long(struct bridge_dev_context *dev_ctxt,
+			      u32 dsp_addr);
+
+extern void io_write_value_long(struct bridge_dev_context *dev_ctxt,
+				u32 dsp_addr, u32 value);
+
+extern void io_or_set_value(struct bridge_dev_context *dev_ctxt,
+			    u32 dsp_addr, u32 value);
+
+extern void io_and_set_value(struct bridge_dev_context *dev_ctxt,
+			     u32 dsp_addr, u32 value);
+
+extern void io_sm_init(void);
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/*
+ *  ========print_dsp_trace_buffer ========
+ *      Print DSP tracebuffer.
+ */
+extern int print_dsp_trace_buffer(struct bridge_dev_context
+					 *hbridge_context);
+
+int dump_dsp_stack(struct bridge_dev_context *bridge_context);
+
+void dump_dl_modules(struct bridge_dev_context *bridge_context);
+
+#endif
+#if defined(CONFIG_TIDSPBRIDGE_BACKTRACE) || defined(CONFIG_TIDSPBRIDGE_DEBUG)
+void print_dsp_debug_trace(struct io_mgr *hio_mgr);
+#endif
+
+#endif /* IOSM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/iodefs.h b/drivers/staging/tidspbridge/include/dspbridge/iodefs.h
new file mode 100644
index 00000000000..8bd10a04200
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/iodefs.h
@@ -0,0 +1,36 @@
+/*
+ * iodefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * System-wide channel objects and constants.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef IODEFS_
+#define IODEFS_
+
+#define IO_MAXIRQ   0xff	/* Arbitrarily large number. */
+
+/* IO Objects: */
+struct io_mgr;
+
+/* IO manager attributes: */
+struct io_attrs {
+	u8 birq;		/* Channel's I/O IRQ number. */
+	bool irq_shared;	/* TRUE if the IRQ is shareable. */
+	u32 word_size;		/* DSP Word size. */
+	u32 shm_base;		/* Physical base address of shared memory. */
+	u32 usm_length;		/* Size (in bytes) of shared memory. */
+};
+
+#endif /* IODEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/ldr.h b/drivers/staging/tidspbridge/include/dspbridge/ldr.h
new file mode 100644
index 00000000000..6a0269cd07e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/ldr.h
@@ -0,0 +1,29 @@
+/*
+ * ldr.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Provide module loading services and symbol export services.
+ *
+ * Notes:
+ *   This service is meant to be used by modules of the DSP/BIOS Bridge
+ *   driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef LDR_
+#define LDR_
+
+/* Loader objects: */
+struct ldr_module;
+
+#endif /* LDR_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/list.h b/drivers/staging/tidspbridge/include/dspbridge/list.h
new file mode 100644
index 00000000000..6837b614073
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/list.h
@@ -0,0 +1,225 @@
+/*
+ * list.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Declarations of list management control structures and definitions
+ * of inline list management functions.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef LIST_
+#define LIST_
+
+#include <dspbridge/host_os.h>
+#include <linux/list.h>
+
+#define LST_IS_EMPTY(l)      list_empty(&(l)->head)
+
+struct lst_list {
+	struct list_head head;
+};
+
+/*
+ *  ======== lst_first ========
+ *  Purpose:
+ *      Returns a pointer to the first element of the list, or NULL if the list
+ *      is empty.
+ *  Parameters:
+ *      lst:  Pointer to list control structure.
+ *  Returns:
+ *      Pointer to first list element, or NULL.
+ *  Requires:
+ *      - LST initialized.
+ *      - lst != NULL.
+ *  Ensures:
+ */
+static inline struct list_head *lst_first(struct lst_list *lst)
+{
+	if (lst && !list_empty(&lst->head))
+		return lst->head.next;
+	return NULL;
+}
+
+/*
+ *  ======== lst_get_head ========
+ *  Purpose:
+ *      Pops the head off the list and returns a pointer to it.
+ *  Details:
+ *      If the list is empty, returns NULL.
+ *      Else, removes the element at the head of the list, making the next
+ *      element the head of the list.
+ *      The head is removed by making the tail element of the list point its
+ *      "next" pointer at the next element after the head, and by making the
+ *      "prev" pointer of the next element after the head point at the tail
+ *      element.  So the next element after the head becomes the new head of
+ *      the list.
+ *  Parameters:
+ *      lst:    Pointer to list control structure of list whose head
+ *              element is to be removed
+ *  Returns:
+ *      Pointer to element that was at the head of the list (success)
+ *      NULL          No elements in list
+ *  Requires:
+ *      - LST initialized.
+ *      - lst != NULL.
+ *  Ensures:
+ *  Notes:
+ *      Because the tail of the list points forward (its "next" pointer) to
+ *      the head of the list, and the head of the list points backward (its
+ *      "prev" pointer) to the tail of the list, this list is circular.
+ */
+static inline struct list_head *lst_get_head(struct lst_list *lst)
+{
+	struct list_head *elem_list;
+
+	if (!lst || list_empty(&lst->head))
+		return NULL;
+
+	elem_list = lst->head.next;
+	lst->head.next = elem_list->next;
+	elem_list->next->prev = &lst->head;
+
+	return elem_list;
+}
+
+/*
+ *  ======== lst_init_elem ========
+ *  Purpose:
+ *      Initializes a list element to default (cleared) values
+ *  Details:
+ *  Parameters:
+ *      elem_list:  Pointer to list element to be reset
+ *  Returns:
+ *  Requires:
+ *      LST initialized.
+ *  Ensures:
+ *  Notes:
+ *      This function must not be called to "reset" an element in the middle
+ *      of a list chain -- that would break the chain.
+ *
+ */
+static inline void lst_init_elem(struct list_head *elem_list)
+{
+	if (elem_list) {
+		elem_list->next = NULL;
+		elem_list->prev = NULL;
+	}
+}
+
+/*
+ *  ======== lst_insert_before ========
+ *  Purpose:
+ *     Insert the element before the existing element.
+ *  Parameters:
+ *      lst:            Pointer to list control structure.
+ *      elem_list:          Pointer to element in list to insert.
+ *      elem_existing:  Pointer to existing list element.
+ *  Returns:
+ *  Requires:
+ *      - LST initialized.
+ *      - lst != NULL.
+ *      - elem_list != NULL.
+ *      - elem_existing != NULL.
+ *  Ensures:
+ */
+static inline void lst_insert_before(struct lst_list *lst,
+				     struct list_head *elem_list,
+				     struct list_head *elem_existing)
+{
+	if (lst && elem_list && elem_existing)
+		list_add_tail(elem_list, elem_existing);
+}
+
+/*
+ *  ======== lst_next ========
+ *  Purpose:
+ *      Returns a pointer to the next element of the list, or NULL if the next
+ *      element is the head of the list or the list is empty.
+ *  Parameters:
+ *      lst:        Pointer to list control structure.
+ *      cur_elem:   Pointer to element in list to remove.
+ *  Returns:
+ *      Pointer to list element, or NULL.
+ *  Requires:
+ *      - LST initialized.
+ *      - lst != NULL.
+ *      - cur_elem != NULL.
+ *  Ensures:
+ */
+static inline struct list_head *lst_next(struct lst_list *lst,
+					 struct list_head *cur_elem)
+{
+	if (lst && !list_empty(&lst->head) && cur_elem &&
+	    (cur_elem->next != &lst->head))
+		return cur_elem->next;
+	return NULL;
+}
+
+/*
+ *  ======== lst_put_tail ========
+ *  Purpose:
+ *      Adds the specified element to the tail of the list
+ *  Details:
+ *      Sets new element's "prev" pointer to the address previously held by
+ *      the head element's prev pointer.  This is the previous tail member of
+ *      the list.
+ *      Sets the new head's prev pointer to the address of the element.
+ *      Sets next pointer of the previous tail member of the list to point to
+ *      the new element (rather than the head, which it had been pointing at).
+ *      Sets new element's next pointer to the address of the head element.
+ *      Sets head's prev pointer to the address of the new element.
+ *  Parameters:
+ *      lst:    Pointer to list control structure to which *elem_list will be
+ *              added
+ *      elem_list:  Pointer to list element to be added
+ *  Returns:
+ *      Void
+ *  Requires:
+ *      *elem_list and *lst must both exist.
+ *      LST initialized.
+ *  Ensures:
+ *  Notes:
+ *      Because the tail is always "just before" the head of the list (the
+ *      tail's "next" pointer points at the head of the list, and the head's
+ *      "prev" pointer points at the tail of the list), the list is circular.
+ */
+static inline void lst_put_tail(struct lst_list *lst,
+				struct list_head *elem_list)
+{
+	if (lst && elem_list)
+		list_add_tail(elem_list, &lst->head);
+}
+
+/*
+ *  ======== lst_remove_elem ========
+ *  Purpose:
+ *      Removes (unlinks) the given element from the list, if the list is not
+ *      empty.  Does not free the list element.
+ *  Parameters:
+ *      lst:        Pointer to list control structure.
+ *      cur_elem:   Pointer to element in list to remove.
+ *  Returns:
+ *  Requires:
+ *      - LST initialized.
+ *      - lst != NULL.
+ *      - cur_elem != NULL.
+ *  Ensures:
+ */
+static inline void lst_remove_elem(struct lst_list *lst,
+				   struct list_head *cur_elem)
+{
+	if (lst && !list_empty(&lst->head) && cur_elem)
+		list_del_init(cur_elem);
+}
+
+#endif /* LIST_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mbx_sh.h b/drivers/staging/tidspbridge/include/dspbridge/mbx_sh.h
new file mode 100644
index 00000000000..5d165cd932f
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/mbx_sh.h
@@ -0,0 +1,184 @@
+/*
+ * mbx_sh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Definitions for shared mailbox cmd/data values.(used on both
+ * the GPP and DSP sides).
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ *  Bridge usage of OMAP mailbox 1 is determined by the "class" of the
+ *  mailbox interrupt's cmd value received. The class value are defined
+ *  as a bit (10 thru 15) being set.
+ *
+ *  Note: Only 16 bits of each  is used. Other 16 bit data reg available.
+ *
+ *   16 bit Mbx bit defns:
+ *
+ * A). Exception/Error handling (Module DEH) : class = 0.
+ *
+ *    15         10                  0
+ *   ---------------------------------
+ *   |0|0|0|0|0|0|x|x|x|x|x|x|x|x|x|x|
+ *   ---------------------------------
+ *   |  (class)  | (module specific) |
+ *
+ *
+ * B: DSP-DMA link driver channels (DDMA) : class = 1.
+ *
+ *    15         10                  0
+ *   ---------------------------------
+ *   |0|0|0|0|0|1|b|b|b|b|b|c|c|c|c|c|
+ *   ---------------------------------
+ *   |  (class)  | (module specific) |
+ *
+ *   where b -> buffer index  (32 DDMA buffers/chnl max)
+ *         c -> channel Id    (32 DDMA chnls max)
+ *
+ *
+ * C: Proc-copy link driver channels (PCPY) : class = 2.
+ *
+ *    15         10                  0
+ *   ---------------------------------
+ *   |0|0|0|0|1|0|x|x|x|x|x|x|x|x|x|x|
+ *   ---------------------------------
+ *   |  (class)  | (module specific) |
+ *
+ *
+ * D: Zero-copy link driver channels (DDZC) : class = 4.
+ *
+ *    15         10                  0
+ *   ---------------------------------
+ *   |0|0|0|1|0|0|x|x|x|x|x|c|c|c|c|c|
+ *   ---------------------------------
+ *   |  (class)  | (module specific) |
+ *
+ *   where x -> not used
+ *         c -> channel Id    (32 ZCPY chnls max)
+ *
+ *
+ * E: Power management : class = 8.
+ *
+ *    15         10                  0
+ *   ---------------------------------
+ *   |0|0|1|0|0|0|x|x|x|x|x|c|c|c|c|c|
+
+ * 	0010 00xx xxxc cccc
+ *	0010 00nn pppp qqqq
+ *	nn:
+ *	00 = reserved
+ *	01 = pwr state change
+ *	10 = opp pre-change
+ *	11 = opp post-change
+ *
+ *	if nn = pwr state change:
+ *	pppp = don't care
+ *	qqqq:
+ *	0010 = hibernate
+ *	0010 0001 0000 0010
+ *	0110 = retention
+ *	0010 0001 0000 0110
+ *	others reserved
+ *
+ *	if nn = opp pre-change:
+ *	pppp = current opp
+ *	qqqq = next opp
+ *
+ *	if nn = opp post-change:
+ *	pppp = prev opp
+ *	qqqq = current opp
+ *
+ *   ---------------------------------
+ *   |  (class)  | (module specific) |
+ *
+ *   where x -> not used
+ *         c -> Power management command
+ *
+ */
+
+#ifndef _MBX_SH_H
+#define _MBX_SH_H
+
+#define MBX_CLASS_MSK      0xFC00	/* Class bits are 10 thru 15 */
+#define MBX_VALUE_MSK      0x03FF	/* Value is 0 thru 9 */
+
+#define MBX_DEH_CLASS      0x0000	/* DEH owns Mbx INTR */
+#define MBX_DDMA_CLASS     0x0400	/* DSP-DMA link drvr chnls owns INTR */
+#define MBX_PCPY_CLASS     0x0800	/* PROC-COPY  " */
+#define MBX_ZCPY_CLASS     0x1000	/* ZERO-COPY  " */
+#define MBX_PM_CLASS       0x2000	/* Power Management */
+#define MBX_DBG_CLASS      0x4000	/* For debugging purpose */
+
+/*
+ * Exception Handler codes
+ * Magic code used to determine if DSP signaled exception.
+ */
+#define MBX_DEH_BASE        0x0
+#define MBX_DEH_USERS_BASE  0x100	/* 256 */
+#define MBX_DEH_LIMIT       0x3FF	/* 1023 */
+#define MBX_DEH_RESET       0x101	/* DSP RESET (DEH) */
+#define MBX_DEH_EMMU        0X103	/*DSP MMU FAULT RECOVERY */
+
+/*
+ *  Link driver command/status codes.
+ */
+/* DSP-DMA */
+#define MBX_DDMA_NUMCHNLBITS 5	/* # chnl Id: # bits available */
+#define MBX_DDMA_CHNLSHIFT   0	/* # of bits to shift */
+#define MBX_DDMA_CHNLMSK     0x01F	/* bits 0 thru 4 */
+
+#define MBX_DDMA_NUMBUFBITS  5	/* buffer index: # of bits avail */
+#define MBX_DDMA_BUFSHIFT    (MBX_DDMA_NUMCHNLBITS + MBX_DDMA_CHNLSHIFT)
+#define MBX_DDMA_BUFMSK      0x3E0	/* bits 5 thru 9 */
+
+/* Zero-Copy */
+#define MBX_ZCPY_NUMCHNLBITS 5	/* # chnl Id: # bits available */
+#define MBX_ZCPY_CHNLSHIFT   0	/* # of bits to shift */
+#define MBX_ZCPY_CHNLMSK     0x01F	/* bits 0 thru 4 */
+
+/*  Power Management Commands */
+#define MBX_PM_DSPIDLE                  (MBX_PM_CLASS + 0x0)
+#define MBX_PM_DSPWAKEUP                (MBX_PM_CLASS + 0x1)
+#define MBX_PM_EMERGENCYSLEEP           (MBX_PM_CLASS + 0x2)
+#define MBX_PM_SLEEPUNTILRESTART        (MBX_PM_CLASS + 0x3)
+#define MBX_PM_DSPGLOBALIDLE_OFF        (MBX_PM_CLASS + 0x4)
+#define MBX_PM_DSPGLOBALIDLE_ON         (MBX_PM_CLASS + 0x5)
+#define MBX_PM_SETPOINT_PRENOTIFY       (MBX_PM_CLASS + 0x6)
+#define MBX_PM_SETPOINT_POSTNOTIFY      (MBX_PM_CLASS + 0x7)
+#define MBX_PM_DSPRETN                  (MBX_PM_CLASS + 0x8)
+#define MBX_PM_DSPRETENTION        (MBX_PM_CLASS + 0x8)
+#define MBX_PM_DSPHIBERNATE        (MBX_PM_CLASS + 0x9)
+#define MBX_PM_HIBERNATE_EN        (MBX_PM_CLASS + 0xA)
+#define MBX_PM_OPP_REQ                  (MBX_PM_CLASS + 0xB)
+#define MBX_PM_OPP_CHG                  (MBX_PM_CLASS + 0xC)
+
+#define MBX_PM_TYPE_MASK 0x0300
+#define MBX_PM_TYPE_PWR_CHNG 0x0100
+#define MBX_PM_TYPE_OPP_PRECHNG 0x0200
+#define MBX_PM_TYPE_OPP_POSTCHNG 0x0300
+#define MBX_PM_TYPE_OPP_MASK 0x0300
+#define MBX_PM_OPP_PRECHNG (MBX_PM_CLASS | MBX_PM_TYPE_OPP_PRECHNG)
+/* DSP to MPU */
+#define MBX_PM_OPP_CHNG(OPP) (MBX_PM_CLASS | MBX_PM_TYPE_OPP_PRECHNG | (OPP))
+#define MBX_PM_RET (MBX_PM_CLASS | MBX_PM_TYPE_PWR_CHNG | 0x0006)
+#define MBX_PM_HIB (MBX_PM_CLASS | MBX_PM_TYPE_PWR_CHNG | 0x0002)
+#define MBX_PM_OPP1 0
+#define MBX_PM_OPP2 1
+#define MBX_PM_OPP3 2
+#define MBX_PM_OPP4 3
+
+/* Bridge Debug Commands */
+#define MBX_DBG_SYSPRINTF       (MBX_DBG_CLASS + 0x0)
+
+#endif /* _MBX_SH_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/memdefs.h b/drivers/staging/tidspbridge/include/dspbridge/memdefs.h
new file mode 100644
index 00000000000..78d2c5d0045
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/memdefs.h
@@ -0,0 +1,30 @@
+/*
+ * memdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global MEM constants and types, shared between Bridge driver and DSP API.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MEMDEFS_
+#define MEMDEFS_
+
+/*
+ *  MEM_VIRTUALSEGID is used by Node & Strm to access virtual address space in
+ *  the correct client process context.
+ */
+#define MEM_SETVIRTUALSEGID     0x10000000
+#define MEM_GETVIRTUALSEGID     0x20000000
+#define MEM_MASKVIRTUALSEGID    (MEM_SETVIRTUALSEGID | MEM_GETVIRTUALSEGID)
+
+#endif /* MEMDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mgr.h b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
new file mode 100644
index 00000000000..99f7dc0116b
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
@@ -0,0 +1,205 @@
+/*
+ * mgr.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This is the DSP API RM module interface.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MGR_
+#define MGR_
+
+#include <dspbridge/mgrpriv.h>
+
+#define MAX_EVENTS 32
+
+/*
+ *  ======== mgr_wait_for_bridge_events ========
+ *  Purpose:
+ *      Block on any Bridge event(s)
+ *  Parameters:
+ *      anotifications  : array of pointers to notification objects.
+ *      count          : number of elements in above array
+ *      pu_index         : index of signaled event object
+ *      utimeout        : timeout interval in milliseocnds
+ *  Returns:
+ *      0         : Success.
+ *      -ETIME    : Wait timed out. *pu_index is undetermined.
+ *  Details:
+ */
+
+int mgr_wait_for_bridge_events(struct dsp_notification
+				      **anotifications,
+				      u32 count, u32 *pu_index,
+				      u32 utimeout);
+
+/*
+ *  ======== mgr_create ========
+ *  Purpose:
+ *      Creates the Manager Object. This is done during the driver loading.
+ *      There is only one Manager Object in the DSP/BIOS Bridge.
+ *  Parameters:
+ *      mgr_obj:        Location to store created MGR Object handle.
+ *      dev_node_obj:       Device object as known to the system.
+ *  Returns:
+ *      0:        Success
+ *      -ENOMEM:    Failed to Create the Object
+ *      -EPERM:      General Failure
+ *  Requires:
+ *      MGR Initialized (refs > 0 )
+ *      mgr_obj != NULL.
+ *  Ensures:
+ *      0:        *mgr_obj is a valid MGR interface to the device.
+ *                      MGR Object stores the DCD Manager Handle.
+ *                      MGR Object stored in the Regsitry.
+ *      !0:       MGR Object not created
+ *  Details:
+ *      DCD Dll is loaded and MGR Object stores the handle of the DLL.
+ */
+extern int mgr_create(struct mgr_object **mgr_obj,
+			     struct cfg_devnode *dev_node_obj);
+
+/*
+ *  ======== mgr_destroy ========
+ *  Purpose:
+ *      Destroys the MGR object. Called upon driver unloading.
+ *  Parameters:
+ *      hmgr_obj:     Handle to Manager object .
+ *  Returns:
+ *      0:        Success.
+ *                      DCD Manager freed; MGR Object destroyed;
+ *                      MGR Object deleted from the Registry.
+ *      -EPERM:      Failed to destroy MGR Object
+ *  Requires:
+ *      MGR Initialized (refs > 0 )
+ *      hmgr_obj is a valid MGR handle .
+ *  Ensures:
+ *      0:        MGR Object destroyed and hmgr_obj is Invalid MGR
+ *                      Handle.
+ */
+extern int mgr_destroy(struct mgr_object *hmgr_obj);
+
+/*
+ *  ======== mgr_enum_node_info ========
+ *  Purpose:
+ *      Enumerate and get configuration information about nodes configured
+ *      in the node database.
+ *  Parameters:
+ *      node_id:              The node index (base 0).
+ *      pndb_props:          Ptr to the dsp_ndbprops structure for output.
+ *      undb_props_size:      Size of the dsp_ndbprops structure.
+ *      pu_num_nodes:         Location where the number of nodes configured
+ *                          in the database will be returned.
+ *  Returns:
+ *      0:            Success.
+ *      -EINVAL:    Parameter node_id is > than the number of nodes.
+ *                          configutred in the system
+ *      -EIDRM:  During Enumeration there has been a change in
+ *                              the number of nodes configured or in the
+ *                              the properties of the enumerated nodes.
+ *      -EPERM:          Failed to querry the Node Data Base
+ *  Requires:
+ *      pNDBPROPS is not null
+ *      undb_props_size >= sizeof(dsp_ndbprops)
+ *      pu_num_nodes is not null
+ *      MGR Initialized (refs > 0 )
+ *  Ensures:
+ *      SUCCESS on successful retreival of data and *pu_num_nodes > 0 OR
+ *      DSP_FAILED  && *pu_num_nodes == 0.
+ *  Details:
+ */
+extern int mgr_enum_node_info(u32 node_id,
+				     struct dsp_ndbprops *pndb_props,
+				     u32 undb_props_size,
+				     u32 *pu_num_nodes);
+
+/*
+ *  ======== mgr_enum_processor_info ========
+ *  Purpose:
+ *      Enumerate and get configuration information about available DSP
+ *      processors
+ *  Parameters:
+ *      processor_id:         The processor index (zero-based).
+ *      processor_info:     Ptr to the dsp_processorinfo structure .
+ *      processor_info_size: Size of dsp_processorinfo structure.
+ *      pu_num_procs:         Location where the number of DSPs configured
+ *                          in the database will be returned
+ *  Returns:
+ *      0:            Success.
+ *      -EINVAL:    Parameter processor_id is > than the number of
+ *                          DSP Processors in the system.
+ *      -EPERM:          Failed to querry the Node Data Base
+ *  Requires:
+ *      processor_info is not null
+ *      pu_num_procs is not null
+ *      processor_info_size >= sizeof(dsp_processorinfo)
+ *      MGR Initialized (refs > 0 )
+ *  Ensures:
+ *      SUCCESS on successful retreival of data and *pu_num_procs > 0 OR
+ *      DSP_FAILED && *pu_num_procs == 0.
+ *  Details:
+ */
+extern int mgr_enum_processor_info(u32 processor_id,
+					  struct dsp_processorinfo
+					  *processor_info,
+					  u32 processor_info_size,
+					  u8 *pu_num_procs);
+/*
+ *  ======== mgr_exit ========
+ *  Purpose:
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      MGR is initialized.
+ *  Ensures:
+ *      When reference count == 0, MGR's private resources are freed.
+ */
+extern void mgr_exit(void);
+
+/*
+ *  ======== mgr_get_dcd_handle ========
+ *  Purpose:
+ *      Retrieves the MGR handle. Accessor Function
+ *  Parameters:
+ *      mgr_handle:     Handle to the Manager Object
+ *      dcd_handle:     Ptr to receive the DCD Handle.
+ *  Returns:
+ *      0:        Sucess
+ *      -EPERM:      Failure to get the Handle
+ *  Requires:
+ *      MGR is initialized.
+ *      dcd_handle != NULL
+ *  Ensures:
+ *      0 and *dcd_handle != NULL ||
+ *      -EPERM and *dcd_handle == NULL
+ */
+extern int mgr_get_dcd_handle(struct mgr_object
+				     *mgr_handle, u32 *dcd_handle);
+
+/*
+ *  ======== mgr_init ========
+ *  Purpose:
+ *      Initialize MGR's private state, keeping a reference count on each
+ *      call. Intializes the DCD.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      TRUE: A requirement for the other public MGR functions.
+ */
+extern bool mgr_init(void);
+
+#endif /* MGR_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mgrpriv.h b/drivers/staging/tidspbridge/include/dspbridge/mgrpriv.h
new file mode 100644
index 00000000000..bca4e103c7f
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/mgrpriv.h
@@ -0,0 +1,45 @@
+/*
+ * mgrpriv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global MGR constants and types, shared by PROC, MGR, and DSP API.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MGRPRIV_
+#define MGRPRIV_
+
+/*
+ * OMAP1510 specific
+ */
+#define MGR_MAXTLBENTRIES  32
+
+/* RM MGR Object */
+struct mgr_object;
+
+struct mgr_tlbentry {
+	u32 ul_dsp_virt;	/* DSP virtual address */
+	u32 ul_gpp_phys;	/* GPP physical address */
+};
+
+/*
+ *  The DSP_PROCESSOREXTINFO structure describes additional extended
+ *  capabilities of a DSP processor not exposed to user.
+ */
+struct mgr_processorextinfo {
+	struct dsp_processorinfo ty_basic;	/* user processor info */
+	/* private dsp mmu entries */
+	struct mgr_tlbentry ty_tlb[MGR_MAXTLBENTRIES];
+};
+
+#endif /* MGRPRIV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/msg.h b/drivers/staging/tidspbridge/include/dspbridge/msg.h
new file mode 100644
index 00000000000..95778bcb5aa
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/msg.h
@@ -0,0 +1,86 @@
+/*
+ * msg.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge msg_ctrl Module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MSG_
+#define MSG_
+
+#include <dspbridge/devdefs.h>
+#include <dspbridge/msgdefs.h>
+
+/*
+ *  ======== msg_create ========
+ *  Purpose:
+ *      Create an object to manage message queues. Only one of these objects
+ *      can exist per device object. The msg_ctrl manager must be created before
+ *      the IO Manager.
+ *  Parameters:
+ *      msg_man:            Location to store msg_ctrl manager handle on output.
+ *      hdev_obj:         The device object.
+ *      msg_callback:        Called whenever an RMS_EXIT message is received.
+ *  Returns:
+ *  Requires:
+ *      msg_mod_init(void) called.
+ *      msg_man != NULL.
+ *      hdev_obj != NULL.
+ *      msg_callback != NULL.
+ *  Ensures:
+ */
+extern int msg_create(struct msg_mgr **msg_man,
+			     struct dev_object *hdev_obj,
+			     msg_onexit msg_callback);
+
+/*
+ *  ======== msg_delete ========
+ *  Purpose:
+ *      Delete a msg_ctrl manager allocated in msg_create().
+ *  Parameters:
+ *      hmsg_mgr:            Handle returned from msg_create().
+ *  Returns:
+ *  Requires:
+ *      msg_mod_init(void) called.
+ *      Valid hmsg_mgr.
+ *  Ensures:
+ */
+extern void msg_delete(struct msg_mgr *hmsg_mgr);
+
+/*
+ *  ======== msg_exit ========
+ *  Purpose:
+ *      Discontinue usage of msg_ctrl module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      msg_mod_init(void) successfully called before.
+ *  Ensures:
+ *      Any resources acquired in msg_mod_init(void) will be freed when last
+ *      msg_ctrl client calls msg_exit(void).
+ */
+extern void msg_exit(void);
+
+/*
+ *  ======== msg_mod_init ========
+ *  Purpose:
+ *      Initialize the msg_ctrl module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialization succeeded, FALSE otherwise.
+ *  Ensures:
+ */
+extern bool msg_mod_init(void);
+
+#endif /* MSG_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/msgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/msgdefs.h
new file mode 100644
index 00000000000..80a3fa1a8a3
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/msgdefs.h
@@ -0,0 +1,29 @@
+/*
+ * msgdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global msg_ctrl constants and types.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MSGDEFS_
+#define MSGDEFS_
+
+/* msg_ctrl Objects: */
+struct msg_mgr;
+struct msg_queue;
+
+/* Function prototype for callback to be called on RMS_EXIT message received */
+typedef void (*msg_onexit) (void *h, s32 node_status);
+
+#endif /* MSGDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/nldr.h b/drivers/staging/tidspbridge/include/dspbridge/nldr.h
new file mode 100644
index 00000000000..d9653ee667e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/nldr.h
@@ -0,0 +1,57 @@
+/*
+ * nldr.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge dynamic loader interface.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/dbdcddef.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/rmm.h>
+#include <dspbridge/nldrdefs.h>
+
+#ifndef NLDR_
+#define NLDR_
+
+extern int nldr_allocate(struct nldr_object *nldr_obj,
+				void *priv_ref, const struct dcd_nodeprops
+				*node_props,
+				struct nldr_nodeobject **nldr_nodeobj,
+				bool *pf_phase_split);
+
+extern int nldr_create(struct nldr_object **nldr,
+			      struct dev_object *hdev_obj,
+			      const struct nldr_attrs *pattrs);
+
+extern void nldr_delete(struct nldr_object *nldr_obj);
+extern void nldr_exit(void);
+
+extern int nldr_get_fxn_addr(struct nldr_nodeobject *nldr_node_obj,
+				    char *str_fxn, u32 * addr);
+
+extern int nldr_get_rmm_manager(struct nldr_object *nldr,
+				       struct rmm_target_obj **rmm_mgr);
+
+extern bool nldr_init(void);
+extern int nldr_load(struct nldr_nodeobject *nldr_node_obj,
+			    enum nldr_phase phase);
+extern int nldr_unload(struct nldr_nodeobject *nldr_node_obj,
+			      enum nldr_phase phase);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+int nldr_find_addr(struct nldr_nodeobject *nldr_node, u32 sym_addr,
+	u32 offset_range, void *offset_output, char *sym_name);
+#endif
+
+#endif /* NLDR_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/nldrdefs.h b/drivers/staging/tidspbridge/include/dspbridge/nldrdefs.h
new file mode 100644
index 00000000000..c85d3da3fe2
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/nldrdefs.h
@@ -0,0 +1,293 @@
+/*
+ * nldrdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global Dynamic + static/overlay Node loader (NLDR) constants and types.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef NLDRDEFS_
+#define NLDRDEFS_
+
+#include <dspbridge/dbdcddef.h>
+#include <dspbridge/devdefs.h>
+
+#define NLDR_MAXPATHLENGTH       255
+/* NLDR Objects: */
+struct nldr_object;
+struct nldr_nodeobject;
+
+/*
+ *  ======== nldr_loadtype ========
+ *  Load types for a node. Must match values in node.h55.
+ */
+enum nldr_loadtype {
+	NLDR_STATICLOAD,	/* Linked in base image, not overlay */
+	NLDR_DYNAMICLOAD,	/* Dynamically loaded node */
+	NLDR_OVLYLOAD		/* Linked in base image, overlay node */
+};
+
+/*
+ *  ======== nldr_ovlyfxn ========
+ *  Causes code or data to be copied from load address to run address. This
+ *  is the "cod_writefxn" that gets passed to the DBLL_Library and is used as
+ *  the ZL write function.
+ *
+ *  Parameters:
+ *      priv_ref:       Handle to identify the node.
+ *      dsp_run_addr:   Run address of code or data.
+ *      dsp_load_addr:  Load address of code or data.
+ *      ul_num_bytes:     Number of (GPP) bytes to copy.
+ *      mem_space:      RMS_CODE or RMS_DATA.
+ *  Returns:
+ *      ul_num_bytes:     Success.
+ *      0:              Failure.
+ *  Requires:
+ *  Ensures:
+ */
+typedef u32(*nldr_ovlyfxn) (void *priv_ref, u32 dsp_run_addr,
+			    u32 dsp_load_addr, u32 ul_num_bytes, u32 mem_space);
+
+/*
+ *  ======== nldr_writefxn ========
+ *  Write memory function. Used for dynamic load writes.
+ *  Parameters:
+ *      priv_ref:       Handle to identify the node.
+ *      dsp_add:        Address of code or data.
+ *      pbuf:           Code or data to be written
+ *      ul_num_bytes:     Number of (GPP) bytes to write.
+ *      mem_space:      DBLL_DATA or DBLL_CODE.
+ *  Returns:
+ *      ul_num_bytes:     Success.
+ *      0:              Failure.
+ *  Requires:
+ *  Ensures:
+ */
+typedef u32(*nldr_writefxn) (void *priv_ref,
+			     u32 dsp_add, void *pbuf,
+			     u32 ul_num_bytes, u32 mem_space);
+
+/*
+ *  ======== nldr_attrs ========
+ *  Attributes passed to nldr_create function.
+ */
+struct nldr_attrs {
+	nldr_ovlyfxn pfn_ovly;
+	nldr_writefxn pfn_write;
+	u16 us_dsp_word_size;
+	u16 us_dsp_mau_size;
+};
+
+/*
+ *  ======== nldr_phase ========
+ *  Indicates node create, delete, or execute phase function.
+ */
+enum nldr_phase {
+	NLDR_CREATE,
+	NLDR_DELETE,
+	NLDR_EXECUTE,
+	NLDR_NOPHASE
+};
+
+/*
+ *  Typedefs of loader functions imported from a DLL, or defined in a
+ *  function table.
+ */
+
+/*
+ *  ======== nldr_allocate ========
+ *  Allocate resources to manage the loading of a node on the DSP.
+ *
+ *  Parameters:
+ *      nldr_obj:          Handle of loader that will load the node.
+ *      priv_ref:       Handle to identify the node.
+ *      node_props:     Pointer to a dcd_nodeprops for the node.
+ *      nldr_nodeobj:   Location to store node handle on output. This handle
+ *                      will be passed to nldr_load/nldr_unload.
+ *      pf_phase_split:   pointer to int variable referenced in node.c
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Insufficient memory on GPP.
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_obj.
+ *      node_props != NULL.
+ *      nldr_nodeobj != NULL.
+ *  Ensures:
+ *      0:        IsValidNode(*nldr_nodeobj).
+ *      error:          *nldr_nodeobj == NULL.
+ */
+typedef int(*nldr_allocatefxn) (struct nldr_object *nldr_obj,
+				       void *priv_ref,
+				       const struct dcd_nodeprops
+				       * node_props,
+				       struct nldr_nodeobject
+				       **nldr_nodeobj,
+				       bool *pf_phase_split);
+
+/*
+ *  ======== nldr_create ========
+ *  Create a loader object. This object handles the loading and unloading of
+ *  create, delete, and execute phase functions of nodes on the DSP target.
+ *
+ *  Parameters:
+ *      nldr:           Location to store loader handle on output.
+ *      hdev_obj:     Device for this processor.
+ *      pattrs:         Loader attributes.
+ *  Returns:
+ *      0:        Success;
+ *      -ENOMEM:    Insufficient memory for requested resources.
+ *  Requires:
+ *      nldr_init(void) called.
+ *      nldr != NULL.
+ *      hdev_obj != NULL.
+ *	pattrs != NULL.
+ *  Ensures:
+ *      0:        Valid *nldr.
+ *      error:          *nldr == NULL.
+ */
+typedef int(*nldr_createfxn) (struct nldr_object **nldr,
+				     struct dev_object *hdev_obj,
+				     const struct nldr_attrs *pattrs);
+
+/*
+ *  ======== nldr_delete ========
+ *  Delete the NLDR loader.
+ *
+ *  Parameters:
+ *      nldr_obj:          Node manager object.
+ *  Returns:
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_obj.
+ *  Ensures:
+ *	nldr_obj invalid
+ */
+typedef void (*nldr_deletefxn) (struct nldr_object *nldr_obj);
+
+/*
+ *  ======== nldr_exit ========
+ *  Discontinue usage of NLDR module.
+ *
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      nldr_init(void) successfully called before.
+ *  Ensures:
+ *      Any resources acquired in nldr_init(void) will be freed when last NLDR
+ *      client calls nldr_exit(void).
+ */
+typedef void (*nldr_exitfxn) (void);
+
+/*
+ *  ======== NLDR_Free ========
+ *  Free resources allocated in nldr_allocate.
+ *
+ *  Parameters:
+ *      nldr_node_obj:      Handle returned from nldr_allocate().
+ *  Returns:
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_node_obj.
+ *  Ensures:
+ */
+typedef void (*nldr_freefxn) (struct nldr_nodeobject *nldr_node_obj);
+
+/*
+ *  ======== nldr_get_fxn_addr ========
+ *  Get address of create, delete, or execute phase function of a node on
+ *  the DSP.
+ *
+ *  Parameters:
+ *      nldr_node_obj:      Handle returned from nldr_allocate().
+ *      str_fxn:        Name of function.
+ *      addr:           Location to store function address.
+ *  Returns:
+ *      0:        Success.
+ *      -ESPIPE:    Address of function not found.
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_node_obj.
+ *      addr != NULL;
+ *      str_fxn != NULL;
+ *  Ensures:
+ */
+typedef int(*nldr_getfxnaddrfxn) (struct nldr_nodeobject
+					 * nldr_node_obj,
+					 char *str_fxn, u32 * addr);
+
+/*
+ *  ======== nldr_init ========
+ *  Initialize the NLDR module.
+ *
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialization succeeded, FALSE otherwise.
+ *  Ensures:
+ */
+typedef bool(*nldr_initfxn) (void);
+
+/*
+ *  ======== nldr_load ========
+ *  Load create, delete, or execute phase function of a node on the DSP.
+ *
+ *  Parameters:
+ *      nldr_node_obj:      Handle returned from nldr_allocate().
+ *      phase:          Type of function to load (create, delete, or execute).
+ *  Returns:
+ *      0:                Success.
+ *      -ENOMEM:            Insufficient memory on GPP.
+ *      -ENXIO:     Can't overlay phase because overlay memory
+ *                              is already in use.
+ *      -EILSEQ:           Failure in dynamic loader library.
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_node_obj.
+ *  Ensures:
+ */
+typedef int(*nldr_loadfxn) (struct nldr_nodeobject *nldr_node_obj,
+				   enum nldr_phase phase);
+
+/*
+ *  ======== nldr_unload ========
+ *  Unload create, delete, or execute phase function of a node on the DSP.
+ *
+ *  Parameters:
+ *      nldr_node_obj:      Handle returned from nldr_allocate().
+ *      phase:          Node function to unload (create, delete, or execute).
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Insufficient memory on GPP.
+ *  Requires:
+ *      nldr_init(void) called.
+ *      Valid nldr_node_obj.
+ *  Ensures:
+ */
+typedef int(*nldr_unloadfxn) (struct nldr_nodeobject *nldr_node_obj,
+				     enum nldr_phase phase);
+
+/*
+ *  ======== node_ldr_fxns ========
+ */
+struct node_ldr_fxns {
+	nldr_allocatefxn pfn_allocate;
+	nldr_createfxn pfn_create;
+	nldr_deletefxn pfn_delete;
+	nldr_exitfxn pfn_exit;
+	nldr_getfxnaddrfxn pfn_get_fxn_addr;
+	nldr_initfxn pfn_init;
+	nldr_loadfxn pfn_load;
+	nldr_unloadfxn pfn_unload;
+};
+
+#endif /* NLDRDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/node.h b/drivers/staging/tidspbridge/include/dspbridge/node.h
new file mode 100644
index 00000000000..49ed5c1128e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/node.h
@@ -0,0 +1,583 @@
+/*
+ * node.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Node Manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef NODE_
+#define NODE_
+
+#include <dspbridge/procpriv.h>
+
+#include <dspbridge/nodedefs.h>
+#include <dspbridge/dispdefs.h>
+#include <dspbridge/nldrdefs.h>
+#include <dspbridge/drv.h>
+
+/*
+ *  ======== node_allocate ========
+ *  Purpose:
+ *      Allocate GPP resources to manage a node on the DSP.
+ *  Parameters:
+ *      hprocessor:         Handle of processor that is allocating the node.
+ *      node_uuid:          Pointer to a dsp_uuid for the node.
+ *      pargs:              Optional arguments to be passed to the node.
+ *      attr_in:            Optional pointer to node attributes (priority,
+ *                          timeout...)
+ *      noderes:             Location to store node resource info.
+ *  Returns:
+ *      0:            Success.
+ *      -ENOMEM:        Insufficient memory on GPP.
+ *      -ENOKEY:          Node UUID has not been registered.
+ *      -ESPIPE:        iAlg functions not found for a DAIS node.
+ *      -EDOM:         attr_in != NULL and attr_in->prio out of
+ *                          range.
+ *      -EPERM:          A failure occured, unable to allocate node.
+ *      -EBADR:    Proccessor is not in the running state.
+ *  Requires:
+ *      node_init(void) called.
+ *      hprocessor != NULL.
+ *      node_uuid != NULL.
+ *      noderes != NULL.
+ *  Ensures:
+ *      0:            IsValidNode(*ph_node).
+ *      error:              *noderes == NULL.
+ */
+extern int node_allocate(struct proc_object *hprocessor,
+				const struct dsp_uuid *node_uuid,
+				const struct dsp_cbdata
+				*pargs, const struct dsp_nodeattrin
+				*attr_in,
+				struct node_res_object **noderes,
+				struct process_context *pr_ctxt);
+
+/*
+ *  ======== node_alloc_msg_buf ========
+ *  Purpose:
+ *      Allocate and Prepare a buffer whose descriptor will be passed to a
+ *      Node within a (dsp_msg)message
+ *  Parameters:
+ *      hnode:          The node handle.
+ *      usize:          The size of the buffer to be allocated.
+ *      pattr:          Pointer to a dsp_bufferattr structure.
+ *      pbuffer:        Location to store the address of the allocated
+ *                      buffer on output.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid node handle.
+ *      -ENOMEM:    Insufficent memory.
+ *      -EPERM:      General Failure.
+ *      -EINVAL:      Invalid Size.
+ *  Requires:
+ *      node_init(void) called.
+ *      pbuffer != NULL.
+ *  Ensures:
+ */
+extern int node_alloc_msg_buf(struct node_object *hnode,
+				     u32 usize, struct dsp_bufferattr
+				     *pattr, u8 **pbuffer);
+
+/*
+ *  ======== node_change_priority ========
+ *  Purpose:
+ *      Change the priority of an allocated node.
+ *  Parameters:
+ *      hnode:              Node handle returned from node_allocate.
+ *      prio:          New priority level to set node's priority to.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -EDOM:         prio is out of range.
+ *      -EPERM: The specified node is not a task node.
+ *              Unable to change node's runtime priority level.
+ *      -EBADR:    Node is not in the NODE_ALLOCATED, NODE_PAUSED,
+ *                          or NODE_RUNNING state.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ *      0 && (Node's current priority == prio)
+ */
+extern int node_change_priority(struct node_object *hnode, s32 prio);
+
+/*
+ *  ======== node_close_orphans ========
+ *  Purpose:
+ *      Delete all nodes whose owning processor is being destroyed.
+ *  Parameters:
+ *      hnode_mgr:       Node manager object.
+ *      proc:          Handle to processor object being destroyed.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Unable to delete all nodes belonging to proc.
+ *  Requires:
+ *      Valid hnode_mgr.
+ *      proc != NULL.
+ *  Ensures:
+ */
+extern int node_close_orphans(struct node_mgr *hnode_mgr,
+				     struct proc_object *proc);
+
+/*
+ *  ======== node_connect ========
+ *  Purpose:
+ *      Connect two nodes on the DSP, or a node on the DSP to the GPP. In the
+ *      case that the connnection is being made between a node on the DSP and
+ *      the GPP, one of the node handles (either node1 or node2) must be
+ *      the constant NODE_HGPPNODE.
+ *  Parameters:
+ *      node1:         Handle of first node to connect to second node. If
+ *                      this is a connection from the GPP to node2, node1
+ *                      must be the constant NODE_HGPPNODE. Otherwise, node1
+ *                      must be a node handle returned from a successful call
+ *                      to Node_Allocate().
+ *      node2:         Handle of second node. Must be either NODE_HGPPNODE
+ *                      if this is a connection from DSP node to GPP, or a
+ *                      node handle returned from a successful call to
+ *                      node_allocate().
+ *      stream1:        Output stream index on first node, to be connected
+ *                      to second node's input stream. Value must range from
+ *                      0 <= stream1 < number of output streams.
+ *      stream2:        Input stream index on second node. Value must range
+ *                      from 0 <= stream2 < number of input streams.
+ *      pattrs:         Stream attributes (NULL ==> use defaults).
+ *      conn_param:     A pointer to a dsp_cbdata structure that defines
+ *                      connection parameter for device nodes to pass to DSP
+ *                      side.
+ *                      If the value of this parameter is NULL, then this API
+ *                      behaves like DSPNode_Connect. This parameter will have
+ *                      length of the string and the null terminated string in
+ *                      dsp_cbdata struct. This can be extended in future tp
+ *                      pass binary data.
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:            Invalid node1 or node2.
+ *      -ENOMEM:            Insufficient host memory.
+ *      -EINVAL:             A stream index parameter is invalid.
+ *      -EISCONN:  A connection already exists for one of the
+ *                              indices stream1 or stream2.
+ *      -EBADR:        Either node1 or node2 is not in the
+ *                              NODE_ALLOCATED state.
+ *      -ECONNREFUSED: No more connections available.
+ *      -EPERM:              Attempt to make an illegal connection (eg,
+ *                              Device node to device node, or device node to
+ *                              GPP), the two nodes are on different DSPs.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ */
+extern int node_connect(struct node_object *node1,
+			       u32 stream1,
+			       struct node_object *node2,
+			       u32 stream2,
+			       struct dsp_strmattr *pattrs,
+			       struct dsp_cbdata
+			       *conn_param);
+
+/*
+ *  ======== node_create ========
+ *  Purpose:
+ *      Create a node on the DSP by remotely calling the node's create
+ *      function. If necessary, load code that contains the node's create
+ *      function.
+ *  Parameters:
+ *      hnode:              Node handle returned from node_allocate().
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -ESPIPE:        Create function not found in the COFF file.
+ *      -EBADR:    Node is not in the NODE_ALLOCATED state.
+ *      -ENOMEM:        Memory allocation failure on the DSP.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *      -EPERM:          A failure occurred, unable to create node.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ */
+extern int node_create(struct node_object *hnode);
+
+/*
+ *  ======== node_create_mgr ========
+ *  Purpose:
+ *      Create a NODE Manager object. This object handles the creation,
+ *      deletion, and execution of nodes on the DSP target. The NODE Manager
+ *      also maintains a pipe map of used and available node connections.
+ *      Each DEV object should have exactly one NODE Manager object.
+ *
+ *  Parameters:
+ *      node_man:       Location to store node manager handle on output.
+ *      hdev_obj:     Device for this processor.
+ *  Returns:
+ *      0:        Success;
+ *      -ENOMEM:    Insufficient memory for requested resources.
+ *      -EPERM:      General failure.
+ *  Requires:
+ *      node_init(void) called.
+ *      node_man != NULL.
+ *      hdev_obj != NULL.
+ *  Ensures:
+ *      0:        Valide *node_man.
+ *      error:          *node_man == NULL.
+ */
+extern int node_create_mgr(struct node_mgr **node_man,
+				  struct dev_object *hdev_obj);
+
+/*
+ *  ======== node_delete ========
+ *  Purpose:
+ *      Delete resources allocated in node_allocate(). If the node was
+ *      created, delete the node on the DSP by remotely calling the node's
+ *      delete function. Loads the node's delete function if necessary.
+ *      GPP side resources are freed after node's delete function returns.
+ *  Parameters:
+ *      noderes:              Node resource info handle returned from
+ *                                 node_allocate().
+ *      pr_ctxt:                Poninter to process context data.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *      -EPERM:          A failure occurred in deleting the node.
+ *      -ESPIPE:        Delete function not found in the COFF file.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ *      0:            hnode is invalid.
+ */
+extern int node_delete(struct node_res_object *noderes,
+			      struct process_context *pr_ctxt);
+
+/*
+ *  ======== node_delete_mgr ========
+ *  Purpose:
+ *      Delete the NODE Manager.
+ *  Parameters:
+ *      hnode_mgr:       Node manager object.
+ *  Returns:
+ *      0:        Success.
+ *  Requires:
+ *      node_init(void) called.
+ *      Valid hnode_mgr.
+ *  Ensures:
+ */
+extern int node_delete_mgr(struct node_mgr *hnode_mgr);
+
+/*
+ *  ======== node_enum_nodes ========
+ *  Purpose:
+ *      Enumerate the nodes currently allocated for the DSP.
+ *  Parameters:
+ *      hnode_mgr:       Node manager returned from node_create_mgr().
+ *      node_tab:       Array to copy node handles into.
+ *      node_tab_size:   Number of handles that can be written to node_tab.
+ *      pu_num_nodes:     Location where number of node handles written to
+ *                      node_tab will be written.
+ *      pu_allocated:    Location to write total number of allocated nodes.
+ *  Returns:
+ *      0:        Success.
+ *      -EINVAL:      node_tab is too small to hold all node handles.
+ *  Requires:
+ *      Valid hnode_mgr.
+ *      node_tab != NULL || node_tab_size == 0.
+ *      pu_num_nodes != NULL.
+ *      pu_allocated != NULL.
+ *  Ensures:
+ *      - (-EINVAL && *pu_num_nodes == 0)
+ *      - || (0 && *pu_num_nodes <= node_tab_size)  &&
+ *        (*pu_allocated == *pu_num_nodes)
+ */
+extern int node_enum_nodes(struct node_mgr *hnode_mgr,
+				  void **node_tab,
+				  u32 node_tab_size,
+				  u32 *pu_num_nodes,
+				  u32 *pu_allocated);
+
+/*
+ *  ======== node_exit ========
+ *  Purpose:
+ *      Discontinue usage of NODE module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      node_init(void) successfully called before.
+ *  Ensures:
+ *      Any resources acquired in node_init(void) will be freed when last NODE
+ *      client calls node_exit(void).
+ */
+extern void node_exit(void);
+
+/*
+ *  ======== node_free_msg_buf ========
+ *  Purpose:
+ *      Free a message buffer previously allocated with node_alloc_msg_buf.
+ *  Parameters:
+ *      hnode:          The node handle.
+ *      pbuffer:        (Address) Buffer allocated by node_alloc_msg_buf.
+ *      pattr:          Same buffer attributes passed to node_alloc_msg_buf.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid node handle.
+ *      -EPERM:      Failure to free the buffer.
+ *  Requires:
+ *      node_init(void) called.
+ *      pbuffer != NULL.
+ *  Ensures:
+ */
+extern int node_free_msg_buf(struct node_object *hnode,
+				    u8 *pbuffer,
+				    struct dsp_bufferattr
+				    *pattr);
+
+/*
+ *  ======== node_get_attr ========
+ *  Purpose:
+ *      Copy the current attributes of the specified node into a dsp_nodeattr
+ *      structure.
+ *  Parameters:
+ *      hnode:          Node object allocated from node_allocate().
+ *      pattr:          Pointer to dsp_nodeattr structure to copy node's
+ *                      attributes.
+ *      attr_size:      Size of pattr.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *  Requires:
+ *      node_init(void) called.
+ *      pattr != NULL.
+ *  Ensures:
+ *      0:        *pattrs contains the node's current attributes.
+ */
+extern int node_get_attr(struct node_object *hnode,
+				struct dsp_nodeattr *pattr, u32 attr_size);
+
+/*
+ *  ======== node_get_message ========
+ *  Purpose:
+ *      Retrieve a message from a node on the DSP. The node must be either a
+ *      message node, task node, or XDAIS socket node.
+ *      If a message is not available, this function will block until a
+ *      message is available, or the node's timeout value is reached.
+ *  Parameters:
+ *      hnode:          Node handle returned from node_allocate().
+ *      message:       Pointer to dsp_msg structure to copy the
+ *                      message into.
+ *      utimeout:       Timeout in milliseconds to wait for message.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *      -EPERM: Cannot retrieve messages from this type of node.
+ *              Error occurred while trying to retrieve a message.
+ *      -ETIME:   Timeout occurred and no message is available.
+ *  Requires:
+ *      node_init(void) called.
+ *      message != NULL.
+ *  Ensures:
+ */
+extern int node_get_message(struct node_object *hnode,
+				   struct dsp_msg *message, u32 utimeout);
+
+/*
+ *  ======== node_get_nldr_obj ========
+ *  Purpose:
+ *      Retrieve the Nldr manager
+ *  Parameters:
+ *      hnode_mgr:       Node Manager
+ *      nldr_ovlyobj:   Pointer to a Nldr manager handle
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *  Ensures:
+ */
+extern int node_get_nldr_obj(struct node_mgr *hnode_mgr,
+				    struct nldr_object **nldr_ovlyobj);
+
+/*
+ *  ======== node_init ========
+ *  Purpose:
+ *      Initialize the NODE module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialization succeeded, FALSE otherwise.
+ *  Ensures:
+ */
+extern bool node_init(void);
+
+/*
+ *  ======== node_on_exit ========
+ *  Purpose:
+ *      Gets called when RMS_EXIT is received for a node. PROC needs to pass
+ *      this function as a parameter to msg_create(). This function then gets
+ *      called by the Bridge driver when an exit message for a node is received.
+ *  Parameters:
+ *      hnode:      Handle of the node that the exit message is for.
+ *      node_status:    Return status of the node's execute phase.
+ *  Returns:
+ *  Ensures:
+ */
+void node_on_exit(struct node_object *hnode, s32 node_status);
+
+/*
+ *  ======== node_pause ========
+ *  Purpose:
+ *      Suspend execution of a node currently running on the DSP.
+ *  Parameters:
+ *      hnode:              Node object representing a node currently
+ *                          running on the DSP.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -EPERM: Node is not a task or socket node.
+ *              Failed to pause node.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *      DSP_EWRONGSTSATE:   Node is not in NODE_RUNNING state.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ */
+extern int node_pause(struct node_object *hnode);
+
+/*
+ *  ======== node_put_message ========
+ *  Purpose:
+ *      Send a message to a message node, task node, or XDAIS socket node.
+ *      This function will block until the message stream can accommodate
+ *      the message, or a timeout occurs. The message will be copied, so Msg
+ *      can be re-used immediately after return.
+ *  Parameters:
+ *      hnode:              Node handle returned by node_allocate().
+ *      pmsg:               Location of message to be sent to the node.
+ *      utimeout:           Timeout in msecs to wait.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -EPERM: Messages can't be sent to this type of node.
+ *              Unable to send message.
+ *      -ETIME:       Timeout occurred before message could be set.
+ *      -EBADR:    Node is in invalid state for sending messages.
+ *  Requires:
+ *      node_init(void) called.
+ *      pmsg != NULL.
+ *  Ensures:
+ */
+extern int node_put_message(struct node_object *hnode,
+				   const struct dsp_msg *pmsg, u32 utimeout);
+
+/*
+ *  ======== node_register_notify ========
+ *  Purpose:
+ *      Register to be notified on specific events for this node.
+ *  Parameters:
+ *      hnode:          Node handle returned by node_allocate().
+ *      event_mask:     Mask of types of events to be notified about.
+ *      notify_type:    Type of notification to be sent.
+ *      hnotification:  Handle to be used for notification.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *      -ENOMEM:    Insufficient memory on GPP.
+ *      -EINVAL:     event_mask is invalid.
+ *      -ENOSYS:   Notification type specified by notify_type is not
+ *                      supported.
+ *  Requires:
+ *      node_init(void) called.
+ *      hnotification != NULL.
+ *  Ensures:
+ */
+extern int node_register_notify(struct node_object *hnode,
+				       u32 event_mask, u32 notify_type,
+				       struct dsp_notification
+				       *hnotification);
+
+/*
+ *  ======== node_run ========
+ *  Purpose:
+ *      Start execution of a node's execute phase, or resume execution of
+ *      a node that has been suspended (via node_pause()) on the DSP. Load
+ *      the node's execute function if necessary.
+ *  Parameters:
+ *      hnode:              Node object representing a node currently
+ *                          running on the DSP.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -EPERM: hnode doesn't represent a message, task or dais socket node.
+ *              Unable to start or resume execution.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *      DSP_EWRONGSTSATE:   Node is not in NODE_PAUSED or NODE_CREATED state.
+ *      -ESPIPE:        Execute function not found in the COFF file.
+ *  Requires:
+ *      node_init(void) called.
+ *  Ensures:
+ */
+extern int node_run(struct node_object *hnode);
+
+/*
+ *  ======== node_terminate ========
+ *  Purpose:
+ *      Signal a node running on the DSP that it should exit its execute
+ *      phase function.
+ *  Parameters:
+ *      hnode:              Node object representing a node currently
+ *                          running on the DSP.
+ *      pstatus:            Location to store execute-phase function return
+ *                          value.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid hnode.
+ *      -ETIME:       A timeout occurred before the DSP responded.
+ *      -EPERM: Type of node specified cannot be terminated.
+ *              Unable to terminate the node.
+ *      -EBADR:    Operation not valid for the current node state.
+ *  Requires:
+ *      node_init(void) called.
+ *      pstatus != NULL.
+ *  Ensures:
+ */
+extern int node_terminate(struct node_object *hnode,
+				 int *pstatus);
+
+/*
+ *  ======== node_get_uuid_props ========
+ *  Purpose:
+ *      Fetch Node properties given the UUID
+ *  Parameters:
+ *
+ */
+extern int node_get_uuid_props(void *hprocessor,
+				      const struct dsp_uuid *node_uuid,
+				      struct dsp_ndbprops
+				      *node_props);
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/**
+ * node_find_addr() - Find the closest symbol to the given address.
+ *
+ * @node_mgr:		Node manager handle
+ * @sym_addr:		Given address to find the closest symbol
+ * @offset_range:		offset range to look fo the closest symbol
+ * @sym_addr_output:	Symbol Output address
+ * @sym_name:		String with the symbol name of the closest symbol
+ *
+ * 	This function finds the closest symbol to the address where a MMU
+ *	Fault occurred on the DSP side.
+ */
+int node_find_addr(struct node_mgr *node_mgr, u32 sym_addr,
+				u32 offset_range, void *sym_addr_output,
+				char *sym_name);
+
+enum node_state node_get_state(void *hnode);
+#endif
+
+#endif /* NODE_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/nodedefs.h b/drivers/staging/tidspbridge/include/dspbridge/nodedefs.h
new file mode 100644
index 00000000000..fb9623d8a79
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/nodedefs.h
@@ -0,0 +1,28 @@
+/*
+ * nodedefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global NODE constants and types, shared by PROCESSOR, NODE, and DISP.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef NODEDEFS_
+#define NODEDEFS_
+
+#define NODE_SUSPENDEDPRI -1
+
+/* NODE Objects: */
+struct node_mgr;
+struct node_object;
+
+#endif /* NODEDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/nodepriv.h b/drivers/staging/tidspbridge/include/dspbridge/nodepriv.h
new file mode 100644
index 00000000000..16b0233fc5d
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/nodepriv.h
@@ -0,0 +1,182 @@
+/*
+ * nodepriv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Private node header shared by NODE and DISP.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef NODEPRIV_
+#define NODEPRIV_
+
+#include <dspbridge/strmdefs.h>
+#include <dspbridge/nodedefs.h>
+#include <dspbridge/nldrdefs.h>
+
+/* DSP address of node environment structure */
+typedef u32 nodeenv;
+
+/*
+ *  Node create structures
+ */
+
+/* Message node */
+struct node_msgargs {
+	u32 max_msgs;		/* Max # of simultaneous messages for node */
+	u32 seg_id;		/* Segment for allocating message buffers */
+	u32 notify_type;	/* Notify type (SEM_post, SWI_post, etc.) */
+	u32 arg_length;		/* Length in 32-bit words of arg data block */
+	u8 *pdata;		/* Argument data for node */
+};
+
+struct node_strmdef {
+	u32 buf_size;		/* Size of buffers for SIO stream */
+	u32 num_bufs;		/* max # of buffers in SIO stream at once */
+	u32 seg_id;		/* Memory segment id to allocate buffers */
+	u32 utimeout;		/* Timeout for blocking SIO calls */
+	u32 buf_alignment;	/* Buffer alignment */
+	char *sz_device;	/* Device name for stream */
+};
+
+/* Task node */
+struct node_taskargs {
+	struct node_msgargs node_msg_args;
+	s32 prio;
+	u32 stack_size;
+	u32 sys_stack_size;
+	u32 stack_seg;
+	u32 udsp_heap_res_addr;	/* DSP virtual heap address */
+	u32 udsp_heap_addr;	/* DSP virtual heap address */
+	u32 heap_size;		/* Heap size */
+	u32 ugpp_heap_addr;	/* GPP virtual heap address */
+	u32 profile_id;		/* Profile ID */
+	u32 num_inputs;
+	u32 num_outputs;
+	u32 ul_dais_arg;	/* Address of iAlg object */
+	struct node_strmdef *strm_in_def;
+	struct node_strmdef *strm_out_def;
+};
+
+/*
+ *  ======== node_createargs ========
+ */
+struct node_createargs {
+	union {
+		struct node_msgargs node_msg_args;
+		struct node_taskargs task_arg_obj;
+	} asa;
+};
+
+/*
+ *  ======== node_get_channel_id ========
+ *  Purpose:
+ *      Get the channel index reserved for a stream connection between the
+ *      host and a node. This index is reserved when node_connect() is called
+ *      to connect the node with the host. This index should be passed to
+ *      the CHNL_Open function when the stream is actually opened.
+ *  Parameters:
+ *      hnode:          Node object allocated from node_allocate().
+ *      dir:           Input (DSP_TONODE) or output (DSP_FROMNODE).
+ *      index:         Stream index.
+ *      chan_id:        Location to store channel index.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *      -EPERM:  Not a task or DAIS socket node.
+ *      -EINVAL:     The node's stream corresponding to index and dir
+ *                      is not a stream to or from the host.
+ *  Requires:
+ *      node_init(void) called.
+ *      Valid dir.
+ *      chan_id != NULL.
+ *  Ensures:
+ */
+extern int node_get_channel_id(struct node_object *hnode,
+				      u32 dir, u32 index, u32 *chan_id);
+
+/*
+ *  ======== node_get_strm_mgr ========
+ *  Purpose:
+ *      Get the STRM manager for a node.
+ *  Parameters:
+ *      hnode:          Node allocated with node_allocate().
+ *      strm_man:       Location to store STRM manager on output.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *  Requires:
+ *      strm_man != NULL.
+ *  Ensures:
+ */
+extern int node_get_strm_mgr(struct node_object *hnode,
+				    struct strm_mgr **strm_man);
+
+/*
+ *  ======== node_get_timeout ========
+ *  Purpose:
+ *      Get the timeout value of a node.
+ *  Parameters:
+ *      hnode:      Node allocated with node_allocate(), or DSP_HGPPNODE.
+ *  Returns:
+ *      Node's timeout value.
+ *  Requires:
+ *      Valid hnode.
+ *  Ensures:
+ */
+extern u32 node_get_timeout(struct node_object *hnode);
+
+/*
+ *  ======== node_get_type ========
+ *  Purpose:
+ *      Get the type (device, message, task, or XDAIS socket) of a node.
+ *  Parameters:
+ *      hnode:      Node allocated with node_allocate(), or DSP_HGPPNODE.
+ *  Returns:
+ *      Node type:  NODE_DEVICE, NODE_TASK, NODE_XDAIS, or NODE_GPP.
+ *  Requires:
+ *      Valid hnode.
+ *  Ensures:
+ */
+extern enum node_type node_get_type(struct node_object *hnode);
+
+/*
+ *  ======== get_node_info ========
+ *  Purpose:
+ *      Get node information without holding semaphore.
+ *  Parameters:
+ *      hnode:      Node allocated with node_allocate(), or DSP_HGPPNODE.
+ *  Returns:
+ *      Node info:  priority, device owner, no. of streams, execution state
+ *                  NDB properties.
+ *  Requires:
+ *      Valid hnode.
+ *  Ensures:
+ */
+extern void get_node_info(struct node_object *hnode,
+			  struct dsp_nodeinfo *node_info);
+
+/*
+ *  ======== node_get_load_type ========
+ *  Purpose:
+ *      Get the load type (dynamic, overlay, static) of a node.
+ *  Parameters:
+ *      hnode:      Node allocated with node_allocate(), or DSP_HGPPNODE.
+ *  Returns:
+ *      Node type:  NLDR_DYNAMICLOAD, NLDR_OVLYLOAD, NLDR_STATICLOAD
+ *  Requires:
+ *      Valid hnode.
+ *  Ensures:
+ */
+extern enum nldr_loadtype node_get_load_type(struct node_object *hnode);
+
+#endif /* NODEPRIV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/ntfy.h b/drivers/staging/tidspbridge/include/dspbridge/ntfy.h
new file mode 100644
index 00000000000..cbc8819c61c
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/ntfy.h
@@ -0,0 +1,217 @@
+/*
+ * ntfy.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Manage lists of notification events.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef NTFY_
+#define NTFY_
+
+#include <dspbridge/host_os.h>
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/sync.h>
+
+/**
+ * ntfy_object - head structure to nofify dspbridge events
+ * @head:	List of notify objects
+ * @ntfy_lock:	lock for list access.
+ *
+ */
+struct ntfy_object {
+	struct raw_notifier_head head;/* List of notifier objects */
+	spinlock_t ntfy_lock;	/* For critical sections */
+};
+
+/**
+ * ntfy_event - structure store specify event to be notified
+ * @noti_block:	List of notify objects
+ * @event:	event that it respond
+ * @type: 	event type (only DSP_SIGNALEVENT supported)
+ * @sync_obj:	sync_event used to set the event
+ *
+ */
+struct ntfy_event {
+	struct notifier_block noti_block;
+	u32 event;	/* Events to be notified about */
+	u32 type;	/* Type of notification to be sent */
+	struct sync_object sync_obj;
+};
+
+
+/**
+ * dsp_notifier_event() - callback function to nofity events
+ * @this:		pointer to itself struct notifier_block
+ * @event:	event to be notified.
+ * @data:		Currently not used.
+ *
+ */
+int dsp_notifier_event(struct notifier_block *this, unsigned long event,
+			   void *data);
+
+/**
+ * ntfy_init() - Set the initial state of the ntfy_object structure.
+ * @no:		pointer to ntfy_object structure.
+ *
+ * This function sets the initial state of the ntfy_object in order it
+ * can be used by the other ntfy functions.
+ */
+
+static inline void ntfy_init(struct ntfy_object *no)
+{
+	spin_lock_init(&no->ntfy_lock);
+	RAW_INIT_NOTIFIER_HEAD(&no->head);
+}
+
+/**
+ * ntfy_delete() - delete list of nofy events registered.
+ * @ntfy_obj:	Pointer to the ntfy object structure.
+ *
+ * This function is used to remove all the notify events  registered.
+ * unregister function is not needed in this function, to unregister
+ * a ntfy_event please look at ntfy_register function.
+ *
+ */
+static inline void ntfy_delete(struct ntfy_object *ntfy_obj)
+{
+	struct ntfy_event *ne;
+	struct notifier_block *nb;
+
+	spin_lock_bh(&ntfy_obj->ntfy_lock);
+	nb = ntfy_obj->head.head;
+	while (nb) {
+		ne = container_of(nb, struct ntfy_event, noti_block);
+		nb = nb->next;
+		kfree(ne);
+	}
+	spin_unlock_bh(&ntfy_obj->ntfy_lock);
+}
+
+/**
+ * ntfy_notify() - nofity all event register for an specific event.
+ * @ntfy_obj:	Pointer to the ntfy_object structure.
+ * @event:	event to be notified.
+ *
+ * This function traverses all the ntfy events registers and
+ * set the event with mach with @event.
+ */
+static inline void ntfy_notify(struct ntfy_object *ntfy_obj, u32 event)
+{
+	spin_lock_bh(&ntfy_obj->ntfy_lock);
+	raw_notifier_call_chain(&ntfy_obj->head, event, NULL);
+	spin_unlock_bh(&ntfy_obj->ntfy_lock);
+}
+
+
+
+/**
+ * ntfy_init() - Create and initialize a ntfy_event structure.
+ * @event:	event that the ntfy event will respond
+ * @type		event type (only DSP_SIGNALEVENT supported)
+ *
+ * This function create a ntfy_event element and sets the event it will
+ * respond the ntfy_event in order it can be used by the other ntfy functions.
+ * In case of success it will return a pointer to the ntfy_event struct
+ * created. Otherwise it will return NULL;
+ */
+
+static inline struct ntfy_event *ntfy_event_create(u32 event, u32 type)
+{
+	struct ntfy_event *ne;
+	ne = kmalloc(sizeof(struct ntfy_event), GFP_KERNEL);
+	if (ne) {
+		sync_init_event(&ne->sync_obj);
+		ne->noti_block.notifier_call = dsp_notifier_event;
+		ne->event = event;
+		ne->type = type;
+	}
+	return ne;
+}
+
+/**
+ * ntfy_register() - register new ntfy_event into a given ntfy_object
+ * @ntfy_obj:	Pointer to the ntfy_object structure.
+ * @noti:		Pointer to the handle to be returned to the user space.
+ * @event	event that the ntfy event will respond
+ * @type		event type (only DSP_SIGNALEVENT supported)
+ *
+ * This function register a new ntfy_event into the ntfy_object list,
+ * which will respond to the @event passed.
+ * This function will return 0 in case of error.
+ * -EFAULT in case of bad pointers and
+ * DSP_EMemory in case of no memory to create ntfy_event.
+ */
+static  inline int ntfy_register(struct ntfy_object *ntfy_obj,
+			 struct dsp_notification *noti,
+			 u32 event, u32 type)
+{
+	struct ntfy_event *ne;
+	int status = 0;
+
+	if (!noti || !ntfy_obj) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	if (!event) {
+		status = -EINVAL;
+		goto func_end;
+	}
+	ne = ntfy_event_create(event, type);
+	if (!ne) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	noti->handle = &ne->sync_obj;
+
+	spin_lock_bh(&ntfy_obj->ntfy_lock);
+	raw_notifier_chain_register(&ntfy_obj->head, &ne->noti_block);
+	spin_unlock_bh(&ntfy_obj->ntfy_lock);
+func_end:
+	return status;
+}
+
+/**
+ * ntfy_unregister() - unregister a ntfy_event from a given ntfy_object
+ * @ntfy_obj:	Pointer to the ntfy_object structure.
+ * @noti:		Pointer to the event that will be removed.
+ *
+ * This function unregister a ntfy_event from the ntfy_object list,
+ * @noti contains the event which is wanted to be removed.
+ * This function will return 0 in case of error.
+ * -EFAULT in case of bad pointers and
+ * DSP_EMemory in case of no memory to create ntfy_event.
+ */
+static  inline int ntfy_unregister(struct ntfy_object *ntfy_obj,
+			 struct dsp_notification *noti)
+{
+	int status = 0;
+	struct ntfy_event *ne;
+
+	if (!noti || !ntfy_obj) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	ne = container_of((struct sync_object *)noti, struct ntfy_event,
+								sync_obj);
+	spin_lock_bh(&ntfy_obj->ntfy_lock);
+	raw_notifier_chain_unregister(&ntfy_obj->head,
+						&ne->noti_block);
+	kfree(ne);
+	spin_unlock_bh(&ntfy_obj->ntfy_lock);
+func_end:
+	return status;
+}
+
+#endif				/* NTFY_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/proc.h b/drivers/staging/tidspbridge/include/dspbridge/proc.h
new file mode 100644
index 00000000000..5e09fd165d9
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/proc.h
@@ -0,0 +1,621 @@
+/*
+ * proc.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This is the DSP API RM module interface.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef PROC_
+#define PROC_
+
+#include <dspbridge/cfgdefs.h>
+#include <dspbridge/devdefs.h>
+#include <dspbridge/drv.h>
+
+extern char *iva_img;
+
+/*
+ *  ======== proc_attach ========
+ *  Purpose:
+ *      Prepare for communication with a particular DSP processor, and return
+ *      a handle to the processor object. The PROC Object gets created
+ *  Parameters:
+ *      processor_id  :	   The processor index (zero-based).
+ *      hmgr_obj  :	   Handle to the Manager Object
+ *      attr_in     :	   Ptr to the dsp_processorattrin structure.
+ *			      A NULL value means use default values.
+ *      ph_processor :	   Ptr to location to store processor handle.
+ *  Returns:
+ *      0     :	   Success.
+ *      -EPERM   :	   General failure.
+ *      -EFAULT :	   Invalid processor handle.
+ *      0:   Success; Processor already attached.
+ *  Requires:
+ *      ph_processor != NULL.
+ *      PROC Initialized.
+ *  Ensures:
+ *      -EPERM, and *ph_processor == NULL, OR
+ *      Success and *ph_processor is a Valid Processor handle OR
+ *      0 and *ph_processor is a Valid Processor.
+ *  Details:
+ *      When attr_in is NULL, the default timeout value is 10 seconds.
+ */
+extern int proc_attach(u32 processor_id,
+			      const struct dsp_processorattrin
+			      *attr_in, void **ph_processor,
+			      struct process_context *pr_ctxt);
+
+/*
+ *  ======== proc_auto_start =========
+ *  Purpose:
+ *      A Particular device gets loaded with the default image
+ *      if the AutoStart flag is set.
+ *  Parameters:
+ *      hdev_obj  :   Handle to the Device
+ *  Returns:
+ *      0     :   On Successful Loading
+ *      -ENOENT   :   No DSP exec file found.
+ *      -EPERM   :   General Failure
+ *  Requires:
+ *      hdev_obj != NULL.
+ *      dev_node_obj != NULL.
+ *      PROC Initialized.
+ *  Ensures:
+ */
+extern int proc_auto_start(struct cfg_devnode *dev_node_obj,
+				  struct dev_object *hdev_obj);
+
+/*
+ *  ======== proc_ctrl ========
+ *  Purpose:
+ *      Pass control information to the GPP device driver managing the DSP
+ *      processor. This will be an OEM-only function, and not part of the
+ *      'Bridge application developer's API.
+ *  Parameters:
+ *      hprocessor  :       The processor handle.
+ *      dw_cmd       :       Private driver IOCTL cmd ID.
+ *      pargs       :       Ptr to an driver defined argument structure.
+ *  Returns:
+ *      0     :       SUCCESS
+ *      -EFAULT :       Invalid processor handle.
+ *      -ETIME:       A Timeout Occured before the Control information
+ *			  could be sent.
+ *      -EPERM   :       General Failure.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures
+ *  Details:
+ *      This function Calls bridge_dev_ctrl.
+ */
+extern int proc_ctrl(void *hprocessor,
+			    u32 dw_cmd, struct dsp_cbdata *arg);
+
+/*
+ *  ======== proc_detach ========
+ *  Purpose:
+ *      Close a DSP processor and de-allocate all (GPP) resources reserved
+ *      for it. The Processor Object is deleted.
+ *  Parameters:
+ *      pr_ctxt     :   The processor handle.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   InValid Handle.
+ *      -EPERM   :   General failure.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures:
+ *      PROC Object is destroyed.
+ */
+extern int proc_detach(struct process_context *pr_ctxt);
+
+/*
+ *  ======== proc_enum_nodes ========
+ *  Purpose:
+ *      Enumerate the nodes currently allocated on a processor.
+ *  Parameters:
+ *      hprocessor  :   The processor handle.
+ *      node_tab    :   The first Location of an array allocated for node
+ *		      handles.
+ *      node_tab_size:   The number of (DSP_HNODE) handles that can be held
+ *		      to the memory the client has allocated for node_tab
+ *      pu_num_nodes  :   Location where DSPProcessor_EnumNodes will return
+ *		      the number of valid handles written to node_tab
+ *      pu_allocated :   Location where DSPProcessor_EnumNodes will return
+ *		      the number of nodes that are allocated on the DSP.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EINVAL   :   The amount of memory allocated for node_tab is
+ *		      insufficent. That is the number of nodes actually
+ *		      allocated on the DSP is greater than the value
+ *		      specified for node_tab_size.
+ *      -EPERM   :   Unable to get Resource Information.
+ *  Details:
+ *  Requires
+ *      pu_num_nodes is not NULL.
+ *      pu_allocated is not NULL.
+ *      node_tab is not NULL.
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_enum_nodes(void *hprocessor,
+				  void **node_tab,
+				  u32 node_tab_size,
+				  u32 *pu_num_nodes,
+				  u32 *pu_allocated);
+
+/*
+ *  ======== proc_get_resource_info ========
+ *  Purpose:
+ *      Enumerate the resources currently available on a processor.
+ *  Parameters:
+ *      hprocessor  :       The processor handle.
+ *      resource_type:      Type of resource .
+ *      resource_info:      Ptr to the dsp_resourceinfo structure.
+ *      resource_info_size:  Size of the structure.
+ *  Returns:
+ *      0     :       Success.
+ *      -EFAULT :       Invalid processor handle.
+ *      -EBADR:    The processor is not in the PROC_RUNNING state.
+ *      -ETIME:       A timeout occured before the DSP responded to the
+ *			  querry.
+ *      -EPERM   :       Unable to get Resource Information
+ *  Requires:
+ *      resource_info is not NULL.
+ *      Parameter resource_type is Valid.[TBD]
+ *      resource_info_size is >= sizeof dsp_resourceinfo struct.
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ *      This function currently returns
+ *      -ENOSYS, and does not write any data to the resource_info struct.
+ */
+extern int proc_get_resource_info(void *hprocessor,
+					 u32 resource_type,
+					 struct dsp_resourceinfo
+					 *resource_info,
+					 u32 resource_info_size);
+
+/*
+ *  ======== proc_exit ========
+ *  Purpose:
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      PROC is initialized.
+ *  Ensures:
+ *      When reference count == 0, PROC's private resources are freed.
+ */
+extern void proc_exit(void);
+
+/*
+ * ======== proc_get_dev_object =========
+ *  Purpose:
+ *      Returns the DEV Hanlde for a given Processor handle
+ *  Parameters:
+ *      hprocessor  :   Processor Handle
+ *      device_obj :    Location to store the DEV Handle.
+ *  Returns:
+ *      0     :   Success; *device_obj has Dev handle
+ *      -EPERM   :   Failure; *device_obj is zero.
+ *  Requires:
+ *      device_obj is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *      0     :   *device_obj is not NULL
+ *      -EPERM   :   *device_obj is NULL.
+ */
+extern int proc_get_dev_object(void *hprocessor,
+				      struct dev_object **device_obj);
+
+/*
+ *  ======== proc_init ========
+ *  Purpose:
+ *      Initialize PROC's private state, keeping a reference count on each
+ *      call.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialized; FALSE if error occured.
+ *  Requires:
+ *  Ensures:
+ *      TRUE: A requirement for the other public PROC functions.
+ */
+extern bool proc_init(void);
+
+/*
+ *  ======== proc_get_state ========
+ *  Purpose:
+ *      Report the state of the specified DSP processor.
+ *  Parameters:
+ *      hprocessor  :   The processor handle.
+ *      proc_state_obj :   Ptr to location to store the dsp_processorstate
+ *		      structure.
+ *      state_info_size: Size of dsp_processorstate.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EPERM   :   General failure while querying processor state.
+ *  Requires:
+ *      proc_state_obj is not NULL
+ *      state_info_size is >= than the size of dsp_processorstate structure.
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_get_state(void *hprocessor, struct dsp_processorstate
+				 *proc_state_obj, u32 state_info_size);
+
+/*
+ *  ======== PROC_GetProcessorID ========
+ *  Purpose:
+ *      Report the state of the specified DSP processor.
+ *  Parameters:
+ *      hprocessor  :   The processor handle.
+ *      proc_id      :   Processor ID
+ *
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EPERM   :   General failure while querying processor state.
+ *  Requires:
+ *      proc_state_obj is not NULL
+ *      state_info_size is >= than the size of dsp_processorstate structure.
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_get_processor_id(void *proc, u32 * proc_id);
+
+/*
+ *  ======== proc_get_trace ========
+ *  Purpose:
+ *      Retrieve the trace buffer from the specified DSP processor.
+ *  Parameters:
+ *      hprocessor  :   The processor handle.
+ *      pbuf	:   Ptr to buffer to hold trace output.
+ *      max_size    :   Maximum size of the output buffer.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EPERM   :   General failure while retireving processor trace
+ *		      Buffer.
+ *  Requires:
+ *      pbuf is not NULL
+ *      max_size is > 0.
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_get_trace(void *hprocessor, u8 * pbuf, u32 max_size);
+
+/*
+ *  ======== proc_load ========
+ *  Purpose:
+ *      Reset a processor and load a new base program image.
+ *      This will be an OEM-only function.
+ *  Parameters:
+ *      hprocessor:       The processor handle.
+ *      argc_index:       The number of Arguments(strings)in the aArgV[]
+ *      user_args:       An Array of Arguments(Unicode Strings)
+ *      user_envp:       An Array of Environment settings(Unicode Strings)
+ *  Returns:
+ *      0:       Success.
+ *      -ENOENT:       The DSP Execuetable was not found.
+ *      -EFAULT:       Invalid processor handle.
+ *      -EPERM   :       Unable to Load the Processor
+ *  Requires:
+ *      user_args is not NULL
+ *      argc_index is > 0
+ *      PROC Initialized.
+ *  Ensures:
+ *      Success and ProcState == PROC_LOADED
+ *      or DSP_FAILED status.
+ *  Details:
+ *      Does not implement access rights to control which GPP application
+ *      can load the processor.
+ */
+extern int proc_load(void *hprocessor,
+			    const s32 argc_index, const char **user_args,
+			    const char **user_envp);
+
+/*
+ *  ======== proc_register_notify ========
+ *  Purpose:
+ *      Register to be notified of specific processor events
+ *  Parameters:
+ *      hprocessor  :   The processor handle.
+ *      event_mask  :   Mask of types of events to be notified about.
+ *      notify_type :   Type of notification to be sent.
+ *      hnotification:  Handle to be used for notification.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle or hnotification.
+ *      -EINVAL  :   Parameter event_mask is Invalid
+ *      DSP_ENOTIMP :   The notification type specified in uNotifyMask
+ *		      is not supported.
+ *      -EPERM   :   Unable to register for notification.
+ *  Requires:
+ *      hnotification is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_register_notify(void *hprocessor,
+				       u32 event_mask, u32 notify_type,
+				       struct dsp_notification
+				       *hnotification);
+
+/*
+ *  ======== proc_notify_clients ========
+ *  Purpose:
+ *      Notify the Processor Clients
+ *  Parameters:
+ *      proc       :   The processor handle.
+ *      events     :   Event to be notified about.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EPERM   :   Failure to Set or Reset the Event
+ *  Requires:
+ *      events is Supported or Valid type of Event
+ *      proc is a valid handle
+ *      PROC Initialized.
+ *  Ensures:
+ */
+extern int proc_notify_clients(void *proc, u32 events);
+
+/*
+ *  ======== proc_notify_all_clients ========
+ *  Purpose:
+ *      Notify the Processor Clients
+ *  Parameters:
+ *      proc       :   The processor handle.
+ *      events     :   Event to be notified about.
+ *  Returns:
+ *      0     :   Success.
+ *      -EFAULT :   Invalid processor handle.
+ *      -EPERM   :   Failure to Set or Reset the Event
+ *  Requires:
+ *      events is Supported or Valid type of Event
+ *      proc is a valid handle
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ *      NODE And STRM would use this function to notify their clients
+ *      about the state changes in NODE or STRM.
+ */
+extern int proc_notify_all_clients(void *proc, u32 events);
+
+/*
+ *  ======== proc_start ========
+ *  Purpose:
+ *      Start a processor running.
+ *      Processor must be in PROC_LOADED state.
+ *      This will be an OEM-only function, and not part of the 'Bridge
+ *      application developer's API.
+ *  Parameters:
+ *      hprocessor  :       The processor handle.
+ *  Returns:
+ *      0     :       Success.
+ *      -EFAULT :       Invalid processor handle.
+ *      -EBADR:    Processor is not in PROC_LOADED state.
+ *      -EPERM   :       Unable to start the processor.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures:
+ *      Success and ProcState == PROC_RUNNING or DSP_FAILED status.
+ *  Details:
+ */
+extern int proc_start(void *hprocessor);
+
+/*
+ *  ======== proc_stop ========
+ *  Purpose:
+ *      Start a processor running.
+ *      Processor must be in PROC_LOADED state.
+ *      This will be an OEM-only function, and not part of the 'Bridge
+ *      application developer's API.
+ *  Parameters:
+ *      hprocessor  :       The processor handle.
+ *  Returns:
+ *      0     :       Success.
+ *      -EFAULT :       Invalid processor handle.
+ *      -EBADR:    Processor is not in PROC_LOADED state.
+ *      -EPERM   :       Unable to start the processor.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures:
+ *      Success and ProcState == PROC_RUNNING or DSP_FAILED status.
+ *  Details:
+ */
+extern int proc_stop(void *hprocessor);
+
+/*
+ *  ======== proc_end_dma ========
+ *  Purpose:
+ *      Begin a DMA transfer
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      pmpu_addr	:   Buffer start address
+ *      ul_size		:   Buffer size
+ *      dir		:   The direction of the transfer
+ *  Requires:
+ *      Memory was previously mapped.
+ */
+extern int proc_end_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+						enum dma_data_direction dir);
+/*
+ *  ======== proc_begin_dma ========
+ *  Purpose:
+ *      Begin a DMA transfer
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      pmpu_addr	:   Buffer start address
+ *      ul_size		:   Buffer size
+ *      dir		:   The direction of the transfer
+ *  Requires:
+ *      Memory was previously mapped.
+ */
+extern int proc_begin_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+						enum dma_data_direction dir);
+
+/*
+ *  ======== proc_flush_memory ========
+ *  Purpose:
+ *      Flushes a buffer from the MPU data cache.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      pmpu_addr	:   Buffer start address
+ *      ul_size	  :   Buffer size
+ *      ul_flags	 :   Reserved.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ *      All the arguments are currently ignored.
+ */
+extern int proc_flush_memory(void *hprocessor,
+				    void *pmpu_addr, u32 ul_size, u32 ul_flags);
+
+/*
+ *  ======== proc_invalidate_memory ========
+ *  Purpose:
+ *      Invalidates a buffer from the MPU data cache.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      pmpu_addr	:   Buffer start address
+ *      ul_size	  :   Buffer size
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *  Requires:
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ *      All the arguments are currently ignored.
+ */
+extern int proc_invalidate_memory(void *hprocessor,
+					 void *pmpu_addr, u32 ul_size);
+
+/*
+ *  ======== proc_map ========
+ *  Purpose:
+ *      Maps a MPU buffer to DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      pmpu_addr	:   Starting address of the memory region to map.
+ *      ul_size	  :   Size of the memory region to map.
+ *      req_addr	:   Requested DSP start address. Offset-adjusted actual
+ *			  mapped address is in the last argument.
+ *      pp_map_addr       :   Ptr to DSP side mapped u8 address.
+ *      ul_map_attr       :   Optional endianness attributes, virt to phys flag.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOMEM     :   MPU side memory allocation error.
+ *      -ENOENT   :   Cannot find a reserved region starting with this
+ *		      :   address.
+ *  Requires:
+ *      pmpu_addr is not NULL
+ *      ul_size is not zero
+ *      pp_map_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_map(void *hprocessor,
+			   void *pmpu_addr,
+			   u32 ul_size,
+			   void *req_addr,
+			   void **pp_map_addr, u32 ul_map_attr,
+			   struct process_context *pr_ctxt);
+
+/*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      ul_size	  :   Size of the address space to reserve.
+ *      pp_rsv_addr       :   Ptr to DSP side reserved u8 address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOMEM     :   Cannot reserve chunk of this size.
+ *  Requires:
+ *      pp_rsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_reserve_memory(void *hprocessor,
+				      u32 ul_size, void **pp_rsv_addr,
+				      struct process_context *pr_ctxt);
+
+/*
+ *  ======== proc_un_map ========
+ *  Purpose:
+ *      Removes a MPU buffer mapping from the DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      map_addr	:   Starting address of the mapped memory region.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOENT   :   Cannot find a mapped region starting with this
+ *		      :   address.
+ *  Requires:
+ *      map_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_un_map(void *hprocessor, void *map_addr,
+			      struct process_context *pr_ctxt);
+
+/*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      prsv_addr	:   Ptr to DSP side reservedBYTE address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOENT   :   Cannot find a reserved region starting with this
+ *		      :   address.
+ *  Requires:
+ *      prsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_un_reserve_memory(void *hprocessor,
+					 void *prsv_addr,
+					 struct process_context *pr_ctxt);
+
+#endif /* PROC_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/procpriv.h b/drivers/staging/tidspbridge/include/dspbridge/procpriv.h
new file mode 100644
index 00000000000..77d1f0ef95c
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/procpriv.h
@@ -0,0 +1,25 @@
+/*
+ * procpriv.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global PROC constants and types, shared by PROC, MGR and DSP API.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef PROCPRIV_
+#define PROCPRIV_
+
+/* RM PROC Object */
+struct proc_object;
+
+#endif /* PROCPRIV_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/pwr.h b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
new file mode 100644
index 00000000000..a6dc783904e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
@@ -0,0 +1,107 @@
+/*
+ * pwr.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef PWR_
+#define PWR_
+
+#include <dspbridge/dbdefs.h>
+#include <dspbridge/pwr_sh.h>
+
+/*
+ *  ======== pwr_sleep_dsp ========
+ *      Signal the DSP to go to sleep.
+ *
+ *  Parameters:
+ *      sleep_code:          New sleep state for DSP.  (Initially, valid codes
+ *                          are PWR_DEEPSLEEP or PWR_EMERGENCYDEEPSLEEP; both of
+ *                          these codes will simply put the DSP in deep sleep.)
+ *
+ *	timeout:            Maximum time (msec) that PWR should wait for
+ *                          confirmation that the DSP sleep state has been
+ *                          reached.  If PWR should simply send the command to
+ *                          the DSP to go to sleep and then return (i.e.,
+ *                          asynchrounous sleep), the timeout should be
+ *                          specified as zero.
+ *
+ *  Returns:
+ *      0:            Success.
+ *      0: Success, but the DSP was already asleep.
+ *      -EINVAL:    The specified sleep_code is not supported.
+ *      -ETIME:       A timeout occured while waiting for DSP sleep
+ *                          confirmation.
+ *      -EPERM:          General failure, unable to send sleep command to
+ *                          the DSP.
+ */
+extern int pwr_sleep_dsp(const u32 sleep_code, const u32 timeout);
+
+/*
+ *  ======== pwr_wake_dsp ========
+ *    Signal the DSP to wake from sleep.
+ *
+ *  Parameters:
+ *	timeout:            Maximum time (msec) that PWR should wait for
+ *                          confirmation that the DSP is awake.  If PWR should
+ *                          simply send a command to the DSP to wake and then
+ *                          return (i.e., asynchrounous wake), timeout should
+ *                          be specified as zero.
+ *
+ *  Returns:
+ *      0:            Success.
+ *      0:  Success, but the DSP was already awake.
+ *      -ETIME:       A timeout occured while waiting for wake
+ *                          confirmation.
+ *      -EPERM:          General failure, unable to send wake command to
+ *                          the DSP.
+ */
+extern int pwr_wake_dsp(const u32 timeout);
+
+/*
+ *  ======== pwr_pm_pre_scale ========
+ *    Prescale notification to DSP.
+ *
+ *  Parameters:
+ *	voltage_domain:   The voltage domain for which notification is sent
+ *    level:			The level of voltage domain
+ *
+ *  Returns:
+ *      0:            Success.
+ *      0:  Success, but the DSP was already awake.
+ *      -ETIME:       A timeout occured while waiting for wake
+ *                          confirmation.
+ *      -EPERM:          General failure, unable to send wake command to
+ *                          the DSP.
+ */
+extern int pwr_pm_pre_scale(u16 voltage_domain, u32 level);
+
+/*
+ *  ======== pwr_pm_post_scale ========
+ *    PostScale notification to DSP.
+ *
+ *  Parameters:
+ *	voltage_domain:   The voltage domain for which notification is sent
+ *    level:			The level of voltage domain
+ *
+ *  Returns:
+ *      0:            Success.
+ *      0:  Success, but the DSP was already awake.
+ *      -ETIME:       A timeout occured while waiting for wake
+ *                          confirmation.
+ *      -EPERM:          General failure, unable to send wake command to
+ *                          the DSP.
+ */
+extern int pwr_pm_post_scale(u16 voltage_domain, u32 level);
+
+#endif /* PWR_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/pwr_sh.h b/drivers/staging/tidspbridge/include/dspbridge/pwr_sh.h
new file mode 100644
index 00000000000..1b4a090abe7
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/pwr_sh.h
@@ -0,0 +1,33 @@
+/*
+ * pwr_sh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Power Manager shared definitions (used on both GPP and DSP sides).
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef PWR_SH_
+#define PWR_SH_
+
+#include <dspbridge/mbx_sh.h>
+
+/* valid sleep command codes that can be sent by GPP via mailbox: */
+#define PWR_DEEPSLEEP           MBX_PM_DSPIDLE
+#define PWR_EMERGENCYDEEPSLEEP  MBX_PM_EMERGENCYSLEEP
+#define PWR_SLEEPUNTILRESTART   MBX_PM_SLEEPUNTILRESTART
+#define PWR_WAKEUP              MBX_PM_DSPWAKEUP
+#define PWR_AUTOENABLE          MBX_PM_PWRENABLE
+#define PWR_AUTODISABLE         MBX_PM_PWRDISABLE
+#define PWR_RETENTION             MBX_PM_DSPRETN
+
+#endif /* PWR_SH_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/resourcecleanup.h b/drivers/staging/tidspbridge/include/dspbridge/resourcecleanup.h
new file mode 100644
index 00000000000..dfaf0c6c06f
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/resourcecleanup.h
@@ -0,0 +1,52 @@
+/*
+ * resourcecleanup.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <dspbridge/nodepriv.h>
+#include <dspbridge/drv.h>
+
+extern int drv_get_proc_ctxt_list(struct process_context **pctxt,
+					 struct drv_object *hdrv_obj);
+
+extern int drv_insert_proc_context(struct drv_object *driver_obj,
+					  void *process_ctxt);
+
+extern int drv_remove_all_dmm_res_elements(void *process_ctxt);
+
+extern int drv_remove_all_node_res_elements(void *process_ctxt);
+
+extern int drv_proc_set_pid(void *ctxt, s32 process);
+
+extern int drv_remove_all_resources(void *process_ctxt);
+
+extern int drv_remove_proc_context(struct drv_object *driver_obj,
+					  void *pr_ctxt);
+
+extern int drv_insert_node_res_element(void *hnode, void *node_resource,
+					      void *process_ctxt);
+
+extern void drv_proc_node_update_heap_status(void *node_resource, s32 status);
+
+extern void drv_proc_node_update_status(void *node_resource, s32 status);
+
+extern int drv_proc_update_strm_res(u32 num_bufs, void *strm_resources);
+
+extern int drv_proc_insert_strm_res_element(void *stream_obj,
+						   void *strm_res,
+						   void *process_ctxt);
+
+extern int drv_remove_all_strm_res_elements(void *process_ctxt);
+
+extern enum node_state node_get_state(void *hnode);
diff --git a/drivers/staging/tidspbridge/include/dspbridge/rmm.h b/drivers/staging/tidspbridge/include/dspbridge/rmm.h
new file mode 100644
index 00000000000..baea536681e
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/rmm.h
@@ -0,0 +1,181 @@
+/*
+ * rmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This memory manager provides general heap management and arbitrary
+ * alignment for any number of memory segments, and management of overlay
+ * memory.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef RMM_
+#define RMM_
+
+/*
+ *  ======== rmm_addr ========
+ *  DSP address + segid
+ */
+struct rmm_addr {
+	u32 addr;
+	s32 segid;
+};
+
+/*
+ *  ======== rmm_segment ========
+ *  Memory segment on the DSP available for remote allocations.
+ */
+struct rmm_segment {
+	u32 base;		/* Base of the segment */
+	u32 length;		/* Size of the segment (target MAUs) */
+	s32 space;		/* Code or data */
+	u32 number;		/* Number of Allocated Blocks */
+};
+
+/*
+ *  ======== RMM_Target ========
+ */
+struct rmm_target_obj;
+
+/*
+ *  ======== rmm_alloc ========
+ *
+ *  rmm_alloc is used to remotely allocate or reserve memory on the DSP.
+ *
+ *  Parameters:
+ *      target          - Target returned from rmm_create().
+ *      segid           - Memory segment to allocate from.
+ *      size            - Size (target MAUS) to allocate.
+ *      align           - alignment.
+ *      dsp_address     - If reserve is FALSE, the location to store allocated
+ *                        address on output, otherwise, the DSP address to
+ *                        reserve.
+ *      reserve         - If TRUE, reserve the memory specified by dsp_address.
+ *  Returns:
+ *      0:                Success.
+ *      -ENOMEM:            Memory allocation on GPP failed.
+ *      -ENXIO:     Cannot "allocate" overlay memory because it's
+ *                              already in use.
+ *  Requires:
+ *      RMM initialized.
+ *      Valid target.
+ *      dsp_address != NULL.
+ *      size > 0
+ *      reserve || target->num_segs > 0.
+ *  Ensures:
+ */
+extern int rmm_alloc(struct rmm_target_obj *target, u32 segid, u32 size,
+			u32 align, u32 *dsp_address, bool reserve);
+
+/*
+ *  ======== rmm_create ========
+ *  Create a target object with memory segments for remote allocation. If
+ *  seg_tab == NULL or num_segs == 0, memory can only be reserved through
+ *  rmm_alloc().
+ *
+ *  Parameters:
+ *      target_obj:        - Location to store target on output.
+ *      seg_tab:         - Table of memory segments.
+ *      num_segs:        - Number of memory segments.
+ *  Returns:
+ *      0:        Success.
+ *      -ENOMEM:    Memory allocation failed.
+ *  Requires:
+ *      RMM initialized.
+ *      target_obj != NULL.
+ *      num_segs == 0 || seg_tab != NULL.
+ *  Ensures:
+ *      Success:        Valid *target_obj.
+ *      Failure:        *target_obj == NULL.
+ */
+extern int rmm_create(struct rmm_target_obj **target_obj,
+			     struct rmm_segment seg_tab[], u32 num_segs);
+
+/*
+ *  ======== rmm_delete ========
+ *  Delete target allocated in rmm_create().
+ *
+ *  Parameters:
+ *      target          - Target returned from rmm_create().
+ *  Returns:
+ *  Requires:
+ *      RMM initialized.
+ *      Valid target.
+ *  Ensures:
+ */
+extern void rmm_delete(struct rmm_target_obj *target);
+
+/*
+ *  ======== rmm_exit ========
+ *  Exit the RMM module
+ *
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      rmm_init successfully called.
+ *  Ensures:
+ */
+extern void rmm_exit(void);
+
+/*
+ *  ======== rmm_free ========
+ *  Free or unreserve memory allocated through rmm_alloc().
+ *
+ *  Parameters:
+ *      target:         - Target returned from rmm_create().
+ *      segid:          - Segment of memory to free.
+ *      dsp_address:    - Address to free or unreserve.
+ *      size:           - Size of memory to free or unreserve.
+ *      reserved:       - TRUE if memory was reserved only, otherwise FALSE.
+ *  Returns:
+ *  Requires:
+ *      RMM initialized.
+ *      Valid target.
+ *      reserved || segid < target->num_segs.
+ *      reserve || [dsp_address, dsp_address + size] is a valid memory range.
+ *  Ensures:
+ */
+extern bool rmm_free(struct rmm_target_obj *target, u32 segid, u32 dsp_addr,
+		     u32 size, bool reserved);
+
+/*
+ *  ======== rmm_init ========
+ *  Initialize the RMM module
+ *
+ *  Parameters:
+ *  Returns:
+ *      TRUE:   Success.
+ *      FALSE:  Failure.
+ *  Requires:
+ *  Ensures:
+ */
+extern bool rmm_init(void);
+
+/*
+ *  ======== rmm_stat ========
+ *  Obtain  memory segment status
+ *
+ *  Parameters:
+ *      segid:       Segment ID of the dynamic loading segment.
+ *      mem_stat_buf: Pointer to allocated buffer into which memory stats are
+ *                   placed.
+ *  Returns:
+ *      TRUE:   Success.
+ *      FALSE:  Failure.
+ *  Requires:
+ *      segid < target->num_segs
+ *  Ensures:
+ */
+extern bool rmm_stat(struct rmm_target_obj *target, enum dsp_memtype segid,
+		     struct dsp_memstat *mem_stat_buf);
+
+#endif /* RMM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/rms_sh.h b/drivers/staging/tidspbridge/include/dspbridge/rms_sh.h
new file mode 100644
index 00000000000..7bc5574342a
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/rms_sh.h
@@ -0,0 +1,95 @@
+/*
+ * rms_sh.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Resource Manager Server shared definitions (used on both
+ * GPP and DSP sides).
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef RMS_SH_
+#define RMS_SH_
+
+#include <dspbridge/rmstypes.h>
+
+/* Node Types: */
+#define RMS_TASK                1	/* Task node */
+#define RMS_DAIS                2	/* xDAIS socket node */
+#define RMS_MSG                 3	/* Message node */
+
+/* Memory Types: */
+#define RMS_CODE                0	/* Program space */
+#define RMS_DATA                1	/* Data space */
+#define RMS_IO                	2	/* I/O space */
+
+/* RM Server Command and Response Buffer Sizes: */
+#define RMS_COMMANDBUFSIZE     256	/* Size of command buffer */
+#define RMS_RESPONSEBUFSIZE    16	/* Size of response buffer */
+
+/* Pre-Defined Command/Response Codes: */
+#define RMS_EXIT                0x80000000	/* GPP->Node: shutdown */
+#define RMS_EXITACK             0x40000000	/* Node->GPP: ack shutdown */
+#define RMS_BUFDESC             0x20000000	/* Arg1 SM buf, Arg2 SM size */
+#define RMS_KILLTASK            0x10000000	/* GPP->Node: Kill Task */
+#define RMS_USER                0x0	/* Start of user-defined msg codes */
+#define RMS_MAXUSERCODES        0xfff	/* Maximum user defined C/R Codes */
+
+/* RM Server RPC Command Structure: */
+struct rms_command {
+	rms_word fxn;		/* Server function address */
+	rms_word arg1;		/* First argument */
+	rms_word arg2;		/* Second argument */
+	rms_word data;		/* Function-specific data array */
+};
+
+/*
+ *  The rms_strm_def structure defines the parameters for both input and output
+ *  streams, and is passed to a node's create function.
+ */
+struct rms_strm_def {
+	rms_word bufsize;	/* Buffer size (in DSP words) */
+	rms_word nbufs;		/* Max number of bufs in stream */
+	rms_word segid;		/* Segment to allocate buffers */
+	rms_word align;		/* Alignment for allocated buffers */
+	rms_word timeout;	/* Timeout (msec) for blocking calls */
+	char name[1];	/* Device Name (terminated by '\0') */
+};
+
+/* Message node create args structure: */
+struct rms_msg_args {
+	rms_word max_msgs;	/* Max # simultaneous msgs to node */
+	rms_word segid;		/* Mem segment for NODE_allocMsgBuf */
+	rms_word notify_type;	/* Type of message notification */
+	rms_word arg_length;	/* Length (in DSP chars) of arg data */
+	rms_word arg_data;	/* Arg data for node */
+};
+
+/* Partial task create args structure */
+struct rms_more_task_args {
+	rms_word priority;	/* Task's runtime priority level */
+	rms_word stack_size;	/* Task's stack size */
+	rms_word sysstack_size;	/* Task's system stack size (55x) */
+	rms_word stack_seg;	/* Memory segment for task's stack */
+	rms_word heap_addr;	/* base address of the node memory heap in
+				 * external memory (DSP virtual address) */
+	rms_word heap_size;	/* size in MAUs of the node memory heap in
+				 * external memory */
+	rms_word misc;		/* Misc field.  Not used for 'normal'
+				 * task nodes; for xDAIS socket nodes
+				 * specifies the IALG_Fxn pointer.
+				 */
+	/* # input STRM definition structures */
+	rms_word num_input_streams;
+};
+
+#endif /* RMS_SH_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/rmstypes.h b/drivers/staging/tidspbridge/include/dspbridge/rmstypes.h
new file mode 100644
index 00000000000..83c0f1d9619
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/rmstypes.h
@@ -0,0 +1,24 @@
+/*
+ * rmstypes.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Resource Manager Server shared data type definitions.
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef RMSTYPES_
+#define RMSTYPES_
+#include <linux/types.h>
+typedef u32 rms_word;
+
+#endif /* RMSTYPES_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/services.h b/drivers/staging/tidspbridge/include/dspbridge/services.h
new file mode 100644
index 00000000000..eb26c867c93
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/services.h
@@ -0,0 +1,50 @@
+/*
+ * services.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Provide loading and unloading of SERVICES modules.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef SERVICES_
+#define SERVICES_
+
+#include <dspbridge/host_os.h>
+/*
+ *  ======== services_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      SERVICES initialized.
+ *  Ensures:
+ *      Resources used by module are freed when cRef reaches zero.
+ */
+extern void services_exit(void);
+
+/*
+ *  ======== services_init ========
+ *  Purpose:
+ *      Initializes SERVICES modules.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if all modules initialized; otherwise FALSE.
+ *  Requires:
+ *  Ensures:
+ *      SERVICES modules initialized.
+ */
+extern bool services_init(void);
+
+#endif /* SERVICES_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/strm.h b/drivers/staging/tidspbridge/include/dspbridge/strm.h
new file mode 100644
index 00000000000..3e4671e7f91
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/strm.h
@@ -0,0 +1,404 @@
+/*
+ * strm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSPBridge Stream Manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef STRM_
+#define STRM_
+
+#include <dspbridge/dev.h>
+
+#include <dspbridge/strmdefs.h>
+#include <dspbridge/proc.h>
+
+/*
+ *  ======== strm_allocate_buffer ========
+ *  Purpose:
+ *      Allocate data buffer(s) for use with a stream.
+ *  Parameter:
+ *      strmres:     Stream resource info handle returned from strm_open().
+ *      usize:          Size (GPP bytes) of the buffer(s).
+ *      num_bufs:       Number of buffers to allocate.
+ *      ap_buffer:       Array to hold buffer addresses.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -ENOMEM:    Insufficient memory.
+ *      -EPERM:      Failure occurred, unable to allocate buffers.
+ *      -EINVAL:      usize must be > 0 bytes.
+ *  Requires:
+ *      strm_init(void) called.
+ *      ap_buffer != NULL.
+ *  Ensures:
+ */
+extern int strm_allocate_buffer(struct strm_res_object *strmres,
+				       u32 usize,
+				       u8 **ap_buffer,
+				       u32 num_bufs,
+				       struct process_context *pr_ctxt);
+
+/*
+ *  ======== strm_close ========
+ *  Purpose:
+ *      Close a stream opened with strm_open().
+ *  Parameter:
+ *      strmres:          Stream resource info handle returned from strm_open().
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -EPIPE:   Some data buffers issued to the stream have not
+ *                      been reclaimed.
+ *      -EPERM:      Failure to close stream.
+ *  Requires:
+ *      strm_init(void) called.
+ *  Ensures:
+ */
+extern int strm_close(struct strm_res_object *strmres,
+			     struct process_context *pr_ctxt);
+
+/*
+ *  ======== strm_create ========
+ *  Purpose:
+ *      Create a STRM manager object. This object holds information about the
+ *      device needed to open streams.
+ *  Parameters:
+ *      strm_man:       Location to store handle to STRM manager object on
+ *                      output.
+ *      dev_obj:           Device for this processor.
+ *  Returns:
+ *      0:        Success;
+ *      -ENOMEM:    Insufficient memory for requested resources.
+ *      -EPERM:      General failure.
+ *  Requires:
+ *      strm_init(void) called.
+ *      strm_man != NULL.
+ *      dev_obj != NULL.
+ *  Ensures:
+ *      0:        Valid *strm_man.
+ *      error:          *strm_man == NULL.
+ */
+extern int strm_create(struct strm_mgr **strm_man,
+			      struct dev_object *dev_obj);
+
+/*
+ *  ======== strm_delete ========
+ *  Purpose:
+ *      Delete the STRM Object.
+ *  Parameters:
+ *      strm_mgr_obj:       Handle to STRM manager object from strm_create.
+ *  Returns:
+ *  Requires:
+ *      strm_init(void) called.
+ *      Valid strm_mgr_obj.
+ *  Ensures:
+ *      strm_mgr_obj is not valid.
+ */
+extern void strm_delete(struct strm_mgr *strm_mgr_obj);
+
+/*
+ *  ======== strm_exit ========
+ *  Purpose:
+ *      Discontinue usage of STRM module.
+ *  Parameters:
+ *  Returns:
+ *  Requires:
+ *      strm_init(void) successfully called before.
+ *  Ensures:
+ */
+extern void strm_exit(void);
+
+/*
+ *  ======== strm_free_buffer ========
+ *  Purpose:
+ *      Free buffer(s) allocated with strm_allocate_buffer.
+ *  Parameter:
+ *      strmres:     Stream resource info handle returned from strm_open().
+ *      ap_buffer:       Array containing buffer addresses.
+ *      num_bufs:       Number of buffers to be freed.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream handle.
+ *      -EPERM:      Failure occurred, unable to free buffers.
+ *  Requires:
+ *      strm_init(void) called.
+ *      ap_buffer != NULL.
+ *  Ensures:
+ */
+extern int strm_free_buffer(struct strm_res_object *strmres,
+				   u8 **ap_buffer, u32 num_bufs,
+				   struct process_context *pr_ctxt);
+
+/*
+ *  ======== strm_get_event_handle ========
+ *  Purpose:
+ *      Get stream's user event handle. This function is used when closing
+ *      a stream, so the event can be closed.
+ *  Parameter:
+ *      stream_obj:      Stream handle returned from strm_open().
+ *      ph_event:        Location to store event handle on output.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *  Requires:
+ *      strm_init(void) called.
+ *      ph_event != NULL.
+ *  Ensures:
+ */
+extern int strm_get_event_handle(struct strm_object *stream_obj,
+					void **ph_event);
+
+/*
+ *  ======== strm_get_info ========
+ *  Purpose:
+ *      Get information about a stream. User's dsp_streaminfo is contained
+ *      in stream_info struct. stream_info also contains Bridge private info.
+ *  Parameters:
+ *      stream_obj:         Stream handle returned from strm_open().
+ *      stream_info:        Location to store stream info on output.
+ *      uSteamInfoSize:     Size of user's dsp_streaminfo structure.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid stream_obj.
+ *      -EINVAL:          stream_info_size < sizeof(dsp_streaminfo).
+ *      -EPERM:          Unable to get stream info.
+ *  Requires:
+ *      strm_init(void) called.
+ *      stream_info != NULL.
+ *  Ensures:
+ */
+extern int strm_get_info(struct strm_object *stream_obj,
+				struct stream_info *stream_info,
+				u32 stream_info_size);
+
+/*
+ *  ======== strm_idle ========
+ *  Purpose:
+ *      Idle a stream and optionally flush output data buffers.
+ *      If this is an output stream and flush_data is TRUE, all data currently
+ *      enqueued will be discarded.
+ *      If this is an output stream and flush_data is FALSE, this function
+ *      will block until all currently buffered data is output, or the timeout
+ *      specified has been reached.
+ *      After a successful call to strm_idle(), all buffers can immediately
+ *      be reclaimed.
+ *  Parameters:
+ *      stream_obj:     Stream handle returned from strm_open().
+ *      flush_data:     If TRUE, discard output buffers.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -ETIME:   A timeout occurred before the stream could be idled.
+ *      -EPERM:      Unable to idle stream.
+ *  Requires:
+ *      strm_init(void) called.
+ *  Ensures:
+ */
+extern int strm_idle(struct strm_object *stream_obj, bool flush_data);
+
+/*
+ *  ======== strm_init ========
+ *  Purpose:
+ *      Initialize the STRM module.
+ *  Parameters:
+ *  Returns:
+ *      TRUE if initialization succeeded, FALSE otherwise.
+ *  Requires:
+ *  Ensures:
+ */
+extern bool strm_init(void);
+
+/*
+ *  ======== strm_issue ========
+ *  Purpose:
+ *      Send a buffer of data to a stream.
+ *  Parameters:
+ *      stream_obj:         Stream handle returned from strm_open().
+ *      pbuf:               Pointer to buffer of data to be sent to the stream.
+ *      ul_bytes:            Number of bytes of data in the buffer.
+ *      ul_buf_size:          Actual buffer size in bytes.
+ *      dw_arg:              A user argument that travels with the buffer.
+ *  Returns:
+ *      0:            Success.
+ *      -EFAULT:        Invalid stream_obj.
+ *      -ENOSR:    The stream is full.
+ *      -EPERM:          Failure occurred, unable to issue buffer.
+ *  Requires:
+ *      strm_init(void) called.
+ *      pbuf != NULL.
+ *  Ensures:
+ */
+extern int strm_issue(struct strm_object *stream_obj, u8 * pbuf,
+			     u32 ul_bytes, u32 ul_buf_size, u32 dw_arg);
+
+/*
+ *  ======== strm_open ========
+ *  Purpose:
+ *      Open a stream for sending/receiving data buffers to/from a task of
+ *      DAIS socket node on the DSP.
+ *  Parameters:
+ *      hnode:          Node handle returned from node_allocate().
+ *      dir:           DSP_TONODE or DSP_FROMNODE.
+ *      index:         Stream index.
+ *      pattr:          Pointer to structure containing attributes to be
+ *                      applied to stream. Cannot be NULL.
+ *      strmres:     Location to store stream resuorce info handle on output.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hnode.
+ *      -EPERM: Invalid direction.
+ *              hnode is not a task or DAIS socket node.
+ *              Unable to open stream.
+ *      -EINVAL:     Invalid index.
+ *  Requires:
+ *      strm_init(void) called.
+ *      strmres != NULL.
+ *      pattr != NULL.
+ *  Ensures:
+ *      0:        *strmres is valid.
+ *      error:          *strmres == NULL.
+ */
+extern int strm_open(struct node_object *hnode, u32 dir,
+			    u32 index, struct strm_attr *pattr,
+			    struct strm_res_object **strmres,
+			    struct process_context *pr_ctxt);
+
+/*
+ *  ======== strm_prepare_buffer ========
+ *  Purpose:
+ *      Prepare a data buffer not allocated by DSPStream_AllocateBuffers()
+ *      for use with a stream.
+ *  Parameter:
+ *      stream_obj:     Stream handle returned from strm_open().
+ *      usize:          Size (GPP bytes) of the buffer.
+ *      pbuffer:        Buffer address.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -EPERM:      Failure occurred, unable to prepare buffer.
+ *  Requires:
+ *      strm_init(void) called.
+ *      pbuffer != NULL.
+ *  Ensures:
+ */
+extern int strm_prepare_buffer(struct strm_object *stream_obj,
+				      u32 usize, u8 *pbuffer);
+
+/*
+ *  ======== strm_reclaim ========
+ *  Purpose:
+ *      Request a buffer back from a stream.
+ *  Parameters:
+ *      stream_obj:          Stream handle returned from strm_open().
+ *      buf_ptr:        Location to store pointer to reclaimed buffer.
+ *      nbytes:         Location where number of bytes of data in the
+ *                      buffer will be written.
+ *      buff_size:      Location where actual buffer size will be written.
+ *      pdw_arg:         Location where user argument that travels with
+ *                      the buffer will be written.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -ETIME:   A timeout occurred before a buffer could be
+ *                      retrieved.
+ *      -EPERM:      Failure occurred, unable to reclaim buffer.
+ *  Requires:
+ *      strm_init(void) called.
+ *      buf_ptr != NULL.
+ *      nbytes != NULL.
+ *      pdw_arg != NULL.
+ *  Ensures:
+ */
+extern int strm_reclaim(struct strm_object *stream_obj,
+			       u8 **buf_ptr, u32 * nbytes,
+			       u32 *buff_size, u32 *pdw_arg);
+
+/*
+ *  ======== strm_register_notify ========
+ *  Purpose:
+ *      Register to be notified on specific events for this stream.
+ *  Parameters:
+ *      stream_obj:     Stream handle returned by strm_open().
+ *      event_mask:     Mask of types of events to be notified about.
+ *      notify_type:    Type of notification to be sent.
+ *      hnotification:  Handle to be used for notification.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -ENOMEM:    Insufficient memory on GPP.
+ *      -EINVAL:     event_mask is invalid.
+ *      -ENOSYS:   Notification type specified by notify_type is not
+ *                      supported.
+ *  Requires:
+ *      strm_init(void) called.
+ *      hnotification != NULL.
+ *  Ensures:
+ */
+extern int strm_register_notify(struct strm_object *stream_obj,
+				       u32 event_mask, u32 notify_type,
+				       struct dsp_notification
+				       *hnotification);
+
+/*
+ *  ======== strm_select ========
+ *  Purpose:
+ *      Select a ready stream.
+ *  Parameters:
+ *      strm_tab:       Array of stream handles returned from strm_open().
+ *      strms:          Number of stream handles in array.
+ *      pmask:          Location to store mask of ready streams on output.
+ *      utimeout:       Timeout value (milliseconds).
+ *  Returns:
+ *      0:        Success.
+ *      -EDOM:     strms out of range.
+
+ *      -EFAULT:    Invalid stream handle in array.
+ *      -ETIME:   A timeout occurred before a stream became ready.
+ *      -EPERM:      Failure occurred, unable to select a stream.
+ *  Requires:
+ *      strm_init(void) called.
+ *      strm_tab != NULL.
+ *      strms > 0.
+ *      pmask != NULL.
+ *  Ensures:
+ *      0:        *pmask != 0 || utimeout == 0.
+ *      Error:          *pmask == 0.
+ */
+extern int strm_select(struct strm_object **strm_tab,
+			      u32 strms, u32 *pmask, u32 utimeout);
+
+/*
+ *  ======== strm_unprepare_buffer ========
+ *  Purpose:
+ *      Unprepare a data buffer that was previously prepared for a stream
+ *      with DSPStream_PrepareBuffer(), and that will no longer be used with
+ *      the stream.
+ *  Parameter:
+ *      stream_obj:     Stream handle returned from strm_open().
+ *      usize:          Size (GPP bytes) of the buffer.
+ *      pbuffer:        Buffer address.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid stream_obj.
+ *      -EPERM:      Failure occurred, unable to unprepare buffer.
+ *  Requires:
+ *      strm_init(void) called.
+ *      pbuffer != NULL.
+ *  Ensures:
+ */
+extern int strm_unprepare_buffer(struct strm_object *stream_obj,
+					u32 usize, u8 *pbuffer);
+
+#endif /* STRM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/strmdefs.h b/drivers/staging/tidspbridge/include/dspbridge/strmdefs.h
new file mode 100644
index 00000000000..b363f794de3
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/strmdefs.h
@@ -0,0 +1,46 @@
+/*
+ * strmdefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global STRM constants and types.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef STRMDEFS_
+#define STRMDEFS_
+
+#define STRM_MAXEVTNAMELEN      32
+
+struct strm_mgr;
+
+struct strm_object;
+
+struct strm_attr {
+	void *user_event;
+	char *pstr_event_name;
+	void *virt_base;	/* Process virtual base address of
+				 * mapped SM */
+	u32 ul_virt_size;	/* Size of virtual space in bytes */
+	struct dsp_streamattrin *stream_attr_in;
+};
+
+struct stream_info {
+	enum dsp_strmmode strm_mode;	/* transport mode of
+					 * stream(DMA, ZEROCOPY..) */
+	u32 segment_id;		/* Segment strm allocs from. 0 is local mem */
+	void *virt_base;	/* "      " Stream'process virt base */
+	struct dsp_streaminfo *user_strm;	/* User's stream information
+						 * returned */
+};
+
+#endif /* STRMDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/sync.h b/drivers/staging/tidspbridge/include/dspbridge/sync.h
new file mode 100644
index 00000000000..e2651e7b1c4
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/sync.h
@@ -0,0 +1,109 @@
+/*
+ * sync.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Provide synchronization services.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _SYNC_H
+#define _SYNC_H
+
+#include <dspbridge/dbdefs.h>
+
+
+/* Special timeout value indicating an infinite wait: */
+#define SYNC_INFINITE  0xffffffff
+
+/**
+ * struct sync_object - the basic sync_object structure
+ * @comp:	use to signal events
+ * @multi_comp:	use to signal multiple events.
+ *
+ */
+struct sync_object{
+	struct completion comp;
+	struct completion *multi_comp;
+};
+
+/**
+ * sync_init_event() - set initial state for a sync_event element
+ * @event:	event to be initialized.
+ *
+ * Set the initial state for a sync_event element.
+ */
+
+static inline void sync_init_event(struct sync_object *event)
+{
+	init_completion(&event->comp);
+	event->multi_comp = NULL;
+}
+
+/**
+ * sync_reset_event() - reset a sync_event element
+ * @event:	event to be reset.
+ *
+ * This function reset to the initial state to @event.
+ */
+
+static inline void sync_reset_event(struct sync_object *event)
+{
+	INIT_COMPLETION(event->comp);
+	event->multi_comp = NULL;
+}
+
+/**
+ * sync_set_event() - set or signal and specified event
+ * @event:	Event to be set..
+ *
+ * set the @event, if there is an thread waiting for the event
+ * it will be waken up, this function only wakes one thread.
+ */
+
+void sync_set_event(struct sync_object *event);
+
+/**
+ * sync_wait_on_event() - waits for a event to be set.
+ * @event:	events to wait for it.
+ * @timeout	timeout on waiting for the evetn.
+ *
+ * This functios will wait until @event is set or until timeout. In case of
+ * success the function will return 0 and
+ * in case of timeout the function will return -ETIME
+ */
+
+static inline int sync_wait_on_event(struct sync_object *event,
+							unsigned timeout)
+{
+	return wait_for_completion_timeout(&event->comp,
+		msecs_to_jiffies(timeout)) ? 0 : -ETIME;
+}
+
+/**
+ * sync_wait_on_multiple_events() - waits for multiple events to be set.
+ * @events:	Array of events to wait for them.
+ * @count:	number of elements of the array.
+ * @timeout	timeout on waiting for the evetns.
+ * @pu_index	index of the event set.
+ *
+ * This functios will wait until any of the array element is set or until
+ * timeout. In case of success the function will return 0 and
+ * @pu_index will store the index of the array element set and in case
+ * of timeout the function will return -ETIME.
+ */
+
+int sync_wait_on_multiple_events(struct sync_object **events,
+				     unsigned count, unsigned timeout,
+				     unsigned *index);
+
+#endif /* _SYNC_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/utildefs.h b/drivers/staging/tidspbridge/include/dspbridge/utildefs.h
new file mode 100644
index 00000000000..8fe5414824c
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/utildefs.h
@@ -0,0 +1,39 @@
+/*
+ * utildefs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global UTIL constants and types, shared between DSP API and DSPSYS.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef UTILDEFS_
+#define UTILDEFS_
+
+/* constants taken from configmg.h */
+#define UTIL_MAXMEMREGS     9
+#define UTIL_MAXIOPORTS     20
+#define UTIL_MAXIRQS        7
+#define UTIL_MAXDMACHNLS    7
+
+/* misc. constants */
+#define UTIL_MAXARGVS       10
+
+/* Platform specific important info */
+struct util_sysinfo {
+	/* Granularity of page protection; usually 1k or 4k */
+	u32 dw_page_size;
+	u32 dw_allocation_granularity;	/* VM granularity, usually 64K */
+	u32 dw_number_of_processors;	/* Used as sanity check */
+};
+
+#endif /* UTILDEFS_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/uuidutil.h b/drivers/staging/tidspbridge/include/dspbridge/uuidutil.h
new file mode 100644
index 00000000000..9a994753e9b
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/uuidutil.h
@@ -0,0 +1,62 @@
+/*
+ * uuidutil.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file contains the specification of UUID helper functions.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef UUIDUTIL_
+#define UUIDUTIL_
+
+#define MAXUUIDLEN  37
+
+/*
+ *  ======== uuid_uuid_to_string ========
+ *  Purpose:
+ *      Converts a dsp_uuid to an ANSI string.
+ *  Parameters:
+ *      uuid_obj:      Pointer to a dsp_uuid object.
+ *      sz_uuid:    Pointer to a buffer to receive a NULL-terminated UUID
+ *                  string.
+ *      size:	    Maximum size of the sz_uuid string.
+ *  Returns:
+ *  Requires:
+ *      uuid_obj & sz_uuid are non-NULL values.
+ *  Ensures:
+ *      Lenghth of sz_uuid is less than MAXUUIDLEN.
+ *  Details:
+ *      UUID string limit currently set at MAXUUIDLEN.
+ */
+void uuid_uuid_to_string(struct dsp_uuid *uuid_obj, char *sz_uuid,
+			 s32 size);
+
+/*
+ *  ======== uuid_uuid_from_string ========
+ *  Purpose:
+ *      Converts an ANSI string to a dsp_uuid.
+ *  Parameters:
+ *      sz_uuid:    Pointer to a string that represents a dsp_uuid object.
+ *      uuid_obj:      Pointer to a dsp_uuid object.
+ *  Returns:
+ *  Requires:
+ *      uuid_obj & sz_uuid are non-NULL values.
+ *  Ensures:
+ *  Details:
+ *      We assume the string representation of a UUID has the following format:
+ *      "12345678_1234_1234_1234_123456789abc".
+ */
+extern void uuid_uuid_from_string(char *sz_uuid,
+				  struct dsp_uuid *uuid_obj);
+
+#endif /* UUIDUTIL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/wdt.h b/drivers/staging/tidspbridge/include/dspbridge/wdt.h
new file mode 100644
index 00000000000..4c00ba5fa5b
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/wdt.h
@@ -0,0 +1,79 @@
+/*
+ * wdt.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * IO dispatcher for a shared memory channel driver.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef __DSP_WDT3_H_
+#define __DSP_WDT3_H_
+
+/* WDT defines */
+#define OMAP3_WDT3_ISR_OFFSET	0x0018
+
+
+/**
+ * struct dsp_wdt_setting - the basic dsp_wdt_setting structure
+ * @reg_base:	pointer to the base of the wdt registers
+ * @sm_wdt:	pointer to flags in shared memory
+ * @wdt3_tasklet	tasklet to manage wdt event
+ * @fclk		handle to wdt3 functional clock
+ * @iclk		handle to wdt3 interface clock
+ *
+ * This struct is used in the function to manage wdt3.
+ */
+
+struct dsp_wdt_setting {
+	void __iomem *reg_base;
+	struct shm *sm_wdt;
+	struct tasklet_struct wdt3_tasklet;
+	struct clk *fclk;
+	struct clk *iclk;
+};
+
+/**
+ * dsp_wdt_init() - initialize wdt3 module.
+ *
+ * This function initilize to wdt3 module, so that
+ * other wdt3 function can be used.
+ */
+int dsp_wdt_init(void);
+
+/**
+ * dsp_wdt_exit() - initialize wdt3 module.
+ *
+ * This function frees all resources allocated for wdt3 module.
+ */
+void dsp_wdt_exit(void);
+
+/**
+ * dsp_wdt_enable() - enable/disable wdt3
+ * @enable:	bool value to enable/disable wdt3
+ *
+ * This function enables or disables wdt3 base on @enable value.
+ *
+ */
+void dsp_wdt_enable(bool enable);
+
+/**
+ * dsp_wdt_sm_set() - store pointer to the share memory
+ * @data:		pointer to dspbridge share memory
+ *
+ * This function is used to pass a valid pointer to share memory,
+ * so that the flags can be set in order DSP side can read them.
+ *
+ */
+void dsp_wdt_sm_set(void *data);
+
+#endif
+
diff --git a/drivers/staging/tidspbridge/pmgr/chnl.c b/drivers/staging/tidspbridge/pmgr/chnl.c
new file mode 100644
index 00000000000..90317b58f8e
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/chnl.c
@@ -0,0 +1,163 @@
+/*
+ * chnl.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP API channel interface: multiplexes data streams through the single
+ * physical link managed by a Bridge Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/proc.h>
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/chnlpriv.h>
+#include <chnlobj.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/chnl.h>
+
+/*  ----------------------------------- Globals */
+static u32 refs;
+
+/*
+ *  ======== chnl_create ========
+ *  Purpose:
+ *      Create a channel manager object, responsible for opening new channels
+ *      and closing old ones for a given 'Bridge board.
+ */
+int chnl_create(struct chnl_mgr **channel_mgr,
+		       struct dev_object *hdev_obj,
+		       const struct chnl_mgrattrs *mgr_attrts)
+{
+	int status;
+	struct chnl_mgr *hchnl_mgr;
+	struct chnl_mgr_ *chnl_mgr_obj = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(channel_mgr != NULL);
+	DBC_REQUIRE(mgr_attrts != NULL);
+
+	*channel_mgr = NULL;
+
+	/* Validate args: */
+	if ((0 < mgr_attrts->max_channels) &&
+	    (mgr_attrts->max_channels <= CHNL_MAXCHANNELS))
+		status = 0;
+	else if (mgr_attrts->max_channels == 0)
+		status = -EINVAL;
+	else
+		status = -ECHRNG;
+
+	if (mgr_attrts->word_size == 0)
+		status = -EINVAL;
+
+	if (!status) {
+		status = dev_get_chnl_mgr(hdev_obj, &hchnl_mgr);
+		if (!status && hchnl_mgr != NULL)
+			status = -EEXIST;
+
+	}
+
+	if (!status) {
+		struct bridge_drv_interface *intf_fxns;
+		dev_get_intf_fxns(hdev_obj, &intf_fxns);
+		/* Let Bridge channel module finish the create: */
+		status = (*intf_fxns->pfn_chnl_create) (&hchnl_mgr, hdev_obj,
+							mgr_attrts);
+		if (!status) {
+			/* Fill in DSP API channel module's fields of the
+			 * chnl_mgr structure */
+			chnl_mgr_obj = (struct chnl_mgr_ *)hchnl_mgr;
+			chnl_mgr_obj->intf_fxns = intf_fxns;
+			/* Finally, return the new channel manager handle: */
+			*channel_mgr = hchnl_mgr;
+		}
+	}
+
+	DBC_ENSURE(status || chnl_mgr_obj);
+
+	return status;
+}
+
+/*
+ *  ======== chnl_destroy ========
+ *  Purpose:
+ *      Close all open channels, and destroy the channel manager.
+ */
+int chnl_destroy(struct chnl_mgr *hchnl_mgr)
+{
+	struct chnl_mgr_ *chnl_mgr_obj = (struct chnl_mgr_ *)hchnl_mgr;
+	struct bridge_drv_interface *intf_fxns;
+	int status;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (chnl_mgr_obj) {
+		intf_fxns = chnl_mgr_obj->intf_fxns;
+		/* Let Bridge channel module destroy the chnl_mgr: */
+		status = (*intf_fxns->pfn_chnl_destroy) (hchnl_mgr);
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== chnl_exit ========
+ *  Purpose:
+ *      Discontinue usage of the CHNL module.
+ */
+void chnl_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== chnl_init ========
+ *  Purpose:
+ *      Initialize the CHNL module's private state.
+ */
+bool chnl_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/chnlobj.h b/drivers/staging/tidspbridge/pmgr/chnlobj.h
new file mode 100644
index 00000000000..6795e0aa8fd
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/chnlobj.h
@@ -0,0 +1,46 @@
+/*
+ * chnlobj.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Structure subcomponents of channel class library channel objects which
+ * are exposed to DSP API from Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef CHNLOBJ_
+#define CHNLOBJ_
+
+#include <dspbridge/chnldefs.h>
+#include <dspbridge/dspdefs.h>
+
+/*
+ *  This struct is the first field in a chnl_mgr struct. Other. implementation
+ *  specific fields follow this structure in memory.
+ */
+struct chnl_mgr_ {
+	/* These must be the first fields in a chnl_mgr struct: */
+
+	/* Function interface to Bridge driver. */
+	struct bridge_drv_interface *intf_fxns;
+};
+
+/*
+ *  This struct is the first field in a chnl_object struct. Other,
+ *  implementation specific fields follow this structure in memory.
+ */
+struct chnl_object_ {
+	/* These must be the first fields in a chnl_object struct: */
+	struct chnl_mgr_ *chnl_mgr_obj;	/* Pointer back to channel manager. */
+};
+
+#endif /* CHNLOBJ_ */
diff --git a/drivers/staging/tidspbridge/pmgr/cmm.c b/drivers/staging/tidspbridge/pmgr/cmm.c
new file mode 100644
index 00000000000..ce3dc8822af
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/cmm.c
@@ -0,0 +1,1154 @@
+/*
+ * cmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Communication(Shared) Memory Management(CMM) module provides
+ * shared memory management services for DSP/BIOS Bridge data streaming
+ * and messaging.
+ *
+ * Multiple shared memory segments can be registered with CMM.
+ * Each registered SM segment is represented by a SM "allocator" that
+ * describes a block of physically contiguous shared memory used for
+ * future allocations by CMM.
+ *
+ * Memory is coelesced back to the appropriate heap when a buffer is
+ * freed.
+ *
+ * Notes:
+ *   Va: Virtual address.
+ *   Pa: Physical or kernel system address.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/list.h>
+#include <dspbridge/sync.h>
+#include <dspbridge/utildefs.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/proc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/cmm.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define NEXT_PA(pnode)   (pnode->dw_pa + pnode->ul_size)
+
+/* Other bus/platform translations */
+#define DSPPA2GPPPA(base, x, y)  ((x)+(y))
+#define GPPPA2DSPPA(base, x, y)  ((x)-(y))
+
+/*
+ *  Allocators define a block of contiguous memory used for future allocations.
+ *
+ *      sma - shared memory allocator.
+ *      vma - virtual memory allocator.(not used).
+ */
+struct cmm_allocator {		/* sma */
+	unsigned int shm_base;	/* Start of physical SM block */
+	u32 ul_sm_size;		/* Size of SM block in bytes */
+	unsigned int dw_vm_base;	/* Start of VM block. (Dev driver
+					 * context for 'sma') */
+	u32 dw_dsp_phys_addr_offset;	/* DSP PA to GPP PA offset for this
+					 * SM space */
+	s8 c_factor;		/* DSPPa to GPPPa Conversion Factor */
+	unsigned int dw_dsp_base;	/* DSP virt base byte address */
+	u32 ul_dsp_size;	/* DSP seg size in bytes */
+	struct cmm_object *hcmm_mgr;	/* back ref to parent mgr */
+	/* node list of available memory */
+	struct lst_list *free_list_head;
+	/* node list of memory in use */
+	struct lst_list *in_use_list_head;
+};
+
+struct cmm_xlator {		/* Pa<->Va translator object */
+	/* CMM object this translator associated */
+	struct cmm_object *hcmm_mgr;
+	/*
+	 *  Client process virtual base address that corresponds to phys SM
+	 *  base address for translator's ul_seg_id.
+	 *  Only 1 segment ID currently supported.
+	 */
+	unsigned int dw_virt_base;	/* virtual base address */
+	u32 ul_virt_size;	/* size of virt space in bytes */
+	u32 ul_seg_id;		/* Segment Id */
+};
+
+/* CMM Mgr */
+struct cmm_object {
+	/*
+	 * Cmm Lock is used to serialize access mem manager for multi-threads.
+	 */
+	struct mutex cmm_lock;	/* Lock to access cmm mgr */
+	struct lst_list *node_free_list_head;	/* Free list of memory nodes */
+	u32 ul_min_block_size;	/* Min SM block; default 16 bytes */
+	u32 dw_page_size;	/* Memory Page size (1k/4k) */
+	/* GPP SM segment ptrs */
+	struct cmm_allocator *pa_gppsm_seg_tab[CMM_MAXGPPSEGS];
+};
+
+/* Default CMM Mgr attributes */
+static struct cmm_mgrattrs cmm_dfltmgrattrs = {
+	/* ul_min_block_size, min block size(bytes) allocated by cmm mgr */
+	16
+};
+
+/* Default allocation attributes */
+static struct cmm_attrs cmm_dfltalctattrs = {
+	1		/* ul_seg_id, default segment Id for allocator */
+};
+
+/* Address translator default attrs */
+static struct cmm_xlatorattrs cmm_dfltxlatorattrs = {
+	/* ul_seg_id, does not have to match cmm_dfltalctattrs ul_seg_id */
+	1,
+	0,			/* dw_dsp_bufs */
+	0,			/* dw_dsp_buf_size */
+	NULL,			/* vm_base */
+	0,			/* dw_vm_size */
+};
+
+/* SM node representing a block of memory. */
+struct cmm_mnode {
+	struct list_head link;	/* must be 1st element */
+	u32 dw_pa;		/* Phys addr */
+	u32 dw_va;		/* Virtual address in device process context */
+	u32 ul_size;		/* SM block size in bytes */
+	u32 client_proc;	/* Process that allocated this mem block */
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+
+/*  ----------------------------------- Function Prototypes */
+static void add_to_free_list(struct cmm_allocator *allocator,
+			     struct cmm_mnode *pnode);
+static struct cmm_allocator *get_allocator(struct cmm_object *cmm_mgr_obj,
+					   u32 ul_seg_id);
+static struct cmm_mnode *get_free_block(struct cmm_allocator *allocator,
+					u32 usize);
+static struct cmm_mnode *get_node(struct cmm_object *cmm_mgr_obj, u32 dw_pa,
+				  u32 dw_va, u32 ul_size);
+/* get available slot for new allocator */
+static s32 get_slot(struct cmm_object *cmm_mgr_obj);
+static void un_register_gppsm_seg(struct cmm_allocator *psma);
+
+/*
+ *  ======== cmm_calloc_buf ========
+ *  Purpose:
+ *      Allocate a SM buffer, zero contents, and return the physical address
+ *      and optional driver context virtual address(pp_buf_va).
+ *
+ *      The freelist is sorted in increasing size order. Get the first
+ *      block that satifies the request and sort the remaining back on
+ *      the freelist; if large enough. The kept block is placed on the
+ *      inUseList.
+ */
+void *cmm_calloc_buf(struct cmm_object *hcmm_mgr, u32 usize,
+		     struct cmm_attrs *pattrs, void **pp_buf_va)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	void *buf_pa = NULL;
+	struct cmm_mnode *pnode = NULL;
+	struct cmm_mnode *new_node = NULL;
+	struct cmm_allocator *allocator = NULL;
+	u32 delta_size;
+	u8 *pbyte = NULL;
+	s32 cnt;
+
+	if (pattrs == NULL)
+		pattrs = &cmm_dfltalctattrs;
+
+	if (pp_buf_va != NULL)
+		*pp_buf_va = NULL;
+
+	if (cmm_mgr_obj && (usize != 0)) {
+		if (pattrs->ul_seg_id > 0) {
+			/* SegId > 0 is SM */
+			/* get the allocator object for this segment id */
+			allocator =
+			    get_allocator(cmm_mgr_obj, pattrs->ul_seg_id);
+			/* keep block size a multiple of ul_min_block_size */
+			usize =
+			    ((usize - 1) & ~(cmm_mgr_obj->ul_min_block_size -
+					     1))
+			    + cmm_mgr_obj->ul_min_block_size;
+			mutex_lock(&cmm_mgr_obj->cmm_lock);
+			pnode = get_free_block(allocator, usize);
+		}
+		if (pnode) {
+			delta_size = (pnode->ul_size - usize);
+			if (delta_size >= cmm_mgr_obj->ul_min_block_size) {
+				/* create a new block with the leftovers and
+				 * add to freelist */
+				new_node =
+				    get_node(cmm_mgr_obj, pnode->dw_pa + usize,
+					     pnode->dw_va + usize,
+					     (u32) delta_size);
+				/* leftovers go free */
+				add_to_free_list(allocator, new_node);
+				/* adjust our node's size */
+				pnode->ul_size = usize;
+			}
+			/* Tag node with client process requesting allocation
+			 * We'll need to free up a process's alloc'd SM if the
+			 * client process goes away.
+			 */
+			/* Return TGID instead of process handle */
+			pnode->client_proc = current->tgid;
+
+			/* put our node on InUse list */
+			lst_put_tail(allocator->in_use_list_head,
+				     (struct list_head *)pnode);
+			buf_pa = (void *)pnode->dw_pa;	/* physical address */
+			/* clear mem */
+			pbyte = (u8 *) pnode->dw_va;
+			for (cnt = 0; cnt < (s32) usize; cnt++, pbyte++)
+				*pbyte = 0;
+
+			if (pp_buf_va != NULL) {
+				/* Virtual address */
+				*pp_buf_va = (void *)pnode->dw_va;
+			}
+		}
+		mutex_unlock(&cmm_mgr_obj->cmm_lock);
+	}
+	return buf_pa;
+}
+
+/*
+ *  ======== cmm_create ========
+ *  Purpose:
+ *      Create a communication memory manager object.
+ */
+int cmm_create(struct cmm_object **ph_cmm_mgr,
+		      struct dev_object *hdev_obj,
+		      const struct cmm_mgrattrs *mgr_attrts)
+{
+	struct cmm_object *cmm_obj = NULL;
+	int status = 0;
+	struct util_sysinfo sys_info;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(ph_cmm_mgr != NULL);
+
+	*ph_cmm_mgr = NULL;
+	/* create, zero, and tag a cmm mgr object */
+	cmm_obj = kzalloc(sizeof(struct cmm_object), GFP_KERNEL);
+	if (cmm_obj != NULL) {
+		if (mgr_attrts == NULL)
+			mgr_attrts = &cmm_dfltmgrattrs;	/* set defaults */
+
+		/* 4 bytes minimum */
+		DBC_ASSERT(mgr_attrts->ul_min_block_size >= 4);
+		/* save away smallest block allocation for this cmm mgr */
+		cmm_obj->ul_min_block_size = mgr_attrts->ul_min_block_size;
+		/* save away the systems memory page size */
+		sys_info.dw_page_size = PAGE_SIZE;
+		sys_info.dw_allocation_granularity = PAGE_SIZE;
+		sys_info.dw_number_of_processors = 1;
+
+		cmm_obj->dw_page_size = sys_info.dw_page_size;
+
+		/* Note: DSP SM seg table(aDSPSMSegTab[]) zero'd by
+		 * MEM_ALLOC_OBJECT */
+
+		/* create node free list */
+		cmm_obj->node_free_list_head =
+				kzalloc(sizeof(struct lst_list),
+						GFP_KERNEL);
+		if (cmm_obj->node_free_list_head == NULL) {
+			status = -ENOMEM;
+			cmm_destroy(cmm_obj, true);
+		} else {
+			INIT_LIST_HEAD(&cmm_obj->
+				       node_free_list_head->head);
+			mutex_init(&cmm_obj->cmm_lock);
+			*ph_cmm_mgr = cmm_obj;
+		}
+	} else {
+		status = -ENOMEM;
+	}
+	return status;
+}
+
+/*
+ *  ======== cmm_destroy ========
+ *  Purpose:
+ *      Release the communication memory manager resources.
+ */
+int cmm_destroy(struct cmm_object *hcmm_mgr, bool force)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	struct cmm_info temp_info;
+	int status = 0;
+	s32 slot_seg;
+	struct cmm_mnode *pnode;
+
+	DBC_REQUIRE(refs > 0);
+	if (!hcmm_mgr) {
+		status = -EFAULT;
+		return status;
+	}
+	mutex_lock(&cmm_mgr_obj->cmm_lock);
+	/* If not force then fail if outstanding allocations exist */
+	if (!force) {
+		/* Check for outstanding memory allocations */
+		status = cmm_get_info(hcmm_mgr, &temp_info);
+		if (!status) {
+			if (temp_info.ul_total_in_use_cnt > 0) {
+				/* outstanding allocations */
+				status = -EPERM;
+			}
+		}
+	}
+	if (!status) {
+		/* UnRegister SM allocator */
+		for (slot_seg = 0; slot_seg < CMM_MAXGPPSEGS; slot_seg++) {
+			if (cmm_mgr_obj->pa_gppsm_seg_tab[slot_seg] != NULL) {
+				un_register_gppsm_seg
+				    (cmm_mgr_obj->pa_gppsm_seg_tab[slot_seg]);
+				/* Set slot to NULL for future reuse */
+				cmm_mgr_obj->pa_gppsm_seg_tab[slot_seg] = NULL;
+			}
+		}
+	}
+	if (cmm_mgr_obj->node_free_list_head != NULL) {
+		/* Free the free nodes */
+		while (!LST_IS_EMPTY(cmm_mgr_obj->node_free_list_head)) {
+			pnode = (struct cmm_mnode *)
+			    lst_get_head(cmm_mgr_obj->node_free_list_head);
+			kfree(pnode);
+		}
+		/* delete NodeFreeList list */
+		kfree(cmm_mgr_obj->node_free_list_head);
+	}
+	mutex_unlock(&cmm_mgr_obj->cmm_lock);
+	if (!status) {
+		/* delete CS & cmm mgr object */
+		mutex_destroy(&cmm_mgr_obj->cmm_lock);
+		kfree(cmm_mgr_obj);
+	}
+	return status;
+}
+
+/*
+ *  ======== cmm_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ */
+void cmm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+}
+
+/*
+ *  ======== cmm_free_buf ========
+ *  Purpose:
+ *      Free the given buffer.
+ */
+int cmm_free_buf(struct cmm_object *hcmm_mgr, void *buf_pa,
+			u32 ul_seg_id)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	int status = -EFAULT;
+	struct cmm_mnode *mnode_obj = NULL;
+	struct cmm_allocator *allocator = NULL;
+	struct cmm_attrs *pattrs;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(buf_pa != NULL);
+
+	if (ul_seg_id == 0) {
+		pattrs = &cmm_dfltalctattrs;
+		ul_seg_id = pattrs->ul_seg_id;
+	}
+	if (!hcmm_mgr || !(ul_seg_id > 0)) {
+		status = -EFAULT;
+		return status;
+	}
+	/* get the allocator for this segment id */
+	allocator = get_allocator(cmm_mgr_obj, ul_seg_id);
+	if (allocator != NULL) {
+		mutex_lock(&cmm_mgr_obj->cmm_lock);
+		mnode_obj =
+		    (struct cmm_mnode *)lst_first(allocator->in_use_list_head);
+		while (mnode_obj) {
+			if ((u32) buf_pa == mnode_obj->dw_pa) {
+				/* Found it */
+				lst_remove_elem(allocator->in_use_list_head,
+						(struct list_head *)mnode_obj);
+				/* back to freelist */
+				add_to_free_list(allocator, mnode_obj);
+				status = 0;	/* all right! */
+				break;
+			}
+			/* next node. */
+			mnode_obj = (struct cmm_mnode *)
+			    lst_next(allocator->in_use_list_head,
+				     (struct list_head *)mnode_obj);
+		}
+		mutex_unlock(&cmm_mgr_obj->cmm_lock);
+	}
+	return status;
+}
+
+/*
+ *  ======== cmm_get_handle ========
+ *  Purpose:
+ *      Return the communication memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+int cmm_get_handle(void *hprocessor, struct cmm_object ** ph_cmm_mgr)
+{
+	int status = 0;
+	struct dev_object *hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(ph_cmm_mgr != NULL);
+	if (hprocessor != NULL)
+		status = proc_get_dev_object(hprocessor, &hdev_obj);
+	else
+		hdev_obj = dev_get_first();	/* default */
+
+	if (!status)
+		status = dev_get_cmm_mgr(hdev_obj, ph_cmm_mgr);
+
+	return status;
+}
+
+/*
+ *  ======== cmm_get_info ========
+ *  Purpose:
+ *      Return the current memory utilization information.
+ */
+int cmm_get_info(struct cmm_object *hcmm_mgr,
+			struct cmm_info *cmm_info_obj)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	u32 ul_seg;
+	int status = 0;
+	struct cmm_allocator *altr;
+	struct cmm_mnode *mnode_obj = NULL;
+
+	DBC_REQUIRE(cmm_info_obj != NULL);
+
+	if (!hcmm_mgr) {
+		status = -EFAULT;
+		return status;
+	}
+	mutex_lock(&cmm_mgr_obj->cmm_lock);
+	cmm_info_obj->ul_num_gppsm_segs = 0;	/* # of SM segments */
+	/* Total # of outstanding alloc */
+	cmm_info_obj->ul_total_in_use_cnt = 0;
+	/* min block size */
+	cmm_info_obj->ul_min_block_size = cmm_mgr_obj->ul_min_block_size;
+	/* check SM memory segments */
+	for (ul_seg = 1; ul_seg <= CMM_MAXGPPSEGS; ul_seg++) {
+		/* get the allocator object for this segment id */
+		altr = get_allocator(cmm_mgr_obj, ul_seg);
+		if (altr != NULL) {
+			cmm_info_obj->ul_num_gppsm_segs++;
+			cmm_info_obj->seg_info[ul_seg - 1].dw_seg_base_pa =
+			    altr->shm_base - altr->ul_dsp_size;
+			cmm_info_obj->seg_info[ul_seg - 1].ul_total_seg_size =
+			    altr->ul_dsp_size + altr->ul_sm_size;
+			cmm_info_obj->seg_info[ul_seg - 1].dw_gpp_base_pa =
+			    altr->shm_base;
+			cmm_info_obj->seg_info[ul_seg - 1].ul_gpp_size =
+			    altr->ul_sm_size;
+			cmm_info_obj->seg_info[ul_seg - 1].dw_dsp_base_va =
+			    altr->dw_dsp_base;
+			cmm_info_obj->seg_info[ul_seg - 1].ul_dsp_size =
+			    altr->ul_dsp_size;
+			cmm_info_obj->seg_info[ul_seg - 1].dw_seg_base_va =
+			    altr->dw_vm_base - altr->ul_dsp_size;
+			cmm_info_obj->seg_info[ul_seg - 1].ul_in_use_cnt = 0;
+			mnode_obj = (struct cmm_mnode *)
+			    lst_first(altr->in_use_list_head);
+			/* Count inUse blocks */
+			while (mnode_obj) {
+				cmm_info_obj->ul_total_in_use_cnt++;
+				cmm_info_obj->seg_info[ul_seg -
+						       1].ul_in_use_cnt++;
+				/* next node. */
+				mnode_obj = (struct cmm_mnode *)
+				    lst_next(altr->in_use_list_head,
+					     (struct list_head *)mnode_obj);
+			}
+		}
+	}			/* end for */
+	mutex_unlock(&cmm_mgr_obj->cmm_lock);
+	return status;
+}
+
+/*
+ *  ======== cmm_init ========
+ *  Purpose:
+ *      Initializes private state of CMM module.
+ */
+bool cmm_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== cmm_register_gppsm_seg ========
+ *  Purpose:
+ *      Register a block of SM with the CMM to be used for later GPP SM
+ *      allocations.
+ */
+int cmm_register_gppsm_seg(struct cmm_object *hcmm_mgr,
+				  u32 dw_gpp_base_pa, u32 ul_size,
+				  u32 dsp_addr_offset, s8 c_factor,
+				  u32 dw_dsp_base, u32 ul_dsp_size,
+				  u32 *sgmt_id, u32 gpp_base_va)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	struct cmm_allocator *psma = NULL;
+	int status = 0;
+	struct cmm_mnode *new_node;
+	s32 slot_seg;
+
+	DBC_REQUIRE(ul_size > 0);
+	DBC_REQUIRE(sgmt_id != NULL);
+	DBC_REQUIRE(dw_gpp_base_pa != 0);
+	DBC_REQUIRE(gpp_base_va != 0);
+	DBC_REQUIRE((c_factor <= CMM_ADDTODSPPA) &&
+		    (c_factor >= CMM_SUBFROMDSPPA));
+	dev_dbg(bridge, "%s: dw_gpp_base_pa %x ul_size %x dsp_addr_offset %x "
+		"dw_dsp_base %x ul_dsp_size %x gpp_base_va %x\n", __func__,
+		dw_gpp_base_pa, ul_size, dsp_addr_offset, dw_dsp_base,
+		ul_dsp_size, gpp_base_va);
+	if (!hcmm_mgr) {
+		status = -EFAULT;
+		return status;
+	}
+	/* make sure we have room for another allocator */
+	mutex_lock(&cmm_mgr_obj->cmm_lock);
+	slot_seg = get_slot(cmm_mgr_obj);
+	if (slot_seg < 0) {
+		/* get a slot number */
+		status = -EPERM;
+		goto func_end;
+	}
+	/* Check if input ul_size is big enough to alloc at least one block */
+	if (ul_size < cmm_mgr_obj->ul_min_block_size) {
+		status = -EINVAL;
+		goto func_end;
+	}
+
+	/* create, zero, and tag an SM allocator object */
+	psma = kzalloc(sizeof(struct cmm_allocator), GFP_KERNEL);
+	if (psma != NULL) {
+		psma->hcmm_mgr = hcmm_mgr;	/* ref to parent */
+		psma->shm_base = dw_gpp_base_pa;	/* SM Base phys */
+		psma->ul_sm_size = ul_size;	/* SM segment size in bytes */
+		psma->dw_vm_base = gpp_base_va;
+		psma->dw_dsp_phys_addr_offset = dsp_addr_offset;
+		psma->c_factor = c_factor;
+		psma->dw_dsp_base = dw_dsp_base;
+		psma->ul_dsp_size = ul_dsp_size;
+		if (psma->dw_vm_base == 0) {
+			status = -EPERM;
+			goto func_end;
+		}
+		/* return the actual segment identifier */
+		*sgmt_id = (u32) slot_seg + 1;
+		/* create memory free list */
+		psma->free_list_head = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		if (psma->free_list_head == NULL) {
+			status = -ENOMEM;
+			goto func_end;
+		}
+		INIT_LIST_HEAD(&psma->free_list_head->head);
+
+		/* create memory in-use list */
+		psma->in_use_list_head = kzalloc(sizeof(struct
+						lst_list), GFP_KERNEL);
+		if (psma->in_use_list_head == NULL) {
+			status = -ENOMEM;
+			goto func_end;
+		}
+		INIT_LIST_HEAD(&psma->in_use_list_head->head);
+
+		/* Get a mem node for this hunk-o-memory */
+		new_node = get_node(cmm_mgr_obj, dw_gpp_base_pa,
+				    psma->dw_vm_base, ul_size);
+		/* Place node on the SM allocator's free list */
+		if (new_node) {
+			lst_put_tail(psma->free_list_head,
+				     (struct list_head *)new_node);
+		} else {
+			status = -ENOMEM;
+			goto func_end;
+		}
+	} else {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	/* make entry */
+	cmm_mgr_obj->pa_gppsm_seg_tab[slot_seg] = psma;
+
+func_end:
+	if (status && psma) {
+		/* Cleanup allocator */
+		un_register_gppsm_seg(psma);
+	}
+
+	mutex_unlock(&cmm_mgr_obj->cmm_lock);
+	return status;
+}
+
+/*
+ *  ======== cmm_un_register_gppsm_seg ========
+ *  Purpose:
+ *      UnRegister GPP SM segments with the CMM.
+ */
+int cmm_un_register_gppsm_seg(struct cmm_object *hcmm_mgr,
+				     u32 ul_seg_id)
+{
+	struct cmm_object *cmm_mgr_obj = (struct cmm_object *)hcmm_mgr;
+	int status = 0;
+	struct cmm_allocator *psma;
+	u32 ul_id = ul_seg_id;
+
+	DBC_REQUIRE(ul_seg_id > 0);
+	if (hcmm_mgr) {
+		if (ul_seg_id == CMM_ALLSEGMENTS)
+			ul_id = 1;
+
+		if ((ul_id > 0) && (ul_id <= CMM_MAXGPPSEGS)) {
+			while (ul_id <= CMM_MAXGPPSEGS) {
+				mutex_lock(&cmm_mgr_obj->cmm_lock);
+				/* slot = seg_id-1 */
+				psma = cmm_mgr_obj->pa_gppsm_seg_tab[ul_id - 1];
+				if (psma != NULL) {
+					un_register_gppsm_seg(psma);
+					/* Set alctr ptr to NULL for future
+					 * reuse */
+					cmm_mgr_obj->pa_gppsm_seg_tab[ul_id -
+								      1] = NULL;
+				} else if (ul_seg_id != CMM_ALLSEGMENTS) {
+					status = -EPERM;
+				}
+				mutex_unlock(&cmm_mgr_obj->cmm_lock);
+				if (ul_seg_id != CMM_ALLSEGMENTS)
+					break;
+
+				ul_id++;
+			}	/* end while */
+		} else {
+			status = -EINVAL;
+		}
+	} else {
+		status = -EFAULT;
+	}
+	return status;
+}
+
+/*
+ *  ======== un_register_gppsm_seg ========
+ *  Purpose:
+ *      UnRegister the SM allocator by freeing all its resources and
+ *      nulling cmm mgr table entry.
+ *  Note:
+ *      This routine is always called within cmm lock crit sect.
+ */
+static void un_register_gppsm_seg(struct cmm_allocator *psma)
+{
+	struct cmm_mnode *mnode_obj = NULL;
+	struct cmm_mnode *next_node = NULL;
+
+	DBC_REQUIRE(psma != NULL);
+	if (psma->free_list_head != NULL) {
+		/* free nodes on free list */
+		mnode_obj = (struct cmm_mnode *)lst_first(psma->free_list_head);
+		while (mnode_obj) {
+			next_node =
+			    (struct cmm_mnode *)lst_next(psma->free_list_head,
+							 (struct list_head *)
+							 mnode_obj);
+			lst_remove_elem(psma->free_list_head,
+					(struct list_head *)mnode_obj);
+			kfree((void *)mnode_obj);
+			/* next node. */
+			mnode_obj = next_node;
+		}
+		kfree(psma->free_list_head);	/* delete freelist */
+		/* free nodes on InUse list */
+		mnode_obj =
+		    (struct cmm_mnode *)lst_first(psma->in_use_list_head);
+		while (mnode_obj) {
+			next_node =
+			    (struct cmm_mnode *)lst_next(psma->in_use_list_head,
+							 (struct list_head *)
+							 mnode_obj);
+			lst_remove_elem(psma->in_use_list_head,
+					(struct list_head *)mnode_obj);
+			kfree((void *)mnode_obj);
+			/* next node. */
+			mnode_obj = next_node;
+		}
+		kfree(psma->in_use_list_head);	/* delete InUse list */
+	}
+	if ((void *)psma->dw_vm_base != NULL)
+		MEM_UNMAP_LINEAR_ADDRESS((void *)psma->dw_vm_base);
+
+	/* Free allocator itself */
+	kfree(psma);
+}
+
+/*
+ *  ======== get_slot ========
+ *  Purpose:
+ *      An available slot # is returned. Returns negative on failure.
+ */
+static s32 get_slot(struct cmm_object *cmm_mgr_obj)
+{
+	s32 slot_seg = -1;	/* neg on failure */
+	DBC_REQUIRE(cmm_mgr_obj != NULL);
+	/* get first available slot in cmm mgr SMSegTab[] */
+	for (slot_seg = 0; slot_seg < CMM_MAXGPPSEGS; slot_seg++) {
+		if (cmm_mgr_obj->pa_gppsm_seg_tab[slot_seg] == NULL)
+			break;
+
+	}
+	if (slot_seg == CMM_MAXGPPSEGS)
+		slot_seg = -1;	/* failed */
+
+	return slot_seg;
+}
+
+/*
+ *  ======== get_node ========
+ *  Purpose:
+ *      Get a memory node from freelist or create a new one.
+ */
+static struct cmm_mnode *get_node(struct cmm_object *cmm_mgr_obj, u32 dw_pa,
+				  u32 dw_va, u32 ul_size)
+{
+	struct cmm_mnode *pnode = NULL;
+
+	DBC_REQUIRE(cmm_mgr_obj != NULL);
+	DBC_REQUIRE(dw_pa != 0);
+	DBC_REQUIRE(dw_va != 0);
+	DBC_REQUIRE(ul_size != 0);
+	/* Check cmm mgr's node freelist */
+	if (LST_IS_EMPTY(cmm_mgr_obj->node_free_list_head)) {
+		pnode = kzalloc(sizeof(struct cmm_mnode), GFP_KERNEL);
+	} else {
+		/* surely a valid element */
+		pnode = (struct cmm_mnode *)
+		    lst_get_head(cmm_mgr_obj->node_free_list_head);
+	}
+	if (pnode) {
+		lst_init_elem((struct list_head *)pnode);	/* set self */
+		pnode->dw_pa = dw_pa;	/* Physical addr of start of block */
+		pnode->dw_va = dw_va;	/* Virtual   "            " */
+		pnode->ul_size = ul_size;	/* Size of block */
+	}
+	return pnode;
+}
+
+/*
+ *  ======== delete_node ========
+ *  Purpose:
+ *      Put a memory node on the cmm nodelist for later use.
+ *      Doesn't actually delete the node. Heap thrashing friendly.
+ */
+static void delete_node(struct cmm_object *cmm_mgr_obj, struct cmm_mnode *pnode)
+{
+	DBC_REQUIRE(pnode != NULL);
+	lst_init_elem((struct list_head *)pnode);	/* init .self ptr */
+	lst_put_tail(cmm_mgr_obj->node_free_list_head,
+		     (struct list_head *)pnode);
+}
+
+/*
+ * ====== get_free_block ========
+ *  Purpose:
+ *      Scan the free block list and return the first block that satisfies
+ *      the size.
+ */
+static struct cmm_mnode *get_free_block(struct cmm_allocator *allocator,
+					u32 usize)
+{
+	if (allocator) {
+		struct cmm_mnode *mnode_obj = (struct cmm_mnode *)
+		    lst_first(allocator->free_list_head);
+		while (mnode_obj) {
+			if (usize <= (u32) mnode_obj->ul_size) {
+				lst_remove_elem(allocator->free_list_head,
+						(struct list_head *)mnode_obj);
+				return mnode_obj;
+			}
+			/* next node. */
+			mnode_obj = (struct cmm_mnode *)
+			    lst_next(allocator->free_list_head,
+				     (struct list_head *)mnode_obj);
+		}
+	}
+	return NULL;
+}
+
+/*
+ *  ======== add_to_free_list ========
+ *  Purpose:
+ *      Coelesce node into the freelist in ascending size order.
+ */
+static void add_to_free_list(struct cmm_allocator *allocator,
+			     struct cmm_mnode *pnode)
+{
+	struct cmm_mnode *node_prev = NULL;
+	struct cmm_mnode *node_next = NULL;
+	struct cmm_mnode *mnode_obj;
+	u32 dw_this_pa;
+	u32 dw_next_pa;
+
+	DBC_REQUIRE(pnode != NULL);
+	DBC_REQUIRE(allocator != NULL);
+	dw_this_pa = pnode->dw_pa;
+	dw_next_pa = NEXT_PA(pnode);
+	mnode_obj = (struct cmm_mnode *)lst_first(allocator->free_list_head);
+	while (mnode_obj) {
+		if (dw_this_pa == NEXT_PA(mnode_obj)) {
+			/* found the block ahead of this one */
+			node_prev = mnode_obj;
+		} else if (dw_next_pa == mnode_obj->dw_pa) {
+			node_next = mnode_obj;
+		}
+		if ((node_prev == NULL) || (node_next == NULL)) {
+			/* next node. */
+			mnode_obj = (struct cmm_mnode *)
+			    lst_next(allocator->free_list_head,
+				     (struct list_head *)mnode_obj);
+		} else {
+			/* got 'em */
+			break;
+		}
+	}			/* while */
+	if (node_prev != NULL) {
+		/* combine with previous block */
+		lst_remove_elem(allocator->free_list_head,
+				(struct list_head *)node_prev);
+		/* grow node to hold both */
+		pnode->ul_size += node_prev->ul_size;
+		pnode->dw_pa = node_prev->dw_pa;
+		pnode->dw_va = node_prev->dw_va;
+		/* place node on mgr nodeFreeList */
+		delete_node((struct cmm_object *)allocator->hcmm_mgr,
+			    node_prev);
+	}
+	if (node_next != NULL) {
+		/* combine with next block */
+		lst_remove_elem(allocator->free_list_head,
+				(struct list_head *)node_next);
+		/* grow da node */
+		pnode->ul_size += node_next->ul_size;
+		/* place node on mgr nodeFreeList */
+		delete_node((struct cmm_object *)allocator->hcmm_mgr,
+			    node_next);
+	}
+	/* Now, let's add to freelist in increasing size order */
+	mnode_obj = (struct cmm_mnode *)lst_first(allocator->free_list_head);
+	while (mnode_obj) {
+		if (pnode->ul_size <= mnode_obj->ul_size)
+			break;
+
+		/* next node. */
+		mnode_obj =
+		    (struct cmm_mnode *)lst_next(allocator->free_list_head,
+						 (struct list_head *)mnode_obj);
+	}
+	/* if mnode_obj is NULL then add our pnode to the end of the freelist */
+	if (mnode_obj == NULL) {
+		lst_put_tail(allocator->free_list_head,
+			     (struct list_head *)pnode);
+	} else {
+		/* insert our node before the current traversed node */
+		lst_insert_before(allocator->free_list_head,
+				  (struct list_head *)pnode,
+				  (struct list_head *)mnode_obj);
+	}
+}
+
+/*
+ * ======== get_allocator ========
+ *  Purpose:
+ *      Return the allocator for the given SM Segid.
+ *      SegIds:  1,2,3..max.
+ */
+static struct cmm_allocator *get_allocator(struct cmm_object *cmm_mgr_obj,
+					   u32 ul_seg_id)
+{
+	struct cmm_allocator *allocator = NULL;
+
+	DBC_REQUIRE(cmm_mgr_obj != NULL);
+	DBC_REQUIRE((ul_seg_id > 0) && (ul_seg_id <= CMM_MAXGPPSEGS));
+	allocator = cmm_mgr_obj->pa_gppsm_seg_tab[ul_seg_id - 1];
+	if (allocator != NULL) {
+		/* make sure it's for real */
+		if (!allocator) {
+			allocator = NULL;
+			DBC_ASSERT(false);
+		}
+	}
+	return allocator;
+}
+
+/*
+ *  The CMM_Xlator[xxx] routines below are used by Node and Stream
+ *  to perform SM address translation to the client process address space.
+ *  A "translator" object is created by a node/stream for each SM seg used.
+ */
+
+/*
+ *  ======== cmm_xlator_create ========
+ *  Purpose:
+ *      Create an address translator object.
+ */
+int cmm_xlator_create(struct cmm_xlatorobject **xlator,
+			     struct cmm_object *hcmm_mgr,
+			     struct cmm_xlatorattrs *xlator_attrs)
+{
+	struct cmm_xlator *xlator_object = NULL;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(xlator != NULL);
+	DBC_REQUIRE(hcmm_mgr != NULL);
+
+	*xlator = NULL;
+	if (xlator_attrs == NULL)
+		xlator_attrs = &cmm_dfltxlatorattrs;	/* set defaults */
+
+	xlator_object = kzalloc(sizeof(struct cmm_xlator), GFP_KERNEL);
+	if (xlator_object != NULL) {
+		xlator_object->hcmm_mgr = hcmm_mgr;	/* ref back to CMM */
+		/* SM seg_id */
+		xlator_object->ul_seg_id = xlator_attrs->ul_seg_id;
+	} else {
+		status = -ENOMEM;
+	}
+	if (!status)
+		*xlator = (struct cmm_xlatorobject *)xlator_object;
+
+	return status;
+}
+
+/*
+ *  ======== cmm_xlator_delete ========
+ *  Purpose:
+ *      Free the Xlator resources.
+ *      VM gets freed later.
+ */
+int cmm_xlator_delete(struct cmm_xlatorobject *xlator, bool force)
+{
+	struct cmm_xlator *xlator_obj = (struct cmm_xlator *)xlator;
+
+	DBC_REQUIRE(refs > 0);
+
+	kfree(xlator_obj);
+
+	return 0;
+}
+
+/*
+ *  ======== cmm_xlator_alloc_buf ========
+ */
+void *cmm_xlator_alloc_buf(struct cmm_xlatorobject *xlator, void *va_buf,
+			   u32 pa_size)
+{
+	struct cmm_xlator *xlator_obj = (struct cmm_xlator *)xlator;
+	void *pbuf = NULL;
+	void *tmp_va_buff;
+	struct cmm_attrs attrs;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(xlator != NULL);
+	DBC_REQUIRE(xlator_obj->hcmm_mgr != NULL);
+	DBC_REQUIRE(va_buf != NULL);
+	DBC_REQUIRE(pa_size > 0);
+	DBC_REQUIRE(xlator_obj->ul_seg_id > 0);
+
+	if (xlator_obj) {
+		attrs.ul_seg_id = xlator_obj->ul_seg_id;
+		__raw_writel(0, va_buf);
+		/* Alloc SM */
+		pbuf =
+		    cmm_calloc_buf(xlator_obj->hcmm_mgr, pa_size, &attrs, NULL);
+		if (pbuf) {
+			/* convert to translator(node/strm) process Virtual
+			 * address */
+			 tmp_va_buff = cmm_xlator_translate(xlator,
+							 pbuf, CMM_PA2VA);
+			__raw_writel((u32)tmp_va_buff, va_buf);
+		}
+	}
+	return pbuf;
+}
+
+/*
+ *  ======== cmm_xlator_free_buf ========
+ *  Purpose:
+ *      Free the given SM buffer and descriptor.
+ *      Does not free virtual memory.
+ */
+int cmm_xlator_free_buf(struct cmm_xlatorobject *xlator, void *buf_va)
+{
+	struct cmm_xlator *xlator_obj = (struct cmm_xlator *)xlator;
+	int status = -EPERM;
+	void *buf_pa = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(buf_va != NULL);
+	DBC_REQUIRE(xlator_obj->ul_seg_id > 0);
+
+	if (xlator_obj) {
+		/* convert Va to Pa so we can free it. */
+		buf_pa = cmm_xlator_translate(xlator, buf_va, CMM_VA2PA);
+		if (buf_pa) {
+			status = cmm_free_buf(xlator_obj->hcmm_mgr, buf_pa,
+					      xlator_obj->ul_seg_id);
+			if (status) {
+				/* Uh oh, this shouldn't happen. Descriptor
+				 * gone! */
+				DBC_ASSERT(false);	/* CMM is leaking mem */
+			}
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== cmm_xlator_info ========
+ *  Purpose:
+ *      Set/Get translator info.
+ */
+int cmm_xlator_info(struct cmm_xlatorobject *xlator, u8 ** paddr,
+			   u32 ul_size, u32 segm_id, bool set_info)
+{
+	struct cmm_xlator *xlator_obj = (struct cmm_xlator *)xlator;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(paddr != NULL);
+	DBC_REQUIRE((segm_id > 0) && (segm_id <= CMM_MAXGPPSEGS));
+
+	if (xlator_obj) {
+		if (set_info) {
+			/* set translators virtual address range */
+			xlator_obj->dw_virt_base = (u32) *paddr;
+			xlator_obj->ul_virt_size = ul_size;
+		} else {	/* return virt base address */
+			*paddr = (u8 *) xlator_obj->dw_virt_base;
+		}
+	} else {
+		status = -EFAULT;
+	}
+	return status;
+}
+
+/*
+ *  ======== cmm_xlator_translate ========
+ */
+void *cmm_xlator_translate(struct cmm_xlatorobject *xlator, void *paddr,
+			   enum cmm_xlatetype xtype)
+{
+	u32 dw_addr_xlate = 0;
+	struct cmm_xlator *xlator_obj = (struct cmm_xlator *)xlator;
+	struct cmm_object *cmm_mgr_obj = NULL;
+	struct cmm_allocator *allocator = NULL;
+	u32 dw_offset = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(paddr != NULL);
+	DBC_REQUIRE((xtype >= CMM_VA2PA) && (xtype <= CMM_DSPPA2PA));
+
+	if (!xlator_obj)
+		goto loop_cont;
+
+	cmm_mgr_obj = (struct cmm_object *)xlator_obj->hcmm_mgr;
+	/* get this translator's default SM allocator */
+	DBC_ASSERT(xlator_obj->ul_seg_id > 0);
+	allocator = cmm_mgr_obj->pa_gppsm_seg_tab[xlator_obj->ul_seg_id - 1];
+	if (!allocator)
+		goto loop_cont;
+
+	if ((xtype == CMM_VA2DSPPA) || (xtype == CMM_VA2PA) ||
+	    (xtype == CMM_PA2VA)) {
+		if (xtype == CMM_PA2VA) {
+			/* Gpp Va = Va Base + offset */
+			dw_offset = (u8 *) paddr - (u8 *) (allocator->shm_base -
+							   allocator->
+							   ul_dsp_size);
+			dw_addr_xlate = xlator_obj->dw_virt_base + dw_offset;
+			/* Check if translated Va base is in range */
+			if ((dw_addr_xlate < xlator_obj->dw_virt_base) ||
+			    (dw_addr_xlate >=
+			     (xlator_obj->dw_virt_base +
+			      xlator_obj->ul_virt_size))) {
+				dw_addr_xlate = 0;	/* bad address */
+			}
+		} else {
+			/* Gpp PA =  Gpp Base + offset */
+			dw_offset =
+			    (u8 *) paddr - (u8 *) xlator_obj->dw_virt_base;
+			dw_addr_xlate =
+			    allocator->shm_base - allocator->ul_dsp_size +
+			    dw_offset;
+		}
+	} else {
+		dw_addr_xlate = (u32) paddr;
+	}
+	/*Now convert address to proper target physical address if needed */
+	if ((xtype == CMM_VA2DSPPA) || (xtype == CMM_PA2DSPPA)) {
+		/* Got Gpp Pa now, convert to DSP Pa */
+		dw_addr_xlate =
+		    GPPPA2DSPPA((allocator->shm_base - allocator->ul_dsp_size),
+				dw_addr_xlate,
+				allocator->dw_dsp_phys_addr_offset *
+				allocator->c_factor);
+	} else if (xtype == CMM_DSPPA2PA) {
+		/* Got DSP Pa, convert to GPP Pa */
+		dw_addr_xlate =
+		    DSPPA2GPPPA(allocator->shm_base - allocator->ul_dsp_size,
+				dw_addr_xlate,
+				allocator->dw_dsp_phys_addr_offset *
+				allocator->c_factor);
+	}
+loop_cont:
+	return (void *)dw_addr_xlate;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/cod.c b/drivers/staging/tidspbridge/pmgr/cod.c
new file mode 100644
index 00000000000..52989ab67cf
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/cod.c
@@ -0,0 +1,652 @@
+/*
+ * cod.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This module implements DSP code management for the DSP/BIOS Bridge
+ * environment. It is mostly a thin wrapper.
+ *
+ * This module provides an interface for loading both static and
+ * dynamic code objects onto DSP systems.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/ldr.h>
+
+/*  ----------------------------------- Platform Manager */
+/* Include appropriate loader header file */
+#include <dspbridge/dbll.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/cod.h>
+
+/*
+ *  ======== cod_manager ========
+ */
+struct cod_manager {
+	struct dbll_tar_obj *target;
+	struct dbll_library_obj *base_lib;
+	bool loaded;		/* Base library loaded? */
+	u32 ul_entry;
+	struct ldr_module *dll_obj;
+	struct dbll_fxns fxns;
+	struct dbll_attrs attrs;
+	char sz_zl_file[COD_MAXPATHLENGTH];
+};
+
+/*
+ *  ======== cod_libraryobj ========
+ */
+struct cod_libraryobj {
+	struct dbll_library_obj *dbll_lib;
+	struct cod_manager *cod_mgr;
+};
+
+static u32 refs = 0L;
+
+static struct dbll_fxns ldr_fxns = {
+	(dbll_close_fxn) dbll_close,
+	(dbll_create_fxn) dbll_create,
+	(dbll_delete_fxn) dbll_delete,
+	(dbll_exit_fxn) dbll_exit,
+	(dbll_get_attrs_fxn) dbll_get_attrs,
+	(dbll_get_addr_fxn) dbll_get_addr,
+	(dbll_get_c_addr_fxn) dbll_get_c_addr,
+	(dbll_get_sect_fxn) dbll_get_sect,
+	(dbll_init_fxn) dbll_init,
+	(dbll_load_fxn) dbll_load,
+	(dbll_load_sect_fxn) dbll_load_sect,
+	(dbll_open_fxn) dbll_open,
+	(dbll_read_sect_fxn) dbll_read_sect,
+	(dbll_set_attrs_fxn) dbll_set_attrs,
+	(dbll_unload_fxn) dbll_unload,
+	(dbll_unload_sect_fxn) dbll_unload_sect,
+};
+
+static bool no_op(void);
+
+/*
+ * File operations (originally were under kfile.c)
+ */
+static s32 cod_f_close(struct file *filp)
+{
+	/* Check for valid handle */
+	if (!filp)
+		return -EFAULT;
+
+	filp_close(filp, NULL);
+
+	/* we can't use 0 here */
+	return 0;
+}
+
+static struct file *cod_f_open(const char *psz_file_name, const char *sz_mode)
+{
+	mm_segment_t fs;
+	struct file *filp;
+
+	fs = get_fs();
+	set_fs(get_ds());
+
+	/* ignore given mode and open file as read-only */
+	filp = filp_open(psz_file_name, O_RDONLY, 0);
+
+	if (IS_ERR(filp))
+		filp = NULL;
+
+	set_fs(fs);
+
+	return filp;
+}
+
+static s32 cod_f_read(void __user *pbuffer, s32 size, s32 count,
+		      struct file *filp)
+{
+	/* check for valid file handle */
+	if (!filp)
+		return -EFAULT;
+
+	if ((size > 0) && (count > 0) && pbuffer) {
+		u32 dw_bytes_read;
+		mm_segment_t fs;
+
+		/* read from file */
+		fs = get_fs();
+		set_fs(get_ds());
+		dw_bytes_read = filp->f_op->read(filp, pbuffer, size * count,
+						 &(filp->f_pos));
+		set_fs(fs);
+
+		if (!dw_bytes_read)
+			return -EBADF;
+
+		return dw_bytes_read / size;
+	}
+
+	return -EINVAL;
+}
+
+static s32 cod_f_seek(struct file *filp, s32 offset, s32 origin)
+{
+	loff_t dw_cur_pos;
+
+	/* check for valid file handle */
+	if (!filp)
+		return -EFAULT;
+
+	/* based on the origin flag, move the internal pointer */
+	dw_cur_pos = filp->f_op->llseek(filp, offset, origin);
+
+	if ((s32) dw_cur_pos < 0)
+		return -EPERM;
+
+	/* we can't use 0 here */
+	return 0;
+}
+
+static s32 cod_f_tell(struct file *filp)
+{
+	loff_t dw_cur_pos;
+
+	if (!filp)
+		return -EFAULT;
+
+	/* Get current position */
+	dw_cur_pos = filp->f_op->llseek(filp, 0, SEEK_CUR);
+
+	if ((s32) dw_cur_pos < 0)
+		return -EPERM;
+
+	return dw_cur_pos;
+}
+
+/*
+ *  ======== cod_close ========
+ */
+void cod_close(struct cod_libraryobj *lib)
+{
+	struct cod_manager *hmgr;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(lib != NULL);
+	DBC_REQUIRE(lib->cod_mgr);
+
+	hmgr = lib->cod_mgr;
+	hmgr->fxns.close_fxn(lib->dbll_lib);
+
+	kfree(lib);
+}
+
+/*
+ *  ======== cod_create ========
+ *  Purpose:
+ *      Create an object to manage code on a DSP system.
+ *      This object can be used to load an initial program image with
+ *      arguments that can later be expanded with
+ *      dynamically loaded object files.
+ *
+ */
+int cod_create(struct cod_manager **mgr, char *str_zl_file,
+		      const struct cod_attrs *attrs)
+{
+	struct cod_manager *mgr_new;
+	struct dbll_attrs zl_attrs;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	/* assume failure */
+	*mgr = NULL;
+
+	/* we don't support non-default attrs yet */
+	if (attrs != NULL)
+		return -ENOSYS;
+
+	mgr_new = kzalloc(sizeof(struct cod_manager), GFP_KERNEL);
+	if (mgr_new == NULL)
+		return -ENOMEM;
+
+	/* Set up loader functions */
+	mgr_new->fxns = ldr_fxns;
+
+	/* initialize the ZL module */
+	mgr_new->fxns.init_fxn();
+
+	zl_attrs.alloc = (dbll_alloc_fxn) no_op;
+	zl_attrs.free = (dbll_free_fxn) no_op;
+	zl_attrs.fread = (dbll_read_fxn) cod_f_read;
+	zl_attrs.fseek = (dbll_seek_fxn) cod_f_seek;
+	zl_attrs.ftell = (dbll_tell_fxn) cod_f_tell;
+	zl_attrs.fclose = (dbll_f_close_fxn) cod_f_close;
+	zl_attrs.fopen = (dbll_f_open_fxn) cod_f_open;
+	zl_attrs.sym_lookup = NULL;
+	zl_attrs.base_image = true;
+	zl_attrs.log_write = NULL;
+	zl_attrs.log_write_handle = NULL;
+	zl_attrs.write = NULL;
+	zl_attrs.rmm_handle = NULL;
+	zl_attrs.input_params = NULL;
+	zl_attrs.sym_handle = NULL;
+	zl_attrs.sym_arg = NULL;
+
+	mgr_new->attrs = zl_attrs;
+
+	status = mgr_new->fxns.create_fxn(&mgr_new->target, &zl_attrs);
+
+	if (status) {
+		cod_delete(mgr_new);
+		return -ESPIPE;
+	}
+
+	/* return the new manager */
+	*mgr = mgr_new;
+
+	return 0;
+}
+
+/*
+ *  ======== cod_delete ========
+ *  Purpose:
+ *      Delete a code manager object.
+ */
+void cod_delete(struct cod_manager *cod_mgr_obj)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+
+	if (cod_mgr_obj->base_lib) {
+		if (cod_mgr_obj->loaded)
+			cod_mgr_obj->fxns.unload_fxn(cod_mgr_obj->base_lib,
+							&cod_mgr_obj->attrs);
+
+		cod_mgr_obj->fxns.close_fxn(cod_mgr_obj->base_lib);
+	}
+	if (cod_mgr_obj->target) {
+		cod_mgr_obj->fxns.delete_fxn(cod_mgr_obj->target);
+		cod_mgr_obj->fxns.exit_fxn();
+	}
+	kfree(cod_mgr_obj);
+}
+
+/*
+ *  ======== cod_exit ========
+ *  Purpose:
+ *      Discontinue usage of the COD module.
+ *
+ */
+void cod_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== cod_get_base_lib ========
+ *  Purpose:
+ *      Get handle to the base image DBL library.
+ */
+int cod_get_base_lib(struct cod_manager *cod_mgr_obj,
+			    struct dbll_library_obj **plib)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(plib != NULL);
+
+	*plib = (struct dbll_library_obj *)cod_mgr_obj->base_lib;
+
+	return status;
+}
+
+/*
+ *  ======== cod_get_base_name ========
+ */
+int cod_get_base_name(struct cod_manager *cod_mgr_obj, char *sz_name,
+			     u32 usize)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(sz_name != NULL);
+
+	if (usize <= COD_MAXPATHLENGTH)
+		strncpy(sz_name, cod_mgr_obj->sz_zl_file, usize);
+	else
+		status = -EPERM;
+
+	return status;
+}
+
+/*
+ *  ======== cod_get_entry ========
+ *  Purpose:
+ *      Retrieve the entry point of a loaded DSP program image
+ *
+ */
+int cod_get_entry(struct cod_manager *cod_mgr_obj, u32 *entry_pt)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(entry_pt != NULL);
+
+	*entry_pt = cod_mgr_obj->ul_entry;
+
+	return 0;
+}
+
+/*
+ *  ======== cod_get_loader ========
+ *  Purpose:
+ *      Get handle to the DBLL loader.
+ */
+int cod_get_loader(struct cod_manager *cod_mgr_obj,
+			  struct dbll_tar_obj **loader)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(loader != NULL);
+
+	*loader = (struct dbll_tar_obj *)cod_mgr_obj->target;
+
+	return status;
+}
+
+/*
+ *  ======== cod_get_section ========
+ *  Purpose:
+ *      Retrieve the starting address and length of a section in the COFF file
+ *      given the section name.
+ */
+int cod_get_section(struct cod_libraryobj *lib, char *str_sect,
+			   u32 *addr, u32 *len)
+{
+	struct cod_manager *cod_mgr_obj;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(lib != NULL);
+	DBC_REQUIRE(lib->cod_mgr);
+	DBC_REQUIRE(str_sect != NULL);
+	DBC_REQUIRE(addr != NULL);
+	DBC_REQUIRE(len != NULL);
+
+	*addr = 0;
+	*len = 0;
+	if (lib != NULL) {
+		cod_mgr_obj = lib->cod_mgr;
+		status = cod_mgr_obj->fxns.get_sect_fxn(lib->dbll_lib, str_sect,
+							addr, len);
+	} else {
+		status = -ESPIPE;
+	}
+
+	DBC_ENSURE(!status || ((*addr == 0) && (*len == 0)));
+
+	return status;
+}
+
+/*
+ *  ======== cod_get_sym_value ========
+ *  Purpose:
+ *      Retrieve the value for the specified symbol. The symbol is first
+ *      searched for literally and then, if not found, searched for as a
+ *      C symbol.
+ *
+ */
+int cod_get_sym_value(struct cod_manager *cod_mgr_obj, char *str_sym,
+			     u32 *pul_value)
+{
+	struct dbll_sym_val *dbll_sym;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(str_sym != NULL);
+	DBC_REQUIRE(pul_value != NULL);
+
+	dev_dbg(bridge, "%s: cod_mgr_obj: %p str_sym: %s pul_value: %p\n",
+		__func__, cod_mgr_obj, str_sym, pul_value);
+	if (cod_mgr_obj->base_lib) {
+		if (!cod_mgr_obj->fxns.
+		    get_addr_fxn(cod_mgr_obj->base_lib, str_sym, &dbll_sym)) {
+			if (!cod_mgr_obj->fxns.
+			    get_c_addr_fxn(cod_mgr_obj->base_lib, str_sym,
+						&dbll_sym))
+				return -ESPIPE;
+		}
+	} else {
+		return -ESPIPE;
+	}
+
+	*pul_value = dbll_sym->value;
+
+	return 0;
+}
+
+/*
+ *  ======== cod_init ========
+ *  Purpose:
+ *      Initialize the COD module's private state.
+ *
+ */
+bool cod_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && refs > 0) || (!ret && refs >= 0));
+	return ret;
+}
+
+/*
+ *  ======== cod_load_base ========
+ *  Purpose:
+ *      Load the initial program image, optionally with command-line arguments,
+ *      on the DSP system managed by the supplied handle. The program to be
+ *      loaded must be the first element of the args array and must be a fully
+ *      qualified pathname.
+ *  Details:
+ *      if num_argc doesn't match the number of arguments in the args array, the
+ *      args array is searched for a NULL terminating entry, and argc is
+ *      recalculated to reflect this.  In this way, we can support NULL
+ *      terminating args arrays, if num_argc is very large.
+ */
+int cod_load_base(struct cod_manager *cod_mgr_obj, u32 num_argc, char *args[],
+			 cod_writefxn pfn_write, void *arb, char *envp[])
+{
+	dbll_flags flags;
+	struct dbll_attrs save_attrs;
+	struct dbll_attrs new_attrs;
+	int status;
+	u32 i;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr_obj);
+	DBC_REQUIRE(num_argc > 0);
+	DBC_REQUIRE(args != NULL);
+	DBC_REQUIRE(args[0] != NULL);
+	DBC_REQUIRE(pfn_write != NULL);
+	DBC_REQUIRE(cod_mgr_obj->base_lib != NULL);
+
+	/*
+	 *  Make sure every argv[] stated in argc has a value, or change argc to
+	 *  reflect true number in NULL terminated argv array.
+	 */
+	for (i = 0; i < num_argc; i++) {
+		if (args[i] == NULL) {
+			num_argc = i;
+			break;
+		}
+	}
+
+	/* set the write function for this operation */
+	cod_mgr_obj->fxns.get_attrs_fxn(cod_mgr_obj->target, &save_attrs);
+
+	new_attrs = save_attrs;
+	new_attrs.write = (dbll_write_fxn) pfn_write;
+	new_attrs.input_params = arb;
+	new_attrs.alloc = (dbll_alloc_fxn) no_op;
+	new_attrs.free = (dbll_free_fxn) no_op;
+	new_attrs.log_write = NULL;
+	new_attrs.log_write_handle = NULL;
+
+	/* Load the image */
+	flags = DBLL_CODE | DBLL_DATA | DBLL_SYMB;
+	status = cod_mgr_obj->fxns.load_fxn(cod_mgr_obj->base_lib, flags,
+					    &new_attrs,
+					    &cod_mgr_obj->ul_entry);
+	if (status)
+		cod_mgr_obj->fxns.close_fxn(cod_mgr_obj->base_lib);
+
+	if (!status)
+		cod_mgr_obj->loaded = true;
+	else
+		cod_mgr_obj->base_lib = NULL;
+
+	return status;
+}
+
+/*
+ *  ======== cod_open ========
+ *      Open library for reading sections.
+ */
+int cod_open(struct cod_manager *hmgr, char *sz_coff_path,
+		    u32 flags, struct cod_libraryobj **lib_obj)
+{
+	int status = 0;
+	struct cod_libraryobj *lib = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hmgr);
+	DBC_REQUIRE(sz_coff_path != NULL);
+	DBC_REQUIRE(flags == COD_NOLOAD || flags == COD_SYMB);
+	DBC_REQUIRE(lib_obj != NULL);
+
+	*lib_obj = NULL;
+
+	lib = kzalloc(sizeof(struct cod_libraryobj), GFP_KERNEL);
+	if (lib == NULL)
+		status = -ENOMEM;
+
+	if (!status) {
+		lib->cod_mgr = hmgr;
+		status = hmgr->fxns.open_fxn(hmgr->target, sz_coff_path, flags,
+					     &lib->dbll_lib);
+		if (!status)
+			*lib_obj = lib;
+	}
+
+	if (status)
+		pr_err("%s: error status 0x%x, sz_coff_path: %s flags: 0x%x\n",
+		       __func__, status, sz_coff_path, flags);
+	return status;
+}
+
+/*
+ *  ======== cod_open_base ========
+ *  Purpose:
+ *      Open base image for reading sections.
+ */
+int cod_open_base(struct cod_manager *hmgr, char *sz_coff_path,
+			 dbll_flags flags)
+{
+	int status = 0;
+	struct dbll_library_obj *lib;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hmgr);
+	DBC_REQUIRE(sz_coff_path != NULL);
+
+	/* if we previously opened a base image, close it now */
+	if (hmgr->base_lib) {
+		if (hmgr->loaded) {
+			hmgr->fxns.unload_fxn(hmgr->base_lib, &hmgr->attrs);
+			hmgr->loaded = false;
+		}
+		hmgr->fxns.close_fxn(hmgr->base_lib);
+		hmgr->base_lib = NULL;
+	}
+	status = hmgr->fxns.open_fxn(hmgr->target, sz_coff_path, flags, &lib);
+	if (!status) {
+		/* hang onto the library for subsequent sym table usage */
+		hmgr->base_lib = lib;
+		strncpy(hmgr->sz_zl_file, sz_coff_path, COD_MAXPATHLENGTH - 1);
+		hmgr->sz_zl_file[COD_MAXPATHLENGTH - 1] = '\0';
+	}
+
+	if (status)
+		pr_err("%s: error status 0x%x sz_coff_path: %s\n", __func__,
+		       status, sz_coff_path);
+	return status;
+}
+
+/*
+ *  ======== cod_read_section ========
+ *  Purpose:
+ *      Retrieve the content of a code section given the section name.
+ */
+int cod_read_section(struct cod_libraryobj *lib, char *str_sect,
+			    char *str_content, u32 content_size)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(lib != NULL);
+	DBC_REQUIRE(lib->cod_mgr);
+	DBC_REQUIRE(str_sect != NULL);
+	DBC_REQUIRE(str_content != NULL);
+
+	if (lib != NULL)
+		status =
+		    lib->cod_mgr->fxns.read_sect_fxn(lib->dbll_lib, str_sect,
+						     str_content, content_size);
+	else
+		status = -ESPIPE;
+
+	return status;
+}
+
+/*
+ *  ======== no_op ========
+ *  Purpose:
+ *      No Operation.
+ *
+ */
+static bool no_op(void)
+{
+	return true;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/dbll.c b/drivers/staging/tidspbridge/pmgr/dbll.c
new file mode 100644
index 00000000000..23406386f61
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dbll.c
@@ -0,0 +1,1585 @@
+/*
+ * dbll.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+#include <dspbridge/gh.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+
+/* Dynamic loader library interface */
+#include <dspbridge/dynamic_loader.h>
+#include <dspbridge/getsection.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dbll.h>
+#include <dspbridge/rmm.h>
+
+/* Number of buckets for symbol hash table */
+#define MAXBUCKETS 211
+
+/* Max buffer length */
+#define MAXEXPR 128
+
+#define DOFF_ALIGN(x) (((x) + 3) & ~3UL)
+
+/*
+ *  ======== struct dbll_tar_obj* ========
+ *  A target may have one or more libraries of symbols/code/data loaded
+ *  onto it, where a library is simply the symbols/code/data contained
+ *  in a DOFF file.
+ */
+/*
+ *  ======== dbll_tar_obj ========
+ */
+struct dbll_tar_obj {
+	struct dbll_attrs attrs;
+	struct dbll_library_obj *head;	/* List of all opened libraries */
+};
+
+/*
+ *  The following 4 typedefs are "super classes" of the dynamic loader
+ *  library types used in dynamic loader functions (dynamic_loader.h).
+ */
+/*
+ *  ======== dbll_stream ========
+ *  Contains dynamic_loader_stream
+ */
+struct dbll_stream {
+	struct dynamic_loader_stream dl_stream;
+	struct dbll_library_obj *lib;
+};
+
+/*
+ *  ======== ldr_symbol ========
+ */
+struct ldr_symbol {
+	struct dynamic_loader_sym dl_symbol;
+	struct dbll_library_obj *lib;
+};
+
+/*
+ *  ======== dbll_alloc ========
+ */
+struct dbll_alloc {
+	struct dynamic_loader_allocate dl_alloc;
+	struct dbll_library_obj *lib;
+};
+
+/*
+ *  ======== dbll_init_obj ========
+ */
+struct dbll_init_obj {
+	struct dynamic_loader_initialize dl_init;
+	struct dbll_library_obj *lib;
+};
+
+/*
+ *  ======== DBLL_Library ========
+ *  A library handle is returned by DBLL_Open() and is passed to dbll_load()
+ *  to load symbols/code/data, and to dbll_unload(), to remove the
+ *  symbols/code/data loaded by dbll_load().
+ */
+
+/*
+ *  ======== dbll_library_obj ========
+ */
+struct dbll_library_obj {
+	struct dbll_library_obj *next;	/* Next library in target's list */
+	struct dbll_library_obj *prev;	/* Previous in the list */
+	struct dbll_tar_obj *target_obj;	/* target for this library */
+
+	/* Objects needed by dynamic loader */
+	struct dbll_stream stream;
+	struct ldr_symbol symbol;
+	struct dbll_alloc allocate;
+	struct dbll_init_obj init;
+	void *dload_mod_obj;
+
+	char *file_name;	/* COFF file name */
+	void *fp;		/* Opaque file handle */
+	u32 entry;		/* Entry point */
+	void *desc;	/* desc of DOFF file loaded */
+	u32 open_ref;		/* Number of times opened */
+	u32 load_ref;		/* Number of times loaded */
+	struct gh_t_hash_tab *sym_tab;	/* Hash table of symbols */
+	u32 ul_pos;
+};
+
+/*
+ *  ======== dbll_symbol ========
+ */
+struct dbll_symbol {
+	struct dbll_sym_val value;
+	char *name;
+};
+
+static void dof_close(struct dbll_library_obj *zl_lib);
+static int dof_open(struct dbll_library_obj *zl_lib);
+static s32 no_op(struct dynamic_loader_initialize *thisptr, void *bufr,
+		 ldr_addr locn, struct ldr_section_info *info,
+		 unsigned bytsize);
+
+/*
+ *  Functions called by dynamic loader
+ *
+ */
+/* dynamic_loader_stream */
+static int dbll_read_buffer(struct dynamic_loader_stream *this, void *buffer,
+			    unsigned bufsize);
+static int dbll_set_file_posn(struct dynamic_loader_stream *this,
+			      unsigned int pos);
+/* dynamic_loader_sym */
+static struct dynload_symbol *dbll_find_symbol(struct dynamic_loader_sym *this,
+					       const char *name);
+static struct dynload_symbol *dbll_add_to_symbol_table(struct dynamic_loader_sym
+						       *this, const char *name,
+						       unsigned module_id);
+static struct dynload_symbol *find_in_symbol_table(struct dynamic_loader_sym
+						   *this, const char *name,
+						   unsigned moduleid);
+static void dbll_purge_symbol_table(struct dynamic_loader_sym *this,
+				    unsigned module_id);
+static void *allocate(struct dynamic_loader_sym *this, unsigned memsize);
+static void deallocate(struct dynamic_loader_sym *this, void *mem_ptr);
+static void dbll_err_report(struct dynamic_loader_sym *this, const char *errstr,
+			    va_list args);
+/* dynamic_loader_allocate */
+static int dbll_rmm_alloc(struct dynamic_loader_allocate *this,
+			  struct ldr_section_info *info, unsigned align);
+static void rmm_dealloc(struct dynamic_loader_allocate *this,
+			struct ldr_section_info *info);
+
+/* dynamic_loader_initialize */
+static int connect(struct dynamic_loader_initialize *this);
+static int read_mem(struct dynamic_loader_initialize *this, void *buf,
+		    ldr_addr addr, struct ldr_section_info *info,
+		    unsigned bytes);
+static int write_mem(struct dynamic_loader_initialize *this, void *buf,
+		     ldr_addr addr, struct ldr_section_info *info,
+		     unsigned nbytes);
+static int fill_mem(struct dynamic_loader_initialize *this, ldr_addr addr,
+		    struct ldr_section_info *info, unsigned bytes,
+		    unsigned val);
+static int execute(struct dynamic_loader_initialize *this, ldr_addr start);
+static void release(struct dynamic_loader_initialize *this);
+
+/* symbol table hash functions */
+static u16 name_hash(void *key, u16 max_bucket);
+static bool name_match(void *key, void *sp);
+static void sym_delete(void *value);
+
+static u32 refs;		/* module reference count */
+
+/* Symbol Redefinition */
+static int redefined_symbol;
+static int gbl_search = 1;
+
+/*
+ *  ======== dbll_close ========
+ */
+void dbll_close(struct dbll_library_obj *zl_lib)
+{
+	struct dbll_tar_obj *zl_target;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(zl_lib->open_ref > 0);
+	zl_target = zl_lib->target_obj;
+	zl_lib->open_ref--;
+	if (zl_lib->open_ref == 0) {
+		/* Remove library from list */
+		if (zl_target->head == zl_lib)
+			zl_target->head = zl_lib->next;
+
+		if (zl_lib->prev)
+			(zl_lib->prev)->next = zl_lib->next;
+
+		if (zl_lib->next)
+			(zl_lib->next)->prev = zl_lib->prev;
+
+		/* Free DOF resources */
+		dof_close(zl_lib);
+		kfree(zl_lib->file_name);
+
+		/* remove symbols from symbol table */
+		if (zl_lib->sym_tab)
+			gh_delete(zl_lib->sym_tab);
+
+		/* remove the library object itself */
+		kfree(zl_lib);
+		zl_lib = NULL;
+	}
+}
+
+/*
+ *  ======== dbll_create ========
+ */
+int dbll_create(struct dbll_tar_obj **target_obj,
+		       struct dbll_attrs *pattrs)
+{
+	struct dbll_tar_obj *pzl_target;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pattrs != NULL);
+	DBC_REQUIRE(target_obj != NULL);
+
+	/* Allocate DBL target object */
+	pzl_target = kzalloc(sizeof(struct dbll_tar_obj), GFP_KERNEL);
+	if (target_obj != NULL) {
+		if (pzl_target == NULL) {
+			*target_obj = NULL;
+			status = -ENOMEM;
+		} else {
+			pzl_target->attrs = *pattrs;
+			*target_obj = (struct dbll_tar_obj *)pzl_target;
+		}
+		DBC_ENSURE((!status && *target_obj) ||
+				(status && *target_obj == NULL));
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dbll_delete ========
+ */
+void dbll_delete(struct dbll_tar_obj *target)
+{
+	struct dbll_tar_obj *zl_target = (struct dbll_tar_obj *)target;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_target);
+
+	if (zl_target != NULL)
+		kfree(zl_target);
+
+}
+
+/*
+ *  ======== dbll_exit ========
+ *  Discontinue usage of DBL module.
+ */
+void dbll_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	if (refs == 0)
+		gh_exit();
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== dbll_get_addr ========
+ *  Get address of name in the specified library.
+ */
+bool dbll_get_addr(struct dbll_library_obj *zl_lib, char *name,
+		   struct dbll_sym_val **sym_val)
+{
+	struct dbll_symbol *sym;
+	bool status = false;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(name != NULL);
+	DBC_REQUIRE(sym_val != NULL);
+	DBC_REQUIRE(zl_lib->sym_tab != NULL);
+
+	sym = (struct dbll_symbol *)gh_find(zl_lib->sym_tab, name);
+	if (sym != NULL) {
+		*sym_val = &sym->value;
+		status = true;
+	}
+
+	dev_dbg(bridge, "%s: lib: %p name: %s paddr: %p, status 0x%x\n",
+		__func__, zl_lib, name, sym_val, status);
+	return status;
+}
+
+/*
+ *  ======== dbll_get_attrs ========
+ *  Retrieve the attributes of the target.
+ */
+void dbll_get_attrs(struct dbll_tar_obj *target, struct dbll_attrs *pattrs)
+{
+	struct dbll_tar_obj *zl_target = (struct dbll_tar_obj *)target;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_target);
+	DBC_REQUIRE(pattrs != NULL);
+
+	if ((pattrs != NULL) && (zl_target != NULL))
+		*pattrs = zl_target->attrs;
+
+}
+
+/*
+ *  ======== dbll_get_c_addr ========
+ *  Get address of a "C" name in the specified library.
+ */
+bool dbll_get_c_addr(struct dbll_library_obj *zl_lib, char *name,
+		     struct dbll_sym_val **sym_val)
+{
+	struct dbll_symbol *sym;
+	char cname[MAXEXPR + 1];
+	bool status = false;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(sym_val != NULL);
+	DBC_REQUIRE(zl_lib->sym_tab != NULL);
+	DBC_REQUIRE(name != NULL);
+
+	cname[0] = '_';
+
+	strncpy(cname + 1, name, sizeof(cname) - 2);
+	cname[MAXEXPR] = '\0';	/* insure '\0' string termination */
+
+	/* Check for C name, if not found */
+	sym = (struct dbll_symbol *)gh_find(zl_lib->sym_tab, cname);
+
+	if (sym != NULL) {
+		*sym_val = &sym->value;
+		status = true;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dbll_get_sect ========
+ *  Get the base address and size (in bytes) of a COFF section.
+ */
+int dbll_get_sect(struct dbll_library_obj *lib, char *name, u32 *paddr,
+			 u32 *psize)
+{
+	u32 byte_size;
+	bool opened_doff = false;
+	const struct ldr_section_info *sect = NULL;
+	struct dbll_library_obj *zl_lib = (struct dbll_library_obj *)lib;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(name != NULL);
+	DBC_REQUIRE(paddr != NULL);
+	DBC_REQUIRE(psize != NULL);
+	DBC_REQUIRE(zl_lib);
+
+	/* If DOFF file is not open, we open it. */
+	if (zl_lib != NULL) {
+		if (zl_lib->fp == NULL) {
+			status = dof_open(zl_lib);
+			if (!status)
+				opened_doff = true;
+
+		} else {
+			(*(zl_lib->target_obj->attrs.fseek)) (zl_lib->fp,
+							      zl_lib->ul_pos,
+							      SEEK_SET);
+		}
+	} else {
+		status = -EFAULT;
+	}
+	if (!status) {
+		byte_size = 1;
+		if (dload_get_section_info(zl_lib->desc, name, &sect)) {
+			*paddr = sect->load_addr;
+			*psize = sect->size * byte_size;
+			/* Make sure size is even for good swap */
+			if (*psize % 2)
+				(*psize)++;
+
+			/* Align size */
+			*psize = DOFF_ALIGN(*psize);
+		} else {
+			status = -ENXIO;
+		}
+	}
+	if (opened_doff) {
+		dof_close(zl_lib);
+		opened_doff = false;
+	}
+
+	dev_dbg(bridge, "%s: lib: %p name: %s paddr: %p psize: %p, "
+		"status 0x%x\n", __func__, lib, name, paddr, psize, status);
+
+	return status;
+}
+
+/*
+ *  ======== dbll_init ========
+ */
+bool dbll_init(void)
+{
+	DBC_REQUIRE(refs >= 0);
+
+	if (refs == 0)
+		gh_init();
+
+	refs++;
+
+	return true;
+}
+
+/*
+ *  ======== dbll_load ========
+ */
+int dbll_load(struct dbll_library_obj *lib, dbll_flags flags,
+		     struct dbll_attrs *attrs, u32 *entry)
+{
+	struct dbll_library_obj *zl_lib = (struct dbll_library_obj *)lib;
+	struct dbll_tar_obj *dbzl;
+	bool got_symbols = true;
+	s32 err;
+	int status = 0;
+	bool opened_doff = false;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(entry != NULL);
+	DBC_REQUIRE(attrs != NULL);
+
+	/*
+	 *  Load if not already loaded.
+	 */
+	if (zl_lib->load_ref == 0 || !(flags & DBLL_DYNAMIC)) {
+		dbzl = zl_lib->target_obj;
+		dbzl->attrs = *attrs;
+		/* Create a hash table for symbols if not already created */
+		if (zl_lib->sym_tab == NULL) {
+			got_symbols = false;
+			zl_lib->sym_tab = gh_create(MAXBUCKETS,
+						    sizeof(struct dbll_symbol),
+						    name_hash,
+						    name_match, sym_delete);
+			if (zl_lib->sym_tab == NULL)
+				status = -ENOMEM;
+
+		}
+		/*
+		 *  Set up objects needed by the dynamic loader
+		 */
+		/* Stream */
+		zl_lib->stream.dl_stream.read_buffer = dbll_read_buffer;
+		zl_lib->stream.dl_stream.set_file_posn = dbll_set_file_posn;
+		zl_lib->stream.lib = zl_lib;
+		/* Symbol */
+		zl_lib->symbol.dl_symbol.find_matching_symbol =
+		    dbll_find_symbol;
+		if (got_symbols) {
+			zl_lib->symbol.dl_symbol.add_to_symbol_table =
+			    find_in_symbol_table;
+		} else {
+			zl_lib->symbol.dl_symbol.add_to_symbol_table =
+			    dbll_add_to_symbol_table;
+		}
+		zl_lib->symbol.dl_symbol.purge_symbol_table =
+		    dbll_purge_symbol_table;
+		zl_lib->symbol.dl_symbol.dload_allocate = allocate;
+		zl_lib->symbol.dl_symbol.dload_deallocate = deallocate;
+		zl_lib->symbol.dl_symbol.error_report = dbll_err_report;
+		zl_lib->symbol.lib = zl_lib;
+		/* Allocate */
+		zl_lib->allocate.dl_alloc.dload_allocate = dbll_rmm_alloc;
+		zl_lib->allocate.dl_alloc.dload_deallocate = rmm_dealloc;
+		zl_lib->allocate.lib = zl_lib;
+		/* Init */
+		zl_lib->init.dl_init.connect = connect;
+		zl_lib->init.dl_init.readmem = read_mem;
+		zl_lib->init.dl_init.writemem = write_mem;
+		zl_lib->init.dl_init.fillmem = fill_mem;
+		zl_lib->init.dl_init.execute = execute;
+		zl_lib->init.dl_init.release = release;
+		zl_lib->init.lib = zl_lib;
+		/* If COFF file is not open, we open it. */
+		if (zl_lib->fp == NULL) {
+			status = dof_open(zl_lib);
+			if (!status)
+				opened_doff = true;
+
+		}
+		if (!status) {
+			zl_lib->ul_pos = (*(zl_lib->target_obj->attrs.ftell))
+			    (zl_lib->fp);
+			/* Reset file cursor */
+			(*(zl_lib->target_obj->attrs.fseek)) (zl_lib->fp,
+							      (long)0,
+							      SEEK_SET);
+			symbols_reloaded = true;
+			/* The 5th argument, DLOAD_INITBSS, tells the DLL
+			 * module to zero-init all BSS sections.  In general,
+			 * this is not necessary and also increases load time.
+			 * We may want to make this configurable by the user */
+			err = dynamic_load_module(&zl_lib->stream.dl_stream,
+						  &zl_lib->symbol.dl_symbol,
+						  &zl_lib->allocate.dl_alloc,
+						  &zl_lib->init.dl_init,
+						  DLOAD_INITBSS,
+						  &zl_lib->dload_mod_obj);
+
+			if (err != 0) {
+				status = -EILSEQ;
+			} else if (redefined_symbol) {
+				zl_lib->load_ref++;
+				dbll_unload(zl_lib, (struct dbll_attrs *)attrs);
+				redefined_symbol = false;
+				status = -EILSEQ;
+			} else {
+				*entry = zl_lib->entry;
+			}
+		}
+	}
+	if (!status)
+		zl_lib->load_ref++;
+
+	/* Clean up DOFF resources */
+	if (opened_doff)
+		dof_close(zl_lib);
+
+	DBC_ENSURE(status || zl_lib->load_ref > 0);
+
+	dev_dbg(bridge, "%s: lib: %p flags: 0x%x entry: %p, status 0x%x\n",
+		__func__, lib, flags, entry, status);
+
+	return status;
+}
+
+/*
+ *  ======== dbll_load_sect ========
+ *  Not supported for COFF.
+ */
+int dbll_load_sect(struct dbll_library_obj *zl_lib, char *sec_name,
+			  struct dbll_attrs *attrs)
+{
+	DBC_REQUIRE(zl_lib);
+
+	return -ENOSYS;
+}
+
+/*
+ *  ======== dbll_open ========
+ */
+int dbll_open(struct dbll_tar_obj *target, char *file, dbll_flags flags,
+		     struct dbll_library_obj **lib_obj)
+{
+	struct dbll_tar_obj *zl_target = (struct dbll_tar_obj *)target;
+	struct dbll_library_obj *zl_lib = NULL;
+	s32 err;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_target);
+	DBC_REQUIRE(zl_target->attrs.fopen != NULL);
+	DBC_REQUIRE(file != NULL);
+	DBC_REQUIRE(lib_obj != NULL);
+
+	zl_lib = zl_target->head;
+	while (zl_lib != NULL) {
+		if (strcmp(zl_lib->file_name, file) == 0) {
+			/* Library is already opened */
+			zl_lib->open_ref++;
+			break;
+		}
+		zl_lib = zl_lib->next;
+	}
+	if (zl_lib == NULL) {
+		/* Allocate DBL library object */
+		zl_lib = kzalloc(sizeof(struct dbll_library_obj), GFP_KERNEL);
+		if (zl_lib == NULL) {
+			status = -ENOMEM;
+		} else {
+			zl_lib->ul_pos = 0;
+			/* Increment ref count to allow close on failure
+			 * later on */
+			zl_lib->open_ref++;
+			zl_lib->target_obj = zl_target;
+			/* Keep a copy of the file name */
+			zl_lib->file_name = kzalloc(strlen(file) + 1,
+							GFP_KERNEL);
+			if (zl_lib->file_name == NULL) {
+				status = -ENOMEM;
+			} else {
+				strncpy(zl_lib->file_name, file,
+					strlen(file) + 1);
+			}
+			zl_lib->sym_tab = NULL;
+		}
+	}
+	/*
+	 *  Set up objects needed by the dynamic loader
+	 */
+	if (status)
+		goto func_cont;
+
+	/* Stream */
+	zl_lib->stream.dl_stream.read_buffer = dbll_read_buffer;
+	zl_lib->stream.dl_stream.set_file_posn = dbll_set_file_posn;
+	zl_lib->stream.lib = zl_lib;
+	/* Symbol */
+	zl_lib->symbol.dl_symbol.add_to_symbol_table = dbll_add_to_symbol_table;
+	zl_lib->symbol.dl_symbol.find_matching_symbol = dbll_find_symbol;
+	zl_lib->symbol.dl_symbol.purge_symbol_table = dbll_purge_symbol_table;
+	zl_lib->symbol.dl_symbol.dload_allocate = allocate;
+	zl_lib->symbol.dl_symbol.dload_deallocate = deallocate;
+	zl_lib->symbol.dl_symbol.error_report = dbll_err_report;
+	zl_lib->symbol.lib = zl_lib;
+	/* Allocate */
+	zl_lib->allocate.dl_alloc.dload_allocate = dbll_rmm_alloc;
+	zl_lib->allocate.dl_alloc.dload_deallocate = rmm_dealloc;
+	zl_lib->allocate.lib = zl_lib;
+	/* Init */
+	zl_lib->init.dl_init.connect = connect;
+	zl_lib->init.dl_init.readmem = read_mem;
+	zl_lib->init.dl_init.writemem = write_mem;
+	zl_lib->init.dl_init.fillmem = fill_mem;
+	zl_lib->init.dl_init.execute = execute;
+	zl_lib->init.dl_init.release = release;
+	zl_lib->init.lib = zl_lib;
+	if (!status && zl_lib->fp == NULL)
+		status = dof_open(zl_lib);
+
+	zl_lib->ul_pos = (*(zl_lib->target_obj->attrs.ftell)) (zl_lib->fp);
+	(*(zl_lib->target_obj->attrs.fseek)) (zl_lib->fp, (long)0, SEEK_SET);
+	/* Create a hash table for symbols if flag is set */
+	if (zl_lib->sym_tab != NULL || !(flags & DBLL_SYMB))
+		goto func_cont;
+
+	zl_lib->sym_tab =
+	    gh_create(MAXBUCKETS, sizeof(struct dbll_symbol), name_hash,
+		      name_match, sym_delete);
+	if (zl_lib->sym_tab == NULL) {
+		status = -ENOMEM;
+	} else {
+		/* Do a fake load to get symbols - set write func to no_op */
+		zl_lib->init.dl_init.writemem = no_op;
+		err = dynamic_open_module(&zl_lib->stream.dl_stream,
+					  &zl_lib->symbol.dl_symbol,
+					  &zl_lib->allocate.dl_alloc,
+					  &zl_lib->init.dl_init, 0,
+					  &zl_lib->dload_mod_obj);
+		if (err != 0) {
+			status = -EILSEQ;
+		} else {
+			/* Now that we have the symbol table, we can unload */
+			err = dynamic_unload_module(zl_lib->dload_mod_obj,
+						    &zl_lib->symbol.dl_symbol,
+						    &zl_lib->allocate.dl_alloc,
+						    &zl_lib->init.dl_init);
+			if (err != 0)
+				status = -EILSEQ;
+
+			zl_lib->dload_mod_obj = NULL;
+		}
+	}
+func_cont:
+	if (!status) {
+		if (zl_lib->open_ref == 1) {
+			/* First time opened - insert in list */
+			if (zl_target->head)
+				(zl_target->head)->prev = zl_lib;
+
+			zl_lib->prev = NULL;
+			zl_lib->next = zl_target->head;
+			zl_target->head = zl_lib;
+		}
+		*lib_obj = (struct dbll_library_obj *)zl_lib;
+	} else {
+		*lib_obj = NULL;
+		if (zl_lib != NULL)
+			dbll_close((struct dbll_library_obj *)zl_lib);
+
+	}
+	DBC_ENSURE((!status && (zl_lib->open_ref > 0) && *lib_obj)
+				|| (status && *lib_obj == NULL));
+
+	dev_dbg(bridge, "%s: target: %p file: %s lib_obj: %p, status 0x%x\n",
+		__func__, target, file, lib_obj, status);
+
+	return status;
+}
+
+/*
+ *  ======== dbll_read_sect ========
+ *  Get the content of a COFF section.
+ */
+int dbll_read_sect(struct dbll_library_obj *lib, char *name,
+			  char *buf, u32 size)
+{
+	struct dbll_library_obj *zl_lib = (struct dbll_library_obj *)lib;
+	bool opened_doff = false;
+	u32 byte_size;		/* size of bytes */
+	u32 ul_sect_size;	/* size of section */
+	const struct ldr_section_info *sect = NULL;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(name != NULL);
+	DBC_REQUIRE(buf != NULL);
+	DBC_REQUIRE(size != 0);
+
+	/* If DOFF file is not open, we open it. */
+	if (zl_lib != NULL) {
+		if (zl_lib->fp == NULL) {
+			status = dof_open(zl_lib);
+			if (!status)
+				opened_doff = true;
+
+		} else {
+			(*(zl_lib->target_obj->attrs.fseek)) (zl_lib->fp,
+							      zl_lib->ul_pos,
+							      SEEK_SET);
+		}
+	} else {
+		status = -EFAULT;
+	}
+	if (status)
+		goto func_cont;
+
+	byte_size = 1;
+	if (!dload_get_section_info(zl_lib->desc, name, &sect)) {
+		status = -ENXIO;
+		goto func_cont;
+	}
+	/*
+	 * Ensure the supplied buffer size is sufficient to store
+	 * the section buf to be read.
+	 */
+	ul_sect_size = sect->size * byte_size;
+	/* Make sure size is even for good swap */
+	if (ul_sect_size % 2)
+		ul_sect_size++;
+
+	/* Align size */
+	ul_sect_size = DOFF_ALIGN(ul_sect_size);
+	if (ul_sect_size > size) {
+		status = -EPERM;
+	} else {
+		if (!dload_get_section(zl_lib->desc, sect, buf))
+			status = -EBADF;
+
+	}
+func_cont:
+	if (opened_doff) {
+		dof_close(zl_lib);
+		opened_doff = false;
+	}
+
+	dev_dbg(bridge, "%s: lib: %p name: %s buf: %p size: 0x%x, "
+		"status 0x%x\n", __func__, lib, name, buf, size, status);
+	return status;
+}
+
+/*
+ *  ======== dbll_set_attrs ========
+ *  Set the attributes of the target.
+ */
+void dbll_set_attrs(struct dbll_tar_obj *target, struct dbll_attrs *pattrs)
+{
+	struct dbll_tar_obj *zl_target = (struct dbll_tar_obj *)target;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_target);
+	DBC_REQUIRE(pattrs != NULL);
+
+	if ((pattrs != NULL) && (zl_target != NULL))
+		zl_target->attrs = *pattrs;
+
+}
+
+/*
+ *  ======== dbll_unload ========
+ */
+void dbll_unload(struct dbll_library_obj *lib, struct dbll_attrs *attrs)
+{
+	struct dbll_library_obj *zl_lib = (struct dbll_library_obj *)lib;
+	s32 err = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(zl_lib);
+	DBC_REQUIRE(zl_lib->load_ref > 0);
+	dev_dbg(bridge, "%s: lib: %p\n", __func__, lib);
+	zl_lib->load_ref--;
+	/* Unload only if reference count is 0 */
+	if (zl_lib->load_ref != 0)
+		goto func_end;
+
+	zl_lib->target_obj->attrs = *attrs;
+	if (zl_lib->dload_mod_obj) {
+		err = dynamic_unload_module(zl_lib->dload_mod_obj,
+					    &zl_lib->symbol.dl_symbol,
+					    &zl_lib->allocate.dl_alloc,
+					    &zl_lib->init.dl_init);
+		if (err != 0)
+			dev_dbg(bridge, "%s: failed: 0x%x\n", __func__, err);
+	}
+	/* remove symbols from symbol table */
+	if (zl_lib->sym_tab != NULL) {
+		gh_delete(zl_lib->sym_tab);
+		zl_lib->sym_tab = NULL;
+	}
+	/* delete DOFF desc since it holds *lots* of host OS
+	 * resources */
+	dof_close(zl_lib);
+func_end:
+	DBC_ENSURE(zl_lib->load_ref >= 0);
+}
+
+/*
+ *  ======== dbll_unload_sect ========
+ *  Not supported for COFF.
+ */
+int dbll_unload_sect(struct dbll_library_obj *lib, char *sec_name,
+			    struct dbll_attrs *attrs)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(sec_name != NULL);
+
+	return -ENOSYS;
+}
+
+/*
+ *  ======== dof_close ========
+ */
+static void dof_close(struct dbll_library_obj *zl_lib)
+{
+	if (zl_lib->desc) {
+		dload_module_close(zl_lib->desc);
+		zl_lib->desc = NULL;
+	}
+	/* close file */
+	if (zl_lib->fp) {
+		(zl_lib->target_obj->attrs.fclose) (zl_lib->fp);
+		zl_lib->fp = NULL;
+	}
+}
+
+/*
+ *  ======== dof_open ========
+ */
+static int dof_open(struct dbll_library_obj *zl_lib)
+{
+	void *open = *(zl_lib->target_obj->attrs.fopen);
+	int status = 0;
+
+	/* First open the file for the dynamic loader, then open COF */
+	zl_lib->fp =
+	    (void *)((dbll_f_open_fxn) (open)) (zl_lib->file_name, "rb");
+
+	/* Open DOFF module */
+	if (zl_lib->fp && zl_lib->desc == NULL) {
+		(*(zl_lib->target_obj->attrs.fseek)) (zl_lib->fp, (long)0,
+						      SEEK_SET);
+		zl_lib->desc =
+		    dload_module_open(&zl_lib->stream.dl_stream,
+				      &zl_lib->symbol.dl_symbol);
+		if (zl_lib->desc == NULL) {
+			(zl_lib->target_obj->attrs.fclose) (zl_lib->fp);
+			zl_lib->fp = NULL;
+			status = -EBADF;
+		}
+	} else {
+		status = -EBADF;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== name_hash ========
+ */
+static u16 name_hash(void *key, u16 max_bucket)
+{
+	u16 ret;
+	u16 hash;
+	char *name = (char *)key;
+
+	DBC_REQUIRE(name != NULL);
+
+	hash = 0;
+
+	while (*name) {
+		hash <<= 1;
+		hash ^= *name++;
+	}
+
+	ret = hash % max_bucket;
+
+	return ret;
+}
+
+/*
+ *  ======== name_match ========
+ */
+static bool name_match(void *key, void *sp)
+{
+	DBC_REQUIRE(key != NULL);
+	DBC_REQUIRE(sp != NULL);
+
+	if ((key != NULL) && (sp != NULL)) {
+		if (strcmp((char *)key, ((struct dbll_symbol *)sp)->name) ==
+		    0)
+			return true;
+	}
+	return false;
+}
+
+/*
+ *  ======== no_op ========
+ */
+static int no_op(struct dynamic_loader_initialize *thisptr, void *bufr,
+		 ldr_addr locn, struct ldr_section_info *info, unsigned bytsize)
+{
+	return 1;
+}
+
+/*
+ *  ======== sym_delete ========
+ */
+static void sym_delete(void *value)
+{
+	struct dbll_symbol *sp = (struct dbll_symbol *)value;
+
+	kfree(sp->name);
+}
+
+/*
+ *  Dynamic Loader Functions
+ */
+
+/* dynamic_loader_stream */
+/*
+ *  ======== dbll_read_buffer ========
+ */
+static int dbll_read_buffer(struct dynamic_loader_stream *this, void *buffer,
+			    unsigned bufsize)
+{
+	struct dbll_stream *pstream = (struct dbll_stream *)this;
+	struct dbll_library_obj *lib;
+	int bytes_read = 0;
+
+	DBC_REQUIRE(this != NULL);
+	lib = pstream->lib;
+	DBC_REQUIRE(lib);
+
+	if (lib != NULL) {
+		bytes_read =
+		    (*(lib->target_obj->attrs.fread)) (buffer, 1, bufsize,
+						       lib->fp);
+	}
+	return bytes_read;
+}
+
+/*
+ *  ======== dbll_set_file_posn ========
+ */
+static int dbll_set_file_posn(struct dynamic_loader_stream *this,
+			      unsigned int pos)
+{
+	struct dbll_stream *pstream = (struct dbll_stream *)this;
+	struct dbll_library_obj *lib;
+	int status = 0;		/* Success */
+
+	DBC_REQUIRE(this != NULL);
+	lib = pstream->lib;
+	DBC_REQUIRE(lib);
+
+	if (lib != NULL) {
+		status = (*(lib->target_obj->attrs.fseek)) (lib->fp, (long)pos,
+							    SEEK_SET);
+	}
+
+	return status;
+}
+
+/* dynamic_loader_sym */
+
+/*
+ *  ======== dbll_find_symbol ========
+ */
+static struct dynload_symbol *dbll_find_symbol(struct dynamic_loader_sym *this,
+					       const char *name)
+{
+	struct dynload_symbol *ret_sym;
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+	struct dbll_sym_val *dbll_sym = NULL;
+	bool status = false;	/* Symbol not found yet */
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+
+	if (lib != NULL) {
+		if (lib->target_obj->attrs.sym_lookup) {
+			/* Check current lib + base lib + dep lib +
+			 * persistent lib */
+			status = (*(lib->target_obj->attrs.sym_lookup))
+			    (lib->target_obj->attrs.sym_handle,
+			     lib->target_obj->attrs.sym_arg,
+			     lib->target_obj->attrs.rmm_handle, name,
+			     &dbll_sym);
+		} else {
+			/* Just check current lib for symbol */
+			status = dbll_get_addr((struct dbll_library_obj *)lib,
+					       (char *)name, &dbll_sym);
+			if (!status) {
+				status =
+				    dbll_get_c_addr((struct dbll_library_obj *)
+						    lib, (char *)name,
+						    &dbll_sym);
+			}
+		}
+	}
+
+	if (!status && gbl_search)
+		dev_dbg(bridge, "%s: Symbol not found: %s\n", __func__, name);
+
+	DBC_ASSERT((status && (dbll_sym != NULL))
+		   || (!status && (dbll_sym == NULL)));
+
+	ret_sym = (struct dynload_symbol *)dbll_sym;
+	return ret_sym;
+}
+
+/*
+ *  ======== find_in_symbol_table ========
+ */
+static struct dynload_symbol *find_in_symbol_table(struct dynamic_loader_sym
+						   *this, const char *name,
+						   unsigned moduleid)
+{
+	struct dynload_symbol *ret_sym;
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+	struct dbll_symbol *sym;
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+	DBC_REQUIRE(lib->sym_tab != NULL);
+
+	sym = (struct dbll_symbol *)gh_find(lib->sym_tab, (char *)name);
+
+	ret_sym = (struct dynload_symbol *)&sym->value;
+	return ret_sym;
+}
+
+/*
+ *  ======== dbll_add_to_symbol_table ========
+ */
+static struct dynload_symbol *dbll_add_to_symbol_table(struct dynamic_loader_sym
+						       *this, const char *name,
+						       unsigned module_id)
+{
+	struct dbll_symbol *sym_ptr = NULL;
+	struct dbll_symbol symbol;
+	struct dynload_symbol *dbll_sym = NULL;
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+	struct dynload_symbol *ret;
+
+	DBC_REQUIRE(this != NULL);
+	DBC_REQUIRE(name);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+
+	/* Check to see if symbol is already defined in symbol table */
+	if (!(lib->target_obj->attrs.base_image)) {
+		gbl_search = false;
+		dbll_sym = dbll_find_symbol(this, name);
+		gbl_search = true;
+		if (dbll_sym) {
+			redefined_symbol = true;
+			dev_dbg(bridge, "%s already defined in symbol table\n",
+				name);
+			return NULL;
+		}
+	}
+	/* Allocate string to copy symbol name */
+	symbol.name = kzalloc(strlen((char *const)name) + 1, GFP_KERNEL);
+	if (symbol.name == NULL)
+		return NULL;
+
+	if (symbol.name != NULL) {
+		/* Just copy name (value will be filled in by dynamic loader) */
+		strncpy(symbol.name, (char *const)name,
+			strlen((char *const)name) + 1);
+
+		/* Add symbol to symbol table */
+		sym_ptr =
+		    (struct dbll_symbol *)gh_insert(lib->sym_tab, (void *)name,
+						    (void *)&symbol);
+		if (sym_ptr == NULL)
+			kfree(symbol.name);
+
+	}
+	if (sym_ptr != NULL)
+		ret = (struct dynload_symbol *)&sym_ptr->value;
+	else
+		ret = NULL;
+
+	return ret;
+}
+
+/*
+ *  ======== dbll_purge_symbol_table ========
+ */
+static void dbll_purge_symbol_table(struct dynamic_loader_sym *this,
+				    unsigned module_id)
+{
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+
+	/* May not need to do anything */
+}
+
+/*
+ *  ======== allocate ========
+ */
+static void *allocate(struct dynamic_loader_sym *this, unsigned memsize)
+{
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+	void *buf;
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+
+	buf = kzalloc(memsize, GFP_KERNEL);
+
+	return buf;
+}
+
+/*
+ *  ======== deallocate ========
+ */
+static void deallocate(struct dynamic_loader_sym *this, void *mem_ptr)
+{
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+
+	kfree(mem_ptr);
+}
+
+/*
+ *  ======== dbll_err_report ========
+ */
+static void dbll_err_report(struct dynamic_loader_sym *this, const char *errstr,
+			    va_list args)
+{
+	struct ldr_symbol *ldr_sym = (struct ldr_symbol *)this;
+	struct dbll_library_obj *lib;
+	char temp_buf[MAXEXPR];
+
+	DBC_REQUIRE(this != NULL);
+	lib = ldr_sym->lib;
+	DBC_REQUIRE(lib);
+	vsnprintf((char *)temp_buf, MAXEXPR, (char *)errstr, args);
+	dev_dbg(bridge, "%s\n", temp_buf);
+}
+
+/* dynamic_loader_allocate */
+
+/*
+ *  ======== dbll_rmm_alloc ========
+ */
+static int dbll_rmm_alloc(struct dynamic_loader_allocate *this,
+			  struct ldr_section_info *info, unsigned align)
+{
+	struct dbll_alloc *dbll_alloc_obj = (struct dbll_alloc *)this;
+	struct dbll_library_obj *lib;
+	int status = 0;
+	u32 mem_sect_type;
+	struct rmm_addr rmm_addr_obj;
+	s32 ret = true;
+	unsigned stype = DLOAD_SECTION_TYPE(info->type);
+	char *token = NULL;
+	char *sz_sec_last_token = NULL;
+	char *sz_last_token = NULL;
+	char *sz_sect_name = NULL;
+	char *psz_cur;
+	s32 token_len = 0;
+	s32 seg_id = -1;
+	s32 req = -1;
+	s32 count = 0;
+	u32 alloc_size = 0;
+	u32 run_addr_flag = 0;
+
+	DBC_REQUIRE(this != NULL);
+	lib = dbll_alloc_obj->lib;
+	DBC_REQUIRE(lib);
+
+	mem_sect_type =
+	    (stype == DLOAD_TEXT) ? DBLL_CODE : (stype ==
+						 DLOAD_BSS) ? DBLL_BSS :
+	    DBLL_DATA;
+
+	/* Attempt to extract the segment ID and requirement information from
+	   the name of the section */
+	DBC_REQUIRE(info->name);
+	token_len = strlen((char *)(info->name)) + 1;
+
+	sz_sect_name = kzalloc(token_len, GFP_KERNEL);
+	sz_last_token = kzalloc(token_len, GFP_KERNEL);
+	sz_sec_last_token = kzalloc(token_len, GFP_KERNEL);
+
+	if (sz_sect_name == NULL || sz_sec_last_token == NULL ||
+	    sz_last_token == NULL) {
+		status = -ENOMEM;
+		goto func_cont;
+	}
+	strncpy(sz_sect_name, (char *)(info->name), token_len);
+	psz_cur = sz_sect_name;
+	while ((token = strsep(&psz_cur, ":")) && *token != '\0') {
+		strncpy(sz_sec_last_token, sz_last_token,
+			strlen(sz_last_token) + 1);
+		strncpy(sz_last_token, token, strlen(token) + 1);
+		token = strsep(&psz_cur, ":");
+		count++;	/* optimizes processing */
+	}
+	/* If token is 0 or 1, and sz_sec_last_token is DYN_DARAM or DYN_SARAM,
+	   or DYN_EXTERNAL, then mem granularity information is present
+	   within the section name - only process if there are at least three
+	   tokens within the section name (just a minor optimization) */
+	if (count >= 3)
+		strict_strtol(sz_last_token, 10, (long *)&req);
+
+	if ((req == 0) || (req == 1)) {
+		if (strcmp(sz_sec_last_token, "DYN_DARAM") == 0) {
+			seg_id = 0;
+		} else {
+			if (strcmp(sz_sec_last_token, "DYN_SARAM") == 0) {
+				seg_id = 1;
+			} else {
+				if (strcmp(sz_sec_last_token,
+					   "DYN_EXTERNAL") == 0)
+					seg_id = 2;
+			}
+		}
+	}
+func_cont:
+	kfree(sz_sect_name);
+	sz_sect_name = NULL;
+	kfree(sz_last_token);
+	sz_last_token = NULL;
+	kfree(sz_sec_last_token);
+	sz_sec_last_token = NULL;
+
+	if (mem_sect_type == DBLL_CODE)
+		alloc_size = info->size + GEM_L1P_PREFETCH_SIZE;
+	else
+		alloc_size = info->size;
+
+	if (info->load_addr != info->run_addr)
+		run_addr_flag = 1;
+	/* TODO - ideally, we can pass the alignment requirement also
+	 * from here */
+	if (lib != NULL) {
+		status =
+		    (lib->target_obj->attrs.alloc) (lib->target_obj->attrs.
+						    rmm_handle, mem_sect_type,
+						    alloc_size, align,
+						    (u32 *) &rmm_addr_obj,
+						    seg_id, req, false);
+	}
+	if (status) {
+		ret = false;
+	} else {
+		/* RMM gives word address. Need to convert to byte address */
+		info->load_addr = rmm_addr_obj.addr * DSPWORDSIZE;
+		if (!run_addr_flag)
+			info->run_addr = info->load_addr;
+		info->context = (u32) rmm_addr_obj.segid;
+		dev_dbg(bridge, "%s: %s base = 0x%x len = 0x%x, "
+			"info->run_addr 0x%x, info->load_addr 0x%x\n",
+			__func__, info->name, info->load_addr / DSPWORDSIZE,
+			info->size / DSPWORDSIZE, info->run_addr,
+			info->load_addr);
+	}
+	return ret;
+}
+
+/*
+ *  ======== rmm_dealloc ========
+ */
+static void rmm_dealloc(struct dynamic_loader_allocate *this,
+			struct ldr_section_info *info)
+{
+	struct dbll_alloc *dbll_alloc_obj = (struct dbll_alloc *)this;
+	struct dbll_library_obj *lib;
+	u32 segid;
+	int status = 0;
+	unsigned stype = DLOAD_SECTION_TYPE(info->type);
+	u32 mem_sect_type;
+	u32 free_size = 0;
+
+	mem_sect_type =
+	    (stype == DLOAD_TEXT) ? DBLL_CODE : (stype ==
+						 DLOAD_BSS) ? DBLL_BSS :
+	    DBLL_DATA;
+	DBC_REQUIRE(this != NULL);
+	lib = dbll_alloc_obj->lib;
+	DBC_REQUIRE(lib);
+	/* segid was set by alloc function */
+	segid = (u32) info->context;
+	if (mem_sect_type == DBLL_CODE)
+		free_size = info->size + GEM_L1P_PREFETCH_SIZE;
+	else
+		free_size = info->size;
+	if (lib != NULL) {
+		status =
+		    (lib->target_obj->attrs.free) (lib->target_obj->attrs.
+						   sym_handle, segid,
+						   info->load_addr /
+						   DSPWORDSIZE, free_size,
+						   false);
+	}
+}
+
+/* dynamic_loader_initialize */
+/*
+ *  ======== connect ========
+ */
+static int connect(struct dynamic_loader_initialize *this)
+{
+	return true;
+}
+
+/*
+ *  ======== read_mem ========
+ *  This function does not need to be implemented.
+ */
+static int read_mem(struct dynamic_loader_initialize *this, void *buf,
+		    ldr_addr addr, struct ldr_section_info *info,
+		    unsigned nbytes)
+{
+	struct dbll_init_obj *init_obj = (struct dbll_init_obj *)this;
+	struct dbll_library_obj *lib;
+	int bytes_read = 0;
+
+	DBC_REQUIRE(this != NULL);
+	lib = init_obj->lib;
+	DBC_REQUIRE(lib);
+	/* Need bridge_brd_read function */
+	return bytes_read;
+}
+
+/*
+ *  ======== write_mem ========
+ */
+static int write_mem(struct dynamic_loader_initialize *this, void *buf,
+		     ldr_addr addr, struct ldr_section_info *info,
+		     unsigned bytes)
+{
+	struct dbll_init_obj *init_obj = (struct dbll_init_obj *)this;
+	struct dbll_library_obj *lib;
+	struct dbll_tar_obj *target_obj;
+	struct dbll_sect_info sect_info;
+	u32 mem_sect_type;
+	bool ret = true;
+
+	DBC_REQUIRE(this != NULL);
+	lib = init_obj->lib;
+	if (!lib)
+		return false;
+
+	target_obj = lib->target_obj;
+
+	mem_sect_type =
+	    (DLOAD_SECTION_TYPE(info->type) ==
+	     DLOAD_TEXT) ? DBLL_CODE : DBLL_DATA;
+	if (target_obj && target_obj->attrs.write) {
+		ret =
+		    (*target_obj->attrs.write) (target_obj->attrs.input_params,
+						addr, buf, bytes,
+						mem_sect_type);
+
+		if (target_obj->attrs.log_write) {
+			sect_info.name = info->name;
+			sect_info.sect_run_addr = info->run_addr;
+			sect_info.sect_load_addr = info->load_addr;
+			sect_info.size = info->size;
+			sect_info.type = mem_sect_type;
+			/* Pass the information about what we've written to
+			 * another module */
+			(*target_obj->attrs.log_write) (target_obj->attrs.
+							log_write_handle,
+							&sect_info, addr,
+							bytes);
+		}
+	}
+	return ret;
+}
+
+/*
+ *  ======== fill_mem ========
+ *  Fill bytes of memory at a given address with a given value by
+ *  writing from a buffer containing the given value.  Write in
+ *  sets of MAXEXPR (128) bytes to avoid large stack buffer issues.
+ */
+static int fill_mem(struct dynamic_loader_initialize *this, ldr_addr addr,
+		    struct ldr_section_info *info, unsigned bytes, unsigned val)
+{
+	bool ret = true;
+	char *pbuf;
+	struct dbll_library_obj *lib;
+	struct dbll_init_obj *init_obj = (struct dbll_init_obj *)this;
+
+	DBC_REQUIRE(this != NULL);
+	lib = init_obj->lib;
+	pbuf = NULL;
+	/* Pass the NULL pointer to write_mem to get the start address of Shared
+	   memory. This is a trick to just get the start address, there is no
+	   writing taking place with this Writemem
+	 */
+	if ((lib->target_obj->attrs.write) != (dbll_write_fxn) no_op)
+		write_mem(this, &pbuf, addr, info, 0);
+	if (pbuf)
+		memset(pbuf, val, bytes);
+
+	return ret;
+}
+
+/*
+ *  ======== execute ========
+ */
+static int execute(struct dynamic_loader_initialize *this, ldr_addr start)
+{
+	struct dbll_init_obj *init_obj = (struct dbll_init_obj *)this;
+	struct dbll_library_obj *lib;
+	bool ret = true;
+
+	DBC_REQUIRE(this != NULL);
+	lib = init_obj->lib;
+	DBC_REQUIRE(lib);
+	/* Save entry point */
+	if (lib != NULL)
+		lib->entry = (u32) start;
+
+	return ret;
+}
+
+/*
+ *  ======== release ========
+ */
+static void release(struct dynamic_loader_initialize *this)
+{
+}
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/**
+ *  find_symbol_context - Basic symbol context structure
+ * @address:		Symbol Adress
+ * @offset_range:		Offset range where the search for the DSP symbol
+ *			started.
+ * @cur_best_offset:	Best offset to start looking for the DSP symbol
+ * @sym_addr:		Address of the DSP symbol
+ * @name:		Symbol name
+ *
+ */
+struct find_symbol_context {
+	/* input */
+	u32 address;
+	u32 offset_range;
+	/* state */
+	u32 cur_best_offset;
+	/* output */
+	u32 sym_addr;
+	char name[120];
+};
+
+/**
+ * find_symbol_callback() - Validates symbol address and copies the symbol name
+ *			to the user data.
+ * @elem:		dsp library context
+ * @user_data:		Find symbol context
+ *
+ */
+void find_symbol_callback(void *elem, void *user_data)
+{
+	struct dbll_symbol *symbol = elem;
+	struct find_symbol_context *context = user_data;
+	u32 symbol_addr = symbol->value.value;
+	u32 offset = context->address - symbol_addr;
+
+	/*
+	 * Address given should be greater than symbol address,
+	 * symbol address should be  within specified range
+	 * and the offset should be better than previous one
+	 */
+	if (context->address >= symbol_addr && symbol_addr < (u32)-1 &&
+		offset < context->cur_best_offset) {
+		context->cur_best_offset = offset;
+		context->sym_addr = symbol_addr;
+		strncpy(context->name, symbol->name, sizeof(context->name));
+	}
+
+	return;
+}
+
+/**
+ * dbll_find_dsp_symbol() - This function retrieves the dsp symbol from the dsp binary.
+ * @zl_lib:		DSP binary obj library pointer
+ * @address:		Given address to find the dsp symbol
+ * @offset_range:		offset range to look for dsp symbol
+ * @sym_addr_output:	Symbol Output address
+ * @name_output:		String with the dsp symbol
+ *
+ * 	This function retrieves the dsp symbol from the dsp binary.
+ */
+bool dbll_find_dsp_symbol(struct dbll_library_obj *zl_lib, u32 address,
+				u32 offset_range, u32 *sym_addr_output,
+				char *name_output)
+{
+	bool status = false;
+	struct find_symbol_context context;
+
+	context.address = address;
+	context.offset_range = offset_range;
+	context.cur_best_offset = offset_range;
+	context.sym_addr = 0;
+	context.name[0] = '\0';
+
+	gh_iterate(zl_lib->sym_tab, find_symbol_callback, &context);
+
+	if (context.name[0]) {
+		status = true;
+		strcpy(name_output, context.name);
+		*sym_addr_output = context.sym_addr;
+	}
+
+	return status;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
new file mode 100644
index 00000000000..4ddf03d3b1a
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -0,0 +1,1151 @@
+/*
+ * dev.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implementation of Bridge Bridge driver device operations.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/ldr.h>
+#include <dspbridge/list.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/cod.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/proc.h>
+#include <dspbridge/dmm.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/mgr.h>
+#include <dspbridge/node.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/dspapi.h>	/* DSP API version info. */
+
+#include <dspbridge/chnl.h>
+#include <dspbridge/io.h>
+#include <dspbridge/msg.h>
+#include <dspbridge/cmm.h>
+#include <dspbridge/dspdeh.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+
+#define MAKEVERSION(major, minor)   (major * 10 + minor)
+#define BRD_API_VERSION		MAKEVERSION(BRD_API_MAJOR_VERSION,	\
+				BRD_API_MINOR_VERSION)
+
+/* The Bridge device object: */
+struct dev_object {
+	/* LST requires "link" to be first field! */
+	struct list_head link;	/* Link to next dev_object. */
+	u8 dev_type;		/* Device Type */
+	struct cfg_devnode *dev_node_obj;	/* Platform specific dev id */
+	/* Bridge Context Handle */
+	struct bridge_dev_context *hbridge_context;
+	/* Function interface to Bridge driver. */
+	struct bridge_drv_interface bridge_interface;
+	struct brd_object *lock_owner;	/* Client with exclusive access. */
+	struct cod_manager *cod_mgr;	/* Code manager handle. */
+	struct chnl_mgr *hchnl_mgr;	/* Channel manager. */
+	struct deh_mgr *hdeh_mgr;	/* DEH manager. */
+	struct msg_mgr *hmsg_mgr;	/* Message manager. */
+	struct io_mgr *hio_mgr;	/* IO manager (CHNL, msg_ctrl) */
+	struct cmm_object *hcmm_mgr;	/* SM memory manager. */
+	struct dmm_object *dmm_mgr;	/* Dynamic memory manager. */
+	struct ldr_module *module_obj;	/* Bridge Module handle. */
+	u32 word_size;		/* DSP word size: quick access. */
+	struct drv_object *hdrv_obj;	/* Driver Object */
+	struct lst_list *proc_list;	/* List of Proceeosr attached to
+					 * this device */
+	struct node_mgr *hnode_mgr;
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* Module reference count */
+
+/*  ----------------------------------- Function Prototypes */
+static int fxn_not_implemented(int arg, ...);
+static int init_cod_mgr(struct dev_object *dev_obj);
+static void store_interface_fxns(struct bridge_drv_interface *drv_fxns,
+				 struct bridge_drv_interface *intf_fxns);
+/*
+ *  ======== dev_brd_write_fxn ========
+ *  Purpose:
+ *      Exported function to be used as the COD write function.  This function
+ *      is passed a handle to a DEV_hObject, then calls the
+ *      device's bridge_brd_write() function.
+ */
+u32 dev_brd_write_fxn(void *arb, u32 dsp_add, void *host_buf,
+		      u32 ul_num_bytes, u32 mem_space)
+{
+	struct dev_object *dev_obj = (struct dev_object *)arb;
+	u32 ul_written = 0;
+	int status;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(host_buf != NULL);	/* Required of BrdWrite(). */
+	if (dev_obj) {
+		/* Require of BrdWrite() */
+		DBC_ASSERT(dev_obj->hbridge_context != NULL);
+		status = (*dev_obj->bridge_interface.pfn_brd_write) (
+					dev_obj->hbridge_context, host_buf,
+					dsp_add, ul_num_bytes, mem_space);
+		/* Special case of getting the address only */
+		if (ul_num_bytes == 0)
+			ul_num_bytes = 1;
+		if (!status)
+			ul_written = ul_num_bytes;
+
+	}
+	return ul_written;
+}
+
+/*
+ *  ======== dev_create_device ========
+ *  Purpose:
+ *      Called by the operating system to load the PM Bridge Driver for a
+ *      PM board (device).
+ */
+int dev_create_device(struct dev_object **device_obj,
+			     const char *driver_file_name,
+			     struct cfg_devnode *dev_node_obj)
+{
+	struct cfg_hostres *host_res;
+	struct ldr_module *module_obj = NULL;
+	struct bridge_drv_interface *drv_fxns = NULL;
+	struct dev_object *dev_obj = NULL;
+	struct chnl_mgrattrs mgr_attrs;
+	struct io_attrs io_mgr_attrs;
+	u32 num_windows;
+	struct drv_object *hdrv_obj = NULL;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(device_obj != NULL);
+	DBC_REQUIRE(driver_file_name != NULL);
+
+	status = drv_request_bridge_res_dsp((void *)&host_res);
+
+	if (status) {
+		dev_dbg(bridge, "%s: Failed to reserve bridge resources\n",
+			__func__);
+		goto leave;
+	}
+
+	/*  Get the Bridge driver interface functions */
+	bridge_drv_entry(&drv_fxns, driver_file_name);
+	if (cfg_get_object((u32 *) &hdrv_obj, REG_DRV_OBJECT)) {
+		/* don't propogate CFG errors from this PROC function */
+		status = -EPERM;
+	}
+	/* Create the device object, and pass a handle to the Bridge driver for
+	 * storage. */
+	if (!status) {
+		DBC_ASSERT(drv_fxns);
+		dev_obj = kzalloc(sizeof(struct dev_object), GFP_KERNEL);
+		if (dev_obj) {
+			/* Fill out the rest of the Dev Object structure: */
+			dev_obj->dev_node_obj = dev_node_obj;
+			dev_obj->module_obj = module_obj;
+			dev_obj->cod_mgr = NULL;
+			dev_obj->hchnl_mgr = NULL;
+			dev_obj->hdeh_mgr = NULL;
+			dev_obj->lock_owner = NULL;
+			dev_obj->word_size = DSPWORDSIZE;
+			dev_obj->hdrv_obj = hdrv_obj;
+			dev_obj->dev_type = DSP_UNIT;
+			/* Store this Bridge's interface functions, based on its
+			 * version. */
+			store_interface_fxns(drv_fxns,
+						&dev_obj->bridge_interface);
+
+			/* Call fxn_dev_create() to get the Bridge's device
+			 * context handle. */
+			status = (dev_obj->bridge_interface.pfn_dev_create)
+			    (&dev_obj->hbridge_context, dev_obj,
+			     host_res);
+			/* Assert bridge_dev_create()'s ensure clause: */
+			DBC_ASSERT(status
+				   || (dev_obj->hbridge_context != NULL));
+		} else {
+			status = -ENOMEM;
+		}
+	}
+	/* Attempt to create the COD manager for this device: */
+	if (!status)
+		status = init_cod_mgr(dev_obj);
+
+	/* Attempt to create the channel manager for this device: */
+	if (!status) {
+		mgr_attrs.max_channels = CHNL_MAXCHANNELS;
+		io_mgr_attrs.birq = host_res->birq_registers;
+		io_mgr_attrs.irq_shared =
+		    (host_res->birq_attrib & CFG_IRQSHARED);
+		io_mgr_attrs.word_size = DSPWORDSIZE;
+		mgr_attrs.word_size = DSPWORDSIZE;
+		num_windows = host_res->num_mem_windows;
+		if (num_windows) {
+			/* Assume last memory window is for CHNL */
+			io_mgr_attrs.shm_base = host_res->dw_mem_base[1] +
+			    host_res->dw_offset_for_monitor;
+			io_mgr_attrs.usm_length =
+			    host_res->dw_mem_length[1] -
+			    host_res->dw_offset_for_monitor;
+		} else {
+			io_mgr_attrs.shm_base = 0;
+			io_mgr_attrs.usm_length = 0;
+			pr_err("%s: No memory reserved for shared structures\n",
+			       __func__);
+		}
+		status = chnl_create(&dev_obj->hchnl_mgr, dev_obj, &mgr_attrs);
+		if (status == -ENOSYS) {
+			/* It's OK for a device not to have a channel
+			 * manager: */
+			status = 0;
+		}
+		/* Create CMM mgr even if Msg Mgr not impl. */
+		status = cmm_create(&dev_obj->hcmm_mgr,
+				    (struct dev_object *)dev_obj, NULL);
+		/* Only create IO manager if we have a channel manager */
+		if (!status && dev_obj->hchnl_mgr) {
+			status = io_create(&dev_obj->hio_mgr, dev_obj,
+					   &io_mgr_attrs);
+		}
+		/* Only create DEH manager if we have an IO manager */
+		if (!status) {
+			/* Instantiate the DEH module */
+			status = bridge_deh_create(&dev_obj->hdeh_mgr, dev_obj);
+		}
+		/* Create DMM mgr . */
+		status = dmm_create(&dev_obj->dmm_mgr,
+				    (struct dev_object *)dev_obj, NULL);
+	}
+	/* Add the new DEV_Object to the global list: */
+	if (!status) {
+		lst_init_elem(&dev_obj->link);
+		status = drv_insert_dev_object(hdrv_obj, dev_obj);
+	}
+	/* Create the Processor List */
+	if (!status) {
+		dev_obj->proc_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		if (!(dev_obj->proc_list))
+			status = -EPERM;
+		else
+			INIT_LIST_HEAD(&dev_obj->proc_list->head);
+	}
+leave:
+	/*  If all went well, return a handle to the dev object;
+	 *  else, cleanup and return NULL in the OUT parameter. */
+	if (!status) {
+		*device_obj = dev_obj;
+	} else {
+		if (dev_obj) {
+			kfree(dev_obj->proc_list);
+			if (dev_obj->cod_mgr)
+				cod_delete(dev_obj->cod_mgr);
+			if (dev_obj->dmm_mgr)
+				dmm_destroy(dev_obj->dmm_mgr);
+			kfree(dev_obj);
+		}
+
+		*device_obj = NULL;
+	}
+
+	DBC_ENSURE((!status && *device_obj) || (status && !*device_obj));
+	return status;
+}
+
+/*
+ *  ======== dev_create2 ========
+ *  Purpose:
+ *      After successful loading of the image from api_init_complete2
+ *      (PROC Auto_Start) or proc_load this fxn is called. This creates
+ *      the Node Manager and updates the DEV Object.
+ */
+int dev_create2(struct dev_object *hdev_obj)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdev_obj);
+
+	/* There can be only one Node Manager per DEV object */
+	DBC_ASSERT(!dev_obj->hnode_mgr);
+	status = node_create_mgr(&dev_obj->hnode_mgr, hdev_obj);
+	if (status)
+		dev_obj->hnode_mgr = NULL;
+
+	DBC_ENSURE((!status && dev_obj->hnode_mgr != NULL)
+		   || (status && dev_obj->hnode_mgr == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_destroy2 ========
+ *  Purpose:
+ *      Destroys the Node manager for this device.
+ */
+int dev_destroy2(struct dev_object *hdev_obj)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdev_obj);
+
+	if (dev_obj->hnode_mgr) {
+		if (node_delete_mgr(dev_obj->hnode_mgr))
+			status = -EPERM;
+		else
+			dev_obj->hnode_mgr = NULL;
+
+	}
+
+	DBC_ENSURE((!status && dev_obj->hnode_mgr == NULL) || status);
+	return status;
+}
+
+/*
+ *  ======== dev_destroy_device ========
+ *  Purpose:
+ *      Destroys the channel manager for this device, if any, calls
+ *      bridge_dev_destroy(), and then attempts to unload the Bridge module.
+ */
+int dev_destroy_device(struct dev_object *hdev_obj)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (hdev_obj) {
+		if (dev_obj->cod_mgr) {
+			cod_delete(dev_obj->cod_mgr);
+			dev_obj->cod_mgr = NULL;
+		}
+
+		if (dev_obj->hnode_mgr) {
+			node_delete_mgr(dev_obj->hnode_mgr);
+			dev_obj->hnode_mgr = NULL;
+		}
+
+		/* Free the io, channel, and message managers for this board: */
+		if (dev_obj->hio_mgr) {
+			io_destroy(dev_obj->hio_mgr);
+			dev_obj->hio_mgr = NULL;
+		}
+		if (dev_obj->hchnl_mgr) {
+			chnl_destroy(dev_obj->hchnl_mgr);
+			dev_obj->hchnl_mgr = NULL;
+		}
+		if (dev_obj->hmsg_mgr) {
+			msg_delete(dev_obj->hmsg_mgr);
+			dev_obj->hmsg_mgr = NULL;
+		}
+
+		if (dev_obj->hdeh_mgr) {
+			/* Uninitialize DEH module. */
+			bridge_deh_destroy(dev_obj->hdeh_mgr);
+			dev_obj->hdeh_mgr = NULL;
+		}
+		if (dev_obj->hcmm_mgr) {
+			cmm_destroy(dev_obj->hcmm_mgr, true);
+			dev_obj->hcmm_mgr = NULL;
+		}
+
+		if (dev_obj->dmm_mgr) {
+			dmm_destroy(dev_obj->dmm_mgr);
+			dev_obj->dmm_mgr = NULL;
+		}
+
+		/* Call the driver's bridge_dev_destroy() function: */
+		/* Require of DevDestroy */
+		if (dev_obj->hbridge_context) {
+			status = (*dev_obj->bridge_interface.pfn_dev_destroy)
+			    (dev_obj->hbridge_context);
+			dev_obj->hbridge_context = NULL;
+		} else
+			status = -EPERM;
+		if (!status) {
+			kfree(dev_obj->proc_list);
+			dev_obj->proc_list = NULL;
+
+			/* Remove this DEV_Object from the global list: */
+			drv_remove_dev_object(dev_obj->hdrv_obj, dev_obj);
+			/* Free The library * LDR_FreeModule
+			 * (dev_obj->module_obj); */
+			/* Free this dev object: */
+			kfree(dev_obj);
+			dev_obj = NULL;
+		}
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dev_get_chnl_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the channel manager handle created for this
+ *      device.
+ */
+int dev_get_chnl_mgr(struct dev_object *hdev_obj,
+			    struct chnl_mgr **mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	if (hdev_obj) {
+		*mgr = dev_obj->hchnl_mgr;
+	} else {
+		*mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_get_cmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the shared memory manager created for this
+ *      device.
+ */
+int dev_get_cmm_mgr(struct dev_object *hdev_obj,
+			   struct cmm_object **mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	if (hdev_obj) {
+		*mgr = dev_obj->hcmm_mgr;
+	} else {
+		*mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ */
+int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+			   struct dmm_object **mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	if (hdev_obj) {
+		*mgr = dev_obj->dmm_mgr;
+	} else {
+		*mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_get_cod_mgr ========
+ *  Purpose:
+ *      Retrieve the COD manager create for this device.
+ */
+int dev_get_cod_mgr(struct dev_object *hdev_obj,
+			   struct cod_manager **cod_mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(cod_mgr != NULL);
+
+	if (hdev_obj) {
+		*cod_mgr = dev_obj->cod_mgr;
+	} else {
+		*cod_mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (cod_mgr != NULL && *cod_mgr == NULL));
+	return status;
+}
+
+/*
+ *  ========= dev_get_deh_mgr ========
+ */
+int dev_get_deh_mgr(struct dev_object *hdev_obj,
+			   struct deh_mgr **deh_manager)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(deh_manager != NULL);
+	DBC_REQUIRE(hdev_obj);
+	if (hdev_obj) {
+		*deh_manager = hdev_obj->hdeh_mgr;
+	} else {
+		*deh_manager = NULL;
+		status = -EFAULT;
+	}
+	return status;
+}
+
+/*
+ *  ======== dev_get_dev_node ========
+ *  Purpose:
+ *      Retrieve the platform specific device ID for this device.
+ */
+int dev_get_dev_node(struct dev_object *hdev_obj,
+			    struct cfg_devnode **dev_nde)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dev_nde != NULL);
+
+	if (hdev_obj) {
+		*dev_nde = dev_obj->dev_node_obj;
+	} else {
+		*dev_nde = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (dev_nde != NULL && *dev_nde == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_get_first ========
+ *  Purpose:
+ *      Retrieve the first Device Object handle from an internal linked list
+ *      DEV_OBJECTs maintained by DEV.
+ */
+struct dev_object *dev_get_first(void)
+{
+	struct dev_object *dev_obj = NULL;
+
+	dev_obj = (struct dev_object *)drv_get_first_dev_object();
+
+	return dev_obj;
+}
+
+/*
+ *  ======== dev_get_intf_fxns ========
+ *  Purpose:
+ *      Retrieve the Bridge interface function structure for the loaded driver.
+ *      if_fxns != NULL.
+ */
+int dev_get_intf_fxns(struct dev_object *hdev_obj,
+			     struct bridge_drv_interface **if_fxns)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(if_fxns != NULL);
+
+	if (hdev_obj) {
+		*if_fxns = &dev_obj->bridge_interface;
+	} else {
+		*if_fxns = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || ((if_fxns != NULL) && (*if_fxns == NULL)));
+	return status;
+}
+
+/*
+ *  ========= dev_get_io_mgr ========
+ */
+int dev_get_io_mgr(struct dev_object *hdev_obj,
+			  struct io_mgr **io_man)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(io_man != NULL);
+	DBC_REQUIRE(hdev_obj);
+
+	if (hdev_obj) {
+		*io_man = hdev_obj->hio_mgr;
+	} else {
+		*io_man = NULL;
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dev_get_next ========
+ *  Purpose:
+ *      Retrieve the next Device Object handle from an internal linked list
+ *      of DEV_OBJECTs maintained by DEV, after having previously called
+ *      dev_get_first() and zero or more dev_get_next
+ */
+struct dev_object *dev_get_next(struct dev_object *hdev_obj)
+{
+	struct dev_object *next_dev_object = NULL;
+
+	if (hdev_obj) {
+		next_dev_object = (struct dev_object *)
+		    drv_get_next_dev_object((u32) hdev_obj);
+	}
+
+	return next_dev_object;
+}
+
+/*
+ *  ========= dev_get_msg_mgr ========
+ */
+void dev_get_msg_mgr(struct dev_object *hdev_obj, struct msg_mgr **msg_man)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(msg_man != NULL);
+	DBC_REQUIRE(hdev_obj);
+
+	*msg_man = hdev_obj->hmsg_mgr;
+}
+
+/*
+ *  ======== dev_get_node_manager ========
+ *  Purpose:
+ *      Retrieve the Node Manager Handle
+ */
+int dev_get_node_manager(struct dev_object *hdev_obj,
+				struct node_mgr **node_man)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(node_man != NULL);
+
+	if (hdev_obj) {
+		*node_man = dev_obj->hnode_mgr;
+	} else {
+		*node_man = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (node_man != NULL && *node_man == NULL));
+	return status;
+}
+
+/*
+ *  ======== dev_get_symbol ========
+ */
+int dev_get_symbol(struct dev_object *hdev_obj,
+			  const char *str_sym, u32 * pul_value)
+{
+	int status = 0;
+	struct cod_manager *cod_mgr;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(str_sym != NULL && pul_value != NULL);
+
+	if (hdev_obj) {
+		status = dev_get_cod_mgr(hdev_obj, &cod_mgr);
+		if (cod_mgr)
+			status = cod_get_sym_value(cod_mgr, (char *)str_sym,
+						   pul_value);
+		else
+			status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dev_get_bridge_context ========
+ *  Purpose:
+ *      Retrieve the Bridge Context handle, as returned by the
+ *      bridge_dev_create fxn.
+ */
+int dev_get_bridge_context(struct dev_object *hdev_obj,
+			       struct bridge_dev_context **phbridge_context)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(phbridge_context != NULL);
+
+	if (hdev_obj) {
+		*phbridge_context = dev_obj->hbridge_context;
+	} else {
+		*phbridge_context = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || ((phbridge_context != NULL) &&
+					     (*phbridge_context == NULL)));
+	return status;
+}
+
+/*
+ *  ======== dev_exit ========
+ *  Purpose:
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ */
+void dev_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	if (refs == 0) {
+		cmm_exit();
+		dmm_exit();
+	}
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== dev_init ========
+ *  Purpose:
+ *      Initialize DEV's private state, keeping a reference count on each call.
+ */
+bool dev_init(void)
+{
+	bool cmm_ret, dmm_ret, ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (refs == 0) {
+		cmm_ret = cmm_init();
+		dmm_ret = dmm_init();
+
+		ret = cmm_ret && dmm_ret;
+
+		if (!ret) {
+			if (cmm_ret)
+				cmm_exit();
+
+			if (dmm_ret)
+				dmm_exit();
+
+		}
+	}
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== dev_notify_clients ========
+ *  Purpose:
+ *      Notify all clients of this device of a change in device status.
+ */
+int dev_notify_clients(struct dev_object *hdev_obj, u32 ret)
+{
+	int status = 0;
+
+	struct dev_object *dev_obj = hdev_obj;
+	void *proc_obj;
+
+	for (proc_obj = (void *)lst_first(dev_obj->proc_list);
+	     proc_obj != NULL;
+	     proc_obj = (void *)lst_next(dev_obj->proc_list,
+					 (struct list_head *)proc_obj))
+		proc_notify_clients(proc_obj, (u32) ret);
+
+	return status;
+}
+
+/*
+ *  ======== dev_remove_device ========
+ */
+int dev_remove_device(struct cfg_devnode *dev_node_obj)
+{
+	struct dev_object *hdev_obj;	/* handle to device object */
+	int status = 0;
+	struct dev_object *dev_obj;
+
+	/* Retrieve the device object handle originaly stored with
+	 * the dev_node: */
+	status = cfg_get_dev_object(dev_node_obj, (u32 *) &hdev_obj);
+	if (!status) {
+		/* Remove the Processor List */
+		dev_obj = (struct dev_object *)hdev_obj;
+		/* Destroy the device object. */
+		status = dev_destroy_device(hdev_obj);
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dev_set_chnl_mgr ========
+ *  Purpose:
+ *      Set the channel manager for this device.
+ */
+int dev_set_chnl_mgr(struct dev_object *hdev_obj,
+			    struct chnl_mgr *hmgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (hdev_obj)
+		dev_obj->hchnl_mgr = hmgr;
+	else
+		status = -EFAULT;
+
+	DBC_ENSURE(status || (dev_obj->hchnl_mgr == hmgr));
+	return status;
+}
+
+/*
+ *  ======== dev_set_msg_mgr ========
+ *  Purpose:
+ *      Set the message manager for this device.
+ */
+void dev_set_msg_mgr(struct dev_object *hdev_obj, struct msg_mgr *hmgr)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdev_obj);
+
+	hdev_obj->hmsg_mgr = hmgr;
+}
+
+/*
+ *  ======== dev_start_device ========
+ *  Purpose:
+ *      Initializes the new device with the BRIDGE environment.
+ */
+int dev_start_device(struct cfg_devnode *dev_node_obj)
+{
+	struct dev_object *hdev_obj = NULL;	/* handle to 'Bridge Device */
+	/* Bridge driver filename */
+	char bridge_file_name[CFG_MAXSEARCHPATHLEN] = "UMA";
+	int status;
+	struct mgr_object *hmgr_obj = NULL;
+
+	DBC_REQUIRE(refs > 0);
+
+	/* Given all resources, create a device object. */
+	status = dev_create_device(&hdev_obj, bridge_file_name,
+				   dev_node_obj);
+	if (!status) {
+		/* Store away the hdev_obj with the DEVNODE */
+		status = cfg_set_dev_object(dev_node_obj, (u32) hdev_obj);
+		if (status) {
+			/* Clean up */
+			dev_destroy_device(hdev_obj);
+			hdev_obj = NULL;
+		}
+	}
+	if (!status) {
+		/* Create the Manager Object */
+		status = mgr_create(&hmgr_obj, dev_node_obj);
+	}
+	if (status) {
+		if (hdev_obj)
+			dev_destroy_device(hdev_obj);
+
+		/* Ensure the device extension is NULL */
+		cfg_set_dev_object(dev_node_obj, 0L);
+	}
+
+	return status;
+}
+
+/*
+ *  ======== fxn_not_implemented ========
+ *  Purpose:
+ *      Takes the place of a Bridge Null Function.
+ *  Parameters:
+ *      Multiple, optional.
+ *  Returns:
+ *      -ENOSYS:   Always.
+ */
+static int fxn_not_implemented(int arg, ...)
+{
+	return -ENOSYS;
+}
+
+/*
+ *  ======== init_cod_mgr ========
+ *  Purpose:
+ *      Create a COD manager for this device.
+ *  Parameters:
+ *      dev_obj:             Pointer to device object created with
+ *                              dev_create_device()
+ *  Returns:
+ *      0:                Success.
+ *      -EFAULT:            Invalid hdev_obj.
+ *  Requires:
+ *      Should only be called once by dev_create_device() for a given DevObject.
+ *  Ensures:
+ */
+static int init_cod_mgr(struct dev_object *dev_obj)
+{
+	int status = 0;
+	char *sz_dummy_file = "dummy";
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(!dev_obj || (dev_obj->cod_mgr == NULL));
+
+	status = cod_create(&dev_obj->cod_mgr, sz_dummy_file, NULL);
+
+	return status;
+}
+
+/*
+ *  ======== dev_insert_proc_object ========
+ *  Purpose:
+ *      Insert a ProcObject into the list maintained by DEV.
+ *  Parameters:
+ *      p_proc_object:        Ptr to ProcObject to insert.
+ *      dev_obj:         Ptr to Dev Object where the list is.
+  *     already_attached:  Ptr to return the bool
+ *  Returns:
+ *      0:           If successful.
+ *  Requires:
+ *      List Exists
+ *      hdev_obj is Valid handle
+ *      DEV Initialized
+ *      already_attached != NULL
+ *      proc_obj != 0
+ *  Ensures:
+ *      0 and List is not Empty.
+ */
+int dev_insert_proc_object(struct dev_object *hdev_obj,
+				  u32 proc_obj, bool *already_attached)
+{
+	int status = 0;
+	struct dev_object *dev_obj = (struct dev_object *)hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dev_obj);
+	DBC_REQUIRE(proc_obj != 0);
+	DBC_REQUIRE(dev_obj->proc_list != NULL);
+	DBC_REQUIRE(already_attached != NULL);
+	if (!LST_IS_EMPTY(dev_obj->proc_list))
+		*already_attached = true;
+
+	/* Add DevObject to tail. */
+	lst_put_tail(dev_obj->proc_list, (struct list_head *)proc_obj);
+
+	DBC_ENSURE(!status && !LST_IS_EMPTY(dev_obj->proc_list));
+
+	return status;
+}
+
+/*
+ *  ======== dev_remove_proc_object ========
+ *  Purpose:
+ *      Search for and remove a Proc object from the given list maintained
+ *      by the DEV
+ *  Parameters:
+ *      p_proc_object:        Ptr to ProcObject to insert.
+ *      dev_obj          Ptr to Dev Object where the list is.
+ *  Returns:
+ *      0:            If successful.
+ *  Requires:
+ *      List exists and is not empty
+ *      proc_obj != 0
+ *      hdev_obj is a valid Dev handle.
+ *  Ensures:
+ *  Details:
+ *      List will be deleted when the DEV is destroyed.
+ */
+int dev_remove_proc_object(struct dev_object *hdev_obj, u32 proc_obj)
+{
+	int status = -EPERM;
+	struct list_head *cur_elem;
+	struct dev_object *dev_obj = (struct dev_object *)hdev_obj;
+
+	DBC_REQUIRE(dev_obj);
+	DBC_REQUIRE(proc_obj != 0);
+	DBC_REQUIRE(dev_obj->proc_list != NULL);
+	DBC_REQUIRE(!LST_IS_EMPTY(dev_obj->proc_list));
+
+	/* Search list for dev_obj: */
+	for (cur_elem = lst_first(dev_obj->proc_list); cur_elem != NULL;
+	     cur_elem = lst_next(dev_obj->proc_list, cur_elem)) {
+		/* If found, remove it. */
+		if ((u32) cur_elem == proc_obj) {
+			lst_remove_elem(dev_obj->proc_list, cur_elem);
+			status = 0;
+			break;
+		}
+	}
+
+	return status;
+}
+
+int dev_get_dev_type(struct dev_object *device_obj, u8 *dev_type)
+{
+	int status = 0;
+	struct dev_object *dev_obj = (struct dev_object *)device_obj;
+
+	*dev_type = dev_obj->dev_type;
+
+	return status;
+}
+
+/*
+ *  ======== store_interface_fxns ========
+ *  Purpose:
+ *      Copy the Bridge's interface functions into the device object,
+ *      ensuring that fxn_not_implemented() is set for:
+ *
+ *      1. All Bridge function pointers which are NULL; and
+ *      2. All function slots in the struct dev_object structure which have no
+ *         corresponding slots in the the Bridge's interface, because the Bridge
+ *         is of an *older* version.
+ *  Parameters:
+ *      intf_fxns:      Interface fxn Structure of the Bridge's Dev Object.
+ *      drv_fxns:      Interface Fxns offered by the Bridge during DEV_Create().
+ *  Returns:
+ *  Requires:
+ *      Input pointers are valid.
+ *      Bridge driver is *not* written for a newer DSP API.
+ *  Ensures:
+ *      All function pointers in the dev object's fxn interface are not NULL.
+ */
+static void store_interface_fxns(struct bridge_drv_interface *drv_fxns,
+				 struct bridge_drv_interface *intf_fxns)
+{
+	u32 bridge_version;
+
+	/* Local helper macro: */
+#define  STORE_FXN(cast, pfn) \
+    (intf_fxns->pfn = ((drv_fxns->pfn != NULL) ? drv_fxns->pfn : \
+    (cast)fxn_not_implemented))
+
+	DBC_REQUIRE(intf_fxns != NULL);
+	DBC_REQUIRE(drv_fxns != NULL);
+	DBC_REQUIRE(MAKEVERSION(drv_fxns->brd_api_major_version,
+			drv_fxns->brd_api_minor_version) <= BRD_API_VERSION);
+	bridge_version = MAKEVERSION(drv_fxns->brd_api_major_version,
+				     drv_fxns->brd_api_minor_version);
+	intf_fxns->brd_api_major_version = drv_fxns->brd_api_major_version;
+	intf_fxns->brd_api_minor_version = drv_fxns->brd_api_minor_version;
+	/* Install functions up to DSP API version .80 (first alpha): */
+	if (bridge_version > 0) {
+		STORE_FXN(fxn_dev_create, pfn_dev_create);
+		STORE_FXN(fxn_dev_destroy, pfn_dev_destroy);
+		STORE_FXN(fxn_dev_ctrl, pfn_dev_cntrl);
+		STORE_FXN(fxn_brd_monitor, pfn_brd_monitor);
+		STORE_FXN(fxn_brd_start, pfn_brd_start);
+		STORE_FXN(fxn_brd_stop, pfn_brd_stop);
+		STORE_FXN(fxn_brd_status, pfn_brd_status);
+		STORE_FXN(fxn_brd_read, pfn_brd_read);
+		STORE_FXN(fxn_brd_write, pfn_brd_write);
+		STORE_FXN(fxn_brd_setstate, pfn_brd_set_state);
+		STORE_FXN(fxn_brd_memcopy, pfn_brd_mem_copy);
+		STORE_FXN(fxn_brd_memwrite, pfn_brd_mem_write);
+		STORE_FXN(fxn_brd_memmap, pfn_brd_mem_map);
+		STORE_FXN(fxn_brd_memunmap, pfn_brd_mem_un_map);
+		STORE_FXN(fxn_chnl_create, pfn_chnl_create);
+		STORE_FXN(fxn_chnl_destroy, pfn_chnl_destroy);
+		STORE_FXN(fxn_chnl_open, pfn_chnl_open);
+		STORE_FXN(fxn_chnl_close, pfn_chnl_close);
+		STORE_FXN(fxn_chnl_addioreq, pfn_chnl_add_io_req);
+		STORE_FXN(fxn_chnl_getioc, pfn_chnl_get_ioc);
+		STORE_FXN(fxn_chnl_cancelio, pfn_chnl_cancel_io);
+		STORE_FXN(fxn_chnl_flushio, pfn_chnl_flush_io);
+		STORE_FXN(fxn_chnl_getinfo, pfn_chnl_get_info);
+		STORE_FXN(fxn_chnl_getmgrinfo, pfn_chnl_get_mgr_info);
+		STORE_FXN(fxn_chnl_idle, pfn_chnl_idle);
+		STORE_FXN(fxn_chnl_registernotify, pfn_chnl_register_notify);
+		STORE_FXN(fxn_io_create, pfn_io_create);
+		STORE_FXN(fxn_io_destroy, pfn_io_destroy);
+		STORE_FXN(fxn_io_onloaded, pfn_io_on_loaded);
+		STORE_FXN(fxn_io_getprocload, pfn_io_get_proc_load);
+		STORE_FXN(fxn_msg_create, pfn_msg_create);
+		STORE_FXN(fxn_msg_createqueue, pfn_msg_create_queue);
+		STORE_FXN(fxn_msg_delete, pfn_msg_delete);
+		STORE_FXN(fxn_msg_deletequeue, pfn_msg_delete_queue);
+		STORE_FXN(fxn_msg_get, pfn_msg_get);
+		STORE_FXN(fxn_msg_put, pfn_msg_put);
+		STORE_FXN(fxn_msg_registernotify, pfn_msg_register_notify);
+		STORE_FXN(fxn_msg_setqueueid, pfn_msg_set_queue_id);
+	}
+	/* Add code for any additional functions in newerBridge versions here */
+	/* Ensure postcondition: */
+	DBC_ENSURE(intf_fxns->pfn_dev_create != NULL);
+	DBC_ENSURE(intf_fxns->pfn_dev_destroy != NULL);
+	DBC_ENSURE(intf_fxns->pfn_dev_cntrl != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_monitor != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_start != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_stop != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_status != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_read != NULL);
+	DBC_ENSURE(intf_fxns->pfn_brd_write != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_create != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_destroy != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_open != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_close != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_add_io_req != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_get_ioc != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_cancel_io != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_flush_io != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_get_info != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_get_mgr_info != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_idle != NULL);
+	DBC_ENSURE(intf_fxns->pfn_chnl_register_notify != NULL);
+	DBC_ENSURE(intf_fxns->pfn_io_create != NULL);
+	DBC_ENSURE(intf_fxns->pfn_io_destroy != NULL);
+	DBC_ENSURE(intf_fxns->pfn_io_on_loaded != NULL);
+	DBC_ENSURE(intf_fxns->pfn_io_get_proc_load != NULL);
+	DBC_ENSURE(intf_fxns->pfn_msg_set_queue_id != NULL);
+
+#undef  STORE_FXN
+}
diff --git a/drivers/staging/tidspbridge/pmgr/dmm.c b/drivers/staging/tidspbridge/pmgr/dmm.c
new file mode 100644
index 00000000000..8685233d762
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dmm.c
@@ -0,0 +1,533 @@
+/*
+ * dmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Manager (DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region
+ *
+ * Notes:
+ *   Region: Generic memory entitiy having a start address and a size
+ *   Chunk:  Reserved region
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/proc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dmm.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define DMM_ADDR_VIRTUAL(a) \
+	(((struct map_page *)(a) - virtual_mapping_table) * PG_SIZE4K +\
+	dyn_mem_map_beg)
+#define DMM_ADDR_TO_INDEX(a) (((a) - dyn_mem_map_beg) / PG_SIZE4K)
+
+/* DMM Mgr */
+struct dmm_object {
+	/* Dmm Lock is used to serialize access mem manager for
+	 * multi-threads. */
+	spinlock_t dmm_lock;	/* Lock to access dmm mgr */
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+struct map_page {
+	u32 region_size:15;
+	u32 mapped_size:15;
+	u32 reserved:1;
+	u32 mapped:1;
+};
+
+/*  Create the free list */
+static struct map_page *virtual_mapping_table;
+static u32 free_region;		/* The index of free region */
+static u32 free_size;
+static u32 dyn_mem_map_beg;	/* The Beginning of dynamic memory mapping */
+static u32 table_size;		/* The size of virt and phys pages tables */
+
+/*  ----------------------------------- Function Prototypes */
+static struct map_page *get_region(u32 addr);
+static struct map_page *get_free_region(u32 len);
+static struct map_page *get_mapped_region(u32 addrs);
+
+/*  ======== dmm_create_tables ========
+ *  Purpose:
+ *      Create table to hold the information of physical address
+ *      the buffer pages that is passed by the user, and the table
+ *      to hold the information of the virtual memory that is reserved
+ *      for DSP.
+ */
+int dmm_create_tables(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	status = dmm_delete_tables(dmm_obj);
+	if (!status) {
+		dyn_mem_map_beg = addr;
+		table_size = PG_ALIGN_HIGH(size, PG_SIZE4K) / PG_SIZE4K;
+		/*  Create the free list */
+		virtual_mapping_table = __vmalloc(table_size *
+				sizeof(struct map_page), GFP_KERNEL |
+				__GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+		if (virtual_mapping_table == NULL)
+			status = -ENOMEM;
+		else {
+			/* On successful allocation,
+			 * all entries are zero ('free') */
+			free_region = 0;
+			free_size = table_size * PG_SIZE4K;
+			virtual_mapping_table[0].region_size = table_size;
+		}
+	}
+
+	if (status)
+		pr_err("%s: failure, status 0x%x\n", __func__, status);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_create ========
+ *  Purpose:
+ *      Create a dynamic memory manager object.
+ */
+int dmm_create(struct dmm_object **dmm_manager,
+		      struct dev_object *hdev_obj,
+		      const struct dmm_mgrattrs *mgr_attrts)
+{
+	struct dmm_object *dmm_obj = NULL;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+
+	*dmm_manager = NULL;
+	/* create, zero, and tag a cmm mgr object */
+	dmm_obj = kzalloc(sizeof(struct dmm_object), GFP_KERNEL);
+	if (dmm_obj != NULL) {
+		spin_lock_init(&dmm_obj->dmm_lock);
+		*dmm_manager = dmm_obj;
+	} else {
+		status = -ENOMEM;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dmm_destroy ========
+ *  Purpose:
+ *      Release the communication memory manager resources.
+ */
+int dmm_destroy(struct dmm_object *dmm_mgr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	if (dmm_mgr) {
+		status = dmm_delete_tables(dmm_obj);
+		if (!status)
+			kfree(dmm_obj);
+	} else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== dmm_delete_tables ========
+ *  Purpose:
+ *      Delete DMM Tables.
+ */
+int dmm_delete_tables(struct dmm_object *dmm_mgr)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	/* Delete all DMM tables */
+	if (dmm_mgr)
+		vfree(virtual_mapping_table);
+	else
+		status = -EFAULT;
+	return status;
+}
+
+/*
+ *  ======== dmm_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ */
+void dmm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+}
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+int dmm_get_handle(void *hprocessor, struct dmm_object **dmm_manager)
+{
+	int status = 0;
+	struct dev_object *hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+	if (hprocessor != NULL)
+		status = proc_get_dev_object(hprocessor, &hdev_obj);
+	else
+		hdev_obj = dev_get_first();	/* default */
+
+	if (!status)
+		status = dev_get_dmm_mgr(hdev_obj, dmm_manager);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_init ========
+ *  Purpose:
+ *      Initializes private state of DMM module.
+ */
+bool dmm_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	virtual_mapping_table = NULL;
+	table_size = 0;
+
+	return ret;
+}
+
+/*
+ *  ======== dmm_map_memory ========
+ *  Purpose:
+ *      Add a mapping block to the reserved chunk. DMM assumes that this block
+ *  will be mapped in the DSP/IVA's address space. DMM returns an error if a
+ *  mapping overlaps another one. This function stores the info that will be
+ *  required later while unmapping the block.
+ */
+int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	/* Find the Reserved memory chunk containing the DSP block to
+	 * be mapped */
+	chunk = (struct map_page *)get_region(addr);
+	if (chunk != NULL) {
+		/* Mark the region 'mapped', leave the 'reserved' info as-is */
+		chunk->mapped = true;
+		chunk->mapped_size = (size / PG_SIZE4K);
+	} else
+		status = -ENOENT;
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, addr %x, size %x\n\tstatus %x, "
+		"chunk %p", __func__, dmm_mgr, addr, size, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_reserve_memory ========
+ *  Purpose:
+ *      Reserve a chunk of virtually contiguous DSP/IVA address space.
+ */
+int dmm_reserve_memory(struct dmm_object *dmm_mgr, u32 size,
+			      u32 *prsv_addr)
+{
+	int status = 0;
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *node;
+	u32 rsv_addr = 0;
+	u32 rsv_size = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Try to get a DSP chunk from the free list */
+	node = get_free_region(size);
+	if (node != NULL) {
+		/*  DSP chunk of given size is available. */
+		rsv_addr = DMM_ADDR_VIRTUAL(node);
+		/* Calculate the number entries to use */
+		rsv_size = size / PG_SIZE4K;
+		if (rsv_size < node->region_size) {
+			/* Mark remainder of free region */
+			node[rsv_size].mapped = false;
+			node[rsv_size].reserved = false;
+			node[rsv_size].region_size =
+			    node->region_size - rsv_size;
+			node[rsv_size].mapped_size = 0;
+		}
+		/*  get_region will return first fit chunk. But we only use what
+		   is requested. */
+		node->mapped = false;
+		node->reserved = true;
+		node->region_size = rsv_size;
+		node->mapped_size = 0;
+		/* Return the chunk's starting address */
+		*prsv_addr = rsv_addr;
+	} else
+		/*dSP chunk of given size is not available */
+		status = -ENOMEM;
+
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, size %x, prsv_addr %p\n\tstatus %x, "
+		"rsv_addr %x, rsv_size %x\n", __func__, dmm_mgr, size,
+		prsv_addr, status, rsv_addr, rsv_size);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_map_memory ========
+ *  Purpose:
+ *      Remove the mapped block from the reserved chunk.
+ */
+int dmm_un_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 *psize)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	chunk = get_mapped_region(addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Unmap the region */
+		*psize = chunk->mapped_size * PG_SIZE4K;
+		chunk->mapped = false;
+		chunk->mapped_size = 0;
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, addr %x, psize %p\n\tstatus %x, "
+		"chunk %p\n", __func__, dmm_mgr, addr, psize, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_reserve_memory ========
+ *  Purpose:
+ *      Free a chunk of reserved DSP/IVA address space.
+ */
+int dmm_un_reserve_memory(struct dmm_object *dmm_mgr, u32 rsv_addr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	u32 i;
+	int status = 0;
+	u32 chunk_size;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Find the chunk containing the reserved address */
+	chunk = get_mapped_region(rsv_addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Free all the mapped pages for this reserved region */
+		i = 0;
+		while (i < chunk->region_size) {
+			if (chunk[i].mapped) {
+				/* Remove mapping from the page tables. */
+				chunk_size = chunk[i].mapped_size;
+				/* Clear the mapping flags */
+				chunk[i].mapped = false;
+				chunk[i].mapped_size = 0;
+				i += chunk_size;
+			} else
+				i++;
+		}
+		/* Clear the flags (mark the region 'free') */
+		chunk->reserved = false;
+		/* NOTE: We do NOT coalesce free regions here.
+		 * Free regions are coalesced in get_region(), as it traverses
+		 *the whole mapping table
+		 */
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, rsv_addr %x\n\tstatus %x chunk %p",
+		__func__, dmm_mgr, rsv_addr, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== get_region ========
+ *  Purpose:
+ *      Returns a region containing the specified memory region
+ */
+static struct map_page *get_region(u32 addr)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+
+	if (virtual_mapping_table != NULL) {
+		/* find page mapped by this address */
+		i = DMM_ADDR_TO_INDEX(addr);
+		if (i < table_size)
+			curr_region = virtual_mapping_table + i;
+	}
+
+	dev_dbg(bridge, "%s: curr_region %p, free_region %d, free_size %d\n",
+		__func__, curr_region, free_region, free_size);
+	return curr_region;
+}
+
+/*
+ *  ======== get_free_region ========
+ *  Purpose:
+ *  Returns the requested free region
+ */
+static struct map_page *get_free_region(u32 len)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+	u32 region_size = 0;
+	u32 next_i = 0;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+	if (len > free_size) {
+		/* Find the largest free region
+		 * (coalesce during the traversal) */
+		while (i < table_size) {
+			region_size = virtual_mapping_table[i].region_size;
+			next_i = i + region_size;
+			if (virtual_mapping_table[i].reserved == false) {
+				/* Coalesce, if possible */
+				if (next_i < table_size &&
+				    virtual_mapping_table[next_i].reserved
+				    == false) {
+					virtual_mapping_table[i].region_size +=
+					    virtual_mapping_table
+					    [next_i].region_size;
+					continue;
+				}
+				region_size *= PG_SIZE4K;
+				if (region_size > free_size) {
+					free_region = i;
+					free_size = region_size;
+				}
+			}
+			i = next_i;
+		}
+	}
+	if (len <= free_size) {
+		curr_region = virtual_mapping_table + free_region;
+		free_region += (len / PG_SIZE4K);
+		free_size -= len;
+	}
+	return curr_region;
+}
+
+/*
+ *  ======== get_mapped_region ========
+ *  Purpose:
+ *  Returns the requestedmapped region
+ */
+static struct map_page *get_mapped_region(u32 addrs)
+{
+	u32 i = 0;
+	struct map_page *curr_region = NULL;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+
+	i = DMM_ADDR_TO_INDEX(addrs);
+	if (i < table_size && (virtual_mapping_table[i].mapped ||
+			       virtual_mapping_table[i].reserved))
+		curr_region = virtual_mapping_table + i;
+	return curr_region;
+}
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr)
+{
+	struct map_page *curr_node = NULL;
+	u32 i;
+	u32 freemem = 0;
+	u32 bigsize = 0;
+
+	spin_lock(&dmm_mgr->dmm_lock);
+
+	if (virtual_mapping_table != NULL) {
+		for (i = 0; i < table_size; i +=
+		     virtual_mapping_table[i].region_size) {
+			curr_node = virtual_mapping_table + i;
+			if (curr_node->reserved) {
+				/*printk("RESERVED size = 0x%x, "
+				   "Map size = 0x%x\n",
+				   (curr_node->region_size * PG_SIZE4K),
+				   (curr_node->mapped == false) ? 0 :
+				   (curr_node->mapped_size * PG_SIZE4K));
+				 */
+			} else {
+/*				printk("UNRESERVED size = 0x%x\n",
+					(curr_node->region_size * PG_SIZE4K));
+ */
+				freemem += (curr_node->region_size * PG_SIZE4K);
+				if (curr_node->region_size > bigsize)
+					bigsize = curr_node->region_size;
+			}
+		}
+	}
+	spin_unlock(&dmm_mgr->dmm_lock);
+	printk(KERN_INFO "Total DSP VA FREE memory = %d Mbytes\n",
+	       freemem / (1024 * 1024));
+	printk(KERN_INFO "Total DSP VA USED memory= %d Mbytes \n",
+	       (((table_size * PG_SIZE4K) - freemem)) / (1024 * 1024));
+	printk(KERN_INFO "DSP VA - Biggest FREE block = %d Mbytes \n\n",
+	       (bigsize * PG_SIZE4K / (1024 * 1024)));
+
+	return 0;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/pmgr/dspapi.c b/drivers/staging/tidspbridge/pmgr/dspapi.c
new file mode 100644
index 00000000000..7b42f72a97b
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dspapi.c
@@ -0,0 +1,1906 @@
+/*
+ * dspapi.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Common DSP API functions, also includes the wrapper
+ * functions called directly by the DeviceIOControl interface.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/ntfy.h>
+#include <dspbridge/services.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/chnl.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/drv.h>
+
+#include <dspbridge/proc.h>
+#include <dspbridge/strm.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/disp.h>
+#include <dspbridge/mgr.h>
+#include <dspbridge/node.h>
+#include <dspbridge/rmm.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/msg.h>
+#include <dspbridge/cmm.h>
+#include <dspbridge/io.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dspapi.h>
+#include <dspbridge/dbdcd.h>
+
+#include <dspbridge/resourcecleanup.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define MAX_TRACEBUFLEN 255
+#define MAX_LOADARGS    16
+#define MAX_NODES       64
+#define MAX_STREAMS     16
+#define MAX_BUFS	64
+
+/* Used to get dspbridge ioctl table */
+#define DB_GET_IOC_TABLE(cmd)	(DB_GET_MODULE(cmd) >> DB_MODULE_SHIFT)
+
+/* Device IOCtl function pointer */
+struct api_cmd {
+	u32(*fxn) (union trapped_args *args, void *pr_ctxt);
+	u32 dw_index;
+};
+
+/*  ----------------------------------- Globals */
+static u32 api_c_refs;
+
+/*
+ *  Function tables.
+ *  The order of these functions MUST be the same as the order of the command
+ *  numbers defined in dspapi-ioctl.h  This is how an IOCTL number in user mode
+ *  turns into a function call in kernel mode.
+ */
+
+/* MGR wrapper functions */
+static struct api_cmd mgr_cmd[] = {
+	{mgrwrap_enum_node_info},	/* MGR_ENUMNODE_INFO */
+	{mgrwrap_enum_proc_info},	/* MGR_ENUMPROC_INFO */
+	{mgrwrap_register_object},	/* MGR_REGISTEROBJECT */
+	{mgrwrap_unregister_object},	/* MGR_UNREGISTEROBJECT */
+	{mgrwrap_wait_for_bridge_events},	/* MGR_WAIT */
+	{mgrwrap_get_process_resources_info},	/* MGR_GET_PROC_RES */
+};
+
+/* PROC wrapper functions */
+static struct api_cmd proc_cmd[] = {
+	{procwrap_attach},	/* PROC_ATTACH */
+	{procwrap_ctrl},	/* PROC_CTRL */
+	{procwrap_detach},	/* PROC_DETACH */
+	{procwrap_enum_node_info},	/* PROC_ENUMNODE */
+	{procwrap_enum_resources},	/* PROC_ENUMRESOURCES */
+	{procwrap_get_state},	/* PROC_GET_STATE */
+	{procwrap_get_trace},	/* PROC_GET_TRACE */
+	{procwrap_load},	/* PROC_LOAD */
+	{procwrap_register_notify},	/* PROC_REGISTERNOTIFY */
+	{procwrap_start},	/* PROC_START */
+	{procwrap_reserve_memory},	/* PROC_RSVMEM */
+	{procwrap_un_reserve_memory},	/* PROC_UNRSVMEM */
+	{procwrap_map},		/* PROC_MAPMEM */
+	{procwrap_un_map},	/* PROC_UNMAPMEM */
+	{procwrap_flush_memory},	/* PROC_FLUSHMEMORY */
+	{procwrap_stop},	/* PROC_STOP */
+	{procwrap_invalidate_memory},	/* PROC_INVALIDATEMEMORY */
+	{procwrap_begin_dma},	/* PROC_BEGINDMA */
+	{procwrap_end_dma},	/* PROC_ENDDMA */
+};
+
+/* NODE wrapper functions */
+static struct api_cmd node_cmd[] = {
+	{nodewrap_allocate},	/* NODE_ALLOCATE */
+	{nodewrap_alloc_msg_buf},	/* NODE_ALLOCMSGBUF */
+	{nodewrap_change_priority},	/* NODE_CHANGEPRIORITY */
+	{nodewrap_connect},	/* NODE_CONNECT */
+	{nodewrap_create},	/* NODE_CREATE */
+	{nodewrap_delete},	/* NODE_DELETE */
+	{nodewrap_free_msg_buf},	/* NODE_FREEMSGBUF */
+	{nodewrap_get_attr},	/* NODE_GETATTR */
+	{nodewrap_get_message},	/* NODE_GETMESSAGE */
+	{nodewrap_pause},	/* NODE_PAUSE */
+	{nodewrap_put_message},	/* NODE_PUTMESSAGE */
+	{nodewrap_register_notify},	/* NODE_REGISTERNOTIFY */
+	{nodewrap_run},		/* NODE_RUN */
+	{nodewrap_terminate},	/* NODE_TERMINATE */
+	{nodewrap_get_uuid_props},	/* NODE_GETUUIDPROPS */
+};
+
+/* STRM wrapper functions */
+static struct api_cmd strm_cmd[] = {
+	{strmwrap_allocate_buffer},	/* STRM_ALLOCATEBUFFER */
+	{strmwrap_close},	/* STRM_CLOSE */
+	{strmwrap_free_buffer},	/* STRM_FREEBUFFER */
+	{strmwrap_get_event_handle},	/* STRM_GETEVENTHANDLE */
+	{strmwrap_get_info},	/* STRM_GETINFO */
+	{strmwrap_idle},	/* STRM_IDLE */
+	{strmwrap_issue},	/* STRM_ISSUE */
+	{strmwrap_open},	/* STRM_OPEN */
+	{strmwrap_reclaim},	/* STRM_RECLAIM */
+	{strmwrap_register_notify},	/* STRM_REGISTERNOTIFY */
+	{strmwrap_select},	/* STRM_SELECT */
+};
+
+/* CMM wrapper functions */
+static struct api_cmd cmm_cmd[] = {
+	{cmmwrap_calloc_buf},	/* CMM_ALLOCBUF */
+	{cmmwrap_free_buf},	/* CMM_FREEBUF */
+	{cmmwrap_get_handle},	/* CMM_GETHANDLE */
+	{cmmwrap_get_info},	/* CMM_GETINFO */
+};
+
+/* Array used to store ioctl table sizes. It can hold up to 8 entries */
+static u8 size_cmd[] = {
+	ARRAY_SIZE(mgr_cmd),
+	ARRAY_SIZE(proc_cmd),
+	ARRAY_SIZE(node_cmd),
+	ARRAY_SIZE(strm_cmd),
+	ARRAY_SIZE(cmm_cmd),
+};
+
+static inline void _cp_fm_usr(void *to, const void __user * from,
+			      int *err, unsigned long bytes)
+{
+	if (*err)
+		return;
+
+	if (unlikely(!from)) {
+		*err = -EFAULT;
+		return;
+	}
+
+	if (unlikely(copy_from_user(to, from, bytes)))
+		*err = -EFAULT;
+}
+
+#define CP_FM_USR(to, from, err, n)				\
+	_cp_fm_usr(to, from, &(err), (n) * sizeof(*(to)))
+
+static inline void _cp_to_usr(void __user *to, const void *from,
+			      int *err, unsigned long bytes)
+{
+	if (*err)
+		return;
+
+	if (unlikely(!to)) {
+		*err = -EFAULT;
+		return;
+	}
+
+	if (unlikely(copy_to_user(to, from, bytes)))
+		*err = -EFAULT;
+}
+
+#define CP_TO_USR(to, from, err, n)				\
+	_cp_to_usr(to, from, &(err), (n) * sizeof(*(from)))
+
+/*
+ *  ======== api_call_dev_ioctl ========
+ *  Purpose:
+ *      Call the (wrapper) function for the corresponding API IOCTL.
+ */
+inline int api_call_dev_ioctl(u32 cmd, union trapped_args *args,
+				      u32 *result, void *pr_ctxt)
+{
+	u32(*ioctl_cmd) (union trapped_args *args, void *pr_ctxt) = NULL;
+	int i;
+
+	if (_IOC_TYPE(cmd) != DB) {
+		pr_err("%s: Incompatible dspbridge ioctl number\n", __func__);
+		goto err;
+	}
+
+	if (DB_GET_IOC_TABLE(cmd) > ARRAY_SIZE(size_cmd)) {
+		pr_err("%s: undefined ioctl module\n", __func__);
+		goto err;
+	}
+
+	/* Check the size of the required cmd table */
+	i = DB_GET_IOC(cmd);
+	if (i > size_cmd[DB_GET_IOC_TABLE(cmd)]) {
+		pr_err("%s: requested ioctl %d out of bounds for table %d\n",
+		       __func__, i, DB_GET_IOC_TABLE(cmd));
+		goto err;
+	}
+
+	switch (DB_GET_MODULE(cmd)) {
+	case DB_MGR:
+		ioctl_cmd = mgr_cmd[i].fxn;
+		break;
+	case DB_PROC:
+		ioctl_cmd = proc_cmd[i].fxn;
+		break;
+	case DB_NODE:
+		ioctl_cmd = node_cmd[i].fxn;
+		break;
+	case DB_STRM:
+		ioctl_cmd = strm_cmd[i].fxn;
+		break;
+	case DB_CMM:
+		ioctl_cmd = cmm_cmd[i].fxn;
+		break;
+	}
+
+	if (!ioctl_cmd) {
+		pr_err("%s: requested ioctl not defined\n", __func__);
+		goto err;
+	} else {
+		*result = (*ioctl_cmd) (args, pr_ctxt);
+	}
+
+	return 0;
+
+err:
+	return -EINVAL;
+}
+
+/*
+ *  ======== api_exit ========
+ */
+void api_exit(void)
+{
+	DBC_REQUIRE(api_c_refs > 0);
+	api_c_refs--;
+
+	if (api_c_refs == 0) {
+		/* Release all modules initialized in api_init(). */
+		cod_exit();
+		dev_exit();
+		chnl_exit();
+		msg_exit();
+		io_exit();
+		strm_exit();
+		disp_exit();
+		node_exit();
+		proc_exit();
+		mgr_exit();
+		rmm_exit();
+		drv_exit();
+	}
+	DBC_ENSURE(api_c_refs >= 0);
+}
+
+/*
+ *  ======== api_init ========
+ *  Purpose:
+ *      Module initialization used by Bridge API.
+ */
+bool api_init(void)
+{
+	bool ret = true;
+	bool fdrv, fdev, fcod, fchnl, fmsg, fio;
+	bool fmgr, fproc, fnode, fdisp, fstrm, frmm;
+
+	if (api_c_refs == 0) {
+		/* initialize driver and other modules */
+		fdrv = drv_init();
+		fmgr = mgr_init();
+		fproc = proc_init();
+		fnode = node_init();
+		fdisp = disp_init();
+		fstrm = strm_init();
+		frmm = rmm_init();
+		fchnl = chnl_init();
+		fmsg = msg_mod_init();
+		fio = io_init();
+		fdev = dev_init();
+		fcod = cod_init();
+		ret = fdrv && fdev && fchnl && fcod && fmsg && fio;
+		ret = ret && fmgr && fproc && frmm;
+		if (!ret) {
+			if (fdrv)
+				drv_exit();
+
+			if (fmgr)
+				mgr_exit();
+
+			if (fstrm)
+				strm_exit();
+
+			if (fproc)
+				proc_exit();
+
+			if (fnode)
+				node_exit();
+
+			if (fdisp)
+				disp_exit();
+
+			if (fchnl)
+				chnl_exit();
+
+			if (fmsg)
+				msg_exit();
+
+			if (fio)
+				io_exit();
+
+			if (fdev)
+				dev_exit();
+
+			if (fcod)
+				cod_exit();
+
+			if (frmm)
+				rmm_exit();
+
+		}
+	}
+	if (ret)
+		api_c_refs++;
+
+	return ret;
+}
+
+/*
+ *  ======== api_init_complete2 ========
+ *  Purpose:
+ *      Perform any required bridge initialization which cannot
+ *      be performed in api_init() or dev_start_device() due
+ *      to the fact that some services are not yet
+ *      completely initialized.
+ *  Parameters:
+ *  Returns:
+ *      0:	Allow this device to load
+ *      -EPERM:      Failure.
+ *  Requires:
+ *      Bridge API initialized.
+ *  Ensures:
+ */
+int api_init_complete2(void)
+{
+	int status = 0;
+	struct cfg_devnode *dev_node;
+	struct dev_object *hdev_obj;
+	u8 dev_type;
+	u32 tmp;
+
+	DBC_REQUIRE(api_c_refs > 0);
+
+	/*  Walk the list of DevObjects, get each devnode, and attempting to
+	 *  autostart the board. Note that this requires COF loading, which
+	 *  requires KFILE. */
+	for (hdev_obj = dev_get_first(); hdev_obj != NULL;
+	     hdev_obj = dev_get_next(hdev_obj)) {
+		if (dev_get_dev_node(hdev_obj, &dev_node))
+			continue;
+
+		if (dev_get_dev_type(hdev_obj, &dev_type))
+			continue;
+
+		if ((dev_type == DSP_UNIT) || (dev_type == IVA_UNIT))
+			if (cfg_get_auto_start(dev_node, &tmp) == 0
+									&& tmp)
+				proc_auto_start(dev_node, hdev_obj);
+	}
+
+	return status;
+}
+
+/* TODO: Remove deprecated and not implemented ioctl wrappers */
+
+/*
+ * ======== mgrwrap_enum_node_info ========
+ */
+u32 mgrwrap_enum_node_info(union trapped_args *args, void *pr_ctxt)
+{
+	u8 *pndb_props;
+	u32 num_nodes;
+	int status = 0;
+	u32 size = args->args_mgr_enumnode_info.undb_props_size;
+
+	if (size < sizeof(struct dsp_ndbprops))
+		return -EINVAL;
+
+	pndb_props = kmalloc(size, GFP_KERNEL);
+	if (pndb_props == NULL)
+		status = -ENOMEM;
+
+	if (!status) {
+		status =
+		    mgr_enum_node_info(args->args_mgr_enumnode_info.node_id,
+				       (struct dsp_ndbprops *)pndb_props, size,
+				       &num_nodes);
+	}
+	CP_TO_USR(args->args_mgr_enumnode_info.pndb_props, pndb_props, status,
+		  size);
+	CP_TO_USR(args->args_mgr_enumnode_info.pu_num_nodes, &num_nodes, status,
+		  1);
+	kfree(pndb_props);
+
+	return status;
+}
+
+/*
+ * ======== mgrwrap_enum_proc_info ========
+ */
+u32 mgrwrap_enum_proc_info(union trapped_args *args, void *pr_ctxt)
+{
+	u8 *processor_info;
+	u8 num_procs;
+	int status = 0;
+	u32 size = args->args_mgr_enumproc_info.processor_info_size;
+
+	if (size < sizeof(struct dsp_processorinfo))
+		return -EINVAL;
+
+	processor_info = kmalloc(size, GFP_KERNEL);
+	if (processor_info == NULL)
+		status = -ENOMEM;
+
+	if (!status) {
+		status =
+		    mgr_enum_processor_info(args->args_mgr_enumproc_info.
+					    processor_id,
+					    (struct dsp_processorinfo *)
+					    processor_info, size, &num_procs);
+	}
+	CP_TO_USR(args->args_mgr_enumproc_info.processor_info, processor_info,
+		  status, size);
+	CP_TO_USR(args->args_mgr_enumproc_info.pu_num_procs, &num_procs,
+		  status, 1);
+	kfree(processor_info);
+
+	return status;
+}
+
+#define WRAP_MAP2CALLER(x) x
+/*
+ * ======== mgrwrap_register_object ========
+ */
+u32 mgrwrap_register_object(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct dsp_uuid uuid_obj;
+	u32 path_size = 0;
+	char *psz_path_name = NULL;
+	int status = 0;
+
+	CP_FM_USR(&uuid_obj, args->args_mgr_registerobject.uuid_obj, status, 1);
+	if (status)
+		goto func_end;
+	/* path_size is increased by 1 to accommodate NULL */
+	path_size = strlen_user((char *)
+				args->args_mgr_registerobject.psz_path_name) +
+	    1;
+	psz_path_name = kmalloc(path_size, GFP_KERNEL);
+	if (!psz_path_name)
+		goto func_end;
+	ret = strncpy_from_user(psz_path_name,
+				(char *)args->args_mgr_registerobject.
+				psz_path_name, path_size);
+	if (!ret) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	if (args->args_mgr_registerobject.obj_type >= DSP_DCDMAXOBJTYPE)
+		return -EINVAL;
+
+	status = dcd_register_object(&uuid_obj,
+				     args->args_mgr_registerobject.obj_type,
+				     (char *)psz_path_name);
+func_end:
+	kfree(psz_path_name);
+	return status;
+}
+
+/*
+ * ======== mgrwrap_unregister_object ========
+ */
+u32 mgrwrap_unregister_object(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_uuid uuid_obj;
+
+	CP_FM_USR(&uuid_obj, args->args_mgr_registerobject.uuid_obj, status, 1);
+	if (status)
+		goto func_end;
+
+	status = dcd_unregister_object(&uuid_obj,
+				       args->args_mgr_unregisterobject.
+				       obj_type);
+func_end:
+	return status;
+
+}
+
+/*
+ * ======== mgrwrap_wait_for_bridge_events ========
+ */
+u32 mgrwrap_wait_for_bridge_events(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_notification *anotifications[MAX_EVENTS];
+	struct dsp_notification notifications[MAX_EVENTS];
+	u32 index, i;
+	u32 count = args->args_mgr_wait.count;
+
+	if (count > MAX_EVENTS)
+		status = -EINVAL;
+
+	/* get the array of pointers to user structures */
+	CP_FM_USR(anotifications, args->args_mgr_wait.anotifications,
+		  status, count);
+	/* get the events */
+	for (i = 0; i < count; i++) {
+		CP_FM_USR(&notifications[i], anotifications[i], status, 1);
+		if (status || !notifications[i].handle) {
+			status = -EINVAL;
+			break;
+		}
+		/* set the array of pointers to kernel structures */
+		anotifications[i] = &notifications[i];
+	}
+	if (!status) {
+		status = mgr_wait_for_bridge_events(anotifications, count,
+							 &index,
+							 args->args_mgr_wait.
+							 utimeout);
+	}
+	CP_TO_USR(args->args_mgr_wait.pu_index, &index, status, 1);
+	return status;
+}
+
+/*
+ * ======== MGRWRAP_GetProcessResourceInfo ========
+ */
+u32 __deprecated mgrwrap_get_process_resources_info(union trapped_args * args,
+						    void *pr_ctxt)
+{
+	pr_err("%s: deprecated dspbridge ioctl\n", __func__);
+	return 0;
+}
+
+/*
+ * ======== procwrap_attach ========
+ */
+u32 procwrap_attach(union trapped_args *args, void *pr_ctxt)
+{
+	void *processor;
+	int status = 0;
+	struct dsp_processorattrin proc_attr_in, *attr_in = NULL;
+
+	/* Optional argument */
+	if (args->args_proc_attach.attr_in) {
+		CP_FM_USR(&proc_attr_in, args->args_proc_attach.attr_in, status,
+			  1);
+		if (!status)
+			attr_in = &proc_attr_in;
+		else
+			goto func_end;
+
+	}
+	status = proc_attach(args->args_proc_attach.processor_id, attr_in,
+			     &processor, pr_ctxt);
+	CP_TO_USR(args->args_proc_attach.ph_processor, &processor, status, 1);
+func_end:
+	return status;
+}
+
+/*
+ * ======== procwrap_ctrl ========
+ */
+u32 procwrap_ctrl(union trapped_args *args, void *pr_ctxt)
+{
+	u32 cb_data_size, __user * psize = (u32 __user *)
+	    args->args_proc_ctrl.pargs;
+	u8 *pargs = NULL;
+	int status = 0;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (psize) {
+		if (get_user(cb_data_size, psize)) {
+			status = -EPERM;
+			goto func_end;
+		}
+		cb_data_size += sizeof(u32);
+		pargs = kmalloc(cb_data_size, GFP_KERNEL);
+		if (pargs == NULL) {
+			status = -ENOMEM;
+			goto func_end;
+		}
+
+		CP_FM_USR(pargs, args->args_proc_ctrl.pargs, status,
+			  cb_data_size);
+	}
+	if (!status) {
+		status = proc_ctrl(hprocessor,
+				   args->args_proc_ctrl.dw_cmd,
+				   (struct dsp_cbdata *)pargs);
+	}
+
+	/* CP_TO_USR(args->args_proc_ctrl.pargs, pargs, status, 1); */
+	kfree(pargs);
+func_end:
+	return status;
+}
+
+/*
+ * ======== procwrap_detach ========
+ */
+u32 __deprecated procwrap_detach(union trapped_args * args, void *pr_ctxt)
+{
+	/* proc_detach called at bridge_release only */
+	pr_err("%s: deprecated dspbridge ioctl\n", __func__);
+	return 0;
+}
+
+/*
+ * ======== procwrap_enum_node_info ========
+ */
+u32 procwrap_enum_node_info(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	void *node_tab[MAX_NODES];
+	u32 num_nodes;
+	u32 alloc_cnt;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (!args->args_proc_enumnode_info.node_tab_size)
+		return -EINVAL;
+
+	status = proc_enum_nodes(hprocessor,
+				 node_tab,
+				 args->args_proc_enumnode_info.node_tab_size,
+				 &num_nodes, &alloc_cnt);
+	CP_TO_USR(args->args_proc_enumnode_info.node_tab, node_tab, status,
+		  num_nodes);
+	CP_TO_USR(args->args_proc_enumnode_info.pu_num_nodes, &num_nodes,
+		  status, 1);
+	CP_TO_USR(args->args_proc_enumnode_info.pu_allocated, &alloc_cnt,
+		  status, 1);
+	return status;
+}
+
+u32 procwrap_end_dma(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+
+	if (args->args_proc_dma.dir >= DMA_NONE)
+		return -EINVAL;
+
+	status = proc_end_dma(pr_ctxt,
+				   args->args_proc_dma.pmpu_addr,
+				   args->args_proc_dma.ul_size,
+				   args->args_proc_dma.dir);
+	return status;
+}
+
+u32 procwrap_begin_dma(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+
+	if (args->args_proc_dma.dir >= DMA_NONE)
+		return -EINVAL;
+
+	status = proc_begin_dma(pr_ctxt,
+				   args->args_proc_dma.pmpu_addr,
+				   args->args_proc_dma.ul_size,
+				   args->args_proc_dma.dir);
+	return status;
+}
+
+/*
+ * ======== procwrap_flush_memory ========
+ */
+u32 procwrap_flush_memory(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+
+	if (args->args_proc_flushmemory.ul_flags >
+	    PROC_WRITEBACK_INVALIDATE_MEM)
+		return -EINVAL;
+
+	status = proc_flush_memory(pr_ctxt,
+				   args->args_proc_flushmemory.pmpu_addr,
+				   args->args_proc_flushmemory.ul_size,
+				   args->args_proc_flushmemory.ul_flags);
+	return status;
+}
+
+/*
+ * ======== procwrap_invalidate_memory ========
+ */
+u32 procwrap_invalidate_memory(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+
+	status =
+	    proc_invalidate_memory(pr_ctxt,
+				   args->args_proc_invalidatememory.pmpu_addr,
+				   args->args_proc_invalidatememory.ul_size);
+	return status;
+}
+
+/*
+ * ======== procwrap_enum_resources ========
+ */
+u32 procwrap_enum_resources(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_resourceinfo resource_info;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (args->args_proc_enumresources.resource_info_size <
+	    sizeof(struct dsp_resourceinfo))
+		return -EINVAL;
+
+	status =
+	    proc_get_resource_info(hprocessor,
+				   args->args_proc_enumresources.resource_type,
+				   &resource_info,
+				   args->args_proc_enumresources.
+				   resource_info_size);
+
+	CP_TO_USR(args->args_proc_enumresources.resource_info, &resource_info,
+		  status, 1);
+
+	return status;
+
+}
+
+/*
+ * ======== procwrap_get_state ========
+ */
+u32 procwrap_get_state(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	struct dsp_processorstate proc_state;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (args->args_proc_getstate.state_info_size <
+	    sizeof(struct dsp_processorstate))
+		return -EINVAL;
+
+	status = proc_get_state(hprocessor, &proc_state,
+			   args->args_proc_getstate.state_info_size);
+	CP_TO_USR(args->args_proc_getstate.proc_state_obj, &proc_state, status,
+		  1);
+	return status;
+
+}
+
+/*
+ * ======== procwrap_get_trace ========
+ */
+u32 procwrap_get_trace(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	u8 *pbuf;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (args->args_proc_gettrace.max_size > MAX_TRACEBUFLEN)
+		return -EINVAL;
+
+	pbuf = kzalloc(args->args_proc_gettrace.max_size, GFP_KERNEL);
+	if (pbuf != NULL) {
+		status = proc_get_trace(hprocessor, pbuf,
+					args->args_proc_gettrace.max_size);
+	} else {
+		status = -ENOMEM;
+	}
+	CP_TO_USR(args->args_proc_gettrace.pbuf, pbuf, status,
+		  args->args_proc_gettrace.max_size);
+	kfree(pbuf);
+
+	return status;
+}
+
+/*
+ * ======== procwrap_load ========
+ */
+u32 procwrap_load(union trapped_args *args, void *pr_ctxt)
+{
+	s32 i, len;
+	int status = 0;
+	char *temp;
+	s32 count = args->args_proc_load.argc_index;
+	u8 **argv = NULL, **envp = NULL;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (count <= 0 || count > MAX_LOADARGS) {
+		status = -EINVAL;
+		goto func_cont;
+	}
+
+	argv = kmalloc(count * sizeof(u8 *), GFP_KERNEL);
+	if (!argv) {
+		status = -ENOMEM;
+		goto func_cont;
+	}
+
+	CP_FM_USR(argv, args->args_proc_load.user_args, status, count);
+	if (status) {
+		kfree(argv);
+		argv = NULL;
+		goto func_cont;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (argv[i]) {
+			/* User space pointer to argument */
+			temp = (char *)argv[i];
+			/* len is increased by 1 to accommodate NULL */
+			len = strlen_user((char *)temp) + 1;
+			/* Kernel space pointer to argument */
+			argv[i] = kmalloc(len, GFP_KERNEL);
+			if (argv[i]) {
+				CP_FM_USR(argv[i], temp, status, len);
+				if (status) {
+					kfree(argv[i]);
+					argv[i] = NULL;
+					goto func_cont;
+				}
+			} else {
+				status = -ENOMEM;
+				goto func_cont;
+			}
+		}
+	}
+	/* TODO: validate this */
+	if (args->args_proc_load.user_envp) {
+		/* number of elements in the envp array including NULL */
+		count = 0;
+		do {
+			get_user(temp, args->args_proc_load.user_envp + count);
+			count++;
+		} while (temp);
+		envp = kmalloc(count * sizeof(u8 *), GFP_KERNEL);
+		if (!envp) {
+			status = -ENOMEM;
+			goto func_cont;
+		}
+
+		CP_FM_USR(envp, args->args_proc_load.user_envp, status, count);
+		if (status) {
+			kfree(envp);
+			envp = NULL;
+			goto func_cont;
+		}
+		for (i = 0; envp[i]; i++) {
+			/* User space pointer to argument */
+			temp = (char *)envp[i];
+			/* len is increased by 1 to accommodate NULL */
+			len = strlen_user((char *)temp) + 1;
+			/* Kernel space pointer to argument */
+			envp[i] = kmalloc(len, GFP_KERNEL);
+			if (envp[i]) {
+				CP_FM_USR(envp[i], temp, status, len);
+				if (status) {
+					kfree(envp[i]);
+					envp[i] = NULL;
+					goto func_cont;
+				}
+			} else {
+				status = -ENOMEM;
+				goto func_cont;
+			}
+		}
+	}
+
+	if (!status) {
+		status = proc_load(hprocessor,
+				   args->args_proc_load.argc_index,
+				   (const char **)argv, (const char **)envp);
+	}
+func_cont:
+	if (envp) {
+		i = 0;
+		while (envp[i])
+			kfree(envp[i++]);
+
+		kfree(envp);
+	}
+
+	if (argv) {
+		count = args->args_proc_load.argc_index;
+		for (i = 0; (i < count) && argv[i]; i++)
+			kfree(argv[i]);
+
+		kfree(argv);
+	}
+
+	return status;
+}
+
+/*
+ * ======== procwrap_map ========
+ */
+u32 procwrap_map(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	void *map_addr;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if (!args->args_proc_mapmem.ul_size)
+		return -EINVAL;
+
+	status = proc_map(args->args_proc_mapmem.hprocessor,
+			  args->args_proc_mapmem.pmpu_addr,
+			  args->args_proc_mapmem.ul_size,
+			  args->args_proc_mapmem.req_addr, &map_addr,
+			  args->args_proc_mapmem.ul_map_attr, pr_ctxt);
+	if (!status) {
+		if (put_user(map_addr, args->args_proc_mapmem.pp_map_addr)) {
+			status = -EINVAL;
+			proc_un_map(hprocessor, map_addr, pr_ctxt);
+		}
+
+	}
+	return status;
+}
+
+/*
+ * ======== procwrap_register_notify ========
+ */
+u32 procwrap_register_notify(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	struct dsp_notification notification;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	/* Initialize the notification data structure */
+	notification.ps_name = NULL;
+	notification.handle = NULL;
+
+	status = proc_register_notify(hprocessor,
+				 args->args_proc_register_notify.event_mask,
+				 args->args_proc_register_notify.notify_type,
+				 &notification);
+	CP_TO_USR(args->args_proc_register_notify.hnotification, &notification,
+		  status, 1);
+	return status;
+}
+
+/*
+ * ======== procwrap_reserve_memory ========
+ */
+u32 procwrap_reserve_memory(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	void *prsv_addr;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if ((args->args_proc_rsvmem.ul_size <= 0) ||
+	    (args->args_proc_rsvmem.ul_size & (PG_SIZE4K - 1)) != 0)
+		return -EINVAL;
+
+	status = proc_reserve_memory(hprocessor,
+				     args->args_proc_rsvmem.ul_size, &prsv_addr,
+				     pr_ctxt);
+	if (!status) {
+		if (put_user(prsv_addr, args->args_proc_rsvmem.pp_rsv_addr)) {
+			status = -EINVAL;
+			proc_un_reserve_memory(args->args_proc_rsvmem.
+					       hprocessor, prsv_addr, pr_ctxt);
+		}
+	}
+	return status;
+}
+
+/*
+ * ======== procwrap_start ========
+ */
+u32 procwrap_start(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+
+	ret = proc_start(((struct process_context *)pr_ctxt)->hprocessor);
+	return ret;
+}
+
+/*
+ * ======== procwrap_un_map ========
+ */
+u32 procwrap_un_map(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+
+	status = proc_un_map(((struct process_context *)pr_ctxt)->hprocessor,
+			     args->args_proc_unmapmem.map_addr, pr_ctxt);
+	return status;
+}
+
+/*
+ * ======== procwrap_un_reserve_memory ========
+ */
+u32 procwrap_un_reserve_memory(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	status = proc_un_reserve_memory(hprocessor,
+					args->args_proc_unrsvmem.prsv_addr,
+					pr_ctxt);
+	return status;
+}
+
+/*
+ * ======== procwrap_stop ========
+ */
+u32 procwrap_stop(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+
+	ret = proc_stop(((struct process_context *)pr_ctxt)->hprocessor);
+
+	return ret;
+}
+
+/*
+ * ======== find_handle =========
+ */
+inline void find_node_handle(struct node_res_object **noderes,
+				void *pr_ctxt, void *hnode)
+{
+	rcu_read_lock();
+	*noderes = idr_find(((struct process_context *)pr_ctxt)->node_id,
+								(int)hnode - 1);
+	rcu_read_unlock();
+	return;
+}
+
+
+/*
+ * ======== nodewrap_allocate ========
+ */
+u32 nodewrap_allocate(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_uuid node_uuid;
+	u32 cb_data_size = 0;
+	u32 __user *psize = (u32 __user *) args->args_node_allocate.pargs;
+	u8 *pargs = NULL;
+	struct dsp_nodeattrin proc_attr_in, *attr_in = NULL;
+	struct node_res_object *node_res;
+	int nodeid;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	/* Optional argument */
+	if (psize) {
+		if (get_user(cb_data_size, psize))
+			status = -EPERM;
+
+		cb_data_size += sizeof(u32);
+		if (!status) {
+			pargs = kmalloc(cb_data_size, GFP_KERNEL);
+			if (pargs == NULL)
+				status = -ENOMEM;
+
+		}
+		CP_FM_USR(pargs, args->args_node_allocate.pargs, status,
+			  cb_data_size);
+	}
+	CP_FM_USR(&node_uuid, args->args_node_allocate.node_id_ptr, status, 1);
+	if (status)
+		goto func_cont;
+	/* Optional argument */
+	if (args->args_node_allocate.attr_in) {
+		CP_FM_USR(&proc_attr_in, args->args_node_allocate.attr_in,
+			  status, 1);
+		if (!status)
+			attr_in = &proc_attr_in;
+		else
+			status = -ENOMEM;
+
+	}
+	if (!status) {
+		status = node_allocate(hprocessor,
+				       &node_uuid, (struct dsp_cbdata *)pargs,
+				       attr_in, &node_res, pr_ctxt);
+	}
+	if (!status) {
+		nodeid = node_res->id + 1;
+		CP_TO_USR(args->args_node_allocate.ph_node, &nodeid,
+			status, 1);
+		if (status) {
+			status = -EFAULT;
+			node_delete(node_res, pr_ctxt);
+		}
+	}
+func_cont:
+	kfree(pargs);
+
+	return status;
+}
+
+/*
+ *  ======== nodewrap_alloc_msg_buf ========
+ */
+u32 nodewrap_alloc_msg_buf(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_bufferattr *pattr = NULL;
+	struct dsp_bufferattr attr;
+	u8 *pbuffer = NULL;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res,  pr_ctxt,
+				args->args_node_allocmsgbuf.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	if (!args->args_node_allocmsgbuf.usize)
+		return -EINVAL;
+
+	if (args->args_node_allocmsgbuf.pattr) {	/* Optional argument */
+		CP_FM_USR(&attr, args->args_node_allocmsgbuf.pattr, status, 1);
+		if (!status)
+			pattr = &attr;
+
+	}
+	/* argument */
+	CP_FM_USR(&pbuffer, args->args_node_allocmsgbuf.pbuffer, status, 1);
+	if (!status) {
+		status = node_alloc_msg_buf(node_res->hnode,
+					    args->args_node_allocmsgbuf.usize,
+					    pattr, &pbuffer);
+	}
+	CP_TO_USR(args->args_node_allocmsgbuf.pbuffer, &pbuffer, status, 1);
+	return status;
+}
+
+/*
+ * ======== nodewrap_change_priority ========
+ */
+u32 nodewrap_change_priority(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt,
+				args->args_node_changepriority.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	ret = node_change_priority(node_res->hnode,
+				   args->args_node_changepriority.prio);
+
+	return ret;
+}
+
+/*
+ * ======== nodewrap_connect ========
+ */
+u32 nodewrap_connect(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_strmattr attrs;
+	struct dsp_strmattr *pattrs = NULL;
+	u32 cb_data_size;
+	u32 __user *psize = (u32 __user *) args->args_node_connect.conn_param;
+	u8 *pargs = NULL;
+	struct node_res_object *node_res1, *node_res2;
+	struct node_object *node1 = NULL, *node2 = NULL;
+
+	if ((int)args->args_node_connect.hnode != DSP_HGPPNODE) {
+		find_node_handle(&node_res1, pr_ctxt,
+				args->args_node_connect.hnode);
+		if (node_res1)
+			node1 = node_res1->hnode;
+	} else {
+		node1 = args->args_node_connect.hnode;
+	}
+
+	if ((int)args->args_node_connect.other_node != DSP_HGPPNODE) {
+		find_node_handle(&node_res2, pr_ctxt,
+				args->args_node_connect.other_node);
+		if (node_res2)
+			node2 = node_res2->hnode;
+	} else {
+		node2 = args->args_node_connect.other_node;
+	}
+
+	if (!node1 || !node2)
+		return -EFAULT;
+
+	/* Optional argument */
+	if (psize) {
+		if (get_user(cb_data_size, psize))
+			status = -EPERM;
+
+		cb_data_size += sizeof(u32);
+		if (!status) {
+			pargs = kmalloc(cb_data_size, GFP_KERNEL);
+			if (pargs == NULL) {
+				status = -ENOMEM;
+				goto func_cont;
+			}
+
+		}
+		CP_FM_USR(pargs, args->args_node_connect.conn_param, status,
+			  cb_data_size);
+		if (status)
+			goto func_cont;
+	}
+	if (args->args_node_connect.pattrs) {	/* Optional argument */
+		CP_FM_USR(&attrs, args->args_node_connect.pattrs, status, 1);
+		if (!status)
+			pattrs = &attrs;
+
+	}
+	if (!status) {
+		status = node_connect(node1,
+				      args->args_node_connect.stream_id,
+				      node2,
+				      args->args_node_connect.other_stream,
+				      pattrs, (struct dsp_cbdata *)pargs);
+	}
+func_cont:
+	kfree(pargs);
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_create ========
+ */
+u32 nodewrap_create(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_create.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	ret = node_create(node_res->hnode);
+
+	return ret;
+}
+
+/*
+ * ======== nodewrap_delete ========
+ */
+u32 nodewrap_delete(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_delete.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	ret = node_delete(node_res, pr_ctxt);
+
+	return ret;
+}
+
+/*
+ *  ======== nodewrap_free_msg_buf ========
+ */
+u32 nodewrap_free_msg_buf(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_bufferattr *pattr = NULL;
+	struct dsp_bufferattr attr;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_freemsgbuf.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	if (args->args_node_freemsgbuf.pattr) {	/* Optional argument */
+		CP_FM_USR(&attr, args->args_node_freemsgbuf.pattr, status, 1);
+		if (!status)
+			pattr = &attr;
+
+	}
+
+	if (!args->args_node_freemsgbuf.pbuffer)
+		return -EFAULT;
+
+	if (!status) {
+		status = node_free_msg_buf(node_res->hnode,
+					   args->args_node_freemsgbuf.pbuffer,
+					   pattr);
+	}
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_get_attr ========
+ */
+u32 nodewrap_get_attr(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_nodeattr attr;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_getattr.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	status = node_get_attr(node_res->hnode, &attr,
+			       args->args_node_getattr.attr_size);
+	CP_TO_USR(args->args_node_getattr.pattr, &attr, status, 1);
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_get_message ========
+ */
+u32 nodewrap_get_message(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	struct dsp_msg msg;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_getmessage.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	status = node_get_message(node_res->hnode, &msg,
+				  args->args_node_getmessage.utimeout);
+
+	CP_TO_USR(args->args_node_getmessage.message, &msg, status, 1);
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_pause ========
+ */
+u32 nodewrap_pause(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_pause.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	ret = node_pause(node_res->hnode);
+
+	return ret;
+}
+
+/*
+ * ======== nodewrap_put_message ========
+ */
+u32 nodewrap_put_message(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_msg msg;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_putmessage.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	CP_FM_USR(&msg, args->args_node_putmessage.message, status, 1);
+
+	if (!status) {
+		status =
+		    node_put_message(node_res->hnode, &msg,
+				     args->args_node_putmessage.utimeout);
+	}
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_register_notify ========
+ */
+u32 nodewrap_register_notify(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_notification notification;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt,
+			args->args_node_registernotify.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	/* Initialize the notification data structure */
+	notification.ps_name = NULL;
+	notification.handle = NULL;
+
+	if (!args->args_proc_register_notify.event_mask)
+		CP_FM_USR(&notification,
+			  args->args_proc_register_notify.hnotification,
+			  status, 1);
+
+	status = node_register_notify(node_res->hnode,
+				      args->args_node_registernotify.event_mask,
+				      args->args_node_registernotify.
+				      notify_type, &notification);
+	CP_TO_USR(args->args_node_registernotify.hnotification, &notification,
+		  status, 1);
+	return status;
+}
+
+/*
+ * ======== nodewrap_run ========
+ */
+u32 nodewrap_run(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_run.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	ret = node_run(node_res->hnode);
+
+	return ret;
+}
+
+/*
+ * ======== nodewrap_terminate ========
+ */
+u32 nodewrap_terminate(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	int tempstatus;
+	struct node_res_object *node_res;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_node_terminate.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	status = node_terminate(node_res->hnode, &tempstatus);
+
+	CP_TO_USR(args->args_node_terminate.pstatus, &tempstatus, status, 1);
+
+	return status;
+}
+
+/*
+ * ======== nodewrap_get_uuid_props ========
+ */
+u32 nodewrap_get_uuid_props(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_uuid node_uuid;
+	struct dsp_ndbprops *pnode_props = NULL;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	CP_FM_USR(&node_uuid, args->args_node_getuuidprops.node_id_ptr, status,
+		  1);
+	if (status)
+		goto func_cont;
+	pnode_props = kmalloc(sizeof(struct dsp_ndbprops), GFP_KERNEL);
+	if (pnode_props != NULL) {
+		status =
+		    node_get_uuid_props(hprocessor, &node_uuid, pnode_props);
+		CP_TO_USR(args->args_node_getuuidprops.node_props, pnode_props,
+			  status, 1);
+	} else
+		status = -ENOMEM;
+func_cont:
+	kfree(pnode_props);
+	return status;
+}
+
+/*
+ * ======== find_strm_handle =========
+ */
+inline void find_strm_handle(struct strm_res_object **strmres,
+				void *pr_ctxt, void *hstream)
+{
+	rcu_read_lock();
+	*strmres = idr_find(((struct process_context *)pr_ctxt)->stream_id,
+							(int)hstream - 1);
+	rcu_read_unlock();
+	return;
+}
+
+/*
+ * ======== strmwrap_allocate_buffer ========
+ */
+u32 strmwrap_allocate_buffer(union trapped_args *args, void *pr_ctxt)
+{
+	int status;
+	u8 **ap_buffer = NULL;
+	u32 num_bufs = args->args_strm_allocatebuffer.num_bufs;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt,
+		args->args_strm_allocatebuffer.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	if (num_bufs > MAX_BUFS)
+		return -EINVAL;
+
+	ap_buffer = kmalloc((num_bufs * sizeof(u8 *)), GFP_KERNEL);
+	if (ap_buffer == NULL)
+		return -ENOMEM;
+
+	status = strm_allocate_buffer(strm_res,
+				      args->args_strm_allocatebuffer.usize,
+				      ap_buffer, num_bufs, pr_ctxt);
+	if (!status) {
+		CP_TO_USR(args->args_strm_allocatebuffer.ap_buffer, ap_buffer,
+			  status, num_bufs);
+		if (status) {
+			status = -EFAULT;
+			strm_free_buffer(strm_res,
+					 ap_buffer, num_bufs, pr_ctxt);
+		}
+	}
+	kfree(ap_buffer);
+
+	return status;
+}
+
+/*
+ * ======== strmwrap_close ========
+ */
+u32 strmwrap_close(union trapped_args *args, void *pr_ctxt)
+{
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt, args->args_strm_close.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	return strm_close(strm_res, pr_ctxt);
+}
+
+/*
+ * ======== strmwrap_free_buffer ========
+ */
+u32 strmwrap_free_buffer(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	u8 **ap_buffer = NULL;
+	u32 num_bufs = args->args_strm_freebuffer.num_bufs;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt,
+			args->args_strm_freebuffer.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	if (num_bufs > MAX_BUFS)
+		return -EINVAL;
+
+	ap_buffer = kmalloc((num_bufs * sizeof(u8 *)), GFP_KERNEL);
+	if (ap_buffer == NULL)
+		return -ENOMEM;
+
+	CP_FM_USR(ap_buffer, args->args_strm_freebuffer.ap_buffer, status,
+		  num_bufs);
+
+	if (!status)
+		status = strm_free_buffer(strm_res,
+					  ap_buffer, num_bufs, pr_ctxt);
+
+	CP_TO_USR(args->args_strm_freebuffer.ap_buffer, ap_buffer, status,
+		  num_bufs);
+	kfree(ap_buffer);
+
+	return status;
+}
+
+/*
+ * ======== strmwrap_get_event_handle ========
+ */
+u32 __deprecated strmwrap_get_event_handle(union trapped_args * args,
+					   void *pr_ctxt)
+{
+	pr_err("%s: deprecated dspbridge ioctl\n", __func__);
+	return -ENOSYS;
+}
+
+/*
+ * ======== strmwrap_get_info ========
+ */
+u32 strmwrap_get_info(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct stream_info strm_info;
+	struct dsp_streaminfo user;
+	struct dsp_streaminfo *temp;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt,
+			args->args_strm_getinfo.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	CP_FM_USR(&strm_info, args->args_strm_getinfo.stream_info, status, 1);
+	temp = strm_info.user_strm;
+
+	strm_info.user_strm = &user;
+
+	if (!status) {
+		status = strm_get_info(strm_res->hstream,
+				       &strm_info,
+				       args->args_strm_getinfo.
+				       stream_info_size);
+	}
+	CP_TO_USR(temp, strm_info.user_strm, status, 1);
+	strm_info.user_strm = temp;
+	CP_TO_USR(args->args_strm_getinfo.stream_info, &strm_info, status, 1);
+	return status;
+}
+
+/*
+ * ======== strmwrap_idle ========
+ */
+u32 strmwrap_idle(union trapped_args *args, void *pr_ctxt)
+{
+	u32 ret;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt, args->args_strm_idle.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	ret = strm_idle(strm_res->hstream, args->args_strm_idle.flush_flag);
+
+	return ret;
+}
+
+/*
+ * ======== strmwrap_issue ========
+ */
+u32 strmwrap_issue(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt, args->args_strm_issue.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	if (!args->args_strm_issue.pbuffer)
+		return -EFAULT;
+
+	/* No need of doing CP_FM_USR for the user buffer (pbuffer)
+	   as this is done in Bridge internal function bridge_chnl_add_io_req
+	   in chnl_sm.c */
+	status = strm_issue(strm_res->hstream,
+			    args->args_strm_issue.pbuffer,
+			    args->args_strm_issue.dw_bytes,
+			    args->args_strm_issue.dw_buf_size,
+			    args->args_strm_issue.dw_arg);
+
+	return status;
+}
+
+/*
+ * ======== strmwrap_open ========
+ */
+u32 strmwrap_open(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct strm_attr attr;
+	struct strm_res_object *strm_res_obj;
+	struct dsp_streamattrin strm_attr_in;
+	struct node_res_object *node_res;
+	int strmid;
+
+	find_node_handle(&node_res, pr_ctxt, args->args_strm_open.hnode);
+
+	if (!node_res)
+		return -EFAULT;
+
+	CP_FM_USR(&attr, args->args_strm_open.attr_in, status, 1);
+
+	if (attr.stream_attr_in != NULL) {	/* Optional argument */
+		CP_FM_USR(&strm_attr_in, attr.stream_attr_in, status, 1);
+		if (!status) {
+			attr.stream_attr_in = &strm_attr_in;
+			if (attr.stream_attr_in->strm_mode == STRMMODE_LDMA)
+				return -ENOSYS;
+		}
+
+	}
+	status = strm_open(node_res->hnode,
+			   args->args_strm_open.direction,
+			   args->args_strm_open.index, &attr, &strm_res_obj,
+			   pr_ctxt);
+	if (!status) {
+		strmid = strm_res_obj->id + 1;
+		CP_TO_USR(args->args_strm_open.ph_stream, &strmid, status, 1);
+	}
+	return status;
+}
+
+/*
+ * ======== strmwrap_reclaim ========
+ */
+u32 strmwrap_reclaim(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	u8 *buf_ptr;
+	u32 ul_bytes;
+	u32 dw_arg;
+	u32 ul_buf_size;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt, args->args_strm_reclaim.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	status = strm_reclaim(strm_res->hstream, &buf_ptr,
+			      &ul_bytes, &ul_buf_size, &dw_arg);
+	CP_TO_USR(args->args_strm_reclaim.buf_ptr, &buf_ptr, status, 1);
+	CP_TO_USR(args->args_strm_reclaim.bytes, &ul_bytes, status, 1);
+	CP_TO_USR(args->args_strm_reclaim.pdw_arg, &dw_arg, status, 1);
+
+	if (args->args_strm_reclaim.buf_size_ptr != NULL) {
+		CP_TO_USR(args->args_strm_reclaim.buf_size_ptr, &ul_buf_size,
+			  status, 1);
+	}
+
+	return status;
+}
+
+/*
+ * ======== strmwrap_register_notify ========
+ */
+u32 strmwrap_register_notify(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct dsp_notification notification;
+	struct strm_res_object *strm_res;
+
+	find_strm_handle(&strm_res, pr_ctxt,
+			args->args_strm_registernotify.hstream);
+
+	if (!strm_res)
+		return -EFAULT;
+
+	/* Initialize the notification data structure */
+	notification.ps_name = NULL;
+	notification.handle = NULL;
+
+	status = strm_register_notify(strm_res->hstream,
+				      args->args_strm_registernotify.event_mask,
+				      args->args_strm_registernotify.
+				      notify_type, &notification);
+	CP_TO_USR(args->args_strm_registernotify.hnotification, &notification,
+		  status, 1);
+
+	return status;
+}
+
+/*
+ * ======== strmwrap_select ========
+ */
+u32 strmwrap_select(union trapped_args *args, void *pr_ctxt)
+{
+	u32 mask;
+	struct strm_object *strm_tab[MAX_STREAMS];
+	int status = 0;
+	struct strm_res_object *strm_res;
+	int *ids[MAX_STREAMS];
+	int i;
+
+	if (args->args_strm_select.strm_num > MAX_STREAMS)
+		return -EINVAL;
+
+	CP_FM_USR(ids, args->args_strm_select.stream_tab, status,
+		args->args_strm_select.strm_num);
+
+	if (status)
+		return status;
+
+	for (i = 0; i < args->args_strm_select.strm_num; i++) {
+		find_strm_handle(&strm_res, pr_ctxt, ids[i]);
+
+		if (!strm_res)
+			return -EFAULT;
+
+		strm_tab[i] = strm_res->hstream;
+	}
+
+	if (!status) {
+		status = strm_select(strm_tab, args->args_strm_select.strm_num,
+				     &mask, args->args_strm_select.utimeout);
+	}
+	CP_TO_USR(args->args_strm_select.pmask, &mask, status, 1);
+	return status;
+}
+
+/* CMM */
+
+/*
+ * ======== cmmwrap_calloc_buf ========
+ */
+u32 __deprecated cmmwrap_calloc_buf(union trapped_args * args, void *pr_ctxt)
+{
+	/* This operation is done in kernel */
+	pr_err("%s: deprecated dspbridge ioctl\n", __func__);
+	return -ENOSYS;
+}
+
+/*
+ * ======== cmmwrap_free_buf ========
+ */
+u32 __deprecated cmmwrap_free_buf(union trapped_args * args, void *pr_ctxt)
+{
+	/* This operation is done in kernel */
+	pr_err("%s: deprecated dspbridge ioctl\n", __func__);
+	return -ENOSYS;
+}
+
+/*
+ * ======== cmmwrap_get_handle ========
+ */
+u32 cmmwrap_get_handle(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct cmm_object *hcmm_mgr;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	status = cmm_get_handle(hprocessor, &hcmm_mgr);
+
+	CP_TO_USR(args->args_cmm_gethandle.ph_cmm_mgr, &hcmm_mgr, status, 1);
+
+	return status;
+}
+
+/*
+ * ======== cmmwrap_get_info ========
+ */
+u32 cmmwrap_get_info(union trapped_args *args, void *pr_ctxt)
+{
+	int status = 0;
+	struct cmm_info cmm_info_obj;
+
+	status = cmm_get_info(args->args_cmm_getinfo.hcmm_mgr, &cmm_info_obj);
+
+	CP_TO_USR(args->args_cmm_getinfo.cmm_info_obj, &cmm_info_obj, status,
+		  1);
+
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/io.c b/drivers/staging/tidspbridge/pmgr/io.c
new file mode 100644
index 00000000000..7970fe55648
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/io.c
@@ -0,0 +1,142 @@
+/*
+ * io.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * IO manager interface: Manages IO between CHNL and msg_ctrl.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- This */
+#include <ioobj.h>
+#include <dspbridge/iodefs.h>
+#include <dspbridge/io.h>
+
+/*  ----------------------------------- Globals */
+static u32 refs;
+
+/*
+ *  ======== io_create ========
+ *  Purpose:
+ *      Create an IO manager object, responsible for managing IO between
+ *      CHNL and msg_ctrl
+ */
+int io_create(struct io_mgr **io_man, struct dev_object *hdev_obj,
+		     const struct io_attrs *mgr_attrts)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct io_mgr *hio_mgr = NULL;
+	struct io_mgr_ *pio_mgr = NULL;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(io_man != NULL);
+	DBC_REQUIRE(mgr_attrts != NULL);
+
+	*io_man = NULL;
+
+	/* A memory base of 0 implies no memory base: */
+	if ((mgr_attrts->shm_base != 0) && (mgr_attrts->usm_length == 0))
+		status = -EINVAL;
+
+	if (mgr_attrts->word_size == 0)
+		status = -EINVAL;
+
+	if (!status) {
+		dev_get_intf_fxns(hdev_obj, &intf_fxns);
+
+		/* Let Bridge channel module finish the create: */
+		status = (*intf_fxns->pfn_io_create) (&hio_mgr, hdev_obj,
+						      mgr_attrts);
+
+		if (!status) {
+			pio_mgr = (struct io_mgr_ *)hio_mgr;
+			pio_mgr->intf_fxns = intf_fxns;
+			pio_mgr->hdev_obj = hdev_obj;
+
+			/* Return the new channel manager handle: */
+			*io_man = hio_mgr;
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== io_destroy ========
+ *  Purpose:
+ *      Delete IO manager.
+ */
+int io_destroy(struct io_mgr *hio_mgr)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct io_mgr_ *pio_mgr = (struct io_mgr_ *)hio_mgr;
+	int status;
+
+	DBC_REQUIRE(refs > 0);
+
+	intf_fxns = pio_mgr->intf_fxns;
+
+	/* Let Bridge channel module destroy the io_mgr: */
+	status = (*intf_fxns->pfn_io_destroy) (hio_mgr);
+
+	return status;
+}
+
+/*
+ *  ======== io_exit ========
+ *  Purpose:
+ *      Discontinue usage of the IO module.
+ */
+void io_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== io_init ========
+ *  Purpose:
+ *      Initialize the IO module's private state.
+ */
+bool io_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/ioobj.h b/drivers/staging/tidspbridge/pmgr/ioobj.h
new file mode 100644
index 00000000000..f46355fa7b2
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/ioobj.h
@@ -0,0 +1,38 @@
+/*
+ * ioobj.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Structure subcomponents of channel class library IO objects which
+ * are exposed to DSP API from Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef IOOBJ_
+#define IOOBJ_
+
+#include <dspbridge/devdefs.h>
+#include <dspbridge/dspdefs.h>
+
+/*
+ *  This struct is the first field in a io_mgr struct. Other, implementation
+ *  specific fields follow this structure in memory.
+ */
+struct io_mgr_ {
+	/* These must be the first fields in a io_mgr struct: */
+	struct bridge_dev_context *hbridge_context;	/* Bridge context. */
+	/* Function interface to Bridge driver. */
+	struct bridge_drv_interface *intf_fxns;
+	struct dev_object *hdev_obj;	/* Device this board represents. */
+};
+
+#endif /* IOOBJ_ */
diff --git a/drivers/staging/tidspbridge/pmgr/msg.c b/drivers/staging/tidspbridge/pmgr/msg.c
new file mode 100644
index 00000000000..abd43659062
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/msg.c
@@ -0,0 +1,129 @@
+/*
+ * msg.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge msg_ctrl Module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- Bridge Driver */
+#include <dspbridge/dspdefs.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- This */
+#include <msgobj.h>
+#include <dspbridge/msg.h>
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+
+/*
+ *  ======== msg_create ========
+ *  Purpose:
+ *      Create an object to manage message queues. Only one of these objects
+ *      can exist per device object.
+ */
+int msg_create(struct msg_mgr **msg_man,
+		      struct dev_object *hdev_obj, msg_onexit msg_callback)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct msg_mgr_ *msg_mgr_obj;
+	struct msg_mgr *hmsg_mgr;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(msg_man != NULL);
+	DBC_REQUIRE(msg_callback != NULL);
+	DBC_REQUIRE(hdev_obj != NULL);
+
+	*msg_man = NULL;
+
+	dev_get_intf_fxns(hdev_obj, &intf_fxns);
+
+	/* Let Bridge message module finish the create: */
+	status =
+	    (*intf_fxns->pfn_msg_create) (&hmsg_mgr, hdev_obj, msg_callback);
+
+	if (!status) {
+		/* Fill in DSP API message module's fields of the msg_mgr
+		 * structure */
+		msg_mgr_obj = (struct msg_mgr_ *)hmsg_mgr;
+		msg_mgr_obj->intf_fxns = intf_fxns;
+
+		/* Finally, return the new message manager handle: */
+		*msg_man = hmsg_mgr;
+	} else {
+		status = -EPERM;
+	}
+	return status;
+}
+
+/*
+ *  ======== msg_delete ========
+ *  Purpose:
+ *      Delete a msg_ctrl manager allocated in msg_create().
+ */
+void msg_delete(struct msg_mgr *hmsg_mgr)
+{
+	struct msg_mgr_ *msg_mgr_obj = (struct msg_mgr_ *)hmsg_mgr;
+	struct bridge_drv_interface *intf_fxns;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (msg_mgr_obj) {
+		intf_fxns = msg_mgr_obj->intf_fxns;
+
+		/* Let Bridge message module destroy the msg_mgr: */
+		(*intf_fxns->pfn_msg_delete) (hmsg_mgr);
+	} else {
+		dev_dbg(bridge, "%s: Error hmsg_mgr handle: %p\n",
+			__func__, hmsg_mgr);
+	}
+}
+
+/*
+ *  ======== msg_exit ========
+ */
+void msg_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== msg_mod_init ========
+ */
+bool msg_mod_init(void)
+{
+	DBC_REQUIRE(refs >= 0);
+
+	refs++;
+
+	DBC_ENSURE(refs >= 0);
+
+	return true;
+}
diff --git a/drivers/staging/tidspbridge/pmgr/msgobj.h b/drivers/staging/tidspbridge/pmgr/msgobj.h
new file mode 100644
index 00000000000..14ca633c56c
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/msgobj.h
@@ -0,0 +1,38 @@
+/*
+ * msgobj.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Structure subcomponents of channel class library msg_ctrl objects which
+ * are exposed to DSP API from Bridge driver.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef MSGOBJ_
+#define MSGOBJ_
+
+#include <dspbridge/dspdefs.h>
+
+#include <dspbridge/msgdefs.h>
+
+/*
+ *  This struct is the first field in a msg_mgr struct. Other, implementation
+ *  specific fields follow this structure in memory.
+ */
+struct msg_mgr_ {
+	/* The first field must match that in _msg_sm.h */
+
+	/* Function interface to Bridge driver. */
+	struct bridge_drv_interface *intf_fxns;
+};
+
+#endif /* MSGOBJ_ */
diff --git a/drivers/staging/tidspbridge/rmgr/dbdcd.c b/drivers/staging/tidspbridge/rmgr/dbdcd.c
new file mode 100644
index 00000000000..f71e8606f95
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/dbdcd.c
@@ -0,0 +1,1512 @@
+/*
+ * dbdcd.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * This file contains the implementation of the DSP/BIOS Bridge
+ * Configuration Database (DCD).
+ *
+ * Notes:
+ *   The fxn dcd_get_objects can apply a callback fxn to each DCD object
+ *   that is located in a specified COFF file.  At the moment,
+ *   dcd_auto_register, dcd_auto_unregister, and NLDR module all use
+ *   dcd_get_objects.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/cod.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/uuidutil.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dbdcd.h>
+
+/*  ----------------------------------- Global defines. */
+#define MAX_INT2CHAR_LENGTH     16	/* Max int2char len of 32 bit int */
+
+/* Name of section containing dependent libraries */
+#define DEPLIBSECT		".dspbridge_deplibs"
+
+/* DCD specific structures. */
+struct dcd_manager {
+	struct cod_manager *cod_mgr;	/* Handle to COD manager object. */
+};
+
+/*  Pointer to the registry support key */
+static struct list_head reg_key_list;
+static DEFINE_SPINLOCK(dbdcd_lock);
+
+/* Global reference variables. */
+static u32 refs;
+static u32 enum_refs;
+
+/* Helper function prototypes. */
+static s32 atoi(char *psz_buf);
+static int get_attrs_from_buf(char *psz_buf, u32 ul_buf_size,
+				     enum dsp_dcdobjtype obj_type,
+				     struct dcd_genericobj *gen_obj);
+static void compress_buf(char *psz_buf, u32 ul_buf_size, s32 char_size);
+static char dsp_char2_gpp_char(char *word, s32 dsp_char_size);
+static int get_dep_lib_info(struct dcd_manager *hdcd_mgr,
+				   struct dsp_uuid *uuid_obj,
+				   u16 *num_libs,
+				   u16 *num_pers_libs,
+				   struct dsp_uuid *dep_lib_uuids,
+				   bool *prstnt_dep_libs,
+				   enum nldr_phase phase);
+
+/*
+ *  ======== dcd_auto_register ========
+ *  Purpose:
+ *      Parses the supplied image and resigsters with DCD.
+ */
+int dcd_auto_register(struct dcd_manager *hdcd_mgr,
+			     char *sz_coff_path)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (hdcd_mgr)
+		status = dcd_get_objects(hdcd_mgr, sz_coff_path,
+					 (dcd_registerfxn) dcd_register_object,
+					 (void *)sz_coff_path);
+	else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== dcd_auto_unregister ========
+ *  Purpose:
+ *      Parses the supplied DSP image and unresiters from DCD.
+ */
+int dcd_auto_unregister(struct dcd_manager *hdcd_mgr,
+			       char *sz_coff_path)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (hdcd_mgr)
+		status = dcd_get_objects(hdcd_mgr, sz_coff_path,
+					 (dcd_registerfxn) dcd_register_object,
+					 NULL);
+	else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== dcd_create_manager ========
+ *  Purpose:
+ *      Creates DCD manager.
+ */
+int dcd_create_manager(char *sz_zl_dll_name,
+			      struct dcd_manager **dcd_mgr)
+{
+	struct cod_manager *cod_mgr;	/* COD manager handle */
+	struct dcd_manager *dcd_mgr_obj = NULL;	/* DCD Manager pointer */
+	int status = 0;
+
+	DBC_REQUIRE(refs >= 0);
+	DBC_REQUIRE(dcd_mgr);
+
+	status = cod_create(&cod_mgr, sz_zl_dll_name, NULL);
+	if (status)
+		goto func_end;
+
+	/* Create a DCD object. */
+	dcd_mgr_obj = kzalloc(sizeof(struct dcd_manager), GFP_KERNEL);
+	if (dcd_mgr_obj != NULL) {
+		/* Fill out the object. */
+		dcd_mgr_obj->cod_mgr = cod_mgr;
+
+		/* Return handle to this DCD interface. */
+		*dcd_mgr = dcd_mgr_obj;
+	} else {
+		status = -ENOMEM;
+
+		/*
+		 * If allocation of DcdManager object failed, delete the
+		 * COD manager.
+		 */
+		cod_delete(cod_mgr);
+	}
+
+	DBC_ENSURE((!status) ||
+			((dcd_mgr_obj == NULL) && (status == -ENOMEM)));
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== dcd_destroy_manager ========
+ *  Purpose:
+ *      Frees DCD Manager object.
+ */
+int dcd_destroy_manager(struct dcd_manager *hdcd_mgr)
+{
+	struct dcd_manager *dcd_mgr_obj = hdcd_mgr;
+	int status = -EFAULT;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (hdcd_mgr) {
+		/* Delete the COD manager. */
+		cod_delete(dcd_mgr_obj->cod_mgr);
+
+		/* Deallocate a DCD manager object. */
+		kfree(dcd_mgr_obj);
+
+		status = 0;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dcd_enumerate_object ========
+ *  Purpose:
+ *      Enumerates objects in the DCD.
+ */
+int dcd_enumerate_object(s32 index, enum dsp_dcdobjtype obj_type,
+				struct dsp_uuid *uuid_obj)
+{
+	int status = 0;
+	char sz_reg_key[DCD_MAXPATHLENGTH];
+	char sz_value[DCD_MAXPATHLENGTH];
+	struct dsp_uuid dsp_uuid_obj;
+	char sz_obj_type[MAX_INT2CHAR_LENGTH];	/* str. rep. of obj_type. */
+	u32 dw_key_len = 0;
+	struct dcd_key_elem *dcd_key;
+	int len;
+
+	DBC_REQUIRE(refs >= 0);
+	DBC_REQUIRE(index >= 0);
+	DBC_REQUIRE(uuid_obj != NULL);
+
+	if ((index != 0) && (enum_refs == 0)) {
+		/*
+		 * If an enumeration is being performed on an index greater
+		 * than zero, then the current enum_refs must have been
+		 * incremented to greater than zero.
+		 */
+		status = -EIDRM;
+	} else {
+		/*
+		 * Pre-determine final key length. It's length of DCD_REGKEY +
+		 *  "_\0" + length of sz_obj_type string + terminating NULL.
+		 */
+		dw_key_len = strlen(DCD_REGKEY) + 1 + sizeof(sz_obj_type) + 1;
+		DBC_ASSERT(dw_key_len < DCD_MAXPATHLENGTH);
+
+		/* Create proper REG key; concatenate DCD_REGKEY with
+		 * obj_type. */
+		strncpy(sz_reg_key, DCD_REGKEY, strlen(DCD_REGKEY) + 1);
+		if ((strlen(sz_reg_key) + strlen("_\0")) <
+		    DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, "_\0", 2);
+		} else {
+			status = -EPERM;
+		}
+
+		/* This snprintf is guaranteed not to exceed max size of an
+		 * integer. */
+		status = snprintf(sz_obj_type, MAX_INT2CHAR_LENGTH, "%d",
+				  obj_type);
+
+		if (status == -1) {
+			status = -EPERM;
+		} else {
+			status = 0;
+			if ((strlen(sz_reg_key) + strlen(sz_obj_type)) <
+			    DCD_MAXPATHLENGTH) {
+				strncat(sz_reg_key, sz_obj_type,
+					strlen(sz_obj_type) + 1);
+			} else {
+				status = -EPERM;
+			}
+		}
+
+		if (!status) {
+			len = strlen(sz_reg_key);
+			spin_lock(&dbdcd_lock);
+			list_for_each_entry(dcd_key, &reg_key_list, link) {
+				if (!strncmp(dcd_key->name, sz_reg_key, len)
+						&& !index--) {
+					strncpy(sz_value, &dcd_key->name[len],
+					       strlen(&dcd_key->name[len]) + 1);
+						break;
+				}
+			}
+			spin_unlock(&dbdcd_lock);
+
+			if (&dcd_key->link == &reg_key_list)
+				status = -ENODATA;
+		}
+
+		if (!status) {
+			/* Create UUID value using string retrieved from
+			 * registry. */
+			uuid_uuid_from_string(sz_value, &dsp_uuid_obj);
+
+			*uuid_obj = dsp_uuid_obj;
+
+			/* Increment enum_refs to update reference count. */
+			enum_refs++;
+
+			status = 0;
+		} else if (status == -ENODATA) {
+			/* At the end of enumeration. Reset enum_refs. */
+			enum_refs = 0;
+
+			/*
+			 * TODO: Revisit, this is not an errror case but code
+			 * expects non-zero value.
+			 */
+			status = ENODATA;
+		} else {
+			status = -EPERM;
+		}
+	}
+
+	DBC_ENSURE(uuid_obj || (status == -EPERM));
+
+	return status;
+}
+
+/*
+ *  ======== dcd_exit ========
+ *  Purpose:
+ *      Discontinue usage of the DCD module.
+ */
+void dcd_exit(void)
+{
+	struct dcd_key_elem *rv, *rv_tmp;
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+	if (refs == 0) {
+		cod_exit();
+		list_for_each_entry_safe(rv, rv_tmp, &reg_key_list, link) {
+			list_del(&rv->link);
+			kfree(rv->path);
+			kfree(rv);
+		}
+	}
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== dcd_get_dep_libs ========
+ */
+int dcd_get_dep_libs(struct dcd_manager *hdcd_mgr,
+			    struct dsp_uuid *uuid_obj,
+			    u16 num_libs, struct dsp_uuid *dep_lib_uuids,
+			    bool *prstnt_dep_libs,
+			    enum nldr_phase phase)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdcd_mgr);
+	DBC_REQUIRE(uuid_obj != NULL);
+	DBC_REQUIRE(dep_lib_uuids != NULL);
+	DBC_REQUIRE(prstnt_dep_libs != NULL);
+
+	status =
+	    get_dep_lib_info(hdcd_mgr, uuid_obj, &num_libs, NULL, dep_lib_uuids,
+			     prstnt_dep_libs, phase);
+
+	return status;
+}
+
+/*
+ *  ======== dcd_get_num_dep_libs ========
+ */
+int dcd_get_num_dep_libs(struct dcd_manager *hdcd_mgr,
+				struct dsp_uuid *uuid_obj,
+				u16 *num_libs, u16 *num_pers_libs,
+				enum nldr_phase phase)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdcd_mgr);
+	DBC_REQUIRE(num_libs != NULL);
+	DBC_REQUIRE(num_pers_libs != NULL);
+	DBC_REQUIRE(uuid_obj != NULL);
+
+	status = get_dep_lib_info(hdcd_mgr, uuid_obj, num_libs, num_pers_libs,
+				  NULL, NULL, phase);
+
+	return status;
+}
+
+/*
+ *  ======== dcd_get_object_def ========
+ *  Purpose:
+ *      Retrieves the properties of a node or processor based on the UUID and
+ *      object type.
+ */
+int dcd_get_object_def(struct dcd_manager *hdcd_mgr,
+			      struct dsp_uuid *obj_uuid,
+			      enum dsp_dcdobjtype obj_type,
+			      struct dcd_genericobj *obj_def)
+{
+	struct dcd_manager *dcd_mgr_obj = hdcd_mgr;	/* ptr to DCD mgr */
+	struct cod_libraryobj *lib = NULL;
+	int status = 0;
+	u32 ul_addr = 0;	/* Used by cod_get_section */
+	u32 ul_len = 0;		/* Used by cod_get_section */
+	u32 dw_buf_size;	/* Used by REG functions */
+	char sz_reg_key[DCD_MAXPATHLENGTH];
+	char *sz_uuid;		/*[MAXUUIDLEN]; */
+	struct dcd_key_elem *dcd_key = NULL;
+	char sz_sect_name[MAXUUIDLEN + 2];	/* ".[UUID]\0" */
+	char *psz_coff_buf;
+	u32 dw_key_len;		/* Len of REG key. */
+	char sz_obj_type[MAX_INT2CHAR_LENGTH];	/* str. rep. of obj_type. */
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(obj_def != NULL);
+	DBC_REQUIRE(obj_uuid != NULL);
+
+	sz_uuid = kzalloc(MAXUUIDLEN, GFP_KERNEL);
+	if (!sz_uuid) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	if (!hdcd_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	/* Pre-determine final key length. It's length of DCD_REGKEY +
+	 *  "_\0" + length of sz_obj_type string + terminating NULL */
+	dw_key_len = strlen(DCD_REGKEY) + 1 + sizeof(sz_obj_type) + 1;
+	DBC_ASSERT(dw_key_len < DCD_MAXPATHLENGTH);
+
+	/* Create proper REG key; concatenate DCD_REGKEY with obj_type. */
+	strncpy(sz_reg_key, DCD_REGKEY, strlen(DCD_REGKEY) + 1);
+
+	if ((strlen(sz_reg_key) + strlen("_\0")) < DCD_MAXPATHLENGTH)
+		strncat(sz_reg_key, "_\0", 2);
+	else
+		status = -EPERM;
+
+	status = snprintf(sz_obj_type, MAX_INT2CHAR_LENGTH, "%d", obj_type);
+	if (status == -1) {
+		status = -EPERM;
+	} else {
+		status = 0;
+
+		if ((strlen(sz_reg_key) + strlen(sz_obj_type)) <
+		    DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, sz_obj_type,
+				strlen(sz_obj_type) + 1);
+		} else {
+			status = -EPERM;
+		}
+
+		/* Create UUID value to set in registry. */
+		uuid_uuid_to_string(obj_uuid, sz_uuid, MAXUUIDLEN);
+
+		if ((strlen(sz_reg_key) + MAXUUIDLEN) < DCD_MAXPATHLENGTH)
+			strncat(sz_reg_key, sz_uuid, MAXUUIDLEN);
+		else
+			status = -EPERM;
+
+		/* Retrieve paths from the registry based on struct dsp_uuid */
+		dw_buf_size = DCD_MAXPATHLENGTH;
+	}
+	if (!status) {
+		spin_lock(&dbdcd_lock);
+		list_for_each_entry(dcd_key, &reg_key_list, link) {
+			if (!strncmp(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1))
+				break;
+		}
+		spin_unlock(&dbdcd_lock);
+		if (&dcd_key->link == &reg_key_list) {
+			status = -ENOKEY;
+			goto func_end;
+		}
+	}
+
+
+	/* Open COFF file. */
+	status = cod_open(dcd_mgr_obj->cod_mgr, dcd_key->path,
+							COD_NOLOAD, &lib);
+	if (status) {
+		status = -EACCES;
+		goto func_end;
+	}
+
+	/* Ensure sz_uuid + 1 is not greater than sizeof sz_sect_name. */
+	DBC_ASSERT((strlen(sz_uuid) + 1) < sizeof(sz_sect_name));
+
+	/* Create section name based on node UUID. A period is
+	 * pre-pended to the UUID string to form the section name.
+	 * I.e. ".24BC8D90_BB45_11d4_B756_006008BDB66F" */
+	strncpy(sz_sect_name, ".", 2);
+	strncat(sz_sect_name, sz_uuid, strlen(sz_uuid));
+
+	/* Get section information. */
+	status = cod_get_section(lib, sz_sect_name, &ul_addr, &ul_len);
+	if (status) {
+		status = -EACCES;
+		goto func_end;
+	}
+
+	/* Allocate zeroed buffer. */
+	psz_coff_buf = kzalloc(ul_len + 4, GFP_KERNEL);
+#ifdef _DB_TIOMAP
+	if (strstr(dcd_key->path, "iva") == NULL) {
+		/* Locate section by objectID and read its content. */
+		status =
+		    cod_read_section(lib, sz_sect_name, psz_coff_buf, ul_len);
+	} else {
+		status =
+		    cod_read_section(lib, sz_sect_name, psz_coff_buf, ul_len);
+		dev_dbg(bridge, "%s: Skipped Byte swap for IVA!!\n", __func__);
+	}
+#else
+	status = cod_read_section(lib, sz_sect_name, psz_coff_buf, ul_len);
+#endif
+	if (!status) {
+		/* Compres DSP buffer to conform to PC format. */
+		if (strstr(dcd_key->path, "iva") == NULL) {
+			compress_buf(psz_coff_buf, ul_len, DSPWORDSIZE);
+		} else {
+			compress_buf(psz_coff_buf, ul_len, 1);
+			dev_dbg(bridge, "%s: Compressing IVA COFF buffer by 1 "
+				"for IVA!!\n", __func__);
+		}
+
+		/* Parse the content of the COFF buffer. */
+		status =
+		    get_attrs_from_buf(psz_coff_buf, ul_len, obj_type, obj_def);
+		if (status)
+			status = -EACCES;
+	} else {
+		status = -EACCES;
+	}
+
+	/* Free the previously allocated dynamic buffer. */
+	kfree(psz_coff_buf);
+func_end:
+	if (lib)
+		cod_close(lib);
+
+	kfree(sz_uuid);
+
+	return status;
+}
+
+/*
+ *  ======== dcd_get_objects ========
+ */
+int dcd_get_objects(struct dcd_manager *hdcd_mgr,
+			   char *sz_coff_path, dcd_registerfxn register_fxn,
+			   void *handle)
+{
+	struct dcd_manager *dcd_mgr_obj = hdcd_mgr;
+	int status = 0;
+	char *psz_coff_buf;
+	char *psz_cur;
+	struct cod_libraryobj *lib = NULL;
+	u32 ul_addr = 0;	/* Used by cod_get_section */
+	u32 ul_len = 0;		/* Used by cod_get_section */
+	char seps[] = ":, ";
+	char *token = NULL;
+	struct dsp_uuid dsp_uuid_obj;
+	s32 object_type;
+
+	DBC_REQUIRE(refs > 0);
+	if (!hdcd_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	/* Open DSP coff file, don't load symbols. */
+	status = cod_open(dcd_mgr_obj->cod_mgr, sz_coff_path, COD_NOLOAD, &lib);
+	if (status) {
+		status = -EACCES;
+		goto func_cont;
+	}
+
+	/* Get DCD_RESIGER_SECTION section information. */
+	status = cod_get_section(lib, DCD_REGISTER_SECTION, &ul_addr, &ul_len);
+	if (status || !(ul_len > 0)) {
+		status = -EACCES;
+		goto func_cont;
+	}
+
+	/* Allocate zeroed buffer. */
+	psz_coff_buf = kzalloc(ul_len + 4, GFP_KERNEL);
+#ifdef _DB_TIOMAP
+	if (strstr(sz_coff_path, "iva") == NULL) {
+		/* Locate section by objectID and read its content. */
+		status = cod_read_section(lib, DCD_REGISTER_SECTION,
+					  psz_coff_buf, ul_len);
+	} else {
+		dev_dbg(bridge, "%s: Skipped Byte swap for IVA!!\n", __func__);
+		status = cod_read_section(lib, DCD_REGISTER_SECTION,
+					  psz_coff_buf, ul_len);
+	}
+#else
+	status =
+	    cod_read_section(lib, DCD_REGISTER_SECTION, psz_coff_buf, ul_len);
+#endif
+	if (!status) {
+		/* Compress DSP buffer to conform to PC format. */
+		if (strstr(sz_coff_path, "iva") == NULL) {
+			compress_buf(psz_coff_buf, ul_len, DSPWORDSIZE);
+		} else {
+			compress_buf(psz_coff_buf, ul_len, 1);
+			dev_dbg(bridge, "%s: Compress COFF buffer with 1 word "
+				"for IVA!!\n", __func__);
+		}
+
+		/* Read from buffer and register object in buffer. */
+		psz_cur = psz_coff_buf;
+		while ((token = strsep(&psz_cur, seps)) && *token != '\0') {
+			/*  Retrieve UUID string. */
+			uuid_uuid_from_string(token, &dsp_uuid_obj);
+
+			/*  Retrieve object type */
+			token = strsep(&psz_cur, seps);
+
+			/*  Retrieve object type */
+			object_type = atoi(token);
+
+			/*
+			 *  Apply register_fxn to the found DCD object.
+			 *  Possible actions include:
+			 *
+			 *  1) Register found DCD object.
+			 *  2) Unregister found DCD object (when handle == NULL)
+			 *  3) Add overlay node.
+			 */
+			status =
+			    register_fxn(&dsp_uuid_obj, object_type, handle);
+			if (status) {
+				/* if error occurs, break from while loop. */
+				break;
+			}
+		}
+	} else {
+		status = -EACCES;
+	}
+
+	/* Free the previously allocated dynamic buffer. */
+	kfree(psz_coff_buf);
+func_cont:
+	if (lib)
+		cod_close(lib);
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== dcd_get_library_name ========
+ *  Purpose:
+ *      Retrieves the library name for the given UUID.
+ *
+ */
+int dcd_get_library_name(struct dcd_manager *hdcd_mgr,
+				struct dsp_uuid *uuid_obj,
+				char *str_lib_name,
+				u32 *buff_size,
+				enum nldr_phase phase, bool *phase_split)
+{
+	char sz_reg_key[DCD_MAXPATHLENGTH];
+	char sz_uuid[MAXUUIDLEN];
+	u32 dw_key_len;		/* Len of REG key. */
+	char sz_obj_type[MAX_INT2CHAR_LENGTH];	/* str. rep. of obj_type. */
+	int status = 0;
+	struct dcd_key_elem *dcd_key = NULL;
+
+	DBC_REQUIRE(uuid_obj != NULL);
+	DBC_REQUIRE(str_lib_name != NULL);
+	DBC_REQUIRE(buff_size != NULL);
+	DBC_REQUIRE(hdcd_mgr);
+
+	dev_dbg(bridge, "%s: hdcd_mgr %p, uuid_obj %p, str_lib_name %p,"
+		" buff_size %p\n", __func__, hdcd_mgr, uuid_obj, str_lib_name,
+		buff_size);
+
+	/*
+	 *  Pre-determine final key length. It's length of DCD_REGKEY +
+	 *  "_\0" + length of sz_obj_type string + terminating NULL.
+	 */
+	dw_key_len = strlen(DCD_REGKEY) + 1 + sizeof(sz_obj_type) + 1;
+	DBC_ASSERT(dw_key_len < DCD_MAXPATHLENGTH);
+
+	/* Create proper REG key; concatenate DCD_REGKEY with obj_type. */
+	strncpy(sz_reg_key, DCD_REGKEY, strlen(DCD_REGKEY) + 1);
+	if ((strlen(sz_reg_key) + strlen("_\0")) < DCD_MAXPATHLENGTH)
+		strncat(sz_reg_key, "_\0", 2);
+	else
+		status = -EPERM;
+
+	switch (phase) {
+	case NLDR_CREATE:
+		/* create phase type */
+		sprintf(sz_obj_type, "%d", DSP_DCDCREATELIBTYPE);
+		break;
+	case NLDR_EXECUTE:
+		/* execute phase type */
+		sprintf(sz_obj_type, "%d", DSP_DCDEXECUTELIBTYPE);
+		break;
+	case NLDR_DELETE:
+		/* delete phase type */
+		sprintf(sz_obj_type, "%d", DSP_DCDDELETELIBTYPE);
+		break;
+	case NLDR_NOPHASE:
+		/* known to be a dependent library */
+		sprintf(sz_obj_type, "%d", DSP_DCDLIBRARYTYPE);
+		break;
+	default:
+		status = -EINVAL;
+		DBC_ASSERT(false);
+	}
+	if (!status) {
+		if ((strlen(sz_reg_key) + strlen(sz_obj_type)) <
+		    DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, sz_obj_type,
+				strlen(sz_obj_type) + 1);
+		} else {
+			status = -EPERM;
+		}
+		/* Create UUID value to find match in registry. */
+		uuid_uuid_to_string(uuid_obj, sz_uuid, MAXUUIDLEN);
+		if ((strlen(sz_reg_key) + MAXUUIDLEN) < DCD_MAXPATHLENGTH)
+			strncat(sz_reg_key, sz_uuid, MAXUUIDLEN);
+		else
+			status = -EPERM;
+	}
+	if (!status) {
+		spin_lock(&dbdcd_lock);
+		list_for_each_entry(dcd_key, &reg_key_list, link) {
+			/*  See if the name matches. */
+			if (!strncmp(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1))
+				break;
+		}
+		spin_unlock(&dbdcd_lock);
+	}
+
+	if (&dcd_key->link == &reg_key_list)
+		status = -ENOKEY;
+
+	/* If can't find, phases might be registered as generic LIBRARYTYPE */
+	if (status && phase != NLDR_NOPHASE) {
+		if (phase_split)
+			*phase_split = false;
+
+		strncpy(sz_reg_key, DCD_REGKEY, strlen(DCD_REGKEY) + 1);
+		if ((strlen(sz_reg_key) + strlen("_\0")) <
+		    DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, "_\0", 2);
+		} else {
+			status = -EPERM;
+		}
+		sprintf(sz_obj_type, "%d", DSP_DCDLIBRARYTYPE);
+		if ((strlen(sz_reg_key) + strlen(sz_obj_type))
+		    < DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, sz_obj_type,
+				strlen(sz_obj_type) + 1);
+		} else {
+			status = -EPERM;
+		}
+		uuid_uuid_to_string(uuid_obj, sz_uuid, MAXUUIDLEN);
+		if ((strlen(sz_reg_key) + MAXUUIDLEN) < DCD_MAXPATHLENGTH)
+			strncat(sz_reg_key, sz_uuid, MAXUUIDLEN);
+		else
+			status = -EPERM;
+
+		spin_lock(&dbdcd_lock);
+		list_for_each_entry(dcd_key, &reg_key_list, link) {
+			/*  See if the name matches. */
+			if (!strncmp(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1))
+				break;
+		}
+		spin_unlock(&dbdcd_lock);
+
+		status = (&dcd_key->link != &reg_key_list) ?
+						0 : -ENOKEY;
+	}
+
+	if (!status)
+		memcpy(str_lib_name, dcd_key->path, strlen(dcd_key->path) + 1);
+	return status;
+}
+
+/*
+ *  ======== dcd_init ========
+ *  Purpose:
+ *      Initialize the DCD module.
+ */
+bool dcd_init(void)
+{
+	bool init_cod;
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (refs == 0) {
+		/* Initialize required modules. */
+		init_cod = cod_init();
+
+		if (!init_cod) {
+			ret = false;
+			/* Exit initialized modules. */
+			if (init_cod)
+				cod_exit();
+		}
+
+		INIT_LIST_HEAD(&reg_key_list);
+	}
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs == 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== dcd_register_object ========
+ *  Purpose:
+ *      Registers a node or a processor with the DCD.
+ *      If psz_path_name == NULL, unregister the specified DCD object.
+ */
+int dcd_register_object(struct dsp_uuid *uuid_obj,
+			       enum dsp_dcdobjtype obj_type,
+			       char *psz_path_name)
+{
+	int status = 0;
+	char sz_reg_key[DCD_MAXPATHLENGTH];
+	char sz_uuid[MAXUUIDLEN + 1];
+	u32 dw_path_size = 0;
+	u32 dw_key_len;		/* Len of REG key. */
+	char sz_obj_type[MAX_INT2CHAR_LENGTH];	/* str. rep. of obj_type. */
+	struct dcd_key_elem *dcd_key = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(uuid_obj != NULL);
+	DBC_REQUIRE((obj_type == DSP_DCDNODETYPE) ||
+		    (obj_type == DSP_DCDPROCESSORTYPE) ||
+		    (obj_type == DSP_DCDLIBRARYTYPE) ||
+		    (obj_type == DSP_DCDCREATELIBTYPE) ||
+		    (obj_type == DSP_DCDEXECUTELIBTYPE) ||
+		    (obj_type == DSP_DCDDELETELIBTYPE));
+
+	dev_dbg(bridge, "%s: object UUID %p, obj_type %d, szPathName %s\n",
+		__func__, uuid_obj, obj_type, psz_path_name);
+
+	/*
+	 * Pre-determine final key length. It's length of DCD_REGKEY +
+	 *  "_\0" + length of sz_obj_type string + terminating NULL.
+	 */
+	dw_key_len = strlen(DCD_REGKEY) + 1 + sizeof(sz_obj_type) + 1;
+	DBC_ASSERT(dw_key_len < DCD_MAXPATHLENGTH);
+
+	/* Create proper REG key; concatenate DCD_REGKEY with obj_type. */
+	strncpy(sz_reg_key, DCD_REGKEY, strlen(DCD_REGKEY) + 1);
+	if ((strlen(sz_reg_key) + strlen("_\0")) < DCD_MAXPATHLENGTH)
+		strncat(sz_reg_key, "_\0", 2);
+	else {
+		status = -EPERM;
+		goto func_end;
+	}
+
+	status = snprintf(sz_obj_type, MAX_INT2CHAR_LENGTH, "%d", obj_type);
+	if (status == -1) {
+		status = -EPERM;
+	} else {
+		status = 0;
+		if ((strlen(sz_reg_key) + strlen(sz_obj_type)) <
+		    DCD_MAXPATHLENGTH) {
+			strncat(sz_reg_key, sz_obj_type,
+				strlen(sz_obj_type) + 1);
+		} else
+			status = -EPERM;
+
+		/* Create UUID value to set in registry. */
+		uuid_uuid_to_string(uuid_obj, sz_uuid, MAXUUIDLEN);
+		if ((strlen(sz_reg_key) + MAXUUIDLEN) < DCD_MAXPATHLENGTH)
+			strncat(sz_reg_key, sz_uuid, MAXUUIDLEN);
+		else
+			status = -EPERM;
+	}
+
+	if (status)
+		goto func_end;
+
+	/*
+	 * If psz_path_name != NULL, perform registration, otherwise,
+	 * perform unregistration.
+	 */
+
+	if (psz_path_name) {
+		dw_path_size = strlen(psz_path_name) + 1;
+		spin_lock(&dbdcd_lock);
+		list_for_each_entry(dcd_key, &reg_key_list, link) {
+			/*  See if the name matches. */
+			if (!strncmp(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1))
+				break;
+		}
+		spin_unlock(&dbdcd_lock);
+		if (&dcd_key->link == &reg_key_list) {
+			/*
+			 * Add new reg value (UUID+obj_type)
+			 * with COFF path info
+			 */
+
+			dcd_key = kmalloc(sizeof(struct dcd_key_elem),
+								GFP_KERNEL);
+			if (!dcd_key) {
+				status = -ENOMEM;
+				goto func_end;
+			}
+
+			dcd_key->path = kmalloc(strlen(sz_reg_key) + 1,
+								GFP_KERNEL);
+
+			if (!dcd_key->path) {
+				kfree(dcd_key);
+				status = -ENOMEM;
+				goto func_end;
+			}
+
+			strncpy(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1);
+			strncpy(dcd_key->path, psz_path_name ,
+						dw_path_size);
+			spin_lock(&dbdcd_lock);
+			list_add_tail(&dcd_key->link, &reg_key_list);
+			spin_unlock(&dbdcd_lock);
+		} else {
+			/*  Make sure the new data is the same. */
+			if (strncmp(dcd_key->path, psz_path_name,
+							dw_path_size)) {
+				/*  The caller needs a different data size! */
+				kfree(dcd_key->path);
+				dcd_key->path = kmalloc(dw_path_size,
+								GFP_KERNEL);
+				if (dcd_key->path == NULL) {
+					status = -ENOMEM;
+					goto func_end;
+				}
+			}
+
+			/*  We have a match!  Copy out the data. */
+			memcpy(dcd_key->path, psz_path_name, dw_path_size);
+		}
+		dev_dbg(bridge, "%s: psz_path_name=%s, dw_path_size=%d\n",
+			__func__, psz_path_name, dw_path_size);
+	} else {
+		/* Deregister an existing object */
+		spin_lock(&dbdcd_lock);
+		list_for_each_entry(dcd_key, &reg_key_list, link) {
+			if (!strncmp(dcd_key->name, sz_reg_key,
+						strlen(sz_reg_key) + 1)) {
+				list_del(&dcd_key->link);
+				kfree(dcd_key->path);
+				kfree(dcd_key);
+				break;
+			}
+		}
+		spin_unlock(&dbdcd_lock);
+		if (&dcd_key->link == &reg_key_list)
+			status = -EPERM;
+	}
+
+	if (!status) {
+		/*
+		 *  Because the node database has been updated through a
+		 *  successful object registration/de-registration operation,
+		 *  we need to reset the object enumeration counter to allow
+		 *  current enumerations to reflect this update in the node
+		 *  database.
+		 */
+		enum_refs = 0;
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== dcd_unregister_object ========
+ *  Call DCD_Register object with psz_path_name set to NULL to
+ *  perform actual object de-registration.
+ */
+int dcd_unregister_object(struct dsp_uuid *uuid_obj,
+				 enum dsp_dcdobjtype obj_type)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(uuid_obj != NULL);
+	DBC_REQUIRE((obj_type == DSP_DCDNODETYPE) ||
+		    (obj_type == DSP_DCDPROCESSORTYPE) ||
+		    (obj_type == DSP_DCDLIBRARYTYPE) ||
+		    (obj_type == DSP_DCDCREATELIBTYPE) ||
+		    (obj_type == DSP_DCDEXECUTELIBTYPE) ||
+		    (obj_type == DSP_DCDDELETELIBTYPE));
+
+	/*
+	 *  When dcd_register_object is called with NULL as pathname,
+	 *  it indicates an unregister object operation.
+	 */
+	status = dcd_register_object(uuid_obj, obj_type, NULL);
+
+	return status;
+}
+
+/*
+ **********************************************************************
+ * DCD Helper Functions
+ **********************************************************************
+ */
+
+/*
+ *  ======== atoi ========
+ *  Purpose:
+ *      This function converts strings in decimal or hex format to integers.
+ */
+static s32 atoi(char *psz_buf)
+{
+	char *pch = psz_buf;
+	s32 base = 0;
+	unsigned long res;
+	int ret_val;
+
+	while (isspace(*pch))
+		pch++;
+
+	if (*pch == '-' || *pch == '+') {
+		base = 10;
+		pch++;
+	} else if (*pch && tolower(pch[strlen(pch) - 1]) == 'h') {
+		base = 16;
+	}
+
+	ret_val = strict_strtoul(pch, base, &res);
+
+	return ret_val ? : res;
+}
+
+/*
+ *  ======== get_attrs_from_buf ========
+ *  Purpose:
+ *      Parse the content of a buffer filled with DSP-side data and
+ *      retrieve an object's attributes from it. IMPORTANT: Assume the
+ *      buffer has been converted from DSP format to GPP format.
+ */
+static int get_attrs_from_buf(char *psz_buf, u32 ul_buf_size,
+				     enum dsp_dcdobjtype obj_type,
+				     struct dcd_genericobj *gen_obj)
+{
+	int status = 0;
+	char seps[] = ", ";
+	char *psz_cur;
+	char *token;
+	s32 token_len = 0;
+	u32 i = 0;
+#ifdef _DB_TIOMAP
+	s32 entry_id;
+#endif
+
+	DBC_REQUIRE(psz_buf != NULL);
+	DBC_REQUIRE(ul_buf_size != 0);
+	DBC_REQUIRE((obj_type == DSP_DCDNODETYPE)
+		    || (obj_type == DSP_DCDPROCESSORTYPE));
+	DBC_REQUIRE(gen_obj != NULL);
+
+	switch (obj_type) {
+	case DSP_DCDNODETYPE:
+		/*
+		 * Parse COFF sect buffer to retrieve individual tokens used
+		 * to fill in object attrs.
+		 */
+		psz_cur = psz_buf;
+		token = strsep(&psz_cur, seps);
+
+		/* u32 cb_struct */
+		gen_obj->obj_data.node_obj.ndb_props.cb_struct =
+		    (u32) atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* dsp_uuid ui_node_id */
+		uuid_uuid_from_string(token,
+				      &gen_obj->obj_data.node_obj.ndb_props.
+				      ui_node_id);
+		token = strsep(&psz_cur, seps);
+
+		/* ac_name */
+		DBC_REQUIRE(token);
+		token_len = strlen(token);
+		if (token_len > DSP_MAXNAMELEN - 1)
+			token_len = DSP_MAXNAMELEN - 1;
+
+		strncpy(gen_obj->obj_data.node_obj.ndb_props.ac_name,
+			token, token_len);
+		gen_obj->obj_data.node_obj.ndb_props.ac_name[token_len] = '\0';
+		token = strsep(&psz_cur, seps);
+		/* u32 ntype */
+		gen_obj->obj_data.node_obj.ndb_props.ntype = atoi(token);
+		token = strsep(&psz_cur, seps);
+		/* u32 cache_on_gpp */
+		gen_obj->obj_data.node_obj.ndb_props.cache_on_gpp = atoi(token);
+		token = strsep(&psz_cur, seps);
+		/* dsp_resourcereqmts dsp_resource_reqmts */
+		gen_obj->obj_data.node_obj.ndb_props.dsp_resource_reqmts.
+		    cb_struct = (u32) atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.static_data_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.global_data_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.program_mem_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.uwc_execution_time = atoi(token);
+		token = strsep(&psz_cur, seps);
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.uwc_period = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.uwc_deadline = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.avg_exection_time = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.node_obj.ndb_props.
+		    dsp_resource_reqmts.minimum_period = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* s32 prio */
+		gen_obj->obj_data.node_obj.ndb_props.prio = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 stack_size */
+		gen_obj->obj_data.node_obj.ndb_props.stack_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 sys_stack_size */
+		gen_obj->obj_data.node_obj.ndb_props.sys_stack_size =
+		    atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 stack_seg */
+		gen_obj->obj_data.node_obj.ndb_props.stack_seg = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 message_depth */
+		gen_obj->obj_data.node_obj.ndb_props.message_depth =
+		    atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 num_input_streams */
+		gen_obj->obj_data.node_obj.ndb_props.num_input_streams =
+		    atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 num_output_streams */
+		gen_obj->obj_data.node_obj.ndb_props.num_output_streams =
+		    atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* u32 utimeout */
+		gen_obj->obj_data.node_obj.ndb_props.utimeout = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* char *pstr_create_phase_fxn */
+		DBC_REQUIRE(token);
+		token_len = strlen(token);
+		gen_obj->obj_data.node_obj.pstr_create_phase_fxn =
+					kzalloc(token_len + 1, GFP_KERNEL);
+		strncpy(gen_obj->obj_data.node_obj.pstr_create_phase_fxn,
+			token, token_len);
+		gen_obj->obj_data.node_obj.pstr_create_phase_fxn[token_len] =
+		    '\0';
+		token = strsep(&psz_cur, seps);
+
+		/* char *pstr_execute_phase_fxn */
+		DBC_REQUIRE(token);
+		token_len = strlen(token);
+		gen_obj->obj_data.node_obj.pstr_execute_phase_fxn =
+					kzalloc(token_len + 1, GFP_KERNEL);
+		strncpy(gen_obj->obj_data.node_obj.pstr_execute_phase_fxn,
+			token, token_len);
+		gen_obj->obj_data.node_obj.pstr_execute_phase_fxn[token_len] =
+		    '\0';
+		token = strsep(&psz_cur, seps);
+
+		/* char *pstr_delete_phase_fxn */
+		DBC_REQUIRE(token);
+		token_len = strlen(token);
+		gen_obj->obj_data.node_obj.pstr_delete_phase_fxn =
+					kzalloc(token_len + 1, GFP_KERNEL);
+		strncpy(gen_obj->obj_data.node_obj.pstr_delete_phase_fxn,
+			token, token_len);
+		gen_obj->obj_data.node_obj.pstr_delete_phase_fxn[token_len] =
+		    '\0';
+		token = strsep(&psz_cur, seps);
+
+		/* Segment id for message buffers */
+		gen_obj->obj_data.node_obj.msg_segid = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* Message notification type */
+		gen_obj->obj_data.node_obj.msg_notify_type = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		/* char *pstr_i_alg_name */
+		if (token) {
+			token_len = strlen(token);
+			gen_obj->obj_data.node_obj.pstr_i_alg_name =
+					kzalloc(token_len + 1, GFP_KERNEL);
+			strncpy(gen_obj->obj_data.node_obj.pstr_i_alg_name,
+				token, token_len);
+			gen_obj->obj_data.node_obj.pstr_i_alg_name[token_len] =
+			    '\0';
+			token = strsep(&psz_cur, seps);
+		}
+
+		/* Load type (static, dynamic, or overlay) */
+		if (token) {
+			gen_obj->obj_data.node_obj.us_load_type = atoi(token);
+			token = strsep(&psz_cur, seps);
+		}
+
+		/* Dynamic load data requirements */
+		if (token) {
+			gen_obj->obj_data.node_obj.ul_data_mem_seg_mask =
+			    atoi(token);
+			token = strsep(&psz_cur, seps);
+		}
+
+		/* Dynamic load code requirements */
+		if (token) {
+			gen_obj->obj_data.node_obj.ul_code_mem_seg_mask =
+			    atoi(token);
+			token = strsep(&psz_cur, seps);
+		}
+
+		/* Extract node profiles into node properties */
+		if (token) {
+
+			gen_obj->obj_data.node_obj.ndb_props.count_profiles =
+			    atoi(token);
+			for (i = 0;
+			     i <
+			     gen_obj->obj_data.node_obj.
+			     ndb_props.count_profiles; i++) {
+				token = strsep(&psz_cur, seps);
+				if (token) {
+					/* Heap Size for the node */
+					gen_obj->obj_data.node_obj.
+					    ndb_props.node_profiles[i].
+					    ul_heap_size = atoi(token);
+				}
+			}
+		}
+		token = strsep(&psz_cur, seps);
+		if (token) {
+			gen_obj->obj_data.node_obj.ndb_props.stack_seg_name =
+			    (u32) (token);
+		}
+
+		break;
+
+	case DSP_DCDPROCESSORTYPE:
+		/*
+		 * Parse COFF sect buffer to retrieve individual tokens used
+		 * to fill in object attrs.
+		 */
+		psz_cur = psz_buf;
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.cb_struct = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.processor_family = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.processor_type = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.clock_rate = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.ul_internal_mem_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.ul_external_mem_size = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.processor_id = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.ty_running_rtos = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.node_min_priority = atoi(token);
+		token = strsep(&psz_cur, seps);
+
+		gen_obj->obj_data.proc_info.node_max_priority = atoi(token);
+
+#ifdef _DB_TIOMAP
+		/* Proc object may contain additional(extended) attributes. */
+		/* attr must match proc.hxx */
+		for (entry_id = 0; entry_id < 7; entry_id++) {
+			token = strsep(&psz_cur, seps);
+			gen_obj->obj_data.ext_proc_obj.ty_tlb[entry_id].
+			    ul_gpp_phys = atoi(token);
+
+			token = strsep(&psz_cur, seps);
+			gen_obj->obj_data.ext_proc_obj.ty_tlb[entry_id].
+			    ul_dsp_virt = atoi(token);
+		}
+#endif
+
+		break;
+
+	default:
+		status = -EPERM;
+		break;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== CompressBuffer ========
+ *  Purpose:
+ *      Compress the DSP buffer, if necessary, to conform to PC format.
+ */
+static void compress_buf(char *psz_buf, u32 ul_buf_size, s32 char_size)
+{
+	char *p;
+	char ch;
+	char *q;
+
+	p = psz_buf;
+	if (p == NULL)
+		return;
+
+	for (q = psz_buf; q < (psz_buf + ul_buf_size);) {
+		ch = dsp_char2_gpp_char(q, char_size);
+		if (ch == '\\') {
+			q += char_size;
+			ch = dsp_char2_gpp_char(q, char_size);
+			switch (ch) {
+			case 't':
+				*p = '\t';
+				break;
+
+			case 'n':
+				*p = '\n';
+				break;
+
+			case 'r':
+				*p = '\r';
+				break;
+
+			case '0':
+				*p = '\0';
+				break;
+
+			default:
+				*p = ch;
+				break;
+			}
+		} else {
+			*p = ch;
+		}
+		p++;
+		q += char_size;
+	}
+
+	/* NULL out remainder of buffer. */
+	while (p < q)
+		*p++ = '\0';
+}
+
+/*
+ *  ======== dsp_char2_gpp_char ========
+ *  Purpose:
+ *      Convert DSP char to host GPP char in a portable manner
+ */
+static char dsp_char2_gpp_char(char *word, s32 dsp_char_size)
+{
+	char ch = '\0';
+	char *ch_src;
+	s32 i;
+
+	for (ch_src = word, i = dsp_char_size; i > 0; i--)
+		ch |= *ch_src++;
+
+	return ch;
+}
+
+/*
+ *  ======== get_dep_lib_info ========
+ */
+static int get_dep_lib_info(struct dcd_manager *hdcd_mgr,
+				   struct dsp_uuid *uuid_obj,
+				   u16 *num_libs,
+				   u16 *num_pers_libs,
+				   struct dsp_uuid *dep_lib_uuids,
+				   bool *prstnt_dep_libs,
+				   enum nldr_phase phase)
+{
+	struct dcd_manager *dcd_mgr_obj = hdcd_mgr;
+	char *psz_coff_buf = NULL;
+	char *psz_cur;
+	char *psz_file_name = NULL;
+	struct cod_libraryobj *lib = NULL;
+	u32 ul_addr = 0;	/* Used by cod_get_section */
+	u32 ul_len = 0;		/* Used by cod_get_section */
+	u32 dw_data_size = COD_MAXPATHLENGTH;
+	char seps[] = ", ";
+	char *token = NULL;
+	bool get_uuids = (dep_lib_uuids != NULL);
+	u16 dep_libs = 0;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	DBC_REQUIRE(hdcd_mgr);
+	DBC_REQUIRE(num_libs != NULL);
+	DBC_REQUIRE(uuid_obj != NULL);
+
+	/*  Initialize to 0 dependent libraries, if only counting number of
+	 *  dependent libraries */
+	if (!get_uuids) {
+		*num_libs = 0;
+		*num_pers_libs = 0;
+	}
+
+	/* Allocate a buffer for file name */
+	psz_file_name = kzalloc(dw_data_size, GFP_KERNEL);
+	if (psz_file_name == NULL) {
+		status = -ENOMEM;
+	} else {
+		/* Get the name of the library */
+		status = dcd_get_library_name(hdcd_mgr, uuid_obj, psz_file_name,
+					      &dw_data_size, phase, NULL);
+	}
+
+	/* Open the library */
+	if (!status) {
+		status = cod_open(dcd_mgr_obj->cod_mgr, psz_file_name,
+				  COD_NOLOAD, &lib);
+	}
+	if (!status) {
+		/* Get dependent library section information. */
+		status = cod_get_section(lib, DEPLIBSECT, &ul_addr, &ul_len);
+
+		if (status) {
+			/* Ok, no dependent libraries */
+			ul_len = 0;
+			status = 0;
+		}
+	}
+
+	if (status || !(ul_len > 0))
+		goto func_cont;
+
+	/* Allocate zeroed buffer. */
+	psz_coff_buf = kzalloc(ul_len + 4, GFP_KERNEL);
+	if (psz_coff_buf == NULL)
+		status = -ENOMEM;
+
+	/* Read section contents. */
+	status = cod_read_section(lib, DEPLIBSECT, psz_coff_buf, ul_len);
+	if (status)
+		goto func_cont;
+
+	/* Compress and format DSP buffer to conform to PC format. */
+	compress_buf(psz_coff_buf, ul_len, DSPWORDSIZE);
+
+	/* Read from buffer */
+	psz_cur = psz_coff_buf;
+	while ((token = strsep(&psz_cur, seps)) && *token != '\0') {
+		if (get_uuids) {
+			if (dep_libs >= *num_libs) {
+				/* Gone beyond the limit */
+				break;
+			} else {
+				/* Retrieve UUID string. */
+				uuid_uuid_from_string(token,
+						      &(dep_lib_uuids
+							[dep_libs]));
+				/* Is this library persistent? */
+				token = strsep(&psz_cur, seps);
+				prstnt_dep_libs[dep_libs] = atoi(token);
+				dep_libs++;
+			}
+		} else {
+			/* Advanc to next token */
+			token = strsep(&psz_cur, seps);
+			if (atoi(token))
+				(*num_pers_libs)++;
+
+			/* Just counting number of dependent libraries */
+			(*num_libs)++;
+		}
+	}
+func_cont:
+	if (lib)
+		cod_close(lib);
+
+	/* Free previously allocated dynamic buffers. */
+	kfree(psz_file_name);
+
+	kfree(psz_coff_buf);
+
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/rmgr/disp.c b/drivers/staging/tidspbridge/rmgr/disp.c
new file mode 100644
index 00000000000..b7ce4353e06
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/disp.c
@@ -0,0 +1,752 @@
+/*
+ * disp.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Node Dispatcher interface. Communicates with Resource Manager Server
+ * (RMS) on DSP. Access to RMS is synchronized in NODE.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Link Driver */
+#include <dspbridge/dspdefs.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/chnldefs.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/nodedefs.h>
+#include <dspbridge/nodepriv.h>
+#include <dspbridge/rms_sh.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/disp.h>
+
+/* Size of a reply from RMS */
+#define REPLYSIZE (3 * sizeof(rms_word))
+
+/* Reserved channel offsets for communication with RMS */
+#define CHNLTORMSOFFSET       0
+#define CHNLFROMRMSOFFSET     1
+
+#define CHNLIOREQS      1
+
+/*
+ *  ======== disp_object ========
+ */
+struct disp_object {
+	struct dev_object *hdev_obj;	/* Device for this processor */
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+	struct chnl_mgr *hchnl_mgr;	/* Channel manager */
+	struct chnl_object *chnl_to_dsp;	/* Chnl for commands to RMS */
+	struct chnl_object *chnl_from_dsp;	/* Chnl for replies from RMS */
+	u8 *pbuf;		/* Buffer for commands, replies */
+	u32 ul_bufsize;		/* pbuf size in bytes */
+	u32 ul_bufsize_rms;	/* pbuf size in RMS words */
+	u32 char_size;		/* Size of DSP character */
+	u32 word_size;		/* Size of DSP word */
+	u32 data_mau_size;	/* Size of DSP Data MAU */
+};
+
+static u32 refs;
+
+static void delete_disp(struct disp_object *disp_obj);
+static int fill_stream_def(rms_word *pdw_buf, u32 *ptotal, u32 offset,
+				  struct node_strmdef strm_def, u32 max,
+				  u32 chars_in_rms_word);
+static int send_message(struct disp_object *disp_obj, u32 timeout,
+			       u32 ul_bytes, u32 *pdw_arg);
+
+/*
+ *  ======== disp_create ========
+ *  Create a NODE Dispatcher object.
+ */
+int disp_create(struct disp_object **dispatch_obj,
+		       struct dev_object *hdev_obj,
+		       const struct disp_attr *disp_attrs)
+{
+	struct disp_object *disp_obj;
+	struct bridge_drv_interface *intf_fxns;
+	u32 ul_chnl_id;
+	struct chnl_attr chnl_attr_obj;
+	int status = 0;
+	u8 dev_type;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dispatch_obj != NULL);
+	DBC_REQUIRE(disp_attrs != NULL);
+	DBC_REQUIRE(hdev_obj != NULL);
+
+	*dispatch_obj = NULL;
+
+	/* Allocate Node Dispatcher object */
+	disp_obj = kzalloc(sizeof(struct disp_object), GFP_KERNEL);
+	if (disp_obj == NULL)
+		status = -ENOMEM;
+	else
+		disp_obj->hdev_obj = hdev_obj;
+
+	/* Get Channel manager and Bridge function interface */
+	if (!status) {
+		status = dev_get_chnl_mgr(hdev_obj, &(disp_obj->hchnl_mgr));
+		if (!status) {
+			(void)dev_get_intf_fxns(hdev_obj, &intf_fxns);
+			disp_obj->intf_fxns = intf_fxns;
+		}
+	}
+
+	/* check device type and decide if streams or messag'ing is used for
+	 * RMS/EDS */
+	if (status)
+		goto func_cont;
+
+	status = dev_get_dev_type(hdev_obj, &dev_type);
+
+	if (status)
+		goto func_cont;
+
+	if (dev_type != DSP_UNIT) {
+		status = -EPERM;
+		goto func_cont;
+	}
+
+	disp_obj->char_size = DSPWORDSIZE;
+	disp_obj->word_size = DSPWORDSIZE;
+	disp_obj->data_mau_size = DSPWORDSIZE;
+	/* Open channels for communicating with the RMS */
+	chnl_attr_obj.uio_reqs = CHNLIOREQS;
+	chnl_attr_obj.event_obj = NULL;
+	ul_chnl_id = disp_attrs->ul_chnl_offset + CHNLTORMSOFFSET;
+	status = (*intf_fxns->pfn_chnl_open) (&(disp_obj->chnl_to_dsp),
+					      disp_obj->hchnl_mgr,
+					      CHNL_MODETODSP, ul_chnl_id,
+					      &chnl_attr_obj);
+
+	if (!status) {
+		ul_chnl_id = disp_attrs->ul_chnl_offset + CHNLFROMRMSOFFSET;
+		status =
+		    (*intf_fxns->pfn_chnl_open) (&(disp_obj->chnl_from_dsp),
+						 disp_obj->hchnl_mgr,
+						 CHNL_MODEFROMDSP, ul_chnl_id,
+						 &chnl_attr_obj);
+	}
+	if (!status) {
+		/* Allocate buffer for commands, replies */
+		disp_obj->ul_bufsize = disp_attrs->ul_chnl_buf_size;
+		disp_obj->ul_bufsize_rms = RMS_COMMANDBUFSIZE;
+		disp_obj->pbuf = kzalloc(disp_obj->ul_bufsize, GFP_KERNEL);
+		if (disp_obj->pbuf == NULL)
+			status = -ENOMEM;
+	}
+func_cont:
+	if (!status)
+		*dispatch_obj = disp_obj;
+	else
+		delete_disp(disp_obj);
+
+	DBC_ENSURE((status && *dispatch_obj == NULL) ||
+				(!status && *dispatch_obj));
+	return status;
+}
+
+/*
+ *  ======== disp_delete ========
+ *  Delete the NODE Dispatcher.
+ */
+void disp_delete(struct disp_object *disp_obj)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(disp_obj);
+
+	delete_disp(disp_obj);
+}
+
+/*
+ *  ======== disp_exit ========
+ *  Discontinue usage of DISP module.
+ */
+void disp_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== disp_init ========
+ *  Initialize the DISP module.
+ */
+bool disp_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+	return ret;
+}
+
+/*
+ *  ======== disp_node_change_priority ========
+ *  Change the priority of a node currently running on the target.
+ */
+int disp_node_change_priority(struct disp_object *disp_obj,
+				     struct node_object *hnode,
+				     u32 rms_fxn, nodeenv node_env, s32 prio)
+{
+	u32 dw_arg;
+	struct rms_command *rms_cmd;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(disp_obj);
+	DBC_REQUIRE(hnode != NULL);
+
+	/* Send message to RMS to change priority */
+	rms_cmd = (struct rms_command *)(disp_obj->pbuf);
+	rms_cmd->fxn = (rms_word) (rms_fxn);
+	rms_cmd->arg1 = (rms_word) node_env;
+	rms_cmd->arg2 = prio;
+	status = send_message(disp_obj, node_get_timeout(hnode),
+			      sizeof(struct rms_command), &dw_arg);
+
+	return status;
+}
+
+/*
+ *  ======== disp_node_create ========
+ *  Create a node on the DSP by remotely calling the node's create function.
+ */
+int disp_node_create(struct disp_object *disp_obj,
+			    struct node_object *hnode, u32 rms_fxn,
+			    u32 ul_create_fxn,
+			    const struct node_createargs *pargs,
+			    nodeenv *node_env)
+{
+	struct node_msgargs node_msg_args;
+	struct node_taskargs task_arg_obj;
+	struct rms_command *rms_cmd;
+	struct rms_msg_args *pmsg_args;
+	struct rms_more_task_args *more_task_args;
+	enum node_type node_type;
+	u32 dw_length;
+	rms_word *pdw_buf = NULL;
+	u32 ul_bytes;
+	u32 i;
+	u32 total;
+	u32 chars_in_rms_word;
+	s32 task_args_offset;
+	s32 sio_in_def_offset;
+	s32 sio_out_def_offset;
+	s32 sio_defs_offset;
+	s32 args_offset = -1;
+	s32 offset;
+	struct node_strmdef strm_def;
+	u32 max;
+	int status = 0;
+	struct dsp_nodeinfo node_info;
+	u8 dev_type;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(disp_obj);
+	DBC_REQUIRE(hnode != NULL);
+	DBC_REQUIRE(node_get_type(hnode) != NODE_DEVICE);
+	DBC_REQUIRE(node_env != NULL);
+
+	status = dev_get_dev_type(disp_obj->hdev_obj, &dev_type);
+
+	if (status)
+		goto func_end;
+
+	if (dev_type != DSP_UNIT) {
+		dev_dbg(bridge, "%s: unknown device type = 0x%x\n",
+			__func__, dev_type);
+		goto func_end;
+	}
+	DBC_REQUIRE(pargs != NULL);
+	node_type = node_get_type(hnode);
+	node_msg_args = pargs->asa.node_msg_args;
+	max = disp_obj->ul_bufsize_rms;	/*Max # of RMS words that can be sent */
+	DBC_ASSERT(max == RMS_COMMANDBUFSIZE);
+	chars_in_rms_word = sizeof(rms_word) / disp_obj->char_size;
+	/* Number of RMS words needed to hold arg data */
+	dw_length =
+	    (node_msg_args.arg_length + chars_in_rms_word -
+	     1) / chars_in_rms_word;
+	/* Make sure msg args and command fit in buffer */
+	total = sizeof(struct rms_command) / sizeof(rms_word) +
+	    sizeof(struct rms_msg_args)
+	    / sizeof(rms_word) - 1 + dw_length;
+	if (total >= max) {
+		status = -EPERM;
+		dev_dbg(bridge, "%s: Message args too large for buffer! size "
+			"= %d, max = %d\n", __func__, total, max);
+	}
+	/*
+	 *  Fill in buffer to send to RMS.
+	 *  The buffer will have the following  format:
+	 *
+	 *  RMS command:
+	 *      Address of RMS_CreateNode()
+	 *      Address of node's create function
+	 *      dummy argument
+	 *      node type
+	 *
+	 *  Message Args:
+	 *      max number of messages
+	 *      segid for message buffer allocation
+	 *      notification type to use when message is received
+	 *      length of message arg data
+	 *      message args data
+	 *
+	 *  Task Args (if task or socket node):
+	 *      priority
+	 *      stack size
+	 *      system stack size
+	 *      stack segment
+	 *      misc
+	 *      number of input streams
+	 *      pSTRMInDef[] - offsets of STRM definitions for input streams
+	 *      number of output streams
+	 *      pSTRMOutDef[] - offsets of STRM definitions for output
+	 *      streams
+	 *      STRMInDef[] - array of STRM definitions for input streams
+	 *      STRMOutDef[] - array of STRM definitions for output streams
+	 *
+	 *  Socket Args (if DAIS socket node):
+	 *
+	 */
+	if (!status) {
+		total = 0;	/* Total number of words in buffer so far */
+		pdw_buf = (rms_word *) disp_obj->pbuf;
+		rms_cmd = (struct rms_command *)pdw_buf;
+		rms_cmd->fxn = (rms_word) (rms_fxn);
+		rms_cmd->arg1 = (rms_word) (ul_create_fxn);
+		if (node_get_load_type(hnode) == NLDR_DYNAMICLOAD) {
+			/* Flush ICACHE on Load */
+			rms_cmd->arg2 = 1;	/* dummy argument */
+		} else {
+			/* Do not flush ICACHE */
+			rms_cmd->arg2 = 0;	/* dummy argument */
+		}
+		rms_cmd->data = node_get_type(hnode);
+		/*
+		 *  args_offset is the offset of the data field in struct
+		 *  rms_command structure. We need this to calculate stream
+		 *  definition offsets.
+		 */
+		args_offset = 3;
+		total += sizeof(struct rms_command) / sizeof(rms_word);
+		/* Message args */
+		pmsg_args = (struct rms_msg_args *)(pdw_buf + total);
+		pmsg_args->max_msgs = node_msg_args.max_msgs;
+		pmsg_args->segid = node_msg_args.seg_id;
+		pmsg_args->notify_type = node_msg_args.notify_type;
+		pmsg_args->arg_length = node_msg_args.arg_length;
+		total += sizeof(struct rms_msg_args) / sizeof(rms_word) - 1;
+		memcpy(pdw_buf + total, node_msg_args.pdata,
+		       node_msg_args.arg_length);
+		total += dw_length;
+	}
+	if (status)
+		goto func_end;
+
+	/* If node is a task node, copy task create arguments into  buffer */
+	if (node_type == NODE_TASK || node_type == NODE_DAISSOCKET) {
+		task_arg_obj = pargs->asa.task_arg_obj;
+		task_args_offset = total;
+		total += sizeof(struct rms_more_task_args) / sizeof(rms_word) +
+		    1 + task_arg_obj.num_inputs + task_arg_obj.num_outputs;
+		/* Copy task arguments */
+		if (total < max) {
+			total = task_args_offset;
+			more_task_args = (struct rms_more_task_args *)(pdw_buf +
+								       total);
+			/*
+			 * Get some important info about the node. Note that we
+			 * don't just reach into the hnode struct because
+			 * that would break the node object's abstraction.
+			 */
+			get_node_info(hnode, &node_info);
+			more_task_args->priority = node_info.execution_priority;
+			more_task_args->stack_size = task_arg_obj.stack_size;
+			more_task_args->sysstack_size =
+			    task_arg_obj.sys_stack_size;
+			more_task_args->stack_seg = task_arg_obj.stack_seg;
+			more_task_args->heap_addr = task_arg_obj.udsp_heap_addr;
+			more_task_args->heap_size = task_arg_obj.heap_size;
+			more_task_args->misc = task_arg_obj.ul_dais_arg;
+			more_task_args->num_input_streams =
+			    task_arg_obj.num_inputs;
+			total +=
+			    sizeof(struct rms_more_task_args) /
+			    sizeof(rms_word);
+			dev_dbg(bridge, "%s: udsp_heap_addr %x, heap_size %x\n",
+				__func__, task_arg_obj.udsp_heap_addr,
+				task_arg_obj.heap_size);
+			/* Keep track of pSIOInDef[] and pSIOOutDef[]
+			 * positions in the buffer, since this needs to be
+			 * filled in later. */
+			sio_in_def_offset = total;
+			total += task_arg_obj.num_inputs;
+			pdw_buf[total++] = task_arg_obj.num_outputs;
+			sio_out_def_offset = total;
+			total += task_arg_obj.num_outputs;
+			sio_defs_offset = total;
+			/* Fill SIO defs and offsets */
+			offset = sio_defs_offset;
+			for (i = 0; i < task_arg_obj.num_inputs; i++) {
+				if (status)
+					break;
+
+				pdw_buf[sio_in_def_offset + i] =
+				    (offset - args_offset)
+				    * (sizeof(rms_word) / DSPWORDSIZE);
+				strm_def = task_arg_obj.strm_in_def[i];
+				status =
+				    fill_stream_def(pdw_buf, &total, offset,
+						    strm_def, max,
+						    chars_in_rms_word);
+				offset = total;
+			}
+			for (i = 0; (i < task_arg_obj.num_outputs) &&
+			     (!status); i++) {
+				pdw_buf[sio_out_def_offset + i] =
+				    (offset - args_offset)
+				    * (sizeof(rms_word) / DSPWORDSIZE);
+				strm_def = task_arg_obj.strm_out_def[i];
+				status =
+				    fill_stream_def(pdw_buf, &total, offset,
+						    strm_def, max,
+						    chars_in_rms_word);
+				offset = total;
+			}
+		} else {
+			/* Args won't fit */
+			status = -EPERM;
+		}
+	}
+	if (!status) {
+		ul_bytes = total * sizeof(rms_word);
+		DBC_ASSERT(ul_bytes < (RMS_COMMANDBUFSIZE * sizeof(rms_word)));
+		status = send_message(disp_obj, node_get_timeout(hnode),
+				      ul_bytes, node_env);
+		if (status >= 0) {
+			/*
+			 * Message successfully received from RMS.
+			 * Return the status of the Node's create function
+			 * on the DSP-side
+			 */
+			status = (((rms_word *) (disp_obj->pbuf))[0]);
+			if (status < 0)
+				dev_dbg(bridge, "%s: DSP-side failed: 0x%x\n",
+					__func__, status);
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== disp_node_delete ========
+ *  purpose:
+ *      Delete a node on the DSP by remotely calling the node's delete function.
+ *
+ */
+int disp_node_delete(struct disp_object *disp_obj,
+			    struct node_object *hnode, u32 rms_fxn,
+			    u32 ul_delete_fxn, nodeenv node_env)
+{
+	u32 dw_arg;
+	struct rms_command *rms_cmd;
+	int status = 0;
+	u8 dev_type;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(disp_obj);
+	DBC_REQUIRE(hnode != NULL);
+
+	status = dev_get_dev_type(disp_obj->hdev_obj, &dev_type);
+
+	if (!status) {
+
+		if (dev_type == DSP_UNIT) {
+
+			/*
+			 *  Fill in buffer to send to RMS
+			 */
+			rms_cmd = (struct rms_command *)disp_obj->pbuf;
+			rms_cmd->fxn = (rms_word) (rms_fxn);
+			rms_cmd->arg1 = (rms_word) node_env;
+			rms_cmd->arg2 = (rms_word) (ul_delete_fxn);
+			rms_cmd->data = node_get_type(hnode);
+
+			status = send_message(disp_obj, node_get_timeout(hnode),
+					      sizeof(struct rms_command),
+					      &dw_arg);
+			if (status >= 0) {
+				/*
+				 * Message successfully received from RMS.
+				 * Return the status of the Node's delete
+				 * function on the DSP-side
+				 */
+				status = (((rms_word *) (disp_obj->pbuf))[0]);
+				if (status < 0)
+					dev_dbg(bridge, "%s: DSP-side failed: "
+						"0x%x\n", __func__, status);
+			}
+
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== disp_node_run ========
+ *  purpose:
+ *      Start execution of a node's execute phase, or resume execution of a node
+ *      that has been suspended (via DISP_NodePause()) on the DSP.
+ */
+int disp_node_run(struct disp_object *disp_obj,
+			 struct node_object *hnode, u32 rms_fxn,
+			 u32 ul_execute_fxn, nodeenv node_env)
+{
+	u32 dw_arg;
+	struct rms_command *rms_cmd;
+	int status = 0;
+	u8 dev_type;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(disp_obj);
+	DBC_REQUIRE(hnode != NULL);
+
+	status = dev_get_dev_type(disp_obj->hdev_obj, &dev_type);
+
+	if (!status) {
+
+		if (dev_type == DSP_UNIT) {
+
+			/*
+			 *  Fill in buffer to send to RMS.
+			 */
+			rms_cmd = (struct rms_command *)disp_obj->pbuf;
+			rms_cmd->fxn = (rms_word) (rms_fxn);
+			rms_cmd->arg1 = (rms_word) node_env;
+			rms_cmd->arg2 = (rms_word) (ul_execute_fxn);
+			rms_cmd->data = node_get_type(hnode);
+
+			status = send_message(disp_obj, node_get_timeout(hnode),
+					      sizeof(struct rms_command),
+					      &dw_arg);
+			if (status >= 0) {
+				/*
+				 * Message successfully received from RMS.
+				 * Return the status of the Node's execute
+				 * function on the DSP-side
+				 */
+				status = (((rms_word *) (disp_obj->pbuf))[0]);
+				if (status < 0)
+					dev_dbg(bridge, "%s: DSP-side failed: "
+						"0x%x\n", __func__, status);
+			}
+
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== delete_disp ========
+ *  purpose:
+ *      Frees the resources allocated for the dispatcher.
+ */
+static void delete_disp(struct disp_object *disp_obj)
+{
+	int status = 0;
+	struct bridge_drv_interface *intf_fxns;
+
+	if (disp_obj) {
+		intf_fxns = disp_obj->intf_fxns;
+
+		/* Free Node Dispatcher resources */
+		if (disp_obj->chnl_from_dsp) {
+			/* Channel close can fail only if the channel handle
+			 * is invalid. */
+			status = (*intf_fxns->pfn_chnl_close)
+			    (disp_obj->chnl_from_dsp);
+			if (status) {
+				dev_dbg(bridge, "%s: Failed to close channel "
+					"from RMS: 0x%x\n", __func__, status);
+			}
+		}
+		if (disp_obj->chnl_to_dsp) {
+			status =
+			    (*intf_fxns->pfn_chnl_close) (disp_obj->
+							  chnl_to_dsp);
+			if (status) {
+				dev_dbg(bridge, "%s: Failed to close channel to"
+					" RMS: 0x%x\n", __func__, status);
+			}
+		}
+		kfree(disp_obj->pbuf);
+
+		kfree(disp_obj);
+	}
+}
+
+/*
+ *  ======== fill_stream_def ========
+ *  purpose:
+ *      Fills stream definitions.
+ */
+static int fill_stream_def(rms_word *pdw_buf, u32 *ptotal, u32 offset,
+				  struct node_strmdef strm_def, u32 max,
+				  u32 chars_in_rms_word)
+{
+	struct rms_strm_def *strm_def_obj;
+	u32 total = *ptotal;
+	u32 name_len;
+	u32 dw_length;
+	int status = 0;
+
+	if (total + sizeof(struct rms_strm_def) / sizeof(rms_word) >= max) {
+		status = -EPERM;
+	} else {
+		strm_def_obj = (struct rms_strm_def *)(pdw_buf + total);
+		strm_def_obj->bufsize = strm_def.buf_size;
+		strm_def_obj->nbufs = strm_def.num_bufs;
+		strm_def_obj->segid = strm_def.seg_id;
+		strm_def_obj->align = strm_def.buf_alignment;
+		strm_def_obj->timeout = strm_def.utimeout;
+	}
+
+	if (!status) {
+		/*
+		 *  Since we haven't added the device name yet, subtract
+		 *  1 from total.
+		 */
+		total += sizeof(struct rms_strm_def) / sizeof(rms_word) - 1;
+		DBC_REQUIRE(strm_def.sz_device);
+		dw_length = strlen(strm_def.sz_device) + 1;
+
+		/* Number of RMS_WORDS needed to hold device name */
+		name_len =
+		    (dw_length + chars_in_rms_word - 1) / chars_in_rms_word;
+
+		if (total + name_len >= max) {
+			status = -EPERM;
+		} else {
+			/*
+			 *  Zero out last word, since the device name may not
+			 *  extend to completely fill this word.
+			 */
+			pdw_buf[total + name_len - 1] = 0;
+			/** TODO USE SERVICES * */
+			memcpy(pdw_buf + total, strm_def.sz_device, dw_length);
+			total += name_len;
+			*ptotal = total;
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== send_message ======
+ *  Send command message to RMS, get reply from RMS.
+ */
+static int send_message(struct disp_object *disp_obj, u32 timeout,
+			       u32 ul_bytes, u32 *pdw_arg)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct chnl_object *chnl_obj;
+	u32 dw_arg = 0;
+	u8 *pbuf;
+	struct chnl_ioc chnl_ioc_obj;
+	int status = 0;
+
+	DBC_REQUIRE(pdw_arg != NULL);
+
+	*pdw_arg = (u32) NULL;
+	intf_fxns = disp_obj->intf_fxns;
+	chnl_obj = disp_obj->chnl_to_dsp;
+	pbuf = disp_obj->pbuf;
+
+	/* Send the command */
+	status = (*intf_fxns->pfn_chnl_add_io_req) (chnl_obj, pbuf, ul_bytes, 0,
+						    0L, dw_arg);
+	if (status)
+		goto func_end;
+
+	status =
+	    (*intf_fxns->pfn_chnl_get_ioc) (chnl_obj, timeout, &chnl_ioc_obj);
+	if (!status) {
+		if (!CHNL_IS_IO_COMPLETE(chnl_ioc_obj)) {
+			if (CHNL_IS_TIMED_OUT(chnl_ioc_obj))
+				status = -ETIME;
+			else
+				status = -EPERM;
+		}
+	}
+	/* Get the reply */
+	if (status)
+		goto func_end;
+
+	chnl_obj = disp_obj->chnl_from_dsp;
+	ul_bytes = REPLYSIZE;
+	status = (*intf_fxns->pfn_chnl_add_io_req) (chnl_obj, pbuf, ul_bytes,
+						    0, 0L, dw_arg);
+	if (status)
+		goto func_end;
+
+	status =
+	    (*intf_fxns->pfn_chnl_get_ioc) (chnl_obj, timeout, &chnl_ioc_obj);
+	if (!status) {
+		if (CHNL_IS_TIMED_OUT(chnl_ioc_obj)) {
+			status = -ETIME;
+		} else if (chnl_ioc_obj.byte_size < ul_bytes) {
+			/* Did not get all of the reply from the RMS */
+			status = -EPERM;
+		} else {
+			if (CHNL_IS_IO_COMPLETE(chnl_ioc_obj)) {
+				DBC_ASSERT(chnl_ioc_obj.pbuf == pbuf);
+				status = (*((rms_word *) chnl_ioc_obj.pbuf));
+				*pdw_arg =
+				    (((rms_word *) (chnl_ioc_obj.pbuf))[1]);
+			} else {
+				status = -EPERM;
+			}
+		}
+	}
+func_end:
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
new file mode 100644
index 00000000000..8a8dea6efed
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -0,0 +1,929 @@
+/*
+ * drv.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge resource allocation module.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/list.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/drv.h>
+#include <dspbridge/dev.h>
+
+#include <dspbridge/node.h>
+#include <dspbridge/proc.h>
+#include <dspbridge/strm.h>
+#include <dspbridge/nodepriv.h>
+#include <dspbridge/dspchnl.h>
+#include <dspbridge/resourcecleanup.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+struct drv_object {
+	struct lst_list *dev_list;
+	struct lst_list *dev_node_string;
+};
+
+/*
+ *  This is the Device Extension. Named with the Prefix
+ *  DRV_ since it is living in this module
+ */
+struct drv_ext {
+	struct list_head link;
+	char sz_string[MAXREGPATHLENGTH];
+};
+
+/*  ----------------------------------- Globals */
+static s32 refs;
+static bool ext_phys_mem_pool_enabled;
+struct ext_phys_mem_pool {
+	u32 phys_mem_base;
+	u32 phys_mem_size;
+	u32 virt_mem_base;
+	u32 next_phys_alloc_ptr;
+};
+static struct ext_phys_mem_pool ext_mem_pool;
+
+/*  ----------------------------------- Function Prototypes */
+static int request_bridge_resources(struct cfg_hostres *res);
+
+
+/* GPP PROCESS CLEANUP CODE */
+
+static int drv_proc_free_node_res(int id, void *p, void *data);
+
+/* Allocate and add a node resource element
+* This function is called from .Node_Allocate. */
+int drv_insert_node_res_element(void *hnode, void *node_resource,
+				       void *process_ctxt)
+{
+	struct node_res_object **node_res_obj =
+	    (struct node_res_object **)node_resource;
+	struct process_context *ctxt = (struct process_context *)process_ctxt;
+	int status = 0;
+	int retval;
+
+	*node_res_obj = kzalloc(sizeof(struct node_res_object), GFP_KERNEL);
+	if (!*node_res_obj) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+
+	(*node_res_obj)->hnode = hnode;
+	retval = idr_get_new(ctxt->node_id, *node_res_obj,
+						&(*node_res_obj)->id);
+	if (retval == -EAGAIN) {
+		if (!idr_pre_get(ctxt->node_id, GFP_KERNEL)) {
+			pr_err("%s: OUT OF MEMORY\n", __func__);
+			status = -ENOMEM;
+			goto func_end;
+		}
+
+		retval = idr_get_new(ctxt->node_id, *node_res_obj,
+						&(*node_res_obj)->id);
+	}
+	if (retval) {
+		pr_err("%s: FAILED, IDR is FULL\n", __func__);
+		status = -EFAULT;
+	}
+func_end:
+	if (status)
+		kfree(*node_res_obj);
+
+	return status;
+}
+
+/* Release all Node resources and its context
+ * Actual Node De-Allocation */
+static int drv_proc_free_node_res(int id, void *p, void *data)
+{
+	struct process_context *ctxt = data;
+	int status;
+	struct node_res_object *node_res_obj = p;
+	u32 node_state;
+
+	if (node_res_obj->node_allocated) {
+		node_state = node_get_state(node_res_obj->hnode);
+		if (node_state <= NODE_DELETING) {
+			if ((node_state == NODE_RUNNING) ||
+			    (node_state == NODE_PAUSED) ||
+			    (node_state == NODE_TERMINATING))
+				node_terminate
+				    (node_res_obj->hnode, &status);
+
+			node_delete(node_res_obj, ctxt);
+		}
+	}
+
+	return 0;
+}
+
+/* Release all Mapped and Reserved DMM resources */
+int drv_remove_all_dmm_res_elements(void *process_ctxt)
+{
+	struct process_context *ctxt = (struct process_context *)process_ctxt;
+	int status = 0;
+	struct dmm_map_object *temp_map, *map_obj;
+	struct dmm_rsv_object *temp_rsv, *rsv_obj;
+
+	/* Free DMM mapped memory resources */
+	list_for_each_entry_safe(map_obj, temp_map, &ctxt->dmm_map_list, link) {
+		status = proc_un_map(ctxt->hprocessor,
+				     (void *)map_obj->dsp_addr, ctxt);
+		if (status)
+			pr_err("%s: proc_un_map failed!"
+			       " status = 0x%xn", __func__, status);
+	}
+
+	/* Free DMM reserved memory resources */
+	list_for_each_entry_safe(rsv_obj, temp_rsv, &ctxt->dmm_rsv_list, link) {
+		status = proc_un_reserve_memory(ctxt->hprocessor, (void *)
+						rsv_obj->dsp_reserved_addr,
+						ctxt);
+		if (status)
+			pr_err("%s: proc_un_reserve_memory failed!"
+			       " status = 0x%xn", __func__, status);
+	}
+	return status;
+}
+
+/* Update Node allocation status */
+void drv_proc_node_update_status(void *node_resource, s32 status)
+{
+	struct node_res_object *node_res_obj =
+	    (struct node_res_object *)node_resource;
+	DBC_ASSERT(node_resource != NULL);
+	node_res_obj->node_allocated = status;
+}
+
+/* Update Node Heap status */
+void drv_proc_node_update_heap_status(void *node_resource, s32 status)
+{
+	struct node_res_object *node_res_obj =
+	    (struct node_res_object *)node_resource;
+	DBC_ASSERT(node_resource != NULL);
+	node_res_obj->heap_allocated = status;
+}
+
+/* Release all Node resources and its context
+* This is called from .bridge_release.
+ */
+int drv_remove_all_node_res_elements(void *process_ctxt)
+{
+	struct process_context *ctxt = process_ctxt;
+
+	idr_for_each(ctxt->node_id, drv_proc_free_node_res, ctxt);
+	idr_destroy(ctxt->node_id);
+
+	return 0;
+}
+
+/* Allocate the STRM resource element
+* This is called after the actual resource is allocated
+ */
+int drv_proc_insert_strm_res_element(void *stream_obj,
+					    void *strm_res, void *process_ctxt)
+{
+	struct strm_res_object **pstrm_res =
+	    (struct strm_res_object **)strm_res;
+	struct process_context *ctxt = (struct process_context *)process_ctxt;
+	int status = 0;
+	int retval;
+
+	*pstrm_res = kzalloc(sizeof(struct strm_res_object), GFP_KERNEL);
+	if (*pstrm_res == NULL) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	(*pstrm_res)->hstream = stream_obj;
+	retval = idr_get_new(ctxt->stream_id, *pstrm_res,
+						&(*pstrm_res)->id);
+	if (retval == -EAGAIN) {
+		if (!idr_pre_get(ctxt->stream_id, GFP_KERNEL)) {
+			pr_err("%s: OUT OF MEMORY\n", __func__);
+			status = -ENOMEM;
+			goto func_end;
+		}
+
+		retval = idr_get_new(ctxt->stream_id, *pstrm_res,
+						&(*pstrm_res)->id);
+	}
+	if (retval) {
+		pr_err("%s: FAILED, IDR is FULL\n", __func__);
+		status = -EPERM;
+	}
+
+func_end:
+	return status;
+}
+
+static int drv_proc_free_strm_res(int id, void *p, void *process_ctxt)
+{
+	struct process_context *ctxt = process_ctxt;
+	struct strm_res_object *strm_res = p;
+	struct stream_info strm_info;
+	struct dsp_streaminfo user;
+	u8 **ap_buffer = NULL;
+	u8 *buf_ptr;
+	u32 ul_bytes;
+	u32 dw_arg;
+	s32 ul_buf_size;
+
+	if (strm_res->num_bufs) {
+		ap_buffer = kmalloc((strm_res->num_bufs *
+				       sizeof(u8 *)), GFP_KERNEL);
+		if (ap_buffer) {
+			strm_free_buffer(strm_res,
+						  ap_buffer,
+						  strm_res->num_bufs,
+						  ctxt);
+			kfree(ap_buffer);
+		}
+	}
+	strm_info.user_strm = &user;
+	user.number_bufs_in_stream = 0;
+	strm_get_info(strm_res->hstream, &strm_info, sizeof(strm_info));
+	while (user.number_bufs_in_stream--)
+		strm_reclaim(strm_res->hstream, &buf_ptr, &ul_bytes,
+			     (u32 *) &ul_buf_size, &dw_arg);
+	strm_close(strm_res, ctxt);
+	return 0;
+}
+
+/* Release all Stream resources and its context
+* This is called from .bridge_release.
+ */
+int drv_remove_all_strm_res_elements(void *process_ctxt)
+{
+	struct process_context *ctxt = process_ctxt;
+
+	idr_for_each(ctxt->stream_id, drv_proc_free_strm_res, ctxt);
+	idr_destroy(ctxt->stream_id);
+
+	return 0;
+}
+
+/* Updating the stream resource element */
+int drv_proc_update_strm_res(u32 num_bufs, void *strm_resources)
+{
+	int status = 0;
+	struct strm_res_object **strm_res =
+	    (struct strm_res_object **)strm_resources;
+
+	(*strm_res)->num_bufs = num_bufs;
+	return status;
+}
+
+/* GPP PROCESS CLEANUP CODE END */
+
+/*
+ *  ======== = drv_create ======== =
+ *  Purpose:
+ *      DRV Object gets created only once during Driver Loading.
+ */
+int drv_create(struct drv_object **drv_obj)
+{
+	int status = 0;
+	struct drv_object *pdrv_object = NULL;
+
+	DBC_REQUIRE(drv_obj != NULL);
+	DBC_REQUIRE(refs > 0);
+
+	pdrv_object = kzalloc(sizeof(struct drv_object), GFP_KERNEL);
+	if (pdrv_object) {
+		/* Create and Initialize List of device objects */
+		pdrv_object->dev_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		if (pdrv_object->dev_list) {
+			/* Create and Initialize List of device Extension */
+			pdrv_object->dev_node_string =
+				kzalloc(sizeof(struct lst_list), GFP_KERNEL);
+			if (!(pdrv_object->dev_node_string)) {
+				status = -EPERM;
+			} else {
+				INIT_LIST_HEAD(&pdrv_object->
+					       dev_node_string->head);
+				INIT_LIST_HEAD(&pdrv_object->dev_list->head);
+			}
+		} else {
+			status = -ENOMEM;
+		}
+	} else {
+		status = -ENOMEM;
+	}
+	/* Store the DRV Object in the Registry */
+	if (!status)
+		status = cfg_set_object((u32) pdrv_object, REG_DRV_OBJECT);
+	if (!status) {
+		*drv_obj = pdrv_object;
+	} else {
+		kfree(pdrv_object->dev_list);
+		kfree(pdrv_object->dev_node_string);
+		/* Free the DRV Object */
+		kfree(pdrv_object);
+	}
+
+	DBC_ENSURE(status || pdrv_object);
+	return status;
+}
+
+/*
+ *  ======== drv_exit ========
+ *  Purpose:
+ *      Discontinue usage of the DRV module.
+ */
+void drv_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== = drv_destroy ======== =
+ *  purpose:
+ *      Invoked during bridge de-initialization
+ */
+int drv_destroy(struct drv_object *driver_obj)
+{
+	int status = 0;
+	struct drv_object *pdrv_object = (struct drv_object *)driver_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pdrv_object);
+
+	/*
+	 *  Delete the List if it exists.Should not come here
+	 *  as the drv_remove_dev_object and the Last drv_request_resources
+	 *  removes the list if the lists are empty.
+	 */
+	kfree(pdrv_object->dev_list);
+	kfree(pdrv_object->dev_node_string);
+	kfree(pdrv_object);
+	/* Update the DRV Object in Registry to be 0 */
+	(void)cfg_set_object(0, REG_DRV_OBJECT);
+
+	return status;
+}
+
+/*
+ *  ======== drv_get_dev_object ========
+ *  Purpose:
+ *      Given a index, returns a handle to DevObject from the list.
+ */
+int drv_get_dev_object(u32 index, struct drv_object *hdrv_obj,
+			      struct dev_object **device_obj)
+{
+	int status = 0;
+#ifdef CONFIG_TIDSPBRIDGE_DEBUG
+	/* used only for Assertions and debug messages */
+	struct drv_object *pdrv_obj = (struct drv_object *)hdrv_obj;
+#endif
+	struct dev_object *dev_obj;
+	u32 i;
+	DBC_REQUIRE(pdrv_obj);
+	DBC_REQUIRE(device_obj != NULL);
+	DBC_REQUIRE(index >= 0);
+	DBC_REQUIRE(refs > 0);
+	DBC_ASSERT(!(LST_IS_EMPTY(pdrv_obj->dev_list)));
+
+	dev_obj = (struct dev_object *)drv_get_first_dev_object();
+	for (i = 0; i < index; i++) {
+		dev_obj =
+		    (struct dev_object *)drv_get_next_dev_object((u32) dev_obj);
+	}
+	if (dev_obj) {
+		*device_obj = (struct dev_object *)dev_obj;
+	} else {
+		*device_obj = NULL;
+		status = -EPERM;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== drv_get_first_dev_object ========
+ *  Purpose:
+ *      Retrieve the first Device Object handle from an internal linked list of
+ *      of DEV_OBJECTs maintained by DRV.
+ */
+u32 drv_get_first_dev_object(void)
+{
+	u32 dw_dev_object = 0;
+	struct drv_object *pdrv_obj;
+
+	if (!cfg_get_object((u32 *) &pdrv_obj, REG_DRV_OBJECT)) {
+		if ((pdrv_obj->dev_list != NULL) &&
+		    !LST_IS_EMPTY(pdrv_obj->dev_list))
+			dw_dev_object = (u32) lst_first(pdrv_obj->dev_list);
+	}
+
+	return dw_dev_object;
+}
+
+/*
+ *  ======== DRV_GetFirstDevNodeString ========
+ *  Purpose:
+ *      Retrieve the first Device Extension from an internal linked list of
+ *      of Pointer to dev_node Strings maintained by DRV.
+ */
+u32 drv_get_first_dev_extension(void)
+{
+	u32 dw_dev_extension = 0;
+	struct drv_object *pdrv_obj;
+
+	if (!cfg_get_object((u32 *) &pdrv_obj, REG_DRV_OBJECT)) {
+
+		if ((pdrv_obj->dev_node_string != NULL) &&
+		    !LST_IS_EMPTY(pdrv_obj->dev_node_string)) {
+			dw_dev_extension =
+			    (u32) lst_first(pdrv_obj->dev_node_string);
+		}
+	}
+
+	return dw_dev_extension;
+}
+
+/*
+ *  ======== drv_get_next_dev_object ========
+ *  Purpose:
+ *      Retrieve the next Device Object handle from an internal linked list of
+ *      of DEV_OBJECTs maintained by DRV, after having previously called
+ *      drv_get_first_dev_object() and zero or more DRV_GetNext.
+ */
+u32 drv_get_next_dev_object(u32 hdev_obj)
+{
+	u32 dw_next_dev_object = 0;
+	struct drv_object *pdrv_obj;
+
+	DBC_REQUIRE(hdev_obj != 0);
+
+	if (!cfg_get_object((u32 *) &pdrv_obj, REG_DRV_OBJECT)) {
+
+		if ((pdrv_obj->dev_list != NULL) &&
+		    !LST_IS_EMPTY(pdrv_obj->dev_list)) {
+			dw_next_dev_object = (u32) lst_next(pdrv_obj->dev_list,
+							    (struct list_head *)
+							    hdev_obj);
+		}
+	}
+	return dw_next_dev_object;
+}
+
+/*
+ *  ======== drv_get_next_dev_extension ========
+ *  Purpose:
+ *      Retrieve the next Device Extension from an internal linked list of
+ *      of pointer to DevNodeString maintained by DRV, after having previously
+ *      called drv_get_first_dev_extension() and zero or more
+ *      drv_get_next_dev_extension().
+ */
+u32 drv_get_next_dev_extension(u32 dev_extension)
+{
+	u32 dw_dev_extension = 0;
+	struct drv_object *pdrv_obj;
+
+	DBC_REQUIRE(dev_extension != 0);
+
+	if (!cfg_get_object((u32 *) &pdrv_obj, REG_DRV_OBJECT)) {
+		if ((pdrv_obj->dev_node_string != NULL) &&
+		    !LST_IS_EMPTY(pdrv_obj->dev_node_string)) {
+			dw_dev_extension =
+			    (u32) lst_next(pdrv_obj->dev_node_string,
+					   (struct list_head *)dev_extension);
+		}
+	}
+
+	return dw_dev_extension;
+}
+
+/*
+ *  ======== drv_init ========
+ *  Purpose:
+ *      Initialize DRV module private state.
+ */
+int drv_init(void)
+{
+	s32 ret = 1;		/* function return value */
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== drv_insert_dev_object ========
+ *  Purpose:
+ *      Insert a DevObject into the list of Manager object.
+ */
+int drv_insert_dev_object(struct drv_object *driver_obj,
+				 struct dev_object *hdev_obj)
+{
+	struct drv_object *pdrv_object = (struct drv_object *)driver_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hdev_obj != NULL);
+	DBC_REQUIRE(pdrv_object);
+	DBC_ASSERT(pdrv_object->dev_list);
+
+	lst_put_tail(pdrv_object->dev_list, (struct list_head *)hdev_obj);
+
+	DBC_ENSURE(!LST_IS_EMPTY(pdrv_object->dev_list));
+
+	return 0;
+}
+
+/*
+ *  ======== drv_remove_dev_object ========
+ *  Purpose:
+ *      Search for and remove a DeviceObject from the given list of DRV
+ *      objects.
+ */
+int drv_remove_dev_object(struct drv_object *driver_obj,
+				 struct dev_object *hdev_obj)
+{
+	int status = -EPERM;
+	struct drv_object *pdrv_object = (struct drv_object *)driver_obj;
+	struct list_head *cur_elem;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pdrv_object);
+	DBC_REQUIRE(hdev_obj != NULL);
+
+	DBC_REQUIRE(pdrv_object->dev_list != NULL);
+	DBC_REQUIRE(!LST_IS_EMPTY(pdrv_object->dev_list));
+
+	/* Search list for p_proc_object: */
+	for (cur_elem = lst_first(pdrv_object->dev_list); cur_elem != NULL;
+	     cur_elem = lst_next(pdrv_object->dev_list, cur_elem)) {
+		/* If found, remove it. */
+		if ((struct dev_object *)cur_elem == hdev_obj) {
+			lst_remove_elem(pdrv_object->dev_list, cur_elem);
+			status = 0;
+			break;
+		}
+	}
+	/* Remove list if empty. */
+	if (LST_IS_EMPTY(pdrv_object->dev_list)) {
+		kfree(pdrv_object->dev_list);
+		pdrv_object->dev_list = NULL;
+	}
+	DBC_ENSURE((pdrv_object->dev_list == NULL) ||
+		   !LST_IS_EMPTY(pdrv_object->dev_list));
+
+	return status;
+}
+
+/*
+ *  ======== drv_request_resources ========
+ *  Purpose:
+ *      Requests  resources from the OS.
+ */
+int drv_request_resources(u32 dw_context, u32 *dev_node_strg)
+{
+	int status = 0;
+	struct drv_object *pdrv_object;
+	struct drv_ext *pszdev_node;
+
+	DBC_REQUIRE(dw_context != 0);
+	DBC_REQUIRE(dev_node_strg != NULL);
+
+	/*
+	 *  Allocate memory to hold the string. This will live untill
+	 *  it is freed in the Release resources. Update the driver object
+	 *  list.
+	 */
+
+	status = cfg_get_object((u32 *) &pdrv_object, REG_DRV_OBJECT);
+	if (!status) {
+		pszdev_node = kzalloc(sizeof(struct drv_ext), GFP_KERNEL);
+		if (pszdev_node) {
+			lst_init_elem(&pszdev_node->link);
+			strncpy(pszdev_node->sz_string,
+				(char *)dw_context, MAXREGPATHLENGTH - 1);
+			pszdev_node->sz_string[MAXREGPATHLENGTH - 1] = '\0';
+			/* Update the Driver Object List */
+			*dev_node_strg = (u32) pszdev_node->sz_string;
+			lst_put_tail(pdrv_object->dev_node_string,
+				     (struct list_head *)pszdev_node);
+		} else {
+			status = -ENOMEM;
+			*dev_node_strg = 0;
+		}
+	} else {
+		dev_dbg(bridge, "%s: Failed to get Driver Object from Registry",
+			__func__);
+		*dev_node_strg = 0;
+	}
+
+	DBC_ENSURE((!status && dev_node_strg != NULL &&
+		    !LST_IS_EMPTY(pdrv_object->dev_node_string)) ||
+		   (status && *dev_node_strg == 0));
+
+	return status;
+}
+
+/*
+ *  ======== drv_release_resources ========
+ *  Purpose:
+ *      Releases  resources from the OS.
+ */
+int drv_release_resources(u32 dw_context, struct drv_object *hdrv_obj)
+{
+	int status = 0;
+	struct drv_object *pdrv_object = (struct drv_object *)hdrv_obj;
+	struct drv_ext *pszdev_node;
+
+	/*
+	 *  Irrespective of the status go ahead and clean it
+	 *  The following will over write the status.
+	 */
+	for (pszdev_node = (struct drv_ext *)drv_get_first_dev_extension();
+	     pszdev_node != NULL; pszdev_node = (struct drv_ext *)
+	     drv_get_next_dev_extension((u32) pszdev_node)) {
+		if (!pdrv_object->dev_node_string) {
+			/* When this could happen? */
+			continue;
+		}
+		if ((u32) pszdev_node == dw_context) {
+			/* Found it */
+			/* Delete from the Driver object list */
+			lst_remove_elem(pdrv_object->dev_node_string,
+					(struct list_head *)pszdev_node);
+			kfree((void *)pszdev_node);
+			break;
+		}
+		/* Delete the List if it is empty */
+		if (LST_IS_EMPTY(pdrv_object->dev_node_string)) {
+			kfree(pdrv_object->dev_node_string);
+			pdrv_object->dev_node_string = NULL;
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== request_bridge_resources ========
+ *  Purpose:
+ *      Reserves shared memory for bridge.
+ */
+static int request_bridge_resources(struct cfg_hostres *res)
+{
+	struct cfg_hostres *host_res = res;
+
+	/* num_mem_windows must not be more than CFG_MAXMEMREGISTERS */
+	host_res->num_mem_windows = 2;
+
+	/* First window is for DSP internal memory */
+	host_res->dw_sys_ctrl_base = ioremap(OMAP_SYSC_BASE, OMAP_SYSC_SIZE);
+	dev_dbg(bridge, "dw_mem_base[0] 0x%x\n", host_res->dw_mem_base[0]);
+	dev_dbg(bridge, "dw_mem_base[3] 0x%x\n", host_res->dw_mem_base[3]);
+	dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
+
+	/* for 24xx base port is not mapping the mamory for DSP
+	 * internal memory TODO Do a ioremap here */
+	/* Second window is for DSP external memory shared with MPU */
+
+	/* These are hard-coded values */
+	host_res->birq_registers = 0;
+	host_res->birq_attrib = 0;
+	host_res->dw_offset_for_monitor = 0;
+	host_res->dw_chnl_offset = 0;
+	/* CHNL_MAXCHANNELS */
+	host_res->dw_num_chnls = CHNL_MAXCHANNELS;
+	host_res->dw_chnl_buf_size = 0x400;
+
+	return 0;
+}
+
+/*
+ *  ======== drv_request_bridge_res_dsp ========
+ *  Purpose:
+ *      Reserves shared memory for bridge.
+ */
+int drv_request_bridge_res_dsp(void **phost_resources)
+{
+	int status = 0;
+	struct cfg_hostres *host_res;
+	u32 dw_buff_size;
+	u32 dma_addr;
+	u32 shm_size;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	dw_buff_size = sizeof(struct cfg_hostres);
+
+	host_res = kzalloc(dw_buff_size, GFP_KERNEL);
+
+	if (host_res != NULL) {
+		request_bridge_resources(host_res);
+		/* num_mem_windows must not be more than CFG_MAXMEMREGISTERS */
+		host_res->num_mem_windows = 4;
+
+		host_res->dw_mem_base[0] = 0;
+		host_res->dw_mem_base[2] = (u32) ioremap(OMAP_DSP_MEM1_BASE,
+							 OMAP_DSP_MEM1_SIZE);
+		host_res->dw_mem_base[3] = (u32) ioremap(OMAP_DSP_MEM2_BASE,
+							 OMAP_DSP_MEM2_SIZE);
+		host_res->dw_mem_base[4] = (u32) ioremap(OMAP_DSP_MEM3_BASE,
+							 OMAP_DSP_MEM3_SIZE);
+		host_res->dw_per_base = ioremap(OMAP_PER_CM_BASE,
+						OMAP_PER_CM_SIZE);
+		host_res->dw_per_pm_base = (u32) ioremap(OMAP_PER_PRM_BASE,
+							 OMAP_PER_PRM_SIZE);
+		host_res->dw_core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
+							  OMAP_CORE_PRM_SIZE);
+		host_res->dw_dmmu_base = ioremap(OMAP_DMMU_BASE,
+						 OMAP_DMMU_SIZE);
+
+		dev_dbg(bridge, "dw_mem_base[0] 0x%x\n",
+			host_res->dw_mem_base[0]);
+		dev_dbg(bridge, "dw_mem_base[1] 0x%x\n",
+			host_res->dw_mem_base[1]);
+		dev_dbg(bridge, "dw_mem_base[2] 0x%x\n",
+			host_res->dw_mem_base[2]);
+		dev_dbg(bridge, "dw_mem_base[3] 0x%x\n",
+			host_res->dw_mem_base[3]);
+		dev_dbg(bridge, "dw_mem_base[4] 0x%x\n",
+			host_res->dw_mem_base[4]);
+		dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
+
+		shm_size = drv_datap->shm_size;
+		if (shm_size >= 0x10000) {
+			/* Allocate Physically contiguous,
+			 * non-cacheable  memory */
+			host_res->dw_mem_base[1] =
+			    (u32) mem_alloc_phys_mem(shm_size, 0x100000,
+						     &dma_addr);
+			if (host_res->dw_mem_base[1] == 0) {
+				status = -ENOMEM;
+				pr_err("shm reservation Failed\n");
+			} else {
+				host_res->dw_mem_length[1] = shm_size;
+				host_res->dw_mem_phys[1] = dma_addr;
+
+				dev_dbg(bridge, "%s: Bridge shm address 0x%x "
+					"dma_addr %x size %x\n", __func__,
+					host_res->dw_mem_base[1],
+					dma_addr, shm_size);
+			}
+		}
+		if (!status) {
+			/* These are hard-coded values */
+			host_res->birq_registers = 0;
+			host_res->birq_attrib = 0;
+			host_res->dw_offset_for_monitor = 0;
+			host_res->dw_chnl_offset = 0;
+			/* CHNL_MAXCHANNELS */
+			host_res->dw_num_chnls = CHNL_MAXCHANNELS;
+			host_res->dw_chnl_buf_size = 0x400;
+			dw_buff_size = sizeof(struct cfg_hostres);
+		}
+		*phost_resources = host_res;
+	}
+	/* End Mem alloc */
+	return status;
+}
+
+void mem_ext_phys_pool_init(u32 pool_phys_base, u32 pool_size)
+{
+	u32 pool_virt_base;
+
+	/* get the virtual address for the physical memory pool passed */
+	pool_virt_base = (u32) ioremap(pool_phys_base, pool_size);
+
+	if ((void **)pool_virt_base == NULL) {
+		pr_err("%s: external physical memory map failed\n", __func__);
+		ext_phys_mem_pool_enabled = false;
+	} else {
+		ext_mem_pool.phys_mem_base = pool_phys_base;
+		ext_mem_pool.phys_mem_size = pool_size;
+		ext_mem_pool.virt_mem_base = pool_virt_base;
+		ext_mem_pool.next_phys_alloc_ptr = pool_phys_base;
+		ext_phys_mem_pool_enabled = true;
+	}
+}
+
+void mem_ext_phys_pool_release(void)
+{
+	if (ext_phys_mem_pool_enabled) {
+		iounmap((void *)(ext_mem_pool.virt_mem_base));
+		ext_phys_mem_pool_enabled = false;
+	}
+}
+
+/*
+ *  ======== mem_ext_phys_mem_alloc ========
+ *  Purpose:
+ *     Allocate physically contiguous, uncached memory from external memory pool
+ */
+
+static void *mem_ext_phys_mem_alloc(u32 bytes, u32 align, u32 * phys_addr)
+{
+	u32 new_alloc_ptr;
+	u32 offset;
+	u32 virt_addr;
+
+	if (align == 0)
+		align = 1;
+
+	if (bytes > ((ext_mem_pool.phys_mem_base + ext_mem_pool.phys_mem_size)
+		     - ext_mem_pool.next_phys_alloc_ptr)) {
+		phys_addr = NULL;
+		return NULL;
+	} else {
+		offset = (ext_mem_pool.next_phys_alloc_ptr & (align - 1));
+		if (offset == 0)
+			new_alloc_ptr = ext_mem_pool.next_phys_alloc_ptr;
+		else
+			new_alloc_ptr = (ext_mem_pool.next_phys_alloc_ptr) +
+			    (align - offset);
+		if ((new_alloc_ptr + bytes) <=
+		    (ext_mem_pool.phys_mem_base + ext_mem_pool.phys_mem_size)) {
+			/* we can allocate */
+			*phys_addr = new_alloc_ptr;
+			ext_mem_pool.next_phys_alloc_ptr =
+			    new_alloc_ptr + bytes;
+			virt_addr =
+			    ext_mem_pool.virt_mem_base + (new_alloc_ptr -
+							  ext_mem_pool.
+							  phys_mem_base);
+			return (void *)virt_addr;
+		} else {
+			*phys_addr = 0;
+			return NULL;
+		}
+	}
+}
+
+/*
+ *  ======== mem_alloc_phys_mem ========
+ *  Purpose:
+ *      Allocate physically contiguous, uncached memory
+ */
+void *mem_alloc_phys_mem(u32 byte_size, u32 align_mask,
+				u32 *physical_address)
+{
+	void *va_mem = NULL;
+	dma_addr_t pa_mem;
+
+	if (byte_size > 0) {
+		if (ext_phys_mem_pool_enabled) {
+			va_mem = mem_ext_phys_mem_alloc(byte_size, align_mask,
+							(u32 *) &pa_mem);
+		} else
+			va_mem = dma_alloc_coherent(NULL, byte_size, &pa_mem,
+								GFP_KERNEL);
+		if (va_mem == NULL)
+			*physical_address = 0;
+		else
+			*physical_address = pa_mem;
+	}
+	return va_mem;
+}
+
+/*
+ *  ======== mem_free_phys_mem ========
+ *  Purpose:
+ *      Free the given block of physically contiguous memory.
+ */
+void mem_free_phys_mem(void *virtual_address, u32 physical_address,
+		       u32 byte_size)
+{
+	DBC_REQUIRE(virtual_address != NULL);
+
+	if (!ext_phys_mem_pool_enabled)
+		dma_free_coherent(NULL, byte_size, virtual_address,
+				  physical_address);
+}
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
new file mode 100644
index 00000000000..7ee89492a75
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -0,0 +1,656 @@
+/*
+ * drv_interface.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge driver interface.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- Host OS */
+
+#include <dspbridge/host_os.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#ifdef MODULE
+#include <linux/module.h>
+#endif
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/cdev.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/services.h>
+#include <dspbridge/clk.h>
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dspapi-ioctl.h>
+#include <dspbridge/dspapi.h>
+#include <dspbridge/dspdrv.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/pwr.h>
+
+/*  ----------------------------------- This */
+#include <drv_interface.h>
+
+#include <dspbridge/cfg.h>
+#include <dspbridge/resourcecleanup.h>
+#include <dspbridge/chnl.h>
+#include <dspbridge/proc.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/drvdefs.h>
+#include <dspbridge/drv.h>
+
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+#include <mach-omap2/omap3-opp.h>
+#endif
+
+#define BRIDGE_NAME "C6410"
+/*  ----------------------------------- Globals */
+#define DRIVER_NAME  "DspBridge"
+#define DSPBRIDGE_VERSION	"0.3"
+s32 dsp_debug;
+
+struct platform_device *omap_dspbridge_dev;
+struct device *bridge;
+
+/* This is a test variable used by Bridge to test different sleep states */
+s32 dsp_test_sleepstate;
+
+static struct cdev bridge_cdev;
+
+static struct class *bridge_class;
+
+static u32 driver_context;
+static s32 driver_major;
+static char *base_img;
+char *iva_img;
+static s32 shm_size = 0x500000;	/* 5 MB */
+static int tc_wordswapon;	/* Default value is always false */
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+#define REC_TIMEOUT 5000	/*recovery timeout in msecs */
+static atomic_t bridge_cref;	/* number of bridge open handles */
+static struct workqueue_struct *bridge_rec_queue;
+static struct work_struct bridge_recovery_work;
+static DECLARE_COMPLETION(bridge_comp);
+static DECLARE_COMPLETION(bridge_open_comp);
+static bool recover;
+#endif
+
+#ifdef CONFIG_PM
+struct omap34_xx_bridge_suspend_data {
+	int suspended;
+	wait_queue_head_t suspend_wq;
+};
+
+static struct omap34_xx_bridge_suspend_data bridge_suspend_data;
+
+static int omap34_xxbridge_suspend_lockout(struct omap34_xx_bridge_suspend_data
+					   *s, struct file *f)
+{
+	if ((s)->suspended) {
+		if ((f)->f_flags & O_NONBLOCK)
+			return -EPERM;
+		wait_event_interruptible((s)->suspend_wq, (s)->suspended == 0);
+	}
+	return 0;
+}
+#endif
+
+module_param(dsp_debug, int, 0);
+MODULE_PARM_DESC(dsp_debug, "Wait after loading DSP image. default = false");
+
+module_param(dsp_test_sleepstate, int, 0);
+MODULE_PARM_DESC(dsp_test_sleepstate, "DSP Sleep state = 0");
+
+module_param(base_img, charp, 0);
+MODULE_PARM_DESC(base_img, "DSP base image, default = NULL");
+
+module_param(shm_size, int, 0);
+MODULE_PARM_DESC(shm_size, "shm size, default = 4 MB, minimum = 64 KB");
+
+module_param(tc_wordswapon, int, 0);
+MODULE_PARM_DESC(tc_wordswapon, "TC Word Swap Option. default = 0");
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DSPBRIDGE_VERSION);
+
+static char *driver_name = DRIVER_NAME;
+
+static const struct file_operations bridge_fops = {
+	.open = bridge_open,
+	.release = bridge_release,
+	.unlocked_ioctl = bridge_ioctl,
+	.mmap = bridge_mmap,
+};
+
+#ifdef CONFIG_PM
+static u32 time_out = 1000;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+s32 dsp_max_opps = VDD1_OPP5;
+#endif
+
+/* Maximum Opps that can be requested by IVA */
+/*vdd1 rate table */
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+const struct omap_opp vdd1_rate_table_bridge[] = {
+	{0, 0, 0},
+	/*OPP1 */
+	{S125M, VDD1_OPP1, 0},
+	/*OPP2 */
+	{S250M, VDD1_OPP2, 0},
+	/*OPP3 */
+	{S500M, VDD1_OPP3, 0},
+	/*OPP4 */
+	{S550M, VDD1_OPP4, 0},
+	/*OPP5 */
+	{S600M, VDD1_OPP5, 0},
+};
+#endif
+#endif
+
+struct dspbridge_platform_data *omap_dspbridge_pdata;
+
+u32 vdd1_dsp_freq[6][4] = {
+	{0, 0, 0, 0},
+	/*OPP1 */
+	{0, 90000, 0, 86000},
+	/*OPP2 */
+	{0, 180000, 80000, 170000},
+	/*OPP3 */
+	{0, 360000, 160000, 340000},
+	/*OPP4 */
+	{0, 396000, 325000, 376000},
+	/*OPP5 */
+	{0, 430000, 355000, 430000},
+};
+
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+static void bridge_recover(struct work_struct *work)
+{
+	struct dev_object *dev;
+	struct cfg_devnode *dev_node;
+	if (atomic_read(&bridge_cref)) {
+		INIT_COMPLETION(bridge_comp);
+		while (!wait_for_completion_timeout(&bridge_comp,
+						msecs_to_jiffies(REC_TIMEOUT)))
+			pr_info("%s:%d handle(s) still opened\n",
+					__func__, atomic_read(&bridge_cref));
+	}
+	dev = dev_get_first();
+	dev_get_dev_node(dev, &dev_node);
+	if (!dev_node || proc_auto_start(dev_node, dev))
+		pr_err("DSP could not be restarted\n");
+	recover = false;
+	complete_all(&bridge_open_comp);
+}
+
+void bridge_recover_schedule(void)
+{
+	INIT_COMPLETION(bridge_open_comp);
+	recover = true;
+	queue_work(bridge_rec_queue, &bridge_recovery_work);
+}
+#endif
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+static int dspbridge_scale_notification(struct notifier_block *op,
+		unsigned long val, void *ptr)
+{
+	struct dspbridge_platform_data *pdata =
+					omap_dspbridge_dev->dev.platform_data;
+
+	if (CPUFREQ_POSTCHANGE == val && pdata->dsp_get_opp)
+		pwr_pm_post_scale(PRCM_VDD1, pdata->dsp_get_opp());
+
+	return 0;
+}
+
+static struct notifier_block iva_clk_notifier = {
+	.notifier_call = dspbridge_scale_notification,
+	NULL,
+};
+#endif
+
+/**
+ * omap3_bridge_startup() - perform low lever initializations
+ * @pdev:      pointer to platform device
+ *
+ * Initializes recovery, PM and DVFS required data, before calling
+ * clk and memory init routines.
+ */
+static int omap3_bridge_startup(struct platform_device *pdev)
+{
+	struct dspbridge_platform_data *pdata = pdev->dev.platform_data;
+	struct drv_data *drv_datap = NULL;
+	u32 phys_membase, phys_memsize;
+	int err;
+
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+	bridge_rec_queue = create_workqueue("bridge_rec_queue");
+	INIT_WORK(&bridge_recovery_work, bridge_recover);
+	INIT_COMPLETION(bridge_comp);
+#endif
+
+#ifdef CONFIG_PM
+	/* Initialize the wait queue */
+	bridge_suspend_data.suspended = 0;
+	init_waitqueue_head(&bridge_suspend_data.suspend_wq);
+
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	for (i = 0; i < 6; i++)
+		pdata->mpu_speed[i] = vdd1_rate_table_bridge[i].rate;
+
+	err = cpufreq_register_notifier(&iva_clk_notifier,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (err)
+		pr_err("%s: clk_notifier_register failed for iva2_ck\n",
+								__func__);
+#endif
+#endif
+
+	dsp_clk_init();
+	services_init();
+
+	drv_datap = kzalloc(sizeof(struct drv_data), GFP_KERNEL);
+	if (!drv_datap) {
+		err = -ENOMEM;
+		goto err1;
+	}
+
+	drv_datap->shm_size = shm_size;
+	drv_datap->tc_wordswapon = tc_wordswapon;
+
+	if (base_img) {
+		drv_datap->base_img = kmalloc(strlen(base_img) + 1, GFP_KERNEL);
+		if (!drv_datap->base_img) {
+			err = -ENOMEM;
+			goto err2;
+		}
+		strncpy(drv_datap->base_img, base_img, strlen(base_img) + 1);
+	}
+
+	dev_set_drvdata(bridge, drv_datap);
+
+	if (shm_size < 0x10000) {	/* 64 KB */
+		err = -EINVAL;
+		pr_err("%s: shm size must be at least 64 KB\n", __func__);
+		goto err3;
+	}
+	dev_dbg(bridge, "%s: requested shm_size = 0x%x\n", __func__, shm_size);
+
+	phys_membase = pdata->phys_mempool_base;
+	phys_memsize = pdata->phys_mempool_size;
+	if (phys_membase > 0 && phys_memsize > 0)
+		mem_ext_phys_pool_init(phys_membase, phys_memsize);
+
+	if (tc_wordswapon)
+		dev_dbg(bridge, "%s: TC Word Swap is enabled\n", __func__);
+
+	driver_context = dsp_init(&err);
+	if (err) {
+		pr_err("DSP Bridge driver initialization failed\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	mem_ext_phys_pool_release();
+err3:
+	kfree(drv_datap->base_img);
+err2:
+	kfree(drv_datap);
+err1:
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	cpufreq_unregister_notifier(&iva_clk_notifier,
+					CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+	dsp_clk_exit();
+	services_exit();
+
+	return err;
+}
+
+static int __devinit omap34_xx_bridge_probe(struct platform_device *pdev)
+{
+	int err;
+	dev_t dev = 0;
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	int i = 0;
+#endif
+
+	omap_dspbridge_dev = pdev;
+
+	/* Global bridge device */
+	bridge = &omap_dspbridge_dev->dev;
+
+	/* Bridge low level initializations */
+	err = omap3_bridge_startup(pdev);
+	if (err)
+		goto err1;
+
+	/* use 2.6 device model */
+	err = alloc_chrdev_region(&dev, 0, 1, driver_name);
+	if (err) {
+		pr_err("%s: Can't get major %d\n", __func__, driver_major);
+		goto err1;
+	}
+
+	cdev_init(&bridge_cdev, &bridge_fops);
+	bridge_cdev.owner = THIS_MODULE;
+
+	err = cdev_add(&bridge_cdev, dev, 1);
+	if (err) {
+		pr_err("%s: Failed to add bridge device\n", __func__);
+		goto err2;
+	}
+
+	/* udev support */
+	bridge_class = class_create(THIS_MODULE, "ti_bridge");
+	if (IS_ERR(bridge_class)) {
+		pr_err("%s: Error creating bridge class\n", __func__);
+		goto err3;
+	}
+
+	driver_major = MAJOR(dev);
+	device_create(bridge_class, NULL, MKDEV(driver_major, 0),
+		      NULL, "DspBridge");
+	pr_info("DSP Bridge driver loaded\n");
+
+	return 0;
+
+err3:
+	cdev_del(&bridge_cdev);
+err2:
+	unregister_chrdev_region(dev, 1);
+err1:
+	return err;
+}
+
+static int __devexit omap34_xx_bridge_remove(struct platform_device *pdev)
+{
+	dev_t devno;
+	bool ret;
+	int status = 0;
+	void *hdrv_obj = NULL;
+
+	status = cfg_get_object((u32 *) &hdrv_obj, REG_DRV_OBJECT);
+	if (status)
+		goto func_cont;
+
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
+	if (cpufreq_unregister_notifier(&iva_clk_notifier,
+						CPUFREQ_TRANSITION_NOTIFIER))
+		pr_err("%s: cpufreq_unregister_notifier failed for iva2_ck\n",
+		       __func__);
+#endif /* #ifdef CONFIG_TIDSPBRIDGE_DVFS */
+
+	if (driver_context) {
+		/* Put the DSP in reset state */
+		ret = dsp_deinit(driver_context);
+		driver_context = 0;
+		DBC_ASSERT(ret == true);
+	}
+
+func_cont:
+	mem_ext_phys_pool_release();
+
+	dsp_clk_exit();
+	services_exit();
+
+	devno = MKDEV(driver_major, 0);
+	cdev_del(&bridge_cdev);
+	unregister_chrdev_region(devno, 1);
+	if (bridge_class) {
+		/* remove the device from sysfs */
+		device_destroy(bridge_class, MKDEV(driver_major, 0));
+		class_destroy(bridge_class);
+
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int BRIDGE_SUSPEND(struct platform_device *pdev, pm_message_t state)
+{
+	u32 status;
+	u32 command = PWR_EMERGENCYDEEPSLEEP;
+
+	status = pwr_sleep_dsp(command, time_out);
+	if (status)
+		return -1;
+
+	bridge_suspend_data.suspended = 1;
+	return 0;
+}
+
+static int BRIDGE_RESUME(struct platform_device *pdev)
+{
+	u32 status;
+
+	status = pwr_wake_dsp(time_out);
+	if (status)
+		return -1;
+
+	bridge_suspend_data.suspended = 0;
+	wake_up(&bridge_suspend_data.suspend_wq);
+	return 0;
+}
+#else
+#define BRIDGE_SUSPEND NULL
+#define BRIDGE_RESUME NULL
+#endif
+
+static struct platform_driver bridge_driver = {
+	.driver = {
+		   .name = BRIDGE_NAME,
+		   },
+	.probe = omap34_xx_bridge_probe,
+	.remove = __devexit_p(omap34_xx_bridge_remove),
+	.suspend = BRIDGE_SUSPEND,
+	.resume = BRIDGE_RESUME,
+};
+
+static int __init bridge_init(void)
+{
+	return platform_driver_register(&bridge_driver);
+}
+
+static void __exit bridge_exit(void)
+{
+	platform_driver_unregister(&bridge_driver);
+}
+
+/*
+ * This function is called when an application opens handle to the
+ * bridge driver.
+ */
+static int bridge_open(struct inode *ip, struct file *filp)
+{
+	int status = 0;
+	struct process_context *pr_ctxt = NULL;
+
+	/*
+	 * Allocate a new process context and insert it into global
+	 * process context list.
+	 */
+
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+	if (recover) {
+		if (filp->f_flags & O_NONBLOCK ||
+			wait_for_completion_interruptible(&bridge_open_comp))
+			return -EBUSY;
+	}
+#endif
+	pr_ctxt = kzalloc(sizeof(struct process_context), GFP_KERNEL);
+	if (pr_ctxt) {
+		pr_ctxt->res_state = PROC_RES_ALLOCATED;
+		spin_lock_init(&pr_ctxt->dmm_map_lock);
+		INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
+		spin_lock_init(&pr_ctxt->dmm_rsv_lock);
+		INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
+
+		pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
+		if (pr_ctxt->node_id) {
+			idr_init(pr_ctxt->node_id);
+		} else {
+			status = -ENOMEM;
+			goto err;
+		}
+
+		pr_ctxt->stream_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
+		if (pr_ctxt->stream_id)
+			idr_init(pr_ctxt->stream_id);
+		else
+			status = -ENOMEM;
+	} else {
+		status = -ENOMEM;
+	}
+err:
+	filp->private_data = pr_ctxt;
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+	if (!status)
+		atomic_inc(&bridge_cref);
+#endif
+	return status;
+}
+
+/*
+ * This function is called when an application closes handle to the bridge
+ * driver.
+ */
+static int bridge_release(struct inode *ip, struct file *filp)
+{
+	int status = 0;
+	struct process_context *pr_ctxt;
+
+	if (!filp->private_data) {
+		status = -EIO;
+		goto err;
+	}
+
+	pr_ctxt = filp->private_data;
+	flush_signals(current);
+	drv_remove_all_resources(pr_ctxt);
+	proc_detach(pr_ctxt);
+	kfree(pr_ctxt);
+
+	filp->private_data = NULL;
+
+err:
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+	if (!atomic_dec_return(&bridge_cref))
+		complete(&bridge_comp);
+#endif
+	return status;
+}
+
+/* This function provides IO interface to the bridge driver. */
+static long bridge_ioctl(struct file *filp, unsigned int code,
+			 unsigned long args)
+{
+	int status;
+	u32 retval = 0;
+	union trapped_args buf_in;
+
+	DBC_REQUIRE(filp != NULL);
+#ifdef CONFIG_TIDSPBRIDGE_RECOVERY
+	if (recover) {
+		status = -EIO;
+		goto err;
+	}
+#endif
+#ifdef CONFIG_PM
+	status = omap34_xxbridge_suspend_lockout(&bridge_suspend_data, filp);
+	if (status != 0)
+		return status;
+#endif
+
+	if (!filp->private_data) {
+		status = -EIO;
+		goto err;
+	}
+
+	status = copy_from_user(&buf_in, (union trapped_args *)args,
+				sizeof(union trapped_args));
+
+	if (!status) {
+		status = api_call_dev_ioctl(code, &buf_in, &retval,
+					     filp->private_data);
+
+		if (!status) {
+			status = retval;
+		} else {
+			dev_dbg(bridge, "%s: IOCTL Failed, code: 0x%x "
+				"status 0x%x\n", __func__, code, status);
+			status = -1;
+		}
+
+	}
+
+err:
+	return status;
+}
+
+/* This function maps kernel space memory to user space memory. */
+static int bridge_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	u32 offset = vma->vm_pgoff << PAGE_SHIFT;
+	u32 status;
+
+	DBC_ASSERT(vma->vm_start < vma->vm_end);
+
+	vma->vm_flags |= VM_RESERVED | VM_IO;
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	dev_dbg(bridge, "%s: vm filp %p offset %x start %lx end %lx page_prot "
+		"%lx flags %lx\n", __func__, filp, offset,
+		vma->vm_start, vma->vm_end, vma->vm_page_prot, vma->vm_flags);
+
+	status = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+				 vma->vm_end - vma->vm_start,
+				 vma->vm_page_prot);
+	if (status != 0)
+		status = -EAGAIN;
+
+	return status;
+}
+
+/* To remove all process resources before removing the process from the
+ * process context list */
+int drv_remove_all_resources(void *process_ctxt)
+{
+	int status = 0;
+	struct process_context *ctxt = (struct process_context *)process_ctxt;
+	drv_remove_all_strm_res_elements(ctxt);
+	drv_remove_all_node_res_elements(ctxt);
+	drv_remove_all_dmm_res_elements(ctxt);
+	ctxt->res_state = PROC_RES_FREED;
+	return status;
+}
+
+/* Bridge driver initialization and de-initialization functions */
+module_init(bridge_init);
+module_exit(bridge_exit);
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.h b/drivers/staging/tidspbridge/rmgr/drv_interface.h
new file mode 100644
index 00000000000..ab070602adc
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.h
@@ -0,0 +1,28 @@
+/*
+ * drv_interface.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef	_DRV_INTERFACE_H_
+#define _DRV_INTERFACE_H_
+
+/* Prototypes for all functions in this bridge */
+static int __init bridge_init(void);	/* Initialize bridge */
+static void __exit bridge_exit(void);	/* Opposite of initialize */
+static int bridge_open(struct inode *ip, struct file *filp);	/* Open */
+static int bridge_release(struct inode *ip, struct file *filp);	/* Release */
+static long bridge_ioctl(struct file *filp, unsigned int code,
+				unsigned long args);
+static int bridge_mmap(struct file *filp, struct vm_area_struct *vma);
+#endif /* ifndef _DRV_INTERFACE_H_ */
diff --git a/drivers/staging/tidspbridge/rmgr/dspdrv.c b/drivers/staging/tidspbridge/rmgr/dspdrv.c
new file mode 100644
index 00000000000..714f348f526
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/dspdrv.c
@@ -0,0 +1,142 @@
+/*
+ * dspdrv.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Interface to allocate and free bridge resources.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- Host OS */
+#include <linux/types.h>
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/drv.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/dspapi.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/mgr.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dspdrv.h>
+
+/*
+ *  ======== dsp_init ========
+ *  	Allocates bridge resources. Loads a base image onto DSP, if specified.
+ */
+u32 dsp_init(u32 *init_status)
+{
+	char dev_node[MAXREGPATHLENGTH] = "TIOMAP1510";
+	int status = -EPERM;
+	struct drv_object *drv_obj = NULL;
+	u32 device_node;
+	u32 device_node_string;
+
+	if (!api_init())
+		goto func_cont;
+
+	status = drv_create(&drv_obj);
+	if (status) {
+		api_exit();
+		goto func_cont;
+	}
+
+	/* End drv_create */
+	/* Request Resources */
+	status = drv_request_resources((u32) &dev_node, &device_node_string);
+	if (!status) {
+		/* Attempt to Start the Device */
+		status = dev_start_device((struct cfg_devnode *)
+					  device_node_string);
+		if (status)
+			(void)drv_release_resources
+			    ((u32) device_node_string, drv_obj);
+	} else {
+		dev_dbg(bridge, "%s: drv_request_resources Failed\n", __func__);
+		status = -EPERM;
+	}
+
+	/* Unwind whatever was loaded */
+	if (status) {
+		/* irrespective of the status of dev_remove_device we conitinue
+		 * unloading. Get the Driver Object iterate through and remove.
+		 * Reset the status to E_FAIL to avoid going through
+		 * api_init_complete2. */
+		for (device_node = drv_get_first_dev_extension();
+		     device_node != 0;
+		     device_node = drv_get_next_dev_extension(device_node)) {
+			(void)dev_remove_device((struct cfg_devnode *)
+						device_node);
+			(void)drv_release_resources((u32) device_node, drv_obj);
+		}
+		/* Remove the Driver Object */
+		(void)drv_destroy(drv_obj);
+		drv_obj = NULL;
+		api_exit();
+		dev_dbg(bridge, "%s: Logical device failed init\n", __func__);
+	}			/* Unwinding the loaded drivers */
+func_cont:
+	/* Attempt to Start the Board */
+	if (!status) {
+		/* BRD_AutoStart could fail if the dsp execuetable is not the
+		 * correct one. We should not propagate that error
+		 * into the device loader. */
+		(void)api_init_complete2();
+	} else {
+		dev_dbg(bridge, "%s: Failed\n", __func__);
+	}			/* End api_init_complete2 */
+	DBC_ENSURE((!status && drv_obj != NULL) ||
+		   (status && drv_obj == NULL));
+	*init_status = status;
+	/* Return the Driver Object */
+	return (u32) drv_obj;
+}
+
+/*
+ *  ======== dsp_deinit ========
+ *  	Frees the resources allocated for bridge.
+ */
+bool dsp_deinit(u32 device_context)
+{
+	bool ret = true;
+	u32 device_node;
+	struct mgr_object *mgr_obj = NULL;
+
+	while ((device_node = drv_get_first_dev_extension()) != 0) {
+		(void)dev_remove_device((struct cfg_devnode *)device_node);
+
+		(void)drv_release_resources((u32) device_node,
+					(struct drv_object *)device_context);
+	}
+
+	(void)drv_destroy((struct drv_object *)device_context);
+
+	/* Get the Manager Object from Registry
+	 * MGR Destroy will unload the DCD dll */
+	if (!cfg_get_object((u32 *) &mgr_obj, REG_MGR_OBJECT))
+		(void)mgr_destroy(mgr_obj);
+
+	api_exit();
+
+	return ret;
+}
diff --git a/drivers/staging/tidspbridge/rmgr/mgr.c b/drivers/staging/tidspbridge/rmgr/mgr.c
new file mode 100644
index 00000000000..57a39b9c274
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/mgr.c
@@ -0,0 +1,375 @@
+/*
+ * mgr.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implementation of Manager interface to the device object at the
+ * driver level. This queries the NDB data base and retrieves the
+ * data about Node and Processor.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/dbdcd.h>
+#include <dspbridge/drv.h>
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/mgr.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define ZLDLLNAME               ""
+
+struct mgr_object {
+	struct dcd_manager *hdcd_mgr;	/* Proc/Node data manager */
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;
+
+/*
+ *  ========= mgr_create =========
+ *  Purpose:
+ *      MGR Object gets created only once during driver Loading.
+ */
+int mgr_create(struct mgr_object **mgr_obj,
+		      struct cfg_devnode *dev_node_obj)
+{
+	int status = 0;
+	struct mgr_object *pmgr_obj = NULL;
+
+	DBC_REQUIRE(mgr_obj != NULL);
+	DBC_REQUIRE(refs > 0);
+
+	pmgr_obj = kzalloc(sizeof(struct mgr_object), GFP_KERNEL);
+	if (pmgr_obj) {
+		status = dcd_create_manager(ZLDLLNAME, &pmgr_obj->hdcd_mgr);
+		if (!status) {
+			/* If succeeded store the handle in the MGR Object */
+			status = cfg_set_object((u32) pmgr_obj, REG_MGR_OBJECT);
+			if (!status) {
+				*mgr_obj = pmgr_obj;
+			} else {
+				dcd_destroy_manager(pmgr_obj->hdcd_mgr);
+				kfree(pmgr_obj);
+			}
+		} else {
+			/* failed to Create DCD Manager */
+			kfree(pmgr_obj);
+		}
+	} else {
+		status = -ENOMEM;
+	}
+
+	DBC_ENSURE(status || pmgr_obj);
+	return status;
+}
+
+/*
+ *  ========= mgr_destroy =========
+ *     This function is invoked during bridge driver unloading.Frees MGR object.
+ */
+int mgr_destroy(struct mgr_object *hmgr_obj)
+{
+	int status = 0;
+	struct mgr_object *pmgr_obj = (struct mgr_object *)hmgr_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hmgr_obj);
+
+	/* Free resources */
+	if (hmgr_obj->hdcd_mgr)
+		dcd_destroy_manager(hmgr_obj->hdcd_mgr);
+
+	kfree(pmgr_obj);
+	/* Update the Registry with NULL for MGR Object */
+	(void)cfg_set_object(0, REG_MGR_OBJECT);
+
+	return status;
+}
+
+/*
+ *  ======== mgr_enum_node_info ========
+ *      Enumerate and get configuration information about nodes configured
+ *      in the node database.
+ */
+int mgr_enum_node_info(u32 node_id, struct dsp_ndbprops *pndb_props,
+			      u32 undb_props_size, u32 *pu_num_nodes)
+{
+	int status = 0;
+	struct dsp_uuid node_uuid, temp_uuid;
+	u32 temp_index = 0;
+	u32 node_index = 0;
+	struct dcd_genericobj gen_obj;
+	struct mgr_object *pmgr_obj = NULL;
+
+	DBC_REQUIRE(pndb_props != NULL);
+	DBC_REQUIRE(pu_num_nodes != NULL);
+	DBC_REQUIRE(undb_props_size >= sizeof(struct dsp_ndbprops));
+	DBC_REQUIRE(refs > 0);
+
+	*pu_num_nodes = 0;
+	/* Get The Manager Object from the Registry */
+	status = cfg_get_object((u32 *) &pmgr_obj, REG_MGR_OBJECT);
+	if (status)
+		goto func_cont;
+
+	DBC_ASSERT(pmgr_obj);
+	/* Forever loop till we hit failed or no more items in the
+	 * Enumeration. We will exit the loop other than 0; */
+	while (status == 0) {
+		status = dcd_enumerate_object(temp_index++, DSP_DCDNODETYPE,
+					      &temp_uuid);
+		if (status == 0) {
+			node_index++;
+			if (node_id == (node_index - 1))
+				node_uuid = temp_uuid;
+
+		}
+	}
+	if (!status) {
+		if (node_id > (node_index - 1)) {
+			status = -EINVAL;
+		} else {
+			status = dcd_get_object_def(pmgr_obj->hdcd_mgr,
+						    (struct dsp_uuid *)
+						    &node_uuid, DSP_DCDNODETYPE,
+						    &gen_obj);
+			if (!status) {
+				/* Get the Obj def */
+				*pndb_props =
+				    gen_obj.obj_data.node_obj.ndb_props;
+				*pu_num_nodes = node_index;
+			}
+		}
+	}
+
+func_cont:
+	DBC_ENSURE((!status && *pu_num_nodes > 0) ||
+		   (status && *pu_num_nodes == 0));
+
+	return status;
+}
+
+/*
+ *  ======== mgr_enum_processor_info ========
+ *      Enumerate and get configuration information about available
+ *      DSP processors.
+ */
+int mgr_enum_processor_info(u32 processor_id,
+				   struct dsp_processorinfo *
+				   processor_info, u32 processor_info_size,
+				   u8 *pu_num_procs)
+{
+	int status = 0;
+	int status1 = 0;
+	int status2 = 0;
+	struct dsp_uuid temp_uuid;
+	u32 temp_index = 0;
+	u32 proc_index = 0;
+	struct dcd_genericobj gen_obj;
+	struct mgr_object *pmgr_obj = NULL;
+	struct mgr_processorextinfo *ext_info;
+	struct dev_object *hdev_obj;
+	struct drv_object *hdrv_obj;
+	u8 dev_type;
+	struct cfg_devnode *dev_node;
+	bool proc_detect = false;
+
+	DBC_REQUIRE(processor_info != NULL);
+	DBC_REQUIRE(pu_num_procs != NULL);
+	DBC_REQUIRE(processor_info_size >= sizeof(struct dsp_processorinfo));
+	DBC_REQUIRE(refs > 0);
+
+	*pu_num_procs = 0;
+	status = cfg_get_object((u32 *) &hdrv_obj, REG_DRV_OBJECT);
+	if (!status) {
+		status = drv_get_dev_object(processor_id, hdrv_obj, &hdev_obj);
+		if (!status) {
+			status = dev_get_dev_type(hdev_obj, (u8 *) &dev_type);
+			status = dev_get_dev_node(hdev_obj, &dev_node);
+			if (dev_type != DSP_UNIT)
+				status = -EPERM;
+
+			if (!status)
+				processor_info->processor_type = DSPTYPE64;
+		}
+	}
+	if (status)
+		goto func_end;
+
+	/* Get The Manager Object from the Registry */
+	if (cfg_get_object((u32 *) &pmgr_obj, REG_MGR_OBJECT)) {
+		dev_dbg(bridge, "%s: Failed to get MGR Object\n", __func__);
+		goto func_end;
+	}
+	DBC_ASSERT(pmgr_obj);
+	/* Forever loop till we hit no more items in the
+	 * Enumeration. We will exit the loop other than 0; */
+	while (status1 == 0) {
+		status1 = dcd_enumerate_object(temp_index++,
+					       DSP_DCDPROCESSORTYPE,
+					       &temp_uuid);
+		if (status1 != 0)
+			break;
+
+		proc_index++;
+		/* Get the Object properties to find the Device/Processor
+		 * Type */
+		if (proc_detect != false)
+			continue;
+
+		status2 = dcd_get_object_def(pmgr_obj->hdcd_mgr,
+					     (struct dsp_uuid *)&temp_uuid,
+					     DSP_DCDPROCESSORTYPE, &gen_obj);
+		if (!status2) {
+			/* Get the Obj def */
+			if (processor_info_size <
+			    sizeof(struct mgr_processorextinfo)) {
+				*processor_info = gen_obj.obj_data.proc_info;
+			} else {
+				/* extended info */
+				ext_info = (struct mgr_processorextinfo *)
+				    processor_info;
+				*ext_info = gen_obj.obj_data.ext_proc_obj;
+			}
+			dev_dbg(bridge, "%s: Got proctype  from DCD %x\n",
+				__func__, processor_info->processor_type);
+			/* See if we got the needed processor */
+			if (dev_type == DSP_UNIT) {
+				if (processor_info->processor_type ==
+				    DSPPROCTYPE_C64)
+					proc_detect = true;
+			} else if (dev_type == IVA_UNIT) {
+				if (processor_info->processor_type ==
+				    IVAPROCTYPE_ARM7)
+					proc_detect = true;
+			}
+			/* User applciatiuons aonly check for chip type, so
+			 * this clumsy overwrite */
+			processor_info->processor_type = DSPTYPE64;
+		} else {
+			dev_dbg(bridge, "%s: Failed to get DCD processor info "
+				"%x\n", __func__, status2);
+			status = -EPERM;
+		}
+	}
+	*pu_num_procs = proc_index;
+	if (proc_detect == false) {
+		dev_dbg(bridge, "%s: Failed to get proc info from DCD, so use "
+			"CFG registry\n", __func__);
+		processor_info->processor_type = DSPTYPE64;
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== mgr_exit ========
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ */
+void mgr_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+	refs--;
+	if (refs == 0)
+		dcd_exit();
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== mgr_get_dcd_handle ========
+ *      Retrieves the MGR handle. Accessor Function.
+ */
+int mgr_get_dcd_handle(struct mgr_object *mgr_handle,
+			      u32 *dcd_handle)
+{
+	int status = -EPERM;
+	struct mgr_object *pmgr_obj = (struct mgr_object *)mgr_handle;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dcd_handle != NULL);
+
+	*dcd_handle = (u32) NULL;
+	if (pmgr_obj) {
+		*dcd_handle = (u32) pmgr_obj->hdcd_mgr;
+		status = 0;
+	}
+	DBC_ENSURE((!status && *dcd_handle != (u32) NULL) ||
+		   (status && *dcd_handle == (u32) NULL));
+
+	return status;
+}
+
+/*
+ *  ======== mgr_init ========
+ *      Initialize MGR's private state, keeping a reference count on each call.
+ */
+bool mgr_init(void)
+{
+	bool ret = true;
+	bool init_dcd = false;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (refs == 0) {
+		init_dcd = dcd_init();	/*  DCD Module */
+
+		if (!init_dcd)
+			ret = false;
+	}
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== mgr_wait_for_bridge_events ========
+ *      Block on any Bridge event(s)
+ */
+int mgr_wait_for_bridge_events(struct dsp_notification **anotifications,
+				      u32 count, u32 *pu_index,
+				      u32 utimeout)
+{
+	int status;
+	struct sync_object *sync_events[MAX_EVENTS];
+	u32 i;
+
+	DBC_REQUIRE(count < MAX_EVENTS);
+
+	for (i = 0; i < count; i++)
+		sync_events[i] = anotifications[i]->handle;
+
+	status = sync_wait_on_multiple_events(sync_events, count, utimeout,
+					      pu_index);
+
+	return status;
+
+}
diff --git a/drivers/staging/tidspbridge/rmgr/nldr.c b/drivers/staging/tidspbridge/rmgr/nldr.c
new file mode 100644
index 00000000000..d8f4eebf742
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/nldr.c
@@ -0,0 +1,1974 @@
+/*
+ * nldr.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge dynamic + overlay Node loader.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+#include <dspbridge/host_os.h>
+
+#include <dspbridge/dbdefs.h>
+
+#include <dspbridge/dbc.h>
+
+/* Platform manager */
+#include <dspbridge/cod.h>
+#include <dspbridge/dev.h>
+
+/* Resource manager */
+#include <dspbridge/dbll.h>
+#include <dspbridge/dbdcd.h>
+#include <dspbridge/rmm.h>
+#include <dspbridge/uuidutil.h>
+
+#include <dspbridge/nldr.h>
+#include <linux/gcd.h>
+
+/* Name of section containing dynamic load mem */
+#define DYNMEMSECT  ".dspbridge_mem"
+
+/* Name of section containing dependent library information */
+#define DEPLIBSECT  ".dspbridge_deplibs"
+
+/* Max depth of recursion for loading node's dependent libraries */
+#define MAXDEPTH	    5
+
+/* Max number of persistent libraries kept by a node */
+#define MAXLIBS	 5
+
+/*
+ *  Defines for extracting packed dynamic load memory requirements from two
+ *  masks.
+ *  These defines must match node.cdb and dynm.cdb
+ *  Format of data/code mask is:
+ *   uuuuuuuu|fueeeeee|fudddddd|fucccccc|
+ *  where
+ *      u = unused
+ *      cccccc = prefered/required dynamic mem segid for create phase data/code
+ *      dddddd = prefered/required dynamic mem segid for delete phase data/code
+ *      eeeeee = prefered/req. dynamic mem segid for execute phase data/code
+ *      f = flag indicating if memory is preferred or required:
+ *	  f = 1 if required, f = 0 if preferred.
+ *
+ *  The 6 bits of the segid are interpreted as follows:
+ *
+ *  If the 6th bit (bit 5) is not set, then this specifies a memory segment
+ *  between 0 and 31 (a maximum of 32 dynamic loading memory segments).
+ *  If the 6th bit (bit 5) is set, segid has the following interpretation:
+ *      segid = 32 - Any internal memory segment can be used.
+ *      segid = 33 - Any external memory segment can be used.
+ *      segid = 63 - Any memory segment can be used (in this case the
+ *		   required/preferred flag is irrelevant).
+ *
+ */
+/* Maximum allowed dynamic loading memory segments */
+#define MAXMEMSEGS      32
+
+#define MAXSEGID	3	/* Largest possible (real) segid */
+#define MEMINTERNALID   32	/* Segid meaning use internal mem */
+#define MEMEXTERNALID   33	/* Segid meaning use external mem */
+#define NULLID	  63		/* Segid meaning no memory req/pref */
+#define FLAGBIT	 7		/* 7th bit is pref./req. flag */
+#define SEGMASK	 0x3f		/* Bits 0 - 5 */
+
+#define CREATEBIT	0	/* Create segid starts at bit 0 */
+#define DELETEBIT	8	/* Delete segid starts at bit 8 */
+#define EXECUTEBIT      16	/* Execute segid starts at bit 16 */
+
+/*
+ *  Masks that define memory type.  Must match defines in dynm.cdb.
+ */
+#define DYNM_CODE	0x2
+#define DYNM_DATA	0x4
+#define DYNM_CODEDATA   (DYNM_CODE | DYNM_DATA)
+#define DYNM_INTERNAL   0x8
+#define DYNM_EXTERNAL   0x10
+
+/*
+ *  Defines for packing memory requirement/preference flags for code and
+ *  data of each of the node's phases into one mask.
+ *  The bit is set if the segid is required for loading code/data of the
+ *  given phase. The bit is not set, if the segid is preferred only.
+ *
+ *  These defines are also used as indeces into a segid array for the node.
+ *  eg node's segid[CREATEDATAFLAGBIT] is the memory segment id that the
+ *  create phase data is required or preferred to be loaded into.
+ */
+#define CREATEDATAFLAGBIT   0
+#define CREATECODEFLAGBIT   1
+#define EXECUTEDATAFLAGBIT  2
+#define EXECUTECODEFLAGBIT  3
+#define DELETEDATAFLAGBIT   4
+#define DELETECODEFLAGBIT   5
+#define MAXFLAGS	    6
+
+    /*
+     *  These names may be embedded in overlay sections to identify which
+     *  node phase the section should be overlayed.
+ */
+#define PCREATE	 "create"
+#define PDELETE	 "delete"
+#define PEXECUTE	"execute"
+
+static inline bool is_equal_uuid(struct dsp_uuid *uuid1,
+							struct dsp_uuid *uuid2)
+{
+	return !memcmp(uuid1, uuid2, sizeof(struct dsp_uuid));
+}
+
+    /*
+     *  ======== mem_seg_info ========
+     *  Format of dynamic loading memory segment info in coff file.
+     *  Must match dynm.h55.
+ */
+struct mem_seg_info {
+	u32 segid;		/* Dynamic loading memory segment number */
+	u32 base;
+	u32 len;
+	u32 type;		/* Mask of DYNM_CODE, DYNM_INTERNAL, etc. */
+};
+
+/*
+ *  ======== lib_node ========
+ *  For maintaining a tree of library dependencies.
+ */
+struct lib_node {
+	struct dbll_library_obj *lib;	/* The library */
+	u16 dep_libs;		/* Number of dependent libraries */
+	struct lib_node *dep_libs_tree;	/* Dependent libraries of lib */
+};
+
+/*
+ *  ======== ovly_sect ========
+ *  Information needed to overlay a section.
+ */
+struct ovly_sect {
+	struct ovly_sect *next_sect;
+	u32 sect_load_addr;	/* Load address of section */
+	u32 sect_run_addr;	/* Run address of section */
+	u32 size;		/* Size of section */
+	u16 page;		/* DBL_CODE, DBL_DATA */
+};
+
+/*
+ *  ======== ovly_node ========
+ *  For maintaining a list of overlay nodes, with sections that need to be
+ *  overlayed for each of the nodes phases.
+ */
+struct ovly_node {
+	struct dsp_uuid uuid;
+	char *node_name;
+	struct ovly_sect *create_sects_list;
+	struct ovly_sect *delete_sects_list;
+	struct ovly_sect *execute_sects_list;
+	struct ovly_sect *other_sects_list;
+	u16 create_sects;
+	u16 delete_sects;
+	u16 execute_sects;
+	u16 other_sects;
+	u16 create_ref;
+	u16 delete_ref;
+	u16 execute_ref;
+	u16 other_ref;
+};
+
+/*
+ *  ======== nldr_object ========
+ *  Overlay loader object.
+ */
+struct nldr_object {
+	struct dev_object *hdev_obj;	/* Device object */
+	struct dcd_manager *hdcd_mgr;	/* Proc/Node data manager */
+	struct dbll_tar_obj *dbll;	/* The DBL loader */
+	struct dbll_library_obj *base_lib;	/* Base image library */
+	struct rmm_target_obj *rmm;	/* Remote memory manager for DSP */
+	struct dbll_fxns ldr_fxns;	/* Loader function table */
+	struct dbll_attrs ldr_attrs;	/* attrs to pass to loader functions */
+	nldr_ovlyfxn ovly_fxn;	/* "write" for overlay nodes */
+	nldr_writefxn write_fxn;	/* "write" for dynamic nodes */
+	struct ovly_node *ovly_table;	/* Table of overlay nodes */
+	u16 ovly_nodes;		/* Number of overlay nodes in base */
+	u16 ovly_nid;		/* Index for tracking overlay nodes */
+	u16 dload_segs;		/* Number of dynamic load mem segs */
+	u32 *seg_table;		/* memtypes of dynamic memory segs
+				 * indexed by segid
+				 */
+	u16 us_dsp_mau_size;	/* Size of DSP MAU */
+	u16 us_dsp_word_size;	/* Size of DSP word */
+};
+
+/*
+ *  ======== nldr_nodeobject ========
+ *  Dynamic node object. This object is created when a node is allocated.
+ */
+struct nldr_nodeobject {
+	struct nldr_object *nldr_obj;	/* Dynamic loader handle */
+	void *priv_ref;		/* Handle to pass to dbl_write_fxn */
+	struct dsp_uuid uuid;	/* Node's UUID */
+	bool dynamic;		/* Dynamically loaded node? */
+	bool overlay;		/* Overlay node? */
+	bool *pf_phase_split;	/* Multiple phase libraries? */
+	struct lib_node root;	/* Library containing node phase */
+	struct lib_node create_lib;	/* Library with create phase lib */
+	struct lib_node execute_lib;	/* Library with execute phase lib */
+	struct lib_node delete_lib;	/* Library with delete phase lib */
+	/* libs remain loaded until Delete */
+	struct lib_node pers_lib_table[MAXLIBS];
+	s32 pers_libs;		/* Number of persistent libraries */
+	/* Path in lib dependency tree */
+	struct dbll_library_obj *lib_path[MAXDEPTH + 1];
+	enum nldr_phase phase;	/* Node phase currently being loaded */
+
+	/*
+	 *  Dynamic loading memory segments for data and code of each phase.
+	 */
+	u16 seg_id[MAXFLAGS];
+
+	/*
+	 *  Mask indicating whether each mem segment specified in seg_id[]
+	 *  is preferred or required.
+	 *  For example
+	 *  	if (code_data_flag_mask & (1 << EXECUTEDATAFLAGBIT)) != 0,
+	 *  then it is required to load execute phase data into the memory
+	 *  specified by seg_id[EXECUTEDATAFLAGBIT].
+	 */
+	u32 code_data_flag_mask;
+};
+
+/* Dynamic loader function table */
+static struct dbll_fxns ldr_fxns = {
+	(dbll_close_fxn) dbll_close,
+	(dbll_create_fxn) dbll_create,
+	(dbll_delete_fxn) dbll_delete,
+	(dbll_exit_fxn) dbll_exit,
+	(dbll_get_attrs_fxn) dbll_get_attrs,
+	(dbll_get_addr_fxn) dbll_get_addr,
+	(dbll_get_c_addr_fxn) dbll_get_c_addr,
+	(dbll_get_sect_fxn) dbll_get_sect,
+	(dbll_init_fxn) dbll_init,
+	(dbll_load_fxn) dbll_load,
+	(dbll_load_sect_fxn) dbll_load_sect,
+	(dbll_open_fxn) dbll_open,
+	(dbll_read_sect_fxn) dbll_read_sect,
+	(dbll_set_attrs_fxn) dbll_set_attrs,
+	(dbll_unload_fxn) dbll_unload,
+	(dbll_unload_sect_fxn) dbll_unload_sect,
+};
+
+static u32 refs;		/* module reference count */
+
+static int add_ovly_info(void *handle, struct dbll_sect_info *sect_info,
+				u32 addr, u32 bytes);
+static int add_ovly_node(struct dsp_uuid *uuid_obj,
+				enum dsp_dcdobjtype obj_type, void *handle);
+static int add_ovly_sect(struct nldr_object *nldr_obj,
+				struct ovly_sect **lst,
+				struct dbll_sect_info *sect_inf,
+				bool *exists, u32 addr, u32 bytes);
+static s32 fake_ovly_write(void *handle, u32 dsp_address, void *buf, u32 bytes,
+			   s32 mtype);
+static void free_sects(struct nldr_object *nldr_obj,
+		       struct ovly_sect *phase_sects, u16 alloc_num);
+static bool get_symbol_value(void *handle, void *parg, void *rmm_handle,
+			     char *sym_name, struct dbll_sym_val **sym);
+static int load_lib(struct nldr_nodeobject *nldr_node_obj,
+			   struct lib_node *root, struct dsp_uuid uuid,
+			   bool root_prstnt,
+			   struct dbll_library_obj **lib_path,
+			   enum nldr_phase phase, u16 depth);
+static int load_ovly(struct nldr_nodeobject *nldr_node_obj,
+			    enum nldr_phase phase);
+static int remote_alloc(void **ref, u16 mem_sect, u32 size,
+			       u32 align, u32 *dsp_address,
+			       s32 segmnt_id,
+			       s32 req, bool reserve);
+static int remote_free(void **ref, u16 space, u32 dsp_address, u32 size,
+			      bool reserve);
+
+static void unload_lib(struct nldr_nodeobject *nldr_node_obj,
+		       struct lib_node *root);
+static void unload_ovly(struct nldr_nodeobject *nldr_node_obj,
+			enum nldr_phase phase);
+static bool find_in_persistent_lib_array(struct nldr_nodeobject *nldr_node_obj,
+					 struct dbll_library_obj *lib);
+static u32 find_lcm(u32 a, u32 b);
+
+/*
+ *  ======== nldr_allocate ========
+ */
+int nldr_allocate(struct nldr_object *nldr_obj, void *priv_ref,
+			 const struct dcd_nodeprops *node_props,
+			 struct nldr_nodeobject **nldr_nodeobj,
+			 bool *pf_phase_split)
+{
+	struct nldr_nodeobject *nldr_node_obj = NULL;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(node_props != NULL);
+	DBC_REQUIRE(nldr_nodeobj != NULL);
+	DBC_REQUIRE(nldr_obj);
+
+	/* Initialize handle in case of failure */
+	*nldr_nodeobj = NULL;
+	/* Allocate node object */
+	nldr_node_obj = kzalloc(sizeof(struct nldr_nodeobject), GFP_KERNEL);
+
+	if (nldr_node_obj == NULL) {
+		status = -ENOMEM;
+	} else {
+		nldr_node_obj->pf_phase_split = pf_phase_split;
+		nldr_node_obj->pers_libs = 0;
+		nldr_node_obj->nldr_obj = nldr_obj;
+		nldr_node_obj->priv_ref = priv_ref;
+		/* Save node's UUID. */
+		nldr_node_obj->uuid = node_props->ndb_props.ui_node_id;
+		/*
+		 *  Determine if node is a dynamically loaded node from
+		 *  ndb_props.
+		 */
+		if (node_props->us_load_type == NLDR_DYNAMICLOAD) {
+			/* Dynamic node */
+			nldr_node_obj->dynamic = true;
+			/*
+			 *  Extract memory requirements from ndb_props masks
+			 */
+			/* Create phase */
+			nldr_node_obj->seg_id[CREATEDATAFLAGBIT] = (u16)
+			    (node_props->ul_data_mem_seg_mask >> CREATEBIT) &
+			    SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_data_mem_seg_mask >>
+			      (CREATEBIT + FLAGBIT)) & 1) << CREATEDATAFLAGBIT;
+			nldr_node_obj->seg_id[CREATECODEFLAGBIT] = (u16)
+			    (node_props->ul_code_mem_seg_mask >>
+			     CREATEBIT) & SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_code_mem_seg_mask >>
+			      (CREATEBIT + FLAGBIT)) & 1) << CREATECODEFLAGBIT;
+			/* Execute phase */
+			nldr_node_obj->seg_id[EXECUTEDATAFLAGBIT] = (u16)
+			    (node_props->ul_data_mem_seg_mask >>
+			     EXECUTEBIT) & SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_data_mem_seg_mask >>
+			      (EXECUTEBIT + FLAGBIT)) & 1) <<
+			    EXECUTEDATAFLAGBIT;
+			nldr_node_obj->seg_id[EXECUTECODEFLAGBIT] = (u16)
+			    (node_props->ul_code_mem_seg_mask >>
+			     EXECUTEBIT) & SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_code_mem_seg_mask >>
+			      (EXECUTEBIT + FLAGBIT)) & 1) <<
+			    EXECUTECODEFLAGBIT;
+			/* Delete phase */
+			nldr_node_obj->seg_id[DELETEDATAFLAGBIT] = (u16)
+			    (node_props->ul_data_mem_seg_mask >> DELETEBIT) &
+			    SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_data_mem_seg_mask >>
+			      (DELETEBIT + FLAGBIT)) & 1) << DELETEDATAFLAGBIT;
+			nldr_node_obj->seg_id[DELETECODEFLAGBIT] = (u16)
+			    (node_props->ul_code_mem_seg_mask >>
+			     DELETEBIT) & SEGMASK;
+			nldr_node_obj->code_data_flag_mask |=
+			    ((node_props->ul_code_mem_seg_mask >>
+			      (DELETEBIT + FLAGBIT)) & 1) << DELETECODEFLAGBIT;
+		} else {
+			/* Non-dynamically loaded nodes are part of the
+			 * base image */
+			nldr_node_obj->root.lib = nldr_obj->base_lib;
+			/* Check for overlay node */
+			if (node_props->us_load_type == NLDR_OVLYLOAD)
+				nldr_node_obj->overlay = true;
+
+		}
+		*nldr_nodeobj = (struct nldr_nodeobject *)nldr_node_obj;
+	}
+	/* Cleanup on failure */
+	if (status && nldr_node_obj)
+		kfree(nldr_node_obj);
+
+	DBC_ENSURE((!status && *nldr_nodeobj)
+		   || (status && *nldr_nodeobj == NULL));
+	return status;
+}
+
+/*
+ *  ======== nldr_create ========
+ */
+int nldr_create(struct nldr_object **nldr,
+		       struct dev_object *hdev_obj,
+		       const struct nldr_attrs *pattrs)
+{
+	struct cod_manager *cod_mgr;	/* COD manager */
+	char *psz_coff_buf = NULL;
+	char sz_zl_file[COD_MAXPATHLENGTH];
+	struct nldr_object *nldr_obj = NULL;
+	struct dbll_attrs save_attrs;
+	struct dbll_attrs new_attrs;
+	dbll_flags flags;
+	u32 ul_entry;
+	u16 dload_segs = 0;
+	struct mem_seg_info *mem_info_obj;
+	u32 ul_len = 0;
+	u32 ul_addr;
+	struct rmm_segment *rmm_segs = NULL;
+	u16 i;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(nldr != NULL);
+	DBC_REQUIRE(hdev_obj != NULL);
+	DBC_REQUIRE(pattrs != NULL);
+	DBC_REQUIRE(pattrs->pfn_ovly != NULL);
+	DBC_REQUIRE(pattrs->pfn_write != NULL);
+
+	/* Allocate dynamic loader object */
+	nldr_obj = kzalloc(sizeof(struct nldr_object), GFP_KERNEL);
+	if (nldr_obj) {
+		nldr_obj->hdev_obj = hdev_obj;
+		/* warning, lazy status checking alert! */
+		dev_get_cod_mgr(hdev_obj, &cod_mgr);
+		if (cod_mgr) {
+			status = cod_get_loader(cod_mgr, &nldr_obj->dbll);
+			DBC_ASSERT(!status);
+			status = cod_get_base_lib(cod_mgr, &nldr_obj->base_lib);
+			DBC_ASSERT(!status);
+			status =
+			    cod_get_base_name(cod_mgr, sz_zl_file,
+							COD_MAXPATHLENGTH);
+			DBC_ASSERT(!status);
+		}
+		status = 0;
+		/* end lazy status checking */
+		nldr_obj->us_dsp_mau_size = pattrs->us_dsp_mau_size;
+		nldr_obj->us_dsp_word_size = pattrs->us_dsp_word_size;
+		nldr_obj->ldr_fxns = ldr_fxns;
+		if (!(nldr_obj->ldr_fxns.init_fxn()))
+			status = -ENOMEM;
+
+	} else {
+		status = -ENOMEM;
+	}
+	/* Create the DCD Manager */
+	if (!status)
+		status = dcd_create_manager(NULL, &nldr_obj->hdcd_mgr);
+
+	/* Get dynamic loading memory sections from base lib */
+	if (!status) {
+		status =
+		    nldr_obj->ldr_fxns.get_sect_fxn(nldr_obj->base_lib,
+						    DYNMEMSECT, &ul_addr,
+						    &ul_len);
+		if (!status) {
+			psz_coff_buf =
+				kzalloc(ul_len * nldr_obj->us_dsp_mau_size,
+								GFP_KERNEL);
+			if (!psz_coff_buf)
+				status = -ENOMEM;
+		} else {
+			/* Ok to not have dynamic loading memory */
+			status = 0;
+			ul_len = 0;
+			dev_dbg(bridge, "%s: failed - no dynamic loading mem "
+				"segments: 0x%x\n", __func__, status);
+		}
+	}
+	if (!status && ul_len > 0) {
+		/* Read section containing dynamic load mem segments */
+		status =
+		    nldr_obj->ldr_fxns.read_sect_fxn(nldr_obj->base_lib,
+						     DYNMEMSECT, psz_coff_buf,
+						     ul_len);
+	}
+	if (!status && ul_len > 0) {
+		/* Parse memory segment data */
+		dload_segs = (u16) (*((u32 *) psz_coff_buf));
+		if (dload_segs > MAXMEMSEGS)
+			status = -EBADF;
+	}
+	/* Parse dynamic load memory segments */
+	if (!status && dload_segs > 0) {
+		rmm_segs = kzalloc(sizeof(struct rmm_segment) * dload_segs,
+								GFP_KERNEL);
+		nldr_obj->seg_table =
+				kzalloc(sizeof(u32) * dload_segs, GFP_KERNEL);
+		if (rmm_segs == NULL || nldr_obj->seg_table == NULL) {
+			status = -ENOMEM;
+		} else {
+			nldr_obj->dload_segs = dload_segs;
+			mem_info_obj = (struct mem_seg_info *)(psz_coff_buf +
+							       sizeof(u32));
+			for (i = 0; i < dload_segs; i++) {
+				rmm_segs[i].base = (mem_info_obj + i)->base;
+				rmm_segs[i].length = (mem_info_obj + i)->len;
+				rmm_segs[i].space = 0;
+				nldr_obj->seg_table[i] =
+				    (mem_info_obj + i)->type;
+				dev_dbg(bridge,
+					"(proc) DLL MEMSEGMENT: %d, "
+					"Base: 0x%x, Length: 0x%x\n", i,
+					rmm_segs[i].base, rmm_segs[i].length);
+			}
+		}
+	}
+	/* Create Remote memory manager */
+	if (!status)
+		status = rmm_create(&nldr_obj->rmm, rmm_segs, dload_segs);
+
+	if (!status) {
+		/* set the alloc, free, write functions for loader */
+		nldr_obj->ldr_fxns.get_attrs_fxn(nldr_obj->dbll, &save_attrs);
+		new_attrs = save_attrs;
+		new_attrs.alloc = (dbll_alloc_fxn) remote_alloc;
+		new_attrs.free = (dbll_free_fxn) remote_free;
+		new_attrs.sym_lookup = (dbll_sym_lookup) get_symbol_value;
+		new_attrs.sym_handle = nldr_obj;
+		new_attrs.write = (dbll_write_fxn) pattrs->pfn_write;
+		nldr_obj->ovly_fxn = pattrs->pfn_ovly;
+		nldr_obj->write_fxn = pattrs->pfn_write;
+		nldr_obj->ldr_attrs = new_attrs;
+	}
+	kfree(rmm_segs);
+
+	kfree(psz_coff_buf);
+
+	/* Get overlay nodes */
+	if (!status) {
+		status =
+		    cod_get_base_name(cod_mgr, sz_zl_file, COD_MAXPATHLENGTH);
+		/* lazy check */
+		DBC_ASSERT(!status);
+		/* First count number of overlay nodes */
+		status =
+		    dcd_get_objects(nldr_obj->hdcd_mgr, sz_zl_file,
+				    add_ovly_node, (void *)nldr_obj);
+		/* Now build table of overlay nodes */
+		if (!status && nldr_obj->ovly_nodes > 0) {
+			/* Allocate table for overlay nodes */
+			nldr_obj->ovly_table =
+					kzalloc(sizeof(struct ovly_node) *
+					nldr_obj->ovly_nodes, GFP_KERNEL);
+			/* Put overlay nodes in the table */
+			nldr_obj->ovly_nid = 0;
+			status = dcd_get_objects(nldr_obj->hdcd_mgr, sz_zl_file,
+						 add_ovly_node,
+						 (void *)nldr_obj);
+		}
+	}
+	/* Do a fake reload of the base image to get overlay section info */
+	if (!status && nldr_obj->ovly_nodes > 0) {
+		save_attrs.write = fake_ovly_write;
+		save_attrs.log_write = add_ovly_info;
+		save_attrs.log_write_handle = nldr_obj;
+		flags = DBLL_CODE | DBLL_DATA | DBLL_SYMB;
+		status = nldr_obj->ldr_fxns.load_fxn(nldr_obj->base_lib, flags,
+						     &save_attrs, &ul_entry);
+	}
+	if (!status) {
+		*nldr = (struct nldr_object *)nldr_obj;
+	} else {
+		if (nldr_obj)
+			nldr_delete((struct nldr_object *)nldr_obj);
+
+		*nldr = NULL;
+	}
+	/* FIXME:Temp. Fix. Must be removed */
+	DBC_ENSURE((!status && *nldr) || (status && *nldr == NULL));
+	return status;
+}
+
+/*
+ *  ======== nldr_delete ========
+ */
+void nldr_delete(struct nldr_object *nldr_obj)
+{
+	struct ovly_sect *ovly_section;
+	struct ovly_sect *next;
+	u16 i;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(nldr_obj);
+
+	nldr_obj->ldr_fxns.exit_fxn();
+	if (nldr_obj->rmm)
+		rmm_delete(nldr_obj->rmm);
+
+	kfree(nldr_obj->seg_table);
+
+	if (nldr_obj->hdcd_mgr)
+		dcd_destroy_manager(nldr_obj->hdcd_mgr);
+
+	/* Free overlay node information */
+	if (nldr_obj->ovly_table) {
+		for (i = 0; i < nldr_obj->ovly_nodes; i++) {
+			ovly_section =
+			    nldr_obj->ovly_table[i].create_sects_list;
+			while (ovly_section) {
+				next = ovly_section->next_sect;
+				kfree(ovly_section);
+				ovly_section = next;
+			}
+			ovly_section =
+			    nldr_obj->ovly_table[i].delete_sects_list;
+			while (ovly_section) {
+				next = ovly_section->next_sect;
+				kfree(ovly_section);
+				ovly_section = next;
+			}
+			ovly_section =
+			    nldr_obj->ovly_table[i].execute_sects_list;
+			while (ovly_section) {
+				next = ovly_section->next_sect;
+				kfree(ovly_section);
+				ovly_section = next;
+			}
+			ovly_section = nldr_obj->ovly_table[i].other_sects_list;
+			while (ovly_section) {
+				next = ovly_section->next_sect;
+				kfree(ovly_section);
+				ovly_section = next;
+			}
+		}
+		kfree(nldr_obj->ovly_table);
+	}
+	kfree(nldr_obj);
+}
+
+/*
+ *  ======== nldr_exit ========
+ *  Discontinue usage of NLDR module.
+ */
+void nldr_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	if (refs == 0)
+		rmm_exit();
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== nldr_get_fxn_addr ========
+ */
+int nldr_get_fxn_addr(struct nldr_nodeobject *nldr_node_obj,
+			     char *str_fxn, u32 * addr)
+{
+	struct dbll_sym_val *dbll_sym;
+	struct nldr_object *nldr_obj;
+	int status = 0;
+	bool status1 = false;
+	s32 i = 0;
+	struct lib_node root = { NULL, 0, NULL };
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(nldr_node_obj);
+	DBC_REQUIRE(addr != NULL);
+	DBC_REQUIRE(str_fxn != NULL);
+
+	nldr_obj = nldr_node_obj->nldr_obj;
+	/* Called from node_create(), node_delete(), or node_run(). */
+	if (nldr_node_obj->dynamic && *nldr_node_obj->pf_phase_split) {
+		switch (nldr_node_obj->phase) {
+		case NLDR_CREATE:
+			root = nldr_node_obj->create_lib;
+			break;
+		case NLDR_EXECUTE:
+			root = nldr_node_obj->execute_lib;
+			break;
+		case NLDR_DELETE:
+			root = nldr_node_obj->delete_lib;
+			break;
+		default:
+			DBC_ASSERT(false);
+			break;
+		}
+	} else {
+		/* for Overlay nodes or non-split Dynamic nodes */
+		root = nldr_node_obj->root;
+	}
+	status1 =
+	    nldr_obj->ldr_fxns.get_c_addr_fxn(root.lib, str_fxn, &dbll_sym);
+	if (!status1)
+		status1 =
+		    nldr_obj->ldr_fxns.get_addr_fxn(root.lib, str_fxn,
+						    &dbll_sym);
+
+	/* If symbol not found, check dependent libraries */
+	if (!status1) {
+		for (i = 0; i < root.dep_libs; i++) {
+			status1 =
+			    nldr_obj->ldr_fxns.get_addr_fxn(root.dep_libs_tree
+							    [i].lib, str_fxn,
+							    &dbll_sym);
+			if (!status1) {
+				status1 =
+				    nldr_obj->ldr_fxns.
+				    get_c_addr_fxn(root.dep_libs_tree[i].lib,
+						   str_fxn, &dbll_sym);
+			}
+			if (status1) {
+				/* Symbol found */
+				break;
+			}
+		}
+	}
+	/* Check persistent libraries */
+	if (!status1) {
+		for (i = 0; i < nldr_node_obj->pers_libs; i++) {
+			status1 =
+			    nldr_obj->ldr_fxns.
+			    get_addr_fxn(nldr_node_obj->pers_lib_table[i].lib,
+					 str_fxn, &dbll_sym);
+			if (!status1) {
+				status1 =
+				    nldr_obj->ldr_fxns.
+				    get_c_addr_fxn(nldr_node_obj->pers_lib_table
+						   [i].lib, str_fxn, &dbll_sym);
+			}
+			if (status1) {
+				/* Symbol found */
+				break;
+			}
+		}
+	}
+
+	if (status1)
+		*addr = dbll_sym->value;
+	else
+		status = -ESPIPE;
+
+	return status;
+}
+
+/*
+ *  ======== nldr_get_rmm_manager ========
+ *  Given a NLDR object, retrieve RMM Manager Handle
+ */
+int nldr_get_rmm_manager(struct nldr_object *nldr,
+				struct rmm_target_obj **rmm_mgr)
+{
+	int status = 0;
+	struct nldr_object *nldr_obj = nldr;
+	DBC_REQUIRE(rmm_mgr != NULL);
+
+	if (nldr) {
+		*rmm_mgr = nldr_obj->rmm;
+	} else {
+		*rmm_mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (rmm_mgr != NULL && *rmm_mgr == NULL));
+
+	return status;
+}
+
+/*
+ *  ======== nldr_init ========
+ *  Initialize the NLDR module.
+ */
+bool nldr_init(void)
+{
+	DBC_REQUIRE(refs >= 0);
+
+	if (refs == 0)
+		rmm_init();
+
+	refs++;
+
+	DBC_ENSURE(refs > 0);
+	return true;
+}
+
+/*
+ *  ======== nldr_load ========
+ */
+int nldr_load(struct nldr_nodeobject *nldr_node_obj,
+		     enum nldr_phase phase)
+{
+	struct nldr_object *nldr_obj;
+	struct dsp_uuid lib_uuid;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(nldr_node_obj);
+
+	nldr_obj = nldr_node_obj->nldr_obj;
+
+	if (nldr_node_obj->dynamic) {
+		nldr_node_obj->phase = phase;
+
+		lib_uuid = nldr_node_obj->uuid;
+
+		/* At this point, we may not know if node is split into
+		 * different libraries. So we'll go ahead and load the
+		 * library, and then save the pointer to the appropriate
+		 * location after we know. */
+
+		status =
+		    load_lib(nldr_node_obj, &nldr_node_obj->root, lib_uuid,
+			     false, nldr_node_obj->lib_path, phase, 0);
+
+		if (!status) {
+			if (*nldr_node_obj->pf_phase_split) {
+				switch (phase) {
+				case NLDR_CREATE:
+					nldr_node_obj->create_lib =
+					    nldr_node_obj->root;
+					break;
+
+				case NLDR_EXECUTE:
+					nldr_node_obj->execute_lib =
+					    nldr_node_obj->root;
+					break;
+
+				case NLDR_DELETE:
+					nldr_node_obj->delete_lib =
+					    nldr_node_obj->root;
+					break;
+
+				default:
+					DBC_ASSERT(false);
+					break;
+				}
+			}
+		}
+	} else {
+		if (nldr_node_obj->overlay)
+			status = load_ovly(nldr_node_obj, phase);
+
+	}
+
+	return status;
+}
+
+/*
+ *  ======== nldr_unload ========
+ */
+int nldr_unload(struct nldr_nodeobject *nldr_node_obj,
+		       enum nldr_phase phase)
+{
+	int status = 0;
+	struct lib_node *root_lib = NULL;
+	s32 i = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(nldr_node_obj);
+
+	if (nldr_node_obj != NULL) {
+		if (nldr_node_obj->dynamic) {
+			if (*nldr_node_obj->pf_phase_split) {
+				switch (phase) {
+				case NLDR_CREATE:
+					root_lib = &nldr_node_obj->create_lib;
+					break;
+				case NLDR_EXECUTE:
+					root_lib = &nldr_node_obj->execute_lib;
+					break;
+				case NLDR_DELETE:
+					root_lib = &nldr_node_obj->delete_lib;
+					/* Unload persistent libraries */
+					for (i = 0;
+					     i < nldr_node_obj->pers_libs;
+					     i++) {
+						unload_lib(nldr_node_obj,
+							   &nldr_node_obj->
+							   pers_lib_table[i]);
+					}
+					nldr_node_obj->pers_libs = 0;
+					break;
+				default:
+					DBC_ASSERT(false);
+					break;
+				}
+			} else {
+				/* Unload main library */
+				root_lib = &nldr_node_obj->root;
+			}
+			if (root_lib)
+				unload_lib(nldr_node_obj, root_lib);
+		} else {
+			if (nldr_node_obj->overlay)
+				unload_ovly(nldr_node_obj, phase);
+
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== add_ovly_info ========
+ */
+static int add_ovly_info(void *handle, struct dbll_sect_info *sect_info,
+				u32 addr, u32 bytes)
+{
+	char *node_name;
+	char *sect_name = (char *)sect_info->name;
+	bool sect_exists = false;
+	char seps = ':';
+	char *pch;
+	u16 i;
+	struct nldr_object *nldr_obj = (struct nldr_object *)handle;
+	int status = 0;
+
+	/* Is this an overlay section (load address != run address)? */
+	if (sect_info->sect_load_addr == sect_info->sect_run_addr)
+		goto func_end;
+
+	/* Find the node it belongs to */
+	for (i = 0; i < nldr_obj->ovly_nodes; i++) {
+		node_name = nldr_obj->ovly_table[i].node_name;
+		DBC_REQUIRE(node_name);
+		if (strncmp(node_name, sect_name + 1, strlen(node_name)) == 0) {
+			/* Found the node */
+			break;
+		}
+	}
+	if (!(i < nldr_obj->ovly_nodes))
+		goto func_end;
+
+	/* Determine which phase this section belongs to */
+	for (pch = sect_name + 1; *pch && *pch != seps; pch++)
+		;;
+
+	if (*pch) {
+		pch++;		/* Skip over the ':' */
+		if (strncmp(pch, PCREATE, strlen(PCREATE)) == 0) {
+			status =
+			    add_ovly_sect(nldr_obj,
+					  &nldr_obj->
+					  ovly_table[i].create_sects_list,
+					  sect_info, &sect_exists, addr, bytes);
+			if (!status && !sect_exists)
+				nldr_obj->ovly_table[i].create_sects++;
+
+		} else if (strncmp(pch, PDELETE, strlen(PDELETE)) == 0) {
+			status =
+			    add_ovly_sect(nldr_obj,
+					  &nldr_obj->
+					  ovly_table[i].delete_sects_list,
+					  sect_info, &sect_exists, addr, bytes);
+			if (!status && !sect_exists)
+				nldr_obj->ovly_table[i].delete_sects++;
+
+		} else if (strncmp(pch, PEXECUTE, strlen(PEXECUTE)) == 0) {
+			status =
+			    add_ovly_sect(nldr_obj,
+					  &nldr_obj->
+					  ovly_table[i].execute_sects_list,
+					  sect_info, &sect_exists, addr, bytes);
+			if (!status && !sect_exists)
+				nldr_obj->ovly_table[i].execute_sects++;
+
+		} else {
+			/* Put in "other" sectins */
+			status =
+			    add_ovly_sect(nldr_obj,
+					  &nldr_obj->
+					  ovly_table[i].other_sects_list,
+					  sect_info, &sect_exists, addr, bytes);
+			if (!status && !sect_exists)
+				nldr_obj->ovly_table[i].other_sects++;
+
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== add_ovly_node =========
+ *  Callback function passed to dcd_get_objects.
+ */
+static int add_ovly_node(struct dsp_uuid *uuid_obj,
+				enum dsp_dcdobjtype obj_type, void *handle)
+{
+	struct nldr_object *nldr_obj = (struct nldr_object *)handle;
+	char *node_name = NULL;
+	char *pbuf = NULL;
+	u32 len;
+	struct dcd_genericobj obj_def;
+	int status = 0;
+
+	if (obj_type != DSP_DCDNODETYPE)
+		goto func_end;
+
+	status =
+	    dcd_get_object_def(nldr_obj->hdcd_mgr, uuid_obj, obj_type,
+			       &obj_def);
+	if (status)
+		goto func_end;
+
+	/* If overlay node, add to the list */
+	if (obj_def.obj_data.node_obj.us_load_type == NLDR_OVLYLOAD) {
+		if (nldr_obj->ovly_table == NULL) {
+			nldr_obj->ovly_nodes++;
+		} else {
+			/* Add node to table */
+			nldr_obj->ovly_table[nldr_obj->ovly_nid].uuid =
+			    *uuid_obj;
+			DBC_REQUIRE(obj_def.obj_data.node_obj.ndb_props.
+				    ac_name);
+			len =
+			    strlen(obj_def.obj_data.node_obj.ndb_props.ac_name);
+			node_name = obj_def.obj_data.node_obj.ndb_props.ac_name;
+			pbuf = kzalloc(len + 1, GFP_KERNEL);
+			if (pbuf == NULL) {
+				status = -ENOMEM;
+			} else {
+				strncpy(pbuf, node_name, len);
+				nldr_obj->ovly_table[nldr_obj->ovly_nid].
+				    node_name = pbuf;
+				nldr_obj->ovly_nid++;
+			}
+		}
+	}
+	/* These were allocated in dcd_get_object_def */
+	kfree(obj_def.obj_data.node_obj.pstr_create_phase_fxn);
+
+	kfree(obj_def.obj_data.node_obj.pstr_execute_phase_fxn);
+
+	kfree(obj_def.obj_data.node_obj.pstr_delete_phase_fxn);
+
+	kfree(obj_def.obj_data.node_obj.pstr_i_alg_name);
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== add_ovly_sect ========
+ */
+static int add_ovly_sect(struct nldr_object *nldr_obj,
+				struct ovly_sect **lst,
+				struct dbll_sect_info *sect_inf,
+				bool *exists, u32 addr, u32 bytes)
+{
+	struct ovly_sect *new_sect = NULL;
+	struct ovly_sect *last_sect;
+	struct ovly_sect *ovly_section;
+	int status = 0;
+
+	ovly_section = last_sect = *lst;
+	*exists = false;
+	while (ovly_section) {
+		/*
+		 *  Make sure section has not already been added. Multiple
+		 *  'write' calls may be made to load the section.
+		 */
+		if (ovly_section->sect_load_addr == addr) {
+			/* Already added */
+			*exists = true;
+			break;
+		}
+		last_sect = ovly_section;
+		ovly_section = ovly_section->next_sect;
+	}
+
+	if (!ovly_section) {
+		/* New section */
+		new_sect = kzalloc(sizeof(struct ovly_sect), GFP_KERNEL);
+		if (new_sect == NULL) {
+			status = -ENOMEM;
+		} else {
+			new_sect->sect_load_addr = addr;
+			new_sect->sect_run_addr = sect_inf->sect_run_addr +
+			    (addr - sect_inf->sect_load_addr);
+			new_sect->size = bytes;
+			new_sect->page = sect_inf->type;
+		}
+
+		/* Add to the list */
+		if (!status) {
+			if (*lst == NULL) {
+				/* First in the list */
+				*lst = new_sect;
+			} else {
+				last_sect->next_sect = new_sect;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== fake_ovly_write ========
+ */
+static s32 fake_ovly_write(void *handle, u32 dsp_address, void *buf, u32 bytes,
+			   s32 mtype)
+{
+	return (s32) bytes;
+}
+
+/*
+ *  ======== free_sects ========
+ */
+static void free_sects(struct nldr_object *nldr_obj,
+		       struct ovly_sect *phase_sects, u16 alloc_num)
+{
+	struct ovly_sect *ovly_section = phase_sects;
+	u16 i = 0;
+	bool ret;
+
+	while (ovly_section && i < alloc_num) {
+		/* 'Deallocate' */
+		/* segid - page not supported yet */
+		/* Reserved memory */
+		ret =
+		    rmm_free(nldr_obj->rmm, 0, ovly_section->sect_run_addr,
+			     ovly_section->size, true);
+		DBC_ASSERT(ret);
+		ovly_section = ovly_section->next_sect;
+		i++;
+	}
+}
+
+/*
+ *  ======== get_symbol_value ========
+ *  Find symbol in library's base image.  If not there, check dependent
+ *  libraries.
+ */
+static bool get_symbol_value(void *handle, void *parg, void *rmm_handle,
+			     char *sym_name, struct dbll_sym_val **sym)
+{
+	struct nldr_object *nldr_obj = (struct nldr_object *)handle;
+	struct nldr_nodeobject *nldr_node_obj =
+	    (struct nldr_nodeobject *)rmm_handle;
+	struct lib_node *root = (struct lib_node *)parg;
+	u16 i;
+	bool status = false;
+
+	/* check the base image */
+	status = nldr_obj->ldr_fxns.get_addr_fxn(nldr_obj->base_lib,
+						 sym_name, sym);
+	if (!status)
+		status =
+		    nldr_obj->ldr_fxns.get_c_addr_fxn(nldr_obj->base_lib,
+							sym_name, sym);
+
+	/*
+	 *  Check in root lib itself. If the library consists of
+	 *  multiple object files linked together, some symbols in the
+	 *  library may need to be resolved.
+	 */
+	if (!status) {
+		status = nldr_obj->ldr_fxns.get_addr_fxn(root->lib, sym_name,
+							 sym);
+		if (!status) {
+			status =
+			    nldr_obj->ldr_fxns.get_c_addr_fxn(root->lib,
+							      sym_name, sym);
+		}
+	}
+
+	/*
+	 *  Check in root lib's dependent libraries, but not dependent
+	 *  libraries' dependents.
+	 */
+	if (!status) {
+		for (i = 0; i < root->dep_libs; i++) {
+			status =
+			    nldr_obj->ldr_fxns.get_addr_fxn(root->
+							    dep_libs_tree
+							    [i].lib,
+							    sym_name, sym);
+			if (!status) {
+				status =
+				    nldr_obj->ldr_fxns.
+				    get_c_addr_fxn(root->dep_libs_tree[i].lib,
+						   sym_name, sym);
+			}
+			if (status) {
+				/* Symbol found */
+				break;
+			}
+		}
+	}
+	/*
+	 * Check in persistent libraries
+	 */
+	if (!status) {
+		for (i = 0; i < nldr_node_obj->pers_libs; i++) {
+			status =
+			    nldr_obj->ldr_fxns.
+			    get_addr_fxn(nldr_node_obj->pers_lib_table[i].lib,
+					 sym_name, sym);
+			if (!status) {
+				status = nldr_obj->ldr_fxns.get_c_addr_fxn
+				    (nldr_node_obj->pers_lib_table[i].lib,
+				     sym_name, sym);
+			}
+			if (status) {
+				/* Symbol found */
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== load_lib ========
+ *  Recursively load library and all its dependent libraries. The library
+ *  we're loading is specified by a uuid.
+ */
+static int load_lib(struct nldr_nodeobject *nldr_node_obj,
+			   struct lib_node *root, struct dsp_uuid uuid,
+			   bool root_prstnt,
+			   struct dbll_library_obj **lib_path,
+			   enum nldr_phase phase, u16 depth)
+{
+	struct nldr_object *nldr_obj = nldr_node_obj->nldr_obj;
+	u16 nd_libs = 0;	/* Number of dependent libraries */
+	u16 np_libs = 0;	/* Number of persistent libraries */
+	u16 nd_libs_loaded = 0;	/* Number of dep. libraries loaded */
+	u16 i;
+	u32 entry;
+	u32 dw_buf_size = NLDR_MAXPATHLENGTH;
+	dbll_flags flags = DBLL_SYMB | DBLL_CODE | DBLL_DATA | DBLL_DYNAMIC;
+	struct dbll_attrs new_attrs;
+	char *psz_file_name = NULL;
+	struct dsp_uuid *dep_lib_uui_ds = NULL;
+	bool *persistent_dep_libs = NULL;
+	int status = 0;
+	bool lib_status = false;
+	struct lib_node *dep_lib;
+
+	if (depth > MAXDEPTH) {
+		/* Error */
+		DBC_ASSERT(false);
+	}
+	root->lib = NULL;
+	/* Allocate a buffer for library file name of size DBL_MAXPATHLENGTH */
+	psz_file_name = kzalloc(DBLL_MAXPATHLENGTH, GFP_KERNEL);
+	if (psz_file_name == NULL)
+		status = -ENOMEM;
+
+	if (!status) {
+		/* Get the name of the library */
+		if (depth == 0) {
+			status =
+			    dcd_get_library_name(nldr_node_obj->nldr_obj->
+						 hdcd_mgr, &uuid, psz_file_name,
+						 &dw_buf_size, phase,
+						 nldr_node_obj->pf_phase_split);
+		} else {
+			/* Dependent libraries are registered with a phase */
+			status =
+			    dcd_get_library_name(nldr_node_obj->nldr_obj->
+						 hdcd_mgr, &uuid, psz_file_name,
+						 &dw_buf_size, NLDR_NOPHASE,
+						 NULL);
+		}
+	}
+	if (!status) {
+		/* Open the library, don't load symbols */
+		status =
+		    nldr_obj->ldr_fxns.open_fxn(nldr_obj->dbll, psz_file_name,
+						DBLL_NOLOAD, &root->lib);
+	}
+	/* Done with file name */
+	kfree(psz_file_name);
+
+	/* Check to see if library not already loaded */
+	if (!status && root_prstnt) {
+		lib_status =
+		    find_in_persistent_lib_array(nldr_node_obj, root->lib);
+		/* Close library */
+		if (lib_status) {
+			nldr_obj->ldr_fxns.close_fxn(root->lib);
+			return 0;
+		}
+	}
+	if (!status) {
+		/* Check for circular dependencies. */
+		for (i = 0; i < depth; i++) {
+			if (root->lib == lib_path[i]) {
+				/* This condition could be checked by a
+				 * tool at build time. */
+				status = -EILSEQ;
+			}
+		}
+	}
+	if (!status) {
+		/* Add library to current path in dependency tree */
+		lib_path[depth] = root->lib;
+		depth++;
+		/* Get number of dependent libraries */
+		status =
+		    dcd_get_num_dep_libs(nldr_node_obj->nldr_obj->hdcd_mgr,
+					 &uuid, &nd_libs, &np_libs, phase);
+	}
+	DBC_ASSERT(nd_libs >= np_libs);
+	if (!status) {
+		if (!(*nldr_node_obj->pf_phase_split))
+			np_libs = 0;
+
+		/* nd_libs = #of dependent libraries */
+		root->dep_libs = nd_libs - np_libs;
+		if (nd_libs > 0) {
+			dep_lib_uui_ds = kzalloc(sizeof(struct dsp_uuid) *
+							nd_libs, GFP_KERNEL);
+			persistent_dep_libs =
+				kzalloc(sizeof(bool) * nd_libs, GFP_KERNEL);
+			if (!dep_lib_uui_ds || !persistent_dep_libs)
+				status = -ENOMEM;
+
+			if (root->dep_libs > 0) {
+				/* Allocate arrays for dependent lib UUIDs,
+				 * lib nodes */
+				root->dep_libs_tree = kzalloc
+						(sizeof(struct lib_node) *
+						(root->dep_libs), GFP_KERNEL);
+				if (!(root->dep_libs_tree))
+					status = -ENOMEM;
+
+			}
+
+			if (!status) {
+				/* Get the dependent library UUIDs */
+				status =
+				    dcd_get_dep_libs(nldr_node_obj->
+						     nldr_obj->hdcd_mgr, &uuid,
+						     nd_libs, dep_lib_uui_ds,
+						     persistent_dep_libs,
+						     phase);
+			}
+		}
+	}
+
+	/*
+	 *  Recursively load dependent libraries.
+	 */
+	if (!status) {
+		for (i = 0; i < nd_libs; i++) {
+			/* If root library is NOT persistent, and dep library
+			 * is, then record it.  If root library IS persistent,
+			 * the deplib is already included */
+			if (!root_prstnt && persistent_dep_libs[i] &&
+			    *nldr_node_obj->pf_phase_split) {
+				if ((nldr_node_obj->pers_libs) >= MAXLIBS) {
+					status = -EILSEQ;
+					break;
+				}
+
+				/* Allocate library outside of phase */
+				dep_lib =
+				    &nldr_node_obj->pers_lib_table
+				    [nldr_node_obj->pers_libs];
+			} else {
+				if (root_prstnt)
+					persistent_dep_libs[i] = true;
+
+				/* Allocate library within phase */
+				dep_lib = &root->dep_libs_tree[nd_libs_loaded];
+			}
+
+			status = load_lib(nldr_node_obj, dep_lib,
+					  dep_lib_uui_ds[i],
+					  persistent_dep_libs[i], lib_path,
+					  phase, depth);
+
+			if (!status) {
+				if ((status != 0) &&
+				    !root_prstnt && persistent_dep_libs[i] &&
+				    *nldr_node_obj->pf_phase_split) {
+					(nldr_node_obj->pers_libs)++;
+				} else {
+					if (!persistent_dep_libs[i] ||
+					    !(*nldr_node_obj->pf_phase_split)) {
+						nd_libs_loaded++;
+					}
+				}
+			} else {
+				break;
+			}
+		}
+	}
+
+	/* Now we can load the root library */
+	if (!status) {
+		new_attrs = nldr_obj->ldr_attrs;
+		new_attrs.sym_arg = root;
+		new_attrs.rmm_handle = nldr_node_obj;
+		new_attrs.input_params = nldr_node_obj->priv_ref;
+		new_attrs.base_image = false;
+
+		status =
+		    nldr_obj->ldr_fxns.load_fxn(root->lib, flags, &new_attrs,
+						&entry);
+	}
+
+	/*
+	 *  In case of failure, unload any dependent libraries that
+	 *  were loaded, and close the root library.
+	 *  (Persistent libraries are unloaded from the very top)
+	 */
+	if (status) {
+		if (phase != NLDR_EXECUTE) {
+			for (i = 0; i < nldr_node_obj->pers_libs; i++)
+				unload_lib(nldr_node_obj,
+					   &nldr_node_obj->pers_lib_table[i]);
+
+			nldr_node_obj->pers_libs = 0;
+		}
+		for (i = 0; i < nd_libs_loaded; i++)
+			unload_lib(nldr_node_obj, &root->dep_libs_tree[i]);
+
+		if (root->lib)
+			nldr_obj->ldr_fxns.close_fxn(root->lib);
+
+	}
+
+	/* Going up one node in the dependency tree */
+	depth--;
+
+	kfree(dep_lib_uui_ds);
+	dep_lib_uui_ds = NULL;
+
+	kfree(persistent_dep_libs);
+	persistent_dep_libs = NULL;
+
+	return status;
+}
+
+/*
+ *  ======== load_ovly ========
+ */
+static int load_ovly(struct nldr_nodeobject *nldr_node_obj,
+			    enum nldr_phase phase)
+{
+	struct nldr_object *nldr_obj = nldr_node_obj->nldr_obj;
+	struct ovly_node *po_node = NULL;
+	struct ovly_sect *phase_sects = NULL;
+	struct ovly_sect *other_sects_list = NULL;
+	u16 i;
+	u16 alloc_num = 0;
+	u16 other_alloc = 0;
+	u16 *ref_count = NULL;
+	u16 *other_ref = NULL;
+	u32 bytes;
+	struct ovly_sect *ovly_section;
+	int status = 0;
+
+	/* Find the node in the table */
+	for (i = 0; i < nldr_obj->ovly_nodes; i++) {
+		if (is_equal_uuid
+		    (&nldr_node_obj->uuid, &nldr_obj->ovly_table[i].uuid)) {
+			/* Found it */
+			po_node = &(nldr_obj->ovly_table[i]);
+			break;
+		}
+	}
+
+	DBC_ASSERT(i < nldr_obj->ovly_nodes);
+
+	if (!po_node) {
+		status = -ENOENT;
+		goto func_end;
+	}
+
+	switch (phase) {
+	case NLDR_CREATE:
+		ref_count = &(po_node->create_ref);
+		other_ref = &(po_node->other_ref);
+		phase_sects = po_node->create_sects_list;
+		other_sects_list = po_node->other_sects_list;
+		break;
+
+	case NLDR_EXECUTE:
+		ref_count = &(po_node->execute_ref);
+		phase_sects = po_node->execute_sects_list;
+		break;
+
+	case NLDR_DELETE:
+		ref_count = &(po_node->delete_ref);
+		phase_sects = po_node->delete_sects_list;
+		break;
+
+	default:
+		DBC_ASSERT(false);
+		break;
+	}
+
+	if (ref_count == NULL)
+		goto func_end;
+
+	if (*ref_count != 0)
+		goto func_end;
+
+	/* 'Allocate' memory for overlay sections of this phase */
+	ovly_section = phase_sects;
+	while (ovly_section) {
+		/* allocate *//* page not supported yet */
+		/* reserve *//* align */
+		status = rmm_alloc(nldr_obj->rmm, 0, ovly_section->size, 0,
+				   &(ovly_section->sect_run_addr), true);
+		if (!status) {
+			ovly_section = ovly_section->next_sect;
+			alloc_num++;
+		} else {
+			break;
+		}
+	}
+	if (other_ref && *other_ref == 0) {
+		/* 'Allocate' memory for other overlay sections
+		 * (create phase) */
+		if (!status) {
+			ovly_section = other_sects_list;
+			while (ovly_section) {
+				/* page not supported *//* align */
+				/* reserve */
+				status =
+				    rmm_alloc(nldr_obj->rmm, 0,
+					      ovly_section->size, 0,
+					      &(ovly_section->sect_run_addr),
+					      true);
+				if (!status) {
+					ovly_section = ovly_section->next_sect;
+					other_alloc++;
+				} else {
+					break;
+				}
+			}
+		}
+	}
+	if (*ref_count == 0) {
+		if (!status) {
+			/* Load sections for this phase */
+			ovly_section = phase_sects;
+			while (ovly_section && !status) {
+				bytes =
+				    (*nldr_obj->ovly_fxn) (nldr_node_obj->
+							   priv_ref,
+							   ovly_section->
+							   sect_run_addr,
+							   ovly_section->
+							   sect_load_addr,
+							   ovly_section->size,
+							   ovly_section->page);
+				if (bytes != ovly_section->size)
+					status = -EPERM;
+
+				ovly_section = ovly_section->next_sect;
+			}
+		}
+	}
+	if (other_ref && *other_ref == 0) {
+		if (!status) {
+			/* Load other sections (create phase) */
+			ovly_section = other_sects_list;
+			while (ovly_section && !status) {
+				bytes =
+				    (*nldr_obj->ovly_fxn) (nldr_node_obj->
+							   priv_ref,
+							   ovly_section->
+							   sect_run_addr,
+							   ovly_section->
+							   sect_load_addr,
+							   ovly_section->size,
+							   ovly_section->page);
+				if (bytes != ovly_section->size)
+					status = -EPERM;
+
+				ovly_section = ovly_section->next_sect;
+			}
+		}
+	}
+	if (status) {
+		/* 'Deallocate' memory */
+		free_sects(nldr_obj, phase_sects, alloc_num);
+		free_sects(nldr_obj, other_sects_list, other_alloc);
+	}
+func_end:
+	if (!status && (ref_count != NULL)) {
+		*ref_count += 1;
+		if (other_ref)
+			*other_ref += 1;
+
+	}
+
+	return status;
+}
+
+/*
+ *  ======== remote_alloc ========
+ */
+static int remote_alloc(void **ref, u16 mem_sect, u32 size,
+			       u32 align, u32 *dsp_address,
+			       s32 segmnt_id, s32 req,
+			       bool reserve)
+{
+	struct nldr_nodeobject *hnode = (struct nldr_nodeobject *)ref;
+	struct nldr_object *nldr_obj;
+	struct rmm_target_obj *rmm;
+	u16 mem_phase_bit = MAXFLAGS;
+	u16 segid = 0;
+	u16 i;
+	u16 mem_sect_type;
+	u32 word_size;
+	struct rmm_addr *rmm_addr_obj = (struct rmm_addr *)dsp_address;
+	bool mem_load_req = false;
+	int status = -ENOMEM;	/* Set to fail */
+	DBC_REQUIRE(hnode);
+	DBC_REQUIRE(mem_sect == DBLL_CODE || mem_sect == DBLL_DATA ||
+		    mem_sect == DBLL_BSS);
+	nldr_obj = hnode->nldr_obj;
+	rmm = nldr_obj->rmm;
+	/* Convert size to DSP words */
+	word_size =
+	    (size + nldr_obj->us_dsp_word_size -
+	     1) / nldr_obj->us_dsp_word_size;
+	/* Modify memory 'align' to account for DSP cache line size */
+	align = find_lcm(GEM_CACHE_LINE_SIZE, align);
+	dev_dbg(bridge, "%s: memory align to 0x%x\n", __func__, align);
+	if (segmnt_id != -1) {
+		rmm_addr_obj->segid = segmnt_id;
+		segid = segmnt_id;
+		mem_load_req = req;
+	} else {
+		switch (hnode->phase) {
+		case NLDR_CREATE:
+			mem_phase_bit = CREATEDATAFLAGBIT;
+			break;
+		case NLDR_DELETE:
+			mem_phase_bit = DELETEDATAFLAGBIT;
+			break;
+		case NLDR_EXECUTE:
+			mem_phase_bit = EXECUTEDATAFLAGBIT;
+			break;
+		default:
+			DBC_ASSERT(false);
+			break;
+		}
+		if (mem_sect == DBLL_CODE)
+			mem_phase_bit++;
+
+		if (mem_phase_bit < MAXFLAGS)
+			segid = hnode->seg_id[mem_phase_bit];
+
+		/* Determine if there is a memory loading requirement */
+		if ((hnode->code_data_flag_mask >> mem_phase_bit) & 0x1)
+			mem_load_req = true;
+
+	}
+	mem_sect_type = (mem_sect == DBLL_CODE) ? DYNM_CODE : DYNM_DATA;
+
+	/* Find an appropriate segment based on mem_sect */
+	if (segid == NULLID) {
+		/* No memory requirements of preferences */
+		DBC_ASSERT(!mem_load_req);
+		goto func_cont;
+	}
+	if (segid <= MAXSEGID) {
+		DBC_ASSERT(segid < nldr_obj->dload_segs);
+		/* Attempt to allocate from segid first. */
+		rmm_addr_obj->segid = segid;
+		status =
+		    rmm_alloc(rmm, segid, word_size, align, dsp_address, false);
+		if (status) {
+			dev_dbg(bridge, "%s: Unable allocate from segment %d\n",
+				__func__, segid);
+		}
+	} else {
+		/* segid > MAXSEGID ==> Internal or external memory */
+		DBC_ASSERT(segid == MEMINTERNALID || segid == MEMEXTERNALID);
+		/*  Check for any internal or external memory segment,
+		 *  depending on segid. */
+		mem_sect_type |= segid == MEMINTERNALID ?
+		    DYNM_INTERNAL : DYNM_EXTERNAL;
+		for (i = 0; i < nldr_obj->dload_segs; i++) {
+			if ((nldr_obj->seg_table[i] & mem_sect_type) !=
+			    mem_sect_type)
+				continue;
+
+			status = rmm_alloc(rmm, i, word_size, align,
+					dsp_address, false);
+			if (!status) {
+				/* Save segid for freeing later */
+				rmm_addr_obj->segid = i;
+				break;
+			}
+		}
+	}
+func_cont:
+	/* Haven't found memory yet, attempt to find any segment that works */
+	if (status == -ENOMEM && !mem_load_req) {
+		dev_dbg(bridge, "%s: Preferred segment unavailable, trying "
+			"another\n", __func__);
+		for (i = 0; i < nldr_obj->dload_segs; i++) {
+			/* All bits of mem_sect_type must be set */
+			if ((nldr_obj->seg_table[i] & mem_sect_type) !=
+			    mem_sect_type)
+				continue;
+
+			status = rmm_alloc(rmm, i, word_size, align,
+					   dsp_address, false);
+			if (!status) {
+				/* Save segid */
+				rmm_addr_obj->segid = i;
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+static int remote_free(void **ref, u16 space, u32 dsp_address,
+			      u32 size, bool reserve)
+{
+	struct nldr_object *nldr_obj = (struct nldr_object *)ref;
+	struct rmm_target_obj *rmm;
+	u32 word_size;
+	int status = -ENOMEM;	/* Set to fail */
+
+	DBC_REQUIRE(nldr_obj);
+
+	rmm = nldr_obj->rmm;
+
+	/* Convert size to DSP words */
+	word_size =
+	    (size + nldr_obj->us_dsp_word_size -
+	     1) / nldr_obj->us_dsp_word_size;
+
+	if (rmm_free(rmm, space, dsp_address, word_size, reserve))
+		status = 0;
+
+	return status;
+}
+
+/*
+ *  ======== unload_lib ========
+ */
+static void unload_lib(struct nldr_nodeobject *nldr_node_obj,
+		       struct lib_node *root)
+{
+	struct dbll_attrs new_attrs;
+	struct nldr_object *nldr_obj = nldr_node_obj->nldr_obj;
+	u16 i;
+
+	DBC_ASSERT(root != NULL);
+
+	/* Unload dependent libraries */
+	for (i = 0; i < root->dep_libs; i++)
+		unload_lib(nldr_node_obj, &root->dep_libs_tree[i]);
+
+	root->dep_libs = 0;
+
+	new_attrs = nldr_obj->ldr_attrs;
+	new_attrs.rmm_handle = nldr_obj->rmm;
+	new_attrs.input_params = nldr_node_obj->priv_ref;
+	new_attrs.base_image = false;
+	new_attrs.sym_arg = root;
+
+	if (root->lib) {
+		/* Unload the root library */
+		nldr_obj->ldr_fxns.unload_fxn(root->lib, &new_attrs);
+		nldr_obj->ldr_fxns.close_fxn(root->lib);
+	}
+
+	/* Free dependent library list */
+	kfree(root->dep_libs_tree);
+	root->dep_libs_tree = NULL;
+}
+
+/*
+ *  ======== unload_ovly ========
+ */
+static void unload_ovly(struct nldr_nodeobject *nldr_node_obj,
+			enum nldr_phase phase)
+{
+	struct nldr_object *nldr_obj = nldr_node_obj->nldr_obj;
+	struct ovly_node *po_node = NULL;
+	struct ovly_sect *phase_sects = NULL;
+	struct ovly_sect *other_sects_list = NULL;
+	u16 i;
+	u16 alloc_num = 0;
+	u16 other_alloc = 0;
+	u16 *ref_count = NULL;
+	u16 *other_ref = NULL;
+
+	/* Find the node in the table */
+	for (i = 0; i < nldr_obj->ovly_nodes; i++) {
+		if (is_equal_uuid
+		    (&nldr_node_obj->uuid, &nldr_obj->ovly_table[i].uuid)) {
+			/* Found it */
+			po_node = &(nldr_obj->ovly_table[i]);
+			break;
+		}
+	}
+
+	DBC_ASSERT(i < nldr_obj->ovly_nodes);
+
+	if (!po_node)
+		/* TODO: Should we print warning here? */
+		return;
+
+	switch (phase) {
+	case NLDR_CREATE:
+		ref_count = &(po_node->create_ref);
+		phase_sects = po_node->create_sects_list;
+		alloc_num = po_node->create_sects;
+		break;
+	case NLDR_EXECUTE:
+		ref_count = &(po_node->execute_ref);
+		phase_sects = po_node->execute_sects_list;
+		alloc_num = po_node->execute_sects;
+		break;
+	case NLDR_DELETE:
+		ref_count = &(po_node->delete_ref);
+		other_ref = &(po_node->other_ref);
+		phase_sects = po_node->delete_sects_list;
+		/* 'Other' overlay sections are unloaded in the delete phase */
+		other_sects_list = po_node->other_sects_list;
+		alloc_num = po_node->delete_sects;
+		other_alloc = po_node->other_sects;
+		break;
+	default:
+		DBC_ASSERT(false);
+		break;
+	}
+	DBC_ASSERT(ref_count && (*ref_count > 0));
+	if (ref_count && (*ref_count > 0)) {
+		*ref_count -= 1;
+		if (other_ref) {
+			DBC_ASSERT(*other_ref > 0);
+			*other_ref -= 1;
+		}
+	}
+
+	if (ref_count && *ref_count == 0) {
+		/* 'Deallocate' memory */
+		free_sects(nldr_obj, phase_sects, alloc_num);
+	}
+	if (other_ref && *other_ref == 0)
+		free_sects(nldr_obj, other_sects_list, other_alloc);
+}
+
+/*
+ *  ======== find_in_persistent_lib_array ========
+ */
+static bool find_in_persistent_lib_array(struct nldr_nodeobject *nldr_node_obj,
+					 struct dbll_library_obj *lib)
+{
+	s32 i = 0;
+
+	for (i = 0; i < nldr_node_obj->pers_libs; i++) {
+		if (lib == nldr_node_obj->pers_lib_table[i].lib)
+			return true;
+
+	}
+
+	return false;
+}
+
+/*
+ * ================ Find LCM (Least Common Multiplier ===
+ */
+static u32 find_lcm(u32 a, u32 b)
+{
+	u32 ret;
+
+	ret = a * b / gcd(a, b);
+
+	return ret;
+}
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/**
+ * nldr_find_addr() - Find the closest symbol to the given address based on
+ *		dynamic node object.
+ *
+ * @nldr_node:		Dynamic node object
+ * @sym_addr:		Given address to find the dsp symbol
+ * @offset_range:		offset range to look for dsp symbol
+ * @offset_output:		Symbol Output address
+ * @sym_name:		String with the dsp symbol
+ *
+ * 	This function finds the node library for a given address and
+ *	retrieves the dsp symbol by calling dbll_find_dsp_symbol.
+ */
+int nldr_find_addr(struct nldr_nodeobject *nldr_node, u32 sym_addr,
+			u32 offset_range, void *offset_output, char *sym_name)
+{
+	int status = 0;
+	bool status1 = false;
+	s32 i = 0;
+	struct lib_node root = { NULL, 0, NULL };
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(offset_output != NULL);
+	DBC_REQUIRE(sym_name != NULL);
+	pr_debug("%s(0x%x, 0x%x, 0x%x, 0x%x,  %s)\n", __func__, (u32) nldr_node,
+			sym_addr, offset_range, (u32) offset_output, sym_name);
+
+	if (nldr_node->dynamic && *nldr_node->pf_phase_split) {
+		switch (nldr_node->phase) {
+		case NLDR_CREATE:
+			root = nldr_node->create_lib;
+			break;
+		case NLDR_EXECUTE:
+			root = nldr_node->execute_lib;
+			break;
+		case NLDR_DELETE:
+			root = nldr_node->delete_lib;
+			break;
+		default:
+			DBC_ASSERT(false);
+			break;
+		}
+	} else {
+		/* for Overlay nodes or non-split Dynamic nodes */
+		root = nldr_node->root;
+	}
+
+	status1 = dbll_find_dsp_symbol(root.lib, sym_addr,
+			offset_range, offset_output, sym_name);
+
+	/* If symbol not found, check dependent libraries */
+	if (!status1)
+		for (i = 0; i < root.dep_libs; i++) {
+			status1 = dbll_find_dsp_symbol(
+				root.dep_libs_tree[i].lib, sym_addr,
+				offset_range, offset_output, sym_name);
+			if (status1)
+				/* Symbol found */
+				break;
+		}
+	/* Check persistent libraries */
+	if (!status1)
+		for (i = 0; i < nldr_node->pers_libs; i++) {
+			status1 = dbll_find_dsp_symbol(
+				nldr_node->pers_lib_table[i].lib, sym_addr,
+				offset_range, offset_output, sym_name);
+			if (status1)
+				/* Symbol found */
+				break;
+		}
+
+	if (!status1) {
+		pr_debug("%s: Address 0x%x not found in range %d.\n",
+					__func__, sym_addr, offset_range);
+		status = -ESPIPE;
+	}
+
+	return status;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
new file mode 100644
index 00000000000..6e9441e2126
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -0,0 +1,3234 @@
+/*
+ * node.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Node Manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/list.h>
+#include <dspbridge/memdefs.h>
+#include <dspbridge/proc.h>
+#include <dspbridge/strm.h>
+#include <dspbridge/sync.h>
+#include <dspbridge/ntfy.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/cmm.h>
+#include <dspbridge/cod.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/msg.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/dbdcd.h>
+#include <dspbridge/disp.h>
+#include <dspbridge/rms_sh.h>
+
+/*  ----------------------------------- Link Driver */
+#include <dspbridge/dspdefs.h>
+#include <dspbridge/dspioctl.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/gb.h>
+#include <dspbridge/uuidutil.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/nodepriv.h>
+#include <dspbridge/node.h>
+#include <dspbridge/dmm.h>
+
+/* Static/Dynamic Loader includes */
+#include <dspbridge/dbll.h>
+#include <dspbridge/nldr.h>
+
+#include <dspbridge/drv.h>
+#include <dspbridge/drvdefs.h>
+#include <dspbridge/resourcecleanup.h>
+#include <_tiomap.h>
+
+#include <dspbridge/dspdeh.h>
+
+#define HOSTPREFIX	  "/host"
+#define PIPEPREFIX	  "/dbpipe"
+
+#define MAX_INPUTS(h)  \
+		((h)->dcd_props.obj_data.node_obj.ndb_props.num_input_streams)
+#define MAX_OUTPUTS(h) \
+		((h)->dcd_props.obj_data.node_obj.ndb_props.num_output_streams)
+
+#define NODE_GET_PRIORITY(h) ((h)->prio)
+#define NODE_SET_PRIORITY(hnode, prio) ((hnode)->prio = prio)
+#define NODE_SET_STATE(hnode, state) ((hnode)->node_state = state)
+
+#define MAXPIPES	100	/* Max # of /pipe connections (CSL limit) */
+#define MAXDEVSUFFIXLEN 2	/* Max(Log base 10 of MAXPIPES, MAXSTREAMS) */
+
+#define PIPENAMELEN     (sizeof(PIPEPREFIX) + MAXDEVSUFFIXLEN)
+#define HOSTNAMELEN     (sizeof(HOSTPREFIX) + MAXDEVSUFFIXLEN)
+
+#define MAXDEVNAMELEN	32	/* dsp_ndbprops.ac_name size */
+#define CREATEPHASE	1
+#define EXECUTEPHASE	2
+#define DELETEPHASE	3
+
+/* Define default STRM parameters */
+/*
+ *  TBD: Put in header file, make global DSP_STRMATTRS with defaults,
+ *  or make defaults configurable.
+ */
+#define DEFAULTBUFSIZE		32
+#define DEFAULTNBUFS		2
+#define DEFAULTSEGID		0
+#define DEFAULTALIGNMENT	0
+#define DEFAULTTIMEOUT		10000
+
+#define RMSQUERYSERVER		0
+#define RMSCONFIGURESERVER	1
+#define RMSCREATENODE		2
+#define RMSEXECUTENODE		3
+#define RMSDELETENODE		4
+#define RMSCHANGENODEPRIORITY	5
+#define RMSREADMEMORY		6
+#define RMSWRITEMEMORY		7
+#define RMSCOPY			8
+#define MAXTIMEOUT		2000
+
+#define NUMRMSFXNS		9
+
+#define PWR_TIMEOUT		500	/* default PWR timeout in msec */
+
+#define STACKSEGLABEL "L1DSRAM_HEAP"	/* Label for DSP Stack Segment Addr */
+
+/*
+ *  ======== node_mgr ========
+ */
+struct node_mgr {
+	struct dev_object *hdev_obj;	/* Device object */
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+	struct dcd_manager *hdcd_mgr;	/* Proc/Node data manager */
+	struct disp_object *disp_obj;	/* Node dispatcher */
+	struct lst_list *node_list;	/* List of all allocated nodes */
+	u32 num_nodes;		/* Number of nodes in node_list */
+	u32 num_created;	/* Number of nodes *created* on DSP */
+	struct gb_t_map *pipe_map;	/* Pipe connection bit map */
+	struct gb_t_map *pipe_done_map;	/* Pipes that are half free */
+	struct gb_t_map *chnl_map;	/* Channel allocation bit map */
+	struct gb_t_map *dma_chnl_map;	/* DMA Channel allocation bit map */
+	struct gb_t_map *zc_chnl_map;	/* Zero-Copy Channel alloc bit map */
+	struct ntfy_object *ntfy_obj;	/* Manages registered notifications */
+	struct mutex node_mgr_lock;	/* For critical sections */
+	u32 ul_fxn_addrs[NUMRMSFXNS];	/* RMS function addresses */
+	struct msg_mgr *msg_mgr_obj;
+
+	/* Processor properties needed by Node Dispatcher */
+	u32 ul_num_chnls;	/* Total number of channels */
+	u32 ul_chnl_offset;	/* Offset of chnl ids rsvd for RMS */
+	u32 ul_chnl_buf_size;	/* Buffer size for data to RMS */
+	int proc_family;	/* eg, 5000 */
+	int proc_type;		/* eg, 5510 */
+	u32 udsp_word_size;	/* Size of DSP word on host bytes */
+	u32 udsp_data_mau_size;	/* Size of DSP data MAU */
+	u32 udsp_mau_size;	/* Size of MAU */
+	s32 min_pri;		/* Minimum runtime priority for node */
+	s32 max_pri;		/* Maximum runtime priority for node */
+
+	struct strm_mgr *strm_mgr_obj;	/* STRM manager */
+
+	/* Loader properties */
+	struct nldr_object *nldr_obj;	/* Handle to loader */
+	struct node_ldr_fxns nldr_fxns;	/* Handle to loader functions */
+	bool loader_init;	/* Loader Init function succeeded? */
+};
+
+/*
+ *  ======== connecttype ========
+ */
+enum connecttype {
+	NOTCONNECTED = 0,
+	NODECONNECT,
+	HOSTCONNECT,
+	DEVICECONNECT,
+};
+
+/*
+ *  ======== stream_chnl ========
+ */
+struct stream_chnl {
+	enum connecttype type;	/* Type of stream connection */
+	u32 dev_id;		/* pipe or channel id */
+};
+
+/*
+ *  ======== node_object ========
+ */
+struct node_object {
+	struct list_head list_elem;
+	struct node_mgr *hnode_mgr;	/* The manager of this node */
+	struct proc_object *hprocessor;	/* Back pointer to processor */
+	struct dsp_uuid node_uuid;	/* Node's ID */
+	s32 prio;		/* Node's current priority */
+	u32 utimeout;		/* Timeout for blocking NODE calls */
+	u32 heap_size;		/* Heap Size */
+	u32 udsp_heap_virt_addr;	/* Heap Size */
+	u32 ugpp_heap_virt_addr;	/* Heap Size */
+	enum node_type ntype;	/* Type of node: message, task, etc */
+	enum node_state node_state;	/* NODE_ALLOCATED, NODE_CREATED, ... */
+	u32 num_inputs;		/* Current number of inputs */
+	u32 num_outputs;	/* Current number of outputs */
+	u32 max_input_index;	/* Current max input stream index */
+	u32 max_output_index;	/* Current max output stream index */
+	struct stream_chnl *inputs;	/* Node's input streams */
+	struct stream_chnl *outputs;	/* Node's output streams */
+	struct node_createargs create_args;	/* Args for node create func */
+	nodeenv node_env;	/* Environment returned by RMS */
+	struct dcd_genericobj dcd_props;	/* Node properties from DCD */
+	struct dsp_cbdata *pargs;	/* Optional args to pass to node */
+	struct ntfy_object *ntfy_obj;	/* Manages registered notifications */
+	char *pstr_dev_name;	/* device name, if device node */
+	struct sync_object *sync_done;	/* Synchronize node_terminate */
+	s32 exit_status;	/* execute function return status */
+
+	/* Information needed for node_get_attr() */
+	void *device_owner;	/* If dev node, task that owns it */
+	u32 num_gpp_inputs;	/* Current # of from GPP streams */
+	u32 num_gpp_outputs;	/* Current # of to GPP streams */
+	/* Current stream connections */
+	struct dsp_streamconnect *stream_connect;
+
+	/* Message queue */
+	struct msg_queue *msg_queue_obj;
+
+	/* These fields used for SM messaging */
+	struct cmm_xlatorobject *xlator;	/* Node's SM addr translator */
+
+	/* Handle to pass to dynamic loader */
+	struct nldr_nodeobject *nldr_node_obj;
+	bool loaded;		/* Code is (dynamically) loaded */
+	bool phase_split;	/* Phases split in many libs or ovly */
+
+};
+
+/* Default buffer attributes */
+static struct dsp_bufferattr node_dfltbufattrs = {
+	0,			/* cb_struct */
+	1,			/* segment_id */
+	0,			/* buf_alignment */
+};
+
+static void delete_node(struct node_object *hnode,
+			struct process_context *pr_ctxt);
+static void delete_node_mgr(struct node_mgr *hnode_mgr);
+static void fill_stream_connect(struct node_object *node1,
+				struct node_object *node2, u32 stream1,
+				u32 stream2);
+static void fill_stream_def(struct node_object *hnode,
+			    struct node_strmdef *pstrm_def,
+			    struct dsp_strmattr *pattrs);
+static void free_stream(struct node_mgr *hnode_mgr, struct stream_chnl stream);
+static int get_fxn_address(struct node_object *hnode, u32 * fxn_addr,
+				  u32 phase);
+static int get_node_props(struct dcd_manager *hdcd_mgr,
+				 struct node_object *hnode,
+				 const struct dsp_uuid *node_uuid,
+				 struct dcd_genericobj *dcd_prop);
+static int get_proc_props(struct node_mgr *hnode_mgr,
+				 struct dev_object *hdev_obj);
+static int get_rms_fxns(struct node_mgr *hnode_mgr);
+static u32 ovly(void *priv_ref, u32 dsp_run_addr, u32 dsp_load_addr,
+		u32 ul_num_bytes, u32 mem_space);
+static u32 mem_write(void *priv_ref, u32 dsp_add, void *pbuf,
+		     u32 ul_num_bytes, u32 mem_space);
+
+static u32 refs;		/* module reference count */
+
+/* Dynamic loader functions. */
+static struct node_ldr_fxns nldr_fxns = {
+	nldr_allocate,
+	nldr_create,
+	nldr_delete,
+	nldr_exit,
+	nldr_get_fxn_addr,
+	nldr_init,
+	nldr_load,
+	nldr_unload,
+};
+
+enum node_state node_get_state(void *hnode)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	if (!pnode)
+		return -1;
+	else
+		return pnode->node_state;
+}
+
+/*
+ *  ======== node_allocate ========
+ *  Purpose:
+ *      Allocate GPP resources to manage a node on the DSP.
+ */
+int node_allocate(struct proc_object *hprocessor,
+			const struct dsp_uuid *node_uuid,
+			const struct dsp_cbdata *pargs,
+			const struct dsp_nodeattrin *attr_in,
+			struct node_res_object **noderes,
+			struct process_context *pr_ctxt)
+{
+	struct node_mgr *hnode_mgr;
+	struct dev_object *hdev_obj;
+	struct node_object *pnode = NULL;
+	enum node_type node_type = NODE_TASK;
+	struct node_msgargs *pmsg_args;
+	struct node_taskargs *ptask_args;
+	u32 num_streams;
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+	struct cmm_object *hcmm_mgr = NULL;	/* Shared memory manager hndl */
+	u32 proc_id;
+	u32 pul_value;
+	u32 dynext_base;
+	u32 off_set = 0;
+	u32 ul_stack_seg_addr, ul_stack_seg_val;
+	u32 ul_gpp_mem_base;
+	struct cfg_hostres *host_res;
+	struct bridge_dev_context *pbridge_context;
+	u32 mapped_addr = 0;
+	u32 map_attrs = 0x0;
+	struct dsp_processorstate proc_state;
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+#endif
+
+	void *node_res;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hprocessor != NULL);
+	DBC_REQUIRE(noderes != NULL);
+	DBC_REQUIRE(node_uuid != NULL);
+
+	*noderes = NULL;
+
+	status = proc_get_processor_id(hprocessor, &proc_id);
+
+	if (proc_id != DSP_UNIT)
+		goto func_end;
+
+	status = proc_get_dev_object(hprocessor, &hdev_obj);
+	if (!status) {
+		status = dev_get_node_manager(hdev_obj, &hnode_mgr);
+		if (hnode_mgr == NULL)
+			status = -EPERM;
+
+	}
+
+	if (status)
+		goto func_end;
+
+	status = dev_get_bridge_context(hdev_obj, &pbridge_context);
+	if (!pbridge_context) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in error state then don't attempt
+	   to send the message */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+
+	/* Assuming that 0 is not a valid function address */
+	if (hnode_mgr->ul_fxn_addrs[0] == 0) {
+		/* No RMS on target - we currently can't handle this */
+		pr_err("%s: Failed, no RMS in base image\n", __func__);
+		status = -EPERM;
+	} else {
+		/* Validate attr_in fields, if non-NULL */
+		if (attr_in) {
+			/* Check if attr_in->prio is within range */
+			if (attr_in->prio < hnode_mgr->min_pri ||
+			    attr_in->prio > hnode_mgr->max_pri)
+				status = -EDOM;
+		}
+	}
+	/* Allocate node object and fill in */
+	if (status)
+		goto func_end;
+
+	pnode = kzalloc(sizeof(struct node_object), GFP_KERNEL);
+	if (pnode == NULL) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	pnode->hnode_mgr = hnode_mgr;
+	/* This critical section protects get_node_props */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	/* Get dsp_ndbprops from node database */
+	status = get_node_props(hnode_mgr->hdcd_mgr, pnode, node_uuid,
+				&(pnode->dcd_props));
+	if (status)
+		goto func_cont;
+
+	pnode->node_uuid = *node_uuid;
+	pnode->hprocessor = hprocessor;
+	pnode->ntype = pnode->dcd_props.obj_data.node_obj.ndb_props.ntype;
+	pnode->utimeout = pnode->dcd_props.obj_data.node_obj.ndb_props.utimeout;
+	pnode->prio = pnode->dcd_props.obj_data.node_obj.ndb_props.prio;
+
+	/* Currently only C64 DSP builds support Node Dynamic * heaps */
+	/* Allocate memory for node heap */
+	pnode->create_args.asa.task_arg_obj.heap_size = 0;
+	pnode->create_args.asa.task_arg_obj.udsp_heap_addr = 0;
+	pnode->create_args.asa.task_arg_obj.udsp_heap_res_addr = 0;
+	pnode->create_args.asa.task_arg_obj.ugpp_heap_addr = 0;
+	if (!attr_in)
+		goto func_cont;
+
+	/* Check if we have a user allocated node heap */
+	if (!(attr_in->pgpp_virt_addr))
+		goto func_cont;
+
+	/* check for page aligned Heap size */
+	if (((attr_in->heap_size) & (PG_SIZE4K - 1))) {
+		pr_err("%s: node heap size not aligned to 4K, size = 0x%x \n",
+		       __func__, attr_in->heap_size);
+		status = -EINVAL;
+	} else {
+		pnode->create_args.asa.task_arg_obj.heap_size =
+		    attr_in->heap_size;
+		pnode->create_args.asa.task_arg_obj.ugpp_heap_addr =
+		    (u32) attr_in->pgpp_virt_addr;
+	}
+	if (status)
+		goto func_cont;
+
+	status = proc_reserve_memory(hprocessor,
+				     pnode->create_args.asa.task_arg_obj.
+				     heap_size + PAGE_SIZE,
+				     (void **)&(pnode->create_args.asa.
+					task_arg_obj.udsp_heap_res_addr),
+				     pr_ctxt);
+	if (status) {
+		pr_err("%s: Failed to reserve memory for heap: 0x%x\n",
+		       __func__, status);
+		goto func_cont;
+	}
+#ifdef DSP_DMM_DEBUG
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = DSP_EHANDLE;
+		goto func_cont;
+	}
+
+	dmm_mem_map_dump(dmm_mgr);
+#endif
+
+	map_attrs |= DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPVIRTUALADDR;
+	status = proc_map(hprocessor, (void *)attr_in->pgpp_virt_addr,
+			  pnode->create_args.asa.task_arg_obj.heap_size,
+			  (void *)pnode->create_args.asa.task_arg_obj.
+			  udsp_heap_res_addr, (void **)&mapped_addr, map_attrs,
+			  pr_ctxt);
+	if (status)
+		pr_err("%s: Failed to map memory for Heap: 0x%x\n",
+		       __func__, status);
+	else
+		pnode->create_args.asa.task_arg_obj.udsp_heap_addr =
+		    (u32) mapped_addr;
+
+func_cont:
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+	if (attr_in != NULL) {
+		/* Overrides of NBD properties */
+		pnode->utimeout = attr_in->utimeout;
+		pnode->prio = attr_in->prio;
+	}
+	/* Create object to manage notifications */
+	if (!status) {
+		pnode->ntfy_obj = kmalloc(sizeof(struct ntfy_object),
+							GFP_KERNEL);
+		if (pnode->ntfy_obj)
+			ntfy_init(pnode->ntfy_obj);
+		else
+			status = -ENOMEM;
+	}
+
+	if (!status) {
+		node_type = node_get_type(pnode);
+		/*  Allocate dsp_streamconnect array for device, task, and
+		 *  dais socket nodes. */
+		if (node_type != NODE_MESSAGE) {
+			num_streams = MAX_INPUTS(pnode) + MAX_OUTPUTS(pnode);
+			pnode->stream_connect = kzalloc(num_streams *
+					sizeof(struct dsp_streamconnect),
+					GFP_KERNEL);
+			if (num_streams > 0 && pnode->stream_connect == NULL)
+				status = -ENOMEM;
+
+		}
+		if (!status && (node_type == NODE_TASK ||
+					      node_type == NODE_DAISSOCKET)) {
+			/* Allocate arrays for maintainig stream connections */
+			pnode->inputs = kzalloc(MAX_INPUTS(pnode) *
+					sizeof(struct stream_chnl), GFP_KERNEL);
+			pnode->outputs = kzalloc(MAX_OUTPUTS(pnode) *
+					sizeof(struct stream_chnl), GFP_KERNEL);
+			ptask_args = &(pnode->create_args.asa.task_arg_obj);
+			ptask_args->strm_in_def = kzalloc(MAX_INPUTS(pnode) *
+						sizeof(struct node_strmdef),
+						GFP_KERNEL);
+			ptask_args->strm_out_def = kzalloc(MAX_OUTPUTS(pnode) *
+						sizeof(struct node_strmdef),
+						GFP_KERNEL);
+			if ((MAX_INPUTS(pnode) > 0 && (pnode->inputs == NULL ||
+						       ptask_args->strm_in_def
+						       == NULL))
+			    || (MAX_OUTPUTS(pnode) > 0
+				&& (pnode->outputs == NULL
+				    || ptask_args->strm_out_def == NULL)))
+				status = -ENOMEM;
+		}
+	}
+	if (!status && (node_type != NODE_DEVICE)) {
+		/* Create an event that will be posted when RMS_EXIT is
+		 * received. */
+		pnode->sync_done = kzalloc(sizeof(struct sync_object),
+								GFP_KERNEL);
+		if (pnode->sync_done)
+			sync_init_event(pnode->sync_done);
+		else
+			status = -ENOMEM;
+
+		if (!status) {
+			/*Get the shared mem mgr for this nodes dev object */
+			status = cmm_get_handle(hprocessor, &hcmm_mgr);
+			if (!status) {
+				/* Allocate a SM addr translator for this node
+				 * w/ deflt attr */
+				status = cmm_xlator_create(&pnode->xlator,
+							   hcmm_mgr, NULL);
+			}
+		}
+		if (!status) {
+			/* Fill in message args */
+			if ((pargs != NULL) && (pargs->cb_data > 0)) {
+				pmsg_args =
+				    &(pnode->create_args.asa.node_msg_args);
+				pmsg_args->pdata = kzalloc(pargs->cb_data,
+								GFP_KERNEL);
+				if (pmsg_args->pdata == NULL) {
+					status = -ENOMEM;
+				} else {
+					pmsg_args->arg_length = pargs->cb_data;
+					memcpy(pmsg_args->pdata,
+					       pargs->node_data,
+					       pargs->cb_data);
+				}
+			}
+		}
+	}
+
+	if (!status && node_type != NODE_DEVICE) {
+		/* Create a message queue for this node */
+		intf_fxns = hnode_mgr->intf_fxns;
+		status =
+		    (*intf_fxns->pfn_msg_create_queue) (hnode_mgr->msg_mgr_obj,
+							&pnode->msg_queue_obj,
+							0,
+							pnode->create_args.asa.
+							node_msg_args.max_msgs,
+							pnode);
+	}
+
+	if (!status) {
+		/* Create object for dynamic loading */
+
+		status = hnode_mgr->nldr_fxns.pfn_allocate(hnode_mgr->nldr_obj,
+							   (void *)pnode,
+							   &pnode->dcd_props.
+							   obj_data.node_obj,
+							   &pnode->
+							   nldr_node_obj,
+							   &pnode->phase_split);
+	}
+
+	/* Compare value read from Node Properties and check if it is same as
+	 * STACKSEGLABEL, if yes read the Address of STACKSEGLABEL, calculate
+	 * GPP Address, Read the value in that address and override the
+	 * stack_seg value in task args */
+	if (!status &&
+	    (char *)pnode->dcd_props.obj_data.node_obj.ndb_props.
+	    stack_seg_name != NULL) {
+		if (strcmp((char *)
+			   pnode->dcd_props.obj_data.node_obj.ndb_props.
+			   stack_seg_name, STACKSEGLABEL) == 0) {
+			status =
+			    hnode_mgr->nldr_fxns.
+			    pfn_get_fxn_addr(pnode->nldr_node_obj, "DYNEXT_BEG",
+					     &dynext_base);
+			if (status)
+				pr_err("%s: Failed to get addr for DYNEXT_BEG"
+				       " status = 0x%x\n", __func__, status);
+
+			status =
+			    hnode_mgr->nldr_fxns.
+			    pfn_get_fxn_addr(pnode->nldr_node_obj,
+					     "L1DSRAM_HEAP", &pul_value);
+
+			if (status)
+				pr_err("%s: Failed to get addr for L1DSRAM_HEAP"
+				       " status = 0x%x\n", __func__, status);
+
+			host_res = pbridge_context->resources;
+			if (!host_res)
+				status = -EPERM;
+
+			if (status) {
+				pr_err("%s: Failed to get host resource, status"
+				       " = 0x%x\n", __func__, status);
+				goto func_end;
+			}
+
+			ul_gpp_mem_base = (u32) host_res->dw_mem_base[1];
+			off_set = pul_value - dynext_base;
+			ul_stack_seg_addr = ul_gpp_mem_base + off_set;
+			ul_stack_seg_val = readl(ul_stack_seg_addr);
+
+			dev_dbg(bridge, "%s: StackSegVal = 0x%x, StackSegAddr ="
+				" 0x%x\n", __func__, ul_stack_seg_val,
+				ul_stack_seg_addr);
+
+			pnode->create_args.asa.task_arg_obj.stack_seg =
+			    ul_stack_seg_val;
+
+		}
+	}
+
+	if (!status) {
+		/* Add the node to the node manager's list of allocated
+		 * nodes. */
+		lst_init_elem((struct list_head *)pnode);
+		NODE_SET_STATE(pnode, NODE_ALLOCATED);
+
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+
+		lst_put_tail(hnode_mgr->node_list, (struct list_head *) pnode);
+			++(hnode_mgr->num_nodes);
+
+		/* Exit critical section */
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+
+		/* Preset this to assume phases are split
+		 * (for overlay and dll) */
+		pnode->phase_split = true;
+
+		/* Notify all clients registered for DSP_NODESTATECHANGE. */
+		proc_notify_all_clients(hprocessor, DSP_NODESTATECHANGE);
+	} else {
+		/* Cleanup */
+		if (pnode)
+			delete_node(pnode, pr_ctxt);
+
+	}
+
+	if (!status) {
+		status = drv_insert_node_res_element(pnode, &node_res, pr_ctxt);
+		if (status) {
+			delete_node(pnode, pr_ctxt);
+			goto func_end;
+		}
+
+		*noderes = (struct node_res_object *)node_res;
+		drv_proc_node_update_heap_status(node_res, true);
+		drv_proc_node_update_status(node_res, true);
+	}
+	DBC_ENSURE((status && *noderes == NULL) || (!status && *noderes));
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: %p pNodeId: %p pargs: %p attr_in: %p "
+		"node_res: %p status: 0x%x\n", __func__, hprocessor,
+		node_uuid, pargs, attr_in, noderes, status);
+	return status;
+}
+
+/*
+ *  ======== node_alloc_msg_buf ========
+ *  Purpose:
+ *      Allocates buffer for zero copy messaging.
+ */
+DBAPI node_alloc_msg_buf(struct node_object *hnode, u32 usize,
+			 struct dsp_bufferattr *pattr,
+			 u8 **pbuffer)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	int status = 0;
+	bool va_flag = false;
+	bool set_info;
+	u32 proc_id;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pbuffer != NULL);
+
+	DBC_REQUIRE(usize > 0);
+
+	if (!pnode)
+		status = -EFAULT;
+	else if (node_get_type(pnode) == NODE_DEVICE)
+		status = -EPERM;
+
+	if (status)
+		goto func_end;
+
+	if (pattr == NULL)
+		pattr = &node_dfltbufattrs;	/* set defaults */
+
+	status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+	if (proc_id != DSP_UNIT) {
+		DBC_ASSERT(NULL);
+		goto func_end;
+	}
+	/*  If segment ID includes MEM_SETVIRTUALSEGID then pbuffer is a
+	 *  virt  address, so set this info in this node's translator
+	 *  object for  future ref. If MEM_GETVIRTUALSEGID then retrieve
+	 *  virtual address  from node's translator. */
+	if ((pattr->segment_id & MEM_SETVIRTUALSEGID) ||
+	    (pattr->segment_id & MEM_GETVIRTUALSEGID)) {
+		va_flag = true;
+		set_info = (pattr->segment_id & MEM_SETVIRTUALSEGID) ?
+		    true : false;
+		/* Clear mask bits */
+		pattr->segment_id &= ~MEM_MASKVIRTUALSEGID;
+		/* Set/get this node's translators virtual address base/size */
+		status = cmm_xlator_info(pnode->xlator, pbuffer, usize,
+					 pattr->segment_id, set_info);
+	}
+	if (!status && (!va_flag)) {
+		if (pattr->segment_id != 1) {
+			/* Node supports single SM segment only. */
+			status = -EBADR;
+		}
+		/*  Arbitrary SM buffer alignment not supported for host side
+		 *  allocs, but guaranteed for the following alignment
+		 *  values. */
+		switch (pattr->buf_alignment) {
+		case 0:
+		case 1:
+		case 2:
+		case 4:
+			break;
+		default:
+			/* alignment value not suportted */
+			status = -EPERM;
+			break;
+		}
+		if (!status) {
+			/* allocate physical buffer from seg_id in node's
+			 * translator */
+			(void)cmm_xlator_alloc_buf(pnode->xlator, pbuffer,
+						   usize);
+			if (*pbuffer == NULL) {
+				pr_err("%s: error - Out of shared memory\n",
+				       __func__);
+				status = -ENOMEM;
+			}
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== node_change_priority ========
+ *  Purpose:
+ *      Change the priority of a node in the allocated state, or that is
+ *      currently running or paused on the target.
+ */
+int node_change_priority(struct node_object *hnode, s32 prio)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	struct node_mgr *hnode_mgr = NULL;
+	enum node_type node_type;
+	enum node_state state;
+	int status = 0;
+	u32 proc_id;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!hnode || !hnode->hnode_mgr) {
+		status = -EFAULT;
+	} else {
+		hnode_mgr = hnode->hnode_mgr;
+		node_type = node_get_type(hnode);
+		if (node_type != NODE_TASK && node_type != NODE_DAISSOCKET)
+			status = -EPERM;
+		else if (prio < hnode_mgr->min_pri || prio > hnode_mgr->max_pri)
+			status = -EDOM;
+	}
+	if (status)
+		goto func_end;
+
+	/* Enter critical section */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	state = node_get_state(hnode);
+	if (state == NODE_ALLOCATED || state == NODE_PAUSED) {
+		NODE_SET_PRIORITY(hnode, prio);
+	} else {
+		if (state != NODE_RUNNING) {
+			status = -EBADR;
+			goto func_cont;
+		}
+		status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+		if (proc_id == DSP_UNIT) {
+			status =
+			    disp_node_change_priority(hnode_mgr->disp_obj,
+						      hnode,
+						      hnode_mgr->ul_fxn_addrs
+						      [RMSCHANGENODEPRIORITY],
+						      hnode->node_env, prio);
+		}
+		if (status >= 0)
+			NODE_SET_PRIORITY(hnode, prio);
+
+	}
+func_cont:
+	/* Leave critical section */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== node_connect ========
+ *  Purpose:
+ *      Connect two nodes on the DSP, or a node on the DSP to the GPP.
+ */
+int node_connect(struct node_object *node1, u32 stream1,
+			struct node_object *node2,
+			u32 stream2, struct dsp_strmattr *pattrs,
+			struct dsp_cbdata *conn_param)
+{
+	struct node_mgr *hnode_mgr;
+	char *pstr_dev_name = NULL;
+	enum node_type node1_type = NODE_TASK;
+	enum node_type node2_type = NODE_TASK;
+	struct node_strmdef *pstrm_def;
+	struct node_strmdef *input = NULL;
+	struct node_strmdef *output = NULL;
+	struct node_object *dev_node_obj;
+	struct node_object *hnode;
+	struct stream_chnl *pstream;
+	u32 pipe_id = GB_NOBITS;
+	u32 chnl_id = GB_NOBITS;
+	s8 chnl_mode;
+	u32 dw_length;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+
+	if ((node1 != (struct node_object *)DSP_HGPPNODE && !node1) ||
+	    (node2 != (struct node_object *)DSP_HGPPNODE && !node2))
+		status = -EFAULT;
+
+	if (!status) {
+		/* The two nodes must be on the same processor */
+		if (node1 != (struct node_object *)DSP_HGPPNODE &&
+		    node2 != (struct node_object *)DSP_HGPPNODE &&
+		    node1->hnode_mgr != node2->hnode_mgr)
+			status = -EPERM;
+		/* Cannot connect a node to itself */
+		if (node1 == node2)
+			status = -EPERM;
+
+	}
+	if (!status) {
+		/* node_get_type() will return NODE_GPP if hnode =
+		 * DSP_HGPPNODE. */
+		node1_type = node_get_type(node1);
+		node2_type = node_get_type(node2);
+		/* Check stream indices ranges */
+		if ((node1_type != NODE_GPP && node1_type != NODE_DEVICE &&
+		     stream1 >= MAX_OUTPUTS(node1)) || (node2_type != NODE_GPP
+							  && node2_type !=
+							  NODE_DEVICE
+							  && stream2 >=
+							  MAX_INPUTS(node2)))
+			status = -EINVAL;
+	}
+	if (!status) {
+		/*
+		 *  Only the following types of connections are allowed:
+		 *      task/dais socket < == > task/dais socket
+		 *      task/dais socket < == > device
+		 *      task/dais socket < == > GPP
+		 *
+		 *  ie, no message nodes, and at least one task or dais
+		 *  socket node.
+		 */
+		if (node1_type == NODE_MESSAGE || node2_type == NODE_MESSAGE ||
+		    (node1_type != NODE_TASK && node1_type != NODE_DAISSOCKET &&
+		     node2_type != NODE_TASK && node2_type != NODE_DAISSOCKET))
+			status = -EPERM;
+	}
+	/*
+	 * Check stream mode. Default is STRMMODE_PROCCOPY.
+	 */
+	if (!status && pattrs) {
+		if (pattrs->strm_mode != STRMMODE_PROCCOPY)
+			status = -EPERM;	/* illegal stream mode */
+
+	}
+	if (status)
+		goto func_end;
+
+	if (node1_type != NODE_GPP) {
+		hnode_mgr = node1->hnode_mgr;
+	} else {
+		DBC_ASSERT(node2 != (struct node_object *)DSP_HGPPNODE);
+		hnode_mgr = node2->hnode_mgr;
+	}
+	/* Enter critical section */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	/* Nodes must be in the allocated state */
+	if (node1_type != NODE_GPP && node_get_state(node1) != NODE_ALLOCATED)
+		status = -EBADR;
+
+	if (node2_type != NODE_GPP && node_get_state(node2) != NODE_ALLOCATED)
+		status = -EBADR;
+
+	if (!status) {
+		/*  Check that stream indices for task and dais socket nodes
+		 *  are not already be used. (Device nodes checked later) */
+		if (node1_type == NODE_TASK || node1_type == NODE_DAISSOCKET) {
+			output =
+			    &(node1->create_args.asa.
+			      task_arg_obj.strm_out_def[stream1]);
+			if (output->sz_device != NULL)
+				status = -EISCONN;
+
+		}
+		if (node2_type == NODE_TASK || node2_type == NODE_DAISSOCKET) {
+			input =
+			    &(node2->create_args.asa.
+			      task_arg_obj.strm_in_def[stream2]);
+			if (input->sz_device != NULL)
+				status = -EISCONN;
+
+		}
+	}
+	/* Connecting two task nodes? */
+	if (!status && ((node1_type == NODE_TASK ||
+				       node1_type == NODE_DAISSOCKET)
+				      && (node2_type == NODE_TASK
+					  || node2_type == NODE_DAISSOCKET))) {
+		/* Find available pipe */
+		pipe_id = gb_findandset(hnode_mgr->pipe_map);
+		if (pipe_id == GB_NOBITS) {
+			status = -ECONNREFUSED;
+		} else {
+			node1->outputs[stream1].type = NODECONNECT;
+			node2->inputs[stream2].type = NODECONNECT;
+			node1->outputs[stream1].dev_id = pipe_id;
+			node2->inputs[stream2].dev_id = pipe_id;
+			output->sz_device = kzalloc(PIPENAMELEN + 1,
+							GFP_KERNEL);
+			input->sz_device = kzalloc(PIPENAMELEN + 1, GFP_KERNEL);
+			if (output->sz_device == NULL ||
+			    input->sz_device == NULL) {
+				/* Undo the connection */
+				kfree(output->sz_device);
+
+				kfree(input->sz_device);
+
+				output->sz_device = NULL;
+				input->sz_device = NULL;
+				gb_clear(hnode_mgr->pipe_map, pipe_id);
+				status = -ENOMEM;
+			} else {
+				/* Copy "/dbpipe<pipId>" name to device names */
+				sprintf(output->sz_device, "%s%d",
+					PIPEPREFIX, pipe_id);
+				strcpy(input->sz_device, output->sz_device);
+			}
+		}
+	}
+	/* Connecting task node to host? */
+	if (!status && (node1_type == NODE_GPP ||
+				      node2_type == NODE_GPP)) {
+		if (node1_type == NODE_GPP) {
+			chnl_mode = CHNL_MODETODSP;
+		} else {
+			DBC_ASSERT(node2_type == NODE_GPP);
+			chnl_mode = CHNL_MODEFROMDSP;
+		}
+		/*  Reserve a channel id. We need to put the name "/host<id>"
+		 *  in the node's create_args, but the host
+		 *  side channel will not be opened until DSPStream_Open is
+		 *  called for this node. */
+		if (pattrs) {
+			if (pattrs->strm_mode == STRMMODE_RDMA) {
+				chnl_id =
+				    gb_findandset(hnode_mgr->dma_chnl_map);
+				/* dma chans are 2nd transport chnl set
+				 * ids(e.g. 16-31) */
+				(chnl_id != GB_NOBITS) ?
+				    (chnl_id =
+				     chnl_id +
+				     hnode_mgr->ul_num_chnls) : chnl_id;
+			} else if (pattrs->strm_mode == STRMMODE_ZEROCOPY) {
+				chnl_id = gb_findandset(hnode_mgr->zc_chnl_map);
+				/* zero-copy chans are 3nd transport set
+				 * (e.g. 32-47) */
+				(chnl_id != GB_NOBITS) ? (chnl_id = chnl_id +
+							  (2 *
+							   hnode_mgr->
+							   ul_num_chnls))
+				    : chnl_id;
+			} else {	/* must be PROCCOPY */
+				DBC_ASSERT(pattrs->strm_mode ==
+					   STRMMODE_PROCCOPY);
+				chnl_id = gb_findandset(hnode_mgr->chnl_map);
+				/* e.g. 0-15 */
+			}
+		} else {
+			/* default to PROCCOPY */
+			chnl_id = gb_findandset(hnode_mgr->chnl_map);
+		}
+		if (chnl_id == GB_NOBITS) {
+			status = -ECONNREFUSED;
+			goto func_cont2;
+		}
+		pstr_dev_name = kzalloc(HOSTNAMELEN + 1, GFP_KERNEL);
+		if (pstr_dev_name != NULL)
+			goto func_cont2;
+
+		if (pattrs) {
+			if (pattrs->strm_mode == STRMMODE_RDMA) {
+				gb_clear(hnode_mgr->dma_chnl_map, chnl_id -
+					 hnode_mgr->ul_num_chnls);
+			} else if (pattrs->strm_mode == STRMMODE_ZEROCOPY) {
+				gb_clear(hnode_mgr->zc_chnl_map, chnl_id -
+					 (2 * hnode_mgr->ul_num_chnls));
+			} else {
+				DBC_ASSERT(pattrs->strm_mode ==
+					   STRMMODE_PROCCOPY);
+				gb_clear(hnode_mgr->chnl_map, chnl_id);
+			}
+		} else {
+			gb_clear(hnode_mgr->chnl_map, chnl_id);
+		}
+		status = -ENOMEM;
+func_cont2:
+		if (!status) {
+			if (node1 == (struct node_object *)DSP_HGPPNODE) {
+				node2->inputs[stream2].type = HOSTCONNECT;
+				node2->inputs[stream2].dev_id = chnl_id;
+				input->sz_device = pstr_dev_name;
+			} else {
+				node1->outputs[stream1].type = HOSTCONNECT;
+				node1->outputs[stream1].dev_id = chnl_id;
+				output->sz_device = pstr_dev_name;
+			}
+			sprintf(pstr_dev_name, "%s%d", HOSTPREFIX, chnl_id);
+		}
+	}
+	/* Connecting task node to device node? */
+	if (!status && ((node1_type == NODE_DEVICE) ||
+				      (node2_type == NODE_DEVICE))) {
+		if (node2_type == NODE_DEVICE) {
+			/* node1 == > device */
+			dev_node_obj = node2;
+			hnode = node1;
+			pstream = &(node1->outputs[stream1]);
+			pstrm_def = output;
+		} else {
+			/* device == > node2 */
+			dev_node_obj = node1;
+			hnode = node2;
+			pstream = &(node2->inputs[stream2]);
+			pstrm_def = input;
+		}
+		/* Set up create args */
+		pstream->type = DEVICECONNECT;
+		dw_length = strlen(dev_node_obj->pstr_dev_name);
+		if (conn_param != NULL) {
+			pstrm_def->sz_device = kzalloc(dw_length + 1 +
+							conn_param->cb_data,
+							GFP_KERNEL);
+		} else {
+			pstrm_def->sz_device = kzalloc(dw_length + 1,
+							GFP_KERNEL);
+		}
+		if (pstrm_def->sz_device == NULL) {
+			status = -ENOMEM;
+		} else {
+			/* Copy device name */
+			strncpy(pstrm_def->sz_device,
+				dev_node_obj->pstr_dev_name, dw_length);
+			if (conn_param != NULL) {
+				strncat(pstrm_def->sz_device,
+					(char *)conn_param->node_data,
+					(u32) conn_param->cb_data);
+			}
+			dev_node_obj->device_owner = hnode;
+		}
+	}
+	if (!status) {
+		/* Fill in create args */
+		if (node1_type == NODE_TASK || node1_type == NODE_DAISSOCKET) {
+			node1->create_args.asa.task_arg_obj.num_outputs++;
+			fill_stream_def(node1, output, pattrs);
+		}
+		if (node2_type == NODE_TASK || node2_type == NODE_DAISSOCKET) {
+			node2->create_args.asa.task_arg_obj.num_inputs++;
+			fill_stream_def(node2, input, pattrs);
+		}
+		/* Update node1 and node2 stream_connect */
+		if (node1_type != NODE_GPP && node1_type != NODE_DEVICE) {
+			node1->num_outputs++;
+			if (stream1 > node1->max_output_index)
+				node1->max_output_index = stream1;
+
+		}
+		if (node2_type != NODE_GPP && node2_type != NODE_DEVICE) {
+			node2->num_inputs++;
+			if (stream2 > node2->max_input_index)
+				node2->max_input_index = stream2;
+
+		}
+		fill_stream_connect(node1, node2, stream1, stream2);
+	}
+	/* end of sync_enter_cs */
+	/* Exit critical section */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+func_end:
+	dev_dbg(bridge, "%s: node1: %p stream1: %d node2: %p stream2: %d"
+		"pattrs: %p status: 0x%x\n", __func__, node1,
+		stream1, node2, stream2, pattrs, status);
+	return status;
+}
+
+/*
+ *  ======== node_create ========
+ *  Purpose:
+ *      Create a node on the DSP by remotely calling the node's create function.
+ */
+int node_create(struct node_object *hnode)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	struct node_mgr *hnode_mgr;
+	struct bridge_drv_interface *intf_fxns;
+	u32 ul_create_fxn;
+	enum node_type node_type;
+	int status = 0;
+	int status1 = 0;
+	struct dsp_cbdata cb_data;
+	u32 proc_id = 255;
+	struct dsp_processorstate proc_state;
+	struct proc_object *hprocessor;
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+	struct dspbridge_platform_data *pdata =
+	    omap_dspbridge_dev->dev.platform_data;
+#endif
+
+	DBC_REQUIRE(refs > 0);
+	if (!pnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hprocessor = hnode->hprocessor;
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in error state then don't attempt to create
+	   new node */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+	/* create struct dsp_cbdata struct for PWR calls */
+	cb_data.cb_data = PWR_TIMEOUT;
+	node_type = node_get_type(hnode);
+	hnode_mgr = hnode->hnode_mgr;
+	intf_fxns = hnode_mgr->intf_fxns;
+	/* Get access to node dispatcher */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	/* Check node state */
+	if (node_get_state(hnode) != NODE_ALLOCATED)
+		status = -EBADR;
+
+	if (!status)
+		status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+
+	if (status)
+		goto func_cont2;
+
+	if (proc_id != DSP_UNIT)
+		goto func_cont2;
+
+	/* Make sure streams are properly connected */
+	if ((hnode->num_inputs && hnode->max_input_index >
+	     hnode->num_inputs - 1) ||
+	    (hnode->num_outputs && hnode->max_output_index >
+	     hnode->num_outputs - 1))
+		status = -ENOTCONN;
+
+	if (!status) {
+		/* If node's create function is not loaded, load it */
+		/* Boost the OPP level to max level that DSP can be requested */
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+		if (pdata->cpu_set_freq)
+			(*pdata->cpu_set_freq) (pdata->mpu_speed[VDD1_OPP3]);
+#endif
+		status = hnode_mgr->nldr_fxns.pfn_load(hnode->nldr_node_obj,
+						       NLDR_CREATE);
+		/* Get address of node's create function */
+		if (!status) {
+			hnode->loaded = true;
+			if (node_type != NODE_DEVICE) {
+				status = get_fxn_address(hnode, &ul_create_fxn,
+							 CREATEPHASE);
+			}
+		} else {
+			pr_err("%s: failed to load create code: 0x%x\n",
+			       __func__, status);
+		}
+		/* Request the lowest OPP level */
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+		if (pdata->cpu_set_freq)
+			(*pdata->cpu_set_freq) (pdata->mpu_speed[VDD1_OPP1]);
+#endif
+		/* Get address of iAlg functions, if socket node */
+		if (!status) {
+			if (node_type == NODE_DAISSOCKET) {
+				status = hnode_mgr->nldr_fxns.pfn_get_fxn_addr
+				    (hnode->nldr_node_obj,
+				     hnode->dcd_props.obj_data.node_obj.
+				     pstr_i_alg_name,
+				     &hnode->create_args.asa.
+				     task_arg_obj.ul_dais_arg);
+			}
+		}
+	}
+	if (!status) {
+		if (node_type != NODE_DEVICE) {
+			status = disp_node_create(hnode_mgr->disp_obj, hnode,
+						  hnode_mgr->ul_fxn_addrs
+						  [RMSCREATENODE],
+						  ul_create_fxn,
+						  &(hnode->create_args),
+						  &(hnode->node_env));
+			if (status >= 0) {
+				/* Set the message queue id to the node env
+				 * pointer */
+				intf_fxns = hnode_mgr->intf_fxns;
+				(*intf_fxns->pfn_msg_set_queue_id) (hnode->
+							msg_queue_obj,
+							hnode->node_env);
+			}
+		}
+	}
+	/*  Phase II/Overlays: Create, execute, delete phases  possibly in
+	 *  different files/sections. */
+	if (hnode->loaded && hnode->phase_split) {
+		/* If create code was dynamically loaded, we can now unload
+		 * it. */
+		status1 = hnode_mgr->nldr_fxns.pfn_unload(hnode->nldr_node_obj,
+							  NLDR_CREATE);
+		hnode->loaded = false;
+	}
+	if (status1)
+		pr_err("%s: Failed to unload create code: 0x%x\n",
+		       __func__, status1);
+func_cont2:
+	/* Update node state and node manager state */
+	if (status >= 0) {
+		NODE_SET_STATE(hnode, NODE_CREATED);
+		hnode_mgr->num_created++;
+		goto func_cont;
+	}
+	if (status != -EBADR) {
+		/* Put back in NODE_ALLOCATED state if error occurred */
+		NODE_SET_STATE(hnode, NODE_ALLOCATED);
+	}
+func_cont:
+	/* Free access to node dispatcher */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+func_end:
+	if (status >= 0) {
+		proc_notify_clients(hnode->hprocessor, DSP_NODESTATECHANGE);
+		ntfy_notify(hnode->ntfy_obj, DSP_NODESTATECHANGE);
+	}
+
+	dev_dbg(bridge, "%s: hnode: %p status: 0x%x\n", __func__,
+		hnode, status);
+	return status;
+}
+
+/*
+ *  ======== node_create_mgr ========
+ *  Purpose:
+ *      Create a NODE Manager object.
+ */
+int node_create_mgr(struct node_mgr **node_man,
+			   struct dev_object *hdev_obj)
+{
+	u32 i;
+	struct node_mgr *node_mgr_obj = NULL;
+	struct disp_attr disp_attr_obj;
+	char *sz_zl_file = "";
+	struct nldr_attrs nldr_attrs_obj;
+	int status = 0;
+	u8 dev_type;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(node_man != NULL);
+	DBC_REQUIRE(hdev_obj != NULL);
+
+	*node_man = NULL;
+	/* Allocate Node manager object */
+	node_mgr_obj = kzalloc(sizeof(struct node_mgr), GFP_KERNEL);
+	if (node_mgr_obj) {
+		node_mgr_obj->hdev_obj = hdev_obj;
+		node_mgr_obj->node_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		node_mgr_obj->pipe_map = gb_create(MAXPIPES);
+		node_mgr_obj->pipe_done_map = gb_create(MAXPIPES);
+		if (node_mgr_obj->node_list == NULL
+		    || node_mgr_obj->pipe_map == NULL
+		    || node_mgr_obj->pipe_done_map == NULL) {
+			status = -ENOMEM;
+		} else {
+			INIT_LIST_HEAD(&node_mgr_obj->node_list->head);
+			node_mgr_obj->ntfy_obj = kmalloc(
+				sizeof(struct ntfy_object), GFP_KERNEL);
+			if (node_mgr_obj->ntfy_obj)
+				ntfy_init(node_mgr_obj->ntfy_obj);
+			else
+				status = -ENOMEM;
+		}
+		node_mgr_obj->num_created = 0;
+	} else {
+		status = -ENOMEM;
+	}
+	/* get devNodeType */
+	if (!status)
+		status = dev_get_dev_type(hdev_obj, &dev_type);
+
+	/* Create the DCD Manager */
+	if (!status) {
+		status =
+		    dcd_create_manager(sz_zl_file, &node_mgr_obj->hdcd_mgr);
+		if (!status)
+			status = get_proc_props(node_mgr_obj, hdev_obj);
+
+	}
+	/* Create NODE Dispatcher */
+	if (!status) {
+		disp_attr_obj.ul_chnl_offset = node_mgr_obj->ul_chnl_offset;
+		disp_attr_obj.ul_chnl_buf_size = node_mgr_obj->ul_chnl_buf_size;
+		disp_attr_obj.proc_family = node_mgr_obj->proc_family;
+		disp_attr_obj.proc_type = node_mgr_obj->proc_type;
+		status =
+		    disp_create(&node_mgr_obj->disp_obj, hdev_obj,
+				&disp_attr_obj);
+	}
+	/* Create a STRM Manager */
+	if (!status)
+		status = strm_create(&node_mgr_obj->strm_mgr_obj, hdev_obj);
+
+	if (!status) {
+		dev_get_intf_fxns(hdev_obj, &node_mgr_obj->intf_fxns);
+		/* Get msg_ctrl queue manager */
+		dev_get_msg_mgr(hdev_obj, &node_mgr_obj->msg_mgr_obj);
+		mutex_init(&node_mgr_obj->node_mgr_lock);
+		node_mgr_obj->chnl_map = gb_create(node_mgr_obj->ul_num_chnls);
+		/* dma chnl map. ul_num_chnls is # per transport */
+		node_mgr_obj->dma_chnl_map =
+		    gb_create(node_mgr_obj->ul_num_chnls);
+		node_mgr_obj->zc_chnl_map =
+		    gb_create(node_mgr_obj->ul_num_chnls);
+		if ((node_mgr_obj->chnl_map == NULL)
+		    || (node_mgr_obj->dma_chnl_map == NULL)
+		    || (node_mgr_obj->zc_chnl_map == NULL)) {
+			status = -ENOMEM;
+		} else {
+			/* Block out reserved channels */
+			for (i = 0; i < node_mgr_obj->ul_chnl_offset; i++)
+				gb_set(node_mgr_obj->chnl_map, i);
+
+			/* Block out channels reserved for RMS */
+			gb_set(node_mgr_obj->chnl_map,
+			       node_mgr_obj->ul_chnl_offset);
+			gb_set(node_mgr_obj->chnl_map,
+			       node_mgr_obj->ul_chnl_offset + 1);
+		}
+	}
+	if (!status) {
+		/* NO RM Server on the IVA */
+		if (dev_type != IVA_UNIT) {
+			/* Get addresses of any RMS functions loaded */
+			status = get_rms_fxns(node_mgr_obj);
+		}
+	}
+
+	/* Get loader functions and create loader */
+	if (!status)
+		node_mgr_obj->nldr_fxns = nldr_fxns;	/* Dyn loader funcs */
+
+	if (!status) {
+		nldr_attrs_obj.pfn_ovly = ovly;
+		nldr_attrs_obj.pfn_write = mem_write;
+		nldr_attrs_obj.us_dsp_word_size = node_mgr_obj->udsp_word_size;
+		nldr_attrs_obj.us_dsp_mau_size = node_mgr_obj->udsp_mau_size;
+		node_mgr_obj->loader_init = node_mgr_obj->nldr_fxns.pfn_init();
+		status =
+		    node_mgr_obj->nldr_fxns.pfn_create(&node_mgr_obj->nldr_obj,
+						       hdev_obj,
+						       &nldr_attrs_obj);
+	}
+	if (!status)
+		*node_man = node_mgr_obj;
+	else
+		delete_node_mgr(node_mgr_obj);
+
+	DBC_ENSURE((status && *node_man == NULL) || (!status && *node_man));
+
+	return status;
+}
+
+/*
+ *  ======== node_delete ========
+ *  Purpose:
+ *      Delete a node on the DSP by remotely calling the node's delete function.
+ *      Loads the node's delete function if necessary. Free GPP side resources
+ *      after node's delete function returns.
+ */
+int node_delete(struct node_res_object *noderes,
+		       struct process_context *pr_ctxt)
+{
+	struct node_object *pnode = noderes->hnode;
+	struct node_mgr *hnode_mgr;
+	struct proc_object *hprocessor;
+	struct disp_object *disp_obj;
+	u32 ul_delete_fxn;
+	enum node_type node_type;
+	enum node_state state;
+	int status = 0;
+	int status1 = 0;
+	struct dsp_cbdata cb_data;
+	u32 proc_id;
+	struct bridge_drv_interface *intf_fxns;
+
+	void *node_res = noderes;
+
+	struct dsp_processorstate proc_state;
+	DBC_REQUIRE(refs > 0);
+
+	if (!pnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* create struct dsp_cbdata struct for PWR call */
+	cb_data.cb_data = PWR_TIMEOUT;
+	hnode_mgr = pnode->hnode_mgr;
+	hprocessor = pnode->hprocessor;
+	disp_obj = hnode_mgr->disp_obj;
+	node_type = node_get_type(pnode);
+	intf_fxns = hnode_mgr->intf_fxns;
+	/* Enter critical section */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	state = node_get_state(pnode);
+	/*  Execute delete phase code for non-device node in all cases
+	 *  except when the node was only allocated. Delete phase must be
+	 *  executed even if create phase was executed, but failed.
+	 *  If the node environment pointer is non-NULL, the delete phase
+	 *  code must be  executed. */
+	if (!(state == NODE_ALLOCATED && pnode->node_env == (u32) NULL) &&
+	    node_type != NODE_DEVICE) {
+		status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+		if (status)
+			goto func_cont1;
+
+		if (proc_id == DSP_UNIT || proc_id == IVA_UNIT) {
+			/*  If node has terminated, execute phase code will
+			 *  have already been unloaded in node_on_exit(). If the
+			 *  node is PAUSED, the execute phase is loaded, and it
+			 *  is now ok to unload it. If the node is running, we
+			 *  will unload the execute phase only after deleting
+			 *  the node. */
+			if (state == NODE_PAUSED && pnode->loaded &&
+			    pnode->phase_split) {
+				/* Ok to unload execute code as long as node
+				 * is not * running */
+				status1 =
+				    hnode_mgr->nldr_fxns.
+				    pfn_unload(pnode->nldr_node_obj,
+					       NLDR_EXECUTE);
+				pnode->loaded = false;
+				NODE_SET_STATE(pnode, NODE_DONE);
+			}
+			/* Load delete phase code if not loaded or if haven't
+			 * * unloaded EXECUTE phase */
+			if ((!(pnode->loaded) || (state == NODE_RUNNING)) &&
+			    pnode->phase_split) {
+				status =
+				    hnode_mgr->nldr_fxns.
+				    pfn_load(pnode->nldr_node_obj, NLDR_DELETE);
+				if (!status)
+					pnode->loaded = true;
+				else
+					pr_err("%s: fail - load delete code:"
+					       " 0x%x\n", __func__, status);
+			}
+		}
+func_cont1:
+		if (!status) {
+			/* Unblock a thread trying to terminate the node */
+			(void)sync_set_event(pnode->sync_done);
+			if (proc_id == DSP_UNIT) {
+				/* ul_delete_fxn = address of node's delete
+				 * function */
+				status = get_fxn_address(pnode, &ul_delete_fxn,
+							 DELETEPHASE);
+			} else if (proc_id == IVA_UNIT)
+				ul_delete_fxn = (u32) pnode->node_env;
+			if (!status) {
+				status = proc_get_state(hprocessor,
+						&proc_state,
+						sizeof(struct
+						       dsp_processorstate));
+				if (proc_state.proc_state != PROC_ERROR) {
+					status =
+					    disp_node_delete(disp_obj, pnode,
+							     hnode_mgr->
+							     ul_fxn_addrs
+							     [RMSDELETENODE],
+							     ul_delete_fxn,
+							     pnode->node_env);
+				} else
+					NODE_SET_STATE(pnode, NODE_DONE);
+
+				/* Unload execute, if not unloaded, and delete
+				 * function */
+				if (state == NODE_RUNNING &&
+				    pnode->phase_split) {
+					status1 =
+					    hnode_mgr->nldr_fxns.
+					    pfn_unload(pnode->nldr_node_obj,
+						       NLDR_EXECUTE);
+				}
+				if (status1)
+					pr_err("%s: fail - unload execute code:"
+					       " 0x%x\n", __func__, status1);
+
+				status1 =
+				    hnode_mgr->nldr_fxns.pfn_unload(pnode->
+							    nldr_node_obj,
+							    NLDR_DELETE);
+				pnode->loaded = false;
+				if (status1)
+					pr_err("%s: fail - unload delete code: "
+					       "0x%x\n", __func__, status1);
+			}
+		}
+	}
+	/* Free host side resources even if a failure occurred */
+	/* Remove node from hnode_mgr->node_list */
+	lst_remove_elem(hnode_mgr->node_list, (struct list_head *)pnode);
+	hnode_mgr->num_nodes--;
+	/* Decrement count of nodes created on DSP */
+	if ((state != NODE_ALLOCATED) || ((state == NODE_ALLOCATED) &&
+					  (pnode->node_env != (u32) NULL)))
+		hnode_mgr->num_created--;
+	/*  Free host-side resources allocated by node_create()
+	 *  delete_node() fails if SM buffers not freed by client! */
+	drv_proc_node_update_status(node_res, false);
+	delete_node(pnode, pr_ctxt);
+
+	/*
+	 * Release all Node resources and its context
+	 */
+	idr_remove(pr_ctxt->node_id, ((struct node_res_object *)node_res)->id);
+	kfree(node_res);
+
+	/* Exit critical section */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+	proc_notify_clients(hprocessor, DSP_NODESTATECHANGE);
+func_end:
+	dev_dbg(bridge, "%s: pnode: %p status 0x%x\n", __func__, pnode, status);
+	return status;
+}
+
+/*
+ *  ======== node_delete_mgr ========
+ *  Purpose:
+ *      Delete the NODE Manager.
+ */
+int node_delete_mgr(struct node_mgr *hnode_mgr)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (hnode_mgr)
+		delete_node_mgr(hnode_mgr);
+	else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== node_enum_nodes ========
+ *  Purpose:
+ *      Enumerate currently allocated nodes.
+ */
+int node_enum_nodes(struct node_mgr *hnode_mgr, void **node_tab,
+			   u32 node_tab_size, u32 *pu_num_nodes,
+			   u32 *pu_allocated)
+{
+	struct node_object *hnode;
+	u32 i;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(node_tab != NULL || node_tab_size == 0);
+	DBC_REQUIRE(pu_num_nodes != NULL);
+	DBC_REQUIRE(pu_allocated != NULL);
+
+	if (!hnode_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* Enter critical section */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	if (hnode_mgr->num_nodes > node_tab_size) {
+		*pu_allocated = hnode_mgr->num_nodes;
+		*pu_num_nodes = 0;
+		status = -EINVAL;
+	} else {
+		hnode = (struct node_object *)lst_first(hnode_mgr->
+			node_list);
+		for (i = 0; i < hnode_mgr->num_nodes; i++) {
+			DBC_ASSERT(hnode);
+			node_tab[i] = hnode;
+			hnode = (struct node_object *)lst_next
+				(hnode_mgr->node_list,
+				(struct list_head *)hnode);
+		}
+		*pu_allocated = *pu_num_nodes = hnode_mgr->num_nodes;
+	}
+	/* end of sync_enter_cs */
+	/* Exit critical section */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== node_exit ========
+ *  Purpose:
+ *      Discontinue usage of NODE module.
+ */
+void node_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== node_free_msg_buf ========
+ *  Purpose:
+ *      Frees the message buffer.
+ */
+int node_free_msg_buf(struct node_object *hnode, u8 * pbuffer,
+			     struct dsp_bufferattr *pattr)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	int status = 0;
+	u32 proc_id;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pbuffer != NULL);
+	DBC_REQUIRE(pnode != NULL);
+	DBC_REQUIRE(pnode->xlator != NULL);
+
+	if (!hnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+	if (proc_id == DSP_UNIT) {
+		if (!status) {
+			if (pattr == NULL) {
+				/* set defaults */
+				pattr = &node_dfltbufattrs;
+			}
+			/* Node supports single SM segment only */
+			if (pattr->segment_id != 1)
+				status = -EBADR;
+
+			/* pbuffer is clients Va. */
+			status = cmm_xlator_free_buf(pnode->xlator, pbuffer);
+		}
+	} else {
+		DBC_ASSERT(NULL);	/* BUG */
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== node_get_attr ========
+ *  Purpose:
+ *      Copy the current attributes of the specified node into a dsp_nodeattr
+ *      structure.
+ */
+int node_get_attr(struct node_object *hnode,
+			 struct dsp_nodeattr *pattr, u32 attr_size)
+{
+	struct node_mgr *hnode_mgr;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pattr != NULL);
+	DBC_REQUIRE(attr_size >= sizeof(struct dsp_nodeattr));
+
+	if (!hnode) {
+		status = -EFAULT;
+	} else {
+		hnode_mgr = hnode->hnode_mgr;
+		/* Enter hnode_mgr critical section (since we're accessing
+		 * data that could be changed by node_change_priority() and
+		 * node_connect(). */
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+		pattr->cb_struct = sizeof(struct dsp_nodeattr);
+		/* dsp_nodeattrin */
+		pattr->in_node_attr_in.cb_struct =
+				 sizeof(struct dsp_nodeattrin);
+		pattr->in_node_attr_in.prio = hnode->prio;
+		pattr->in_node_attr_in.utimeout = hnode->utimeout;
+		pattr->in_node_attr_in.heap_size =
+			hnode->create_args.asa.task_arg_obj.heap_size;
+		pattr->in_node_attr_in.pgpp_virt_addr = (void *)
+			hnode->create_args.asa.task_arg_obj.ugpp_heap_addr;
+		pattr->node_attr_inputs = hnode->num_gpp_inputs;
+		pattr->node_attr_outputs = hnode->num_gpp_outputs;
+		/* dsp_nodeinfo */
+		get_node_info(hnode, &(pattr->node_info));
+		/* end of sync_enter_cs */
+		/* Exit critical section */
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+	}
+	return status;
+}
+
+/*
+ *  ======== node_get_channel_id ========
+ *  Purpose:
+ *      Get the channel index reserved for a stream connection between the
+ *      host and a node.
+ */
+int node_get_channel_id(struct node_object *hnode, u32 dir, u32 index,
+			       u32 *chan_id)
+{
+	enum node_type node_type;
+	int status = -EINVAL;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dir == DSP_TONODE || dir == DSP_FROMNODE);
+	DBC_REQUIRE(chan_id != NULL);
+
+	if (!hnode) {
+		status = -EFAULT;
+		return status;
+	}
+	node_type = node_get_type(hnode);
+	if (node_type != NODE_TASK && node_type != NODE_DAISSOCKET) {
+		status = -EPERM;
+		return status;
+	}
+	if (dir == DSP_TONODE) {
+		if (index < MAX_INPUTS(hnode)) {
+			if (hnode->inputs[index].type == HOSTCONNECT) {
+				*chan_id = hnode->inputs[index].dev_id;
+				status = 0;
+			}
+		}
+	} else {
+		DBC_ASSERT(dir == DSP_FROMNODE);
+		if (index < MAX_OUTPUTS(hnode)) {
+			if (hnode->outputs[index].type == HOSTCONNECT) {
+				*chan_id = hnode->outputs[index].dev_id;
+				status = 0;
+			}
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== node_get_message ========
+ *  Purpose:
+ *      Retrieve a message from a node on the DSP.
+ */
+int node_get_message(struct node_object *hnode,
+			    struct dsp_msg *message, u32 utimeout)
+{
+	struct node_mgr *hnode_mgr;
+	enum node_type node_type;
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+	void *tmp_buf;
+	struct dsp_processorstate proc_state;
+	struct proc_object *hprocessor;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(message != NULL);
+
+	if (!hnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hprocessor = hnode->hprocessor;
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in error state then don't attempt to get the
+	   message */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+	hnode_mgr = hnode->hnode_mgr;
+	node_type = node_get_type(hnode);
+	if (node_type != NODE_MESSAGE && node_type != NODE_TASK &&
+	    node_type != NODE_DAISSOCKET) {
+		status = -EPERM;
+		goto func_end;
+	}
+	/*  This function will block unless a message is available. Since
+	 *  DSPNode_RegisterNotify() allows notification when a message
+	 *  is available, the system can be designed so that
+	 *  DSPNode_GetMessage() is only called when a message is
+	 *  available. */
+	intf_fxns = hnode_mgr->intf_fxns;
+	status =
+	    (*intf_fxns->pfn_msg_get) (hnode->msg_queue_obj, message, utimeout);
+	/* Check if message contains SM descriptor */
+	if (status || !(message->dw_cmd & DSP_RMSBUFDESC))
+		goto func_end;
+
+	/* Translate DSP byte addr to GPP Va. */
+	tmp_buf = cmm_xlator_translate(hnode->xlator,
+				       (void *)(message->dw_arg1 *
+						hnode->hnode_mgr->
+						udsp_word_size), CMM_DSPPA2PA);
+	if (tmp_buf != NULL) {
+		/* now convert this GPP Pa to Va */
+		tmp_buf = cmm_xlator_translate(hnode->xlator, tmp_buf,
+					       CMM_PA2VA);
+		if (tmp_buf != NULL) {
+			/* Adjust SM size in msg */
+			message->dw_arg1 = (u32) tmp_buf;
+			message->dw_arg2 *= hnode->hnode_mgr->udsp_word_size;
+		} else {
+			status = -ESRCH;
+		}
+	} else {
+		status = -ESRCH;
+	}
+func_end:
+	dev_dbg(bridge, "%s: hnode: %p message: %p utimeout: 0x%x\n", __func__,
+		hnode, message, utimeout);
+	return status;
+}
+
+/*
+ *   ======== node_get_nldr_obj ========
+ */
+int node_get_nldr_obj(struct node_mgr *hnode_mgr,
+			     struct nldr_object **nldr_ovlyobj)
+{
+	int status = 0;
+	struct node_mgr *node_mgr_obj = hnode_mgr;
+	DBC_REQUIRE(nldr_ovlyobj != NULL);
+
+	if (!hnode_mgr)
+		status = -EFAULT;
+	else
+		*nldr_ovlyobj = node_mgr_obj->nldr_obj;
+
+	DBC_ENSURE(!status || (nldr_ovlyobj != NULL && *nldr_ovlyobj == NULL));
+	return status;
+}
+
+/*
+ *  ======== node_get_strm_mgr ========
+ *  Purpose:
+ *      Returns the Stream manager.
+ */
+int node_get_strm_mgr(struct node_object *hnode,
+			     struct strm_mgr **strm_man)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!hnode)
+		status = -EFAULT;
+	else
+		*strm_man = hnode->hnode_mgr->strm_mgr_obj;
+
+	return status;
+}
+
+/*
+ *  ======== node_get_load_type ========
+ */
+enum nldr_loadtype node_get_load_type(struct node_object *hnode)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hnode);
+	if (!hnode) {
+		dev_dbg(bridge, "%s: Failed. hnode: %p\n", __func__, hnode);
+		return -1;
+	} else {
+		return hnode->dcd_props.obj_data.node_obj.us_load_type;
+	}
+}
+
+/*
+ *  ======== node_get_timeout ========
+ *  Purpose:
+ *      Returns the timeout value for this node.
+ */
+u32 node_get_timeout(struct node_object *hnode)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hnode);
+	if (!hnode) {
+		dev_dbg(bridge, "%s: failed. hnode: %p\n", __func__, hnode);
+		return 0;
+	} else {
+		return hnode->utimeout;
+	}
+}
+
+/*
+ *  ======== node_get_type ========
+ *  Purpose:
+ *      Returns the node type.
+ */
+enum node_type node_get_type(struct node_object *hnode)
+{
+	enum node_type node_type;
+
+	if (hnode == (struct node_object *)DSP_HGPPNODE)
+		node_type = NODE_GPP;
+	else {
+		if (!hnode)
+			node_type = -1;
+		else
+			node_type = hnode->ntype;
+	}
+	return node_type;
+}
+
+/*
+ *  ======== node_init ========
+ *  Purpose:
+ *      Initialize the NODE module.
+ */
+bool node_init(void)
+{
+	DBC_REQUIRE(refs >= 0);
+
+	refs++;
+
+	return true;
+}
+
+/*
+ *  ======== node_on_exit ========
+ *  Purpose:
+ *      Gets called when RMS_EXIT is received for a node.
+ */
+void node_on_exit(struct node_object *hnode, s32 node_status)
+{
+	if (!hnode)
+		return;
+
+	/* Set node state to done */
+	NODE_SET_STATE(hnode, NODE_DONE);
+	hnode->exit_status = node_status;
+	if (hnode->loaded && hnode->phase_split) {
+		(void)hnode->hnode_mgr->nldr_fxns.pfn_unload(hnode->
+							     nldr_node_obj,
+							     NLDR_EXECUTE);
+		hnode->loaded = false;
+	}
+	/* Unblock call to node_terminate */
+	(void)sync_set_event(hnode->sync_done);
+	/* Notify clients */
+	proc_notify_clients(hnode->hprocessor, DSP_NODESTATECHANGE);
+	ntfy_notify(hnode->ntfy_obj, DSP_NODESTATECHANGE);
+}
+
+/*
+ *  ======== node_pause ========
+ *  Purpose:
+ *      Suspend execution of a node currently running on the DSP.
+ */
+int node_pause(struct node_object *hnode)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	enum node_type node_type;
+	enum node_state state;
+	struct node_mgr *hnode_mgr;
+	int status = 0;
+	u32 proc_id;
+	struct dsp_processorstate proc_state;
+	struct proc_object *hprocessor;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!hnode) {
+		status = -EFAULT;
+	} else {
+		node_type = node_get_type(hnode);
+		if (node_type != NODE_TASK && node_type != NODE_DAISSOCKET)
+			status = -EPERM;
+	}
+	if (status)
+		goto func_end;
+
+	status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+
+	if (proc_id == IVA_UNIT)
+		status = -ENOSYS;
+
+	if (!status) {
+		hnode_mgr = hnode->hnode_mgr;
+
+		/* Enter critical section */
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+		state = node_get_state(hnode);
+		/* Check node state */
+		if (state != NODE_RUNNING)
+			status = -EBADR;
+
+		if (status)
+			goto func_cont;
+		hprocessor = hnode->hprocessor;
+		status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+		if (status)
+			goto func_cont;
+		/* If processor is in error state then don't attempt
+		   to send the message */
+		if (proc_state.proc_state == PROC_ERROR) {
+			status = -EPERM;
+			goto func_cont;
+		}
+
+		status = disp_node_change_priority(hnode_mgr->disp_obj, hnode,
+			hnode_mgr->ul_fxn_addrs[RMSCHANGENODEPRIORITY],
+			hnode->node_env, NODE_SUSPENDEDPRI);
+
+		/* Update state */
+		if (status >= 0)
+			NODE_SET_STATE(hnode, NODE_PAUSED);
+
+func_cont:
+		/* End of sync_enter_cs */
+		/* Leave critical section */
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+		if (status >= 0) {
+			proc_notify_clients(hnode->hprocessor,
+					    DSP_NODESTATECHANGE);
+			ntfy_notify(hnode->ntfy_obj, DSP_NODESTATECHANGE);
+		}
+	}
+func_end:
+	dev_dbg(bridge, "%s: hnode: %p status 0x%x\n", __func__, hnode, status);
+	return status;
+}
+
+/*
+ *  ======== node_put_message ========
+ *  Purpose:
+ *      Send a message to a message node, task node, or XDAIS socket node. This
+ *      function will block until the message stream can accommodate the
+ *      message, or a timeout occurs.
+ */
+int node_put_message(struct node_object *hnode,
+			    const struct dsp_msg *pmsg, u32 utimeout)
+{
+	struct node_mgr *hnode_mgr = NULL;
+	enum node_type node_type;
+	struct bridge_drv_interface *intf_fxns;
+	enum node_state state;
+	int status = 0;
+	void *tmp_buf;
+	struct dsp_msg new_msg;
+	struct dsp_processorstate proc_state;
+	struct proc_object *hprocessor;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pmsg != NULL);
+
+	if (!hnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hprocessor = hnode->hprocessor;
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in bad state then don't attempt sending the
+	   message */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+	hnode_mgr = hnode->hnode_mgr;
+	node_type = node_get_type(hnode);
+	if (node_type != NODE_MESSAGE && node_type != NODE_TASK &&
+	    node_type != NODE_DAISSOCKET)
+		status = -EPERM;
+
+	if (!status) {
+		/*  Check node state. Can't send messages to a node after
+		 *  we've sent the RMS_EXIT command. There is still the
+		 *  possibility that node_terminate can be called after we've
+		 *  checked the state. Could add another SYNC object to
+		 *  prevent this (can't use node_mgr_lock, since we don't
+		 *  want to block other NODE functions). However, the node may
+		 *  still exit on its own, before this message is sent. */
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+		state = node_get_state(hnode);
+		if (state == NODE_TERMINATING || state == NODE_DONE)
+			status = -EBADR;
+
+		/* end of sync_enter_cs */
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+	}
+	if (status)
+		goto func_end;
+
+	/* assign pmsg values to new msg */
+	new_msg = *pmsg;
+	/* Now, check if message contains a SM buffer descriptor */
+	if (pmsg->dw_cmd & DSP_RMSBUFDESC) {
+		/* Translate GPP Va to DSP physical buf Ptr. */
+		tmp_buf = cmm_xlator_translate(hnode->xlator,
+					       (void *)new_msg.dw_arg1,
+					       CMM_VA2DSPPA);
+		if (tmp_buf != NULL) {
+			/* got translation, convert to MAUs in msg */
+			if (hnode->hnode_mgr->udsp_word_size != 0) {
+				new_msg.dw_arg1 =
+				    (u32) tmp_buf /
+				    hnode->hnode_mgr->udsp_word_size;
+				/* MAUs */
+				new_msg.dw_arg2 /= hnode->hnode_mgr->
+				    udsp_word_size;
+			} else {
+				pr_err("%s: udsp_word_size is zero!\n",
+				       __func__);
+				status = -EPERM;	/* bad DSPWordSize */
+			}
+		} else {	/* failed to translate buffer address */
+			status = -ESRCH;
+		}
+	}
+	if (!status) {
+		intf_fxns = hnode_mgr->intf_fxns;
+		status = (*intf_fxns->pfn_msg_put) (hnode->msg_queue_obj,
+						    &new_msg, utimeout);
+	}
+func_end:
+	dev_dbg(bridge, "%s: hnode: %p pmsg: %p utimeout: 0x%x, "
+		"status 0x%x\n", __func__, hnode, pmsg, utimeout, status);
+	return status;
+}
+
+/*
+ *  ======== node_register_notify ========
+ *  Purpose:
+ *      Register to be notified on specific events for this node.
+ */
+int node_register_notify(struct node_object *hnode, u32 event_mask,
+				u32 notify_type,
+				struct dsp_notification *hnotification)
+{
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hnotification != NULL);
+
+	if (!hnode) {
+		status = -EFAULT;
+	} else {
+		/* Check if event mask is a valid node related event */
+		if (event_mask & ~(DSP_NODESTATECHANGE | DSP_NODEMESSAGEREADY))
+			status = -EINVAL;
+
+		/* Check if notify type is valid */
+		if (notify_type != DSP_SIGNALEVENT)
+			status = -EINVAL;
+
+		/* Only one Notification can be registered at a
+		 * time - Limitation */
+		if (event_mask == (DSP_NODESTATECHANGE | DSP_NODEMESSAGEREADY))
+			status = -EINVAL;
+	}
+	if (!status) {
+		if (event_mask == DSP_NODESTATECHANGE) {
+			status = ntfy_register(hnode->ntfy_obj, hnotification,
+					       event_mask & DSP_NODESTATECHANGE,
+					       notify_type);
+		} else {
+			/* Send Message part of event mask to msg_ctrl */
+			intf_fxns = hnode->hnode_mgr->intf_fxns;
+			status = (*intf_fxns->pfn_msg_register_notify)
+			    (hnode->msg_queue_obj,
+			     event_mask & DSP_NODEMESSAGEREADY, notify_type,
+			     hnotification);
+		}
+
+	}
+	dev_dbg(bridge, "%s: hnode: %p event_mask: 0x%x notify_type: 0x%x "
+		"hnotification: %p status 0x%x\n", __func__, hnode,
+		event_mask, notify_type, hnotification, status);
+	return status;
+}
+
+/*
+ *  ======== node_run ========
+ *  Purpose:
+ *      Start execution of a node's execute phase, or resume execution of a node
+ *      that has been suspended (via NODE_NodePause()) on the DSP. Load the
+ *      node's execute function if necessary.
+ */
+int node_run(struct node_object *hnode)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	struct node_mgr *hnode_mgr;
+	enum node_type node_type;
+	enum node_state state;
+	u32 ul_execute_fxn;
+	u32 ul_fxn_addr;
+	int status = 0;
+	u32 proc_id;
+	struct bridge_drv_interface *intf_fxns;
+	struct dsp_processorstate proc_state;
+	struct proc_object *hprocessor;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!hnode) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	hprocessor = hnode->hprocessor;
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in error state then don't attempt to run the node */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+	node_type = node_get_type(hnode);
+	if (node_type == NODE_DEVICE)
+		status = -EPERM;
+	if (status)
+		goto func_end;
+
+	hnode_mgr = hnode->hnode_mgr;
+	if (!hnode_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	intf_fxns = hnode_mgr->intf_fxns;
+	/* Enter critical section */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	state = node_get_state(hnode);
+	if (state != NODE_CREATED && state != NODE_PAUSED)
+		status = -EBADR;
+
+	if (!status)
+		status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+
+	if (status)
+		goto func_cont1;
+
+	if ((proc_id != DSP_UNIT) && (proc_id != IVA_UNIT))
+		goto func_cont1;
+
+	if (state == NODE_CREATED) {
+		/* If node's execute function is not loaded, load it */
+		if (!(hnode->loaded) && hnode->phase_split) {
+			status =
+			    hnode_mgr->nldr_fxns.pfn_load(hnode->nldr_node_obj,
+							  NLDR_EXECUTE);
+			if (!status) {
+				hnode->loaded = true;
+			} else {
+				pr_err("%s: fail - load execute code: 0x%x\n",
+				       __func__, status);
+			}
+		}
+		if (!status) {
+			/* Get address of node's execute function */
+			if (proc_id == IVA_UNIT)
+				ul_execute_fxn = (u32) hnode->node_env;
+			else {
+				status = get_fxn_address(hnode, &ul_execute_fxn,
+							 EXECUTEPHASE);
+			}
+		}
+		if (!status) {
+			ul_fxn_addr = hnode_mgr->ul_fxn_addrs[RMSEXECUTENODE];
+			status =
+			    disp_node_run(hnode_mgr->disp_obj, hnode,
+					  ul_fxn_addr, ul_execute_fxn,
+					  hnode->node_env);
+		}
+	} else if (state == NODE_PAUSED) {
+		ul_fxn_addr = hnode_mgr->ul_fxn_addrs[RMSCHANGENODEPRIORITY];
+		status = disp_node_change_priority(hnode_mgr->disp_obj, hnode,
+						   ul_fxn_addr, hnode->node_env,
+						   NODE_GET_PRIORITY(hnode));
+	} else {
+		/* We should never get here */
+		DBC_ASSERT(false);
+	}
+func_cont1:
+	/* Update node state. */
+	if (status >= 0)
+		NODE_SET_STATE(hnode, NODE_RUNNING);
+	else			/* Set state back to previous value */
+		NODE_SET_STATE(hnode, state);
+	/*End of sync_enter_cs */
+	/* Exit critical section */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+	if (status >= 0) {
+		proc_notify_clients(hnode->hprocessor, DSP_NODESTATECHANGE);
+		ntfy_notify(hnode->ntfy_obj, DSP_NODESTATECHANGE);
+	}
+func_end:
+	dev_dbg(bridge, "%s: hnode: %p status 0x%x\n", __func__, hnode, status);
+	return status;
+}
+
+/*
+ *  ======== node_terminate ========
+ *  Purpose:
+ *      Signal a node running on the DSP that it should exit its execute phase
+ *      function.
+ */
+int node_terminate(struct node_object *hnode, int *pstatus)
+{
+	struct node_object *pnode = (struct node_object *)hnode;
+	struct node_mgr *hnode_mgr = NULL;
+	enum node_type node_type;
+	struct bridge_drv_interface *intf_fxns;
+	enum node_state state;
+	struct dsp_msg msg, killmsg;
+	int status = 0;
+	u32 proc_id, kill_time_out;
+	struct deh_mgr *hdeh_mgr;
+	struct dsp_processorstate proc_state;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pstatus != NULL);
+
+	if (!hnode || !hnode->hnode_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	if (pnode->hprocessor == NULL) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	status = proc_get_processor_id(pnode->hprocessor, &proc_id);
+
+	if (!status) {
+		hnode_mgr = hnode->hnode_mgr;
+		node_type = node_get_type(hnode);
+		if (node_type != NODE_TASK && node_type != NODE_DAISSOCKET)
+			status = -EPERM;
+	}
+	if (!status) {
+		/* Check node state */
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+		state = node_get_state(hnode);
+		if (state != NODE_RUNNING) {
+			status = -EBADR;
+			/* Set the exit status if node terminated on
+			 * its own. */
+			if (state == NODE_DONE)
+				*pstatus = hnode->exit_status;
+
+		} else {
+			NODE_SET_STATE(hnode, NODE_TERMINATING);
+		}
+		/* end of sync_enter_cs */
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+	}
+	if (!status) {
+		/*
+		 *  Send exit message. Do not change state to NODE_DONE
+		 *  here. That will be done in callback.
+		 */
+		status = proc_get_state(pnode->hprocessor, &proc_state,
+					sizeof(struct dsp_processorstate));
+		if (status)
+			goto func_cont;
+		/* If processor is in error state then don't attempt to send
+		 * A kill task command */
+		if (proc_state.proc_state == PROC_ERROR) {
+			status = -EPERM;
+			goto func_cont;
+		}
+
+		msg.dw_cmd = RMS_EXIT;
+		msg.dw_arg1 = hnode->node_env;
+		killmsg.dw_cmd = RMS_KILLTASK;
+		killmsg.dw_arg1 = hnode->node_env;
+		intf_fxns = hnode_mgr->intf_fxns;
+
+		if (hnode->utimeout > MAXTIMEOUT)
+			kill_time_out = MAXTIMEOUT;
+		else
+			kill_time_out = (hnode->utimeout) * 2;
+
+		status = (*intf_fxns->pfn_msg_put) (hnode->msg_queue_obj, &msg,
+						    hnode->utimeout);
+		if (status)
+			goto func_cont;
+
+		/*
+		 * Wait on synchronization object that will be
+		 * posted in the callback on receiving RMS_EXIT
+		 * message, or by node_delete. Check for valid hnode,
+		 * in case posted by node_delete().
+		 */
+		status = sync_wait_on_event(hnode->sync_done,
+					    kill_time_out / 2);
+		if (status != ETIME)
+			goto func_cont;
+
+		status = (*intf_fxns->pfn_msg_put)(hnode->msg_queue_obj,
+						&killmsg, hnode->utimeout);
+		if (status)
+			goto func_cont;
+		status = sync_wait_on_event(hnode->sync_done,
+					     kill_time_out / 2);
+		if (status) {
+			/*
+			 * Here it goes the part of the simulation of
+			 * the DSP exception.
+			 */
+			dev_get_deh_mgr(hnode_mgr->hdev_obj, &hdeh_mgr);
+			if (!hdeh_mgr)
+				goto func_cont;
+
+			bridge_deh_notify(hdeh_mgr, DSP_SYSERROR, DSP_EXCEPTIONABORT);
+		}
+	}
+func_cont:
+	if (!status) {
+		/* Enter CS before getting exit status, in case node was
+		 * deleted. */
+		mutex_lock(&hnode_mgr->node_mgr_lock);
+		/* Make sure node wasn't deleted while we blocked */
+		if (!hnode) {
+			status = -EPERM;
+		} else {
+			*pstatus = hnode->exit_status;
+			dev_dbg(bridge, "%s: hnode: %p env 0x%x status 0x%x\n",
+				__func__, hnode, hnode->node_env, status);
+		}
+		mutex_unlock(&hnode_mgr->node_mgr_lock);
+	}			/*End of sync_enter_cs */
+func_end:
+	return status;
+}
+
+/*
+ *  ======== delete_node ========
+ *  Purpose:
+ *      Free GPP resources allocated in node_allocate() or node_connect().
+ */
+static void delete_node(struct node_object *hnode,
+			struct process_context *pr_ctxt)
+{
+	struct node_mgr *hnode_mgr;
+	struct cmm_xlatorobject *xlator;
+	struct bridge_drv_interface *intf_fxns;
+	u32 i;
+	enum node_type node_type;
+	struct stream_chnl stream;
+	struct node_msgargs node_msg_args;
+	struct node_taskargs task_arg_obj;
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object =
+	    (struct proc_object *)hnode->hprocessor;
+#endif
+	int status;
+	if (!hnode)
+		goto func_end;
+	hnode_mgr = hnode->hnode_mgr;
+	if (!hnode_mgr)
+		goto func_end;
+	xlator = hnode->xlator;
+	node_type = node_get_type(hnode);
+	if (node_type != NODE_DEVICE) {
+		node_msg_args = hnode->create_args.asa.node_msg_args;
+		kfree(node_msg_args.pdata);
+
+		/* Free msg_ctrl queue */
+		if (hnode->msg_queue_obj) {
+			intf_fxns = hnode_mgr->intf_fxns;
+			(*intf_fxns->pfn_msg_delete_queue) (hnode->
+							    msg_queue_obj);
+			hnode->msg_queue_obj = NULL;
+		}
+
+		kfree(hnode->sync_done);
+
+		/* Free all stream info */
+		if (hnode->inputs) {
+			for (i = 0; i < MAX_INPUTS(hnode); i++) {
+				stream = hnode->inputs[i];
+				free_stream(hnode_mgr, stream);
+			}
+			kfree(hnode->inputs);
+			hnode->inputs = NULL;
+		}
+		if (hnode->outputs) {
+			for (i = 0; i < MAX_OUTPUTS(hnode); i++) {
+				stream = hnode->outputs[i];
+				free_stream(hnode_mgr, stream);
+			}
+			kfree(hnode->outputs);
+			hnode->outputs = NULL;
+		}
+		task_arg_obj = hnode->create_args.asa.task_arg_obj;
+		if (task_arg_obj.strm_in_def) {
+			for (i = 0; i < MAX_INPUTS(hnode); i++) {
+				kfree(task_arg_obj.strm_in_def[i].sz_device);
+				task_arg_obj.strm_in_def[i].sz_device = NULL;
+			}
+			kfree(task_arg_obj.strm_in_def);
+			task_arg_obj.strm_in_def = NULL;
+		}
+		if (task_arg_obj.strm_out_def) {
+			for (i = 0; i < MAX_OUTPUTS(hnode); i++) {
+				kfree(task_arg_obj.strm_out_def[i].sz_device);
+				task_arg_obj.strm_out_def[i].sz_device = NULL;
+			}
+			kfree(task_arg_obj.strm_out_def);
+			task_arg_obj.strm_out_def = NULL;
+		}
+		if (task_arg_obj.udsp_heap_res_addr) {
+			status = proc_un_map(hnode->hprocessor, (void *)
+					     task_arg_obj.udsp_heap_addr,
+					     pr_ctxt);
+
+			status = proc_un_reserve_memory(hnode->hprocessor,
+							(void *)
+							task_arg_obj.
+							udsp_heap_res_addr,
+							pr_ctxt);
+#ifdef DSP_DMM_DEBUG
+			status = dmm_get_handle(p_proc_object, &dmm_mgr);
+			if (dmm_mgr)
+				dmm_mem_map_dump(dmm_mgr);
+			else
+				status = DSP_EHANDLE;
+#endif
+		}
+	}
+	if (node_type != NODE_MESSAGE) {
+		kfree(hnode->stream_connect);
+		hnode->stream_connect = NULL;
+	}
+	kfree(hnode->pstr_dev_name);
+	hnode->pstr_dev_name = NULL;
+
+	if (hnode->ntfy_obj) {
+		ntfy_delete(hnode->ntfy_obj);
+		kfree(hnode->ntfy_obj);
+		hnode->ntfy_obj = NULL;
+	}
+
+	/* These were allocated in dcd_get_object_def (via node_allocate) */
+	kfree(hnode->dcd_props.obj_data.node_obj.pstr_create_phase_fxn);
+	hnode->dcd_props.obj_data.node_obj.pstr_create_phase_fxn = NULL;
+
+	kfree(hnode->dcd_props.obj_data.node_obj.pstr_execute_phase_fxn);
+	hnode->dcd_props.obj_data.node_obj.pstr_execute_phase_fxn = NULL;
+
+	kfree(hnode->dcd_props.obj_data.node_obj.pstr_delete_phase_fxn);
+	hnode->dcd_props.obj_data.node_obj.pstr_delete_phase_fxn = NULL;
+
+	kfree(hnode->dcd_props.obj_data.node_obj.pstr_i_alg_name);
+	hnode->dcd_props.obj_data.node_obj.pstr_i_alg_name = NULL;
+
+	/* Free all SM address translator resources */
+	if (xlator) {
+		(void)cmm_xlator_delete(xlator, true);	/* force free */
+		xlator = NULL;
+	}
+
+	kfree(hnode->nldr_node_obj);
+	hnode->nldr_node_obj = NULL;
+	hnode->hnode_mgr = NULL;
+	kfree(hnode);
+	hnode = NULL;
+func_end:
+	return;
+}
+
+/*
+ *  ======== delete_node_mgr ========
+ *  Purpose:
+ *      Frees the node manager.
+ */
+static void delete_node_mgr(struct node_mgr *hnode_mgr)
+{
+	struct node_object *hnode;
+
+	if (hnode_mgr) {
+		/* Free resources */
+		if (hnode_mgr->hdcd_mgr)
+			dcd_destroy_manager(hnode_mgr->hdcd_mgr);
+
+		/* Remove any elements remaining in lists */
+		if (hnode_mgr->node_list) {
+			while ((hnode = (struct node_object *)
+				lst_get_head(hnode_mgr->node_list)))
+				delete_node(hnode, NULL);
+
+			DBC_ASSERT(LST_IS_EMPTY(hnode_mgr->node_list));
+			kfree(hnode_mgr->node_list);
+		}
+		mutex_destroy(&hnode_mgr->node_mgr_lock);
+		if (hnode_mgr->ntfy_obj) {
+			ntfy_delete(hnode_mgr->ntfy_obj);
+			kfree(hnode_mgr->ntfy_obj);
+		}
+
+		if (hnode_mgr->pipe_map)
+			gb_delete(hnode_mgr->pipe_map);
+
+		if (hnode_mgr->pipe_done_map)
+			gb_delete(hnode_mgr->pipe_done_map);
+
+		if (hnode_mgr->chnl_map)
+			gb_delete(hnode_mgr->chnl_map);
+
+		if (hnode_mgr->dma_chnl_map)
+			gb_delete(hnode_mgr->dma_chnl_map);
+
+		if (hnode_mgr->zc_chnl_map)
+			gb_delete(hnode_mgr->zc_chnl_map);
+
+		if (hnode_mgr->disp_obj)
+			disp_delete(hnode_mgr->disp_obj);
+
+		if (hnode_mgr->strm_mgr_obj)
+			strm_delete(hnode_mgr->strm_mgr_obj);
+
+		/* Delete the loader */
+		if (hnode_mgr->nldr_obj)
+			hnode_mgr->nldr_fxns.pfn_delete(hnode_mgr->nldr_obj);
+
+		if (hnode_mgr->loader_init)
+			hnode_mgr->nldr_fxns.pfn_exit();
+
+		kfree(hnode_mgr);
+	}
+}
+
+/*
+ *  ======== fill_stream_connect ========
+ *  Purpose:
+ *      Fills stream information.
+ */
+static void fill_stream_connect(struct node_object *node1,
+				struct node_object *node2,
+				u32 stream1, u32 stream2)
+{
+	u32 strm_index;
+	struct dsp_streamconnect *strm1 = NULL;
+	struct dsp_streamconnect *strm2 = NULL;
+	enum node_type node1_type = NODE_TASK;
+	enum node_type node2_type = NODE_TASK;
+
+	node1_type = node_get_type(node1);
+	node2_type = node_get_type(node2);
+	if (node1 != (struct node_object *)DSP_HGPPNODE) {
+
+		if (node1_type != NODE_DEVICE) {
+			strm_index = node1->num_inputs +
+			    node1->num_outputs - 1;
+			strm1 = &(node1->stream_connect[strm_index]);
+			strm1->cb_struct = sizeof(struct dsp_streamconnect);
+			strm1->this_node_stream_index = stream1;
+		}
+
+		if (node2 != (struct node_object *)DSP_HGPPNODE) {
+			/* NODE == > NODE */
+			if (node1_type != NODE_DEVICE) {
+				strm1->connected_node = node2;
+				strm1->ui_connected_node_id = node2->node_uuid;
+				strm1->connected_node_stream_index = stream2;
+				strm1->connect_type = CONNECTTYPE_NODEOUTPUT;
+			}
+			if (node2_type != NODE_DEVICE) {
+				strm_index = node2->num_inputs +
+				    node2->num_outputs - 1;
+				strm2 = &(node2->stream_connect[strm_index]);
+				strm2->cb_struct =
+				    sizeof(struct dsp_streamconnect);
+				strm2->this_node_stream_index = stream2;
+				strm2->connected_node = node1;
+				strm2->ui_connected_node_id = node1->node_uuid;
+				strm2->connected_node_stream_index = stream1;
+				strm2->connect_type = CONNECTTYPE_NODEINPUT;
+			}
+		} else if (node1_type != NODE_DEVICE)
+			strm1->connect_type = CONNECTTYPE_GPPOUTPUT;
+	} else {
+		/* GPP == > NODE */
+		DBC_ASSERT(node2 != (struct node_object *)DSP_HGPPNODE);
+		strm_index = node2->num_inputs + node2->num_outputs - 1;
+		strm2 = &(node2->stream_connect[strm_index]);
+		strm2->cb_struct = sizeof(struct dsp_streamconnect);
+		strm2->this_node_stream_index = stream2;
+		strm2->connect_type = CONNECTTYPE_GPPINPUT;
+	}
+}
+
+/*
+ *  ======== fill_stream_def ========
+ *  Purpose:
+ *      Fills Stream attributes.
+ */
+static void fill_stream_def(struct node_object *hnode,
+			    struct node_strmdef *pstrm_def,
+			    struct dsp_strmattr *pattrs)
+{
+	struct node_mgr *hnode_mgr = hnode->hnode_mgr;
+
+	if (pattrs != NULL) {
+		pstrm_def->num_bufs = pattrs->num_bufs;
+		pstrm_def->buf_size =
+		    pattrs->buf_size / hnode_mgr->udsp_data_mau_size;
+		pstrm_def->seg_id = pattrs->seg_id;
+		pstrm_def->buf_alignment = pattrs->buf_alignment;
+		pstrm_def->utimeout = pattrs->utimeout;
+	} else {
+		pstrm_def->num_bufs = DEFAULTNBUFS;
+		pstrm_def->buf_size =
+		    DEFAULTBUFSIZE / hnode_mgr->udsp_data_mau_size;
+		pstrm_def->seg_id = DEFAULTSEGID;
+		pstrm_def->buf_alignment = DEFAULTALIGNMENT;
+		pstrm_def->utimeout = DEFAULTTIMEOUT;
+	}
+}
+
+/*
+ *  ======== free_stream ========
+ *  Purpose:
+ *      Updates the channel mask and frees the pipe id.
+ */
+static void free_stream(struct node_mgr *hnode_mgr, struct stream_chnl stream)
+{
+	/* Free up the pipe id unless other node has not yet been deleted. */
+	if (stream.type == NODECONNECT) {
+		if (gb_test(hnode_mgr->pipe_done_map, stream.dev_id)) {
+			/* The other node has already been deleted */
+			gb_clear(hnode_mgr->pipe_done_map, stream.dev_id);
+			gb_clear(hnode_mgr->pipe_map, stream.dev_id);
+		} else {
+			/* The other node has not been deleted yet */
+			gb_set(hnode_mgr->pipe_done_map, stream.dev_id);
+		}
+	} else if (stream.type == HOSTCONNECT) {
+		if (stream.dev_id < hnode_mgr->ul_num_chnls) {
+			gb_clear(hnode_mgr->chnl_map, stream.dev_id);
+		} else if (stream.dev_id < (2 * hnode_mgr->ul_num_chnls)) {
+			/* dsp-dma */
+			gb_clear(hnode_mgr->dma_chnl_map, stream.dev_id -
+				 (1 * hnode_mgr->ul_num_chnls));
+		} else if (stream.dev_id < (3 * hnode_mgr->ul_num_chnls)) {
+			/* zero-copy */
+			gb_clear(hnode_mgr->zc_chnl_map, stream.dev_id -
+				 (2 * hnode_mgr->ul_num_chnls));
+		}
+	}
+}
+
+/*
+ *  ======== get_fxn_address ========
+ *  Purpose:
+ *      Retrieves the address for create, execute or delete phase for a node.
+ */
+static int get_fxn_address(struct node_object *hnode, u32 * fxn_addr,
+				  u32 phase)
+{
+	char *pstr_fxn_name = NULL;
+	struct node_mgr *hnode_mgr = hnode->hnode_mgr;
+	int status = 0;
+	DBC_REQUIRE(node_get_type(hnode) == NODE_TASK ||
+		    node_get_type(hnode) == NODE_DAISSOCKET ||
+		    node_get_type(hnode) == NODE_MESSAGE);
+
+	switch (phase) {
+	case CREATEPHASE:
+		pstr_fxn_name =
+		    hnode->dcd_props.obj_data.node_obj.pstr_create_phase_fxn;
+		break;
+	case EXECUTEPHASE:
+		pstr_fxn_name =
+		    hnode->dcd_props.obj_data.node_obj.pstr_execute_phase_fxn;
+		break;
+	case DELETEPHASE:
+		pstr_fxn_name =
+		    hnode->dcd_props.obj_data.node_obj.pstr_delete_phase_fxn;
+		break;
+	default:
+		/* Should never get here */
+		DBC_ASSERT(false);
+		break;
+	}
+
+	status =
+	    hnode_mgr->nldr_fxns.pfn_get_fxn_addr(hnode->nldr_node_obj,
+						  pstr_fxn_name, fxn_addr);
+
+	return status;
+}
+
+/*
+ *  ======== get_node_info ========
+ *  Purpose:
+ *      Retrieves the node information.
+ */
+void get_node_info(struct node_object *hnode, struct dsp_nodeinfo *node_info)
+{
+	u32 i;
+
+	DBC_REQUIRE(hnode);
+	DBC_REQUIRE(node_info != NULL);
+
+	node_info->cb_struct = sizeof(struct dsp_nodeinfo);
+	node_info->nb_node_database_props =
+	    hnode->dcd_props.obj_data.node_obj.ndb_props;
+	node_info->execution_priority = hnode->prio;
+	node_info->device_owner = hnode->device_owner;
+	node_info->number_streams = hnode->num_inputs + hnode->num_outputs;
+	node_info->node_env = hnode->node_env;
+
+	node_info->ns_execution_state = node_get_state(hnode);
+
+	/* Copy stream connect data */
+	for (i = 0; i < hnode->num_inputs + hnode->num_outputs; i++)
+		node_info->sc_stream_connection[i] = hnode->stream_connect[i];
+
+}
+
+/*
+ *  ======== get_node_props ========
+ *  Purpose:
+ *      Retrieve node properties.
+ */
+static int get_node_props(struct dcd_manager *hdcd_mgr,
+				 struct node_object *hnode,
+				 const struct dsp_uuid *node_uuid,
+				 struct dcd_genericobj *dcd_prop)
+{
+	u32 len;
+	struct node_msgargs *pmsg_args;
+	struct node_taskargs *task_arg_obj;
+	enum node_type node_type = NODE_TASK;
+	struct dsp_ndbprops *pndb_props =
+	    &(dcd_prop->obj_data.node_obj.ndb_props);
+	int status = 0;
+	char sz_uuid[MAXUUIDLEN];
+
+	status = dcd_get_object_def(hdcd_mgr, (struct dsp_uuid *)node_uuid,
+				    DSP_DCDNODETYPE, dcd_prop);
+
+	if (!status) {
+		hnode->ntype = node_type = pndb_props->ntype;
+
+		/* Create UUID value to set in registry. */
+		uuid_uuid_to_string((struct dsp_uuid *)node_uuid, sz_uuid,
+				    MAXUUIDLEN);
+		dev_dbg(bridge, "(node) UUID: %s\n", sz_uuid);
+
+		/* Fill in message args that come from NDB */
+		if (node_type != NODE_DEVICE) {
+			pmsg_args = &(hnode->create_args.asa.node_msg_args);
+			pmsg_args->seg_id =
+			    dcd_prop->obj_data.node_obj.msg_segid;
+			pmsg_args->notify_type =
+			    dcd_prop->obj_data.node_obj.msg_notify_type;
+			pmsg_args->max_msgs = pndb_props->message_depth;
+			dev_dbg(bridge, "(node) Max Number of Messages: 0x%x\n",
+				pmsg_args->max_msgs);
+		} else {
+			/* Copy device name */
+			DBC_REQUIRE(pndb_props->ac_name);
+			len = strlen(pndb_props->ac_name);
+			DBC_ASSERT(len < MAXDEVNAMELEN);
+			hnode->pstr_dev_name = kzalloc(len + 1, GFP_KERNEL);
+			if (hnode->pstr_dev_name == NULL) {
+				status = -ENOMEM;
+			} else {
+				strncpy(hnode->pstr_dev_name,
+					pndb_props->ac_name, len);
+			}
+		}
+	}
+	if (!status) {
+		/* Fill in create args that come from NDB */
+		if (node_type == NODE_TASK || node_type == NODE_DAISSOCKET) {
+			task_arg_obj = &(hnode->create_args.asa.task_arg_obj);
+			task_arg_obj->prio = pndb_props->prio;
+			task_arg_obj->stack_size = pndb_props->stack_size;
+			task_arg_obj->sys_stack_size =
+			    pndb_props->sys_stack_size;
+			task_arg_obj->stack_seg = pndb_props->stack_seg;
+			dev_dbg(bridge, "(node) Priority: 0x%x Stack Size: "
+				"0x%x words System Stack Size: 0x%x words "
+				"Stack Segment: 0x%x profile count : 0x%x\n",
+				task_arg_obj->prio, task_arg_obj->stack_size,
+				task_arg_obj->sys_stack_size,
+				task_arg_obj->stack_seg,
+				pndb_props->count_profiles);
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== get_proc_props ========
+ *  Purpose:
+ *      Retrieve the processor properties.
+ */
+static int get_proc_props(struct node_mgr *hnode_mgr,
+				 struct dev_object *hdev_obj)
+{
+	struct cfg_hostres *host_res;
+	struct bridge_dev_context *pbridge_context;
+	int status = 0;
+
+	status = dev_get_bridge_context(hdev_obj, &pbridge_context);
+	if (!pbridge_context)
+		status = -EFAULT;
+
+	if (!status) {
+		host_res = pbridge_context->resources;
+		if (!host_res)
+			return -EPERM;
+		hnode_mgr->ul_chnl_offset = host_res->dw_chnl_offset;
+		hnode_mgr->ul_chnl_buf_size = host_res->dw_chnl_buf_size;
+		hnode_mgr->ul_num_chnls = host_res->dw_num_chnls;
+
+		/*
+		 *  PROC will add an API to get dsp_processorinfo.
+		 *  Fill in default values for now.
+		 */
+		/* TODO -- Instead of hard coding, take from registry */
+		hnode_mgr->proc_family = 6000;
+		hnode_mgr->proc_type = 6410;
+		hnode_mgr->min_pri = DSP_NODE_MIN_PRIORITY;
+		hnode_mgr->max_pri = DSP_NODE_MAX_PRIORITY;
+		hnode_mgr->udsp_word_size = DSPWORDSIZE;
+		hnode_mgr->udsp_data_mau_size = DSPWORDSIZE;
+		hnode_mgr->udsp_mau_size = 1;
+
+	}
+	return status;
+}
+
+/*
+ *  ======== node_get_uuid_props ========
+ *  Purpose:
+ *      Fetch Node UUID properties from DCD/DOF file.
+ */
+int node_get_uuid_props(void *hprocessor,
+			       const struct dsp_uuid *node_uuid,
+			       struct dsp_ndbprops *node_props)
+{
+	struct node_mgr *hnode_mgr = NULL;
+	struct dev_object *hdev_obj;
+	int status = 0;
+	struct dcd_nodeprops dcd_node_props;
+	struct dsp_processorstate proc_state;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hprocessor != NULL);
+	DBC_REQUIRE(node_uuid != NULL);
+
+	if (hprocessor == NULL || node_uuid == NULL) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	status = proc_get_state(hprocessor, &proc_state,
+				sizeof(struct dsp_processorstate));
+	if (status)
+		goto func_end;
+	/* If processor is in error state then don't attempt
+	   to send the message */
+	if (proc_state.proc_state == PROC_ERROR) {
+		status = -EPERM;
+		goto func_end;
+	}
+
+	status = proc_get_dev_object(hprocessor, &hdev_obj);
+	if (hdev_obj) {
+		status = dev_get_node_manager(hdev_obj, &hnode_mgr);
+		if (hnode_mgr == NULL) {
+			status = -EFAULT;
+			goto func_end;
+		}
+	}
+
+	/*
+	 * Enter the critical section. This is needed because
+	 * dcd_get_object_def will ultimately end up calling dbll_open/close,
+	 * which needs to be protected in order to not corrupt the zlib manager
+	 * (COD).
+	 */
+	mutex_lock(&hnode_mgr->node_mgr_lock);
+
+	dcd_node_props.pstr_create_phase_fxn = NULL;
+	dcd_node_props.pstr_execute_phase_fxn = NULL;
+	dcd_node_props.pstr_delete_phase_fxn = NULL;
+	dcd_node_props.pstr_i_alg_name = NULL;
+
+	status = dcd_get_object_def(hnode_mgr->hdcd_mgr,
+		(struct dsp_uuid *)node_uuid, DSP_DCDNODETYPE,
+		(struct dcd_genericobj *)&dcd_node_props);
+
+	if (!status) {
+		*node_props = dcd_node_props.ndb_props;
+		kfree(dcd_node_props.pstr_create_phase_fxn);
+
+		kfree(dcd_node_props.pstr_execute_phase_fxn);
+
+		kfree(dcd_node_props.pstr_delete_phase_fxn);
+
+		kfree(dcd_node_props.pstr_i_alg_name);
+	}
+	/*  Leave the critical section, we're done. */
+	mutex_unlock(&hnode_mgr->node_mgr_lock);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== get_rms_fxns ========
+ *  Purpose:
+ *      Retrieve the RMS functions.
+ */
+static int get_rms_fxns(struct node_mgr *hnode_mgr)
+{
+	s32 i;
+	struct dev_object *dev_obj = hnode_mgr->hdev_obj;
+	int status = 0;
+
+	static char *psz_fxns[NUMRMSFXNS] = {
+		"RMS_queryServer",	/* RMSQUERYSERVER */
+		"RMS_configureServer",	/* RMSCONFIGURESERVER */
+		"RMS_createNode",	/* RMSCREATENODE */
+		"RMS_executeNode",	/* RMSEXECUTENODE */
+		"RMS_deleteNode",	/* RMSDELETENODE */
+		"RMS_changeNodePriority",	/* RMSCHANGENODEPRIORITY */
+		"RMS_readMemory",	/* RMSREADMEMORY */
+		"RMS_writeMemory",	/* RMSWRITEMEMORY */
+		"RMS_copy",	/* RMSCOPY */
+	};
+
+	for (i = 0; i < NUMRMSFXNS; i++) {
+		status = dev_get_symbol(dev_obj, psz_fxns[i],
+					&(hnode_mgr->ul_fxn_addrs[i]));
+		if (status) {
+			if (status == -ESPIPE) {
+				/*
+				 *  May be loaded dynamically (in the future),
+				 *  but return an error for now.
+				 */
+				dev_dbg(bridge, "%s: RMS function: %s currently"
+					" not loaded\n", __func__, psz_fxns[i]);
+			} else {
+				dev_dbg(bridge, "%s: Symbol not found: %s "
+					"status = 0x%x\n", __func__,
+					psz_fxns[i], status);
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== ovly ========
+ *  Purpose:
+ *      Called during overlay.Sends command to RMS to copy a block of data.
+ */
+static u32 ovly(void *priv_ref, u32 dsp_run_addr, u32 dsp_load_addr,
+		u32 ul_num_bytes, u32 mem_space)
+{
+	struct node_object *hnode = (struct node_object *)priv_ref;
+	struct node_mgr *hnode_mgr;
+	u32 ul_bytes = 0;
+	u32 ul_size;
+	u32 ul_timeout;
+	int status = 0;
+	struct bridge_dev_context *hbridge_context;
+	/* Function interface to Bridge driver*/
+	struct bridge_drv_interface *intf_fxns;
+
+	DBC_REQUIRE(hnode);
+
+	hnode_mgr = hnode->hnode_mgr;
+
+	ul_size = ul_num_bytes / hnode_mgr->udsp_word_size;
+	ul_timeout = hnode->utimeout;
+
+	/* Call new MemCopy function */
+	intf_fxns = hnode_mgr->intf_fxns;
+	status = dev_get_bridge_context(hnode_mgr->hdev_obj, &hbridge_context);
+	if (!status) {
+		status =
+		    (*intf_fxns->pfn_brd_mem_copy) (hbridge_context,
+						dsp_run_addr, dsp_load_addr,
+						ul_num_bytes, (u32) mem_space);
+		if (!status)
+			ul_bytes = ul_num_bytes;
+		else
+			pr_debug("%s: failed to copy brd memory, status 0x%x\n",
+				 __func__, status);
+	} else {
+		pr_debug("%s: failed to get Bridge context, status 0x%x\n",
+			 __func__, status);
+	}
+
+	return ul_bytes;
+}
+
+/*
+ *  ======== mem_write ========
+ */
+static u32 mem_write(void *priv_ref, u32 dsp_add, void *pbuf,
+		     u32 ul_num_bytes, u32 mem_space)
+{
+	struct node_object *hnode = (struct node_object *)priv_ref;
+	struct node_mgr *hnode_mgr;
+	u16 mem_sect_type;
+	u32 ul_timeout;
+	int status = 0;
+	struct bridge_dev_context *hbridge_context;
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+
+	DBC_REQUIRE(hnode);
+	DBC_REQUIRE(mem_space & DBLL_CODE || mem_space & DBLL_DATA);
+
+	hnode_mgr = hnode->hnode_mgr;
+
+	ul_timeout = hnode->utimeout;
+	mem_sect_type = (mem_space & DBLL_CODE) ? RMS_CODE : RMS_DATA;
+
+	/* Call new MemWrite function */
+	intf_fxns = hnode_mgr->intf_fxns;
+	status = dev_get_bridge_context(hnode_mgr->hdev_obj, &hbridge_context);
+	status = (*intf_fxns->pfn_brd_mem_write) (hbridge_context, pbuf,
+					dsp_add, ul_num_bytes, mem_sect_type);
+
+	return ul_num_bytes;
+}
+
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+/*
+ *  ======== node_find_addr ========
+ */
+int node_find_addr(struct node_mgr *node_mgr, u32 sym_addr,
+		u32 offset_range, void *sym_addr_output, char *sym_name)
+{
+	struct node_object *node_obj;
+	int status = -ENOENT;
+	u32 n;
+
+	pr_debug("%s(0x%x, 0x%x, 0x%x, 0x%x,  %s)\n", __func__,
+			(unsigned int) node_mgr,
+			sym_addr, offset_range,
+			(unsigned int) sym_addr_output, sym_name);
+
+	node_obj = (struct node_object *)(node_mgr->node_list->head.next);
+
+	for (n = 0; n < node_mgr->num_nodes; n++) {
+		status = nldr_find_addr(node_obj->nldr_node_obj, sym_addr,
+			offset_range, sym_addr_output, sym_name);
+
+		if (!status)
+			break;
+
+		node_obj = (struct node_object *) (node_obj->list_elem.next);
+	}
+
+	return status;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
new file mode 100644
index 00000000000..44c26e11fc4
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -0,0 +1,1936 @@
+/*
+ * proc.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Processor interface at the driver level.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+/* ------------------------------------ Host OS */
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/list.h>
+#include <dspbridge/ntfy.h>
+#include <dspbridge/sync.h>
+/*  ----------------------------------- Bridge Driver */
+#include <dspbridge/dspdefs.h>
+#include <dspbridge/dspdeh.h>
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/cod.h>
+#include <dspbridge/dev.h>
+#include <dspbridge/procpriv.h>
+#include <dspbridge/dmm.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/mgr.h>
+#include <dspbridge/node.h>
+#include <dspbridge/nldr.h>
+#include <dspbridge/rmm.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/dbdcd.h>
+#include <dspbridge/msg.h>
+#include <dspbridge/dspioctl.h>
+#include <dspbridge/drv.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/proc.h>
+#include <dspbridge/pwr.h>
+
+#include <dspbridge/resourcecleanup.h>
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define MAXCMDLINELEN       255
+#define PROC_ENVPROCID      "PROC_ID=%d"
+#define MAXPROCIDLEN	(8 + 5)
+#define PROC_DFLT_TIMEOUT   10000	/* Time out in milliseconds */
+#define PWR_TIMEOUT	 500	/* Sleep/wake timout in msec */
+#define EXTEND	      "_EXT_END"	/* Extmem end addr in DSP binary */
+
+#define DSP_CACHE_LINE 128
+
+#define BUFMODE_MASK	(3 << 14)
+
+/* Buffer modes from DSP perspective */
+#define RBUF		0x4000		/* Input buffer */
+#define WBUF		0x8000		/* Output Buffer */
+
+extern struct device *bridge;
+
+/*  ----------------------------------- Globals */
+
+/* The proc_object structure. */
+struct proc_object {
+	struct list_head link;	/* Link to next proc_object */
+	struct dev_object *hdev_obj;	/* Device this PROC represents */
+	u32 process;		/* Process owning this Processor */
+	struct mgr_object *hmgr_obj;	/* Manager Object Handle */
+	u32 attach_count;	/* Processor attach count */
+	u32 processor_id;	/* Processor number */
+	u32 utimeout;		/* Time out count */
+	enum dsp_procstate proc_state;	/* Processor state */
+	u32 ul_unit;		/* DDSP unit number */
+	bool is_already_attached;	/*
+					 * True if the Device below has
+					 * GPP Client attached
+					 */
+	struct ntfy_object *ntfy_obj;	/* Manages  notifications */
+	/* Bridge Context Handle */
+	struct bridge_dev_context *hbridge_context;
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+	char *psz_last_coff;
+	struct list_head proc_list;
+};
+
+static u32 refs;
+
+DEFINE_MUTEX(proc_lock);	/* For critical sections */
+
+/*  ----------------------------------- Function Prototypes */
+static int proc_monitor(struct proc_object *proc_obj);
+static s32 get_envp_count(char **envp);
+static char **prepend_envp(char **new_envp, char **envp, s32 envp_elems,
+			   s32 cnew_envp, char *sz_var);
+
+/* remember mapping information */
+static struct dmm_map_object *add_mapping_info(struct process_context *pr_ctxt,
+				u32 mpu_addr, u32 dsp_addr, u32 size)
+{
+	struct dmm_map_object *map_obj;
+
+	u32 num_usr_pgs = size / PG_SIZE4K;
+
+	pr_debug("%s: adding map info: mpu_addr 0x%x virt 0x%x size 0x%x\n",
+						__func__, mpu_addr,
+						dsp_addr, size);
+
+	map_obj = kzalloc(sizeof(struct dmm_map_object), GFP_KERNEL);
+	if (!map_obj) {
+		pr_err("%s: kzalloc failed\n", __func__);
+		return NULL;
+	}
+	INIT_LIST_HEAD(&map_obj->link);
+
+	map_obj->pages = kcalloc(num_usr_pgs, sizeof(struct page *),
+							GFP_KERNEL);
+	if (!map_obj->pages) {
+		pr_err("%s: kzalloc failed\n", __func__);
+		kfree(map_obj);
+		return NULL;
+	}
+
+	map_obj->mpu_addr = mpu_addr;
+	map_obj->dsp_addr = dsp_addr;
+	map_obj->size = size;
+	map_obj->num_usr_pgs = num_usr_pgs;
+
+	spin_lock(&pr_ctxt->dmm_map_lock);
+	list_add(&map_obj->link, &pr_ctxt->dmm_map_list);
+	spin_unlock(&pr_ctxt->dmm_map_lock);
+
+	return map_obj;
+}
+
+static int match_exact_map_obj(struct dmm_map_object *map_obj,
+					u32 dsp_addr, u32 size)
+{
+	if (map_obj->dsp_addr == dsp_addr && map_obj->size != size)
+		pr_err("%s: addr match (0x%x), size don't (0x%x != 0x%x)\n",
+				__func__, dsp_addr, map_obj->size, size);
+
+	return map_obj->dsp_addr == dsp_addr &&
+		map_obj->size == size;
+}
+
+static void remove_mapping_information(struct process_context *pr_ctxt,
+						u32 dsp_addr, u32 size)
+{
+	struct dmm_map_object *map_obj;
+
+	pr_debug("%s: looking for virt 0x%x size 0x%x\n", __func__,
+							dsp_addr, size);
+
+	spin_lock(&pr_ctxt->dmm_map_lock);
+	list_for_each_entry(map_obj, &pr_ctxt->dmm_map_list, link) {
+		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x size 0x%x\n",
+							__func__,
+							map_obj->mpu_addr,
+							map_obj->dsp_addr,
+							map_obj->size);
+
+		if (match_exact_map_obj(map_obj, dsp_addr, size)) {
+			pr_debug("%s: match, deleting map info\n", __func__);
+			list_del(&map_obj->link);
+			kfree(map_obj->dma_info.sg);
+			kfree(map_obj->pages);
+			kfree(map_obj);
+			goto out;
+		}
+		pr_debug("%s: candidate didn't match\n", __func__);
+	}
+
+	pr_err("%s: failed to find given map info\n", __func__);
+out:
+	spin_unlock(&pr_ctxt->dmm_map_lock);
+}
+
+static int match_containing_map_obj(struct dmm_map_object *map_obj,
+					u32 mpu_addr, u32 size)
+{
+	u32 map_obj_end = map_obj->mpu_addr + map_obj->size;
+
+	return mpu_addr >= map_obj->mpu_addr &&
+		mpu_addr + size <= map_obj_end;
+}
+
+static struct dmm_map_object *find_containing_mapping(
+				struct process_context *pr_ctxt,
+				u32 mpu_addr, u32 size)
+{
+	struct dmm_map_object *map_obj;
+	pr_debug("%s: looking for mpu_addr 0x%x size 0x%x\n", __func__,
+						mpu_addr, size);
+
+	spin_lock(&pr_ctxt->dmm_map_lock);
+	list_for_each_entry(map_obj, &pr_ctxt->dmm_map_list, link) {
+		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x size 0x%x\n",
+						__func__,
+						map_obj->mpu_addr,
+						map_obj->dsp_addr,
+						map_obj->size);
+		if (match_containing_map_obj(map_obj, mpu_addr, size)) {
+			pr_debug("%s: match!\n", __func__);
+			goto out;
+		}
+
+		pr_debug("%s: no match!\n", __func__);
+	}
+
+	map_obj = NULL;
+out:
+	spin_unlock(&pr_ctxt->dmm_map_lock);
+	return map_obj;
+}
+
+static int find_first_page_in_cache(struct dmm_map_object *map_obj,
+					unsigned long mpu_addr)
+{
+	u32 mapped_base_page = map_obj->mpu_addr >> PAGE_SHIFT;
+	u32 requested_base_page = mpu_addr >> PAGE_SHIFT;
+	int pg_index = requested_base_page - mapped_base_page;
+
+	if (pg_index < 0 || pg_index >= map_obj->num_usr_pgs) {
+		pr_err("%s: failed (got %d)\n", __func__, pg_index);
+		return -1;
+	}
+
+	pr_debug("%s: first page is %d\n", __func__, pg_index);
+	return pg_index;
+}
+
+static inline struct page *get_mapping_page(struct dmm_map_object *map_obj,
+								int pg_i)
+{
+	pr_debug("%s: looking for pg_i %d, num_usr_pgs: %d\n", __func__,
+					pg_i, map_obj->num_usr_pgs);
+
+	if (pg_i < 0 || pg_i >= map_obj->num_usr_pgs) {
+		pr_err("%s: requested pg_i %d is out of mapped range\n",
+				__func__, pg_i);
+		return NULL;
+	}
+
+	return map_obj->pages[pg_i];
+}
+
+/*
+ *  ======== proc_attach ========
+ *  Purpose:
+ *      Prepare for communication with a particular DSP processor, and return
+ *      a handle to the processor object.
+ */
+int
+proc_attach(u32 processor_id,
+	    const struct dsp_processorattrin *attr_in,
+	    void **ph_processor, struct process_context *pr_ctxt)
+{
+	int status = 0;
+	struct dev_object *hdev_obj;
+	struct proc_object *p_proc_object = NULL;
+	struct mgr_object *hmgr_obj = NULL;
+	struct drv_object *hdrv_obj = NULL;
+	u8 dev_type;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(ph_processor != NULL);
+
+	if (pr_ctxt->hprocessor) {
+		*ph_processor = pr_ctxt->hprocessor;
+		return status;
+	}
+
+	/* Get the Driver and Manager Object Handles */
+	status = cfg_get_object((u32 *) &hdrv_obj, REG_DRV_OBJECT);
+	if (!status)
+		status = cfg_get_object((u32 *) &hmgr_obj, REG_MGR_OBJECT);
+
+	if (!status) {
+		/* Get the Device Object */
+		status = drv_get_dev_object(processor_id, hdrv_obj, &hdev_obj);
+	}
+	if (!status)
+		status = dev_get_dev_type(hdev_obj, &dev_type);
+
+	if (status)
+		goto func_end;
+
+	/* If we made it this far, create the Proceesor object: */
+	p_proc_object = kzalloc(sizeof(struct proc_object), GFP_KERNEL);
+	/* Fill out the Processor Object: */
+	if (p_proc_object == NULL) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	p_proc_object->hdev_obj = hdev_obj;
+	p_proc_object->hmgr_obj = hmgr_obj;
+	p_proc_object->processor_id = dev_type;
+	/* Store TGID instead of process handle */
+	p_proc_object->process = current->tgid;
+
+	INIT_LIST_HEAD(&p_proc_object->proc_list);
+
+	if (attr_in)
+		p_proc_object->utimeout = attr_in->utimeout;
+	else
+		p_proc_object->utimeout = PROC_DFLT_TIMEOUT;
+
+	status = dev_get_intf_fxns(hdev_obj, &p_proc_object->intf_fxns);
+	if (!status) {
+		status = dev_get_bridge_context(hdev_obj,
+					     &p_proc_object->hbridge_context);
+		if (status)
+			kfree(p_proc_object);
+	} else
+		kfree(p_proc_object);
+
+	if (status)
+		goto func_end;
+
+	/* Create the Notification Object */
+	/* This is created with no event mask, no notify mask
+	 * and no valid handle to the notification. They all get
+	 * filled up when proc_register_notify is called */
+	p_proc_object->ntfy_obj = kmalloc(sizeof(struct ntfy_object),
+							GFP_KERNEL);
+	if (p_proc_object->ntfy_obj)
+		ntfy_init(p_proc_object->ntfy_obj);
+	else
+		status = -ENOMEM;
+
+	if (!status) {
+		/* Insert the Processor Object into the DEV List.
+		 * Return handle to this Processor Object:
+		 * Find out if the Device is already attached to a
+		 * Processor. If so, return AlreadyAttached status */
+		lst_init_elem(&p_proc_object->link);
+		status = dev_insert_proc_object(p_proc_object->hdev_obj,
+						(u32) p_proc_object,
+						&p_proc_object->
+						is_already_attached);
+		if (!status) {
+			if (p_proc_object->is_already_attached)
+				status = 0;
+		} else {
+			if (p_proc_object->ntfy_obj) {
+				ntfy_delete(p_proc_object->ntfy_obj);
+				kfree(p_proc_object->ntfy_obj);
+			}
+
+			kfree(p_proc_object);
+		}
+		if (!status) {
+			*ph_processor = (void *)p_proc_object;
+			pr_ctxt->hprocessor = *ph_processor;
+			(void)proc_notify_clients(p_proc_object,
+						  DSP_PROCESSORATTACH);
+		}
+	} else {
+		/* Don't leak memory if status is failed */
+		kfree(p_proc_object);
+	}
+func_end:
+	DBC_ENSURE((status == -EPERM && *ph_processor == NULL) ||
+		   (!status && p_proc_object) ||
+		   (status == 0 && p_proc_object));
+
+	return status;
+}
+
+static int get_exec_file(struct cfg_devnode *dev_node_obj,
+				struct dev_object *hdev_obj,
+				u32 size, char *exec_file)
+{
+	u8 dev_type;
+	s32 len;
+
+	dev_get_dev_type(hdev_obj, (u8 *) &dev_type);
+	if (dev_type == DSP_UNIT) {
+		return cfg_get_exec_file(dev_node_obj, size, exec_file);
+	} else if (dev_type == IVA_UNIT) {
+		if (iva_img) {
+			len = strlen(iva_img);
+			strncpy(exec_file, iva_img, len + 1);
+			return 0;
+		}
+	}
+	return -ENOENT;
+}
+
+/*
+ *  ======== proc_auto_start ======== =
+ *  Purpose:
+ *      A Particular device gets loaded with the default image
+ *      if the AutoStart flag is set.
+ *  Parameters:
+ *      hdev_obj:     Handle to the Device
+ *  Returns:
+ *      0:   On Successful Loading
+ *      -EPERM  General Failure
+ *  Requires:
+ *      hdev_obj != NULL
+ *  Ensures:
+ */
+int proc_auto_start(struct cfg_devnode *dev_node_obj,
+			   struct dev_object *hdev_obj)
+{
+	int status = -EPERM;
+	struct proc_object *p_proc_object;
+	char sz_exec_file[MAXCMDLINELEN];
+	char *argv[2];
+	struct mgr_object *hmgr_obj = NULL;
+	u8 dev_type;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dev_node_obj != NULL);
+	DBC_REQUIRE(hdev_obj != NULL);
+
+	/* Create a Dummy PROC Object */
+	status = cfg_get_object((u32 *) &hmgr_obj, REG_MGR_OBJECT);
+	if (status)
+		goto func_end;
+
+	p_proc_object = kzalloc(sizeof(struct proc_object), GFP_KERNEL);
+	if (p_proc_object == NULL) {
+		status = -ENOMEM;
+		goto func_end;
+	}
+	p_proc_object->hdev_obj = hdev_obj;
+	p_proc_object->hmgr_obj = hmgr_obj;
+	status = dev_get_intf_fxns(hdev_obj, &p_proc_object->intf_fxns);
+	if (!status)
+		status = dev_get_bridge_context(hdev_obj,
+					     &p_proc_object->hbridge_context);
+	if (status)
+		goto func_cont;
+
+	/* Stop the Device, put it into standby mode */
+	status = proc_stop(p_proc_object);
+
+	if (status)
+		goto func_cont;
+
+	/* Get the default executable for this board... */
+	dev_get_dev_type(hdev_obj, (u8 *) &dev_type);
+	p_proc_object->processor_id = dev_type;
+	status = get_exec_file(dev_node_obj, hdev_obj, sizeof(sz_exec_file),
+			       sz_exec_file);
+	if (!status) {
+		argv[0] = sz_exec_file;
+		argv[1] = NULL;
+		/* ...and try to load it: */
+		status = proc_load(p_proc_object, 1, (const char **)argv, NULL);
+		if (!status)
+			status = proc_start(p_proc_object);
+	}
+	kfree(p_proc_object->psz_last_coff);
+	p_proc_object->psz_last_coff = NULL;
+func_cont:
+	kfree(p_proc_object);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== proc_ctrl ========
+ *  Purpose:
+ *      Pass control information to the GPP device driver managing the
+ *      DSP processor.
+ *
+ *      This will be an OEM-only function, and not part of the DSP/BIOS Bridge
+ *      application developer's API.
+ *      Call the bridge_dev_ctrl fxn with the Argument. This is a Synchronous
+ *      Operation. arg can be null.
+ */
+int proc_ctrl(void *hprocessor, u32 dw_cmd, struct dsp_cbdata * arg)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = hprocessor;
+	u32 timeout = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (p_proc_object) {
+		/* intercept PWR deep sleep command */
+		if (dw_cmd == BRDIOCTL_DEEPSLEEP) {
+			timeout = arg->cb_data;
+			status = pwr_sleep_dsp(PWR_DEEPSLEEP, timeout);
+		}
+		/* intercept PWR emergency sleep command */
+		else if (dw_cmd == BRDIOCTL_EMERGENCYSLEEP) {
+			timeout = arg->cb_data;
+			status = pwr_sleep_dsp(PWR_EMERGENCYDEEPSLEEP, timeout);
+		} else if (dw_cmd == PWR_DEEPSLEEP) {
+			/* timeout = arg->cb_data; */
+			status = pwr_sleep_dsp(PWR_DEEPSLEEP, timeout);
+		}
+		/* intercept PWR wake commands */
+		else if (dw_cmd == BRDIOCTL_WAKEUP) {
+			timeout = arg->cb_data;
+			status = pwr_wake_dsp(timeout);
+		} else if (dw_cmd == PWR_WAKEUP) {
+			/* timeout = arg->cb_data; */
+			status = pwr_wake_dsp(timeout);
+		} else
+		    if (!((*p_proc_object->intf_fxns->pfn_dev_cntrl)
+				      (p_proc_object->hbridge_context, dw_cmd,
+				       arg))) {
+			status = 0;
+		} else {
+			status = -EPERM;
+		}
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== proc_detach ========
+ *  Purpose:
+ *      Destroys the  Processor Object. Removes the notification from the Dev
+ *      List.
+ */
+int proc_detach(struct process_context *pr_ctxt)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = NULL;
+
+	DBC_REQUIRE(refs > 0);
+
+	p_proc_object = (struct proc_object *)pr_ctxt->hprocessor;
+
+	if (p_proc_object) {
+		/* Notify the Client */
+		ntfy_notify(p_proc_object->ntfy_obj, DSP_PROCESSORDETACH);
+		/* Remove the notification memory */
+		if (p_proc_object->ntfy_obj) {
+			ntfy_delete(p_proc_object->ntfy_obj);
+			kfree(p_proc_object->ntfy_obj);
+		}
+
+		kfree(p_proc_object->psz_last_coff);
+		p_proc_object->psz_last_coff = NULL;
+		/* Remove the Proc from the DEV List */
+		(void)dev_remove_proc_object(p_proc_object->hdev_obj,
+					     (u32) p_proc_object);
+		/* Free the Processor Object */
+		kfree(p_proc_object);
+		pr_ctxt->hprocessor = NULL;
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== proc_enum_nodes ========
+ *  Purpose:
+ *      Enumerate and get configuration information about nodes allocated
+ *      on a DSP processor.
+ */
+int proc_enum_nodes(void *hprocessor, void **node_tab,
+			   u32 node_tab_size, u32 *pu_num_nodes,
+			   u32 *pu_allocated)
+{
+	int status = -EPERM;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct node_mgr *hnode_mgr = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(node_tab != NULL || node_tab_size == 0);
+	DBC_REQUIRE(pu_num_nodes != NULL);
+	DBC_REQUIRE(pu_allocated != NULL);
+
+	if (p_proc_object) {
+		if (!(dev_get_node_manager(p_proc_object->hdev_obj,
+						       &hnode_mgr))) {
+			if (hnode_mgr) {
+				status = node_enum_nodes(hnode_mgr, node_tab,
+							 node_tab_size,
+							 pu_num_nodes,
+							 pu_allocated);
+			}
+		}
+	} else {
+		status = -EFAULT;
+	}
+
+	return status;
+}
+
+/* Cache operation against kernel address instead of users */
+static int build_dma_sg(struct dmm_map_object *map_obj, unsigned long start,
+						ssize_t len, int pg_i)
+{
+	struct page *page;
+	unsigned long offset;
+	ssize_t rest;
+	int ret = 0, i = 0;
+	struct scatterlist *sg = map_obj->dma_info.sg;
+
+	while (len) {
+		page = get_mapping_page(map_obj, pg_i);
+		if (!page) {
+			pr_err("%s: no page for %08lx\n", __func__, start);
+			ret = -EINVAL;
+			goto out;
+		} else if (IS_ERR(page)) {
+			pr_err("%s: err page for %08lx(%lu)\n", __func__, start,
+			       PTR_ERR(page));
+			ret = PTR_ERR(page);
+			goto out;
+		}
+
+		offset = start & ~PAGE_MASK;
+		rest = min_t(ssize_t, PAGE_SIZE - offset, len);
+
+		sg_set_page(&sg[i], page, rest, offset);
+
+		len -= rest;
+		start += rest;
+		pg_i++, i++;
+	}
+
+	if (i != map_obj->dma_info.num_pages) {
+		pr_err("%s: bad number of sg iterations\n", __func__);
+		ret = -EFAULT;
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static int memory_regain_ownership(struct dmm_map_object *map_obj,
+		unsigned long start, ssize_t len, enum dma_data_direction dir)
+{
+	int ret = 0;
+	unsigned long first_data_page = start >> PAGE_SHIFT;
+	unsigned long last_data_page = ((u32)(start + len - 1) >> PAGE_SHIFT);
+	/* calculating the number of pages this area spans */
+	unsigned long num_pages = last_data_page - first_data_page + 1;
+	struct bridge_dma_map_info *dma_info = &map_obj->dma_info;
+
+	if (!dma_info->sg)
+		goto out;
+
+	if (dma_info->dir != dir || dma_info->num_pages != num_pages) {
+		pr_err("%s: dma info doesn't match given params\n", __func__);
+		return -EINVAL;
+	}
+
+	dma_unmap_sg(bridge, dma_info->sg, num_pages, dma_info->dir);
+
+	pr_debug("%s: dma_map_sg unmapped\n", __func__);
+
+	kfree(dma_info->sg);
+
+	map_obj->dma_info.sg = NULL;
+
+out:
+	return ret;
+}
+
+/* Cache operation against kernel address instead of users */
+static int memory_give_ownership(struct dmm_map_object *map_obj,
+		unsigned long start, ssize_t len, enum dma_data_direction dir)
+{
+	int pg_i, ret, sg_num;
+	struct scatterlist *sg;
+	unsigned long first_data_page = start >> PAGE_SHIFT;
+	unsigned long last_data_page = ((u32)(start + len - 1) >> PAGE_SHIFT);
+	/* calculating the number of pages this area spans */
+	unsigned long num_pages = last_data_page - first_data_page + 1;
+
+	pg_i = find_first_page_in_cache(map_obj, start);
+	if (pg_i < 0) {
+		pr_err("%s: failed to find first page in cache\n", __func__);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	sg = kcalloc(num_pages, sizeof(*sg), GFP_KERNEL);
+	if (!sg) {
+		pr_err("%s: kcalloc failed\n", __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	sg_init_table(sg, num_pages);
+
+	/* cleanup a previous sg allocation */
+	/* this may happen if application doesn't signal for e/o DMA */
+	kfree(map_obj->dma_info.sg);
+
+	map_obj->dma_info.sg = sg;
+	map_obj->dma_info.dir = dir;
+	map_obj->dma_info.num_pages = num_pages;
+
+	ret = build_dma_sg(map_obj, start, len, pg_i);
+	if (ret)
+		goto kfree_sg;
+
+	sg_num = dma_map_sg(bridge, sg, num_pages, dir);
+	if (sg_num < 1) {
+		pr_err("%s: dma_map_sg failed: %d\n", __func__, sg_num);
+		ret = -EFAULT;
+		goto kfree_sg;
+	}
+
+	pr_debug("%s: dma_map_sg mapped %d elements\n", __func__, sg_num);
+	map_obj->dma_info.sg_num = sg_num;
+
+	return 0;
+
+kfree_sg:
+	kfree(sg);
+	map_obj->dma_info.sg = NULL;
+out:
+	return ret;
+}
+
+int proc_begin_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+				enum dma_data_direction dir)
+{
+	/* Keep STATUS here for future additions to this function */
+	int status = 0;
+	struct process_context *pr_ctxt = (struct process_context *) hprocessor;
+	struct dmm_map_object *map_obj;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!pr_ctxt) {
+		status = -EFAULT;
+		goto err_out;
+	}
+
+	pr_debug("%s: addr 0x%x, size 0x%x, type %d\n", __func__,
+							(u32)pmpu_addr,
+							ul_size, dir);
+
+	/* find requested memory are in cached mapping information */
+	map_obj = find_containing_mapping(pr_ctxt, (u32) pmpu_addr, ul_size);
+	if (!map_obj) {
+		pr_err("%s: find_containing_mapping failed\n", __func__);
+		status = -EFAULT;
+		goto err_out;
+	}
+
+	if (memory_give_ownership(map_obj, (u32) pmpu_addr, ul_size, dir)) {
+		pr_err("%s: InValid address parameters %p %x\n",
+			       __func__, pmpu_addr, ul_size);
+		status = -EFAULT;
+	}
+
+err_out:
+
+	return status;
+}
+
+int proc_end_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+			enum dma_data_direction dir)
+{
+	/* Keep STATUS here for future additions to this function */
+	int status = 0;
+	struct process_context *pr_ctxt = (struct process_context *) hprocessor;
+	struct dmm_map_object *map_obj;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!pr_ctxt) {
+		status = -EFAULT;
+		goto err_out;
+	}
+
+	pr_debug("%s: addr 0x%x, size 0x%x, type %d\n", __func__,
+							(u32)pmpu_addr,
+							ul_size, dir);
+
+	/* find requested memory are in cached mapping information */
+	map_obj = find_containing_mapping(pr_ctxt, (u32) pmpu_addr, ul_size);
+	if (!map_obj) {
+		pr_err("%s: find_containing_mapping failed\n", __func__);
+		status = -EFAULT;
+		goto err_out;
+	}
+
+	if (memory_regain_ownership(map_obj, (u32) pmpu_addr, ul_size, dir)) {
+		pr_err("%s: InValid address parameters %p %x\n",
+		       __func__, pmpu_addr, ul_size);
+		status = -EFAULT;
+		goto err_out;
+	}
+
+err_out:
+	return status;
+}
+
+/*
+ *  ======== proc_flush_memory ========
+ *  Purpose:
+ *     Flush cache
+ */
+int proc_flush_memory(void *hprocessor, void *pmpu_addr,
+			     u32 ul_size, u32 ul_flags)
+{
+	enum dma_data_direction dir = DMA_BIDIRECTIONAL;
+
+	return proc_begin_dma(hprocessor, pmpu_addr, ul_size, dir);
+}
+
+/*
+ *  ======== proc_invalidate_memory ========
+ *  Purpose:
+ *     Invalidates the memory specified
+ */
+int proc_invalidate_memory(void *hprocessor, void *pmpu_addr, u32 size)
+{
+	enum dma_data_direction dir = DMA_FROM_DEVICE;
+
+	return proc_begin_dma(hprocessor, pmpu_addr, size, dir);
+}
+
+/*
+ *  ======== proc_get_resource_info ========
+ *  Purpose:
+ *      Enumerate the resources currently available on a processor.
+ */
+int proc_get_resource_info(void *hprocessor, u32 resource_type,
+				  struct dsp_resourceinfo *resource_info,
+				  u32 resource_info_size)
+{
+	int status = -EPERM;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct node_mgr *hnode_mgr = NULL;
+	struct nldr_object *nldr_obj = NULL;
+	struct rmm_target_obj *rmm = NULL;
+	struct io_mgr *hio_mgr = NULL;	/* IO manager handle */
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(resource_info != NULL);
+	DBC_REQUIRE(resource_info_size >= sizeof(struct dsp_resourceinfo));
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	switch (resource_type) {
+	case DSP_RESOURCE_DYNDARAM:
+	case DSP_RESOURCE_DYNSARAM:
+	case DSP_RESOURCE_DYNEXTERNAL:
+	case DSP_RESOURCE_DYNSRAM:
+		status = dev_get_node_manager(p_proc_object->hdev_obj,
+					      &hnode_mgr);
+		if (!hnode_mgr) {
+			status = -EFAULT;
+			goto func_end;
+		}
+
+		status = node_get_nldr_obj(hnode_mgr, &nldr_obj);
+		if (!status) {
+			status = nldr_get_rmm_manager(nldr_obj, &rmm);
+			if (rmm) {
+				if (!rmm_stat(rmm,
+					      (enum dsp_memtype)resource_type,
+					      (struct dsp_memstat *)
+					      &(resource_info->result.
+						mem_stat)))
+					status = -EINVAL;
+			} else {
+				status = -EFAULT;
+			}
+		}
+		break;
+	case DSP_RESOURCE_PROCLOAD:
+		status = dev_get_io_mgr(p_proc_object->hdev_obj, &hio_mgr);
+		if (hio_mgr)
+			status =
+			    p_proc_object->intf_fxns->
+			    pfn_io_get_proc_load(hio_mgr,
+						 (struct dsp_procloadstat *)
+						 &(resource_info->result.
+						   proc_load_stat));
+		else
+			status = -EFAULT;
+		break;
+	default:
+		status = -EPERM;
+		break;
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== proc_exit ========
+ *  Purpose:
+ *      Decrement reference count, and free resources when reference count is
+ *      0.
+ */
+void proc_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== proc_get_dev_object ========
+ *  Purpose:
+ *      Return the Dev Object handle for a given Processor.
+ *
+ */
+int proc_get_dev_object(void *hprocessor,
+			       struct dev_object **device_obj)
+{
+	int status = -EPERM;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(device_obj != NULL);
+
+	if (p_proc_object) {
+		*device_obj = p_proc_object->hdev_obj;
+		status = 0;
+	} else {
+		*device_obj = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE((!status && *device_obj != NULL) ||
+		   (status && *device_obj == NULL));
+
+	return status;
+}
+
+/*
+ *  ======== proc_get_state ========
+ *  Purpose:
+ *      Report the state of the specified DSP processor.
+ */
+int proc_get_state(void *hprocessor,
+			  struct dsp_processorstate *proc_state_obj,
+			  u32 state_info_size)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	int brd_status;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(proc_state_obj != NULL);
+	DBC_REQUIRE(state_info_size >= sizeof(struct dsp_processorstate));
+
+	if (p_proc_object) {
+		/* First, retrieve BRD state information */
+		status = (*p_proc_object->intf_fxns->pfn_brd_status)
+		    (p_proc_object->hbridge_context, &brd_status);
+		if (!status) {
+			switch (brd_status) {
+			case BRD_STOPPED:
+				proc_state_obj->proc_state = PROC_STOPPED;
+				break;
+			case BRD_SLEEP_TRANSITION:
+			case BRD_DSP_HIBERNATION:
+				/* Fall through */
+			case BRD_RUNNING:
+				proc_state_obj->proc_state = PROC_RUNNING;
+				break;
+			case BRD_LOADED:
+				proc_state_obj->proc_state = PROC_LOADED;
+				break;
+			case BRD_ERROR:
+				proc_state_obj->proc_state = PROC_ERROR;
+				break;
+			default:
+				proc_state_obj->proc_state = 0xFF;
+				status = -EPERM;
+				break;
+			}
+		}
+	} else {
+		status = -EFAULT;
+	}
+	dev_dbg(bridge, "%s, results: status: 0x%x proc_state_obj: 0x%x\n",
+		__func__, status, proc_state_obj->proc_state);
+	return status;
+}
+
+/*
+ *  ======== proc_get_trace ========
+ *  Purpose:
+ *      Retrieve the current contents of the trace buffer, located on the
+ *      Processor.  Predefined symbols for the trace buffer must have been
+ *      configured into the DSP executable.
+ *  Details:
+ *      We support using the symbols SYS_PUTCBEG and SYS_PUTCEND to define a
+ *      trace buffer, only.  Treat it as an undocumented feature.
+ *      This call is destructive, meaning the processor is placed in the monitor
+ *      state as a result of this function.
+ */
+int proc_get_trace(void *hprocessor, u8 * pbuf, u32 max_size)
+{
+	int status;
+	status = -ENOSYS;
+	return status;
+}
+
+/*
+ *  ======== proc_init ========
+ *  Purpose:
+ *      Initialize PROC's private state, keeping a reference count on each call
+ */
+bool proc_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== proc_load ========
+ *  Purpose:
+ *      Reset a processor and load a new base program image.
+ *      This will be an OEM-only function, and not part of the DSP/BIOS Bridge
+ *      application developer's API.
+ */
+int proc_load(void *hprocessor, const s32 argc_index,
+		     const char **user_args, const char **user_envp)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct io_mgr *hio_mgr;	/* IO manager handle */
+	struct msg_mgr *hmsg_mgr;
+	struct cod_manager *cod_mgr;	/* Code manager handle */
+	char *pargv0;		/* temp argv[0] ptr */
+	char **new_envp;	/* Updated envp[] array. */
+	char sz_proc_id[MAXPROCIDLEN];	/* Size of "PROC_ID=<n>" */
+	s32 envp_elems;		/* Num elements in envp[]. */
+	s32 cnew_envp;		/* "  " in new_envp[] */
+	s32 nproc_id = 0;	/* Anticipate MP version. */
+	struct dcd_manager *hdcd_handle;
+	struct dmm_object *dmm_mgr;
+	u32 dw_ext_end;
+	u32 proc_id;
+	int brd_state;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+#ifdef OPT_LOAD_TIME_INSTRUMENTATION
+	struct timeval tv1;
+	struct timeval tv2;
+#endif
+
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+	struct dspbridge_platform_data *pdata =
+	    omap_dspbridge_dev->dev.platform_data;
+#endif
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(argc_index > 0);
+	DBC_REQUIRE(user_args != NULL);
+
+#ifdef OPT_LOAD_TIME_INSTRUMENTATION
+	do_gettimeofday(&tv1);
+#endif
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	dev_get_cod_mgr(p_proc_object->hdev_obj, &cod_mgr);
+	if (!cod_mgr) {
+		status = -EPERM;
+		goto func_end;
+	}
+	status = proc_stop(hprocessor);
+	if (status)
+		goto func_end;
+
+	/* Place the board in the monitor state. */
+	status = proc_monitor(hprocessor);
+	if (status)
+		goto func_end;
+
+	/* Save ptr to  original argv[0]. */
+	pargv0 = (char *)user_args[0];
+	/*Prepend "PROC_ID=<nproc_id>"to envp array for target. */
+	envp_elems = get_envp_count((char **)user_envp);
+	cnew_envp = (envp_elems ? (envp_elems + 1) : (envp_elems + 2));
+	new_envp = kzalloc(cnew_envp * sizeof(char **), GFP_KERNEL);
+	if (new_envp) {
+		status = snprintf(sz_proc_id, MAXPROCIDLEN, PROC_ENVPROCID,
+				  nproc_id);
+		if (status == -1) {
+			dev_dbg(bridge, "%s: Proc ID string overflow\n",
+				__func__);
+			status = -EPERM;
+		} else {
+			new_envp =
+			    prepend_envp(new_envp, (char **)user_envp,
+					 envp_elems, cnew_envp, sz_proc_id);
+			/* Get the DCD Handle */
+			status = mgr_get_dcd_handle(p_proc_object->hmgr_obj,
+						    (u32 *) &hdcd_handle);
+			if (!status) {
+				/*  Before proceeding with new load,
+				 *  check if a previously registered COFF
+				 *  exists.
+				 *  If yes, unregister nodes in previously
+				 *  registered COFF.  If any error occurred,
+				 *  set previously registered COFF to NULL. */
+				if (p_proc_object->psz_last_coff != NULL) {
+					status =
+					    dcd_auto_unregister(hdcd_handle,
+								p_proc_object->
+								psz_last_coff);
+					/* Regardless of auto unregister status,
+					 *  free previously allocated
+					 *  memory. */
+					kfree(p_proc_object->psz_last_coff);
+					p_proc_object->psz_last_coff = NULL;
+				}
+			}
+			/* On success, do cod_open_base() */
+			status = cod_open_base(cod_mgr, (char *)user_args[0],
+					       COD_SYMB);
+		}
+	} else {
+		status = -ENOMEM;
+	}
+	if (!status) {
+		/* Auto-register data base */
+		/* Get the DCD Handle */
+		status = mgr_get_dcd_handle(p_proc_object->hmgr_obj,
+					    (u32 *) &hdcd_handle);
+		if (!status) {
+			/*  Auto register nodes in specified COFF
+			 *  file.  If registration did not fail,
+			 *  (status = 0 or -EACCES)
+			 *  save the name of the COFF file for
+			 *  de-registration in the future. */
+			status =
+			    dcd_auto_register(hdcd_handle,
+					      (char *)user_args[0]);
+			if (status == -EACCES)
+				status = 0;
+
+			if (status) {
+				status = -EPERM;
+			} else {
+				DBC_ASSERT(p_proc_object->psz_last_coff ==
+					   NULL);
+				/* Allocate memory for pszLastCoff */
+				p_proc_object->psz_last_coff =
+						kzalloc((strlen(user_args[0]) +
+						1), GFP_KERNEL);
+				/* If memory allocated, save COFF file name */
+				if (p_proc_object->psz_last_coff) {
+					strncpy(p_proc_object->psz_last_coff,
+						(char *)user_args[0],
+						(strlen((char *)user_args[0]) +
+						 1));
+				}
+			}
+		}
+	}
+	/* Update shared memory address and size */
+	if (!status) {
+		/*  Create the message manager. This must be done
+		 *  before calling the IOOnLoaded function. */
+		dev_get_msg_mgr(p_proc_object->hdev_obj, &hmsg_mgr);
+		if (!hmsg_mgr) {
+			status = msg_create(&hmsg_mgr, p_proc_object->hdev_obj,
+					    (msg_onexit) node_on_exit);
+			DBC_ASSERT(!status);
+			dev_set_msg_mgr(p_proc_object->hdev_obj, hmsg_mgr);
+		}
+	}
+	if (!status) {
+		/* Set the Device object's message manager */
+		status = dev_get_io_mgr(p_proc_object->hdev_obj, &hio_mgr);
+		if (hio_mgr)
+			status = (*p_proc_object->intf_fxns->pfn_io_on_loaded)
+								(hio_mgr);
+		else
+			status = -EFAULT;
+	}
+	if (!status) {
+		/* Now, attempt to load an exec: */
+
+		/* Boost the OPP level to Maximum level supported by baseport */
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+		if (pdata->cpu_set_freq)
+			(*pdata->cpu_set_freq) (pdata->mpu_speed[VDD1_OPP5]);
+#endif
+		status = cod_load_base(cod_mgr, argc_index, (char **)user_args,
+				       dev_brd_write_fxn,
+				       p_proc_object->hdev_obj, NULL);
+		if (status) {
+			if (status == -EBADF) {
+				dev_dbg(bridge, "%s: Failure to Load the EXE\n",
+					__func__);
+			}
+			if (status == -ESPIPE) {
+				pr_err("%s: Couldn't parse the file\n",
+				       __func__);
+			}
+		}
+		/* Requesting the lowest opp supported */
+#if defined(CONFIG_TIDSPBRIDGE_DVFS) && !defined(CONFIG_CPU_FREQ)
+		if (pdata->cpu_set_freq)
+			(*pdata->cpu_set_freq) (pdata->mpu_speed[VDD1_OPP1]);
+#endif
+
+	}
+	if (!status) {
+		/* Update the Processor status to loaded */
+		status = (*p_proc_object->intf_fxns->pfn_brd_set_state)
+		    (p_proc_object->hbridge_context, BRD_LOADED);
+		if (!status) {
+			p_proc_object->proc_state = PROC_LOADED;
+			if (p_proc_object->ntfy_obj)
+				proc_notify_clients(p_proc_object,
+						    DSP_PROCESSORSTATECHANGE);
+		}
+	}
+	if (!status) {
+		status = proc_get_processor_id(hprocessor, &proc_id);
+		if (proc_id == DSP_UNIT) {
+			/* Use all available DSP address space after EXTMEM
+			 * for DMM */
+			if (!status)
+				status = cod_get_sym_value(cod_mgr, EXTEND,
+							   &dw_ext_end);
+
+			/* Reset DMM structs and add an initial free chunk */
+			if (!status) {
+				status =
+				    dev_get_dmm_mgr(p_proc_object->hdev_obj,
+						    &dmm_mgr);
+				if (dmm_mgr) {
+					/* Set dw_ext_end to DMM START u8
+					 * address */
+					dw_ext_end =
+					    (dw_ext_end + 1) * DSPWORDSIZE;
+					/* DMM memory is from EXT_END */
+					status = dmm_create_tables(dmm_mgr,
+								   dw_ext_end,
+								   DMMPOOLSIZE);
+				} else {
+					status = -EFAULT;
+				}
+			}
+		}
+	}
+	/* Restore the original argv[0] */
+	kfree(new_envp);
+	user_args[0] = pargv0;
+	if (!status) {
+		if (!((*p_proc_object->intf_fxns->pfn_brd_status)
+				(p_proc_object->hbridge_context, &brd_state))) {
+			pr_info("%s: Processor Loaded %s\n", __func__, pargv0);
+			kfree(drv_datap->base_img);
+			drv_datap->base_img = kmalloc(strlen(pargv0) + 1,
+								GFP_KERNEL);
+			if (drv_datap->base_img)
+				strncpy(drv_datap->base_img, pargv0,
+							strlen(pargv0) + 1);
+			else
+				status = -ENOMEM;
+			DBC_ASSERT(brd_state == BRD_LOADED);
+		}
+	}
+
+func_end:
+	if (status) {
+		pr_err("%s: Processor failed to load\n", __func__);
+		proc_stop(p_proc_object);
+	}
+	DBC_ENSURE((!status
+		    && p_proc_object->proc_state == PROC_LOADED)
+		   || status);
+#ifdef OPT_LOAD_TIME_INSTRUMENTATION
+	do_gettimeofday(&tv2);
+	if (tv2.tv_usec < tv1.tv_usec) {
+		tv2.tv_usec += 1000000;
+		tv2.tv_sec--;
+	}
+	dev_dbg(bridge, "%s: time to load %d sec and %d usec\n", __func__,
+		tv2.tv_sec - tv1.tv_sec, tv2.tv_usec - tv1.tv_usec);
+#endif
+	return status;
+}
+
+/*
+ *  ======== proc_map ========
+ *  Purpose:
+ *      Maps a MPU buffer to DSP address space.
+ */
+int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
+		    void *req_addr, void **pp_map_addr, u32 ul_map_attr,
+		    struct process_context *pr_ctxt)
+{
+	u32 va_align;
+	u32 pa_align;
+	struct dmm_object *dmm_mgr;
+	u32 size_align;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_map_object *map_obj;
+	u32 tmp_addr = 0;
+
+#ifdef CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK
+	if ((ul_map_attr & BUFMODE_MASK) != RBUF) {
+		if (!IS_ALIGNED((u32)pmpu_addr, DSP_CACHE_LINE) ||
+		    !IS_ALIGNED(ul_size, DSP_CACHE_LINE)) {
+			pr_err("%s: not aligned: 0x%x (%d)\n", __func__,
+						(u32)pmpu_addr, ul_size);
+			return -EFAULT;
+		}
+	}
+#endif
+
+	/* Calculate the page-aligned PA, VA and size */
+	va_align = PG_ALIGN_LOW((u32) req_addr, PG_SIZE4K);
+	pa_align = PG_ALIGN_LOW((u32) pmpu_addr, PG_SIZE4K);
+	size_align = PG_ALIGN_HIGH(ul_size + (u32) pmpu_addr - pa_align,
+				   PG_SIZE4K);
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* Critical section */
+	mutex_lock(&proc_lock);
+	dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (dmm_mgr)
+		status = dmm_map_memory(dmm_mgr, va_align, size_align);
+	else
+		status = -EFAULT;
+
+	/* Add mapping to the page tables. */
+	if (!status) {
+
+		/* Mapped address = MSB of VA | LSB of PA */
+		tmp_addr = (va_align | ((u32) pmpu_addr & (PG_SIZE4K - 1)));
+		/* mapped memory resource tracking */
+		map_obj = add_mapping_info(pr_ctxt, pa_align, tmp_addr,
+						size_align);
+		if (!map_obj)
+			status = -ENOMEM;
+		else
+			status = (*p_proc_object->intf_fxns->pfn_brd_mem_map)
+			    (p_proc_object->hbridge_context, pa_align, va_align,
+			     size_align, ul_map_attr, map_obj->pages);
+	}
+	if (!status) {
+		/* Mapped address = MSB of VA | LSB of PA */
+		*pp_map_addr = (void *) tmp_addr;
+	} else {
+		remove_mapping_information(pr_ctxt, tmp_addr, size_align);
+		dmm_un_map_memory(dmm_mgr, va_align, &size_align);
+	}
+	mutex_unlock(&proc_lock);
+
+	if (status)
+		goto func_end;
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor %p, pmpu_addr %p, ul_size %x, "
+		"req_addr %p, ul_map_attr %x, pp_map_addr %p, va_align %x, "
+		"pa_align %x, size_align %x status 0x%x\n", __func__,
+		hprocessor, pmpu_addr, ul_size, req_addr, ul_map_attr,
+		pp_map_addr, va_align, pa_align, size_align, status);
+
+	return status;
+}
+
+/*
+ *  ======== proc_register_notify ========
+ *  Purpose:
+ *      Register to be notified of specific processor events.
+ */
+int proc_register_notify(void *hprocessor, u32 event_mask,
+				u32 notify_type, struct dsp_notification
+				* hnotification)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct deh_mgr *hdeh_mgr;
+
+	DBC_REQUIRE(hnotification != NULL);
+	DBC_REQUIRE(refs > 0);
+
+	/* Check processor handle */
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* Check if event mask is a valid processor related event */
+	if (event_mask & ~(DSP_PROCESSORSTATECHANGE | DSP_PROCESSORATTACH |
+			DSP_PROCESSORDETACH | DSP_PROCESSORRESTART |
+			DSP_MMUFAULT | DSP_SYSERROR | DSP_PWRERROR |
+			DSP_WDTOVERFLOW))
+		status = -EINVAL;
+
+	/* Check if notify type is valid */
+	if (notify_type != DSP_SIGNALEVENT)
+		status = -EINVAL;
+
+	if (!status) {
+		/* If event mask is not DSP_SYSERROR, DSP_MMUFAULT,
+		 * or DSP_PWRERROR then register event immediately. */
+		if (event_mask &
+		    ~(DSP_SYSERROR | DSP_MMUFAULT | DSP_PWRERROR |
+				DSP_WDTOVERFLOW)) {
+			status = ntfy_register(p_proc_object->ntfy_obj,
+					       hnotification, event_mask,
+					       notify_type);
+			/* Special case alert, special case alert!
+			 * If we're trying to *deregister* (i.e. event_mask
+			 * is 0), a DSP_SYSERROR or DSP_MMUFAULT notification,
+			 * we have to deregister with the DEH manager.
+			 * There's no way to know, based on event_mask which
+			 * manager the notification event was registered with,
+			 * so if we're trying to deregister and ntfy_register
+			 * failed, we'll give the deh manager a shot.
+			 */
+			if ((event_mask == 0) && status) {
+				status =
+				    dev_get_deh_mgr(p_proc_object->hdev_obj,
+						    &hdeh_mgr);
+				status =
+					bridge_deh_register_notify(hdeh_mgr,
+							event_mask,
+							notify_type,
+							hnotification);
+			}
+		} else {
+			status = dev_get_deh_mgr(p_proc_object->hdev_obj,
+						 &hdeh_mgr);
+			status =
+			    bridge_deh_register_notify(hdeh_mgr,
+					    event_mask,
+					    notify_type,
+					    hnotification);
+
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ */
+int proc_reserve_memory(void *hprocessor, u32 ul_size,
+			       void **pp_rsv_addr,
+			       struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_reserve_memory(dmm_mgr, ul_size, (u32 *) pp_rsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful reserve should be followed by insertion of rsv_obj
+	 * into dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	rsv_obj = kmalloc(sizeof(struct dmm_rsv_object), GFP_KERNEL);
+	if (rsv_obj) {
+		rsv_obj->dsp_reserved_addr = (u32) *pp_rsv_addr;
+		spin_lock(&pr_ctxt->dmm_rsv_lock);
+		list_add(&rsv_obj->link, &pr_ctxt->dmm_rsv_list);
+		spin_unlock(&pr_ctxt->dmm_rsv_lock);
+	}
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p ul_size: 0x%x pp_rsv_addr: 0x%p "
+		"status 0x%x\n", __func__, hprocessor,
+		ul_size, pp_rsv_addr, status);
+	return status;
+}
+
+/*
+ *  ======== proc_start ========
+ *  Purpose:
+ *      Start a processor running.
+ */
+int proc_start(void *hprocessor)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct cod_manager *cod_mgr;	/* Code manager handle */
+	u32 dw_dsp_addr;	/* Loaded code's entry point. */
+	int brd_state;
+
+	DBC_REQUIRE(refs > 0);
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* Call the bridge_brd_start */
+	if (p_proc_object->proc_state != PROC_LOADED) {
+		status = -EBADR;
+		goto func_end;
+	}
+	status = dev_get_cod_mgr(p_proc_object->hdev_obj, &cod_mgr);
+	if (!cod_mgr) {
+		status = -EFAULT;
+		goto func_cont;
+	}
+
+	status = cod_get_entry(cod_mgr, &dw_dsp_addr);
+	if (status)
+		goto func_cont;
+
+	status = (*p_proc_object->intf_fxns->pfn_brd_start)
+	    (p_proc_object->hbridge_context, dw_dsp_addr);
+	if (status)
+		goto func_cont;
+
+	/* Call dev_create2 */
+	status = dev_create2(p_proc_object->hdev_obj);
+	if (!status) {
+		p_proc_object->proc_state = PROC_RUNNING;
+		/* Deep sleep switces off the peripheral clocks.
+		 * we just put the DSP CPU in idle in the idle loop.
+		 * so there is no need to send a command to DSP */
+
+		if (p_proc_object->ntfy_obj) {
+			proc_notify_clients(p_proc_object,
+					    DSP_PROCESSORSTATECHANGE);
+		}
+	} else {
+		/* Failed to Create Node Manager and DISP Object
+		 * Stop the Processor from running. Put it in STOPPED State */
+		(void)(*p_proc_object->intf_fxns->
+		       pfn_brd_stop) (p_proc_object->hbridge_context);
+		p_proc_object->proc_state = PROC_STOPPED;
+	}
+func_cont:
+	if (!status) {
+		if (!((*p_proc_object->intf_fxns->pfn_brd_status)
+				(p_proc_object->hbridge_context, &brd_state))) {
+			pr_info("%s: dsp in running state\n", __func__);
+			DBC_ASSERT(brd_state != BRD_HIBERNATION);
+		}
+	} else {
+		pr_err("%s: Failed to start the dsp\n", __func__);
+		proc_stop(p_proc_object);
+	}
+
+func_end:
+	DBC_ENSURE((!status && p_proc_object->proc_state ==
+		    PROC_RUNNING) || status);
+	return status;
+}
+
+/*
+ *  ======== proc_stop ========
+ *  Purpose:
+ *      Stop a processor running.
+ */
+int proc_stop(void *hprocessor)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct msg_mgr *hmsg_mgr;
+	struct node_mgr *hnode_mgr;
+	void *hnode;
+	u32 node_tab_size = 1;
+	u32 num_nodes = 0;
+	u32 nodes_allocated = 0;
+	int brd_state;
+
+	DBC_REQUIRE(refs > 0);
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	/* check if there are any running nodes */
+	status = dev_get_node_manager(p_proc_object->hdev_obj, &hnode_mgr);
+	if (!status && hnode_mgr) {
+		status = node_enum_nodes(hnode_mgr, &hnode, node_tab_size,
+					 &num_nodes, &nodes_allocated);
+		if ((status == -EINVAL) || (nodes_allocated > 0)) {
+			pr_err("%s: Can't stop device, active nodes = %d \n",
+			       __func__, nodes_allocated);
+			return -EBADR;
+		}
+	}
+	/* Call the bridge_brd_stop */
+	/* It is OK to stop a device that does n't have nodes OR not started */
+	status =
+	    (*p_proc_object->intf_fxns->
+	     pfn_brd_stop) (p_proc_object->hbridge_context);
+	if (!status) {
+		dev_dbg(bridge, "%s: processor in standby mode\n", __func__);
+		p_proc_object->proc_state = PROC_STOPPED;
+		/* Destory the Node Manager, msg_ctrl Manager */
+		if (!(dev_destroy2(p_proc_object->hdev_obj))) {
+			/* Destroy the msg_ctrl by calling msg_delete */
+			dev_get_msg_mgr(p_proc_object->hdev_obj, &hmsg_mgr);
+			if (hmsg_mgr) {
+				msg_delete(hmsg_mgr);
+				dev_set_msg_mgr(p_proc_object->hdev_obj, NULL);
+			}
+			if (!((*p_proc_object->
+			      intf_fxns->pfn_brd_status) (p_proc_object->
+							  hbridge_context,
+							  &brd_state)))
+				DBC_ASSERT(brd_state == BRD_STOPPED);
+		}
+	} else {
+		pr_err("%s: Failed to stop the processor\n", __func__);
+	}
+func_end:
+
+	return status;
+}
+
+/*
+ *  ======== proc_un_map ========
+ *  Purpose:
+ *      Removes a MPU buffer mapping from the DSP address space.
+ */
+int proc_un_map(void *hprocessor, void *map_addr,
+		       struct process_context *pr_ctxt)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_object *dmm_mgr;
+	u32 va_align;
+	u32 size_align;
+
+	va_align = PG_ALIGN_LOW((u32) map_addr, PG_SIZE4K);
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(hprocessor, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	/* Critical section */
+	mutex_lock(&proc_lock);
+	/*
+	 * Update DMM structures. Get the size to unmap.
+	 * This function returns error if the VA is not mapped
+	 */
+	status = dmm_un_map_memory(dmm_mgr, (u32) va_align, &size_align);
+	/* Remove mapping from the page tables. */
+	if (!status) {
+		status = (*p_proc_object->intf_fxns->pfn_brd_mem_un_map)
+		    (p_proc_object->hbridge_context, va_align, size_align);
+	}
+
+	mutex_unlock(&proc_lock);
+	if (status)
+		goto func_end;
+
+	/*
+	 * A successful unmap should be followed by removal of map_obj
+	 * from dmm_map_list, so that mapped memory resource tracking
+	 * remains uptodate
+	 */
+	remove_mapping_information(pr_ctxt, (u32) map_addr, size_align);
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p map_addr: 0x%p status: 0x%x\n",
+		__func__, hprocessor, map_addr, status);
+	return status;
+}
+
+/*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ */
+int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
+				  struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_un_reserve_memory(dmm_mgr, (u32) prsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful unreserve should be followed by removal of rsv_obj
+	 * from dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	spin_lock(&pr_ctxt->dmm_rsv_lock);
+	list_for_each_entry(rsv_obj, &pr_ctxt->dmm_rsv_list, link) {
+		if (rsv_obj->dsp_reserved_addr == (u32) prsv_addr) {
+			list_del(&rsv_obj->link);
+			kfree(rsv_obj);
+			break;
+		}
+	}
+	spin_unlock(&pr_ctxt->dmm_rsv_lock);
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p prsv_addr: 0x%p status: 0x%x\n",
+		__func__, hprocessor, prsv_addr, status);
+	return status;
+}
+
+/*
+ *  ======== = proc_monitor ======== ==
+ *  Purpose:
+ *      Place the Processor in Monitor State. This is an internal
+ *      function and a requirement before Processor is loaded.
+ *      This does a bridge_brd_stop, dev_destroy2 and bridge_brd_monitor.
+ *      In dev_destroy2 we delete the node manager.
+ *  Parameters:
+ *      p_proc_object:    Pointer to Processor Object
+ *  Returns:
+ *      0:	Processor placed in monitor mode.
+ *      !0:       Failed to place processor in monitor mode.
+ *  Requires:
+ *      Valid Processor Handle
+ *  Ensures:
+ *      Success:	ProcObject state is PROC_IDLE
+ */
+static int proc_monitor(struct proc_object *proc_obj)
+{
+	int status = -EPERM;
+	struct msg_mgr *hmsg_mgr;
+	int brd_state;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(proc_obj);
+
+	/* This is needed only when Device is loaded when it is
+	 * already 'ACTIVE' */
+	/* Destory the Node Manager, msg_ctrl Manager */
+	if (!dev_destroy2(proc_obj->hdev_obj)) {
+		/* Destroy the msg_ctrl by calling msg_delete */
+		dev_get_msg_mgr(proc_obj->hdev_obj, &hmsg_mgr);
+		if (hmsg_mgr) {
+			msg_delete(hmsg_mgr);
+			dev_set_msg_mgr(proc_obj->hdev_obj, NULL);
+		}
+	}
+	/* Place the Board in the Monitor State */
+	if (!((*proc_obj->intf_fxns->pfn_brd_monitor)
+			  (proc_obj->hbridge_context))) {
+		status = 0;
+		if (!((*proc_obj->intf_fxns->pfn_brd_status)
+				  (proc_obj->hbridge_context, &brd_state)))
+			DBC_ASSERT(brd_state == BRD_IDLE);
+	}
+
+	DBC_ENSURE((!status && brd_state == BRD_IDLE) ||
+		   status);
+	return status;
+}
+
+/*
+ *  ======== get_envp_count ========
+ *  Purpose:
+ *      Return the number of elements in the envp array, including the
+ *      terminating NULL element.
+ */
+static s32 get_envp_count(char **envp)
+{
+	s32 ret = 0;
+	if (envp) {
+		while (*envp++)
+			ret++;
+
+		ret += 1;	/* Include the terminating NULL in the count. */
+	}
+
+	return ret;
+}
+
+/*
+ *  ======== prepend_envp ========
+ *  Purpose:
+ *      Prepend an environment variable=value pair to the new envp array, and
+ *      copy in the existing var=value pairs in the old envp array.
+ */
+static char **prepend_envp(char **new_envp, char **envp, s32 envp_elems,
+			   s32 cnew_envp, char *sz_var)
+{
+	char **pp_envp = new_envp;
+
+	DBC_REQUIRE(new_envp);
+
+	/* Prepend new environ var=value string */
+	*new_envp++ = sz_var;
+
+	/* Copy user's environment into our own. */
+	while (envp_elems--)
+		*new_envp++ = *envp++;
+
+	/* Ensure NULL terminates the new environment strings array. */
+	if (envp_elems == 0)
+		*new_envp = NULL;
+
+	return pp_envp;
+}
+
+/*
+ *  ======== proc_notify_clients ========
+ *  Purpose:
+ *      Notify the processor the events.
+ */
+int proc_notify_clients(void *proc, u32 events)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)proc;
+
+	DBC_REQUIRE(p_proc_object);
+	DBC_REQUIRE(is_valid_proc_event(events));
+	DBC_REQUIRE(refs > 0);
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	ntfy_notify(p_proc_object->ntfy_obj, events);
+func_end:
+	return status;
+}
+
+/*
+ *  ======== proc_notify_all_clients ========
+ *  Purpose:
+ *      Notify the processor the events. This includes notifying all clients
+ *      attached to a particulat DSP.
+ */
+int proc_notify_all_clients(void *proc, u32 events)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)proc;
+
+	DBC_REQUIRE(is_valid_proc_event(events));
+	DBC_REQUIRE(refs > 0);
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	dev_notify_clients(p_proc_object->hdev_obj, events);
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== proc_get_processor_id ========
+ *  Purpose:
+ *      Retrieves the processor ID.
+ */
+int proc_get_processor_id(void *proc, u32 * proc_id)
+{
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)proc;
+
+	if (p_proc_object)
+		*proc_id = p_proc_object->processor_id;
+	else
+		status = -EFAULT;
+
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/rmgr/pwr.c b/drivers/staging/tidspbridge/rmgr/pwr.c
new file mode 100644
index 00000000000..85cb1a2bc0b
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/pwr.c
@@ -0,0 +1,176 @@
+/*
+ * pwr.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * PWR API for controlling DSP power states.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/pwr.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/devdefs.h>
+#include <dspbridge/drv.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+
+/*  ----------------------------------- Link Driver */
+#include <dspbridge/dspioctl.h>
+
+/*
+ *  ======== pwr_sleep_dsp ========
+ *    Send command to DSP to enter sleep state.
+ */
+int pwr_sleep_dsp(const u32 sleep_code, const u32 timeout)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct bridge_dev_context *dw_context;
+	int status = -EPERM;
+	struct dev_object *hdev_obj = NULL;
+	u32 ioctlcode = 0;
+	u32 arg = timeout;
+
+	for (hdev_obj = (struct dev_object *)drv_get_first_dev_object();
+	     hdev_obj != NULL;
+	     hdev_obj =
+	     (struct dev_object *)drv_get_next_dev_object((u32) hdev_obj)) {
+		if (dev_get_bridge_context(hdev_obj,
+						(struct bridge_dev_context **)
+						   &dw_context)) {
+			continue;
+		}
+		if (dev_get_intf_fxns(hdev_obj,
+						(struct bridge_drv_interface **)
+						&intf_fxns)) {
+			continue;
+		}
+		if (sleep_code == PWR_DEEPSLEEP)
+			ioctlcode = BRDIOCTL_DEEPSLEEP;
+		else if (sleep_code == PWR_EMERGENCYDEEPSLEEP)
+			ioctlcode = BRDIOCTL_EMERGENCYSLEEP;
+		else
+			status = -EINVAL;
+
+		if (status != -EINVAL) {
+			status = (*intf_fxns->pfn_dev_cntrl) (dw_context,
+							      ioctlcode,
+							      (void *)&arg);
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== pwr_wake_dsp ========
+ *    Send command to DSP to wake it from sleep.
+ */
+int pwr_wake_dsp(const u32 timeout)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct bridge_dev_context *dw_context;
+	int status = -EPERM;
+	struct dev_object *hdev_obj = NULL;
+	u32 arg = timeout;
+
+	for (hdev_obj = (struct dev_object *)drv_get_first_dev_object();
+	     hdev_obj != NULL;
+	     hdev_obj = (struct dev_object *)drv_get_next_dev_object
+	     ((u32) hdev_obj)) {
+		if (!(dev_get_bridge_context(hdev_obj,
+						      (struct bridge_dev_context
+						       **)&dw_context))) {
+			if (!(dev_get_intf_fxns(hdev_obj,
+			      (struct bridge_drv_interface **)&intf_fxns))) {
+				status =
+				    (*intf_fxns->pfn_dev_cntrl) (dw_context,
+							BRDIOCTL_WAKEUP,
+							(void *)&arg);
+			}
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== pwr_pm_pre_scale========
+ *    Sends pre-notification message to DSP.
+ */
+int pwr_pm_pre_scale(u16 voltage_domain, u32 level)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct bridge_dev_context *dw_context;
+	int status = -EPERM;
+	struct dev_object *hdev_obj = NULL;
+	u32 arg[2];
+
+	arg[0] = voltage_domain;
+	arg[1] = level;
+
+	for (hdev_obj = (struct dev_object *)drv_get_first_dev_object();
+	     hdev_obj != NULL;
+	     hdev_obj = (struct dev_object *)drv_get_next_dev_object
+	     ((u32) hdev_obj)) {
+		if (!(dev_get_bridge_context(hdev_obj,
+						      (struct bridge_dev_context
+						       **)&dw_context))) {
+			if (!(dev_get_intf_fxns(hdev_obj,
+			      (struct bridge_drv_interface **)&intf_fxns))) {
+				status =
+				    (*intf_fxns->pfn_dev_cntrl) (dw_context,
+						BRDIOCTL_PRESCALE_NOTIFY,
+						(void *)&arg);
+			}
+		}
+	}
+	return status;
+}
+
+/*
+ *  ======== pwr_pm_post_scale========
+ *    Sends post-notification message to DSP.
+ */
+int pwr_pm_post_scale(u16 voltage_domain, u32 level)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct bridge_dev_context *dw_context;
+	int status = -EPERM;
+	struct dev_object *hdev_obj = NULL;
+	u32 arg[2];
+
+	arg[0] = voltage_domain;
+	arg[1] = level;
+
+	for (hdev_obj = (struct dev_object *)drv_get_first_dev_object();
+	     hdev_obj != NULL;
+	     hdev_obj = (struct dev_object *)drv_get_next_dev_object
+	     ((u32) hdev_obj)) {
+		if (!(dev_get_bridge_context(hdev_obj,
+						      (struct bridge_dev_context
+						       **)&dw_context))) {
+			if (!(dev_get_intf_fxns(hdev_obj,
+			      (struct bridge_drv_interface **)&intf_fxns))) {
+				status =
+				    (*intf_fxns->pfn_dev_cntrl) (dw_context,
+						BRDIOCTL_POSTSCALE_NOTIFY,
+						(void *)&arg);
+			}
+		}
+	}
+	return status;
+
+}
diff --git a/drivers/staging/tidspbridge/rmgr/rmm.c b/drivers/staging/tidspbridge/rmgr/rmm.c
new file mode 100644
index 00000000000..761e8f4fa46
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/rmm.c
@@ -0,0 +1,537 @@
+/*
+ * rmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*
+ *  This memory manager provides general heap management and arbitrary
+ *  alignment for any number of memory segments.
+ *
+ *  Notes:
+ *
+ *  Memory blocks are allocated from the end of the first free memory
+ *  block large enough to satisfy the request.  Alignment requirements
+ *  are satisfied by "sliding" the block forward until its base satisfies
+ *  the alignment specification; if this is not possible then the next
+ *  free block large enough to hold the request is tried.
+ *
+ *  Since alignment can cause the creation of a new free block - the
+ *  unused memory formed between the start of the original free block
+ *  and the start of the allocated block - the memory manager must free
+ *  this memory to prevent a memory leak.
+ *
+ *  Overlay memory is managed by reserving through rmm_alloc, and freeing
+ *  it through rmm_free. The memory manager prevents DSP code/data that is
+ *  overlayed from being overwritten as long as the memory it runs at has
+ *  been allocated, and not yet freed.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/list.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/rmm.h>
+
+/*
+ *  ======== rmm_header ========
+ *  This header is used to maintain a list of free memory blocks.
+ */
+struct rmm_header {
+	struct rmm_header *next;	/* form a free memory link list */
+	u32 size;		/* size of the free memory */
+	u32 addr;		/* DSP address of memory block */
+};
+
+/*
+ *  ======== rmm_ovly_sect ========
+ *  Keeps track of memory occupied by overlay section.
+ */
+struct rmm_ovly_sect {
+	struct list_head list_elem;
+	u32 addr;		/* Start of memory section */
+	u32 size;		/* Length (target MAUs) of section */
+	s32 page;		/* Memory page */
+};
+
+/*
+ *  ======== rmm_target_obj ========
+ */
+struct rmm_target_obj {
+	struct rmm_segment *seg_tab;
+	struct rmm_header **free_list;
+	u32 num_segs;
+	struct lst_list *ovly_list;	/* List of overlay memory in use */
+};
+
+static u32 refs;		/* module reference count */
+
+static bool alloc_block(struct rmm_target_obj *target, u32 segid, u32 size,
+			u32 align, u32 *dsp_address);
+static bool free_block(struct rmm_target_obj *target, u32 segid, u32 addr,
+		       u32 size);
+
+/*
+ *  ======== rmm_alloc ========
+ */
+int rmm_alloc(struct rmm_target_obj *target, u32 segid, u32 size,
+		     u32 align, u32 *dsp_address, bool reserve)
+{
+	struct rmm_ovly_sect *sect;
+	struct rmm_ovly_sect *prev_sect = NULL;
+	struct rmm_ovly_sect *new_sect;
+	u32 addr;
+	int status = 0;
+
+	DBC_REQUIRE(target);
+	DBC_REQUIRE(dsp_address != NULL);
+	DBC_REQUIRE(size > 0);
+	DBC_REQUIRE(reserve || (target->num_segs > 0));
+	DBC_REQUIRE(refs > 0);
+
+	if (!reserve) {
+		if (!alloc_block(target, segid, size, align, dsp_address)) {
+			status = -ENOMEM;
+		} else {
+			/* Increment the number of allocated blocks in this
+			 * segment */
+			target->seg_tab[segid].number++;
+		}
+		goto func_end;
+	}
+	/* An overlay section - See if block is already in use. If not,
+	 * insert into the list in ascending address size. */
+	addr = *dsp_address;
+	sect = (struct rmm_ovly_sect *)lst_first(target->ovly_list);
+	/*  Find place to insert new list element. List is sorted from
+	 *  smallest to largest address. */
+	while (sect != NULL) {
+		if (addr <= sect->addr) {
+			/* Check for overlap with sect */
+			if ((addr + size > sect->addr) || (prev_sect &&
+							   (prev_sect->addr +
+							    prev_sect->size >
+							    addr))) {
+				status = -ENXIO;
+			}
+			break;
+		}
+		prev_sect = sect;
+		sect = (struct rmm_ovly_sect *)lst_next(target->ovly_list,
+							(struct list_head *)
+							sect);
+	}
+	if (!status) {
+		/* No overlap - allocate list element for new section. */
+		new_sect = kzalloc(sizeof(struct rmm_ovly_sect), GFP_KERNEL);
+		if (new_sect == NULL) {
+			status = -ENOMEM;
+		} else {
+			lst_init_elem((struct list_head *)new_sect);
+			new_sect->addr = addr;
+			new_sect->size = size;
+			new_sect->page = segid;
+			if (sect == NULL) {
+				/* Put new section at the end of the list */
+				lst_put_tail(target->ovly_list,
+					     (struct list_head *)new_sect);
+			} else {
+				/* Put new section just before sect */
+				lst_insert_before(target->ovly_list,
+						  (struct list_head *)new_sect,
+						  (struct list_head *)sect);
+			}
+		}
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== rmm_create ========
+ */
+int rmm_create(struct rmm_target_obj **target_obj,
+		      struct rmm_segment seg_tab[], u32 num_segs)
+{
+	struct rmm_header *hptr;
+	struct rmm_segment *sptr, *tmp;
+	struct rmm_target_obj *target;
+	s32 i;
+	int status = 0;
+
+	DBC_REQUIRE(target_obj != NULL);
+	DBC_REQUIRE(num_segs == 0 || seg_tab != NULL);
+
+	/* Allocate DBL target object */
+	target = kzalloc(sizeof(struct rmm_target_obj), GFP_KERNEL);
+
+	if (target == NULL)
+		status = -ENOMEM;
+
+	if (status)
+		goto func_cont;
+
+	target->num_segs = num_segs;
+	if (!(num_segs > 0))
+		goto func_cont;
+
+	/* Allocate the memory for freelist from host's memory */
+	target->free_list = kzalloc(num_segs * sizeof(struct rmm_header *),
+							GFP_KERNEL);
+	if (target->free_list == NULL) {
+		status = -ENOMEM;
+	} else {
+		/* Allocate headers for each element on the free list */
+		for (i = 0; i < (s32) num_segs; i++) {
+			target->free_list[i] =
+				kzalloc(sizeof(struct rmm_header), GFP_KERNEL);
+			if (target->free_list[i] == NULL) {
+				status = -ENOMEM;
+				break;
+			}
+		}
+		/* Allocate memory for initial segment table */
+		target->seg_tab = kzalloc(num_segs * sizeof(struct rmm_segment),
+								GFP_KERNEL);
+		if (target->seg_tab == NULL) {
+			status = -ENOMEM;
+		} else {
+			/* Initialize segment table and free list */
+			sptr = target->seg_tab;
+			for (i = 0, tmp = seg_tab; num_segs > 0;
+			     num_segs--, i++) {
+				*sptr = *tmp;
+				hptr = target->free_list[i];
+				hptr->addr = tmp->base;
+				hptr->size = tmp->length;
+				hptr->next = NULL;
+				tmp++;
+				sptr++;
+			}
+		}
+	}
+func_cont:
+	/* Initialize overlay memory list */
+	if (!status) {
+		target->ovly_list = kzalloc(sizeof(struct lst_list),
+							GFP_KERNEL);
+		if (target->ovly_list == NULL)
+			status = -ENOMEM;
+		else
+			INIT_LIST_HEAD(&target->ovly_list->head);
+	}
+
+	if (!status) {
+		*target_obj = target;
+	} else {
+		*target_obj = NULL;
+		if (target)
+			rmm_delete(target);
+
+	}
+
+	DBC_ENSURE((!status && *target_obj)
+		   || (status && *target_obj == NULL));
+
+	return status;
+}
+
+/*
+ *  ======== rmm_delete ========
+ */
+void rmm_delete(struct rmm_target_obj *target)
+{
+	struct rmm_ovly_sect *ovly_section;
+	struct rmm_header *hptr;
+	struct rmm_header *next;
+	u32 i;
+
+	DBC_REQUIRE(target);
+
+	kfree(target->seg_tab);
+
+	if (target->ovly_list) {
+		while ((ovly_section = (struct rmm_ovly_sect *)lst_get_head
+			(target->ovly_list))) {
+			kfree(ovly_section);
+		}
+		DBC_ASSERT(LST_IS_EMPTY(target->ovly_list));
+		kfree(target->ovly_list);
+	}
+
+	if (target->free_list != NULL) {
+		/* Free elements on freelist */
+		for (i = 0; i < target->num_segs; i++) {
+			hptr = next = target->free_list[i];
+			while (next) {
+				hptr = next;
+				next = hptr->next;
+				kfree(hptr);
+			}
+		}
+		kfree(target->free_list);
+	}
+
+	kfree(target);
+}
+
+/*
+ *  ======== rmm_exit ========
+ */
+void rmm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== rmm_free ========
+ */
+bool rmm_free(struct rmm_target_obj *target, u32 segid, u32 dsp_addr, u32 size,
+	      bool reserved)
+{
+	struct rmm_ovly_sect *sect;
+	bool ret = true;
+
+	DBC_REQUIRE(target);
+
+	DBC_REQUIRE(reserved || segid < target->num_segs);
+	DBC_REQUIRE(reserved || (dsp_addr >= target->seg_tab[segid].base &&
+				 (dsp_addr + size) <= (target->seg_tab[segid].
+						   base +
+						   target->seg_tab[segid].
+						   length)));
+
+	/*
+	 *  Free or unreserve memory.
+	 */
+	if (!reserved) {
+		ret = free_block(target, segid, dsp_addr, size);
+		if (ret)
+			target->seg_tab[segid].number--;
+
+	} else {
+		/* Unreserve memory */
+		sect = (struct rmm_ovly_sect *)lst_first(target->ovly_list);
+		while (sect != NULL) {
+			if (dsp_addr == sect->addr) {
+				DBC_ASSERT(size == sect->size);
+				/* Remove from list */
+				lst_remove_elem(target->ovly_list,
+						(struct list_head *)sect);
+				kfree(sect);
+				break;
+			}
+			sect =
+			    (struct rmm_ovly_sect *)lst_next(target->ovly_list,
+							     (struct list_head
+							      *)sect);
+		}
+		if (sect == NULL)
+			ret = false;
+
+	}
+	return ret;
+}
+
+/*
+ *  ======== rmm_init ========
+ */
+bool rmm_init(void)
+{
+	DBC_REQUIRE(refs >= 0);
+
+	refs++;
+
+	return true;
+}
+
+/*
+ *  ======== rmm_stat ========
+ */
+bool rmm_stat(struct rmm_target_obj *target, enum dsp_memtype segid,
+	      struct dsp_memstat *mem_stat_buf)
+{
+	struct rmm_header *head;
+	bool ret = false;
+	u32 max_free_size = 0;
+	u32 total_free_size = 0;
+	u32 free_blocks = 0;
+
+	DBC_REQUIRE(mem_stat_buf != NULL);
+	DBC_ASSERT(target != NULL);
+
+	if ((u32) segid < target->num_segs) {
+		head = target->free_list[segid];
+
+		/* Collect data from free_list */
+		while (head != NULL) {
+			max_free_size = max(max_free_size, head->size);
+			total_free_size += head->size;
+			free_blocks++;
+			head = head->next;
+		}
+
+		/* ul_size */
+		mem_stat_buf->ul_size = target->seg_tab[segid].length;
+
+		/* ul_num_free_blocks */
+		mem_stat_buf->ul_num_free_blocks = free_blocks;
+
+		/* ul_total_free_size */
+		mem_stat_buf->ul_total_free_size = total_free_size;
+
+		/* ul_len_max_free_block */
+		mem_stat_buf->ul_len_max_free_block = max_free_size;
+
+		/* ul_num_alloc_blocks */
+		mem_stat_buf->ul_num_alloc_blocks =
+		    target->seg_tab[segid].number;
+
+		ret = true;
+	}
+
+	return ret;
+}
+
+/*
+ *  ======== balloc ========
+ *  This allocation function allocates memory from the lowest addresses
+ *  first.
+ */
+static bool alloc_block(struct rmm_target_obj *target, u32 segid, u32 size,
+			u32 align, u32 *dsp_address)
+{
+	struct rmm_header *head;
+	struct rmm_header *prevhead = NULL;
+	struct rmm_header *next;
+	u32 tmpalign;
+	u32 alignbytes;
+	u32 hsize;
+	u32 allocsize;
+	u32 addr;
+
+	alignbytes = (align == 0) ? 1 : align;
+	prevhead = NULL;
+	head = target->free_list[segid];
+
+	do {
+		hsize = head->size;
+		next = head->next;
+
+		addr = head->addr;	/* alloc from the bottom */
+
+		/* align allocation */
+		(tmpalign = (u32) addr % alignbytes);
+		if (tmpalign != 0)
+			tmpalign = alignbytes - tmpalign;
+
+		allocsize = size + tmpalign;
+
+		if (hsize >= allocsize) {	/* big enough */
+			if (hsize == allocsize && prevhead != NULL) {
+				prevhead->next = next;
+				kfree(head);
+			} else {
+				head->size = hsize - allocsize;
+				head->addr += allocsize;
+			}
+
+			/* free up any hole created by alignment */
+			if (tmpalign)
+				free_block(target, segid, addr, tmpalign);
+
+			*dsp_address = addr + tmpalign;
+			return true;
+		}
+
+		prevhead = head;
+		head = next;
+
+	} while (head != NULL);
+
+	return false;
+}
+
+/*
+ *  ======== free_block ========
+ *  TO DO: free_block() allocates memory, which could result in failure.
+ *  Could allocate an rmm_header in rmm_alloc(), to be kept in a pool.
+ *  free_block() could use an rmm_header from the pool, freeing as blocks
+ *  are coalesced.
+ */
+static bool free_block(struct rmm_target_obj *target, u32 segid, u32 addr,
+		       u32 size)
+{
+	struct rmm_header *head;
+	struct rmm_header *thead;
+	struct rmm_header *rhead;
+	bool ret = true;
+
+	/* Create a memory header to hold the newly free'd block. */
+	rhead = kzalloc(sizeof(struct rmm_header), GFP_KERNEL);
+	if (rhead == NULL) {
+		ret = false;
+	} else {
+		/* search down the free list to find the right place for addr */
+		head = target->free_list[segid];
+
+		if (addr >= head->addr) {
+			while (head->next != NULL && addr > head->next->addr)
+				head = head->next;
+
+			thead = head->next;
+
+			head->next = rhead;
+			rhead->next = thead;
+			rhead->addr = addr;
+			rhead->size = size;
+		} else {
+			*rhead = *head;
+			head->next = rhead;
+			head->addr = addr;
+			head->size = size;
+			thead = rhead->next;
+		}
+
+		/* join with upper block, if possible */
+		if (thead != NULL && (rhead->addr + rhead->size) ==
+		    thead->addr) {
+			head->next = rhead->next;
+			thead->size = size + thead->size;
+			thead->addr = addr;
+			kfree(rhead);
+			rhead = thead;
+		}
+
+		/* join with the lower block, if possible */
+		if ((head->addr + head->size) == rhead->addr) {
+			head->next = rhead->next;
+			head->size = head->size + rhead->size;
+			kfree(rhead);
+		}
+	}
+
+	return ret;
+}
diff --git a/drivers/staging/tidspbridge/rmgr/strm.c b/drivers/staging/tidspbridge/rmgr/strm.c
new file mode 100644
index 00000000000..ef2ec9497b1
--- /dev/null
+++ b/drivers/staging/tidspbridge/rmgr/strm.c
@@ -0,0 +1,853 @@
+/*
+ * strm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * DSP/BIOS Bridge Stream Manager.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Bridge Driver */
+#include <dspbridge/dspdefs.h>
+
+/*  ----------------------------------- Resource Manager */
+#include <dspbridge/nodepriv.h>
+
+/*  ----------------------------------- Others */
+#include <dspbridge/cmm.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/strm.h>
+
+#include <dspbridge/cfg.h>
+#include <dspbridge/resourcecleanup.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define DEFAULTTIMEOUT      10000
+#define DEFAULTNUMBUFS      2
+
+/*
+ *  ======== strm_mgr ========
+ *  The strm_mgr contains device information needed to open the underlying
+ *  channels of a stream.
+ */
+struct strm_mgr {
+	struct dev_object *dev_obj;	/* Device for this processor */
+	struct chnl_mgr *hchnl_mgr;	/* Channel manager */
+	/* Function interface to Bridge driver */
+	struct bridge_drv_interface *intf_fxns;
+};
+
+/*
+ *  ======== strm_object ========
+ *  This object is allocated in strm_open().
+ */
+struct strm_object {
+	struct strm_mgr *strm_mgr_obj;
+	struct chnl_object *chnl_obj;
+	u32 dir;		/* DSP_TONODE or DSP_FROMNODE */
+	u32 utimeout;
+	u32 num_bufs;		/* Max # of bufs allowed in stream */
+	u32 un_bufs_in_strm;	/* Current # of bufs in stream */
+	u32 ul_n_bytes;		/* bytes transferred since idled */
+	/* STREAM_IDLE, STREAM_READY, ... */
+	enum dsp_streamstate strm_state;
+	void *user_event;	/* Saved for strm_get_info() */
+	enum dsp_strmmode strm_mode;	/* STRMMODE_[PROCCOPY][ZEROCOPY]... */
+	u32 udma_chnl_id;	/* DMA chnl id */
+	u32 udma_priority;	/* DMA priority:DMAPRI_[LOW][HIGH] */
+	u32 segment_id;		/* >0 is SM segment.=0 is local heap */
+	u32 buf_alignment;	/* Alignment for stream bufs */
+	/* Stream's SM address translator */
+	struct cmm_xlatorobject *xlator;
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+
+/*  ----------------------------------- Function Prototypes */
+static int delete_strm(struct strm_object *stream_obj);
+
+/*
+ *  ======== strm_allocate_buffer ========
+ *  Purpose:
+ *      Allocates buffers for a stream.
+ */
+int strm_allocate_buffer(struct strm_res_object *strmres, u32 usize,
+				u8 **ap_buffer, u32 num_bufs,
+				struct process_context *pr_ctxt)
+{
+	int status = 0;
+	u32 alloc_cnt = 0;
+	u32 i;
+	struct strm_object *stream_obj = strmres->hstream;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(ap_buffer != NULL);
+
+	if (stream_obj) {
+		/*
+		 * Allocate from segment specified at time of stream open.
+		 */
+		if (usize == 0)
+			status = -EINVAL;
+
+	} else {
+		status = -EFAULT;
+	}
+
+	if (status)
+		goto func_end;
+
+	for (i = 0; i < num_bufs; i++) {
+		DBC_ASSERT(stream_obj->xlator != NULL);
+		(void)cmm_xlator_alloc_buf(stream_obj->xlator, &ap_buffer[i],
+					   usize);
+		if (ap_buffer[i] == NULL) {
+			status = -ENOMEM;
+			alloc_cnt = i;
+			break;
+		}
+	}
+	if (status)
+		strm_free_buffer(strmres, ap_buffer, alloc_cnt, pr_ctxt);
+
+	if (status)
+		goto func_end;
+
+	drv_proc_update_strm_res(num_bufs, strmres);
+
+func_end:
+	return status;
+}
+
+/*
+ *  ======== strm_close ========
+ *  Purpose:
+ *      Close a stream opened with strm_open().
+ */
+int strm_close(struct strm_res_object *strmres,
+		      struct process_context *pr_ctxt)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct chnl_info chnl_info_obj;
+	int status = 0;
+	struct strm_object *stream_obj = strmres->hstream;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!stream_obj) {
+		status = -EFAULT;
+	} else {
+		/* Have all buffers been reclaimed? If not, return
+		 * -EPIPE */
+		intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+		status =
+		    (*intf_fxns->pfn_chnl_get_info) (stream_obj->chnl_obj,
+						     &chnl_info_obj);
+		DBC_ASSERT(!status);
+
+		if (chnl_info_obj.cio_cs > 0 || chnl_info_obj.cio_reqs > 0)
+			status = -EPIPE;
+		else
+			status = delete_strm(stream_obj);
+	}
+
+	if (status)
+		goto func_end;
+
+	idr_remove(pr_ctxt->stream_id, strmres->id);
+func_end:
+	DBC_ENSURE(status == 0 || status == -EFAULT ||
+		   status == -EPIPE || status == -EPERM);
+
+	dev_dbg(bridge, "%s: stream_obj: %p, status 0x%x\n", __func__,
+		stream_obj, status);
+	return status;
+}
+
+/*
+ *  ======== strm_create ========
+ *  Purpose:
+ *      Create a STRM manager object.
+ */
+int strm_create(struct strm_mgr **strm_man,
+		       struct dev_object *dev_obj)
+{
+	struct strm_mgr *strm_mgr_obj;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(strm_man != NULL);
+	DBC_REQUIRE(dev_obj != NULL);
+
+	*strm_man = NULL;
+	/* Allocate STRM manager object */
+	strm_mgr_obj = kzalloc(sizeof(struct strm_mgr), GFP_KERNEL);
+	if (strm_mgr_obj == NULL)
+		status = -ENOMEM;
+	else
+		strm_mgr_obj->dev_obj = dev_obj;
+
+	/* Get Channel manager and Bridge function interface */
+	if (!status) {
+		status = dev_get_chnl_mgr(dev_obj, &(strm_mgr_obj->hchnl_mgr));
+		if (!status) {
+			(void)dev_get_intf_fxns(dev_obj,
+						&(strm_mgr_obj->intf_fxns));
+			DBC_ASSERT(strm_mgr_obj->intf_fxns != NULL);
+		}
+	}
+
+	if (!status)
+		*strm_man = strm_mgr_obj;
+	else
+		kfree(strm_mgr_obj);
+
+	DBC_ENSURE((!status && *strm_man) || (status && *strm_man == NULL));
+
+	return status;
+}
+
+/*
+ *  ======== strm_delete ========
+ *  Purpose:
+ *      Delete the STRM Manager Object.
+ */
+void strm_delete(struct strm_mgr *strm_mgr_obj)
+{
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(strm_mgr_obj);
+
+	kfree(strm_mgr_obj);
+}
+
+/*
+ *  ======== strm_exit ========
+ *  Purpose:
+ *      Discontinue usage of STRM module.
+ */
+void strm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+
+	DBC_ENSURE(refs >= 0);
+}
+
+/*
+ *  ======== strm_free_buffer ========
+ *  Purpose:
+ *      Frees the buffers allocated for a stream.
+ */
+int strm_free_buffer(struct strm_res_object *strmres, u8 ** ap_buffer,
+			    u32 num_bufs, struct process_context *pr_ctxt)
+{
+	int status = 0;
+	u32 i = 0;
+	struct strm_object *stream_obj = strmres->hstream;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(ap_buffer != NULL);
+
+	if (!stream_obj)
+		status = -EFAULT;
+
+	if (!status) {
+		for (i = 0; i < num_bufs; i++) {
+			DBC_ASSERT(stream_obj->xlator != NULL);
+			status =
+			    cmm_xlator_free_buf(stream_obj->xlator,
+						ap_buffer[i]);
+			if (status)
+				break;
+			ap_buffer[i] = NULL;
+		}
+	}
+	drv_proc_update_strm_res(num_bufs - i, strmres);
+
+	return status;
+}
+
+/*
+ *  ======== strm_get_info ========
+ *  Purpose:
+ *      Retrieves information about a stream.
+ */
+int strm_get_info(struct strm_object *stream_obj,
+			 struct stream_info *stream_info,
+			 u32 stream_info_size)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct chnl_info chnl_info_obj;
+	int status = 0;
+	void *virt_base = NULL;	/* NULL if no SM used */
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(stream_info != NULL);
+	DBC_REQUIRE(stream_info_size >= sizeof(struct stream_info));
+
+	if (!stream_obj) {
+		status = -EFAULT;
+	} else {
+		if (stream_info_size < sizeof(struct stream_info)) {
+			/* size of users info */
+			status = -EINVAL;
+		}
+	}
+	if (status)
+		goto func_end;
+
+	intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+	status =
+	    (*intf_fxns->pfn_chnl_get_info) (stream_obj->chnl_obj,
+						  &chnl_info_obj);
+	if (status)
+		goto func_end;
+
+	if (stream_obj->xlator) {
+		/* We have a translator */
+		DBC_ASSERT(stream_obj->segment_id > 0);
+		cmm_xlator_info(stream_obj->xlator, (u8 **) &virt_base, 0,
+				stream_obj->segment_id, false);
+	}
+	stream_info->segment_id = stream_obj->segment_id;
+	stream_info->strm_mode = stream_obj->strm_mode;
+	stream_info->virt_base = virt_base;
+	stream_info->user_strm->number_bufs_allowed = stream_obj->num_bufs;
+	stream_info->user_strm->number_bufs_in_stream = chnl_info_obj.cio_cs +
+	    chnl_info_obj.cio_reqs;
+	/* # of bytes transferred since last call to DSPStream_Idle() */
+	stream_info->user_strm->ul_number_bytes = chnl_info_obj.bytes_tx;
+	stream_info->user_strm->sync_object_handle = chnl_info_obj.event_obj;
+	/* Determine stream state based on channel state and info */
+	if (chnl_info_obj.dw_state & CHNL_STATEEOS) {
+		stream_info->user_strm->ss_stream_state = STREAM_DONE;
+	} else {
+		if (chnl_info_obj.cio_cs > 0)
+			stream_info->user_strm->ss_stream_state = STREAM_READY;
+		else if (chnl_info_obj.cio_reqs > 0)
+			stream_info->user_strm->ss_stream_state =
+			    STREAM_PENDING;
+		else
+			stream_info->user_strm->ss_stream_state = STREAM_IDLE;
+
+	}
+func_end:
+	return status;
+}
+
+/*
+ *  ======== strm_idle ========
+ *  Purpose:
+ *      Idles a particular stream.
+ */
+int strm_idle(struct strm_object *stream_obj, bool flush_data)
+{
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+
+	if (!stream_obj) {
+		status = -EFAULT;
+	} else {
+		intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+
+		status = (*intf_fxns->pfn_chnl_idle) (stream_obj->chnl_obj,
+						      stream_obj->utimeout,
+						      flush_data);
+	}
+
+	dev_dbg(bridge, "%s: stream_obj: %p flush_data: 0x%x status: 0x%x\n",
+		__func__, stream_obj, flush_data, status);
+	return status;
+}
+
+/*
+ *  ======== strm_init ========
+ *  Purpose:
+ *      Initialize the STRM module.
+ */
+bool strm_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	return ret;
+}
+
+/*
+ *  ======== strm_issue ========
+ *  Purpose:
+ *      Issues a buffer on a stream
+ */
+int strm_issue(struct strm_object *stream_obj, u8 *pbuf, u32 ul_bytes,
+		      u32 ul_buf_size, u32 dw_arg)
+{
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+	void *tmp_buf = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(pbuf != NULL);
+
+	if (!stream_obj) {
+		status = -EFAULT;
+	} else {
+		intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+
+		if (stream_obj->segment_id != 0) {
+			tmp_buf = cmm_xlator_translate(stream_obj->xlator,
+						       (void *)pbuf,
+						       CMM_VA2DSPPA);
+			if (tmp_buf == NULL)
+				status = -ESRCH;
+
+		}
+		if (!status) {
+			status = (*intf_fxns->pfn_chnl_add_io_req)
+			    (stream_obj->chnl_obj, pbuf, ul_bytes, ul_buf_size,
+			     (u32) tmp_buf, dw_arg);
+		}
+		if (status == -EIO)
+			status = -ENOSR;
+	}
+
+	dev_dbg(bridge, "%s: stream_obj: %p pbuf: %p ul_bytes: 0x%x dw_arg:"
+		" 0x%x status: 0x%x\n", __func__, stream_obj, pbuf,
+		ul_bytes, dw_arg, status);
+	return status;
+}
+
+/*
+ *  ======== strm_open ========
+ *  Purpose:
+ *      Open a stream for sending/receiving data buffers to/from a task or
+ *      XDAIS socket node on the DSP.
+ */
+int strm_open(struct node_object *hnode, u32 dir, u32 index,
+		     struct strm_attr *pattr,
+		     struct strm_res_object **strmres,
+		     struct process_context *pr_ctxt)
+{
+	struct strm_mgr *strm_mgr_obj;
+	struct bridge_drv_interface *intf_fxns;
+	u32 ul_chnl_id;
+	struct strm_object *strm_obj = NULL;
+	s8 chnl_mode;
+	struct chnl_attr chnl_attr_obj;
+	int status = 0;
+	struct cmm_object *hcmm_mgr = NULL;	/* Shared memory manager hndl */
+
+	void *stream_res;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(strmres != NULL);
+	DBC_REQUIRE(pattr != NULL);
+	*strmres = NULL;
+	if (dir != DSP_TONODE && dir != DSP_FROMNODE) {
+		status = -EPERM;
+	} else {
+		/* Get the channel id from the node (set in node_connect()) */
+		status = node_get_channel_id(hnode, dir, index, &ul_chnl_id);
+	}
+	if (!status)
+		status = node_get_strm_mgr(hnode, &strm_mgr_obj);
+
+	if (!status) {
+		strm_obj = kzalloc(sizeof(struct strm_object), GFP_KERNEL);
+		if (strm_obj == NULL) {
+			status = -ENOMEM;
+		} else {
+			strm_obj->strm_mgr_obj = strm_mgr_obj;
+			strm_obj->dir = dir;
+			strm_obj->strm_state = STREAM_IDLE;
+			strm_obj->user_event = pattr->user_event;
+			if (pattr->stream_attr_in != NULL) {
+				strm_obj->utimeout =
+				    pattr->stream_attr_in->utimeout;
+				strm_obj->num_bufs =
+				    pattr->stream_attr_in->num_bufs;
+				strm_obj->strm_mode =
+				    pattr->stream_attr_in->strm_mode;
+				strm_obj->segment_id =
+				    pattr->stream_attr_in->segment_id;
+				strm_obj->buf_alignment =
+				    pattr->stream_attr_in->buf_alignment;
+				strm_obj->udma_chnl_id =
+				    pattr->stream_attr_in->udma_chnl_id;
+				strm_obj->udma_priority =
+				    pattr->stream_attr_in->udma_priority;
+				chnl_attr_obj.uio_reqs =
+				    pattr->stream_attr_in->num_bufs;
+			} else {
+				strm_obj->utimeout = DEFAULTTIMEOUT;
+				strm_obj->num_bufs = DEFAULTNUMBUFS;
+				strm_obj->strm_mode = STRMMODE_PROCCOPY;
+				strm_obj->segment_id = 0;	/* local mem */
+				strm_obj->buf_alignment = 0;
+				strm_obj->udma_chnl_id = 0;
+				strm_obj->udma_priority = 0;
+				chnl_attr_obj.uio_reqs = DEFAULTNUMBUFS;
+			}
+			chnl_attr_obj.reserved1 = NULL;
+			/* DMA chnl flush timeout */
+			chnl_attr_obj.reserved2 = strm_obj->utimeout;
+			chnl_attr_obj.event_obj = NULL;
+			if (pattr->user_event != NULL)
+				chnl_attr_obj.event_obj = pattr->user_event;
+
+		}
+	}
+	if (status)
+		goto func_cont;
+
+	if ((pattr->virt_base == NULL) || !(pattr->ul_virt_size > 0))
+		goto func_cont;
+
+	/* No System DMA */
+	DBC_ASSERT(strm_obj->strm_mode != STRMMODE_LDMA);
+	/* Get the shared mem mgr for this streams dev object */
+	status = dev_get_cmm_mgr(strm_mgr_obj->dev_obj, &hcmm_mgr);
+	if (!status) {
+		/*Allocate a SM addr translator for this strm. */
+		status = cmm_xlator_create(&strm_obj->xlator, hcmm_mgr, NULL);
+		if (!status) {
+			DBC_ASSERT(strm_obj->segment_id > 0);
+			/*  Set translators Virt Addr attributes */
+			status = cmm_xlator_info(strm_obj->xlator,
+						 (u8 **) &pattr->virt_base,
+						 pattr->ul_virt_size,
+						 strm_obj->segment_id, true);
+		}
+	}
+func_cont:
+	if (!status) {
+		/* Open channel */
+		chnl_mode = (dir == DSP_TONODE) ?
+		    CHNL_MODETODSP : CHNL_MODEFROMDSP;
+		intf_fxns = strm_mgr_obj->intf_fxns;
+		status = (*intf_fxns->pfn_chnl_open) (&(strm_obj->chnl_obj),
+						      strm_mgr_obj->hchnl_mgr,
+						      chnl_mode, ul_chnl_id,
+						      &chnl_attr_obj);
+		if (status) {
+			/*
+			 * over-ride non-returnable status codes so we return
+			 * something documented
+			 */
+			if (status != -ENOMEM && status !=
+			    -EINVAL && status != -EPERM) {
+				/*
+				 * We got a status that's not return-able.
+				 * Assert that we got something we were
+				 * expecting (-EFAULT isn't acceptable,
+				 * strm_mgr_obj->hchnl_mgr better be valid or we
+				 * assert here), and then return -EPERM.
+				 */
+				DBC_ASSERT(status == -ENOSR ||
+					   status == -ECHRNG ||
+					   status == -EALREADY ||
+					   status == -EIO);
+				status = -EPERM;
+			}
+		}
+	}
+	if (!status) {
+		status = drv_proc_insert_strm_res_element(strm_obj,
+							&stream_res, pr_ctxt);
+		if (status)
+			delete_strm(strm_obj);
+		else
+			*strmres = (struct strm_res_object *)stream_res;
+	} else {
+		(void)delete_strm(strm_obj);
+	}
+
+	/* ensure we return a documented error code */
+	DBC_ENSURE((!status && strm_obj) ||
+		   (*strmres == NULL && (status == -EFAULT ||
+					status == -EPERM
+					|| status == -EINVAL)));
+
+	dev_dbg(bridge, "%s: hnode: %p dir: 0x%x index: 0x%x pattr: %p "
+		"strmres: %p status: 0x%x\n", __func__,
+		hnode, dir, index, pattr, strmres, status);
+	return status;
+}
+
+/*
+ *  ======== strm_reclaim ========
+ *  Purpose:
+ *      Relcaims a buffer from a stream.
+ */
+int strm_reclaim(struct strm_object *stream_obj, u8 ** buf_ptr,
+			u32 *nbytes, u32 *buff_size, u32 *pdw_arg)
+{
+	struct bridge_drv_interface *intf_fxns;
+	struct chnl_ioc chnl_ioc_obj;
+	int status = 0;
+	void *tmp_buf = NULL;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(buf_ptr != NULL);
+	DBC_REQUIRE(nbytes != NULL);
+	DBC_REQUIRE(pdw_arg != NULL);
+
+	if (!stream_obj) {
+		status = -EFAULT;
+		goto func_end;
+	}
+	intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+
+	status =
+	    (*intf_fxns->pfn_chnl_get_ioc) (stream_obj->chnl_obj,
+					    stream_obj->utimeout,
+					    &chnl_ioc_obj);
+	if (!status) {
+		*nbytes = chnl_ioc_obj.byte_size;
+		if (buff_size)
+			*buff_size = chnl_ioc_obj.buf_size;
+
+		*pdw_arg = chnl_ioc_obj.dw_arg;
+		if (!CHNL_IS_IO_COMPLETE(chnl_ioc_obj)) {
+			if (CHNL_IS_TIMED_OUT(chnl_ioc_obj)) {
+				status = -ETIME;
+			} else {
+				/* Allow reclaims after idle to succeed */
+				if (!CHNL_IS_IO_CANCELLED(chnl_ioc_obj))
+					status = -EPERM;
+
+			}
+		}
+		/* Translate zerocopy buffer if channel not canceled. */
+		if (!status
+		    && (!CHNL_IS_IO_CANCELLED(chnl_ioc_obj))
+		    && (stream_obj->strm_mode == STRMMODE_ZEROCOPY)) {
+			/*
+			 *  This is a zero-copy channel so chnl_ioc_obj.pbuf
+			 *  contains the DSP address of SM. We need to
+			 *  translate it to a virtual address for the user
+			 *  thread to access.
+			 *  Note: Could add CMM_DSPPA2VA to CMM in the future.
+			 */
+			tmp_buf = cmm_xlator_translate(stream_obj->xlator,
+						       chnl_ioc_obj.pbuf,
+						       CMM_DSPPA2PA);
+			if (tmp_buf != NULL) {
+				/* now convert this GPP Pa to Va */
+				tmp_buf = cmm_xlator_translate(stream_obj->
+							       xlator,
+							       tmp_buf,
+							       CMM_PA2VA);
+			}
+			if (tmp_buf == NULL)
+				status = -ESRCH;
+
+			chnl_ioc_obj.pbuf = tmp_buf;
+		}
+		*buf_ptr = chnl_ioc_obj.pbuf;
+	}
+func_end:
+	/* ensure we return a documented return code */
+	DBC_ENSURE(!status || status == -EFAULT ||
+		   status == -ETIME || status == -ESRCH ||
+		   status == -EPERM);
+
+	dev_dbg(bridge, "%s: stream_obj: %p buf_ptr: %p nbytes: %p "
+		"pdw_arg: %p status 0x%x\n", __func__, stream_obj,
+		buf_ptr, nbytes, pdw_arg, status);
+	return status;
+}
+
+/*
+ *  ======== strm_register_notify ========
+ *  Purpose:
+ *      Register to be notified on specific events for this stream.
+ */
+int strm_register_notify(struct strm_object *stream_obj, u32 event_mask,
+				u32 notify_type, struct dsp_notification
+				* hnotification)
+{
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(hnotification != NULL);
+
+	if (!stream_obj) {
+		status = -EFAULT;
+	} else if ((event_mask & ~((DSP_STREAMIOCOMPLETION) |
+				   DSP_STREAMDONE)) != 0) {
+		status = -EINVAL;
+	} else {
+		if (notify_type != DSP_SIGNALEVENT)
+			status = -ENOSYS;
+
+	}
+	if (!status) {
+		intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+
+		status =
+		    (*intf_fxns->pfn_chnl_register_notify) (stream_obj->
+							    chnl_obj,
+							    event_mask,
+							    notify_type,
+							    hnotification);
+	}
+	/* ensure we return a documented return code */
+	DBC_ENSURE(!status || status == -EFAULT ||
+		   status == -ETIME || status == -ESRCH ||
+		   status == -ENOSYS || status == -EPERM);
+	return status;
+}
+
+/*
+ *  ======== strm_select ========
+ *  Purpose:
+ *      Selects a ready stream.
+ */
+int strm_select(struct strm_object **strm_tab, u32 strms,
+		       u32 *pmask, u32 utimeout)
+{
+	u32 index;
+	struct chnl_info chnl_info_obj;
+	struct bridge_drv_interface *intf_fxns;
+	struct sync_object **sync_events = NULL;
+	u32 i;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(strm_tab != NULL);
+	DBC_REQUIRE(pmask != NULL);
+	DBC_REQUIRE(strms > 0);
+
+	*pmask = 0;
+	for (i = 0; i < strms; i++) {
+		if (!strm_tab[i]) {
+			status = -EFAULT;
+			break;
+		}
+	}
+	if (status)
+		goto func_end;
+
+	/* Determine which channels have IO ready */
+	for (i = 0; i < strms; i++) {
+		intf_fxns = strm_tab[i]->strm_mgr_obj->intf_fxns;
+		status = (*intf_fxns->pfn_chnl_get_info) (strm_tab[i]->chnl_obj,
+							  &chnl_info_obj);
+		if (status) {
+			break;
+		} else {
+			if (chnl_info_obj.cio_cs > 0)
+				*pmask |= (1 << i);
+
+		}
+	}
+	if (!status && utimeout > 0 && *pmask == 0) {
+		/* Non-zero timeout */
+		sync_events = kmalloc(strms * sizeof(struct sync_object *),
+								GFP_KERNEL);
+
+		if (sync_events == NULL) {
+			status = -ENOMEM;
+		} else {
+			for (i = 0; i < strms; i++) {
+				intf_fxns =
+				    strm_tab[i]->strm_mgr_obj->intf_fxns;
+				status = (*intf_fxns->pfn_chnl_get_info)
+				    (strm_tab[i]->chnl_obj, &chnl_info_obj);
+				if (status)
+					break;
+				else
+					sync_events[i] =
+					    chnl_info_obj.sync_event;
+
+			}
+		}
+		if (!status) {
+			status =
+			    sync_wait_on_multiple_events(sync_events, strms,
+							 utimeout, &index);
+			if (!status) {
+				/* Since we waited on the event, we have to
+				 * reset it */
+				sync_set_event(sync_events[index]);
+				*pmask = 1 << index;
+			}
+		}
+	}
+func_end:
+	kfree(sync_events);
+
+	DBC_ENSURE((!status && (*pmask != 0 || utimeout == 0)) ||
+		   (status && *pmask == 0));
+
+	return status;
+}
+
+/*
+ *  ======== delete_strm ========
+ *  Purpose:
+ *      Frees the resources allocated for a stream.
+ */
+static int delete_strm(struct strm_object *stream_obj)
+{
+	struct bridge_drv_interface *intf_fxns;
+	int status = 0;
+
+	if (stream_obj) {
+		if (stream_obj->chnl_obj) {
+			intf_fxns = stream_obj->strm_mgr_obj->intf_fxns;
+			/* Channel close can fail only if the channel handle
+			 * is invalid. */
+			status = (*intf_fxns->pfn_chnl_close)
+					(stream_obj->chnl_obj);
+			/* Free all SM address translator resources */
+			if (!status) {
+				if (stream_obj->xlator) {
+					/* force free */
+					(void)cmm_xlator_delete(stream_obj->
+								xlator,
+								true);
+				}
+			}
+		}
+		kfree(stream_obj);
+	} else {
+		status = -EFAULT;
+	}
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/services/cfg.c b/drivers/staging/tidspbridge/services/cfg.c
new file mode 100644
index 00000000000..a7af74f482d
--- /dev/null
+++ b/drivers/staging/tidspbridge/services/cfg.c
@@ -0,0 +1,253 @@
+/*
+ * cfg.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Implementation of platform specific config services.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+
+/*  ----------------------------------- This */
+#include <dspbridge/cfg.h>
+#include <dspbridge/drv.h>
+
+struct drv_ext {
+	struct list_head link;
+	char sz_string[MAXREGPATHLENGTH];
+};
+
+/*
+ *  ======== cfg_exit ========
+ *  Purpose:
+ *      Discontinue usage of the CFG module.
+ */
+void cfg_exit(void)
+{
+	/* Do nothing */
+}
+
+/*
+ *  ======== cfg_get_auto_start ========
+ *  Purpose:
+ *      Retreive the autostart mask, if any, for this board.
+ */
+int cfg_get_auto_start(struct cfg_devnode *dev_node_obj,
+			      u32 *auto_start)
+{
+	int status = 0;
+	u32 dw_buf_size;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	dw_buf_size = sizeof(*auto_start);
+	if (!dev_node_obj)
+		status = -EFAULT;
+	if (!auto_start || !drv_datap)
+		status = -EFAULT;
+	if (!status)
+		*auto_start = (drv_datap->base_img) ? 1 : 0;
+
+	DBC_ENSURE((status == 0 &&
+		    (*auto_start == 0 || *auto_start == 1))
+		   || status != 0);
+	return status;
+}
+
+/*
+ *  ======== cfg_get_dev_object ========
+ *  Purpose:
+ *      Retrieve the Device Object handle for a given devnode.
+ */
+int cfg_get_dev_object(struct cfg_devnode *dev_node_obj,
+			      u32 *value)
+{
+	int status = 0;
+	u32 dw_buf_size;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	if (!drv_datap)
+		status = -EPERM;
+
+	if (!dev_node_obj)
+		status = -EFAULT;
+
+	if (!value)
+		status = -EFAULT;
+
+	dw_buf_size = sizeof(value);
+	if (!status) {
+
+		/* check the device string and then store dev object */
+		if (!
+		    (strcmp
+		     ((char *)((struct drv_ext *)dev_node_obj)->sz_string,
+		      "TIOMAP1510")))
+			*value = (u32)drv_datap->dev_object;
+	}
+	if (status)
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+	return status;
+}
+
+/*
+ *  ======== cfg_get_exec_file ========
+ *  Purpose:
+ *      Retreive the default executable, if any, for this board.
+ */
+int cfg_get_exec_file(struct cfg_devnode *dev_node_obj, u32 buf_size,
+			     char *str_exec_file)
+{
+	int status = 0;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	if (!dev_node_obj)
+		status = -EFAULT;
+
+	else if (!str_exec_file || !drv_datap)
+		status = -EFAULT;
+
+	if (strlen(drv_datap->base_img) > buf_size)
+		status = -EINVAL;
+
+	if (!status && drv_datap->base_img)
+		strcpy(str_exec_file, drv_datap->base_img);
+
+	if (status)
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+	DBC_ENSURE(((status == 0) &&
+		    (strlen(str_exec_file) <= buf_size))
+		   || (status != 0));
+	return status;
+}
+
+/*
+ *  ======== cfg_get_object ========
+ *  Purpose:
+ *      Retrieve the Object handle from the Registry
+ */
+int cfg_get_object(u32 *value, u8 dw_type)
+{
+	int status = -EINVAL;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	DBC_REQUIRE(value != NULL);
+
+	if (!drv_datap)
+		return -EPERM;
+
+	switch (dw_type) {
+	case (REG_DRV_OBJECT):
+		if (drv_datap->drv_object) {
+			*value = (u32)drv_datap->drv_object;
+			status = 0;
+		} else {
+			status = -ENODATA;
+		}
+		break;
+	case (REG_MGR_OBJECT):
+		if (drv_datap->mgr_object) {
+			*value = (u32)drv_datap->mgr_object;
+			status = 0;
+		} else {
+			status = -ENODATA;
+		}
+		break;
+
+	default:
+		break;
+	}
+	if (status) {
+		*value = 0;
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+	}
+	DBC_ENSURE((!status && *value != 0) || (status && *value == 0));
+	return status;
+}
+
+/*
+ *  ======== cfg_init ========
+ *  Purpose:
+ *      Initialize the CFG module's private state.
+ */
+bool cfg_init(void)
+{
+	return true;
+}
+
+/*
+ *  ======== cfg_set_dev_object ========
+ *  Purpose:
+ *      Store the Device Object handle and dev_node pointer for a given devnode.
+ */
+int cfg_set_dev_object(struct cfg_devnode *dev_node_obj, u32 value)
+{
+	int status = 0;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	if (!drv_datap) {
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+		return -EPERM;
+	}
+
+	if (!dev_node_obj)
+		status = -EFAULT;
+
+	if (!status) {
+		/* Store the Bridge device object in the Registry */
+
+		if (!(strcmp((char *)dev_node_obj, "TIOMAP1510")))
+			drv_datap->dev_object = (void *) value;
+	}
+	if (status)
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+
+	return status;
+}
+
+/*
+ *  ======== cfg_set_object ========
+ *  Purpose:
+ *      Store the Driver Object handle
+ */
+int cfg_set_object(u32 value, u8 dw_type)
+{
+	int status = -EINVAL;
+	struct drv_data *drv_datap = dev_get_drvdata(bridge);
+
+	if (!drv_datap)
+		return -EPERM;
+
+	switch (dw_type) {
+	case (REG_DRV_OBJECT):
+		drv_datap->drv_object = (void *)value;
+		status = 0;
+		break;
+	case (REG_MGR_OBJECT):
+		drv_datap->mgr_object = (void *)value;
+		status = 0;
+		break;
+	default:
+		break;
+	}
+	if (status)
+		pr_err("%s: Failed, status 0x%x\n", __func__, status);
+	return status;
+}
diff --git a/drivers/staging/tidspbridge/services/ntfy.c b/drivers/staging/tidspbridge/services/ntfy.c
new file mode 100644
index 00000000000..a2ea698be24
--- /dev/null
+++ b/drivers/staging/tidspbridge/services/ntfy.c
@@ -0,0 +1,31 @@
+/*
+ * ntfy.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Manage lists of notification events.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- This */
+#include <dspbridge/ntfy.h>
+
+int dsp_notifier_event(struct notifier_block *this, unsigned long event,
+			   void *data)
+{
+	struct  ntfy_event *ne = container_of(this, struct ntfy_event,
+							noti_block);
+	if (ne->event & event)
+		sync_set_event(&ne->sync_obj);
+	return NOTIFY_OK;
+}
+
diff --git a/drivers/staging/tidspbridge/services/services.c b/drivers/staging/tidspbridge/services/services.c
new file mode 100644
index 00000000000..6a7dd6f3ecb
--- /dev/null
+++ b/drivers/staging/tidspbridge/services/services.c
@@ -0,0 +1,70 @@
+/*
+ * services.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Provide SERVICES loading.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/types.h>
+
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/cfg.h>
+#include <dspbridge/ntfy.h>
+#include <dspbridge/sync.h>
+#include <dspbridge/clk.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/services.h>
+
+/*
+ *  ======== services_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ */
+void services_exit(void)
+{
+	cfg_exit();
+}
+
+/*
+ *  ======== services_init ========
+ *  Purpose:
+ *      Initializes SERVICES modules.
+ */
+bool services_init(void)
+{
+	bool ret = true;
+	bool fcfg;
+
+	/* Perform required initialization of SERVICES modules. */
+	fcfg = cfg_init();
+
+	ret = fcfg;
+
+	if (!ret) {
+		if (fcfg)
+			cfg_exit();
+	}
+
+	return ret;
+}
diff --git a/drivers/staging/tidspbridge/services/sync.c b/drivers/staging/tidspbridge/services/sync.c
new file mode 100644
index 00000000000..9010b37bf5b
--- /dev/null
+++ b/drivers/staging/tidspbridge/services/sync.c
@@ -0,0 +1,104 @@
+/*
+ * sync.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Synchronization services.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/sync.h>
+
+DEFINE_SPINLOCK(sync_lock);
+
+/**
+ * sync_set_event() - set or signal and specified event
+ * @event:	Event to be set..
+ *
+ * set the @event, if there is an thread waiting for the event
+ * it will be waken up, this function only wakes one thread.
+ */
+
+void sync_set_event(struct sync_object *event)
+{
+	spin_lock_bh(&sync_lock);
+	complete(&event->comp);
+	if (event->multi_comp)
+		complete(event->multi_comp);
+	spin_unlock_bh(&sync_lock);
+}
+
+/**
+ * sync_wait_on_multiple_events() - waits for multiple events to be set.
+ * @events:	Array of events to wait for them.
+ * @count:	number of elements of the array.
+ * @timeout	timeout on waiting for the evetns.
+ * @pu_index	index of the event set.
+ *
+ * This functios will wait until any of the array element is set or until
+ * timeout. In case of success the function will return 0 and
+ * @pu_index will store the index of the array element set or in case
+ * of timeout the function will return -ETIME or in case of
+ * interrupting by a signal it will return -EPERM.
+ */
+
+int sync_wait_on_multiple_events(struct sync_object **events,
+				     unsigned count, unsigned timeout,
+				     unsigned *index)
+{
+	unsigned i;
+	int status = -EPERM;
+	struct completion m_comp;
+
+	init_completion(&m_comp);
+
+	if (SYNC_INFINITE == timeout)
+		timeout = MAX_SCHEDULE_TIMEOUT;
+
+	spin_lock_bh(&sync_lock);
+	for (i = 0; i < count; i++) {
+		if (completion_done(&events[i]->comp)) {
+			INIT_COMPLETION(events[i]->comp);
+			*index = i;
+			spin_unlock_bh(&sync_lock);
+			status = 0;
+			goto func_end;
+		}
+	}
+
+	for (i = 0; i < count; i++)
+		events[i]->multi_comp = &m_comp;
+
+	spin_unlock_bh(&sync_lock);
+
+	if (!wait_for_completion_interruptible_timeout(&m_comp,
+					msecs_to_jiffies(timeout)))
+		status = -ETIME;
+
+	spin_lock_bh(&sync_lock);
+	for (i = 0; i < count; i++) {
+		if (completion_done(&events[i]->comp)) {
+			INIT_COMPLETION(events[i]->comp);
+			*index = i;
+			status = 0;
+		}
+		events[i]->multi_comp = NULL;
+	}
+	spin_unlock_bh(&sync_lock);
+func_end:
+	return status;
+}
+
diff --git a/drivers/staging/usbip/stub.h b/drivers/staging/usbip/stub.h
index 022d0649ac5..30dbfb6d16f 100644
--- a/drivers/staging/usbip/stub.h
+++ b/drivers/staging/usbip/stub.h
@@ -25,6 +25,11 @@
 #include <linux/module.h>
 #include <linux/net.h>
 
+#define STUB_BUSID_OTHER 0
+#define STUB_BUSID_REMOV 1
+#define STUB_BUSID_ADDED 2
+#define STUB_BUSID_ALLOC 3
+
 struct stub_device {
 	struct usb_interface *interface;
 	struct list_head list;
@@ -72,6 +77,14 @@ struct stub_unlink {
 	__u32 status;
 };
 
+#define BUSID_SIZE 20
+struct bus_id_priv {
+	char name[BUSID_SIZE];
+	char status;
+	int interf_count;
+	struct stub_device *sdev;
+	char shutdown_busid;
+};
 
 extern struct kmem_cache *stub_priv_cache;
 
@@ -91,5 +104,7 @@ void stub_rx_loop(struct usbip_task *);
 void stub_enqueue_ret_unlink(struct stub_device *, __u32, __u32);
 
 /* stub_main.c */
-int match_busid(const char *busid);
+struct bus_id_priv *get_busid_priv(const char *busid);
+int del_match_busid(char *busid);
+
 void stub_device_cleanup_urbs(struct stub_device *sdev);
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index 3f95605427a..b6b753a4934 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -393,11 +393,14 @@ static int stub_probe(struct usb_interface *interface,
 	struct stub_device *sdev = NULL;
 	const char *udev_busid = dev_name(interface->dev.parent);
 	int err = 0;
+	struct bus_id_priv *busid_priv;
 
 	dev_dbg(&interface->dev, "Enter\n");
 
 	/* check we should claim or not by busid_table */
-	if (match_busid(udev_busid)) {
+	busid_priv = get_busid_priv(udev_busid);
+	if (!busid_priv  || (busid_priv->status == STUB_BUSID_REMOV) ||
+			     (busid_priv->status == STUB_BUSID_OTHER)) {
 		dev_info(&interface->dev,
 			 "this device %s is not in match_busid table. skip!\n",
 			 udev_busid);
@@ -422,28 +425,80 @@ static int stub_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
+
+	if (busid_priv->status == STUB_BUSID_ALLOC) {
+		busid_priv->interf_count++;
+		sdev = busid_priv->sdev;
+		if (!sdev)
+			return -ENODEV;
+
+		dev_info(&interface->dev,
+		 "USB/IP Stub: register a new interface "
+		 "(bus %u dev %u ifn %u)\n", udev->bus->busnum, udev->devnum,
+		 interface->cur_altsetting->desc.bInterfaceNumber);
+
+		/* set private data to usb_interface */
+		usb_set_intfdata(interface, sdev);
+
+		err = stub_add_files(&interface->dev);
+		if (err) {
+			dev_err(&interface->dev, "create sysfs files for %s\n",
+				udev_busid);
+			usb_set_intfdata(interface, NULL);
+			busid_priv->interf_count--;
+
+			return err;
+		}
+
+		return 0;
+	}
+
 	/* ok. this is my device. */
 	sdev = stub_device_alloc(interface);
 	if (!sdev)
 		return -ENOMEM;
 
-	dev_info(&interface->dev, "USB/IP Stub: register a new interface "
+	dev_info(&interface->dev, "USB/IP Stub: register a new device "
 		 "(bus %u dev %u ifn %u)\n", udev->bus->busnum, udev->devnum,
 		 interface->cur_altsetting->desc.bInterfaceNumber);
 
+	busid_priv->interf_count = 0;
+	busid_priv->shutdown_busid = 0;
+
 	/* set private data to usb_interface */
 	usb_set_intfdata(interface, sdev);
+	busid_priv->interf_count++;
+
+	busid_priv->sdev = sdev;
 
 	err = stub_add_files(&interface->dev);
 	if (err) {
 		dev_err(&interface->dev, "create sysfs files for %s\n",
 			udev_busid);
+		usb_set_intfdata(interface, NULL);
+		busid_priv->interf_count = 0;
+
+		busid_priv->sdev = NULL;
+		stub_device_free(sdev);
 		return err;
 	}
+	busid_priv->status = STUB_BUSID_ALLOC;
 
 	return 0;
 }
 
+static void shutdown_busid(struct bus_id_priv *busid_priv)
+{
+	if (busid_priv->sdev && !busid_priv->shutdown_busid) {
+		busid_priv->shutdown_busid = 1;
+		usbip_event_add(&busid_priv->sdev->ud, SDEV_EVENT_REMOVED);
+
+		/* 2. wait for the stop of the event handler */
+		usbip_stop_eh(&busid_priv->sdev->ud);
+	}
+
+}
+
 
 /*
  * called in usb_disconnect() or usb_deregister()
@@ -451,10 +506,21 @@ static int stub_probe(struct usb_interface *interface,
  */
 static void stub_disconnect(struct usb_interface *interface)
 {
-	struct stub_device *sdev = usb_get_intfdata(interface);
+	struct stub_device *sdev;
+	const char *udev_busid = dev_name(interface->dev.parent);
+	struct bus_id_priv *busid_priv;
+
+	busid_priv = get_busid_priv(udev_busid);
 
 	usbip_udbg("Enter\n");
 
+	if (!busid_priv) {
+		BUG();
+		return;
+	}
+
+	sdev = usb_get_intfdata(interface);
+
 	/* get stub_device */
 	if (!sdev) {
 		err(" could not get device from inteface data");
@@ -464,22 +530,39 @@ static void stub_disconnect(struct usb_interface *interface)
 
 	usb_set_intfdata(interface, NULL);
 
-
 	/*
 	 * NOTE:
 	 * rx/tx threads are invoked for each usb_device.
 	 */
 	stub_remove_files(&interface->dev);
 
-	/* 1. shutdown the current connection */
-	usbip_event_add(&sdev->ud, SDEV_EVENT_REMOVED);
+	/*If usb reset called from event handler*/
+	if (busid_priv->sdev->ud.eh.thread == current) {
+		busid_priv->interf_count--;
+		return;
+	}
+
+	if (busid_priv->interf_count > 1) {
+		busid_priv->interf_count--;
+		shutdown_busid(busid_priv);
+		return;
+	}
+
+	busid_priv->interf_count = 0;
 
-	/* 2. wait for the stop of the event handler */
-	usbip_stop_eh(&sdev->ud);
+
+	/* 1. shutdown the current connection */
+	shutdown_busid(busid_priv);
 
 	/* 3. free sdev */
+	busid_priv->sdev = NULL;
 	stub_device_free(sdev);
 
-
+	if (busid_priv->status == STUB_BUSID_ALLOC) {
+		busid_priv->status = STUB_BUSID_ADDED;
+	} else {
+		busid_priv->status = STUB_BUSID_OTHER;
+		del_match_busid((char *)udev_busid);
+	}
 	usbip_udbg("bye\n");
 }
diff --git a/drivers/staging/usbip/stub_main.c b/drivers/staging/usbip/stub_main.c
index 6665cefe573..f3a40968aae 100644
--- a/drivers/staging/usbip/stub_main.c
+++ b/drivers/staging/usbip/stub_main.c
@@ -41,8 +41,7 @@ struct kmem_cache *stub_priv_cache;
  * remote host.
  */
 #define MAX_BUSID 16
-#define BUSID_SIZE 20
-static char busid_table[MAX_BUSID][BUSID_SIZE];
+static struct bus_id_priv busid_table[MAX_BUSID];
 static spinlock_t busid_table_lock;
 
 
@@ -53,8 +52,8 @@ int match_busid(const char *busid)
 	spin_lock(&busid_table_lock);
 
 	for (i = 0; i < MAX_BUSID; i++)
-		if (busid_table[i][0])
-			if (!strncmp(busid_table[i], busid, BUSID_SIZE)) {
+		if (busid_table[i].name[0])
+			if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
 				/* already registerd */
 				spin_unlock(&busid_table_lock);
 				return 0;
@@ -65,6 +64,25 @@ int match_busid(const char *busid)
 	return 1;
 }
 
+struct bus_id_priv *get_busid_priv(const char *busid)
+{
+	int i;
+
+	spin_lock(&busid_table_lock);
+
+	for (i = 0; i < MAX_BUSID; i++)
+		if (busid_table[i].name[0])
+			if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
+				/* already registerd */
+				spin_unlock(&busid_table_lock);
+				return &(busid_table[i]);
+			}
+
+	spin_unlock(&busid_table_lock);
+
+	return NULL;
+}
+
 static ssize_t show_match_busid(struct device_driver *drv, char *buf)
 {
 	int i;
@@ -73,8 +91,8 @@ static ssize_t show_match_busid(struct device_driver *drv, char *buf)
 	spin_lock(&busid_table_lock);
 
 	for (i = 0; i < MAX_BUSID; i++)
-		if (busid_table[i][0])
-			out += sprintf(out, "%s ", busid_table[i]);
+		if (busid_table[i].name[0])
+			out += sprintf(out, "%s ", busid_table[i].name);
 
 	spin_unlock(&busid_table_lock);
 
@@ -93,8 +111,11 @@ static int add_match_busid(char *busid)
 	spin_lock(&busid_table_lock);
 
 	for (i = 0; i < MAX_BUSID; i++)
-		if (!busid_table[i][0]) {
-			strncpy(busid_table[i], busid, BUSID_SIZE);
+		if (!busid_table[i].name[0]) {
+			strncpy(busid_table[i].name, busid, BUSID_SIZE);
+			if ((busid_table[i].status != STUB_BUSID_ALLOC) &&
+			    (busid_table[i].status != STUB_BUSID_REMOV))
+				busid_table[i].status = STUB_BUSID_ADDED;
 			spin_unlock(&busid_table_lock);
 			return 0;
 		}
@@ -104,16 +125,21 @@ static int add_match_busid(char *busid)
 	return -1;
 }
 
-static int del_match_busid(char *busid)
+int del_match_busid(char *busid)
 {
 	int i;
 
 	spin_lock(&busid_table_lock);
 
 	for (i = 0; i < MAX_BUSID; i++)
-		if (!strncmp(busid_table[i], busid, BUSID_SIZE)) {
+		if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
 			/* found */
-			memset(busid_table[i], 0, BUSID_SIZE);
+			if (busid_table[i].status == STUB_BUSID_OTHER)
+				memset(busid_table[i].name, 0, BUSID_SIZE);
+			if ((busid_table[i].status != STUB_BUSID_OTHER) &&
+			    (busid_table[i].status != STUB_BUSID_ADDED)) {
+				busid_table[i].status = STUB_BUSID_REMOV;
+			}
 			spin_unlock(&busid_table_lock);
 			return 0;
 		}
@@ -122,6 +148,20 @@ static int del_match_busid(char *busid)
 
 	return -1;
 }
+static void init_busid_table(void)
+{
+	int i;
+
+
+	for (i = 0; i < MAX_BUSID; i++) {
+		memset(busid_table[i].name, 0, BUSID_SIZE);
+		busid_table[i].status = STUB_BUSID_OTHER;
+		busid_table[i].interf_count = 0;
+		busid_table[i].sdev = NULL;
+		busid_table[i].shutdown_busid = 0;
+	}
+	spin_lock_init(&busid_table_lock);
+}
 
 static ssize_t store_match_busid(struct device_driver *dev, const char *buf,
 		size_t count)
@@ -261,8 +301,7 @@ static int __init usb_stub_init(void)
 	printk(KERN_INFO KBUILD_MODNAME ":"
 	       DRIVER_DESC ":" DRIVER_VERSION "\n");
 
-	memset(busid_table, 0, sizeof(busid_table));
-	spin_lock_init(&busid_table_lock);
+	init_busid_table();
 
 	ret = driver_create_file(&stub_driver.drvwrap.driver,
 				 &driver_attr_match_busid);
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c
index 5972ae70e38..3de6fd2539d 100644
--- a/drivers/staging/usbip/stub_rx.c
+++ b/drivers/staging/usbip/stub_rx.c
@@ -362,54 +362,16 @@ static struct stub_priv *stub_priv_alloc(struct stub_device *sdev,
 	return priv;
 }
 
-
-static struct usb_host_endpoint *get_ep_from_epnum(struct usb_device *udev,
-		int epnum0)
-{
-	struct usb_host_config *config;
-	int i = 0, j = 0;
-	struct usb_host_endpoint *ep = NULL;
-	int epnum;
-	int found = 0;
-
-	if (epnum0 == 0)
-		return &udev->ep0;
-
-	config = udev->actconfig;
-	if (!config)
-		return NULL;
-
-	for (i = 0; i < config->desc.bNumInterfaces; i++) {
-		struct usb_host_interface *setting;
-
-		setting = config->interface[i]->cur_altsetting;
-
-		for (j = 0; j < setting->desc.bNumEndpoints; j++) {
-			ep = &setting->endpoint[j];
-			epnum = (ep->desc.bEndpointAddress & 0x7f);
-
-			if (epnum == epnum0) {
-				/* usbip_uinfo("found epnum %d\n", epnum0);*/
-				found = 1;
-				break;
-			}
-		}
-	}
-
-	if (found)
-		return ep;
-	else
-		return NULL;
-}
-
-
 static int get_pipe(struct stub_device *sdev, int epnum, int dir)
 {
 	struct usb_device *udev = interface_to_usbdev(sdev->interface);
 	struct usb_host_endpoint *ep;
 	struct usb_endpoint_descriptor *epd = NULL;
 
-	ep = get_ep_from_epnum(udev, epnum);
+	if (dir == USBIP_DIR_IN)
+		ep = udev->ep_in[epnum & 0x7f];
+	else
+		ep = udev->ep_out[epnum & 0x7f];
 	if (!ep) {
 		dev_err(&sdev->interface->dev, "no such endpoint?, %d\n",
 			epnum);
@@ -462,6 +424,60 @@ static int get_pipe(struct stub_device *sdev, int epnum, int dir)
 	return 0;
 }
 
+static void masking_bogus_flags(struct urb *urb)
+{
+	int				xfertype;
+	struct usb_device		*dev;
+	struct usb_host_endpoint	*ep;
+	int				is_out;
+	unsigned int	allowed;
+
+	if (!urb || urb->hcpriv || !urb->complete)
+		return;
+	dev = urb->dev;
+	if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED))
+		return;
+
+	ep = (usb_pipein(urb->pipe) ? dev->ep_in : dev->ep_out)
+			[usb_pipeendpoint(urb->pipe)];
+	if (!ep)
+		return;
+
+	xfertype = usb_endpoint_type(&ep->desc);
+	if (xfertype == USB_ENDPOINT_XFER_CONTROL) {
+		struct usb_ctrlrequest *setup =
+				(struct usb_ctrlrequest *) urb->setup_packet;
+
+		if (!setup)
+			return;
+		is_out = !(setup->bRequestType & USB_DIR_IN) ||
+				!setup->wLength;
+	} else {
+		is_out = usb_endpoint_dir_out(&ep->desc);
+	}
+
+	/* enforce simple/standard policy */
+	allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT |
+		   URB_DIR_MASK | URB_FREE_BUFFER);
+	switch (xfertype) {
+	case USB_ENDPOINT_XFER_BULK:
+		if (is_out)
+			allowed |= URB_ZERO_PACKET;
+		/* FALLTHROUGH */
+	case USB_ENDPOINT_XFER_CONTROL:
+		allowed |= URB_NO_FSBR;	/* only affects UHCI */
+		/* FALLTHROUGH */
+	default:			/* all non-iso endpoints */
+		if (!is_out)
+			allowed |= URB_SHORT_NOT_OK;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		allowed |= URB_ISO_ASAP;
+		break;
+	}
+	urb->transfer_flags &= allowed;
+}
+
 static void stub_recv_cmd_submit(struct stub_device *sdev,
 				 struct usbip_header *pdu)
 {
@@ -528,6 +544,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev,
 	/* no need to submit an intercepted request, but harmless? */
 	tweak_special_requests(priv->urb);
 
+	masking_bogus_flags(priv->urb);
 	/* urb is now ready to submit */
 	ret = usb_submit_urb(priv->urb, GFP_KERNEL);
 
diff --git a/drivers/staging/usbip/usbip_common.h b/drivers/staging/usbip/usbip_common.h
index e1bbd1287e2..d280e234e06 100644
--- a/drivers/staging/usbip/usbip_common.h
+++ b/drivers/staging/usbip/usbip_common.h
@@ -172,7 +172,7 @@ struct usbip_header_basic {
 #define USBIP_RET_UNLINK	0x0004
 	__u32 command;
 
-	 /* sequencial number which identifies requests.
+	 /* sequential number which identifies requests.
 	  * incremented per connections */
 	__u32 seqnum;
 
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index 0f9ea58ff71..06bd793c52b 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -900,7 +900,8 @@ unsigned int ca91cx42_master_rmw(struct vme_master_resource *image,
 	/* Address must be 4-byte aligned */
 	if (pci_addr & 0x3) {
 		dev_err(dev, "RMW Address not 4-byte aligned\n");
-		return -EINVAL;
+		result = -EINVAL;
+		goto out;
 	}
 
 	/* Ensure RMW Disabled whilst configuring */
@@ -921,6 +922,7 @@ unsigned int ca91cx42_master_rmw(struct vme_master_resource *image,
 	/* Disable RMW */
 	iowrite32(0, bridge->base + SCYC_CTL);
 
+out:
 	spin_unlock(&(image->lock));
 
 	mutex_unlock(&(bridge->vme_rmw));
@@ -961,11 +963,11 @@ int ca91cx42_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 
 	if (dest->type == VME_DMA_VME) {
 		entry->descriptor.dctl |= CA91CX42_DCTL_L2V;
-		vme_attr = (struct vme_dma_vme *)dest->private;
-		pci_attr = (struct vme_dma_pci *)src->private;
+		vme_attr = dest->private;
+		pci_attr = src->private;
 	} else {
-		vme_attr = (struct vme_dma_vme *)src->private;
-		pci_attr = (struct vme_dma_pci *)dest->private;
+		vme_attr = src->private;
+		pci_attr = dest->private;
 	}
 
 	/* Check we can do fullfill required attributes */
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index f09cac16313..492ddb2d510 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -1649,7 +1649,7 @@ int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 	/* Fill out source part */
 	switch (src->type) {
 	case VME_DMA_PATTERN:
-		pattern_attr = (struct vme_dma_pattern *)src->private;
+		pattern_attr = src->private;
 
 		entry->descriptor.dsal = pattern_attr->pattern;
 		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PAT;
@@ -1663,7 +1663,7 @@ int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 
 		break;
 	case VME_DMA_PCI:
-		pci_attr = (struct vme_dma_pci *)src->private;
+		pci_attr = src->private;
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
@@ -1672,7 +1672,7 @@ int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 		entry->descriptor.dsat = TSI148_LCSR_DSAT_TYP_PCI;
 		break;
 	case VME_DMA_VME:
-		vme_attr = (struct vme_dma_vme *)src->private;
+		vme_attr = src->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
@@ -1701,7 +1701,7 @@ int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 	/* Fill out destination part */
 	switch (dest->type) {
 	case VME_DMA_PCI:
-		pci_attr = (struct vme_dma_pci *)dest->private;
+		pci_attr = dest->private;
 
 		reg_split((unsigned long long)pci_attr->address, &address_high,
 			&address_low);
@@ -1710,7 +1710,7 @@ int tsi148_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 		entry->descriptor.ddat = TSI148_LCSR_DDAT_TYP_PCI;
 		break;
 	case VME_DMA_VME:
-		vme_attr = (struct vme_dma_vme *)dest->private;
+		vme_attr = dest->private;
 
 		reg_split((unsigned long long)vme_attr->address, &address_high,
 			&address_low);
diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c
index bc16fc070fd..8f77bd24630 100644
--- a/drivers/staging/vme/devices/vme_user.c
+++ b/drivers/staging/vme/devices/vme_user.c
@@ -31,15 +31,16 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/syscalls.h>
-#include <linux/smp_lock.h>
+#include <linux/mutex.h>
 #include <linux/types.h>
 
-#include <asm/io.h>
-#include <asm/uaccess.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
 
 #include "../vme.h"
 #include "vme_user.h"
 
+static DEFINE_MUTEX(vme_user_mutex);
 static char driver_name[] = "vme_user";
 
 static int bus[USER_BUS_MAX];
@@ -48,19 +49,19 @@ static int bus_num;
 /* Currently Documentation/devices.txt defines the following for VME:
  *
  * 221 char	VME bus
- * 		  0 = /dev/bus/vme/m0		First master image
- * 		  1 = /dev/bus/vme/m1		Second master image
- * 		  2 = /dev/bus/vme/m2		Third master image
- * 		  3 = /dev/bus/vme/m3		Fourth master image
- * 		  4 = /dev/bus/vme/s0		First slave image
- * 		  5 = /dev/bus/vme/s1		Second slave image
- * 		  6 = /dev/bus/vme/s2		Third slave image
- * 		  7 = /dev/bus/vme/s3		Fourth slave image
- * 		  8 = /dev/bus/vme/ctl		Control
+ *		  0 = /dev/bus/vme/m0		First master image
+ *		  1 = /dev/bus/vme/m1		Second master image
+ *		  2 = /dev/bus/vme/m2		Third master image
+ *		  3 = /dev/bus/vme/m3		Fourth master image
+ *		  4 = /dev/bus/vme/s0		First slave image
+ *		  5 = /dev/bus/vme/s1		Second slave image
+ *		  6 = /dev/bus/vme/s2		Third slave image
+ *		  7 = /dev/bus/vme/s3		Fourth slave image
+ *		  8 = /dev/bus/vme/ctl		Control
  *
- * 		It is expected that all VME bus drivers will use the
- * 		same interface.  For interface documentation see
- * 		http://www.vmelinux.org/.
+ *		It is expected that all VME bus drivers will use the
+ *		same interface.  For interface documentation see
+ *		http://www.vmelinux.org/.
  *
  * However the VME driver at http://www.vmelinux.org/ is rather old and doesn't
  * even support the tsi148 chipset (which has 8 master and 8 slave windows).
@@ -137,12 +138,12 @@ static int __init vme_user_probe(struct device *, int, int);
 static int __exit vme_user_remove(struct device *, int, int);
 
 static struct file_operations vme_user_fops = {
-        .open = vme_user_open,
-        .release = vme_user_release,
-        .read = vme_user_read,
-        .write = vme_user_write,
-        .llseek = vme_user_llseek,
-        .unlocked_ioctl = vme_user_unlocked_ioctl,
+	.open = vme_user_open,
+	.release = vme_user_release,
+	.read = vme_user_read,
+	.write = vme_user_write,
+	.llseek = vme_user_llseek,
+	.unlocked_ioctl = vme_user_unlocked_ioctl,
 };
 
 
@@ -151,13 +152,13 @@ static struct file_operations vme_user_fops = {
  */
 static void reset_counters(void)
 {
-        statistics.reads = 0;
-        statistics.writes = 0;
-        statistics.ioctls = 0;
-        statistics.irqs = 0;
-        statistics.berrs = 0;
-        statistics.dmaErrors = 0;
-        statistics.timeouts = 0;
+	statistics.reads = 0;
+	statistics.writes = 0;
+	statistics.ioctls = 0;
+	statistics.irqs = 0;
+	statistics.berrs = 0;
+	statistics.dmaErrors = 0;
+	statistics.timeouts = 0;
 }
 
 static int vme_user_open(struct inode *inode, struct file *file)
@@ -216,21 +217,20 @@ static ssize_t resource_to_user(int minor, char __user *buf, size_t count,
 		/* We copy to kernel buffer */
 		copied = vme_master_read(image[minor].resource,
 			image[minor].kern_buf, count, *ppos);
-		if (copied < 0) {
+		if (copied < 0)
 			return (int)copied;
-		}
 
 		retval = __copy_to_user(buf, image[minor].kern_buf,
 			(unsigned long)copied);
 		if (retval != 0) {
 			copied = (copied - retval);
-			printk("User copy failed\n");
+			printk(KERN_INFO "User copy failed\n");
 			return -EINVAL;
 		}
 
 	} else {
 		/* XXX Need to write this */
-		printk("Currently don't support large transfers\n");
+		printk(KERN_INFO "Currently don't support large transfers\n");
 		/* Map in pages from userspace */
 
 		/* Call vme_master_read to do the transfer */
@@ -264,7 +264,7 @@ static ssize_t resource_from_user(unsigned int minor, const char *buf,
 			image[minor].kern_buf, copied, *ppos);
 	} else {
 		/* XXX Need to write this */
-		printk("Currently don't support large transfers\n");
+		printk(KERN_INFO "Currently don't support large transfers\n");
 		/* Map in pages from userspace */
 
 		/* Call vme_master_write to do the transfer */
@@ -313,7 +313,7 @@ static ssize_t buffer_from_user(unsigned int minor, const char *buf,
 }
 
 static ssize_t vme_user_read(struct file *file, char *buf, size_t count,
-			loff_t * ppos)
+			loff_t *ppos)
 {
 	unsigned int minor = MINOR(file->f_dentry->d_inode->i_rdev);
 	ssize_t retval;
@@ -337,7 +337,7 @@ static ssize_t vme_user_read(struct file *file, char *buf, size_t count,
 	else
 		okcount = count;
 
-	switch (type[minor]){
+	switch (type[minor]) {
 	case MASTER_MINOR:
 		retval = resource_to_user(minor, buf, okcount, ppos);
 		break;
@@ -380,7 +380,7 @@ static ssize_t vme_user_write(struct file *file, const char *buf, size_t count,
 	else
 		okcount = count;
 
-	switch (type[minor]){
+	switch (type[minor]) {
 	case MASTER_MINOR:
 		retval = resource_from_user(minor, buf, okcount, ppos);
 		break;
@@ -560,9 +560,9 @@ vme_user_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int ret;
 
-	lock_kernel();
+	mutex_lock(&vme_user_mutex);
 	ret = vme_user_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
-	unlock_kernel();
+	mutex_unlock(&vme_user_mutex);
 
 	return ret;
 }
@@ -571,7 +571,7 @@ vme_user_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 /*
  * Unallocate a previously allocated buffer
  */
-static void buf_unalloc (int num)
+static void buf_unalloc(int num)
 {
 	if (image[num].kern_buf) {
 #ifdef VME_DEBUG
@@ -594,8 +594,8 @@ static void buf_unalloc (int num)
 }
 
 static struct vme_driver vme_user_driver = {
-        .name = driver_name,
-        .probe = vme_user_probe,
+	.name = driver_name,
+	.probe = vme_user_probe,
 	.remove = vme_user_remove,
 };
 
@@ -770,16 +770,16 @@ static int __init vme_user_probe(struct device *dev, int cur_bus, int cur_slot)
 	}
 
 	/* Add sysfs Entries */
-	for (i=0; i<VME_DEVS; i++) {
+	for (i = 0; i < VME_DEVS; i++) {
 		switch (type[i]) {
 		case MASTER_MINOR:
-			sprintf(name,"bus/vme/m%%d");
+			sprintf(name, "bus/vme/m%%d");
 			break;
 		case CONTROL_MINOR:
-			sprintf(name,"bus/vme/ctl");
+			sprintf(name, "bus/vme/ctl");
 			break;
 		case SLAVE_MINOR:
-			sprintf(name,"bus/vme/s%%d");
+			sprintf(name, "bus/vme/s%%d");
 			break;
 		default:
 			err = -EINVAL;
@@ -790,9 +790,9 @@ static int __init vme_user_probe(struct device *dev, int cur_bus, int cur_slot)
 		image[i].device =
 			device_create(vme_user_sysfs_class, NULL,
 				MKDEV(VME_MAJOR, i), NULL, name,
-				(type[i] == SLAVE_MINOR)? i - (MASTER_MAX + 1) : i);
+				(type[i] == SLAVE_MINOR) ? i - (MASTER_MAX + 1) : i);
 		if (IS_ERR(image[i].device)) {
-			printk("%s: Error creating sysfs device\n",
+			printk(KERN_INFO "%s: Error creating sysfs device\n",
 				driver_name);
 			err = PTR_ERR(image[i].device);
 			goto err_sysfs;
@@ -804,7 +804,7 @@ static int __init vme_user_probe(struct device *dev, int cur_bus, int cur_slot)
 	/* Ensure counter set correcty to destroy all sysfs devices */
 	i = VME_DEVS;
 err_sysfs:
-	while (i > 0){
+	while (i > 0) {
 		i--;
 		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
 	}
@@ -845,9 +845,8 @@ static int __exit vme_user_remove(struct device *dev, int cur_bus, int cur_slot)
 	int i;
 
 	/* Remove sysfs Entries */
-	for(i=0; i<VME_DEVS; i++) {
+	for (i = 0; i < VME_DEVS; i++)
 		device_destroy(vme_user_sysfs_class, MKDEV(VME_MAJOR, i));
-	}
 	class_destroy(vme_user_sysfs_class);
 
 	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++)
diff --git a/drivers/staging/vt6655/80211hdr.h b/drivers/staging/vt6655/80211hdr.h
index b7b170e19aa..f55283b8641 100644
--- a/drivers/staging/vt6655/80211hdr.h
+++ b/drivers/staging/vt6655/80211hdr.h
@@ -161,21 +161,21 @@
 #ifdef __BIG_ENDIAN
 
 /* GET & SET Frame Control bit */
-#define WLAN_GET_FC_PRVER(n)    ((((WORD)(n) >> 8) & (BIT0 | BIT1))
-#define WLAN_GET_FC_FTYPE(n)    ((((WORD)(n) >> 8) & (BIT2 | BIT3)) >> 2)
-#define WLAN_GET_FC_FSTYPE(n)   ((((WORD)(n) >> 8) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
-#define WLAN_GET_FC_TODS(n)     ((((WORD)(n) << 8) & (BIT8)) >> 8)
-#define WLAN_GET_FC_FROMDS(n)   ((((WORD)(n) << 8) & (BIT9)) >> 9)
-#define WLAN_GET_FC_MOREFRAG(n) ((((WORD)(n) << 8) & (BIT10)) >> 10)
-#define WLAN_GET_FC_RETRY(n)    ((((WORD)(n) << 8) & (BIT11)) >> 11)
-#define WLAN_GET_FC_PWRMGT(n)   ((((WORD)(n) << 8) & (BIT12)) >> 12)
-#define WLAN_GET_FC_MOREDATA(n) ((((WORD)(n) << 8) & (BIT13)) >> 13)
-#define WLAN_GET_FC_ISWEP(n)    ((((WORD)(n) << 8) & (BIT14)) >> 14)
-#define WLAN_GET_FC_ORDER(n)    ((((WORD)(n) << 8) & (BIT15)) >> 15)
+#define WLAN_GET_FC_PRVER(n)    ((((unsigned short)(n) >> 8) & (BIT0 | BIT1))
+#define WLAN_GET_FC_FTYPE(n)    ((((unsigned short)(n) >> 8) & (BIT2 | BIT3)) >> 2)
+#define WLAN_GET_FC_FSTYPE(n)   ((((unsigned short)(n) >> 8) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
+#define WLAN_GET_FC_TODS(n)     ((((unsigned short)(n) << 8) & (BIT8)) >> 8)
+#define WLAN_GET_FC_FROMDS(n)   ((((unsigned short)(n) << 8) & (BIT9)) >> 9)
+#define WLAN_GET_FC_MOREFRAG(n) ((((unsigned short)(n) << 8) & (BIT10)) >> 10)
+#define WLAN_GET_FC_RETRY(n)    ((((unsigned short)(n) << 8) & (BIT11)) >> 11)
+#define WLAN_GET_FC_PWRMGT(n)   ((((unsigned short)(n) << 8) & (BIT12)) >> 12)
+#define WLAN_GET_FC_MOREDATA(n) ((((unsigned short)(n) << 8) & (BIT13)) >> 13)
+#define WLAN_GET_FC_ISWEP(n)    ((((unsigned short)(n) << 8) & (BIT14)) >> 14)
+#define WLAN_GET_FC_ORDER(n)    ((((unsigned short)(n) << 8) & (BIT15)) >> 15)
 
 /* Sequence Field bit */
-#define WLAN_GET_SEQ_FRGNUM(n) (((WORD)(n) >> 8) & (BIT0|BIT1|BIT2|BIT3))
-#define WLAN_GET_SEQ_SEQNUM(n) ((((WORD)(n) >> 8) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
+#define WLAN_GET_SEQ_FRGNUM(n) (((unsigned short)(n) >> 8) & (BIT0|BIT1|BIT2|BIT3))
+#define WLAN_GET_SEQ_SEQNUM(n) ((((unsigned short)(n) >> 8) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
 
 
 /* Capability Field bit */
@@ -196,22 +196,22 @@
 #else
 
 /* GET & SET Frame Control bit */
-#define WLAN_GET_FC_PRVER(n)    (((WORD)(n)) & (BIT0 | BIT1))
-#define WLAN_GET_FC_FTYPE(n)    ((((WORD)(n)) & (BIT2 | BIT3)) >> 2)
-#define WLAN_GET_FC_FSTYPE(n)   ((((WORD)(n)) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
-#define WLAN_GET_FC_TODS(n)     ((((WORD)(n)) & (BIT8)) >> 8)
-#define WLAN_GET_FC_FROMDS(n)   ((((WORD)(n)) & (BIT9)) >> 9)
-#define WLAN_GET_FC_MOREFRAG(n) ((((WORD)(n)) & (BIT10)) >> 10)
-#define WLAN_GET_FC_RETRY(n)    ((((WORD)(n)) & (BIT11)) >> 11)
-#define WLAN_GET_FC_PWRMGT(n)   ((((WORD)(n)) & (BIT12)) >> 12)
-#define WLAN_GET_FC_MOREDATA(n) ((((WORD)(n)) & (BIT13)) >> 13)
-#define WLAN_GET_FC_ISWEP(n)    ((((WORD)(n)) & (BIT14)) >> 14)
-#define WLAN_GET_FC_ORDER(n)    ((((WORD)(n)) & (BIT15)) >> 15)
+#define WLAN_GET_FC_PRVER(n)    (((unsigned short)(n)) & (BIT0 | BIT1))
+#define WLAN_GET_FC_FTYPE(n)    ((((unsigned short)(n)) & (BIT2 | BIT3)) >> 2)
+#define WLAN_GET_FC_FSTYPE(n)   ((((unsigned short)(n)) & (BIT4|BIT5|BIT6|BIT7)) >> 4)
+#define WLAN_GET_FC_TODS(n)     ((((unsigned short)(n)) & (BIT8)) >> 8)
+#define WLAN_GET_FC_FROMDS(n)   ((((unsigned short)(n)) & (BIT9)) >> 9)
+#define WLAN_GET_FC_MOREFRAG(n) ((((unsigned short)(n)) & (BIT10)) >> 10)
+#define WLAN_GET_FC_RETRY(n)    ((((unsigned short)(n)) & (BIT11)) >> 11)
+#define WLAN_GET_FC_PWRMGT(n)   ((((unsigned short)(n)) & (BIT12)) >> 12)
+#define WLAN_GET_FC_MOREDATA(n) ((((unsigned short)(n)) & (BIT13)) >> 13)
+#define WLAN_GET_FC_ISWEP(n)    ((((unsigned short)(n)) & (BIT14)) >> 14)
+#define WLAN_GET_FC_ORDER(n)    ((((unsigned short)(n)) & (BIT15)) >> 15)
 
 
 /* Sequence Field bit */
-#define WLAN_GET_SEQ_FRGNUM(n) (((WORD)(n)) & (BIT0|BIT1|BIT2|BIT3))
-#define WLAN_GET_SEQ_SEQNUM(n) ((((WORD)(n)) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
+#define WLAN_GET_SEQ_FRGNUM(n) (((unsigned short)(n)) & (BIT0|BIT1|BIT2|BIT3))
+#define WLAN_GET_SEQ_SEQNUM(n) ((((unsigned short)(n)) & (~(BIT0|BIT1|BIT2|BIT3))) >> 4)
 
 
 /* Capability Field bit */
@@ -246,20 +246,20 @@
 #define WLAN_SET_CAP_INFO_GRPACK(n)        ((n) << 14)
 
 
-#define WLAN_SET_FC_PRVER(n)    ((WORD)(n))
-#define WLAN_SET_FC_FTYPE(n)    (((WORD)(n)) << 2)
-#define WLAN_SET_FC_FSTYPE(n)   (((WORD)(n)) << 4)
-#define WLAN_SET_FC_TODS(n)     (((WORD)(n)) << 8)
-#define WLAN_SET_FC_FROMDS(n)   (((WORD)(n)) << 9)
-#define WLAN_SET_FC_MOREFRAG(n) (((WORD)(n)) << 10)
-#define WLAN_SET_FC_RETRY(n)    (((WORD)(n)) << 11)
-#define WLAN_SET_FC_PWRMGT(n)   (((WORD)(n)) << 12)
-#define WLAN_SET_FC_MOREDATA(n) (((WORD)(n)) << 13)
-#define WLAN_SET_FC_ISWEP(n)    (((WORD)(n)) << 14)
-#define WLAN_SET_FC_ORDER(n)    (((WORD)(n)) << 15)
+#define WLAN_SET_FC_PRVER(n)    ((unsigned short)(n))
+#define WLAN_SET_FC_FTYPE(n)    (((unsigned short)(n)) << 2)
+#define WLAN_SET_FC_FSTYPE(n)   (((unsigned short)(n)) << 4)
+#define WLAN_SET_FC_TODS(n)     (((unsigned short)(n)) << 8)
+#define WLAN_SET_FC_FROMDS(n)   (((unsigned short)(n)) << 9)
+#define WLAN_SET_FC_MOREFRAG(n) (((unsigned short)(n)) << 10)
+#define WLAN_SET_FC_RETRY(n)    (((unsigned short)(n)) << 11)
+#define WLAN_SET_FC_PWRMGT(n)   (((unsigned short)(n)) << 12)
+#define WLAN_SET_FC_MOREDATA(n) (((unsigned short)(n)) << 13)
+#define WLAN_SET_FC_ISWEP(n)    (((unsigned short)(n)) << 14)
+#define WLAN_SET_FC_ORDER(n)    (((unsigned short)(n)) << 15)
 
-#define WLAN_SET_SEQ_FRGNUM(n) ((WORD)(n))
-#define WLAN_SET_SEQ_SEQNUM(n) (((WORD)(n)) << 4)
+#define WLAN_SET_SEQ_FRGNUM(n) ((unsigned short)(n))
+#define WLAN_SET_SEQ_SEQNUM(n) (((unsigned short)(n)) << 4)
 
 /* ERP Field bit */
 
@@ -282,50 +282,50 @@
 #define WLAN_MGMT_GET_TIM_OFFSET(b)     (((b) & ~BIT0) >> 1)
 
 /* 3-Addr & 4-Addr */
-#define WLAN_HDR_A3_DATA_PTR(p) (((PBYTE)(p)) + WLAN_HDR_ADDR3_LEN)
-#define WLAN_HDR_A4_DATA_PTR(p) (((PBYTE)(p)) + WLAN_HDR_ADDR4_LEN)
+#define WLAN_HDR_A3_DATA_PTR(p) (((unsigned char *)(p)) + WLAN_HDR_ADDR3_LEN)
+#define WLAN_HDR_A4_DATA_PTR(p) (((unsigned char *)(p)) + WLAN_HDR_ADDR4_LEN)
 
 /* IEEE ADDR */
 #define IEEE_ADDR_UNIVERSAL         0x02
 #define IEEE_ADDR_GROUP             0x01
 
 typedef struct {
-    BYTE            abyAddr[6];
+    unsigned char abyAddr[6];
 } IEEE_ADDR, *PIEEE_ADDR;
 
 /* 802.11 Header Format */
 
 typedef struct tagWLAN_80211HDR_A2 {
 
-    WORD    wFrameCtl;
-    WORD    wDurationID;
-    BYTE    abyAddr1[WLAN_ADDR_LEN];
-    BYTE    abyAddr2[WLAN_ADDR_LEN];
+    unsigned short wFrameCtl;
+    unsigned short wDurationID;
+    unsigned char abyAddr1[WLAN_ADDR_LEN];
+    unsigned char abyAddr2[WLAN_ADDR_LEN];
 
 } __attribute__ ((__packed__))
 WLAN_80211HDR_A2, *PWLAN_80211HDR_A2;
 
 typedef struct tagWLAN_80211HDR_A3 {
 
-    WORD    wFrameCtl;
-    WORD    wDurationID;
-    BYTE    abyAddr1[WLAN_ADDR_LEN];
-    BYTE    abyAddr2[WLAN_ADDR_LEN];
-    BYTE    abyAddr3[WLAN_ADDR_LEN];
-    WORD    wSeqCtl;
+    unsigned short wFrameCtl;
+    unsigned short wDurationID;
+    unsigned char abyAddr1[WLAN_ADDR_LEN];
+    unsigned char abyAddr2[WLAN_ADDR_LEN];
+    unsigned char abyAddr3[WLAN_ADDR_LEN];
+    unsigned short wSeqCtl;
 
 }__attribute__ ((__packed__))
 WLAN_80211HDR_A3, *PWLAN_80211HDR_A3;
 
 typedef struct tagWLAN_80211HDR_A4 {
 
-    WORD    wFrameCtl;
-    WORD    wDurationID;
-    BYTE    abyAddr1[WLAN_ADDR_LEN];
-    BYTE    abyAddr2[WLAN_ADDR_LEN];
-    BYTE    abyAddr3[WLAN_ADDR_LEN];
-    WORD    wSeqCtl;
-    BYTE    abyAddr4[WLAN_ADDR_LEN];
+    unsigned short wFrameCtl;
+    unsigned short wDurationID;
+    unsigned char abyAddr1[WLAN_ADDR_LEN];
+    unsigned char abyAddr2[WLAN_ADDR_LEN];
+    unsigned char abyAddr3[WLAN_ADDR_LEN];
+    unsigned short wSeqCtl;
+    unsigned char abyAddr4[WLAN_ADDR_LEN];
 
 } __attribute__ ((__packed__))
 WLAN_80211HDR_A4, *PWLAN_80211HDR_A4;
diff --git a/drivers/staging/vt6655/80211mgr.c b/drivers/staging/vt6655/80211mgr.c
index 38697c86248..1ed0f260b16 100644
--- a/drivers/staging/vt6655/80211mgr.c
+++ b/drivers/staging/vt6655/80211mgr.c
@@ -99,9 +99,9 @@ vMgrEncodeBeacon(
     // Fixed Fields
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_BEACON_OFF_TS);
-    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwBeaconInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_BEACON_OFF_BCN_INT);
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_BEACON_OFF_CAPINFO);
 
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_BEACON_OFF_SSID;
@@ -133,15 +133,15 @@ vMgrDecodeBeacon(
     // Fixed Fields
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_BEACON_OFF_TS);
-    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwBeaconInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_BEACON_OFF_BCN_INT);
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_BEACON_OFF_CAPINFO);
 
     // Information elements
-    pItem = (PWLAN_IE)((PBYTE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)))
+    pItem = (PWLAN_IE)((unsigned char *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)))
                        + WLAN_BEACON_OFF_SSID);
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ){
+    while( ((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len) ){
 
         switch (pItem->byElementID) {
             case WLAN_EID_SSID:
@@ -179,7 +179,7 @@ vMgrDecodeBeacon(
                 break;
             case WLAN_EID_RSN_WPA:
                 if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == true)
                         pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
                 }
                 break;
@@ -223,7 +223,7 @@ vMgrDecodeBeacon(
                 break;
 
         }
-        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+        pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 + pItem->len);
     }
 
     return;
@@ -296,7 +296,7 @@ vMgrEncodeDisassociation(
 
 
     // Fixed Fields
-    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwReason = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DISASSOC_OFF_REASON);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DISASSOC_OFF_REASON + sizeof(*(pFrame->pwReason));
 
@@ -323,7 +323,7 @@ vMgrDecodeDisassociation(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwReason = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DISASSOC_OFF_REASON);
 
     return;
@@ -348,9 +348,9 @@ vMgrEncodeAssocRequest(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_CAP_INFO);
-    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwListenInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_ASSOCREQ_OFF_LISTEN_INT);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_ASSOCREQ_OFF_LISTEN_INT + sizeof(*(pFrame->pwListenInterval));
     return;
@@ -377,16 +377,16 @@ vMgrDecodeAssocRequest(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_CAP_INFO);
-    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwListenInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_LISTEN_INT);
 
     // Information elements
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_ASSOCREQ_OFF_SSID);
 
-    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
+    while (((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) {
         switch (pItem->byElementID){
             case WLAN_EID_SSID:
                 if (pFrame->pSSID == NULL)
@@ -404,7 +404,7 @@ vMgrDecodeAssocRequest(
                 break;
             case WLAN_EID_RSN_WPA:
                 if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == true)
                         pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
                 }
                 break;
@@ -418,7 +418,7 @@ vMgrDecodeAssocRequest(
                         pItem->byElementID);
                 break;
         }
-        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+        pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 + pItem->len);
     }
     return;
 }
@@ -442,11 +442,11 @@ vMgrEncodeAssocResponse(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCRESP_OFF_CAP_INFO);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_ASSOCRESP_OFF_STATUS);
-    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAid = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_ASSOCRESP_OFF_AID);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_ASSOCRESP_OFF_AID
                   + sizeof(*(pFrame->pwAid));
@@ -476,11 +476,11 @@ vMgrDecodeAssocResponse(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCRESP_OFF_CAP_INFO);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_ASSOCRESP_OFF_STATUS);
-    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAid = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_ASSOCRESP_OFF_AID);
 
     // Information elements
@@ -488,9 +488,10 @@ vMgrDecodeAssocResponse(
                            + WLAN_ASSOCRESP_OFF_SUPP_RATES);
 
     pItem = (PWLAN_IE)(pFrame->pSuppRates);
-    pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+    pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 + pItem->len);
 
-    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
+    if ((((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) &&
+		    (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
         pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pFrame->pExtSuppRates=[%p].\n", pItem);
     }
@@ -520,9 +521,9 @@ vMgrEncodeReassocRequest(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCREQ_OFF_CAP_INFO);
-    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwListenInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_REASSOCREQ_OFF_LISTEN_INT);
     pFrame->pAddrCurrAP = (PIEEE_ADDR)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_REASSOCREQ_OFF_CURR_AP);
@@ -553,9 +554,9 @@ vMgrDecodeReassocRequest(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCREQ_OFF_CAP_INFO);
-    pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwListenInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_REASSOCREQ_OFF_LISTEN_INT);
     pFrame->pAddrCurrAP = (PIEEE_ADDR)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_REASSOCREQ_OFF_CURR_AP);
@@ -564,7 +565,7 @@ vMgrDecodeReassocRequest(
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_REASSOCREQ_OFF_SSID);
 
-    while(((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
+    while(((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) {
 
         switch (pItem->byElementID){
             case WLAN_EID_SSID:
@@ -583,7 +584,7 @@ vMgrDecodeReassocRequest(
                 break;
             case WLAN_EID_RSN_WPA:
                 if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == true)
                         pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
                 }
                 break;
@@ -597,7 +598,7 @@ vMgrDecodeReassocRequest(
                             pItem->byElementID);
                 break;
         }
-        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+        pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 + pItem->len);
     }
     return;
 }
@@ -649,7 +650,7 @@ vMgrDecodeProbeRequest(
     // Information elements
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)));
 
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+    while( ((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len) ) {
 
         switch (pItem->byElementID) {
             case WLAN_EID_SSID:
@@ -672,7 +673,7 @@ vMgrDecodeProbeRequest(
                 break;
         }
 
-        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
+        pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 +  pItem->len);
     }
     return;
 }
@@ -700,9 +701,9 @@ vMgrEncodeProbeResponse(
     // Fixed Fields
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_PROBERESP_OFF_TS);
-    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwBeaconInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_PROBERESP_OFF_BCN_INT);
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_PROBERESP_OFF_CAP_INFO);
 
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_PROBERESP_OFF_CAP_INFO +
@@ -737,16 +738,16 @@ vMgrDecodeProbeResponse(
     // Fixed Fields
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_PROBERESP_OFF_TS);
-    pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwBeaconInterval = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_PROBERESP_OFF_BCN_INT);
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_PROBERESP_OFF_CAP_INFO);
 
     // Information elements
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_PROBERESP_OFF_SSID);
 
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+    while( ((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len) ) {
         switch (pItem->byElementID) {
             case WLAN_EID_SSID:
                 if (pFrame->pSSID == NULL)
@@ -778,7 +779,7 @@ vMgrDecodeProbeResponse(
                 break;
             case WLAN_EID_RSN_WPA:
                 if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == true)
                         pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
                 }
                 break;
@@ -821,7 +822,7 @@ vMgrDecodeProbeResponse(
                 break;
         }
 
-        pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
+        pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 +  pItem->len);
     }
     return;
 }
@@ -846,11 +847,11 @@ vMgrEncodeAuthen(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAuthAlgorithm = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_AUTHEN_OFF_AUTH_ALG);
-    pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAuthSequence = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                      + WLAN_AUTHEN_OFF_AUTH_SEQ);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_AUTHEN_OFF_STATUS);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_AUTHEN_OFF_STATUS + sizeof(*(pFrame->pwStatus));
 
@@ -879,18 +880,18 @@ vMgrDecodeAuthen(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAuthAlgorithm = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_AUTHEN_OFF_AUTH_ALG);
-    pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAuthSequence = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                      + WLAN_AUTHEN_OFF_AUTH_SEQ);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_AUTHEN_OFF_STATUS);
 
     // Information elements
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_AUTHEN_OFF_CHALLENGE);
 
-    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE)) {
+    if ((((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE)) {
         pFrame->pChallenge = (PWLAN_IE_CHALLENGE)pItem;
     }
 
@@ -917,7 +918,7 @@ vMgrEncodeDeauthen(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwReason = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DEAUTHEN_OFF_REASON);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DEAUTHEN_OFF_REASON + sizeof(*(pFrame->pwReason));
 
@@ -944,7 +945,7 @@ vMgrDecodeDeauthen(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwReason = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DEAUTHEN_OFF_REASON);
 
     return;
@@ -970,11 +971,11 @@ vMgrEncodeReassocResponse(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCRESP_OFF_CAP_INFO);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_REASSOCRESP_OFF_STATUS);
-    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAid = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_REASSOCRESP_OFF_AID);
 
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_REASSOCRESP_OFF_AID + sizeof(*(pFrame->pwAid));
@@ -1005,11 +1006,11 @@ vMgrDecodeReassocResponse(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
     // Fixed Fields
-    pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwCapInfo = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCRESP_OFF_CAP_INFO);
-    pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwStatus = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_REASSOCRESP_OFF_STATUS);
-    pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
+    pFrame->pwAid = (unsigned short *)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_REASSOCRESP_OFF_AID);
 
     //Information elements
@@ -1017,9 +1018,10 @@ vMgrDecodeReassocResponse(
                                                + WLAN_REASSOCRESP_OFF_SUPP_RATES);
 
     pItem = (PWLAN_IE)(pFrame->pSuppRates);
-    pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
+    pItem = (PWLAN_IE)(((unsigned char *)pItem) + 2 + pItem->len);
 
-    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
+    if ((((unsigned char *)pItem) < (pFrame->pBuf + pFrame->len)) &&
+		    (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
         pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
     }
     return;
diff --git a/drivers/staging/vt6655/80211mgr.h b/drivers/staging/vt6655/80211mgr.h
index 658fe144f89..3bdab3f56f1 100644
--- a/drivers/staging/vt6655/80211mgr.h
+++ b/drivers/staging/vt6655/80211mgr.h
@@ -19,7 +19,7 @@
  *
  * File: 80211mgr.h
  *
- * Purpose: 802.11 managment frames pre-defines.
+ * Purpose: 802.11 management frames pre-defines.
  *
  *
  * Author: Lyndon Chen
@@ -230,8 +230,8 @@
 
 #pragma pack(1)
 typedef struct tagWLAN_IE {
-    BYTE   byElementID;
-    BYTE   len;
+    unsigned char byElementID;
+    unsigned char len;
 }__attribute__ ((__packed__))
 WLAN_IE, *PWLAN_IE;
 
@@ -239,9 +239,9 @@ WLAN_IE, *PWLAN_IE;
 // Service Set Identity (SSID)
 #pragma pack(1)
 typedef struct tagWLAN_IE_SSID {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   abySSID[1];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abySSID[1];
 }__attribute__ ((__packed__))
 WLAN_IE_SSID, *PWLAN_IE_SSID;
 
@@ -249,9 +249,9 @@ WLAN_IE_SSID, *PWLAN_IE_SSID;
 // Supported Rates
 #pragma pack(1)
 typedef struct tagWLAN_IE_SUPP_RATES {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   abyRates[1];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyRates[1];
 }__attribute__ ((__packed__))
 WLAN_IE_SUPP_RATES,  *PWLAN_IE_SUPP_RATES;
 
@@ -260,20 +260,20 @@ WLAN_IE_SUPP_RATES,  *PWLAN_IE_SUPP_RATES;
 // FH Parameter Set
 #pragma pack(1)
 typedef struct _WLAN_IE_FH_PARMS {
-    BYTE    byElementID;
-    BYTE    len;
-    WORD    wDwellTime;
-    BYTE    byHopSet;
-    BYTE    byHopPattern;
-    BYTE    byHopIndex;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned short wDwellTime;
+    unsigned char byHopSet;
+    unsigned char byHopPattern;
+    unsigned char byHopIndex;
 } WLAN_IE_FH_PARMS,  *PWLAN_IE_FH_PARMS;
 
 // DS Parameter Set
 #pragma pack(1)
 typedef struct tagWLAN_IE_DS_PARMS {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   byCurrChannel;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byCurrChannel;
 }__attribute__ ((__packed__))
 WLAN_IE_DS_PARMS,  *PWLAN_IE_DS_PARMS;
 
@@ -281,12 +281,12 @@ WLAN_IE_DS_PARMS,  *PWLAN_IE_DS_PARMS;
 // CF Parameter Set
 #pragma pack(1)
 typedef struct tagWLAN_IE_CF_PARMS {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   byCFPCount;
-    BYTE   byCFPPeriod;
-    WORD   wCFPMaxDuration;
-    WORD   wCFPDurRemaining;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byCFPCount;
+    unsigned char byCFPPeriod;
+    unsigned short wCFPMaxDuration;
+    unsigned short wCFPDurRemaining;
 }__attribute__ ((__packed__))
 WLAN_IE_CF_PARMS,  *PWLAN_IE_CF_PARMS;
 
@@ -294,12 +294,12 @@ WLAN_IE_CF_PARMS,  *PWLAN_IE_CF_PARMS;
 // TIM
 #pragma pack(1)
 typedef struct tagWLAN_IE_TIM {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   byDTIMCount;
-    BYTE   byDTIMPeriod;
-    BYTE   byBitMapCtl;
-    BYTE   byVirtBitMap[1];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byDTIMCount;
+    unsigned char byDTIMPeriod;
+    unsigned char byBitMapCtl;
+    unsigned char byVirtBitMap[1];
 }__attribute__ ((__packed__))
 WLAN_IE_TIM,  *PWLAN_IE_TIM;
 
@@ -307,9 +307,9 @@ WLAN_IE_TIM,  *PWLAN_IE_TIM;
 // IBSS Parameter Set
 #pragma pack(1)
 typedef struct tagWLAN_IE_IBSS_PARMS {
-    BYTE   byElementID;
-    BYTE   len;
-    WORD   wATIMWindow;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned short wATIMWindow;
 }__attribute__ ((__packed__))
 WLAN_IE_IBSS_PARMS, *PWLAN_IE_IBSS_PARMS;
 
@@ -317,84 +317,84 @@ WLAN_IE_IBSS_PARMS, *PWLAN_IE_IBSS_PARMS;
 // Challenge Text
 #pragma pack(1)
 typedef struct tagWLAN_IE_CHALLENGE {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   abyChallenge[1];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyChallenge[1];
 }__attribute__ ((__packed__))
 WLAN_IE_CHALLENGE,  *PWLAN_IE_CHALLENGE;
 
 
 #pragma pack(1)
 typedef struct tagWLAN_IE_RSN_EXT {
-    BYTE byElementID;
-    BYTE len;
-    BYTE abyOUI[4];
-    WORD wVersion;
-    BYTE abyMulticast[4];
-    WORD wPKCount;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyOUI[4];
+    unsigned short wVersion;
+    unsigned char abyMulticast[4];
+    unsigned short wPKCount;
     struct {
-        BYTE abyOUI[4];
+        unsigned char abyOUI[4];
     } PKSList[1]; // the rest is variable so need to
     // overlay ieauth structure
 } WLAN_IE_RSN_EXT, *PWLAN_IE_RSN_EXT;
 
 #pragma pack(1)
 typedef struct tagWLAN_IE_RSN_AUTH {
-    WORD wAuthCount;
+    unsigned short wAuthCount;
     struct {
-        BYTE abyOUI[4];
+        unsigned char abyOUI[4];
     } AuthKSList[1];
 } WLAN_IE_RSN_AUTH, *PWLAN_IE_RSN_AUTH;
 
 // RSN Identity
 #pragma pack(1)
 typedef struct tagWLAN_IE_RSN {
-    BYTE   byElementID;
-    BYTE   len;
-    WORD   wVersion;
-    BYTE   abyRSN[WLAN_MIN_ARRAY];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned short wVersion;
+    unsigned char abyRSN[WLAN_MIN_ARRAY];
 } WLAN_IE_RSN, *PWLAN_IE_RSN;
 
 
 // ERP
 #pragma pack(1)
 typedef struct tagWLAN_IE_ERP {
-    BYTE   byElementID;
-    BYTE   len;
-    BYTE   byContext;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byContext;
 }__attribute__ ((__packed__))
 WLAN_IE_ERP,  *PWLAN_IE_ERP;
 
 
 #pragma pack(1)
 typedef struct _MEASEURE_REQ {
-    BYTE                byChannel;
-    BYTE                abyStartTime[8];
-    BYTE                abyDuration[2];
+    unsigned char byChannel;
+    unsigned char abyStartTime[8];
+    unsigned char abyDuration[2];
 } MEASEURE_REQ, *PMEASEURE_REQ,
   MEASEURE_REQ_BASIC, *PMEASEURE_REQ_BASIC,
   MEASEURE_REQ_CCA, *PMEASEURE_REQ_CCA,
   MEASEURE_REQ_RPI, *PMEASEURE_REQ_RPI;
 
 typedef struct _MEASEURE_REP_BASIC {
-    BYTE                byChannel;
-    BYTE                abyStartTime[8];
-    BYTE                abyDuration[2];
-    BYTE                byMap;
+    unsigned char byChannel;
+    unsigned char abyStartTime[8];
+    unsigned char abyDuration[2];
+    unsigned char byMap;
 } MEASEURE_REP_BASIC, *PMEASEURE_REP_BASIC;
 
 typedef struct _MEASEURE_REP_CCA {
-    BYTE                byChannel;
-    BYTE                abyStartTime[8];
-    BYTE                abyDuration[2];
-    BYTE                byCCABusyFraction;
+    unsigned char byChannel;
+    unsigned char abyStartTime[8];
+    unsigned char abyDuration[2];
+    unsigned char byCCABusyFraction;
 } MEASEURE_REP_CCA, *PMEASEURE_REP_CCA;
 
 typedef struct _MEASEURE_REP_RPI {
-    BYTE                byChannel;
-    BYTE                abyStartTime[8];
-    BYTE                abyDuration[2];
-    BYTE                abyRPIdensity[8];
+    unsigned char byChannel;
+    unsigned char abyStartTime[8];
+    unsigned char abyDuration[2];
+    unsigned char abyRPIdensity[8];
 } MEASEURE_REP_RPI, *PMEASEURE_REP_RPI;
 
 typedef union _MEASEURE_REP {
@@ -406,85 +406,85 @@ typedef union _MEASEURE_REP {
 } MEASEURE_REP, *PMEASEURE_REP;
 
 typedef struct _WLAN_IE_MEASURE_REQ {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byToken;
-    BYTE                byMode;
-    BYTE                byType;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byToken;
+    unsigned char byMode;
+    unsigned char byType;
     MEASEURE_REQ        sReq;
 } WLAN_IE_MEASURE_REQ, *PWLAN_IE_MEASURE_REQ;
 
 typedef struct _WLAN_IE_MEASURE_REP {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byToken;
-    BYTE                byMode;
-    BYTE                byType;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byToken;
+    unsigned char byMode;
+    unsigned char byType;
     MEASEURE_REP        sRep;
 } WLAN_IE_MEASURE_REP, *PWLAN_IE_MEASURE_REP;
 
 typedef struct _WLAN_IE_CH_SW {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byMode;
-    BYTE                byChannel;
-    BYTE                byCount;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byMode;
+    unsigned char byChannel;
+    unsigned char byCount;
 } WLAN_IE_CH_SW, *PWLAN_IE_CH_SW;
 
 typedef struct _WLAN_IE_QUIET {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byQuietCount;
-    BYTE                byQuietPeriod;
-    BYTE                abyQuietDuration[2];
-    BYTE                abyQuietOffset[2];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byQuietCount;
+    unsigned char byQuietPeriod;
+    unsigned char abyQuietDuration[2];
+    unsigned char abyQuietOffset[2];
 } WLAN_IE_QUIET, *PWLAN_IE_QUIET;
 
 typedef struct _WLAN_IE_COUNTRY {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                abyCountryString[3];
-    BYTE                abyCountryInfo[3];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyCountryString[3];
+    unsigned char abyCountryInfo[3];
 } WLAN_IE_COUNTRY, *PWLAN_IE_COUNTRY;
 
 typedef struct _WLAN_IE_PW_CONST {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byPower;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byPower;
 } WLAN_IE_PW_CONST, *PWLAN_IE_PW_CONST;
 
 typedef struct _WLAN_IE_PW_CAP {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byMinPower;
-    BYTE                byMaxPower;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byMinPower;
+    unsigned char byMaxPower;
 } WLAN_IE_PW_CAP, *PWLAN_IE_PW_CAP;
 
 typedef struct _WLAN_IE_SUPP_CH {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                abyChannelTuple[2];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyChannelTuple[2];
 } WLAN_IE_SUPP_CH, *PWLAN_IE_SUPP_CH;
 
 typedef struct _WLAN_IE_TPC_REQ {
-    BYTE                byElementID;
-    BYTE                len;
+    unsigned char byElementID;
+    unsigned char len;
 } WLAN_IE_TPC_REQ, *PWLAN_IE_TPC_REQ;
 
 typedef struct _WLAN_IE_TPC_REP {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                byTxPower;
-    BYTE                byLinkMargin;
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char byTxPower;
+    unsigned char byLinkMargin;
 } WLAN_IE_TPC_REP, *PWLAN_IE_TPC_REP;
 
 
 typedef struct _WLAN_IE_IBSS_DFS {
-    BYTE                byElementID;
-    BYTE                len;
-    BYTE                abyDFSOwner[6];
-    BYTE                byDFSRecovery;
-    BYTE                abyChannelMap[2];
+    unsigned char byElementID;
+    unsigned char len;
+    unsigned char abyDFSOwner[6];
+    unsigned char byDFSRecovery;
+    unsigned char abyChannelMap[2];
 } WLAN_IE_IBSS_DFS, *PWLAN_IE_IBSS_DFS;
 
 #pragma pack()
@@ -495,9 +495,9 @@ typedef struct _WLAN_IE_IBSS_DFS {
 // prototype structure, all mgmt frame types will start with these members
 typedef struct tagWLAN_FR_MGMT {
 
-    UINT                  uType;
-    UINT                  len;
-    PBYTE                 pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR       pHdr;
 
 } WLAN_FR_MGMT,  *PWLAN_FR_MGMT;
@@ -505,14 +505,14 @@ typedef struct tagWLAN_FR_MGMT {
 // Beacon frame
 typedef struct tagWLAN_FR_BEACON {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     // fixed fields
     PQWORD                  pqwTimestamp;
-    PWORD                   pwBeaconInterval;
-    PWORD                   pwCapInfo;
+    unsigned short *pwBeaconInterval;
+    unsigned short *pwCapInfo;
     /*-- info elements ----------*/
     PWLAN_IE_SSID           pSSID;
     PWLAN_IE_SUPP_RATES     pSuppRates;
@@ -537,9 +537,9 @@ typedef struct tagWLAN_FR_BEACON {
 // IBSS ATIM frame
 typedef struct tagWLAN_FR_IBSSATIM {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
 
     // fixed fields
@@ -551,12 +551,12 @@ typedef struct tagWLAN_FR_IBSSATIM {
 // Disassociation
 typedef struct tagWLAN_FR_DISASSOC {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwReason;
+    unsigned short *pwReason;
     /*-- info elements ----------*/
 
 } WLAN_FR_DISASSOC, *PWLAN_FR_DISASSOC;
@@ -564,13 +564,13 @@ typedef struct tagWLAN_FR_DISASSOC {
 // Association Request
 typedef struct tagWLAN_FR_ASSOCREQ {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwCapInfo;
-    PWORD                   pwListenInterval;
+    unsigned short *pwCapInfo;
+    unsigned short *pwListenInterval;
     /*-- info elements ----------*/
     PWLAN_IE_SSID           pSSID;
     PWLAN_IE_SUPP_RATES     pSuppRates;
@@ -585,14 +585,14 @@ typedef struct tagWLAN_FR_ASSOCREQ {
 // Association Response
 typedef struct tagWLAN_FR_ASSOCRESP {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwCapInfo;
-    PWORD                   pwStatus;
-    PWORD                   pwAid;
+    unsigned short *pwCapInfo;
+    unsigned short *pwStatus;
+    unsigned short *pwAid;
     /*-- info elements ----------*/
     PWLAN_IE_SUPP_RATES     pSuppRates;
     PWLAN_IE_SUPP_RATES     pExtSuppRates;
@@ -602,14 +602,14 @@ typedef struct tagWLAN_FR_ASSOCRESP {
 // Reassociation Request
 typedef struct tagWLAN_FR_REASSOCREQ {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
 
     /*-- fixed fields -----------*/
-    PWORD                   pwCapInfo;
-    PWORD                   pwListenInterval;
+    unsigned short *pwCapInfo;
+    unsigned short *pwListenInterval;
     PIEEE_ADDR              pAddrCurrAP;
 
     /*-- info elements ----------*/
@@ -624,14 +624,14 @@ typedef struct tagWLAN_FR_REASSOCREQ {
 // Reassociation Response
 typedef struct tagWLAN_FR_REASSOCRESP {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwCapInfo;
-    PWORD                   pwStatus;
-    PWORD                   pwAid;
+    unsigned short *pwCapInfo;
+    unsigned short *pwStatus;
+    unsigned short *pwAid;
     /*-- info elements ----------*/
     PWLAN_IE_SUPP_RATES     pSuppRates;
     PWLAN_IE_SUPP_RATES     pExtSuppRates;
@@ -641,9 +641,9 @@ typedef struct tagWLAN_FR_REASSOCRESP {
 // Probe Request
 typedef struct tagWLAN_FR_PROBEREQ {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
     /*-- info elements ----------*/
@@ -656,14 +656,14 @@ typedef struct tagWLAN_FR_PROBEREQ {
 // Probe Response
 typedef struct tagWLAN_FR_PROBERESP {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
     PQWORD                  pqwTimestamp;
-    PWORD                   pwBeaconInterval;
-    PWORD                   pwCapInfo;
+    unsigned short *pwBeaconInterval;
+    unsigned short *pwCapInfo;
     /*-- info elements ----------*/
     PWLAN_IE_SSID           pSSID;
     PWLAN_IE_SUPP_RATES     pSuppRates;
@@ -685,14 +685,14 @@ typedef struct tagWLAN_FR_PROBERESP {
 // Authentication
 typedef struct tagWLAN_FR_AUTHEN {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwAuthAlgorithm;
-    PWORD                   pwAuthSequence;
-    PWORD                   pwStatus;
+    unsigned short *pwAuthAlgorithm;
+    unsigned short *pwAuthSequence;
+    unsigned short *pwStatus;
     /*-- info elements ----------*/
     PWLAN_IE_CHALLENGE      pChallenge;
 
@@ -701,12 +701,12 @@ typedef struct tagWLAN_FR_AUTHEN {
 // Deauthenication
 typedef struct tagWLAN_FR_DEAUTHEN {
 
-    UINT                    uType;
-    UINT                    len;
-    PBYTE                   pBuf;
+    unsigned int	uType;
+    unsigned int	len;
+    unsigned char *pBuf;
     PUWLAN_80211HDR         pHdr;
     /*-- fixed fields -----------*/
-    PWORD                   pwReason;
+    unsigned short *pwReason;
 
     /*-- info elements ----------*/
 
diff --git a/drivers/staging/vt6655/IEEE11h.c b/drivers/staging/vt6655/IEEE11h.c
index 22f12f5ef90..e07ebd578d4 100644
--- a/drivers/staging/vt6655/IEEE11h.c
+++ b/drivers/staging/vt6655/IEEE11h.c
@@ -38,6 +38,7 @@
 #include "device.h"
 #include "wmgr.h"
 #include "rxtx.h"
+#include "channel.h"
 
 /*---------------------  Static Definitions -------------------------*/
 static int          msglevel                =MSG_LEVEL_INFO;
@@ -46,40 +47,40 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 typedef struct _WLAN_FRAME_ACTION {
     WLAN_80211HDR_A3    Header;
-    BYTE                byCategory;
-    BYTE                byAction;
-    BYTE                abyVars[1];
+    unsigned char byCategory;
+    unsigned char byAction;
+    unsigned char abyVars[1];
 } WLAN_FRAME_ACTION, *PWLAN_FRAME_ACTION;
 
 typedef struct _WLAN_FRAME_MSRREQ {
     WLAN_80211HDR_A3    Header;
-    BYTE                byCategory;
-    BYTE                byAction;
-    BYTE                byDialogToken;
+    unsigned char byCategory;
+    unsigned char byAction;
+    unsigned char byDialogToken;
     WLAN_IE_MEASURE_REQ sMSRReqEIDs[1];
 } WLAN_FRAME_MSRREQ, *PWLAN_FRAME_MSRREQ;
 
 typedef struct _WLAN_FRAME_MSRREP {
     WLAN_80211HDR_A3    Header;
-    BYTE                byCategory;
-    BYTE                byAction;
-    BYTE                byDialogToken;
+    unsigned char byCategory;
+    unsigned char byAction;
+    unsigned char byDialogToken;
     WLAN_IE_MEASURE_REP sMSRRepEIDs[1];
 } WLAN_FRAME_MSRREP, *PWLAN_FRAME_MSRREP;
 
 typedef struct _WLAN_FRAME_TPCREQ {
     WLAN_80211HDR_A3    Header;
-    BYTE                byCategory;
-    BYTE                byAction;
-    BYTE                byDialogToken;
+    unsigned char byCategory;
+    unsigned char byAction;
+    unsigned char byDialogToken;
     WLAN_IE_TPC_REQ     sTPCReqEIDs;
 } WLAN_FRAME_TPCREQ, *PWLAN_FRAME_TPCREQ;
 
 typedef struct _WLAN_FRAME_TPCREP {
     WLAN_80211HDR_A3    Header;
-    BYTE                byCategory;
-    BYTE                byAction;
-    BYTE                byDialogToken;
+    unsigned char byCategory;
+    unsigned char byAction;
+    unsigned char byDialogToken;
     WLAN_IE_TPC_REP     sTPCRepEIDs;
 } WLAN_FRAME_TPCREP, *PWLAN_FRAME_TPCREP;
 
@@ -97,10 +98,11 @@ typedef struct _WLAN_FRAME_TPCREP {
 /*---------------------  Static Variables  --------------------------*/
 
 /*---------------------  Static Functions  --------------------------*/
-static BOOL s_bRxMSRReq(PSMgmtObject pMgmt, PWLAN_FRAME_MSRREQ pMSRReq, UINT uLength)
+static bool s_bRxMSRReq(PSMgmtObject pMgmt, PWLAN_FRAME_MSRREQ pMSRReq,
+		unsigned int uLength)
 {
     size_t    uNumOfEIDs = 0;
-    BOOL    bResult = TRUE;
+    bool bResult = true;
 
     if (uLength <= WLAN_A3FR_MAXLEN) {
         memcpy(pMgmt->abyCurrentMSRReq, pMSRReq, uLength);
@@ -116,7 +118,7 @@ static BOOL s_bRxMSRReq(PSMgmtObject pMgmt, PWLAN_FRAME_MSRREQ pMSRReq, UINT uLe
 }
 
 
-static BOOL s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, BYTE byRate, BYTE byRSSI)
+static bool s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, unsigned char byRate, unsigned char byRSSI)
 {
     PWLAN_FRAME_TPCREP  pFrame;
     PSTxMgmtPacket      pTxPacket = NULL;
@@ -124,9 +126,9 @@ static BOOL s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, BYTE byR
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
 
-    pFrame = (PWLAN_FRAME_TPCREP)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pFrame = (PWLAN_FRAME_TPCREP)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
 
     pFrame->Header.wFrameCtl = (   WLAN_SET_FC_FTYPE(WLAN_FTYPE_MGMT) |
                                     WLAN_SET_FC_FSTYPE(WLAN_FSTYPE_ACTION)
@@ -174,8 +176,8 @@ static BOOL s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, BYTE byR
     pTxPacket->cbMPDULen = sizeof(WLAN_FRAME_TPCREP);
     pTxPacket->cbPayloadLen = sizeof(WLAN_FRAME_TPCREP) - WLAN_HDR_ADDR3_LEN;
     if (csMgmt_xmit(pMgmt->pAdapter, pTxPacket) != CMD_STATUS_PENDING)
-        return (FALSE);
-    return (TRUE);
+        return (false);
+    return (true);
 //    return (CARDbSendPacket(pMgmt->pAdapter, pFrame, PKT_TYPE_802_11_MNG, sizeof(WLAN_FRAME_TPCREP)));
 
 }
@@ -201,7 +203,7 @@ static BOOL s_bRxTPCReq(PSMgmtObject pMgmt, PWLAN_FRAME_TPCREQ pTPCReq, BYTE byR
  * Return Value: None.
  *
 -*/
-BOOL
+bool
 IEEE11hbMgrRxAction (
     void *pMgmtHandle,
     void *pRxPacket
@@ -209,14 +211,14 @@ IEEE11hbMgrRxAction (
 {
     PSMgmtObject            pMgmt = (PSMgmtObject) pMgmtHandle;
     PWLAN_FRAME_ACTION      pAction = NULL;
-    UINT                    uLength = 0;
+    unsigned int uLength = 0;
     PWLAN_IE_CH_SW          pChannelSwitch = NULL;
 
 
     // decode the frame
     uLength = ((PSRxMgmtPacket)pRxPacket)->cbMPDULen;
     if (uLength > WLAN_A3FR_MAXLEN) {
-        return (FALSE);
+        return (false);
     }
 
 
@@ -233,7 +235,7 @@ IEEE11hbMgrRxAction (
                 return (s_bRxTPCReq(pMgmt,
                                     (PWLAN_FRAME_TPCREQ) pAction,
                                     ((PSRxMgmtPacket)pRxPacket)->byRxRate,
-                                    (BYTE) ((PSRxMgmtPacket)pRxPacket)->uRSSI));
+                                    (unsigned char) ((PSRxMgmtPacket)pRxPacket)->uRSSI));
                 break;
             case ACTION_TPCREP:
                 break;
@@ -244,7 +246,7 @@ IEEE11hbMgrRxAction (
                     // valid element id
                     CARDbChannelSwitch( pMgmt->pAdapter,
                                         pChannelSwitch->byMode,
-                                        CARDbyGetChannelMapping(pMgmt->pAdapter, pChannelSwitch->byChannel, pMgmt->eCurrentPHYMode),
+                                        get_channel_mapping(pMgmt->pAdapter, pChannelSwitch->byChannel, pMgmt->eCurrentPHYMode),
                                         pChannelSwitch->byCount
                                         );
                 }
@@ -258,13 +260,13 @@ IEEE11hbMgrRxAction (
         pAction->byCategory |= 0x80;
 
        //return (CARDbSendPacket(pMgmt->pAdapter, pAction, PKT_TYPE_802_11_MNG, uLength));
-        return (TRUE);
+        return (true);
     }
-    return (TRUE);
+    return (true);
 }
 
 
-BOOL IEEE11hbMSRRepTx (
+bool IEEE11hbMSRRepTx (
     void *pMgmtHandle
     )
 {
@@ -275,7 +277,7 @@ BOOL IEEE11hbMSRRepTx (
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->abyCurrentMSRRep;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
 
 
     pMSRRep->Header.wFrameCtl = (   WLAN_SET_FC_FTYPE(WLAN_FTYPE_MGMT) |
@@ -295,8 +297,8 @@ BOOL IEEE11hbMSRRepTx (
     pTxPacket->cbMPDULen = uLength;
     pTxPacket->cbPayloadLen = uLength - WLAN_HDR_ADDR3_LEN;
     if (csMgmt_xmit(pMgmt->pAdapter, pTxPacket) != CMD_STATUS_PENDING)
-        return (FALSE);
-    return (TRUE);
+        return (false);
+    return (true);
 //    return (CARDbSendPacket(pMgmt->pAdapter, pMSRRep, PKT_TYPE_802_11_MNG, uLength));
 
 }
diff --git a/drivers/staging/vt6655/IEEE11h.h b/drivers/staging/vt6655/IEEE11h.h
index ae32498a511..542340b96e3 100644
--- a/drivers/staging/vt6655/IEEE11h.h
+++ b/drivers/staging/vt6655/IEEE11h.h
@@ -45,7 +45,7 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL IEEE11hbMSRRepTx (
+bool IEEE11hbMSRRepTx (
     void *pMgmtHandle
     );
 
diff --git a/drivers/staging/vt6655/Makefile b/drivers/staging/vt6655/Makefile
index 931deb109ee..824c9718787 100644
--- a/drivers/staging/vt6655/Makefile
+++ b/drivers/staging/vt6655/Makefile
@@ -4,6 +4,7 @@ EXTRA_CFLAGS += -DHOSTAP
 
 vt6655_stage-y +=	device_main.o \
 	card.o \
+	channel.o \
 	mac.o \
 	baseband.o \
 	wctl.o \
diff --git a/drivers/staging/vt6655/TODO b/drivers/staging/vt6655/TODO
index cb04aaafc46..63607ef9c97 100644
--- a/drivers/staging/vt6655/TODO
+++ b/drivers/staging/vt6655/TODO
@@ -3,7 +3,6 @@ TODO:
 - prepare for merge with vt6656 driver:
   - rename DEVICE_PRT() to DBG_PRT() -- done
   - share 80211*.h includes
-  - move code for channel mapping from card.c to channel.c
   - split rf.c
   - remove dead code
   - abstract VT3253 chipset specific code
@@ -11,6 +10,8 @@ TODO:
 - kill ttype.h
 - switch to use LIB80211
 - switch to use MAC80211
+- verify unsigned long usage for x86-64 arch
+- reduce .data footprint
 - use kernel coding style
 - checkpatch.pl fixes
 - sparse fixes
diff --git a/drivers/staging/vt6655/aes_ccmp.c b/drivers/staging/vt6655/aes_ccmp.c
index fef1b91c292..e30168f2da2 100644
--- a/drivers/staging/vt6655/aes_ccmp.c
+++ b/drivers/staging/vt6655/aes_ccmp.c
@@ -46,7 +46,7 @@
  * SBOX Table
  */
 
-BYTE sbox_table[256] =
+unsigned char sbox_table[256] =
 {
 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
@@ -66,7 +66,7 @@ BYTE sbox_table[256] =
 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
 };
 
-BYTE dot2_table[256] = {
+unsigned char dot2_table[256] = {
 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
 0x20, 0x22, 0x24, 0x26, 0x28, 0x2a, 0x2c, 0x2e, 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e,
 0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e, 0x50, 0x52, 0x54, 0x56, 0x58, 0x5a, 0x5c, 0x5e,
@@ -85,7 +85,7 @@ BYTE dot2_table[256] = {
 0xfb, 0xf9, 0xff, 0xfd, 0xf3, 0xf1, 0xf7, 0xf5, 0xeb, 0xe9, 0xef, 0xed, 0xe3, 0xe1, 0xe7, 0xe5
 };
 
-BYTE dot3_table[256] = {
+unsigned char dot3_table[256] = {
 0x00, 0x03, 0x06, 0x05, 0x0c, 0x0f, 0x0a, 0x09, 0x18, 0x1b, 0x1e, 0x1d, 0x14, 0x17, 0x12, 0x11,
 0x30, 0x33, 0x36, 0x35, 0x3c, 0x3f, 0x3a, 0x39, 0x28, 0x2b, 0x2e, 0x2d, 0x24, 0x27, 0x22, 0x21,
 0x60, 0x63, 0x66, 0x65, 0x6c, 0x6f, 0x6a, 0x69, 0x78, 0x7b, 0x7e, 0x7d, 0x74, 0x77, 0x72, 0x71,
@@ -110,11 +110,11 @@ BYTE dot3_table[256] = {
 
 /*---------------------  Export Functions  --------------------------*/
 
-void xor_128(BYTE *a, BYTE *b, BYTE *out)
+void xor_128(unsigned char *a, unsigned char *b, unsigned char *out)
 {
-PDWORD dwPtrA = (PDWORD) a;
-PDWORD dwPtrB = (PDWORD) b;
-PDWORD dwPtrOut =(PDWORD) out;
+unsigned long *dwPtrA = (unsigned long *) a;
+unsigned long *dwPtrB = (unsigned long *) b;
+unsigned long *dwPtrOut =(unsigned long *) out;
 
     (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
     (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
@@ -123,19 +123,19 @@ PDWORD dwPtrOut =(PDWORD) out;
 }
 
 
-void xor_32(BYTE *a, BYTE *b, BYTE *out)
+void xor_32(unsigned char *a, unsigned char *b, unsigned char *out)
 {
-PDWORD dwPtrA = (PDWORD) a;
-PDWORD dwPtrB = (PDWORD) b;
-PDWORD dwPtrOut =(PDWORD) out;
+unsigned long *dwPtrA = (unsigned long *) a;
+unsigned long *dwPtrB = (unsigned long *) b;
+unsigned long *dwPtrOut =(unsigned long *) out;
 
     (*dwPtrOut++) = (*dwPtrA++) ^ (*dwPtrB++);
 }
 
-void AddRoundKey(BYTE *key, int round)
+void AddRoundKey(unsigned char *key, int round)
 {
-BYTE sbox_key[4];
-BYTE rcon_table[10] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36};
+unsigned char sbox_key[4];
+unsigned char rcon_table[10] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36};
 
     sbox_key[0] = sbox_table[key[13]];
     sbox_key[1] = sbox_table[key[14]];
@@ -150,7 +150,7 @@ BYTE rcon_table[10] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x
     xor_32(&key[12], &key[8], &key[12]);
 }
 
-void SubBytes(BYTE *in, BYTE *out)
+void SubBytes(unsigned char *in, unsigned char *out)
 {
 int i;
 
@@ -160,7 +160,7 @@ int i;
     }
 }
 
-void ShiftRows(BYTE *in, BYTE *out)
+void ShiftRows(unsigned char *in, unsigned char *out)
 {
     out[0]  = in[0];
     out[1]  = in[5];
@@ -180,7 +180,7 @@ void ShiftRows(BYTE *in, BYTE *out)
     out[15] = in[11];
 }
 
-void MixColumns(BYTE *in, BYTE *out)
+void MixColumns(unsigned char *in, unsigned char *out)
 {
 
     out[0] = dot2_table[in[0]] ^ dot3_table[in[1]] ^ in[2] ^ in[3];
@@ -190,13 +190,13 @@ void MixColumns(BYTE *in, BYTE *out)
 }
 
 
-void AESv128(BYTE *key, BYTE *data, BYTE *ciphertext)
+void AESv128(unsigned char *key, unsigned char *data, unsigned char *ciphertext)
 {
 int  i;
 int  round;
-BYTE TmpdataA[16];
-BYTE TmpdataB[16];
-BYTE abyRoundKey[16];
+unsigned char TmpdataA[16];
+unsigned char TmpdataB[16];
+unsigned char abyRoundKey[16];
 
     for(i=0; i<16; i++)
         abyRoundKey[i] = key[i];
@@ -243,33 +243,33 @@ BYTE abyRoundKey[16];
  * Return Value: MIC compare result
  *
  */
-BOOL AESbGenCCMP(PBYTE pbyRxKey, PBYTE pbyFrame, WORD wFrameSize)
+bool AESbGenCCMP(unsigned char *pbyRxKey, unsigned char *pbyFrame, unsigned short wFrameSize)
 {
-BYTE            abyNonce[13];
-BYTE            MIC_IV[16];
-BYTE            MIC_HDR1[16];
-BYTE            MIC_HDR2[16];
-BYTE            abyMIC[16];
-BYTE            abyCTRPLD[16];
-BYTE            abyTmp[16];
-BYTE            abyPlainText[16];
-BYTE            abyLastCipher[16];
+unsigned char abyNonce[13];
+unsigned char MIC_IV[16];
+unsigned char MIC_HDR1[16];
+unsigned char MIC_HDR2[16];
+unsigned char abyMIC[16];
+unsigned char abyCTRPLD[16];
+unsigned char abyTmp[16];
+unsigned char abyPlainText[16];
+unsigned char abyLastCipher[16];
 
 PS802_11Header  pMACHeader = (PS802_11Header) pbyFrame;
-PBYTE           pbyIV;
-PBYTE           pbyPayload;
-WORD            wHLen = 22;
-WORD            wPayloadSize = wFrameSize - 8 - 8 - 4 - WLAN_HDR_ADDR3_LEN;//8 is IV, 8 is MIC, 4 is CRC
-BOOL            bA4 = FALSE;
-BYTE            byTmp;
-WORD            wCnt;
+unsigned char *pbyIV;
+unsigned char *pbyPayload;
+unsigned short wHLen = 22;
+unsigned short wPayloadSize = wFrameSize - 8 - 8 - 4 - WLAN_HDR_ADDR3_LEN;//8 is IV, 8 is MIC, 4 is CRC
+bool bA4 = false;
+unsigned char byTmp;
+unsigned short wCnt;
 int             ii,jj,kk;
 
 
     pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
-    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
-         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
-         bA4 = TRUE;
+    if ( WLAN_GET_FC_TODS(*(unsigned short *)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(unsigned short *)pbyFrame) ) {
+         bA4 = true;
          pbyIV += 6;             // 6 is 802.11 address4
          wHLen += 6;
          wPayloadSize -= 6;
@@ -288,15 +288,15 @@ int             ii,jj,kk;
     //MIC_IV
     MIC_IV[0] = 0x59;
     memcpy(&(MIC_IV[1]), &(abyNonce[0]), 13);
-    MIC_IV[14] = (BYTE)(wPayloadSize >> 8);
-    MIC_IV[15] = (BYTE)(wPayloadSize & 0xff);
+    MIC_IV[14] = (unsigned char)(wPayloadSize >> 8);
+    MIC_IV[15] = (unsigned char)(wPayloadSize & 0xff);
 
     //MIC_HDR1
-    MIC_HDR1[0] = (BYTE)(wHLen >> 8);
-    MIC_HDR1[1] = (BYTE)(wHLen & 0xff);
-    byTmp = (BYTE)(pMACHeader->wFrameCtl & 0xff);
+    MIC_HDR1[0] = (unsigned char)(wHLen >> 8);
+    MIC_HDR1[1] = (unsigned char)(wHLen & 0xff);
+    byTmp = (unsigned char)(pMACHeader->wFrameCtl & 0xff);
     MIC_HDR1[2] = byTmp & 0x8f;
-    byTmp = (BYTE)(pMACHeader->wFrameCtl >> 8);
+    byTmp = (unsigned char)(pMACHeader->wFrameCtl >> 8);
     byTmp &= 0x87;
     MIC_HDR1[3] = byTmp | 0x40;
     memcpy(&(MIC_HDR1[4]), pMACHeader->abyAddr1, ETH_ALEN);
@@ -304,7 +304,7 @@ int             ii,jj,kk;
 
     //MIC_HDR2
     memcpy(&(MIC_HDR2[0]), pMACHeader->abyAddr3, ETH_ALEN);
-    byTmp = (BYTE)(pMACHeader->wSeqCtl & 0xff);
+    byTmp = (unsigned char)(pMACHeader->wSeqCtl & 0xff);
     MIC_HDR2[6] = byTmp & 0x0f;
     MIC_HDR2[7] = 0;
     if ( bA4 ) {
@@ -337,8 +337,8 @@ int             ii,jj,kk;
 
     for(jj=wPayloadSize; jj>16; jj=jj-16) {
 
-        abyCTRPLD[14] = (BYTE) (wCnt >> 8);
-        abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+        abyCTRPLD[14] = (unsigned char) (wCnt >> 8);
+        abyCTRPLD[15] = (unsigned char) (wCnt & 0xff);
 
         AESv128(pbyRxKey,abyCTRPLD,abyTmp);
 
@@ -361,8 +361,8 @@ int             ii,jj,kk;
         abyLastCipher[ii] = 0x00;
     }
 
-    abyCTRPLD[14] = (BYTE) (wCnt >> 8);
-    abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+    abyCTRPLD[14] = (unsigned char) (wCnt >> 8);
+    abyCTRPLD[15] = (unsigned char) (wCnt & 0xff);
 
     AESv128(pbyRxKey,abyCTRPLD,abyTmp);
     for ( kk=0; kk<16; kk++ ) {
@@ -384,8 +384,8 @@ int             ii,jj,kk;
     //--------------------------------------------
 
     wCnt = 0;
-    abyCTRPLD[14] = (BYTE) (wCnt >> 8);
-    abyCTRPLD[15] = (BYTE) (wCnt & 0xff);
+    abyCTRPLD[14] = (unsigned char) (wCnt >> 8);
+    abyCTRPLD[15] = (unsigned char) (wCnt & 0xff);
     AESv128(pbyRxKey,abyCTRPLD,abyTmp);
     for ( kk=0; kk<8; kk++ ) {
         abyTmp[kk] = abyTmp[kk] ^ pbyPayload[kk];
@@ -394,9 +394,9 @@ int             ii,jj,kk;
     //--------------------------------------------
 
     if ( !memcmp(abyMIC,abyTmp,8) ) {
-        return TRUE;
+        return true;
     } else {
-        return FALSE;
+        return false;
     }
 
 }
diff --git a/drivers/staging/vt6655/aes_ccmp.h b/drivers/staging/vt6655/aes_ccmp.h
index f2ba1d5aa1e..c8b28b0e9bd 100644
--- a/drivers/staging/vt6655/aes_ccmp.h
+++ b/drivers/staging/vt6655/aes_ccmp.h
@@ -41,6 +41,6 @@
 /*---------------------  Export Variables  --------------------------*/
 
 /*---------------------  Export Functions  --------------------------*/
-BOOL AESbGenCCMP(PBYTE pbyRxKey, PBYTE pbyFrame, WORD wFrameSize);
+bool AESbGenCCMP(unsigned char *pbyRxKey, unsigned char *pbyFrame, unsigned short wFrameSize);
 
 #endif //__AES_H__
diff --git a/drivers/staging/vt6655/baseband.c b/drivers/staging/vt6655/baseband.c
index 5414c6c6c05..1e1c6e34f78 100644
--- a/drivers/staging/vt6655/baseband.c
+++ b/drivers/staging/vt6655/baseband.c
@@ -79,7 +79,7 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 
 #define CB_VT3253_INIT_FOR_RFMD 446
-BYTE byVT3253InitTab_RFMD[CB_VT3253_INIT_FOR_RFMD][2] = {
+unsigned char byVT3253InitTab_RFMD[CB_VT3253_INIT_FOR_RFMD][2] = {
     {0x00, 0x30},
     {0x01, 0x00},
     {0x02, 0x00},
@@ -529,7 +529,7 @@ BYTE byVT3253InitTab_RFMD[CB_VT3253_INIT_FOR_RFMD][2] = {
 };
 
 #define CB_VT3253B0_INIT_FOR_RFMD 256
-BYTE byVT3253B0_RFMD[CB_VT3253B0_INIT_FOR_RFMD][2] = {
+unsigned char byVT3253B0_RFMD[CB_VT3253B0_INIT_FOR_RFMD][2] = {
     {0x00, 0x31},
     {0x01, 0x00},
     {0x02, 0x00},
@@ -790,7 +790,7 @@ BYTE byVT3253B0_RFMD[CB_VT3253B0_INIT_FOR_RFMD][2] = {
 
 #define CB_VT3253B0_AGC_FOR_RFMD2959 195
 // For RFMD2959
-BYTE byVT3253B0_AGC4_RFMD2959[CB_VT3253B0_AGC_FOR_RFMD2959][2] = {
+unsigned char byVT3253B0_AGC4_RFMD2959[CB_VT3253B0_AGC_FOR_RFMD2959][2] = {
     {0xF0, 0x00},
     {0xF1, 0x3E},
     {0xF0, 0x80},
@@ -990,7 +990,7 @@ BYTE byVT3253B0_AGC4_RFMD2959[CB_VT3253B0_AGC_FOR_RFMD2959][2] = {
 
 #define CB_VT3253B0_INIT_FOR_AIROHA2230 256
 // For AIROHA
-BYTE byVT3253B0_AIROHA2230[CB_VT3253B0_INIT_FOR_AIROHA2230][2] = {
+unsigned char byVT3253B0_AIROHA2230[CB_VT3253B0_INIT_FOR_AIROHA2230][2] = {
     {0x00, 0x31},
     {0x01, 0x00},
     {0x02, 0x00},
@@ -1254,7 +1254,7 @@ BYTE byVT3253B0_AIROHA2230[CB_VT3253B0_INIT_FOR_AIROHA2230][2] = {
 
 #define CB_VT3253B0_INIT_FOR_UW2451 256
 //For UW2451
-BYTE byVT3253B0_UW2451[CB_VT3253B0_INIT_FOR_UW2451][2] = {
+unsigned char byVT3253B0_UW2451[CB_VT3253B0_INIT_FOR_UW2451][2] = {
     {0x00, 0x31},
     {0x01, 0x00},
     {0x02, 0x00},
@@ -1516,7 +1516,7 @@ BYTE byVT3253B0_UW2451[CB_VT3253B0_INIT_FOR_UW2451][2] = {
 
 #define CB_VT3253B0_AGC 193
 // For AIROHA
-BYTE byVT3253B0_AGC[CB_VT3253B0_AGC][2] = {
+unsigned char byVT3253B0_AGC[CB_VT3253B0_AGC][2] = {
     {0xF0, 0x00},
     {0xF1, 0x00},
     {0xF0, 0x80},
@@ -1712,14 +1712,14 @@ BYTE byVT3253B0_AGC[CB_VT3253B0_AGC][2] = {
     {0xF0, 0x00},
 };
 
-const WORD awcFrameTime[MAX_RATE] =
+const unsigned short awcFrameTime[MAX_RATE] =
 {10, 20, 55, 110, 24, 36, 48, 72, 96, 144, 192, 216};
 
 
 /*---------------------  Static Functions  --------------------------*/
 
 static
-ULONG
+unsigned long
 s_ulGetRatio(PSDevice pDevice);
 
 static
@@ -1740,13 +1740,13 @@ s_vChangeAntenna (
 #endif
     if ( pDevice->dwRxAntennaSel == 0) {
         pDevice->dwRxAntennaSel=1;
-        if (pDevice->bTxRxAntInv == TRUE)
+        if (pDevice->bTxRxAntInv == true)
             BBvSetRxAntennaMode(pDevice->PortOffset, ANT_A);
         else
             BBvSetRxAntennaMode(pDevice->PortOffset, ANT_B);
     } else {
         pDevice->dwRxAntennaSel=0;
-        if (pDevice->bTxRxAntInv == TRUE)
+        if (pDevice->bTxRxAntInv == true)
             BBvSetRxAntennaMode(pDevice->PortOffset, ANT_B);
         else
             BBvSetRxAntennaMode(pDevice->PortOffset, ANT_A);
@@ -1776,19 +1776,19 @@ s_vChangeAntenna (
  * Return Value: FrameTime
  *
  */
-UINT
+unsigned int
 BBuGetFrameTime (
-    BYTE byPreambleType,
-    BYTE byPktType,
-    UINT cbFrameLength,
-    WORD wRate
+    unsigned char byPreambleType,
+    unsigned char byPktType,
+    unsigned int cbFrameLength,
+    unsigned short wRate
     )
 {
-    UINT uFrameTime;
-    UINT uPreamble;
-    UINT uTmp;
-    UINT uRateIdx = (UINT)wRate;
-    UINT uRate = 0;
+    unsigned int uFrameTime;
+    unsigned int uPreamble;
+    unsigned int uTmp;
+    unsigned int uRateIdx = (unsigned int) wRate;
+    unsigned int uRate = 0;
 
 
     if (uRateIdx > RATE_54M) {
@@ -1796,7 +1796,7 @@ BBuGetFrameTime (
         return 0;
     }
 
-    uRate = (UINT)awcFrameTime[uRateIdx];
+    uRate = (unsigned int) awcFrameTime[uRateIdx];
 
     if (uRateIdx <= 3) {          //CCK mode
 
@@ -1846,23 +1846,23 @@ BBuGetFrameTime (
 void
 BBvCaculateParameter (
     PSDevice pDevice,
-    UINT cbFrameLength,
-    WORD wRate,
-    BYTE byPacketType,
-    PWORD pwPhyLen,
-    PBYTE pbyPhySrv,
-    PBYTE pbyPhySgn
+    unsigned int cbFrameLength,
+    unsigned short wRate,
+    unsigned char byPacketType,
+    unsigned short *pwPhyLen,
+    unsigned char *pbyPhySrv,
+    unsigned char *pbyPhySgn
     )
 {
-    UINT cbBitCount;
-    UINT cbUsCount = 0;
-    UINT cbTmp;
-    BOOL bExtBit;
-    BYTE byPreambleType = pDevice->byPreambleType;
-    BOOL bCCK = pDevice->bCCK;
+    unsigned int cbBitCount;
+    unsigned int cbUsCount = 0;
+    unsigned int cbTmp;
+    bool bExtBit;
+    unsigned char byPreambleType = pDevice->byPreambleType;
+    bool bCCK = pDevice->bCCK;
 
     cbBitCount = cbFrameLength * 8;
-    bExtBit = FALSE;
+    bExtBit = false;
 
     switch (wRate) {
     case RATE_1M :
@@ -1879,7 +1879,7 @@ BBvCaculateParameter (
         break;
 
     case RATE_5M :
-        if (bCCK == FALSE)
+        if (bCCK == false)
             cbBitCount ++;
         cbUsCount = (cbBitCount * 10) / 55;
         cbTmp = (cbUsCount * 55) / 10;
@@ -1893,14 +1893,14 @@ BBvCaculateParameter (
 
     case RATE_11M :
 
-        if (bCCK == FALSE)
+        if (bCCK == false)
             cbBitCount ++;
         cbUsCount = cbBitCount / 11;
         cbTmp = cbUsCount * 11;
         if (cbTmp != cbBitCount) {
             cbUsCount ++;
             if ((cbBitCount - cbTmp) <= 3)
-                bExtBit = TRUE;
+                bExtBit = true;
         }
         if (byPreambleType == 1)
             *pbyPhySgn = 0x0b;
@@ -1994,11 +1994,11 @@ BBvCaculateParameter (
         *pbyPhySrv = 0x00;
         if (bExtBit)
             *pbyPhySrv = *pbyPhySrv | 0x80;
-        *pwPhyLen = (WORD)cbUsCount;
+        *pwPhyLen = (unsigned short)cbUsCount;
     }
     else {
         *pbyPhySrv = 0x00;
-        *pwPhyLen = (WORD)cbFrameLength;
+        *pwPhyLen = (unsigned short)cbFrameLength;
     }
 }
 
@@ -2012,13 +2012,13 @@ BBvCaculateParameter (
  *  Out:
  *      pbyData     - data read
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL BBbReadEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData)
+bool BBbReadEmbeded (unsigned long dwIoBase, unsigned char byBBAddr, unsigned char *pbyData)
 {
-    WORD    ww;
-    BYTE    byValue;
+    unsigned short ww;
+    unsigned char byValue;
 
     // BB reg offset
     VNSvOutPortB(dwIoBase + MAC_REG_BBREGADR, byBBAddr);
@@ -2038,9 +2038,9 @@ BOOL BBbReadEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x30);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x30)\n");
-        return FALSE;
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
 
@@ -2055,13 +2055,13 @@ BOOL BBbReadEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL BBbWriteEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData)
+bool BBbWriteEmbeded (unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byData)
 {
-    WORD    ww;
-    BYTE    byValue;
+    unsigned short ww;
+    unsigned char byValue;
 
     // BB reg offset
     VNSvOutPortB(dwIoBase + MAC_REG_BBREGADR, byBBAddr);
@@ -2080,9 +2080,9 @@ BOOL BBbWriteEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x31);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x31)\n");
-        return FALSE;
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
 
@@ -2097,12 +2097,12 @@ BOOL BBbWriteEmbeded (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all TestBits are set; FALSE otherwise.
+ * Return Value: true if all TestBits are set; false otherwise.
  *
  */
-BOOL BBbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
+bool BBbIsRegBitsOn (unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byTestBits)
 {
-    BYTE byOrgData;
+    unsigned char byOrgData;
 
     BBbReadEmbeded(dwIoBase, byBBAddr, &byOrgData);
     return (byOrgData & byTestBits) == byTestBits;
@@ -2120,12 +2120,12 @@ BOOL BBbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all TestBits are clear; FALSE otherwise.
+ * Return Value: true if all TestBits are clear; false otherwise.
  *
  */
-BOOL BBbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
+bool BBbIsRegBitsOff (unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byTestBits)
 {
-    BYTE byOrgData;
+    unsigned char byOrgData;
 
     BBbReadEmbeded(dwIoBase, byBBAddr, &byOrgData);
     return (byOrgData & byTestBits) == 0;
@@ -2142,17 +2142,17 @@ BOOL BBbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
-BOOL BBbVT3253Init (PSDevice pDevice)
+bool BBbVT3253Init (PSDevice pDevice)
 {
-    BOOL       bResult = TRUE;
+    bool bResult = true;
     int        ii;
-    DWORD_PTR  dwIoBase = pDevice->PortOffset;
-    BYTE       byRFType = pDevice->byRFType;
-    BYTE       byLocalID = pDevice->byLocalID;
+    unsigned long dwIoBase = pDevice->PortOffset;
+    unsigned char byRFType = pDevice->byRFType;
+    unsigned char byLocalID = pDevice->byLocalID;
 
     if (byRFType == RF_RFMD2959) {
         if (byLocalID <= REV_ID_VT3253_A1) {
@@ -2294,7 +2294,7 @@ BOOL BBbVT3253Init (PSDevice pDevice)
     //}} RobertYu
     } else {
     	// No VGA Table now
-    	pDevice->bUpdateBBVGA = FALSE;
+    	pDevice->bUpdateBBVGA = false;
         pDevice->abyBBVGA[0] = 0x1C;
     }
 
@@ -2321,12 +2321,12 @@ BOOL BBbVT3253Init (PSDevice pDevice)
  * Return Value: none
  *
  */
-void BBvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyBBRegs)
+void BBvReadAllRegs (unsigned long dwIoBase, unsigned char *pbyBBRegs)
 {
     int  ii;
-    BYTE byBase = 1;
+    unsigned char byBase = 1;
     for (ii = 0; ii < BB_MAX_CONTEXT_SIZE; ii++) {
-        BBbReadEmbeded(dwIoBase, (BYTE)(ii*byBase), pbyBBRegs);
+        BBbReadEmbeded(dwIoBase, (unsigned char)(ii*byBase), pbyBBRegs);
         pbyBBRegs += byBase;
     }
 }
@@ -2348,8 +2348,8 @@ void BBvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyBBRegs)
 
 void BBvLoopbackOn (PSDevice pDevice)
 {
-    BYTE      byData;
-    DWORD_PTR dwIoBase = pDevice->PortOffset;
+    unsigned char byData;
+    unsigned long dwIoBase = pDevice->PortOffset;
 
     //CR C9 = 0x00
     BBbReadEmbeded(dwIoBase, 0xC9, &pDevice->byBBCRc9);//CR201
@@ -2363,7 +2363,7 @@ void BBvLoopbackOn (PSDevice pDevice)
     if (pDevice->uConnectionRate <= RATE_11M) { //CCK
         // Enable internal digital loopback: CR33 |= 0000 0001
         BBbReadEmbeded(dwIoBase, 0x21, &byData);//CR33
-        BBbWriteEmbeded(dwIoBase, 0x21, (BYTE)(byData | 0x01));//CR33
+        BBbWriteEmbeded(dwIoBase, 0x21, (unsigned char)(byData | 0x01));//CR33
         // CR154 = 0x00
         BBbWriteEmbeded(dwIoBase, 0x9A, 0);   //CR154
 
@@ -2372,7 +2372,7 @@ void BBvLoopbackOn (PSDevice pDevice)
     else { //OFDM
         // Enable internal digital loopback:CR154 |= 0000 0001
         BBbReadEmbeded(dwIoBase, 0x9A, &byData);//CR154
-        BBbWriteEmbeded(dwIoBase, 0x9A, (BYTE)(byData | 0x01));//CR154
+        BBbWriteEmbeded(dwIoBase, 0x9A, (unsigned char)(byData | 0x01));//CR154
         // CR33 = 0x00
         BBbWriteEmbeded(dwIoBase, 0x21, 0);   //CR33
 
@@ -2384,7 +2384,7 @@ void BBvLoopbackOn (PSDevice pDevice)
 
     // Disable TX_IQUN
     BBbReadEmbeded(pDevice->PortOffset, 0x09, &pDevice->byBBCR09);
-    BBbWriteEmbeded(pDevice->PortOffset, 0x09, (BYTE)(pDevice->byBBCR09 & 0xDE));
+    BBbWriteEmbeded(pDevice->PortOffset, 0x09, (unsigned char)(pDevice->byBBCR09 & 0xDE));
 }
 
 /*
@@ -2402,8 +2402,8 @@ void BBvLoopbackOn (PSDevice pDevice)
  */
 void BBvLoopbackOff (PSDevice pDevice)
 {
-    BYTE      byData;
-    DWORD_PTR dwIoBase = pDevice->PortOffset;
+    unsigned char byData;
+    unsigned long dwIoBase = pDevice->PortOffset;
 
     BBbWriteEmbeded(dwIoBase, 0xC9, pDevice->byBBCRc9);//CR201
     BBbWriteEmbeded(dwIoBase, 0x88, pDevice->byBBCR88);//CR136
@@ -2413,14 +2413,14 @@ void BBvLoopbackOff (PSDevice pDevice)
     if (pDevice->uConnectionRate <= RATE_11M) { // CCK
         // Set the CR33 Bit2 to disable internal Loopback.
         BBbReadEmbeded(dwIoBase, 0x21, &byData);//CR33
-        BBbWriteEmbeded(dwIoBase, 0x21, (BYTE)(byData & 0xFE));//CR33
+        BBbWriteEmbeded(dwIoBase, 0x21, (unsigned char)(byData & 0xFE));//CR33
     }
     else { // OFDM
         BBbReadEmbeded(dwIoBase, 0x9A, &byData);//CR154
-        BBbWriteEmbeded(dwIoBase, 0x9A, (BYTE)(byData & 0xFE));//CR154
+        BBbWriteEmbeded(dwIoBase, 0x9A, (unsigned char)(byData & 0xFE));//CR154
     }
     BBbReadEmbeded(dwIoBase, 0x0E, &byData);//CR14
-    BBbWriteEmbeded(dwIoBase, 0x0E, (BYTE)(byData | 0x80));//CR14
+    BBbWriteEmbeded(dwIoBase, 0x0E, (unsigned char)(byData | 0x80));//CR14
 
 }
 
@@ -2441,8 +2441,8 @@ void BBvLoopbackOff (PSDevice pDevice)
 void
 BBvSetShortSlotTime (PSDevice pDevice)
 {
-    BYTE byBBRxConf=0;
-    BYTE byBBVGA=0;
+    unsigned char byBBRxConf=0;
+    unsigned char byBBVGA=0;
 
     BBbReadEmbeded(pDevice->PortOffset, 0x0A, &byBBRxConf);//CR10
 
@@ -2462,9 +2462,9 @@ BBvSetShortSlotTime (PSDevice pDevice)
 
 }
 
-void BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData)
+void BBvSetVGAGainOffset(PSDevice pDevice, unsigned char byData)
 {
-    BYTE byBBRxConf=0;
+    unsigned char byBBRxConf=0;
 
     BBbWriteEmbeded(pDevice->PortOffset, 0xE7, byData);
 
@@ -2495,7 +2495,7 @@ void BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData)
  *
  */
 void
-BBvSoftwareReset (DWORD_PTR dwIoBase)
+BBvSoftwareReset (unsigned long dwIoBase)
 {
     BBbWriteEmbeded(dwIoBase, 0x50, 0x40);
     BBbWriteEmbeded(dwIoBase, 0x50, 0);
@@ -2516,9 +2516,9 @@ BBvSoftwareReset (DWORD_PTR dwIoBase)
  *
  */
 void
-BBvPowerSaveModeON (DWORD_PTR dwIoBase)
+BBvPowerSaveModeON (unsigned long dwIoBase)
 {
-    BYTE byOrgData;
+    unsigned char byOrgData;
 
     BBbReadEmbeded(dwIoBase, 0x0D, &byOrgData);
     byOrgData |= BIT0;
@@ -2538,9 +2538,9 @@ BBvPowerSaveModeON (DWORD_PTR dwIoBase)
  *
  */
 void
-BBvPowerSaveModeOFF (DWORD_PTR dwIoBase)
+BBvPowerSaveModeOFF (unsigned long dwIoBase)
 {
-    BYTE byOrgData;
+    unsigned char byOrgData;
 
     BBbReadEmbeded(dwIoBase, 0x0D, &byOrgData);
     byOrgData &= ~(BIT0);
@@ -2562,9 +2562,9 @@ BBvPowerSaveModeOFF (DWORD_PTR dwIoBase)
  */
 
 void
-BBvSetTxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
+BBvSetTxAntennaMode (unsigned long dwIoBase, unsigned char byAntennaMode)
 {
-    BYTE byBBTxConf;
+    unsigned char byBBTxConf;
 
 #ifdef	PLICE_DEBUG
 	//printk("Enter BBvSetTxAntennaMode\n");
@@ -2604,9 +2604,9 @@ BBvSetTxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
  */
 
 void
-BBvSetRxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
+BBvSetRxAntennaMode (unsigned long dwIoBase, unsigned char byAntennaMode)
 {
-    BYTE byBBRxConf;
+    unsigned char byBBRxConf;
 
     BBbReadEmbeded(dwIoBase, 0x0A, &byBBRxConf);//CR10
     if (byAntennaMode == ANT_DIVERSITY) {
@@ -2635,14 +2635,14 @@ BBvSetRxAntennaMode (DWORD_PTR dwIoBase, BYTE byAntennaMode)
  *
  */
 void
-BBvSetDeepSleep (DWORD_PTR dwIoBase, BYTE byLocalID)
+BBvSetDeepSleep (unsigned long dwIoBase, unsigned char byLocalID)
 {
     BBbWriteEmbeded(dwIoBase, 0x0C, 0x17);//CR12
     BBbWriteEmbeded(dwIoBase, 0x0D, 0xB9);//CR13
 }
 
 void
-BBvExitDeepSleep (DWORD_PTR dwIoBase, BYTE byLocalID)
+BBvExitDeepSleep (unsigned long dwIoBase, unsigned char byLocalID)
 {
     BBbWriteEmbeded(dwIoBase, 0x0C, 0x00);//CR12
     BBbWriteEmbeded(dwIoBase, 0x0D, 0x01);//CR13
@@ -2651,12 +2651,12 @@ BBvExitDeepSleep (DWORD_PTR dwIoBase, BYTE byLocalID)
 
 
 static
-ULONG
+unsigned long
 s_ulGetRatio (PSDevice pDevice)
 {
-ULONG   ulRatio = 0;
-ULONG   ulMaxPacket;
-ULONG   ulPacketNum;
+unsigned long ulRatio = 0;
+unsigned long ulMaxPacket;
+unsigned long ulPacketNum;
 
     //This is a thousand-ratio
     ulMaxPacket = pDevice->uNumSQ3[RATE_54M];
@@ -2762,7 +2762,7 @@ ULONG   ulPacketNum;
 void
 BBvClearAntDivSQ3Value (PSDevice pDevice)
 {
-    UINT    ii;
+    unsigned int ii;
 
     pDevice->uDiversityCnt = 0;
     for (ii = 0; ii < MAX_RATE; ii++) {
@@ -2787,7 +2787,7 @@ BBvClearAntDivSQ3Value (PSDevice pDevice)
  */
 
 void
-BBvAntennaDiversity (PSDevice pDevice, BYTE byRxRate, BYTE bySQ3)
+BBvAntennaDiversity (PSDevice pDevice, unsigned char byRxRate, unsigned char bySQ3)
 {
 
     if ((byRxRate >= MAX_RATE) || (pDevice->wAntDiversityMaxRate >= MAX_RATE)) {
diff --git a/drivers/staging/vt6655/baseband.h b/drivers/staging/vt6655/baseband.h
index b236ff4139a..8294bdbb7b5 100644
--- a/drivers/staging/vt6655/baseband.h
+++ b/drivers/staging/vt6655/baseband.h
@@ -118,45 +118,45 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-UINT
+unsigned int
 BBuGetFrameTime(
-    BYTE byPreambleType,
-    BYTE byPktType,
-    UINT cbFrameLength,
-    WORD wRate
+    unsigned char byPreambleType,
+    unsigned char byPktType,
+    unsigned int cbFrameLength,
+    unsigned short wRate
     );
 
 void
 BBvCaculateParameter (
     PSDevice pDevice,
-    UINT cbFrameLength,
-    WORD wRate,
-    BYTE byPacketType,
-    PWORD pwPhyLen,
-    PBYTE pbyPhySrv,
-    PBYTE pbyPhySgn
+    unsigned int cbFrameLength,
+    unsigned short wRate,
+    unsigned char byPacketType,
+    unsigned short *pwPhyLen,
+    unsigned char *pbyPhySrv,
+    unsigned char *pbyPhySgn
     );
 
-BOOL BBbReadEmbeded(DWORD_PTR dwIoBase, BYTE byBBAddr, PBYTE pbyData);
-BOOL BBbWriteEmbeded(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byData);
+bool BBbReadEmbeded(unsigned long dwIoBase, unsigned char byBBAddr, unsigned char *pbyData);
+bool BBbWriteEmbeded(unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byData);
 
-void BBvReadAllRegs(DWORD_PTR dwIoBase, PBYTE pbyBBRegs);
+void BBvReadAllRegs(unsigned long dwIoBase, unsigned char *pbyBBRegs);
 void BBvLoopbackOn(PSDevice pDevice);
 void BBvLoopbackOff(PSDevice pDevice);
 void BBvSetShortSlotTime(PSDevice pDevice);
-BOOL BBbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits);
-BOOL BBbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byBBAddr, BYTE byTestBits);
-void BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData);
+bool BBbIsRegBitsOn(unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byTestBits);
+bool BBbIsRegBitsOff(unsigned long dwIoBase, unsigned char byBBAddr, unsigned char byTestBits);
+void BBvSetVGAGainOffset(PSDevice pDevice, unsigned char byData);
 
 // VT3253 Baseband
-BOOL BBbVT3253Init(PSDevice pDevice);
-void BBvSoftwareReset(DWORD_PTR dwIoBase);
-void BBvPowerSaveModeON(DWORD_PTR dwIoBase);
-void BBvPowerSaveModeOFF(DWORD_PTR dwIoBase);
-void BBvSetTxAntennaMode(DWORD_PTR dwIoBase, BYTE byAntennaMode);
-void BBvSetRxAntennaMode(DWORD_PTR dwIoBase, BYTE byAntennaMode);
-void BBvSetDeepSleep(DWORD_PTR dwIoBase, BYTE byLocalID);
-void BBvExitDeepSleep(DWORD_PTR dwIoBase, BYTE byLocalID);
+bool BBbVT3253Init(PSDevice pDevice);
+void BBvSoftwareReset(unsigned long dwIoBase);
+void BBvPowerSaveModeON(unsigned long dwIoBase);
+void BBvPowerSaveModeOFF(unsigned long dwIoBase);
+void BBvSetTxAntennaMode(unsigned long dwIoBase, unsigned char byAntennaMode);
+void BBvSetRxAntennaMode(unsigned long dwIoBase, unsigned char byAntennaMode);
+void BBvSetDeepSleep(unsigned long dwIoBase, unsigned char byLocalID);
+void BBvExitDeepSleep(unsigned long dwIoBase, unsigned char byLocalID);
 
 // timer for antenna diversity
 
@@ -170,7 +170,7 @@ TimerState1CallBack(
     void *hDeviceContext
     );
 
-void BBvAntennaDiversity(PSDevice pDevice, BYTE byRxRate, BYTE bySQ3);
+void BBvAntennaDiversity(PSDevice pDevice, unsigned char byRxRate, unsigned char bySQ3);
 void
 BBvClearAntDivSQ3Value (PSDevice pDevice);
 
diff --git a/drivers/staging/vt6655/bssdb.c b/drivers/staging/vt6655/bssdb.c
index 6312a55dab1..57c1cc90afc 100644
--- a/drivers/staging/vt6655/bssdb.c
+++ b/drivers/staging/vt6655/bssdb.c
@@ -53,6 +53,7 @@
 #include "baseband.h"
 #include "rf.h"
 #include "card.h"
+#include "channel.h"
 #include "mac.h"
 #include "wpa2.h"
 #include "iowpa.h"
@@ -71,14 +72,14 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 
 
-const WORD             awHWRetry0[5][5] = {
+const unsigned short awHWRetry0[5][5] = {
                                             {RATE_18M, RATE_18M, RATE_12M, RATE_12M, RATE_12M},
                                             {RATE_24M, RATE_24M, RATE_18M, RATE_12M, RATE_12M},
                                             {RATE_36M, RATE_36M, RATE_24M, RATE_18M, RATE_18M},
                                             {RATE_48M, RATE_48M, RATE_36M, RATE_24M, RATE_24M},
                                             {RATE_54M, RATE_54M, RATE_48M, RATE_36M, RATE_36M}
                                            };
-const WORD             awHWRetry1[5][5] = {
+const unsigned short awHWRetry1[5][5] = {
                                             {RATE_18M, RATE_18M, RATE_12M, RATE_6M, RATE_6M},
                                             {RATE_24M, RATE_24M, RATE_18M, RATE_6M, RATE_6M},
                                             {RATE_36M, RATE_36M, RATE_24M, RATE_12M, RATE_12M},
@@ -126,25 +127,25 @@ void s_vCheckPreEDThreshold(
 PKnownBSS
 BSSpSearchBSSList(
     void *hDeviceContext,
-    PBYTE pbyDesireBSSID,
-    PBYTE pbyDesireSSID,
+    unsigned char *pbyDesireBSSID,
+    unsigned char *pbyDesireSSID,
     CARD_PHY_TYPE  ePhyType
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    PBYTE           pbyBSSID = NULL;
+    unsigned char *pbyBSSID = NULL;
     PWLAN_IE_SSID   pSSID = NULL;
     PKnownBSS       pCurrBSS = NULL;
     PKnownBSS       pSelect = NULL;
-BYTE                 ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
-    UINT            ii = 0;
-//    UINT            jj = 0;   //DavidWang
+    unsigned char ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
+    unsigned int ii = 0;
+
     if (pbyDesireBSSID != NULL) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSSpSearchBSSList BSSID[%02X %02X %02X-%02X %02X %02X]\n",
                             *pbyDesireBSSID,*(pbyDesireBSSID+1),*(pbyDesireBSSID+2),
                             *(pbyDesireBSSID+3),*(pbyDesireBSSID+4),*(pbyDesireBSSID+5));
-        if ((!IS_BROADCAST_ADDRESS(pbyDesireBSSID)) &&
+        if ((!is_broadcast_ether_addr(pbyDesireBSSID)) &&
 	     (memcmp(pbyDesireBSSID, ZeroBSSID, 6)!= 0)){
             pbyBSSID = pbyDesireBSSID;
         }
@@ -159,10 +160,10 @@ BYTE                 ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
         // match BSSID first
         for (ii = 0; ii <MAX_BSS_NUM; ii++) {
             pCurrBSS = &(pMgmt->sBSSList[ii]);
-if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
+if(pDevice->bLinkPass==false) pCurrBSS->bSelected = false;
             if ((pCurrBSS->bActive) &&
-                (pCurrBSS->bSelected == FALSE)) {
-                if (IS_ETH_ADDRESS_EQUAL(pCurrBSS->abyBSSID, pbyBSSID)) {
+                (pCurrBSS->bSelected == false)) {
+                if (!compare_ether_addr(pCurrBSS->abyBSSID, pbyBSSID)) {
                     if (pSSID != NULL) {
                         // compare ssid
                         if ( !memcmp(pSSID->abySSID,
@@ -172,7 +173,7 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
                                 ((pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) && WLAN_GET_CAP_INFO_IBSS(pCurrBSS->wCapInfo)) ||
                                 ((pMgmt->eConfigMode == WMAC_CONFIG_ESS_STA) && WLAN_GET_CAP_INFO_ESS(pCurrBSS->wCapInfo))
                                 ) {
-                                pCurrBSS->bSelected = TRUE;
+                                pCurrBSS->bSelected = true;
                                 return(pCurrBSS);
                             }
                         }
@@ -181,7 +182,7 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
                             ((pMgmt->eConfigMode == WMAC_CONFIG_IBSS_STA) && WLAN_GET_CAP_INFO_IBSS(pCurrBSS->wCapInfo)) ||
                             ((pMgmt->eConfigMode == WMAC_CONFIG_ESS_STA) && WLAN_GET_CAP_INFO_ESS(pCurrBSS->wCapInfo))
                             ) {
-                            pCurrBSS->bSelected = TRUE;
+                            pCurrBSS->bSelected = true;
                             return(pCurrBSS);
                         }
                     }
@@ -193,7 +194,7 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
         for (ii = 0; ii <MAX_BSS_NUM; ii++) {
             pCurrBSS = &(pMgmt->sBSSList[ii]);
 	//2007-0721-01<Add>by MikeLiu
-	  pCurrBSS->bSelected = FALSE;
+	  pCurrBSS->bSelected = false;
           if (pCurrBSS->bActive) {
 
                 if (pSSID != NULL) {
@@ -224,19 +225,19 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
                 }
 /*
                 if (pMgmt->eAuthenMode < WMAC_AUTH_WPA) {
-                    if (pCurrBSS->bWPAValid == TRUE) {
+                    if (pCurrBSS->bWPAValid == true) {
                         // WPA AP will reject connection of station without WPA enable.
                         continue;
                     }
                 } else if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA) ||
                            (pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK)) {
-                    if (pCurrBSS->bWPAValid == FALSE) {
+                    if (pCurrBSS->bWPAValid == false) {
                         // station with WPA enable can't join NonWPA AP.
                         continue;
                     }
                 } else if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
                            (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {
-                    if (pCurrBSS->bWPA2Valid == FALSE) {
+                    if (pCurrBSS->bWPA2Valid == false) {
                         // station with WPA2 enable can't join NonWPA2 AP.
                         continue;
                     }
@@ -253,9 +254,9 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
             }
         }
         if (pSelect != NULL) {
-            pSelect->bSelected = TRUE;
+            pSelect->bSelected = true;
 /*
-                        if (pDevice->bRoaming == FALSE)  {
+                        if (pDevice->bRoaming == false)  {
 	//       Einsn Add @20070907
 			memset(pbyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
 			memcpy(pbyDesireSSID,pCurrBSS->abySSID,WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1) ;
@@ -283,18 +284,18 @@ if(pDevice->bLinkPass==FALSE) pCurrBSS->bSelected = FALSE;
 void
 BSSvClearBSSList(
     void *hDeviceContext,
-    BOOL bKeepCurrBSSID
+    bool bKeepCurrBSSID
     )
 {
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            ii;
+    unsigned int ii;
 
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         if (bKeepCurrBSSID) {
             if (pMgmt->sBSSList[ii].bActive &&
-                IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyCurrBSSID)) {
-               // bKeepCurrBSSID = FALSE;
+                !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyCurrBSSID)) {
+               // bKeepCurrBSSID = false;
                 continue;
             }
         }
@@ -304,7 +305,7 @@ BSSvClearBSSList(
              continue;
         }
 
-        pMgmt->sBSSList[ii].bActive = FALSE;
+        pMgmt->sBSSList[ii].bActive = false;
         memset(&pMgmt->sBSSList[ii], 0, sizeof(KnownBSS));
     }
     BSSvClearAnyBSSJoinRecord(pDevice);
@@ -320,25 +321,25 @@ BSSvClearBSSList(
  *    search BSS list by BSSID & SSID if matched
  *
  * Return Value:
- *    TRUE if found.
+ *    true if found.
  *
 -*/
 PKnownBSS
 BSSpAddrIsInBSSList(
     void *hDeviceContext,
-    PBYTE abyBSSID,
+    unsigned char *abyBSSID,
     PWLAN_IE_SSID pSSID
     )
 {
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PKnownBSS       pBSSList = NULL;
-    UINT            ii;
+    unsigned int ii;
 
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         pBSSList = &(pMgmt->sBSSList[ii]);
         if (pBSSList->bActive) {
-            if (IS_ETH_ADDRESS_EQUAL(pBSSList->abyBSSID, abyBSSID)) {
+            if (!compare_ether_addr(pBSSList->abyBSSID, abyBSSID)) {
 //                if (pSSID == NULL)
 //                    return pBSSList;
                 if (pSSID->len == ((PWLAN_IE_SSID)pBSSList->abySSID)->len){
@@ -362,18 +363,18 @@ BSSpAddrIsInBSSList(
  *    Insert a BSS set into known BSS list
  *
  * Return Value:
- *    TRUE if success.
+ *    true if success.
  *
 -*/
 
-BOOL
+bool
 BSSbInsertToBSSList (
     void *hDeviceContext,
-    PBYTE abyBSSIDAddr,
+    unsigned char *abyBSSIDAddr,
     QWORD qwTimestamp,
-    WORD wBeaconInterval,
-    WORD wCapInfo,
-    BYTE byCurrChannel,
+    unsigned short wBeaconInterval,
+    unsigned short wCapInfo,
+    unsigned char byCurrChannel,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pSuppRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates,
@@ -382,8 +383,8 @@ BSSbInsertToBSSList (
     PWLAN_IE_RSN_EXT pRSNWPA,
     PWLAN_IE_COUNTRY pIE_Country,
     PWLAN_IE_QUIET pIE_Quiet,
-    UINT uIELength,
-    PBYTE pbyIEs,
+    unsigned int uIELength,
+    unsigned char *pbyIEs,
     void *pRxPacketContext
     )
 {
@@ -392,8 +393,8 @@ BSSbInsertToBSSList (
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSRxMgmtPacket  pRxPacket = (PSRxMgmtPacket)pRxPacketContext;
     PKnownBSS       pBSSList = NULL;
-    UINT            ii;
-    BOOL            bParsingQuiet = FALSE;
+    unsigned int ii;
+    bool bParsingQuiet = false;
     PWLAN_IE_QUIET  pQuiet = NULL;
 
 
@@ -408,10 +409,10 @@ BSSbInsertToBSSList (
 
     if (ii == MAX_BSS_NUM){
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Get free KnowBSS node failed.\n");
-        return FALSE;
+        return false;
     }
     // save the BSS info
-    pBSSList->bActive = TRUE;
+    pBSSList->bActive = true;
     memcpy( pBSSList->abyBSSID, abyBSSIDAddr, WLAN_BSSID_LEN);
     HIDWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(HIDWORD(qwTimestamp));
     LODWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(LODWORD(qwTimestamp));
@@ -445,7 +446,7 @@ BSSbInsertToBSSList (
     if (pBSSList->uChannel > CB_MAX_CHANNEL_24G) {
         pBSSList->eNetworkTypeInUse = PHY_TYPE_11A;
     } else {
-        if (pBSSList->sERP.bERPExist == TRUE) {
+        if (pBSSList->sERP.bERPExist == true) {
             pBSSList->eNetworkTypeInUse = PHY_TYPE_11G;
         } else {
             pBSSList->eNetworkTypeInUse = PHY_TYPE_11B;
@@ -461,16 +462,16 @@ BSSbInsertToBSSList (
         (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
         // assoc with BSS
         if (pBSSList == pMgmt->pCurrBSS) {
-            bParsingQuiet = TRUE;
+            bParsingQuiet = true;
         }
     }
 
     WPA_ClearRSN(pBSSList);
 
     if (pRSNWPA != NULL) {
-        UINT uLen = pRSNWPA->len + 2;
+        unsigned int uLen = pRSNWPA->len + 2;
 
-        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSNWPA - pbyIEs))) {
+        if (uLen <= (uIELength - (unsigned int)((unsigned char *)pRSNWPA - pbyIEs))) {
             pBSSList->wWPALen = uLen;
             memcpy(pBSSList->byWPAIE, pRSNWPA, uLen);
             WPA_ParseRSN(pBSSList, pRSNWPA);
@@ -480,33 +481,33 @@ BSSbInsertToBSSList (
     WPA2_ClearRSN(pBSSList);
 
     if (pRSN != NULL) {
-        UINT uLen = pRSN->len + 2;
-        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSN - pbyIEs))) {
+        unsigned int uLen = pRSN->len + 2;
+        if (uLen <= (uIELength - (unsigned int)((unsigned char *)pRSN - pbyIEs))) {
             pBSSList->wRSNLen = uLen;
             memcpy(pBSSList->byRSNIE, pRSN, uLen);
             WPA2vParseRSN(pBSSList, pRSN);
         }
     }
 
-    if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) || (pBSSList->bWPA2Valid == TRUE)) {
+    if ((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) || (pBSSList->bWPA2Valid == true)) {
 
         PSKeyItem  pTransmitKey = NULL;
-        BOOL       bIs802_1x = FALSE;
+        bool bIs802_1x = false;
 
         for (ii = 0; ii < pBSSList->wAKMSSAuthCount; ii ++) {
             if (pBSSList->abyAKMSSAuthType[ii] == WLAN_11i_AKMSS_802_1X) {
-                bIs802_1x = TRUE;
+                bIs802_1x = true;
                 break;
             }
         }
-        if ((bIs802_1x == TRUE) && (pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len) &&
+        if ((bIs802_1x == true) && (pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len) &&
             ( !memcmp(pSSID->abySSID, ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySSID, pSSID->len))) {
 
             bAdd_PMKID_Candidate((void *)pDevice, pBSSList->abyBSSID, &pBSSList->sRSNCapObj);
 
-            if ((pDevice->bLinkPass == TRUE) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
-                if ((KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, PAIRWISE_KEY, &pTransmitKey) == TRUE) ||
-                    (KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, GROUP_KEY, &pTransmitKey) == TRUE)) {
+            if ((pDevice->bLinkPass == true) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
+                if ((KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, PAIRWISE_KEY, &pTransmitKey) == true) ||
+                    (KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBSSID, GROUP_KEY, &pTransmitKey) == true)) {
                     pDevice->gsPMKIDCandidate.StatusType = Ndis802_11StatusType_PMKID_CandidateList;
                     pDevice->gsPMKIDCandidate.Version = 1;
 
@@ -519,46 +520,45 @@ BSSbInsertToBSSList (
     if (pDevice->bUpdateBBVGA) {
         // Moniter if RSSI is too strong.
         pBSSList->byRSSIStatCnt = 0;
-        RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &pBSSList->ldBmMAX);
+        RFvRSSITodBm(pDevice, (unsigned char)(pRxPacket->uRSSI), &pBSSList->ldBmMAX);
         pBSSList->ldBmAverage[0] = pBSSList->ldBmMAX;
         for (ii = 1; ii < RSSI_STAT_COUNT; ii++)
             pBSSList->ldBmAverage[ii] = 0;
     }
 
     if ((pIE_Country != NULL) &&
-        (pMgmt->b11hEnable == TRUE)) {
-        CARDvSetCountryInfo(pMgmt->pAdapter,
-                            pBSSList->eNetworkTypeInUse,
+        (pMgmt->b11hEnable == true)) {
+        set_country_info(pMgmt->pAdapter, pBSSList->eNetworkTypeInUse,
                             pIE_Country);
     }
 
-    if ((bParsingQuiet == TRUE) && (pIE_Quiet != NULL)) {
+    if ((bParsingQuiet == true) && (pIE_Quiet != NULL)) {
         if ((((PWLAN_IE_QUIET)pIE_Quiet)->len == 8) &&
             (((PWLAN_IE_QUIET)pIE_Quiet)->byQuietCount != 0)) {
             // valid EID
             if (pQuiet == NULL) {
                 pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
                 CARDbSetQuiet(  pMgmt->pAdapter,
-                                TRUE,
+                                true,
                                 pQuiet->byQuietCount,
                                 pQuiet->byQuietPeriod,
-                                *((PWORD)pQuiet->abyQuietDuration),
-                                *((PWORD)pQuiet->abyQuietOffset)
+                                *((unsigned short *)pQuiet->abyQuietDuration),
+                                *((unsigned short *)pQuiet->abyQuietOffset)
                                 );
             } else {
                 pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
                 CARDbSetQuiet(  pMgmt->pAdapter,
-                                FALSE,
+                                false,
                                 pQuiet->byQuietCount,
                                 pQuiet->byQuietPeriod,
-                                *((PWORD)pQuiet->abyQuietDuration),
-                                *((PWORD)pQuiet->abyQuietOffset)
+                                *((unsigned short *)pQuiet->abyQuietDuration),
+                                *((unsigned short *)pQuiet->abyQuietOffset)
                                 );
             }
         }
     }
 
-    if ((bParsingQuiet == TRUE) &&
+    if ((bParsingQuiet == true) &&
         (pQuiet != NULL)) {
         CARDbStartQuiet(pMgmt->pAdapter);
     }
@@ -568,7 +568,7 @@ BSSbInsertToBSSList (
         pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
     memcpy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
 
-    return TRUE;
+    return true;
 }
 
 
@@ -578,19 +578,19 @@ BSSbInsertToBSSList (
  *    Update BSS set in known BSS list
  *
  * Return Value:
- *    TRUE if success.
+ *    true if success.
  *
 -*/
 // TODO: input structure modify
 
-BOOL
+bool
 BSSbUpdateToBSSList (
     void *hDeviceContext,
     QWORD qwTimestamp,
-    WORD wBeaconInterval,
-    WORD wCapInfo,
-    BYTE byCurrChannel,
-    BOOL bChannelHit,
+    unsigned short wBeaconInterval,
+    unsigned short wCapInfo,
+    unsigned char byCurrChannel,
+    bool bChannelHit,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pSuppRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates,
@@ -600,8 +600,8 @@ BSSbUpdateToBSSList (
     PWLAN_IE_COUNTRY pIE_Country,
     PWLAN_IE_QUIET pIE_Quiet,
     PKnownBSS pBSSList,
-    UINT uIELength,
-    PBYTE pbyIEs,
+    unsigned int uIELength,
+    unsigned char *pbyIEs,
     void *pRxPacketContext
     )
 {
@@ -609,14 +609,14 @@ BSSbUpdateToBSSList (
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSRxMgmtPacket  pRxPacket = (PSRxMgmtPacket)pRxPacketContext;
-    LONG            ldBm;
-    BOOL            bParsingQuiet = FALSE;
+    long            ldBm;
+    bool bParsingQuiet = false;
     PWLAN_IE_QUIET  pQuiet = NULL;
 
 
 
     if (pBSSList == NULL)
-        return FALSE;
+        return false;
 
 
     HIDWORD(pBSSList->qwBSSTimestamp) = cpu_to_le32(HIDWORD(qwTimestamp));
@@ -646,7 +646,7 @@ BSSbUpdateToBSSList (
     if (pBSSList->uChannel > CB_MAX_CHANNEL_24G) {
         pBSSList->eNetworkTypeInUse = PHY_TYPE_11A;
     } else {
-        if (pBSSList->sERP.bERPExist == TRUE) {
+        if (pBSSList->sERP.bERPExist == true) {
             pBSSList->eNetworkTypeInUse = PHY_TYPE_11G;
         } else {
             pBSSList->eNetworkTypeInUse = PHY_TYPE_11B;
@@ -663,15 +663,15 @@ BSSbUpdateToBSSList (
         (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
         // assoc with BSS
         if (pBSSList == pMgmt->pCurrBSS) {
-            bParsingQuiet = TRUE;
+            bParsingQuiet = true;
         }
     }
 
    WPA_ClearRSN(pBSSList);         //mike update
 
     if (pRSNWPA != NULL) {
-        UINT uLen = pRSNWPA->len + 2;
-        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSNWPA - pbyIEs))) {
+        unsigned int uLen = pRSNWPA->len + 2;
+        if (uLen <= (uIELength - (unsigned int)((unsigned char *)pRSNWPA - pbyIEs))) {
             pBSSList->wWPALen = uLen;
             memcpy(pBSSList->byWPAIE, pRSNWPA, uLen);
             WPA_ParseRSN(pBSSList, pRSNWPA);
@@ -681,8 +681,8 @@ BSSbUpdateToBSSList (
    WPA2_ClearRSN(pBSSList);  //mike update
 
     if (pRSN != NULL) {
-        UINT uLen = pRSN->len + 2;
-        if (uLen <= (uIELength - (UINT)(ULONG_PTR)((PBYTE)pRSN - pbyIEs))) {
+        unsigned int uLen = pRSN->len + 2;
+        if (uLen <= (uIELength - (unsigned int)((unsigned char *)pRSN - pbyIEs))) {
             pBSSList->wRSNLen = uLen;
             memcpy(pBSSList->byRSNIE, pRSN, uLen);
             WPA2vParseRSN(pBSSList, pRSN);
@@ -690,7 +690,7 @@ BSSbUpdateToBSSList (
     }
 
     if (pRxPacket->uRSSI != 0) {
-        RFvRSSITodBm(pDevice, (BYTE)(pRxPacket->uRSSI), &ldBm);
+        RFvRSSITodBm(pDevice, (unsigned char)(pRxPacket->uRSSI), &ldBm);
         // Moniter if RSSI is too strong.
         pBSSList->byRSSIStatCnt++;
         pBSSList->byRSSIStatCnt %= RSSI_STAT_COUNT;
@@ -703,39 +703,38 @@ BSSbUpdateToBSSList (
     }
 
     if ((pIE_Country != NULL) &&
-        (pMgmt->b11hEnable == TRUE)) {
-        CARDvSetCountryInfo(pMgmt->pAdapter,
-                            pBSSList->eNetworkTypeInUse,
+        (pMgmt->b11hEnable == true)) {
+        set_country_info(pMgmt->pAdapter, pBSSList->eNetworkTypeInUse,
                             pIE_Country);
     }
 
-    if ((bParsingQuiet == TRUE) && (pIE_Quiet != NULL)) {
+    if ((bParsingQuiet == true) && (pIE_Quiet != NULL)) {
         if ((((PWLAN_IE_QUIET)pIE_Quiet)->len == 8) &&
             (((PWLAN_IE_QUIET)pIE_Quiet)->byQuietCount != 0)) {
             // valid EID
             if (pQuiet == NULL) {
                 pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
                 CARDbSetQuiet(  pMgmt->pAdapter,
-                                TRUE,
+                                true,
                                 pQuiet->byQuietCount,
                                 pQuiet->byQuietPeriod,
-                                *((PWORD)pQuiet->abyQuietDuration),
-                                *((PWORD)pQuiet->abyQuietOffset)
+                                *((unsigned short *)pQuiet->abyQuietDuration),
+                                *((unsigned short *)pQuiet->abyQuietOffset)
                                 );
             } else {
                 pQuiet = (PWLAN_IE_QUIET)pIE_Quiet;
                 CARDbSetQuiet(  pMgmt->pAdapter,
-                                FALSE,
+                                false,
                                 pQuiet->byQuietCount,
                                 pQuiet->byQuietPeriod,
-                                *((PWORD)pQuiet->abyQuietDuration),
-                                *((PWORD)pQuiet->abyQuietOffset)
+                                *((unsigned short *)pQuiet->abyQuietDuration),
+                                *((unsigned short *)pQuiet->abyQuietOffset)
                                 );
             }
         }
     }
 
-    if ((bParsingQuiet == TRUE) &&
+    if ((bParsingQuiet == true) &&
         (pQuiet != NULL)) {
         CARDbStartQuiet(pMgmt->pAdapter);
     }
@@ -745,7 +744,7 @@ BSSbUpdateToBSSList (
         pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
     memcpy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
 
-    return TRUE;
+    return true;
 }
 
 
@@ -762,27 +761,24 @@ BSSbUpdateToBSSList (
  *
 -*/
 
-BOOL
-BSSDBbIsSTAInNodeDB(
-    void *pMgmtObject,
-    PBYTE abyDstAddr,
-    PUINT puNodeIndex
-    )
+bool
+BSSDBbIsSTAInNodeDB(void *pMgmtObject, unsigned char *abyDstAddr,
+		unsigned int *puNodeIndex)
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
-    UINT            ii;
+    unsigned int ii;
 
     // Index = 0 reserved for AP Node
     for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
         if (pMgmt->sNodeDBTable[ii].bActive) {
-            if (IS_ETH_ADDRESS_EQUAL(abyDstAddr, pMgmt->sNodeDBTable[ii].abyMACAddr)) {
+            if (!compare_ether_addr(abyDstAddr, pMgmt->sNodeDBTable[ii].abyMACAddr)) {
                 *puNodeIndex = ii;
-                return TRUE;
+                return true;
             }
         }
     }
 
-   return FALSE;
+   return false;
 };
 
 
@@ -798,17 +794,14 @@ BSSDBbIsSTAInNodeDB(
  *
 -*/
 void
-BSSvCreateOneNode(
-    void *hDeviceContext,
-    PUINT puNodeIndex
-    )
+BSSvCreateOneNode(void *hDeviceContext, unsigned int *puNodeIndex)
 {
 
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            ii;
-    UINT            BigestCount = 0;
-    UINT            SelectIndex;
+    unsigned int ii;
+    unsigned int BigestCount = 0;
+    unsigned int SelectIndex;
     struct sk_buff  *skb;
     // Index = 0 reserved for AP Node (In STA mode)
     // Index = 0 reserved for Broadcast/MultiCast (In AP mode)
@@ -840,7 +833,7 @@ BSSvCreateOneNode(
     }
 
     memset(&pMgmt->sNodeDBTable[*puNodeIndex], 0, sizeof(KnownNodeDB));
-    pMgmt->sNodeDBTable[*puNodeIndex].bActive = TRUE;
+    pMgmt->sNodeDBTable[*puNodeIndex].bActive = true;
     pMgmt->sNodeDBTable[*puNodeIndex].uRatePollTimeout = FALLBACK_POLL_SECOND;
     // for AP mode PS queue
     skb_queue_head_init(&pMgmt->sNodeDBTable[*puNodeIndex].sTxPSQueue);
@@ -865,13 +858,13 @@ BSSvCreateOneNode(
 void
 BSSvRemoveOneNode(
     void *hDeviceContext,
-    UINT uNodeIndex
+    unsigned int uNodeIndex
     )
 {
 
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
     struct sk_buff  *skb;
 
 
@@ -898,18 +891,18 @@ BSSvRemoveOneNode(
 void
 BSSvUpdateAPNode(
     void *hDeviceContext,
-    PWORD pwCapInfo,
+    unsigned short *pwCapInfo,
     PWLAN_IE_SUPP_RATES pSuppRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates
     )
 {
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            uRateLen = WLAN_RATES_MAXLEN;
+    unsigned int uRateLen = WLAN_RATES_MAXLEN;
 
     memset(&pMgmt->sNodeDBTable[0], 0, sizeof(KnownNodeDB));
 
-    pMgmt->sNodeDBTable[0].bActive = TRUE;
+    pMgmt->sNodeDBTable[0].bActive = true;
     if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
         uRateLen = WLAN_RATES_MAXLEN_11B;
     }
@@ -922,7 +915,7 @@ BSSvUpdateAPNode(
     RATEvParseMaxRate((void *)pDevice,
                        (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                        (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
-                       TRUE,
+                       true,
                        &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
                        &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
                        &(pMgmt->sNodeDBTable[0].wSuppRate),
@@ -969,13 +962,13 @@ BSSvAddMulticastNode(
     if (!pDevice->bEnableHostWEP)
         memset(&pMgmt->sNodeDBTable[0], 0, sizeof(KnownNodeDB));
     memset(pMgmt->sNodeDBTable[0].abyMACAddr, 0xff, WLAN_ADDR_LEN);
-    pMgmt->sNodeDBTable[0].bActive = TRUE;
-    pMgmt->sNodeDBTable[0].bPSEnable = FALSE;
+    pMgmt->sNodeDBTable[0].bActive = true;
+    pMgmt->sNodeDBTable[0].bPSEnable = false;
     skb_queue_head_init(&pMgmt->sNodeDBTable[0].sTxPSQueue);
     RATEvParseMaxRate((void *)pDevice,
                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
-                      TRUE,
+                      true,
                       &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
                       &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
                        &(pMgmt->sNodeDBTable[0].wSuppRate),
@@ -1008,8 +1001,8 @@ BSSvAddMulticastNode(
 -*/
  //2008-4-14 <add> by chester for led issue
  #ifdef FOR_LED_ON_NOTEBOOK
-BOOL cc=FALSE;
-UINT status;
+bool cc=false;
+unsigned int status;
 #endif
 void
 BSSvSecondCallBack(
@@ -1018,11 +1011,11 @@ BSSvSecondCallBack(
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            ii;
+    unsigned int ii;
     PWLAN_IE_SSID   pItemSSID, pCurrSSID;
-    UINT            uSleepySTACnt = 0;
-    UINT            uNonShortSlotSTACnt = 0;
-    UINT            uLongPreambleSTACnt = 0;
+    unsigned int uSleepySTACnt = 0;
+    unsigned int uNonShortSlotSTACnt = 0;
+    unsigned int uLongPreambleSTACnt = 0;
     viawget_wpa_header* wpahdr;  //DavidWang
 
     spin_lock_irq(&pDevice->lock);
@@ -1034,22 +1027,22 @@ BSSvSecondCallBack(
  //2008-4-14 <add> by chester for led issue
 #ifdef FOR_LED_ON_NOTEBOOK
 MACvGPIOIn(pDevice->PortOffset, &pDevice->byGPIO);
-if ((( !(pDevice->byGPIO & GPIO0_DATA)&&(pDevice->bHWRadioOff == FALSE))||((pDevice->byGPIO & GPIO0_DATA)&&(pDevice->bHWRadioOff == TRUE)))&&(cc==FALSE)){
-cc=TRUE;
+if ((( !(pDevice->byGPIO & GPIO0_DATA)&&(pDevice->bHWRadioOff == false))||((pDevice->byGPIO & GPIO0_DATA)&&(pDevice->bHWRadioOff == true)))&&(cc==false)){
+cc=true;
 }
-else if(cc==TRUE){
+else if(cc==true){
 
-if(pDevice->bHWRadioOff == TRUE){
+if(pDevice->bHWRadioOff == true){
             if ( !(pDevice->byGPIO & GPIO0_DATA))
 //||( !(pDevice->byGPIO & GPIO0_DATA) && (pDevice->byRadioCtl & EEP_RADIOCTL_INV)))
 {if(status==1) goto start;
 status=1;
 CARDbRadioPowerOff(pDevice);
-                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->sNodeDBTable[0].bActive = false;
                 pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
                 //netif_stop_queue(pDevice->dev);
-                pDevice->bLinkPass = FALSE;
+                pDevice->bLinkPass = false;
 
 }
   if (pDevice->byGPIO &GPIO0_DATA)
@@ -1064,11 +1057,11 @@ else{
 {if(status==3) goto start;
 status=3;
 CARDbRadioPowerOff(pDevice);
-                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->sNodeDBTable[0].bActive = false;
                 pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
                 //netif_stop_queue(pDevice->dev);
-                pDevice->bLinkPass = FALSE;
+                pDevice->bLinkPass = false;
 
 }
   if ( !(pDevice->byGPIO & GPIO0_DATA))
@@ -1092,11 +1085,11 @@ start:
 
 {
        pDevice->byReAssocCount++;
-   if((pDevice->byReAssocCount > 10) && (pDevice->bLinkPass != TRUE)) {  //10 sec timeout
+   if((pDevice->byReAssocCount > 10) && (pDevice->bLinkPass != true)) {  //10 sec timeout
                      printk("Re-association timeout!!!\n");
 		   pDevice->byReAssocCount = 0;
                      #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                    // if(pDevice->bWPASuppWextEnabled == true)
                         {
                   	union iwreq_data  wrqu;
                   	memset(&wrqu, 0, sizeof (wrqu));
@@ -1106,7 +1099,7 @@ start:
                        }
                     #endif
      }
-   else if(pDevice->bLinkPass == TRUE)
+   else if(pDevice->bLinkPass == true)
    	pDevice->byReAssocCount = 0;
 }
 
@@ -1200,27 +1193,27 @@ start:
         if (WLAN_GET_ERP_USE_PROTECTION(pDevice->byERPFlag)) {
             if (!pDevice->bProtectMode) {
                 MACvEnableProtectMD(pDevice->PortOffset);
-                pDevice->bProtectMode = TRUE;
+                pDevice->bProtectMode = true;
             }
         }
         else {
             if (pDevice->bProtectMode) {
                 MACvDisableProtectMD(pDevice->PortOffset);
-                pDevice->bProtectMode = FALSE;
+                pDevice->bProtectMode = false;
             }
         }
         // on/off short slot time
 
         if (uNonShortSlotSTACnt > 0) {
             if (pDevice->bShortSlotTime) {
-                pDevice->bShortSlotTime = FALSE;
+                pDevice->bShortSlotTime = false;
                 BBvSetShortSlotTime(pDevice);
                 vUpdateIFS((void *)pDevice);
             }
         }
         else {
             if (!pDevice->bShortSlotTime) {
-                pDevice->bShortSlotTime = TRUE;
+                pDevice->bShortSlotTime = true;
                 BBvSetShortSlotTime(pDevice);
                 vUpdateIFS((void *)pDevice);
             }
@@ -1231,13 +1224,13 @@ start:
         if (uLongPreambleSTACnt > 0) {
             if (!pDevice->bBarkerPreambleMd) {
                 MACvEnableBarkerPreambleMd(pDevice->PortOffset);
-                pDevice->bBarkerPreambleMd = TRUE;
+                pDevice->bBarkerPreambleMd = true;
             }
         }
         else {
             if (pDevice->bBarkerPreambleMd) {
                 MACvDisableBarkerPreambleMd(pDevice->PortOffset);
-                pDevice->bBarkerPreambleMd = FALSE;
+                pDevice->bBarkerPreambleMd = false;
             }
         }
 
@@ -1247,9 +1240,9 @@ start:
     // Check if any STA in PS mode, enable DTIM multicast deliver
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
         if (uSleepySTACnt > 0)
-            pMgmt->sNodeDBTable[0].bPSEnable = TRUE;
+            pMgmt->sNodeDBTable[0].bPSEnable = true;
         else
-            pMgmt->sNodeDBTable[0].bPSEnable = FALSE;
+            pMgmt->sNodeDBTable[0].bPSEnable = false;
     }
 
     pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
@@ -1276,12 +1269,12 @@ start:
     	    }
 
         	if (pMgmt->sNodeDBTable[0].uInActiveCount >= LOST_BEACON_COUNT) {
-                pMgmt->sNodeDBTable[0].bActive = FALSE;
+                pMgmt->sNodeDBTable[0].bActive = false;
                 pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
                 netif_stop_queue(pDevice->dev);
-                pDevice->bLinkPass = FALSE;
-                pDevice->bRoaming = TRUE;
+                pDevice->bLinkPass = false;
+                pDevice->bRoaming = true;
                 DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO "Lost AP beacon [%d] sec, disconnected !\n", pMgmt->sNodeDBTable[0].uInActiveCount);
         if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
              wpahdr = (viawget_wpa_header *)pDevice->skb->data;
@@ -1298,7 +1291,7 @@ start:
              pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
          };
    #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-  // if(pDevice->bWPASuppWextEnabled == TRUE)
+  // if(pDevice->bWPASuppWextEnabled == true)
       {
 	union iwreq_data  wrqu;
 	memset(&wrqu, 0, sizeof (wrqu));
@@ -1314,7 +1307,7 @@ start:
                 pDevice->uAutoReConnectTime++;
 	       #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
                 //network manager support need not do Roaming scan???
-                if(pDevice->bWPASuppWextEnabled ==TRUE)
+                if(pDevice->bWPASuppWextEnabled ==true)
 		 pDevice->uAutoReConnectTime = 0;
 	     #endif
             }
@@ -1358,7 +1351,7 @@ start:
                 pMgmt->sNodeDBTable[0].uInActiveCount = 0;
                 pMgmt->eCurrState = WMAC_STATE_STARTED;
                 netif_stop_queue(pDevice->dev);
-                pDevice->bLinkPass = FALSE;
+                pDevice->bLinkPass = false;
             }
         }
     }
@@ -1391,23 +1384,23 @@ start:
 void
 BSSvUpdateNodeTxCounter(
     void *hDeviceContext,
-    BYTE        byTsr0,
-    BYTE        byTsr1,
-    PBYTE       pbyBuffer,
-    UINT        uFIFOHeaderSize
+    unsigned char byTsr0,
+    unsigned char byTsr1,
+    unsigned char *pbyBuffer,
+    unsigned int uFIFOHeaderSize
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            uNodeIndex = 0;
-    BYTE            byTxRetry = (byTsr0 & TSR0_NCR);
+    unsigned int uNodeIndex = 0;
+    unsigned char byTxRetry = (byTsr0 & TSR0_NCR);
     PSTxBufHead     pTxBufHead;
     PS802_11Header  pMACHeader;
-    WORD            wRate;
-    WORD            wFallBackRate = RATE_1M;
-    BYTE            byFallBack;
-    UINT            ii;
-//	UINT		txRetryTemp;
+    unsigned short wRate;
+    unsigned short wFallBackRate = RATE_1M;
+    unsigned char byFallBack;
+    unsigned int ii;
+//	unsigned int txRetryTemp;
 //PLICE_DEBUG->
 	//txRetryTemp = byTxRetry;
 	//if (txRetryTemp== 8)
@@ -1584,14 +1577,14 @@ BSSvUpdateNodeTxCounter(
 void
 BSSvClearNodeDBTable(
     void *hDeviceContext,
-    UINT uStartIndex
+    unsigned int uStartIndex
     )
 
 {
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     struct sk_buff  *skb;
-    UINT            ii;
+    unsigned int ii;
 
     for (ii = uStartIndex; ii < (MAX_NODE_NUM + 1); ii++) {
         if (pMgmt->sNodeDBTable[ii].bActive) {
@@ -1629,8 +1622,8 @@ void s_vCheckSensitivity(
         pBSSList = BSSpAddrIsInBSSList(pDevice, pMgmt->abyCurrBSSID, (PWLAN_IE_SSID)pMgmt->abyCurrSSID);
         if (pBSSList != NULL) {
             // Updata BB Reg if RSSI is too strong.
-            LONG    LocalldBmAverage = 0;
-            LONG    uNumofdBm = 0;
+            long    LocalldBmAverage = 0;
+            long    uNumofdBm = 0;
             for (ii = 0; ii < RSSI_STAT_COUNT; ii++) {
                 if (pBSSList->ldBmAverage[ii] != 0) {
                     uNumofdBm ++;
@@ -1666,10 +1659,10 @@ BSSvClearAnyBSSJoinRecord (
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            ii;
+    unsigned int ii;
 
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
-        pMgmt->sBSSList[ii].bSelected = FALSE;
+        pMgmt->sBSSList[ii].bSelected = false;
     }
     return;
 }
@@ -1680,9 +1673,9 @@ void s_uCalculateLinkQual(
     )
 {
    PSDevice        pDevice = (PSDevice)hDeviceContext;
-   ULONG TxOkRatio, TxCnt;
-   ULONG RxOkRatio,RxCnt;
-   ULONG RssiRatio;
+   unsigned long TxOkRatio, TxCnt;
+   unsigned long RxOkRatio,RxCnt;
+   unsigned long RssiRatio;
    long ldBm;
 
 TxCnt = pDevice->scStatistic.TxNoRetryOkCount +
@@ -1693,7 +1686,7 @@ RxCnt = pDevice->scStatistic.RxFcsErrCnt +
 TxOkRatio = (TxCnt < 6) ? 4000:((pDevice->scStatistic.TxNoRetryOkCount * 4000) / TxCnt);
 RxOkRatio = (RxCnt < 6) ? 2000:((pDevice->scStatistic.RxOkCnt * 2000) / RxCnt);
 //decide link quality
-if(pDevice->bLinkPass !=TRUE)
+if(pDevice->bLinkPass !=true)
 {
  //  printk("s_uCalculateLinkQual-->Link disconnect and Poor quality**\n");
    pDevice->scStatistic.LinkQuality = 0;
@@ -1701,7 +1694,7 @@ if(pDevice->bLinkPass !=TRUE)
 }
 else
 {
-   RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+   RFvRSSITodBm(pDevice, (unsigned char)(pDevice->uCurrRSSI), &ldBm);
    if(-ldBm < 50)  {
    	RssiRatio = 4000;
      }
@@ -1735,8 +1728,8 @@ void s_vCheckPreEDThreshold(
         ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED))) {
         pBSSList = BSSpAddrIsInBSSList(pDevice, pMgmt->abyCurrBSSID, (PWLAN_IE_SSID)pMgmt->abyCurrSSID);
         if (pBSSList != NULL) {
-            pDevice->byBBPreEDRSSI = (BYTE) (~(pBSSList->ldBmAverRange) + 1);
-            //BBvUpdatePreEDThreshold(pDevice, FALSE);
+            pDevice->byBBPreEDRSSI = (unsigned char) (~(pBSSList->ldBmAverRange) + 1);
+            //BBvUpdatePreEDThreshold(pDevice, false);
         }
     }
     return;
diff --git a/drivers/staging/vt6655/bssdb.h b/drivers/staging/vt6655/bssdb.h
index e09ef876297..0af42118612 100644
--- a/drivers/staging/vt6655/bssdb.h
+++ b/drivers/staging/vt6655/bssdb.h
@@ -90,69 +90,69 @@ typedef enum _NDIS_802_11_NETWORK_TYPE
 
 
 typedef struct tagSERPObject {
-    BOOL    bERPExist;
-    BYTE    byERP;
+    bool bERPExist;
+    unsigned char byERP;
 }ERPObject, *PERPObject;
 
 
 typedef struct tagSRSNCapObject {
-    BOOL    bRSNCapExist;
-    WORD    wRSNCap;
+    bool bRSNCapExist;
+    unsigned short wRSNCap;
 }SRSNCapObject, *PSRSNCapObject;
 
 // BSS info(AP)
 #pragma pack(1)
 typedef struct tagKnownBSS {
     // BSS info
-    BOOL            bActive;
-    BYTE            abyBSSID[WLAN_BSSID_LEN];
-    UINT            uChannel;
-    BYTE            abySuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE            abyExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    UINT            uRSSI;
-    BYTE            bySQ;
-    WORD            wBeaconInterval;
-    WORD            wCapInfo;
-    BYTE            abySSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    BYTE            byRxRate;
-
-//    WORD            wATIMWindow;
-    BYTE            byRSSIStatCnt;
-    LONG            ldBmMAX;
-    LONG            ldBmAverage[RSSI_STAT_COUNT];
-    LONG            ldBmAverRange;
+    bool bActive;
+    unsigned char abyBSSID[WLAN_BSSID_LEN];
+    unsigned int	uChannel;
+    unsigned char abySuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char abyExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned int	uRSSI;
+    unsigned char bySQ;
+    unsigned short wBeaconInterval;
+    unsigned short wCapInfo;
+    unsigned char abySSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    unsigned char byRxRate;
+
+//    unsigned short wATIMWindow;
+    unsigned char byRSSIStatCnt;
+    long            ldBmMAX;
+    long            ldBmAverage[RSSI_STAT_COUNT];
+    long            ldBmAverRange;
     //For any BSSID selection improvment
-    BOOL            bSelected;
+    bool bSelected;
 
     //++ WPA informations
-    BOOL            bWPAValid;
-    BYTE            byGKType;
-    BYTE            abyPKType[4];
-    WORD            wPKCount;
-    BYTE            abyAuthType[4];
-    WORD            wAuthCount;
-    BYTE            byDefaultK_as_PK;
-    BYTE            byReplayIdx;
+    bool bWPAValid;
+    unsigned char byGKType;
+    unsigned char abyPKType[4];
+    unsigned short wPKCount;
+    unsigned char abyAuthType[4];
+    unsigned short wAuthCount;
+    unsigned char byDefaultK_as_PK;
+    unsigned char byReplayIdx;
     //--
 
     //++ WPA2 informations
-    BOOL            bWPA2Valid;
-    BYTE            byCSSGK;
-    WORD            wCSSPKCount;
-    BYTE            abyCSSPK[4];
-    WORD            wAKMSSAuthCount;
-    BYTE            abyAKMSSAuthType[4];
+    bool bWPA2Valid;
+    unsigned char byCSSGK;
+    unsigned short wCSSPKCount;
+    unsigned char abyCSSPK[4];
+    unsigned short wAKMSSAuthCount;
+    unsigned char abyAKMSSAuthType[4];
 
     //++  wpactl
-    BYTE            byWPAIE[MAX_WPA_IE_LEN];
-    BYTE            byRSNIE[MAX_WPA_IE_LEN];
-    WORD            wWPALen;
-    WORD            wRSNLen;
+    unsigned char byWPAIE[MAX_WPA_IE_LEN];
+    unsigned char byRSNIE[MAX_WPA_IE_LEN];
+    unsigned short wWPALen;
+    unsigned short wRSNLen;
 
     // Clear count
-    UINT            uClearCount;
-//    BYTE            abyIEs[WLAN_BEACON_FR_MAXLEN];
-    UINT            uIELength;
+    unsigned int	uClearCount;
+//    unsigned char abyIEs[WLAN_BEACON_FR_MAXLEN];
+    unsigned int	uIELength;
     QWORD           qwBSSTimestamp;
     QWORD           qwLocalTSF;     // local TSF timer
 
@@ -161,7 +161,7 @@ typedef struct tagKnownBSS {
 
     ERPObject       sERP;
     SRSNCapObject   sRSNCapObj;
-    BYTE            abyIEs[1024];   // don't move this field !!
+    unsigned char abyIEs[1024];   // don't move this field !!
 
 }__attribute__ ((__packed__))
 KnownBSS , *PKnownBSS;
@@ -181,59 +181,59 @@ typedef enum tagNODE_STATE {
 // STA node info
 typedef struct tagKnownNodeDB {
     // STA info
-    BOOL            bActive;
-    BYTE            abyMACAddr[WLAN_ADDR_LEN];
-    BYTE            abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
-    BYTE            abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
-    WORD            wTxDataRate;
-    BOOL            bShortPreamble;
-    BOOL            bERPExist;
-    BOOL            bShortSlotTime;
-    UINT            uInActiveCount;
-    WORD            wMaxBasicRate;     //Get from byTopOFDMBasicRate or byTopCCKBasicRate which depends on packetTyp.
-    WORD            wMaxSuppRate;      //Records the highest supported rate getting from SuppRates IE and ExtSuppRates IE in Beacon.
-    WORD            wSuppRate;
-    BYTE            byTopOFDMBasicRate;//Records the highest basic rate in OFDM mode
-    BYTE            byTopCCKBasicRate; //Records the highest basic rate in CCK mode
+    bool bActive;
+    unsigned char abyMACAddr[WLAN_ADDR_LEN];
+    unsigned char abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+    unsigned char abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+    unsigned short wTxDataRate;
+    bool bShortPreamble;
+    bool bERPExist;
+    bool bShortSlotTime;
+    unsigned int	uInActiveCount;
+    unsigned short wMaxBasicRate;     //Get from byTopOFDMBasicRate or byTopCCKBasicRate which depends on packetTyp.
+    unsigned short wMaxSuppRate;      //Records the highest supported rate getting from SuppRates IE and ExtSuppRates IE in Beacon.
+    unsigned short wSuppRate;
+    unsigned char byTopOFDMBasicRate;//Records the highest basic rate in OFDM mode
+    unsigned char byTopCCKBasicRate; //Records the highest basic rate in CCK mode
 
     // For AP mode
     struct sk_buff_head sTxPSQueue;
-    WORD            wCapInfo;
-    WORD            wListenInterval;
-    WORD            wAID;
+    unsigned short wCapInfo;
+    unsigned short wListenInterval;
+    unsigned short wAID;
     NODE_STATE      eNodeState;
-    BOOL            bPSEnable;
-    BOOL            bRxPSPoll;
-    BYTE            byAuthSequence;
-    ULONG           ulLastRxJiffer;
-    BYTE            bySuppRate;
-    DWORD           dwFlags;
-    WORD            wEnQueueCnt;
-
-    BOOL            bOnFly;
-    ULONGLONG       KeyRSC;
-    BYTE            byKeyIndex;
-    DWORD           dwKeyIndex;
-    BYTE            byCipherSuite;
-    DWORD           dwTSC47_16;
-    WORD            wTSC15_0;
-    UINT            uWepKeyLength;
-    BYTE            abyWepKey[WLAN_WEPMAX_KEYLEN];
+    bool bPSEnable;
+    bool bRxPSPoll;
+    unsigned char byAuthSequence;
+    unsigned long ulLastRxJiffer;
+    unsigned char bySuppRate;
+    unsigned long dwFlags;
+    unsigned short wEnQueueCnt;
+
+    bool bOnFly;
+    unsigned long long       KeyRSC;
+    unsigned char byKeyIndex;
+    unsigned long dwKeyIndex;
+    unsigned char byCipherSuite;
+    unsigned long dwTSC47_16;
+    unsigned short wTSC15_0;
+    unsigned int	uWepKeyLength;
+    unsigned char abyWepKey[WLAN_WEPMAX_KEYLEN];
     //
     // Auto rate fallback vars
-    BOOL            bIsInFallback;
-    UINT            uAverageRSSI;
-    UINT            uRateRecoveryTimeout;
-    UINT            uRatePollTimeout;
-    UINT            uTxFailures;
-    UINT            uTxAttempts;
-
-    UINT            uTxRetry;
-    UINT            uFailureRatio;
-    UINT            uRetryRatio;
-    UINT            uTxOk[MAX_RATE+1];
-    UINT            uTxFail[MAX_RATE+1];
-    UINT            uTimeCount;
+    bool bIsInFallback;
+    unsigned int	uAverageRSSI;
+    unsigned int	uRateRecoveryTimeout;
+    unsigned int	uRatePollTimeout;
+    unsigned int	uTxFailures;
+    unsigned int	uTxAttempts;
+
+    unsigned int	uTxRetry;
+    unsigned int	uFailureRatio;
+    unsigned int	uRetryRatio;
+    unsigned int	uTxOk[MAX_RATE+1];
+    unsigned int	uTxFail[MAX_RATE+1];
+    unsigned int	uTimeCount;
 
 } KnownNodeDB, *PKnownNodeDB;
 
@@ -245,32 +245,32 @@ typedef struct tagKnownNodeDB {
 PKnownBSS
 BSSpSearchBSSList(
     void *hDeviceContext,
-    PBYTE pbyDesireBSSID,
-    PBYTE pbyDesireSSID,
+    unsigned char *pbyDesireBSSID,
+    unsigned char *pbyDesireSSID,
     CARD_PHY_TYPE ePhyType
     );
 
 PKnownBSS
 BSSpAddrIsInBSSList(
     void *hDeviceContext,
-    PBYTE abyBSSID,
+    unsigned char *abyBSSID,
     PWLAN_IE_SSID pSSID
     );
 
 void
 BSSvClearBSSList(
     void *hDeviceContext,
-    BOOL bKeepCurrBSSID
+    bool bKeepCurrBSSID
     );
 
-BOOL
+bool
 BSSbInsertToBSSList(
     void *hDeviceContext,
-    PBYTE abyBSSIDAddr,
+    unsigned char *abyBSSIDAddr,
     QWORD qwTimestamp,
-    WORD wBeaconInterval,
-    WORD wCapInfo,
-    BYTE byCurrChannel,
+    unsigned short wBeaconInterval,
+    unsigned short wCapInfo,
+    unsigned char byCurrChannel,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pSuppRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates,
@@ -279,20 +279,20 @@ BSSbInsertToBSSList(
     PWLAN_IE_RSN_EXT pRSNWPA,
     PWLAN_IE_COUNTRY pIE_Country,
     PWLAN_IE_QUIET pIE_Quiet,
-    UINT uIELength,
-    PBYTE pbyIEs,
+    unsigned int uIELength,
+    unsigned char *pbyIEs,
     void *pRxPacketContext
     );
 
 
-BOOL
+bool
 BSSbUpdateToBSSList(
     void *hDeviceContext,
     QWORD qwTimestamp,
-    WORD wBeaconInterval,
-    WORD wCapInfo,
-    BYTE byCurrChannel,
-    BOOL bChannelHit,
+    unsigned short wBeaconInterval,
+    unsigned short wCapInfo,
+    unsigned char byCurrChannel,
+    bool bChannelHit,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pSuppRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates,
@@ -302,29 +302,23 @@ BSSbUpdateToBSSList(
     PWLAN_IE_COUNTRY pIE_Country,
     PWLAN_IE_QUIET pIE_Quiet,
     PKnownBSS pBSSList,
-    UINT uIELength,
-    PBYTE pbyIEs,
+    unsigned int uIELength,
+    unsigned char *pbyIEs,
     void *pRxPacketContext
     );
 
 
-BOOL
-BSSDBbIsSTAInNodeDB(
-    void *hDeviceContext,
-    PBYTE abyDstAddr,
-    PUINT puNodeIndex
-    );
+bool
+BSSDBbIsSTAInNodeDB(void *hDeviceContext, unsigned char *abyDstAddr,
+		unsigned int *puNodeIndex);
 
 void
-BSSvCreateOneNode(
-    void *hDeviceContext,
-    PUINT puNodeIndex
-    );
+BSSvCreateOneNode(void *hDeviceContext, unsigned int *puNodeIndex);
 
 void
 BSSvUpdateAPNode(
     void *hDeviceContext,
-    PWORD pwCapInfo,
+    unsigned short *pwCapInfo,
     PWLAN_IE_SUPP_RATES pItemRates,
     PWLAN_IE_SUPP_RATES pExtSuppRates
     );
@@ -339,16 +333,16 @@ BSSvSecondCallBack(
 void
 BSSvUpdateNodeTxCounter(
     void *hDeviceContext,
-    BYTE        byTsr0,
-    BYTE        byTsr1,
-    PBYTE       pbyBuffer,
-    UINT        uFIFOHeaderSize
+    unsigned char byTsr0,
+    unsigned char byTsr1,
+    unsigned char *pbyBuffer,
+    unsigned int uFIFOHeaderSize
     );
 
 void
 BSSvRemoveOneNode(
     void *hDeviceContext,
-    UINT uNodeIndex
+    unsigned int uNodeIndex
     );
 
 void
@@ -360,7 +354,7 @@ BSSvAddMulticastNode(
 void
 BSSvClearNodeDBTable(
     void *hDeviceContext,
-    UINT uStartIndex
+    unsigned int uStartIndex
     );
 
 void
diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c
index 7bc2d7654b0..32d095c4d51 100644
--- a/drivers/staging/vt6655/card.c
+++ b/drivers/staging/vt6655/card.c
@@ -56,6 +56,7 @@
 #include "key.h"
 #include "rc4.h"
 #include "country.h"
+#include "channel.h"
 
 /*---------------------  Static Definitions -------------------------*/
 
@@ -76,411 +77,39 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 #define C_CWMAX         1023    // slot time
 
-#define CARD_MAX_CHANNEL_TBL    56
-
 #define WAIT_BEACON_TX_DOWN_TMO         3    // Times
 
-typedef struct tagSChannelTblElement {
-    BYTE    byChannelNumber;
-    UINT    uFrequency;
-    BOOL    bValid;
-    BYTE    byMAP;
-}SChannelTblElement, *PSChannelTblElement;
-
                                                               //1M,   2M,   5M,  11M,  18M,  24M,  36M,  54M
-static BYTE abyDefaultSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+static unsigned char abyDefaultSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
                                                                     //6M,   9M,  12M,  48M
-static BYTE abyDefaultExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+static unsigned char abyDefaultExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
                                                               //6M,   9M,  12M,  18M,  24M,  36M,  48M,  54M
-static BYTE abyDefaultSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+static unsigned char abyDefaultSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
                                                               //1M,   2M,   5M,  11M,
-static BYTE abyDefaultSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
-
-
+static unsigned char abyDefaultSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
 
-/*---------------------  Static Classes  ----------------------------*/
 
 /*---------------------  Static Variables  --------------------------*/
 
 
-const WORD cwRXBCNTSFOff[MAX_RATE] =
+const unsigned short cwRXBCNTSFOff[MAX_RATE] =
 {17, 17, 17, 17, 34, 23, 17, 11, 8, 5, 4, 3};
 
-static SChannelTblElement sChannelTbl[CARD_MAX_CHANNEL_TBL+1] =
-{
-  {0,   0,    FALSE,    0},
-  {1,   2412, TRUE,     0},
-  {2,   2417, TRUE,     0},
-  {3,   2422, TRUE,     0},
-  {4,   2427, TRUE,     0},
-  {5,   2432, TRUE,     0},
-  {6,   2437, TRUE,     0},
-  {7,   2442, TRUE,     0},
-  {8,   2447, TRUE,     0},
-  {9,   2452, TRUE,     0},
-  {10,  2457, TRUE,     0},
-  {11,  2462, TRUE,     0},
-  {12,  2467, TRUE,     0},
-  {13,  2472, TRUE,     0},
-  {14,  2484, TRUE,     0},
-  {183, 4915, TRUE,     0},
-  {184, 4920, TRUE,     0},
-  {185, 4925, TRUE,     0},
-  {187, 4935, TRUE,     0},
-  {188, 4940, TRUE,     0},
-  {189, 4945, TRUE,     0},
-  {192, 4960, TRUE,     0},
-  {196, 4980, TRUE,     0},
-  {7,   5035, TRUE,     0},
-  {8,   5040, TRUE,     0},
-  {9,   5045, TRUE,     0},
-  {11,  5055, TRUE,     0},
-  {12,  5060, TRUE,     0},
-  {16,  5080, TRUE,     0},
-  {34,  5170, TRUE,     0},
-  {36,  5180, TRUE,     0},
-  {38,  5190, TRUE,     0},
-  {40,  5200, TRUE,     0},
-  {42,  5210, TRUE,     0},
-  {44,  5220, TRUE,     0},
-  {46,  5230, TRUE,     0},
-  {48,  5240, TRUE,     0},
-  {52,  5260, TRUE,     0},
-  {56,  5280, TRUE,     0},
-  {60,  5300, TRUE,     0},
-  {64,  5320, TRUE,     0},
-  {100, 5500, TRUE,     0},
-  {104, 5520, TRUE,     0},
-  {108, 5540, TRUE,     0},
-  {112, 5560, TRUE,     0},
-  {116, 5580, TRUE,     0},
-  {120, 5600, TRUE,     0},
-  {124, 5620, TRUE,     0},
-  {128, 5640, TRUE,     0},
-  {132, 5660, TRUE,     0},
-  {136, 5680, TRUE,     0},
-  {140, 5700, TRUE,     0},
-  {149, 5745, TRUE,     0},
-  {153, 5765, TRUE,     0},
-  {157, 5785, TRUE,     0},
-  {161, 5805, TRUE,     0},
-  {165, 5825, TRUE,     0}
-};
-
-
-/************************************************************************
- * The Radar regulation rules for each country
- ************************************************************************/
-SCountryTable ChannelRuleTab[CCODE_MAX+1] =
-{
-/************************************************************************
- * This table is based on Athero driver rules
- ************************************************************************/
-/* Country          Available channels, ended with 0                    */
-/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
-{CCODE_FCC,                     {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_TELEC,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  1,  0,  0,  1,  0,  1,  1,  0,  1,  0,  0,  1,  1,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0, 23,  0,  0, 23,  0, 23, 23,  0, 23,  0,  0, 23, 23, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ETSI,                    {'E','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_RESV3,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV4,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV5,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV6,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV7,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV8,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESV9,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESVa,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESVb,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESVc,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESVd,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RESVe,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ALLBAND,                 {' ',' '},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ALBANIA,                 {'A','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ALGERIA,                 {'D','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ARGENTINA,               {'A','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
-{CCODE_ARMENIA,                 {'A','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_AUSTRALIA,               {'A','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_AUSTRIA,                 {'A','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 15,  0, 15,  0, 15,  0, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_AZERBAIJAN,              {'A','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_BAHRAIN,                 {'B','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_BELARUS,                 {'B','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_BELGIUM,                 {'B','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_BELIZE,                  {'B','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_BOLIVIA,                 {'B','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_BRAZIL,                  {'B','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_BRUNEI_DARUSSALAM,       {'B','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_BULGARIA,                {'B','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23,  0,  0, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0}  },
-{CCODE_CANADA,                  {'C','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_CHILE,                   {'C','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17, 17, 17}  },
-{CCODE_CHINA,                   {'C','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_COLOMBIA,                {'C','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_COSTA_RICA,              {'C','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_CROATIA,                 {'H','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_CYPRUS,                  {'C','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_CZECH,                   {'C','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_DENMARK,                 {'D','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_DOMINICAN_REPUBLIC,      {'D','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_ECUADOR,                 {'E','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_EGYPT,                   {'E','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_EL_SALVADOR,             {'S','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ESTONIA,                 {'E','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_FINLAND,                 {'F','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_FRANCE,                  {'F','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_GERMANY,                 {'D','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_GREECE,                  {'G','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_GEORGIA,                 {'G','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_GUATEMALA,               {'G','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_HONDURAS,                {'H','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_HONG_KONG,               {'H','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_HUNGARY,                 {'H','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ICELAND,                 {'I','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_INDIA,                   {'I','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_INDONESIA,               {'I','D'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_IRAN,                    {'I','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_IRELAND,                 {'I','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_ITALY,                   {'I','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_ISRAEL,                  {'I','L'},  {   0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_JAPAN,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_JORDAN,                  {'J','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_KAZAKHSTAN,              {'K','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_KUWAIT,                  {'K','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_LATVIA,                  {'L','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_LEBANON,                 {'L','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_LEICHTENSTEIN,           {'L','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_LITHUANIA,               {'L','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_LUXEMBURG,               {'L','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_MACAU,                   {'M','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_MACEDONIA,               {'M','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_MALTA,                   {'M','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
-{CCODE_MALAYSIA,                {'M','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_MEXICO,                  {'M','X'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_MONACO,                  {'M','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_MOROCCO,                 {'M','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_NETHERLANDS,             {'N','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_NEW_ZEALAND,             {'N','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_NORTH_KOREA,             {'K','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
-{CCODE_NORWAY,                  {'N','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_OMAN,                    {'O','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_PAKISTAN,                {'P','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_PANAMA,                  {'P','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_PERU,                    {'P','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_PHILIPPINES,             {'P','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_POLAND,                  {'P','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_PORTUGAL,                {'P','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_PUERTO_RICO,             {'P','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_QATAR,                   {'Q','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ROMANIA,                 {'R','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_RUSSIA,                  {'R','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_SAUDI_ARABIA,            {'S','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_SINGAPORE,               {'S','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20, 20, 20, 20, 20}  },
-{CCODE_SLOVAKIA,                {'S','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
-{CCODE_SLOVENIA,                {'S','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_SOUTH_AFRICA,            {'Z','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_SOUTH_KOREA,             {'K','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
-{CCODE_SPAIN,                   {'E','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
-{CCODE_SWEDEN,                  {'S','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_SWITZERLAND,             {'C','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_SYRIA,                   {'S','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_TAIWAN,                  {'T','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
-{CCODE_THAILAND,                {'T','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
-{CCODE_TRINIDAD_TOBAGO,         {'T','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_TUNISIA,                 {'T','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_TURKEY,                  {'T','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_UK,                      {'G','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
-{CCODE_UKRAINE,                 {'U','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_UNITED_ARAB_EMIRATES,    {'A','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_UNITED_STATES,           {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
-                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
-{CCODE_URUGUAY,                 {'U','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
-{CCODE_UZBEKISTAN,              {'U','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_VENEZUELA,               {'V','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
-                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
-{CCODE_VIETNAM,                 {'V','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_YEMEN,                   {'Y','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_ZIMBABWE,                {'Z','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_JAPAN_W52_W53,           {'J','J'},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
-{CCODE_MAX,                     {'U','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
-                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  }
-/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
-};
-
 
 /*---------------------  Static Functions  --------------------------*/
 
 static
 void
 s_vCaculateOFDMRParameter(
-    BYTE byRate,
+    unsigned char byRate,
     CARD_PHY_TYPE ePHYType,
-    PBYTE pbyTxRate,
-    PBYTE pbyRsvTime
+    unsigned char *pbyTxRate,
+    unsigned char *pbyRsvTime
     );
 
 
-/*---------------------  Export Variables  --------------------------*/
-
 /*---------------------  Export Functions  --------------------------*/
 
-
-/*---------------------  Export function  -------------------------*/
-/************************************************************************
- * Country Channel Valid
- *  Input:  CountryCode, ChannelNum
- *          ChanneIndex is defined as VT3253 MAC channel:
- *              1   = 2.4G channel 1
- *              2   = 2.4G channel 2
- *              ...
- *              14  = 2.4G channel 14
- *              15  = 4.9G channel 183
- *              16  = 4.9G channel 184
- *              .....
- *  Output: TRUE if the specified 5GHz band is allowed to be used.
-            False otherwise.
-// 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196 (Value:15 ~ 22)
-
-// 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
-// 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 (Value 23 ~ 56)
- ************************************************************************/
-//2008-8-4 <add> by chester
-BOOL
-ChannelValid(UINT CountryCode, UINT ChannelIndex)
-{
-    BOOL    bValid;
-
-    bValid = FALSE;
-    /*
-     * If Channel Index is invalid, return invalid
-     */
-    if ((ChannelIndex > CB_MAX_CHANNEL) ||
-        (ChannelIndex == 0))
-    {
-        bValid = FALSE;
-        goto exit;
-    }
-
-    bValid = sChannelTbl[ChannelIndex].bValid;
-
-exit:
-    return (bValid);
-
-} /* end ChannelValid */
-
-
 /*
  * Description: Caculate TxRate and RsvTime fields for RSPINF in OFDM mode.
  *
@@ -498,10 +127,10 @@ exit:
 static
 void
 s_vCaculateOFDMRParameter (
-    BYTE byRate,
+    unsigned char byRate,
     CARD_PHY_TYPE ePHYType,
-    PBYTE pbyTxRate,
-    PBYTE pbyRsvTime
+    unsigned char *pbyTxRate,
+    unsigned char *pbyRsvTime
     )
 {
     switch (byRate) {
@@ -614,9 +243,9 @@ static
 void
 s_vSetRSPINF (PSDevice pDevice, CARD_PHY_TYPE ePHYType, void *pvSupportRateIEs, void *pvExtSupportRateIEs)
 {
-    BYTE  byServ = 0, bySignal = 0; // For CCK
-    WORD  wLen = 0;
-    BYTE  byTxRate = 0, byRsvTime = 0;    // For OFDM
+    unsigned char byServ = 0, bySignal = 0; // For CCK
+    unsigned short wLen = 0;
+    unsigned char byTxRate = 0, byRsvTime = 0;    // For OFDM
 
     //Set to Page1
     MACvSelectPage1(pDevice->PortOffset);
@@ -722,120 +351,7 @@ s_vSetRSPINF (PSDevice pDevice, CARD_PHY_TYPE ePHYType, void *pvSupportRateIEs,
     MACvSelectPage0(pDevice->PortOffset);
 }
 
-
-
-
-/*---------------------  Export Variables  --------------------------*/
-
 /*---------------------  Export Functions  --------------------------*/
-BYTE CARDbyGetChannelMapping (void *pDeviceHandler, BYTE byChannelNumber, CARD_PHY_TYPE ePhyType)
-{
-    UINT        ii;
-
-    if ((ePhyType == PHY_TYPE_11B) || (ePhyType == PHY_TYPE_11G)) {
-        return (byChannelNumber);
-    }
-
-    for(ii = (CB_MAX_CHANNEL_24G + 1); ii <= CB_MAX_CHANNEL; ) {
-        if (sChannelTbl[ii].byChannelNumber == byChannelNumber) {
-            return ((BYTE) ii);
-        }
-        ii++;
-    }
-    return (0);
-}
-
-
-BYTE CARDbyGetChannelNumber (void *pDeviceHandler, BYTE byChannelIndex)
-{
-//    PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    return(sChannelTbl[byChannelIndex].byChannelNumber);
-}
-
-/*
- * Description: Set NIC media channel
- *
- * Parameters:
- *  In:
- *      pDeviceHandler      - The adapter to be set
- *      uConnectionChannel  - Channel to be set
- *  Out:
- *      none
- *
- * Return Value: TRUE if succeeded; FALSE if failed.
- *
- */
-BOOL CARDbSetChannel (void *pDeviceHandler, UINT uConnectionChannel)
-{
-    PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BOOL        bResult = TRUE;
-
-
-    if (pDevice->byCurrentCh == uConnectionChannel) {
-        return bResult;
-    }
-
-    if (sChannelTbl[uConnectionChannel].bValid == FALSE) {
-        return (FALSE);
-    }
-
-    if ((uConnectionChannel > CB_MAX_CHANNEL_24G) &&
-        (pDevice->eCurrentPHYType != PHY_TYPE_11A)) {
-        CARDbSetPhyParameter(pDevice, PHY_TYPE_11A, 0, 0, NULL, NULL);
-    } else if ((uConnectionChannel <= CB_MAX_CHANNEL_24G) &&
-        (pDevice->eCurrentPHYType == PHY_TYPE_11A)) {
-        CARDbSetPhyParameter(pDevice, PHY_TYPE_11G, 0, 0, NULL, NULL);
-    }
-    // clear NAV
-    MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MACCR, MACCR_CLRNAV);
-
-    //{{ RobertYu: 20041202
-    //// TX_PE will reserve 3 us for MAX2829 A mode only, it is for better TX throughput
-
-    if ( pDevice->byRFType == RF_AIROHA7230 )
-    {
-        RFbAL7230SelectChannelPostProcess(pDevice->PortOffset, pDevice->byCurrentCh, (BYTE)uConnectionChannel);
-    }
-    //}} RobertYu
-
-
-    pDevice->byCurrentCh = (BYTE)uConnectionChannel;
-    bResult &= RFbSelectChannel(pDevice->PortOffset, pDevice->byRFType, (BYTE)uConnectionChannel);
-
-    // Init Synthesizer Table
-    if (pDevice->bEnablePSMode == TRUE)
-        RFvWriteWakeProgSyn(pDevice->PortOffset, pDevice->byRFType, uConnectionChannel);
-
-
-    //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDbSetMediaChannel: %d\n", (BYTE)uConnectionChannel);
-    BBvSoftwareReset(pDevice->PortOffset);
-
-    if (pDevice->byLocalID > REV_ID_VT3253_B1) {
-        // set HW default power register
-        MACvSelectPage1(pDevice->PortOffset);
-        RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWRCCK, pDevice->byCurPwr);
-        RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWROFDM, pDevice->byCurPwr);
-        MACvSelectPage0(pDevice->PortOffset);
-    }
-
-    if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
-#ifdef	PLICE_DEBUG
-	//printk("Func:CARDbSetChannel:call RFbSetPower:11B\n");
-#endif
-        RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
-    } else {
-#ifdef	PLICE_DEBUG
-	//printk("Func:CARDbSetChannel:call RFbSetPower\n");
-#endif
-		RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
-    }
-
-    return(bResult);
-}
-
-
 
 /*
  * Description: Card Send packet function
@@ -849,11 +365,11 @@ BOOL CARDbSetChannel (void *pDeviceHandler, UINT uConnectionChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 /*
-BOOL CARDbSendPacket (void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktType, UINT uLength)
+bool CARDbSendPacket (void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktType, unsigned int uLength)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
     if (ePktType == PKT_TYPE_802_11_MNG) {
@@ -864,7 +380,7 @@ BOOL CARDbSendPacket (void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktTyp
         return TXbTD1Send(pDevice, pPacket, uLength);
     }
 
-    return (TRUE);
+    return (true);
 }
 */
 
@@ -878,16 +394,16 @@ BOOL CARDbSendPacket (void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktTyp
  *  Out:
  *      none
  *
- * Return Value: TRUE if short preamble; otherwise FALSE
+ * Return Value: true if short preamble; otherwise false
  *
  */
-BOOL CARDbIsShortPreamble (void *pDeviceHandler)
+bool CARDbIsShortPreamble (void *pDeviceHandler)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
     if (pDevice->byPreambleType == 0) {
-        return(FALSE);
+        return(false);
     }
-    return(TRUE);
+    return(true);
 }
 
 /*
@@ -899,10 +415,10 @@ BOOL CARDbIsShortPreamble (void *pDeviceHandler)
  *  Out:
  *      none
  *
- * Return Value: TRUE if short slot time; otherwise FALSE
+ * Return Value: true if short slot time; otherwise false
  *
  */
-BOOL CARDbIsShorSlotTime (void *pDeviceHandler)
+bool CARDbIsShorSlotTime (void *pDeviceHandler)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
     return(pDevice->bShortSlotTime);
@@ -921,14 +437,14 @@ BOOL CARDbIsShorSlotTime (void *pDeviceHandler)
  * Return Value: None.
  *
  */
-BOOL CARDbSetPhyParameter (void *pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wCapInfo, BYTE byERPField, void *pvSupportRateIEs, void *pvExtSupportRateIEs)
+bool CARDbSetPhyParameter (void *pDeviceHandler, CARD_PHY_TYPE ePHYType, unsigned short wCapInfo, unsigned char byERPField, void *pvSupportRateIEs, void *pvExtSupportRateIEs)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BYTE        byCWMaxMin = 0;
-    BYTE        bySlot = 0;
-    BYTE        bySIFS = 0;
-    BYTE        byDIFS = 0;
-    BYTE        byData;
+    unsigned char byCWMaxMin = 0;
+    unsigned char bySlot = 0;
+    unsigned char bySIFS = 0;
+    unsigned char byDIFS = 0;
+    unsigned char byData;
 //    PWLAN_IE_SUPP_RATES pRates = NULL;
     PWLAN_IE_SUPP_RATES pSupportRates = (PWLAN_IE_SUPP_RATES) pvSupportRateIEs;
     PWLAN_IE_SUPP_RATES pExtSupportRates = (PWLAN_IE_SUPP_RATES) pvExtSupportRateIEs;
@@ -1071,9 +587,9 @@ BOOL CARDbSetPhyParameter (void *pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wC
         pDevice->bySlot = bySlot;
         VNSvOutPortB(pDevice->PortOffset + MAC_REG_SLOT, pDevice->bySlot);
         if (pDevice->bySlot == C_SLOT_SHORT) {
-            pDevice->bShortSlotTime = TRUE;
+            pDevice->bShortSlotTime = true;
         } else {
-            pDevice->bShortSlotTime = FALSE;
+            pDevice->bShortSlotTime = false;
         }
         BBvSetShortSlotTime(pDevice);
     }
@@ -1089,7 +605,7 @@ BOOL CARDbSetPhyParameter (void *pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wC
     s_vSetRSPINF(pDevice, ePHYType, pSupportRates, pExtSupportRates);
     pDevice->eCurrentPHYType = ePHYType;
     // set for NDIS OID_802_11SUPPORTED_RATES
-    return (TRUE);
+    return (true);
 }
 
 /*
@@ -1108,7 +624,7 @@ BOOL CARDbSetPhyParameter (void *pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wC
  * Return Value: none
  *
  */
-BOOL CARDbUpdateTSF (void *pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF)
+bool CARDbUpdateTSF (void *pDeviceHandler, unsigned char byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
     QWORD       qwTSFOffset;
@@ -1125,7 +641,7 @@ BOOL CARDbUpdateTSF (void *pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp,
         VNSvOutPortD(pDevice->PortOffset + MAC_REG_TSFOFST + 4, HIDWORD(qwTSFOffset));
         MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_TSFSYNCEN);
     }
-    return(TRUE);
+    return(true);
 }
 
 
@@ -1140,16 +656,16 @@ BOOL CARDbUpdateTSF (void *pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp,
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeed; otherwise FALSE
+ * Return Value: true if succeed; otherwise false
  *
  */
-BOOL CARDbSetBeaconPeriod (void *pDeviceHandler, WORD wBeaconInterval)
+bool CARDbSetBeaconPeriod (void *pDeviceHandler, unsigned short wBeaconInterval)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        uBeaconInterval = 0;
-    UINT        uLowNextTBTT = 0;
-    UINT        uHighRemain = 0;
-    UINT        uLowRemain = 0;
+    unsigned int uBeaconInterval = 0;
+    unsigned int uLowNextTBTT = 0;
+    unsigned int uHighRemain = 0;
+    unsigned int uLowRemain = 0;
     QWORD       qwNextTBTT;
 
     HIDWORD(qwNextTBTT) = 0;
@@ -1179,7 +695,7 @@ BOOL CARDbSetBeaconPeriod (void *pDeviceHandler, WORD wBeaconInterval)
     VNSvOutPortD(pDevice->PortOffset + MAC_REG_NEXTTBTT + 4, HIDWORD(qwNextTBTT));
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TFTCTL, TFTCTL_TBTTSYNCEN);
 
-    return(TRUE);
+    return(true);
 }
 
 
@@ -1194,51 +710,51 @@ BOOL CARDbSetBeaconPeriod (void *pDeviceHandler, WORD wBeaconInterval)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all data packet complete; otherwise FALSE.
+ * Return Value: true if all data packet complete; otherwise false.
  *
  */
-BOOL CARDbStopTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
+bool CARDbStopTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
 
     if (ePktType == PKT_TYPE_802_11_ALL) {
-        pDevice->bStopBeacon = TRUE;
-        pDevice->bStopTx0Pkt = TRUE;
-        pDevice->bStopDataPkt = TRUE;
+        pDevice->bStopBeacon = true;
+        pDevice->bStopTx0Pkt = true;
+        pDevice->bStopDataPkt = true;
     } else if (ePktType == PKT_TYPE_802_11_BCN) {
-        pDevice->bStopBeacon = TRUE;
+        pDevice->bStopBeacon = true;
     } else if (ePktType == PKT_TYPE_802_11_MNG) {
-        pDevice->bStopTx0Pkt = TRUE;
+        pDevice->bStopTx0Pkt = true;
     } else if (ePktType == PKT_TYPE_802_11_DATA) {
-        pDevice->bStopDataPkt = TRUE;
+        pDevice->bStopDataPkt = true;
     }
 
-    if (pDevice->bStopBeacon == TRUE) {
-        if (pDevice->bIsBeaconBufReadySet == TRUE) {
+    if (pDevice->bStopBeacon == true) {
+        if (pDevice->bIsBeaconBufReadySet == true) {
             if (pDevice->cbBeaconBufReadySetCnt < WAIT_BEACON_TX_DOWN_TMO) {
                 pDevice->cbBeaconBufReadySetCnt ++;
-                return(FALSE);
+                return(false);
             }
         }
-        pDevice->bIsBeaconBufReadySet = FALSE;
+        pDevice->bIsBeaconBufReadySet = false;
         pDevice->cbBeaconBufReadySetCnt = 0;
         MACvRegBitsOff(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
     }
     // wait all TD0 complete
-    if (pDevice->bStopTx0Pkt == TRUE) {
+    if (pDevice->bStopTx0Pkt == true) {
          if (pDevice->iTDUsed[TYPE_TXDMA0] != 0){
-            return(FALSE);
+            return(false);
         }
     }
     // wait all Data TD complete
-    if (pDevice->bStopDataPkt == TRUE) {
+    if (pDevice->bStopDataPkt == true) {
         if (pDevice->iTDUsed[TYPE_AC0DMA] != 0){
-            return(FALSE);
+            return(false);
         }
     }
 
-    return(TRUE);
+    return(true);
 }
 
 
@@ -1252,33 +768,33 @@ BOOL CARDbStopTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; FALSE if failed.
+ * Return Value: true if success; false if failed.
  *
  */
-BOOL CARDbStartTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
+bool CARDbStartTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
 
     if (ePktType == PKT_TYPE_802_11_ALL) {
-        pDevice->bStopBeacon = FALSE;
-        pDevice->bStopTx0Pkt = FALSE;
-        pDevice->bStopDataPkt = FALSE;
+        pDevice->bStopBeacon = false;
+        pDevice->bStopTx0Pkt = false;
+        pDevice->bStopDataPkt = false;
     } else if (ePktType == PKT_TYPE_802_11_BCN) {
-        pDevice->bStopBeacon = FALSE;
+        pDevice->bStopBeacon = false;
     } else if (ePktType == PKT_TYPE_802_11_MNG) {
-        pDevice->bStopTx0Pkt = FALSE;
+        pDevice->bStopTx0Pkt = false;
     } else if (ePktType == PKT_TYPE_802_11_DATA) {
-        pDevice->bStopDataPkt = FALSE;
+        pDevice->bStopDataPkt = false;
     }
 
-    if ((pDevice->bStopBeacon == FALSE) &&
-        (pDevice->bBeaconBufReady == TRUE) &&
+    if ((pDevice->bStopBeacon == false) &&
+        (pDevice->bBeaconBufReady == true) &&
         (pDevice->eOPMode == OP_MODE_ADHOC)) {
         MACvRegBitsOn(pDevice->PortOffset, MAC_REG_TCR, TCR_AUTOBCNTX);
     }
 
-    return(TRUE);
+    return(true);
 }
 
 
@@ -1294,10 +810,10 @@ BOOL CARDbStartTxPacket (void *pDeviceHandler, CARD_PKT_TYPE ePktType)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; FALSE if failed.
+ * Return Value: true if success; false if failed.
  *
  */
-BOOL CARDbSetBSSID(void *pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode)
+bool CARDbSetBSSID(void *pDeviceHandler, unsigned char *pbyBSSID, CARD_OP_MODE eOPMode)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
@@ -1315,20 +831,20 @@ BOOL CARDbSetBSSID(void *pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode)
     }
     if (eOPMode == OP_MODE_UNKNOWN) {
         MACvRegBitsOff(pDevice->PortOffset, MAC_REG_RCR, RCR_BSSID);
-        pDevice->bBSSIDFilter = FALSE;
+        pDevice->bBSSIDFilter = false;
         pDevice->byRxMode &= ~RCR_BSSID;
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wcmd: rx_mode = %x\n", pDevice->byRxMode );
     } else {
-        if (IS_NULL_ADDRESS(pDevice->abyBSSID) == FALSE) {
+        if (is_zero_ether_addr(pDevice->abyBSSID) == false) {
             MACvRegBitsOn(pDevice->PortOffset, MAC_REG_RCR, RCR_BSSID);
-            pDevice->bBSSIDFilter = TRUE;
+            pDevice->bBSSIDFilter = true;
             pDevice->byRxMode |= RCR_BSSID;
 	    }
 	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wmgr: rx_mode = %x\n", pDevice->byRxMode );
     }
     // Adopt BSS state in Adapter Device Object
     pDevice->eOPMode = eOPMode;
-    return(TRUE);
+    return(true);
 }
 
 
@@ -1342,7 +858,7 @@ BOOL CARDbSetBSSID(void *pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; FALSE if failed.
+ * Return Value: true if success; false if failed.
  *
  */
 
@@ -1363,18 +879,18 @@ BOOL CARDbSetBSSID(void *pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeed; otherwise FALSE
+ * Return Value: true if succeed; otherwise false
  *
  */
-BOOL CARDbSetTxDataRate(
+bool CARDbSetTxDataRate(
     void *pDeviceHandler,
-    WORD    wDataRate
+    unsigned short wDataRate
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
     pDevice->wCurrentRate = wDataRate;
-    return(TRUE);
+    return(true);
 }
 
 /*+
@@ -1388,20 +904,20 @@ BOOL CARDbSetTxDataRate(
  *  Out:
  *      none
  *
- * Return Value: TRUE if power down success; otherwise FALSE
+ * Return Value: true if power down success; otherwise false
  *
 -*/
-BOOL
+bool
 CARDbPowerDown(
     void *pDeviceHandler
     )
 {
     PSDevice        pDevice = (PSDevice)pDeviceHandler;
-    UINT            uIdx;
+    unsigned int uIdx;
 
     // check if already in Doze mode
     if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS))
-        return TRUE;
+        return true;
 
     // Froce PSEN on
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
@@ -1410,12 +926,12 @@ CARDbPowerDown(
 
     for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
         if (pDevice->iTDUsed[uIdx] != 0)
-            return FALSE;
+            return false;
     }
 
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_GO2DOZE);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Go to Doze ZZZZZZZZZZZZZZZ\n");
-    return TRUE;
+    return true;
 }
 
 /*
@@ -1427,16 +943,16 @@ CARDbPowerDown(
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL CARDbRadioPowerOff (void *pDeviceHandler)
+bool CARDbRadioPowerOff (void *pDeviceHandler)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BOOL        bResult = TRUE;
+    bool bResult = true;
 
-    if (pDevice->bRadioOff == TRUE)
-        return TRUE;
+    if (pDevice->bRadioOff == true)
+        return true;
 
 
     switch (pDevice->byRFType) {
@@ -1459,7 +975,7 @@ BOOL CARDbRadioPowerOff (void *pDeviceHandler)
 
     BBvSetDeepSleep(pDevice->PortOffset, pDevice->byLocalID);
 
-    pDevice->bRadioOff = TRUE;
+    pDevice->bRadioOff = true;
      //2007-0409-03,<Add> by chester
 printk("chester power off\n");
 MACvRegBitsOn(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET);  //LED issue
@@ -1476,23 +992,23 @@ MACvRegBitsOn(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET);  //LED issue
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL CARDbRadioPowerOn (void *pDeviceHandler)
+bool CARDbRadioPowerOn (void *pDeviceHandler)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BOOL        bResult = TRUE;
+    bool bResult = true;
 printk("chester power on\n");
-    if (pDevice->bRadioControlOff == TRUE){
-if (pDevice->bHWRadioOff == TRUE) printk("chester bHWRadioOff\n");
-if (pDevice->bRadioControlOff == TRUE) printk("chester bRadioControlOff\n");
-        return FALSE;}
+    if (pDevice->bRadioControlOff == true){
+if (pDevice->bHWRadioOff == true) printk("chester bHWRadioOff\n");
+if (pDevice->bRadioControlOff == true) printk("chester bRadioControlOff\n");
+        return false;}
 
-    if (pDevice->bRadioOff == FALSE)
+    if (pDevice->bRadioOff == false)
        {
 printk("chester pbRadioOff\n");
-return TRUE;}
+return true;}
 
     BBvExitDeepSleep(pDevice->PortOffset, pDevice->byLocalID);
 
@@ -1514,7 +1030,7 @@ return TRUE;}
 
     }
 
-    pDevice->bRadioOff = FALSE;
+    pDevice->bRadioOff = false;
 //  2007-0409-03,<Add> by chester
 printk("chester power on\n");
 MACvRegBitsOff(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET); //LED issue
@@ -1523,12 +1039,12 @@ MACvRegBitsOff(pDevice->PortOffset, MAC_REG_GPIOCTL0, LED_ACTSET); //LED issue
 
 
 
-BOOL CARDbRemoveKey (void *pDeviceHandler, PBYTE pbyBSSID)
+bool CARDbRemoveKey (void *pDeviceHandler, unsigned char *pbyBSSID)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
     KeybRemoveAllKey(&(pDevice->sKey), pbyBSSID, pDevice->PortOffset);
-    return (TRUE);
+    return (true);
 }
 
 
@@ -1548,17 +1064,17 @@ BOOL CARDbRemoveKey (void *pDeviceHandler, PBYTE pbyBSSID)
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 CARDbAdd_PMKID_Candidate (
     void *pDeviceHandler,
-    PBYTE            pbyBSSID,
-    BOOL             bRSNCapExist,
-    WORD             wRSNCap
+    unsigned char *pbyBSSID,
+    bool bRSNCapExist,
+    unsigned short wRSNCap
     )
 {
     PSDevice            pDevice = (PSDevice) pDeviceHandler;
     PPMKID_CANDIDATE    pCandidateList;
-    UINT                ii = 0;
+    unsigned int ii = 0;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate START: (%d)\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
 
@@ -1577,18 +1093,18 @@ CARDbAdd_PMKID_Candidate (
     for (ii = 0; ii < pDevice->gsPMKIDCandidate.NumCandidates; ii++) {
         pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[ii];
         if ( !memcmp(pCandidateList->BSSID, pbyBSSID, ETH_ALEN)) {
-            if ((bRSNCapExist == TRUE) && (wRSNCap & BIT0)) {
+            if ((bRSNCapExist == true) && (wRSNCap & BIT0)) {
                 pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
             } else {
                 pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
             }
-            return TRUE;
+            return true;
         }
     }
 
     // New Candidate
     pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[pDevice->gsPMKIDCandidate.NumCandidates];
-    if ((bRSNCapExist == TRUE) && (wRSNCap & BIT0)) {
+    if ((bRSNCapExist == true) && (wRSNCap & BIT0)) {
         pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
     } else {
         pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
@@ -1596,7 +1112,7 @@ CARDbAdd_PMKID_Candidate (
     memcpy(pCandidateList->BSSID, pbyBSSID, ETH_ALEN);
     pDevice->gsPMKIDCandidate.NumCandidates++;
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"NumCandidates:%d\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
-    return TRUE;
+    return true;
 }
 
 void *
@@ -1609,89 +1125,6 @@ CARDpGetCurrentAddress (
     return (pDevice->abyCurrentNetAddr);
 }
 
-
-
-void CARDvInitChannelTable (void *pDeviceHandler)
-{
-    PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BOOL        bMultiBand = FALSE;
-    UINT        ii;
-
-    for(ii=1;ii<=CARD_MAX_CHANNEL_TBL;ii++) {
-        sChannelTbl[ii].bValid = FALSE;
-    }
-
-    switch (pDevice->byRFType) {
-        case RF_RFMD2959 :
-        case RF_AIROHA :
-        case RF_AL2230S:
-        case RF_UW2451 :
-        case RF_VT3226 :
-	//		printk("chester-false\n");
-            bMultiBand = FALSE;
-            break;
-        case RF_AIROHA7230 :
-        case RF_UW2452 :
-        case RF_NOTHING :
-        default :
-            bMultiBand = TRUE;
-            break;
-    }
-
-    if ((pDevice->dwDiagRefCount != 0) ||
-        (pDevice->b11hEnable == TRUE)) {
-        if (bMultiBand == TRUE) {
-            for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
-                sChannelTbl[ii+1].bValid = TRUE;
-                pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
-                pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
-            }
-            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
-                pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
-                pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
-            }
-        } else {
-            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
-//2008-8-4 <add> by chester
- if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-                sChannelTbl[ii+1].bValid = TRUE;
-                pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
-                pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
- 	}
-            }
-        }
-    } else if (pDevice->byZoneType <= CCODE_MAX) {
-        if (bMultiBand == TRUE) {
-            for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
-                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-                    sChannelTbl[ii+1].bValid = TRUE;
-                    pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                    pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                }
-            }
-        } else {
-            for(ii=0;ii<CHANNEL_MAX_24G;ii++) {
-                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-                    sChannelTbl[ii+1].bValid = TRUE;
-                    pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                    pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                }
-            }
-        }
-    }
- DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO"Zone=[%d][%c][%c]!!\n",pDevice->byZoneType,ChannelRuleTab[pDevice->byZoneType].chCountryCode[0],ChannelRuleTab[pDevice->byZoneType].chCountryCode[1]);
-    for(ii=0;ii<CARD_MAX_CHANNEL_TBL;ii++) {
-        if (pDevice->abyRegPwr[ii+1] == 0) {
-            pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
-        }
-        if (pDevice->abyLocalPwr[ii+1] == 0) {
-            pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
-        }
-    }
-}
-
-
-
 /*
  *
  * Description:
@@ -1706,27 +1139,27 @@ void CARDvInitChannelTable (void *pDeviceHandler)
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 CARDbStartMeasure (
     void *pDeviceHandler,
     void *pvMeasureEIDs,
-    UINT             uNumOfMeasureEIDs
+    unsigned int uNumOfMeasureEIDs
     )
 {
     PSDevice                pDevice = (PSDevice) pDeviceHandler;
     PWLAN_IE_MEASURE_REQ    pEID = (PWLAN_IE_MEASURE_REQ) pvMeasureEIDs;
     QWORD                   qwCurrTSF;
     QWORD                   qwStartTSF;
-    BOOL                    bExpired = TRUE;
-    WORD                    wDuration = 0;
+    bool bExpired = true;
+    unsigned short wDuration = 0;
 
     if ((pEID == NULL) ||
         (uNumOfMeasureEIDs == 0)) {
-        return (TRUE);
+        return (true);
     }
     CARDbGetCurrentTSF(pDevice->PortOffset, &qwCurrTSF);
-    if (pDevice->bMeasureInProgress == TRUE) {
-        pDevice->bMeasureInProgress = FALSE;
+    if (pDevice->bMeasureInProgress == true) {
+        pDevice->bMeasureInProgress = false;
         VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, pDevice->byOrgRCR);
         MACvSelectPage1(pDevice->PortOffset);
         VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, pDevice->dwOrgMAR0);
@@ -1734,7 +1167,7 @@ CARDbStartMeasure (
         // clear measure control
         MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
         MACvSelectPage0(pDevice->PortOffset);
-        CARDbSetChannel(pDevice, pDevice->byOrgChannel);
+        set_channel(pDevice, pDevice->byOrgChannel);
         MACvSelectPage1(pDevice->PortOffset);
         MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
         MACvSelectPage0(pDevice->PortOffset);
@@ -1749,7 +1182,7 @@ CARDbStartMeasure (
         if (pDevice->byLocalID > REV_ID_VT3253_B1) {
             HIDWORD(qwStartTSF) = HIDWORD(*((PQWORD) (pDevice->pCurrMeasureEID->sReq.abyStartTime)));
             LODWORD(qwStartTSF) = LODWORD(*((PQWORD) (pDevice->pCurrMeasureEID->sReq.abyStartTime)));
-            wDuration = *((PWORD) (pDevice->pCurrMeasureEID->sReq.abyDuration));
+            wDuration = *((unsigned short *) (pDevice->pCurrMeasureEID->sReq.abyDuration));
             wDuration += 1; // 1 TU for channel switching
 
             if ((LODWORD(qwStartTSF) == 0) && (HIDWORD(qwStartTSF) == 0)) {
@@ -1759,7 +1192,7 @@ CARDbStartMeasure (
                 if (LODWORD(qwCurrTSF) > LODWORD(qwStartTSF)) {
                     HIDWORD(qwStartTSF)++;
                 }
-                bExpired = FALSE;
+                bExpired = false;
                 break;
             } else {
                 // start at setting start TSF - 1TU(for channel switching)
@@ -1773,11 +1206,11 @@ CARDbStartMeasure (
                 ((HIDWORD(qwCurrTSF) == HIDWORD(qwStartTSF)) &&
                 (LODWORD(qwCurrTSF) < LODWORD(qwStartTSF)))
                 ) {
-                bExpired = FALSE;
+                bExpired = false;
                 break;
             }
             VNTWIFIbMeasureReport(  pDevice->pMgmt,
-                                    FALSE,
+                                    false,
                                     pDevice->pCurrMeasureEID,
                                     MEASURE_MODE_LATE,
                                     pDevice->byBasicMap,
@@ -1787,7 +1220,7 @@ CARDbStartMeasure (
         } else {
             // hardware do not support measure
             VNTWIFIbMeasureReport(  pDevice->pMgmt,
-                                    FALSE,
+                                    false,
                                     pDevice->pCurrMeasureEID,
                                     MEASURE_MODE_INCAPABLE,
                                     pDevice->byBasicMap,
@@ -1797,7 +1230,7 @@ CARDbStartMeasure (
         }
     } while (pDevice->uNumOfMeasureEIDs != 0);
 
-    if (bExpired == FALSE) {
+    if (bExpired == false) {
         MACvSelectPage1(pDevice->PortOffset);
         VNSvOutPortD(pDevice->PortOffset + MAC_REG_MSRSTART, LODWORD(qwStartTSF));
         VNSvOutPortD(pDevice->PortOffset + MAC_REG_MSRSTART + 4, HIDWORD(qwStartTSF));
@@ -1807,7 +1240,7 @@ CARDbStartMeasure (
     } else {
         // all measure start time expired we should complete action
         VNTWIFIbMeasureReport(  pDevice->pMgmt,
-                                TRUE,
+                                true,
                                 NULL,
                                 0,
                                 pDevice->byBasicMap,
@@ -1815,7 +1248,7 @@ CARDbStartMeasure (
                                 pDevice->abyRPIs
                                 );
     }
-    return (TRUE);
+    return (true);
 }
 
 
@@ -1833,19 +1266,19 @@ CARDbStartMeasure (
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 CARDbChannelSwitch (
     void *pDeviceHandler,
-    BYTE             byMode,
-    BYTE             byNewChannel,
-    BYTE             byCount
+    unsigned char byMode,
+    unsigned char byNewChannel,
+    unsigned char byCount
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BOOL        bResult = TRUE;
+    bool bResult = true;
 
     if (byCount == 0) {
-        bResult = CARDbSetChannel(pDevice, byNewChannel);
+        bResult = set_channel(pDevice, byNewChannel);
         VNTWIFIbChannelSwitch(pDevice->pMgmt, byNewChannel);
         MACvSelectPage1(pDevice->PortOffset);
         MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
@@ -1854,7 +1287,7 @@ CARDbChannelSwitch (
     }
     pDevice->byChannelSwitchCount = byCount;
     pDevice->byNewChannel = byNewChannel;
-    pDevice->bChannelSwitch = TRUE;
+    pDevice->bChannelSwitch = true;
     if (byMode == 1) {
         bResult=CARDbStopTxPacket(pDevice, PKT_TYPE_802_11_ALL);
     }
@@ -1876,34 +1309,34 @@ CARDbChannelSwitch (
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 CARDbSetQuiet (
     void *pDeviceHandler,
-    BOOL             bResetQuiet,
-    BYTE             byQuietCount,
-    BYTE             byQuietPeriod,
-    WORD             wQuietDuration,
-    WORD             wQuietOffset
+    bool bResetQuiet,
+    unsigned char byQuietCount,
+    unsigned char byQuietPeriod,
+    unsigned short wQuietDuration,
+    unsigned short wQuietOffset
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        ii = 0;
+    unsigned int ii = 0;
 
-    if (bResetQuiet == TRUE) {
+    if (bResetQuiet == true) {
         MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
         for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
-            pDevice->sQuiet[ii].bEnable = FALSE;
+            pDevice->sQuiet[ii].bEnable = false;
         }
         pDevice->uQuietEnqueue = 0;
-        pDevice->bEnableFirstQuiet = FALSE;
-        pDevice->bQuietEnable = FALSE;
+        pDevice->bEnableFirstQuiet = false;
+        pDevice->bQuietEnable = false;
         pDevice->byQuietStartCount = byQuietCount;
     }
-    if (pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable == FALSE) {
-        pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable = TRUE;
+    if (pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable == false) {
+        pDevice->sQuiet[pDevice->uQuietEnqueue].bEnable = true;
         pDevice->sQuiet[pDevice->uQuietEnqueue].byPeriod = byQuietPeriod;
         pDevice->sQuiet[pDevice->uQuietEnqueue].wDuration = wQuietDuration;
-        pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime = (DWORD) byQuietCount;
+        pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime = (unsigned long) byQuietCount;
         pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime *= pDevice->wBeaconInterval;
         pDevice->sQuiet[pDevice->uQuietEnqueue].dwStartTime += wQuietOffset;
         pDevice->uQuietEnqueue++;
@@ -1914,7 +1347,7 @@ CARDbSetQuiet (
     } else {
         // we can not handle Quiet EID more
     }
-    return (TRUE);
+    return (true);
 }
 
 
@@ -1932,21 +1365,21 @@ CARDbSetQuiet (
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 CARDbStartQuiet (
     void *pDeviceHandler
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        ii = 0;
-    DWORD       dwStartTime = 0xFFFFFFFF;
-    UINT        uCurrentQuietIndex = 0;
-    DWORD       dwNextTime = 0;
-    DWORD       dwGap = 0;
-    DWORD       dwDuration = 0;
+    unsigned int ii = 0;
+    unsigned long dwStartTime = 0xFFFFFFFF;
+    unsigned int uCurrentQuietIndex = 0;
+    unsigned long dwNextTime = 0;
+    unsigned long dwGap = 0;
+    unsigned long dwDuration = 0;
 
     for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
-        if ((pDevice->sQuiet[ii].bEnable == TRUE) &&
+        if ((pDevice->sQuiet[ii].bEnable == true) &&
             (dwStartTime > pDevice->sQuiet[ii].dwStartTime)) {
             dwStartTime = pDevice->sQuiet[ii].dwStartTime;
             uCurrentQuietIndex = ii;
@@ -1954,22 +1387,22 @@ CARDbStartQuiet (
     }
     if (dwStartTime == 0xFFFFFFFF) {
         // no more quiet
-        pDevice->bQuietEnable = FALSE;
+        pDevice->bQuietEnable = false;
         MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
     } else {
-        if (pDevice->bQuietEnable == FALSE) {
+        if (pDevice->bQuietEnable == false) {
             // first quiet
             pDevice->byQuietStartCount--;
             dwNextTime = pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
             dwNextTime %= pDevice->wBeaconInterval;
             MACvSelectPage1(pDevice->PortOffset);
-            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETINIT, (WORD) dwNextTime);
-            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (WORD) pDevice->sQuiet[uCurrentQuietIndex].wDuration);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETINIT, (unsigned short) dwNextTime);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (unsigned short) pDevice->sQuiet[uCurrentQuietIndex].wDuration);
             if (pDevice->byQuietStartCount == 0) {
-                pDevice->bEnableFirstQuiet = FALSE;
+                pDevice->bEnableFirstQuiet = false;
                 MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
             } else {
-                pDevice->bEnableFirstQuiet = TRUE;
+                pDevice->bEnableFirstQuiet = true;
             }
             MACvSelectPage0(pDevice->PortOffset);
         } else {
@@ -1977,8 +1410,8 @@ CARDbStartQuiet (
                 // overlap with previous Quiet
                 dwGap =  pDevice->dwCurrentQuietEndTime - pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
                 if (dwGap >= pDevice->sQuiet[uCurrentQuietIndex].wDuration) {
-                    // return FALSE to indicate next quiet expired, should call this function again
-                    return (FALSE);
+                    // return false to indicate next quiet expired, should call this function again
+                    return (false);
                 }
                 dwDuration = pDevice->sQuiet[uCurrentQuietIndex].wDuration - dwGap;
                 dwGap = 0;
@@ -1988,94 +1421,34 @@ CARDbStartQuiet (
             }
             // set GAP and Next duration
             MACvSelectPage1(pDevice->PortOffset);
-            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETGAP, (WORD) dwGap);
-            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (WORD) dwDuration);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETGAP, (unsigned short) dwGap);
+            VNSvOutPortW(pDevice->PortOffset + MAC_REG_QUIETDUR, (unsigned short) dwDuration);
             MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_QUIETRPT);
             MACvSelectPage0(pDevice->PortOffset);
         }
-        pDevice->bQuietEnable = TRUE;
+        pDevice->bQuietEnable = true;
         pDevice->dwCurrentQuietEndTime = pDevice->sQuiet[uCurrentQuietIndex].dwStartTime;
         pDevice->dwCurrentQuietEndTime += pDevice->sQuiet[uCurrentQuietIndex].wDuration;
         if (pDevice->sQuiet[uCurrentQuietIndex].byPeriod == 0) {
             // not period disable current quiet element
-            pDevice->sQuiet[uCurrentQuietIndex].bEnable = FALSE;
+            pDevice->sQuiet[uCurrentQuietIndex].bEnable = false;
         } else {
             // set next period start time
-            dwNextTime = (DWORD) pDevice->sQuiet[uCurrentQuietIndex].byPeriod;
+            dwNextTime = (unsigned long) pDevice->sQuiet[uCurrentQuietIndex].byPeriod;
             dwNextTime *= pDevice->wBeaconInterval;
             pDevice->sQuiet[uCurrentQuietIndex].dwStartTime = dwNextTime;
         }
         if (pDevice->dwCurrentQuietEndTime > 0x80010000) {
             // decreament all time to avoid wrap around
             for(ii=0;ii<MAX_QUIET_COUNT;ii++) {
-                if (pDevice->sQuiet[ii].bEnable == TRUE) {
+                if (pDevice->sQuiet[ii].bEnable == true) {
                     pDevice->sQuiet[ii].dwStartTime -= 0x80000000;
                 }
             }
             pDevice->dwCurrentQuietEndTime -= 0x80000000;
         }
     }
-    return (TRUE);
-}
-
-
-/*
- *
- * Description:
- *    Set Channel Info of Country
- *
- * Parameters:
- *  In:
- *      hDeviceContext - device structure point
- *  Out:
- *      none
- *
- * Return Value: none.
- *
--*/
-void
-CARDvSetCountryInfo (
-    void *pDeviceHandler,
-    CARD_PHY_TYPE    ePHYType,
-    void *pIE
-    )
-{
-    PSDevice            pDevice = (PSDevice) pDeviceHandler;
-    UINT                ii = 0;
-    UINT                uu = 0;
-    UINT                step = 0;
-    UINT                uNumOfCountryInfo = 0;
-    BYTE                byCh = 0;
-    PWLAN_IE_COUNTRY    pIE_Country = (PWLAN_IE_COUNTRY) pIE;
-
-
-    uNumOfCountryInfo = (pIE_Country->len - 3);
-    uNumOfCountryInfo /= 3;
-
-    if (ePHYType == PHY_TYPE_11A) {
-        pDevice->bCountryInfo5G = TRUE;
-        for(ii=CB_MAX_CHANNEL_24G+1;ii<=CARD_MAX_CHANNEL_TBL;ii++) {
-            sChannelTbl[ii].bValid = FALSE;
-        }
-        step = 4;
-    } else {
-        pDevice->bCountryInfo24G = TRUE;
-        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
-            sChannelTbl[ii].bValid = FALSE;
-        }
-        step = 1;
-    }
-    pDevice->abyCountryCode[0] = pIE_Country->abyCountryString[0];
-    pDevice->abyCountryCode[1] = pIE_Country->abyCountryString[1];
-    pDevice->abyCountryCode[2] = pIE_Country->abyCountryString[2];
-
-    for(ii=0;ii<uNumOfCountryInfo;ii++) {
-        for(uu=0;uu<pIE_Country->abyCountryInfo[ii*3+1];uu++) {
-            byCh = CARDbyGetChannelMapping(pDevice, (BYTE)(pIE_Country->abyCountryInfo[ii*3]+step*uu), ePHYType);
-            sChannelTbl[byCh].bValid = TRUE;
-            pDevice->abyRegPwr[byCh] = pIE_Country->abyCountryInfo[ii*3+2];
-        }
-    }
+    return (true);
 }
 
 /*
@@ -2095,18 +1468,18 @@ CARDvSetCountryInfo (
 void
 CARDvSetPowerConstraint (
     void *pDeviceHandler,
-    BYTE             byChannel,
-    I8               byPower
+    unsigned char byChannel,
+    char byPower
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
 
     if (byChannel > CB_MAX_CHANNEL_24G) {
-        if (pDevice->bCountryInfo5G == TRUE) {
+        if (pDevice->bCountryInfo5G == true) {
             pDevice->abyLocalPwr[byChannel] = pDevice->abyRegPwr[byChannel] - byPower;
         }
     } else {
-        if (pDevice->bCountryInfo24G == TRUE) {
+        if (pDevice->bCountryInfo24G == true) {
             pDevice->abyLocalPwr[byChannel] = pDevice->abyRegPwr[byChannel] - byPower;
         }
     }
@@ -2130,12 +1503,12 @@ CARDvSetPowerConstraint (
 void
 CARDvGetPowerCapability (
     void *pDeviceHandler,
-    PBYTE           pbyMinPower,
-    PBYTE           pbyMaxPower
+    unsigned char *pbyMinPower,
+    unsigned char *pbyMaxPower
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    BYTE        byDec = 0;
+    unsigned char byDec = 0;
 
     *pbyMaxPower = pDevice->abyOFDMDefaultPwr[pDevice->byCurrentCh];
     byDec = pDevice->abyOFDMPwrTbl[pDevice->byCurrentCh];
@@ -2148,98 +1521,6 @@ CARDvGetPowerCapability (
     *pbyMinPower = pDevice->abyOFDMDefaultPwr[pDevice->byCurrentCh] - byDec;
 }
 
-
-/*
- *
- * Description:
- *    Set Support Channels IE defined in 802.11h
- *
- * Parameters:
- *  In:
- *      hDeviceContext - device structure point
- *  Out:
- *      none
- *
- * Return Value: none.
- *
--*/
-BYTE
-CARDbySetSupportChannels (
-    void *pDeviceHandler,
-    PBYTE        pbyIEs
-    )
-{
-    PSDevice            pDevice = (PSDevice) pDeviceHandler;
-    UINT                ii;
-    BYTE                byCount;
-    PWLAN_IE_SUPP_CH    pIE = (PWLAN_IE_SUPP_CH) pbyIEs;
-    PBYTE               pbyChTupple;
-    BYTE                byLen = 0;
-
-
-    pIE->byElementID = WLAN_EID_SUPP_CH;
-    pIE->len = 0;
-    pbyChTupple = pIE->abyChannelTuple;
-    byLen = 2;
-    // lower band
-    byCount = 0;
-    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[28] == TRUE) {
-        for (ii=28;ii<36;ii+=2) {
-            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
-                byCount++;
-            }
-        }
-        *pbyChTupple++ = 34;
-        *pbyChTupple++ = byCount;
-        byLen += 2;
-    } else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[29] == TRUE) {
-        for (ii=29;ii<36;ii+=2) {
-            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
-                byCount++;
-            }
-        }
-        *pbyChTupple++ = 36;
-        *pbyChTupple++ = byCount;
-        byLen += 2;
-    }
-    // middle band
-    byCount = 0;
-    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[36] == TRUE) {
-        for (ii=36;ii<40;ii++) {
-            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
-                byCount++;
-            }
-        }
-        *pbyChTupple++ = 52;
-        *pbyChTupple++ = byCount;
-        byLen += 2;
-    }
-    // higher band
-    byCount = 0;
-    if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[40] == TRUE) {
-        for (ii=40;ii<51;ii++) {
-            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
-                byCount++;
-            }
-        }
-        *pbyChTupple++ = 100;
-        *pbyChTupple++ = byCount;
-        byLen += 2;
-    } else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[51] == TRUE) {
-        for (ii=51;ii<56;ii++) {
-            if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == TRUE) {
-                byCount++;
-            }
-        }
-        *pbyChTupple++ = 149;
-        *pbyChTupple++ = byCount;
-        byLen += 2;
-    }
-    pIE->len += (byLen - 2);
-    return (byLen);
-}
-
-
 /*
  *
  * Description:
@@ -2253,8 +1534,8 @@ CARDbySetSupportChannels (
  *
  * Return Value: none.
  *
--*/
-I8
+ */
+char
 CARDbyGetTransmitPower (
     void *pDeviceHandler
     )
@@ -2264,161 +1545,6 @@ CARDbyGetTransmitPower (
     return (pDevice->byCurPwrdBm);
 }
 
-
-BOOL
-CARDbChannelGetList (
-     UINT       uCountryCodeIdx,
-    PBYTE      pbyChannelTable
-    )
-{
-    if (uCountryCodeIdx >= CCODE_MAX) {
-        return (FALSE);
-    }
-    memcpy(pbyChannelTable, ChannelRuleTab[uCountryCodeIdx].bChannelIdxList, CB_MAX_CHANNEL);
-    return (TRUE);
-}
-
-
-void
-CARDvSetCountryIE(
-    void *pDeviceHandler,
-    void *pIE
-    )
-{
-    PSDevice            pDevice = (PSDevice) pDeviceHandler;
-    UINT                ii;
-    PWLAN_IE_COUNTRY    pIECountry = (PWLAN_IE_COUNTRY) pIE;
-
-    pIECountry->byElementID = WLAN_EID_COUNTRY;
-    pIECountry->len = 0;
-    pIECountry->abyCountryString[0] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[0];
-    pIECountry->abyCountryString[1] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[1];
-    pIECountry->abyCountryString[2] = ' ';
-    for (ii = CB_MAX_CHANNEL_24G; ii < CB_MAX_CHANNEL; ii++ ) {
-        if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-            pIECountry->abyCountryInfo[pIECountry->len++] = sChannelTbl[ii+1].byChannelNumber;
-            pIECountry->abyCountryInfo[pIECountry->len++] = 1;
-            pIECountry->abyCountryInfo[pIECountry->len++] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-        }
-    }
-    pIECountry->len += 3;
-}
-
-
-BOOL
-CARDbGetChannelMapInfo(
-    void *pDeviceHandler,
-    UINT         uChannelIndex,
-    PBYTE       pbyChannelNumber,
-    PBYTE       pbyMap
-    )
-{
-//    PSDevice            pDevice = (PSDevice) pDeviceHandler;
-
-    if (uChannelIndex > CB_MAX_CHANNEL) {
-        return FALSE;
-    }
-    *pbyChannelNumber = sChannelTbl[uChannelIndex].byChannelNumber;
-    *pbyMap = sChannelTbl[uChannelIndex].byMAP;
-    return sChannelTbl[uChannelIndex].bValid;
-}
-
-
-void
-CARDvSetChannelMapInfo(
-    void *pDeviceHandler,
-    UINT         uChannelIndex,
-    BYTE         byMap
-    )
-{
-//    PSDevice            pDevice = (PSDevice) pDeviceHandler;
-
-    if (uChannelIndex > CB_MAX_CHANNEL) {
-        return;
-    }
-    sChannelTbl[uChannelIndex].byMAP |= byMap;
-}
-
-
-void
-CARDvClearChannelMapInfo(
-    void *pDeviceHandler
-    )
-{
-//    PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        ii = 0;
-
-    for (ii = 1; ii <=  CB_MAX_CHANNEL; ii++) {
-        sChannelTbl[ii].byMAP = 0;
-    }
-}
-
-
-BYTE
-CARDbyAutoChannelSelect(
-    void *pDeviceHandler,
-    CARD_PHY_TYPE   ePHYType
-    )
-{
-//    PSDevice        pDevice = (PSDevice) pDeviceHandler;
-    UINT            ii = 0;
-    BYTE            byOptionChannel = 0;
-    INT             aiWeight[CB_MAX_CHANNEL_24G+1] = {-1000,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-
-    if (ePHYType == PHY_TYPE_11A) {
-        for(ii=CB_MAX_CHANNEL_24G+1;ii<=CB_MAX_CHANNEL;ii++) {
-            if (sChannelTbl[ii].bValid == TRUE) {
-                if (byOptionChannel == 0) {
-                    byOptionChannel = (BYTE) ii;
-                }
-                if (sChannelTbl[ii].byMAP == 0) {
-                    return ((BYTE) ii);
-                } else if ( !(sChannelTbl[ii].byMAP & 0x08)) {
-                    byOptionChannel = (BYTE) ii;
-                }
-            }
-        }
-    } else {
-        byOptionChannel = 0;
-        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
-            if (sChannelTbl[ii].bValid == TRUE) {
-                if (sChannelTbl[ii].byMAP == 0) {
-                    aiWeight[ii] += 100;
-                } else if (sChannelTbl[ii].byMAP & 0x01) {
-                    if (ii > 3) {
-                        aiWeight[ii-3] -= 10;
-                    }
-                    if (ii > 2) {
-                        aiWeight[ii-2] -= 20;
-                    }
-                    if (ii > 1) {
-                        aiWeight[ii-1] -= 40;
-                    }
-                    aiWeight[ii] -= 80;
-                    if (ii < CB_MAX_CHANNEL_24G) {
-                        aiWeight[ii+1] -= 40;
-                    }
-                    if (ii < (CB_MAX_CHANNEL_24G - 1)) {
-                        aiWeight[ii+2] -= 20;
-                    }
-                    if (ii < (CB_MAX_CHANNEL_24G - 2)) {
-                        aiWeight[ii+3] -= 10;
-                    }
-                }
-            }
-        }
-        for(ii=1;ii<=CB_MAX_CHANNEL_24G;ii++) {
-            if ((sChannelTbl[ii].bValid == TRUE) &&
-                (aiWeight[ii] > aiWeight[byOptionChannel])) {
-                byOptionChannel = (BYTE) ii;
-            }
-        }
-    }
-    return (byOptionChannel);
-}
-
-
-
 //xxx
 void
 CARDvSafeResetTx (
@@ -2426,7 +1552,7 @@ CARDvSafeResetTx (
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        uu;
+    unsigned int uu;
     PSTxDesc    pCurrTD;
 
     // initialize TD index
@@ -2482,7 +1608,7 @@ CARDvSafeResetRx (
     )
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT        uu;
+    unsigned int uu;
     PSRxDesc    pDesc;
 
 
@@ -2494,17 +1620,17 @@ CARDvSafeResetRx (
     // init state, all RD is chip's
     for (uu = 0; uu < pDevice->sOpts.nRxDescs0; uu++) {
         pDesc =&(pDevice->aRD0Ring[uu]);
-        pDesc->m_rd0RD0.wResCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd0RD0.wResCount = (unsigned short)(pDevice->rx_buf_sz);
         pDesc->m_rd0RD0.f1Owner=OWNED_BY_NIC;
-        pDesc->m_rd1RD1.wReqCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd1RD1.wReqCount = (unsigned short)(pDevice->rx_buf_sz);
     }
 
     // init state, all RD is chip's
     for (uu = 0; uu < pDevice->sOpts.nRxDescs1; uu++) {
         pDesc =&(pDevice->aRD1Ring[uu]);
-        pDesc->m_rd0RD0.wResCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd0RD0.wResCount = (unsigned short)(pDevice->rx_buf_sz);
         pDesc->m_rd0RD0.f1Owner=OWNED_BY_NIC;
-        pDesc->m_rd1RD1.wReqCount = (WORD)(pDevice->rx_buf_sz);
+        pDesc->m_rd1RD1.wReqCount = (unsigned short)(pDevice->rx_buf_sz);
     }
 
     pDevice->cbDFCB = CB_MAX_RX_FRAG;
@@ -2537,18 +1663,18 @@ CARDvSafeResetRx (
  * Return Value: response Control frame rate
  *
  */
-WORD CARDwGetCCKControlRate(void *pDeviceHandler, WORD wRateIdx)
+unsigned short CARDwGetCCKControlRate(void *pDeviceHandler, unsigned short wRateIdx)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
-    UINT ui = (UINT)wRateIdx;
+    unsigned int ui = (unsigned int) wRateIdx;
 
     while (ui > RATE_1M) {
-        if (pDevice->wBasicRate & ((WORD)1 << ui)) {
-            return (WORD)ui;
+        if (pDevice->wBasicRate & ((unsigned short)1 << ui)) {
+            return (unsigned short)ui;
         }
         ui --;
     }
-    return (WORD)RATE_1M;
+    return (unsigned short)RATE_1M;
 }
 
 /*
@@ -2564,10 +1690,10 @@ WORD CARDwGetCCKControlRate(void *pDeviceHandler, WORD wRateIdx)
  * Return Value: response Control frame rate
  *
  */
-WORD CARDwGetOFDMControlRate (void *pDeviceHandler, WORD wRateIdx)
+unsigned short CARDwGetOFDMControlRate (void *pDeviceHandler, unsigned short wRateIdx)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
-    UINT ui = (UINT)wRateIdx;
+    unsigned int ui = (unsigned int) wRateIdx;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BASIC RATE: %X\n", pDevice->wBasicRate);
 
@@ -2578,14 +1704,14 @@ WORD CARDwGetOFDMControlRate (void *pDeviceHandler, WORD wRateIdx)
         return wRateIdx;
     }
     while (ui > RATE_11M) {
-        if (pDevice->wBasicRate & ((WORD)1 << ui)) {
+        if (pDevice->wBasicRate & ((unsigned short)1 << ui)) {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDwGetOFDMControlRate : %d\n", ui);
-            return (WORD)ui;
+            return (unsigned short)ui;
         }
         ui --;
     }
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDwGetOFDMControlRate: 6M\n");
-    return (WORD)RATE_24M;
+    return (unsigned short)RATE_24M;
 }
 
 
@@ -2604,9 +1730,9 @@ WORD CARDwGetOFDMControlRate (void *pDeviceHandler, WORD wRateIdx)
 void CARDvSetRSPINF (void *pDeviceHandler, CARD_PHY_TYPE ePHYType)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
-    BYTE  byServ = 0x00, bySignal = 0x00; //For CCK
-    WORD  wLen = 0x0000;
-    BYTE  byTxRate, byRsvTime;             //For OFDM
+    unsigned char byServ = 0x00, bySignal = 0x00; //For CCK
+    unsigned short wLen = 0x0000;
+    unsigned char byTxRate, byRsvTime;             //For OFDM
 
     //Set to Page1
     MACvSelectPage1(pDevice->PortOffset);
@@ -2731,7 +1857,7 @@ void vUpdateIFS (void *pDeviceHandler)
     //Set SIFS, DIFS, EIFS, SlotTime, CwMin
     PSDevice pDevice = (PSDevice) pDeviceHandler;
 
-    BYTE byMaxMin = 0;
+    unsigned char byMaxMin = 0;
     if (pDevice->byPacketType==PK_TYPE_11A) {//0000 0000 0000 0000,11a
         pDevice->uSlot = C_SLOT_SHORT;
         pDevice->uSIFS = C_SIFS_A;
@@ -2768,27 +1894,27 @@ void vUpdateIFS (void *pDeviceHandler)
     pDevice->uEIFS = C_EIFS;
     if (pDevice->byRFType == RF_RFMD2959) {
         // bcs TX_PE will reserve 3 us
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (BYTE)(pDevice->uSIFS - 3));
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (BYTE)(pDevice->uDIFS - 3));
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (unsigned char)(pDevice->uSIFS - 3));
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (unsigned char)(pDevice->uDIFS - 3));
     } else {
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (BYTE)pDevice->uSIFS);
-        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (BYTE)pDevice->uDIFS);
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_SIFS, (unsigned char)pDevice->uSIFS);
+        VNSvOutPortB(pDevice->PortOffset + MAC_REG_DIFS, (unsigned char)pDevice->uDIFS);
     }
-    VNSvOutPortB(pDevice->PortOffset + MAC_REG_EIFS, (BYTE)pDevice->uEIFS);
-    VNSvOutPortB(pDevice->PortOffset + MAC_REG_SLOT, (BYTE)pDevice->uSlot);
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_EIFS, (unsigned char)pDevice->uEIFS);
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_SLOT, (unsigned char)pDevice->uSlot);
     byMaxMin |= 0xA0;//1010 1111,C_CWMAX = 1023
-    VNSvOutPortB(pDevice->PortOffset + MAC_REG_CWMAXMIN0, (BYTE)byMaxMin);
+    VNSvOutPortB(pDevice->PortOffset + MAC_REG_CWMAXMIN0, (unsigned char)byMaxMin);
 }
 
 void CARDvUpdateBasicTopRate (void *pDeviceHandler)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
-    BYTE byTopOFDM = RATE_24M, byTopCCK = RATE_1M;
-    BYTE ii;
+    unsigned char byTopOFDM = RATE_24M, byTopCCK = RATE_1M;
+    unsigned char ii;
 
      //Determines the highest basic rate.
      for (ii = RATE_54M; ii >= RATE_6M; ii --) {
-         if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) ) {
+         if ( (pDevice->wBasicRate) & ((unsigned short)(1<<ii)) ) {
              byTopOFDM = ii;
              break;
          }
@@ -2796,7 +1922,7 @@ void CARDvUpdateBasicTopRate (void *pDeviceHandler)
      pDevice->byTopOFDMBasicRate = byTopOFDM;
 
      for (ii = RATE_11M;; ii --) {
-         if ( (pDevice->wBasicRate) & ((WORD)(1<<ii)) ) {
+         if ( (pDevice->wBasicRate) & ((unsigned short)(1<<ii)) ) {
              byTopCCK = ii;
              break;
          }
@@ -2817,40 +1943,40 @@ void CARDvUpdateBasicTopRate (void *pDeviceHandler)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL CARDbAddBasicRate (void *pDeviceHandler, WORD wRateIdx)
+bool CARDbAddBasicRate (void *pDeviceHandler, unsigned short wRateIdx)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
-    WORD wRate = (WORD)(1<<wRateIdx);
+    unsigned short wRate = (unsigned short)(1<<wRateIdx);
 
     pDevice->wBasicRate |= wRate;
 
     //Determines the highest basic rate.
     CARDvUpdateBasicTopRate((void *)pDevice);
 
-    return(TRUE);
+    return(true);
 }
 
-BOOL CARDbIsOFDMinBasicRate (void *pDeviceHandler)
+bool CARDbIsOFDMinBasicRate (void *pDeviceHandler)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
     int ii;
 
     for (ii = RATE_54M; ii >= RATE_6M; ii --) {
-        if ((pDevice->wBasicRate) & ((WORD)(1<<ii)))
-            return TRUE;
+        if ((pDevice->wBasicRate) & ((unsigned short)(1<<ii)))
+            return true;
     }
-    return FALSE;
+    return false;
 }
 
-BYTE CARDbyGetPktType (void *pDeviceHandler)
+unsigned char CARDbyGetPktType (void *pDeviceHandler)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
 
     if (pDevice->byBBType == BB_TYPE_11A || pDevice->byBBType == BB_TYPE_11B) {
-        return (BYTE)pDevice->byBBType;
+        return (unsigned char)pDevice->byBBType;
     }
     else if (CARDbIsOFDMinBasicRate((void *)pDevice)) {
         return PK_TYPE_11GA;
@@ -2873,7 +1999,7 @@ BYTE CARDbyGetPktType (void *pDeviceHandler)
  * Return Value: none
  *
  */
-void CARDvSetLoopbackMode (DWORD_PTR dwIoBase, WORD wLoopbackMode)
+void CARDvSetLoopbackMode (unsigned long dwIoBase, unsigned short wLoopbackMode)
 {
     switch(wLoopbackMode) {
     case CARD_LB_NONE:
@@ -2881,7 +2007,7 @@ void CARDvSetLoopbackMode (DWORD_PTR dwIoBase, WORD wLoopbackMode)
     case CARD_LB_PHY:
         break;
     default:
-        ASSERT(FALSE);
+        ASSERT(false);
         break;
     }
     // set MAC loopback
@@ -2902,15 +2028,15 @@ void CARDvSetLoopbackMode (DWORD_PTR dwIoBase, WORD wLoopbackMode)
  * Return Value: none
  *
  */
-BOOL CARDbSoftwareReset (void *pDeviceHandler)
+bool CARDbSoftwareReset (void *pDeviceHandler)
 {
     PSDevice pDevice = (PSDevice) pDeviceHandler;
 
     // reset MAC
     if (!MACbSafeSoftwareReset(pDevice->PortOffset))
-        return FALSE;
+        return false;
 
-    return TRUE;
+    return true;
 }
 
 
@@ -2929,16 +2055,16 @@ BOOL CARDbSoftwareReset (void *pDeviceHandler)
  * Return Value: TSF Offset value
  *
  */
-QWORD CARDqGetTSFOffset (BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2)
+QWORD CARDqGetTSFOffset (unsigned char byRxRate, QWORD qwTSF1, QWORD qwTSF2)
 {
     QWORD   qwTSFOffset;
-    WORD    wRxBcnTSFOffst= 0;;
+    unsigned short wRxBcnTSFOffst= 0;;
 
     HIDWORD(qwTSFOffset) = 0;
     LODWORD(qwTSFOffset) = 0;
     wRxBcnTSFOffst = cwRXBCNTSFOff[byRxRate%MAX_RATE];
-    (qwTSF2).u.dwLowDword += (DWORD)(wRxBcnTSFOffst);
-    if ((qwTSF2).u.dwLowDword < (DWORD)(wRxBcnTSFOffst)) {
+    (qwTSF2).u.dwLowDword += (unsigned long)(wRxBcnTSFOffst);
+    if ((qwTSF2).u.dwLowDword < (unsigned long)(wRxBcnTSFOffst)) {
         (qwTSF2).u.dwHighDword++;
     }
     LODWORD(qwTSFOffset) = LODWORD(qwTSF1) - LODWORD(qwTSF2);
@@ -2963,13 +2089,13 @@ QWORD CARDqGetTSFOffset (BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2)
  *  Out:
  *      qwCurrTSF       - Current TSF counter
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL CARDbGetCurrentTSF (DWORD_PTR dwIoBase, PQWORD pqwCurrTSF)
+bool CARDbGetCurrentTSF (unsigned long dwIoBase, PQWORD pqwCurrTSF)
 {
-    WORD    ww;
-    BYTE    byData;
+    unsigned short ww;
+    unsigned char byData;
 
     MACvRegBitsOn(dwIoBase, MAC_REG_TFTCTL, TFTCTL_TSFCNTRRD);
     for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
@@ -2978,11 +2104,11 @@ BOOL CARDbGetCurrentTSF (DWORD_PTR dwIoBase, PQWORD pqwCurrTSF)
             break;
     }
     if (ww == W_MAX_TIMEOUT)
-        return(FALSE);
+        return(false);
     VNSvInPortD(dwIoBase + MAC_REG_TSFCNTR, &LODWORD(*pqwCurrTSF));
     VNSvInPortD(dwIoBase + MAC_REG_TSFCNTR + 4, &HIDWORD(*pqwCurrTSF));
 
-    return(TRUE);
+    return(true);
 }
 
 
@@ -3000,12 +2126,12 @@ BOOL CARDbGetCurrentTSF (DWORD_PTR dwIoBase, PQWORD pqwCurrTSF)
  * Return Value: TSF value of next Beacon
  *
  */
-QWORD CARDqGetNextTBTT (QWORD qwTSF, WORD wBeaconInterval)
+QWORD CARDqGetNextTBTT (QWORD qwTSF, unsigned short wBeaconInterval)
 {
 
-    UINT    uLowNextTBTT;
-    UINT    uHighRemain, uLowRemain;
-    UINT    uBeaconInterval;
+    unsigned int uLowNextTBTT;
+    unsigned int uHighRemain, uLowRemain;
+    unsigned int uBeaconInterval;
 
     uBeaconInterval = wBeaconInterval * 1024;
     // Next TBTT = ((local_current_TSF / beacon_interval) + 1 ) * beacon_interval
@@ -3044,7 +2170,7 @@ QWORD CARDqGetNextTBTT (QWORD qwTSF, WORD wBeaconInterval)
  * Return Value: none
  *
  */
-void CARDvSetFirstNextTBTT (DWORD_PTR dwIoBase, WORD wBeaconInterval)
+void CARDvSetFirstNextTBTT (unsigned long dwIoBase, unsigned short wBeaconInterval)
 {
 
     QWORD   qwNextTBTT;
@@ -3077,7 +2203,7 @@ void CARDvSetFirstNextTBTT (DWORD_PTR dwIoBase, WORD wBeaconInterval)
  * Return Value: none
  *
  */
-void CARDvUpdateNextTBTT (DWORD_PTR dwIoBase, QWORD qwTSF, WORD wBeaconInterval)
+void CARDvUpdateNextTBTT (unsigned long dwIoBase, QWORD qwTSF, unsigned short wBeaconInterval)
 {
 
     qwTSF = CARDqGetNextTBTT(qwTSF, wBeaconInterval);
@@ -3085,7 +2211,8 @@ void CARDvUpdateNextTBTT (DWORD_PTR dwIoBase, QWORD qwTSF, WORD wBeaconInterval)
     VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT, LODWORD(qwTSF));
     VNSvOutPortD(dwIoBase + MAC_REG_NEXTTBTT + 4, HIDWORD(qwTSF));
     MACvRegBitsOn(dwIoBase, MAC_REG_TFTCTL, TFTCTL_TBTTSYNCEN);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Card:Update Next TBTT[%8xh:%8xh] \n",(UINT)HIDWORD(qwTSF), (UINT)LODWORD(qwTSF));
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Card:Update Next TBTT[%8xh:%8xh] \n",
+		    (unsigned int) HIDWORD(qwTSF), (unsigned int) LODWORD(qwTSF));
 
     return;
 }
diff --git a/drivers/staging/vt6655/card.h b/drivers/staging/vt6655/card.h
index 76313462cf7..e0836e1d511 100644
--- a/drivers/staging/vt6655/card.h
+++ b/drivers/staging/vt6655/card.h
@@ -30,6 +30,7 @@
 #define __CARD_H__
 
 #include "ttype.h"
+#include <linux/types.h>
 
 /*---------------------  Export Definitions -------------------------*/
 //
@@ -86,57 +87,55 @@ typedef enum _CARD_OP_MODE {
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL ChannelValid(UINT CountryCode, UINT ChannelIndex);
 void CARDvSetRSPINF(void *pDeviceHandler, CARD_PHY_TYPE ePHYType);
 void vUpdateIFS(void *pDeviceHandler);
 void CARDvUpdateBasicTopRate(void *pDeviceHandler);
-BOOL CARDbAddBasicRate(void *pDeviceHandler, WORD wRateIdx);
-BOOL CARDbIsOFDMinBasicRate(void *pDeviceHandler);
-void CARDvSetLoopbackMode(DWORD_PTR dwIoBase, WORD wLoopbackMode);
-BOOL CARDbSoftwareReset(void *pDeviceHandler);
-void CARDvSetFirstNextTBTT(DWORD_PTR dwIoBase, WORD wBeaconInterval);
-void CARDvUpdateNextTBTT(DWORD_PTR dwIoBase, QWORD qwTSF, WORD wBeaconInterval);
-BOOL CARDbGetCurrentTSF(DWORD_PTR dwIoBase, PQWORD pqwCurrTSF);
-QWORD CARDqGetNextTBTT(QWORD qwTSF, WORD wBeaconInterval);
-QWORD CARDqGetTSFOffset(BYTE byRxRate, QWORD qwTSF1, QWORD qwTSF2);
-BOOL CARDbSetTxPower(void *pDeviceHandler, ULONG ulTxPower);
-BYTE CARDbyGetPktType(void *pDeviceHandler);
+bool CARDbAddBasicRate(void *pDeviceHandler, unsigned short wRateIdx);
+bool CARDbIsOFDMinBasicRate(void *pDeviceHandler);
+void CARDvSetLoopbackMode(unsigned long dwIoBase, unsigned short wLoopbackMode);
+bool CARDbSoftwareReset(void *pDeviceHandler);
+void CARDvSetFirstNextTBTT(unsigned long dwIoBase, unsigned short wBeaconInterval);
+void CARDvUpdateNextTBTT(unsigned long dwIoBase, QWORD qwTSF, unsigned short wBeaconInterval);
+bool CARDbGetCurrentTSF(unsigned long dwIoBase, PQWORD pqwCurrTSF);
+QWORD CARDqGetNextTBTT(QWORD qwTSF, unsigned short wBeaconInterval);
+QWORD CARDqGetTSFOffset(unsigned char byRxRate, QWORD qwTSF1, QWORD qwTSF2);
+bool CARDbSetTxPower(void *pDeviceHandler, unsigned long ulTxPower);
+unsigned char CARDbyGetPktType(void *pDeviceHandler);
 void CARDvSafeResetTx(void *pDeviceHandler);
 void CARDvSafeResetRx(void *pDeviceHandler);
 
 //xxx
-BOOL CARDbRadioPowerOff(void *pDeviceHandler);
-BOOL CARDbRadioPowerOn(void *pDeviceHandler);
-BOOL CARDbSetChannel(void *pDeviceHandler, UINT uConnectionChannel);
-//BOOL CARDbSendPacket(void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktType, UINT uLength);
-BOOL CARDbIsShortPreamble(void *pDeviceHandler);
-BOOL CARDbIsShorSlotTime(void *pDeviceHandler);
-BOOL CARDbSetPhyParameter(void *pDeviceHandler, CARD_PHY_TYPE ePHYType, WORD wCapInfo, BYTE byERPField, void *pvSupportRateIEs, void *pvExtSupportRateIEs);
-BOOL CARDbUpdateTSF(void *pDeviceHandler, BYTE byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF);
-BOOL CARDbStopTxPacket(void *pDeviceHandler, CARD_PKT_TYPE ePktType);
-BOOL CARDbStartTxPacket(void *pDeviceHandler, CARD_PKT_TYPE ePktType);
-BOOL CARDbSetBeaconPeriod(void *pDeviceHandler, WORD wBeaconInterval);
-BOOL CARDbSetBSSID(void *pDeviceHandler, PBYTE pbyBSSID, CARD_OP_MODE eOPMode);
-
-BOOL
+bool CARDbRadioPowerOff(void *pDeviceHandler);
+bool CARDbRadioPowerOn(void *pDeviceHandler);
+//bool CARDbSendPacket(void *pDeviceHandler, void *pPacket, CARD_PKT_TYPE ePktType, unsigned int uLength);
+bool CARDbIsShortPreamble(void *pDeviceHandler);
+bool CARDbIsShorSlotTime(void *pDeviceHandler);
+bool CARDbSetPhyParameter(void *pDeviceHandler, CARD_PHY_TYPE ePHYType, unsigned short wCapInfo, unsigned char byERPField, void *pvSupportRateIEs, void *pvExtSupportRateIEs);
+bool CARDbUpdateTSF(void *pDeviceHandler, unsigned char byRxRate, QWORD qwBSSTimestamp, QWORD qwLocalTSF);
+bool CARDbStopTxPacket(void *pDeviceHandler, CARD_PKT_TYPE ePktType);
+bool CARDbStartTxPacket(void *pDeviceHandler, CARD_PKT_TYPE ePktType);
+bool CARDbSetBeaconPeriod(void *pDeviceHandler, unsigned short wBeaconInterval);
+bool CARDbSetBSSID(void *pDeviceHandler, unsigned char *pbyBSSID, CARD_OP_MODE eOPMode);
+
+bool
 CARDbPowerDown(
     void *pDeviceHandler
     );
 
-BOOL CARDbSetTxDataRate(
+bool CARDbSetTxDataRate(
     void *pDeviceHandler,
-    WORD    wDataRate
+    unsigned short wDataRate
     );
 
 
-BOOL CARDbRemoveKey (void *pDeviceHandler, PBYTE pbyBSSID);
+bool CARDbRemoveKey (void *pDeviceHandler, unsigned char *pbyBSSID);
 
-BOOL
+bool
 CARDbAdd_PMKID_Candidate (
     void *pDeviceHandler,
-    PBYTE            pbyBSSID,
-    BOOL             bRSNCapExist,
-    WORD             wRSNCap
+    unsigned char *pbyBSSID,
+    bool bRSNCapExist,
+    unsigned short wRSNCap
     );
 
 void *
@@ -144,112 +143,55 @@ CARDpGetCurrentAddress (
     void *pDeviceHandler
     );
 
-
-void CARDvInitChannelTable(void *pDeviceHandler);
-BYTE CARDbyGetChannelMapping(void *pDeviceHandler, BYTE byChannelNumber, CARD_PHY_TYPE ePhyType);
-
-BOOL
+bool
 CARDbStartMeasure (
     void *pDeviceHandler,
     void *pvMeasureEIDs,
-    UINT             uNumOfMeasureEIDs
+    unsigned int uNumOfMeasureEIDs
     );
 
-BOOL
+bool
 CARDbChannelSwitch (
     void *pDeviceHandler,
-    BYTE             byMode,
-    BYTE             byNewChannel,
-    BYTE             byCount
+    unsigned char byMode,
+    unsigned char byNewChannel,
+    unsigned char byCount
     );
 
-BOOL
+bool
 CARDbSetQuiet (
     void *pDeviceHandler,
-    BOOL             bResetQuiet,
-    BYTE             byQuietCount,
-    BYTE             byQuietPeriod,
-    WORD             wQuietDuration,
-    WORD             wQuietOffset
+    bool bResetQuiet,
+    unsigned char byQuietCount,
+    unsigned char byQuietPeriod,
+    unsigned short wQuietDuration,
+    unsigned short wQuietOffset
     );
 
-BOOL
+bool
 CARDbStartQuiet (
     void *pDeviceHandler
     );
 
 void
-CARDvSetCountryInfo (
-    void *pDeviceHandler,
-    CARD_PHY_TYPE    ePHYType,
-    void *pIE
-    );
-
-void
 CARDvSetPowerConstraint (
     void *pDeviceHandler,
-    BYTE             byChannel,
-    I8               byPower
+    unsigned char byChannel,
+    char byPower
     );
 
 void
 CARDvGetPowerCapability (
     void *pDeviceHandler,
-    PBYTE           pbyMinPower,
-    PBYTE           pbyMaxPower
+    unsigned char *pbyMinPower,
+    unsigned char *pbyMaxPower
     );
 
-BYTE
-CARDbySetSupportChannels (
-    void *pDeviceHandler,
-    PBYTE        pbyIEs
-    );
-
-I8
+char
 CARDbyGetTransmitPower (
     void *pDeviceHandler
     );
 
-BOOL
-CARDbChannelGetList (
-     UINT       uCountryCodeIdx,
-    PBYTE      pbyChannelTable
-    );
-
-void
-CARDvSetCountryIE(
-    void *pDeviceHandler,
-    void *pIE
-    );
-
-BOOL
-CARDbGetChannelMapInfo(
-    void *pDeviceHandler,
-    UINT         uChannelIndex,
-    PBYTE       pbyChannelNumber,
-    PBYTE       pbyMap
-    );
-
-void
-CARDvSetChannelMapInfo(
-    void *pDeviceHandler,
-    UINT         uChannelIndex,
-    BYTE         byMap
-    );
-
-void
-CARDvClearChannelMapInfo(
-    void *pDeviceHandler
-    );
-
-BYTE
-CARDbyAutoChannelSelect(
-    void *pDeviceHandler,
-    CARD_PHY_TYPE   ePHYType
-    );
-
-BYTE CARDbyGetChannelNumber(void *pDeviceHandler, BYTE byChannelIndex);
-
 #endif // __CARD_H__
 
 
diff --git a/drivers/staging/vt6655/channel.c b/drivers/staging/vt6655/channel.c
new file mode 100644
index 00000000000..47c156bb70a
--- /dev/null
+++ b/drivers/staging/vt6655/channel.c
@@ -0,0 +1,835 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: channel.c
+ *
+ */
+
+#include "baseband.h"
+#include "country.h"
+#include "channel.h"
+#include "device.h"
+#include "rf.h"
+
+/*---------------------  Static Definitions -------------------------*/
+
+#define CARD_MAX_CHANNEL_TBL    56
+
+//static int msglevel = MSG_LEVEL_DEBUG;
+static int msglevel = MSG_LEVEL_INFO;
+
+/*---------------------  Static Variables  --------------------------*/
+
+static SChannelTblElement sChannelTbl[CARD_MAX_CHANNEL_TBL + 1] =
+{
+  {0,   0,    false,    0},
+  {1,   2412, true,     0},
+  {2,   2417, true,     0},
+  {3,   2422, true,     0},
+  {4,   2427, true,     0},
+  {5,   2432, true,     0},
+  {6,   2437, true,     0},
+  {7,   2442, true,     0},
+  {8,   2447, true,     0},
+  {9,   2452, true,     0},
+  {10,  2457, true,     0},
+  {11,  2462, true,     0},
+  {12,  2467, true,     0},
+  {13,  2472, true,     0},
+  {14,  2484, true,     0},
+  {183, 4915, true,     0},
+  {184, 4920, true,     0},
+  {185, 4925, true,     0},
+  {187, 4935, true,     0},
+  {188, 4940, true,     0},
+  {189, 4945, true,     0},
+  {192, 4960, true,     0},
+  {196, 4980, true,     0},
+  {7,   5035, true,     0},
+  {8,   5040, true,     0},
+  {9,   5045, true,     0},
+  {11,  5055, true,     0},
+  {12,  5060, true,     0},
+  {16,  5080, true,     0},
+  {34,  5170, true,     0},
+  {36,  5180, true,     0},
+  {38,  5190, true,     0},
+  {40,  5200, true,     0},
+  {42,  5210, true,     0},
+  {44,  5220, true,     0},
+  {46,  5230, true,     0},
+  {48,  5240, true,     0},
+  {52,  5260, true,     0},
+  {56,  5280, true,     0},
+  {60,  5300, true,     0},
+  {64,  5320, true,     0},
+  {100, 5500, true,     0},
+  {104, 5520, true,     0},
+  {108, 5540, true,     0},
+  {112, 5560, true,     0},
+  {116, 5580, true,     0},
+  {120, 5600, true,     0},
+  {124, 5620, true,     0},
+  {128, 5640, true,     0},
+  {132, 5660, true,     0},
+  {136, 5680, true,     0},
+  {140, 5700, true,     0},
+  {149, 5745, true,     0},
+  {153, 5765, true,     0},
+  {157, 5785, true,     0},
+  {161, 5805, true,     0},
+  {165, 5825, true,     0}
+};
+
+/************************************************************************
+ * The Radar regulation rules for each country
+ ************************************************************************/
+static struct
+{
+	unsigned char byChannelCountryCode;             /* The country code         */
+	char chCountryCode[2];
+	unsigned char bChannelIdxList[CB_MAX_CHANNEL];  /* Available channels Index */
+	unsigned char byPower[CB_MAX_CHANNEL];
+} ChannelRuleTab[] =
+{
+/************************************************************************
+ * This table is based on Athero driver rules
+ ************************************************************************/
+/* Country          Available channels, ended with 0                    */
+/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
+{CCODE_FCC,                     {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_TELEC,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  1,  0,  0,  1,  0,  1,  1,  0,  1,  0,  0,  1,  1,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0, 23,  0,  0, 23,  0, 23, 23,  0, 23,  0,  0, 23, 23, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ETSI,                    {'E','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_RESV3,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV4,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV5,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV6,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV7,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV8,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESV9,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVa,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVb,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVc,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVd,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RESVe,                   {' ',' '},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALLBAND,                 {' ',' '},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALBANIA,                 {'A','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ALGERIA,                 {'D','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ARGENTINA,               {'A','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
+{CCODE_ARMENIA,                 {'A','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_AUSTRALIA,               {'A','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_AUSTRIA,                 {'A','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 15,  0, 15,  0, 15,  0, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_AZERBAIJAN,              {'A','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BAHRAIN,                 {'B','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELARUS,                 {'B','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELGIUM,                 {'B','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BELIZE,                  {'B','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BOLIVIA,                 {'B','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BRAZIL,                  {'B','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_BRUNEI_DARUSSALAM,       {'B','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_BULGARIA,                {'B','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  0,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23,  0,  0, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0}  },
+{CCODE_CANADA,                  {'C','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_CHILE,                   {'C','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17, 17, 17}  },
+{CCODE_CHINA,                   {'C','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_COLOMBIA,                {'C','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_COSTA_RICA,              {'C','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_CROATIA,                 {'H','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_CYPRUS,                  {'C','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_CZECH,                   {'C','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_DENMARK,                 {'D','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_DOMINICAN_REPUBLIC,      {'D','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_ECUADOR,                 {'E','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_EGYPT,                   {'E','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_EL_SALVADOR,             {'S','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ESTONIA,                 {'E','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_FINLAND,                 {'F','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_FRANCE,                  {'F','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GERMANY,                 {'D','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_GREECE,                  {'G','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GEORGIA,                 {'G','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_GUATEMALA,               {'G','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_HONDURAS,                {'H','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_HONG_KONG,               {'H','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_HUNGARY,                 {'H','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ICELAND,                 {'I','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_INDIA,                   {'I','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_INDONESIA,               {'I','D'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_IRAN,                    {'I','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_IRELAND,                 {'I','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_ITALY,                   {'I','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_ISRAEL,                  {'I','L'},  {   0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JAPAN,                   {'J','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JORDAN,                  {'J','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_KAZAKHSTAN,              {'K','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_KUWAIT,                  {'K','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LATVIA,                  {'L','V'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LEBANON,                 {'L','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LEICHTENSTEIN,           {'L','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_LITHUANIA,               {'L','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_LUXEMBURG,               {'L','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_MACAU,                   {'M','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_MACEDONIA,               {'M','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MALTA,                   {'M','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_MALAYSIA,                {'M','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MEXICO,                  {'M','X'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_MONACO,                  {'M','C'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MOROCCO,                 {'M','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_NETHERLANDS,             {'N','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_NEW_ZEALAND,             {'N','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30, 30,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23,  0, 23,  0, 23,  0, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_NORTH_KOREA,             {'K','P'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_NORWAY,                  {'N','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_OMAN,                    {'O','M'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PAKISTAN,                {'P','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PANAMA,                  {'P','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_PERU,                    {'P','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_PHILIPPINES,             {'P','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_POLAND,                  {'P','L'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_PORTUGAL,                {'P','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_PUERTO_RICO,             {'P','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_QATAR,                   {'Q','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ROMANIA,                 {'R','O'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_RUSSIA,                  {'R','U'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SAUDI_ARABIA,            {'S','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SINGAPORE,               {'S','G'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20, 20, 20, 20, 20}  },
+{CCODE_SLOVAKIA,                {'S','K'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_SLOVENIA,                {'S','I'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SOUTH_AFRICA,            {'Z','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SOUTH_KOREA,             {'K','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_SPAIN,                   {'E','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16,  0, 16,  0, 16,  0, 16, 16, 16, 16, 16,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 16, 16, 16, 16,  0}  },
+{CCODE_SWEDEN,                  {'S','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_SWITZERLAND,             {'C','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_SYRIA,                   {'S','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TAIWAN,                  {'T','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17, 17, 17,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30,  0}  },
+{CCODE_THAILAND,                {'T','H'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_TRINIDAD_TOBAGO,         {'T','T'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 18,  0, 18,  0, 18,  0, 18, 18, 18, 18, 18,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TUNISIA,                 {'T','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_TURKEY,                  {'T','R'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UK,                      {'G','B'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 20,  0, 20,  0, 20,  0, 20, 20, 20, 20, 20, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0}  },
+{CCODE_UKRAINE,                 {'U','A'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UNITED_ARAB_EMIRATES,    {'A','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_UNITED_STATES,           {'U','S'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  1}
+                                         ,  {  27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 17,  0, 17,  0, 17,  0, 17, 23, 23, 23, 23,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 30, 30, 30, 30, 30}  },
+{CCODE_URUGUAY,                 {'U','Y'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_UZBEKISTAN,              {'U','Z'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_VENEZUELA,               {'V','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  1,  1,  0}
+                                         ,  {  20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 23, 23, 23, 23,  0}  },
+{CCODE_VIETNAM,                 {'V','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_YEMEN,                   {'Y','E'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_ZIMBABWE,                {'Z','W'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_JAPAN_W52_W53,           {'J','J'},  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  0,  1,  0,  1,  0,  1,  1,  1,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  },
+{CCODE_MAX,                     {'U','N'},  {   1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1,  1}
+                                         ,  {   0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0}  }
+/*                                              1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  */
+};
+
+/*---------------------  Export Functions  --------------------------*/
+
+/**
+ * is_channel_valid() - Is Country Channel Valid
+ *  @ChanneIndex: defined as VT3253 MAC channel:
+ *              1   = 2.4G channel 1
+ *              2   = 2.4G channel 2
+ *              ...
+ *              14  = 2.4G channel 14
+ *              15  = 4.9G channel 183
+ *              16  = 4.9G channel 184
+ *              .....
+ *  Output: true if the specified 5GHz band is allowed to be used,
+ *          false otherwise.
+ * 4.9G => Ch 183, 184, 185, 187, 188, 189, 192, 196 (Value:15 ~ 22)
+ *
+ * 5G => Ch 7, 8, 9, 11, 12, 16, 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64,
+ * 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 (Value 23 ~ 56)
+ */
+
+bool is_channel_valid(unsigned int ChannelIndex)
+{
+	bool bValid;
+
+	bValid = false;
+	/*
+	 * If Channel Index is invalid, return invalid
+	 */
+	if ((ChannelIndex > CB_MAX_CHANNEL) ||
+		(ChannelIndex == 0))
+	{
+		bValid = false;
+		goto exit;
+	}
+
+	bValid = sChannelTbl[ChannelIndex].bValid;
+
+exit:
+	return (bValid);
+
+}
+
+/**
+ * channel_get_list() - Get Available Channel List for a given country
+ * @CountryCode: The country code defined in country.h
+ *
+ * Output:
+ *      pbyChannelTable:   (QWORD *) correspondent bit mask
+ *                          of available channels
+ *                          0x0000000000000001 means channel 1 is supported
+ *                          0x0000000000000003 means channel 1,2 are supported
+ *                          0x000000000000000F means channel 1,2,..15 are supported
+ */
+
+bool channel_get_list(unsigned int uCountryCodeIdx, unsigned char *pbyChannelTable)
+{
+	if (uCountryCodeIdx >= CCODE_MAX)
+		return (false);
+
+	memcpy(pbyChannelTable, ChannelRuleTab[uCountryCodeIdx].bChannelIdxList, CB_MAX_CHANNEL);
+
+	return (true);
+}
+
+void init_channel_table(void *pDeviceHandler)
+{
+	PSDevice    pDevice = (PSDevice) pDeviceHandler;
+	bool bMultiBand = false;
+	unsigned int ii;
+
+	for(ii = 1 ; ii<=CARD_MAX_CHANNEL_TBL ; ii++) {
+		sChannelTbl[ii].bValid = false;
+	}
+
+	switch (pDevice->byRFType) {
+		case RF_RFMD2959 :
+		case RF_AIROHA :
+		case RF_AL2230S:
+		case RF_UW2451 :
+		case RF_VT3226 :
+			//printk("chester-false\n");
+			bMultiBand = false;
+			break;
+		case RF_AIROHA7230 :
+		case RF_UW2452 :
+		case RF_NOTHING :
+		default :
+			bMultiBand = true;
+			break;
+	}
+
+	if ((pDevice->dwDiagRefCount != 0) || (pDevice->b11hEnable == true)) {
+		if (bMultiBand == true) {
+			for(ii = 0 ; ii<CARD_MAX_CHANNEL_TBL ; ii++) {
+				sChannelTbl[ii+1].bValid = true;
+				pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+				pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+			}
+			for(ii = 0 ; ii<CHANNEL_MAX_24G ; ii++) {
+				pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+				pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+			}
+		} else {
+			for(ii = 0 ; ii<CHANNEL_MAX_24G ; ii++) {
+				//2008-8-4 <add> by chester
+				if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+					sChannelTbl[ii+1].bValid = true;
+					pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+					pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
+				}
+			}
+		}
+	} else if (pDevice->byZoneType <= CCODE_MAX) {
+		if (bMultiBand == true) {
+			for(ii = 0 ; ii<CARD_MAX_CHANNEL_TBL ; ii++) {
+				if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+					sChannelTbl[ii+1].bValid = true;
+					pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+					pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+				}
+			}
+		} else {
+			for(ii = 0 ; ii<CHANNEL_MAX_24G ; ii++) {
+				if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+					sChannelTbl[ii+1].bValid = true;
+					pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+					pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+				}
+			}
+		}
+	}
+
+	DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO"Zone=[%d][%c][%c]!!\n",pDevice->byZoneType,ChannelRuleTab[pDevice->byZoneType].chCountryCode[0],ChannelRuleTab[pDevice->byZoneType].chCountryCode[1]);
+
+	for(ii = 0 ; ii<CARD_MAX_CHANNEL_TBL ; ii++) {
+		if (pDevice->abyRegPwr[ii+1] == 0)
+			pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+		if (pDevice->abyLocalPwr[ii+1] == 0)
+			pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
+	}
+}
+
+unsigned char get_channel_mapping(void *pDeviceHandler, unsigned char byChannelNumber, CARD_PHY_TYPE ePhyType)
+{
+	unsigned int ii;
+
+	if ((ePhyType == PHY_TYPE_11B) || (ePhyType == PHY_TYPE_11G))
+		return (byChannelNumber);
+
+	for(ii = (CB_MAX_CHANNEL_24G + 1); ii <= CB_MAX_CHANNEL; ) {
+		if (sChannelTbl[ii].byChannelNumber == byChannelNumber)
+			return ((unsigned char) ii);
+		ii++;
+	}
+	return 0;
+}
+
+unsigned char get_channel_number(void *pDeviceHandler, unsigned char byChannelIndex)
+{
+	//PSDevice    pDevice = (PSDevice) pDeviceHandler;
+	return(sChannelTbl[byChannelIndex].byChannelNumber);
+}
+
+/**
+ * set_channel() - Set NIC media channel
+ *
+ * @pDeviceHandler: The adapter to be set
+ * @uConnectionChannel: Channel to be set
+ *
+ * Return Value: true if succeeded; false if failed.
+ *
+ */
+bool set_channel (void *pDeviceHandler, unsigned int uConnectionChannel)
+{
+	PSDevice pDevice = (PSDevice) pDeviceHandler;
+	bool bResult = true;
+
+
+	if (pDevice->byCurrentCh == uConnectionChannel) {
+		return bResult;
+	}
+
+	if (sChannelTbl[uConnectionChannel].bValid == false) {
+		return (false);
+	}
+
+	if ((uConnectionChannel > CB_MAX_CHANNEL_24G) &&
+			(pDevice->eCurrentPHYType != PHY_TYPE_11A)) {
+		CARDbSetPhyParameter(pDevice, PHY_TYPE_11A, 0, 0, NULL, NULL);
+	} else if ((uConnectionChannel <= CB_MAX_CHANNEL_24G) &&
+			(pDevice->eCurrentPHYType == PHY_TYPE_11A)) {
+		CARDbSetPhyParameter(pDevice, PHY_TYPE_11G, 0, 0, NULL, NULL);
+	}
+	// clear NAV
+	MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MACCR, MACCR_CLRNAV);
+
+	//{{ RobertYu: 20041202
+	//// TX_PE will reserve 3 us for MAX2829 A mode only, it is for better TX throughput
+
+	if ( pDevice->byRFType == RF_AIROHA7230 )
+	{
+		RFbAL7230SelectChannelPostProcess(pDevice->PortOffset, pDevice->byCurrentCh, (unsigned char)uConnectionChannel);
+	}
+	//}} RobertYu
+
+
+	pDevice->byCurrentCh = (unsigned char)uConnectionChannel;
+	bResult &= RFbSelectChannel(pDevice->PortOffset, pDevice->byRFType, (unsigned char)uConnectionChannel);
+
+	// Init Synthesizer Table
+	if (pDevice->bEnablePSMode == true)
+		RFvWriteWakeProgSyn(pDevice->PortOffset, pDevice->byRFType, uConnectionChannel);
+
+
+	//DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"CARDbSetMediaChannel: %d\n", (unsigned char)uConnectionChannel);
+	BBvSoftwareReset(pDevice->PortOffset);
+
+	if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+		// set HW default power register
+		MACvSelectPage1(pDevice->PortOffset);
+		RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
+		VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWRCCK, pDevice->byCurPwr);
+		RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
+		VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWROFDM, pDevice->byCurPwr);
+		MACvSelectPage0(pDevice->PortOffset);
+	}
+
+	if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
+#ifdef	PLICE_DEBUG
+		//printk("Func:ChbSetChannel:call RFbSetPower:11B\n");
+#endif
+		RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
+	} else {
+#ifdef	PLICE_DEBUG
+		//printk("Func:ChbSetChannel:call RFbSetPower\n");
+#endif
+		RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
+	}
+
+	return(bResult);
+}
+
+/**
+ * set_country_info() - Set Channel Info of Country
+ *
+ * Return Value: none.
+ *
+ */
+
+void set_country_info(void *pDeviceHandler, CARD_PHY_TYPE ePHYType, void *pIE)
+{
+	PSDevice pDevice = (PSDevice) pDeviceHandler;
+	unsigned int ii = 0;
+	unsigned int uu = 0;
+	unsigned int step = 0;
+	unsigned int uNumOfCountryInfo = 0;
+	unsigned char byCh = 0;
+	PWLAN_IE_COUNTRY pIE_Country = (PWLAN_IE_COUNTRY) pIE;
+
+
+	uNumOfCountryInfo = (pIE_Country->len - 3);
+	uNumOfCountryInfo /= 3;
+
+	if (ePHYType == PHY_TYPE_11A) {
+		pDevice->bCountryInfo5G = true;
+		for(ii = CB_MAX_CHANNEL_24G + 1 ; ii <= CARD_MAX_CHANNEL_TBL ; ii++) {
+			sChannelTbl[ii].bValid = false;
+		}
+		step = 4;
+	} else {
+		pDevice->bCountryInfo24G = true;
+		for(ii = 1 ; ii <= CB_MAX_CHANNEL_24G ; ii++) {
+			sChannelTbl[ii].bValid = false;
+		}
+		step = 1;
+	}
+	pDevice->abyCountryCode[0] = pIE_Country->abyCountryString[0];
+	pDevice->abyCountryCode[1] = pIE_Country->abyCountryString[1];
+	pDevice->abyCountryCode[2] = pIE_Country->abyCountryString[2];
+
+	for(ii = 0 ; ii < uNumOfCountryInfo ; ii++) {
+		for(uu = 0 ; uu < pIE_Country->abyCountryInfo[ii*3+1] ; uu++) {
+			byCh = get_channel_mapping(pDevice, (unsigned char)(pIE_Country->abyCountryInfo[ii*3]+step*uu), ePHYType);
+			sChannelTbl[byCh].bValid = true;
+			pDevice->abyRegPwr[byCh] = pIE_Country->abyCountryInfo[ii*3+2];
+		}
+	}
+}
+
+/**
+ *
+ * set_support_channels() - Set Support Channels IE defined in 802.11h
+ *
+ * @hDeviceContext: device structure point
+ *
+ * Return Value: none.
+ *
+ */
+
+unsigned char set_support_channels(void *pDeviceHandler, unsigned char *pbyIEs)
+{
+	PSDevice pDevice = (PSDevice) pDeviceHandler;
+	unsigned int ii;
+	unsigned char byCount;
+	PWLAN_IE_SUPP_CH pIE = (PWLAN_IE_SUPP_CH) pbyIEs;
+	unsigned char *pbyChTupple;
+	unsigned char byLen = 0;
+
+
+	pIE->byElementID = WLAN_EID_SUPP_CH;
+	pIE->len = 0;
+	pbyChTupple = pIE->abyChannelTuple;
+	byLen = 2;
+	// lower band
+	byCount = 0;
+	if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[28] == true) {
+		for (ii = 28 ; ii < 36 ; ii+= 2) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == true) {
+				byCount++;
+			}
+		}
+		*pbyChTupple++ = 34;
+		*pbyChTupple++ = byCount;
+		byLen += 2;
+	} else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[29] == true) {
+		for (ii = 29 ; ii < 36 ; ii+= 2) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == true) {
+				byCount++;
+			}
+		}
+		*pbyChTupple++ = 36;
+		*pbyChTupple++ = byCount;
+		byLen += 2;
+	}
+	// middle band
+	byCount = 0;
+	if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[36] == true) {
+		for (ii = 36 ; ii < 40 ; ii++) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == true) {
+				byCount++;
+			}
+		}
+		*pbyChTupple++ = 52;
+		*pbyChTupple++ = byCount;
+		byLen += 2;
+	}
+	// higher band
+	byCount = 0;
+	if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[40] == true) {
+		for (ii = 40 ; ii < 51 ; ii++) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == true) {
+				byCount++;
+			}
+		}
+		*pbyChTupple++ = 100;
+		*pbyChTupple++ = byCount;
+		byLen += 2;
+	} else if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[51] == true) {
+		for (ii = 51 ; ii < 56 ; ii++) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] == true) {
+				byCount++;
+			}
+		}
+		*pbyChTupple++ = 149;
+		*pbyChTupple++ = byCount;
+		byLen += 2;
+	}
+	pIE->len += (byLen - 2);
+	return (byLen);
+}
+
+void set_country_IE(void *pDeviceHandler, void *pIE)
+{
+	PSDevice pDevice = (PSDevice) pDeviceHandler;
+	unsigned int ii;
+	PWLAN_IE_COUNTRY pIECountry = (PWLAN_IE_COUNTRY) pIE;
+
+	pIECountry->byElementID = WLAN_EID_COUNTRY;
+	pIECountry->len = 0;
+	pIECountry->abyCountryString[0] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[0];
+	pIECountry->abyCountryString[1] = ChannelRuleTab[pDevice->byZoneType].chCountryCode[1];
+	pIECountry->abyCountryString[2] = ' ';
+	for (ii = CB_MAX_CHANNEL_24G; ii < CB_MAX_CHANNEL; ii++ ) {
+		if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+			pIECountry->abyCountryInfo[pIECountry->len++] = sChannelTbl[ii+1].byChannelNumber;
+			pIECountry->abyCountryInfo[pIECountry->len++] = 1;
+			pIECountry->abyCountryInfo[pIECountry->len++] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
+		}
+	}
+	pIECountry->len += 3;
+}
+
+bool get_channel_map_info(void *pDeviceHandler, unsigned int uChannelIndex,
+		unsigned char *pbyChannelNumber, unsigned char *pbyMap)
+{
+
+	if (uChannelIndex > CB_MAX_CHANNEL) {
+		return false;
+	}
+	*pbyChannelNumber = sChannelTbl[uChannelIndex].byChannelNumber;
+	*pbyMap = sChannelTbl[uChannelIndex].byMAP;
+	return sChannelTbl[uChannelIndex].bValid;
+}
+
+void set_channel_map_info(void *pDeviceHandler, unsigned int uChannelIndex,
+		unsigned char byMap)
+{
+
+	if (uChannelIndex > CB_MAX_CHANNEL) {
+		return;
+	}
+	sChannelTbl[uChannelIndex].byMAP |= byMap;
+}
+
+void clear_channel_map_info(void *pDeviceHandler)
+{
+	unsigned int ii = 0;
+
+	for (ii = 1; ii <=  CB_MAX_CHANNEL; ii++) {
+		sChannelTbl[ii].byMAP = 0;
+	}
+}
+
+unsigned char auto_channel_select(void *pDeviceHandler, CARD_PHY_TYPE ePHYType)
+{
+	unsigned int ii = 0;
+	unsigned char byOptionChannel = 0;
+	int aiWeight[CB_MAX_CHANNEL_24G+1] = {-1000,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+
+	if (ePHYType == PHY_TYPE_11A) {
+		for(ii = CB_MAX_CHANNEL_24G + 1 ; ii <= CB_MAX_CHANNEL ; ii++) {
+			if (sChannelTbl[ii].bValid == true) {
+				if (byOptionChannel == 0) {
+					byOptionChannel = (unsigned char) ii;
+				}
+				if (sChannelTbl[ii].byMAP == 0) {
+					return ((unsigned char) ii);
+				} else if ( !(sChannelTbl[ii].byMAP & 0x08)) {
+					byOptionChannel = (unsigned char) ii;
+				}
+			}
+		}
+	} else {
+		byOptionChannel = 0;
+		for(ii = 1 ; ii <= CB_MAX_CHANNEL_24G ; ii++) {
+			if (sChannelTbl[ii].bValid == true) {
+				if (sChannelTbl[ii].byMAP == 0) {
+					aiWeight[ii] += 100;
+				} else if (sChannelTbl[ii].byMAP & 0x01) {
+					if (ii > 3) {
+						aiWeight[ii-3] -= 10;
+					}
+					if (ii > 2) {
+						aiWeight[ii-2] -= 20;
+					}
+					if (ii > 1) {
+						aiWeight[ii-1] -= 40;
+					}
+					aiWeight[ii] -= 80;
+					if (ii < CB_MAX_CHANNEL_24G) {
+						aiWeight[ii+1] -= 40;
+					}
+					if (ii < (CB_MAX_CHANNEL_24G - 1)) {
+						aiWeight[ii+2] -= 20;
+					}
+					if (ii < (CB_MAX_CHANNEL_24G - 2)) {
+						aiWeight[ii+3] -= 10;
+					}
+				}
+			}
+		}
+		for(ii = 1 ; ii <= CB_MAX_CHANNEL_24G ; ii++) {
+			if ((sChannelTbl[ii].bValid == true) &&
+					(aiWeight[ii] > aiWeight[byOptionChannel])) {
+				byOptionChannel = (unsigned char) ii;
+			}
+		}
+	}
+	return (byOptionChannel);
+}
diff --git a/drivers/staging/vt6655/channel.h b/drivers/staging/vt6655/channel.h
new file mode 100644
index 00000000000..7038f0d3bde
--- /dev/null
+++ b/drivers/staging/vt6655/channel.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * File: channel.h
+ *
+ */
+
+#ifndef _CHANNEL_H_
+#define _CHANNEL_H_
+
+#include "ttype.h"
+#include "card.h"
+
+/*---------------------  Export Classes  ----------------------------*/
+
+typedef struct tagSChannelTblElement {
+    unsigned char byChannelNumber;
+    unsigned int uFrequency;
+    bool bValid;
+    unsigned char byMAP;
+}SChannelTblElement, *PSChannelTblElement;
+
+
+/*---------------------  Export Functions  --------------------------*/
+
+bool is_channel_valid(unsigned int CountryCode);
+void init_channel_table(void *pDeviceHandler);
+unsigned char get_channel_mapping(void *pDeviceHandler, unsigned char byChannelNumber, CARD_PHY_TYPE ePhyType);
+bool channel_get_list(unsigned int uCountryCodeIdx, unsigned char *pbyChannelTable);
+unsigned char get_channel_number(void *pDeviceHandler, unsigned char byChannelIndex);
+bool set_channel(void *pDeviceHandler, unsigned int uConnectionChannel);
+void set_country_info(void *pDeviceHandler, CARD_PHY_TYPE ePHYType, void *pIE);
+unsigned char set_support_channels(void *pDeviceHandler, unsigned char *pbyIEs);
+void set_country_IE(void *pDeviceHandler, void *pIE);
+bool get_channel_map_info(void *pDeviceHandler, unsigned int uChannelIndex,
+		unsigned char *pbyChannelNumber, unsigned char *pbyMap);
+void set_channel_map_info(void *pDeviceHandler, unsigned int uChannelIndex,
+		unsigned char byMap);
+void clear_channel_map_info(void *pDeviceHandler);
+unsigned char auto_channel_select(void *pDeviceHandler, CARD_PHY_TYPE ePHYType);
+
+
+#endif /* _CHANNEL_H_ */
diff --git a/drivers/staging/vt6655/country.h b/drivers/staging/vt6655/country.h
index 2005d276868..05fda410420 100644
--- a/drivers/staging/vt6655/country.h
+++ b/drivers/staging/vt6655/country.h
@@ -159,19 +159,4 @@ typedef enum _COUNTRY_CODE {
     CCODE_MAX
 } COUNTRY_CODE;
 
-typedef struct tagSCountryTable
-{
-    BYTE    byChannelCountryCode;             /* The country code         */
-    CHAR    chCountryCode[2];
-    BYTE    bChannelIdxList[CB_MAX_CHANNEL];  /* Available channels Index */
-    BYTE    byPower[CB_MAX_CHANNEL];
-}   SCountryTable, *PSCountryTable;
-
-/*---------------------  Export Classes  ----------------------------*/
-
-/*---------------------  Export Variables  --------------------------*/
-extern SCountryTable ChannelRuleTab[CCODE_MAX+1];
-
-/*---------------------  Export Functions  --------------------------*/
-
 #endif  /* __COUNTRY_H__ */
diff --git a/drivers/staging/vt6655/datarate.c b/drivers/staging/vt6655/datarate.c
index 38b09a7fb53..efbb8f45f72 100644
--- a/drivers/staging/vt6655/datarate.c
+++ b/drivers/staging/vt6655/datarate.c
@@ -51,11 +51,11 @@
 /*---------------------  Static Classes  ----------------------------*/
 
 
- extern WORD TxRate_iwconfig; //2008-5-8 <add> by chester
+ extern unsigned short TxRate_iwconfig; //2008-5-8 <add> by chester
 /*---------------------  Static Variables  --------------------------*/
 //static int          msglevel                =MSG_LEVEL_DEBUG;
 static int          msglevel                =MSG_LEVEL_INFO;
-const BYTE acbyIERate[MAX_RATE] =
+const unsigned char acbyIERate[MAX_RATE] =
 {0x02, 0x04, 0x0B, 0x16, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
 
 #define AUTORATE_TXOK_CNT       0x0400
@@ -75,7 +75,7 @@ s_vResetCounter (
     PKnownNodeDB psNodeDBTable
     )
 {
-    BYTE            ii;
+    unsigned char ii;
 
     // clear statistic counter for auto_rate
     for(ii=0;ii<=MAX_RATE;ii++) {
@@ -97,19 +97,19 @@ s_vResetCounter (
  *
  * Parameters:
  *  In:
- *      BYTE    - Rate value in SuppRates IE or ExtSuppRates IE
+ *      unsigned char - Rate value in SuppRates IE or ExtSuppRates IE
  *  Out:
  *      none
  *
  * Return Value: RateIdx
  *
 -*/
-BYTE
+unsigned char
 DATARATEbyGetRateIdx (
-    BYTE byRate
+    unsigned char byRate
     )
 {
-    BYTE    ii;
+    unsigned char ii;
 
     //Erase basicRate flag.
     byRate = byRate & 0x7F;//0111 1111
@@ -151,19 +151,19 @@ DATARATEbyGetRateIdx (
  *
  * Parameters:
  *  In:
- *      BYTE    - Rate value in SuppRates IE or ExtSuppRates IE
+ *      unsigned char - Rate value in SuppRates IE or ExtSuppRates IE
  *  Out:
  *      none
  *
  * Return Value: RateIdx
  *
 -*/
-WORD
+unsigned short
 wGetRateIdx(
-    BYTE byRate
+    unsigned char byRate
     )
 {
-    WORD    ii;
+    unsigned short ii;
 
     //Erase basicRate flag.
     byRate = byRate & 0x7F;//0111 1111
@@ -199,20 +199,20 @@ RATEvParseMaxRate (
     void *pDeviceHandler,
     PWLAN_IE_SUPP_RATES pItemRates,
     PWLAN_IE_SUPP_RATES pItemExtRates,
-    BOOL bUpdateBasicRate,
-    PWORD pwMaxBasicRate,
-    PWORD pwMaxSuppRate,
-    PWORD pwSuppRate,
-    PBYTE pbyTopCCKRate,
-    PBYTE pbyTopOFDMRate
+    bool bUpdateBasicRate,
+    unsigned short *pwMaxBasicRate,
+    unsigned short *pwMaxSuppRate,
+    unsigned short *pwSuppRate,
+    unsigned char *pbyTopCCKRate,
+    unsigned char *pbyTopOFDMRate
     )
 {
 PSDevice  pDevice = (PSDevice) pDeviceHandler;
-UINT  ii;
-BYTE  byHighSuppRate = 0;
-BYTE  byRate = 0;
-WORD  wOldBasicRate = pDevice->wBasicRate;
-UINT  uRateLen;
+unsigned int ii;
+unsigned char byHighSuppRate = 0;
+unsigned char byRate = 0;
+unsigned short wOldBasicRate = pDevice->wBasicRate;
+unsigned int uRateLen;
 
 
     if (pItemRates == NULL)
@@ -231,14 +231,14 @@ UINT  uRateLen;
     }
 
     for (ii = 0; ii < uRateLen; ii++) {
-    	byRate = (BYTE)(pItemRates->abyRates[ii]);
+    	byRate = (unsigned char)(pItemRates->abyRates[ii]);
         if (WLAN_MGMT_IS_BASICRATE(byRate) &&
-            (bUpdateBasicRate == TRUE))  {
+            (bUpdateBasicRate == true))  {
             // Add to basic rate set, update pDevice->byTopCCKBasicRate and pDevice->byTopOFDMBasicRate
             CARDbAddBasicRate((void *)pDevice, wGetRateIdx(byRate));
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", wGetRateIdx(byRate));
         }
-        byRate = (BYTE)(pItemRates->abyRates[ii]&0x7F);
+        byRate = (unsigned char)(pItemRates->abyRates[ii]&0x7F);
         if (byHighSuppRate == 0)
             byHighSuppRate = byRate;
         if (byRate > byHighSuppRate)
@@ -248,20 +248,20 @@ UINT  uRateLen;
     if ((pItemExtRates != NULL) && (pItemExtRates->byElementID == WLAN_EID_EXTSUPP_RATES) &&
         (pDevice->eCurrentPHYType != PHY_TYPE_11B)) {
 
-        UINT  uExtRateLen = pItemExtRates->len;
+        unsigned int uExtRateLen = pItemExtRates->len;
 
         if (uExtRateLen > WLAN_RATES_MAXLEN)
             uExtRateLen = WLAN_RATES_MAXLEN;
 
         for (ii = 0; ii < uExtRateLen ; ii++) {
-            byRate = (BYTE)(pItemExtRates->abyRates[ii]);
+            byRate = (unsigned char)(pItemExtRates->abyRates[ii]);
             // select highest basic rate
             if (WLAN_MGMT_IS_BASICRATE(pItemExtRates->abyRates[ii])) {
             	// Add to basic rate set, update pDevice->byTopCCKBasicRate and pDevice->byTopOFDMBasicRate
                 CARDbAddBasicRate((void *)pDevice, wGetRateIdx(byRate));
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ParseMaxRate AddBasicRate: %d\n", wGetRateIdx(byRate));
             }
-            byRate = (BYTE)(pItemExtRates->abyRates[ii]&0x7F);
+            byRate = (unsigned char)(pItemExtRates->abyRates[ii]&0x7F);
             if (byHighSuppRate == 0)
                 byHighSuppRate = byRate;
             if (byRate > byHighSuppRate)
@@ -314,14 +314,14 @@ RATEvTxRateFallBack (
     )
 {
 PSDevice        pDevice = (PSDevice) pDeviceHandler;
-WORD            wIdxDownRate = 0;
-UINT            ii;
-//DWORD           dwRateTable[MAX_RATE]  = {1,   2,   5,   11,  6,    9,    12,   18,  24,  36,  48,  54};
-BOOL            bAutoRate[MAX_RATE]    = {TRUE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE,TRUE,TRUE,TRUE,TRUE,TRUE};
-DWORD           dwThroughputTbl[MAX_RATE] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
-DWORD           dwThroughput = 0;
-WORD            wIdxUpRate = 0;
-DWORD           dwTxDiff = 0;
+unsigned short wIdxDownRate = 0;
+unsigned int ii;
+//unsigned long dwRateTable[MAX_RATE]  = {1,   2,   5,   11,  6,    9,    12,   18,  24,  36,  48,  54};
+bool bAutoRate[MAX_RATE]    = {true,true,true,true,false,false,true,true,true,true,true,true};
+	unsigned long dwThroughputTbl[MAX_RATE] = {10, 20, 55, 110, 60, 90, 120, 180, 240, 360, 480, 540};
+	unsigned long dwThroughput = 0;
+	unsigned short wIdxUpRate = 0;
+	unsigned long dwTxDiff = 0;
 
     if (pDevice->pMgmt->eScanState != WMAC_NO_SCANNING) {
         // Don't do Fallback when scanning Channel
@@ -346,11 +346,11 @@ DWORD           dwTxDiff = 0;
 
     for(ii=0;ii<MAX_RATE;ii++) {
         if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
-            if (bAutoRate[ii] == TRUE) {
-                wIdxUpRate = (WORD) ii;
+            if (bAutoRate[ii] == true) {
+                wIdxUpRate = (unsigned short) ii;
             }
         } else {
-            bAutoRate[ii] = FALSE;
+            bAutoRate[ii] = false;
         }
     }
 
@@ -372,9 +372,9 @@ DWORD           dwTxDiff = 0;
     for(ii = psNodeDBTable->wTxDataRate; ii > 0;) {
         ii--;
         if ( (dwThroughputTbl[ii] > dwThroughput) &&
-             (bAutoRate[ii]==TRUE) ) {
+             (bAutoRate[ii]==true) ) {
             dwThroughput = dwThroughputTbl[ii];
-            wIdxDownRate = (WORD) ii;
+            wIdxDownRate = (unsigned short) ii;
         }
     }
     psNodeDBTable->wTxDataRate = wIdxDownRate;
@@ -409,14 +409,14 @@ TxRate_iwconfig=psNodeDBTable->wTxDataRate;
  * Return Value: None
  *
 -*/
-BYTE
+unsigned char
 RATEuSetIE (
     PWLAN_IE_SUPP_RATES pSrcRates,
     PWLAN_IE_SUPP_RATES pDstRates,
-    UINT                uRateLen
+    unsigned int uRateLen
     )
 {
-    UINT ii, uu, uRateCnt = 0;
+    unsigned int ii, uu, uRateCnt = 0;
 
     if ((pSrcRates == NULL) || (pDstRates == NULL))
         return 0;
@@ -432,6 +432,6 @@ RATEuSetIE (
             }
         }
     }
-    return (BYTE)uRateCnt;
+    return (unsigned char)uRateCnt;
 }
 
diff --git a/drivers/staging/vt6655/datarate.h b/drivers/staging/vt6655/datarate.h
index b8ca792e9c6..4f8ea0b0532 100644
--- a/drivers/staging/vt6655/datarate.h
+++ b/drivers/staging/vt6655/datarate.h
@@ -59,12 +59,12 @@ RATEvParseMaxRate(
     void *pDeviceHandler,
     PWLAN_IE_SUPP_RATES pItemRates,
     PWLAN_IE_SUPP_RATES pItemExtRates,
-    BOOL bUpdateBasicRate,
-    PWORD pwMaxBasicRate,
-    PWORD pwMaxSuppRate,
-    PWORD pwSuppRate,
-    PBYTE pbyTopCCKRate,
-    PBYTE pbyTopOFDMRate
+    bool bUpdateBasicRate,
+    unsigned short *pwMaxBasicRate,
+    unsigned short *pwMaxSuppRate,
+    unsigned short *pwSuppRate,
+    unsigned char *pbyTopCCKRate,
+    unsigned char *pbyTopOFDMRate
     );
 
 void
@@ -73,22 +73,22 @@ RATEvTxRateFallBack(
     PKnownNodeDB psNodeDBTable
     );
 
-BYTE
+unsigned char
 RATEuSetIE(
     PWLAN_IE_SUPP_RATES pSrcRates,
     PWLAN_IE_SUPP_RATES pDstRates,
-    UINT                uRateLen
+    unsigned int uRateLen
     );
 
-WORD
+unsigned short
 wGetRateIdx(
-    BYTE byRate
+    unsigned char byRate
     );
 
 
-BYTE
+unsigned char
 DATARATEbyGetRateIdx(
-    BYTE byRate
+    unsigned char byRate
     );
 
 
diff --git a/drivers/staging/vt6655/desc.h b/drivers/staging/vt6655/desc.h
index cedb1e7df4f..138897a7932 100644
--- a/drivers/staging/vt6655/desc.h
+++ b/drivers/staging/vt6655/desc.h
@@ -244,10 +244,10 @@ static inline PDEVICE_RD_INFO alloc_rd_info(void) {
 
 /*
 typedef struct tagRDES0 {
-    WORD    wResCount;
-    WORD    wf1Owner ;
-//    WORD    f15Reserved : 15;
-//    WORD    f1Owner : 1;
+    unsigned short wResCount;
+    unsigned short wf1Owner ;
+//    unsigned short f15Reserved : 15;
+//    unsigned short f1Owner : 1;
 } __attribute__ ((__packed__))
 SRDES0;
 */
@@ -255,13 +255,13 @@ SRDES0;
 #ifdef __BIG_ENDIAN
 
 typedef struct tagRDES0 {
-   volatile WORD    wResCount;
+   volatile unsigned short wResCount;
 	union {
-		volatile U16    f15Reserved;
+		volatile u16    f15Reserved;
 		struct {
-            volatile U8 f8Reserved1;
-			volatile U8 f1Owner:1;
-			volatile U8 f7Reserved:7;
+            volatile u8 f8Reserved1;
+			volatile u8 f1Owner:1;
+			volatile u8 f7Reserved:7;
 		} __attribute__ ((__packed__));
 	} __attribute__ ((__packed__));
 } __attribute__ ((__packed__))
@@ -270,9 +270,9 @@ SRDES0, *PSRDES0;
 #else
 
 typedef struct tagRDES0 {
-    WORD    wResCount;
-    WORD    f15Reserved : 15;
-    WORD    f1Owner : 1;
+    unsigned short wResCount;
+    unsigned short f15Reserved : 15;
+    unsigned short f1Owner : 1;
 } __attribute__ ((__packed__))
 SRDES0;
 
@@ -280,8 +280,8 @@ SRDES0;
 #endif
 
 typedef struct tagRDES1 {
-    WORD   wReqCount;
-    WORD   wReserved;
+    unsigned short wReqCount;
+    unsigned short wReserved;
 } __attribute__ ((__packed__))
 SRDES1;
 
@@ -291,11 +291,11 @@ SRDES1;
 typedef struct tagSRxDesc {
     volatile SRDES0 m_rd0RD0;
     volatile SRDES1 m_rd1RD1;
-    volatile U32    buff_addr;
-    volatile U32    next_desc;
+    volatile u32    buff_addr;
+    volatile u32    next_desc;
     struct tagSRxDesc   *next;//4 bytes
     volatile PDEVICE_RD_INFO    pRDInfo;//4 bytes
-    volatile U32    Reserved[2];//8 bytes
+    volatile u32    Reserved[2];//8 bytes
 } __attribute__ ((__packed__))
 SRxDesc, *PSRxDesc;
 typedef const SRxDesc *PCSRxDesc;
@@ -304,24 +304,24 @@ typedef const SRxDesc *PCSRxDesc;
 
 /*
 typedef struct tagTDES0 {
-    volatile    BYTE    byTSR0;
-    volatile    BYTE    byTSR1;
-    volatile    WORD    wOwner_Txtime;
-//    volatile    WORD    f15Txtime : 15;
-//    volatile    WORD    f1Owner:1;
+    volatile    unsigned char byTSR0;
+    volatile    unsigned char byTSR1;
+    volatile    unsigned short wOwner_Txtime;
+//    volatile    unsigned short f15Txtime : 15;
+//    volatile    unsigned short f1Owner:1;
 } __attribute__ ((__packed__))
 STDES0;
 */
 
 typedef struct tagTDES0 {
-    volatile    BYTE    byTSR0;
-    volatile    BYTE    byTSR1;
+    volatile    unsigned char byTSR0;
+    volatile    unsigned char byTSR1;
 	union {
-		volatile U16    f15Txtime;
+		volatile u16    f15Txtime;
 		struct {
-            volatile U8 f8Reserved1;
-			volatile U8 f1Owner:1;
-			volatile U8 f7Reserved:7;
+            volatile u8 f8Reserved1;
+			volatile u8 f1Owner:1;
+			volatile u8 f7Reserved:7;
 		} __attribute__ ((__packed__));
 	} __attribute__ ((__packed__));
 } __attribute__ ((__packed__))
@@ -330,10 +330,10 @@ STDES0, PSTDES0;
 #else
 
 typedef struct tagTDES0 {
-    volatile    BYTE    byTSR0;
-    volatile    BYTE    byTSR1;
-    volatile    WORD    f15Txtime : 15;
-    volatile    WORD    f1Owner:1;
+    volatile    unsigned char byTSR0;
+    volatile    unsigned char byTSR1;
+    volatile    unsigned short f15Txtime : 15;
+    volatile    unsigned short f1Owner:1;
 } __attribute__ ((__packed__))
 STDES0;
 
@@ -341,22 +341,22 @@ STDES0;
 
 
 typedef struct tagTDES1 {
-    volatile    WORD    wReqCount;
-    volatile    BYTE    byTCR;
-    volatile    BYTE    byReserved;
+    volatile    unsigned short wReqCount;
+    volatile    unsigned char byTCR;
+    volatile    unsigned char byReserved;
 } __attribute__ ((__packed__))
 STDES1;
 
 
 typedef struct tagDEVICE_TD_INFO{
     struct sk_buff*     skb;
-    PBYTE               buf;
+    unsigned char *buf;
     dma_addr_t          skb_dma;
     dma_addr_t          buf_dma;
     dma_addr_t          curr_desc;
-    DWORD               dwReqCount;
-    DWORD               dwHeaderLength;
-    BYTE                byFlags;
+    unsigned long dwReqCount;
+    unsigned long dwHeaderLength;
+    unsigned char byFlags;
 } DEVICE_TD_INFO,    *PDEVICE_TD_INFO;
 
 /*
@@ -378,11 +378,11 @@ static inline PDEVICE_TD_INFO alloc_td_info(void) {
 typedef struct tagSTxDesc {
     volatile    STDES0  m_td0TD0;
     volatile    STDES1  m_td1TD1;
-    volatile    U32    buff_addr;
-    volatile    U32    next_desc;
+    volatile    u32    buff_addr;
+    volatile    u32    next_desc;
     struct tagSTxDesc*  next; //4 bytes
     volatile    PDEVICE_TD_INFO pTDInfo;//4 bytes
-    volatile    U32    Reserved[2];//8 bytes
+    volatile    u32    Reserved[2];//8 bytes
 } __attribute__ ((__packed__))
 STxDesc, *PSTxDesc;
 typedef const STxDesc *PCSTxDesc;
@@ -391,13 +391,13 @@ typedef const STxDesc *PCSTxDesc;
 typedef struct tagSTxSyncDesc {
     volatile    STDES0  m_td0TD0;
     volatile    STDES1  m_td1TD1;
-    volatile    DWORD   buff_addr; // pointer to logical buffer
-    volatile    DWORD   next_desc; // pointer to next logical descriptor
-    volatile    WORD    m_wFIFOCtl;
-    volatile    WORD    m_wTimeStamp;
+    volatile    u32 buff_addr; // pointer to logical buffer
+    volatile    u32 next_desc; // pointer to next logical descriptor
+    volatile    unsigned short m_wFIFOCtl;
+    volatile    unsigned short m_wTimeStamp;
     struct tagSTxSyncDesc*  next; //4 bytes
     volatile    PDEVICE_TD_INFO pTDInfo;//4 bytes
-    volatile    DWORD   m_dwReserved2;
+    volatile    u32 m_dwReserved2;
 } __attribute__ ((__packed__))
 STxSyncDesc, *PSTxSyncDesc;
 typedef const STxSyncDesc *PCSTxSyncDesc;
@@ -407,35 +407,35 @@ typedef const STxSyncDesc *PCSTxSyncDesc;
 // RsvTime buffer header
 //
 typedef struct tagSRrvTime_gRTS {
-    WORD        wRTSTxRrvTime_ba;
-    WORD        wRTSTxRrvTime_aa;
-    WORD        wRTSTxRrvTime_bb;
-    WORD        wReserved;
-    WORD        wTxRrvTime_b;
-    WORD        wTxRrvTime_a;
+    unsigned short wRTSTxRrvTime_ba;
+    unsigned short wRTSTxRrvTime_aa;
+    unsigned short wRTSTxRrvTime_bb;
+    unsigned short wReserved;
+    unsigned short wTxRrvTime_b;
+    unsigned short wTxRrvTime_a;
 }__attribute__ ((__packed__))
 SRrvTime_gRTS, *PSRrvTime_gRTS;
 typedef const SRrvTime_gRTS *PCSRrvTime_gRTS;
 
 typedef struct tagSRrvTime_gCTS {
-    WORD        wCTSTxRrvTime_ba;
-    WORD        wReserved;
-    WORD        wTxRrvTime_b;
-    WORD        wTxRrvTime_a;
+    unsigned short wCTSTxRrvTime_ba;
+    unsigned short wReserved;
+    unsigned short wTxRrvTime_b;
+    unsigned short wTxRrvTime_a;
 }__attribute__ ((__packed__))
 SRrvTime_gCTS, *PSRrvTime_gCTS;
 typedef const SRrvTime_gCTS *PCSRrvTime_gCTS;
 
 typedef struct tagSRrvTime_ab {
-    WORD        wRTSTxRrvTime;
-    WORD        wTxRrvTime;
+    unsigned short wRTSTxRrvTime;
+    unsigned short wTxRrvTime;
 }__attribute__ ((__packed__))
 SRrvTime_ab, *PSRrvTime_ab;
 typedef const SRrvTime_ab *PCSRrvTime_ab;
 
 typedef struct tagSRrvTime_atim {
-    WORD        wCTSTxRrvTime_ba;
-    WORD        wTxRrvTime_a;
+    unsigned short wCTSTxRrvTime_ba;
+    unsigned short wTxRrvTime_a;
 }__attribute__ ((__packed__))
 SRrvTime_atim, *PSRrvTime_atim;
 typedef const SRrvTime_atim *PCSRrvTime_atim;
@@ -444,25 +444,25 @@ typedef const SRrvTime_atim *PCSRrvTime_atim;
 // RTS buffer header
 //
 typedef struct tagSRTSData {
-    WORD    wFrameControl;
-    WORD    wDurationID;
-    BYTE    abyRA[ETH_ALEN];
-    BYTE    abyTA[ETH_ALEN];
+    unsigned short wFrameControl;
+    unsigned short wDurationID;
+    unsigned char abyRA[ETH_ALEN];
+    unsigned char abyTA[ETH_ALEN];
 }__attribute__ ((__packed__))
 SRTSData, *PSRTSData;
 typedef const SRTSData *PCSRTSData;
 
 typedef struct tagSRTS_g {
-    BYTE        bySignalField_b;
-    BYTE        byServiceField_b;
-    WORD        wTransmitLength_b;
-    BYTE        bySignalField_a;
-    BYTE        byServiceField_a;
-    WORD        wTransmitLength_a;
-    WORD        wDuration_ba;
-    WORD        wDuration_aa;
-    WORD        wDuration_bb;
-    WORD        wReserved;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned char bySignalField_a;
+    unsigned char byServiceField_a;
+    unsigned short wTransmitLength_a;
+    unsigned short wDuration_ba;
+    unsigned short wDuration_aa;
+    unsigned short wDuration_bb;
+    unsigned short wReserved;
     SRTSData    Data;
 }__attribute__ ((__packed__))
 SRTS_g, *PSRTS_g;
@@ -470,20 +470,20 @@ typedef const SRTS_g *PCSRTS_g;
 
 
 typedef struct tagSRTS_g_FB {
-    BYTE        bySignalField_b;
-    BYTE        byServiceField_b;
-    WORD        wTransmitLength_b;
-    BYTE        bySignalField_a;
-    BYTE        byServiceField_a;
-    WORD        wTransmitLength_a;
-    WORD        wDuration_ba;
-    WORD        wDuration_aa;
-    WORD        wDuration_bb;
-    WORD        wReserved;
-    WORD        wRTSDuration_ba_f0;
-    WORD        wRTSDuration_aa_f0;
-    WORD        wRTSDuration_ba_f1;
-    WORD        wRTSDuration_aa_f1;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned char bySignalField_a;
+    unsigned char byServiceField_a;
+    unsigned short wTransmitLength_a;
+    unsigned short wDuration_ba;
+    unsigned short wDuration_aa;
+    unsigned short wDuration_bb;
+    unsigned short wReserved;
+    unsigned short wRTSDuration_ba_f0;
+    unsigned short wRTSDuration_aa_f0;
+    unsigned short wRTSDuration_ba_f1;
+    unsigned short wRTSDuration_aa_f1;
     SRTSData    Data;
 }__attribute__ ((__packed__))
 SRTS_g_FB, *PSRTS_g_FB;
@@ -491,11 +491,11 @@ typedef const SRTS_g_FB *PCSRTS_g_FB;
 
 
 typedef struct tagSRTS_ab {
-    BYTE        bySignalField;
-    BYTE        byServiceField;
-    WORD        wTransmitLength;
-    WORD        wDuration;
-    WORD        wReserved;
+    unsigned char bySignalField;
+    unsigned char byServiceField;
+    unsigned short wTransmitLength;
+    unsigned short wDuration;
+    unsigned short wReserved;
     SRTSData    Data;
 }__attribute__ ((__packed__))
 SRTS_ab, *PSRTS_ab;
@@ -503,13 +503,13 @@ typedef const SRTS_ab *PCSRTS_ab;
 
 
 typedef struct tagSRTS_a_FB {
-    BYTE        bySignalField;
-    BYTE        byServiceField;
-    WORD        wTransmitLength;
-    WORD        wDuration;
-    WORD        wReserved;
-    WORD        wRTSDuration_f0;
-    WORD        wRTSDuration_f1;
+    unsigned char bySignalField;
+    unsigned char byServiceField;
+    unsigned short wTransmitLength;
+    unsigned short wDuration;
+    unsigned short wReserved;
+    unsigned short wRTSDuration_f0;
+    unsigned short wRTSDuration_f1;
     SRTSData    Data;
 }__attribute__ ((__packed__))
 SRTS_a_FB, *PSRTS_a_FB;
@@ -520,32 +520,32 @@ typedef const SRTS_a_FB *PCSRTS_a_FB;
 // CTS buffer header
 //
 typedef struct tagSCTSData {
-    WORD    wFrameControl;
-    WORD    wDurationID;
-    BYTE    abyRA[ETH_ALEN];
-    WORD    wReserved;
+    unsigned short wFrameControl;
+    unsigned short wDurationID;
+    unsigned char abyRA[ETH_ALEN];
+    unsigned short wReserved;
 }__attribute__ ((__packed__))
 SCTSData, *PSCTSData;
 
 typedef struct tagSCTS {
-    BYTE        bySignalField_b;
-    BYTE        byServiceField_b;
-    WORD        wTransmitLength_b;
-    WORD        wDuration_ba;
-    WORD        wReserved;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned short wDuration_ba;
+    unsigned short wReserved;
     SCTSData    Data;
 }__attribute__ ((__packed__))
 SCTS, *PSCTS;
 typedef const SCTS *PCSCTS;
 
 typedef struct tagSCTS_FB {
-    BYTE        bySignalField_b;
-    BYTE        byServiceField_b;
-    WORD        wTransmitLength_b;
-    WORD        wDuration_ba;
-    WORD        wReserved;
-    WORD        wCTSDuration_ba_f0;
-    WORD        wCTSDuration_ba_f1;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned short wDuration_ba;
+    unsigned short wReserved;
+    unsigned short wCTSDuration_ba_f0;
+    unsigned short wCTSDuration_ba_f1;
     SCTSData    Data;
 }__attribute__ ((__packed__))
 SCTS_FB, *PSCTS_FB;
@@ -556,19 +556,19 @@ typedef const SCTS_FB *PCSCTS_FB;
 // Tx FIFO header
 //
 typedef struct tagSTxBufHead {
-    DWORD   adwTxKey[4];
-    WORD    wFIFOCtl;
-    WORD    wTimeStamp;
-    WORD    wFragCtl;
-    BYTE    byTxPower;
-    BYTE    wReserved;
+    u32 adwTxKey[4];
+    unsigned short wFIFOCtl;
+    unsigned short wTimeStamp;
+    unsigned short wFragCtl;
+    unsigned char byTxPower;
+    unsigned char wReserved;
 }__attribute__ ((__packed__))
 STxBufHead, *PSTxBufHead;
 typedef const STxBufHead *PCSTxBufHead;
 
 typedef struct tagSTxShortBufHead {
-    WORD    wFIFOCtl;
-    WORD    wTimeStamp;
+    unsigned short wFIFOCtl;
+    unsigned short wTimeStamp;
 }__attribute__ ((__packed__))
 STxShortBufHead, *PSTxShortBufHead;
 typedef const STxShortBufHead *PCSTxShortBufHead;
@@ -577,57 +577,57 @@ typedef const STxShortBufHead *PCSTxShortBufHead;
 // Tx data header
 //
 typedef struct tagSTxDataHead_g {
-    BYTE    bySignalField_b;
-    BYTE    byServiceField_b;
-    WORD    wTransmitLength_b;
-    BYTE    bySignalField_a;
-    BYTE    byServiceField_a;
-    WORD    wTransmitLength_a;
-    WORD    wDuration_b;
-    WORD    wDuration_a;
-    WORD    wTimeStampOff_b;
-    WORD    wTimeStampOff_a;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned char bySignalField_a;
+    unsigned char byServiceField_a;
+    unsigned short wTransmitLength_a;
+    unsigned short wDuration_b;
+    unsigned short wDuration_a;
+    unsigned short wTimeStampOff_b;
+    unsigned short wTimeStampOff_a;
 }__attribute__ ((__packed__))
 STxDataHead_g, *PSTxDataHead_g;
 typedef const STxDataHead_g *PCSTxDataHead_g;
 
 typedef struct tagSTxDataHead_g_FB {
-    BYTE    bySignalField_b;
-    BYTE    byServiceField_b;
-    WORD    wTransmitLength_b;
-    BYTE    bySignalField_a;
-    BYTE    byServiceField_a;
-    WORD    wTransmitLength_a;
-    WORD    wDuration_b;
-    WORD    wDuration_a;
-    WORD    wDuration_a_f0;
-    WORD    wDuration_a_f1;
-    WORD    wTimeStampOff_b;
-    WORD    wTimeStampOff_a;
+    unsigned char bySignalField_b;
+    unsigned char byServiceField_b;
+    unsigned short wTransmitLength_b;
+    unsigned char bySignalField_a;
+    unsigned char byServiceField_a;
+    unsigned short wTransmitLength_a;
+    unsigned short wDuration_b;
+    unsigned short wDuration_a;
+    unsigned short wDuration_a_f0;
+    unsigned short wDuration_a_f1;
+    unsigned short wTimeStampOff_b;
+    unsigned short wTimeStampOff_a;
 }__attribute__ ((__packed__))
 STxDataHead_g_FB, *PSTxDataHead_g_FB;
 typedef const STxDataHead_g_FB *PCSTxDataHead_g_FB;
 
 
 typedef struct tagSTxDataHead_ab {
-    BYTE    bySignalField;
-    BYTE    byServiceField;
-    WORD    wTransmitLength;
-    WORD    wDuration;
-    WORD    wTimeStampOff;
+    unsigned char bySignalField;
+    unsigned char byServiceField;
+    unsigned short wTransmitLength;
+    unsigned short wDuration;
+    unsigned short wTimeStampOff;
 }__attribute__ ((__packed__))
 STxDataHead_ab, *PSTxDataHead_ab;
 typedef const STxDataHead_ab *PCSTxDataHead_ab;
 
 
 typedef struct tagSTxDataHead_a_FB {
-    BYTE    bySignalField;
-    BYTE    byServiceField;
-    WORD    wTransmitLength;
-    WORD    wDuration;
-    WORD    wTimeStampOff;
-    WORD    wDuration_f0;
-    WORD    wDuration_f1;
+    unsigned char bySignalField;
+    unsigned char byServiceField;
+    unsigned short wTransmitLength;
+    unsigned short wDuration;
+    unsigned short wTimeStampOff;
+    unsigned short wDuration_f0;
+    unsigned short wDuration_f1;
 }__attribute__ ((__packed__))
 STxDataHead_a_FB, *PSTxDataHead_a_FB;
 typedef const STxDataHead_a_FB *PCSTxDataHead_a_FB;
@@ -636,37 +636,37 @@ typedef const STxDataHead_a_FB *PCSTxDataHead_a_FB;
 // MICHDR data header
 //
 typedef struct tagSMICHDRHead {
-    DWORD   adwHDR0[4];
-    DWORD   adwHDR1[4];
-    DWORD   adwHDR2[4];
+    u32 adwHDR0[4];
+    u32 adwHDR1[4];
+    u32 adwHDR2[4];
 }__attribute__ ((__packed__))
 SMICHDRHead, *PSMICHDRHead;
 typedef const SMICHDRHead *PCSMICHDRHead;
 
 typedef struct tagSBEACONCtl {
-    DWORD   BufReady : 1;
-    DWORD   TSF      : 15;
-    DWORD   BufLen   : 11;
-    DWORD   Reserved : 5;
+    u32 BufReady : 1;
+    u32 TSF      : 15;
+    u32 BufLen   : 11;
+    u32 Reserved : 5;
 }__attribute__ ((__packed__))
 SBEACONCtl;
 
 
 typedef struct tagSSecretKey {
-    DWORD   dwLowDword;
-    BYTE    byHighByte;
+    u32 dwLowDword;
+    unsigned char byHighByte;
 }__attribute__ ((__packed__))
 SSecretKey;
 
 typedef struct tagSKeyEntry {
-    BYTE  abyAddrHi[2];
-    WORD  wKCTL;
-    BYTE  abyAddrLo[4];
-    DWORD dwKey0[4];
-    DWORD dwKey1[4];
-    DWORD dwKey2[4];
-    DWORD dwKey3[4];
-    DWORD dwKey4[4];
+    unsigned char abyAddrHi[2];
+    unsigned short wKCTL;
+    unsigned char abyAddrLo[4];
+    u32 dwKey0[4];
+    u32 dwKey1[4];
+    u32 dwKey2[4];
+    u32 dwKey3[4];
+    u32 dwKey4[4];
 }__attribute__ ((__packed__))
 SKeyEntry;
 /*---------------------  Export Macros ------------------------------*/
diff --git a/drivers/staging/vt6655/device.h b/drivers/staging/vt6655/device.h
index 40ee4e14237..2e7c2fd7b7e 100644
--- a/drivers/staging/vt6655/device.h
+++ b/drivers/staging/vt6655/device.h
@@ -48,10 +48,10 @@
 #include <linux/wait.h>
 #include <linux/if_arp.h>
 #include <linux/sched.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/if.h>
 //#include <linux/config.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/proc_fs.h>
 #include <linux/inetdevice.h>
 #include <linux/reboot.h>
@@ -218,7 +218,7 @@ typedef enum __device_init_type {
 #define NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED	0x01
 
 // PMKID Structures
-typedef UCHAR   NDIS_802_11_PMKID_VALUE[16];
+typedef unsigned char NDIS_802_11_PMKID_VALUE[16];
 
 
 typedef enum _NDIS_802_11_WEP_STATUS
@@ -250,7 +250,7 @@ typedef enum _NDIS_802_11_STATUS_TYPE
 //Added new types for PMKID Candidate lists.
 typedef struct _PMKID_CANDIDATE {
     NDIS_802_11_MAC_ADDRESS BSSID;
-    ULONG Flags;
+    unsigned long Flags;
 } PMKID_CANDIDATE, *PPMKID_CANDIDATE;
 
 
@@ -261,15 +261,15 @@ typedef struct _BSSID_INFO
 } BSSID_INFO, *PBSSID_INFO;
 
 typedef struct tagSPMKID {
-    ULONG Length;
-    ULONG BSSIDInfoCount;
+    unsigned long Length;
+    unsigned long BSSIDInfoCount;
     BSSID_INFO BSSIDInfo[MAX_BSSIDINFO_4_PMKID];
 } SPMKID, *PSPMKID;
 
 typedef struct tagSPMKIDCandidateEvent {
     NDIS_802_11_STATUS_TYPE     StatusType;
-    ULONG Version;       // Version of the structure
-    ULONG NumCandidates; // No. of pmkid candidates
+    unsigned long Version;       // Version of the structure
+    unsigned long NumCandidates; // No. of pmkid candidates
     PMKID_CANDIDATE CandidateList[MAX_PMKIDLIST];
 } SPMKIDCandidateEvent, *PSPMKIDCandidateEvent;
 
@@ -279,10 +279,10 @@ typedef struct tagSPMKIDCandidateEvent {
 #define MAX_QUIET_COUNT     8
 
 typedef struct tagSQuietControl {
-    BOOL        bEnable;
-    DWORD       dwStartTime;
-    BYTE        byPeriod;
-    WORD        wDuration;
+    bool bEnable;
+    unsigned long dwStartTime;
+    unsigned char byPeriod;
+    unsigned short wDuration;
 } SQuietControl, *PSQuietControl;
 
 //--
@@ -291,7 +291,7 @@ typedef struct __chip_info_tbl{
     char*       name;
     int         io_size;
     int         nTxQueue;
-    U32         flags;
+    u32         flags;
 } CHIP_INFO, *PCHIP_INFO;
 
 
@@ -303,15 +303,15 @@ typedef enum {
 
 // The receive duplicate detection cache entry
 typedef struct tagSCacheEntry{
-    WORD        wFmSequence;
-    BYTE        abyAddr2[ETH_ALEN];
+    unsigned short wFmSequence;
+    unsigned char abyAddr2[ETH_ALEN];
 } SCacheEntry, *PSCacheEntry;
 
 typedef struct tagSCache{
 /* The receive cache is updated circularly.  The next entry to be written is
  * indexed by the "InPtr".
 */
-    UINT            uInPtr;         // Place to use next
+    unsigned int uInPtr;         // Place to use next
     SCacheEntry     asCacheEntry[DUPLICATE_RX_CACHE_LENGTH];
 } SCache, *PSCache;
 
@@ -319,14 +319,14 @@ typedef struct tagSCache{
 // DeFragment Control Block, used for collecting fragments prior to reassembly
 typedef struct tagSDeFragControlBlock
 {
-    WORD            wSequence;
-    WORD            wFragNum;
-    BYTE            abyAddr2[ETH_ALEN];
-	UINT            uLifetime;
+    unsigned short wSequence;
+    unsigned short wFragNum;
+    unsigned char abyAddr2[ETH_ALEN];
+    unsigned int uLifetime;
     struct sk_buff* skb;
-    PBYTE           pbyRxBuffer;
-    UINT            cbFrameLength;
-    BOOL            bInUse;
+    unsigned char *pbyRxBuffer;
+    unsigned int cbFrameLength;
+    bool bInUse;
 } SDeFragControlBlock, *PSDeFragControlBlock;
 
 
@@ -386,7 +386,7 @@ typedef struct __device_opt {
     int         short_retry;
     int         long_retry;
     int         bbp_type;
-    U32         flags;
+    u32         flags;
 } OPTIONS, *POPTIONS;
 
 
@@ -417,21 +417,21 @@ typedef struct __device_info {
     dma_addr_t                  tx_bufs_dma1;
     dma_addr_t                  tx_beacon_dma;
 
-    PBYTE                       tx0_bufs;
-    PBYTE                       tx1_bufs;
-    PBYTE                       tx_beacon_bufs;
+    unsigned char *tx0_bufs;
+    unsigned char *tx1_bufs;
+    unsigned char *tx_beacon_bufs;
 
     CHIP_TYPE                   chip_id;
 
-    U32                         PortOffset;
-    DWORD                       dwIsr;
-    U32                         memaddr;
-    U32                         ioaddr;
-    U32                         io_size;
+    unsigned long               PortOffset;
+    unsigned long dwIsr;
+    u32                         memaddr;
+    u32                         ioaddr;
+    u32                         io_size;
 
-    BYTE                        byRevId;
-    WORD                        SubSystemID;
-    WORD                        SubVendorID;
+    unsigned char byRevId;
+    unsigned short SubSystemID;
+    unsigned short SubVendorID;
 
     int                         nTxQueues;
     volatile int                iTDUsed[TYPE_MAXTD];
@@ -448,17 +448,17 @@ typedef struct __device_info {
     SCache                      sDupRxCache;
 
     SDeFragControlBlock         sRxDFCB[CB_MAX_RX_FRAG];
-    UINT                        cbDFCB;
-    UINT                        cbFreeDFCB;
-    UINT                        uCurrentDFCBIdx;
+    unsigned int	cbDFCB;
+    unsigned int	cbFreeDFCB;
+    unsigned int	uCurrentDFCBIdx;
 
     OPTIONS                     sOpts;
 
-    U32                         flags;
+    u32                         flags;
 
-    U32                         rx_buf_sz;
+    u32                         rx_buf_sz;
     int                         multicast_limit;
-    BYTE                        byRxMode;
+    unsigned char byRxMode;
 
     spinlock_t                  lock;
 //PLICE_DEBUG->
@@ -472,19 +472,19 @@ typedef struct __device_info {
 //PLICE_DEBUG <-
 
 
-    U32                         rx_bytes;
+    u32                         rx_bytes;
 
     // Version control
-    BYTE                        byLocalID;
-    BYTE                        byRFType;
+    unsigned char byLocalID;
+    unsigned char byRFType;
 
-    BYTE                        byMaxPwrLevel;
-    BYTE                        byZoneType;
-    BOOL                        bZoneRegExist;
-   BYTE                        byOriginalZonetype;
-    BYTE                        abyMacContext[MAC_MAX_CONTEXT_REG];
-    BOOL                        bLinkPass;          // link status: OK or fail
-    BYTE                        abyCurrentNetAddr[ETH_ALEN];
+    unsigned char byMaxPwrLevel;
+    unsigned char byZoneType;
+    bool bZoneRegExist;
+   unsigned char byOriginalZonetype;
+    unsigned char abyMacContext[MAC_MAX_CONTEXT_REG];
+    bool bLinkPass;          // link status: OK or fail
+    unsigned char abyCurrentNetAddr[ETH_ALEN];
 
     // Adapter statistics
     SStatCounter                scStatistic;
@@ -497,249 +497,249 @@ typedef struct __device_info {
     SMgmtObject                 sMgmtObj;
 
     // 802.11 MAC specific
-    UINT                        uCurrRSSI;
-    BYTE                        byCurrSQ;
-
-    DWORD                       dwTxAntennaSel;
-    DWORD                       dwRxAntennaSel;
-    BYTE                        byAntennaCount;
-    BYTE                        byRxAntennaMode;
-    BYTE                        byTxAntennaMode;
-    BOOL                        bTxRxAntInv;
-
-    PBYTE                       pbyTmpBuff;
-    UINT                        uSIFS;    //Current SIFS
-    UINT                        uDIFS;    //Current DIFS
-    UINT                        uEIFS;    //Current EIFS
-    UINT                        uSlot;    //Current SlotTime
-    UINT                        uCwMin;   //Current CwMin
-    UINT                        uCwMax;   //CwMax is fixed on 1023.
+    unsigned int	uCurrRSSI;
+    unsigned char byCurrSQ;
+
+    unsigned long dwTxAntennaSel;
+    unsigned long dwRxAntennaSel;
+    unsigned char byAntennaCount;
+    unsigned char byRxAntennaMode;
+    unsigned char byTxAntennaMode;
+    bool bTxRxAntInv;
+
+    unsigned char *pbyTmpBuff;
+    unsigned int	uSIFS;    //Current SIFS
+    unsigned int	uDIFS;    //Current DIFS
+    unsigned int	uEIFS;    //Current EIFS
+    unsigned int	uSlot;    //Current SlotTime
+    unsigned int	uCwMin;   //Current CwMin
+    unsigned int	uCwMax;   //CwMax is fixed on 1023.
     // PHY parameter
-    BYTE                        bySIFS;
-    BYTE                        byDIFS;
-    BYTE                        byEIFS;
-    BYTE                        bySlot;
-    BYTE                        byCWMaxMin;
+    unsigned char bySIFS;
+    unsigned char byDIFS;
+    unsigned char byEIFS;
+    unsigned char bySlot;
+    unsigned char byCWMaxMin;
     CARD_PHY_TYPE               eCurrentPHYType;
 
 
     VIA_BB_TYPE                 byBBType; //0: 11A, 1:11B, 2:11G
     VIA_PKT_TYPE                byPacketType; //0:11a,1:11b,2:11gb(only CCK in BasicRate),3:11ga(OFDM in Basic Rate)
-    WORD                        wBasicRate;
-    BYTE                        byACKRate;
-    BYTE                        byTopOFDMBasicRate;
-    BYTE                        byTopCCKBasicRate;
-
-    BYTE                        byMinChannel;
-    BYTE                        byMaxChannel;
-    UINT                        uConnectionRate;
-
-    BYTE                        byPreambleType;
-    BYTE                        byShortPreamble;
-
-    WORD                        wCurrentRate;
-    WORD                        wRTSThreshold;
-    WORD                        wFragmentationThreshold;
-    BYTE                        byShortRetryLimit;
-    BYTE                        byLongRetryLimit;
+    unsigned short wBasicRate;
+    unsigned char byACKRate;
+    unsigned char byTopOFDMBasicRate;
+    unsigned char byTopCCKBasicRate;
+
+    unsigned char byMinChannel;
+    unsigned char byMaxChannel;
+    unsigned int	uConnectionRate;
+
+    unsigned char byPreambleType;
+    unsigned char byShortPreamble;
+
+    unsigned short wCurrentRate;
+    unsigned short wRTSThreshold;
+    unsigned short wFragmentationThreshold;
+    unsigned char byShortRetryLimit;
+    unsigned char byLongRetryLimit;
     CARD_OP_MODE                eOPMode;
-    BYTE                        byOpMode;
-    BOOL                        bBSSIDFilter;
-    WORD                        wMaxTransmitMSDULifetime;
-    BYTE                        abyBSSID[ETH_ALEN];
-    BYTE                        abyDesireBSSID[ETH_ALEN];
-    WORD                        wCTSDuration;       // update while speed change
-    WORD                        wACKDuration;       // update while speed change
-    WORD                        wRTSTransmitLen;    // update while speed change
-    BYTE                        byRTSServiceField;  // update while speed change
-    BYTE                        byRTSSignalField;   // update while speed change
-
-    DWORD                       dwMaxReceiveLifetime;       // dot11MaxReceiveLifetime
-
-    BOOL                        bCCK;
-    BOOL                        bEncryptionEnable;
-    BOOL                        bLongHeader;
-    BOOL                        bShortSlotTime;
-    BOOL                        bProtectMode;
-    BOOL                        bNonERPPresent;
-    BOOL                        bBarkerPreambleMd;
-
-    BYTE                        byERPFlag;
-    WORD                        wUseProtectCntDown;
-
-    BOOL                        bRadioControlOff;
-    BOOL                        bRadioOff;
-    BOOL                    bEnablePSMode;
-    WORD                    wListenInterval;
-    BOOL                    bPWBitOn;
+    unsigned char byOpMode;
+    bool bBSSIDFilter;
+    unsigned short wMaxTransmitMSDULifetime;
+    unsigned char abyBSSID[ETH_ALEN];
+    unsigned char abyDesireBSSID[ETH_ALEN];
+    unsigned short wCTSDuration;       // update while speed change
+    unsigned short wACKDuration;       // update while speed change
+    unsigned short wRTSTransmitLen;    // update while speed change
+    unsigned char byRTSServiceField;  // update while speed change
+    unsigned char byRTSSignalField;   // update while speed change
+
+    unsigned long dwMaxReceiveLifetime;       // dot11MaxReceiveLifetime
+
+    bool bCCK;
+    bool bEncryptionEnable;
+    bool bLongHeader;
+    bool bShortSlotTime;
+    bool bProtectMode;
+    bool bNonERPPresent;
+    bool bBarkerPreambleMd;
+
+    unsigned char byERPFlag;
+    unsigned short wUseProtectCntDown;
+
+    bool bRadioControlOff;
+    bool bRadioOff;
+    bool bEnablePSMode;
+    unsigned short wListenInterval;
+    bool bPWBitOn;
     WMAC_POWER_MODE         ePSMode;
 
 
     // GPIO Radio Control
-    BYTE                    byRadioCtl;
-    BYTE                    byGPIO;
-    BOOL                    bHWRadioOff;
-    BOOL                    bPrvActive4RadioOFF;
-    BOOL                    bGPIOBlockRead;
+    unsigned char byRadioCtl;
+    unsigned char byGPIO;
+    bool bHWRadioOff;
+    bool bPrvActive4RadioOFF;
+    bool bGPIOBlockRead;
 
     // Beacon releated
-    WORD                    wSeqCounter;
-    WORD                    wBCNBufLen;
-    BOOL                    bBeaconBufReady;
-    BOOL                    bBeaconSent;
-    BOOL                    bIsBeaconBufReadySet;
-    UINT                    cbBeaconBufReadySetCnt;
-    BOOL                    bFixRate;
-    BYTE                    byCurrentCh;
-    UINT                    uScanTime;
+    unsigned short wSeqCounter;
+    unsigned short wBCNBufLen;
+    bool bBeaconBufReady;
+    bool bBeaconSent;
+    bool bIsBeaconBufReadySet;
+    unsigned int	cbBeaconBufReadySetCnt;
+    bool bFixRate;
+    unsigned char byCurrentCh;
+    unsigned int	uScanTime;
 
     CMD_STATE               eCommandState;
 
     CMD_CODE                eCommand;
-    BOOL                    bBeaconTx;
+    bool bBeaconTx;
 
-    BOOL                    bStopBeacon;
-    BOOL                    bStopDataPkt;
-    BOOL                    bStopTx0Pkt;
-    UINT                    uAutoReConnectTime;
+    bool bStopBeacon;
+    bool bStopDataPkt;
+    bool bStopTx0Pkt;
+    unsigned int	uAutoReConnectTime;
 
     // 802.11 counter
 
     CMD_ITEM                eCmdQueue[CMD_Q_SIZE];
-    UINT                    uCmdDequeueIdx;
-    UINT                    uCmdEnqueueIdx;
-    UINT                    cbFreeCmdQueue;
-    BOOL                    bCmdRunning;
-    BOOL                    bCmdClear;
+    unsigned int	uCmdDequeueIdx;
+    unsigned int	uCmdEnqueueIdx;
+    unsigned int	cbFreeCmdQueue;
+    bool bCmdRunning;
+    bool bCmdClear;
 
 
 
-    BOOL                    bRoaming;
+    bool bRoaming;
     //WOW
-    BYTE                    abyIPAddr[4];
+    unsigned char abyIPAddr[4];
 
-    ULONG                   ulTxPower;
+    unsigned long ulTxPower;
     NDIS_802_11_WEP_STATUS  eEncryptionStatus;
-    BOOL                    bTransmitKey;
+    bool bTransmitKey;
 //2007-0925-01<Add>by MikeLiu
 //mike add :save old Encryption
     NDIS_802_11_WEP_STATUS  eOldEncryptionStatus;
 
     SKeyManagement          sKey;
-    DWORD                   dwIVCounter;
+    unsigned long dwIVCounter;
 
     QWORD                   qwPacketNumber; //For CCMP and TKIP as TSC(6 bytes)
-    UINT                    uCurrentWEPMode;
+    unsigned int	uCurrentWEPMode;
 
     RC4Ext                  SBox;
-    BYTE                    abyPRNG[WLAN_WEPMAX_KEYLEN+3];
-    BYTE                    byKeyIndex;
-    UINT                    uKeyLength;
-    BYTE                    abyKey[WLAN_WEP232_KEYLEN];
+    unsigned char abyPRNG[WLAN_WEPMAX_KEYLEN+3];
+    unsigned char byKeyIndex;
+    unsigned int	uKeyLength;
+    unsigned char abyKey[WLAN_WEP232_KEYLEN];
 
-    BOOL                    bAES;
-    BYTE                    byCntMeasure;
+    bool bAES;
+    unsigned char byCntMeasure;
 
     // for AP mode
-    UINT                    uAssocCount;
-    BOOL                    bMoreData;
+    unsigned int	uAssocCount;
+    bool bMoreData;
 
     // QoS
-    BOOL                    bGrpAckPolicy;
+    bool bGrpAckPolicy;
 
     // for OID_802_11_ASSOCIATION_INFORMATION
-    BOOL                    bAssocInfoSet;
+    bool bAssocInfoSet;
 
 
-    BYTE                    byAutoFBCtrl;
+    unsigned char byAutoFBCtrl;
 
-    BOOL                    bTxMICFail;
-    BOOL                    bRxMICFail;
+    bool bTxMICFail;
+    bool bRxMICFail;
 
 
-    UINT                    uRATEIdx;
+    unsigned int	uRATEIdx;
 
 
     // For Update BaseBand VGA Gain Offset
-    BOOL                    bUpdateBBVGA;
-    UINT                    uBBVGADiffCount;
-    BYTE                    byBBVGANew;
-    BYTE                    byBBVGACurrent;
-    BYTE                    abyBBVGA[BB_VGA_LEVEL];
-    LONG                    ldBmThreshold[BB_VGA_LEVEL];
+    bool bUpdateBBVGA;
+    unsigned int	uBBVGADiffCount;
+    unsigned char byBBVGANew;
+    unsigned char byBBVGACurrent;
+    unsigned char abyBBVGA[BB_VGA_LEVEL];
+    long                    ldBmThreshold[BB_VGA_LEVEL];
 
-    BYTE                    byBBPreEDRSSI;
-    BYTE                    byBBPreEDIndex;
+    unsigned char byBBPreEDRSSI;
+    unsigned char byBBPreEDIndex;
 
 
-    BOOL                    bRadioCmd;
-    DWORD                   dwDiagRefCount;
+    bool bRadioCmd;
+    unsigned long dwDiagRefCount;
 
     // For FOE Tuning
-    BYTE                    byFOETuning;
+    unsigned char byFOETuning;
 
     // For Auto Power Tunning
 
-    BYTE                    byAutoPwrTunning;
-    SHORT                   sPSetPointCCK;
-    SHORT                   sPSetPointOFDMG;
-    SHORT                   sPSetPointOFDMA;
-    LONG                    lPFormulaOffset;
-    SHORT                   sPThreshold;
-    CHAR                    cAdjustStep;
-    CHAR                    cMinTxAGC;
+    unsigned char byAutoPwrTunning;
+    short                   sPSetPointCCK;
+    short                   sPSetPointOFDMG;
+    short                   sPSetPointOFDMA;
+    long                    lPFormulaOffset;
+    short                   sPThreshold;
+    char                    cAdjustStep;
+    char                    cMinTxAGC;
 
     // For RF Power table
-    BYTE                    byCCKPwr;
-    BYTE                    byOFDMPwrG;
-    BYTE                    byCurPwr;
-    I8                      byCurPwrdBm;
-    BYTE                    abyCCKPwrTbl[CB_MAX_CHANNEL_24G+1];
-    BYTE                    abyOFDMPwrTbl[CB_MAX_CHANNEL+1];
-    I8                      abyCCKDefaultPwr[CB_MAX_CHANNEL_24G+1];
-    I8                      abyOFDMDefaultPwr[CB_MAX_CHANNEL+1];
-    I8                      abyRegPwr[CB_MAX_CHANNEL+1];
-    I8                      abyLocalPwr[CB_MAX_CHANNEL+1];
+    unsigned char byCCKPwr;
+    unsigned char byOFDMPwrG;
+    unsigned char byCurPwr;
+    char	 byCurPwrdBm;
+    unsigned char abyCCKPwrTbl[CB_MAX_CHANNEL_24G+1];
+    unsigned char abyOFDMPwrTbl[CB_MAX_CHANNEL+1];
+    char	abyCCKDefaultPwr[CB_MAX_CHANNEL_24G+1];
+    char	abyOFDMDefaultPwr[CB_MAX_CHANNEL+1];
+    char	abyRegPwr[CB_MAX_CHANNEL+1];
+    char	abyLocalPwr[CB_MAX_CHANNEL+1];
 
 
     // BaseBand Loopback Use
-    BYTE                    byBBCR4d;
-    BYTE                    byBBCRc9;
-    BYTE                    byBBCR88;
-    BYTE                    byBBCR09;
+    unsigned char byBBCR4d;
+    unsigned char byBBCRc9;
+    unsigned char byBBCR88;
+    unsigned char byBBCR09;
 
     // command timer
     struct timer_list       sTimerCommand;
 #ifdef TxInSleep
      struct timer_list       sTimerTxData;
-     ULONG                       nTxDataTimeCout;
-     BOOL  fTxDataInSleep;
-     BOOL  IsTxDataTrigger;
+     unsigned long nTxDataTimeCout;
+     bool fTxDataInSleep;
+     bool IsTxDataTrigger;
 #endif
 
 #ifdef WPA_SM_Transtatus
-    BOOL  fWPA_Authened;           //is WPA/WPA-PSK or WPA2/WPA2-PSK authen??
+    bool fWPA_Authened;           //is WPA/WPA-PSK or WPA2/WPA2-PSK authen??
 #endif
-    BYTE            byReAssocCount;   //mike add:re-association retry times!
-    BYTE            byLinkWaitCount;
+    unsigned char byReAssocCount;   //mike add:re-association retry times!
+    unsigned char byLinkWaitCount;
 
 
-    BYTE                    abyNodeName[17];
+    unsigned char abyNodeName[17];
 
-    BOOL                    bDiversityRegCtlON;
-    BOOL                    bDiversityEnable;
-    ULONG                   ulDiversityNValue;
-    ULONG                   ulDiversityMValue;
-    BYTE                    byTMax;
-    BYTE                    byTMax2;
-    BYTE                    byTMax3;
-    ULONG                   ulSQ3TH;
+    bool bDiversityRegCtlON;
+    bool bDiversityEnable;
+    unsigned long ulDiversityNValue;
+    unsigned long ulDiversityMValue;
+    unsigned char byTMax;
+    unsigned char byTMax2;
+    unsigned char byTMax3;
+    unsigned long ulSQ3TH;
 
 // ANT diversity
-    ULONG                   uDiversityCnt;
-    BYTE                    byAntennaState;
-    ULONG                   ulRatio_State0;
-    ULONG                   ulRatio_State1;
+    unsigned long uDiversityCnt;
+    unsigned char byAntennaState;
+    unsigned long ulRatio_State0;
+    unsigned long ulRatio_State1;
 
     //SQ3 functions for antenna diversity
     struct timer_list           TimerSQ3Tmax1;
@@ -747,80 +747,80 @@ typedef struct __device_info {
     struct timer_list           TimerSQ3Tmax3;
 
 
-    ULONG                   uNumSQ3[MAX_RATE];
-    WORD                    wAntDiversityMaxRate;
+    unsigned long uNumSQ3[MAX_RATE];
+    unsigned short wAntDiversityMaxRate;
 
 
     SEthernetHeader         sTxEthHeader;
     SEthernetHeader         sRxEthHeader;
-    BYTE                    abyBroadcastAddr[ETH_ALEN];
-    BYTE                    abySNAP_RFC1042[ETH_ALEN];
-    BYTE                    abySNAP_Bridgetunnel[ETH_ALEN];
-     BYTE                        abyEEPROM[EEP_MAX_CONTEXT_SIZE];  //DWORD alignment
+    unsigned char abyBroadcastAddr[ETH_ALEN];
+    unsigned char abySNAP_RFC1042[ETH_ALEN];
+    unsigned char abySNAP_Bridgetunnel[ETH_ALEN];
+     unsigned char abyEEPROM[EEP_MAX_CONTEXT_SIZE];  //unsigned long alignment
     // Pre-Authentication & PMK cache
     SPMKID                  gsPMKID;
     SPMKIDCandidateEvent    gsPMKIDCandidate;
 
 
     // for 802.11h
-    BOOL                    b11hEnable;
-    BYTE                    abyCountryCode[3];
+    bool b11hEnable;
+    unsigned char abyCountryCode[3];
     // for 802.11h DFS
-    UINT                    uNumOfMeasureEIDs;
+    unsigned int	uNumOfMeasureEIDs;
     PWLAN_IE_MEASURE_REQ    pCurrMeasureEID;
-    BOOL                    bMeasureInProgress;
-    BYTE                    byOrgChannel;
-    BYTE                    byOrgRCR;
-    DWORD                   dwOrgMAR0;
-    DWORD                   dwOrgMAR4;
-    BYTE                    byBasicMap;
-    BYTE                    byCCAFraction;
-    BYTE                    abyRPIs[8];
-    DWORD                   dwRPIs[8];
-    BOOL                    bChannelSwitch;
-    BYTE                    byNewChannel;
-    BYTE                    byChannelSwitchCount;
-    BOOL                    bQuietEnable;
-    BOOL                    bEnableFirstQuiet;
-    BYTE                    byQuietStartCount;
-    UINT                    uQuietEnqueue;
-    DWORD                   dwCurrentQuietEndTime;
+    bool bMeasureInProgress;
+    unsigned char byOrgChannel;
+    unsigned char byOrgRCR;
+    unsigned long dwOrgMAR0;
+    unsigned long dwOrgMAR4;
+    unsigned char byBasicMap;
+    unsigned char byCCAFraction;
+    unsigned char abyRPIs[8];
+    unsigned long dwRPIs[8];
+    bool bChannelSwitch;
+    unsigned char byNewChannel;
+    unsigned char byChannelSwitchCount;
+    bool bQuietEnable;
+    bool bEnableFirstQuiet;
+    unsigned char byQuietStartCount;
+    unsigned int	uQuietEnqueue;
+    unsigned long dwCurrentQuietEndTime;
     SQuietControl           sQuiet[MAX_QUIET_COUNT];
     // for 802.11h TPC
-    BOOL                    bCountryInfo5G;
-    BOOL                    bCountryInfo24G;
+    bool bCountryInfo5G;
+    bool bCountryInfo24G;
 
-    WORD                    wBeaconInterval;
+    unsigned short wBeaconInterval;
 
     //WPA supplicant deamon
 	struct net_device       *wpadev;
-	BOOL                    bWPADEVUp;
+	bool bWPADEVUp;
     struct sk_buff          *skb;
 #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 /*
-        BOOL                 bwextstep0;
-        BOOL                 bwextstep1;
-        BOOL                 bwextstep2;
-        BOOL                 bwextstep3;
+        bool bwextstep0;
+        bool bwextstep1;
+        bool bwextstep2;
+        bool bwextstep3;
         */
-        UINT                   bwextcount;
-        BOOL                 bWPASuppWextEnabled;
+        unsigned int	bwextcount;
+        bool bWPASuppWextEnabled;
 #endif
 
     //--
 #ifdef HOSTAP
     // user space daemon: hostapd, is used for HOSTAP
-	BOOL                    bEnableHostapd;
-	BOOL                    bEnable8021x;
-	BOOL                    bEnableHostWEP;
+	bool bEnableHostapd;
+	bool bEnable8021x;
+	bool bEnableHostWEP;
 	struct net_device       *apdev;
 	int (*tx_80211)(struct sk_buff *skb, struct net_device *dev);
 #endif
-    UINT                    uChannel;
-    BOOL                    bMACSuspend;
+    unsigned int	uChannel;
+    bool bMACSuspend;
 
 	struct iw_statistics	wstats;		// wireless stats
-    BOOL                    bCommit;
+    bool bCommit;
 
 } DEVICE_INFO, *PSDevice;
 
@@ -880,7 +880,7 @@ void	InitRxManagementQueue(PSDevice   pDevice);
 
 
 
-inline static BOOL device_get_ip(PSDevice pInfo) {
+inline static bool device_get_ip(PSDevice pInfo) {
     struct in_device* in_dev=(struct in_device*) pInfo->dev->ip_ptr;
     struct in_ifaddr* ifa;
 
@@ -888,10 +888,10 @@ inline static BOOL device_get_ip(PSDevice pInfo) {
         ifa=(struct in_ifaddr*) in_dev->ifa_list;
         if (ifa!=NULL) {
             memcpy(pInfo->abyIPAddr,&ifa->ifa_address,4);
-            return TRUE;
+            return true;
         }
     }
-    return FALSE;
+    return false;
 }
 
 
@@ -920,9 +920,9 @@ static inline PDEVICE_TD_INFO alloc_td_info(void) {
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex);
-BOOL device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF);
-int Config_FileOperation(PSDevice pDevice,BOOL fwrite,unsigned char *Parameter);
+bool device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, unsigned int uNodeIndex);
+bool device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF);
+int Config_FileOperation(PSDevice pDevice, bool fwrite, unsigned char *Parameter);
 #endif
 
 
diff --git a/drivers/staging/vt6655/device_cfg.h b/drivers/staging/vt6655/device_cfg.h
index d1e9c1930bd..408edc27075 100644
--- a/drivers/staging/vt6655/device_cfg.h
+++ b/drivers/staging/vt6655/device_cfg.h
@@ -39,14 +39,6 @@ struct _version {
     unsigned char   build;
 } version_t, *pversion_t;
 
-#ifndef FALSE
-#define FALSE   (0)
-#endif
-
-#ifndef TRUE
-#define TRUE    (!(FALSE))
-#endif
-
 #define VID_TABLE_SIZE      64
 #define MCAST_TABLE_SIZE    64
 #define MCAM_SIZE           32
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index e49bb258b5c..4d6b66a4fd9 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -26,9 +26,9 @@
  *
  * Functions:
  *
- *   device_found1 - module initial (insmod) driver entry
- *   device_remove1 - module remove entry
- *   device_init_info - device structure resource allocation function
+ *   vt6655_probe - module initial (insmod) driver entry
+ *   vt6655_remove - module remove entry
+ *   vt6655_init_info - device structure resource allocation function
  *   device_free_info - device structure resource free function
  *   device_get_pci_info - get allocated pci io/mem resource
  *   device_print_info - print out resource
@@ -62,6 +62,7 @@
 
 #include "device.h"
 #include "card.h"
+#include "channel.h"
 #include "baseband.h"
 #include "mac.h"
 #include "tether.h"
@@ -133,10 +134,10 @@ DEVICE_PARAM(TxDescriptors1,"Number of transmit descriptors1");
 
 
 #define IP_ALIG_DEF     0
-/* IP_byte_align[] is used for IP header DWORD byte aligned
-   0: indicate the IP header won't be DWORD byte aligned.(Default) .
-   1: indicate the IP header will be DWORD byte aligned.
-      In some enviroment, the IP header should be DWORD byte aligned,
+/* IP_byte_align[] is used for IP header unsigned long byte aligned
+   0: indicate the IP header won't be unsigned long byte aligned.(Default) .
+   1: indicate the IP header will be unsigned long byte aligned.
+      In some enviroment, the IP header should be unsigned long byte aligned,
       or the packet will be droped when we receive it. (eg: IPVS)
 */
 DEVICE_PARAM(IP_byte_align,"Enable IP header dword aligned");
@@ -284,7 +285,7 @@ static CHIP_INFO chip_info_table[]= {
     {0,NULL}
 };
 
-DEFINE_PCI_DEVICE_TABLE(device_id_table) = {
+DEFINE_PCI_DEVICE_TABLE(vt6655_pci_id_table) = {
 	{ PCI_VDEVICE(VIA, 0x3253), (kernel_ulong_t)chip_info_table},
 	{ 0, }
 };
@@ -292,10 +293,10 @@ DEFINE_PCI_DEVICE_TABLE(device_id_table) = {
 /*---------------------  Static Functions  --------------------------*/
 
 
-static int  device_found1(struct pci_dev *pcid, const struct pci_device_id *ent);
-static BOOL device_init_info(struct pci_dev* pcid, PSDevice* ppDevice, PCHIP_INFO);
+static int  vt6655_probe(struct pci_dev *pcid, const struct pci_device_id *ent);
+static bool vt6655_init_info(struct pci_dev* pcid, PSDevice* ppDevice, PCHIP_INFO);
 static void device_free_info(PSDevice pDevice);
-static BOOL device_get_pci_info(PSDevice, struct pci_dev* pcid);
+static bool device_get_pci_info(PSDevice, struct pci_dev* pcid);
 static void device_print_info(PSDevice pDevice);
 static struct net_device_stats *device_get_stats(struct net_device *dev);
 static void device_init_diversity_timer(PSDevice pDevice);
@@ -326,12 +327,12 @@ static void device_init_td1_ring(PSDevice pDevice);
 
 static int  device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev);
 //2008-0714<Add>by Mike Liu
-static BOOL device_release_WPADEV(PSDevice pDevice);
+static bool device_release_WPADEV(PSDevice pDevice);
 
 static int  ethtool_ioctl(struct net_device *dev, void *useraddr);
-static int  device_rx_srv(PSDevice pDevice, UINT uIdx);
-static int  device_tx_srv(PSDevice pDevice, UINT uIdx);
-static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pDesc);
+static int  device_rx_srv(PSDevice pDevice, unsigned int uIdx);
+static int  device_tx_srv(PSDevice pDevice, unsigned int uIdx);
+static bool device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pDesc);
 static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType);
 static void device_free_tx_buf(PSDevice pDevice, PSTxDesc pDesc);
 static void device_free_td0_ring(PSDevice pDevice);
@@ -340,7 +341,8 @@ static void device_free_rd0_ring(PSDevice pDevice);
 static void device_free_rd1_ring(PSDevice pDevice);
 static void device_free_rings(PSDevice pDevice);
 static void device_free_frag_buf(PSDevice pDevice);
-static int Config_FileGetParameter(UCHAR *string, UCHAR *dest,UCHAR *source);
+static int Config_FileGetParameter(unsigned char *string,
+		unsigned char *dest, unsigned char *source);
 
 
 /*---------------------  Export Variables  --------------------------*/
@@ -357,7 +359,7 @@ static char* get_chip_name(int chip_id) {
     return chip_info_table[i].name;
 }
 
-static void device_remove1(struct pci_dev *pcid)
+static void __devexit vt6655_remove(struct pci_dev *pcid)
 {
     PSDevice pDevice=pci_get_drvdata(pcid);
 
@@ -384,7 +386,7 @@ device_set_int_opt(int *opt, int val, int min, int max, int def,char* name,char*
 }
 
 static void
-device_set_bool_opt(unsigned int *opt, int val,BOOL def,U32 flag, char* name,char* devname) {
+device_set_bool_opt(unsigned int *opt, int val,bool def,u32 flag, char* name,char* devname) {
     (*opt)&=(~flag);
     if (val==-1)
         *opt|=(def ? flag : 0);
@@ -394,7 +396,7 @@ device_set_bool_opt(unsigned int *opt, int val,BOOL def,U32 flag, char* name,cha
         *opt|=(def ? flag : 0);
     } else {
         DBG_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: set parameter %s to %s\n",
-            devname,name , val ? "TRUE" : "FALSE");
+            devname,name , val ? "true" : "false");
         *opt|=(val ? flag : 0);
     }
 }
@@ -429,9 +431,9 @@ pOpts->flags|=DEVICE_FLAGS_DiversityANT;
 static void
 device_set_options(PSDevice pDevice) {
 
-    BYTE    abyBroadcastAddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-    BYTE    abySNAP_RFC1042[ETH_ALEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
-    BYTE    abySNAP_Bridgetunnel[ETH_ALEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0xF8};
+    unsigned char abyBroadcastAddr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+    unsigned char abySNAP_RFC1042[ETH_ALEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00};
+    unsigned char abySNAP_Bridgetunnel[ETH_ALEN] = {0xAA, 0xAA, 0x03, 0x00, 0x00, 0xF8};
 
 
     memcpy(pDevice->abyBroadcastAddr, abyBroadcastAddr, ETH_ALEN);
@@ -450,7 +452,7 @@ device_set_options(PSDevice pDevice) {
     pDevice->b11hEnable = (pDevice->sOpts.flags & DEVICE_FLAGS_80211h_MODE) ? 1 : 0;
     pDevice->bDiversityRegCtlON = (pDevice->sOpts.flags & DEVICE_FLAGS_DiversityANT) ? 1 : 0;
     pDevice->uConnectionRate = pDevice->sOpts.data_rate;
-    if (pDevice->uConnectionRate < RATE_AUTO) pDevice->bFixRate = TRUE;
+    if (pDevice->uConnectionRate < RATE_AUTO) pDevice->bFixRate = true;
     pDevice->byBBType = pDevice->sOpts.bbp_type;
     pDevice->byPacketType = pDevice->byBBType;
 
@@ -458,45 +460,45 @@ device_set_options(PSDevice pDevice) {
 	pDevice->byAutoFBCtrl = AUTO_FB_0;
 	//pDevice->byAutoFBCtrl = AUTO_FB_1;
 //PLICE_DEBUG<-
-pDevice->bUpdateBBVGA = TRUE;
+pDevice->bUpdateBBVGA = true;
     pDevice->byFOETuning = 0;
     pDevice->wCTSDuration = 0;
     pDevice->byPreambleType = 0;
 
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uChannel= %d\n",(INT)pDevice->uChannel);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byOpMode= %d\n",(INT)pDevice->byOpMode);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" ePSMode= %d\n",(INT)pDevice->ePSMode);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" wRTSThreshold= %d\n",(INT)pDevice->wRTSThreshold);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortRetryLimit= %d\n",(INT)pDevice->byShortRetryLimit);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byLongRetryLimit= %d\n",(INT)pDevice->byLongRetryLimit);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byPreambleType= %d\n",(INT)pDevice->byPreambleType);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortPreamble= %d\n",(INT)pDevice->byShortPreamble);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uConnectionRate= %d\n",(INT)pDevice->uConnectionRate);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byBBType= %d\n",(INT)pDevice->byBBType);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->b11hEnable= %d\n",(INT)pDevice->b11hEnable);
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->bDiversityRegCtlON= %d\n",(INT)pDevice->bDiversityRegCtlON);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uChannel= %d\n",(int)pDevice->uChannel);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byOpMode= %d\n",(int)pDevice->byOpMode);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" ePSMode= %d\n",(int)pDevice->ePSMode);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" wRTSThreshold= %d\n",(int)pDevice->wRTSThreshold);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortRetryLimit= %d\n",(int)pDevice->byShortRetryLimit);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byLongRetryLimit= %d\n",(int)pDevice->byLongRetryLimit);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byPreambleType= %d\n",(int)pDevice->byPreambleType);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byShortPreamble= %d\n",(int)pDevice->byShortPreamble);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" uConnectionRate= %d\n",(int)pDevice->uConnectionRate);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" byBBType= %d\n",(int)pDevice->byBBType);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->b11hEnable= %d\n",(int)pDevice->b11hEnable);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" pDevice->bDiversityRegCtlON= %d\n",(int)pDevice->bDiversityRegCtlON);
 }
 
-static void s_vCompleteCurrentMeasure (PSDevice pDevice, BYTE byResult)
+static void s_vCompleteCurrentMeasure (PSDevice pDevice, unsigned char byResult)
 {
-    UINT    ii;
-    DWORD   dwDuration = 0;
-    BYTE    byRPI0 = 0;
+    unsigned int ii;
+    unsigned long dwDuration = 0;
+    unsigned char byRPI0 = 0;
 
     for(ii=1;ii<8;ii++) {
         pDevice->dwRPIs[ii] *= 255;
-        dwDuration |= *((PWORD) (pDevice->pCurrMeasureEID->sReq.abyDuration));
+        dwDuration |= *((unsigned short *) (pDevice->pCurrMeasureEID->sReq.abyDuration));
         dwDuration <<= 10;
         pDevice->dwRPIs[ii] /= dwDuration;
-        pDevice->abyRPIs[ii] = (BYTE) pDevice->dwRPIs[ii];
+        pDevice->abyRPIs[ii] = (unsigned char) pDevice->dwRPIs[ii];
         byRPI0 += pDevice->abyRPIs[ii];
     }
     pDevice->abyRPIs[0] = (0xFF - byRPI0);
 
      if (pDevice->uNumOfMeasureEIDs == 0) {
         VNTWIFIbMeasureReport(  pDevice->pMgmt,
-                                TRUE,
+                                true,
                                 pDevice->pCurrMeasureEID,
                                 byResult,
                                 pDevice->byBasicMap,
@@ -505,7 +507,7 @@ static void s_vCompleteCurrentMeasure (PSDevice pDevice, BYTE byResult)
                                 );
     } else {
         VNTWIFIbMeasureReport(  pDevice->pMgmt,
-                                FALSE,
+                                false,
                                 pDevice->pCurrMeasureEID,
                                 byResult,
                                 pDevice->byBasicMap,
@@ -525,12 +527,12 @@ static void s_vCompleteCurrentMeasure (PSDevice pDevice, BYTE byResult)
 
 static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
 {
-    UINT    ii;
-    BYTE    byValue;
-	BYTE    byValue1;
-    BYTE    byCCKPwrdBm = 0;
-    BYTE    byOFDMPwrdBm = 0;
-    INT zonetype=0;
+    unsigned int ii;
+    unsigned char byValue;
+    unsigned char byValue1;
+    unsigned char byCCKPwrdBm = 0;
+    unsigned char byOFDMPwrdBm = 0;
+    int zonetype=0;
      PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
     MACbShutdown(pDevice->PortOffset);
     BBvSoftwareReset(pDevice->PortOffset);
@@ -540,11 +542,11 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
         // Do MACbSoftwareReset in MACvInitialize
         MACbSoftwareReset(pDevice->PortOffset);
         // force CCK
-        pDevice->bCCK = TRUE;
-        pDevice->bAES = FALSE;
-        pDevice->bProtectMode = FALSE;      //Only used in 11g type, sync with ERP IE
-        pDevice->bNonERPPresent = FALSE;
-        pDevice->bBarkerPreambleMd = FALSE;
+        pDevice->bCCK = true;
+        pDevice->bAES = false;
+        pDevice->bProtectMode = false;      //Only used in 11g type, sync with ERP IE
+        pDevice->bNonERPPresent = false;
+        pDevice->bBarkerPreambleMd = false;
         pDevice->wCurrentRate = RATE_1M;
         pDevice->byTopOFDMBasicRate = RATE_24M;
         pDevice->byTopCCKBasicRate = RATE_1M;
@@ -570,9 +572,9 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
         // Get Antena
         byValue = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ANTENNA);
         if (byValue & EEP_ANTINV)
-            pDevice->bTxRxAntInv = TRUE;
+            pDevice->bTxRxAntInv = true;
         else
-            pDevice->bTxRxAntInv = FALSE;
+            pDevice->bTxRxAntInv = false;
 #ifdef	PLICE_DEBUG
 	//printk("init_register:TxRxAntInv is %d,byValue is %d\n",pDevice->bTxRxAntInv,byValue);
 #endif
@@ -587,7 +589,7 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
         pDevice->ulDiversityMValue = 100*16;//SROMbyReadEmbedded(pDevice->PortOffset, 0x52);
         pDevice->byTMax = 1;//SROMbyReadEmbedded(pDevice->PortOffset, 0x53);
         pDevice->byTMax2 = 4;//SROMbyReadEmbedded(pDevice->PortOffset, 0x54);
-        pDevice->ulSQ3TH = 0;//(ULONG) SROMbyReadEmbedded(pDevice->PortOffset, 0x55);
+        pDevice->ulSQ3TH = 0;//(unsigned long) SROMbyReadEmbedded(pDevice->PortOffset, 0x55);
         pDevice->byTMax3 = 64;//SROMbyReadEmbedded(pDevice->PortOffset, 0x56);
 
         if (byValue == (EEP_ANTENNA_AUX | EEP_ANTENNA_MAIN)) {
@@ -595,7 +597,7 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
             pDevice->byTxAntennaMode = ANT_B;
             pDevice->dwTxAntennaSel = 1;
             pDevice->dwRxAntennaSel = 1;
-            if (pDevice->bTxRxAntInv == TRUE)
+            if (pDevice->bTxRxAntInv == true)
                 pDevice->byRxAntennaMode = ANT_A;
             else
                 pDevice->byRxAntennaMode = ANT_B;
@@ -603,26 +605,26 @@ static void device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
 byValue1 = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ANTENNA);
           //  if (pDevice->bDiversityRegCtlON)
           if((byValue1&0x08)==0)
-                pDevice->bDiversityEnable = FALSE;//SROMbyReadEmbedded(pDevice->PortOffset, 0x50);
+                pDevice->bDiversityEnable = false;//SROMbyReadEmbedded(pDevice->PortOffset, 0x50);
             else
-                pDevice->bDiversityEnable = TRUE;
+                pDevice->bDiversityEnable = true;
 #ifdef	PLICE_DEBUG
 		//printk("aux |main antenna: RxAntennaMode is %d\n",pDevice->byRxAntennaMode);
 #endif
 	} else  {
-            pDevice->bDiversityEnable = FALSE;
+            pDevice->bDiversityEnable = false;
             pDevice->byAntennaCount = 1;
             pDevice->dwTxAntennaSel = 0;
             pDevice->dwRxAntennaSel = 0;
             if (byValue & EEP_ANTENNA_AUX) {
                 pDevice->byTxAntennaMode = ANT_A;
-                if (pDevice->bTxRxAntInv == TRUE)
+                if (pDevice->bTxRxAntInv == true)
                     pDevice->byRxAntennaMode = ANT_B;
                 else
                     pDevice->byRxAntennaMode = ANT_A;
             } else {
                 pDevice->byTxAntennaMode = ANT_B;
-                if (pDevice->bTxRxAntInv == TRUE)
+                if (pDevice->bTxRxAntInv == true)
                     pDevice->byRxAntennaMode = ANT_A;
                 else
                     pDevice->byRxAntennaMode = ANT_B;
@@ -638,7 +640,7 @@ byValue1 = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_ANTENNA);
 //2008-8-4 <add> by chester
 //zonetype initial
  pDevice->byOriginalZonetype = pDevice->abyEEPROM[EEP_OFS_ZONETYPE];
- zonetype = Config_FileOperation(pDevice,FALSE,NULL);
+ zonetype = Config_FileOperation(pDevice,false,NULL);
  if (zonetype >= 0) {         //read zonetype file ok!
   if ((zonetype == 0)&&
         (pDevice->abyEEPROM[EEP_OFS_ZONETYPE] !=0x00)){          //for USA
@@ -680,7 +682,7 @@ else
         pDevice->byRFType &= RF_MASK;
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->byRFType = %x\n", pDevice->byRFType);
 
-        if (pDevice->bZoneRegExist == FALSE) {
+        if (pDevice->bZoneRegExist == false) {
             pDevice->byZoneType = pDevice->abyEEPROM[EEP_OFS_ZONETYPE];
         }
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->byZoneType = %x\n", pDevice->byZoneType);
@@ -700,11 +702,11 @@ else
 
 
         for (ii=0;ii<CB_MAX_CHANNEL_24G;ii++) {
-            pDevice->abyCCKPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_CCK_PWR_TBL));
+            pDevice->abyCCKPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (unsigned char)(ii + EEP_OFS_CCK_PWR_TBL));
             if (pDevice->abyCCKPwrTbl[ii+1] == 0) {
                 pDevice->abyCCKPwrTbl[ii+1] = pDevice->byCCKPwr;
             }
-            pDevice->abyOFDMPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDM_PWR_TBL));
+            pDevice->abyOFDMPwrTbl[ii+1] = SROMbyReadEmbedded(pDevice->PortOffset, (unsigned char)(ii + EEP_OFS_OFDM_PWR_TBL));
             if (pDevice->abyOFDMPwrTbl[ii+1] == 0) {
                 pDevice->abyOFDMPwrTbl[ii+1] = pDevice->byOFDMPwrG;
             }
@@ -726,10 +728,10 @@ else
 
         // Load OFDM A Power Table
         for (ii=0;ii<CB_MAX_CHANNEL_5G;ii++) { //RobertYu:20041224, bug using CB_MAX_CHANNEL
-            pDevice->abyOFDMPwrTbl[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDMA_PWR_TBL));
-            pDevice->abyOFDMDefaultPwr[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (BYTE)(ii + EEP_OFS_OFDMA_PWR_dBm));
+            pDevice->abyOFDMPwrTbl[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (unsigned char)(ii + EEP_OFS_OFDMA_PWR_TBL));
+            pDevice->abyOFDMDefaultPwr[ii+CB_MAX_CHANNEL_24G+1] = SROMbyReadEmbedded(pDevice->PortOffset, (unsigned char)(ii + EEP_OFS_OFDMA_PWR_dBm));
         }
-        CARDvInitChannelTable((void *)pDevice);
+        init_channel_table((void *)pDevice);
 
 
         if (pDevice->byLocalID > REV_ID_VT3253_B1) {
@@ -773,38 +775,38 @@ else
         if (pDevice->uConnectionRate == RATE_AUTO) {
             pDevice->wCurrentRate = RATE_54M;
         } else {
-            pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+            pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
         }
 
         // default G Mode
         VNTWIFIbConfigPhyMode(pDevice->pMgmt, PHY_TYPE_11G);
         VNTWIFIbConfigPhyMode(pDevice->pMgmt, PHY_TYPE_AUTO);
 
-        pDevice->bRadioOff = FALSE;
+        pDevice->bRadioOff = false;
 
         pDevice->byRadioCtl = SROMbyReadEmbedded(pDevice->PortOffset, EEP_OFS_RADIOCTL);
-        pDevice->bHWRadioOff = FALSE;
+        pDevice->bHWRadioOff = false;
 
         if (pDevice->byRadioCtl & EEP_RADIOCTL_ENABLE) {
             // Get GPIO
             MACvGPIOIn(pDevice->PortOffset, &pDevice->byGPIO);
 //2008-4-14 <add> by chester for led issue
  #ifdef FOR_LED_ON_NOTEBOOK
-if (pDevice->byGPIO & GPIO0_DATA){pDevice->bHWRadioOff = TRUE;}
-if ( !(pDevice->byGPIO & GPIO0_DATA)){pDevice->bHWRadioOff = FALSE;}
+if (pDevice->byGPIO & GPIO0_DATA){pDevice->bHWRadioOff = true;}
+if ( !(pDevice->byGPIO & GPIO0_DATA)){pDevice->bHWRadioOff = false;}
 
             }
-        if ( (pDevice->bRadioControlOff == TRUE)) {
+        if ( (pDevice->bRadioControlOff == true)) {
             CARDbRadioPowerOff(pDevice);
         }
 else  CARDbRadioPowerOn(pDevice);
 #else
             if (((pDevice->byGPIO & GPIO0_DATA) && !(pDevice->byRadioCtl & EEP_RADIOCTL_INV)) ||
                 ( !(pDevice->byGPIO & GPIO0_DATA) && (pDevice->byRadioCtl & EEP_RADIOCTL_INV))) {
-                pDevice->bHWRadioOff = TRUE;
+                pDevice->bHWRadioOff = true;
             }
         }
-        if ((pDevice->bHWRadioOff == TRUE) || (pDevice->bRadioControlOff == TRUE)) {
+        if ((pDevice->bHWRadioOff == true) || (pDevice->bRadioControlOff == true)) {
             CARDbRadioPowerOff(pDevice);
         }
 
@@ -850,17 +852,17 @@ else  CARDbRadioPowerOn(pDevice);
 static void device_init_diversity_timer(PSDevice pDevice) {
 
     init_timer(&pDevice->TimerSQ3Tmax1);
-    pDevice->TimerSQ3Tmax1.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax1.data = (unsigned long) pDevice;
     pDevice->TimerSQ3Tmax1.function = (TimerFunction)TimerSQ3CallBack;
     pDevice->TimerSQ3Tmax1.expires = RUN_AT(HZ);
 
     init_timer(&pDevice->TimerSQ3Tmax2);
-    pDevice->TimerSQ3Tmax2.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax2.data = (unsigned long) pDevice;
     pDevice->TimerSQ3Tmax2.function = (TimerFunction)TimerSQ3CallBack;
     pDevice->TimerSQ3Tmax2.expires = RUN_AT(HZ);
 
     init_timer(&pDevice->TimerSQ3Tmax3);
-    pDevice->TimerSQ3Tmax3.data = (ULONG)pDevice;
+    pDevice->TimerSQ3Tmax3.data = (unsigned long) pDevice;
     pDevice->TimerSQ3Tmax3.function = (TimerFunction)TimerState1CallBack;
     pDevice->TimerSQ3Tmax3.expires = RUN_AT(HZ);
 
@@ -868,13 +870,13 @@ static void device_init_diversity_timer(PSDevice pDevice) {
 }
 
 
-static BOOL device_release_WPADEV(PSDevice pDevice)
+static bool device_release_WPADEV(PSDevice pDevice)
 {
   viawget_wpa_header *wpahdr;
   int ii=0;
  // wait_queue_head_t	Set_wait;
   //send device close to wpa_supplicnat layer
-    if (pDevice->bWPADEVUp==TRUE) {
+    if (pDevice->bWPADEVUp==true) {
                  wpahdr = (viawget_wpa_header *)pDevice->skb->data;
                  wpahdr->type = VIAWGET_DEVICECLOSE_MSG;
                  wpahdr->resp_ie_len = 0;
@@ -891,7 +893,7 @@ static BOOL device_release_WPADEV(PSDevice pDevice)
  //wait release WPADEV
               //    init_waitqueue_head(&Set_wait);
               //    wait_event_timeout(Set_wait, ((pDevice->wpadev==NULL)&&(pDevice->skb == NULL)),5*HZ);    //1s wait
-              while((pDevice->bWPADEVUp==TRUE)) {
+              while((pDevice->bWPADEVUp==true)) {
 	        set_current_state(TASK_UNINTERRUPTIBLE);
                  schedule_timeout (HZ/20);          //wait 50ms
                  ii++;
@@ -899,7 +901,7 @@ static BOOL device_release_WPADEV(PSDevice pDevice)
 		  break;
               }
            };
-    return TRUE;
+    return true;
 }
 
 
@@ -914,10 +916,10 @@ static const struct net_device_ops device_netdev_ops = {
 
 
 
-static int
-device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
+static int __devinit
+vt6655_probe(struct pci_dev *pcid, const struct pci_device_id *ent)
 {
-    static BOOL bFirst = TRUE;
+    static bool bFirst = true;
     struct net_device*  dev = NULL;
     PCHIP_INFO  pChip_info = (PCHIP_INFO)ent->driver_data;
     PSDevice    pDevice;
@@ -944,10 +946,10 @@ device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
     if (bFirst) {
         printk(KERN_NOTICE "%s Ver. %s\n",DEVICE_FULL_DRV_NAM, DEVICE_VERSION);
         printk(KERN_NOTICE "Copyright (c) 2003 VIA Networking Technologies, Inc.\n");
-        bFirst=FALSE;
+        bFirst=false;
     }
 
-    if (!device_init_info(pcid, &pDevice, pChip_info)) {
+    if (!vt6655_init_info(pcid, &pDevice, pChip_info)) {
         return -ENOMEM;
     }
     pDevice->dev = dev;
@@ -962,7 +964,7 @@ device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 #ifdef	DEBUG
 	printk("Before get pci_info memaddr is %x\n",pDevice->memaddr);
 #endif
-    if (device_get_pci_info(pDevice,pcid) == FALSE) {
+    if (device_get_pci_info(pDevice,pcid) == false) {
         printk(KERN_ERR DEVICE_NAME ": Failed to find PCI device.\n");
         device_free_info(pDevice);
         return -ENODEV;
@@ -976,7 +978,7 @@ device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 	printk("after get pci_info memaddr is %x, io addr is %x,io_size is %d\n",pDevice->memaddr,pDevice->ioaddr,pDevice->io_size);
 	{
 		int i;
-		U32			bar,len;
+		u32			bar,len;
 		u32 address[] = {
 		PCI_BASE_ADDRESS_0,
 		PCI_BASE_ADDRESS_1,
@@ -1020,8 +1022,8 @@ device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 #ifdef	DEBUG
 	//return  0  ;
 #endif
-    pDevice->PortOffset = (DWORD)ioremap(pDevice->memaddr & PCI_BASE_ADDRESS_MEM_MASK, pDevice->io_size);
-	//pDevice->PortOffset = (DWORD)ioremap(pDevice->ioaddr & PCI_BASE_ADDRESS_IO_MASK, pDevice->io_size);
+    pDevice->PortOffset = (unsigned long)ioremap(pDevice->memaddr & PCI_BASE_ADDRESS_MEM_MASK, pDevice->io_size);
+	//pDevice->PortOffset = (unsigned long)ioremap(pDevice->ioaddr & PCI_BASE_ADDRESS_IO_MASK, pDevice->io_size);
 
 	if(pDevice->PortOffset == 0) {
        printk(KERN_ERR DEVICE_NAME ": Failed to IO remapping ..\n");
@@ -1041,7 +1043,7 @@ device_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 
     dev->base_addr = pDevice->ioaddr;
 #ifdef	PLICE_DEBUG
-	BYTE	value;
+	unsigned char 	value;
 
 	VNSvInPortB(pDevice->PortOffset+0x4F, &value);
 	printk("Before write: value is %x\n",value);
@@ -1111,16 +1113,17 @@ static void device_print_info(PSDevice pDevice)
     DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: %s\n",dev->name, get_chip_name(pDevice->chip_id));
     DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: MAC=%pM", dev->name, dev->dev_addr);
 #ifdef IO_MAP
-    DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx  ",(ULONG) pDevice->ioaddr);
+    DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx  ",(unsigned long) pDevice->ioaddr);
     DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IRQ=%d \n", pDevice->dev->irq);
 #else
-    DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx Mem=0x%lx ",(ULONG) pDevice->ioaddr,(ULONG) pDevice->PortOffset);
+    DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IO=0x%lx Mem=0x%lx ",
+		    (unsigned long) pDevice->ioaddr,(unsigned long) pDevice->PortOffset);
     DBG_PRT(MSG_LEVEL_INFO, KERN_INFO" IRQ=%d \n", pDevice->dev->irq);
 #endif
 
 }
 
-static BOOL device_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
+static bool __devinit vt6655_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
     PCHIP_INFO pChip_info) {
 
     PSDevice p;
@@ -1145,19 +1148,19 @@ static BOOL device_init_info(struct pci_dev* pcid, PSDevice* ppDevice,
 
     spin_lock_init(&((*ppDevice)->lock));
 
-    return TRUE;
+    return true;
 }
 
-static BOOL device_get_pci_info(PSDevice pDevice, struct pci_dev* pcid) {
+static bool device_get_pci_info(PSDevice pDevice, struct pci_dev* pcid) {
 
-    U16 pci_cmd;
-    U8  b;
-    UINT cis_addr;
+    u16 pci_cmd;
+    u8  b;
+    unsigned int cis_addr;
 #ifdef	PLICE_DEBUG
-	BYTE       pci_config[256];
-	BYTE	value =0x00;
+	unsigned char pci_config[256];
+	unsigned char 	value =0x00;
 	int		ii,j;
-	U16	max_lat=0x0000;
+	u16	max_lat=0x0000;
 	memset(pci_config,0x00,256);
 #endif
 
@@ -1211,7 +1214,7 @@ static BOOL device_get_pci_info(PSDevice pDevice, struct pci_dev* pcid) {
 		}
 	}
 #endif
-    return TRUE;
+    return true;
 }
 
 static void device_free_info(PSDevice pDevice) {
@@ -1263,7 +1266,7 @@ device_release_WPADEV(pDevice);
     }
 }
 
-static BOOL device_init_rings(PSDevice pDevice) {
+static bool device_init_rings(PSDevice pDevice) {
     void*   vir_pool;
 
 
@@ -1277,7 +1280,7 @@ static BOOL device_init_rings(PSDevice pDevice) {
 
     if (vir_pool == NULL) {
         DBG_PRT(MSG_LEVEL_ERR,KERN_ERR "%s : allocate desc dma memory failed\n", pDevice->dev->name);
-        return FALSE;
+        return false;
     }
 
     memset(vir_pool, 0,
@@ -1312,7 +1315,7 @@ static BOOL device_init_rings(PSDevice pDevice) {
             pDevice->sOpts.nTxDescs[1] * sizeof(STxDesc),
             vir_pool, pDevice->pool_dma
             );
-        return FALSE;
+        return false;
     }
 
     memset(pDevice->tx0_bufs, 0,
@@ -1358,7 +1361,7 @@ static BOOL device_init_rings(PSDevice pDevice) {
             pDevice->sOpts.nTxDescs[1] * PKT_BUF_SZ;
 
 
-    return TRUE;
+    return true;
 }
 
 static void device_free_rings(PSDevice pDevice) {
@@ -1593,7 +1596,7 @@ static void device_free_td1_ring(PSDevice pDevice) {
 
 /*-----------------------------------------------------------------*/
 
-static int device_rx_srv(PSDevice pDevice, UINT uIdx) {
+static int device_rx_srv(PSDevice pDevice, unsigned int uIdx) {
     PSRxDesc    pRD;
     int works = 0;
 
@@ -1621,7 +1624,7 @@ static int device_rx_srv(PSDevice pDevice, UINT uIdx) {
 }
 
 
-static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
+static bool device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
 
     PDEVICE_RD_INFO pRDInfo=pRD->pRDInfo;
 
@@ -1631,7 +1634,7 @@ static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
 	//printk("device_alloc_rx_buf:skb is %x\n",pRDInfo->skb);
 #endif
     if (pRDInfo->skb==NULL)
-        return FALSE;
+        return false;
     ASSERT(pRDInfo->skb);
     pRDInfo->skb->dev = pDevice->dev;
     pRDInfo->skb_dma = pci_map_single(pDevice->pcid, skb_tail_pointer(pRDInfo->skb),
@@ -1643,35 +1646,35 @@ static BOOL device_alloc_rx_buf(PSDevice pDevice, PSRxDesc pRD) {
     pRD->m_rd1RD1.wReqCount = cpu_to_le16(pDevice->rx_buf_sz);
     pRD->buff_addr = cpu_to_le32(pRDInfo->skb_dma);
 
-    return TRUE;
+    return true;
 }
 
 
 
-BOOL device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF) {
+bool device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF) {
 
     pDeF->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
     if (pDeF->skb == NULL)
-        return FALSE;
+        return false;
     ASSERT(pDeF->skb);
     pDeF->skb->dev = pDevice->dev;
 
-    return TRUE;
+    return true;
 }
 
 
 
-static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
+static int device_tx_srv(PSDevice pDevice, unsigned int uIdx) {
     PSTxDesc                 pTD;
-    BOOL                     bFull=FALSE;
+    bool bFull=false;
     int                      works = 0;
-    BYTE                     byTsr0;
-    BYTE                     byTsr1;
-    UINT                     uFrameSize, uFIFOHeaderSize;
+    unsigned char byTsr0;
+    unsigned char byTsr1;
+    unsigned int	uFrameSize, uFIFOHeaderSize;
     PSTxBufHead              pTxBufHead;
     struct net_device_stats* pStats = &pDevice->stats;
     struct sk_buff*          skb;
-    UINT                     uNodeIndex;
+    unsigned int	uNodeIndex;
     PSMgmtObject             pMgmt = pDevice->pMgmt;
 
 
@@ -1697,20 +1700,20 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
 
                 STAvUpdateTDStatCounter(&pDevice->scStatistic,
                         byTsr0, byTsr1,
-                        (PBYTE)(pTD->pTDInfo->buf + uFIFOHeaderSize),
+                        (unsigned char *)(pTD->pTDInfo->buf + uFIFOHeaderSize),
                         uFrameSize, uIdx);
 
 
                 BSSvUpdateNodeTxCounter(pDevice,
                          byTsr0, byTsr1,
-                         (PBYTE)(pTD->pTDInfo->buf),
+                         (unsigned char *)(pTD->pTDInfo->buf),
                          uFIFOHeaderSize
                          );
 
                 if ( !(byTsr1 & TSR1_TERR)) {
                     if (byTsr0 != 0) {
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] OK but has error. tsr1[%02X] tsr0[%02X].\n",
-                           (INT)uIdx, byTsr1, byTsr0);
+                           (int)uIdx, byTsr1, byTsr0);
                     }
                     if ((pTxBufHead->wFragCtl & FRAGCTL_ENDFRAG) != FRAGCTL_NONFRAG) {
                         pDevice->s802_11Counter.TransmittedFragmentCount ++;
@@ -1720,7 +1723,7 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
                 }
                 else {
                      DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] dropped & tsr1[%02X] tsr0[%02X].\n",
-                           (INT)uIdx, byTsr1, byTsr0);
+                           (int)uIdx, byTsr1, byTsr0);
                     pStats->tx_errors++;
                     pStats->tx_dropped++;
                 }
@@ -1742,19 +1745,19 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
             if (byTsr1 & TSR1_TERR) {
             if ((pTD->pTDInfo->byFlags & TD_FLAGS_PRIV_SKB) != 0) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] fail has error. tsr1[%02X] tsr0[%02X].\n",
-                          (INT)uIdx, byTsr1, byTsr0);
+                          (int)uIdx, byTsr1, byTsr0);
             }
 
 //                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Tx[%d] fail has error. tsr1[%02X] tsr0[%02X].\n",
-//                          (INT)uIdx, byTsr1, byTsr0);
+//                          (int)uIdx, byTsr1, byTsr0);
 
                 if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) &&
                     (pTD->pTDInfo->byFlags & TD_FLAGS_NETIF_SKB)) {
-                    WORD    wAID;
-                    BYTE    byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+                    unsigned short wAID;
+                    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
 
                     skb = pTD->pTDInfo->skb;
-                    if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data), &uNodeIndex)) {
+                    if (BSSDBbIsSTAInNodeDB(pMgmt, (unsigned char *)(skb->data), &uNodeIndex)) {
                         if (pMgmt->sNodeDBTable[uNodeIndex].bPSEnable) {
                             skb_queue_tail(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue, skb);
                             pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt++;
@@ -1763,7 +1766,7 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
                             pMgmt->abyPSTxMap[wAID >> 3] |=  byMask[wAID & 7];
                             pTD->pTDInfo->byFlags &= ~(TD_FLAGS_NETIF_SKB);
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "tx_srv:tx fail re-queue sta index= %d, QueCnt= %d\n"
-                                    ,(INT)uNodeIndex, pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt);
+                                    ,(int)uNodeIndex, pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt);
                             pStats->tx_errors--;
                             pStats->tx_dropped--;
                         }
@@ -1780,10 +1783,10 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
         // RESERV_AC0DMA reserved for relay
 
         if (AVAIL_TD(pDevice, uIdx) < RESERV_AC0DMA) {
-            bFull = TRUE;
+            bFull = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " AC0DMA is Full = %d\n", pDevice->iTDUsed[uIdx]);
         }
-        if (netif_queue_stopped(pDevice->dev) && (bFull==FALSE)){
+        if (netif_queue_stopped(pDevice->dev) && (bFull==false)){
             netif_wake_queue(pDevice->dev);
         }
     }
@@ -1795,7 +1798,7 @@ static int device_tx_srv(PSDevice pDevice, UINT uIdx) {
 }
 
 
-static void device_error(PSDevice pDevice, WORD status) {
+static void device_error(PSDevice pDevice, unsigned short status) {
 
     if (status & ISR_FETALERR) {
         DBG_PRT(MSG_LEVEL_ERR, KERN_ERR
@@ -1804,7 +1807,7 @@ static void device_error(PSDevice pDevice, WORD status) {
         netif_stop_queue(pDevice->dev);
         del_timer(&pDevice->sTimerCommand);
         del_timer(&(pDevice->pMgmt->sTimerSecondCallback));
-        pDevice->bCmdRunning = FALSE;
+        pDevice->bCmdRunning = false;
         MACbShutdown(pDevice->PortOffset);
         return;
     }
@@ -1844,7 +1847,7 @@ void	InitRxManagementQueue(PSDevice  pDevice)
 
 
 //PLICE_DEBUG ->
-INT MlmeThread(
+int MlmeThread(
      void * Context)
 {
 	PSDevice	pDevice =  (PSDevice) Context;
@@ -1914,8 +1917,8 @@ static int  device_open(struct net_device *dev) {
      wpa_Result.proto = 0;
      wpa_Result.key_mgmt = 0;
      wpa_Result.eap_type = 0;
-     wpa_Result.authenticated = FALSE;
-     pDevice->fWPA_Authened = FALSE;
+     wpa_Result.authenticated = false;
+     pDevice->fWPA_Authened = false;
 #endif
 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call device init rd0 ring\n");
 device_init_rd0_ring(pDevice);
@@ -1980,20 +1983,20 @@ DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "call device_init_registers\n");
 
 	#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 	/*
-     pDevice->bwextstep0 = FALSE;
-     pDevice->bwextstep1 = FALSE;
-     pDevice->bwextstep2 = FALSE;
-     pDevice->bwextstep3 = FALSE;
+     pDevice->bwextstep0 = false;
+     pDevice->bwextstep1 = false;
+     pDevice->bwextstep2 = false;
+     pDevice->bwextstep3 = false;
      */
        pDevice->bwextcount=0;
-     pDevice->bWPASuppWextEnabled = FALSE;
+     pDevice->bWPASuppWextEnabled = false;
 #endif
     pDevice->byReAssocCount = 0;
-   pDevice->bWPADEVUp = FALSE;
+   pDevice->bWPADEVUp = false;
     // Patch: if WEP key already set by iwconfig but device not yet open
-    if ((pDevice->bEncryptionEnable == TRUE) && (pDevice->bTransmitKey == TRUE)) {
+    if ((pDevice->bEncryptionEnable == true) && (pDevice->bTransmitKey == true)) {
         KeybSetDefaultKey(&(pDevice->sKey),
-                            (DWORD)(pDevice->byKeyIndex | (1 << 31)),
+                            (unsigned long)(pDevice->byKeyIndex | (1 << 31)),
                             pDevice->uKeyLength,
                             NULL,
                             pDevice->abyKey,
@@ -2052,12 +2055,12 @@ static int  device_close(struct net_device *dev) {
 	tasklet_kill(&pDevice->RxMngWorkItem);
 #endif
      netif_stop_queue(dev);
-    pDevice->bCmdRunning = FALSE;
+    pDevice->bCmdRunning = false;
     MACbShutdown(pDevice->PortOffset);
     MACbSoftwareReset(pDevice->PortOffset);
     CARDbRadioPowerOff(pDevice);
 
-    pDevice->bLinkPass = FALSE;
+    pDevice->bLinkPass = false;
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     device_free_td0_ring(pDevice);
@@ -2082,8 +2085,8 @@ device_release_WPADEV(pDevice);
 
 static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev) {
     PSDevice        pDevice=netdev_priv(dev);
-    PBYTE           pbMPDU;
-    UINT            cbMPDULen = 0;
+    unsigned char *pbMPDU;
+    unsigned int cbMPDULen = 0;
 
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_tx_80211\n");
@@ -2096,7 +2099,7 @@ static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev) {
         return 0;
     }
 
-    if (pDevice->bStopTx0Pkt == TRUE) {
+    if (pDevice->bStopTx0Pkt == true) {
         dev_kfree_skb_irq(skb);
         spin_unlock_irq(&pDevice->lock);
         return 0;
@@ -2115,36 +2118,36 @@ static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev) {
 
 
 
-BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
+bool device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, unsigned int uNodeIndex) {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSTxDesc        pHeadTD, pLastTD;
-    UINT            cbFrameBodySize;
-    UINT            uMACfragNum;
-    BYTE            byPktType;
-    BOOL            bNeedEncryption = FALSE;
+    unsigned int cbFrameBodySize;
+    unsigned int uMACfragNum;
+    unsigned char byPktType;
+    bool bNeedEncryption = false;
     PSKeyItem       pTransmitKey = NULL;
-    UINT            cbHeaderSize;
-    UINT            ii;
+    unsigned int cbHeaderSize;
+    unsigned int ii;
     SKeyItem        STempKey;
-//    BYTE            byKeyIndex = 0;
+//    unsigned char byKeyIndex = 0;
 
 
-    if (pDevice->bStopTx0Pkt == TRUE) {
+    if (pDevice->bStopTx0Pkt == true) {
         dev_kfree_skb_irq(skb);
-        return FALSE;
+        return false;
     };
 
     if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 0) {
         dev_kfree_skb_irq(skb);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_xmit, td0 <=0\n");
-        return FALSE;
+        return false;
     }
 
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
         if (pDevice->uAssocCount == 0) {
             dev_kfree_skb_irq(skb);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_xmit, assocCount = 0\n");
-            return FALSE;
+            return false;
         }
     }
 
@@ -2152,7 +2155,7 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
 
     pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
 
-    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(skb->data), ETH_HLEN);
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (unsigned char *)(skb->data), ETH_HLEN);
     cbFrameBodySize = skb->len - ETH_HLEN;
 
     // 802.1H
@@ -2163,9 +2166,9 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
 
     if ( uMACfragNum > AVAIL_TD(pDevice, TYPE_TXDMA0)) {
         dev_kfree_skb_irq(skb);
-        return FALSE;
+        return false;
     }
-    byPktType = (BYTE)pDevice->byPacketType;
+    byPktType = (unsigned char)pDevice->byPacketType;
 
 
     if (pDevice->bFixRate) {
@@ -2173,13 +2176,13 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
             if (pDevice->uConnectionRate >= RATE_11M) {
                 pDevice->wCurrentRate = RATE_11M;
             } else {
-                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
             }
         } else {
             if (pDevice->uConnectionRate >= RATE_54M)
                 pDevice->wCurrentRate = RATE_54M;
             else
-                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
         }
     }
     else {
@@ -2202,15 +2205,15 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
     } else if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
         byPktType = PK_TYPE_11A;
     } else {
-        if (pDevice->bProtectMode == TRUE) {
+        if (pDevice->bProtectMode == true) {
             byPktType = PK_TYPE_11GB;
         } else {
             byPktType = PK_TYPE_11GA;
         }
     }
 
-    if (pDevice->bEncryptionEnable == TRUE)
-        bNeedEncryption = TRUE;
+    if (pDevice->bEncryptionEnable == true)
+        bNeedEncryption = true;
 
     if (pDevice->bEnableHostWEP) {
         pTransmitKey = &STempKey;
@@ -2226,7 +2229,7 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
     }
     vGenerateFIFOHeader(pDevice, byPktType, pDevice->pbyTmpBuff, bNeedEncryption,
                         cbFrameBodySize, TYPE_TXDMA0, pHeadTD,
-                        &pDevice->sTxEthHeader, (PBYTE)skb->data, pTransmitKey, uNodeIndex,
+                        &pDevice->sTxEthHeader, (unsigned char *)skb->data, pTransmitKey, uNodeIndex,
                         &uMACfragNum,
                         &cbHeaderSize
                         );
@@ -2236,7 +2239,7 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
         MACbPSWakeup(pDevice->PortOffset);
     }
 
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
 
     pLastTD = pHeadTD;
     for (ii = 0; ii < uMACfragNum; ii++) {
@@ -2260,7 +2263,7 @@ BOOL device_dma0_xmit(PSDevice pDevice, struct sk_buff *skb, UINT uNodeIndex) {
     MACvTransmit0(pDevice->PortOffset);
 
 
-    return TRUE;
+    return true;
 }
 
 //TYPE_AC0DMA data tx
@@ -2269,26 +2272,26 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
 
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSTxDesc        pHeadTD, pLastTD;
-    UINT            uNodeIndex = 0;
-    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
-    WORD            wAID;
-    UINT            uMACfragNum = 1;
-    UINT            cbFrameBodySize;
-    BYTE            byPktType;
-    UINT            cbHeaderSize;
-    BOOL            bNeedEncryption = FALSE;
+    unsigned int uNodeIndex = 0;
+    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    unsigned short wAID;
+    unsigned int uMACfragNum = 1;
+    unsigned int cbFrameBodySize;
+    unsigned char byPktType;
+    unsigned int cbHeaderSize;
+    bool bNeedEncryption = false;
     PSKeyItem       pTransmitKey = NULL;
     SKeyItem        STempKey;
-    UINT            ii;
-    BOOL            bTKIP_UseGTK = FALSE;
-    BOOL            bNeedDeAuth = FALSE;
-    PBYTE           pbyBSSID;
-    BOOL            bNodeExist = FALSE;
+    unsigned int ii;
+    bool bTKIP_UseGTK = false;
+    bool bNeedDeAuth = false;
+    unsigned char *pbyBSSID;
+    bool bNodeExist = false;
 
 
 
     spin_lock_irq(&pDevice->lock);
-    if (pDevice->bLinkPass == FALSE) {
+    if (pDevice->bLinkPass == false) {
         dev_kfree_skb_irq(skb);
         spin_unlock_irq(&pDevice->lock);
         return 0;
@@ -2307,9 +2310,9 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
             spin_unlock_irq(&pDevice->lock);
             return 0;
         }
-        if (IS_MULTICAST_ADDRESS((PBYTE)(skb->data))) {
+        if (is_multicast_ether_addr((unsigned char *)(skb->data))) {
             uNodeIndex = 0;
-            bNodeExist = TRUE;
+            bNodeExist = true;
             if (pMgmt->sNodeDBTable[0].bPSEnable) {
                 skb_queue_tail(&(pMgmt->sNodeDBTable[0].sTxPSQueue), skb);
                 pMgmt->sNodeDBTable[0].wEnQueueCnt++;
@@ -2319,7 +2322,7 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
                 return 0;
             }
 }else {
-            if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data), &uNodeIndex)) {
+            if (BSSDBbIsSTAInNodeDB(pMgmt, (unsigned char *)(skb->data), &uNodeIndex)) {
                 if (pMgmt->sNodeDBTable[uNodeIndex].bPSEnable) {
                     skb_queue_tail(&pMgmt->sNodeDBTable[uNodeIndex].sTxPSQueue, skb);
                     pMgmt->sNodeDBTable[uNodeIndex].wEnQueueCnt++;
@@ -2338,12 +2341,12 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
                 }else {
                     pDevice->byPreambleType = PREAMBLE_LONG;
                 }
-                bNodeExist = TRUE;
+                bNodeExist = true;
 
             }
         }
 
-        if (bNodeExist == FALSE) {
+        if (bNodeExist == false) {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Unknown STA not found in node DB \n");
             dev_kfree_skb_irq(skb);
             spin_unlock_irq(&pDevice->lock);
@@ -2356,7 +2359,7 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
     pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
 
 
-    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)(skb->data), ETH_HLEN);
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (unsigned char *)(skb->data), ETH_HLEN);
     cbFrameBodySize = skb->len - ETH_HLEN;
     // 802.1H
     if (ntohs(pDevice->sTxEthHeader.wType) > ETH_DATA_LEN) {
@@ -2364,18 +2367,18 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
     }
 
 
-    if (pDevice->bEncryptionEnable == TRUE) {
-        bNeedEncryption = TRUE;
+    if (pDevice->bEncryptionEnable == true) {
+        bNeedEncryption = true;
         // get Transmit key
         do {
             if ((pDevice->pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
                 (pDevice->pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
                 pbyBSSID = pDevice->abyBSSID;
                 // get pairwise key
-                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == FALSE) {
+                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == false) {
                     // get group key
-                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == TRUE) {
-                        bTKIP_UseGTK = TRUE;
+                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == true) {
+                        bTKIP_UseGTK = true;
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get GTK.\n");
                         break;
                     }
@@ -2392,12 +2395,12 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"\n");
 
                 // get pairwise key
-                if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == TRUE)
+                if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == true)
                     break;
             }
             // get group key
             pbyBSSID = pDevice->abyBroadcastAddr;
-            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == false) {
                 pTransmitKey = NULL;
                 if (pDevice->pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"IBSS and KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
@@ -2405,15 +2408,15 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
                 else
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"NOT IBSS and KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
             } else {
-                bTKIP_UseGTK = TRUE;
+                bTKIP_UseGTK = true;
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"Get GTK.\n");
             }
-        } while(FALSE);
+        } while(false);
     }
 
     if (pDevice->bEnableHostWEP) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"acdma0: STA index %d\n", uNodeIndex);
-        if (pDevice->bEncryptionEnable == TRUE) {
+        if (pDevice->bEncryptionEnable == true) {
             pTransmitKey = &STempKey;
             pTransmitKey->byCipherSuite = pMgmt->sNodeDBTable[uNodeIndex].byCipherSuite;
             pTransmitKey->dwKeyIndex = pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex;
@@ -2443,7 +2446,7 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
         }
     }
 
-    byPktType = (BYTE)pDevice->byPacketType;
+    byPktType = (unsigned char)pDevice->byPacketType;
 
     if (pDevice->bFixRate) {
 #ifdef	PLICE_DEBUG
@@ -2454,7 +2457,7 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
             if (pDevice->uConnectionRate >= RATE_11M) {
                 pDevice->wCurrentRate = RATE_11M;
             } else {
-                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
             }
         } else {
             if ((pDevice->eCurrentPHYType == PHY_TYPE_11A) &&
@@ -2464,11 +2467,11 @@ static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
                 if (pDevice->uConnectionRate >= RATE_54M)
                     pDevice->wCurrentRate = RATE_54M;
                 else
-                    pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                    pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
 
             }
         }
-        pDevice->byACKRate = (BYTE) pDevice->wCurrentRate;
+        pDevice->byACKRate = (unsigned char) pDevice->wCurrentRate;
         pDevice->byTopCCKBasicRate = RATE_1M;
         pDevice->byTopOFDMBasicRate = RATE_6M;
     }
@@ -2521,7 +2524,7 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
     } else if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
         byPktType = PK_TYPE_11A;
     } else {
-        if (pDevice->bProtectMode == TRUE) {
+        if (pDevice->bProtectMode == true) {
             byPktType = PK_TYPE_11GB;
         } else {
             byPktType = PK_TYPE_11GA;
@@ -2532,28 +2535,28 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
 //	printk("FIX RATE:CurrentRate is %d");
 //#endif
 
-    if (bNeedEncryption == TRUE) {
+    if (bNeedEncryption == true) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
         if ((pDevice->sTxEthHeader.wType) == TYPE_PKT_802_1x) {
-            bNeedEncryption = FALSE;
+            bNeedEncryption = false;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
             if ((pDevice->pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pDevice->pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
                 if (pTransmitKey == NULL) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Don't Find TX KEY\n");
                 }
                 else {
-                    if (bTKIP_UseGTK == TRUE) {
+                    if (bTKIP_UseGTK == true) {
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"error: KEY is GTK!!~~\n");
                     }
                     else {
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
-                        bNeedEncryption = TRUE;
+                        bNeedEncryption = true;
                     }
                 }
             }
 
             if (pDevice->byCntMeasure == 2) {
-                bNeedDeAuth = TRUE;
+                bNeedDeAuth = true;
                 pDevice->s802_11Counter.TKIPCounterMeasuresInvoked++;
             }
 
@@ -2561,7 +2564,7 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
                 if ((uNodeIndex != 0) &&
                     (pMgmt->sNodeDBTable[uNodeIndex].dwKeyIndex & PAIRWISE_KEY)) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Find PTK [%lX]\n", pTransmitKey->dwKeyIndex);
-                    bNeedEncryption = TRUE;
+                    bNeedEncryption = true;
                  }
              }
         }
@@ -2584,7 +2587,7 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
 #endif
     vGenerateFIFOHeader(pDevice, byPktType, pDevice->pbyTmpBuff, bNeedEncryption,
                         cbFrameBodySize, TYPE_AC0DMA, pHeadTD,
-                        &pDevice->sTxEthHeader, (PBYTE)skb->data, pTransmitKey, uNodeIndex,
+                        &pDevice->sTxEthHeader, (unsigned char *)skb->data, pTransmitKey, uNodeIndex,
                         &uMACfragNum,
                         &cbHeaderSize
                         );
@@ -2593,7 +2596,7 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
         // Disable PS
         MACbPSWakeup(pDevice->PortOffset);
     }
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
 
     pLastTD = pHeadTD;
     for (ii = 0; ii < uMACfragNum; ii++) {
@@ -2631,11 +2634,11 @@ pDevice->byTopCCKBasicRate,pDevice->byTopOFDMBasicRate);
 //#endif
 
 {
-    BYTE  Protocol_Version;    //802.1x Authentication
-    BYTE  Packet_Type;           //802.1x Authentication
-    BYTE  Descriptor_type;
-    WORD Key_info;
-BOOL            bTxeapol_key = FALSE;
+    unsigned char Protocol_Version;    //802.1x Authentication
+    unsigned char Packet_Type;           //802.1x Authentication
+    unsigned char Descriptor_type;
+    unsigned short Key_info;
+bool bTxeapol_key = false;
     Protocol_Version = skb->data[ETH_HLEN];
     Packet_Type = skb->data[ETH_HLEN+1];
     Descriptor_type = skb->data[ETH_HLEN+1+1+2];
@@ -2643,11 +2646,11 @@ BOOL            bTxeapol_key = FALSE;
    if (pDevice->sTxEthHeader.wType == TYPE_PKT_802_1x) {
            if(((Protocol_Version==1) ||(Protocol_Version==2)) &&
 	        (Packet_Type==3)) {  //802.1x OR eapol-key challenge frame transfer
-                        bTxeapol_key = TRUE;
+                        bTxeapol_key = true;
 		if((Descriptor_type==254)||(Descriptor_type==2)) {       //WPA or RSN
                        if(!(Key_info & BIT3) &&   //group-key challenge
 			   (Key_info & BIT8) && (Key_info & BIT9)) {    //send 2/2 key
-			  pDevice->fWPA_Authened = TRUE;
+			  pDevice->fWPA_Authened = true;
 			  if(Descriptor_type==254)
 			      printk("WPA ");
 			  else
@@ -2674,13 +2677,13 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
     PSDevice     pDevice=(PSDevice) netdev_priv(dev);
 
     int             max_count=0;
-    DWORD           dwMIBCounter=0;
+    unsigned long dwMIBCounter=0;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    BYTE            byOrgPageSel=0;
+    unsigned char byOrgPageSel=0;
     int             handled = 0;
-    BYTE            byData = 0;
+    unsigned char byData = 0;
     int             ii= 0;
-//    BYTE            byRSSI;
+//    unsigned char byRSSI;
 
 
     MACvReadISR(pDevice->PortOffset, &pDevice->dwIsr);
@@ -2697,7 +2700,7 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
 
     	if ((pDevice->dwIsr & ISR_RXDMA0) &&
         (pDevice->byLocalID != REV_ID_VT3253_B0) &&
-        (pDevice->bBSSIDFilter == TRUE)) {
+        (pDevice->bBSSIDFilter == true)) {
         // update RSSI
         //BBbReadEmbeded(pDevice->PortOffset, 0x3E, &byRSSI);
         //pDevice->uCurrRSSI = byRSSI;
@@ -2746,9 +2749,9 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
                 VNSvInPortD(pDevice->PortOffset + MAC_REG_MAR4, &(pDevice->dwOrgMAR4));
                 MACvSelectPage0(pDevice->PortOffset);
                //xxxx
-               // WCMDbFlushCommandQueue(pDevice->pMgmt, TRUE);
-                if (CARDbSetChannel(pDevice, pDevice->pCurrMeasureEID->sReq.byChannel) == TRUE) {
-                    pDevice->bMeasureInProgress = TRUE;
+               // WCMDbFlushCommandQueue(pDevice->pMgmt, true);
+                if (set_channel(pDevice, pDevice->pCurrMeasureEID->sReq.byChannel) == true) {
+                    pDevice->bMeasureInProgress = true;
                     MACvSelectPage1(pDevice->PortOffset);
                     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_READY);
                     MACvSelectPage0(pDevice->PortOffset);
@@ -2770,7 +2773,7 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
             }
             if (pDevice->dwIsr & ISR_MEASUREEND) {
                 // 802.11h measure end
-                pDevice->bMeasureInProgress = FALSE;
+                pDevice->bMeasureInProgress = false;
                 VNSvOutPortB(pDevice->PortOffset + MAC_REG_RCR, pDevice->byOrgRCR);
                 MACvSelectPage1(pDevice->PortOffset);
                 VNSvOutPortD(pDevice->PortOffset + MAC_REG_MAR0, pDevice->dwOrgMAR0);
@@ -2782,7 +2785,7 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
                 // clear measure control
                 MACvRegBitsOff(pDevice->PortOffset, MAC_REG_MSRCTL, MSRCTL_EN);
                 MACvSelectPage0(pDevice->PortOffset);
-                CARDbSetChannel(pDevice, pDevice->byOrgChannel);
+                set_channel(pDevice, pDevice->byOrgChannel);
                 // WCMDbResetCommandQueue(pDevice->pMgmt);
                 MACvSelectPage1(pDevice->PortOffset);
                 MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
@@ -2798,26 +2801,26 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
             if (pDevice->dwIsr & ISR_QUIETSTART) {
                 do {
                     ;
-                } while (CARDbStartQuiet(pDevice) == FALSE);
+                } while (CARDbStartQuiet(pDevice) == false);
             }
         }
 
         if (pDevice->dwIsr & ISR_TBTT) {
-            if (pDevice->bEnableFirstQuiet == TRUE) {
+            if (pDevice->bEnableFirstQuiet == true) {
                 pDevice->byQuietStartCount--;
                 if (pDevice->byQuietStartCount == 0) {
-                    pDevice->bEnableFirstQuiet = FALSE;
+                    pDevice->bEnableFirstQuiet = false;
                     MACvSelectPage1(pDevice->PortOffset);
                     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL, (MSRCTL_QUIETTXCHK | MSRCTL_QUIETEN));
                     MACvSelectPage0(pDevice->PortOffset);
                 }
             }
-            if ((pDevice->bChannelSwitch == TRUE) &&
+            if ((pDevice->bChannelSwitch == true) &&
                 (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE)) {
                 pDevice->byChannelSwitchCount--;
                 if (pDevice->byChannelSwitchCount == 0) {
-                    pDevice->bChannelSwitch = FALSE;
-                    CARDbSetChannel(pDevice, pDevice->byNewChannel);
+                    pDevice->bChannelSwitch = false;
+                    set_channel(pDevice, pDevice->byNewChannel);
                     VNTWIFIbChannelSwitch(pDevice->pMgmt, pDevice->byNewChannel);
                     MACvSelectPage1(pDevice->PortOffset);
                     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
@@ -2827,12 +2830,12 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
                 }
             }
             if (pDevice->eOPMode == OP_MODE_ADHOC) {
-                //pDevice->bBeaconSent = FALSE;
+                //pDevice->bBeaconSent = false;
             } else {
-                if ((pDevice->bUpdateBBVGA) && (pDevice->bLinkPass == TRUE) && (pDevice->uCurrRSSI != 0)) {
-                    LONG            ldBm;
+                if ((pDevice->bUpdateBBVGA) && (pDevice->bLinkPass == true) && (pDevice->uCurrRSSI != 0)) {
+                    long            ldBm;
 
-                    RFvRSSITodBm(pDevice, (BYTE) pDevice->uCurrRSSI, &ldBm);
+                    RFvRSSITodBm(pDevice, (unsigned char) pDevice->uCurrRSSI, &ldBm);
                     for (ii=0;ii<BB_VGA_LEVEL;ii++) {
                         if (ldBm < pDevice->ldBmThreshold[ii]) {
                             pDevice->byBBVGANew = pDevice->abyBBVGA[ii];
@@ -2858,7 +2861,7 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
                 }
             }
 
-            pDevice->bBeaconSent = FALSE;
+            pDevice->bBeaconSent = false;
             if (pDevice->bEnablePSMode) {
                 PSbIsNextTBTTWakeUp((void *)pDevice);
             };
@@ -2879,31 +2882,31 @@ static  irqreturn_t  device_intr(int irq,  void *dev_instance) {
         if (pDevice->dwIsr & ISR_BNTX) {
 
             if (pDevice->eOPMode == OP_MODE_ADHOC) {
-                pDevice->bIsBeaconBufReadySet = FALSE;
+                pDevice->bIsBeaconBufReadySet = false;
                 pDevice->cbBeaconBufReadySetCnt = 0;
             };
 
             if (pDevice->eOPMode == OP_MODE_AP) {
                 if(pMgmt->byDTIMCount > 0) {
                    pMgmt->byDTIMCount --;
-                   pMgmt->sNodeDBTable[0].bRxPSPoll = FALSE;
+                   pMgmt->sNodeDBTable[0].bRxPSPoll = false;
                 }
                 else {
                     if(pMgmt->byDTIMCount == 0) {
                         // check if mutltcast tx bufferring
                         pMgmt->byDTIMCount = pMgmt->byDTIMPeriod - 1;
-                        pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
+                        pMgmt->sNodeDBTable[0].bRxPSPoll = true;
                         bScheduleCommand((void *)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
                     }
                 }
             }
-            pDevice->bBeaconSent = TRUE;
+            pDevice->bBeaconSent = true;
 
-            if (pDevice->bChannelSwitch == TRUE) {
+            if (pDevice->bChannelSwitch == true) {
                 pDevice->byChannelSwitchCount--;
                 if (pDevice->byChannelSwitchCount == 0) {
-                    pDevice->bChannelSwitch = FALSE;
-                    CARDbSetChannel(pDevice, pDevice->byNewChannel);
+                    pDevice->bChannelSwitch = false;
+                    set_channel(pDevice, pDevice->byNewChannel);
                     VNTWIFIbChannelSwitch(pDevice->pMgmt, pDevice->byNewChannel);
                     MACvSelectPage1(pDevice->PortOffset);
                     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MSRCTL+1, MSRCTL1_TXPAUSE);
@@ -2978,9 +2981,10 @@ static inline u32 ether_crc(int length, unsigned char *data)
 }
 
 //2008-8-4 <add> by chester
-static int Config_FileGetParameter(UCHAR *string, UCHAR *dest,UCHAR *source)
+static int Config_FileGetParameter(unsigned char *string,
+		unsigned char *dest, unsigned char *source)
 {
-  UCHAR buf1[100];
+  unsigned char buf1[100];
   int source_len = strlen(source);
 
     memset(buf1,0,100);
@@ -2989,13 +2993,13 @@ static int Config_FileGetParameter(UCHAR *string, UCHAR *dest,UCHAR *source)
     source+=strlen(buf1);
 
    memcpy(dest,source,source_len-strlen(buf1));
- return TRUE;
+ return true;
 }
 
-int Config_FileOperation(PSDevice pDevice,BOOL fwrite,unsigned char *Parameter) {
-    UCHAR    *config_path=CONFIG_PATH;
-    UCHAR    *buffer=NULL;
-    UCHAR      tmpbuffer[20];
+int Config_FileOperation(PSDevice pDevice,bool fwrite,unsigned char *Parameter) {
+    unsigned char *config_path = CONFIG_PATH;
+    unsigned char *buffer = NULL;
+    unsigned char tmpbuffer[20];
     struct file   *filp=NULL;
     mm_segment_t old_fs = get_fs();
     //int oldfsuid=0,oldfsgid=0;
@@ -3038,7 +3042,7 @@ if(filp->f_op->read(filp, buffer, 1024, &filp->f_pos)<0) {
  goto error1;
 }
 
-if(Config_FileGetParameter("ZONETYPE",tmpbuffer,buffer)!=TRUE) {
+if(Config_FileGetParameter("ZONETYPE",tmpbuffer,buffer)!=true) {
   printk("get parameter error?\n");
   result = -1;
   goto error1;
@@ -3555,19 +3559,19 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
        else {
            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Commit the settings\n");
            spin_lock_irq(&pDevice->lock);
-           pDevice->bLinkPass = FALSE;
+           pDevice->bLinkPass = false;
            memset(pMgmt->abyCurrBSSID, 0, 6);
            pMgmt->eCurrState = WMAC_STATE_IDLE;
            netif_stop_queue(pDevice->dev);
 	#ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 	      pMgmt->eScanType = WMAC_SCAN_ACTIVE;
-	 if(pDevice->bWPASuppWextEnabled !=TRUE)
+	 if(pDevice->bWPASuppWextEnabled !=true)
 	 #endif
            bScheduleCommand((void *) pDevice, WLAN_CMD_BSSID_SCAN, pMgmt->abyDesireSSID);
            bScheduleCommand((void *) pDevice, WLAN_CMD_SSID, NULL);
            spin_unlock_irq(&pDevice->lock);
       }
-      pDevice->bCommit = FALSE;
+      pDevice->bCommit = false;
     }
 
     return rc;
@@ -3598,20 +3602,20 @@ static int ethtool_ioctl(struct net_device *dev, void *useraddr)
 
 /*------------------------------------------------------------------*/
 
-MODULE_DEVICE_TABLE(pci, device_id_table);
+MODULE_DEVICE_TABLE(pci, vt6655_pci_id_table);
 
 static struct pci_driver device_driver = {
         name:       DEVICE_NAME,
-        id_table:   device_id_table,
-        probe:      device_found1,
-        remove:     device_remove1,
+        id_table:   vt6655_pci_id_table,
+        probe:      vt6655_probe,
+        remove:     vt6655_remove,
 #ifdef CONFIG_PM
         suspend:    viawget_suspend,
         resume:     viawget_resume,
 #endif
 };
 
-static int __init device_init_module(void)
+static int __init vt6655_init_module(void)
 {
     int ret;
 
@@ -3627,7 +3631,7 @@ static int __init device_init_module(void)
     return ret;
 }
 
-static void __exit device_cleanup_module(void)
+static void __exit vt6655_cleanup_module(void)
 {
 
 
@@ -3638,8 +3642,8 @@ static void __exit device_cleanup_module(void)
 
 }
 
-module_init(device_init_module);
-module_exit(device_cleanup_module);
+module_init(vt6655_init_module);
+module_exit(vt6655_cleanup_module);
 
 
 #ifdef CONFIG_PM
@@ -3651,7 +3655,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
     case SYS_DOWN:
     case SYS_HALT:
     case SYS_POWER_OFF:
-        while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
+	for_each_pci_dev(pdev) {
             if(pci_dev_driver(pdev) == &device_driver) {
                 if (pci_get_drvdata(pdev))
                     viawget_suspend(pdev, PMSG_HIBERNATE);
@@ -3677,10 +3681,10 @@ viawget_suspend(struct pci_dev *pcid, pm_message_t state)
     pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
     pDevice->uCmdDequeueIdx = 0;
     pDevice->uCmdEnqueueIdx = 0;
-    pDevice->bCmdRunning = FALSE;
+    pDevice->bCmdRunning = false;
     MACbShutdown(pDevice->PortOffset);
     MACvSaveContext(pDevice->PortOffset, pDevice->abyMacContext);
-    pDevice->bLinkPass = FALSE;
+    pDevice->bLinkPass = false;
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     pci_disable_device(pcid);
@@ -3704,9 +3708,9 @@ viawget_resume(struct pci_dev *pcid)
         spin_lock_irq(&pDevice->lock);
         MACvRestoreContext(pDevice->PortOffset, pDevice->abyMacContext);
         device_init_registers(pDevice, DEVICE_INIT_DXPL);
-        if (pMgmt->sNodeDBTable[0].bActive == TRUE) { // Assoc with BSS
-            pMgmt->sNodeDBTable[0].bActive = FALSE;
-            pDevice->bLinkPass = FALSE;
+        if (pMgmt->sNodeDBTable[0].bActive == true) { // Assoc with BSS
+            pMgmt->sNodeDBTable[0].bActive = false;
+            pDevice->bLinkPass = false;
             if(pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
                 // In Adhoc, BSS state set back to started.
                 pMgmt->eCurrState = WMAC_STATE_STARTED;
diff --git a/drivers/staging/vt6655/dpc.c b/drivers/staging/vt6655/dpc.c
index 6b758a8c1af..15130733693 100644
--- a/drivers/staging/vt6655/dpc.c
+++ b/drivers/staging/vt6655/dpc.c
@@ -66,7 +66,7 @@
 //static int          msglevel                =MSG_LEVEL_DEBUG;
 static int          msglevel                =MSG_LEVEL_INFO;
 
-const BYTE acbyRxRate[MAX_RATE] =
+const unsigned char acbyRxRate[MAX_RATE] =
 {2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108};
 
 
@@ -76,70 +76,60 @@ const BYTE acbyRxRate[MAX_RATE] =
 
 /*---------------------  Static Functions  --------------------------*/
 
-static BYTE s_byGetRateIdx(BYTE byRate);
+static unsigned char s_byGetRateIdx(unsigned char byRate);
 
 
-static
-void
-s_vGetDASA(
-    PBYTE pbyRxBufferAddr,
-    PUINT pcbHeaderSize,
-    PSEthernetHeader psEthHeader
-    );
+static void
+s_vGetDASA(unsigned char *pbyRxBufferAddr, unsigned int *pcbHeaderSize,
+		PSEthernetHeader psEthHeader);
 
-static
-void
-s_vProcessRxMACHeader (
-    PSDevice pDevice,
-    PBYTE pbyRxBufferAddr,
-    UINT cbPacketSize,
-    BOOL bIsWEP,
-    BOOL bExtIV,
-    PUINT pcbHeadSize
-    );
+static void
+s_vProcessRxMACHeader(PSDevice pDevice, unsigned char *pbyRxBufferAddr,
+		unsigned int cbPacketSize, bool bIsWEP, bool bExtIV,
+		unsigned int *pcbHeadSize);
 
-static BOOL s_bAPModeRxCtl(
+static bool s_bAPModeRxCtl(
     PSDevice pDevice,
-    PBYTE    pbyFrame,
-    INT      iSANodeIndex
+    unsigned char *pbyFrame,
+    int      iSANodeIndex
     );
 
 
 
-static BOOL s_bAPModeRxData (
+static bool s_bAPModeRxData (
     PSDevice pDevice,
     struct sk_buff* skb,
-    UINT     FrameSize,
-    UINT     cbHeaderOffset,
-    INT      iSANodeIndex,
-    INT      iDANodeIndex
+    unsigned int FrameSize,
+    unsigned int cbHeaderOffset,
+    int      iSANodeIndex,
+    int      iDANodeIndex
     );
 
 
-static BOOL s_bHandleRxEncryption(
+static bool s_bHandleRxEncryption(
     PSDevice     pDevice,
-    PBYTE        pbyFrame,
-    UINT         FrameSize,
-    PBYTE        pbyRsr,
-    PBYTE       pbyNewRsr,
+    unsigned char *pbyFrame,
+    unsigned int FrameSize,
+    unsigned char *pbyRsr,
+    unsigned char *pbyNewRsr,
     PSKeyItem   *pKeyOut,
-    int *       pbExtIV,
-    PWORD       pwRxTSC15_0,
-    PDWORD      pdwRxTSC47_16
+    bool *pbExtIV,
+    unsigned short *pwRxTSC15_0,
+    unsigned long *pdwRxTSC47_16
     );
 
-static BOOL s_bHostWepRxEncryption(
+static bool s_bHostWepRxEncryption(
 
     PSDevice     pDevice,
-    PBYTE        pbyFrame,
-    UINT         FrameSize,
-    PBYTE        pbyRsr,
-    BOOL         bOnFly,
+    unsigned char *pbyFrame,
+    unsigned int FrameSize,
+    unsigned char *pbyRsr,
+    bool bOnFly,
     PSKeyItem    pKey,
-    PBYTE       pbyNewRsr,
-    int *       pbExtIV,
-    PWORD       pwRxTSC15_0,
-    PDWORD      pdwRxTSC47_16
+    unsigned char *pbyNewRsr,
+    bool *pbExtIV,
+    unsigned short *pwRxTSC15_0,
+    unsigned long *pdwRxTSC47_16
 
     );
 
@@ -162,27 +152,21 @@ static BOOL s_bHostWepRxEncryption(
  * Return Value: None
  *
 -*/
-static
-void
-s_vProcessRxMACHeader (
-    PSDevice pDevice,
-    PBYTE pbyRxBufferAddr,
-    UINT cbPacketSize,
-    BOOL bIsWEP,
-    BOOL bExtIV,
-    PUINT pcbHeadSize
-    )
+static void
+s_vProcessRxMACHeader(PSDevice pDevice, unsigned char *pbyRxBufferAddr,
+		unsigned int cbPacketSize, bool bIsWEP, bool bExtIV,
+		unsigned int *pcbHeadSize)
 {
-    PBYTE           pbyRxBuffer;
-    UINT            cbHeaderSize = 0;
-    PWORD           pwType;
+    unsigned char *pbyRxBuffer;
+    unsigned int cbHeaderSize = 0;
+    unsigned short *pwType;
     PS802_11Header  pMACHeader;
     int             ii;
 
 
     pMACHeader = (PS802_11Header) (pbyRxBufferAddr + cbHeaderSize);
 
-    s_vGetDASA((PBYTE)pMACHeader, &cbHeaderSize, &pDevice->sRxEthHeader);
+    s_vGetDASA((unsigned char *)pMACHeader, &cbHeaderSize, &pDevice->sRxEthHeader);
 
     if (bIsWEP) {
         if (bExtIV) {
@@ -197,18 +181,18 @@ s_vProcessRxMACHeader (
         cbHeaderSize += WLAN_HDR_ADDR3_LEN;
     };
 
-    pbyRxBuffer = (PBYTE) (pbyRxBufferAddr + cbHeaderSize);
-    if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
+    pbyRxBuffer = (unsigned char *) (pbyRxBufferAddr + cbHeaderSize);
+    if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
         cbHeaderSize += 6;
     }
-    else if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
+    else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
         cbHeaderSize += 6;
-        pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+        pwType = (unsigned short *) (pbyRxBufferAddr + cbHeaderSize);
         if ((*pwType!= TYPE_PKT_IPX) && (*pwType != cpu_to_le16(0xF380))) {
         }
         else {
             cbHeaderSize -= 8;
-            pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+            pwType = (unsigned short *) (pbyRxBufferAddr + cbHeaderSize);
             if (bIsWEP) {
                 if (bExtIV) {
                     *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 8);    // 8 is IV&ExtIV
@@ -223,7 +207,7 @@ s_vProcessRxMACHeader (
     }
     else {
         cbHeaderSize -= 2;
-        pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
+        pwType = (unsigned short *) (pbyRxBufferAddr + cbHeaderSize);
         if (bIsWEP) {
             if (bExtIV) {
                 *pwType = htons(cbPacketSize - WLAN_HDR_ADDR3_LEN - 8);    // 8 is IV&ExtIV
@@ -237,7 +221,7 @@ s_vProcessRxMACHeader (
     }
 
     cbHeaderSize -= (ETH_ALEN * 2);
-    pbyRxBuffer = (PBYTE) (pbyRxBufferAddr + cbHeaderSize);
+    pbyRxBuffer = (unsigned char *) (pbyRxBufferAddr + cbHeaderSize);
     for(ii=0;ii<ETH_ALEN;ii++)
         *pbyRxBuffer++ = pDevice->sRxEthHeader.abyDstAddr[ii];
     for(ii=0;ii<ETH_ALEN;ii++)
@@ -249,9 +233,9 @@ s_vProcessRxMACHeader (
 
 
 
-static BYTE s_byGetRateIdx (BYTE byRate)
+static unsigned char s_byGetRateIdx (unsigned char byRate)
 {
-    BYTE    byRateIdx;
+    unsigned char byRateIdx;
 
     for (byRateIdx = 0; byRateIdx <MAX_RATE ; byRateIdx++) {
         if (acbyRxRate[byRateIdx%MAX_RATE] == byRate)
@@ -261,15 +245,11 @@ static BYTE s_byGetRateIdx (BYTE byRate)
 }
 
 
-static
-void
-s_vGetDASA (
-    PBYTE pbyRxBufferAddr,
-    PUINT pcbHeaderSize,
-    PSEthernetHeader psEthHeader
-    )
+static void
+s_vGetDASA(unsigned char *pbyRxBufferAddr, unsigned int *pcbHeaderSize,
+	PSEthernetHeader psEthHeader)
 {
-    UINT            cbHeaderSize = 0;
+    unsigned int cbHeaderSize = 0;
     PS802_11Header  pMACHeader;
     int             ii;
 
@@ -333,7 +313,7 @@ void	MngWorkItem(void *Context)
 
 
 
-BOOL
+bool
 device_receive_frame (
     PSDevice pDevice,
     PSRxDesc pCurrRD
@@ -349,36 +329,36 @@ device_receive_frame (
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSRxMgmtPacket  pRxPacket = &(pDevice->pMgmt->sRxPacket);
     PS802_11Header  p802_11Header;
-    PBYTE           pbyRsr;
-    PBYTE           pbyNewRsr;
-    PBYTE           pbyRSSI;
+    unsigned char *pbyRsr;
+    unsigned char *pbyNewRsr;
+    unsigned char *pbyRSSI;
     PQWORD          pqwTSFTime;
-    PWORD           pwFrameSize;
-    PBYTE           pbyFrame;
-    BOOL            bDeFragRx = FALSE;
-    BOOL            bIsWEP = FALSE;
-    UINT            cbHeaderOffset;
-    UINT            FrameSize;
-    WORD            wEtherType = 0;
-    INT             iSANodeIndex = -1;
-    INT             iDANodeIndex = -1;
-    UINT            ii;
-    UINT            cbIVOffset;
-    BOOL            bExtIV = FALSE;
-    PBYTE           pbyRxSts;
-    PBYTE           pbyRxRate;
-    PBYTE           pbySQ;
-    UINT            cbHeaderSize;
+    unsigned short *pwFrameSize;
+    unsigned char *pbyFrame;
+    bool bDeFragRx = false;
+    bool bIsWEP = false;
+    unsigned int cbHeaderOffset;
+    unsigned int FrameSize;
+    unsigned short wEtherType = 0;
+    int             iSANodeIndex = -1;
+    int             iDANodeIndex = -1;
+    unsigned int ii;
+    unsigned int cbIVOffset;
+    bool bExtIV = false;
+    unsigned char *pbyRxSts;
+    unsigned char *pbyRxRate;
+    unsigned char *pbySQ;
+    unsigned int cbHeaderSize;
     PSKeyItem       pKey = NULL;
-    WORD            wRxTSC15_0 = 0;
-    DWORD           dwRxTSC47_16 = 0;
+    unsigned short wRxTSC15_0 = 0;
+    unsigned long dwRxTSC47_16 = 0;
     SKeyItem        STempKey;
     // 802.11h RPI
-    DWORD           dwDuration = 0;
-    LONG            ldBm = 0;
-    LONG            ldBmThreshold = 0;
+    unsigned long dwDuration = 0;
+    long            ldBm = 0;
+    long            ldBmThreshold = 0;
     PS802_11Header pMACHeader;
- BOOL            bRxeapol_key = FALSE;
+ bool bRxeapol_key = false;
 
 //    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- device_receive_frame---\n");
 
@@ -391,7 +371,7 @@ device_receive_frame (
                      pDevice->rx_buf_sz, PCI_DMA_FROMDEVICE);
 #endif
 //PLICE_DEBUG<-
-    pwFrameSize = (PWORD)(skb->data + 2);
+    pwFrameSize = (unsigned short *)(skb->data + 2);
     FrameSize = cpu_to_le16(pCurrRD->m_rd1RD1.wReqCount) - cpu_to_le16(pCurrRD->m_rd0RD0.wResCount);
 
     // Max: 2312Payload + 30HD +4CRC + 2Padding + 4Len + 8TSF + 4RSR
@@ -399,17 +379,17 @@ device_receive_frame (
     if ((FrameSize > 2364)||(FrameSize <= 32)) {
         // Frame Size error drop this packet.
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- WRONG Length 1 \n");
-        return FALSE;
+        return false;
     }
 
-    pbyRxSts = (PBYTE) (skb->data);
-    pbyRxRate = (PBYTE) (skb->data + 1);
-    pbyRsr = (PBYTE) (skb->data + FrameSize - 1);
-    pbyRSSI = (PBYTE) (skb->data + FrameSize - 2);
-    pbyNewRsr = (PBYTE) (skb->data + FrameSize - 3);
-    pbySQ = (PBYTE) (skb->data + FrameSize - 4);
+    pbyRxSts = (unsigned char *) (skb->data);
+    pbyRxRate = (unsigned char *) (skb->data + 1);
+    pbyRsr = (unsigned char *) (skb->data + FrameSize - 1);
+    pbyRSSI = (unsigned char *) (skb->data + FrameSize - 2);
+    pbyNewRsr = (unsigned char *) (skb->data + FrameSize - 3);
+    pbySQ = (unsigned char *) (skb->data + FrameSize - 4);
     pqwTSFTime = (PQWORD) (skb->data + FrameSize - 12);
-    pbyFrame = (PBYTE)(skb->data + 4);
+    pbyFrame = (unsigned char *)(skb->data + 4);
 
     // get packet size
     FrameSize = cpu_to_le16(*pwFrameSize);
@@ -417,7 +397,7 @@ device_receive_frame (
     if ((FrameSize > 2346)|(FrameSize < 14)) { // Max: 2312Payload + 30HD +4CRC
                                                // Min: 14 bytes ACK
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---------- WRONG Length 2 \n");
-        return FALSE;
+        return false;
     }
 //PLICE_DEBUG->
 #if 1
@@ -431,9 +411,9 @@ device_receive_frame (
 
 #endif
 
-  pMACHeader=(PS802_11Header)((PBYTE) (skb->data)+8);
+  pMACHeader=(PS802_11Header)((unsigned char *) (skb->data)+8);
 //PLICE_DEBUG<-
-	if (pDevice->bMeasureInProgress == TRUE) {
+	if (pDevice->bMeasureInProgress == true) {
         if ((*pbyRsr & RSR_CRCOK) != 0) {
             pDevice->byBasicMap |= 0x01;
         }
@@ -460,13 +440,13 @@ device_receive_frame (
             ii--;
         }
         pDevice->dwRPIs[ii] += dwDuration;
-        return FALSE;
+        return false;
     }
 
-    if (!IS_MULTICAST_ADDRESS(pbyFrame) && !IS_BROADCAST_ADDRESS(pbyFrame)) {
+    if (!is_multicast_ether_addr(pbyFrame)) {
         if (WCTLbIsDuplicate(&(pDevice->sDupRxCache), (PS802_11Header) (skb->data + 4))) {
             pDevice->s802_11Counter.FrameDuplicateCount++;
-            return FALSE;
+            return false;
         }
     }
 
@@ -475,14 +455,14 @@ device_receive_frame (
     s_vGetDASA(skb->data+4, &cbHeaderSize, &pDevice->sRxEthHeader);
 
     // filter packet send from myself
-    if (IS_ETH_ADDRESS_EQUAL((PBYTE)&(pDevice->sRxEthHeader.abySrcAddr[0]), pDevice->abyCurrentNetAddr))
-        return FALSE;
+    if (!compare_ether_addr((unsigned char *)&(pDevice->sRxEthHeader.abySrcAddr[0]), pDevice->abyCurrentNetAddr))
+        return false;
 
     if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) || (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
         if (IS_CTL_PSPOLL(pbyFrame) || !IS_TYPE_CONTROL(pbyFrame)) {
             p802_11Header = (PS802_11Header) (pbyFrame);
             // get SA NodeIndex
-            if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(p802_11Header->abyAddr2), &iSANodeIndex)) {
+            if (BSSDBbIsSTAInNodeDB(pMgmt, (unsigned char *)(p802_11Header->abyAddr2), &iSANodeIndex)) {
                 pMgmt->sNodeDBTable[iSANodeIndex].ulLastRxJiffer = jiffies;
                 pMgmt->sNodeDBTable[iSANodeIndex].uInActiveCount = 0;
             }
@@ -490,17 +470,17 @@ device_receive_frame (
     }
 
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
-        if (s_bAPModeRxCtl(pDevice, pbyFrame, iSANodeIndex) == TRUE) {
-            return FALSE;
+        if (s_bAPModeRxCtl(pDevice, pbyFrame, iSANodeIndex) == true) {
+            return false;
         }
     }
 
 
     if (IS_FC_WEP(pbyFrame)) {
-        BOOL     bRxDecryOK = FALSE;
+        bool bRxDecryOK = false;
 
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"rx WEP pkt\n");
-        bIsWEP = TRUE;
+        bIsWEP = true;
         if ((pDevice->bEnableHostWEP) && (iSANodeIndex >= 0)) {
             pKey = &STempKey;
             pKey->byCipherSuite = pMgmt->sNodeDBTable[iSANodeIndex].byCipherSuite;
@@ -552,11 +532,11 @@ device_receive_frame (
 //                      pDevice->s802_11Counter.WEPICVErrorCount.QuadPart++;
                     }
                 }
-                return FALSE;
+                return false;
             }
         } else {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"WEP Func Fail\n");
-            return FALSE;
+            return false;
         }
         if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_CCMP))
             FrameSize -= 8;         // Message Integrity Code
@@ -584,18 +564,18 @@ device_receive_frame (
 
         }
         else {
-            return FALSE;
+            return false;
         }
     }
 
 
 // Management & Control frame Handle
-    if ((IS_TYPE_DATA((skb->data+4))) == FALSE) {
+    if ((IS_TYPE_DATA((skb->data+4))) == false) {
         // Handle Control & Manage Frame
 
         if (IS_TYPE_MGMT((skb->data+4))) {
-            PBYTE pbyData1;
-            PBYTE pbyData2;
+            unsigned char *pbyData1;
+            unsigned char *pbyData2;
 
             pRxPacket->p80211Header = (PUWLAN_80211HDR)(skb->data+4);
             pRxPacket->cbMPDULen = FrameSize;
@@ -649,13 +629,13 @@ device_receive_frame (
     	        skb->protocol = htons(ETH_P_802_2);
 	            memset(skb->cb, 0, sizeof(skb->cb));
 	            netif_rx(skb);
-                return TRUE;
+                return true;
 	        }
         }
         else {
             // Control Frame
         };
-        return FALSE;
+        return false;
     }
     else {
         if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
@@ -667,12 +647,12 @@ device_receive_frame (
                         pDevice->dev->name);
                     }
                 }
-                return FALSE;
+                return false;
             }
         }
         else {
             // discard DATA packet while not associate || BSSID error
-            if ((pDevice->bLinkPass == FALSE) ||
+            if ((pDevice->bLinkPass == false) ||
                 !(*pbyRsr & RSR_BSSIDOK)) {
                 if (bDeFragRx) {
                     if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
@@ -680,12 +660,12 @@ device_receive_frame (
                         pDevice->dev->name);
                     }
                 }
-                return FALSE;
+                return false;
             }
    //mike add:station mode check eapol-key challenge--->
    	  {
-   	    BYTE  Protocol_Version;    //802.1x Authentication
-	    BYTE  Packet_Type;           //802.1x Authentication
+   	    unsigned char Protocol_Version;    //802.1x Authentication
+	    unsigned char Packet_Type;           //802.1x Authentication
               if (bIsWEP)
                   cbIVOffset = 8;
               else
@@ -697,7 +677,7 @@ device_receive_frame (
 	     if (wEtherType == ETH_P_PAE) {         //Protocol Type in LLC-Header
                   if(((Protocol_Version==1) ||(Protocol_Version==2)) &&
 		     (Packet_Type==3)) {  //802.1x OR eapol-key challenge frame receive
-                        bRxeapol_key = TRUE;
+                        bRxeapol_key = true;
                   }
 	      }
    	  }
@@ -716,8 +696,8 @@ device_receive_frame (
             }
         }
         else {
-            if (pDevice->pMgmt->bInTIMWake == TRUE) {
-                pDevice->pMgmt->bInTIMWake = FALSE;
+            if (pDevice->pMgmt->bInTIMWake == true) {
+                pDevice->pMgmt->bInTIMWake = false;
             }
         }
     };
@@ -725,7 +705,7 @@ device_receive_frame (
     // Now it only supports 802.11g Infrastructure Mode, and support rate must up to 54 Mbps
     if (pDevice->bDiversityEnable && (FrameSize>50) &&
         (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) &&
-        (pDevice->bLinkPass == TRUE)) {
+        (pDevice->bLinkPass == true)) {
 	//printk("device_receive_frame: RxRate is %d\n",*pbyRxRate);
 		BBvAntennaDiversity(pDevice, s_byGetRateIdx(*pbyRxRate), 0);
     }
@@ -752,8 +732,8 @@ device_receive_frame (
 
     // -----------------------------------------------
 
-    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnable8021x == TRUE)){
-        BYTE    abyMacHdr[24];
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnable8021x == true)){
+        unsigned char abyMacHdr[24];
 
         // Only 802.1x packet incoming allowed
         if (bIsWEP)
@@ -767,7 +747,7 @@ device_receive_frame (
         if (wEtherType == ETH_P_PAE) {
             skb->dev = pDevice->apdev;
 
-            if (bIsWEP == TRUE) {
+            if (bIsWEP == true) {
                 // strip IV header(8)
                 memcpy(&abyMacHdr[0], (skb->data + 4), 24);
                 memcpy((skb->data + 4 + cbIVOffset), &abyMacHdr[0], 24);
@@ -781,12 +761,12 @@ device_receive_frame (
             skb->protocol = htons(ETH_P_802_2);
             memset(skb->cb, 0, sizeof(skb->cb));
             netif_rx(skb);
-            return TRUE;
+            return true;
 
 }
         // check if 802.1x authorized
         if (!(pMgmt->sNodeDBTable[iSANodeIndex].dwFlags & WLAN_STA_AUTHORIZED))
-            return FALSE;
+            return false;
     }
 
 
@@ -800,53 +780,53 @@ device_receive_frame (
     // Soft MIC
     if ((pKey != NULL) && (pKey->byCipherSuite == KEY_CTL_TKIP)) {
         if (bIsWEP) {
-            PDWORD          pdwMIC_L;
-            PDWORD          pdwMIC_R;
-            DWORD           dwMIC_Priority;
-            DWORD           dwMICKey0 = 0, dwMICKey1 = 0;
-            DWORD           dwLocalMIC_L = 0;
-            DWORD           dwLocalMIC_R = 0;
+            unsigned long *pdwMIC_L;
+            unsigned long *pdwMIC_R;
+            unsigned long dwMIC_Priority;
+            unsigned long dwMICKey0 = 0, dwMICKey1 = 0;
+            unsigned long dwLocalMIC_L = 0;
+            unsigned long dwLocalMIC_R = 0;
             viawget_wpa_header *wpahdr;
 
 
             if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
-                dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[24]));
-                dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[28]));
+                dwMICKey0 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[24]));
+                dwMICKey1 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[28]));
             }
             else {
                 if (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
-                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[16]));
-                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[20]));
+                    dwMICKey0 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[16]));
+                    dwMICKey1 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[20]));
                 } else if ((pKey->dwKeyIndex & BIT28) == 0) {
-                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[16]));
-                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[20]));
+                    dwMICKey0 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[16]));
+                    dwMICKey1 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[20]));
                 } else {
-                    dwMICKey0 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[24]));
-                    dwMICKey1 = cpu_to_le32(*(PDWORD)(&pKey->abyKey[28]));
+                    dwMICKey0 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[24]));
+                    dwMICKey1 = cpu_to_le32(*(unsigned long *)(&pKey->abyKey[28]));
                 }
             }
 
             MIC_vInit(dwMICKey0, dwMICKey1);
-            MIC_vAppend((PBYTE)&(pDevice->sRxEthHeader.abyDstAddr[0]), 12);
+            MIC_vAppend((unsigned char *)&(pDevice->sRxEthHeader.abyDstAddr[0]), 12);
             dwMIC_Priority = 0;
-            MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+            MIC_vAppend((unsigned char *)&dwMIC_Priority, 4);
             // 4 is Rcv buffer header, 24 is MAC Header, and 8 is IV and Ext IV.
-            MIC_vAppend((PBYTE)(skb->data + 4 + WLAN_HDR_ADDR3_LEN + 8),
+            MIC_vAppend((unsigned char *)(skb->data + 4 + WLAN_HDR_ADDR3_LEN + 8),
                         FrameSize - WLAN_HDR_ADDR3_LEN - 8);
             MIC_vGetMIC(&dwLocalMIC_L, &dwLocalMIC_R);
             MIC_vUnInit();
 
-            pdwMIC_L = (PDWORD)(skb->data + 4 + FrameSize);
-            pdwMIC_R = (PDWORD)(skb->data + 4 + FrameSize + 4);
+            pdwMIC_L = (unsigned long *)(skb->data + 4 + FrameSize);
+            pdwMIC_R = (unsigned long *)(skb->data + 4 + FrameSize + 4);
             //DBG_PRN_GRP12(("RxL: %lx, RxR: %lx\n", *pdwMIC_L, *pdwMIC_R));
             //DBG_PRN_GRP12(("LocalL: %lx, LocalR: %lx\n", dwLocalMIC_L, dwLocalMIC_R));
             //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwMICKey0= %lx,dwMICKey1= %lx \n", dwMICKey0, dwMICKey1);
 
 
             if ((cpu_to_le32(*pdwMIC_L) != dwLocalMIC_L) || (cpu_to_le32(*pdwMIC_R) != dwLocalMIC_R) ||
-                (pDevice->bRxMICFail == TRUE)) {
+                (pDevice->bRxMICFail == true)) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC comparison is fail!\n");
-                pDevice->bRxMICFail = FALSE;
+                pDevice->bRxMICFail = false;
                 //pDevice->s802_11Counter.TKIPLocalMICFailures.QuadPart++;
                 pDevice->s802_11Counter.TKIPLocalMICFailures++;
                 if (bDeFragRx) {
@@ -858,7 +838,7 @@ device_receive_frame (
                //2008-0409-07, <Add> by Einsn Liu
        #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 				//send event to wpa_supplicant
-				//if(pDevice->bWPADevEnable == TRUE)
+				//if(pDevice->bWPADevEnable == true)
 				{
 					union iwreq_data wrqu;
 					struct iw_michaelmicfailure ev;
@@ -906,7 +886,7 @@ device_receive_frame (
                      pDevice->skb = dev_alloc_skb((int)pDevice->rx_buf_sz);
                  };
 
-                return FALSE;
+                return false;
 
             }
         }
@@ -917,13 +897,13 @@ device_receive_frame (
     if ((pKey != NULL) && ((pKey->byCipherSuite == KEY_CTL_TKIP) ||
                            (pKey->byCipherSuite == KEY_CTL_CCMP))) {
         if (bIsWEP) {
-            WORD        wLocalTSC15_0 = 0;
-            DWORD       dwLocalTSC47_16 = 0;
-            ULONGLONG       RSC = 0;
+            unsigned short wLocalTSC15_0 = 0;
+            unsigned long dwLocalTSC47_16 = 0;
+            unsigned long long       RSC = 0;
             // endian issues
-            RSC = *((ULONGLONG *) &(pKey->KeyRSC));
-            wLocalTSC15_0 = (WORD) RSC;
-            dwLocalTSC47_16 = (DWORD) (RSC>>16);
+            RSC = *((unsigned long long *) &(pKey->KeyRSC));
+            wLocalTSC15_0 = (unsigned short) RSC;
+            dwLocalTSC47_16 = (unsigned long) (RSC>>16);
 
             RSC = dwRxTSC47_16;
             RSC <<= 16;
@@ -950,7 +930,7 @@ device_receive_frame (
                                 pDevice->dev->name);
                         }
                     }
-                    return FALSE;
+                    return false;
                 }
             }
         }
@@ -963,13 +943,13 @@ device_receive_frame (
     }
 
 
-    s_vProcessRxMACHeader(pDevice, (PBYTE)(skb->data+4), FrameSize, bIsWEP, bExtIV, &cbHeaderOffset);
+    s_vProcessRxMACHeader(pDevice, (unsigned char *)(skb->data+4), FrameSize, bIsWEP, bExtIV, &cbHeaderOffset);
     FrameSize -= cbHeaderOffset;
     cbHeaderOffset += 4;        // 4 is Rcv buffer header
 
     // Null data, framesize = 14
     if (FrameSize < 15)
-        return FALSE;
+        return false;
 
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
         if (s_bAPModeRxData(pDevice,
@@ -978,7 +958,7 @@ device_receive_frame (
                             cbHeaderOffset,
                             iSANodeIndex,
                             iDANodeIndex
-                            ) == FALSE) {
+                            ) == false) {
 
             if (bDeFragRx) {
                 if (!device_alloc_frag_buf(pDevice, &pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx])) {
@@ -986,10 +966,10 @@ device_receive_frame (
                     pDevice->dev->name);
                 }
             }
-            return FALSE;
+            return false;
         }
 
-//        if(pDevice->bRxMICFail == FALSE) {
+//        if(pDevice->bRxMICFail == false) {
 //           for (ii =0; ii < 100; ii++)
 //                printk(" %02x", *(skb->data + ii));
 //           printk("\n");
@@ -1016,7 +996,7 @@ device_receive_frame (
                     pDevice->dev->name);
                 }
             }
-			return FALSE;
+			return false;
 		}
 	}
 */
@@ -1031,17 +1011,17 @@ device_receive_frame (
             DBG_PRT(MSG_LEVEL_ERR,KERN_ERR "%s: can not alloc more frag bufs\n",
                 pDevice->dev->name);
         }
-        return FALSE;
+        return false;
     }
 
-    return TRUE;
+    return true;
 }
 
 
-static BOOL s_bAPModeRxCtl (
+static bool s_bAPModeRxCtl (
     PSDevice pDevice,
-    PBYTE    pbyFrame,
-    INT      iSANodeIndex
+    unsigned char *pbyFrame,
+    int      iSANodeIndex
     )
 {
     PS802_11Header      p802_11Header;
@@ -1063,30 +1043,30 @@ static BOOL s_bAPModeRxCtl (
                     // reason = (6) class 2 received from nonauth sta
                     vMgrDeAuthenBeginSta(pDevice,
                                          pMgmt,
-                                         (PBYTE)(p802_11Header->abyAddr2),
+                                         (unsigned char *)(p802_11Header->abyAddr2),
                                          (WLAN_MGMT_REASON_CLASS2_NONAUTH),
                                          &Status
                                          );
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: send vMgrDeAuthenBeginSta 1\n");
-                    return TRUE;
+                    return true;
                 };
                 if (pMgmt->sNodeDBTable[iSANodeIndex].eNodeState < NODE_ASSOC) {
                     // send deassoc notification
                     // reason = (7) class 3 received from nonassoc sta
                     vMgrDisassocBeginSta(pDevice,
                                          pMgmt,
-                                         (PBYTE)(p802_11Header->abyAddr2),
+                                         (unsigned char *)(p802_11Header->abyAddr2),
                                          (WLAN_MGMT_REASON_CLASS3_NONASSOC),
                                          &Status
                                          );
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: send vMgrDisassocBeginSta 2\n");
-                    return TRUE;
+                    return true;
                 };
 
                 if (pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable) {
                     // delcare received ps-poll event
                     if (IS_CTL_PSPOLL(pbyFrame)) {
-                        pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                        pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = true;
                         bScheduleCommand((void *)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 1\n");
                     }
@@ -1094,8 +1074,8 @@ static BOOL s_bAPModeRxCtl (
                         // check Data PS state
                         // if PW bit off, send out all PS bufferring packets.
                         if (!IS_FC_POWERMGT(pbyFrame)) {
-                            pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = FALSE;
-                            pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                            pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = false;
+                            pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = true;
                             bScheduleCommand((void *)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 2\n");
                         }
@@ -1103,15 +1083,15 @@ static BOOL s_bAPModeRxCtl (
                 }
                 else {
                    if (IS_FC_POWERMGT(pbyFrame)) {
-                       pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = TRUE;
+                       pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = true;
                        // Once if STA in PS state, enable multicast bufferring
-                       pMgmt->sNodeDBTable[0].bPSEnable = TRUE;
+                       pMgmt->sNodeDBTable[0].bPSEnable = true;
                    }
                    else {
                       // clear all pending PS frame.
                       if (pMgmt->sNodeDBTable[iSANodeIndex].wEnQueueCnt > 0) {
-                          pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = FALSE;
-                          pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = TRUE;
+                          pMgmt->sNodeDBTable[iSANodeIndex].bPSEnable = false;
+                          pMgmt->sNodeDBTable[iSANodeIndex].bRxPSPoll = true;
                           bScheduleCommand((void *)pDevice, WLAN_CMD_RX_PSPOLL, NULL);
                          DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: WLAN_CMD_RX_PSPOLL 3\n");
 
@@ -1122,7 +1102,7 @@ static BOOL s_bAPModeRxCtl (
             else {
                   vMgrDeAuthenBeginSta(pDevice,
                                        pMgmt,
-                                       (PBYTE)(p802_11Header->abyAddr2),
+                                       (unsigned char *)(p802_11Header->abyAddr2),
                                        (WLAN_MGMT_REASON_CLASS2_NONAUTH),
                                        &Status
                                        );
@@ -1154,31 +1134,31 @@ static BOOL s_bAPModeRxCtl (
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc: wFrameCtl= %x\n", p802_11Header->wFrameCtl );
                     VNSvInPortB(pDevice->PortOffset + MAC_REG_RCR, &(pDevice->byRxMode));
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dpc:pDevice->byRxMode = %x\n", pDevice->byRxMode );
-                    return TRUE;
+                    return true;
             }
         }
     }
-    return FALSE;
+    return false;
 
 }
 
-static BOOL s_bHandleRxEncryption (
+static bool s_bHandleRxEncryption (
     PSDevice     pDevice,
-    PBYTE        pbyFrame,
-    UINT         FrameSize,
-    PBYTE        pbyRsr,
-    PBYTE       pbyNewRsr,
+    unsigned char *pbyFrame,
+    unsigned int FrameSize,
+    unsigned char *pbyRsr,
+    unsigned char *pbyNewRsr,
     PSKeyItem   *pKeyOut,
-    int *       pbExtIV,
-    PWORD       pwRxTSC15_0,
-    PDWORD      pdwRxTSC47_16
+    bool *pbExtIV,
+    unsigned short *pwRxTSC15_0,
+    unsigned long *pdwRxTSC47_16
     )
 {
-    UINT            PayloadLen = FrameSize;
-    PBYTE           pbyIV;
-    BYTE            byKeyIdx;
+    unsigned int PayloadLen = FrameSize;
+    unsigned char *pbyIV;
+    unsigned char byKeyIdx;
     PSKeyItem       pKey = NULL;
-    BYTE            byDecMode = KEY_CTL_WEP;
+    unsigned char byDecMode = KEY_CTL_WEP;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
 
 
@@ -1186,8 +1166,8 @@ static BOOL s_bHandleRxEncryption (
     *pdwRxTSC47_16 = 0;
 
     pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
-    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
-         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
+    if ( WLAN_GET_FC_TODS(*(unsigned short *)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(unsigned short *)pbyFrame) ) {
          pbyIV += 6;             // 6 is 802.11 address4
          PayloadLen -= 6;
     }
@@ -1204,7 +1184,7 @@ static BOOL s_bHandleRxEncryption (
             (pDevice->pMgmt->byCSSPK != KEY_CTL_NONE)) {
             // unicast pkt use pairwise key
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"unicast pkt\n");
-            if (KeybGetKey(&(pDevice->sKey), pDevice->abyBSSID, 0xFFFFFFFF, &pKey) == TRUE) {
+            if (KeybGetKey(&(pDevice->sKey), pDevice->abyBSSID, 0xFFFFFFFF, &pKey) == true) {
                 if (pDevice->pMgmt->byCSSPK == KEY_CTL_TKIP)
                     byDecMode = KEY_CTL_TKIP;
                 else if (pDevice->pMgmt->byCSSPK == KEY_CTL_CCMP)
@@ -1238,24 +1218,24 @@ static BOOL s_bHandleRxEncryption (
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey == NULL\n");
         if (byDecMode == KEY_CTL_WEP) {
 //            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
-        } else if (pDevice->bLinkPass == TRUE) {
+        } else if (pDevice->bLinkPass == true) {
 //            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
         }
-        return FALSE;
+        return false;
     }
     if (byDecMode != pKey->byCipherSuite) {
         if (byDecMode == KEY_CTL_WEP) {
 //            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
-        } else if (pDevice->bLinkPass == TRUE) {
+        } else if (pDevice->bLinkPass == true) {
 //            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
         }
         *pKeyOut = NULL;
-        return FALSE;
+        return false;
     }
     if (byDecMode == KEY_CTL_WEP) {
         // handle WEP
         if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
-            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE)) {
+            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == true)) {
             // Software WEP
             // 1. 3253A
             // 2. WEP 256
@@ -1275,12 +1255,12 @@ static BOOL s_bHandleRxEncryption (
         // TKIP/AES
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
-        *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
+        *pdwRxTSC47_16 = cpu_to_le32(*(unsigned long *)(pbyIV + 4));
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
         } else {
-            *pwRxTSC15_0 = cpu_to_le16(*(PWORD)pbyIV);
+            *pwRxTSC15_0 = cpu_to_le16(*(unsigned short *)pbyIV);
         }
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TSC0_15: %x\n", *pwRxTSC15_0);
 
@@ -1303,28 +1283,28 @@ static BOOL s_bHandleRxEncryption (
     }// end of TKIP/AES
 
     if ((*(pbyIV+3) & 0x20) != 0)
-        *pbExtIV = TRUE;
-    return TRUE;
+        *pbExtIV = true;
+    return true;
 }
 
 
-static BOOL s_bHostWepRxEncryption (
+static bool s_bHostWepRxEncryption (
     PSDevice     pDevice,
-    PBYTE        pbyFrame,
-    UINT         FrameSize,
-    PBYTE        pbyRsr,
-    BOOL         bOnFly,
+    unsigned char *pbyFrame,
+    unsigned int FrameSize,
+    unsigned char *pbyRsr,
+    bool bOnFly,
     PSKeyItem    pKey,
-    PBYTE       pbyNewRsr,
-    int *       pbExtIV,
-    PWORD       pwRxTSC15_0,
-    PDWORD      pdwRxTSC47_16
+    unsigned char *pbyNewRsr,
+    bool *pbExtIV,
+    unsigned short *pwRxTSC15_0,
+    unsigned long *pdwRxTSC47_16
     )
 {
-    UINT            PayloadLen = FrameSize;
-    PBYTE           pbyIV;
-    BYTE            byKeyIdx;
-    BYTE            byDecMode = KEY_CTL_WEP;
+    unsigned int PayloadLen = FrameSize;
+    unsigned char *pbyIV;
+    unsigned char byKeyIdx;
+    unsigned char byDecMode = KEY_CTL_WEP;
     PS802_11Header  pMACHeader;
 
 
@@ -1333,8 +1313,8 @@ static BOOL s_bHostWepRxEncryption (
     *pdwRxTSC47_16 = 0;
 
     pbyIV = pbyFrame + WLAN_HDR_ADDR3_LEN;
-    if ( WLAN_GET_FC_TODS(*(PWORD)pbyFrame) &&
-         WLAN_GET_FC_FROMDS(*(PWORD)pbyFrame) ) {
+    if ( WLAN_GET_FC_TODS(*(unsigned short *)pbyFrame) &&
+         WLAN_GET_FC_FROMDS(*(unsigned short *)pbyFrame) ) {
          pbyIV += 6;             // 6 is 802.11 address4
          PayloadLen -= 6;
     }
@@ -1353,18 +1333,18 @@ static BOOL s_bHostWepRxEncryption (
     if (byDecMode != pKey->byCipherSuite) {
         if (byDecMode == KEY_CTL_WEP) {
 //            pDevice->s802_11Counter.WEPUndecryptableCount.QuadPart++;
-        } else if (pDevice->bLinkPass == TRUE) {
+        } else if (pDevice->bLinkPass == true) {
 //            pDevice->s802_11Counter.DecryptFailureCount.QuadPart++;
         }
-        return FALSE;
+        return false;
     }
 
     if (byDecMode == KEY_CTL_WEP) {
         // handle WEP
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"byDecMode == KEY_CTL_WEP \n");
         if ((pDevice->byLocalID <= REV_ID_VT3253_A1) ||
-            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == TRUE) ||
-            (bOnFly == FALSE)) {
+            (((PSKeyTable)(pKey->pvKeyTable))->bSoftWEP == true) ||
+            (bOnFly == false)) {
             // Software WEP
             // 1. 3253A
             // 2. WEP 256
@@ -1385,19 +1365,19 @@ static BOOL s_bHostWepRxEncryption (
         // TKIP/AES
 
         PayloadLen -= (WLAN_HDR_ADDR3_LEN + 8 + 4); // 24 is 802.11 header, 8 is IV&ExtIV, 4 is crc
-        *pdwRxTSC47_16 = cpu_to_le32(*(PDWORD)(pbyIV + 4));
+        *pdwRxTSC47_16 = cpu_to_le32(*(unsigned long *)(pbyIV + 4));
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ExtIV: %lx\n",*pdwRxTSC47_16);
 
         if (byDecMode == KEY_CTL_TKIP) {
             *pwRxTSC15_0 = cpu_to_le16(MAKEWORD(*(pbyIV+2), *pbyIV));
         } else {
-            *pwRxTSC15_0 = cpu_to_le16(*(PWORD)pbyIV);
+            *pwRxTSC15_0 = cpu_to_le16(*(unsigned short *)pbyIV);
         }
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"TSC0_15: %x\n", *pwRxTSC15_0);
 
         if (byDecMode == KEY_CTL_TKIP) {
 
-            if ((pDevice->byLocalID <= REV_ID_VT3253_A1) || (bOnFly == FALSE)) {
+            if ((pDevice->byLocalID <= REV_ID_VT3253_A1) || (bOnFly == false)) {
                 // Software TKIP
                 // 1. 3253 A
                 // 2. NotOnFly
@@ -1417,7 +1397,7 @@ static BOOL s_bHostWepRxEncryption (
         }
 
         if (byDecMode == KEY_CTL_CCMP) {
-            if (bOnFly == FALSE) {
+            if (bOnFly == false) {
                 // Software CCMP
                 // NotOnFly
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"soft KEY_CTL_CCMP\n");
@@ -1433,34 +1413,34 @@ static BOOL s_bHostWepRxEncryption (
     }// end of TKIP/AES
 
     if ((*(pbyIV+3) & 0x20) != 0)
-        *pbExtIV = TRUE;
-    return TRUE;
+        *pbExtIV = true;
+    return true;
 }
 
 
 
-static BOOL s_bAPModeRxData (
+static bool s_bAPModeRxData (
     PSDevice pDevice,
     struct sk_buff* skb,
-    UINT     FrameSize,
-    UINT     cbHeaderOffset,
-    INT      iSANodeIndex,
-    INT      iDANodeIndex
+    unsigned int FrameSize,
+    unsigned int cbHeaderOffset,
+    int      iSANodeIndex,
+    int      iDANodeIndex
     )
 {
     PSMgmtObject        pMgmt = pDevice->pMgmt;
-    BOOL                bRelayAndForward = FALSE;
-    BOOL                bRelayOnly = FALSE;
-    BYTE                byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
-    WORD                wAID;
+    bool bRelayAndForward = false;
+    bool bRelayOnly = false;
+    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    unsigned short wAID;
 
 
     struct sk_buff* skbcpy = NULL;
 
     if (FrameSize > CB_MAX_BUF_SIZE)
-        return FALSE;
+        return false;
     // check DA
-    if(IS_MULTICAST_ADDRESS((PBYTE)(skb->data+cbHeaderOffset))) {
+    if(is_multicast_ether_addr((unsigned char *)(skb->data+cbHeaderOffset))) {
        if (pMgmt->sNodeDBTable[0].bPSEnable) {
 
            skbcpy = dev_alloc_skb((int)pDevice->rx_buf_sz);
@@ -1481,12 +1461,12 @@ static BOOL s_bAPModeRxData (
            }
        }
        else {
-           bRelayAndForward = TRUE;
+           bRelayAndForward = true;
        }
     }
     else {
         // check if relay
-        if (BSSDBbIsSTAInNodeDB(pMgmt, (PBYTE)(skb->data+cbHeaderOffset), &iDANodeIndex)) {
+        if (BSSDBbIsSTAInNodeDB(pMgmt, (unsigned char *)(skb->data+cbHeaderOffset), &iDANodeIndex)) {
             if (pMgmt->sNodeDBTable[iDANodeIndex].eNodeState >= NODE_ASSOC) {
                 if (pMgmt->sNodeDBTable[iDANodeIndex].bPSEnable) {
                     // queue this skb until next PS tx, and then release.
@@ -1500,10 +1480,10 @@ static BOOL s_bAPModeRxData (
                     pMgmt->abyPSTxMap[wAID >> 3] |=  byMask[wAID & 7];
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "relay: index= %d, pMgmt->abyPSTxMap[%d]= %d\n",
                                iDANodeIndex, (wAID >> 3), pMgmt->abyPSTxMap[wAID >> 3]);
-                    return TRUE;
+                    return true;
                 }
                 else {
-                    bRelayOnly = TRUE;
+                    bRelayOnly = true;
                 }
             }
         };
@@ -1515,16 +1495,16 @@ static BOOL s_bAPModeRxData (
             iDANodeIndex = 0;
 
         if ((pDevice->uAssocCount > 1) && (iDANodeIndex >= 0)) {
-            ROUTEbRelay(pDevice, (PBYTE)(skb->data + cbHeaderOffset), FrameSize, (UINT)iDANodeIndex);
+            ROUTEbRelay(pDevice, (unsigned char *)(skb->data + cbHeaderOffset), FrameSize, (unsigned int)iDANodeIndex);
         }
 
         if (bRelayOnly)
-            return FALSE;
+            return false;
     }
     // none associate, don't forward
     if (pDevice->uAssocCount == 0)
-        return FALSE;
+        return false;
 
-    return TRUE;
+    return true;
 }
 
diff --git a/drivers/staging/vt6655/dpc.h b/drivers/staging/vt6655/dpc.h
index e574963fee0..c1b6e76a421 100644
--- a/drivers/staging/vt6655/dpc.h
+++ b/drivers/staging/vt6655/dpc.h
@@ -41,7 +41,7 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL
+bool
 device_receive_frame (
     PSDevice pDevice,
     PSRxDesc pCurrRD
diff --git a/drivers/staging/vt6655/hostap.c b/drivers/staging/vt6655/hostap.c
index 195cc36654a..5b83f942cda 100644
--- a/drivers/staging/vt6655/hostap.c
+++ b/drivers/staging/vt6655/hostap.c
@@ -154,9 +154,9 @@ static int hostap_disable_hostapd(PSDevice pDevice, int rtnl_locked)
 	}
 	kfree(pDevice->apdev);
 	pDevice->apdev = NULL;
-    pDevice->bEnable8021x = FALSE;
-    pDevice->bEnableHostWEP = FALSE;
-    pDevice->bEncryptionEnable = FALSE;
+    pDevice->bEnable8021x = false;
+    pDevice->bEnableHostWEP = false;
+    pDevice->bEncryptionEnable = false;
 
 //4.2007-0118-03,<Add> by EinsnLiu
 //execute some clear work
@@ -215,7 +215,7 @@ int vt6655_hostap_set_hostapd(PSDevice pDevice, int val, int rtnl_locked)
 static int hostap_remove_sta(PSDevice pDevice,
 				     struct viawget_hostapd_param *param)
 {
-	UINT uNodeIndex;
+	unsigned int uNodeIndex;
 
 
     if (BSSDBbIsSTAInNodeDB(pDevice->pMgmt, param->sta_addr, &uNodeIndex)) {
@@ -244,7 +244,7 @@ static int hostap_add_sta(PSDevice pDevice,
 				  struct viawget_hostapd_param *param)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-	UINT uNodeIndex;
+	unsigned int uNodeIndex;
 
 
     if (!BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
@@ -255,7 +255,7 @@ static int hostap_add_sta(PSDevice pDevice,
     pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = param->u.add_sta.capability;
 // TODO listenInterval
 //    pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = 1;
-    pMgmt->sNodeDBTable[uNodeIndex].bPSEnable = FALSE;
+    pMgmt->sNodeDBTable[uNodeIndex].bPSEnable = false;
     pMgmt->sNodeDBTable[uNodeIndex].bySuppRate = param->u.add_sta.tx_supp_rates;
 
     // set max tx rate
@@ -267,7 +267,7 @@ static int hostap_add_sta(PSDevice pDevice,
     pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble =
             WLAN_GET_CAP_INFO_SHORTPREAMBLE(pMgmt->sNodeDBTable[uNodeIndex].wCapInfo);
 
-    pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)param->u.add_sta.aid;
+    pMgmt->sNodeDBTable[uNodeIndex].wAID = (unsigned short)param->u.add_sta.aid;
 
     pMgmt->sNodeDBTable[uNodeIndex].ulLastRxJiffer = jiffies;
 
@@ -304,7 +304,7 @@ static int hostap_get_info_sta(PSDevice pDevice,
 				       struct viawget_hostapd_param *param)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-	UINT uNodeIndex;
+	unsigned int uNodeIndex;
 
     if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
 	    param->u.get_info_sta.inactive_sec =
@@ -328,7 +328,7 @@ static int hostap_get_info_sta(PSDevice pDevice,
  *      pDevice   -
  *      param     -
  *  Out:
- *      TURE, FALSE
+ *      true, false
  *
  * Return Value:
  *
@@ -338,7 +338,7 @@ static int hostap_reset_txexc_sta(PSDevice pDevice,
 					  struct viawget_hostapd_param *param)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-	UINT uNodeIndex;
+	unsigned int uNodeIndex;
 
     if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
         pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts = 0;
@@ -368,13 +368,13 @@ static int hostap_set_flags_sta(PSDevice pDevice,
 					struct viawget_hostapd_param *param)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-	UINT uNodeIndex;
+	unsigned int uNodeIndex;
 
     if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &uNodeIndex)) {
 		pMgmt->sNodeDBTable[uNodeIndex].dwFlags |= param->u.set_flags_sta.flags_or;
 		pMgmt->sNodeDBTable[uNodeIndex].dwFlags &= param->u.set_flags_sta.flags_and;
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " dwFlags = %x \n",
-		            (UINT)pMgmt->sNodeDBTable[uNodeIndex].dwFlags);
+		            (unsigned int)pMgmt->sNodeDBTable[uNodeIndex].dwFlags);
 	}
 	else {
 	    return -ENOENT;
@@ -471,16 +471,16 @@ static int hostap_set_encryption(PSDevice pDevice,
 				       int param_len)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    DWORD   dwKeyIndex = 0;
-    BYTE    abyKey[MAX_KEY_LEN];
-    BYTE    abySeq[MAX_KEY_LEN];
+    unsigned long dwKeyIndex = 0;
+    unsigned char abyKey[MAX_KEY_LEN];
+    unsigned char abySeq[MAX_KEY_LEN];
     NDIS_802_11_KEY_RSC   KeyRSC;
-    BYTE    byKeyDecMode = KEY_CTL_WEP;
+    unsigned char byKeyDecMode = KEY_CTL_WEP;
 	int     ret = 0;
 	int     iNodeIndex = -1;
 	int     ii;
-	BOOL    bKeyTableFull = FALSE;
-	WORD    wKeyCtl = 0;
+	bool bKeyTableFull = false;
+	unsigned short wKeyCtl = 0;
 
 
 	param->u.crypt.err = 0;
@@ -509,7 +509,7 @@ static int hostap_set_encryption(PSDevice pDevice,
         iNodeIndex = 0;
 
 	} else {
-	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == FALSE) {
+	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == false) {
 	        param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " HOSTAP_CRYPT_ERR_UNKNOWN_ADDR\n");
 	        return -EINVAL;
@@ -520,14 +520,14 @@ static int hostap_set_encryption(PSDevice pDevice,
 
 	if (param->u.crypt.alg == WPA_ALG_NONE) {
 
-        if (pMgmt->sNodeDBTable[iNodeIndex].bOnFly == TRUE) {
+        if (pMgmt->sNodeDBTable[iNodeIndex].bOnFly == true) {
             if (KeybRemoveKey(&(pDevice->sKey),
                                 param->sta_addr,
                                 pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex,
-                                pDevice->PortOffset) == FALSE) {
+                                pDevice->PortOffset) == false) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "KeybRemoveKey fail \n");
             }
-            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = false;
         }
         pMgmt->sNodeDBTable[iNodeIndex].byKeyIndex = 0;
         pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex = 0;
@@ -553,16 +553,16 @@ static int hostap_set_encryption(PSDevice pDevice,
             param->u.crypt.key_len
            );
 
-    dwKeyIndex = (DWORD)(param->u.crypt.idx);
+    dwKeyIndex = (unsigned long)(param->u.crypt.idx);
     if (param->u.crypt.flags & HOSTAP_CRYPT_FLAG_SET_TX_KEY) {
-        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
-        pDevice->bTransmitKey = TRUE;
+        pDevice->byKeyIndex = (unsigned char)dwKeyIndex;
+        pDevice->bTransmitKey = true;
         dwKeyIndex |= (1 << 31);
     }
 
 	if (param->u.crypt.alg == WPA_ALG_WEP) {
 
-        if ((pDevice->bEnable8021x == FALSE) || (iNodeIndex == 0)) {
+        if ((pDevice->bEnable8021x == false) || (iNodeIndex == 0)) {
             KeybSetDefaultKey(&(pDevice->sKey),
                                 dwKeyIndex & ~(BIT30 | USE_KEYRSC),
                                 param->u.crypt.key_len,
@@ -580,21 +580,21 @@ static int hostap_set_encryption(PSDevice pDevice,
                            dwKeyIndex & ~(USE_KEYRSC),
                            param->u.crypt.key_len,
                            (PQWORD) &(KeyRSC),
-                           (PBYTE)abyKey,
+                           (unsigned char *)abyKey,
                             KEY_CTL_WEP,
                             pDevice->PortOffset,
-                            pDevice->byLocalID) == TRUE) {
+                            pDevice->byLocalID) == true) {
 
-                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = true;
 
             } else {
                 // Key Table Full
-                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
-                bKeyTableFull = TRUE;
+                pMgmt->sNodeDBTable[iNodeIndex].bOnFly = false;
+                bKeyTableFull = true;
             }
         }
         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bEncryptionEnable = true;
         pMgmt->byCSSPK = KEY_CTL_WEP;
         pMgmt->byCSSGK = KEY_CTL_WEP;
         pMgmt->sNodeDBTable[iNodeIndex].byCipherSuite = KEY_CTL_WEP;
@@ -640,7 +640,7 @@ static int hostap_set_encryption(PSDevice pDevice,
                            byKeyDecMode,
                            pDevice->PortOffset,
                            pDevice->byLocalID);
-       pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+       pMgmt->sNodeDBTable[iNodeIndex].bOnFly = true;
 
     } else {
         dwKeyIndex |= (1 << 30); // set pairwise key
@@ -649,23 +649,23 @@ static int hostap_set_encryption(PSDevice pDevice,
                        dwKeyIndex,
                        param->u.crypt.key_len,
                        (PQWORD) &(KeyRSC),
-                       (PBYTE)abyKey,
+                       (unsigned char *)abyKey,
                         byKeyDecMode,
                         pDevice->PortOffset,
-                        pDevice->byLocalID) == TRUE) {
+                        pDevice->byLocalID) == true) {
 
-            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = TRUE;
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = true;
 
         } else {
             // Key Table Full
-            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = FALSE;
-            bKeyTableFull = TRUE;
+            pMgmt->sNodeDBTable[iNodeIndex].bOnFly = false;
+            bKeyTableFull = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " Key Table Full\n");
         }
 
     }
 
-    if (bKeyTableFull == TRUE) {
+    if (bKeyTableFull == true) {
         wKeyCtl &= 0x7F00;              // clear all key control filed
         wKeyCtl |= (byKeyDecMode << 4);
         wKeyCtl |= (byKeyDecMode);
@@ -686,7 +686,7 @@ static int hostap_set_encryption(PSDevice pDevice,
               );
 
 	// set wep key
-    pDevice->bEncryptionEnable = TRUE;
+    pDevice->bEncryptionEnable = true;
     pMgmt->sNodeDBTable[iNodeIndex].byCipherSuite = byKeyDecMode;
     pMgmt->sNodeDBTable[iNodeIndex].dwKeyIndex = dwKeyIndex;
     pMgmt->sNodeDBTable[iNodeIndex].dwTSC47_16 = 0;
@@ -727,7 +727,7 @@ static int hostap_get_encryption(PSDevice pDevice,
 	    param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
         iNodeIndex = 0;
 	} else {
-	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == FALSE) {
+	    if (BSSDBbIsSTAInNodeDB(pMgmt, param->sta_addr, &iNodeIndex) == false) {
 	        param->u.crypt.err = HOSTAP_CRYPT_ERR_UNKNOWN_ADDR;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "hostap_get_encryption: HOSTAP_CRYPT_ERR_UNKNOWN_ADDR\n");
 	        return -EINVAL;
@@ -736,7 +736,7 @@ static int hostap_get_encryption(PSDevice pDevice,
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "hostap_get_encryption: %d\n", iNodeIndex);
     memset(param->u.crypt.seq, 0, 8);
     for (ii = 0 ; ii < 8 ; ii++) {
-        param->u.crypt.seq[ii] = (BYTE)pMgmt->sNodeDBTable[iNodeIndex].KeyRSC >> (ii * 8);
+        param->u.crypt.seq[ii] = (unsigned char)pMgmt->sNodeDBTable[iNodeIndex].KeyRSC >> (ii * 8);
     }
 
 	return ret;
diff --git a/drivers/staging/vt6655/iocmd.h b/drivers/staging/vt6655/iocmd.h
index 60c0a362361..53c50c0fc81 100644
--- a/drivers/staging/vt6655/iocmd.h
+++ b/drivers/staging/vt6655/iocmd.h
@@ -37,7 +37,6 @@
 #define DEF
 #endif
 
-//typedef int BOOL;
 //typedef uint32_t u32;
 //typedef uint16_t u16;
 //typedef uint8_t u8;
@@ -109,10 +108,10 @@ typedef enum tagWZONETYPE {
 //
 #pragma pack(1)
 typedef struct tagSCmdRequest {
-	U8 	    name[16];
+	u8	    name[16];
 	void	*data;
-	U16	    wResult;
-	U16     wCmdCode;
+	u16	    wResult;
+	u16     wCmdCode;
 } SCmdRequest, *PSCmdRequest;
 
 //
@@ -121,7 +120,7 @@ typedef struct tagSCmdRequest {
 
 typedef struct tagSCmdScan {
 
-    U8	    ssid[SSID_MAXLEN + 2];
+	u8 ssid[SSID_MAXLEN + 2];
 
 } SCmdScan, *PSCmdScan;
 
@@ -132,12 +131,12 @@ typedef struct tagSCmdScan {
 
 typedef struct tagSCmdBSSJoin {
 
-    U16	    wBSSType;
-    U16     wBBPType;
-    U8	    ssid[SSID_MAXLEN + 2];
-    U32	    uChannel;
-    BOOL    bPSEnable;
-    BOOL    bShareKeyAuth;
+    u16	    wBSSType;
+    u16     wBBPType;
+    u8	    ssid[SSID_MAXLEN + 2];
+    u32	    uChannel;
+    bool bPSEnable;
+    bool bShareKeyAuth;
 
 } SCmdBSSJoin, *PSCmdBSSJoin;
 
@@ -147,7 +146,7 @@ typedef struct tagSCmdBSSJoin {
 
 typedef struct tagSCmdZoneTypeSet {
 
- BOOL       bWrite;
+ bool bWrite;
  WZONETYPE  ZoneType;
 
 } SCmdZoneTypeSet, *PSCmdZoneTypeSet;
@@ -155,33 +154,33 @@ typedef struct tagSCmdZoneTypeSet {
 #ifdef WPA_SM_Transtatus
 typedef struct tagSWPAResult {
          char	ifname[100];
-         U8		proto;
-         U8   key_mgmt;
-         U8   eap_type;
-         BOOL authenticated;
+         u8 proto;
+         u8 key_mgmt;
+         u8 eap_type;
+         bool authenticated;
 } SWPAResult, *PSWPAResult;
 #endif
 
 typedef struct tagSCmdStartAP {
 
-    U16	    wBSSType;
-    U16     wBBPType;
-    U8	    ssid[SSID_MAXLEN + 2];
-    U32 	uChannel;
-    U32     uBeaconInt;
-    BOOL    bShareKeyAuth;
-    U8      byBasicRate;
+    u16	    wBSSType;
+    u16     wBBPType;
+    u8	    ssid[SSID_MAXLEN + 2];
+    u32	    uChannel;
+    u32     uBeaconInt;
+    bool bShareKeyAuth;
+    u8      byBasicRate;
 
 } SCmdStartAP, *PSCmdStartAP;
 
 
 typedef struct tagSCmdSetWEP {
 
-    BOOL    bEnableWep;
-    U8      byKeyIndex;
-    U8      abyWepKey[WEP_NKEYS][WEP_KEYMAXLEN];
-    BOOL    bWepKeyAvailable[WEP_NKEYS];
-    U32     auWepKeyLength[WEP_NKEYS];
+    bool bEnableWep;
+    u8      byKeyIndex;
+    u8      abyWepKey[WEP_NKEYS][WEP_KEYMAXLEN];
+    bool bWepKeyAvailable[WEP_NKEYS];
+    u32     auWepKeyLength[WEP_NKEYS];
 
 } SCmdSetWEP, *PSCmdSetWEP;
 
@@ -189,39 +188,39 @@ typedef struct tagSCmdSetWEP {
 
 typedef struct tagSBSSIDItem {
 
-	U32	    uChannel;
-    U8      abyBSSID[BSSID_LEN];
-    U8      abySSID[SSID_MAXLEN + 1];
+	u32	    uChannel;
+    u8      abyBSSID[BSSID_LEN];
+    u8      abySSID[SSID_MAXLEN + 1];
     //2006-1116-01,<Modify> by NomadZhao
-    //U16	    wBeaconInterval;
-    //U16	    wCapInfo;
-    //U8      byNetType;
-    U8      byNetType;
-    U16	    wBeaconInterval;
-    U16	    wCapInfo;        // for address of byNetType at align 4
+    //u16	    wBeaconInterval;
+    //u16	    wCapInfo;
+    //u8      byNetType;
+    u8      byNetType;
+    u16	    wBeaconInterval;
+    u16	    wCapInfo;        // for address of byNetType at align 4
 
-    BOOL    bWEPOn;
-    U32     uRSSI;
+    bool bWEPOn;
+    u32     uRSSI;
 
 } SBSSIDItem;
 
 
 typedef struct tagSBSSIDList {
 
-	U32		    uItem;
+	u32		    uItem;
 	SBSSIDItem	sBSSIDList[0];
 } SBSSIDList, *PSBSSIDList;
 
 
 typedef struct tagSCmdLinkStatus {
 
-    BOOL    bLink;
-	U16	    wBSSType;
-	U8      byState;
-    U8      abyBSSID[BSSID_LEN];
-    U8      abySSID[SSID_MAXLEN + 2];
-    U32     uChannel;
-    U32     uLinkRate;
+    bool bLink;
+	u16   wBSSType;
+	u8      byState;
+    u8      abyBSSID[BSSID_LEN];
+    u8      abySSID[SSID_MAXLEN + 2];
+    u32     uChannel;
+    u32     uLinkRate;
 
 } SCmdLinkStatus, *PSCmdLinkStatus;
 
@@ -229,18 +228,18 @@ typedef struct tagSCmdLinkStatus {
 // 802.11 counter
 //
 typedef struct tagSDot11MIBCount {
-    U32 TransmittedFragmentCount;
-    U32 MulticastTransmittedFrameCount;
-    U32 FailedCount;
-    U32 RetryCount;
-    U32 MultipleRetryCount;
-    U32 RTSSuccessCount;
-    U32 RTSFailureCount;
-    U32 ACKFailureCount;
-    U32 FrameDuplicateCount;
-    U32 ReceivedFragmentCount;
-    U32 MulticastReceivedFrameCount;
-    U32 FCSErrorCount;
+	u32 TransmittedFragmentCount;
+	u32 MulticastTransmittedFrameCount;
+	u32 FailedCount;
+	u32 RetryCount;
+	u32 MultipleRetryCount;
+	u32 RTSSuccessCount;
+	u32 RTSFailureCount;
+	u32 ACKFailureCount;
+	u32 FrameDuplicateCount;
+	u32 ReceivedFragmentCount;
+	u32 MulticastReceivedFrameCount;
+	u32 FCSErrorCount;
 } SDot11MIBCount, *PSDot11MIBCount;
 
 
@@ -252,129 +251,129 @@ typedef struct tagSStatMIBCount {
     //
     // ISR status count
     //
-    U32   dwIsrTx0OK;
-    U32   dwIsrTx1OK;
-    U32   dwIsrBeaconTxOK;
-    U32   dwIsrRxOK;
-    U32   dwIsrTBTTInt;
-    U32   dwIsrSTIMERInt;
-    U32   dwIsrUnrecoverableError;
-    U32   dwIsrSoftInterrupt;
-    U32   dwIsrRxNoBuf;
+	u32   dwIsrTx0OK;
+	u32   dwIsrTx1OK;
+	u32   dwIsrBeaconTxOK;
+	u32   dwIsrRxOK;
+	u32   dwIsrTBTTInt;
+	u32   dwIsrSTIMERInt;
+	u32   dwIsrUnrecoverableError;
+	u32   dwIsrSoftInterrupt;
+	u32   dwIsrRxNoBuf;
     /////////////////////////////////////
 
-    U32   dwIsrUnknown;               // unknown interrupt count
+	u32   dwIsrUnknown;               // unknown interrupt count
 
     // RSR status count
     //
-    U32   dwRsrFrmAlgnErr;
-    U32   dwRsrErr;
-    U32   dwRsrCRCErr;
-    U32   dwRsrCRCOk;
-    U32   dwRsrBSSIDOk;
-    U32   dwRsrADDROk;
-    U32   dwRsrICVOk;
-    U32   dwNewRsrShortPreamble;
-    U32   dwRsrLong;
-    U32   dwRsrRunt;
-
-    U32   dwRsrRxControl;
-    U32   dwRsrRxData;
-    U32   dwRsrRxManage;
-
-    U32   dwRsrRxPacket;
-    U32   dwRsrRxOctet;
-    U32   dwRsrBroadcast;
-    U32   dwRsrMulticast;
-    U32   dwRsrDirected;
+	u32   dwRsrFrmAlgnErr;
+	u32   dwRsrErr;
+	u32   dwRsrCRCErr;
+	u32   dwRsrCRCOk;
+	u32   dwRsrBSSIDOk;
+	u32   dwRsrADDROk;
+	u32   dwRsrICVOk;
+	u32   dwNewRsrShortPreamble;
+	u32   dwRsrLong;
+	u32   dwRsrRunt;
+
+	u32   dwRsrRxControl;
+	u32   dwRsrRxData;
+	u32   dwRsrRxManage;
+
+	u32   dwRsrRxPacket;
+	u32   dwRsrRxOctet;
+	u32   dwRsrBroadcast;
+	u32   dwRsrMulticast;
+	u32   dwRsrDirected;
     // 64-bit OID
-    U32   ullRsrOK;
+	u32   ullRsrOK;
 
     // for some optional OIDs (64 bits) and DMI support
-    U32   ullRxBroadcastBytes;
-    U32   ullRxMulticastBytes;
-    U32   ullRxDirectedBytes;
-    U32   ullRxBroadcastFrames;
-    U32   ullRxMulticastFrames;
-    U32   ullRxDirectedFrames;
-
-    U32   dwRsrRxFragment;
-    U32   dwRsrRxFrmLen64;
-    U32   dwRsrRxFrmLen65_127;
-    U32   dwRsrRxFrmLen128_255;
-    U32   dwRsrRxFrmLen256_511;
-    U32   dwRsrRxFrmLen512_1023;
-    U32   dwRsrRxFrmLen1024_1518;
+	u32   ullRxBroadcastBytes;
+	u32   ullRxMulticastBytes;
+	u32   ullRxDirectedBytes;
+	u32   ullRxBroadcastFrames;
+	u32   ullRxMulticastFrames;
+	u32   ullRxDirectedFrames;
+
+	u32   dwRsrRxFragment;
+	u32   dwRsrRxFrmLen64;
+	u32   dwRsrRxFrmLen65_127;
+	u32   dwRsrRxFrmLen128_255;
+	u32   dwRsrRxFrmLen256_511;
+	u32   dwRsrRxFrmLen512_1023;
+	u32   dwRsrRxFrmLen1024_1518;
 
     // TSR0,1 status count
     //
-    U32   dwTsrTotalRetry[2];        // total collision retry count
-    U32   dwTsrOnceRetry[2];         // this packet only occur one collision
-    U32   dwTsrMoreThanOnceRetry[2]; // this packet occur more than one collision
-    U32   dwTsrRetry[2];             // this packet has ever occur collision,
+	u32   dwTsrTotalRetry[2];        // total collision retry count
+	u32   dwTsrOnceRetry[2];         // this packet only occur one collision
+	u32   dwTsrMoreThanOnceRetry[2]; // this packet occur more than one collision
+	u32   dwTsrRetry[2];             // this packet has ever occur collision,
                                        // that is (dwTsrOnceCollision0 + dwTsrMoreThanOnceCollision0)
-    U32   dwTsrACKData[2];
-    U32   dwTsrErr[2];
-    U32   dwAllTsrOK[2];
-    U32   dwTsrRetryTimeout[2];
-    U32   dwTsrTransmitTimeout[2];
-
-    U32   dwTsrTxPacket[2];
-    U32   dwTsrTxOctet[2];
-    U32   dwTsrBroadcast[2];
-    U32   dwTsrMulticast[2];
-    U32   dwTsrDirected[2];
+	u32   dwTsrACKData[2];
+	u32   dwTsrErr[2];
+	u32   dwAllTsrOK[2];
+	u32   dwTsrRetryTimeout[2];
+	u32   dwTsrTransmitTimeout[2];
+
+	u32   dwTsrTxPacket[2];
+	u32   dwTsrTxOctet[2];
+	u32   dwTsrBroadcast[2];
+	u32   dwTsrMulticast[2];
+	u32   dwTsrDirected[2];
 
     // RD/TD count
-    U32   dwCntRxFrmLength;
-    U32   dwCntTxBufLength;
+	u32   dwCntRxFrmLength;
+	u32   dwCntTxBufLength;
 
-    U8    abyCntRxPattern[16];
-    U8    abyCntTxPattern[16];
+	u8    abyCntRxPattern[16];
+	u8    abyCntTxPattern[16];
 
     // Software check....
-    U32   dwCntRxDataErr;             // rx buffer data software compare CRC err count
-    U32   dwCntDecryptErr;            // rx buffer data software compare CRC err count
-    U32   dwCntRxICVErr;              // rx buffer data software compare CRC err count
-    U32    idxRxErrorDesc;             // index for rx data error RD
+	u32   dwCntRxDataErr;             // rx buffer data software compare CRC err count
+	u32   dwCntDecryptErr;            // rx buffer data software compare CRC err count
+	u32   dwCntRxICVErr;              // rx buffer data software compare CRC err count
+	u32    idxRxErrorDesc;             // index for rx data error RD
 
     // 64-bit OID
-    U32   ullTsrOK[2];
+	u32   ullTsrOK[2];
 
     // for some optional OIDs (64 bits) and DMI support
-    U32   ullTxBroadcastFrames[2];
-    U32   ullTxMulticastFrames[2];
-    U32   ullTxDirectedFrames[2];
-    U32   ullTxBroadcastBytes[2];
-    U32   ullTxMulticastBytes[2];
-    U32   ullTxDirectedBytes[2];
+	u32   ullTxBroadcastFrames[2];
+	u32   ullTxMulticastFrames[2];
+	u32   ullTxDirectedFrames[2];
+	u32   ullTxBroadcastBytes[2];
+	u32   ullTxMulticastBytes[2];
+	u32   ullTxDirectedBytes[2];
 } SStatMIBCount, *PSStatMIBCount;
 
 
 typedef struct tagSNodeItem {
     // STA info
-    U16            wAID;
-    U8             abyMACAddr[6];
-    U16            wTxDataRate;
-    U16            wInActiveCount;
-    U16            wEnQueueCnt;
-    U16            wFlags;
-    BOOL           bPWBitOn;
-    U8             byKeyIndex;
-    U16            wWepKeyLength;
-    U8            abyWepKey[WEP_KEYMAXLEN];
+    u16            wAID;
+    u8             abyMACAddr[6];
+    u16            wTxDataRate;
+    u16            wInActiveCount;
+    u16            wEnQueueCnt;
+    u16            wFlags;
+    bool bPWBitOn;
+    u8             byKeyIndex;
+    u16            wWepKeyLength;
+    u8            abyWepKey[WEP_KEYMAXLEN];
     // Auto rate fallback vars
-    BOOL           bIsInFallback;
-    U32            uTxFailures;
-    U32            uTxAttempts;
-    U16            wFailureRatio;
+    bool bIsInFallback;
+    u32            uTxFailures;
+    u32            uTxAttempts;
+    u16            wFailureRatio;
 
 } SNodeItem;
 
 
 typedef struct tagSNodeList {
 
-	U32		    uItem;
+	u32		    uItem;
 	SNodeItem	sNodeList[0];
 
 } SNodeList, *PSNodeList;
@@ -383,7 +382,7 @@ typedef struct tagSNodeList {
 
 typedef struct tagSCmdValue {
 
-    U32     dwValue;
+	u32 dwValue;
 
 } SCmdValue,  *PSCmdValue;
 
@@ -418,46 +417,46 @@ enum {
 
 
 struct viawget_hostapd_param {
-	U32 cmd;
-	U8 sta_addr[6];
+	u32 cmd;
+	u8 sta_addr[6];
 	union {
 		struct {
-			U16 aid;
-			U16 capability;
-			U8 tx_supp_rates;
+			u16 aid;
+			u16 capability;
+			u8 tx_supp_rates;
 		} add_sta;
 		struct {
-			U32 inactive_sec;
+			u32 inactive_sec;
 		} get_info_sta;
 		struct {
-			U8 alg;
-			U32 flags;
-			U32 err;
-			U8 idx;
-			U8 seq[8];
-			U16 key_len;
-			U8 key[0];
+			u8 alg;
+			u32 flags;
+			u32 err;
+			u8 idx;
+			u8 seq[8];
+			u16 key_len;
+			u8 key[0];
 		} crypt;
 		struct {
-			U32 flags_and;
-			U32 flags_or;
+			u32 flags_and;
+			u32 flags_or;
 		} set_flags_sta;
 		struct {
-			U16 rid;
-			U16 len;
-			U8 data[0];
+			u16 rid;
+			u16 len;
+			u8 data[0];
 		} rid;
 		struct {
-			U8 len;
-			U8 data[0];
+			u8 len;
+			u8 data[0];
 		} generic_elem;
 		struct {
-			U16 cmd;
-			U16 reason_code;
+			u16 cmd;
+			u16 reason_code;
 		} mlme;
 		struct {
-			U8 ssid_len;
-			U8 ssid[32];
+			u8 ssid_len;
+			u8 ssid[32];
 		} scan_req;
 	} u;
 };
diff --git a/drivers/staging/vt6655/ioctl.c b/drivers/staging/vt6655/ioctl.c
index 404287c6025..5624a41e3d5 100644
--- a/drivers/staging/vt6655/ioctl.c
+++ b/drivers/staging/vt6655/ioctl.c
@@ -70,16 +70,16 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     SNodeList           sNodeList;
     PSBSSIDList         pList;
     PSNodeList          pNodeList;
-    UINT                cbListCount;
+    unsigned int cbListCount;
     PKnownBSS           pBSS;
     PKnownNodeDB        pNode;
-    UINT                ii, jj;
+    unsigned int ii, jj;
     SCmdLinkStatus      sLinkStatus;
-    BYTE                abySuppRates[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
-    BYTE                abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-    DWORD               dwKeyIndex= 0;
-    BYTE                abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    LONG                ldBm;
+    unsigned char abySuppRates[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+    unsigned char abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    unsigned long dwKeyIndex= 0;
+    unsigned char abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    long                ldBm;
 
     pReq->wResult = 0;
 
@@ -99,17 +99,17 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             memcpy(abyScanSSID, pItemSSID, pItemSSID->len + WLAN_IEHDR_LEN);
         }
 
-        if (pDevice->bMACSuspend == TRUE) {
-            if (pDevice->bRadioOff == TRUE)
+        if (pDevice->bMACSuspend == true) {
+            if (pDevice->bRadioOff == true)
                 CARDbRadioPowerOn(pDevice);
             vMgrTimerInit(pDevice);
             MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
             add_timer(&pMgmt->sTimerSecondCallback);
-            pDevice->bMACSuspend = FALSE;
+            pDevice->bMACSuspend = false;
         }
         spin_lock_irq(&pDevice->lock);
         if (memcmp(pMgmt->abyCurrBSSID, &abyNullAddr[0], 6) == 0)
-            BSSvClearBSSList((void *)pDevice, FALSE);
+            BSSvClearBSSList((void *)pDevice, false);
         else
             BSSvClearBSSList((void *)pDevice, pDevice->bLinkPass);
 
@@ -130,7 +130,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 			break;
 		};
 
-          if(sZoneTypeCmd.bWrite==TRUE) {
+          if(sZoneTypeCmd.bWrite==true) {
 	  //////write zonetype
                 if(sZoneTypeCmd.ZoneType == ZoneType_USA) {
                   //set to USA
@@ -147,7 +147,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             }
 	else {
           ///////read zonetype
-	  BYTE                       zonetype=0;
+	  unsigned char zonetype=0;
 
 
            if(zonetype == 0x00)  { //USA
@@ -174,13 +174,13 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 
     case WLAN_CMD_BSS_JOIN:
 
-        if (pDevice->bMACSuspend == TRUE) {
-            if (pDevice->bRadioOff == TRUE)
+        if (pDevice->bMACSuspend == true) {
+            if (pDevice->bRadioOff == true)
                 CARDbRadioPowerOn(pDevice);
             vMgrTimerInit(pDevice);
             MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
             add_timer(&pMgmt->sTimerSecondCallback);
-            pDevice->bMACSuspend = FALSE;
+            pDevice->bMACSuspend = false;
         }
 
         if (copy_from_user(&sJoinCmd, pReq->data, sizeof(SCmdBSSJoin))) {
@@ -199,7 +199,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 	        pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
 	        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "ioct set to STA mode\n");
 	    }
-	    if (sJoinCmd.bPSEnable == TRUE) {
+	    if (sJoinCmd.bPSEnable == true) {
             pDevice->ePSMode = WMAC_POWER_FAST;
 //            pDevice->ePSMode = WMAC_POWER_MAX;
             pMgmt->wListenInterval = 2;
@@ -211,12 +211,12 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Power Saving Off \n");
         }
 
-        if (sJoinCmd.bShareKeyAuth == TRUE){
-            pMgmt->bShareKeyAlgorithm = TRUE;
+        if (sJoinCmd.bShareKeyAuth == true){
+            pMgmt->bShareKeyAlgorithm = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key \n");
         }
         else {
-            pMgmt->bShareKeyAlgorithm = FALSE;
+            pMgmt->bShareKeyAlgorithm = false;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System \n");
         }
 	    pDevice->uChannel = sJoinCmd.uChannel;
@@ -235,8 +235,8 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 			result = -EFAULT;
 			break;
 		};
-	    if (sWEPCmd.bEnableWep != TRUE) {
-            pDevice->bEncryptionEnable = FALSE;
+	    if (sWEPCmd.bEnableWep != true) {
+            pDevice->bEncryptionEnable = false;
             pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
             MACvDisableDefaultKey(pDevice->PortOffset);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WEP function disable. \n");
@@ -257,15 +257,15 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
                                     dwKeyIndex,
                                     sWEPCmd.auWepKeyLength[ii],
                                     NULL,
-                                    (PBYTE)&sWEPCmd.abyWepKey[ii][0],
+                                    (unsigned char *)&sWEPCmd.abyWepKey[ii][0],
                                     KEY_CTL_WEP,
                                     pDevice->PortOffset,
                                     pDevice->byLocalID);
             }
         }
         pDevice->byKeyIndex = sWEPCmd.byKeyIndex;
-        pDevice->bTransmitKey = TRUE;
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bTransmitKey = true;
+        pDevice->bEncryptionEnable = true;
         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
 
         break;
@@ -286,8 +286,8 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             sLinkStatus.byState = ADHOC_STARTED;
 
         sLinkStatus.uChannel = pMgmt->uCurrChannel;
-        if (pDevice->bLinkPass == TRUE) {
-            sLinkStatus.bLink = TRUE;
+        if (pDevice->bLinkPass == true) {
+            sLinkStatus.bLink = true;
  		    pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
 		    memcpy(sLinkStatus.abySSID, pItemSSID->abySSID, pItemSSID->len);
 		    memcpy(sLinkStatus.abyBSSID, pMgmt->abyCurrBSSID, WLAN_BSSID_LEN);
@@ -295,7 +295,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" Link Success ! \n");
         }
         else {
-            sLinkStatus.bLink = FALSE;
+            sLinkStatus.bLink = false;
         }
         if (copy_to_user(pReq->data, &sLinkStatus, sizeof(SCmdLinkStatus))) {
 			result = -EFAULT;
@@ -340,8 +340,8 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     		    pList->sBSSIDList[ii].wBeaconInterval = pBSS->wBeaconInterval;
     		    pList->sBSSIDList[ii].wCapInfo = pBSS->wCapInfo;
 //    		    pList->sBSSIDList[ii].uRSSI = pBSS->uRSSI;
-    		    RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
-    		    pList->sBSSIDList[ii].uRSSI = (UINT)ldBm;
+    		    RFvRSSITodBm(pDevice, (unsigned char)(pBSS->uRSSI), &ldBm);
+    		    pList->sBSSIDList[ii].uRSSI = (unsigned int)ldBm;
     		    memcpy(pList->sBSSIDList[ii].abyBSSID, pBSS->abyBSSID, WLAN_BSSID_LEN);
     		    pItemSSID = (PWLAN_IE_SSID)pBSS->abySSID;
     		    memset(pList->sBSSIDList[ii].abySSID, 0, WLAN_SSID_MAXLEN + 1);
@@ -353,10 +353,10 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     		        pList->sBSSIDList[ii].byNetType = ADHOC;
     		    }
     		    if (WLAN_GET_CAP_INFO_PRIVACY(pBSS->wCapInfo)) {
-    		        pList->sBSSIDList[ii].bWEPOn = TRUE;
+    		        pList->sBSSIDList[ii].bWEPOn = true;
                 }
                 else {
-    		        pList->sBSSIDList[ii].bWEPOn = FALSE;
+    		        pList->sBSSIDList[ii].bWEPOn = false;
     		    }
     		    ii ++;
     		    if (ii >= pList->uItem)
@@ -391,16 +391,16 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
         netif_stop_queue(pDevice->dev);
 
         spin_lock_irq(&pDevice->lock);
-        if (pDevice->bRadioOff == FALSE) {
+        if (pDevice->bRadioOff == false) {
             CARDbRadioPowerOff(pDevice);
         }
-        pDevice->bLinkPass = FALSE;
+        pDevice->bLinkPass = false;
         memset(pMgmt->abyCurrBSSID, 0, 6);
         pMgmt->eCurrState = WMAC_STATE_IDLE;
         del_timer(&pDevice->sTimerCommand);
         del_timer(&pMgmt->sTimerSecondCallback);
-        pDevice->bCmdRunning = FALSE;
-        pDevice->bMACSuspend = TRUE;
+        pDevice->bCmdRunning = false;
+        pDevice->bMACSuspend = true;
         MACvIntDisable(pDevice->PortOffset);
         spin_unlock_irq(&pDevice->lock);
 
@@ -410,13 +410,13 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_START_MAC\n");
 
-        if (pDevice->bMACSuspend == TRUE) {
-            if (pDevice->bRadioOff == TRUE)
+        if (pDevice->bMACSuspend == true) {
+            if (pDevice->bRadioOff == true)
                 CARDbRadioPowerOn(pDevice);
             vMgrTimerInit(pDevice);
             MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
             add_timer(&pMgmt->sTimerSecondCallback);
-            pDevice->bMACSuspend = FALSE;
+            pDevice->bMACSuspend = false;
         }
         break;
 
@@ -458,11 +458,11 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 		};
 
 		if (sValue.dwValue == 1) {
-            pDevice->bEnable8021x = TRUE;
+            pDevice->bEnable8021x = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable 802.1x\n");
         }
         else {
-            pDevice->bEnable8021x = FALSE;
+            pDevice->bEnable8021x = false;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable 802.1x\n");
         }
 
@@ -478,11 +478,11 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 		};
 
 		if (sValue.dwValue == 1) {
-            pDevice->bEnableHostWEP = TRUE;
+            pDevice->bEnableHostWEP = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable HostWEP\n");
         }
         else {
-            pDevice->bEnableHostWEP = FALSE;
+            pDevice->bEnableHostWEP = false;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable HostWEP\n");
         }
 
@@ -498,11 +498,11 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 		if (sValue.dwValue == 1) {
                      DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "up wpadev\n");
 		   memcpy(pDevice->wpadev->dev_addr, pDevice->dev->dev_addr, ETH_ALEN);
-		   pDevice->bWPADEVUp = TRUE;
+		   pDevice->bWPADEVUp = true;
         }
         else {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "close wpadev\n");
-	   pDevice->bWPADEVUp = FALSE;
+	   pDevice->bWPADEVUp = false;
         }
 
         break;
@@ -510,7 +510,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     case WLAN_CMD_AP_START:
 
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WLAN_CMD_AP_START\n");
-        if (pDevice->bRadioOff == TRUE) {
+        if (pDevice->bRadioOff == true) {
             CARDbRadioPowerOn(pDevice);
             vMgrTimerInit(pDevice);
             MACvIntEnable(pDevice->PortOffset, IMR_MASK_VALUE);
@@ -554,12 +554,12 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
         else
             pMgmt->wIBSSBeaconPeriod = 100;
 
-        if (sStartAPCmd.bShareKeyAuth == TRUE){
-            pMgmt->bShareKeyAlgorithm = TRUE;
+        if (sStartAPCmd.bShareKeyAuth == true){
+            pMgmt->bShareKeyAlgorithm = true;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Share Key \n");
         }
         else {
-            pMgmt->bShareKeyAlgorithm = FALSE;
+            pMgmt->bShareKeyAlgorithm = false;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Open System \n");
         }
         memcpy(pMgmt->abyIBSSSuppRates, abySuppRates, 6);
@@ -635,9 +635,9 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     		    pNodeList->sNodeList[jj].wAID = pNode->wAID;
     		    memcpy(pNodeList->sNodeList[jj].abyMACAddr, pNode->abyMACAddr, WLAN_ADDR_LEN);
     		    pNodeList->sNodeList[jj].wTxDataRate = pNode->wTxDataRate;
-    		    pNodeList->sNodeList[jj].wInActiveCount = (WORD)pNode->uInActiveCount;
-    		    pNodeList->sNodeList[jj].wEnQueueCnt = (WORD)pNode->wEnQueueCnt;
-    		    pNodeList->sNodeList[jj].wFlags = (WORD)pNode->dwFlags;
+    		    pNodeList->sNodeList[jj].wInActiveCount = (unsigned short)pNode->uInActiveCount;
+    		    pNodeList->sNodeList[jj].wEnQueueCnt = (unsigned short)pNode->wEnQueueCnt;
+    		    pNodeList->sNodeList[jj].wFlags = (unsigned short)pNode->dwFlags;
     		    pNodeList->sNodeList[jj].bPWBitOn = pNode->bPSEnable;
     		    pNodeList->sNodeList[jj].byKeyIndex = pNode->byKeyIndex;
     		    pNodeList->sNodeList[jj].wWepKeyLength = pNode->uWepKeyLength;
@@ -652,7 +652,7 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
     		    pNodeList->sNodeList[jj].bIsInFallback = pNode->bIsInFallback;
     		    pNodeList->sNodeList[jj].uTxFailures = pNode->uTxFailures;
     		    pNodeList->sNodeList[jj].uTxAttempts = pNode->uTxAttempts;
-    		    pNodeList->sNodeList[jj].wFailureRatio = (WORD)pNode->uFailureRatio;
+    		    pNodeList->sNodeList[jj].wFailureRatio = (unsigned short)pNode->uFailureRatio;
     		    jj ++;
     		    if (jj >= pNodeList->uItem)
     		        break;
@@ -672,14 +672,14 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 	    wpa_Result.proto = 0;
 	    wpa_Result.key_mgmt = 0;
 	    wpa_Result.eap_type = 0;
-	    wpa_Result.authenticated = FALSE;
-	      pDevice->fWPA_Authened = FALSE;
+	    wpa_Result.authenticated = false;
+	      pDevice->fWPA_Authened = false;
         if (copy_from_user(&wpa_Result, pReq->data, sizeof(wpa_Result))) {
             result = -EFAULT;
 			break;
 		}
 
-if(wpa_Result.authenticated==TRUE) {
+if(wpa_Result.authenticated==true) {
    #ifdef SndEvt_ToAPI
    {
      union iwreq_data      wrqu;
@@ -692,7 +692,7 @@ if(wpa_Result.authenticated==TRUE) {
      wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
    }
    #endif
-         pDevice->fWPA_Authened = TRUE;           //is successful peer to wpa_Result.authenticated?
+         pDevice->fWPA_Authened = true;           //is successful peer to wpa_Result.authenticated?
 }
 
         //printk("get private wpa_supplicant announce WPA SM\n");
@@ -700,7 +700,7 @@ if(wpa_Result.authenticated==TRUE) {
 	//printk("wpa-->proto=%d\n",wpa_Result.proto);
 	//printk("wpa-->key-mgmt=%d\n",wpa_Result.key_mgmt);
 	//printk("wpa-->eap_type=%d\n",wpa_Result.eap_type);
-	//printk("wpa-->authenticated is %s\n",(wpa_Result.authenticated==TRUE)?"TRUE":"FALSE");
+	//printk("wpa-->authenticated is %s\n",(wpa_Result.authenticated==true)?"true":"false");
 
 	pReq->wResult = 0;
         break;
@@ -717,9 +717,9 @@ if(wpa_Result.authenticated==TRUE) {
 void
 vConfigWEPKey (
     PSDevice pDevice,
-    DWORD    dwKeyIndex,
-    PBYTE    pbyKey,
-    ULONG    uKeyLength
+    unsigned long dwKeyIndex,
+    unsigned char *pbyKey,
+    unsigned long uKeyLength
     )
 {
     int ii;
@@ -728,15 +728,15 @@ vConfigWEPKey (
     memset(&pDevice->abyWepKey[dwKeyIndex][0], 0, WLAN_WEPMAX_KEYLEN);
     memcpy(&pDevice->abyWepKey[dwKeyIndex][0], pbyKey, uKeyLength);
 
-    pDevice->bWepKeyAvailable[dwKeyIndex] = TRUE;
+    pDevice->bWepKeyAvailable[dwKeyIndex] = true;
     pDevice->auWepKeyLength[dwKeyIndex] = uKeyLength;
 
     MACvSetDefaultKeyEntry(pDevice->PortOffset, uKeyLength, dwKeyIndex,
-                           (PDWORD) &(pDevice->abyWepKey[dwKeyIndex][0]), pDevice->byLocalID);
+                           (unsigned long *) &(pDevice->abyWepKey[dwKeyIndex][0]), pDevice->byLocalID);
 
     if (pDevice->eEncryptionStatus < Ndis802_11EncryptionNotSupported) {
         for(ii=0; ii<MAX_GROUP_KEY; ii++) {
-            if ((pDevice->bWepKeyAvailable[ii] == TRUE) &&
+            if ((pDevice->bWepKeyAvailable[ii] == true) &&
                 (pDevice->auWepKeyLength[ii] == WLAN_WEP232_KEYLEN)) {
                 pDevice->uCurrentWEPMode = TX_WEP_SW232;
                 MACvDisableDefaultKey(pDevice->PortOffset);
diff --git a/drivers/staging/vt6655/ioctl.h b/drivers/staging/vt6655/ioctl.h
index 0d10c2a923c..ba85015c11b 100644
--- a/drivers/staging/vt6655/ioctl.h
+++ b/drivers/staging/vt6655/ioctl.h
@@ -45,9 +45,9 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq);
 /*
 void vConfigWEPKey (
     PSDevice pDevice,
-    DWORD    dwKeyIndex,
-    PBYTE    pbyKey,
-    ULONG    uKeyLength
+    unsigned long dwKeyIndex,
+    unsigned char *pbyKey,
+    unsigned long uKeyLength
     );
 */
 
diff --git a/drivers/staging/vt6655/iwctl.c b/drivers/staging/vt6655/iwctl.c
index cf69034fc0f..43227617aab 100644
--- a/drivers/staging/vt6655/iwctl.c
+++ b/drivers/staging/vt6655/iwctl.c
@@ -45,7 +45,7 @@
 #endif
 
 #include <net/iw_handler.h>
-extern WORD TxRate_iwconfig;//2008-5-8 <add> by chester
+extern unsigned short TxRate_iwconfig;//2008-5-8 <add> by chester
 
 /*---------------------  Static Definitions -------------------------*/
 
@@ -99,16 +99,16 @@ struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev)
 	       else
 		   pDevice->scStatistic.LinkQuality = (96-pDevice->byCurrSQ)*100/76;
 	   }
-	   if(pDevice->bLinkPass !=TRUE)
+	   if(pDevice->bLinkPass !=true)
 	       pDevice->scStatistic.LinkQuality = 0;
 	  #endif
 	   if(pDevice->scStatistic.LinkQuality > 100)
    	       pDevice->scStatistic.LinkQuality = 100;
-               pDevice->wstats.qual.qual =(BYTE) pDevice->scStatistic.LinkQuality;
+               pDevice->wstats.qual.qual =(unsigned char) pDevice->scStatistic.LinkQuality;
 	#else
 	pDevice->wstats.qual.qual = pDevice->byCurrSQ;
 	#endif
-	RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+	RFvRSSITodBm(pDevice, (unsigned char)(pDevice->uCurrRSSI), &ldBm);
 	pDevice->wstats.qual.level = ldBm;
 	//pDevice->wstats.qual.level = 0x100 - pDevice->uCurrRSSI;
 	pDevice->wstats.qual.noise = 0;
@@ -116,7 +116,7 @@ struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev)
 	pDevice->wstats.discard.nwid = 0;
 	pDevice->wstats.discard.code = 0;
 	pDevice->wstats.discard.fragment = 0;
-	pDevice->wstats.discard.retries = (U32)pDevice->scStatistic.dwTsrErr;
+	pDevice->wstats.discard.retries = (unsigned long)pDevice->scStatistic.dwTsrErr;
 	pDevice->wstats.discard.misc = 0;
 	pDevice->wstats.miss.beacon = 0;
 
@@ -175,7 +175,7 @@ int iwctl_siwscan(struct net_device *dev,
 	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
 	 PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
 	struct iw_scan_req  *req = (struct iw_scan_req *)extra;
-	BYTE                abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+	unsigned char abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
 	PWLAN_IE_SSID       pItemSSID=NULL;
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWSCAN \n");
 
@@ -309,7 +309,7 @@ int iwctl_giwscan(struct net_device *dev,
        		//ADD quality
             memset(&iwe, 0, sizeof(iwe));
 	        iwe.cmd = IWEVQUAL;
-	        RFvRSSITodBm(pDevice, (BYTE)(pBSS->uRSSI), &ldBm);
+	        RFvRSSITodBm(pDevice, (unsigned char)(pBSS->uRSSI), &ldBm);
 		    iwe.u.qual.level = ldBm;
 	        iwe.u.qual.noise = 0;
 //2008-0409-01, <Add> by Einsn Liu
@@ -426,7 +426,7 @@ int iwctl_siwfreq(struct net_device *dev,
 			  pDevice->uChannel = channel;
  			 //2007-0207-04,<Add> by EinsnLiu
 			 //Make change effect at once
-			  pDevice->bCommit = TRUE;
+			  pDevice->bCommit = true;
 		}
 	}
 
@@ -489,7 +489,7 @@ int iwctl_siwmode(struct net_device *dev,
 	    if (pMgmt->eConfigMode != WMAC_CONFIG_IBSS_STA) {
             pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;
             if (pDevice->flags & DEVICE_FLAGS_OPENED) {
-		        pDevice->bCommit = TRUE;
+		        pDevice->bCommit = true;
    		    }
 		}
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to ad-hoc \n");
@@ -499,7 +499,7 @@ int iwctl_siwmode(struct net_device *dev,
 	    if (pMgmt->eConfigMode != WMAC_CONFIG_ESS_STA) {
             pMgmt->eConfigMode = WMAC_CONFIG_ESS_STA;
             if (pDevice->flags & DEVICE_FLAGS_OPENED) {
-		        pDevice->bCommit = TRUE;
+		        pDevice->bCommit = true;
    		    }
 		}
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to infrastructure \n");
@@ -513,7 +513,7 @@ int iwctl_siwmode(struct net_device *dev,
 	    if (pMgmt->eConfigMode != WMAC_CONFIG_AP) {
             pMgmt->eConfigMode = WMAC_CONFIG_AP;
             if (pDevice->flags & DEVICE_FLAGS_OPENED) {
-		        pDevice->bCommit = TRUE;
+		        pDevice->bCommit = true;
    		    }
 		}
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "set mode to Access Point \n");
@@ -577,7 +577,7 @@ int iwctl_giwrange(struct net_device *dev,
 {
 	struct iw_range *range = (struct iw_range *) extra;
 	int		i,k;
-    BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+    unsigned char abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
 
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRANGE \n");
@@ -688,7 +688,7 @@ int iwctl_siwap(struct net_device *dev,
 	PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
     PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
     int rc = 0;
-    BYTE                 ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
+    unsigned char ZeroBSSID[WLAN_BSSID_LEN]={0x00,0x00,0x00,0x00,0x00,0x00};
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWAP \n");
 if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
@@ -701,12 +701,12 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
 	else {
 		memcpy(pMgmt->abyDesireBSSID, wrq->sa_data, 6);
 		                //2008-0409-05, <Add> by Einsn Liu
-		if((pDevice->bLinkPass == TRUE) &&
+		if((pDevice->bLinkPass == true) &&
                      (memcmp(pMgmt->abyDesireBSSID, pMgmt->abyCurrBSSID, 6)== 0)){
 			return rc;
 			}
 	//mike :add
-	 if ((IS_BROADCAST_ADDRESS(pMgmt->abyDesireBSSID)) ||
+	 if ((is_broadcast_ether_addr(pMgmt->abyDesireBSSID)) ||
 	     (memcmp(pMgmt->abyDesireBSSID, ZeroBSSID, 6) == 0)){
 	      PRINT_K("SIOCSIWAP:invalid desired BSSID return!\n");
                return rc;
@@ -714,10 +714,10 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
        //mike add: if desired AP is hidden ssid(there are two same BSSID in list),
        //                  then ignore,because you don't known which one to be connect with??
        	{
-           UINT            ii , uSameBssidNum=0;
+           unsigned int ii , uSameBssidNum=0;
                   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
                      if (pMgmt->sBSSList[ii].bActive &&
-                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID,pMgmt->abyDesireBSSID)) {
+                        !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyDesireBSSID)) {
                         uSameBssidNum++;
                      }
                   }
@@ -728,7 +728,7 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
        	}
 
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
-		    pDevice->bCommit = TRUE;
+		    pDevice->bCommit = true;
    		}
 	}
 	return rc;
@@ -751,7 +751,7 @@ int iwctl_giwap(struct net_device *dev,
 
     memcpy(wrq->sa_data, pMgmt->abyCurrBSSID, 6);
    //2008-0410,<Modify> by Einsn Liu
-    if ((pDevice->bLinkPass == FALSE) && (pMgmt->eCurrMode != WMAC_MODE_ESS_AP))
+    if ((pDevice->bLinkPass == false) && (pMgmt->eCurrMode != WMAC_MODE_ESS_AP))
         memset(wrq->sa_data, 0, 6);
 
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
@@ -830,11 +830,11 @@ int iwctl_siwessid(struct net_device *dev,
     PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
     PWLAN_IE_SSID       pItemSSID;
   //2008-0409-05, <Add> by Einsn Liu
-    BYTE  len;
+    unsigned char len;
 
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWESSID \n");
- pDevice->fWPA_Authened = FALSE;
+ pDevice->fWPA_Authened = false;
 if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
         // In scanning..
      printk("SIOCSIWESSID(??)-->In scanning...\n");
@@ -848,7 +848,7 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
 	    PRINT_K("set essid to 'any' \n");
            #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
              //Unknown desired AP,so here need not associate??
-            //if(pDevice->bWPASuppWextEnabled == TRUE)  {
+            //if(pDevice->bWPASuppWextEnabled == true)  {
                   return 0;
             // }
             #endif
@@ -868,7 +868,7 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
 	printk("set essid to %s \n",pItemSSID->abySSID);
 		//2008-0409-05, <Add> by Einsn Liu
        len=(pItemSSID->len > ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len)?pItemSSID->len:((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len;
-   if((pDevice->bLinkPass == TRUE) &&
+   if((pDevice->bLinkPass == true) &&
   	(memcmp(pItemSSID->abySSID,((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID,len)==0))
          return 0;
 
@@ -881,12 +881,12 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
 #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
  //Wext wil order another command of siwap to link with desired AP,
  //so here need not associate??
-  if(pDevice->bWPASuppWextEnabled == TRUE)  {
+  if(pDevice->bWPASuppWextEnabled == true)  {
         /*******search if  in hidden ssid mode ****/
         {
            PKnownBSS       pCurr = NULL;
-           BYTE                   abyTmpDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-	  UINT            ii , uSameBssidNum=0;
+           unsigned char abyTmpDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+	  unsigned int ii , uSameBssidNum=0;
 
 	  memcpy(abyTmpDesireSSID,pMgmt->abyDesireSSID,sizeof(abyTmpDesireSSID));
             pCurr = BSSpSearchBSSList(pDevice,
@@ -906,7 +906,7 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
                      //         by means of judging if there are two same BSSID exist in list ?
                   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
                      if (pMgmt->sBSSList[ii].bActive &&
-                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+                        !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
                         uSameBssidNum++;
                      }
                   }
@@ -927,7 +927,7 @@ if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
 	}
 
     if (pDevice->flags & DEVICE_FLAGS_OPENED) {
-	    pDevice->bCommit = TRUE;
+	    pDevice->bCommit = true;
 	}
 
 
@@ -981,7 +981,7 @@ int iwctl_siwrate(struct net_device *dev,
     int rc = 0;
 	u8	brate = 0;
 	int	i;
-	BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+	unsigned char abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
 
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWRATE \n");
@@ -1033,7 +1033,7 @@ int iwctl_siwrate(struct net_device *dev,
 		// Fixed mode
 		// One rate, fixed
 	printk("Rate Fix\n");
-		pDevice->bFixRate = TRUE;
+		pDevice->bFixRate = true;
         if ((pDevice->byBBType == BB_TYPE_11B)&& (brate > 3)) {
 	    pDevice->uConnectionRate = 3;
         }
@@ -1044,7 +1044,7 @@ int iwctl_siwrate(struct net_device *dev,
 
 	}
 	else {
-        pDevice->bFixRate = FALSE;
+        pDevice->bFixRate = false;
         pDevice->uConnectionRate = 13;
 	printk("auto rate:connection_rate is 13\n");
      }
@@ -1068,11 +1068,11 @@ int iwctl_giwrate(struct net_device *dev,
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRATE \n");
     {
-        BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
+        unsigned char abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
 	    int brate = 0;
 //2008-5-8 <modify> by chester
 if(pDevice->bLinkPass){
-if(pDevice->bFixRate == TRUE){
+if(pDevice->bFixRate == true){
 		if (pDevice->uConnectionRate < 13) {
 	        brate = abySupportedRates[pDevice->uConnectionRate];
 	    }else {
@@ -1108,8 +1108,8 @@ else brate =0;
 //                brate = abySupportedRates[pDevice->wCurrentRate];
 	    wrq->value = brate * 500000;
 	    // If more than one rate, set auto
-	    if (pDevice->bFixRate == TRUE)
-	        wrq->fixed = TRUE;
+	    if (pDevice->bFixRate == true)
+	        wrq->fixed = true;
     }
 
 
@@ -1294,7 +1294,7 @@ int iwctl_siwencode(struct net_device *dev,
 {
     PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
     PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
-	DWORD dwKeyIndex = (DWORD)(wrq->flags & IW_ENCODE_INDEX);
+	unsigned long dwKeyIndex = (unsigned long)(wrq->flags & IW_ENCODE_INDEX);
 	int ii,uu, rc = 0;
 	int index = (wrq->flags & IW_ENCODE_INDEX);
 
@@ -1358,7 +1358,7 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
             spin_lock_irq(&pDevice->lock);
             KeybSetDefaultKey(&(pDevice->sKey),
-                            (DWORD)(dwKeyIndex | (1 << 31)),
+                            (unsigned long)(dwKeyIndex | (1 << 31)),
                            	wrq->length,
                             NULL,
                             pDevice->abyKey,
@@ -1368,38 +1368,38 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
                           );
             spin_unlock_irq(&pDevice->lock);
         }
-        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+        pDevice->byKeyIndex = (unsigned char)dwKeyIndex;
         pDevice->uKeyLength = wrq->length;
-        pDevice->bTransmitKey = TRUE;
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bTransmitKey = true;
+        pDevice->bEncryptionEnable = true;
         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
 
 		}else if(index>0){
 	//when the length is 0 the request only changes the default transmit key index
 	//check the new key has a non zero lenget
-	if(pDevice->bEncryptionEnable==FALSE)
+	if(pDevice->bEncryptionEnable==false)
 	{
 		rc = -EINVAL;
         	return rc;
 	}
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Just set Default key Index:\n");
 	pkeytab=&(pDevice->sKey.KeyTable[MAX_KEY_TABLE-1]);
-	if(pkeytab->GroupKey[(BYTE)dwKeyIndex].uKeyLength==0){
+	if(pkeytab->GroupKey[(unsigned char)dwKeyIndex].uKeyLength==0){
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Default key len is 0\n");
 		rc = -EINVAL;
       	  	return rc;
 		}
-	 pDevice->byKeyIndex =(BYTE)dwKeyIndex;
+	 pDevice->byKeyIndex =(unsigned char)dwKeyIndex;
 	 pkeytab->dwGTKeyIndex =dwKeyIndex | (1 << 31);
-	 pkeytab->GroupKey[(BYTE)dwKeyIndex].dwKeyIndex=dwKeyIndex | (1 << 31);
+	 pkeytab->GroupKey[(unsigned char)dwKeyIndex].dwKeyIndex=dwKeyIndex | (1 << 31);
 	}
 
 }else {//disable the key
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable WEP function\n");
-	if(pDevice->bEncryptionEnable==FALSE)
+	if(pDevice->bEncryptionEnable==false)
 		return 0;
-	pMgmt->bShareKeyAlgorithm = FALSE;
-        pDevice->bEncryptionEnable = FALSE;
+	pMgmt->bShareKeyAlgorithm = false;
+        pDevice->bEncryptionEnable = false;
         pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
             spin_lock_irq(&pDevice->lock);
@@ -1450,7 +1450,7 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
             spin_lock_irq(&pDevice->lock);
             KeybSetDefaultKey(&(pDevice->sKey),
-                            (DWORD)(pDevice->byKeyIndex | (1 << 31)),
+                            (unsigned long)(pDevice->byKeyIndex | (1 << 31)),
                             pDevice->uKeyLength,
                             NULL,
                             pDevice->abyKey,
@@ -1460,10 +1460,10 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
                           );
             spin_unlock_irq(&pDevice->lock);
         }
-        pDevice->byKeyIndex = (BYTE)dwKeyIndex;
+        pDevice->byKeyIndex = (unsigned char)dwKeyIndex;
         pDevice->uKeyLength = wrq->length;
-        pDevice->bTransmitKey = TRUE;
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bTransmitKey = true;
+        pDevice->bEncryptionEnable = true;
         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
 
 		// Do we want to just set the transmit key index ?
@@ -1479,8 +1479,8 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
 	if(wrq->flags & IW_ENCODE_DISABLED){
 
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disable WEP function\n");
-		pMgmt->bShareKeyAlgorithm = FALSE;
-        pDevice->bEncryptionEnable = FALSE;
+		pMgmt->bShareKeyAlgorithm = false;
+        pDevice->bEncryptionEnable = false;
         pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
             spin_lock_irq(&pDevice->lock);
@@ -1493,11 +1493,11 @@ if((wrq->flags & IW_ENCODE_DISABLED)==0){
 
 	if(wrq->flags & IW_ENCODE_RESTRICTED) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & ShareKey System\n");
-		pMgmt->bShareKeyAlgorithm = TRUE;
+		pMgmt->bShareKeyAlgorithm = true;
 	}
 	if(wrq->flags & IW_ENCODE_OPEN) {
 	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Enable WEP & Open System\n");
-		pMgmt->bShareKeyAlgorithm = FALSE;
+		pMgmt->bShareKeyAlgorithm = false;
 	}
 	return rc;
 }
@@ -1515,7 +1515,7 @@ int iwctl_giwencode(struct net_device *dev,
     PSMgmtObject        pMgmt = &(pDevice->sMgmtObj);
     int rc = 0;
     char abyKey[WLAN_WEP232_KEYLEN];
-	UINT index = (UINT)(wrq->flags & IW_ENCODE_INDEX);
+	unsigned int index = (unsigned int)(wrq->flags & IW_ENCODE_INDEX);
 	PSKeyItem   pKey = NULL;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODE\n");
@@ -1549,7 +1549,7 @@ int iwctl_giwencode(struct net_device *dev,
 	else
 		wrq->flags |=  IW_ENCODE_OPEN;
 
-	if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (BYTE)index , &pKey)){
+	if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (unsigned char)index , &pKey)){
         wrq->length = pKey->uKeyLength;
         memcpy(abyKey, pKey->abyKey,  pKey->uKeyLength);
 //2007-0207-06,<Modify> by EinsnLiu
@@ -1584,7 +1584,7 @@ int iwctl_giwencode(struct net_device *dev,
 	PSMgmtObject		pMgmt = &(pDevice->sMgmtObj);
 	char abyKey[WLAN_WEP232_KEYLEN];
 
-	UINT index = (UINT)(wrq->flags & IW_ENCODE_INDEX);
+	unsigned int index = (unsigned int)(wrq->flags & IW_ENCODE_INDEX);
 	PSKeyItem	pKey = NULL;
 
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWENCODE\n");
@@ -1622,7 +1622,7 @@ int iwctl_giwencode(struct net_device *dev,
 				  memcpy(abyKey, pKey->abyKey,	pKey->uKeyLength);
 				  memcpy(extra,  abyKey, WLAN_WEP232_KEYLEN);
 			   }
-	}else if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (BYTE)index , &pKey)){
+	}else if (KeybGetKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, (unsigned char)index , &pKey)){
 			wrq->length = pKey->uKeyLength;
 			memcpy(abyKey, pKey->abyKey,  pKey->uKeyLength);
 		memcpy(extra,  abyKey, WLAN_WEP232_KEYLEN);
@@ -1729,8 +1729,8 @@ int iwctl_giwsens(struct net_device *dev,
     long ldBm;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSENS \n");
-    if (pDevice->bLinkPass == TRUE) {
-        RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
+    if (pDevice->bLinkPass == true) {
+        RFvRSSITodBm(pDevice, (unsigned char)(pDevice->uCurrRSSI), &ldBm);
 	    wrq->value = ldBm;
 	}
 	else {
@@ -1763,7 +1763,7 @@ int iwctl_siwauth(struct net_device *dev,
 		wpa_version = wrq->value;
 		if(wrq->value == IW_AUTH_WPA_VERSION_DISABLED) {
 		       PRINT_K("iwctl_siwauth:set WPADEV to disable at 1??????\n");
-			//pDevice->bWPADevEnable = FALSE;
+			//pDevice->bWPADevEnable = false;
 		}
 		else if(wrq->value == IW_AUTH_WPA_VERSION_WPA) {
                           PRINT_K("iwctl_siwauth:set WPADEV to WPA1******\n");
@@ -1771,7 +1771,7 @@ int iwctl_siwauth(struct net_device *dev,
 		else {
                           PRINT_K("iwctl_siwauth:set WPADEV to WPA2******\n");
 		}
-		//pDevice->bWPASuppWextEnabled =TRUE;
+		//pDevice->bWPASuppWextEnabled =true;
 		break;
 	case IW_AUTH_CIPHER_PAIRWISE:
 		pairwise = wrq->value;
@@ -1818,9 +1818,9 @@ int iwctl_siwauth(struct net_device *dev,
 		break;
 	case IW_AUTH_80211_AUTH_ALG:
 		if(wrq->value==IW_AUTH_ALG_OPEN_SYSTEM){
-			pMgmt->bShareKeyAlgorithm=FALSE;
+			pMgmt->bShareKeyAlgorithm=false;
 		}else if(wrq->value==IW_AUTH_ALG_SHARED_KEY){
-			pMgmt->bShareKeyAlgorithm=TRUE;
+			pMgmt->bShareKeyAlgorithm=true;
 		}
 		break;
 	case IW_AUTH_WPA_ENABLED:
@@ -1833,13 +1833,13 @@ int iwctl_siwauth(struct net_device *dev,
 		break;
 	case IW_AUTH_PRIVACY_INVOKED:
 		pDevice->bEncryptionEnable = !!wrq->value;
-		if(pDevice->bEncryptionEnable == FALSE){
+		if(pDevice->bEncryptionEnable == false){
 			wpa_version = 0;
 			pairwise = 0;
 			pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
-			pMgmt->bShareKeyAlgorithm = FALSE;
-			pMgmt->eAuthenMode = FALSE;
-			//pDevice->bWPADevEnable = FALSE;
+			pMgmt->bShareKeyAlgorithm = false;
+			pMgmt->eAuthenMode = false;
+			//pDevice->bWPADevEnable = false;
 		}
 
 		break;
@@ -1852,9 +1852,9 @@ int iwctl_siwauth(struct net_device *dev,
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pairwise = %d\n",pairwise);
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->eEncryptionStatus = %d\n",pDevice->eEncryptionStatus);
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pMgmt->eAuthenMode  = %d\n",pMgmt->eAuthenMode);
-	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pMgmt->bShareKeyAlgorithm = %s\n",pMgmt->bShareKeyAlgorithm?"TRUE":"FALSE");
-	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bEncryptionEnable = %s\n",pDevice->bEncryptionEnable?"TRUE":"FALSE");
-	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bWPADevEnable = %s\n",pDevice->bWPADevEnable?"TRUE":"FALSE");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pMgmt->bShareKeyAlgorithm = %s\n",pMgmt->bShareKeyAlgorithm?"true":"false");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bEncryptionEnable = %s\n",pDevice->bEncryptionEnable?"true":"false");
+	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pDevice->bWPADevEnable = %s\n",pDevice->bWPADevEnable?"true":"false");
 */
    return ret;
 }
@@ -2055,12 +2055,12 @@ if(param->u.wpa_key.alg_name == WPA_ALG_NONE) {
 if( pDevice->bwextcount == 4) {
     printk("SIOCSIWENCODEEXT:Enable WPA WEXT SUPPORT!!!!!\n");
  pDevice->bwextcount=0;
-   pDevice->bWPASuppWextEnabled = TRUE;
+   pDevice->bWPASuppWextEnabled = true;
 		 }
 //******
 
 		spin_lock_irq(&pDevice->lock);
- ret = wpa_set_keys(pDevice, param, TRUE);
+ ret = wpa_set_keys(pDevice, param, true);
 		spin_unlock_irq(&pDevice->lock);
 
 error:
@@ -2096,10 +2096,10 @@ int iwctl_siwmlme(struct net_device *dev,
 	switch(mlme->cmd){
 	case IW_MLME_DEAUTH:
 		//this command seems to be not complete,please test it --einsnliu
-		//bScheduleCommand((void *) pDevice, WLAN_CMD_DEAUTH, (PBYTE)&reason);
+		//bScheduleCommand((void *) pDevice, WLAN_CMD_DEAUTH, (unsigned char *)&reason);
 		break;
 	case IW_MLME_DISASSOC:
-		if(pDevice->bLinkPass == TRUE){
+		if(pDevice->bLinkPass == true){
 					  printk("iwctl_siwmlme--->send DISASSOCIATE\n");
 		  //clear related flags
 		   memset(pMgmt->abyDesireBSSID, 0xFF,6);
diff --git a/drivers/staging/vt6655/key.c b/drivers/staging/vt6655/key.c
index bfc5c509d90..0ff8d7bbf2a 100644
--- a/drivers/staging/vt6655/key.c
+++ b/drivers/staging/vt6655/key.c
@@ -59,22 +59,22 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 /*---------------------  Static Functions  --------------------------*/
 static void
-s_vCheckKeyTableValid (PSKeyManagement pTable, DWORD_PTR dwIoBase)
+s_vCheckKeyTableValid (PSKeyManagement pTable, unsigned long dwIoBase)
 {
     int i;
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            (pTable->KeyTable[i].PairwiseKey.bKeyValid == FALSE) &&
-            (pTable->KeyTable[i].GroupKey[0].bKeyValid == FALSE) &&
-            (pTable->KeyTable[i].GroupKey[1].bKeyValid == FALSE) &&
-            (pTable->KeyTable[i].GroupKey[2].bKeyValid == FALSE) &&
-            (pTable->KeyTable[i].GroupKey[3].bKeyValid == FALSE)
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            (pTable->KeyTable[i].PairwiseKey.bKeyValid == false) &&
+            (pTable->KeyTable[i].GroupKey[0].bKeyValid == false) &&
+            (pTable->KeyTable[i].GroupKey[1].bKeyValid == false) &&
+            (pTable->KeyTable[i].GroupKey[2].bKeyValid == false) &&
+            (pTable->KeyTable[i].GroupKey[3].bKeyValid == false)
             ) {
 
-            pTable->KeyTable[i].bInUse = FALSE;
+            pTable->KeyTable[i].bInUse = false;
             pTable->KeyTable[i].wKeyCtl = 0;
-            pTable->KeyTable[i].bSoftWEP = FALSE;
+            pTable->KeyTable[i].bSoftWEP = false;
             MACvDisableKeyEntry(dwIoBase, i);
         }
     }
@@ -96,22 +96,22 @@ s_vCheckKeyTableValid (PSKeyManagement pTable, DWORD_PTR dwIoBase)
  * Return Value: none
  *
  */
-void KeyvInitTable (PSKeyManagement pTable, DWORD_PTR dwIoBase)
+void KeyvInitTable (PSKeyManagement pTable, unsigned long dwIoBase)
 {
     int i;
     int jj;
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        pTable->KeyTable[i].bInUse = FALSE;
-        pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+        pTable->KeyTable[i].bInUse = false;
+        pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
         pTable->KeyTable[i].PairwiseKey.pvKeyTable = (void *)&pTable->KeyTable[i];
         for (jj=0; jj < MAX_GROUP_KEY; jj++) {
-            pTable->KeyTable[i].GroupKey[jj].bKeyValid = FALSE;
+            pTable->KeyTable[i].GroupKey[jj].bKeyValid = false;
             pTable->KeyTable[i].GroupKey[jj].pvKeyTable = (void *)&pTable->KeyTable[i];
         }
         pTable->KeyTable[i].wKeyCtl = 0;
         pTable->KeyTable[i].dwGTKeyIndex = 0;
-        pTable->KeyTable[i].bSoftWEP = FALSE;
+        pTable->KeyTable[i].bSoftWEP = false;
         MACvDisableKeyEntry(dwIoBase, i);
     }
 }
@@ -128,13 +128,13 @@ void KeyvInitTable (PSKeyManagement pTable, DWORD_PTR dwIoBase)
  *  Out:
  *      pKey            - Key return
  *
- * Return Value: TRUE if found otherwise FALSE
+ * Return Value: true if found otherwise false
  *
  */
-BOOL KeybGetKey (
+bool KeybGetKey (
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
     PSKeyItem       *pKey
     )
 {
@@ -144,31 +144,31 @@ BOOL KeybGetKey (
 
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             if (dwKeyIndex == 0xFFFFFFFF) {
-                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE) {
+                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == true) {
                     *pKey = &(pTable->KeyTable[i].PairwiseKey);
-                    return (TRUE);
+                    return (true);
                 }
                 else {
-                    return (FALSE);
+                    return (false);
                 }
             } else if (dwKeyIndex < MAX_GROUP_KEY) {
-                if (pTable->KeyTable[i].GroupKey[dwKeyIndex].bKeyValid == TRUE) {
+                if (pTable->KeyTable[i].GroupKey[dwKeyIndex].bKeyValid == true) {
                     *pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex]);
-                    return (TRUE);
+                    return (true);
                 }
                 else {
-                    return (FALSE);
+                    return (false);
                 }
             }
             else {
-                return (FALSE);
+                return (false);
             }
         }
     }
-    return (FALSE);
+    return (false);
 }
 
 
@@ -186,37 +186,37 @@ BOOL KeybGetKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
-BOOL KeybSetKey (
+bool KeybSetKey (
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     )
 {
     int         i,j;
-    UINT        ii;
+    unsigned int ii;
     PSKeyItem   pKey;
-    UINT        uKeyIdx;
+    unsigned int uKeyIdx;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetKey: %lX\n", dwKeyIndex);
 
     j = (MAX_KEY_TABLE-1);
     for (i=0;i<(MAX_KEY_TABLE-1);i++) {
-        if ((pTable->KeyTable[i].bInUse == FALSE) &&
+        if ((pTable->KeyTable[i].bInUse == false) &&
             (j == (MAX_KEY_TABLE-1))) {
             // found empty table
             j = i;
         }
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             // found table already exist
             if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
                 // Pairwise key
@@ -227,7 +227,7 @@ BOOL KeybSetKey (
             } else {
                 // Group key
                 if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY)
-                    return (FALSE);
+                    return (false);
                 pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF]);
                 if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
                     // Group transmit key
@@ -241,7 +241,7 @@ BOOL KeybSetKey (
             }
             pTable->KeyTable[i].wKeyCtl |= 0x8000;              // enable on-fly
 
-            pKey->bKeyValid = TRUE;
+            pKey->bKeyValid = true;
             pKey->uKeyLength = uKeyLength;
             pKey->dwKeyIndex = dwKeyIndex;
             pKey->byCipherSuite = byKeyDecMode;
@@ -252,7 +252,7 @@ BOOL KeybSetKey (
                 if (uKeyLength == WLAN_WEP104_KEYLEN)
                     pKey->abyKey[15] |= 0x80;
             }
-            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pbyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pbyBSSID, (unsigned long *)pKey->abyKey, byLocalID);
 
             if ((dwKeyIndex & USE_KEYRSC) == 0) {
                 // RSC set by NIC
@@ -277,12 +277,12 @@ BOOL KeybSetKey (
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
 
-            return (TRUE);
+            return (true);
         }
     }
     if (j < (MAX_KEY_TABLE-1)) {
         memcpy(pTable->KeyTable[j].abyBSSID,pbyBSSID,ETH_ALEN);
-        pTable->KeyTable[j].bInUse = TRUE;
+        pTable->KeyTable[j].bInUse = true;
         if ((dwKeyIndex & PAIRWISE_KEY) != 0)  {
             // Pairwise key
             pKey = &(pTable->KeyTable[j].PairwiseKey);
@@ -292,7 +292,7 @@ BOOL KeybSetKey (
         } else {
             // Group key
             if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY)
-                return (FALSE);
+                return (false);
             pKey = &(pTable->KeyTable[j].GroupKey[dwKeyIndex & 0x000000FF]);
             if ((dwKeyIndex & TRANSMIT_KEY) != 0)  {
                 // Group transmit key
@@ -306,7 +306,7 @@ BOOL KeybSetKey (
         }
         pTable->KeyTable[j].wKeyCtl |= 0x8000;              // enable on-fly
 
-        pKey->bKeyValid = TRUE;
+        pKey->bKeyValid = true;
         pKey->uKeyLength = uKeyLength;
         pKey->dwKeyIndex = dwKeyIndex;
         pKey->byCipherSuite = byKeyDecMode;
@@ -317,7 +317,7 @@ BOOL KeybSetKey (
             if (uKeyLength == WLAN_WEP104_KEYLEN)
                 pKey->abyKey[15] |= 0x80;
         }
-        MACvSetKeyEntry(dwIoBase, pTable->KeyTable[j].wKeyCtl, j, uKeyIdx, pbyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+        MACvSetKeyEntry(dwIoBase, pTable->KeyTable[j].wKeyCtl, j, uKeyIdx, pbyBSSID, (unsigned long *)pKey->abyKey, byLocalID);
 
         if ((dwKeyIndex & USE_KEYRSC) == 0) {
             // RSC set by NIC
@@ -342,9 +342,9 @@ BOOL KeybSetKey (
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n ", pKey->wTSC15_0);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n ", pKey->dwKeyIndex);
 
-        return (TRUE);
+        return (true);
     }
-    return (FALSE);
+    return (false);
 }
 
 
@@ -359,66 +359,66 @@ BOOL KeybSetKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
-BOOL KeybRemoveKey (
+bool KeybRemoveKey (
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
-    DWORD_PTR       dwIoBase
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
+    unsigned long dwIoBase
     )
 {
     int  i;
 
-    if (IS_BROADCAST_ADDRESS(pbyBSSID)) {
+    if (is_broadcast_ether_addr(pbyBSSID)) {
         // dealte all key
         if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
             for (i=0;i<MAX_KEY_TABLE;i++) {
-                pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+                pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
             }
             s_vCheckKeyTableValid(pTable, dwIoBase);
-            return TRUE;
+            return true;
         }
         else if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
             for (i=0;i<MAX_KEY_TABLE;i++) {
-                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = false;
                 if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[i].dwGTKeyIndex & 0x7FFFFFFF)) {
                     // remove Group transmit key
                     pTable->KeyTable[i].dwGTKeyIndex = 0;
                 }
             }
             s_vCheckKeyTableValid(pTable, dwIoBase);
-            return TRUE;
+            return true;
         }
         else {
-            return FALSE;
+            return false;
         }
     }
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
-                pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+                pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
                 s_vCheckKeyTableValid(pTable, dwIoBase);
-                return (TRUE);
+                return (true);
             }
             else if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
-                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = false;
                 if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[i].dwGTKeyIndex & 0x7FFFFFFF)) {
                     // remove Group transmit key
                     pTable->KeyTable[i].dwGTKeyIndex = 0;
                 }
                 s_vCheckKeyTableValid(pTable, dwIoBase);
-                return (TRUE);
+                return (true);
             }
             else {
-                return (FALSE);
+                return (false);
             }
         }
     }
-    return (FALSE);
+    return (false);
 }
 
 
@@ -432,30 +432,30 @@ BOOL KeybRemoveKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
-BOOL KeybRemoveAllKey (
+bool KeybRemoveAllKey (
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD_PTR       dwIoBase
+    unsigned char *pbyBSSID,
+    unsigned long dwIoBase
     )
 {
     int  i,u;
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
-            pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
+            pTable->KeyTable[i].PairwiseKey.bKeyValid = false;
             for(u=0;u<MAX_GROUP_KEY;u++) {
-                pTable->KeyTable[i].GroupKey[u].bKeyValid = FALSE;
+                pTable->KeyTable[i].GroupKey[u].bKeyValid = false;
             }
             pTable->KeyTable[i].dwGTKeyIndex = 0;
             s_vCheckKeyTableValid(pTable, dwIoBase);
-            return (TRUE);
+            return (true);
         }
     }
-    return (FALSE);
+    return (false);
 }
 
 /*
@@ -467,20 +467,20 @@ BOOL KeybRemoveAllKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
 void KeyvRemoveWEPKey (
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    DWORD_PTR       dwIoBase
+    unsigned long dwKeyIndex,
+    unsigned long dwIoBase
     )
 {
 
    if ((dwKeyIndex & 0x000000FF) < MAX_GROUP_KEY) {
-        if (pTable->KeyTable[MAX_KEY_TABLE-1].bInUse == TRUE) {
+        if (pTable->KeyTable[MAX_KEY_TABLE-1].bInUse == true) {
             if (pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF].byCipherSuite == KEY_CTL_WEP) {
-                pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = FALSE;
+                pTable->KeyTable[MAX_KEY_TABLE-1].GroupKey[dwKeyIndex & 0x000000FF].bKeyValid = false;
                 if ((dwKeyIndex & 0x7FFFFFFF) == (pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex & 0x7FFFFFFF)) {
                     // remove Group transmit key
                     pTable->KeyTable[MAX_KEY_TABLE-1].dwGTKeyIndex = 0;
@@ -494,7 +494,7 @@ void KeyvRemoveWEPKey (
 
 void KeyvRemoveAllWEPKey (
     PSKeyManagement pTable,
-    DWORD_PTR       dwIoBase
+    unsigned long dwIoBase
     )
 {
     int i;
@@ -514,13 +514,13 @@ void KeyvRemoveAllWEPKey (
  *  Out:
  *      pKey            - Key return
  *
- * Return Value: TRUE if found otherwise FALSE
+ * Return Value: true if found otherwise false
  *
  */
-BOOL KeybGetTransmitKey (
+bool KeybGetTransmitKey (
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyType,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyType,
     PSKeyItem       *pKey
     )
 {
@@ -528,12 +528,12 @@ BOOL KeybGetTransmitKey (
 
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 
             if (dwKeyType == PAIRWISE_KEY) {
 
-                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE) {
+                if (pTable->KeyTable[i].PairwiseKey.bKeyValid == true) {
                     *pKey = &(pTable->KeyTable[i].PairwiseKey);
 
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybGetTransmitKey:");
@@ -544,19 +544,19 @@ BOOL KeybGetTransmitKey (
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
 
 
-                    return (TRUE);
+                    return (true);
                 }
                 else {
-                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PairwiseKey.bKeyValid == FALSE\n");
-                    return (FALSE);
+                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"PairwiseKey.bKeyValid == false\n");
+                    return (false);
                 }
             } // End of Type == PAIRWISE
             else {
                 if (pTable->KeyTable[i].dwGTKeyIndex == 0) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ERROR: dwGTKeyIndex == 0 !!!\n");
-                    return FALSE;
+                    return false;
                 }
-                if (pTable->KeyTable[i].GroupKey[(pTable->KeyTable[i].dwGTKeyIndex&0x000000FF)].bKeyValid == TRUE) {
+                if (pTable->KeyTable[i].GroupKey[(pTable->KeyTable[i].dwGTKeyIndex&0x000000FF)].bKeyValid == true) {
                     *pKey = &(pTable->KeyTable[i].GroupKey[(pTable->KeyTable[i].dwGTKeyIndex&0x000000FF)]);
 
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KeybGetTransmitKey:");
@@ -567,11 +567,11 @@ BOOL KeybGetTransmitKey (
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"dwGTKeyIndex: %lX\n", pTable->KeyTable[i].dwGTKeyIndex);
 
-                    return (TRUE);
+                    return (true);
                 }
                 else {
-                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"GroupKey.bKeyValid == FALSE\n");
-                    return (FALSE);
+                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"GroupKey.bKeyValid == false\n");
+                    return (false);
                 }
             } // End of Type = GROUP
         } // BSSID match
@@ -581,7 +581,7 @@ BOOL KeybGetTransmitKey (
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *(pbyBSSID+ii));
     }
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
-    return (FALSE);
+    return (false);
 }
 
 
@@ -594,10 +594,10 @@ BOOL KeybGetTransmitKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if found otherwise FALSE
+ * Return Value: true if found otherwise false
  *
  */
-BOOL KeybCheckPairewiseKey (
+bool KeybCheckPairewiseKey (
     PSKeyManagement pTable,
     PSKeyItem       *pKey
     )
@@ -606,13 +606,13 @@ BOOL KeybCheckPairewiseKey (
 
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
-        if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE)) {
+        if ((pTable->KeyTable[i].bInUse == true) &&
+            (pTable->KeyTable[i].PairwiseKey.bKeyValid == true)) {
             *pKey = &(pTable->KeyTable[i].PairwiseKey);
-            return (TRUE);
+            return (true);
         }
     }
-    return (FALSE);
+    return (false);
 }
 
 /*
@@ -628,34 +628,34 @@ BOOL KeybCheckPairewiseKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
-BOOL KeybSetDefaultKey (
+bool KeybSetDefaultKey (
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     )
 {
-    UINT        ii;
+    unsigned int ii;
     PSKeyItem   pKey;
-    UINT        uKeyIdx;
+    unsigned int uKeyIdx;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetDefaultKey: %1x, %d \n", (int)dwKeyIndex, (int)uKeyLength);
 
 
     if ((dwKeyIndex & PAIRWISE_KEY) != 0) {                  // Pairwise key
-        return (FALSE);
+        return (false);
     } else if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY) {
-        return (FALSE);
+        return (false);
     }
 
-    pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = TRUE;
+    pTable->KeyTable[MAX_KEY_TABLE-1].bInUse = true;
     for(ii=0;ii<ETH_ALEN;ii++)
         pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID[ii] = 0xFF;
 
@@ -676,13 +676,13 @@ BOOL KeybSetDefaultKey (
     if ((uKeyLength == WLAN_WEP232_KEYLEN) &&
         (byKeyDecMode == KEY_CTL_WEP)) {
         pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= 0x4000;              // disable on-fly disable address match
-        pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP = TRUE;
+        pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP = true;
     } else {
-        if (pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP == FALSE)
+        if (pTable->KeyTable[MAX_KEY_TABLE-1].bSoftWEP == false)
             pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl |= 0xC000;          // enable on-fly disable address match
     }
 
-    pKey->bKeyValid = TRUE;
+    pKey->bKeyValid = true;
     pKey->uKeyLength = uKeyLength;
     pKey->dwKeyIndex = dwKeyIndex;
     pKey->byCipherSuite = byKeyDecMode;
@@ -693,7 +693,7 @@ BOOL KeybSetDefaultKey (
         if (uKeyLength == WLAN_WEP104_KEYLEN)
             pKey->abyKey[15] |= 0x80;
     }
-    MACvSetKeyEntry(dwIoBase, pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl, MAX_KEY_TABLE-1, uKeyIdx, pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+    MACvSetKeyEntry(dwIoBase, pTable->KeyTable[MAX_KEY_TABLE-1].wKeyCtl, MAX_KEY_TABLE-1, uKeyIdx, pTable->KeyTable[MAX_KEY_TABLE-1].abyBSSID, (unsigned long *)pKey->abyKey, byLocalID);
 
     if ((dwKeyIndex & USE_KEYRSC) == 0) {
         // RSC set by NIC
@@ -718,7 +718,7 @@ BOOL KeybSetDefaultKey (
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->wTSC15_0: %x\n", pKey->wTSC15_0);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"pKey->dwKeyIndex: %lx\n", pKey->dwKeyIndex);
 
-    return (TRUE);
+    return (true);
 }
 
 
@@ -735,36 +735,36 @@ BOOL KeybSetDefaultKey (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success otherwise FALSE
+ * Return Value: true if success otherwise false
  *
  */
-BOOL KeybSetAllGroupKey (
+bool KeybSetAllGroupKey (
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     )
 {
     int         i;
-    UINT        ii;
+    unsigned int ii;
     PSKeyItem   pKey;
-    UINT        uKeyIdx;
+    unsigned int uKeyIdx;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Enter KeybSetAllGroupKey: %lX\n", dwKeyIndex);
 
 
     if ((dwKeyIndex & PAIRWISE_KEY) != 0) {                  // Pairwise key
-        return (FALSE);
+        return (false);
     } else if ((dwKeyIndex & 0x000000FF) >= MAX_GROUP_KEY) {
-        return (FALSE);
+        return (false);
     }
 
     for (i=0; i < MAX_KEY_TABLE-1; i++) {
-        if (pTable->KeyTable[i].bInUse == TRUE) {
+        if (pTable->KeyTable[i].bInUse == true) {
             // found table already exist
             // Group key
             pKey = &(pTable->KeyTable[i].GroupKey[dwKeyIndex & 0x000000FF]);
@@ -781,7 +781,7 @@ BOOL KeybSetAllGroupKey (
 
             pTable->KeyTable[i].wKeyCtl |= 0x8000;              // enable on-fly
 
-            pKey->bKeyValid = TRUE;
+            pKey->bKeyValid = true;
             pKey->uKeyLength = uKeyLength;
             pKey->dwKeyIndex = dwKeyIndex;
             pKey->byCipherSuite = byKeyDecMode;
@@ -792,7 +792,7 @@ BOOL KeybSetAllGroupKey (
                 if (uKeyLength == WLAN_WEP104_KEYLEN)
                     pKey->abyKey[15] |= 0x80;
             }
-            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pTable->KeyTable[i].abyBSSID, (PDWORD)pKey->abyKey, byLocalID);
+            MACvSetKeyEntry(dwIoBase, pTable->KeyTable[i].wKeyCtl, i, uKeyIdx, pTable->KeyTable[i].abyBSSID, (unsigned long *)pKey->abyKey, byLocalID);
 
             if ((dwKeyIndex & USE_KEYRSC) == 0) {
                 // RSC set by NIC
@@ -817,7 +817,7 @@ BOOL KeybSetAllGroupKey (
             //DBG_PRN_GRP12(("pKey->wTSC15_0: %X\n ", pKey->wTSC15_0));
             //DBG_PRN_GRP12(("pKey->dwKeyIndex: %lX\n ", pKey->dwKeyIndex));
 
-        } // (pTable->KeyTable[i].bInUse == TRUE)
+        } // (pTable->KeyTable[i].bInUse == true)
     }
-    return (TRUE);
+    return (true);
 }
diff --git a/drivers/staging/vt6655/key.h b/drivers/staging/vt6655/key.h
index 39403d93aeb..6b2dad331a5 100644
--- a/drivers/staging/vt6655/key.h
+++ b/drivers/staging/vt6655/key.h
@@ -57,33 +57,33 @@
 
 typedef struct tagSKeyItem
 {
-    BOOL        bKeyValid;
-    ULONG       uKeyLength;
-    BYTE        abyKey[MAX_KEY_LEN];
+    bool bKeyValid;
+    unsigned long uKeyLength;
+    unsigned char abyKey[MAX_KEY_LEN];
     QWORD       KeyRSC;
-    DWORD       dwTSC47_16;
-    WORD        wTSC15_0;
-    BYTE        byCipherSuite;
-    BYTE        byReserved0;
-    DWORD       dwKeyIndex;
+    unsigned long dwTSC47_16;
+    unsigned short wTSC15_0;
+    unsigned char byCipherSuite;
+    unsigned char byReserved0;
+    unsigned long dwKeyIndex;
     void *pvKeyTable;
 } SKeyItem, *PSKeyItem; //64
 
 typedef struct tagSKeyTable
 {
-    BYTE        abyBSSID[ETH_ALEN];  //6
-    BYTE        byReserved0[2];              //8
+    unsigned char abyBSSID[ETH_ALEN];  //6
+    unsigned char byReserved0[2];              //8
     SKeyItem    PairwiseKey;
     SKeyItem    GroupKey[MAX_GROUP_KEY]; //64*5 = 320, 320+8=328
-    DWORD       dwGTKeyIndex;            // GroupTransmitKey Index
-    BOOL        bInUse;
+    unsigned long dwGTKeyIndex;            // GroupTransmitKey Index
+    bool bInUse;
     //2006-1116-01,<Modify> by NomadZhao
-    //WORD      wKeyCtl;
-    //BOOL      bSoftWEP;
-    BOOL        bSoftWEP;
-    WORD        wKeyCtl;      // for address of wKeyCtl at align 4
+    //unsigned short wKeyCtl;
+    //bool bSoftWEP;
+    bool bSoftWEP;
+    unsigned short wKeyCtl;      // for address of wKeyCtl at align 4
 
-    BYTE        byReserved1[6];
+    unsigned char byReserved1[6];
 } SKeyTable, *PSKeyTable; //348
 
 typedef struct tagSKeyManagement
@@ -101,83 +101,83 @@ typedef struct tagSKeyManagement
 
 /*---------------------  Export Functions  --------------------------*/
 
-void KeyvInitTable(PSKeyManagement pTable, DWORD_PTR dwIoBase);
+void KeyvInitTable(PSKeyManagement pTable, unsigned long dwIoBase);
 
-BOOL KeybGetKey(
+bool KeybGetKey(
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
     PSKeyItem       *pKey
     );
 
-BOOL KeybSetKey(
+bool KeybSetKey(
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     );
 
-BOOL KeybSetDefaultKey(
+bool KeybSetDefaultKey(
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     );
 
-BOOL KeybRemoveKey(
+bool KeybRemoveKey(
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyIndex,
-    DWORD_PTR       dwIoBase
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyIndex,
+    unsigned long dwIoBase
     );
 
-BOOL KeybGetTransmitKey(
+bool KeybGetTransmitKey(
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD           dwKeyType,
+    unsigned char *pbyBSSID,
+    unsigned long dwKeyType,
     PSKeyItem       *pKey
     );
 
-BOOL KeybCheckPairewiseKey(
+bool KeybCheckPairewiseKey(
     PSKeyManagement pTable,
     PSKeyItem       *pKey
     );
 
-BOOL KeybRemoveAllKey(
+bool KeybRemoveAllKey(
     PSKeyManagement pTable,
-    PBYTE           pbyBSSID,
-    DWORD_PTR       dwIoBase
+    unsigned char *pbyBSSID,
+    unsigned long dwIoBase
     );
 
 void KeyvRemoveWEPKey(
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    DWORD_PTR       dwIoBase
+    unsigned long dwKeyIndex,
+    unsigned long dwIoBase
     );
 
 void KeyvRemoveAllWEPKey(
     PSKeyManagement pTable,
-    DWORD_PTR       dwIoBase
+    unsigned long dwIoBase
     );
 
-BOOL KeybSetAllGroupKey (
+bool KeybSetAllGroupKey (
     PSKeyManagement pTable,
-    DWORD           dwKeyIndex,
-    ULONG           uKeyLength,
+    unsigned long dwKeyIndex,
+    unsigned long uKeyLength,
     PQWORD          pKeyRSC,
-    PBYTE           pbyKey,
-    BYTE            byKeyDecMode,
-    DWORD_PTR       dwIoBase,
-    BYTE            byLocalID
+    unsigned char *pbyKey,
+    unsigned char byKeyDecMode,
+    unsigned long dwIoBase,
+    unsigned char byLocalID
     );
 
 #endif // __KEY_H__
diff --git a/drivers/staging/vt6655/mac.c b/drivers/staging/vt6655/mac.c
index f1ef7da75c2..f8d1651341f 100644
--- a/drivers/staging/vt6655/mac.c
+++ b/drivers/staging/vt6655/mac.c
@@ -72,7 +72,7 @@
 #include "tether.h"
 #include "mac.h"
 
-WORD TxRate_iwconfig;//2008-5-8 <add> by chester
+unsigned short TxRate_iwconfig;//2008-5-8 <add> by chester
 /*---------------------  Static Definitions -------------------------*/
 //static int          msglevel                =MSG_LEVEL_DEBUG;
 static int          msglevel                =MSG_LEVEL_INFO;
@@ -103,7 +103,7 @@ static int          msglevel                =MSG_LEVEL_INFO;
  * Return Value: none
  *
  */
-void MACvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyMacRegs)
+void MACvReadAllRegs (unsigned long dwIoBase, unsigned char *pbyMacRegs)
 {
     int ii;
 
@@ -137,12 +137,12 @@ void MACvReadAllRegs (DWORD_PTR dwIoBase, PBYTE pbyMacRegs)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all test bits On; otherwise FALSE
+ * Return Value: true if all test bits On; otherwise false
  *
  */
-BOOL MACbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
+bool MACbIsRegBitsOn (unsigned long dwIoBase, unsigned char byRegOfs, unsigned char byTestBits)
 {
-    BYTE byData;
+    unsigned char byData;
 
     VNSvInPortB(dwIoBase + byRegOfs, &byData);
     return (byData & byTestBits) == byTestBits;
@@ -160,12 +160,12 @@ BOOL MACbIsRegBitsOn (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all test bits Off; otherwise FALSE
+ * Return Value: true if all test bits Off; otherwise false
  *
  */
-BOOL MACbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
+bool MACbIsRegBitsOff (unsigned long dwIoBase, unsigned char byRegOfs, unsigned char byTestBits)
 {
-    BYTE byData;
+    unsigned char byData;
 
     VNSvInPortB(dwIoBase + byRegOfs, &byData);
     return !(byData & byTestBits);
@@ -181,18 +181,18 @@ BOOL MACbIsRegBitsOff (DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if interrupt is disable; otherwise FALSE
+ * Return Value: true if interrupt is disable; otherwise false
  *
  */
-BOOL MACbIsIntDisable (DWORD_PTR dwIoBase)
+bool MACbIsIntDisable (unsigned long dwIoBase)
 {
-    DWORD dwData;
+    unsigned long dwData;
 
     VNSvInPortD(dwIoBase + MAC_REG_IMR, &dwData);
     if (dwData != 0)
-        return FALSE;
+        return false;
 
-    return TRUE;
+    return true;
 }
 
 /*
@@ -209,9 +209,9 @@ BOOL MACbIsIntDisable (DWORD_PTR dwIoBase)
  * Return Value: Mask Value read
  *
  */
-BYTE MACbyReadMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx)
+unsigned char MACbyReadMultiAddr (unsigned long dwIoBase, unsigned int uByteIdx)
 {
-    BYTE byData;
+    unsigned char byData;
 
     MACvSelectPage1(dwIoBase);
     VNSvInPortB(dwIoBase + MAC_REG_MAR0 + uByteIdx, &byData);
@@ -234,7 +234,7 @@ BYTE MACbyReadMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx)
  * Return Value: none
  *
  */
-void MACvWriteMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx, BYTE byData)
+void MACvWriteMultiAddr (unsigned long dwIoBase, unsigned int uByteIdx, unsigned char byData)
 {
     MACvSelectPage1(dwIoBase);
     VNSvOutPortB(dwIoBase + MAC_REG_MAR0 + uByteIdx, byData);
@@ -255,11 +255,11 @@ void MACvWriteMultiAddr (DWORD_PTR dwIoBase, UINT uByteIdx, BYTE byData)
  * Return Value: none
  *
  */
-void MACvSetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
+void MACvSetMultiAddrByHash (unsigned long dwIoBase, unsigned char byHashIdx)
 {
-    UINT uByteIdx;
-    BYTE byBitMask;
-    BYTE byOrgValue;
+    unsigned int uByteIdx;
+    unsigned char byBitMask;
+    unsigned char byOrgValue;
 
     // calculate byte position
     uByteIdx = byHashIdx / 8;
@@ -269,7 +269,7 @@ void MACvSetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
     byBitMask <<= (byHashIdx % 8);
     // turn on the bit
     byOrgValue = MACbyReadMultiAddr(dwIoBase, uByteIdx);
-    MACvWriteMultiAddr(dwIoBase, uByteIdx, (BYTE)(byOrgValue | byBitMask));
+    MACvWriteMultiAddr(dwIoBase, uByteIdx, (unsigned char)(byOrgValue | byBitMask));
 }
 
 /*
@@ -286,11 +286,11 @@ void MACvSetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
  * Return Value: none
  *
  */
-void MACvResetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
+void MACvResetMultiAddrByHash (unsigned long dwIoBase, unsigned char byHashIdx)
 {
-    UINT uByteIdx;
-    BYTE byBitMask;
-    BYTE byOrgValue;
+    unsigned int uByteIdx;
+    unsigned char byBitMask;
+    unsigned char byOrgValue;
 
     // calculate byte position
     uByteIdx = byHashIdx / 8;
@@ -300,7 +300,7 @@ void MACvResetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
     byBitMask <<= (byHashIdx % 8);
     // turn off the bit
     byOrgValue = MACbyReadMultiAddr(dwIoBase, uByteIdx);
-    MACvWriteMultiAddr(dwIoBase, uByteIdx, (BYTE)(byOrgValue & (~byBitMask)));
+    MACvWriteMultiAddr(dwIoBase, uByteIdx, (unsigned char)(byOrgValue & (~byBitMask)));
 }
 
 /*
@@ -317,9 +317,9 @@ void MACvResetMultiAddrByHash (DWORD_PTR dwIoBase, BYTE byHashIdx)
  * Return Value: none
  *
  */
-void MACvSetRxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
+void MACvSetRxThreshold (unsigned long dwIoBase, unsigned char byThreshold)
 {
-    BYTE byOrgValue;
+    unsigned char byOrgValue;
 
     ASSERT(byThreshold < 4);
 
@@ -342,7 +342,7 @@ void MACvSetRxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
  * Return Value: none
  *
  */
-void MACvGetRxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
+void MACvGetRxThreshold (unsigned long dwIoBase, unsigned char *pbyThreshold)
 {
     // get FCR0
     VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyThreshold);
@@ -363,9 +363,9 @@ void MACvGetRxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
  * Return Value: none
  *
  */
-void MACvSetTxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
+void MACvSetTxThreshold (unsigned long dwIoBase, unsigned char byThreshold)
 {
-    BYTE byOrgValue;
+    unsigned char byOrgValue;
 
     ASSERT(byThreshold < 4);
 
@@ -388,7 +388,7 @@ void MACvSetTxThreshold (DWORD_PTR dwIoBase, BYTE byThreshold)
  * Return Value: none
  *
  */
-void MACvGetTxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
+void MACvGetTxThreshold (unsigned long dwIoBase, unsigned char *pbyThreshold)
 {
     // get FCR0
     VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyThreshold);
@@ -409,9 +409,9 @@ void MACvGetTxThreshold (DWORD_PTR dwIoBase, PBYTE pbyThreshold)
  * Return Value: none
  *
  */
-void MACvSetDmaLength (DWORD_PTR dwIoBase, BYTE byDmaLength)
+void MACvSetDmaLength (unsigned long dwIoBase, unsigned char byDmaLength)
 {
-    BYTE byOrgValue;
+    unsigned char byOrgValue;
 
     ASSERT(byDmaLength < 4);
 
@@ -434,7 +434,7 @@ void MACvSetDmaLength (DWORD_PTR dwIoBase, BYTE byDmaLength)
  * Return Value: none
  *
  */
-void MACvGetDmaLength (DWORD_PTR dwIoBase, PBYTE pbyDmaLength)
+void MACvGetDmaLength (unsigned long dwIoBase, unsigned char *pbyDmaLength)
 {
     // get FCR0
     VNSvInPortB(dwIoBase + MAC_REG_FCR0, pbyDmaLength);
@@ -455,7 +455,7 @@ void MACvGetDmaLength (DWORD_PTR dwIoBase, PBYTE pbyDmaLength)
  * Return Value: none
  *
  */
-void MACvSetShortRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
+void MACvSetShortRetryLimit (unsigned long dwIoBase, unsigned char byRetryLimit)
 {
     // set SRT
     VNSvOutPortB(dwIoBase + MAC_REG_SRT, byRetryLimit);
@@ -474,7 +474,7 @@ void MACvSetShortRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
  * Return Value: none
  *
  */
-void MACvGetShortRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
+void MACvGetShortRetryLimit (unsigned long dwIoBase, unsigned char *pbyRetryLimit)
 {
     // get SRT
     VNSvInPortB(dwIoBase + MAC_REG_SRT, pbyRetryLimit);
@@ -494,7 +494,7 @@ void MACvGetShortRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
  * Return Value: none
  *
  */
-void MACvSetLongRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
+void MACvSetLongRetryLimit (unsigned long dwIoBase, unsigned char byRetryLimit)
 {
     // set LRT
     VNSvOutPortB(dwIoBase + MAC_REG_LRT, byRetryLimit);
@@ -513,7 +513,7 @@ void MACvSetLongRetryLimit (DWORD_PTR dwIoBase, BYTE byRetryLimit)
  * Return Value: none
  *
  */
-void MACvGetLongRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
+void MACvGetLongRetryLimit (unsigned long dwIoBase, unsigned char *pbyRetryLimit)
 {
     // get LRT
     VNSvInPortB(dwIoBase + MAC_REG_LRT, pbyRetryLimit);
@@ -533,9 +533,9 @@ void MACvGetLongRetryLimit (DWORD_PTR dwIoBase, PBYTE pbyRetryLimit)
  * Return Value: none
  *
  */
-void MACvSetLoopbackMode (DWORD_PTR dwIoBase, BYTE byLoopbackMode)
+void MACvSetLoopbackMode (unsigned long dwIoBase, unsigned char byLoopbackMode)
 {
-    BYTE byOrgValue;
+    unsigned char byOrgValue;
 
     ASSERT(byLoopbackMode < 3);
     byLoopbackMode <<= 6;
@@ -556,17 +556,17 @@ void MACvSetLoopbackMode (DWORD_PTR dwIoBase, BYTE byLoopbackMode)
  *  Out:
  *      none
  *
- * Return Value: TRUE if in Loopback mode; otherwise FALSE
+ * Return Value: true if in Loopback mode; otherwise false
  *
  */
-BOOL MACbIsInLoopbackMode (DWORD_PTR dwIoBase)
+bool MACbIsInLoopbackMode (unsigned long dwIoBase)
 {
-    BYTE byOrgValue;
+    unsigned char byOrgValue;
 
     VNSvInPortB(dwIoBase + MAC_REG_TEST, &byOrgValue);
     if (byOrgValue & (TEST_LBINT | TEST_LBEXT))
-        return TRUE;
-    return FALSE;
+        return true;
+    return false;
 }
 
 /*
@@ -583,10 +583,10 @@ BOOL MACbIsInLoopbackMode (DWORD_PTR dwIoBase)
  * Return Value: none
  *
  */
-void MACvSetPacketFilter (DWORD_PTR dwIoBase, WORD wFilterType)
+void MACvSetPacketFilter (unsigned long dwIoBase, unsigned short wFilterType)
 {
-    BYTE    byOldRCR;
-    BYTE    byNewRCR = 0;
+    unsigned char byOldRCR;
+    unsigned char byNewRCR = 0;
 
     // if only in DIRECTED mode, multicast-address will set to zero,
     // but if other mode exist (e.g. PROMISCUOUS), multicast-address
@@ -595,7 +595,7 @@ void MACvSetPacketFilter (DWORD_PTR dwIoBase, WORD wFilterType)
         // set multicast address to accept none
         MACvSelectPage1(dwIoBase);
         VNSvOutPortD(dwIoBase + MAC_REG_MAR0, 0L);
-        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(DWORD), 0L);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(unsigned long), 0L);
         MACvSelectPage0(dwIoBase);
     }
 
@@ -603,7 +603,7 @@ void MACvSetPacketFilter (DWORD_PTR dwIoBase, WORD wFilterType)
         // set multicast address to accept all
         MACvSelectPage1(dwIoBase);
         VNSvOutPortD(dwIoBase + MAC_REG_MAR0, 0xFFFFFFFFL);
-        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(DWORD), 0xFFFFFFFFL);
+        VNSvOutPortD(dwIoBase + MAC_REG_MAR0 + sizeof(unsigned long), 0xFFFFFFFFL);
         MACvSelectPage0(dwIoBase);
     }
 
@@ -643,7 +643,7 @@ void MACvSetPacketFilter (DWORD_PTR dwIoBase, WORD wFilterType)
  * Return Value: none
  *
  */
-void MACvSaveContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+void MACvSaveContext (unsigned long dwIoBase, unsigned char *pbyCxtBuf)
 {
     int         ii;
 
@@ -676,7 +676,7 @@ void MACvSaveContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
  * Return Value: none
  *
  */
-void MACvRestoreContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+void MACvRestoreContext (unsigned long dwIoBase, unsigned char *pbyCxtBuf)
 {
     int         ii;
 
@@ -703,14 +703,14 @@ void MACvRestoreContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
     }
 
     // restore CURR_RX_DESC_ADDR, CURR_TX_DESC_ADDR
-    VNSvOutPortD(dwIoBase + MAC_REG_TXDMAPTR0, *(PDWORD)(pbyCxtBuf + MAC_REG_TXDMAPTR0));
-    VNSvOutPortD(dwIoBase + MAC_REG_AC0DMAPTR, *(PDWORD)(pbyCxtBuf + MAC_REG_AC0DMAPTR));
-    VNSvOutPortD(dwIoBase + MAC_REG_BCNDMAPTR, *(PDWORD)(pbyCxtBuf + MAC_REG_BCNDMAPTR));
+    VNSvOutPortD(dwIoBase + MAC_REG_TXDMAPTR0, *(unsigned long *)(pbyCxtBuf + MAC_REG_TXDMAPTR0));
+    VNSvOutPortD(dwIoBase + MAC_REG_AC0DMAPTR, *(unsigned long *)(pbyCxtBuf + MAC_REG_AC0DMAPTR));
+    VNSvOutPortD(dwIoBase + MAC_REG_BCNDMAPTR, *(unsigned long *)(pbyCxtBuf + MAC_REG_BCNDMAPTR));
 
 
-    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR0, *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR0));
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR0, *(unsigned long *)(pbyCxtBuf + MAC_REG_RXDMAPTR0));
 
-    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR1, *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR1));
+    VNSvOutPortD(dwIoBase + MAC_REG_RXDMAPTR1, *(unsigned long *)(pbyCxtBuf + MAC_REG_RXDMAPTR1));
 
 }
 
@@ -725,39 +725,39 @@ void MACvRestoreContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all values are the same; otherwise FALSE
+ * Return Value: true if all values are the same; otherwise false
  *
  */
-BOOL MACbCompareContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
+bool MACbCompareContext (unsigned long dwIoBase, unsigned char *pbyCxtBuf)
 {
-    DWORD       dwData;
+    unsigned long dwData;
 
     // compare MAC context to determine if this is a power lost init,
-    // return TRUE for power remaining init, return FALSE for power lost init
+    // return true for power remaining init, return false for power lost init
 
     // compare CURR_RX_DESC_ADDR, CURR_TX_DESC_ADDR
     VNSvInPortD(dwIoBase + MAC_REG_TXDMAPTR0, &dwData);
-    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_TXDMAPTR0)) {
-        return FALSE;
+    if (dwData != *(unsigned long *)(pbyCxtBuf + MAC_REG_TXDMAPTR0)) {
+        return false;
     }
 
     VNSvInPortD(dwIoBase + MAC_REG_AC0DMAPTR, &dwData);
-    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_AC0DMAPTR)) {
-        return FALSE;
+    if (dwData != *(unsigned long *)(pbyCxtBuf + MAC_REG_AC0DMAPTR)) {
+        return false;
     }
 
     VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR0, &dwData);
-    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR0)) {
-        return FALSE;
+    if (dwData != *(unsigned long *)(pbyCxtBuf + MAC_REG_RXDMAPTR0)) {
+        return false;
     }
 
     VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR1, &dwData);
-    if (dwData != *(PDWORD)(pbyCxtBuf + MAC_REG_RXDMAPTR1)) {
-        return FALSE;
+    if (dwData != *(unsigned long *)(pbyCxtBuf + MAC_REG_RXDMAPTR1)) {
+        return false;
     }
 
 
-    return TRUE;
+    return true;
 }
 
 /*
@@ -770,13 +770,13 @@ BOOL MACbCompareContext (DWORD_PTR dwIoBase, PBYTE pbyCxtBuf)
  *  Out:
  *      none
  *
- * Return Value: TRUE if Reset Success; otherwise FALSE
+ * Return Value: true if Reset Success; otherwise false
  *
  */
-BOOL MACbSoftwareReset (DWORD_PTR dwIoBase)
+bool MACbSoftwareReset (unsigned long dwIoBase)
 {
-    BYTE    byData;
-    WORD    ww;
+    unsigned char byData;
+    unsigned short ww;
 
     // turn on HOSTCR_SOFTRST, just write 0x01 to reset
     //MACvRegBitsOn(dwIoBase, MAC_REG_HOSTCR, HOSTCR_SOFTRST);
@@ -788,8 +788,8 @@ BOOL MACbSoftwareReset (DWORD_PTR dwIoBase)
             break;
     }
     if (ww == W_MAX_TIMEOUT)
-        return FALSE;
-    return TRUE;
+        return false;
+    return true;
 
 }
 
@@ -803,13 +803,13 @@ BOOL MACbSoftwareReset (DWORD_PTR dwIoBase)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL MACbSafeSoftwareReset (DWORD_PTR dwIoBase)
+bool MACbSafeSoftwareReset (unsigned long dwIoBase)
 {
-    BYTE    abyTmpRegData[MAC_MAX_CONTEXT_SIZE_PAGE0+MAC_MAX_CONTEXT_SIZE_PAGE1];
-    BOOL    bRetVal;
+    unsigned char abyTmpRegData[MAC_MAX_CONTEXT_SIZE_PAGE0+MAC_MAX_CONTEXT_SIZE_PAGE1];
+    bool bRetVal;
 
     // PATCH....
     // save some important register's value, then do
@@ -836,14 +836,14 @@ BOOL MACbSafeSoftwareReset (DWORD_PTR dwIoBase)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
+bool MACbSafeRxOff (unsigned long dwIoBase)
 {
-    WORD    ww;
-    DWORD   dwData;
-    BYTE    byData;
+    unsigned short ww;
+    unsigned long dwData;
+    unsigned char byData;
 
     // turn off wow temp for turn off Rx safely
 
@@ -858,7 +858,7 @@ BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x10);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x10)\n");
-        return(FALSE);
+        return(false);
     }
     for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
         VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL1, &dwData);
@@ -868,7 +868,7 @@ BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x11);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x11)\n");
-        return(FALSE);
+        return(false);
     }
 
     // try to safe shutdown RX
@@ -882,9 +882,9 @@ BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x12);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x12)\n");
-        return(FALSE);
+        return(false);
     }
-    return TRUE;
+    return true;
 }
 
 /*
@@ -897,14 +897,14 @@ BOOL MACbSafeRxOff (DWORD_PTR dwIoBase)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
+bool MACbSafeTxOff (unsigned long dwIoBase)
 {
-    WORD    ww;
-    DWORD   dwData;
-    BYTE    byData;
+    unsigned short ww;
+    unsigned long dwData;
+    unsigned char byData;
 
     // Clear TX DMA
     //Tx0
@@ -921,7 +921,7 @@ BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x20);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x20)\n");
-        return(FALSE);
+        return(false);
     }
     for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
         VNSvInPortD(dwIoBase + MAC_REG_AC0DMACTL, &dwData);
@@ -931,7 +931,7 @@ BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x21);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x21)\n");
-        return(FALSE);
+        return(false);
     }
 
     // try to safe shutdown TX
@@ -946,9 +946,9 @@ BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x24);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x24)\n");
-        return(FALSE);
+        return(false);
     }
-    return TRUE;
+    return true;
 }
 
 /*
@@ -961,29 +961,29 @@ BOOL MACbSafeTxOff (DWORD_PTR dwIoBase)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL MACbSafeStop (DWORD_PTR dwIoBase)
+bool MACbSafeStop (unsigned long dwIoBase)
 {
     MACvRegBitsOff(dwIoBase, MAC_REG_TCR, TCR_AUTOBCNTX);
 
-    if (MACbSafeRxOff(dwIoBase) == FALSE) {
+    if (MACbSafeRxOff(dwIoBase) == false) {
         DBG_PORT80(0xA1);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeRxOff == FALSE)\n");
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeRxOff == false)\n");
         MACbSafeSoftwareReset(dwIoBase);
-        return FALSE;
+        return false;
     }
-    if (MACbSafeTxOff(dwIoBase) == FALSE) {
+    if (MACbSafeTxOff(dwIoBase) == false) {
         DBG_PORT80(0xA2);
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeTxOff == FALSE)\n");
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" MACbSafeTxOff == false)\n");
         MACbSafeSoftwareReset(dwIoBase);
-        return FALSE;
+        return false;
     }
 
     MACvRegBitsOff(dwIoBase, MAC_REG_HOSTCR, HOSTCR_MACEN);
 
-    return TRUE;
+    return true;
 }
 
 /*
@@ -996,10 +996,10 @@ BOOL MACbSafeStop (DWORD_PTR dwIoBase)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL MACbShutdown (DWORD_PTR dwIoBase)
+bool MACbShutdown (unsigned long dwIoBase)
 {
     // disable MAC IMR
     MACvIntDisable(dwIoBase);
@@ -1007,10 +1007,10 @@ BOOL MACbShutdown (DWORD_PTR dwIoBase)
     // stop the adapter
     if (!MACbSafeStop(dwIoBase)) {
         MACvSetLoopbackMode(dwIoBase, MAC_LB_NONE);
-        return FALSE;
+        return false;
     }
     MACvSetLoopbackMode(dwIoBase, MAC_LB_NONE);
-    return TRUE;
+    return true;
 }
 
 /*
@@ -1026,7 +1026,7 @@ BOOL MACbShutdown (DWORD_PTR dwIoBase)
  * Return Value: none
  *
  */
-void MACvInitialize (DWORD_PTR dwIoBase)
+void MACvInitialize (unsigned long dwIoBase)
 {
     // clear sticky bits
     MACvClearStckDS(dwIoBase);
@@ -1045,8 +1045,8 @@ void MACvInitialize (DWORD_PTR dwIoBase)
     // issue AUTOLD in EECSR to reload eeprom
     //MACvRegBitsOn(dwIoBase, MAC_REG_I2MCSR, I2MCSR_AUTOLD);
     // wait until EEPROM loading complete
-    //while (TRUE) {
-    //    U8 u8Data;
+    //while (true) {
+    //    u8 u8Data;
     //    VNSvInPortB(dwIoBase + MAC_REG_I2MCSR, &u8Data);
     //    if ( !(u8Data & I2MCSR_AUTOLD))
     //        break;
@@ -1079,11 +1079,11 @@ void MACvInitialize (DWORD_PTR dwIoBase)
  * Return Value: none
  *
  */
-void MACvSetCurrRx0DescAddr (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+void MACvSetCurrRx0DescAddr (unsigned long dwIoBase, unsigned long dwCurrDescAddr)
 {
-WORD    ww;
-BYTE    byData;
-BYTE    byOrgDMACtl;
+unsigned short ww;
+unsigned char byData;
+unsigned char byOrgDMACtl;
 
     VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL0, &byOrgDMACtl);
     if (byOrgDMACtl & DMACTL_RUN) {
@@ -1117,11 +1117,11 @@ BYTE    byOrgDMACtl;
  * Return Value: none
  *
  */
-void MACvSetCurrRx1DescAddr (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+void MACvSetCurrRx1DescAddr (unsigned long dwIoBase, unsigned long dwCurrDescAddr)
 {
-WORD    ww;
-BYTE    byData;
-BYTE    byOrgDMACtl;
+unsigned short ww;
+unsigned char byData;
+unsigned char byOrgDMACtl;
 
     VNSvInPortB(dwIoBase + MAC_REG_RXDMACTL1, &byOrgDMACtl);
     if (byOrgDMACtl & DMACTL_RUN) {
@@ -1155,11 +1155,11 @@ BYTE    byOrgDMACtl;
  * Return Value: none
  *
  */
-void MACvSetCurrTx0DescAddrEx (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+void MACvSetCurrTx0DescAddrEx (unsigned long dwIoBase, unsigned long dwCurrDescAddr)
 {
-WORD    ww;
-BYTE    byData;
-BYTE    byOrgDMACtl;
+unsigned short ww;
+unsigned char byData;
+unsigned char byOrgDMACtl;
 
     VNSvInPortB(dwIoBase + MAC_REG_TXDMACTL0, &byOrgDMACtl);
     if (byOrgDMACtl & DMACTL_RUN) {
@@ -1194,11 +1194,11 @@ BYTE    byOrgDMACtl;
  *
  */
  //TxDMA1 = AC0DMA
-void MACvSetCurrAC0DescAddrEx (DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+void MACvSetCurrAC0DescAddrEx (unsigned long dwIoBase, unsigned long dwCurrDescAddr)
 {
-WORD    ww;
-BYTE    byData;
-BYTE    byOrgDMACtl;
+unsigned short ww;
+unsigned char byData;
+unsigned char byOrgDMACtl;
 
     VNSvInPortB(dwIoBase + MAC_REG_AC0DMACTL, &byOrgDMACtl);
     if (byOrgDMACtl & DMACTL_RUN) {
@@ -1221,7 +1221,7 @@ BYTE    byOrgDMACtl;
 
 
 
-void MACvSetCurrTXDescAddr (int iTxType, DWORD_PTR dwIoBase, DWORD dwCurrDescAddr)
+void MACvSetCurrTXDescAddr (int iTxType, unsigned long dwIoBase, unsigned long dwCurrDescAddr)
 {
     if(iTxType == TYPE_AC0DMA){
         MACvSetCurrAC0DescAddrEx(dwIoBase, dwCurrDescAddr);
@@ -1244,10 +1244,10 @@ void MACvSetCurrTXDescAddr (int iTxType, DWORD_PTR dwIoBase, DWORD dwCurrDescAdd
  * Return Value: none
  *
  */
-void MACvTimer0MicroSDelay (DWORD_PTR dwIoBase, UINT uDelay)
+void MACvTimer0MicroSDelay (unsigned long dwIoBase, unsigned int uDelay)
 {
-BYTE byValue;
-UINT uu,ii;
+unsigned char byValue;
+unsigned int uu,ii;
 
     VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
     VNSvOutPortD(dwIoBase + MAC_REG_TMDATA0, uDelay);
@@ -1280,7 +1280,7 @@ UINT uu,ii;
  * Return Value: none
  *
  */
-void MACvOneShotTimer0MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
+void MACvOneShotTimer0MicroSec (unsigned long dwIoBase, unsigned int uDelayTime)
 {
     VNSvOutPortB(dwIoBase + MAC_REG_TMCTL0, 0);
     VNSvOutPortD(dwIoBase + MAC_REG_TMDATA0, uDelayTime);
@@ -1301,7 +1301,7 @@ void MACvOneShotTimer0MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
  * Return Value: none
  *
  */
-void MACvOneShotTimer1MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
+void MACvOneShotTimer1MicroSec (unsigned long dwIoBase, unsigned int uDelayTime)
 {
     VNSvOutPortB(dwIoBase + MAC_REG_TMCTL1, 0);
     VNSvOutPortD(dwIoBase + MAC_REG_TMDATA1, uDelayTime);
@@ -1309,7 +1309,7 @@ void MACvOneShotTimer1MicroSec (DWORD_PTR dwIoBase, UINT uDelayTime)
 }
 
 
-void MACvSetMISCFifo (DWORD_PTR dwIoBase, WORD wOffset, DWORD dwData)
+void MACvSetMISCFifo (unsigned long dwIoBase, unsigned short wOffset, unsigned long dwData)
 {
     if (wOffset > 273)
         return;
@@ -1319,10 +1319,10 @@ void MACvSetMISCFifo (DWORD_PTR dwIoBase, WORD wOffset, DWORD dwData)
 }
 
 
-BOOL MACbTxDMAOff (DWORD_PTR dwIoBase, UINT idx)
+bool MACbTxDMAOff (unsigned long dwIoBase, unsigned int idx)
 {
-BYTE byData;
-UINT ww = 0;
+unsigned char byData;
+unsigned int ww = 0;
 
     if (idx == TYPE_TXDMA0) {
         VNSvOutPortB(dwIoBase + MAC_REG_TXDMACTL0+2, DMACTL_RUN);
@@ -1342,15 +1342,15 @@ UINT ww = 0;
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x29);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x29)\n");
-        return FALSE;
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
-void MACvClearBusSusInd (DWORD_PTR dwIoBase)
+void MACvClearBusSusInd (unsigned long dwIoBase)
 {
-    DWORD dwOrgValue;
-    UINT ww;
+    unsigned long dwOrgValue;
+    unsigned int ww;
     // check if BcnSusInd enabled
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue);
     if( !(dwOrgValue & EnCFG_BcnSusInd))
@@ -1369,11 +1369,11 @@ void MACvClearBusSusInd (DWORD_PTR dwIoBase)
     }
 }
 
-void MACvEnableBusSusEn (DWORD_PTR dwIoBase)
+void MACvEnableBusSusEn (unsigned long dwIoBase)
 {
-    BYTE  byOrgValue;
-    DWORD dwOrgValue;
-    UINT ww;
+    unsigned char byOrgValue;
+    unsigned long dwOrgValue;
+    unsigned int ww;
     // check if BcnSusInd enabled
     VNSvInPortB(dwIoBase + MAC_REG_CFG , &byOrgValue);
 
@@ -1391,10 +1391,10 @@ void MACvEnableBusSusEn (DWORD_PTR dwIoBase)
     }
 }
 
-BOOL MACbFlushSYNCFifo (DWORD_PTR dwIoBase)
+bool MACbFlushSYNCFifo (unsigned long dwIoBase)
 {
-    BYTE  byOrgValue;
-    UINT ww;
+    unsigned char byOrgValue;
+    unsigned int ww;
     // Read MACCR
     VNSvInPortB(dwIoBase + MAC_REG_MACCR , &byOrgValue);
 
@@ -1412,16 +1412,16 @@ BOOL MACbFlushSYNCFifo (DWORD_PTR dwIoBase)
         DBG_PORT80(0x35);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x33)\n");
     }
-    return TRUE;
+    return true;
 }
 
-BOOL MACbPSWakeup (DWORD_PTR dwIoBase)
+bool MACbPSWakeup (unsigned long dwIoBase)
 {
-    BYTE  byOrgValue;
-    UINT ww;
+    unsigned char byOrgValue;
+    unsigned int ww;
     // Read PSCTL
     if (MACbIsRegBitsOff(dwIoBase, MAC_REG_PSCTL, PSCTL_PS)) {
-        return TRUE;
+        return true;
     }
     // Disable PS
     MACvRegBitsOff(dwIoBase, MAC_REG_PSCTL, PSCTL_PSEN);
@@ -1435,9 +1435,9 @@ BOOL MACbPSWakeup (DWORD_PTR dwIoBase)
     if (ww == W_MAX_TIMEOUT) {
         DBG_PORT80(0x36);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" DBG_PORT80(0x33)\n");
-        return FALSE;
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
 /*
@@ -1455,10 +1455,11 @@ BOOL MACbPSWakeup (DWORD_PTR dwIoBase)
  *
  */
 
-void MACvSetKeyEntry (DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, UINT uKeyIdx, PBYTE pbyAddr, PDWORD pdwKey, BYTE byLocalID)
+void MACvSetKeyEntry (unsigned long dwIoBase, unsigned short wKeyCtl, unsigned int uEntryIdx,
+		unsigned int uKeyIdx, unsigned char *pbyAddr, unsigned long *pdwKey, unsigned char byLocalID)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 int     ii;
 
     if (byLocalID <= 1)
@@ -1521,9 +1522,9 @@ int     ii;
  * Return Value: none
  *
  */
-void MACvDisableKeyEntry (DWORD_PTR dwIoBase, UINT uEntryIdx)
+void MACvDisableKeyEntry (unsigned long dwIoBase, unsigned int uEntryIdx)
 {
-WORD    wOffset;
+unsigned short wOffset;
 
     wOffset = MISCFIFO_KEYETRY0;
     wOffset += (uEntryIdx * MISCFIFO_KEYENTRYSIZE);
@@ -1549,10 +1550,11 @@ WORD    wOffset;
  *
  */
 
-void MACvSetDefaultKeyEntry (DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID)
+void MACvSetDefaultKeyEntry (unsigned long dwIoBase, unsigned int uKeyLen,
+		unsigned int uKeyIdx, unsigned long *pdwKey, unsigned char byLocalID)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 int     ii;
 
     if (byLocalID <= 1)
@@ -1599,10 +1601,10 @@ int     ii;
  *
  */
 /*
-void MACvEnableDefaultKey (DWORD_PTR dwIoBase, BYTE byLocalID)
+void MACvEnableDefaultKey (unsigned long dwIoBase, unsigned char byLocalID)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 
 
     if (byLocalID <= 1)
@@ -1634,10 +1636,10 @@ DWORD   dwData;
  * Return Value: none
  *
  */
-void MACvDisableDefaultKey (DWORD_PTR dwIoBase)
+void MACvDisableDefaultKey (unsigned long dwIoBase)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 
 
     wOffset = MISCFIFO_KEYETRY0;
@@ -1664,10 +1666,11 @@ DWORD   dwData;
  * Return Value: none
  *
  */
-void MACvSetDefaultTKIPKeyEntry (DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID)
+void MACvSetDefaultTKIPKeyEntry (unsigned long dwIoBase, unsigned int uKeyLen,
+		unsigned int uKeyIdx, unsigned long *pdwKey, unsigned char byLocalID)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 int     ii;
 
     if (byLocalID <= 1)
@@ -1720,10 +1723,10 @@ int     ii;
  *
  */
 
-void MACvSetDefaultKeyCtl (DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, BYTE byLocalID)
+void MACvSetDefaultKeyCtl (unsigned long dwIoBase, unsigned short wKeyCtl, unsigned int uEntryIdx, unsigned char byLocalID)
 {
-WORD    wOffset;
-DWORD   dwData;
+unsigned short wOffset;
+unsigned long dwData;
 
     if (byLocalID <= 1)
         return;
diff --git a/drivers/staging/vt6655/mac.h b/drivers/staging/vt6655/mac.h
index 5eb7f57f718..b96d27ee254 100644
--- a/drivers/staging/vt6655/mac.h
+++ b/drivers/staging/vt6655/mac.h
@@ -663,28 +663,28 @@
 
 #define MACvRegBitsOn(dwIoBase, byRegOfs, byBits)           \
 {                                                           \
-    BYTE byData;                                            \
+    unsigned char byData;                                   \
     VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
     VNSvOutPortB(dwIoBase + byRegOfs, byData | (byBits));   \
 }
 
 #define MACvWordRegBitsOn(dwIoBase, byRegOfs, wBits)        \
 {                                                           \
-    WORD wData;                                             \
+    unsigned short wData;                                   \
     VNSvInPortW(dwIoBase + byRegOfs, &wData);               \
     VNSvOutPortW(dwIoBase + byRegOfs, wData | (wBits));     \
 }
 
 #define MACvDWordRegBitsOn(dwIoBase, byRegOfs, dwBits)      \
 {                                                           \
-    DWORD dwData;                                           \
+    unsigned long dwData;                                   \
     VNSvInPortD(dwIoBase + byRegOfs, &dwData);              \
     VNSvOutPortD(dwIoBase + byRegOfs, dwData | (dwBits));   \
 }
 
 #define MACvRegBitsOnEx(dwIoBase, byRegOfs, byMask, byBits) \
 {                                                           \
-    BYTE byData;                                            \
+    unsigned char byData;                                   \
     VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
     byData &= byMask;                                       \
     VNSvOutPortB(dwIoBase + byRegOfs, byData | (byBits));   \
@@ -692,21 +692,21 @@
 
 #define MACvRegBitsOff(dwIoBase, byRegOfs, byBits)          \
 {                                                           \
-    BYTE byData;                                            \
+    unsigned char byData;                                   \
     VNSvInPortB(dwIoBase + byRegOfs, &byData);              \
     VNSvOutPortB(dwIoBase + byRegOfs, byData & ~(byBits));  \
 }
 
 #define MACvWordRegBitsOff(dwIoBase, byRegOfs, wBits)       \
 {                                                           \
-    WORD wData;                                             \
+    unsigned short wData;                                   \
     VNSvInPortW(dwIoBase + byRegOfs, &wData);               \
     VNSvOutPortW(dwIoBase + byRegOfs, wData & ~(wBits));    \
 }
 
 #define MACvDWordRegBitsOff(dwIoBase, byRegOfs, dwBits)     \
 {                                                           \
-    DWORD dwData;                                           \
+    unsigned long dwData;                                   \
     VNSvInPortD(dwIoBase + byRegOfs, &dwData);              \
     VNSvOutPortD(dwIoBase + byRegOfs, dwData & ~(dwBits));  \
 }
@@ -714,37 +714,37 @@
 #define MACvGetCurrRx0DescAddr(dwIoBase, pdwCurrDescAddr)    \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR0,               \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }
 
 #define MACvGetCurrRx1DescAddr(dwIoBase, pdwCurrDescAddr)   \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_RXDMAPTR1,               \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }
 
 #define MACvGetCurrTx0DescAddr(dwIoBase, pdwCurrDescAddr)   \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_TXDMAPTR0,               \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }
 
 #define MACvGetCurrAC0DescAddr(dwIoBase, pdwCurrDescAddr)   \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_AC0DMAPTR,               \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }
 
 #define MACvGetCurrSyncDescAddr(dwIoBase, pdwCurrDescAddr)  \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_SYNCDMAPTR,              \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }
 
 #define MACvGetCurrATIMDescAddr(dwIoBase, pdwCurrDescAddr)  \
 {                                                           \
     VNSvInPortD(dwIoBase + MAC_REG_ATIMDMAPTR,              \
-                (PDWORD)pdwCurrDescAddr);                   \
+                (unsigned long *)pdwCurrDescAddr);          \
 }                                                           \
 
 // set the chip with current BCN tx descriptor address
@@ -765,7 +765,7 @@
 {                                                           \
     VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
     VNSvInPortB(dwIoBase + MAC_REG_BSSID0,                  \
-                (PBYTE)pbyEtherAddr);                       \
+                (unsigned char *)pbyEtherAddr);             \
     VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 1,              \
                 pbyEtherAddr + 1);                          \
     VNSvInPortB(dwIoBase + MAC_REG_BSSID0 + 2,              \
@@ -801,7 +801,7 @@
 {                                                           \
     VNSvOutPortB(dwIoBase + MAC_REG_PAGE1SEL, 1);           \
     VNSvInPortB(dwIoBase + MAC_REG_PAR0,                    \
-                (PBYTE)pbyEtherAddr);                       \
+                (unsigned char *)pbyEtherAddr);             \
     VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 1,                \
                 pbyEtherAddr + 1);                          \
     VNSvInPortB(dwIoBase + MAC_REG_PAR0 + 2,                \
@@ -873,7 +873,7 @@
 
 #define MACvReceive0(dwIoBase)                                  \
 {                                                               \
-    DWORD dwData;                                               \
+    unsigned long dwData;                                       \
     VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL0, &dwData);         \
     if (dwData & DMACTL_RUN) {                                  \
         VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL0, DMACTL_WAKE);\
@@ -885,7 +885,7 @@
 
 #define MACvReceive1(dwIoBase)                                  \
 {                                                               \
-    DWORD dwData;                                                \
+    unsigned long dwData;                                       \
     VNSvInPortD(dwIoBase + MAC_REG_RXDMACTL1, &dwData);         \
     if (dwData & DMACTL_RUN) {                                  \
         VNSvOutPortD(dwIoBase + MAC_REG_RXDMACTL1, DMACTL_WAKE);\
@@ -902,7 +902,7 @@
 
 #define MACvTransmit0(dwIoBase)                                 \
 {                                                               \
-    DWORD dwData;                                                \
+    unsigned long dwData;                                       \
     VNSvInPortD(dwIoBase + MAC_REG_TXDMACTL0, &dwData);         \
     if (dwData & DMACTL_RUN) {                                  \
         VNSvOutPortD(dwIoBase + MAC_REG_TXDMACTL0, DMACTL_WAKE);\
@@ -914,7 +914,7 @@
 
 #define MACvTransmitAC0(dwIoBase)                               \
 {                                                               \
-    DWORD dwData;                                                \
+    unsigned long dwData;                                       \
     VNSvInPortD(dwIoBase + MAC_REG_AC0DMACTL, &dwData);         \
     if (dwData & DMACTL_RUN) {                                  \
         VNSvOutPortD(dwIoBase + MAC_REG_AC0DMACTL, DMACTL_WAKE);\
@@ -926,7 +926,7 @@
 
 #define MACvTransmitSYNC(dwIoBase)                               \
 {                                                                \
-    DWORD dwData;                                                 \
+    unsigned long dwData;                                        \
     VNSvInPortD(dwIoBase + MAC_REG_SYNCDMACTL, &dwData);         \
     if (dwData & DMACTL_RUN) {                                   \
         VNSvOutPortD(dwIoBase + MAC_REG_SYNCDMACTL, DMACTL_WAKE);\
@@ -938,7 +938,7 @@
 
 #define MACvTransmitATIM(dwIoBase)                               \
 {                                                                \
-    DWORD dwData;                                                 \
+    unsigned long dwData;                                        \
     VNSvInPortD(dwIoBase + MAC_REG_ATIMDMACTL, &dwData);         \
     if (dwData & DMACTL_RUN) {                                   \
         VNSvOutPortD(dwIoBase + MAC_REG_ATIMDMACTL, DMACTL_WAKE);\
@@ -955,7 +955,7 @@
 
 #define MACvClearStckDS(dwIoBase)                           \
 {                                                           \
-    BYTE byOrgValue;                                        \
+    unsigned char byOrgValue;                               \
     VNSvInPortB(dwIoBase + MAC_REG_STICKHW, &byOrgValue);   \
     byOrgValue = byOrgValue & 0xFC;                         \
     VNSvOutPortB(dwIoBase + MAC_REG_STICKHW, byOrgValue);   \
@@ -1002,7 +1002,7 @@
 
 #define MACvEnableProtectMD(dwIoBase)                    \
 {                                                        \
-    DWORD dwOrgValue;                                    \
+    unsigned long dwOrgValue;                            \
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
     dwOrgValue = dwOrgValue | EnCFG_ProtectMd;           \
     VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
@@ -1010,7 +1010,7 @@
 
 #define MACvDisableProtectMD(dwIoBase)                   \
 {                                                        \
-    DWORD dwOrgValue;                                     \
+    unsigned long dwOrgValue;                            \
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
     dwOrgValue = dwOrgValue & ~EnCFG_ProtectMd;          \
     VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
@@ -1018,7 +1018,7 @@
 
 #define MACvEnableBarkerPreambleMd(dwIoBase)             \
 {                                                        \
-    DWORD dwOrgValue;                                    \
+    unsigned long dwOrgValue;                            \
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
     dwOrgValue = dwOrgValue | EnCFG_BarkerPream;         \
     VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
@@ -1026,7 +1026,7 @@
 
 #define MACvDisableBarkerPreambleMd(dwIoBase)            \
 {                                                        \
-    DWORD dwOrgValue;                                    \
+    unsigned long dwOrgValue;                            \
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
     dwOrgValue = dwOrgValue & ~EnCFG_BarkerPream;        \
     VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
@@ -1034,10 +1034,10 @@
 
 #define MACvSetBBType(dwIoBase, byTyp)                   \
 {                                                        \
-    DWORD dwOrgValue;                                    \
+    unsigned long dwOrgValue;                            \
     VNSvInPortD(dwIoBase + MAC_REG_ENCFG , &dwOrgValue); \
     dwOrgValue = dwOrgValue & ~EnCFG_BBType_MASK;        \
-    dwOrgValue = dwOrgValue | (DWORD) byTyp;             \
+    dwOrgValue = dwOrgValue | (unsigned long) byTyp;     \
     VNSvOutPortD(dwIoBase + MAC_REG_ENCFG, dwOrgValue);  \
 }
 
@@ -1074,78 +1074,81 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-extern WORD TxRate_iwconfig;//2008-5-8 <add> by chester
-void MACvReadAllRegs(DWORD_PTR dwIoBase, PBYTE pbyMacRegs);
-
-BOOL MACbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits);
-BOOL MACbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byRegOfs, BYTE byTestBits);
-
-BOOL MACbIsIntDisable(DWORD_PTR dwIoBase);
-
-BYTE MACbyReadMultiAddr(DWORD_PTR dwIoBase, UINT uByteIdx);
-void MACvWriteMultiAddr(DWORD_PTR dwIoBase, UINT uByteIdx, BYTE byData);
-void MACvSetMultiAddrByHash(DWORD_PTR dwIoBase, BYTE byHashIdx);
-void MACvResetMultiAddrByHash(DWORD_PTR dwIoBase, BYTE byHashIdx);
-
-void MACvSetRxThreshold(DWORD_PTR dwIoBase, BYTE byThreshold);
-void MACvGetRxThreshold(DWORD_PTR dwIoBase, PBYTE pbyThreshold);
-
-void MACvSetTxThreshold(DWORD_PTR dwIoBase, BYTE byThreshold);
-void MACvGetTxThreshold(DWORD_PTR dwIoBase, PBYTE pbyThreshold);
-
-void MACvSetDmaLength(DWORD_PTR dwIoBase, BYTE byDmaLength);
-void MACvGetDmaLength(DWORD_PTR dwIoBase, PBYTE pbyDmaLength);
-
-void MACvSetShortRetryLimit(DWORD_PTR dwIoBase, BYTE byRetryLimit);
-void MACvGetShortRetryLimit(DWORD_PTR dwIoBase, PBYTE pbyRetryLimit);
-
-void MACvSetLongRetryLimit(DWORD_PTR dwIoBase, BYTE byRetryLimit);
-void MACvGetLongRetryLimit(DWORD_PTR dwIoBase, PBYTE pbyRetryLimit);
-
-void MACvSetLoopbackMode(DWORD_PTR dwIoBase, BYTE byLoopbackMode);
-BOOL MACbIsInLoopbackMode(DWORD_PTR dwIoBase);
-
-void MACvSetPacketFilter(DWORD_PTR dwIoBase, WORD wFilterType);
-
-void MACvSaveContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
-void MACvRestoreContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
-BOOL MACbCompareContext(DWORD_PTR dwIoBase, PBYTE pbyCxtBuf);
-
-BOOL MACbSoftwareReset(DWORD_PTR dwIoBase);
-BOOL MACbSafeSoftwareReset(DWORD_PTR dwIoBase);
-BOOL MACbSafeRxOff(DWORD_PTR dwIoBase);
-BOOL MACbSafeTxOff(DWORD_PTR dwIoBase);
-BOOL MACbSafeStop(DWORD_PTR dwIoBase);
-BOOL MACbShutdown(DWORD_PTR dwIoBase);
-void MACvInitialize(DWORD_PTR dwIoBase);
-void MACvSetCurrRx0DescAddr(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrRx1DescAddr(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrTXDescAddr(int iTxType, DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrTx0DescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrAC0DescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrSyncDescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvSetCurrATIMDescAddrEx(DWORD_PTR dwIoBase, DWORD dwCurrDescAddr);
-void MACvTimer0MicroSDelay(DWORD_PTR dwIoBase, UINT uDelay);
-void MACvOneShotTimer0MicroSec(DWORD_PTR dwIoBase, UINT uDelayTime);
-void MACvOneShotTimer1MicroSec(DWORD_PTR dwIoBase, UINT uDelayTime);
-
-void MACvSetMISCFifo(DWORD_PTR dwIoBase, WORD wOffset, DWORD dwData);
-
-BOOL MACbTxDMAOff (DWORD_PTR dwIoBase, UINT idx);
-
-void MACvClearBusSusInd(DWORD_PTR dwIoBase);
-void MACvEnableBusSusEn(DWORD_PTR dwIoBase);
-
-BOOL MACbFlushSYNCFifo(DWORD_PTR dwIoBase);
-BOOL MACbPSWakeup(DWORD_PTR dwIoBase);
-
-void MACvSetKeyEntry(DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, UINT uKeyIdx, PBYTE pbyAddr, PDWORD pdwKey, BYTE byLocalID);
-void MACvDisableKeyEntry(DWORD_PTR dwIoBase, UINT uEntryIdx);
-void MACvSetDefaultKeyEntry(DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID);
-//void MACvEnableDefaultKey(DWORD_PTR dwIoBase, BYTE byLocalID);
-void MACvDisableDefaultKey(DWORD_PTR dwIoBase);
-void MACvSetDefaultTKIPKeyEntry(DWORD_PTR dwIoBase, UINT uKeyLen, UINT uKeyIdx, PDWORD pdwKey, BYTE byLocalID);
-void MACvSetDefaultKeyCtl(DWORD_PTR dwIoBase, WORD wKeyCtl, UINT uEntryIdx, BYTE byLocalID);
+extern unsigned short TxRate_iwconfig;//2008-5-8 <add> by chester
+void MACvReadAllRegs(unsigned long dwIoBase, unsigned char *pbyMacRegs);
+
+bool MACbIsRegBitsOn(unsigned long dwIoBase, unsigned char byRegOfs, unsigned char byTestBits);
+bool MACbIsRegBitsOff(unsigned long dwIoBase, unsigned char byRegOfs, unsigned char byTestBits);
+
+bool MACbIsIntDisable(unsigned long dwIoBase);
+
+unsigned char MACbyReadMultiAddr(unsigned long dwIoBase, unsigned int uByteIdx);
+void MACvWriteMultiAddr(unsigned long dwIoBase, unsigned int uByteIdx, unsigned char byData);
+void MACvSetMultiAddrByHash(unsigned long dwIoBase, unsigned char byHashIdx);
+void MACvResetMultiAddrByHash(unsigned long dwIoBase, unsigned char byHashIdx);
+
+void MACvSetRxThreshold(unsigned long dwIoBase, unsigned char byThreshold);
+void MACvGetRxThreshold(unsigned long dwIoBase, unsigned char *pbyThreshold);
+
+void MACvSetTxThreshold(unsigned long dwIoBase, unsigned char byThreshold);
+void MACvGetTxThreshold(unsigned long dwIoBase, unsigned char *pbyThreshold);
+
+void MACvSetDmaLength(unsigned long dwIoBase, unsigned char byDmaLength);
+void MACvGetDmaLength(unsigned long dwIoBase, unsigned char *pbyDmaLength);
+
+void MACvSetShortRetryLimit(unsigned long dwIoBase, unsigned char byRetryLimit);
+void MACvGetShortRetryLimit(unsigned long dwIoBase, unsigned char *pbyRetryLimit);
+
+void MACvSetLongRetryLimit(unsigned long dwIoBase, unsigned char byRetryLimit);
+void MACvGetLongRetryLimit(unsigned long dwIoBase, unsigned char *pbyRetryLimit);
+
+void MACvSetLoopbackMode(unsigned long dwIoBase, unsigned char byLoopbackMode);
+bool MACbIsInLoopbackMode(unsigned long dwIoBase);
+
+void MACvSetPacketFilter(unsigned long dwIoBase, unsigned short wFilterType);
+
+void MACvSaveContext(unsigned long dwIoBase, unsigned char *pbyCxtBuf);
+void MACvRestoreContext(unsigned long dwIoBase, unsigned char *pbyCxtBuf);
+bool MACbCompareContext(unsigned long dwIoBase, unsigned char *pbyCxtBuf);
+
+bool MACbSoftwareReset(unsigned long dwIoBase);
+bool MACbSafeSoftwareReset(unsigned long dwIoBase);
+bool MACbSafeRxOff(unsigned long dwIoBase);
+bool MACbSafeTxOff(unsigned long dwIoBase);
+bool MACbSafeStop(unsigned long dwIoBase);
+bool MACbShutdown(unsigned long dwIoBase);
+void MACvInitialize(unsigned long dwIoBase);
+void MACvSetCurrRx0DescAddr(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrRx1DescAddr(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrTXDescAddr(int iTxType, unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrTx0DescAddrEx(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrAC0DescAddrEx(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrSyncDescAddrEx(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvSetCurrATIMDescAddrEx(unsigned long dwIoBase, unsigned long dwCurrDescAddr);
+void MACvTimer0MicroSDelay(unsigned long dwIoBase, unsigned int uDelay);
+void MACvOneShotTimer0MicroSec(unsigned long dwIoBase, unsigned int uDelayTime);
+void MACvOneShotTimer1MicroSec(unsigned long dwIoBase, unsigned int uDelayTime);
+
+void MACvSetMISCFifo(unsigned long dwIoBase, unsigned short wOffset, unsigned long dwData);
+
+bool MACbTxDMAOff (unsigned long dwIoBase, unsigned int idx);
+
+void MACvClearBusSusInd(unsigned long dwIoBase);
+void MACvEnableBusSusEn(unsigned long dwIoBase);
+
+bool MACbFlushSYNCFifo(unsigned long dwIoBase);
+bool MACbPSWakeup(unsigned long dwIoBase);
+
+void MACvSetKeyEntry(unsigned long dwIoBase, unsigned short wKeyCtl, unsigned int uEntryIdx,
+		unsigned int uKeyIdx, unsigned char *pbyAddr, unsigned long *pdwKey, unsigned char byLocalID);
+void MACvDisableKeyEntry(unsigned long dwIoBase, unsigned int uEntryIdx);
+void MACvSetDefaultKeyEntry(unsigned long dwIoBase, unsigned int uKeyLen,
+		unsigned int uKeyIdx, unsigned long *pdwKey, unsigned char byLocalID);
+//void MACvEnableDefaultKey(unsigned long dwIoBase, unsigned char byLocalID);
+void MACvDisableDefaultKey(unsigned long dwIoBase);
+void MACvSetDefaultTKIPKeyEntry(unsigned long dwIoBase, unsigned int uKeyLen,
+		unsigned int uKeyIdx, unsigned long *pdwKey, unsigned char byLocalID);
+void MACvSetDefaultKeyCtl(unsigned long dwIoBase, unsigned short wKeyCtl, unsigned int uEntryIdx, unsigned char byLocalID);
 
 #endif // __MAC_H__
 
diff --git a/drivers/staging/vt6655/mib.c b/drivers/staging/vt6655/mib.c
index 4ca7877075b..1b91a837095 100644
--- a/drivers/staging/vt6655/mib.c
+++ b/drivers/staging/vt6655/mib.c
@@ -90,7 +90,7 @@ void STAvClearAllCounter (PSStatCounter pStatistic)
  * Return Value: none
  *
  */
-void STAvUpdateIsrStatCounter (PSStatCounter pStatistic, DWORD dwIsr)
+void STAvUpdateIsrStatCounter (PSStatCounter pStatistic, unsigned long dwIsr)
 {
     /**********************/
     /* ABNORMAL interrupt */
@@ -177,8 +177,8 @@ void STAvUpdateIsrStatCounter (PSStatCounter pStatistic, DWORD dwIsr)
  *
  */
 void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
-                              BYTE byRSR, BYTE byNewRSR, BYTE byRxRate,
-                              PBYTE pbyBuffer, UINT cbFrameLength)
+                              unsigned char byRSR, unsigned char byNewRSR, unsigned char byRxRate,
+                              unsigned char *pbyBuffer, unsigned int cbFrameLength)
 {
     //need change
     PS802_11Header pHeader = (PS802_11Header)pbyBuffer;
@@ -194,15 +194,15 @@ void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
             // update counters in case that successful transmit
             if (byRSR & RSR_ADDRBROAD) {
                 pStatistic->ullRxBroadcastFrames++;
-                pStatistic->ullRxBroadcastBytes += (ULONGLONG)cbFrameLength;
+                pStatistic->ullRxBroadcastBytes += (unsigned long long) cbFrameLength;
             }
             else if (byRSR & RSR_ADDRMULTI) {
                 pStatistic->ullRxMulticastFrames++;
-                pStatistic->ullRxMulticastBytes += (ULONGLONG)cbFrameLength;
+                pStatistic->ullRxMulticastBytes += (unsigned long long) cbFrameLength;
             }
             else {
                 pStatistic->ullRxDirectedFrames++;
-                pStatistic->ullRxDirectedBytes += (ULONGLONG)cbFrameLength;
+                pStatistic->ullRxDirectedBytes += (unsigned long long) cbFrameLength;
             }
         }
     }
@@ -212,87 +212,87 @@ void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr11MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"11M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr11M, (INT)pStatistic->CustomStat.ullRsr11MCRCOk, byRSR);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"11M: ALL[%d], OK[%d]:[%02x]\n", (int)pStatistic->CustomStat.ullRsr11M, (int)pStatistic->CustomStat.ullRsr11MCRCOk, byRSR);
     }
     else if(byRxRate==11) {
         pStatistic->CustomStat.ullRsr5M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr5MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 5M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr5M, (INT)pStatistic->CustomStat.ullRsr5MCRCOk, byRSR);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 5M: ALL[%d], OK[%d]:[%02x]\n", (int)pStatistic->CustomStat.ullRsr5M, (int)pStatistic->CustomStat.ullRsr5MCRCOk, byRSR);
     }
     else if(byRxRate==4) {
         pStatistic->CustomStat.ullRsr2M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr2MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 2M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr2M, (INT)pStatistic->CustomStat.ullRsr2MCRCOk, byRSR);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 2M: ALL[%d], OK[%d]:[%02x]\n", (int)pStatistic->CustomStat.ullRsr2M, (int)pStatistic->CustomStat.ullRsr2MCRCOk, byRSR);
     }
     else if(byRxRate==2){
         pStatistic->CustomStat.ullRsr1M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr1MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 1M: ALL[%d], OK[%d]:[%02x]\n", (INT)pStatistic->CustomStat.ullRsr1M, (INT)pStatistic->CustomStat.ullRsr1MCRCOk, byRSR);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 1M: ALL[%d], OK[%d]:[%02x]\n", (int)pStatistic->CustomStat.ullRsr1M, (int)pStatistic->CustomStat.ullRsr1MCRCOk, byRSR);
     }
     else if(byRxRate==12){
         pStatistic->CustomStat.ullRsr6M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr6MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 6M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr6M, (INT)pStatistic->CustomStat.ullRsr6MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 6M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr6M, (int)pStatistic->CustomStat.ullRsr6MCRCOk);
     }
     else if(byRxRate==18){
         pStatistic->CustomStat.ullRsr9M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr9MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 9M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr9M, (INT)pStatistic->CustomStat.ullRsr9MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" 9M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr9M, (int)pStatistic->CustomStat.ullRsr9MCRCOk);
     }
     else if(byRxRate==24){
         pStatistic->CustomStat.ullRsr12M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr12MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"12M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr12M, (INT)pStatistic->CustomStat.ullRsr12MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"12M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr12M, (int)pStatistic->CustomStat.ullRsr12MCRCOk);
     }
     else if(byRxRate==36){
         pStatistic->CustomStat.ullRsr18M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr18MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"18M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr18M, (INT)pStatistic->CustomStat.ullRsr18MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"18M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr18M, (int)pStatistic->CustomStat.ullRsr18MCRCOk);
     }
     else if(byRxRate==48){
         pStatistic->CustomStat.ullRsr24M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr24MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"24M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr24M, (INT)pStatistic->CustomStat.ullRsr24MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"24M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr24M, (int)pStatistic->CustomStat.ullRsr24MCRCOk);
     }
     else if(byRxRate==72){
         pStatistic->CustomStat.ullRsr36M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr36MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"36M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr36M, (INT)pStatistic->CustomStat.ullRsr36MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"36M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr36M, (int)pStatistic->CustomStat.ullRsr36MCRCOk);
     }
     else if(byRxRate==96){
         pStatistic->CustomStat.ullRsr48M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr48MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"48M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr48M, (INT)pStatistic->CustomStat.ullRsr48MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"48M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr48M, (int)pStatistic->CustomStat.ullRsr48MCRCOk);
     }
     else if(byRxRate==108){
         pStatistic->CustomStat.ullRsr54M++;
         if(byRSR & RSR_CRCOK) {
             pStatistic->CustomStat.ullRsr54MCRCOk++;
         }
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"54M: ALL[%d], OK[%d]\n", (INT)pStatistic->CustomStat.ullRsr54M, (INT)pStatistic->CustomStat.ullRsr54MCRCOk);
+        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"54M: ALL[%d], OK[%d]\n", (int)pStatistic->CustomStat.ullRsr54M, (int)pStatistic->CustomStat.ullRsr54MCRCOk);
     }
     else {
-    	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Unknown: Total[%d], CRCOK[%d]\n", (INT)pStatistic->dwRsrRxPacket+1, (INT)pStatistic->dwRsrCRCOk);
+    	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Unknown: Total[%d], CRCOK[%d]\n", (int)pStatistic->dwRsrRxPacket+1, (int)pStatistic->dwRsrCRCOk);
     }
 
     if (byRSR & RSR_BSSIDOK)
@@ -341,10 +341,10 @@ void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
     if (WLAN_GET_FC_MOREFRAG(pHeader->wFrameCtl))
         pStatistic->dwRsrRxFragment++;
 
-    if (cbFrameLength < MIN_PACKET_LEN + 4) {
+    if (cbFrameLength < ETH_ZLEN + 4) {
         pStatistic->dwRsrRunt++;
     }
-    else if (cbFrameLength == MIN_PACKET_LEN + 4) {
+    else if (cbFrameLength == ETH_ZLEN + 4) {
         pStatistic->dwRsrRxFrmLen64++;
     }
     else if ((65 <= cbFrameLength) && (cbFrameLength <= 127)) {
@@ -389,11 +389,11 @@ void STAvUpdateRDStatCounter (PSStatCounter pStatistic,
 void
 STAvUpdateRDStatCounterEx (
     PSStatCounter   pStatistic,
-    BYTE            byRSR,
-    BYTE            byNewRSR,
-    BYTE            byRxRate,
-    PBYTE           pbyBuffer,
-    UINT            cbFrameLength
+    unsigned char byRSR,
+    unsigned char byNewRSR,
+    unsigned char byRxRate,
+    unsigned char *pbyBuffer,
+    unsigned int cbFrameLength
     )
 {
     STAvUpdateRDStatCounter(
@@ -408,7 +408,7 @@ STAvUpdateRDStatCounterEx (
     // rx length
     pStatistic->dwCntRxFrmLength = cbFrameLength;
     // rx pattern, we just see 10 bytes for sample
-    memcpy(pStatistic->abyCntRxPattern, (PBYTE)pbyBuffer, 10);
+    memcpy(pStatistic->abyCntRxPattern, (unsigned char *)pbyBuffer, 10);
 }
 
 
@@ -432,16 +432,16 @@ STAvUpdateRDStatCounterEx (
 void
 STAvUpdateTDStatCounter (
     PSStatCounter   pStatistic,
-    BYTE            byTSR0,
-    BYTE            byTSR1,
-    PBYTE           pbyBuffer,
-    UINT            cbFrameLength,
-    UINT            uIdx
+    unsigned char byTSR0,
+    unsigned char byTSR1,
+    unsigned char *pbyBuffer,
+    unsigned int cbFrameLength,
+    unsigned int uIdx
     )
 {
     PWLAN_80211HDR_A4   pHeader;
-    PBYTE               pbyDestAddr;
-    BYTE                byTSR0_NCR = byTSR0 & TSR0_NCR;
+    unsigned char *pbyDestAddr;
+    unsigned char byTSR0_NCR = byTSR0 & TSR0_NCR;
 
 
 
@@ -471,17 +471,17 @@ STAvUpdateTDStatCounter (
         pStatistic->CustomStat.ullTsrAllOK =
             (pStatistic->ullTsrOK[TYPE_AC0DMA] + pStatistic->ullTsrOK[TYPE_TXDMA0]);
         // update counters in case that successful transmit
-        if (IS_BROADCAST_ADDRESS(pbyDestAddr)) {
+        if (is_broadcast_ether_addr(pbyDestAddr)) {
             pStatistic->ullTxBroadcastFrames[uIdx]++;
-            pStatistic->ullTxBroadcastBytes[uIdx] += (ULONGLONG)cbFrameLength;
+            pStatistic->ullTxBroadcastBytes[uIdx] += (unsigned long long) cbFrameLength;
         }
-        else if (IS_MULTICAST_ADDRESS(pbyDestAddr)) {
+        else if (is_multicast_ether_addr(pbyDestAddr)) {
             pStatistic->ullTxMulticastFrames[uIdx]++;
-            pStatistic->ullTxMulticastBytes[uIdx] += (ULONGLONG)cbFrameLength;
+            pStatistic->ullTxMulticastBytes[uIdx] += (unsigned long long) cbFrameLength;
         }
         else {
             pStatistic->ullTxDirectedFrames[uIdx]++;
-            pStatistic->ullTxDirectedBytes[uIdx] += (ULONGLONG)cbFrameLength;
+            pStatistic->ullTxDirectedBytes[uIdx] += (unsigned long long) cbFrameLength;
         }
     }
     else {
@@ -495,9 +495,9 @@ STAvUpdateTDStatCounter (
             pStatistic->dwTsrACKData[uIdx]++;
     }
 
-    if (IS_BROADCAST_ADDRESS(pbyDestAddr))
+    if (is_broadcast_ether_addr(pbyDestAddr))
         pStatistic->dwTsrBroadcast[uIdx]++;
-    else if (IS_MULTICAST_ADDRESS(pbyDestAddr))
+    else if (is_multicast_ether_addr(pbyDestAddr))
         pStatistic->dwTsrMulticast[uIdx]++;
     else
         pStatistic->dwTsrDirected[uIdx]++;
@@ -522,13 +522,13 @@ STAvUpdateTDStatCounter (
 void
 STAvUpdateTDStatCounterEx (
     PSStatCounter   pStatistic,
-    PBYTE           pbyBuffer,
-    DWORD           cbFrameLength
+    unsigned char *pbyBuffer,
+    unsigned long cbFrameLength
     )
 {
-    UINT    uPktLength;
+    unsigned int uPktLength;
 
-    uPktLength = (UINT)cbFrameLength;
+    uPktLength = (unsigned int)cbFrameLength;
 
     // tx length
     pStatistic->dwCntTxBufLength = uPktLength;
@@ -555,25 +555,25 @@ void
 STAvUpdate802_11Counter(
     PSDot11Counters         p802_11Counter,
     PSStatCounter           pStatistic,
-    DWORD                   dwCounter
+    unsigned long dwCounter
     )
 {
     //p802_11Counter->TransmittedFragmentCount
-    p802_11Counter->MulticastTransmittedFrameCount = (ULONGLONG) (pStatistic->dwTsrBroadcast[TYPE_AC0DMA] +
+    p802_11Counter->MulticastTransmittedFrameCount = (unsigned long long) (pStatistic->dwTsrBroadcast[TYPE_AC0DMA] +
                                                                   pStatistic->dwTsrBroadcast[TYPE_TXDMA0] +
                                                                   pStatistic->dwTsrMulticast[TYPE_AC0DMA] +
                                                                   pStatistic->dwTsrMulticast[TYPE_TXDMA0]);
-    p802_11Counter->FailedCount = (ULONGLONG) (pStatistic->dwTsrErr[TYPE_AC0DMA] + pStatistic->dwTsrErr[TYPE_TXDMA0]);
-    p802_11Counter->RetryCount = (ULONGLONG) (pStatistic->dwTsrRetry[TYPE_AC0DMA] + pStatistic->dwTsrRetry[TYPE_TXDMA0]);
-    p802_11Counter->MultipleRetryCount = (ULONGLONG) (pStatistic->dwTsrMoreThanOnceRetry[TYPE_AC0DMA] +
+    p802_11Counter->FailedCount = (unsigned long long) (pStatistic->dwTsrErr[TYPE_AC0DMA] + pStatistic->dwTsrErr[TYPE_TXDMA0]);
+    p802_11Counter->RetryCount = (unsigned long long) (pStatistic->dwTsrRetry[TYPE_AC0DMA] + pStatistic->dwTsrRetry[TYPE_TXDMA0]);
+    p802_11Counter->MultipleRetryCount = (unsigned long long) (pStatistic->dwTsrMoreThanOnceRetry[TYPE_AC0DMA] +
                                                           pStatistic->dwTsrMoreThanOnceRetry[TYPE_TXDMA0]);
     //p802_11Counter->FrameDuplicateCount
-    p802_11Counter->RTSSuccessCount += (ULONGLONG)  (dwCounter & 0x000000ff);
-    p802_11Counter->RTSFailureCount += (ULONGLONG) ((dwCounter & 0x0000ff00) >> 8);
-    p802_11Counter->ACKFailureCount += (ULONGLONG) ((dwCounter & 0x00ff0000) >> 16);
-    p802_11Counter->FCSErrorCount +=   (ULONGLONG) ((dwCounter & 0xff000000) >> 24);
+    p802_11Counter->RTSSuccessCount += (unsigned long long)  (dwCounter & 0x000000ff);
+    p802_11Counter->RTSFailureCount += (unsigned long long) ((dwCounter & 0x0000ff00) >> 8);
+    p802_11Counter->ACKFailureCount += (unsigned long long) ((dwCounter & 0x00ff0000) >> 16);
+    p802_11Counter->FCSErrorCount +=   (unsigned long long) ((dwCounter & 0xff000000) >> 24);
     //p802_11Counter->ReceivedFragmentCount
-    p802_11Counter->MulticastReceivedFrameCount = (ULONGLONG) (pStatistic->dwRsrBroadcast +
+    p802_11Counter->MulticastReceivedFrameCount = (unsigned long long) (pStatistic->dwRsrBroadcast +
                                                                pStatistic->dwRsrMulticast);
 }
 
diff --git a/drivers/staging/vt6655/mib.h b/drivers/staging/vt6655/mib.h
index 2308319a405..009f3a4d29f 100644
--- a/drivers/staging/vt6655/mib.h
+++ b/drivers/staging/vt6655/mib.h
@@ -39,32 +39,32 @@
 //
 
 typedef struct tagSDot11Counters {
-    ULONG       Length;             // Length of structure
-    ULONGLONG   TransmittedFragmentCount;
-    ULONGLONG   MulticastTransmittedFrameCount;
-    ULONGLONG   FailedCount;
-    ULONGLONG   RetryCount;
-    ULONGLONG   MultipleRetryCount;
-    ULONGLONG   RTSSuccessCount;
-    ULONGLONG   RTSFailureCount;
-    ULONGLONG   ACKFailureCount;
-    ULONGLONG   FrameDuplicateCount;
-    ULONGLONG   ReceivedFragmentCount;
-    ULONGLONG   MulticastReceivedFrameCount;
-    ULONGLONG   FCSErrorCount;
-    ULONGLONG   TKIPLocalMICFailures;
-    ULONGLONG   TKIPRemoteMICFailures;
-    ULONGLONG   TKIPICVErrors;
-    ULONGLONG   TKIPCounterMeasuresInvoked;
-    ULONGLONG   TKIPReplays;
-    ULONGLONG   CCMPFormatErrors;
-    ULONGLONG   CCMPReplays;
-    ULONGLONG   CCMPDecryptErrors;
-    ULONGLONG   FourWayHandshakeFailures;
-//    ULONGLONG   WEPUndecryptableCount;
-//    ULONGLONG   WEPICVErrorCount;
-//    ULONGLONG   DecryptSuccessCount;
-//    ULONGLONG   DecryptFailureCount;
+    unsigned long Length;             // Length of structure
+    unsigned long long   TransmittedFragmentCount;
+    unsigned long long   MulticastTransmittedFrameCount;
+    unsigned long long   FailedCount;
+    unsigned long long   RetryCount;
+    unsigned long long   MultipleRetryCount;
+    unsigned long long   RTSSuccessCount;
+    unsigned long long   RTSFailureCount;
+    unsigned long long   ACKFailureCount;
+    unsigned long long   FrameDuplicateCount;
+    unsigned long long   ReceivedFragmentCount;
+    unsigned long long   MulticastReceivedFrameCount;
+    unsigned long long   FCSErrorCount;
+    unsigned long long   TKIPLocalMICFailures;
+    unsigned long long   TKIPRemoteMICFailures;
+    unsigned long long   TKIPICVErrors;
+    unsigned long long   TKIPCounterMeasuresInvoked;
+    unsigned long long   TKIPReplays;
+    unsigned long long   CCMPFormatErrors;
+    unsigned long long   CCMPReplays;
+    unsigned long long   CCMPDecryptErrors;
+    unsigned long long   FourWayHandshakeFailures;
+//    unsigned long long   WEPUndecryptableCount;
+//    unsigned long long   WEPICVErrorCount;
+//    unsigned long long   DecryptSuccessCount;
+//    unsigned long long   DecryptFailureCount;
 } SDot11Counters, *PSDot11Counters;
 
 
@@ -72,29 +72,29 @@ typedef struct tagSDot11Counters {
 // MIB2 counter
 //
 typedef struct tagSMib2Counter {
-    LONG    ifIndex;
+    long    ifIndex;
     char    ifDescr[256];               // max size 255 plus zero ending
                                         // e.g. "interface 1"
-    LONG    ifType;
-    LONG    ifMtu;
-    DWORD   ifSpeed;
-    BYTE    ifPhysAddress[ETH_ALEN];
-    LONG    ifAdminStatus;
-    LONG    ifOperStatus;
-    DWORD   ifLastChange;
-    DWORD   ifInOctets;
-    DWORD   ifInUcastPkts;
-    DWORD   ifInNUcastPkts;
-    DWORD   ifInDiscards;
-    DWORD   ifInErrors;
-    DWORD   ifInUnknownProtos;
-    DWORD   ifOutOctets;
-    DWORD   ifOutUcastPkts;
-    DWORD   ifOutNUcastPkts;
-    DWORD   ifOutDiscards;
-    DWORD   ifOutErrors;
-    DWORD   ifOutQLen;
-    DWORD   ifSpecific;
+    long    ifType;
+    long    ifMtu;
+    unsigned long ifSpeed;
+    unsigned char ifPhysAddress[ETH_ALEN];
+    long    ifAdminStatus;
+    long    ifOperStatus;
+    unsigned long ifLastChange;
+    unsigned long ifInOctets;
+    unsigned long ifInUcastPkts;
+    unsigned long ifInNUcastPkts;
+    unsigned long ifInDiscards;
+    unsigned long ifInErrors;
+    unsigned long ifInUnknownProtos;
+    unsigned long ifOutOctets;
+    unsigned long ifOutUcastPkts;
+    unsigned long ifOutNUcastPkts;
+    unsigned long ifOutDiscards;
+    unsigned long ifOutErrors;
+    unsigned long ifOutQLen;
+    unsigned long ifSpecific;
 } SMib2Counter, *PSMib2Counter;
 
 // Value in the ifType entry
@@ -111,64 +111,64 @@ typedef struct tagSMib2Counter {
 // RMON counter
 //
 typedef struct tagSRmonCounter {
-    LONG    etherStatsIndex;
-    DWORD   etherStatsDataSource;
-    DWORD   etherStatsDropEvents;
-    DWORD   etherStatsOctets;
-    DWORD   etherStatsPkts;
-    DWORD   etherStatsBroadcastPkts;
-    DWORD   etherStatsMulticastPkts;
-    DWORD   etherStatsCRCAlignErrors;
-    DWORD   etherStatsUndersizePkts;
-    DWORD   etherStatsOversizePkts;
-    DWORD   etherStatsFragments;
-    DWORD   etherStatsJabbers;
-    DWORD   etherStatsCollisions;
-    DWORD   etherStatsPkt64Octets;
-    DWORD   etherStatsPkt65to127Octets;
-    DWORD   etherStatsPkt128to255Octets;
-    DWORD   etherStatsPkt256to511Octets;
-    DWORD   etherStatsPkt512to1023Octets;
-    DWORD   etherStatsPkt1024to1518Octets;
-    DWORD   etherStatsOwners;
-    DWORD   etherStatsStatus;
+    long    etherStatsIndex;
+    unsigned long etherStatsDataSource;
+    unsigned long etherStatsDropEvents;
+    unsigned long etherStatsOctets;
+    unsigned long etherStatsPkts;
+    unsigned long etherStatsBroadcastPkts;
+    unsigned long etherStatsMulticastPkts;
+    unsigned long etherStatsCRCAlignErrors;
+    unsigned long etherStatsUndersizePkts;
+    unsigned long etherStatsOversizePkts;
+    unsigned long etherStatsFragments;
+    unsigned long etherStatsJabbers;
+    unsigned long etherStatsCollisions;
+    unsigned long etherStatsPkt64Octets;
+    unsigned long etherStatsPkt65to127Octets;
+    unsigned long etherStatsPkt128to255Octets;
+    unsigned long etherStatsPkt256to511Octets;
+    unsigned long etherStatsPkt512to1023Octets;
+    unsigned long etherStatsPkt1024to1518Octets;
+    unsigned long etherStatsOwners;
+    unsigned long etherStatsStatus;
 } SRmonCounter, *PSRmonCounter;
 
 //
 // Custom counter
 //
 typedef struct tagSCustomCounters {
-    ULONG       Length;
-
-    ULONGLONG   ullTsrAllOK;
-
-    ULONGLONG   ullRsr11M;
-    ULONGLONG   ullRsr5M;
-    ULONGLONG   ullRsr2M;
-    ULONGLONG   ullRsr1M;
-
-    ULONGLONG   ullRsr11MCRCOk;
-    ULONGLONG   ullRsr5MCRCOk;
-    ULONGLONG   ullRsr2MCRCOk;
-    ULONGLONG   ullRsr1MCRCOk;
-
-    ULONGLONG   ullRsr54M;
-    ULONGLONG   ullRsr48M;
-    ULONGLONG   ullRsr36M;
-    ULONGLONG   ullRsr24M;
-    ULONGLONG   ullRsr18M;
-    ULONGLONG   ullRsr12M;
-    ULONGLONG   ullRsr9M;
-    ULONGLONG   ullRsr6M;
-
-    ULONGLONG   ullRsr54MCRCOk;
-    ULONGLONG   ullRsr48MCRCOk;
-    ULONGLONG   ullRsr36MCRCOk;
-    ULONGLONG   ullRsr24MCRCOk;
-    ULONGLONG   ullRsr18MCRCOk;
-    ULONGLONG   ullRsr12MCRCOk;
-    ULONGLONG   ullRsr9MCRCOk;
-    ULONGLONG   ullRsr6MCRCOk;
+    unsigned long Length;
+
+    unsigned long long   ullTsrAllOK;
+
+    unsigned long long   ullRsr11M;
+    unsigned long long   ullRsr5M;
+    unsigned long long   ullRsr2M;
+    unsigned long long   ullRsr1M;
+
+    unsigned long long   ullRsr11MCRCOk;
+    unsigned long long   ullRsr5MCRCOk;
+    unsigned long long   ullRsr2MCRCOk;
+    unsigned long long   ullRsr1MCRCOk;
+
+    unsigned long long   ullRsr54M;
+    unsigned long long   ullRsr48M;
+    unsigned long long   ullRsr36M;
+    unsigned long long   ullRsr24M;
+    unsigned long long   ullRsr18M;
+    unsigned long long   ullRsr12M;
+    unsigned long long   ullRsr9M;
+    unsigned long long   ullRsr6M;
+
+    unsigned long long   ullRsr54MCRCOk;
+    unsigned long long   ullRsr48MCRCOk;
+    unsigned long long   ullRsr36MCRCOk;
+    unsigned long long   ullRsr24MCRCOk;
+    unsigned long long   ullRsr18MCRCOk;
+    unsigned long long   ullRsr12MCRCOk;
+    unsigned long long   ullRsr9MCRCOk;
+    unsigned long long   ullRsr6MCRCOk;
 
 } SCustomCounters, *PSCustomCounters;
 
@@ -177,29 +177,29 @@ typedef struct tagSCustomCounters {
 // Custom counter
 //
 typedef struct tagSISRCounters {
-    ULONG   Length;
-
-    DWORD   dwIsrTx0OK;
-    DWORD   dwIsrAC0TxOK;
-    DWORD   dwIsrBeaconTxOK;
-    DWORD   dwIsrRx0OK;
-    DWORD   dwIsrTBTTInt;
-    DWORD   dwIsrSTIMERInt;
-    DWORD   dwIsrWatchDog;
-    DWORD   dwIsrUnrecoverableError;
-    DWORD   dwIsrSoftInterrupt;
-    DWORD   dwIsrMIBNearfull;
-    DWORD   dwIsrRxNoBuf;
-
-    DWORD   dwIsrUnknown;               // unknown interrupt count
-
-    DWORD   dwIsrRx1OK;
-    DWORD   dwIsrATIMTxOK;
-    DWORD   dwIsrSYNCTxOK;
-    DWORD   dwIsrCFPEnd;
-    DWORD   dwIsrATIMEnd;
-    DWORD   dwIsrSYNCFlushOK;
-    DWORD   dwIsrSTIMER1Int;
+    unsigned long Length;
+
+    unsigned long dwIsrTx0OK;
+    unsigned long dwIsrAC0TxOK;
+    unsigned long dwIsrBeaconTxOK;
+    unsigned long dwIsrRx0OK;
+    unsigned long dwIsrTBTTInt;
+    unsigned long dwIsrSTIMERInt;
+    unsigned long dwIsrWatchDog;
+    unsigned long dwIsrUnrecoverableError;
+    unsigned long dwIsrSoftInterrupt;
+    unsigned long dwIsrMIBNearfull;
+    unsigned long dwIsrRxNoBuf;
+
+    unsigned long dwIsrUnknown;               // unknown interrupt count
+
+    unsigned long dwIsrRx1OK;
+    unsigned long dwIsrATIMTxOK;
+    unsigned long dwIsrSYNCTxOK;
+    unsigned long dwIsrCFPEnd;
+    unsigned long dwIsrATIMEnd;
+    unsigned long dwIsrSYNCFlushOK;
+    unsigned long dwIsrSTIMER1Int;
     /////////////////////////////////////
 } SISRCounters, *PSISRCounters;
 
@@ -222,99 +222,99 @@ typedef struct tagSStatCounter {
 
     // RSR status count
     //
-    DWORD   dwRsrFrmAlgnErr;
-    DWORD   dwRsrErr;
-    DWORD   dwRsrCRCErr;
-    DWORD   dwRsrCRCOk;
-    DWORD   dwRsrBSSIDOk;
-    DWORD   dwRsrADDROk;
-    DWORD   dwRsrBCNSSIDOk;
-    DWORD   dwRsrLENErr;
-    DWORD   dwRsrTYPErr;
-
-    DWORD   dwNewRsrDECRYPTOK;
-    DWORD   dwNewRsrCFP;
-    DWORD   dwNewRsrUTSF;
-    DWORD   dwNewRsrHITAID;
-    DWORD   dwNewRsrHITAID0;
-
-    DWORD   dwRsrLong;
-    DWORD   dwRsrRunt;
-
-    DWORD   dwRsrRxControl;
-    DWORD   dwRsrRxData;
-    DWORD   dwRsrRxManage;
-
-    DWORD   dwRsrRxPacket;
-    DWORD   dwRsrRxOctet;
-    DWORD   dwRsrBroadcast;
-    DWORD   dwRsrMulticast;
-    DWORD   dwRsrDirected;
+    unsigned long dwRsrFrmAlgnErr;
+    unsigned long dwRsrErr;
+    unsigned long dwRsrCRCErr;
+    unsigned long dwRsrCRCOk;
+    unsigned long dwRsrBSSIDOk;
+    unsigned long dwRsrADDROk;
+    unsigned long dwRsrBCNSSIDOk;
+    unsigned long dwRsrLENErr;
+    unsigned long dwRsrTYPErr;
+
+    unsigned long dwNewRsrDECRYPTOK;
+    unsigned long dwNewRsrCFP;
+    unsigned long dwNewRsrUTSF;
+    unsigned long dwNewRsrHITAID;
+    unsigned long dwNewRsrHITAID0;
+
+    unsigned long dwRsrLong;
+    unsigned long dwRsrRunt;
+
+    unsigned long dwRsrRxControl;
+    unsigned long dwRsrRxData;
+    unsigned long dwRsrRxManage;
+
+    unsigned long dwRsrRxPacket;
+    unsigned long dwRsrRxOctet;
+    unsigned long dwRsrBroadcast;
+    unsigned long dwRsrMulticast;
+    unsigned long dwRsrDirected;
     // 64-bit OID
-    ULONGLONG   ullRsrOK;
+    unsigned long long   ullRsrOK;
 
     // for some optional OIDs (64 bits) and DMI support
-    ULONGLONG   ullRxBroadcastBytes;
-    ULONGLONG   ullRxMulticastBytes;
-    ULONGLONG   ullRxDirectedBytes;
-    ULONGLONG   ullRxBroadcastFrames;
-    ULONGLONG   ullRxMulticastFrames;
-    ULONGLONG   ullRxDirectedFrames;
-
-    DWORD   dwRsrRxFragment;
-    DWORD   dwRsrRxFrmLen64;
-    DWORD   dwRsrRxFrmLen65_127;
-    DWORD   dwRsrRxFrmLen128_255;
-    DWORD   dwRsrRxFrmLen256_511;
-    DWORD   dwRsrRxFrmLen512_1023;
-    DWORD   dwRsrRxFrmLen1024_1518;
+    unsigned long long   ullRxBroadcastBytes;
+    unsigned long long   ullRxMulticastBytes;
+    unsigned long long   ullRxDirectedBytes;
+    unsigned long long   ullRxBroadcastFrames;
+    unsigned long long   ullRxMulticastFrames;
+    unsigned long long   ullRxDirectedFrames;
+
+    unsigned long dwRsrRxFragment;
+    unsigned long dwRsrRxFrmLen64;
+    unsigned long dwRsrRxFrmLen65_127;
+    unsigned long dwRsrRxFrmLen128_255;
+    unsigned long dwRsrRxFrmLen256_511;
+    unsigned long dwRsrRxFrmLen512_1023;
+    unsigned long dwRsrRxFrmLen1024_1518;
 
     // TSR status count
     //
-    DWORD   dwTsrTotalRetry[TYPE_MAXTD];        // total collision retry count
-    DWORD   dwTsrOnceRetry[TYPE_MAXTD];         // this packet only occur one collision
-    DWORD   dwTsrMoreThanOnceRetry[TYPE_MAXTD]; // this packet occur more than one collision
-    DWORD   dwTsrRetry[TYPE_MAXTD];             // this packet has ever occur collision,
+    unsigned long dwTsrTotalRetry[TYPE_MAXTD];        // total collision retry count
+    unsigned long dwTsrOnceRetry[TYPE_MAXTD];         // this packet only occur one collision
+    unsigned long dwTsrMoreThanOnceRetry[TYPE_MAXTD]; // this packet occur more than one collision
+    unsigned long dwTsrRetry[TYPE_MAXTD];             // this packet has ever occur collision,
                                          // that is (dwTsrOnceCollision0 + dwTsrMoreThanOnceCollision0)
-    DWORD   dwTsrACKData[TYPE_MAXTD];
-    DWORD   dwTsrErr[TYPE_MAXTD];
-    DWORD   dwAllTsrOK[TYPE_MAXTD];
-    DWORD   dwTsrRetryTimeout[TYPE_MAXTD];
-    DWORD   dwTsrTransmitTimeout[TYPE_MAXTD];
-
-    DWORD   dwTsrTxPacket[TYPE_MAXTD];
-    DWORD   dwTsrTxOctet[TYPE_MAXTD];
-    DWORD   dwTsrBroadcast[TYPE_MAXTD];
-    DWORD   dwTsrMulticast[TYPE_MAXTD];
-    DWORD   dwTsrDirected[TYPE_MAXTD];
+    unsigned long dwTsrACKData[TYPE_MAXTD];
+    unsigned long dwTsrErr[TYPE_MAXTD];
+    unsigned long dwAllTsrOK[TYPE_MAXTD];
+    unsigned long dwTsrRetryTimeout[TYPE_MAXTD];
+    unsigned long dwTsrTransmitTimeout[TYPE_MAXTD];
+
+    unsigned long dwTsrTxPacket[TYPE_MAXTD];
+    unsigned long dwTsrTxOctet[TYPE_MAXTD];
+    unsigned long dwTsrBroadcast[TYPE_MAXTD];
+    unsigned long dwTsrMulticast[TYPE_MAXTD];
+    unsigned long dwTsrDirected[TYPE_MAXTD];
 
     // RD/TD count
-    DWORD   dwCntRxFrmLength;
-    DWORD   dwCntTxBufLength;
+    unsigned long dwCntRxFrmLength;
+    unsigned long dwCntTxBufLength;
 
-    BYTE    abyCntRxPattern[16];
-    BYTE    abyCntTxPattern[16];
+    unsigned char abyCntRxPattern[16];
+    unsigned char abyCntTxPattern[16];
 
 
 
     // Software check....
-    DWORD   dwCntRxDataErr;             // rx buffer data software compare CRC err count
-    DWORD   dwCntDecryptErr;            // rx buffer data software compare CRC err count
-    DWORD   dwCntRxICVErr;              // rx buffer data software compare CRC err count
-    UINT    idxRxErrorDesc[TYPE_MAXRD]; // index for rx data error RD
+    unsigned long dwCntRxDataErr;             // rx buffer data software compare CRC err count
+    unsigned long dwCntDecryptErr;            // rx buffer data software compare CRC err count
+    unsigned long dwCntRxICVErr;              // rx buffer data software compare CRC err count
+    unsigned int idxRxErrorDesc[TYPE_MAXRD]; // index for rx data error RD
 
     // 64-bit OID
-    ULONGLONG   ullTsrOK[TYPE_MAXTD];
+    unsigned long long   ullTsrOK[TYPE_MAXTD];
 
     // for some optional OIDs (64 bits) and DMI support
-    ULONGLONG   ullTxBroadcastFrames[TYPE_MAXTD];
-    ULONGLONG   ullTxMulticastFrames[TYPE_MAXTD];
-    ULONGLONG   ullTxDirectedFrames[TYPE_MAXTD];
-    ULONGLONG   ullTxBroadcastBytes[TYPE_MAXTD];
-    ULONGLONG   ullTxMulticastBytes[TYPE_MAXTD];
-    ULONGLONG   ullTxDirectedBytes[TYPE_MAXTD];
-
-//    DWORD   dwTxRetryCount[8];
+    unsigned long long   ullTxBroadcastFrames[TYPE_MAXTD];
+    unsigned long long   ullTxMulticastFrames[TYPE_MAXTD];
+    unsigned long long   ullTxDirectedFrames[TYPE_MAXTD];
+    unsigned long long   ullTxBroadcastBytes[TYPE_MAXTD];
+    unsigned long long   ullTxMulticastBytes[TYPE_MAXTD];
+    unsigned long long   ullTxDirectedBytes[TYPE_MAXTD];
+
+//    unsigned long dwTxRetryCount[8];
     //
     // ISR status count
     //
@@ -324,15 +324,15 @@ typedef struct tagSStatCounter {
 
    #ifdef Calcu_LinkQual
        //Tx count:
-    ULONG TxNoRetryOkCount;         //success tx no retry !
-    ULONG TxRetryOkCount;              //success tx but retry !
-    ULONG TxFailCount;                      //fail tx ?
+    unsigned long TxNoRetryOkCount;         //success tx no retry !
+    unsigned long TxRetryOkCount;              //success tx but retry !
+    unsigned long TxFailCount;                      //fail tx ?
       //Rx count:
-    ULONG RxOkCnt;                          //success rx !
-    ULONG RxFcsErrCnt;                    //fail rx ?
+    unsigned long RxOkCnt;                          //success rx !
+    unsigned long RxFcsErrCnt;                    //fail rx ?
       //statistic
-    ULONG SignalStren;
-    ULONG LinkQuality;
+    unsigned long SignalStren;
+    unsigned long LinkQuality;
    #endif
 } SStatCounter, *PSStatCounter;
 
@@ -344,30 +344,29 @@ typedef struct tagSStatCounter {
 
 void STAvClearAllCounter(PSStatCounter pStatistic);
 
-void STAvUpdateIsrStatCounter(PSStatCounter pStatistic, DWORD dwIsr);
+void STAvUpdateIsrStatCounter(PSStatCounter pStatistic, unsigned long dwIsr);
 
 void STAvUpdateRDStatCounter(PSStatCounter pStatistic,
-                              BYTE byRSR, BYTE byNewRSR, BYTE byRxRate,
-                              PBYTE pbyBuffer, UINT cbFrameLength);
+                              unsigned char byRSR, unsigned char byNewRSR, unsigned char byRxRate,
+                              unsigned char *pbyBuffer, unsigned int cbFrameLength);
 
 void STAvUpdateRDStatCounterEx(PSStatCounter pStatistic,
-                              BYTE byRSR, BYTE byNewRsr, BYTE byRxRate,
-                              PBYTE pbyBuffer, UINT cbFrameLength);
+                              unsigned char byRSR, unsigned char byNewRsr, unsigned char byRxRate,
+                              unsigned char *pbyBuffer, unsigned int cbFrameLength);
 
-void STAvUpdateTDStatCounter(PSStatCounter pStatistic,
-                             BYTE byTSR0, BYTE byTSR1,
-                             PBYTE pbyBuffer, UINT cbFrameLength, UINT uIdx );
+void STAvUpdateTDStatCounter(PSStatCounter pStatistic, unsigned char byTSR0, unsigned char byTSR1,
+		unsigned char *pbyBuffer, unsigned int cbFrameLength, unsigned int uIdx);
 
 void STAvUpdateTDStatCounterEx(
     PSStatCounter   pStatistic,
-    PBYTE           pbyBuffer,
-    DWORD           cbFrameLength
+    unsigned char *pbyBuffer,
+    unsigned long cbFrameLength
     );
 
 void STAvUpdate802_11Counter(
     PSDot11Counters p802_11Counter,
     PSStatCounter   pStatistic,
-    DWORD           dwCounter
+    unsigned long dwCounter
     );
 
 void STAvClear802_11Counter(PSDot11Counters p802_11Counter);
diff --git a/drivers/staging/vt6655/michael.c b/drivers/staging/vt6655/michael.c
index 0bf57efdede..67618f069d0 100644
--- a/drivers/staging/vt6655/michael.c
+++ b/drivers/staging/vt6655/michael.c
@@ -26,8 +26,8 @@
  * Date: Sep 4, 2002
  *
  * Functions:
- *      s_dwGetUINT32 - Convert from BYTE[] to DWORD in a portable way
- *      s_vPutUINT32 - Convert from DWORD to BYTE[] in a portable way
+ *      s_dwGetUINT32 - Convert from unsigned char [] to unsigned long in a portable way
+ *      s_vPutUINT32 - Convert from unsigned long to unsigned char [] in a portable way
  *      s_vClear - Reset the state to the empty message.
  *      s_vSetKey - Set the key.
  *      MIC_vInit - Set the key.
@@ -48,29 +48,29 @@
 
 /*---------------------  Static Functions  --------------------------*/
 /*
-static DWORD s_dwGetUINT32(BYTE * p);         // Get DWORD from 4 bytes LSByte first
-static void s_vPutUINT32(BYTE* p, DWORD val); // Put DWORD into 4 bytes LSByte first
+static unsigned long s_dwGetUINT32(unsigned char *p);         // Get unsigned long from 4 bytes LSByte first
+static void s_vPutUINT32(unsigned char *p, unsigned long val); // Put unsigned long into 4 bytes LSByte first
 */
 static void s_vClear(void);                       // Clear the internal message,
                                               // resets the object to the state just after construction.
-static void s_vSetKey(DWORD dwK0, DWORD dwK1);
-static void s_vAppendByte(BYTE b);            // Add a single byte to the internal message
+static void s_vSetKey(unsigned long dwK0, unsigned long dwK1);
+static void s_vAppendByte(unsigned char b);            // Add a single byte to the internal message
 
 /*---------------------  Export Variables  --------------------------*/
-static DWORD  L, R;           // Current state
+static unsigned long L, R;           // Current state
 
-static DWORD  K0, K1;         // Key
-static DWORD  M;              // Message accumulator (single word)
-static UINT   nBytesInM;      // # bytes in M
+static unsigned long K0, K1;         // Key
+static unsigned long M;              // Message accumulator (single word)
+static unsigned int nBytesInM;      // # bytes in M
 
 /*---------------------  Export Functions  --------------------------*/
 
 /*
-static DWORD s_dwGetUINT32 (BYTE * p)
-// Convert from BYTE[] to DWORD in a portable way
+static unsigned long s_dwGetUINT32 (unsigned char *p)
+// Convert from unsigned char [] to unsigned long in a portable way
 {
-    DWORD res = 0;
-    UINT i;
+    unsigned long res = 0;
+    unsigned int i;
     for(i=0; i<4; i++ )
     {
         res |= (*p++) << (8*i);
@@ -78,13 +78,13 @@ static DWORD s_dwGetUINT32 (BYTE * p)
     return res;
 }
 
-static void s_vPutUINT32 (BYTE* p, DWORD val)
-// Convert from DWORD to BYTE[] in a portable way
+static void s_vPutUINT32 (unsigned char *p, unsigned long val)
+// Convert from unsigned long to unsigned char [] in a portable way
 {
-    UINT i;
+    unsigned int i;
     for(i=0; i<4; i++ )
     {
-        *p++ = (BYTE) (val & 0xff);
+        *p++ = (unsigned char) (val & 0xff);
         val >>= 8;
     }
 }
@@ -99,7 +99,7 @@ static void s_vClear (void)
     M = 0;
 }
 
-static void s_vSetKey (DWORD dwK0, DWORD dwK1)
+static void s_vSetKey (unsigned long dwK0, unsigned long dwK1)
 {
     // Set the key
     K0 = dwK0;
@@ -108,7 +108,7 @@ static void s_vSetKey (DWORD dwK0, DWORD dwK1)
     s_vClear();
 }
 
-static void s_vAppendByte (BYTE b)
+static void s_vAppendByte (unsigned char b)
 {
     // Append the byte to our word-sized buffer
     M |= b << (8*nBytesInM);
@@ -131,7 +131,7 @@ static void s_vAppendByte (BYTE b)
     }
 }
 
-void MIC_vInit (DWORD dwK0, DWORD dwK1)
+void MIC_vInit (unsigned long dwK0, unsigned long dwK1)
 {
     // Set the key
     s_vSetKey(dwK0, dwK1);
@@ -149,7 +149,7 @@ void MIC_vUnInit (void)
     s_vClear();
 }
 
-void MIC_vAppend (PBYTE src, UINT nBytes)
+void MIC_vAppend (unsigned char *src, unsigned int nBytes)
 {
     // This is simple
     while (nBytes > 0)
@@ -159,7 +159,7 @@ void MIC_vAppend (PBYTE src, UINT nBytes)
     }
 }
 
-void MIC_vGetMIC (PDWORD pdwL, PDWORD pdwR)
+void MIC_vGetMIC (unsigned long *pdwL, unsigned long *pdwR)
 {
     // Append the minimum padding
     s_vAppendByte(0x5a);
diff --git a/drivers/staging/vt6655/michael.h b/drivers/staging/vt6655/michael.h
index 97de77b4da2..3131b161d6a 100644
--- a/drivers/staging/vt6655/michael.h
+++ b/drivers/staging/vt6655/michael.h
@@ -35,16 +35,16 @@
 
 /*---------------------  Export Types  ------------------------------*/
 
-void MIC_vInit(DWORD dwK0, DWORD dwK1);
+void MIC_vInit(unsigned long dwK0, unsigned long dwK1);
 
 void MIC_vUnInit(void);
 
 // Append bytes to the message to be MICed
-void MIC_vAppend(PBYTE src, UINT nBytes);
+void MIC_vAppend(unsigned char *src, unsigned int nBytes);
 
 // Get the MIC result. Destination should accept 8 bytes of result.
 // This also resets the message to empty.
-void MIC_vGetMIC(PDWORD pdwL, PDWORD pdwR);
+void MIC_vGetMIC(unsigned long *pdwL, unsigned long *pdwR);
 
 /*---------------------  Export Macros ------------------------------*/
 
diff --git a/drivers/staging/vt6655/power.c b/drivers/staging/vt6655/power.c
index 64c22c3e4bb..7207aca1301 100644
--- a/drivers/staging/vt6655/power.c
+++ b/drivers/staging/vt6655/power.c
@@ -77,12 +77,12 @@ static int          msglevel                =MSG_LEVEL_INFO;
 void
 PSvEnablePowerSaving(
     void *hDeviceContext,
-    WORD wListenInterval
+    unsigned short wListenInterval
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    WORD            wAID = pMgmt->wCurrAID | BIT14 | BIT15;
+    unsigned short wAID = pMgmt->wCurrAID | BIT14 | BIT15;
 
     // set period of power up before TBTT
     VNSvOutPortW(pDevice->PortOffset + MAC_REG_PWBT, C_PWBT);
@@ -115,7 +115,7 @@ PSvEnablePowerSaving(
 
     // enable power saving hw function
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
-    pDevice->bEnablePSMode = TRUE;
+    pDevice->bEnablePSMode = true;
 
     if (pDevice->eOPMode == OP_MODE_ADHOC) {
 //        bMgrPrepareBeaconToSend((void *)pDevice, pMgmt);
@@ -124,7 +124,7 @@ PSvEnablePowerSaving(
     else if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
         PSbSendNullPacket(pDevice);
     }
-    pDevice->bPWBitOn = TRUE;
+    pDevice->bPWBitOn = true;
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "PS:Power Saving Mode Enable... \n");
     return;
 }
@@ -161,12 +161,12 @@ PSvDisablePowerSaving(
     // set always listen beacon
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_ALBCN);
 
-    pDevice->bEnablePSMode = FALSE;
+    pDevice->bEnablePSMode = false;
 
     if (pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) {
         PSbSendNullPacket(pDevice);
     }
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
     return;
 }
 
@@ -177,35 +177,35 @@ PSvDisablePowerSaving(
  * Consider to power down when no more packets to tx or rx.
  *
  * Return Value:
- *    TRUE, if power down success
- *    FALSE, if fail
+ *    true, if power down success
+ *    false, if fail
 -*/
 
 
-BOOL
+bool
 PSbConsiderPowerDown(
     void *hDeviceContext,
-    BOOL bCheckRxDMA,
-    BOOL bCheckCountToWakeUp
+    bool bCheckRxDMA,
+    bool bCheckCountToWakeUp
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            uIdx;
+    unsigned int uIdx;
 
     // check if already in Doze mode
     if (MACbIsRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PS))
-        return TRUE;
+        return true;
 
     if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
         // check if in TIM wake period
         if (pMgmt->bInTIMWake)
-            return FALSE;
+            return false;
     }
 
     // check scan state
     if (pDevice->bCmdRunning)
-        return FALSE;
+        return false;
 
     // Froce PSEN on
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_PSEN);
@@ -213,27 +213,27 @@ PSbConsiderPowerDown(
     // check if all TD are empty,
     for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
         if (pDevice->iTDUsed[uIdx] != 0)
-            return FALSE;
+            return false;
     }
 
     // check if rx isr is clear
     if (bCheckRxDMA &&
         ((pDevice->dwIsr& ISR_RXDMA0) != 0) &&
         ((pDevice->dwIsr & ISR_RXDMA1) != 0)){
-        return FALSE;
+        return false;
     };
 
     if (pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
         if (bCheckCountToWakeUp &&
            (pMgmt->wCountToWakeUp == 0 || pMgmt->wCountToWakeUp == 1)) {
-             return FALSE;
+             return false;
         }
     }
 
     // no Tx, no Rx isr, now go to Doze
     MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_GO2DOZE);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Go to Doze ZZZZZZZZZZZZZZZ\n");
-    return TRUE;
+    return true;
 }
 
 
@@ -262,7 +262,7 @@ PSvSendPSPOLL(
 
     memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_HDR_ADDR2_LEN);
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     pTxPacket->p80211Header->sA2.wFrameCtl = cpu_to_le16(
          (
          WLAN_SET_FC_FTYPE(WLAN_TYPE_CTL) |
@@ -296,7 +296,7 @@ PSvSendPSPOLL(
  *    None.
  *
 -*/
-BOOL
+bool
 PSbSendNullPacket(
     void *hDeviceContext
     )
@@ -304,32 +304,32 @@ PSbSendNullPacket(
     PSDevice            pDevice = (PSDevice)hDeviceContext;
     PSTxMgmtPacket      pTxPacket = NULL;
     PSMgmtObject        pMgmt = pDevice->pMgmt;
-    UINT                uIdx;
+    unsigned int uIdx;
 
 
-    if (pDevice->bLinkPass == FALSE) {
-        return FALSE;
+    if (pDevice->bLinkPass == false) {
+        return false;
     }
     #ifdef TxInSleep
-     if ((pDevice->bEnablePSMode == FALSE) &&
-	  (pDevice->fTxDataInSleep == FALSE)){
-        return FALSE;
+     if ((pDevice->bEnablePSMode == false) &&
+	  (pDevice->fTxDataInSleep == false)){
+        return false;
     }
 #else
-    if (pDevice->bEnablePSMode == FALSE) {
-        return FALSE;
+    if (pDevice->bEnablePSMode == false) {
+        return false;
     }
 #endif
     if (pDevice->bEnablePSMode) {
         for (uIdx = 0; uIdx < TYPE_MAXTD; uIdx ++) {
             if (pDevice->iTDUsed[uIdx] != 0)
-                return FALSE;
+                return false;
         }
     }
 
     memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN);
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
 
     if (pDevice->bEnablePSMode) {
 
@@ -350,7 +350,7 @@ PSbSendNullPacket(
     }
 
     if(pMgmt->eCurrMode != WMAC_MODE_IBSS_STA) {
-        pTxPacket->p80211Header->sA3.wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_TODS(1));
+        pTxPacket->p80211Header->sA3.wFrameCtl |= cpu_to_le16((unsigned short)WLAN_SET_FC_TODS(1));
     }
 
     memcpy(pTxPacket->p80211Header->sA3.abyAddr1, pMgmt->abyCurrBSSID, WLAN_ADDR_LEN);
@@ -361,7 +361,7 @@ PSbSendNullPacket(
     // send the frame
     if (csMgmt_xmit(pDevice, pTxPacket) != CMD_STATUS_PENDING) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Send Null Packet failed !\n");
-        return FALSE;
+        return false;
     }
     else {
 
@@ -369,7 +369,7 @@ PSbSendNullPacket(
     }
 
 
-    return TRUE ;
+    return true ;
 }
 
 /*+
@@ -382,7 +382,7 @@ PSbSendNullPacket(
  *
 -*/
 
-BOOL
+bool
 PSbIsNextTBTTWakeUp(
     void *hDeviceContext
     )
@@ -390,7 +390,7 @@ PSbIsNextTBTTWakeUp(
 
     PSDevice         pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject        pMgmt = pDevice->pMgmt;
-    BOOL                bWakeUp = FALSE;
+    bool bWakeUp = false;
 
     if (pMgmt->wListenInterval >= 2) {
         if (pMgmt->wCountToWakeUp == 0) {
@@ -402,7 +402,7 @@ PSbIsNextTBTTWakeUp(
         if (pMgmt->wCountToWakeUp == 1) {
             // Turn on wake up to listen next beacon
             MACvRegBitsOn(pDevice->PortOffset, MAC_REG_PSCTL, PSCTL_LNBCN);
-            bWakeUp = TRUE;
+            bWakeUp = true;
         }
 
     }
diff --git a/drivers/staging/vt6655/power.h b/drivers/staging/vt6655/power.h
index c0dbe216e97..01013b59228 100644
--- a/drivers/staging/vt6655/power.h
+++ b/drivers/staging/vt6655/power.h
@@ -48,11 +48,11 @@
 // PSDevice pDevice
 // PSDevice hDeviceContext
 
-BOOL
+bool
 PSbConsiderPowerDown(
     void *hDeviceContext,
-    BOOL bCheckRxDMA,
-    BOOL bCheckCountToWakeUp
+    bool bCheckRxDMA,
+    bool bCheckCountToWakeUp
     );
 
 void
@@ -63,7 +63,7 @@ PSvDisablePowerSaving(
 void
 PSvEnablePowerSaving(
     void *hDeviceContext,
-    WORD wListenInterval
+    unsigned short wListenInterval
     );
 
 void
@@ -71,12 +71,12 @@ PSvSendPSPOLL(
     void *hDeviceContext
     );
 
-BOOL
+bool
 PSbSendNullPacket(
     void *hDeviceContext
     );
 
-BOOL
+bool
 PSbIsNextTBTTWakeUp(
     void *hDeviceContext
     );
diff --git a/drivers/staging/vt6655/rc4.c b/drivers/staging/vt6655/rc4.c
index 4a53f159cb3..9856c08b3d7 100644
--- a/drivers/staging/vt6655/rc4.c
+++ b/drivers/staging/vt6655/rc4.c
@@ -32,38 +32,38 @@
 
 #include "rc4.h"
 
-void rc4_init(PRC4Ext pRC4, PBYTE pbyKey, UINT cbKey_len)
+void rc4_init(PRC4Ext pRC4, unsigned char *pbyKey, unsigned int cbKey_len)
 {
-    UINT  ust1, ust2;
-    UINT  keyindex;
-    UINT  stateindex;
-    PBYTE pbyst;
-    UINT  idx;
+    unsigned int ust1, ust2;
+    unsigned int keyindex;
+    unsigned int stateindex;
+    unsigned char *pbyst;
+    unsigned int idx;
 
     pbyst = pRC4->abystate;
     pRC4->ux = 0;
     pRC4->uy = 0;
     for (idx = 0; idx < 256; idx++)
-        pbyst[idx] = (BYTE)idx;
+        pbyst[idx] = (unsigned char)idx;
     keyindex = 0;
     stateindex = 0;
     for (idx = 0; idx < 256; idx++) {
         ust1 = pbyst[idx];
         stateindex = (stateindex + pbyKey[keyindex] + ust1) & 0xff;
         ust2 = pbyst[stateindex];
-        pbyst[stateindex] = (BYTE)ust1;
-        pbyst[idx] = (BYTE)ust2;
+        pbyst[stateindex] = (unsigned char)ust1;
+        pbyst[idx] = (unsigned char)ust2;
         if (++keyindex >= cbKey_len)
             keyindex = 0;
     }
 }
 
-UINT rc4_byte(PRC4Ext pRC4)
+unsigned int rc4_byte(PRC4Ext pRC4)
 {
-    UINT ux;
-    UINT uy;
-    UINT ustx, usty;
-    PBYTE pbyst;
+    unsigned int ux;
+    unsigned int uy;
+    unsigned int ustx, usty;
+    unsigned char *pbyst;
 
     pbyst = pRC4->abystate;
     ux = (pRC4->ux + 1) & 0xff;
@@ -72,16 +72,16 @@ UINT rc4_byte(PRC4Ext pRC4)
     usty = pbyst[uy];
     pRC4->ux = ux;
     pRC4->uy = uy;
-    pbyst[uy] = (BYTE)ustx;
-    pbyst[ux] = (BYTE)usty;
+    pbyst[uy] = (unsigned char)ustx;
+    pbyst[ux] = (unsigned char)usty;
 
     return pbyst[(ustx + usty) & 0xff];
 }
 
-void rc4_encrypt(PRC4Ext pRC4, PBYTE pbyDest,
-                     PBYTE pbySrc, UINT cbData_len)
+void rc4_encrypt(PRC4Ext pRC4, unsigned char *pbyDest,
+                     unsigned char *pbySrc, unsigned int cbData_len)
 {
-    UINT ii;
+    unsigned int ii;
     for (ii = 0; ii < cbData_len; ii++)
-        pbyDest[ii] = (BYTE)(pbySrc[ii] ^ rc4_byte(pRC4));
+        pbyDest[ii] = (unsigned char)(pbySrc[ii] ^ rc4_byte(pRC4));
 }
diff --git a/drivers/staging/vt6655/rc4.h b/drivers/staging/vt6655/rc4.h
index e65cae69efa..ad04e351365 100644
--- a/drivers/staging/vt6655/rc4.h
+++ b/drivers/staging/vt6655/rc4.h
@@ -35,13 +35,13 @@
 /*---------------------  Export Definitions -------------------------*/
 /*---------------------  Export Types  ------------------------------*/
 typedef struct {
-    UINT ux;
-    UINT uy;
-    BYTE abystate[256];
+    unsigned int ux;
+    unsigned int uy;
+    unsigned char abystate[256];
 } RC4Ext, *PRC4Ext;
 
-void rc4_init(PRC4Ext pRC4, PBYTE pbyKey, UINT cbKey_len);
-UINT rc4_byte(PRC4Ext pRC4);
-void rc4_encrypt(PRC4Ext pRC4, PBYTE pbyDest, PBYTE pbySrc, UINT cbData_len);
+void rc4_init(PRC4Ext pRC4, unsigned char *pbyKey, unsigned int cbKey_len);
+unsigned int rc4_byte(PRC4Ext pRC4);
+void rc4_encrypt(PRC4Ext pRC4, unsigned char *pbyDest, unsigned char *pbySrc, unsigned int cbData_len);
 
 #endif //__RC4_H__
diff --git a/drivers/staging/vt6655/rf.c b/drivers/staging/vt6655/rf.c
index 7cb86fe2eeb..b8ec783e55e 100644
--- a/drivers/staging/vt6655/rf.c
+++ b/drivers/staging/vt6655/rf.c
@@ -94,7 +94,7 @@
 
 
 
-const DWORD dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
+const unsigned long dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
     0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
     0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
     0x01A00200+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, //
@@ -112,7 +112,7 @@ const DWORD dwAL2230InitTable[CB_AL2230_INIT_SEQ] = {
     0x00580F00+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW
     };
 
-const DWORD dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
+const unsigned long dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
     0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
     0x03F79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
     0x03E79000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
@@ -129,7 +129,7 @@ const DWORD dwAL2230ChannelTable0[CB_MAX_CHANNEL] = {
     0x03E7C000+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
     };
 
-const DWORD dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
+const unsigned long dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
     0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 1, Tf = 2412MHz
     0x0B333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 2, Tf = 2417MHz
     0x03333100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW, // channel = 3, Tf = 2422MHz
@@ -146,7 +146,7 @@ const DWORD dwAL2230ChannelTable1[CB_MAX_CHANNEL] = {
     0x06666100+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 14, Tf = 2412M
     };
 
-DWORD dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
+unsigned long dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
     0x04040900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
     0x04041900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
     0x04042900+(BY_AL2230_REG_LEN<<3)+IFREGCTL_REGW,
@@ -216,7 +216,7 @@ DWORD dwAL2230PowerTable[AL2230_PWR_IDX_LEN] = {
 //{{ RobertYu:20050104
 // 40MHz reference frequency
 // Need to Pull PLLON(PE3) low when writing channel registers through 3-wire.
-const DWORD dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
+const unsigned long dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
     0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
     0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel1 // Need modify for 11a
     0x841FF200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11a: 451FE2
@@ -239,7 +239,7 @@ const DWORD dwAL7230InitTable[CB_AL7230_INIT_SEQ] = {
     0x1ABA8F00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // Need modify for 11a: 12BACF
     };
 
-const DWORD dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
+const unsigned long dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
     0x0FF52000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
     0x00000100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Channel184 // Need modify for 11b/g
     0x451FE200+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // Need modify for 11b/g
@@ -259,7 +259,7 @@ const DWORD dwAL7230InitTableAMode[CB_AL7230_INIT_SEQ] = {
     };
 
 
-const DWORD dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
+const unsigned long dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
     0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
     0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
     0x00379000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -325,7 +325,7 @@ const DWORD dwAL7230ChannelTable0[CB_MAX_CHANNEL] = {
     0x0FF61000+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
     };
 
-const DWORD dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
+const unsigned long dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
     0x13333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
     0x1B333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
     0x03333100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -389,7 +389,7 @@ const DWORD dwAL7230ChannelTable1[CB_MAX_CHANNEL] = {
     0x02AAA100+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW  // channel = 165, Tf = 5825MHz (56)
     };
 
-const DWORD dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
+const unsigned long dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
     0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  1, Tf = 2412MHz
     0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  2, Tf = 2417MHz
     0x7FD78400+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW, // channel =  3, Tf = 2422MHz
@@ -471,15 +471,15 @@ const DWORD dwAL7230ChannelTable2[CB_MAX_CHANNEL] = {
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL s_bAL7230Init (DWORD_PTR dwIoBase)
+bool s_bAL7230Init (unsigned long dwIoBase)
 {
     int     ii;
-    BOOL    bResult;
+    bool bResult;
 
-    bResult = TRUE;
+    bResult = true;
 
     //3-wire control for normal mode
     VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
@@ -517,11 +517,11 @@ BOOL s_bAL7230Init (DWORD_PTR dwIoBase)
 }
 
 // Need to Pull PLLON low when writing channel registers through 3-wire interface
-BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
+bool s_bAL7230SelectChannel (unsigned long dwIoBase, unsigned char byChannel)
 {
-    BOOL    bResult;
+    bool bResult;
 
-    bResult = TRUE;
+    bResult = true;
 
     // PLLON Off
     MACvWordRegBitsOff(dwIoBase, MAC_REG_SOFTPWRCTL, SOFTPWRCTL_SWPE3);
@@ -552,7 +552,7 @@ BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -567,7 +567,7 @@ BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -585,7 +585,7 @@ BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -599,7 +599,7 @@ BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -619,13 +619,13 @@ BOOL s_bAL7230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
+bool IFRFbWriteEmbeded (unsigned long dwIoBase, unsigned long dwData)
 {
-    WORD    ww;
-    DWORD   dwValue;
+    unsigned short ww;
+    unsigned long dwValue;
 
     VNSvOutPortD(dwIoBase + MAC_REG_IFREGCTL, dwData);
 
@@ -638,9 +638,9 @@ BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
 
     if (ww == W_MAX_TIMEOUT) {
 //        DBG_PORT80_ALWAYS(0x32);
-        return FALSE;
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
 
@@ -654,7 +654,7 @@ BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -668,7 +668,7 @@ BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -681,15 +681,15 @@ BOOL IFRFbWriteEmbeded (DWORD_PTR dwIoBase, DWORD dwData)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL RFbAL2230Init (DWORD_PTR dwIoBase)
+bool RFbAL2230Init (unsigned long dwIoBase)
 {
     int     ii;
-    BOOL    bResult;
+    bool bResult;
 
-    bResult = TRUE;
+    bResult = true;
 
     //3-wire control for normal mode
     VNSvOutPortB(dwIoBase + MAC_REG_SOFTPWRCTL, 0);
@@ -734,11 +734,11 @@ MACvTimer0MicroSDelay(dwIoBase, 30); //delay 30 us
     return bResult;
 }
 
-BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
+bool RFbAL2230SelectChannel (unsigned long dwIoBase, unsigned char byChannel)
 {
-    BOOL    bResult;
+    bool bResult;
 
-    bResult = TRUE;
+    bResult = true;
 
     bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL2230ChannelTable0[byChannel-1]);
     bResult &= IFRFbWriteEmbeded (dwIoBase, dwAL2230ChannelTable1[byChannel-1]);
@@ -761,7 +761,7 @@ BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -776,7 +776,7 @@ BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -790,7 +790,7 @@ BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
@@ -804,14 +804,14 @@ BOOL RFbAL2230SelectChannel (DWORD_PTR dwIoBase, BYTE byChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL RFbInit (
+bool RFbInit (
     PSDevice  pDevice
     )
 {
-BOOL    bResult = TRUE;
+bool bResult = true;
     switch (pDevice->byRFType) {
         case RF_AIROHA :
         case RF_AL2230S:
@@ -823,10 +823,10 @@ BOOL    bResult = TRUE;
             bResult = s_bAL7230Init(pDevice->PortOffset);
             break;
         case RF_NOTHING :
-            bResult = TRUE;
+            bResult = true;
             break;
         default :
-            bResult = FALSE;
+            bResult = false;
             break;
     }
     return bResult;
@@ -842,21 +842,21 @@ BOOL    bResult = TRUE;
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL RFbShutDown (
+bool RFbShutDown (
     PSDevice  pDevice
     )
 {
-BOOL    bResult = TRUE;
+bool bResult = true;
 
     switch (pDevice->byRFType) {
         case RF_AIROHA7230 :
             bResult = IFRFbWriteEmbeded (pDevice->PortOffset, 0x1ABAEF00+(BY_AL7230_REG_LEN<<3)+IFREGCTL_REGW);
             break;
         default :
-            bResult = TRUE;
+            bResult = true;
             break;
     }
     return bResult;
@@ -872,12 +872,12 @@ BOOL    bResult = TRUE;
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL RFbSelectChannel (DWORD_PTR dwIoBase, BYTE byRFType, BYTE byChannel)
+bool RFbSelectChannel (unsigned long dwIoBase, unsigned char byRFType, unsigned char byChannel)
 {
-BOOL    bResult = TRUE;
+bool bResult = true;
     switch (byRFType) {
 
         case RF_AIROHA :
@@ -890,10 +890,10 @@ BOOL    bResult = TRUE;
             break;
         //}} RobertYu
         case RF_NOTHING :
-            bResult = TRUE;
+            bResult = true;
             break;
         default:
-            bResult = FALSE;
+            bResult = false;
             break;
     }
     return bResult;
@@ -911,11 +911,11 @@ BOOL    bResult = TRUE;
  * Return Value: None.
  *
  */
-BOOL RFvWriteWakeProgSyn (DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel)
+bool RFvWriteWakeProgSyn (unsigned long dwIoBase, unsigned char byRFType, unsigned int uChannel)
 {
     int   ii;
-    BYTE  byInitCount = 0;
-    BYTE  bySleepCount = 0;
+    unsigned char byInitCount = 0;
+    unsigned char bySleepCount = 0;
 
     VNSvOutPortW(dwIoBase + MAC_REG_MISCFFNDEX, 0);
     switch (byRFType) {
@@ -923,20 +923,20 @@ BOOL RFvWriteWakeProgSyn (DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel)
         case RF_AL2230S:
 
             if (uChannel > CB_MAX_CHANNEL_24G)
-                return FALSE;
+                return false;
 
             byInitCount = CB_AL2230_INIT_SEQ + 2; // Init Reg + Channel Reg (2)
             bySleepCount = 0;
             if (byInitCount > (MISCFIFO_SYNDATASIZE - bySleepCount)) {
-                return FALSE;
+                return false;
             }
 
             for (ii = 0; ii < CB_AL2230_INIT_SEQ; ii++ ) {
-                MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230InitTable[ii]);
+                MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230InitTable[ii]);
             }
-            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable0[uChannel-1]);
+            MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable0[uChannel-1]);
             ii ++;
-            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable1[uChannel-1]);
+            MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL2230ChannelTable1[uChannel-1]);
             break;
 
         //{{ RobertYu: 20050104
@@ -945,42 +945,42 @@ BOOL RFvWriteWakeProgSyn (DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel)
             byInitCount = CB_AL7230_INIT_SEQ + 3; // Init Reg + Channel Reg (3)
             bySleepCount = 0;
             if (byInitCount > (MISCFIFO_SYNDATASIZE - bySleepCount)) {
-                return FALSE;
+                return false;
             }
 
             if (uChannel <= CB_MAX_CHANNEL_24G)
             {
                 for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++ ) {
-                    MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTable[ii]);
+                    MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTable[ii]);
                 }
             }
             else
             {
                 for (ii = 0; ii < CB_AL7230_INIT_SEQ; ii++ ) {
-                    MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTableAMode[ii]);
+                    MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230InitTableAMode[ii]);
                 }
             }
 
-            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable0[uChannel-1]);
+            MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable0[uChannel-1]);
             ii ++;
-            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable1[uChannel-1]);
+            MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable1[uChannel-1]);
             ii ++;
-            MACvSetMISCFifo(dwIoBase, (WORD)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable2[uChannel-1]);
+            MACvSetMISCFifo(dwIoBase, (unsigned short)(MISCFIFO_SYNDATA_IDX + ii), dwAL7230ChannelTable2[uChannel-1]);
             break;
         //}} RobertYu
 
         case RF_NOTHING :
-            return TRUE;
+            return true;
             break;
 
         default:
-            return FALSE;
+            return false;
             break;
     }
 
-    MACvSetMISCFifo(dwIoBase, MISCFIFO_SYNINFO_IDX, (DWORD)MAKEWORD(bySleepCount, byInitCount));
+    MACvSetMISCFifo(dwIoBase, MISCFIFO_SYNINFO_IDX, (unsigned long )MAKEWORD(bySleepCount, byInitCount));
 
-    return TRUE;
+    return true;
 }
 
 /*
@@ -993,25 +993,25 @@ BOOL RFvWriteWakeProgSyn (DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL RFbSetPower (
+bool RFbSetPower (
     PSDevice  pDevice,
-    UINT      uRATE,
-    UINT      uCH
+    unsigned int uRATE,
+    unsigned int uCH
     )
 {
-BOOL    bResult = TRUE;
-BYTE    byPwr = 0;
-BYTE    byDec = 0;
-BYTE    byPwrdBm = 0;
+bool bResult = true;
+unsigned char byPwr = 0;
+unsigned char byDec = 0;
+unsigned char byPwrdBm = 0;
 
     if (pDevice->dwDiagRefCount != 0) {
-        return TRUE;
+        return true;
     }
     if ((uCH < 1) || (uCH > CB_MAX_CHANNEL)) {
-        return FALSE;
+        return false;
     }
 
     switch (uRATE) {
@@ -1070,7 +1070,7 @@ BYTE    byPwrdBm = 0;
 #if 0
 
     // 802.11h TPC
-    if (pDevice->bLinkPass == TRUE) {
+    if (pDevice->bLinkPass == true) {
         // do not over local constraint
         if (byPwrdBm > pDevice->abyLocalPwr[uCH]) {
             pDevice->byCurPwrdBm = pDevice->abyLocalPwr[uCH];
@@ -1111,11 +1111,11 @@ BYTE    byPwrdBm = 0;
 
 //    if (pDevice->byLocalID <= REV_ID_VT3253_B1) {
     if (pDevice->byCurPwr == byPwr) {
-        return TRUE;
+        return true;
     }
     bResult = RFbRawSetPower(pDevice, byPwr, uRATE);
 //    }
-    if (bResult == TRUE) {
+    if (bResult == true) {
        pDevice->byCurPwr = byPwr;
     }
     return bResult;
@@ -1131,21 +1131,21 @@ BYTE    byPwrdBm = 0;
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
 
-BOOL RFbRawSetPower (
+bool RFbRawSetPower (
     PSDevice  pDevice,
-    BYTE      byPwr,
-    UINT      uRATE
+    unsigned char byPwr,
+    unsigned int uRATE
     )
 {
-BOOL    bResult = TRUE;
-DWORD   dwMax7230Pwr = 0;
+bool bResult = true;
+unsigned long dwMax7230Pwr = 0;
 
     if (byPwr >=  pDevice->byMaxPwrLevel) {
-        return (FALSE);
+        return (false);
     }
     switch (pDevice->byRFType) {
 
@@ -1204,14 +1204,14 @@ DWORD   dwMax7230Pwr = 0;
 void
 RFvRSSITodBm (
     PSDevice pDevice,
-    BYTE     byCurrRSSI,
+    unsigned char byCurrRSSI,
     long *    pldBm
     )
 {
-    BYTE byIdx = (((byCurrRSSI & 0xC0) >> 6) & 0x03);
-    LONG b = (byCurrRSSI & 0x3F);
-    LONG a = 0;
-    BYTE abyAIROHARF[4] = {0, 18, 0, 40};
+    unsigned char byIdx = (((byCurrRSSI & 0xC0) >> 6) & 0x03);
+    long b = (byCurrRSSI & 0x3F);
+    long a = 0;
+    unsigned char abyAIROHARF[4] = {0, 18, 0, 40};
 
     switch (pDevice->byRFType) {
         case RF_AIROHA:
@@ -1232,11 +1232,11 @@ RFvRSSITodBm (
 
 // Post processing for the 11b/g and 11a.
 // for save time on changing Reg2,3,5,7,10,12,15
-BOOL RFbAL7230SelectChannelPostProcess (DWORD_PTR dwIoBase, BYTE byOldChannel, BYTE byNewChannel)
+bool RFbAL7230SelectChannelPostProcess (unsigned long dwIoBase, unsigned char byOldChannel, unsigned char byNewChannel)
 {
-    BOOL    bResult;
+    bool bResult;
 
-    bResult = TRUE;
+    bResult = true;
 
     // if change between 11 b/g and 11a need to update the following register
     // Channel Index 1~14
diff --git a/drivers/staging/vt6655/rf.h b/drivers/staging/vt6655/rf.h
index 25dfc7942f6..1f8d82e1304 100644
--- a/drivers/staging/vt6655/rf.h
+++ b/drivers/staging/vt6655/rf.h
@@ -76,28 +76,28 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL IFRFbWriteEmbeded(DWORD_PTR dwIoBase, DWORD dwData);
-BOOL RFbSelectChannel(DWORD_PTR dwIoBase, BYTE byRFType, BYTE byChannel);
-BOOL RFbInit (
+bool IFRFbWriteEmbeded(unsigned long dwIoBase, unsigned long dwData);
+bool RFbSelectChannel(unsigned long dwIoBase, unsigned char byRFType, unsigned char byChannel);
+bool RFbInit (
     PSDevice  pDevice
     );
-BOOL RFvWriteWakeProgSyn(DWORD_PTR dwIoBase, BYTE byRFType, UINT uChannel);
-BOOL RFbSetPower(PSDevice pDevice, UINT uRATE, UINT uCH);
-BOOL RFbRawSetPower(
+bool RFvWriteWakeProgSyn(unsigned long dwIoBase, unsigned char byRFType, unsigned int uChannel);
+bool RFbSetPower(PSDevice pDevice, unsigned int uRATE, unsigned int uCH);
+bool RFbRawSetPower(
     PSDevice  pDevice,
-    BYTE      byPwr,
-    UINT      uRATE
+    unsigned char byPwr,
+    unsigned int uRATE
     );
 
 void
 RFvRSSITodBm(
     PSDevice pDevice,
-    BYTE     byCurrRSSI,
+    unsigned char byCurrRSSI,
     long    *pldBm
     );
 
 //{{ RobertYu: 20050104
-BOOL RFbAL7230SelectChannelPostProcess(DWORD_PTR dwIoBase, BYTE byOldChannel, BYTE byNewChannel);
+bool RFbAL7230SelectChannelPostProcess(unsigned long dwIoBase, unsigned char byOldChannel, unsigned char byNewChannel);
 //}} RobertYu
 
 #endif // __RF_H__
diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c
index a0445c3427e..c920cf69405 100644
--- a/drivers/staging/vt6655/rxtx.c
+++ b/drivers/staging/vt6655/rxtx.c
@@ -80,16 +80,16 @@ static int          msglevel                =MSG_LEVEL_INFO;
 #define CRITICAL_PACKET_LEN      256    // if packet size < 256 -> in-direct send
                                         //    packet size >= 256 -> direct send
 
-const WORD wTimeStampOff[2][MAX_RATE] = {
+const unsigned short wTimeStampOff[2][MAX_RATE] = {
         {384, 288, 226, 209, 54, 43, 37, 31, 28, 25, 24, 23}, // Long Preamble
         {384, 192, 130, 113, 54, 43, 37, 31, 28, 25, 24, 23}, // Short Preamble
     };
 
-const WORD wFB_Opt0[2][5] = {
+const unsigned short wFB_Opt0[2][5] = {
         {RATE_12M, RATE_18M, RATE_24M, RATE_36M, RATE_48M}, // fallback_rate0
         {RATE_12M, RATE_12M, RATE_18M, RATE_24M, RATE_36M}, // fallback_rate1
     };
-const WORD wFB_Opt1[2][5] = {
+const unsigned short wFB_Opt1[2][5] = {
         {RATE_12M, RATE_18M, RATE_24M, RATE_24M, RATE_36M}, // fallback_rate0
         {RATE_6M , RATE_6M,  RATE_12M, RATE_12M, RATE_18M}, // fallback_rate1
     };
@@ -118,12 +118,12 @@ static
 void
 s_vFillTxKey(
     PSDevice   pDevice,
-    PBYTE      pbyBuf,
-    PBYTE      pbyIVHead,
+    unsigned char *pbyBuf,
+    unsigned char *pbyIVHead,
     PSKeyItem  pTransmitKey,
-    PBYTE      pbyHdrBuf,
-    WORD       wPayloadLen,
-    PBYTE      pMICHDR
+    unsigned char *pbyHdrBuf,
+    unsigned short wPayloadLen,
+    unsigned char *pMICHDR
     );
 
 
@@ -132,76 +132,65 @@ static
 void
 s_vFillRTSHead(
     PSDevice         pDevice,
-    BYTE             byPktType,
+    unsigned char byPktType,
     void *           pvRTS,
-    UINT             cbFrameLength,
-    BOOL             bNeedAck,
-    BOOL             bDisCRC,
+    unsigned int	cbFrameLength,
+    bool bNeedAck,
+    bool bDisCRC,
     PSEthernetHeader psEthHeader,
-    WORD             wCurrentRate,
-    BYTE             byFBOption
+    unsigned short wCurrentRate,
+    unsigned char byFBOption
     );
 
 static
 void
 s_vGenerateTxParameter(
     PSDevice         pDevice,
-    BYTE            byPktType,
+    unsigned char byPktType,
     void *           pTxBufHead,
     void *           pvRrvTime,
     void *           pvRTS,
     void *           pvCTS,
-    UINT             cbFrameSize,
-    BOOL             bNeedACK,
-    UINT             uDMAIdx,
+    unsigned int	cbFrameSize,
+    bool bNeedACK,
+    unsigned int	uDMAIdx,
     PSEthernetHeader psEthHeader,
-    WORD             wCurrentRate
+    unsigned short wCurrentRate
     );
 
 
 
 static void s_vFillFragParameter(
     PSDevice pDevice,
-    PBYTE    pbyBuffer,
-    UINT     uTxType,
+    unsigned char *pbyBuffer,
+    unsigned int	uTxType,
     void *   pvtdCurr,
-    WORD     wFragType,
-    UINT     cbReqCount
+    unsigned short wFragType,
+    unsigned int	cbReqCount
     );
 
 
-static
-UINT
-s_cbFillTxBufHead (
-    PSDevice         pDevice,
-    BYTE             byPktType,
-    PBYTE            pbyTxBufferAddr,
-    UINT             cbFrameBodySize,
-    UINT             uDMAIdx,
-    PSTxDesc         pHeadTD,
-    PSEthernetHeader psEthHeader,
-    PBYTE            pPacket,
-    BOOL             bNeedEncrypt,
-    PSKeyItem        pTransmitKey,
-    UINT             uNodeIndex,
-    PUINT            puMACfragNum
-    );
+static unsigned int
+s_cbFillTxBufHead(PSDevice pDevice, unsigned char byPktType, unsigned char *pbyTxBufferAddr,
+	unsigned int cbFrameBodySize, unsigned int uDMAIdx, PSTxDesc pHeadTD,
+	PSEthernetHeader psEthHeader, unsigned char *pPacket, bool bNeedEncrypt,
+	PSKeyItem pTransmitKey, unsigned int uNodeIndex, unsigned int *puMACfragNum);
 
 
 static
-UINT
+unsigned int
 s_uFillDataHead (
     PSDevice pDevice,
-    BYTE     byPktType,
+    unsigned char byPktType,
     void *   pTxDataHead,
-    UINT     cbFrameLength,
-    UINT     uDMAIdx,
-    BOOL     bNeedAck,
-    UINT     uFragIdx,
-    UINT     cbLastFragmentSize,
-    UINT     uMACfragNum,
-    BYTE     byFBOption,
-    WORD     wCurrentRate
+    unsigned int cbFrameLength,
+    unsigned int uDMAIdx,
+    bool bNeedAck,
+    unsigned int uFragIdx,
+    unsigned int cbLastFragmentSize,
+    unsigned int uMACfragNum,
+    unsigned char byFBOption,
+    unsigned short wCurrentRate
     );
 
 
@@ -213,20 +202,20 @@ static
 void
 s_vFillTxKey (
     PSDevice   pDevice,
-    PBYTE      pbyBuf,
-    PBYTE      pbyIVHead,
+    unsigned char *pbyBuf,
+    unsigned char *pbyIVHead,
     PSKeyItem  pTransmitKey,
-    PBYTE      pbyHdrBuf,
-    WORD       wPayloadLen,
-    PBYTE      pMICHDR
+    unsigned char *pbyHdrBuf,
+    unsigned short wPayloadLen,
+    unsigned char *pMICHDR
     )
 {
-    PDWORD          pdwIV = (PDWORD) pbyIVHead;
-    PDWORD          pdwExtIV = (PDWORD) ((PBYTE)pbyIVHead+4);
-    WORD            wValue;
+    unsigned long *pdwIV = (unsigned long *) pbyIVHead;
+    unsigned long *pdwExtIV = (unsigned long *) ((unsigned char *)pbyIVHead+4);
+    unsigned short wValue;
     PS802_11Header  pMACHeader = (PS802_11Header)pbyHdrBuf;
-    DWORD           dwRevIVCounter;
-    BYTE            byKeyIndex = 0;
+    unsigned long dwRevIVCounter;
+    unsigned char byKeyIndex = 0;
 
 
 
@@ -240,13 +229,13 @@ s_vFillTxKey (
 
     if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
         if (pTransmitKey->uKeyLength == WLAN_WEP232_KEYLEN ){
-            memcpy(pDevice->abyPRNG, (PBYTE)&(dwRevIVCounter), 3);
+            memcpy(pDevice->abyPRNG, (unsigned char *)&(dwRevIVCounter), 3);
             memcpy(pDevice->abyPRNG+3, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
         } else {
-            memcpy(pbyBuf, (PBYTE)&(dwRevIVCounter), 3);
+            memcpy(pbyBuf, (unsigned char *)&(dwRevIVCounter), 3);
             memcpy(pbyBuf+3, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
             if(pTransmitKey->uKeyLength == WLAN_WEP40_KEYLEN) {
-                memcpy(pbyBuf+8, (PBYTE)&(dwRevIVCounter), 3);
+                memcpy(pbyBuf+8, (unsigned char *)&(dwRevIVCounter), 3);
                 memcpy(pbyBuf+11, pTransmitKey->abyKey, pTransmitKey->uKeyLength);
             }
             memcpy(pDevice->abyPRNG, pbyBuf, 16);
@@ -270,7 +259,7 @@ s_vFillTxKey (
         // Make IV
         memcpy(pdwIV, pDevice->abyPRNG, 3);
 
-        *(pbyIVHead+3) = (BYTE)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
+        *(pbyIVHead+3) = (unsigned char)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
         // Append IV&ExtIV after Mac Header
         *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFillTxKey()---- pdwExtIV: %lx\n", *pdwExtIV);
@@ -284,33 +273,33 @@ s_vFillTxKey (
 
         // Make IV
         *pdwIV = 0;
-        *(pbyIVHead+3) = (BYTE)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
-        *pdwIV |= cpu_to_le16((WORD)(pTransmitKey->wTSC15_0));
+        *(pbyIVHead+3) = (unsigned char)(((byKeyIndex << 6) & 0xc0) | 0x20); // 0x20 is ExtIV
+        *pdwIV |= cpu_to_le16((unsigned short)(pTransmitKey->wTSC15_0));
         //Append IV&ExtIV after Mac Header
         *pdwExtIV = cpu_to_le32(pTransmitKey->dwTSC47_16);
 
         //Fill MICHDR0
         *pMICHDR = 0x59;
-        *((PBYTE)(pMICHDR+1)) = 0; // TxPriority
+        *((unsigned char *)(pMICHDR+1)) = 0; // TxPriority
         memcpy(pMICHDR+2, &(pMACHeader->abyAddr2[0]), 6);
-        *((PBYTE)(pMICHDR+8)) = HIBYTE(HIWORD(pTransmitKey->dwTSC47_16));
-        *((PBYTE)(pMICHDR+9)) = LOBYTE(HIWORD(pTransmitKey->dwTSC47_16));
-        *((PBYTE)(pMICHDR+10)) = HIBYTE(LOWORD(pTransmitKey->dwTSC47_16));
-        *((PBYTE)(pMICHDR+11)) = LOBYTE(LOWORD(pTransmitKey->dwTSC47_16));
-        *((PBYTE)(pMICHDR+12)) = HIBYTE(pTransmitKey->wTSC15_0);
-        *((PBYTE)(pMICHDR+13)) = LOBYTE(pTransmitKey->wTSC15_0);
-        *((PBYTE)(pMICHDR+14)) = HIBYTE(wPayloadLen);
-        *((PBYTE)(pMICHDR+15)) = LOBYTE(wPayloadLen);
+        *((unsigned char *)(pMICHDR+8)) = HIBYTE(HIWORD(pTransmitKey->dwTSC47_16));
+        *((unsigned char *)(pMICHDR+9)) = LOBYTE(HIWORD(pTransmitKey->dwTSC47_16));
+        *((unsigned char *)(pMICHDR+10)) = HIBYTE(LOWORD(pTransmitKey->dwTSC47_16));
+        *((unsigned char *)(pMICHDR+11)) = LOBYTE(LOWORD(pTransmitKey->dwTSC47_16));
+        *((unsigned char *)(pMICHDR+12)) = HIBYTE(pTransmitKey->wTSC15_0);
+        *((unsigned char *)(pMICHDR+13)) = LOBYTE(pTransmitKey->wTSC15_0);
+        *((unsigned char *)(pMICHDR+14)) = HIBYTE(wPayloadLen);
+        *((unsigned char *)(pMICHDR+15)) = LOBYTE(wPayloadLen);
 
         //Fill MICHDR1
-        *((PBYTE)(pMICHDR+16)) = 0; // HLEN[15:8]
+        *((unsigned char *)(pMICHDR+16)) = 0; // HLEN[15:8]
         if (pDevice->bLongHeader) {
-            *((PBYTE)(pMICHDR+17)) = 28; // HLEN[7:0]
+            *((unsigned char *)(pMICHDR+17)) = 28; // HLEN[7:0]
         } else {
-            *((PBYTE)(pMICHDR+17)) = 22; // HLEN[7:0]
+            *((unsigned char *)(pMICHDR+17)) = 22; // HLEN[7:0]
         }
         wValue = cpu_to_le16(pMACHeader->wFrameCtl & 0xC78F);
-        memcpy(pMICHDR+18, (PBYTE)&wValue, 2); // MSKFRACTL
+        memcpy(pMICHDR+18, (unsigned char *)&wValue, 2); // MSKFRACTL
         memcpy(pMICHDR+20, &(pMACHeader->abyAddr1[0]), 6);
         memcpy(pMICHDR+26, &(pMACHeader->abyAddr2[0]), 6);
 
@@ -319,7 +308,7 @@ s_vFillTxKey (
         wValue = pMACHeader->wSeqCtl;
         wValue &= 0x000F;
         wValue = cpu_to_le16(wValue);
-        memcpy(pMICHDR+38, (PBYTE)&wValue, 2); // MSKSEQCTL
+        memcpy(pMICHDR+38, (unsigned char *)&wValue, 2); // MSKSEQCTL
         if (pDevice->bLongHeader) {
             memcpy(pMICHDR+40, &(pMACHeader->abyAddr4[0]), 6);
         }
@@ -332,13 +321,13 @@ void
 s_vSWencryption (
     PSDevice            pDevice,
     PSKeyItem           pTransmitKey,
-    PBYTE               pbyPayloadHead,
-    WORD                wPayloadSize
+    unsigned char *pbyPayloadHead,
+    unsigned short wPayloadSize
     )
 {
-    UINT   cbICVlen = 4;
-    DWORD  dwICV = 0xFFFFFFFFL;
-    PDWORD pdwICV;
+    unsigned int cbICVlen = 4;
+    unsigned long dwICV = 0xFFFFFFFFL;
+    unsigned long *pdwICV;
 
     if (pTransmitKey == NULL)
         return;
@@ -347,7 +336,7 @@ s_vSWencryption (
         //=======================================================================
         // Append ICV after payload
         dwICV = CRCdwGetCrc32Ex(pbyPayloadHead, wPayloadSize, dwICV);//ICV(Payload)
-        pdwICV = (PDWORD)(pbyPayloadHead + wPayloadSize);
+        pdwICV = (unsigned long *)(pbyPayloadHead + wPayloadSize);
         // finally, we must invert dwCRC to get the correct answer
         *pdwICV = cpu_to_le32(~dwICV);
         // RC4 encryption
@@ -358,7 +347,7 @@ s_vSWencryption (
         //=======================================================================
         //Append ICV after payload
         dwICV = CRCdwGetCrc32Ex(pbyPayloadHead, wPayloadSize, dwICV);//ICV(Payload)
-        pdwICV = (PDWORD)(pbyPayloadHead + wPayloadSize);
+        pdwICV = (unsigned long *)(pbyPayloadHead + wPayloadSize);
         // finally, we must invert dwCRC to get the correct answer
         *pdwICV = cpu_to_le32(~dwICV);
         // RC4 encryption
@@ -377,25 +366,25 @@ s_vSWencryption (
              PK_TYPE_11GA    3
 */
 static
-UINT
+unsigned int
 s_uGetTxRsvTime (
     PSDevice pDevice,
-    BYTE     byPktType,
-    UINT     cbFrameLength,
-    WORD     wRate,
-    BOOL     bNeedAck
+    unsigned char byPktType,
+    unsigned int cbFrameLength,
+    unsigned short wRate,
+    bool bNeedAck
     )
 {
-    UINT uDataTime, uAckTime;
+    unsigned int uDataTime, uAckTime;
 
     uDataTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, cbFrameLength, wRate);
 #ifdef	PLICE_DEBUG
 	//printk("s_uGetTxRsvTime is %d\n",uDataTime);
 #endif
     if (byPktType == PK_TYPE_11B) {//llb,CCK mode
-        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (WORD)pDevice->byTopCCKBasicRate);
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopCCKBasicRate);
     } else {//11g 2.4G OFDM mode & 11a 5G OFDM mode
-        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (WORD)pDevice->byTopOFDMBasicRate);
+        uAckTime = BBuGetFrameTime(pDevice->byPreambleType, byPktType, 14, (unsigned short)pDevice->byTopOFDMBasicRate);
     }
 
     if (bNeedAck) {
@@ -408,16 +397,16 @@ s_uGetTxRsvTime (
 
 //byFreqType: 0=>5GHZ 1=>2.4GHZ
 static
-UINT
+unsigned int
 s_uGetRTSCTSRsvTime (
     PSDevice pDevice,
-    BYTE byRTSRsvType,
-    BYTE byPktType,
-    UINT cbFrameLength,
-    WORD wCurrentRate
+    unsigned char byRTSRsvType,
+    unsigned char byPktType,
+    unsigned int cbFrameLength,
+    unsigned short wCurrentRate
     )
 {
-    UINT uRrvTime  , uRTSTime, uCTSTime, uAckTime, uDataTime;
+    unsigned int uRrvTime  , uRTSTime, uCTSTime, uAckTime, uDataTime;
 
     uRrvTime = uRTSTime = uCTSTime = uAckTime = uDataTime = 0;
 
@@ -450,22 +439,22 @@ s_uGetRTSCTSRsvTime (
 
 //byFreqType 0: 5GHz, 1:2.4Ghz
 static
-UINT
+unsigned int
 s_uGetDataDuration (
     PSDevice pDevice,
-    BYTE     byDurType,
-    UINT     cbFrameLength,
-    BYTE     byPktType,
-    WORD     wRate,
-    BOOL     bNeedAck,
-    UINT     uFragIdx,
-    UINT     cbLastFragmentSize,
-    UINT     uMACfragNum,
-    BYTE     byFBOption
+    unsigned char byDurType,
+    unsigned int cbFrameLength,
+    unsigned char byPktType,
+    unsigned short wRate,
+    bool bNeedAck,
+    unsigned int uFragIdx,
+    unsigned int cbLastFragmentSize,
+    unsigned int uMACfragNum,
+    unsigned char byFBOption
     )
 {
-    BOOL bLastFrag = 0;
-    UINT uAckTime =0, uNextPktTime = 0;
+    bool bLastFrag = 0;
+    unsigned int uAckTime =0, uNextPktTime = 0;
 
 
 
@@ -614,25 +603,25 @@ s_uGetDataDuration (
         break;
     }
 
-	ASSERT(FALSE);
+	ASSERT(false);
 	return 0;
 }
 
 
 //byFreqType: 0=>5GHZ 1=>2.4GHZ
 static
-UINT
+unsigned int
 s_uGetRTSCTSDuration (
     PSDevice pDevice,
-    BYTE byDurType,
-    UINT cbFrameLength,
-    BYTE byPktType,
-    WORD wRate,
-    BOOL bNeedAck,
-    BYTE byFBOption
+    unsigned char byDurType,
+    unsigned int cbFrameLength,
+    unsigned char byPktType,
+    unsigned short wRate,
+    bool bNeedAck,
+    unsigned char byFBOption
     )
 {
-    UINT uCTSTime = 0, uDurTime = 0;
+    unsigned int uCTSTime = 0, uDurTime = 0;
 
 
     switch (byDurType) {
@@ -719,22 +708,22 @@ s_uGetRTSCTSDuration (
 
 
 static
-UINT
+unsigned int
 s_uFillDataHead (
     PSDevice pDevice,
-    BYTE     byPktType,
+    unsigned char byPktType,
     void *   pTxDataHead,
-    UINT     cbFrameLength,
-    UINT     uDMAIdx,
-    BOOL     bNeedAck,
-    UINT     uFragIdx,
-    UINT     cbLastFragmentSize,
-    UINT     uMACfragNum,
-    BYTE     byFBOption,
-    WORD     wCurrentRate
+    unsigned int cbFrameLength,
+    unsigned int uDMAIdx,
+    bool bNeedAck,
+    unsigned int uFragIdx,
+    unsigned int cbLastFragmentSize,
+    unsigned int uMACfragNum,
+    unsigned char byFBOption,
+    unsigned short wCurrentRate
     )
 {
-    WORD  wLen = 0x0000;
+    unsigned short wLen = 0x0000;
 
     if (pTxDataHead == NULL) {
         return 0;
@@ -745,19 +734,19 @@ s_uFillDataHead (
             PSTxDataHead_g pBuf = (PSTxDataHead_g)pTxDataHead;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_a), (unsigned char *)&(pBuf->bySignalField_a)
             );
             pBuf->wTransmitLength_a = cpu_to_le16(wLen);
             BBvCaculateParameter(pDevice, cbFrameLength, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
             //Get Duration and TimeStamp
-            pBuf->wDuration_a = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength,
+            pBuf->wDuration_a = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength,
                                                          byPktType, wCurrentRate, bNeedAck, uFragIdx,
                                                          cbLastFragmentSize, uMACfragNum,
                                                          byFBOption)); //1: 2.4GHz
-            pBuf->wDuration_b = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength,
+            pBuf->wDuration_b = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength,
                                                          PK_TYPE_11B, pDevice->byTopCCKBasicRate,
                                                          bNeedAck, uFragIdx, cbLastFragmentSize,
                                                          uMACfragNum, byFBOption)); //1: 2.4
@@ -771,21 +760,21 @@ s_uFillDataHead (
             PSTxDataHead_g_FB pBuf = (PSTxDataHead_g_FB)pTxDataHead;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_a), (unsigned char *)&(pBuf->bySignalField_a)
             );
             pBuf->wTransmitLength_a = cpu_to_le16(wLen);
             BBvCaculateParameter(pDevice, cbFrameLength, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
             //Get Duration and TimeStamp
-            pBuf->wDuration_a = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
+            pBuf->wDuration_a = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
                                          wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
-            pBuf->wDuration_b = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, PK_TYPE_11B,
+            pBuf->wDuration_b = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, PK_TYPE_11B,
                                          pDevice->byTopCCKBasicRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
-            pBuf->wDuration_a_f0 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktType,
+            pBuf->wDuration_a_f0 = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktType,
                                          wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
-            pBuf->wDuration_a_f1 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktType,
+            pBuf->wDuration_a_f1 = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktType,
                                          wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //1: 2.4GHz
 
             pBuf->wTimeStampOff_a = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
@@ -800,16 +789,16 @@ s_uFillDataHead (
             PSTxDataHead_a_FB pBuf = (PSTxDataHead_a_FB)pTxDataHead;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
             );
             pBuf->wTransmitLength = cpu_to_le16(wLen);
             //Get Duration and TimeStampOff
 
-            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
+            pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
-            pBuf->wDuration_f0 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktType,
+            pBuf->wDuration_f0 = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A_F0, cbFrameLength, byPktType,
                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
-            pBuf->wDuration_f1 = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktType,
+            pBuf->wDuration_f1 = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A_F1, cbFrameLength, byPktType,
                                         wCurrentRate, bNeedAck, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption)); //0: 5GHz
             pBuf->wTimeStampOff = cpu_to_le16(wTimeStampOff[pDevice->byPreambleType%2][wCurrentRate%MAX_RATE]);
             return (pBuf->wDuration);
@@ -817,12 +806,12 @@ s_uFillDataHead (
             PSTxDataHead_ab pBuf = (PSTxDataHead_ab)pTxDataHead;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
             );
             pBuf->wTransmitLength = cpu_to_le16(wLen);
             //Get Duration and TimeStampOff
 
-            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
+            pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameLength, byPktType,
                                                        wCurrentRate, bNeedAck, uFragIdx,
                                                        cbLastFragmentSize, uMACfragNum,
                                                        byFBOption));
@@ -835,11 +824,11 @@ s_uFillDataHead (
             PSTxDataHead_ab pBuf = (PSTxDataHead_ab)pTxDataHead;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, cbFrameLength, wCurrentRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
             );
             pBuf->wTransmitLength = cpu_to_le16(wLen);
             //Get Duration and TimeStampOff
-            pBuf->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, byPktType,
+            pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameLength, byPktType,
                                                        wCurrentRate, bNeedAck, uFragIdx,
                                                        cbLastFragmentSize, uMACfragNum,
                                                        byFBOption));
@@ -854,18 +843,18 @@ static
 void
 s_vFillRTSHead (
     PSDevice         pDevice,
-    BYTE             byPktType,
+    unsigned char byPktType,
     void *           pvRTS,
-    UINT             cbFrameLength,
-    BOOL             bNeedAck,
-    BOOL             bDisCRC,
+    unsigned int cbFrameLength,
+    bool bNeedAck,
+    bool bDisCRC,
     PSEthernetHeader psEthHeader,
-    WORD             wCurrentRate,
-    BYTE             byFBOption
+    unsigned short wCurrentRate,
+    unsigned char byFBOption
     )
 {
-    UINT uRTSFrameLen = 20;
-    WORD  wLen = 0x0000;
+    unsigned int uRTSFrameLen = 20;
+    unsigned short wLen = 0x0000;
 
     if (pvRTS == NULL)
     	return;
@@ -883,17 +872,17 @@ s_vFillRTSHead (
             PSRTS_g pBuf = (PSRTS_g)pvRTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_a), (unsigned char *)&(pBuf->bySignalField_a)
             );
             pBuf->wTransmitLength_a = cpu_to_le16(wLen);
             //Get Duration
-            pBuf->wDuration_bb = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
-            pBuf->wDuration_aa = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3: 2.4G OFDMData
-            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wDuration_bb = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+            pBuf->wDuration_aa = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3: 2.4G OFDMData
+            pBuf->wDuration_ba = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
 
             pBuf->Data.wDurationID = pBuf->wDuration_aa;
             //Get RTS Frame body
@@ -916,22 +905,22 @@ s_vFillRTSHead (
            PSRTS_g_FB pBuf = (PSRTS_g_FB)pvRTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_a), (PBYTE)&(pBuf->bySignalField_a)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_a), (unsigned char *)&(pBuf->bySignalField_a)
             );
             pBuf->wTransmitLength_a = cpu_to_le16(wLen);
 
             //Get Duration
-            pBuf->wDuration_bb = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
-            pBuf->wDuration_aa = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3:2.4G OFDMData
-            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDMData
-            pBuf->wRTSDuration_ba_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //4:wRTSDuration_ba_f0, 1:2.4G, 1:CCKData
-            pBuf->wRTSDuration_aa_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //5:wRTSDuration_aa_f0, 1:2.4G, 1:CCKData
-            pBuf->wRTSDuration_ba_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //6:wRTSDuration_ba_f1, 1:2.4G, 1:CCKData
-            pBuf->wRTSDuration_aa_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //7:wRTSDuration_aa_f1, 1:2.4G, 1:CCKData
+            pBuf->wDuration_bb = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, PK_TYPE_11B, pDevice->byTopCCKBasicRate, bNeedAck, byFBOption));    //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+            pBuf->wDuration_aa = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //2:RTSDuration_aa, 1:2.4G, 2,3:2.4G OFDMData
+            pBuf->wDuration_ba = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //1:RTSDuration_ba, 1:2.4G, 2,3:2.4G OFDMData
+            pBuf->wRTSDuration_ba_f0 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //4:wRTSDuration_ba_f0, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_aa_f0 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //5:wRTSDuration_aa_f0, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_ba_f1 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //6:wRTSDuration_ba_f1, 1:2.4G, 1:CCKData
+            pBuf->wRTSDuration_aa_f1 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption));    //7:wRTSDuration_aa_f1, 1:2.4G, 1:CCKData
             pBuf->Data.wDurationID = pBuf->wDuration_aa;
             //Get RTS Frame body
             pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
@@ -958,11 +947,11 @@ s_vFillRTSHead (
             PSRTS_ab pBuf = (PSRTS_ab)pvRTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
             );
             pBuf->wTransmitLength = cpu_to_le16(wLen);
             //Get Duration
-            pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
+            pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
     	    pBuf->Data.wDurationID = pBuf->wDuration;
             //Get RTS Frame body
             pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
@@ -987,13 +976,13 @@ s_vFillRTSHead (
             PSRTS_a_FB pBuf = (PSRTS_a_FB)pvRTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopOFDMBasicRate, byPktType,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
             );
             pBuf->wTransmitLength = cpu_to_le16(wLen);
             //Get Duration
-            pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
-    	    pBuf->wRTSDuration_f0 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //5:RTSDuration_aa_f0, 0:5G, 0: 5G OFDMData
-    	    pBuf->wRTSDuration_f1 = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //7:RTSDuration_aa_f1, 0:5G, 0:
+            pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_aa, 0:5G, 0: 5G OFDMData
+    	    pBuf->wRTSDuration_f0 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //5:RTSDuration_aa_f0, 0:5G, 0: 5G OFDMData
+    	    pBuf->wRTSDuration_f1 = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_AA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //7:RTSDuration_aa_f1, 0:5G, 0:
     	    pBuf->Data.wDurationID = pBuf->wDuration;
     	    //Get RTS Frame body
             pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
@@ -1017,11 +1006,11 @@ s_vFillRTSHead (
         PSRTS_ab pBuf = (PSRTS_ab)pvRTS;
         //Get SignalField,ServiceField,Length
         BBvCaculateParameter(pDevice, uRTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-            (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField), (PBYTE)&(pBuf->bySignalField)
+            (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField), (unsigned char *)&(pBuf->bySignalField)
         );
         pBuf->wTransmitLength = cpu_to_le16(wLen);
         //Get Duration
-        pBuf->wDuration = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_bb, 1:2.4G, 1:CCKData
+        pBuf->wDuration = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, RTSDUR_BB, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //0:RTSDuration_bb, 1:2.4G, 1:CCKData
         pBuf->Data.wDurationID = pBuf->wDuration;
         //Get RTS Frame body
         pBuf->Data.wFrameControl = TYPE_CTL_RTS;//0x00B4
@@ -1048,18 +1037,18 @@ static
 void
 s_vFillCTSHead (
     PSDevice pDevice,
-    UINT     uDMAIdx,
-    BYTE     byPktType,
+    unsigned int uDMAIdx,
+    unsigned char byPktType,
     void *   pvCTS,
-    UINT     cbFrameLength,
-    BOOL     bNeedAck,
-    BOOL     bDisCRC,
-    WORD     wCurrentRate,
-    BYTE     byFBOption
+    unsigned int cbFrameLength,
+    bool bNeedAck,
+    bool bDisCRC,
+    unsigned short wCurrentRate,
+    unsigned char byFBOption
     )
 {
-    UINT uCTSFrameLen = 14;
-    WORD  wLen = 0x0000;
+    unsigned int uCTSFrameLen = 14;
+    unsigned short wLen = 0x0000;
 
     if (pvCTS == NULL) {
         return;
@@ -1077,21 +1066,21 @@ s_vFillCTSHead (
             PSCTS_FB pBuf = (PSCTS_FB)pvCTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uCTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
 
 
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
 
-            pBuf->wDuration_ba = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wDuration_ba = (unsigned short)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
             pBuf->wDuration_ba += pDevice->wCTSDuration;
             pBuf->wDuration_ba = cpu_to_le16(pBuf->wDuration_ba);
             //Get CTSDuration_ba_f0
-            pBuf->wCTSDuration_ba_f0 = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //8:CTSDuration_ba_f0, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wCTSDuration_ba_f0 = (unsigned short)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F0, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //8:CTSDuration_ba_f0, 1:2.4G, 2,3:2.4G OFDM Data
             pBuf->wCTSDuration_ba_f0 += pDevice->wCTSDuration;
             pBuf->wCTSDuration_ba_f0 = cpu_to_le16(pBuf->wCTSDuration_ba_f0);
             //Get CTSDuration_ba_f1
-            pBuf->wCTSDuration_ba_f1 = (WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //9:CTSDuration_ba_f1, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wCTSDuration_ba_f1 = (unsigned short)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA_F1, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption); //9:CTSDuration_ba_f1, 1:2.4G, 2,3:2.4G OFDM Data
             pBuf->wCTSDuration_ba_f1 += pDevice->wCTSDuration;
             pBuf->wCTSDuration_ba_f1 = cpu_to_le16(pBuf->wCTSDuration_ba_f1);
             //Get CTS Frame body
@@ -1104,11 +1093,11 @@ s_vFillCTSHead (
             PSCTS pBuf = (PSCTS)pvCTS;
             //Get SignalField,ServiceField,Length
             BBvCaculateParameter(pDevice, uCTSFrameLen, pDevice->byTopCCKBasicRate, PK_TYPE_11B,
-                (PWORD)&(wLen), (PBYTE)&(pBuf->byServiceField_b), (PBYTE)&(pBuf->bySignalField_b)
+                (unsigned short *)&(wLen), (unsigned char *)&(pBuf->byServiceField_b), (unsigned char *)&(pBuf->bySignalField_b)
             );
             pBuf->wTransmitLength_b = cpu_to_le16(wLen);
             //Get CTSDuration_ba
-            pBuf->wDuration_ba = cpu_to_le16((WORD)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
+            pBuf->wDuration_ba = cpu_to_le16((unsigned short)s_uGetRTSCTSDuration(pDevice, CTSDUR_BA, cbFrameLength, byPktType, wCurrentRate, bNeedAck, byFBOption)); //3:CTSDuration_ba, 1:2.4G, 2,3:2.4G OFDM Data
             pBuf->wDuration_ba += pDevice->wCTSDuration;
             pBuf->wDuration_ba = cpu_to_le16(pBuf->wDuration_ba);
 
@@ -1148,28 +1137,28 @@ s_vFillCTSHead (
  * Return Value: none
  *
 -*/
-// UINT            cbFrameSize,//Hdr+Payload+FCS
+// unsigned int cbFrameSize,//Hdr+Payload+FCS
 static
 void
 s_vGenerateTxParameter (
     PSDevice         pDevice,
-    BYTE             byPktType,
+    unsigned char byPktType,
     void *           pTxBufHead,
     void *           pvRrvTime,
     void *           pvRTS,
     void *           pvCTS,
-    UINT             cbFrameSize,
-    BOOL             bNeedACK,
-    UINT             uDMAIdx,
+    unsigned int cbFrameSize,
+    bool bNeedACK,
+    unsigned int uDMAIdx,
     PSEthernetHeader psEthHeader,
-    WORD             wCurrentRate
+    unsigned short wCurrentRate
     )
 {
-    UINT cbMACHdLen = WLAN_HDR_ADDR3_LEN; //24
-    WORD wFifoCtl;
-    BOOL bDisCRC = FALSE;
-    BYTE byFBOption = AUTO_FB_NONE;
-//    WORD wCurrentRate = pDevice->wCurrentRate;
+    unsigned int cbMACHdLen = WLAN_HDR_ADDR3_LEN; //24
+    unsigned short wFifoCtl;
+    bool bDisCRC = false;
+    unsigned char byFBOption = AUTO_FB_NONE;
+//    unsigned short wCurrentRate = pDevice->wCurrentRate;
 
     //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter...\n");
     PSTxBufHead pFifoHead = (PSTxBufHead)pTxBufHead;
@@ -1177,7 +1166,7 @@ s_vGenerateTxParameter (
     wFifoCtl = pFifoHead->wFIFOCtl;
 
     if (wFifoCtl & FIFOCTL_CRCDIS) {
-        bDisCRC = TRUE;
+        bDisCRC = true;
     }
 
     if (wFifoCtl & FIFOCTL_AUTO_FB_0) {
@@ -1196,11 +1185,11 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_gRTS pBuf = (PSRrvTime_gRTS)pvRrvTime;
-                pBuf->wRTSTxRrvTime_aa = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 2, byPktType, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 1:2.4GHz
-                pBuf->wRTSTxRrvTime_ba = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 1, byPktType, cbFrameSize, wCurrentRate));//1:RTSTxRrvTime_ba, 1:2.4GHz
-                pBuf->wRTSTxRrvTime_bb = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 0, byPktType, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
-                pBuf->wTxRrvTime_a = cpu_to_le16((WORD) s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
-                pBuf->wTxRrvTime_b = cpu_to_le16((WORD) s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
+                pBuf->wRTSTxRrvTime_aa = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 2, byPktType, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 1:2.4GHz
+                pBuf->wRTSTxRrvTime_ba = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 1, byPktType, cbFrameSize, wCurrentRate));//1:RTSTxRrvTime_ba, 1:2.4GHz
+                pBuf->wRTSTxRrvTime_bb = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 0, byPktType, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
+                pBuf->wTxRrvTime_a = cpu_to_le16((unsigned short) s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
+                pBuf->wTxRrvTime_b = cpu_to_le16((unsigned short) s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
             }
             //Fill RTS
             s_vFillRTSHead(pDevice, byPktType, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
@@ -1210,9 +1199,9 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_gCTS pBuf = (PSRrvTime_gCTS)pvRrvTime;
-                pBuf->wTxRrvTime_a = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
-                pBuf->wTxRrvTime_b = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
-                pBuf->wCTSTxRrvTime_ba = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 3, byPktType, cbFrameSize, wCurrentRate));//3:CTSTxRrvTime_Ba, 1:2.4GHz
+                pBuf->wTxRrvTime_a = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//2.4G OFDM
+                pBuf->wTxRrvTime_b = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, pDevice->byTopCCKBasicRate, bNeedACK));//1:CCK
+                pBuf->wCTSTxRrvTime_ba = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 3, byPktType, cbFrameSize, wCurrentRate));//3:CTSTxRrvTime_Ba, 1:2.4GHz
             }
 
 
@@ -1226,8 +1215,8 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
-                pBuf->wRTSTxRrvTime = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 2, byPktType, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 0:5GHz
-                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//0:OFDM
+                pBuf->wRTSTxRrvTime = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 2, byPktType, cbFrameSize, wCurrentRate));//2:RTSTxRrvTime_aa, 0:5GHz
+                pBuf->wTxRrvTime = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, byPktType, cbFrameSize, wCurrentRate, bNeedACK));//0:OFDM
             }
             //Fill RTS
             s_vFillRTSHead(pDevice, byPktType, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
@@ -1236,7 +1225,7 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
-                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11A, cbFrameSize, wCurrentRate, bNeedACK)); //0:OFDM
+                pBuf->wTxRrvTime = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, PK_TYPE_11A, cbFrameSize, wCurrentRate, bNeedACK)); //0:OFDM
             }
         }
     }
@@ -1246,8 +1235,8 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
-                pBuf->wRTSTxRrvTime = cpu_to_le16((WORD)s_uGetRTSCTSRsvTime(pDevice, 0, byPktType, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
-                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK));//1:CCK
+                pBuf->wRTSTxRrvTime = cpu_to_le16((unsigned short)s_uGetRTSCTSRsvTime(pDevice, 0, byPktType, cbFrameSize, wCurrentRate));//0:RTSTxRrvTime_bb, 1:2.4GHz
+                pBuf->wTxRrvTime = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK));//1:CCK
             }
             //Fill RTS
             s_vFillRTSHead(pDevice, byPktType, pvRTS, cbFrameSize, bNeedACK, bDisCRC, psEthHeader, wCurrentRate, byFBOption);
@@ -1256,26 +1245,26 @@ s_vGenerateTxParameter (
             //Fill RsvTime
             if (pvRrvTime) {
                 PSRrvTime_ab pBuf = (PSRrvTime_ab)pvRrvTime;
-                pBuf->wTxRrvTime = cpu_to_le16((WORD)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK)); //1:CCK
+                pBuf->wTxRrvTime = cpu_to_le16((unsigned short)s_uGetTxRsvTime(pDevice, PK_TYPE_11B, cbFrameSize, wCurrentRate, bNeedACK)); //1:CCK
             }
         }
     }
     //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vGenerateTxParameter END.\n");
 }
 /*
-    PBYTE pbyBuffer,//point to pTxBufHead
-    WORD  wFragType,//00:Non-Frag, 01:Start, 02:Mid, 03:Last
-    UINT  cbFragmentSize,//Hdr+payoad+FCS
+    unsigned char *pbyBuffer,//point to pTxBufHead
+    unsigned short wFragType,//00:Non-Frag, 01:Start, 02:Mid, 03:Last
+    unsigned int cbFragmentSize,//Hdr+payoad+FCS
 */
 static
 void
 s_vFillFragParameter(
     PSDevice pDevice,
-    PBYTE    pbyBuffer,
-    UINT     uTxType,
+    unsigned char *pbyBuffer,
+    unsigned int uTxType,
     void *   pvtdCurr,
-    WORD     wFragType,
-    UINT     cbReqCount
+    unsigned short wFragType,
+    unsigned int cbReqCount
     )
 {
     PSTxBufHead pTxBufHead = (PSTxBufHead) pbyBuffer;
@@ -1289,7 +1278,7 @@ s_vFillFragParameter(
         ptdCurr->m_wFIFOCtl = pTxBufHead->wFIFOCtl;
         ptdCurr->m_wTimeStamp = pTxBufHead->wTimeStamp;
         //Set TSR1 & ReqCount in TxDescHead
-        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((unsigned short)(cbReqCount));
         if (wFragType == FRAGCTL_ENDFRAG) { //Last Fragmentation
             ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
         }
@@ -1301,7 +1290,7 @@ s_vFillFragParameter(
         //PSTxDesc ptdCurr = (PSTxDesc)s_pvGetTxDescHead(pDevice, uTxType, uCurIdx);
         PSTxDesc ptdCurr = (PSTxDesc)pvtdCurr;
         //Set TSR1 & ReqCount in TxDescHead
-        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((unsigned short)(cbReqCount));
         if (wFragType == FRAGCTL_ENDFRAG) { //Last Fragmentation
             ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
         }
@@ -1310,81 +1299,70 @@ s_vFillFragParameter(
         }
     }
 
-    pTxBufHead->wFragCtl |= (WORD)wFragType;//0x0001; //0000 0000 0000 0001
+    pTxBufHead->wFragCtl |= (unsigned short)wFragType;//0x0001; //0000 0000 0000 0001
 
     //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"s_vFillFragParameter END\n");
 }
 
-static
-UINT
-s_cbFillTxBufHead (
-    PSDevice         pDevice,
-    BYTE             byPktType,
-    PBYTE            pbyTxBufferAddr,
-    UINT             cbFrameBodySize,
-    UINT             uDMAIdx,
-    PSTxDesc         pHeadTD,
-    PSEthernetHeader psEthHeader,
-    PBYTE            pPacket,
-    BOOL             bNeedEncrypt,
-    PSKeyItem        pTransmitKey,
-    UINT             uNodeIndex,
-    PUINT            puMACfragNum
-    )
+static unsigned int
+s_cbFillTxBufHead(PSDevice pDevice, unsigned char byPktType, unsigned char *pbyTxBufferAddr,
+	unsigned int cbFrameBodySize, unsigned int uDMAIdx, PSTxDesc pHeadTD,
+	PSEthernetHeader psEthHeader, unsigned char *pPacket, bool bNeedEncrypt,
+	PSKeyItem pTransmitKey, unsigned int uNodeIndex, unsigned int *puMACfragNum)
 {
-    UINT           cbMACHdLen;
-    UINT           cbFrameSize;
-    UINT           cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
-    UINT           cbFragPayloadSize;
-    UINT           cbLastFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
-    UINT           cbLastFragPayloadSize;
-    UINT           uFragIdx;
-    PBYTE          pbyPayloadHead;
-    PBYTE          pbyIVHead;
-    PBYTE          pbyMacHdr;
-    WORD           wFragType; //00:Non-Frag, 01:Start, 10:Mid, 11:Last
-    UINT           uDuration;
-    PBYTE          pbyBuffer;
-//    UINT           uKeyEntryIdx = NUM_KEY_ENTRY+1;
-//    BYTE           byKeySel = 0xFF;
-    UINT           cbIVlen = 0;
-    UINT           cbICVlen = 0;
-    UINT           cbMIClen = 0;
-    UINT           cbFCSlen = 4;
-    UINT           cb802_1_H_len = 0;
-    UINT           uLength = 0;
-    UINT           uTmpLen = 0;
-//    BYTE           abyTmp[8];
-//    DWORD          dwCRC;
-    UINT           cbMICHDR = 0;
-    DWORD          dwMICKey0, dwMICKey1;
-    DWORD          dwMIC_Priority;
-    PDWORD         pdwMIC_L;
-    PDWORD         pdwMIC_R;
-    DWORD          dwSafeMIC_L, dwSafeMIC_R; //Fix "Last Frag Size" < "MIC length".
-    BOOL           bMIC2Frag = FALSE;
-    UINT           uMICFragLen = 0;
-    UINT           uMACfragNum = 1;
-    UINT           uPadding = 0;
-    UINT           cbReqCount = 0;
-
-    BOOL           bNeedACK;
-    BOOL           bRTS;
-    BOOL           bIsAdhoc;
-    PBYTE          pbyType;
+    unsigned int cbMACHdLen;
+    unsigned int cbFrameSize;
+    unsigned int cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    unsigned int cbFragPayloadSize;
+    unsigned int cbLastFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    unsigned int cbLastFragPayloadSize;
+    unsigned int uFragIdx;
+    unsigned char *pbyPayloadHead;
+    unsigned char *pbyIVHead;
+    unsigned char *pbyMacHdr;
+    unsigned short wFragType; //00:Non-Frag, 01:Start, 10:Mid, 11:Last
+    unsigned int uDuration;
+    unsigned char *pbyBuffer;
+//    unsigned int uKeyEntryIdx = NUM_KEY_ENTRY+1;
+//    unsigned char byKeySel = 0xFF;
+    unsigned int cbIVlen = 0;
+    unsigned int cbICVlen = 0;
+    unsigned int cbMIClen = 0;
+    unsigned int cbFCSlen = 4;
+    unsigned int cb802_1_H_len = 0;
+    unsigned int uLength = 0;
+    unsigned int uTmpLen = 0;
+//    unsigned char abyTmp[8];
+//    unsigned long dwCRC;
+    unsigned int cbMICHDR = 0;
+    unsigned long dwMICKey0, dwMICKey1;
+    unsigned long dwMIC_Priority;
+    unsigned long *pdwMIC_L;
+    unsigned long *pdwMIC_R;
+    unsigned long dwSafeMIC_L, dwSafeMIC_R; //Fix "Last Frag Size" < "MIC length".
+    bool bMIC2Frag = false;
+    unsigned int uMICFragLen = 0;
+    unsigned int uMACfragNum = 1;
+    unsigned int uPadding = 0;
+    unsigned int cbReqCount = 0;
+
+    bool bNeedACK;
+    bool bRTS;
+    bool bIsAdhoc;
+    unsigned char *pbyType;
     PSTxDesc       ptdCurr;
     PSTxBufHead    psTxBufHd = (PSTxBufHead) pbyTxBufferAddr;
-//    UINT           tmpDescIdx;
-    UINT           cbHeaderLength = 0;
+//    unsigned int tmpDescIdx;
+    unsigned int cbHeaderLength = 0;
     void *         pvRrvTime;
     PSMICHDRHead   pMICHDR;
     void *         pvRTS;
     void *         pvCTS;
     void *         pvTxDataHd;
-    WORD           wTxBufSize;   // FFinfo size
-    UINT           uTotalCopyLength = 0;
-    BYTE           byFBOption = AUTO_FB_NONE;
-    BOOL           bIsWEP256 = FALSE;
+    unsigned short wTxBufSize;   // FFinfo size
+    unsigned int uTotalCopyLength = 0;
+    unsigned char byFBOption = AUTO_FB_NONE;
+    bool bIsWEP256 = false;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
 
 
@@ -1394,19 +1372,16 @@ s_cbFillTxBufHead (
     if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
         (pDevice->eOPMode == OP_MODE_AP)) {
 
-        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
-            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
-            bNeedACK = FALSE;
-        }
-        else {
-            bNeedACK = TRUE;
-        }
-        bIsAdhoc = TRUE;
+	if (is_multicast_ether_addr(&(psEthHeader->abyDstAddr[0])))
+		bNeedACK = false;
+        else
+            bNeedACK = true;
+        bIsAdhoc = true;
     }
     else {
         // MSDUs in Infra mode always need ACK
-        bNeedACK = TRUE;
-        bIsAdhoc = FALSE;
+        bNeedACK = true;
+        bIsAdhoc = false;
     }
 
     if (pDevice->bLongHeader)
@@ -1415,12 +1390,12 @@ s_cbFillTxBufHead (
         cbMACHdLen = WLAN_HDR_ADDR3_LEN;
 
 
-    if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL)) {
+    if ((bNeedEncrypt == true) && (pTransmitKey != NULL)) {
         if (pTransmitKey->byCipherSuite == KEY_CTL_WEP) {
             cbIVlen = 4;
             cbICVlen = 4;
             if (pTransmitKey->uKeyLength == WLAN_WEP232_KEYLEN) {
-                bIsWEP256 = TRUE;
+                bIsWEP256 = true;
             }
         }
         if (pTransmitKey->byCipherSuite == KEY_CTL_TKIP) {
@@ -1443,14 +1418,14 @@ s_cbFillTxBufHead (
 
     cbFrameSize = cbMACHdLen + cbIVlen + (cbFrameBodySize + cbMIClen) + cbICVlen + cbFCSlen;
 
-    if ((bNeedACK == FALSE) ||
+    if ((bNeedACK == false) ||
         (cbFrameSize < pDevice->wRTSThreshold) ||
         ((cbFrameSize >= pDevice->wFragmentationThreshold) && (pDevice->wFragmentationThreshold <= pDevice->wRTSThreshold))
         ) {
-        bRTS = FALSE;
+        bRTS = false;
     }
     else {
-        bRTS = TRUE;
+        bRTS = true;
         psTxBufHd->wFIFOCtl |= (FIFOCTL_RTS | FIFOCTL_LRETRY);
     }
     //
@@ -1469,7 +1444,7 @@ s_cbFillTxBufHead (
     if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) {//802.11g packet
 
         if (byFBOption == AUTO_FB_NONE) {
-            if (bRTS == TRUE) {//RTS_need
+            if (bRTS == true) {//RTS_need
                 pvRrvTime = (PSRrvTime_gRTS) (pbyTxBufferAddr + wTxBufSize);
                 pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS));
                 pvRTS = (PSRTS_g) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR);
@@ -1487,7 +1462,7 @@ s_cbFillTxBufHead (
             }
         } else {
             // Auto Fall Back
-            if (bRTS == TRUE) {//RTS_need
+            if (bRTS == true) {//RTS_need
                 pvRrvTime = (PSRrvTime_gRTS) (pbyTxBufferAddr + wTxBufSize);
                 pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS));
                 pvRTS = (PSRTS_g_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_gRTS) + cbMICHDR);
@@ -1508,7 +1483,7 @@ s_cbFillTxBufHead (
     else {//802.11a/b packet
 
         if (byFBOption == AUTO_FB_NONE) {
-            if (bRTS == TRUE) {
+            if (bRTS == true) {
                 pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
                 pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
                 pvRTS = (PSRTS_ab) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
@@ -1526,7 +1501,7 @@ s_cbFillTxBufHead (
             }
         } else {
             // Auto Fall Back
-            if (bRTS == TRUE) {//RTS_need
+            if (bRTS == true) {//RTS_need
                 pvRrvTime = (PSRrvTime_ab) (pbyTxBufferAddr + wTxBufSize);
                 pMICHDR = (PSMICHDRHead) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab));
                 pvRTS = (PSRTS_a_FB) (pbyTxBufferAddr + wTxBufSize + sizeof(SRrvTime_ab) + cbMICHDR);
@@ -1547,40 +1522,40 @@ s_cbFillTxBufHead (
     memset((void *)(pbyTxBufferAddr + wTxBufSize), 0, (cbHeaderLength - wTxBufSize));
 
 //////////////////////////////////////////////////////////////////
-    if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+    if ((bNeedEncrypt == true) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
         if (pDevice->pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
-            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
-            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+            dwMICKey0 = *(unsigned long *)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(unsigned long *)(&pTransmitKey->abyKey[20]);
         }
         else if ((pTransmitKey->dwKeyIndex & AUTHENTICATOR_KEY) != 0) {
-            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
-            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+            dwMICKey0 = *(unsigned long *)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(unsigned long *)(&pTransmitKey->abyKey[20]);
         }
         else {
-            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[24]);
-            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[28]);
+            dwMICKey0 = *(unsigned long *)(&pTransmitKey->abyKey[24]);
+            dwMICKey1 = *(unsigned long *)(&pTransmitKey->abyKey[28]);
         }
         // DO Software Michael
         MIC_vInit(dwMICKey0, dwMICKey1);
-        MIC_vAppend((PBYTE)&(psEthHeader->abyDstAddr[0]), 12);
+        MIC_vAppend((unsigned char *)&(psEthHeader->abyDstAddr[0]), 12);
         dwMIC_Priority = 0;
-        MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+        MIC_vAppend((unsigned char *)&dwMIC_Priority, 4);
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
     }
 
 ///////////////////////////////////////////////////////////////////
 
-    pbyMacHdr = (PBYTE)(pbyTxBufferAddr + cbHeaderLength);
-    pbyPayloadHead = (PBYTE)(pbyMacHdr + cbMACHdLen + uPadding + cbIVlen);
-    pbyIVHead = (PBYTE)(pbyMacHdr + cbMACHdLen + uPadding);
+    pbyMacHdr = (unsigned char *)(pbyTxBufferAddr + cbHeaderLength);
+    pbyPayloadHead = (unsigned char *)(pbyMacHdr + cbMACHdLen + uPadding + cbIVlen);
+    pbyIVHead = (unsigned char *)(pbyMacHdr + cbMACHdLen + uPadding);
 
-    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == TRUE) && (bIsWEP256 == FALSE)) {
+    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == true) && (bIsWEP256 == false)) {
         // Fragmentation
         // FragThreshold = Fragment size(Hdr+(IV)+fragment payload+(MIC)+(ICV)+FCS)
         cbFragmentSize = pDevice->wFragmentationThreshold;
         cbFragPayloadSize = cbFragmentSize - cbMACHdLen - cbIVlen - cbICVlen - cbFCSlen;
         //FragNum = (FrameSize-(Hdr+FCS))/(Fragment Size -(Hrd+FCS)))
-        uMACfragNum = (WORD) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
+        uMACfragNum = (unsigned short) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
         cbLastFragPayloadSize = (cbFrameBodySize + cbMIClen) % cbFragPayloadSize;
         if (cbLastFragPayloadSize == 0) {
             cbLastFragPayloadSize = cbFragPayloadSize;
@@ -1606,13 +1581,13 @@ s_cbFillTxBufHead (
                 uDuration = s_uFillDataHead(pDevice, byPktType, pvTxDataHd, cbFragmentSize, uDMAIdx, bNeedACK,
                                             uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
                 // Generate TX MAC Header
-                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                vGenerateMACHeader(pDevice, pbyMacHdr, (unsigned short)uDuration, psEthHeader, bNeedEncrypt,
                                    wFragType, uDMAIdx, uFragIdx);
 
-                if (bNeedEncrypt == TRUE) {
+                if (bNeedEncrypt == true) {
                     //Fill TXKEY
-                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
-                                 pbyMacHdr, (WORD)cbFragPayloadSize, (PBYTE)pMICHDR);
+                    s_vFillTxKey(pDevice, (unsigned char *)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (unsigned short)cbFragPayloadSize, (unsigned char *)pMICHDR);
                     //Fill IV(ExtIV,RSNHDR)
                     if (pDevice->bEnableHostWEP) {
                         pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
@@ -1625,13 +1600,13 @@ s_cbFillTxBufHead (
                 if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
                     if ((psEthHeader->wType == TYPE_PKT_IPX) ||
                         (psEthHeader->wType == cpu_to_le16(0xF380))) {
-                        memcpy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
+                        memcpy((unsigned char *) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
                     }
                     else {
-                        memcpy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
+                        memcpy((unsigned char *) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
                     }
-                    pbyType = (PBYTE) (pbyPayloadHead + 6);
-                    memcpy(pbyType, &(psEthHeader->wType), sizeof(WORD));
+                    pbyType = (unsigned char *) (pbyPayloadHead + 6);
+                    memcpy(pbyType, &(psEthHeader->wType), sizeof(unsigned short));
                     cb802_1_H_len = 8;
                 }
 
@@ -1641,15 +1616,15 @@ s_cbFillTxBufHead (
                 //---------------------------
                 //Fill MICHDR
                 //if (pDevice->bAES) {
-                //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFragPayloadSize);
+                //    s_vFillMICHDR(pDevice, (unsigned char *)pMICHDR, pbyMacHdr, (unsigned short)cbFragPayloadSize);
                 //}
                 //cbReqCount += s_uDoEncryption(pDevice, psEthHeader, (void *)psTxBufHd, byKeySel,
-                //                                pbyPayloadHead, (WORD)cbFragPayloadSize, uDMAIdx);
+                //                                pbyPayloadHead, (unsigned short)cbFragPayloadSize, uDMAIdx);
 
 
 
-                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
-                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
+                //pbyBuffer = (unsigned char *)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
+                pbyBuffer = (unsigned char *)pHeadTD->pTDInfo->buf;
 
                 uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cb802_1_H_len;
                 //copy TxBufferHeader + MacHeader to desc
@@ -1661,7 +1636,7 @@ s_cbFillTxBufHead (
 
                 uTotalCopyLength += cbFragPayloadSize - cb802_1_H_len;
 
-                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+                if ((bNeedEncrypt == true) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Start MIC: %d\n", cbFragPayloadSize);
                     MIC_vAppend((pbyBuffer + uLength - cb802_1_H_len), cbFragPayloadSize);
 
@@ -1672,7 +1647,7 @@ s_cbFillTxBufHead (
                 //---------------------------
                 if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
                     if (bNeedEncrypt) {
-                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength - cb802_1_H_len), (WORD)cbFragPayloadSize);
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength - cb802_1_H_len), (unsigned short)cbFragPayloadSize);
                         cbReqCount += cbICVlen;
                     }
                 }
@@ -1711,13 +1686,13 @@ s_cbFillTxBufHead (
                                             uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
 
                 // Generate TX MAC Header
-                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                vGenerateMACHeader(pDevice, pbyMacHdr, (unsigned short)uDuration, psEthHeader, bNeedEncrypt,
                                    wFragType, uDMAIdx, uFragIdx);
 
-                if (bNeedEncrypt == TRUE) {
+                if (bNeedEncrypt == true) {
                     //Fill TXKEY
-                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
-                                 pbyMacHdr, (WORD)cbLastFragPayloadSize, (PBYTE)pMICHDR);
+                    s_vFillTxKey(pDevice, (unsigned char *)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (unsigned short)cbLastFragPayloadSize, (unsigned char *)pMICHDR);
 
                     if (pDevice->bEnableHostWEP) {
                         pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
@@ -1734,8 +1709,8 @@ s_cbFillTxBufHead (
 
 
 
-                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
-                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
+                pbyBuffer = (unsigned char *)pHeadTD->pTDInfo->buf;
+                //pbyBuffer = (unsigned char *)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
 
                 uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen;
 
@@ -1743,7 +1718,7 @@ s_cbFillTxBufHead (
                 memcpy(pbyBuffer, (void *)psTxBufHd, uLength);
 
                 // Copy the Packet into a tx Buffer
-                if (bMIC2Frag == FALSE) {
+                if (bMIC2Frag == false) {
 
                     memcpy((pbyBuffer + uLength),
                              (pPacket + 14 + uTotalCopyLength),
@@ -1753,36 +1728,36 @@ s_cbFillTxBufHead (
                     uTmpLen = cbLastFragPayloadSize - cbMIClen;
 
                 }
-                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+                if ((bNeedEncrypt == true) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen:%d, cbLastFragPayloadSize:%d, uTmpLen:%d\n",
                                    uMICFragLen, cbLastFragPayloadSize, uTmpLen);
 
-                    if (bMIC2Frag == FALSE) {
+                    if (bMIC2Frag == false) {
                         if (uTmpLen != 0)
                             MIC_vAppend((pbyBuffer + uLength), uTmpLen);
-                        pdwMIC_L = (PDWORD)(pbyBuffer + uLength + uTmpLen);
-                        pdwMIC_R = (PDWORD)(pbyBuffer + uLength + uTmpLen + 4);
+                        pdwMIC_L = (unsigned long *)(pbyBuffer + uLength + uTmpLen);
+                        pdwMIC_R = (unsigned long *)(pbyBuffer + uLength + uTmpLen + 4);
                         MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Last MIC:%lX, %lX\n", *pdwMIC_L, *pdwMIC_R);
                     } else {
                         if (uMICFragLen >= 4) {
-                            memcpy((pbyBuffer + uLength), ((PBYTE)&dwSafeMIC_R + (uMICFragLen - 4)),
+                            memcpy((pbyBuffer + uLength), ((unsigned char *)&dwSafeMIC_R + (uMICFragLen - 4)),
                                      (cbMIClen - uMICFragLen));
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen >= 4: %X, %d\n",
-                                           *(PBYTE)((PBYTE)&dwSafeMIC_R + (uMICFragLen - 4)),
+                                           *(unsigned char *)((unsigned char *)&dwSafeMIC_R + (uMICFragLen - 4)),
                                            (cbMIClen - uMICFragLen));
 
                         } else {
-                            memcpy((pbyBuffer + uLength), ((PBYTE)&dwSafeMIC_L + uMICFragLen),
+                            memcpy((pbyBuffer + uLength), ((unsigned char *)&dwSafeMIC_L + uMICFragLen),
                                      (4 - uMICFragLen));
                             memcpy((pbyBuffer + uLength + (4 - uMICFragLen)), &dwSafeMIC_R, 4);
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"LAST: uMICFragLen < 4: %X, %d\n",
-                                           *(PBYTE)((PBYTE)&dwSafeMIC_R + uMICFragLen - 4),
+                                           *(unsigned char *)((unsigned char *)&dwSafeMIC_R + uMICFragLen - 4),
                                            (cbMIClen - uMICFragLen));
                         }
                         /*
                         for (ii = 0; ii < cbLastFragPayloadSize + 8 + 24; ii++) {
-                            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii - 8 - 24)));
+                            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((unsigned char *)((pbyBuffer + uLength) + ii - 8 - 24)));
                         }
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n\n");
                         */
@@ -1798,7 +1773,7 @@ s_cbFillTxBufHead (
                 //---------------------------
                 if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
                     if (bNeedEncrypt) {
-                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (WORD)cbLastFragPayloadSize);
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (unsigned short)cbLastFragPayloadSize);
                         cbReqCount += cbICVlen;
                     }
                 }
@@ -1841,14 +1816,14 @@ s_cbFillTxBufHead (
                                             uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption, pDevice->wCurrentRate);
 
                 // Generate TX MAC Header
-                vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+                vGenerateMACHeader(pDevice, pbyMacHdr, (unsigned short)uDuration, psEthHeader, bNeedEncrypt,
                                    wFragType, uDMAIdx, uFragIdx);
 
 
-                if (bNeedEncrypt == TRUE) {
+                if (bNeedEncrypt == true) {
                     //Fill TXKEY
-                    s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
-                                 pbyMacHdr, (WORD)cbFragPayloadSize, (PBYTE)pMICHDR);
+                    s_vFillTxKey(pDevice, (unsigned char *)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                                 pbyMacHdr, (unsigned short)cbFragPayloadSize, (unsigned char *)pMICHDR);
 
                     if (pDevice->bEnableHostWEP) {
                         pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
@@ -1862,14 +1837,14 @@ s_cbFillTxBufHead (
                 //---------------------------
                 //Fill MICHDR
                 //if (pDevice->bAES) {
-                //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFragPayloadSize);
+                //    s_vFillMICHDR(pDevice, (unsigned char *)pMICHDR, pbyMacHdr, (unsigned short)cbFragPayloadSize);
                 //}
                 //cbReqCount += s_uDoEncryption(pDevice, psEthHeader, (void *)psTxBufHd, byKeySel,
-                //                              pbyPayloadHead, (WORD)cbFragPayloadSize, uDMAIdx);
+                //                              pbyPayloadHead, (unsigned short)cbFragPayloadSize, uDMAIdx);
 
 
-                pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
-                //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
+                pbyBuffer = (unsigned char *)pHeadTD->pTDInfo->buf;
+                //pbyBuffer = (unsigned char *)pDevice->aamTxBuf[uDMAIdx][tmpDescIdx].pbyVAddr;
 
 
                 uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen;
@@ -1886,17 +1861,17 @@ s_cbFillTxBufHead (
 
                 uTotalCopyLength += uTmpLen;
 
-                if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
+                if ((bNeedEncrypt == true) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
 
                     MIC_vAppend((pbyBuffer + uLength), uTmpLen);
 
                     if (uTmpLen < cbFragPayloadSize) {
-                        bMIC2Frag = TRUE;
+                        bMIC2Frag = true;
                         uMICFragLen = cbFragPayloadSize - uTmpLen;
                         ASSERT(uMICFragLen < cbMIClen);
 
-                        pdwMIC_L = (PDWORD)(pbyBuffer + uLength + uTmpLen);
-                        pdwMIC_R = (PDWORD)(pbyBuffer + uLength + uTmpLen + 4);
+                        pdwMIC_L = (unsigned long *)(pbyBuffer + uLength + uTmpLen);
+                        pdwMIC_R = (unsigned long *)(pbyBuffer + uLength + uTmpLen + 4);
                         MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
                         dwSafeMIC_L = *pdwMIC_L;
                         dwSafeMIC_R = *pdwMIC_R;
@@ -1906,7 +1881,7 @@ s_cbFillTxBufHead (
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Fill MIC in Middle frag [%d]\n", uMICFragLen);
                         /*
                         for (ii = 0; ii < uMICFragLen; ii++) {
-                            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength + uTmpLen) + ii)));
+                            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((unsigned char *)((pbyBuffer + uLength + uTmpLen) + ii)));
                         }
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
                         */
@@ -1915,7 +1890,7 @@ s_cbFillTxBufHead (
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Middle frag len: %d\n", uTmpLen);
                     /*
                     for (ii = 0; ii < uTmpLen; ii++) {
-                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii)));
+                        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((unsigned char *)((pbyBuffer + uLength) + ii)));
                     }
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n\n");
                     */
@@ -1926,7 +1901,7 @@ s_cbFillTxBufHead (
 
                 if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
                     if (bNeedEncrypt) {
-                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (WORD)cbFragPayloadSize);
+                        s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength), (unsigned short)cbFragPayloadSize);
                         cbReqCount += cbICVlen;
                     }
                 }
@@ -1961,7 +1936,7 @@ s_cbFillTxBufHead (
         wFragType = FRAGCTL_NONFRAG;
 
         //Set FragCtl in TxBufferHead
-        psTxBufHd->wFragCtl |= (WORD)wFragType;
+        psTxBufHd->wFragCtl |= (unsigned short)wFragType;
 
         //Fill FIFO,RrvTime,RTS,and CTS
         s_vGenerateTxParameter(pDevice, byPktType, (void *)psTxBufHd, pvRrvTime, pvRTS, pvCTS,
@@ -1971,13 +1946,13 @@ s_cbFillTxBufHead (
                                     0, 0, uMACfragNum, byFBOption, pDevice->wCurrentRate);
 
         // Generate TX MAC Header
-        vGenerateMACHeader(pDevice, pbyMacHdr, (WORD)uDuration, psEthHeader, bNeedEncrypt,
+        vGenerateMACHeader(pDevice, pbyMacHdr, (unsigned short)uDuration, psEthHeader, bNeedEncrypt,
                            wFragType, uDMAIdx, 0);
 
-        if (bNeedEncrypt == TRUE) {
+        if (bNeedEncrypt == true) {
             //Fill TXKEY
-            s_vFillTxKey(pDevice, (PBYTE)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
-                         pbyMacHdr, (WORD)cbFrameBodySize, (PBYTE)pMICHDR);
+            s_vFillTxKey(pDevice, (unsigned char *)(psTxBufHd->adwTxKey), pbyIVHead, pTransmitKey,
+                         pbyMacHdr, (unsigned short)cbFrameBodySize, (unsigned char *)pMICHDR);
 
             if (pDevice->bEnableHostWEP) {
                 pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
@@ -1989,13 +1964,13 @@ s_cbFillTxBufHead (
         if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
             if ((psEthHeader->wType == TYPE_PKT_IPX) ||
                 (psEthHeader->wType == cpu_to_le16(0xF380))) {
-                memcpy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
+                memcpy((unsigned char *) (pbyPayloadHead), &pDevice->abySNAP_Bridgetunnel[0], 6);
             }
             else {
-                memcpy((PBYTE) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
+                memcpy((unsigned char *) (pbyPayloadHead), &pDevice->abySNAP_RFC1042[0], 6);
             }
-            pbyType = (PBYTE) (pbyPayloadHead + 6);
-            memcpy(pbyType, &(psEthHeader->wType), sizeof(WORD));
+            pbyType = (unsigned char *) (pbyPayloadHead + 6);
+            memcpy(pbyType, &(psEthHeader->wType), sizeof(unsigned short));
             cb802_1_H_len = 8;
         }
 
@@ -2006,11 +1981,11 @@ s_cbFillTxBufHead (
         //Fill MICHDR
         //if (pDevice->bAES) {
         //    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Fill MICHDR...\n");
-        //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, pbyMacHdr, (WORD)cbFrameBodySize);
+        //    s_vFillMICHDR(pDevice, (unsigned char *)pMICHDR, pbyMacHdr, (unsigned short)cbFrameBodySize);
         //}
 
-        pbyBuffer = (PBYTE)pHeadTD->pTDInfo->buf;
-        //pbyBuffer = (PBYTE)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
+        pbyBuffer = (unsigned char *)pHeadTD->pTDInfo->buf;
+        //pbyBuffer = (unsigned char *)pDevice->aamTxBuf[uDMAIdx][uDescIdx].pbyVAddr;
 
         uLength = cbHeaderLength + cbMACHdLen + uPadding + cbIVlen + cb802_1_H_len;
 
@@ -2023,29 +1998,29 @@ s_cbFillTxBufHead (
                  cbFrameBodySize - cb802_1_H_len
                  );
 
-        if ((bNeedEncrypt == TRUE) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)){
+        if ((bNeedEncrypt == true) && (pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)){
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Length:%d, %d\n", cbFrameBodySize - cb802_1_H_len, uLength);
             /*
             for (ii = 0; ii < (cbFrameBodySize - cb802_1_H_len); ii++) {
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((PBYTE)((pbyBuffer + uLength) + ii)));
+                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *((unsigned char *)((pbyBuffer + uLength) + ii)));
             }
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
             */
 
             MIC_vAppend((pbyBuffer + uLength - cb802_1_H_len), cbFrameBodySize);
 
-            pdwMIC_L = (PDWORD)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize);
-            pdwMIC_R = (PDWORD)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize + 4);
+            pdwMIC_L = (unsigned long *)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize);
+            pdwMIC_R = (unsigned long *)(pbyBuffer + uLength - cb802_1_H_len + cbFrameBodySize + 4);
 
             MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
             MIC_vUnInit();
 
 
-            if (pDevice->bTxMICFail == TRUE) {
+            if (pDevice->bTxMICFail == true) {
                 *pdwMIC_L = 0;
                 *pdwMIC_R = 0;
-                pDevice->bTxMICFail = FALSE;
+                pDevice->bTxMICFail = false;
             }
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
@@ -2053,7 +2028,7 @@ s_cbFillTxBufHead (
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"MIC:%lx, %lx\n", *pdwMIC_L, *pdwMIC_R);
 /*
             for (ii = 0; ii < 8; ii++) {
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *(((PBYTE)(pdwMIC_L) + ii)));
+                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"%02x ", *(((unsigned char *)(pdwMIC_L) + ii)));
             }
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"\n");
 */
@@ -2064,7 +2039,7 @@ s_cbFillTxBufHead (
         if ((pDevice->byLocalID <= REV_ID_VT3253_A1)){
             if (bNeedEncrypt) {
                 s_vSWencryption(pDevice, pTransmitKey, (pbyBuffer + uLength - cb802_1_H_len),
-                                (WORD)(cbFrameBodySize + cbMIClen));
+                                (unsigned short)(cbFrameBodySize + cbMIClen));
                 cbReqCount += cbICVlen;
             }
         }
@@ -2078,7 +2053,7 @@ s_cbFillTxBufHead (
         ptdCurr->buff_addr = cpu_to_le32(ptdCurr->pTDInfo->skb_dma);
   	    //Set TSR1 & ReqCount in TxDescHead
         ptdCurr->m_td1TD1.byTCR |= (TCR_STP | TCR_EDP | EDMSDU);
-        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+        ptdCurr->m_td1TD1.wReqCount = cpu_to_le16((unsigned short)(cbReqCount));
 
         pDevice->iTDUsed[uDMAIdx]++;
 
@@ -2094,26 +2069,16 @@ s_cbFillTxBufHead (
 
 
 void
-vGenerateFIFOHeader (
-    PSDevice         pDevice,
-    BYTE             byPktType,
-    PBYTE            pbyTxBufferAddr,
-    BOOL             bNeedEncrypt,
-    UINT             cbPayloadSize,
-    UINT             uDMAIdx,
-    PSTxDesc         pHeadTD,
-    PSEthernetHeader psEthHeader,
-    PBYTE            pPacket,
-    PSKeyItem        pTransmitKey,
-    UINT             uNodeIndex,
-    PUINT            puMACfragNum,
-    PUINT            pcbHeaderSize
-    )
+vGenerateFIFOHeader(PSDevice pDevice, unsigned char byPktType, unsigned char *pbyTxBufferAddr,
+	bool bNeedEncrypt, unsigned int cbPayloadSize, unsigned int uDMAIdx,
+	PSTxDesc pHeadTD, PSEthernetHeader psEthHeader, unsigned char *pPacket,
+	PSKeyItem pTransmitKey, unsigned int uNodeIndex, unsigned int *puMACfragNum,
+	unsigned int *pcbHeaderSize)
 {
-    UINT            wTxBufSize;       // FFinfo size
-    BOOL            bNeedACK;
-    BOOL            bIsAdhoc;
-    WORD            cbMacHdLen;
+    unsigned int wTxBufSize;       // FFinfo size
+    bool bNeedACK;
+    bool bIsAdhoc;
+    unsigned short cbMacHdLen;
     PSTxBufHead     pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
 
     wTxBufSize = sizeof(STxBufHead);
@@ -2123,22 +2088,21 @@ vGenerateFIFOHeader (
 
     if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
         (pDevice->eOPMode == OP_MODE_AP)) {
-        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
-            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
-            bNeedACK = FALSE;
+        if (is_multicast_ether_addr(&(psEthHeader->abyDstAddr[0]))) {
+            bNeedACK = false;
             pTxBufHead->wFIFOCtl = pTxBufHead->wFIFOCtl & (~FIFOCTL_NEEDACK);
         }
         else {
-            bNeedACK = TRUE;
+            bNeedACK = true;
             pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
         }
-        bIsAdhoc = TRUE;
+        bIsAdhoc = true;
     }
     else {
         // MSDUs in Infra mode always need ACK
-        bNeedACK = TRUE;
+        bNeedACK = true;
         pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
-        bIsAdhoc = FALSE;
+        bIsAdhoc = false;
     }
 
 
@@ -2165,7 +2129,7 @@ vGenerateFIFOHeader (
     } else {
         cbMacHdLen = WLAN_HDR_ADDR3_LEN;
     }
-    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)(cbMacHdLen << 10));
+    pTxBufHead->wFragCtl |= cpu_to_le16((unsigned short)(cbMacHdLen << 10));
 
     //Set packet type
     if (byPktType == PK_TYPE_11A) {//0000 0000 0000 0000
@@ -2181,7 +2145,7 @@ vGenerateFIFOHeader (
         pTxBufHead->wFIFOCtl |= FIFOCTL_11GA;
     }
     //Set FIFOCTL_GrpAckPolicy
-    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+    if (pDevice->bGrpAckPolicy == true) {//0000 0100 0000 0000
         pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
     }
 
@@ -2195,7 +2159,7 @@ vGenerateFIFOHeader (
     }
 
     //Set FRAGCTL_WEPTYP
-    pDevice->bAES = FALSE;
+    pDevice->bAES = false;
 
     //Set FRAGCTL_WEPTYP
     if (pDevice->byLocalID > REV_ID_VT3253_A1) {
@@ -2267,13 +2231,13 @@ vGenerateFIFOHeader (
 void
 vGenerateMACHeader (
     PSDevice         pDevice,
-    PBYTE            pbyBufferAddr,
-    WORD             wDuration,
+    unsigned char *pbyBufferAddr,
+    unsigned short wDuration,
     PSEthernetHeader psEthHeader,
-    BOOL             bNeedEncrypt,
-    WORD             wFragType,
-    UINT             uDMAIdx,
-    UINT             uFragIdx
+    bool bNeedEncrypt,
+    unsigned short wFragType,
+    unsigned int uDMAIdx,
+    unsigned int uFragIdx
     )
 {
     PS802_11Header  pMACHeader = (PS802_11Header)pbyBufferAddr;
@@ -2307,7 +2271,7 @@ vGenerateMACHeader (
     }
 
     if (bNeedEncrypt)
-        pMACHeader->wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_ISWEP(1));
+        pMACHeader->wFrameCtl |= cpu_to_le16((unsigned short)WLAN_SET_FC_ISWEP(1));
 
     pMACHeader->wDurationID = cpu_to_le16(wDuration);
 
@@ -2319,7 +2283,7 @@ vGenerateMACHeader (
     pMACHeader->wSeqCtl = cpu_to_le16(pDevice->wSeqCounter << 4);
 
     //Set FragNumber in Sequence Control
-    pMACHeader->wSeqCtl |= cpu_to_le16((WORD)uFragIdx);
+    pMACHeader->wSeqCtl |= cpu_to_le16((unsigned short)uFragIdx);
 
     if ((wFragType == FRAGCTL_ENDFRAG) || (wFragType == FRAGCTL_NONFRAG)) {
         pDevice->wSeqCounter++;
@@ -2340,32 +2304,32 @@ vGenerateMACHeader (
 CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
 
     PSTxDesc        pFrstTD;
-    BYTE            byPktType;
-    PBYTE           pbyTxBufferAddr;
+    unsigned char byPktType;
+    unsigned char *pbyTxBufferAddr;
     void *          pvRTS;
     PSCTS           pCTS;
     void *          pvTxDataHd;
-    UINT            uDuration;
-    UINT            cbReqCount;
+    unsigned int uDuration;
+    unsigned int cbReqCount;
     PS802_11Header  pMACHeader;
-    UINT            cbHeaderSize;
-    UINT            cbFrameBodySize;
-    BOOL            bNeedACK;
-    BOOL            bIsPSPOLL = FALSE;
+    unsigned int cbHeaderSize;
+    unsigned int cbFrameBodySize;
+    bool bNeedACK;
+    bool bIsPSPOLL = false;
     PSTxBufHead     pTxBufHead;
-    UINT            cbFrameSize;
-    UINT            cbIVlen = 0;
-    UINT            cbICVlen = 0;
-    UINT            cbMIClen = 0;
-    UINT            cbFCSlen = 4;
-    UINT            uPadding = 0;
-    WORD            wTxBufSize;
-    UINT            cbMacHdLen;
+    unsigned int cbFrameSize;
+    unsigned int cbIVlen = 0;
+    unsigned int cbICVlen = 0;
+    unsigned int cbMIClen = 0;
+    unsigned int cbFCSlen = 4;
+    unsigned int uPadding = 0;
+    unsigned short wTxBufSize;
+    unsigned int cbMacHdLen;
     SEthernetHeader sEthHeader;
     void *          pvRrvTime;
     void *          pMICHDR;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    WORD            wCurrentRate = RATE_1M;
+    unsigned short wCurrentRate = RATE_1M;
 
 
     if (AVAIL_TD(pDevice, TYPE_TXDMA0) <= 0) {
@@ -2373,7 +2337,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     }
 
     pFrstTD = pDevice->apCurrTD[TYPE_TXDMA0];
-    pbyTxBufferAddr = (PBYTE)pFrstTD->pTDInfo->buf;
+    pbyTxBufferAddr = (unsigned char *)pFrstTD->pTDInfo->buf;
     cbFrameBodySize = pPacket->cbPayloadLen;
     pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
     wTxBufSize = sizeof(STxBufHead);
@@ -2424,12 +2388,10 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
 
 
-    if (IS_MULTICAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0])) ||
-        IS_BROADCAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0]))) {
-        bNeedACK = FALSE;
-    }
+    if (is_multicast_ether_addr(&(pPacket->p80211Header->sA3.abyAddr1[0])))
+        bNeedACK = false;
     else {
-        bNeedACK = TRUE;
+        bNeedACK = true;
         pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
     };
 
@@ -2441,7 +2403,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
         //pDevice->byPreambleType = PREAMBLE_LONG;
         // probe-response don't retry
         //if ((pPacket->p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_MGMT_PROBE_RSP) {
-        //     bNeedACK = FALSE;
+        //     bNeedACK = false;
         //     pTxBufHead->wFIFOCtl  &= (~FIFOCTL_NEEDACK);
         //}
     }
@@ -2449,19 +2411,19 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     pTxBufHead->wFIFOCtl |= (FIFOCTL_GENINT | FIFOCTL_ISDMA0);
 
     if ((pPacket->p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_CTL_PSPOLL) {
-        bIsPSPOLL = TRUE;
+        bIsPSPOLL = true;
         cbMacHdLen = WLAN_HDR_ADDR2_LEN;
     } else {
         cbMacHdLen = WLAN_HDR_ADDR3_LEN;
     }
 
     //Set FRAGCTL_MACHDCNT
-    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)(cbMacHdLen << 10));
+    pTxBufHead->wFragCtl |= cpu_to_le16((unsigned short)(cbMacHdLen << 10));
 
     // Notes:
     // Although spec says MMPDU can be fragmented; In most case,
     // no one will send a MMPDU under fragmentation. With RTS may occur.
-    pDevice->bAES = FALSE;  //Set FRAGCTL_WEPTYP
+    pDevice->bAES = false;  //Set FRAGCTL_WEPTYP
 
     if (WLAN_GET_FC_ISWEP(pPacket->p80211Header->sA4.wFrameCtl) != 0) {
         if (pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled) {
@@ -2482,7 +2444,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
             cbIVlen = 8;//RSN Header
             cbICVlen = 8;//MIC
             pTxBufHead->wFragCtl |= FRAGCTL_AES;
-            pDevice->bAES = TRUE;
+            pDevice->bAES = true;
         }
         //MAC Header should be padding 0 to DW alignment.
         uPadding = 4 - (cbMacHdLen%4);
@@ -2492,7 +2454,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     cbFrameSize = cbMacHdLen + cbFrameBodySize + cbIVlen + cbMIClen + cbICVlen + cbFCSlen;
 
     //Set FIFOCTL_GrpAckPolicy
-    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+    if (pDevice->bGrpAckPolicy == true) {//0000 0100 0000 0000
         pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
     }
     //the rest of pTxBufHead->wFragCtl:FragTyp will be set later in s_vFillFragParameter()
@@ -2523,7 +2485,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     //=========================
     //    No Fragmentation
     //=========================
-    pTxBufHead->wFragCtl |= (WORD)FRAGCTL_NONFRAG;
+    pTxBufHead->wFragCtl |= (unsigned short)FRAGCTL_NONFRAG;
 
 
     //Fill FIFO,RrvTime,RTS,and CTS
@@ -2539,17 +2501,17 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + cbFrameBodySize;
 
     if (WLAN_GET_FC_ISWEP(pPacket->p80211Header->sA4.wFrameCtl) != 0) {
-        PBYTE           pbyIVHead;
-        PBYTE           pbyPayloadHead;
-        PBYTE           pbyBSSID;
+        unsigned char *pbyIVHead;
+        unsigned char *pbyPayloadHead;
+        unsigned char *pbyBSSID;
         PSKeyItem       pTransmitKey = NULL;
 
-        pbyIVHead = (PBYTE)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding);
-        pbyPayloadHead = (PBYTE)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding + cbIVlen);
+        pbyIVHead = (unsigned char *)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding);
+        pbyPayloadHead = (unsigned char *)(pbyTxBufferAddr + cbHeaderSize + cbMacHdLen + uPadding + cbIVlen);
 
         //Fill TXKEY
         //Kyle: Need fix: TKIP and AES did't encryt Mnt Packet.
-        //s_vFillTxKey(pDevice, (PBYTE)pTxBufHead->adwTxKey, NULL);
+        //s_vFillTxKey(pDevice, (unsigned char *)pTxBufHead->adwTxKey, NULL);
 
         //Fill IV(ExtIV,RSNHDR)
         //s_vFillPrePayload(pDevice, pbyIVHead, NULL);
@@ -2558,16 +2520,16 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
         //---------------------------
         //Fill MICHDR
         //if (pDevice->bAES) {
-        //    s_vFillMICHDR(pDevice, (PBYTE)pMICHDR, (PBYTE)pMACHeader, (WORD)cbFrameBodySize);
+        //    s_vFillMICHDR(pDevice, (unsigned char *)pMICHDR, (unsigned char *)pMACHeader, (unsigned short)cbFrameBodySize);
         //}
         do {
             if ((pDevice->eOPMode == OP_MODE_INFRASTRUCTURE) &&
-                (pDevice->bLinkPass == TRUE)) {
+                (pDevice->bLinkPass == true)) {
                 pbyBSSID = pDevice->abyBSSID;
                 // get pairwise key
-                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == FALSE) {
+                if (KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, PAIRWISE_KEY, &pTransmitKey) == false) {
                     // get group key
-                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == TRUE) {
+                    if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == true) {
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get GTK.\n");
                         break;
                     }
@@ -2578,19 +2540,19 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
             }
             // get group key
             pbyBSSID = pDevice->abyBroadcastAddr;
-            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+            if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == false) {
                 pTransmitKey = NULL;
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"KEY is NULL. OP Mode[%d]\n", pDevice->eOPMode);
             } else {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Get GTK.\n");
             }
-        } while(FALSE);
+        } while(false);
         //Fill TXKEY
-        s_vFillTxKey(pDevice, (PBYTE)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
-                     (PBYTE)pMACHeader, (WORD)cbFrameBodySize, NULL);
+        s_vFillTxKey(pDevice, (unsigned char *)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+                     (unsigned char *)pMACHeader, (unsigned short)cbFrameBodySize, NULL);
 
         memcpy(pMACHeader, pPacket->p80211Header, cbMacHdLen);
-        memcpy(pbyPayloadHead, ((PBYTE)(pPacket->p80211Header) + cbMacHdLen),
+        memcpy(pbyPayloadHead, ((unsigned char *)(pPacket->p80211Header) + cbMacHdLen),
                  cbFrameBodySize);
     }
     else {
@@ -2622,7 +2584,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
     //Set TSR1 & ReqCount in TxDescHead
     pFrstTD->m_td1TD1.byTCR = (TCR_STP | TCR_EDP | EDMSDU);
     pFrstTD->pTDInfo->skb_dma = pFrstTD->pTDInfo->buf_dma;
-    pFrstTD->m_td1TD1.wReqCount = cpu_to_le16((WORD)(cbReqCount));
+    pFrstTD->m_td1TD1.wReqCount = cpu_to_le16((unsigned short)(cbReqCount));
     pFrstTD->buff_addr = cpu_to_le32(pFrstTD->pTDInfo->skb_dma);
     pFrstTD->pTDInfo->byFlags = 0;
 
@@ -2630,7 +2592,7 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
         // Disable PS
         MACbPSWakeup(pDevice->PortOffset);
     }
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
 
     wmb();
     pFrstTD->m_td0TD0.f1Owner = OWNED_BY_NIC;
@@ -2661,16 +2623,16 @@ CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
 
 CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
 
-    BYTE             byPktType;
-    PBYTE            pbyBuffer = (PBYTE)pDevice->tx_beacon_bufs;
-    UINT             cbFrameSize = pPacket->cbMPDULen + WLAN_FCS_LEN;
-    UINT             cbHeaderSize = 0;
-    WORD             wTxBufSize = sizeof(STxShortBufHead);
+    unsigned char byPktType;
+    unsigned char *pbyBuffer = (unsigned char *)pDevice->tx_beacon_bufs;
+    unsigned int cbFrameSize = pPacket->cbMPDULen + WLAN_FCS_LEN;
+    unsigned int cbHeaderSize = 0;
+    unsigned short wTxBufSize = sizeof(STxShortBufHead);
     PSTxShortBufHead pTxBufHead = (PSTxShortBufHead) pbyBuffer;
     PSTxDataHead_ab  pTxDataHead = (PSTxDataHead_ab) (pbyBuffer + wTxBufSize);
     PS802_11Header   pMACHeader;
-    WORD             wCurrentRate;
-    WORD             wLen = 0x0000;
+    unsigned short wCurrentRate;
+    unsigned short wLen = 0x0000;
 
 
     memset(pTxBufHead, 0, wTxBufSize);
@@ -2693,17 +2655,17 @@ CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
 
     //Set packet type & Get Duration
     if (byPktType == PK_TYPE_11A) {//0000 0000 0000 0000
-        pTxDataHead->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameSize, byPktType,
-                                                          wCurrentRate, FALSE, 0, 0, 1, AUTO_FB_NONE));
+        pTxDataHead->wDuration = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_A, cbFrameSize, byPktType,
+                                                          wCurrentRate, false, 0, 0, 1, AUTO_FB_NONE));
     }
     else if (byPktType == PK_TYPE_11B) {//0000 0001 0000 0000
         pTxBufHead->wFIFOCtl |= FIFOCTL_11B;
-        pTxDataHead->wDuration = cpu_to_le16((WORD)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameSize, byPktType,
-                                                          wCurrentRate, FALSE, 0, 0, 1, AUTO_FB_NONE));
+        pTxDataHead->wDuration = cpu_to_le16((unsigned short)s_uGetDataDuration(pDevice, DATADUR_B, cbFrameSize, byPktType,
+                                                          wCurrentRate, false, 0, 0, 1, AUTO_FB_NONE));
     }
 
     BBvCaculateParameter(pDevice, cbFrameSize, wCurrentRate, byPktType,
-        (PWORD)&(wLen), (PBYTE)&(pTxDataHead->byServiceField), (PBYTE)&(pTxDataHead->bySignalField)
+        (unsigned short *)&(wLen), (unsigned char *)&(pTxDataHead->byServiceField), (unsigned char *)&(pTxDataHead->bySignalField)
     );
     pTxDataHead->wTransmitLength = cpu_to_le16(wLen);
     //Get TimeStampOff
@@ -2736,41 +2698,38 @@ CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket) {
 
 
 
-UINT
+unsigned int
 cbGetFragCount (
     PSDevice         pDevice,
     PSKeyItem        pTransmitKey,
-    UINT             cbFrameBodySize,
+    unsigned int cbFrameBodySize,
     PSEthernetHeader psEthHeader
     )
 {
-    UINT           cbMACHdLen;
-    UINT           cbFrameSize;
-    UINT           cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
-    UINT           cbFragPayloadSize;
-    UINT           cbLastFragPayloadSize;
-    UINT           cbIVlen = 0;
-    UINT           cbICVlen = 0;
-    UINT           cbMIClen = 0;
-    UINT           cbFCSlen = 4;
-    UINT           uMACfragNum = 1;
-    BOOL           bNeedACK;
+    unsigned int cbMACHdLen;
+    unsigned int cbFrameSize;
+    unsigned int cbFragmentSize; //Hdr+(IV)+payoad+(MIC)+(ICV)+FCS
+    unsigned int cbFragPayloadSize;
+    unsigned int cbLastFragPayloadSize;
+    unsigned int cbIVlen = 0;
+    unsigned int cbICVlen = 0;
+    unsigned int cbMIClen = 0;
+    unsigned int cbFCSlen = 4;
+    unsigned int uMACfragNum = 1;
+    bool bNeedACK;
 
 
 
     if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
         (pDevice->eOPMode == OP_MODE_AP)) {
-        if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
-            IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
-            bNeedACK = FALSE;
-        }
-        else {
-            bNeedACK = TRUE;
-        }
+        if (is_multicast_ether_addr(&(psEthHeader->abyDstAddr[0])))
+            bNeedACK = false;
+        else
+            bNeedACK = true;
     }
     else {
         // MSDUs in Infra mode always need ACK
-        bNeedACK = TRUE;
+        bNeedACK = true;
     }
 
     if (pDevice->bLongHeader)
@@ -2779,7 +2738,7 @@ cbGetFragCount (
         cbMACHdLen = WLAN_HDR_ADDR3_LEN;
 
 
-    if (pDevice->bEncryptionEnable == TRUE) {
+    if (pDevice->bEncryptionEnable == true) {
 
         if (pTransmitKey == NULL) {
             if ((pDevice->eEncryptionStatus == Ndis802_11Encryption1Enabled) ||
@@ -2809,11 +2768,11 @@ cbGetFragCount (
 
     cbFrameSize = cbMACHdLen + cbIVlen + (cbFrameBodySize + cbMIClen) + cbICVlen + cbFCSlen;
 
-    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == TRUE)) {
+    if ((cbFrameSize > pDevice->wFragmentationThreshold) && (bNeedACK == true)) {
         // Fragmentation
         cbFragmentSize = pDevice->wFragmentationThreshold;
         cbFragPayloadSize = cbFragmentSize - cbMACHdLen - cbIVlen - cbICVlen - cbFCSlen;
-        uMACfragNum = (WORD) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
+        uMACfragNum = (unsigned short) ((cbFrameBodySize + cbMIClen) / cbFragPayloadSize);
         cbLastFragPayloadSize = (cbFrameBodySize + cbMIClen) % cbFragPayloadSize;
         if (cbLastFragPayloadSize == 0) {
             cbLastFragPayloadSize = cbFragPayloadSize;
@@ -2826,51 +2785,51 @@ cbGetFragCount (
 
 
 void
-vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDULen) {
+vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, unsigned char *pbMPDU, unsigned int cbMPDULen) {
 
     PSTxDesc        pFrstTD;
-    BYTE            byPktType;
-    PBYTE           pbyTxBufferAddr;
+    unsigned char byPktType;
+    unsigned char *pbyTxBufferAddr;
     void *          pvRTS;
     void *          pvCTS;
     void *          pvTxDataHd;
-    UINT            uDuration;
-    UINT            cbReqCount;
+    unsigned int uDuration;
+    unsigned int cbReqCount;
     PS802_11Header  pMACHeader;
-    UINT            cbHeaderSize;
-    UINT            cbFrameBodySize;
-    BOOL            bNeedACK;
-    BOOL            bIsPSPOLL = FALSE;
+    unsigned int cbHeaderSize;
+    unsigned int cbFrameBodySize;
+    bool bNeedACK;
+    bool bIsPSPOLL = false;
     PSTxBufHead     pTxBufHead;
-    UINT            cbFrameSize;
-    UINT            cbIVlen = 0;
-    UINT            cbICVlen = 0;
-    UINT            cbMIClen = 0;
-    UINT            cbFCSlen = 4;
-    UINT            uPadding = 0;
-    UINT            cbMICHDR = 0;
-    UINT            uLength = 0;
-    DWORD           dwMICKey0, dwMICKey1;
-    DWORD           dwMIC_Priority;
-    PDWORD          pdwMIC_L;
-    PDWORD          pdwMIC_R;
-    WORD            wTxBufSize;
-    UINT            cbMacHdLen;
+    unsigned int cbFrameSize;
+    unsigned int cbIVlen = 0;
+    unsigned int cbICVlen = 0;
+    unsigned int cbMIClen = 0;
+    unsigned int cbFCSlen = 4;
+    unsigned int uPadding = 0;
+    unsigned int cbMICHDR = 0;
+    unsigned int uLength = 0;
+    unsigned long dwMICKey0, dwMICKey1;
+    unsigned long dwMIC_Priority;
+    unsigned long *pdwMIC_L;
+    unsigned long *pdwMIC_R;
+    unsigned short wTxBufSize;
+    unsigned int cbMacHdLen;
     SEthernetHeader sEthHeader;
     void *          pvRrvTime;
     void *          pMICHDR;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    WORD            wCurrentRate = RATE_1M;
+    unsigned short wCurrentRate = RATE_1M;
     PUWLAN_80211HDR  p80211Header;
-    UINT             uNodeIndex = 0;
-    BOOL            bNodeExist = FALSE;
+    unsigned int uNodeIndex = 0;
+    bool bNodeExist = false;
     SKeyItem        STempKey;
     PSKeyItem       pTransmitKey = NULL;
-    PBYTE           pbyIVHead;
-    PBYTE           pbyPayloadHead;
-    PBYTE           pbyMacHdr;
+    unsigned char *pbyIVHead;
+    unsigned char *pbyPayloadHead;
+    unsigned char *pbyMacHdr;
 
-    UINT            cbExtSuppRate = 0;
+    unsigned int cbExtSuppRate = 0;
 //    PWLAN_IE        pItem;
 
 
@@ -2886,7 +2845,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
 
 
     pFrstTD = pDevice->apCurrTD[TYPE_TXDMA0];
-    pbyTxBufferAddr = (PBYTE)pFrstTD->pTDInfo->buf;
+    pbyTxBufferAddr = (unsigned char *)pFrstTD->pTDInfo->buf;
     pTxBufHead = (PSTxBufHead) pbyTxBufferAddr;
     wTxBufSize = sizeof(STxBufHead);
     memset(pTxBufHead, 0, wTxBufSize);
@@ -2938,20 +2897,19 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
     pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
 
 
-    if (IS_MULTICAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0])) ||
-        IS_BROADCAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0]))) {
-        bNeedACK = FALSE;
+    if (is_multicast_ether_addr(&(p80211Header->sA3.abyAddr1[0]))) {
+        bNeedACK = false;
         if (pDevice->bEnableHostWEP) {
             uNodeIndex = 0;
-            bNodeExist = TRUE;
+            bNodeExist = true;
         };
     }
     else {
         if (pDevice->bEnableHostWEP) {
-            if (BSSDBbIsSTAInNodeDB(pDevice->pMgmt, (PBYTE)(p80211Header->sA3.abyAddr1), &uNodeIndex))
-                bNodeExist = TRUE;
+            if (BSSDBbIsSTAInNodeDB(pDevice->pMgmt, (unsigned char *)(p80211Header->sA3.abyAddr1), &uNodeIndex))
+                bNodeExist = true;
         };
-        bNeedACK = TRUE;
+        bNeedACK = true;
         pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
     };
 
@@ -2964,7 +2922,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
 
         // probe-response don't retry
         //if ((p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_MGMT_PROBE_RSP) {
-        //     bNeedACK = FALSE;
+        //     bNeedACK = false;
         //     pTxBufHead->wFIFOCtl  &= (~FIFOCTL_NEEDACK);
         //}
     }
@@ -2972,7 +2930,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
     pTxBufHead->wFIFOCtl |= (FIFOCTL_GENINT | FIFOCTL_ISDMA0);
 
     if ((p80211Header->sA4.wFrameCtl & TYPE_SUBTYPE_MASK) == TYPE_CTL_PSPOLL) {
-        bIsPSPOLL = TRUE;
+        bIsPSPOLL = true;
         cbMacHdLen = WLAN_HDR_ADDR2_LEN;
     } else {
         cbMacHdLen = WLAN_HDR_ADDR3_LEN;
@@ -2996,12 +2954,12 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
 
 
     //Set FRAGCTL_MACHDCNT
-    pTxBufHead->wFragCtl |= cpu_to_le16((WORD)cbMacHdLen << 10);
+    pTxBufHead->wFragCtl |= cpu_to_le16((unsigned short)cbMacHdLen << 10);
 
     // Notes:
     // Although spec says MMPDU can be fragmented; In most case,
     // no one will send a MMPDU under fragmentation. With RTS may occur.
-    pDevice->bAES = FALSE;  //Set FRAGCTL_WEPTYP
+    pDevice->bAES = false;  //Set FRAGCTL_WEPTYP
 
 
     if (WLAN_GET_FC_ISWEP(p80211Header->sA4.wFrameCtl) != 0) {
@@ -3024,7 +2982,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
             cbICVlen = 8;//MIC
             cbMICHDR = sizeof(SMICHDRHead);
             pTxBufHead->wFragCtl |= FRAGCTL_AES;
-            pDevice->bAES = TRUE;
+            pDevice->bAES = true;
         }
         //MAC Header should be padding 0 to DW alignment.
         uPadding = 4 - (cbMacHdLen%4);
@@ -3034,7 +2992,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
     cbFrameSize = cbMacHdLen + cbFrameBodySize + cbIVlen + cbMIClen + cbICVlen + cbFCSlen + cbExtSuppRate;
 
     //Set FIFOCTL_GrpAckPolicy
-    if (pDevice->bGrpAckPolicy == TRUE) {//0000 0100 0000 0000
+    if (pDevice->bGrpAckPolicy == true) {//0000 0100 0000 0000
         pTxBufHead->wFIFOCtl |=	FIFOCTL_GRPACK;
     }
     //the rest of pTxBufHead->wFragCtl:FragTyp will be set later in s_vFillFragParameter()
@@ -3067,7 +3025,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
     //=========================
     //    No Fragmentation
     //=========================
-    pTxBufHead->wFragCtl |= (WORD)FRAGCTL_NONFRAG;
+    pTxBufHead->wFragCtl |= (unsigned short)FRAGCTL_NONFRAG;
 
 
     //Fill FIFO,RrvTime,RTS,and CTS
@@ -3082,9 +3040,9 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
 
     cbReqCount = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen + (cbFrameBodySize + cbMIClen) + cbExtSuppRate;
 
-    pbyMacHdr = (PBYTE)(pbyTxBufferAddr + cbHeaderSize);
-    pbyPayloadHead = (PBYTE)(pbyMacHdr + cbMacHdLen + uPadding + cbIVlen);
-    pbyIVHead = (PBYTE)(pbyMacHdr + cbMacHdLen + uPadding);
+    pbyMacHdr = (unsigned char *)(pbyTxBufferAddr + cbHeaderSize);
+    pbyPayloadHead = (unsigned char *)(pbyMacHdr + cbMacHdLen + uPadding + cbIVlen);
+    pbyIVHead = (unsigned char *)(pbyMacHdr + cbMacHdLen + uPadding);
 
     // Copy the Packet into a tx Buffer
     memcpy(pbyMacHdr, pbMPDU, cbMacHdLen);
@@ -3127,30 +3085,30 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
 
         if ((pTransmitKey != NULL) && (pTransmitKey->byCipherSuite == KEY_CTL_TKIP)) {
 
-            dwMICKey0 = *(PDWORD)(&pTransmitKey->abyKey[16]);
-            dwMICKey1 = *(PDWORD)(&pTransmitKey->abyKey[20]);
+            dwMICKey0 = *(unsigned long *)(&pTransmitKey->abyKey[16]);
+            dwMICKey1 = *(unsigned long *)(&pTransmitKey->abyKey[20]);
 
             // DO Software Michael
             MIC_vInit(dwMICKey0, dwMICKey1);
-            MIC_vAppend((PBYTE)&(sEthHeader.abyDstAddr[0]), 12);
+            MIC_vAppend((unsigned char *)&(sEthHeader.abyDstAddr[0]), 12);
             dwMIC_Priority = 0;
-            MIC_vAppend((PBYTE)&dwMIC_Priority, 4);
+            MIC_vAppend((unsigned char *)&dwMIC_Priority, 4);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"DMA0_tx_8021:MIC KEY: %lX, %lX\n", dwMICKey0, dwMICKey1);
 
             uLength = cbHeaderSize + cbMacHdLen + uPadding + cbIVlen;
 
             MIC_vAppend((pbyTxBufferAddr + uLength), cbFrameBodySize);
 
-            pdwMIC_L = (PDWORD)(pbyTxBufferAddr + uLength + cbFrameBodySize);
-            pdwMIC_R = (PDWORD)(pbyTxBufferAddr + uLength + cbFrameBodySize + 4);
+            pdwMIC_L = (unsigned long *)(pbyTxBufferAddr + uLength + cbFrameBodySize);
+            pdwMIC_R = (unsigned long *)(pbyTxBufferAddr + uLength + cbFrameBodySize + 4);
 
             MIC_vGetMIC(pdwMIC_L, pdwMIC_R);
             MIC_vUnInit();
 
-            if (pDevice->bTxMICFail == TRUE) {
+            if (pDevice->bTxMICFail == true) {
                 *pdwMIC_L = 0;
                 *pdwMIC_R = 0;
-                pDevice->bTxMICFail = FALSE;
+                pDevice->bTxMICFail = false;
             }
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"uLength: %d, %d\n", uLength, cbFrameBodySize);
@@ -3160,8 +3118,8 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
         }
 
 
-        s_vFillTxKey(pDevice, (PBYTE)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
-                     pbyMacHdr, (WORD)cbFrameBodySize, (PBYTE)pMICHDR);
+        s_vFillTxKey(pDevice, (unsigned char *)(pTxBufHead->adwTxKey), pbyIVHead, pTransmitKey,
+                     pbyMacHdr, (unsigned short)cbFrameBodySize, (unsigned char *)pMICHDR);
 
         if (pDevice->bEnableHostWEP) {
             pMgmt->sNodeDBTable[uNodeIndex].dwTSC47_16 = pTransmitKey->dwTSC47_16;
@@ -3169,7 +3127,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
         }
 
         if ((pDevice->byLocalID <= REV_ID_VT3253_A1)) {
-            s_vSWencryption(pDevice, pTransmitKey, pbyPayloadHead, (WORD)(cbFrameBodySize + cbMIClen));
+            s_vSWencryption(pDevice, pTransmitKey, pbyPayloadHead, (unsigned short)(cbFrameBodySize + cbMIClen));
         }
     }
 
@@ -3208,7 +3166,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDU
         // Disable PS
         MACbPSWakeup(pDevice->PortOffset);
     }
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
 
     wmb();
     pFrstTD->m_td0TD0.f1Owner = OWNED_BY_NIC;
diff --git a/drivers/staging/vt6655/rxtx.h b/drivers/staging/vt6655/rxtx.h
index b008fc23adb..fa827b828a3 100644
--- a/drivers/staging/vt6655/rxtx.h
+++ b/drivers/staging/vt6655/rxtx.h
@@ -40,67 +40,47 @@
 /*---------------------  Export Functions  --------------------------*/
 
 /*
-void vGenerateMACHeader(
-    PSDevice pDevice,
-    DWORD dwTxBufferAddr,
-    PBYTE pbySkbData,
-    UINT cbPacketSize,
-    BOOL bDMA0Used,
-    PUINT pcbHeadSize,
-    PUINT pcbAppendPayload
-     );
-
-void vProcessRxMACHeader (
-    PSDevice pDevice,
-    DWORD dwRxBufferAddr,
-    UINT cbPacketSize,
-    BOOL bIsWEP,
-    PUINT pcbHeadSize
-    );
+void
+vGenerateMACHeader(PSDevice pDevice, unsigned long dwTxBufferAddr, unsigned char *pbySkbData,
+	unsigned int cbPacketSize, bool bDMA0Used, unsigned int *pcbHeadSize,
+	unsigned int *pcbAppendPayload);
+
+void
+vProcessRxMACHeader(PSDevice pDevice, unsigned long dwRxBufferAddr, unsigned int cbPacketSize,
+	bool bIsWEP, unsigned int *pcbHeadSize);
 */
 
 
 void
 vGenerateMACHeader (
     PSDevice         pDevice,
-    PBYTE            pbyBufferAddr,
-    WORD             wDuration,
+    unsigned char *pbyBufferAddr,
+    unsigned short wDuration,
     PSEthernetHeader psEthHeader,
-    BOOL             bNeedEncrypt,
-    WORD             wFragType,
-    UINT             uDMAIdx,
-    UINT             uFragIdx
+    bool bNeedEncrypt,
+    unsigned short wFragType,
+    unsigned int uDMAIdx,
+    unsigned int uFragIdx
     );
 
 
-UINT
+unsigned int
 cbGetFragCount(
     PSDevice         pDevice,
     PSKeyItem        pTransmitKey,
-    UINT             cbFrameBodySize,
+    unsigned int	cbFrameBodySize,
     PSEthernetHeader psEthHeader
     );
 
 
 void
-vGenerateFIFOHeader (
-    PSDevice         pDevice,
-    BYTE             byPktTyp,
-    PBYTE            pbyTxBufferAddr,
-    BOOL             bNeedEncrypt,
-    UINT             cbPayloadSize,
-    UINT             uDMAIdx,
-    PSTxDesc         pHeadTD,
-    PSEthernetHeader psEthHeader,
-    PBYTE            pPacket,
-    PSKeyItem        pTransmitKey,
-    UINT             uNodeIndex,
-    PUINT            puMACfragNum,
-    PUINT            pcbHeaderSize
-    );
+vGenerateFIFOHeader(PSDevice pDevice, unsigned char byPktTyp, unsigned char *pbyTxBufferAddr,
+	bool bNeedEncrypt, unsigned int	cbPayloadSize, unsigned int uDMAIdx, PSTxDesc pHeadTD,
+	PSEthernetHeader psEthHeader, unsigned char *pPacket, PSKeyItem pTransmitKey,
+	unsigned int uNodeIndex, unsigned int *puMACfragNum, unsigned int *pcbHeaderSize);
 
 
-void vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, PBYTE pbMPDU, UINT cbMPDULen);
+void vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb, unsigned char *pbMPDU, unsigned int cbMPDULen);
 CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
 CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
 
diff --git a/drivers/staging/vt6655/srom.c b/drivers/staging/vt6655/srom.c
index 418575fdc2c..6a0a232d1a0 100644
--- a/drivers/staging/vt6655/srom.c
+++ b/drivers/staging/vt6655/srom.c
@@ -76,12 +76,12 @@
  * Return Value: data read
  *
  */
-BYTE SROMbyReadEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset)
+unsigned char SROMbyReadEmbedded(unsigned long dwIoBase, unsigned char byContntOffset)
 {
-    WORD    wDelay, wNoACK;
-    BYTE    byWait;
-    BYTE    byData;
-    BYTE    byOrg;
+    unsigned short wDelay, wNoACK;
+    unsigned char byWait;
+    unsigned char byData;
+    unsigned char byOrg;
 
     byData = 0xFF;
     VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
@@ -122,15 +122,15 @@ BYTE SROMbyReadEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset)
  *  Out:
  *      none
  *
- * Return Value: TRUE if succeeded; FALSE if failed.
+ * Return Value: true if succeeded; false if failed.
  *
  */
-BOOL SROMbWriteEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData)
+bool SROMbWriteEmbedded(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byData)
 {
-    WORD    wDelay, wNoACK;
-    BYTE    byWait;
+    unsigned short wDelay, wNoACK;
+    unsigned char byWait;
 
-    BYTE    byOrg;
+    unsigned char byOrg;
 
     VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
     /* turn off hardware retry for getting NACK */
@@ -157,10 +157,10 @@ BOOL SROMbWriteEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData)
     }
     if (wNoACK == W_MAX_I2CRETRY) {
         VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
-        return FALSE;
+        return false;
     }
     VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
-    return TRUE;
+    return true;
 }
 
 
@@ -178,12 +178,12 @@ BOOL SROMbWriteEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData)
  * Return Value: none
  *
  */
-void SROMvRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
+void SROMvRegBitsOn(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byBits)
 {
-    BYTE    byOrgData;
+    unsigned char byOrgData;
 
     byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
-    SROMbWriteEmbedded(dwIoBase, byContntOffset,(BYTE)(byOrgData | byBits));
+    SROMbWriteEmbedded(dwIoBase, byContntOffset,(unsigned char)(byOrgData | byBits));
 }
 
 
@@ -199,12 +199,12 @@ void SROMvRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
  *      none
  *
  */
-void SROMvRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
+void SROMvRegBitsOff(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byBits)
 {
-    BYTE    byOrgData;
+    unsigned char byOrgData;
 
     byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
-    SROMbWriteEmbedded(dwIoBase, byContntOffset,(BYTE)(byOrgData & (~byBits)));
+    SROMbWriteEmbedded(dwIoBase, byContntOffset,(unsigned char)(byOrgData & (~byBits)));
 }
 
 
@@ -219,12 +219,12 @@ void SROMvRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all test bits on; otherwise FALSE
+ * Return Value: true if all test bits on; otherwise false
  *
  */
-BOOL SROMbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
+bool SROMbIsRegBitsOn(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byTestBits)
 {
-    BYTE    byOrgData;
+    unsigned char byOrgData;
 
     byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
     return (byOrgData & byTestBits) == byTestBits;
@@ -242,12 +242,12 @@ BOOL SROMbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
  *  Out:
  *      none
  *
- * Return Value: TRUE if all test bits off; otherwise FALSE
+ * Return Value: true if all test bits off; otherwise false
  *
  */
-BOOL SROMbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
+bool SROMbIsRegBitsOff(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byTestBits)
 {
-    BYTE    byOrgData;
+    unsigned char byOrgData;
 
     byOrgData = SROMbyReadEmbedded(dwIoBase, byContntOffset);
     return !(byOrgData & byTestBits);
@@ -266,13 +266,13 @@ BOOL SROMbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits)
  * Return Value: none
  *
  */
-void SROMvReadAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
+void SROMvReadAllContents(unsigned long dwIoBase, unsigned char *pbyEepromRegs)
 {
     int     ii;
 
     /* ii = Rom Address */
     for (ii = 0; ii < EEP_MAX_CONTEXT_SIZE; ii++) {
-        *pbyEepromRegs = SROMbyReadEmbedded(dwIoBase,(BYTE) ii);
+        *pbyEepromRegs = SROMbyReadEmbedded(dwIoBase,(unsigned char) ii);
         pbyEepromRegs++;
     }
 }
@@ -291,13 +291,13 @@ void SROMvReadAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
  * Return Value: none
  *
  */
-void SROMvWriteAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
+void SROMvWriteAllContents(unsigned long dwIoBase, unsigned char *pbyEepromRegs)
 {
     int     ii;
 
     /* ii = Rom Address */
     for (ii = 0; ii < EEP_MAX_CONTEXT_SIZE; ii++) {
-        SROMbWriteEmbedded(dwIoBase,(BYTE) ii, *pbyEepromRegs);
+        SROMbWriteEmbedded(dwIoBase,(unsigned char) ii, *pbyEepromRegs);
         pbyEepromRegs++;
     }
 }
@@ -315,9 +315,9 @@ void SROMvWriteAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs)
  * Return Value: none
  *
  */
-void SROMvReadEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
+void SROMvReadEtherAddress(unsigned long dwIoBase, unsigned char *pbyEtherAddress)
 {
-    BYTE     ii;
+    unsigned char ii;
 
     /* ii = Rom Address */
     for (ii = 0; ii < ETH_ALEN; ii++) {
@@ -340,9 +340,9 @@ void SROMvReadEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
  * Return Value: none
  *
  */
-void SROMvWriteEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
+void SROMvWriteEtherAddress(unsigned long dwIoBase, unsigned char *pbyEtherAddress)
 {
-    BYTE     ii;
+    unsigned char ii;
 
     /* ii = Rom Address */
     for (ii = 0; ii < ETH_ALEN; ii++) {
@@ -364,11 +364,11 @@ void SROMvWriteEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress)
  * Return Value: none
  *
  */
-void SROMvReadSubSysVenId(DWORD_PTR dwIoBase, PDWORD pdwSubSysVenId)
+void SROMvReadSubSysVenId(unsigned long dwIoBase, unsigned long *pdwSubSysVenId)
 {
-    PBYTE   pbyData;
+    unsigned char *pbyData;
 
-    pbyData = (PBYTE)pdwSubSysVenId;
+    pbyData = (unsigned char *)pdwSubSysVenId;
     /* sub vendor */
     *pbyData = SROMbyReadEmbedded(dwIoBase, 6);
     *(pbyData+1) = SROMbyReadEmbedded(dwIoBase, 7);
@@ -386,15 +386,15 @@ void SROMvReadSubSysVenId(DWORD_PTR dwIoBase, PDWORD pdwSubSysVenId)
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL SROMbAutoLoad(DWORD_PTR dwIoBase)
+bool SROMbAutoLoad(unsigned long dwIoBase)
 {
-    BYTE    byWait;
+    unsigned char byWait;
     int     ii;
 
-    BYTE    byOrg;
+    unsigned char byOrg;
 
     VNSvInPortB(dwIoBase + MAC_REG_I2MCFG, &byOrg);
     /* turn on hardware retry */
@@ -413,8 +413,8 @@ BOOL SROMbAutoLoad(DWORD_PTR dwIoBase)
     VNSvOutPortB(dwIoBase + MAC_REG_I2MCFG, byOrg);
 
     if (ii == EEP_MAX_CONTEXT_SIZE)
-        return FALSE;
-    return TRUE;
+        return false;
+    return true;
 }
 
 
diff --git a/drivers/staging/vt6655/srom.h b/drivers/staging/vt6655/srom.h
index dbb3f5efe97..4c261dac01b 100644
--- a/drivers/staging/vt6655/srom.h
+++ b/drivers/staging/vt6655/srom.h
@@ -97,34 +97,34 @@
 //      2048 bits = 256 bytes = 128 words
 //
 typedef struct tagSSromReg {
-    BYTE    abyPAR[6];                  // 0x00 (WORD)
-
-    WORD    wSUB_VID;                   // 0x03 (WORD)
-    WORD    wSUB_SID;
-
-    BYTE    byBCFG0;                    // 0x05 (WORD)
-    BYTE    byBCFG1;
-
-    BYTE    byFCR0;                     // 0x06 (WORD)
-    BYTE    byFCR1;
-    BYTE    byPMC0;                     // 0x07 (WORD)
-    BYTE    byPMC1;
-    BYTE    byMAXLAT;                   // 0x08 (WORD)
-    BYTE    byMINGNT;
-    BYTE    byCFG0;                     // 0x09 (WORD)
-    BYTE    byCFG1;
-    WORD    wCISPTR;                    // 0x0A (WORD)
-    WORD    wRsv0;                      // 0x0B (WORD)
-    WORD    wRsv1;                      // 0x0C (WORD)
-    BYTE    byBBPAIR;                   // 0x0D (WORD)
-    BYTE    byRFTYPE;
-    BYTE    byMinChannel;               // 0x0E (WORD)
-    BYTE    byMaxChannel;
-    BYTE    bySignature;                // 0x0F (WORD)
-    BYTE    byCheckSum;
-
-    BYTE    abyReserved0[96];           // 0x10 (WORD)
-    BYTE    abyCIS[128];                // 0x80 (WORD)
+    unsigned char abyPAR[6];                  // 0x00 (unsigned short)
+
+    unsigned short wSUB_VID;                   // 0x03 (unsigned short)
+    unsigned short wSUB_SID;
+
+    unsigned char byBCFG0;                    // 0x05 (unsigned short)
+    unsigned char byBCFG1;
+
+    unsigned char byFCR0;                     // 0x06 (unsigned short)
+    unsigned char byFCR1;
+    unsigned char byPMC0;                     // 0x07 (unsigned short)
+    unsigned char byPMC1;
+    unsigned char byMAXLAT;                   // 0x08 (unsigned short)
+    unsigned char byMINGNT;
+    unsigned char byCFG0;                     // 0x09 (unsigned short)
+    unsigned char byCFG1;
+    unsigned short wCISPTR;                    // 0x0A (unsigned short)
+    unsigned short wRsv0;                      // 0x0B (unsigned short)
+    unsigned short wRsv1;                      // 0x0C (unsigned short)
+    unsigned char byBBPAIR;                   // 0x0D (unsigned short)
+    unsigned char byRFTYPE;
+    unsigned char byMinChannel;               // 0x0E (unsigned short)
+    unsigned char byMaxChannel;
+    unsigned char bySignature;                // 0x0F (unsigned short)
+    unsigned char byCheckSum;
+
+    unsigned char abyReserved0[96];           // 0x10 (unsigned short)
+    unsigned char abyCIS[128];                // 0x80 (unsigned short)
 } SSromReg, *PSSromReg;
 
 /*---------------------  Export Macros ------------------------------*/
@@ -135,23 +135,23 @@ typedef struct tagSSromReg {
 
 /*---------------------  Export Functions  --------------------------*/
 
-BYTE SROMbyReadEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset);
-BOOL SROMbWriteEmbedded(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byData);
+unsigned char SROMbyReadEmbedded(unsigned long dwIoBase, unsigned char byContntOffset);
+bool SROMbWriteEmbedded(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byData);
 
-void SROMvRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits);
-void SROMvRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byBits);
+void SROMvRegBitsOn(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byBits);
+void SROMvRegBitsOff(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byBits);
 
-BOOL SROMbIsRegBitsOn(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits);
-BOOL SROMbIsRegBitsOff(DWORD_PTR dwIoBase, BYTE byContntOffset, BYTE byTestBits);
+bool SROMbIsRegBitsOn(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byTestBits);
+bool SROMbIsRegBitsOff(unsigned long dwIoBase, unsigned char byContntOffset, unsigned char byTestBits);
 
-void SROMvReadAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs);
-void SROMvWriteAllContents(DWORD_PTR dwIoBase, PBYTE pbyEepromRegs);
+void SROMvReadAllContents(unsigned long dwIoBase, unsigned char *pbyEepromRegs);
+void SROMvWriteAllContents(unsigned long dwIoBase, unsigned char *pbyEepromRegs);
 
-void SROMvReadEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress);
-void SROMvWriteEtherAddress(DWORD_PTR dwIoBase, PBYTE pbyEtherAddress);
+void SROMvReadEtherAddress(unsigned long dwIoBase, unsigned char *pbyEtherAddress);
+void SROMvWriteEtherAddress(unsigned long dwIoBase, unsigned char *pbyEtherAddress);
 
-void SROMvReadSubSysVenId(DWORD_PTR dwIoBase, PDWORD pdwSubSysVenId);
+void SROMvReadSubSysVenId(unsigned long dwIoBase, unsigned long *pdwSubSysVenId);
 
-BOOL SROMbAutoLoad (DWORD_PTR dwIoBase);
+bool SROMbAutoLoad (unsigned long dwIoBase);
 
 #endif // __EEPROM_H__
diff --git a/drivers/staging/vt6655/tcrc.c b/drivers/staging/vt6655/tcrc.c
index 5f0c74763f8..f9c28bf8a6a 100644
--- a/drivers/staging/vt6655/tcrc.c
+++ b/drivers/staging/vt6655/tcrc.c
@@ -42,7 +42,7 @@
 /*---------------------  Static Variables  --------------------------*/
 
 // 32-bit CRC table
-static const DWORD s_adwCrc32Table[256] = {
+static const unsigned long s_adwCrc32Table[256] = {
     0x00000000L, 0x77073096L, 0xEE0E612CL, 0x990951BAL,
     0x076DC419L, 0x706AF48FL, 0xE963A535L, 0x9E6495A3L,
     0x0EDB8832L, 0x79DCB8A4L, 0xE0D5E91EL, 0x97D2D988L,
@@ -132,13 +132,13 @@ static const DWORD s_adwCrc32Table[256] = {
  * Return Value: CRC-32
  *
 -*/
-DWORD CRCdwCrc32 (PBYTE pbyData, UINT cbByte, DWORD dwCrcSeed)
+unsigned long CRCdwCrc32 (unsigned char *pbyData, unsigned int cbByte, unsigned long dwCrcSeed)
 {
-    DWORD dwCrc;
+    unsigned long dwCrc;
 
     dwCrc = dwCrcSeed;
     while (cbByte--) {
-        dwCrc = s_adwCrc32Table[(BYTE)((dwCrc ^ (*pbyData)) & 0xFF)] ^ (dwCrc >> 8);
+        dwCrc = s_adwCrc32Table[(unsigned char)((dwCrc ^ (*pbyData)) & 0xFF)] ^ (dwCrc >> 8);
         pbyData++;
     }
 
@@ -164,7 +164,7 @@ DWORD CRCdwCrc32 (PBYTE pbyData, UINT cbByte, DWORD dwCrcSeed)
  * Return Value: CRC-32
  *
 -*/
-DWORD CRCdwGetCrc32 (PBYTE pbyData, UINT cbByte)
+unsigned long CRCdwGetCrc32 (unsigned char *pbyData, unsigned int cbByte)
 {
     return ~CRCdwCrc32(pbyData, cbByte, 0xFFFFFFFFL);
 }
@@ -190,7 +190,7 @@ DWORD CRCdwGetCrc32 (PBYTE pbyData, UINT cbByte)
  * Return Value: CRC-32
  *
 -*/
-DWORD CRCdwGetCrc32Ex(PBYTE pbyData, UINT cbByte, DWORD dwPreCRC)
+unsigned long CRCdwGetCrc32Ex(unsigned char *pbyData, unsigned int cbByte, unsigned long dwPreCRC)
 {
     return CRCdwCrc32(pbyData, cbByte, dwPreCRC);
 }
diff --git a/drivers/staging/vt6655/tcrc.h b/drivers/staging/vt6655/tcrc.h
index 5faa48b0a74..d0449855beb 100644
--- a/drivers/staging/vt6655/tcrc.h
+++ b/drivers/staging/vt6655/tcrc.h
@@ -43,9 +43,9 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-DWORD CRCdwCrc32(PBYTE pbyData, UINT cbByte, DWORD dwCrcSeed);
-DWORD CRCdwGetCrc32(PBYTE pbyData, UINT cbByte);
-DWORD CRCdwGetCrc32Ex(PBYTE pbyData, UINT cbByte, DWORD dwPreCRC);
+unsigned long CRCdwCrc32(unsigned char *pbyData, unsigned int cbByte, unsigned long dwCrcSeed);
+unsigned long CRCdwGetCrc32(unsigned char *pbyData, unsigned int cbByte);
+unsigned long CRCdwGetCrc32Ex(unsigned char *pbyData, unsigned int cbByte, unsigned long dwPreCRC);
 
 #endif // __TCRC_H__
 
diff --git a/drivers/staging/vt6655/tether.c b/drivers/staging/vt6655/tether.c
index d8ba67395cb..1cf8508e407 100644
--- a/drivers/staging/vt6655/tether.c
+++ b/drivers/staging/vt6655/tether.c
@@ -61,14 +61,14 @@
  * Return Value: Hash value
  *
  */
-BYTE ETHbyGetHashIndexByCrc32 (PBYTE pbyMultiAddr)
+unsigned char ETHbyGetHashIndexByCrc32 (unsigned char *pbyMultiAddr)
 {
     int     ii;
-    BYTE    byTmpHash;
-    BYTE    byHash = 0;
+    unsigned char byTmpHash;
+    unsigned char byHash = 0;
 
     // get the least 6-bits from CRC generator
-    byTmpHash = (BYTE)(CRCdwCrc32(pbyMultiAddr, ETH_ALEN,
+    byTmpHash = (unsigned char)(CRCdwCrc32(pbyMultiAddr, ETH_ALEN,
             0xFFFFFFFFL) & 0x3F);
     // reverse most bit to least bit
     for (ii = 0; ii < (sizeof(byTmpHash) * 8); ii++) {
@@ -93,17 +93,17 @@ BYTE ETHbyGetHashIndexByCrc32 (PBYTE pbyMultiAddr)
  *  Out:
  *      none
  *
- * Return Value: TRUE if ok; FALSE if error.
+ * Return Value: true if ok; false if error.
  *
  */
-BOOL ETHbIsBufferCrc32Ok (PBYTE pbyBuffer, UINT cbFrameLength)
+bool ETHbIsBufferCrc32Ok (unsigned char *pbyBuffer, unsigned int cbFrameLength)
 {
-    DWORD dwCRC;
+    unsigned long dwCRC;
 
     dwCRC = CRCdwGetCrc32(pbyBuffer, cbFrameLength - 4);
-    if (cpu_to_le32(*((PDWORD)(pbyBuffer + cbFrameLength - 4))) != dwCRC) {
-        return FALSE;
+    if (cpu_to_le32(*((unsigned long *)(pbyBuffer + cbFrameLength - 4))) != dwCRC) {
+        return false;
     }
-    return TRUE;
+    return true;
 }
 
diff --git a/drivers/staging/vt6655/tether.h b/drivers/staging/vt6655/tether.h
index 3c9acd7903a..787d885deee 100644
--- a/drivers/staging/vt6655/tether.h
+++ b/drivers/staging/vt6655/tether.h
@@ -29,7 +29,7 @@
 #ifndef __TETHER_H__
 #define __TETHER_H__
 
-#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
 #include "ttype.h"
 
 /*---------------------  Export Definitions -------------------------*/
@@ -39,12 +39,6 @@
 #define U_ETHER_ADDR_STR_LEN (ETH_ALEN * 2 + 1)
                                         // Ethernet address string length
 
-#define MIN_DATA_LEN        46          // min data length
-
-#define MIN_PACKET_LEN      (MIN_DATA_LEN + ETH_HLEN)
-                                        // 60
-                                        // min total packet length (tx)
-
 #define MAX_LOOKAHEAD_SIZE  ETH_FRAME_LEN
 
 #define U_MULTI_ADDR_LEN    8           // multicast address length
@@ -160,9 +154,9 @@
 // Ethernet packet
 //
 typedef struct tagSEthernetHeader {
-    BYTE    abyDstAddr[ETH_ALEN];
-    BYTE    abySrcAddr[ETH_ALEN];
-    WORD    wType;
+    unsigned char abyDstAddr[ETH_ALEN];
+    unsigned char abySrcAddr[ETH_ALEN];
+    unsigned short wType;
 }__attribute__ ((__packed__))
 SEthernetHeader, *PSEthernetHeader;
 
@@ -171,9 +165,9 @@ SEthernetHeader, *PSEthernetHeader;
 // 802_3 packet
 //
 typedef struct tagS802_3Header {
-    BYTE    abyDstAddr[ETH_ALEN];
-    BYTE    abySrcAddr[ETH_ALEN];
-    WORD    wLen;
+    unsigned char abyDstAddr[ETH_ALEN];
+    unsigned char abySrcAddr[ETH_ALEN];
+    unsigned short wLen;
 }__attribute__ ((__packed__))
 S802_3Header, *PS802_3Header;
 
@@ -181,37 +175,17 @@ S802_3Header, *PS802_3Header;
 // 802_11 packet
 //
 typedef struct tagS802_11Header {
-    WORD    wFrameCtl;
-    WORD    wDurationID;
-    BYTE    abyAddr1[ETH_ALEN];
-    BYTE    abyAddr2[ETH_ALEN];
-    BYTE    abyAddr3[ETH_ALEN];
-    WORD    wSeqCtl;
-    BYTE    abyAddr4[ETH_ALEN];
+    unsigned short wFrameCtl;
+    unsigned short wDurationID;
+    unsigned char abyAddr1[ETH_ALEN];
+    unsigned char abyAddr2[ETH_ALEN];
+    unsigned char abyAddr3[ETH_ALEN];
+    unsigned short wSeqCtl;
+    unsigned char abyAddr4[ETH_ALEN];
 }__attribute__ ((__packed__))
 S802_11Header, *PS802_11Header;
 
 /*---------------------  Export Macros ------------------------------*/
-// Frame type macro
-
-#define IS_MULTICAST_ADDRESS(pbyEtherAddr)          \
-    ((*(PBYTE)(pbyEtherAddr) & 0x01) == 1)
-
-#define IS_BROADCAST_ADDRESS(pbyEtherAddr) (        \
-    (*(PDWORD)(pbyEtherAddr) == 0xFFFFFFFFL) &&     \
-    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0xFFFF) \
-)
-
-#define IS_NULL_ADDRESS(pbyEtherAddr) (             \
-    (*(PDWORD)(pbyEtherAddr) == 0L) &&              \
-    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0)      \
-)
-
-#define IS_ETH_ADDRESS_EQUAL(pbyAddr1, pbyAddr2) (  \
-    (*(PDWORD)(pbyAddr1) == *(PDWORD)(pbyAddr2)) && \
-    (*(PWORD)((PBYTE)(pbyAddr1) + 4) ==             \
-    *(PWORD)((PBYTE)(pbyAddr2) + 4))                \
-)
 
 /*---------------------  Export Classes  ----------------------------*/
 
@@ -219,9 +193,9 @@ S802_11Header, *PS802_11Header;
 
 /*---------------------  Export Functions  --------------------------*/
 
-BYTE ETHbyGetHashIndexByCrc32(PBYTE pbyMultiAddr);
-//BYTE ETHbyGetHashIndexByCrc(PBYTE pbyMultiAddr);
-BOOL ETHbIsBufferCrc32Ok(PBYTE pbyBuffer, UINT cbFrameLength);
+unsigned char ETHbyGetHashIndexByCrc32(unsigned char *pbyMultiAddr);
+//unsigned char ETHbyGetHashIndexByCrc(unsigned char *pbyMultiAddr);
+bool ETHbIsBufferCrc32Ok(unsigned char *pbyBuffer, unsigned int cbFrameLength);
 
 #endif // __TETHER_H__
 
diff --git a/drivers/staging/vt6655/tkip.c b/drivers/staging/vt6655/tkip.c
index f83af5913aa..ed3eac17ae8 100644
--- a/drivers/staging/vt6655/tkip.c
+++ b/drivers/staging/vt6655/tkip.c
@@ -55,7 +55,7 @@
 /* The 2nd table is the same as the 1st but with the upper and lower   */
 /* bytes swapped. To allow an endian tolerant implementation, the byte */
 /* halves have been expressed independently here.                      */
-const BYTE TKIP_Sbox_Lower[256] = {
+const unsigned char TKIP_Sbox_Lower[256] = {
     0xA5,0x84,0x99,0x8D,0x0D,0xBD,0xB1,0x54,
     0x50,0x03,0xA9,0x7D,0x19,0x62,0xE6,0x9A,
     0x45,0x9D,0x40,0x87,0x15,0xEB,0xC9,0x0B,
@@ -90,7 +90,7 @@ const BYTE TKIP_Sbox_Lower[256] = {
     0xC3,0xB0,0x77,0x11,0xCB,0xFC,0xD6,0x3A
 };
 
-const BYTE TKIP_Sbox_Upper[256] = {
+const unsigned char TKIP_Sbox_Upper[256] = {
     0xC6,0xF8,0xEE,0xF6,0xFF,0xD6,0xDE,0x91,
     0x60,0x02,0xCE,0x56,0xE7,0xB5,0x4D,0xEC,
     0x8F,0x1F,0x89,0xFA,0xEF,0xB2,0x8E,0xFB,
@@ -184,11 +184,11 @@ unsigned int rotr1(unsigned int a)
  *
  */
 void TKIPvMixKey(
-    PBYTE   pbyTKey,
-    PBYTE   pbyTA,
-    WORD    wTSC15_0,
-    DWORD   dwTSC47_16,
-    PBYTE   pbyRC4Key
+    unsigned char *pbyTKey,
+    unsigned char *pbyTA,
+    unsigned short wTSC15_0,
+    unsigned long dwTSC47_16,
+    unsigned char *pbyRC4Key
     )
 {
     unsigned int p1k[5];
diff --git a/drivers/staging/vt6655/tkip.h b/drivers/staging/vt6655/tkip.h
index 3dfa7f5ee7e..eb5951d726e 100644
--- a/drivers/staging/vt6655/tkip.h
+++ b/drivers/staging/vt6655/tkip.h
@@ -47,11 +47,11 @@
 /*---------------------  Export Functions  --------------------------*/
 
 void TKIPvMixKey(
-    PBYTE   pbyTKey,
-    PBYTE   pbyTA,
-    WORD    wTSC15_0,
-    DWORD   dwTSC47_16,
-    PBYTE   pbyRC4Key
+    unsigned char *pbyTKey,
+    unsigned char *pbyTA,
+    unsigned short wTSC15_0,
+    unsigned long dwTSC47_16,
+    unsigned char *pbyRC4Key
     );
 
 #endif // __TKIP_H__
diff --git a/drivers/staging/vt6655/tmacro.h b/drivers/staging/vt6655/tmacro.h
index e96c140de05..e8b177d4128 100644
--- a/drivers/staging/vt6655/tmacro.h
+++ b/drivers/staging/vt6655/tmacro.h
@@ -34,27 +34,27 @@
 /****** Common helper macros ***********************************************/
 
 #if !defined(LOBYTE)
-#define LOBYTE(w)           ((BYTE)(w))
+#define LOBYTE(w)           ((unsigned char)(w))
 #endif
 #if !defined(HIBYTE)
-#define HIBYTE(w)           ((BYTE)(((WORD)(w) >> 8) & 0xFF))
+#define HIBYTE(w)           ((unsigned char)(((unsigned short)(w) >> 8) & 0xFF))
 #endif
 
 #if !defined(LOWORD)
-#define LOWORD(d)           ((WORD)(d))
+#define LOWORD(d)           ((unsigned short)(d))
 #endif
 #if !defined(HIWORD)
-#define HIWORD(d)           ((WORD)((((DWORD)(d)) >> 16) & 0xFFFF))
+#define HIWORD(d)           ((unsigned short)((((unsigned long)(d)) >> 16) & 0xFFFF))
 #endif
 
 #define LODWORD(q)          ((q).u.dwLowDword)
 #define HIDWORD(q)          ((q).u.dwHighDword)
 
 #if !defined(MAKEWORD)
-#define MAKEWORD(lb, hb)    ((WORD)(((BYTE)(lb)) | (((WORD)((BYTE)(hb))) << 8)))
+#define MAKEWORD(lb, hb)    ((unsigned short)(((unsigned char)(lb)) | (((unsigned short)((unsigned char)(hb))) << 8)))
 #endif
 #if !defined(MAKEDWORD)
-#define MAKEDWORD(lw, hw)   ((DWORD)(((WORD)(lw)) | (((DWORD)((WORD)(hw))) << 16)))
+#define MAKEDWORD(lw, hw)   ((unsigned long)(((unsigned short)(lw)) | (((unsigned long)((unsigned short)(hw))) << 16)))
 #endif
 
 #endif // __TMACRO_H__
diff --git a/drivers/staging/vt6655/ttype.h b/drivers/staging/vt6655/ttype.h
index 2921083a9f2..37c8fba1fd1 100644
--- a/drivers/staging/vt6655/ttype.h
+++ b/drivers/staging/vt6655/ttype.h
@@ -33,23 +33,10 @@
 
 /******* Common definitions and typedefs ***********************************/
 
-#ifndef OUT
-#define OUT
-#endif
-
 #ifndef TxInSleep
 #define TxInSleep
 #endif
 
-typedef int             BOOL;
-
-#if !defined(TRUE)
-#define TRUE            1
-#endif
-#if !defined(FALSE)
-#define FALSE           0
-#endif
-
 //2007-0809-01<Add>by MikeLiu
 #ifndef  update_BssList
 #define update_BssList
@@ -65,10 +52,6 @@ typedef int             BOOL;
 #define Calcu_LinkQual
 #endif
 
-#ifndef Calcu_LinkQual
-#define Calcu_LinkQual
-#endif
-
 /****** Simple typedefs  ***************************************************/
 
 /* These lines assume that your compiler's longs are 32 bits and
@@ -76,37 +59,13 @@ typedef int             BOOL;
  * but it doesn't matter if they're signed or unsigned.
  */
 
-typedef signed char             I8;     /* 8-bit signed integer */
-
-typedef unsigned char           U8;     /* 8-bit unsigned integer */
-typedef unsigned short          U16;    /* 16-bit unsigned integer */
-typedef unsigned long           U32;    /* 32-bit unsigned integer */
-
-
-typedef char            CHAR;
-typedef signed short    SHORT;
-typedef signed int      INT;
-typedef signed long     LONG;
-
-typedef unsigned char   UCHAR;
-typedef unsigned short  USHORT;
-typedef unsigned int    UINT;
-typedef unsigned long   ULONG;
-typedef unsigned long long	ULONGLONG; //64 bit
-
-
-
-typedef unsigned char   BYTE;           //  8-bit
-typedef unsigned short  WORD;           // 16-bit
-typedef unsigned long   DWORD;          // 32-bit
-
 // QWORD is for those situation that we want
 // an 8-byte-aligned 8 byte long structure
 // which is NOT really a floating point number.
 typedef union tagUQuadWord {
     struct {
-        DWORD   dwLowDword;
-        DWORD   dwHighDword;
+        unsigned int dwLowDword;
+        unsigned int dwHighDword;
     } u;
     double      DoNotUseThisField;
 } UQuadWord;
@@ -114,18 +73,6 @@ typedef UQuadWord       QWORD;          // 64-bit
 
 /****** Common pointer types ***********************************************/
 
-typedef unsigned long   ULONG_PTR;      // 32-bit
-typedef unsigned long   DWORD_PTR;      // 32-bit
-
-// boolean pointer
-typedef unsigned int *   PUINT;
-
-typedef BYTE *           PBYTE;
-
-typedef WORD *           PWORD;
-
-typedef DWORD *          PDWORD;
-
 typedef QWORD *          PQWORD;
 
 #endif // __TTYPE_H__
diff --git a/drivers/staging/vt6655/upc.h b/drivers/staging/vt6655/upc.h
index acd1b661490..9596fdef0e3 100644
--- a/drivers/staging/vt6655/upc.h
+++ b/drivers/staging/vt6655/upc.h
@@ -76,36 +76,36 @@
 
 
 #define VNSvInPortB(dwIOAddress, pbyData) {                     \
-	volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress));            \
+	volatile unsigned char * pbyAddr = ((unsigned char *)(dwIOAddress));            \
 	*(pbyData) = readb(pbyAddr);                           \
 }
 
 
 #define VNSvInPortW(dwIOAddress, pwData) {                      \
-	volatile WORD* pwAddr = ((PWORD)(dwIOAddress));             \
+	volatile unsigned short *pwAddr = ((unsigned short *)(dwIOAddress));             \
 	*(pwData) = readw(pwAddr);                             \
 }
 
 #define VNSvInPortD(dwIOAddress, pdwData) {                     \
-	volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress));          \
+	volatile unsigned long *pdwAddr = ((unsigned long *)(dwIOAddress));          \
 	*(pdwData) = readl(pdwAddr);                           \
 }
 
 
 #define VNSvOutPortB(dwIOAddress, byData) {                     \
-    volatile BYTE* pbyAddr = ((PBYTE)(dwIOAddress));            \
-    writeb((BYTE)byData, pbyAddr);							\
+    volatile unsigned char * pbyAddr = ((unsigned char *)(dwIOAddress));            \
+    writeb((unsigned char)byData, pbyAddr);							\
 }
 
 
 #define VNSvOutPortW(dwIOAddress, wData) {                      \
-    volatile WORD* pwAddr = ((PWORD)(dwIOAddress));             \
-    writew((WORD)wData, pwAddr);							\
+    volatile unsigned short *pwAddr = ((unsigned short *)(dwIOAddress));             \
+    writew((unsigned short)wData, pwAddr);							\
 }
 
 #define VNSvOutPortD(dwIOAddress, dwData) {                     \
-    volatile DWORD* pdwAddr = ((PDWORD)(dwIOAddress));          \
-    writel((DWORD)dwData, pdwAddr);					    \
+    volatile unsigned long *pdwAddr = ((unsigned long *)(dwIOAddress));          \
+    writel((unsigned long)dwData, pdwAddr);					    \
 }
 
 #endif
@@ -140,8 +140,8 @@
 
 
 #define PCAvDelayByIO(uDelayUnit) {             \
-    BYTE    byData;                             \
-    ULONG   ii;                                 \
+    unsigned char byData;                       \
+    unsigned long ii;                           \
                                                 \
     if (uDelayUnit <= 50) {                     \
         udelay(uDelayUnit);                     \
diff --git a/drivers/staging/vt6655/vntwifi.c b/drivers/staging/vt6655/vntwifi.c
index b527a019188..fcf26ab920d 100644
--- a/drivers/staging/vt6655/vntwifi.c
+++ b/drivers/staging/vt6655/vntwifi.c
@@ -101,9 +101,9 @@ VNTWIFIvSetOPMode (
 void
 VNTWIFIvSetIBSSParameter (
     void *pMgmtHandle,
-    WORD  wBeaconPeriod,
-    WORD  wATIMWindow,
-    UINT  uChannel
+    unsigned short wBeaconPeriod,
+    unsigned short wATIMWindow,
+    unsigned int uChannel
     )
 {
     PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
@@ -150,7 +150,7 @@ VNTWIFIpGetCurrentSSID (
  * Return Value: current Channel.
  *
 -*/
-UINT
+unsigned int
 VNTWIFIpGetCurrentChannel (
     void *pMgmtHandle
     )
@@ -176,7 +176,7 @@ VNTWIFIpGetCurrentChannel (
  * Return Value: current Assoc ID
  *
 -*/
-WORD
+unsigned short
 VNTWIFIwGetAssocID (
     void *pMgmtHandle
     )
@@ -202,15 +202,15 @@ VNTWIFIwGetAssocID (
  * Return Value: max support rate
  *
 -*/
-BYTE
+unsigned char
 VNTWIFIbyGetMaxSupportRate (
     PWLAN_IE_SUPP_RATES pSupportRateIEs,
     PWLAN_IE_SUPP_RATES pExtSupportRateIEs
     )
 {
-    BYTE    byMaxSupportRate = RATE_1M;
-    BYTE    bySupportRate = RATE_1M;
-    UINT    ii = 0;
+    unsigned char byMaxSupportRate = RATE_1M;
+    unsigned char bySupportRate = RATE_1M;
+    unsigned int ii = 0;
 
     if (pSupportRateIEs) {
         for (ii = 0; ii < pSupportRateIEs->len; ii++) {
@@ -248,16 +248,16 @@ VNTWIFIbyGetMaxSupportRate (
  * Return Value: max support rate
  *
 -*/
-BYTE
+unsigned char
 VNTWIFIbyGetACKTxRate (
-    BYTE byRxDataRate,
+    unsigned char byRxDataRate,
     PWLAN_IE_SUPP_RATES pSupportRateIEs,
     PWLAN_IE_SUPP_RATES pExtSupportRateIEs
     )
 {
-    BYTE    byMaxAckRate;
-    BYTE    byBasicRate;
-    UINT    ii;
+    unsigned char byMaxAckRate;
+    unsigned char byBasicRate;
+    unsigned int ii;
 
     if (byRxDataRate <= RATE_11M) {
         byMaxAckRate = RATE_1M;
@@ -317,9 +317,9 @@ VNTWIFIvSetAuthenticationMode (
     pMgmt->eAuthenMode = eAuthMode;
     if ((eAuthMode == WMAC_AUTH_SHAREKEY) ||
         (eAuthMode == WMAC_AUTH_AUTO)) {
-        pMgmt->bShareKeyAlgorithm = TRUE;
+        pMgmt->bShareKeyAlgorithm = true;
     } else {
-        pMgmt->bShareKeyAlgorithm = FALSE;
+        pMgmt->bShareKeyAlgorithm = false;
     }
 }
 
@@ -350,15 +350,15 @@ VNTWIFIvSetEncryptionMode (
     if ((eEncryptionMode == WMAC_ENCRYPTION_WEPEnabled) ||
         (eEncryptionMode == WMAC_ENCRYPTION_TKIPEnabled) ||
         (eEncryptionMode == WMAC_ENCRYPTION_AESEnabled) ) {
-        pMgmt->bPrivacyInvoked = TRUE;
+        pMgmt->bPrivacyInvoked = true;
     } else {
-        pMgmt->bPrivacyInvoked = FALSE;
+        pMgmt->bPrivacyInvoked = false;
     }
 }
 
 
 
-BOOL
+bool
 VNTWIFIbConfigPhyMode (
     void *pMgmtHandle,
     CARD_PHY_TYPE ePhyType
@@ -368,14 +368,14 @@ VNTWIFIbConfigPhyMode (
 
     if ((ePhyType != PHY_TYPE_AUTO) &&
         (ePhyType != pMgmt->eCurrentPHYMode)) {
-        if (CARDbSetPhyParameter(pMgmt->pAdapter, ePhyType, 0, 0, NULL, NULL)==TRUE) {
+        if (CARDbSetPhyParameter(pMgmt->pAdapter, ePhyType, 0, 0, NULL, NULL)==true) {
             pMgmt->eCurrentPHYMode = ePhyType;
         } else {
-            return(FALSE);
+            return(false);
         }
     }
     pMgmt->eConfigPHYMode = ePhyType;
-    return(TRUE);
+    return(true);
 }
 
 
@@ -425,16 +425,12 @@ VNTWIFIbGetConfigPhyMode (
 -*/
 
 void
-VNTWIFIvQueryBSSList (
-    void *pMgmtHandle,
-    PUINT   puBSSCount,
-    void **pvFirstBSS
-    )
+VNTWIFIvQueryBSSList(void *pMgmtHandle, unsigned int *puBSSCount, void **pvFirstBSS)
 {
-    UINT            ii = 0;
+    unsigned int ii = 0;
     PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
     PKnownBSS       pBSS = NULL;
-    UINT            uCount = 0;
+    unsigned int uCount = 0;
 
     *pvFirstBSS = NULL;
 
@@ -471,7 +467,7 @@ VNTWIFIvGetNextBSS (
         if (pBSS > &(pMgmt->sBSSList[MAX_BSS_NUM])) {
             return;
         }
-        if (pBSS->bActive == TRUE) {
+        if (pBSS->bActive == true) {
             *pvNextBSS = pBSS;
             return;
         }
@@ -497,24 +493,24 @@ VNTWIFIvGetNextBSS (
 void
 VNTWIFIvUpdateNodeTxCounter(
     void *pMgmtHandle,
-    PBYTE    pbyDestAddress,
-    BOOL     bTxOk,
-    WORD     wRate,
-    PBYTE    pbyTxFailCount
+    unsigned char *pbyDestAddress,
+    bool bTxOk,
+    unsigned short wRate,
+    unsigned char *pbyTxFailCount
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
-    UINT            uNodeIndex = 0;
-    UINT            ii;
+    unsigned int uNodeIndex = 0;
+    unsigned int ii;
 
     if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) ||
         (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
-        if (BSSDBbIsSTAInNodeDB(pMgmt, pbyDestAddress, &uNodeIndex) == FALSE) {
+        if (BSSDBbIsSTAInNodeDB(pMgmt, pbyDestAddress, &uNodeIndex) == false) {
             return;
         }
     }
     pMgmt->sNodeDBTable[uNodeIndex].uTxAttempts++;
-    if (bTxOk == TRUE) {
+    if (bTxOk == true) {
         // transmit success, TxAttempts at least plus one
         pMgmt->sNodeDBTable[uNodeIndex].uTxOk[MAX_RATE]++;
         pMgmt->sNodeDBTable[uNodeIndex].uTxOk[wRate]++;
@@ -532,19 +528,19 @@ VNTWIFIvUpdateNodeTxCounter(
 void
 VNTWIFIvGetTxRate(
     void *pMgmtHandle,
-    PBYTE    pbyDestAddress,
-    PWORD   pwTxDataRate,
-    PBYTE   pbyACKRate,
-    PBYTE   pbyCCKBasicRate,
-    PBYTE   pbyOFDMBasicRate
+    unsigned char *pbyDestAddress,
+    unsigned short *pwTxDataRate,
+    unsigned char *pbyACKRate,
+    unsigned char *pbyCCKBasicRate,
+    unsigned char *pbyOFDMBasicRate
     )
 {
     PSMgmtObject        pMgmt = (PSMgmtObject)pMgmtHandle;
-    UINT                uNodeIndex = 0;
-    WORD                wTxDataRate = RATE_1M;
-    BYTE                byACKRate = RATE_1M;
-    BYTE                byCCKBasicRate = RATE_1M;
-    BYTE                byOFDMBasicRate = RATE_24M;
+    unsigned int uNodeIndex = 0;
+    unsigned short wTxDataRate = RATE_1M;
+    unsigned char byACKRate = RATE_1M;
+    unsigned char byCCKBasicRate = RATE_1M;
+    unsigned char byOFDMBasicRate = RATE_24M;
     PWLAN_IE_SUPP_RATES pSupportRateIEs = NULL;
     PWLAN_IE_SUPP_RATES pExtSupportRateIEs = NULL;
 
@@ -579,12 +575,12 @@ VNTWIFIvGetTxRate(
         pSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrSuppRates;
         pExtSupportRateIEs = (PWLAN_IE_SUPP_RATES) pMgmt->abyCurrExtSuppRates;
     }
-    byACKRate = VNTWIFIbyGetACKTxRate(  (BYTE) wTxDataRate,
+    byACKRate = VNTWIFIbyGetACKTxRate(  (unsigned char) wTxDataRate,
                                         pSupportRateIEs,
                                         pExtSupportRateIEs
                                         );
-    if (byACKRate > (BYTE) wTxDataRate) {
-        byACKRate = (BYTE) wTxDataRate;
+    if (byACKRate > (unsigned char) wTxDataRate) {
+        byACKRate = (unsigned char) wTxDataRate;
     }
     byCCKBasicRate = VNTWIFIbyGetACKTxRate( RATE_11M,
                                             pSupportRateIEs,
@@ -601,15 +597,15 @@ VNTWIFIvGetTxRate(
     return;
 }
 
-BYTE
+unsigned char
 VNTWIFIbyGetKeyCypher(
     void *pMgmtHandle,
-    BOOL     bGroupKey
+    bool bGroupKey
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject)pMgmtHandle;
 
-    if (bGroupKey == TRUE) {
+    if (bGroupKey == true) {
         return (pMgmt->byCSSGK);
     } else {
         return (pMgmt->byCSSPK);
@@ -618,7 +614,7 @@ VNTWIFIbyGetKeyCypher(
 
 
 /*
-BOOL
+bool
 VNTWIFIbInit(
     void *pAdapterHandler,
     void **pMgmtHandler
@@ -626,13 +622,13 @@ VNTWIFIbInit(
 {
 
     PSMgmtObject        pMgmt = NULL;
-    UINT                ii;
+    unsigned int ii;
 
 
     pMgmt = (PSMgmtObject)kmalloc(sizeof(SMgmtObject), (int)GFP_ATOMIC);
     if (pMgmt == NULL) {
         *pMgmtHandler = NULL;
-        return FALSE;
+        return false;
     }
 
     memset(pMgmt, 0, sizeof(SMgmtObject));
@@ -652,41 +648,41 @@ VNTWIFIbInit(
     pMgmt->uCmdDequeueIdx = 0;
     pMgmt->uCmdEnqueueIdx = 0;
     pMgmt->eCommandState = WLAN_CMD_STATE_IDLE;
-    pMgmt->bCmdStop = FALSE;
-    pMgmt->bCmdRunning = FALSE;
+    pMgmt->bCmdStop = false;
+    pMgmt->bCmdRunning = false;
 
     *pMgmtHandler = pMgmt;
-    return TRUE;
+    return true;
 }
 */
 
 
 
-BOOL
+bool
 VNTWIFIbSetPMKIDCache (
     void *pMgmtObject,
-    ULONG ulCount,
+    unsigned long ulCount,
     void *pPMKIDInfo
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
 
     if (ulCount > MAX_PMKID_CACHE) {
-        return (FALSE);
+        return (false);
     }
     pMgmt->gsPMKIDCache.BSSIDInfoCount = ulCount;
     memcpy(pMgmt->gsPMKIDCache.BSSIDInfo, pPMKIDInfo, (ulCount*sizeof(PMKIDInfo)));
-    return (TRUE);
+    return (true);
 }
 
 
 
-WORD
+unsigned short
 VNTWIFIwGetMaxSupportRate(
     void *pMgmtObject
     )
 {
-    WORD wRate = RATE_54M;
+    unsigned short wRate = RATE_54M;
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
 
     for(wRate = RATE_54M; wRate > RATE_1M; wRate--) {
@@ -705,7 +701,7 @@ VNTWIFIwGetMaxSupportRate(
 void
 VNTWIFIvSet11h (
     void *pMgmtObject,
-    BOOL  b11hEnable
+    bool b11hEnable
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
@@ -713,19 +709,19 @@ VNTWIFIvSet11h (
     pMgmt->b11hEnable = b11hEnable;
 }
 
-BOOL
+bool
 VNTWIFIbMeasureReport(
     void *pMgmtObject,
-    BOOL  bEndOfReport,
+    bool bEndOfReport,
     void *pvMeasureEID,
-    BYTE  byReportMode,
-    BYTE  byBasicMap,
-    BYTE  byCCAFraction,
-    PBYTE pbyRPIs
+    unsigned char byReportMode,
+    unsigned char byBasicMap,
+    unsigned char byCCAFraction,
+    unsigned char *pbyRPIs
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
-    PBYTE           pbyCurrentEID = (PBYTE) (pMgmt->pCurrMeasureEIDRep);
+    unsigned char *pbyCurrentEID = (unsigned char *) (pMgmt->pCurrMeasureEIDRep);
 
     //spin_lock_irq(&pDevice->lock);
     if ((pvMeasureEID != NULL) &&
@@ -765,49 +761,49 @@ VNTWIFIbMeasureReport(
         pMgmt->uLengthOfRepEIDs += (2 + pMgmt->pCurrMeasureEIDRep->len);
         pMgmt->pCurrMeasureEIDRep = (PWLAN_IE_MEASURE_REP) pbyCurrentEID;
     }
-    if (bEndOfReport == TRUE) {
+    if (bEndOfReport == true) {
         IEEE11hbMSRRepTx(pMgmt);
     }
     //spin_unlock_irq(&pDevice->lock);
-    return (TRUE);
+    return (true);
 }
 
 
-BOOL
+bool
 VNTWIFIbChannelSwitch(
     void *pMgmtObject,
-    BYTE  byNewChannel
+    unsigned char byNewChannel
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
 
     //spin_lock_irq(&pDevice->lock);
     pMgmt->uCurrChannel = byNewChannel;
-    pMgmt->bSwitchChannel = FALSE;
+    pMgmt->bSwitchChannel = false;
     //spin_unlock_irq(&pDevice->lock);
-    return TRUE;
+    return true;
 }
 
 /*
-BOOL
+bool
 VNTWIFIbRadarPresent(
     void *pMgmtObject,
-    BYTE  byChannel
+    unsigned char byChannel
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtObject;
     if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
-        (byChannel == (BYTE) pMgmt->uCurrChannel) &&
-        (pMgmt->bSwitchChannel != TRUE) &&
-        (pMgmt->b11hEnable == TRUE)) {
-        if (IS_ETH_ADDRESS_EQUAL(pMgmt->abyIBSSDFSOwner, CARDpGetCurrentAddress(pMgmt->pAdapter))) {
-            pMgmt->byNewChannel = CARDbyAutoChannelSelect(pMgmt->pAdapter,(BYTE) pMgmt->uCurrChannel);
-            pMgmt->bSwitchChannel = TRUE;
+        (byChannel == (unsigned char) pMgmt->uCurrChannel) &&
+        (pMgmt->bSwitchChannel != true) &&
+        (pMgmt->b11hEnable == true)) {
+        if (!compare_ether_addr(pMgmt->abyIBSSDFSOwner, CARDpGetCurrentAddress(pMgmt->pAdapter))) {
+            pMgmt->byNewChannel = CARDbyAutoChannelSelect(pMgmt->pAdapter,(unsigned char) pMgmt->uCurrChannel);
+            pMgmt->bSwitchChannel = true;
         }
         BEACONbSendBeacon(pMgmt);
         CARDbChannelSwitch(pMgmt->pAdapter, 0, pMgmt->byNewChannel, 10);
     }
-    return TRUE;
+    return true;
 }
 */
 
diff --git a/drivers/staging/vt6655/vntwifi.h b/drivers/staging/vt6655/vntwifi.h
index c91dfd79adc..f4327abaa77 100644
--- a/drivers/staging/vt6655/vntwifi.h
+++ b/drivers/staging/vt6655/vntwifi.h
@@ -143,9 +143,9 @@ typedef enum tagWMAC_POWER_MODE {
 void
 VNTWIFIvSetIBSSParameter (
     void *pMgmtHandle,
-    WORD  wBeaconPeriod,
-    WORD  wATIMWindow,
-    UINT  uChannel
+    unsigned short wBeaconPeriod,
+    unsigned short wATIMWindow,
+    unsigned int uChannel
     );
 
 void
@@ -159,25 +159,25 @@ VNTWIFIpGetCurrentSSID(
     void *pMgmtHandle
     );
 
-UINT
+unsigned int
 VNTWIFIpGetCurrentChannel(
     void *pMgmtHandle
     );
 
-WORD
+unsigned short
 VNTWIFIwGetAssocID (
     void *pMgmtHandle
     );
 
-BYTE
+unsigned char
 VNTWIFIbyGetMaxSupportRate (
     PWLAN_IE_SUPP_RATES pSupportRateIEs,
     PWLAN_IE_SUPP_RATES pExtSupportRateIEs
     );
 
-BYTE
+unsigned char
 VNTWIFIbyGetACKTxRate (
-    BYTE byRxDataRate,
+    unsigned char byRxDataRate,
     PWLAN_IE_SUPP_RATES pSupportRateIEs,
     PWLAN_IE_SUPP_RATES pExtSupportRateIEs
     );
@@ -195,7 +195,7 @@ VNTWIFIvSetEncryptionMode (
     );
 
 
-BOOL
+bool
 VNTWIFIbConfigPhyMode(
     void *pMgmtHandle,
     CARD_PHY_TYPE ePhyType
@@ -208,14 +208,8 @@ VNTWIFIbGetConfigPhyMode(
     );
 
 void
-VNTWIFIvQueryBSSList(
-    void *pMgmtHandle,
-    PUINT   puBSSCount,
-    void **pvFirstBSS
-    );
-
-
-
+VNTWIFIvQueryBSSList(void *pMgmtHandle, unsigned int *puBSSCount,
+		void **pvFirstBSS);
 
 void
 VNTWIFIvGetNextBSS (
@@ -229,52 +223,52 @@ VNTWIFIvGetNextBSS (
 void
 VNTWIFIvUpdateNodeTxCounter(
     void *pMgmtHandle,
-    PBYTE    pbyDestAddress,
-    BOOL     bTxOk,
-    WORD     wRate,
-    PBYTE    pbyTxFailCount
+    unsigned char *pbyDestAddress,
+    bool bTxOk,
+    unsigned short wRate,
+    unsigned char *pbyTxFailCount
     );
 
 
 void
 VNTWIFIvGetTxRate(
     void *pMgmtHandle,
-    PBYTE    pbyDestAddress,
-    PWORD   pwTxDataRate,
-    PBYTE   pbyACKRate,
-    PBYTE   pbyCCKBasicRate,
-    PBYTE   pbyOFDMBasicRate
+    unsigned char *pbyDestAddress,
+    unsigned short *pwTxDataRate,
+    unsigned char *pbyACKRate,
+    unsigned char *pbyCCKBasicRate,
+    unsigned char *pbyOFDMBasicRate
     );
 /*
-BOOL
+bool
 VNTWIFIbInit(
     void *pAdapterHandler,
     void **pMgmtHandler
     );
 */
 
-BYTE
+unsigned char
 VNTWIFIbyGetKeyCypher(
     void *pMgmtHandle,
-    BOOL     bGroupKey
+    bool bGroupKey
     );
 
 
 
 
-BOOL
+bool
 VNTWIFIbSetPMKIDCache (
     void *pMgmtObject,
-    ULONG ulCount,
+    unsigned long ulCount,
     void *pPMKIDInfo
     );
 
-BOOL
+bool
 VNTWIFIbCommandRunning (
     void *pMgmtObject
     );
 
-WORD
+unsigned short
 VNTWIFIwGetMaxSupportRate(
     void *pMgmtObject
     );
@@ -283,30 +277,30 @@ VNTWIFIwGetMaxSupportRate(
 void
 VNTWIFIvSet11h (
     void *pMgmtObject,
-    BOOL  b11hEnable
+    bool b11hEnable
     );
 
-BOOL
+bool
 VNTWIFIbMeasureReport(
     void *pMgmtObject,
-    BOOL  bEndOfReport,
+    bool bEndOfReport,
     void *pvMeasureEID,
-    BYTE  byReportMode,
-    BYTE  byBasicMap,
-    BYTE  byCCAFraction,
-    PBYTE pbyRPIs
+    unsigned char byReportMode,
+    unsigned char byBasicMap,
+    unsigned char byCCAFraction,
+    unsigned char *pbyRPIs
     );
 
-BOOL
+bool
 VNTWIFIbChannelSwitch(
     void *pMgmtObject,
-    BYTE  byNewChannel
+    unsigned char byNewChannel
     );
 /*
-BOOL
+bool
 VNTWIFIbRadarPresent(
     void *pMgmtObject,
-    BYTE  byChannel
+    unsigned char byChannel
     );
 */
 
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index 28665d870f5..abd6745bc3f 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -52,6 +52,7 @@
 #include "rxtx.h"
 #include "rf.h"
 #include "iowpa.h"
+#include "channel.h"
 
 /*---------------------  Static Definitions -------------------------*/
 
@@ -77,7 +78,7 @@ PSTxMgmtPacket
 s_MgrMakeProbeRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pScanBSSID,
+    unsigned char *pScanBSSID,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -85,7 +86,7 @@ s_MgrMakeProbeRequest(
 
 
 static
-BOOL
+bool
 s_bCommandComplete (
     PSDevice pDevice
     );
@@ -116,7 +117,7 @@ vAdHocBeaconStop(PSDevice  pDevice)
 {
 
     PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
-    BOOL            bStop;
+    bool bStop;
 
     /*
      * temporarily stop Beacon packet for AdHoc Server
@@ -129,18 +130,18 @@ vAdHocBeaconStop(PSDevice  pDevice)
      *      or
      *      (3.2) AdHoc channel is in A mode
      */
-    bStop = FALSE;
+    bStop = false;
     if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
     (pMgmt->eCurrState >= WMAC_STATE_STARTED))
     {
         if ((pMgmt->uIBSSChannel <=  CB_MAX_CHANNEL_24G) &&
              (pMgmt->uScanChannel > CB_MAX_CHANNEL_24G))
         {
-            bStop = TRUE;
+            bStop = true;
         }
         if (pMgmt->uIBSSChannel >  CB_MAX_CHANNEL_24G)
         {
-            bStop = TRUE;
+            bStop = true;
         }
     }
 
@@ -208,15 +209,15 @@ s_vProbeChannel(
     )
 {
                                                      //1M,   2M,   5M,   11M,  18M,  24M,  36M,  54M
-    BYTE abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
-    BYTE abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+    unsigned char abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+    unsigned char abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
                                                            //6M,   9M,   12M,  48M
-    BYTE abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
-    BYTE abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
-    PBYTE           pbyRate;
+    unsigned char abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    unsigned char abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+    unsigned char *pbyRate;
     PSTxMgmtPacket  pTxPacket;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
-    UINT            ii;
+    unsigned int ii;
 
 
     if (pDevice->eCurrentPHYType == PHY_TYPE_11A) {
@@ -269,7 +270,7 @@ PSTxMgmtPacket
 s_MgrMakeProbeRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pScanBSSID,
+    unsigned char *pScanBSSID,
     PWLAN_IE_SSID pSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -282,8 +283,8 @@ s_MgrMakeProbeRequest(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_PROBEREQ_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_PROBEREQ_FR_MAXLEN;
     vMgrEncodeProbeRequest(&sFrame);
     sFrame.pHdr->sA3.wFrameCtl = cpu_to_le16(
@@ -320,16 +321,16 @@ s_MgrMakeProbeRequest(
 void
 vCommandTimerWait(
     void *hDeviceContext,
-    UINT MSecond
+    unsigned int MSecond
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
 
     init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.data = (unsigned long) pDevice;
     pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
     // RUN_AT :1 msec ~= (HZ/1024)
-    pDevice->sTimerCommand.expires = (UINT)RUN_AT((MSecond * HZ) >> 10);
+    pDevice->sTimerCommand.expires = (unsigned int)RUN_AT((MSecond * HZ) >> 10);
     add_timer(&pDevice->sTimerCommand);
     return;
 }
@@ -347,14 +348,14 @@ vCommandTimer (
     PWLAN_IE_SSID   pItemSSID;
     PWLAN_IE_SSID   pItemSSIDCurr;
     CMD_STATUS      Status;
-    UINT            ii;
-    BYTE            byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    unsigned int ii;
+    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
     struct sk_buff  *skb;
 
 
     if (pDevice->dwDiagRefCount != 0)
         return;
-    if (pDevice->bCmdRunning != TRUE)
+    if (pDevice->bCmdRunning != true)
         return;
 
     spin_lock_irq(&pDevice->lock);
@@ -364,7 +365,7 @@ vCommandTimer (
         case WLAN_CMD_SCAN_START:
 
 	pDevice->byReAssocCount = 0;
-            if (pDevice->bRadioOff == TRUE) {
+            if (pDevice->bRadioOff == true) {
                 s_bCommandComplete(pDevice);
                 spin_unlock_irq(&pDevice->lock);
                 return;
@@ -396,7 +397,7 @@ vCommandTimer (
 
                 // Set Baseband's sensitivity back.
                 // Set channel back
-                CARDbSetChannel(pMgmt->pAdapter, pMgmt->uCurrChannel);
+                set_channel(pMgmt->pAdapter, pMgmt->uCurrChannel);
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Scanning, set back to channel: [%d]\n", pMgmt->uCurrChannel);
                 if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
                     CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_ADHOC);
@@ -408,7 +409,7 @@ vCommandTimer (
 
             } else {
 //2008-8-4 <add> by chester
-                 if (!ChannelValid(pDevice->byZoneType, pMgmt->uScanChannel)) {
+		if (!is_channel_valid(pMgmt->uScanChannel)) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Invalid channel pMgmt->uScanChannel = %d \n",pMgmt->uScanChannel);
                     s_bCommandComplete(pDevice);
                     return;
@@ -431,7 +432,7 @@ vCommandTimer (
 
                 vAdHocBeaconStop(pDevice);
 
-                if (CARDbSetChannel(pMgmt->pAdapter, pMgmt->uScanChannel) == TRUE) {
+                if (set_channel(pMgmt->pAdapter, pMgmt->uScanChannel) == true) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SCAN Channel: %d\n", pMgmt->uScanChannel);
                 } else {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"SET SCAN Channel Fail: %d\n", pMgmt->uScanChannel);
@@ -441,7 +442,7 @@ vCommandTimer (
       //          printk("chester-ch=%d\n",pMgmt->uScanChannel);
 	pMgmt->uScanChannel++;
 //2008-8-4 <modify> by chester
-	 if (!ChannelValid(pDevice->byZoneType, pMgmt->uScanChannel) &&
+		if (!is_channel_valid(pMgmt->uScanChannel) &&
                         pMgmt->uScanChannel <= pDevice->byMaxChannel ){
                     pMgmt->uScanChannel=pDevice->byMaxChannel+1;
 		 pMgmt->eCommandState = WLAN_CMD_SCAN_END;
@@ -449,7 +450,7 @@ vCommandTimer (
                 }
 
 
-                if ((pMgmt->b11hEnable == FALSE) ||
+                if ((pMgmt->b11hEnable == false) ||
                     (pMgmt->uScanChannel < CB_MAX_CHANNEL_24G)) {
                     s_vProbeChannel(pDevice);
                     spin_unlock_irq(&pDevice->lock);
@@ -469,7 +470,7 @@ vCommandTimer (
 
             // Set Baseband's sensitivity back.
             // Set channel back
-            CARDbSetChannel(pMgmt->pAdapter, pMgmt->uCurrChannel);
+            set_channel(pMgmt->pAdapter, pMgmt->uCurrChannel);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Scanning, set back to channel: [%d]\n", pMgmt->uCurrChannel);
             if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
                 CARDbSetBSSID(pMgmt->pAdapter, pMgmt->abyCurrBSSID, OP_MODE_ADHOC);
@@ -502,14 +503,14 @@ vCommandTimer (
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Send Disassociation Packet..\n");
                 // reason = 8 : disassoc because sta has left
                 vMgrDisassocBeginSta((void *)pDevice, pMgmt, pMgmt->abyCurrBSSID, (8), &Status);
-                pDevice->bLinkPass = FALSE;
+                pDevice->bLinkPass = false;
                 // unlock command busy
                 pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
                 pItemSSID->len = 0;
                 memset(pItemSSID->abySSID, 0, WLAN_SSID_MAXLEN);
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
-                pMgmt->sNodeDBTable[0].bActive = FALSE;
-//                pDevice->bBeaconBufReady = FALSE;
+                pMgmt->sNodeDBTable[0].bActive = false;
+//                pDevice->bBeaconBufReady = false;
             }
             netif_stop_queue(pDevice->dev);
             pDevice->eCommandState = WLAN_DISASSOCIATE_WAIT;
@@ -539,7 +540,7 @@ vCommandTimer (
 
         case WLAN_CMD_SSID_START:
         	pDevice->byReAssocCount = 0;
-            if (pDevice->bRadioOff == TRUE) {
+            if (pDevice->bRadioOff == true) {
                 s_bCommandComplete(pDevice);
                 spin_unlock_irq(&pDevice->lock);
                 return;
@@ -573,7 +574,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                 }
 
                 netif_stop_queue(pDevice->dev);
-                pDevice->bLinkPass = FALSE;
+                pDevice->bLinkPass = false;
             }
             // set initial state
             pMgmt->eCurrState = WMAC_STATE_IDLE;
@@ -607,9 +608,9 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                     if (netif_queue_stopped(pDevice->dev)){
                         netif_wake_queue(pDevice->dev);
                     }
-                    pDevice->bLinkPass = TRUE;
+                    pDevice->bLinkPass = true;
 
-                    pMgmt->sNodeDBTable[0].bActive = TRUE;
+                    pMgmt->sNodeDBTable[0].bActive = true;
                     pMgmt->sNodeDBTable[0].uInActiveCount = 0;
                     bClearBSSID_SCAN(pDevice);
                 }
@@ -635,12 +636,12 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                     if (netif_queue_stopped(pDevice->dev)){
                         netif_wake_queue(pDevice->dev);
                     }
-                    pDevice->bLinkPass = TRUE;
+                    pDevice->bLinkPass = true;
                 }
                 else {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Disconnect SSID none\n");
 		  #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                    // if(pDevice->bWPASuppWextEnabled == true)
                         {
                   	union iwreq_data  wrqu;
                   	memset(&wrqu, 0, sizeof (wrqu));
@@ -685,7 +686,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
 	          pDevice->byLinkWaitCount = 0;
 		 #if 0
                      #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                    // if(pDevice->bWPASuppWextEnabled == true)
                         {
                   	union iwreq_data  wrqu;
                   	memset(&wrqu, 0, sizeof (wrqu));
@@ -707,7 +708,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                 if (pMgmt->eAuthenMode >= WMAC_AUTH_WPA) {
                     KeybRemoveAllKey(&(pDevice->sKey), pDevice->abyBSSID, pDevice->PortOffset);
                 }
-                pDevice->bLinkPass = TRUE;
+                pDevice->bLinkPass = true;
                 pDevice->byLinkWaitCount = 0;
                 pDevice->byReAssocCount = 0;
                 bClearBSSID_SCAN(pDevice);
@@ -719,20 +720,20 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                     netif_wake_queue(pDevice->dev);
                 }
 	     #ifdef TxInSleep
-		 if(pDevice->IsTxDataTrigger != FALSE)   {    //TxDataTimer is not triggered at the first time
+		 if(pDevice->IsTxDataTrigger != false)   {    //TxDataTimer is not triggered at the first time
                      // printk("Re-initial TxDataTimer****\n");
 		    del_timer(&pDevice->sTimerTxData);
                       init_timer(&pDevice->sTimerTxData);
-                      pDevice->sTimerTxData.data = (ULONG)pDevice;
+                      pDevice->sTimerTxData.data = (unsigned long) pDevice;
                       pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
                       pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
-                      pDevice->fTxDataInSleep = FALSE;
+                      pDevice->fTxDataInSleep = false;
                       pDevice->nTxDataTimeCout = 0;
 		 }
 		 else {
 		   // printk("mike:-->First time triger TimerTxData InSleep\n");
 		 }
-		pDevice->IsTxDataTrigger = TRUE;
+		pDevice->IsTxDataTrigger = true;
                 add_timer(&pDevice->sTimerTxData);
              #endif
             }
@@ -749,7 +750,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
 	          pDevice->byLinkWaitCount = 0;
 		#if 0
                      #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
+                    // if(pDevice->bWPASuppWextEnabled == true)
                         {
                   	union iwreq_data  wrqu;
                   	memset(&wrqu, 0, sizeof (wrqu));
@@ -770,14 +771,14 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                 del_timer(&pMgmt->sTimerSecondCallback);
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
                 pMgmt->eCurrMode = WMAC_MODE_STANDBY;
-                pDevice->bLinkPass = FALSE;
-                if (pDevice->bEnableHostWEP == TRUE)
+                pDevice->bLinkPass = false;
+                if (pDevice->bEnableHostWEP == true)
                     BSSvClearNodeDBTable(pDevice, 1);
                 else
                     BSSvClearNodeDBTable(pDevice, 0);
                 pDevice->uAssocCount = 0;
                 pMgmt->eCurrState = WMAC_STATE_IDLE;
-                pDevice->bFixRate = FALSE;
+                pDevice->bFixRate = false;
 
                 vMgrCreateOwnIBSS((void *)pDevice, &Status);
                 if (Status != CMD_STATUS_SUCCESS){
@@ -791,7 +792,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                 if (netif_queue_stopped(pDevice->dev)){
                     netif_wake_queue(pDevice->dev);
                 }
-                pDevice->bLinkPass = TRUE;
+                pDevice->bLinkPass = true;
                 add_timer(&pMgmt->sTimerSecondCallback);
             }
             s_bCommandComplete(pDevice);
@@ -803,10 +804,10 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                 while ((skb = skb_dequeue(&pMgmt->sNodeDBTable[0].sTxPSQueue)) != NULL) {
                     if (skb_queue_empty(&pMgmt->sNodeDBTable[0].sTxPSQueue)) {
                         pMgmt->abyPSTxMap[0] &= ~byMask[0];
-                        pDevice->bMoreData = FALSE;
+                        pDevice->bMoreData = false;
                     }
                     else {
-                        pDevice->bMoreData = TRUE;
+                        pDevice->bMoreData = true;
                     }
                     if (!device_dma0_xmit(pDevice, skb, 0)) {
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Multicast ps tx fail \n");
@@ -826,10 +827,10 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                             // clear tx map
                             pMgmt->abyPSTxMap[pMgmt->sNodeDBTable[ii].wAID >> 3] &=
                                     ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
-                            pDevice->bMoreData = FALSE;
+                            pDevice->bMoreData = false;
                         }
                         else {
-                            pDevice->bMoreData = TRUE;
+                            pDevice->bMoreData = true;
                         }
                         if (!device_dma0_xmit(pDevice, skb, ii)) {
                             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "sta ps tx fail \n");
@@ -846,7 +847,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
                                     ~byMask[pMgmt->sNodeDBTable[ii].wAID & 7];
                         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Index=%d PS queue clear \n", ii);
                     }
-                    pMgmt->sNodeDBTable[ii].bRxPSPoll = FALSE;
+                    pMgmt->sNodeDBTable[ii].bRxPSPoll = false;
                 }
             }
 
@@ -856,7 +857,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
 
         case WLAN_CMD_RADIO_START :
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState == WLAN_CMD_RADIO_START\n");
-            if (pDevice->bRadioCmd == TRUE)
+            if (pDevice->bRadioCmd == true)
                 CARDbRadioPowerOn(pDevice);
             else
                 CARDbRadioPowerOff(pDevice);
@@ -896,23 +897,23 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
 
 
 static
-BOOL
+bool
 s_bCommandComplete (
     PSDevice pDevice
     )
 {
     PWLAN_IE_SSID pSSID;
-    BOOL          bRadioCmd = FALSE;
-    //WORD          wDeAuthenReason = 0;
-    BOOL          bForceSCAN = TRUE;
+    bool bRadioCmd = false;
+    //unsigned short wDeAuthenReason = 0;
+    bool bForceSCAN = true;
     PSMgmtObject  pMgmt = pDevice->pMgmt;
 
 
     pDevice->eCommandState = WLAN_CMD_IDLE;
     if (pDevice->cbFreeCmdQueue == CMD_Q_SIZE) {
         //Command Queue Empty
-        pDevice->bCmdRunning = FALSE;
-        return TRUE;
+        pDevice->bCmdRunning = false;
+        return true;
     }
     else {
         pDevice->eCommand = pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].eCmd;
@@ -921,7 +922,7 @@ s_bCommandComplete (
         bForceSCAN = pDevice->eCmdQueue[pDevice->uCmdDequeueIdx].bForceSCAN;
         ADD_ONE_WITH_WRAP_AROUND(pDevice->uCmdDequeueIdx, CMD_Q_SIZE);
         pDevice->cbFreeCmdQueue++;
-        pDevice->bCmdRunning = TRUE;
+        pDevice->bCmdRunning = true;
         switch ( pDevice->eCommand ) {
             case WLAN_CMD_BSSID_SCAN:
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"eCommandState= WLAN_CMD_BSSID_SCAN\n");
@@ -933,7 +934,7 @@ s_bCommandComplete (
                     memset(pMgmt->abyScanSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
                 }
 /*
-                if ((bForceSCAN == FALSE) && (pDevice->bLinkPass == TRUE)) {
+                if ((bForceSCAN == false) && (pDevice->bLinkPass == true)) {
                     if ((pSSID->len == ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->len) &&
                         ( !memcmp(pSSID->abySSID, ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID, pSSID->len))) {
                         pDevice->eCommandState = WLAN_CMD_IDLE;
@@ -974,25 +975,25 @@ s_bCommandComplete (
         vCommandTimerWait((void *)pDevice, 0);
     }
 
-    return TRUE;
+    return true;
 }
 
 
 
-BOOL bScheduleCommand (
+bool bScheduleCommand (
     void *hDeviceContext,
     CMD_CODE    eCommand,
-    PBYTE       pbyItem0
+    unsigned char *pbyItem0
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
 
 
     if (pDevice->cbFreeCmdQueue == 0) {
-        return (FALSE);
+        return (false);
     }
     pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].eCmd = eCommand;
-    pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = TRUE;
+    pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = true;
     memset(pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].abyCmdDesireSSID, 0 , WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
 
     if (pbyItem0 != NULL) {
@@ -1001,7 +1002,7 @@ BOOL bScheduleCommand (
             case WLAN_CMD_BSSID_SCAN:
                 memcpy(pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].abyCmdDesireSSID,
                          pbyItem0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
-                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = FALSE;
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].bForceSCAN = false;
                 break;
 
             case WLAN_CMD_SSID:
@@ -1014,7 +1015,7 @@ BOOL bScheduleCommand (
                 break;
 /*
             case WLAN_CMD_DEAUTH:
-                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].wDeAuthenReason = *((PWORD)pbyItem0);
+                pDevice->eCmdQueue[pDevice->uCmdEnqueueIdx].wDeAuthenReason = *((unsigned short *)pbyItem0);
                 break;
 */
 
@@ -1037,12 +1038,12 @@ BOOL bScheduleCommand (
     ADD_ONE_WITH_WRAP_AROUND(pDevice->uCmdEnqueueIdx, CMD_Q_SIZE);
     pDevice->cbFreeCmdQueue--;
 
-    if (pDevice->bCmdRunning == FALSE) {
+    if (pDevice->bCmdRunning == false) {
         s_bCommandComplete(pDevice);
     }
     else {
     }
-    return (TRUE);
+    return (true);
 
 }
 
@@ -1057,16 +1058,16 @@ BOOL bScheduleCommand (
  *  Out:
  *      none
  *
- * Return Value: TRUE if success; otherwise FALSE
+ * Return Value: true if success; otherwise false
  *
  */
-BOOL bClearBSSID_SCAN (
+bool bClearBSSID_SCAN (
     void *hDeviceContext
     )
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
-    UINT            uCmdDequeueIdx = pDevice->uCmdDequeueIdx;
-    UINT            ii;
+    unsigned int uCmdDequeueIdx = pDevice->uCmdDequeueIdx;
+    unsigned int ii;
 
     if ((pDevice->cbFreeCmdQueue < CMD_Q_SIZE) && (uCmdDequeueIdx != pDevice->uCmdEnqueueIdx)) {
         for (ii = 0; ii < (CMD_Q_SIZE - pDevice->cbFreeCmdQueue); ii ++) {
@@ -1077,7 +1078,7 @@ BOOL bClearBSSID_SCAN (
                 break;
         }
     }
-    return TRUE;
+    return true;
 }
 
 //mike add:reset command timer
@@ -1092,15 +1093,15 @@ vResetCommandTimer(
       del_timer(&pDevice->sTimerCommand);
   //init timer
       init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.data = (unsigned long) pDevice;
     pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
     pDevice->sTimerCommand.expires = RUN_AT(HZ);
     pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
     pDevice->uCmdDequeueIdx = 0;
     pDevice->uCmdEnqueueIdx = 0;
     pDevice->eCommandState = WLAN_CMD_IDLE;
-    pDevice->bCmdRunning = FALSE;
-    pDevice->bCmdClear = FALSE;
+    pDevice->bCmdRunning = false;
+    pDevice->bCmdClear = false;
 }
 
 
@@ -1125,16 +1126,16 @@ BSSvSecondTxData(
 
   spin_lock_irq(&pDevice->lock);
   #if 1
-  if(((pDevice->bLinkPass ==TRUE)&&(pMgmt->eAuthenMode < WMAC_AUTH_WPA)) ||  //open && sharekey linking
-      (pDevice->fWPA_Authened == TRUE)) {   //wpa linking
+  if(((pDevice->bLinkPass ==true)&&(pMgmt->eAuthenMode < WMAC_AUTH_WPA)) ||  //open && sharekey linking
+      (pDevice->fWPA_Authened == true)) {   //wpa linking
  #else
-  if(pDevice->bLinkPass ==TRUE) {
+  if(pDevice->bLinkPass ==true) {
  #endif
 
         //   printk("mike:%s-->InSleep Tx Data Procedure\n",__FUNCTION__);
-	  pDevice->fTxDataInSleep = TRUE;
+	  pDevice->fTxDataInSleep = true;
 	  PSbSendNullPacket(pDevice);      //send null packet
-	  pDevice->fTxDataInSleep = FALSE;
+	  pDevice->fTxDataInSleep = false;
   	}
   spin_unlock_irq(&pDevice->lock);
 
diff --git a/drivers/staging/vt6655/wcmd.h b/drivers/staging/vt6655/wcmd.h
index c3c41808951..69d4fc55b84 100644
--- a/drivers/staging/vt6655/wcmd.h
+++ b/drivers/staging/vt6655/wcmd.h
@@ -75,11 +75,11 @@ typedef enum tagCMD_STATUS {
 
 typedef struct tagCMD_ITEM {
     CMD_CODE eCmd;
-    BYTE     abyCmdDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    BOOL     bNeedRadioOFF;
-    WORD     wDeAuthenReason;
-    BOOL     bRadioCmd;
-    BOOL     bForceSCAN;
+    unsigned char abyCmdDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    bool bNeedRadioOFF;
+    unsigned short wDeAuthenReason;
+    bool bRadioCmd;
+    bool bForceSCAN;
 } CMD_ITEM, *PCMD_ITEM;
 
 // Command state
@@ -119,21 +119,21 @@ vCommandTimer (
     void *hDeviceContext
     );
 
-BOOL bClearBSSID_SCAN(
+bool bClearBSSID_SCAN(
     void *hDeviceContext
     );
 
-BOOL
+bool
 bScheduleCommand(
     void *hDeviceContext,
     CMD_CODE    eCommand,
-    PBYTE       pbyItem0
+    unsigned char *pbyItem0
     );
 
 void
 vCommandTimerWait(
     void *hDeviceContext,
-    UINT MSecond
+    unsigned int MSecond
     );
 #ifdef TxInSleep
 void
diff --git a/drivers/staging/vt6655/wctl.c b/drivers/staging/vt6655/wctl.c
index 64a66b2f1fc..c096583a772 100644
--- a/drivers/staging/vt6655/wctl.c
+++ b/drivers/staging/vt6655/wctl.c
@@ -52,8 +52,8 @@
 
 /*
  * Description:
- *      Scan Rx cache.  Return TRUE if packet is duplicate, else
- *      inserts in receive cache and returns FALSE.
+ *      Scan Rx cache.  Return true if packet is duplicate, else
+ *      inserts in receive cache and returns false.
  *
  * Parameters:
  *  In:
@@ -62,14 +62,14 @@
  *  Out:
  *      none
  *
- * Return Value: TRUE if packet duplicate; otherwise FALSE
+ * Return Value: true if packet duplicate; otherwise false
  *
  */
 
-BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
+bool WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
 {
-    UINT            uIndex;
-    UINT            ii;
+    unsigned int uIndex;
+    unsigned int ii;
     PSCacheEntry    pCacheEntry;
 
     if (IS_FC_RETRY(pMACHeader)) {
@@ -78,10 +78,10 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
         for (ii = 0; ii < DUPLICATE_RX_CACHE_LENGTH; ii++) {
             pCacheEntry = &(pCache->asCacheEntry[uIndex]);
             if ((pCacheEntry->wFmSequence == pMACHeader->wSeqCtl) &&
-                (IS_ETH_ADDRESS_EQUAL (&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
+                (!compare_ether_addr(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
                 ) {
                 /* Duplicate match */
-                return TRUE;
+                return true;
             }
             ADD_ONE_WITH_WRAP_AROUND(uIndex, DUPLICATE_RX_CACHE_LENGTH);
         }
@@ -91,7 +91,7 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
     pCacheEntry->wFmSequence = pMACHeader->wSeqCtl;
     memcpy(&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0]), ETH_ALEN);
     ADD_ONE_WITH_WRAP_AROUND(pCache->uInPtr, DUPLICATE_RX_CACHE_LENGTH);
-    return FALSE;
+    return false;
 }
 
 /*
@@ -108,13 +108,13 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
  * Return Value: index number in Defragment Database
  *
  */
-UINT WCTLuSearchDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
+unsigned int WCTLuSearchDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
 {
-UINT ii;
+unsigned int ii;
 
     for(ii=0;ii<pDevice->cbDFCB;ii++) {
-        if ((pDevice->sRxDFCB[ii].bInUse == TRUE) &&
-            (IS_ETH_ADDRESS_EQUAL (&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
+        if ((pDevice->sRxDFCB[ii].bInUse == true) &&
+            (!compare_ether_addr(&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
             ) {
             //
             return(ii);
@@ -138,17 +138,17 @@ UINT ii;
  * Return Value: index number in Defragment Database
  *
  */
-UINT WCTLuInsertDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
+unsigned int WCTLuInsertDFCB (PSDevice pDevice, PS802_11Header pMACHeader)
 {
-UINT ii;
+unsigned int ii;
 
     if (pDevice->cbFreeDFCB == 0)
         return(pDevice->cbDFCB);
     for(ii=0;ii<pDevice->cbDFCB;ii++) {
-        if (pDevice->sRxDFCB[ii].bInUse == FALSE) {
+        if (pDevice->sRxDFCB[ii].bInUse == false) {
             pDevice->cbFreeDFCB--;
             pDevice->sRxDFCB[ii].uLifetime = pDevice->dwMaxReceiveLifetime;
-            pDevice->sRxDFCB[ii].bInUse = TRUE;
+            pDevice->sRxDFCB[ii].bInUse = true;
             pDevice->sRxDFCB[ii].wSequence = (pMACHeader->wSeqCtl >> 4);
             pDevice->sRxDFCB[ii].wFragNum = (pMACHeader->wSeqCtl & 0x000F);
             memcpy(&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0]), ETH_ALEN);
@@ -172,15 +172,15 @@ UINT ii;
  *  Out:
  *      none
  *
- * Return Value: TRUE if it is valid fragment packet and we have resource to defragment; otherwise FALSE
+ * Return Value: true if it is valid fragment packet and we have resource to defragment; otherwise false
  *
  */
-BOOL WCTLbHandleFragment (PSDevice pDevice, PS802_11Header pMACHeader, UINT cbFrameLength, BOOL bWEP, BOOL bExtIV)
+bool WCTLbHandleFragment (PSDevice pDevice, PS802_11Header pMACHeader, unsigned int cbFrameLength, bool bWEP, bool bExtIV)
 {
-UINT            uHeaderSize;
+unsigned int uHeaderSize;
 
 
-    if (bWEP == TRUE) {
+    if (bWEP == true) {
         uHeaderSize = 28;
         if (bExtIV)
         // ExtIV
@@ -201,17 +201,17 @@ UINT            uHeaderSize;
         else {
             pDevice->uCurrentDFCBIdx = WCTLuInsertDFCB(pDevice, pMACHeader);
             if (pDevice->uCurrentDFCBIdx == pDevice->cbDFCB) {
-                return(FALSE);
+                return(false);
             }
         }
         // reserve 4 byte to match MAC RX Buffer
-        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer = (PBYTE) (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].skb->data + 4);
+        pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer = (unsigned char *) (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].skb->data + 4);
         memcpy(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer, pMACHeader, cbFrameLength);
         pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength = cbFrameLength;
         pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer += cbFrameLength;
         pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum++;
         //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "First pDevice->uCurrentDFCBIdx= %d\n", pDevice->uCurrentDFCBIdx);
-        return(FALSE);
+        return(false);
     }
     else {
         pDevice->uCurrentDFCBIdx = WCTLuSearchDFCB(pDevice, pMACHeader);
@@ -220,7 +220,7 @@ UINT            uHeaderSize;
                 (pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum == (pMACHeader->wSeqCtl & 0x000F)) &&
                 ((pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength + cbFrameLength - uHeaderSize) < 2346)) {
 
-                memcpy(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer, ((PBYTE) (pMACHeader) + uHeaderSize), (cbFrameLength - uHeaderSize));
+                memcpy(pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer, ((unsigned char *) (pMACHeader) + uHeaderSize), (cbFrameLength - uHeaderSize));
                 pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].cbFrameLength += (cbFrameLength - uHeaderSize);
                 pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].pbyRxBuffer += (cbFrameLength - uHeaderSize);
                 pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].wFragNum++;
@@ -229,21 +229,21 @@ UINT            uHeaderSize;
             else {
                 // seq error or frag # error flush DFCB
                 pDevice->cbFreeDFCB++;
-                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = FALSE;
-                return(FALSE);
+                pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = false;
+                return(false);
             }
         }
         else {
-            return(FALSE);
+            return(false);
         }
         if (IS_LAST_FRAGMENT_PKT(pMACHeader)) {
             //enq defragcontrolblock
             pDevice->cbFreeDFCB++;
-            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = FALSE;
+            pDevice->sRxDFCB[pDevice->uCurrentDFCBIdx].bInUse = false;
             //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Last pDevice->uCurrentDFCBIdx= %d\n", pDevice->uCurrentDFCBIdx);
-            return(TRUE);
+            return(true);
         }
-        return(FALSE);
+        return(false);
     }
 }
 
diff --git a/drivers/staging/vt6655/wctl.h b/drivers/staging/vt6655/wctl.h
index a1ac4791bfd..a92bb6d2b3f 100644
--- a/drivers/staging/vt6655/wctl.h
+++ b/drivers/staging/vt6655/wctl.h
@@ -97,10 +97,11 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL WCTLbIsDuplicate(PSCache pCache, PS802_11Header pMACHeader);
-BOOL WCTLbHandleFragment(PSDevice pDevice, PS802_11Header pMACHeader, UINT cbFrameLength, BOOL bWEP, BOOL bExtIV);
-UINT WCTLuSearchDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
-UINT WCTLuInsertDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
+bool WCTLbIsDuplicate(PSCache pCache, PS802_11Header pMACHeader);
+bool WCTLbHandleFragment(PSDevice pDevice, PS802_11Header pMACHeader,
+		unsigned int cbFrameLength, bool bWEP, bool bExtIV);
+unsigned int WCTLuSearchDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
+unsigned int WCTLuInsertDFCB(PSDevice pDevice, PS802_11Header pMACHeader);
 
 #endif // __WCTL_H__
 
diff --git a/drivers/staging/vt6655/wmgr.c b/drivers/staging/vt6655/wmgr.c
index 8af356fd139..e540110a430 100644
--- a/drivers/staging/vt6655/wmgr.c
+++ b/drivers/staging/vt6655/wmgr.c
@@ -65,6 +65,7 @@
 #include "desc.h"
 #include "device.h"
 #include "card.h"
+#include "channel.h"
 #include "80211hdr.h"
 #include "80211mgr.h"
 #include "wmgr.h"
@@ -93,9 +94,9 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 /*---------------------  Static Functions  --------------------------*/
 //2008-8-4 <add> by chester
-static BOOL ChannelExceedZoneType(
+static bool ChannelExceedZoneType(
     PSDevice pDevice,
-    BYTE byCurrChannel
+    unsigned char byCurrChannel
     );
 
 // Association/diassociation functions
@@ -104,9 +105,9 @@ PSTxMgmtPacket
 s_MgrMakeAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pDAddr,
-    WORD wCurrCapInfo,
-    WORD wListenInterval,
+    unsigned char *pDAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wListenInterval,
     PWLAN_IE_SSID pCurrSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -118,7 +119,7 @@ s_vMgrRxAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    UINT  uNodeIndex
+    unsigned int uNodeIndex
     );
 
 static
@@ -126,9 +127,9 @@ PSTxMgmtPacket
 s_MgrMakeReAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pDAddr,
-    WORD wCurrCapInfo,
-    WORD wListenInterval,
+    unsigned char *pDAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wListenInterval,
     PWLAN_IE_SSID pCurrSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -140,7 +141,7 @@ s_vMgrRxAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    BOOL bReAssocType
+    bool bReAssocType
     );
 
 static
@@ -225,7 +226,7 @@ s_vMgrRxBeacon(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    BOOL bInScan
+    bool bInScan
     );
 
 static
@@ -240,12 +241,12 @@ PSTxMgmtPacket
 s_MgrMakeBeacon(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wCurrBeaconPeriod,
-    UINT uCurrChannel,
-    WORD wCurrATIMWinodw,
+    unsigned short wCurrCapInfo,
+    unsigned short wCurrBeaconPeriod,
+    unsigned int uCurrChannel,
+    unsigned short wCurrATIMWinodw,
     PWLAN_IE_SSID pCurrSSID,
-    PBYTE pCurrBSSID,
+    unsigned char *pCurrBSSID,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     );
@@ -257,10 +258,10 @@ PSTxMgmtPacket
 s_MgrMakeAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wAssocStatus,
-    WORD wAssocAID,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wAssocStatus,
+    unsigned short wAssocAID,
+    unsigned char *pDstAddr,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     );
@@ -271,10 +272,10 @@ PSTxMgmtPacket
 s_MgrMakeReAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wAssocStatus,
-    WORD wAssocAID,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wAssocStatus,
+    unsigned short wAssocAID,
+    unsigned char *pDstAddr,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     );
@@ -285,16 +286,16 @@ PSTxMgmtPacket
 s_MgrMakeProbeResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wCurrBeaconPeriod,
-    UINT uCurrChannel,
-    WORD wCurrATIMWinodw,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wCurrBeaconPeriod,
+    unsigned int uCurrChannel,
+    unsigned short wCurrATIMWinodw,
+    unsigned char *pDstAddr,
     PWLAN_IE_SSID pCurrSSID,
-    PBYTE pCurrBSSID,
+    unsigned char *pCurrBSSID,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates,
-    BYTE byPHYType
+    unsigned char byPHYType
     );
 
 // received status
@@ -302,7 +303,7 @@ static
 void
 s_vMgrLogStatus(
     PSMgmtObject pMgmt,
-    WORD wStatus
+    unsigned short wStatus
     );
 
 
@@ -310,18 +311,18 @@ static
 void
 s_vMgrSynchBSS (
     PSDevice      pDevice,
-    UINT          uBSSMode,
+    unsigned int uBSSMode,
     PKnownBSS     pCurr,
     PCMD_STATUS  pStatus
     );
 
 
-static BOOL
+static bool
 s_bCipherMatch (
     PKnownBSS                        pBSSNode,
     NDIS_802_11_ENCRYPTION_STATUS    EncStatus,
-    PBYTE                           pbyCCSPK,
-    PBYTE                           pbyCCSGK
+    unsigned char *pbyCCSPK,
+    unsigned char *pbyCCSGK
     );
 
  static void  Encyption_Rebuild(
@@ -368,7 +369,7 @@ vMgrObjectInit(
     pMgmt->byCSSPK = KEY_CTL_NONE;
     pMgmt->byCSSGK = KEY_CTL_NONE;
     pMgmt->wIBSSBeaconPeriod = DEFAULT_IBSS_BI;
-    BSSvClearBSSList((void *)pDevice, FALSE);
+    BSSvClearBSSList((void *)pDevice, false);
 
     return;
 }
@@ -393,22 +394,22 @@ vMgrTimerInit(
 
 
     init_timer(&pMgmt->sTimerSecondCallback);
-    pMgmt->sTimerSecondCallback.data = (ULONG)pDevice;
+    pMgmt->sTimerSecondCallback.data = (unsigned long) pDevice;
     pMgmt->sTimerSecondCallback.function = (TimerFunction)BSSvSecondCallBack;
     pMgmt->sTimerSecondCallback.expires = RUN_AT(HZ);
 
     init_timer(&pDevice->sTimerCommand);
-    pDevice->sTimerCommand.data = (ULONG)pDevice;
+    pDevice->sTimerCommand.data = (unsigned long) pDevice;
     pDevice->sTimerCommand.function = (TimerFunction)vCommandTimer;
     pDevice->sTimerCommand.expires = RUN_AT(HZ);
 
    #ifdef TxInSleep
     init_timer(&pDevice->sTimerTxData);
-    pDevice->sTimerTxData.data = (ULONG)pDevice;
+    pDevice->sTimerTxData.data = (unsigned long) pDevice;
     pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
     pDevice->sTimerTxData.expires = RUN_AT(10*HZ);      //10s callback
-    pDevice->fTxDataInSleep = FALSE;
-    pDevice->IsTxDataTrigger = FALSE;
+    pDevice->fTxDataInSleep = false;
+    pDevice->IsTxDataTrigger = false;
     pDevice->nTxDataTimeCout = 0;
    #endif
 
@@ -441,7 +442,7 @@ vMgrObjectReset(
 
     pMgmt->eCurrMode = WMAC_MODE_STANDBY;
     pMgmt->eCurrState = WMAC_STATE_IDLE;
-    pDevice->bEnablePSMode = FALSE;
+    pDevice->bEnablePSMode = false;
     // TODO: timer
 
     return;
@@ -487,15 +488,15 @@ vMgrAssocBeginSta(
     // ERP Phy (802.11g) should support short preamble.
     if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
-        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == TRUE) {
+        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == true) {
             pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTSLOTTIME(1);
         }
     } else if (pMgmt->eCurrentPHYMode == PHY_TYPE_11B) {
-        if (CARDbIsShortPreamble(pMgmt->pAdapter) == TRUE) {
+        if (CARDbIsShortPreamble(pMgmt->pAdapter) == true) {
             pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
         }
     }
-    if (pMgmt->b11hEnable == TRUE)
+    if (pMgmt->b11hEnable == true)
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
 
     /* build an assocreq frame and send it */
@@ -566,15 +567,15 @@ vMgrReAssocBeginSta(
     // ERP Phy (802.11g) should support short preamble.
     if (pMgmt->eCurrentPHYMode == PHY_TYPE_11G) {
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
-        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == TRUE) {
+        if (CARDbIsShorSlotTime(pMgmt->pAdapter) == true) {
             pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTSLOTTIME(1);
         }
     } else if (pMgmt->eCurrentPHYMode == PHY_TYPE_11B) {
-        if (CARDbIsShortPreamble(pMgmt->pAdapter) == TRUE) {
+        if (CARDbIsShortPreamble(pMgmt->pAdapter) == true) {
             pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SHORTPREAMBLE(1);
         }
     }
-    if (pMgmt->b11hEnable == TRUE)
+    if (pMgmt->b11hEnable == true)
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
 
 
@@ -619,8 +620,8 @@ void
 vMgrDisassocBeginSta(
     void *hDeviceContext,
     PSMgmtObject pMgmt,
-    PBYTE  abyDestAddress,
-    WORD    wReason,
+    unsigned char *abyDestAddress,
+    unsigned short wReason,
     PCMD_STATUS pStatus
     )
 {
@@ -630,10 +631,10 @@ vMgrDisassocBeginSta(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_DISASSOC_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
 
     // Setup the sFrame structure
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_DISASSOC_FR_MAXLEN;
 
     // format fixed field frame structure
@@ -683,17 +684,17 @@ s_vMgrRxAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    UINT uNodeIndex
+    unsigned int uNodeIndex
     )
 {
     WLAN_FR_ASSOCREQ    sFrame;
     CMD_STATUS          Status;
     PSTxMgmtPacket      pTxPacket;
-    WORD                wAssocStatus = 0;
-    WORD                wAssocAID = 0;
-    UINT                uRateLen = WLAN_RATES_MAXLEN;
-    BYTE                abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE                abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned short wAssocStatus = 0;
+    unsigned short wAssocAID = 0;
+    unsigned int uRateLen = WLAN_RATES_MAXLEN;
+    unsigned char abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
 
 
     if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP)
@@ -708,7 +709,7 @@ s_vMgrRxAssocRequest(
     memset(abyCurrSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
     memset(abyCurrExtSuppRates, 0, WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1);
     sFrame.len = pRxPacket->cbMPDULen;
-    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
 
     vMgrDecodeAssocRequest(&sFrame);
 
@@ -717,7 +718,7 @@ s_vMgrRxAssocRequest(
         pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = cpu_to_le16(*sFrame.pwCapInfo);
         pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = cpu_to_le16(*sFrame.pwListenInterval);
         pMgmt->sNodeDBTable[uNodeIndex].bPSEnable =
-                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? TRUE : FALSE;
+                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? true : false;
         // Todo: check sta basic rate, if ap can't support, set status code
         if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
             uRateLen = WLAN_RATES_MAXLEN_11B;
@@ -739,7 +740,7 @@ s_vMgrRxAssocRequest(
         RATEvParseMaxRate((void *)pDevice,
                            (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
                            (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
-                           FALSE, // do not change our basic rate
+                           false, // do not change our basic rate
                            &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
                            &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
                            &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
@@ -758,20 +759,20 @@ s_vMgrRxAssocRequest(
                 WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
         pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime =
                 WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
-        pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)uNodeIndex;
+        pMgmt->sNodeDBTable[uNodeIndex].wAID = (unsigned short)uNodeIndex;
         wAssocStatus = WLAN_MGMT_STATUS_SUCCESS;
-        wAssocAID = (WORD)uNodeIndex;
+        wAssocAID = (unsigned short)uNodeIndex;
         // check if ERP support
         if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
-           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = true;
 
         if (pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate <= RATE_11M) {
             // B only STA join
-            pDevice->bProtectMode = TRUE;
-            pDevice->bNonERPPresent = TRUE;
+            pDevice->bProtectMode = true;
+            pDevice->bNonERPPresent = true;
         }
-        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == FALSE) {
-            pDevice->bBarkerPreambleMd = TRUE;
+        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == false) {
+            pDevice->bBarkerPreambleMd = true;
         }
 
         DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "Associate AID= %d \n", wAssocAID);
@@ -845,17 +846,17 @@ s_vMgrRxReAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    UINT uNodeIndex
+    unsigned int uNodeIndex
     )
 {
     WLAN_FR_REASSOCREQ    sFrame;
     CMD_STATUS          Status;
     PSTxMgmtPacket      pTxPacket;
-    WORD                wAssocStatus = 0;
-    WORD                wAssocAID = 0;
-    UINT                uRateLen = WLAN_RATES_MAXLEN;
-    BYTE                abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE                abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned short wAssocStatus = 0;
+    unsigned short wAssocAID = 0;
+    unsigned int	uRateLen = WLAN_RATES_MAXLEN;
+    unsigned char abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
 
     if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP)
         return;
@@ -866,7 +867,7 @@ s_vMgrRxReAssocRequest(
     //decode the frame
     memset(&sFrame, 0, sizeof(WLAN_FR_REASSOCREQ));
     sFrame.len = pRxPacket->cbMPDULen;
-    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
     vMgrDecodeReassocRequest(&sFrame);
 
     if (pMgmt->sNodeDBTable[uNodeIndex].eNodeState >= NODE_AUTH) {
@@ -874,7 +875,7 @@ s_vMgrRxReAssocRequest(
         pMgmt->sNodeDBTable[uNodeIndex].wCapInfo = cpu_to_le16(*sFrame.pwCapInfo);
         pMgmt->sNodeDBTable[uNodeIndex].wListenInterval = cpu_to_le16(*sFrame.pwListenInterval);
         pMgmt->sNodeDBTable[uNodeIndex].bPSEnable =
-                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? TRUE : FALSE;
+                WLAN_GET_FC_PWRMGT(sFrame.pHdr->sA3.wFrameCtl) ? true : false;
         // Todo: check sta basic rate, if ap can't support, set status code
 
         if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
@@ -898,7 +899,7 @@ s_vMgrRxReAssocRequest(
         RATEvParseMaxRate((void *)pDevice,
                           (PWLAN_IE_SUPP_RATES)abyCurrSuppRates,
                           (PWLAN_IE_SUPP_RATES)abyCurrExtSuppRates,
-                           FALSE, // do not change our basic rate
+                           false, // do not change our basic rate
                            &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
                            &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
                            &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
@@ -917,21 +918,21 @@ s_vMgrRxReAssocRequest(
                 WLAN_GET_CAP_INFO_SHORTPREAMBLE(*sFrame.pwCapInfo);
         pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime =
                 WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
-        pMgmt->sNodeDBTable[uNodeIndex].wAID = (WORD)uNodeIndex;
+        pMgmt->sNodeDBTable[uNodeIndex].wAID = (unsigned short)uNodeIndex;
         wAssocStatus = WLAN_MGMT_STATUS_SUCCESS;
-        wAssocAID = (WORD)uNodeIndex;
+        wAssocAID = (unsigned short)uNodeIndex;
 
         // if suppurt ERP
         if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
-           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+           pMgmt->sNodeDBTable[uNodeIndex].bERPExist = true;
 
         if (pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate <= RATE_11M) {
             // B only STA join
-            pDevice->bProtectMode = TRUE;
-            pDevice->bNonERPPresent = TRUE;
+            pDevice->bProtectMode = true;
+            pDevice->bNonERPPresent = true;
         }
-        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == FALSE) {
-            pDevice->bBarkerPreambleMd = TRUE;
+        if (pMgmt->sNodeDBTable[uNodeIndex].bShortPreamble == false) {
+            pDevice->bBarkerPreambleMd = true;
         }
 
         DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "Rx ReAssociate AID= %d \n", wAssocAID);
@@ -995,12 +996,12 @@ s_vMgrRxAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    BOOL bReAssocType
+    bool bReAssocType
     )
 {
     WLAN_FR_ASSOCRESP   sFrame;
     PWLAN_IE_SSID   pItemSSID;
-    PBYTE   pbyIEs;
+    unsigned char *pbyIEs;
     viawget_wpa_header *wpahdr;
 
 
@@ -1009,7 +1010,7 @@ s_vMgrRxAssocResponse(
          pMgmt->eCurrState == WMAC_STATE_ASSOC) {
 
         sFrame.len = pRxPacket->cbMPDULen;
-        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
         // decode the frame
         vMgrDecodeAssocResponse(&sFrame);
         if ((sFrame.pwCapInfo == 0) ||
@@ -1044,7 +1045,7 @@ s_vMgrRxAssocResponse(
             BSSvUpdateAPNode((void *)pDevice, sFrame.pwCapInfo, sFrame.pSuppRates, sFrame.pExtSuppRates);
             pItemSSID = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
             DBG_PRT(MSG_LEVEL_INFO, KERN_INFO "Link with AP(SSID): %s\n", pItemSSID->abySSID);
-            pDevice->bLinkPass = TRUE;
+            pDevice->bLinkPass = true;
             pDevice->uBBVGADiffCount = 0;
             if ((pDevice->bWPADEVUp) && (pDevice->skb != NULL)) {
 	  if(skb_tailroom(pDevice->skb) <(sizeof(viawget_wpa_header)+pMgmt->sAssocInfo.AssocInfo.ResponseIELength+
@@ -1073,9 +1074,9 @@ s_vMgrRxAssocResponse(
 
 //2008-0409-07, <Add> by Einsn Liu
 #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-	//if(pDevice->bWPADevEnable == TRUE)
+	//if(pDevice->bWPADevEnable == true)
 		{
-		BYTE buf[512];
+		unsigned char buf[512];
 		size_t len;
 		union iwreq_data  wrqu;
 		int we_event;
@@ -1128,7 +1129,7 @@ s_vMgrRxAssocResponse(
 //need clear flags related to Networkmanager
 
               pDevice->bwextcount = 0;
-              pDevice->bWPASuppWextEnabled = FALSE;
+              pDevice->bWPASuppWextEnabled = false;
 #endif
 
 
@@ -1163,8 +1164,8 @@ vMgrAuthenBeginSta(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
     vMgrEncodeAuthen(&sFrame);
     /* insert values */
@@ -1212,8 +1213,8 @@ void
 vMgrDeAuthenBeginSta(
     void *hDeviceContext,
     PSMgmtObject  pMgmt,
-    PBYTE  abyDestAddress,
-    WORD    wReason,
+    unsigned char *abyDestAddress,
+    unsigned short wReason,
     PCMD_STATUS pStatus
     )
 {
@@ -1224,8 +1225,8 @@ vMgrDeAuthenBeginSta(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_DEAUTHEN_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_DEAUTHEN_FR_MAXLEN;
     vMgrEncodeDeauthen(&sFrame);
     /* insert values */
@@ -1282,7 +1283,7 @@ s_vMgrRxAuthentication(
 
     // decode the frame
     sFrame.len = pRxPacket->cbMPDULen;
-    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
     vMgrDecodeAuthen(&sFrame);
     switch (cpu_to_le16((*(sFrame.pwAuthSequence )))){
         case 1:
@@ -1331,7 +1332,7 @@ s_vMgrRxAuthenSequence_1(
      )
 {
     PSTxMgmtPacket      pTxPacket = NULL;
-    UINT                uNodeIndex;
+    unsigned int	uNodeIndex;
     WLAN_FR_AUTHEN      sFrame;
     PSKeyItem           pTransmitKey;
 
@@ -1353,8 +1354,8 @@ s_vMgrRxAuthenSequence_1(
     // send auth reply
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
     // format buffer structure
     vMgrEncodeAuthen(&sFrame);
@@ -1393,7 +1394,7 @@ s_vMgrRxAuthenSequence_1(
         sFrame.pChallenge->len = WLAN_CHALLENGE_LEN;
         memset(pMgmt->abyChallenge, 0, WLAN_CHALLENGE_LEN);
         // get group key
-        if(KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, GROUP_KEY, &pTransmitKey) == TRUE) {
+        if(KeybGetTransmitKey(&(pDevice->sKey), pDevice->abyBroadcastAddr, GROUP_KEY, &pTransmitKey) == true) {
             rc4_init(&pDevice->SBox, pDevice->abyPRNG, pTransmitKey->uKeyLength+3);
             rc4_encrypt(&pDevice->SBox, pMgmt->abyChallenge, pMgmt->abyChallenge, WLAN_CHALLENGE_LEN);
         }
@@ -1466,8 +1467,8 @@ s_vMgrRxAuthenSequence_2(
             if (cpu_to_le16((*(pFrame->pwStatus))) == WLAN_MGMT_STATUS_SUCCESS) {
                 pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
                 memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
-                pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-                sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+                pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+                sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
                 sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
                 // format buffer structure
                 vMgrEncodeAuthen(&sFrame);
@@ -1539,8 +1540,8 @@ s_vMgrRxAuthenSequence_3(
     )
 {
     PSTxMgmtPacket      pTxPacket = NULL;
-    UINT                uStatusCode = 0 ;
-    UINT                uNodeIndex = 0;
+    unsigned int uStatusCode = 0 ;
+    unsigned int uNodeIndex = 0;
     WLAN_FR_AUTHEN      sFrame;
 
     if (!WLAN_GET_FC_ISWEP(pFrame->pHdr->sA3.wFrameCtl)) {
@@ -1573,8 +1574,8 @@ reply:
     // send auth reply
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_AUTHEN_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_AUTHEN_FR_MAXLEN;
     // format buffer structure
     vMgrEncodeAuthen(&sFrame);
@@ -1666,7 +1667,7 @@ s_vMgrRxDisassociation(
     )
 {
     WLAN_FR_DISASSOC    sFrame;
-    UINT        uNodeIndex = 0;
+    unsigned int uNodeIndex = 0;
 //    CMD_STATUS          CmdStatus;
     viawget_wpa_header *wpahdr;
 
@@ -1674,7 +1675,7 @@ s_vMgrRxDisassociation(
         // if is acting an AP..
         // a STA is leaving this BSS..
         sFrame.len = pRxPacket->cbMPDULen;
-        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
         if (BSSDBbIsSTAInNodeDB(pMgmt, pRxPacket->p80211Header->sA3.abyAddr2, &uNodeIndex)) {
             BSSvRemoveOneNode(pDevice, uNodeIndex);
         }
@@ -1684,7 +1685,7 @@ s_vMgrRxDisassociation(
     }
     else if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA ){
         sFrame.len = pRxPacket->cbMPDULen;
-        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
         vMgrDecodeDisassociation(&sFrame);
         DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO "AP disassociated me, reason=%d.\n", cpu_to_le16(*(sFrame.pwReason)));
         //TODO: do something let upper layer know or
@@ -1709,7 +1710,7 @@ s_vMgrRxDisassociation(
          };
 
  #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-  // if(pDevice->bWPASuppWextEnabled == TRUE)
+  // if(pDevice->bWPASuppWextEnabled == true)
       {
 	union iwreq_data  wrqu;
 	memset(&wrqu, 0, sizeof (wrqu));
@@ -1745,7 +1746,7 @@ s_vMgrRxDeauthentication(
     )
 {
     WLAN_FR_DEAUTHEN    sFrame;
-    UINT        uNodeIndex = 0;
+    unsigned int uNodeIndex = 0;
     viawget_wpa_header *wpahdr;
 
 
@@ -1754,7 +1755,7 @@ s_vMgrRxDeauthentication(
         // if is acting an AP..
         // a STA is leaving this BSS..
         sFrame.len = pRxPacket->cbMPDULen;
-        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
         if (BSSDBbIsSTAInNodeDB(pMgmt, pRxPacket->p80211Header->sA3.abyAddr2, &uNodeIndex)) {
             BSSvRemoveOneNode(pDevice, uNodeIndex);
         }
@@ -1765,17 +1766,17 @@ s_vMgrRxDeauthentication(
     else {
         if (pMgmt->eCurrMode == WMAC_MODE_ESS_STA ) {
             sFrame.len = pRxPacket->cbMPDULen;
-            sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+            sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
             vMgrDecodeDeauthen(&sFrame);
             DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO  "AP deauthed me, reason=%d.\n", cpu_to_le16((*(sFrame.pwReason))));
             // TODO: update BSS list for specific BSSID if pre-authentication case
-            if (IS_ETH_ADDRESS_EQUAL(sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID)) {
+            if (!compare_ether_addr(sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID)) {
                 if (pMgmt->eCurrState >= WMAC_STATE_AUTHPENDING) {
-                    pMgmt->sNodeDBTable[0].bActive = FALSE;
+                    pMgmt->sNodeDBTable[0].bActive = false;
                     pMgmt->eCurrMode = WMAC_MODE_STANDBY;
                     pMgmt->eCurrState = WMAC_STATE_IDLE;
                     netif_stop_queue(pDevice->dev);
-                    pDevice->bLinkPass = FALSE;
+                    pDevice->bLinkPass = false;
                 }
             };
 
@@ -1795,7 +1796,7 @@ s_vMgrRxDeauthentication(
            };
 
    #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-  // if(pDevice->bWPASuppWextEnabled == TRUE)
+  // if(pDevice->bWPASuppWextEnabled == true)
       {
 	union iwreq_data  wrqu;
 	memset(&wrqu, 0, sizeof (wrqu));
@@ -1825,23 +1826,23 @@ s_vMgrRxDeauthentication(
  *               True:exceed;
  *                False:normal case
 -*/
-static BOOL
+static bool
 ChannelExceedZoneType(
     PSDevice pDevice,
-    BYTE byCurrChannel
+    unsigned char byCurrChannel
     )
 {
-  BOOL exceed=FALSE;
+  bool exceed=false;
 
   switch(pDevice->byZoneType) {
   	case 0x00:                  //USA:1~11
                      if((byCurrChannel<1) ||(byCurrChannel>11))
-	                exceed = TRUE;
+	                exceed = true;
 	         break;
 	case 0x01:                  //Japan:1~13
 	case 0x02:                  //Europe:1~13
                      if((byCurrChannel<1) ||(byCurrChannel>13))
-	                exceed = TRUE;
+	                exceed = true;
 	         break;
 	default:                    //reserve for other zonetype
 		break;
@@ -1868,39 +1869,39 @@ s_vMgrRxBeacon(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
     PSRxMgmtPacket pRxPacket,
-    BOOL bInScan
+    bool bInScan
     )
 {
 
     PKnownBSS           pBSSList;
     WLAN_FR_BEACON      sFrame;
     QWORD               qwTSFOffset;
-    BOOL                bIsBSSIDEqual = FALSE;
-    BOOL                bIsSSIDEqual = FALSE;
-    BOOL                bTSFLargeDiff = FALSE;
-    BOOL                bTSFOffsetPostive = FALSE;
-    BOOL                bUpdateTSF = FALSE;
-    BOOL                bIsAPBeacon = FALSE;
-    BOOL                bIsChannelEqual = FALSE;
-    UINT                uLocateByteIndex;
-    BYTE                byTIMBitOn = 0;
-    WORD                wAIDNumber = 0;
-    UINT                uNodeIndex;
+    bool bIsBSSIDEqual = false;
+    bool bIsSSIDEqual = false;
+    bool bTSFLargeDiff = false;
+    bool bTSFOffsetPostive = false;
+    bool bUpdateTSF = false;
+    bool bIsAPBeacon = false;
+    bool bIsChannelEqual = false;
+    unsigned int uLocateByteIndex;
+    unsigned char byTIMBitOn = 0;
+    unsigned short wAIDNumber = 0;
+    unsigned int uNodeIndex;
     QWORD               qwTimestamp, qwLocalTSF;
     QWORD               qwCurrTSF;
-    WORD                wStartIndex = 0;
-    WORD                wAIDIndex = 0;
-    BYTE                byCurrChannel = pRxPacket->byRxChannel;
+    unsigned short wStartIndex = 0;
+    unsigned short wAIDIndex = 0;
+    unsigned char byCurrChannel = pRxPacket->byRxChannel;
     ERPObject           sERP;
-    UINT                uRateLen = WLAN_RATES_MAXLEN;
-    BOOL                bChannelHit = FALSE;
-    BOOL                bUpdatePhyParameter = FALSE;
-    BYTE                byIEChannel = 0;
+    unsigned int uRateLen = WLAN_RATES_MAXLEN;
+    bool bChannelHit = false;
+    bool bUpdatePhyParameter = false;
+    unsigned char byIEChannel = 0;
 
 
     memset(&sFrame, 0, sizeof(WLAN_FR_BEACON));
     sFrame.len = pRxPacket->cbMPDULen;
-    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
 
     // decode the beacon frame
     vMgrDecodeBeacon(&sFrame);
@@ -1917,29 +1918,29 @@ s_vMgrRxBeacon(
     if (sFrame.pDSParms != NULL) {
         if (byCurrChannel > CB_MAX_CHANNEL_24G) {
             // channel remapping to
-            byIEChannel = CARDbyGetChannelMapping(pDevice, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
+            byIEChannel = get_channel_mapping(pDevice, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
         } else {
             byIEChannel = sFrame.pDSParms->byCurrChannel;
         }
         if (byCurrChannel != byIEChannel) {
             // adjust channel info. bcs we rcv adjcent channel pakckets
-            bChannelHit = FALSE;
+            bChannelHit = false;
             byCurrChannel = byIEChannel;
         }
     } else {
         // no DS channel info
-        bChannelHit = TRUE;
+        bChannelHit = true;
     }
 //2008-0730-01<Add>by MikeLiu
-if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
+if(ChannelExceedZoneType(pDevice,byCurrChannel)==true)
       return;
 
     if (sFrame.pERP != NULL) {
         sERP.byERP = sFrame.pERP->byContext;
-        sERP.bERPExist = TRUE;
+        sERP.bERPExist = true;
 
     } else {
-        sERP.bERPExist = FALSE;
+        sERP.bERPExist = false;
         sERP.byERP = 0;
     }
 
@@ -1993,8 +1994,8 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
         return;
     }
 
-    if(byCurrChannel == (BYTE)pMgmt->uCurrChannel)
-       bIsChannelEqual = TRUE;
+    if(byCurrChannel == (unsigned char)pMgmt->uCurrChannel)
+       bIsChannelEqual = true;
 
     if (bIsChannelEqual && (pMgmt->eCurrMode == WMAC_MODE_ESS_AP)) {
 
@@ -2021,7 +2022,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
         if (WLAN_GET_ERP_USE_PROTECTION(pDevice->byERPFlag)){
             if (!pDevice->bProtectMode) {
                  MACvEnableProtectMD(pDevice->PortOffset);
-                 pDevice->bProtectMode = TRUE;
+                 pDevice->bProtectMode = true;
             }
         }
     }
@@ -2035,7 +2036,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
                pMgmt->abyCurrBSSID,
                WLAN_BSSID_LEN) == 0) {
 
-        bIsBSSIDEqual = TRUE;
+        bIsBSSIDEqual = true;
 
 // 2008-05-21 <add> by Richardtai
         pDevice->uCurrRSSI = pRxPacket->uRSSI;
@@ -2052,30 +2053,30 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
                    ((PWLAN_IE_SSID)pMgmt->abyCurrSSID)->abySSID,
                    sFrame.pSSID->len
                    ) == 0) {
-            bIsSSIDEqual = TRUE;
+            bIsSSIDEqual = true;
         };
     }
 
-    if ((WLAN_GET_CAP_INFO_ESS(*sFrame.pwCapInfo)== TRUE) &&
-        (bIsBSSIDEqual == TRUE) &&
-        (bIsSSIDEqual == TRUE) &&
+    if ((WLAN_GET_CAP_INFO_ESS(*sFrame.pwCapInfo)== true) &&
+        (bIsBSSIDEqual == true) &&
+        (bIsSSIDEqual == true) &&
         (pMgmt->eCurrMode == WMAC_MODE_ESS_STA) &&
         (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
         // add state check to prevent reconnect fail since we'll receive Beacon
 
-        bIsAPBeacon = TRUE;
+        bIsAPBeacon = true;
 
         if (pBSSList != NULL) {
 
             // Compare PHY paramater setting
             if (pMgmt->wCurrCapInfo != pBSSList->wCapInfo) {
-                bUpdatePhyParameter = TRUE;
+                bUpdatePhyParameter = true;
                 pMgmt->wCurrCapInfo = pBSSList->wCapInfo;
             }
             if (sFrame.pERP != NULL) {
                 if ((sFrame.pERP->byElementID == WLAN_EID_ERP) &&
                     (pMgmt->byERPContext != sFrame.pERP->byContext)) {
-                    bUpdatePhyParameter = TRUE;
+                    bUpdatePhyParameter = true;
                     pMgmt->byERPContext = sFrame.pERP->byContext;
                 }
             }
@@ -2094,7 +2095,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
             RATEvParseMaxRate( (void *)pDevice,
                                (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                                (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
-                               TRUE,
+                               true,
                                &(pMgmt->sNodeDBTable[0].wMaxBasicRate),
                                &(pMgmt->sNodeDBTable[0].wMaxSuppRate),
                                &(pMgmt->sNodeDBTable[0].wSuppRate),
@@ -2104,7 +2105,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
 #ifdef	PLICE_DEBUG
 		//printk("RxBeacon:MaxSuppRate is %d\n",pMgmt->sNodeDBTable[0].wMaxSuppRate);
 #endif
-			if (bUpdatePhyParameter == TRUE) {
+			if (bUpdatePhyParameter == true) {
                 CARDbSetPhyParameter( pMgmt->pAdapter,
                                       pMgmt->eCurrentPHYMode,
                                       pMgmt->wCurrCapInfo,
@@ -2115,19 +2116,19 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
             }
             if (sFrame.pIE_PowerConstraint != NULL) {
                 CARDvSetPowerConstraint(pMgmt->pAdapter,
-                                        (BYTE) pBSSList->uChannel,
+                                        (unsigned char) pBSSList->uChannel,
                                         sFrame.pIE_PowerConstraint->byPower
                                         );
             }
             if (sFrame.pIE_CHSW != NULL) {
                 CARDbChannelSwitch( pMgmt->pAdapter,
                                     sFrame.pIE_CHSW->byMode,
-                                    CARDbyGetChannelMapping(pMgmt->pAdapter, sFrame.pIE_CHSW->byMode, pMgmt->eCurrentPHYMode),
+                                    get_channel_mapping(pMgmt->pAdapter, sFrame.pIE_CHSW->byMode, pMgmt->eCurrentPHYMode),
                                     sFrame.pIE_CHSW->byCount
                                     );
 
-            } else if (bIsChannelEqual == FALSE) {
-                CARDbSetChannel(pMgmt->pAdapter, pBSSList->uChannel);
+            } else if (bIsChannelEqual == false) {
+                set_channel(pMgmt->pAdapter, pBSSList->uChannel);
             }
         }
     }
@@ -2148,17 +2149,17 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
     // check if beacon TSF larger or small than our local TSF
     if (HIDWORD(qwTimestamp) == HIDWORD(qwLocalTSF)) {
         if (LODWORD(qwTimestamp) >= LODWORD(qwLocalTSF)) {
-            bTSFOffsetPostive = TRUE;
+            bTSFOffsetPostive = true;
         }
         else {
-            bTSFOffsetPostive = FALSE;
+            bTSFOffsetPostive = false;
         }
     }
     else if (HIDWORD(qwTimestamp) > HIDWORD(qwLocalTSF)) {
-        bTSFOffsetPostive = TRUE;
+        bTSFOffsetPostive = true;
     }
     else if (HIDWORD(qwTimestamp) < HIDWORD(qwLocalTSF)) {
-        bTSFOffsetPostive = FALSE;
+        bTSFOffsetPostive = false;
     };
 
     if (bTSFOffsetPostive) {
@@ -2170,21 +2171,21 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
 
     if (HIDWORD(qwTSFOffset) != 0 ||
         (LODWORD(qwTSFOffset) > TRIVIAL_SYNC_DIFFERENCE )) {
-         bTSFLargeDiff = TRUE;
+         bTSFLargeDiff = true;
     }
 
 
     // if infra mode
-    if (bIsAPBeacon == TRUE) {
+    if (bIsAPBeacon == true) {
 
         // Infra mode: Local TSF always follow AP's TSF if Difference huge.
         if (bTSFLargeDiff)
-            bUpdateTSF = TRUE;
+            bUpdateTSF = true;
 
-        if ((pDevice->bEnablePSMode == TRUE) &&(sFrame.pTIM != 0)) {
+        if ((pDevice->bEnablePSMode == true) &&(sFrame.pTIM != 0)) {
 
             // deal with DTIM, analysis TIM
-            pMgmt->bMulticastTIM = WLAN_MGMT_IS_MULTICAST_TIM(sFrame.pTIM->byBitMapCtl) ? TRUE : FALSE ;
+            pMgmt->bMulticastTIM = WLAN_MGMT_IS_MULTICAST_TIM(sFrame.pTIM->byBitMapCtl) ? true : false ;
             pMgmt->byDTIMCount = sFrame.pTIM->byDTIMCount;
             pMgmt->byDTIMPeriod = sFrame.pTIM->byDTIMPeriod;
             wAIDNumber = pMgmt->wCurrAID & ~(BIT14|BIT15);
@@ -2199,19 +2200,19 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
                 // len = byDTIMCount + byDTIMPeriod + byDTIMPeriod + byVirtBitMap[0~250]
                 if (sFrame.pTIM->len >= (uLocateByteIndex + 4)) {
                     byTIMBitOn  = (0x01) << ((wAIDNumber) % 8);
-                    pMgmt->bInTIM = sFrame.pTIM->byVirtBitMap[uLocateByteIndex] & byTIMBitOn ? TRUE : FALSE;
+                    pMgmt->bInTIM = sFrame.pTIM->byVirtBitMap[uLocateByteIndex] & byTIMBitOn ? true : false;
                 }
                 else {
-                    pMgmt->bInTIM = FALSE;
+                    pMgmt->bInTIM = false;
                 };
             }
             else {
-                pMgmt->bInTIM = FALSE;
+                pMgmt->bInTIM = false;
             };
 
             if (pMgmt->bInTIM ||
                 (pMgmt->bMulticastTIM && (pMgmt->byDTIMCount == 0))) {
-                pMgmt->bInTIMWake = TRUE;
+                pMgmt->bInTIMWake = true;
                 // send out ps-poll packet
 //                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN:In TIM\n");
                 if (pMgmt->bInTIM) {
@@ -2221,14 +2222,14 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
 
             }
             else {
-                pMgmt->bInTIMWake = FALSE;
+                pMgmt->bInTIMWake = false;
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Not In TIM..\n");
-                if (pDevice->bPWBitOn == FALSE) {
+                if (pDevice->bPWBitOn == false) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Send Null Packet\n");
                     if (PSbSendNullPacket(pDevice))
-                        pDevice->bPWBitOn = TRUE;
+                        pDevice->bPWBitOn = true;
                 }
-                if(PSbConsiderPowerDown(pDevice, FALSE, FALSE)) {
+                if(PSbConsiderPowerDown(pDevice, false, false)) {
                    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "BCN: Power down now...\n");
                 };
             }
@@ -2246,7 +2247,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
             // adhoc mode:TSF updated only when beacon larger then local TSF
             if (bTSFLargeDiff && bTSFOffsetPostive &&
                 (pMgmt->eCurrState == WMAC_STATE_JOINTED))
-                bUpdateTSF = TRUE;
+                bUpdateTSF = true;
 
             // During dpc, already in spinlocked.
             if (BSSDBbIsSTAInNodeDB(pMgmt, sFrame.pHdr->sA3.abyAddr2, &uNodeIndex)) {
@@ -2259,7 +2260,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
                 RATEvParseMaxRate( (void *)pDevice,
                                    (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                                    NULL,
-                                   TRUE,
+                                   true,
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
@@ -2280,7 +2281,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
                 RATEvParseMaxRate( (void *)pDevice,
                                    (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                                    NULL,
-                                   TRUE,
+                                   true,
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wMaxBasicRate),
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate),
                                    &(pMgmt->sNodeDBTable[uNodeIndex].wSuppRate),
@@ -2300,7 +2301,7 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
 /*
                 pMgmt->sNodeDBTable[uNodeIndex].bShortSlotTime = WLAN_GET_CAP_INFO_SHORTSLOTTIME(*sFrame.pwCapInfo);
                 if(pMgmt->sNodeDBTable[uNodeIndex].wMaxSuppRate > RATE_11M)
-                       pMgmt->sNodeDBTable[uNodeIndex].bERPExist = TRUE;
+                       pMgmt->sNodeDBTable[uNodeIndex].bERPExist = true;
 */
             }
 
@@ -2308,11 +2309,11 @@ if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
             if (pMgmt->eCurrState == WMAC_STATE_STARTED) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Current IBSS State: [Started]........to: [Jointed] \n");
                 pMgmt->eCurrState = WMAC_STATE_JOINTED;
-                pDevice->bLinkPass = TRUE;
+                pDevice->bLinkPass = true;
                 if (netif_queue_stopped(pDevice->dev)){
                     netif_wake_queue(pDevice->dev);
                 }
-                pMgmt->sNodeDBTable[0].bActive = TRUE;
+                pMgmt->sNodeDBTable[0].bActive = true;
                 pMgmt->sNodeDBTable[0].uInActiveCount = 0;
 
             };
@@ -2392,16 +2393,16 @@ vMgrCreateOwnIBSS(
 {
     PSDevice            pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject        pMgmt = pDevice->pMgmt;
-    WORD                wMaxBasicRate;
-    WORD                wMaxSuppRate;
-    BYTE                byTopCCKBasicRate;
-    BYTE                byTopOFDMBasicRate;
+    unsigned short wMaxBasicRate;
+    unsigned short wMaxSuppRate;
+    unsigned char byTopCCKBasicRate;
+    unsigned char byTopOFDMBasicRate;
     QWORD               qwCurrTSF;
-    UINT                ii;
-    BYTE    abyRATE[] = {0x82, 0x84, 0x8B, 0x96, 0x24, 0x30, 0x48, 0x6C, 0x0C, 0x12, 0x18, 0x60};
-    BYTE    abyCCK_RATE[] = {0x82, 0x84, 0x8B, 0x96};
-    BYTE    abyOFDM_RATE[] = {0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
-    WORD                wSuppRate;
+    unsigned int ii;
+    unsigned char abyRATE[] = {0x82, 0x84, 0x8B, 0x96, 0x24, 0x30, 0x48, 0x6C, 0x0C, 0x12, 0x18, 0x60};
+    unsigned char abyCCK_RATE[] = {0x82, 0x84, 0x8B, 0x96};
+    unsigned char abyOFDM_RATE[] = {0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    unsigned short wSuppRate;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Create Basic Service Set .......\n");
 
@@ -2486,7 +2487,7 @@ vMgrCreateOwnIBSS(
     // set basic rate
 
     RATEvParseMaxRate((void *)pDevice, (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
-                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates, TRUE,
+                      (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates, true,
                       &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
                       &byTopCCKBasicRate, &byTopOFDMBasicRate);
 
@@ -2533,12 +2534,12 @@ vMgrCreateOwnIBSS(
     if (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) {
 
         // BSSID selected must be randomized as spec 11.1.3
-        pMgmt->abyCurrBSSID[5] = (BYTE) (LODWORD(qwCurrTSF)& 0x000000ff);
-        pMgmt->abyCurrBSSID[4] = (BYTE)((LODWORD(qwCurrTSF)& 0x0000ff00) >> 8);
-        pMgmt->abyCurrBSSID[3] = (BYTE)((LODWORD(qwCurrTSF)& 0x00ff0000) >> 16);
-        pMgmt->abyCurrBSSID[2] = (BYTE)((LODWORD(qwCurrTSF)& 0x00000ff0) >> 4);
-        pMgmt->abyCurrBSSID[1] = (BYTE)((LODWORD(qwCurrTSF)& 0x000ff000) >> 12);
-        pMgmt->abyCurrBSSID[0] = (BYTE)((LODWORD(qwCurrTSF)& 0x0ff00000) >> 20);
+        pMgmt->abyCurrBSSID[5] = (unsigned char) (LODWORD(qwCurrTSF)& 0x000000ff);
+        pMgmt->abyCurrBSSID[4] = (unsigned char)((LODWORD(qwCurrTSF)& 0x0000ff00) >> 8);
+        pMgmt->abyCurrBSSID[3] = (unsigned char)((LODWORD(qwCurrTSF)& 0x00ff0000) >> 16);
+        pMgmt->abyCurrBSSID[2] = (unsigned char)((LODWORD(qwCurrTSF)& 0x00000ff0) >> 4);
+        pMgmt->abyCurrBSSID[1] = (unsigned char)((LODWORD(qwCurrTSF)& 0x000ff000) >> 12);
+        pMgmt->abyCurrBSSID[0] = (unsigned char)((LODWORD(qwCurrTSF)& 0x0ff00000) >> 20);
         pMgmt->abyCurrBSSID[5] ^= pMgmt->abyMACAddr[0];
         pMgmt->abyCurrBSSID[4] ^= pMgmt->abyMACAddr[1];
         pMgmt->abyCurrBSSID[3] ^= pMgmt->abyMACAddr[2];
@@ -2611,7 +2612,7 @@ vMgrCreateOwnIBSS(
 
     CARDbSetBeaconPeriod(pMgmt->pAdapter, pMgmt->wIBSSBeaconPeriod);
     // set channel and clear NAV
-    CARDbSetChannel(pMgmt->pAdapter, pMgmt->uIBSSChannel);
+    set_channel(pMgmt->pAdapter, pMgmt->uIBSSChannel);
     pMgmt->uCurrChannel = pMgmt->uIBSSChannel;
 
     if (CARDbIsShortPreamble(pMgmt->pAdapter)) {
@@ -2620,7 +2621,7 @@ vMgrCreateOwnIBSS(
         pMgmt->wCurrCapInfo &= (~WLAN_SET_CAP_INFO_SHORTPREAMBLE(1));
     }
 
-    if ((pMgmt->b11hEnable == TRUE) &&
+    if ((pMgmt->b11hEnable == true) &&
         (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_SPECTRUMMNG(1);
     } else {
@@ -2661,20 +2662,20 @@ vMgrJoinBSSBegin(
     PSDevice     pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PKnownBSS       pCurr = NULL;
-    UINT            ii, uu;
+    unsigned int ii, uu;
     PWLAN_IE_SUPP_RATES pItemRates = NULL;
     PWLAN_IE_SUPP_RATES pItemExtRates = NULL;
     PWLAN_IE_SSID   pItemSSID;
-    UINT            uRateLen = WLAN_RATES_MAXLEN;
-    WORD            wMaxBasicRate = RATE_1M;
-    WORD            wMaxSuppRate = RATE_1M;
-    WORD            wSuppRate;
-    BYTE            byTopCCKBasicRate = RATE_1M;
-    BYTE            byTopOFDMBasicRate = RATE_1M;
+    unsigned int uRateLen = WLAN_RATES_MAXLEN;
+    unsigned short wMaxBasicRate = RATE_1M;
+    unsigned short wMaxSuppRate = RATE_1M;
+    unsigned short wSuppRate;
+    unsigned char byTopCCKBasicRate = RATE_1M;
+    unsigned char byTopOFDMBasicRate = RATE_1M;
 
 
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
-        if (pMgmt->sBSSList[ii].bActive == TRUE)
+        if (pMgmt->sBSSList[ii].bActive == true)
             break;
     }
 
@@ -2708,14 +2709,14 @@ vMgrJoinBSSBegin(
     // patch for CISCO migration mode
 /*
             if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
-                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == FALSE) {
+                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == false) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"No match RSN info. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n");
                     // encryption mode error
                     pMgmt->eCurrState = WMAC_STATE_IDLE;
                     return;
                 }
             } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
-                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == FALSE) {
+                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == false) {
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"No match RSN info. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n");
                     // encryption mode error
                     pMgmt->eCurrState = WMAC_STATE_IDLE;
@@ -2726,7 +2727,7 @@ vMgrJoinBSSBegin(
         }
 
 #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-	//if(pDevice->bWPASuppWextEnabled == TRUE)
+	//if(pDevice->bWPASuppWextEnabled == true)
             Encyption_Rebuild(pDevice, pCurr);
 #endif
         // Infrastructure BSS
@@ -2764,15 +2765,15 @@ vMgrJoinBSSBegin(
                                             uRateLen);
             // Stuffing Rate IE
             if ((pItemExtRates->len > 0) && (pItemRates->len < 8)) {
-                for (ii = 0; ii < (UINT)(8 - pItemRates->len); ) {
+                for (ii = 0; ii < (unsigned int)(8 - pItemRates->len); ) {
                     pItemRates->abyRates[pItemRates->len + ii] = pItemExtRates->abyRates[ii];
                     ii ++;
                     if (pItemExtRates->len <= ii)
                         break;
                 }
-                pItemRates->len += (BYTE)ii;
+                pItemRates->len += (unsigned char)ii;
                 if (pItemExtRates->len - ii > 0) {
-                    pItemExtRates->len -= (BYTE)ii;
+                    pItemExtRates->len -= (unsigned char)ii;
                     for (uu = 0; uu < pItemExtRates->len; uu ++) {
                         pItemExtRates->abyRates[uu] = pItemExtRates->abyRates[uu + ii];
                     }
@@ -2781,7 +2782,7 @@ vMgrJoinBSSBegin(
                 }
             }
 
-            RATEvParseMaxRate((void *)pDevice, pItemRates, pItemExtRates, TRUE,
+            RATEvParseMaxRate((void *)pDevice, pItemRates, pItemExtRates, true,
                               &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
                               &byTopCCKBasicRate, &byTopOFDMBasicRate);
 
@@ -2802,9 +2803,9 @@ vMgrJoinBSSBegin(
             // Add current BSS to Candidate list
             // This should only works for WPA2 BSS, and WPA2 BSS check must be done before.
             if (pMgmt->eAuthenMode == WMAC_AUTH_WPA2) {
-                BOOL bResult = bAdd_PMKID_Candidate((void *)pDevice, pMgmt->abyCurrBSSID, &pCurr->sRSNCapObj);
+                bool bResult = bAdd_PMKID_Candidate((void *)pDevice, pMgmt->abyCurrBSSID, &pCurr->sRSNCapObj);
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate: 1(%d)\n", bResult);
-                if (bResult == FALSE) {
+                if (bResult == false) {
                     vFlush_PMKID_Candidate((void *)pDevice);
                     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"vFlush_PMKID_Candidate: 4\n");
                     bAdd_PMKID_Candidate((void *)pDevice, pMgmt->abyCurrBSSID, &pCurr->sRSNCapObj);
@@ -2831,13 +2832,13 @@ vMgrJoinBSSBegin(
         if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
 
             if (pDevice->eEncryptionStatus == Ndis802_11Encryption2Enabled) {
-                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == FALSE) {
+                if (WPA_SearchRSN(0, WPA_TKIP, pCurr) == false) {
                     // encryption mode error
                     pMgmt->eCurrState = WMAC_STATE_IDLE;
                     return;
                 }
             } else if (pDevice->eEncryptionStatus == Ndis802_11Encryption3Enabled) {
-                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == FALSE) {
+                if (WPA_SearchRSN(0, WPA_AESCCMP, pCurr) == false) {
                     // encryption mode error
                     pMgmt->eCurrState = WMAC_STATE_IDLE;
                     return;
@@ -2868,7 +2869,7 @@ vMgrJoinBSSBegin(
                                                     WLAN_RATES_MAXLEN_11B);
             // set basic rate
             RATEvParseMaxRate((void *)pDevice, (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
-                              NULL, TRUE, &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
+                              NULL, true, &wMaxBasicRate, &wMaxSuppRate, &wSuppRate,
                               &byTopCCKBasicRate, &byTopOFDMBasicRate);
 
             pMgmt->wCurrCapInfo = pCurr->wCapInfo;
@@ -2883,7 +2884,7 @@ vMgrJoinBSSBegin(
             pMgmt->eCurrState = WMAC_STATE_STARTED;
             // Adopt BSS state in Adapter Device Object
             //pDevice->byOpMode = OP_MODE_ADHOC;
-//            pDevice->bLinkPass = TRUE;
+//            pDevice->bLinkPass = true;
 //            memcpy(pDevice->abyBSSID, pCurr->abyBSSID, WLAN_BSSID_LEN);
 
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Join IBSS ok:%02x-%02x-%02x-%02x-%02x-%02x \n",
@@ -2923,7 +2924,7 @@ static
 void
 s_vMgrSynchBSS (
     PSDevice      pDevice,
-    UINT          uBSSMode,
+    unsigned int uBSSMode,
     PKnownBSS     pCurr,
     PCMD_STATUS  pStatus
     )
@@ -2932,11 +2933,11 @@ s_vMgrSynchBSS (
     PSMgmtObject  pMgmt = pDevice->pMgmt;
 //    int     ii;
                                                      //1M,   2M,   5M,   11M,  18M,  24M,  36M,  54M
-    BYTE abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
-    BYTE abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
+    unsigned char abyCurrSuppRatesG[] = {WLAN_EID_SUPP_RATES, 8, 0x02, 0x04, 0x0B, 0x16, 0x24, 0x30, 0x48, 0x6C};
+    unsigned char abyCurrExtSuppRatesG[] = {WLAN_EID_EXTSUPP_RATES, 4, 0x0C, 0x12, 0x18, 0x60};
                                                            //6M,   9M,   12M,  48M
-    BYTE abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
-    BYTE abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
+    unsigned char abyCurrSuppRatesA[] = {WLAN_EID_SUPP_RATES, 8, 0x0C, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C};
+    unsigned char abyCurrSuppRatesB[] = {WLAN_EID_SUPP_RATES, 4, 0x02, 0x04, 0x0B, 0x16};
 
 
     *pStatus = CMD_STATUS_FAILURE;
@@ -2944,7 +2945,7 @@ s_vMgrSynchBSS (
     if (s_bCipherMatch(pCurr,
                        pDevice->eEncryptionStatus,
                        &(pMgmt->byCSSPK),
-                       &(pMgmt->byCSSGK)) == FALSE) {
+                       &(pMgmt->byCSSGK)) == false) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "s_bCipherMatch Fail .......\n");
         return;
     }
@@ -2958,12 +2959,12 @@ s_vMgrSynchBSS (
     }
 
     // Init the BSS informations
-    pDevice->bCCK = TRUE;
-    pDevice->bProtectMode = FALSE;
+    pDevice->bCCK = true;
+    pDevice->bProtectMode = false;
     MACvDisableProtectMD(pDevice->PortOffset);
-    pDevice->bBarkerPreambleMd = FALSE;
+    pDevice->bBarkerPreambleMd = false;
     MACvDisableBarkerPreambleMd(pDevice->PortOffset);
-    pDevice->bNonERPPresent = FALSE;
+    pDevice->bNonERPPresent = false;
     pDevice->byPreambleType = 0;
     pDevice->wBasicRate = 0;
     // Set Basic Rate
@@ -3046,12 +3047,12 @@ s_vMgrSynchBSS (
                                 pCurr->sERP.byERP,
                                 pMgmt->abyCurrSuppRates,
                                 pMgmt->abyCurrExtSuppRates
-                            ) != TRUE) {
+                            ) != true) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "<----s_bSynchBSS Set Phy Mode Fail [%d]\n", ePhyType);
         return;
     }
     // set channel and clear NAV
-    if (CARDbSetChannel(pMgmt->pAdapter, pCurr->uChannel) == FALSE) {
+    if (set_channel(pMgmt->pAdapter, pCurr->uChannel) == false) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "<----s_bSynchBSS Set Channel [%d]\n", pCurr->uChannel);
         return;
     }
@@ -3077,7 +3078,7 @@ s_vMgrSynchBSS (
     pMgmt->uCurrChannel = pCurr->uChannel;
     pMgmt->eCurrentPHYMode = ePhyType;
     pMgmt->byERPContext = pCurr->sERP.byERP;
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Sync:Set to channel = [%d]\n", (INT)pCurr->uChannel);
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Sync:Set to channel = [%d]\n", (int)pCurr->uChannel);
 
 
     *pStatus = CMD_STATUS_SUCCESS;
@@ -3094,18 +3095,18 @@ s_vMgrSynchBSS (
  )
  {
   PSMgmtObject  pMgmt = &(pDevice->sMgmtObj);
- // UINT            ii , uSameBssidNum=0;
+ // unsigned int ii , uSameBssidNum=0;
 
         //  for (ii = 0; ii < MAX_BSS_NUM; ii++) {
           //   if (pMgmt->sBSSList[ii].bActive &&
-            //      IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+            //      !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
              //       uSameBssidNum++;
                //   }
            // }
   //   if( uSameBssidNum>=2) {	 //we only check AP in hidden sssid  mode
         if ((pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||           //networkmanager 0.7.0 does not give the pairwise-key selsection,
              (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {         // so we need re-selsect it according to real pairwise-key info.
-               if(pCurr->bWPAValid == TRUE)  {   //WPA-PSK
+               if(pCurr->bWPAValid == true)  {   //WPA-PSK
                           pMgmt->eAuthenMode = WMAC_AUTH_WPAPSK;
 		    if(pCurr->abyPKType[0] == WPA_TKIP) {
      		        pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;    //TKIP
@@ -3116,7 +3117,7 @@ s_vMgrSynchBSS (
                           PRINT_K("Encyption_Rebuild--->ssid reset config to [WPAPSK-AES]\n");
      		     }
                	}
-               else if(pCurr->bWPA2Valid == TRUE) {  //WPA2-PSK
+               else if(pCurr->bWPA2Valid == true) {  //WPA2-PSK
                          pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK;
 		       if(pCurr->abyCSSPK[0] == WLAN_11i_CSS_TKIP) {
       		           pDevice->eEncryptionStatus = Ndis802_11Encryption2Enabled;     //TKIP
@@ -3151,13 +3152,13 @@ s_vMgrFormatTIM(
     PWLAN_IE_TIM pTIM
     )
 {
-    BYTE        byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
-    BYTE        byMap;
-    UINT        ii, jj;
-    BOOL        bStartFound = FALSE;
-    BOOL        bMulticast = FALSE;
-    WORD        wStartIndex = 0;
-    WORD        wEndIndex = 0;
+    unsigned char byMask[8] = {1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80};
+    unsigned char byMap;
+    unsigned int ii, jj;
+    bool bStartFound = false;
+    bool bMulticast = false;
+    unsigned short wStartIndex = 0;
+    unsigned short wEndIndex = 0;
 
 
     // Find size of partial virtual bitmap
@@ -3167,13 +3168,13 @@ s_vMgrFormatTIM(
             // Mask out the broadcast bit which is indicated separately.
             bMulticast = (byMap & byMask[0]) != 0;
             if(bMulticast) {
-               pMgmt->sNodeDBTable[0].bRxPSPoll = TRUE;
+               pMgmt->sNodeDBTable[0].bRxPSPoll = true;
             }
             byMap = 0;
         }
         if (byMap) {
             if (!bStartFound) {
-                bStartFound = TRUE;
+                bStartFound = true;
                 wStartIndex = ii;
             }
             wEndIndex = ii;
@@ -3224,30 +3225,30 @@ PSTxMgmtPacket
 s_MgrMakeBeacon(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wCurrBeaconPeriod,
-    UINT uCurrChannel,
-    WORD wCurrATIMWinodw,
+    unsigned short wCurrCapInfo,
+    unsigned short wCurrBeaconPeriod,
+    unsigned int uCurrChannel,
+    unsigned short wCurrATIMWinodw,
     PWLAN_IE_SSID pCurrSSID,
-    PBYTE pCurrBSSID,
+    unsigned char *pCurrBSSID,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     )
 {
     PSTxMgmtPacket      pTxPacket = NULL;
     WLAN_FR_BEACON      sFrame;
-    BYTE                abyBroadcastAddr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-    PBYTE               pbyBuffer;
-    UINT                uLength = 0;
+    unsigned char abyBroadcastAddr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+    unsigned char *pbyBuffer;
+    unsigned int uLength = 0;
     PWLAN_IE_IBSS_DFS   pIBSSDFS = NULL;
-    UINT                ii;
+    unsigned int ii;
 
     // prepare beacon frame
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_BEACON_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     // Setup the sFrame structure.
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_BEACON_FR_MAXLEN;
     vMgrEncodeBeacon(&sFrame);
     // Setup the header
@@ -3258,7 +3259,7 @@ s_MgrMakeBeacon(
         ));
 
     if (pDevice->bEnablePSMode) {
-        sFrame.pHdr->sA3.wFrameCtl |= cpu_to_le16((WORD)WLAN_SET_FC_PWRMGT(1));
+        sFrame.pHdr->sA3.wFrameCtl |= cpu_to_le16((unsigned short)WLAN_SET_FC_PWRMGT(1));
     }
 
     memcpy( sFrame.pHdr->sA3.abyAddr1, abyBroadcastAddr, WLAN_ADDR_LEN);
@@ -3286,7 +3287,7 @@ s_MgrMakeBeacon(
         sFrame.len += (1) + WLAN_IEHDR_LEN;
         sFrame.pDSParms->byElementID = WLAN_EID_DS_PARMS;
         sFrame.pDSParms->len = 1;
-        sFrame.pDSParms->byCurrChannel = (BYTE)uCurrChannel;
+        sFrame.pDSParms->byCurrChannel = (unsigned char)uCurrChannel;
     }
     // TIM field
     if (pMgmt->eCurrMode == WMAC_MODE_ESS_AP) {
@@ -3329,22 +3330,22 @@ s_MgrMakeBeacon(
             // Pairwise Key Cipher Suite
             sFrame.pRSNWPA->wPKCount = 0;
             // Auth Key Management Suite
-            *((PWORD)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
+            *((unsigned short *)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
             sFrame.pRSNWPA->len +=2;
 
             // RSN Capabilites
-            *((PWORD)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
+            *((unsigned short *)(sFrame.pBuf + sFrame.len + sFrame.pRSNWPA->len))=0;
             sFrame.pRSNWPA->len +=2;
             sFrame.len += sFrame.pRSNWPA->len + WLAN_IEHDR_LEN;
         }
     }
 
-    if ((pMgmt->b11hEnable == TRUE) &&
+    if ((pMgmt->b11hEnable == true) &&
         (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
         // Country IE
-        pbyBuffer = (PBYTE)(sFrame.pBuf + sFrame.len);
-        CARDvSetCountryIE(pMgmt->pAdapter, pbyBuffer);
-        CARDvSetCountryInfo(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
+        pbyBuffer = (unsigned char *)(sFrame.pBuf + sFrame.len);
+        set_country_IE(pMgmt->pAdapter, pbyBuffer);
+        set_country_info(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
         uLength += ((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN;
         pbyBuffer += (((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN);
         // Power Constrain IE
@@ -3353,12 +3354,12 @@ s_MgrMakeBeacon(
         ((PWLAN_IE_PW_CONST) pbyBuffer)->byPower = 0;
         pbyBuffer += (1) + WLAN_IEHDR_LEN;
         uLength += (1) + WLAN_IEHDR_LEN;
-        if (pMgmt->bSwitchChannel == TRUE) {
+        if (pMgmt->bSwitchChannel == true) {
             // Channel Switch IE
             ((PWLAN_IE_CH_SW) pbyBuffer)->byElementID = WLAN_EID_CH_SWITCH;
             ((PWLAN_IE_CH_SW) pbyBuffer)->len = 3;
             ((PWLAN_IE_CH_SW) pbyBuffer)->byMode = 1;
-            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = CARDbyGetChannelNumber(pMgmt->pAdapter, pMgmt->byNewChannel);
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = get_channel_number(pMgmt->pAdapter, pMgmt->byNewChannel);
             ((PWLAN_IE_CH_SW) pbyBuffer)->byCount = 0;
             pbyBuffer += (3) + WLAN_IEHDR_LEN;
             uLength += (3) + WLAN_IEHDR_LEN;
@@ -3382,7 +3383,7 @@ s_MgrMakeBeacon(
             pbyBuffer += (7) + WLAN_IEHDR_LEN;
             uLength += (7) + WLAN_IEHDR_LEN;
             for(ii=CB_MAX_CHANNEL_24G+1; ii<=CB_MAX_CHANNEL; ii++ ) {
-                if (CARDbGetChannelMapInfo(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == TRUE) {
+                if (get_channel_map_info(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == true) {
                     pbyBuffer += 2;
                     uLength += 2;
                     pIBSSDFS->len += 2;
@@ -3398,11 +3399,11 @@ s_MgrMakeBeacon(
         sFrame.pERP->byElementID = WLAN_EID_ERP;
         sFrame.pERP->len = 1;
         sFrame.pERP->byContext = 0;
-        if (pDevice->bProtectMode == TRUE)
+        if (pDevice->bProtectMode == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_USE_PROTECTION;
-        if (pDevice->bNonERPPresent == TRUE)
+        if (pDevice->bNonERPPresent == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_NONERP_PRESENT;
-        if (pDevice->bBarkerPreambleMd == TRUE)
+        if (pDevice->bBarkerPreambleMd == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_BARKER_MODE;
     }
     if (((PWLAN_IE_SUPP_RATES)pCurrExtSuppRates)->len != 0) {
@@ -3414,7 +3415,7 @@ s_MgrMakeBeacon(
              );
     }
     // hostapd wpa/wpa2 IE
-    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == TRUE)) {
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == true)) {
          if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
              if (pMgmt->wWPAIELen != 0) {
                  sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
@@ -3453,31 +3454,31 @@ PSTxMgmtPacket
 s_MgrMakeProbeResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wCurrBeaconPeriod,
-    UINT uCurrChannel,
-    WORD wCurrATIMWinodw,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wCurrBeaconPeriod,
+    unsigned int uCurrChannel,
+    unsigned short wCurrATIMWinodw,
+    unsigned char *pDstAddr,
     PWLAN_IE_SSID pCurrSSID,
-    PBYTE pCurrBSSID,
+    unsigned char *pCurrBSSID,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates,
-    BYTE byPHYType
+    unsigned char byPHYType
     )
 {
     PSTxMgmtPacket      pTxPacket = NULL;
     WLAN_FR_PROBERESP   sFrame;
-    PBYTE               pbyBuffer;
-    UINT                uLength = 0;
+    unsigned char *pbyBuffer;
+    unsigned int uLength = 0;
     PWLAN_IE_IBSS_DFS   pIBSSDFS = NULL;
-    UINT                ii;
+    unsigned int ii;
 
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_PROBERESP_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     // Setup the sFrame structure.
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_PROBERESP_FR_MAXLEN;
     vMgrEncodeProbeResponse(&sFrame);
     // Setup the header
@@ -3493,7 +3494,7 @@ s_MgrMakeProbeResponse(
     *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
 
     if (byPHYType == BB_TYPE_11B) {
-        *sFrame.pwCapInfo &= cpu_to_le16((WORD)~(WLAN_SET_CAP_INFO_SHORTSLOTTIME(1)));
+        *sFrame.pwCapInfo &= cpu_to_le16((unsigned short)~(WLAN_SET_CAP_INFO_SHORTSLOTTIME(1)));
     }
 
     // Copy SSID
@@ -3518,7 +3519,7 @@ s_MgrMakeProbeResponse(
         sFrame.len += (1) + WLAN_IEHDR_LEN;
         sFrame.pDSParms->byElementID = WLAN_EID_DS_PARMS;
         sFrame.pDSParms->len = 1;
-        sFrame.pDSParms->byCurrChannel = (BYTE)uCurrChannel;
+        sFrame.pDSParms->byCurrChannel = (unsigned char)uCurrChannel;
     }
 
     if (pMgmt->eCurrMode != WMAC_MODE_ESS_AP) {
@@ -3535,20 +3536,20 @@ s_MgrMakeProbeResponse(
         sFrame.pERP->byElementID = WLAN_EID_ERP;
         sFrame.pERP->len = 1;
         sFrame.pERP->byContext = 0;
-        if (pDevice->bProtectMode == TRUE)
+        if (pDevice->bProtectMode == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_USE_PROTECTION;
-        if (pDevice->bNonERPPresent == TRUE)
+        if (pDevice->bNonERPPresent == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_NONERP_PRESENT;
-        if (pDevice->bBarkerPreambleMd == TRUE)
+        if (pDevice->bBarkerPreambleMd == true)
             sFrame.pERP->byContext |= WLAN_EID_ERP_BARKER_MODE;
     }
 
-    if ((pMgmt->b11hEnable == TRUE) &&
+    if ((pMgmt->b11hEnable == true) &&
         (pMgmt->eCurrentPHYMode == PHY_TYPE_11A)) {
         // Country IE
-        pbyBuffer = (PBYTE)(sFrame.pBuf + sFrame.len);
-        CARDvSetCountryIE(pMgmt->pAdapter, pbyBuffer);
-        CARDvSetCountryInfo(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
+        pbyBuffer = (unsigned char *)(sFrame.pBuf + sFrame.len);
+        set_country_IE(pMgmt->pAdapter, pbyBuffer);
+        set_country_info(pMgmt->pAdapter, PHY_TYPE_11A, pbyBuffer);
         uLength += ((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN;
         pbyBuffer += (((PWLAN_IE_COUNTRY) pbyBuffer)->len + WLAN_IEHDR_LEN);
         // Power Constrain IE
@@ -3557,12 +3558,12 @@ s_MgrMakeProbeResponse(
         ((PWLAN_IE_PW_CONST) pbyBuffer)->byPower = 0;
         pbyBuffer += (1) + WLAN_IEHDR_LEN;
         uLength += (1) + WLAN_IEHDR_LEN;
-        if (pMgmt->bSwitchChannel == TRUE) {
+        if (pMgmt->bSwitchChannel == true) {
             // Channel Switch IE
             ((PWLAN_IE_CH_SW) pbyBuffer)->byElementID = WLAN_EID_CH_SWITCH;
             ((PWLAN_IE_CH_SW) pbyBuffer)->len = 3;
             ((PWLAN_IE_CH_SW) pbyBuffer)->byMode = 1;
-            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = CARDbyGetChannelNumber(pMgmt->pAdapter, pMgmt->byNewChannel);
+            ((PWLAN_IE_CH_SW) pbyBuffer)->byChannel = get_channel_number(pMgmt->pAdapter, pMgmt->byNewChannel);
             ((PWLAN_IE_CH_SW) pbyBuffer)->byCount = 0;
             pbyBuffer += (3) + WLAN_IEHDR_LEN;
             uLength += (3) + WLAN_IEHDR_LEN;
@@ -3586,7 +3587,7 @@ s_MgrMakeProbeResponse(
             pbyBuffer += (7) + WLAN_IEHDR_LEN;
             uLength += (7) + WLAN_IEHDR_LEN;
             for(ii=CB_MAX_CHANNEL_24G+1; ii<=CB_MAX_CHANNEL; ii++ ) {
-                if (CARDbGetChannelMapInfo(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == TRUE) {
+                if (get_channel_map_info(pMgmt->pAdapter, ii, pbyBuffer, pbyBuffer+1) == true) {
                     pbyBuffer += 2;
                     uLength += 2;
                     pIBSSDFS->len += 2;
@@ -3607,7 +3608,7 @@ s_MgrMakeProbeResponse(
     }
 
     // hostapd wpa/wpa2 IE
-    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == TRUE)) {
+    if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) && (pDevice->bEnableHostapd == true)) {
          if (pMgmt->eAuthenMode == WMAC_AUTH_WPANONE) {
              if (pMgmt->wWPAIELen != 0) {
                  sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
@@ -3642,9 +3643,9 @@ PSTxMgmtPacket
 s_MgrMakeAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pDAddr,
-    WORD wCurrCapInfo,
-    WORD wListenInterval,
+    unsigned char *pDAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wListenInterval,
     PWLAN_IE_SSID pCurrSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -3652,15 +3653,15 @@ s_MgrMakeAssocRequest(
 {
     PSTxMgmtPacket      pTxPacket = NULL;
     WLAN_FR_ASSOCREQ    sFrame;
-    PBYTE               pbyIEs;
-    PBYTE               pbyRSN;
+    unsigned char *pbyIEs;
+    unsigned char *pbyRSN;
 
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     // Setup the sFrame structure.
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_ASSOCREQ_FR_MAXLEN;
     // format fixed field frame structure
     vMgrEncodeAssocRequest(&sFrame);
@@ -3709,7 +3710,7 @@ s_MgrMakeAssocRequest(
     pbyIEs += pCurrRates->len + WLAN_IEHDR_LEN;
 
     // for 802.11h
-    if (pMgmt->b11hEnable == TRUE) {
+    if (pMgmt->b11hEnable == true) {
         if (sFrame.pCurrPowerCap == NULL) {
             sFrame.pCurrPowerCap = (PWLAN_IE_PW_CAP)(sFrame.pBuf + sFrame.len);
             sFrame.len += (2 + WLAN_IEHDR_LEN);
@@ -3722,7 +3723,7 @@ s_MgrMakeAssocRequest(
         }
         if (sFrame.pCurrSuppCh == NULL) {
             sFrame.pCurrSuppCh = (PWLAN_IE_SUPP_CH)(sFrame.pBuf + sFrame.len);
-            sFrame.len += CARDbySetSupportChannels(pMgmt->pAdapter,(PBYTE)sFrame.pCurrSuppCh);
+            sFrame.len += set_support_channels(pMgmt->pAdapter,(unsigned char *)sFrame.pCurrSuppCh);
         }
     }
 
@@ -3765,7 +3766,7 @@ s_MgrMakeAssocRequest(
             sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_NONE;
         }
         // Auth Key Management Suite
-        pbyRSN = (PBYTE)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
+        pbyRSN = (unsigned char *)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
         *pbyRSN++=0x01;
         *pbyRSN++=0x00;
         *pbyRSN++=0x00;
@@ -3799,8 +3800,8 @@ s_MgrMakeAssocRequest(
     } else if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
                 (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
                (pMgmt->pCurrBSS != NULL)) {
-        UINT                ii;
-        PWORD               pwPMKID;
+        unsigned int ii;
+        unsigned short *pwPMKID;
 
         // WPA IE
         sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
@@ -3854,7 +3855,7 @@ s_MgrMakeAssocRequest(
         sFrame.pRSN->len +=6;
 
         // RSN Capabilites
-        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == true) {
             memcpy(&sFrame.pRSN->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
         } else {
             sFrame.pRSN->abyRSN[16] = 0;
@@ -3862,10 +3863,10 @@ s_MgrMakeAssocRequest(
         }
         sFrame.pRSN->len +=2;
 
-        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == TRUE) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
+        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == true) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
             // RSN PMKID
             pbyRSN = &sFrame.pRSN->abyRSN[18];
-            pwPMKID = (PWORD)pbyRSN; // Point to PMKID count
+            pwPMKID = (unsigned short *)pbyRSN; // Point to PMKID count
             *pwPMKID = 0;            // Initialize PMKID count
             pbyRSN += 2;             // Point to PMKID list
             for (ii = 0; ii < pDevice->gsPMKID.BSSIDInfoCount; ii++) {
@@ -3917,9 +3918,9 @@ PSTxMgmtPacket
 s_MgrMakeReAssocRequest(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    PBYTE pDAddr,
-    WORD wCurrCapInfo,
-    WORD wListenInterval,
+    unsigned char *pDAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wListenInterval,
     PWLAN_IE_SSID pCurrSSID,
     PWLAN_IE_SUPP_RATES pCurrRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
@@ -3927,15 +3928,15 @@ s_MgrMakeReAssocRequest(
 {
     PSTxMgmtPacket      pTxPacket = NULL;
     WLAN_FR_REASSOCREQ  sFrame;
-    PBYTE               pbyIEs;
-    PBYTE               pbyRSN;
+    unsigned char *pbyIEs;
+    unsigned char *pbyRSN;
 
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset( pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_REASSOCREQ_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     /* Setup the sFrame structure. */
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_REASSOCREQ_FR_MAXLEN;
 
     // format fixed field frame structure
@@ -4024,7 +4025,7 @@ s_MgrMakeReAssocRequest(
             sFrame.pRSNWPA->PKSList[0].abyOUI[3] = WPA_NONE;
         }
         // Auth Key Management Suite
-        pbyRSN = (PBYTE)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
+        pbyRSN = (unsigned char *)(sFrame.pBuf + sFrame.len + 2 + sFrame.pRSNWPA->len);
         *pbyRSN++=0x01;
         *pbyRSN++=0x00;
         *pbyRSN++=0x00;
@@ -4055,8 +4056,8 @@ s_MgrMakeReAssocRequest(
     } else if (((pMgmt->eAuthenMode == WMAC_AUTH_WPA2) ||
                 (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
                (pMgmt->pCurrBSS != NULL)) {
-        UINT                ii;
-        PWORD               pwPMKID;
+        unsigned int ii;
+        unsigned short *pwPMKID;
 
         /* WPA IE */
         sFrame.pRSN = (PWLAN_IE_RSN)(sFrame.pBuf + sFrame.len);
@@ -4110,7 +4111,7 @@ s_MgrMakeReAssocRequest(
         sFrame.pRSN->len +=6;
 
         // RSN Capabilites
-        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == true) {
             memcpy(&sFrame.pRSN->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
         } else {
             sFrame.pRSN->abyRSN[16] = 0;
@@ -4118,10 +4119,10 @@ s_MgrMakeReAssocRequest(
         }
         sFrame.pRSN->len +=2;
 
-        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == TRUE) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
+        if ((pDevice->gsPMKID.BSSIDInfoCount > 0) && (pDevice->bRoaming == true) && (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
             // RSN PMKID
             pbyRSN = &sFrame.pRSN->abyRSN[18];
-            pwPMKID = (PWORD)pbyRSN; // Point to PMKID count
+            pwPMKID = (unsigned short *)pbyRSN; // Point to PMKID count
             *pwPMKID = 0;            // Initialize PMKID count
             pbyRSN += 2;             // Point to PMKID list
             for (ii = 0; ii < pDevice->gsPMKID.BSSIDInfoCount; ii++) {
@@ -4169,10 +4170,10 @@ PSTxMgmtPacket
 s_MgrMakeAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wAssocStatus,
-    WORD wAssocAID,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wAssocStatus,
+    unsigned short wAssocAID,
+    unsigned char *pDstAddr,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     )
@@ -4183,9 +4184,9 @@ s_MgrMakeAssocResponse(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     // Setup the sFrame structure
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_REASSOCRESP_FR_MAXLEN;
     vMgrEncodeAssocResponse(&sFrame);
     // Setup the header
@@ -4200,7 +4201,7 @@ s_MgrMakeAssocResponse(
 
     *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
     *sFrame.pwStatus = cpu_to_le16(wAssocStatus);
-    *sFrame.pwAid = cpu_to_le16((WORD)(wAssocAID | BIT14 | BIT15));
+    *sFrame.pwAid = cpu_to_le16((unsigned short)(wAssocAID | BIT14 | BIT15));
 
     // Copy the rate set
     sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
@@ -4243,10 +4244,10 @@ PSTxMgmtPacket
 s_MgrMakeReAssocResponse(
     PSDevice pDevice,
     PSMgmtObject pMgmt,
-    WORD wCurrCapInfo,
-    WORD wAssocStatus,
-    WORD wAssocAID,
-    PBYTE pDstAddr,
+    unsigned short wCurrCapInfo,
+    unsigned short wAssocStatus,
+    unsigned short wAssocAID,
+    unsigned char *pDstAddr,
     PWLAN_IE_SUPP_RATES pCurrSuppRates,
     PWLAN_IE_SUPP_RATES pCurrExtSuppRates
     )
@@ -4257,9 +4258,9 @@ s_MgrMakeReAssocResponse(
 
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyMgmtPacketPool;
     memset(pTxPacket, 0, sizeof(STxMgmtPacket) + WLAN_ASSOCREQ_FR_MAXLEN);
-    pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
+    pTxPacket->p80211Header = (PUWLAN_80211HDR)((unsigned char *)pTxPacket + sizeof(STxMgmtPacket));
     // Setup the sFrame structure
-    sFrame.pBuf = (PBYTE)pTxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pTxPacket->p80211Header;
     sFrame.len = WLAN_REASSOCRESP_FR_MAXLEN;
     vMgrEncodeReassocResponse(&sFrame);
     // Setup the header
@@ -4274,7 +4275,7 @@ s_MgrMakeReAssocResponse(
 
     *sFrame.pwCapInfo = cpu_to_le16(wCurrCapInfo);
     *sFrame.pwStatus = cpu_to_le16(wAssocStatus);
-    *sFrame.pwAid = cpu_to_le16((WORD)(wAssocAID | BIT14 | BIT15));
+    *sFrame.pwAid = cpu_to_le16((unsigned short)(wAssocAID | BIT14 | BIT15));
 
     // Copy the rate set
     sFrame.pSuppRates = (PWLAN_IE_SUPP_RATES)(sFrame.pBuf + sFrame.len);
@@ -4322,16 +4323,16 @@ s_vMgrRxProbeResponse(
 {
     PKnownBSS           pBSSList = NULL;
     WLAN_FR_PROBERESP   sFrame;
-    BYTE                byCurrChannel = pRxPacket->byRxChannel;
+    unsigned char byCurrChannel = pRxPacket->byRxChannel;
     ERPObject           sERP;
-    BYTE                byIEChannel = 0;
-    BOOL                bChannelHit = TRUE;
+    unsigned char byIEChannel = 0;
+    bool bChannelHit = true;
 
 
     memset(&sFrame, 0, sizeof(WLAN_FR_PROBERESP));
     // decode the frame
     sFrame.len = pRxPacket->cbMPDULen;
-    sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+    sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
     vMgrDecodeProbeResponse(&sFrame);
 
     if ((sFrame.pqwTimestamp == 0) ||
@@ -4350,29 +4351,29 @@ s_vMgrRxProbeResponse(
     if (sFrame.pDSParms != 0) {
         if (byCurrChannel > CB_MAX_CHANNEL_24G) {
             // channel remapping to
-            byIEChannel = CARDbyGetChannelMapping(pMgmt->pAdapter, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
+            byIEChannel = get_channel_mapping(pMgmt->pAdapter, sFrame.pDSParms->byCurrChannel, PHY_TYPE_11A);
         } else {
             byIEChannel = sFrame.pDSParms->byCurrChannel;
         }
         if (byCurrChannel != byIEChannel) {
             // adjust channel info. bcs we rcv adjcent channel pakckets
-            bChannelHit = FALSE;
+            bChannelHit = false;
             byCurrChannel = byIEChannel;
         }
     } else {
         // no DS channel info
-        bChannelHit = TRUE;
+        bChannelHit = true;
     }
 
 //2008-0730-01<Add>by MikeLiu
-if(ChannelExceedZoneType(pDevice,byCurrChannel)==TRUE)
+if(ChannelExceedZoneType(pDevice,byCurrChannel)==true)
       return;
 
     if (sFrame.pERP != NULL) {
         sERP.byERP = sFrame.pERP->byContext;
-        sERP.bERPExist = TRUE;
+        sERP.bERPExist = true;
     } else {
-        sERP.bERPExist = FALSE;
+        sERP.bERPExist = false;
         sERP.byERP = 0;
     }
 
@@ -4448,7 +4449,7 @@ s_vMgrRxProbeRequest(
     WLAN_FR_PROBEREQ    sFrame;
     CMD_STATUS          Status;
     PSTxMgmtPacket      pTxPacket;
-    BYTE                byPHYType = BB_TYPE_11B;
+    unsigned char byPHYType = BB_TYPE_11B;
 
     // STA in Ad-hoc mode: when latest TBTT beacon transmit success,
     // STA have to response this request.
@@ -4458,7 +4459,7 @@ s_vMgrRxProbeRequest(
         memset(&sFrame, 0, sizeof(WLAN_FR_PROBEREQ));
         // decode the frame
         sFrame.len = pRxPacket->cbMPDULen;
-        sFrame.pBuf = (PBYTE)pRxPacket->p80211Header;
+        sFrame.pBuf = (unsigned char *)pRxPacket->p80211Header;
         vMgrDecodeProbeRequest(&sFrame);
 /*
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Probe request rx:MAC addr:%02x-%02x-%02x=%02x-%02x-%02x \n",
@@ -4495,7 +4496,7 @@ s_vMgrRxProbeRequest(
                       0,
                       sFrame.pHdr->sA3.abyAddr2,
                       (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
-                      (PBYTE)pMgmt->abyCurrBSSID,
+                      (unsigned char *)pMgmt->abyCurrBSSID,
                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                       (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates,
                        byPHYType
@@ -4542,8 +4543,8 @@ vMgrRxManagePacket(
      )
 {
     PSDevice    pDevice = (PSDevice)hDeviceContext;
-    BOOL        bInScan = FALSE;
-    UINT        uNodeIndex = 0;
+    bool bInScan = false;
+    unsigned int uNodeIndex = 0;
     NODE_STATE  eNodeState = 0;
     CMD_STATUS  Status;
 
@@ -4577,7 +4578,7 @@ vMgrRxManagePacket(
         case WLAN_FSTYPE_ASSOCRESP:
             // Frame Clase = 2
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx assocresp1\n");
-            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, FALSE);
+            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, false);
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx assocresp2\n");
             break;
 
@@ -4603,7 +4604,7 @@ vMgrRxManagePacket(
         case WLAN_FSTYPE_REASSOCRESP:
             // Frame Clase = 2
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx reassocresp\n");
-            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, TRUE);
+            s_vMgrRxAssocResponse(pDevice, pMgmt, pRxPacket, true);
             break;
 
         case WLAN_FSTYPE_PROBEREQ:
@@ -4623,7 +4624,7 @@ vMgrRxManagePacket(
             // Frame Clase = 0
             //DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "rx beacon\n");
             if (pMgmt->eScanState != WMAC_NO_SCANNING) {
-                bInScan = TRUE;
+                bInScan = true;
             };
             s_vMgrRxBeacon(pDevice, pMgmt, pRxPacket, bInScan);
             break;
@@ -4680,10 +4681,10 @@ vMgrRxManagePacket(
  *  Prepare beacon to send
  *
  * Return Value:
- *    TRUE if success; FALSE if failed.
+ *    true if success; false if failed.
  *
 -*/
-BOOL
+bool
 bMgrPrepareBeaconToSend(
     void *hDeviceContext,
     PSMgmtObject pMgmt
@@ -4692,7 +4693,7 @@ bMgrPrepareBeaconToSend(
     PSDevice            pDevice = (PSDevice)hDeviceContext;
     PSTxMgmtPacket      pTxPacket;
 
-//    pDevice->bBeaconBufReady = FALSE;
+//    pDevice->bBeaconBufReady = false;
     if (pDevice->bEncryptionEnable || pDevice->bEnable8021x){
         pMgmt->wCurrCapInfo |= WLAN_SET_CAP_INFO_PRIVACY(1);
     }
@@ -4708,18 +4709,18 @@ bMgrPrepareBeaconToSend(
                   pMgmt->uCurrChannel,
                   pMgmt->wCurrATIMWindow, //0,
                   (PWLAN_IE_SSID)pMgmt->abyCurrSSID,
-                  (PBYTE)pMgmt->abyCurrBSSID,
+                  (unsigned char *)pMgmt->abyCurrBSSID,
                   (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrSuppRates,
                   (PWLAN_IE_SUPP_RATES)pMgmt->abyCurrExtSuppRates
                 );
 
     if ((pMgmt->eCurrMode == WMAC_MODE_IBSS_STA) &&
         (pMgmt->abyCurrBSSID[0] == 0))
-        return FALSE;
+        return false;
 
     csBeacon_xmit(pDevice, pTxPacket);
 
-    return TRUE;
+    return true;
 }
 
 
@@ -4741,7 +4742,7 @@ static
 void
 s_vMgrLogStatus(
     PSMgmtObject pMgmt,
-    WORD  wStatus
+    unsigned short wStatus
     )
 {
     switch( wStatus ){
@@ -4807,24 +4808,24 @@ s_vMgrLogStatus(
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 bAdd_PMKID_Candidate (
     void *hDeviceContext,
-    PBYTE          pbyBSSID,
+    unsigned char *pbyBSSID,
     PSRSNCapObject psRSNCapObj
     )
 {
     PSDevice         pDevice = (PSDevice)hDeviceContext;
     PPMKID_CANDIDATE pCandidateList;
-    UINT             ii = 0;
+    unsigned int ii = 0;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"bAdd_PMKID_Candidate START: (%d)\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
 
     if ((pDevice == NULL) || (pbyBSSID == NULL) || (psRSNCapObj == NULL))
-        return FALSE;
+        return false;
 
     if (pDevice->gsPMKIDCandidate.NumCandidates >= MAX_PMKIDLIST)
-        return FALSE;
+        return false;
 
 
 
@@ -4832,18 +4833,18 @@ bAdd_PMKID_Candidate (
     for (ii = 0; ii < pDevice->gsPMKIDCandidate.NumCandidates; ii++) {
         pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[ii];
         if ( !memcmp(pCandidateList->BSSID, pbyBSSID, ETH_ALEN)) {
-            if ((psRSNCapObj->bRSNCapExist == TRUE) && (psRSNCapObj->wRSNCap & BIT0)) {
+            if ((psRSNCapObj->bRSNCapExist == true) && (psRSNCapObj->wRSNCap & BIT0)) {
                 pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
             } else {
                 pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
             }
-            return TRUE;
+            return true;
         }
     }
 
     // New Candidate
     pCandidateList = &pDevice->gsPMKIDCandidate.CandidateList[pDevice->gsPMKIDCandidate.NumCandidates];
-    if ((psRSNCapObj->bRSNCapExist == TRUE) && (psRSNCapObj->wRSNCap & BIT0)) {
+    if ((psRSNCapObj->bRSNCapExist == true) && (psRSNCapObj->wRSNCap & BIT0)) {
         pCandidateList->Flags |= NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED;
     } else {
         pCandidateList->Flags &= ~(NDIS_802_11_PMKID_CANDIDATE_PREAUTH_ENABLED);
@@ -4851,7 +4852,7 @@ bAdd_PMKID_Candidate (
     memcpy(pCandidateList->BSSID, pbyBSSID, ETH_ALEN);
     pDevice->gsPMKIDCandidate.NumCandidates++;
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"NumCandidates:%d\n", (int)pDevice->gsPMKIDCandidate.NumCandidates);
-    return TRUE;
+    return true;
 }
 
 /*
@@ -4881,20 +4882,20 @@ vFlush_PMKID_Candidate (
     memset(&pDevice->gsPMKIDCandidate, 0, sizeof(SPMKIDCandidateEvent));
 }
 
-static BOOL
+static bool
 s_bCipherMatch (
     PKnownBSS                        pBSSNode,
     NDIS_802_11_ENCRYPTION_STATUS    EncStatus,
-    PBYTE                           pbyCCSPK,
-    PBYTE                           pbyCCSGK
+    unsigned char *pbyCCSPK,
+    unsigned char *pbyCCSGK
     )
 {
-    BYTE byMulticastCipher = KEY_CTL_INVALID;
-    BYTE byCipherMask = 0x00;
+    unsigned char byMulticastCipher = KEY_CTL_INVALID;
+    unsigned char byCipherMask = 0x00;
     int i;
 
     if (pBSSNode == NULL)
-        return FALSE;
+        return false;
 
     // check cap. of BSS
     if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
@@ -4904,7 +4905,7 @@ s_bCipherMatch (
     }
 
     if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
-        (pBSSNode->bWPA2Valid == TRUE) &&
+        (pBSSNode->bWPA2Valid == true) &&
           //20080123-01,<Add> by Einsn Liu
         ((EncStatus == Ndis802_11Encryption3Enabled)||(EncStatus == Ndis802_11Encryption2Enabled))) {
         //WPA2
@@ -4938,7 +4939,7 @@ s_bCipherMatch (
         }
 
     } else if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
-                (pBSSNode->bWPAValid == TRUE) &&
+                (pBSSNode->bWPAValid == true) &&
                 ((EncStatus == Ndis802_11Encryption3Enabled) || (EncStatus == Ndis802_11Encryption2Enabled))) {
         //WPA
         // check Group Key Cipher
@@ -4978,9 +4979,9 @@ s_bCipherMatch (
             (byCipherMask == 0)) {
             *pbyCCSGK = KEY_CTL_WEP;
             *pbyCCSPK = KEY_CTL_NONE;
-            return TRUE;
+            return true;
         } else {
-            return FALSE;
+            return false;
         }
 
     } else if (EncStatus == Ndis802_11Encryption2Enabled) {
@@ -4988,45 +4989,45 @@ s_bCipherMatch (
             (byCipherMask == 0)) {
             *pbyCCSGK = KEY_CTL_TKIP;
             *pbyCCSPK = KEY_CTL_NONE;
-            return TRUE;
+            return true;
         } else if ((byMulticastCipher == KEY_CTL_WEP) &&
                    ((byCipherMask & 0x02) != 0)) {
             *pbyCCSGK = KEY_CTL_WEP;
             *pbyCCSPK = KEY_CTL_TKIP;
-            return TRUE;
+            return true;
         } else if ((byMulticastCipher == KEY_CTL_TKIP) &&
                    ((byCipherMask & 0x02) != 0)) {
             *pbyCCSGK = KEY_CTL_TKIP;
             *pbyCCSPK = KEY_CTL_TKIP;
-            return TRUE;
+            return true;
         } else {
-            return FALSE;
+            return false;
         }
     } else if (EncStatus == Ndis802_11Encryption3Enabled) {
         if ((byMulticastCipher == KEY_CTL_CCMP) &&
             (byCipherMask == 0)) {
             // When CCMP is enable, "Use group cipher suite" shall not be a valid option.
-            return FALSE;
+            return false;
         } else if ((byMulticastCipher == KEY_CTL_WEP) &&
                    ((byCipherMask & 0x04) != 0)) {
             *pbyCCSGK = KEY_CTL_WEP;
             *pbyCCSPK = KEY_CTL_CCMP;
-            return TRUE;
+            return true;
         } else if ((byMulticastCipher == KEY_CTL_TKIP) &&
                    ((byCipherMask & 0x04) != 0)) {
             *pbyCCSGK = KEY_CTL_TKIP;
             *pbyCCSPK = KEY_CTL_CCMP;
-            return TRUE;
+            return true;
         } else if ((byMulticastCipher == KEY_CTL_CCMP) &&
                    ((byCipherMask & 0x04) != 0)) {
             *pbyCCSGK = KEY_CTL_CCMP;
             *pbyCCSPK = KEY_CTL_CCMP;
-            return TRUE;
+            return true;
         } else {
-            return FALSE;
+            return false;
         }
     }
-    return TRUE;
+    return true;
 }
 
 
diff --git a/drivers/staging/vt6655/wmgr.h b/drivers/staging/vt6655/wmgr.h
index 9ae7e0d55bc..141e80b843a 100644
--- a/drivers/staging/vt6655/wmgr.h
+++ b/drivers/staging/vt6655/wmgr.h
@@ -83,47 +83,47 @@
 
 /*---------------------  Export Types  ------------------------------*/
 #define timer_expire(timer,next_tick)   mod_timer(&timer, RUN_AT(next_tick))
-typedef void (*TimerFunction)(ULONG);
+typedef void (*TimerFunction)(unsigned long);
 
 
 //+++ NDIS related
 
-typedef UCHAR   NDIS_802_11_MAC_ADDRESS[6];
+typedef unsigned char NDIS_802_11_MAC_ADDRESS[6];
 typedef struct _NDIS_802_11_AI_REQFI
 {
-    USHORT Capabilities;
-    USHORT ListenInterval;
+    unsigned short Capabilities;
+    unsigned short ListenInterval;
     NDIS_802_11_MAC_ADDRESS  CurrentAPAddress;
 } NDIS_802_11_AI_REQFI, *PNDIS_802_11_AI_REQFI;
 
 typedef struct _NDIS_802_11_AI_RESFI
 {
-    USHORT Capabilities;
-    USHORT StatusCode;
-    USHORT AssociationId;
+    unsigned short Capabilities;
+    unsigned short StatusCode;
+    unsigned short AssociationId;
 } NDIS_802_11_AI_RESFI, *PNDIS_802_11_AI_RESFI;
 
 typedef struct _NDIS_802_11_ASSOCIATION_INFORMATION
 {
-    ULONG                   Length;
-    USHORT                  AvailableRequestFixedIEs;
+    unsigned long Length;
+    unsigned short          AvailableRequestFixedIEs;
     NDIS_802_11_AI_REQFI    RequestFixedIEs;
-    ULONG                   RequestIELength;
-    ULONG                   OffsetRequestIEs;
-    USHORT                  AvailableResponseFixedIEs;
+    unsigned long RequestIELength;
+    unsigned long OffsetRequestIEs;
+    unsigned short          AvailableResponseFixedIEs;
     NDIS_802_11_AI_RESFI    ResponseFixedIEs;
-    ULONG                   ResponseIELength;
-    ULONG                   OffsetResponseIEs;
+    unsigned long ResponseIELength;
+    unsigned long OffsetResponseIEs;
 } NDIS_802_11_ASSOCIATION_INFORMATION, *PNDIS_802_11_ASSOCIATION_INFORMATION;
 
 
 
 typedef struct tagSAssocInfo {
     NDIS_802_11_ASSOCIATION_INFORMATION     AssocInfo;
-    BYTE                                    abyIEs[WLAN_BEACON_FR_MAXLEN+WLAN_BEACON_FR_MAXLEN];
+    unsigned char abyIEs[WLAN_BEACON_FR_MAXLEN+WLAN_BEACON_FR_MAXLEN];
     // store ReqIEs set by OID_802_11_ASSOCIATION_INFORMATION
-    ULONG                                   RequestIELength;
-    BYTE                                    abyReqIEs[WLAN_BEACON_FR_MAXLEN];
+    unsigned long RequestIELength;
+    unsigned char abyReqIEs[WLAN_BEACON_FR_MAXLEN];
 } SAssocInfo, *PSAssocInfo;
 //---
 
@@ -224,8 +224,8 @@ typedef enum tagWMAC_POWER_MODE {
 typedef struct tagSTxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
-    UINT                cbMPDULen;
-    UINT                cbPayloadLen;
+    unsigned int cbMPDULen;
+    unsigned int cbPayloadLen;
 
 } STxMgmtPacket, *PSTxMgmtPacket;
 
@@ -235,12 +235,12 @@ typedef struct tagSRxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
     QWORD               qwLocalTSF;
-    UINT                cbMPDULen;
-    UINT                cbPayloadLen;
-    UINT                uRSSI;
-    BYTE                bySQ;
-    BYTE                byRxRate;
-    BYTE                byRxChannel;
+    unsigned int cbMPDULen;
+    unsigned int cbPayloadLen;
+    unsigned int uRSSI;
+    unsigned char bySQ;
+    unsigned char byRxRate;
+    unsigned char byRxChannel;
 
 } SRxMgmtPacket, *PSRxMgmtPacket;
 
@@ -251,7 +251,7 @@ typedef struct tagSMgmtObject
 
     void *                   pAdapter;
     // MAC address
-    BYTE                    abyMACAddr[WLAN_ADDR_LEN];
+    unsigned char abyMACAddr[WLAN_ADDR_LEN];
 
     // Configuration Mode
     WMAC_CONFIG_MODE        eConfigMode; // MAC pre-configed mode
@@ -264,86 +264,86 @@ typedef struct tagSMgmtObject
     WMAC_BSS_STATE          eCurrState;  // MAC current BSS state
 
     PKnownBSS               pCurrBSS;
-    BYTE                    byCSSGK;
-    BYTE                    byCSSPK;
+    unsigned char byCSSGK;
+    unsigned char byCSSPK;
 
-//    BYTE                    abyNewSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
-//    BYTE                    abyNewExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+//    unsigned char abyNewSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
+//    unsigned char abyNewExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN];
 
     // Current state vars
-    UINT                    uCurrChannel;
-    BYTE                    abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE                    abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE                    abyCurrSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    BYTE                    abyCurrBSSID[WLAN_BSSID_LEN];
-    WORD                    wCurrCapInfo;
-    WORD                    wCurrAID;
-    WORD                    wCurrATIMWindow;
-    WORD                    wCurrBeaconPeriod;
-    BOOL                    bIsDS;
-    BYTE                    byERPContext;
+    unsigned int	uCurrChannel;
+    unsigned char abyCurrSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char abyCurrExtSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char abyCurrSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    unsigned char abyCurrBSSID[WLAN_BSSID_LEN];
+    unsigned short wCurrCapInfo;
+    unsigned short wCurrAID;
+    unsigned short wCurrATIMWindow;
+    unsigned short wCurrBeaconPeriod;
+    bool bIsDS;
+    unsigned char byERPContext;
 
     CMD_STATE               eCommandState;
-    UINT                    uScanChannel;
+    unsigned int	uScanChannel;
 
     // Desire joinning BSS vars
-    BYTE                    abyDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    BYTE                    abyDesireBSSID[WLAN_BSSID_LEN];
+    unsigned char abyDesireSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    unsigned char abyDesireBSSID[WLAN_BSSID_LEN];
 
     // Adhoc or AP configuration vars
-  //BYTE                    abyAdHocSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    WORD                    wIBSSBeaconPeriod;
-    WORD                    wIBSSATIMWindow;
-    UINT                    uIBSSChannel;
-    BYTE                    abyIBSSSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
-    BYTE                    byAPBBType;
-    BYTE                    abyWPAIE[MAX_WPA_IE_LEN];
-    WORD                    wWPAIELen;
-
-    UINT                    uAssocCount;
-    BOOL                    bMoreData;
+  //unsigned char abyAdHocSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    unsigned short wIBSSBeaconPeriod;
+    unsigned short wIBSSATIMWindow;
+    unsigned int	uIBSSChannel;
+    unsigned char abyIBSSSuppRates[WLAN_IEHDR_LEN + WLAN_RATES_MAXLEN + 1];
+    unsigned char byAPBBType;
+    unsigned char abyWPAIE[MAX_WPA_IE_LEN];
+    unsigned short wWPAIELen;
+
+    unsigned int	uAssocCount;
+    bool bMoreData;
 
     // Scan state vars
     WMAC_SCAN_STATE         eScanState;
     WMAC_SCAN_TYPE          eScanType;
-    UINT                    uScanStartCh;
-    UINT                    uScanEndCh;
-    WORD                    wScanSteps;
-    UINT                    uScanBSSType;
+    unsigned int	uScanStartCh;
+    unsigned int	uScanEndCh;
+    unsigned short wScanSteps;
+    unsigned int	uScanBSSType;
     // Desire scannig vars
-    BYTE                    abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-    BYTE                    abyScanBSSID[WLAN_BSSID_LEN];
+    unsigned char abyScanSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
+    unsigned char abyScanBSSID[WLAN_BSSID_LEN];
 
     // Privacy
     WMAC_AUTHENTICATION_MODE eAuthenMode;
     WMAC_ENCRYPTION_MODE    eEncryptionMode;
-    BOOL                    bShareKeyAlgorithm;
-    BYTE                    abyChallenge[WLAN_CHALLENGE_LEN];
-    BOOL                    bPrivacyInvoked;
+    bool bShareKeyAlgorithm;
+    unsigned char abyChallenge[WLAN_CHALLENGE_LEN];
+    bool bPrivacyInvoked;
 
     // Received beacon state vars
-    BOOL                    bInTIM;
-    BOOL                    bMulticastTIM;
-    BYTE                    byDTIMCount;
-    BYTE                    byDTIMPeriod;
+    bool bInTIM;
+    bool bMulticastTIM;
+    unsigned char byDTIMCount;
+    unsigned char byDTIMPeriod;
 
     // Power saving state vars
     WMAC_POWER_MODE         ePSMode;
-    WORD                    wListenInterval;
-    WORD                    wCountToWakeUp;
-    BOOL                    bInTIMWake;
-    PBYTE                   pbyPSPacketPool;
-    BYTE                    byPSPacketPool[sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN];
-    BOOL                    bRxBeaconInTBTTWake;
-    BYTE                    abyPSTxMap[MAX_NODE_NUM + 1];
+    unsigned short wListenInterval;
+    unsigned short wCountToWakeUp;
+    bool bInTIMWake;
+    unsigned char *pbyPSPacketPool;
+    unsigned char byPSPacketPool[sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN];
+    bool bRxBeaconInTBTTWake;
+    unsigned char abyPSTxMap[MAX_NODE_NUM + 1];
 
     // management command related
-    UINT                    uCmdBusy;
-    UINT                    uCmdHostAPBusy;
+    unsigned int	uCmdBusy;
+    unsigned int	uCmdHostAPBusy;
 
     // management packet pool
-    PBYTE                   pbyMgmtPacketPool;
-    BYTE                    byMgmtPacketPool[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+    unsigned char *pbyMgmtPacketPool;
+    unsigned char byMgmtPacketPool[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
 
 
     // One second callback timer
@@ -366,7 +366,7 @@ typedef struct tagSMgmtObject
 
     // WPA2 PMKID Cache
     SPMKIDCache             gsPMKIDCache;
-    BOOL                    bRoaming;
+    bool bRoaming;
 
     // rate fall back vars
 
@@ -377,16 +377,16 @@ typedef struct tagSMgmtObject
 
 
     // for 802.11h
-    BOOL                    b11hEnable;
-    BOOL                    bSwitchChannel;
-    BYTE                    byNewChannel;
+    bool b11hEnable;
+    bool bSwitchChannel;
+    unsigned char byNewChannel;
     PWLAN_IE_MEASURE_REP    pCurrMeasureEIDRep;
-    UINT                    uLengthOfRepEIDs;
-    BYTE                    abyCurrentMSRReq[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
-    BYTE                    abyCurrentMSRRep[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
-    BYTE                    abyIECountry[WLAN_A3FR_MAXLEN];
-    BYTE                    abyIBSSDFSOwner[6];
-    BYTE                    byIBSSDFSRecovery;
+    unsigned int	uLengthOfRepEIDs;
+    unsigned char abyCurrentMSRReq[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+    unsigned char abyCurrentMSRRep[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
+    unsigned char abyIECountry[WLAN_A3FR_MAXLEN];
+    unsigned char abyIBSSDFSOwner[6];
+    unsigned char byIBSSDFSRecovery;
 
     struct sk_buff  skb;
 
@@ -432,8 +432,8 @@ void
 vMgrDisassocBeginSta(
     void *hDeviceContext,
     PSMgmtObject pMgmt,
-    PBYTE  abyDestAddress,
-    WORD    wReason,
+    unsigned char *abyDestAddress,
+    unsigned short wReason,
     PCMD_STATUS pStatus
     );
 
@@ -475,22 +475,22 @@ void
 vMgrDeAuthenBeginSta(
     void *hDeviceContext,
     PSMgmtObject  pMgmt,
-    PBYTE   abyDestAddress,
-    WORD    wReason,
+    unsigned char *abyDestAddress,
+    unsigned short wReason,
     PCMD_STATUS pStatus
     );
 
-BOOL
+bool
 bMgrPrepareBeaconToSend(
     void *hDeviceContext,
     PSMgmtObject pMgmt
     );
 
 
-BOOL
+bool
 bAdd_PMKID_Candidate (
     void *hDeviceContext,
-    PBYTE          pbyBSSID,
+    unsigned char *pbyBSSID,
     PSRSNCapObject psRSNCapObj
     );
 
diff --git a/drivers/staging/vt6655/wpa.c b/drivers/staging/vt6655/wpa.c
index da5c814e200..61ac46fa505 100644
--- a/drivers/staging/vt6655/wpa.c
+++ b/drivers/staging/vt6655/wpa.c
@@ -45,12 +45,12 @@
 /*---------------------  Static Variables  --------------------------*/
 static int          msglevel                =MSG_LEVEL_INFO;
 
-const BYTE abyOUI00[4] = { 0x00, 0x50, 0xf2, 0x00 };
-const BYTE abyOUI01[4] = { 0x00, 0x50, 0xf2, 0x01 };
-const BYTE abyOUI02[4] = { 0x00, 0x50, 0xf2, 0x02 };
-const BYTE abyOUI03[4] = { 0x00, 0x50, 0xf2, 0x03 };
-const BYTE abyOUI04[4] = { 0x00, 0x50, 0xf2, 0x04 };
-const BYTE abyOUI05[4] = { 0x00, 0x50, 0xf2, 0x05 };
+const unsigned char abyOUI00[4] = { 0x00, 0x50, 0xf2, 0x00 };
+const unsigned char abyOUI01[4] = { 0x00, 0x50, 0xf2, 0x01 };
+const unsigned char abyOUI02[4] = { 0x00, 0x50, 0xf2, 0x02 };
+const unsigned char abyOUI03[4] = { 0x00, 0x50, 0xf2, 0x03 };
+const unsigned char abyOUI04[4] = { 0x00, 0x50, 0xf2, 0x04 };
+const unsigned char abyOUI05[4] = { 0x00, 0x50, 0xf2, 0x05 };
 
 
 /*+
@@ -83,9 +83,9 @@ WPA_ClearRSN (
     pBSSList->wAuthCount = 0;
     pBSSList->byDefaultK_as_PK = 0;
     pBSSList->byReplayIdx = 0;
-    pBSSList->sRSNCapObj.bRSNCapExist = FALSE;
+    pBSSList->sRSNCapObj.bRSNCapExist = false;
     pBSSList->sRSNCapObj.wRSNCap = 0;
-    pBSSList->bWPAValid = FALSE;
+    pBSSList->bWPAValid = false;
 }
 
 
@@ -112,7 +112,7 @@ WPA_ParseRSN (
 {
     PWLAN_IE_RSN_AUTH  pIE_RSN_Auth = NULL;
     int                i, j, m, n = 0;
-    PBYTE              pbyCaps;
+    unsigned char *pbyCaps;
 
     WPA_ClearRSN(pBSSList);
 
@@ -148,7 +148,7 @@ WPA_ParseRSN (
         {
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
-            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
+            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(unsigned char)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -166,7 +166,7 @@ WPA_ParseRSN (
                     break;
                 //DBG_PRN_GRP14(("abyPKType[%d]: %X\n", j-1, pBSSList->abyPKType[j-1]));
             } //for
-            pBSSList->wPKCount = (WORD)j;
+            pBSSList->wPKCount = (unsigned short)j;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d\n", pBSSList->wPKCount);
         }
 
@@ -180,7 +180,7 @@ WPA_ParseRSN (
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
-            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
+            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(unsigned char)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
@@ -195,7 +195,7 @@ WPA_ParseRSN (
                 //DBG_PRN_GRP14(("abyAuthType[%d]: %X\n", j-1, pBSSList->abyAuthType[j-1]));
             }
             if(j > 0)
-                pBSSList->wAuthCount = (WORD)j;
+                pBSSList->wAuthCount = (unsigned short)j;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d\n", pBSSList->wAuthCount);
         }
 
@@ -207,17 +207,17 @@ WPA_ParseRSN (
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"14+4+(m+n)*4: %d\n", 14+4+(m+n)*4);
 
             if(pRSN->len+2 >= 14+4+(m+n)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*n)+Cap(2)
-                pbyCaps = (PBYTE)pIE_RSN_Auth->AuthKSList[n].abyOUI;
+                pbyCaps = (unsigned char *)pIE_RSN_Auth->AuthKSList[n].abyOUI;
                 pBSSList->byDefaultK_as_PK = (*pbyCaps) & WPA_GROUPFLAG;
                 pBSSList->byReplayIdx = 2 << ((*pbyCaps >> WPA_REPLAYBITSSHIFT) & WPA_REPLAYBITS);
-                pBSSList->sRSNCapObj.bRSNCapExist = TRUE;
-                pBSSList->sRSNCapObj.wRSNCap = *(PWORD)pbyCaps;
+                pBSSList->sRSNCapObj.bRSNCapExist = true;
+                pBSSList->sRSNCapObj.wRSNCap = *(unsigned short *)pbyCaps;
                 //DBG_PRN_GRP14(("pbyCaps: %X\n", *pbyCaps));
                 //DBG_PRN_GRP14(("byDefaultK_as_PK: %X\n", pBSSList->byDefaultK_as_PK));
                 //DBG_PRN_GRP14(("byReplayIdx: %X\n", pBSSList->byReplayIdx));
             }
         }
-        pBSSList->bWPAValid = TRUE;
+        pBSSList->bWPAValid = true;
     }
 }
 
@@ -237,24 +237,24 @@ WPA_ParseRSN (
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 WPA_SearchRSN (
-    BYTE                byCmd,
-    BYTE                byEncrypt,
+    unsigned char byCmd,
+    unsigned char byEncrypt,
     PKnownBSS        pBSSList
     )
 {
     int ii;
-    BYTE byPKType = WPA_NONE;
+    unsigned char byPKType = WPA_NONE;
 
-    if (pBSSList->bWPAValid == FALSE)
-        return FALSE;
+    if (pBSSList->bWPAValid == false)
+        return false;
 
     switch(byCmd) {
     case 0:
 
         if (byEncrypt != pBSSList->byGKType)
-            return FALSE;
+            return false;
 
         if (pBSSList->wPKCount > 0) {
             for (ii = 0; ii < pBSSList->wPKCount; ii ++) {
@@ -268,9 +268,9 @@ WPA_SearchRSN (
                      byPKType = WPA_WEP104;
             }
             if (byEncrypt != byPKType)
-                return FALSE;
+                return false;
         }
-        return TRUE;
+        return true;
 //        if (pBSSList->wAuthCount > 0)
 //            for (ii=0; ii < pBSSList->wAuthCount; ii ++)
 //                if (byAuth == pBSSList->abyAuthType[ii])
@@ -280,7 +280,7 @@ WPA_SearchRSN (
     default:
         break;
     }
-    return FALSE;
+    return false;
 }
 
 /*+
@@ -297,20 +297,20 @@ WPA_SearchRSN (
  * Return Value: none.
  *
 -*/
-BOOL
+bool
 WPAb_Is_RSN (
     PWLAN_IE_RSN_EXT pRSN
     )
 {
     if (pRSN == NULL)
-        return FALSE;
+        return false;
 
     if ((pRSN->len >= 6) && // oui1(4)+ver(2)
         (pRSN->byElementID == WLAN_EID_RSN_WPA) &&  !memcmp(pRSN->abyOUI, abyOUI01, 4) &&
         (pRSN->wVersion == 1)) {
-        return TRUE;
+        return true;
     }
     else
-        return FALSE;
+        return false;
 }
 
diff --git a/drivers/staging/vt6655/wpa.h b/drivers/staging/vt6655/wpa.h
index 80d990b09d2..921fd7ae9d3 100644
--- a/drivers/staging/vt6655/wpa.h
+++ b/drivers/staging/vt6655/wpa.h
@@ -69,14 +69,14 @@ WPA_ParseRSN(
     PWLAN_IE_RSN_EXT pRSN
     );
 
-BOOL
+bool
 WPA_SearchRSN(
-    BYTE                byCmd,
-    BYTE                byEncrypt,
+    unsigned char byCmd,
+    unsigned char byEncrypt,
     PKnownBSS        pBSSList
     );
 
-BOOL
+bool
 WPAb_Is_RSN(
     PWLAN_IE_RSN_EXT pRSN
     );
diff --git a/drivers/staging/vt6655/wpa2.c b/drivers/staging/vt6655/wpa2.c
index 7a42a0aad7d..805164bed7e 100644
--- a/drivers/staging/vt6655/wpa2.c
+++ b/drivers/staging/vt6655/wpa2.c
@@ -42,14 +42,14 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 /*---------------------  Static Variables  --------------------------*/
 
-const BYTE abyOUIGK[4]      = { 0x00, 0x0F, 0xAC, 0x00 };
-const BYTE abyOUIWEP40[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
-const BYTE abyOUIWEP104[4]  = { 0x00, 0x0F, 0xAC, 0x05 };
-const BYTE abyOUITKIP[4]    = { 0x00, 0x0F, 0xAC, 0x02 };
-const BYTE abyOUICCMP[4]    = { 0x00, 0x0F, 0xAC, 0x04 };
+const unsigned char abyOUIGK[4]      = { 0x00, 0x0F, 0xAC, 0x00 };
+const unsigned char abyOUIWEP40[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
+const unsigned char abyOUIWEP104[4]  = { 0x00, 0x0F, 0xAC, 0x05 };
+const unsigned char abyOUITKIP[4]    = { 0x00, 0x0F, 0xAC, 0x02 };
+const unsigned char abyOUICCMP[4]    = { 0x00, 0x0F, 0xAC, 0x04 };
 
-const BYTE abyOUI8021X[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
-const BYTE abyOUIPSK[4]     = { 0x00, 0x0F, 0xAC, 0x02 };
+const unsigned char abyOUI8021X[4]   = { 0x00, 0x0F, 0xAC, 0x01 };
+const unsigned char abyOUIPSK[4]     = { 0x00, 0x0F, 0xAC, 0x02 };
 
 
 /*---------------------  Static Functions  --------------------------*/
@@ -79,7 +79,7 @@ WPA2_ClearRSN (
 {
     int ii;
 
-    pBSSNode->bWPA2Valid = FALSE;
+    pBSSNode->bWPA2Valid = false;
 
     pBSSNode->byCSSGK = WLAN_11i_CSS_CCMP;
     for (ii=0; ii < 4; ii ++)
@@ -88,7 +88,7 @@ WPA2_ClearRSN (
     for (ii=0; ii < 4; ii ++)
         pBSSNode->abyAKMSSAuthType[ii] = WLAN_11i_AKMSS_802_1X;
     pBSSNode->wAKMSSAuthCount = 1;
-    pBSSNode->sRSNCapObj.bRSNCapExist = FALSE;
+    pBSSNode->sRSNCapObj.bRSNCapExist = false;
     pBSSNode->sRSNCapObj.wRSNCap = 0;
 }
 
@@ -114,9 +114,9 @@ WPA2vParseRSN (
     )
 {
     int                 i, j;
-    WORD                m = 0, n = 0;
-    PBYTE               pbyOUI;
-    BOOL                bUseGK = FALSE;
+    unsigned short m = 0, n = 0;
+    unsigned char *pbyOUI;
+    bool bUseGK = false;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"WPA2_ParseRSN: [%d]\n", pRSN->len);
 
@@ -124,7 +124,7 @@ WPA2vParseRSN (
 
     if (pRSN->len == 2) { // ver(2)
         if ((pRSN->byElementID == WLAN_EID_RSN) && (pRSN->wVersion == 1)) {
-            pBSSNode->bWPA2Valid = TRUE;
+            pBSSNode->bWPA2Valid = true;
         }
         return;
     }
@@ -159,21 +159,21 @@ WPA2vParseRSN (
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"802.11i CSS: %X\n", pBSSNode->byCSSGK);
 
         if (pRSN->len == 6) {
-            pBSSNode->bWPA2Valid = TRUE;
+            pBSSNode->bWPA2Valid = true;
             return;
         }
 
         if (pRSN->len >= 8) { // ver(2) + GK(4) + PK count(2)
-            pBSSNode->wCSSPKCount = *((PWORD) &(pRSN->abyRSN[4]));
+            pBSSNode->wCSSPKCount = *((unsigned short *) &(pRSN->abyRSN[4]));
             j = 0;
             pbyOUI = &(pRSN->abyRSN[6]);
 
-            for (i = 0; (i < pBSSNode->wCSSPKCount) && (j < sizeof(pBSSNode->abyCSSPK)/sizeof(BYTE)); i++) {
+            for (i = 0; (i < pBSSNode->wCSSPKCount) && (j < sizeof(pBSSNode->abyCSSPK)/sizeof(unsigned char)); i++) {
 
                 if (pRSN->len >= 8+i*4+4) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*i)
                     if ( !memcmp(pbyOUI, abyOUIGK, 4)) {
                         pBSSNode->abyCSSPK[j++] = WLAN_11i_CSS_USE_GROUP;
-                        bUseGK = TRUE;
+                        bUseGK = true;
                     } else if ( !memcmp(pbyOUI, abyOUIWEP40, 4)) {
                         // Invialid CSS, continue to parsing
                     } else if ( !memcmp(pbyOUI, abyOUITKIP, 4)) {
@@ -195,7 +195,7 @@ WPA2vParseRSN (
                     break;
             } //for
 
-            if (bUseGK == TRUE) {
+            if (bUseGK == true) {
                 if (j != 1) {
                     // invalid CSS, This should be only PK CSS.
                     return;
@@ -209,17 +209,17 @@ WPA2vParseRSN (
                 // invalid CSS, No valid PK.
                 return;
             }
-            pBSSNode->wCSSPKCount = (WORD)j;
+            pBSSNode->wCSSPKCount = (unsigned short)j;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wCSSPKCount: %d\n", pBSSNode->wCSSPKCount);
         }
 
-        m = *((PWORD) &(pRSN->abyRSN[4]));
+        m = *((unsigned short *) &(pRSN->abyRSN[4]));
 
         if (pRSN->len >= 10+m*4) { // ver(2) + GK(4) + PK count(2) + PKS(4*m) + AKMSS count(2)
-            pBSSNode->wAKMSSAuthCount = *((PWORD) &(pRSN->abyRSN[6+4*m]));;
+            pBSSNode->wAKMSSAuthCount = *((unsigned short *) &(pRSN->abyRSN[6+4*m]));;
             j = 0;
             pbyOUI = &(pRSN->abyRSN[8+4*m]);
-            for (i = 0; (i < pBSSNode->wAKMSSAuthCount) && (j < sizeof(pBSSNode->abyAKMSSAuthType)/sizeof(BYTE)); i++) {
+            for (i = 0; (i < pBSSNode->wAKMSSAuthCount) && (j < sizeof(pBSSNode->abyAKMSSAuthType)/sizeof(unsigned char)); i++) {
                 if (pRSN->len >= 10+(m+i)*4+4) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*m)+AKMSS(2)+AKS(4*i)
                     if ( !memcmp(pbyOUI, abyOUI8021X, 4))
                         pBSSNode->abyAKMSSAuthType[j++] = WLAN_11i_AKMSS_802_1X;
@@ -232,17 +232,17 @@ WPA2vParseRSN (
                 } else
                     break;
             }
-            pBSSNode->wAKMSSAuthCount = (WORD)j;
+            pBSSNode->wAKMSSAuthCount = (unsigned short)j;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAKMSSAuthCount: %d\n", pBSSNode->wAKMSSAuthCount);
 
-            n = *((PWORD) &(pRSN->abyRSN[6+4*m]));;
+            n = *((unsigned short *) &(pRSN->abyRSN[6+4*m]));;
             if (pRSN->len >= 12+4*m+4*n) { // ver(2)+GK(4)+PKCnt(2)+PKS(4*m)+AKMSSCnt(2)+AKMSS(4*n)+Cap(2)
-                pBSSNode->sRSNCapObj.bRSNCapExist = TRUE;
-                pBSSNode->sRSNCapObj.wRSNCap = *((PWORD) &(pRSN->abyRSN[8+4*m+4*n]));
+                pBSSNode->sRSNCapObj.bRSNCapExist = true;
+                pBSSNode->sRSNCapObj.wRSNCap = *((unsigned short *) &(pRSN->abyRSN[8+4*m+4*n]));
             }
         }
         //ignore PMKID lists bcs only (Re)Assocrequest has this field
-        pBSSNode->bWPA2Valid = TRUE;
+        pBSSNode->bWPA2Valid = true;
     }
 }
 
@@ -261,16 +261,16 @@ WPA2vParseRSN (
  * Return Value: length of IEs.
  *
 -*/
-UINT
+unsigned int
 WPA2uSetIEs(
     void *pMgmtHandle,
     PWLAN_IE_RSN pRSNIEs
     )
 {
     PSMgmtObject    pMgmt = (PSMgmtObject) pMgmtHandle;
-    PBYTE           pbyBuffer = NULL;
-    UINT            ii = 0;
-    PWORD           pwPMKID = NULL;
+    unsigned char *pbyBuffer = NULL;
+    unsigned int ii = 0;
+    unsigned short *pwPMKID = NULL;
 
     if (pRSNIEs == NULL) {
         return(0);
@@ -279,7 +279,7 @@ WPA2uSetIEs(
          (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) &&
         (pMgmt->pCurrBSS != NULL)) {
         /* WPA2 IE */
-        pbyBuffer = (PBYTE) pRSNIEs;
+        pbyBuffer = (unsigned char *) pRSNIEs;
         pRSNIEs->byElementID = WLAN_EID_RSN;
         pRSNIEs->len = 6; //Version(2)+GK(4)
         pRSNIEs->wVersion = 1;
@@ -330,7 +330,7 @@ WPA2uSetIEs(
         pRSNIEs->len +=6;
 
         // RSN Capabilites
-        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == TRUE) {
+        if (pMgmt->pCurrBSS->sRSNCapObj.bRSNCapExist == true) {
             memcpy(&pRSNIEs->abyRSN[16], &pMgmt->pCurrBSS->sRSNCapObj.wRSNCap, 2);
         } else {
             pRSNIEs->abyRSN[16] = 0;
@@ -339,10 +339,10 @@ WPA2uSetIEs(
         pRSNIEs->len +=2;
 
         if ((pMgmt->gsPMKIDCache.BSSIDInfoCount > 0) &&
-            (pMgmt->bRoaming == TRUE) &&
+            (pMgmt->bRoaming == true) &&
             (pMgmt->eAuthenMode == WMAC_AUTH_WPA2)) {
             // RSN PMKID
-            pwPMKID = (PWORD)(&pRSNIEs->abyRSN[18]);  // Point to PMKID count
+            pwPMKID = (unsigned short *)(&pRSNIEs->abyRSN[18]);  // Point to PMKID count
             *pwPMKID = 0;                               // Initialize PMKID count
             pbyBuffer = &pRSNIEs->abyRSN[20];           // Point to PMKID list
             for (ii = 0; ii < pMgmt->gsPMKIDCache.BSSIDInfoCount; ii++) {
diff --git a/drivers/staging/vt6655/wpa2.h b/drivers/staging/vt6655/wpa2.h
index 7200db37f43..718208beb72 100644
--- a/drivers/staging/vt6655/wpa2.h
+++ b/drivers/staging/vt6655/wpa2.h
@@ -40,12 +40,12 @@
 #define MAX_PMKID_CACHE         16
 
 typedef struct tagsPMKIDInfo {
-    BYTE    abyBSSID[6];
-    BYTE    abyPMKID[16];
+    unsigned char abyBSSID[6];
+    unsigned char abyPMKID[16];
 } PMKIDInfo, *PPMKIDInfo;
 
 typedef struct tagSPMKIDCache {
-    ULONG       BSSIDInfoCount;
+    unsigned long BSSIDInfoCount;
     PMKIDInfo   BSSIDInfo[MAX_PMKID_CACHE];
 } SPMKIDCache, *PSPMKIDCache;
 
@@ -69,7 +69,7 @@ WPA2vParseRSN (
     PWLAN_IE_RSN     pRSN
     );
 
-UINT
+unsigned int
 WPA2uSetIEs(
     void *pMgmtHandle,
     PWLAN_IE_RSN pRSNIEs
diff --git a/drivers/staging/vt6655/wpactl.c b/drivers/staging/vt6655/wpactl.c
index 22c2fab3f32..0142338bcaf 100644
--- a/drivers/staging/vt6655/wpactl.c
+++ b/drivers/staging/vt6655/wpactl.c
@@ -199,16 +199,16 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
  *
  */
 
- int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL  fcpfkernel)
+ int wpa_set_keys(PSDevice pDevice, void *ctx, bool fcpfkernel)
 {
     struct viawget_wpa_param *param=ctx;
     PSMgmtObject pMgmt = pDevice->pMgmt;
-    DWORD   dwKeyIndex = 0;
-    BYTE    abyKey[MAX_KEY_LEN];
-    BYTE    abySeq[MAX_KEY_LEN];
+    unsigned long dwKeyIndex = 0;
+    unsigned char abyKey[MAX_KEY_LEN];
+    unsigned char abySeq[MAX_KEY_LEN];
     QWORD   KeyRSC;
 //    NDIS_802_11_KEY_RSC KeyRSC;
-    BYTE    byKeyDecMode = KEY_CTL_WEP;
+    unsigned char byKeyDecMode = KEY_CTL_WEP;
 	int ret = 0;
 	int uu, ii;
 
@@ -219,9 +219,9 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "param->u.wpa_key.alg_name = %d \n", param->u.wpa_key.alg_name);
 	if (param->u.wpa_key.alg_name == WPA_ALG_NONE) {
         pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
-        pDevice->bEncryptionEnable = FALSE;
+        pDevice->bEncryptionEnable = false;
         pDevice->byKeyIndex = 0;
-        pDevice->bTransmitKey = FALSE;
+        pDevice->bTransmitKey = false;
         KeyvRemoveAllWEPKey(&(pDevice->sKey), pDevice->PortOffset);
         for (uu=0; uu<MAX_KEY_TABLE; uu++) {
             MACvDisableKeyEntry(pDevice->PortOffset, uu);
@@ -243,7 +243,7 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
 spin_lock_irq(&pDevice->lock);
     	}
 
-    dwKeyIndex = (DWORD)(param->u.wpa_key.key_index);
+    dwKeyIndex = (unsigned long)(param->u.wpa_key.key_index);
 
 	if (param->u.wpa_key.alg_name == WPA_ALG_WEP) {
         if (dwKeyIndex > 3) {
@@ -251,8 +251,8 @@ spin_lock_irq(&pDevice->lock);
         }
         else {
             if (param->u.wpa_key.set_tx) {
-                pDevice->byKeyIndex = (BYTE)dwKeyIndex;
-                pDevice->bTransmitKey = TRUE;
+                pDevice->byKeyIndex = (unsigned char)dwKeyIndex;
+                pDevice->bTransmitKey = true;
 		        dwKeyIndex |= (1 << 31);
             }
             KeybSetDefaultKey(&(pDevice->sKey),
@@ -266,7 +266,7 @@ spin_lock_irq(&pDevice->lock);
 
         }
         pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bEncryptionEnable = true;
         return ret;
 	}
 
@@ -351,26 +351,26 @@ spin_lock_irq(&pDevice->lock);
     }
 
    // spin_lock_irq(&pDevice->lock);
-    if (IS_BROADCAST_ADDRESS(&param->addr[0]) || (param->addr == NULL)) {
-        // If IS_BROADCAST_ADDRESS, set the key as every key entry's group key.
+    if (is_broadcast_ether_addr(&param->addr[0]) || (param->addr == NULL)) {
+        // If is_broadcast_ether_addr, set the key as every key entry's group key.
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Groupe Key Assign.\n");
 
         if ((KeybSetAllGroupKey(&(pDevice->sKey),
                             dwKeyIndex,
                             param->u.wpa_key.key_len,
                             (PQWORD) &(KeyRSC),
-                            (PBYTE)abyKey,
+                            (unsigned char *)abyKey,
                             byKeyDecMode,
                             pDevice->PortOffset,
-                            pDevice->byLocalID) == TRUE) &&
+                            pDevice->byLocalID) == true) &&
             (KeybSetDefaultKey(&(pDevice->sKey),
                             dwKeyIndex,
                             param->u.wpa_key.key_len,
                             (PQWORD) &(KeyRSC),
-                            (PBYTE)abyKey,
+                            (unsigned char *)abyKey,
                             byKeyDecMode,
                             pDevice->PortOffset,
-                            pDevice->byLocalID) == TRUE) ) {
+                            pDevice->byLocalID) == true) ) {
              DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "GROUP Key Assign.\n");
 
         } else {
@@ -400,15 +400,15 @@ spin_lock_irq(&pDevice->lock);
                        dwKeyIndex,
                        param->u.wpa_key.key_len,
                        (PQWORD) &(KeyRSC),
-                       (PBYTE)abyKey,
+                       (unsigned char *)abyKey,
                         byKeyDecMode,
                         pDevice->PortOffset,
-                        pDevice->byLocalID) == TRUE) {
+                        pDevice->byLocalID) == true) {
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Pairwise Key Set\n");
 
         } else {
             // Key Table Full
-            if (IS_ETH_ADDRESS_EQUAL(&param->addr[0], pDevice->abyBSSID)) {
+            if (!compare_ether_addr(&param->addr[0], pDevice->abyBSSID)) {
                 //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -Key Table Full.2\n"));
                 //spin_unlock_irq(&pDevice->lock);
                 return -EINVAL;
@@ -422,10 +422,10 @@ spin_lock_irq(&pDevice->lock);
         }
     } // BSSID not 0xffffffffffff
     if ((ret == 0) && ((param->u.wpa_key.set_tx) != 0)) {
-        pDevice->byKeyIndex = (BYTE)param->u.wpa_key.key_index;
-        pDevice->bTransmitKey = TRUE;
+        pDevice->byKeyIndex = (unsigned char)param->u.wpa_key.key_index;
+        pDevice->bTransmitKey = true;
     }
-    pDevice->bEncryptionEnable = TRUE;
+    pDevice->bEncryptionEnable = true;
     //spin_unlock_irq(&pDevice->lock);
 
 /*
@@ -465,7 +465,7 @@ static int wpa_set_wpa(PSDevice pDevice,
 	int ret = 0;
 
     pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
-    pMgmt->bShareKeyAlgorithm = FALSE;
+    pMgmt->bShareKeyAlgorithm = false;
 
     return ret;
 }
@@ -613,13 +613,13 @@ static int wpa_get_scan(PSDevice pDevice,
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PWLAN_IE_SSID   pItemSSID;
     PKnownBSS pBSS;
-	PBYTE  pBuf;
+	unsigned char *pBuf;
 	int ret = 0;
 	u16 count = 0;
 	u16 ii, jj;
 #if 1
 
-    PBYTE ptempBSS;
+    unsigned char *ptempBSS;
 
 
 
@@ -639,9 +639,9 @@ static int wpa_get_scan(PSDevice pDevice,
 
          for(jj=0;jj<MAX_BSS_NUM-ii-1;jj++) {
 
-           if((pMgmt->sBSSList[jj].bActive!=TRUE) ||
+           if((pMgmt->sBSSList[jj].bActive!=true) ||
 
-                ((pMgmt->sBSSList[jj].uRSSI>pMgmt->sBSSList[jj+1].uRSSI) &&(pMgmt->sBSSList[jj+1].bActive!=FALSE))) {
+                ((pMgmt->sBSSList[jj].uRSSI>pMgmt->sBSSList[jj+1].uRSSI) &&(pMgmt->sBSSList[jj+1].bActive!=false))) {
 
                  memcpy(ptempBSS,&pMgmt->sBSSList[jj],sizeof(KnownBSS));
 
@@ -713,7 +713,7 @@ static int wpa_get_scan(PSDevice pDevice,
                 scan_buf->rsn_ie_len = pBSS->wRSNLen;
                 memcpy(scan_buf->rsn_ie, pBSS->byRSNIE, pBSS->wRSNLen);
             }
-            scan_buf = (struct viawget_scan_result *)((PBYTE)scan_buf + sizeof(struct viawget_scan_result));
+            scan_buf = (struct viawget_scan_result *)((unsigned char *)scan_buf + sizeof(struct viawget_scan_result));
             jj ++;
         }
     }
@@ -752,10 +752,10 @@ static int wpa_set_associate(PSDevice pDevice,
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PWLAN_IE_SSID   pItemSSID;
-    BYTE    abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-    BYTE    abyWPAIE[64];
+    unsigned char abyNullAddr[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    unsigned char abyWPAIE[64];
     int ret = 0;
-    BOOL bWepEnabled=FALSE;
+    bool bWepEnabled=false;
 
 	// set key type & algorithm
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pairwise_suite = %d\n", param->u.wpa_associate.pairwise_suite);
@@ -817,7 +817,7 @@ else
 	case CIPHER_WEP40:
 	case CIPHER_WEP104:
 		pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
-		bWepEnabled=TRUE;
+		bWepEnabled=true;
 		break;
 	case CIPHER_NONE:
 		if (param->u.wpa_associate.group_suite == CIPHER_CCMP)
@@ -834,26 +834,26 @@ else
       if (pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) {
             pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
             //pMgmt->eAuthenMode = WMAC_AUTH_SHAREKEY;
-            pMgmt->bShareKeyAlgorithm = TRUE;
+            pMgmt->bShareKeyAlgorithm = true;
              }
      else if (pMgmt->eAuthenMode == WMAC_AUTH_OPEN) {
           if(!bWepEnabled)  pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
 	else pDevice->eEncryptionStatus = Ndis802_11Encryption1Enabled;
             //pMgmt->eAuthenMode = WMAC_AUTH_OPEN;
-            //pMgmt->bShareKeyAlgorithm = FALSE; //20080717-06,<Modify> by chester//Fix Open mode, WEP encrytion
+            //pMgmt->bShareKeyAlgorithm = false; //20080717-06,<Modify> by chester//Fix Open mode, WEP encrytion
            }
 //mike save old encryption status
 	pDevice->eOldEncryptionStatus = pDevice->eEncryptionStatus;
 
     if (pDevice->eEncryptionStatus !=  Ndis802_11EncryptionDisabled)
-        pDevice->bEncryptionEnable = TRUE;
+        pDevice->bEncryptionEnable = true;
     else
-        pDevice->bEncryptionEnable = FALSE;
+        pDevice->bEncryptionEnable = false;
 if (!((pMgmt->eAuthenMode == WMAC_AUTH_SHAREKEY) ||
-      ((pMgmt->eAuthenMode == WMAC_AUTH_OPEN) && (bWepEnabled==TRUE))) )  //DavidWang  //20080717-06,<Modify> by chester//Not to initial WEP
+      ((pMgmt->eAuthenMode == WMAC_AUTH_OPEN) && (bWepEnabled==true))) )  //DavidWang  //20080717-06,<Modify> by chester//Not to initial WEP
     KeyvInitTable(&pDevice->sKey, pDevice->PortOffset);
     spin_lock_irq(&pDevice->lock);
-    pDevice->bLinkPass = FALSE;
+    pDevice->bLinkPass = false;
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     netif_stop_queue(pDevice->dev);
@@ -922,7 +922,7 @@ int wpa_ioctl(PSDevice pDevice, struct iw_point *p)
 	case VIAWGET_SET_KEY:
 	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "VIAWGET_SET_KEY \n");
 	    spin_lock_irq(&pDevice->lock);
-        ret = wpa_set_keys(pDevice, param, FALSE);
+        ret = wpa_set_keys(pDevice, param, false);
         spin_unlock_irq(&pDevice->lock);
 		break;
 
diff --git a/drivers/staging/vt6655/wpactl.h b/drivers/staging/vt6655/wpactl.h
index b0d92d51a2a..dbe8e861d99 100644
--- a/drivers/staging/vt6655/wpactl.h
+++ b/drivers/staging/vt6655/wpactl.h
@@ -54,7 +54,7 @@ typedef enum { KEY_MGMT_802_1X, KEY_MGMT_CCKM,KEY_MGMT_PSK, KEY_MGMT_NONE,
 
 
 
-typedef ULONGLONG   NDIS_802_11_KEY_RSC;
+typedef unsigned long long   NDIS_802_11_KEY_RSC;
 
 /*---------------------  Export Classes  ----------------------------*/
 
@@ -64,7 +64,7 @@ typedef ULONGLONG   NDIS_802_11_KEY_RSC;
 
 int wpa_set_wpadev(PSDevice pDevice, int val);
 int wpa_ioctl(PSDevice pDevice, struct iw_point *p);
-int wpa_set_keys(PSDevice pDevice, void *ctx, BOOL  fcpfkernel);
+int wpa_set_keys(PSDevice pDevice, void *ctx, bool fcpfkernel);
 
 #endif // __WPACL_H__
 
diff --git a/drivers/staging/vt6655/wroute.c b/drivers/staging/vt6655/wroute.c
index bf92fb9908f..66e2eeae628 100644
--- a/drivers/staging/vt6655/wroute.c
+++ b/drivers/staging/vt6655/wroute.c
@@ -53,45 +53,45 @@ static int          msglevel                =MSG_LEVEL_INFO;
 
 /*
  * Description:
- *      Relay packet.  Return TRUE if packet is copy to DMA1
+ *      Relay packet.  Return true if packet is copy to DMA1
  *
  * Parameters:
  *  In:
  *      pDevice             -
  *      pbySkbData          - rx packet skb data
  *  Out:
- *      TURE, FALSE
+ *      true, false
  *
- * Return Value: TRUE if packet duplicate; otherwise FALSE
+ * Return Value: true if packet duplicate; otherwise false
  *
  */
-BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeIndex)
+bool ROUTEbRelay (PSDevice pDevice, unsigned char *pbySkbData, unsigned int uDataLen, unsigned int uNodeIndex)
 {
     PSMgmtObject    pMgmt = pDevice->pMgmt;
     PSTxDesc        pHeadTD, pLastTD;
-    UINT            cbFrameBodySize;
-    UINT            uMACfragNum;
-    BYTE            byPktType;
-    BOOL            bNeedEncryption = FALSE;
+    unsigned int cbFrameBodySize;
+    unsigned int uMACfragNum;
+    unsigned char byPktType;
+    bool bNeedEncryption = false;
     SKeyItem        STempKey;
     PSKeyItem       pTransmitKey = NULL;
-    UINT            cbHeaderSize;
-    UINT            ii;
-    PBYTE           pbyBSSID;
+    unsigned int cbHeaderSize;
+    unsigned int ii;
+    unsigned char *pbyBSSID;
 
 
 
 
     if (AVAIL_TD(pDevice, TYPE_AC0DMA)<=0) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Relay can't allocate TD1..\n");
-        return FALSE;
+        return false;
     }
 
     pHeadTD = pDevice->apCurrTD[TYPE_AC0DMA];
 
     pHeadTD->m_td1TD1.byTCR = (TCR_EDP|TCR_STP);
 
-    memcpy(pDevice->sTxEthHeader.abyDstAddr, (PBYTE)pbySkbData, ETH_HLEN);
+    memcpy(pDevice->sTxEthHeader.abyDstAddr, (unsigned char *)pbySkbData, ETH_HLEN);
 
     cbFrameBodySize = uDataLen - ETH_HLEN;
 
@@ -99,12 +99,12 @@ BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeI
         cbFrameBodySize += 8;
     }
 
-    if (pDevice->bEncryptionEnable == TRUE) {
-        bNeedEncryption = TRUE;
+    if (pDevice->bEncryptionEnable == true) {
+        bNeedEncryption = true;
 
         // get group key
         pbyBSSID = pDevice->abyBroadcastAddr;
-        if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == FALSE) {
+        if(KeybGetTransmitKey(&(pDevice->sKey), pbyBSSID, GROUP_KEY, &pTransmitKey) == false) {
             pTransmitKey = NULL;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_DEBUG"KEY is NULL. [%d]\n", pDevice->pMgmt->eCurrMode);
         } else {
@@ -130,16 +130,16 @@ BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeI
     uMACfragNum = cbGetFragCount(pDevice, pTransmitKey, cbFrameBodySize, &pDevice->sTxEthHeader);
 
     if (uMACfragNum > AVAIL_TD(pDevice,TYPE_AC0DMA)) {
-        return FALSE;
+        return false;
     }
-    byPktType = (BYTE)pDevice->byPacketType;
+    byPktType = (unsigned char)pDevice->byPacketType;
 
     if (pDevice->bFixRate) {
         if (pDevice->eCurrentPHYType == PHY_TYPE_11B) {
             if (pDevice->uConnectionRate >= RATE_11M) {
                 pDevice->wCurrentRate = RATE_11M;
             } else {
-                pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
             }
         } else {
             if ((pDevice->eCurrentPHYType == PHY_TYPE_11A) &&
@@ -149,7 +149,7 @@ BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeI
                 if (pDevice->uConnectionRate >= RATE_54M)
                     pDevice->wCurrentRate = RATE_54M;
                 else
-                    pDevice->wCurrentRate = (WORD)pDevice->uConnectionRate;
+                    pDevice->wCurrentRate = (unsigned short)pDevice->uConnectionRate;
             }
         }
     }
@@ -172,7 +172,7 @@ BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeI
         MACbPSWakeup(pDevice->PortOffset);
     }
 
-    pDevice->bPWBitOn = FALSE;
+    pDevice->bPWBitOn = false;
 
     pLastTD = pHeadTD;
     for (ii = 0; ii < uMACfragNum; ii++) {
@@ -192,7 +192,7 @@ BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeI
 
     MACvTransmitAC0(pDevice->PortOffset);
 
-    return TRUE;
+    return true;
 }
 
 
diff --git a/drivers/staging/vt6655/wroute.h b/drivers/staging/vt6655/wroute.h
index 295cdc5b8e9..34f9e43a6cc 100644
--- a/drivers/staging/vt6655/wroute.h
+++ b/drivers/staging/vt6655/wroute.h
@@ -39,7 +39,7 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-BOOL ROUTEbRelay (PSDevice pDevice, PBYTE pbySkbData, UINT uDataLen, UINT uNodeIndex);
+bool ROUTEbRelay (PSDevice pDevice, unsigned char *pbySkbData, unsigned int uDataLen, unsigned int uNodeIndex);
 
 #endif // __WROUTE_H__
 
diff --git a/drivers/staging/vt6656/80211mgr.c b/drivers/staging/vt6656/80211mgr.c
index f24dc55e68f..fceec4999c3 100644
--- a/drivers/staging/vt6656/80211mgr.c
+++ b/drivers/staging/vt6656/80211mgr.c
@@ -18,7 +18,7 @@
  *
  * File: 80211mgr.c
  *
- * Purpose: Handles the 802.11 managment support functions
+ * Purpose: Handles the 802.11 management support functions
  *
  * Author: Lyndon Chen
  *
@@ -67,8 +67,8 @@
 
 /*---------------------  Static Variables  --------------------------*/
 
-static int          msglevel                =MSG_LEVEL_INFO;
-//static int          msglevel                =MSG_LEVEL_DEBUG;
+static int          msglevel                = MSG_LEVEL_INFO;
+/*static int          msglevel                =MSG_LEVEL_DEBUG;*/
 /*---------------------  Static Functions  --------------------------*/
 
 
@@ -96,7 +96,7 @@ vMgrEncodeBeacon(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_BEACON_OFF_TS);
     pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -130,7 +130,7 @@ vMgrDecodeBeacon(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_BEACON_OFF_TS);
     pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -138,88 +138,87 @@ vMgrDecodeBeacon(
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_BEACON_OFF_CAPINFO);
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)((PBYTE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)))
                        + WLAN_BEACON_OFF_SSID);
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ){
+    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
 
         switch (pItem->byElementID) {
-            case WLAN_EID_SSID:
-                if (pFrame->pSSID == NULL)
-                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
-                break;
-            case WLAN_EID_SUPP_RATES:
-                if (pFrame->pSuppRates == NULL)
-                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-            case WLAN_EID_FH_PARMS:
-                //pFrame->pFHParms = (PWLAN_IE_FH_PARMS)pItem;
-                break;
-            case WLAN_EID_DS_PARMS:
-                if (pFrame->pDSParms == NULL)
-                    pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
-                break;
-            case WLAN_EID_CF_PARMS:
-                if (pFrame->pCFParms == NULL)
-                    pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
-                break;
-            case WLAN_EID_IBSS_PARMS:
-                if (pFrame->pIBSSParms == NULL)
-                    pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
-                break;
-            case WLAN_EID_TIM:
-                if (pFrame->pTIM == NULL)
-                    pFrame->pTIM = (PWLAN_IE_TIM)pItem;
-                break;
-
-            case WLAN_EID_RSN:
-                if (pFrame->pRSN == NULL) {
-                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-                }
-                break;
-            case WLAN_EID_RSN_WPA:
-                if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
-                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
-                }
-                break;
-
-            case WLAN_EID_ERP:
-                if (pFrame->pERP == NULL)
-                    pFrame->pERP = (PWLAN_IE_ERP)pItem;
-                break;
-            case WLAN_EID_EXTSUPP_RATES:
-                if (pFrame->pExtSuppRates == NULL)
-                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-
-            case WLAN_EID_COUNTRY:      //7
-                if (pFrame->pIE_Country == NULL)
-                    pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
-                break;
-
-            case WLAN_EID_PWR_CONSTRAINT:   //32
-                if (pFrame->pIE_PowerConstraint == NULL)
-                    pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
-                break;
-
-            case WLAN_EID_CH_SWITCH:    //37
-                if (pFrame->pIE_CHSW == NULL)
-                    pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
-                break;
-
-            case WLAN_EID_QUIET:        //40
-                if (pFrame->pIE_Quiet == NULL)
-                    pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
-                break;
-
-            case WLAN_EID_IBSS_DFS:
-                if (pFrame->pIE_IBSSDFS == NULL)
-                    pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
-                break;
-
-            default:
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in beacon decode.\n", pItem->byElementID);
+        case WLAN_EID_SSID:
+            if (pFrame->pSSID == NULL)
+                pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+            break;
+        case WLAN_EID_SUPP_RATES:
+            if (pFrame->pSuppRates == NULL)
+                pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+        case WLAN_EID_FH_PARMS:
+            /* pFrame->pFHParms = (PWLAN_IE_FH_PARMS)pItem; */
+            break;
+        case WLAN_EID_DS_PARMS:
+            if (pFrame->pDSParms == NULL)
+                pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
+            break;
+        case WLAN_EID_CF_PARMS:
+            if (pFrame->pCFParms == NULL)
+                pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
+            break;
+        case WLAN_EID_IBSS_PARMS:
+            if (pFrame->pIBSSParms == NULL)
+                pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
+            break;
+        case WLAN_EID_TIM:
+            if (pFrame->pTIM == NULL)
+                pFrame->pTIM = (PWLAN_IE_TIM)pItem;
+            break;
+
+        case WLAN_EID_RSN:
+            if (pFrame->pRSN == NULL) 
+                pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+            break;
+        case WLAN_EID_RSN_WPA:
+            if (pFrame->pRSNWPA == NULL) {
+                if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+            }
+            break;
+
+        case WLAN_EID_ERP:
+            if (pFrame->pERP == NULL)
+                pFrame->pERP = (PWLAN_IE_ERP)pItem;
+            break;
+        case WLAN_EID_EXTSUPP_RATES:
+            if (pFrame->pExtSuppRates == NULL)
+                pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+
+        case WLAN_EID_COUNTRY:      /* 7 */
+            if (pFrame->pIE_Country == NULL)
+                pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
+            break;
+
+        case WLAN_EID_PWR_CONSTRAINT:   /* 32 */
+            if (pFrame->pIE_PowerConstraint == NULL)
+                pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
+            break;
+
+        case WLAN_EID_CH_SWITCH:    /* 37 */
+            if (pFrame->pIE_CHSW == NULL)
+                pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
+            break;
+
+        case WLAN_EID_QUIET:        /* 40 */
+            if (pFrame->pIE_Quiet == NULL)
+                pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
+            break;
+
+        case WLAN_EID_IBSS_DFS:
+            if (pFrame->pIE_IBSSDFS == NULL)
+                pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
+            break;
+
+        default:
+            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in beacon decode.\n", pItem->byElementID);
                 break;
 
         }
@@ -295,7 +294,7 @@ vMgrEncodeDisassociation(
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DISASSOC_OFF_REASON);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DISASSOC_OFF_REASON + sizeof(*(pFrame->pwReason));
@@ -322,7 +321,7 @@ vMgrDecodeDisassociation(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DISASSOC_OFF_REASON);
 
@@ -347,7 +346,7 @@ vMgrEncodeAssocRequest(
     )
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_CAP_INFO);
     pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -376,47 +375,46 @@ vMgrDecodeAssocRequest(
     PWLAN_IE   pItem;
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_CAP_INFO);
     pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCREQ_OFF_LISTEN_INT);
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_ASSOCREQ_OFF_SSID);
 
     while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
-        switch (pItem->byElementID){
-            case WLAN_EID_SSID:
-                if (pFrame->pSSID == NULL)
-                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
-                break;
-            case WLAN_EID_SUPP_RATES:
-                if (pFrame->pSuppRates == NULL)
-                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-
-            case WLAN_EID_RSN:
-                if (pFrame->pRSN == NULL) {
-                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-                }
-                break;
-            case WLAN_EID_RSN_WPA:
-                if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
-                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
-                }
-                break;
-            case WLAN_EID_EXTSUPP_RATES:
-                if (pFrame->pExtSuppRates == NULL)
-                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-
-            default:
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in assocreq decode.\n",
-                        pItem->byElementID);
-                break;
+        switch (pItem->byElementID) {
+        case WLAN_EID_SSID:
+            if (pFrame->pSSID == NULL)
+                pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+            break;
+        case WLAN_EID_SUPP_RATES:
+            if (pFrame->pSuppRates == NULL)
+                pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+
+        case WLAN_EID_RSN:
+            if (pFrame->pRSN == NULL)
+                pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+            break;
+        case WLAN_EID_RSN_WPA:
+            if (pFrame->pRSNWPA == NULL) {
+                if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+            }
+            break;
+        case WLAN_EID_EXTSUPP_RATES:
+            if (pFrame->pExtSuppRates == NULL)
+                pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+
+        default:
+            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in assocreq decode.\n",
+                    pItem->byElementID);
+            break;
         }
         pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
     }
@@ -441,7 +439,7 @@ vMgrEncodeAssocResponse(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCRESP_OFF_CAP_INFO);
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -475,7 +473,7 @@ vMgrDecodeAssocResponse(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_ASSOCRESP_OFF_CAP_INFO);
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -483,7 +481,7 @@ vMgrDecodeAssocResponse(
     pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_ASSOCRESP_OFF_AID);
 
-    // Information elements
+    /* Information elements */
     pFrame->pSuppRates  = (PWLAN_IE_SUPP_RATES)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                            + WLAN_ASSOCRESP_OFF_SUPP_RATES);
 
@@ -493,8 +491,7 @@ vMgrDecodeAssocResponse(
     if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
         pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "pFrame->pExtSuppRates=[%p].\n", pItem);
-    }
-    else {
+    } else {
         pFrame->pExtSuppRates = NULL;
     }
     return;
@@ -519,7 +516,7 @@ vMgrEncodeReassocRequest(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCREQ_OFF_CAP_INFO);
     pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -552,7 +549,7 @@ vMgrDecodeReassocRequest(
     PWLAN_IE   pItem;
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCREQ_OFF_CAP_INFO);
     pFrame->pwListenInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -560,42 +557,41 @@ vMgrDecodeReassocRequest(
     pFrame->pAddrCurrAP = (PIEEE_ADDR)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                        + WLAN_REASSOCREQ_OFF_CURR_AP);
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_REASSOCREQ_OFF_SSID);
 
-    while(((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
-
-        switch (pItem->byElementID){
-            case WLAN_EID_SSID:
-                if (pFrame->pSSID == NULL)
-                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
-                break;
-            case WLAN_EID_SUPP_RATES:
-                if (pFrame->pSuppRates == NULL)
-                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-
-            case WLAN_EID_RSN:
-                if (pFrame->pRSN == NULL) {
-                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-                }
-                break;
-            case WLAN_EID_RSN_WPA:
-                if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
-                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
-                }
-                break;
+    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
 
-            case WLAN_EID_EXTSUPP_RATES:
-                if (pFrame->pExtSuppRates == NULL)
-                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-            default:
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in reassocreq decode.\n",
-                            pItem->byElementID);
-                break;
+        switch (pItem->byElementID) {
+        case WLAN_EID_SSID:
+            if (pFrame->pSSID == NULL)
+                pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+            break;
+        case WLAN_EID_SUPP_RATES:
+            if (pFrame->pSuppRates == NULL)
+                pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+
+        case WLAN_EID_RSN:
+            if (pFrame->pRSN == NULL)
+                pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+            break;
+        case WLAN_EID_RSN_WPA:
+            if (pFrame->pRSNWPA == NULL) {
+                if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+            }
+            break;
+
+        case WLAN_EID_EXTSUPP_RATES:
+            if (pFrame->pExtSuppRates == NULL)
+                pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+        default:
+            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Unrecognized EID=%dd in reassocreq decode.\n",
+                        pItem->byElementID);
+            break;
         }
         pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
     }
@@ -646,30 +642,30 @@ vMgrDecodeProbeRequest(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3)));
 
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
 
         switch (pItem->byElementID) {
-            case WLAN_EID_SSID:
-                if (pFrame->pSSID == NULL)
-                    pFrame->pSSID = (PWLAN_IE_SSID)pItem;
-                break;
+        case WLAN_EID_SSID:
+            if (pFrame->pSSID == NULL)
+                pFrame->pSSID = (PWLAN_IE_SSID)pItem;
+            break;
 
-            case WLAN_EID_SUPP_RATES:
-                if (pFrame->pSuppRates == NULL)
-                    pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
+        case WLAN_EID_SUPP_RATES:
+            if (pFrame->pSuppRates == NULL)
+                pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
 
-            case WLAN_EID_EXTSUPP_RATES:
-                if (pFrame->pExtSuppRates == NULL)
-                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
+        case WLAN_EID_EXTSUPP_RATES:
+            if (pFrame->pExtSuppRates == NULL)
+                pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
 
-            default:
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in probereq\n", pItem->byElementID);
-                break;
+        default:
+            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in probereq\n", pItem->byElementID);
+            break;
         }
 
         pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
@@ -697,7 +693,7 @@ vMgrEncodeProbeResponse(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_PROBERESP_OFF_TS);
     pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -734,7 +730,7 @@ vMgrDecodeProbeResponse(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pqwTimestamp = (PQWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                     + WLAN_PROBERESP_OFF_TS);
     pFrame->pwBeaconInterval = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -742,83 +738,82 @@ vMgrDecodeProbeResponse(
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_PROBERESP_OFF_CAP_INFO);
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_PROBERESP_OFF_SSID);
 
-    while( ((PBYTE)pItem) < (pFrame->pBuf + pFrame->len) ) {
+    while (((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) {
         switch (pItem->byElementID) {
-            case WLAN_EID_SSID:
-                if (pFrame->pSSID == NULL)
+        case WLAN_EID_SSID:
+            if (pFrame->pSSID == NULL)
                 pFrame->pSSID = (PWLAN_IE_SSID)pItem;
-                break;
-            case WLAN_EID_SUPP_RATES:
-                if (pFrame->pSuppRates == NULL)
+            break;
+        case WLAN_EID_SUPP_RATES:
+            if (pFrame->pSuppRates == NULL)
                 pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-            case WLAN_EID_FH_PARMS:
-                break;
-            case WLAN_EID_DS_PARMS:
-                if (pFrame->pDSParms == NULL)
-                    pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
-                break;
-            case WLAN_EID_CF_PARMS:
-                if (pFrame->pCFParms == NULL)
-                    pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
-                break;
-            case WLAN_EID_IBSS_PARMS:
-                if (pFrame->pIBSSParms == NULL)
-                    pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
-                break;
-
-            case WLAN_EID_RSN:
-                if (pFrame->pRSN == NULL) {
-                    pFrame->pRSN = (PWLAN_IE_RSN)pItem;
-                }
-                break;
-            case WLAN_EID_RSN_WPA:
-                if (pFrame->pRSNWPA == NULL) {
-                    if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
-                        pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
-                }
-                break;
-            case WLAN_EID_ERP:
-                if (pFrame->pERP == NULL)
-                    pFrame->pERP = (PWLAN_IE_ERP)pItem;
-                break;
-            case WLAN_EID_EXTSUPP_RATES:
-                if (pFrame->pExtSuppRates == NULL)
-                    pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-                break;
-
-            case WLAN_EID_COUNTRY:      //7
-                if (pFrame->pIE_Country == NULL)
-                    pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
-                break;
-
-            case WLAN_EID_PWR_CONSTRAINT:   //32
-                if (pFrame->pIE_PowerConstraint == NULL)
-                    pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
-                break;
-
-            case WLAN_EID_CH_SWITCH:    //37
-                if (pFrame->pIE_CHSW == NULL)
-                    pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
-                break;
-
-            case WLAN_EID_QUIET:        //40
-                if (pFrame->pIE_Quiet == NULL)
-                    pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
-                break;
-
-            case WLAN_EID_IBSS_DFS:
-                if (pFrame->pIE_IBSSDFS == NULL)
-                    pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
-                break;
-
-            default:
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in proberesp\n", pItem->byElementID);
-                break;
+            break;
+        case WLAN_EID_FH_PARMS:
+            break;
+        case WLAN_EID_DS_PARMS:
+            if (pFrame->pDSParms == NULL)
+                pFrame->pDSParms = (PWLAN_IE_DS_PARMS)pItem;
+            break;
+        case WLAN_EID_CF_PARMS:
+            if (pFrame->pCFParms == NULL)
+                pFrame->pCFParms = (PWLAN_IE_CF_PARMS)pItem;
+            break;
+        case WLAN_EID_IBSS_PARMS:
+            if (pFrame->pIBSSParms == NULL)
+                pFrame->pIBSSParms = (PWLAN_IE_IBSS_PARMS)pItem;
+            break;
+
+        case WLAN_EID_RSN:
+            if (pFrame->pRSN == NULL)
+                pFrame->pRSN = (PWLAN_IE_RSN)pItem;
+            break;
+        case WLAN_EID_RSN_WPA:
+            if (pFrame->pRSNWPA == NULL) {
+                if (WPAb_Is_RSN((PWLAN_IE_RSN_EXT)pItem) == TRUE)
+                    pFrame->pRSNWPA = (PWLAN_IE_RSN_EXT)pItem;
+            }
+            break;
+        case WLAN_EID_ERP:
+            if (pFrame->pERP == NULL)
+                pFrame->pERP = (PWLAN_IE_ERP)pItem;
+            break;
+        case WLAN_EID_EXTSUPP_RATES:
+            if (pFrame->pExtSuppRates == NULL)
+                pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
+            break;
+
+        case WLAN_EID_COUNTRY:      /* 7 */
+            if (pFrame->pIE_Country == NULL)
+                pFrame->pIE_Country = (PWLAN_IE_COUNTRY)pItem;
+            break;
+
+        case WLAN_EID_PWR_CONSTRAINT:   /* 32 */
+            if (pFrame->pIE_PowerConstraint == NULL)
+                pFrame->pIE_PowerConstraint = (PWLAN_IE_PW_CONST)pItem;
+            break;
+
+        case WLAN_EID_CH_SWITCH:    /* 37 */
+            if (pFrame->pIE_CHSW == NULL)
+                pFrame->pIE_CHSW = (PWLAN_IE_CH_SW)pItem;
+            break;
+
+        case WLAN_EID_QUIET:        /* 40 */
+            if (pFrame->pIE_Quiet == NULL)
+                pFrame->pIE_Quiet = (PWLAN_IE_QUIET)pItem;
+            break;
+
+        case WLAN_EID_IBSS_DFS:
+            if (pFrame->pIE_IBSSDFS == NULL)
+                pFrame->pIE_IBSSDFS = (PWLAN_IE_IBSS_DFS)pItem;
+            break;
+
+        default:
+            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Bad EID=%dd in proberesp\n", pItem->byElementID);
+            break;
         }
 
         pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 +  pItem->len);
@@ -845,7 +840,7 @@ vMgrEncodeAuthen(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_AUTHEN_OFF_AUTH_ALG);
     pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -853,7 +848,6 @@ vMgrEncodeAuthen(
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_AUTHEN_OFF_STATUS);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_AUTHEN_OFF_STATUS + sizeof(*(pFrame->pwStatus));
-
     return;
 }
 
@@ -878,7 +872,7 @@ vMgrDecodeAuthen(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwAuthAlgorithm = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                       + WLAN_AUTHEN_OFF_AUTH_ALG);
     pFrame->pwAuthSequence = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -886,14 +880,12 @@ vMgrDecodeAuthen(
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_AUTHEN_OFF_STATUS);
 
-    // Information elements
+    /* Information elements */
     pItem = (PWLAN_IE)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                        + WLAN_AUTHEN_OFF_CHALLENGE);
 
-    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE)) {
+    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_CHALLENGE))
         pFrame->pChallenge = (PWLAN_IE_CHALLENGE)pItem;
-    }
-
     return;
 }
 
@@ -916,11 +908,10 @@ vMgrEncodeDeauthen(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DEAUTHEN_OFF_REASON);
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_DEAUTHEN_OFF_REASON + sizeof(*(pFrame->pwReason));
-
     return;
 }
 
@@ -943,10 +934,9 @@ vMgrDecodeDeauthen(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwReason = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                + WLAN_DEAUTHEN_OFF_REASON);
-
     return;
 }
 
@@ -969,7 +959,7 @@ vMgrEncodeReassocResponse(
 {
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCRESP_OFF_CAP_INFO);
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -978,7 +968,6 @@ vMgrEncodeReassocResponse(
                             + WLAN_REASSOCRESP_OFF_AID);
 
     pFrame->len = WLAN_HDR_ADDR3_LEN + WLAN_REASSOCRESP_OFF_AID + sizeof(*(pFrame->pwAid));
-
     return;
 }
 
@@ -1004,7 +993,7 @@ vMgrDecodeReassocResponse(
 
     pFrame->pHdr = (PUWLAN_80211HDR)pFrame->pBuf;
 
-    // Fixed Fields
+    /* Fixed Fields */
     pFrame->pwCapInfo = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                 + WLAN_REASSOCRESP_OFF_CAP_INFO);
     pFrame->pwStatus = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
@@ -1012,15 +1001,14 @@ vMgrDecodeReassocResponse(
     pFrame->pwAid = (PWORD)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                             + WLAN_REASSOCRESP_OFF_AID);
 
-    //Information elements
+    /* Information elements */
     pFrame->pSuppRates = (PWLAN_IE_SUPP_RATES)(WLAN_HDR_A3_DATA_PTR(&(pFrame->pHdr->sA3))
                                                + WLAN_REASSOCRESP_OFF_SUPP_RATES);
 
     pItem = (PWLAN_IE)(pFrame->pSuppRates);
     pItem = (PWLAN_IE)(((PBYTE)pItem) + 2 + pItem->len);
 
-    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES)) {
+    if ((((PBYTE)pItem) < (pFrame->pBuf + pFrame->len)) && (pItem->byElementID == WLAN_EID_EXTSUPP_RATES))
         pFrame->pExtSuppRates = (PWLAN_IE_SUPP_RATES)pItem;
-    }
     return;
 }
diff --git a/drivers/staging/vt6656/80211mgr.h b/drivers/staging/vt6656/80211mgr.h
index c140a957d9d..3d57f793986 100644
--- a/drivers/staging/vt6656/80211mgr.h
+++ b/drivers/staging/vt6656/80211mgr.h
@@ -19,7 +19,7 @@
  *
  * File: 80211mgr.h
  *
- * Purpose: 802.11 managment frames pre-defines.
+ * Purpose: 802.11 management frames pre-defines.
  *
  *
  * Author: Lyndon Chen
@@ -222,46 +222,39 @@
 #define MEASURE_MODE_INCAPABLE  0x02
 #define MEASURE_MODE_REFUSED    0x04
 
-
-
 /*---------------------  Export Classes  ----------------------------*/
 
 /*---------------------  Export Variables  --------------------------*/
 
 /*---------------------  Export Types  ------------------------------*/
 
-
 // Information Element Types
 
 #pragma pack(1)
 typedef struct tagWLAN_IE {
     BYTE   byElementID;
     BYTE   len;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE, *PWLAN_IE;
 
-
 // Service Set Identity (SSID)
 #pragma pack(1)
 typedef struct tagWLAN_IE_SSID {
     BYTE   byElementID;
     BYTE   len;
     BYTE   abySSID[1];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_SSID, *PWLAN_IE_SSID;
 
-
 // Supported Rates
 #pragma pack(1)
 typedef struct tagWLAN_IE_SUPP_RATES {
     BYTE   byElementID;
     BYTE   len;
     BYTE   abyRates[1];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_SUPP_RATES,  *PWLAN_IE_SUPP_RATES;
 
-
-
 // FH Parameter Set
 #pragma pack(1)
 typedef struct _WLAN_IE_FH_PARMS {
@@ -279,10 +272,9 @@ typedef struct tagWLAN_IE_DS_PARMS {
     BYTE   byElementID;
     BYTE   len;
     BYTE   byCurrChannel;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_DS_PARMS,  *PWLAN_IE_DS_PARMS;
 
-
 // CF Parameter Set
 #pragma pack(1)
 typedef struct tagWLAN_IE_CF_PARMS {
@@ -292,10 +284,9 @@ typedef struct tagWLAN_IE_CF_PARMS {
     BYTE   byCFPPeriod;
     WORD   wCFPMaxDuration;
     WORD   wCFPDurRemaining;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_CF_PARMS,  *PWLAN_IE_CF_PARMS;
 
-
 // TIM
 #pragma pack(1)
 typedef struct tagWLAN_IE_TIM {
@@ -305,30 +296,27 @@ typedef struct tagWLAN_IE_TIM {
     BYTE   byDTIMPeriod;
     BYTE   byBitMapCtl;
     BYTE   byVirtBitMap[1];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_TIM,  *PWLAN_IE_TIM;
 
-
 // IBSS Parameter Set
 #pragma pack(1)
 typedef struct tagWLAN_IE_IBSS_PARMS {
     BYTE   byElementID;
     BYTE   len;
     WORD   wATIMWindow;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_IBSS_PARMS, *PWLAN_IE_IBSS_PARMS;
 
-
 // Challenge Text
 #pragma pack(1)
 typedef struct tagWLAN_IE_CHALLENGE {
     BYTE   byElementID;
     BYTE   len;
     BYTE   abyChallenge[1];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_CHALLENGE,  *PWLAN_IE_CHALLENGE;
 
-
 #pragma pack(1)
 typedef struct tagWLAN_IE_RSN_EXT {
     BYTE byElementID;
@@ -391,10 +379,9 @@ typedef struct tagWLAN_IE_ERP {
     BYTE   byElementID;
     BYTE   len;
     BYTE   byContext;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 WLAN_IE_ERP,  *PWLAN_IE_ERP;
 
-
 #pragma pack(1)
 typedef struct _MEASEURE_REQ {
     BYTE                byChannel;
diff --git a/drivers/staging/vt6656/aes_ccmp.c b/drivers/staging/vt6656/aes_ccmp.c
index b3d367b9bdc..f7a3b8f8da7 100644
--- a/drivers/staging/vt6656/aes_ccmp.c
+++ b/drivers/staging/vt6656/aes_ccmp.c
@@ -106,7 +106,7 @@ BYTE dot3_table[256] = {
 
 /*---------------------  Export Functions  --------------------------*/
 
-void xor_128(BYTE *a, BYTE *b, BYTE *out)
+static void xor_128(BYTE *a, BYTE *b, BYTE *out)
 {
 	PDWORD dwPtrA = (PDWORD) a;
 	PDWORD dwPtrB = (PDWORD) b;
@@ -119,7 +119,7 @@ void xor_128(BYTE *a, BYTE *b, BYTE *out)
 }
 
 
-void xor_32(BYTE *a, BYTE *b, BYTE *out)
+static void xor_32(BYTE *a, BYTE *b, BYTE *out)
 {
 	PDWORD dwPtrA = (PDWORD) a;
 	PDWORD dwPtrB = (PDWORD) b;
diff --git a/drivers/staging/vt6656/baseband.c b/drivers/staging/vt6656/baseband.c
index d3de94f36c6..29902492975 100644
--- a/drivers/staging/vt6656/baseband.c
+++ b/drivers/staging/vt6656/baseband.c
@@ -989,10 +989,10 @@ BBvSetAntennaMode (PSDevice pDevice, BYTE byAntennaMode)
  * Return Value: none
  *
  */
-BOOL
-BBbVT3184Init (PSDevice pDevice)
+
+BOOL BBbVT3184Init(PSDevice pDevice)
 {
-    NTSTATUS                ntStatus;
+	int ntStatus;
     WORD                    wLength;
     PBYTE                   pbyAddr;
     PBYTE                   pbyAgc;
diff --git a/drivers/staging/vt6656/baseband.h b/drivers/staging/vt6656/baseband.h
index bc4633d5fea..8db8cd07d5f 100644
--- a/drivers/staging/vt6656/baseband.h
+++ b/drivers/staging/vt6656/baseband.h
@@ -104,16 +104,13 @@ BBuGetFrameTime(
      WORD wRate
     );
 
-void
-BBvCaculateParameter (
-      PSDevice pDevice,
-      unsigned int cbFrameLength,
-      WORD wRate,
-      BYTE byPacketType,
-     PWORD pwPhyLen,
-     PBYTE pbyPhySrv,
-     PBYTE pbyPhySgn
-    );
+void BBvCaculateParameter(PSDevice pDevice,
+			  unsigned int cbFrameLength,
+			  WORD wRate,
+			  BYTE byPacketType,
+			  PWORD pwPhyLen,
+			  PBYTE pbyPhySrv,
+			  PBYTE pbyPhySgn);
 
 // timer for antenna diversity
 
@@ -128,7 +125,7 @@ void BBvSoftwareReset(PSDevice pDevice);
 void BBvSetShortSlotTime(PSDevice pDevice);
 void BBvSetVGAGainOffset(PSDevice pDevice, BYTE byData);
 void BBvSetAntennaMode(PSDevice pDevice, BYTE byAntennaMode);
-BOOL BBbVT3184Init (PSDevice pDevice);
+BOOL BBbVT3184Init(PSDevice pDevice);
 void BBvSetDeepSleep(PSDevice pDevice);
 void BBvExitDeepSleep(PSDevice pDevice);
 void BBvUpdatePreEDThreshold(
diff --git a/drivers/staging/vt6656/bssdb.c b/drivers/staging/vt6656/bssdb.c
index 36ed61b595c..a9f68bd5afa 100644
--- a/drivers/staging/vt6656/bssdb.c
+++ b/drivers/staging/vt6656/bssdb.c
@@ -93,10 +93,7 @@ const WORD             awHWRetry1[5][5] = {
 
 void s_vCheckSensitivity(void *hDeviceContext);
 void s_vCheckPreEDThreshold(void *hDeviceContext);
-
-#ifdef Calcu_LinkQual
 void s_uCalculateLinkQual(void *hDeviceContext);
-#endif
 
 /*---------------------  Export Variables  --------------------------*/
 
@@ -135,7 +132,7 @@ PKnownBSS BSSpSearchBSSList(void *hDeviceContext,
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BSSpSearchBSSList BSSID[%02X %02X %02X-%02X %02X %02X]\n",
                             *pbyDesireBSSID,*(pbyDesireBSSID+1),*(pbyDesireBSSID+2),
                             *(pbyDesireBSSID+3),*(pbyDesireBSSID+4),*(pbyDesireBSSID+5));
-        if ((!IS_BROADCAST_ADDRESS(pbyDesireBSSID)) &&
+	if ((!is_broadcast_ether_addr(pbyDesireBSSID)) &&
 	     (memcmp(pbyDesireBSSID, ZeroBSSID, 6)!= 0)){
             pbyBSSID = pbyDesireBSSID;
         }
@@ -156,7 +153,7 @@ PKnownBSS BSSpSearchBSSList(void *hDeviceContext,
 
             if ((pCurrBSS->bActive) &&
                 (pCurrBSS->bSelected == FALSE)) {
-                if (IS_ETH_ADDRESS_EQUAL(pCurrBSS->abyBSSID, pbyBSSID)) {
+		    if (!compare_ether_addr(pCurrBSS->abyBSSID, pbyBSSID)) {
                     if (pSSID != NULL) {
                         // compare ssid
                         if ( !memcmp(pSSID->abySSID,
@@ -296,7 +293,8 @@ void BSSvClearBSSList(void *hDeviceContext, BOOL bKeepCurrBSSID)
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         if (bKeepCurrBSSID) {
             if (pMgmt->sBSSList[ii].bActive &&
-                IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pMgmt->abyCurrBSSID)) {
+		!compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
+				    pMgmt->abyCurrBSSID)) {
  //mike mark: there are two same BSSID in list if that AP is in hidden ssid mode,one 's SSID is null,
  //                 but other's is obvious, so if it acssociate with your STA  exactly,you must keep two
  //                 of them!!!!!!!!!
@@ -341,7 +339,7 @@ PKnownBSS BSSpAddrIsInBSSList(void *hDeviceContext,
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
         pBSSList = &(pMgmt->sBSSList[ii]);
         if (pBSSList->bActive) {
-            if (IS_ETH_ADDRESS_EQUAL(pBSSList->abyBSSID, abyBSSID)) {
+		if (!compare_ether_addr(pBSSList->abyBSSID, abyBSSID)) {
                 if (pSSID->len == ((PWLAN_IE_SSID)pBSSList->abySSID)->len){
                     if (memcmp(pSSID->abySSID,
                             ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
@@ -699,12 +697,14 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
         pBSSList->byRSSIStatCnt %= RSSI_STAT_COUNT;
         pBSSList->ldBmAverage[pBSSList->byRSSIStatCnt] = ldBm;
         ldBmSum = 0;
-        for(ii=0, jj=0;ii<RSSI_STAT_COUNT;ii++) {
-            if (pBSSList->ldBmAverage[ii] != 0) {
-                pBSSList->ldBmMAX = max(pBSSList->ldBmAverage[ii], ldBm);
-                ldBmSum += pBSSList->ldBmAverage[ii];
-                jj++;
-            }
+	for (ii = 0, jj = 0; ii < RSSI_STAT_COUNT; ii++) {
+		if (pBSSList->ldBmAverage[ii] != 0) {
+			pBSSList->ldBmMAX =
+				max(pBSSList->ldBmAverage[ii], ldBm);
+			ldBmSum +=
+				pBSSList->ldBmAverage[ii];
+			jj++;
+		}
         }
         pBSSList->ldBmAverRange = ldBmSum /jj;
     }
@@ -714,28 +714,6 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
         pBSSList->uIELength = WLAN_BEACON_FR_MAXLEN;
     memcpy(pBSSList->abyIEs, pbyIEs, pBSSList->uIELength);
 
-//mike add: if  the AP in this pBSSList is hidden ssid and we can find two of them,
-//                  you need upgrade the other related pBSSList of which ssid is obvious,
-//                  for these two AP is the same one!!!!
-/********judge by:BSSID is the same,but ssid is different!*****************/
-#if 0
-   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
-      if (IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pBSSList->abyBSSID)) {   //BSSID is the same!
-         if (memcmp(((PWLAN_IE_SSID)pMgmt->sBSSList[ii].abySSID)->abySSID,                  //ssid is different??
-		 	      ((PWLAN_IE_SSID)pBSSList->abySSID)->abySSID,
-		 	      ((PWLAN_IE_SSID)pBSSList->abySSID)->len) != 0) {
-                  //reserve temp
-               memset(abyTmpSSID,0,sizeof(abyTmpSSID));
-	      memcpy(abyTmpSSID,pMgmt->sBSSList[ii].abySSID,sizeof(abyTmpSSID));
-		  //upgrade the other one pBSSList
-	      memcpy(&(pMgmt->sBSSList[ii]),pBSSList,sizeof(KnownBSS));
-		  //recover ssid info
-	      memcpy(pMgmt->sBSSList[ii].abySSID,abyTmpSSID,sizeof(abyTmpSSID));
-           }
-       }
-    }
-#endif
-
     return TRUE;
 }
 
@@ -755,7 +733,7 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
 
 BOOL BSSbIsSTAInNodeDB(void *hDeviceContext,
 		       PBYTE abyDstAddr,
-		       PUINT puNodeIndex)
+		       unsigned int *puNodeIndex)
 {
     PSDevice        pDevice = (PSDevice)hDeviceContext;
     PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
@@ -764,7 +742,8 @@ BOOL BSSbIsSTAInNodeDB(void *hDeviceContext,
     // Index = 0 reserved for AP Node
     for (ii = 1; ii < (MAX_NODE_NUM + 1); ii++) {
         if (pMgmt->sNodeDBTable[ii].bActive) {
-            if (IS_ETH_ADDRESS_EQUAL(abyDstAddr, pMgmt->sNodeDBTable[ii].abyMACAddr)) {
+		if (!compare_ether_addr(abyDstAddr,
+					pMgmt->sNodeDBTable[ii].abyMACAddr)) {
                 *puNodeIndex = ii;
                 return TRUE;
             }
@@ -786,7 +765,7 @@ BOOL BSSbIsSTAInNodeDB(void *hDeviceContext,
  *    None
  *
 -*/
-void BSSvCreateOneNode(void *hDeviceContext, PUINT puNodeIndex)
+void BSSvCreateOneNode(void *hDeviceContext, unsigned int *puNodeIndex)
 {
 
     PSDevice     pDevice = (PSDevice)hDeviceContext;
@@ -1023,7 +1002,6 @@ if(pDevice->byReAssocCount > 0) {
    	pDevice->byReAssocCount = 0;
 }
 
-#ifdef SndEvt_ToAPI
 if((pMgmt->eCurrState!=WMAC_STATE_ASSOC) &&
      (pMgmt->eLastState==WMAC_STATE_ASSOC))
 {
@@ -1033,11 +1011,8 @@ if((pMgmt->eCurrState!=WMAC_STATE_ASSOC) &&
   wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
 }
  pMgmt->eLastState = pMgmt->eCurrState ;
-#endif
 
-#ifdef Calcu_LinkQual
    s_uCalculateLinkQual((void *)pDevice);
-#endif
 
     for (ii = 0; ii < (MAX_NODE_NUM + 1); ii++) {
 
@@ -1422,21 +1397,25 @@ void BSSvUpdateNodeTxCounter(void *hDeviceContext,
                      (wRate < RATE_18M) ) {
                     pMgmt->sNodeDBTable[0].uTxFail[wRate]+=byTxRetry;
                 } else if (byFallBack == AUTO_FB_0) {
-                    for(ii=0;ii<byTxRetry;ii++) {
-                        if (ii < 5)
-                            wFallBackRate = awHWRetry0[wRate-RATE_18M][ii];
-                        else
-                            wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
-                        pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
-                    }
+			for (ii = 0; ii < byTxRetry; ii++) {
+				if (ii < 5)
+					wFallBackRate =
+						awHWRetry0[wRate-RATE_18M][ii];
+				else
+					wFallBackRate =
+						awHWRetry0[wRate-RATE_18M][4];
+				pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
+			}
                 } else if (byFallBack == AUTO_FB_1) {
-                    for(ii=0;ii<byTxRetry;ii++) {
-                        if (ii < 5)
-                            wFallBackRate = awHWRetry1[wRate-RATE_18M][ii];
-                        else
-                            wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
-                        pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
-                    }
+			for (ii = 0; ii < byTxRetry; ii++) {
+				if (ii < 5)
+					wFallBackRate =
+						awHWRetry1[wRate-RATE_18M][ii];
+				else
+					wFallBackRate =
+						awHWRetry1[wRate-RATE_18M][4];
+				pMgmt->sNodeDBTable[0].uTxFail[wFallBackRate]++;
+			}
                 }
             }
         };
@@ -1476,21 +1455,23 @@ void BSSvUpdateNodeTxCounter(void *hDeviceContext,
                          (wRate < RATE_18M) ) {
                         pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wRate]+=byTxRetry;
                     } else if (byFallBack == AUTO_FB_0) {
-                        for(ii=0;ii<byTxRetry;ii++) {
-                            if (ii < 5)
-                                wFallBackRate = awHWRetry0[wRate-RATE_18M][ii];
-                            else
-                                wFallBackRate = awHWRetry0[wRate-RATE_18M][4];
-                            pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
+			for (ii = 0; ii < byTxRetry; ii++) {
+				if (ii < 5)
+					wFallBackRate =
+						awHWRetry0[wRate-RATE_18M][ii];
+				else
+					wFallBackRate =
+						awHWRetry0[wRate-RATE_18M][4];
+				pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
                         }
                     } else if (byFallBack == AUTO_FB_1) {
-                        for(ii=0;ii<byTxRetry;ii++) {
-                            if (ii < 5)
+		      for (ii = 0; ii < byTxRetry; ii++) {
+			if (ii < 5)
                                 wFallBackRate = awHWRetry1[wRate-RATE_18M][ii];
-                            else
+			else
                                 wFallBackRate = awHWRetry1[wRate-RATE_18M][4];
-                            pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
-                        }
+			pMgmt->sNodeDBTable[uNodeIndex].uTxFail[wFallBackRate]++;
+		      }
                     }
                 }
             };
@@ -1587,7 +1568,6 @@ void s_vCheckSensitivity(void *hDeviceContext)
     }
 }
 
-#ifdef Calcu_LinkQual
 void s_uCalculateLinkQual(void *hDeviceContext)
 {
    PSDevice        pDevice = (PSDevice)hDeviceContext;
@@ -1632,7 +1612,6 @@ else
    pDevice->scStatistic.TxRetryOkCount = 0;
    return;
 }
-#endif
 
 void BSSvClearAnyBSSJoinRecord(void *hDeviceContext)
 {
diff --git a/drivers/staging/vt6656/bssdb.h b/drivers/staging/vt6656/bssdb.h
index 9686d8600d6..a8f97ebb659 100644
--- a/drivers/staging/vt6656/bssdb.h
+++ b/drivers/staging/vt6656/bssdb.h
@@ -40,7 +40,7 @@
 
 #define MAX_NODE_NUM             64
 #define MAX_BSS_NUM              42
-#define LOST_BEACON_COUNT      	 10   // 10 sec, XP defined
+#define LOST_BEACON_COUNT        10   /* 10 sec, XP defined */
 #define MAX_PS_TX_BUF            32   // sta max power saving tx buf
 #define ADHOC_LOST_BEACON_COUNT  30   // 30 sec, beacon lost for adhoc only
 #define MAX_INACTIVE_COUNT       300  // 300 sec, inactive STA node refresh
@@ -83,13 +83,13 @@
 typedef struct tagSERPObject {
     BOOL    bERPExist;
     BYTE    byERP;
-}ERPObject, *PERPObject;
+} ERPObject, *PERPObject;
 
 
 typedef struct tagSRSNCapObject {
     BOOL    bRSNCapExist;
     WORD    wRSNCap;
-}SRSNCapObject, *PSRSNCapObject;
+} SRSNCapObject, *PSRSNCapObject;
 
 // BSS info(AP)
 #pragma pack(1)
@@ -153,7 +153,7 @@ typedef struct tagKnownBSS {
     SRSNCapObject   sRSNCapObj;
     BYTE            abyIEs[1024];   // don't move this field !!
 
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 KnownBSS , *PKnownBSS;
 
 
@@ -278,9 +278,9 @@ BOOL BSSbUpdateToBSSList(void *hDeviceContext,
 
 BOOL BSSbIsSTAInNodeDB(void *hDeviceContext,
 		       PBYTE abyDstAddr,
-		       PUINT puNodeIndex);
+		       unsigned int *puNodeIndex);
 
-void BSSvCreateOneNode(void *hDeviceContext, PUINT puNodeIndex);
+void BSSvCreateOneNode(void *hDeviceContext, unsigned int *puNodeIndex);
 
 void BSSvUpdateAPNode(void *hDeviceContext,
 		      PWORD pwCapInfo,
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index fe4ec913ffe..35bf4fda330 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -457,12 +457,11 @@ void CARDvSetRSPINF(void *pDeviceHandler, BYTE byBBType)
     abyData[14] = abySignal[3];
     abyData[15] = abyServ[3];
 
-    for(i=0;i<9;i++) {
-        abyData[16+i*2] = abyTxRate[i];
-        abyData[16+i*2+1] = abyRsvTime[i];
+    for (i = 0; i < 9; i++) {
+	abyData[16+i*2] = abyTxRate[i];
+	abyData[16+i*2+1] = abyRsvTime[i];
     }
 
-
     CONTROLnsRequestOut(pDevice,
                         MESSAGE_TYPE_WRITE,
                         MAC_REG_RSPINF_B_1,
diff --git a/drivers/staging/vt6656/channel.c b/drivers/staging/vt6656/channel.c
index f49b6e13339..6ad03e492ed 100644
--- a/drivers/staging/vt6656/channel.c
+++ b/drivers/staging/vt6656/channel.c
@@ -441,11 +441,10 @@ void CHvInitChannelTable(void *pDeviceHandler)
 {
     PSDevice    pDevice = (PSDevice) pDeviceHandler;
     BOOL        bMultiBand = FALSE;
-    unsigned int        ii;
+    unsigned int ii;
 
-    for(ii=1;ii<=CB_MAX_CHANNEL;ii++) {
-        sChannelTbl[ii].bValid = FALSE;
-    }
+    for (ii = 1; ii <= CB_MAX_CHANNEL; ii++)
+	sChannelTbl[ii].bValid = FALSE;
 
     switch (pDevice->byRFType) {
         case RF_AL2230:
@@ -464,43 +463,43 @@ void CHvInitChannelTable(void *pDeviceHandler)
     if ((pDevice->dwDiagRefCount != 0) ||
         (pDevice->b11hEable == TRUE)) {
         if (bMultiBand == TRUE) {
-            for(ii=0;ii<CB_MAX_CHANNEL;ii++) {
-                sChannelTbl[ii+1].bValid = TRUE;
+		for (ii = 0; ii < CB_MAX_CHANNEL; ii++) {
+			sChannelTbl[ii+1].bValid = TRUE;
                 //pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
                 //pDevice->abyLocalPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
-            }
-            for(ii=0;ii<CB_MAX_CHANNEL_24G;ii++) {
+		}
+		for (ii = 0; ii < CB_MAX_CHANNEL_24G; ii++) {
                 //pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
                 //pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
-            }
+		}
         } else {
-            for(ii=0;ii<CB_MAX_CHANNEL_24G;ii++) {
-                sChannelTbl[ii+1].bValid = TRUE;
+		for (ii = 0; ii < CB_MAX_CHANNEL_24G; ii++) {
+			sChannelTbl[ii+1].bValid = TRUE;
                 //pDevice->abyRegPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
                 //pDevice->abyLocalPwr[ii+1] = pDevice->abyCCKDefaultPwr[ii+1];
-            }
+		}
         }
     } else if (pDevice->byZoneType <= CCODE_MAX) {
         if (bMultiBand == TRUE) {
-            for(ii=0;ii<CB_MAX_CHANNEL;ii++) {
-                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-                    sChannelTbl[ii+1].bValid = TRUE;
+		for (ii = 0; ii < CB_MAX_CHANNEL; ii++) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+				sChannelTbl[ii+1].bValid = TRUE;
                     //pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
                     //pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                }
-            }
+			}
+		}
         } else {
-            for(ii=0;ii<CB_MAX_CHANNEL_24G;ii++) {
-                if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
-                    sChannelTbl[ii+1].bValid = TRUE;
+		for (ii = 0; ii < CB_MAX_CHANNEL_24G; ii++) {
+			if (ChannelRuleTab[pDevice->byZoneType].bChannelIdxList[ii] != 0) {
+				sChannelTbl[ii+1].bValid = TRUE;
                     //pDevice->abyRegPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
                     //pDevice->abyLocalPwr[ii+1] = ChannelRuleTab[pDevice->byZoneType].byPower[ii];
-                }
-            }
+			}
+		}
         }
     }
     DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO"Zone=[%d][%c][%c]!!\n",pDevice->byZoneType,ChannelRuleTab[pDevice->byZoneType].chCountryCode[0],ChannelRuleTab[pDevice->byZoneType].chCountryCode[1]);
-    for(ii=0;ii<CB_MAX_CHANNEL;ii++) {
+    for (ii = 0; ii < CB_MAX_CHANNEL; ii++) {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Channel[%d] is [%d]\n",sChannelTbl[ii].byChannelNumber,sChannelTbl[ii+1].bValid);
         /*if (pDevice->abyRegPwr[ii+1] == 0) {
             pDevice->abyRegPwr[ii+1] = pDevice->abyOFDMDefaultPwr[ii+1];
diff --git a/drivers/staging/vt6656/channel.h b/drivers/staging/vt6656/channel.h
index 91c2ffc6f1f..e7b3c123182 100644
--- a/drivers/staging/vt6656/channel.h
+++ b/drivers/staging/vt6656/channel.h
@@ -35,23 +35,21 @@
 /*---------------------  Export Definitions -------------------------*/
 
 /*---------------------  Export Classes  ----------------------------*/
+
 typedef struct tagSChannelTblElement {
     BYTE    byChannelNumber;
     unsigned int    uFrequency;
     BOOL    bValid;
-}SChannelTblElement, *PSChannelTblElement;
+} SChannelTblElement, *PSChannelTblElement;
 
 /*---------------------  Export Variables  --------------------------*/
 
 /*---------------------  Export Functions  --------------------------*/
+
 BOOL    ChannelValid(unsigned int CountryCode, unsigned int ChannelNum);
 void    CHvInitChannelTable(void *pDeviceHandler);
 BYTE    CHbyGetChannelMapping(BYTE byChannelNumber);
 
-BOOL
-CHvChannelGetList (
-      unsigned int       uCountryCodeIdx,
-     PBYTE      pbyChannelTable
-    );
+BOOL CHvChannelGetList(unsigned int uCountryCodeIdx, PBYTE pbyChannelTable);
 
-#endif  /* _REGULATE_H_ */
+#endif  /* _CHANNEL_H_ */
diff --git a/drivers/staging/vt6656/control.c b/drivers/staging/vt6656/control.c
index 8aab6718ff4..5d8c5719419 100644
--- a/drivers/staging/vt6656/control.c
+++ b/drivers/staging/vt6656/control.c
@@ -72,7 +72,7 @@ void ControlvWriteByte(PSDevice pDevice, BYTE byRegType, BYTE byRegOfs,
 void ControlvReadByte(PSDevice pDevice, BYTE byRegType, BYTE byRegOfs,
 			PBYTE pbyData)
 {
-	NTSTATUS	ntStatus;
+	int ntStatus;
 	BYTE	byData1;
 	ntStatus = CONTROLnsRequestIn(pDevice,
 					MESSAGE_TYPE_READ,
diff --git a/drivers/staging/vt6656/control.h b/drivers/staging/vt6656/control.h
index 146b450e13d..bbe610fd8b5 100644
--- a/drivers/staging/vt6656/control.h
+++ b/drivers/staging/vt6656/control.h
@@ -36,16 +36,14 @@
 
 /*---------------------  Export Definitions -------------------------*/
 
+#define CONTROLnsRequestOut(Device, Request, Value, Index, Length, Buffer) \
+	PIPEnsControlOut(Device, Request, Value, Index, Length, Buffer)
 
-#define CONTROLnsRequestOut( Device,Request,Value,Index,Length,Buffer) \
-        PIPEnsControlOut( Device,Request,Value,Index,Length,Buffer)
-
-#define CONTROLnsRequestOutAsyn( Device,Request,Value,Index,Length,Buffer) \
-        PIPEnsControlOutAsyn( Device,Request,Value,Index,Length,Buffer)
-
-#define CONTROLnsRequestIn( Device,Request,Value,Index,Length,Buffer) \
-        PIPEnsControlIn( Device,Request,Value,Index,Length,Buffer)
+#define CONTROLnsRequestOutAsyn(Device, Request, Value, Index, Length, Buffer) \
+	PIPEnsControlOutAsyn(Device, Request, Value, Index, Length, Buffer)
 
+#define CONTROLnsRequestIn(Device, Request, Value, Index, Length, Buffer) \
+	PIPEnsControlIn(Device, Request, Value, Index, Length, Buffer)
 
 /*---------------------  Export Classes  ----------------------------*/
 
diff --git a/drivers/staging/vt6656/datarate.c b/drivers/staging/vt6656/datarate.c
index 2e183ddbfd0..5c2719fa72f 100644
--- a/drivers/staging/vt6656/datarate.c
+++ b/drivers/staging/vt6656/datarate.c
@@ -72,7 +72,7 @@ void s_vResetCounter(PKnownNodeDB psNodeDBTable)
     BYTE            ii;
 
     // clear statistic counter for auto_rate
-    for(ii=0;ii<=MAX_RATE;ii++) {
+    for (ii = 0; ii <= MAX_RATE; ii++) {
         psNodeDBTable->uTxOk[ii] = 0;
         psNodeDBTable->uTxFail[ii] = 0;
     }
@@ -309,7 +309,6 @@ RATEvTxRateFallBack(
 {
 PSDevice        pDevice = (PSDevice) pDeviceHandler;
 PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
-#if 1  //mike fixed old: use packet lose ratio algorithm to control rate
 WORD            wIdxDownRate = 0;
 unsigned int            ii;
 BOOL            bAutoRate[MAX_RATE]    = {TRUE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE,TRUE,TRUE,TRUE,TRUE,TRUE};
@@ -337,7 +336,7 @@ DWORD           dwTxDiff = 0;
         psNodeDBTable->uTimeCount = 0;
     }
 
-    for(ii=0;ii<MAX_RATE;ii++) {
+    for (ii = 0; ii < MAX_RATE; ii++) {
         if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
             if (bAutoRate[ii] == TRUE) {
                 wIdxUpRate = (WORD) ii;
@@ -347,7 +346,7 @@ DWORD           dwTxDiff = 0;
         }
     }
 
-    for(ii=0;ii<=psNodeDBTable->wTxDataRate;ii++) {
+    for (ii = 0; ii <= psNodeDBTable->wTxDataRate; ii++) {
         if ( (psNodeDBTable->uTxOk[ii] != 0) ||
              (psNodeDBTable->uTxFail[ii] != 0) ) {
             dwThroughputTbl[ii] *= psNodeDBTable->uTxOk[ii];
@@ -362,7 +361,7 @@ DWORD           dwTxDiff = 0;
     dwThroughput = dwThroughputTbl[psNodeDBTable->wTxDataRate];
 
     wIdxDownRate = psNodeDBTable->wTxDataRate;
-    for(ii = psNodeDBTable->wTxDataRate; ii > 0;) {
+    for (ii = psNodeDBTable->wTxDataRate; ii > 0;) {
         ii--;
         if ( (dwThroughputTbl[ii] > dwThroughput) &&
              (bAutoRate[ii]==TRUE) ) {
@@ -389,66 +388,6 @@ DWORD           dwTxDiff = 0;
     s_vResetCounter(psNodeDBTable);
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Rate: %d, U:%d, D:%d\n", (int)psNodeDBTable->wTxDataRate, (int)wIdxUpRate, (int)wIdxDownRate);
     return;
-#else  //mike fixed new: use differ-signal strength to control rate
-WORD            wIdxUpRate = 0;
-BOOL            bAutoRate[MAX_RATE]    = {TRUE,TRUE,TRUE,TRUE,FALSE,FALSE,TRUE,TRUE,TRUE,TRUE,TRUE,TRUE};
-unsigned int            ii;
-long  ldBm;
-
-    if (pMgmt->eScanState != WMAC_NO_SCANNING) {
-        // Don't do Fallback when scanning Channel
-        return;
-    }
-
-    for(ii=0;ii<MAX_RATE;ii++) {
-        if (psNodeDBTable->wSuppRate & (0x0001<<ii)) {
-            if (bAutoRate[ii] == TRUE) {
-                wIdxUpRate = (WORD) ii;
-            }
-        } else {
-            bAutoRate[ii] = FALSE;
-        }
-    }
-
-         RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
-
-	if (ldBm > -55) {
-		if ( psNodeDBTable->wSuppRate & (0x0001<<RATE_54M) )  //11a/g
-      		{
-	  		psNodeDBTable->wTxDataRate = RATE_54M;
-		}
-		else{ //11b
-	  		psNodeDBTable->wTxDataRate = RATE_11M;
-		}
-	}
-
-if (wIdxUpRate == RATE_54M ) {     //11a/g
-		if (ldBm > -56 )
-			psNodeDBTable->wTxDataRate = RATE_54M;
-		else if (ldBm > -61 )
-			psNodeDBTable->wTxDataRate = RATE_48M;
-		else if (ldBm > -66 )
-			psNodeDBTable->wTxDataRate = RATE_36M;
-		else if (ldBm > -72 )
-			psNodeDBTable->wTxDataRate = RATE_24M;
-		else if (ldBm > -80 )
-			psNodeDBTable->wTxDataRate = RATE_5M;
-		else {
-			psNodeDBTable->wTxDataRate = RATE_1M;
-			//increasingVGA = TRUE;
-		}
-	}
-	else {  //11b
-		if (ldBm > -65 )
-			psNodeDBTable->wTxDataRate = RATE_11M;
-		else if (ldBm > -75 )
-			psNodeDBTable->wTxDataRate = RATE_5M;
-		else
-			psNodeDBTable->wTxDataRate = RATE_1M;
-	}
-
-   return;
-#endif
 }
 
 /*+
diff --git a/drivers/staging/vt6656/desc.h b/drivers/staging/vt6656/desc.h
index 07f794ec6db..767112b3c4a 100644
--- a/drivers/staging/vt6656/desc.h
+++ b/drivers/staging/vt6656/desc.h
@@ -51,7 +51,6 @@
 
 #define MAX_INTERRUPT_SIZE              32
 
-
 #define RX_BLOCKS           64          // form 0x60 to 0xA0
 #define TX_BLOCKS           32          // from 0xA0 to 0xC0
 
@@ -63,8 +62,6 @@
 #define CB_RD_NUM           64          // default # of RD
 #define CB_TD_NUM           64          // default # of TD
 
-
-
 //
 // Bits in the RSR register
 //
@@ -87,7 +84,6 @@
 #define NEWRSR_BCNHITAID    0x02        // 0000 0010
 #define NEWRSR_BCNHITAID0   0x01        // 0000 0001
 
-
 //
 // Bits in the TSR register
 //
@@ -96,17 +92,13 @@
 #define TSR_ACKDATA         0x02        // 0000 0010
 #define TSR_VALID           0x01        // 0000 0001
 
-
 #define CB_PROTOCOL_RESERVED_SECTION    16
 
-
-
 // if retrys excess 15 times , tx will abort, and
 // if tx fifo underflow, tx will fail
 // we should try to resend it
 #define CB_MAX_TX_ABORT_RETRY   3
 
-
 #define FIFOCTL_AUTO_FB_1   0x1000 // 0001 0000 0000 0000
 #define FIFOCTL_AUTO_FB_0   0x0800 // 0000 1000 0000 0000
 #define FIFOCTL_GRPACK      0x0400 // 0000 0100 0000 0000
@@ -137,7 +129,6 @@
 #define FRAGCTL_STAFRAG     0x0001 // 0000 0000 0000 0001
 #define FRAGCTL_NONFRAG     0x0000 // 0000 0000 0000 0000
 
-
 //#define TYPE_AC0DMA     0
 //#define TYPE_TXDMA0     1
 #define TYPE_TXDMA0     0
@@ -152,8 +143,6 @@
 #define TYPE_RXDMA1     1
 #define TYPE_MAXRD      2
 
-
-
 // TD_INFO flags control bit
 #define TD_FLAGS_NETIF_SKB               0x01       // check if need release skb
 #define TD_FLAGS_PRIV_SKB                0x02       // check if called from private skb(hostap)
@@ -162,7 +151,6 @@
 
 /*---------------------  Export Types  ------------------------------*/
 
-
 //
 // RsvTime buffer header
 //
@@ -173,8 +161,9 @@ typedef struct tagSRrvTime_gRTS {
     WORD        wReserved;
     WORD        wTxRrvTime_b;
     WORD        wTxRrvTime_a;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRrvTime_gRTS, *PSRrvTime_gRTS;
+
 typedef const SRrvTime_gRTS *PCSRrvTime_gRTS;
 
 typedef struct tagSRrvTime_gCTS {
@@ -182,22 +171,25 @@ typedef struct tagSRrvTime_gCTS {
     WORD        wReserved;
     WORD        wTxRrvTime_b;
     WORD        wTxRrvTime_a;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRrvTime_gCTS, *PSRrvTime_gCTS;
+
 typedef const SRrvTime_gCTS *PCSRrvTime_gCTS;
 
 typedef struct tagSRrvTime_ab {
     WORD        wRTSTxRrvTime;
     WORD        wTxRrvTime;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRrvTime_ab, *PSRrvTime_ab;
+
 typedef const SRrvTime_ab *PCSRrvTime_ab;
 
 typedef struct tagSRrvTime_atim {
     WORD        wCTSTxRrvTime_ba;
     WORD        wTxRrvTime_a;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRrvTime_atim, *PSRrvTime_atim;
+
 typedef const SRrvTime_atim *PCSRrvTime_atim;
 
 //
@@ -208,8 +200,9 @@ typedef struct tagSRTSData {
     WORD    wDurationID;
     BYTE    abyRA[ETH_ALEN];
     BYTE    abyTA[ETH_ALEN];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRTSData, *PSRTSData;
+
 typedef const SRTSData *PCSRTSData;
 
 typedef struct tagSRTS_g {
@@ -224,11 +217,10 @@ typedef struct tagSRTS_g {
     WORD        wDuration_bb;
     WORD        wReserved;
     SRTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRTS_g, *PSRTS_g;
 typedef const SRTS_g *PCSRTS_g;
 
-
 typedef struct tagSRTS_g_FB {
     BYTE        bySignalField_b;
     BYTE        byServiceField_b;
@@ -245,10 +237,10 @@ typedef struct tagSRTS_g_FB {
     WORD        wRTSDuration_ba_f1;
     WORD        wRTSDuration_aa_f1;
     SRTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRTS_g_FB, *PSRTS_g_FB;
-typedef const SRTS_g_FB *PCSRTS_g_FB;
 
+typedef const SRTS_g_FB *PCSRTS_g_FB;
 
 typedef struct tagSRTS_ab {
     BYTE        bySignalField;
@@ -257,10 +249,10 @@ typedef struct tagSRTS_ab {
     WORD        wDuration;
     WORD        wReserved;
     SRTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRTS_ab, *PSRTS_ab;
-typedef const SRTS_ab *PCSRTS_ab;
 
+typedef const SRTS_ab *PCSRTS_ab;
 
 typedef struct tagSRTS_a_FB {
     BYTE        bySignalField;
@@ -271,8 +263,9 @@ typedef struct tagSRTS_a_FB {
     WORD        wRTSDuration_f0;
     WORD        wRTSDuration_f1;
     SRTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SRTS_a_FB, *PSRTS_a_FB;
+
 typedef const SRTS_a_FB *PCSRTS_a_FB;
 
 
@@ -284,7 +277,7 @@ typedef struct tagSCTSData {
     WORD    wDurationID;
     BYTE    abyRA[ETH_ALEN];
     WORD    wReserved;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SCTSData, *PSCTSData;
 
 typedef struct tagSCTS {
@@ -294,8 +287,9 @@ typedef struct tagSCTS {
     WORD        wDuration_ba;
     WORD        wReserved;
     SCTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SCTS, *PSCTS;
+
 typedef const SCTS *PCSCTS;
 
 typedef struct tagSCTS_FB {
@@ -307,10 +301,10 @@ typedef struct tagSCTS_FB {
     WORD        wCTSDuration_ba_f0;
     WORD        wCTSDuration_ba_f1;
     SCTSData    Data;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SCTS_FB, *PSCTS_FB;
-typedef const SCTS_FB *PCSCTS_FB;
 
+typedef const SCTS_FB *PCSCTS_FB;
 
 //
 // Tx FIFO header
@@ -321,14 +315,14 @@ typedef struct tagSTxBufHead {
     WORD    wTimeStamp;
     WORD    wFragCtl;
     WORD    wReserved;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxBufHead, *PSTxBufHead;
 typedef const STxBufHead *PCSTxBufHead;
 
 typedef struct tagSTxShortBufHead {
     WORD    wFIFOCtl;
     WORD    wTimeStamp;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxShortBufHead, *PSTxShortBufHead;
 typedef const STxShortBufHead *PCSTxShortBufHead;
 
@@ -346,8 +340,9 @@ typedef struct tagSTxDataHead_g {
     WORD    wDuration_a;
     WORD    wTimeStampOff_b;
     WORD    wTimeStampOff_a;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxDataHead_g, *PSTxDataHead_g;
+
 typedef const STxDataHead_g *PCSTxDataHead_g;
 
 typedef struct tagSTxDataHead_g_FB {
@@ -363,22 +358,20 @@ typedef struct tagSTxDataHead_g_FB {
     WORD    wDuration_a_f1;
     WORD    wTimeStampOff_b;
     WORD    wTimeStampOff_a;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxDataHead_g_FB, *PSTxDataHead_g_FB;
 typedef const STxDataHead_g_FB *PCSTxDataHead_g_FB;
 
-
 typedef struct tagSTxDataHead_ab {
     BYTE    bySignalField;
     BYTE    byServiceField;
     WORD    wTransmitLength;
     WORD    wDuration;
     WORD    wTimeStampOff;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxDataHead_ab, *PSTxDataHead_ab;
 typedef const STxDataHead_ab *PCSTxDataHead_ab;
 
-
 typedef struct tagSTxDataHead_a_FB {
     BYTE    bySignalField;
     BYTE    byServiceField;
@@ -387,7 +380,7 @@ typedef struct tagSTxDataHead_a_FB {
     WORD    wTimeStampOff;
     WORD    wDuration_f0;
     WORD    wDuration_f1;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 STxDataHead_a_FB, *PSTxDataHead_a_FB;
 typedef const STxDataHead_a_FB *PCSTxDataHead_a_FB;
 
@@ -398,23 +391,23 @@ typedef struct tagSMICHDRHead {
     DWORD   adwHDR0[4];
     DWORD   adwHDR1[4];
     DWORD   adwHDR2[4];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SMICHDRHead, *PSMICHDRHead;
+
 typedef const SMICHDRHead *PCSMICHDRHead;
 
 typedef struct tagSBEACONCtl {
     DWORD   BufReady : 1;
-    DWORD   TSF      : 15;
-    DWORD   BufLen   : 11;
+    DWORD   TSF : 15;
+    DWORD   BufLen : 11;
     DWORD   Reserved : 5;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SBEACONCtl;
 
-
 typedef struct tagSSecretKey {
     DWORD   dwLowDword;
     BYTE    byHighByte;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SSecretKey;
 
 typedef struct tagSKeyEntry {
@@ -426,7 +419,7 @@ typedef struct tagSKeyEntry {
     DWORD dwKey2[4];
     DWORD dwKey3[4];
     DWORD dwKey4[4];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SKeyEntry;
 /*---------------------  Export Macros ------------------------------*/
 
diff --git a/drivers/staging/vt6656/device.h b/drivers/staging/vt6656/device.h
index ef9fd97d3ca..b9852aa22c0 100644
--- a/drivers/staging/vt6656/device.h
+++ b/drivers/staging/vt6656/device.h
@@ -71,9 +71,6 @@
 #define WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 #endif
 
-//2007-0920-01<Add>by MikeLiu
-#ifndef SndEvt_ToAPI
-#define SndEvt_ToAPI
 //please copy below macro to driver_event.c for API
 #define RT_INSMOD_EVENT_FLAG                             0x0101
 #define RT_UPDEV_EVENT_FLAG                               0x0102
@@ -81,7 +78,6 @@
 #define RT_WPACONNECTED_EVENT_FLAG             0x0104
 #define RT_DOWNDEV_EVENT_FLAG                        0x0105
 #define RT_RMMOD_EVENT_FLAG                              0x0106
-#endif
 
 //
 // device specific
@@ -109,7 +105,6 @@
 #define MAX_MULTICAST_ADDRESS_NUM       32
 #define MULTICAST_ADDRESS_LIST_SIZE     (MAX_MULTICAST_ADDRESS_NUM * ETH_ALEN)
 
-
 //#define OP_MODE_INFRASTRUCTURE  0
 //#define OP_MODE_ADHOC           1
 //#define OP_MODE_AP              2
@@ -130,8 +125,6 @@
 #define KEYSEL_TKIP                     2
 #define KEYSEL_CCMP                     3
 
-
-
 #define AUTO_FB_NONE            0
 #define AUTO_FB_0               1
 #define AUTO_FB_1               2
@@ -162,8 +155,6 @@
 #define BB_VGA_LEVEL            4
 #define BB_VGA_CHANGE_THRESHOLD 3
 
-
-
 #ifndef RUN_AT
 #define RUN_AT(x)                       (jiffies+(x))
 #endif
@@ -175,24 +166,23 @@
 
 /*---------------------  Export Types  ------------------------------*/
 
-#define DBG_PRT(l, p, args...) {if (l<=msglevel) printk( p ,##args);}
-#define PRINT_K(p, args...) {if (PRIVATE_Message) printk( p ,##args);}
+#define DBG_PRT(l, p, args...) { if (l <= msglevel) printk(p, ##args); }
+#define PRINT_K(p, args...) { if (PRIVATE_Message) printk(p, ##args); }
 
 typedef enum __device_msg_level {
-    MSG_LEVEL_ERR=0,            //Errors that will cause abnormal operation.
-    MSG_LEVEL_NOTICE=1,         //Some errors need users to be notified.
-    MSG_LEVEL_INFO=2,           //Normal message.
-    MSG_LEVEL_VERBOSE=3,        //Will report all trival errors.
-    MSG_LEVEL_DEBUG=4           //Only for debug purpose.
+	MSG_LEVEL_ERR = 0,            /* Errors causing abnormal operation */
+	MSG_LEVEL_NOTICE = 1,         /* Errors needing user notification */
+	MSG_LEVEL_INFO = 2,           /* Normal message. */
+	MSG_LEVEL_VERBOSE = 3,        /* Will report all trival errors. */
+	MSG_LEVEL_DEBUG = 4           /* Only for debug purpose. */
 } DEVICE_MSG_LEVEL, *PDEVICE_MSG_LEVEL;
 
 typedef enum __device_init_type {
-    DEVICE_INIT_COLD=0,         // cold init
-    DEVICE_INIT_RESET,          // reset init or Dx to D0 power remain init
-    DEVICE_INIT_DXPL            // Dx to D0 power lost init
+	DEVICE_INIT_COLD = 0,       /* cold init */
+	DEVICE_INIT_RESET,          /* reset init or Dx to D0 power remain */
+	DEVICE_INIT_DXPL            /* Dx to D0 power lost init */
 } DEVICE_INIT_TYPE, *PDEVICE_INIT_TYPE;
 
-
 //USB
 
 //
@@ -203,9 +193,6 @@ typedef enum _CONTEXT_TYPE {
     CONTEXT_MGMT_PACKET
 } CONTEXT_TYPE;
 
-
-
-
 // RCB (Receive Control Block)
 typedef struct _RCB
 {
@@ -219,7 +206,6 @@ typedef struct _RCB
 
 } RCB, *PRCB;
 
-
 // used to track bulk out irps
 typedef struct _USB_SEND_CONTEXT {
     void *pDevice;
@@ -233,7 +219,6 @@ typedef struct _USB_SEND_CONTEXT {
     unsigned char           Data[MAX_TOTAL_SIZE_WITH_ALL_HEADERS];
 } USB_SEND_CONTEXT, *PUSB_SEND_CONTEXT;
 
-
 /* structure got from configuration file as user-desired default settings */
 typedef struct _DEFAULT_CONFIG {
 	signed int    ZoneType;
@@ -254,12 +239,10 @@ typedef struct {
     BOOL            bInUse;
 } INT_BUFFER, *PINT_BUFFER;
 
-
-
 //0:11A 1:11B 2:11G
 typedef enum _VIA_BB_TYPE
 {
-    BB_TYPE_11A=0,
+    BB_TYPE_11A = 0,
     BB_TYPE_11B,
     BB_TYPE_11G
 } VIA_BB_TYPE, *PVIA_BB_TYPE;
@@ -267,22 +250,18 @@ typedef enum _VIA_BB_TYPE
 //0:11a,1:11b,2:11gb(only CCK in BasicRate),3:11ga(OFDM in Basic Rate)
 typedef enum _VIA_PKT_TYPE
 {
-    PK_TYPE_11A=0,
+    PK_TYPE_11A = 0,
     PK_TYPE_11B,
     PK_TYPE_11GB,
     PK_TYPE_11GA
 } VIA_PKT_TYPE, *PVIA_PKT_TYPE;
 
-
-
-
 //++ NDIS related
 
 #define NDIS_STATUS     int
-#define NTSTATUS        int
 
 typedef enum __DEVICE_NDIS_STATUS {
-    STATUS_SUCCESS=0,
+    STATUS_SUCCESS = 0,
     STATUS_FAILURE,
     STATUS_RESOURCES,
     STATUS_PENDING,
@@ -810,17 +789,12 @@ typedef struct __device_info {
     // command timer
     struct timer_list       sTimerCommand;
 
-//2007-0115-01<Add>by MikeLiu
-#ifdef TxInSleep
      struct timer_list       sTimerTxData;
      unsigned long                       nTxDataTimeCout;
      BOOL  fTxDataInSleep;
      BOOL  IsTxDataTrigger;
-#endif
 
-#ifdef WPA_SM_Transtatus
     BOOL  fWPA_Authened;           //is WPA/WPA-PSK or WPA2/WPA2-PSK authen??
-#endif
     BYTE            byReAssocCount;   //mike add:re-association retry times!
     BYTE            byLinkWaitCount;
 
diff --git a/drivers/staging/vt6656/device_cfg.h b/drivers/staging/vt6656/device_cfg.h
index c816901882a..a0b82169dad 100644
--- a/drivers/staging/vt6656/device_cfg.h
+++ b/drivers/staging/vt6656/device_cfg.h
@@ -77,25 +77,20 @@ struct _version {
 //Max: 2378=2312Payload + 30HD +4CRC + 2Padding + 4Len + 8TSF + 4RSR
 #define PKT_BUF_SZ          2390
 
-
 #define MAX_UINTS           8
 #define OPTION_DEFAULT      { [0 ... MAX_UINTS-1] = -1}
 
-
-
-typedef enum  _chip_type{
-    VT3184=1
+typedef enum  _chip_type {
+    VT3184 = 1
 } CHIP_TYPE, *PCHIP_TYPE;
 
-
-
 #ifdef VIAWET_DEBUG
 #define ASSERT(x) { \
     if (!(x)) { \
-        printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x,\
+	printk(KERN_ERR "assertion %s failed: file %s line %d\n", #x, \
         __FUNCTION__, __LINE__);\
-        *(int*) 0=0;\
-    }\
+	*(int *) 0 = 0;		\
+    } \
 }
 #define DBG_PORT80(value)                   outb(value, 0x80)
 #else
@@ -103,5 +98,4 @@ typedef enum  _chip_type{
 #define DBG_PORT80(value)
 #endif
 
-
 #endif
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index 9afe76cacef..5e88349d3b9 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -80,7 +80,7 @@ static
 void
 s_vGetDASA(
       PBYTE pbyRxBufferAddr,
-     PUINT pcbHeaderSize,
+     unsigned int *pcbHeaderSize,
      PSEthernetHeader psEthHeader
     );
 
@@ -92,7 +92,7 @@ s_vProcessRxMACHeader (
       unsigned int cbPacketSize,
       BOOL bIsWEP,
       BOOL bExtIV,
-     PUINT pcbHeadSize
+     unsigned int *pcbHeadSize
     );
 
 static BOOL s_bAPModeRxCtl(
@@ -167,7 +167,7 @@ s_vProcessRxMACHeader (
       unsigned int cbPacketSize,
       BOOL bIsWEP,
       BOOL bExtIV,
-     PUINT pcbHeadSize
+     unsigned int *pcbHeadSize
     )
 {
     PBYTE           pbyRxBuffer;
@@ -195,10 +195,9 @@ s_vProcessRxMACHeader (
     };
 
     pbyRxBuffer = (PBYTE) (pbyRxBufferAddr + cbHeaderSize);
-    if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
+    if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_Bridgetunnel[0])) {
         cbHeaderSize += 6;
-    }
-    else if (IS_ETH_ADDRESS_EQUAL(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
+    } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
         cbHeaderSize += 6;
         pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
         if ((*pwType!= TYPE_PKT_IPX) && (*pwType != cpu_to_le16(0xF380))) {
@@ -262,7 +261,7 @@ static
 void
 s_vGetDASA (
       PBYTE pbyRxBufferAddr,
-     PUINT pcbHeaderSize,
+     unsigned int *pcbHeaderSize,
      PSEthernetHeader psEthHeader
     )
 {
@@ -343,9 +342,7 @@ RXbBulkInProcessData (
     PBYTE           pbyRxSts;
     PBYTE           pbyRxRate;
     PBYTE           pbySQ;
-#ifdef Calcu_LinkQual
     PBYTE           pby3SQ;
-#endif
     unsigned int            cbHeaderSize;
     PSKeyItem       pKey = NULL;
     WORD            wRxTSC15_0 = 0;
@@ -416,7 +413,6 @@ RXbBulkInProcessData (
     wPLCPwithPadding = ( (*pwPLCP_Length / 4) + ( (*pwPLCP_Length % 4) ? 1:0 ) ) *4;
 
     pqwTSFTime = (PQWORD) (pbyDAddress + 8 + wPLCPwithPadding);
-#ifdef Calcu_LinkQual
   if(pDevice->byBBType == BB_TYPE_11G)  {
       pby3SQ = pbyDAddress + 8 + wPLCPwithPadding + 12;
       pbySQ = pby3SQ;
@@ -425,9 +421,6 @@ RXbBulkInProcessData (
    pbySQ = pbyDAddress + 8 + wPLCPwithPadding + 8;
    pby3SQ = pbySQ;
   }
-#else
-    pbySQ = pbyDAddress + 8 + wPLCPwithPadding + 8;
-#endif
     pbyNewRsr = pbyDAddress + 8 + wPLCPwithPadding + 9;
     pbyRSSI = pbyDAddress + 8 + wPLCPwithPadding + 10;
     pbyRsr = pbyDAddress + 8 + wPLCPwithPadding + 11;
@@ -453,21 +446,22 @@ RXbBulkInProcessData (
     if ((pMgmt->eCurrMode == WMAC_MODE_STANDBY) ||
         (pMgmt->eCurrMode == WMAC_MODE_ESS_STA)) {
        if (pMgmt->sNodeDBTable[0].bActive) {
-         if(IS_ETH_ADDRESS_EQUAL (pMgmt->abyCurrBSSID, pMACHeader->abyAddr2) ) {
+	 if (!compare_ether_addr(pMgmt->abyCurrBSSID, pMACHeader->abyAddr2)) {
 	    if (pMgmt->sNodeDBTable[0].uInActiveCount != 0)
                   pMgmt->sNodeDBTable[0].uInActiveCount = 0;
            }
        }
     }
 
-    if (!IS_MULTICAST_ADDRESS(pMACHeader->abyAddr1) && !IS_BROADCAST_ADDRESS(pMACHeader->abyAddr1)) {
+    if (!is_multicast_ether_addr(pMACHeader->abyAddr1) && !is_broadcast_ether_addr(pMACHeader->abyAddr1)) {
         if ( WCTLbIsDuplicate(&(pDevice->sDupRxCache), (PS802_11Header) pbyFrame) ) {
             pDevice->s802_11Counter.FrameDuplicateCount++;
             return FALSE;
         }
 
-        if ( !IS_ETH_ADDRESS_EQUAL (pDevice->abyCurrentNetAddr, pMACHeader->abyAddr1) ) {
-            return FALSE;
+	if (compare_ether_addr(pDevice->abyCurrentNetAddr,
+			       pMACHeader->abyAddr1)) {
+		return FALSE;
         }
     }
 
@@ -475,7 +469,8 @@ RXbBulkInProcessData (
     // Use for TKIP MIC
     s_vGetDASA(pbyFrame, &cbHeaderSize, &pDevice->sRxEthHeader);
 
-    if (IS_ETH_ADDRESS_EQUAL((PBYTE)&(pDevice->sRxEthHeader.abySrcAddr[0]), pDevice->abyCurrentNetAddr))
+    if (!compare_ether_addr((PBYTE)&(pDevice->sRxEthHeader.abySrcAddr[0]),
+			    pDevice->abyCurrentNetAddr))
         return FALSE;
 
     if ((pMgmt->eCurrMode == WMAC_MODE_ESS_AP) || (pMgmt->eCurrMode == WMAC_MODE_IBSS_STA)) {
@@ -568,8 +563,8 @@ RXbBulkInProcessData (
     //
     // RX OK
     //
-    //remove the CRC length
-    FrameSize -= U_CRC_LEN;
+    /* remove the FCS/CRC length */
+    FrameSize -= ETH_FCS_LEN;
 
     if ( !(*pbyRsr & (RSR_ADDRBROAD | RSR_ADDRMULTI)) && // unicast address
         (IS_FRAGMENT_PKT((pbyFrame)))
@@ -758,10 +753,11 @@ RXbBulkInProcessData (
         pMgmt->pCurrBSS->byRSSIStatCnt++;
         pMgmt->pCurrBSS->byRSSIStatCnt %= RSSI_STAT_COUNT;
         pMgmt->pCurrBSS->ldBmAverage[pMgmt->pCurrBSS->byRSSIStatCnt] = ldBm;
-        for(ii=0;ii<RSSI_STAT_COUNT;ii++) {
-            if (pMgmt->pCurrBSS->ldBmAverage[ii] != 0) {
-            pMgmt->pCurrBSS->ldBmMAX = max(pMgmt->pCurrBSS->ldBmAverage[ii], ldBm);
-            }
+	for (ii = 0; ii < RSSI_STAT_COUNT; ii++) {
+		if (pMgmt->pCurrBSS->ldBmAverage[ii] != 0) {
+			pMgmt->pCurrBSS->ldBmMAX =
+				max(pMgmt->pCurrBSS->ldBmAverage[ii], ldBm);
+		}
         }
     }
 */
@@ -1448,7 +1444,7 @@ static BOOL s_bAPModeRxData (
     if (FrameSize > CB_MAX_BUF_SIZE)
         return FALSE;
     // check DA
-    if(IS_MULTICAST_ADDRESS((PBYTE)(skb->data+cbHeaderOffset))) {
+    if (is_multicast_ether_addr((PBYTE)(skb->data+cbHeaderOffset))) {
        if (pMgmt->sNodeDBTable[0].bPSEnable) {
 
            skbcpy = dev_alloc_skb((int)pDevice->rx_buf_sz);
@@ -1523,7 +1519,7 @@ static BOOL s_bAPModeRxData (
 void RXvWorkItem(void *Context)
 {
     PSDevice pDevice = (PSDevice) Context;
-    NTSTATUS        ntStatus;
+    int ntStatus;
     PRCB            pRCB=NULL;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Rx Polling Thread\n");
diff --git a/drivers/staging/vt6656/firmware.c b/drivers/staging/vt6656/firmware.c
index e1f96d7086f..ebb9c99df70 100644
--- a/drivers/staging/vt6656/firmware.c
+++ b/drivers/staging/vt6656/firmware.c
@@ -848,7 +848,7 @@ FIRMWAREbCheckVersion(
      PSDevice pDevice
     )
 {
-    NTSTATUS                ntStatus;
+	int ntStatus;
 
     ntStatus = CONTROLnsRequestIn(pDevice,
                                     MESSAGE_TYPE_READ,
diff --git a/drivers/staging/vt6656/int.c b/drivers/staging/vt6656/int.c
index 89f5b18bdf1..c95833ac58e 100644
--- a/drivers/staging/vt6656/int.c
+++ b/drivers/staging/vt6656/int.c
@@ -82,7 +82,7 @@ static int msglevel = MSG_LEVEL_INFO;
 void INTvWorkItem(void *Context)
 {
 	PSDevice pDevice = (PSDevice) Context;
-	NTSTATUS ntStatus;
+	int ntStatus;
 
 	DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->Interrupt Polling Thread\n");
 
@@ -92,10 +92,9 @@ void INTvWorkItem(void *Context)
 	spin_unlock_irq(&pDevice->lock);
 }
 
-NTSTATUS
-INTnsProcessData(PSDevice pDevice)
+int INTnsProcessData(PSDevice pDevice)
 {
-	NTSTATUS	status = STATUS_SUCCESS;
+	int status = STATUS_SUCCESS;
 	PSINTData	pINTData;
 	PSMgmtObject	pMgmt = &(pDevice->sMgmtObj);
 	struct net_device_stats *pStats = &pDevice->stats;
diff --git a/drivers/staging/vt6656/int.h b/drivers/staging/vt6656/int.h
index cdf355130de..3176c8d08d6 100644
--- a/drivers/staging/vt6656/int.h
+++ b/drivers/staging/vt6656/int.h
@@ -57,7 +57,7 @@ typedef struct tagSINTData {
     BYTE    byACKFail;
     BYTE    byFCSErr;
     BYTE    abySW[2];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SINTData, *PSINTData;
 
 
@@ -68,10 +68,6 @@ SINTData, *PSINTData;
 /*---------------------  Export Functions  --------------------------*/
 
 void INTvWorkItem(void *Context);
-
-NTSTATUS
-INTnsProcessData(
-      PSDevice pDevice
-    );
+int INTnsProcessData(PSDevice pDevice);
 
 #endif /* __INT_H__ */
diff --git a/drivers/staging/vt6656/iocmd.h b/drivers/staging/vt6656/iocmd.h
index fbba1d53e49..1ce39a4ba2f 100644
--- a/drivers/staging/vt6656/iocmd.h
+++ b/drivers/staging/vt6656/iocmd.h
@@ -70,10 +70,10 @@ typedef enum tagWMAC_CMD {
 } WMAC_CMD, *PWMAC_CMD;
 
 typedef enum tagWZONETYPE {
-  ZoneType_USA=0,
-  ZoneType_Japan=1,
-  ZoneType_Europe=2
-}WZONETYPE;
+  ZoneType_USA = 0,
+  ZoneType_Japan = 1,
+  ZoneType_Europe = 2
+} WZONETYPE;
 
 #define ADHOC	0
 #define INFRA	1
@@ -83,9 +83,9 @@ typedef enum tagWZONETYPE {
 #define ADHOC_STARTED	   1
 #define ADHOC_JOINTED	   2
 
-#define PHY80211a 	    0
-#define PHY80211b       1
-#define PHY80211g       2
+#define PHY80211a 0
+#define PHY80211b 1
+#define PHY80211g 2
 
 #define SSID_ID                0
 #define SSID_MAXLEN            32
@@ -143,7 +143,6 @@ typedef struct tagSCmdZoneTypeSet {
 
 } SCmdZoneTypeSet, *PSCmdZoneTypeSet;
 
-#ifdef WPA_SM_Transtatus
 typedef struct tagSWPAResult {
          char	ifname[100];
 	u8 proto;
@@ -151,7 +150,6 @@ typedef struct tagSWPAResult {
 	u8 eap_type;
          BOOL authenticated;
 } SWPAResult, *PSWPAResult;
-#endif
 
 typedef struct tagSCmdStartAP {
 
diff --git a/drivers/staging/vt6656/ioctl.c b/drivers/staging/vt6656/ioctl.c
index 19a84b66b09..d532618639b 100644
--- a/drivers/staging/vt6656/ioctl.c
+++ b/drivers/staging/vt6656/ioctl.c
@@ -48,9 +48,7 @@
 //static int          msglevel                =MSG_LEVEL_DEBUG;
 static int          msglevel                =MSG_LEVEL_INFO;
 
-#ifdef WPA_SM_Transtatus
     SWPAResult wpa_Result;
-#endif
 
 /*---------------------  Static Functions  --------------------------*/
 
@@ -232,10 +230,10 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
             pDevice->bEncryptionEnable = FALSE;
             pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
             spin_lock_irq(&pDevice->lock);
-            for(uu=0;uu<MAX_KEY_TABLE;uu++)
-                MACvDisableKeyEntry(pDevice,uu);
+	    for (uu = 0; uu < MAX_KEY_TABLE; uu++)
+		MACvDisableKeyEntry(pDevice, uu);
             spin_unlock_irq(&pDevice->lock);
-            DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WEP function disable. \n");
+	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "WEP function disable.\n");
             break;
         }
 
@@ -656,7 +654,6 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
         pReq->wResult = 0;
         break;
 
-#ifdef WPA_SM_Transtatus
     case 0xFF:
         memset(wpa_Result.ifname,0,sizeof(wpa_Result.ifname));
 	    wpa_Result.proto = 0;
@@ -676,7 +673,6 @@ int private_ioctl(PSDevice pDevice, struct ifreq *rq) {
 //DavidWang
 
 if(wpa_Result.authenticated==TRUE) {
-   #ifdef SndEvt_ToAPI
    {
      union iwreq_data      wrqu;
 
@@ -687,7 +683,6 @@ if(wpa_Result.authenticated==TRUE) {
      wrqu.data.length =pItemSSID->len;
      wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID);
    }
-   #endif
          pDevice->fWPA_Authened = TRUE;           //is successful peer to wpa_Result.authenticated?
 }
 
@@ -700,7 +695,6 @@ if(wpa_Result.authenticated==TRUE) {
 
 	pReq->wResult = 0;
         break;
-#endif
 
     default:
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Private command not support..\n");
diff --git a/drivers/staging/vt6656/iowpa.h b/drivers/staging/vt6656/iowpa.h
index da03edcbacb..959c8868f6e 100644
--- a/drivers/staging/vt6656/iowpa.h
+++ b/drivers/staging/vt6656/iowpa.h
@@ -31,10 +31,8 @@
 
 /*---------------------  Export Definitions -------------------------*/
 
-
 #define WPA_IE_LEN 64
 
-
 //WPA related
 /*
 typedef enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg;
@@ -54,7 +52,7 @@ enum {
 	VIAWGET_SET_DROP_UNENCRYPT = 7,
 	VIAWGET_SET_DEAUTHENTICATE = 8,
 	VIAWGET_SET_ASSOCIATE = 9,
-	VIAWGET_SET_DISASSOCIATE= 10
+	VIAWGET_SET_DISASSOCIATE = 10
 };
 
 
@@ -76,8 +74,6 @@ typedef struct viawget_wpa_header {
 	u16 resp_ie_len;
 } viawget_wpa_header;
 
-
-
 struct viawget_wpa_param {
 	u32 cmd;
 	u8 addr[6];
@@ -86,43 +82,37 @@ struct viawget_wpa_param {
 			u8 len;
 			u8 data[0];
 		} generic_elem;
-
 		struct {
-        	u8 bssid[6];
+			u8 bssid[6];
 			u8 ssid[32];
 			u8 ssid_len;
-        	u8 *wpa_ie;
-        	u16 wpa_ie_len;
-        	int pairwise_suite;
-        	int group_suite;
-        	int key_mgmt_suite;
-        	int auth_alg;
-        	int mode;
-                u8 roam_dbm;  //DavidWang
+			u8 *wpa_ie;
+			u16 wpa_ie_len;
+			int pairwise_suite;
+			int group_suite;
+			int key_mgmt_suite;
+			int auth_alg;
+			int mode;
+			u8 roam_dbm;
 		} wpa_associate;
-
 		struct {
-	        int alg_name;
-	        u16 key_index;
-	        u16 set_tx;
-	        u8 *seq;
-	        u16 seq_len;
-	        u8 *key;
-	        u16 key_len;
+			int alg_name;
+			u16 key_index;
+			u16 set_tx;
+			u8 *seq;
+			u16 seq_len;
+			u8 *key;
+			u16 key_len;
 		} wpa_key;
-
 		struct {
 			u8 ssid_len;
 			u8 ssid[32];
 		} scan_req;
-
 		struct {
 			u16 scan_count;
 			u8 *buf;
 		} scan_results;
-
 	} u;
-
 };
 
 #pragma pack(1)
@@ -142,15 +132,12 @@ struct viawget_scan_result {
 	int maxrate;
 };
 
-
 /*---------------------  Export Classes  ----------------------------*/
 
 /*---------------------  Export Variables  --------------------------*/
 
-
 /*---------------------  Export Types  ------------------------------*/
 
-
 /*---------------------  Export Functions  --------------------------*/
 
 #endif /* __IOWPA_H__ */
diff --git a/drivers/staging/vt6656/iwctl.c b/drivers/staging/vt6656/iwctl.c
index fa40522d4a9..016b8e7766f 100644
--- a/drivers/staging/vt6656/iwctl.c
+++ b/drivers/staging/vt6656/iwctl.c
@@ -83,31 +83,9 @@ struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev)
 	long ldBm;
 
 	pDevice->wstats.status = pDevice->eOPMode;
-	#ifdef Calcu_LinkQual
-	 #if 0
-	  if(pDevice->byBBType == BB_TYPE_11B) {
-	     if(pDevice->byCurrSQ > 120)
-                  pDevice->scStatistic.LinkQuality = 100;
-	     else
-		 pDevice->scStatistic.LinkQuality = pDevice->byCurrSQ*100/120;
-	    }
-	  else if(pDevice->byBBType == BB_TYPE_11G) {
-                if(pDevice->byCurrSQ < 20)
-		   pDevice->scStatistic.LinkQuality = 100;
-	       else if(pDevice->byCurrSQ >96)
-		   pDevice->scStatistic.LinkQuality  = 0;
-	       else
-		   pDevice->scStatistic.LinkQuality = (96-pDevice->byCurrSQ)*100/76;
-	   }
-	   if(pDevice->bLinkPass !=TRUE)
-	       pDevice->scStatistic.LinkQuality = 0;
-	  #endif
 	   if(pDevice->scStatistic.LinkQuality > 100)
    	       pDevice->scStatistic.LinkQuality = 100;
                pDevice->wstats.qual.qual =(BYTE) pDevice->scStatistic.LinkQuality;
-	#else
-	pDevice->wstats.qual.qual = pDevice->byCurrSQ;
-	#endif
 	RFvRSSITodBm(pDevice, (BYTE)(pDevice->uCurrRSSI), &ldBm);
 	pDevice->wstats.qual.level = ldBm;
 	//pDevice->wstats.qual.level = 0x100 - pDevice->uCurrRSSI;
@@ -133,18 +111,9 @@ static int iwctl_commit(struct net_device *dev,
 			      void *wrq,
 			      char *extra)
 {
-//2008-0409-02, <Mark> by Einsn Liu
-/*
-#ifdef Safe_Close
-  PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
-  if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
-        return -EINVAL;
-#endif
-*/
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWCOMMIT \n");
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCSIWCOMMIT\n");
 
 	return 0;
-
 }
 
 /*
@@ -209,9 +178,7 @@ if(pDevice->byReAssocCount > 0) {   //reject scan when re-associating!
 
 	spin_lock_irq(&pDevice->lock);
 
-#ifdef update_BssList
 	BSSvClearBSSList((void *) pDevice, pDevice->bLinkPass);
-#endif
 
 //mike add: active scan OR passive scan OR desire_ssid scan
  if(wrq->length == sizeof(struct iw_scan_req)) {
@@ -273,14 +240,7 @@ int iwctl_giwscan(struct net_device *dev,
 	long ldBm;
 	char buf[MAX_WPA_IE_LEN * 2 + 30];
 
-//2008-0409-02, <Mark> by Einsn Liu
-/*
-#ifdef Safe_Close
-  if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
-        return -EINVAL;
-#endif
-*/
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSCAN \n");
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWSCAN\n");
 
     if (pMgmt->eScanState ==  WMAC_IS_SCANNING) {
         // In scanning..
@@ -349,39 +309,6 @@ int iwctl_giwscan(struct net_device *dev,
 			}
 			iwe.u.qual.updated=7;
 
-//2008-0409-01, <Mark> by Einsn Liu
-/*
-//2008-0220-03, <Modify>  by Einsn Liu
-	if(pDevice->bLinkPass== TRUE && IS_ETH_ADDRESS_EQUAL(pBSS->abyBSSID, pMgmt->abyCurrBSSID)){
-	#ifdef Calcu_LinkQual
-	 #if 0
-	  if(pDevice->byBBType == BB_TYPE_11B) {
-	     if(pDevice->byCurrSQ > 120)
-                  pDevice->scStatistic.LinkQuality = 100;
-	     else
-		 pDevice->scStatistic.LinkQuality = pDevice->byCurrSQ*100/120;
-	    }
-	  else if(pDevice->byBBType == BB_TYPE_11G) {
-                if(pDevice->byCurrSQ < 20)
-		   pDevice->scStatistic.LinkQuality = 100;
-	       else if(pDevice->byCurrSQ >96)
-		   pDevice->scStatistic.LinkQuality  = 0;
-	       else
-		   pDevice->scStatistic.LinkQuality = (96-pDevice->byCurrSQ)*100/76;
-	   }
-	   if(pDevice->bLinkPass !=TRUE)
-	       pDevice->scStatistic.LinkQuality = 0;
-	  #endif
-	   if(pDevice->scStatistic.LinkQuality > 100)
-   	       pDevice->scStatistic.LinkQuality = 100;
-              iwe.u.qual.qual =(BYTE) pDevice->scStatistic.LinkQuality;
-	#else
-	iwe.u.qual.qual = pDevice->byCurrSQ;
-	#endif
-		}else {
-	        iwe.u.qual.qual = 0;
-		}
-*/
                  current_ev = iwe_stream_add_event(info,current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
        	//ADD encryption
             memset(&iwe, 0, sizeof(iwe));
@@ -634,16 +561,8 @@ int iwctl_giwrange(struct net_device *dev,
 	struct iw_range *range = (struct iw_range *) extra;
 	int		i,k;
     BYTE abySupportedRates[13]= {0x02, 0x04, 0x0B, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90};
-//2008-0409-02, <Mark> by Einsn Liu
-/*
- #ifdef Safe_Close
-  PSDevice	        pDevice = (PSDevice)netdev_priv(dev);
-  if (!(pDevice->flags & DEVICE_FLAGS_OPENED))
-        return -EINVAL;
-#endif
- */
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRANGE \n");
+    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " SIOCGIWRANGE\n");
 	if (wrq->pointer) {
 		wrq->length = sizeof(struct iw_range);
 		memset(range, 0, sizeof(struct iw_range));
@@ -653,23 +572,19 @@ int iwctl_giwrange(struct net_device *dev,
 		// Should be based on cap_rid.country to give only
 		//  what the current card support
 		k = 0;
-		for(i = 0; i < 14; i++) {
+		for (i = 0; i < 14; i++) {
 			range->freq[k].i = i + 1; // List index
 			range->freq[k].m = frequency_list[i] * 100000;
 			range->freq[k++].e = 1;	// Values in table in MHz -> * 10^5 * 10
 		}
 		range->num_frequency = k;
 		// Hum... Should put the right values there
-	     #ifdef Calcu_LinkQual
                  range->max_qual.qual = 100;
-	     #else
-		range->max_qual.qual = 255;
-	     #endif
 		range->max_qual.level = 0;
 		range->max_qual.noise = 0;
 		range->sensitivity = 255;
 
-		for(i = 0 ; i < 13 ; i++) {
+		for (i = 0 ; i < 13 ; i++) {
 			range->bitrate[i] = abySupportedRates[i] * 500000;
 			if(range->bitrate[i] == 0)
 				break;
@@ -761,7 +676,7 @@ int iwctl_siwap(struct net_device *dev,
 		memcpy(pMgmt->abyDesireBSSID, wrq->sa_data, 6);
 
 	//mike :add
-	 if ((IS_BROADCAST_ADDRESS(pMgmt->abyDesireBSSID)) ||
+	 if ((is_broadcast_ether_addr(pMgmt->abyDesireBSSID)) ||
 	     (memcmp(pMgmt->abyDesireBSSID, ZeroBSSID, 6) == 0)){
 	      PRINT_K("SIOCSIWAP:invalid desired BSSID return!\n");
                return rc;
@@ -772,7 +687,8 @@ int iwctl_siwap(struct net_device *dev,
 		unsigned int ii, uSameBssidNum = 0;
                   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
                      if (pMgmt->sBSSList[ii].bActive &&
-                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID,pMgmt->abyDesireBSSID)) {
+			 !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
+					     pMgmt->abyDesireBSSID)) {
                         uSameBssidNum++;
                      }
                   }
@@ -957,7 +873,8 @@ int iwctl_siwessid(struct net_device *dev,
                      //         by means of judging if there are two same BSSID exist in list ?
                   for (ii = 0; ii < MAX_BSS_NUM; ii++) {
                      if (pMgmt->sBSSList[ii].bActive &&
-                        IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
+			 !compare_ether_addr(pMgmt->sBSSList[ii].abyBSSID,
+					     pCurr->abyBSSID)) {
                         uSameBssidNum++;
                      }
                   }
@@ -1057,7 +974,7 @@ int iwctl_siwrate(struct net_device *dev,
 		u8	normvalue = (u8) (wrq->value/500000);
 
 		// Check if rate is valid
-		for(i = 0 ; i < 13 ; i++) {
+		for (i = 0 ; i < 13 ; i++) {
 			if(normvalue == abySupportedRates[i]) {
 				brate = i;
 				break;
@@ -1067,7 +984,7 @@ int iwctl_siwrate(struct net_device *dev,
 	// -1 designed the max rate (mostly auto mode)
 	if(wrq->value == -1) {
 		// Get the highest available rate
-		for(i = 0 ; i < 13 ; i++) {
+		for (i = 0 ; i < 13 ; i++) {
 			if(abySupportedRates[i] == 0)
 				break;
 		}
@@ -1405,8 +1322,8 @@ int iwctl_siwencode(struct net_device *dev,
         pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
         if (pDevice->flags & DEVICE_FLAGS_OPENED) {
             spin_lock_irq(&pDevice->lock);
-            for(uu=0;uu<MAX_KEY_TABLE;uu++)
-                MACvDisableKeyEntry(pDevice,uu);
+	    for (uu = 0; uu < MAX_KEY_TABLE; uu++)
+		MACvDisableKeyEntry(pDevice, uu);
             spin_unlock_irq(&pDevice->lock);
         }
 	}
@@ -1926,26 +1843,6 @@ param->u.wpa_key.key = (u8 *)key_array;
 param->u.wpa_key.seq = (u8 *)seq;
 param->u.wpa_key.seq_len = seq_len;
 
-#if 0
-printk("param->u.wpa_key.alg_name =%d\n",param->u.wpa_key.alg_name);
-printk("param->addr=%02x:%02x:%02x:%02x:%02x:%02x\n",
-	      param->addr[0],param->addr[1],param->addr[2],
-	      param->addr[3],param->addr[4],param->addr[5]);
-printk("param->u.wpa_key.set_tx =%d\n",param->u.wpa_key.set_tx);
-printk("param->u.wpa_key.key_index =%d\n",param->u.wpa_key.key_index);
-printk("param->u.wpa_key.key_len =%d\n",param->u.wpa_key.key_len);
-printk("param->u.wpa_key.key =");
-for(ii=0;ii<param->u.wpa_key.key_len;ii++)
-	printk("%02x:",param->u.wpa_key.key[ii]);
-         printk("\n");
-printk("param->u.wpa_key.seq_len =%d\n",param->u.wpa_key.seq_len);
-printk("param->u.wpa_key.seq =");
-for(ii=0;ii<param->u.wpa_key.seq_len;ii++)
-	printk("%02x:",param->u.wpa_key.seq[ii]);
-         printk("\n");
-
-printk("...........\n");
-#endif
 //****set if current action is Network Manager count??
 //****this method is so foolish,but there is no other way???
 if(param->u.wpa_key.alg_name == WPA_ALG_NONE) {
diff --git a/drivers/staging/vt6656/iwctl.h b/drivers/staging/vt6656/iwctl.h
index df9a4cf3baa..d601e922021 100644
--- a/drivers/staging/vt6656/iwctl.h
+++ b/drivers/staging/vt6656/iwctl.h
@@ -33,15 +33,13 @@
 
 /*---------------------  Export Definitions -------------------------*/
 
-
 /*---------------------  Export Classes  ----------------------------*/
 
 /*---------------------  Export Variables  --------------------------*/
 
 /*---------------------  Export Functions  --------------------------*/
 
-struct iw_statistics *iwctl_get_wireless_stats (struct net_device *dev);
-
+struct iw_statistics *iwctl_get_wireless_stats(struct net_device *dev);
 
 int iwctl_siwap(struct net_device *dev,
              struct iw_request_info *info,
diff --git a/drivers/staging/vt6656/key.c b/drivers/staging/vt6656/key.c
index b0890c181e7..d181a2f6626 100644
--- a/drivers/staging/vt6656/key.c
+++ b/drivers/staging/vt6656/key.c
@@ -174,7 +174,7 @@ BOOL KeybGetKey(PSKeyManagement pTable, PBYTE pbyBSSID, DWORD dwKeyIndex,
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
         if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             if (dwKeyIndex == 0xFFFFFFFF) {
                 if (pTable->KeyTable[i].PairwiseKey.bKeyValid == TRUE) {
                     *pKey = &(pTable->KeyTable[i].PairwiseKey);
@@ -245,7 +245,7 @@ BOOL KeybSetKey(
             j = i;
         }
         if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             // found table already exist
             if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
                 // Pairwise key
@@ -402,7 +402,7 @@ BOOL KeybRemoveKey(
     int     i;
     BOOL    bReturnValue = FALSE;
 
-    if (IS_BROADCAST_ADDRESS(pbyBSSID)) {
+    if (is_broadcast_ether_addr(pbyBSSID)) {
         // dealte all key
         if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
             for (i=0;i<MAX_KEY_TABLE;i++) {
@@ -427,7 +427,7 @@ BOOL KeybRemoveKey(
     } else {
         for (i=0;i<MAX_KEY_TABLE;i++) {
             if ( (pTable->KeyTable[i].bInUse == TRUE) &&
-                 IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+		 !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 
                 if ((dwKeyIndex & PAIRWISE_KEY) != 0) {
                     pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
@@ -483,11 +483,11 @@ BOOL KeybRemoveAllKey(
 
     for (i=0;i<MAX_KEY_TABLE;i++) {
         if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
             pTable->KeyTable[i].PairwiseKey.bKeyValid = FALSE;
-            for(u=0;u<MAX_GROUP_KEY;u++) {
-                pTable->KeyTable[i].GroupKey[u].bKeyValid = FALSE;
-            }
+	    for (u = 0; u < MAX_GROUP_KEY; u++)
+		pTable->KeyTable[i].GroupKey[u].bKeyValid = FALSE;
+
             pTable->KeyTable[i].dwGTKeyIndex = 0;
             s_vCheckKeyTableValid(pDevice, pTable);
             return (TRUE);
@@ -531,19 +531,13 @@ void KeyvRemoveWEPKey(
     return;
 }
 
-void KeyvRemoveAllWEPKey(
-    void *pDeviceHandler,
-    PSKeyManagement pTable
-    )
+void KeyvRemoveAllWEPKey(void *pDeviceHandler, PSKeyManagement pTable)
 {
-    PSDevice    pDevice = (PSDevice) pDeviceHandler;
-
-    int i;
-
-    for(i=0;i<MAX_GROUP_KEY;i++) {
-        KeyvRemoveWEPKey(pDevice,pTable, i);
-    }
+	PSDevice pDevice = (PSDevice) pDeviceHandler;
+	int i;
 
+	for (i = 0; i < MAX_GROUP_KEY; i++)
+		KeyvRemoveWEPKey(pDevice, pTable, i);
 }
 
 /*
@@ -567,7 +561,7 @@ BOOL KeybGetTransmitKey(PSKeyManagement pTable, PBYTE pbyBSSID, DWORD dwKeyType,
     *pKey = NULL;
     for (i=0;i<MAX_KEY_TABLE;i++) {
         if ((pTable->KeyTable[i].bInUse == TRUE) &&
-            IS_ETH_ADDRESS_EQUAL(pTable->KeyTable[i].abyBSSID,pbyBSSID)) {
+	    !compare_ether_addr(pTable->KeyTable[i].abyBSSID, pbyBSSID)) {
 
             if (dwKeyType == PAIRWISE_KEY) {
 
diff --git a/drivers/staging/vt6656/mac.c b/drivers/staging/vt6656/mac.c
index 0ab3db025f3..33698edde4f 100644
--- a/drivers/staging/vt6656/mac.c
+++ b/drivers/staging/vt6656/mac.c
@@ -306,8 +306,8 @@ BYTE            pbyData[24];
     pbyData[5] = (BYTE)(dwData2>>8);
     pbyData[6] = (BYTE)(dwData2>>16);
     pbyData[7] = (BYTE)(dwData2>>24);
-    for(ii=8;ii<24;ii++)
-        pbyData[ii] = *pbyKey++;
+    for (ii = 8; ii < 24; ii++)
+	pbyData[ii] = *pbyKey++;
 
     CONTROLnsRequestOut(pDevice,
                         MESSAGE_TYPE_SETKEY,
diff --git a/drivers/staging/vt6656/mac.h b/drivers/staging/vt6656/mac.h
index 775c70928ec..491ff5ecd04 100644
--- a/drivers/staging/vt6656/mac.h
+++ b/drivers/staging/vt6656/mac.h
@@ -420,11 +420,11 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-void MACvSetMultiAddrByHash (PSDevice pDevice, BYTE byHashIdx);
+void MACvSetMultiAddrByHash(PSDevice pDevice, BYTE byHashIdx);
 void MACvWriteMultiAddr(PSDevice pDevice, unsigned int uByteIdx, BYTE byData);
-BOOL MACbShutdown(PSDevice pDevice);;
-void MACvSetBBType(PSDevice pDevice,BYTE byType);
-void MACvSetMISCFifo (PSDevice pDevice, WORD wOffset, DWORD dwData);
+BOOL MACbShutdown(PSDevice pDevice);
+void MACvSetBBType(PSDevice pDevice, BYTE byType);
+void MACvSetMISCFifo(PSDevice pDevice, WORD wOffset, DWORD dwData);
 void MACvDisableKeyEntry(PSDevice pDevice, unsigned int uEntryIdx);
 void MACvSetKeyEntry(PSDevice pDevice, WORD wKeyCtl, unsigned int uEntryIdx,
 		     unsigned int uKeyIdx, PBYTE pbyAddr, PDWORD pdwKey);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index 098b0455e32..c528ef0f8ed 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -366,7 +366,7 @@ static BOOL device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
     BYTE            byAntenna;
     unsigned int            ii;
     CMD_CARD_INIT   sInitCmd;
-    NTSTATUS        ntStatus = STATUS_SUCCESS;
+    int ntStatus = STATUS_SUCCESS;
     RSP_CARD_INIT   sInitRsp;
     PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
     BYTE            byTmp;
@@ -407,8 +407,8 @@ static BOOL device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
 
     sInitCmd.byInitClass = (BYTE)InitType;
     sInitCmd.bExistSWNetAddr = (BYTE) pDevice->bExistSWNetAddr;
-    for(ii=0;ii<6;ii++)
-        sInitCmd.bySWNetAddr[ii] = pDevice->abyCurrentNetAddr[ii];
+    for (ii = 0; ii < 6; ii++)
+	sInitCmd.bySWNetAddr[ii] = pDevice->abyCurrentNetAddr[ii];
     sInitCmd.byShortRetryLimit = pDevice->byShortRetryLimit;
     sInitCmd.byLongRetryLimit = pDevice->byLongRetryLimit;
 
@@ -487,10 +487,10 @@ static BOOL device_init_registers(PSDevice pDevice, DEVICE_INIT_TYPE InitType)
           if(((pDevice->abyEEPROM[EEP_OFS_ZONETYPE] == ZoneType_Japan) ||
 	        (pDevice->abyEEPROM[EEP_OFS_ZONETYPE] == ZoneType_Europe))&&
 	     (pDevice->byOriginalZonetype == ZoneType_USA)) {
-	    for(ii=11;ii<14;ii++) {
-                pDevice->abyCCKPwrTbl[ii] = pDevice->abyCCKPwrTbl[10];
-	       pDevice->abyOFDMPwrTbl[ii] = pDevice->abyOFDMPwrTbl[10];
-	    }
+		for (ii = 11; ii < 14; ii++) {
+			pDevice->abyCCKPwrTbl[ii] = pDevice->abyCCKPwrTbl[10];
+			pDevice->abyOFDMPwrTbl[ii] = pDevice->abyOFDMPwrTbl[10];
+		}
 	  }
 
         //{{ RobertYu: 20041124
@@ -718,33 +718,32 @@ static BOOL device_release_WPADEV(PSDevice pDevice)
 
 static int vt6656_suspend(struct usb_interface *intf, pm_message_t message)
 {
- PSDevice  pDevice = usb_get_intfdata(intf);
- struct net_device *dev = pDevice->dev;
+	PSDevice device = usb_get_intfdata(intf);
 
- printk("VNTWUSB Suspend Start======>\n");
-if(dev != NULL) {
-  if(pDevice->flags & DEVICE_FLAGS_OPENED)
-     device_close(dev);
-}
+	if (!device || !device->dev)
+		return -ENODEV;
 
- usb_put_dev(interface_to_usbdev(intf));
- return 0;
+	if (device->flags & DEVICE_FLAGS_OPENED)
+		device_close(device->dev);
+
+	usb_put_dev(interface_to_usbdev(intf));
+
+	return 0;
 }
 
 static int vt6656_resume(struct usb_interface *intf)
 {
- PSDevice  pDevice = usb_get_intfdata(intf);
- struct net_device *dev = pDevice->dev;
-
- printk("VNTWUSB Resume Start======>\n");
- if(dev != NULL) {
-  usb_get_dev(interface_to_usbdev(intf));
-  if(!(pDevice->flags & DEVICE_FLAGS_OPENED)) {
-    if(device_open(dev)!=0)
-        printk("VNTWUSB Resume Start======>open fail\n");
-   }
- }
- return 0;
+	PSDevice device = usb_get_intfdata(intf);
+
+	if (!device || !device->dev)
+		return -ENODEV;
+
+	usb_get_dev(interface_to_usbdev(intf));
+
+	if (!(device->flags & DEVICE_FLAGS_OPENED))
+		device_open(device->dev);
+
+	return 0;
 }
 
 #endif /* CONFIG_PM */
@@ -758,93 +757,75 @@ static const struct net_device_ops device_netdev_ops = {
     .ndo_set_multicast_list = device_set_multi,
 };
 
-
 static int __devinit
 vt6656_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	u8 fake_mac[ETH_ALEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x01};
 	struct usb_device *udev = interface_to_usbdev(intf);
-    int         rc = 0;
-    struct net_device *netdev = NULL;
-    PSDevice    pDevice = NULL;
-
+	int rc = 0;
+	struct net_device *netdev = NULL;
+	PSDevice pDevice = NULL;
 
-    printk(KERN_NOTICE "%s Ver. %s\n",DEVICE_FULL_DRV_NAM, DEVICE_VERSION);
-    printk(KERN_NOTICE "Copyright (c) 2004 VIA Networking Technologies, Inc.\n");
+	printk(KERN_NOTICE "%s Ver. %s\n", DEVICE_FULL_DRV_NAM, DEVICE_VERSION);
+	printk(KERN_NOTICE "Copyright (c) 2004 VIA Networking Technologies, Inc.\n");
 
-  udev = usb_get_dev(udev);
-
-    netdev = alloc_etherdev(sizeof(DEVICE_INFO));
-
-    if (netdev == NULL) {
-        printk(KERN_ERR DEVICE_NAME ": allocate net device failed \n");
-        kfree(pDevice);
-	    goto err_nomem;
-    }
+	udev = usb_get_dev(udev);
+	netdev = alloc_etherdev(sizeof(DEVICE_INFO));
 
-    pDevice = netdev_priv(netdev);
-    memset(pDevice, 0, sizeof(DEVICE_INFO));
+	if (!netdev) {
+		printk(KERN_ERR DEVICE_NAME ": allocate net device failed\n");
+		kfree(pDevice);
+		goto err_nomem;
+	}
 
-    pDevice->dev = netdev;
-    pDevice->usb = udev;
+	pDevice = netdev_priv(netdev);
+	memset(pDevice, 0, sizeof(DEVICE_INFO));
 
-    // Set initial settings
-    device_set_options(pDevice);
-    spin_lock_init(&pDevice->lock);
+	pDevice->dev = netdev;
+	pDevice->usb = udev;
 
-    pDevice->tx_80211 = device_dma0_tx_80211;
-    pDevice->sMgmtObj.pAdapter = (void *)pDevice;
+	device_set_options(pDevice);
+	spin_lock_init(&pDevice->lock);
 
-    netdev->netdev_ops         = &device_netdev_ops;
+	pDevice->tx_80211 = device_dma0_tx_80211;
+	pDevice->sMgmtObj.pAdapter = (void *) pDevice;
 
-	netdev->wireless_handlers = (struct iw_handler_def *)&iwctl_handler_def;
+	netdev->netdev_ops = &device_netdev_ops;
+	netdev->wireless_handlers =
+		(struct iw_handler_def *) &iwctl_handler_def;
 
-   //2008-0623-01<Remark>by MikeLiu
-  //2007-0821-01<Add>by MikeLiu
-         usb_set_intfdata(intf, pDevice);
+	usb_set_intfdata(intf, pDevice);
 	SET_NETDEV_DEV(netdev, &intf->dev);
-    memcpy(pDevice->dev->dev_addr, fake_mac, ETH_ALEN);
-    rc = register_netdev(netdev);
-    if (rc != 0) {
-        printk(KERN_ERR DEVICE_NAME " Failed to register netdev\n");
+	memcpy(pDevice->dev->dev_addr, fake_mac, ETH_ALEN);
+	rc = register_netdev(netdev);
+	if (rc) {
+		printk(KERN_ERR DEVICE_NAME " Failed to register netdev\n");
 		free_netdev(netdev);
-        kfree(pDevice);
-        return -ENODEV;
-    }
-
-//2008-07-21-01<Add>by MikeLiu
-//register wpadev
-#if 0
-   if(wpa_set_wpadev(pDevice, 1)!=0) {
-     printk("Fail to Register WPADEV?\n");
-        unregister_netdev(pDevice->dev);
-        free_netdev(netdev);
-        kfree(pDevice);
-   }
-#endif
-         usb_device_reset(pDevice);
+		kfree(pDevice);
+		return -ENODEV;
+	}
 
-#ifdef SndEvt_ToAPI
-{
-  union iwreq_data      wrqu;
-  memset(&wrqu, 0, sizeof(wrqu));
-  wrqu.data.flags = RT_INSMOD_EVENT_FLAG;
-  wrqu.data.length =IFNAMSIZ;
-  wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pDevice->dev->name);
-}
-#endif
+	usb_device_reset(pDevice);
+
+	{
+		union iwreq_data wrqu;
+		memset(&wrqu, 0, sizeof(wrqu));
+		wrqu.data.flags = RT_INSMOD_EVENT_FLAG;
+		wrqu.data.length = IFNAMSIZ;
+		wireless_send_event(pDevice->dev,
+				    IWEVCUSTOM,
+				    &wrqu,
+				    pDevice->dev->name);
+	}
 
 	return 0;
 
-
 err_nomem:
- //2008-0922-01<Add>by MikeLiu, decrease usb counter.
-    usb_put_dev(udev);
+	usb_put_dev(udev);
 
-    return -ENOMEM;
+	return -ENOMEM;
 }
 
-
 static void device_free_tx_bufs(PSDevice pDevice)
 {
     PUSB_SEND_CONTEXT pTxContext;
@@ -1065,7 +1046,6 @@ BOOL device_alloc_frag_buf(PSDevice pDevice, PSDeFragControlBlock pDeF) {
 static int  device_open(struct net_device *dev) {
     PSDevice    pDevice=(PSDevice) netdev_priv(dev);
 
-#ifdef WPA_SM_Transtatus
      extern SWPAResult wpa_Result;
      memset(wpa_Result.ifname,0,sizeof(wpa_Result.ifname));
      wpa_Result.proto = 0;
@@ -1073,7 +1053,6 @@ static int  device_open(struct net_device *dev) {
      wpa_Result.eap_type = 0;
      wpa_Result.authenticated = FALSE;
      pDevice->fWPA_Authened = FALSE;
-#endif
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO " device_open...\n");
 
@@ -1172,14 +1151,12 @@ static int  device_open(struct net_device *dev) {
     netif_stop_queue(pDevice->dev);
     pDevice->flags |= DEVICE_FLAGS_OPENED;
 
-#ifdef SndEvt_ToAPI
 {
   union iwreq_data      wrqu;
   memset(&wrqu, 0, sizeof(wrqu));
   wrqu.data.flags = RT_UPDEV_EVENT_FLAG;
   wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
 }
-#endif
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_open success.. \n");
     return 0;
@@ -1211,14 +1188,12 @@ static int  device_close(struct net_device *dev) {
     if (pDevice == NULL)
         return -ENODEV;
 
-#ifdef SndEvt_ToAPI
 {
   union iwreq_data      wrqu;
   memset(&wrqu, 0, sizeof(wrqu));
   wrqu.data.flags = RT_DOWNDEV_EVENT_FLAG;
   wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
 }
-#endif
 
 //2007-1121-02<Add>by EinsnLiu
     if (pDevice->bLinkPass) {
@@ -1234,10 +1209,10 @@ device_release_WPADEV(pDevice);
         pMgmt->bShareKeyAlgorithm = FALSE;
         pDevice->bEncryptionEnable = FALSE;
         pDevice->eEncryptionStatus = Ndis802_11EncryptionDisabled;
-            spin_lock_irq(&pDevice->lock);
-            for(uu=0;uu<MAX_KEY_TABLE;uu++)
+	spin_lock_irq(&pDevice->lock);
+	for (uu = 0; uu < MAX_KEY_TABLE; uu++)
                 MACvDisableKeyEntry(pDevice,uu);
-            spin_unlock_irq(&pDevice->lock);
+	spin_unlock_irq(&pDevice->lock);
 
     if ((pDevice->flags & DEVICE_FLAGS_UNPLUG) == FALSE) {
         MACbShutdown(pDevice);
@@ -1250,10 +1225,7 @@ device_release_WPADEV(pDevice);
     del_timer(&pDevice->sTimerCommand);
     del_timer(&pMgmt->sTimerSecondCallback);
 
-//2007-0115-02<Add>by MikeLiu
-#ifdef TxInSleep
     del_timer(&pDevice->sTimerTxData);
-#endif
 
     if (pDevice->bDiversityRegCtlON) {
         del_timer(&pDevice->TimerSQ3Tmax1);
@@ -1290,112 +1262,81 @@ device_release_WPADEV(pDevice);
     return 0;
 }
 
-
 static void __devexit vt6656_disconnect(struct usb_interface *intf)
 {
+	PSDevice device = usb_get_intfdata(intf);
 
-	PSDevice  pDevice = usb_get_intfdata(intf);
+	if (!device)
+		return;
 
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect1.. \n");
-    if (pDevice == NULL)
-        return;
-
-#ifdef SndEvt_ToAPI
-{
-  union iwreq_data      wrqu;
-  memset(&wrqu, 0, sizeof(wrqu));
-  wrqu.data.flags = RT_RMMOD_EVENT_FLAG;
-  wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, NULL);
-}
-#endif
+	{
+		union iwreq_data req;
+		memset(&req, 0, sizeof(req));
+		req.data.flags = RT_RMMOD_EVENT_FLAG;
+		wireless_send_event(device->dev, IWEVCUSTOM, &req, NULL);
+	}
 
-//2008-0714-01<Add>by MikeLiu
-device_release_WPADEV(pDevice);
+	device_release_WPADEV(device);
 
 	usb_set_intfdata(intf, NULL);
-//2008-0922-01<Add>by MikeLiu, decrease usb counter.
-     usb_put_dev(interface_to_usbdev(intf));
+	usb_put_dev(interface_to_usbdev(intf));
 
-    pDevice->flags |= DEVICE_FLAGS_UNPLUG;
-    if (pDevice->dev != NULL) {
-        DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "unregister_netdev..\n");
-        unregister_netdev(pDevice->dev);
+	device->flags |= DEVICE_FLAGS_UNPLUG;
 
-//2008-07-21-01<Add>by MikeLiu
-//unregister wpadev
-   if(wpa_set_wpadev(pDevice, 0)!=0)
-     printk("unregister wpadev fail?\n");
-
-        free_netdev(pDevice->dev);
-    }
-
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect3.. \n");
+	if (device->dev) {
+		unregister_netdev(device->dev);
+		wpa_set_wpadev(device, 0);
+		free_netdev(device->dev);
+	}
 }
 
+static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev)
+{
+	PSDevice pDevice = netdev_priv(dev);
 
+	spin_lock_irq(&pDevice->lock);
 
+	if (unlikely(pDevice->bStopTx0Pkt))
+		dev_kfree_skb_irq(skb);
+	else
+		vDMA0_tx_80211(pDevice, skb);
 
-static int device_dma0_tx_80211(struct sk_buff *skb, struct net_device *dev) {
-    PSDevice        pDevice=netdev_priv(dev);
-    PBYTE           pbMPDU;
-    unsigned int            cbMPDULen = 0;
-
-
-    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_dma0_tx_80211\n");
-    spin_lock_irq(&pDevice->lock);
-
-    if (pDevice->bStopTx0Pkt == TRUE) {
-        dev_kfree_skb_irq(skb);
-        spin_unlock_irq(&pDevice->lock);
-        return 0;
-    };
-
-
-    cbMPDULen = skb->len;
-    pbMPDU = skb->data;
-
-    vDMA0_tx_80211(pDevice, skb);
-
-    spin_unlock_irq(&pDevice->lock);
-
-    return 0;
+	spin_unlock_irq(&pDevice->lock);
 
+	return NETDEV_TX_OK;
 }
 
+static int device_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	PSDevice pDevice = netdev_priv(dev);
+	struct net_device_stats *stats = &pDevice->stats;
 
-static int  device_xmit(struct sk_buff *skb, struct net_device *dev) {
-    PSDevice    pDevice=netdev_priv(dev);
-    struct net_device_stats* pStats = &pDevice->stats;
-
+	spin_lock_irq(&pDevice->lock);
 
-    spin_lock_irq(&pDevice->lock);
+	netif_stop_queue(dev);
 
-    netif_stop_queue(pDevice->dev);
+	if (!pDevice->bLinkPass) {
+		dev_kfree_skb_irq(skb);
+		goto out;
+	}
 
-    if (pDevice->bLinkPass == FALSE) {
-        dev_kfree_skb_irq(skb);
-        spin_unlock_irq(&pDevice->lock);
-        return 0;
-    }
-    if (pDevice->bStopDataPkt == TRUE) {
-        dev_kfree_skb_irq(skb);
-        pStats->tx_dropped++;
-        spin_unlock_irq(&pDevice->lock);
-        return 0;
-    }
+	if (pDevice->bStopDataPkt) {
+		dev_kfree_skb_irq(skb);
+		stats->tx_dropped++;
+		goto out;
+	}
 
-    if(nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb) !=0) {  //mike add:xmit fail!
-         if (netif_queue_stopped(pDevice->dev))
-              netif_wake_queue(pDevice->dev);
-    }
+	if (nsDMA_tx_packet(pDevice, TYPE_AC0DMA, skb)) {
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+	}
 
-    spin_unlock_irq(&pDevice->lock);
+out:
+	spin_unlock_irq(&pDevice->lock);
 
-    return 0;
+	return NETDEV_TX_OK;
 }
 
-
-
 static unsigned const ethernet_polynomial = 0x04c11db7U;
 static inline u32 ether_crc(int length, unsigned char *data)
 {
@@ -1447,12 +1388,12 @@ static int Config_FileGetParameter(unsigned char *string,
 	return FALSE;
 
 //check if current config line is marked by "#" ??
-for(ii=1;;ii++) {
-  if(memcmp(start_p-ii,"\n",1)==0)
-      break;
-  if(memcmp(start_p-ii,"#",1)==0)
-      return FALSE;
-}
+    for (ii = 1; ; ii++) {
+	if (memcmp(start_p - ii, "\n", 1) == 0)
+		break;
+	if (memcmp(start_p - ii, "#", 1) == 0)
+		return FALSE;
+    }
 
 //find target string end point
      end_p = kstrstr(start_p,"\n");
@@ -1585,7 +1526,6 @@ static int Read_config_file(PSDevice pDevice) {
  }
 }
 
-#if 1
 //get other parameter
   {
 	memset(tmpbuffer,0,sizeof(tmpbuffer));
@@ -1598,7 +1538,6 @@ static int Read_config_file(PSDevice pDevice) {
 	 pDevice->config_file.eEncryptionStatus= (int) simple_strtol(tmpbuffer, NULL, 10);
        }
   }
-#endif
 
   kfree(buffer);
   return result;
diff --git a/drivers/staging/vt6656/mib.c b/drivers/staging/vt6656/mib.c
index b694fc86d74..8a6ee72f440 100644
--- a/drivers/staging/vt6656/mib.c
+++ b/drivers/staging/vt6656/mib.c
@@ -347,10 +347,9 @@ void STAvUpdateRDStatCounter(PSStatCounter pStatistic,
     if (WLAN_GET_FC_MOREFRAG(pHeader->wFrameCtl))
         pStatistic->dwRsrRxFragment++;
 
-    if (cbFrameLength < MIN_PACKET_LEN + 4) {
+    if (cbFrameLength < ETH_ZLEN + 4) {
         pStatistic->dwRsrRunt++;
-    }
-    else if (cbFrameLength == MIN_PACKET_LEN + 4) {
+    } else if (cbFrameLength == ETH_ZLEN + 4) {
         pStatistic->dwRsrRxFrmLen64++;
     }
     else if ((65 <= cbFrameLength) && (cbFrameLength <= 127)) {
@@ -364,17 +363,14 @@ void STAvUpdateRDStatCounter(PSStatCounter pStatistic,
     }
     else if ((512 <= cbFrameLength) && (cbFrameLength <= 1023)) {
         pStatistic->dwRsrRxFrmLen512_1023++;
-    }
-    else if ((1024 <= cbFrameLength) && (cbFrameLength <= MAX_PACKET_LEN + 4)) {
+    } else if ((1024 <= cbFrameLength) &&
+	       (cbFrameLength <= ETH_FRAME_LEN + 4)) {
         pStatistic->dwRsrRxFrmLen1024_1518++;
-    } else if (cbFrameLength > MAX_PACKET_LEN + 4) {
+    } else if (cbFrameLength > ETH_FRAME_LEN + 4) {
         pStatistic->dwRsrLong++;
     }
-
 }
 
-
-
 /*
  * Description: Update Rx Statistic Counter and copy Rx buffer
  *
@@ -467,12 +463,10 @@ STAvUpdateTDStatCounter (
     }
     if ( !(byTSR & (TSR_TMO | TSR_RETRYTMO))) {
 
-#ifdef Calcu_LinkQual
    if (byRetyCnt < 2)
         pStatistic->TxNoRetryOkCount ++;
    else
         pStatistic->TxRetryOkCount ++;
-#endif
 
         pStatistic->ullTsrOK++;
         pStatistic->CustomStat.ullTsrAllOK++;
@@ -493,9 +487,7 @@ STAvUpdateTDStatCounter (
     }
     else {
 
-#ifdef Calcu_LinkQual
         pStatistic->TxFailCount ++;
-#endif
 
         pStatistic->dwTsrErr++;
         if (byTSR & TSR_RETRYTMO)
@@ -591,10 +583,7 @@ STAvClear802_11Counter(PSDot11Counters p802_11Counter)
  *
  */
 
-void
-STAvUpdateUSBCounter(PSUSBCounter pUsbCounter,
-                     NTSTATUS ntStatus
-                     )
+void STAvUpdateUSBCounter(PSUSBCounter pUsbCounter, int ntStatus)
 {
 
 //    if ( ntStatus == USBD_STATUS_CRC ) {
@@ -602,5 +591,3 @@ STAvUpdateUSBCounter(PSUSBCounter pUsbCounter,
 //    }
 
 }
-
-
diff --git a/drivers/staging/vt6656/mib.h b/drivers/staging/vt6656/mib.h
index 0455ec9d327..a89cca0c5ec 100644
--- a/drivers/staging/vt6656/mib.h
+++ b/drivers/staging/vt6656/mib.h
@@ -356,7 +356,6 @@ typedef struct tagSStatCounter {
 
     SCustomCounters CustomStat;
 
-   #ifdef Calcu_LinkQual
        //Tx count:
   unsigned long TxNoRetryOkCount;         /* success tx no retry ! */
   unsigned long TxRetryOkCount;           /* success tx but retry ! */
@@ -367,12 +366,9 @@ typedef struct tagSStatCounter {
       //statistic
     unsigned long SignalStren;
     unsigned long LinkQuality;
-   #endif
 
 } SStatCounter, *PSStatCounter;
 
-#define NTSTATUS        int
-
 /*---------------------  Export Classes  ----------------------------*/
 
 /*---------------------  Export Variables  --------------------------*/
@@ -381,7 +377,9 @@ typedef struct tagSStatCounter {
 
 void STAvClearAllCounter(PSStatCounter pStatistic);
 
-void STAvUpdateIsrStatCounter (PSStatCounter pStatistic, BYTE byIsr0, BYTE byIsr1);
+void STAvUpdateIsrStatCounter(PSStatCounter pStatistic,
+			      BYTE byIsr0,
+			      BYTE byIsr1);
 
 void STAvUpdateRDStatCounter(PSStatCounter pStatistic,
 			     BYTE byRSR, BYTE byNewRSR, BYTE byRxSts,
@@ -393,14 +391,8 @@ void STAvUpdateRDStatCounterEx(PSStatCounter pStatistic,
 			       BYTE byRxRate, PBYTE pbyBuffer,
 			       unsigned int cbFrameLength);
 
-void
-STAvUpdateTDStatCounter (
-    PSStatCounter   pStatistic,
-    BYTE            byPktNum,
-    BYTE            byRate,
-    BYTE            byTSR
-    );
-
+void STAvUpdateTDStatCounter(PSStatCounter pStatistic, BYTE byPktNum,
+			     BYTE byRate, BYTE byTSR);
 
 void
 STAvUpdate802_11Counter(
@@ -413,11 +405,6 @@ STAvUpdate802_11Counter(
     );
 
 void STAvClear802_11Counter(PSDot11Counters p802_11Counter);
-
-void
-STAvUpdateUSBCounter(
-    PSUSBCounter    pUsbCounter,
-    NTSTATUS        ntStatus
-    );
+void STAvUpdateUSBCounter(PSUSBCounter pUsbCounter, int ntStatus);
 
 #endif /* __MIB_H__ */
diff --git a/drivers/staging/vt6656/michael.c b/drivers/staging/vt6656/michael.c
index 671a8cf33e2..4d419814f27 100644
--- a/drivers/staging/vt6656/michael.c
+++ b/drivers/staging/vt6656/michael.c
@@ -74,7 +74,7 @@ static DWORD s_dwGetUINT32 (BYTE * p)
 {
 	DWORD res = 0;
 	unsigned int i;
-	for(i=0; i<4; i++ )
+	for (i = 0; i < 4; i++)
 		res |= (*p++) << (8*i);
 	return res;
 }
@@ -83,7 +83,7 @@ static void s_vPutUINT32(BYTE *p, DWORD val)
 // Convert from DWORD to BYTE[] in a portable way
 {
 	unsigned int i;
-	for(i=0; i<4; i++ ) {
+	for (i = 0; i < 4; i++) {
 		*p++ = (BYTE) (val & 0xff);
 		val >>= 8;
 	}
diff --git a/drivers/staging/vt6656/michael.h b/drivers/staging/vt6656/michael.h
index 3ab60928ef3..81351f50623 100644
--- a/drivers/staging/vt6656/michael.h
+++ b/drivers/staging/vt6656/michael.h
@@ -49,8 +49,8 @@ void MIC_vGetMIC(PDWORD pdwL, PDWORD pdwR);
 /*---------------------  Export Macros ------------------------------*/
 
 // Rotation functions on 32 bit values
-#define ROL32( A, n ) \
- ( ((A) << (n)) | ( ((A)>>(32-(n)))  & ( (1UL << (n)) - 1 ) ) )
-#define ROR32( A, n ) ROL32( (A), 32-(n) )
+#define ROL32(A, n) \
+ (((A) << (n)) | (((A)>>(32-(n)))  & ((1UL << (n)) - 1)))
+#define ROR32(A, n) ROL32((A), 32-(n))
 
 #endif /* __MICHAEL_H__ */
diff --git a/drivers/staging/vt6656/power.c b/drivers/staging/vt6656/power.c
index 766c5be6fd2..4d7d4e014d0 100644
--- a/drivers/staging/vt6656/power.c
+++ b/drivers/staging/vt6656/power.c
@@ -19,7 +19,7 @@
  *
  * File: power.c
  *
- * Purpose: Handles 802.11 power managment  functions
+ * Purpose: Handles 802.11 power management  functions
  *
  * Author: Lyndon Chen
  *
@@ -290,17 +290,11 @@ BOOL PSbSendNullPacket(void *hDeviceContext)
         return FALSE;
     }
 
-//2007-0115-03<Add>by MikeLiu
-#ifdef TxInSleep
      if ((pDevice->bEnablePSMode == FALSE) &&
 	  (pDevice->fTxDataInSleep == FALSE)){
         return FALSE;
     }
-#else
-    if (pDevice->bEnablePSMode == FALSE) {
-        return FALSE;
-    }
-#endif
+
     memset(pMgmt->pbyPSPacketPool, 0, sizeof(STxMgmtPacket) + WLAN_NULLDATA_FR_MAXLEN);
     pTxPacket = (PSTxMgmtPacket)pMgmt->pbyPSPacketPool;
     pTxPacket->p80211Header = (PUWLAN_80211HDR)((PBYTE)pTxPacket + sizeof(STxMgmtPacket));
diff --git a/drivers/staging/vt6656/power.h b/drivers/staging/vt6656/power.h
index 50792bb8c97..41bffe528b4 100644
--- a/drivers/staging/vt6656/power.h
+++ b/drivers/staging/vt6656/power.h
@@ -18,7 +18,7 @@
  *
  * File: power.h
  *
- * Purpose: Handles 802.11 power managment  functions
+ * Purpose: Handles 802.11 power management  functions
  *
  * Author: Lyndon Chen
  *
diff --git a/drivers/staging/vt6656/rf.h b/drivers/staging/vt6656/rf.h
index d4f8b94132b..f5ba8fd7f81 100644
--- a/drivers/staging/vt6656/rf.h
+++ b/drivers/staging/vt6656/rf.h
@@ -64,11 +64,7 @@ extern const BYTE RFaby11aChannelIndex[200];
 /*---------------------  Export Functions  --------------------------*/
 
 BOOL IFRFbWriteEmbeded(PSDevice pDevice, DWORD dwData);
-BOOL RFbSetPower (
-      PSDevice  pDevice,
-      unsigned int      uRATE,
-      unsigned int      uCH
-    );
+BOOL RFbSetPower(PSDevice pDevice, unsigned int uRATE, unsigned int uCH);
 
 BOOL RFbRawSetPower(
       PSDevice  pDevice,
@@ -76,17 +72,8 @@ BOOL RFbRawSetPower(
       unsigned int      uRATE
     );
 
-void
-RFvRSSITodBm (
-      PSDevice pDevice,
-      BYTE     byCurrRSSI,
-    long *    pldBm
-    );
-
-void
-RFbRFTableDownload (
-      PSDevice pDevice
-    );
+void RFvRSSITodBm(PSDevice pDevice, BYTE byCurrRSSI, long *pldBm);
+void RFbRFTableDownload(PSDevice pDevice);
 
 BOOL s_bVT3226D0_11bLoCurrentAdjust(
       PSDevice    pDevice,
diff --git a/drivers/staging/vt6656/rndis.h b/drivers/staging/vt6656/rndis.h
index ac842dd13a6..fccf7e98eb6 100644
--- a/drivers/staging/vt6656/rndis.h
+++ b/drivers/staging/vt6656/rndis.h
@@ -152,7 +152,7 @@ typedef struct _CMD_CHANGE_BBTYPE
 
 /*---------------------  Export Macros -------------------------*/
 
-#define EXCH_WORD(w)        ( (WORD)((WORD)(w)<<8) | (WORD)((WORD)(w)>>8) )
+#define EXCH_WORD(w) ((WORD)((WORD)(w)<<8) | (WORD)((WORD)(w)>>8))
 
 /*---------------------  Export Variables  --------------------------*/
 
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 3e7e56649a5..deca2137d92 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -61,10 +61,7 @@
 #include "rf.h"
 #include "datarate.h"
 #include "usbpipe.h"
-
-#ifdef WPA_SM_Transtatus
 #include "iocmd.h"
-#endif
 
 /*---------------------  Static Definitions -------------------------*/
 
@@ -304,10 +301,9 @@ s_vSaveTxPktInfo(PSDevice pDevice, BYTE byPktNum, PBYTE pbyDestAddr, WORD wPktLe
 {
     PSStatCounter           pStatistic=&(pDevice->scStatistic);
 
-
-    if (IS_BROADCAST_ADDRESS(pbyDestAddr))
+    if (is_broadcast_ether_addr(pbyDestAddr))
         pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni = TX_PKT_BROAD;
-    else if (IS_MULTICAST_ADDRESS(pbyDestAddr))
+    else if (is_multicast_ether_addr(pbyDestAddr))
         pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni = TX_PKT_MULTI;
     else
         pStatistic->abyTxPktInfo[byPktNum].byBroadMultiUni = TX_PKT_UNI;
@@ -319,9 +315,6 @@ s_vSaveTxPktInfo(PSDevice pDevice, BYTE byPktNum, PBYTE pbyDestAddr, WORD wPktLe
 	   ETH_ALEN);
 }
 
-
-
-
 static
 void
 s_vFillTxKey (
@@ -1473,7 +1466,7 @@ s_bPacketToWirelessUsb(
     memset(pTxBufHead, 0, sizeof(TX_BUFFER));
 
     // Get pkt type
-    if (ntohs(psEthHeader->wType) > MAX_DATA_LEN) {
+    if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
         if (pDevice->dwDiagRefCount == 0) {
             cb802_1_H_len = 8;
         } else {
@@ -1492,17 +1485,16 @@ s_bPacketToWirelessUsb(
         bNeedACK = FALSE;
         pTxBufHead->wFIFOCtl = pTxBufHead->wFIFOCtl & (~FIFOCTL_NEEDACK);
     } else { //if (pDevice->dwDiagRefCount != 0) {
-        if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
-            (pDevice->eOPMode == OP_MODE_AP)) {
-            if (IS_MULTICAST_ADDRESS(&(psEthHeader->abyDstAddr[0])) ||
-                IS_BROADCAST_ADDRESS(&(psEthHeader->abyDstAddr[0]))) {
-                bNeedACK = FALSE;
-                pTxBufHead->wFIFOCtl = pTxBufHead->wFIFOCtl & (~FIFOCTL_NEEDACK);
-            }
-            else {
-                bNeedACK = TRUE;
-                pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
-            }
+	if ((pDevice->eOPMode == OP_MODE_ADHOC) ||
+	    (pDevice->eOPMode == OP_MODE_AP)) {
+		if (is_multicast_ether_addr(psEthHeader->abyDstAddr)) {
+			bNeedACK = FALSE;
+			pTxBufHead->wFIFOCtl =
+				pTxBufHead->wFIFOCtl & (~FIFOCTL_NEEDACK);
+		} else {
+			bNeedACK = TRUE;
+			pTxBufHead->wFIFOCtl |= FIFOCTL_NEEDACK;
+		}
         }
         else {
             // MSDUs in Infra mode always need ACK
@@ -1708,7 +1700,7 @@ s_bPacketToWirelessUsb(
     }
 
     // 802.1H
-    if (ntohs(psEthHeader->wType) > MAX_DATA_LEN) {
+    if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
         if (pDevice->dwDiagRefCount == 0) {
             if ( (psEthHeader->wType == TYPE_PKT_IPX) ||
                  (psEthHeader->wType == cpu_to_le16(0xF380))) {
@@ -2037,9 +2029,7 @@ CMD_STATUS csMgmt_xmit(
     pTxBufHead->wFIFOCtl |= FIFOCTL_TMOEN;
     pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
 
-
-    if (IS_MULTICAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0])) ||
-        IS_BROADCAST_ADDRESS(&(pPacket->p80211Header->sA3.abyAddr1[0]))) {
+    if (is_multicast_ether_addr(pPacket->p80211Header->sA3.abyAddr1)) {
         bNeedACK = FALSE;
     }
     else {
@@ -2446,9 +2436,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb) {
     pTxBufHead->wFIFOCtl |= FIFOCTL_TMOEN;
     pTxBufHead->wTimeStamp = cpu_to_le16(DEFAULT_MGN_LIFETIME_RES_64us);
 
-
-    if (IS_MULTICAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0])) ||
-        IS_BROADCAST_ADDRESS(&(p80211Header->sA3.abyAddr1[0]))) {
+    if (is_multicast_ether_addr(p80211Header->sA3.abyAddr1)) {
         bNeedACK = FALSE;
         if (pDevice->bEnableHostWEP) {
             uNodeIndex = 0;
@@ -2741,14 +2729,7 @@ vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb) {
  * Return Value: NULL
  */
 
-
-
-NTSTATUS
-nsDMA_tx_packet(
-      PSDevice pDevice,
-      unsigned int    uDMAIdx,
-      struct sk_buff *skb
-    )
+int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
 {
     PSMgmtObject    pMgmt = &(pDevice->sMgmtObj);
     unsigned int BytesToWrite = 0, uHeaderLen = 0;
@@ -2770,9 +2751,6 @@ nsDMA_tx_packet(
     unsigned int            status;
     WORD            wKeepRate = pDevice->wCurrentRate;
     struct net_device_stats* pStats = &pDevice->stats;
-//#ifdef WPA_SM_Transtatus
-  //  extern SWPAResult wpa_Result;
-//#endif
      BOOL            bTxeapol_key = FALSE;
 
 
@@ -2783,7 +2761,7 @@ nsDMA_tx_packet(
             return 0;
         }
 
-        if (IS_MULTICAST_ADDRESS((PBYTE)(skb->data))) {
+	if (is_multicast_ether_addr((PBYTE)(skb->data))) {
             uNodeIndex = 0;
             bNodeExist = TRUE;
             if (pMgmt->sNodeDBTable[0].bPSEnable) {
@@ -2975,7 +2953,7 @@ nsDMA_tx_packet(
     else {
         if (pDevice->eOPMode == OP_MODE_ADHOC) {
             // Adhoc Tx rate decided from node DB
-            if (IS_MULTICAST_ADDRESS(&(pDevice->sTxEthHeader.abyDstAddr[0]))) {
+	    if (is_multicast_ether_addr(pDevice->sTxEthHeader.abyDstAddr)) {
                 // Multicast use highest data rate
                 pDevice->wCurrentRate = pMgmt->sNodeDBTable[0].wTxDataRate;
                 // preamble type
@@ -3071,28 +3049,12 @@ nsDMA_tx_packet(
         }
         else {
 
-#if 0
-            if((pDevice->fWPA_Authened == FALSE) &&
-		((pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK)||(pMgmt->eAuthenMode = WMAC_AUTH_WPA2PSK))){
-                  dev_kfree_skb_irq(skb);
-                  pStats->tx_dropped++;
-                  return STATUS_FAILURE;
-            }
-	        else if (pTransmitKey == NULL) {
-                DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
-                dev_kfree_skb_irq(skb);
-                pStats->tx_dropped++;
-                return STATUS_FAILURE;
-            }
-#else
             if (pTransmitKey == NULL) {
                 DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"return no tx key\n");
                 dev_kfree_skb_irq(skb);
                 pStats->tx_dropped++;
                 return STATUS_FAILURE;
             }
-#endif
-
         }
     }
 
@@ -3261,7 +3223,8 @@ bRelayPacketSend (
     if (pDevice->wCurrentRate <= RATE_11M)
         byPktType = PK_TYPE_11B;
 
-    BytesToWrite = uDataLen + U_CRC_LEN;
+    BytesToWrite = uDataLen + ETH_FCS_LEN;
+
     // Convert the packet to an usb frame and copy into our buffer
     // and send the irp.
 
diff --git a/drivers/staging/vt6656/rxtx.h b/drivers/staging/vt6656/rxtx.h
index f90de42d7ab..f99acf1d8eb 100644
--- a/drivers/staging/vt6656/rxtx.h
+++ b/drivers/staging/vt6656/rxtx.h
@@ -683,9 +683,9 @@ bPacketToWirelessUsb(
     );
 
 void vDMA0_tx_80211(PSDevice  pDevice, struct sk_buff *skb);
-NTSTATUS nsDMA_tx_packet(PSDevice  pDevice,
-			 unsigned int uDMAIdx,
-			 struct sk_buff *skb);
+int nsDMA_tx_packet(PSDevice pDevice,
+		    unsigned int uDMAIdx,
+		    struct sk_buff *skb);
 CMD_STATUS csMgmt_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
 CMD_STATUS csBeacon_xmit(PSDevice pDevice, PSTxMgmtPacket pPacket);
 BOOL bRelayPacketSend(PSDevice pDevice, PBYTE pbySkbData,
diff --git a/drivers/staging/vt6656/tether.h b/drivers/staging/vt6656/tether.h
index d63586d5cdb..be87020d532 100644
--- a/drivers/staging/vt6656/tether.h
+++ b/drivers/staging/vt6656/tether.h
@@ -36,25 +36,10 @@
 //
 // constants
 //
-#define U_CRC_LEN           4           //
 #define U_ETHER_ADDR_STR_LEN (ETH_ALEN * 2 + 1)
                                         // Ethernet address string length
-
-#define MIN_DATA_LEN        46          // min data length
-#define MAX_DATA_LEN        1500        // max data length
-
-#define MIN_PACKET_LEN      (MIN_DATA_LEN + ETH_HLEN)
-                                        // 60
-                                        // min total packet length (tx)
-#define MAX_PACKET_LEN      (MAX_DATA_LEN + ETH_HLEN)
-                                        // 1514
-                                        // max total packet length (tx)
-
-#define MAX_LOOKAHEAD_SIZE  MAX_PACKET_LEN
-
 #define U_MULTI_ADDR_LEN    8           // multicast address length
 
-
 #ifdef __BIG_ENDIAN
 
 #define TYPE_PKT_IP         0x0800      //
@@ -168,7 +153,7 @@ typedef struct tagSEthernetHeader {
     BYTE    abyDstAddr[ETH_ALEN];
     BYTE    abySrcAddr[ETH_ALEN];
     WORD    wType;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 SEthernetHeader, *PSEthernetHeader;
 
 
@@ -179,7 +164,7 @@ typedef struct tagS802_3Header {
     BYTE    abyDstAddr[ETH_ALEN];
     BYTE    abySrcAddr[ETH_ALEN];
     WORD    wLen;
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 S802_3Header, *PS802_3Header;
 
 //
@@ -193,30 +178,10 @@ typedef struct tagS802_11Header {
     BYTE    abyAddr3[ETH_ALEN];
     WORD    wSeqCtl;
     BYTE    abyAddr4[ETH_ALEN];
-}__attribute__ ((__packed__))
+} __attribute__ ((__packed__))
 S802_11Header, *PS802_11Header;
 
 /*---------------------  Export Macros ------------------------------*/
-// Frame type macro
-
-#define IS_MULTICAST_ADDRESS(pbyEtherAddr)          \
-    ((*(PBYTE)(pbyEtherAddr) & 0x01) == 1)
-
-#define IS_BROADCAST_ADDRESS(pbyEtherAddr) (        \
-    (*(PDWORD)(pbyEtherAddr) == 0xFFFFFFFFL) &&     \
-    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0xFFFF) \
-)
-
-#define IS_NULL_ADDRESS(pbyEtherAddr) (             \
-    (*(PDWORD)(pbyEtherAddr) == 0L) &&              \
-    (*(PWORD)((PBYTE)(pbyEtherAddr) + 4) == 0)      \
-)
-
-#define IS_ETH_ADDRESS_EQUAL(pbyAddr1, pbyAddr2) (  \
-    (*(PDWORD)(pbyAddr1) == *(PDWORD)(pbyAddr2)) && \
-    (*(PWORD)((PBYTE)(pbyAddr1) + 4) ==             \
-    *(PWORD)((PBYTE)(pbyAddr2) + 4))                \
-)
 
 /*---------------------  Export Classes  ----------------------------*/
 
diff --git a/drivers/staging/vt6656/tkip.c b/drivers/staging/vt6656/tkip.c
index f83af5913aa..a6bd533f957 100644
--- a/drivers/staging/vt6656/tkip.c
+++ b/drivers/staging/vt6656/tkip.c
@@ -129,8 +129,6 @@ const BYTE TKIP_Sbox_Upper[256] = {
 //STKIPKeyManagement  sTKIPKeyTable[MAX_TKIP_KEY];
 
 /*---------------------  Static Functions  --------------------------*/
-unsigned int tkip_sbox(unsigned int index);
-unsigned int rotr1(unsigned int a);
 
 /*---------------------  Export Variables  --------------------------*/
 
@@ -139,7 +137,7 @@ unsigned int rotr1(unsigned int a);
 /* Returns a 16 bit value from a 64K entry table. The Table */
 /* is synthesized from two 256 entry byte wide tables.      */
 /************************************************************/
-unsigned int tkip_sbox(unsigned int index)
+static unsigned int tkip_sbox(unsigned int index)
 {
     unsigned int index_low;
     unsigned int index_high;
@@ -155,7 +153,7 @@ unsigned int tkip_sbox(unsigned int index)
 };
 
 
-unsigned int rotr1(unsigned int a)
+static unsigned int rotr1(unsigned int a)
 {
     unsigned int b;
 
diff --git a/drivers/staging/vt6656/ttype.h b/drivers/staging/vt6656/ttype.h
index c27f9858e2e..8e9450ef399 100644
--- a/drivers/staging/vt6656/ttype.h
+++ b/drivers/staging/vt6656/ttype.h
@@ -31,23 +31,6 @@
 
 /******* Common definitions and typedefs ***********************************/
 
-//2007-0115-05<Add>by MikeLiu
-#ifndef TxInSleep
-#define TxInSleep
-#endif
-
-//DavidWang
-
-//2007-0814-01<Add>by MikeLiu
-#ifndef Safe_Close
-#define Safe_Close
-#endif
-
-//2008-0131-02<Add>by MikeLiu
-#ifndef Adhoc_STA
-#define Adhoc_STA
-#endif
-
 typedef int             BOOL;
 
 #if !defined(TRUE)
@@ -57,19 +40,6 @@ typedef int             BOOL;
 #define FALSE           0
 #endif
 
-//2007-0809-01<Add>by MikeLiu
-#ifndef  update_BssList
-#define update_BssList
-#endif
-
-#ifndef WPA_SM_Transtatus
-#define WPA_SM_Transtatus
-#endif
-
-#ifndef Calcu_LinkQual
-#define Calcu_LinkQual
-#endif
-
 /****** Simple typedefs  ***************************************************/
 
 typedef unsigned char   BYTE;           //  8-bit
@@ -94,7 +64,6 @@ typedef unsigned long   ULONG_PTR;      // 32-bit
 typedef unsigned long   DWORD_PTR;      // 32-bit
 
 // boolean pointer
-typedef unsigned int *   PUINT;
 
 typedef BYTE *           PBYTE;
 
diff --git a/drivers/staging/vt6656/usbpipe.c b/drivers/staging/vt6656/usbpipe.c
index fd2355e34fb..a32785cb9d1 100644
--- a/drivers/staging/vt6656/usbpipe.c
+++ b/drivers/staging/vt6656/usbpipe.c
@@ -107,10 +107,7 @@ s_nsControlInUsbIoCompleteWrite(
 
 /*---------------------  Export Functions  --------------------------*/
 
-
-
-NTSTATUS
-PIPEnsControlOutAsyn(
+int PIPEnsControlOutAsyn(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -119,8 +116,7 @@ PIPEnsControlOutAsyn(
      PBYTE        pbyBuffer
     )
 {
-    NTSTATUS                ntStatus;
-
+	int ntStatus;
 
     if (MP_TEST_FLAG(pDevice, fMP_DISCONNECTED))
         return STATUS_FAILURE;
@@ -156,12 +152,7 @@ PIPEnsControlOutAsyn(
     return ntStatus;
 }
 
-
-
-
-
-NTSTATUS
-PIPEnsControlOut(
+int PIPEnsControlOut(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -170,10 +161,9 @@ PIPEnsControlOut(
      PBYTE        pbyBuffer
     )
 {
-    NTSTATUS            ntStatus = 0;
+	int ntStatus = 0;
     int ii;
 
-
     if (MP_TEST_FLAG(pDevice, fMP_DISCONNECTED))
         return STATUS_FAILURE;
 
@@ -219,11 +209,7 @@ PIPEnsControlOut(
     return STATUS_SUCCESS;
 }
 
-
-
-
-NTSTATUS
-PIPEnsControlIn(
+int PIPEnsControlIn(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -232,7 +218,7 @@ PIPEnsControlIn(
        PBYTE   pbyBuffer
     )
 {
-    NTSTATUS            ntStatus = 0;
+	int ntStatus = 0;
     int ii;
 
     if (MP_TEST_FLAG(pDevice, fMP_DISCONNECTED))
@@ -360,13 +346,9 @@ s_nsControlInUsbIoCompleteRead(
  * Return Value: STATUS_INSUFFICIENT_RESOURCES or result of IoCallDriver
  *
  */
-NTSTATUS
-PIPEnsInterruptRead(
-     PSDevice pDevice
-    )
+int PIPEnsInterruptRead(PSDevice pDevice)
 {
-    NTSTATUS            ntStatus = STATUS_FAILURE;
-
+    int ntStatus = STATUS_FAILURE;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->s_nsStartInterruptUsbRead()\n");
 
@@ -381,29 +363,6 @@ PIPEnsInterruptRead(
     // Now that we have created the urb, we will send a
     // request to the USB device object.
     //
-#if 0            //reserve int URB submit
-	usb_fill_int_urb(pDevice->pInterruptURB,
-	                 pDevice->usb,
-	                 usb_rcvintpipe(pDevice->usb, 1),
-			 (void *) pDevice->intBuf.pDataBuf,
-	                 MAX_INTERRUPT_SIZE,
-	                 s_nsInterruptUsbIoCompleteRead,
-	                 pDevice,
-	                 pDevice->int_interval
-	                 );
-#else            //replace int URB submit by bulk transfer
-#ifndef Safe_Close
-	usb_fill_int_urb(pDevice->pInterruptURB,
-	                 pDevice->usb,
-	                 usb_rcvintpipe(pDevice->usb, 1),
-			 (void *) pDevice->intBuf.pDataBuf,
-	                 MAX_INTERRUPT_SIZE,
-	                 s_nsInterruptUsbIoCompleteRead,
-	                 pDevice,
-	                 pDevice->int_interval
-	                 );
-#else
-
     pDevice->pInterruptURB->interval = pDevice->int_interval;
 
 usb_fill_bulk_urb(pDevice->pInterruptURB,
@@ -413,8 +372,6 @@ usb_fill_bulk_urb(pDevice->pInterruptURB,
 		MAX_INTERRUPT_SIZE,
 		s_nsInterruptUsbIoCompleteRead,
 		pDevice);
-#endif
-#endif
 
 	ntStatus = usb_submit_urb(pDevice->pInterruptURB, GFP_ATOMIC);
 	if (ntStatus != 0) {
@@ -448,8 +405,7 @@ s_nsInterruptUsbIoCompleteRead(
 
 {
     PSDevice        pDevice;
-    NTSTATUS        ntStatus;
-
+    int ntStatus;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->s_nsInterruptUsbIoCompleteRead\n");
     //
@@ -495,13 +451,6 @@ s_nsInterruptUsbIoCompleteRead(
 
 
     if (pDevice->fKillEventPollingThread != TRUE) {
-   #if 0               //reserve int URB submit
-	ntStatus = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ntStatus != 0) {
-	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Re-Submit int URB failed %d\n", ntStatus);
-    }
-   #else                                                                                     //replace int URB submit by bulk transfer
-    #ifdef Safe_Close
        usb_fill_bulk_urb(pDevice->pInterruptURB,
 		      pDevice->usb,
 		      usb_rcvbulkpipe(pDevice->usb, 1),
@@ -514,11 +463,6 @@ s_nsInterruptUsbIoCompleteRead(
 	if (ntStatus != 0) {
 	    DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Submit int URB failed %d\n", ntStatus);
            }
-
-    #else
-        tasklet_schedule(&pDevice->EventWorkItem);
-    #endif
-#endif
     }
     //
     // We return STATUS_MORE_PROCESSING_REQUIRED so that the completion
@@ -540,13 +484,9 @@ s_nsInterruptUsbIoCompleteRead(
  * Return Value: STATUS_INSUFFICIENT_RESOURCES or result of IoCallDriver
  *
  */
-NTSTATUS
-PIPEnsBulkInUsbRead(
-     PSDevice pDevice,
-     PRCB     pRCB
-    )
+int PIPEnsBulkInUsbRead(PSDevice pDevice, PRCB pRCB)
 {
-    NTSTATUS            ntStatus= 0;
+	int ntStatus = 0;
     struct urb          *pUrb;
 
 
@@ -616,9 +556,7 @@ s_nsBulkInUsbIoCompleteRead(
     unsigned long   bytesRead;
     BOOL    bIndicateReceive = FALSE;
     BOOL    bReAllocSkb = FALSE;
-    NTSTATUS    status;
-
-
+    int status;
 
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"---->s_nsBulkInUsbIoCompleteRead\n");
     status = urb->status;
@@ -628,9 +566,7 @@ s_nsBulkInUsbIoCompleteRead(
         pDevice->ulBulkInError++;
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BULK In failed %d\n", status);
 
-     	#ifdef Calcu_LinkQual
            pDevice->scStatistic.RxFcsErrCnt ++;
-	#endif
 //todo...xxxxxx
 //        if (status == USBD_STATUS_CRC) {
 //            pDevice->ulBulkInContCRCError++;
@@ -644,9 +580,7 @@ s_nsBulkInUsbIoCompleteRead(
         pDevice->ulBulkInContCRCError = 0;
         pDevice->ulBulkInBytesRead += bytesRead;
 
-	#ifdef Calcu_LinkQual
            pDevice->scStatistic.RxOkCnt ++;
-	#endif
     }
 
 
@@ -690,7 +624,7 @@ PIPEnsSendBulkOut(
       PUSB_SEND_CONTEXT pContext
     )
 {
-    NTSTATUS            status;
+    int status;
     struct urb          *pUrb;
 
 
@@ -771,7 +705,7 @@ s_nsBulkOutIoCompleteWrite(
     )
 {
     PSDevice            pDevice;
-    NTSTATUS            status;
+    int status;
     CONTEXT_TYPE        ContextType;
     unsigned long               ulBufLen;
     PUSB_SEND_CONTEXT   pContext;
@@ -803,10 +737,7 @@ s_nsBulkOutIoCompleteWrite(
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Write %d bytes\n",(int)ulBufLen);
         pDevice->ulBulkOutBytesWrite += ulBufLen;
         pDevice->ulBulkOutContCRCError = 0;
-	//2007-0115-06<Add>by MikeLiu
-           #ifdef TxInSleep
-             pDevice->nTxDataTimeCout = 0;
-           #endif
+	pDevice->nTxDataTimeCout = 0;
 
     } else {
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"BULK Out failed %d\n", status);
diff --git a/drivers/staging/vt6656/usbpipe.h b/drivers/staging/vt6656/usbpipe.h
index f852b39027a..b3673474a9e 100644
--- a/drivers/staging/vt6656/usbpipe.h
+++ b/drivers/staging/vt6656/usbpipe.h
@@ -41,8 +41,7 @@
 
 /*---------------------  Export Functions  --------------------------*/
 
-NTSTATUS
-PIPEnsControlOut(
+int PIPEnsControlOut(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -51,10 +50,7 @@ PIPEnsControlOut(
      PBYTE        pbyBuffer
     );
 
-
-
-NTSTATUS
-PIPEnsControlOutAsyn(
+int PIPEnsControlOutAsyn(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -63,8 +59,7 @@ PIPEnsControlOutAsyn(
      PBYTE        pbyBuffer
     );
 
-NTSTATUS
-PIPEnsControlIn(
+int PIPEnsControlIn(
      PSDevice     pDevice,
      BYTE         byRequest,
      WORD         wValue,
@@ -73,24 +68,8 @@ PIPEnsControlIn(
        PBYTE   pbyBuffer
     );
 
-
-
-
-NTSTATUS
-PIPEnsInterruptRead(
-     PSDevice pDevice
-    );
-
-NTSTATUS
-PIPEnsBulkInUsbRead(
-     PSDevice pDevice,
-     PRCB     pRCB
-    );
-
-NTSTATUS
-PIPEnsSendBulkOut(
-      PSDevice pDevice,
-      PUSB_SEND_CONTEXT pContext
-    );
+int PIPEnsInterruptRead(PSDevice pDevice);
+int PIPEnsBulkInUsbRead(PSDevice pDevice, PRCB pRCB);
+int PIPEnsSendBulkOut(PSDevice pDevice, PUSB_SEND_CONTEXT pContext);
 
 #endif /* __USBPIPE_H__ */
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index 72e21b6f0e8..686747a0929 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -565,11 +565,9 @@ void vRunCommand(void *hDeviceContext)
                 return;
             }
 
-//20080131-03,<Add> by Mike Liu
-	#ifdef Adhoc_STA
             memcpy(pMgmt->abyAdHocSSID,pMgmt->abyDesireSSID,
                               ((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->len + WLAN_IEHDR_LEN);
-	#endif
+
             pItemSSID = (PWLAN_IE_SSID)pMgmt->abyDesireSSID;
             pItemSSIDCurr = (PWLAN_IE_SSID)pMgmt->abyCurrSSID;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO" cmd: desire ssid = %s\n", pItemSSID->abySSID);
@@ -716,18 +714,6 @@ void vRunCommand(void *hDeviceContext)
 	       return;
 	   }
 	          pDevice->byLinkWaitCount = 0;
-		 #if 0
-                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
-                        {
-                  	union iwreq_data  wrqu;
-                  	memset(&wrqu, 0, sizeof (wrqu));
-                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:AUTHENTICATE_WAIT_timeout)\n");
-                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
-                       }
-                    #endif
-	         #endif
 
             s_bCommandComplete(pDevice);
             break;
@@ -754,8 +740,6 @@ void vRunCommand(void *hDeviceContext)
                     netif_wake_queue(pDevice->dev);
                 }
 
-	//2007-0115-07<Add>by MikeLiu
-	     #ifdef TxInSleep
 		 if(pDevice->IsTxDataTrigger != FALSE)   {    //TxDataTimer is not triggered at the first time
                      // printk("Re-initial TxDataTimer****\n");
 		    del_timer(&pDevice->sTimerTxData);
@@ -771,7 +755,6 @@ void vRunCommand(void *hDeviceContext)
 		 }
 		pDevice->IsTxDataTrigger = TRUE;
                 add_timer(&pDevice->sTimerTxData);
-             #endif
 
             }
 	   else if(pMgmt->eCurrState < WMAC_STATE_ASSOCPENDING) {
@@ -785,18 +768,6 @@ void vRunCommand(void *hDeviceContext)
 	       return;
 	   }
 	          pDevice->byLinkWaitCount = 0;
-		#if 0
-                     #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
-                    // if(pDevice->bWPASuppWextEnabled == TRUE)
-                        {
-                  	union iwreq_data  wrqu;
-                  	memset(&wrqu, 0, sizeof (wrqu));
-                          wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-                  	printk("wireless_send_event--->SIOCGIWAP(disassociated:ASSOCIATE_WAIT_timeout)\n");
-                  	wireless_send_event(pDevice->dev, SIOCGIWAP, &wrqu, NULL);
-                       }
-                    #endif
-		#endif
 
             s_bCommandComplete(pDevice);
             break;
@@ -907,7 +878,7 @@ void vRunCommand(void *hDeviceContext)
        //         CARDbRadioPowerOff(pDevice);
        //2008-09-09<Add> BY Mike:Hot Key for Radio On/Off
        {
-        NTSTATUS        ntStatus = STATUS_SUCCESS;
+	       int ntStatus = STATUS_SUCCESS;
         BYTE            byTmp;
 
         ntStatus = CONTROLnsRequestIn(pDevice,
@@ -1300,8 +1271,6 @@ void vResetCommandTimer(void *hDeviceContext)
     pDevice->bCmdClear = FALSE;
 }
 
-//2007-0115-08<Add>by MikeLiu
-#ifdef TxInSleep
 void BSSvSecondTxData(void *hDeviceContext)
 {
   PSDevice        pDevice = (PSDevice)hDeviceContext;
@@ -1320,12 +1289,8 @@ void BSSvSecondTxData(void *hDeviceContext)
 
   spin_lock_irq(&pDevice->lock);
   //is wap_supplicant running successful OR only open && sharekey mode!
-  #if 1
   if(((pDevice->bLinkPass ==TRUE)&&(pMgmt->eAuthenMode < WMAC_AUTH_WPA)) ||  //open && sharekey linking
       (pDevice->fWPA_Authened == TRUE)) {   //wpa linking
- #else
-  if(pDevice->bLinkPass ==TRUE) {
- #endif
         //   printk("mike:%s-->InSleep Tx Data Procedure\n",__FUNCTION__);
 	  pDevice->fTxDataInSleep = TRUE;
 	  PSbSendNullPacket(pDevice);      //send null packet
@@ -1337,5 +1302,3 @@ void BSSvSecondTxData(void *hDeviceContext)
   add_timer(&pDevice->sTimerTxData);
   return;
 }
-#endif
-
diff --git a/drivers/staging/vt6656/wcmd.h b/drivers/staging/vt6656/wcmd.h
index 09c4411c689..d24a79dce61 100644
--- a/drivers/staging/vt6656/wcmd.h
+++ b/drivers/staging/vt6656/wcmd.h
@@ -128,9 +128,6 @@ WCMDvCommandThread(
     );
 */
 
-//2007-0115-09<Add>by MikeLiu
-#ifdef TxInSleep
 void BSSvSecondTxData(void *hDeviceContext);
-#endif
 
 #endif /* __WCMD_H__ */
diff --git a/drivers/staging/vt6656/wctl.c b/drivers/staging/vt6656/wctl.c
index 857ce0bc00a..c231ae7176f 100644
--- a/drivers/staging/vt6656/wctl.c
+++ b/drivers/staging/vt6656/wctl.c
@@ -79,7 +79,8 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
         for (ii = 0; ii < DUPLICATE_RX_CACHE_LENGTH; ii++) {
             pCacheEntry = &(pCache->asCacheEntry[uIndex]);
             if ((pCacheEntry->wFmSequence == pMACHeader->wSeqCtl) &&
-                (IS_ETH_ADDRESS_EQUAL (&(pCacheEntry->abyAddr2[0]), &(pMACHeader->abyAddr2[0]))) &&
+		(!compare_ether_addr(&(pCacheEntry->abyAddr2[0]),
+				     &(pMACHeader->abyAddr2[0]))) &&
                 (LOBYTE(pCacheEntry->wFrameCtl) == LOBYTE(pMACHeader->wFrameCtl))
                 ) {
                 /* Duplicate match */
@@ -111,22 +112,21 @@ BOOL WCTLbIsDuplicate (PSCache pCache, PS802_11Header pMACHeader)
  * Return Value: index number in Defragment Database
  *
  */
+
 unsigned int WCTLuSearchDFCB(PSDevice pDevice, PS802_11Header pMACHeader)
 {
 	unsigned int ii;
 
-    for(ii=0;ii<pDevice->cbDFCB;ii++) {
-        if ((pDevice->sRxDFCB[ii].bInUse == TRUE) &&
-            (IS_ETH_ADDRESS_EQUAL (&(pDevice->sRxDFCB[ii].abyAddr2[0]), &(pMACHeader->abyAddr2[0])))
-            ) {
-            //
-            return(ii);
-        }
-    }
-    return(pDevice->cbDFCB);
+	for (ii = 0; ii < pDevice->cbDFCB; ii++) {
+		if ((pDevice->sRxDFCB[ii].bInUse == TRUE) &&
+		    (!compare_ether_addr(&(pDevice->sRxDFCB[ii].abyAddr2[0]),
+					  &(pMACHeader->abyAddr2[0])))) {
+			return ii;
+		}
+	}
+	return pDevice->cbDFCB;
 }
 
-
 /*
  * Description:
  *      Insert received fragment packet in Defragment Database
@@ -147,7 +147,7 @@ unsigned int WCTLuInsertDFCB(PSDevice pDevice, PS802_11Header pMACHeader)
 
     if (pDevice->cbFreeDFCB == 0)
         return(pDevice->cbDFCB);
-    for(ii=0;ii<pDevice->cbDFCB;ii++) {
+    for (ii = 0; ii < pDevice->cbDFCB; ii++) {
         if (pDevice->sRxDFCB[ii].bInUse == FALSE) {
             pDevice->cbFreeDFCB--;
             pDevice->sRxDFCB[ii].uLifetime = pDevice->dwMaxReceiveLifetime;
diff --git a/drivers/staging/vt6656/wmgr.c b/drivers/staging/vt6656/wmgr.c
index 93c15f0580f..e4eca9b060b 100644
--- a/drivers/staging/vt6656/wmgr.c
+++ b/drivers/staging/vt6656/wmgr.c
@@ -353,9 +353,9 @@ void vMgrObjectInit(void *hDeviceContext)
     pMgmt->pbyPSPacketPool = &pMgmt->byPSPacketPool[0];
     pMgmt->pbyMgmtPacketPool = &pMgmt->byMgmtPacketPool[0];
     pMgmt->uCurrChannel = pDevice->uChannel;
-    for(ii=0;ii<WLAN_BSSID_LEN;ii++) {
-        pMgmt->abyDesireBSSID[ii] = 0xFF;
-    }
+    for (ii = 0; ii < WLAN_BSSID_LEN; ii++)
+	pMgmt->abyDesireBSSID[ii] = 0xFF;
+
     pMgmt->sAssocInfo.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION);
     //memset(pMgmt->abyDesireSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN +1);
     pMgmt->byCSSPK = KEY_CTL_NONE;
@@ -373,8 +373,6 @@ void vMgrObjectInit(void *hDeviceContext)
     pDevice->sTimerCommand.function = (TimerFunction)vRunCommand;
     pDevice->sTimerCommand.expires = RUN_AT(HZ);
 
-//2007-0115-10<Add>by MikeLiu
-   #ifdef TxInSleep
     init_timer(&pDevice->sTimerTxData);
     pDevice->sTimerTxData.data = (unsigned long)pDevice;
     pDevice->sTimerTxData.function = (TimerFunction)BSSvSecondTxData;
@@ -382,7 +380,6 @@ void vMgrObjectInit(void *hDeviceContext)
     pDevice->fTxDataInSleep = FALSE;
     pDevice->IsTxDataTrigger = FALSE;
     pDevice->nTxDataTimeCout = 0;
-   #endif
 
     pDevice->cbFreeCmdQueue = CMD_Q_SIZE;
     pDevice->uCmdDequeueIdx = 0;
@@ -1056,7 +1053,6 @@ s_vMgrRxAssocResponse(
 
     }
 
-#if 1
 #ifdef WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT
 //need clear flags related to Networkmanager
               pDevice->bwextstep0 = FALSE;
@@ -1065,7 +1061,6 @@ s_vMgrRxAssocResponse(
               pDevice->bwextstep3 = FALSE;
               pDevice->bWPASuppWextEnabled = FALSE;
 #endif
-#endif
 
 if(pMgmt->eCurrState == WMAC_STATE_ASSOC)
       timer_expire(pDevice->sTimerCommand, 0);
@@ -1705,7 +1700,8 @@ s_vMgrRxDeauthentication(
 	   pDevice->fWPA_Authened = FALSE;
             DBG_PRT(MSG_LEVEL_NOTICE, KERN_INFO  "AP deauthed me, reason=%d.\n", cpu_to_le16((*(sFrame.pwReason))));
             // TODO: update BSS list for specific BSSID if pre-authentication case
-            if (IS_ETH_ADDRESS_EQUAL(sFrame.pHdr->sA3.abyAddr3, pMgmt->abyCurrBSSID)) {
+	    if (!compare_ether_addr(sFrame.pHdr->sA3.abyAddr3,
+				    pMgmt->abyCurrBSSID)) {
                 if (pMgmt->eCurrState >= WMAC_STATE_AUTHPENDING) {
                     pMgmt->sNodeDBTable[0].bActive = FALSE;
                     pMgmt->eCurrMode = WMAC_MODE_STANDBY;
@@ -2471,11 +2467,8 @@ void vMgrCreateOwnIBSS(void *hDeviceContext,
     pDevice->uCurrRSSI = 0;
     pDevice->byCurrSQ = 0;
 
-//20080131-04,<Add> by Mike Liu
-#ifdef Adhoc_STA
     memcpy(pMgmt->abyDesireSSID,pMgmt->abyAdHocSSID,
                       ((PWLAN_IE_SSID)pMgmt->abyAdHocSSID)->len + WLAN_IEHDR_LEN);
-#endif
 
     memset(pMgmt->abyCurrSSID, 0, WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1);
     memcpy(pMgmt->abyCurrSSID,
@@ -3099,12 +3092,6 @@ s_vMgrSynchBSS (
   PSMgmtObject  pMgmt = &(pDevice->sMgmtObj);
   /* unsigned int ii, uSameBssidNum=0; */
 
-        //  for (ii = 0; ii < MAX_BSS_NUM; ii++) {
-          //   if (pMgmt->sBSSList[ii].bActive &&
-            //      IS_ETH_ADDRESS_EQUAL(pMgmt->sBSSList[ii].abyBSSID, pCurr->abyBSSID)) {
-             //       uSameBssidNum++;
-               //   }
-           // }
   //   if( uSameBssidNum>=2) {	 //we only check AP in hidden sssid  mode
         if ((pMgmt->eAuthenMode == WMAC_AUTH_WPAPSK) ||           //networkmanager 0.7.0 does not give the pairwise-key selsection,
              (pMgmt->eAuthenMode == WMAC_AUTH_WPA2PSK)) {         // so we need re-selsect it according to real pairwise-key info.
@@ -4795,21 +4782,21 @@ s_bCipherMatch (
             byMulticastCipher = KEY_CTL_INVALID;
         }
 
-        // check Pairwise Key Cipher
-        for(i=0;i<pBSSNode->wCSSPKCount;i++) {
-            if ((pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP40) ||
-                (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP104)) {
-                // this should not happen as defined 802.11i
-                byCipherMask |= 0x01;
-            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_TKIP) {
-                byCipherMask |= 0x02;
-            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_CCMP) {
-                byCipherMask |= 0x04;
-            } else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_USE_GROUP) {
-                // use group key only ignore all others
-                byCipherMask = 0;
-                i = pBSSNode->wCSSPKCount;
-            }
+	/* check Pairwise Key Cipher */
+	for (i = 0; i < pBSSNode->wCSSPKCount; i++) {
+		if ((pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP40) ||
+		    (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_WEP104)) {
+			/* this should not happen as defined 802.11i */
+			byCipherMask |= 0x01;
+		} else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_TKIP) {
+			byCipherMask |= 0x02;
+		} else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_CCMP) {
+			byCipherMask |= 0x04;
+		} else if (pBSSNode->abyCSSPK[i] == WLAN_11i_CSS_USE_GROUP) {
+			/* use group key only ignore all others */
+			byCipherMask = 0;
+			i = pBSSNode->wCSSPKCount;
+		}
         }
 
     } else if ((WLAN_GET_CAP_INFO_PRIVACY(pBSSNode->wCapInfo) != 0) &&
@@ -4828,17 +4815,17 @@ s_bCipherMatch (
             byMulticastCipher = KEY_CTL_INVALID;
         }
 
-        // check Pairwise Key Cipher
-        for(i=0;i<pBSSNode->wPKCount;i++) {
-            if (pBSSNode->abyPKType[i] == WPA_TKIP) {
-                byCipherMask |= 0x02;
-            } else if (pBSSNode->abyPKType[i] == WPA_AESCCMP) {
-                byCipherMask |= 0x04;
-            } else if (pBSSNode->abyPKType[i] == WPA_NONE) {
-                // use group key only ignore all others
-                byCipherMask = 0;
-                i = pBSSNode->wPKCount;
-            }
+	/* check Pairwise Key Cipher */
+	for (i = 0; i < pBSSNode->wPKCount; i++) {
+		if (pBSSNode->abyPKType[i] == WPA_TKIP) {
+			byCipherMask |= 0x02;
+		} else if (pBSSNode->abyPKType[i] == WPA_AESCCMP) {
+			byCipherMask |= 0x04;
+		} else if (pBSSNode->abyPKType[i] == WPA_NONE) {
+			/* use group key only ignore all others */
+			byCipherMask = 0;
+			i = pBSSNode->wPKCount;
+		}
         }
     }
 
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 1e5b916aea1..683840c0ac4 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -82,7 +82,7 @@
 
 /*---------------------  Export Types  ------------------------------*/
 //mike define: make timer  to expire after desired times
-#define timer_expire(timer,next_tick)   mod_timer(&timer, RUN_AT(next_tick))
+#define timer_expire(timer, next_tick) mod_timer(&timer, RUN_AT(next_tick))
 
 typedef void (*TimerFunction)(unsigned long);
 
@@ -259,9 +259,7 @@ typedef struct tagSMgmtObject
     // Operation state variables
     WMAC_CURRENT_MODE       eCurrMode;   // MAC current connection mode
     WMAC_BSS_STATE          eCurrState;  // MAC current BSS state
-    #ifdef SndEvt_ToAPI
     WMAC_BSS_STATE          eLastState;  // MAC last BSS state
-    #endif
 
     PKnownBSS               pCurrBSS;
     BYTE                    byCSSGK;
@@ -293,10 +291,7 @@ typedef struct tagSMgmtObject
     BYTE                    abyDesireBSSID[WLAN_BSSID_LEN];
 
 //restore BSS info for Ad-Hoc mode
-//20080131-05,<Add> by Mike Liu
-#ifdef Adhoc_STA
      BYTE                    abyAdHocSSID[WLAN_IEHDR_LEN + WLAN_SSID_MAXLEN + 1];
-#endif
 
     // Adhoc or AP configuration vars
     WORD                    wIBSSBeaconPeriod;
@@ -343,11 +338,11 @@ typedef struct tagSMgmtObject
     BOOL                    bRxBeaconInTBTTWake;
     BYTE                    abyPSTxMap[MAX_NODE_NUM + 1];
 
-    // managment command related
+    // management command related
     unsigned int                    uCmdBusy;
     unsigned int                    uCmdHostAPBusy;
 
-    // managment packet pool
+    // management packet pool
     PBYTE                   pbyMgmtPacketPool;
     BYTE                    byMgmtPacketPool[sizeof(STxMgmtPacket) + WLAN_A3FR_MAXLEN];
 
diff --git a/drivers/staging/vt6656/wpa.c b/drivers/staging/vt6656/wpa.c
index 1fa6c9b88ed..f492778ee8b 100644
--- a/drivers/staging/vt6656/wpa.c
+++ b/drivers/staging/vt6656/wpa.c
@@ -148,7 +148,8 @@ WPA_ParseRSN (
         {
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wPKCount: %d, sizeof(pBSSList->abyPKType): %zu\n", pRSN->wPKCount, sizeof(pBSSList->abyPKType));
-            for(i = 0; (i < pRSN->wPKCount) && (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
+	    for (i = 0; (i < pRSN->wPKCount) &&
+		   (j < sizeof(pBSSList->abyPKType)/sizeof(BYTE)); i++) {
                 if(pRSN->len >= 12+i*4+4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*i)
                     if ( !memcmp(pRSN->PKSList[i].abyOUI, abyOUI00, 4))
                         pBSSList->abyPKType[j++] = WPA_NONE;
@@ -180,7 +181,8 @@ WPA_ParseRSN (
             j = 0;
             DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"wAuthCount: %d, sizeof(pBSSList->abyAuthType): %zu\n",
                           pIE_RSN_Auth->wAuthCount, sizeof(pBSSList->abyAuthType));
-            for(i = 0; (i < pIE_RSN_Auth->wAuthCount) && (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
+	    for (i = 0; (i < pIE_RSN_Auth->wAuthCount) &&
+		   (j < sizeof(pBSSList->abyAuthType)/sizeof(BYTE)); i++) {
                 if(pRSN->len >= 14+4+(m+i)*4) { //oui1(4)+ver(2)+GKS(4)+PKSCnt(2)+PKS(4*m)+AKC(2)+AKS(4*i)
                     if ( !memcmp(pIE_RSN_Auth->AuthKSList[i].abyOUI, abyOUI01, 4))
                         pBSSList->abyAuthType[j++] = WPA_AUTH_IEEE802_1X;
diff --git a/drivers/staging/vt6656/wpa2.h b/drivers/staging/vt6656/wpa2.h
index 429a910a5c5..46c295905b4 100644
--- a/drivers/staging/vt6656/wpa2.h
+++ b/drivers/staging/vt6656/wpa2.h
@@ -58,21 +58,9 @@ typedef struct tagSPMKIDCache {
 
 /*---------------------  Export Functions  --------------------------*/
 
-void
-WPA2_ClearRSN (
-     PKnownBSS        pBSSNode
-    );
+void WPA2_ClearRSN(PKnownBSS pBSSNode);
+void WPA2vParseRSN(PKnownBSS pBSSNode, PWLAN_IE_RSN pRSN);
 
-void
-WPA2vParseRSN (
-     PKnownBSS        pBSSNode,
-     PWLAN_IE_RSN     pRSN
-    );
-
-unsigned int
-WPA2uSetIEs(
-	void *pMgmtHandle,
-     PWLAN_IE_RSN pRSNIEs
-    );
+unsigned int WPA2uSetIEs(void *pMgmtHandle, PWLAN_IE_RSN pRSNIEs);
 
 #endif /* __WPA2_H__ */
diff --git a/drivers/staging/vt6656/wpactl.c b/drivers/staging/vt6656/wpactl.c
index 961f583368a..b407ae536bf 100644
--- a/drivers/staging/vt6656/wpactl.c
+++ b/drivers/staging/vt6656/wpactl.c
@@ -186,7 +186,6 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
 		return wpa_release_wpadev(pDevice);
 }
 
-
 /*
  * Description:
  *      Set WPA algorithm & keys
@@ -349,9 +348,8 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
         return -EINVAL;
     }
 
-
-    if (IS_BROADCAST_ADDRESS(&param->addr[0]) || (param->addr == NULL)) {
-        // If IS_BROADCAST_ADDRESS, set the key as every key entry's group key.
+    if (is_broadcast_ether_addr(&param->addr[0]) || (param->addr == NULL)) {
+	/* if broadcast, set the key as every key entry's group key */
         DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "Groupe Key Assign.\n");
 
         if ((KeybSetAllGroupKey(pDevice,
@@ -404,7 +402,7 @@ int wpa_set_wpadev(PSDevice pDevice, int val)
 
         } else {
             // Key Table Full
-            if (IS_ETH_ADDRESS_EQUAL(&param->addr[0], pDevice->abyBSSID)) {
+	    if (!compare_ether_addr(&param->addr[0], pDevice->abyBSSID)) {
                 //DBG_PRN_WLAN03(("return NDIS_STATUS_INVALID_DATA -Key Table Full.2\n"));
                 return -EINVAL;
 
@@ -647,9 +645,9 @@ static int wpa_get_scan(PSDevice pDevice,
 
     for (ii = 0; ii < MAX_BSS_NUM; ii++) {
 
-         for(jj=0;jj<MAX_BSS_NUM-ii-1;jj++) {
+	for (jj = 0; jj < MAX_BSS_NUM - ii - 1; jj++) {
 
-           if((pMgmt->sBSSList[jj].bActive!=TRUE) ||
+		if ((pMgmt->sBSSList[jj].bActive != TRUE) ||
 
                 ((pMgmt->sBSSList[jj].uRSSI>pMgmt->sBSSList[jj+1].uRSSI) &&(pMgmt->sBSSList[jj+1].bActive!=FALSE))) {
 
diff --git a/drivers/staging/winbond/mac_structures.h b/drivers/staging/winbond/mac_structures.h
index 7441015cb18..415256f69c3 100644
--- a/drivers/staging/winbond/mac_structures.h
+++ b/drivers/staging/winbond/mac_structures.h
@@ -41,8 +41,10 @@
 #define DOT_11_MAC_HEADER_SIZE		24
 #define DOT_11_SNAP_SIZE			6
 #define DOT_11_DURATION_OFFSET		2
-#define DOT_11_SEQUENCE_OFFSET		22 /* Sequence control offset */
-#define DOT_11_TYPE_OFFSET			30 /* The start offset of 802.11 Frame// */
+/* Sequence control offset */
+#define DOT_11_SEQUENCE_OFFSET		22
+/* The start offset of 802.11 Frame// */
+#define DOT_11_TYPE_OFFSET			30
 #define DOT_11_DATA_OFFSET          24
 #define DOT_11_DA_OFFSET			4
 #define DOT_3_TYPE_ARP				0x80F3
@@ -98,28 +100,28 @@
 #define ELEMENT_ID_CF_PARAMETER_SET         4
 #define ELEMENT_ID_TIM                      5
 #define ELEMENT_ID_IBSS_PARAMETER_SET       6
-// 7~15 reserverd
+/* 7~15 reserverd */
 #define ELEMENT_ID_CHALLENGE_TEXT           16
-// 17~31 reserved for challenge text extension
-// 32~255 reserved
-//--  11G  --
+/* 17~31 reserved for challenge text extension */
+/* 32~255 reserved */
+/*--  11G  -- */
 #define ELEMENT_ID_ERP_INFORMATION			42
 #define ELEMENT_ID_EXTENDED_SUPPORTED_RATES 50
 
-//--  WPA  --
+/* --  WPA  -- */
 
 #define ELEMENT_ID_RSN_WPA					221
 #ifdef _WPA2_
 #define ELEMENT_ID_RSN_WPA2				    48
-#endif //endif WPA2
+#endif /* endif WPA2 */
 
 #define WLAN_MAX_PAIRWISE_CIPHER_SUITE_COUNT    ((u16) 6)
 #define WLAN_MAX_AUTH_KEY_MGT_SUITE_LIST_COUNT  ((u16) 2)
 
-//===================================================================
-//  Reason Code (Table 18): indicate the reason of DisAssoc, DeAuthen
-//  length of ReasonCode is 2 Octs.
-//===================================================================
+/* ===================================================================
+*  Reason Code (Table 18): indicate the reason of DisAssoc, DeAuthen
+*  length of ReasonCode is 2 Octs.
+* =================================================================== */
 #define REASON_REASERED             0
 #define REASON_UNSPECIDIED          1
 #define REASON_PREAUTH_INVALID      2
@@ -385,9 +387,11 @@ struct Extended_Supported_Rates_Element {
 #ifdef _WPA2_
 #define VERSION_WPA2            1
 #endif /* end def  _WPA2_ */
-#define OUI_WPA					0x00F25000	/* WPA2.0 OUI=00:50:F2, the MSB is reserved for suite type */
+/* WPA2.0 OUI=00:50:F2, the MSB is reserved for suite type */
+#define OUI_WPA					0x00F25000
 #ifdef _WPA2_
-#define OUI_WPA2				0x00AC0F00	/* for wpa2 change to 0x00ACOF04 by Ws 26/04/04 */
+/* for wpa2 change to 0x00ACOF04 by Ws 26/04/04 */
+#define OUI_WPA2				0x00AC0F00
 #endif /* end def _WPA2_ */
 
 #define OUI_WPA_ADDITIONAL		0x01
@@ -400,8 +404,8 @@ struct Extended_Supported_Rates_Element {
 
 #define WPA_OUI_BIG    ((u32) 0x01F25000)/* added by ws 09/23/04 */
 #define WPA_OUI_LITTLE  ((u32) 0x01F25001)/* added by ws 09/23/04 */
-
-#define WPA_WPS_OUI				cpu_to_le32(0x04F25000) /* 20061108 For WPS. It's little endian. Big endian is 0x0050F204 */
+/* 20061108 For WPS. It's little endian. Big endian is 0x0050F204 */
+#define WPA_WPS_OUI				cpu_to_le32(0x04F25000)
 
 /* -----WPA2----- */
 #ifdef _WPA2_
@@ -420,75 +424,65 @@ struct Extended_Supported_Rates_Element {
 #define OUI_CIPHER_CCMP				0x04
 #define OUI_CIPHER_WEP_104			0x05
 
-struct suite_selector
-{
-	union
-	{
+struct suite_selector{
+	union{
 		u8	Value[4];
-		struct _SUIT_
-		{
+		struct _SUIT_ {
 			u8	OUI[3];
 			u8	Type;
-		}SuitSelector;
+		} SuitSelector;
 	};
 };
 
-//--  WPA  --
-struct	RSN_Information_Element
-{
+/* --  WPA  -- */
+struct	RSN_Information_Element{
 	u8					Element_ID;
 	u8					Length;
-	struct suite_selector	OuiWPAAdditional; /* WPA version 2.0 additional field, and should be 00:50:F2:01 */
+ /* WPA version 2.0 additional field, and should be 00:50:F2:01 */
+	struct suite_selector	OuiWPAAdditional;
 	u16					Version;
 	struct suite_selector		GroupKeySuite;
 	u16					PairwiseKeySuiteCount;
 	struct suite_selector		PairwiseKeySuite[1];
-}__attribute__ ((packed));
-struct RSN_Auth_Sub_Information_Element
-{
+} __attribute__ ((packed));
+struct RSN_Auth_Sub_Information_Element {
 	u16				AuthKeyMngtSuiteCount;
 	struct suite_selector	AuthKeyMngtSuite[1];
-}__attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* --  WPA2  -- */
-struct RSN_Capability_Element
-{
-  union
-  {
+struct RSN_Capability_Element {
+  union {
 	u16	__attribute__ ((packed))	wValue;
     #ifdef _BIG_ENDIAN_	 /* 20060927 add by anson's endian */
-    struct _RSN_Capability
-    {
-    	u16   __attribute__ ((packed))  Reserved2 : 8; /* 20051201 */
-	u16   __attribute__ ((packed))  Reserved1 : 2;
-	u16   __attribute__ ((packed))  GTK_Replay_Counter : 2;
-	u16   __attribute__ ((packed))  PTK_Replay_Counter : 2;
-	u16   __attribute__ ((packed))  No_Pairwise : 1;
-        u16   __attribute__ ((packed))  Pre_Auth : 1;
-    }__attribute__ ((packed))  RSN_Capability;
+    struct _RSN_Capability {
+	u16   __attribute__ ((packed))  Reserved2:8; /* 20051201 */
+	u16   __attribute__ ((packed))  Reserved1:2;
+	u16   __attribute__ ((packed))  GTK_Replay_Counter:2;
+	u16   __attribute__ ((packed))  PTK_Replay_Counter:2;
+	u16   __attribute__ ((packed))  No_Pairwise:1;
+	u16   __attribute__ ((packed))  Pre_Auth:1;
+    } __attribute__ ((packed))  RSN_Capability;
     #else
-    struct _RSN_Capability
-    {
-        u16   __attribute__ ((packed))  Pre_Auth : 1;
-        u16   __attribute__ ((packed))  No_Pairwise : 1;
-        u16   __attribute__ ((packed))  PTK_Replay_Counter : 2;
-	    u16   __attribute__ ((packed))  GTK_Replay_Counter : 2;
-	    u16   __attribute__ ((packed))  Reserved1 : 2;
-	    u16   __attribute__ ((packed))  Reserved2 : 8; /* 20051201 */
-    }__attribute__ ((packed))  RSN_Capability;
+    struct _RSN_Capability {
+	u16   __attribute__ ((packed))  Pre_Auth:1;
+	u16   __attribute__ ((packed))  No_Pairwise:1;
+	u16   __attribute__ ((packed))  PTK_Replay_Counter:2;
+	u16   __attribute__ ((packed))  GTK_Replay_Counter:2;
+	u16   __attribute__ ((packed))  Reserved1:2;
+	u16   __attribute__ ((packed))  Reserved2:8; /* 20051201 */
+    } __attribute__ ((packed))  RSN_Capability;
     #endif
 
-  }__attribute__ ((packed)) ;
-}__attribute__ ((packed)) ;
+  } __attribute__ ((packed)) ;
+} __attribute__ ((packed)) ;
 
 #ifdef _WPA2_
-struct pmkid
-{
+struct pmkid {
   u8 pValue[16];
 };
 
-struct	WPA2_RSN_Information_Element
-{
+struct	WPA2_RSN_Information_Element {
 	u8					Element_ID;
 	u8					Length;
 	u16					Version;
@@ -496,29 +490,28 @@ struct	WPA2_RSN_Information_Element
 	u16					PairwiseKeySuiteCount;
 	struct suite_selector		PairwiseKeySuite[1];
 
-}__attribute__ ((packed));
+} __attribute__ ((packed));
 
-struct WPA2_RSN_Auth_Sub_Information_Element
-{
+struct WPA2_RSN_Auth_Sub_Information_Element {
 	u16				AuthKeyMngtSuiteCount;
 	struct suite_selector	AuthKeyMngtSuite[1];
-}__attribute__ ((packed));
+} __attribute__ ((packed));
 
 
-struct PMKID_Information_Element
-{
+struct PMKID_Information_Element {
 	u16				PMKID_Count;
 	struct pmkid pmkid[16];
-}__attribute__ ((packed));
+} __attribute__ ((packed));
 
 #endif /* enddef _WPA2_ */
 /*============================================================
 // MAC Frame structure (different type) and subfield structure
 //============================================================*/
-struct MAC_frame_control
-{
-    u8    mac_frame_info; /* a combination of the [Protocol Version, Control Type, Control Subtype]*/
-    #ifdef _BIG_ENDIAN_ /* 20060927 add by anson's endian */
+struct MAC_frame_control {
+/* a combination of the [Protocol Version, Control Type, Control Subtype]*/
+    u8    mac_frame_info;
+/* 20060927 add by anson's endian */
+    #ifdef _BIG_ENDIAN_
     u8    order:1;
     u8    WEP:1;
     u8    more_data:1;
@@ -540,7 +533,8 @@ struct MAC_frame_control
 } __attribute__ ((packed));
 
 struct Management_Frame {
-    struct MAC_frame_control frame_control; /* 2B, ToDS,FromDS,MoreFrag,MoreData,Order=0 */
+/* 2B, ToDS,FromDS,MoreFrag,MoreData,Order=0 */
+    struct MAC_frame_control frame_control;
     u16		duration;
     u8		DA[MAC_ADDR_LENGTH];			/* Addr1 */
     u8		SA[MAC_ADDR_LENGTH];			/* Addr2 */
@@ -552,7 +546,8 @@ struct Management_Frame {
 
 /* SW-MAC don't Tx/Rx Control-Frame, HW-MAC do it. */
 struct Control_Frame {
-    struct MAC_frame_control frame_control; /* ToDS,FromDS,MoreFrag,Retry,MoreData,WEP,Order=0 */
+/* ToDS,FromDS,MoreFrag,Retry,MoreData,WEP,Order=0 */
+    struct MAC_frame_control frame_control;
     u16		duration;
     u8		RA[MAC_ADDR_LENGTH];
     u8		TA[MAC_ADDR_LENGTH];
@@ -627,8 +622,9 @@ struct Authentication_Frame_Body {
     u16    algorithmNumber;
     u16    sequenceNumber;
     u16    statusCode;
-    /* NB: don't include ChallengeText in this structure
-	// struct Challenge_Text_Element sChallengeTextElement; // wkchen added */
+	/* NB: don't include ChallengeText in this structure
+	// struct Challenge_Text_Element sChallengeTextElement;
+	// wkchen added */
 } __attribute__ ((packed));
 
 
diff --git a/drivers/staging/winbond/phy_calibration.c b/drivers/staging/winbond/phy_calibration.c
index 78935865df1..5c1f05392db 100644
--- a/drivers/staging/winbond/phy_calibration.c
+++ b/drivers/staging/winbond/phy_calibration.c
@@ -19,23 +19,25 @@
 
 /****************** LOCAL CONSTANT AND MACRO SECTION ************************/
 #define LOOP_TIMES      20
-#define US              1000//MICROSECOND
+#define US              1000/* MICROSECOND*/
 
 #define AG_CONST        0.6072529350
 #define FIXED(X)        ((s32)((X) * 32768.0))
 #define DEG2RAD(X)      0.017453 * (X)
 
-static const s32 Angles[] =
-{
-    FIXED(DEG2RAD(45.0)),    FIXED(DEG2RAD(26.565)),  FIXED(DEG2RAD(14.0362)),
-    FIXED(DEG2RAD(7.12502)), FIXED(DEG2RAD(3.57633)), FIXED(DEG2RAD(1.78991)),
-    FIXED(DEG2RAD(0.895174)),FIXED(DEG2RAD(0.447614)),FIXED(DEG2RAD(0.223811)),
-    FIXED(DEG2RAD(0.111906)),FIXED(DEG2RAD(0.055953)),FIXED(DEG2RAD(0.027977))
+static const s32 Angles[] = {
+    FIXED(DEG2RAD(45.0)),     FIXED(DEG2RAD(26.565)),   FIXED(DEG2RAD(14.0362)),
+    FIXED(DEG2RAD(7.12502)),  FIXED(DEG2RAD(3.57633)),  FIXED(DEG2RAD(1.78991)),
+    FIXED(DEG2RAD(0.895174)), FIXED(DEG2RAD(0.447614)), FIXED(DEG2RAD(0.223811)),
+    FIXED(DEG2RAD(0.111906)), FIXED(DEG2RAD(0.055953)), FIXED(DEG2RAD(0.027977))
 };
 
 /****************** LOCAL FUNCTION DECLARATION SECTION **********************/
-//void    _phy_rf_write_delay(struct hw_data *phw_data);
-//void    phy_init_rf(struct hw_data *phw_data);
+
+/*
+ * void    _phy_rf_write_delay(struct hw_data *phw_data);
+ * void    phy_init_rf(struct hw_data *phw_data);
+ */
 
 /****************** FUNCTION DEFINITION SECTION *****************************/
 
@@ -46,9 +48,7 @@ s32 _s13_to_s32(u32 data)
     val = (data & 0x0FFF);
 
     if ((data & BIT(12)) != 0)
-    {
         val |= 0xFFFFF000;
-    }
 
     return ((s32) val);
 }
@@ -58,13 +58,9 @@ u32 _s32_to_s13(s32 data)
     u32     val;
 
     if (data > 4095)
-    {
         data = 4095;
-    }
     else if (data < -4096)
-    {
         data = -4096;
-    }
 
     val = data & 0x1FFF;
 
@@ -79,9 +75,7 @@ s32 _s4_to_s32(u32 data)
     val = (data & 0x0007);
 
     if ((data & BIT(3)) != 0)
-    {
         val |= 0xFFFFFFF8;
-    }
 
     return val;
 }
@@ -91,13 +85,9 @@ u32 _s32_to_s4(s32 data)
     u32     val;
 
     if (data > 7)
-    {
         data = 7;
-    }
     else if (data < -8)
-    {
         data = -8;
-    }
 
     val = data & 0x000F;
 
@@ -112,9 +102,7 @@ s32 _s5_to_s32(u32 data)
     val = (data & 0x000F);
 
     if ((data & BIT(4)) != 0)
-    {
         val |= 0xFFFFFFF0;
-    }
 
     return val;
 }
@@ -124,13 +112,9 @@ u32 _s32_to_s5(s32 data)
     u32     val;
 
     if (data > 15)
-    {
         data = 15;
-    }
     else if (data < -16)
-    {
         data = -16;
-    }
 
     val = data & 0x001F;
 
@@ -145,9 +129,7 @@ s32 _s6_to_s32(u32 data)
     val = (data & 0x001F);
 
     if ((data & BIT(5)) != 0)
-    {
         val |= 0xFFFFFFE0;
-    }
 
     return val;
 }
@@ -157,13 +139,9 @@ u32 _s32_to_s6(s32 data)
     u32     val;
 
     if (data > 31)
-    {
         data = 31;
-    }
     else if (data < -32)
-    {
         data = -32;
-    }
 
     val = data & 0x003F;
 
@@ -178,9 +156,7 @@ s32 _s9_to_s32(u32 data)
     val = data & 0x00FF;
 
     if ((data & BIT(8)) != 0)
-    {
         val |= 0xFFFFFF00;
-    }
 
     return val;
 }
@@ -190,13 +166,9 @@ u32 _s32_to_s9(s32 data)
     u32     val;
 
     if (data > 255)
-    {
         data = 255;
-    }
     else if (data < -256)
-    {
         data = -256;
-    }
 
     val = data & 0x01FF;
 
@@ -207,21 +179,19 @@ u32 _s32_to_s9(s32 data)
 s32 _floor(s32 n)
 {
     if (n > 0)
-    {
-        n += 5;
-    }
+	n += 5;
     else
-    {
         n -= 5;
-    }
 
     return (n/10);
 }
 
 /****************************************************************************/
-// The following code is sqare-root function.
-// sqsum is the input and the output is sq_rt;
-// The maximum of sqsum = 2^27 -1;
+/*
+ * The following code is sqare-root function.
+ * sqsum is the input and the output is sq_rt;
+ * The maximum of sqsum = 2^27 -1;
+ */
 u32 _sqrt(u32 sqsum)
 {
     u32     sq_rt;
@@ -232,18 +202,17 @@ u32 _sqrt(u32 sqsum)
     int     step;
 
     g4 =  sqsum / 100000000;
-    g3 = (sqsum - g4*100000000) /1000000;
-    g2 = (sqsum - g4*100000000 - g3*1000000) /10000;
-    g1 = (sqsum - g4*100000000 - g3*1000000 - g2*10000) /100;
+    g3 = (sqsum - g4*100000000) / 1000000;
+    g2 = (sqsum - g4*100000000 - g3*1000000) / 10000;
+    g1 = (sqsum - g4*100000000 - g3*1000000 - g2*10000) / 100;
     g0 = (sqsum - g4*100000000 - g3*1000000 - g2*10000 - g1*100);
 
     next = g4;
     step = 0;
     seed = 0;
-    while (((seed+1)*(step+1)) <= next)
-    {
-    	step++;
-    	seed++;
+    while (((seed+1)*(step+1)) <= next) {
+        step++;
+        seed++;
     }
 
     sq_rt = seed * 10000;
@@ -251,20 +220,18 @@ u32 _sqrt(u32 sqsum)
 
     step = 0;
     seed = 2 * seed * 10;
-    while (((seed+1)*(step+1)) <= next)
-    {
+    while (((seed+1)*(step+1)) <= next) {
         step++;
-    	seed++;
+        seed++;
     }
 
     sq_rt = sq_rt + step * 1000;
     next = (next - seed * step) * 100 + g2;
     seed = (seed + step) * 10;
     step = 0;
-    while (((seed+1)*(step+1)) <= next)
-    {
+    while (((seed+1)*(step+1)) <= next) {
         step++;
-    	seed++;
+        seed++;
     }
 
     sq_rt = sq_rt + step * 100;
@@ -272,21 +239,19 @@ u32 _sqrt(u32 sqsum)
     seed = (seed + step) * 10;
     step = 0;
 
-    while (((seed+1)*(step+1)) <= next)
-    {
+    while (((seed+1)*(step+1)) <= next) {
         step++;
-    	seed++;
+        seed++;
     }
 
     sq_rt = sq_rt + step * 10;
-    next = (next - seed* step) * 100 + g0;
+    next = (next - seed * step) * 100 + g0;
     seed = (seed + step) * 10;
     step = 0;
 
-    while (((seed+1)*(step+1)) <= next)
-    {
+    while (((seed+1)*(step+1)) <= next) {
         step++;
-    	seed++;
+        seed++;
     }
 
     sq_rt = sq_rt + step;
@@ -300,38 +265,31 @@ void _sin_cos(s32 angle, s32 *sin, s32 *cos)
     s32 X, Y, TargetAngle, CurrAngle;
     unsigned    Step;
 
-    X=FIXED(AG_CONST);      // AG_CONST * cos(0)
-    Y=0;                    // AG_CONST * sin(0)
-    TargetAngle=abs(angle);
-    CurrAngle=0;
+    X = FIXED(AG_CONST);      /* AG_CONST * cos(0) */
+    Y = 0;                    /* AG_CONST * sin(0) */
+    TargetAngle = abs(angle);
+    CurrAngle = 0;
 
-    for (Step=0; Step < 12; Step++)
-    {
+    for (Step = 0; Step < 12; Step++) {
 	s32 NewX;
 
-        if(TargetAngle > CurrAngle)
-        {
-            NewX=X - (Y >> Step);
-            Y=(X >> Step) + Y;
-            X=NewX;
+        if (TargetAngle > CurrAngle) {
+            NewX = X - (Y >> Step);
+            Y = (X >> Step) + Y;
+            X = NewX;
             CurrAngle += Angles[Step];
-        }
-        else
-        {
-            NewX=X + (Y >> Step);
-            Y=-(X >> Step) + Y;
-            X=NewX;
+        } else {
+            NewX = X + (Y >> Step);
+            Y = -(X >> Step) + Y;
+            X = NewX;
             CurrAngle -= Angles[Step];
         }
     }
 
-    if (angle > 0)
-    {
+    if (angle > 0) {
         *cos = X;
         *sin = Y;
-    }
-    else
-    {
+    } else {
         *cos = X;
         *sin = -Y;
     }
@@ -343,7 +301,7 @@ static unsigned char hal_get_dxx_reg(struct hw_data *pHwData, u16 number, u32 *
 		number += 0x1000;
 	return Wb35Reg_ReadSync(pHwData, number, pValue);
 }
-#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C )
+#define hw_get_dxx_reg(_A, _B, _C) hal_get_dxx_reg(_A, _B, (u32 *)_C)
 
 static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 value)
 {
@@ -354,7 +312,7 @@ static unsigned char hal_set_dxx_reg(struct hw_data *pHwData, u16 number, u32 va
 	ret = Wb35Reg_WriteSync(pHwData, number, value);
 	return ret;
 }
-#define hw_set_dxx_reg( _A, _B, _C ) hal_set_dxx_reg( _A, _B, (u32)_C )
+#define hw_set_dxx_reg(_A, _B, _C) hal_set_dxx_reg(_A, _B, (u32)_C)
 
 
 void _reset_rx_cal(struct hw_data *phw_data)
@@ -363,25 +321,20 @@ void _reset_rx_cal(struct hw_data *phw_data)
 
 	hw_get_dxx_reg(phw_data, 0x54, &val);
 
-	if (phw_data->revision == 0x2002) // 1st-cut
-	{
+	if (phw_data->revision == 0x2002) /* 1st-cut */
 		val &= 0xFFFF0000;
-	}
-	else // 2nd-cut
-	{
+	else /* 2nd-cut */
 		val &= 0x000003FF;
-	}
 
 	hw_set_dxx_reg(phw_data, 0x54, val);
 }
 
 
-// ************for winbond calibration*********
-//
+/**************for winbond calibration*********/
+
+
 
-//
-//
-// *********************************************
+/**********************************************/
 void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequency)
 {
     u32     reg_agc_ctrl3;
@@ -392,35 +345,31 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
     PHY_DEBUG(("[CAL] -> [1]_rxadc_dc_offset_cancellation()\n"));
     phy_init_rf(phw_data);
 
-    // set calibration channel
-    if( (RF_WB_242 == phw_data->phy_type) ||
-		(RF_WB_242_1 == phw_data->phy_type) ) // 20060619.5 Add
-    {
-        if ((frequency >= 2412) && (frequency <= 2484))
-        {
-            // w89rf242 change frequency to 2390Mhz
+    /* set calibration channel */
+    if ((RF_WB_242 == phw_data->phy_type) ||
+		(RF_WB_242_1 == phw_data->phy_type)) /* 20060619.5 Add */{
+        if ((frequency >= 2412) && (frequency <= 2484)) {
+            /* w89rf242 change frequency to 2390Mhz */
             PHY_DEBUG(("[CAL] W89RF242/11G/Channel=2390Mhz\n"));
 			phy_set_rf_data(phw_data, 3, (3<<24)|0x025586);
 
         }
-    }
-    else
-	{
+    } else {
 
 	}
 
-	// reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel
+	/* reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel */
 	hw_get_dxx_reg(phw_data, 0x5C, &val);
 	val &= ~(0x03FF);
 	hw_set_dxx_reg(phw_data, 0x5C, val);
 
-	// reset the TX and RX IQ calibration data
+	/* reset the TX and RX IQ calibration data */
 	hw_set_dxx_reg(phw_data, 0x3C, 0);
 	hw_set_dxx_reg(phw_data, 0x54, 0);
 
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); // IQ_Alpha Changed
+	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
 
-	// a. Disable AGC
+	/* a. Disable AGC */
 	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
 	reg_agc_ctrl3 &= ~BIT(2);
 	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
@@ -430,7 +379,7 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
 	val |= MASK_AGC_FIX_GAIN;
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
 
-	// b. Turn off BB RX
+	/* b. Turn off BB RX */
 	hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, &reg_a_acq_ctrl);
 	reg_a_acq_ctrl |= MASK_AMER_OFF_REG;
 	hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl);
@@ -439,9 +388,9 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
 	reg_b_acq_ctrl |= MASK_BMER_OFF_REG;
 	hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl);
 
-	// c. Make sure MAC is in receiving mode
-	// d. Turn ON ADC calibration
-	//    - ADC calibrator is triggered by this signal rising from 0 to 1
+	/* c. Make sure MAC is in receiving mode
+	 * d. Turn ON ADC calibration
+	 *    - ADC calibrator is triggered by this signal rising from 0 to 1 */
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
 	val &= ~MASK_ADC_DC_CAL_STR;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
@@ -449,7 +398,7 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
 	val |= MASK_ADC_DC_CAL_STR;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
 
-	// e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]"
+	/* e. The result are shown in "adc_dc_cal_i[8:0] and adc_dc_cal_q[8:0]" */
 #ifdef _DEBUG
 	hw_get_dxx_reg(phw_data, REG_OFFSET_READ, &val);
 	PHY_DEBUG(("[CAL]    REG_OFFSET_READ = 0x%08X\n", val));
@@ -464,23 +413,23 @@ void _rxadc_dc_offset_cancellation_winbond(struct hw_data *phw_data, u32 frequen
 	val &= ~MASK_ADC_DC_CAL_STR;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, val);
 
-	// f. Turn on BB RX
-	//hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, &reg_a_acq_ctrl);
+	/* f. Turn on BB RX */
+	/* hw_get_dxx_reg(phw_data, REG_A_ACQ_CTRL, &reg_a_acq_ctrl); */
 	reg_a_acq_ctrl &= ~MASK_AMER_OFF_REG;
 	hw_set_dxx_reg(phw_data, REG_A_ACQ_CTRL, reg_a_acq_ctrl);
 
-	//hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, &reg_b_acq_ctrl);
+	/* hw_get_dxx_reg(phw_data, REG_B_ACQ_CTRL, &reg_b_acq_ctrl); */
 	reg_b_acq_ctrl &= ~MASK_BMER_OFF_REG;
 	hw_set_dxx_reg(phw_data, REG_B_ACQ_CTRL, reg_b_acq_ctrl);
 
-	// g. Enable AGC
-	//hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val);
+	/* g. Enable AGC */
+	/* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */
 	reg_agc_ctrl3 |= BIT(2);
 	reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
 }
 
-////////////////////////////////////////////////////////
+/****************************************************************/
 void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 {
 	u32     reg_agc_ctrl3;
@@ -497,22 +446,22 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 
 	PHY_DEBUG(("[CAL] -> [2]_txidac_dc_offset_cancellation()\n"));
 
-	// a. Set to "TX calibration mode"
+	/* a. Set to "TX calibration mode" */
 
-	//0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits
+	/* 0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
 	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	//0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit
+	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
 	phy_set_rf_data(phw_data, 11, (11<<24)|0x1901D6);
-	//0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized
+	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
 	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C48A);
-    //0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized
+        /* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
 	phy_set_rf_data(phw_data, 6, (6<<24)|0x06890C);
-	//0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode
+	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
 	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
 
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); // IQ_Alpha Changed
+	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
 
-	// a. Disable AGC
+	/* a. Disable AGC */
 	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
 	reg_agc_ctrl3 &= ~BIT(2);
 	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
@@ -522,19 +471,19 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 	val |= MASK_AGC_FIX_GAIN;
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
 
-	// b. set iqcal_mode[1:0] to 0x2 and set iqcal_tone[3:2] to 0
+	/* b. set iqcal_mode[1:0] to 0x2 and set iqcal_tone[3:2] to 0 */
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
 
 	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
 	reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
 
-	// mode=2, tone=0
-	//reg_mode_ctrl |= (MASK_CALIB_START|2);
+	/* mode=2, tone=0 */
+	/* reg_mode_ctrl |= (MASK_CALIB_START|2); */
 
-	// mode=2, tone=1
-	//reg_mode_ctrl |= (MASK_CALIB_START|2|(1<<2));
+	/* mode=2, tone=1 */
+	/* reg_mode_ctrl |= (MASK_CALIB_START|2|(1<<2)); */
 
-	// mode=2, tone=2
+	/* mode=2, tone=2 */
 	reg_mode_ctrl |= (MASK_CALIB_START|2|(2<<2));
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
@@ -542,12 +491,10 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 	hw_get_dxx_reg(phw_data, 0x5C, &reg_dc_cancel);
 	PHY_DEBUG(("[CAL]    DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
 
-	for (loop = 0; loop < LOOP_TIMES; loop++)
-	{
+	for (loop = 0; loop < LOOP_TIMES; loop++) {
 		PHY_DEBUG(("[CAL] [%d.] ==================================\n", loop));
 
-		// c.
-		// reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel
+		/* c. reset cancel_dc_i[9:5] and cancel_dc_q[4:0] in register DC_Cancel */
 		reg_dc_cancel &= ~(0x03FF);
 		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
@@ -562,7 +509,7 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 		PHY_DEBUG(("[CAL]    mag_0=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
 				   mag_0, iqcal_image_i, iqcal_image_q));
 
-		// d.
+		/* d. */
 		reg_dc_cancel |= (1 << CANCEL_DC_I_SHIFT);
 		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
@@ -577,18 +524,12 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 		PHY_DEBUG(("[CAL]    mag_1=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
 				   mag_1, iqcal_image_i, iqcal_image_q));
 
-		// e. Calculate the correct DC offset cancellation value for I
+		/* e. Calculate the correct DC offset cancellation value for I */
 		if (mag_0 != mag_1)
-		{
 			fix_cancel_dc_i = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
-		}
-		else
-		{
+		else {
 			if (mag_0 == mag_1)
-			{
 				PHY_DEBUG(("[CAL]   ***** mag_0 = mag_1 !!\n"));
-			}
-
 			fix_cancel_dc_i = 0;
 		}
 
@@ -596,12 +537,10 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 				   fix_cancel_dc_i, _s32_to_s5(fix_cancel_dc_i)));
 
 		if ((abs(mag_1-mag_0)*6) > mag_0)
-		{
 			break;
-		}
 	}
 
-	if ( loop >= 19 )
+	if (loop >= 19)
 	   fix_cancel_dc_i = 0;
 
 	reg_dc_cancel &= ~(0x03FF);
@@ -609,13 +548,13 @@ void _txidac_dc_offset_cancellation_winbond(struct hw_data *phw_data)
 	hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
 	PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 
-	// g.
+	/* g. */
 	reg_mode_ctrl &= ~MASK_CALIB_START;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 }
 
-///////////////////////////////////////////////////////
+/*****************************************************/
 void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 {
 	u32     reg_agc_ctrl3;
@@ -631,20 +570,20 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 	int     loop;
 
 	PHY_DEBUG(("[CAL] -> [3]_txqdac_dc_offset_cacellation()\n"));
-	//0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits
+	/*0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
 	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	//0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit
+	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
 	phy_set_rf_data(phw_data, 11, (11<<24)|0x1901D6);
-	//0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized
+	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
 	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C48A);
-    //0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized
+        /* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
 	phy_set_rf_data(phw_data, 6, (6<<24)|0x06890C);
-	//0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode
+	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
 	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
 
-	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); // IQ_Alpha Changed
+	hw_set_dxx_reg(phw_data, 0x58, 0x30303030); /* IQ_Alpha Changed */
 
-	// a. Disable AGC
+	/* a. Disable AGC */
 	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
 	reg_agc_ctrl3 &= ~BIT(2);
 	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
@@ -654,11 +593,11 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 	val |= MASK_AGC_FIX_GAIN;
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL5, val);
 
-	// a. set iqcal_mode[1:0] to 0x3 and set iqcal_tone[3:2] to 0
+	/* a. set iqcal_mode[1:0] to 0x3 and set iqcal_tone[3:2] to 0 */
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
 
-	//reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
+	/* reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE); */
 	reg_mode_ctrl &= ~(MASK_IQCAL_MODE);
 	reg_mode_ctrl |= (MASK_CALIB_START|3);
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
@@ -667,12 +606,10 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 	hw_get_dxx_reg(phw_data, 0x5C, &reg_dc_cancel);
 	PHY_DEBUG(("[CAL]    DC_CANCEL (read) = 0x%08X\n", reg_dc_cancel));
 
-	for (loop = 0; loop < LOOP_TIMES; loop++)
-	{
+	for (loop = 0; loop < LOOP_TIMES; loop++) {
 		PHY_DEBUG(("[CAL] [%d.] ==================================\n", loop));
 
-		// b.
-		// reset cancel_dc_q[4:0] in register DC_Cancel
+		/* b. reset cancel_dc_q[4:0] in register DC_Cancel */
 		reg_dc_cancel &= ~(0x001F);
 		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
@@ -687,7 +624,7 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 		PHY_DEBUG(("[CAL]    mag_0=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
 				   mag_0, iqcal_image_i, iqcal_image_q));
 
-		// c.
+		/* c. */
 		reg_dc_cancel |= (1 << CANCEL_DC_Q_SHIFT);
 		PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 		hw_set_dxx_reg(phw_data, 0x5C, reg_dc_cancel);
@@ -702,18 +639,12 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 		PHY_DEBUG(("[CAL]    mag_1=%d (iqcal_image_i=%d, iqcal_image_q=%d)\n",
 				   mag_1, iqcal_image_i, iqcal_image_q));
 
-		// d. Calculate the correct DC offset cancellation value for I
+		/* d. Calculate the correct DC offset cancellation value for I */
 		if (mag_0 != mag_1)
-		{
 			fix_cancel_dc_q = (mag_0*10000) / (mag_0*10000 - mag_1*10000);
-		}
-		else
-		{
+		else {
 			if (mag_0 == mag_1)
-			{
 				PHY_DEBUG(("[CAL]   ***** mag_0 = mag_1 !!\n"));
-			}
-
 			fix_cancel_dc_q = 0;
 		}
 
@@ -721,12 +652,10 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 				   fix_cancel_dc_q, _s32_to_s5(fix_cancel_dc_q)));
 
 		if ((abs(mag_1-mag_0)*6) > mag_0)
-		{
 			break;
-		}
 	}
 
-	if ( loop >= 19 )
+	if (loop >= 19)
 	   fix_cancel_dc_q = 0;
 
 	reg_dc_cancel &= ~(0x001F);
@@ -735,13 +664,13 @@ void _txqdac_dc_offset_cacellation_winbond(struct hw_data *phw_data)
 	PHY_DEBUG(("[CAL]    DC_CANCEL (write) = 0x%08X\n", reg_dc_cancel));
 
 
-	// f.
+	/* f. */
 	reg_mode_ctrl &= ~MASK_CALIB_START;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 }
 
-//20060612.1.a 20060718.1 Modify
+/* 20060612.1.a 20060718.1 Modify */
 u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 						   s32 a_2_threshold,
 						   s32 b_2_threshold)
@@ -765,7 +694,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 	s32     temp1, temp2;
 	u32     val;
 	u16     loop;
-	s32     iqcal_tone_i_avg,iqcal_tone_q_avg;
+	s32     iqcal_tone_i_avg, iqcal_tone_q_avg;
 	u8      verify_count;
 	int capture_time;
 
@@ -780,18 +709,18 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 
 	loop = LOOP_TIMES;
 
-	while (loop > 0)
-	{
+	while (loop > 0) {
 		PHY_DEBUG(("[CAL] [%d.] <_tx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
 
-		iqcal_tone_i_avg=0;
-		iqcal_tone_q_avg=0;
-		if( !hw_set_dxx_reg(phw_data, 0x3C, 0x00) ) // 20060718.1 modify
+		iqcal_tone_i_avg = 0;
+		iqcal_tone_q_avg = 0;
+		if (!hw_set_dxx_reg(phw_data, 0x3C, 0x00)) /* 20060718.1 modify */
 			return 0;
-		for(capture_time=0;capture_time<10;capture_time++)
-		{
-			// a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
-			//    enable "IQ alibration Mode II"
+		for (capture_time = 0; capture_time < 10; capture_time++) {
+			/*
+			 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
+			 *    enable "IQ alibration Mode II"
+			 */
 			reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
 			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
 			reg_mode_ctrl |= (MASK_CALIB_START|0x02);
@@ -799,7 +728,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-			// b.
+			/* b. */
 			hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
 			PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
 
@@ -813,21 +742,23 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			iq_mag_0_tx = (s32) _sqrt(sqsum);
 			PHY_DEBUG(("[CAL]    ** iq_mag_0_tx=%d\n", iq_mag_0_tx));
 
-			// c. Set "calib_start" to 0x0
+			/* c. Set "calib_start" to 0x0 */
 			reg_mode_ctrl &= ~MASK_CALIB_START;
 			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-			// d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
-			//    enable "IQ alibration Mode II"
-			//hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val);
+			/*
+			 * d. Set iqcal_mode[1:0] to 0x3 and set "calib_start" to 0x1 to
+			 *    enable "IQ alibration Mode II"
+			 */
+			/* hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &val); */
 			hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
 			reg_mode_ctrl &= ~MASK_IQCAL_MODE;
 			reg_mode_ctrl |= (MASK_CALIB_START|0x03);
 			hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 			PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-			// e.
+			/* e. */
 			hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
 			PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
 
@@ -835,14 +766,11 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			iqcal_tone_q = _s13_to_s32((val & 0x03FFE000) >> 13);
 			PHY_DEBUG(("[CAL]    ** iqcal_tone_i = %d, iqcal_tone_q = %d\n",
 			iqcal_tone_i, iqcal_tone_q));
-			if( capture_time == 0)
-			{
+			if (capture_time == 0)
 				continue;
-			}
-			else
-			{
-				iqcal_tone_i_avg=( iqcal_tone_i_avg*(capture_time-1) +iqcal_tone_i)/capture_time;
-				iqcal_tone_q_avg=( iqcal_tone_q_avg*(capture_time-1) +iqcal_tone_q)/capture_time;
+			else {
+				iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time;
+				iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time;
 			}
 		}
 
@@ -857,11 +785,10 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 		PHY_DEBUG(("[CAL]    ** rot_i_b = %d, rot_q_b = %d\n",
 				   rot_i_b, rot_q_b));
 
-		// f.
+		/* f. */
 		divisor = ((iq_mag_0_tx * iq_mag_0_tx * 2)/1024 - rot_i_b) * 2;
 
-		if (divisor == 0)
-		{
+		if (divisor == 0) {
 			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n"));
 			PHY_DEBUG(("[CAL] ** divisor=0 to calculate EPS and THETA !!\n"));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
@@ -876,18 +803,16 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 		phw_data->iq_rsdl_gain_tx_d2 = a_2;
 		phw_data->iq_rsdl_phase_tx_d2 = b_2;
 
-		//if ((abs(a_2) < 150) && (abs(b_2) < 100))
-		//if ((abs(a_2) < 200) && (abs(b_2) < 200))
-		if ((abs(a_2) < a_2_threshold) && (abs(b_2) < b_2_threshold))
-		{
+		/* if ((abs(a_2) < 150) && (abs(b_2) < 100)) */
+		/* if ((abs(a_2) < 200) && (abs(b_2) < 200)) */
+		if ((abs(a_2) < a_2_threshold) && (abs(b_2) < b_2_threshold)) {
 			verify_count++;
 
 			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n"));
 			PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
 
-			if (verify_count > 2)
-			{
+			if (verify_count > 2) {
 				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION (EPS,THETA) OK !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
@@ -895,37 +820,29 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			}
 
 			continue;
-		}
-		else
-		{
+		} else
 			verify_count = 0;
-		}
 
 		_sin_cos(b_2, &sin_b, &cos_b);
 		_sin_cos(b_2*2, &sin_2b, &cos_2b);
 		PHY_DEBUG(("[CAL]    ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b));
 		PHY_DEBUG(("[CAL]    ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b));
 
-		if (cos_2b == 0)
-		{
+		if (cos_2b == 0) {
 			PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> ERROR *******\n"));
 			PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n"));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
 			break;
 		}
 
-		// 1280 * 32768 = 41943040
+		/* 1280 * 32768 = 41943040 */
 		temp1 = (41943040/cos_2b)*cos_b;
 
-		//temp2 = (41943040/cos_2b)*sin_b*(-1);
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		/* temp2 = (41943040/cos_2b)*sin_b*(-1); */
+		if (phw_data->revision == 0x2002) /* 1st-cut */
 			temp2 = (41943040/cos_2b)*sin_b*(-1);
-		}
-		else // 2nd-cut
-		{
+		else /* 2nd-cut */
 			temp2 = (41943040*4/cos_2b)*sin_b*(-1);
-		}
 
 		tx_cal_flt_b[0] = _floor(temp1/(32768+a_2));
 		tx_cal_flt_b[1] = _floor(temp2/(32768+a_2));
@@ -937,37 +854,34 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 		PHY_DEBUG(("[CAL]       tx_cal_flt_b[3] = %d\n", tx_cal_flt_b[3]));
 
 		tx_cal[2] = tx_cal_flt_b[2];
-		tx_cal[2] = tx_cal[2] +3;
+		tx_cal[2] = tx_cal[2] + 3;
 		tx_cal[1] = tx_cal[2];
 		tx_cal[3] = tx_cal_flt_b[3] - 128;
-		tx_cal[0] = -tx_cal[3]+1;
+		tx_cal[0] = -tx_cal[3] + 1;
 
 		PHY_DEBUG(("[CAL]       tx_cal[0] = %d\n", tx_cal[0]));
 		PHY_DEBUG(("[CAL]       tx_cal[1] = %d\n", tx_cal[1]));
 		PHY_DEBUG(("[CAL]       tx_cal[2] = %d\n", tx_cal[2]));
 		PHY_DEBUG(("[CAL]       tx_cal[3] = %d\n", tx_cal[3]));
 
-		//if ((tx_cal[0] == 0) && (tx_cal[1] == 0) &&
-		//    (tx_cal[2] == 0) && (tx_cal[3] == 0))
-		//{
-		//    PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n"));
-		//    PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION COMPLETE !!\n"));
-		//    PHY_DEBUG(("[CAL] ******************************************\n"));
-		//    return 0;
-		//}
-
-		// g.
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		/* if ((tx_cal[0] == 0) && (tx_cal[1] == 0) &&
+		      (tx_cal[2] == 0) && (tx_cal[3] == 0))
+		  { */
+		/*    PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *************\n"));
+		 *    PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION COMPLETE !!\n"));
+		 *    PHY_DEBUG(("[CAL] ******************************************\n"));
+		 *    return 0;
+		  } */
+
+		/* g. */
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
 			hw_get_dxx_reg(phw_data, 0x54, &val);
 			PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
 			tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28);
 			tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24);
 			tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20);
 			tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16);
-		}
-		else // 2nd-cut
-		{
+		} else /* 2nd-cut */{
 			hw_get_dxx_reg(phw_data, 0x3C, &val);
 			PHY_DEBUG(("[CAL]    ** 0x3C = 0x%08X\n", val));
 			tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
@@ -982,22 +896,17 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 		PHY_DEBUG(("[CAL]       tx_cal_reg[2] = %d\n", tx_cal_reg[2]));
 		PHY_DEBUG(("[CAL]       tx_cal_reg[3] = %d\n", tx_cal_reg[3]));
 
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
-			if (((tx_cal_reg[0]==7) || (tx_cal_reg[0]==(-8))) &&
-				((tx_cal_reg[3]==7) || (tx_cal_reg[3]==(-8))))
-			{
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
+			if (((tx_cal_reg[0] == 7) || (tx_cal_reg[0] == (-8))) &&
+				((tx_cal_reg[3] == 7) || (tx_cal_reg[3] == (-8)))) {
 				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
 				break;
 			}
-		}
-		else // 2nd-cut
-		{
-			if (((tx_cal_reg[0]==31) || (tx_cal_reg[0]==(-32))) &&
-				((tx_cal_reg[3]==31) || (tx_cal_reg[3]==(-32))))
-			{
+		} else /* 2nd-cut */{
+			if (((tx_cal_reg[0] == 31) || (tx_cal_reg[0] == (-32))) &&
+				((tx_cal_reg[3] == 31) || (tx_cal_reg[3] == (-32)))) {
 				PHY_DEBUG(("[CAL] ** <_tx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION SATUATION !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
@@ -1014,8 +923,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 		PHY_DEBUG(("[CAL]       apply tx_cal[2] = %d\n", tx_cal[2]));
 		PHY_DEBUG(("[CAL]       apply tx_cal[3] = %d\n", tx_cal[3]));
 
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
 			val &= 0x0000FFFF;
 			val |= ((_s32_to_s4(tx_cal[0]) << 28)|
 					(_s32_to_s4(tx_cal[1]) << 24)|
@@ -1024,9 +932,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			hw_set_dxx_reg(phw_data, 0x54, val);
 			PHY_DEBUG(("[CAL]    ** CALIB_DATA = 0x%08X\n", val));
 			return 0;
-		}
-		else // 2nd-cut
-		{
+		} else /* 2nd-cut */{
 			val &= 0x000003FF;
 			val |= ((_s32_to_s5(tx_cal[0]) << 27)|
 					(_s32_to_s6(tx_cal[1]) << 21)|
@@ -1037,7 +943,7 @@ u8 _tx_iq_calibration_loop_winbond(struct hw_data *phw_data,
 			return 0;
 		}
 
-		// i. Set "calib_start" to 0x0
+		/* i. Set "calib_start" to 0x0 */
 		reg_mode_ctrl &= ~MASK_CALIB_START;
 		hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
@@ -1061,26 +967,26 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 
 	PHY_DEBUG(("[CAL] -> [4]_tx_iq_calibration()\n"));
 
-	//0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits
+	/* 0x01 0xEE3FC2  ; 3B8FF  ; Calibration (6a). enable TX IQ calibration loop circuits */
 	phy_set_rf_data(phw_data, 1, (1<<24)|0xEE3FC2);
-	//0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit
-	phy_set_rf_data(phw_data, 11, (11<<24)|0x19BDD6); // 20060612.1.a 0x1905D6);
-	//0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized
-	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C60A); //0x24C60A (high temperature)
-    //0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized
-	phy_set_rf_data(phw_data, 6, (6<<24)|0x34880C); // 20060612.1.a 0x06890C);
-	//0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode
+	/* 0x0B 0x1905D6  ; 06417  ; Calibration (6b). enable TX I/Q cal loop squaring circuit */
+	phy_set_rf_data(phw_data, 11, (11<<24)|0x19BDD6); /* 20060612.1.a 0x1905D6); */
+	/* 0x05 0x24C60A  ; 09318  ; Calibration (6c). setting TX-VGA gain: TXGCH=2 & GPK=110 --> to be optimized */
+	phy_set_rf_data(phw_data, 5, (5<<24)|0x24C60A); /* 0x24C60A (high temperature) */
+        /* 0x06 0x06880C  ; 01A20  ; Calibration (6d). RXGCH=00; RXGCL=100 000 (RXVGA=32) --> to be optimized */
+	phy_set_rf_data(phw_data, 6, (6<<24)|0x34880C); /* 20060612.1.a 0x06890C); */
+	/* 0x00 0xFDF1C0  ; 3F7C7  ; Calibration (6e). turn on IQ imbalance/Test mode */
 	phy_set_rf_data(phw_data, 0, (0<<24)|0xFDF1C0);
-	//; [BB-chip]: Calibration (6f).Send test pattern
-	//; [BB-chip]: Calibration (6g). Search RXGCL optimal value
-	//; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table
-	//phy_set_rf_data(phw_data, 3, (3<<24)|0x025586);
+	/* ; [BB-chip]: Calibration (6f).Send test pattern */
+	/* ; [BB-chip]: Calibration (6g). Search RXGCL optimal value */
+	/* ; [BB-chip]: Calibration (6h). Caculate TX-path IQ imbalance and setting TX path IQ compensation table */
+	/* phy_set_rf_data(phw_data, 3, (3<<24)|0x025586); */
 
-	msleep(30); // 20060612.1.a 30ms delay. Add the follow 2 lines
-	//To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750
-	adjust_TXVGA_for_iq_mag( phw_data );
+	msleep(30); /* 20060612.1.a 30ms delay. Add the follow 2 lines */
+	/* To adjust TXVGA to fit iq_mag_0 range from 1250 ~ 1750 */
+	adjust_TXVGA_for_iq_mag(phw_data);
 
-	// a. Disable AGC
+	/* a. Disable AGC */
 	hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &reg_agc_ctrl3);
 	reg_agc_ctrl3 &= ~BIT(2);
 	reg_agc_ctrl3 |= (MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
@@ -1092,16 +998,12 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 
 	result = _tx_iq_calibration_loop_winbond(phw_data, 150, 100);
 
-	if (result > 0)
-	{
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+	if (result > 0) {
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
 			hw_get_dxx_reg(phw_data, 0x54, &val);
 			val &= 0x0000FFFF;
 			hw_set_dxx_reg(phw_data, 0x54, val);
-		}
-		else // 2nd-cut
-		{
+		} else /* 2nd-cut*/{
 			hw_get_dxx_reg(phw_data, 0x3C, &val);
 			val &= 0x000003FF;
 			hw_set_dxx_reg(phw_data, 0x3C, val);
@@ -1109,32 +1011,24 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 
 		result = _tx_iq_calibration_loop_winbond(phw_data, 300, 200);
 
-		if (result > 0)
-		{
-			if (phw_data->revision == 0x2002) // 1st-cut
-			{
+		if (result > 0) {
+			if (phw_data->revision == 0x2002) /* 1st-cut */{
 				hw_get_dxx_reg(phw_data, 0x54, &val);
 				val &= 0x0000FFFF;
 				hw_set_dxx_reg(phw_data, 0x54, val);
-			}
-			else // 2nd-cut
-			{
+			} else /* 2nd-cut*/{
 				hw_get_dxx_reg(phw_data, 0x3C, &val);
 				val &= 0x000003FF;
 				hw_set_dxx_reg(phw_data, 0x3C, val);
 			}
 
 			result = _tx_iq_calibration_loop_winbond(phw_data, 500, 400);
-			if (result > 0)
-			{
-				if (phw_data->revision == 0x2002) // 1st-cut
-				{
+			if (result > 0) {
+				if (phw_data->revision == 0x2002) /* 1st-cut */{
 					hw_get_dxx_reg(phw_data, 0x54, &val);
 					val &= 0x0000FFFF;
 					hw_set_dxx_reg(phw_data, 0x54, val);
-				}
-				else // 2nd-cut
-				{
+				} else /* 2nd-cut */{
 					hw_get_dxx_reg(phw_data, 0x3C, &val);
 					val &= 0x000003FF;
 					hw_set_dxx_reg(phw_data, 0x3C, val);
@@ -1143,20 +1037,16 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 
 				result = _tx_iq_calibration_loop_winbond(phw_data, 700, 500);
 
-				if (result > 0)
-				{
+				if (result > 0) {
 					PHY_DEBUG(("[CAL] ** <_tx_iq_calibration> **************\n"));
 					PHY_DEBUG(("[CAL] ** TX_IQ_CALIBRATION FAILURE !!\n"));
 					PHY_DEBUG(("[CAL] **************************************\n"));
 
-					if (phw_data->revision == 0x2002) // 1st-cut
-					{
+					if (phw_data->revision == 0x2002) /* 1st-cut */{
 						hw_get_dxx_reg(phw_data, 0x54, &val);
 						val &= 0x0000FFFF;
 						hw_set_dxx_reg(phw_data, 0x54, val);
-					}
-					else // 2nd-cut
-					{
+					} else /* 2nd-cut */{
 						hw_get_dxx_reg(phw_data, 0x3C, &val);
 						val &= 0x000003FF;
 						hw_set_dxx_reg(phw_data, 0x3C, val);
@@ -1166,30 +1056,27 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 		}
 	}
 
-	// i. Set "calib_start" to 0x0
+	/* i. Set "calib_start" to 0x0 */
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
 	reg_mode_ctrl &= ~MASK_CALIB_START;
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-	// g. Enable AGC
-	//hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val);
+	/* g. Enable AGC */
+	/* hw_get_dxx_reg(phw_data, REG_AGC_CTRL3, &val); */
 	reg_agc_ctrl3 |= BIT(2);
 	reg_agc_ctrl3 &= ~(MASK_LNA_FIX_GAIN|MASK_AGC_FIX);
 	hw_set_dxx_reg(phw_data, REG_AGC_CTRL3, reg_agc_ctrl3);
 
 #ifdef _DEBUG
-	if (phw_data->revision == 0x2002) // 1st-cut
-	{
+	if (phw_data->revision == 0x2002) /* 1st-cut */{
 		hw_get_dxx_reg(phw_data, 0x54, &val);
 		PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
 		tx_cal_reg[0] = _s4_to_s32((val & 0xF0000000) >> 28);
 		tx_cal_reg[1] = _s4_to_s32((val & 0x0F000000) >> 24);
 		tx_cal_reg[2] = _s4_to_s32((val & 0x00F00000) >> 20);
 		tx_cal_reg[3] = _s4_to_s32((val & 0x000F0000) >> 16);
-	}
-	else // 2nd-cut
-	{
+	} else /* 2nd-cut */ {
 		hw_get_dxx_reg(phw_data, 0x3C, &val);
 		PHY_DEBUG(("[CAL]    ** 0x3C = 0x%08X\n", val));
 		tx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
@@ -1206,11 +1093,13 @@ void _tx_iq_calibration_winbond(struct hw_data *phw_data)
 #endif
 
 
-	// for test - BEN
-	// RF Control Override
+	/*
+	 * for test - BEN
+	 * RF Control Override
+	 */
 }
 
-/////////////////////////////////////////////////////////////////////////////////////////
+/*****************************************************/
 u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 frequency)
 {
 	u32     reg_mode_ctrl;
@@ -1236,51 +1125,49 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 	u32     pwr_image;
 	u8      verify_count;
 
-	s32     iqcal_tone_i_avg,iqcal_tone_q_avg;
-	s32     iqcal_image_i_avg,iqcal_image_q_avg;
-	u16		capture_time;
+	s32     iqcal_tone_i_avg, iqcal_tone_q_avg;
+	s32     iqcal_image_i_avg, iqcal_image_q_avg;
+	u16	capture_time;
 
 	PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration_loop()\n"));
 	PHY_DEBUG(("[CAL] ** factor = %d\n", factor));
 
 
-// RF Control Override
+/* RF Control Override */
 	hw_get_cxx_reg(phw_data, 0x80, &val);
 	val |= BIT(19);
 	hw_set_cxx_reg(phw_data, 0x80, val);
 
-// RF_Ctrl
+/* RF_Ctrl */
 	hw_get_cxx_reg(phw_data, 0xE4, &val);
 	val |= BIT(0);
 	hw_set_cxx_reg(phw_data, 0xE4, val);
 	PHY_DEBUG(("[CAL] ** RF_CTRL(0xE4) = 0x%08X", val));
 
-	hw_set_dxx_reg(phw_data, 0x58, 0x44444444); // IQ_Alpha
+	hw_set_dxx_reg(phw_data, 0x58, 0x44444444); /* IQ_Alpha */
 
-	// b.
+	/* b. */
 
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
 
 	verify_count = 0;
 
-	//for (loop = 0; loop < 1; loop++)
-	//for (loop = 0; loop < LOOP_TIMES; loop++)
+	/* for (loop = 0; loop < 1; loop++) */
+	/* for (loop = 0; loop < LOOP_TIMES; loop++) */
 	loop = LOOP_TIMES;
-	while (loop > 0)
-	{
+	while (loop > 0) {
 		PHY_DEBUG(("[CAL] [%d.] <_rx_iq_calibration_loop>\n", (LOOP_TIMES-loop+1)));
-		iqcal_tone_i_avg=0;
-		iqcal_tone_q_avg=0;
-		iqcal_image_i_avg=0;
-		iqcal_image_q_avg=0;
-		capture_time=0;
-
-		for(capture_time=0; capture_time<10; capture_time++)
-		{
-		// i. Set "calib_start" to 0x0
+		iqcal_tone_i_avg = 0;
+		iqcal_tone_q_avg = 0;
+		iqcal_image_i_avg = 0;
+		iqcal_image_q_avg = 0;
+		capture_time = 0;
+
+		for (capture_time = 0; capture_time < 10; capture_time++) {
+		/* i. Set "calib_start" to 0x0 */
 		reg_mode_ctrl &= ~MASK_CALIB_START;
-		if( !hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl) )//20060718.1 modify
+		if (!hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl))/*20060718.1 modify */
 			return 0;
 		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
@@ -1289,7 +1176,7 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-		// c.
+		/* c. */
 		hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
 		PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
 
@@ -1305,16 +1192,13 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		iqcal_image_q = _s13_to_s32((val & 0x03FFE000) >> 13);
 		PHY_DEBUG(("[CAL]    ** iqcal_image_i = %d, iqcal_image_q = %d\n",
 				   iqcal_image_i, iqcal_image_q));
-			if( capture_time == 0)
-			{
+			if (capture_time == 0)
 				continue;
-			}
-			else
-			{
-				iqcal_image_i_avg=( iqcal_image_i_avg*(capture_time-1) +iqcal_image_i)/capture_time;
-				iqcal_image_q_avg=( iqcal_image_q_avg*(capture_time-1) +iqcal_image_q)/capture_time;
-				iqcal_tone_i_avg=( iqcal_tone_i_avg*(capture_time-1) +iqcal_tone_i)/capture_time;
-				iqcal_tone_q_avg=( iqcal_tone_q_avg*(capture_time-1) +iqcal_tone_q)/capture_time;
+			else {
+				iqcal_image_i_avg = (iqcal_image_i_avg*(capture_time-1) + iqcal_image_i)/capture_time;
+				iqcal_image_q_avg = (iqcal_image_q_avg*(capture_time-1) + iqcal_image_q)/capture_time;
+				iqcal_tone_i_avg = (iqcal_tone_i_avg*(capture_time-1) + iqcal_tone_i)/capture_time;
+				iqcal_tone_q_avg = (iqcal_tone_q_avg*(capture_time-1) + iqcal_tone_q)/capture_time;
 			}
 		}
 
@@ -1324,7 +1208,7 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		iqcal_tone_i = iqcal_tone_i_avg;
 		iqcal_tone_q = iqcal_tone_q_avg;
 
-		// d.
+		/* d. */
 		rot_tone_i_b = (iqcal_tone_i * iqcal_tone_i +
 						iqcal_tone_q * iqcal_tone_q) / 1024;
 		rot_tone_q_b = (iqcal_tone_i * iqcal_tone_q * (-1) +
@@ -1339,9 +1223,8 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		PHY_DEBUG(("[CAL]    ** rot_image_i_b = %d\n", rot_image_i_b));
 		PHY_DEBUG(("[CAL]    ** rot_image_q_b = %d\n", rot_image_q_b));
 
-		// f.
-		if (rot_tone_i_b == 0)
-		{
+		/* f. */
+		if (rot_tone_i_b == 0) {
 			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n"));
 			PHY_DEBUG(("[CAL] ** rot_tone_i_b=0 to calculate EPS and THETA !!\n"));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
@@ -1363,26 +1246,21 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		PHY_DEBUG(("[CAL]    ** sin(b/2)=%d, cos(b/2)=%d\n", sin_b, cos_b));
 		PHY_DEBUG(("[CAL]    ** sin(b)=%d, cos(b)=%d\n", sin_2b, cos_2b));
 
-		if (cos_2b == 0)
-		{
+		if (cos_2b == 0) {
 			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> ERROR *******\n"));
 			PHY_DEBUG(("[CAL] ** cos(b)=0 !!\n"));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
 			break;
 		}
 
-		// 1280 * 32768 = 41943040
+		/* 1280 * 32768 = 41943040 */
 		temp1 = (41943040/cos_2b)*cos_b;
 
-		//temp2 = (41943040/cos_2b)*sin_b*(-1);
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		/* temp2 = (41943040/cos_2b)*sin_b*(-1); */
+		if (phw_data->revision == 0x2002)/* 1st-cut */
 			temp2 = (41943040/cos_2b)*sin_b*(-1);
-		}
-		else // 2nd-cut
-		{
+		else/* 2nd-cut */
 			temp2 = (41943040*4/cos_2b)*sin_b*(-1);
-		}
 
 		rx_cal_flt_b[0] = _floor(temp1/(32768+a_2));
 		rx_cal_flt_b[1] = _floor(temp2/(32768-a_2));
@@ -1403,23 +1281,21 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		PHY_DEBUG(("[CAL]       rx_cal[2] = %d\n", rx_cal[2]));
 		PHY_DEBUG(("[CAL]       rx_cal[3] = %d\n", rx_cal[3]));
 
-		// e.
+		/* e. */
 		pwr_tone = (iqcal_tone_i*iqcal_tone_i + iqcal_tone_q*iqcal_tone_q);
 		pwr_image = (iqcal_image_i*iqcal_image_i + iqcal_image_q*iqcal_image_q)*factor;
 
 		PHY_DEBUG(("[CAL]    ** pwr_tone  = %d\n", pwr_tone));
 		PHY_DEBUG(("[CAL]    ** pwr_image  = %d\n", pwr_image));
 
-		if (pwr_tone > pwr_image)
-		{
+		if (pwr_tone > pwr_image) {
 			verify_count++;
 
 			PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *************\n"));
 			PHY_DEBUG(("[CAL] ** VERIFY OK # %d !!\n", verify_count));
 			PHY_DEBUG(("[CAL] ******************************************\n"));
 
-			if (verify_count > 2)
-			{
+			if (verify_count > 2) {
 				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION OK !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
@@ -1428,19 +1304,16 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 
 			continue;
 		}
-		// g.
+		/* g. */
 		hw_get_dxx_reg(phw_data, 0x54, &val);
 		PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
 
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
 			rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12);
 			rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >>  8);
 			rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >>  4);
 			rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F));
-		}
-		else // 2nd-cut
-		{
+		} else /* 2nd-cut */{
 			rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
 			rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
 			rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
@@ -1452,22 +1325,17 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		PHY_DEBUG(("[CAL]       rx_cal_reg[2] = %d\n", rx_cal_reg[2]));
 		PHY_DEBUG(("[CAL]       rx_cal_reg[3] = %d\n", rx_cal_reg[3]));
 
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
-			if (((rx_cal_reg[0]==7) || (rx_cal_reg[0]==(-8))) &&
-				((rx_cal_reg[3]==7) || (rx_cal_reg[3]==(-8))))
-			{
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
+			if (((rx_cal_reg[0] == 7) || (rx_cal_reg[0] == (-8))) &&
+				((rx_cal_reg[3] == 7) || (rx_cal_reg[3] == (-8)))) {
 				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
 				break;
 			}
-		}
-		else // 2nd-cut
-		{
-			if (((rx_cal_reg[0]==31) || (rx_cal_reg[0]==(-32))) &&
-				((rx_cal_reg[3]==31) || (rx_cal_reg[3]==(-32))))
-			{
+		} else /* 2nd-cut */{
+			if (((rx_cal_reg[0] == 31) || (rx_cal_reg[0] == (-32))) &&
+				((rx_cal_reg[3] == 31) || (rx_cal_reg[3] == (-32)))) {
 				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration_loop> *********\n"));
 				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION SATUATION !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
@@ -1485,17 +1353,14 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 		PHY_DEBUG(("[CAL]       apply rx_cal[3] = %d\n", rx_cal[3]));
 
 		hw_get_dxx_reg(phw_data, 0x54, &val);
-		if (phw_data->revision == 0x2002) // 1st-cut
-		{
+		if (phw_data->revision == 0x2002) /* 1st-cut */{
 			val &= 0x0000FFFF;
 			val |= ((_s32_to_s4(rx_cal[0]) << 12)|
 					(_s32_to_s4(rx_cal[1]) <<  8)|
 					(_s32_to_s4(rx_cal[2]) <<  4)|
 					(_s32_to_s4(rx_cal[3])));
 			hw_set_dxx_reg(phw_data, 0x54, val);
-		}
-		else // 2nd-cut
-		{
+		} else /* 2nd-cut */{
 			val &= 0x000003FF;
 			val |= ((_s32_to_s5(rx_cal[0]) << 27)|
 					(_s32_to_s6(rx_cal[1]) << 21)|
@@ -1503,7 +1368,7 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 					(_s32_to_s5(rx_cal[3]) << 10));
 			hw_set_dxx_reg(phw_data, 0x54, val);
 
-			if( loop == 3 )
+			if (loop == 3)
 			return 0;
 		}
 		PHY_DEBUG(("[CAL]    ** CALIB_DATA = 0x%08X\n", val));
@@ -1514,12 +1379,12 @@ u8 _rx_iq_calibration_loop_winbond(struct hw_data *phw_data, u16 factor, u32 fre
 	return 1;
 }
 
-//////////////////////////////////////////////////////////
+/*************************************************/
 
-//////////////////////////////////////////////////////////////////////////
+/***************************************************************/
 void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 {
-// figo 20050523 marked thsi flag for can't compile for relesase
+/* figo 20050523 marked this flag for can't compile for relesase */
 #ifdef _DEBUG
 	s32     rx_cal_reg[4];
 	u32     val;
@@ -1528,37 +1393,34 @@ void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 	u8      result;
 
 	PHY_DEBUG(("[CAL] -> [5]_rx_iq_calibration()\n"));
-// a. Set RFIC to "RX calibration mode"
-	//; ----- Calibration (7). RX path IQ imbalance calibration loop
-	//	0x01 0xFFBFC2  ; 3FEFF  ; Calibration (7a). enable RX IQ calibration loop circuits
+/* a. Set RFIC to "RX calibration mode" */
+	/* ; ----- Calibration (7). RX path IQ imbalance calibration loop */
+	/*	0x01 0xFFBFC2  ; 3FEFF  ; Calibration (7a). enable RX IQ calibration loop circuits */
 	phy_set_rf_data(phw_data, 1, (1<<24)|0xEFBFC2);
-	//	0x0B 0x1A01D6  ; 06817  ; Calibration (7b). enable RX I/Q cal loop SW1 circuit
+	/*	0x0B 0x1A01D6  ; 06817  ; Calibration (7b). enable RX I/Q cal loop SW1 circuits */
 	phy_set_rf_data(phw_data, 11, (11<<24)|0x1A05D6);
-	//0x05 0x24848A  ; 09212  ; Calibration (7c). setting TX-VGA gain (TXGCH) to 2 --> to be optimized
-	phy_set_rf_data(phw_data, 5, (5<<24)| phw_data->txvga_setting_for_cal);
-	//0x06 0x06840C  ; 01A10  ; Calibration (7d). RXGCH=00; RXGCL=010 000 (RXVGA) --> to be optimized
+	/* 0x05 0x24848A  ; 09212  ; Calibration (7c). setting TX-VGA gain (TXGCH) to 2 --> to be optimized */
+	phy_set_rf_data(phw_data, 5, (5<<24) | phw_data->txvga_setting_for_cal);
+	/* 0x06 0x06840C  ; 01A10  ; Calibration (7d). RXGCH=00; RXGCL=010 000 (RXVGA) --> to be optimized */
 	phy_set_rf_data(phw_data, 6, (6<<24)|0x06834C);
-	//0x00 0xFFF1C0  ; 3F7C7  ; Calibration (7e). turn on IQ imbalance/Test mode
+	/* 0x00 0xFFF1C0  ; 3F7C7  ; Calibration (7e). turn on IQ imbalance/Test mode */
 	phy_set_rf_data(phw_data, 0, (0<<24)|0xFFF1C0);
 
-	//  ; [BB-chip]: Calibration (7f). Send test pattern
-	//	; [BB-chip]: Calibration (7g). Search RXGCL optimal value
-	//	; [BB-chip]: Calibration (7h). Caculate RX-path IQ imbalance and setting RX path IQ compensation table
+	/*  ; [BB-chip]: Calibration (7f). Send test pattern */
+	/*	; [BB-chip]: Calibration (7g). Search RXGCL optimal value */
+	/*	; [BB-chip]: Calibration (7h). Caculate RX-path IQ imbalance and setting RX path IQ compensation table */
 
 	result = _rx_iq_calibration_loop_winbond(phw_data, 12589, frequency);
 
-	if (result > 0)
-	{
+	if (result > 0) {
 		_reset_rx_cal(phw_data);
 		result = _rx_iq_calibration_loop_winbond(phw_data, 7943, frequency);
 
-		if (result > 0)
-		{
+		if (result > 0) {
 			_reset_rx_cal(phw_data);
 			result = _rx_iq_calibration_loop_winbond(phw_data, 5011, frequency);
 
-			if (result > 0)
-			{
+			if (result > 0) {
 				PHY_DEBUG(("[CAL] ** <_rx_iq_calibration> **************\n"));
 				PHY_DEBUG(("[CAL] ** RX_IQ_CALIBRATION FAILURE !!\n"));
 				PHY_DEBUG(("[CAL] **************************************\n"));
@@ -1571,15 +1433,12 @@ void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 	hw_get_dxx_reg(phw_data, 0x54, &val);
 	PHY_DEBUG(("[CAL]    ** 0x54 = 0x%08X\n", val));
 
-	if (phw_data->revision == 0x2002) // 1st-cut
-	{
+	if (phw_data->revision == 0x2002) /* 1st-cut */{
 		rx_cal_reg[0] = _s4_to_s32((val & 0x0000F000) >> 12);
 		rx_cal_reg[1] = _s4_to_s32((val & 0x00000F00) >>  8);
 		rx_cal_reg[2] = _s4_to_s32((val & 0x000000F0) >>  4);
 		rx_cal_reg[3] = _s4_to_s32((val & 0x0000000F));
-	}
-	else // 2nd-cut
-	{
+	} else /* 2nd-cut */{
 		rx_cal_reg[0] = _s5_to_s32((val & 0xF8000000) >> 27);
 		rx_cal_reg[1] = _s6_to_s32((val & 0x07E00000) >> 21);
 		rx_cal_reg[2] = _s6_to_s32((val & 0x001F8000) >> 15);
@@ -1594,7 +1453,7 @@ void _rx_iq_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 
 }
 
-////////////////////////////////////////////////////////////////////////
+/*******************************************************/
 void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 {
 	u32     reg_mode_ctrl;
@@ -1602,7 +1461,7 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 
 	PHY_DEBUG(("[CAL] -> phy_calibration_winbond()\n"));
 
-	// 20040701 1.1.25.1000 kevin
+	/* 20040701 1.1.25.1000 kevin */
 	hw_get_cxx_reg(phw_data, 0x80, &mac_ctrl);
 	hw_get_cxx_reg(phw_data, 0xE4, &rf_ctrl);
 	hw_get_dxx_reg(phw_data, 0x58, &iq_alpha);
@@ -1610,72 +1469,71 @@ void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency)
 
 
 	_rxadc_dc_offset_cancellation_winbond(phw_data, frequency);
-	//_txidac_dc_offset_cancellation_winbond(phw_data);
-	//_txqdac_dc_offset_cacellation_winbond(phw_data);
+	/* _txidac_dc_offset_cancellation_winbond(phw_data); */
+	/* _txqdac_dc_offset_cacellation_winbond(phw_data); */
 
 	_tx_iq_calibration_winbond(phw_data);
 	_rx_iq_calibration_winbond(phw_data, frequency);
 
-	//------------------------------------------------------------------------
+	/*********************************************************************/
 	hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl);
-	reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE|MASK_CALIB_START); // set when finish
+	reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE|MASK_CALIB_START); /* set when finish */
 	hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 	PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-	// i. Set RFIC to "Normal mode"
+	/* i. Set RFIC to "Normal mode" */
 	hw_set_cxx_reg(phw_data, 0x80, mac_ctrl);
 	hw_set_cxx_reg(phw_data, 0xE4, rf_ctrl);
 	hw_set_dxx_reg(phw_data, 0x58, iq_alpha);
 
 
-	//------------------------------------------------------------------------
+	/*********************************************************************/
 	phy_init_rf(phw_data);
 
 }
 
-//===========================
-void phy_set_rf_data(  struct hw_data * pHwData,  u32 index,  u32 value )
+/******************/
+void phy_set_rf_data(struct hw_data *pHwData, u32 index, u32 value)
 {
-   u32 ltmp=0;
-
-    switch( pHwData->phy_type )
-	{
-		case RF_MAXIM_2825:
-		case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
-			ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( value, 18 );
-			break;
-
-		case RF_MAXIM_2827:
-			ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( value, 18 );
-			break;
-
-		case RF_MAXIM_2828:
-			ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( value, 18 );
-			break;
-
-		case RF_MAXIM_2829:
-			ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( value, 18 );
-			break;
-
-		case RF_AIROHA_2230:
-		case RF_AIROHA_2230S: // 20060420 Add this
-			ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( value, 20 );
-			break;
-
-		case RF_AIROHA_7230:
-			ltmp = (1 << 31) | (0 << 30) | (24 << 24) | (value&0xffffff);
-			break;
-
-		case RF_WB_242:
-		case RF_WB_242_1: // 20060619.5 Add
-			ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( value, 24 );
-			break;
-	}
+   u32 ltmp = 0;
+
+    switch (pHwData->phy_type) {
+    case RF_MAXIM_2825:
+    case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
+            ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
+            break;
+
+    case RF_MAXIM_2827:
+            ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
+	    break;
+
+    case RF_MAXIM_2828:
+	    ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
+	    break;
+
+    case RF_MAXIM_2829:
+	    ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(value, 18);
+	    break;
+
+    case RF_AIROHA_2230:
+    case RF_AIROHA_2230S: /* 20060420 Add this */
+	    ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(value, 20);
+	    break;
+
+    case RF_AIROHA_7230:
+	    ltmp = (1 << 31) | (0 << 30) | (24 << 24) | (value&0xffffff);
+	    break;
+
+    case RF_WB_242:
+    case RF_WB_242_1:/* 20060619.5 Add */
+	    ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(value, 24);
+	    break;
+    }
 
-	Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
+	Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
 }
 
-// 20060717 modify as Bruce's mail
+/* 20060717 modify as Bruce's mail */
 unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
 {
 	int init_txvga = 0;
@@ -1685,26 +1543,27 @@ unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
 	s32     iqcal_tone_q0;
 	u32     sqsum;
 	s32     iq_mag_0_tx;
-	u8		reg_state;
-	int		current_txvga;
+	u8	reg_state;
+	int	current_txvga;
 
 
 	reg_state = 0;
-	for( init_txvga=0; init_txvga<10; init_txvga++)
-	{
-		current_txvga = ( 0x24C40A|(init_txvga<<6) );
-		phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga) );
+	for (init_txvga = 0; init_txvga < 10; init_txvga++) {
+		current_txvga = (0x24C40A|(init_txvga<<6));
+		phy_set_rf_data(phw_data, 5, ((5<<24)|current_txvga));
 		phw_data->txvga_setting_for_cal = current_txvga;
 
-		msleep(30); // 20060612.1.a
+		msleep(30);/* 20060612.1.a */
 
-		if( !hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl) ) // 20060718.1 modify
+		if (!hw_get_dxx_reg(phw_data, REG_MODE_CTRL, &reg_mode_ctrl))/* 20060718.1 modify */
 			return false;
 
 		PHY_DEBUG(("[CAL]    MODE_CTRL (read) = 0x%08X\n", reg_mode_ctrl));
 
-		// a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
-		//    enable "IQ alibration Mode II"
+		/*
+		 * a. Set iqcal_mode[1:0] to 0x2 and set "calib_start" to 0x1 to
+		 *    enable "IQ alibration Mode II"
+		 */
 		reg_mode_ctrl &= ~(MASK_IQCAL_TONE_SEL|MASK_IQCAL_MODE);
 		reg_mode_ctrl &= ~MASK_IQCAL_MODE;
 		reg_mode_ctrl |= (MASK_CALIB_START|0x02);
@@ -1712,15 +1571,15 @@ unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
 		hw_set_dxx_reg(phw_data, REG_MODE_CTRL, reg_mode_ctrl);
 		PHY_DEBUG(("[CAL]    MODE_CTRL (write) = 0x%08X\n", reg_mode_ctrl));
 
-		udelay(1); // 20060612.1.a
+		udelay(1);/* 20060612.1.a */
 
-		udelay(300); // 20060612.1.a
+		udelay(300);/* 20060612.1.a */
 
-		// b.
+		/* b. */
 		hw_get_dxx_reg(phw_data, REG_CALIB_READ1, &val);
 
 		PHY_DEBUG(("[CAL]    CALIB_READ1 = 0x%08X\n", val));
-		udelay(300); // 20060612.1.a
+		udelay(300);/* 20060612.1.a */
 
 		iqcal_tone_i0 = _s13_to_s32(val & 0x00001FFF);
 		iqcal_tone_q0 = _s13_to_s32((val & 0x03FFE000) >> 13);
@@ -1731,23 +1590,18 @@ unsigned char adjust_TXVGA_for_iq_mag(struct hw_data *phw_data)
 		iq_mag_0_tx = (s32) _sqrt(sqsum);
 		PHY_DEBUG(("[CAL]    ** auto_adjust_txvga_for_iq_mag_0_tx=%d\n", iq_mag_0_tx));
 
-		if( iq_mag_0_tx>=700 && iq_mag_0_tx<=1750 )
+		if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
 			break;
-		else if(iq_mag_0_tx > 1750)
-		{
-			init_txvga=-2;
+		else if (iq_mag_0_tx > 1750) {
+			init_txvga = -2;
 			continue;
-		}
-		else
+		} else
 			continue;
 
 	}
 
-	if( iq_mag_0_tx>=700 && iq_mag_0_tx<=1750 )
+	if (iq_mag_0_tx >= 700 && iq_mag_0_tx <= 1750)
 		return true;
 	else
 		return false;
 }
-
-
-
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index d9a8128b21f..990f9d4bdbb 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -966,42 +966,42 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 	switch (pHwData->phy_type) {
 	case RF_MAXIM_2825:
 	case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
-		number = sizeof(max2825_rf_data) / sizeof(max2825_rf_data[0]);
+		number = ARRAY_SIZE(max2825_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
 			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2827:
-		number = sizeof(max2827_rf_data) / sizeof(max2827_rf_data[0]);
+		number = ARRAY_SIZE(max2827_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2827_rf_data[i];
 			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2828:
-		number = sizeof(max2828_rf_data) / sizeof(max2828_rf_data[0]);
+		number = ARRAY_SIZE(max2828_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2828_rf_data[i];
 			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
 		}
 		break;
 	case RF_MAXIM_2829:
-		number = sizeof(max2829_rf_data) / sizeof(max2829_rf_data[0]);
+		number = ARRAY_SIZE(max2829_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = max2829_rf_data[i];
 			pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
 		}
 		break;
 	case RF_AIROHA_2230:
-		number = sizeof(al2230_rf_data) / sizeof(al2230_rf_data[0]);
+		number = ARRAY_SIZE(al2230_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = al2230_rf_data[i];
 			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
 		}
 		break;
 	case RF_AIROHA_2230S:
-		number = sizeof(al2230s_rf_data) / sizeof(al2230s_rf_data[0]);
+		number = ARRAY_SIZE(al2230s_rf_data);
 		for (i = 0; i < number; i++) {
 			pHwData->phy_para[i] = al2230s_rf_data[i];
 			pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
@@ -1013,12 +1013,12 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		#ifdef _PE_STATE_DUMP_
 		printk("* PLL_ON    low\n");
 		#endif
-		number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+		number = ARRAY_SIZE(al7230_rf_data_24);
 		Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
 		break;
 	case RF_WB_242:
 	case RF_WB_242_1:
-		number = sizeof(w89rf242_rf_data) / sizeof(w89rf242_rf_data[0]);
+		number = ARRAY_SIZE(w89rf242_rf_data);
 		for (i = 0; i < number; i++) {
 			ltmp = w89rf242_rf_data[i];
 			if (i == 4) { /* Update the VCO trim from EEPROM */
@@ -1119,7 +1119,7 @@ void RFSynthesizer_initial(struct hw_data *pHwData)
 		printk("* PLL_ON    low\n");
 		#endif
 
-		number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+		number = ARRAY_SIZE(al7230_rf_data_50);
 		Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
 		/* Write to register. number must less and equal than 16 */
 		for (i = 0; i < number; i++)
@@ -1747,7 +1747,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info C
 				pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18);
 			Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
 		} else if (Channel.band == BAND_TYPE_OFDM_5) {
-			count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
+			count = ARRAY_SIZE(max2829_channel_data_50);
 
 			for (i = 0; i < count; i++) {
 				if (max2829_channel_data_50[i][0] == Channel.ChanNo) {
@@ -1783,13 +1783,13 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info C
 				/* Update BB register */
 				BBProcessor_AL7230_2400(pHwData);
 
-				number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+				number = ARRAY_SIZE(al7230_rf_data_24);
 				Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
 			} else {
 				/* Update BB register */
 				BBProcessor_AL7230_5000(pHwData);
 
-				number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+				number = ARRAY_SIZE(al7230_rf_data_50);
 				Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
 			}
 
@@ -1814,7 +1814,7 @@ void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData,  struct chan_info C
 				Wb35Reg_Write(pHwData, 0x0864, ltmp);
 			}
 
-			count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
+			count = ARRAY_SIZE(al7230_channel_data_5);
 
 			for (i = 0; i < count; i++) {
 				if (al7230_channel_data_5[i][0] == Channel.ChanNo) {
@@ -1978,7 +1978,7 @@ u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	u8	i, count;
 
-	count = sizeof(al2230_txvga_data) / sizeof(al2230_txvga_data[0]);
+	count = ARRAY_SIZE(al2230_txvga_data);
 	for (i = 0; i < count; i++) {
 		if (al2230_txvga_data[i][1] >= index)
 			break;
@@ -1996,7 +1996,7 @@ u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	u8	i, count;
 
-	count = sizeof(al7230_txvga_data) / sizeof(al7230_txvga_data[0]);
+	count = ARRAY_SIZE(al7230_txvga_data);
 	for (i = 0; i < count; i++) {
 		if (al7230_txvga_data[i][1] >= index)
 			break;
@@ -2013,7 +2013,7 @@ u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
 	u32	PowerData;
 	u8	i, count;
 
-	count = sizeof(w89rf242_txvga_data) / sizeof(w89rf242_txvga_data[0]);
+	count = ARRAY_SIZE(w89rf242_txvga_data);
 	for (i = 0; i < count; i++) {
 		if (w89rf242_txvga_data[i][1] >= index)
 			break;
@@ -2184,14 +2184,14 @@ void GetTxVgaFromEEPROM(struct hw_data *pHwData)
 	/* Adjust WB_242 to WB_242_1 TxVga scale */
 	if (pHwData->phy_type == RF_WB_242) {
 		for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */
-			for (j = 0; j < (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])); j++) {
+			for (j = 0; j < ARRAY_SIZE(w89rf242_txvga_old_mapping); j++) {
 				if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) {
 					pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0];
 					break;
 				}
 			}
 
-			if (j == (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])))
+			if (j == ARRAY_SIZE(w89rf242_txvga_old_mapping))
 				pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
 		}
 	}
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 251caa052ee..abaa05a630f 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -700,7 +700,7 @@ static int wb35_hw_init(struct ieee80211_hw *hw)
 	Mds_initial(priv);
 
 	/*
-	 * If no user-defined address in the registry, use the addresss
+	 * If no user-defined address in the registry, use the address
 	 * "burned" on the NIC instead.
 	 */
 	pMacAddr = priv->sLocalPara.ThisMacAddress;
diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c
index 390628c6c1e..c4fe0ec9507 100644
--- a/drivers/staging/wlags49_h2/hcf.c
+++ b/drivers/staging/wlags49_h2/hcf.c
@@ -502,7 +502,7 @@ HCF_STATIC hcf_16* BASED xxxx[ ] = {
 #endif // MSF_COMPONENT_ID
 	NULL									//endsentinel
   };
-#define xxxx_PRI_IDENTITY_OFFSET	(sizeof(xxxx)/sizeof(xxxx[0]) - 3)
+#define xxxx_PRI_IDENTITY_OFFSET	(ARRAY_SIZE(xxxx) - 3)
 
 #endif // MSF_COMPONENT_ID / HCF_EXT_MB
 
diff --git a/drivers/staging/wlags49_h2/mdd.h b/drivers/staging/wlags49_h2/mdd.h
index b45c7ddd92e..b50b7b0a5ca 100644
--- a/drivers/staging/wlags49_h2/mdd.h
+++ b/drivers/staging/wlags49_h2/mdd.h
@@ -727,10 +727,10 @@ XX1( CFG_SCAN,					SCAN_RS_STRCT, scan_result[32]		 ) /*Scan results											*
 #define CFG_FCBE	0xFCBE	//FW codes ahead of available documentation, so ???????
 #define CFG_FCBF	0xFCBF	//FW codes ahead of available documentation, so ???????
 
-#define CFG_HANDOVER_ADDR				0xFCC0		//[AP] Station MAC Adrress re-associated with other AP
+#define CFG_HANDOVER_ADDR				0xFCC0		//[AP] Station MAC Address re-associated with other AP
 #define CFG_SCAN_CHANNEL				0xFCC2		//Channel set for host requested scan
 //;?#define CFG_SCAN_CHANNEL_MASK			0xFCC2		// contains
-#define CFG_DISASSOCIATE_ADDR			0xFCC4		//[AP] Station MAC Adrress to be disassociated
+#define CFG_DISASSOCIATE_ADDR			0xFCC4		//[AP] Station MAC Address to be disassociated
 #define CFG_PROBE_DATA_RATE				0xFCC5		//WARP connection control
 #define CFG_FRAME_BURST_LIMIT			0xFCC6		//
 #define CFG_COEXISTENSE_BEHAVIOUR		0xFCC7		//[AP]
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index 10abd406b09..19c33545865 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -23,7 +23,7 @@
  * software indicates your acceptance of these terms and conditions.  If you do
  * not agree with these terms and conditions, do not use the software.
  *
- * Copyright © 2003 Agere Systems Inc.
+ * Copyright (c) 2003 Agere Systems Inc.
  * All rights reserved.
  *
  * Redistribution and use in source or binary forms, with or without
@@ -44,7 +44,7 @@
  *
  * Disclaimer
  *
- * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
@@ -83,7 +83,6 @@
 #include <linux/if_arp.h>
 #include <linux/ioport.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -133,36 +132,35 @@ extern dbg_info_t *DbgInfo;
  ******************************************************************************/
 static int wl_adapter_attach(struct pcmcia_device *link)
 {
-    struct net_device   *dev;
-    struct wl_private	*lp;
-    /*------------------------------------------------------------------------*/
-
-    DBG_FUNC( "wl_adapter_attach" );
-    DBG_ENTER( DbgInfo );
-
-    dev = wl_device_alloc();
-    if(dev == NULL) {
-        DBG_ERROR( DbgInfo, "wl_device_alloc returned NULL\n");
-	return -ENOMEM;
-    }
-
-    link->io.NumPorts1      = HCF_NUM_IO_PORTS;
-    link->io.Attributes1    = IO_DATA_PATH_WIDTH_16;
-    link->io.IOAddrLines    = 6;
-    link->conf.Attributes   = CONF_ENABLE_IRQ;
-    link->conf.IntType      = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex  = 5;
-    link->conf.Present      = PRESENT_OPTION;
-
-    link->priv = dev;
-    lp = wl_priv(dev);
-    lp->link = link;
-
-    wl_adapter_insert(link);
-
-    DBG_LEAVE( DbgInfo );
-    return 0;
-} // wl_adapter_attach
+	struct net_device   *dev;
+	struct wl_private   *lp;
+	/*--------------------------------------------------------------------*/
+
+	DBG_FUNC("wl_adapter_attach");
+	DBG_ENTER(DbgInfo);
+
+	dev = wl_device_alloc();
+	if (dev == NULL) {
+		DBG_ERROR(DbgInfo, "wl_device_alloc returned NULL\n");
+		return -ENOMEM;
+	}
+
+	link->resource[0]->end  = HCF_NUM_IO_PORTS;
+	link->resource[0]->flags= IO_DATA_PATH_WIDTH_16;
+	link->conf.Attributes   = CONF_ENABLE_IRQ;
+	link->conf.IntType      = INT_MEMORY_AND_IO;
+	link->conf.ConfigIndex  = 5;
+	link->conf.Present      = PRESENT_OPTION;
+
+	link->priv = dev;
+	lp = wl_priv(dev);
+	lp->link = link;
+
+	wl_adapter_insert(link);
+
+	DBG_LEAVE(DbgInfo);
+	return 0;
+} /* wl_adapter_attach */
 /*============================================================================*/
 
 
@@ -190,25 +188,24 @@ static int wl_adapter_attach(struct pcmcia_device *link)
  ******************************************************************************/
 static void wl_adapter_detach(struct pcmcia_device *link)
 {
-    struct net_device   *dev = link->priv;
-    /*------------------------------------------------------------------------*/
-
+	struct net_device   *dev = link->priv;
+	/*--------------------------------------------------------------------*/
 
-    DBG_FUNC( "wl_adapter_detach" );
-    DBG_ENTER( DbgInfo );
-    DBG_PARAM( DbgInfo, "link", "0x%p", link );
+	DBG_FUNC("wl_adapter_detach");
+	DBG_ENTER(DbgInfo);
+	DBG_PARAM(DbgInfo, "link", "0x%p", link);
 
-    wl_adapter_release(link);
+	wl_adapter_release(link);
 
-    if (dev) {
-	unregister_wlags_sysfs(dev);
-	unregister_netdev(dev);
-    }
+	if (dev) {
+		unregister_wlags_sysfs(dev);
+		unregister_netdev(dev);
+	}
 
-    wl_device_dealloc(dev);
+	wl_device_dealloc(dev);
 
-    DBG_LEAVE( DbgInfo );
-} // wl_adapter_detach
+	DBG_LEAVE(DbgInfo);
+} /* wl_adapter_detach */
 /*============================================================================*/
 
 
@@ -232,33 +229,33 @@ static void wl_adapter_detach(struct pcmcia_device *link)
  *      N/A
  *
  ******************************************************************************/
-void wl_adapter_release( struct pcmcia_device *link )
+void wl_adapter_release(struct pcmcia_device *link)
 {
-    DBG_FUNC( "wl_adapter_release" );
-    DBG_ENTER( DbgInfo );
-    DBG_PARAM( DbgInfo, "link", "0x%p", link);
+	DBG_FUNC("wl_adapter_release");
+	DBG_ENTER(DbgInfo);
+	DBG_PARAM(DbgInfo, "link", "0x%p", link);
 
-    /* Stop hardware */
-    wl_remove(link->priv);
+	/* Stop hardware */
+	wl_remove(link->priv);
 
-    pcmcia_disable_device(link);
+	pcmcia_disable_device(link);
 
-    DBG_LEAVE( DbgInfo );
-} // wl_adapter_release
+	DBG_LEAVE(DbgInfo);
+} /* wl_adapter_release */
 /*============================================================================*/
 
 static int wl_adapter_suspend(struct pcmcia_device *link)
 {
-    struct net_device *dev = link->priv;
+	struct net_device *dev = link->priv;
 
-    //if (link->open) {
+	/* if (link->open) { */
 	netif_device_detach(dev);
 	wl_suspend(dev);
-//// CHECK!            pcmcia_release_configuration(link->handle);
-    //}
+	/* CHECK! pcmcia_release_configuration(link->handle); */
+	/* } */
 
-    return 0;
-} // wl_adapter_suspend
+	return 0;
+} /* wl_adapter_suspend */
 
 static int wl_adapter_resume(struct pcmcia_device *link)
 {
@@ -266,10 +263,10 @@ static int wl_adapter_resume(struct pcmcia_device *link)
 
 	wl_resume(dev);
 
-	netif_device_attach( dev );
+	netif_device_attach(dev);
 
 	return 0;
-} // wl_adapter_resume
+} /* wl_adapter_resume */
 
 /*******************************************************************************
  *	wl_adapter_insert()
@@ -291,60 +288,60 @@ static int wl_adapter_resume(struct pcmcia_device *link)
  *      N/A
  *
  ******************************************************************************/
-void wl_adapter_insert( struct pcmcia_device *link )
+void wl_adapter_insert(struct pcmcia_device *link)
 {
-    struct net_device       *dev;
-    int i;
-    int                     ret;
-    /*------------------------------------------------------------------------*/
+	struct net_device *dev;
+	int i;
+	int ret;
+	/*--------------------------------------------------------------------*/
 
-    DBG_FUNC( "wl_adapter_insert" );
-    DBG_ENTER( DbgInfo );
-    DBG_PARAM( DbgInfo, "link", "0x%p", link );
+	DBG_FUNC("wl_adapter_insert");
+	DBG_ENTER(DbgInfo);
+	DBG_PARAM(DbgInfo, "link", "0x%p", link);
 
-    dev     = link->priv;
+	dev     = link->priv;
 
-    /* Do we need to allocate an interrupt? */
-    link->conf.Attributes |= CONF_ENABLE_IRQ;
+	/* Do we need to allocate an interrupt? */
+	link->conf.Attributes |= CONF_ENABLE_IRQ;
+	link->io_lines = 6;
 
-    ret = pcmcia_request_io(link, &link->io);
-    if (ret != 0)
-        goto failed;
+	ret = pcmcia_request_io(link);
+	if (ret != 0)
+		goto failed;
 
-    ret = pcmcia_request_irq(link, (void *) wl_isr);
-    if (ret != 0)
-        goto failed;
+	ret = pcmcia_request_irq(link, (void *) wl_isr);
+	if (ret != 0)
+		goto failed;
 
-    ret = pcmcia_request_configuration(link, &link->conf);
-    if (ret != 0)
-        goto failed;
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret != 0)
+		goto failed;
 
-    dev->irq        = link->irq;
-    dev->base_addr  = link->io.BasePort1;
+	dev->irq        = link->irq;
+	dev->base_addr  = link->resource[0]->start;
 
-    SET_NETDEV_DEV(dev, &link->dev);
-    if (register_netdev(dev) != 0) {
-	printk("%s: register_netdev() failed\n", MODULE_NAME);
-	goto failed;
-    }
+	SET_NETDEV_DEV(dev, &link->dev);
+	if (register_netdev(dev) != 0) {
+		printk("%s: register_netdev() failed\n", MODULE_NAME);
+		goto failed;
+	}
 
-    register_wlags_sysfs(dev);
+	register_wlags_sysfs(dev);
 
-    printk(KERN_INFO "%s: Wireless, io_addr %#03lx, irq %d, ""mac_address ",
-               dev->name, dev->base_addr, dev->irq);
-    for( i = 0; i < ETH_ALEN; i++ ) {
-        printk("%02X%c", dev->dev_addr[i], ((i < (ETH_ALEN-1)) ? ':' : '\n'));
-    }
+	printk(KERN_INFO "%s: Wireless, io_addr %#03lx, irq %d, ""mac_address ",
+		dev->name, dev->base_addr, dev->irq);
+	for (i = 0; i < ETH_ALEN; i++)
+		printk("%02X%c", dev->dev_addr[i], ((i < (ETH_ALEN-1)) ? ':' : '\n'));
 
-    DBG_LEAVE( DbgInfo );
-    return;
+	DBG_LEAVE(DbgInfo);
+	return;
 
 failed:
-    wl_adapter_release( link );
+	wl_adapter_release(link);
 
-    DBG_LEAVE(DbgInfo);
-    return;
-} // wl_adapter_insert
+	DBG_LEAVE(DbgInfo);
+	return;
+} /* wl_adapter_insert */
 /*============================================================================*/
 
 
@@ -367,38 +364,36 @@ failed:
  *      errno value otherwise
  *
  ******************************************************************************/
-int wl_adapter_open( struct net_device *dev )
+int wl_adapter_open(struct net_device *dev)
 {
-    struct wl_private *lp = wl_priv(dev);
-    struct pcmcia_device *link = lp->link;
-    int         result = 0;
-    int         hcf_status = HCF_SUCCESS;
-    /*------------------------------------------------------------------------*/
-
-
-    DBG_FUNC( "wl_adapter_open" );
-    DBG_ENTER( DbgInfo );
-	DBG_PRINT( "%s\n", VERSION_INFO );
-    DBG_PARAM( DbgInfo, "dev", "%s (0x%p)", dev->name, dev );
-
-    if(!pcmcia_dev_present(link))
-    {
-        DBG_LEAVE( DbgInfo );
-        return -ENODEV;
-    }
-
-    link->open++;
-
-    hcf_status = wl_open( dev );
-
-    if( hcf_status != HCF_SUCCESS ) {
-        link->open--;
-        result = -ENODEV;
-    }
-
-    DBG_LEAVE( DbgInfo );
-    return result;
-} // wl_adapter_open
+	struct wl_private *lp = wl_priv(dev);
+	struct pcmcia_device *link = lp->link;
+	int result = 0;
+	int hcf_status = HCF_SUCCESS;
+	/*--------------------------------------------------------------------*/
+
+	DBG_FUNC("wl_adapter_open");
+	DBG_ENTER(DbgInfo);
+	DBG_PRINT("%s\n", VERSION_INFO);
+	DBG_PARAM(DbgInfo, "dev", "%s (0x%p)", dev->name, dev);
+
+	if (!pcmcia_dev_present(link)) {
+		DBG_LEAVE(DbgInfo);
+		return -ENODEV;
+	}
+
+	link->open++;
+
+	hcf_status = wl_open(dev);
+
+	if (hcf_status != HCF_SUCCESS) {
+		link->open--;
+		result = -ENODEV;
+	}
+
+	DBG_LEAVE(DbgInfo);
+	return result;
+} /* wl_adapter_open */
 /*============================================================================*/
 
 
@@ -421,56 +416,55 @@ int wl_adapter_open( struct net_device *dev )
  *      errno value otherwise
  *
  ******************************************************************************/
-int wl_adapter_close( struct net_device *dev )
+int wl_adapter_close(struct net_device *dev)
 {
-    struct wl_private *lp = wl_priv(dev);
-    struct pcmcia_device *link = lp->link;
-    /*------------------------------------------------------------------------*/
+	struct wl_private *lp = wl_priv(dev);
+	struct pcmcia_device *link = lp->link;
+	/*--------------------------------------------------------------------*/
 
+	DBG_FUNC("wl_adapter_close");
+	DBG_ENTER(DbgInfo);
+	DBG_PARAM(DbgInfo, "dev", "%s (0x%p)", dev->name, dev);
 
-    DBG_FUNC( "wl_adapter_close" );
-    DBG_ENTER( DbgInfo );
-    DBG_PARAM( DbgInfo, "dev", "%s (0x%p)", dev->name, dev );
+	if (link == NULL) {
+		DBG_LEAVE(DbgInfo);
+		return -ENODEV;
+	}
 
-    if( link == NULL ) {
-        DBG_LEAVE( DbgInfo );
-        return -ENODEV;
-    }
+	DBG_TRACE(DbgInfo, "%s: Shutting down adapter.\n", dev->name);
+	wl_close(dev);
 
-    DBG_TRACE( DbgInfo, "%s: Shutting down adapter.\n", dev->name );
-    wl_close( dev );
+	link->open--;
 
-    link->open--;
-
-    DBG_LEAVE( DbgInfo );
-    return 0;
-} // wl_adapter_close
+	DBG_LEAVE(DbgInfo);
+	return 0;
+} /* wl_adapter_close */
 /*============================================================================*/
 
 static struct pcmcia_device_id wl_adapter_ids[] = {
-#if ! ((HCF_TYPE) & HCF_TYPE_HII5)
+#if !((HCF_TYPE) & HCF_TYPE_HII5)
 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0003),
 	PCMCIA_DEVICE_PROD_ID12("Agere Systems", "Wireless PC Card Model 0110",
-			    0x33103a9b, 0xe175b0dd),
+				0x33103a9b, 0xe175b0dd),
 #else
 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0004),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "WCF54G_Wireless-G_CompactFlash_Card",
-                            0x0733cc81, 0x98a599e1),
-#endif  // (HCF_TYPE) & HCF_TYPE_HII5
+				0x0733cc81, 0x98a599e1),
+#endif  /* (HCF_TYPE) & HCF_TYPE_HII5 */
 	PCMCIA_DEVICE_NULL,
-	};
+};
 MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids);
 
 static struct pcmcia_driver wlags49_driver = {
-    .owner          = THIS_MODULE,
-    .drv            = {
-	.name   = DRIVER_NAME,
-    },
-    .probe	= wl_adapter_attach,
-    .remove	= wl_adapter_detach,
-    .id_table	= wl_adapter_ids,
-    .suspend	= wl_adapter_suspend,
-    .resume	= wl_adapter_resume,
+	.owner	    = THIS_MODULE,
+	.drv	    = {
+		.name = DRIVER_NAME,
+	},
+	.probe	    = wl_adapter_attach,
+	.remove	    = wl_adapter_detach,
+	.id_table   = wl_adapter_ids,
+	.suspend    = wl_adapter_suspend,
+	.resume	    = wl_adapter_resume,
 };
 
 
@@ -493,21 +487,20 @@ static struct pcmcia_driver wlags49_driver = {
  *      -1 on error
  *
  ******************************************************************************/
-int wl_adapter_init_module( void )
+int wl_adapter_init_module(void)
 {
-    int ret;
-    /*------------------------------------------------------------------------*/
+	int ret;
+	/*--------------------------------------------------------------------*/
 
+	DBG_FUNC("wl_adapter_init_module");
+	DBG_ENTER(DbgInfo);
+	DBG_TRACE(DbgInfo, "wl_adapter_init_module() -- PCMCIA\n");
 
-    DBG_FUNC( "wl_adapter_init_module" );
-    DBG_ENTER( DbgInfo );
-    DBG_TRACE( DbgInfo, "wl_adapter_init_module() -- PCMCIA\n" );
+	ret = pcmcia_register_driver(&wlags49_driver);
 
-    ret = pcmcia_register_driver(&wlags49_driver);
-
-    DBG_LEAVE( DbgInfo );
-    return ret;
-} // wl_adapter_init_module
+	DBG_LEAVE(DbgInfo);
+	return ret;
+} /* wl_adapter_init_module */
 /*============================================================================*/
 
 
@@ -528,18 +521,18 @@ int wl_adapter_init_module( void )
  *      N/A
  *
  ******************************************************************************/
-void wl_adapter_cleanup_module( void )
+void wl_adapter_cleanup_module(void)
 {
-    DBG_FUNC( "wl_adapter_cleanup_module" );
-    DBG_ENTER( DbgInfo );
-    DBG_TRACE( DbgInfo, "wl_adapter_cleanup_module() -- PCMCIA\n" );
+	DBG_FUNC("wl_adapter_cleanup_module");
+	DBG_ENTER(DbgInfo);
+	DBG_TRACE(DbgInfo, "wl_adapter_cleanup_module() -- PCMCIA\n");
 
 
-    pcmcia_unregister_driver(&wlags49_driver);
+	pcmcia_unregister_driver(&wlags49_driver);
 
-    DBG_LEAVE( DbgInfo );
-    return;
-} // wl_adapter_cleanup_module
+	DBG_LEAVE(DbgInfo);
+	return;
+} /* wl_adapter_cleanup_module */
 /*============================================================================*/
 
 
@@ -562,17 +555,16 @@ void wl_adapter_cleanup_module( void )
  *      0 otherwise
  *
  ******************************************************************************/
-int wl_adapter_is_open( struct net_device *dev )
+int wl_adapter_is_open(struct net_device *dev)
 {
-    struct wl_private *lp = wl_priv(dev);
-    struct pcmcia_device *link = lp->link;
+	struct wl_private *lp = wl_priv(dev);
+	struct pcmcia_device *link = lp->link;
 
-    if(!pcmcia_dev_present(link)) {
-        return 0;
-    }
+	if (!pcmcia_dev_present(link))
+		return 0;
 
-    return( link->open );
-} // wl_adapter_is_open
+	return link->open;
+} /* wl_adapter_is_open */
 /*============================================================================*/
 
 
@@ -596,97 +588,95 @@ int wl_adapter_is_open( struct net_device *dev )
  *      a pointer to a string describing the error(s)
  *
  ******************************************************************************/
-const char* DbgEvent( int mask )
+const char *DbgEvent(int mask)
 {
-    static char DbgBuffer[256];
-    char *pBuf;
-    /*------------------------------------------------------------------------*/
-
+	static char DbgBuffer[256];
+	char *pBuf;
+	/*--------------------------------------------------------------------*/
 
-    pBuf    = DbgBuffer;
-    *pBuf   = '\0';
+	pBuf    = DbgBuffer;
+	*pBuf   = '\0';
 
 
-    if( mask & CS_EVENT_WRITE_PROTECT )
-        strcat( pBuf, "WRITE_PROTECT " );
+	if (mask & CS_EVENT_WRITE_PROTECT)
+		strcat(pBuf, "WRITE_PROTECT ");
 
-    if(mask & CS_EVENT_CARD_LOCK)
-        strcat( pBuf, "CARD_LOCK " );
+	if (mask & CS_EVENT_CARD_LOCK)
+		strcat(pBuf, "CARD_LOCK ");
 
-    if(mask & CS_EVENT_CARD_INSERTION)
-        strcat( pBuf, "CARD_INSERTION " );
+	if (mask & CS_EVENT_CARD_INSERTION)
+		strcat(pBuf, "CARD_INSERTION ");
 
-    if(mask & CS_EVENT_CARD_REMOVAL)
-        strcat( pBuf, "CARD_REMOVAL " );
+	if (mask & CS_EVENT_CARD_REMOVAL)
+		strcat(pBuf, "CARD_REMOVAL ");
 
-    if(mask & CS_EVENT_BATTERY_DEAD)
-        strcat( pBuf, "BATTERY_DEAD " );
+	if (mask & CS_EVENT_BATTERY_DEAD)
+		strcat(pBuf, "BATTERY_DEAD ");
 
-    if(mask & CS_EVENT_BATTERY_LOW)
-        strcat( pBuf, "BATTERY_LOW " );
+	if (mask & CS_EVENT_BATTERY_LOW)
+		strcat(pBuf, "BATTERY_LOW ");
 
-    if(mask & CS_EVENT_READY_CHANGE)
-        strcat( pBuf, "READY_CHANGE " );
+	if (mask & CS_EVENT_READY_CHANGE)
+		strcat(pBuf, "READY_CHANGE ");
 
-    if(mask & CS_EVENT_CARD_DETECT)
-        strcat( pBuf, "CARD_DETECT " );
+	if (mask & CS_EVENT_CARD_DETECT)
+		strcat(pBuf, "CARD_DETECT ");
 
-    if(mask & CS_EVENT_RESET_REQUEST)
-        strcat( pBuf, "RESET_REQUEST " );
+	if (mask & CS_EVENT_RESET_REQUEST)
+		strcat(pBuf, "RESET_REQUEST ");
 
-    if(mask & CS_EVENT_RESET_PHYSICAL)
-        strcat( pBuf, "RESET_PHYSICAL " );
+	if (mask & CS_EVENT_RESET_PHYSICAL)
+		strcat(pBuf, "RESET_PHYSICAL ");
 
-    if(mask & CS_EVENT_CARD_RESET)
-        strcat( pBuf, "CARD_RESET " );
+	if (mask & CS_EVENT_CARD_RESET)
+		strcat(pBuf, "CARD_RESET ");
 
-    if(mask & CS_EVENT_REGISTRATION_COMPLETE)
-        strcat( pBuf, "REGISTRATION_COMPLETE " );
+	if (mask & CS_EVENT_REGISTRATION_COMPLETE)
+		strcat(pBuf, "REGISTRATION_COMPLETE ");
 
-    // if(mask & CS_EVENT_RESET_COMPLETE)
-    //     strcat( pBuf, "RESET_COMPLETE " );
+	/* if (mask & CS_EVENT_RESET_COMPLETE)
+		strcat(pBuf, "RESET_COMPLETE "); */
 
-    if(mask & CS_EVENT_PM_SUSPEND)
-        strcat( pBuf, "PM_SUSPEND " );
+	if (mask & CS_EVENT_PM_SUSPEND)
+		strcat(pBuf, "PM_SUSPEND ");
 
-    if(mask & CS_EVENT_PM_RESUME)
-        strcat( pBuf, "PM_RESUME " );
+	if (mask & CS_EVENT_PM_RESUME)
+		strcat(pBuf, "PM_RESUME ");
 
-    if(mask & CS_EVENT_INSERTION_REQUEST)
-        strcat( pBuf, "INSERTION_REQUEST " );
+	if (mask & CS_EVENT_INSERTION_REQUEST)
+		strcat(pBuf, "INSERTION_REQUEST ");
 
-    if(mask & CS_EVENT_EJECTION_REQUEST)
-        strcat( pBuf, "EJECTION_REQUEST " );
+	if (mask & CS_EVENT_EJECTION_REQUEST)
+		strcat(pBuf, "EJECTION_REQUEST ");
 
-    if(mask & CS_EVENT_MTD_REQUEST)
-        strcat( pBuf, "MTD_REQUEST " );
+	if (mask & CS_EVENT_MTD_REQUEST)
+		strcat(pBuf, "MTD_REQUEST ");
 
-    if(mask & CS_EVENT_ERASE_COMPLETE)
-        strcat( pBuf, "ERASE_COMPLETE " );
+	if (mask & CS_EVENT_ERASE_COMPLETE)
+		strcat(pBuf, "ERASE_COMPLETE ");
 
-    if(mask & CS_EVENT_REQUEST_ATTENTION)
-        strcat( pBuf, "REQUEST_ATTENTION " );
+	if (mask & CS_EVENT_REQUEST_ATTENTION)
+		strcat(pBuf, "REQUEST_ATTENTION ");
 
-    if(mask & CS_EVENT_CB_DETECT)
-        strcat( pBuf, "CB_DETECT " );
+	if (mask & CS_EVENT_CB_DETECT)
+		strcat(pBuf, "CB_DETECT ");
 
-    if(mask & CS_EVENT_3VCARD)
-        strcat( pBuf, "3VCARD " );
+	if (mask & CS_EVENT_3VCARD)
+		strcat(pBuf, "3VCARD ");
 
-    if(mask & CS_EVENT_XVCARD)
-        strcat( pBuf, "XVCARD " );
+	if (mask & CS_EVENT_XVCARD)
+		strcat(pBuf, "XVCARD ");
 
 
-    if( *pBuf ) {
-        pBuf[strlen(pBuf) - 1] = '\0';
-    } else {
-        if( mask != 0x0 ) {
-            sprintf( pBuf, "<<0x%08x>>", mask );
-        }
-    }
+	if (*pBuf) {
+		pBuf[strlen(pBuf) - 1] = '\0';
+	} else {
+		if (mask != 0x0)
+			sprintf(pBuf, "<<0x%08x>>", mask);
+	}
 
-    return pBuf;
-} // DbgEvent
+	return pBuf;
+} /* DbgEvent */
 /*============================================================================*/
 
 #endif  /* DBG */
diff --git a/drivers/staging/wlags49_h2/wl_cs.h b/drivers/staging/wlags49_h2/wl_cs.h
index a9b8828a1a2..21f17be4f02 100644
--- a/drivers/staging/wlags49_h2/wl_cs.h
+++ b/drivers/staging/wlags49_h2/wl_cs.h
@@ -72,8 +72,6 @@ void wl_adapter_insert(struct pcmcia_device *link);
 
 void wl_adapter_release(struct pcmcia_device *link);
 
-int wl_adapter_event(event_t event, int priority, event_callback_args_t *args );
-
 int wl_adapter_init_module( void );
 
 void wl_adapter_cleanup_module( void );
diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h
index d9a0ad039c1..02f0a20e178 100644
--- a/drivers/staging/wlags49_h2/wl_internal.h
+++ b/drivers/staging/wlags49_h2/wl_internal.h
@@ -69,7 +69,6 @@
  ******************************************************************************/
 #include <linux/version.h>
 #ifdef BUS_PCMCIA
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
diff --git a/drivers/staging/wlags49_h2/wl_netdev.c b/drivers/staging/wlags49_h2/wl_netdev.c
index 1aa61dbdb79..e2a7ad05e54 100644
--- a/drivers/staging/wlags49_h2/wl_netdev.c
+++ b/drivers/staging/wlags49_h2/wl_netdev.c
@@ -1905,8 +1905,8 @@ int wl_rx_dma( struct net_device *dev )
     DBG_FUNC("wl_rx")
     DBG_PARAM(DbgInfo, "dev", "%s (0x%p)", dev->name, dev);
 
-    if((( lp = (struct wl_private *)dev->priv ) != NULL ) &&
-          !( lp->flags & WVLAN2_UIL_BUSY )) {
+    if((( lp = dev->priv ) != NULL ) &&
+	!( lp->flags & WVLAN2_UIL_BUSY )) {
 
 #ifdef USE_RTS
         if( lp->useRTS == 1 ) {
diff --git a/drivers/staging/wlags49_h2/wl_pci.c b/drivers/staging/wlags49_h2/wl_pci.c
index 6751b4bad2e..020b17adee2 100644
--- a/drivers/staging/wlags49_h2/wl_pci.c
+++ b/drivers/staging/wlags49_h2/wl_pci.c
@@ -117,9 +117,13 @@ enum hermes_pci_versions {
 };
 
 static struct pci_device_id wl_pci_tbl[] __devinitdata = {
-	{ WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
-    { WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
-    { WL_LKM_PCI_VENDOR_ID, WL_LKM_PCI_DEVICE_ID_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
+	{ PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_0,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
+	{ PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_1,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
+	{ PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_2,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Agere_Systems_Mini_PCI_V1 },
+
 	{ }			/* Terminating entry */
 };
 
@@ -465,7 +469,7 @@ void __devexit wl_pci_remove(struct pci_dev *pdev)
     free_irq( dev->irq, dev );
 
 #ifdef ENABLE_DMA
-    wl_pci_dma_free( pdev, (struct wl_private *)dev->priv );
+    wl_pci_dma_free( pdev, dev->priv );
 #endif
 
     wl_device_dealloc( dev );
@@ -534,7 +538,7 @@ int wl_pci_setup( struct pci_dev *pdev )
 
 #ifdef ENABLE_DMA
     /* Allocate DMA Descriptors */
-    if( wl_pci_dma_alloc( pdev, (struct wl_private *)dev->priv ) < 0 ) {
+    if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) {
         DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" );
         DBG_LEAVE( DbgInfo );
         return -ENOMEM;
@@ -570,7 +574,7 @@ int wl_pci_setup( struct pci_dev *pdev )
 	}
 
     /* Make sure interrupts are enabled properly for CardBus */
-    lp = (struct wl_private *)dev->priv;
+    lp = dev->priv;
 
     if( lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_CARDBUS ||
 	    lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_PCI 		) {
diff --git a/drivers/staging/wlags49_h2/wl_pci.h b/drivers/staging/wlags49_h2/wl_pci.h
index 18d7b514ea6..cea04c44ec4 100644
--- a/drivers/staging/wlags49_h2/wl_pci.h
+++ b/drivers/staging/wlags49_h2/wl_pci.h
@@ -67,10 +67,10 @@
 /*******************************************************************************
  *  constant definitions
  ******************************************************************************/
-#define WL_LKM_PCI_VENDOR_ID    0x11C1  // Lucent Microelectronics
-#define WL_LKM_PCI_DEVICE_ID_0  0xAB30  // Mini PCI
-#define WL_LKM_PCI_DEVICE_ID_1  0xAB34  // Mini PCI
-#define WL_LKM_PCI_DEVICE_ID_2  0xAB11  // WARP CardBus
+#define PCI_VENDOR_IDWL_LKM     0x11C1  /* Lucent Microelectronics */
+#define PCI_DEVICE_ID_WL_LKM_0  0xAB30  /* Mini PCI */
+#define PCI_DEVICE_ID_WL_LKM_1  0xAB34  /* Mini PCI */
+#define PCI_DEVICE_ID_WL_LKM_2  0xAB11  /* WARP CardBus */
 
 
 
diff --git a/drivers/staging/wlags49_h2/wl_profile.c b/drivers/staging/wlags49_h2/wl_profile.c
index 292d5792dd7..7a1337db7aa 100644
--- a/drivers/staging/wlags49_h2/wl_profile.c
+++ b/drivers/staging/wlags49_h2/wl_profile.c
@@ -169,7 +169,7 @@ void parse_config(struct net_device *dev)
 	DBG_ENTER(DbgInfo);
 
 	/* Get the wavelan specific info for this device */
-	wvlan_config = (struct wl_private *)dev->priv;
+	wvlan_config = dev->priv;
 	if (wvlan_config == NULL) {
 		DBG_ERROR(DbgInfo, "Wavelan specific info struct not present?\n");
 		return;
diff --git a/drivers/staging/wlags49_h2/wl_util.c b/drivers/staging/wlags49_h2/wl_util.c
index bbdb9973d1e..ce8ed410a7e 100644
--- a/drivers/staging/wlags49_h2/wl_util.c
+++ b/drivers/staging/wlags49_h2/wl_util.c
@@ -259,41 +259,6 @@ int is_valid_key_string( char *s )
 
 
 /*******************************************************************************
- *	hexdigit2int()
- *******************************************************************************
- *
- *  DESCRIPTION:
- *
- *      Converts a hexadecimal digit character to an integer
- *
- *  PARAMETERS:
- *
- *      c   - the hexadecimal digit character
- *
- *  RETURNS:
- *
- *      the converted integer
- *
- ******************************************************************************/
-int hexdigit2int( char c )
-{
-   if( c >= '0' && c <= '9' )
-       return c - '0';
-
-   if( c >= 'A' && c <= 'F' )
-       return c - 'A' + 10;
-
-   if( c >= 'a' && c <= 'f' )
-       return c - 'a' + 10;
-
-   return 0;
-} // hexdigit2int
-/*============================================================================*/
-
-
-
-
-/*******************************************************************************
  *	key_string2key()
  *******************************************************************************
  *
@@ -328,7 +293,7 @@ void key_string2key( char *ks, KEY_STRCT *key )
         p = (char *)key->key;
 
         for( i = 2; i < l; i+=2 ) {
-           *p++ = ( hexdigit2int( ks[i] ) << 4 ) + hexdigit2int (ks[i+1] );
+			*p++ = (hex_to_bin(ks[i]) << 4) + hex_to_bin(ks[i+1]);
            n++;
         }
 
diff --git a/drivers/staging/wlags49_h2/wl_util.h b/drivers/staging/wlags49_h2/wl_util.h
index 561e85b5c9b..ba537a60059 100644
--- a/drivers/staging/wlags49_h2/wl_util.h
+++ b/drivers/staging/wlags49_h2/wl_util.h
@@ -71,8 +71,6 @@ int is_valid_key_string( char *s );
 
 void key_string2key( char *ks, KEY_STRCT *key );
 
-int hexdigit2int( char c );
-
 void wl_hcf_error( struct net_device *dev, int hcfStatus );
 
 void wl_endian_translate_event( ltv_t *pLtv );
diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig
index 82fcc1665e9..426d4efbabc 100644
--- a/drivers/staging/wlan-ng/Kconfig
+++ b/drivers/staging/wlan-ng/Kconfig
@@ -1,6 +1,6 @@
 config PRISM2_USB
 	tristate "Prism2.5/3 USB driver"
-	depends on WLAN && USB
+	depends on WLAN && USB && CFG80211
 	select WIRELESS_EXT
 	select WEXT_PRIV
 	default n
diff --git a/drivers/staging/wlan-ng/Makefile b/drivers/staging/wlan-ng/Makefile
index 5edac5c8d4e..db5d597563f 100644
--- a/drivers/staging/wlan-ng/Makefile
+++ b/drivers/staging/wlan-ng/Makefile
@@ -4,5 +4,4 @@ prism2_usb-objs := prism2usb.o \
 		p80211conv.o \
 		p80211req.o \
 		p80211wep.o \
-		p80211wext.o \
 		p80211netdev.o
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
new file mode 100644
index 00000000000..368c30a9d5f
--- /dev/null
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -0,0 +1,760 @@
+/* cfg80211 Interface for prism2_usb module */
+
+
+/* Prism2 channell/frequency/bitrate declarations */
+static const struct ieee80211_channel prism2_channels[] = {
+	{ .center_freq = 2412 },
+	{ .center_freq = 2417 },
+	{ .center_freq = 2422 },
+	{ .center_freq = 2427 },
+	{ .center_freq = 2432 },
+	{ .center_freq = 2437 },
+	{ .center_freq = 2442 },
+	{ .center_freq = 2447 },
+	{ .center_freq = 2452 },
+	{ .center_freq = 2457 },
+	{ .center_freq = 2462 },
+	{ .center_freq = 2467 },
+	{ .center_freq = 2472 },
+	{ .center_freq = 2484 },
+};
+
+static const struct ieee80211_rate prism2_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20 },
+	{ .bitrate = 55 },
+	{ .bitrate = 110 }
+};
+
+#define PRISM2_NUM_CIPHER_SUITES 2
+static const u32 prism2_cipher_suites[PRISM2_NUM_CIPHER_SUITES] = {
+	WLAN_CIPHER_SUITE_WEP40,
+	WLAN_CIPHER_SUITE_WEP104
+};
+
+
+/* prism2 device private data */
+struct prism2_wiphy_private {
+	wlandevice_t *wlandev;
+
+	struct ieee80211_supported_band band;
+	struct ieee80211_channel channels[ARRAY_SIZE(prism2_channels)];
+	struct ieee80211_rate rates[ARRAY_SIZE(prism2_rates)];
+
+	struct cfg80211_scan_request *scan_request;
+};
+
+static const void * const prism2_wiphy_privid = &prism2_wiphy_privid;
+
+
+/* Helper Functions */
+static int prism2_result2err(int prism2_result)
+{
+	int err = 0;
+
+	switch (prism2_result) {
+	case P80211ENUM_resultcode_invalid_parameters:
+		err = -EINVAL;
+		break;
+	case P80211ENUM_resultcode_implementation_failure:
+		err = -EIO;
+		break;
+	case P80211ENUM_resultcode_not_supported:
+		err = -EOPNOTSUPP;
+		break;
+	default:
+		err = 0;
+		break;
+	}
+
+	return err;
+}
+
+static int prism2_domibset_uint32(wlandevice_t *wlandev, u32 did, u32 data)
+{
+	struct p80211msg_dot11req_mibset msg;
+	p80211item_uint32_t *mibitem = (p80211item_uint32_t *) &msg.mibattribute.data;
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem->did = did;
+	mibitem->data = data;
+
+	return p80211req_dorequest(wlandev, (u8 *) &msg);
+}
+
+static int prism2_domibset_pstr32(wlandevice_t *wlandev,
+				  u32 did, u8 len, u8 *data)
+{
+	struct p80211msg_dot11req_mibset msg;
+	p80211item_pstr32_t *mibitem = (p80211item_pstr32_t *) &msg.mibattribute.data;
+
+	msg.msgcode = DIDmsg_dot11req_mibset;
+	mibitem->did = did;
+	mibitem->data.len = len;
+	memcpy(mibitem->data.data, data, len);
+
+	return p80211req_dorequest(wlandev, (u8 *) &msg);
+}
+
+
+/* The interface functions, called by the cfg80211 layer */
+int prism2_change_virtual_intf(struct wiphy *wiphy,
+			       struct net_device *dev,
+			       enum nl80211_iftype type, u32 *flags,
+			       struct vif_params *params)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	u32 data;
+	int result;
+	int err = 0;
+
+	switch (type) {
+	case NL80211_IFTYPE_ADHOC:
+		if (wlandev->macmode == WLAN_MACMODE_IBSS_STA)
+			goto exit;
+		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
+		data = 0;
+		break;
+	case NL80211_IFTYPE_STATION:
+		if (wlandev->macmode == WLAN_MACMODE_ESS_STA)
+			goto exit;
+		wlandev->macmode = WLAN_MACMODE_ESS_STA;
+		data = 1;
+		break;
+	default:
+		printk(KERN_WARNING "Operation mode: %d not support\n", type);
+		return -EOPNOTSUPP;
+	}
+
+	/* Set Operation mode to the PORT TYPE RID */
+	result = prism2_domibset_uint32(wlandev, DIDmib_p2_p2Static_p2CnfPortType, data);
+
+	if (result)
+		err = -EFAULT;
+
+	dev->ieee80211_ptr->iftype = type;
+
+exit:
+	return err;
+}
+
+int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
+		   u8 key_index, const u8 *mac_addr,
+		   struct key_params *params)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	u32 did;
+
+	int err = 0;
+	int result = 0;
+
+	switch (params->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
+						key_index);
+		if (result)
+			goto exit;
+
+		/* send key to driver */
+		switch (key_index) {
+		case 0:
+			did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
+			break;
+
+		case 1:
+			did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
+			break;
+
+		case 2:
+			did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
+			break;
+
+		case 3:
+			did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
+			break;
+
+		default:
+			err = -EINVAL;
+			goto exit;
+		}
+
+		result = prism2_domibset_pstr32(wlandev, did, params->key_len, params->key);
+		if (result)
+			goto exit;
+		break;
+
+	default:
+		pr_debug("Unsupported cipher suite\n");
+		result = 1;
+	}
+
+exit:
+	if (result)
+		err = -EFAULT;
+
+	return err;
+}
+
+int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
+		   u8 key_index, const u8 *mac_addr, void *cookie,
+		   void (*callback)(void *cookie, struct key_params*))
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	struct key_params params;
+	int len;
+
+	if (key_index >= NUM_WEPKEYS)
+		return -EINVAL;
+
+	len = wlandev->wep_keylens[key_index];
+	memset(&params, 0, sizeof(params));
+
+	if (len == 13)
+		params.cipher = WLAN_CIPHER_SUITE_WEP104;
+	else if (len == 5)
+		params.cipher = WLAN_CIPHER_SUITE_WEP104;
+	else
+		return -ENOENT;
+	params.key_len = len;
+	params.key = wlandev->wep_keys[key_index];
+
+	callback(cookie, &params);
+
+	return 0;
+}
+
+int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
+		   u8 key_index, const u8 *mac_addr)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	u32 did;
+	int err = 0;
+	int result = 0;
+
+	/* There is no direct way in the hardware (AFAIK) of removing
+	   a key, so we will cheat by setting the key to a bogus value */
+	/* send key to driver */
+	switch (key_index) {
+	case 0:
+		did =
+		    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
+		break;
+
+	case 1:
+		did =
+		    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
+		break;
+
+	case 2:
+		did =
+		    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
+		break;
+
+	case 3:
+		did =
+		    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
+		break;
+
+	default:
+		err = -EINVAL;
+		goto exit;
+	}
+
+	result = prism2_domibset_pstr32(wlandev, did, 13, "0000000000000");
+
+exit:
+	if (result)
+		err = -EFAULT;
+
+	return err;
+}
+
+int prism2_set_default_key(struct wiphy *wiphy, struct net_device *dev,
+			   u8 key_index)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+
+	int err = 0;
+	int result = 0;
+
+	result = prism2_domibset_uint32(wlandev,
+		DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
+		key_index);
+
+	if (result)
+		err = -EFAULT;
+
+	return err;
+}
+
+
+int prism2_get_station(struct wiphy *wiphy, struct net_device *dev,
+		       u8 *mac, struct station_info *sinfo)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	struct p80211msg_lnxreq_commsquality quality;
+	int result;
+
+	memset(sinfo, 0, sizeof(*sinfo));
+
+	if ((wlandev == NULL) || (wlandev->msdstate != WLAN_MSD_RUNNING))
+		return -EOPNOTSUPP;
+
+	/* build request message */
+	quality.msgcode = DIDmsg_lnxreq_commsquality;
+	quality.dbm.data = P80211ENUM_truth_true;
+	quality.dbm.status = P80211ENUM_msgitem_status_data_ok;
+
+	/* send message to nsd */
+	if (wlandev->mlmerequest == NULL)
+		return -EOPNOTSUPP;
+
+	result = wlandev->mlmerequest(wlandev, (struct p80211msg *) &quality);
+
+
+	if (result == 0) {
+		sinfo->txrate.legacy = quality.txrate.data;
+		sinfo->filled |= STATION_INFO_TX_BITRATE;
+		sinfo->signal = quality.level.data;
+		sinfo->filled |= STATION_INFO_SIGNAL;
+	}
+
+	return result;
+}
+
+int prism2_scan(struct wiphy *wiphy, struct net_device *dev,
+		struct cfg80211_scan_request *request)
+{
+	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
+	wlandevice_t *wlandev = dev->ml_priv;
+	struct p80211msg_dot11req_scan msg1;
+	struct p80211msg_dot11req_scan_results msg2;
+	int result;
+	int err = 0;
+	int numbss = 0;
+	int i = 0;
+	u8 ie_buf[46];
+	int ie_len;
+
+	if (!request)
+		return -EINVAL;
+
+	if (priv->scan_request && priv->scan_request != request)
+		return -EBUSY;
+
+	if (wlandev->macmode == WLAN_MACMODE_ESS_AP) {
+		printk(KERN_ERR "Can't scan in AP mode\n");
+		return -EOPNOTSUPP;
+	}
+
+	priv->scan_request = request;
+
+	memset(&msg1, 0x00, sizeof(struct p80211msg_dot11req_scan));
+	msg1.msgcode = DIDmsg_dot11req_scan;
+	msg1.bsstype.data = P80211ENUM_bsstype_any;
+
+	memset(&(msg1.bssid.data), 0xFF, sizeof(p80211item_pstr6_t));
+	msg1.bssid.data.len = 6;
+
+	if (request->n_ssids > 0) {
+		msg1.scantype.data = P80211ENUM_scantype_active;
+		msg1.ssid.data.len = request->ssids->ssid_len;
+		memcpy(msg1.ssid.data.data, request->ssids->ssid, request->ssids->ssid_len);
+	} else {
+		msg1.scantype.data = 0;
+	}
+	msg1.probedelay.data = 0;
+
+	for (i = 0;
+		(i < request->n_channels) && i < ARRAY_SIZE(prism2_channels);
+		i++)
+		msg1.channellist.data.data[i] =
+			ieee80211_frequency_to_channel(request->channels[i]->center_freq);
+	msg1.channellist.data.len = request->n_channels;
+
+	msg1.maxchanneltime.data = 250;
+	msg1.minchanneltime.data = 200;
+
+	result = p80211req_dorequest(wlandev, (u8 *) &msg1);
+	if (result) {
+		err = prism2_result2err(msg1.resultcode.data);
+		goto exit;
+	}
+	/* Now retrieve scan results */
+	numbss = msg1.numbss.data;
+
+	for (i = 0; i < numbss; i++) {
+		memset(&msg2, 0, sizeof(msg2));
+		msg2.msgcode = DIDmsg_dot11req_scan_results;
+		msg2.bssindex.data = i;
+
+		result = p80211req_dorequest(wlandev, (u8 *) &msg2);
+		if ((result != 0) ||
+		    (msg2.resultcode.data != P80211ENUM_resultcode_success)) {
+			break;
+		}
+
+		ie_buf[0] = WLAN_EID_SSID;
+		ie_buf[1] = msg2.ssid.data.len;
+		ie_len = ie_buf[1] + 2;
+		memcpy(&ie_buf[2], &(msg2.ssid.data.data), msg2.ssid.data.len);
+		cfg80211_inform_bss(wiphy,
+			ieee80211_get_channel(wiphy, ieee80211_dsss_chan_to_freq(msg2.dschannel.data)),
+			(const u8 *) &(msg2.bssid.data.data),
+			msg2.timestamp.data, msg2.capinfo.data,
+			msg2.beaconperiod.data,
+			ie_buf,
+			ie_len,
+			(msg2.signal.data - 65536) * 100, /* Conversion to signed type */
+			GFP_KERNEL
+		);
+	}
+
+	if (result)
+		err = prism2_result2err(msg2.resultcode.data);
+
+exit:
+	cfg80211_scan_done(request, err ? 1 : 0);
+	priv->scan_request = NULL;
+	return err;
+}
+
+int prism2_set_wiphy_params(struct wiphy *wiphy, u32 changed)
+{
+	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
+	wlandevice_t *wlandev = priv->wlandev;
+	u32 data;
+	int result;
+	int err = 0;
+
+	if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+		if (wiphy->rts_threshold == -1)
+			data = 2347;
+		else
+			data = wiphy->rts_threshold;
+
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold,
+						data);
+		if (result) {
+			err = -EFAULT;
+			goto exit;
+		}
+	}
+
+	if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+		if (wiphy->frag_threshold == -1)
+			data = 2346;
+		else
+			data = wiphy->frag_threshold;
+
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold,
+						data);
+		if (result) {
+			err = -EFAULT;
+			goto exit;
+		}
+	}
+
+exit:
+	return err;
+}
+
+int prism2_connect(struct wiphy *wiphy, struct net_device *dev,
+		   struct cfg80211_connect_params *sme)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	struct ieee80211_channel *channel = sme->channel;
+	struct p80211msg_lnxreq_autojoin msg_join;
+	u32 did;
+	int length = sme->ssid_len;
+	int chan = -1;
+	int is_wep = (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_WEP40) ||
+	    (sme->crypto.cipher_group == WLAN_CIPHER_SUITE_WEP104);
+	int result;
+	int err = 0;
+
+	/* Set the channel */
+	if (channel) {
+		chan = ieee80211_frequency_to_channel(channel->center_freq);
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel,
+						chan);
+		if (result)
+			goto exit;
+	}
+
+	/* Set the authorisation */
+	if ((sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM) ||
+		((sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) && !is_wep))
+			msg_join.authtype.data = P80211ENUM_authalg_opensystem;
+	else if ((sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY) ||
+		((sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC) && is_wep))
+			msg_join.authtype.data = P80211ENUM_authalg_sharedkey;
+	else
+		printk(KERN_WARNING
+			"Unhandled authorisation type for connect (%d)\n",
+			sme->auth_type);
+
+	/* Set the encryption - we only support wep */
+	if (is_wep) {
+		if (sme->key) {
+			result = prism2_domibset_uint32(wlandev,
+				DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
+				sme->key_idx);
+			if (result)
+				goto exit;
+
+			/* send key to driver */
+			switch (sme->key_idx) {
+			case 0:
+				did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
+				break;
+
+			case 1:
+				did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
+				break;
+
+			case 2:
+				did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
+				break;
+
+			case 3:
+				did = DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
+				break;
+
+			default:
+				err = -EINVAL;
+				goto exit;
+			}
+
+			result = prism2_domibset_pstr32(wlandev, did, sme->key_len, (u8 *) sme->key);
+			if (result)
+				goto exit;
+
+		}
+
+		/* Assume we should set privacy invoked and exclude unencrypted
+		   We could possibly use sme->privacy here, but the assumption
+		   seems reasonable anyway */
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
+						P80211ENUM_truth_true);
+		if (result)
+			goto exit;
+
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
+						P80211ENUM_truth_true);
+		if (result)
+			goto exit;
+
+	} else {
+		/* Assume we should unset privacy invoked
+		   and exclude unencrypted */
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
+						P80211ENUM_truth_false);
+		if (result)
+			goto exit;
+
+		result = prism2_domibset_uint32(wlandev,
+						DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
+						P80211ENUM_truth_false);
+		if (result)
+			goto exit;
+
+	}
+
+	/* Now do the actual join. Note there is no way that I can
+	   see to request a specific bssid */
+	msg_join.msgcode = DIDmsg_lnxreq_autojoin;
+
+	memcpy(msg_join.ssid.data.data, sme->ssid, length);
+	msg_join.ssid.data.len = length;
+
+	result = p80211req_dorequest(wlandev, (u8 *) &msg_join);
+
+exit:
+	if (result)
+		err = -EFAULT;
+
+	return err;
+}
+
+int prism2_disconnect(struct wiphy *wiphy, struct net_device *dev,
+		      u16 reason_code)
+{
+	wlandevice_t *wlandev = dev->ml_priv;
+	struct p80211msg_lnxreq_autojoin msg_join;
+	int result;
+	int err = 0;
+
+
+	/* Do a join, with a bogus ssid. Thats the only way I can think of */
+	msg_join.msgcode = DIDmsg_lnxreq_autojoin;
+
+	memcpy(msg_join.ssid.data.data, "---", 3);
+	msg_join.ssid.data.len = 3;
+
+	result = p80211req_dorequest(wlandev, (u8 *) &msg_join);
+
+	if (result)
+		err = -EFAULT;
+
+	return err;
+}
+
+
+int prism2_join_ibss(struct wiphy *wiphy, struct net_device *dev,
+		     struct cfg80211_ibss_params *params)
+{
+	return -EOPNOTSUPP;
+}
+
+int prism2_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
+{
+	return -EOPNOTSUPP;
+}
+
+
+int prism2_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type,
+			int mbm)
+{
+	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
+	wlandevice_t *wlandev = priv->wlandev;
+	u32 data;
+	int result;
+	int err = 0;
+
+	if (type == NL80211_TX_POWER_AUTOMATIC)
+		data = 30;
+	else
+		data = MBM_TO_DBM(mbm);
+
+	result = prism2_domibset_uint32(wlandev,
+		DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel,
+		data);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+exit:
+	return err;
+}
+
+int prism2_get_tx_power(struct wiphy *wiphy, int *dbm)
+{
+	struct prism2_wiphy_private *priv = wiphy_priv(wiphy);
+	wlandevice_t *wlandev = priv->wlandev;
+	struct p80211msg_dot11req_mibget msg;
+	p80211item_uint32_t *mibitem = (p80211item_uint32_t *) &msg.mibattribute.data;
+	int result;
+	int err = 0;
+
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem->did =
+	    DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel;
+
+	result = p80211req_dorequest(wlandev, (u8 *) &msg);
+
+	if (result) {
+		err = -EFAULT;
+		goto exit;
+	}
+
+	*dbm = mibitem->data;
+
+exit:
+	return err;
+}
+
+
+
+
+/* Interface callback functions, passing data back up to the cfg80211 layer */
+void prism2_connect_result(wlandevice_t *wlandev, u8 failed)
+{
+	u16 status = failed ? WLAN_STATUS_UNSPECIFIED_FAILURE : WLAN_STATUS_SUCCESS;
+
+	cfg80211_connect_result(wlandev->netdev, wlandev->bssid,
+				NULL, 0, NULL, 0, status, GFP_KERNEL);
+}
+
+void prism2_disconnected(wlandevice_t *wlandev)
+{
+	cfg80211_disconnected(wlandev->netdev, 0, NULL,
+		0, GFP_KERNEL);
+}
+
+void prism2_roamed(wlandevice_t *wlandev)
+{
+	cfg80211_roamed(wlandev->netdev, wlandev->bssid,
+		NULL, 0, NULL, 0, GFP_KERNEL);
+}
+
+
+/* Structures for declaring wiphy interface */
+static const struct cfg80211_ops prism2_usb_cfg_ops = {
+	.change_virtual_intf = prism2_change_virtual_intf,
+	.add_key = prism2_add_key,
+	.get_key = prism2_get_key,
+	.del_key = prism2_del_key,
+	.set_default_key = prism2_set_default_key,
+	.get_station = prism2_get_station,
+	.scan = prism2_scan,
+	.set_wiphy_params = prism2_set_wiphy_params,
+	.connect = prism2_connect,
+	.disconnect = prism2_disconnect,
+	.join_ibss = prism2_join_ibss,
+	.leave_ibss = prism2_leave_ibss,
+	.set_tx_power = prism2_set_tx_power,
+	.get_tx_power = prism2_get_tx_power,
+};
+
+
+/* Functions to create/free wiphy interface */
+struct wiphy *wlan_create_wiphy(struct device *dev, wlandevice_t *wlandev)
+{
+	struct wiphy *wiphy;
+	struct prism2_wiphy_private *priv;
+	wiphy = wiphy_new(&prism2_usb_cfg_ops, sizeof(struct prism2_wiphy_private));
+	if (!wiphy)
+		return NULL;
+
+	priv = wiphy_priv(wiphy);
+	priv->wlandev = wlandev;
+	memcpy(priv->channels, prism2_channels, sizeof(prism2_channels));
+	memcpy(priv->rates, prism2_rates, sizeof(prism2_rates));
+	priv->band.channels = priv->channels;
+	priv->band.n_channels = ARRAY_SIZE(prism2_channels);
+	priv->band.bitrates = priv->rates;
+	priv->band.n_bitrates = ARRAY_SIZE(prism2_rates);
+	wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
+
+	set_wiphy_dev(wiphy, dev);
+	wiphy->privid = prism2_wiphy_privid;
+	wiphy->max_scan_ssids = 1;
+	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
+				 | BIT(NL80211_IFTYPE_ADHOC);
+	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+	wiphy->n_cipher_suites = PRISM2_NUM_CIPHER_SUITES;
+	wiphy->cipher_suites = prism2_cipher_suites;
+
+	if (wiphy_register(wiphy) < 0)
+		return NULL;
+
+	return wiphy;
+}
+
+
+void wlan_free_wiphy(struct wiphy *wiphy)
+{
+	wiphy_unregister(wiphy);
+	wiphy_free(wiphy);
+}
diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h
index 1fa42e01e8c..fa94a7cc86c 100644
--- a/drivers/staging/wlan-ng/hfa384x.h
+++ b/drivers/staging/wlan-ng/hfa384x.h
@@ -1284,6 +1284,8 @@ typedef struct hfa384x {
 	u16 link_status_new;
 	struct sk_buff_head authq;
 
+	u32 txrate;
+
 	/* And here we have stuff that used to be in priv */
 
 	/* State variables */
@@ -1407,7 +1409,7 @@ int hfa384x_drvr_start(hfa384x_t *hw);
 int hfa384x_drvr_stop(hfa384x_t *hw);
 int
 hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb,
-		     p80211_hdr_t *p80211_hdr, p80211_metawep_t *p80211_wep);
+		     union p80211_hdr *p80211_hdr, struct p80211_metawep *p80211_wep);
 void hfa384x_tx_timeout(wlandevice_t *wlandev);
 
 int hfa384x_cmd_initialize(hfa384x_t *hw);
diff --git a/drivers/staging/wlan-ng/hfa384x_usb.c b/drivers/staging/wlan-ng/hfa384x_usb.c
index a41db5dc8c7..ea81cb547bb 100644
--- a/drivers/staging/wlan-ng/hfa384x_usb.c
+++ b/drivers/staging/wlan-ng/hfa384x_usb.c
@@ -2706,8 +2706,8 @@ int hfa384x_drvr_stop(hfa384x_t *hw)
 *	interrupt
 ----------------------------------------------------------------*/
 int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb,
-			 p80211_hdr_t *p80211_hdr,
-			 p80211_metawep_t *p80211_wep)
+			 union p80211_hdr *p80211_hdr,
+			 struct p80211_metawep *p80211_wep)
 {
 	int usbpktlen = sizeof(hfa384x_tx_frame_t);
 	int result;
@@ -2752,7 +2752,7 @@ int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb,
 
 	/* copy the header over to the txdesc */
 	memcpy(&(hw->txbuff.txfrm.desc.frame_control), p80211_hdr,
-	       sizeof(p80211_hdr_t));
+	       sizeof(union p80211_hdr));
 
 	/* if we're using host WEP, increase size by IV+ICV */
 	if (p80211_wep->data) {
@@ -2805,11 +2805,13 @@ void hfa384x_tx_timeout(wlandevice_t *wlandev)
 
 	spin_lock_irqsave(&hw->ctlxq.lock, flags);
 
-	if (!hw->wlandev->hwremoved &&
-	    /* Note the bitwise OR, not the logical OR. */
-	    (!test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) |
-	     !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags))) {
-		schedule_work(&hw->usb_work);
+	if (!hw->wlandev->hwremoved) {
+		int sched;
+
+		sched = !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags);
+		sched |= !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags);
+		if (sched)
+			schedule_work(&hw->usb_work);
 	}
 
 	spin_unlock_irqrestore(&hw->ctlxq.lock, flags);
@@ -3471,7 +3473,7 @@ static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
 	hfa384x_usbin_t *usbin = (hfa384x_usbin_t *) skb->data;
 	hfa384x_t *hw = wlandev->priv;
 	int hdrlen;
-	p80211_rxmeta_t *rxmeta;
+	struct p80211_rxmeta *rxmeta;
 	u16 data_len;
 	u16 fc;
 
@@ -3588,14 +3590,14 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 	datalen = le16_to_cpu(rxdesc->data_len);
 
 	/* Allocate an ind message+framesize skb */
-	skblen = sizeof(p80211_caphdr_t) + hdrlen + datalen + WLAN_CRC_LEN;
+	skblen = sizeof(struct p80211_caphdr) + hdrlen + datalen + WLAN_CRC_LEN;
 
 	/* sanity check the length */
 	if (skblen >
-	    (sizeof(p80211_caphdr_t) +
+	    (sizeof(struct p80211_caphdr) +
 	     WLAN_HDR_A4_LEN + WLAN_DATA_MAXLEN + WLAN_CRC_LEN)) {
 		pr_debug("overlen frm: len=%zd\n",
-			 skblen - sizeof(p80211_caphdr_t));
+			 skblen - sizeof(struct p80211_caphdr));
 	}
 
 	skb = dev_alloc_skb(skblen);
@@ -3609,13 +3611,13 @@ static void hfa384x_int_rxmonitor(wlandevice_t *wlandev,
 	/* only prepend the prism header if in the right mode */
 	if ((wlandev->netdev->type == ARPHRD_IEEE80211_PRISM) &&
 	    (hw->sniffhdr != 0)) {
-		p80211_caphdr_t *caphdr;
+		struct p80211_caphdr *caphdr;
 		/* The NEW header format! */
-		datap = skb_put(skb, sizeof(p80211_caphdr_t));
-		caphdr = (p80211_caphdr_t *) datap;
+		datap = skb_put(skb, sizeof(struct p80211_caphdr));
+		caphdr = (struct p80211_caphdr *) datap;
 
 		caphdr->version = htonl(P80211CAPTURE_VERSION);
-		caphdr->length = htonl(sizeof(p80211_caphdr_t));
+		caphdr->length = htonl(sizeof(struct p80211_caphdr));
 		caphdr->mactime = __cpu_to_be64(rxdesc->time) * 1000;
 		caphdr->hosttime = __cpu_to_be64(jiffies);
 		caphdr->phytype = htonl(4);	/* dss_dot11_b */
diff --git a/drivers/staging/wlan-ng/p80211conv.c b/drivers/staging/wlan-ng/p80211conv.c
index 059e15055b7..83879f9a0b7 100644
--- a/drivers/staging/wlan-ng/p80211conv.c
+++ b/drivers/staging/wlan-ng/p80211conv.c
@@ -103,15 +103,15 @@ static u8 oui_8021h[] = { 0x00, 0x00, 0xf8 };
 *	May be called in interrupt or non-interrupt context
 ----------------------------------------------------------------*/
 int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
-			struct sk_buff *skb, p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep)
+			struct sk_buff *skb, union p80211_hdr *p80211_hdr,
+			struct p80211_metawep *p80211_wep)
 {
 
 	u16 fc;
 	u16 proto;
-	wlan_ethhdr_t e_hdr;
-	wlan_llc_t *e_llc;
-	wlan_snap_t *e_snap;
+	struct wlan_ethhdr e_hdr;
+	struct wlan_llc *e_llc;
+	struct wlan_snap *e_snap;
 	int foo;
 
 	memcpy(&e_hdr, skb->data, sizeof(e_hdr));
@@ -148,7 +148,7 @@ int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
 
 			/* tack on SNAP */
 			e_snap =
-			    (wlan_snap_t *) skb_push(skb, sizeof(wlan_snap_t));
+			    (struct wlan_snap *) skb_push(skb, sizeof(struct wlan_snap));
 			e_snap->type = htons(proto);
 			if (ethconv == WLAN_ETHCONV_8021h
 			    && p80211_stt_findproto(proto)) {
@@ -161,7 +161,7 @@ int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
 
 			/* tack on llc */
 			e_llc =
-			    (wlan_llc_t *) skb_push(skb, sizeof(wlan_llc_t));
+			    (struct wlan_llc *) skb_push(skb, sizeof(struct wlan_llc));
 			e_llc->dsap = 0xAA;	/* SNAP, see IEEE 802 */
 			e_llc->ssap = 0xAA;
 			e_llc->ctl = 0x03;
@@ -230,7 +230,7 @@ int skb_ether_to_p80211(wlandevice_t *wlandev, u32 ethconv,
 
 /* jkriegl: from orinoco, modified */
 static void orinoco_spy_gather(wlandevice_t *wlandev, char *mac,
-			       p80211_rxmeta_t *rxmeta)
+			       struct p80211_rxmeta *rxmeta)
 {
 	int i;
 
@@ -280,17 +280,17 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 	unsigned int payload_offset;
 	u8 daddr[WLAN_ETHADDR_LEN];
 	u8 saddr[WLAN_ETHADDR_LEN];
-	p80211_hdr_t *w_hdr;
-	wlan_ethhdr_t *e_hdr;
-	wlan_llc_t *e_llc;
-	wlan_snap_t *e_snap;
+	union p80211_hdr *w_hdr;
+	struct wlan_ethhdr *e_hdr;
+	struct wlan_llc *e_llc;
+	struct wlan_snap *e_snap;
 
 	int foo;
 
 	payload_length = skb->len - WLAN_HDR_A3_LEN - WLAN_CRC_LEN;
 	payload_offset = WLAN_HDR_A3_LEN;
 
-	w_hdr = (p80211_hdr_t *) skb->data;
+	w_hdr = (union p80211_hdr *) skb->data;
 
 	/* setup some vars for convenience */
 	fc = le16_to_cpu(w_hdr->a3.fc);
@@ -345,14 +345,14 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		wlandev->rx.decrypt++;
 	}
 
-	e_hdr = (wlan_ethhdr_t *) (skb->data + payload_offset);
+	e_hdr = (struct wlan_ethhdr *) (skb->data + payload_offset);
 
-	e_llc = (wlan_llc_t *) (skb->data + payload_offset);
+	e_llc = (struct wlan_llc *) (skb->data + payload_offset);
 	e_snap =
-	    (wlan_snap_t *) (skb->data + payload_offset + sizeof(wlan_llc_t));
+	    (struct wlan_snap *) (skb->data + payload_offset + sizeof(struct wlan_llc));
 
 	/* Test for the various encodings */
-	if ((payload_length >= sizeof(wlan_ethhdr_t)) &&
+	if ((payload_length >= sizeof(struct wlan_ethhdr)) &&
 	    (e_llc->dsap != 0xaa || e_llc->ssap != 0xaa) &&
 	    ((memcmp(daddr, e_hdr->daddr, WLAN_ETHADDR_LEN) == 0) ||
 	     (memcmp(saddr, e_hdr->saddr, WLAN_ETHADDR_LEN) == 0))) {
@@ -372,7 +372,7 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		/* chop off the 802.11 CRC */
 		skb_trim(skb, skb->len - WLAN_CRC_LEN);
 
-	} else if ((payload_length >= sizeof(wlan_llc_t) + sizeof(wlan_snap_t))
+	} else if ((payload_length >= sizeof(struct wlan_llc) + sizeof(struct wlan_snap))
 		   && (e_llc->dsap == 0xaa) && (e_llc->ssap == 0xaa)
 		   && (e_llc->ctl == 0x03)
 		   &&
@@ -398,7 +398,7 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		skb_pull(skb, payload_offset);
 
 		/* create 802.3 header at beginning of skb. */
-		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		e_hdr = (struct wlan_ethhdr *) skb_push(skb, WLAN_ETHHDR_LEN);
 		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
 		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
 		e_hdr->type = htons(payload_length);
@@ -406,7 +406,7 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		/* chop off the 802.11 CRC */
 		skb_trim(skb, skb->len - WLAN_CRC_LEN);
 
-	} else if ((payload_length >= sizeof(wlan_llc_t) + sizeof(wlan_snap_t))
+	} else if ((payload_length >= sizeof(struct wlan_llc) + sizeof(struct wlan_snap))
 		   && (e_llc->dsap == 0xaa) && (e_llc->ssap == 0xaa)
 		   && (e_llc->ctl == 0x03)) {
 		pr_debug("802.1h/RFC1042 len: %d\n", payload_length);
@@ -414,13 +414,13 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		/* build a DIXII + RFC894 */
 
 		/* Test for an overlength frame */
-		if ((payload_length - sizeof(wlan_llc_t) - sizeof(wlan_snap_t))
+		if ((payload_length - sizeof(struct wlan_llc) - sizeof(struct wlan_snap))
 		    > netdev->mtu) {
 			/* A bogus length ethfrm has been sent. */
 			/* Is someone trying an oflow attack? */
 			printk(KERN_ERR "DIXII frame too large (%ld > %d)\n",
-			       (long int)(payload_length - sizeof(wlan_llc_t) -
-					  sizeof(wlan_snap_t)), netdev->mtu);
+			       (long int)(payload_length - sizeof(struct wlan_llc) -
+					  sizeof(struct wlan_snap)), netdev->mtu);
 			return 1;
 		}
 
@@ -428,13 +428,13 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		skb_pull(skb, payload_offset);
 
 		/* chop llc header from skb. */
-		skb_pull(skb, sizeof(wlan_llc_t));
+		skb_pull(skb, sizeof(struct wlan_llc));
 
 		/* chop snap header from skb. */
-		skb_pull(skb, sizeof(wlan_snap_t));
+		skb_pull(skb, sizeof(struct wlan_snap));
 
 		/* create 802.3 header at beginning of skb. */
-		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		e_hdr = (struct wlan_ethhdr *) skb_push(skb, WLAN_ETHHDR_LEN);
 		e_hdr->type = e_snap->type;
 		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
 		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
@@ -461,7 +461,7 @@ int skb_p80211_to_ether(wlandevice_t *wlandev, u32 ethconv,
 		skb_pull(skb, payload_offset);
 
 		/* create 802.3 header at beginning of skb. */
-		e_hdr = (wlan_ethhdr_t *) skb_push(skb, WLAN_ETHHDR_LEN);
+		e_hdr = (struct wlan_ethhdr *) skb_push(skb, WLAN_ETHHDR_LEN);
 		memcpy(e_hdr->daddr, daddr, WLAN_ETHADDR_LEN);
 		memcpy(e_hdr->saddr, saddr, WLAN_ETHADDR_LEN);
 		e_hdr->type = htons(payload_length);
@@ -542,8 +542,8 @@ int p80211_stt_findproto(u16 proto)
 ----------------------------------------------------------------*/
 void p80211skb_rxmeta_detach(struct sk_buff *skb)
 {
-	p80211_rxmeta_t *rxmeta;
-	p80211_frmmeta_t *frmmeta;
+	struct p80211_rxmeta *rxmeta;
+	struct p80211_frmmeta *frmmeta;
 
 	/* Sanity checks */
 	if (skb == NULL) {	/* bad skb */
@@ -589,8 +589,8 @@ exit:
 int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb)
 {
 	int result = 0;
-	p80211_rxmeta_t *rxmeta;
-	p80211_frmmeta_t *frmmeta;
+	struct p80211_rxmeta *rxmeta;
+	struct p80211_frmmeta *frmmeta;
 
 	/* If these already have metadata, we error out! */
 	if (P80211SKB_RXMETA(skb) != NULL) {
@@ -601,7 +601,7 @@ int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb)
 	}
 
 	/* Allocate the rxmeta */
-	rxmeta = kzalloc(sizeof(p80211_rxmeta_t), GFP_ATOMIC);
+	rxmeta = kzalloc(sizeof(struct p80211_rxmeta), GFP_ATOMIC);
 
 	if (rxmeta == NULL) {
 		printk(KERN_ERR "%s: Failed to allocate rxmeta.\n",
@@ -615,8 +615,8 @@ int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb)
 	rxmeta->hosttime = jiffies;
 
 	/* Overlay a frmmeta_t onto skb->cb */
-	memset(skb->cb, 0, sizeof(p80211_frmmeta_t));
-	frmmeta = (p80211_frmmeta_t *) (skb->cb);
+	memset(skb->cb, 0, sizeof(struct p80211_frmmeta));
+	frmmeta = (struct p80211_frmmeta *) (skb->cb);
 	frmmeta->magic = P80211_FRMMETA_MAGIC;
 	frmmeta->rx = rxmeta;
 exit:
@@ -641,7 +641,7 @@ exit:
 ----------------------------------------------------------------*/
 void p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb)
 {
-	p80211_frmmeta_t *meta;
+	struct p80211_frmmeta *meta;
 
 	meta = P80211SKB_FRMMETA(skb);
 	if (meta && meta->rx)
diff --git a/drivers/staging/wlan-ng/p80211conv.h b/drivers/staging/wlan-ng/p80211conv.h
index 6fe163be24f..eca0391c676 100644
--- a/drivers/staging/wlan-ng/p80211conv.h
+++ b/drivers/staging/wlan-ng/p80211conv.h
@@ -63,17 +63,17 @@
 
 #define P80211CAPTURE_VERSION	0x80211001
 
-#define	P80211_FRMMETA_MAGIC		0x802110
+#define	P80211_FRMMETA_MAGIC	0x802110
 
 #define P80211SKB_FRMMETA(s) \
-	(((((p80211_frmmeta_t *)((s)->cb))->magic) == P80211_FRMMETA_MAGIC) ? \
-		((p80211_frmmeta_t *)((s)->cb)) : \
+	(((((struct p80211_frmmeta *)((s)->cb))->magic) == P80211_FRMMETA_MAGIC) ? \
+		((struct p80211_frmmeta *)((s)->cb)) : \
 		(NULL))
 
 #define P80211SKB_RXMETA(s) \
-	(P80211SKB_FRMMETA((s)) ?  P80211SKB_FRMMETA((s))->rx : ((p80211_rxmeta_t *)(NULL)))
+	(P80211SKB_FRMMETA((s)) ?  P80211SKB_FRMMETA((s))->rx : ((struct p80211_rxmeta *)(NULL)))
 
-typedef struct p80211_rxmeta {
+struct p80211_rxmeta {
 	struct wlandevice *wlandev;
 
 	u64 mactime;		/* Hi-rez MAC-supplied time value */
@@ -87,12 +87,12 @@ typedef struct p80211_rxmeta {
 	unsigned int preamble;	/* P80211ENUM_preambletype_* */
 	unsigned int encoding;	/* P80211ENUM_encoding_* */
 
-} p80211_rxmeta_t;
+};
 
-typedef struct p80211_frmmeta {
+struct p80211_frmmeta {
 	unsigned int magic;
-	p80211_rxmeta_t *rx;
-} p80211_frmmeta_t;
+	struct p80211_rxmeta *rx;
+};
 
 void p80211skb_free(struct wlandevice *wlandev, struct sk_buff *skb);
 int p80211skb_rxmeta_attach(struct wlandevice *wlandev, struct sk_buff *skb);
@@ -101,7 +101,7 @@ void p80211skb_rxmeta_detach(struct sk_buff *skb);
 /*
  * Frame capture header.  (See doc/capturefrm.txt)
  */
-typedef struct p80211_caphdr {
+struct p80211_caphdr {
 	u32 version;
 	u32 length;
 	u64 mactime;
@@ -116,36 +116,36 @@ typedef struct p80211_caphdr {
 	s32 ssi_noise;
 	u32 preamble;
 	u32 encoding;
-} p80211_caphdr_t;
+};
 
 /* buffer free method pointer type */
 typedef void (*freebuf_method_t) (void *buf, int size);
 
-typedef struct p80211_metawep {
+struct p80211_metawep {
 	void *data;
 	u8 iv[4];
 	u8 icv[4];
-} p80211_metawep_t;
+};
 
 /* local ether header type */
-typedef struct wlan_ethhdr {
+struct wlan_ethhdr {
 	u8 daddr[WLAN_ETHADDR_LEN];
 	u8 saddr[WLAN_ETHADDR_LEN];
 	u16 type;
-} __attribute__ ((packed)) wlan_ethhdr_t;
+} __attribute__ ((packed));
 
 /* local llc header type */
-typedef struct wlan_llc {
+struct wlan_llc {
 	u8 dsap;
 	u8 ssap;
 	u8 ctl;
-} __attribute__ ((packed)) wlan_llc_t;
+} __attribute__ ((packed));
 
 /* local snap header type */
-typedef struct wlan_snap {
+struct wlan_snap {
 	u8 oui[WLAN_IEEE_OUI_LEN];
 	u16 type;
-} __attribute__ ((packed)) wlan_snap_t;
+} __attribute__ ((packed));
 
 /* Circular include trick */
 struct wlandevice;
@@ -153,8 +153,8 @@ struct wlandevice;
 int skb_p80211_to_ether(struct wlandevice *wlandev, u32 ethconv,
 			struct sk_buff *skb);
 int skb_ether_to_p80211(struct wlandevice *wlandev, u32 ethconv,
-			struct sk_buff *skb, p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep);
+			struct sk_buff *skb, union p80211_hdr *p80211_hdr,
+			struct p80211_metawep *p80211_wep);
 
 int p80211_stt_findproto(u16 proto);
 
diff --git a/drivers/staging/wlan-ng/p80211hdr.h b/drivers/staging/wlan-ng/p80211hdr.h
index 419de4dee56..1f6e4ebc6eb 100644
--- a/drivers/staging/wlan-ng/p80211hdr.h
+++ b/drivers/staging/wlan-ng/p80211hdr.h
@@ -94,7 +94,7 @@
 
 /* Control */
 #define WLAN_FSTYPE_BLOCKACKREQ		0x8
-#define WLAN_FSTYPE_BLOCKACK  		0x9
+#define WLAN_FSTYPE_BLOCKACK		0x9
 #define WLAN_FSTYPE_PSPOLL		0x0a
 #define WLAN_FSTYPE_RTS			0x0b
 #define WLAN_FSTYPE_CTS			0x0c
@@ -133,13 +133,13 @@
 
 #define WLAN_GET_FC_FTYPE(n)	((((u16)(n)) & (BIT(2) | BIT(3))) >> 2)
 #define WLAN_GET_FC_FSTYPE(n)	((((u16)(n)) & (BIT(4)|BIT(5)|BIT(6)|BIT(7))) >> 4)
-#define WLAN_GET_FC_TODS(n) 	((((u16)(n)) & (BIT(8))) >> 8)
+#define WLAN_GET_FC_TODS(n)	((((u16)(n)) & (BIT(8))) >> 8)
 #define WLAN_GET_FC_FROMDS(n)	((((u16)(n)) & (BIT(9))) >> 9)
 #define WLAN_GET_FC_ISWEP(n)	((((u16)(n)) & (BIT(14))) >> 14)
 
 #define WLAN_SET_FC_FTYPE(n)	(((u16)(n)) << 2)
 #define WLAN_SET_FC_FSTYPE(n)	(((u16)(n)) << 4)
-#define WLAN_SET_FC_TODS(n) 	(((u16)(n)) << 8)
+#define WLAN_SET_FC_TODS(n)	(((u16)(n)) << 8)
 #define WLAN_SET_FC_FROMDS(n)	(((u16)(n)) << 9)
 #define WLAN_SET_FC_ISWEP(n)	(((u16)(n)) << 14)
 
@@ -147,16 +147,16 @@
 
 /* Generic 802.11 Header types */
 
-typedef struct p80211_hdr_a3 {
+struct p80211_hdr_a3 {
 	u16 fc;
 	u16 dur;
 	u8 a1[ETH_ALEN];
 	u8 a2[ETH_ALEN];
 	u8 a3[ETH_ALEN];
 	u16 seq;
-} __attribute__ ((packed)) p80211_hdr_a3_t;
+} __attribute__ ((packed));
 
-typedef struct p80211_hdr_a4 {
+struct p80211_hdr_a4 {
 	u16 fc;
 	u16 dur;
 	u8 a1[ETH_ALEN];
@@ -164,18 +164,18 @@ typedef struct p80211_hdr_a4 {
 	u8 a3[ETH_ALEN];
 	u16 seq;
 	u8 a4[ETH_ALEN];
-} __attribute__ ((packed)) p80211_hdr_a4_t;
+} __attribute__ ((packed));
 
-typedef union p80211_hdr {
-	p80211_hdr_a3_t a3;
-	p80211_hdr_a4_t a4;
-} __attribute__ ((packed)) p80211_hdr_t;
+union p80211_hdr {
+	struct p80211_hdr_a3 a3;
+	struct p80211_hdr_a4 a4;
+} __attribute__ ((packed));
 
 /* Frame and header length macros */
 
 #define WLAN_CTL_FRAMELEN(fstype) (\
 	(fstype) == WLAN_FSTYPE_BLOCKACKREQ	? 24 : \
-	(fstype) == WLAN_FSTYPE_BLOCKACK   	? 152 : \
+	(fstype) == WLAN_FSTYPE_BLOCKACK	? 152 : \
 	(fstype) == WLAN_FSTYPE_PSPOLL		? 20 : \
 	(fstype) == WLAN_FSTYPE_RTS		? 20 : \
 	(fstype) == WLAN_FSTYPE_CTS		? 14 : \
diff --git a/drivers/staging/wlan-ng/p80211ioctl.h b/drivers/staging/wlan-ng/p80211ioctl.h
index 64ca7f95262..0d47765452e 100644
--- a/drivers/staging/wlan-ng/p80211ioctl.h
+++ b/drivers/staging/wlan-ng/p80211ioctl.h
@@ -78,12 +78,12 @@
 /*  argument to the ioctl system call when issuing a request to */
 /*  the p80211 module. */
 
-typedef struct p80211ioctl_req {
+struct p80211ioctl_req {
 	char name[WLAN_DEVNAMELEN_MAX];
 	caddr_t data;
 	u32 magic;
 	u16 len;
 	u32 result;
-} __attribute__ ((packed)) p80211ioctl_req_t;
+} __attribute__ ((packed));
 
 #endif /* _P80211IOCTL_H */
diff --git a/drivers/staging/wlan-ng/p80211meta.h b/drivers/staging/wlan-ng/p80211meta.h
index b9badcff681..c5f1a63add9 100644
--- a/drivers/staging/wlan-ng/p80211meta.h
+++ b/drivers/staging/wlan-ng/p80211meta.h
@@ -62,7 +62,7 @@
 /* representation of category list metadata, group list metadata, */
 /* and data item metadata for both Mib and Messages. */
 
-typedef struct p80211meta {
+struct p80211meta {
 	char *name;		/* data item name */
 	u32 did;		/* partial did */
 	u32 flags;		/* set of various flag bits */
@@ -75,16 +75,16 @@ typedef struct p80211meta {
 	p80211_totext_t totextptr;	/* ptr to totext conversion function */
 	p80211_fromtext_t fromtextptr;	/* ptr to totext conversion function */
 	p80211_valid_t validfunptr;	/* ptr to totext conversion function */
-} p80211meta_t;
+};
 
-typedef struct grplistitem {
+struct grplistitem {
 	char *name;
-	p80211meta_t *itemlist;
-} grplistitem_t;
+	struct p80211meta *itemlist;
+};
 
-typedef struct catlistitem {
+struct catlistitem {
 	char *name;
-	grplistitem_t *grplist;
-} catlistitem_t;
+	struct grplistitem *grplist;
+};
 
 #endif /* _P80211META_H */
diff --git a/drivers/staging/wlan-ng/p80211metastruct.h b/drivers/staging/wlan-ng/p80211metastruct.h
index db12713eeaa..a8a4e3b5ffe 100644
--- a/drivers/staging/wlan-ng/p80211metastruct.h
+++ b/drivers/staging/wlan-ng/p80211metastruct.h
@@ -47,23 +47,23 @@
 #ifndef _P80211MKMETASTRUCT_H
 #define _P80211MKMETASTRUCT_H
 
-typedef struct p80211msg_dot11req_mibget {
+struct p80211msg_dot11req_mibget {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_unk392_t mibattribute;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_dot11req_mibget_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_dot11req_mibset {
+struct p80211msg_dot11req_mibset {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_unk392_t mibattribute;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_dot11req_mibset_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_dot11req_scan {
+struct p80211msg_dot11req_scan {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -81,9 +81,9 @@ typedef struct p80211msg_dot11req_scan {
 	p80211item_uint32_t resultcode;
 	p80211item_uint32_t numbss;
 	p80211item_uint32_t append;
-} __attribute__ ((packed)) p80211msg_dot11req_scan_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_dot11req_scan_results {
+struct p80211msg_dot11req_scan_results {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -113,6 +113,7 @@ typedef struct p80211msg_dot11req_scan_results {
 	p80211item_uint32_t cfpollable;
 	p80211item_uint32_t cfpollreq;
 	p80211item_uint32_t privacy;
+	p80211item_uint32_t capinfo;
 	p80211item_uint32_t basicrate1;
 	p80211item_uint32_t basicrate2;
 	p80211item_uint32_t basicrate3;
@@ -129,9 +130,9 @@ typedef struct p80211msg_dot11req_scan_results {
 	p80211item_uint32_t supprate6;
 	p80211item_uint32_t supprate7;
 	p80211item_uint32_t supprate8;
-} __attribute__ ((packed)) p80211msg_dot11req_scan_results_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_dot11req_start {
+struct p80211msg_dot11req_start {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -167,17 +168,17 @@ typedef struct p80211msg_dot11req_start {
 	p80211item_uint32_t operationalrate7;
 	p80211item_uint32_t operationalrate8;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_dot11req_start_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_lnxreq_ifstate {
+struct p80211msg_lnxreq_ifstate {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_uint32_t ifstate;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_lnxreq_ifstate_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_lnxreq_wlansniff {
+struct p80211msg_lnxreq_wlansniff {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -189,18 +190,18 @@ typedef struct p80211msg_lnxreq_wlansniff {
 	p80211item_uint32_t stripfcs;
 	p80211item_uint32_t packet_trunc;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_lnxreq_wlansniff_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_lnxreq_hostwep {
+struct p80211msg_lnxreq_hostwep {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_uint32_t resultcode;
 	p80211item_uint32_t decrypt;
 	p80211item_uint32_t encrypt;
-} __attribute__ ((packed)) p80211msg_lnxreq_hostwep_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_lnxreq_commsquality {
+struct p80211msg_lnxreq_commsquality {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -209,9 +210,10 @@ typedef struct p80211msg_lnxreq_commsquality {
 	p80211item_uint32_t link;
 	p80211item_uint32_t level;
 	p80211item_uint32_t noise;
-} __attribute__ ((packed)) p80211msg_lnxreq_commsquality_t;
+	p80211item_uint32_t txrate;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_lnxreq_autojoin {
+struct p80211msg_lnxreq_autojoin {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -219,26 +221,26 @@ typedef struct p80211msg_lnxreq_autojoin {
 	u8 pad_19D[3];
 	p80211item_uint32_t authtype;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_lnxreq_autojoin_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_p2req_readpda {
+struct p80211msg_p2req_readpda {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_unk1024_t pda;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_p2req_readpda_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_p2req_ramdl_state {
+struct p80211msg_p2req_ramdl_state {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_uint32_t enable;
 	p80211item_uint32_t exeaddr;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_p2req_ramdl_state_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_p2req_ramdl_write {
+struct p80211msg_p2req_ramdl_write {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -246,17 +248,17 @@ typedef struct p80211msg_p2req_ramdl_write {
 	p80211item_uint32_t len;
 	p80211item_unk4096_t data;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_p2req_ramdl_write_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_p2req_flashdl_state {
+struct p80211msg_p2req_flashdl_state {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
 	p80211item_uint32_t enable;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_p2req_flashdl_state_t;
+} __attribute__ ((packed));
 
-typedef struct p80211msg_p2req_flashdl_write {
+struct p80211msg_p2req_flashdl_write {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
@@ -264,6 +266,6 @@ typedef struct p80211msg_p2req_flashdl_write {
 	p80211item_uint32_t len;
 	p80211item_unk4096_t data;
 	p80211item_uint32_t resultcode;
-} __attribute__ ((packed)) p80211msg_p2req_flashdl_write_t;
+} __attribute__ ((packed));
 
 #endif
diff --git a/drivers/staging/wlan-ng/p80211mgmt.h b/drivers/staging/wlan-ng/p80211mgmt.h
index deb52f5fd78..3b5e8113ad1 100644
--- a/drivers/staging/wlan-ng/p80211mgmt.h
+++ b/drivers/staging/wlan-ng/p80211mgmt.h
@@ -298,7 +298,7 @@ typedef struct wlan_fr_mgmt {
 	u16 type;
 	u16 len;		/* DOES NOT include CRC !!!! */
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -310,7 +310,7 @@ typedef struct wlan_fr_beacon {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -333,7 +333,7 @@ typedef struct wlan_fr_ibssatim {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 
@@ -349,7 +349,7 @@ typedef struct wlan_fr_disassoc {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -364,7 +364,7 @@ typedef struct wlan_fr_assocreq {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -381,7 +381,7 @@ typedef struct wlan_fr_assocresp {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -398,7 +398,7 @@ typedef struct wlan_fr_reassocreq {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -416,7 +416,7 @@ typedef struct wlan_fr_reassocresp {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -433,7 +433,7 @@ typedef struct wlan_fr_probereq {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -448,7 +448,7 @@ typedef struct wlan_fr_proberesp {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -469,7 +469,7 @@ typedef struct wlan_fr_authen {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
@@ -486,7 +486,7 @@ typedef struct wlan_fr_deauthen {
 	u16 type;
 	u16 len;
 	u8 *buf;
-	p80211_hdr_t *hdr;
+	union p80211_hdr *hdr;
 	/* used for target specific data, skb in Linux */
 	void *priv;
 	/*-- fixed fields -----------*/
diff --git a/drivers/staging/wlan-ng/p80211msg.h b/drivers/staging/wlan-ng/p80211msg.h
index c691d3eeb9d..8e0f9a0cd74 100644
--- a/drivers/staging/wlan-ng/p80211msg.h
+++ b/drivers/staging/wlan-ng/p80211msg.h
@@ -50,10 +50,10 @@
 
 #define WLAN_DEVNAMELEN_MAX	16
 
-typedef struct p80211msg {
+struct p80211msg {
 	u32 msgcode;
 	u32 msglen;
 	u8 devname[WLAN_DEVNAMELEN_MAX];
-} __attribute__ ((packed)) p80211msg_t;
+} __attribute__ ((packed));
 
 #endif /* _P80211MSG_H */
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index 763ab1187a1..aa1792c8429 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -75,6 +75,7 @@
 
 #include <net/iw_handler.h>
 #include <net/net_namespace.h>
+#include <net/cfg80211.h>
 
 #include "p80211types.h"
 #include "p80211hdr.h"
@@ -87,6 +88,8 @@
 #include "p80211metastruct.h"
 #include "p80211metadef.h"
 
+#include "cfg80211.c"
+
 /* Support functions */
 static void p80211netdev_rx_bh(unsigned long arg);
 
@@ -261,7 +264,7 @@ static void p80211netdev_rx_bh(unsigned long arg)
 	wlandevice_t *wlandev = (wlandevice_t *) arg;
 	struct sk_buff *skb = NULL;
 	netdevice_t *dev = wlandev->netdev;
-	p80211_hdr_a3_t *hdr;
+	struct p80211_hdr_a3 *hdr;
 	u16 fc;
 
 	/* Let's empty our our queue */
@@ -285,7 +288,7 @@ static void p80211netdev_rx_bh(unsigned long arg)
 				netif_rx_ni(skb);
 				continue;
 			} else {
-				hdr = (p80211_hdr_a3_t *) skb->data;
+				hdr = (struct p80211_hdr_a3 *) skb->data;
 				fc = le16_to_cpu(hdr->fc);
 				if (p80211_rx_typedrop(wlandev, fc)) {
 					dev_kfree_skb(skb);
@@ -347,8 +350,8 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 	int result = 0;
 	int txresult = -1;
 	wlandevice_t *wlandev = netdev->ml_priv;
-	p80211_hdr_t p80211_hdr;
-	p80211_metawep_t p80211_wep;
+	union p80211_hdr p80211_hdr;
+	struct p80211_metawep p80211_wep;
 
 	if (skb == NULL)
 		return NETDEV_TX_OK;
@@ -358,8 +361,8 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 		goto failed;
 	}
 
-	memset(&p80211_hdr, 0, sizeof(p80211_hdr_t));
-	memset(&p80211_wep, 0, sizeof(p80211_metawep_t));
+	memset(&p80211_hdr, 0, sizeof(union p80211_hdr));
+	memset(&p80211_wep, 0, sizeof(struct p80211_metawep));
 
 	if (netif_queue_stopped(netdev)) {
 		pr_debug("called when queue stopped.\n");
@@ -398,8 +401,8 @@ static int p80211knetdev_hard_start_xmit(struct sk_buff *skb,
 			goto failed;
 		}
 		/* move the header over */
-		memcpy(&p80211_hdr, skb->data, sizeof(p80211_hdr_t));
-		skb_pull(skb, sizeof(p80211_hdr_t));
+		memcpy(&p80211_hdr, skb->data, sizeof(union p80211_hdr));
+		skb_pull(skb, sizeof(union p80211_hdr));
 	} else {
 		if (skb_ether_to_p80211
 		    (wlandev, wlandev->ethconv, skb, &p80211_hdr,
@@ -557,7 +560,7 @@ static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
 static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 {
 	int result = 0;
-	p80211ioctl_req_t *req = (p80211ioctl_req_t *) ifr;
+	struct p80211ioctl_req *req = (struct p80211ioctl_req *) ifr;
 	wlandevice_t *wlandev = dev->ml_priv;
 	u8 *msgbuf;
 
@@ -604,7 +607,8 @@ static int p80211knetdev_do_ioctl(netdevice_t *dev, struct ifreq *ifr, int cmd)
 		result = -ENOMEM;
 	}
 bail:
-	return result;		/* If allocate,copyfrom or copyto fails, return errno */
+	/* If allocate,copyfrom or copyto fails, return errno */
+	return result;
 }
 
 /*----------------------------------------------------------------
@@ -635,7 +639,7 @@ bail:
 static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 {
 	struct sockaddr *new_addr = addr;
-	p80211msg_dot11req_mibset_t dot11req;
+	struct p80211msg_dot11req_mibset dot11req;
 	p80211item_unk392_t *mibattr;
 	p80211item_pstr6_t *macaddr;
 	p80211item_uint32_t *resultcode;
@@ -651,9 +655,9 @@ static int p80211knetdev_set_mac_address(netdevice_t *dev, void *addr)
 	resultcode = &dot11req.resultcode;
 
 	/* Set up a dot11req_mibset */
-	memset(&dot11req, 0, sizeof(p80211msg_dot11req_mibset_t));
+	memset(&dot11req, 0, sizeof(struct p80211msg_dot11req_mibset));
 	dot11req.msgcode = DIDmsg_dot11req_mibset;
-	dot11req.msglen = sizeof(p80211msg_dot11req_mibset_t);
+	dot11req.msglen = sizeof(struct p80211msg_dot11req_mibset);
 	memcpy(dot11req.devname,
 	       ((wlandevice_t *) dev->ml_priv)->name, WLAN_DEVNAMELEN_MAX - 1);
 
@@ -732,6 +736,7 @@ static const struct net_device_ops p80211_netdev_ops = {
 * Arguments:
 *	wlandev		ptr to the wlandev structure for the
 *			interface.
+*	physdev		ptr to usb device
 * Returns:
 *	zero on success, non-zero otherwise.
 * Call Context:
@@ -740,10 +745,12 @@ static const struct net_device_ops p80211_netdev_ops = {
 *	compiled drivers, this function will be called in the
 *	context of the kernel startup code.
 ----------------------------------------------------------------*/
-int wlan_setup(wlandevice_t *wlandev)
+int wlan_setup(wlandevice_t *wlandev, struct device *physdev)
 {
 	int result = 0;
-	netdevice_t *dev;
+	netdevice_t *netdev;
+	struct wiphy *wiphy;
+	struct wireless_dev *wdev;
 
 	/* Set up the wlandev */
 	wlandev->state = WLAN_DEVICE_CLOSED;
@@ -755,20 +762,30 @@ int wlan_setup(wlandevice_t *wlandev)
 	tasklet_init(&wlandev->rx_bh,
 		     p80211netdev_rx_bh, (unsigned long)wlandev);
 
+	/* Allocate and initialize the wiphy struct */
+	wiphy = wlan_create_wiphy(physdev, wlandev);
+	if (wiphy == NULL) {
+		printk(KERN_ERR "Failed to alloc wiphy.\n");
+		return 1;
+	}
+
 	/* Allocate and initialize the struct device */
-	dev = alloc_netdev(0, "wlan%d", ether_setup);
-	if (dev == NULL) {
+	netdev = alloc_netdev(sizeof(struct wireless_dev), "wlan%d", ether_setup);
+	if (netdev == NULL) {
 		printk(KERN_ERR "Failed to alloc netdev.\n");
+		wlan_free_wiphy(wiphy);
 		result = 1;
 	} else {
-		wlandev->netdev = dev;
-		dev->ml_priv = wlandev;
-		dev->netdev_ops = &p80211_netdev_ops;
-
-		dev->wireless_handlers = &p80211wext_handler_def;
-
-		netif_stop_queue(dev);
-		netif_carrier_off(dev);
+		wlandev->netdev = netdev;
+		netdev->ml_priv = wlandev;
+		netdev->netdev_ops = &p80211_netdev_ops;
+		wdev = netdev_priv(netdev);
+		wdev->wiphy = wiphy;
+		wdev->iftype = NL80211_IFTYPE_STATION;
+		netdev->ieee80211_ptr = wdev;
+
+		netif_stop_queue(netdev);
+		netif_carrier_off(netdev);
 	}
 
 	return result;
@@ -797,14 +814,14 @@ int wlan_setup(wlandevice_t *wlandev)
 ----------------------------------------------------------------*/
 int wlan_unsetup(wlandevice_t *wlandev)
 {
-	int result = 0;
+	struct wireless_dev *wdev;
 
 	tasklet_kill(&wlandev->rx_bh);
 
-	if (wlandev->netdev == NULL) {
-		printk(KERN_ERR "called without wlandev->netdev set.\n");
-		result = 1;
-	} else {
+	if (wlandev->netdev) {
+		wdev = netdev_priv(wlandev->netdev);
+		if (wdev->wiphy)
+			wlan_free_wiphy(wdev->wiphy);
 		free_netdev(wlandev->netdev);
 		wlandev->netdev = NULL;
 	}
diff --git a/drivers/staging/wlan-ng/p80211netdev.h b/drivers/staging/wlan-ng/p80211netdev.h
index 3c8c6480056..1ec33740f10 100644
--- a/drivers/staging/wlan-ng/p80211netdev.h
+++ b/drivers/staging/wlan-ng/p80211netdev.h
@@ -148,6 +148,7 @@ int p80211wext_event_associated(struct wlandevice *wlandev, int assoc);
 #define MAX_KEYLEN 32
 
 #define HOSTWEP_DEFAULTKEY_MASK (BIT(1)|BIT(0))
+#define HOSTWEP_SHAREDKEY BIT(3)
 #define HOSTWEP_DECRYPT  BIT(4)
 #define HOSTWEP_ENCRYPT  BIT(5)
 #define HOSTWEP_PRIVACYINVOKED BIT(6)
@@ -183,9 +184,9 @@ typedef struct wlandevice {
 	int (*close) (struct wlandevice *wlandev);
 	void (*reset) (struct wlandevice *wlandev);
 	int (*txframe) (struct wlandevice *wlandev, struct sk_buff *skb,
-			p80211_hdr_t *p80211_hdr,
-			p80211_metawep_t *p80211_wep);
-	int (*mlmerequest) (struct wlandevice *wlandev, p80211msg_t *msg);
+			union p80211_hdr *p80211_hdr,
+			struct p80211_metawep *p80211_wep);
+	int (*mlmerequest) (struct wlandevice *wlandev, struct p80211msg *msg);
 	int (*set_multicast_list) (struct wlandevice *wlandev,
 				   netdevice_t *dev);
 	void (*tx_timeout) (struct wlandevice *wlandev);
@@ -233,7 +234,7 @@ int wep_decrypt(wlandevice_t *wlandev, u8 *buf, u32 len, int key_override,
 int wep_encrypt(wlandevice_t *wlandev, u8 *buf, u8 *dst, u32 len, int keynum,
 		u8 *iv, u8 *icv);
 
-int wlan_setup(wlandevice_t *wlandev);
+int wlan_setup(wlandevice_t *wlandev, struct device *physdev);
 int wlan_unsetup(wlandevice_t *wlandev);
 int register_wlandev(wlandevice_t *wlandev);
 int unregister_wlandev(wlandevice_t *wlandev);
diff --git a/drivers/staging/wlan-ng/p80211req.c b/drivers/staging/wlan-ng/p80211req.c
index 207f080cfc9..179194e7d2a 100644
--- a/drivers/staging/wlan-ng/p80211req.c
+++ b/drivers/staging/wlan-ng/p80211req.c
@@ -72,9 +72,9 @@
 #include "p80211metastruct.h"
 #include "p80211req.h"
 
-static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg);
+static void p80211req_handlemsg(wlandevice_t *wlandev, struct p80211msg *msg);
 static int p80211req_mibset_mibget(wlandevice_t *wlandev,
-				   p80211msg_dot11req_mibget_t *mib_msg,
+				   struct p80211msg_dot11req_mibget *mib_msg,
 				   int isget);
 
 /*----------------------------------------------------------------
@@ -96,7 +96,7 @@ static int p80211req_mibset_mibget(wlandevice_t *wlandev,
 int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf)
 {
 	int result = 0;
-	p80211msg_t *msg = (p80211msg_t *) msgbuf;
+	struct p80211msg *msg = (struct p80211msg *) msgbuf;
 
 	/* Check to make sure the MSD is running */
 	if (!((wlandev->msdstate == WLAN_MSD_HWPRESENT &&
@@ -150,13 +150,13 @@ int p80211req_dorequest(wlandevice_t *wlandev, u8 *msgbuf)
 * Call context:
 *	Process thread
 ----------------------------------------------------------------*/
-static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg)
+static void p80211req_handlemsg(wlandevice_t *wlandev, struct p80211msg *msg)
 {
 	switch (msg->msgcode) {
 
 	case DIDmsg_lnxreq_hostwep:{
-			p80211msg_lnxreq_hostwep_t *req =
-			    (p80211msg_lnxreq_hostwep_t *) msg;
+			struct p80211msg_lnxreq_hostwep *req =
+			    (struct p80211msg_lnxreq_hostwep *) msg;
 			wlandev->hostwep &=
 			    ~(HOSTWEP_DECRYPT | HOSTWEP_ENCRYPT);
 			if (req->decrypt.data == P80211ENUM_truth_true)
@@ -169,8 +169,8 @@ static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg)
 	case DIDmsg_dot11req_mibget:
 	case DIDmsg_dot11req_mibset:{
 			int isget = (msg->msgcode == DIDmsg_dot11req_mibget);
-			p80211msg_dot11req_mibget_t *mib_msg =
-			    (p80211msg_dot11req_mibget_t *) msg;
+			struct p80211msg_dot11req_mibget *mib_msg =
+			    (struct p80211msg_dot11req_mibget *) msg;
 			p80211req_mibset_mibget(wlandev, mib_msg, isget);
 		}
 	default:
@@ -181,7 +181,7 @@ static void p80211req_handlemsg(wlandevice_t *wlandev, p80211msg_t *msg)
 }
 
 static int p80211req_mibset_mibget(wlandevice_t *wlandev,
-				   p80211msg_dot11req_mibget_t *mib_msg,
+				   struct p80211msg_dot11req_mibget *mib_msg,
 				   int isget)
 {
 	p80211itemd_t *mibitem = (p80211itemd_t *) mib_msg->mibattribute.data;
diff --git a/drivers/staging/wlan-ng/p80211wext.c b/drivers/staging/wlan-ng/p80211wext.c
deleted file mode 100644
index 387194d4a6e..00000000000
--- a/drivers/staging/wlan-ng/p80211wext.c
+++ /dev/null
@@ -1,1690 +0,0 @@
-/* src/p80211/p80211wext.c
-*
-* Glue code to make linux-wlan-ng a happy wireless extension camper.
-*
-* original author:  Reyk Floeter <reyk@synack.de>
-* Completely re-written by Solomon Peachy <solomon@linux-wlan.com>
-*
-* Copyright (C) 2002 AbsoluteValue Systems, Inc.  All Rights Reserved.
-* --------------------------------------------------------------------
-*
-* linux-wlan
-*
-*   The contents of this file are subject to the Mozilla Public
-*   License Version 1.1 (the "License"); you may not use this file
-*   except in compliance with the License. You may obtain a copy of
-*   the License at http://www.mozilla.org/MPL/
-*
-*   Software distributed under the License is distributed on an "AS
-*   IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-*   implied. See the License for the specific language governing
-*   rights and limitations under the License.
-*
-*   Alternatively, the contents of this file may be used under the
-*   terms of the GNU Public License version 2 (the "GPL"), in which
-*   case the provisions of the GPL are applicable instead of the
-*   above.  If you wish to allow the use of your version of this file
-*   only under the terms of the GPL and not to allow others to use
-*   your version of this file under the MPL, indicate your decision
-*   by deleting the provisions above and replace them with the notice
-*   and other provisions required by the GPL.  If you do not delete
-*   the provisions above, a recipient may use your version of this
-*   file under either the MPL or the GPL.
-*
-* --------------------------------------------------------------------
-*/
-
-/*================================================================*/
-/* System Includes */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <linux/if_arp.h>
-#include <linux/bitops.h>
-#include <linux/uaccess.h>
-#include <asm/byteorder.h>
-#include <linux/if_ether.h>
-
-#include "p80211types.h"
-#include "p80211hdr.h"
-#include "p80211conv.h"
-#include "p80211mgmt.h"
-#include "p80211msg.h"
-#include "p80211metastruct.h"
-#include "p80211metadef.h"
-#include "p80211netdev.h"
-#include "p80211ioctl.h"
-#include "p80211req.h"
-
-static int p80211wext_giwrate(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_param *rrq, char *extra);
-static int p80211wext_giwessid(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_point *data, char *essid);
-
-static u8 p80211_mhz_to_channel(u16 mhz)
-{
-	if (mhz >= 5000)
-		return (mhz - 5000) / 5;
-
-	if (mhz == 2484)
-		return 14;
-
-	if (mhz >= 2407)
-		return (mhz - 2407) / 5;
-
-	return 0;
-}
-
-static u16 p80211_channel_to_mhz(u8 ch, int dot11a)
-{
-
-	if (ch == 0)
-		return 0;
-	if (ch > 200)
-		return 0;
-
-	/* 5G */
-	if (dot11a)
-		return 5000 + (5 * ch);
-
-	/* 2.4G */
-	if (ch == 14)
-		return 2484;
-
-	if ((ch < 14) && (ch > 0))
-		return 2407 + (5 * ch);
-
-	return 0;
-}
-
-/* taken from orinoco.c ;-) */
-static const long p80211wext_channel_freq[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-
-#define NUM_CHANNELS ARRAY_SIZE(p80211wext_channel_freq)
-
-/* steal a spare bit to store the shared/opensystems state.
-   should default to open if not set */
-#define HOSTWEP_SHAREDKEY BIT(3)
-
-static int qual_as_percent(int snr)
-{
-	if (snr <= 0)
-		return 0;
-	if (snr <= 40)
-		return snr * 5 / 2;
-	return 100;
-}
-
-static int p80211wext_setmib(wlandevice_t *wlandev, u32 did, u32 data)
-{
-	p80211msg_dot11req_mibset_t msg;
-	p80211item_uint32_t *mibitem =
-		(p80211item_uint32_t *)&msg.mibattribute.data;
-	int result;
-
-	msg.msgcode = DIDmsg_dot11req_mibset;
-	memset(mibitem, 0, sizeof(*mibitem));
-	mibitem->did = did;
-	mibitem->data = data;
-	result = p80211req_dorequest(wlandev, (u8 *) &msg);
-
-	return result;
-}
-
-/*
- * get a 32 bit mib value
- */
-static int p80211wext_getmib(wlandevice_t *wlandev, u32 did, u32 *data)
-{
-	p80211msg_dot11req_mibset_t msg;
-	p80211item_uint32_t *mibitem =
-		(p80211item_uint32_t *)&msg.mibattribute.data;
-	int result;
-
-	msg.msgcode = DIDmsg_dot11req_mibget;
-	memset(mibitem, 0, sizeof(*mibitem));
-	mibitem->did = did;
-	result = p80211req_dorequest(wlandev, (u8 *) &msg);
-	if (!result)
-		*data = mibitem->data;
-
-	return result;
-}
-
-static int p80211wext_autojoin(wlandevice_t *wlandev)
-{
-	p80211msg_lnxreq_autojoin_t msg;
-	struct iw_point data;
-	char ssid[IW_ESSID_MAX_SIZE];
-
-	int result;
-	int err = 0;
-
-	/* Get ESSID */
-	result = p80211wext_giwessid(wlandev->netdev, NULL, &data, ssid);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	if (wlandev->hostwep & HOSTWEP_SHAREDKEY)
-		msg.authtype.data = P80211ENUM_authalg_sharedkey;
-	else
-		msg.authtype.data = P80211ENUM_authalg_opensystem;
-
-	msg.msgcode = DIDmsg_lnxreq_autojoin;
-
-	/* Trim the last '\0' to fit the SSID format */
-
-	if (data.length && ssid[data.length - 1] == '\0')
-		data.length = data.length - 1;
-
-	memcpy(msg.ssid.data.data, ssid, data.length);
-	msg.ssid.data.len = data.length;
-
-	result = p80211req_dorequest(wlandev, (u8 *) &msg);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-
-	return err;
-
-}
-
-/* called by /proc/net/wireless */
-struct iw_statistics *p80211wext_get_wireless_stats(netdevice_t *dev)
-{
-	p80211msg_lnxreq_commsquality_t quality;
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct iw_statistics *wstats = &wlandev->wstats;
-	int retval;
-
-	/* Check */
-	if ((wlandev == NULL) || (wlandev->msdstate != WLAN_MSD_RUNNING))
-		return NULL;
-
-	/* XXX Only valid in station mode */
-	wstats->status = 0;
-
-	/* build request message */
-	quality.msgcode = DIDmsg_lnxreq_commsquality;
-	quality.dbm.data = P80211ENUM_truth_true;
-	quality.dbm.status = P80211ENUM_msgitem_status_data_ok;
-
-	/* send message to nsd */
-	if (wlandev->mlmerequest == NULL)
-		return NULL;
-
-	retval = wlandev->mlmerequest(wlandev, (p80211msg_t *) &quality);
-
-	wstats->qual.qual = qual_as_percent(quality.link.data);	/* overall link quality */
-	wstats->qual.level = quality.level.data;	/* instant signal level */
-	wstats->qual.noise = quality.noise.data;	/* instant noise level */
-
-	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-	wstats->discard.code = wlandev->rx.decrypt_err;
-	wstats->discard.nwid = 0;
-	wstats->discard.misc = 0;
-
-	wstats->discard.fragment = 0;	/* incomplete fragments */
-	wstats->discard.retries = 0;	/* tx retries. */
-	wstats->miss.beacon = 0;
-
-	return wstats;
-}
-
-static int p80211wext_giwname(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      char *name, char *extra)
-{
-	struct iw_param rate;
-	int result;
-	int err = 0;
-
-	result = p80211wext_giwrate(dev, NULL, &rate, NULL);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	switch (rate.value) {
-	case 1000000:
-	case 2000000:
-		strcpy(name, "IEEE 802.11-DS");
-		break;
-	case 5500000:
-	case 11000000:
-		strcpy(name, "IEEE 802.11-b");
-		break;
-	}
-exit:
-	return err;
-}
-
-static int p80211wext_giwfreq(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_freq *freq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	if (value > NUM_CHANNELS) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	/* convert into frequency instead of a channel */
-	freq->e = 1;
-	freq->m = p80211_channel_to_mhz(value, 0) * 100000;
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwfreq(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_freq *freq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	if (!wlan_wext_write) {
-		err = -EOPNOTSUPP;
-		goto exit;
-	}
-
-	if ((freq->e == 0) && (freq->m <= 1000))
-		value = freq->m;
-	else
-		value = p80211_mhz_to_channel(freq->m);
-
-	result = p80211wext_setmib(wlandev,
-			     DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel,
-			     value);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-	return err;
-}
-
-static int p80211wext_giwmode(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      __u32 *mode, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-
-	switch (wlandev->macmode) {
-	case WLAN_MACMODE_IBSS_STA:
-		*mode = IW_MODE_ADHOC;
-		break;
-	case WLAN_MACMODE_ESS_STA:
-		*mode = IW_MODE_INFRA;
-		break;
-	case WLAN_MACMODE_ESS_AP:
-		*mode = IW_MODE_MASTER;
-		break;
-	default:
-		/* Not set yet. */
-		*mode = IW_MODE_AUTO;
-	}
-
-	return 0;
-}
-
-static int p80211wext_siwmode(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      __u32 *mode, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-
-	if (!wlan_wext_write) {
-		err = -EOPNOTSUPP;
-		goto exit;
-	}
-
-	if (*mode != IW_MODE_ADHOC && *mode != IW_MODE_INFRA &&
-	    *mode != IW_MODE_MASTER) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	/* Operation mode is the same with current mode */
-	if (*mode == wlandev->macmode)
-		goto exit;
-
-	switch (*mode) {
-	case IW_MODE_ADHOC:
-		wlandev->macmode = WLAN_MACMODE_IBSS_STA;
-		break;
-	case IW_MODE_INFRA:
-		wlandev->macmode = WLAN_MACMODE_ESS_STA;
-		break;
-	case IW_MODE_MASTER:
-		wlandev->macmode = WLAN_MACMODE_ESS_AP;
-		break;
-	default:
-		/* Not set yet. */
-		printk(KERN_INFO "Operation mode: %d not support\n", *mode);
-		return -EOPNOTSUPP;
-	}
-
-	/* Set Operation mode to the PORT TYPE RID */
-	result = p80211wext_setmib(wlandev,
-				DIDmib_p2_p2Static_p2CnfPortType,
-				(*mode == IW_MODE_ADHOC) ? 0 : 1);
-	if (result)
-		err = -EFAULT;
-exit:
-	return err;
-}
-
-static int p80211wext_giwrange(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_point *data, char *extra)
-{
-	struct iw_range *range = (struct iw_range *)extra;
-	int i, val;
-
-	/* for backward compatability set size and zero everything we don't understand */
-	data->length = sizeof(*range);
-	memset(range, 0, sizeof(*range));
-
-	range->txpower_capa = IW_TXPOW_DBM;
-	/* XXX what about min/max_pmp, min/max_pmt, etc. */
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 13;
-
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->min_retry = 0;
-	range->max_retry = 255;
-
-	range->event_capa[0] = (IW_EVENT_CAPA_K_0 |	/* mode/freq/ssid */
-				IW_EVENT_CAPA_MASK(SIOCGIWAP) |
-				IW_EVENT_CAPA_MASK(SIOCGIWSCAN));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;	/* encode */
-	range->event_capa[4] = (IW_EVENT_CAPA_MASK(IWEVQUAL) |
-				IW_EVENT_CAPA_MASK(IWEVCUSTOM));
-
-	range->num_channels = NUM_CHANNELS;
-
-	/* XXX need to filter against the regulatory domain &| active set */
-	val = 0;
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		range->freq[val].i = i + 1;
-		range->freq[val].m = p80211wext_channel_freq[i] * 100000;
-		range->freq[val].e = 1;
-		val++;
-	}
-
-	range->num_frequency = val;
-
-	/* Max of /proc/net/wireless */
-	range->max_qual.qual = 100;
-	range->max_qual.level = 0;
-	range->max_qual.noise = 0;
-	range->sensitivity = 3;
-	/* XXX these need to be nsd-specific! */
-
-	range->min_rts = 0;
-	range->max_rts = 2347;
-	range->min_frag = 256;
-	range->max_frag = 2346;
-
-	range->max_encoding_tokens = NUM_WEPKEYS;
-	range->num_encoding_sizes = 2;
-	range->encoding_size[0] = 5;
-	range->encoding_size[1] = 13;
-
-	/* XXX what about num_bitrates/throughput? */
-	range->num_bitrates = 0;
-
-	/* estimated max throughput */
-	/* XXX need to cap it if we're running at ~2Mbps.. */
-	range->throughput = 5500000;
-
-	return 0;
-}
-
-static int p80211wext_giwap(netdevice_t *dev,
-			    struct iw_request_info *info,
-			    struct sockaddr *ap_addr, char *extra)
-{
-
-	wlandevice_t *wlandev = dev->ml_priv;
-
-	memcpy(ap_addr->sa_data, wlandev->bssid, WLAN_BSSID_LEN);
-	ap_addr->sa_family = ARPHRD_ETHER;
-
-	return 0;
-}
-
-static int p80211wext_giwencode(netdevice_t *dev,
-				struct iw_request_info *info,
-				struct iw_point *erq, char *key)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int err = 0;
-	int i;
-
-	i = (erq->flags & IW_ENCODE_INDEX) - 1;
-	erq->flags = 0;
-
-	if (wlandev->hostwep & HOSTWEP_PRIVACYINVOKED)
-		erq->flags |= IW_ENCODE_ENABLED;
-	else
-		erq->flags |= IW_ENCODE_DISABLED;
-
-	if (wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED)
-		erq->flags |= IW_ENCODE_RESTRICTED;
-	else
-		erq->flags |= IW_ENCODE_OPEN;
-
-	i = (erq->flags & IW_ENCODE_INDEX) - 1;
-
-	if (i == -1)
-		i = wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK;
-
-	if ((i < 0) || (i >= NUM_WEPKEYS)) {
-		err = -EINVAL;
-		goto exit;
-	}
-
-	erq->flags |= i + 1;
-
-	/* copy the key from the driver cache as the keys are read-only MIBs */
-	erq->length = wlandev->wep_keylens[i];
-	memcpy(key, wlandev->wep_keys[i], erq->length);
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwencode(netdevice_t *dev,
-				struct iw_request_info *info,
-				struct iw_point *erq, char *key)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211msg_dot11req_mibset_t msg;
-	p80211item_pstr32_t pstr;
-
-	int err = 0;
-	int result = 0;
-	int i;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	/* Check the Key index first. */
-	i = (erq->flags & IW_ENCODE_INDEX);
-	if (i) {
-		if ((i < 1) || (i > NUM_WEPKEYS)) {
-			err = -EINVAL;
-			goto exit;
-		} else {
-			i--;
-		}
-		/* Set current key number only if no keys are given */
-		if (erq->flags & IW_ENCODE_NOKEY) {
-			result =
-				p80211wext_setmib(wlandev,
-						  DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
-						  i);
-
-			if (result) {
-				err = -EFAULT;
-				goto exit;
-			}
-		}
-
-	} else {
-		/* Use defaultkey if no Key Index */
-		i = wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK;
-	}
-
-	/* Check if there is no key information in the iwconfig request */
-	if ((erq->flags & IW_ENCODE_NOKEY) == 0) {
-
-		/*------------------------------------------------------------
-		 * If there is WEP Key for setting, check the Key Information
-		 * and then set it to the firmware.
-		 -------------------------------------------------------------*/
-
-		if (erq->length > 0) {
-			/* copy the key from the driver cache as the keys are read-only MIBs */
-			wlandev->wep_keylens[i] = erq->length;
-			memcpy(wlandev->wep_keys[i], key, erq->length);
-
-			/* Prepare data struture for p80211req_dorequest. */
-			memcpy(pstr.data.data, key, erq->length);
-			pstr.data.len = erq->length;
-
-			switch (i) {
-			case 0:
-				pstr.did =
-				    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
-				break;
-
-			case 1:
-				pstr.did =
-				    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
-				break;
-
-			case 2:
-				pstr.did =
-				    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
-				break;
-
-			case 3:
-				pstr.did =
-				    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
-				break;
-
-			default:
-				err = -EINVAL;
-				goto exit;
-			}
-
-			msg.msgcode = DIDmsg_dot11req_mibset;
-			memcpy(&msg.mibattribute.data, &pstr, sizeof(pstr));
-			result = p80211req_dorequest(wlandev, (u8 *) &msg);
-
-			if (result) {
-				err = -EFAULT;
-				goto exit;
-			}
-		}
-
-	}
-
-	/* Check the PrivacyInvoked flag */
-	if (erq->flags & IW_ENCODE_DISABLED) {
-		result =
-		    p80211wext_setmib(wlandev,
-					 DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
-					 P80211ENUM_truth_false);
-	} else {
-		result =
-		    p80211wext_setmib(wlandev,
-					 DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
-					 P80211ENUM_truth_true);
-	}
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	/*  The  security  mode  may  be open or restricted, and its meaning
-	   depends on the card used. With  most  cards,  in  open  mode  no
-	   authentication  is  used  and  the  card  may  also  accept non-
-	   encrypted sessions, whereas in restricted  mode  only  encrypted
-	   sessions  are  accepted  and the card will use authentication if
-	   available.
-	 */
-	if (erq->flags & IW_ENCODE_RESTRICTED) {
-		result =
-		    p80211wext_setmib(wlandev,
-					 DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
-					 P80211ENUM_truth_true);
-	} else if (erq->flags & IW_ENCODE_OPEN) {
-		result =
-		    p80211wext_setmib(wlandev,
-					 DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
-					 P80211ENUM_truth_false);
-	}
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-
-	return err;
-}
-
-static int p80211wext_giwessid(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_point *data, char *essid)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-
-	if (wlandev->ssid.len) {
-		data->length = wlandev->ssid.len;
-		data->flags = 1;
-		memcpy(essid, wlandev->ssid.data, data->length);
-		essid[data->length] = 0;
-	} else {
-		memset(essid, 0, sizeof(wlandev->ssid.data));
-		data->length = 0;
-		data->flags = 0;
-	}
-
-	return 0;
-}
-
-static int p80211wext_siwessid(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_point *data, char *essid)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211msg_lnxreq_autojoin_t msg;
-
-	int result;
-	int err = 0;
-	int length = data->length;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	if (wlandev->hostwep & HOSTWEP_SHAREDKEY)
-		msg.authtype.data = P80211ENUM_authalg_sharedkey;
-	else
-		msg.authtype.data = P80211ENUM_authalg_opensystem;
-
-	msg.msgcode = DIDmsg_lnxreq_autojoin;
-
-	/* Trim the last '\0' to fit the SSID format */
-	if (length && essid[length - 1] == '\0')
-		length--;
-
-	memcpy(msg.ssid.data.data, essid, length);
-	msg.ssid.data.len = length;
-
-	pr_debug("autojoin_ssid for %s \n", essid);
-	result = p80211req_dorequest(wlandev, (u8 *) &msg);
-	pr_debug("autojoin_ssid %d\n", result);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwcommit(netdevice_t *dev,
-				struct iw_request_info *info,
-				struct iw_point *data, char *essid)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int err = 0;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	/* Auto Join */
-	err = p80211wext_autojoin(wlandev);
-
-exit:
-	return err;
-}
-
-static int p80211wext_giwrate(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_param *rrq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev, DIDmib_p2_p2MAC_p2CurrentTxRate, &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	rrq->fixed = 0;		/* can it change? */
-	rrq->disabled = 0;
-	rrq->value = 0;
-
-#define		HFA384x_RATEBIT_1			((u16)1)
-#define		HFA384x_RATEBIT_2			((u16)2)
-#define		HFA384x_RATEBIT_5dot5			((u16)4)
-#define		HFA384x_RATEBIT_11			((u16)8)
-
-	switch (value) {
-	case HFA384x_RATEBIT_1:
-		rrq->value = 1000000;
-		break;
-	case HFA384x_RATEBIT_2:
-		rrq->value = 2000000;
-		break;
-	case HFA384x_RATEBIT_5dot5:
-		rrq->value = 5500000;
-		break;
-	case HFA384x_RATEBIT_11:
-		rrq->value = 11000000;
-		break;
-	default:
-		err = -EINVAL;
-	}
-exit:
-	return err;
-}
-
-static int p80211wext_giwrts(netdevice_t *dev,
-			     struct iw_request_info *info,
-			     struct iw_param *rts, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	rts->value = value;
-	rts->disabled = (rts->value == 2347);
-	rts->fixed = 1;
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwrts(netdevice_t *dev,
-			     struct iw_request_info *info,
-			     struct iw_param *rts, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	if (!wlan_wext_write) {
-		err = -EOPNOTSUPP;
-		goto exit;
-	}
-
-	if (rts->disabled)
-		value = 2347;
-	else
-		value = rts->value;
-
-	result = p80211wext_setmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold,
-				   value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-	return err;
-}
-
-static int p80211wext_giwfrag(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_param *frag, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	frag->value = value;
-	frag->disabled = (frag->value == 2346);
-	frag->fixed = 1;
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwfrag(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_param *frag, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	int value;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	if (frag->disabled)
-		value = 2346;
-	else
-		value = frag->value;
-
-	result = p80211wext_setmib(wlandev,
-		   DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold,
-				      value);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-	return err;
-}
-
-#ifndef IW_RETRY_LONG
-#define IW_RETRY_LONG IW_RETRY_MAX
-#endif
-
-#ifndef IW_RETRY_SHORT
-#define IW_RETRY_SHORT IW_RETRY_MIN
-#endif
-
-static int p80211wext_giwretry(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_param *rrq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	u16 shortretry, longretry, lifetime;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	shortretry = value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	longretry = value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime,
-				   &value);
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	lifetime = value;
-
-	rrq->disabled = 0;
-
-	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
-		rrq->flags = IW_RETRY_LIFETIME;
-		rrq->value = lifetime * 1024;
-	} else {
-		if (rrq->flags & IW_RETRY_LONG) {
-			rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
-			rrq->value = longretry;
-		} else {
-			rrq->flags = IW_RETRY_LIMIT;
-			rrq->value = shortretry;
-			if (shortretry != longretry)
-				rrq->flags |= IW_RETRY_SHORT;
-		}
-	}
-
-exit:
-	return err;
-
-}
-
-static int p80211wext_siwretry(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_param *rrq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211item_uint32_t mibitem;
-	p80211msg_dot11req_mibset_t msg;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	if (rrq->disabled) {
-		err = -EINVAL;
-		goto exit;
-	}
-
-	msg.msgcode = DIDmsg_dot11req_mibset;
-
-	if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
-
-		value = rrq->value /= 1024;
-		result = p80211wext_setmib(wlandev,
-					   DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime,
-					   value);
-		if (result) {
-			err = -EFAULT;
-			goto exit;
-		}
-	} else {
-		if (rrq->flags & IW_RETRY_LONG) {
-			result = p80211wext_setmib(wlandev,
-						   DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit,
-						   rrq->value);
-
-			if (result) {
-				err = -EFAULT;
-				goto exit;
-			}
-		}
-
-		if (rrq->flags & IW_RETRY_SHORT) {
-			result = p80211wext_setmib(wlandev,
-						   DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit,
-						   rrq->value);
-
-			if (result) {
-				err = -EFAULT;
-				goto exit;
-			}
-		}
-	}
-
-exit:
-	return err;
-
-}
-
-static int p80211wext_siwtxpow(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_param *rrq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211item_uint32_t mibitem;
-	p80211msg_dot11req_mibset_t msg;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	if (!wlan_wext_write) {
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	if (rrq->fixed == 0)
-		value = 30;
-	else
-		value = rrq->value;
-	result = p80211wext_setmib(wlandev,
-				   DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel,
-				   value);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-exit:
-	return err;
-}
-
-static int p80211wext_giwtxpow(netdevice_t *dev,
-			       struct iw_request_info *info,
-			       struct iw_param *rrq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	int result;
-	int err = 0;
-	unsigned int value;
-
-	result = p80211wext_getmib(wlandev,
-				   DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel,
-				   &value);
-
-	if (result) {
-		err = -EFAULT;
-		goto exit;
-	}
-
-	/* XXX handle OFF by setting disabled = 1; */
-
-	rrq->flags = 0;		/* IW_TXPOW_DBM; */
-	rrq->disabled = 0;
-	rrq->fixed = 0;
-	rrq->value = value;
-
-exit:
-	return err;
-}
-
-static int p80211wext_siwspy(netdevice_t *dev,
-			     struct iw_request_info *info,
-			     struct iw_point *srq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct sockaddr address[IW_MAX_SPY];
-	int number = srq->length;
-	int i;
-
-	/* Copy the data from the input buffer */
-	memcpy(address, extra, sizeof(struct sockaddr) * number);
-
-	wlandev->spy_number = 0;
-
-	if (number > 0) {
-
-		/* extract the addresses */
-		for (i = 0; i < number; i++) {
-
-			memcpy(wlandev->spy_address[i], address[i].sa_data,
-			       ETH_ALEN);
-		}
-
-		/* reset stats */
-		memset(wlandev->spy_stat, 0,
-		       sizeof(struct iw_quality) * IW_MAX_SPY);
-
-		/* set number of addresses */
-		wlandev->spy_number = number;
-	}
-
-	return 0;
-}
-
-/* jkriegl: from orinoco, modified */
-static int p80211wext_giwspy(netdevice_t *dev,
-			     struct iw_request_info *info,
-			     struct iw_point *srq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-
-	struct sockaddr address[IW_MAX_SPY];
-	struct iw_quality spy_stat[IW_MAX_SPY];
-	int number;
-	int i;
-
-	number = wlandev->spy_number;
-
-	if (number > 0) {
-
-		/* populate address and spy struct's */
-		for (i = 0; i < number; i++) {
-			memcpy(address[i].sa_data, wlandev->spy_address[i],
-			       ETH_ALEN);
-			address[i].sa_family = AF_UNIX;
-			memcpy(&spy_stat[i], &wlandev->spy_stat[i],
-			       sizeof(struct iw_quality));
-		}
-
-		/* reset update flag */
-		for (i = 0; i < number; i++)
-			wlandev->spy_stat[i].updated = 0;
-	}
-
-	/* push stuff to user space */
-	srq->length = number;
-	memcpy(extra, address, sizeof(struct sockaddr) * number);
-	memcpy(extra + sizeof(struct sockaddr) * number, spy_stat,
-	       sizeof(struct iw_quality) * number);
-
-	return 0;
-}
-
-static int prism2_result2err(int prism2_result)
-{
-	int err = 0;
-
-	switch (prism2_result) {
-	case P80211ENUM_resultcode_invalid_parameters:
-		err = -EINVAL;
-		break;
-	case P80211ENUM_resultcode_implementation_failure:
-		err = -EIO;
-		break;
-	case P80211ENUM_resultcode_not_supported:
-		err = -EOPNOTSUPP;
-		break;
-	default:
-		err = 0;
-		break;
-	}
-
-	return err;
-}
-
-static int p80211wext_siwscan(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_point *srq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211msg_dot11req_scan_t msg;
-	int result;
-	int err = 0;
-	int i = 0;
-
-	if (wlandev->macmode == WLAN_MACMODE_ESS_AP) {
-		printk(KERN_ERR "Can't scan in AP mode\n");
-		err = (-EOPNOTSUPP);
-		goto exit;
-	}
-
-	memset(&msg, 0x00, sizeof(p80211msg_dot11req_scan_t));
-	msg.msgcode = DIDmsg_dot11req_scan;
-	msg.bsstype.data = P80211ENUM_bsstype_any;
-
-	memset(&(msg.bssid.data), 0xFF, sizeof(p80211item_pstr6_t));
-	msg.bssid.data.len = 6;
-
-	msg.scantype.data = P80211ENUM_scantype_active;
-	msg.probedelay.data = 0;
-
-	for (i = 1; i <= 14; i++)
-		msg.channellist.data.data[i - 1] = i;
-	msg.channellist.data.len = 14;
-
-	msg.maxchanneltime.data = 250;
-	msg.minchanneltime.data = 200;
-
-	result = p80211req_dorequest(wlandev, (u8 *) &msg);
-	if (result)
-		err = prism2_result2err(msg.resultcode.data);
-
-exit:
-	return err;
-}
-
-/* Helper to translate scan into Wireless Extensions scan results.
- * Inspired by the prism54 code, which was in turn inspired by the
- * airo driver code.
- */
-static char *wext_translate_bss(struct iw_request_info *info, char *current_ev,
-				char *end_buf,
-				p80211msg_dot11req_scan_results_t *bss)
-{
-	struct iw_event iwe;	/* Temporary buffer */
-
-	/* The first entry must be the MAC address */
-	memcpy(iwe.u.ap_addr.sa_data, bss->bssid.data.data, WLAN_BSSID_LEN);
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	iwe.cmd = SIOCGIWAP;
-	current_ev =
-	    iwe_stream_add_event(info, current_ev, end_buf, &iwe,
-				 IW_EV_ADDR_LEN);
-
-	/* The following entries will be displayed in the same order we give them */
-
-	/* The ESSID. */
-	if (bss->ssid.data.len > 0) {
-		char essid[IW_ESSID_MAX_SIZE + 1];
-		int size;
-
-		size =
-		    min_t(unsigned short, IW_ESSID_MAX_SIZE,
-			  bss->ssid.data.len);
-		memset(&essid, 0, sizeof(essid));
-		memcpy(&essid, bss->ssid.data.data, size);
-		pr_debug(" essid size = %d\n", size);
-		iwe.u.data.length = size;
-		iwe.u.data.flags = 1;
-		iwe.cmd = SIOCGIWESSID;
-		current_ev =
-		    iwe_stream_add_point(info, current_ev, end_buf, &iwe,
-					 &essid[0]);
-		pr_debug(" essid size OK.\n");
-	}
-
-	switch (bss->bsstype.data) {
-	case P80211ENUM_bsstype_infrastructure:
-		iwe.u.mode = IW_MODE_MASTER;
-		break;
-
-	case P80211ENUM_bsstype_independent:
-		iwe.u.mode = IW_MODE_ADHOC;
-		break;
-
-	default:
-		iwe.u.mode = 0;
-		break;
-	}
-	iwe.cmd = SIOCGIWMODE;
-	if (iwe.u.mode)
-		current_ev =
-		    iwe_stream_add_event(info, current_ev, end_buf, &iwe,
-					 IW_EV_UINT_LEN);
-
-	/* Encryption capability */
-	if (bss->privacy.data == P80211ENUM_truth_true)
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-	else
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	iwe.u.data.length = 0;
-	iwe.cmd = SIOCGIWENCODE;
-	current_ev =
-	    iwe_stream_add_point(info, current_ev, end_buf, &iwe, NULL);
-
-	/* Add frequency. (short) bss->channel is the frequency in MHz */
-	iwe.u.freq.m = bss->dschannel.data;
-	iwe.u.freq.e = 0;
-	iwe.cmd = SIOCGIWFREQ;
-	current_ev =
-	    iwe_stream_add_event(info, current_ev, end_buf, &iwe,
-				 IW_EV_FREQ_LEN);
-
-	/* Add quality statistics */
-	iwe.u.qual.level = bss->signal.data;
-	iwe.u.qual.noise = bss->noise.data;
-	/* do a simple SNR for quality */
-	iwe.u.qual.qual = qual_as_percent(bss->signal.data - bss->noise.data);
-	iwe.cmd = IWEVQUAL;
-	current_ev =
-	    iwe_stream_add_event(info, current_ev, end_buf, &iwe,
-				 IW_EV_QUAL_LEN);
-
-	return current_ev;
-}
-
-static int p80211wext_giwscan(netdevice_t *dev,
-			      struct iw_request_info *info,
-			      struct iw_point *srq, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	p80211msg_dot11req_scan_results_t msg;
-	int result = 0;
-	int err = 0;
-	int i = 0;
-	int scan_good = 0;
-	char *current_ev = extra;
-
-	/* Since wireless tools doesn't really have a way of passing how
-	 * many scan results results there were back here, keep grabbing them
-	 * until we fail.
-	 */
-	do {
-		memset(&msg, 0, sizeof(msg));
-		msg.msgcode = DIDmsg_dot11req_scan_results;
-		msg.bssindex.data = i;
-
-		result = p80211req_dorequest(wlandev, (u8 *) &msg);
-		if ((result != 0) ||
-		    (msg.resultcode.data != P80211ENUM_resultcode_success)) {
-			break;
-		}
-
-		current_ev =
-		    wext_translate_bss(info, current_ev,
-				       extra + IW_SCAN_MAX_DATA, &msg);
-		scan_good = 1;
-		i++;
-	} while (i < IW_MAX_AP);
-
-	srq->length = (current_ev - extra);
-	srq->flags = 0;		/* todo */
-
-	if (result && !scan_good)
-		err = prism2_result2err(msg.resultcode.data);
-
-	return err;
-}
-
-/* extra wireless extensions stuff to support NetworkManager (I hope) */
-
-/* SIOCSIWENCODEEXT */
-static int p80211wext_set_encodeext(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	p80211msg_dot11req_mibset_t msg;
-	p80211item_pstr32_t *pstr;
-
-	int result = 0;
-	struct iw_point *encoding = &wrqu->encoding;
-	int idx = encoding->flags & IW_ENCODE_INDEX;
-
-	pr_debug("set_encode_ext flags[%d] alg[%d] keylen[%d]\n",
-		 ext->ext_flags, (int)ext->alg, (int)ext->key_len);
-
-	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
-		/* set default key ? I'm not sure if this the the correct thing to do here */
-
-		if (idx) {
-			if (idx < 1 || idx > NUM_WEPKEYS)
-				return -EINVAL;
-			else
-				idx--;
-		}
-		pr_debug("setting default key (%d)\n", idx);
-		result =
-		    p80211wext_setmib(wlandev,
-					 DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID,
-					 idx);
-		if (result)
-			return -EFAULT;
-	}
-
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		if (ext->alg != IW_ENCODE_ALG_WEP) {
-			pr_debug("asked to set a non wep key :(\n");
-			return -EINVAL;
-		}
-		if (idx) {
-			if (idx < 1 || idx > NUM_WEPKEYS)
-				return -EINVAL;
-			else
-				idx--;
-		}
-		pr_debug("Set WEP key (%d)\n", idx);
-		wlandev->wep_keylens[idx] = ext->key_len;
-		memcpy(wlandev->wep_keys[idx], ext->key, ext->key_len);
-
-		memset(&msg, 0, sizeof(msg));
-		pstr = (p80211item_pstr32_t *) &msg.mibattribute.data;
-		memcpy(pstr->data.data, ext->key, ext->key_len);
-		pstr->data.len = ext->key_len;
-		switch (idx) {
-		case 0:
-			pstr->did =
-			    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0;
-			break;
-		case 1:
-			pstr->did =
-			    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey1;
-			break;
-		case 2:
-			pstr->did =
-			    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey2;
-			break;
-		case 3:
-			pstr->did =
-			    DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey3;
-			break;
-		default:
-			break;
-		}
-		msg.msgcode = DIDmsg_dot11req_mibset;
-		result = p80211req_dorequest(wlandev, (u8 *) &msg);
-		pr_debug("result (%d)\n", result);
-	}
-	return result;
-}
-
-/* SIOCGIWENCODEEXT */
-static int p80211wext_get_encodeext(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-
-	struct iw_point *encoding = &wrqu->encoding;
-	int result = 0;
-	int max_len;
-	int idx;
-
-	pr_debug("get_encode_ext flags[%d] alg[%d] keylen[%d]\n",
-		 ext->ext_flags, (int)ext->alg, (int)ext->key_len);
-
-	max_len = encoding->length - sizeof(*ext);
-	if (max_len <= 0) {
-		pr_debug("get_encodeext max_len [%d] invalid\n", max_len);
-		result = -EINVAL;
-		goto exit;
-	}
-	idx = encoding->flags & IW_ENCODE_INDEX;
-
-	pr_debug("get_encode_ext index [%d]\n", idx);
-
-	if (idx) {
-		if (idx < 1 || idx > NUM_WEPKEYS) {
-			pr_debug("get_encode_ext invalid key index [%d]\n",
-				 idx);
-			result = -EINVAL;
-			goto exit;
-		}
-		idx--;
-	} else {
-		/* default key ? not sure what to do */
-		/* will just use key[0] for now ! FIX ME */
-	}
-
-	encoding->flags = idx + 1;
-	memset(ext, 0, sizeof(*ext));
-
-	ext->alg = IW_ENCODE_ALG_WEP;
-	ext->key_len = wlandev->wep_keylens[idx];
-	memcpy(ext->key, wlandev->wep_keys[idx], ext->key_len);
-
-	encoding->flags |= IW_ENCODE_ENABLED;
-exit:
-	return result;
-}
-
-/* SIOCSIWAUTH */
-static int p80211_wext_set_iwauth(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-	int result = 0;
-
-	pr_debug("set_iwauth flags[%d]\n", (int)param->flags & IW_AUTH_INDEX);
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-		pr_debug("drop_unencrypted %d\n", param->value);
-		if (param->value)
-			result =
-			    p80211wext_setmib(wlandev,
-						 DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
-						 P80211ENUM_truth_true);
-		else
-			result =
-			    p80211wext_setmib(wlandev,
-						 DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted,
-						 P80211ENUM_truth_false);
-		break;
-
-	case IW_AUTH_PRIVACY_INVOKED:
-		pr_debug("privacy invoked %d\n", param->value);
-		if (param->value)
-			result =
-			    p80211wext_setmib(wlandev,
-						 DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
-						 P80211ENUM_truth_true);
-		else
-			result =
-			    p80211wext_setmib(wlandev,
-						 DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked,
-						 P80211ENUM_truth_false);
-
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
-			pr_debug("set open_system\n");
-			wlandev->hostwep &= ~HOSTWEP_SHAREDKEY;
-		} else if (param->value & IW_AUTH_ALG_SHARED_KEY) {
-			pr_debug("set shared key\n");
-			wlandev->hostwep |= HOSTWEP_SHAREDKEY;
-		} else {
-			/* don't know what to do know  */
-			pr_debug("unknown AUTH_ALG (%d)\n", param->value);
-			result = -EINVAL;
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return result;
-}
-
-/* SIOCSIWAUTH */
-static int p80211_wext_get_iwauth(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	wlandevice_t *wlandev = dev->ml_priv;
-	struct iw_param *param = &wrqu->param;
-	int result = 0;
-
-	pr_debug("get_iwauth flags[%d]\n", (int)param->flags & IW_AUTH_INDEX);
-
-	switch (param->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_DROP_UNENCRYPTED:
-		param->value =
-		    wlandev->hostwep & HOSTWEP_EXCLUDEUNENCRYPTED ? 1 : 0;
-		break;
-
-	case IW_AUTH_PRIVACY_INVOKED:
-		param->value =
-		    wlandev->hostwep & HOSTWEP_PRIVACYINVOKED ? 1 : 0;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		param->value =
-		    wlandev->hostwep & HOSTWEP_SHAREDKEY ?
-		    IW_AUTH_ALG_SHARED_KEY : IW_AUTH_ALG_OPEN_SYSTEM;
-		break;
-
-	default:
-		break;
-	}
-
-	return result;
-}
-
-#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
-
-static iw_handler p80211wext_handlers[] = {
-	IW_IOCTL(SIOCSIWCOMMIT) = (iw_handler) p80211wext_siwcommit,
-	IW_IOCTL(SIOCGIWNAME) = (iw_handler) p80211wext_giwname,
-/* SIOCSIWNWID,SIOCGIWNWID */
-	IW_IOCTL(SIOCSIWFREQ) = (iw_handler) p80211wext_siwfreq,
-	IW_IOCTL(SIOCGIWFREQ) = (iw_handler) p80211wext_giwfreq,
-	IW_IOCTL(SIOCSIWMODE) = (iw_handler) p80211wext_siwmode,
-	IW_IOCTL(SIOCGIWMODE) = (iw_handler) p80211wext_giwmode,
-/* SIOCSIWSENS,SIOCGIWSENS,SIOCSIWRANGE */
-	IW_IOCTL(SIOCGIWRANGE) = (iw_handler) p80211wext_giwrange,
-/* SIOCSIWPRIV,SIOCGIWPRIV,SIOCSIWSTATS,SIOCGIWSTATS */
-	IW_IOCTL(SIOCSIWSPY) = (iw_handler) p80211wext_siwspy,
-	IW_IOCTL(SIOCGIWSPY) = (iw_handler) p80211wext_giwspy,
-/* SIOCSIWAP */
-	IW_IOCTL(SIOCGIWAP) = (iw_handler) p80211wext_giwap,
-/* SIOCGIWAPLIST */
-	IW_IOCTL(SIOCSIWSCAN) = (iw_handler) p80211wext_siwscan,
-	IW_IOCTL(SIOCGIWSCAN) = (iw_handler) p80211wext_giwscan,
-	IW_IOCTL(SIOCSIWESSID) = (iw_handler) p80211wext_siwessid,
-	IW_IOCTL(SIOCGIWESSID) = (iw_handler) p80211wext_giwessid,
-/* SIOCSIWNICKN */
-	IW_IOCTL(SIOCGIWNICKN) = (iw_handler) p80211wext_giwessid,
-/* SIOCSIWRATE */
-	IW_IOCTL(SIOCGIWRATE) = (iw_handler) p80211wext_giwrate,
-	IW_IOCTL(SIOCSIWRTS) = (iw_handler) p80211wext_siwrts,
-	IW_IOCTL(SIOCGIWRTS) = (iw_handler) p80211wext_giwrts,
-	IW_IOCTL(SIOCSIWFRAG) = (iw_handler) p80211wext_siwfrag,
-	IW_IOCTL(SIOCGIWFRAG) = (iw_handler) p80211wext_giwfrag,
-	IW_IOCTL(SIOCSIWTXPOW) = (iw_handler) p80211wext_siwtxpow,
-	IW_IOCTL(SIOCGIWTXPOW) = (iw_handler) p80211wext_giwtxpow,
-	IW_IOCTL(SIOCSIWRETRY) = (iw_handler) p80211wext_siwretry,
-	IW_IOCTL(SIOCGIWRETRY) = (iw_handler) p80211wext_giwretry,
-	IW_IOCTL(SIOCSIWENCODE) = (iw_handler) p80211wext_siwencode,
-	IW_IOCTL(SIOCGIWENCODE) = (iw_handler) p80211wext_giwencode,
-/* SIOCSIWPOWER,SIOCGIWPOWER */
-/* WPA operations */
-/* SIOCSIWGENIE,SIOCGIWGENIE generic IE */
-	IW_IOCTL(SIOCSIWAUTH) = (iw_handler) p80211_wext_set_iwauth, /*set authentication mode params */
-	IW_IOCTL(SIOCGIWAUTH) = (iw_handler) p80211_wext_get_iwauth, /*get authentication mode params */
-	IW_IOCTL(SIOCSIWENCODEEXT) = (iw_handler) p80211wext_set_encodeext, /*set encoding token & mode */
-	IW_IOCTL(SIOCGIWENCODEEXT) = (iw_handler) p80211wext_get_encodeext, /*get encoding token & mode */
-/* SIOCSIWPMKSA      PMKSA cache operation */
-};
-
-struct iw_handler_def p80211wext_handler_def = {
-	.num_standard = ARRAY_SIZE(p80211wext_handlers),
-	.standard = p80211wext_handlers,
-	.get_wireless_stats = p80211wext_get_wireless_stats
-};
-
-int p80211wext_event_associated(wlandevice_t *wlandev, int assoc)
-{
-	union iwreq_data data;
-
-	/* Send the association state first */
-	data.ap_addr.sa_family = ARPHRD_ETHER;
-	if (assoc)
-		memcpy(data.ap_addr.sa_data, wlandev->bssid, ETH_ALEN);
-	else
-		memset(data.ap_addr.sa_data, 0, ETH_ALEN);
-
-	if (wlan_wext_write)
-		wireless_send_event(wlandev->netdev, SIOCGIWAP, &data, NULL);
-
-	if (!assoc)
-		goto done;
-
-	/* XXX send association data, like IEs, etc etc. */
-
-done:
-	return 0;
-}
diff --git a/drivers/staging/wlan-ng/prism2fw.c b/drivers/staging/wlan-ng/prism2fw.c
index d20c8797bcc..fd5ddb29436 100644
--- a/drivers/staging/wlan-ng/prism2fw.c
+++ b/drivers/staging/wlan-ng/prism2fw.c
@@ -73,26 +73,26 @@ MODULE_FIRMWARE(PRISM2_USB_FWFILE);
 /*================================================================*/
 /* Local Types */
 
-typedef struct s3datarec {
+struct s3datarec {
 	u32 len;
 	u32 addr;
 	u8 checksum;
 	u8 *data;
-} s3datarec_t;
+};
 
-typedef struct s3plugrec {
+struct s3plugrec {
 	u32 itemcode;
 	u32 addr;
 	u32 len;
-} s3plugrec_t;
+};
 
-typedef struct s3crcrec {
+struct s3crcrec {
 	u32 addr;
 	u32 len;
 	unsigned int dowrite;
-} s3crcrec_t;
+};
 
-typedef struct s3inforec {
+struct s3inforec {
 	u16 len;
 	u16 type;
 	union {
@@ -101,20 +101,20 @@ typedef struct s3inforec {
 		u16 buildseq;
 		hfa384x_compident_t platform;
 	} info;
-} s3inforec_t;
+};
 
-typedef struct pda {
+struct pda {
 	u8 buf[HFA384x_PDA_LEN_MAX];
 	hfa384x_pdrec_t *rec[HFA384x_PDA_RECS_MAX];
 	unsigned int nrec;
-} pda_t;
+};
 
-typedef struct imgchunk {
+struct imgchunk {
 	u32 addr;	/* start address */
 	u32 len;	/* in bytes */
 	u16 crc;	/* CRC value (if it falls at a chunk boundary) */
 	u8 *data;
-} imgchunk_t;
+};
 
 /*================================================================*/
 /* Local Static Definitions */
@@ -124,26 +124,26 @@ typedef struct imgchunk {
 
 /* Data records */
 unsigned int ns3data;
-s3datarec_t s3data[S3DATA_MAX];
+struct s3datarec s3data[S3DATA_MAX];
 
 /* Plug records */
 unsigned int ns3plug;
-s3plugrec_t s3plug[S3PLUG_MAX];
+struct s3plugrec s3plug[S3PLUG_MAX];
 
 /* CRC records */
 unsigned int ns3crc;
-s3crcrec_t s3crc[S3CRC_MAX];
+struct s3crcrec s3crc[S3CRC_MAX];
 
 /* Info records */
 unsigned int ns3info;
-s3inforec_t s3info[S3INFO_MAX];
+struct s3inforec s3info[S3INFO_MAX];
 
 /* S7 record (there _better_ be only one) */
 u32 startaddr;
 
 /* Load image chunks */
 unsigned int nfchunks;
-imgchunk_t fchunk[CHUNKS_MAX];
+struct imgchunk fchunk[CHUNKS_MAX];
 
 /* Note that for the following pdrec_t arrays, the len and code */
 /*   fields are stored in HOST byte order. The mkpdrlist() function */
@@ -151,7 +151,7 @@ imgchunk_t fchunk[CHUNKS_MAX];
 /*----------------------------------------------------------------*/
 /* PDA, built from [card|newfile]+[addfile1+addfile2...] */
 
-pda_t pda;
+struct pda pda;
 hfa384x_compident_t nicid;
 hfa384x_caplevel_t rfid;
 hfa384x_caplevel_t macid;
@@ -165,21 +165,21 @@ wlandevice_t *wlandev);
 
 static int read_fwfile(const struct ihex_binrec *rfptr);
 
-static int mkimage(imgchunk_t *clist, unsigned int *ccnt);
+static int mkimage(struct imgchunk *clist, unsigned int *ccnt);
 
-static int read_cardpda(pda_t *pda, wlandevice_t *wlandev);
+static int read_cardpda(struct pda *pda, wlandevice_t *wlandev);
 
-static int mkpdrlist(pda_t *pda);
+static int mkpdrlist(struct pda *pda);
 
-static int plugimage(imgchunk_t *fchunk, unsigned int nfchunks,
-	      s3plugrec_t *s3plug, unsigned int ns3plug, pda_t * pda);
+static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
+	      struct s3plugrec *s3plug, unsigned int ns3plug, struct pda * pda);
 
-static int crcimage(imgchunk_t *fchunk, unsigned int nfchunks,
-	     s3crcrec_t *s3crc, unsigned int ns3crc);
+static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
+	     struct s3crcrec *s3crc, unsigned int ns3crc);
 
-static int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
+static int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
 	       unsigned int nfchunks);
-static void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks);
+static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks);
 
 static void free_srecs(void);
 
@@ -239,7 +239,7 @@ int prism2_fwtry(struct usb_device *udev, wlandevice_t *wlandev)
 int prism2_fwapply(const struct ihex_binrec *rfptr, wlandevice_t *wlandev)
 {
 	signed int result = 0;
-	p80211msg_dot11req_mibget_t getmsg;
+	struct p80211msg_dot11req_mibget getmsg;
 	p80211itemd_t *item;
 	u32 *data;
 
@@ -375,8 +375,8 @@ int prism2_fwapply(const struct ihex_binrec *rfptr, wlandevice_t *wlandev)
 *	0	success
 *	~0	failure
 ----------------------------------------------------------------*/
-int crcimage(imgchunk_t *fchunk, unsigned int nfchunks, s3crcrec_t *s3crc,
-	     unsigned int ns3crc)
+int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
+	     struct s3crcrec *s3crc, unsigned int ns3crc)
 {
 	int result = 0;
 	int i;
@@ -397,15 +397,14 @@ int crcimage(imgchunk_t *fchunk, unsigned int nfchunks, s3crcrec_t *s3crc,
 		for (c = 0; c < nfchunks; c++) {
 			cstart = fchunk[c].addr;
 			cend = fchunk[c].addr + fchunk[c].len;
-			/*  the line below does an address & len match search */
-			/*  unfortunately, I've found that the len fields of */
-			/*  some crc records don't match with the length of */
-			/*  the actual data, so we're not checking right */
-			/*  now */
-			/* if ( crcstart-2 >= cstart && crcend <= cend ) break; */
+			/* the line below does an address & len match search */
+			/* unfortunately, I've found that the len fields of */
+			/* some crc records don't match with the length of */
+			/* the actual data, so we're not checking right now */
+			/* if (crcstart-2 >= cstart && crcend <= cend) break; */
 
 			/* note the -2 below, it's to make sure the chunk has */
-			/*   space for the CRC value */
+			/* space for the CRC value */
 			if (crcstart - 2 >= cstart && crcstart < cend)
 				break;
 		}
@@ -440,7 +439,7 @@ int crcimage(imgchunk_t *fchunk, unsigned int nfchunks, s3crcrec_t *s3crc,
 * Returns:
 *	nothing
 ----------------------------------------------------------------*/
-void free_chunks(imgchunk_t *fchunk, unsigned int *nfchunks)
+void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks)
 {
 	int i;
 	for (i = 0; i < *nfchunks; i++) {
@@ -490,7 +489,7 @@ void free_srecs(void)
 *	0	- success
 *	~0	- failure (probably an errno)
 ----------------------------------------------------------------*/
-int mkimage(imgchunk_t *clist, unsigned int *ccnt)
+int mkimage(struct imgchunk *clist, unsigned int *ccnt)
 {
 	int result = 0;
 	int i;
@@ -583,7 +582,7 @@ int mkimage(imgchunk_t *clist, unsigned int *ccnt)
 *	0	- success
 *	~0	- failure (probably an errno)
 ----------------------------------------------------------------*/
-int mkpdrlist(pda_t *pda)
+int mkpdrlist(struct pda *pda)
 {
 	int result = 0;
 	u16 *pda16 = (u16 *) pda->buf;
@@ -656,8 +655,8 @@ int mkpdrlist(pda_t *pda)
 *	0	success
 *	~0	failure
 ----------------------------------------------------------------*/
-int plugimage(imgchunk_t *fchunk, unsigned int nfchunks,
-	      s3plugrec_t *s3plug, unsigned int ns3plug, pda_t * pda)
+int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
+	      struct s3plugrec *s3plug, unsigned int ns3plug, struct pda * pda)
 {
 	int result = 0;
 	int i;			/* plug index */
@@ -675,7 +674,7 @@ int plugimage(imgchunk_t *fchunk, unsigned int nfchunks,
 		pstart = s3plug[i].addr;
 		pend = s3plug[i].addr + s3plug[i].len;
 		/* find the matching PDR (or filename) */
-		if (s3plug[i].itemcode != 0xffffffffUL) {	/* not filename */
+		if (s3plug[i].itemcode != 0xffffffffUL) { /* not filename */
 			for (j = 0; j < pda->nrec; j++) {
 				if (s3plug[i].itemcode ==
 				    le16_to_cpu(pda->rec[j]->code))
@@ -684,7 +683,7 @@ int plugimage(imgchunk_t *fchunk, unsigned int nfchunks,
 		} else {
 			j = -1;
 		}
-		if (j >= pda->nrec && j != -1) {	/*  if no matching PDR, fail */
+		if (j >= pda->nrec && j != -1) { /*  if no matching PDR, fail */
 			printk(KERN_WARNING
 			       "warning: Failed to find PDR for "
 			       "plugrec 0x%04x.\n", s3plug[i].itemcode);
@@ -764,10 +763,10 @@ int plugimage(imgchunk_t *fchunk, unsigned int nfchunks,
 *	0	- success
 *	~0	- failure (probably an errno)
 ----------------------------------------------------------------*/
-int read_cardpda(pda_t *pda, wlandevice_t *wlandev)
+int read_cardpda(struct pda *pda, wlandevice_t *wlandev)
 {
 	int result = 0;
-	p80211msg_p2req_readpda_t msg;
+	struct p80211msg_p2req_readpda msg;
 
 	/* set up the msg */
 	msg.msgcode = DIDmsg_p2req_readpda;
@@ -839,7 +838,7 @@ int read_cardpda(pda_t *pda, wlandevice_t *wlandev)
 *                ssssttttdd..dd
 *                s - Size in words (little endian)
 *                t - Info type (little endian), see #defines and
-*                    s3inforec_t for details about types.
+*                    struct s3inforec for details about types.
 *                d - (s - 1) little endian words giving the contents of
 *                    the given info type.
 *
@@ -978,13 +977,13 @@ int read_fwfile(const struct ihex_binrec *record)
 *	0	success
 *	~0	failure
 ----------------------------------------------------------------*/
-int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
+int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
 	       unsigned int nfchunks)
 {
 	int result = 0;
-	p80211msg_p2req_ramdl_state_t rstatemsg;
-	p80211msg_p2req_ramdl_write_t rwritemsg;
-	p80211msg_t *msgp;
+	struct p80211msg_p2req_ramdl_state rstatemsg;
+	struct p80211msg_p2req_ramdl_write rwritemsg;
+	struct p80211msg *msgp;
 	u32 resultcode;
 	int i;
 	int j;
@@ -1030,7 +1029,7 @@ int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
 	rstatemsg.enable.data = P80211ENUM_truth_true;
 	rstatemsg.exeaddr.data = startaddr;
 
-	msgp = (p80211msg_t *) &rstatemsg;
+	msgp = (struct p80211msg *) &rstatemsg;
 	result = prism2mgmt_ramdl_state(wlandev, msgp);
 	if (result) {
 		printk(KERN_ERR
@@ -1052,11 +1051,12 @@ int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
 		nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0;
 		curroff = 0;
 		for (j = 0; j < nwrites; j++) {
-			currlen =
-			    (fchunk[i].len - (WRITESIZE_MAX * j)) >
-			    WRITESIZE_MAX ? WRITESIZE_MAX : (fchunk[i].len -
-							     (WRITESIZE_MAX *
-							      j));
+			/* TODO Move this to a separate function */
+			int lenleft = fchunk[i].len - (WRITESIZE_MAX * j);
+			if (fchunk[i].len > WRITESIZE_MAX)
+				currlen = WRITESIZE_MAX;
+			else
+				currlen = lenleft;
 			curroff = j * WRITESIZE_MAX;
 			currdaddr = fchunk[i].addr + curroff;
 			/* Setup the message */
@@ -1070,7 +1070,7 @@ int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
 			    ("Sending xxxdl_write message addr=%06x len=%d.\n",
 			     currdaddr, currlen);
 
-			msgp = (p80211msg_t *) &rwritemsg;
+			msgp = (struct p80211msg *) &rwritemsg;
 			result = prism2mgmt_ramdl_write(wlandev, msgp);
 
 			/* Check the results */
@@ -1097,7 +1097,7 @@ int writeimage(wlandevice_t *wlandev, imgchunk_t *fchunk,
 	rstatemsg.enable.data = P80211ENUM_truth_false;
 	rstatemsg.exeaddr.data = 0;
 
-	msgp = (p80211msg_t *) &rstatemsg;
+	msgp = (struct p80211msg *) &rstatemsg;
 	result = prism2mgmt_ramdl_state(wlandev, msgp);
 	if (result) {
 		printk(KERN_ERR
diff --git a/drivers/staging/wlan-ng/prism2mgmt.c b/drivers/staging/wlan-ng/prism2mgmt.c
index 4d1cdfc3542..04514a85d10 100644
--- a/drivers/staging/wlan-ng/prism2mgmt.c
+++ b/drivers/staging/wlan-ng/prism2mgmt.c
@@ -117,7 +117,7 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_dot11req_scan_t *msg = msgp;
+	struct p80211msg_dot11req_scan *msg = msgp;
 	u16 roamingmode, word;
 	int i, timeout;
 	int istmpenable = 0;
@@ -361,13 +361,13 @@ exit:
 int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 {
 	int result = 0;
-	p80211msg_dot11req_scan_results_t *req;
+	struct p80211msg_dot11req_scan_results *req;
 	hfa384x_t *hw = wlandev->priv;
 	hfa384x_HScanResultSub_t *item = NULL;
 
 	int count;
 
-	req = (p80211msg_dot11req_scan_results_t *) msgp;
+	req = (struct p80211msg_dot11req_scan_results *) msgp;
 
 	req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
 
@@ -463,6 +463,8 @@ int prism2mgmt_scan_results(wlandevice_t *wlandev, void *msgp)
 
 	/* capinfo bits */
 	count = le16_to_cpu(item->capinfo);
+	req->capinfo.status = P80211ENUM_msgitem_status_data_ok;
+	req->capinfo.data = count;
 
 	/* privacy flag */
 	req->privacy.status = P80211ENUM_msgitem_status_data_ok;
@@ -511,7 +513,7 @@ int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_dot11req_start_t *msg = msgp;
+	struct p80211msg_dot11req_start *msg = msgp;
 
 	p80211pstrd_t *pstr;
 	u8 bytebuf[80];
@@ -687,7 +689,7 @@ done:
 int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_p2req_readpda_t *msg = msgp;
+	struct p80211msg_p2req_readpda *msg = msgp;
 	int result;
 
 	/* We only support collecting the PDA when in the FWLOAD
@@ -753,7 +755,7 @@ int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
 int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_p2req_ramdl_state_t *msg = msgp;
+	struct p80211msg_p2req_ramdl_state *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
@@ -809,7 +811,7 @@ int prism2mgmt_ramdl_state(wlandevice_t *wlandev, void *msgp)
 int prism2mgmt_ramdl_write(wlandevice_t *wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_p2req_ramdl_write_t *msg = msgp;
+	struct p80211msg_p2req_ramdl_write *msg = msgp;
 	u32 addr;
 	u32 len;
 	u8 *buf;
@@ -872,7 +874,7 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 {
 	int result = 0;
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_p2req_flashdl_state_t *msg = msgp;
+	struct p80211msg_p2req_flashdl_state *msg = msgp;
 
 	if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
 		printk(KERN_ERR
@@ -942,7 +944,7 @@ int prism2mgmt_flashdl_state(wlandevice_t *wlandev, void *msgp)
 int prism2mgmt_flashdl_write(wlandevice_t *wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
-	p80211msg_p2req_flashdl_write_t *msg = msgp;
+	struct p80211msg_p2req_flashdl_write *msg = msgp;
 	u32 addr;
 	u32 len;
 	u8 *buf;
@@ -1006,7 +1008,7 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 	int result = 0;
 	u16 reg;
 	u16 port_type;
-	p80211msg_lnxreq_autojoin_t *msg = msgp;
+	struct p80211msg_lnxreq_autojoin *msg = msgp;
 	p80211pstrd_t *pstr;
 	u8 bytebuf[256];
 	hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t *) bytebuf;
@@ -1074,7 +1076,7 @@ int prism2mgmt_autojoin(wlandevice_t *wlandev, void *msgp)
 int prism2mgmt_wlansniff(wlandevice_t *wlandev, void *msgp)
 {
 	int result = 0;
-	p80211msg_lnxreq_wlansniff_t *msg = msgp;
+	struct p80211msg_lnxreq_wlansniff *msg = msgp;
 
 	hfa384x_t *hw = wlandev->priv;
 	u16 word;
diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c
index 0b0ec9c59a5..d3a06fa0b4f 100644
--- a/drivers/staging/wlan-ng/prism2mib.c
+++ b/drivers/staging/wlan-ng/prism2mib.c
@@ -79,7 +79,7 @@
 #define  F_READ       0x2	/* MIB may be read. */
 #define  F_WRITE      0x4	/* MIB may be written. */
 
-typedef struct mibrec {
+struct mibrec {
 	u32 did;
 	u16 flag;
 	u16 parm1;
@@ -89,63 +89,63 @@ typedef struct mibrec {
 		     int isget,
 		     wlandevice_t *wlandev,
 		     hfa384x_t *hw,
-		     p80211msg_dot11req_mibset_t *msg, void *data);
-} mibrec_t;
+		     struct p80211msg_dot11req_mibset *msg, void *data);
+};
 
-static int prism2mib_bytearea2pstr(mibrec_t *mib,
+static int prism2mib_bytearea2pstr(struct mibrec *mib,
 				   int isget,
 				   wlandevice_t *wlandev,
 				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   struct p80211msg_dot11req_mibset *msg,
 				   void *data);
 
-static int prism2mib_uint32(mibrec_t *mib,
+static int prism2mib_uint32(struct mibrec *mib,
 			    int isget,
 			    wlandevice_t *wlandev,
 			    hfa384x_t *hw,
-			    p80211msg_dot11req_mibset_t *msg, void *data);
+			    struct p80211msg_dot11req_mibset *msg, void *data);
 
-static int prism2mib_flag(mibrec_t *mib,
+static int prism2mib_flag(struct mibrec *mib,
 			  int isget,
 			  wlandevice_t *wlandev,
 			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data);
+			  struct p80211msg_dot11req_mibset *msg, void *data);
 
-static int prism2mib_wepdefaultkey(mibrec_t *mib,
+static int prism2mib_wepdefaultkey(struct mibrec *mib,
 				   int isget,
 				   wlandevice_t *wlandev,
 				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   struct p80211msg_dot11req_mibset *msg,
 				   void *data);
 
-static int prism2mib_privacyinvoked(mibrec_t *mib,
+static int prism2mib_privacyinvoked(struct mibrec *mib,
 				    int isget,
 				    wlandevice_t *wlandev,
 				    hfa384x_t *hw,
-				    p80211msg_dot11req_mibset_t *msg,
+				    struct p80211msg_dot11req_mibset *msg,
 				    void *data);
 
-static int prism2mib_excludeunencrypted(mibrec_t *mib,
+static int prism2mib_excludeunencrypted(struct mibrec *mib,
 					int isget,
 					wlandevice_t *wlandev,
 					hfa384x_t *hw,
-					p80211msg_dot11req_mibset_t *msg,
+					struct p80211msg_dot11req_mibset *msg,
 					void *data);
 
-static int prism2mib_fragmentationthreshold(mibrec_t *mib,
+static int prism2mib_fragmentationthreshold(struct mibrec *mib,
 					    int isget,
 					    wlandevice_t *wlandev,
 					    hfa384x_t *hw,
-					    p80211msg_dot11req_mibset_t *msg,
+					    struct p80211msg_dot11req_mibset *msg,
 					    void *data);
 
-static int prism2mib_priv(mibrec_t *mib,
+static int prism2mib_priv(struct mibrec *mib,
 			  int isget,
 			  wlandevice_t *wlandev,
 			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data);
+			  struct p80211msg_dot11req_mibset *msg, void *data);
 
-static mibrec_t mibtab[] = {
+static struct mibrec mibtab[] = {
 
 	/* dot11smt MIB's */
 	{DIDmib_dot11smt_dot11WEPDefaultKeysTable_dot11WEPDefaultKey0,
@@ -261,11 +261,11 @@ int prism2mgmt_mibset_mibget(wlandevice_t *wlandev, void *msgp)
 {
 	hfa384x_t *hw = wlandev->priv;
 	int result, isget;
-	mibrec_t *mib;
+	struct mibrec *mib;
 
 	u16 which;
 
-	p80211msg_dot11req_mibset_t *msg = msgp;
+	struct p80211msg_dot11req_mibset *msg = msgp;
 	p80211itemd_t *mibitem;
 
 	msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
@@ -371,11 +371,11 @@ done:
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_bytearea2pstr(mibrec_t *mib,
+static int prism2mib_bytearea2pstr(struct mibrec *mib,
 				   int isget,
 				   wlandevice_t *wlandev,
 				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   struct p80211msg_dot11req_mibset *msg,
 				   void *data)
 {
 	int result;
@@ -421,11 +421,11 @@ static int prism2mib_bytearea2pstr(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_uint32(mibrec_t *mib,
+static int prism2mib_uint32(struct mibrec *mib,
 			    int isget,
 			    wlandevice_t *wlandev,
 			    hfa384x_t *hw,
-			    p80211msg_dot11req_mibset_t *msg, void *data)
+			    struct p80211msg_dot11req_mibset *msg, void *data)
 {
 	int result;
 	u32 *uint32 = (u32 *) data;
@@ -468,11 +468,11 @@ static int prism2mib_uint32(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_flag(mibrec_t *mib,
+static int prism2mib_flag(struct mibrec *mib,
 			  int isget,
 			  wlandevice_t *wlandev,
 			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data)
+			  struct p80211msg_dot11req_mibset *msg, void *data)
 {
 	int result;
 	u32 *uint32 = (u32 *) data;
@@ -525,11 +525,11 @@ static int prism2mib_flag(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_wepdefaultkey(mibrec_t *mib,
+static int prism2mib_wepdefaultkey(struct mibrec *mib,
 				   int isget,
 				   wlandevice_t *wlandev,
 				   hfa384x_t *hw,
-				   p80211msg_dot11req_mibset_t *msg,
+				   struct p80211msg_dot11req_mibset *msg,
 				   void *data)
 {
 	int result;
@@ -575,11 +575,11 @@ static int prism2mib_wepdefaultkey(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_privacyinvoked(mibrec_t *mib,
+static int prism2mib_privacyinvoked(struct mibrec *mib,
 				    int isget,
 				    wlandevice_t *wlandev,
 				    hfa384x_t *hw,
-				    p80211msg_dot11req_mibset_t *msg,
+				    struct p80211msg_dot11req_mibset *msg,
 				    void *data)
 {
 	int result;
@@ -621,11 +621,11 @@ static int prism2mib_privacyinvoked(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_excludeunencrypted(mibrec_t *mib,
+static int prism2mib_excludeunencrypted(struct mibrec *mib,
 					int isget,
 					wlandevice_t *wlandev,
 					hfa384x_t *hw,
-					p80211msg_dot11req_mibset_t *msg,
+					struct p80211msg_dot11req_mibset *msg,
 					void *data)
 {
 	int result;
@@ -660,11 +660,11 @@ static int prism2mib_excludeunencrypted(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_fragmentationthreshold(mibrec_t *mib,
+static int prism2mib_fragmentationthreshold(struct mibrec *mib,
 					    int isget,
 					    wlandevice_t *wlandev,
 					    hfa384x_t *hw,
-					    p80211msg_dot11req_mibset_t *msg,
+					    struct p80211msg_dot11req_mibset *msg,
 					    void *data)
 {
 	int result;
@@ -709,11 +709,11 @@ static int prism2mib_fragmentationthreshold(mibrec_t *mib,
 *
 ----------------------------------------------------------------*/
 
-static int prism2mib_priv(mibrec_t *mib,
+static int prism2mib_priv(struct mibrec *mib,
 			  int isget,
 			  wlandevice_t *wlandev,
 			  hfa384x_t *hw,
-			  p80211msg_dot11req_mibset_t *msg, void *data)
+			  struct p80211msg_dot11req_mibset *msg, void *data)
 {
 	p80211pstrd_t *pstr = (p80211pstrd_t *) data;
 
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
index 6cd09352f89..ed751f418db 100644
--- a/drivers/staging/wlan-ng/prism2sta.c
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -83,8 +83,6 @@
 #include "hfa384x.h"
 #include "prism2mgmt.h"
 
-#define wlan_hexchar(x) (((x) < 0x0a) ? ('0' + (x)) : ('a' + ((x) - 0x0a)))
-
 /* Create a string of printable chars from something that might not be */
 /* It's recommended that the str be 4*len + 1 bytes long */
 #define wlan_mkprintstr(buf, buflen, str, strlen) \
@@ -99,8 +97,8 @@
 		} else { \
 			(str)[j] = '\\'; \
 			(str)[j+1] = 'x'; \
-			(str)[j+2] = wlan_hexchar(((buf)[i] & 0xf0) >> 4); \
-			(str)[j+3] = wlan_hexchar(((buf)[i] & 0x0f)); \
+			(str)[j+2] = hex_asc_hi((buf)[i]); \
+			(str)[j+3] = hex_asc_lo((buf)[i]); \
 			j += 4; \
 		} \
 	} \
@@ -124,13 +122,17 @@ MODULE_PARM_DESC(prism2_reset_settletime, "reset settle time in ms");
 
 MODULE_LICENSE("Dual MPL/GPL");
 
+void prism2_connect_result(wlandevice_t *wlandev, u8 failed);
+void prism2_disconnected(wlandevice_t *wlandev);
+void prism2_roamed(wlandevice_t *wlandev);
+
 static int prism2sta_open(wlandevice_t *wlandev);
 static int prism2sta_close(wlandevice_t *wlandev);
 static void prism2sta_reset(wlandevice_t *wlandev);
 static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
-			     p80211_hdr_t *p80211_hdr,
-			     p80211_metawep_t *p80211_wep);
-static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg);
+			     union p80211_hdr *p80211_hdr,
+			     struct p80211_metawep *p80211_wep);
+static int prism2sta_mlmerequest(wlandevice_t *wlandev, struct p80211msg *msg);
 static int prism2sta_getcardinfo(wlandevice_t *wlandev);
 static int prism2sta_globalsetup(wlandevice_t *wlandev);
 static int prism2sta_setmulticast(wlandevice_t *wlandev, netdevice_t *dev);
@@ -266,8 +268,8 @@ static void prism2sta_reset(wlandevice_t *wlandev)
 *	process thread
 ----------------------------------------------------------------*/
 static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
-			     p80211_hdr_t *p80211_hdr,
-			     p80211_metawep_t *p80211_wep)
+			     union p80211_hdr *p80211_hdr,
+			     struct p80211_metawep *p80211_wep)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 	int result;
@@ -307,7 +309,7 @@ static int prism2sta_txframe(wlandevice_t *wlandev, struct sk_buff *skb,
 * Call context:
 *	process thread
 ----------------------------------------------------------------*/
-static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
+static int prism2sta_mlmerequest(wlandevice_t *wlandev, struct p80211msg *msg)
 {
 	hfa384x_t *hw = (hfa384x_t *) wlandev->priv;
 
@@ -364,9 +366,9 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 		break;		/* ignore me. */
 	case DIDmsg_lnxreq_ifstate:
 		{
-			p80211msg_lnxreq_ifstate_t *ifstatemsg;
+			struct p80211msg_lnxreq_ifstate *ifstatemsg;
 			pr_debug("Received mlme ifstate request\n");
-			ifstatemsg = (p80211msg_lnxreq_ifstate_t *) msg;
+			ifstatemsg = (struct p80211msg_lnxreq_ifstate *) msg;
 			result =
 			    prism2sta_ifstate(wlandev,
 					      ifstatemsg->ifstate.data);
@@ -385,11 +387,11 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 		result = prism2mgmt_autojoin(wlandev, msg);
 		break;
 	case DIDmsg_lnxreq_commsquality:{
-			p80211msg_lnxreq_commsquality_t *qualmsg;
+			struct p80211msg_lnxreq_commsquality *qualmsg;
 
 			pr_debug("Received commsquality request\n");
 
-			qualmsg = (p80211msg_lnxreq_commsquality_t *) msg;
+			qualmsg = (struct p80211msg_lnxreq_commsquality *) msg;
 
 			qualmsg->link.status =
 			    P80211ENUM_msgitem_status_data_ok;
@@ -401,6 +403,7 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
 			qualmsg->link.data = le16_to_cpu(hw->qual.CQ_currBSS);
 			qualmsg->level.data = le16_to_cpu(hw->qual.ASL_currBSS);
 			qualmsg->noise.data = le16_to_cpu(hw->qual.ANL_currFC);
+			qualmsg->txrate.data = hw->txrate;
 
 			break;
 		}
@@ -1300,6 +1303,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 			    (portstatus == HFA384x_PSTATUS_CONN_IBSS) ?
 			    WLAN_MACMODE_IBSS_STA : WLAN_MACMODE_ESS_STA;
 
+			/* signal back up to cfg80211 layer */
+			prism2_connect_result(wlandev, P80211ENUM_truth_false);
+
 			/* Get the ball rolling on the comms quality stuff */
 			prism2sta_commsqual_defer(&hw->commsqual_bh);
 		}
@@ -1315,25 +1321,16 @@ void prism2sta_processing_defer(struct work_struct *data)
 		 * Indicate Deauthentication
 		 * Block Transmits, Ignore receives of data frames
 		 */
-		if (hw->join_ap == 2) {
-			hfa384x_JoinRequest_data_t joinreq;
-			joinreq = hw->joinreq;
-			/* Send the join request */
-			hfa384x_drvr_setconfig(hw,
-					       HFA384x_RID_JOINREQUEST,
-					       &joinreq,
-					       HFA384x_RID_JOINREQUEST_LEN);
+		if (wlandev->netdev->type == ARPHRD_ETHER)
 			printk(KERN_INFO
-			    "linkstatus=DISCONNECTED (re-submitting join)\n");
-		} else {
-			if (wlandev->netdev->type == ARPHRD_ETHER)
-				printk(KERN_INFO
-				       "linkstatus=DISCONNECTED (unhandled)\n");
-		}
+			       "linkstatus=DISCONNECTED (unhandled)\n");
 		wlandev->macmode = WLAN_MACMODE_NONE;
 
 		netif_carrier_off(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_disconnected(wlandev);
+
 		break;
 
 	case HFA384x_LINK_AP_CHANGE:
@@ -1376,6 +1373,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 		hw->link_status = HFA384x_LINK_CONNECTED;
 		netif_carrier_on(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_roamed(wlandev);
+
 		break;
 
 	case HFA384x_LINK_AP_OUTOFRANGE:
@@ -1435,6 +1435,9 @@ void prism2sta_processing_defer(struct work_struct *data)
 
 		netif_carrier_off(wlandev->netdev);
 
+		/* signal back up to cfg80211 layer */
+		prism2_connect_result(wlandev, P80211ENUM_truth_true);
+
 		break;
 
 	default:
@@ -1446,7 +1449,6 @@ void prism2sta_processing_defer(struct work_struct *data)
 	}
 
 	wlandev->linkstatus = (hw->link_status == HFA384x_LINK_CONNECTED);
-	p80211wext_event_associated(wlandev, wlandev->linkstatus);
 
 failed:
 	return;
@@ -1985,6 +1987,9 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 	hfa384x_t *hw = container_of(data, struct hfa384x, commsqual_bh);
 	wlandevice_t *wlandev = hw->wlandev;
 	hfa384x_bytestr32_t ssid;
+	struct p80211msg_dot11req_mibget msg;
+	p80211item_uint32_t *mibitem = (p80211item_uint32_t *)
+						&msg.mibattribute.data;
 	int result = 0;
 
 	if (hw->wlandev->hwremoved)
@@ -2013,6 +2018,34 @@ void prism2sta_commsqual_defer(struct work_struct *data)
 			 le16_to_cpu(hw->qual.ANL_currFC));
 	}
 
+	/* Get the signal rate */
+	msg.msgcode = DIDmsg_dot11req_mibget;
+	mibitem->did = DIDmib_p2_p2MAC_p2CurrentTxRate;
+	result = p80211req_dorequest(wlandev, (u8 *) &msg);
+
+	if (result) {
+		pr_debug("get signal rate failed, result = %d\n",
+			 result);
+		goto done;
+	}
+
+	switch (mibitem->data) {
+	case HFA384x_RATEBIT_1:
+		hw->txrate = 10;
+		break;
+	case HFA384x_RATEBIT_2:
+		hw->txrate = 20;
+		break;
+	case HFA384x_RATEBIT_5dot5:
+		hw->txrate = 55;
+		break;
+	case HFA384x_RATEBIT_11:
+		hw->txrate = 110;
+		break;
+	default:
+		pr_debug("Bad ratebit (%d)\n", mibitem->data);
+	}
+
 	/* Lastly, we need to make sure the BSSID didn't change on us */
 	result = hfa384x_drvr_getconfig(hw,
 					HFA384x_RID_CURRENTBSSID,
diff --git a/drivers/staging/wlan-ng/prism2usb.c b/drivers/staging/wlan-ng/prism2usb.c
index f5cff751db2..4efa027a81e 100644
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -119,7 +119,7 @@ static int prism2sta_probe_usb(struct usb_interface *interface,
 	}
 	hw = wlandev->priv;
 
-	if (wlan_setup(wlandev) != 0) {
+	if (wlan_setup(wlandev, &(interface->dev)) != 0) {
 		printk(KERN_ERR "%s: wlan_setup() failed.\n", dev_info);
 		result = -EIO;
 		goto failed;
diff --git a/drivers/staging/xgifb/XGI.h b/drivers/staging/xgifb/XGI.h
deleted file mode 100644
index 87803dd032d..00000000000
--- a/drivers/staging/xgifb/XGI.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _XGI_H
-#define _XGI_H
-
-#if 1
-#define TWDEBUG(x)
-#else
-#define TWDEBUG(x) printk(KERN_INFO x "\n");
-#endif
-
-#endif
diff --git a/drivers/staging/xgifb/XGI_accel.c b/drivers/staging/xgifb/XGI_accel.c
index 86ec3421942..79549742cff 100644
--- a/drivers/staging/xgifb/XGI_accel.c
+++ b/drivers/staging/xgifb/XGI_accel.c
@@ -37,37 +37,17 @@
 #include <linux/agp_backend.h>
 
 #include <linux/types.h>
-/*
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include <linux/XGIfb.h>
-#else
-#include <video/XGIfb.h>
-#endif
-*/
 #include <asm/io.h>
 
 #ifdef CONFIG_MTRR
 #include <asm/mtrr.h>
 #endif
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-#include <video/fbcon.h>
-#include <video/fbcon-cfb8.h>
-#include <video/fbcon-cfb16.h>
-#include <video/fbcon-cfb24.h>
-#include <video/fbcon-cfb32.h>
-#endif
-
-#include "osdef.h"
 #include "vgatypes.h"
 #include "vb_struct.h"
 #include "XGIfb.h"
 #include "XGI_accel.h"
 
-
-extern struct     video_info xgi_video_info;
-extern int XGIfb_accel;
-
 static const int XGIALUConv[] =
 {
     0x00,       /* dest = 0;            0,      GXclear,        0 */
@@ -108,109 +88,17 @@ static const int XGIPatALUConv[] =
     0xFF,       /* dest = 0xFF;         1,      GXset,          0xF */
 };
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
 static const unsigned char myrops[] = {
    	3, 10, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3
    };
-#endif
 
 /* 300 series */
-#if 0
-static void
-XGI300Sync(void)
-{
-	XGI300Idle
-}
-#endif
 static void
 XGI310Sync(void)
 {
 	XGI310Idle
 }
-#if 0
-static void
-XGI300SetupForScreenToScreenCopy(int xdir, int ydir, int rop,
-                                unsigned int planemask, int trans_color)
-{
-	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
-	XGI300SetupSRCPitch(xgi_video_info.video_linelength)
-	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
-
-	if(trans_color != -1) {
-		XGI300SetupROP(0x0A)
-		XGI300SetupSRCTrans(trans_color)
-		XGI300SetupCMDFlag(TRANSPARENT_BITBLT)
-	} else {
-	        XGI300SetupROP(XGIALUConv[rop])
-	}
-	if(xdir > 0) {
-		XGI300SetupCMDFlag(X_INC)
-	}
-	if(ydir > 0) {
-		XGI300SetupCMDFlag(Y_INC)
-	}
-}
-
-static void
-XGI300SubsequentScreenToScreenCopy(int src_x, int src_y, int dst_x, int dst_y,
-                                int width, int height)
-{
-	long srcbase, dstbase;
-
-	srcbase = dstbase = 0;
-	if (src_y >= 2048) {
-		srcbase = xgi_video_info.video_linelength * src_y;
-		src_y = 0;
-	}
-	if (dst_y >= 2048) {
-		dstbase = xgi_video_info.video_linelength * dst_y;
-		dst_y = 0;
-	}
-
-	XGI300SetupSRCBase(srcbase);
-	XGI300SetupDSTBase(dstbase);
-
-	if(!(xgi_video_info.CommandReg & X_INC))  {
-		src_x += width-1;
-		dst_x += width-1;
-	}
-	if(!(xgi_video_info.CommandReg & Y_INC))  {
-		src_y += height-1;
-		dst_y += height-1;
-	}
-	XGI300SetupRect(width, height)
-	XGI300SetupSRCXY(src_x, src_y)
-	XGI300SetupDSTXY(dst_x, dst_y)
-	XGI300DoCMD
-}
-
-static void
-XGI300SetupForSolidFill(int color, int rop, unsigned int planemask)
-{
-	XGI300SetupPATFG(color)
-	XGI300SetupDSTRect(xgi_video_info.video_linelength, 0xFFF)
-	XGI300SetupDSTColorDepth(xgi_video_info.DstColor);
-	XGI300SetupROP(XGIPatALUConv[rop])
-	XGI300SetupCMDFlag(PATFG)
-}
 
-static void
-XGI300SubsequentSolidFillRect(int x, int y, int w, int h)
-{
-	long dstbase;
-
-	dstbase = 0;
-	if(y >= 2048) {
-		dstbase = xgi_video_info.video_linelength * y;
-		y = 0;
-	}
-	XGI300SetupDSTBase(dstbase)
-	XGI300SetupDSTXY(x,y)
-	XGI300SetupRect(w,h)
-	XGI300SetupCMDFlag(X_INC | Y_INC | BITBLT)
-	XGI300DoCMD
-}
-#endif
 /* 310/325 series ------------------------------------------------ */
 
 static void
@@ -326,8 +214,6 @@ void XGIfb_syncaccel(void)
 
 }
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)  /* --- KERNEL 2.5.34 and later --- */
-
 int fbcon_XGI_sync(struct fb_info *info)
 {
     if(!XGIfb_accel) return 0;
@@ -399,198 +285,5 @@ void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 
 }
 
-#endif
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)  /* ------ KERNEL <2.5.34 ------ */
-
-void fbcon_XGI_bmove(struct display *p, int srcy, int srcx,
-			    int dsty, int dstx, int height, int width)
-{
-        int xdir, ydir;
-	CRITFLAGS
-
-	if(!xgi_video_info.accel) {
-	    switch(xgi_video_info.video_bpp) {
-	    case 8:
-#ifdef FBCON_HAS_CFB8
-	       fbcon_cfb8_bmove(p, srcy, srcx, dsty, dstx, height, width);
-#endif
-	       break;
-	    case 16:
-#ifdef FBCON_HAS_CFB16
-	       fbcon_cfb16_bmove(p, srcy, srcx, dsty, dstx, height, width);
-#endif
-	       break;
-	    case 32:
-#ifdef FBCON_HAS_CFB32
-	       fbcon_cfb32_bmove(p, srcy, srcx, dsty, dstx, height, width);
-#endif
-	       break;
-            }
-	    return;
-	}
-
-	srcx *= fontwidth(p);
-	srcy *= fontheight(p);
-	dstx *= fontwidth(p);
-	dsty *= fontheight(p);
-	width *= fontwidth(p);
-	height *= fontheight(p);
-
-	if(srcx < dstx) xdir = 0;
-	else            xdir = 1;
-	if(srcy < dsty) ydir = 0;
-	else            ydir = 1;
-
-
-	   CRITBEGIN
-	   XGI310SetupForScreenToScreenCopy(xdir, ydir, 3, 0, -1);
-	   XGI310SubsequentScreenToScreenCopy(srcx, srcy, dstx, dsty, width, height);
-	   CRITEND
-	   XGI310Sync();
-#if 0
-	   printk(KERN_INFO "XGI_bmove sx %d sy %d dx %d dy %d w %d h %d\n",
-		srcx, srcy, dstx, dsty, width, height);
-#endif
-
-}
-
-
-static void fbcon_XGI_clear(struct vc_data *conp, struct display *p,
-			int srcy, int srcx, int height, int width, int color)
-{
-	CRITFLAGS
-
-	srcx *= fontwidth(p);
-	srcy *= fontheight(p);
-	width *= fontwidth(p);
-	height *= fontheight(p);
-
-
-	   CRITBEGIN
-	   XGI310SetupForSolidFill(color, 3, 0);
-	   XGI310SubsequentSolidFillRect(srcx, srcy, width, height);
-	   CRITEND
-	   XGI310Sync();
-
-}
-
-void fbcon_XGI_clear8(struct vc_data *conp, struct display *p,
-			int srcy, int srcx, int height, int width)
-{
-	u32 bgx;
-
-	if(!xgi_video_info.accel) {
-#ifdef FBCON_HAS_CFB8
-	    fbcon_cfb8_clear(conp, p, srcy, srcx, height, width);
-#endif
-	    return;
-	}
-
-	bgx = attr_bgcol_ec(p, conp);
-	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
-}
-
-void fbcon_XGI_clear16(struct vc_data *conp, struct display *p,
-			int srcy, int srcx, int height, int width)
-{
-	u32 bgx;
-	if(!xgi_video_info.accel) {
-#ifdef FBCON_HAS_CFB16
-	    fbcon_cfb16_clear(conp, p, srcy, srcx, height, width);
-#endif
-	    return;
-	}
-
-	bgx = ((u_int16_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
-	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
-}
-
-void fbcon_XGI_clear32(struct vc_data *conp, struct display *p,
-			int srcy, int srcx, int height, int width)
-{
-	u32 bgx;
-
-	if(!xgi_video_info.accel) {
-#ifdef FBCON_HAS_CFB32
-	    fbcon_cfb32_clear(conp, p, srcy, srcx, height, width);
-#endif
-	    return;
-	}
-
-	bgx = ((u_int32_t*)p->dispsw_data)[attr_bgcol_ec(p, conp)];
-	fbcon_XGI_clear(conp, p, srcy, srcx, height, width, bgx);
-}
-
-void fbcon_XGI_revc(struct display *p, int srcx, int srcy)
-{
-	CRITFLAGS
-
-	if(!xgi_video_info.accel) {
-	    switch(xgi_video_info.video_bpp) {
-	    case 16:
-#ifdef FBCON_HAS_CFB16
-	       fbcon_cfb16_revc(p, srcx, srcy);
-#endif
-	       break;
-	    case 32:
-#ifdef FBCON_HAS_CFB32
-	       fbcon_cfb32_revc(p, srcx, srcy);
-#endif
-	       break;
-            }
-	    return;
-	}
-
-	srcx *= fontwidth(p);
-	srcy *= fontheight(p);
-
-
-	   CRITBEGIN
-	   XGI310SetupForSolidFill(0, 0x0a, 0);
-	   XGI310SubsequentSolidFillRect(srcx, srcy, fontwidth(p), fontheight(p));
-	   CRITEND
-	   XGI310Sync();
-
-}
-
-#ifdef FBCON_HAS_CFB8
-struct display_switch fbcon_XGI8 = {
-	setup:			fbcon_cfb8_setup,
-	bmove:			fbcon_XGI_bmove,
-	clear:			fbcon_XGI_clear8,
-	putc:			fbcon_cfb8_putc,
-	putcs:			fbcon_cfb8_putcs,
-	revc:			fbcon_cfb8_revc,
-	clear_margins:		fbcon_cfb8_clear_margins,
-	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
-};
-#endif
-#ifdef FBCON_HAS_CFB16
-struct display_switch fbcon_XGI16 = {
-	setup:			fbcon_cfb16_setup,
-	bmove:			fbcon_XGI_bmove,
-	clear:			fbcon_XGI_clear16,
-	putc:			fbcon_cfb16_putc,
-	putcs:			fbcon_cfb16_putcs,
-	revc:			fbcon_XGI_revc,
-	clear_margins:		fbcon_cfb16_clear_margins,
-	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
-};
-#endif
-#ifdef FBCON_HAS_CFB32
-struct display_switch fbcon_XGI32 = {
-	setup:			fbcon_cfb32_setup,
-	bmove:			fbcon_XGI_bmove,
-	clear:			fbcon_XGI_clear32,
-	putc:			fbcon_cfb32_putc,
-	putcs:			fbcon_cfb32_putcs,
-	revc:			fbcon_XGI_revc,
-	clear_margins:		fbcon_cfb32_clear_margins,
-	fontwidthmask:		FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16)
-};
-#endif
-
-#endif /* KERNEL VERSION */
 
 
diff --git a/drivers/staging/xgifb/XGI_accel.h b/drivers/staging/xgifb/XGI_accel.h
index 04e126772bb..28c057994b3 100644
--- a/drivers/staging/xgifb/XGI_accel.h
+++ b/drivers/staging/xgifb/XGI_accel.h
@@ -491,21 +491,9 @@ void XGIfb_syncaccel(void);
 
 extern struct video_info xgi_video_info;
 
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,5,33)
-void fbcon_XGI_bmove(struct display *p, int srcy, int srcx, int dsty,
-                     int dstx, int height, int width);
-void fbcon_XGI_revc(struct display *p, int srcy, int srcx);
-void fbcon_XGI_clear8(struct vc_data *conp, struct display *p, int srcy,
-                      int srcx, int height, int width);
-void fbcon_XGI_clear16(struct vc_data *conp, struct display *p, int srcy,
-                       int srcx, int height, int width);
-void fbcon_XGI_clear32(struct vc_data *conp, struct display *p, int srcy,
-                       int srcx, int height, int width);
-#endif
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,34)
 extern int XGIfb_accel;
 void fbcon_XGI_fillrect(struct fb_info *info, const struct fb_fillrect *rect);
 void fbcon_XGI_copyarea(struct fb_info *info, const struct fb_copyarea *area);
-#endif
+
 
 #endif
diff --git a/drivers/staging/xgifb/XGI_main.h b/drivers/staging/xgifb/XGI_main.h
index 4f4171e8a68..fd1152eb2c9 100644
--- a/drivers/staging/xgifb/XGI_main.h
+++ b/drivers/staging/xgifb/XGI_main.h
@@ -42,17 +42,10 @@
 
 
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
 #define XGI_IOTYPE1 void __iomem
 #define XGI_IOTYPE2 __iomem
 #define XGIINITSTATIC static
-#else
-#define XGI_IOTYPE1 unsigned char
-#define XGI_IOTYPE2
-#define XGIINITSTATIC
-#endif
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 static struct pci_device_id __devinitdata xgifb_pci_table[] = {
 
 	{ PCI_VENDOR_ID_XG, PCI_DEVICE_ID_XG_20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -63,7 +56,7 @@ static struct pci_device_id __devinitdata xgifb_pci_table[] = {
 };
 
 MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
-#endif
+
 /* To be included in fb.h */
 #ifndef FB_ACCEL_XGI_GLAMOUR_2
 #define FB_ACCEL_XGI_GLAMOUR_2  40	/* XGI 315, 650, 740		*/
@@ -255,9 +248,6 @@ MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
 #define BRI_DRAM_SIZE_32MB        0x04
 #define BRI_DRAM_SIZE_64MB        0x05
 
-#define HW_DEVICE_EXTENSION	  XGI_HW_DEVICE_INFO
-#define PHW_DEVICE_EXTENSION      PXGI_HW_DEVICE_INFO
-
 #define SR_BUFFER_SIZE            5
 #define CR_BUFFER_SIZE            5
 
@@ -300,11 +290,7 @@ MODULE_DEVICE_TABLE(pci, xgifb_pci_table);
 /* ------------------- Global Variables ----------------------------- */
 
 /* Fbcon variables */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 static struct fb_info* fb_info;
-#else
-static struct fb_info XGI_fb_info;
-#endif
 
 
 static int    video_type = FB_TYPE_PACKED_PIXELS;
@@ -336,12 +322,8 @@ static struct fb_var_screeninfo default_var = {
 	.vsync_len	= 0,
 	.sync		= 0,
 	.vmode		= FB_VMODE_NONINTERLACED,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-	.reserved	= {0, 0, 0, 0, 0, 0}
-#endif
 };
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 static struct fb_fix_screeninfo XGIfb_fix = {
 	.id		= "XGI",
 	.type		= FB_TYPE_PACKED_PIXELS,
@@ -350,28 +332,7 @@ static struct fb_fix_screeninfo XGIfb_fix = {
 };
 static char myid[20];
 static u32 pseudo_palette[17];
-#endif
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-static struct display XGI_disp;
-
-static struct display_switch XGIfb_sw;
-
-static struct {
-	u16 blue, green, red, pad;
-} XGI_palette[256];
-
-static union {
-#ifdef FBCON_HAS_CFB16
-	u16 cfb16[16];
-#endif
-#ifdef FBCON_HAS_CFB32
-	u32 cfb32[16];
-#endif
-} XGI_fbcon_cmap;
-
-static int XGIfb_inverse = 0;
-#endif
 
 /* display status */
 static int XGIfb_off = 0;
@@ -380,9 +341,6 @@ static int XGIfb_forcecrt1 = -1;
 static int XGIvga_enabled = 0;
 static int XGIfb_userom = 0;
 //static int XGIfb_useoem = -1;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-static int currcon = 0;
-#endif
 
 /* global flags */
 static int XGIfb_registered;
@@ -415,10 +373,10 @@ unsigned char XGIfb_detectedlcda = 0xff;
 /* XGIfb_info XGIfbinfo; */
 
 /* TW: Hardware extension; contains data on hardware */
-HW_DEVICE_EXTENSION XGIhw_ext;
+struct xgi_hw_device_info XGIhw_ext;
 
 /* TW: XGI private structure */
-VB_DEVICE_INFO  XGI_Pr;
+struct vb_device_info  XGI_Pr;
 
 /* card parameters */
 static unsigned long XGIfb_mmio_size = 0;
@@ -530,29 +488,21 @@ struct _XGIbios_mode {
 
 /* mode-related variables */
 #ifdef MODULE
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 static int xgifb_mode_idx = 1;
 #else
-static int XGIfb_mode_idx = MODE_INDEX_NONE;  /* Don't use a mode by default if we are a module */
-#endif
-#else
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 static int xgifb_mode_idx = -1;               /* Use a default mode if we are inside the kernel */
-#else
-static int XGIfb_mode_idx = -1;
-#endif
 #endif
 u8  XGIfb_mode_no  = 0;
 u8  XGIfb_rate_idx = 0;
 
 /* TW: CR36 evaluation */
-const USHORT XGI300paneltype[] =
+const unsigned short XGI300paneltype[] =
     { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
       LCD_1280x960,  LCD_640x480,  LCD_1024x600,  LCD_1152x768,
        LCD_1024x768, LCD_1024x768,  LCD_1024x768,
       LCD_1024x768,  LCD_1024x768, LCD_1024x768,  LCD_1024x768 };
 
-const USHORT XGI310paneltype[] =
+const unsigned short XGI310paneltype[] =
     { LCD_UNKNOWN,   LCD_800x600,  LCD_1024x768,  LCD_1280x1024,
       LCD_640x480,   LCD_1024x600, LCD_1152x864,  LCD_1280x960,
       LCD_1152x768,  LCD_1400x1050,LCD_1280x768,  LCD_1600x1200,
@@ -648,17 +598,6 @@ static const struct _chswtable {
 	{ 0,      0,      ""       , ""       }
 };
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-/* Offscreen layout */
-typedef struct _XGI_GLYINFO {
-	unsigned char ch;
-	int fontwidth;
-	int fontheight;
-	u8 gmask[72];
-	int ngmask;
-} XGI_GLYINFO;
-#endif
-
 typedef struct _XGI_OH {
 	struct _XGI_OH *poh_next;
 	struct _XGI_OH *poh_prev;
@@ -852,50 +791,6 @@ XGIINITSTATIC int __init XGIfb_setup(char *options);
 
 
 /* fbdev routines */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-       int	XGIfb_init(void);
-static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix,
-			      int con,
-			      struct fb_info *info);
-static int      XGIfb_get_var(struct fb_var_screeninfo *var,
-			      int con,
-			      struct fb_info *info);
-static int      XGIfb_set_var(struct fb_var_screeninfo *var,
-			      int con,
-			      struct fb_info *info);
-static void     XGIfb_crtc_to_var(struct fb_var_screeninfo *var);
-static int      XGIfb_get_cmap(struct fb_cmap *cmap,
-			       int kspc,
-			       int con,
-			       struct fb_info *info);
-static int      XGIfb_set_cmap(struct fb_cmap *cmap,
-			       int kspc,
-			       int con,
-			       struct fb_info *info);
-static int      XGIfb_update_var(int con,
-				 struct fb_info *info);
-static int      XGIfb_switch(int con,
-			     struct fb_info *info);
-static void     XGIfb_blank(int blank,
-			    struct fb_info *info);
-static void     XGIfb_set_disp(int con,
-			       struct fb_var_screeninfo *var,
-                               struct fb_info *info);
-static int      XGI_getcolreg(unsigned regno, unsigned *red, unsigned *green,
-			      unsigned *blue, unsigned *transp,
-			      struct fb_info *fb_info);
-static void     XGIfb_do_install_cmap(int con,
-                                      struct fb_info *info);
-static void     XGI_get_glyph(struct fb_info *info,
-                              XGI_GLYINFO *gly);
-static int 	XGIfb_mmap(struct fb_info *info, struct file *file,
-		           struct vm_area_struct *vma);
-static int      XGIfb_ioctl(struct inode *inode, struct file *file,
-		       	    unsigned int cmd, unsigned long arg, int con,
-		       	    struct fb_info *info);
-#endif
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
 XGIINITSTATIC int __init xgifb_init(void);
 static int      XGIfb_set_par(struct fb_info *info);
 static int      XGIfb_blank(int blank,
@@ -907,36 +802,25 @@ extern void     fbcon_XGI_fillrect(struct fb_info *info,
                                    const struct fb_fillrect *rect);
 extern void     fbcon_XGI_copyarea(struct fb_info *info,
                                    const struct fb_copyarea *area);
-#if 0
-extern void     cfb_imageblit(struct fb_info *info,
-                              const struct fb_image *image);
-#endif
 extern int      fbcon_XGI_sync(struct fb_info *info);
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
 static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
 			    unsigned long arg);
-#else
-static int      XGIfb_ioctl(struct inode *inode,
-	 		    struct file *file,
-		       	    unsigned int cmd,
-			    unsigned long arg,
-		       	    struct fb_info *info);
-#endif
 
 /*
 extern int	XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr,
-			      PXGI_HW_DEVICE_INFO HwDeviceExtension,
+			      struct xgi_hw_device_info *HwDeviceExtension,
 			      unsigned char modeno, unsigned char rateindex);
-extern int      XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+extern int      XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, struct xgi_hw_device_info *HwDeviceExtension,
 			 unsigned char modeno, unsigned char rateindex,
 			 unsigned int *left_margin, unsigned int *right_margin,
 			 unsigned int *upper_margin, unsigned int *lower_margin,
 			 unsigned int *hsync_len, unsigned int *vsync_len,
 			 unsigned int *sync, unsigned int *vmode);
 */
-#endif
-			extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
+extern unsigned char XGI_SearchModeID(unsigned short ModeNo,
+				unsigned short *ModeIdIndex,
+				struct vb_device_info *);
 static int      XGIfb_get_fix(struct fb_fix_screeninfo *fix, int con,
 			      struct fb_info *info);
 
@@ -956,10 +840,10 @@ static int      XGIfb_do_set_var(struct fb_var_screeninfo *var, int isactive,
 static void     XGIfb_pre_setmode(void);
 static void     XGIfb_post_setmode(void);
 
-static BOOLEAN  XGIfb_CheckVBRetrace(void);
-static BOOLEAN  XGIfbcheckvretracecrt2(void);
-static BOOLEAN  XGIfbcheckvretracecrt1(void);
-static BOOLEAN  XGIfb_bridgeisslave(void);
+static unsigned char  XGIfb_CheckVBRetrace(void);
+static unsigned char  XGIfbcheckvretracecrt2(void);
+static unsigned char  XGIfbcheckvretracecrt1(void);
+static unsigned char  XGIfb_bridgeisslave(void);
 
 struct XGI_memreq {
 	unsigned long offset;
@@ -994,30 +878,40 @@ static XGI_OH   *XGIfb_poh_free(unsigned long base);
 static void     XGIfb_free_node(XGI_OH *poh);
 
 /* Internal routines to access PCI configuration space */
-BOOLEAN         XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
-	          	unsigned long offset, unsigned long set, unsigned long *value);
+unsigned char XGIfb_query_VGA_config_space(struct xgi_hw_device_info *pXGIhw_ext,
+					   unsigned long offset,
+					   unsigned long set,
+					   unsigned long *value);
 //BOOLEAN         XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 //	         	unsigned long offset, unsigned long set, unsigned long *value);
 
 
 /* Routines from init.c/init301.c */
-extern void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
-extern BOOLEAN  XGIInitNew(PXGI_HW_DEVICE_INFO HwDeviceExtension);
-extern BOOLEAN  XGISetModeNew(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo);
+extern void     InitTo330Pointer(unsigned char, struct vb_device_info *pVBInfo);
+extern unsigned char  XGIInitNew(struct xgi_hw_device_info *HwDeviceExtension);
+extern unsigned char XGISetModeNew(struct xgi_hw_device_info *HwDeviceExtension,
+				   unsigned short ModeNo);
 //extern void     XGI_SetEnableDstn(VB_DEVICE_INFO *XGI_Pr);
-extern void     XGI_LongWait(VB_DEVICE_INFO *XGI_Pr);
-extern USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
+extern void     XGI_LongWait(struct vb_device_info *XGI_Pr);
+extern unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
+					 unsigned short ModeNo,
+					 unsigned short ModeIdIndex,
+					 struct vb_device_info *pVBInfo);
 /* TW: Chrontel TV functions */
-extern USHORT 	XGI_GetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
-extern void 	XGI_SetCH700x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
-extern USHORT 	XGI_GetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
-extern void 	XGI_SetCH701x(VB_DEVICE_INFO *XGI_Pr, USHORT tempbx);
-extern void     XGI_SetCH70xxANDOR(VB_DEVICE_INFO *XGI_Pr, USHORT tempax,USHORT tempbh);
-extern void     XGI_DDC2Delay(VB_DEVICE_INFO *XGI_Pr, USHORT delaytime);
+extern unsigned short XGI_GetCH700x(struct vb_device_info *XGI_Pr,
+				    unsigned short tempbx);
+extern void XGI_SetCH700x(struct vb_device_info *XGI_Pr, unsigned short tempbx);
+extern unsigned short XGI_GetCH701x(struct vb_device_info *XGI_Pr,
+				    unsigned short tempbx);
+extern void XGI_SetCH701x(struct vb_device_info *XGI_Pr, unsigned short tempbx);
+extern void XGI_SetCH70xxANDOR(struct vb_device_info *XGI_Pr,
+			       unsigned short tempax,
+			       unsigned short tempbh);
+extern void XGI_DDC2Delay(struct vb_device_info *XGI_Pr, unsigned short delaytime);
 
 /* TW: Sensing routines */
 void            XGI_Sense30x(void);
 int             XGIDoSense(int tempbl, int tempbh, int tempcl, int tempch);
 
-extern XGI21_LVDSCapStruct XGI21_LCDCapList[13];
+extern struct XGI21_LVDSCapStruct XGI21_LCDCapList[13];
 #endif
diff --git a/drivers/staging/xgifb/XGI_main_26.c b/drivers/staging/xgifb/XGI_main_26.c
index 867012b48a0..976c39bb286 100644
--- a/drivers/staging/xgifb/XGI_main_26.c
+++ b/drivers/staging/xgifb/XGI_main_26.c
@@ -28,9 +28,6 @@
 #include <linux/fs.h>
 #include <linux/types.h>
 #include <linux/proc_fs.h>
-#include <linux/kernel.h>
-
-#include "osdef.h"
 
 
 #ifndef XGIFB_PAN
@@ -164,16 +161,15 @@ struct video_info  xgi_video_info;
 
 /* --------------- Hardware Access Routines -------------------------- */
 
-#ifdef LINUX_KERNEL
 int
-XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+XGIfb_mode_rate_to_dclock(struct vb_device_info *XGI_Pr, struct xgi_hw_device_info *HwDeviceExtension,
 			  unsigned char modeno, unsigned char rateindex)
 {
-    USHORT ModeNo = modeno;
-    USHORT ModeIdIndex = 0, ClockIndex = 0;
-    USHORT RefreshRateTableIndex = 0;
+    unsigned short ModeNo = modeno;
+    unsigned short ModeIdIndex = 0, ClockIndex = 0;
+    unsigned short RefreshRateTableIndex = 0;
 
-    /*ULONG  temp = 0;*/
+    /*unsigned long  temp = 0;*/
     int    Clock;
     XGI_Pr->ROMAddr  = HwDeviceExtension->pjVirtualRomBase;
     InitTo330Pointer( HwDeviceExtension->jChipType, XGI_Pr ) ;
@@ -201,16 +197,16 @@ XGIfb_mode_rate_to_dclock(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceEx
 }
 
 int
-XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExtension,
+XGIfb_mode_rate_to_ddata(struct vb_device_info *XGI_Pr, struct xgi_hw_device_info *HwDeviceExtension,
 			 unsigned char modeno, unsigned char rateindex,
 			 u32 *left_margin, u32 *right_margin,
 			 u32 *upper_margin, u32 *lower_margin,
 			 u32 *hsync_len, u32 *vsync_len,
 			 u32 *sync, u32 *vmode)
 {
-    USHORT ModeNo = modeno;
-    USHORT ModeIdIndex = 0, index = 0;
-    USHORT RefreshRateTableIndex = 0;
+    unsigned short ModeNo = modeno;
+    unsigned short ModeIdIndex = 0, index = 0;
+    unsigned short RefreshRateTableIndex = 0;
 
     unsigned short VRE, VBE, VRS, VBS, VDE, VT;
     unsigned short HRE, HBE, HRS, HBS, HDE, HT;
@@ -375,26 +371,13 @@ XGIfb_mode_rate_to_ddata(VB_DEVICE_INFO *XGI_Pr, PXGI_HW_DEVICE_INFO HwDeviceExt
       }
     }
 
-#if 0  /* That's bullshit, only the resolution needs to be shifted */
-    if((*vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
-       *upper_margin <<= 1;
-       *lower_margin <<= 1;
-       *vsync_len <<= 1;
-    } else if((*vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE) {
-       *upper_margin >>= 1;
-       *lower_margin >>= 1;
-       *vsync_len >>= 1;
-    }
-#endif
-
     return 1;
 }
 
-#endif
 
 
 
-void XGIRegInit(VB_DEVICE_INFO *XGI_Pr, ULONG BaseAddr)
+void XGIRegInit(struct vb_device_info *XGI_Pr, unsigned long BaseAddr)
 {
    XGI_Pr->RelIO = BaseAddr;
    XGI_Pr->P3c4 = BaseAddr + 0x14;
@@ -432,8 +415,8 @@ u32 XGIfb_get_reg3(u16 port)
 
 /* ------------ Interface for init & mode switching code ------------- */
 
-BOOLEAN
-XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+unsigned char
+XGIfb_query_VGA_config_space(struct xgi_hw_device_info *pXGIhw_ext,
 	unsigned long offset, unsigned long set, unsigned long *value)
 {
 	static struct pci_dev *pdev = NULL;
@@ -445,10 +428,10 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 		DPRINTK("XGIfb: Set offset 0x%lx to 0x%lx\n", offset, *value);
 
 	if (!init) {
-		init = TRUE;
+		init = 1;
 		pdev = pci_get_device(PCI_VENDOR_ID_XG, xgi_video_info.chip_id, pdev);
 		if (pdev) {
-			valid_pdev = TRUE;
+			valid_pdev = 1;
 			pci_dev_put(pdev);
 		}
 	}
@@ -456,7 +439,7 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 	if (!valid_pdev) {
 		printk(KERN_DEBUG "XGIfb: Can't find XGI %d VGA device.\n",
 				xgi_video_info.chip_id);
-		return FALSE;
+		return 0;
 	}
 
 	if (set == 0)
@@ -464,10 +447,10 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 	else
 		pci_write_config_dword(pdev, offset, (u32)(*value));
 
-	return TRUE;
+	return 1;
 }
 
-/*BOOLEAN XGIfb_query_north_bridge_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
+/*unsigned char XGIfb_query_north_bridge_space(struct xgi_hw_device_info *pXGIhw_ext,
 	unsigned long offset, unsigned long set, unsigned long *value)
 {
 	static struct pci_dev *pdev = NULL;
@@ -475,7 +458,7 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 	u16 nbridge_id = 0;
 
 	if (!init) {
-		init = TRUE;
+		init = 1;
 		switch (xgi_video_info.chip) {
 		case XGI_540:
 			nbridge_id = PCI_DEVICE_ID_XG_540;
@@ -502,13 +485,13 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 
 		pdev = pci_find_device(PCI_VENDOR_ID_SI, nbridge_id, pdev);
 		if (pdev)
-			valid_pdev = TRUE;
+			valid_pdev = 1;
 	}
 
 	if (!valid_pdev) {
 		printk(KERN_DEBUG "XGIfb: Can't find XGI %d North Bridge device.\n",
 				nbridge_id);
-		return FALSE;
+		return 0;
 	}
 
 	if (set == 0)
@@ -516,7 +499,7 @@ XGIfb_query_VGA_config_space(PXGI_HW_DEVICE_INFO pXGIhw_ext,
 	else
 		pci_write_config_dword(pdev, offset, (u32)(*value));
 
-	return TRUE;
+	return 1;
 }
 */
 /* ------------------ Internal helper routines ----------------- */
@@ -627,7 +610,8 @@ int XGIfb_GetXG21LVDSData(void)
                 i += 25;
                 j--;
                 k++;
-        } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+	} while ((j > 0) &&
+		 (k < (sizeof(XGI21_LCDCapList)/sizeof(struct XGI21_LVDSCapStruct))));
         return 1;
     }
     return 0;
@@ -954,46 +938,52 @@ static void XGIfb_search_tvstd(const char *name)
 	}
 }
 
-static BOOLEAN XGIfb_bridgeisslave(void)
+static unsigned char XGIfb_bridgeisslave(void)
 {
    unsigned char usScratchP1_00;
 
-   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+   if (xgi_video_info.hasVB == HASVB_NONE)
+	   return 0;
 
    inXGIIDXREG(XGIPART1,0x00,usScratchP1_00);
-   if( (usScratchP1_00 & 0x50) == 0x10)  {
-	   return TRUE;
-   } else {
-           return FALSE;
-   }
+   if ((usScratchP1_00 & 0x50) == 0x10)
+	   return 1;
+   else
+	   return 0;
 }
 
-static BOOLEAN XGIfbcheckvretracecrt1(void)
+static unsigned char XGIfbcheckvretracecrt1(void)
 {
    unsigned char temp;
 
    inXGIIDXREG(XGICR,0x17,temp);
-   if(!(temp & 0x80)) return FALSE;
+   if (!(temp & 0x80))
+	   return 0;
 
 
    inXGIIDXREG(XGISR,0x1f,temp);
-   if(temp & 0xc0) return FALSE;
+   if (temp & 0xc0)
+	   return 0;
 
-
-   if(inXGIREG(XGIINPSTAT) & 0x08) return TRUE;
-   else 			   return FALSE;
+   if (inXGIREG(XGIINPSTAT) & 0x08)
+	   return 1;
+   else
+	   return 0;
 }
 
-static BOOLEAN XGIfbcheckvretracecrt2(void)
+static unsigned char XGIfbcheckvretracecrt2(void)
 {
    unsigned char temp;
-   if(xgi_video_info.hasVB == HASVB_NONE) return FALSE;
+   if (xgi_video_info.hasVB == HASVB_NONE)
+	   return 0;
    inXGIIDXREG(XGIPART1, 0x30, temp);
-   if(temp & 0x02) return FALSE;
-   else 	   return TRUE;
+   if (temp & 0x02)
+	   return 0;
+   else
+	   return 1;
 }
 
-static BOOLEAN XGIfb_CheckVBRetrace(void)
+static unsigned char XGIfb_CheckVBRetrace(void)
 {
    if(xgi_video_info.disp_state & DISPTYPE_DISP2) {
       if(XGIfb_bridgeisslave()) {
@@ -1350,11 +1340,7 @@ static int XGIfb_set_par(struct fb_info *info)
 //	printk("XGIfb: inside set_par\n");
         if((err = XGIfb_do_set_var(&info->var, 1, info)))
 		return err;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
-	XGIfb_get_fix(&info->fix, info->currcon, info);
-#else
 	XGIfb_get_fix(&info->fix, -1, info);
-#endif
 //	printk("XGIfb:end of set_par\n");
 	return 0;
 }
@@ -1540,58 +1526,7 @@ static int XGIfb_pan_display( struct fb_var_screeninfo *var,
 }
 #endif
 
-#if 0
-static int XGIfb_mmap(struct fb_info *info, struct file *file,
-		      struct vm_area_struct *vma)
-{
-	unsigned long start;
-	unsigned long off;
-	u32 len, mmio_off;
-
-	DEBUGPRN("inside mmap");
-	if(vma->vm_pgoff > (~0UL >> PAGE_SHIFT))  return -EINVAL;
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	start = (unsigned long) xgi_video_info.video_base;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.video_size);
-	start &= PAGE_MASK;
-#if 0
-	if (off >= len) {
-		off -= len;
-#endif
-	/* By Jake Page: Treat mmap request with offset beyond heapstart
-	 *               as request for mapping the mmio area
-	 */
-	#if 1
-	mmio_off = PAGE_ALIGN((start & ~PAGE_MASK) + xgi_video_info.heapstart);
-	if(off >= mmio_off) {
-		off -= mmio_off;
-		if(info->var.accel_flags) return -EINVAL;
-
-		start = (unsigned long) xgi_video_info.mmio_base;
-		len = PAGE_ALIGN((start & ~PAGE_MASK) + XGIfb_mmio_size);
-	}
-	start &= PAGE_MASK;
-	#endif
-	if((vma->vm_end - vma->vm_start + off) > len)	return -EINVAL;
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	vma->vm_flags |= VM_IO;   /* by Jake Page; is that really needed? */
-
-#if defined(__i386__) || defined(__x86_64__)
-	if (boot_cpu_data.x86 > 3)
-		pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
-#endif
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start,
-				vma->vm_page_prot))
-		return -EAGAIN;
 
-        DEBUGPRN("end of mmap");
-	return 0;
-}
-#endif
 static int XGIfb_blank(int blank, struct fb_info *info)
 {
 	u8 reg;
@@ -1610,15 +1545,8 @@ static int XGIfb_blank(int blank, struct fb_info *info)
 }
 
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)
 static int XGIfb_ioctl(struct fb_info *info, unsigned int cmd,
 			    unsigned long arg)
-#else
-static int XGIfb_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg,
-		       struct fb_info *info)
-#endif
-
 {
 	DEBUGPRN("inside ioctl");
 	switch (cmd) {
@@ -1687,7 +1615,7 @@ static int XGIfb_ioctl(struct inode *inode, struct file *file,
 		break;
 	   case XGIFB_GET_INFO:  /* TW: New for communication with X driver */
 	        {
-			XGIfb_info *x = (XGIfb_info *)arg;
+			struct XGIfb_info *x = (struct XGIfb_info *)arg;
 
 			//x->XGIfb_id = XGIFB_ID;
 			x->XGIfb_version = VER_MAJOR;
@@ -1786,9 +1714,6 @@ static struct fb_ops XGIfb_ops = {
 	.fb_fillrect  = fbcon_XGI_fillrect,
 	.fb_copyarea  = fbcon_XGI_copyarea,
 	.fb_imageblit = cfb_imageblit,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
-	.fb_cursor    = soft_cursor,
-#endif
 	.fb_sync      = fbcon_XGI_sync,
 	.fb_ioctl     =	XGIfb_ioctl,
 //	.fb_mmap      =	XGIfb_mmap,
@@ -2008,9 +1933,9 @@ static int XGIfb_has_VB(void)
 		break;
 	   default:
 		xgi_video_info.hasVB = HASVB_NONE;
-		return FALSE;
+		return 0;
 	}
-	return TRUE;
+	return 1;
 }
 
 
@@ -2664,13 +2589,7 @@ static void XGIfb_pre_setmode(void)
 static void XGIfb_post_setmode(void)
 {
 	u8 reg;
-	BOOLEAN doit = TRUE;
-#if 0	/* TW: Wrong: Is not in MMIO space, but in RAM */
-	/* Backup mode number to MMIO space */
-	if(xgi_video_info.mmio_vbase) {
-	  *(volatile u8 *)(((u8*)xgi_video_info.mmio_vbase) + 0x449) = (unsigned char)XGIfb_mode_no;
-	}
-#endif
+	unsigned char doit = 1;
 /*	outXGIIDXREG(XGISR,IND_XGI_PASSWORD,XGI_PASSWORD);
 	outXGIIDXREG(XGICR,0x13,0x00);
 	setXGIIDXREG(XGISR,0x0E,0xF0,0x01);
@@ -2678,11 +2597,11 @@ static void XGIfb_post_setmode(void)
 	if (xgi_video_info.video_bpp == 8) {
 		/* TW: We can't switch off CRT1 on LVDS/Chrontel in 8bpp Modes */
 		if ((xgi_video_info.hasVB == HASVB_LVDS) || (xgi_video_info.hasVB == HASVB_LVDS_CHRONTEL)) {
-			doit = FALSE;
+			doit = 0;
 		}
 		/* TW: We can't switch off CRT1 on 301B-DH in 8bpp Modes if using LCD */
 		if  (xgi_video_info.disp_state & DISPTYPE_LCD)  {
-	        	doit = FALSE;
+			doit = 0;
 	        }
 	}
 
@@ -2691,14 +2610,15 @@ static void XGIfb_post_setmode(void)
 		inXGIIDXREG(XGIPART1, 0x00, reg);
 
 
-		if((reg & 0x50) == 0x10) {
-			doit = FALSE;
-		}
+		if ((reg & 0x50) == 0x10)
+			doit = 0;
 
-	} else XGIfb_crt1off = 0;
+
+	} else
+		XGIfb_crt1off = 0;
 
 	inXGIIDXREG(XGICR, 0x17, reg);
-	if((XGIfb_crt1off) && (doit))
+	if ((XGIfb_crt1off) && (doit))
 		reg &= ~0x80;
 	else
 		reg |= 0x80;
@@ -2907,7 +2827,7 @@ XGIINITSTATIC int __init XGIfb_setup(char *options)
 
 static unsigned char VBIOS_BUF[65535];
 
-unsigned char* attempt_map_rom(struct pci_dev *dev,void *copy_address)
+unsigned char *attempt_map_rom(struct pci_dev *dev, void *copy_address)
 {
     u32 rom_size      = 0;
     u32 rom_address   = 0;
@@ -2962,15 +2882,9 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	XGIfb_registered = 0;
 
-	memset(&XGIhw_ext, 0, sizeof(HW_DEVICE_EXTENSION));
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
+	memset(&XGIhw_ext, 0, sizeof(struct xgi_hw_device_info));
 	  fb_info = framebuffer_alloc(sizeof(struct fb_info), &pdev->dev);
 	  if(!fb_info) return -ENOMEM;
-#else
-	  XGI_fb_info = kmalloc( sizeof(struct fb_info), GFP_KERNEL);
-	  if(!XGI_fb_info) return -ENOMEM;
-	  memset(XGI_fb_info, 0,  sizeof(struct fb_info));
-#endif
 
   	xgi_video_info.chip_id = pdev->device;
 	  pci_read_config_byte(pdev, PCI_REVISION_ID,&xgi_video_info.revision_id);
@@ -2988,14 +2902,15 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	  xgi_video_info.mmio_base = pci_resource_start(pdev, 1);
 	  XGIfb_mmio_size =  pci_resource_len(pdev, 1);
 	  xgi_video_info.vga_base = pci_resource_start(pdev, 2) + 0x30;
-	  XGIhw_ext.pjIOAddress = (PUCHAR)xgi_video_info.vga_base;
+	  XGIhw_ext.pjIOAddress = (unsigned char *)xgi_video_info.vga_base;
 	  //XGI_Pr.RelIO  = ioremap(pci_resource_start(pdev, 2), 128) + 0x30;
-	  printk("XGIfb: Relocate IO address: %lx [%08lx] \n", (unsigned long)pci_resource_start(pdev, 2), XGI_Pr.RelIO);
+	  printk("XGIfb: Relocate IO address: %lx [%08lx]\n",
+		 (unsigned long)pci_resource_start(pdev, 2), XGI_Pr.RelIO);
 
 	  if (pci_enable_device(pdev))
 	          return -EIO;
 
-    XGIRegInit(&XGI_Pr, (ULONG)XGIhw_ext.pjIOAddress);
+    XGIRegInit(&XGI_Pr, (unsigned long)XGIhw_ext.pjIOAddress);
 
     outXGIIDXREG(XGISR, IND_XGI_PASSWORD, XGI_PASSWORD);
     inXGIIDXREG(XGISR, IND_XGI_PASSWORD, reg1);
@@ -3052,7 +2967,7 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		   case XG20:
 		   case XG21:
                    case XG27:
-                   XGIhw_ext.bIntegratedMMEnabled = TRUE;
+			   XGIhw_ext.bIntegratedMMEnabled = 1;
 			break;
 
 		   default:
@@ -3080,7 +2995,7 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	  strcpy(XGIhw_ext.szVBIOSVer, "0.84");
 
 
-    XGIhw_ext.pSR = vmalloc(sizeof(XGI_DSReg) * SR_BUFFER_SIZE);
+    XGIhw_ext.pSR = vmalloc(sizeof(struct XGI_DSReg) * SR_BUFFER_SIZE);
 	  if (XGIhw_ext.pSR == NULL)
 	  {
 		    printk(KERN_ERR "XGIfb: Fatal error: Allocating SRReg space failed.\n");
@@ -3088,7 +3003,7 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	  }
 	  XGIhw_ext.pSR[0].jIdx = XGIhw_ext.pSR[0].jVal = 0xFF;
 
-	  XGIhw_ext.pCR = vmalloc(sizeof(XGI_DSReg) * CR_BUFFER_SIZE);
+	  XGIhw_ext.pCR = vmalloc(sizeof(struct XGI_DSReg) * CR_BUFFER_SIZE);
 	  if (XGIhw_ext.pCR == NULL)
 	  {
 	      vfree(XGIhw_ext.pSR);
@@ -3218,7 +3133,7 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		    xgi_video_info.disp_state = DISPTYPE_LCD;
         	    if (!XGIfb_GetXG21LVDSData()) {
 			    int m;
-			    for (m=0; m < sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct); m++) {
+			    for (m = 0; m < sizeof(XGI21_LCDCapList)/sizeof(struct XGI21_LVDSCapStruct); m++) {
 				    if ((XGI21_LCDCapList[m].LVDSHDE == XGIbios_mode[xgifb_mode_idx].xres) &&
 					(XGI21_LCDCapList[m].LVDSVDE == XGIbios_mode[xgifb_mode_idx].yres)) {
 						XGINew_SetReg1( XGI_Pr.P3d4 , 0x36, m) ;
@@ -3341,14 +3256,14 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	          inXGIIDXREG(XGICR,0x38,tmp);
 		      if((tmp & 0x03) == 0x03)
 		      {
-//		          XGI_Pr.XGI_UseLCDA = TRUE;
+/*		          XGI_Pr.XGI_UseLCDA = 1; */
 		      }else
 		      {
 		     //  Currently on LCDA? (Some newer BIOSes set D0 in CR35)
 		         inXGIIDXREG(XGICR,0x35,tmp);
 		         if(tmp & 0x01)
 		         {
-//		              XGI_Pr.XGI_UseLCDA = TRUE;
+/*		              XGI_Pr.XGI_UseLCDA = 1; */
 		           }else
 		           {
 		               inXGIIDXREG(XGICR,0x30,tmp);
@@ -3357,7 +3272,7 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		                   inXGIIDXREG(XGIPART1,0x13,tmp);
 			               if(tmp & 0x04)
 			               {
-//			                XGI_Pr.XGI_UseLCDA = TRUE;
+/*			                XGI_Pr.XGI_UseLCDA = 1; */
 			               }
 		               }
 		           }
@@ -3462,20 +3377,6 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	        }
 
-
-#if 0
-#ifdef XGIFB_PAN
-		if(XGIfb_ypan) {
-	    		default_var.yres_virtual =
-				xgi_video_info.heapstart / (default_var.xres * (default_var.bits_per_pixel >> 3));
-	    		if(default_var.yres_virtual <= default_var.yres) {
-	        		default_var.yres_virtual = default_var.yres;
-	    		}
-		}
-#endif
-#endif
-
-
 		xgi_video_info.accel = 0;
 		if(XGIfb_accel) {
 		   xgi_video_info.accel = -1;
@@ -3511,7 +3412,8 @@ int __devinit xgifb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		XGIfb_registered = 1;
 
-		printk(KERN_INFO "XGIfb: Installed XGIFB_GET_INFO ioctl (%x)\n", XGIFB_GET_INFO);
+		printk(KERN_INFO "XGIfb: Installed XGIFB_GET_INFO ioctl (%lx)\n",
+		       XGIFB_GET_INFO);
 
 /*		printk(KERN_INFO "XGIfb: 2D acceleration is %s, scrolling mode %s\n",
 		     XGIfb_accel ? "enabled" : "disabled",
@@ -3538,11 +3440,7 @@ static void __devexit xgifb_remove(struct pci_dev *pdev)
 	/* Unregister the framebuffer */
 //	if(xgi_video_info.registered) {
 		unregister_framebuffer(fb_info);
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,3))
 		framebuffer_release(fb_info);
-#else
-		kfree(fb_info);
-#endif
 //	}
 
 	pci_set_drvdata(pdev, NULL);
@@ -3558,7 +3456,6 @@ static struct pci_driver xgifb_driver = {
 
 XGIINITSTATIC int __init xgifb_init(void)
 {
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
 #ifndef MODULE
 	char *option = NULL;
 
@@ -3566,15 +3463,13 @@ XGIINITSTATIC int __init xgifb_init(void)
 		return -ENODEV;
 	XGIfb_setup(option);
 #endif
-#endif
 	return(pci_register_driver(&xgifb_driver));
 }
 
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8)
+
 #ifndef MODULE
 module_init(xgifb_init);
 #endif
-#endif
 
 /*****************************************************/
 /*                      MODULE                       */
diff --git a/drivers/staging/xgifb/XGIfb.h b/drivers/staging/xgifb/XGIfb.h
index 41bf163d4e6..ef86a64d699 100644
--- a/drivers/staging/xgifb/XGIfb.h
+++ b/drivers/staging/xgifb/XGIfb.h
@@ -27,7 +27,7 @@
 #define XGIFB_ID          0x53495346    /* Identify myself with 'XGIF' */
 #endif
 
-typedef enum _XGI_CHIP_TYPE {
+enum XGI_CHIP_TYPE {
     XGI_VGALegacy = 0,
     XGI_300,
     XGI_630,
@@ -53,9 +53,9 @@ typedef enum _XGI_CHIP_TYPE {
     XG21,
     XG27,
     MAX_XGI_CHIP
-} XGI_CHIP_TYPE;
+};
 
-typedef enum _TVTYPE {
+enum xgi_tvtype {
 	TVMODE_NTSC = 0,
 	TVMODE_PAL,
 	TVMODE_HIVISION,
@@ -63,13 +63,11 @@ typedef enum _TVTYPE {
     	TVTYPE_PALN,	// vicki@030226
     	TVTYPE_NTSCJ,	// vicki@030226
 	TVMODE_TOTAL
-} XGI_TV_TYPE;
-
+};
 
-typedef struct _XGIFB_INFO XGIfb_info;
-struct _XGIFB_INFO {
 
-unsigned long XGIfb_id;
+struct XGIfb_info {
+	unsigned long XGIfb_id;
  	int    chip_id;			/* PCI ID of detected chip */
 	int    memory;			/* video memory in KB which XGIfb manages */
 	int    heapstart;               /* heap start (= XGIfb "mem" argument) in KB */
@@ -97,7 +95,7 @@ unsigned long XGIfb_id;
 
 
 
-typedef enum _TVPLUGTYPE {	// vicki@030226
+enum xgi_tv_plug {	/* vicki@030226 */
 //	TVPLUG_Legacy = 0,
 //	TVPLUG_COMPOSITE,
 //	TVPLUG_SVIDEO,
@@ -113,7 +111,7 @@ typedef enum _TVPLUGTYPE {	// vicki@030226
     	TVPLUG_YPBPR_750P = 7,
     	TVPLUG_YPBPR_1080i = 8,
 	TVPLUG_TOTAL
-} XGI_TV_PLUG;
+};
 
 
 struct mode_info {
@@ -132,10 +130,10 @@ struct ap_data {
 	unsigned long iobase;
 	unsigned int  mem_size;
 	unsigned long disp_state;
-	XGI_CHIP_TYPE chip;
+	enum XGI_CHIP_TYPE chip;
 	unsigned char hasVB;
-	XGI_TV_TYPE TV_type;
-	XGI_TV_PLUG TV_plug;
+	enum xgi_tvtype TV_type;
+	enum xgi_tv_plug TV_plug;
 	unsigned long version;
 	char reserved[256];
 };
@@ -184,7 +182,7 @@ struct video_info{
         unsigned char TV_type;
         unsigned char TV_plug;
 
-        XGI_CHIP_TYPE chip;
+	enum XGI_CHIP_TYPE chip;
         unsigned char revision_id;
 
         unsigned short DstColor;
@@ -207,9 +205,4 @@ struct video_info{
 
 extern struct video_info xgi_video_info;
 
-#ifdef __KERNEL__
-//extern void xgi_malloc(struct xgi_memreq *req);
-extern void xgi_free(unsigned long base);
-extern void xgi_dispinfo(struct ap_data *rec);
-#endif
 #endif
diff --git a/drivers/staging/xgifb/osdef.h b/drivers/staging/xgifb/osdef.h
deleted file mode 100644
index 4bc7d3a7440..00000000000
--- a/drivers/staging/xgifb/osdef.h
+++ /dev/null
@@ -1,153 +0,0 @@
-#ifndef _OSDEF_H_
-#define _OSDEF_H_
-
-/* #define WINCE_HEADER*/
-/*#define WIN2000*/
-/* #define TC */
-#define LINUX_KERNEL
-/* #define LINUX_XF86 */
-
-/**********************************************************************/
-#ifdef LINUX_KERNEL
-//#include <linux/config.h>
-#endif
-
-
-/**********************************************************************/
-#ifdef TC
-#endif
-#ifdef WIN2000
-#endif
-#ifdef WINCE_HEADER
-#endif
-#ifdef LINUX_XF86
-#define LINUX
-#endif
-#ifdef LINUX_KERNEL
-#define LINUX
-#endif
-
-/**********************************************************************/
-#ifdef TC
-#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
-#endif
-#ifdef WIN2000
-#define XGI_SetMemory(MemoryAddress,MemorySize,value) MemFill((PVOID) MemoryAddress,(ULONG) MemorySize,(UCHAR) value);
-#endif
-#ifdef WINCE_HEADER
-#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize);
-#endif
-#ifdef LINUX_XF86
-#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-#endif
-#ifdef LINUX_KERNEL
-#define XGI_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-#endif
-/**********************************************************************/
-
-/**********************************************************************/
-
-#ifdef TC
-#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
-#endif
-#ifdef WIN2000
-#define XGI_MemoryCopy(Destination,Soruce,Length)  /*VideoPortMoveMemory((PUCHAR)Destination , Soruce,length);*/
-#endif
-#ifdef WINCE_HEADER
-#define XGI_MemoryCopy(Destination,Soruce,Length) memmove(Destination, Soruce, Length);
-#endif
-#ifdef LINUX_XF86
-#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
-#endif
-#ifdef LINUX_KERNEL
-#define XGI_MemoryCopy(Destination,Soruce,Length) memcpy(Destination,Soruce,Length)
-#endif
-
-/**********************************************************************/
-
-#ifdef OutPortByte
-#undef OutPortByte
-#endif /* OutPortByte */
-
-#ifdef OutPortWord
-#undef OutPortWord
-#endif /* OutPortWord */
-
-#ifdef OutPortLong
-#undef OutPortLong
-#endif /* OutPortLong */
-
-#ifdef InPortByte
-#undef InPortByte
-#endif /* InPortByte */
-
-#ifdef InPortWord
-#undef InPortWord
-#endif /* InPortWord */
-
-#ifdef InPortLong
-#undef InPortLong
-#endif /* InPortLong */
-
-/**********************************************************************/
-/*  TC                                                                */
-/**********************************************************************/
-
-#ifdef TC
-#define OutPortByte(p,v) outp((unsigned short)(p),(unsigned char)(v))
-#define OutPortWord(p,v) outp((unsigned short)(p),(unsigned short)(v))
-#define OutPortLong(p,v) outp((unsigned short)(p),(unsigned long)(v))
-#define InPortByte(p)    inp((unsigned short)(p))
-#define InPortWord(p)    inp((unsigned short)(p))
-#define InPortLong(p)    ((inp((unsigned short)(p+2))<<16) | inp((unsigned short)(p)))
-#endif
-
-/**********************************************************************/
-/*  LINUX XF86                                                        */
-/**********************************************************************/
-
-#ifdef LINUX_XF86
-#define OutPortByte(p,v) outb((CARD16)(p),(CARD8)(v))
-#define OutPortWord(p,v) outw((CARD16)(p),(CARD16)(v))
-#define OutPortLong(p,v) outl((CARD16)(p),(CARD32)(v))
-#define InPortByte(p)    inb((CARD16)(p))
-#define InPortWord(p)    inw((CARD16)(p))
-#define InPortLong(p)    inl((CARD16)(p))
-#endif
-
-#ifdef LINUX_KERNEL
-#define OutPortByte(p,v) outb((u8)(v),(p))
-#define OutPortWord(p,v) outw((u16)(v),(p))
-#define OutPortLong(p,v) outl((u32)(v),(p))
-#define InPortByte(p)    inb(p)
-#define InPortWord(p)    inw(p)
-#define InPortLong(p)    inl(p)
-#endif
-
-/**********************************************************************/
-/*  WIN 2000                                                          */
-/**********************************************************************/
-
-#ifdef WIN2000
-#define OutPortByte(p,v) VideoPortWritePortUchar ((PUCHAR) (p), (UCHAR) (v))
-#define OutPortWord(p,v) VideoPortWritePortUshort((PUSHORT) (p), (USHORT) (v))
-#define OutPortLong(p,v) VideoPortWritePortUlong ((PULONG) (p), (ULONG) (v))
-#define InPortByte(p)    VideoPortReadPortUchar  ((PUCHAR) (p))
-#define InPortWord(p)    VideoPortReadPortUshort ((PUSHORT) (p))
-#define InPortLong(p)    VideoPortReadPortUlong  ((PULONG) (p))
-#endif
-
-
-/**********************************************************************/
-/*  WIN CE                                                          */
-/**********************************************************************/
-
-#ifdef WINCE_HEADER
-#define OutPortByte(p,v) WRITE_PORT_UCHAR ((PUCHAR) (p), (UCHAR) (v))
-#define OutPortWord(p,v) WRITE_PORT_USHORT((PUSHORT) (p), (USHORT) (v))
-#define OutPortLong(p,v) WRITE_PORT_ULONG ((PULONG) (p), (ULONG) (v))
-#define InPortByte(p)    READ_PORT_UCHAR  ((PUCHAR) (p))
-#define InPortWord(p)    READ_PORT_USHORT ((PUSHORT) (p))
-#define InPortLong(p)    READ_PORT_ULONG  ((PULONG) (p))
-#endif
-#endif // _OSDEF_H_
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
index 17a7ada4926..4de182b23d4 100644
--- a/drivers/staging/xgifb/vb_def.h
+++ b/drivers/staging/xgifb/vb_def.h
@@ -6,7 +6,7 @@
 #define NewScratch
 #endif
 /* shampoo */
-#ifdef LINUX_KERNEL
+
 #define SEQ_ADDRESS_PORT	  0x0014
 #define SEQ_DATA_PORT		  0x0015
 #define MISC_OUTPUT_REG_READ_PORT 0x001C
@@ -17,7 +17,7 @@
 #define CRTC_ADDRESS_PORT_COLOR   0x0024
 #define VIDEO_SUBSYSTEM_ENABLE_PORT 0x0013
 #define PCI_COMMAND		0x04
-#endif
+
 /* ~shampoo */
 
 
diff --git a/drivers/staging/xgifb/vb_ext.c b/drivers/staging/xgifb/vb_ext.c
index 49b39ee93a8..1ecf9e3e85f 100644
--- a/drivers/staging/xgifb/vb_ext.c
+++ b/drivers/staging/xgifb/vb_ext.c
@@ -1,40 +1,7 @@
-#include "osdef.h"
-
-
-
-
-#ifdef WIN2000
-
-#include <dderror.h>
-#include <devioctl.h>
-#include <miniport.h>
-#include <ntddvdeo.h>
-#include <video.h>
-#include "xgiv.h"
-#include "dd_i2c.h"
-#include "tools.h"
-#endif /* WIN2000 */
-
-#ifdef LINUX_XF86
-#include "xf86.h"
-#include "xf86PciInfo.h"
-#include "xgi.h"
-#include "xgi_regs.h"
-#endif
-
-#ifdef LINUX_KERNEL
 #include <linux/version.h>
 #include <asm/io.h>
 #include <linux/types.h>
 #include "XGIfb.h"
-/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#include <video/XGIfb.h>
-#else
-#include <linux/XGIfb.h>
-#endif*/
-#endif
-
-
 
 #include "vb_def.h"
 #include "vgatypes.h"
@@ -42,43 +9,33 @@
 #include "vb_util.h"
 #include "vb_setmode.h"
 #include "vb_ext.h"
-extern   UCHAR XGI330_SoftSetting;
-extern   UCHAR XGI330_OutputSelect;
-extern   USHORT XGI330_RGBSenseData2;
-extern   USHORT XGI330_YCSenseData2;
-extern   USHORT XGI330_VideoSenseData2;
-#ifdef WIN2000
-extern   UCHAR SenseCHTV(PHW_DEVICE_EXTENSION pHWDE);       /* 2007/05/17 Billy */
-#endif
-void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
-BOOLEAN  XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo);
-USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGINew_GetLCDDDCInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
-void XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
-BOOLEAN  XGINew_BridgeIsEnable(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo );
-BOOLEAN  XGINew_Sense(USHORT tempbx,USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
+extern   unsigned char XGI330_SoftSetting;
+extern   unsigned char XGI330_OutputSelect;
+extern   unsigned short XGI330_RGBSenseData2;
+extern   unsigned short XGI330_YCSenseData2;
+extern   unsigned short XGI330_VideoSenseData2;
+void     XGI_GetSenseStatus(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+unsigned char  XGINew_GetPanelID(struct vb_device_info *pVBInfo);
+unsigned short XGINew_SenseLCD(struct xgi_hw_device_info *,
+			       struct vb_device_info *pVBInfo);
+unsigned char XGINew_GetLCDDDCInfo(struct xgi_hw_device_info *HwDeviceExtension,
+			     struct vb_device_info *pVBInfo);
+void XGISetDPMS(struct xgi_hw_device_info *pXGIHWDE,
+		unsigned long VESA_POWER_STATE);
+unsigned char XGINew_BridgeIsEnable(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+unsigned char XGINew_Sense(unsigned short tempbx, unsigned short tempcx,
+		     struct vb_device_info *pVBInfo);
+unsigned char XGINew_SenseHiTV(struct xgi_hw_device_info *HwDeviceExtension,
+			       struct vb_device_info *pVBInfo);
 
 /**************************************************************
 	Dynamic Sense
 *************************************************************/
 
 void XGI_WaitDisplay(void);
-BOOLEAN XGI_Is301C(PVB_DEVICE_INFO);
-BOOLEAN XGI_Is301LV(PVB_DEVICE_INFO);
-
-#ifdef WIN2000
-UCHAR XGI_SenseLCD(PHW_DEVICE_EXTENSION, PVB_DEVICE_INFO);
-UCHAR XGI_GetLCDDDCInfo(PHW_DEVICE_EXTENSION,PVB_DEVICE_INFO);
+unsigned char XGI_Is301C(struct vb_device_info *);
+unsigned char XGI_Is301LV(struct vb_device_info *);
 
-extern BOOL bGetDdcInfo(
-PHW_DEVICE_EXTENSION  pHWDE,
-ULONG                 ulWhichOne,
-PUCHAR                pjQueryBuffer,
-ULONG                 ulBufferSize
-   );
-
-#endif
 
 
 /* --------------------------------------------------------------------- */
@@ -87,9 +44,9 @@ ULONG                 ulBufferSize
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_Is301B( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGINew_Is301B(struct vb_device_info *pVBInfo)
 {
-    USHORT flag ;
+    unsigned short flag ;
 
     flag = XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) ;
 
@@ -105,7 +62,7 @@ BOOLEAN XGINew_Is301B( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_Is301C( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_Is301C(struct vb_device_info *pVBInfo)
 {
     if ( ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) & 0xF0 ) == 0xC0 )
         return( 1 ) ;
@@ -126,7 +83,7 @@ BOOLEAN XGI_Is301C( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_Is301LV( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_Is301LV(struct vb_device_info *pVBInfo)
 {
     if ( XGINew_GetReg1( pVBInfo->Part4Port , 0x01 ) >= 0xD0 )
     {
@@ -145,9 +102,11 @@ BOOLEAN XGI_Is301LV( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_Sense(  USHORT tempbx , USHORT tempcx, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGINew_Sense(unsigned short tempbx,
+		     unsigned short tempcx,
+		     struct vb_device_info *pVBInfo)
 {
-    USHORT temp , i , tempch ;
+    unsigned short temp, i, tempch;
 
     temp = tempbx & 0xFF ;
     XGINew_SetReg1( pVBInfo->Part4Port , 0x11 , temp ) ;
@@ -169,284 +128,6 @@ BOOLEAN XGINew_Sense(  USHORT tempbx , USHORT tempcx, PVB_DEVICE_INFO pVBInfo )
         return( 0 ) ;
 }
 
-#ifdef WIN2000
-/* --------------------------------------------------------------------- */
-/* Function : XGI_SenseLCD */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-UCHAR XGI_SenseLCD( PHW_DEVICE_EXTENSION pHWDE, PVB_DEVICE_INFO pVBInfo)
-{
-    USHORT tempax , tempbx , tempcx ;
-    UCHAR SoftSetting = XGI330_SoftSetting ;
-
-    if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV ) )
-        return( 1 ) ;
-
-
-    if ( SoftSetting & HotPlugFunction )	/* Hot Plug Detection */
-    {
-        XGINew_SetRegAND( pVBInfo->Part4Port , 0x0F , 0x3F ) ;
-        tempbx = 0 ;
-        tempcx = 0x9010 ;
-        if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
-            return( 1 ) ;
-
-        return( 0 ) ;
-    }
-    else	/* Get LCD Info from EDID */
-        return(XGI_GetLCDDDCInfo(pHWDE, pVBInfo));
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Function : XGI_GetLCDDDCInfo */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-UCHAR XGI_GetLCDDDCInfo( PHW_DEVICE_EXTENSION pHWDE , PVB_DEVICE_INFO pVBInfo)
-{
-    UCHAR tempah , tempbl , tempbh ;
-    USHORT tempbx , temp ;
-    UCHAR pjEDIDBuf[ 256 ] ;
-    ULONG ulBufferSize = 256 ;
-    UCHAR bMASK_OUTPUTSTATE_CRT2LCD = 2 ; /* 0423 shampoo */
-
-    bGetDdcInfo( pHWDE , MASK_OUTPUTSTATE_CRT2LCD , pjEDIDBuf , ulBufferSize ) ;
-    if ( ( *( ( PULONG )pjEDIDBuf ) == 0xFFFFFF00 ) && ( *( ( PULONG )( pjEDIDBuf + 4 ) ) == 0x00FFFFFF ) )
-    {
-        tempah = Panel1024x768 ;
-        tempbl=( *( pjEDIDBuf + 0x3A ) ) & 0xf0 ;
-
-        if ( tempbl != 0x40 )
-        {
-            tempah = Panel1600x1200 ;
-            if ( tempbl != 0x60 )
-            {
-                tempah = Panel1280x1024 ;
-                tempbh = ( *( pjEDIDBuf + 0x3B ) ) ;
-                if ( tempbh != 0x00 )
-                {
-                    tempah = Panel1280x960 ;
-                    if ( tempbh != 0x0C0 )
-                    {
-                        tempbx = ( ( *( pjEDIDBuf + 0x24 ) ) << 8 ) | ( *( pjEDIDBuf + 0x23 ) ) ;
-                        tempah = Panel1280x1024 ;
-                        if ( !( tempbx & 0x0100 ) )
-                        {
-                            tempah = Panel1024x768 ;
-                            if ( !( tempbx & 0x0E00 ) )
-                            {
-                                tempah = Panel1280x1024 ;
-                            }
-                        }
-                    }
-
-                    if ( tempbx & 0x00FF )
-                    {
-                        temp = ScalingLCD ;
-                        XGINew_SetRegOR( pVBInfo->P3d4 , 0x37 , temp ) ;
-                    }
-                }
-            }
-        }
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
-        tempah = ( ( *( pjEDIDBuf + 0x47 ) ) & 0x06 ) ;		/* Polarity */
-        tempah = ( tempah ^ 0x06 ) << 4 ;
-        tempah |= LCDSync ;
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x37 , ( ~LCDSyncBit ) , tempah ) ;
-        tempbh= XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
-        tempbh &= 0x07 ;
-        if ( tempbh == Panel1280x960 )
-            XGINew_SetRegAND( pVBInfo->P3d4 , 0x37 , 0x0E ) ;
-    }
-    else if ( *pjEDIDBuf == 0x20 )
-    {
-        tempah = Panel1024x768 ;
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x36 , ( ~0x07 ) , tempah ) ;
-    }
-    else
-    {
-        return( 0 ) ;
-    }
-
-    return( 1 ) ;
-}
-
-
-/* --------------------------------------------------------------------- */
-/* Function : XGI_DySense */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus)
-{
-    UCHAR pre_CRD,pre_SR1E , pre_Part2_0 , pre_Part4_D ;
-    USHORT tempax , tempbx , tempcx , pushax , temp ;
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
-    UCHAR OutputSelect = XGI330_OutputSelect ;
-    PXGI_HW_DEVICE_INFO HwDeviceExtension= pHWDE->pXGIHWDE ;
-    UCHAR   bConnectStatus = 0 ;
-    pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
-    pVBInfo->ROMAddr  = pHWDE->pjVirtualRomBase ;
-
-    pVBInfo->P3c2 = pVBInfo->BaseAddr + 0x12 ;
-    pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
-    pVBInfo->P3d4 = pVBInfo->BaseAddr + 0x24 ;
-    pVBInfo->Part2Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_10 ;
-    pVBInfo->Part4Port = pVBInfo->BaseAddr + XGI_CRT2_PORT_14 ;
-    pushax = XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;	/* 0512 Fix Dysense hanged */
-    temp = ( pushax & 0x00FF ) | 0x80 ;
-    XGINew_SetRegOR( pVBInfo->P3d4 , 0x17 , temp ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
-    /* beginning of dynamic sense CRT1 */
-
-    pVBInfo->IF_DEF_CH7007 = 0;
-    if (pHWDE->bCH7007)
-    {
-    	InitTo330Pointer( pHWDE->pXGIHWDE->jChipType, pVBInfo ) ;
-        HwDeviceExtension->pDevice = (PVOID)pHWDE;
-        pVBInfo->IF_DEF_CH7007 = 1;
-        /* [Billy] 2007/05/14 For CH7007 */
-        if ( pVBInfo->IF_DEF_CH7007 == 1 )
-        {
-           bConnectStatus = SenseCHTV(HwDeviceExtension->pDevice) ; /* 07/05/28 */
-           XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~0x03 , (UCHAR)bConnectStatus ) ;
-        }
-    }
-    if(( pHWDE->jChipID >= XG40 ) || ( pHWDE->jChipID >= XG20 ))
-    {
-
-        if ( pHWDE->jChipID >= XG40 )
-    	    XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;	/* write sense pattern 30->4a */
-    	else
-            XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x5F ) ;	/* write sense pattern */
-
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x53 , 0xFF , 0x02 ) ;	/* enable sense DAC */
-        XGI_WaitDisply(pVBInfo) ;
-
-        if(XGINew_GetReg2( pVBInfo->P3c2 ) & 0x10 )
-            bConnectStatus |= Monitor1Sense ;
-
-        XGINew_SetRegAND( pVBInfo->P3d4 , 0x53 , 0xFD ) ;	/* disable sense DAC */
-        XGINew_SetRegAND( pVBInfo->P3d4 , 0x57 , 0x00 ) ;	/* clear sense pattern */
-
-
-        /* ---------- End of dynamic sense CRT1 ----------- */
-
-        /* ---------- beginning of dynamic sense VB ------------ */
-        pre_SR1E = XGINew_GetReg1( pVBInfo->P3c4 , 0x1E ) ;
-        XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;	/* Enable CRT2,work-a-round for 301B/301LV/302LV */
-        pre_Part2_0 = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
-        pre_Part4_D = XGINew_GetReg1( pVBInfo->Part4Port , 0x0D ) ;
-
-        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
-            XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~0x07 , 0x01 ) ;	/* Set Part4 0x0D D[2:0] to 001b */
-
-        /* tempax = 0 ; */
-        if ( !XGI_Is301LV( pVBInfo ) )
-        {
-           tempbx = XGI330_RGBSenseData2 ;
-            tempcx = 0x0E08 ;
-            if(XGINew_Sense( tempbx , tempcx, pVBInfo ) )
-            {
-                bConnectStatus |= Monitor2Sense ;
-                if ( OutputSelect & SetSCARTOutput )
-                {
-                    bConnectStatus ^= ( Monitor2Sense | SCARTSense ) ;
-                }
-            }
-        }
-        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
-            XGINew_SetRegOR( pVBInfo->Part4Port , 0x0D , 0x04 ) ;	/* Set Part4 0x0D D[2]=1 for dynamic sense */
-
-        if ( ( XGINew_Is301B( pVBInfo ) ) )
-            XGINew_SetRegOR( pVBInfo->Part2Port , 0x00 , 0x0C ) ;    /* ????????? */
-
-	if ( XGINew_SenseHiTV( HwDeviceExtension , pVBInfo) )		/* add by kuku for Dysense HiTV //start */
-	{
-	    bConnectStatus|= YPbPrSense ;
-	}
-	else
-	{
-        tempbx = XGI330_YCSenseData2 ;	/* Y/C Sense Data Ptr */
-        tempcx = 0x0604 ;
-        if ( XGINew_Sense( tempbx , tempcx , pVBInfo) )
-            bConnectStatus |= SVIDEOSense ;
-
-        if ( OutputSelect & BoardTVType )
-        {
-            tempbx = XGI330_VideoSenseData2 ;
-            tempcx = 0x0804 ;
-            if ( XGINew_Sense(tempbx , tempcx, pVBInfo) )
-                bConnectStatus|= AVIDEOSense ;
-        }
-        else
-        {
-            if ( !( bConnectStatus & SVIDEOSense ) )
-            {
-                tempbx = XGI330_VideoSenseData2 ;
-                tempcx = 0x0804 ;
-                if ( XGINew_Sense( tempbx , tempcx, pVBInfo ) )
-                    bConnectStatus |= AVIDEOSense ;
-            }
-        }
-    	} /* end */
-        /* DySenseVBCnt */
-
-        tempbx = 0 ;
-        tempcx = 0 ;
-        XGINew_Sense(tempbx , tempcx, pVBInfo ) ;
-
-        if ( !( bConnectStatus & Monitor2Sense ) )
-        {
-            if ( XGI_SenseLCD( pHWDE , pVBInfo ) )
-                bConnectStatus |= LCDSense ;
-        }
-
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x32 , ~( AVIDEOSense | SVIDEOSense | LCDSense | Monitor2Sense | Monitor1Sense ) , bConnectStatus ) ;
-
-        XGINew_SetReg1( pVBInfo->Part4Port , 0x0D , pre_Part4_D ) ;
-        XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , pre_Part2_0 ) ;
-        XGINew_SetReg1( pVBInfo->P3c4 , 0x1E , pre_SR1E ) ;
-
-        if ( XGI_Is301C( pVBInfo ) )	/* 301C only */
-        {
-            tempax = XGINew_GetReg1( pVBInfo->Part2Port , 0x00 ) ;
-            if ( tempax & 0x20 )
-            {
-                /* Reset VBPro */
-                for( tempcx = 2 ; tempcx > 0 ; tempcx-- )
-                {
-                    tempax ^= 0x20 ;
-                    XGINew_SetReg1( pVBInfo->Part2Port , 0x00 , tempax ) ;
-                }
-            }
-        }
-        /* End of dynamic sense VB */
-    }
-    else
-    {
-        XGI_SenseCRT1(pVBInfo) ;
-        XGI_GetSenseStatus( HwDeviceExtension, pVBInfo ) ;	/* sense CRT2 */
-        bConnectStatus = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
-    }
-    temp = pushax & 0x00FF ;		/* 0512 Fix Dysense hanged */
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , temp ) ;
-    if ( bConnectStatus )
-    {
-        *ujConnectStatus = bConnectStatus ;
-        return( 1 ) ;
-    }
-    else
-        return( 0 ) ;
-}
-
-#endif /* WIN2000 */
 
 /* --------------------------------------------------------------------- */
 /* Function : XGISetDPMS */
@@ -454,13 +135,14 @@ BOOLEAN XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
+void XGISetDPMS(struct xgi_hw_device_info *pXGIHWDE,
+		unsigned long VESA_POWER_STATE)
 {
-    USHORT ModeNo, ModeIdIndex ;
-    UCHAR  temp ;
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
-    pVBInfo->BaseAddr = (ULONG)pXGIHWDE->pjIOAddress ;
+    unsigned short ModeNo, ModeIdIndex;
+    unsigned char temp;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
+    pVBInfo->BaseAddr = (unsigned long)pXGIHWDE->pjIOAddress ;
     pVBInfo->ROMAddr  = pXGIHWDE->pjVirtualRomBase ;
 
 
@@ -527,18 +209,18 @@ VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
     }
 
     if ( VESA_POWER_STATE == 0x00000400 )
-      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) & 0xFE ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part4Port, 0x31, (unsigned char)(XGINew_GetReg1(pVBInfo->Part4Port, 0x31) & 0xFE));
     else
-      XGINew_SetReg1( pVBInfo->Part4Port , 0x31 , ( UCHAR )( XGINew_GetReg1( pVBInfo->Part4Port , 0x31 ) | 0x01 ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part4Port, 0x31, (unsigned char)(XGINew_GetReg1(pVBInfo->Part4Port, 0x31) | 0x01));
 
-    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1f ) ;
+    temp = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x1f);
     temp &= 0x3f ;
     switch ( VESA_POWER_STATE )
     {
         case 0x00000000: /* on */
             if ( ( pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
             {
-                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x00 ) ) ;
+		XGINew_SetReg1(pVBInfo->P3c4, 0x1f, (unsigned char)(temp | 0x00));
                 XGI_EnableBridge( pXGIHWDE, pVBInfo ) ;
             }
             else
@@ -596,7 +278,7 @@ VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
             }
 
-            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x40 ) ) ;
+	    XGINew_SetReg1(pVBInfo->P3c4, 0x1f, (unsigned char)(temp | 0x40));
             break ;
         case 0x00000200: /* suspend */
             if ( pXGIHWDE->jChipType == XG21 )
@@ -609,12 +291,12 @@ VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
                 XGI_DisplayOff( pXGIHWDE, pVBInfo );
                 XGI_XG27BLSignalVDD( 0x20 , 0x00, pVBInfo ) ; /* LVDS signal off */
             }
-            XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0x80 ) ) ;
+	    XGINew_SetReg1(pVBInfo->P3c4, 0x1f, (unsigned char)(temp | 0x80));
             break ;
         case 0x00000400: /* off */
             if ( (pXGIHWDE->ujVBChipID == VB_CHIP_301 ) || ( pXGIHWDE->ujVBChipID == VB_CHIP_302 ) )
             {
-                XGINew_SetReg1( pVBInfo->P3c4 , 0x1f , ( UCHAR )( temp | 0xc0 ) ) ;
+		XGINew_SetReg1(pVBInfo->P3c4, 0x1f, (unsigned char)(temp | 0xc0));
                 XGI_DisableBridge( pXGIHWDE, pVBInfo ) ;
             }
             else
@@ -677,12 +359,12 @@ VOID XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGI_GetSenseStatus(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax = 0 , tempbx , tempcx , temp ,
+    unsigned short tempax = 0 , tempbx , tempcx , temp ,
            P2reg0 = 0 , SenseModeNo = 0 , OutputSelect = *pVBInfo->pOutputSelect ,
            ModeIdIndex , i ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
 
     if ( pVBInfo->IF_DEF_LVDS == 1 )
     {
@@ -876,10 +558,11 @@ void XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGINew_SenseLCD( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+unsigned short XGINew_SenseLCD(struct xgi_hw_device_info *HwDeviceExtension,
+			       struct vb_device_info *pVBInfo)
 {
-    /* USHORT SoftSetting ; */
-    USHORT temp ;
+    /* unsigned short SoftSetting ; */
+    unsigned short temp ;
 
     if ( ( HwDeviceExtension->jChipType >= XG20 ) || ( HwDeviceExtension->jChipType >= XG40 ) )
         temp = 0 ;
@@ -899,9 +582,9 @@ USHORT XGINew_SenseLCD( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO p
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+unsigned char XGINew_GetLCDDDCInfo(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT temp ;
+    unsigned short temp ;
 
     /* add lcd sense */
     if ( HwDeviceExtension->ulCRT2LCDType == LCD_UNKNOWN )
@@ -910,7 +593,7 @@ BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_I
     }
     else
     {
-        temp = ( USHORT )HwDeviceExtension->ulCRT2LCDType ;
+	    temp = (unsigned short)HwDeviceExtension->ulCRT2LCDType ;
         switch( HwDeviceExtension->ulCRT2LCDType )
         {
             case LCD_INVALID:
@@ -952,26 +635,27 @@ BOOLEAN XGINew_GetLCDDDCInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_I
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo )
+unsigned char XGINew_GetPanelID(struct vb_device_info *pVBInfo)
 {
-    USHORT PanelTypeTable[ 16 ] = { SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType00 ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType01 ,
-                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType02 ,
-                                    SyncNN | PanelRGB18Bit | Panel640x480  | _PanelType03 ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType04 ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType05 ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType06 ,
-                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType07 ,
-                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType08 ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType09 ,
-                                    SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType0A ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0B ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0C ,
-                                    SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType0D ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0E ,
-                                    SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0F } ;
-    USHORT tempax , tempbx , temp ;
-    /* USHORT return_flag ; */
+	unsigned short PanelTypeTable[16] = {
+		SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType00,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType01,
+		SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType02,
+		SyncNN | PanelRGB18Bit | Panel640x480  | _PanelType03,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType04,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType05,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType06,
+		SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType07,
+		SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType08,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType09,
+		SyncNN | PanelRGB18Bit | Panel800x600  | _PanelType0A,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0B,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0C,
+		SyncNN | PanelRGB24Bit | Panel1024x768 | _PanelType0D,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0E,
+		SyncNN | PanelRGB18Bit | Panel1024x768 | _PanelType0F };
+	unsigned short tempax , tempbx, temp;
+    /* unsigned short return_flag ; */
 
     tempax = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ;
     tempbx = tempax & 0x1E ;
@@ -1024,9 +708,9 @@ BOOLEAN XGINew_GetPanelID(PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_BridgeIsEnable( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+unsigned char XGINew_BridgeIsEnable(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT flag ;
+    unsigned short flag ;
 
     if ( XGI_BridgeIsOn( pVBInfo ) == 0 )
     {
@@ -1051,9 +735,9 @@ BOOLEAN XGINew_BridgeIsEnable( PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE
 /* Output : */
 /* Description : */
 /* ------------------------------------------------------ */
-BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+unsigned char XGINew_SenseHiTV(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx , tempcx , temp , i , tempch;
+    unsigned short tempbx , tempcx , temp , i , tempch;
 
     tempbx = *pVBInfo->pYCSenseData2 ;
 
@@ -1132,14 +816,14 @@ BOOLEAN XGINew_SenseHiTV( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INF
 ;		     DX: PAnel V. resolution
 ;-----------------------------------------------------------------------------
 */
-void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+void XGI_XG21Fun14Sub70(struct vb_device_info *pVBInfo, PX86_REGS pBiosArguments)
 {
 
-    USHORT ModeIdIndex;
-    USHORT ModeNo;
+    unsigned short ModeIdIndex;
+    unsigned short ModeNo;
 
-    USHORT EModeCount;
-    USHORT lvdstableindex;
+    unsigned short EModeCount;
+    unsigned short lvdstableindex;
 
     lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
     pBiosArguments->h.bl = 0x81;
@@ -1153,7 +837,7 @@ void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
         ModeNo = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID;
         if ( pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeID == 0xFF )
         {
-            pBiosArguments->h.bh = (UCHAR) EModeCount;
+	    pBiosArguments->h.bh = (unsigned char) EModeCount;
             return;
         }
         if ( !XGI_XG21CheckLVDSMode( ModeNo , ModeIdIndex, pVBInfo) )
@@ -1175,13 +859,13 @@ void XGI_XG21Fun14Sub70( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
 ;
 ;-----------------------------------------------------------------------------
 */
-void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+void XGI_XG21Fun14Sub71(struct vb_device_info *pVBInfo, PX86_REGS pBiosArguments)
 {
 
-    USHORT EModeCount;
-    USHORT ModeIdIndex,resindex;
-    USHORT ModeNo;
-    USHORT EModeIndex = pBiosArguments->h.bh;
+    unsigned short EModeCount;
+    unsigned short ModeIdIndex, resindex;
+    unsigned short ModeNo;
+    unsigned short EModeIndex = pBiosArguments->h.bh;
 
     EModeCount = 0;
     for( ModeIdIndex = 0 ; ;  ModeIdIndex ++ )
@@ -1199,7 +883,7 @@ void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
         if (EModeCount == EModeIndex)
         {
             resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
-            pBiosArguments->h.bl = (UCHAR) ModeNo;
+	    pBiosArguments->h.bl = (unsigned char) ModeNo;
             pBiosArguments->x.cx = pVBInfo->ModeResInfo[ resindex ].HTotal ;			  /* xres->ax */
             pBiosArguments->x.dx = pVBInfo->ModeResInfo[ resindex ].VTotal ;			  /* yres->bx */
             pBiosArguments->x.ax = 0x0014;
@@ -1221,10 +905,10 @@ void XGI_XG21Fun14Sub71( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
 ;
 ;-----------------------------------------------------------------------------
 */
-void XGI_XG21Fun14Sub72( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+void XGI_XG21Fun14Sub72(struct vb_device_info *pVBInfo, PX86_REGS pBiosArguments)
 {
-    USHORT ModeIdIndex,resindex;
-    USHORT ModeNo;
+    unsigned short ModeIdIndex, resindex;
+    unsigned short ModeNo;
 
 
     ModeNo = pBiosArguments->h.bl ;
@@ -1280,11 +964,11 @@ void XGI_XG21Fun14Sub72( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
 ;                       BX[6]: *Value1 D[6] Panel H. Polarity
 ;-----------------------------------------------------------------------------
 */
-void XGI_XG21Fun14Sub73( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
+void XGI_XG21Fun14Sub73(struct vb_device_info *pVBInfo, PX86_REGS pBiosArguments)
 {
-    UCHAR Select;
+    unsigned char Select;
 
-    USHORT lvdstableindex;
+    unsigned short lvdstableindex;
 
     lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
     Select = pBiosArguments->h.bl;
@@ -1314,10 +998,10 @@ void XGI_XG21Fun14Sub73( PVB_DEVICE_INFO pVBInfo , PX86_REGS pBiosArguments )
 }
 
 
-void XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments)
+void XGI_XG21Fun14(struct xgi_hw_device_info *pXGIHWDE, PX86_REGS pBiosArguments)
 {
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
 
     pVBInfo->IF_DEF_LVDS = 0 ;
     pVBInfo->IF_DEF_CH7005 = 0 ;
diff --git a/drivers/staging/xgifb/vb_ext.h b/drivers/staging/xgifb/vb_ext.h
index 9a72f5ecb71..5cc4d12c225 100644
--- a/drivers/staging/xgifb/vb_ext.h
+++ b/drivers/staging/xgifb/vb_ext.h
@@ -2,15 +2,17 @@
 #define  _VBEXT_
 
 struct DWORDREGS {
-    ULONG    Eax, Ebx, Ecx, Edx, Esi, Edi, Ebp;
+    unsigned long    Eax, Ebx, Ecx, Edx, Esi, Edi, Ebp;
 };
 
 struct WORDREGS {
-    USHORT    ax, hi_ax, bx, hi_bx, cx, hi_cx, dx, hi_dx, si, hi_si, di ,hi_di, bp, hi_bp;
+    unsigned short ax, hi_ax, bx, hi_bx, cx, hi_cx, dx, hi_dx, si,
+	    hi_si, di, hi_di, bp, hi_bp;
 };
 
 struct BYTEREGS {
-    UCHAR   al, ah, hi_al, hi_ah, bl, bh, hi_bl, hi_bh, cl, ch, hi_cl, hi_ch, dl, dh, hi_dl, hi_dh;
+     unsigned char al, ah, hi_al, hi_ah, bl, bh, hi_bl, hi_bh, cl, ch,
+	     hi_cl, hi_ch, dl, dh, hi_dl, hi_dh;
 };
 
 typedef union   _X86_REGS    {
@@ -19,14 +21,14 @@ typedef union   _X86_REGS    {
     struct  BYTEREGS h;
 } X86_REGS, *PX86_REGS;
 
-extern   void     XGI_XG21Fun14( PXGI_HW_DEVICE_INFO pXGIHWDE, PX86_REGS pBiosArguments);
-extern   void     XGISetDPMS( PXGI_HW_DEVICE_INFO pXGIHWDE , ULONG VESA_POWER_STATE ) ;
-extern   void     XGI_GetSenseStatus( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo );
-extern   void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
-extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
-extern   USHORT   XGINew_SenseLCD(PXGI_HW_DEVICE_INFO,PVB_DEVICE_INFO pVBInfo);
-#ifdef WIN2000
-extern   BOOLEAN  XGI_DySense( PHW_DEVICE_EXTENSION pHWDE , PUCHAR ujConnectStatus );
-#endif /* WIN2000 */
+extern   void     XGI_XG21Fun14(struct xgi_hw_device_info *pXGIHWDE, PX86_REGS pBiosArguments);
+extern void XGISetDPMS(struct xgi_hw_device_info *pXGIHWDE,
+		       unsigned long VESA_POWER_STATE);
+extern   void     XGI_GetSenseStatus(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+extern   void     XGINew_SetModeScratch(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo) ;
+extern void ReadVBIOSTablData(unsigned char ChipType,
+			      struct vb_device_info *pVBInfo);
+extern unsigned short XGINew_SenseLCD(struct xgi_hw_device_info *,
+				      struct vb_device_info *pVBInfo);
 
 #endif
diff --git a/drivers/staging/xgifb/vb_init.c b/drivers/staging/xgifb/vb_init.c
index b85ca9ba807..e02722d05f6 100644
--- a/drivers/staging/xgifb/vb_init.c
+++ b/drivers/staging/xgifb/vb_init.c
@@ -1,29 +1,9 @@
-#include "osdef.h"
 #include "vgatypes.h"
 
-
-#ifdef LINUX_KERNEL
 #include <linux/version.h>
 #include <linux/types.h>
 #include <linux/delay.h> /* udelay */
 #include "XGIfb.h"
-/*#if LINUX_VERSxION_CODE >= KERNEL_VERSION(2,5,0)
-#include <video/XGIfb.h>
-#else
-#include <linux/XGIfb.h>
-#endif */
-#endif
-
-#ifdef WIN2000
-#include <dderror.h>
-#include <devioctl.h>
-#include <miniport.h>
-#include <ntddvdeo.h>
-#include <video.h>
-#include "xgiv.h"
-#include "dd_i2c.h"
-#include "tools.h"
-#endif
 
 #include "vb_def.h"
 #include "vb_struct.h"
@@ -32,123 +12,105 @@
 #include "vb_init.h"
 #include "vb_ext.h"
 
-#ifdef LINUX_XF86
-#include "xf86.h"
-#include "xf86PciInfo.h"
-#include "xgi.h"
-#include "xgi_regs.h"
-#endif
 
-#ifdef LINUX_KERNEL
 #include <asm/io.h>
-#include <linux/types.h>
-#endif
 
 
 
 
-UCHAR    XGINew_ChannelAB,XGINew_DataBusWidth;
-
-USHORT XGINew_DRAMType[17][5]={{0x0C,0x0A,0x02,0x40,0x39},{0x0D,0x0A,0x01,0x40,0x48},
-                     {0x0C,0x09,0x02,0x20,0x35},{0x0D,0x09,0x01,0x20,0x44},
-                     {0x0C,0x08,0x02,0x10,0x31},{0x0D,0x08,0x01,0x10,0x40},
-                     {0x0C,0x0A,0x01,0x20,0x34},{0x0C,0x09,0x01,0x08,0x32},
-                     {0x0B,0x08,0x02,0x08,0x21},{0x0C,0x08,0x01,0x08,0x30},
-                     {0x0A,0x08,0x02,0x04,0x11},{0x0B,0x0A,0x01,0x10,0x28},
-                     {0x09,0x08,0x02,0x02,0x01},{0x0B,0x09,0x01,0x08,0x24},
-                     {0x0B,0x08,0x01,0x04,0x20},{0x0A,0x08,0x01,0x02,0x10},
-                     {0x09,0x08,0x01,0x01,0x00}};
-
-USHORT XGINew_SDRDRAM_TYPE[13][5]=
-{
-{ 2,12, 9,64,0x35},
-{ 1,13, 9,64,0x44},
-{ 2,12, 8,32,0x31},
-{ 2,11, 9,32,0x25},
-{ 1,12, 9,32,0x34},
-{ 1,13, 8,32,0x40},
-{ 2,11, 8,16,0x21},
-{ 1,12, 8,16,0x30},
-{ 1,11, 9,16,0x24},
-{ 1,11, 8, 8,0x20},
-{ 2, 9, 8, 4,0x01},
-{ 1,10, 8, 4,0x10},
-{ 1, 9, 8, 2,0x00}
-};
-
-USHORT XGINew_DDRDRAM_TYPE[4][5]=
-{
-{ 2,12, 9,64,0x35},
-{ 2,12, 8,32,0x31},
-{ 2,11, 8,16,0x21},
-{ 2, 9, 8, 4,0x01}
-};
-USHORT XGINew_DDRDRAM_TYPE340[4][5]=
-{
-{ 2,13, 9,64,0x45},
-{ 2,12, 9,32,0x35},
-{ 2,12, 8,16,0x31},
-{ 2,11, 8, 8,0x21}
-};
-USHORT XGINew_DDRDRAM_TYPE20[12][5]=
-{
-{ 2,14,11,128,0x5D},
-{ 2,14,10,64,0x59},
-{ 2,13,11,64,0x4D},
-{ 2,14, 9,32,0x55},
-{ 2,13,10,32,0x49},
-{ 2,12,11,32,0x3D},
-{ 2,14, 8,16,0x51},
-{ 2,13, 9,16,0x45},
-{ 2,12,10,16,0x39},
-{ 2,13, 8, 8,0x41},
-{ 2,12, 9, 8,0x35},
-{ 2,12, 8, 4,0x31}
-};
-
-void     XGINew_SetDRAMSize_340(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
-void     XGINew_SetDRAMSize_310(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
-void     XGINew_SetMemoryClock(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-void     XGINew_SetDRAMModeRegister(PVB_DEVICE_INFO );
-void     XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension );
-void 	 XGINew_SetDRAMDefaultRegister340(PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG, PVB_DEVICE_INFO );
-UCHAR    XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension) ;
-
-int      XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
-void     XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO ,PVB_DEVICE_INFO) ;
-void     XGINew_CheckBusWidth_310( PVB_DEVICE_INFO) ;
-int      XGINew_SDRSizing(PVB_DEVICE_INFO);
-int      XGINew_DDRSizing( PVB_DEVICE_INFO );
-void     XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO);
+unsigned char XGINew_ChannelAB, XGINew_DataBusWidth;
+
+unsigned short XGINew_DRAMType[17][5] = {
+	{0x0C, 0x0A, 0x02, 0x40, 0x39}, {0x0D, 0x0A, 0x01, 0x40, 0x48},
+	{0x0C, 0x09, 0x02, 0x20, 0x35}, {0x0D, 0x09, 0x01, 0x20, 0x44},
+	{0x0C, 0x08, 0x02, 0x10, 0x31}, {0x0D, 0x08, 0x01, 0x10, 0x40},
+	{0x0C, 0x0A, 0x01, 0x20, 0x34}, {0x0C, 0x09, 0x01, 0x08, 0x32},
+	{0x0B, 0x08, 0x02, 0x08, 0x21}, {0x0C, 0x08, 0x01, 0x08, 0x30},
+	{0x0A, 0x08, 0x02, 0x04, 0x11}, {0x0B, 0x0A, 0x01, 0x10, 0x28},
+	{0x09, 0x08, 0x02, 0x02, 0x01}, {0x0B, 0x09, 0x01, 0x08, 0x24},
+	{0x0B, 0x08, 0x01, 0x04, 0x20}, {0x0A, 0x08, 0x01, 0x02, 0x10},
+	{0x09, 0x08, 0x01, 0x01, 0x00} };
+
+unsigned short XGINew_SDRDRAM_TYPE[13][5] = {
+	{ 2, 12, 9, 64, 0x35},
+	{ 1, 13, 9, 64, 0x44},
+	{ 2, 12, 8, 32, 0x31},
+	{ 2, 11, 9, 32, 0x25},
+	{ 1, 12, 9, 32, 0x34},
+	{ 1, 13, 8, 32, 0x40},
+	{ 2, 11, 8, 16, 0x21},
+	{ 1, 12, 8, 16, 0x30},
+	{ 1, 11, 9, 16, 0x24},
+	{ 1, 11, 8,  8, 0x20},
+	{ 2,  9, 8,  4, 0x01},
+	{ 1, 10, 8,  4, 0x10},
+	{ 1,  9, 8,  2, 0x00} };
+
+unsigned short XGINew_DDRDRAM_TYPE[4][5] = {
+	{ 2, 12, 9, 64, 0x35},
+	{ 2, 12, 8, 32, 0x31},
+	{ 2, 11, 8, 16, 0x21},
+	{ 2,  9, 8,  4, 0x01} };
+
+unsigned short XGINew_DDRDRAM_TYPE340[4][5] = {
+	{ 2, 13, 9, 64, 0x45},
+	{ 2, 12, 9, 32, 0x35},
+	{ 2, 12, 8, 16, 0x31},
+	{ 2, 11, 8,  8, 0x21} };
+
+unsigned short XGINew_DDRDRAM_TYPE20[12][5] = {
+	{ 2, 14, 11, 128, 0x5D},
+	{ 2, 14, 10, 64, 0x59},
+	{ 2, 13, 11, 64, 0x4D},
+	{ 2, 14,  9, 32, 0x55},
+	{ 2, 13, 10, 32, 0x49},
+	{ 2, 12, 11, 32, 0x3D},
+	{ 2, 14,  8, 16, 0x51},
+	{ 2, 13,  9, 16, 0x45},
+	{ 2, 12, 10, 16, 0x39},
+	{ 2, 13,  8,  8, 0x41},
+	{ 2, 12,  9,  8, 0x35},
+	{ 2, 12,  8,  4, 0x31} };
+
+void     XGINew_SetDRAMSize_340(struct xgi_hw_device_info *, struct vb_device_info *);
+void     XGINew_SetDRAMSize_310(struct xgi_hw_device_info *, struct vb_device_info *);
+void     XGINew_SetMemoryClock(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+void     XGINew_SetDRAMModeRegister(struct vb_device_info *);
+void     XGINew_SetDRAMModeRegister340(struct xgi_hw_device_info *HwDeviceExtension);
+void XGINew_SetDRAMDefaultRegister340(struct xgi_hw_device_info *HwDeviceExtension,
+				      unsigned long, struct vb_device_info *);
+unsigned char XGINew_GetXG20DRAMType(struct xgi_hw_device_info *HwDeviceExtension,
+				     struct vb_device_info *pVBInfo);
+unsigned char XGIInitNew(struct xgi_hw_device_info *HwDeviceExtension);
+
+int      XGINew_DDRSizing340(struct xgi_hw_device_info *, struct vb_device_info *);
+void     XGINew_DisableRefresh(struct xgi_hw_device_info *, struct vb_device_info *) ;
+void     XGINew_CheckBusWidth_310(struct vb_device_info *) ;
+int      XGINew_SDRSizing(struct vb_device_info *);
+int      XGINew_DDRSizing(struct vb_device_info *);
+void     XGINew_EnableRefresh(struct xgi_hw_device_info *, struct vb_device_info *);
 int      XGINew_RAMType;                  /*int      ModeIDOffset,StandTable,CRT1Table,ScreenOffset,REFIndex;*/
-ULONG	 UNIROM;			  /* UNIROM */
-BOOLEAN  ChkLFB( PVB_DEVICE_INFO );
-void     XGINew_Delay15us(ULONG);
-void     SetPowerConsume (PXGI_HW_DEVICE_INFO HwDeviceExtension,ULONG XGI_P3d4Port);
-void 	 ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
-void 	 XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo);
-void     XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension );
-void     XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension );
-void 	 XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
-void     XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo ) ;
-void     XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
-UCHAR    GetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
-void     XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo) ;
-UCHAR    GetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
-
-#ifdef WIN2000
-/* [Billy] 2007/05/20 For CH7007 */
-extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
-extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
-#endif
-
-#ifdef LINUX_KERNEL
-void DelayUS(ULONG MicroSeconds)
+unsigned long	 UNIROM;			  /* UNIROM */
+unsigned char  ChkLFB(struct vb_device_info *);
+void     XGINew_Delay15us(unsigned long);
+void     SetPowerConsume(struct xgi_hw_device_info *HwDeviceExtension,
+			 unsigned long XGI_P3d4Port);
+void     ReadVBIOSTablData(unsigned char ChipType, struct vb_device_info *pVBInfo);
+void     XGINew_DDR1x_MRS_XG20(unsigned long P3c4, struct vb_device_info *pVBInfo);
+void     XGINew_SetDRAMModeRegister_XG20(struct xgi_hw_device_info *HwDeviceExtension);
+void     XGINew_SetDRAMModeRegister_XG27(struct xgi_hw_device_info *HwDeviceExtension);
+void     XGINew_ChkSenseStatus(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo) ;
+void     XGINew_SetModeScratch(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo) ;
+void     XGINew_GetXG21Sense(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo) ;
+unsigned char    GetXG21FPBits(struct vb_device_info *pVBInfo);
+void     XGINew_GetXG27Sense(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo) ;
+unsigned char    GetXG27FPBits(struct vb_device_info *pVBInfo);
+
+void DelayUS(unsigned long MicroSeconds)
 {
 	udelay(MicroSeconds);
 }
-#endif
+
 
 /* --------------------------------------------------------------------- */
 /* Function : XGIInitNew */
@@ -156,46 +118,44 @@ void DelayUS(ULONG MicroSeconds)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+unsigned char XGIInitNew(struct xgi_hw_device_info *HwDeviceExtension)
 {
 
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
-    UCHAR   i , temp = 0 , temp1 ;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
+    unsigned char   i, temp = 0, temp1 ;
      //       VBIOSVersion[ 5 ] ;
-    PUCHAR  volatile pVideoMemory;
+    volatile unsigned char *pVideoMemory;
 
-    /* ULONG j, k ; */
+    /* unsigned long j, k ; */
 
-    PXGI_DSReg pSR ;
+    struct XGI_DSReg *pSR ;
 
-    ULONG Temp ;
+    unsigned long Temp ;
 
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
 
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
 
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
 
-    pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr;
+    pVideoMemory = (unsigned char *)pVBInfo->ROMAddr;
 
 
 //    Newdebugcode( 0x99 ) ;
 
 
    /* if ( pVBInfo->ROMAddr == 0 ) */
-   /* return( FALSE ) ; */
+   /* return( 0 ) ; */
 
-    if ( pVBInfo->FBAddr == 0 )
-{
+    if (pVBInfo->FBAddr == 0) {
        printk("\n pVBInfo->FBAddr == 0 ");
-       return( FALSE ) ;
-}
+       return 0;
+    }
 printk("1");
-    if ( pVBInfo->BaseAddr == 0 )
-{
-       printk("\npVBInfo->BaseAddr == 0 ");
-        return( FALSE ) ;
+if (pVBInfo->BaseAddr == 0) {
+	printk("\npVBInfo->BaseAddr == 0 ");
+	return 0;
 }
 printk("2");
 
@@ -205,12 +165,9 @@ printk("2");
 printk("3");
 
 if ( !HwDeviceExtension->bIntegratedMMEnabled )
-{
-        return( FALSE ) ;	/* alan */
-}
-printk("4");
+	return 0;	/* alan */
 
-//    XGI_MemoryCopy( VBIOSVersion , HwDeviceExtension->szVBIOSVer , 4 ) ;
+printk("4");
 
  //   VBIOSVersion[ 4 ] = 0x0 ;
 
@@ -407,8 +364,8 @@ printk("15");
     XGI_UnLockCRT2( HwDeviceExtension, pVBInfo) ;
     XGINew_SetRegANDOR( pVBInfo->Part0Port , 0x3F , 0xEF , 0x00 ) ;	/* alan, disable VideoCapture */
     XGINew_SetReg1( pVBInfo->Part1Port , 0x00 , 0x00 ) ;
-    temp1 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x7B ) ;		/* chk if BCLK>=100MHz */
-    temp = ( UCHAR )( ( temp1 >> 4 ) & 0x0F ) ;
+    temp1 = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x7B);	/* chk if BCLK>=100MHz */
+    temp = (unsigned char)((temp1 >> 4) & 0x0F);
 
 
         XGINew_SetReg1( pVBInfo->Part1Port , 0x02 , ( *pVBInfo->pCRT2Data_1_2 ) ) ;
@@ -460,15 +417,14 @@ printk("18");
         XGINew_SetReg1( pVBInfo->P3d4 , 0x83 , 0x00 ) ;
 printk("181");
 
-    if ( HwDeviceExtension->bSkipSense == FALSE )
-    {
-printk("182");
+if (HwDeviceExtension->bSkipSense == 0) {
+	printk("182");
 
         XGI_SenseCRT1(pVBInfo) ;
 
-printk("183");
+	printk("183");
         /* XGINew_DetectMonitor( HwDeviceExtension ) ; */
-pVBInfo->IF_DEF_CH7007 = 0;
+	pVBInfo->IF_DEF_CH7007 = 0;
         if ( ( HwDeviceExtension->jChipType == XG21 ) && (pVBInfo->IF_DEF_CH7007) )
         {
 printk("184");
@@ -504,8 +460,7 @@ printk("19");
 
         XGINew_SetDRAMDefaultRegister340( HwDeviceExtension ,  pVBInfo->P3d4,  pVBInfo ) ;
 
-        if ( HwDeviceExtension->bSkipDramSizing == TRUE )
-        {
+	if (HwDeviceExtension->bSkipDramSizing == 1) {
             pSR = HwDeviceExtension->pSR ;
             if ( pSR!=NULL )
             {
@@ -519,15 +474,6 @@ printk("19");
         }   	/* SkipDramSizing */
         else
         {
-#if 0
-           if ( HwDeviceExtension->jChipType == XG20 )
-            {
-            	XGINew_SetReg1( pVBInfo->P3c4 , 0x13 , pVBInfo->SR15[0][XGINew_RAMType] ) ;
-                XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , pVBInfo->SR15[1][XGINew_RAMType] ) ;
-                XGINew_SetReg1( pVBInfo->P3c4 , 0x20 , 0x20 ) ;
-            }
-            else
-#endif
 {
 printk("20");
 
@@ -544,7 +490,7 @@ printk("22");
     /* SetDefExt2Regs begin */
 /*
     AGP = 1 ;
-    temp =( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x3A ) ;
+    temp =(unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x3A) ;
     temp &= 0x30 ;
     if ( temp == 0x30 )
         AGP = 0 ;
@@ -563,7 +509,7 @@ printk("22");
 //    Temp = ( InPortLong( 0xcfc ) & 0xFFFF ) ;
 //    if ( Temp == 0x1039 )
 //    {
-        XGINew_SetReg1( pVBInfo->P3c4 , 0x22 , ( UCHAR )( ( *pVBInfo->pSR22 ) & 0xFE ) ) ;
+	XGINew_SetReg1(pVBInfo->P3c4, 0x22, (unsigned char)((*pVBInfo->pSR22) & 0xFE));
 //    }
 //    else
 //    {
@@ -585,7 +531,7 @@ XGINew_SetReg1( pVBInfo->P3d4 , 0x8c , 0x87);
 XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , 0x31);
 printk("25");
 
-    return( TRUE ) ;
+return 1;
 } /* end of init */
 
 
@@ -600,9 +546,10 @@ printk("25");
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+unsigned char XGINew_GetXG20DRAMType(struct xgi_hw_device_info *HwDeviceExtension,
+				     struct vb_device_info *pVBInfo)
 {
-    UCHAR data, temp ;
+    unsigned char data, temp;
 
     if ( HwDeviceExtension->jChipType < XG20 )
     {
@@ -670,9 +617,9 @@ UCHAR XGINew_GetXG20DRAMType( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGINew_Get310DRAMType(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGINew_Get310DRAMType(struct vb_device_info *pVBInfo)
 {
-    UCHAR data ;
+    unsigned char data ;
 
   /* index = XGINew_GetReg1( pVBInfo->P3c4 , 0x1A ) ; */
   /* index &= 07 ; */
@@ -694,7 +641,7 @@ UCHAR XGINew_Get310DRAMType(PVB_DEVICE_INFO pVBInfo)
 /* Description : */
 /* --------------------------------------------------------------------- */
 /*
-void XGINew_Delay15us(ULONG ulMicrsoSec)
+void XGINew_Delay15us(unsigned long ulMicrsoSec)
 {
 }
 */
@@ -706,9 +653,9 @@ void XGINew_Delay15us(ULONG ulMicrsoSec)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SDR_MRS(  PVB_DEVICE_INFO pVBInfo )
+void XGINew_SDR_MRS(struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data ;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
     data &= 0x3F ;          /* SR16 D7=0,D6=0 */
@@ -726,7 +673,7 @@ void XGINew_SDR_MRS(  PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR1x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR1x_MRS_340(unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
     XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
     XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
@@ -764,7 +711,7 @@ void XGINew_DDR1x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR2x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR2x_MRS_340(unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
     XGINew_SetReg1( P3c4 , 0x18 , 0x00 ) ;
     XGINew_SetReg1( P3c4 , 0x19 , 0x20 ) ;
@@ -793,9 +740,10 @@ void XGINew_DDR2x_MRS_340( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDRII_Bootup_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDRII_Bootup_XG27(struct xgi_hw_device_info *HwDeviceExtension,
+			      unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = P3c4 + 0x10 ;
+    unsigned long P3d4 = P3c4 + 0x10 ;
     XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
     XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
 
@@ -871,9 +819,10 @@ void XGINew_DDRII_Bootup_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR2_MRS_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR2_MRS_XG20(struct xgi_hw_device_info *HwDeviceExtension,
+			  unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = P3c4 + 0x10 ;
+    unsigned long P3d4 = P3c4 + 0x10 ;
 
     XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
     XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
@@ -923,9 +872,10 @@ void XGINew_DDR2_MRS_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR2_MRS_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR2_MRS_XG27(struct xgi_hw_device_info *HwDeviceExtension,
+			  unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = P3c4 + 0x10 ;
+    unsigned long P3d4 = P3c4 + 0x10 ;
 
      XGINew_RAMType = ( int )XGINew_GetXG20DRAMType( HwDeviceExtension , pVBInfo ) ;
      XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
@@ -1001,9 +951,10 @@ void XGINew_DDR2_MRS_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG P3c4 ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR1x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR1x_DefaultRegister(struct xgi_hw_device_info *HwDeviceExtension,
+				  unsigned long Port, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = Port ,
+    unsigned long P3d4 = Port ,
            P3c4 = Port - 0x10 ;
 
     if ( HwDeviceExtension->jChipType >= XG20 )
@@ -1061,9 +1012,10 @@ void XGINew_DDR1x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULON
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR2x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port ,PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR2x_DefaultRegister(struct xgi_hw_device_info *HwDeviceExtension,
+				  unsigned long Port, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = Port ,
+    unsigned long P3d4 = Port ,
            P3c4 = Port - 0x10 ;
 
     XGINew_SetMemoryClock( HwDeviceExtension , pVBInfo ) ;
@@ -1112,9 +1064,10 @@ void XGINew_DDR2x_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULON
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR2_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG Port , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR2_DefaultRegister(struct xgi_hw_device_info *HwDeviceExtension,
+				 unsigned long Port, struct vb_device_info *pVBInfo)
 {
-    ULONG P3d4 = Port ,
+    unsigned long P3d4 = Port ,
            P3c4 = Port - 0x10 ;
 
     /* keep following setting sequence, each setting in the same reg insert idle */
@@ -1150,12 +1103,13 @@ void XGINew_DDR2_DefaultRegister( PXGI_HW_DEVICE_INFO HwDeviceExtension, ULONG P
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMDefaultRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension ,  ULONG Port , PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetDRAMDefaultRegister340(struct xgi_hw_device_info *HwDeviceExtension,
+				      unsigned long Port, struct vb_device_info *pVBInfo)
 {
-    UCHAR temp , temp1 , temp2 , temp3 ,
+    unsigned char temp, temp1, temp2, temp3 ,
           i , j , k ;
 
-    ULONG P3d4 = Port ,
+    unsigned long P3d4 = Port ,
            P3c4 = Port - 0x10 ;
 
     XGINew_SetReg1( P3d4 , 0x6D , pVBInfo->CR40[ 8 ][ XGINew_RAMType ] ) ;
@@ -1293,11 +1247,11 @@ void XGINew_SetDRAMDefaultRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR_MRS(PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR_MRS(struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data ;
 
-    PUCHAR volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+    volatile unsigned char *pVideoMemory = (unsigned char *)pVBInfo->ROMAddr;
 
     /* SR16 <- 1F,DF,2F,AF */
     /* yriver modified SR16 <- 0F,DF,0F,AF */
@@ -1361,11 +1315,11 @@ void XGINew_DDR_MRS(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_VerifyMclk( PXGI_HW_DEVICE_INFO  HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_VerifyMclk(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    PUCHAR pVideoMemory = pVBInfo->FBAddr ;
-    UCHAR i , j ;
-    USHORT Temp , SR21 ;
+    unsigned char *pVideoMemory = pVBInfo->FBAddr ;
+    unsigned char i, j ;
+    unsigned short Temp , SR21 ;
 
     pVideoMemory[ 0 ] = 0xaa ; 		/* alan */
     pVideoMemory[ 16 ] = 0x55 ; 	/* note: PCI read cache is off */
@@ -1407,9 +1361,9 @@ void XGINew_VerifyMclk( PXGI_HW_DEVICE_INFO  HwDeviceExtension , PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetDRAMSize_340(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT  data ;
+    unsigned short  data ;
 
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
@@ -1418,7 +1372,7 @@ void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+    XGINew_SetReg1(pVBInfo->P3c4, 0x21, (unsigned short)(data & 0xDF));	/* disable read cache */
     XGI_DisplayOff( HwDeviceExtension, pVBInfo );
 
     /*data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;*/
@@ -1426,8 +1380,7 @@ void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
     /*XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , data ) ;*/			/* Turn OFF Display */
     XGINew_DDRSizing340( HwDeviceExtension, pVBInfo ) ;
     data=XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
-
+    XGINew_SetReg1(pVBInfo->P3c4, 0x21, (unsigned short)(data | 0x20)); /* enable read cache */
 }
 
 
@@ -1437,9 +1390,9 @@ void XGINew_SetDRAMSize_340( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetDRAMSize_310(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data ;
     pVBInfo->ROMAddr  = HwDeviceExtension->pjVirtualRomBase ,
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
 #ifdef XGI301
@@ -1455,7 +1408,7 @@ void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
     XGISetModeNew( HwDeviceExtension , 0x2e ) ;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x21 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data & 0xDF ) ) ;	/* disable read cache */
+    XGINew_SetReg1(pVBInfo->P3c4, 0x21, (unsigned short)(data & 0xDF));	/* disable read cache */
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1 ) ;
     data |= 0x20 ;
@@ -1464,7 +1417,7 @@ void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x16 ) ;
 
 
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , ( USHORT )( data | 0x0F ) ) ;		/* assume lowest speed DRAM */
+    XGINew_SetReg1(pVBInfo->P3c4, 0x16, (unsigned short)(data | 0x0F));	/* assume lowest speed DRAM */
 
     XGINew_SetDRAMModeRegister( pVBInfo ) ;
     XGINew_DisableRefresh( HwDeviceExtension, pVBInfo ) ;
@@ -1485,11 +1438,11 @@ void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 
 
 
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x16 , pVBInfo->SR15[ 1 ][ XGINew_RAMType ] ) ;	/* restore SR16 */
+    XGINew_SetReg1(pVBInfo->P3c4, 0x16, pVBInfo->SR15[1][XGINew_RAMType]); /* restore SR16 */
 
     XGINew_EnableRefresh(  HwDeviceExtension, pVBInfo ) ;
     data=XGINew_GetReg1( pVBInfo->P3c4 ,0x21 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x21 , ( USHORT )( data | 0x20 ) ) ;	/* enable read cache */
+    XGINew_SetReg1(pVBInfo->P3c4, 0x21, (unsigned short)(data | 0x20));	/* enable read cache */
 }
 
 
@@ -1501,14 +1454,14 @@ void XGINew_SetDRAMSize_310( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 /* Description : */
 /* --------------------------------------------------------------------- */
 
-void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGINew_SetDRAMModeRegister340(struct xgi_hw_device_info *HwDeviceExtension)
 {
-    UCHAR data ;
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    unsigned char data ;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
     pVBInfo->ISXPDOS = 0 ;
 
     pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
@@ -1555,7 +1508,7 @@ void XGINew_SetDRAMModeRegister340( PXGI_HW_DEVICE_INFO HwDeviceExtension )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMModeRegister( PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetDRAMModeRegister(struct vb_device_info *pVBInfo)
 {
     if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
     {
@@ -1575,9 +1528,9 @@ void XGINew_SetDRAMModeRegister( PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DisableRefresh(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT  data ;
+    unsigned short  data ;
 
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x1B ) ;
@@ -1593,7 +1546,7 @@ void XGINew_DisableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_I
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_EnableRefresh(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , pVBInfo->SR15[ 3 ][ XGINew_RAMType ] ) ;	/* SR1B */
@@ -1608,9 +1561,11 @@ void XGINew_EnableRefresh( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_IN
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DisableChannelInterleaving( int index , USHORT XGINew_DDRDRAM_TYPE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DisableChannelInterleaving(int index,
+				       unsigned short XGINew_DDRDRAM_TYPE[][5],
+				       struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data ;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x15 ) ;
     data &= 0x1F ;
@@ -1642,9 +1597,11 @@ void XGINew_DisableChannelInterleaving( int index , USHORT XGINew_DDRDRAM_TYPE[]
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMSizingType( int index , USHORT DRAMTYPE_TABLE[][ 5 ] ,PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetDRAMSizingType(int index,
+			      unsigned short DRAMTYPE_TABLE[][5],
+			      struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data;
 
     data = DRAMTYPE_TABLE[ index ][ 4 ] ;
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x13 , 0x80 , data ) ;
@@ -1659,12 +1616,12 @@ void XGINew_SetDRAMSizingType( int index , USHORT DRAMTYPE_TABLE[][ 5 ] ,PVB_DEV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
+void XGINew_CheckBusWidth_310(struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
-    PULONG volatile pVideoMemory ;
+    unsigned short data ;
+    volatile unsigned long *pVideoMemory ;
 
-    pVideoMemory = (PULONG) pVBInfo->FBAddr;
+    pVideoMemory = (unsigned long *) pVBInfo->FBAddr;
 
     if ( XGINew_Get310DRAMType( pVBInfo ) < 2 )
     {
@@ -1690,7 +1647,7 @@ void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
             XGINew_DataBusWidth = 64 ;
             XGINew_ChannelAB = 0 ;
             data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
-            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( data & 0xFD ) ) ;
+	    XGINew_SetReg1(pVBInfo->P3c4, 0x14, (unsigned short)(data & 0xFD));
         }
 
         if ( ( pVideoMemory[ 1 ] != 0x456789ABL ) || ( pVideoMemory[ 0 ] != 0x01234567L ) )
@@ -1699,7 +1656,8 @@ void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
             XGINew_DataBusWidth = 64 ;
             XGINew_ChannelAB = 1 ;
             data=XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
-            XGINew_SetReg1( pVBInfo->P3c4 , 0x14 , ( USHORT )( ( data & 0xFD ) | 0x01 ) ) ;
+	    XGINew_SetReg1(pVBInfo->P3c4, 0x14,
+			   (unsigned short)((data & 0xFD) | 0x01));
         }
 
         return ;
@@ -1792,9 +1750,13 @@ void XGINew_CheckBusWidth_310(  PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_SetRank( int index , UCHAR RankNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+int XGINew_SetRank(int index,
+		   unsigned char RankNo,
+		   unsigned char XGINew_ChannelAB,
+		   unsigned short DRAMTYPE_TABLE[][5],
+		   struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data;
     int RankSize ;
 
     if ( ( RankNo == 2 ) && ( DRAMTYPE_TABLE[ index ][ 0 ] == 2 ) )
@@ -1829,9 +1791,13 @@ int XGINew_SetRank( int index , UCHAR RankNo , UCHAR XGINew_ChannelAB , USHORT D
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_SetDDRChannel( int index , UCHAR ChannelNo , UCHAR XGINew_ChannelAB , USHORT DRAMTYPE_TABLE[][ 5 ] , PVB_DEVICE_INFO pVBInfo)
+int XGINew_SetDDRChannel(int index,
+			 unsigned char ChannelNo,
+			 unsigned char XGINew_ChannelAB,
+			 unsigned short DRAMTYPE_TABLE[][5],
+			 struct vb_device_info *pVBInfo)
 {
-    USHORT  data ;
+    unsigned short data;
     int RankSize ;
 
     RankSize = DRAMTYPE_TABLE[index][3]/2 * XGINew_DataBusWidth/32;
@@ -1865,30 +1831,29 @@ int XGINew_SetDDRChannel( int index , UCHAR ChannelNo , UCHAR XGINew_ChannelAB ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckColumn( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckColumn(int index,
+		       unsigned short DRAMTYPE_TABLE[][5],
+		       struct vb_device_info *pVBInfo)
 {
     int i ;
-    ULONG Increment , Position ;
+    unsigned long Increment , Position ;
 
     /* Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 1 ) ; */
     Increment = 1 << ( 10 + XGINew_DataBusWidth / 64 ) ;
 
     for( i = 0 , Position = 0 ; i < 2 ; i++ )
     {
-        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
-        Position += Increment ;
+	    *((unsigned long *)(pVBInfo->FBAddr + Position)) = Position;
+	    Position += Increment ;
     }
 
-#ifdef WIN2000  /* chiawen for linux solution */
-    DelayUS( 100 ) ;
-#endif
 
     for( i = 0 , Position = 0 ; i < 2 ; i++ )
     {
         /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
-        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
-            return( 0 ) ;
-        Position += Increment ;
+	    if ((*(unsigned long *)(pVBInfo->FBAddr + Position)) != Position)
+		    return 0;
+	    Position += Increment;
     }
     return( 1 ) ;
 }
@@ -1900,26 +1865,28 @@ int XGINew_CheckColumn( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INF
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckBanks( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckBanks(int index,
+		      unsigned short DRAMTYPE_TABLE[][5],
+		      struct vb_device_info *pVBInfo)
 {
     int i ;
-    ULONG Increment , Position ;
+    unsigned long Increment , Position ;
 
     Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + XGINew_DataBusWidth / 64 + 2 ) ;
 
     for( i = 0 , Position = 0 ; i < 4 ; i++ )
     {
         /* pVBInfo->FBAddr[ Position ] = Position ; */
-        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
-        Position += Increment ;
+	    *((unsigned long *)(pVBInfo->FBAddr + Position)) = Position;
+	    Position += Increment ;
     }
 
     for( i = 0 , Position = 0 ; i < 4 ; i++ )
     {
         /* if (pVBInfo->FBAddr[ Position ] != Position ) */
-        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
-            return( 0 ) ;
-        Position += Increment ;
+	    if ((*(unsigned long *)(pVBInfo->FBAddr + Position)) != Position)
+		    return 0;
+	    Position += Increment;
     }
     return( 1 ) ;
 }
@@ -1931,10 +1898,12 @@ int XGINew_CheckBanks( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckRank(int RankNo, int index,
+		     unsigned short DRAMTYPE_TABLE[][5],
+		     struct vb_device_info *pVBInfo)
 {
     int i ;
-    ULONG Increment , Position ;
+    unsigned long Increment , Position ;
 
     Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
                   DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
@@ -1942,18 +1911,18 @@ int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB
     for( i = 0 , Position = 0 ; i < 2 ; i++ )
     {
         /* pVBInfo->FBAddr[ Position ] = Position ; */
-        /* *( ( PULONG )( pVBInfo->FBAddr ) ) = Position ; */
-        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
-        Position += Increment ;
+        /* *( (unsigned long *)( pVBInfo->FBAddr ) ) = Position ; */
+	    *((unsigned long *)(pVBInfo->FBAddr + Position)) = Position;
+	    Position += Increment;
     }
 
     for( i = 0 , Position = 0 ; i < 2 ; i++ )
     {
         /* if ( pVBInfo->FBAddr[ Position ] != Position ) */
-        /* if ( ( *( PULONG )( pVBInfo->FBAddr ) ) != Position ) */
-        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
-            return( 0 ) ;
-        Position += Increment ;
+        /* if ( ( *(unsigned long *)( pVBInfo->FBAddr ) ) != Position ) */
+	    if ((*(unsigned long *)(pVBInfo->FBAddr + Position)) != Position)
+		    return 0;
+	    Position += Increment;
     }
     return( 1 );
 }
@@ -1965,10 +1934,12 @@ int XGINew_CheckRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckDDRRank(int RankNo, int index,
+			unsigned short DRAMTYPE_TABLE[][5],
+			struct vb_device_info *pVBInfo)
 {
-    ULONG Increment , Position ;
-    USHORT data ;
+    unsigned long Increment , Position ;
+    unsigned short data ;
 
     Increment = 1 << ( DRAMTYPE_TABLE[ index ][ 2 ] + DRAMTYPE_TABLE[ index ][ 1 ] +
                        DRAMTYPE_TABLE[ index ][ 0 ] + XGINew_DataBusWidth / 64 + RankNo ) ;
@@ -1976,18 +1947,18 @@ int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ],
     Increment += Increment / 2 ;
 
     Position = 0;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 0 ) ) = 0x01234567 ;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 1 ) ) = 0x456789AB ;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 2 ) ) = 0x55555555 ;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 3 ) ) = 0x55555555 ;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 4 ) ) = 0xAAAAAAAA ;
-    *( ( PULONG )( pVBInfo->FBAddr + Position + 5 ) ) = 0xAAAAAAAA ;
-
-    if ( ( *( PULONG )( pVBInfo->FBAddr + 1 ) ) == 0x456789AB )
-        return( 1 ) ;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 0)) = 0x01234567;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 1)) = 0x456789AB;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 2)) = 0x55555555;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 3)) = 0x55555555;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 4)) = 0xAAAAAAAA;
+    *((unsigned long *)(pVBInfo->FBAddr + Position + 5)) = 0xAAAAAAAA;
 
-    if ( ( *( PULONG )( pVBInfo->FBAddr + 0 ) ) == 0x01234567 )
-        return( 0 ) ;
+    if ((*(unsigned long *)(pVBInfo->FBAddr + 1)) == 0x456789AB)
+	    return 1;
+
+    if ((*(unsigned long *)(pVBInfo->FBAddr + 0)) == 0x01234567)
+	    return 0;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x14 ) ;
     data &= 0xF3 ;
@@ -2007,7 +1978,9 @@ int XGINew_CheckDDRRank( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ],
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckRanks(int RankNo, int index,
+		      unsigned short DRAMTYPE_TABLE[][5],
+		      struct vb_device_info *pVBInfo)
 {
     int r ;
 
@@ -2033,7 +2006,9 @@ int XGINew_CheckRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_CheckDDRRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+int XGINew_CheckDDRRanks(int RankNo, int index,
+			 unsigned short DRAMTYPE_TABLE[][5],
+			 struct vb_device_info *pVBInfo)
 {
     int r ;
 
@@ -2059,10 +2034,10 @@ int XGINew_CheckDDRRanks( int RankNo , int index , USHORT DRAMTYPE_TABLE[][ 5 ],
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
+int XGINew_SDRSizing(struct vb_device_info *pVBInfo)
 {
     int    i ;
-    UCHAR  j ;
+    unsigned char  j ;
 
     for( i = 0 ; i < 13 ; i++ )
     {
@@ -2070,7 +2045,8 @@ int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
 
         for( j = 2 ; j > 0 ; j-- )
         {
-            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_SDRDRAM_TYPE , pVBInfo) )
+	    if (!XGINew_SetRank(i, (unsigned char)j, XGINew_ChannelAB,
+				 XGINew_SDRDRAM_TYPE, pVBInfo))
                 continue ;
             else
             {
@@ -2089,11 +2065,13 @@ int XGINew_SDRSizing(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGINew_SetDRAMSizeReg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+unsigned short XGINew_SetDRAMSizeReg(int index,
+				     unsigned short DRAMTYPE_TABLE[][5],
+				     struct vb_device_info *pVBInfo)
 {
-    USHORT data = 0 , memsize = 0 ;
+    unsigned short data = 0 , memsize = 0;
     int RankSize ;
-    UCHAR ChannelNo ;
+    unsigned char ChannelNo ;
 
     RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 32 ;
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
@@ -2138,11 +2116,13 @@ USHORT XGINew_SetDRAMSizeReg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVI
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGINew_SetDRAMSize20Reg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DEVICE_INFO pVBInfo)
+unsigned short XGINew_SetDRAMSize20Reg(int index,
+				       unsigned short DRAMTYPE_TABLE[][5],
+				       struct vb_device_info *pVBInfo)
 {
-    USHORT data = 0 , memsize = 0 ;
+    unsigned short data = 0 , memsize = 0;
     int RankSize ;
-    UCHAR ChannelNo ;
+    unsigned char ChannelNo ;
 
     RankSize = DRAMTYPE_TABLE[ index ][ 3 ] * XGINew_DataBusWidth / 8 ;
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x13 ) ;
@@ -2188,31 +2168,32 @@ USHORT XGINew_SetDRAMSize20Reg( int index , USHORT DRAMTYPE_TABLE[][ 5 ], PVB_DE
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_ReadWriteRest( USHORT StopAddr , USHORT StartAddr, PVB_DEVICE_INFO pVBInfo)
+int XGINew_ReadWriteRest(unsigned short StopAddr, unsigned short StartAddr,
+			 struct vb_device_info *pVBInfo)
 {
     int i ;
-    ULONG Position = 0 ;
+    unsigned long Position = 0 ;
 
-   *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+    *((unsigned long *)(pVBInfo->FBAddr + Position)) = Position;
 
     for( i = StartAddr ; i <= StopAddr ; i++ )
     {
         Position = 1 << i ;
-        *( ( PULONG )( pVBInfo->FBAddr + Position ) ) = Position ;
+	*((unsigned long *)(pVBInfo->FBAddr + Position)) = Position;
     }
 
     DelayUS( 500 ) ;	/* [Vicent] 2004/04/16. Fix #1759 Memory Size error in Multi-Adapter. */
 
     Position = 0 ;
 
-   if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
-        return( 0 ) ;
+   if ((*(unsigned long *)(pVBInfo->FBAddr + Position)) != Position)
+	   return 0;
 
     for( i = StartAddr ; i <= StopAddr ; i++ )
     {
         Position = 1 << i ;
-        if ( ( *( PULONG )( pVBInfo->FBAddr + Position ) ) != Position )
-            return( 0 ) ;
+	if ((*(unsigned long *)(pVBInfo->FBAddr + Position)) != Position)
+		return 0;
     }
     return( 1 ) ;
 }
@@ -2224,9 +2205,9 @@ int XGINew_ReadWriteRest( USHORT StopAddr , USHORT StartAddr, PVB_DEVICE_INFO pV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGINew_CheckFrequence( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGINew_CheckFrequence(struct vb_device_info *pVBInfo)
 {
-    UCHAR data ;
+    unsigned char data ;
 
     data = XGINew_GetReg1( pVBInfo->P3d4 , 0x97 ) ;
 
@@ -2247,9 +2228,9 @@ UCHAR XGINew_CheckFrequence( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_CheckChannel( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGINew_CheckChannel(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    UCHAR data;
+    unsigned char data;
 
     switch( HwDeviceExtension->jChipType )
     {
@@ -2528,10 +2509,10 @@ void XGINew_CheckChannel( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+int XGINew_DDRSizing340(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
     int i ;
-    USHORT memsize , addr ;
+    unsigned short memsize , addr ;
 
     XGINew_SetReg1( pVBInfo->P3c4 , 0x15 , 0x00 ) ;	/* noninterleaving */
     XGINew_SetReg1( pVBInfo->P3c4 , 0x1C , 0x00 ) ;	/* nontiling */
@@ -2548,7 +2529,7 @@ int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
             continue ;
 
         addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
-        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+	if ((HwDeviceExtension->ulVideoMemorySize - 1) < (unsigned long)(1 << addr))
             continue ;
 
         if ( XGINew_ReadWriteRest( addr , 5, pVBInfo ) == 1 )
@@ -2566,7 +2547,7 @@ int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
             continue ;
 
         addr = memsize + ( XGINew_ChannelAB - 2 ) + 20 ;
-        if ( ( HwDeviceExtension->ulVideoMemorySize - 1 ) < ( ULONG )( 1 << addr ) )
+	if ((HwDeviceExtension->ulVideoMemorySize - 1) < (unsigned long)(1 << addr))
             continue ;
 
         if ( XGINew_ReadWriteRest( addr , 9, pVBInfo ) == 1 )
@@ -2583,10 +2564,10 @@ int XGINew_DDRSizing340( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
+int XGINew_DDRSizing(struct vb_device_info *pVBInfo)
 {
     int    i ;
-    UCHAR  j ;
+    unsigned char  j ;
 
     for( i = 0 ; i < 4 ; i++ )
     {
@@ -2595,7 +2576,8 @@ int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
         for( j = 2 ; j > 0 ; j-- )
         {
             XGINew_SetDDRChannel( i , j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE , pVBInfo ) ;
-            if ( !XGINew_SetRank( i , ( UCHAR )j , XGINew_ChannelAB , XGINew_DDRDRAM_TYPE, pVBInfo ) )
+	    if (!XGINew_SetRank(i, (unsigned char)j, XGINew_ChannelAB,
+				XGINew_DDRDRAM_TYPE, pVBInfo))
                 continue ;
             else
             {
@@ -2613,7 +2595,7 @@ int XGINew_DDRSizing(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGINew_SetMemoryClock(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
 
 
@@ -2634,9 +2616,7 @@ void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_IN
       if ( ( pVBInfo->MCLKData[ XGINew_RAMType ].SR28 == 0x1C ) && ( pVBInfo->MCLKData[ XGINew_RAMType ].SR29 == 0x01 )
         && ( ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x1C ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) )
         || ( ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2E == 0x22 ) && ( pVBInfo->ECLKData[ XGINew_RAMType ].SR2F == 0x01 ) ) ) )
-      {
-      	XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , ( ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) & 0xFC ) | 0x02 ) ;
-      }
+	      XGINew_SetReg1(pVBInfo->P3c4, 0x32, ((unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x32) & 0xFC) | 0x02);
     }
 }
 
@@ -2647,12 +2627,12 @@ void XGINew_SetMemoryClock( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_IN
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN ChkLFB( PVB_DEVICE_INFO pVBInfo )
+unsigned char ChkLFB(struct vb_device_info *pVBInfo)
 {
-    if ( LFBDRAMTrap & XGINew_GetReg1( pVBInfo->P3d4 , 0x78 ) )
-        return( TRUE ) ;
-    else
-        return( FALSE );
+	if (LFBDRAMTrap & XGINew_GetReg1(pVBInfo->P3d4 , 0x78))
+		return 1;
+	else
+		return 0;
 }
 
 
@@ -2664,17 +2644,18 @@ BOOLEAN ChkLFB( PVB_DEVICE_INFO pVBInfo )
 /* in second chip, assume CR A1 D[6]="1" in this case */
 /* output : none */
 /* --------------------------------------------------------------------- */
-void SetPowerConsume ( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG XGI_P3d4Port )
+void SetPowerConsume(struct xgi_hw_device_info *HwDeviceExtension,
+		     unsigned long XGI_P3d4Port)
 {
-    ULONG   lTemp ;
-    UCHAR   bTemp;
+    unsigned long   lTemp ;
+    unsigned char   bTemp;
 
     HwDeviceExtension->pQueryVGAConfigSpace( HwDeviceExtension , 0x08 , 0 , &lTemp ) ; /* Get */
     if ((lTemp&0xFF)==0)
     {
         /* set CR58 D[5]=0 D[3]=0 */
         XGINew_SetRegAND( XGI_P3d4Port , 0x58 , 0xD7 ) ;
-        bTemp = (UCHAR) XGINew_GetReg1( XGI_P3d4Port , 0xCB ) ;
+	bTemp = (unsigned char) XGINew_GetReg1(XGI_P3d4Port, 0xCB);
     	if (bTemp&0x20)
     	{
             if (!(bTemp&0x10))
@@ -2692,15 +2673,13 @@ void SetPowerConsume ( PXGI_HW_DEVICE_INFO HwDeviceExtension , ULONG XGI_P3d4Por
 }
 
 
-
-#if defined(LINUX_XF86)||defined(LINUX_KERNEL)
-void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGINew_InitVBIOSData(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
 
-	/* ULONG ROMAddr = (ULONG)HwDeviceExtension->pjVirtualRomBase; */
+	/* unsigned long ROMAddr = (unsigned long)HwDeviceExtension->pjVirtualRomBase; */
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
     pVBInfo->ISXPDOS = 0 ;
 
     pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
@@ -2736,7 +2715,6 @@ void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 	}
 
 }
-#endif /* For Linux */
 
 /* --------------------------------------------------------------------- */
 /* Function : ReadVBIOSTablData */
@@ -2744,200 +2722,11 @@ void XGINew_InitVBIOSData(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
+void ReadVBIOSTablData(unsigned char ChipType, struct vb_device_info *pVBInfo)
 {
-    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
-    ULONG   i ;
-    UCHAR   j , k ;
-#if 0
-    ULONG   ii , jj ;
-    i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;		/* UniROM */
-    if ( i != 0 )
-        UNIROM = 1 ;
-
-    ii = 0x90 ;
-    for( jj = 0x00 ; jj < 0x08 ; jj++ )
-    {
-        pVBInfo->MCLKData[ jj ].SR28 = pVideoMemory[ ii ] ;
-        pVBInfo->MCLKData[ jj ].SR29 = pVideoMemory[ ii + 1] ;
-        pVBInfo->MCLKData[ jj ].SR2A = pVideoMemory[ ii + 2] ;
-        pVBInfo->MCLKData[ jj ].CLOCK = pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
-        ii += 0x05 ;
-    }
-
-    ii = 0xB8 ;
-    for( jj = 0x00 ; jj < 0x08 ; jj++ )
-    {
-        pVBInfo->ECLKData[ jj ].SR2E = pVideoMemory[ ii ] ;
-        pVBInfo->ECLKData[ jj ].SR2F=pVideoMemory[ ii + 1 ] ;
-        pVBInfo->ECLKData[ jj ].SR30= pVideoMemory[ ii + 2 ] ;
-        pVBInfo->ECLKData[ jj ].CLOCK= pVideoMemory[ ii + 3 ] | ( pVideoMemory[ ii + 4 ] << 8 ) ;
-        ii += 0x05 ;
-    }
-
-    /* Volari customize data area start */
-    /* if ( ChipType == XG40 ) */
-    if ( ChipType >= XG40 )
-    {
-        ii = 0xE0 ;
-        for( jj = 0x00 ; jj < 0x03 ; jj++ )
-        {
-            pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR13, SR14, and SR18 */
-            pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
-            pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
-            pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
-            pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
-            pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
-            pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
-            pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
-            ii += 0x08 ;
-        }
-        ii = 0x110 ;
-        jj = 0x03 ;
-        pVBInfo->SR15[ jj ][ 0 ] = pVideoMemory[ ii ] ;		/* SR1B */
-        pVBInfo->SR15[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
-        pVBInfo->SR15[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
-        pVBInfo->SR15[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
-        pVBInfo->SR15[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
-        pVBInfo->SR15[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
-        pVBInfo->SR15[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
-        pVBInfo->SR15[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
-
-        *pVBInfo->pSR07 = pVideoMemory[ 0x74 ] ;
-        *pVBInfo->pSR1F = pVideoMemory[ 0x75 ] ;
-        *pVBInfo->pSR21 = pVideoMemory[ 0x76 ] ;
-        *pVBInfo->pSR22 = pVideoMemory[ 0x77 ] ;
-        *pVBInfo->pSR23 = pVideoMemory[ 0x78 ] ;
-        *pVBInfo->pSR24 = pVideoMemory[ 0x79 ] ;
-        pVBInfo->SR25[ 0 ] = pVideoMemory[ 0x7A ] ;
-        *pVBInfo->pSR31 = pVideoMemory[ 0x7B ] ;
-        *pVBInfo->pSR32 = pVideoMemory[ 0x7C ] ;
-        *pVBInfo->pSR33 = pVideoMemory[ 0x7D ] ;
-        ii = 0xF8 ;
-
-        for( jj = 0 ; jj < 3 ; jj++ )
-        {
-            pVBInfo->CR40[ jj ][ 0 ] = pVideoMemory[ ii ] ;
-            pVBInfo->CR40[ jj ][ 1 ] = pVideoMemory[ ii + 1 ] ;
-            pVBInfo->CR40[ jj ][ 2 ] = pVideoMemory[ ii + 2 ] ;
-            pVBInfo->CR40[ jj ][ 3 ] = pVideoMemory[ ii + 3 ] ;
-            pVBInfo->CR40[ jj ][ 4 ] = pVideoMemory[ ii + 4 ] ;
-            pVBInfo->CR40[ jj ][ 5 ] = pVideoMemory[ ii + 5 ] ;
-            pVBInfo->CR40[ jj ][ 6 ] = pVideoMemory[ ii + 6 ] ;
-            pVBInfo->CR40[ jj ][ 7 ] = pVideoMemory[ ii + 7 ] ;
-            ii += 0x08 ;
-        }
-
-        ii = 0x118 ;
-        for( j = 3 ; j < 24 ; j++ )
-        {
-            pVBInfo->CR40[ j ][ 0 ] = pVideoMemory[ ii ] ;
-            pVBInfo->CR40[ j ][ 1 ] = pVideoMemory[ ii + 1 ] ;
-            pVBInfo->CR40[ j ][ 2 ] = pVideoMemory[ ii + 2 ] ;
-            pVBInfo->CR40[ j ][ 3 ] = pVideoMemory[ ii + 3 ] ;
-            pVBInfo->CR40[ j ][ 4 ] = pVideoMemory[ ii + 4 ] ;
-            pVBInfo->CR40[ j ][ 5 ] = pVideoMemory[ ii + 5 ] ;
-            pVBInfo->CR40[ j ][ 6 ] = pVideoMemory[ ii + 6 ] ;
-            pVBInfo->CR40[ j ][ 7 ] = pVideoMemory[ ii + 7 ] ;
-            ii += 0x08 ;
-        }
-
-        i = pVideoMemory[ 0x1C0 ] | ( pVideoMemory[ 0x1C1 ] << 8 ) ;
-
-        for( j = 0 ; j < 8 ; j++ )
-        {
-            for( k = 0 ; k < 4 ; k++ )
-                pVBInfo->CR6B[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
-        }
-
-        i = pVideoMemory[ 0x1C2 ] | ( pVideoMemory[ 0x1C3 ] << 8 ) ;
-
-        for( j = 0 ; j < 8 ; j++ )
-        {
-            for( k = 0 ; k < 4 ; k++ )
-                pVBInfo->CR6E[ j ][ k ] = pVideoMemory[ i + 4 * j + k ] ;
-        }
-
-        i = pVideoMemory[ 0x1C4 ] | ( pVideoMemory[ 0x1C5 ] << 8 ) ;
-        for( j = 0 ; j < 8 ; j++ )
-        {
-            for( k = 0 ; k < 32 ; k++ )
-                pVBInfo->CR6F[ j ][ k ] = pVideoMemory[ i + 32 * j + k ] ;
-        }
-
-        i = pVideoMemory[ 0x1C6 ] | ( pVideoMemory[ 0x1C7 ] << 8 ) ;
-
-        for( j = 0 ; j < 8 ; j++ )
-        {
-            for( k = 0 ; k < 2 ; k++ )
-                pVBInfo->CR89[ j ][ k ] = pVideoMemory[ i + 2 * j + k ] ;
-        }
-
-        i = pVideoMemory[ 0x1C8 ] | ( pVideoMemory[ 0x1C9 ] << 8 ) ;
-        for( j = 0 ; j < 12 ; j++ )
-            pVBInfo->AGPReg[ j ] = pVideoMemory[ i + j ] ;
-
-        i = pVideoMemory[ 0x1CF ] | ( pVideoMemory[ 0x1D0 ] << 8 ) ;
-        for( j = 0 ; j < 4 ; j++ )
-            pVBInfo->SR16[ j ] = pVideoMemory[ i + j ] ;
-
-        if ( ChipType == XG21 )
-        {
-            if (pVideoMemory[ 0x67 ] & 0x80)
-            {
-                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
-            }
-            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
-            {
-                *pVBInfo->pCR2E = pVideoMemory[ i + 4 ] ;
-                *pVBInfo->pCR2F = pVideoMemory[ i + 5 ] ;
-                *pVBInfo->pCR46 = pVideoMemory[ i + 6 ] ;
-                *pVBInfo->pCR47 = pVideoMemory[ i + 7 ] ;
-            }
-        }
-
-        if ( ChipType == XG27 )
-        {
-            jj = i+j;
-            for( i = 0 ; i <= 0xB ; i++,jj++ )
-              pVBInfo->pCRD0[i] = pVideoMemory[ jj ] ;
-            for( i = 0x0 ; i <= 0x1 ; i++,jj++ )
-              pVBInfo->pCRDE[i] = pVideoMemory[ jj ] ;
-
-            *pVBInfo->pSR40 = pVideoMemory[ jj ] ;
-            jj++;
-            *pVBInfo->pSR41 = pVideoMemory[ jj ] ;
-
-            if (pVideoMemory[ 0x67 ] & 0x80)
-            {
-                *pVBInfo->pDVOSetting = pVideoMemory[ 0x67 ];
-            }
-            if ( (pVideoMemory[ 0x67 ] & 0xC0) == 0xC0 )
-            {
-                jj++;
-                *pVBInfo->pCR2E = pVideoMemory[ jj ] ;
-                *pVBInfo->pCR2F = pVideoMemory[ jj + 1 ] ;
-                *pVBInfo->pCR46 = pVideoMemory[ jj + 2 ] ;
-                *pVBInfo->pCR47 = pVideoMemory[ jj + 3 ] ;
-            }
-
-        }
-
-        *pVBInfo->pCRCF = pVideoMemory[ 0x1CA ] ;
-        *pVBInfo->pXGINew_DRAMTypeDefinition = pVideoMemory[ 0x1CB ] ;
-        *pVBInfo->pXGINew_I2CDefinition = pVideoMemory[ 0x1D1 ] ;
-        if ( ChipType >= XG20 )
-        {
-           *pVBInfo->pXGINew_CR97 = pVideoMemory[ 0x1D2 ] ;
-           if ( ChipType == XG27 )
-           {
-             *pVBInfo->pSR36 = pVideoMemory[ 0x1D3 ] ;
-             *pVBInfo->pCR8F = pVideoMemory[ 0x1D5 ] ;
-           }
-        }
-
-    }
-#endif
+	volatile unsigned char *pVideoMemory = (unsigned char *)pVBInfo->ROMAddr;
+    unsigned long   i ;
+    unsigned char   j, k ;
     /* Volari customize data area end */
 
     if ( ChipType == XG21 )
@@ -2972,7 +2761,8 @@ void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
                 i += 25;
                 j--;
                 k++;
-              } while ( (j>0) && ( k < (sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct)) ) );
+	      } while ((j > 0) &&
+		       (k < (sizeof(XGI21_LCDCapList)/sizeof(struct XGI21_LVDSCapStruct))));
             }
             else
             {
@@ -3003,7 +2793,7 @@ void ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
+void XGINew_DDR1x_MRS_XG20(unsigned long P3c4, struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetReg1( P3c4 , 0x18 , 0x01 ) ;
@@ -3039,13 +2829,13 @@ void XGINew_DDR1x_MRS_XG20( ULONG P3c4 , PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGINew_SetDRAMModeRegister_XG20(struct xgi_hw_device_info *HwDeviceExtension)
 {
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
     pVBInfo->ISXPDOS = 0 ;
 
     pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
@@ -3078,13 +2868,13 @@ void XGINew_SetDRAMModeRegister_XG20( PXGI_HW_DEVICE_INFO HwDeviceExtension )
     XGINew_SetReg1( pVBInfo->P3c4 , 0x1B , 0x03 ) ;
 }
 
-void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGINew_SetDRAMModeRegister_XG27(struct xgi_hw_device_info *HwDeviceExtension)
 {
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
     pVBInfo->ISXPDOS = 0 ;
 
     pVBInfo->P3c4 = pVBInfo->BaseAddr + 0x14 ;
@@ -3120,13 +2910,12 @@ void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
 
 }
 /*
-void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGINew_SetDRAMModeRegister_XG27(struct xgi_hw_device_info *HwDeviceExtension)
 {
-#ifndef LINUX_XF86
-    UCHAR data ;
-#endif
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+
+    unsigned char data ;
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
     pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ;
     pVBInfo->BaseAddr = HwDeviceExtension->pjIOAddress ;
@@ -3168,9 +2957,9 @@ void XGINew_SetDRAMModeRegister_XG27( PXGI_HW_DEVICE_INFO HwDeviceExtension )
 /* Output : */
 /* Description : */
 /* -------------------------------------------------------- */
-void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGINew_ChkSenseStatus(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx=0 , temp , tempcx , CR3CData;
+    unsigned short tempbx = 0, temp, tempcx, CR3CData;
 
     temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x32 ) ;
 
@@ -3229,9 +3018,9 @@ void XGINew_ChkSenseStatus ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 /* Output : */
 /* Description : */
 /* -------------------------------------------------------- */
-void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo )
+void XGINew_SetModeScratch(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT temp , tempcl = 0 , tempch = 0 , CR31Data , CR38Data;
+    unsigned short temp , tempcl = 0 , tempch = 0 , CR31Data , CR38Data;
 
     temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x3d ) ;
     temp |= XGINew_GetReg1( pVBInfo->P3d4 , 0x3e ) << 8 ;
@@ -3326,23 +3115,13 @@ void XGINew_SetModeScratch ( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_
 /* Output : */
 /* Description : */
 /* -------------------------------------------------------- */
-void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGINew_GetXG21Sense(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    UCHAR Temp;
-    PUCHAR  volatile pVideoMemory = ( PUCHAR )pVBInfo->ROMAddr ;
+    unsigned char Temp;
+    volatile unsigned char *pVideoMemory = (unsigned char *)pVBInfo->ROMAddr;
 
     pVBInfo->IF_DEF_LVDS = 0 ;
 
-#ifdef WIN2000
-   pVBInfo->IF_DEF_CH7007 = 0 ;
-    if ( ( pVideoMemory[ 0x65 ] & 0x02 ) )			/* For XG21 CH7007 */
-    {
-        /* VideoDebugPrint((0, "ReadVBIOSTablData: pVideoMemory[ 0x65 ] =%x\n",pVideoMemory[ 0x65 ])); */
-        pVBInfo->IF_DEF_CH7007 = 1 ;                            /* [Billy] 07/05/03 */
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x38 , ~0xE0 , 0x60 ) ; /* CH7007 on chip */
-    }
-    else
-#endif
 #if 1
     if (( pVideoMemory[ 0x65 ] & 0x01 ) )			/* For XG21 LVDS */
     {
@@ -3378,9 +3157,9 @@ void XGINew_GetXG21Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* -------------------------------------------------------- */
-void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGINew_GetXG27Sense(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    UCHAR Temp,bCR4A;
+	unsigned char Temp, bCR4A;
 
      pVBInfo->IF_DEF_LVDS = 0 ;
      bCR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
@@ -3402,9 +3181,9 @@ void XGINew_GetXG27Sense(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 
 }
 
-UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+unsigned char GetXG21FPBits(struct vb_device_info *pVBInfo)
 {
-    UCHAR CR38,CR4A,temp;
+	unsigned char CR38, CR4A, temp;
 
     CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x10 , 0x10 ) ; /* enable GPIOE read */
@@ -3422,9 +3201,9 @@ UCHAR GetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
     return temp;
 }
 
-UCHAR GetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+unsigned char GetXG27FPBits(struct vb_device_info *pVBInfo)
 {
-    UCHAR CR4A,temp;
+	unsigned char CR4A, temp;
 
     CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x4A , ~0x03 , 0x03 ) ; /* enable GPIOA/B/C read */
diff --git a/drivers/staging/xgifb/vb_init.h b/drivers/staging/xgifb/vb_init.h
index 1f39d9c74cd..b47352b8e34 100644
--- a/drivers/staging/xgifb/vb_init.h
+++ b/drivers/staging/xgifb/vb_init.h
@@ -1,7 +1,7 @@
 #ifndef  _VBINIT_
 #define  _VBINIT_
-extern   BOOLEAN    XGIInitNew( PXGI_HW_DEVICE_INFO HwDeviceExtension ) ;
-extern XGI21_LVDSCapStruct  XGI21_LCDCapList[13];
+extern   unsigned char    XGIInitNew(struct xgi_hw_device_info *HwDeviceExtension) ;
+extern struct XGI21_LVDSCapStruct  XGI21_LCDCapList[13];
 
 #endif
 
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index bd7f7389864..d90bf06bf62 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -1,43 +1,9 @@
-#include "osdef.h"
 
-#ifdef TC
-#include <stdio.h>
-#include <string.h>
-#include <conio.h>
-#include <dos.h>
-#endif
-
-
-#ifdef LINUX_XF86
-#include "xf86.h"
-#include "xf86PciInfo.h"
-#include "xgi.h"
-#include "xgi_regs.h"
-#endif
-
-#ifdef LINUX_KERNEL
 #include <asm/io.h>
 #include <linux/types.h>
 #include <linux/version.h>
 #include "XGIfb.h"
-/*#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
-#include <video/XGIfb.h>
-#else
-#include <linux/XGIfb.h>
-#endif*/
-#endif
-
-#ifdef WIN2000
-#include <dderror.h>
-#include <devioctl.h>
-#include <miniport.h>
-#include <ntddvdeo.h>
-#include <video.h>
 
-#include "xgiv.h"
-#include "dd_i2c.h"
-#include "tools.h"
-#endif
 
 #include "vb_def.h"
 #include "vgatypes.h"
@@ -54,194 +20,218 @@
 
 
 
-BOOLEAN  XGI_IsLCDDualLink(PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_BacklightByDrv(PVB_DEVICE_INFO pVBInfo);
-
-BOOLEAN  XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_AjustCRT2Rate(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,USHORT *i, PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
-BOOLEAN  XGI_BridgeIsOn(PVB_DEVICE_INFO pVBInfo);
-UCHAR    XGI_GetModePtr( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
-USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetColorDepth(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetVGAHT2(PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetVCLK2Ptr(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo);
-void     XGI_VBLongWait(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SaveCRT2Info(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetCRT2Data(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetCRT2ResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_PreSetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetGroup1(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetLockRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetGroup2(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetGroup5(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void*    XGI_GetLcdPtr(USHORT BX,  USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void*    XGI_GetTVPtr(USHORT BX, USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_EnablePWD( PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo);
-void     XGI_AutoThreshold( PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo);
-
-void     XGI_DisplayOn(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
-void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
-void     XGI_SetCRT1Group(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
-void     XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo);
-void	 XGI_UpdateXG21CRTC(USHORT ModeNo, PVB_DEVICE_INFO pVBInfo, USHORT RefreshRateTableIndex);
-void     XGI_WaitDisply(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SenseCRT1(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetSeqRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetMiscRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRTCRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetATTRegs(USHORT ModeNo,USHORT StandTableIndex,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo );
-void     XGI_SetGRCRegs(USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo);
-
-void     XGI_SetSync(USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1CRTC(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
-void     XGI_SetCRT1Timing_H(PVB_DEVICE_INFO pVBInfo,PXGI_HW_DEVICE_INFO HwDeviceExtension);
-void     XGI_SetCRT1Timing_V(USHORT ModeIdIndex,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1DE(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1VCLK(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1FIFO(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1ModeRegs(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetVCLKState(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo);
-
-void     XGI_LoadDAC(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo);
-void     XGI_WriteDAC(USHORT dl, USHORT ah, USHORT al, USHORT dh, PVB_DEVICE_INFO pVBInfo);
-/*void     XGI_ClearBuffer(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,PVB_DEVICE_INFO pVBInfo);*/
-void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetLVDSResInfo( USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetLVDSData(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_ModCRT1Regs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_SetLVDSRegs(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_UpdateModeInfo(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo);
-void     XGI_SetCRT2ECLK( USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PVB_DEVICE_INFO  pVBInfo);
-void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetLCDSync(USHORT* HSyncWidth, USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo);
-void 	 XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void  	 XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT2VCLK(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_OEM310Setting(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetDelayComp(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetLCDCap(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo);
-void     SetSpectrum(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetAntiFlicker(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetEdgeEnhance(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetPhaseIncr(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetYFilter(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo );
-void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo );
-void     XGI_CloseCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
-void     XGI_OpenCRTC(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetRAMDAC2DATA(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
-void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO pVBInfo);
-void     XGINew_EnableCRT2(PVB_DEVICE_INFO pVBInfo);
-void     XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo);
-void     XGI_LongWait(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetCRT1Offset( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo );
-void     XGI_GetLCDVCLKPtr(UCHAR* di_0,UCHAR *di_1, PVB_DEVICE_INFO pVBInfo);
-UCHAR    XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
-void     XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetLCDCapPtr(PVB_DEVICE_INFO pVBInfo);
-USHORT   XGI_GetLCDCapPtr1(PVB_DEVICE_INFO pVBInfo);
-XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
-void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
-UCHAR    XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo);
-UCHAR    XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo);
-void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
-void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
-void     XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
-UCHAR    XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo );
-
-extern   void 	  ReadVBIOSTablData( UCHAR ChipType , PVB_DEVICE_INFO pVBInfo);
-#ifdef WIN2000
-/* [Billy] 2007/05/17 For CH7007 */
-extern  UCHAR CH7007TVReg_UNTSC[][8],CH7007TVReg_ONTSC[][8],CH7007TVReg_UPAL[][8],CH7007TVReg_OPAL[][8];
-extern  UCHAR CH7007TVCRT1UNTSC_H[][10],CH7007TVCRT1ONTSC_H[][10],CH7007TVCRT1UPAL_H[][10],CH7007TVCRT1OPAL_H[][10] ;
-extern  UCHAR CH7007TVCRT1UNTSC_V[][10],CH7007TVCRT1ONTSC_V[][10],CH7007TVCRT1UPAL_V[][10],CH7007TVCRT1OPAL_V[][10] ;
-extern  UCHAR XGI7007_CHTVVCLKUNTSC[],XGI7007_CHTVVCLKONTSC[],XGI7007_CHTVVCLKUPAL[],XGI7007_CHTVVCLKOPAL[];
-
-extern  BOOLEAN XGI_XG21CheckCH7007TVMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo ) ;
-extern  void SetCH7007Regs(PXGI_HW_DEVICE_INFO HwDeviceExtension, USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo ) ;
-extern  VP_STATUS TurnOnCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
-extern  VP_STATUS TurnOffCH7007(PHW_DEVICE_EXTENSION pHWDE) ;
-extern  BOOLEAN IsCH7007TVMode(PVB_DEVICE_INFO pVBInfo) ;
-#endif
-
-/* USHORT XGINew_flag_clearbuffer; 0: no clear frame buffer 1:clear frame buffer */
-
-
-
-
-
-USHORT XGINew_MDA_DAC[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
-               0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-               0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15,
-               0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F};
-
-USHORT XGINew_CGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-               0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
-
-USHORT XGINew_EGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15,
-               0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35,
-               0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D,
-               0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D,
-               0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17,
-               0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37,
-               0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F};
-
-USHORT XGINew_VGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
-               0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F,
-               0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18,
-               0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F,
-
-               0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F,
-               0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00,
-               0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18,
-               0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04,
-               0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10,
-               0x0B,0x0C,0x0D,0x0F,0x10};
+unsigned char  XGI_IsLCDDualLink(struct vb_device_info *pVBInfo);
+unsigned char  XGI_SetCRT2Group301(unsigned short ModeNo,
+			     struct xgi_hw_device_info *HwDeviceExtension,
+			     struct vb_device_info *pVBInfo);
+unsigned char  XGI_BacklightByDrv(struct vb_device_info *pVBInfo);
+
+unsigned char  XGI_IsLCDON(struct vb_device_info *pVBInfo);
+unsigned char  XGI_DisableChISLCD(struct vb_device_info *pVBInfo);
+unsigned char  XGI_EnableChISLCD(struct vb_device_info *pVBInfo);
+unsigned char  XGI_AjustCRT2Rate(unsigned short ModeNo,
+			   unsigned short ModeIdIndex,
+			   unsigned short RefreshRateTableIndex,
+			   unsigned short *i, struct vb_device_info *pVBInfo);
+unsigned char  XGI_SearchModeID(unsigned short ModeNo,
+			  unsigned short *ModeIdIndex,
+			  struct vb_device_info *pVBInfo);
+unsigned char  XGI_GetLCDInfo(unsigned short ModeNo,
+			unsigned short ModeIdIndex,
+			struct vb_device_info *pVBInfo);
+unsigned char  XGISetModeNew(struct xgi_hw_device_info *HwDeviceExtension,
+		       unsigned short ModeNo);
+unsigned char  XGI_BridgeIsOn(struct vb_device_info *pVBInfo);
+unsigned char    XGI_GetModePtr(unsigned short ModeNo,
+			unsigned short ModeIdIndex,
+			struct vb_device_info *pVBInfo);
+unsigned short XGI_GetOffset(unsigned short ModeNo,
+			     unsigned short ModeIdIndex,
+			     unsigned short RefreshRateTableIndex,
+			     struct xgi_hw_device_info *HwDeviceExtension,
+			     struct vb_device_info *pVBInfo);
+unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
+				  unsigned short ModeNo,
+				  unsigned short ModeIdIndex,
+				  struct vb_device_info *pVBInfo);
+unsigned short XGI_GetResInfo(unsigned short ModeNo,
+			      unsigned short ModeIdIndex,
+			      struct vb_device_info *pVBInfo);
+unsigned short XGI_GetColorDepth(unsigned short ModeNo,
+				 unsigned short ModeIdIndex,
+				 struct vb_device_info *pVBInfo);
+unsigned short XGI_GetVGAHT2(struct vb_device_info *pVBInfo);
+unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
+			       unsigned short ModeIdIndex,
+			       unsigned short RefreshRateTableIndex,
+			       struct xgi_hw_device_info *HwDeviceExtension,
+			       struct vb_device_info *pVBInfo);
+void     XGI_VBLongWait(struct vb_device_info *pVBInfo);
+void     XGI_SaveCRT2Info(unsigned short ModeNo, struct vb_device_info *pVBInfo);
+void     XGI_GetCRT2Data(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_GetCRT2ResInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_PreSetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetGroup2(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_SetGroup3(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetGroup4(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_SetGroup5(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     *XGI_GetLcdPtr(unsigned short BX,  unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     *XGI_GetTVPtr(unsigned short BX, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_FirePWDEnable(struct vb_device_info *pVBInfo);
+void     XGI_EnableGatingCRT(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_DisableGatingCRT(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_SetPanelDelay(unsigned short tempbl, struct vb_device_info *pVBInfo);
+void     XGI_SetPanelPower(unsigned short tempah, unsigned short tempbl, struct vb_device_info *pVBInfo);
+void     XGI_EnablePWD(struct vb_device_info *pVBInfo);
+void     XGI_DisablePWD(struct vb_device_info *pVBInfo);
+void     XGI_AutoThreshold(struct vb_device_info *pVBInfo);
+void     XGI_SetTap4Regs(struct vb_device_info *pVBInfo);
+
+void     XGI_DisplayOn(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_DisplayOff(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1Group(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetXG21CRTC(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetXG21LCD(struct vb_device_info *pVBInfo, unsigned short RefreshRateTableIndex, unsigned short ModeNo);
+void     XGI_SetXG27CRTC(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetXG27LCD(struct vb_device_info *pVBInfo, unsigned short RefreshRateTableIndex, unsigned short ModeNo);
+void	 XGI_UpdateXG21CRTC(unsigned short ModeNo, struct vb_device_info *pVBInfo, unsigned short RefreshRateTableIndex);
+void     XGI_WaitDisply(struct vb_device_info *pVBInfo);
+void     XGI_SenseCRT1(struct vb_device_info *pVBInfo);
+void     XGI_SetSeqRegs(unsigned short ModeNo, unsigned short StandTableIndex, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetMiscRegs(unsigned short StandTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension, unsigned short StandTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetATTRegs(unsigned short ModeNo, unsigned short StandTableIndex, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetGRCRegs(unsigned short StandTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_ClearExt1Regs(struct vb_device_info *pVBInfo);
+
+void     XGI_SetSync(unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1CRTC(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo, struct xgi_hw_device_info *HwDeviceExtension);
+void     XGI_SetCRT1Timing_H(struct vb_device_info *pVBInfo, struct xgi_hw_device_info *HwDeviceExtension);
+void     XGI_SetCRT1Timing_V(unsigned short ModeIdIndex, unsigned short ModeNo, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1VCLK(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1FIFO(unsigned short ModeNo, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetVCLKState(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+
+void     XGI_LoadDAC(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_WriteDAC(unsigned short dl, unsigned short ah, unsigned short al, unsigned short dh, struct vb_device_info *pVBInfo);
+/*void     XGI_ClearBuffer(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, struct vb_device_info *pVBInfo);*/
+void     XGI_SetLCDAGroup(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_GetLVDSResInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
+			    struct vb_device_info *pVBInfo);
+void     XGI_GetLVDSData(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_ModCRT1Regs(unsigned short ModeNo, unsigned short ModeIdIndex,
+			 unsigned short RefreshRateTableIndex,
+			 struct xgi_hw_device_info *HwDeviceExtension,
+			 struct vb_device_info *pVBInfo);
+void     XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_UpdateModeInfo(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_GetVGAType(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_GetVBType(struct vb_device_info *pVBInfo);
+void     XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT2ECLK(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     InitTo330Pointer(unsigned char, struct vb_device_info *pVBInfo);
+void     XGI_GetLCDSync(unsigned short *HSyncWidth, unsigned short *VSyncWidth, struct vb_device_info *pVBInfo);
+void     XGI_DisableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_EnableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_SetCRT2VCLK(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_OEM310Setting(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetDelayComp(struct vb_device_info *pVBInfo);
+void     XGI_SetLCDCap(struct vb_device_info *pVBInfo);
+void     XGI_SetLCDCap_A(unsigned short tempcx, struct vb_device_info *pVBInfo);
+void     XGI_SetLCDCap_B(unsigned short tempcx, struct vb_device_info *pVBInfo);
+void     SetSpectrum(struct vb_device_info *pVBInfo);
+void     XGI_SetAntiFlicker(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetEdgeEnhance(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetPhaseIncr(struct vb_device_info *pVBInfo);
+void     XGI_SetYFilter(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_GetTVPtrIndex2(unsigned short *tempbx, unsigned char* tempcl,
+			    unsigned char *tempch, struct vb_device_info *pVBInfo);
+unsigned short   XGI_GetTVPtrIndex(struct vb_device_info *pVBInfo);
+void     XGI_SetCRT2ModeRegs(unsigned short ModeNo, struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_CloseCRTC(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_OpenCRTC(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_GetRAMDAC2DATA(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo);
+void     XGI_UnLockCRT2(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGI_LockCRT2(struct xgi_hw_device_info *, struct vb_device_info *pVBInfo);
+void     XGINew_EnableCRT2(struct vb_device_info *pVBInfo);
+void     XGINew_LCD_Wait_Time(unsigned char DelayTime, struct vb_device_info *pVBInfo);
+void     XGI_LongWait(struct vb_device_info *pVBInfo);
+void     XGI_SetCRT1Offset(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo);
+void     XGI_GetLCDVCLKPtr(unsigned char *di_0, unsigned char *di_1,
+			   struct vb_device_info *pVBInfo);
+unsigned char    XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
+				unsigned short ModeNo,
+				unsigned short ModeIdIndex,
+				struct vb_device_info *pVBInfo);
+void     XGI_GetVCLKLen(unsigned char tempal, unsigned char *di_0,
+			unsigned char *di_1, struct vb_device_info *pVBInfo);
+unsigned short   XGI_GetLCDCapPtr(struct vb_device_info *pVBInfo);
+unsigned short   XGI_GetLCDCapPtr1(struct vb_device_info *pVBInfo);
+struct XGI301C_Tap4TimingStruct *XGI_GetTap4Ptr(unsigned short tempcx, struct vb_device_info *pVBInfo);
+void     XGI_SetXG21FPBits(struct vb_device_info *pVBInfo);
+void     XGI_SetXG27FPBits(struct vb_device_info *pVBInfo);
+unsigned char    XGI_XG21GetPSCValue(struct vb_device_info *pVBInfo);
+unsigned char    XGI_XG27GetPSCValue(struct vb_device_info *pVBInfo);
+void     XGI_XG21BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo);
+void     XGI_XG27BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo);
+void     XGI_XG21SetPanelDelay(unsigned short tempbl, struct vb_device_info *pVBInfo);
+unsigned char  XGI_XG21CheckLVDSMode(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetXG21LVDSPara(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+void     XGI_SetXG27LVDSPara(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+unsigned char  XGI_SetDefaultVCLK(struct vb_device_info *pVBInfo);
+
+extern void ReadVBIOSTablData(unsigned char ChipType, struct vb_device_info *pVBInfo);
+
+/* unsigned short XGINew_flag_clearbuffer; 0: no clear frame buffer 1:clear frame buffer */
+
+
+unsigned short XGINew_MDA_DAC[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15,
+	0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F};
+
+unsigned short XGINew_CGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
+
+unsigned short XGINew_EGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x05, 0x15,
+	0x20, 0x30, 0x24, 0x34, 0x21, 0x31, 0x25, 0x35,
+	0x08, 0x18, 0x0C, 0x1C, 0x09, 0x19, 0x0D, 0x1D,
+	0x28, 0x38, 0x2C, 0x3C, 0x29, 0x39, 0x2D, 0x3D,
+	0x02, 0x12, 0x06, 0x16, 0x03, 0x13, 0x07, 0x17,
+	0x22, 0x32, 0x26, 0x36, 0x23, 0x33, 0x27, 0x37,
+	0x0A, 0x1A, 0x0E, 0x1E, 0x0B, 0x1B, 0x0F, 0x1F,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F};
+
+unsigned short XGINew_VGA_DAC[] = {
+	0x00, 0x10, 0x04, 0x14, 0x01, 0x11, 0x09, 0x15,
+	0x2A, 0x3A, 0x2E, 0x3E, 0x2B, 0x3B, 0x2F, 0x3F,
+	0x00, 0x05, 0x08, 0x0B, 0x0E, 0x11, 0x14, 0x18,
+	0x1C, 0x20, 0x24, 0x28, 0x2D, 0x32, 0x38, 0x3F,
+	0x00, 0x10, 0x1F, 0x2F, 0x3F, 0x1F, 0x27, 0x2F,
+	0x37, 0x3F, 0x2D, 0x31, 0x36, 0x3A, 0x3F, 0x00,
+	0x07, 0x0E, 0x15, 0x1C, 0x0E, 0x11, 0x15, 0x18,
+	0x1C, 0x14, 0x16, 0x18, 0x1A, 0x1C, 0x00, 0x04,
+	0x08, 0x0C, 0x10, 0x08, 0x0A, 0x0C, 0x0E, 0x10,
+	0x0B, 0x0C, 0x0D, 0x0F, 0x10};
 
 
 /* --------------------------------------------------------------------- */
@@ -250,35 +240,35 @@ USHORT XGINew_VGA_DAC[]={0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
+void InitTo330Pointer(unsigned char ChipType, struct vb_device_info *pVBInfo)
 {
-    pVBInfo->SModeIDTable = (XGI_StStruct *) XGI330_SModeIDTable ;
-    pVBInfo->StandTable = (XGI_StandTableStruct *) XGI330_StandTable ;
-    pVBInfo->EModeIDTable = (XGI_ExtStruct *) XGI330_EModeIDTable ;
-    pVBInfo->RefIndex = (XGI_Ext2Struct *) XGI330_RefIndex ;
-    pVBInfo->XGINEWUB_CRT1Table = (XGI_CRT1TableStruct *) XGI_CRT1Table ;
+    pVBInfo->SModeIDTable = (struct XGI_StStruct *) XGI330_SModeIDTable ;
+    pVBInfo->StandTable = (struct XGI_StandTableStruct *) XGI330_StandTable ;
+    pVBInfo->EModeIDTable = (struct XGI_ExtStruct *) XGI330_EModeIDTable ;
+    pVBInfo->RefIndex = (struct XGI_Ext2Struct *) XGI330_RefIndex ;
+    pVBInfo->XGINEWUB_CRT1Table = (struct XGI_CRT1TableStruct *) XGI_CRT1Table ;
 
     /* add for new UNIVGABIOS */
-    /* XGINew_UBLCDDataTable = (XGI_LCDDataTablStruct *) XGI_LCDDataTable ; */
+    /* XGINew_UBLCDDataTable = (struct XGI_LCDDataTablStruct *) XGI_LCDDataTable ; */
     /* XGINew_UBTVDataTable = (XGI_TVDataTablStruct *) XGI_TVDataTable ; */
 
 
     if ( ChipType >= XG40 )
     {
-        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI340New_MCLKData ;
-        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI340_ECLKData ;
+	pVBInfo->MCLKData = (struct XGI_MCLKDataStruct *) XGI340New_MCLKData;
+	pVBInfo->ECLKData = (struct XGI_ECLKDataStruct *) XGI340_ECLKData;
     }
     else
     {
-        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI330New_MCLKData ;
-        pVBInfo->ECLKData = (XGI_ECLKDataStruct *) XGI330_ECLKData ;
+	pVBInfo->MCLKData = (struct XGI_MCLKDataStruct *) XGI330New_MCLKData;
+	pVBInfo->ECLKData = (struct XGI_ECLKDataStruct *) XGI330_ECLKData;
     }
 
-    pVBInfo->VCLKData = (XGI_VCLKDataStruct *) XGI_VCLKData ;
-    pVBInfo->VBVCLKData = (XGI_VBVCLKDataStruct *) XGI_VBVCLKData ;
+    pVBInfo->VCLKData = (struct XGI_VCLKDataStruct *) XGI_VCLKData ;
+    pVBInfo->VBVCLKData = (struct XGI_VBVCLKDataStruct *) XGI_VBVCLKData ;
     pVBInfo->ScreenOffset = XGI330_ScreenOffset ;
-    pVBInfo->StResInfo = (XGI_StResInfoStruct *) XGI330_StResInfo ;
-    pVBInfo->ModeResInfo = (XGI_ModeResInfoStruct *) XGI330_ModeResInfo ;
+    pVBInfo->StResInfo = (struct XGI_StResInfoStruct *) XGI330_StResInfo ;
+    pVBInfo->ModeResInfo = (struct XGI_ModeResInfoStruct *) XGI330_ModeResInfo ;
 
     pVBInfo->pOutputSelect = &XGI330_OutputSelect ;
     pVBInfo->pSoftSetting = &XGI330_SoftSetting ;
@@ -342,9 +332,9 @@ void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
     pVBInfo->Ren750pGroup3 = XGI330_Ren750pGroup3 ;
 
 
-    pVBInfo->TimingH = (XGI_TimingHStruct *) XGI_TimingH ;
-    pVBInfo->TimingV = (XGI_TimingVStruct *) XGI_TimingV ;
-    pVBInfo->UpdateCRT1 = (XGI_XG21CRT1Struct *) XGI_UpdateCRT1Table ;
+    pVBInfo->TimingH = (struct XGI_TimingHStruct *) XGI_TimingH ;
+    pVBInfo->TimingV = (struct XGI_TimingVStruct *) XGI_TimingV ;
+    pVBInfo->UpdateCRT1 = (struct XGI_XG21CRT1Struct *) XGI_UpdateCRT1Table ;
 
     pVBInfo->CHTVVCLKUNTSC = XGI330_CHTVVCLKUNTSC ;
     pVBInfo->CHTVVCLKONTSC = XGI330_CHTVVCLKONTSC ;
@@ -371,7 +361,7 @@ void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
 
     if ( ChipType == XG27 )
     {
-        pVBInfo->MCLKData = (XGI_MCLKDataStruct *) XGI27New_MCLKData ;
+	pVBInfo->MCLKData = (struct XGI_MCLKDataStruct *) XGI27New_MCLKData;
         pVBInfo->CR40 = XGI27_cr41 ;
     	pVBInfo->pXGINew_CR97 = &XG27_CR97 ;
     	pVBInfo->pSR36 = &XG27_SR36 ;
@@ -405,14 +395,15 @@ void InitTo330Pointer( UCHAR ChipType ,PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
+unsigned char XGISetModeNew(struct xgi_hw_device_info *HwDeviceExtension,
+			    unsigned short ModeNo)
 {
-    USHORT ModeIdIndex ;
-        /* PUCHAR pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ; */
-    VB_DEVICE_INFO VBINF;
-    PVB_DEVICE_INFO pVBInfo = &VBINF;
+    unsigned short ModeIdIndex ;
+        /* unsigned char *pVBInfo->FBAddr = HwDeviceExtension->pjVideoMemoryAddress ; */
+    struct vb_device_info VBINF;
+    struct vb_device_info *pVBInfo = &VBINF;
     pVBInfo->ROMAddr = HwDeviceExtension->pjVirtualRomBase ;
-    pVBInfo->BaseAddr = (ULONG)HwDeviceExtension->pjIOAddress ;
+    pVBInfo->BaseAddr = (unsigned long)HwDeviceExtension->pjIOAddress ;
     pVBInfo->IF_DEF_LVDS = 0 ;
     pVBInfo->IF_DEF_CH7005 = 0 ;
     pVBInfo->IF_DEF_LCDA = 1 ;
@@ -485,9 +476,6 @@ BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
     XGI_GetVBType( pVBInfo ) ;
 
     InitTo330Pointer( HwDeviceExtension->jChipType, pVBInfo ) ;
-#ifdef WIN2000
-    ReadVBIOSTablData( HwDeviceExtension->jChipType , pVBInfo) ;
-#endif
     if ( ModeNo & 0x80 )
     {
         ModeNo = ModeNo & 0x7F ;
@@ -560,30 +548,9 @@ BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
     }	/* !XG20 */
     else
     {
-#ifdef WIN2000
-        if ( pVBInfo->IF_DEF_CH7007 == 1 )
-        {
-
-            VideoDebugPrint((0, "XGISetModeNew: pVBIfo->IF_DEF_CH7007==1\n"));
-            pVBInfo->VBType = VB_CH7007 ;
-            XGI_GetVBInfo(ModeNo , ModeIdIndex , HwDeviceExtension, pVBInfo ) ;
-            XGI_GetTVInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
-            XGI_GetLCDInfo(ModeNo , ModeIdIndex, pVBInfo ) ;
-            if( !(XGI_XG21CheckCH7007TVMode(ModeNo, ModeIdIndex, pVBInfo )) )
-            {
-              return FALSE;
-            }
-        }
-#endif
-
-
-        if ( pVBInfo->IF_DEF_LVDS == 1 )
-        {
-            if ( !XGI_XG21CheckLVDSMode(ModeNo , ModeIdIndex, pVBInfo) )
-            {
-              return FALSE;
-            }
-        }
+	    if (pVBInfo->IF_DEF_LVDS == 1)
+		    if (!XGI_XG21CheckLVDSMode(ModeNo , ModeIdIndex, pVBInfo))
+			    return 0;
 
         if ( ModeNo <= 0x13 )
         {
@@ -642,7 +609,7 @@ BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
     XGI_LockCRT2( HwDeviceExtension, pVBInfo ) ;
 }
 
-    return( TRUE ) ;
+    return 1;
 }
 
 
@@ -652,14 +619,16 @@ BOOLEAN XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1Group(struct xgi_hw_device_info *HwDeviceExtension,
+		      unsigned short ModeNo,
+		      unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT StandTableIndex ,
+    unsigned short StandTableIndex ,
            RefreshRateTableIndex ,
            b3CC ,
            temp ;
 
-    USHORT XGINew_P3cc =  pVBInfo->P3cc;
+    unsigned short XGINew_P3cc =  pVBInfo->P3cc;
 
     /* XGINew_CRT1Mode = ModeNo ; // SaveModeID */
     StandTableIndex = XGI_GetModePtr( ModeNo , ModeIdIndex, pVBInfo ) ;
@@ -710,14 +679,14 @@ void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , U
     	{
     	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x4E) ;
     	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE9) ;
-    	    b3CC =(UCHAR) XGINew_GetReg2(XGINew_P3cc) ;
+	    b3CC = (unsigned char) XGINew_GetReg2(XGINew_P3cc) ;
     	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
     	}
     	else if ( ( ModeNo == 0x04) | ( ModeNo == 0x05) | ( ModeNo == 0x0D) )
     	{
     	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B) ;
     	    XGINew_SetReg1( pVBInfo->P3c4 , 0x2C , 0xE3) ;
-    	    b3CC = (UCHAR)XGINew_GetReg2(XGINew_P3cc) ;
+	    b3CC = (unsigned char)XGINew_GetReg2(XGINew_P3cc) ;
     	    XGINew_SetReg3(XGINew_P3cc ,  (b3CC |= 0x0C) ) ;
     	}
     }
@@ -763,13 +732,6 @@ void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , U
 
     XGI_LoadDAC( ModeNo , ModeIdIndex, pVBInfo ) ;
     /* XGI_ClearBuffer( HwDeviceExtension , ModeNo, pVBInfo ) ; */
-#ifdef WIN2000
-   if ( pVBInfo->IF_DEF_CH7007 == 1 )  /* [Billy]  2007/05/14  */
-   {
-       VideoDebugPrint((0, "XGI_SetCRT1Group: VBInfo->IF_DEF_CH7007==1\n"));
-       SetCH7007Regs(HwDeviceExtension, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo ) ; /* 07/05/28 */
-   }
-#endif
 }
 
 
@@ -779,9 +741,10 @@ void XGI_SetCRT1Group( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , U
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_GetModePtr(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     struct vb_device_info *pVBInfo)
 {
-    UCHAR index ;
+    unsigned char index ;
 
     if ( ModeNo <= 0x13 )
         index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_StTableIndex ;
@@ -802,7 +765,7 @@ UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInf
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-/*UCHAR XGI_SetBIOSData( USHORT ModeNo , USHORT ModeIdIndex )
+/*unsigned char XGI_SetBIOSData(unsigned short ModeNo, unsigned short ModeIdIndex)
 {
     return( 0 ) ;
 }
@@ -814,7 +777,7 @@ UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInf
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-/*UCHAR XGI_ClearBankRegs( USHORT ModeNo , USHORT ModeIdIndex )
+/*unsigned char XGI_ClearBankRegs(unsigned short ModeNo, unsigned short ModeIdIndex)
 {
     return( 0 ) ;
 }
@@ -826,12 +789,13 @@ UCHAR XGI_GetModePtr( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInf
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetSeqRegs(  USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetSeqRegs(unsigned short ModeNo, unsigned short StandTableIndex,
+		    unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR tempah ,
+    unsigned char tempah ,
           SRdata ;
 
-    USHORT i ,
+    unsigned short i ,
            modeflag ;
 
     if ( ModeNo <= 0x13 )
@@ -873,9 +837,9 @@ void XGI_SetSeqRegs(  USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdInde
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetMiscRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetMiscRegs(unsigned short StandTableIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR Miscdata ;
+    unsigned char Miscdata ;
 
     Miscdata = pVBInfo->StandTable[ StandTableIndex ].MISC ;	/* Get Misc from file */
 /*
@@ -898,12 +862,13 @@ void XGI_SetMiscRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRTCRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRTCRegs(struct xgi_hw_device_info *HwDeviceExtension,
+		     unsigned short StandTableIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR CRTCdata ;
-    USHORT i ;
+    unsigned char CRTCdata ;
+    unsigned short i ;
 
-    CRTCdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    CRTCdata = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11);
     CRTCdata &= 0x7f ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , CRTCdata ) ;		/* Unlock CRTC */
 
@@ -933,11 +898,11 @@ void XGI_SetCRTCRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT StandTableI
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetATTRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetATTRegs(unsigned short ModeNo, unsigned short StandTableIndex,
+		    unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR ARdata ;
-    USHORT i ,
-           modeflag ;
+    unsigned char ARdata ;
+    unsigned short i, modeflag;
 
     if ( ModeNo <= 0x13 )
         modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;
@@ -983,10 +948,10 @@ void XGI_SetATTRegs( USHORT ModeNo , USHORT StandTableIndex , USHORT ModeIdIndex
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetGRCRegs(unsigned short StandTableIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR GRdata ;
-    USHORT i ;
+    unsigned char GRdata ;
+    unsigned short i ;
 
     for( i = 0 ; i <= 0x08 ; i++ )
     {
@@ -996,7 +961,7 @@ void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
 
     if ( pVBInfo->ModeType > ModeVGA )
     {
-        GRdata = ( UCHAR )XGINew_GetReg1( pVBInfo->P3ce , 0x05 ) ;
+	GRdata = (unsigned char)XGINew_GetReg1(pVBInfo->P3ce, 0x05);
         GRdata &= 0xBF ;						/* 256 color disable */
         XGINew_SetReg1( pVBInfo->P3ce , 0x05 , GRdata ) ;
     }
@@ -1009,9 +974,9 @@ void XGI_SetGRCRegs( USHORT StandTableIndex, PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo)
+void XGI_ClearExt1Regs(struct vb_device_info *pVBInfo)
 {
-    USHORT i ;
+    unsigned short i ;
 
     for( i = 0x0A ; i <= 0x0E ; i++ )
         XGINew_SetReg1( pVBInfo->P3c4 , i , 0x00 ) ;	/* Clear SR0A-SR0E */
@@ -1024,7 +989,7 @@ void XGI_ClearExt1Regs(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_SetDefaultVCLK(struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x31 , ~0x30 , 0x20 ) ;
@@ -1046,13 +1011,15 @@ UCHAR XGI_SetDefaultVCLK( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
+				  unsigned short ModeNo,
+				  unsigned short ModeIdIndex,
+				  struct vb_device_info *pVBInfo)
 {
-    SHORT  LCDRefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 } ,
+    short LCDRefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 } ,
            LCDARefreshIndex[] = { 0x00 , 0x00 , 0x03 , 0x01 , 0x01 , 0x01 , 0x01 } ;
 
-    USHORT RefreshRateTableIndex , i ,
-         modeflag , index , temp ;
+    unsigned short RefreshRateTableIndex, i, modeflag, index, temp;
 
     if ( ModeNo <= 0x13 )
     {
@@ -1183,13 +1150,11 @@ USHORT XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo , USHORT
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_AjustCRT2Rate( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , USHORT *i, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_AjustCRT2Rate(unsigned short ModeNo, unsigned short ModeIdIndex,
+				unsigned short RefreshRateTableIndex,
+				unsigned short *i, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
-           tempbx ,
-           resinfo ,
-           modeflag ,
-           infoflag ;
+    unsigned short tempax, tempbx, resinfo, modeflag, infoflag;
 
     if ( ModeNo <= 0x13 )
     {
@@ -1359,9 +1324,9 @@ BOOLEAN XGI_AjustCRT2Rate( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRa
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetSync(USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetSync(unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT sync ,
+    unsigned short sync ,
            temp ;
 
     sync = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_InfoFlag >> 8 ;	/* di+0x00 */
@@ -1378,17 +1343,18 @@ void XGI_SetSync(USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1CRTC( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGI_SetCRT1CRTC(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo,
+		     struct xgi_hw_device_info *HwDeviceExtension)
 {
-    UCHAR  index ,
-           data ;
-
-    USHORT i ;
+    unsigned char index, data;
+    unsigned short i;
 
     index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;	/* Get index */
     index = index&IndexMask ;
 
-    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11);
     data &= 0x7F ;
     XGINew_SetReg1(pVBInfo->P3d4,0x11,data);				/* Unlock CRTC */
 
@@ -1416,16 +1382,16 @@ void XGI_SetCRT1CRTC( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceExtension )
+void XGI_SetCRT1Timing_H(struct vb_device_info *pVBInfo, struct xgi_hw_device_info *HwDeviceExtension)
 {
-    UCHAR data , data1, pushax;
-    USHORT i , j ;
+    unsigned char data, data1, pushax;
+    unsigned short i, j;
 
     /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
     /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
     /* XGINew_SetRegANDOR( pVBInfo->P3d4 ,0x11 , 0x7f , 0x00 ) ; */
 
-    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;		/* unlock cr0-7 */
+    data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11); /* unlock cr0-7 */
     data &= 0x7F ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;
 
@@ -1435,16 +1401,16 @@ void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceE
     for( i = 0x01 ; i <= 0x04 ; i++ )
     {
         data = pVBInfo->TimingH[ 0 ].data[ i ] ;
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 1 ) , data ) ;
+	XGINew_SetReg1( pVBInfo->P3d4, (unsigned short)(i + 1), data);
     }
 
     for( i = 0x05 ; i <= 0x06 ; i++ )
     {
         data = pVBInfo->TimingH[ 0 ].data[ i ];
-        XGINew_SetReg1( pVBInfo->P3c4 ,( USHORT )( i + 6 ) , data ) ;
+	XGINew_SetReg1(pVBInfo->P3c4, (unsigned short)(i + 6), data);
     }
 
-    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+    j = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x0e);
     j &= 0x1F ;
     data = pVBInfo->TimingH[ 0 ].data[ 7 ] ;
     data &= 0xE0 ;
@@ -1453,17 +1419,17 @@ void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceE
 
     if ( HwDeviceExtension->jChipType >= XG20 )
     {
-    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x04 ) ;
+	data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x04);
     	data = data - 1 ;
     	XGINew_SetReg1( pVBInfo->P3d4 , 0x04 , data ) ;
-    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x05 ) ;
+	data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x05);
     	data1 = data ;
     	data1 &= 0xE0 ;
     	data &= 0x1F ;
     	if ( data == 0 )
     	{
     	    pushax = data ;
-    	    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0c ) ;
+	    data = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x0c);
     	    data &= 0xFB ;
     	    XGINew_SetReg1( pVBInfo->P3c4 , 0x0c , data ) ;
     	    data = pushax ;
@@ -1471,7 +1437,7 @@ void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceE
     	data = data - 1 ;
     	data |= data1 ;
     	XGINew_SetReg1( pVBInfo->P3d4 , 0x05 , data ) ;
-    	data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0e ) ;
+	data = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x0e);
     	data = data >> 5 ;
     	data = data + 3 ;
     	if ( data > 7 )
@@ -1488,10 +1454,12 @@ void XGI_SetCRT1Timing_H( PVB_DEVICE_INFO pVBInfo, PXGI_HW_DEVICE_INFO HwDeviceE
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1Timing_V(unsigned short ModeIdIndex,
+			 unsigned short ModeNo,
+			 struct vb_device_info *pVBInfo)
 {
-    UCHAR data ;
-    USHORT i , j ;
+    unsigned char data;
+    unsigned short i, j;
 
     /* XGINew_SetReg1( pVBInfo->P3d4 , 0x51 , 0 ) ; */
     /* XGINew_SetReg1( pVBInfo->P3d4 , 0x56 , 0 ) ; */
@@ -1500,22 +1468,22 @@ void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVB
     for( i = 0x00 ; i <= 0x01 ; i++ )
     {
         data = pVBInfo->TimingV[ 0 ].data[ i ] ;
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 6 ) , data ) ;
+	XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)(i + 6), data);
     }
 
     for( i = 0x02 ; i <= 0x03 ; i++ )
     {
         data = pVBInfo->TimingV[ 0 ].data[ i ] ;
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x0e ) , data ) ;
+	XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)(i + 0x0e), data);
     }
 
     for( i = 0x04 ; i <= 0x05 ; i++ )
     {
         data = pVBInfo->TimingV[ 0 ].data[ i ] ;
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 0x11 ) , data ) ;
+	XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)(i + 0x11), data);
     }
 
-    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x0a ) ;
+    j = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x0a);
     j &= 0xC0 ;
     data = pVBInfo->TimingV[ 0 ].data[ 6 ] ;
     data &= 0x3F ;
@@ -1535,7 +1503,7 @@ void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVB
     if ( i )
         data |= 0x80 ;
 
-    j = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x09 ) ;
+    j = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x09);
     j &= 0x5F ;
     data |= j ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x09 , data ) ;
@@ -1548,10 +1516,12 @@ void XGI_SetCRT1Timing_V( USHORT ModeIdIndex , USHORT ModeNo,PVB_DEVICE_INFO pVB
 /* Output : Fill CRT Hsync/Vsync to SR2E/SR2F/SR30/SR33/SR34/SR3F */
 /* Description : Set LCD timing */
 /* --------------------------------------------------------------------- */
-void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetXG21CRTC(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo)
 {
-  UCHAR StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
-  USHORT Temp1, Temp2, Temp3 ;
+  unsigned char StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
+  unsigned short Temp1, Temp2, Temp3;
 
   if ( ModeNo <= 0x13 )
   {
@@ -1580,7 +1550,7 @@ void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
     Tempdx |= Tempcx ;							/* Tempdx: VRS[8:1] */
     XGINew_SetReg1( pVBInfo->P3c4 , 0x34 , Tempdx ) ;    		/* SR34[7:0]: VRS[8:1] */
 
-    Temp1 = Tempcx << 1 ;						/* Temp1[8]: VRS[8] UCHAR -> USHORT */
+    Temp1 = Tempcx << 1 ;						/* Temp1[8]: VRS[8] unsigned char -> unsigned short */
     Temp1 |= Tempbx ;							/* Temp1[8:0]: VRS[8:0] */
     Tempax &= 0x80 ;							/* Tempax[7]: CR7[7] */
     Temp2 = Tempax << 2 ;						/* Temp2[9]: VRS[9] */
@@ -1594,11 +1564,11 @@ void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
     if ( Tempax < Temp3 )						/* VRE[3:0]<VRS[3:0] */
       Temp2 |= 0x10 ;							/* Temp2: VRE + 0x10 */
     Temp2 &= 0xFF ;							/* Temp2[7:0]: VRE[7:0] */
-    Tempax = (UCHAR)Temp2 ;						/* Tempax[7:0]: VRE[7:0] */
+    Tempax = (unsigned char)Temp2;					/* Tempax[7:0]: VRE[7:0] */
     Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
     Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
     Temp1 >>= 9 ;							/* [10:9]->[1:0] */
-    Tempbx = (UCHAR)Temp1 ;						/* Tempbx[1:0]: VRS[10:9] */
+    Tempbx = (unsigned char)Temp1;					/* Tempbx[1:0]: VRS[10:9] */
     Tempax |= Tempbx ;							/* VRE[5:0]VRS[10:9] */
     Tempax &= 0x7F ;
     XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
@@ -1632,7 +1602,7 @@ void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
       Temp2 |= 0x40 ;                                                   /* Temp2 + 0x40 */
 
     Temp2 &= 0xFF ;
-    Tempax = (UCHAR)Temp2 ;						/* Tempax: HRE[7:0] */
+    Tempax = (unsigned char)Temp2;					/* Tempax: HRE[7:0] */
     Tempax <<= 2 ;							/* Tempax[7:2]: HRE[5:0] */
     Tempdx >>= 6 ;							/* Tempdx[7:6]->[1:0] HRS[9:8] */
     Tempax |= Tempdx ;							/* HRE[5:0]HRS[9:8] */
@@ -1676,20 +1646,22 @@ void XGI_SetXG21CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
       Temp2 |= 0x20 ;							/* VRE + 0x20 */
 
     Temp2 &= 0xFF ;
-    Tempax = (UCHAR)Temp2 ;						/* Tempax: VRE[7:0] */
+    Tempax = (unsigned char)Temp2;					/* Tempax: VRE[7:0] */
     Tempax <<= 2 ;							/* Tempax[7:0]; VRE[5:0]00 */
     Temp1 &= 0x600 ;							/* Temp1[10:9]: VRS[10:9] */
     Temp1 >>= 9 ;  							/* Temp1[1:0]: VRS[10:9] */
-    Tempbx = (UCHAR)Temp1 ;
+    Tempbx = (unsigned char)Temp1;
     Tempax |= Tempbx ;							/* Tempax[7:0]: VRE[5:0]VRS[10:9] */
     Tempax &= 0x7F ;
     XGINew_SetReg1( pVBInfo->P3c4 , 0x3F , Tempax ) ;   		/* SR3F D[7:2]->VRE D[1:0]->VRS */
   }
 }
 
-void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetXG27CRTC(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo)
 {
-  USHORT StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx ;
+	unsigned short StandTableIndex, index, Tempax, Tempbx, Tempcx, Tempdx;
 
   if ( ModeNo <= 0x13 )
   {
@@ -1726,7 +1698,7 @@ void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
     Tempbx |= Tempax ;							/* Tempbx[9:0]: VRE[9:0] */
     if ( Tempax <= (Tempcx & 0x0F) )					/* VRE[3:0]<=VRS[3:0] */
       Tempbx |= 0x10 ;							/* Tempbx: VRE + 0x10 */
-    Tempax = (UCHAR)Tempbx & 0xFF;					/* Tempax[7:0]: VRE[7:0] */
+    Tempax = (unsigned char)Tempbx & 0xFF;				/* Tempax[7:0]: VRE[7:0] */
     Tempax <<= 2 ;							/* Tempax << 2: VRE[5:0] */
     Tempcx = (Tempcx&0x600)>>8;                                         /* Tempcx VRS[10:9] */
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x3F , ~0xFC, Tempax ) ;        /* SR3F D[7:2]->VRE D[5:0] */
@@ -1810,10 +1782,12 @@ void XGI_SetXG27CRTC(USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableI
 /* Output : FCLK duty cycle, FCLK delay compensation */
 /* Description : All values set zero */
 /* --------------------------------------------------------------------- */
-void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+void XGI_SetXG21LCD(struct vb_device_info *pVBInfo,
+		    unsigned short RefreshRateTableIndex,
+		    unsigned short ModeNo)
 {
-  USHORT Data , Temp , b3CC ;
-  USHORT XGI_P3cc ;
+	unsigned short Data, Temp, b3CC;
+	unsigned short XGI_P3cc;
 
   XGI_P3cc = pVBInfo->P3cc ;
 
@@ -1844,7 +1818,7 @@ void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT
 
   if ( ModeNo <= 0x13 )
   {
-    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    b3CC = (unsigned char) XGINew_GetReg2(XGI_P3cc);
     if ( b3CC & 0x40 )
       XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
     if ( b3CC & 0x80 )
@@ -1860,10 +1834,12 @@ void XGI_SetXG21LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT
   }
 }
 
-void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT ModeNo)
+void XGI_SetXG27LCD(struct vb_device_info *pVBInfo,
+		    unsigned short RefreshRateTableIndex,
+		    unsigned short ModeNo)
 {
-  USHORT Data , Temp , b3CC ;
-  USHORT XGI_P3cc ;
+  unsigned short Data , Temp , b3CC ;
+  unsigned short XGI_P3cc ;
 
   XGI_P3cc = pVBInfo->P3cc ;
 
@@ -1896,7 +1872,7 @@ void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT
 
   if ( ModeNo <= 0x13 )
   {
-    b3CC = (UCHAR) XGINew_GetReg2( XGI_P3cc ) ;
+    b3CC = (unsigned char) XGINew_GetReg2(XGI_P3cc);
     if ( b3CC & 0x40 )
       XGINew_SetRegOR( pVBInfo->P3c4 , 0x30 , 0x20 ) ; /* Hsync polarity */
     if ( b3CC & 0x80 )
@@ -1918,7 +1894,9 @@ void XGI_SetXG27LCD(PVB_DEVICE_INFO pVBInfo,USHORT RefreshRateTableIndex,USHORT
 /* Output : CRT1 CRTC */
 /* Description : Modify CRT1 Hsync/Vsync to fix LCD mode timing */
 /* --------------------------------------------------------------------- */
-void XGI_UpdateXG21CRTC( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo , USHORT RefreshRateTableIndex )
+void XGI_UpdateXG21CRTC(unsigned short ModeNo,
+			struct vb_device_info *pVBInfo,
+			unsigned short RefreshRateTableIndex)
 {
   int i , index = -1;
 
@@ -1961,16 +1939,15 @@ void XGI_UpdateXG21CRTC( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo , USHORT Refres
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1DE(struct xgi_hw_device_info *HwDeviceExtension,
+		   unsigned short ModeNo,
+		   unsigned short ModeIdIndex,
+		   unsigned short RefreshRateTableIndex,
+		   struct vb_device_info *pVBInfo)
 {
-    USHORT resindex ,
-           tempax ,
-           tempbx ,
-           tempcx ,
-           temp ,
-           modeflag ;
+	unsigned short resindex, tempax, tempbx, tempcx, temp, modeflag;
 
-    UCHAR data ;
+    unsigned char data;
 
     resindex = XGI_GetResInfo( ModeNo , ModeIdIndex, pVBInfo ) ;
 
@@ -2013,13 +1990,13 @@ void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT
     tempax -= 1 ;
     tempbx -= 1 ;
     tempcx = tempax ;
-    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
-    data = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    temp = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11);
+    data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11);
     data &= 0x7F ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , data ) ;		/* Unlock CRTC */
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x01 , ( USHORT )( tempcx & 0xff ) ) ;
-    XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x0b , ~0x0c , ( USHORT )( ( tempcx & 0x0ff00 ) >> 10 ) ) ;
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x12 , ( USHORT )( tempbx & 0xff ) ) ;
+    XGINew_SetReg1(pVBInfo->P3d4, 0x01, (unsigned short)(tempcx & 0xff));
+    XGINew_SetRegANDOR(pVBInfo->P3d4, 0x0b, ~0x0c, (unsigned short)((tempcx & 0x0ff00) >> 10));
+    XGINew_SetReg1(pVBInfo->P3d4, 0x12, (unsigned short)(tempbx & 0xff));
     tempax = 0 ;
     tempbx = tempbx >> 8 ;
 
@@ -2030,7 +2007,7 @@ void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT
         tempax |= 0x40 ;
 
     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x07 , ~0x42 , tempax ) ;
-    data =( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x07 ) ;
+    data = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x07);
     data &= 0xFF ;
     tempax = 0 ;
 
@@ -2048,9 +2025,11 @@ void XGI_SetCRT1DE( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo,USHORT
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT 	XGI_GetResInfo(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetResInfo(unsigned short ModeNo,
+			      unsigned short ModeIdIndex,
+			      struct vb_device_info *pVBInfo)
 {
-    USHORT resindex ;
+	unsigned short resindex;
 
     if ( ModeNo <= 0x13 )
     {
@@ -2070,9 +2049,13 @@ USHORT 	XGI_GetResInfo(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBIn
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1Offset(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1Offset(unsigned short ModeNo,
+		       unsigned short ModeIdIndex,
+		       unsigned short RefreshRateTableIndex,
+		       struct xgi_hw_device_info *HwDeviceExtension,
+		       struct vb_device_info *pVBInfo)
 {
-    USHORT temp ,
+    unsigned short temp ,
            ah ,
            al ,
            temp2 ,
@@ -2131,7 +2114,7 @@ void XGI_SetCRT1Offset(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRate
     i |= temp ;
     XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , i ) ;
 
-    temp =( UCHAR )temp2 ;
+    temp = (unsigned char)temp2;
     temp &= 0xFF ;		/* al */
     XGINew_SetReg1( pVBInfo->P3d4 , 0x13 , temp ) ;
 
@@ -2163,11 +2146,13 @@ void XGI_SetCRT1Offset(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRate
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1VCLK( USHORT ModeNo , USHORT ModeIdIndex ,
-                        PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1VCLK(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     struct xgi_hw_device_info *HwDeviceExtension,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo)
 {
-    UCHAR index , data ;
-    USHORT vclkindex ;
+	unsigned char index, data;
+    unsigned short vclkindex ;
 
     if ( pVBInfo->IF_DEF_LVDS == 1 )
     {
@@ -2224,9 +2209,11 @@ void XGI_SetCRT1VCLK( USHORT ModeNo , USHORT ModeIdIndex ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1FIFO( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1FIFO(unsigned short ModeNo,
+		     struct xgi_hw_device_info *HwDeviceExtension,
+		     struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
+    unsigned short data ;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x3D ) ;
     data &= 0xfe ;
@@ -2273,10 +2260,12 @@ void XGI_SetCRT1FIFO( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT1ModeRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
-                            USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT1ModeRegs(struct xgi_hw_device_info *HwDeviceExtension,
+			 unsigned short ModeNo, unsigned short ModeIdIndex,
+			 unsigned short RefreshRateTableIndex,
+			 struct vb_device_info *pVBInfo)
 {
-    USHORT data ,
+    unsigned short data ,
            data2 ,
            data3 ,
            infoflag = 0 ,
@@ -2411,13 +2400,16 @@ void XGI_SetCRT1ModeRegs( PXGI_HW_DEVICE_INFO HwDeviceExtension ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetVCLKState(  PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo , USHORT RefreshRateTableIndex,PVB_DEVICE_INFO pVBInfo )
+void XGI_SetVCLKState(struct xgi_hw_device_info *HwDeviceExtension,
+		      unsigned short ModeNo,
+		      unsigned short RefreshRateTableIndex,
+		      struct vb_device_info *pVBInfo)
 {
-    USHORT data ,
+    unsigned short data ,
            data2 = 0 ;
-    SHORT  VCLK ;
+    short VCLK ;
 
-    UCHAR  index ;
+    unsigned char index;
 
     if ( ModeNo <= 0x13 )
         VCLK = 0 ;
@@ -2475,9 +2467,9 @@ void XGI_SetVCLKState(  PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-/*void XGI_VesaLowResolution( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO pVBInfo)
+/*void XGI_VesaLowResolution(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT modeflag;
+    unsigned short modeflag;
 
     if ( ModeNo > 0x13 )
         modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
@@ -2518,9 +2510,11 @@ void XGI_SetVCLKState(  PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_LoadDAC( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
+void XGI_LoadDAC(unsigned short ModeNo,
+		 unsigned short ModeIdIndex,
+		 struct vb_device_info *pVBInfo)
 {
-    USHORT data , data2 , time ,
+    unsigned short data , data2 , time ,
            i  , j , k , m , n , o ,
            si , di , bx , dl , al , ah , dh ,
            *table = NULL ;
@@ -2627,9 +2621,11 @@ void XGI_LoadDAC( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_WriteDAC( USHORT dl , USHORT ah , USHORT al , USHORT dh,PVB_DEVICE_INFO pVBInfo )
+void XGI_WriteDAC(unsigned short dl, unsigned short ah,
+		  unsigned short al, unsigned short dh,
+		  struct vb_device_info *pVBInfo)
 {
-    USHORT temp , bh , bl ;
+    unsigned short temp , bh , bl ;
 
     bh = ah ;
     bl = al ;
@@ -2652,70 +2648,24 @@ void XGI_WriteDAC( USHORT dl , USHORT ah , USHORT al , USHORT dh,PVB_DEVICE_INFO
             bh = temp ;
         }
     }
-    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )dh ) ;
-    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bh ) ;
-    XGINew_SetReg3( pVBInfo->P3c9 , ( USHORT )bl ) ;
+    XGINew_SetReg3(pVBInfo->P3c9, (unsigned short)dh);
+    XGINew_SetReg3(pVBInfo->P3c9, (unsigned short)bh);
+    XGINew_SetReg3(pVBInfo->P3c9, (unsigned short)bl);
 }
 
-#if 0
-/* --------------------------------------------------------------------- */
-/* Function : XGI_ClearBuffer */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-void XGI_ClearBuffer( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo, PVB_DEVICE_INFO  pVBInfo)
-{
-    PVOID VideoMemoryAddress = ( PVOID )HwDeviceExtension->pjVideoMemoryAddress ;
-    ULONG AdapterMemorySize  = ( ULONG )HwDeviceExtension->ulVideoMemorySize ;
-    PUSHORT pBuffer ;
-#ifndef LINUX_XF86
-    int i ;
-#endif
-
-    if ( pVBInfo->ModeType >= ModeEGA )
-    {
-        if ( ModeNo > 0x13 )
-        {
-            AdapterMemorySize = 0x40000 ;	/* clear 256k */
-            /* GetDRAMSize( HwDeviceExtension ) ; */
-            XGI_SetMemory( VideoMemoryAddress , AdapterMemorySize , 0 ) ;
-        }
-        else
-        {
-/*
-            pBuffer = VideoMemoryAddress ;
-            for( i = 0 ; i < 0x4000 ; i++ )
-                pBuffer[ i ] = 0x0000 ;
-*/
-        }
-    }
-    else
-    {
-        pBuffer = VideoMemoryAddress ;
-        if ( pVBInfo->ModeType < ModeCGA )
-        {
-/*
-            for ( i = 0 ; i < 0x4000 ; i++ )
-                pBuffer[ i ] = 0x0720 ;
-*/
-        }
-        else
-            XGI_SetMemory( VideoMemoryAddress , 0x8000 , 0 ) ;
-    }
-}
-
-#endif
 /* --------------------------------------------------------------------- */
 /* Function : XGI_SetLCDAGroup */
 /* Input : */
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetLCDAGroup( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+void XGI_SetLCDAGroup(unsigned short ModeNo,
+		      unsigned short ModeIdIndex,
+		      struct xgi_hw_device_info *HwDeviceExtension,
+		      struct vb_device_info *pVBInfo)
 {
-    USHORT RefreshRateTableIndex ;
-    /* USHORT temp ; */
+    unsigned short RefreshRateTableIndex ;
+    /* unsigned short temp ; */
 
     /* pVBInfo->SelectCRT2Rate = 0 ; */
 
@@ -2735,9 +2685,11 @@ void XGI_SetLCDAGroup( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetLVDSResInfo( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO  pVBInfo )
+void XGI_GetLVDSResInfo(unsigned short ModeNo,
+			unsigned short ModeIdIndex,
+			struct vb_device_info *pVBInfo)
 {
-    USHORT resindex , xres , yres , modeflag ;
+    unsigned short resindex , xres , yres , modeflag ;
 
     if ( ModeNo <= 0x13 )
     {
@@ -2803,17 +2755,20 @@ void XGI_GetLVDSResInfo( USHORT ModeNo , USHORT ModeIdIndex,PVB_DEVICE_INFO  pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetLVDSData(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+void XGI_GetLVDSData(unsigned short ModeNo,
+		     unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ;
-    XGI330_LVDSDataStruct *LCDPtr = NULL ;
-    XGI330_CHTVDataStruct  *TVPtr = NULL ;
+    unsigned short tempbx ;
+    struct XGI330_LVDSDataStruct *LCDPtr = NULL ;
+    struct XGI330_CHTVDataStruct  *TVPtr = NULL ;
 
     tempbx = 2 ;
 
     if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
     {
-        LCDPtr = ( XGI330_LVDSDataStruct * )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo) ;
+	LCDPtr = (struct XGI330_LVDSDataStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
         pVBInfo->VGAHT = LCDPtr->VGAHT ;
         pVBInfo->VGAVT = LCDPtr->VGAVT ;
         pVBInfo->HT = LCDPtr->LCDHT ;
@@ -2823,7 +2778,7 @@ void XGI_GetLVDSData(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTa
     {
         if ( pVBInfo->VBInfo & SetCRT2ToTV )
         {
-            TVPtr = ( XGI330_CHTVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+	    TVPtr = (struct XGI330_CHTVDataStruct *)XGI_GetTVPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
             pVBInfo->VGAHT = TVPtr->VGAHT ;
             pVBInfo->VGAVT = TVPtr->VGAVT ;
             pVBInfo->HT = TVPtr->LCDHT ;
@@ -2866,16 +2821,18 @@ void XGI_GetLVDSData(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTa
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
-                        USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+void XGI_ModCRT1Regs(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct xgi_hw_device_info *HwDeviceExtension,
+		     struct vb_device_info *pVBInfo)
 {
-    UCHAR index ;
-    USHORT tempbx , i ;
-    XGI_LVDSCRT1HDataStruct  *LCDPtr = NULL ;
-    XGI_LVDSCRT1VDataStruct  *LCDPtr1 =NULL ;
-    /* XGI330_CHTVDataStruct *TVPtr = NULL ; */
-    XGI_CH7007TV_TimingHStruct *CH7007TV_TimingHPtr = NULL;
-    XGI_CH7007TV_TimingVStruct *CH7007TV_TimingVPtr = NULL;
+    unsigned char index;
+    unsigned short tempbx , i ;
+    struct XGI_LVDSCRT1HDataStruct  *LCDPtr = NULL;
+    struct XGI_LVDSCRT1VDataStruct  *LCDPtr1 = NULL;
+    /* struct XGI330_CHTVDataStruct *TVPtr = NULL ; */
+    struct XGI_CH7007TV_TimingHStruct *CH7007TV_TimingHPtr = NULL;
+    struct XGI_CH7007TV_TimingVStruct *CH7007TV_TimingVPtr = NULL;
 
     if( ModeNo <= 0x13 )
         index = pVBInfo->SModeIDTable[ ModeIdIndex ].St_CRT2CRTC ;
@@ -2890,7 +2847,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
 
         if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
         {
-            LCDPtr = ( XGI_LVDSCRT1HDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+	    LCDPtr = (struct XGI_LVDSCRT1HDataStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
 
             for( i = 0 ; i < 8 ; i++ )
                 pVBInfo->TimingH[ 0 ].data[ i ] = LCDPtr[ 0 ].Reg[ i ] ;
@@ -2900,7 +2857,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
         {
             if ( pVBInfo->VBInfo & SetCRT2ToTV )
             {
-                CH7007TV_TimingHPtr = ( XGI_CH7007TV_TimingHStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		CH7007TV_TimingHPtr = (struct XGI_CH7007TV_TimingHStruct *)XGI_GetTVPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
 
                 for( i = 0 ; i < 8 ; i++ )
                     pVBInfo->TimingH[ 0 ].data[ i ] = CH7007TV_TimingHPtr[ 0 ].data[ i ] ;
@@ -2910,7 +2867,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
         /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
         {
             if ( pVBInfo->VBInfo & SetCRT2ToTV )
-                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		TVPtr = ( struct XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
         } */
 
         XGI_SetCRT1Timing_H(pVBInfo,HwDeviceExtension) ;
@@ -2925,7 +2882,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
 
         if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
         {
-            LCDPtr1 = ( XGI_LVDSCRT1VDataStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+	    LCDPtr1 = (struct XGI_LVDSCRT1VDataStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
             for( i = 0 ; i < 7 ; i++ )
                 pVBInfo->TimingV[ 0 ].data[ i ] = LCDPtr1[ 0 ].Reg[ i ] ;
         }
@@ -2934,7 +2891,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
         {
             if ( pVBInfo->VBInfo & SetCRT2ToTV )
             {
-                CH7007TV_TimingVPtr = ( XGI_CH7007TV_TimingVStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		CH7007TV_TimingVPtr = (struct XGI_CH7007TV_TimingVStruct *)XGI_GetTVPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
 
                 for( i = 0 ; i < 7 ; i++ )
                     pVBInfo->TimingV[ 0 ].data[ i ] = CH7007TV_TimingVPtr[ 0 ].data[ i ] ;
@@ -2943,7 +2900,7 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
         /* if ( pVBInfo->IF_DEF_CH7017 == 1 )
         {
             if ( pVBInfo->VBInfo & SetCRT2ToTV )
-                TVPtr = ( XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		TVPtr = ( struct XGI330_CHTVDataStruct *)XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
         } */
 
         XGI_SetCRT1Timing_V( ModeIdIndex , ModeNo , pVBInfo) ;
@@ -2966,12 +2923,14 @@ void XGI_ModCRT1Regs( USHORT ModeNo , USHORT ModeIdIndex ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+void XGI_SetLVDSRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
+		     unsigned short RefreshRateTableIndex,
+		     struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx , tempax , tempcx , tempdx , push1 , push2 , modeflag ;
+    unsigned short tempbx , tempax , tempcx , tempdx , push1 , push2 , modeflag ;
     unsigned long temp , temp1 , temp2 , temp3 , push3 ;
-    XGI330_LCDDataDesStruct  *LCDPtr = NULL ;
-    XGI330_LCDDataDesStruct2  *LCDPtr1 = NULL ;
+    struct XGI330_LCDDataDesStruct  *LCDPtr = NULL ;
+    struct XGI330_LCDDataDesStruct2  *LCDPtr1 = NULL ;
 
     if ( ModeNo > 0x13 )
         modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
@@ -2985,16 +2944,16 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             if ( pVBInfo->IF_DEF_OEMUtil == 1 )
             {
     	        tempbx = 8 ;
-    	        LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		LCDPtr = (struct XGI330_LCDDataDesStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
             }
 
             if ( ( pVBInfo->IF_DEF_OEMUtil == 0 ) || ( LCDPtr == 0 ) )
             {
                 tempbx = 3 ;
                 if ( pVBInfo->LCDInfo & EnableScalingLCD )
-                    LCDPtr1 = ( XGI330_LCDDataDesStruct2 * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		    LCDPtr1 = (struct XGI330_LCDDataDesStruct2 *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
                 else
-                    LCDPtr = ( XGI330_LCDDataDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+		    LCDPtr = (struct XGI330_LCDDataDesStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
             }
 
             XGI_GetLCDSync( &tempax , &tempbx ,pVBInfo) ;
@@ -3056,8 +3015,8 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             tempcx = tempcx >> 3 ;
             tempbx = tempbx >> 3 ;
 
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x16 , ( USHORT )( tempbx & 0xff ) ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x17 , ( USHORT )( tempcx & 0xff ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x16, (unsigned short)(tempbx & 0xff));
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x17, (unsigned short)(tempcx & 0xff));
 
             tempax = pVBInfo->HT ;
 
@@ -3085,7 +3044,7 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             tempax |= tempcx ;
 
             XGINew_SetReg1( pVBInfo->Part1Port , 0x15 , tempax ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x14 , ( USHORT )( tempbx & 0xff ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x14, (unsigned short)(tempbx & 0xff));
 
             tempax = pVBInfo->VT ;
             if ( pVBInfo->LCDInfo & EnableScalingLCD )
@@ -3099,13 +3058,13 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             if ( tempcx >= tempax )
                 tempcx -= tempax ;
 
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x1b , ( USHORT )( tempbx & 0xff ) ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x1c , ( USHORT )( tempcx & 0xff ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x1b, (unsigned short)(tempbx & 0xff));
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x1c, (unsigned short)(tempcx & 0xff));
 
             tempbx = ( tempbx >> 8 ) & 0x07 ;
             tempcx = ( tempcx >> 8 ) & 0x07 ;
 
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x1d , ( USHORT )( ( tempcx << 3 ) | tempbx ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x1d, (unsigned short)((tempcx << 3) | tempbx));
 
             tempax = pVBInfo->VT ;
             if ( pVBInfo->LCDInfo & EnableScalingLCD )
@@ -3123,8 +3082,8 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             if ( tempcx >= tempax )
                 tempcx -= tempax ;
 
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x18 , ( USHORT )( tempbx & 0xff ) ) ;
-            XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , ~0x0f , ( USHORT )( tempcx & 0x0f ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x18, (unsigned short)(tempbx & 0xff));
+	    XGINew_SetRegANDOR(pVBInfo->Part1Port, 0x19, ~0x0f, (unsigned short)(tempcx & 0x0f));
 
             tempax = ( ( tempbx >> 8 ) & 0x07 ) << 3 ;
 
@@ -3145,7 +3104,7 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             temp = tempax ;            /* 0430 ylshieh */
             temp1 = ( temp << 18 ) / tempbx ;
 
-            tempdx = ( USHORT )( ( temp << 18 ) % tempbx ) ;
+	    tempdx = (unsigned short)((temp << 18) % tempbx);
 
             if ( tempdx != 0 )
             temp1 += 1 ;
@@ -3153,10 +3112,10 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             temp2 = temp1 ;
             push3 = temp2 ;
 
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x37 , ( USHORT )( temp2 & 0xff ) ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x36 , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x37, (unsigned short)(temp2 & 0xff));
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x36, (unsigned short)((temp2 >> 8) & 0xff));
 
-            tempbx = ( USHORT )( temp2 >> 16 ) ;
+	    tempbx = (unsigned short)(temp2 >> 16);
             tempax = tempbx & 0x03 ;
 
             tempbx = pVBInfo->VGAVDE ;
@@ -3168,10 +3127,10 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
             if ( pVBInfo->VBType & VB_XGI301C )
             {
                 temp2 = push3 ;
-      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3c , ( USHORT )( temp2 & 0xff ) ) ;
-      	        XGINew_SetReg1( pVBInfo->Part4Port , 0x3b , ( USHORT )( ( temp2 >> 8 ) & 0xff ) ) ;
-      	        tempbx = ( USHORT )( temp2 >> 16 ) ;
-      	        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x3a , ~0xc0 , ( USHORT )( ( tempbx & 0xff ) << 6 ) ) ;
+		XGINew_SetReg1(pVBInfo->Part4Port, 0x3c, (unsigned short)(temp2 & 0xff));
+		XGINew_SetReg1(pVBInfo->Part4Port, 0x3b, (unsigned short)((temp2 >> 8) & 0xff));
+		tempbx = (unsigned short)(temp2 >> 16);
+		XGINew_SetRegANDOR(pVBInfo->Part4Port, 0x3a, ~0xc0, (unsigned short)((tempbx & 0xff) << 6));
 
                 tempcx = pVBInfo->VGAVDE ;
                 if ( tempcx == pVBInfo->VDE )
@@ -3185,7 +3144,7 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 
             temp1 = tempcx << 16 ;
 
-            tempax = ( USHORT )( temp1 / tempbx ) ;
+	    tempax = (unsigned short)(temp1 / tempbx);
 
             if ( ( tempbx & 0xffff ) == ( tempcx & 0xffff ) )
                 tempax = 65535 ;
@@ -3199,28 +3158,28 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 
             temp3 = ( temp3 & 0xffff0000 ) + ( temp1 & 0xffff ) ;
 
-            tempax = ( USHORT )( temp3 & 0xff ) ;
+	    tempax = (unsigned short)(temp3 & 0xff);
             XGINew_SetReg1( pVBInfo->Part1Port , 0x1f , tempax ) ;
 
             temp1 = pVBInfo->VGAVDE << 18 ;
             temp1 = temp1 / push3 ;
-            tempbx = ( USHORT )( temp1 & 0xffff ) ;
+	    tempbx = (unsigned short)(temp1 & 0xffff);
 
             if ( pVBInfo->LCDResInfo == Panel1024x768 )
                 tempbx -= 1 ;
 
             tempax = ( ( tempbx >> 8 ) & 0xff ) << 3 ;
-            tempax |= ( USHORT )( ( temp3 >> 8 ) & 0x07 ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x20 , ( USHORT )( tempax & 0xff ) ) ;
-            XGINew_SetReg1( pVBInfo->Part1Port , 0x21 , ( USHORT )( tempbx & 0xff ) ) ;
+	    tempax |= (unsigned short)((temp3 >> 8) & 0x07);
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x20, (unsigned short)(tempax & 0xff));
+	    XGINew_SetReg1(pVBInfo->Part1Port, 0x21, (unsigned short)(tempbx & 0xff));
 
             temp3 = temp3 >> 16 ;
 
             if ( modeflag & HalfDCLK )
                 temp3 = temp3 >> 1 ;
 
-            XGINew_SetReg1(pVBInfo->Part1Port , 0x22 , ( USHORT )( ( temp3 >> 8 ) & 0xff ) ) ;
-            XGINew_SetReg1(pVBInfo->Part1Port , 0x23 , ( USHORT )( temp3 & 0xff ) ) ;
+	    XGINew_SetReg1(pVBInfo->Part1Port , 0x22, (unsigned short)((temp3 >> 8) & 0xff));
+	    XGINew_SetReg1(pVBInfo->Part1Port , 0x23, (unsigned short)(temp3 & 0xff));
         }
     }
 }
@@ -3232,9 +3191,9 @@ void XGI_SetLVDSRegs( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO  pVBInfo )
+void XGI_SetCRT2ECLK(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR di_0 , di_1 , tempal ;
+    unsigned char di_0, di_1, tempal;
     int i ;
 
     tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
@@ -3243,7 +3202,7 @@ void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 
     for( i = 0 ; i < 4 ; i++ )
     {
-        XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x31 , ~0x30 , ( USHORT )( 0x10 * i ) ) ;
+	XGINew_SetRegANDOR(pVBInfo->P3d4, 0x31, ~0x30, (unsigned short)(0x10 * i));
         if ( pVBInfo->IF_DEF_CH7007 == 1 )
         {
             XGINew_SetReg1( pVBInfo->P3c4 , 0x2b , di_0 ) ;
@@ -3269,9 +3228,9 @@ void XGI_SetCRT2ECLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_UpdateModeInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO  pVBInfo )
+void XGI_UpdateModeInfo(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempcl ,
+    unsigned short tempcl ,
            tempch ,
            temp ,
            tempbl ,
@@ -3377,7 +3336,7 @@ void XGI_UpdateModeInfo( PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetVGAType( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo)
+void XGI_GetVGAType(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
     /*
     if ( HwDeviceExtension->jChipType >= XG20 )
@@ -3399,9 +3358,9 @@ void XGI_GetVGAType( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo)
+void XGI_GetVBType(struct vb_device_info *pVBInfo)
 {
-    USHORT flag , tempbx , tempah ;
+    unsigned short flag , tempbx , tempah ;
 
     if ( pVBInfo->IF_DEF_CH7007 == 1 )
     {
@@ -3462,9 +3421,9 @@ void XGI_GetVBType(PVB_DEVICE_INFO  pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetVBInfo( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO  pVBInfo )
+void XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
+    unsigned short tempax ,
            push ,
            tempbx ,
            temp ,
@@ -3703,9 +3662,9 @@ void XGI_GetVBInfo( USHORT ModeNo , USHORT ModeIdIndex , PXGI_HW_DEVICE_INFO HwD
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetTVInfo( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO  pVBInfo )
+void XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT temp ,
+    unsigned short temp ,
            tempbx = 0 ,
            resinfo = 0 ,
            modeflag ,
@@ -3838,9 +3797,10 @@ void XGI_GetTVInfo( USHORT ModeNo , USHORT ModeIdIndex ,PVB_DEVICE_INFO  pVBInfo
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_GetLCDInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_GetLCDInfo(unsigned short ModeNo, unsigned short ModeIdIndex,
+			     struct vb_device_info *pVBInfo)
 {
-    USHORT temp ,
+    unsigned short temp ,
            tempax ,
            tempbx ,
            modeflag ,
@@ -4047,96 +4007,12 @@ BOOLEAN XGI_GetLCDInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBI
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_SearchModeID(unsigned short ModeNo,
+			       unsigned short *ModeIdIndex,
+			       struct vb_device_info *pVBInfo)
 {
 
-#ifdef TC
-
-    if ( ModeNo <= 5 )
-        ModeNo |= 1 ;
-
-    if ( ModeNo <= 0x13 )
-    {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
-        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
-        {
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
-                return( FALSE ) ;
-        }
-
-        VGA_INFO = ( PUCHAR )MK_FP( 0 , 0x489 ) ;
-
-        if ( ModeNo == 0x07 )
-        {
-            if ( ( *VGA_INFO & 0x10 ) != 0 )
-                ( *ModeIdIndex )++ ; /* 400 lines */
-            /* else 350 lines */
-        }
-
-        if ( ModeNo <= 3 )
-        {
-            if ( ( *VGA_INFO & 0x80 ) == 0 )
-            {
-                ( *ModeIdIndex )++ ;
-                if ( ( *VGA_INFO & 0x10 ) != 0 )
-                    ( *ModeIdIndex )++ ; /* 400 lines */
-                /* else 350 lines */
-            }
-            /* else 200 lines */
-        }
-    }
-    else
-    {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
-        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
-        {
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
-                return( FALSE ) ;
-        }
-    }
-
-
-#endif
-
-#ifdef WIN2000
-
-    if ( ModeNo <= 5 )
-        ModeNo |= 1 ;
-    if ( ModeNo <= 0x13 )
-    {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
-        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
-        {
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
-                return( FALSE ) ;
-        }
-
-        if ( ModeNo == 0x07 )
-            ( *ModeIdIndex )++ ; /* 400 lines */
-
-        if ( ModeNo <=3 )
-            ( *ModeIdIndex ) += 2 ; /* 400 lines */
-        /* else 350 lines */
-    }
-    else
-    {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
-        for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
-        {
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
-                return( FALSE ) ;
-        }
-    }
 
-#endif
 
 #ifdef LINUX /* chiawen for linux solution */
 
@@ -4144,13 +4020,13 @@ BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO p
         ModeNo |= 1 ;
     if ( ModeNo <= 0x13 )
     {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(XGI_StStruct);(*ModeIdIndex)++) */
+	/* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->SModeIDTable)/sizeof(struct XGI_StStruct);(*ModeIdIndex)++) */
         for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
         {
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->SModeIDTable[ *ModeIdIndex ].St_ModeID == 0xFF )
-                return( FALSE ) ;
+		if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID == ModeNo)
+			break;
+		if (pVBInfo->SModeIDTable[*ModeIdIndex].St_ModeID == 0xFF)
+			return 0;
         }
 
         if ( ModeNo == 0x07 )
@@ -4162,19 +4038,19 @@ BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO p
     }
     else
     {
-        /* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(XGI_ExtStruct);(*ModeIdIndex)++) */
+	/* for (*ModeIdIndex=0;*ModeIdIndex<sizeof(pVBInfo->EModeIDTable)/sizeof(struct XGI_ExtStruct);(*ModeIdIndex)++) */
         for( *ModeIdIndex = 0 ; ; ( *ModeIdIndex )++ )
         {
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == ModeNo )
-                break ;
-            if ( pVBInfo->EModeIDTable[ *ModeIdIndex ].Ext_ModeID == 0xFF )
-                return( FALSE ) ;
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == ModeNo)
+			break;
+		if (pVBInfo->EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF)
+			return 0;
         }
     }
 
 #endif
 
-    return( TRUE ) ;
+    return 1;
 }
 
 
@@ -4188,9 +4064,12 @@ BOOLEAN XGI_SearchModeID( USHORT ModeNo , USHORT *ModeIdIndex, PVB_DEVICE_INFO p
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+unsigned char XGINew_CheckMemorySize(struct xgi_hw_device_info *HwDeviceExtension,
+				     unsigned short ModeNo,
+				     unsigned short ModeIdIndex,
+				     struct vb_device_info *pVBInfo)
 {
-    USHORT memorysize ,
+    unsigned short memorysize ,
            modeflag ,
            temp ,
            temp1 ,
@@ -4199,7 +4078,7 @@ BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT Mode
 /*  if ( ( HwDeviceExtension->jChipType == XGI_650 ) ||
          ( HwDeviceExtension->jChipType == XGI_650M ) )
     {
-        return( TRUE ) ;
+	return 1;
     } */
 
     if ( ModeNo <= 0x13 )
@@ -4257,10 +4136,10 @@ BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT Mode
             temp <<= 1 ;
         }
     }
-    if ( temp < memorysize )
-        return( FALSE ) ;
+    if (temp < memorysize)
+	    return 0;
     else
-        return( TRUE ) ;
+	    return 1;
 }
 
 
@@ -4270,10 +4149,10 @@ BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT Mode
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-/*void XGINew_IsLowResolution( USHORT ModeNo , USHORT ModeIdIndex, BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO pVBInfo)
+/*void XGINew_IsLowResolution(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned char XGINew_CheckMemorySize(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT data ;
-    USHORT ModeFlag ;
+    unsigned short data ;
+    unsigned short ModeFlag ;
 
     data = XGINew_GetReg1( pVBInfo->P3c4 , 0x0F ) ;
     data &= 0x7F ;
@@ -4302,7 +4181,7 @@ BOOLEAN XGINew_CheckMemorySize(PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT Mode
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+void XGI_DisplayOn(struct xgi_hw_device_info *pXGIHWDE, struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetRegANDOR(pVBInfo->P3c4,0x01,0xDF,0x00);
@@ -4331,12 +4210,6 @@ void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
 
     if (pVBInfo->IF_DEF_CH7007 == 1) /* [Billy] 07/05/23 For CH7007 */
     {
-#ifdef WIN2000
-       if ( IsCH7007TVMode( pVBInfo ) )
-       {
-           TurnOnCH7007(pXGIHWDE->pDevice) ; /* 07/05/28 */
-       }
-#endif
 
     }
 
@@ -4372,7 +4245,7 @@ void XGI_DisplayOn( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
+void XGI_DisplayOff(struct xgi_hw_device_info *pXGIHWDE, struct vb_device_info *pVBInfo)
 {
 
     if ( pXGIHWDE->jChipType == XG21 )
@@ -4392,9 +4265,6 @@ void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
     {
        /* if( IsCH7007TVMode( pVBInfo ) == 0 ) */
        {
-#ifdef WIN2000
-         TurnOffCH7007(pXGIHWDE->pDevice) ;  /* 07/05/28 */
-#endif
        }
     }
 
@@ -4423,7 +4293,7 @@ void XGI_DisplayOff( PXGI_HW_DEVICE_INFO pXGIHWDE , PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : chiawen for sensecrt1 */
 /* --------------------------------------------------------------------- */
-void XGI_WaitDisply( PVB_DEVICE_INFO pVBInfo )
+void XGI_WaitDisply(struct vb_device_info *pVBInfo)
 {
     while( ( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) )
         break ;
@@ -4439,58 +4309,59 @@ void XGI_WaitDisply( PVB_DEVICE_INFO pVBInfo )
 /* Description : */
 /* --------------------------------------------------------------------- */
 
-void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
+void XGI_SenseCRT1(struct vb_device_info *pVBInfo)
 {
-    UCHAR CRTCData[ 17 ] = { 0x5F , 0x4F , 0x50 , 0x82 , 0x55 , 0x81 ,
-                             0x0B , 0x3E , 0xE9 , 0x0B , 0xDF , 0xE7 ,
-                             0x04 , 0x00 , 0x00 , 0x05 , 0x00 } ;
+	unsigned char CRTCData[17] = {
+		0x5F , 0x4F , 0x50 , 0x82 , 0x55 , 0x81 ,
+		0x0B , 0x3E , 0xE9 , 0x0B , 0xDF , 0xE7 ,
+		0x04 , 0x00 , 0x00 , 0x05 , 0x00 };
 
-    UCHAR SR01 = 0 , SR1F = 0 , SR07 = 0 , SR06 = 0 ;
+	unsigned char SR01 = 0, SR1F = 0, SR07 = 0, SR06 = 0;
 
-    UCHAR CR17 , CR63 , SR31 ;
-    USHORT temp ;
-    UCHAR DAC_TEST_PARMS[ 3 ] = { 0x0F , 0x0F , 0x0F } ;
+	unsigned char CR17, CR63, SR31;
+	unsigned short temp ;
+	unsigned char DAC_TEST_PARMS[3] = { 0x0F, 0x0F, 0x0F } ;
 
     int i ;
     XGINew_SetReg1( pVBInfo->P3c4 , 0x05 , 0x86 ) ;
 
     /* [2004/05/06] Vicent to fix XG42 single LCD sense to CRT+LCD */
     XGINew_SetReg1( pVBInfo->P3d4 , 0x57 , 0x4A ) ;
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) | 0x02 ) ) ;
+    XGINew_SetReg1(pVBInfo->P3d4, 0x53, (unsigned char)(XGINew_GetReg1(pVBInfo->P3d4, 0x53) | 0x02));
 
-    SR31 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x31 ) ;
-    CR63 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x63 ) ;
-    SR01 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x01 ) ;
+    SR31 = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x31);
+    CR63 = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x63);
+    SR01 = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x01);
 
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x01 , ( UCHAR )( SR01 & 0xDF ) ) ;
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x63 , ( UCHAR )( CR63 & 0xBF ) ) ;
+    XGINew_SetReg1(pVBInfo->P3c4, 0x01, (unsigned char)(SR01 & 0xDF));
+    XGINew_SetReg1(pVBInfo->P3d4, 0x63, (unsigned char)(CR63 & 0xBF));
 
-    CR17 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x17 ) ;
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x17 , ( UCHAR )( CR17 | 0x80 ) ) ;
+    CR17 = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x17);
+    XGINew_SetReg1(pVBInfo->P3d4, 0x17, (unsigned char)(CR17 | 0x80)) ;
 
-    SR1F = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR )( SR1F | 0x04 ) ) ;
+    SR1F = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x1F);
+    XGINew_SetReg1(pVBInfo->P3c4, 0x1F, (unsigned char)(SR1F | 0x04));
 
-    SR07 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x07 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x07 , ( UCHAR )( SR07 & 0xFB ) ) ;
-    SR06 = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x06 ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x06 , ( UCHAR )( SR06 & 0xC3 ) ) ;
+    SR07 = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x07);
+    XGINew_SetReg1(pVBInfo->P3c4, 0x07, (unsigned char)(SR07 & 0xFB));
+    SR06 = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x06);
+    XGINew_SetReg1(pVBInfo->P3c4, 0x06, (unsigned char)(SR06 & 0xC3));
 
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , 0x00 ) ;
 
     for( i = 0 ; i < 8 ; i++ )
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )i , CRTCData[ i ] ) ;
+	    XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)i, CRTCData[i]);
 
     for( i = 8 ; i < 11 ; i++ )
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 8 ) , CRTCData[ i ] ) ;
+	    XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)(i + 8), CRTCData[i]);
 
     for( i = 11 ; i < 13 ; i++ )
-        XGINew_SetReg1( pVBInfo->P3d4 , ( USHORT )( i + 4 ) , CRTCData[ i ] ) ;
+	    XGINew_SetReg1(pVBInfo->P3d4, (unsigned short)(i + 4), CRTCData[i]);
 
     for( i = 13 ; i < 16 ; i++ )
-        XGINew_SetReg1( pVBInfo->P3c4 , ( USHORT )( i - 3 ) , CRTCData[ i ] ) ;
+	    XGINew_SetReg1(pVBInfo->P3c4, (unsigned short)(i - 3), CRTCData[i]);
 
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x0E , ( UCHAR )( CRTCData[ 16 ] & 0xE0 ) ) ;
+    XGINew_SetReg1(pVBInfo->P3c4, 0x0E, (unsigned char)(CRTCData[16] & 0xE0));
 
     XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , 0x00 ) ;
     XGINew_SetReg1( pVBInfo->P3c4 , 0x2B , 0x1B ) ;
@@ -4500,9 +4371,9 @@ void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
 
     for( i = 0 ; i < 256 ; i++ )
     {
-        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 0 ] ) ;
-        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 1 ] ) ;
-        XGINew_SetReg3( ( pVBInfo->P3c8 + 1 ) , ( UCHAR )DAC_TEST_PARMS[ 2 ] ) ;
+	XGINew_SetReg3((pVBInfo->P3c8 + 1), (unsigned char)DAC_TEST_PARMS[0]);
+	XGINew_SetReg3((pVBInfo->P3c8 + 1), (unsigned char)DAC_TEST_PARMS[1]);
+	XGINew_SetReg3((pVBInfo->P3c8 + 1), (unsigned char)DAC_TEST_PARMS[2]);
     }
 
     XGI_VBLongWait( pVBInfo ) ;
@@ -4538,148 +4409,18 @@ void XGI_SenseCRT1( PVB_DEVICE_INFO pVBInfo )
     XGINew_SetReg1( pVBInfo->P3c4 , 0x31 , SR31 ) ;
 
     /* [2004/05/11] Vicent */
-    XGINew_SetReg1( pVBInfo->P3d4 , 0x53 , ( UCHAR )( XGINew_GetReg1( pVBInfo->P3d4 , 0x53 ) & 0xFD ) ) ;
-    XGINew_SetReg1( pVBInfo->P3c4 , 0x1F , ( UCHAR ) SR1F ) ;
+    XGINew_SetReg1(pVBInfo->P3d4, 0x53,
+		   (unsigned char)(XGINew_GetReg1(pVBInfo->P3d4, 0x53) & 0xFD));
+    XGINew_SetReg1(pVBInfo->P3c4, 0x1F, (unsigned char)SR1F);
 }
 
 
 
 
 
-#ifdef TC
-/* --------------------------------------------------------------------- */
-/* Function : INT1AReturnCode */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-int INT1AReturnCode( union REGS regs )
-{
-    if ( regs.x.cflag )
-    {
-        /* printf( "Error to find pci device!\n" ) ; */
-        return( 1 ) ;
-    }
 
-    switch(regs.h.ah)
-    {
-        case 0: return 0;
-            break ;
-        case 0x81:
-            printf( "Function not support\n" ) ;
-            break ;
-        case 0x83:
-            printf( "bad vendor id\n" ) ;
-            break ;
-        case 0x86:
-            printf( "device not found\n" ) ;
-            break ;
-        case 0x87:
-            printf( "bad register number\n" ) ;
-            break ;
-        case 0x88:
-            printf( "set failed\n" ) ;
-            break ;
-        case 0x89:
-            printf( "buffer too small" ) ;
-            break ;
-        default:
-            break ;
-    }
-    return( 1 ) ;
-}
 
 
-/* --------------------------------------------------------------------- */
-/* Function : FindPCIIOBase */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-unsigned FindPCIIOBase( unsigned index , unsigned deviceid )
-{
-    union REGS regs ;
-
-    regs.h.ah = 0xb1 ;	/* PCI_FUNCTION_ID */
-    regs.h.al = 0x02 ;	/* FIND_PCI_DEVICE */
-    regs.x.cx = deviceid ;
-    regs.x.dx = 0x1039 ;
-    regs.x.si = index ;	/* find n-th device */
-
-    int86( 0x1A , &regs , &regs ) ;
-
-    if ( INT1AReturnCode( regs ) != 0 )
-        return( 0 ) ;
-
-    /* regs.h.bh bus number */
-    /* regs.h.bl device number */
-    regs.h.ah = 0xb1 ;  /* PCI_FUNCTION_ID */
-    regs.h.al = 0x09 ;  /* READ_CONFIG_WORD */
-    regs.x.cx = deviceid ;
-    regs.x.dx = 0x1039 ;
-    regs.x.di = 0x18 ;  /* register number */
-    int86( 0x1A , &regs , &regs ) ;
-
-    if ( INT1AReturnCode( regs ) != 0 )
-        return( 0 ) ;
-
-    return( regs.x.cx ) ;
-}
-
-#endif
-
-
-
-#ifdef TC
-/* --------------------------------------------------------------------- */
-/* Function : main */
-/* Input : */
-/* Output : */
-/* Description : */
-/* --------------------------------------------------------------------- */
-void main(int argc, char *argv[])
-{
-    XGI_HW_DEVICE_INFO HwDeviceExtension ;
-    USHORT temp ;
-    USHORT ModeNo ;
-
-    /* HwDeviceExtension.pjVirtualRomBase =(PUCHAR) MK_FP(0xC000,0); */
-    /* HwDeviceExtension.pjVideoMemoryAddress = (PUCHAR)MK_FP(0xA000,0); */
-
-
-    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 ,0x6300 ) & 0xFF80 ) + 0x30 ;
-    HwDeviceExtension.jChipType = XGI_340 ;
-
-
-
-    /* HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x5315 ) & 0xFF80 ) + 0x30 ; */
-
-    HwDeviceExtension.pjIOAddress = ( FindPCIIOBase( 0 , 0x330 ) & 0xFF80 ) + 0x30 ;
-    HwDeviceExtension.jChipType = XGI_340 ;
-
-
-    HwDeviceExtension.ujVBChipID = VB_CHIP_301 ;
-    StrCpy(HwDeviceExtension.szVBIOSVer , "0.84" ) ;
-    HwDeviceExtension.bSkipDramSizing = FALSE ;
-    HwDeviceExtension.ulVideoMemorySize = 0 ;
-
-    if ( argc == 2 )
-    {
-        ModeNo = atoi( argv[ 1 ] ) ;
-    }
-    else
-    {
-        ModeNo = 0x2e ;
-        /* ModeNo = 0x37 ; 1024x768x 4bpp */
-        /* ModeNo = 0x38 ; 1024x768x 8bpp */
-        /* ModeNo = 0x4A ; 1024x768x 16bpp */
-        /* ModeNo = 0x47 ; 800x600x 16bpp */
-    }
-
-    /* XGIInitNew( &HwDeviceExtension ) ; */
-    XGISetModeNew( &HwDeviceExtension , ModeNo ) ;
-}
-#endif
 
 
 /* --------------------------------------------------------------------- */
@@ -4688,7 +4429,7 @@ void main(int argc, char *argv[])
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_WaitDisplay( PVB_DEVICE_INFO pVBInfo )
+void XGI_WaitDisplay(struct vb_device_info *pVBInfo)
 {
     while( !( XGINew_GetReg2( pVBInfo->P3da ) & 0x01 ) ) ;
 
@@ -4704,9 +4445,11 @@ void XGI_WaitDisplay( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_SetCRT2Group301( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_SetCRT2Group301(unsigned short ModeNo,
+				  struct xgi_hw_device_info *HwDeviceExtension,
+				  struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            ModeIdIndex ,
            RefreshRateTableIndex ;
 
@@ -4739,7 +4482,7 @@ BOOLEAN XGI_SetCRT2Group301( USHORT ModeNo , PXGI_HW_DEVICE_INFO HwDeviceExtensi
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_AutoThreshold(  PVB_DEVICE_INFO pVBInfo )
+void XGI_AutoThreshold(struct vb_device_info *pVBInfo)
 {
     if ( !( pVBInfo->SetFlag & Win9xDOSMode ) )
       XGINew_SetRegOR( pVBInfo->Part1Port , 0x01 , 0x40 ) ;
@@ -4752,9 +4495,9 @@ void XGI_AutoThreshold(  PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SaveCRT2Info( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo)
+void XGI_SaveCRT2Info(unsigned short ModeNo, struct vb_device_info *pVBInfo)
 {
-    USHORT temp1 ,
+    unsigned short temp1 ,
            temp2 ;
 
     XGINew_SetReg1( pVBInfo->P3d4 , 0x34 , ModeNo ) ;  /* reserve CR34 for CRT1 Mode No */
@@ -4770,9 +4513,11 @@ void XGI_SaveCRT2Info( USHORT ModeNo , PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetCRT2ResInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_GetCRT2ResInfo(unsigned short ModeNo,
+			unsigned short ModeIdIndex,
+			struct vb_device_info *pVBInfo)
 {
-    USHORT xres ,
+    unsigned short xres ,
            yres ,
            modeflag ,
            resindex ;
@@ -4867,7 +4612,7 @@ void XGI_GetCRT2ResInfo( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_IsLCDDualLink( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_IsLCDDualLink(struct vb_device_info *pVBInfo)
 {
 
     if ( ( ( ( pVBInfo->VBInfo & SetCRT2ToLCD ) | SetCRT2ToLCDA ) ) && ( pVBInfo->LCDInfo & SetLCDDualLink ) ) /* shampoo0129 */
@@ -4883,15 +4628,15 @@ BOOLEAN XGI_IsLCDDualLink( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_GetCRT2Data(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax = 0,
+    unsigned short tempax = 0,
            tempbx ,
            modeflag ,
            resinfo ;
 
-    XGI_LCDDataStruct *LCDPtr = NULL ;
-    XGI_TVDataStruct  *TVPtr = NULL ;
+    struct XGI_LCDDataStruct *LCDPtr = NULL ;
+    struct XGI_TVDataStruct  *TVPtr = NULL ;
 
     if ( ModeNo <= 0x13 )
     {
@@ -4917,7 +4662,7 @@ void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTa
 
     if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
     {
-        LCDPtr = (XGI_LCDDataStruct* )XGI_GetLcdPtr( tempbx, ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+	LCDPtr = (struct XGI_LCDDataStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
 
         pVBInfo->RVBHCMAX = LCDPtr->RVBHCMAX ;
         pVBInfo->RVBHCFACT = LCDPtr->RVBHCFACT ;
@@ -5021,7 +4766,7 @@ void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTa
     if ( pVBInfo->VBInfo & ( SetCRT2ToTV ) )
     {
         tempbx = 4 ;
-        TVPtr = ( XGI_TVDataStruct * )XGI_GetTVPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+	TVPtr = (struct XGI_TVDataStruct *)XGI_GetTVPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
 
         pVBInfo->RVBHCMAX = TVPtr->RVBHCMAX ;
         pVBInfo->RVBHCFACT = TVPtr->RVBHCFACT ;
@@ -5109,11 +4854,9 @@ void XGI_GetCRT2Data(  USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTa
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT2VCLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT2VCLK(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    UCHAR di_0 ,
-          di_1 ,
-          tempal ;
+	unsigned char di_0, di_1, tempal;
 
     tempal = XGI_GetVCLKPtr( RefreshRateTableIndex , ModeNo , ModeIdIndex, pVBInfo ) ;
     XGI_GetVCLKLen( tempal, &di_0 , &di_1, pVBInfo ) ;
@@ -5146,9 +4889,10 @@ void XGI_SetCRT2VCLK( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTab
 /* Output : al -> VCLK Index */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetLCDVCLKPtr( UCHAR* di_0 , UCHAR *di_1, PVB_DEVICE_INFO pVBInfo )
+void XGI_GetLCDVCLKPtr(unsigned char *di_0, unsigned char *di_1,
+		       struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
     if ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToLCDA ) )
     {
@@ -5182,17 +4926,16 @@ void XGI_GetLCDVCLKPtr( UCHAR* di_0 , UCHAR *di_1, PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_GetVCLKPtr(unsigned short RefreshRateTableIndex,
+			     unsigned short ModeNo, unsigned short ModeIdIndex,
+			     struct vb_device_info *pVBInfo)
 {
 
-    USHORT index ,
+    unsigned short index ,
            modeflag ;
-#ifndef LINUX_XF86
-    USHORT tempbx ;
-#endif
-
-    UCHAR tempal ;
-    UCHAR *CHTVVCLKPtr = NULL ;
+    unsigned short tempbx ;
+    unsigned char tempal;
+    unsigned char *CHTVVCLKPtr = NULL;
 
     if ( ModeNo <= 0x13 )
         modeflag = pVBInfo->SModeIDTable[ ModeIdIndex ].St_ModeFlag ;      /* si+St_ResInfo */
@@ -5344,7 +5087,7 @@ UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdInd
 
     }
 
-    tempal = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;
+    tempal = (unsigned char)XGINew_GetReg2((pVBInfo->P3ca + 0x02));
     tempal = tempal >> 2 ;
     tempal &= 0x03 ;
 
@@ -5365,19 +5108,20 @@ UCHAR XGI_GetVCLKPtr(USHORT RefreshRateTableIndex,USHORT ModeNo,USHORT ModeIdInd
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInfo)
+void XGI_GetVCLKLen(unsigned char tempal, unsigned char *di_0,
+		    unsigned char *di_1, struct vb_device_info *pVBInfo)
 {
     if ( pVBInfo->IF_DEF_CH7007 == 1 ) /* [Billy] 2007/05/16 */
     {
        /* VideoDebugPrint((0, "XGI_GetVCLKLen: pVBInfo->IF_DEF_CH7007==1\n")); */
-        *di_0 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2B ;
-        *di_1 = ( UCHAR )XGI_CH7007VCLKData[ tempal ].SR2C ;
+	*di_0 = (unsigned char)XGI_CH7007VCLKData[tempal].SR2B;
+	*di_1 = (unsigned char)XGI_CH7007VCLKData[tempal].SR2C;
     }
     else if ( pVBInfo->VBType & ( VB_XGI301 | VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
     {
         if ( ( !( pVBInfo->VBInfo & SetCRT2ToLCDA ) ) && ( pVBInfo->SetFlag & ProgrammingCRT2 ) )
         {
-            *di_0 = ( UCHAR )XGI_VBVCLKData[ tempal ].SR2B ;
+	    *di_0 = (unsigned char)XGI_VBVCLKData[tempal].SR2B;
             *di_1 = XGI_VBVCLKData[ tempal ].SR2C ;
         }
     }
@@ -5395,11 +5139,14 @@ void XGI_GetVCLKLen(UCHAR tempal,UCHAR* di_0,UCHAR* di_1, PVB_DEVICE_INFO pVBInf
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT2Offset( USHORT ModeNo ,
-				   USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetCRT2Offset(unsigned short ModeNo,
+		       unsigned short ModeIdIndex,
+		       unsigned short RefreshRateTableIndex,
+		       struct xgi_hw_device_info *HwDeviceExtension,
+		       struct vb_device_info *pVBInfo)
 {
-    USHORT offset ;
-    UCHAR temp ;
+    unsigned short offset ;
+    unsigned char temp;
 
     if ( pVBInfo->VBInfo & SetInSlaveMode )
     {
@@ -5407,12 +5154,12 @@ void XGI_SetCRT2Offset( USHORT ModeNo ,
     }
 
     offset = XGI_GetOffset(  ModeNo , ModeIdIndex , RefreshRateTableIndex , HwDeviceExtension, pVBInfo ) ;
-    temp = ( UCHAR )( offset & 0xFF ) ;
+    temp = (unsigned char)(offset & 0xFF);
     XGINew_SetReg1( pVBInfo->Part1Port , 0x07 , temp ) ;
-    temp =( UCHAR)( ( offset & 0xFF00 ) >> 8 ) ;
-    XGINew_SetReg1( pVBInfo->Part1Port , 0x09 , temp ) ;
-    temp =( UCHAR )( ( ( offset >> 3 ) & 0xFF ) + 1 ) ;
-    XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , temp ) ;
+    temp = (unsigned char)((offset & 0xFF00) >> 8);
+    XGINew_SetReg1(pVBInfo->Part1Port , 0x09 , temp);
+    temp = (unsigned char)(((offset >> 3) & 0xFF) + 1) ;
+    XGINew_SetReg1(pVBInfo->Part1Port, 0x03, temp);
 }
 
 
@@ -5422,9 +5169,9 @@ void XGI_SetCRT2Offset( USHORT ModeNo ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension,PVB_DEVICE_INFO pVBInfo)
+unsigned short XGI_GetOffset(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT temp ,
+    unsigned short temp ,
            colordepth ,
            modeinfo ,
            index ,
@@ -5471,7 +5218,7 @@ USHORT XGI_GetOffset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableInd
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT2FIFO( PVB_DEVICE_INFO pVBInfo)
+void XGI_SetCRT2FIFO(struct vb_device_info *pVBInfo)
 {
     XGINew_SetReg1( pVBInfo->Part1Port , 0x01 , 0x3B ) ;			/* threshold high ,disable auto threshold */
     XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x02 , ~( 0x3F ) , 0x04 ) ;	/* threshold low default 04h */
@@ -5484,10 +5231,12 @@ void XGI_SetCRT2FIFO( PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_PreSetGroup1(USHORT ModeNo , USHORT ModeIdIndex ,PXGI_HW_DEVICE_INFO HwDeviceExtension,
-                       USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_PreSetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
+		      struct xgi_hw_device_info *HwDeviceExtension,
+		      unsigned short RefreshRateTableIndex,
+		      struct vb_device_info *pVBInfo)
 {
-    USHORT tempcx = 0 ,
+    unsigned short tempcx = 0 ,
            CRT1Index = 0 ,
            resinfo = 0 ;
 
@@ -5518,10 +5267,12 @@ void XGI_PreSetGroup1(USHORT ModeNo , USHORT ModeIdIndex ,PXGI_HW_DEVICE_INFO Hw
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGroup1( USHORT ModeNo , USHORT ModeIdIndex ,
-                            PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetGroup1(unsigned short ModeNo, unsigned short ModeIdIndex,
+		   struct xgi_hw_device_info *HwDeviceExtension,
+		   unsigned short RefreshRateTableIndex,
+		   struct vb_device_info *pVBInfo)
 {
-    USHORT temp = 0 ,
+    unsigned short temp = 0 ,
            tempax = 0 ,
            tempbx = 0 ,
            tempcx = 0 ,
@@ -5694,10 +5445,12 @@ void XGI_SetGroup1( USHORT ModeNo , USHORT ModeIdIndex ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void  XGI_SetLockRegs( USHORT ModeNo , USHORT ModeIdIndex ,
-                                PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void  XGI_SetLockRegs(unsigned short ModeNo, unsigned short ModeIdIndex,
+		      struct xgi_hw_device_info *HwDeviceExtension,
+		      unsigned short RefreshRateTableIndex,
+		      struct vb_device_info *pVBInfo)
 {
-    USHORT push1 ,
+    unsigned short push1 ,
            push2 ,
            tempax ,
            tempbx = 0 ,
@@ -6141,10 +5894,10 @@ void  XGI_SetLockRegs( USHORT ModeNo , USHORT ModeIdIndex ,
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIndex,
-                    PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetGroup2(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex,
+		   struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT i ,
+    unsigned short i ,
            j ,
            tempax ,
            tempbx ,
@@ -6155,9 +5908,9 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
            modeflag ,
            resinfo ,
            crt2crtc ;
-    UCHAR *TimingPoint ;
+    unsigned char *TimingPoint ;
 
-    ULONG longtemp ,
+    unsigned long longtemp ,
           tempeax ,
           tempebx ,
           temp2 ,
@@ -6266,7 +6019,7 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
         tempax = ( tempax & 0x00FF ) | ( ( tempax & 0x00FF ) << 8 ) ;
         push1 = tempax ;
         temp = ( tempax & 0xFF00 ) >> 8 ;
-        temp += ( USHORT )TimingPoint[ 0 ] ;
+	temp += (unsigned short)TimingPoint[0];
 
         if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
         {
@@ -6543,7 +6296,7 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
             tempeax += 1 ;
         }
 
-        tempax = ( USHORT )tempeax ;
+	tempax = (unsigned short)tempeax;
 
 	/* 301b */
         if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
@@ -6553,8 +6306,8 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
         /* end 301b */
 
         tempbx = push1 ;
-        tempbx =( USHORT )( ( ( tempeax & 0x0000FF00 ) & 0x1F00 ) | ( tempbx & 0x00FF ) ) ;
-        tempax =( USHORT )( ( ( tempeax & 0x000000FF ) << 8 ) | ( tempax & 0x00FF ) ) ;
+	tempbx = (unsigned short)(((tempeax & 0x0000FF00) & 0x1F00) | (tempbx & 0x00FF));
+	tempax = (unsigned short)(((tempeax & 0x000000FF) << 8) | (tempax & 0x00FF));
         temp = ( tempax & 0xFF00 ) >> 8 ;
     }
     else
@@ -6607,7 +6360,7 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
 
     XGINew_SetReg1( pVBInfo->Part2Port , 0x4d , temp ) ;
     temp=XGINew_GetReg1( pVBInfo->Part2Port , 0x43 ) ;		/* 301b change */
-    XGINew_SetReg1( pVBInfo->Part2Port , 0x43 , ( USHORT )( temp - 3 ) ) ;
+    XGINew_SetReg1( pVBInfo->Part2Port , 0x43, (unsigned short)( temp - 3 ) ) ;
 
     if ( !( pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) ) )
     {
@@ -6631,7 +6384,7 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
 
     if ( pVBInfo->TVInfo & SetPALMTV )
     {
-        tempax = ( UCHAR )XGINew_GetReg1( pVBInfo->Part2Port , 0x01 ) ;
+	tempax = (unsigned char)XGINew_GetReg1(pVBInfo->Part2Port, 0x01);
         tempax-- ;
         XGINew_SetRegAND( pVBInfo->Part2Port , 0x01 , tempax ) ;
 
@@ -6660,9 +6413,9 @@ void XGI_SetGroup2( USHORT ModeNo, USHORT ModeIdIndex, USHORT RefreshRateTableIn
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDeviceExtension,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo)
+void  XGI_SetLCDRegs(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT push1 ,
+    unsigned short push1 ,
            push2 ,
            pushbx ,
            tempax ,
@@ -6676,7 +6429,7 @@ void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDev
            modeflag ,
            CRT1Index ;
 
-    XGI_LCDDesStruct *LCDBDesPtr = NULL ;
+    struct XGI_LCDDesStruct *LCDBDesPtr = NULL ;
 
 
     if ( ModeNo <= 0x13 )
@@ -6746,7 +6499,7 @@ void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDev
 
     /* Customized LCDB Des no add */
     tempbx = 5 ;
-    LCDBDesPtr = ( XGI_LCDDesStruct * )XGI_GetLcdPtr( tempbx , ModeNo , ModeIdIndex , RefreshRateTableIndex, pVBInfo ) ;
+    LCDBDesPtr = (struct XGI_LCDDesStruct *)XGI_GetLcdPtr(tempbx, ModeNo, ModeIdIndex, RefreshRateTableIndex, pVBInfo);
     tempah = pVBInfo->LCDResInfo ;
     tempah &= PanelResInfo ;
 
@@ -6914,13 +6667,14 @@ void  XGI_SetLCDRegs(USHORT ModeNo,USHORT ModeIdIndex, PXGI_HW_DEVICE_INFO HwDev
 /* Output : di -> Tap4 Reg. Setting Pointer */
 /* Description : */
 /* --------------------------------------------------------------------- */
-XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo)
+struct XGI301C_Tap4TimingStruct *XGI_GetTap4Ptr(unsigned short tempcx,
+					 struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
+    unsigned short tempax ,
            tempbx ,
            i ;
 
-    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+    struct XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
 
     if ( tempcx == 0 )
     {
@@ -6974,12 +6728,12 @@ XGI301C_Tap4TimingStruct* XGI_GetTap4Ptr(USHORT tempcx, PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo)
+void XGI_SetTap4Regs(struct vb_device_info *pVBInfo)
 {
-    USHORT i ,
+    unsigned short i ,
            j ;
 
-    XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
+    struct XGI301C_Tap4TimingStruct *Tap4TimingPtr ;
 
     if ( !( pVBInfo->VBType & VB_XGI301C ) )
         return ;
@@ -7012,11 +6766,11 @@ void XGI_SetTap4Regs( PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetGroup3(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT i;
-    UCHAR *tempdi;
-    USHORT  modeflag;
+    unsigned short i;
+    unsigned char *tempdi;
+    unsigned short  modeflag;
 
     if(ModeNo<=0x13)
     {
@@ -7099,16 +6853,16 @@ void XGI_SetGroup3(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetGroup4(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
+    unsigned short tempax ,
            tempcx ,
            tempbx ,
            modeflag ,
            temp ,
            temp2 ;
 
-    ULONG tempebx ,
+    unsigned long tempebx ,
           tempeax ,
           templong ;
 
@@ -7230,12 +6984,12 @@ void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex
     }
 
 
-    temp = ( USHORT )( tempebx & 0x000000FF ) ;
+    temp = (unsigned short)(tempebx & 0x000000FF);
     XGINew_SetReg1( pVBInfo->Part4Port , 0x1B , temp ) ;
 
-    temp = ( USHORT )( ( tempebx & 0x0000FF00 ) >> 8 ) ;
+    temp = (unsigned short)((tempebx & 0x0000FF00) >> 8);
     XGINew_SetReg1( pVBInfo->Part4Port , 0x1A , temp ) ;
-    tempbx = ( USHORT )( tempebx >> 16 ) ;
+    tempbx = (unsigned short)(tempebx >> 16);
     temp = tempbx & 0x00FF ;
     temp = temp << 4 ;
     temp |= ( ( tempcx & 0xFF00 ) >> 8 ) ;
@@ -7350,9 +7104,9 @@ void XGI_SetGroup4(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetGroup5( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+void XGI_SetGroup5(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT Pindex ,
+    unsigned short Pindex ,
            Pdata ;
 
     Pindex = pVBInfo->Part5Port ;
@@ -7375,9 +7129,13 @@ void XGI_SetGroup5( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void *XGI_GetLcdPtr(unsigned short BX,
+		    unsigned short ModeNo,
+		    unsigned short ModeIdIndex,
+		    unsigned short RefreshRateTableIndex,
+		    struct vb_device_info *pVBInfo)
 {
-    USHORT i ,
+    unsigned short i ,
            tempdx ,
            tempcx ,
            tempbx ,
@@ -7385,7 +7143,7 @@ void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT Ref
            modeflag ,
            table ;
 
-    XGI330_LCDDataTablStruct *tempdi = 0 ;
+    struct XGI330_LCDDataTablStruct *tempdi = 0 ;
 
 
     tempbx = BX;
@@ -7877,10 +7635,13 @@ void* XGI_GetLcdPtr( USHORT BX , USHORT ModeNo , USHORT ModeIdIndex , USHORT Ref
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void *XGI_GetTVPtr(unsigned short BX, unsigned short ModeNo,
+		   unsigned short ModeIdIndex,
+		   unsigned short RefreshRateTableIndex,
+		   struct vb_device_info *pVBInfo)
 {
-    USHORT i , tempdx , tempbx , tempal , modeflag , table ;
-    XGI330_TVDataTablStruct *tempdi = 0 ;
+    unsigned short i , tempdx , tempbx , tempal , modeflag , table ;
+    struct XGI330_TVDataTablStruct *tempdi = 0 ;
 
     tempbx = BX ;
 
@@ -7955,53 +7716,9 @@ void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRat
 
     if ( table == 0x00 ) /* 07/05/22 */
     {
-#ifdef WIN2000
-        if ( pVBInfo->IF_DEF_CH7007 == 1 )
-        {
-          switch( tempdi[ i ].DATAPTR )
-          {
-            case 0:
-                return &CH7007TVCRT1UNTSC_H[ tempal ] ;
-                break ;
-            case 1:
-                return &CH7007TVCRT1ONTSC_H[ tempal ] ;
-                break ;
-            case 2:
-                return &CH7007TVCRT1UPAL_H[ tempal ] ;
-                break ;
-            case 3:
-                return &CH7007TVCRT1OPAL_H[ tempal ] ;
-                break ;
-            default:
-                break ;
-          }
-        }
-#endif
     }
     else if ( table == 0x01 )
     {
-#ifdef WIN2000
-        if ( pVBInfo->IF_DEF_CH7007 == 1 )
-        {
-          switch( tempdi[ i ].DATAPTR )
-          {
-            case 0:
-                return &CH7007TVCRT1UNTSC_V[ tempal ] ;
-                break ;
-            case 1:
-                return &CH7007TVCRT1ONTSC_V[ tempal ] ;
-                break ;
-            case 2:
-                return &CH7007TVCRT1UPAL_V[ tempal ] ;
-                break ;
-            case 3:
-                return &CH7007TVCRT1OPAL_V[ tempal ] ;
-                break ;
-            default:
-                break ;
-          }
-        }
-#endif
     }
     else if ( table == 0x04 )
     {
@@ -8075,49 +7792,6 @@ void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRat
     }
     else if( table == 0x06 )
     {
-#ifdef WIN2000
-        if ( pVBInfo->IF_DEF_CH7007 == 1 )
-        {
-          /* VideoDebugPrint((0, "XGI_GetTVPtr: pVBInfo->IF_DEF_CH7007==1\n")); */
-          switch( tempdi[ i ].DATAPTR )
-          {
-            case 0:
-                return &CH7007TVReg_UNTSC[ tempal ] ;
-                break ;
-            case 1:
-                return &CH7007TVReg_ONTSC[ tempal ] ;
-                break ;
-            case 2:
-                return &CH7007TVReg_UPAL[ tempal ] ;
-                break ;
-            case 3:
-                return &CH7007TVReg_OPAL[ tempal ] ;
-                break ;
-            default:
-                break ;
-          }
-        }
-        else
-        {
-            switch( tempdi[ i ].DATAPTR )
-            {
-              case 0:
-                return &XGI_CHTVRegUNTSC[ tempal ] ;
-                break ;
-              case 1:
-                return &XGI_CHTVRegONTSC[ tempal ] ;
-                break ;
-              case 2:
-                return &XGI_CHTVRegUPAL[ tempal ] ;
-                break ;
-              case 3:
-                return &XGI_CHTVRegOPAL[ tempal ] ;
-                break ;
-              default:
-                break ;
-            }
-        }
-#endif
     }
     return( 0 ) ;
 }
@@ -8126,18 +7800,18 @@ void* XGI_GetTVPtr (USHORT BX,USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRat
 /* --------------------------------------------------------------------- */
 /* Function : XGI_BacklightByDrv */
 /* Input : */
-/* Output : TRUE -> Skip backlight control */
+/* Output : 1 -> Skip backlight control */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_BacklightByDrv( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_BacklightByDrv(struct vb_device_info *pVBInfo)
 {
-    UCHAR tempah ;
+    unsigned char tempah ;
 
-    tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x3A ) ;
-    if ( tempah & BacklightControlBit )
-        return TRUE ;
+    tempah = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x3A) ;
+    if (tempah & BacklightControlBit)
+	    return 1;
     else
-        return FALSE ;
+	    return 0;
 }
 
 
@@ -8148,7 +7822,7 @@ BOOLEAN XGI_BacklightByDrv( PVB_DEVICE_INFO pVBInfo )
 /* Description : Turn off VDD & Backlight : Fire disable procedure */
 /* --------------------------------------------------------------------- */
 /*
-void XGI_FirePWDDisable( PVB_DEVICE_INFO pVBInfo )
+void XGI_FirePWDDisable(struct vb_device_info *pVBInfo)
 {
     XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x00 , 0xFC ) ;
 }
@@ -8160,7 +7834,7 @@ void XGI_FirePWDDisable( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : Turn on VDD & Backlight : Fire enable procedure */
 /* --------------------------------------------------------------------- */
-void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo )
+void XGI_FirePWDEnable(struct vb_device_info *pVBInfo)
 {
     XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x26 , 0x03 , 0xFC ) ;
 }
@@ -8172,7 +7846,7 @@ void XGI_FirePWDEnable(PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGI_EnableGatingCRT(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x40 ) ;
 }
@@ -8184,7 +7858,7 @@ void XGI_EnableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGI_DisableGatingCRT(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetRegANDOR( pVBInfo->P3d4 , 0x63 , 0xBF , 0x00 ) ;
@@ -8201,9 +7875,9 @@ void XGI_DisableGatingCRT(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO
 /* : bl : 3 ; T3 : the duration between CPL off and signal off */
 /* : bl : 4 ; T4 : the duration signal off and Vdd off */
 /* --------------------------------------------------------------------- */
-void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetPanelDelay(unsigned short tempbl, struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
     index = XGI_GetLCDCapPtr(pVBInfo) ;
 
@@ -8231,7 +7905,7 @@ void XGI_SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
 /* = 1011b = 0Bh ; Backlight off, Power on */
 /* = 1111b = 0Fh ; Backlight off, Power off */
 /* --------------------------------------------------------------------- */
-void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetPanelPower(unsigned short tempah, unsigned short tempbl, struct vb_device_info *pVBInfo)
 {
     if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
         XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x26 , tempbl , tempah ) ;
@@ -8239,10 +7913,10 @@ void XGI_SetPanelPower(USHORT tempah,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
         XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x11 , tempbl , tempah ) ;
 }
 
-UCHAR XG21GPIODataTransfer(UCHAR ujDate)
+unsigned char XG21GPIODataTransfer(unsigned char ujDate)
 {
-    UCHAR  ujRet = 0;
-    UCHAR  i = 0;
+    unsigned char  ujRet = 0;
+    unsigned char  i = 0;
 
     for (i=0; i<8; i++)
 	{
@@ -8260,9 +7934,9 @@ UCHAR XG21GPIODataTransfer(UCHAR ujDate)
 /*      bl[1] : LVDS backlight                                                */
 /*      bl[0] : LVDS VDD                                                      */
 /*----------------------------------------------------------------------------*/
-UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_XG21GetPSCValue(struct vb_device_info *pVBInfo)
 {
-    UCHAR CR4A,temp;
+    unsigned char CR4A, temp;
 
     CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
     XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x23 ) ; /* enable GPIO write */
@@ -8281,9 +7955,9 @@ UCHAR XGI_XG21GetPSCValue(PVB_DEVICE_INFO pVBInfo)
 /*      bl[1] : LVDS backlight                                                */
 /*      bl[0] : LVDS VDD                                                      */
 /*----------------------------------------------------------------------------*/
-UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_XG27GetPSCValue(struct vb_device_info *pVBInfo)
 {
-    UCHAR CR4A,CRB4,temp;
+    unsigned char CR4A, CRB4, temp;
 
     CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
     XGINew_SetRegAND( pVBInfo->P3d4 , 0x4A , ~0x0C ) ; /* enable GPIO write */
@@ -8306,9 +7980,9 @@ UCHAR XGI_XG27GetPSCValue(PVB_DEVICE_INFO pVBInfo)
 /*          000010b : clear bit 1, to set bit1                                */
 /*          000001b : clear bit 0, to set bit0                                */
 /*----------------------------------------------------------------------------*/
-void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+void XGI_XG21BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo)
 {
-    UCHAR CR4A,temp;
+    unsigned char CR4A, temp;
 
     CR4A = XGINew_GetReg1( pVBInfo->P3d4 , 0x4A ) ;
     tempbh &= 0x23;
@@ -8331,10 +8005,10 @@ void XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
     XGINew_SetReg1( pVBInfo->P3d4 , 0x48 , temp ) ;
 }
 
-void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+void XGI_XG27BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo)
 {
-    UCHAR CR4A,temp;
-    USHORT tempbh0,tempbl0;
+    unsigned char CR4A, temp;
+    unsigned short tempbh0, tempbl0;
 
     tempbh0 = tempbh;
     tempbl0 = tempbl;
@@ -8362,15 +8036,13 @@ void XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
 }
 
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo)
+unsigned short XGI_GetLVDSOEMTableIndex(struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
     index = XGINew_GetReg1( pVBInfo->P3d4 , 0x36 ) ;
-    if (index<sizeof(XGI21_LCDCapList)/sizeof(XGI21_LVDSCapStruct))
-    {
-      return index;
-    }
+    if (index < sizeof(XGI21_LCDCapList)/sizeof(struct XGI21_LVDSCapStruct))
+	    return index;
     return 0;
 }
 
@@ -8384,9 +8056,9 @@ USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo)
 /* : bl : 3 ; T3 : the duration between CPL off and signal off */
 /* : bl : 4 ; T4 : the duration signal off and Vdd off */
 /* --------------------------------------------------------------------- */
-void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
+void XGI_XG21SetPanelDelay(unsigned short tempbl, struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
     index = XGI_GetLVDSOEMTableIndex( pVBInfo );
     if ( tempbl == 1 )
@@ -8402,9 +8074,11 @@ void XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo)
         XGINew_LCD_Wait_Time( pVBInfo->XG21_LVDSCapList[ index ].PSC_S4, pVBInfo ) ;
 }
 
-BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_XG21CheckLVDSMode(unsigned short ModeNo,
+				    unsigned short ModeIdIndex,
+				    struct vb_device_info *pVBInfo)
 {
-    USHORT xres ,
+    unsigned short xres ,
            yres ,
            colordepth ,
            modeflag ,
@@ -8445,10 +8119,10 @@ BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO
 
     lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
     if ( xres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSHDE) )
-      return FALSE;
+	    return 0;
 
     if ( yres > (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE) )
-      return FALSE;
+	    return 0;
 
     if ( ModeNo > 0x13 )
     {
@@ -8456,18 +8130,17 @@ BOOLEAN XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO
            ( yres != (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE)) )
       {
           colordepth = XGI_GetColorDepth( ModeNo , ModeIdIndex, pVBInfo ) ;
-          if ( colordepth > 2 )
-          {
-            return FALSE;
-          }
+	  if (colordepth > 2)
+		  return 0;
+
       }
     }
-    return TRUE;
+    return 1;
 }
 
-void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
+void XGI_SetXG21FPBits(struct vb_device_info *pVBInfo)
 {
-    UCHAR temp;
+    unsigned char temp;
 
     temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[0] 1: 18bit */
     temp = ( temp & 1 ) << 6;
@@ -8476,9 +8149,9 @@ void XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo)
 
 }
 
-void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
+void XGI_SetXG27FPBits(struct vb_device_info *pVBInfo)
 {
-    UCHAR temp;
+    unsigned char temp;
 
     temp = XGINew_GetReg1( pVBInfo->P3d4  , 0x37 ) ;  /* D[1:0] 01: 18bit, 00: dual 12, 10: single 24 */
     temp = ( temp & 3 ) << 6;
@@ -8487,27 +8160,28 @@ void XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo)
 
 }
 
-void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetXG21LVDSPara(unsigned short ModeNo, unsigned short ModeIdIndex,
+			 struct vb_device_info *pVBInfo)
 {
-    UCHAR temp,Miscdata;
-    USHORT xres ,
+    unsigned char temp, Miscdata;
+    unsigned short xres ,
            yres ,
            modeflag ,
            resindex ,
            lvdstableindex ;
-    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
-    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
-    USHORT value;
+    unsigned short LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    unsigned short LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    unsigned short value;
 
     lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
 
-    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp = (unsigned char) ((pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8)) >> 8);
     temp &= LCDPolarity;
-    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+    Miscdata = (unsigned char) XGINew_GetReg2(pVBInfo->P3cc) ;
 
     XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
 
-    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    temp = (unsigned char) (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity) ;
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
 
@@ -8563,7 +8237,7 @@ void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBIn
 
     LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
 
-    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    temp = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11) ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
 
     if (!( modeflag & Charx8Dot ))
@@ -8670,26 +8344,27 @@ void XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBIn
 }
 
 /* no shadow case */
-void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetXG27LVDSPara(unsigned short ModeNo, unsigned short ModeIdIndex,
+			 struct vb_device_info *pVBInfo)
 {
-    UCHAR temp,Miscdata;
-    USHORT xres ,
+    unsigned char temp, Miscdata;
+    unsigned short xres ,
            yres ,
            modeflag ,
            resindex ,
            lvdstableindex ;
-    USHORT LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
-    USHORT LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
-    USHORT value;
+    unsigned short LVDSHT,LVDSHBS,LVDSHRS,LVDSHRE,LVDSHBE;
+    unsigned short LVDSVT,LVDSVBS,LVDSVRS,LVDSVRE,LVDSVBE;
+    unsigned short value;
 
     lvdstableindex = XGI_GetLVDSOEMTableIndex( pVBInfo );
-    temp = (UCHAR) ( ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8 ) ) >> 8 );
+    temp = (unsigned char) ((pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & (LCDPolarity << 8)) >> 8);
     temp &= LCDPolarity;
-    Miscdata =(UCHAR) XGINew_GetReg2(pVBInfo->P3cc) ;
+    Miscdata = (unsigned char) XGINew_GetReg2(pVBInfo->P3cc);
 
     XGINew_SetReg3( pVBInfo->P3c2 , (Miscdata & 0x3F) | temp ) ;
 
-    temp = (UCHAR) ( pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity ) ;
+    temp = (unsigned char) (pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDS_Capability & LCDPolarity) ;
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x35 , ~0x80 , temp&0x80 ) ;      /* SR35[7] FP VSync polarity */
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x30 , ~0x20 , (temp&0x40)>>1 ) ;   /* SR30[5] FP HSync polarity */
 
@@ -8745,7 +8420,7 @@ void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBIn
 
     LVDSVBE = LVDSVBS + LVDSVT - pVBInfo->XG21_LVDSCapList[lvdstableindex].LVDSVDE ;
 
-    temp = ( UCHAR )XGINew_GetReg1( pVBInfo->P3d4 , 0x11 ) ;
+    temp = (unsigned char)XGINew_GetReg1(pVBInfo->P3d4, 0x11) ;
     XGINew_SetReg1( pVBInfo->P3d4 , 0x11 , temp & 0x7f ) ;		/* Unlock CRTC */
 
     if (!( modeflag & Charx8Dot ))
@@ -8853,21 +8528,21 @@ void XGI_SetXG27LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBIn
 /* --------------------------------------------------------------------- */
 /* Function : XGI_IsLCDON */
 /* Input : */
-/* Output : FALSE : Skip PSC Control */
-/* TRUE: Disable PSC */
+/* Output : 0 : Skip PSC Control */
+/* 1: Disable PSC */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_IsLCDON(struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ;
+    unsigned short tempax ;
 
     tempax = pVBInfo->VBInfo ;
     if ( tempax & SetCRT2ToDualEdge )
-        return FALSE ;
+	    return 0;
     else if ( tempax & ( DisableCRT2Display | SwitchToCRT2 | SetSimuScanMode ) )
-        return TRUE ;
+	    return 1;
 
-    return FALSE ;
+    return 0;
 }
 
 
@@ -8877,9 +8552,9 @@ BOOLEAN XGI_IsLCDON(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_EnablePWD(  PVB_DEVICE_INFO pVBInfo )
+void XGI_EnablePWD(struct vb_device_info *pVBInfo)
 {
-    USHORT index ,
+    unsigned short index ,
            temp ;
 
     index = XGI_GetLCDCapPtr(pVBInfo) ;
@@ -8899,7 +8574,7 @@ void XGI_EnablePWD(  PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo )
+void XGI_DisablePWD(struct vb_device_info *pVBInfo)
 {
     XGINew_SetRegAND( pVBInfo->Part4Port , 0x27 , 0x7F ) ;	/* disable PWD */
 }
@@ -8908,30 +8583,30 @@ void XGI_DisablePWD( PVB_DEVICE_INFO pVBInfo )
 /* --------------------------------------------------------------------- */
 /* Function : XGI_DisableChISLCD */
 /* Input : */
-/* Output : FALSE -> Not LCD Mode */
+/* Output : 0 -> Not LCD Mode */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_DisableChISLCD(struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            tempah ;
 
     tempbx = pVBInfo->SetFlag & ( DisableChA | DisableChB ) ;
-    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port  , 0x2E ) ) ;
+    tempah = ~((unsigned short) XGINew_GetReg1(pVBInfo->Part1Port, 0x2E));
 
     if ( tempbx & ( EnableChA | DisableChA ) )
     {
         if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
-            return FALSE ;
+		return 0 ;
     }
 
     if ( !( tempbx & ( EnableChB | DisableChB ) ) )
-        return FALSE ;
+	    return 0;
 
     if ( tempah & 0x01 )       /* Chk LCDB Mode */
-        return TRUE ;
+	    return 1;
 
-    return FALSE ;
+    return 0;
 }
 
 
@@ -8941,28 +8616,28 @@ BOOLEAN XGI_DisableChISLCD(PVB_DEVICE_INFO pVBInfo)
 /* Output : 0 -> Not LCD mode */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo)
+unsigned char XGI_EnableChISLCD(struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            tempah ;
 
 
     tempbx = pVBInfo->SetFlag & ( EnableChA | EnableChB ) ;
-    tempah = ~( ( USHORT )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
+    tempah = ~( (unsigned short)XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ) ;
 
     if ( tempbx & ( EnableChA | DisableChA ) )
     {
         if ( !( tempah & 0x08 ) )		/* Chk LCDA Mode */
-            return FALSE ;
+		return 0;
     }
 
     if ( !( tempbx & ( EnableChB | DisableChB ) ) )
-        return FALSE ;
+	    return 0;
 
     if ( tempah & 0x01 )       /* Chk LCDB Mode */
-        return TRUE ;
+	    return 1;
 
-    return FALSE ;
+    return 0;
 }
 
 
@@ -8972,9 +8647,9 @@ BOOLEAN XGI_EnableChISLCD(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetLCDCapPtr(  PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetLCDCapPtr(struct vb_device_info *pVBInfo)
 {
-    UCHAR tempal ,
+    unsigned char tempal ,
           tempah ,
           tempbl ,
           i ;
@@ -9011,9 +8686,9 @@ USHORT XGI_GetLCDCapPtr(  PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetLCDCapPtr1( PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetLCDCapPtr1(struct vb_device_info *pVBInfo)
 {
-    USHORT tempah ,
+    unsigned short tempah ,
            tempal ,
            tempbl ,
            i ;
@@ -9056,9 +8731,10 @@ USHORT XGI_GetLCDCapPtr1( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetLCDSync( USHORT* HSyncWidth , USHORT* VSyncWidth, PVB_DEVICE_INFO pVBInfo )
+void XGI_GetLCDSync(unsigned short *HSyncWidth , unsigned short *VSyncWidth,
+		    struct vb_device_info *pVBInfo)
 {
-    USHORT Index ;
+    unsigned short Index ;
 
     Index = XGI_GetLCDCapPtr(pVBInfo) ;
     *HSyncWidth = pVBInfo->LCDCapList[ Index ].LCD_HSyncWidth ;
@@ -9075,9 +8751,9 @@ void XGI_GetLCDSync( USHORT* HSyncWidth , USHORT* VSyncWidth, PVB_DEVICE_INFO pV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO pVBInfo)
+void XGI_EnableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbl ,
+    unsigned short tempbl ,
            tempah ;
 
     if ( pVBInfo->SetFlag == Win9xDOSMode )
@@ -9146,7 +8822,7 @@ void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO p
         {
             if ( ( pVBInfo->SetFlag & EnableChB ) || ( pVBInfo->VBInfo & ( SetCRT2ToLCD | SetCRT2ToTV | SetCRT2ToRAMDAC ) ) )
             {
-                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->P3c4 , 0x32 ) ;
+		tempah = (unsigned char)XGINew_GetReg1(pVBInfo->P3c4, 0x32);
                 tempah &= 0xDF;
                 if ( pVBInfo->VBInfo & SetInSlaveMode )
                 {
@@ -9156,8 +8832,7 @@ void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO p
                 XGINew_SetReg1( pVBInfo->P3c4 , 0x32 , tempah ) ;
                 XGINew_SetRegOR( pVBInfo->P3c4 , 0x1E , 0x20 ) ;
 
-
-                tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+		tempah = (unsigned char)XGINew_GetReg1(pVBInfo->Part1Port, 0x2E);
 
                 if ( !( tempah & 0x80 ) )
                     XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;   	/* BVBDOENABLE = 1 */
@@ -9238,7 +8913,7 @@ void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO p
 
 
 
-        tempah = ( UCHAR )XGINew_GetReg1( pVBInfo->Part1Port , 0x2E ) ;
+	tempah = (unsigned char)XGINew_GetReg1(pVBInfo->Part1Port, 0x2E);
         if ( !( tempah & 0x80 ) )
             XGINew_SetRegOR( pVBInfo->Part1Port , 0x2E , 0x80 ) ;	/* BVBDOENABLE = 1 */
 
@@ -9289,9 +8964,9 @@ void XGI_EnableBridge( PXGI_HW_DEVICE_INFO HwDeviceExtension , PVB_DEVICE_INFO p
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGI_DisableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
+    unsigned short tempax ,
            tempbx ,
            tempah = 0 ,
            tempbl = 0 ;
@@ -9470,9 +9145,9 @@ void XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pV
 /* A : Ext750p */
 /* B : St750p */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetTVPtrIndex(struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx = 0 ;
+    unsigned short tempbx = 0 ;
 
     if ( pVBInfo->TVInfo & SetPALTV )
         tempbx = 2 ;
@@ -9497,7 +9172,7 @@ USHORT XGI_GetTVPtrIndex(  PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : Customized Param. for 301 */
 /* --------------------------------------------------------------------- */
-void XGI_OEM310Setting( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+void XGI_OEM310Setting(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
     if ( pVBInfo->SetFlag & Win9xDOSMode )
         return ;
@@ -9527,11 +9202,11 @@ void XGI_OEM310Setting( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBI
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetDelayComp( PVB_DEVICE_INFO pVBInfo )
+void XGI_SetDelayComp(struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
-    UCHAR  tempah ,
+    unsigned char  tempah ,
            tempbl ,
            tempbh ;
 
@@ -9605,9 +9280,9 @@ void XGI_SetDelayComp( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
+void XGI_SetLCDCap(struct vb_device_info *pVBInfo)
 {
-    USHORT tempcx ;
+    unsigned short tempcx ;
 
     tempcx = pVBInfo->LCDCapList[ XGI_GetLCDCapPtr(pVBInfo) ].LCD_Capability ;
 
@@ -9616,10 +9291,12 @@ void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
         if ( pVBInfo->VBType & ( VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
         {        				/* 301LV/302LV only */
             /* Set 301LV Capability */
-            XGINew_SetReg1( pVBInfo->Part4Port , 0x24 , ( UCHAR )( tempcx & 0x1F ) ) ;
+		XGINew_SetReg1(pVBInfo->Part4Port, 0x24, (unsigned char)(tempcx & 0x1F));
 	}
         /* VB Driving */
-        XGINew_SetRegANDOR( pVBInfo->Part4Port , 0x0D , ~( ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) >> 8 ) , ( USHORT )( ( tempcx & ( EnableVBCLKDRVLOW | EnablePLLSPLOW ) ) >> 8 ) ) ;
+	XGINew_SetRegANDOR(pVBInfo->Part4Port, 0x0D,
+			   ~((EnableVBCLKDRVLOW | EnablePLLSPLOW) >> 8),
+			   (unsigned short)((tempcx & (EnableVBCLKDRVLOW | EnablePLLSPLOW)) >> 8));
     }
 
     if ( pVBInfo->VBType & ( VB_XGI301B | VB_XGI302B | VB_XGI301LV | VB_XGI302LV | VB_XGI301C ) )
@@ -9646,32 +9323,34 @@ void XGI_SetLCDCap( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+void XGI_SetLCDCap_A(unsigned short tempcx, struct vb_device_info *pVBInfo)
 {
-    USHORT temp ;
+    unsigned short temp ;
 
     temp = XGINew_GetReg1( pVBInfo->P3d4 , 0x37 ) ;
 
     if ( temp & LCDRGB18Bit )
     {
-        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x20 | ( tempcx & 0x00C0 ) ) ) ; /* Enable Dither */
+	XGINew_SetRegANDOR(pVBInfo->Part1Port, 0x19, 0x0F,
+			   (unsigned short)(0x20 | (tempcx & 0x00C0))); /* Enable Dither */
         XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x80 ) ;
     }
     else
     {
-        XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x19 , 0x0F , ( USHORT )( 0x30 | ( tempcx & 0x00C0 ) ) ) ;
+	XGINew_SetRegANDOR(pVBInfo->Part1Port, 0x19, 0x0F,
+			   (unsigned short)(0x30 | (tempcx & 0x00C0)));
         XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x1A , 0x7F , 0x00 ) ;
     }
 
 /*
     if ( tempcx & EnableLCD24bpp )	// 24bits
     {
-        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x30|(tempcx&0x00C0)) );
+	XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(unsigned short)(0x30|(tempcx&0x00C0)) );
         XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x00);
     }
     else
     {
-        XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(USHORT)(0x20|(tempcx&0x00C0)) );//Enable Dither
+	XGINew_SetRegANDOR(pVBInfo->Part1Port,0x19, 0x0F,(unsigned short)(0x20|(tempcx&0x00C0)) ); // Enable Dither
         XGINew_SetRegANDOR(pVBInfo->Part1Port,0x1A,0x7F,0x80);
     }
 */
@@ -9684,12 +9363,14 @@ void XGI_SetLCDCap_A(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
+void XGI_SetLCDCap_B(unsigned short tempcx, struct vb_device_info *pVBInfo)
 {
     if ( tempcx & EnableLCD24bpp )	/* 24bits */
-        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x0c ) ) ;
+	    XGINew_SetRegANDOR(pVBInfo->Part2Port, 0x1A, 0xE0,
+			       (unsigned short)(((tempcx & 0x00ff) >> 6) | 0x0c));
     else
-        XGINew_SetRegANDOR( pVBInfo->Part2Port , 0x1A , 0xE0 , ( USHORT )( ( ( tempcx & 0x00ff ) >> 6 ) | 0x18 ) ) ; /* Enable Dither */
+	    XGINew_SetRegANDOR(pVBInfo->Part2Port, 0x1A, 0xE0,
+			       (unsigned short)(((tempcx & 0x00ff) >> 6) | 0x18)); /* Enable Dither */
 }
 
 
@@ -9699,9 +9380,9 @@ void XGI_SetLCDCap_B(USHORT tempcx,PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void SetSpectrum( PVB_DEVICE_INFO pVBInfo )
+void SetSpectrum(struct vb_device_info *pVBInfo)
 {
-    USHORT index ;
+    unsigned short index ;
 
     index = XGI_GetLCDCapPtr(pVBInfo) ;
 
@@ -9725,12 +9406,13 @@ void SetSpectrum( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : Set TV Customized Param. */
 /* --------------------------------------------------------------------- */
-void XGI_SetAntiFlicker( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_SetAntiFlicker(unsigned short ModeNo, unsigned short ModeIdIndex,
+			struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            index ;
 
-    UCHAR tempah ;
+    unsigned char tempah ;
 
     if (pVBInfo->TVInfo & ( SetYPbPrMode525p | SetYPbPrMode750p ) )
         return ;
@@ -9761,12 +9443,12 @@ void XGI_SetAntiFlicker( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetEdgeEnhance( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pVBInfo)
+void XGI_SetEdgeEnhance(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            index ;
 
-    UCHAR tempah ;
+    unsigned char tempah ;
 
 
     tempbx = XGI_GetTVPtrIndex(pVBInfo ) ;
@@ -9795,22 +9477,26 @@ void XGI_SetEdgeEnhance( USHORT ModeNo , USHORT ModeIdIndex , PVB_DEVICE_INFO pV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetPhaseIncr( PVB_DEVICE_INFO pVBInfo )
+void XGI_SetPhaseIncr(struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ;
+    unsigned short tempbx ;
 
-    UCHAR tempcl ,
+    unsigned char tempcl ,
           tempch ;
 
-    ULONG tempData ;
+    unsigned long tempData ;
 
     XGI_GetTVPtrIndex2( &tempbx , &tempcl , &tempch, pVBInfo ) ; /* bx, cl, ch */
     tempData = TVPhaseList[ tempbx ] ;
 
-    XGINew_SetReg1( pVBInfo->Part2Port , 0x31 , ( USHORT )( tempData & 0x000000FF ) ) ;
-    XGINew_SetReg1( pVBInfo->Part2Port , 0x32 , ( USHORT )( ( tempData & 0x0000FF00 ) >> 8 ) ) ;
-    XGINew_SetReg1( pVBInfo->Part2Port , 0x33 , ( USHORT )( ( tempData & 0x00FF0000 ) >> 16 ) ) ;
-    XGINew_SetReg1( pVBInfo->Part2Port , 0x34 , ( USHORT )( ( tempData & 0xFF000000 ) >> 24 ) ) ;
+    XGINew_SetReg1(pVBInfo->Part2Port, 0x31,
+		   (unsigned short)(tempData & 0x000000FF));
+    XGINew_SetReg1(pVBInfo->Part2Port, 0x32,
+		   (unsigned short)((tempData & 0x0000FF00) >> 8));
+    XGINew_SetReg1(pVBInfo->Part2Port, 0x33,
+		   (unsigned short)((tempData & 0x00FF0000) >> 16));
+    XGINew_SetReg1(pVBInfo->Part2Port, 0x34,
+		   (unsigned short)((tempData & 0xFF000000) >> 24));
 }
 
 
@@ -9820,12 +9506,13 @@ void XGI_SetPhaseIncr( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_SetYFilter( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetYFilter(unsigned short ModeNo, unsigned short ModeIdIndex,
+		    struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ,
+    unsigned short tempbx ,
            index ;
 
-    UCHAR tempcl ,
+    unsigned char tempcl ,
           tempch ,
           tempal ,
           *filterPtr ;
@@ -9924,7 +9611,8 @@ void XGI_SetYFilter( USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo
 /* 1 : 301B/302B/301LV/302LV */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_INFO pVBInfo)
+void XGI_GetTVPtrIndex2(unsigned short *tempbx, unsigned char *tempcl,
+			unsigned char *tempch, struct vb_device_info *pVBInfo)
 {
     *tempbx = 0 ;
     *tempcl = 0 ;
@@ -9966,12 +9654,14 @@ void XGI_GetTVPtrIndex2(USHORT* tempbx,UCHAR* tempcl,UCHAR* tempch, PVB_DEVICE_I
 /* Output : */
 /* Description : Origin code for crt2group */
 /* --------------------------------------------------------------------- */
-void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo)
+void XGI_SetCRT2ModeRegs(unsigned short ModeNo,
+			 struct xgi_hw_device_info *HwDeviceExtension,
+			 struct vb_device_info *pVBInfo)
 {
-    USHORT tempbl ;
-    SHORT  tempcl ;
+    unsigned short tempbl ;
+    short  tempcl ;
 
-    UCHAR  tempah ;
+    unsigned char  tempah ;
 
     /* XGINew_SetReg1( pVBInfo->Part1Port , 0x03 , 0x00 ) ; // fix write part1 index 0 BTDRAM bit Bug */
     tempah=0;
@@ -10195,9 +9885,9 @@ void XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO HwDeviceExtension, PV
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_CloseCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+void XGI_CloseCRTC(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ;
+    unsigned short tempbx ;
 
     tempbx = 0 ;
 
@@ -10214,9 +9904,9 @@ void XGI_CloseCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBIn
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_OpenCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInfo )
+void XGI_OpenCRTC(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ;
+    unsigned short tempbx ;
 
     tempbx = 0 ;
 
@@ -10230,9 +9920,9 @@ void XGI_OpenCRTC( PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO pVBInf
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex, PVB_DEVICE_INFO pVBInfo )
+void XGI_GetRAMDAC2DATA(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT tempax ,
+    unsigned short tempax ,
            tempbx ,
            temp1 ,
            temp2 ,
@@ -10257,15 +9947,15 @@ void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateT
         modeflag = pVBInfo->EModeIDTable[ ModeIdIndex ].Ext_ModeFlag ;
         CRT1Index = pVBInfo->RefIndex[ RefreshRateTableIndex ].Ext_CRT1CRTC ;
         CRT1Index &= IndexMask ;
-        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 0 ] ;
-        temp2 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 5 ] ;
+	temp1 = (unsigned short)pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[0];
+	temp2 = (unsigned short)pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[5];
 	tempax = ( temp1 & 0xFF ) | ( ( temp2 & 0x03 ) << 8 ) ;
-        tempbx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 8 ] ;
-        tempcx = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 14 ] << 8 ;
+	tempbx = (unsigned short)pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[8];
+	tempcx = (unsigned short)pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[14] << 8;
 	tempcx &= 0x0100 ;
 	tempcx = tempcx << 2 ;
 	tempbx |= tempcx;
-        temp1 = ( USHORT )pVBInfo->XGINEWUB_CRT1Table[ CRT1Index ].CR[ 9 ] ;
+	temp1 = (unsigned short)pVBInfo->XGINEWUB_CRT1Table[CRT1Index].CR[9];
     }
 
     if ( temp1 & 0x01 )
@@ -10295,11 +9985,11 @@ void XGI_GetRAMDAC2DATA(USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateT
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetColorDepth(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo)
+unsigned short XGI_GetColorDepth(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo)
 {
-    USHORT ColorDepth[ 6 ] = { 1 , 2 , 4 , 4 , 6 , 8 } ;
-    SHORT  index ;
-    USHORT modeflag ;
+    unsigned short ColorDepth[ 6 ] = { 1 , 2 , 4 , 4 , 6 , 8 } ;
+    short index ;
+    unsigned short modeflag ;
 
     if ( ModeNo <= 0x13 )
     {
@@ -10326,7 +10016,7 @@ USHORT XGI_GetColorDepth(USHORT ModeNo , USHORT ModeIdIndex, PVB_DEVICE_INFO pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_UnLockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+void XGI_UnLockCRT2(struct xgi_hw_device_info *HwDeviceExtension,  struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2f , 0xFF , 0x01 ) ;
@@ -10340,7 +10030,7 @@ void XGI_UnLockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVB
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_LockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBInfo )
+void XGI_LockCRT2(struct xgi_hw_device_info *HwDeviceExtension,  struct vb_device_info *pVBInfo)
 {
 
     XGINew_SetRegANDOR( pVBInfo->Part1Port , 0x2F , 0xFE , 0x00 ) ;
@@ -10355,7 +10045,7 @@ void XGI_LockCRT2( PXGI_HW_DEVICE_INFO HwDeviceExtension,  PVB_DEVICE_INFO pVBIn
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_EnableCRT2( PVB_DEVICE_INFO pVBInfo)
+void XGINew_EnableCRT2(struct vb_device_info *pVBInfo)
 {
     XGINew_SetRegANDOR( pVBInfo->P3c4 , 0x1E , 0xFF , 0x20 ) ;
 }
@@ -10368,12 +10058,12 @@ void XGINew_EnableCRT2( PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo)
+void XGINew_LCD_Wait_Time(unsigned char DelayTime, struct vb_device_info *pVBInfo)
 {
-    USHORT i ,
+    unsigned short i ,
            j ;
 
-    ULONG temp ,
+    unsigned long temp ,
           flag ;
 
     flag = 0 ;
@@ -10405,9 +10095,9 @@ void XGINew_LCD_Wait_Time(UCHAR DelayTime, PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO pVBInfo )
+unsigned char XGI_BridgeIsOn(struct vb_device_info *pVBInfo)
 {
-    USHORT flag ;
+    unsigned short flag ;
 
     if ( pVBInfo->IF_DEF_LVDS == 1 )
     {
@@ -10431,9 +10121,9 @@ BOOLEAN XGI_BridgeIsOn( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_LongWait(PVB_DEVICE_INFO pVBInfo)
+void XGI_LongWait(struct vb_device_info *pVBInfo)
 {
-    USHORT i ;
+    unsigned short i ;
 
     i = XGINew_GetReg1( pVBInfo->P3c4 , 0x1F ) ;
 
@@ -10460,9 +10150,9 @@ void XGI_LongWait(PVB_DEVICE_INFO pVBInfo)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGI_VBLongWait( PVB_DEVICE_INFO pVBInfo )
+void XGI_VBLongWait(struct vb_device_info *pVBInfo)
 {
-    USHORT tempal ,
+    unsigned short tempal ,
            temp ,
            i ,
            j ;
@@ -10519,16 +10209,16 @@ return ;
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetVGAHT2( PVB_DEVICE_INFO pVBInfo )
+unsigned short XGI_GetVGAHT2(struct vb_device_info *pVBInfo)
 {
-    ULONG tempax ,
+    unsigned long tempax ,
           tempbx ;
 
     tempbx = ( ( pVBInfo->VGAVT - pVBInfo->VGAVDE ) * pVBInfo->RVBHCMAX ) & 0xFFFF ;
     tempax = ( pVBInfo->VT - pVBInfo->VDE ) * pVBInfo->RVBHCFACT ;
     tempax = ( tempax * pVBInfo->HT ) /tempbx ;
 
-    return( ( USHORT )tempax ) ;
+    return( (unsigned short)tempax ) ;
 }
 
 
@@ -10538,19 +10228,23 @@ USHORT XGI_GetVGAHT2( PVB_DEVICE_INFO pVBInfo )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-USHORT XGI_GetVCLK2Ptr( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateTableIndex , PXGI_HW_DEVICE_INFO HwDeviceExtension ,PVB_DEVICE_INFO pVBInfo)
+unsigned short XGI_GetVCLK2Ptr(unsigned short ModeNo,
+			       unsigned short ModeIdIndex,
+			       unsigned short RefreshRateTableIndex,
+			       struct xgi_hw_device_info *HwDeviceExtension,
+			       struct vb_device_info *pVBInfo)
 {
-    USHORT tempbx ;
+    unsigned short tempbx ;
 
-    USHORT LCDXlat1VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
-    USHORT LCDXlat2VCLK[ 4 ] = { VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 } ;
-    USHORT LVDSXlat1VCLK[ 4 ] = { VCLK40 , VCLK40 , VCLK40 , VCLK40 } ;
-    USHORT LVDSXlat2VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
-    USHORT LVDSXlat3VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    unsigned short LCDXlat1VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    unsigned short LCDXlat2VCLK[ 4 ] = { VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 , VCLK108_2 + 5 } ;
+    unsigned short LVDSXlat1VCLK[ 4 ] = { VCLK40 , VCLK40 , VCLK40 , VCLK40 } ;
+    unsigned short LVDSXlat2VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
+    unsigned short LVDSXlat3VCLK[ 4 ] = { VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 , VCLK65 + 2 } ;
 
-    USHORT CRT2Index , VCLKIndex ;
-    USHORT modeflag , resinfo ;
-    UCHAR *CHTVVCLKPtr = NULL ;
+    unsigned short CRT2Index , VCLKIndex ;
+    unsigned short modeflag , resinfo ;
+    unsigned char *CHTVVCLKPtr = NULL ;
 
     if ( ModeNo <= 0x13 )
     {
@@ -10665,7 +10359,7 @@ USHORT XGI_GetVCLK2Ptr( USHORT ModeNo , USHORT ModeIdIndex , USHORT RefreshRateT
             }
             else
             {	/* for CRT2 */
-                VCLKIndex = ( UCHAR )XGINew_GetReg2( ( pVBInfo->P3ca + 0x02 ) ) ;	/* Port 3cch */
+		VCLKIndex = (unsigned char)XGINew_GetReg2((pVBInfo->P3ca + 0x02));	/* Port 3cch */
 		VCLKIndex = ( ( VCLKIndex >> 2 ) & 0x03 ) ;
                 if ( ModeNo > 0x13 )
                 {
diff --git a/drivers/staging/xgifb/vb_setmode.h b/drivers/staging/xgifb/vb_setmode.h
index 09753d70666..0dcc2979617 100644
--- a/drivers/staging/xgifb/vb_setmode.h
+++ b/drivers/staging/xgifb/vb_setmode.h
@@ -1,40 +1,42 @@
 #ifndef  _VBSETMODE_
 #define  _VBSETMODE_
 
-extern   void     InitTo330Pointer(UCHAR,PVB_DEVICE_INFO);
-extern   void     XGI_UnLockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_LockCRT2(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_LongWait( PVB_DEVICE_INFO );
-extern   void     XGI_SetCRT2ModeRegs(USHORT ModeNo,PXGI_HW_DEVICE_INFO,  PVB_DEVICE_INFO  );
-extern   void     XGI_DisableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void  	  XGI_EnableBridge(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_DisplayOff( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
-extern   void     XGI_DisplayOn( PXGI_HW_DEVICE_INFO, PVB_DEVICE_INFO );
-extern   void     XGI_GetVBType(PVB_DEVICE_INFO);
-extern   void     XGI_SenseCRT1(PVB_DEVICE_INFO );
-extern   void     XGI_GetVGAType(PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_GetVBInfo(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_GetTVInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
-extern   void     XGI_SetCRT1Offset(USHORT ModeNo,USHORT ModeIdIndex,USHORT RefreshRateTableIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_SetLCDAGroup(USHORT ModeNo,USHORT ModeIdIndex,PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO );
-extern   void     XGI_WaitDisply( PVB_DEVICE_INFO );
-extern   USHORT   XGI_GetResInfo(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo);
+extern   void     InitTo330Pointer(unsigned char, struct vb_device_info *);
+extern   void     XGI_UnLockCRT2(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_LockCRT2(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_LongWait(struct vb_device_info *);
+extern   void     XGI_SetCRT2ModeRegs(unsigned short ModeNo,
+				      struct xgi_hw_device_info *,
+				      struct vb_device_info *);
+extern   void     XGI_DisableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_EnableBridge(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_DisplayOff(struct xgi_hw_device_info *, struct vb_device_info *);
+extern   void     XGI_DisplayOn(struct xgi_hw_device_info *, struct vb_device_info *);
+extern   void     XGI_GetVBType(struct vb_device_info *);
+extern   void     XGI_SenseCRT1(struct vb_device_info *);
+extern   void     XGI_GetVGAType(struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_GetVBInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_GetTVInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *);
+extern   void     XGI_SetCRT1Offset(unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefreshRateTableIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_SetLCDAGroup(unsigned short ModeNo, unsigned short ModeIdIndex, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   void     XGI_WaitDisply(struct vb_device_info *);
+extern   unsigned short   XGI_GetResInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
 
-extern   BOOLEAN  XGISetModeNew( PXGI_HW_DEVICE_INFO HwDeviceExtension , USHORT ModeNo ) ;
+extern   unsigned char  XGISetModeNew(struct xgi_hw_device_info *HwDeviceExtension, unsigned short ModeNo) ;
 
-extern   BOOLEAN  XGI_SearchModeID( USHORT ModeNo,USHORT  *ModeIdIndex, PVB_DEVICE_INFO );
-extern   BOOLEAN  XGI_GetLCDInfo(USHORT ModeNo,USHORT ModeIdIndex,PVB_DEVICE_INFO );
-extern   BOOLEAN  XGI_BridgeIsOn( PVB_DEVICE_INFO );
-extern   BOOLEAN  XGI_SetCRT2Group301(USHORT ModeNo, PXGI_HW_DEVICE_INFO HwDeviceExtension, PVB_DEVICE_INFO);
-extern   USHORT   XGI_GetRatePtrCRT2( PXGI_HW_DEVICE_INFO pXGIHWDE, USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO );
+extern   unsigned char  XGI_SearchModeID(unsigned short ModeNo, unsigned short  *ModeIdIndex, struct vb_device_info *);
+extern   unsigned char  XGI_GetLCDInfo(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *);
+extern   unsigned char  XGI_BridgeIsOn(struct vb_device_info *);
+extern   unsigned char  XGI_SetCRT2Group301(unsigned short ModeNo, struct xgi_hw_device_info *HwDeviceExtension, struct vb_device_info *);
+extern   unsigned short   XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE, unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *);
 
-extern   void     XGI_SetXG21FPBits(PVB_DEVICE_INFO pVBInfo);
-extern   void     XGI_SetXG27FPBits(PVB_DEVICE_INFO pVBInfo);
-extern   void     XGI_XG21BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-extern   void     XGI_XG27BLSignalVDD(USHORT tempbh,USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-extern   void     XGI_XG21SetPanelDelay(USHORT tempbl, PVB_DEVICE_INFO pVBInfo);
-extern   BOOLEAN  XGI_XG21CheckLVDSMode(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
-extern   void     XGI_SetXG21LVDSPara(USHORT ModeNo,USHORT ModeIdIndex, PVB_DEVICE_INFO pVBInfo );
-extern   USHORT XGI_GetLVDSOEMTableIndex(PVB_DEVICE_INFO pVBInfo);
+extern   void     XGI_SetXG21FPBits(struct vb_device_info *pVBInfo);
+extern   void     XGI_SetXG27FPBits(struct vb_device_info *pVBInfo);
+extern   void     XGI_XG21BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo);
+extern   void     XGI_XG27BLSignalVDD(unsigned short tempbh, unsigned short tempbl, struct vb_device_info *pVBInfo);
+extern   void     XGI_XG21SetPanelDelay(unsigned short tempbl, struct vb_device_info *pVBInfo);
+extern   unsigned char  XGI_XG21CheckLVDSMode(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+extern   void     XGI_SetXG21LVDSPara(unsigned short ModeNo, unsigned short ModeIdIndex, struct vb_device_info *pVBInfo);
+extern   unsigned short XGI_GetLVDSOEMTableIndex(struct vb_device_info *pVBInfo);
 
 #endif
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index bb25c0e2785..9c6e0c7ac78 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -10,525 +10,518 @@
 
 
 
-typedef struct _XGI_PanelDelayTblStruct
+struct XGI_PanelDelayTblStruct
 {
- UCHAR timer[2];
-} XGI_PanelDelayTblStruct;
+ unsigned char timer[2];
+};
 
-typedef struct _XGI_LCDDataStruct
+struct XGI_LCDDataStruct
 {
- USHORT RVBHCMAX;
- USHORT RVBHCFACT;
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT LCDHT;
- USHORT LCDVT;
-} XGI_LCDDataStruct;
+ unsigned short RVBHCMAX;
+ unsigned short RVBHCFACT;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short LCDHT;
+ unsigned short LCDVT;
+};
 
 
-typedef struct _XGI_LVDSCRT1HDataStruct
+struct XGI_LVDSCRT1HDataStruct
 {
- UCHAR Reg[8];
-} XGI_LVDSCRT1HDataStruct;
-typedef struct _XGI_LVDSCRT1VDataStruct
-{
- UCHAR Reg[7];
-} XGI_LVDSCRT1VDataStruct;
-
-
-typedef struct _XGI_TVDataStruct
-{
- USHORT RVBHCMAX;
- USHORT RVBHCFACT;
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT TVHDE;
- USHORT TVVDE;
- USHORT RVBHRS;
- UCHAR FlickerMode;
- USHORT HALFRVBHRS;
- UCHAR RY1COE;
- UCHAR RY2COE;
- UCHAR RY3COE;
- UCHAR RY4COE;
-} XGI_TVDataStruct;
-
-typedef struct _XGI_LVDSDataStruct
-{
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT LCDHT;
- USHORT LCDVT;
-} XGI_LVDSDataStruct;
-
-typedef struct _XGI_LVDSDesStruct
-{
- USHORT LCDHDES;
- USHORT LCDVDES;
-} XGI_LVDSDesStruct;
-
-typedef struct _XGI_LVDSCRT1DataStruct
-{
- UCHAR CR[15];
-} XGI_LVDSCRT1DataStruct;
-
-/*add for LCDA*/
+ unsigned char Reg[8];
+};
 
-
-typedef struct _XGI_StStruct
-{
- UCHAR St_ModeID;
- USHORT St_ModeFlag;
- UCHAR St_StTableIndex;
- UCHAR St_CRT2CRTC;
- UCHAR St_CRT2CRTC2;
- UCHAR St_ResInfo;
- UCHAR VB_StTVFlickerIndex;
- UCHAR VB_StTVEdgeIndex;
- UCHAR VB_StTVYFilterIndex;
-} XGI_StStruct;
-
-typedef struct _XGI_StandTableStruct
-{
- UCHAR CRT_COLS;
- UCHAR ROWS;
- UCHAR CHAR_HEIGHT;
- USHORT CRT_LEN;
- UCHAR SR[4];
- UCHAR MISC;
- UCHAR CRTC[0x19];
- UCHAR ATTR[0x14];
- UCHAR GRC[9];
-} XGI_StandTableStruct;
-
-typedef struct _XGI_ExtStruct
-{
- UCHAR Ext_ModeID;
- USHORT Ext_ModeFlag;
- USHORT Ext_ModeInfo;
- USHORT Ext_Point;
- USHORT Ext_VESAID;
- UCHAR Ext_VESAMEMSize;
- UCHAR Ext_RESINFO;
- UCHAR VB_ExtTVFlickerIndex;
- UCHAR VB_ExtTVEdgeIndex;
- UCHAR VB_ExtTVYFilterIndex;
- UCHAR REFindex;
-} XGI_ExtStruct;
-
-typedef struct _XGI_Ext2Struct
+struct XGI_LVDSCRT1VDataStruct
 {
- USHORT Ext_InfoFlag;
- UCHAR Ext_CRT1CRTC;
- UCHAR Ext_CRTVCLK;
- UCHAR Ext_CRT2CRTC;
- UCHAR Ext_CRT2CRTC2;
- UCHAR  ModeID;
- USHORT XRes;
- USHORT YRes;
- /* USHORT ROM_OFFSET; */
-} XGI_Ext2Struct;
-
+ unsigned char Reg[7];
+};
 
-typedef struct _XGI_MCLKDataStruct
-{
- UCHAR SR28,SR29,SR2A;
- USHORT CLOCK;
-} XGI_MCLKDataStruct;
 
-typedef struct _XGI_ECLKDataStruct
+struct XGI_TVDataStruct
 {
- UCHAR SR2E,SR2F,SR30;
- USHORT CLOCK;
-} XGI_ECLKDataStruct;
+ unsigned short RVBHCMAX;
+ unsigned short RVBHCFACT;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short TVHDE;
+ unsigned short TVVDE;
+ unsigned short RVBHRS;
+ unsigned char FlickerMode;
+ unsigned short HALFRVBHRS;
+ unsigned char RY1COE;
+ unsigned char RY2COE;
+ unsigned char RY3COE;
+ unsigned char RY4COE;
+};
 
-typedef struct _XGI_VCLKDataStruct
+struct XGI_LVDSDataStruct
 {
- UCHAR SR2B,SR2C;
- USHORT CLOCK;
-} XGI_VCLKDataStruct;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short LCDHT;
+ unsigned short LCDVT;
+};
 
-typedef struct _XGI_VBVCLKDataStruct
+struct XGI_LVDSDesStruct
 {
- UCHAR Part4_A,Part4_B;
- USHORT CLOCK;
-} XGI_VBVCLKDataStruct;
+ unsigned short LCDHDES;
+ unsigned short LCDVDES;
+};
 
-typedef struct _XGI_StResInfoStruct
+struct XGI_LVDSCRT1DataStruct
 {
- USHORT HTotal;
- USHORT VTotal;
-} XGI_StResInfoStruct;
+ unsigned char CR[15];
+};
 
-typedef struct _XGI_ModeResInfoStruct
-{
- USHORT HTotal;
- USHORT VTotal;
- UCHAR  XChar;
- UCHAR  YChar;
-} XGI_ModeResInfoStruct;
+/*add for LCDA*/
 
-typedef struct _XGI_LCDNBDesStruct
-{
-  UCHAR NB[12];
-} XGI_LCDNBDesStruct;
+struct XGI_StStruct
+{
+ unsigned char St_ModeID;
+ unsigned short St_ModeFlag;
+ unsigned char St_StTableIndex;
+ unsigned char St_CRT2CRTC;
+ unsigned char St_CRT2CRTC2;
+ unsigned char St_ResInfo;
+ unsigned char VB_StTVFlickerIndex;
+ unsigned char VB_StTVEdgeIndex;
+ unsigned char VB_StTVYFilterIndex;
+};
+
+struct XGI_StandTableStruct
+{
+ unsigned char CRT_COLS;
+ unsigned char ROWS;
+ unsigned char CHAR_HEIGHT;
+ unsigned short CRT_LEN;
+ unsigned char SR[4];
+ unsigned char MISC;
+ unsigned char CRTC[0x19];
+ unsigned char ATTR[0x14];
+ unsigned char GRC[9];
+};
+
+struct XGI_ExtStruct
+{
+ unsigned char Ext_ModeID;
+ unsigned short Ext_ModeFlag;
+ unsigned short Ext_ModeInfo;
+ unsigned short Ext_Point;
+ unsigned short Ext_VESAID;
+ unsigned char Ext_VESAMEMSize;
+ unsigned char Ext_RESINFO;
+ unsigned char VB_ExtTVFlickerIndex;
+ unsigned char VB_ExtTVEdgeIndex;
+ unsigned char VB_ExtTVYFilterIndex;
+ unsigned char REFindex;
+};
+
+struct XGI_Ext2Struct
+{
+ unsigned short Ext_InfoFlag;
+ unsigned char Ext_CRT1CRTC;
+ unsigned char Ext_CRTVCLK;
+ unsigned char Ext_CRT2CRTC;
+ unsigned char Ext_CRT2CRTC2;
+ unsigned char  ModeID;
+ unsigned short XRes;
+ unsigned short YRes;
+ /* unsigned short ROM_OFFSET; */
+};
+
+
+struct XGI_MCLKDataStruct
+{
+ unsigned char SR28, SR29, SR2A;
+ unsigned short CLOCK;
+};
+
+struct XGI_ECLKDataStruct
+{
+ unsigned char SR2E, SR2F, SR30;
+ unsigned short CLOCK;
+};
+
+struct XGI_VCLKDataStruct
+{
+ unsigned char SR2B, SR2C;
+ unsigned short CLOCK;
+};
+
+struct XGI_VBVCLKDataStruct
+{
+ unsigned char Part4_A, Part4_B;
+ unsigned short CLOCK;
+};
+
+struct XGI_StResInfoStruct
+{
+ unsigned short HTotal;
+ unsigned short VTotal;
+};
+
+struct XGI_ModeResInfoStruct
+{
+ unsigned short HTotal;
+ unsigned short VTotal;
+ unsigned char  XChar;
+ unsigned char  YChar;
+};
+
+struct XGI_LCDNBDesStruct
+{
+  unsigned char NB[12];
+};
  /*add for new UNIVGABIOS*/
-typedef struct _XGI_LCDDesStruct
+struct XGI_LCDDesStruct
 {
- USHORT LCDHDES;
- USHORT LCDHRS;
- USHORT LCDVDES;
- USHORT LCDVRS;
-} XGI_LCDDesStruct;
+ unsigned short LCDHDES;
+ unsigned short LCDHRS;
+ unsigned short LCDVDES;
+ unsigned short LCDVRS;
+};
 
-typedef struct _XGI_LCDDataTablStruct
+struct XGI_LCDDataTablStruct
 {
- UCHAR  PANELID;
- USHORT MASK;
- USHORT CAP;
- USHORT DATAPTR;
-} XGI_LCDDataTablStruct;
+ unsigned char  PANELID;
+ unsigned short MASK;
+ unsigned short CAP;
+ unsigned short DATAPTR;
+};
 
-typedef struct _XGI_TVTablDataStruct
+struct XGI_TVTablDataStruct
 {
- USHORT MASK;
- USHORT CAP;
- USHORT DATAPTR;
-} XGI_TVDataTablStruct;
+ unsigned short MASK;
+ unsigned short CAP;
+ unsigned short DATAPTR;
+};
 
-typedef struct _XGI330_LCDDesDataStruct
+struct XGI330_LCDDataDesStruct
 {
- USHORT LCDHDES;
- USHORT LCDHRS;
- USHORT LCDVDES;
- USHORT LCDVRS;
-} XGI330_LCDDataDesStruct;
+ unsigned short LCDHDES;
+ unsigned short LCDHRS;
+ unsigned short LCDVDES;
+ unsigned short LCDVRS;
+};
 
 
-typedef struct _XGI330_LVDSDataStruct
+struct XGI330_LVDSDataStruct
 {
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT LCDHT;
- USHORT LCDVT;
-} XGI330_LVDSDataStruct;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short LCDHT;
+ unsigned short LCDVT;
+};
 
-typedef struct _XGI330_LCDDesDataStruct2
+struct XGI330_LCDDataDesStruct2
 {
- USHORT LCDHDES;
- USHORT LCDHRS;
- USHORT LCDVDES;
- USHORT LCDVRS;
- USHORT LCDHSync;
- USHORT LCDVSync;
-} XGI330_LCDDataDesStruct2;
+ unsigned short LCDHDES;
+ unsigned short LCDHRS;
+ unsigned short LCDVDES;
+ unsigned short LCDVRS;
+ unsigned short LCDHSync;
+ unsigned short LCDVSync;
+};
 
-typedef struct _XGI330_LCDDataStruct
+struct XGI330_LCDDataStruct
 {
- USHORT RVBHCMAX;
- USHORT RVBHCFACT;
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT LCDHT;
- USHORT LCDVT;
-} XGI330_LCDDataStruct;
+ unsigned short RVBHCMAX;
+ unsigned short RVBHCFACT;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short LCDHT;
+ unsigned short LCDVT;
+};
 
 
-typedef struct _XGI330_TVDataStruct
+struct XGI330_TVDataStruct
 {
- USHORT RVBHCMAX;
- USHORT RVBHCFACT;
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT TVHDE;
- USHORT TVVDE;
- USHORT RVBHRS;
- UCHAR FlickerMode;
- USHORT HALFRVBHRS;
-} XGI330_TVDataStruct;
-
-typedef struct _XGI330_LCDDataTablStruct
-{
- UCHAR  PANELID;
- USHORT MASK;
- USHORT CAP;
- USHORT DATAPTR;
-} XGI330_LCDDataTablStruct;
-
-typedef struct _XGI330_TVDataTablStruct
-{
- USHORT MASK;
- USHORT CAP;
- USHORT DATAPTR;
-} XGI330_TVDataTablStruct;
-
-
-typedef struct _XGI330_CHTVDataStruct
-{
- USHORT VGAHT;
- USHORT VGAVT;
- USHORT LCDHT;
- USHORT LCDVT;
-} XGI330_CHTVDataStruct;
+ unsigned short RVBHCMAX;
+ unsigned short RVBHCFACT;
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short TVHDE;
+ unsigned short TVVDE;
+ unsigned short RVBHRS;
+ unsigned char FlickerMode;
+ unsigned short HALFRVBHRS;
+};
+
+struct XGI330_LCDDataTablStruct
+{
+ unsigned char  PANELID;
+ unsigned short MASK;
+ unsigned short CAP;
+ unsigned short DATAPTR;
+};
+
+struct XGI330_TVDataTablStruct
+{
+ unsigned short MASK;
+ unsigned short CAP;
+ unsigned short DATAPTR;
+};
+
+
+struct XGI330_CHTVDataStruct
+{
+ unsigned short VGAHT;
+ unsigned short VGAVT;
+ unsigned short LCDHT;
+ unsigned short LCDVT;
+};
 
-typedef struct _XGI_TimingHStruct
-{
-  UCHAR data[8];
-} XGI_TimingHStruct;
-
-typedef struct _XGI_TimingVStruct
-{
-  UCHAR data[7];
-} XGI_TimingVStruct;
-
-typedef struct _XGI_CH7007TV_TimingHStruct
-{
-  UCHAR data[10];
-} XGI_CH7007TV_TimingHStruct;
-
-typedef struct _XGI_CH7007TV_TimingVStruct
-{
-  UCHAR data[10];
-} XGI_CH7007TV_TimingVStruct;
-
-typedef struct _XGI_XG21CRT1Struct
-{
- UCHAR ModeID,CR02,CR03,CR15,CR16;
-} XGI_XG21CRT1Struct;
-
-typedef struct _XGI330_CHTVRegDataStruct
-{
- UCHAR Reg[16];
-} XGI330_CHTVRegDataStruct;
-
-typedef struct _XGI330_LCDCapStruct
-{
- 		UCHAR      LCD_ID;
-                USHORT     LCD_Capability;
-                UCHAR      LCD_SetFlag;
-                UCHAR      LCD_DelayCompensation;
-                UCHAR      LCD_HSyncWidth;
-                UCHAR      LCD_VSyncWidth;
-                UCHAR      LCD_VCLK;
-                UCHAR      LCDA_VCLKData1;
-                UCHAR      LCDA_VCLKData2;
-                UCHAR      LCUCHAR_VCLKData1;
-                UCHAR      LCUCHAR_VCLKData2;
-                UCHAR      PSC_S1;
-                UCHAR      PSC_S2;
-                UCHAR      PSC_S3;
-                UCHAR      PSC_S4;
-                UCHAR      PSC_S5;
-                UCHAR      PWD_2B;
-                UCHAR      PWD_2C;
-                UCHAR      PWD_2D;
-                UCHAR      PWD_2E;
-                UCHAR      PWD_2F;
-                UCHAR      Spectrum_31;
-                UCHAR      Spectrum_32;
-                UCHAR      Spectrum_33;
-                UCHAR      Spectrum_34;
-} XGI330_LCDCapStruct;
-
-typedef struct _XGI21_LVDSCapStruct
-{
-                USHORT     LVDS_Capability;
-                USHORT     LVDSHT;
-                USHORT     LVDSVT;
-                USHORT     LVDSHDE;
-                USHORT     LVDSVDE;
-                USHORT     LVDSHFP;
-                USHORT     LVDSVFP;
-                USHORT     LVDSHSYNC;
-                USHORT     LVDSVSYNC;
-                UCHAR      VCLKData1;
-                UCHAR      VCLKData2;
-                UCHAR      PSC_S1;
-                UCHAR      PSC_S2;
-                UCHAR      PSC_S3;
-                UCHAR      PSC_S4;
-                UCHAR      PSC_S5;
-} XGI21_LVDSCapStruct;
-
-typedef struct _XGI_CRT1TableStruct
-{
-  UCHAR CR[16];
-} XGI_CRT1TableStruct;
-
-
-typedef struct _XGI330_VCLKDataStruct
-{
-    UCHAR SR2B,SR2C;
-    USHORT CLOCK;
-} XGI330_VCLKDataStruct;
-
-typedef struct _XGI301C_Tap4TimingStruct
-{
-    USHORT DE;
-    UCHAR  Reg[64];   /* C0-FF */
-} XGI301C_Tap4TimingStruct;
-
-typedef struct _XGI_New_StandTableStruct
-{
-	UCHAR  CRT_COLS;
-	UCHAR  ROWS;
-	UCHAR  CHAR_HEIGHT;
-	USHORT CRT_LEN;
-	UCHAR  SR[4];
-	UCHAR  MISC;
-	UCHAR  CRTC[0x19];
-	UCHAR  ATTR[0x14];
-	UCHAR  GRC[9];
-} XGI_New_StandTableStruct;
-
-typedef UCHAR DRAM8Type[8];
-typedef UCHAR DRAM4Type[4];
-typedef UCHAR DRAM32Type[32];
-typedef UCHAR DRAM2Type[2];
-
-typedef struct _VB_DEVICE_INFO  VB_DEVICE_INFO;
-typedef VB_DEVICE_INFO *	PVB_DEVICE_INFO;
-
-struct _VB_DEVICE_INFO
-{
-    BOOLEAN  ISXPDOS;
-    ULONG   P3c4,P3d4,P3c0,P3ce,P3c2,P3cc;
-    ULONG   P3ca,P3c6,P3c7,P3c8,P3c9,P3da;
-    ULONG   Part0Port,Part1Port,Part2Port;
-    ULONG   Part3Port,Part4Port,Part5Port;
-    USHORT   RVBHCFACT,RVBHCMAX,RVBHRS;
-    USHORT   VGAVT,VGAHT,VGAVDE,VGAHDE;
-    USHORT   VT,HT,VDE,HDE;
-    USHORT   LCDHRS,LCDVRS,LCDHDES,LCDVDES;
-
-    USHORT   ModeType;
-    USHORT   IF_DEF_LVDS,IF_DEF_TRUMPION,IF_DEF_DSTN;/* ,IF_DEF_FSTN; add for dstn */
-    USHORT   IF_DEF_CRT2Monitor,IF_DEF_VideoCapture;
-    USHORT   IF_DEF_LCDA,IF_DEF_CH7017,IF_DEF_YPbPr,IF_DEF_ScaleLCD,IF_DEF_OEMUtil,IF_DEF_PWD;
-    USHORT   IF_DEF_ExpLink;
-    USHORT   IF_DEF_CH7005,IF_DEF_HiVision;
-    USHORT   IF_DEF_CH7007; /* Billy 2007/05/03 */
-    USHORT   LCDResInfo,LCDTypeInfo, VBType;/*301b*/
-    USHORT   VBInfo,TVInfo,LCDInfo, Set_VGAType;
-    USHORT   VBExtInfo;/*301lv*/
-    USHORT   SetFlag;
-    USHORT   NewFlickerMode;
-    USHORT   SelectCRT2Rate;
-
-    PUCHAR ROMAddr;
-    PUCHAR FBAddr;
-    ULONG BaseAddr;
-    ULONG RelIO;
-
-    DRAM4Type  *CR6B;
-    DRAM4Type  *CR6E;
-    DRAM32Type *CR6F;
-    DRAM2Type  *CR89;
-
-    DRAM8Type  *SR15; /* pointer : point to array */
-    DRAM8Type  *CR40;
-    UCHAR  *pSoftSetting;
-    UCHAR  *pOutputSelect;
-
-    USHORT *pRGBSenseData;
-    USHORT *pRGBSenseData2; /*301b*/
-    USHORT *pVideoSenseData;
-    USHORT *pVideoSenseData2;
-    USHORT *pYCSenseData;
-    USHORT *pYCSenseData2;
-
-    UCHAR  *pSR07;
-    UCHAR  *CR49;
-    UCHAR  *pSR1F;
-    UCHAR  *AGPReg;
-    UCHAR  *SR16;
-    UCHAR  *pSR21;
-    UCHAR  *pSR22;
-    UCHAR  *pSR23;
-    UCHAR  *pSR24;
-    UCHAR  *SR25;
-    UCHAR  *pSR31;
-    UCHAR  *pSR32;
-    UCHAR  *pSR33;
-    UCHAR  *pSR36;      /* alan 12/07/2006 */
-    UCHAR  *pCRCF;
-    UCHAR  *pCRD0;      /* alan 12/07/2006 */
-    UCHAR  *pCRDE;      /* alan 12/07/2006 */
-    UCHAR  *pCR8F;      /* alan 12/07/2006 */
-    UCHAR  *pSR40;      /* alan 12/07/2006 */
-    UCHAR  *pSR41;      /* alan 12/07/2006 */
-    UCHAR  *pDVOSetting;
-    UCHAR  *pCR2E;
-    UCHAR  *pCR2F;
-    UCHAR  *pCR46;
-    UCHAR  *pCR47;
-    UCHAR  *pCRT2Data_1_2;
-    UCHAR  *pCRT2Data_4_D;
-    UCHAR  *pCRT2Data_4_E;
-    UCHAR  *pCRT2Data_4_10;
-    XGI_MCLKDataStruct  *MCLKData;
-    XGI_ECLKDataStruct  *ECLKData;
-
-    UCHAR   *XGI_TVDelayList;
-    UCHAR   *XGI_TVDelayList2;
-    UCHAR   *CHTVVCLKUNTSC;
-    UCHAR   *CHTVVCLKONTSC;
-    UCHAR   *CHTVVCLKUPAL;
-    UCHAR   *CHTVVCLKOPAL;
-    UCHAR   *NTSCTiming;
-    UCHAR   *PALTiming;
-    UCHAR   *HiTVExtTiming;
-    UCHAR   *HiTVSt1Timing;
-    UCHAR   *HiTVSt2Timing;
-    UCHAR   *HiTVTextTiming;
-    UCHAR   *YPbPr750pTiming;
-    UCHAR   *YPbPr525pTiming;
-    UCHAR   *YPbPr525iTiming;
-    UCHAR   *HiTVGroup3Data;
-    UCHAR   *HiTVGroup3Simu;
-    UCHAR   *HiTVGroup3Text;
-    UCHAR   *Ren525pGroup3;
-    UCHAR   *Ren750pGroup3;
-    UCHAR   *ScreenOffset;
-    UCHAR   *pXGINew_DRAMTypeDefinition;
-    UCHAR   *pXGINew_I2CDefinition ;
-    UCHAR   *pXGINew_CR97 ;
-
-    XGI330_LCDCapStruct  *LCDCapList;
-    XGI21_LVDSCapStruct  *XG21_LVDSCapList;
-
-    XGI_TimingHStruct  *TimingH;
-    XGI_TimingVStruct  *TimingV;
-
-    XGI_StStruct          *SModeIDTable;
-    XGI_StandTableStruct  *StandTable;
-    XGI_ExtStruct         *EModeIDTable;
-    XGI_Ext2Struct        *RefIndex;
+struct XGI_TimingHStruct
+{
+  unsigned char data[8];
+};
+
+struct XGI_TimingVStruct
+{
+  unsigned char data[7];
+};
+
+struct XGI_CH7007TV_TimingHStruct
+{
+  unsigned char data[10];
+};
+
+struct XGI_CH7007TV_TimingVStruct
+{
+  unsigned char data[10];
+};
+
+struct XGI_XG21CRT1Struct
+{
+ unsigned char ModeID, CR02, CR03, CR15, CR16;
+};
+
+struct XGI330_CHTVRegDataStruct
+{
+ unsigned char Reg[16];
+};
+
+struct XGI330_LCDCapStruct
+{
+		unsigned char	   LCD_ID;
+		unsigned short	   LCD_Capability;
+		unsigned char	   LCD_SetFlag;
+		unsigned char	   LCD_DelayCompensation;
+		unsigned char	   LCD_HSyncWidth;
+		unsigned char	   LCD_VSyncWidth;
+		unsigned char	   LCD_VCLK;
+		unsigned char	   LCDA_VCLKData1;
+		unsigned char	   LCDA_VCLKData2;
+		unsigned char	   LCUCHAR_VCLKData1;
+		unsigned char	   LCUCHAR_VCLKData2;
+		unsigned char	   PSC_S1;
+		unsigned char	   PSC_S2;
+		unsigned char	   PSC_S3;
+		unsigned char	   PSC_S4;
+		unsigned char	   PSC_S5;
+		unsigned char	   PWD_2B;
+		unsigned char	   PWD_2C;
+		unsigned char	   PWD_2D;
+		unsigned char	   PWD_2E;
+		unsigned char	   PWD_2F;
+		unsigned char	   Spectrum_31;
+		unsigned char	   Spectrum_32;
+		unsigned char	   Spectrum_33;
+		unsigned char	   Spectrum_34;
+};
+
+struct XGI21_LVDSCapStruct
+{
+		unsigned short	   LVDS_Capability;
+		unsigned short	   LVDSHT;
+		unsigned short	   LVDSVT;
+		unsigned short	   LVDSHDE;
+		unsigned short	   LVDSVDE;
+		unsigned short	   LVDSHFP;
+		unsigned short	   LVDSVFP;
+		unsigned short	   LVDSHSYNC;
+		unsigned short	   LVDSVSYNC;
+		unsigned char	   VCLKData1;
+		unsigned char	   VCLKData2;
+		unsigned char	   PSC_S1;
+		unsigned char	   PSC_S2;
+		unsigned char	   PSC_S3;
+		unsigned char	   PSC_S4;
+		unsigned char	   PSC_S5;
+};
+
+struct XGI_CRT1TableStruct
+{
+  unsigned char CR[16];
+};
+
+
+struct XGI330_VCLKDataStruct
+{
+    unsigned char SR2B, SR2C;
+    unsigned short CLOCK;
+};
+
+struct XGI301C_Tap4TimingStruct
+{
+    unsigned short DE;
+    unsigned char  Reg[64];   /* C0-FF */
+};
+
+struct XGI_New_StandTableStruct
+{
+	unsigned char  CRT_COLS;
+	unsigned char  ROWS;
+	unsigned char  CHAR_HEIGHT;
+	unsigned short CRT_LEN;
+	unsigned char  SR[4];
+	unsigned char  MISC;
+	unsigned char  CRTC[0x19];
+	unsigned char  ATTR[0x14];
+	unsigned char  GRC[9];
+};
+
+struct vb_device_info
+{
+    unsigned char  ISXPDOS;
+    unsigned long   P3c4,P3d4,P3c0,P3ce,P3c2,P3cc;
+    unsigned long   P3ca,P3c6,P3c7,P3c8,P3c9,P3da;
+    unsigned long   Part0Port,Part1Port,Part2Port;
+    unsigned long   Part3Port,Part4Port,Part5Port;
+    unsigned short   RVBHCFACT,RVBHCMAX,RVBHRS;
+    unsigned short   VGAVT,VGAHT,VGAVDE,VGAHDE;
+    unsigned short   VT,HT,VDE,HDE;
+    unsigned short   LCDHRS,LCDVRS,LCDHDES,LCDVDES;
+
+    unsigned short   ModeType;
+    unsigned short   IF_DEF_LVDS,IF_DEF_TRUMPION,IF_DEF_DSTN;/* ,IF_DEF_FSTN; add for dstn */
+    unsigned short   IF_DEF_CRT2Monitor,IF_DEF_VideoCapture;
+    unsigned short   IF_DEF_LCDA,IF_DEF_CH7017,IF_DEF_YPbPr,IF_DEF_ScaleLCD,IF_DEF_OEMUtil,IF_DEF_PWD;
+    unsigned short   IF_DEF_ExpLink;
+    unsigned short   IF_DEF_CH7005,IF_DEF_HiVision;
+    unsigned short   IF_DEF_CH7007; /* Billy 2007/05/03 */
+    unsigned short   LCDResInfo,LCDTypeInfo, VBType;/*301b*/
+    unsigned short   VBInfo,TVInfo,LCDInfo, Set_VGAType;
+    unsigned short   VBExtInfo;/*301lv*/
+    unsigned short   SetFlag;
+    unsigned short   NewFlickerMode;
+    unsigned short   SelectCRT2Rate;
+
+    unsigned char *ROMAddr;
+    unsigned char *FBAddr;
+    unsigned long BaseAddr;
+    unsigned long RelIO;
+
+	unsigned char (*CR6B)[4];
+	unsigned char (*CR6E)[4];
+	unsigned char (*CR6F)[32];
+	unsigned char (*CR89)[2];
+
+	unsigned char (*SR15)[8];
+	unsigned char (*CR40)[8];
+
+    unsigned char  *pSoftSetting;
+    unsigned char  *pOutputSelect;
+
+    unsigned short *pRGBSenseData;
+    unsigned short *pRGBSenseData2; /*301b*/
+    unsigned short *pVideoSenseData;
+    unsigned short *pVideoSenseData2;
+    unsigned short *pYCSenseData;
+    unsigned short *pYCSenseData2;
+
+    unsigned char  *pSR07;
+    unsigned char  *CR49;
+    unsigned char  *pSR1F;
+    unsigned char  *AGPReg;
+    unsigned char  *SR16;
+    unsigned char  *pSR21;
+    unsigned char  *pSR22;
+    unsigned char  *pSR23;
+    unsigned char  *pSR24;
+    unsigned char  *SR25;
+    unsigned char  *pSR31;
+    unsigned char  *pSR32;
+    unsigned char  *pSR33;
+    unsigned char  *pSR36;      /* alan 12/07/2006 */
+    unsigned char  *pCRCF;
+    unsigned char  *pCRD0;      /* alan 12/07/2006 */
+    unsigned char  *pCRDE;      /* alan 12/07/2006 */
+    unsigned char  *pCR8F;      /* alan 12/07/2006 */
+    unsigned char  *pSR40;      /* alan 12/07/2006 */
+    unsigned char  *pSR41;      /* alan 12/07/2006 */
+    unsigned char  *pDVOSetting;
+    unsigned char  *pCR2E;
+    unsigned char  *pCR2F;
+    unsigned char  *pCR46;
+    unsigned char  *pCR47;
+    unsigned char  *pCRT2Data_1_2;
+    unsigned char  *pCRT2Data_4_D;
+    unsigned char  *pCRT2Data_4_E;
+    unsigned char  *pCRT2Data_4_10;
+    struct XGI_MCLKDataStruct  *MCLKData;
+    struct XGI_ECLKDataStruct  *ECLKData;
+
+    unsigned char   *XGI_TVDelayList;
+    unsigned char   *XGI_TVDelayList2;
+    unsigned char   *CHTVVCLKUNTSC;
+    unsigned char   *CHTVVCLKONTSC;
+    unsigned char   *CHTVVCLKUPAL;
+    unsigned char   *CHTVVCLKOPAL;
+    unsigned char   *NTSCTiming;
+    unsigned char   *PALTiming;
+    unsigned char   *HiTVExtTiming;
+    unsigned char   *HiTVSt1Timing;
+    unsigned char   *HiTVSt2Timing;
+    unsigned char   *HiTVTextTiming;
+    unsigned char   *YPbPr750pTiming;
+    unsigned char   *YPbPr525pTiming;
+    unsigned char   *YPbPr525iTiming;
+    unsigned char   *HiTVGroup3Data;
+    unsigned char   *HiTVGroup3Simu;
+    unsigned char   *HiTVGroup3Text;
+    unsigned char   *Ren525pGroup3;
+    unsigned char   *Ren750pGroup3;
+    unsigned char   *ScreenOffset;
+    unsigned char   *pXGINew_DRAMTypeDefinition;
+    unsigned char   *pXGINew_I2CDefinition ;
+    unsigned char   *pXGINew_CR97 ;
+
+    struct XGI330_LCDCapStruct  *LCDCapList;
+    struct XGI21_LVDSCapStruct  *XG21_LVDSCapList;
+
+    struct XGI_TimingHStruct  *TimingH;
+    struct XGI_TimingVStruct  *TimingV;
+
+    struct XGI_StStruct          *SModeIDTable;
+    struct XGI_StandTableStruct  *StandTable;
+    struct XGI_ExtStruct         *EModeIDTable;
+    struct XGI_Ext2Struct        *RefIndex;
     /* XGINew_CRT1TableStruct *CRT1Table; */
-    XGI_CRT1TableStruct    *XGINEWUB_CRT1Table;
-    XGI_VCLKDataStruct    *VCLKData;
-    XGI_VBVCLKDataStruct  *VBVCLKData;
-    XGI_StResInfoStruct   *StResInfo;
-    XGI_ModeResInfoStruct *ModeResInfo;
-    XGI_XG21CRT1Struct	  *UpdateCRT1;
-};  /* _VB_DEVICE_INFO */
-
-
-typedef struct
-{
-    USHORT    Horizontal_ACTIVE;
-    USHORT    Horizontal_FP;
-    USHORT    Horizontal_SYNC;
-    USHORT    Horizontal_BP;
-    USHORT    Vertical_ACTIVE;
-    USHORT    Vertical_FP;
-    USHORT    Vertical_SYNC;
-    USHORT    Vertical_BP;
+    struct XGI_CRT1TableStruct    *XGINEWUB_CRT1Table;
+    struct XGI_VCLKDataStruct    *VCLKData;
+    struct XGI_VBVCLKDataStruct  *VBVCLKData;
+    struct XGI_StResInfoStruct   *StResInfo;
+    struct XGI_ModeResInfoStruct *ModeResInfo;
+    struct XGI_XG21CRT1Struct	  *UpdateCRT1;
+};  /* _struct vb_device_info */
+
+
+struct TimingInfo
+{
+    unsigned short    Horizontal_ACTIVE;
+    unsigned short    Horizontal_FP;
+    unsigned short    Horizontal_SYNC;
+    unsigned short    Horizontal_BP;
+    unsigned short    Vertical_ACTIVE;
+    unsigned short    Vertical_FP;
+    unsigned short    Vertical_SYNC;
+    unsigned short    Vertical_BP;
     double    DCLK;
-    UCHAR     FrameRate;
-    UCHAR     Interlace;
-    USHORT    Margin;
-} TimingInfo;
+    unsigned char     FrameRate;
+    unsigned char     Interlace;
+    unsigned short    Margin;
+};
 
 #define _VB_STRUCT_
 #endif /* _VB_STRUCT_ */
diff --git a/drivers/staging/xgifb/vb_table.h b/drivers/staging/xgifb/vb_table.h
index 781caefc56b..510ef767868 100644
--- a/drivers/staging/xgifb/vb_table.h
+++ b/drivers/staging/xgifb/vb_table.h
@@ -1,7 +1,7 @@
 #define  Tap4
 
 
-XGI_MCLKDataStruct XGI330New_MCLKData[]=
+struct XGI_MCLKDataStruct XGI330New_MCLKData[] =
 {
  { 0x5c,0x23,0x01,166},
  { 0x5c,0x23,0x01,166},
@@ -13,7 +13,7 @@ XGI_MCLKDataStruct XGI330New_MCLKData[]=
  { 0x29,0x01,0x81,300}
 };
 //yilin modify for xgi20
-XGI_MCLKDataStruct XGI340New_MCLKData[]=
+struct XGI_MCLKDataStruct XGI340New_MCLKData[] =
 {
  { 0x16,0x01,0x01,166},
  { 0x19,0x02,0x01,124},
@@ -25,7 +25,7 @@ XGI_MCLKDataStruct XGI340New_MCLKData[]=
  { 0x5c,0x23,0x01,166}
 };
 
-XGI_MCLKDataStruct XGI27New_MCLKData[]=
+struct XGI_MCLKDataStruct XGI27New_MCLKData[] =
 {
  { 0x5c,0x23,0x01,166},
  { 0x19,0x02,0x01,124},
@@ -37,7 +37,7 @@ XGI_MCLKDataStruct XGI27New_MCLKData[]=
  { 0x5c,0x23,0x01,166}
 };
 
-XGI_ECLKDataStruct XGI330_ECLKData[]=
+struct XGI_ECLKDataStruct XGI330_ECLKData[] =
 {
  { 0x7c,0x08,0x01,200},
  { 0x7c,0x08,0x01,200},
@@ -49,7 +49,7 @@ XGI_ECLKDataStruct XGI330_ECLKData[]=
  { 0x29,0x01,0x81,300}
 };
 //yilin modify for xgi20
-XGI_ECLKDataStruct XGI340_ECLKData[]=
+struct XGI_ECLKDataStruct XGI340_ECLKData[] =
 {
  { 0x5c,0x23,0x01,166},
  { 0x55,0x84,0x01,123},
@@ -63,14 +63,14 @@ XGI_ECLKDataStruct XGI340_ECLKData[]=
 
 
 
-UCHAR XGI340_SR13[4][8]={
+unsigned char XGI340_SR13[4][8] = {
 {0x35,0x45,0xb1,0x00,0x00,0x00,0x00,0x00},/* SR13 */
 {0x41,0x51,0x5c,0x00,0x00,0x00,0x00,0x00},/* SR14 */
 {0x31,0x42,0x42,0x00,0x00,0x00,0x00,0x00},/* SR18 */
 {0x03,0x03,0x03,0x00,0x00,0x00,0x00,0x00}/* SR1B */
 };
 
-UCHAR XGI340_cr41[24][8]=
+unsigned char XGI340_cr41[24][8] =
 {{0x20,0x50,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
 {0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
 {0xc4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
@@ -98,7 +98,7 @@ UCHAR XGI340_cr41[24][8]=
 };
 
 
-UCHAR XGI27_cr41[24][8]=
+unsigned char XGI27_cr41[24][8] =
 {
 {0x20,0x40,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
 {0xC4,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
@@ -126,37 +126,7 @@ UCHAR XGI27_cr41[24][8]=
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
 };
 
-
-#if 0
-UCHAR XGI27_cr41[24][8]=
-{
-{0x20,0x60,0x60,0x00,0x00,0x00,0x00,0x00},/* 0 CR41 */
-{0x04,0x44,0x84,0x00,0x00,0x00,0x00,0x00},/* 1 CR8A */
-{0x04,0x40,0x84,0x00,0x00,0x00,0x00,0x00},/* 2 CR8B */
-{0xb5,0x03,0xa4,0x00,0x00,0x00,0x00,0x00},/* 3 CR40[7],CR99[2:0],CR45[3:0]*/
-{0xf0,0xf5,0xf0,0x00,0x00,0x00,0x00,0x00},/* 4 CR59 */
-{0xa4,0x1C,0x24,0x00,0x00,0x00,0x00,0x00},/* 5 CR68 */
-{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 6 CR69 */
-{0x77,0x77,0x44,0x00,0x00,0x00,0x00,0x00},/* 7 CR6A */
-{0xff,0xff,0xff,0x00,0x00,0x00,0x00,0x00},/* 8 CR6D */
-{0x55,0x55,0x55,0x00,0x00,0x00,0x00,0x00},/* 9 CR80 */
-{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/* 10 CR81 */
-{0x48,0xa8,0x48,0x00,0x00,0x00,0x00,0x00},/* 11 CR82 */
-{0x77,0x88,0x77,0x00,0x00,0x00,0x00,0x00},/* 12 CR85 */
-{0x88,0x88,0x88,0x00,0x00,0x00,0x00,0x00},/* 13 CR86 */
-{0x44,0x32,0x44,0x00,0x00,0x00,0x00,0x00},/* 14 CR90 */
-{0x44,0x33,0x44,0x00,0x00,0x00,0x00,0x00},/* 15 CR91 */
-{0x07,0x07,0x07,0x00,0x00,0x00,0x00,0x00},/* 16 CR92 */
-{0x44,0x63,0x44,0x00,0x00,0x00,0x00,0x00},/* 17 CR93 */
-{0x0A,0x14,0x0A,0x00,0x00,0x00,0x00,0x00},/* 18 CR94 */
-{0x0C,0x0B,0x0C,0x00,0x00,0x00,0x00,0x00},/* 19 CR95 */
-{0x05,0x22,0x05,0x00,0x00,0x00,0x00,0x00},/* 20 CR96 */
-{0xf0,0xf0,0xf0,0x00,0x00,0x00,0x00,0x00},/* 21 CRC3 */
-{0x03,0x00,0x02,0x00,0x00,0x00,0x00,0x00},/* 22 CRC4 */
-{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}/* 23 CRC5 */
-};
-#endif
-UCHAR XGI340_CR6B[8][4]={
+unsigned char XGI340_CR6B[8][4] = {
 {0xaa,0xaa,0xaa,0xaa},
 {0xaa,0xaa,0xaa,0xaa},
 {0xaa,0xaa,0xaa,0xaa},
@@ -167,7 +137,7 @@ UCHAR XGI340_CR6B[8][4]={
 {0x00,0x00,0x00,0x00}
 };
 
-UCHAR XGI340_CR6E[8][4]={
+unsigned char XGI340_CR6E[8][4] = {
 {0x00,0x00,0x00,0x00},
 {0x00,0x00,0x00,0x00},
 {0x00,0x00,0x00,0x00},
@@ -178,7 +148,7 @@ UCHAR XGI340_CR6E[8][4]={
 {0x00,0x00,0x00,0x00}
 };
 
-UCHAR XGI340_CR6F[8][32]={
+unsigned char XGI340_CR6F[8][32] = {
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
@@ -189,7 +159,7 @@ UCHAR XGI340_CR6F[8][32]={
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}
 };
 
-UCHAR XGI340_CR89[8][2]={
+unsigned char XGI340_CR89[8][2] = {
 {0x00,0x00},
 {0x00,0x00},
 {0x00,0x00},
@@ -200,11 +170,12 @@ UCHAR XGI340_CR89[8][2]={
 {0x00,0x00}
 };
 			 /* CR47,CR48,CR49,CR4A,CR4B,CR4C,CR70,CR71,CR74,CR75,CR76,CR77 */
-UCHAR XGI340_AGPReg[12]={0x28,0x23,0x00,0x20,0x00,0x20,0x00,0x05,0xd0,0x10,0x10,0x00};
+unsigned char XGI340_AGPReg[12] = {0x28, 0x23, 0x00, 0x20, 0x00, 0x20, 0x00,
+				   0x05, 0xd0, 0x10, 0x10, 0x00};
 
-UCHAR XGI340_SR16[4]={0x03,0x83,0x03,0x83};
+unsigned char XGI340_SR16[4] = {0x03, 0x83, 0x03, 0x83};
 
-UCHAR XGI330_SR15_1[8][8]={
+unsigned char XGI330_SR15_1[8][8] = {
 {0x0,0x0,0x00,0x00,0x20,0x20,0x00,0x00},
 {0x5,0x15,0x15,0x15,0x15,0x15,0x00,0x00},
 {0xba,0xba,0xba,0xba,0xBA,0xBA,0x00,0x00},
@@ -215,7 +186,7 @@ UCHAR XGI330_SR15_1[8][8]={
 {0x0,0xa5,0xfb,0xf6,0xF6,0xF6,0x00,0x00}
 };
 
-UCHAR XGI330_cr40_1[15][8]={
+unsigned char XGI330_cr40_1[15][8] = {
 {0x66,0x40,0x40,0x28,0x24,0x24,0x00,0x00},
 {0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
 {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
@@ -233,14 +204,14 @@ UCHAR XGI330_cr40_1[15][8]={
 {0x00,0xA2,0x00,0x00,0xA2,0xA2,0x00,0x00},
 };
 
-UCHAR XGI330_sr25[]={0x00,0x0};
-UCHAR XGI330_sr31=0xc0;
-UCHAR XGI330_sr32=0x11;
-UCHAR XGI330_SR33=0x00;
-UCHAR XG40_CRCF=0x13;
-UCHAR XG40_DRAMTypeDefinition=0xFF ;
+unsigned char XGI330_sr25[] = {0x00, 0x0};
+unsigned char XGI330_sr31 = 0xc0;
+unsigned char XGI330_sr32 = 0x11;
+unsigned char XGI330_SR33 = 0x00;
+unsigned char XG40_CRCF = 0x13;
+unsigned char XG40_DRAMTypeDefinition = 0xFF ;
 
-XGI_StStruct XGI330_SModeIDTable[]=
+struct XGI_StStruct XGI330_SModeIDTable[] =
 {
  {0x01,0x9208,0x01,0x00,0x10,0x00,0x00,0x01,0x00},
  {0x01,0x1210,0x14,0x01,0x00,0x01,0x00,0x01,0x00},
@@ -265,7 +236,7 @@ XGI_StStruct XGI330_SModeIDTable[]=
 };
 
 
-XGI_ExtStruct  XGI330_EModeIDTable[]=
+struct XGI_ExtStruct  XGI330_EModeIDTable[] =
 {
  {0x6a,0x2212,0x0407,0x3a81,0x0102,0x08,0x07,0x00,0x00,0x07,0x0e},
  {0x2e,0x0a1b,0x0306,0x3a57,0x0101,0x08,0x06,0x00,0x00,0x05,0x06},
@@ -337,7 +308,7 @@ XGI_ExtStruct  XGI330_EModeIDTable[]=
  {0xff,0x0000,0x0000,0x0000,0x0000,0x00,0x00,0x00,0x00,0x00,0x00}
 };
 
-XGI_StandTableStruct XGI330_StandTable[]=
+struct XGI_StandTableStruct XGI330_StandTable[] =
 {
 /* MD_0_200 */
  {
@@ -775,13 +746,13 @@ XGI_StandTableStruct XGI330_StandTable[]=
  }
 };
 
-XGI_TimingHStruct XGI_TimingH[]=
+struct XGI_TimingHStruct XGI_TimingH[] =
 {{{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
 
-XGI_TimingVStruct XGI_TimingV[]=
+struct XGI_TimingVStruct XGI_TimingV[] =
 {{{0x00,0x00,0x00,0x00,0x00,0x00,0x00}}};
 
-XGI_XG21CRT1Struct XGI_UpdateCRT1Table[]=
+struct XGI_XG21CRT1Struct XGI_UpdateCRT1Table[] =
 {
  {0x01,0x27,0x91,0x8f,0xc0},	/* 00 */
  {0x03,0x4f,0x83,0x8f,0xc0},	/* 01 */
@@ -802,7 +773,7 @@ XGI_XG21CRT1Struct XGI_UpdateCRT1Table[]=
  {0x59,0x27,0x91,0x8f,0xc0}	/* 16 */
 };
 
-XGI_CRT1TableStruct XGI_CRT1Table[]=
+struct XGI_CRT1TableStruct XGI_CRT1Table[] =
 {
  {{0x2d,0x28,0x90,0x2c,0x90,0x00,0x04,0x00,
     0xbf,0x1f,0x9c,0x8e,0x96,0xb9,0x30}}, /* 0x0 */
@@ -950,7 +921,7 @@ XGI_CRT1TableStruct XGI_CRT1Table[]=
     0x03,0xDE,0xC0,0x84,0xBF,0x04,0x90}}  /* 0x47 */
 };
 
-XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
+struct XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
                 /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
                 {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
                 {{      0x4A,0x77,0xBB,0x94,0x84,0x48,0xFE,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
@@ -961,7 +932,7 @@ XGI330_CHTVRegDataStruct XGI_CHTVRegUNTSC[] = {
                 {{      0xEE,0x77,0xBB,0x66,0x87,0x32,0x01,0x5A,0x04,0x00,0x80,0x1B,0xD4,0x2F,0x6F,0x00  }}/* 06 (1024x768) ;;5/6/02 */
           };
 
-XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[]= {
+struct XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[] = {
                 /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
                 {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 00 (640x200,640x400) */
                 {{      0x49,0x77,0xBB,0x7B,0x84,0x34,0x00,0x50,0x04,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* 01 (640x350) */
@@ -972,7 +943,7 @@ XGI330_CHTVRegDataStruct XGI_CHTVRegONTSC[]= {
                 {{      0xED,0x77,0xBB,0x66,0x8C,0x21,0x02,0x5A,0x04,0x00,0x80,0x1F,0xA0,0x7E,0x73,0x00  }}/* 06 (1024x768) ;;5/6/02 */
           };
 
-XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[]=  {
+struct XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[] = {
                 /* Index:000h,001h,002h,004h,003h,005h,006h,007h,008h,015h,01Fh,00Ch,00Dh,00Eh,00Fh,010h */
                 {{      0x41,0x7F,0xB7,0x34,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 00 (640x200,640x400) */
                 {{      0x41,0x7F,0xB7,0x80,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01  }},/* ; 01 (640x350) */
@@ -983,7 +954,7 @@ XGI330_CHTVRegDataStruct XGI_CHTVRegUPAL[]=  {
                 {{      0xE5,0x7F,0xB7,0x1D,0xA7,0x3E,0x04,0x5A,0x05,0x00,0x80,0x20,0x3E,0xE4,0x22,0x00  }}/* ; 06 (1024x768) ;;1/12/02 */
 	  };
 
-XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[]={
+struct XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[] = {
                 /* Index:000,0x01,0x02,0x04,0x03,0x05,0x06,0x07,0x08,0x15,0x1F,0x0C,0x0D,0x0E,0x0F,0x10h */
                 {{      0x41,0x7F,0xB7,0x36,0xAD,0x50,0x34,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 00 (640x200,640x400) */
                 {{      0x41,0x7F,0xB7,0x86,0x85,0x50,0x00,0x83,0x05,0x00,0x80,0x00,0x00,0x00,0x00,0x01 }},/* 01 (640x350) */
@@ -994,14 +965,14 @@ XGI330_CHTVRegDataStruct XGI_CHTVRegOPAL[]={
                 {{      0xE4,0x7F,0xB7,0x1E,0xAF,0x29,0x37,0x5A,0x05,0x00,0x80,0x25,0x8C,0xB2,0x2A,0x00 }}/* 06 (1024x768) ;;1/12/02 */
 	     };
 
-UCHAR XGI_CH7017LV1024x768[]={0x60,0x02,0x00,0x07,0x40,0xED,0xA3,
-                   			0xC8,0xC7,0xAC,0xE0,0x02};
-UCHAR XGI_CH7017LV1400x1050[]={0x60,0x03,0x11,0x00,0x40,0xE3,0xAD,
-                   			0xDB,0xF6,0xAC,0xE0,0x02};
+unsigned char XGI_CH7017LV1024x768[] = {0x60, 0x02, 0x00, 0x07, 0x40, 0xED, 0xA3,
+					0xC8, 0xC7, 0xAC, 0xE0, 0x02};
+unsigned char XGI_CH7017LV1400x1050[] = {0x60, 0x03, 0x11, 0x00, 0x40, 0xE3, 0xAD,
+					 0xDB, 0xF6, 0xAC, 0xE0, 0x02};
 
 
 /*add for new UNIVGABIOS*/
-XGI330_LCDDataStruct  XGI_StLCD1024x768Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1024x768Data[] =
 {
  {   62,  25, 800, 546,1344, 806},
  {   32,  15, 930, 546,1344, 806},
@@ -1012,7 +983,7 @@ XGI330_LCDDataStruct  XGI_StLCD1024x768Data[]=
  {    1,   1,1344, 806,1344, 806}
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[] =
 {
  {   42,  25,1536, 419,1344, 806}, /* { 12, 5, 896, 512,1344, 806}, // alan 09/12/2003 */
  {   48,  25,1536, 369,1344, 806}, /* { 12, 5, 896, 510,1344, 806}, // alan 09/12/2003 */
@@ -1029,7 +1000,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[]=
  {    1,   1,1344, 806,1344, 806}
 };
 
-/*XGI330_LCDDataStruct  XGI_St2LCD1024x768Data[]=
+/*struct XGI330_LCDDataStruct  XGI_St2LCD1024x768Data[] =
 {
  {   62,  25, 800, 546,1344, 806},
  {   32,  15, 930, 546,1344, 806},
@@ -1040,7 +1011,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1024x768Data[]=
  {    1,   1,1344, 806,1344, 806}
 };*/
 
-XGI330_LCDDataStruct  XGI_CetLCD1024x768Data[]=
+struct XGI330_LCDDataStruct  XGI_CetLCD1024x768Data[] =
 {
 	{         1,1,1344,806,1344,806           }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {         1,1,1344,806,1344,806           }, /* 01 (320x350,640x350) */
@@ -1051,7 +1022,7 @@ XGI330_LCDDataStruct  XGI_CetLCD1024x768Data[]=
         {         1,1,1344,806,1344,806           }  /* 06 (1024x768x60Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_StLCD1280x1024Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1280x1024Data[] =
 {
  {   22,   5, 800, 510,1650,1088},
  {   22,   5, 800, 510,1650,1088},
@@ -1063,7 +1034,7 @@ XGI330_LCDDataStruct  XGI_StLCD1280x1024Data[]=
  {    1,   1,1688,1066,1688,1066}
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1280x1024Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1280x1024Data[] =
 {
  {  211,  60,1024, 501,1688,1066},
  {  211,  60,1024, 508,1688,1066},
@@ -1075,7 +1046,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1280x1024Data[]=
  {    1,   1,1688,1066,1688,1066}
 };
 
-XGI330_LCDDataStruct  XGI_St2LCD1280x1024Data[]=
+struct XGI330_LCDDataStruct  XGI_St2LCD1280x1024Data[] =
 {
  {   22,   5, 800, 510,1650,1088},
  {   22,   5, 800, 510,1650,1088},
@@ -1087,7 +1058,7 @@ XGI330_LCDDataStruct  XGI_St2LCD1280x1024Data[]=
  {    1,   1,1688,1066,1688,1066}
 };
 
-XGI330_LCDDataStruct  XGI_CetLCD1280x1024Data[]=
+struct XGI330_LCDDataStruct  XGI_CetLCD1280x1024Data[] =
 {
 	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
         {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
@@ -1100,7 +1071,7 @@ XGI330_LCDDataStruct  XGI_CetLCD1280x1024Data[]=
         {         1,1,1688,1066,1688,1066         } /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_StLCD1400x1050Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1400x1050Data[] =
 {
 	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
         {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
@@ -1113,7 +1084,7 @@ XGI330_LCDDataStruct  XGI_StLCD1400x1050Data[]=
         {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1400x1050Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1400x1050Data[] =
 {
 	{         211,100,2100,408,1688,1066      }, /* 00 (320x200,320x400,640x200,640x400) */
         {         211,64,1536,358,1688,1066       }, /* 01 (320x350,640x350) */
@@ -1126,7 +1097,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1400x1050Data[]=
         {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1600x1200Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1600x1200Data[] =
 {
         {         4,1,1620,420,2160,1250          }, /* { 3,1,2160,425,2160,1250 }, // 00 (320x200,320x400,640x200,640x400) // alan 10/14/2003 */
         {         27,7,1920,375,2160,1250         }, /* 01 (320x350,640x350) */
@@ -1140,7 +1111,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1600x1200Data[]=
         {         1,1,2160,1250,2160,1250         }  /* 09 (1600x1200x60Hz) ;302lv */
 };
 
-XGI330_LCDDataStruct  XGI_StLCD1600x1200Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1600x1200Data[] =
 {
         {         27,4,800,500,2160,1250          },/* 00 (320x200,320x400,640x200,640x400) */
         {         27,4,800,500,2160,1250          },/* 01 (320x350,640x350) */
@@ -1154,7 +1125,7 @@ XGI330_LCDDataStruct  XGI_StLCD1600x1200Data[]=
         {         1,1,2160,1250,2160,1250         } /* 09 (1600x1200) */
 };
 
-XGI330_LCDDataStruct  XGI_CetLCD1400x1050Data[]=
+struct XGI330_LCDDataStruct  XGI_CetLCD1400x1050Data[] =
 {
 	{         1,1,1688,1066,1688,1066         }, /* 00 (320x200,320x400,640x200,640x400) */
         {         1,1,1688,1066,1688,1066         }, /* 01 (320x350,640x350) */
@@ -1167,7 +1138,7 @@ XGI330_LCDDataStruct  XGI_CetLCD1400x1050Data[]=
         {         1,1,1688,1066,1688,1066         }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_NoScalingData[]=
+struct XGI330_LCDDataStruct  XGI_NoScalingData[] =
 {
  {    1,   1, 800, 449, 800, 449},
  {    1,   1, 800, 449, 800, 449},
@@ -1179,7 +1150,7 @@ XGI330_LCDDataStruct  XGI_NoScalingData[]=
  {    1,   1,1688,1066,1688,1066}
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1024x768x75Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1024x768x75Data[] =
 {
         {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
@@ -1190,7 +1161,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1024x768x75Data[]=
         {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_StLCD1024x768x75Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1024x768x75Data[] =
 {
         {42,25,1536,419,1344,806 }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {48,25,1536,369,1344,806 }, /* ; 01 (320x350,640x350) */
@@ -1201,7 +1172,7 @@ XGI330_LCDDataStruct  XGI_StLCD1024x768x75Data[]=
         {1,1,1312,800,1312,800   }  /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_CetLCD1024x768x75Data[]=
+struct XGI330_LCDDataStruct  XGI_CetLCD1024x768x75Data[] =
 {
         {1,1,1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1,1,1312,800,1312,800}, /* ; 01 (320x350,640x350) */
@@ -1212,7 +1183,7 @@ XGI330_LCDDataStruct  XGI_CetLCD1024x768x75Data[]=
         {1,1,1312,800,1312,800} /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_ExtLCD1280x1024x75Data[]=
+struct XGI330_LCDDataStruct  XGI_ExtLCD1280x1024x75Data[] =
 {
         {211,60,1024,501,1688,1066   }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {211,60,1024,508,1688,1066   }, /* ; 01 (320x350,640x350) */
@@ -1224,7 +1195,7 @@ XGI330_LCDDataStruct  XGI_ExtLCD1280x1024x75Data[]=
         {1,1,1688,1066,1688,1066     }  /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_StLCD1280x1024x75Data[]=
+struct XGI330_LCDDataStruct  XGI_StLCD1280x1024x75Data[] =
 {
         {211,60,1024,501,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {211,60,1024,508,1688,1066 }, /* ; 01 (320x350,640x350) */
@@ -1236,7 +1207,7 @@ XGI330_LCDDataStruct  XGI_StLCD1280x1024x75Data[]=
         {1,1,1688,1066,1688,1066   }  /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_CetLCD1280x1024x75Data[]=
+struct XGI330_LCDDataStruct  XGI_CetLCD1280x1024x75Data[] =
 {
         {1,1,1688,1066,1688,1066}, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1,1,1688,1066,1688,1066}, /* ; 01 (320x350,640x350) */
@@ -1248,7 +1219,7 @@ XGI330_LCDDataStruct  XGI_CetLCD1280x1024x75Data[]=
         {1,1,1688,1066,1688,1066}  /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataStruct  XGI_NoScalingDatax75[]=
+struct XGI330_LCDDataStruct  XGI_NoScalingDatax75[] =
 {
         {1,1,800,449,800,449    }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1,1,800,449,800,449    }, /* ; 01 (320x350,640x350) */
@@ -1263,7 +1234,7 @@ XGI330_LCDDataStruct  XGI_NoScalingDatax75[]=
         {1,1,1688,806,1688,806  }  /* ; 0A (1280x768x75Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[] =
 {
    {  9,1057,0, 771  }, /* ; 00 (320x200,320x400,640x200,640x400) */
    {  9,1057,0, 771  }, /* ; 01 (320x350,640x350) */
@@ -1274,7 +1245,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768Data[]=
    {  9,1057,805, 770  }  /* ; 06 (1024x768x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[] =
 {
         { 9,1057,737,703   }, /* ; 00 (320x200,320x400,640x200,640x400) */
         { 9,1057,686,651   }, /* ; 01 (320x350,640x350) */
@@ -1285,7 +1256,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768Data[]=
         { 9,1057,805,770   }  /* ; 06 (1024x768x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[]=
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[] =
 {
        	{      1152,856,622,587   }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {      1152,856,597,562   }, /* ; 01 (320x350,640x350) */
@@ -1296,7 +1267,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768Data[]=
         {      0,1048,805,770   }  /* ; 06 (1024x768x60Hz) */
 };
 
-XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[] =
 {
         {      18,1346,981,940     },/* 00 (320x200,320x400,640x200,640x400) */
         {      18,1346,926,865     },/* 01 (320x350,640x350) */
@@ -1308,7 +1279,7 @@ XGI330_LCDDataDesStruct XGI_ExtLCDDLDes1280x1024Data[]=
         {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[] =
 {
         {      18,1346,970,907     },/* 00 (320x200,320x400,640x200,640x400) */
         {      18,1346,917,854     },/* 01 (320x350,640x350) */
@@ -1320,7 +1291,7 @@ XGI330_LCDDataDesStruct XGI_StLCDDLDes1280x1024Data[]=
         {      18,1346,1065,1024     }/* 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[] =
 {
         {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
@@ -1332,7 +1303,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024Data[]=
         {      18,1346,1065,1024    }  /* 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[] =
 {
         {      9,1337,981,940    }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {      9,1337,926,884    }, /* ; 01 (320x350,640x350) alan, 2003/09/30 */
@@ -1344,7 +1315,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024Data[]=
         {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[] =
 {
         {      9,1337,970,907    }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {      9,1337,917,854    }, /* ; 01 (320x350,640x350) */
@@ -1356,7 +1327,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024Data[]=
         {      9,1337,1065,1024    }  /* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[]=
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[] =
 {
         {      1368,1008,752,711    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1368,1008,729,688    }, /* 01 (320x350,640x350) */
@@ -1368,7 +1339,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024Data[]=
         {      9,1337,1065,1024    }  /* 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDLDes1400x1050Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1400x1050Data[] =
 {
         {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
@@ -1381,7 +1352,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDLDes1400x1050Data[]=
         {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1400x1050Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1400x1050Data[] =
 {
         {      18,1464,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      18,1464,0,1051    }, /* 01 (320x350,640x350) */
@@ -1394,7 +1365,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1400x1050Data[]=
         {      18,1464,0,1051    }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1400x1050Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1400x1050Data[] =
 {
         {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
         {      9,1455,0,1051     },/* 01 (320x350,640x350) */
@@ -1407,7 +1378,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1400x1050Data[]=
         {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1400x1050Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1400x1050Data[] =
 {
         {      9,1455,0,1051     },/* 00 (320x200,320x400,640x200,640x400) */
         {      9,1455,0,1051     },/* 01 (320x350,640x350) */
@@ -1420,7 +1391,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1400x1050Data[]=
         {      9,1455,0,1051     } /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[]=
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[] =
 {
         {      1308,1068,781,766    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1308,1068,781,766    }, /* 01 (320x350,640x350) */
@@ -1433,7 +1404,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data[]=
         {      18,1464,0,1051    } /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[]=
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[] =
 {
         {      0,1448,0,1051    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      0,1448,0,1051    }, /* 01 (320x350,640x350) */
@@ -1444,7 +1415,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1400x1050Data2[]=
 
 
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[] =
 {
 	{      18,1682,0,1201    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      18,1682,0,1201    }, /* 01 (320x350,640x350) */
@@ -1458,7 +1429,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1600x1200Data[]=
         {      18,1682,0,1201    }  /* 09 (1600x1200x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[] =
 {
         {      18,1682,1150,1101    }, /* 00 (320x200,320x400,640x200,640x400) */
         {      18,1682,1083,1034    }, /* 01 (320x350,640x350) */
@@ -1472,7 +1443,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDLDes1600x1200Data[]=
         {      18,1682,0,1201    } /* 09 (1600x1200x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[]=
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[] =
 {
         {      9,1673,0,1201     },/* 00 (320x200,320x400,640x200,640x400) */
         {      9,1673,0,1201     },/* 01 (320x350,640x350) */
@@ -1486,7 +1457,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1600x1200Data[]=
         {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[] =
 {
 	{      9,1673,1150,1101     },/* 00 (320x200,320x400,640x200,640x400) */
         {      9,1673,1083,1034     },/* 01 (320x350,640x350) */
@@ -1500,7 +1471,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1600x1200Data[]=
         {      9,1673,0,1201     } /* 09 (1600x1200x60Hz) */
 };
 
-XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[]=
+struct XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[] =
 {
         {     9,657,448,405,96,2  }, /* 00 (320x200,320x400,640x200,640x400) */
         {     9,657,448,355,96,2  }, /* 01 (320x350,640x350) */
@@ -1515,7 +1486,7 @@ XGI330_LCDDataDesStruct2  XGI_NoScalingDesData[]=
         {     9,1337,0,771,112,6  }  /* 0A (1280x768x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768x75Data[]=		/* ;;1024x768x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768x75Data[] =		/* ;;1024x768x75Hz */
 {
         {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
         {9,1049,0,769},    /* ; 01 (320x350,640x350) */
@@ -1526,7 +1497,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1024x768x75Data[]=		/* ;;1024x768x75Hz */
         {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768x75Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768x75Data[] =
 {
         {9,1049,0,769},    /* ; 00 (320x200,320x400,640x200,640x400) */
         {9,1049,0,769},    /* ; 01 (320x350,640x350) */
@@ -1537,7 +1508,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1024x768x75Data[]=
         {9,1049,0,769}     /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[]=	/* ;;1024x768x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[] =	/* ;;1024x768x75Hz */
 {
         {1152,856,622,587},     /* ; 00 (320x200,320x400,640x200,640x400) */
         {1152,856,597,562},     /* ; 01 (320x350,640x350) */
@@ -1548,7 +1519,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1024x768x75Data[]=	/* ;;1024x768x75Hz */
         {9,1049,0,769} 	   	/* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1280x1024x75Data[] =         /* ;;1280x1024x75Hz */
 {
         {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
         {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
@@ -1560,7 +1531,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDLDes1280x1024x75Data[]=         /* ;;1280x10
         {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDLDes1280x1024x75Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDLDes1280x1024x75Data[] =
 {
         {18,1314,0,1025     },/* ; 00 (320x200,320x400,640x200,640x400) */
         {18,1314,0,1025     },/* ; 01 (320x350,640x350) */
@@ -1572,7 +1543,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDLDes1280x1024x75Data[]=
         {18,1314,0,1025     }/* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[] =	/* 1280x1024x75Hz */
 {
         {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
         {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
@@ -1584,7 +1555,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDLDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
         {18,1314,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024x75Data[]=         /* ;;1280x1024x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024x75Data[] =         /* ;;1280x1024x75Hz */
 {
 	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
         {9,1305,0,1025},/* ; 01 (320x350,640x350) */
@@ -1596,7 +1567,7 @@ XGI330_LCDDataDesStruct  XGI_ExtLCDDes1280x1024x75Data[]=         /* ;;1280x1024
         {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024x75Data[]=
+struct XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024x75Data[] =
 {
 	{9,1305,0,1025},/* ; 00 (320x200,320x400,640x200,640x400) */
         {9,1305,0,1025},/* ; 01 (320x350,640x350) */
@@ -1608,7 +1579,7 @@ XGI330_LCDDataDesStruct  XGI_StLCDDes1280x1024x75Data[]=
         {9,1305,0,1025} /* ; 07 (1280x1024x60Hz) */
 };
 
-XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
+struct XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[] =	/* 1280x1024x75Hz */
 {
         {1368,1008,752,711},    /* ; 00 (320x200,320x400,640x200,640x400) */
         {1368,1008,729,688},    /* ; 01 (320x350,640x350) */
@@ -1620,7 +1591,7 @@ XGI330_LCDDataDesStruct  XGI_CetLCDDes1280x1024x75Data[]=	/* 1280x1024x75Hz */
         {9,1305,0,1025}     	  /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[]= /* Scaling LCD 75Hz */
+struct XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[] = /* Scaling LCD 75Hz */
 {
 	{9,657,448,405,96,2},   /* ; 00 (320x200,320x400,640x200,640x400) */
         {9,657,448,355,96,2},   /* ; 01 (320x350,640x350) */
@@ -1635,7 +1606,7 @@ XGI330_LCDDataDesStruct2 XGI_NoScalingDesDatax75[]= /* Scaling LCD 75Hz */
         {9,1337,0,771,112,6}    /* ; 0A (1280x768x60Hz) */
 };
 
-XGI330_TVDataStruct  XGI_StPALData[]=
+struct XGI330_TVDataStruct  XGI_StPALData[] =
 {
  {    1,   1, 864, 525,1270, 400, 100,   0, 760},
  {    1,   1, 864, 525,1270, 350, 100,   0, 760},
@@ -1645,7 +1616,7 @@ XGI330_TVDataStruct  XGI_StPALData[]=
  {    1,   1, 864, 525,1270, 600,  50,   0,   0}
 };
 
-XGI330_TVDataStruct  XGI_ExtPALData[]=
+struct XGI330_TVDataStruct  XGI_ExtPALData[] =
 {
  {    2,   1,1080, 463,1270, 500,  50,   0,  50},
  {   15,   7,1152, 413,1270, 500,  50,   0,  50},
@@ -1657,7 +1628,7 @@ XGI330_TVDataStruct  XGI_ExtPALData[]=
  {    3,   2,1080, 619,1270, 540, 438,   0, 438}
 };
 
-XGI330_TVDataStruct  XGI_StNTSCData[]=
+struct XGI330_TVDataStruct  XGI_StNTSCData[] =
 {
  {    1,   1, 858, 525,1270, 400,  50,   0, 760},
  {    1,   1, 858, 525,1270, 350,  50,   0, 640},
@@ -1666,7 +1637,7 @@ XGI330_TVDataStruct  XGI_StNTSCData[]=
  {    1,   1, 858, 525,1270, 480,   0,   0, 760}
 };
 
-XGI330_TVDataStruct  XGI_ExtNTSCData[]=
+struct XGI330_TVDataStruct  XGI_ExtNTSCData[] =
 {
  {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
  {   12,  5,  858, 403,1270, 420, 171,   0, 171},
@@ -1679,7 +1650,7 @@ XGI330_TVDataStruct  XGI_ExtNTSCData[]=
  {    3,   2,1001, 533,1270, 420,   0,   0,   0}
 };
 
-XGI330_TVDataStruct  XGI_St1HiTVData[]=
+struct XGI330_TVDataStruct  XGI_St1HiTVData[] =
 {
     	{        1,1,892,563,690,800,0,0,0               }, /* 00 (320x200,320x400,640x200,640x400) */
         {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
@@ -1689,7 +1660,7 @@ XGI330_TVDataStruct  XGI_St1HiTVData[]=
         {        8,5,1050,683,1648,960,0x150,1,0         }  /* 05 (400x300,800x600) */
 };
 
-XGI330_TVDataStruct  XGI_St2HiTVData[]=
+struct XGI330_TVDataStruct  XGI_St2HiTVData[] =
 {
         {        3,1,840,483,1648,960,0x032,0,0          }, /* 00 (320x200,320x400,640x200,640x400) */
         {        1,1,892,563,690,700,0,0,0               }, /* 01 (320x350,640x350) */
@@ -1700,7 +1671,7 @@ XGI330_TVDataStruct  XGI_St2HiTVData[]=
 
 };
 
-XGI330_TVDataStruct  XGI_ExtHiTVData[]=
+struct XGI330_TVDataStruct  XGI_ExtHiTVData[] =
 {
         {        6,1,840,563,1632,960,0,0,0              }, /* 00 (320x200,320x400,640x200,640x400) */
         {        3,1,960,563,1632,960,0,0,0              }, /* 01 (320x350,640x350) */
@@ -1716,7 +1687,7 @@ XGI330_TVDataStruct  XGI_ExtHiTVData[]=
 
 };
 
-XGI330_TVDataStruct  XGI_ExtYPbPr525iData[]=
+struct XGI330_TVDataStruct  XGI_ExtYPbPr525iData[] =
 {
  {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
  {   12,  5,  858, 403,1270, 420, 171,   0, 171},
@@ -1729,7 +1700,7 @@ XGI330_TVDataStruct  XGI_ExtYPbPr525iData[]=
  {    3,   2,1001, 533,1250, 420,   0,   0,   0}
 };
 
-XGI330_TVDataStruct  XGI_StYPbPr525iData[]=
+struct XGI330_TVDataStruct  XGI_StYPbPr525iData[] =
 {
  {    1,   1, 858, 525,1270, 400,  50,   0, 760},
  {    1,   1, 858, 525,1270, 350,  50,   0, 640},
@@ -1738,7 +1709,7 @@ XGI330_TVDataStruct  XGI_StYPbPr525iData[]=
  {    1,   1, 858, 525,1270, 480,   0,   0, 760},
 };
 
-XGI330_TVDataStruct  XGI_ExtYPbPr525pData[]=
+struct XGI330_TVDataStruct  XGI_ExtYPbPr525pData[] =
 {
  {    9,  5, 1001, 453,1270, 420, 171,   0, 171},
  {   12,  5,  858, 403,1270, 420, 171,   0, 171},
@@ -1751,7 +1722,7 @@ XGI330_TVDataStruct  XGI_ExtYPbPr525pData[]=
  {    3,   2,1001, 533,1270, 420,   0,   0,   0}
  };
 
-XGI330_TVDataStruct  XGI_StYPbPr525pData[]=
+struct XGI330_TVDataStruct  XGI_StYPbPr525pData[] =
 {
  {    1,   1,1716, 525,1270, 400,  50,   0, 760},
  {    1,   1,1716, 525,1270, 350,  50,   0, 640},
@@ -1760,7 +1731,7 @@ XGI330_TVDataStruct  XGI_StYPbPr525pData[]=
  {    1,   1,1716, 525,1270, 480,   0,   0, 760},
 };
 
-XGI330_TVDataStruct  XGI_ExtYPbPr750pData[]=
+struct XGI330_TVDataStruct  XGI_ExtYPbPr750pData[] =
 {
  {    3,   1, 935, 470,1130, 680,  50,   0,   0},       /* 00 (320x200,320x400,640x200,640x400) */
  {   24,   7, 935, 420,1130, 680,  50,   0,   0},       /* 01 (320x350,640x350) */
@@ -1775,7 +1746,7 @@ XGI330_TVDataStruct  XGI_ExtYPbPr750pData[]=
  {   10,   9,1320, 830,1130, 640,  50,   0,   0}
 };
 
-XGI330_TVDataStruct  XGI_StYPbPr750pData[]=
+struct XGI330_TVDataStruct  XGI_StYPbPr750pData[] =
 {
  {    1,   1,1650, 750,1280, 400,  50,   0, 760},
  {    1,   1,1650, 750,1280, 350,  50,   0, 640},
@@ -1784,7 +1755,7 @@ XGI330_TVDataStruct  XGI_StYPbPr750pData[]=
  {    1,   1,1650, 750,1280, 480,   0,   0, 760},
 };
 
-UCHAR XGI330_NTSCTiming[] = {
+unsigned char XGI330_NTSCTiming[] = {
   0x17,0x1d,0x03,0x09,0x05,0x06,0x0c,0x0c,
   0x94,0x49,0x01,0x0a,0x06,0x0d,0x04,0x0a,
   0x06,0x14,0x0d,0x04,0x0a,0x00,0x85,0x1b,
@@ -1794,7 +1765,7 @@ UCHAR XGI330_NTSCTiming[] = {
   0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x50,
   0x00,0x40,0x44,0x00,0xdb,0x02,0x3b,0x00};
 
-UCHAR XGI330_PALTiming[] = {
+unsigned char XGI330_PALTiming[] = {
   0x21,0x5A,0x35,0x6e,0x04,0x38,0x3d,0x70,
   0x94,0x49,0x01,0x12,0x06,0x3e,0x35,0x6d,
   0x06,0x14,0x3e,0x35,0x6d,0x00,0x45,0x2b,
@@ -1804,7 +1775,7 @@ UCHAR XGI330_PALTiming[] = {
   0x60,0x80,0x14,0x90,0x8c,0x60,0x14,0x63,
   0x00,0x40,0x3e,0x00,0xe1,0x02,0x28,0x00};
 
-UCHAR XGI330_HiTVExtTiming[] =
+unsigned char XGI330_HiTVExtTiming[] =
 {
       0x2D,0x60,0x2C,0x5F,0x08,0x31,0x3A,0x64,
       0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
@@ -1818,7 +1789,7 @@ UCHAR XGI330_HiTVExtTiming[] =
 
 };
 
-UCHAR XGI330_HiTVSt1Timing[] =
+unsigned char XGI330_HiTVSt1Timing[] =
 {
       0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
       0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
@@ -1831,7 +1802,7 @@ UCHAR XGI330_HiTVSt1Timing[] =
       0x0E,0x00,0xfc,0xff,0x2d,0x00
 };
 
-UCHAR XGI330_HiTVSt2Timing[] =
+unsigned char XGI330_HiTVSt2Timing[] =
 {
       0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x64,
       0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
@@ -1844,7 +1815,7 @@ UCHAR XGI330_HiTVSt2Timing[] =
       0x27,0x00,0xFC,0xff,0x6a,0x00
 };
 
-UCHAR XGI330_HiTVTextTiming[] =
+unsigned char XGI330_HiTVTextTiming[] =
 {
       0x32,0x65,0x2C,0x5F,0x08,0x31,0x3A,0x65,
       0x28,0x02,0x01,0x3D,0x06,0x3E,0x35,0x6D,
@@ -1857,7 +1828,7 @@ UCHAR XGI330_HiTVTextTiming[] =
       0x11,0x00,0xFC,0xFF,0x32,0x00
 };
 
-UCHAR XGI330_YPbPr750pTiming[] =
+unsigned char XGI330_YPbPr750pTiming[] =
 {
       0x30,0x1d,0xe8,0x09,0x09,0xed,0x0c,0x0c,
       0x98,0x0a,0x01,0x0c,0x06,0x0d,0x04,0x0a,
@@ -1870,7 +1841,7 @@ UCHAR XGI330_YPbPr750pTiming[] =
       0x11,0x00,0xfc,0xff,0x32,0x00
 };
 
-UCHAR XGI330_YPbPr525pTiming[] =
+unsigned char XGI330_YPbPr525pTiming[] =
 {
       0x3E,0x11,0x06,0x09,0x0b,0x0c,0x0c,0x0c,
       0x98,0x0a,0x01,0x0d,0x06,0x0d,0x04,0x0a,
@@ -1883,7 +1854,7 @@ UCHAR XGI330_YPbPr525pTiming[] =
       0x11,0x00,0xFC,0xFF,0x32,0x00
 };
 
-UCHAR XGI330_YPbPr525iTiming[] =
+unsigned char XGI330_YPbPr525iTiming[] =
 {
       0x1B,0x21,0x03,0x09,0x05,0x06,0x0C,0x0C,
       0x94,0x49,0x01,0x0A,0x06,0x0D,0x04,0x0A,
@@ -1897,7 +1868,7 @@ UCHAR XGI330_YPbPr525iTiming[] =
 
 };
 
-UCHAR XGI330_HiTVGroup3Data[] =
+unsigned char XGI330_HiTVGroup3Data[] =
 {
       0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x5F,
       0x05,0x21,0xB2,0xB2,0x55,0x77,0x2A,0xA6,
@@ -1909,7 +1880,7 @@ UCHAR XGI330_HiTVGroup3Data[] =
       0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
 };
 
-UCHAR XGI330_HiTVGroup3Simu[] =
+unsigned char XGI330_HiTVGroup3Simu[] =
 {
       0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0x95,
       0xDB,0x20,0xB8,0xB8,0x55,0x47,0x2A,0xA6,
@@ -1921,7 +1892,7 @@ UCHAR XGI330_HiTVGroup3Simu[] =
       0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
 };
 
-UCHAR XGI330_HiTVGroup3Text[] =
+unsigned char XGI330_HiTVGroup3Text[] =
 {
       0x00,0x1A,0x22,0x63,0x62,0x22,0x08,0xA7,
       0xF5,0x20,0xCE,0xCE,0x55,0x47,0x2A,0xA6,
@@ -1933,7 +1904,7 @@ UCHAR XGI330_HiTVGroup3Text[] =
       0x18,0x05,0x18,0x05,0x4C,0xA8,0x01
 };
 
-UCHAR XGI330_Ren525pGroup3[] =
+unsigned char XGI330_Ren525pGroup3[] =
 {
   0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x13,
   0xB1,0x41,0x62,0x62,0xFF,0xF4,0x45,0xa6,
@@ -1945,7 +1916,7 @@ UCHAR XGI330_Ren525pGroup3[] =
   0x1a,0x1F,0x25,0x2a,0x4C,0xAA,0x01
 };
 
-UCHAR XGI330_Ren750pGroup3[] =
+unsigned char XGI330_Ren750pGroup3[] =
 {
   0x00,0x14,0x15,0x25,0x55,0x15,0x0b,0x7a,
   0x54,0x41,0xE7,0xE7,0xFF,0xF4,0x45,0xa6,
@@ -1957,7 +1928,7 @@ UCHAR XGI330_Ren750pGroup3[] =
   0x18,0x1D,0x23,0x28,0x4C,0xAA,0x01
 };
 
-XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[]=
+struct XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[] =
 {
 {{0x00,0x00}},
 {{0x00,0x00}},
@@ -1977,7 +1948,7 @@ XGI_PanelDelayTblStruct XGI330_PanelDelayTbl[]=
 {{0x00,0x00}}
 };
 
-XGI330_LVDSDataStruct  XGI330_LVDS320x480Data_1[]=
+struct XGI330_LVDSDataStruct  XGI330_LVDS320x480Data_1[] =
 {
  {848, 433,400,525},
  {848, 389,400,525},
@@ -1990,7 +1961,7 @@ XGI330_LVDSDataStruct  XGI330_LVDS320x480Data_1[]=
  {800, 525,1000, 635}
 };
 
-XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_1[]=
+struct XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_1[] =
 {
  {848, 433,1060, 629},
  {848, 389,1060, 629},
@@ -2003,7 +1974,7 @@ XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_1[]=
  {800, 525,1000, 635}
 };
 
-XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_2[]=
+struct XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_2[] =
 {
  {1056, 628,1056, 628},
  {1056, 628,1056, 628},
@@ -2016,7 +1987,7 @@ XGI330_LVDSDataStruct  XGI330_LVDS800x600Data_2[]=
  {800, 525,1000, 635}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_1[] =
 {
  { 960 , 438 , 1344 , 806 } ,	/* 00 (320x200,320x400,640x200,640x400) */
  { 960 , 388 , 1344 , 806 } ,	/* 01 (320x350,640x350) */
@@ -2028,7 +1999,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_1[]=
 };
 
 
-XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_2[] =
 {
  {1344, 806,1344, 806},
  {1344, 806,1344, 806},
@@ -2041,7 +2012,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1024x768Data_2[]=
  {800, 525,1280, 813}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_1[] =
 {
  {1048, 442,1688, 1066},
  {1048, 392,1688, 1066},
@@ -2053,7 +2024,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_1[]=
  {1688, 1066,1688, 1066}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_2[] =
 {
  {1344, 806,1344, 806},
  {1344, 806,1344, 806},
@@ -2066,7 +2037,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x1024Data_2[]=
  {800, 525,1280, 813}
 };
 /*
-XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_1[] =
 {
  {768,438,1408,806},
  {768,388,1408,806},
@@ -2079,7 +2050,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_1[]=
  {1408,806,1408,806}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_2[] =
 {
  {1408, 806,1408, 806},
  {1408, 806,1408, 806},
@@ -2092,7 +2063,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768Data_2[]=
  {1408, 806,1408, 806}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_1[] =
 {
  {704, 438,1344, 806},
  {704, 388,1344, 806},
@@ -2105,7 +2076,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_1[]=
  {1344, 806,1344, 806}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_2[] =
 {
  {1344, 806,1344, 806},
  {1344, 806,1344, 806},
@@ -2118,7 +2089,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768NData_2[]=
  {1344, 806,1344, 806}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_1[] =
 {
  {1048,438,1688,806},
  {1048,388,1688,806},
@@ -2131,7 +2102,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_1[]=
  {1688,806,1688,806}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_2[] =
 {
  {1688,806,1688,806},
  {1688,806,1688,806},
@@ -2144,7 +2115,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1280x768SData_2[]=
  {1688,806,1688,806}
 };
 */
-XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_1[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_1[] =
 {
  {928,416,1688,1066},
  {928,366,1688,1066},
@@ -2157,7 +2128,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_1[]=
  {1688,1066,1688,1066}
 };
 
-XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_2[]=
+struct XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_2[] =
 {
  {1688,1066,1688,1066},
  {1688,1066,1688,1066},
@@ -2170,7 +2141,7 @@ XGI330_LVDSDataStruct  XGI_LVDS1400x1050Data_2[]=
  {1688,1066,1688,1066}
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[] =
 {      /* ;;[ycchen] 12/05/02 LCDHTxLCDVT=2048x1320 */
         {        1088,520,2048,1320      },/* 00 (320x200,320x400,640x200,640x400) */
         {        1088,470,2048,1320      },/* 01 (320x350,640x350) */
@@ -2184,7 +2155,7 @@ XGI330_LVDSDataStruct XGI_LVDS1600x1200Data_1[]=
         {        2048,1320,2048,1320     } /* 09 (1600x1200) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDSNoScalingData[]=
+struct XGI330_LVDSDataStruct XGI_LVDSNoScalingData[] =
 {
         {        800,449,800,449             }, /* 00 (320x200,320x400,640x200,640x400) */
         {        800,449,800,449             }, /* 01 (320x350,640x350) */
@@ -2199,7 +2170,7 @@ XGI330_LVDSDataStruct XGI_LVDSNoScalingData[]=
         {        1688,806,1688,806           }  /* 0A (1280x768x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[] =
 {
 	{960,438,1312,800  }, /* 00 (320x200,320x400,640x200,640x400) */
         {960,388,1312,800  }, /* 01 (320x350,640x350) */
@@ -2211,7 +2182,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Data_1x75[]=
 };
 
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[] =
 {
         {1312,800,1312,800}, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1312,800,1312,800}, /* ; 01 (320x350,640x350) */
@@ -2222,7 +2193,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Data_2x75[]=
         {1312,800,1312,800}, /* ; 06 (512x384,1024x768) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[] =
 {
         {1048,442,1688,1066  }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1048,392,1688,1066  }, /* ; 01 (320x350,640x350) */
@@ -2234,7 +2205,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_1x75[]=
         {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[] =
 {
         {1688,1066,1688,1066 }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1688,1066,1688,1066 }, /* ; 01 (320x350,640x350) */
@@ -2246,7 +2217,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Data_2x75[]=
         {1688,1066,1688,1066 }, /* ; 06; 07 (640x512,1280x1024) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[]=
+struct XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[] =
 {
         {800,449,800,449     }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {800,449,800,449     }, /* ; 01 (320x350,640x350) */
@@ -2261,7 +2232,7 @@ XGI330_LVDSDataStruct XGI_LVDSNoScalingDatax75[]=
         {1688,806,1688,806   }, /* ; 0A (1280x768x75Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[] =
 {
 	{      0,1048,   0, 771     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      0,1048,   0, 771     }, /* 01 (320x350,640x350) */
@@ -2272,7 +2243,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1[]=
         {      0,1048, 805, 770     }  /* 06 (1024x768x60Hz) */
 } ;
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[] =
 {
     	{      1142, 856, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1142, 856, 597, 562     }, /* 01 (320x350,640x350) */
@@ -2283,7 +2254,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2[]=
         {         0,1048, 805, 771     }  /* 06 (1024x768x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[] =
 {
     	{       320,  24, 622, 587     }, /* 00 (320x200,320x400,640x200,640x400) */
         {       320,  24, 597, 562     }, /* 01 (320x350,640x350) */
@@ -2292,7 +2263,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3[]=
         {       320,  24, 722, 687     }  /* 04 (640x480x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[] =
 {
     	{      0,1328,    0, 1025     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      0,1328,    0, 1025     }, /* 01 (320x350,640x350) */
@@ -2305,7 +2276,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1[]=
 };
 
  /* The Display setting for DE Mode Panel */
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[] =
 {
     	{      1368,1008,752,711     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1368,1008,729,688     }, /* 01 (320x350,640x350) */
@@ -2317,7 +2288,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2[]=
         {      0000,1328,0,1025     }  /* 07 (1280x1024x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[] =
 {
     	{      0,1448,0,1051     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      0,1448,0,1051     }, /* 01 (320x350,640x350) */
@@ -2330,7 +2301,7 @@ XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_1[]=
         {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[] =
 {
     	{      1308,1068, 781, 766     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      1308,1068, 781, 766     }, /* 01 (320x350,640x350) */
@@ -2343,7 +2314,7 @@ XGI330_LVDSDataStruct XGI_LVDS1400x1050Des_2[]=
         {      0,1448,0,1051     }  /* 08 (1400x1050x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[] =
 {
     	{      0,1664,0,1201     }, /* 00 (320x200,320x400,640x200,640x400) */
         {      0,1664,0,1201     }, /* 01 (320x350,640x350) */
@@ -2359,7 +2330,7 @@ XGI330_LVDSDataStruct XGI_LVDS1600x1200Des_1[]=
 
 
 
-XGI330_LCDDataDesStruct2  XGI_LVDSNoScalingDesData[]=
+struct XGI330_LCDDataDesStruct2  XGI_LVDSNoScalingDesData[] =
 {
     	{     0, 648, 448, 405,  96,   2   }, /* 00 (320x200,320x400,640x200,640x400) */
         {     0, 648, 448, 355,  96,   2   }, /* 01 (320x350,640x350) */
@@ -2374,7 +2345,7 @@ XGI330_LCDDataDesStruct2  XGI_LVDSNoScalingDesData[]=
         {     0,1328,0,0771, 112,   6   }  /* 0A (1280x768x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[]=			/* ; 1024x768 Full-screen */
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[] =			/* ; 1024x768 Full-screen */
 {
         {0,1040,0,769}, /* ; 00 (320x200,320x400,640x200,640x400) */
         {0,1040,0,769}, /* ; 01 (320x350,640x350) */
@@ -2385,7 +2356,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_1x75[]=			/* ; 1024x768 Full-screen */
         {0,1040,0,769} /* ; 06 (1024x768x75Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[]= /* ; 1024x768 center-screen (Enh. Mode) */
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[] = /* ; 1024x768 center-screen (Enh. Mode) */
 {
         {1142, 856,622,587 }, /* 00 (320x200,320x400,640x200,640x400) */
         {1142, 856,597,562 }, /* 01 (320x350,640x350) */
@@ -2396,7 +2367,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_2x75[]= /* ; 1024x768 center-screen (E
         {   0,1048,805,771 }  /* 06 (1024x768x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[]= /* ; 1024x768 center-screen (St.Mode) */
+struct XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[] = /* ; 1024x768 center-screen (St.Mode) */
 {
         {320,24,622,587  }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {320,24,597,562  }, /* ; 01 (320x350,640x350) */
@@ -2405,7 +2376,7 @@ XGI330_LVDSDataStruct XGI_LVDS1024x768Des_3x75[]= /* ; 1024x768 center-screen (S
         {320,24,722,687  } /* ; 04 (640x480x60Hz) */
 };
 
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[]=
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[] =
 {
         {0,1296,0,1025}, /* ; 00 (320x200,320x400,640x200,640x400) */
         {0,1296,0,1025}, /* ; 01 (320x350,640x350) */
@@ -2418,7 +2389,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_1x75[]=
 };
 
 /* The Display setting for DE Mode Panel */
-XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[]=   /* [ycchen] 02/18/03 Set DE as default */
+struct XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[] =   /* [ycchen] 02/18/03 Set DE as default */
 {
         {1368,976,752,711 }, /* ; 00 (320x200,320x400,640x200,640x400) */
         {1368,976,729,688 }, /* ; 01 (320x350,640x350) */
@@ -2430,7 +2401,7 @@ XGI330_LVDSDataStruct XGI_LVDS1280x1024Des_2x75[]=   /* [ycchen] 02/18/03 Set DE
         {0,1296,0,1025    } /* ; 07 (1280x1024x75Hz) */
 };
 
-XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[]=  /* Scaling LCD 75Hz */
+struct XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[] =  /* Scaling LCD 75Hz */
 {
        { 0,648,448,405,96,2  }, /* ; 00 (320x200,320x400,640x200,640x400) */
        { 0,648,448,355,96,2  }, /* ; 01 (320x350,640x350) */
@@ -2445,7 +2416,7 @@ XGI330_LCDDataDesStruct2 XGI_LVDSNoScalingDesDatax75[]=  /* Scaling LCD 75Hz */
        { 0,1328,0,771,112,6  }  /* ; 0A (1280x768x75Hz) */
 };
 
-XGI330_LVDSDataStruct  XGI330_LVDS640x480Data_1[]=
+struct XGI330_LVDSDataStruct  XGI330_LVDS640x480Data_1[] =
 {
  {800, 449, 800, 449},
  {800, 449, 800, 449},
@@ -2458,7 +2429,7 @@ XGI330_LVDSDataStruct  XGI330_LVDS640x480Data_1[]=
  {1056, 628,1056, 628}
 };
 
-XGI330_CHTVDataStruct  XGI_CHTVUNTSCData[]=
+struct XGI330_CHTVDataStruct  XGI_CHTVUNTSCData[] =
 {
  {840, 600, 840, 600},
  {840, 600, 840, 600},
@@ -2468,7 +2439,7 @@ XGI330_CHTVDataStruct  XGI_CHTVUNTSCData[]=
  {1064, 750,1064, 750}
 };
 
-XGI330_CHTVDataStruct  XGI_CHTVONTSCData[]=
+struct XGI330_CHTVDataStruct  XGI_CHTVONTSCData[] =
 {
  {840, 525, 840, 525},
  {840, 525, 840, 525},
@@ -2478,7 +2449,7 @@ XGI330_CHTVDataStruct  XGI_CHTVONTSCData[]=
  {1040, 700,1040, 700}
 };
 
-XGI330_CHTVDataStruct  XGI_CHTVUPALData[]=
+struct XGI330_CHTVDataStruct  XGI_CHTVUPALData[] =
 {
  {1008, 625,1008, 625},
  {1008, 625,1008, 625},
@@ -2488,7 +2459,7 @@ XGI330_CHTVDataStruct  XGI_CHTVUPALData[]=
  {936, 836, 936, 836}
 };
 
-XGI330_CHTVDataStruct  XGI_CHTVOPALData[]=
+struct XGI330_CHTVDataStruct  XGI_CHTVOPALData[] =
 {
  {1008, 625,1008, 625},
  {1008, 625,1008, 625},
@@ -2498,7 +2469,7 @@ XGI330_CHTVDataStruct  XGI_CHTVOPALData[]=
  {960, 750, 960, 750}
 };
 
-XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_1_H[]=
+struct XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_1_H[] =
 {
 	        /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }}, /* 00 (320x) */
@@ -2511,7 +2482,7 @@ XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_1_H[]=
                 {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
 };
 
-XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_1_H[]=
+struct XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_1_H[] =
 {
 		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }}, /* 00 (320x) */
@@ -2525,7 +2496,7 @@ XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_1_H[]=
                 {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
 };
 
-XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_2_H[]=
+struct XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_2_H[] =
 {
 		/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }}, /* 00 (320x) */
@@ -2538,7 +2509,7 @@ XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11024x768_2_H[]=
                 {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* 07 (1024x) */
 };
 
-XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_2_H[]=
+struct XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_2_H[] =
 {
                 /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }}, /* 00 (320x) */
@@ -2552,7 +2523,7 @@ XGI_LVDSCRT1HDataStruct  XGI_LVDSCRT11280x1024_2_H[]=
                 {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* 08 (1280x) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[] =
 {               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x47,0x27,0x8B,0x2C,0x1A,0x00,0x05,0x00 }}, /* 00 (320x) */
                 {{      0x47,0x27,0x8B,0x30,0x1E,0x00,0x05,0x00 }}, /* 01 (360x) */
@@ -2566,7 +2537,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_1_H[]=
                 {{      0xCE,0xAE,0x92,0xB3,0x01,0x00,0x03,0x00 }} /* 09 (1400x) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[] =
 {               /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 00 (320x) */
                 {{      0x76,0x3F,0x83,0x45,0x8C,0x00,0x41,0x00 }}, /* 01 (360x) */
@@ -2580,7 +2551,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11400x1050_2_H[]=
                 {{      0xCE,0xAE,0x92,0xBC,0x0A,0x00,0x03,0x00 }} /* 09 (1400x) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[] =
 /* ;302lv channelA [ycchen] 12/05/02 LCDHT=2048 */
 {   /* ; CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
                 {{      0x5B,0x27,0x9F,0x32,0x0A,0x00,0x01,0x00 }},/* 00 (320x) */
@@ -2596,7 +2567,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11600x1200_1_H[]=
 		{{      0xFB,0xC7,0x9F,0xC9,0x81,0x00,0x07,0x00 }} /* 0A (1600x) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[] =
 {               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
                 {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }}, /* 00 (x350) */
                 {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }}, /* 01 (x400) */
@@ -2605,7 +2576,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_V[]=
                 {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[] =
 {               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
                 {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }}, /* 00 (x350) */
                 {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }}, /* 01 (x400) */
@@ -2614,7 +2585,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_V[]=
                 {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* 04 (x768) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[] =
 {               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
                 {{       0x86,0x1F,0x5E,0x82,0x5D,0x87,0x00     }}, /* 00 (x350) */
                 {{       0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30     }}, /* 01 (x400) */
@@ -2624,7 +2595,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_V[]=
                 {{       0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* 05 (x1024) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[] =
 {               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
                 {{      0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1      }}, /* 00 (x350) */
                 {{      0x28,0xD2,0xC8,0x8C,0xC7,0xF2,0x81      }}, /* 01 (x400) */
@@ -2634,7 +2605,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_V[]=
                 {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* 05 (x1024) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[] =
 {               /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
                 {{      0x6C,0x1F,0x60,0x84,0x5D,0x6D,0x10      }}, /* 00 (x350) */
                 {{      0x9E,0x1F,0x93,0x86,0x8F,0x9F,0x30      }}, /* 01 (x400) */
@@ -2645,7 +2616,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_1_V[]=
                 {{      0x28,0x10,0x1A,0x80,0x19,0x29,0x0F      }} /* 06 (x1050) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[] =
 {              /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
                 {{      0x28,0x92,0xB6,0x83,0xB5,0xCF,0x81      }}, /* 00 (x350) */
                 {{      0x28,0x92,0xD5,0x82,0xD4,0xEE,0x81      }}, /* 01 (x400) */
@@ -2656,7 +2627,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11400x1050_2_V[]=
                 {{      0x28,0x10,0x1A,0x87,0x19,0x29,0x8F      }} /* 06 (x1050) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[] =
 {
                /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
                 {{      0xd4,0x1F,0x81,0x84,0x5D,0xd5,0x10      }}, /* 00 (x350) */
@@ -2669,7 +2640,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11600x1200_1_V[]=
                 {{      0x26,0x11,0xd3,0x86,0xaF,0x27,0x3f      }} /* 07 (x1200) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[] =
 { 	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
     {{      0x4B,0x27,0x8F,0x32,0x1B,0x00,0x45,0x00 }},/* ; 00 (320x) */
     {{      0x4B,0x27,0x8F,0x2B,0x03,0x00,0x44,0x00 }},/* ; 01 (360x) */
@@ -2681,7 +2652,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_1_Hx75[]=
     {{      0x9F,0x7F,0x83,0x85,0x91,0x00,0x02,0x00 }} /* ; 07 (1024x) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[] =
 {	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A+CR09(5->7) */
     {{      0x97,0x1F,0x60,0x87,0x5D,0x83,0x10      }},/* ; 00 (x350) */
     {{      0xB4,0x1F,0x92,0x89,0x8F,0xB5,0x30      }},/* ; 01 (x400) */
@@ -2690,7 +2661,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_1_Vx75[]=
     {{      0x1E,0xF5,0x00,0x83,0xFF,0x1F,0x90      }} /* ; 04 (x768) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[] =
 {       /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
     {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 00 (320x) */
     {{      0x63,0x27,0x87,0x3B,0x8C,0x00,0x01,0x00 }},/* ; 01 (360x) */
@@ -2702,7 +2673,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11024x768_2_Hx75[]=
     {{      0xA3,0x7F,0x87,0x86,0x97,0x00,0x02,0x00 }} /* ; 07 (1024x) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[] =
 {       /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
     {{      0x24,0xBB,0x31,0x87,0x5D,0x25,0x30      }},/* ; 00 (x350) */
     {{      0x24,0xBB,0x4A,0x80,0x8F,0x25,0x30      }},/* ; 01 (x400) */
@@ -2711,7 +2682,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11024x768_2_Vx75[]=
     {{      0x24,0xF5,0x02,0x88,0xFF,0x25,0x90      }} /* ; 04 (x768) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[] =
 {      /* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
     {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 00 (320x) */
     {{      0x56,0x27,0x9A,0x30,0x1E,0x00,0x05,0x00 }},/* ; 01 (360x) */
@@ -2724,7 +2695,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_1_Hx75[]=
     {{      0xCE,0x9F,0x92,0xA5,0x17,0x00,0x07,0x00 }} /* ; 08 (1280x) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[] =
 {	/* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
     {{      0x86,0xD1,0xBC,0x80,0xBB,0xE5,0x00      }},/* ; 00 (x350) */
     {{      0xB8,0x1F,0x90,0x84,0x8F,0xB9,0x30      }},/* ; 01 (x400) */
@@ -2734,7 +2705,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_1_Vx75[]=
     {{      0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9      }} /* ; 05 (x1024) */
 };
 
-XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[]=
+struct XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[] =
 {
 	/* CR00,CR02,CR03,CR04,CR05,SR0B,SR0C,SR0E */
     {{      0x7E,0x3B,0x9A,0x44,0x12,0x00,0x01,0x00 }},/* ; 00 (320x) */
@@ -2748,7 +2719,7 @@ XGI_LVDSCRT1HDataStruct XGI_LVDSCRT11280x1024_2_Hx75[]=
     {{      0xCE,0x9F,0x92,0xA8,0x16,0x00,0x07,0x00 }} /* ; 08 (1280x) */
 };
 
-XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[]=
+struct XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[] =
 {
         /* CR06,CR07,CR10,CR11,CR15,CR16,SR0A */
      {{     0x28,0xD2,0xAF,0x83,0xAE,0xD8,0xA1     }},/* ; 00 (x350) */
@@ -2759,7 +2730,7 @@ XGI_LVDSCRT1VDataStruct XGI_LVDSCRT11280x1024_2_Vx75[]=
      {{     0x28,0x5A,0x13,0x87,0xFF,0x29,0xA9     }} /* ; 05 (x1024) */
 };
 
-XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UNTSC[]=
+struct XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UNTSC[] =
 {
  {{0x64,0x4f,0x88,0x56,0x9f,0x56,0x3e,
     0xe8,0x84,0x8f,0x57,0x20,0x00,0x01,0x00 }},
@@ -2775,7 +2746,7 @@ XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UNTSC[]=
    0x90,0x8c,0x57,0xed,0x20,0x00,0x06,0x01 }}
 };
 
-XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1ONTSC[]=
+struct XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1ONTSC[] =
 {
  {{0x64,0x4f,0x88,0x5a,0x9f,0x0b,0x3e,
     0xc0,0x84,0x8f,0x0c,0x20,0x00,0x01,0x00 }},
@@ -2791,7 +2762,7 @@ XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1ONTSC[]=
    0x7f,0x86,0x57,0xbb,0x00,0x00,0x06,0x01 }}
 };
 
-XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UPAL[]=
+struct XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UPAL[] =
 {
  {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
     0xf8,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
@@ -2807,7 +2778,7 @@ XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1UPAL[]=
    0xc8,0x8c,0x57,0xe9,0x20,0x00,0x05,0x01 }}
 };
 
-XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1OPAL[]=
+struct XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1OPAL[] =
 {
  {{0x79,0x4f,0x9d,0x5a,0x90,0x6f,0x3e,
     0xf0,0x83,0x8f,0x70,0x20,0x00,0x05,0x00 }},
@@ -2824,7 +2795,7 @@ XGI_LVDSCRT1DataStruct  XGI_CHTVCRT1OPAL[]=
 };
 
 /*add for new UNIVGABIOS*/
-XGI330_LCDDataTablStruct XGI_LCDDataTable[]=
+struct XGI330_LCDDataTablStruct XGI_LCDDataTable[] =
 {
   {Panel1024x768,0x0019,0x0001,0},  /* XGI_ExtLCD1024x768Data */
   {Panel1024x768,0x0019,0x0000,1},  /* XGI_StLCD1024x768Data */
@@ -2848,7 +2819,7 @@ XGI330_LCDDataTablStruct XGI_LCDDataTable[]=
   {0xFF,0x0000,0x0000,0}   		/* End of table */
 };
 
-XGI330_LCDDataTablStruct XGI_LCDDesDataTable[]=
+struct XGI330_LCDDataTablStruct XGI_LCDDesDataTable[] =
 {
   {Panel1024x768,0x0019,0x0001,0}, /* XGI_ExtLCDDes1024x768Data */
   {Panel1024x768,0x0019,0x0000,1}, /* XGI_StLCDDes1024x768Data */
@@ -2873,7 +2844,7 @@ XGI330_LCDDataTablStruct XGI_LCDDesDataTable[]=
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[]=
+struct XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[] =
 {
   {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_H */
   {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_H */
@@ -2889,7 +2860,7 @@ XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_H[]=
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[]=
+struct XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[] =
 {
   {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDSCRT11024x768_1_V */
   {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDSCRT11024x768_2_V */
@@ -2905,7 +2876,7 @@ XGI330_LCDDataTablStruct XGI_EPLLCDCRT1Ptr_V[]=
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[]=
+struct XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[] =
 {
   {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Data_1 */
   {Panel1024x768,0x0018,0x0010,1}, /* XGI_LVDS1024x768Data_2 */
@@ -2923,7 +2894,7 @@ XGI330_LCDDataTablStruct XGI_EPLLCDDataPtr[]=
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[]=
+struct XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[] =
 {
   {Panel1024x768,0x0018,0x0000,0}, /* XGI_LVDS1024x768Des_1 */
   {Panel1024x768,0x0618,0x0410,1}, /* XGI_LVDS1024x768Des_3 */
@@ -2943,14 +2914,14 @@ XGI330_LCDDataTablStruct XGI_EPLLCDDesDataPtr[]=
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_LCDDataTablStruct XGI_EPLCHLCDRegPtr[]=
+struct XGI330_LCDDataTablStruct XGI_EPLCHLCDRegPtr[] =
 {
   {Panel1024x768,0x0000,0x0000,0}, /* XGI_CH7017LV1024x768 */
   {Panel1400x1050,0x0000,0x0000,1}, /* XGI_CH7017LV1400x1050 */
   {0xFF,0x0000,0x0000,0}
 };
 
-XGI330_TVDataTablStruct XGI_TVDataTable[]=
+struct XGI330_TVDataTablStruct XGI_TVDataTable[] =
 {
  {0x09E1,0x0001,0},	/* XGI_ExtPALData */
  {0x09E1,0x0000,1},	/* XGI_ExtNTSCData */
@@ -2968,7 +2939,7 @@ XGI330_TVDataTablStruct XGI_TVDataTable[]=
  {0xffff,0x0000,12}  	/* END */
 };
 
-USHORT TVLenList[]=
+unsigned short TVLenList[] =
 {
    LVDSCRT1Len_H,
    LVDSCRT1Len_V,
@@ -2981,7 +2952,7 @@ USHORT TVLenList[]=
 } ;
 
 /* Chrontel 7017 TV CRT1 Timing List */
-XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[]=
+struct XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[] =
 {
   {0x0011,0x0000,0}, /* XGI_CHTVCRT1UNTSC */
   {0x0011,0x0010,1}, /* XGI_CHTVCRT1ONTSC */
@@ -2991,7 +2962,7 @@ XGI330_TVDataTablStruct XGI_EPLCHTVCRT1Ptr[]=
 };
 
 /* ;;Chrontel 7017 TV Timing List */
-XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[]=
+struct XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[] =
 {
   {0x0011,0x0000,0}, /* XGI_CHTVUNTSCData */
   {0x0011,0x0010,1}, /* XGI_CHTVONTSCData */
@@ -3001,7 +2972,7 @@ XGI330_TVDataTablStruct XGI_EPLCHTVDataPtr[]=
 };
 
 /* ;;Chrontel 7017 TV Reg. List */
-XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[]=
+struct XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[] =
 {
   {0x0011,0x0000,0}, /* XGI_CHTVRegUNTSC */
   {0x0011,0x0010,1}, /* XGI_CHTVRegONTSC */
@@ -3010,7 +2981,7 @@ XGI330_TVDataTablStruct XGI_EPLCHTVRegPtr[]=
   {0xFFFF,0x0000,4}
 };
 
-USHORT LCDLenList[]=
+unsigned short LCDLenList[] =
 {
    LVDSCRT1Len_H,
    LVDSCRT1Len_V,
@@ -3024,7 +2995,7 @@ USHORT LCDLenList[]=
    0
 } ;
 
-XGI330_LCDCapStruct  XGI660_LCDDLCapList[]=  /* 660, Dual link */
+struct XGI330_LCDCapStruct  XGI660_LCDDLCapList[] =  /* 660, Dual link */
 {
 /* LCDCap1024x768 */
 		{Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
@@ -3056,7 +3027,7 @@ XGI330_LCDCapStruct  XGI660_LCDDLCapList[]=  /* 660, Dual link */
 		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
 };
 
-XGI330_LCDCapStruct  XGI_LCDDLCapList[]=  /* Dual link only */
+struct XGI330_LCDCapStruct  XGI_LCDDLCapList[] =  /* Dual link only */
 {
 /* LCDCap1024x768 */
 		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
@@ -3088,7 +3059,7 @@ XGI330_LCDCapStruct  XGI_LCDDLCapList[]=  /* Dual link only */
 		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
 };
 
-XGI330_LCDCapStruct  XGI660_LCDCapList[]=
+struct XGI330_LCDCapStruct  XGI660_LCDCapList[] =
 {
 /* LCDCap1024x768 */
                 {Panel1024x768, DefaultLCDCap, 0, 0x014, 0x88, 0x06, VCLK65,
@@ -3120,7 +3091,7 @@ XGI330_LCDCapStruct  XGI660_LCDCapList[]=
 		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
 };
 
-XGI330_LCDCapStruct  XGI_LCDCapList[]=
+struct XGI330_LCDCapStruct  XGI_LCDCapList[] =
 {
 /* LCDCap1024x768 */
 		{Panel1024x768, DefaultLCDCap, 0, 0x012, 0x88, 0x06, VCLK65,
@@ -3152,7 +3123,7 @@ XGI330_LCDCapStruct  XGI_LCDCapList[]=
 		0x30, 0x10, 0x5A, 0x10, 0x10, 0x0A, 0xC0, 0x28, 0x10}
 };
 
-XGI21_LVDSCapStruct XGI21_LCDCapList[]=
+struct XGI21_LVDSCapStruct XGI21_LCDCapList[] =
 {
     {DisableLCD24bpp + LCDPolarity,
      2160,1250,1600,1200,  64,  1,  192,   3,
@@ -3181,7 +3152,7 @@ XGI21_LVDSCapStruct XGI21_LCDCapList[]=
 
 };
 
-XGI_Ext2Struct XGI330_RefIndex[]=
+struct XGI_Ext2Struct XGI330_RefIndex[] =
 {
 {Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x59, 320, 200},/* 00 */
 {Support32Bpp + SupportAllCRT2 + SyncPN,			RES320x200,	 VCLK25_175, 0x00,0x10,0x00, 320, 400},/* 01 */
@@ -3260,7 +3231,7 @@ XGI_Ext2Struct XGI330_RefIndex[]=
 
 
 
-XGI330_VCLKDataStruct XGI330_VCLKData[]=
+struct XGI330_VCLKDataStruct XGI330_VCLKData[] =
 {
  { 0x1b,0xe1, 25}, /* 0x0 */
  { 0x4e,0xe4, 28}, /* 0x1 */
@@ -3344,7 +3315,7 @@ XGI330_VCLKDataStruct XGI330_VCLKData[]=
  { 0x3b,0x61,108}  /* 0x4f */
 };
 
-XGI_VBVCLKDataStruct XGI330_VBVCLKData[]=
+struct XGI_VBVCLKDataStruct XGI330_VBVCLKData[] =
 {
  { 0x1b,0xe1, 25}, /* 0x0 */
  { 0x4e,0xe4, 28}, /* 0x1 */
@@ -3422,9 +3393,11 @@ XGI_VBVCLKDataStruct XGI330_VBVCLKData[]=
  { 0x70,0x44,108}, /* 0x49 chiawen for 1400x1050*/
 };
 
-UCHAR XGI330_ScreenOffset[]={ 0x14,0x19,0x20,0x28,0x32,0x40,0x50,0x64,0x78,0x80,0x2d,0x35,0x57,0x48 };
+unsigned char XGI330_ScreenOffset[] = { 0x14, 0x19, 0x20, 0x28, 0x32, 0x40,
+					0x50, 0x64, 0x78, 0x80, 0x2d, 0x35,
+					0x57, 0x48};
 
-XGI_StResInfoStruct XGI330_StResInfo[]=
+struct XGI_StResInfoStruct XGI330_StResInfo[] =
 {
  { 640,400},
  { 640,350},
@@ -3433,7 +3406,7 @@ XGI_StResInfoStruct XGI330_StResInfo[]=
  { 640,480}
 };
 
-XGI_ModeResInfoStruct XGI330_ModeResInfo[]=
+struct XGI_ModeResInfoStruct XGI330_ModeResInfo[] =
 {
  {  320, 200, 8, 8},
  {  320, 240, 8, 8},
@@ -3460,10 +3433,10 @@ XGI_ModeResInfoStruct XGI330_ModeResInfo[]=
  { 1152, 864, 8,16}
 };
 
-UCHAR XGI330_OutputSelect =0x40;
-UCHAR XGI330_SoftSetting = 0x30;
-UCHAR XGI330_SR07=0x18;
-UCHAR XGI330New_SR15[8][8]={
+unsigned char XGI330_OutputSelect = 0x40;
+unsigned char XGI330_SoftSetting = 0x30;
+unsigned char XGI330_SR07 = 0x18;
+unsigned char XGI330New_SR15[8][8] = {
 {0x0,0x4,0x60,0x60},
 {0xf,0xf,0xf,0xf},
 {0xba,0xba,0xba,0xba},
@@ -3474,7 +3447,7 @@ UCHAR XGI330New_SR15[8][8]={
 {0x0,0xa5,0xfb,0xf6}
 };
 
-UCHAR XGI330New_CR40[5][8]={
+unsigned char XGI330New_CR40[5][8] = {
 {0x77,0x77,0x44,0x44},
 {0x77,0x77,0x44,0x44},
 {0x0,0x0,0x0,0x0},
@@ -3482,63 +3455,63 @@ UCHAR XGI330New_CR40[5][8]={
 {0x0,0x0,0xf0,0xf8}
 };
 
-UCHAR XGI330_CR49[]={0xaa,0x88};
-UCHAR XGI330_SR1F=0x0;
-UCHAR XGI330_SR21=0xa3;
-UCHAR XGI330_650_SR21=0xa7;
-UCHAR XGI330_SR22=0xfb;
-UCHAR XGI330_SR23=0xf6;
-UCHAR XGI330_SR24=0xd;
-
-UCHAR XGI660_SR21=0xa3;/* 2003.0312 */
-UCHAR XGI660_SR22=0xf3;/* 2003.0312 */
-
-UCHAR XGI330_LVDS_SR32=0x00;   /* ynlai for 650 LVDS */
-UCHAR XGI330_LVDS_SR33=0x00;	/* chiawen for 650 LVDS */
-UCHAR XGI330_650_SR31=0x40;
-UCHAR XGI330_650_SR33=0x04;
-UCHAR XGI330_CRT2Data_1_2 = 0x0;
-UCHAR XGI330_CRT2Data_4_D = 0x0;
-UCHAR XGI330_CRT2Data_4_E = 0x0;
-UCHAR XGI330_CRT2Data_4_10 = 0x80;
-USHORT XGI330_RGBSenseData = 0xd1;
-USHORT XGI330_VideoSenseData = 0xb9;
-USHORT XGI330_YCSenseData = 0xb3;
-USHORT XGI330_RGBSenseData2 = 0x0190;     /*301b*/
-USHORT XGI330_VideoSenseData2 = 0x0110;
-USHORT XGI330_YCSenseData2 = 0x016B;
-UCHAR XGI330_NTSCPhase[] = {0x21,0xed,0x8a,0x8};
-UCHAR XGI330_PALPhase[] = {0x2a,0x5,0xd3,0x0};
-UCHAR XGI330_NTSCPhase2[] = {0x21,0xF0,0x7B,0xD6};/*301b*/
-UCHAR XGI330_PALPhase2[] = {0x2a,0x09,0x86,0xe9};
-UCHAR XGI330_PALMPhase[] = {0x21,0xE4,0x2E,0x9B};   /*palmn*/
-UCHAR XGI330_PALNPhase[] = {0x21,0xF4,0x3E,0xBA};
-UCHAR XG40_I2CDefinition = 0x00 ;
-UCHAR XG20_CR97 = 0x10 ;
-
-UCHAR XG21_DVOSetting = 0x00 ;
-UCHAR XG21_CR2E = 0x00 ;
-UCHAR XG21_CR2F = 0x00 ;
-UCHAR XG21_CR46 = 0x00 ;
-UCHAR XG21_CR47 = 0x00 ;
-
-UCHAR XG27_CR97 = 0xC1 ;
-UCHAR XG27_SR36 = 0x30 ;
-UCHAR XG27_CR8F = 0x0C ;
-UCHAR XG27_CRD0[] = {0,0,0,0,0,0,0,0x82,0x00,0x66,0x01,0x00} ;
-UCHAR XG27_CRDE[] = {0,0} ;
-UCHAR XG27_SR40 = 0x04 ;
-UCHAR XG27_SR41 = 0x00 ;
-
-UCHAR XGI330_CHTVVCLKUNTSC[]={0x00 };
-
-UCHAR XGI330_CHTVVCLKONTSC[]={0x00 };
-
-UCHAR XGI330_CHTVVCLKUPAL[]={0x00 };
-
-UCHAR XGI330_CHTVVCLKOPAL[]={0x00 };
-
-UCHAR XGI7007_CHTVVCLKUNTSC[]={CH7007TVVCLK30_2,
+unsigned char XGI330_CR49[] = {0xaa, 0x88};
+unsigned char XGI330_SR1F = 0x0;
+unsigned char XGI330_SR21 = 0xa3;
+unsigned char XGI330_650_SR21 = 0xa7;
+unsigned char XGI330_SR22 = 0xfb;
+unsigned char XGI330_SR23 = 0xf6;
+unsigned char XGI330_SR24 = 0xd;
+
+unsigned char XGI660_SR21 = 0xa3;/* 2003.0312 */
+unsigned char XGI660_SR22 = 0xf3;/* 2003.0312 */
+
+unsigned char XGI330_LVDS_SR32 = 0x00;   /* ynlai for 650 LVDS */
+unsigned char XGI330_LVDS_SR33 = 0x00;	/* chiawen for 650 LVDS */
+unsigned char XGI330_650_SR31 = 0x40;
+unsigned char XGI330_650_SR33 = 0x04;
+unsigned char XGI330_CRT2Data_1_2 = 0x0;
+unsigned char XGI330_CRT2Data_4_D = 0x0;
+unsigned char XGI330_CRT2Data_4_E = 0x0;
+unsigned char XGI330_CRT2Data_4_10 = 0x80;
+unsigned short XGI330_RGBSenseData = 0xd1;
+unsigned short XGI330_VideoSenseData = 0xb9;
+unsigned short XGI330_YCSenseData = 0xb3;
+unsigned short XGI330_RGBSenseData2 = 0x0190;     /*301b*/
+unsigned short XGI330_VideoSenseData2 = 0x0110;
+unsigned short XGI330_YCSenseData2 = 0x016B;
+unsigned char XGI330_NTSCPhase[] = {0x21, 0xed, 0x8a, 0x8};
+unsigned char XGI330_PALPhase[] = {0x2a, 0x5, 0xd3, 0x0};
+unsigned char XGI330_NTSCPhase2[] = {0x21, 0xF0, 0x7B, 0xD6};/*301b*/
+unsigned char XGI330_PALPhase2[] = {0x2a, 0x09, 0x86, 0xe9};
+unsigned char XGI330_PALMPhase[] = {0x21, 0xE4, 0x2E, 0x9B};   /*palmn*/
+unsigned char XGI330_PALNPhase[] = {0x21, 0xF4, 0x3E, 0xBA};
+unsigned char XG40_I2CDefinition = 0x00 ;
+unsigned char XG20_CR97 = 0x10 ;
+
+unsigned char XG21_DVOSetting = 0x00 ;
+unsigned char XG21_CR2E = 0x00 ;
+unsigned char XG21_CR2F = 0x00 ;
+unsigned char XG21_CR46 = 0x00 ;
+unsigned char XG21_CR47 = 0x00 ;
+
+unsigned char XG27_CR97 = 0xC1 ;
+unsigned char XG27_SR36 = 0x30 ;
+unsigned char XG27_CR8F = 0x0C ;
+unsigned char XG27_CRD0[] = {0, 0, 0, 0, 0, 0, 0, 0x82, 0x00, 0x66, 0x01, 0x00};
+unsigned char XG27_CRDE[] = {0, 0};
+unsigned char XG27_SR40 = 0x04 ;
+unsigned char XG27_SR41 = 0x00 ;
+
+unsigned char XGI330_CHTVVCLKUNTSC[] = {0x00};
+
+unsigned char XGI330_CHTVVCLKONTSC[] = {0x00};
+
+unsigned char XGI330_CHTVVCLKUPAL[] = {0x00};
+
+unsigned char XGI330_CHTVVCLKOPAL[] = {0x00};
+
+unsigned char XGI7007_CHTVVCLKUNTSC[] = {CH7007TVVCLK30_2,
                                CH7007TVVCLK30_2,
                                CH7007TVVCLK30_2,
                                CH7007TVVCLK30_2,
@@ -3546,7 +3519,7 @@ UCHAR XGI7007_CHTVVCLKUNTSC[]={CH7007TVVCLK30_2,
                                CH7007TVVCLK47_8
                               };
 
-UCHAR XGI7007_CHTVVCLKONTSC[]={CH7007TVVCLK26_4,
+unsigned char XGI7007_CHTVVCLKONTSC[] = {CH7007TVVCLK26_4,
                                CH7007TVVCLK26_4,
                                CH7007TVVCLK26_4,
                                CH7007TVVCLK26_4,
@@ -3554,7 +3527,7 @@ UCHAR XGI7007_CHTVVCLKONTSC[]={CH7007TVVCLK26_4,
                                CH7007TVVCLK43_6
                               };
 
-UCHAR XGI7007_CHTVVCLKUPAL[]={CH7007TVVCLK31_5,
+unsigned char XGI7007_CHTVVCLKUPAL[] = {CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
@@ -3562,7 +3535,7 @@ UCHAR XGI7007_CHTVVCLKUPAL[]={CH7007TVVCLK31_5,
                               CH7007TVVCLK39
                              };
 
-UCHAR XGI7007_CHTVVCLKOPAL[]={CH7007TVVCLK31_5,
+unsigned char XGI7007_CHTVVCLKOPAL[] = {CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
                               CH7007TVVCLK31_5,
@@ -3570,7 +3543,7 @@ UCHAR XGI7007_CHTVVCLKOPAL[]={CH7007TVVCLK31_5,
                               CH7007TVVCLK36
                              };
 
-XGI330_VCLKDataStruct XGI_CH7007VCLKData[]=
+struct XGI330_VCLKDataStruct XGI_CH7007VCLKData[] =
 {
  { 0x60,0x36,30},  /* 0 30.2 MHZ */
  { 0x40,0x4A,28},  /* 1 28.19 MHZ */
@@ -3585,7 +3558,7 @@ XGI330_VCLKDataStruct XGI_CH7007VCLKData[]=
  { 0xFF,0x00,0 }   /* End mark      */
 };
 
-XGI330_VCLKDataStruct XGI_VCLKData[]=
+struct XGI330_VCLKDataStruct XGI_VCLKData[] =
 {
                	/* SR2B,SR2C,SR2D */
  		{      0x1B,0xE1,25               },/* 00 (25.175MHz) */
@@ -3786,7 +3759,7 @@ XGI330_VCLKDataStruct XGI_VCLKData[]=
                 {      0xFF,0x00,0                }/* End mark */
  }  ;
 
-XGI330_VCLKDataStruct XGI_VBVCLKData[]=
+struct XGI330_VCLKDataStruct XGI_VBVCLKData[] =
 {
                 {      0x1B,0xE1,25               },/* 00 (25.175MHz) */
 
@@ -3987,7 +3960,7 @@ XGI330_VCLKDataStruct XGI_VBVCLKData[]=
                 {      0xFF,0x00,0                }      /* End mark */
 };
 
-UCHAR XGI660_TVDelayList[]=
+unsigned char XGI660_TVDelayList[] =
 {
           0x44,            /* ; 0 ExtNTSCDelay */
           0x44,            /* ; 1 StNTSCDelay */
@@ -4003,7 +3976,7 @@ UCHAR XGI660_TVDelayList[]=
           0x44             /* ; B StYPbPrDealy(750p) */
 };
 
-UCHAR XGI660_TVDelayList2[]=
+unsigned char XGI660_TVDelayList2[] =
 {
           0x44,           /* ; 0 ExtNTSCDelay */
           0x44,           /* ; 1 StNTSCDelay */
@@ -4019,7 +3992,7 @@ UCHAR XGI660_TVDelayList2[]=
           0x44            /* ; B StYPbPrDealy(750p) */
 };
 
-UCHAR XGI301TVDelayList[]=
+unsigned char XGI301TVDelayList[] =
 {
 	0x22,            /* ; 0 ExtNTSCDelay */
 	0x22,            /* ; 1 StNTSCDelay */
@@ -4035,7 +4008,7 @@ UCHAR XGI301TVDelayList[]=
 	0x22            /* B StYPbPrDealy(750p) */
 };
 
-UCHAR XGI301TVDelayList2[]=
+unsigned char XGI301TVDelayList2[] =
 {
 	0x22,           /* ; 0 ExtNTSCDelay */
 	0x22,           /* ; 1 StNTSCDelay */
@@ -4052,7 +4025,7 @@ UCHAR XGI301TVDelayList2[]=
 };
 
 
-UCHAR TVAntiFlickList[]=
+unsigned char TVAntiFlickList[] =
 {/* NTSCAntiFlicker */
                       0x04,           /* ; 0 Adaptive */
                       0x00,           /* ; 1 new anti-flicker ? */
@@ -4065,7 +4038,7 @@ UCHAR TVAntiFlickList[]=
 };
 
 
-UCHAR TVEdgeList[]=
+unsigned char TVEdgeList[] =
 {
       0x00,            /* ; 0 NTSC No Edge enhance */
       0x04,            /* ; 1 NTSC Adaptive Edge enhance */
@@ -4075,7 +4048,7 @@ UCHAR TVEdgeList[]=
       0x00             /* ; 1 HiTV */
 };
 
-ULONG TVPhaseList[]=
+unsigned long TVPhaseList[] =
 {      0x08BAED21, /* ; 0 NTSC phase */
        0x00E3052A, /* ; 1 PAL phase */
        0x9B2EE421, /* ; 2 PAL-M phase */
@@ -4092,7 +4065,7 @@ ULONG TVPhaseList[]=
        0xE00A831E  /* ; D PAL-M 1024x768 */
 };
 
-UCHAR NTSCYFilter1[]=
+unsigned char NTSCYFilter1[] =
 {
 		      0x00,0xF4,0x10,0x38     ,/* 0 : 320x text mode */
                       0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
@@ -4103,7 +4076,7 @@ UCHAR NTSCYFilter1[]=
                       0xEB,0x15,0x25,0xF6     /* 6 : 800x gra. mode */
 };
 
-UCHAR PALYFilter1[]=
+unsigned char PALYFilter1[] =
 {
 		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
                       0x00,0xF4,0x10,0x38     ,/* 1 : 360x text mode */
@@ -4114,7 +4087,7 @@ UCHAR PALYFilter1[]=
                       0xFC,0xFB,0x14,0x2A     /* 6 : 800x gra. mode */
 };
 
-UCHAR PALMYFilter1[]=
+unsigned char PALMYFilter1[] =
 {
 		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
                       0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
@@ -4126,7 +4099,7 @@ UCHAR PALMYFilter1[]=
                       0xFF,0xFF,0xFF,0xFF  /* End of Table */
 };
 
-UCHAR PALNYFilter1[]=
+unsigned char PALNYFilter1[] =
 {
 		      0x00,0xF4,0x10,0x38, /* 0 : 320x text mode */
                       0x00,0xF4,0x10,0x38, /* 1 : 360x text mode */
@@ -4138,7 +4111,7 @@ UCHAR PALNYFilter1[]=
                       0xFF,0xFF,0xFF,0xFF  /* End of Table */
 };
 
-UCHAR NTSCYFilter2[]=
+unsigned char NTSCYFilter2[] =
 {
 		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
                       0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
@@ -4150,7 +4123,7 @@ UCHAR NTSCYFilter2[]=
                       0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
 };
 
-UCHAR PALYFilter2[]=
+unsigned char PALYFilter2[] =
 {
 		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
                       0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
@@ -4162,7 +4135,7 @@ UCHAR PALYFilter2[]=
                       0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
 };
 
-UCHAR PALMYFilter2[]=
+unsigned char PALMYFilter2[] =
 {
 		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
                       0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
@@ -4174,7 +4147,7 @@ UCHAR PALMYFilter2[]=
                       0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
 };
 
-UCHAR PALNYFilter2[]=
+unsigned char PALNYFilter2[] =
 {
 		      0xFF,0x03,0x02,0xF6,0xFC,0x27,0x46, /* 0 : 320x text mode */
                       0x01,0x02,0xFE,0xF7,0x03,0x27,0x3C, /* 1 : 360x text mode */
@@ -4186,14 +4159,14 @@ UCHAR PALNYFilter2[]=
                       0xFF,0xFF,0xFC,0x00,0x0F,0x22,0x28  /* 7 : 1024xgra. mode */
 };
 
-UCHAR XGI_NTSC1024AdjTime[]=
+unsigned char XGI_NTSC1024AdjTime[] =
 {
       0xa7,0x07,0xf2,0x6e,0x17,0x8b,0x73,0x53,
       0x13,0x40,0x34,0xF4,0x63,0xBB,0xCC,0x7A,
       0x58,0xe4,0x73,0xd0,0x13
 };
 
-XGI301C_Tap4TimingStruct HiTVTap4Timing[]=
+struct XGI301C_Tap4TimingStruct HiTVTap4Timing[] =
 {
 	{0,{
 	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
@@ -4208,7 +4181,7 @@ XGI301C_Tap4TimingStruct HiTVTap4Timing[]=
 	}
 };
 
-XGI301C_Tap4TimingStruct EnlargeTap4Timing[]=
+struct XGI301C_Tap4TimingStruct EnlargeTap4Timing[] =
 {
 	{0,{
 	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
@@ -4223,7 +4196,7 @@ XGI301C_Tap4TimingStruct EnlargeTap4Timing[]=
 	}
 };
 
-XGI301C_Tap4TimingStruct NoScaleTap4Timing[]=
+struct XGI301C_Tap4TimingStruct NoScaleTap4Timing[] =
 {
 	{0,{
 	0x00,0x20,0x00,0x00,0x7F,0x20,0x02,0x7F, /* ; C0-C7 */
@@ -4238,7 +4211,7 @@ XGI301C_Tap4TimingStruct NoScaleTap4Timing[]=
 	}
 };
 
-XGI301C_Tap4TimingStruct PALTap4Timing[]=
+struct XGI301C_Tap4TimingStruct PALTap4Timing[] =
 {
 	{600,  {
                 0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
@@ -4276,7 +4249,7 @@ XGI301C_Tap4TimingStruct PALTap4Timing[]=
         }
 };
 
-XGI301C_Tap4TimingStruct NTSCTap4Timing[]=
+struct XGI301C_Tap4TimingStruct NTSCTap4Timing[] =
 {
 	{480,	{
               	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
@@ -4314,7 +4287,7 @@ XGI301C_Tap4TimingStruct NTSCTap4Timing[]=
         }
 };
 
-XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[]=
+struct XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[] =
 {
 	{480,	{
               	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
@@ -4352,7 +4325,7 @@ XGI301C_Tap4TimingStruct YPbPr525pTap4Timing[]=
         }
 };
 
-XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[]=
+struct XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[] =
 {
 	{480,	{
               	0x04,0x1A,0x04,0x7E,0x03,0x1A,0x06,0x7D, /* ; C0-C7 */
@@ -4390,7 +4363,7 @@ XGI301C_Tap4TimingStruct YPbPr525iTap4Timing[]=
         }
 };
 
-XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[]=
+struct XGI301C_Tap4TimingStruct YPbPr750pTap4Timing[] =
 {        {0xFFFF,
                {
                0x05,0x19,0x05,0x7D,0x03,0x19,0x06,0x7E, /* ; C0-C7 */
diff --git a/drivers/staging/xgifb/vb_util.c b/drivers/staging/xgifb/vb_util.c
index 87531b49b73..2c40368ceee 100644
--- a/drivers/staging/xgifb/vb_util.c
+++ b/drivers/staging/xgifb/vb_util.c
@@ -1,54 +1,25 @@
-#include "osdef.h"
 #include "vb_def.h"
 #include "vgatypes.h"
 #include "vb_struct.h"
 
-#ifdef LINUX_KERNEL
 #include "XGIfb.h"
 #include <asm/io.h>
 #include <linux/types.h>
-#endif
-
-#ifdef TC
-#include <stdio.h>
-#include <string.h>
-#include <conio.h>
-#include <dos.h>
-#endif
-
-#ifdef WIN2000
-#include <dderror.h>
-#include <devioctl.h>
-#include <miniport.h>
-#include <ntddvdeo.h>
-#include <video.h>
-
-#include "xgiv.h"
-#include "dd_i2c.h"
-#include "tools.h"
-#endif
-
-#ifdef LINUX_XF86
-#include "xf86.h"
-#include "xf86PciInfo.h"
-#include "xgi.h"
-#include "xgi_regs.h"
-#endif
-
-
-
-
-void XGINew_SetReg1( ULONG , USHORT , USHORT ) ;
-void XGINew_SetReg2( ULONG , USHORT , USHORT ) ;
-void XGINew_SetReg3( ULONG , USHORT ) ;
-void XGINew_SetReg4( ULONG , ULONG ) ;
-UCHAR XGINew_GetReg1( ULONG , USHORT) ;
-UCHAR XGINew_GetReg2( ULONG ) ;
-ULONG XGINew_GetReg3( ULONG ) ;
-void XGINew_ClearDAC( PUCHAR ) ;
-void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
-void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
-void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
+
+void XGINew_SetReg1(unsigned long,unsigned short,unsigned short);
+void XGINew_SetReg2(unsigned long,unsigned short,unsigned short);
+void XGINew_SetReg3(unsigned long,unsigned short);
+void XGINew_SetReg4(unsigned long,unsigned long);
+unsigned char XGINew_GetReg1(unsigned long, unsigned short);
+unsigned char XGINew_GetReg2(unsigned long);
+unsigned long XGINew_GetReg3(unsigned long);
+void XGINew_ClearDAC(unsigned char *);
+void XGINew_SetRegANDOR(unsigned long Port,unsigned short Index,
+			unsigned short DataAND,unsigned short DataOR);
+void XGINew_SetRegOR(unsigned long Port,unsigned short Index,
+		     unsigned short DataOR);
+void XGINew_SetRegAND(unsigned long Port,unsigned short Index,
+		      unsigned short DataAND);
 
 
 /* --------------------------------------------------------------------- */
@@ -57,15 +28,10 @@ void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
 /* Output : */
 /* Description : SR CRTC GR */
 /* --------------------------------------------------------------------- */
-void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
+void XGINew_SetReg1( unsigned long port , unsigned short index , unsigned short data )
 {
-#ifdef LINUX_XF86
-    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
-    OutPortByte( ( PUCHAR )(ULONG)port + 1 , data ) ;
-#else
-    OutPortByte( port , index ) ;
-    OutPortByte( port + 1 , data ) ;
-#endif
+	outb(index, port);
+	outb(data, port + 1);
 }
 
 
@@ -75,9 +41,9 @@ void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
 /* Output : */
 /* Description : AR( 3C0 ) */
 /* --------------------------------------------------------------------- */
-/*void XGINew_SetReg2( ULONG port , USHORT index , USHORT data )
+/*void XGINew_SetReg2( unsigned long port , unsigned short index , unsigned short data )
 {
-    InPortByte( ( PUCHAR )port + 0x3da - 0x3c0 ) ;
+    InPortByte((P unsigned char )port + 0x3da - 0x3c0) ;
     OutPortByte( XGINew_P3c0 , index ) ;
     OutPortByte( XGINew_P3c0 , data ) ;
     OutPortByte( XGINew_P3c0 , 0x20 ) ;
@@ -90,9 +56,9 @@ void XGINew_SetReg1( ULONG port , USHORT index , USHORT data )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetReg3( ULONG port , USHORT data )
+void XGINew_SetReg3( unsigned long port , unsigned short data )
 {
-    OutPortByte( port , data ) ;
+	outb(data, port);
 }
 
 
@@ -102,9 +68,9 @@ void XGINew_SetReg3( ULONG port , USHORT data )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetReg4( ULONG port , ULONG data )
+void XGINew_SetReg4( unsigned long port , unsigned long data )
 {
-    OutPortLong( port , data ) ;
+	outl(data, port);
 }
 
 
@@ -114,18 +80,12 @@ void XGINew_SetReg4( ULONG port , ULONG data )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGINew_GetReg1( ULONG port , USHORT index )
+unsigned char XGINew_GetReg1(unsigned long port, unsigned short index)
 {
-    UCHAR data ;
-
-#ifdef LINUX_XF86
-    OutPortByte( ( PUCHAR )(ULONG)port , index ) ;
-    data = InPortByte( ( PUCHAR )(ULONG)port + 1 ) ;
-#else
-    OutPortByte( port , index ) ;
-    data = InPortByte( port + 1 ) ;
-#endif
+    unsigned char data ;
 
+    outb(index, port);
+    data = inb(port + 1) ;
     return( data ) ;
 }
 
@@ -136,11 +96,11 @@ UCHAR XGINew_GetReg1( ULONG port , USHORT index )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-UCHAR XGINew_GetReg2( ULONG port )
+unsigned char XGINew_GetReg2(unsigned long port)
 {
-    UCHAR data ;
+    unsigned char data ;
 
-    data = InPortByte( port ) ;
+    data = inb(port) ;
 
     return( data ) ;
 }
@@ -152,11 +112,11 @@ UCHAR XGINew_GetReg2( ULONG port )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-ULONG XGINew_GetReg3( ULONG port )
+unsigned long XGINew_GetReg3( unsigned long port )
 {
-    ULONG data ;
+    unsigned long data ;
 
-    data = InPortLong( port ) ;
+    data = inl(port) ;
 
     return( data ) ;
 }
@@ -169,9 +129,9 @@ ULONG XGINew_GetReg3( ULONG port )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetRegANDOR( ULONG Port , USHORT Index , USHORT DataAND , USHORT DataOR )
+void XGINew_SetRegANDOR( unsigned long Port , unsigned short Index , unsigned short DataAND , unsigned short DataOR )
 {
-    USHORT temp ;
+    unsigned short temp ;
 
     temp = XGINew_GetReg1( Port , Index ) ;		/* XGINew_Part1Port index 02 */
     temp = ( temp & ( DataAND ) ) | DataOR ;
@@ -185,9 +145,9 @@ void XGINew_SetRegANDOR( ULONG Port , USHORT Index , USHORT DataAND , USHORT Dat
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND)
+void XGINew_SetRegAND(unsigned long Port,unsigned short Index,unsigned short DataAND)
 {
-    USHORT temp ;
+    unsigned short temp ;
 
     temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
     temp &= DataAND ;
@@ -201,9 +161,9 @@ void XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND)
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void XGINew_SetRegOR( ULONG Port , USHORT Index , USHORT DataOR )
+void XGINew_SetRegOR( unsigned long Port , unsigned short Index , unsigned short DataOR )
 {
-    USHORT temp ;
+    unsigned short temp ;
 
     temp = XGINew_GetReg1( Port , Index ) ;	/* XGINew_Part1Port index 02 */
     temp |= DataOR ;
@@ -219,29 +179,14 @@ void XGINew_SetRegOR( ULONG Port , USHORT Index , USHORT DataOR )
 /* --------------------------------------------------------------------- */
 void NewDelaySeconds( int seconds )
 {
-#ifdef WIN2000
-    int j ;
-#endif
     int i ;
 
 
     for( i = 0 ; i < seconds ; i++ )
     {
-#ifdef TC
-        delay( 1000 ) ;
-#endif
-
-#ifdef WIN2000
 
-        for ( j = 0 ; j < 20000 ; j++ )
-            VideoPortStallExecution( 50 ) ;
-#endif
 
-#ifdef WINCE_HEADER
-#endif
 
-#ifdef LINUX_KERNEL
-#endif
     }
 }
 
@@ -252,7 +197,7 @@ void NewDelaySeconds( int seconds )
 /* Output : */
 /* Description : */
 /* --------------------------------------------------------------------- */
-void Newdebugcode( UCHAR code )
+void Newdebugcode(unsigned char code)
 {
 //    OutPortByte ( 0x80 , code ) ;
     /* OutPortByte ( 0x300 , code ) ; */
diff --git a/drivers/staging/xgifb/vb_util.h b/drivers/staging/xgifb/vb_util.h
index 91779d8cfdc..156f6445c88 100644
--- a/drivers/staging/xgifb/vb_util.h
+++ b/drivers/staging/xgifb/vb_util.h
@@ -1,15 +1,15 @@
 #ifndef _VBUTIL_
 #define _VBUTIL_
 extern   void     NewDelaySeconds( int );
-extern   void     Newdebugcode( UCHAR );
-extern   void     XGINew_SetReg1(ULONG, USHORT, USHORT);
-extern   void     XGINew_SetReg3(ULONG, USHORT);
-extern   UCHAR    XGINew_GetReg1(ULONG, USHORT);
-extern   UCHAR    XGINew_GetReg2(ULONG);
-extern   void     XGINew_SetReg4(ULONG, ULONG);
-extern   ULONG    XGINew_GetReg3(ULONG);
-extern   void     XGINew_SetRegOR(ULONG Port,USHORT Index,USHORT DataOR);
-extern   void     XGINew_SetRegAND(ULONG Port,USHORT Index,USHORT DataAND);
-extern   void     XGINew_SetRegANDOR(ULONG Port,USHORT Index,USHORT DataAND,USHORT DataOR);
+extern   void     Newdebugcode(unsigned char);
+extern   void     XGINew_SetReg1(unsigned long, unsigned short, unsigned short);
+extern   void     XGINew_SetReg3(unsigned long, unsigned short);
+extern    unsigned char     XGINew_GetReg1(unsigned long, unsigned short);
+extern    unsigned char     XGINew_GetReg2(unsigned long);
+extern   void     XGINew_SetReg4(unsigned long, unsigned long);
+extern   unsigned long    XGINew_GetReg3(unsigned long);
+extern   void     XGINew_SetRegOR(unsigned long Port,unsigned short Index,unsigned short DataOR);
+extern   void     XGINew_SetRegAND(unsigned long Port,unsigned short Index,unsigned short DataAND);
+extern   void     XGINew_SetRegANDOR(unsigned long Port,unsigned short Index,unsigned short DataAND,unsigned short DataOR);
 #endif
 
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index 295ea860ae4..df839eeb5ef 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -2,136 +2,14 @@
 #ifndef _VGATYPES_
 #define _VGATYPES_
 
-#include "osdef.h"
-
-#ifdef LINUX_XF86
-#include "xf86Version.h"
-#include "xf86Pci.h"
-#endif
-
-#ifdef LINUX_KERNEL  /* We don't want the X driver to depend on kernel source */
 #include <linux/ioctl.h>
-#endif
-
-#ifndef FALSE
-#define FALSE   0
-#endif
-
-#ifndef TRUE
-#define TRUE    1
-#endif
-
-#ifndef NULL
-#define NULL    0
-#endif
-
-#ifndef CHAR
-typedef char CHAR;
-#endif
-
-#ifndef SHORT
-typedef short SHORT;
-#endif
-
-#ifndef LONG
-typedef long  LONG;
-#endif
-
-#ifndef UCHAR
-typedef unsigned char UCHAR;
-#endif
-
-#ifndef USHORT
-typedef unsigned short USHORT;
-#endif
-
-#ifndef ULONG
-typedef unsigned long ULONG;
-#endif
-
-#ifndef PUCHAR
-typedef UCHAR *PUCHAR;
-#endif
-
-#ifndef PUSHORT
-typedef USHORT *PUSHORT;
-#endif
-
-#ifndef PLONGU
-typedef ULONG *PULONG;
-#endif
-
-#ifndef VOID
-typedef void VOID;
-#endif
-
-#ifndef PVOID
-typedef void *PVOID;
-#endif
-
-#ifndef BOOLEAN
-typedef UCHAR BOOLEAN;
-#endif
-/*
-#ifndef bool
-typedef UCHAR bool;
-#endif
-*/
-#ifdef LINUX_KERNEL
-typedef unsigned long XGIIOADDRESS;
-#endif
-
-#ifdef LINUX_XF86
-#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
-typedef unsigned char IOADDRESS;
-typedef unsigned char XGIIOADDRESS;
-#else
-typedef IOADDRESS XGIIOADDRESS;
-#endif
-#endif
 
 #ifndef VBIOS_VER_MAX_LENGTH
-#define VBIOS_VER_MAX_LENGTH    4
-#endif
-
-#ifndef WIN2000
-
-#ifndef LINUX_KERNEL   /* For the linux kernel, this is defined in xgifb.h */
-#ifndef XGI_CHIP_TYPE
-typedef enum _XGI_CHIP_TYPE {
-    XGI_VGALegacy = 0,
-#ifdef LINUX_XF86
-    XGI_530,
-    XGI_OLD,
-#endif
-    XGI_300,
-    XGI_630,
-    XGI_640,
-    XGI_315H,
-    XGI_315,
-    XGI_315PRO,
-    XGI_550,
-    XGI_650,
-    XGI_650M,
-    XGI_740,
-    XGI_330,
-    XGI_661,
-    XGI_660,
-    XGI_760,
-    XG40 = 32,
-    XG41,
-    XG42,
-    XG45,
-    XG20 = 48,
-    XG21,
-    XG27,
-    MAX_XGI_CHIP
-} XGI_CHIP_TYPE;
-#endif
+#define VBIOS_VER_MAX_LENGTH    5
 #endif
 
 #ifndef XGI_VB_CHIP_TYPE
-typedef enum _XGI_VB_CHIP_TYPE {
+enum XGI_VB_CHIP_TYPE {
     VB_CHIP_Legacy = 0,
     VB_CHIP_301,
     VB_CHIP_301B,
@@ -143,11 +21,11 @@ typedef enum _XGI_VB_CHIP_TYPE {
     VB_CHIP_302ELV,
     VB_CHIP_UNKNOWN, /* other video bridge or no video bridge */
     MAX_VB_CHIP
-} XGI_VB_CHIP_TYPE;
+};
 #endif
 
 #ifndef XGI_LCD_TYPE
-typedef enum _XGI_LCD_TYPE {
+enum XGI_LCD_TYPE {
     LCD_INVALID = 0,
     LCD_320x480,       /* FSTN, DSTN */
     LCD_640x480,
@@ -171,155 +49,90 @@ typedef enum _XGI_LCD_TYPE {
     LCD_2048x1536,
     LCD_CUSTOM,
     LCD_UNKNOWN
-} XGI_LCD_TYPE;
+};
 #endif
 
-#endif   /* not WIN2000 */
-
-#ifndef PXGI_DSReg
-typedef struct _XGI_DSReg
+struct XGI_DSReg
 {
-  UCHAR  jIdx;
-  UCHAR  jVal;
-} XGI_DSReg, *PXGI_DSReg;
-#endif
-
-#ifndef XGI_HW_DEVICE_INFO
-
-typedef struct _XGI_HW_DEVICE_INFO  XGI_HW_DEVICE_INFO, *PXGI_HW_DEVICE_INFO;
-
-typedef BOOLEAN (*PXGI_QUERYSPACE)   (PXGI_HW_DEVICE_INFO, ULONG, ULONG, ULONG *);
+  unsigned char  jIdx;
+  unsigned char  jVal;
+};
 
-struct _XGI_HW_DEVICE_INFO
+struct xgi_hw_device_info
 {
-    ULONG  ulExternalChip;       /* NO VB or other video bridge*/
+    unsigned long  ulExternalChip;       /* NO VB or other video bridge*/
                                  /* if ujVBChipID = VB_CHIP_UNKNOWN, */
-#ifdef LINUX_XF86
-    PCITAG PciTag;		 /* PCI Tag */
-#endif
 
-    PUCHAR  pjVirtualRomBase;    /* ROM image */
+    unsigned char *pjVirtualRomBase;    /* ROM image */
 
-    BOOLEAN UseROM;		 /* Use the ROM image if provided */
+    unsigned char UseROM;		 /* Use the ROM image if provided */
 
-    PVOID   pDevice;
+    void *pDevice;
 
-    PUCHAR  pjVideoMemoryAddress;/* base virtual memory address */
+    unsigned char *pjVideoMemoryAddress;/* base virtual memory address */
                                  /* of Linear VGA memory */
 
-    ULONG  ulVideoMemorySize;    /* size, in bytes, of the memory on the board */
+    unsigned long  ulVideoMemorySize;    /* size, in bytes, of the memory on the board */
 
-    PUCHAR pjIOAddress;          /* base I/O address of VGA ports (0x3B0) */
+    unsigned char *pjIOAddress;          /* base I/O address of VGA ports (0x3B0) */
 
-    PUCHAR pjCustomizedROMImage;
+    unsigned char *pjCustomizedROMImage;
 
-    PUCHAR pj2ndVideoMemoryAddress;
-    ULONG  ul2ndVideoMemorySize;
+    unsigned char *pj2ndVideoMemoryAddress;
+    unsigned long  ul2ndVideoMemorySize;
 
-    PUCHAR pj2ndIOAddress;
-/*#ifndef WIN2000
-    XGIIOADDRESS pjIOAddress;   //  base I/O address of VGA ports (0x3B0)
-#endif */
-    UCHAR  jChipType;            /* Used to Identify Graphics Chip */
+    unsigned char *pj2ndIOAddress;
+    unsigned char  jChipType;            /* Used to Identify Graphics Chip */
                                  /* defined in the data structure type  */
                                  /* "XGI_CHIP_TYPE" */
 
-    UCHAR  jChipRevision;        /* Used to Identify Graphics Chip Revision */
+    unsigned char  jChipRevision;        /* Used to Identify Graphics Chip Revision */
 
-    UCHAR  ujVBChipID;           /* the ID of video bridge */
+    unsigned char  ujVBChipID;           /* the ID of video bridge */
                                  /* defined in the data structure type */
                                  /* "XGI_VB_CHIP_TYPE" */
 
-    BOOLEAN    bNewScratch;
+    unsigned char    bNewScratch;
 
-    ULONG  ulCRT2LCDType;        /* defined in the data structure type */
+    unsigned long  ulCRT2LCDType;        /* defined in the data structure type */
 
-    ULONG usExternalChip;       /* NO VB or other video bridge (other than  */
+    unsigned long usExternalChip;       /* NO VB or other video bridge (other than  */
                                  /*  video bridge) */
 
-    BOOLEAN bIntegratedMMEnabled;/* supporting integration MM enable */
+    unsigned char bIntegratedMMEnabled;/* supporting integration MM enable */
 
-    BOOLEAN bSkipDramSizing;     /* True: Skip video memory sizing. */
+    unsigned char bSkipDramSizing;     /* True: Skip video memory sizing. */
 
-    BOOLEAN bSkipSense;
+    unsigned char bSkipSense;
 
-    BOOLEAN bIsPowerSaving;     /* True: XGIInit() is invoked by power management,
+    unsigned char bIsPowerSaving;     /* True: XGIInit() is invoked by power management,
                                    otherwise by 2nd adapter's initialzation */
 
-    PXGI_DSReg  pSR;             /* restore SR registers in initial function. */
+    struct XGI_DSReg  *pSR;             /* restore SR registers in initial function. */
                                  /* end data :(idx, val) =  (FF, FF). */
                                  /* Note : restore SR registers if  */
-                                 /* bSkipDramSizing = TRUE */
+                                 /* bSkipDramSizing = 1 */
 
-    PXGI_DSReg  pCR;             /* restore CR registers in initial function. */
+    struct XGI_DSReg  *pCR;             /* restore CR registers in initial function. */
                                  /* end data :(idx, val) =  (FF, FF) */
                                  /* Note : restore cR registers if  */
-                                 /* bSkipDramSizing = TRUE */
-/*
-#endif
-*/
+                                 /* bSkipDramSizing = 1 */
 
-    PXGI_QUERYSPACE  pQueryVGAConfigSpace;
+	unsigned char(*pQueryVGAConfigSpace)(struct xgi_hw_device_info *,
+					    unsigned long, unsigned long,
+					    unsigned long *);
 
-    PXGI_QUERYSPACE  pQueryNorthBridgeSpace;
+	unsigned char(*pQueryNorthBridgeSpace)(struct xgi_hw_device_info *,
+					      unsigned long, unsigned long,
+					      unsigned long *);
 
-    UCHAR  szVBIOSVer[VBIOS_VER_MAX_LENGTH];
+    unsigned char szVBIOSVer[VBIOS_VER_MAX_LENGTH];
 
 };
-#endif
 
 /* Addtional IOCTL for communication xgifb <> X driver        */
 /* If changing this, xgifb.h must also be changed (for xgifb) */
 
-#ifdef LINUX_XF86  /* We don't want the X driver to depend on the kernel source */
-
-/* ioctl for identifying and giving some info (esp. memory heap start) */
-#define XGIFB_GET_INFO    0x80046ef8  /* Wow, what a terrible hack... */
-
-/* Structure argument for XGIFB_GET_INFO ioctl  */
-typedef struct _XGIFB_INFO xgifb_info, *pxgifb_info;
-
-struct _XGIFB_INFO {
-	CARD32 	xgifb_id;         	/* for identifying xgifb */
-#ifndef XGIFB_ID
-#define XGIFB_ID	  0x53495346    /* Identify myself with 'XGIF' */
-#endif
- 	CARD32 	chip_id;		/* PCI ID of detected chip */
-	CARD32	memory;			/* video memory in KB which xgifb manages */
-	CARD32	heapstart;             	/* heap start (= xgifb "mem" argument) in KB */
-	CARD8 	fbvidmode;		/* current xgifb mode */
-
-	CARD8 	xgifb_version;
-	CARD8	xgifb_revision;
-	CARD8 	xgifb_patchlevel;
-
-	CARD8 	xgifb_caps;		/* xgifb's capabilities */
-
-	CARD32 	xgifb_tqlen;		/* turbo queue length (in KB) */
-
-	CARD32 	xgifb_pcibus;      	/* The card's PCI ID */
-	CARD32 	xgifb_pcislot;
-	CARD32 	xgifb_pcifunc;
-
-	CARD8 	xgifb_lcdpdc;
-
-	CARD8	xgifb_lcda;
-
-	CARD32	xgifb_vbflags;
-	CARD32	xgifb_currentvbflags;
-
-	CARD32 	xgifb_scalelcd;
-	CARD32 	xgifb_specialtiming;
-
-	CARD8 	xgifb_haveemi;
-	CARD8 	xgifb_emi30,xgifb_emi31,xgifb_emi32,xgifb_emi33;
-	CARD8 	xgifb_haveemilcd;
-
-	CARD8 	xgifb_lcdpdca;
-
-	CARD8 reserved[212]; 		/* for future use */
-};
-#endif
 
 #endif
 
diff --git a/drivers/staging/zram/Kconfig b/drivers/staging/zram/Kconfig
new file mode 100644
index 00000000000..4654ae2eb42
--- /dev/null
+++ b/drivers/staging/zram/Kconfig
@@ -0,0 +1,29 @@
+config ZRAM
+	tristate "Compressed RAM block device support"
+	depends on BLOCK
+	select LZO_COMPRESS
+	select LZO_DECOMPRESS
+	default n
+	help
+	  Creates virtual block devices called /dev/zramX (X = 0, 1, ...).
+	  Pages written to these disks are compressed and stored in memory
+	  itself. These disks allow very fast I/O and compression provides
+	  good amounts of memory savings.
+
+	  It has several use cases, for example: /tmp storage, use as swap
+	  disks and maybe many more.
+
+	  See zram.txt for more information.
+	  Project home: http://compcache.googlecode.com/
+
+config ZRAM_STATS
+	bool "Enable statistics for compressed RAM disks"
+	depends on ZRAM
+	default y
+	help
+	  Enable statistics collection for compressed RAM devices. Statistics
+	  are exported through ioctl interface, so you have to use zramconfig
+	  program to get them. This adds only a minimal overhead.
+
+	  If unsure, say Y.
+
diff --git a/drivers/staging/zram/Makefile b/drivers/staging/zram/Makefile
new file mode 100644
index 00000000000..b2c087aa105
--- /dev/null
+++ b/drivers/staging/zram/Makefile
@@ -0,0 +1,3 @@
+zram-objs	:=	zram_drv.o xvmalloc.o
+
+obj-$(CONFIG_ZRAM)	+=	zram.o
diff --git a/drivers/staging/ramzswap/xvmalloc.c b/drivers/staging/zram/xvmalloc.c
index 3fdbb8ada82..3fdbb8ada82 100644
--- a/drivers/staging/ramzswap/xvmalloc.c
+++ b/drivers/staging/zram/xvmalloc.c
diff --git a/drivers/staging/ramzswap/xvmalloc.h b/drivers/staging/zram/xvmalloc.h
index 5b1a81aa5fa..5b1a81aa5fa 100644
--- a/drivers/staging/ramzswap/xvmalloc.h
+++ b/drivers/staging/zram/xvmalloc.h
diff --git a/drivers/staging/ramzswap/xvmalloc_int.h b/drivers/staging/zram/xvmalloc_int.h
index e23ed5c8b8e..e23ed5c8b8e 100644
--- a/drivers/staging/ramzswap/xvmalloc_int.h
+++ b/drivers/staging/zram/xvmalloc_int.h
diff --git a/drivers/staging/zram/zram.txt b/drivers/staging/zram/zram.txt
new file mode 100644
index 00000000000..520edc1bea7
--- /dev/null
+++ b/drivers/staging/zram/zram.txt
@@ -0,0 +1,62 @@
+zram: Compressed RAM based block devices
+----------------------------------------
+
+Project home: http://compcache.googlecode.com/
+
+* Introduction
+
+The zram module creates RAM based block devices: /dev/ramX (X = 0, 1, ...).
+Pages written to these disks are compressed and stored in memory itself.
+These disks allow very fast I/O and compression provides good amounts of
+memory savings.
+
+See project home for use cases, performance numbers and a lot more.
+
+Individual zram devices are configured and initialized using zramconfig
+userspace utility as shown in examples below. See zramconfig man page for
+more details.
+
+* Usage
+
+Following shows a typical sequence of steps for using zram.
+
+1) Load Modules:
+	modprobe zram num_devices=4
+	This creates 4 (uninitialized) devices: /dev/zram{0,1,2,3}
+	(num_devices parameter is optional. Default: 1)
+
+2) Initialize:
+	Use zramconfig utility to configure and initialize individual
+	zram devices. For example:
+	zramconfig /dev/zram0 --init # uses default value of disksize_kb
+	zramconfig /dev/zram1 --disksize_kb=102400 # 100MB /dev/zram1
+
+	*See zramconfig man page for more details and examples*
+
+3) Activate:
+	mkswap /dev/zram0
+	swapon /dev/zram0
+
+	mkfs.ext4 /dev/zram1
+	mount /dev/zram1 /tmp
+
+4) Stats:
+	zramconfig /dev/zram0 --stats
+	zramconfig /dev/zram1 --stats
+
+5) Deactivate:
+	swapoff /dev/zram0
+	umount /dev/zram1
+
+6) Reset:
+	zramconfig /dev/zram0 --reset
+	zramconfig /dev/zram1 --reset
+	(This frees memory allocated for the given device).
+
+
+Please report any problems at:
+ - Mailing list: linux-mm-cc at laptop dot org
+ - Issue tracker: http://code.google.com/p/compcache/issues/list
+
+Nitin Gupta
+ngupta@vflare.org
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
new file mode 100644
index 00000000000..77d4d715a78
--- /dev/null
+++ b/drivers/staging/zram/zram_drv.c
@@ -0,0 +1,805 @@
+/*
+ * Compressed RAM block device
+ *
+ * Copyright (C) 2008, 2009, 2010  Nitin Gupta
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ * Project home: http://compcache.googlecode.com
+ */
+
+#define KMSG_COMPONENT "zram"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/bio.h>
+#include <linux/bitops.h>
+#include <linux/blkdev.h>
+#include <linux/buffer_head.h>
+#include <linux/device.h>
+#include <linux/genhd.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/lzo.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+
+#include "zram_drv.h"
+
+/* Globals */
+static int zram_major;
+static struct zram *devices;
+
+/* Module params (documentation at end) */
+static unsigned int num_devices;
+
+static int zram_test_flag(struct zram *zram, u32 index,
+			enum zram_pageflags flag)
+{
+	return zram->table[index].flags & BIT(flag);
+}
+
+static void zram_set_flag(struct zram *zram, u32 index,
+			enum zram_pageflags flag)
+{
+	zram->table[index].flags |= BIT(flag);
+}
+
+static void zram_clear_flag(struct zram *zram, u32 index,
+			enum zram_pageflags flag)
+{
+	zram->table[index].flags &= ~BIT(flag);
+}
+
+static int page_zero_filled(void *ptr)
+{
+	unsigned int pos;
+	unsigned long *page;
+
+	page = (unsigned long *)ptr;
+
+	for (pos = 0; pos != PAGE_SIZE / sizeof(*page); pos++) {
+		if (page[pos])
+			return 0;
+	}
+
+	return 1;
+}
+
+static void zram_set_disksize(struct zram *zram, size_t totalram_bytes)
+{
+	if (!zram->disksize) {
+		pr_info(
+		"disk size not provided. You can use disksize_kb module "
+		"param to specify size.\nUsing default: (%u%% of RAM).\n",
+		default_disksize_perc_ram
+		);
+		zram->disksize = default_disksize_perc_ram *
+					(totalram_bytes / 100);
+	}
+
+	if (zram->disksize > 2 * (totalram_bytes)) {
+		pr_info(
+		"There is little point creating a zram of greater than "
+		"twice the size of memory since we expect a 2:1 compression "
+		"ratio. Note that zram uses about 0.1%% of the size of "
+		"the disk when not in use so a huge zram is "
+		"wasteful.\n"
+		"\tMemory Size: %zu kB\n"
+		"\tSize you selected: %zu kB\n"
+		"Continuing anyway ...\n",
+		totalram_bytes >> 10, zram->disksize
+		);
+	}
+
+	zram->disksize &= PAGE_MASK;
+}
+
+static void zram_ioctl_get_stats(struct zram *zram,
+			struct zram_ioctl_stats *s)
+{
+	s->disksize = zram->disksize;
+
+#if defined(CONFIG_ZRAM_STATS)
+	{
+	struct zram_stats *rs = &zram->stats;
+	size_t succ_writes, mem_used;
+	unsigned int good_compress_perc = 0, no_compress_perc = 0;
+
+	mem_used = xv_get_total_size_bytes(zram->mem_pool)
+			+ (rs->pages_expand << PAGE_SHIFT);
+	succ_writes = zram_stat64_read(zram, &rs->num_writes) -
+			zram_stat64_read(zram, &rs->failed_writes);
+
+	if (succ_writes && rs->pages_stored) {
+		good_compress_perc = rs->good_compress * 100
+					/ rs->pages_stored;
+		no_compress_perc = rs->pages_expand * 100
+					/ rs->pages_stored;
+	}
+
+	s->num_reads = zram_stat64_read(zram, &rs->num_reads);
+	s->num_writes = zram_stat64_read(zram, &rs->num_writes);
+	s->failed_reads = zram_stat64_read(zram, &rs->failed_reads);
+	s->failed_writes = zram_stat64_read(zram, &rs->failed_writes);
+	s->invalid_io = zram_stat64_read(zram, &rs->invalid_io);
+	s->notify_free = zram_stat64_read(zram, &rs->notify_free);
+	s->pages_zero = rs->pages_zero;
+
+	s->good_compress_pct = good_compress_perc;
+	s->pages_expand_pct = no_compress_perc;
+
+	s->pages_stored = rs->pages_stored;
+	s->pages_used = mem_used >> PAGE_SHIFT;
+	s->orig_data_size = rs->pages_stored << PAGE_SHIFT;
+	s->compr_data_size = rs->compr_size;
+	s->mem_used_total = mem_used;
+	}
+#endif /* CONFIG_ZRAM_STATS */
+}
+
+static void zram_free_page(struct zram *zram, size_t index)
+{
+	u32 clen;
+	void *obj;
+
+	struct page *page = zram->table[index].page;
+	u32 offset = zram->table[index].offset;
+
+	if (unlikely(!page)) {
+		/*
+		 * No memory is allocated for zero filled pages.
+		 * Simply clear zero page flag.
+		 */
+		if (zram_test_flag(zram, index, ZRAM_ZERO)) {
+			zram_clear_flag(zram, index, ZRAM_ZERO);
+			zram_stat_dec(&zram->stats.pages_zero);
+		}
+		return;
+	}
+
+	if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED))) {
+		clen = PAGE_SIZE;
+		__free_page(page);
+		zram_clear_flag(zram, index, ZRAM_UNCOMPRESSED);
+		zram_stat_dec(&zram->stats.pages_expand);
+		goto out;
+	}
+
+	obj = kmap_atomic(page, KM_USER0) + offset;
+	clen = xv_get_object_size(obj) - sizeof(struct zobj_header);
+	kunmap_atomic(obj, KM_USER0);
+
+	xv_free(zram->mem_pool, page, offset);
+	if (clen <= PAGE_SIZE / 2)
+		zram_stat_dec(&zram->stats.good_compress);
+
+out:
+	zram->stats.compr_size -= clen;
+	zram_stat_dec(&zram->stats.pages_stored);
+
+	zram->table[index].page = NULL;
+	zram->table[index].offset = 0;
+}
+
+static void handle_zero_page(struct page *page)
+{
+	void *user_mem;
+
+	user_mem = kmap_atomic(page, KM_USER0);
+	memset(user_mem, 0, PAGE_SIZE);
+	kunmap_atomic(user_mem, KM_USER0);
+
+	flush_dcache_page(page);
+}
+
+static void handle_uncompressed_page(struct zram *zram,
+				struct page *page, u32 index)
+{
+	unsigned char *user_mem, *cmem;
+
+	user_mem = kmap_atomic(page, KM_USER0);
+	cmem = kmap_atomic(zram->table[index].page, KM_USER1) +
+			zram->table[index].offset;
+
+	memcpy(user_mem, cmem, PAGE_SIZE);
+	kunmap_atomic(user_mem, KM_USER0);
+	kunmap_atomic(cmem, KM_USER1);
+
+	flush_dcache_page(page);
+}
+
+static int zram_read(struct zram *zram, struct bio *bio)
+{
+
+	int i;
+	u32 index;
+	struct bio_vec *bvec;
+
+	zram_stat64_inc(zram, &zram->stats.num_reads);
+
+	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
+	bio_for_each_segment(bvec, bio, i) {
+		int ret;
+		size_t clen;
+		struct page *page;
+		struct zobj_header *zheader;
+		unsigned char *user_mem, *cmem;
+
+		page = bvec->bv_page;
+
+		if (zram_test_flag(zram, index, ZRAM_ZERO)) {
+			handle_zero_page(page);
+			continue;
+		}
+
+		/* Requested page is not present in compressed area */
+		if (unlikely(!zram->table[index].page)) {
+			pr_debug("Read before write: sector=%lu, size=%u",
+				(ulong)(bio->bi_sector), bio->bi_size);
+			/* Do nothing */
+			continue;
+		}
+
+		/* Page is stored uncompressed since it's incompressible */
+		if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED))) {
+			handle_uncompressed_page(zram, page, index);
+			continue;
+		}
+
+		user_mem = kmap_atomic(page, KM_USER0);
+		clen = PAGE_SIZE;
+
+		cmem = kmap_atomic(zram->table[index].page, KM_USER1) +
+				zram->table[index].offset;
+
+		ret = lzo1x_decompress_safe(
+			cmem + sizeof(*zheader),
+			xv_get_object_size(cmem) - sizeof(*zheader),
+			user_mem, &clen);
+
+		kunmap_atomic(user_mem, KM_USER0);
+		kunmap_atomic(cmem, KM_USER1);
+
+		/* Should NEVER happen. Return bio error if it does. */
+		if (unlikely(ret != LZO_E_OK)) {
+			pr_err("Decompression failed! err=%d, page=%u\n",
+				ret, index);
+			zram_stat64_inc(zram, &zram->stats.failed_reads);
+			goto out;
+		}
+
+		flush_dcache_page(page);
+		index++;
+	}
+
+	set_bit(BIO_UPTODATE, &bio->bi_flags);
+	bio_endio(bio, 0);
+	return 0;
+
+out:
+	bio_io_error(bio);
+	return 0;
+}
+
+static int zram_write(struct zram *zram, struct bio *bio)
+{
+	int i;
+	u32 index;
+	struct bio_vec *bvec;
+
+	zram_stat64_inc(zram, &zram->stats.num_writes);
+
+	index = bio->bi_sector >> SECTORS_PER_PAGE_SHIFT;
+
+	bio_for_each_segment(bvec, bio, i) {
+		int ret;
+		u32 offset;
+		size_t clen;
+		struct zobj_header *zheader;
+		struct page *page, *page_store;
+		unsigned char *user_mem, *cmem, *src;
+
+		page = bvec->bv_page;
+		src = zram->compress_buffer;
+
+		/*
+		 * System overwrites unused sectors. Free memory associated
+		 * with this sector now.
+		 */
+		if (zram->table[index].page ||
+				zram_test_flag(zram, index, ZRAM_ZERO))
+			zram_free_page(zram, index);
+
+		mutex_lock(&zram->lock);
+
+		user_mem = kmap_atomic(page, KM_USER0);
+		if (page_zero_filled(user_mem)) {
+			kunmap_atomic(user_mem, KM_USER0);
+			mutex_unlock(&zram->lock);
+			zram_stat_inc(&zram->stats.pages_zero);
+			zram_set_flag(zram, index, ZRAM_ZERO);
+			continue;
+		}
+
+		ret = lzo1x_1_compress(user_mem, PAGE_SIZE, src, &clen,
+					zram->compress_workmem);
+
+		kunmap_atomic(user_mem, KM_USER0);
+
+		if (unlikely(ret != LZO_E_OK)) {
+			mutex_unlock(&zram->lock);
+			pr_err("Compression failed! err=%d\n", ret);
+			zram_stat64_inc(zram, &zram->stats.failed_writes);
+			goto out;
+		}
+
+		/*
+		 * Page is incompressible. Store it as-is (uncompressed)
+		 * since we do not want to return too many disk write
+		 * errors which has side effect of hanging the system.
+		 */
+		if (unlikely(clen > max_zpage_size)) {
+			clen = PAGE_SIZE;
+			page_store = alloc_page(GFP_NOIO | __GFP_HIGHMEM);
+			if (unlikely(!page_store)) {
+				mutex_unlock(&zram->lock);
+				pr_info("Error allocating memory for "
+					"incompressible page: %u\n", index);
+				zram_stat64_inc(zram,
+					&zram->stats.failed_writes);
+				goto out;
+			}
+
+			offset = 0;
+			zram_set_flag(zram, index, ZRAM_UNCOMPRESSED);
+			zram_stat_inc(&zram->stats.pages_expand);
+			zram->table[index].page = page_store;
+			src = kmap_atomic(page, KM_USER0);
+			goto memstore;
+		}
+
+		if (xv_malloc(zram->mem_pool, clen + sizeof(*zheader),
+				&zram->table[index].page, &offset,
+				GFP_NOIO | __GFP_HIGHMEM)) {
+			mutex_unlock(&zram->lock);
+			pr_info("Error allocating memory for compressed "
+				"page: %u, size=%zu\n", index, clen);
+			zram_stat64_inc(zram, &zram->stats.failed_writes);
+			goto out;
+		}
+
+memstore:
+		zram->table[index].offset = offset;
+
+		cmem = kmap_atomic(zram->table[index].page, KM_USER1) +
+				zram->table[index].offset;
+
+#if 0
+		/* Back-reference needed for memory defragmentation */
+		if (!zram_test_flag(zram, index, ZRAM_UNCOMPRESSED)) {
+			zheader = (struct zobj_header *)cmem;
+			zheader->table_idx = index;
+			cmem += sizeof(*zheader);
+		}
+#endif
+
+		memcpy(cmem, src, clen);
+
+		kunmap_atomic(cmem, KM_USER1);
+		if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED)))
+			kunmap_atomic(src, KM_USER0);
+
+		/* Update stats */
+		zram->stats.compr_size += clen;
+		zram_stat_inc(&zram->stats.pages_stored);
+		if (clen <= PAGE_SIZE / 2)
+			zram_stat_inc(&zram->stats.good_compress);
+
+		mutex_unlock(&zram->lock);
+		index++;
+	}
+
+	set_bit(BIO_UPTODATE, &bio->bi_flags);
+	bio_endio(bio, 0);
+	return 0;
+
+out:
+	bio_io_error(bio);
+	return 0;
+}
+
+/*
+ * Check if request is within bounds and page aligned.
+ */
+static inline int valid_io_request(struct zram *zram, struct bio *bio)
+{
+	if (unlikely(
+		(bio->bi_sector >= (zram->disksize >> SECTOR_SHIFT)) ||
+		(bio->bi_sector & (SECTORS_PER_PAGE - 1)) ||
+		(bio->bi_size & (PAGE_SIZE - 1)))) {
+
+		return 0;
+	}
+
+	/* I/O request is valid */
+	return 1;
+}
+
+/*
+ * Handler function for all zram I/O requests.
+ */
+static int zram_make_request(struct request_queue *queue, struct bio *bio)
+{
+	int ret = 0;
+	struct zram *zram = queue->queuedata;
+
+	if (unlikely(!zram->init_done)) {
+		bio_io_error(bio);
+		return 0;
+	}
+
+	if (!valid_io_request(zram, bio)) {
+		zram_stat64_inc(zram, &zram->stats.invalid_io);
+		bio_io_error(bio);
+		return 0;
+	}
+
+	switch (bio_data_dir(bio)) {
+	case READ:
+		ret = zram_read(zram, bio);
+		break;
+
+	case WRITE:
+		ret = zram_write(zram, bio);
+		break;
+	}
+
+	return ret;
+}
+
+static void reset_device(struct zram *zram)
+{
+	size_t index;
+
+	/* Do not accept any new I/O request */
+	zram->init_done = 0;
+
+	/* Free various per-device buffers */
+	kfree(zram->compress_workmem);
+	free_pages((unsigned long)zram->compress_buffer, 1);
+
+	zram->compress_workmem = NULL;
+	zram->compress_buffer = NULL;
+
+	/* Free all pages that are still in this zram device */
+	for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
+		struct page *page;
+		u16 offset;
+
+		page = zram->table[index].page;
+		offset = zram->table[index].offset;
+
+		if (!page)
+			continue;
+
+		if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED)))
+			__free_page(page);
+		else
+			xv_free(zram->mem_pool, page, offset);
+	}
+
+	vfree(zram->table);
+	zram->table = NULL;
+
+	xv_destroy_pool(zram->mem_pool);
+	zram->mem_pool = NULL;
+
+	/* Reset stats */
+	memset(&zram->stats, 0, sizeof(zram->stats));
+
+	zram->disksize = 0;
+}
+
+static int zram_ioctl_init_device(struct zram *zram)
+{
+	int ret;
+	size_t num_pages;
+
+	if (zram->init_done) {
+		pr_info("Device already initialized!\n");
+		return -EBUSY;
+	}
+
+	zram_set_disksize(zram, totalram_pages << PAGE_SHIFT);
+
+	zram->compress_workmem = kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
+	if (!zram->compress_workmem) {
+		pr_err("Error allocating compressor working memory!\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	zram->compress_buffer = (void *)__get_free_pages(__GFP_ZERO, 1);
+	if (!zram->compress_buffer) {
+		pr_err("Error allocating compressor buffer space\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	num_pages = zram->disksize >> PAGE_SHIFT;
+	zram->table = vmalloc(num_pages * sizeof(*zram->table));
+	if (!zram->table) {
+		pr_err("Error allocating zram address table\n");
+		/* To prevent accessing table entries during cleanup */
+		zram->disksize = 0;
+		ret = -ENOMEM;
+		goto fail;
+	}
+	memset(zram->table, 0, num_pages * sizeof(*zram->table));
+
+	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
+
+	/* zram devices sort of resembles non-rotational disks */
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zram->disk->queue);
+
+	zram->mem_pool = xv_create_pool();
+	if (!zram->mem_pool) {
+		pr_err("Error creating memory pool\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	zram->init_done = 1;
+
+	pr_debug("Initialization done!\n");
+	return 0;
+
+fail:
+	reset_device(zram);
+
+	pr_err("Initialization failed: err=%d\n", ret);
+	return ret;
+}
+
+static int zram_ioctl_reset_device(struct zram *zram)
+{
+	if (zram->init_done)
+		reset_device(zram);
+
+	return 0;
+}
+
+static int zram_ioctl(struct block_device *bdev, fmode_t mode,
+			unsigned int cmd, unsigned long arg)
+{
+	int ret = 0;
+	size_t disksize_kb;
+
+	struct zram *zram = bdev->bd_disk->private_data;
+
+	switch (cmd) {
+	case ZRAMIO_SET_DISKSIZE_KB:
+		if (zram->init_done) {
+			ret = -EBUSY;
+			goto out;
+		}
+		if (copy_from_user(&disksize_kb, (void *)arg,
+						_IOC_SIZE(cmd))) {
+			ret = -EFAULT;
+			goto out;
+		}
+		zram->disksize = disksize_kb << 10;
+		pr_info("Disk size set to %zu kB\n", disksize_kb);
+		break;
+
+	case ZRAMIO_GET_STATS:
+	{
+		struct zram_ioctl_stats *stats;
+		if (!zram->init_done) {
+			ret = -ENOTTY;
+			goto out;
+		}
+		stats = kzalloc(sizeof(*stats), GFP_KERNEL);
+		if (!stats) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		zram_ioctl_get_stats(zram, stats);
+		if (copy_to_user((void *)arg, stats, sizeof(*stats))) {
+			kfree(stats);
+			ret = -EFAULT;
+			goto out;
+		}
+		kfree(stats);
+		break;
+	}
+	case ZRAMIO_INIT:
+		ret = zram_ioctl_init_device(zram);
+		break;
+
+	case ZRAMIO_RESET:
+		/* Do not reset an active device! */
+		if (bdev->bd_holders) {
+			ret = -EBUSY;
+			goto out;
+		}
+
+		/* Make sure all pending I/O is finished */
+		if (bdev)
+			fsync_bdev(bdev);
+
+		ret = zram_ioctl_reset_device(zram);
+		break;
+
+	default:
+		pr_info("Invalid ioctl %u\n", cmd);
+		ret = -ENOTTY;
+	}
+
+out:
+	return ret;
+}
+
+void zram_slot_free_notify(struct block_device *bdev, unsigned long index)
+{
+	struct zram *zram;
+
+	zram = bdev->bd_disk->private_data;
+	zram_free_page(zram, index);
+	zram_stat64_inc(zram, &zram->stats.notify_free);
+}
+
+static const struct block_device_operations zram_devops = {
+	.ioctl = zram_ioctl,
+	.swap_slot_free_notify = zram_slot_free_notify,
+	.owner = THIS_MODULE
+};
+
+static int create_device(struct zram *zram, int device_id)
+{
+	int ret = 0;
+
+	mutex_init(&zram->lock);
+	spin_lock_init(&zram->stat64_lock);
+
+	zram->queue = blk_alloc_queue(GFP_KERNEL);
+	if (!zram->queue) {
+		pr_err("Error allocating disk queue for device %d\n",
+			device_id);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	blk_queue_make_request(zram->queue, zram_make_request);
+	zram->queue->queuedata = zram;
+
+	 /* gendisk structure */
+	zram->disk = alloc_disk(1);
+	if (!zram->disk) {
+		blk_cleanup_queue(zram->queue);
+		pr_warning("Error allocating disk structure for device %d\n",
+			device_id);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	zram->disk->major = zram_major;
+	zram->disk->first_minor = device_id;
+	zram->disk->fops = &zram_devops;
+	zram->disk->queue = zram->queue;
+	zram->disk->private_data = zram;
+	snprintf(zram->disk->disk_name, 16, "zram%d", device_id);
+
+	/* Actual capacity set using ZRAMIO_SET_DISKSIZE_KB ioctl */
+	set_capacity(zram->disk, 0);
+
+	/*
+	 * To ensure that we always get PAGE_SIZE aligned
+	 * and n*PAGE_SIZED sized I/O requests.
+	 */
+	blk_queue_physical_block_size(zram->disk->queue, PAGE_SIZE);
+	blk_queue_logical_block_size(zram->disk->queue, PAGE_SIZE);
+	blk_queue_io_min(zram->disk->queue, PAGE_SIZE);
+	blk_queue_io_opt(zram->disk->queue, PAGE_SIZE);
+
+	add_disk(zram->disk);
+
+	zram->init_done = 0;
+
+out:
+	return ret;
+}
+
+static void destroy_device(struct zram *zram)
+{
+	if (zram->disk) {
+		del_gendisk(zram->disk);
+		put_disk(zram->disk);
+	}
+
+	if (zram->queue)
+		blk_cleanup_queue(zram->queue);
+}
+
+static int __init zram_init(void)
+{
+	int ret, dev_id;
+
+	if (num_devices > max_num_devices) {
+		pr_warning("Invalid value for num_devices: %u\n",
+				num_devices);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	zram_major = register_blkdev(0, "zram");
+	if (zram_major <= 0) {
+		pr_warning("Unable to get major number\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (!num_devices) {
+		pr_info("num_devices not specified. Using default: 1\n");
+		num_devices = 1;
+	}
+
+	/* Allocate the device array and initialize each one */
+	pr_info("Creating %u devices ...\n", num_devices);
+	devices = kzalloc(num_devices * sizeof(struct zram), GFP_KERNEL);
+	if (!devices) {
+		ret = -ENOMEM;
+		goto unregister;
+	}
+
+	for (dev_id = 0; dev_id < num_devices; dev_id++) {
+		ret = create_device(&devices[dev_id], dev_id);
+		if (ret)
+			goto free_devices;
+	}
+
+	return 0;
+
+free_devices:
+	while (dev_id)
+		destroy_device(&devices[--dev_id]);
+unregister:
+	unregister_blkdev(zram_major, "zram");
+out:
+	return ret;
+}
+
+static void __exit zram_exit(void)
+{
+	int i;
+	struct zram *zram;
+
+	for (i = 0; i < num_devices; i++) {
+		zram = &devices[i];
+
+		destroy_device(zram);
+		if (zram->init_done)
+			reset_device(zram);
+	}
+
+	unregister_blkdev(zram_major, "zram");
+
+	kfree(devices);
+	pr_debug("Cleanup done!\n");
+}
+
+module_param(num_devices, uint, 0);
+MODULE_PARM_DESC(num_devices, "Number of zram devices");
+
+module_init(zram_init);
+module_exit(zram_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Nitin Gupta <ngupta@vflare.org>");
+MODULE_DESCRIPTION("Compressed RAM Block Device");
diff --git a/drivers/staging/ramzswap/ramzswap_drv.h b/drivers/staging/zram/zram_drv.h
index 63c30420df2..945f9740442 100644
--- a/drivers/staging/ramzswap/ramzswap_drv.h
+++ b/drivers/staging/zram/zram_drv.h
@@ -1,5 +1,5 @@
 /*
- * Compressed RAM based swap device
+ * Compressed RAM block device
  *
  * Copyright (C) 2008, 2009, 2010  Nitin Gupta
  *
@@ -12,13 +12,13 @@
  * Project home: http://compcache.googlecode.com
  */
 
-#ifndef _RAMZSWAP_DRV_H_
-#define _RAMZSWAP_DRV_H_
+#ifndef _ZRAM_DRV_H_
+#define _ZRAM_DRV_H_
 
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include "ramzswap_ioctl.h"
+#include "zram_ioctl.h"
 #include "xvmalloc.h"
 
 /*
@@ -41,7 +41,7 @@ struct zobj_header {
 
 /*-- Configurable parameters */
 
-/* Default ramzswap disk size: 25% of total RAM */
+/* Default zram disk size: 25% of total RAM */
 static const unsigned default_disksize_perc_ram = 25;
 
 /*
@@ -63,23 +63,20 @@ static const unsigned max_zpage_size = PAGE_SIZE / 4 * 3;
 #define SECTORS_PER_PAGE_SHIFT	(PAGE_SHIFT - SECTOR_SHIFT)
 #define SECTORS_PER_PAGE	(1 << SECTORS_PER_PAGE_SHIFT)
 
-/* Flags for ramzswap pages (table[page_no].flags) */
-enum rzs_pageflags {
+/* Flags for zram pages (table[page_no].flags) */
+enum zram_pageflags {
 	/* Page is stored uncompressed */
-	RZS_UNCOMPRESSED,
+	ZRAM_UNCOMPRESSED,
 
 	/* Page consists entirely of zeros */
-	RZS_ZERO,
+	ZRAM_ZERO,
 
-	__NR_RZS_PAGEFLAGS,
+	__NR_ZRAM_PAGEFLAGS,
 };
 
 /*-- Data structures */
 
-/*
- * Allocated for each swap slot, indexed by page no.
- * These table entries must fit exactly in a page.
- */
+/* Allocated for each disk page */
 struct table {
 	struct page *page;
 	u16 offset;
@@ -87,17 +84,17 @@ struct table {
 	u8 flags;
 } __attribute__((aligned(4)));
 
-struct ramzswap_stats {
+struct zram_stats {
 	/* basic stats */
 	size_t compr_size;	/* compressed size of pages stored -
 				 * needed to enforce memlimit */
 	/* more stats */
-#if defined(CONFIG_RAMZSWAP_STATS)
+#if defined(CONFIG_ZRAM_STATS)
 	u64 num_reads;		/* failed + successful */
 	u64 num_writes;		/* --do-- */
 	u64 failed_reads;	/* should NEVER! happen */
 	u64 failed_writes;	/* can happen when memory is too low */
-	u64 invalid_io;		/* non-swap I/O requests */
+	u64 invalid_io;		/* non-page-aligned I/O requests */
 	u64 notify_free;	/* no. of swap slot free notifications */
 	u32 pages_zero;		/* no. of zero filled pages */
 	u32 pages_stored;	/* no. of pages currently stored */
@@ -106,62 +103,62 @@ struct ramzswap_stats {
 #endif
 };
 
-struct ramzswap {
+struct zram {
 	struct xv_pool *mem_pool;
 	void *compress_workmem;
 	void *compress_buffer;
 	struct table *table;
 	spinlock_t stat64_lock;	/* protect 64-bit stats */
-	struct mutex lock;
+	struct mutex lock;	/* protect compression buffers against
+				 * concurrent writes */
 	struct request_queue *queue;
 	struct gendisk *disk;
 	int init_done;
 	/*
-	 * This is limit on amount of *uncompressed* worth of data
-	 * we can hold. When backing swap device is provided, it is
-	 * set equal to device size.
+	 * This is the limit on amount of *uncompressed* worth of data
+	 * we can store in a disk.
 	 */
 	size_t disksize;	/* bytes */
 
-	struct ramzswap_stats stats;
+	struct zram_stats stats;
 };
 
 /*-- */
 
 /* Debugging and Stats */
-#if defined(CONFIG_RAMZSWAP_STATS)
-static void rzs_stat_inc(u32 *v)
+#if defined(CONFIG_ZRAM_STATS)
+static void zram_stat_inc(u32 *v)
 {
 	*v = *v + 1;
 }
 
-static void rzs_stat_dec(u32 *v)
+static void zram_stat_dec(u32 *v)
 {
 	*v = *v - 1;
 }
 
-static void rzs_stat64_inc(struct ramzswap *rzs, u64 *v)
+static void zram_stat64_inc(struct zram *zram, u64 *v)
 {
-	spin_lock(&rzs->stat64_lock);
+	spin_lock(&zram->stat64_lock);
 	*v = *v + 1;
-	spin_unlock(&rzs->stat64_lock);
+	spin_unlock(&zram->stat64_lock);
 }
 
-static u64 rzs_stat64_read(struct ramzswap *rzs, u64 *v)
+static u64 zram_stat64_read(struct zram *zram, u64 *v)
 {
 	u64 val;
 
-	spin_lock(&rzs->stat64_lock);
+	spin_lock(&zram->stat64_lock);
 	val = *v;
-	spin_unlock(&rzs->stat64_lock);
+	spin_unlock(&zram->stat64_lock);
 
 	return val;
 }
 #else
-#define rzs_stat_inc(v)
-#define rzs_stat_dec(v)
-#define rzs_stat64_inc(r, v)
-#define rzs_stat64_read(r, v)
-#endif /* CONFIG_RAMZSWAP_STATS */
+#define zram_stat_inc(v)
+#define zram_stat_dec(v)
+#define zram_stat64_inc(r, v)
+#define zram_stat64_read(r, v)
+#endif /* CONFIG_ZRAM_STATS */
 
 #endif
diff --git a/drivers/staging/ramzswap/ramzswap_ioctl.h b/drivers/staging/zram/zram_ioctl.h
index db94bcb4296..5c415fa4f17 100644
--- a/drivers/staging/ramzswap/ramzswap_ioctl.h
+++ b/drivers/staging/zram/zram_ioctl.h
@@ -1,5 +1,5 @@
 /*
- * Compressed RAM based swap device
+ * Compressed RAM block device
  *
  * Copyright (C) 2008, 2009, 2010  Nitin Gupta
  *
@@ -12,17 +12,16 @@
  * Project home: http://compcache.googlecode.com
  */
 
-#ifndef _RAMZSWAP_IOCTL_H_
-#define _RAMZSWAP_IOCTL_H_
+#ifndef _ZRAM_IOCTL_H_
+#define _ZRAM_IOCTL_H_
 
-struct ramzswap_ioctl_stats {
-	u64 disksize;		/* user specified or equal to backing swap
-				 * size (if present) */
+struct zram_ioctl_stats {
+	u64 disksize;		/* disksize in bytes (user specifies in KB) */
 	u64 num_reads;		/* failed + successful */
 	u64 num_writes;		/* --do-- */
 	u64 failed_reads;	/* should NEVER! happen */
 	u64 failed_writes;	/* can happen when memory is too low */
-	u64 invalid_io;		/* non-swap I/O requests */
+	u64 invalid_io;		/* non-page-aligned I/O requests */
 	u64 notify_free;	/* no. of swap slot free notifications */
 	u32 pages_zero;		/* no. of zero filled pages */
 	u32 good_compress_pct;	/* no. of pages with compression ratio<=50% */
@@ -34,9 +33,9 @@ struct ramzswap_ioctl_stats {
 	u64 mem_used_total;
 } __attribute__ ((packed, aligned(4)));
 
-#define RZSIO_SET_DISKSIZE_KB	_IOW('z', 0, size_t)
-#define RZSIO_GET_STATS		_IOR('z', 1, struct ramzswap_ioctl_stats)
-#define RZSIO_INIT		_IO('z', 2)
-#define RZSIO_RESET		_IO('z', 3)
+#define ZRAMIO_SET_DISKSIZE_KB	_IOW('z', 0, size_t)
+#define ZRAMIO_GET_STATS	_IOR('z', 1, struct zram_ioctl_stats)
+#define ZRAMIO_INIT		_IO('z', 2)
+#define ZRAMIO_RESET		_IO('z', 3)
 
 #endif
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index 99cb2246ac7..a1900e50251 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -8,7 +8,6 @@
 #include <linux/errno.h>	/* error codes */
 #include <linux/slab.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
@@ -33,9 +32,8 @@ static int ixj_probe(struct pcmcia_device *p_dev)
 {
 	dev_dbg(&p_dev->dev, "ixj_attach()\n");
 	/* Create new ixj device */
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	p_dev->io.IOAddrLines = 3;
+	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 	p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
 	if (!p_dev->priv) {
@@ -121,13 +119,14 @@ static int ixj_config_check(struct pcmcia_device *p_dev,
 {
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
+		p_dev->io_lines = 3;
 		if (io->nwin == 2) {
-			p_dev->io.BasePort2 = io->win[1].base;
-			p_dev->io.NumPorts2 = io->win[1].len;
+			p_dev->resource[1]->start = io->win[1].base;
+			p_dev->resource[1]->end = io->win[1].len;
 		}
-		if (!pcmcia_request_io(p_dev, &p_dev->io))
+		if (!pcmcia_request_io(p_dev))
 			return 0;
 	}
 	return -ENODEV;
@@ -151,7 +150,8 @@ static int ixj_config(struct pcmcia_device * link)
 	/*
  	 *	Register the card with the core.
 	 */
-	j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
+	j = ixj_pcmcia_probe(link->resource[0]->start,
+			     link->resource[0]->start + 0x10);
 
 	info->ndev = 1;
 	ixj_get_serial(link, j);
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index 371f87f8bc2..a8ea2f19a0c 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -79,7 +79,7 @@ static int __devinit hilscher_pci_probe(struct pci_dev *dev,
 	}
 	info->version = "0.0.1";
 	info->irq = dev->irq;
-	info->irq_flags = IRQF_DISABLED | IRQF_SHARED;
+	info->irq_flags = IRQF_SHARED;
 	info->handler = hilscher_handler;
 
 	if (uio_register_device(&dev->dev, info))
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index 61e569df2bb..7174d518b8a 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -155,7 +155,6 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
 	 * Interrupt sharing is not supported.
 	 */
 
-	uioinfo->irq_flags |= IRQF_DISABLED;
 	uioinfo->handler = uio_pdrv_genirq_handler;
 	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
 	uioinfo->open = uio_pdrv_genirq_open;
diff --git a/drivers/uio/uio_sercos3.c b/drivers/uio/uio_sercos3.c
index 3d461cd73e6..a187fa14c5c 100644
--- a/drivers/uio/uio_sercos3.c
+++ b/drivers/uio/uio_sercos3.c
@@ -154,7 +154,7 @@ static int __devinit sercos3_pci_probe(struct pci_dev *dev,
 	info->name = "Sercos_III_PCI";
 	info->version = "0.0.1";
 	info->irq = dev->irq;
-	info->irq_flags = IRQF_DISABLED | IRQF_SHARED;
+	info->irq_flags = IRQF_SHARED;
 	info->handler = sercos3_handler;
 	info->irqcontrol = sercos3_irqcontrol;
 
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6a58cb1330c..4aa00e6e57a 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -45,7 +45,8 @@ config USB_ARCH_HAS_OHCI
 	default y if STB03xxx
 	default y if PPC_MPC52xx
 	# MIPS:
-	default y if SOC_AU1X00
+	default y if MIPS_ALCHEMY
+	default y if MACH_JZ4740
 	# SH:
 	default y if CPU_SUBTYPE_SH7720
 	default y if CPU_SUBTYPE_SH7721
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index b91115f84b1..1f48ceb55a7 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -61,7 +61,7 @@ DECLARE_UAC_AC_HEADER_DESCRIPTOR(2);
 #define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \
 	+ UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0))
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static struct uac_ac_header_descriptor_v1_2 ac_header_desc = {
+static struct uac1_ac_header_descriptor_2 ac_header_desc = {
 	.bLength =		UAC_DT_AC_HEADER_LENGTH,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	UAC_HEADER,
@@ -125,7 +125,7 @@ static struct usb_audio_control_selector feature_unit = {
 };
 
 #define OUTPUT_TERMINAL_ID	3
-static struct uac_output_terminal_descriptor_v1 output_terminal_desc = {
+static struct uac1_output_terminal_descriptor output_terminal_desc = {
 	.bLength		= UAC_DT_OUTPUT_TERMINAL_SIZE,
 	.bDescriptorType	= USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype	= UAC_OUTPUT_TERMINAL,
@@ -155,7 +155,7 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = {
 };
 
 /* B.4.2  Class-Specific AS Interface Descriptor */
-static struct uac_as_header_descriptor_v1 as_header_desc = {
+static struct uac1_as_header_descriptor as_header_desc = {
 	.bLength =		UAC_DT_AS_HEADER_SIZE,
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	UAC_AS_GENERAL,
diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c
index 82506ca297d..9648b75f028 100644
--- a/drivers/usb/gadget/fsl_qe_udc.c
+++ b/drivers/usb/gadget/fsl_qe_udc.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/moduleparam.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/ch9.h>
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 2b56ce62185..b7bf88019b0 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -238,7 +238,7 @@ static const struct usb_interface_descriptor ac_interface_desc = {
 };
 
 /* B.3.2  Class-Specific AC Interface Descriptor */
-static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = {
+static const struct uac1_ac_header_descriptor_1 ac_header_desc = {
 	.bLength =		UAC_DT_AC_HEADER_SIZE(1),
 	.bDescriptorType =	USB_DT_CS_INTERFACE,
 	.bDescriptorSubtype =	USB_MS_HEADER,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index fc576557d8a..02864a237a2 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1031,7 +1031,7 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_ep93xx_driver
 #endif
 
-#ifdef CONFIG_SOC_AU1X00
+#ifdef CONFIG_MIPS_ALCHEMY
 #include "ohci-au1xxx.c"
 #define PLATFORM_DRIVER		ohci_hcd_au1xxx_driver
 #endif
@@ -1095,6 +1095,11 @@ MODULE_LICENSE ("GPL");
 #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
 #endif
 
+#ifdef CONFIG_MACH_JZ4740
+#include "ohci-jz4740.c"
+#define PLATFORM_DRIVER	ohci_hcd_jz4740_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
new file mode 100644
index 00000000000..10e1872f3ab
--- /dev/null
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -0,0 +1,276 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+struct jz4740_ohci_hcd {
+	struct ohci_hcd ohci_hcd;
+
+	struct regulator *vbus;
+	bool vbus_enabled;
+	struct clk *clk;
+};
+
+static inline struct jz4740_ohci_hcd *hcd_to_jz4740_hcd(struct usb_hcd *hcd)
+{
+	return (struct jz4740_ohci_hcd *)(hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *jz4740_hcd_to_hcd(struct jz4740_ohci_hcd *jz4740_ohci)
+{
+	return container_of((void *)jz4740_ohci, struct usb_hcd, hcd_priv);
+}
+
+static int ohci_jz4740_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int	ret;
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ohci->num_ports = 1;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		dev_err(hcd->self.controller, "Can not start %s",
+			hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static int ohci_jz4740_set_vbus_power(struct jz4740_ohci_hcd *jz4740_ohci,
+	bool enabled)
+{
+	int ret = 0;
+
+	if (!jz4740_ohci->vbus)
+		return 0;
+
+	if (enabled && !jz4740_ohci->vbus_enabled) {
+		ret = regulator_enable(jz4740_ohci->vbus);
+		if (ret)
+			dev_err(jz4740_hcd_to_hcd(jz4740_ohci)->self.controller,
+				"Could not power vbus\n");
+	} else if (!enabled && jz4740_ohci->vbus_enabled) {
+		ret = regulator_disable(jz4740_ohci->vbus);
+	}
+
+	if (ret == 0)
+		jz4740_ohci->vbus_enabled = enabled;
+
+	return ret;
+}
+
+static int ohci_jz4740_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+	u16 wIndex, char *buf, u16 wLength)
+{
+	struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd);
+	int ret;
+
+	switch (typeReq) {
+	case SetHubFeature:
+		if (wValue == USB_PORT_FEAT_POWER)
+			ret = ohci_jz4740_set_vbus_power(jz4740_ohci, true);
+		break;
+	case ClearHubFeature:
+		if (wValue == USB_PORT_FEAT_POWER)
+			ret = ohci_jz4740_set_vbus_power(jz4740_ohci, false);
+		break;
+	}
+
+	if (ret)
+		return ret;
+
+	return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+}
+
+
+static const struct hc_driver ohci_jz4740_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"JZ4740 OHCI",
+	.hcd_priv_size =	sizeof(struct jz4740_ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_jz4740_start,
+	.stop =			ohci_stop,
+	.shutdown =		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_jz4740_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+
+static __devinit int jz4740_ohci_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct usb_hcd *hcd;
+	struct jz4740_ohci_hcd *jz4740_ohci;
+	struct resource *res;
+	int irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Failed to get platform irq\n");
+		return irq;
+	}
+
+	hcd = usb_create_hcd(&ohci_jz4740_hc_driver, &pdev->dev, "jz4740");
+	if (!hcd) {
+		dev_err(&pdev->dev, "Failed to create hcd.\n");
+		return -ENOMEM;
+	}
+
+	jz4740_ohci = hcd_to_jz4740_hcd(hcd);
+
+	res = request_mem_region(res->start, resource_size(res), hcd_name);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to request mem region.\n");
+		ret = -EBUSY;
+		goto err_free;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = ioremap(res->start, resource_size(res));
+
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "Failed to ioremap registers.\n");
+		ret = -EBUSY;
+		goto err_release_mem;
+	}
+
+	jz4740_ohci->clk = clk_get(&pdev->dev, "uhc");
+	if (IS_ERR(jz4740_ohci->clk)) {
+		ret = PTR_ERR(jz4740_ohci->clk);
+		dev_err(&pdev->dev, "Failed to get clock: %d\n", ret);
+		goto err_iounmap;
+	}
+
+	jz4740_ohci->vbus = regulator_get(&pdev->dev, "vbus");
+	if (IS_ERR(jz4740_ohci->vbus))
+		jz4740_ohci->vbus = NULL;
+
+
+	clk_set_rate(jz4740_ohci->clk, 48000000);
+	clk_enable(jz4740_ohci->clk);
+	if (jz4740_ohci->vbus)
+		ohci_jz4740_set_vbus_power(jz4740_ohci, true);
+
+	platform_set_drvdata(pdev, hcd);
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	ret = usb_add_hcd(hcd, irq, 0);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add hcd: %d\n", ret);
+		goto err_disable;
+	}
+
+	return 0;
+
+err_disable:
+	platform_set_drvdata(pdev, NULL);
+	if (jz4740_ohci->vbus) {
+		regulator_disable(jz4740_ohci->vbus);
+		regulator_put(jz4740_ohci->vbus);
+	}
+	clk_disable(jz4740_ohci->clk);
+
+	clk_put(jz4740_ohci->clk);
+err_iounmap:
+	iounmap(hcd->regs);
+err_release_mem:
+	release_mem_region(res->start, resource_size(res));
+err_free:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static __devexit int jz4740_ohci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd);
+
+	usb_remove_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (jz4740_ohci->vbus) {
+		regulator_disable(jz4740_ohci->vbus);
+		regulator_put(jz4740_ohci->vbus);
+	}
+
+	clk_disable(jz4740_ohci->clk);
+	clk_put(jz4740_ohci->clk);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static struct platform_driver ohci_hcd_jz4740_driver = {
+	.probe = jz4740_ohci_probe,
+	.remove = __devexit_p(jz4740_ohci_remove),
+	.driver = {
+		.name = "jz4740-ohci",
+		.owner = THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS("platfrom:jz4740-ohci");
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 58cb73c8420..0e13a00eb2e 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -20,7 +20,6 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
@@ -43,8 +42,6 @@ MODULE_LICENSE("GPL");
 /* VARIABLES                                                          */
 /*====================================================================*/
 
-static const char driver_name[DEV_NAME_LEN]  = "sl811_cs";
-
 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
 } local_info_t;
@@ -165,16 +162,16 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev,
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
-	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
 
-		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		p_dev->io.BasePort1 = io->win[0].base;
-		p_dev->io.NumPorts1 = io->win[0].len;
+		p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+		p_dev->resource[0]->start = io->win[0].base;
+		p_dev->resource[0]->end = io->win[0].len;
 
-		return pcmcia_request_io(p_dev, &p_dev->io);
+		return pcmcia_request_io(p_dev);
 	}
 	pcmcia_disable_device(p_dev);
 	return -ENODEV;
@@ -192,7 +189,7 @@ static int sl811_cs_config(struct pcmcia_device *link)
 		goto failed;
 
 	/* require an IRQ and two registers */
-	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
+	if (resource_size(link->resource[0]) < 2)
 		goto failed;
 
 	if (!link->irq)
@@ -207,11 +204,10 @@ static int sl811_cs_config(struct pcmcia_device *link)
 	if (link->conf.Vpp)
 		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
 	printk(", irq %d", link->irq);
-	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
-	       link->io.BasePort1+link->io.NumPorts1-1);
+	printk(", io %pR", link->resource[0]);
 	printk("\n");
 
-	if (sl811_hc_init(parent, link->io.BasePort1, link->irq)
+	if (sl811_hc_init(parent, link->resource[0]->start, link->irq)
 			< 0) {
 failed:
 		printk(KERN_WARNING "sl811_cs_config failed\n");
@@ -246,7 +242,7 @@ MODULE_DEVICE_TABLE(pcmcia, sl811_ids);
 static struct pcmcia_driver sl811_cs_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
-		.name	= (char *)driver_name,
+		.name	= "sl811_cs",
 	},
 	.probe		= sl811_cs_probe,
 	.remove		= sl811_cs_detach,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3d94a147172..a9ca72f301b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1505,7 +1505,7 @@ config FB_SIS_315
 
 config FB_VIA
        tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI
+       depends on FB && PCI && X86
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT
@@ -1871,6 +1871,7 @@ config FB_MBX_DEBUG
 config FB_FSL_DIU
 	tristate "Freescale DIU framebuffer support"
 	depends on FB && FSL_SOC
+	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2229,6 +2230,15 @@ config FB_BROADSHEET
 	  and could also have been called by other names when coupled with
 	  a bridge adapter.
 
+config FB_JZ4740
+	tristate "JZ4740 LCD framebuffer support"
+	depends on FB && MACH_JZ4740
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	help
+	  Framebuffer support for the JZ4740 SoC.
+
 source "drivers/video/omap/Kconfig"
 source "drivers/video/omap2/Kconfig"
 
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ddc2af2ba45..f56a9cae215 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -131,6 +131,7 @@ obj-$(CONFIG_FB_CARMINE)          += carminefb.o
 obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
 obj-$(CONFIG_FB_MSM)              += msm/
 obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
+obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
diff --git a/drivers/video/bw2.c b/drivers/video/bw2.c
index 09f1b9b462f..c7796637baf 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/bw2.c
@@ -390,12 +390,12 @@ static int __init bw2_init(void)
 	if (fb_get_options("bw2fb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&bw2_driver, &of_bus_type);
+	return of_register_platform_driver(&bw2_driver);
 }
 
 static void __exit bw2_exit(void)
 {
-	of_unregister_driver(&bw2_driver);
+	of_unregister_platform_driver(&bw2_driver);
 }
 
 module_init(bw2_init);
diff --git a/drivers/video/cg14.c b/drivers/video/cg14.c
index e5dc2241194..d09fde8beb6 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/cg14.c
@@ -610,12 +610,12 @@ static int __init cg14_init(void)
 	if (fb_get_options("cg14fb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&cg14_driver, &of_bus_type);
+	return of_register_platform_driver(&cg14_driver);
 }
 
 static void __exit cg14_exit(void)
 {
-	of_unregister_driver(&cg14_driver);
+	of_unregister_platform_driver(&cg14_driver);
 }
 
 module_init(cg14_init);
diff --git a/drivers/video/cg3.c b/drivers/video/cg3.c
index 558d73a948a..64aa29809fb 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/cg3.c
@@ -477,12 +477,12 @@ static int __init cg3_init(void)
 	if (fb_get_options("cg3fb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&cg3_driver, &of_bus_type);
+	return of_register_platform_driver(&cg3_driver);
 }
 
 static void __exit cg3_exit(void)
 {
-	of_unregister_driver(&cg3_driver);
+	of_unregister_platform_driver(&cg3_driver);
 }
 
 module_init(cg3_init);
diff --git a/drivers/video/cg6.c b/drivers/video/cg6.c
index 480d761a27a..2389a719dcc 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/cg6.c
@@ -870,12 +870,12 @@ static int __init cg6_init(void)
 	if (fb_get_options("cg6fb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&cg6_driver, &of_bus_type);
+	return of_register_platform_driver(&cg6_driver);
 }
 
 static void __exit cg6_exit(void)
 {
-	of_unregister_driver(&cg6_driver);
+	of_unregister_platform_driver(&cg6_driver);
 }
 
 module_init(cg6_init);
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 8e8f18d29d7..5a35f22372b 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 && !MN10300
+	depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER)
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b0a3fa00706..3b3f5749af9 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -2342,6 +2342,30 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
 	return 0;
 }
 
+static int fbcon_debug_enter(struct vc_data *vc)
+{
+	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
+	struct fbcon_ops *ops = info->fbcon_par;
+
+	ops->save_graphics = ops->graphics;
+	ops->graphics = 0;
+	if (info->fbops->fb_debug_enter)
+		info->fbops->fb_debug_enter(info);
+	fbcon_set_palette(vc, color_table);
+	return 0;
+}
+
+static int fbcon_debug_leave(struct vc_data *vc)
+{
+	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
+	struct fbcon_ops *ops = info->fbcon_par;
+
+	ops->graphics = ops->save_graphics;
+	if (info->fbops->fb_debug_leave)
+		info->fbops->fb_debug_leave(info);
+	return 0;
+}
+
 static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 {
 	u8 *fontdata = vc->vc_font.data;
@@ -3276,6 +3300,8 @@ static const struct consw fb_con = {
 	.con_screen_pos 	= fbcon_screen_pos,
 	.con_getxy 		= fbcon_getxy,
 	.con_resize             = fbcon_resize,
+	.con_debug_enter	= fbcon_debug_enter,
+	.con_debug_leave	= fbcon_debug_leave,
 };
 
 static struct notifier_block fbcon_event_notifier = {
diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h
index 89a346880ec..6bd2e0c7f20 100644
--- a/drivers/video/console/fbcon.h
+++ b/drivers/video/console/fbcon.h
@@ -74,6 +74,7 @@ struct fbcon_ops {
 	int    cursor_reset;
 	int    blank_state;
 	int    graphics;
+	int    save_graphics; /* for debug enter/leave */
 	int    flags;
 	int    rotate;
 	int    cur_rotate;
diff --git a/drivers/video/controlfb.c b/drivers/video/controlfb.c
index 49fcbe8f18a..c225dcce89e 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/controlfb.c
@@ -40,6 +40,8 @@
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/pci.h>
diff --git a/drivers/video/ffb.c b/drivers/video/ffb.c
index 95c0227f47f..f6ecfab296d 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/ffb.c
@@ -1067,12 +1067,12 @@ static int __init ffb_init(void)
 	if (fb_get_options("ffb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&ffb_driver, &of_bus_type);
+	return of_register_platform_driver(&ffb_driver);
 }
 
 static void __exit ffb_exit(void)
 {
-	of_unregister_driver(&ffb_driver);
+	of_unregister_platform_driver(&ffb_driver);
 }
 
 module_init(ffb_init);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 27455ce298b..e38ad222454 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -34,7 +34,8 @@
 #include <linux/of_platform.h>
 
 #include <sysdev/fsl_soc.h>
-#include "fsl-diu-fb.h"
+#include <linux/fsl-diu-fb.h>
+#include "edid.h"
 
 /*
  * These parameters give default parameters
@@ -217,6 +218,7 @@ struct mfb_info {
 	int x_aoi_d;		/* aoi display x offset to physical screen */
 	int y_aoi_d;		/* aoi display y offset to physical screen */
 	struct fsl_diu_data *parent;
+	u8 *edid_data;
 };
 
 
@@ -317,6 +319,17 @@ static void fsl_diu_free(void *virt, size_t size)
 		free_pages_exact(virt, size);
 }
 
+/*
+ * Workaround for failed writing desc register of planes.
+ * Needed with MPC5121 DIU rev 2.0 silicon.
+ */
+void wr_reg_wa(u32 *reg, u32 val)
+{
+	do {
+		out_be32(reg, val);
+	} while (in_be32(reg) != val);
+}
+
 static int fsl_diu_enable_panel(struct fb_info *info)
 {
 	struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
@@ -330,7 +343,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 		switch (mfbi->index) {
 		case 0:				/* plane 0 */
 			if (hw->desc[0] != ad->paddr)
-				out_be32(&hw->desc[0], ad->paddr);
+				wr_reg_wa(&hw->desc[0], ad->paddr);
 			break;
 		case 1:				/* plane 1 AOI 0 */
 			cmfbi = machine_data->fsl_diu_info[2]->par;
@@ -340,7 +353,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 						cpu_to_le32(cmfbi->ad->paddr);
 				else
 					ad->next_ad = 0;
-				out_be32(&hw->desc[1], ad->paddr);
+				wr_reg_wa(&hw->desc[1], ad->paddr);
 			}
 			break;
 		case 3:				/* plane 2 AOI 0 */
@@ -351,14 +364,14 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 						cpu_to_le32(cmfbi->ad->paddr);
 				else
 					ad->next_ad = 0;
-				out_be32(&hw->desc[2], ad->paddr);
+				wr_reg_wa(&hw->desc[2], ad->paddr);
 			}
 			break;
 		case 2:				/* plane 1 AOI 1 */
 			pmfbi = machine_data->fsl_diu_info[1]->par;
 			ad->next_ad = 0;
 			if (hw->desc[1] == machine_data->dummy_ad->paddr)
-				out_be32(&hw->desc[1], ad->paddr);
+				wr_reg_wa(&hw->desc[1], ad->paddr);
 			else					/* AOI0 open */
 				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
 			break;
@@ -366,7 +379,7 @@ static int fsl_diu_enable_panel(struct fb_info *info)
 			pmfbi = machine_data->fsl_diu_info[3]->par;
 			ad->next_ad = 0;
 			if (hw->desc[2] == machine_data->dummy_ad->paddr)
-				out_be32(&hw->desc[2], ad->paddr);
+				wr_reg_wa(&hw->desc[2], ad->paddr);
 			else				/* AOI0 was open */
 				pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
 			break;
@@ -390,27 +403,24 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 	switch (mfbi->index) {
 	case 0:					/* plane 0 */
 		if (hw->desc[0] != machine_data->dummy_ad->paddr)
-			out_be32(&hw->desc[0],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr);
 		break;
 	case 1:					/* plane 1 AOI 0 */
 		cmfbi = machine_data->fsl_diu_info[2]->par;
 		if (cmfbi->count > 0)	/* AOI1 is open */
-			out_be32(&hw->desc[1], cmfbi->ad->paddr);
+			wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
 					/* move AOI1 to the first */
 		else			/* AOI1 was closed */
-			out_be32(&hw->desc[1],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
 					/* close AOI 0 */
 		break;
 	case 3:					/* plane 2 AOI 0 */
 		cmfbi = machine_data->fsl_diu_info[4]->par;
 		if (cmfbi->count > 0)	/* AOI1 is open */
-			out_be32(&hw->desc[2], cmfbi->ad->paddr);
+			wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
 					/* move AOI1 to the first */
 		else			/* AOI1 was closed */
-			out_be32(&hw->desc[2],
-				machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
 					/* close AOI 0 */
 		break;
 	case 2:					/* plane 1 AOI 1 */
@@ -421,7 +431,7 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 					/* AOI0 is open, must be the first */
 				pmfbi->ad->next_ad = 0;
 		} else			/* AOI1 is the first in the chain */
-			out_be32(&hw->desc[1], machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
 					/* close AOI 1 */
 		break;
 	case 4:					/* plane 2 AOI 1 */
@@ -432,7 +442,7 @@ static int fsl_diu_disable_panel(struct fb_info *info)
 				/* AOI0 is open, must be the first */
 				pmfbi->ad->next_ad = 0;
 		} else		/* AOI1 is the first in the chain */
-			out_be32(&hw->desc[2], machine_data->dummy_ad->paddr);
+			wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
 				/* close AOI 1 */
 		break;
 	default:
@@ -1100,6 +1110,10 @@ static int fsl_diu_open(struct fb_info *info, int user)
 	struct mfb_info *mfbi = info->par;
 	int res = 0;
 
+	/* free boot splash memory on first /dev/fb0 open */
+	if (!mfbi->index && diu_ops.release_bootmem)
+		diu_ops.release_bootmem();
+
 	spin_lock(&diu_lock);
 	mfbi->count++;
 	if (mfbi->count == 1) {
@@ -1173,18 +1187,30 @@ static int __devinit install_fb(struct fb_info *info)
 	int rc;
 	struct mfb_info *mfbi = info->par;
 	const char *aoi_mode, *init_aoi_mode = "320x240";
+	struct fb_videomode *db = fsl_diu_mode_db;
+	unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
+	int has_default_mode = 1;
 
 	if (init_fbinfo(info))
 		return -EINVAL;
 
-	if (mfbi->index == 0)	/* plane 0 */
+	if (mfbi->index == 0) {	/* plane 0 */
+		if (mfbi->edid_data) {
+			/* Now build modedb from EDID */
+			fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
+			fb_videomode_to_modelist(info->monspecs.modedb,
+						 info->monspecs.modedb_len,
+						 &info->modelist);
+			db = info->monspecs.modedb;
+			dbsize = info->monspecs.modedb_len;
+		}
 		aoi_mode = fb_mode;
-	else
+	} else {
 		aoi_mode = init_aoi_mode;
+	}
 	pr_debug("mode used = %s\n", aoi_mode);
-	rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
-	     ARRAY_SIZE(fsl_diu_mode_db), &fsl_diu_default_mode, default_bpp);
-
+	rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize,
+			  &fsl_diu_default_mode, default_bpp);
 	switch (rc) {
 	case 1:
 		pr_debug("using mode specified in @mode\n");
@@ -1202,10 +1228,50 @@ static int __devinit install_fb(struct fb_info *info)
 	default:
 		pr_debug("rc = %d\n", rc);
 		pr_debug("failed to find mode\n");
-		return -EINVAL;
+		/*
+		 * For plane 0 we continue and look into
+		 * driver's internal modedb.
+		 */
+		if (mfbi->index == 0 && mfbi->edid_data)
+			has_default_mode = 0;
+		else
+			return -EINVAL;
 		break;
 	}
 
+	if (!has_default_mode) {
+		rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
+				  ARRAY_SIZE(fsl_diu_mode_db),
+				  &fsl_diu_default_mode,
+				  default_bpp);
+		if (rc > 0 && rc < 5)
+			has_default_mode = 1;
+	}
+
+	/* Still not found, use preferred mode from database if any */
+	if (!has_default_mode && info->monspecs.modedb) {
+		struct fb_monspecs *specs = &info->monspecs;
+		struct fb_videomode *modedb = &specs->modedb[0];
+
+		/*
+		 * Get preferred timing. If not found,
+		 * first mode in database will be used.
+		 */
+		if (specs->misc & FB_MISC_1ST_DETAIL) {
+			int i;
+
+			for (i = 0; i < specs->modedb_len; i++) {
+				if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
+					modedb = &specs->modedb[i];
+					break;
+				}
+			}
+		}
+
+		info->var.bits_per_pixel = default_bpp;
+		fb_videomode_to_var(&info->var, modedb);
+	}
+
 	pr_debug("xres_virtual %d\n", info->var.xres_virtual);
 	pr_debug("bits_per_pixel %d\n", info->var.bits_per_pixel);
 
@@ -1244,6 +1310,9 @@ static void uninstall_fb(struct fb_info *info)
 	if (!mfbi->registered)
 		return;
 
+	if (mfbi->index == 0)
+		kfree(mfbi->edid_data);
+
 	unregister_framebuffer(info);
 	unmap_video_memory(info);
 	if (&info->cmap)
@@ -1427,6 +1496,7 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	int ret, i, error = 0;
 	struct resource res;
 	struct fsl_diu_data *machine_data;
+	int diu_mode;
 
 	machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
 	if (!machine_data)
@@ -1443,6 +1513,17 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 		mfbi = machine_data->fsl_diu_info[i]->par;
 		memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
 		mfbi->parent = machine_data;
+
+		if (mfbi->index == 0) {
+			const u8 *prop;
+			int len;
+
+			/* Get EDID */
+			prop = of_get_property(np, "edid", &len);
+			if (prop && len == EDID_LENGTH)
+				mfbi->edid_data = kmemdup(prop, EDID_LENGTH,
+							  GFP_KERNEL);
+		}
 	}
 
 	ret = of_address_to_resource(np, 0, &res);
@@ -1463,7 +1544,9 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 		goto error2;
 	}
 
-	out_be32(&dr.diu_reg->diu_mode, 0);		/* disable DIU anyway*/
+	diu_mode = in_be32(&dr.diu_reg->diu_mode);
+	if (diu_mode != MFB_MODE1)
+		out_be32(&dr.diu_reg->diu_mode, 0);	/* disable DIU */
 
 	/* Get the IRQ of the DIU */
 	machine_data->irq = irq_of_parse_and_map(np, 0);
@@ -1511,7 +1594,13 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	machine_data->dummy_ad->offset_xyd = 0;
 	machine_data->dummy_ad->next_ad = 0;
 
-	out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+	/*
+	 * Let DIU display splash screen if it was pre-initialized
+	 * by the bootloader, set dummy area descriptor otherwise.
+	 */
+	if (diu_mode != MFB_MODE1)
+		out_be32(&dr.diu_reg->desc[0], machine_data->dummy_ad->paddr);
+
 	out_be32(&dr.diu_reg->desc[1], machine_data->dummy_ad->paddr);
 	out_be32(&dr.diu_reg->desc[2], machine_data->dummy_ad->paddr);
 
diff --git a/drivers/video/jz4740_fb.c b/drivers/video/jz4740_fb.c
new file mode 100644
index 00000000000..670ecaa0385
--- /dev/null
+++ b/drivers/video/jz4740_fb.c
@@ -0,0 +1,847 @@
+/*
+ *  Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *	JZ4740 SoC LCD framebuffer driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of  the GNU General Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <linux/console.h>
+#include <linux/fb.h>
+
+#include <linux/dma-mapping.h>
+
+#include <asm/mach-jz4740/jz4740_fb.h>
+#include <asm/mach-jz4740/gpio.h>
+
+#define JZ_REG_LCD_CFG		0x00
+#define JZ_REG_LCD_VSYNC	0x04
+#define JZ_REG_LCD_HSYNC	0x08
+#define JZ_REG_LCD_VAT		0x0C
+#define JZ_REG_LCD_DAH		0x10
+#define JZ_REG_LCD_DAV		0x14
+#define JZ_REG_LCD_PS		0x18
+#define JZ_REG_LCD_CLS		0x1C
+#define JZ_REG_LCD_SPL		0x20
+#define JZ_REG_LCD_REV		0x24
+#define JZ_REG_LCD_CTRL		0x30
+#define JZ_REG_LCD_STATE	0x34
+#define JZ_REG_LCD_IID		0x38
+#define JZ_REG_LCD_DA0		0x40
+#define JZ_REG_LCD_SA0		0x44
+#define JZ_REG_LCD_FID0		0x48
+#define JZ_REG_LCD_CMD0		0x4C
+#define JZ_REG_LCD_DA1		0x50
+#define JZ_REG_LCD_SA1		0x54
+#define JZ_REG_LCD_FID1		0x58
+#define JZ_REG_LCD_CMD1		0x5C
+
+#define JZ_LCD_CFG_SLCD			BIT(31)
+#define JZ_LCD_CFG_PS_DISABLE		BIT(23)
+#define JZ_LCD_CFG_CLS_DISABLE		BIT(22)
+#define JZ_LCD_CFG_SPL_DISABLE		BIT(21)
+#define JZ_LCD_CFG_REV_DISABLE		BIT(20)
+#define JZ_LCD_CFG_HSYNCM		BIT(19)
+#define JZ_LCD_CFG_PCLKM		BIT(18)
+#define JZ_LCD_CFG_INV			BIT(17)
+#define JZ_LCD_CFG_SYNC_DIR		BIT(16)
+#define JZ_LCD_CFG_PS_POLARITY		BIT(15)
+#define JZ_LCD_CFG_CLS_POLARITY		BIT(14)
+#define JZ_LCD_CFG_SPL_POLARITY		BIT(13)
+#define JZ_LCD_CFG_REV_POLARITY		BIT(12)
+#define JZ_LCD_CFG_HSYNC_ACTIVE_LOW	BIT(11)
+#define JZ_LCD_CFG_PCLK_FALLING_EDGE	BIT(10)
+#define JZ_LCD_CFG_DE_ACTIVE_LOW	BIT(9)
+#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW	BIT(8)
+#define JZ_LCD_CFG_18_BIT		BIT(7)
+#define JZ_LCD_CFG_PDW			(BIT(5) | BIT(4))
+#define JZ_LCD_CFG_MODE_MASK 0xf
+
+#define JZ_LCD_CTRL_BURST_4		(0x0 << 28)
+#define JZ_LCD_CTRL_BURST_8		(0x1 << 28)
+#define JZ_LCD_CTRL_BURST_16		(0x2 << 28)
+#define JZ_LCD_CTRL_RGB555		BIT(27)
+#define JZ_LCD_CTRL_OFUP		BIT(26)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_16	(0x0 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_4	(0x1 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_2	(0x2 << 24)
+#define JZ_LCD_CTRL_PDD_MASK		(0xff << 16)
+#define JZ_LCD_CTRL_EOF_IRQ		BIT(13)
+#define JZ_LCD_CTRL_SOF_IRQ		BIT(12)
+#define JZ_LCD_CTRL_OFU_IRQ		BIT(11)
+#define JZ_LCD_CTRL_IFU0_IRQ		BIT(10)
+#define JZ_LCD_CTRL_IFU1_IRQ		BIT(9)
+#define JZ_LCD_CTRL_DD_IRQ		BIT(8)
+#define JZ_LCD_CTRL_QDD_IRQ		BIT(7)
+#define JZ_LCD_CTRL_REVERSE_ENDIAN	BIT(6)
+#define JZ_LCD_CTRL_LSB_FISRT		BIT(5)
+#define JZ_LCD_CTRL_DISABLE		BIT(4)
+#define JZ_LCD_CTRL_ENABLE		BIT(3)
+#define JZ_LCD_CTRL_BPP_1		0x0
+#define JZ_LCD_CTRL_BPP_2		0x1
+#define JZ_LCD_CTRL_BPP_4		0x2
+#define JZ_LCD_CTRL_BPP_8		0x3
+#define JZ_LCD_CTRL_BPP_15_16		0x4
+#define JZ_LCD_CTRL_BPP_18_24		0x5
+
+#define JZ_LCD_CMD_SOF_IRQ BIT(15)
+#define JZ_LCD_CMD_EOF_IRQ BIT(16)
+#define JZ_LCD_CMD_ENABLE_PAL BIT(12)
+
+#define JZ_LCD_SYNC_MASK 0x3ff
+
+#define JZ_LCD_STATE_DISABLED BIT(0)
+
+struct jzfb_framedesc {
+	uint32_t next;
+	uint32_t addr;
+	uint32_t id;
+	uint32_t cmd;
+} __packed;
+
+struct jzfb {
+	struct fb_info *fb;
+	struct platform_device *pdev;
+	void __iomem *base;
+	struct resource *mem;
+	struct jz4740_fb_platform_data *pdata;
+
+	size_t vidmem_size;
+	void *vidmem;
+	dma_addr_t vidmem_phys;
+	struct jzfb_framedesc *framedesc;
+	dma_addr_t framedesc_phys;
+
+	struct clk *ldclk;
+	struct clk *lpclk;
+
+	unsigned is_enabled:1;
+	struct mutex lock;
+
+	uint32_t pseudo_palette[16];
+};
+
+static const struct fb_fix_screeninfo jzfb_fix __devinitdata = {
+	.id		= "JZ4740 FB",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static const struct jz_gpio_bulk_request jz_lcd_ctrl_pins[] = {
+	JZ_GPIO_BULK_PIN(LCD_PCLK),
+	JZ_GPIO_BULK_PIN(LCD_HSYNC),
+	JZ_GPIO_BULK_PIN(LCD_VSYNC),
+	JZ_GPIO_BULK_PIN(LCD_DE),
+	JZ_GPIO_BULK_PIN(LCD_PS),
+	JZ_GPIO_BULK_PIN(LCD_REV),
+	JZ_GPIO_BULK_PIN(LCD_CLS),
+	JZ_GPIO_BULK_PIN(LCD_SPL),
+};
+
+static const struct jz_gpio_bulk_request jz_lcd_data_pins[] = {
+	JZ_GPIO_BULK_PIN(LCD_DATA0),
+	JZ_GPIO_BULK_PIN(LCD_DATA1),
+	JZ_GPIO_BULK_PIN(LCD_DATA2),
+	JZ_GPIO_BULK_PIN(LCD_DATA3),
+	JZ_GPIO_BULK_PIN(LCD_DATA4),
+	JZ_GPIO_BULK_PIN(LCD_DATA5),
+	JZ_GPIO_BULK_PIN(LCD_DATA6),
+	JZ_GPIO_BULK_PIN(LCD_DATA7),
+	JZ_GPIO_BULK_PIN(LCD_DATA8),
+	JZ_GPIO_BULK_PIN(LCD_DATA9),
+	JZ_GPIO_BULK_PIN(LCD_DATA10),
+	JZ_GPIO_BULK_PIN(LCD_DATA11),
+	JZ_GPIO_BULK_PIN(LCD_DATA12),
+	JZ_GPIO_BULK_PIN(LCD_DATA13),
+	JZ_GPIO_BULK_PIN(LCD_DATA14),
+	JZ_GPIO_BULK_PIN(LCD_DATA15),
+	JZ_GPIO_BULK_PIN(LCD_DATA16),
+	JZ_GPIO_BULK_PIN(LCD_DATA17),
+};
+
+static unsigned int jzfb_num_ctrl_pins(struct jzfb *jzfb)
+{
+	unsigned int num;
+
+	switch (jzfb->pdata->lcd_type) {
+	case JZ_LCD_TYPE_GENERIC_16_BIT:
+		num = 4;
+		break;
+	case JZ_LCD_TYPE_GENERIC_18_BIT:
+		num = 4;
+		break;
+	case JZ_LCD_TYPE_8BIT_SERIAL:
+		num = 3;
+		break;
+	case JZ_LCD_TYPE_SPECIAL_TFT_1:
+	case JZ_LCD_TYPE_SPECIAL_TFT_2:
+	case JZ_LCD_TYPE_SPECIAL_TFT_3:
+		num = 8;
+		break;
+	default:
+		num = 0;
+		break;
+	}
+	return num;
+}
+
+static unsigned int jzfb_num_data_pins(struct jzfb *jzfb)
+{
+	unsigned int num;
+
+	switch (jzfb->pdata->lcd_type) {
+	case JZ_LCD_TYPE_GENERIC_16_BIT:
+		num = 16;
+		break;
+	case JZ_LCD_TYPE_GENERIC_18_BIT:
+		num = 18;
+		break;
+	case JZ_LCD_TYPE_8BIT_SERIAL:
+		num = 8;
+		break;
+	case JZ_LCD_TYPE_SPECIAL_TFT_1:
+	case JZ_LCD_TYPE_SPECIAL_TFT_2:
+	case JZ_LCD_TYPE_SPECIAL_TFT_3:
+		if (jzfb->pdata->bpp == 18)
+			num = 18;
+		else
+			num = 16;
+		break;
+	default:
+		num = 0;
+		break;
+	}
+	return num;
+}
+
+/* Based on CNVT_TOHW macro from skeletonfb.c */
+static inline uint32_t jzfb_convert_color_to_hw(unsigned val,
+	struct fb_bitfield *bf)
+{
+	return (((val << bf->length) + 0x7FFF - val) >> 16) << bf->offset;
+}
+
+static int jzfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			unsigned blue, unsigned transp, struct fb_info *fb)
+{
+	uint32_t color;
+
+	if (regno >= 16)
+		return -EINVAL;
+
+	color = jzfb_convert_color_to_hw(red, &fb->var.red);
+	color |= jzfb_convert_color_to_hw(green, &fb->var.green);
+	color |= jzfb_convert_color_to_hw(blue, &fb->var.blue);
+	color |= jzfb_convert_color_to_hw(transp, &fb->var.transp);
+
+	((uint32_t *)(fb->pseudo_palette))[regno] = color;
+
+	return 0;
+}
+
+static int jzfb_get_controller_bpp(struct jzfb *jzfb)
+{
+	switch (jzfb->pdata->bpp) {
+	case 18:
+	case 24:
+		return 32;
+	case 15:
+		return 16;
+	default:
+		return jzfb->pdata->bpp;
+	}
+}
+
+static struct fb_videomode *jzfb_get_mode(struct jzfb *jzfb,
+	struct fb_var_screeninfo *var)
+{
+	size_t i;
+	struct fb_videomode *mode = jzfb->pdata->modes;
+
+	for (i = 0; i < jzfb->pdata->num_modes; ++i, ++mode) {
+		if (mode->xres == var->xres && mode->yres == var->yres)
+			return mode;
+	}
+
+	return NULL;
+}
+
+static int jzfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fb)
+{
+	struct jzfb *jzfb = fb->par;
+	struct fb_videomode *mode;
+
+	if (var->bits_per_pixel != jzfb_get_controller_bpp(jzfb) &&
+		var->bits_per_pixel != jzfb->pdata->bpp)
+		return -EINVAL;
+
+	mode = jzfb_get_mode(jzfb, var);
+	if (mode == NULL)
+		return -EINVAL;
+
+	fb_videomode_to_var(var, mode);
+
+	switch (jzfb->pdata->bpp) {
+	case 8:
+		break;
+	case 15:
+		var->red.offset = 10;
+		var->red.length = 5;
+		var->green.offset = 6;
+		var->green.length = 5;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		break;
+	case 16:
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 5;
+		break;
+	case 18:
+		var->red.offset = 16;
+		var->red.length = 6;
+		var->green.offset = 8;
+		var->green.length = 6;
+		var->blue.offset = 0;
+		var->blue.length = 6;
+		var->bits_per_pixel = 32;
+		break;
+	case 32:
+	case 24:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->bits_per_pixel = 32;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int jzfb_set_par(struct fb_info *info)
+{
+	struct jzfb *jzfb = info->par;
+	struct jz4740_fb_platform_data *pdata = jzfb->pdata;
+	struct fb_var_screeninfo *var = &info->var;
+	struct fb_videomode *mode;
+	uint16_t hds, vds;
+	uint16_t hde, vde;
+	uint16_t ht, vt;
+	uint32_t ctrl;
+	uint32_t cfg;
+	unsigned long rate;
+
+	mode = jzfb_get_mode(jzfb, var);
+	if (mode == NULL)
+		return -EINVAL;
+
+	if (mode == info->mode)
+		return 0;
+
+	info->mode = mode;
+
+	hds = mode->hsync_len + mode->left_margin;
+	hde = hds + mode->xres;
+	ht = hde + mode->right_margin;
+
+	vds = mode->vsync_len + mode->upper_margin;
+	vde = vds + mode->yres;
+	vt = vde + mode->lower_margin;
+
+	ctrl = JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16;
+
+	switch (pdata->bpp) {
+	case 1:
+		ctrl |= JZ_LCD_CTRL_BPP_1;
+		break;
+	case 2:
+		ctrl |= JZ_LCD_CTRL_BPP_2;
+		break;
+	case 4:
+		ctrl |= JZ_LCD_CTRL_BPP_4;
+		break;
+	case 8:
+		ctrl |= JZ_LCD_CTRL_BPP_8;
+	break;
+	case 15:
+		ctrl |= JZ_LCD_CTRL_RGB555; /* Falltrough */
+	case 16:
+		ctrl |= JZ_LCD_CTRL_BPP_15_16;
+		break;
+	case 18:
+	case 24:
+	case 32:
+		ctrl |= JZ_LCD_CTRL_BPP_18_24;
+		break;
+	default:
+		break;
+	}
+
+	cfg = pdata->lcd_type & 0xf;
+
+	if (!(mode->sync & FB_SYNC_HOR_HIGH_ACT))
+		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
+
+	if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
+		cfg |= JZ_LCD_CFG_VSYNC_ACTIVE_LOW;
+
+	if (pdata->pixclk_falling_edge)
+		cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE;
+
+	if (pdata->date_enable_active_low)
+		cfg |= JZ_LCD_CFG_DE_ACTIVE_LOW;
+
+	if (pdata->lcd_type == JZ_LCD_TYPE_GENERIC_18_BIT)
+		cfg |= JZ_LCD_CFG_18_BIT;
+
+	if (mode->pixclock) {
+		rate = PICOS2KHZ(mode->pixclock) * 1000;
+		mode->refresh = rate / vt / ht;
+	} else {
+		if (pdata->lcd_type == JZ_LCD_TYPE_8BIT_SERIAL)
+			rate = mode->refresh * (vt + 2 * mode->xres) * ht;
+		else
+			rate = mode->refresh * vt * ht;
+
+		mode->pixclock = KHZ2PICOS(rate / 1000);
+	}
+
+	mutex_lock(&jzfb->lock);
+	if (!jzfb->is_enabled)
+		clk_enable(jzfb->ldclk);
+	else
+		ctrl |= JZ_LCD_CTRL_ENABLE;
+
+	switch (pdata->lcd_type) {
+	case JZ_LCD_TYPE_SPECIAL_TFT_1:
+	case JZ_LCD_TYPE_SPECIAL_TFT_2:
+	case JZ_LCD_TYPE_SPECIAL_TFT_3:
+		writel(pdata->special_tft_config.spl, jzfb->base + JZ_REG_LCD_SPL);
+		writel(pdata->special_tft_config.cls, jzfb->base + JZ_REG_LCD_CLS);
+		writel(pdata->special_tft_config.ps, jzfb->base + JZ_REG_LCD_PS);
+		writel(pdata->special_tft_config.ps, jzfb->base + JZ_REG_LCD_REV);
+		break;
+	default:
+		cfg |= JZ_LCD_CFG_PS_DISABLE;
+		cfg |= JZ_LCD_CFG_CLS_DISABLE;
+		cfg |= JZ_LCD_CFG_SPL_DISABLE;
+		cfg |= JZ_LCD_CFG_REV_DISABLE;
+		break;
+	}
+
+	writel(mode->hsync_len, jzfb->base + JZ_REG_LCD_HSYNC);
+	writel(mode->vsync_len, jzfb->base + JZ_REG_LCD_VSYNC);
+
+	writel((ht << 16) | vt, jzfb->base + JZ_REG_LCD_VAT);
+
+	writel((hds << 16) | hde, jzfb->base + JZ_REG_LCD_DAH);
+	writel((vds << 16) | vde, jzfb->base + JZ_REG_LCD_DAV);
+
+	writel(cfg, jzfb->base + JZ_REG_LCD_CFG);
+
+	writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
+
+	if (!jzfb->is_enabled)
+		clk_disable(jzfb->ldclk);
+
+	mutex_unlock(&jzfb->lock);
+
+	clk_set_rate(jzfb->lpclk, rate);
+	clk_set_rate(jzfb->ldclk, rate * 3);
+
+	return 0;
+}
+
+static void jzfb_enable(struct jzfb *jzfb)
+{
+	uint32_t ctrl;
+
+	clk_enable(jzfb->ldclk);
+
+	jz_gpio_bulk_resume(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
+	jz_gpio_bulk_resume(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+
+	writel(0, jzfb->base + JZ_REG_LCD_STATE);
+
+	writel(jzfb->framedesc->next, jzfb->base + JZ_REG_LCD_DA0);
+
+	ctrl = readl(jzfb->base + JZ_REG_LCD_CTRL);
+	ctrl |= JZ_LCD_CTRL_ENABLE;
+	ctrl &= ~JZ_LCD_CTRL_DISABLE;
+	writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
+}
+
+static void jzfb_disable(struct jzfb *jzfb)
+{
+	uint32_t ctrl;
+
+	ctrl = readl(jzfb->base + JZ_REG_LCD_CTRL);
+	ctrl |= JZ_LCD_CTRL_DISABLE;
+	writel(ctrl, jzfb->base + JZ_REG_LCD_CTRL);
+	do {
+		ctrl = readl(jzfb->base + JZ_REG_LCD_STATE);
+	} while (!(ctrl & JZ_LCD_STATE_DISABLED));
+
+	jz_gpio_bulk_suspend(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
+	jz_gpio_bulk_suspend(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+
+	clk_disable(jzfb->ldclk);
+}
+
+static int jzfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct jzfb *jzfb = info->par;
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+		mutex_lock(&jzfb->lock);
+		if (jzfb->is_enabled) {
+			mutex_unlock(&jzfb->lock);
+			return 0;
+		}
+
+		jzfb_enable(jzfb);
+		jzfb->is_enabled = 1;
+
+		mutex_unlock(&jzfb->lock);
+		break;
+	default:
+		mutex_lock(&jzfb->lock);
+		if (!jzfb->is_enabled) {
+			mutex_unlock(&jzfb->lock);
+			return 0;
+		}
+
+		jzfb_disable(jzfb);
+		jzfb->is_enabled = 0;
+
+		mutex_unlock(&jzfb->lock);
+		break;
+	}
+
+	return 0;
+}
+
+static int jzfb_alloc_devmem(struct jzfb *jzfb)
+{
+	int max_videosize = 0;
+	struct fb_videomode *mode = jzfb->pdata->modes;
+	void *page;
+	int i;
+
+	for (i = 0; i < jzfb->pdata->num_modes; ++mode, ++i) {
+		if (max_videosize < mode->xres * mode->yres)
+			max_videosize = mode->xres * mode->yres;
+	}
+
+	max_videosize *= jzfb_get_controller_bpp(jzfb) >> 3;
+
+	jzfb->framedesc = dma_alloc_coherent(&jzfb->pdev->dev,
+					sizeof(*jzfb->framedesc),
+					&jzfb->framedesc_phys, GFP_KERNEL);
+
+	if (!jzfb->framedesc)
+		return -ENOMEM;
+
+	jzfb->vidmem_size = PAGE_ALIGN(max_videosize);
+	jzfb->vidmem = dma_alloc_coherent(&jzfb->pdev->dev,
+					jzfb->vidmem_size,
+					&jzfb->vidmem_phys, GFP_KERNEL);
+
+	if (!jzfb->vidmem)
+		goto err_free_framedesc;
+
+	for (page = jzfb->vidmem;
+		 page < jzfb->vidmem + PAGE_ALIGN(jzfb->vidmem_size);
+		 page += PAGE_SIZE) {
+		SetPageReserved(virt_to_page(page));
+	}
+
+	jzfb->framedesc->next = jzfb->framedesc_phys;
+	jzfb->framedesc->addr = jzfb->vidmem_phys;
+	jzfb->framedesc->id = 0xdeafbead;
+	jzfb->framedesc->cmd = 0;
+	jzfb->framedesc->cmd |= max_videosize / 4;
+
+	return 0;
+
+err_free_framedesc:
+	dma_free_coherent(&jzfb->pdev->dev, sizeof(*jzfb->framedesc),
+				jzfb->framedesc, jzfb->framedesc_phys);
+	return -ENOMEM;
+}
+
+static void jzfb_free_devmem(struct jzfb *jzfb)
+{
+	dma_free_coherent(&jzfb->pdev->dev, jzfb->vidmem_size,
+				jzfb->vidmem, jzfb->vidmem_phys);
+	dma_free_coherent(&jzfb->pdev->dev, sizeof(*jzfb->framedesc),
+				jzfb->framedesc, jzfb->framedesc_phys);
+}
+
+static struct  fb_ops jzfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = jzfb_check_var,
+	.fb_set_par = jzfb_set_par,
+	.fb_blank = jzfb_blank,
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+	.fb_imageblit	= sys_imageblit,
+	.fb_setcolreg = jzfb_setcolreg,
+};
+
+static int __devinit jzfb_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jzfb *jzfb;
+	struct fb_info *fb;
+	struct jz4740_fb_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *mem;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Missing platform data\n");
+		return -ENXIO;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "Failed to get register memory resource\n");
+		return -ENXIO;
+	}
+
+	mem = request_mem_region(mem->start, resource_size(mem), pdev->name);
+	if (!mem) {
+		dev_err(&pdev->dev, "Failed to request register memory region\n");
+		return -EBUSY;
+	}
+
+	fb = framebuffer_alloc(sizeof(struct jzfb), &pdev->dev);
+	if (!fb) {
+		dev_err(&pdev->dev, "Failed to allocate framebuffer device\n");
+		ret = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	fb->fbops = &jzfb_ops;
+	fb->flags = FBINFO_DEFAULT;
+
+	jzfb = fb->par;
+	jzfb->pdev = pdev;
+	jzfb->pdata = pdata;
+	jzfb->mem = mem;
+
+	jzfb->ldclk = clk_get(&pdev->dev, "lcd");
+	if (IS_ERR(jzfb->ldclk)) {
+		ret = PTR_ERR(jzfb->ldclk);
+		dev_err(&pdev->dev, "Failed to get lcd clock: %d\n", ret);
+		goto err_framebuffer_release;
+	}
+
+	jzfb->lpclk = clk_get(&pdev->dev, "lcd_pclk");
+	if (IS_ERR(jzfb->lpclk)) {
+		ret = PTR_ERR(jzfb->lpclk);
+		dev_err(&pdev->dev, "Failed to get lcd pixel clock: %d\n", ret);
+		goto err_put_ldclk;
+	}
+
+	jzfb->base = ioremap(mem->start, resource_size(mem));
+	if (!jzfb->base) {
+		dev_err(&pdev->dev, "Failed to ioremap register memory region\n");
+		ret = -EBUSY;
+		goto err_put_lpclk;
+	}
+
+	platform_set_drvdata(pdev, jzfb);
+
+	mutex_init(&jzfb->lock);
+
+	fb_videomode_to_modelist(pdata->modes, pdata->num_modes,
+				 &fb->modelist);
+	fb_videomode_to_var(&fb->var, pdata->modes);
+	fb->var.bits_per_pixel = pdata->bpp;
+	jzfb_check_var(&fb->var, fb);
+
+	ret = jzfb_alloc_devmem(jzfb);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate video memory\n");
+		goto err_iounmap;
+	}
+
+	fb->fix = jzfb_fix;
+	fb->fix.line_length = fb->var.bits_per_pixel * fb->var.xres / 8;
+	fb->fix.mmio_start = mem->start;
+	fb->fix.mmio_len = resource_size(mem);
+	fb->fix.smem_start = jzfb->vidmem_phys;
+	fb->fix.smem_len =  fb->fix.line_length * fb->var.yres;
+	fb->screen_base = jzfb->vidmem;
+	fb->pseudo_palette = jzfb->pseudo_palette;
+
+	fb_alloc_cmap(&fb->cmap, 256, 0);
+
+	clk_enable(jzfb->ldclk);
+	jzfb->is_enabled = 1;
+
+	writel(jzfb->framedesc->next, jzfb->base + JZ_REG_LCD_DA0);
+
+	fb->mode = NULL;
+	jzfb_set_par(fb);
+
+	jz_gpio_bulk_request(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
+	jz_gpio_bulk_request(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+
+	ret = register_framebuffer(fb);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register framebuffer: %d\n", ret);
+		goto err_free_devmem;
+	}
+
+	jzfb->fb = fb;
+
+	return 0;
+
+err_free_devmem:
+	jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
+	jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+
+	fb_dealloc_cmap(&fb->cmap);
+	jzfb_free_devmem(jzfb);
+err_iounmap:
+	iounmap(jzfb->base);
+err_put_lpclk:
+	clk_put(jzfb->lpclk);
+err_put_ldclk:
+	clk_put(jzfb->ldclk);
+err_framebuffer_release:
+	framebuffer_release(fb);
+err_release_mem_region:
+	release_mem_region(mem->start, resource_size(mem));
+	return ret;
+}
+
+static int __devexit jzfb_remove(struct platform_device *pdev)
+{
+	struct jzfb *jzfb = platform_get_drvdata(pdev);
+
+	jzfb_blank(FB_BLANK_POWERDOWN, jzfb->fb);
+
+	jz_gpio_bulk_free(jz_lcd_ctrl_pins, jzfb_num_ctrl_pins(jzfb));
+	jz_gpio_bulk_free(jz_lcd_data_pins, jzfb_num_data_pins(jzfb));
+
+	iounmap(jzfb->base);
+	release_mem_region(jzfb->mem->start, resource_size(jzfb->mem));
+
+	fb_dealloc_cmap(&jzfb->fb->cmap);
+	jzfb_free_devmem(jzfb);
+
+	platform_set_drvdata(pdev, NULL);
+
+	clk_put(jzfb->lpclk);
+	clk_put(jzfb->ldclk);
+
+	framebuffer_release(jzfb->fb);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int jzfb_suspend(struct device *dev)
+{
+	struct jzfb *jzfb = dev_get_drvdata(dev);
+
+	acquire_console_sem();
+	fb_set_suspend(jzfb->fb, 1);
+	release_console_sem();
+
+	mutex_lock(&jzfb->lock);
+	if (jzfb->is_enabled)
+		jzfb_disable(jzfb);
+	mutex_unlock(&jzfb->lock);
+
+	return 0;
+}
+
+static int jzfb_resume(struct device *dev)
+{
+	struct jzfb *jzfb = dev_get_drvdata(dev);
+	clk_enable(jzfb->ldclk);
+
+	mutex_lock(&jzfb->lock);
+	if (jzfb->is_enabled)
+		jzfb_enable(jzfb);
+	mutex_unlock(&jzfb->lock);
+
+	acquire_console_sem();
+	fb_set_suspend(jzfb->fb, 0);
+	release_console_sem();
+
+	return 0;
+}
+
+static const struct dev_pm_ops jzfb_pm_ops = {
+	.suspend	= jzfb_suspend,
+	.resume		= jzfb_resume,
+	.poweroff	= jzfb_suspend,
+	.restore	= jzfb_resume,
+};
+
+#define JZFB_PM_OPS (&jzfb_pm_ops)
+
+#else
+#define JZFB_PM_OPS NULL
+#endif
+
+static struct platform_driver jzfb_driver = {
+	.probe = jzfb_probe,
+	.remove = __devexit_p(jzfb_remove),
+	.driver = {
+		.name = "jz4740-fb",
+		.pm = JZFB_PM_OPS,
+	},
+};
+
+static int __init jzfb_init(void)
+{
+	return platform_driver_register(&jzfb_driver);
+}
+module_init(jzfb_init);
+
+static void __exit jzfb_exit(void)
+{
+	platform_driver_unregister(&jzfb_driver);
+}
+module_exit(jzfb_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("JZ4740 SoC LCD framebuffer driver");
+MODULE_ALIAS("platform:jz4740-fb");
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 9e8bf7d5e24..ad677637ffb 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -677,12 +677,12 @@ static int __init leo_init(void)
 	if (fb_get_options("leofb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&leo_driver, &of_bus_type);
+	return of_register_platform_driver(&leo_driver);
 }
 
 static void __exit leo_exit(void)
 {
-	of_unregister_driver(&leo_driver);
+	of_unregister_platform_driver(&leo_driver);
 }
 
 module_init(leo_init);
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 46dda7d8aae..cb163a5397b 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -19,13 +19,14 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
 #include <asm/io.h>
-#include <asm/prom.h>
 
 #ifdef CONFIG_PPC64
 #include <asm/pci-bridge.h>
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 2be94eb3bbf..10459d8bd9a 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 
 #include "omapfb.h"
 
@@ -34,8 +33,6 @@
 static int apollon_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
 {
-	/* configure LCD PWR_EN */
-	omap_cfg_reg(M21_242X_GPIO11);
 	return 0;
 }
 
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index aaf5d308a04..e1c765d1141 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -28,12 +28,13 @@
 #include <linux/fb.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
-#include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 
 #include <plat/display.h>
+#include <plat/nokia-dsi-panel.h>
 
 /* DSI Virtual channel. Hardcoded for now. */
 #define TCH 0
@@ -62,11 +63,136 @@
 #define DCS_GET_ID2		0xdb
 #define DCS_GET_ID3		0xdc
 
-/* #define TAAL_USE_ESD_CHECK */
 #define TAAL_ESD_CHECK_PERIOD	msecs_to_jiffies(5000)
 
+static irqreturn_t taal_te_isr(int irq, void *data);
+static void taal_te_timeout_work_callback(struct work_struct *work);
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
 
+struct panel_regulator {
+	struct regulator *regulator;
+	const char *name;
+	int min_uV;
+	int max_uV;
+};
+
+static void free_regulators(struct panel_regulator *regulators, int n)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		/* disable/put in reverse order */
+		regulator_disable(regulators[n - i - 1].regulator);
+		regulator_put(regulators[n - i - 1].regulator);
+	}
+}
+
+static int init_regulators(struct omap_dss_device *dssdev,
+			struct panel_regulator *regulators, int n)
+{
+	int r, i, v;
+
+	for (i = 0; i < n; i++) {
+		struct regulator *reg;
+
+		reg = regulator_get(&dssdev->dev, regulators[i].name);
+		if (IS_ERR(reg)) {
+			dev_err(&dssdev->dev, "failed to get regulator %s\n",
+				regulators[i].name);
+			r = PTR_ERR(reg);
+			goto err;
+		}
+
+		/* FIXME: better handling of fixed vs. variable regulators */
+		v = regulator_get_voltage(reg);
+		if (v < regulators[i].min_uV || v > regulators[i].max_uV) {
+			r = regulator_set_voltage(reg, regulators[i].min_uV,
+						regulators[i].max_uV);
+			if (r) {
+				dev_err(&dssdev->dev,
+					"failed to set regulator %s voltage\n",
+					regulators[i].name);
+				regulator_put(reg);
+				goto err;
+			}
+		}
+
+		r = regulator_enable(reg);
+		if (r) {
+			dev_err(&dssdev->dev, "failed to enable regulator %s\n",
+				regulators[i].name);
+			regulator_put(reg);
+			goto err;
+		}
+
+		regulators[i].regulator = reg;
+	}
+
+	return 0;
+
+err:
+	free_regulators(regulators, i);
+
+	return r;
+}
+
+/**
+ * struct panel_config - panel configuration
+ * @name: panel name
+ * @type: panel type
+ * @timings: panel resolution
+ * @sleep: various panel specific delays, passed to msleep() if non-zero
+ * @reset_sequence: reset sequence timings, passed to udelay() if non-zero
+ * @regulators: array of panel regulators
+ * @num_regulators: number of regulators in the array
+ */
+struct panel_config {
+	const char *name;
+	int type;
+
+	struct omap_video_timings timings;
+
+	struct {
+		unsigned int sleep_in;
+		unsigned int sleep_out;
+		unsigned int hw_reset;
+		unsigned int enable_te;
+	} sleep;
+
+	struct {
+		unsigned int high;
+		unsigned int low;
+	} reset_sequence;
+
+	struct panel_regulator *regulators;
+	int num_regulators;
+};
+
+enum {
+	PANEL_TAAL,
+};
+
+static struct panel_config panel_configs[] = {
+	{
+		.name		= "taal",
+		.type		= PANEL_TAAL,
+		.timings	= {
+			.x_res		= 864,
+			.y_res		= 480,
+		},
+		.sleep		= {
+			.sleep_in	= 5,
+			.sleep_out	= 5,
+			.hw_reset	= 5,
+			.enable_te	= 100, /* possible panel bug */
+		},
+		.reset_sequence	= {
+			.high		= 10,
+			.low		= 10,
+		},
+	},
+};
+
 struct taal_data {
 	struct mutex lock;
 
@@ -84,8 +210,15 @@ struct taal_data {
 	bool mirror;
 
 	bool te_enabled;
-	bool use_ext_te;
-	struct completion te_completion;
+
+	atomic_t do_update;
+	struct {
+		u16 x;
+		u16 y;
+		u16 w;
+		u16 h;
+	} update_region;
+	struct delayed_work te_timeout_work;
 
 	bool use_dsi_bl;
 
@@ -96,8 +229,16 @@ struct taal_data {
 
 	struct workqueue_struct *esd_wq;
 	struct delayed_work esd_work;
+
+	struct panel_config *panel_config;
 };
 
+static inline struct nokia_dsi_panel_data
+*get_panel_data(const struct omap_dss_device *dssdev)
+{
+	return (struct nokia_dsi_panel_data *) dssdev->data;
+}
+
 static void taal_esd_work(struct work_struct *work);
 
 static void hw_guard_start(struct taal_data *td, int guard_msec)
@@ -159,7 +300,8 @@ static int taal_sleep_in(struct taal_data *td)
 
 	hw_guard_start(td, 120);
 
-	msleep(5);
+	if (td->panel_config->sleep.sleep_in)
+		msleep(td->panel_config->sleep.sleep_in);
 
 	return 0;
 }
@@ -176,7 +318,8 @@ static int taal_sleep_out(struct taal_data *td)
 
 	hw_guard_start(td, 120);
 
-	msleep(5);
+	if (td->panel_config->sleep.sleep_out)
+		msleep(td->panel_config->sleep.sleep_out);
 
 	return 0;
 }
@@ -279,6 +422,7 @@ static int taal_bl_update_status(struct backlight_device *dev)
 {
 	struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 	int level;
 
@@ -290,24 +434,26 @@ static int taal_bl_update_status(struct backlight_device *dev)
 
 	dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
 
+	mutex_lock(&td->lock);
+
 	if (td->use_dsi_bl) {
 		if (td->enabled) {
 			dsi_bus_lock();
 			r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
 			dsi_bus_unlock();
-			if (r)
-				return r;
+		} else {
+			r = 0;
 		}
 	} else {
-		if (!dssdev->set_backlight)
-			return -EINVAL;
-
-		r = dssdev->set_backlight(dssdev, level);
-		if (r)
-			return r;
+		if (!panel_data->set_backlight)
+			r = -EINVAL;
+		else
+			r = panel_data->set_backlight(dssdev, level);
 	}
 
-	return 0;
+	mutex_unlock(&td->lock);
+
+	return r;
 }
 
 static int taal_bl_get_intensity(struct backlight_device *dev)
@@ -344,16 +490,6 @@ static void taal_get_resolution(struct omap_dss_device *dssdev,
 	}
 }
 
-static irqreturn_t taal_te_isr(int irq, void *data)
-{
-	struct omap_dss_device *dssdev = data;
-	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-
-	complete_all(&td->te_completion);
-
-	return IRQ_HANDLED;
-}
-
 static ssize_t taal_num_errors_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -362,6 +498,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
 	u8 errors;
 	int r;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
@@ -370,6 +508,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
 		r = -ENODEV;
 	}
 
+	mutex_unlock(&td->lock);
+
 	if (r)
 		return r;
 
@@ -384,6 +524,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
 	u8 id1, id2, id3;
 	int r;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		r = taal_get_id(&id1, &id2, &id3);
@@ -392,6 +534,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
 		r = -ENODEV;
 	}
 
+	mutex_unlock(&td->lock);
+
 	if (r)
 		return r;
 
@@ -441,6 +585,8 @@ static ssize_t store_cabc_mode(struct device *dev,
 	if (i == ARRAY_SIZE(cabc_modes))
 		return -EINVAL;
 
+	mutex_lock(&td->lock);
+
 	if (td->enabled) {
 		dsi_bus_lock();
 		if (!td->cabc_broken)
@@ -450,6 +596,8 @@ static ssize_t store_cabc_mode(struct device *dev,
 
 	td->cabc_mode = i;
 
+	mutex_unlock(&td->lock);
+
 	return count;
 }
 
@@ -488,47 +636,93 @@ static struct attribute_group taal_attr_group = {
 	.attrs = taal_attrs,
 };
 
+static void taal_hw_reset(struct omap_dss_device *dssdev)
+{
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+
+	if (panel_data->reset_gpio == -1)
+		return;
+
+	gpio_set_value(panel_data->reset_gpio, 1);
+	if (td->panel_config->reset_sequence.high)
+		udelay(td->panel_config->reset_sequence.high);
+	/* reset the panel */
+	gpio_set_value(panel_data->reset_gpio, 0);
+	/* assert reset */
+	if (td->panel_config->reset_sequence.low)
+		udelay(td->panel_config->reset_sequence.low);
+	gpio_set_value(panel_data->reset_gpio, 1);
+	/* wait after releasing reset */
+	if (td->panel_config->sleep.hw_reset)
+		msleep(td->panel_config->sleep.hw_reset);
+}
+
 static int taal_probe(struct omap_dss_device *dssdev)
 {
 	struct backlight_properties props;
 	struct taal_data *td;
 	struct backlight_device *bldev;
-	int r;
-
-	const struct omap_video_timings taal_panel_timings = {
-		.x_res		= 864,
-		.y_res		= 480,
-	};
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+	struct panel_config *panel_config = NULL;
+	int r, i;
 
 	dev_dbg(&dssdev->dev, "probe\n");
 
+	if (!panel_data || !panel_data->name) {
+		r = -EINVAL;
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
+		if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
+			panel_config = &panel_configs[i];
+			break;
+		}
+	}
+
+	if (!panel_config) {
+		r = -EINVAL;
+		goto err;
+	}
+
 	dssdev->panel.config = OMAP_DSS_LCD_TFT;
-	dssdev->panel.timings = taal_panel_timings;
+	dssdev->panel.timings = panel_config->timings;
 	dssdev->ctrl.pixel_size = 24;
 
 	td = kzalloc(sizeof(*td), GFP_KERNEL);
 	if (!td) {
 		r = -ENOMEM;
-		goto err0;
+		goto err;
 	}
 	td->dssdev = dssdev;
+	td->panel_config = panel_config;
 
 	mutex_init(&td->lock);
 
+	atomic_set(&td->do_update, 0);
+
+	r = init_regulators(dssdev, panel_config->regulators,
+			panel_config->num_regulators);
+	if (r)
+		goto err_reg;
+
 	td->esd_wq = create_singlethread_workqueue("taal_esd");
 	if (td->esd_wq == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
 		r = -ENOMEM;
-		goto err1;
+		goto err_wq;
 	}
 	INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
 
 	dev_set_drvdata(&dssdev->dev, td);
 
+	taal_hw_reset(dssdev);
+
 	/* if no platform set_backlight() defined, presume DSI backlight
 	 * control */
 	memset(&props, 0, sizeof(struct backlight_properties));
-	if (!dssdev->set_backlight)
+	if (!panel_data->set_backlight)
 		td->use_dsi_bl = true;
 
 	if (td->use_dsi_bl)
@@ -539,7 +733,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
 					  &taal_bl_ops, &props);
 	if (IS_ERR(bldev)) {
 		r = PTR_ERR(bldev);
-		goto err2;
+		goto err_bl;
 	}
 
 	td->bldev = bldev;
@@ -553,13 +747,13 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	taal_bl_update_status(bldev);
 
-	if (dssdev->phy.dsi.ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
+	if (panel_data->use_ext_te) {
+		int gpio = panel_data->ext_te_gpio;
 
 		r = gpio_request(gpio, "taal irq");
 		if (r) {
 			dev_err(&dssdev->dev, "GPIO request failed\n");
-			goto err3;
+			goto err_gpio;
 		}
 
 		gpio_direction_input(gpio);
@@ -571,49 +765,52 @@ static int taal_probe(struct omap_dss_device *dssdev)
 		if (r) {
 			dev_err(&dssdev->dev, "IRQ request failed\n");
 			gpio_free(gpio);
-			goto err3;
+			goto err_irq;
 		}
 
-		init_completion(&td->te_completion);
+		INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+					taal_te_timeout_work_callback);
 
-		td->use_ext_te = true;
+		dev_dbg(&dssdev->dev, "Using GPIO TE\n");
 	}
 
 	r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to create sysfs files\n");
-		goto err4;
+		goto err_sysfs;
 	}
 
 	return 0;
-err4:
-	if (td->use_ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
-		free_irq(gpio_to_irq(gpio), dssdev);
-		gpio_free(gpio);
-	}
-err3:
+err_sysfs:
+	if (panel_data->use_ext_te)
+		free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
+err_irq:
+	if (panel_data->use_ext_te)
+		gpio_free(panel_data->ext_te_gpio);
+err_gpio:
 	backlight_device_unregister(bldev);
-err2:
-	cancel_delayed_work_sync(&td->esd_work);
+err_bl:
 	destroy_workqueue(td->esd_wq);
-err1:
+err_wq:
+	free_regulators(panel_config->regulators, panel_config->num_regulators);
+err_reg:
 	kfree(td);
-err0:
+err:
 	return r;
 }
 
 static void taal_remove(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	struct backlight_device *bldev;
 
 	dev_dbg(&dssdev->dev, "remove\n");
 
 	sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
 
-	if (td->use_ext_te) {
-		int gpio = dssdev->phy.dsi.ext_te_gpio;
+	if (panel_data->use_ext_te) {
+		int gpio = panel_data->ext_te_gpio;
 		free_irq(gpio_to_irq(gpio), dssdev);
 		gpio_free(gpio);
 	}
@@ -623,9 +820,15 @@ static void taal_remove(struct omap_dss_device *dssdev)
 	taal_bl_update_status(bldev);
 	backlight_device_unregister(bldev);
 
-	cancel_delayed_work_sync(&td->esd_work);
+	cancel_delayed_work(&td->esd_work);
 	destroy_workqueue(td->esd_wq);
 
+	/* reset, to be sure that the panel is in a valid state */
+	taal_hw_reset(dssdev);
+
+	free_regulators(td->panel_config->regulators,
+			td->panel_config->num_regulators);
+
 	kfree(td);
 }
 
@@ -635,23 +838,14 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	u8 id1, id2, id3;
 	int r;
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			return r;
-	}
-
-	/* it seems we have to wait a bit until taal is ready */
-	msleep(5);
-
-	dsi_bus_lock();
-
 	r = omapdss_dsi_display_enable(dssdev);
 	if (r) {
 		dev_err(&dssdev->dev, "failed to enable DSI\n");
 		goto err0;
 	}
 
+	taal_hw_reset(dssdev);
+
 	omapdss_dsi_vc_enable_hs(TCH, false);
 
 	r = taal_sleep_out(td);
@@ -662,34 +856,47 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 	if (r)
 		goto err;
 
-	/* on early revisions CABC is broken */
-	if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+	/* on early Taal revisions CABC is broken */
+	if (td->panel_config->type == PANEL_TAAL &&
+		(id2 == 0x00 || id2 == 0xff || id2 == 0x81))
 		td->cabc_broken = true;
 
-	taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
-	taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
+	r = taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(DCS_CTRL_DISPLAY,
+			(1<<2) | (1<<5));	/* BL | BCTRL */
+	if (r)
+		goto err;
+
+	r = taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+	if (r)
+		goto err;
 
-	taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+	r = taal_set_addr_mode(td->rotate, td->mirror);
+	if (r)
+		goto err;
 
-	taal_set_addr_mode(td->rotate, td->mirror);
-	if (!td->cabc_broken)
-		taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+	if (!td->cabc_broken) {
+		r = taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+		if (r)
+			goto err;
+	}
 
-	taal_dcs_write_0(DCS_DISPLAY_ON);
+	r = taal_dcs_write_0(DCS_DISPLAY_ON);
+	if (r)
+		goto err;
 
 	r = _taal_enable_te(dssdev, td->te_enabled);
 	if (r)
 		goto err;
 
-#ifdef TAAL_USE_ESD_CHECK
-	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
-#endif
-
 	td->enabled = 1;
 
 	if (!td->intro_printed) {
-		dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
-				id1, id2, id3);
+		dev_info(&dssdev->dev, "%s panel revision %02x.%02x.%02x\n",
+			td->panel_config->name, id1, id2, id3);
 		if (td->cabc_broken)
 			dev_info(&dssdev->dev,
 					"old Taal version, CABC disabled\n");
@@ -698,46 +905,44 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 
 	omapdss_dsi_vc_enable_hs(TCH, true);
 
-	dsi_bus_unlock();
-
 	return 0;
 err:
+	dev_err(&dssdev->dev, "error while enabling panel, issuing HW reset\n");
+
+	taal_hw_reset(dssdev);
+
 	omapdss_dsi_display_disable(dssdev);
 err0:
-	dsi_bus_unlock();
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	return r;
 }
 
 static void taal_power_off(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
 
-	dsi_bus_lock();
-
-	cancel_delayed_work(&td->esd_work);
-
-	taal_dcs_write_0(DCS_DISPLAY_OFF);
-	taal_sleep_in(td);
+	r = taal_dcs_write_0(DCS_DISPLAY_OFF);
+	if (!r) {
+		r = taal_sleep_in(td);
+		/* HACK: wait a bit so that the message goes through */
+		msleep(10);
+	}
 
-	/* wait a bit so that the message goes through */
-	msleep(10);
+	if (r) {
+		dev_err(&dssdev->dev,
+				"error disabling panel, issuing HW reset\n");
+		taal_hw_reset(dssdev);
+	}
 
 	omapdss_dsi_display_disable(dssdev);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	td->enabled = 0;
-
-	dsi_bus_unlock();
 }
 
 static int taal_enable(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "enable\n");
@@ -749,10 +954,19 @@ static int taal_enable(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	dsi_bus_lock();
+
 	r = taal_power_on(dssdev);
+
+	dsi_bus_unlock();
+
 	if (r)
 		goto err;
 
+	if (panel_data->use_esd_check)
+		queue_delayed_work(td->esd_wq, &td->esd_work,
+				TAAL_ESD_CHECK_PERIOD);
+
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
 	mutex_unlock(&td->lock);
@@ -772,9 +986,15 @@ static void taal_disable(struct omap_dss_device *dssdev)
 
 	mutex_lock(&td->lock);
 
+	cancel_delayed_work(&td->esd_work);
+
+	dsi_bus_lock();
+
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		taal_power_off(dssdev);
 
+	dsi_bus_unlock();
+
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 
 	mutex_unlock(&td->lock);
@@ -794,7 +1014,14 @@ static int taal_suspend(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	cancel_delayed_work(&td->esd_work);
+
+	dsi_bus_lock();
+
 	taal_power_off(dssdev);
+
+	dsi_bus_unlock();
+
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
 	mutex_unlock(&td->lock);
@@ -808,6 +1035,7 @@ err:
 static int taal_resume(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "resume\n");
@@ -819,8 +1047,20 @@ static int taal_resume(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
+	dsi_bus_lock();
+
 	r = taal_power_on(dssdev);
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	dsi_bus_unlock();
+
+	if (r) {
+		dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+	} else {
+		dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+		if (panel_data->use_esd_check)
+			queue_delayed_work(td->esd_wq, &td->esd_work,
+					TAAL_ESD_CHECK_PERIOD);
+	}
 
 	mutex_unlock(&td->lock);
 
@@ -837,10 +1077,52 @@ static void taal_framedone_cb(int err, void *data)
 	dsi_bus_unlock();
 }
 
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+	struct omap_dss_device *dssdev = data;
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int old;
+	int r;
+
+	old = atomic_cmpxchg(&td->do_update, 1, 0);
+
+	if (old) {
+		cancel_delayed_work(&td->te_timeout_work);
+
+		r = omap_dsi_update(dssdev, TCH,
+				td->update_region.x,
+				td->update_region.y,
+				td->update_region.w,
+				td->update_region.h,
+				taal_framedone_cb, dssdev);
+		if (r)
+			goto err;
+	}
+
+	return IRQ_HANDLED;
+err:
+	dev_err(&dssdev->dev, "start update failed\n");
+	dsi_bus_unlock();
+	return IRQ_HANDLED;
+}
+
+static void taal_te_timeout_work_callback(struct work_struct *work)
+{
+	struct taal_data *td = container_of(work, struct taal_data,
+					te_timeout_work.work);
+	struct omap_dss_device *dssdev = td->dssdev;
+
+	dev_err(&dssdev->dev, "TE not received for 250ms!\n");
+
+	atomic_set(&td->do_update, 0);
+	dsi_bus_unlock();
+}
+
 static int taal_update(struct omap_dss_device *dssdev,
 				    u16 x, u16 y, u16 w, u16 h)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
 	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -853,7 +1135,7 @@ static int taal_update(struct omap_dss_device *dssdev,
 		goto err;
 	}
 
-	r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+	r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h, true);
 	if (r)
 		goto err;
 
@@ -861,10 +1143,21 @@ static int taal_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	r = omap_dsi_update(dssdev, TCH, x, y, w, h,
-			taal_framedone_cb, dssdev);
-	if (r)
-		goto err;
+	if (td->te_enabled && panel_data->use_ext_te) {
+		td->update_region.x = x;
+		td->update_region.y = y;
+		td->update_region.w = w;
+		td->update_region.h = h;
+		barrier();
+		schedule_delayed_work(&td->te_timeout_work,
+				msecs_to_jiffies(250));
+		atomic_set(&td->do_update, 1);
+	} else {
+		r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+				taal_framedone_cb, dssdev);
+		if (r)
+			goto err;
+	}
 
 	/* note: no bus_unlock here. unlock is in framedone_cb */
 	mutex_unlock(&td->lock);
@@ -894,20 +1187,19 @@ static int taal_sync(struct omap_dss_device *dssdev)
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	int r;
 
-	td->te_enabled = enable;
-
 	if (enable)
 		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
 	else
 		r = taal_dcs_write_0(DCS_TEAR_OFF);
 
-	omapdss_dsi_enable_te(dssdev, enable);
+	if (!panel_data->use_ext_te)
+		omapdss_dsi_enable_te(dssdev, enable);
 
-	/* XXX for some reason, DSI TE breaks if we don't wait here.
-	 * Panel bug? Needs more studying */
-	msleep(100);
+	if (td->panel_config->sleep.enable_te)
+		msleep(td->panel_config->sleep.enable_te);
 
 	return r;
 }
@@ -918,10 +1210,26 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 	int r;
 
 	mutex_lock(&td->lock);
+
+	if (td->te_enabled == enable)
+		goto end;
+
 	dsi_bus_lock();
 
-	r = _taal_enable_te(dssdev, enable);
+	if (td->enabled) {
+		r = _taal_enable_te(dssdev, enable);
+		if (r)
+			goto err;
+	}
+
+	td->te_enabled = enable;
+
+	dsi_bus_unlock();
+end:
+	mutex_unlock(&td->lock);
 
+	return 0;
+err:
 	dsi_bus_unlock();
 	mutex_unlock(&td->lock);
 
@@ -948,6 +1256,10 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
 
 	mutex_lock(&td->lock);
+
+	if (td->rotate == rotate)
+		goto end;
+
 	dsi_bus_lock();
 
 	if (td->enabled) {
@@ -959,6 +1271,7 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 	td->rotate = rotate;
 
 	dsi_bus_unlock();
+end:
 	mutex_unlock(&td->lock);
 	return 0;
 err:
@@ -987,6 +1300,10 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
 
 	mutex_lock(&td->lock);
+
+	if (td->mirror == enable)
+		goto end;
+
 	dsi_bus_lock();
 	if (td->enabled) {
 		r = taal_set_addr_mode(td->rotate, enable);
@@ -997,6 +1314,7 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 	td->mirror = enable;
 
 	dsi_bus_unlock();
+end:
 	mutex_unlock(&td->lock);
 	return 0;
 err:
@@ -1024,23 +1342,30 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 	int r;
 
 	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
 	dsi_bus_lock();
 
 	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
 	if (r)
-		goto err;
+		goto err2;
 	r = taal_dcs_read_1(DCS_GET_ID2, &id2);
 	if (r)
-		goto err;
+		goto err2;
 	r = taal_dcs_read_1(DCS_GET_ID3, &id3);
 	if (r)
-		goto err;
+		goto err2;
 
 	dsi_bus_unlock();
 	mutex_unlock(&td->lock);
 	return 0;
-err:
+err2:
 	dsi_bus_unlock();
+err1:
 	mutex_unlock(&td->lock);
 	return r;
 }
@@ -1128,6 +1453,7 @@ static void taal_esd_work(struct work_struct *work)
 	struct taal_data *td = container_of(work, struct taal_data,
 			esd_work.work);
 	struct omap_dss_device *dssdev = td->dssdev;
+	struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
 	u8 state1, state2;
 	int r;
 
@@ -1168,7 +1494,7 @@ static void taal_esd_work(struct work_struct *work)
 	}
 	/* Self-diagnostics result is also shown on TE GPIO line. We need
 	 * to re-enable TE after self diagnostics */
-	if (td->use_ext_te && td->te_enabled) {
+	if (td->te_enabled && panel_data->use_ext_te) {
 		r = taal_dcs_write_1(DCS_TEAR_ON, 0);
 		if (r)
 			goto err;
@@ -1184,6 +1510,7 @@ err:
 	dev_err(&dssdev->dev, "performing LCD reset\n");
 
 	taal_power_off(dssdev);
+	taal_hw_reset(dssdev);
 	taal_power_on(dssdev);
 
 	dsi_bus_unlock();
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
index fa434ca6e4b..e320e67d06f 100644
--- a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -73,8 +73,12 @@ static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
 
 static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
 {
-	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
-		OMAP_DSS_LCD_IHS;
+	dssdev->panel.config = OMAP_DSS_LCD_TFT |
+			       OMAP_DSS_LCD_IVS |
+			       OMAP_DSS_LCD_IHS |
+			       OMAP_DSS_LCD_IPC |
+			       OMAP_DSS_LCD_ONOFF;
+
 	dssdev->panel.timings = toppoly_tdo_panel_timings;
 
 	return 0;
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e777e352dbc..5ecdc000409 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -31,6 +31,7 @@
 #include <linux/seq_file.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
+#include <linux/hardirq.h>
 
 #include <plat/sram.h>
 #include <plat/clock.h>
@@ -335,7 +336,7 @@ void dispc_save_context(void)
 void dispc_restore_context(void)
 {
 	RR(SYSCONFIG);
-	RR(IRQENABLE);
+	/*RR(IRQENABLE);*/
 	/*RR(CONTROL);*/
 	RR(CONFIG);
 	RR(DEFAULT_COLOR0);
@@ -472,6 +473,15 @@ void dispc_restore_context(void)
 
 	/* enable last, because LCD & DIGIT enable are here */
 	RR(CONTROL);
+
+	/* clear spurious SYNC_LOST_DIGIT interrupts */
+	dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
+
+	/*
+	 * enable last so IRQs won't trigger before
+	 * the context is fully restored
+	 */
+	RR(IRQENABLE);
 }
 
 #undef SR
@@ -3019,7 +3029,7 @@ void dispc_fake_vsync_irq(void)
 	u32 irqstatus = DISPC_IRQ_VSYNC;
 	int i;
 
-	local_irq_disable();
+	WARN_ON(!in_interrupt());
 
 	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
 		struct omap_dispc_isr_data *isr_data;
@@ -3031,8 +3041,6 @@ void dispc_fake_vsync_irq(void)
 		if (isr_data->mask & irqstatus)
 			isr_data->isr(isr_data->arg, irqstatus);
 	}
-
-	local_irq_enable();
 }
 #endif
 
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index ef8c8529dda..22dd7a474f7 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -82,6 +82,9 @@ static ssize_t display_upd_mode_store(struct device *dev,
 	int val, r;
 	enum omap_dss_update_mode mode;
 
+	if (!dssdev->driver->set_update_mode)
+		return -EINVAL;
+
 	val = simple_strtoul(buf, NULL, 10);
 
 	switch (val) {
@@ -343,7 +346,6 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 	case OMAP_DISPLAY_TYPE_VENC:
 	case OMAP_DISPLAY_TYPE_SDI:
 		return 24;
-		return 24;
 	default:
 		BUG();
 	}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 3af207b2bde..b3fa3a7db91 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -165,6 +165,14 @@ struct dsi_reg { u16 idx; };
 #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3	(1 << 25)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0	(1 << 30)
 #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1	(1 << 31)
+#define DSI_CIO_IRQ_ERROR_MASK \
+	(DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \
+	 DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \
+	 DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRCONTROL1 | \
+	 DSI_CIO_IRQ_ERRCONTROL2 | DSI_CIO_IRQ_ERRCONTROL3 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \
+	 DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3)
 
 #define DSI_DT_DCS_SHORT_WRITE_0	0x05
 #define DSI_DT_DCS_SHORT_WRITE_1	0x15
@@ -232,13 +240,15 @@ static struct
 	unsigned pll_locked;
 
 	struct completion bta_completion;
+	void (*bta_callback)(void);
 
 	int update_channel;
 	struct dsi_update_region update_region;
 
 	bool te_enabled;
 
-	struct work_struct framedone_work;
+	struct workqueue_struct *workqueue;
+
 	void (*framedone_callback)(int, void *);
 	void *framedone_data;
 
@@ -509,9 +519,13 @@ void dsi_irq_handler(void)
 		dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]);
 #endif
 
-		if (vcstatus & DSI_VC_IRQ_BTA)
+		if (vcstatus & DSI_VC_IRQ_BTA) {
 			complete(&dsi.bta_completion);
 
+			if (dsi.bta_callback)
+				dsi.bta_callback();
+		}
+
 		if (vcstatus & DSI_VC_IRQ_ERROR_MASK) {
 			DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
 				       i, vcstatus);
@@ -536,8 +550,12 @@ void dsi_irq_handler(void)
 		/* flush posted write */
 		dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
 
-		DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
-		print_irq_status_cio(ciostatus);
+		if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) {
+			DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
+			print_irq_status_cio(ciostatus);
+		} else if (debug_irq) {
+			print_irq_status_cio(ciostatus);
+		}
 	}
 
 	dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
@@ -584,11 +602,8 @@ static void _dsi_initialize_irq(void)
 	for (i = 0; i < 4; ++i)
 		dsi_write_reg(DSI_VC_IRQENABLE(i), l);
 
-	/* XXX zonda responds incorrectly, causing control error:
-	   Exit from LP-ESC mode to LP11 uses wrong transition states on the
-	   data lines LP0 and LN0. */
-	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
-			-1 & (~DSI_CIO_IRQ_ERRCONTROL2));
+	l = DSI_CIO_IRQ_ERROR_MASK;
+	dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, l);
 }
 
 static u32 dsi_get_errors(void)
@@ -1098,6 +1113,7 @@ int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk,
 	if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
 		DSSERR("PLL not coming out of reset.\n");
 		r = -ENODEV;
+		dispc_pck_free_enable(0);
 		goto err1;
 	}
 
@@ -1740,42 +1756,52 @@ static void dsi_vc_initial_config(int channel)
 	dsi.vc[channel].mode = DSI_VC_MODE_L4;
 }
 
-static void dsi_vc_config_l4(int channel)
+static int dsi_vc_config_l4(int channel)
 {
 	if (dsi.vc[channel].mode == DSI_VC_MODE_L4)
-		return;
+		return 0;
 
 	DSSDBGF("%d", channel);
 
 	dsi_vc_enable(channel, 0);
 
-	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+	/* VC_BUSY */
+	if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
 		DSSERR("vc(%d) busy when trying to config for L4\n", channel);
+		return -EIO;
+	}
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
 
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_L4;
+
+	return 0;
 }
 
-static void dsi_vc_config_vp(int channel)
+static int dsi_vc_config_vp(int channel)
 {
 	if (dsi.vc[channel].mode == DSI_VC_MODE_VP)
-		return;
+		return 0;
 
 	DSSDBGF("%d", channel);
 
 	dsi_vc_enable(channel, 0);
 
-	if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+	/* VC_BUSY */
+	if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
 		DSSERR("vc(%d) busy when trying to config for VP\n", channel);
+		return -EIO;
+	}
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
 
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_VP;
+
+	return 0;
 }
 
 
@@ -1854,19 +1880,19 @@ static u16 dsi_vc_flush_receive_data(int channel)
 		u32 val;
 		u8 dt;
 		val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
-		DSSDBG("\trawval %#08x\n", val);
+		DSSERR("\trawval %#08x\n", val);
 		dt = FLD_GET(val, 5, 0);
 		if (dt == DSI_DT_RX_ACK_WITH_ERR) {
 			u16 err = FLD_GET(val, 23, 8);
 			dsi_show_rx_ack_with_err(err);
 		} else if (dt == DSI_DT_RX_SHORT_READ_1) {
-			DSSDBG("\tDCS short response, 1 byte: %#x\n",
+			DSSERR("\tDCS short response, 1 byte: %#x\n",
 					FLD_GET(val, 23, 8));
 		} else if (dt == DSI_DT_RX_SHORT_READ_2) {
-			DSSDBG("\tDCS short response, 2 byte: %#x\n",
+			DSSERR("\tDCS short response, 2 byte: %#x\n",
 					FLD_GET(val, 23, 8));
 		} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
-			DSSDBG("\tDCS long response, len %d\n",
+			DSSERR("\tDCS long response, len %d\n",
 					FLD_GET(val, 23, 8));
 			dsi_vc_flush_long_data(channel);
 		} else {
@@ -2087,6 +2113,13 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len)
 	if (r)
 		goto err;
 
+	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {	/* RX_FIFO_NOT_EMPTY */
+		DSSERR("rx fifo not empty after write, dumping data:\n");
+		dsi_vc_flush_receive_data(channel);
+		r = -EIO;
+		goto err;
+	}
+
 	return 0;
 err:
 	DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
@@ -2233,11 +2266,12 @@ int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data)
 }
 EXPORT_SYMBOL(dsi_vc_dcs_read_1);
 
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2)
 {
+	u8 buf[2];
 	int r;
 
-	r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2);
+	r = dsi_vc_dcs_read(channel, dcs_cmd, buf, 2);
 
 	if (r < 0)
 		return r;
@@ -2245,231 +2279,122 @@ int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
 	if (r != 2)
 		return -EIO;
 
+	*data1 = buf[0];
+	*data2 = buf[1];
+
 	return 0;
 }
 EXPORT_SYMBOL(dsi_vc_dcs_read_2);
 
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
 {
-	int r;
-	r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
+	return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
 			len, 0);
-
-	if (r)
-		return r;
-
-	r = dsi_vc_send_bta_sync(channel);
-
-	return r;
 }
 EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
 
-static void dsi_set_lp_rx_timeout(unsigned long ns)
+static void dsi_set_lp_rx_timeout(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in DSI_FCK */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("LP_TX_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING2);
 	r = FLD_MOD(r, 1, 15, 15);	/* LP_RX_TO */
-	r = FLD_MOD(r, x16, 14, 14);	/* LP_RX_TO_X16 */
-	r = FLD_MOD(r, x4, 13, 13);	/* LP_RX_TO_X4 */
+	r = FLD_MOD(r, x16 ? 1 : 0, 14, 14);	/* LP_RX_TO_X16 */
+	r = FLD_MOD(r, x4 ? 1 : 0, 13, 13);	/* LP_RX_TO_X4 */
 	r = FLD_MOD(r, ticks, 12, 0);	/* LP_RX_COUNTER */
 	dsi_write_reg(DSI_TIMING2, r);
 
-	DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("LP_RX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_ta_timeout(unsigned long ns)
+static void dsi_set_ta_timeout(unsigned ticks, bool x8, bool x16)
 {
-	u32 r;
-	unsigned x8, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
+
+	BUG_ON(ticks > 0x1fff);
 
 	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x8 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 8;
-		x8 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x8 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16);
-		x8 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("TA_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x8 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING1);
 	r = FLD_MOD(r, 1, 31, 31);	/* TA_TO */
-	r = FLD_MOD(r, x16, 30, 30);	/* TA_TO_X16 */
-	r = FLD_MOD(r, x8, 29, 29);	/* TA_TO_X8 */
+	r = FLD_MOD(r, x16 ? 1 : 0, 30, 30);	/* TA_TO_X16 */
+	r = FLD_MOD(r, x8 ? 1 : 0, 29, 29);	/* TA_TO_X8 */
 	r = FLD_MOD(r, ticks, 28, 16);	/* TA_TO_COUNTER */
 	dsi_write_reg(DSI_TIMING1, r);
 
-	DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x8 ? " x8" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1);
+
+	DSSDBG("TA_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x8 ? " x8" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_stop_state_counter(unsigned long ns)
+static void dsi_set_stop_state_counter(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in DSI_FCK */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in DSI_FCK */
 	fck = dsi_fclk_rate();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("STOP_STATE_COUNTER_IO over limit, "
-				"setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING1);
 	r = FLD_MOD(r, 1, 15, 15);	/* FORCE_TX_STOP_MODE_IO */
-	r = FLD_MOD(r, x16, 14, 14);	/* STOP_STATE_X16_IO */
-	r = FLD_MOD(r, x4, 13, 13);	/* STOP_STATE_X4_IO */
+	r = FLD_MOD(r, x16 ? 1 : 0, 14, 14);	/* STOP_STATE_X16_IO */
+	r = FLD_MOD(r, x4 ? 1 : 0, 13, 13);	/* STOP_STATE_X4_IO */
 	r = FLD_MOD(r, ticks, 12, 0);	/* STOP_STATE_COUNTER_IO */
 	dsi_write_reg(DSI_TIMING1, r);
 
-	DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("STOP_STATE_COUNTER %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 
-static void dsi_set_hs_tx_timeout(unsigned long ns)
+static void dsi_set_hs_tx_timeout(unsigned ticks, bool x4, bool x16)
 {
-	u32 r;
-	unsigned x4, x16;
 	unsigned long fck;
-	unsigned long ticks;
+	unsigned long total_ticks;
+	u32 r;
 
-	/* ticks in TxByteClkHS */
+	BUG_ON(ticks > 0x1fff);
 
+	/* ticks in TxByteClkHS */
 	fck = dsi_get_txbyteclkhs();
-	ticks = (fck / 1000 / 1000) * ns / 1000;
-	x4 = 0;
-	x16 = 0;
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
-		x4 = 1;
-		x16 = 0;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
-		x4 = 0;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
-		x4 = 1;
-		x16 = 1;
-	}
-
-	if (ticks > 0x1fff) {
-		DSSWARN("HS_TX_TO over limit, setting it to max\n");
-		ticks = 0x1fff;
-		x4 = 1;
-		x16 = 1;
-	}
 
 	r = dsi_read_reg(DSI_TIMING2);
 	r = FLD_MOD(r, 1, 31, 31);	/* HS_TX_TO */
-	r = FLD_MOD(r, x16, 30, 30);	/* HS_TX_TO_X16 */
-	r = FLD_MOD(r, x4, 29, 29);	/* HS_TX_TO_X8 (4 really) */
+	r = FLD_MOD(r, x16 ? 1 : 0, 30, 30);	/* HS_TX_TO_X16 */
+	r = FLD_MOD(r, x4 ? 1 : 0, 29, 29);	/* HS_TX_TO_X8 (4 really) */
 	r = FLD_MOD(r, ticks, 28, 16);	/* HS_TX_TO_COUNTER */
 	dsi_write_reg(DSI_TIMING2, r);
 
-	DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n",
-			(ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
-			(fck / 1000 / 1000),
-			ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+	total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+	DSSDBG("HS_TX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+			total_ticks,
+			ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+			(total_ticks * 1000) / (fck / 1000 / 1000));
 }
 static int dsi_proto_config(struct omap_dss_device *dssdev)
 {
@@ -2487,10 +2412,10 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 			DSI_FIFO_SIZE_32);
 
 	/* XXX what values for the timeouts? */
-	dsi_set_stop_state_counter(1000);
-	dsi_set_ta_timeout(6400000);
-	dsi_set_lp_rx_timeout(48000);
-	dsi_set_hs_tx_timeout(1000000);
+	dsi_set_stop_state_counter(0x1000, false, false);
+	dsi_set_ta_timeout(0x1fff, true, true);
+	dsi_set_lp_rx_timeout(0x1fff, true, true);
+	dsi_set_hs_tx_timeout(0x1fff, true, true);
 
 	switch (dssdev->ctrl.pixel_size) {
 	case 16:
@@ -2759,6 +2684,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 	unsigned packet_payload;
 	unsigned packet_len;
 	u32 l;
+	int r;
 	const unsigned channel = dsi.update_channel;
 	/* line buffer is 1024 x 24bits */
 	/* XXX: for some reason using full buffer size causes considerable TX
@@ -2809,8 +2735,9 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
 
 	dsi_perf_mark_start();
 
-	schedule_delayed_work(&dsi.framedone_timeout_work,
+	r = queue_delayed_work(dsi.workqueue, &dsi.framedone_timeout_work,
 			msecs_to_jiffies(250));
+	BUG_ON(r == 0);
 
 	dss_start_update(dssdev);
 
@@ -2834,62 +2761,70 @@ static void dsi_te_timeout(unsigned long arg)
 }
 #endif
 
-static void dsi_framedone_timeout_work_callback(struct work_struct *work)
+static void dsi_handle_framedone(int error)
 {
-	int r;
 	const int channel = dsi.update_channel;
 
-	DSSERR("Framedone not received for 250ms!\n");
+	cancel_delayed_work(&dsi.framedone_timeout_work);
+
+	dsi_vc_disable_bta_irq(channel);
 
 	/* SIDLEMODE back to smart-idle */
 	dispc_enable_sidle();
 
+	dsi.bta_callback = NULL;
+
 	if (dsi.te_enabled) {
 		/* enable LP_RX_TO again after the TE */
 		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
 	}
 
-	/* Send BTA after the frame. We need this for the TE to work, as TE
-	 * trigger is only sent for BTAs without preceding packet. Thus we need
-	 * to BTA after the pixel packets so that next BTA will cause TE
-	 * trigger.
-	 *
-	 * This is not needed when TE is not in use, but we do it anyway to
-	 * make sure that the transfer has been completed. It would be more
-	 * optimal, but more complex, to wait only just before starting next
-	 * transfer. */
-	r = dsi_vc_send_bta_sync(channel);
-	if (r)
-		DSSERR("BTA after framedone failed\n");
-
 	/* RX_FIFO_NOT_EMPTY */
 	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
 		DSSERR("Received error during frame transfer:\n");
 		dsi_vc_flush_receive_data(channel);
+		if (!error)
+			error = -EIO;
 	}
 
-	dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
+	dsi.framedone_callback(error, dsi.framedone_data);
+
+	if (!error)
+		dsi_perf_show("DISPC");
 }
 
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
 {
-	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
-	 * turns itself off. However, DSI still has the pixels in its buffers,
-	 * and is sending the data.
-	 */
+	/* XXX While extremely unlikely, we could get FRAMEDONE interrupt after
+	 * 250ms which would conflict with this timeout work. What should be
+	 * done is first cancel the transfer on the HW, and then cancel the
+	 * possibly scheduled framedone work. However, cancelling the transfer
+	 * on the HW is buggy, and would probably require resetting the whole
+	 * DSI */
 
-	/* SIDLEMODE back to smart-idle */
-	dispc_enable_sidle();
+	DSSERR("Framedone not received for 250ms!\n");
 
-	schedule_work(&dsi.framedone_work);
+	dsi_handle_framedone(-ETIMEDOUT);
 }
 
-static void dsi_handle_framedone(void)
+static void dsi_framedone_bta_callback(void)
+{
+	dsi_handle_framedone(0);
+
+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
+	dispc_fake_vsync_irq();
+#endif
+}
+
+static void dsi_framedone_irq_callback(void *data, u32 mask)
 {
-	int r;
 	const int channel = dsi.update_channel;
+	int r;
 
-	DSSDBG("FRAMEDONE\n");
+	/* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+	 * turns itself off. However, DSI still has the pixels in its buffers,
+	 * and is sending the data.
+	 */
 
 	if (dsi.te_enabled) {
 		/* enable LP_RX_TO again after the TE */
@@ -2904,37 +2839,30 @@ static void dsi_handle_framedone(void)
 	 * This is not needed when TE is not in use, but we do it anyway to
 	 * make sure that the transfer has been completed. It would be more
 	 * optimal, but more complex, to wait only just before starting next
-	 * transfer. */
-	r = dsi_vc_send_bta_sync(channel);
-	if (r)
-		DSSERR("BTA after framedone failed\n");
-
-	/* RX_FIFO_NOT_EMPTY */
-	if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
-		DSSERR("Received error during frame transfer:\n");
-		dsi_vc_flush_receive_data(channel);
-	}
-
-#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
-	dispc_fake_vsync_irq();
-#endif
-}
-
-static void dsi_framedone_work_callback(struct work_struct *work)
-{
-	DSSDBGF();
+	 * transfer.
+	 *
+	 * Also, as there's no interrupt telling when the transfer has been
+	 * done and the channel could be reconfigured, the only way is to
+	 * busyloop until TE_SIZE is zero. With BTA we can do this
+	 * asynchronously.
+	 * */
 
-	cancel_delayed_work_sync(&dsi.framedone_timeout_work);
+	dsi.bta_callback = dsi_framedone_bta_callback;
 
-	dsi_handle_framedone();
+	barrier();
 
-	dsi_perf_show("DISPC");
+	dsi_vc_enable_bta_irq(channel);
 
-	dsi.framedone_callback(0, dsi.framedone_data);
+	r = dsi_vc_send_bta(channel);
+	if (r) {
+		DSSERR("BTA after framedone failed\n");
+		dsi_handle_framedone(-EIO);
+	}
 }
 
 int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
-				    u16 *x, u16 *y, u16 *w, u16 *h)
+				    u16 *x, u16 *y, u16 *w, u16 *h,
+				    bool enlarge_update_area)
 {
 	u16 dw, dh;
 
@@ -2958,7 +2886,8 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
 	dsi_perf_mark_setup();
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dss_setup_partial_planes(dssdev, x, y, w, h,
+				enlarge_update_area);
 		dispc_set_lcd_size(*w, *h);
 	}
 
@@ -2973,6 +2902,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
 {
 	dsi.update_channel = channel;
 
+	/* OMAP DSS cannot send updates of odd widths.
+	 * omap_dsi_prepare_update() makes the widths even, but add a BUG_ON
+	 * here to make sure we catch erroneous updates. Otherwise we'll only
+	 * see rather obscure HW error happening, as DSS halts. */
+	BUG_ON(x % 2 == 1);
+
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
 		dsi.framedone_callback = callback;
 		dsi.framedone_data = data;
@@ -2985,7 +2920,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
 
 		dsi_update_screen_dispc(dssdev, x, y, w, h);
 	} else {
-		dsi_update_screen_l4(dssdev, x, y, w, h);
+		int r;
+
+		r = dsi_update_screen_l4(dssdev, x, y, w, h);
+		if (r)
+			return r;
+
 		dsi_perf_show("L4");
 		callback(0, data);
 	}
@@ -3048,8 +2988,10 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
 	cinfo.regm3 = dssdev->phy.dsi.div.regm3;
 	cinfo.regm4 = dssdev->phy.dsi.div.regm4;
 	r = dsi_calc_clock_rates(&cinfo);
-	if (r)
+	if (r) {
+		DSSERR("Failed to calc dsi clocks\n");
 		return r;
+	}
 
 	r = dsi_pll_set_clock_div(&cinfo);
 	if (r) {
@@ -3147,6 +3089,13 @@ err0:
 
 static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
 {
+	/* disable interface */
+	dsi_if_enable(0);
+	dsi_vc_enable(0, 0);
+	dsi_vc_enable(1, 0);
+	dsi_vc_enable(2, 0);
+	dsi_vc_enable(3, 0);
+
 	dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
 	dsi_complexio_uninit();
@@ -3257,7 +3206,7 @@ void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 	burst_size_bytes = 16 * 32 / 8;
 
 	*fifo_high = fifo_size - burst_size_bytes;
-	*fifo_low = fifo_size - burst_size_bytes * 8;
+	*fifo_low = fifo_size - burst_size_bytes * 2;
 }
 
 int dsi_init_display(struct omap_dss_device *dssdev)
@@ -3274,6 +3223,18 @@ int dsi_init_display(struct omap_dss_device *dssdev)
 	return 0;
 }
 
+void dsi_wait_dsi1_pll_active(void)
+{
+	if (wait_for_bit_change(DSI_PLL_STATUS, 7, 1) != 1)
+		DSSERR("DSI1 PLL clock not active\n");
+}
+
+void dsi_wait_dsi2_pll_active(void)
+{
+	if (wait_for_bit_change(DSI_PLL_STATUS, 8, 1) != 1)
+		DSSERR("DSI2 PLL clock not active\n");
+}
+
 int dsi_init(struct platform_device *pdev)
 {
 	u32 rev;
@@ -3292,7 +3253,10 @@ int dsi_init(struct platform_device *pdev)
 	mutex_init(&dsi.lock);
 	sema_init(&dsi.bus_lock, 1);
 
-	INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+	dsi.workqueue = create_singlethread_workqueue("dsi");
+	if (dsi.workqueue == NULL)
+		return -ENOMEM;
+
 	INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
 			dsi_framedone_timeout_work_callback);
 
@@ -3328,6 +3292,7 @@ int dsi_init(struct platform_device *pdev)
 err2:
 	iounmap(dsi.base);
 err1:
+	destroy_workqueue(dsi.workqueue);
 	return r;
 }
 
@@ -3335,6 +3300,8 @@ void dsi_exit(void)
 {
 	iounmap(dsi.base);
 
+	destroy_workqueue(dsi.workqueue);
+
 	DSSDBG("omap_dsi_exit\n");
 }
 
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 24b18258654..77c3621c917 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -265,6 +265,9 @@ void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI1_PLL_FCLK)
+		dsi_wait_dsi1_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 0, 0);	/* DISPC_CLK_SWITCH */
 
 	dss.dispc_clk_source = clk_src;
@@ -279,6 +282,9 @@ void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI2_PLL_FCLK)
+		dsi_wait_dsi2_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 1, 1);	/* DSI_CLK_SWITCH */
 
 	dss.dsi_clk_source = clk_src;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 786f433fd57..5c7940d5f28 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -199,7 +199,8 @@ int dss_init_overlay_managers(struct platform_device *pdev);
 void dss_uninit_overlay_managers(struct platform_device *pdev);
 int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-				u16 *x, u16 *y, u16 *w, u16 *h);
+				u16 *x, u16 *y, u16 *w, u16 *h,
+				bool enlarge_update_area);
 void dss_start_update(struct omap_dss_device *dssdev);
 
 /* overlay */
@@ -281,6 +282,8 @@ void dsi_pll_uninit(void);
 void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
 		u32 *fifo_low, u32 *fifo_high);
+void dsi_wait_dsi1_pll_active(void);
+void dsi_wait_dsi2_pll_active(void);
 #else
 static inline int dsi_init(struct platform_device *pdev)
 {
@@ -289,6 +292,12 @@ static inline int dsi_init(struct platform_device *pdev)
 static inline void dsi_exit(void)
 {
 }
+static inline void dsi_wait_dsi1_pll_active(void)
+{
+}
+static inline void dsi_wait_dsi2_pll_active(void)
+{
+}
 #endif
 
 /* DPI */
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 9e1fbe531bf..6a649ab5539 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -440,6 +440,10 @@ struct manager_cache_data {
 
 	/* manual update region */
 	u16 x, y, w, h;
+
+	/* enlarge the update area if the update area contains scaled
+	 * overlays */
+	bool enlarge_update_area;
 };
 
 static struct {
@@ -525,7 +529,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 	int i;
 	struct omap_dss_device *dssdev = mgr->device;
 
-	if (!dssdev)
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
@@ -596,11 +600,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	int r;
 	int i;
 
-	if (!ovl->manager || !ovl->manager->device)
+	if (!ovl->manager)
 		return 0;
 
 	dssdev = ovl->manager->device;
 
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
 		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
 		channel = OMAP_DSS_CHANNEL_DIGIT;
@@ -718,6 +725,7 @@ static int configure_overlay(enum omap_plane plane)
 	u16 x, y, w, h;
 	u32 paddr;
 	int r;
+	u16 orig_w, orig_h, orig_outw, orig_outh;
 
 	DSSDBGF("%d", plane);
 
@@ -738,8 +746,16 @@ static int configure_overlay(enum omap_plane plane)
 	outh = c->out_height == 0 ? c->height : c->out_height;
 	paddr = c->paddr;
 
+	orig_w = w;
+	orig_h = h;
+	orig_outw = outw;
+	orig_outh = outh;
+
 	if (c->manual_update && mc->do_manual_update) {
 		unsigned bpp;
+		unsigned scale_x_m = w, scale_x_d = outw;
+		unsigned scale_y_m = h, scale_y_d = outh;
+
 		/* If the overlay is outside the update region, disable it */
 		if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
 					x, y, outw, outh)) {
@@ -770,38 +786,47 @@ static int configure_overlay(enum omap_plane plane)
 			BUG();
 		}
 
-		if (dispc_is_overlay_scaled(c)) {
-			/* If the overlay is scaled, the update area has
-			 * already been enlarged to cover the whole overlay. We
-			 * only need to adjust x/y here */
-			x = c->pos_x - mc->x;
-			y = c->pos_y - mc->y;
+		if (mc->x > c->pos_x) {
+			x = 0;
+			outw -= (mc->x - c->pos_x);
+			paddr += (mc->x - c->pos_x) *
+				scale_x_m / scale_x_d * bpp / 8;
 		} else {
-			if (mc->x > c->pos_x) {
-				x = 0;
-				w -= (mc->x - c->pos_x);
-				paddr += (mc->x - c->pos_x) * bpp / 8;
-			} else {
-				x = c->pos_x - mc->x;
-			}
-
-			if (mc->y > c->pos_y) {
-				y = 0;
-				h -= (mc->y - c->pos_y);
-				paddr += (mc->y - c->pos_y) * c->screen_width *
-					bpp / 8;
-			} else {
-				y = c->pos_y - mc->y;
-			}
-
-			if (mc->w < (x+w))
-				w -= (x+w) - (mc->w);
+			x = c->pos_x - mc->x;
+		}
 
-			if (mc->h < (y+h))
-				h -= (y+h) - (mc->h);
+		if (mc->y > c->pos_y) {
+			y = 0;
+			outh -= (mc->y - c->pos_y);
+			paddr += (mc->y - c->pos_y) *
+				scale_y_m / scale_y_d *
+				c->screen_width * bpp / 8;
+		} else {
+			y = c->pos_y - mc->y;
+		}
 
-			outw = w;
-			outh = h;
+		if (mc->w < (x + outw))
+			outw -= (x + outw) - (mc->w);
+
+		if (mc->h < (y + outh))
+			outh -= (y + outh) - (mc->h);
+
+		w = w * outw / orig_outw;
+		h = h * outh / orig_outh;
+
+		/* YUV mode overlay's input width has to be even and the
+		 * algorithm above may adjust the width to be odd.
+		 *
+		 * Here we adjust the width if needed, preferring to increase
+		 * the width if the original width was bigger.
+		 */
+		if ((w & 1) &&
+				(c->color_mode == OMAP_DSS_COLOR_YUV2 ||
+				 c->color_mode == OMAP_DSS_COLOR_UYVY)) {
+			if (orig_w > w)
+				w += 1;
+			else
+				w -= 1;
 		}
 	}
 
@@ -960,7 +985,7 @@ static void make_even(u16 *x, u16 *w)
 /* Configure dispc for partial update. Return possibly modified update
  * area */
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-		u16 *xi, u16 *yi, u16 *wi, u16 *hi)
+		u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area)
 {
 	struct overlay_cache_data *oc;
 	struct manager_cache_data *mc;
@@ -969,6 +994,7 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 	int i;
 	u16 x, y, w, h;
 	unsigned long flags;
+	bool area_changed;
 
 	x = *xi;
 	y = *yi;
@@ -989,73 +1015,91 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 
 	spin_lock_irqsave(&dss_cache.lock, flags);
 
-	/* We need to show the whole overlay if it is scaled. So look for
-	 * those, and make the update area larger if found.
-	 * Also mark the overlay cache dirty */
-	for (i = 0; i < num_ovls; ++i) {
-		unsigned x1, y1, x2, y2;
-		unsigned outw, outh;
+	/*
+	 * Execute the outer loop until the inner loop has completed
+	 * once without increasing the update area. This will ensure that
+	 * all scaled overlays end up completely within the update area.
+	 */
+	do {
+		area_changed = false;
 
-		oc = &dss_cache.overlay_cache[i];
+		/* We need to show the whole overlay if it is scaled. So look
+		 * for those, and make the update area larger if found.
+		 * Also mark the overlay cache dirty */
+		for (i = 0; i < num_ovls; ++i) {
+			unsigned x1, y1, x2, y2;
+			unsigned outw, outh;
 
-		if (oc->channel != mgr->id)
-			continue;
+			oc = &dss_cache.overlay_cache[i];
 
-		oc->dirty = true;
+			if (oc->channel != mgr->id)
+				continue;
 
-		if (!oc->enabled)
-			continue;
+			oc->dirty = true;
 
-		if (!dispc_is_overlay_scaled(oc))
-			continue;
+			if (!enlarge_update_area)
+				continue;
 
-		outw = oc->out_width == 0 ? oc->width : oc->out_width;
-		outh = oc->out_height == 0 ? oc->height : oc->out_height;
+			if (!oc->enabled)
+				continue;
 
-		/* is the overlay outside the update region? */
-		if (!rectangle_intersects(x, y, w, h,
-					oc->pos_x, oc->pos_y,
-					outw, outh))
-			continue;
+			if (!dispc_is_overlay_scaled(oc))
+				continue;
 
-		/* if the overlay totally inside the update region? */
-		if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
-					x, y, w, h))
-			continue;
+			outw = oc->out_width == 0 ?
+				oc->width : oc->out_width;
+			outh = oc->out_height == 0 ?
+				oc->height : oc->out_height;
+
+			/* is the overlay outside the update region? */
+			if (!rectangle_intersects(x, y, w, h,
+						oc->pos_x, oc->pos_y,
+						outw, outh))
+				continue;
 
-		if (x > oc->pos_x)
-			x1 = oc->pos_x;
-		else
-			x1 = x;
+			/* if the overlay totally inside the update region? */
+			if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
+						x, y, w, h))
+				continue;
 
-		if (y > oc->pos_y)
-			y1 = oc->pos_y;
-		else
-			y1 = y;
+			if (x > oc->pos_x)
+				x1 = oc->pos_x;
+			else
+				x1 = x;
 
-		if ((x + w) < (oc->pos_x + outw))
-			x2 = oc->pos_x + outw;
-		else
-			x2 = x + w;
+			if (y > oc->pos_y)
+				y1 = oc->pos_y;
+			else
+				y1 = y;
 
-		if ((y + h) < (oc->pos_y + outh))
-			y2 = oc->pos_y + outh;
-		else
-			y2 = y + h;
+			if ((x + w) < (oc->pos_x + outw))
+				x2 = oc->pos_x + outw;
+			else
+				x2 = x + w;
 
-		x = x1;
-		y = y1;
-		w = x2 - x1;
-		h = y2 - y1;
+			if ((y + h) < (oc->pos_y + outh))
+				y2 = oc->pos_y + outh;
+			else
+				y2 = y + h;
 
-		make_even(&x, &w);
+			x = x1;
+			y = y1;
+			w = x2 - x1;
+			h = y2 - y1;
 
-		DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
+			make_even(&x, &w);
+
+			DSSDBG("changing upd area due to ovl(%d) "
+			       "scaling %d,%d %dx%d\n",
 				i, x, y, w, h);
-	}
+
+			area_changed = true;
+		}
+	} while (area_changed);
 
 	mc = &dss_cache.manager_cache[mgr->id];
 	mc->do_manual_update = true;
+	mc->enlarge_update_area = enlarge_update_area;
 	mc->x = x;
 	mc->y = y;
 	mc->w = w;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 82336583ade..244dca81a39 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -65,7 +65,7 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
 			mgr = omap_dss_get_overlay_manager(i);
 
-			if (strncmp(buf, mgr->name, len) == 0)
+			if (sysfs_streq(buf, mgr->name))
 				break;
 
 			mgr = NULL;
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index cc23f53cc62..bbe62464e92 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -886,7 +886,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 		return -EINVAL;
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dss_setup_partial_planes(dssdev, x, y, w, h, true);
 		dispc_set_lcd_size(*w, *h);
 	}
 
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 9c7361871d7..6f435450987 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -34,12 +34,37 @@
 
 #include "omapfb.h"
 
+static u8 get_mem_idx(struct omapfb_info *ofbi)
+{
+	if (ofbi->id == ofbi->region->id)
+		return 0;
+
+	return OMAPFB_MEM_IDX_ENABLED | ofbi->region->id;
+}
+
+static struct omapfb2_mem_region *get_mem_region(struct omapfb_info *ofbi,
+						 u8 mem_idx)
+{
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+
+	if (mem_idx & OMAPFB_MEM_IDX_ENABLED)
+		mem_idx &= OMAPFB_MEM_IDX_MASK;
+	else
+		mem_idx = ofbi->id;
+
+	if (mem_idx >= fbdev->num_fbs)
+		return NULL;
+
+	return &fbdev->regions[mem_idx];
+}
+
 static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_overlay *ovl;
-	struct omap_overlay_info info;
+	struct omap_overlay_info old_info;
+	struct omapfb2_mem_region *old_rg, *new_rg;
 	int r = 0;
 
 	DBG("omapfb_setup_plane\n");
@@ -52,36 +77,106 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	/* XXX uses only the first overlay */
 	ovl = ofbi->overlays[0];
 
-	if (pi->enabled && !ofbi->region.size) {
+	old_rg = ofbi->region;
+	new_rg = get_mem_region(ofbi, pi->mem_idx);
+	if (!new_rg) {
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* Take the locks in a specific order to keep lockdep happy */
+	if (old_rg->id < new_rg->id) {
+		omapfb_get_mem_region(old_rg);
+		omapfb_get_mem_region(new_rg);
+	} else if (new_rg->id < old_rg->id) {
+		omapfb_get_mem_region(new_rg);
+		omapfb_get_mem_region(old_rg);
+	} else
+		omapfb_get_mem_region(old_rg);
+
+	if (pi->enabled && !new_rg->size) {
 		/*
 		 * This plane's memory was freed, can't enable it
 		 * until it's reallocated.
 		 */
 		r = -EINVAL;
-		goto out;
+		goto put_mem;
 	}
 
-	ovl->get_overlay_info(ovl, &info);
+	ovl->get_overlay_info(ovl, &old_info);
 
-	info.pos_x = pi->pos_x;
-	info.pos_y = pi->pos_y;
-	info.out_width = pi->out_width;
-	info.out_height = pi->out_height;
-	info.enabled = pi->enabled;
+	if (old_rg != new_rg) {
+		ofbi->region = new_rg;
+		set_fb_fix(fbi);
+	}
 
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		goto out;
+	if (pi->enabled) {
+		struct omap_overlay_info info;
 
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
+		r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
+			pi->out_width, pi->out_height);
 		if (r)
-			goto out;
+			goto undo;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		if (!info.enabled) {
+			info.enabled = pi->enabled;
+			r = ovl->set_overlay_info(ovl, &info);
+			if (r)
+				goto undo;
+		}
+	} else {
+		struct omap_overlay_info info;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		info.enabled = pi->enabled;
+		info.pos_x = pi->pos_x;
+		info.pos_y = pi->pos_y;
+		info.out_width = pi->out_width;
+		info.out_height = pi->out_height;
+
+		r = ovl->set_overlay_info(ovl, &info);
+		if (r)
+			goto undo;
 	}
 
-out:
-	if (r)
-		dev_err(fbdev->dev, "setup_plane failed\n");
+	if (ovl->manager)
+		ovl->manager->apply(ovl->manager);
+
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+
+	return 0;
+
+ undo:
+	if (old_rg != new_rg) {
+		ofbi->region = old_rg;
+		set_fb_fix(fbi);
+	}
+
+	ovl->set_overlay_info(ovl, &old_info);
+ put_mem:
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+ out:
+	dev_err(fbdev->dev, "setup_plane failed\n");
+
 	return r;
 }
 
@@ -92,8 +187,8 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	if (ofbi->num_overlays != 1) {
 		memset(pi, 0, sizeof(*pi));
 	} else {
-		struct omap_overlay_info *ovli;
 		struct omap_overlay *ovl;
+		struct omap_overlay_info *ovli;
 
 		ovl = ofbi->overlays[0];
 		ovli = &ovl->info;
@@ -103,6 +198,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 		pi->enabled = ovli->enabled;
 		pi->channel_out = 0; /* xxx */
 		pi->mirror = 0;
+		pi->mem_idx = get_mem_idx(ofbi);
 		pi->out_width = ovli->out_width;
 		pi->out_height = ovli->out_height;
 	}
@@ -115,7 +211,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
-	int r, i;
+	int r = 0, i;
 	size_t size;
 
 	if (mi->type > OMAPFB_MEMTYPE_MAX)
@@ -123,22 +219,44 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 
 	size = PAGE_ALIGN(mi->size);
 
-	rg = &ofbi->region;
+	rg = ofbi->region;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled)
-			return -EBUSY;
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
+		}
 	}
 
 	if (rg->size != size || rg->type != mi->type) {
 		r = omapfb_realloc_fbmem(fbi, size, mi->type);
 		if (r) {
 			dev_err(fbdev->dev, "realloc fbmem failed\n");
-			return r;
+			goto out;
 		}
 	}
 
-	return 0;
+ out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
+	return r;
 }
 
 static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
@@ -146,12 +264,14 @@ static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_mem_region *rg;
 
-	rg = &ofbi->region;
+	rg = omapfb_get_mem_region(ofbi->region);
 	memset(mi, 0, sizeof(*mi));
 
 	mi->size = rg->size;
 	mi->type = rg->type;
 
+	omapfb_put_mem_region(rg);
+
 	return 0;
 }
 
@@ -490,6 +610,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 		struct omapfb_vram_info		vram_info;
 		struct omapfb_tearsync_info	tearsync_info;
 		struct omapfb_display_info	display_info;
+		u32				crt;
 	} p;
 
 	int r = 0;
@@ -648,6 +769,17 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			r = -EFAULT;
 		break;
 
+	case FBIO_WAITFORVSYNC:
+		if (get_user(p.crt, (__u32 __user *)arg)) {
+			r = -EFAULT;
+			break;
+		}
+		if (p.crt != 0) {
+			r = -ENODEV;
+			break;
+		}
+		/* FALLTHROUGH */
+
 	case OMAPFB_WAITFORVSYNC:
 		DBG("ioctl WAITFORVSYNC\n");
 		if (!display) {
@@ -738,7 +870,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
-		if (!display->driver->enable_te) {
+		if (!display || !display->driver->enable_te) {
 			r = -ENODEV;
 			break;
 		}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 4b4506da96d..04034d410d6 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -157,7 +157,7 @@ static void fill_fb(struct fb_info *fbi)
 
 static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 {
-	const struct vrfb *vrfb = &ofbi->region.vrfb;
+	const struct vrfb *vrfb = &ofbi->region->vrfb;
 	unsigned offset;
 
 	switch (rot) {
@@ -185,27 +185,27 @@ static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
 static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
-		return ofbi->region.vrfb.paddr[rot]
+		return ofbi->region->vrfb.paddr[rot]
 			+ omapfb_get_vrfb_offset(ofbi, rot);
 	} else {
-		return ofbi->region.paddr;
+		return ofbi->region->paddr;
 	}
 }
 
 static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		return ofbi->region.vrfb.paddr[0];
+		return ofbi->region->vrfb.paddr[0];
 	else
-		return ofbi->region.paddr;
+		return ofbi->region->paddr;
 }
 
 static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi)
 {
 	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		return ofbi->region.vrfb.vaddr[0];
+		return ofbi->region->vrfb.vaddr[0];
 	else
-		return ofbi->region.vaddr;
+		return ofbi->region->vaddr;
 }
 
 static struct omapfb_colormode omapfb_colormodes[] = {
@@ -450,7 +450,7 @@ static int check_vrfb_fb_size(unsigned long region_size,
 static int check_fb_size(const struct omapfb_info *ofbi,
 		struct fb_var_screeninfo *var)
 {
-	unsigned long max_frame_size = ofbi->region.size;
+	unsigned long max_frame_size = ofbi->region->size;
 	int bytespp = var->bits_per_pixel >> 3;
 	unsigned long line_size = var->xres_virtual * bytespp;
 
@@ -497,7 +497,7 @@ static int check_fb_size(const struct omapfb_info *ofbi,
 static int setup_vrfb_rotation(struct fb_info *fbi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 	struct vrfb *vrfb = &rg->vrfb;
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct fb_fix_screeninfo *fix = &fbi->fix;
@@ -558,9 +558,9 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
 		return r;
 
 	/* used by open/write in fbmem.c */
-	fbi->screen_base = ofbi->region.vrfb.vaddr[0];
+	fbi->screen_base = ofbi->region->vrfb.vaddr[0];
 
-	fix->smem_start = ofbi->region.vrfb.paddr[0];
+	fix->smem_start = ofbi->region->vrfb.paddr[0];
 
 	switch (var->nonstd) {
 	case OMAPFB_COLOR_YUV422:
@@ -599,7 +599,7 @@ void set_fb_fix(struct fb_info *fbi)
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 
 	DBG("set_fb_fix\n");
 
@@ -668,8 +668,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 
 	DBG("check_fb_var %d\n", ofbi->id);
 
-	if (ofbi->region.size == 0)
-		return 0;
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
 
 	r = fb_mode_to_dss_mode(var, &mode);
 	if (r) {
@@ -684,13 +683,14 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
 		}
 	}
 
-	if (var->rotate < 0 || var->rotate > 3)
+	if (var->rotate > 3)
 		return -EINVAL;
 
 	if (check_fb_res_bounds(var))
 		return -EINVAL;
 
-	if (check_fb_size(ofbi, var))
+	/* When no memory is allocated ignore the size check */
+	if (ofbi->region->size != 0 && check_fb_size(ofbi, var))
 		return -EINVAL;
 
 	if (var->xres + var->xoffset > var->xres_virtual)
@@ -822,9 +822,43 @@ static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var,
 	return offset;
 }
 
+static void omapfb_calc_addr(const struct omapfb_info *ofbi,
+			     const struct fb_var_screeninfo *var,
+			     const struct fb_fix_screeninfo *fix,
+			     int rotation, u32 *paddr, void __iomem **vaddr)
+{
+	u32 data_start_p;
+	void __iomem *data_start_v;
+	int offset;
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+		data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
+		data_start_v = NULL;
+	} else {
+		data_start_p = omapfb_get_region_paddr(ofbi);
+		data_start_v = omapfb_get_region_vaddr(ofbi);
+	}
+
+	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+		offset = calc_rotation_offset_vrfb(var, fix, rotation);
+	else
+		offset = calc_rotation_offset_dma(var, fix, rotation);
+
+	data_start_p += offset;
+	data_start_v += offset;
+
+	if (offset)
+		DBG("offset %d, %d = %d\n",
+		    var->xoffset, var->yoffset, offset);
+
+	DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+
+	*paddr = data_start_p;
+	*vaddr = data_start_v;
+}
 
 /* setup overlay according to the fb */
-static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 		u16 posx, u16 posy, u16 outw, u16 outh)
 {
 	int r = 0;
@@ -832,9 +866,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 	struct fb_var_screeninfo *var = &fbi->var;
 	struct fb_fix_screeninfo *fix = &fbi->fix;
 	enum omap_color_mode mode = 0;
-	int offset;
-	u32 data_start_p;
-	void __iomem *data_start_v;
+	u32 data_start_p = 0;
+	void __iomem *data_start_v = NULL;
 	struct omap_overlay_info info;
 	int xres, yres;
 	int screen_width;
@@ -842,6 +875,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 	int rotation = var->rotate;
 	int i;
 
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
 	for (i = 0; i < ofbi->num_overlays; i++) {
 		if (ovl != ofbi->overlays[i])
 			continue;
@@ -861,28 +896,9 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
 		yres = var->yres;
 	}
 
-
-	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
-		data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
-		data_start_v = NULL;
-	} else {
-		data_start_p = omapfb_get_region_paddr(ofbi);
-		data_start_v = omapfb_get_region_vaddr(ofbi);
-	}
-
-	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
-		offset = calc_rotation_offset_vrfb(var, fix, rotation);
-	else
-		offset = calc_rotation_offset_dma(var, fix, rotation);
-
-	data_start_p += offset;
-	data_start_v += offset;
-
-	if (offset)
-		DBG("offset %d, %d = %d\n",
-				var->xoffset, var->yoffset, offset);
-
-	DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+	if (ofbi->region->size)
+		omapfb_calc_addr(ofbi, var, fix, rotation,
+				 &data_start_p, &data_start_v);
 
 	r = fb_mode_to_dss_mode(var, &mode);
 	if (r) {
@@ -954,12 +970,14 @@ int omapfb_apply_changes(struct fb_info *fbi, int init)
 		fill_fb(fbi);
 #endif
 
+	WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
 	for (i = 0; i < ofbi->num_overlays; i++) {
 		ovl = ofbi->overlays[i];
 
 		DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
 
-		if (ofbi->region.size == 0) {
+		if (ofbi->region->size == 0) {
 			/* the fb is not available. disable the overlay */
 			omapfb_overlay_enable(ovl, 0);
 			if (!init && ovl->manager)
@@ -1007,36 +1025,48 @@ err:
  * DO NOT MODIFY PAR */
 static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	int r;
 
 	DBG("check_var(%d)\n", FB2OFB(fbi)->id);
 
+	omapfb_get_mem_region(ofbi->region);
+
 	r = check_fb_var(fbi, var);
 
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 /* set the video mode according to info->var */
 static int omapfb_set_par(struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	int r;
 
 	DBG("set_par(%d)\n", FB2OFB(fbi)->id);
 
+	omapfb_get_mem_region(ofbi->region);
+
 	set_fb_fix(fbi);
 
 	r = setup_vrfb_rotation(fbi);
 	if (r)
-		return r;
+		goto out;
 
 	r = omapfb_apply_changes(fbi, 0);
 
+ out:
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 static int omapfb_pan_display(struct fb_var_screeninfo *var,
 		struct fb_info *fbi)
 {
+	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_var_screeninfo new_var;
 	int r;
 
@@ -1052,23 +1082,31 @@ static int omapfb_pan_display(struct fb_var_screeninfo *var,
 
 	fbi->var = new_var;
 
+	omapfb_get_mem_region(ofbi->region);
+
 	r = omapfb_apply_changes(fbi, 0);
 
+	omapfb_put_mem_region(ofbi->region);
+
 	return r;
 }
 
 static void mmap_user_open(struct vm_area_struct *vma)
 {
-	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+	struct omapfb2_mem_region *rg = vma->vm_private_data;
 
-	atomic_inc(&ofbi->map_count);
+	omapfb_get_mem_region(rg);
+	atomic_inc(&rg->map_count);
+	omapfb_put_mem_region(rg);
 }
 
 static void mmap_user_close(struct vm_area_struct *vma)
 {
-	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+	struct omapfb2_mem_region *rg = vma->vm_private_data;
 
-	atomic_dec(&ofbi->map_count);
+	omapfb_get_mem_region(rg);
+	atomic_dec(&rg->map_count);
+	omapfb_put_mem_region(rg);
 }
 
 static struct vm_operations_struct mmap_user_ops = {
@@ -1080,9 +1118,11 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct fb_fix_screeninfo *fix = &fbi->fix;
+	struct omapfb2_mem_region *rg;
 	unsigned long off;
 	unsigned long start;
 	u32 len;
+	int r = -EINVAL;
 
 	if (vma->vm_end - vma->vm_start == 0)
 		return 0;
@@ -1090,12 +1130,14 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 		return -EINVAL;
 	off = vma->vm_pgoff << PAGE_SHIFT;
 
+	rg = omapfb_get_mem_region(ofbi->region);
+
 	start = omapfb_get_region_paddr(ofbi);
 	len = fix->smem_len;
 	if (off >= len)
-		return -EINVAL;
+		goto error;
 	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
+		goto error;
 
 	off += start;
 
@@ -1105,13 +1147,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 	vma->vm_flags |= VM_IO | VM_RESERVED;
 	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
 	vma->vm_ops = &mmap_user_ops;
-	vma->vm_private_data = ofbi;
+	vma->vm_private_data = rg;
 	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-		return -EAGAIN;
+			       vma->vm_end - vma->vm_start,
+			       vma->vm_page_prot)) {
+		r = -EAGAIN;
+		goto error;
+	}
+
 	/* vm_ops.open won't be called for mmap itself. */
-	atomic_inc(&ofbi->map_count);
+	atomic_inc(&rg->map_count);
+
+	omapfb_put_mem_region(rg);
+
 	return 0;
+
+ error:
+	omapfb_put_mem_region(ofbi->region);
+
+	return r;
 }
 
 /* Store a single color palette entry into a pseudo palette or the hardware
@@ -1154,11 +1208,6 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
 		if (r != 0)
 			break;
 
-		if (regno < 0) {
-			r = -EINVAL;
-			break;
-		}
-
 		if (regno < 16) {
 			u16 pal;
 			pal = ((red >> (16 - var->red.length)) <<
@@ -1217,6 +1266,9 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
 	int do_update = 0;
 	int r = 0;
 
+	if (!display)
+		return -EINVAL;
+
 	omapfb_lock(fbdev);
 
 	switch (blank) {
@@ -1300,7 +1352,9 @@ static void omapfb_free_fbmem(struct fb_info *fbi)
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
 
-	rg = &ofbi->region;
+	rg = ofbi->region;
+
+	WARN_ON(atomic_read(&rg->map_count));
 
 	if (rg->paddr)
 		if (omap_vram_free(rg->paddr, rg->size))
@@ -1355,8 +1409,15 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
 	void __iomem *vaddr;
 	int r;
 
-	rg = &ofbi->region;
-	memset(rg, 0, sizeof(*rg));
+	rg = ofbi->region;
+
+	rg->paddr = 0;
+	rg->vaddr = NULL;
+	memset(&rg->vrfb, 0, sizeof rg->vrfb);
+	rg->size = 0;
+	rg->type = 0;
+	rg->alloc = false;
+	rg->map = false;
 
 	size = PAGE_ALIGN(size);
 
@@ -1609,7 +1670,7 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
 	for (i = 0; i < fbdev->num_fbs; i++) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
 		struct omapfb2_mem_region *rg;
-		rg = &ofbi->region;
+		rg = ofbi->region;
 
 		DBG("region%d phys %08x virt %p size=%lu\n",
 				i,
@@ -1626,7 +1687,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_dss_device *display = fb2display(fbi);
-	struct omapfb2_mem_region *rg = &ofbi->region;
+	struct omapfb2_mem_region *rg = ofbi->region;
 	unsigned long old_size = rg->size;
 	unsigned long old_paddr = rg->paddr;
 	int old_type = rg->type;
@@ -1709,7 +1770,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
 	fbi->flags = FBINFO_FLAG_DEFAULT;
 	fbi->pseudo_palette = fbdev->pseudo_palette;
 
-	if (ofbi->region.size == 0) {
+	if (ofbi->region->size == 0) {
 		clear_fb_info(fbi);
 		return 0;
 	}
@@ -1871,6 +1932,10 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 		ofbi->fbdev = fbdev;
 		ofbi->id = i;
 
+		ofbi->region = &fbdev->regions[i];
+		ofbi->region->id = i;
+		init_rwsem(&ofbi->region->lock);
+
 		/* assign these early, so that fb alloc can use them */
 		ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
 			OMAP_DSS_ROT_DMA;
@@ -1900,7 +1965,13 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 
 	/* setup fb_infos */
 	for (i = 0; i < fbdev->num_fbs; i++) {
-		r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		omapfb_get_mem_region(ofbi->region);
+		r = omapfb_fb_init(fbdev, fbi);
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r) {
 			dev_err(fbdev->dev, "failed to setup fb_info\n");
 			return r;
@@ -1921,20 +1992,19 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
 	DBG("framebuffers registered\n");
 
 	for (i = 0; i < fbdev->num_fbs; i++) {
-		r = omapfb_apply_changes(fbdev->fbs[i], 1);
+		struct fb_info *fbi = fbdev->fbs[i];
+		struct omapfb_info *ofbi = FB2OFB(fbi);
+
+		omapfb_get_mem_region(ofbi->region);
+		r = omapfb_apply_changes(fbi, 1);
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r) {
 			dev_err(fbdev->dev, "failed to change mode\n");
 			return r;
 		}
 	}
 
-	DBG("create sysfs for fbs\n");
-	r = omapfb_create_sysfs(fbdev);
-	if (r) {
-		dev_err(fbdev->dev, "failed to create sysfs entries\n");
-		return r;
-	}
-
 	/* Enable fb0 */
 	if (fbdev->num_fbs > 0) {
 		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
@@ -1968,11 +2038,11 @@ static int omapfb_mode_to_timings(const char *mode_str,
 #ifdef CONFIG_OMAP2_DSS_VENC
 	if (strcmp(mode_str, "pal") == 0) {
 		*timings = omap_dss_pal_timings;
-		*bpp = 0;
+		*bpp = 24;
 		return 0;
 	} else if (strcmp(mode_str, "ntsc") == 0) {
 		*timings = omap_dss_ntsc_timings;
-		*bpp = 0;
+		*bpp = 24;
 		return 0;
 	}
 #endif
@@ -2220,6 +2290,13 @@ static int omapfb_probe(struct platform_device *pdev)
 		}
 	}
 
+	DBG("create sysfs for fbs\n");
+	r = omapfb_create_sysfs(fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "failed to create sysfs entries\n");
+		goto cleanup;
+	}
+
 	return 0;
 
 cleanup:
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index 5179219128b..6f9c72cd6bb 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -49,6 +49,7 @@ static ssize_t store_rotate_type(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_mem_region *rg;
 	enum omap_dss_rotation_type rot_type;
 	int r;
 
@@ -64,9 +65,11 @@ static ssize_t store_rotate_type(struct device *dev,
 	if (rot_type == ofbi->rotation_type)
 		goto out;
 
-	if (ofbi->region.size) {
+	rg = omapfb_get_mem_region(ofbi->region);
+
+	if (rg->size) {
 		r = -EBUSY;
-		goto out;
+		goto put_region;
 	}
 
 	ofbi->rotation_type = rot_type;
@@ -75,6 +78,8 @@ static ssize_t store_rotate_type(struct device *dev,
 	 * Since the VRAM for this FB is not allocated at the moment we don't
 	 * need to do any further parameter checking at this point.
 	 */
+put_region:
+	omapfb_put_mem_region(rg);
 out:
 	unlock_fb_info(fbi);
 
@@ -97,7 +102,7 @@ static ssize_t store_mirror(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	bool mirror;
+	unsigned long mirror;
 	int r;
 	struct fb_var_screeninfo new_var;
 
@@ -111,6 +116,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	ofbi->mirror = mirror;
 
+	omapfb_get_mem_region(ofbi->region);
+
 	memcpy(&new_var, &fbi->var, sizeof(new_var));
 	r = check_fb_var(fbi, &new_var);
 	if (r)
@@ -125,6 +132,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	r = count;
 out:
+	omapfb_put_mem_region(ofbi->region);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -263,11 +272,15 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 
 		DBG("detaching %d\n", ofbi->overlays[i]->id);
 
+		omapfb_get_mem_region(ofbi->region);
+
 		omapfb_overlay_enable(ovl, 0);
 
 		if (ovl->manager)
 			ovl->manager->apply(ovl->manager);
 
+		omapfb_put_mem_region(ofbi->region);
+
 		for (t = i + 1; t < ofbi->num_overlays; t++) {
 			ofbi->rotation[t-1] = ofbi->rotation[t];
 			ofbi->overlays[t-1] = ofbi->overlays[t];
@@ -300,7 +313,12 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 	}
 
 	if (added) {
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 	}
@@ -388,7 +406,12 @@ static ssize_t store_overlays_rotate(struct device *dev,
 		for (i = 0; i < num_ovls; ++i)
 			ofbi->rotation[i] = rotation[i];
 
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 
@@ -408,7 +431,7 @@ static ssize_t show_size(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
+	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region->size);
 }
 
 static ssize_t store_size(struct device *dev, struct device_attribute *attr,
@@ -416,6 +439,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
 	unsigned long size;
 	int r;
 	int i;
@@ -425,15 +450,33 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 	if (!lock_fb_info(fbi))
 		return -ENODEV;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled) {
-			r = -EBUSY;
-			goto out;
+	rg = ofbi->region;
+
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
 		}
 	}
 
-	if (size != ofbi->region.size) {
-		r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
+	if (size != ofbi->region->size) {
+		r = omapfb_realloc_fbmem(fbi, size, ofbi->region->type);
 		if (r) {
 			dev_err(dev, "realloc fbmem failed\n");
 			goto out;
@@ -442,6 +485,9 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 
 	r = count;
 out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -453,7 +499,7 @@ static ssize_t show_phys(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
+	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region->paddr);
 }
 
 static ssize_t show_virt(struct device *dev,
@@ -462,7 +508,7 @@ static ssize_t show_virt(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
+	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region->vaddr);
 }
 
 static struct device_attribute omapfb_attrs[] = {
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index cd54fdbfd8b..1305fc9880b 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -27,6 +27,8 @@
 #define DEBUG
 #endif
 
+#include <linux/rwsem.h>
+
 #include <plat/display.h>
 
 #ifdef DEBUG
@@ -44,6 +46,7 @@ extern unsigned int omapfb_debug;
 #define OMAPFB_MAX_OVL_PER_FB 3
 
 struct omapfb2_mem_region {
+	int             id;
 	u32		paddr;
 	void __iomem	*vaddr;
 	struct vrfb	vrfb;
@@ -51,13 +54,15 @@ struct omapfb2_mem_region {
 	u8		type;		/* OMAPFB_PLANE_MEM_* */
 	bool		alloc;		/* allocated by the driver */
 	bool		map;		/* kernel mapped by the driver */
+	atomic_t	map_count;
+	struct rw_semaphore lock;
+	atomic_t	lock_count;
 };
 
 /* appended to fb_info */
 struct omapfb_info {
 	int id;
-	struct omapfb2_mem_region region;
-	atomic_t map_count;
+	struct omapfb2_mem_region *region;
 	int num_overlays;
 	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
 	struct omapfb2_device *fbdev;
@@ -76,6 +81,7 @@ struct omapfb2_device {
 
 	unsigned num_fbs;
 	struct fb_info *fbs[10];
+	struct omapfb2_mem_region regions[10];
 
 	unsigned num_displays;
 	struct omap_dss_device *displays[10];
@@ -117,6 +123,9 @@ int omapfb_update_window(struct fb_info *fbi,
 int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
 			struct fb_var_screeninfo *var);
 
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+		u16 posx, u16 posy, u16 outw, u16 outh);
+
 /* find the display connected to this fb, if any */
 static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
 {
@@ -148,8 +157,24 @@ static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
 	struct omap_overlay_info info;
 
 	ovl->get_overlay_info(ovl, &info);
+	if (info.enabled == enable)
+		return 0;
 	info.enabled = enable;
 	return ovl->set_overlay_info(ovl, &info);
 }
 
+static inline struct omapfb2_mem_region *
+omapfb_get_mem_region(struct omapfb2_mem_region *rg)
+{
+	down_read_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+	return rg;
+}
+
+static inline void omapfb_put_mem_region(struct omapfb2_mem_region *rg)
+{
+	atomic_dec(&rg->lock_count);
+	up_read(&rg->lock);
+}
+
 #endif
diff --git a/drivers/video/p9100.c b/drivers/video/p9100.c
index 6552751e81a..688b055abab 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/p9100.c
@@ -367,12 +367,12 @@ static int __init p9100_init(void)
 	if (fb_get_options("p9100fb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&p9100_driver, &of_bus_type);
+	return of_register_platform_driver(&p9100_driver);
 }
 
 static void __exit p9100_exit(void)
 {
-	of_unregister_driver(&p9100_driver);
+	of_unregister_platform_driver(&p9100_driver);
 }
 
 module_init(p9100_init);
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/sunxvr1000.c
index 489b44e8db8..7288934c0d4 100644
--- a/drivers/video/sunxvr1000.c
+++ b/drivers/video/sunxvr1000.c
@@ -213,12 +213,12 @@ static int __init gfb_init(void)
 	if (fb_get_options("gfb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&gfb_driver, &of_bus_type);
+	return of_register_platform_driver(&gfb_driver);
 }
 
 static void __exit gfb_exit(void)
 {
-	of_unregister_driver(&gfb_driver);
+	of_unregister_platform_driver(&gfb_driver);
 }
 
 module_init(gfb_init);
diff --git a/drivers/video/tcx.c b/drivers/video/tcx.c
index cc039b33d2d..f375e0db677 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/tcx.c
@@ -526,12 +526,12 @@ static int __init tcx_init(void)
 	if (fb_get_options("tcxfb", NULL))
 		return -ENODEV;
 
-	return of_register_driver(&tcx_driver, &of_bus_type);
+	return of_register_platform_driver(&tcx_driver);
 }
 
 static void __exit tcx_exit(void)
 {
-	of_unregister_driver(&tcx_driver);
+	of_unregister_platform_driver(&tcx_driver);
 }
 
 module_init(tcx_init);
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 98054839004..3ee5e63cfa4 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -1571,8 +1571,8 @@ out_err_iobase:
 	if (default_par->mtrr_handle >= 0)
 		mtrr_del(default_par->mtrr_handle, info->fix.smem_start,
 			 info->fix.smem_len);
-	release_mem_region(pci_resource_start(pdev, 2),
-			   pci_resource_len(pdev, 2));
+	release_region(pci_resource_start(pdev, 2),
+		       pci_resource_len(pdev, 2));
 out_err_screenbase:
 	if (info->screen_base)
 		iounmap(info->screen_base);
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index d9b6e06e070..ef1f3de2e05 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -160,7 +160,6 @@ struct lvds_setting_information {
 	int v_active;
 	int bpp;
 	int refresh_rate;
-	int get_lcd_size_method;
 	int lcd_panel_id;
 	int lcd_panel_hres;
 	int lcd_panel_vres;
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index b996803ae2c..7dcb4d5bb9c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -23,143 +23,341 @@
 #include "global.h"
 
 static struct pll_map pll_value[] = {
-	{CLK_25_175M, CLE266_PLL_25_175M, K800_PLL_25_175M,
-	 CX700_25_175M, VX855_25_175M},
-	{CLK_29_581M, CLE266_PLL_29_581M, K800_PLL_29_581M,
-	 CX700_29_581M, VX855_29_581M},
-	{CLK_26_880M, CLE266_PLL_26_880M, K800_PLL_26_880M,
-	 CX700_26_880M, VX855_26_880M},
-	{CLK_31_490M, CLE266_PLL_31_490M, K800_PLL_31_490M,
-	 CX700_31_490M, VX855_31_490M},
-	{CLK_31_500M, CLE266_PLL_31_500M, K800_PLL_31_500M,
-	 CX700_31_500M, VX855_31_500M},
-	{CLK_31_728M, CLE266_PLL_31_728M, K800_PLL_31_728M,
-	 CX700_31_728M, VX855_31_728M},
-	{CLK_32_668M, CLE266_PLL_32_668M, K800_PLL_32_668M,
-	 CX700_32_668M, VX855_32_668M},
-	{CLK_36_000M, CLE266_PLL_36_000M, K800_PLL_36_000M,
-	 CX700_36_000M, VX855_36_000M},
-	{CLK_40_000M, CLE266_PLL_40_000M, K800_PLL_40_000M,
-	 CX700_40_000M, VX855_40_000M},
-	{CLK_41_291M, CLE266_PLL_41_291M, K800_PLL_41_291M,
-	 CX700_41_291M, VX855_41_291M},
-	{CLK_43_163M, CLE266_PLL_43_163M, K800_PLL_43_163M,
-	 CX700_43_163M, VX855_43_163M},
-	{CLK_45_250M, CLE266_PLL_45_250M, K800_PLL_45_250M,
-	 CX700_45_250M, VX855_45_250M},
-	{CLK_46_000M, CLE266_PLL_46_000M, K800_PLL_46_000M,
-	 CX700_46_000M, VX855_46_000M},
-	{CLK_46_996M, CLE266_PLL_46_996M, K800_PLL_46_996M,
-	 CX700_46_996M, VX855_46_996M},
-	{CLK_48_000M, CLE266_PLL_48_000M, K800_PLL_48_000M,
-	 CX700_48_000M, VX855_48_000M},
-	{CLK_48_875M, CLE266_PLL_48_875M, K800_PLL_48_875M,
-	 CX700_48_875M, VX855_48_875M},
-	{CLK_49_500M, CLE266_PLL_49_500M, K800_PLL_49_500M,
-	 CX700_49_500M, VX855_49_500M},
-	{CLK_52_406M, CLE266_PLL_52_406M, K800_PLL_52_406M,
-	 CX700_52_406M, VX855_52_406M},
-	{CLK_52_977M, CLE266_PLL_52_977M, K800_PLL_52_977M,
-	 CX700_52_977M,	VX855_52_977M},
-	{CLK_56_250M, CLE266_PLL_56_250M, K800_PLL_56_250M,
-	 CX700_56_250M, VX855_56_250M},
-	{CLK_57_275M, 0, 0, 0, VX855_57_275M},
-	{CLK_60_466M, CLE266_PLL_60_466M, K800_PLL_60_466M,
-	 CX700_60_466M, VX855_60_466M},
-	{CLK_61_500M, CLE266_PLL_61_500M, K800_PLL_61_500M,
-	 CX700_61_500M, VX855_61_500M},
-	{CLK_65_000M, CLE266_PLL_65_000M, K800_PLL_65_000M,
-	 CX700_65_000M, VX855_65_000M},
-	{CLK_65_178M, CLE266_PLL_65_178M, K800_PLL_65_178M,
-	 CX700_65_178M, VX855_65_178M},
-	{CLK_66_750M, CLE266_PLL_66_750M, K800_PLL_66_750M,
-	 CX700_66_750M, VX855_66_750M},
-	{CLK_68_179M, CLE266_PLL_68_179M, K800_PLL_68_179M,
-	 CX700_68_179M, VX855_68_179M},
-	{CLK_69_924M, CLE266_PLL_69_924M, K800_PLL_69_924M,
-	 CX700_69_924M, VX855_69_924M},
-	{CLK_70_159M, CLE266_PLL_70_159M, K800_PLL_70_159M,
-	 CX700_70_159M, VX855_70_159M},
-	{CLK_72_000M, CLE266_PLL_72_000M, K800_PLL_72_000M,
-	 CX700_72_000M, VX855_72_000M},
-	{CLK_78_750M, CLE266_PLL_78_750M, K800_PLL_78_750M,
-	 CX700_78_750M, VX855_78_750M},
-	{CLK_80_136M, CLE266_PLL_80_136M, K800_PLL_80_136M,
-	 CX700_80_136M, VX855_80_136M},
-	{CLK_83_375M, CLE266_PLL_83_375M, K800_PLL_83_375M,
-	 CX700_83_375M, VX855_83_375M},
-	{CLK_83_950M, CLE266_PLL_83_950M, K800_PLL_83_950M,
-	 CX700_83_950M, VX855_83_950M},
-	{CLK_84_750M, CLE266_PLL_84_750M, K800_PLL_84_750M,
-	 CX700_84_750M, VX855_84_750M},
-	{CLK_85_860M, CLE266_PLL_85_860M, K800_PLL_85_860M,
-	 CX700_85_860M, VX855_85_860M},
-	{CLK_88_750M, CLE266_PLL_88_750M, K800_PLL_88_750M,
-	 CX700_88_750M, VX855_88_750M},
-	{CLK_94_500M, CLE266_PLL_94_500M, K800_PLL_94_500M,
-	 CX700_94_500M, VX855_94_500M},
-	{CLK_97_750M, CLE266_PLL_97_750M, K800_PLL_97_750M,
-	 CX700_97_750M, VX855_97_750M},
-	{CLK_101_000M, CLE266_PLL_101_000M, K800_PLL_101_000M,
-	 CX700_101_000M, VX855_101_000M},
-	{CLK_106_500M, CLE266_PLL_106_500M, K800_PLL_106_500M,
-	 CX700_106_500M, VX855_106_500M},
-	{CLK_108_000M, CLE266_PLL_108_000M, K800_PLL_108_000M,
-	 CX700_108_000M, VX855_108_000M},
-	{CLK_113_309M, CLE266_PLL_113_309M, K800_PLL_113_309M,
-	 CX700_113_309M, VX855_113_309M},
-	{CLK_118_840M, CLE266_PLL_118_840M, K800_PLL_118_840M,
-	 CX700_118_840M, VX855_118_840M},
-	{CLK_119_000M, CLE266_PLL_119_000M, K800_PLL_119_000M,
-	 CX700_119_000M, VX855_119_000M},
-	{CLK_121_750M, CLE266_PLL_121_750M, K800_PLL_121_750M,
-	 CX700_121_750M, 0},
-	{CLK_125_104M, CLE266_PLL_125_104M, K800_PLL_125_104M,
-	 CX700_125_104M, 0},
-	{CLK_133_308M, CLE266_PLL_133_308M, K800_PLL_133_308M,
-	 CX700_133_308M, 0},
-	{CLK_135_000M, CLE266_PLL_135_000M, K800_PLL_135_000M,
-	 CX700_135_000M, VX855_135_000M},
-	{CLK_136_700M, CLE266_PLL_136_700M, K800_PLL_136_700M,
-	 CX700_136_700M, VX855_136_700M},
-	{CLK_138_400M, CLE266_PLL_138_400M, K800_PLL_138_400M,
-	 CX700_138_400M, VX855_138_400M},
-	{CLK_146_760M, CLE266_PLL_146_760M, K800_PLL_146_760M,
-	 CX700_146_760M, VX855_146_760M},
-	{CLK_153_920M, CLE266_PLL_153_920M, K800_PLL_153_920M,
-	 CX700_153_920M, VX855_153_920M},
-	{CLK_156_000M, CLE266_PLL_156_000M, K800_PLL_156_000M,
-	 CX700_156_000M, VX855_156_000M},
-	{CLK_157_500M, CLE266_PLL_157_500M, K800_PLL_157_500M,
-	 CX700_157_500M, VX855_157_500M},
-	{CLK_162_000M, CLE266_PLL_162_000M, K800_PLL_162_000M,
-	 CX700_162_000M, VX855_162_000M},
-	{CLK_187_000M, CLE266_PLL_187_000M, K800_PLL_187_000M,
-	 CX700_187_000M, VX855_187_000M},
-	{CLK_193_295M, CLE266_PLL_193_295M, K800_PLL_193_295M,
-	 CX700_193_295M, VX855_193_295M},
-	{CLK_202_500M, CLE266_PLL_202_500M, K800_PLL_202_500M,
-	 CX700_202_500M, VX855_202_500M},
-	{CLK_204_000M, CLE266_PLL_204_000M, K800_PLL_204_000M,
-	 CX700_204_000M, VX855_204_000M},
-	{CLK_218_500M, CLE266_PLL_218_500M, K800_PLL_218_500M,
-	 CX700_218_500M, VX855_218_500M},
-	{CLK_234_000M, CLE266_PLL_234_000M, K800_PLL_234_000M,
-	 CX700_234_000M, VX855_234_000M},
-	{CLK_267_250M, CLE266_PLL_267_250M, K800_PLL_267_250M,
-	 CX700_267_250M, VX855_267_250M},
-	{CLK_297_500M, CLE266_PLL_297_500M, K800_PLL_297_500M,
-	 CX700_297_500M, VX855_297_500M},
-	{CLK_74_481M, CLE266_PLL_74_481M, K800_PLL_74_481M,
-	 CX700_74_481M, VX855_74_481M},
-	{CLK_172_798M, CLE266_PLL_172_798M, K800_PLL_172_798M,
-	 CX700_172_798M, VX855_172_798M},
-	{CLK_122_614M, CLE266_PLL_122_614M, K800_PLL_122_614M,
-	 CX700_122_614M, VX855_122_614M},
-	{CLK_74_270M, CLE266_PLL_74_270M, K800_PLL_74_270M,
-	 CX700_74_270M, 0},
-	{CLK_148_500M, CLE266_PLL_148_500M, K800_PLL_148_500M,
-	 CX700_148_500M, VX855_148_500M}
+	{25175000,
+		{99, 7, 3},
+		{85, 3, 4},	/* ignoring bit difference: 0x00008000 */
+		{141, 5, 4},
+		{141, 5, 4} },
+	{29581000,
+		{33, 4, 2},
+		{66, 2, 4},	/* ignoring bit difference: 0x00808000 */
+		{166, 5, 4},	/* ignoring bit difference: 0x00008000 */
+		{165, 5, 4} },
+	{26880000,
+		{15, 4, 1},
+		{30, 2, 3},	/* ignoring bit difference: 0x00808000 */
+		{150, 5, 4},
+		{150, 5, 4} },
+	{31500000,
+		{53, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{141, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{176, 5, 4},
+		{176, 5, 4} },
+	{31728000,
+		{31, 7, 1},
+		{177, 5, 4},	/* ignoring bit difference: 0x00008000 */
+		{177, 5, 4},
+		{142, 4, 4} },
+	{32688000,
+		{73, 4, 3},
+		{146, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{183, 5, 4},
+		{146, 4, 4} },
+	{36000000,
+		{101, 5, 3},	/* ignoring bit difference: 0x00008000 */
+		{161, 4, 4},	/* ignoring bit difference: 0x00008000 */
+		{202, 5, 4},
+		{161, 4, 4} },
+	{40000000,
+		{89, 4, 3},
+		{89, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{112, 5, 3},
+		{112, 5, 3} },
+	{41291000,
+		{23, 4, 1},
+		{69, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{115, 5, 3},
+		{115, 5, 3} },
+	{43163000,
+		{121, 5, 3},
+		{121, 5, 3},	/* ignoring bit difference: 0x00008000 */
+		{121, 5, 3},
+		{121, 5, 3} },
+	{45250000,
+		{127, 5, 3},
+		{127, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{127, 5, 3},
+		{127, 5, 3} },
+	{46000000,
+		{90, 7, 2},
+		{103, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{129, 5, 3},
+		{103, 4, 3} },
+	{46996000,
+		{105, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{131, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{131, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{105, 4, 3} },
+	{48000000,
+		{67, 20, 0},
+		{134, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{134, 5, 3},
+		{134, 5, 3} },
+	{48875000,
+		{99, 29, 0},
+		{82, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{82, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{137, 5, 3} },
+	{49500000,
+		{83, 6, 2},
+		{83, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{138, 5, 3},
+		{83, 3, 3} },
+	{52406000,
+		{117, 4, 3},
+		{117, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{117, 4, 3},
+		{88, 3, 3} },
+	{52977000,
+		{37, 5, 1},
+		{148, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{148, 5, 3},
+		{148, 5, 3} },
+	{56250000,
+		{55, 7, 1},	/* ignoring bit difference: 0x00008000 */
+		{126, 4, 3},	/* ignoring bit difference: 0x00008000 */
+		{157, 5, 3},
+		{157, 5, 3} },
+	{57275000,
+		{0, 0, 0},
+		{2, 2, 0},
+		{2, 2, 0},
+		{157, 5, 3} },	/* ignoring bit difference: 0x00808000 */
+	{60466000,
+		{76, 9, 1},
+		{169, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{169, 5, 3},	/* FIXED: old = {72, 2, 3} */
+		{169, 5, 3} },
+	{61500000,
+		{86, 20, 0},
+		{172, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{172, 5, 3},
+		{172, 5, 3} },
+	{65000000,
+		{109, 6, 2},	/* ignoring bit difference: 0x00008000 */
+		{109, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{109, 3, 3},
+		{109, 3, 3} },
+	{65178000,
+		{91, 5, 2},
+		{182, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{109, 3, 3},
+		{182, 5, 3} },
+	{66750000,
+		{75, 4, 2},
+		{150, 4, 3},	/* ignoring bit difference: 0x00808000 */
+		{150, 4, 3},
+		{112, 3, 3} },
+	{68179000,
+		{19, 4, 0},
+		{114, 3, 3},	/* ignoring bit difference: 0x00008000 */
+		{190, 5, 3},
+		{191, 5, 3} },
+	{69924000,
+		{83, 17, 0},
+		{195, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{195, 5, 3},
+		{195, 5, 3} },
+	{70159000,
+		{98, 20, 0},
+		{196, 5, 3},	/* ignoring bit difference: 0x00808000 */
+		{196, 5, 3},
+		{195, 5, 3} },
+	{72000000,
+		{121, 24, 0},
+		{161, 4, 3},	/* ignoring bit difference: 0x00808000 */
+		{161, 4, 3},
+		{161, 4, 3} },
+	{78750000,
+		{33, 3, 1},
+		{66, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{110, 5, 2},
+		{110, 5, 2} },
+	{80136000,
+		{28, 5, 0},
+		{68, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{112, 5, 2},
+		{112, 5, 2} },
+	{83375000,
+		{93, 2, 3},
+		{93, 4, 2},	/* ignoring bit difference: 0x00800000 */
+		{93, 4, 2},	/* ignoring bit difference: 0x00800000 */
+		{117, 5, 2} },
+	{83950000,
+		{41, 7, 0},
+		{117, 5, 2},	/* ignoring bit difference: 0x00008000 */
+		{117, 5, 2},
+		{117, 5, 2} },
+	{84750000,
+		{118, 5, 2},
+		{118, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{118, 5, 2},
+		{118, 5, 2} },
+	{85860000,
+		{84, 7, 1},
+		{120, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{120, 5, 2},
+		{118, 5, 2} },
+	{88750000,
+		{31, 5, 0},
+		{124, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{174, 7, 2},	/* ignoring bit difference: 0x00808000 */
+		{124, 5, 2} },
+	{94500000,
+		{33, 5, 0},
+		{132, 5, 2},	/* ignoring bit difference: 0x00008000 */
+		{132, 5, 2},
+		{132, 5, 2} },
+	{97750000,
+		{82, 6, 1},
+		{137, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{137, 5, 2},
+		{137, 5, 2} },
+	{101000000,
+		{127, 9, 1},
+		{141, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{141, 5, 2},
+		{141, 5, 2} },
+	{106500000,
+		{119, 4, 2},
+		{119, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{119, 4, 2},
+		{149, 5, 2} },
+	{108000000,
+		{121, 4, 2},
+		{121, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{151, 5, 2},
+		{151, 5, 2} },
+	{113309000,
+		{95, 12, 0},
+		{95, 3, 2},	/* ignoring bit difference: 0x00808000 */
+		{95, 3, 2},
+		{159, 5, 2} },
+	{118840000,
+		{83, 5, 1},
+		{166, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{166, 5, 2},
+		{166, 5, 2} },
+	{119000000,
+		{108, 13, 0},
+		{133, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{133, 4, 2},
+		{167, 5, 2} },
+	{121750000,
+		{85, 5, 1},
+		{170, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{68, 2, 2},
+		{0, 0, 0} },
+	{125104000,
+		{53, 6, 0},	/* ignoring bit difference: 0x00008000 */
+		{106, 3, 2},	/* ignoring bit difference: 0x00008000 */
+		{175, 5, 2},
+		{0, 0, 0} },
+	{135000000,
+		{94, 5, 1},
+		{28, 3, 0},	/* ignoring bit difference: 0x00804000 */
+		{151, 4, 2},
+		{189, 5, 2} },
+	{136700000,
+		{115, 12, 0},
+		{191, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{191, 5, 2},
+		{191, 5, 2} },
+	{138400000,
+		{87, 9, 0},
+		{116, 3, 2},	/* ignoring bit difference: 0x00808000 */
+		{116, 3, 2},
+		{194, 5, 2} },
+	{146760000,
+		{103, 5, 1},
+		{206, 5, 2},	/* ignoring bit difference: 0x00808000 */
+		{206, 5, 2},
+		{206, 5, 2} },
+	{153920000,
+		{86, 8, 0},
+		{86, 4, 1},	/* ignoring bit difference: 0x00808000 */
+		{86, 4, 1},
+		{86, 4, 1} },	/* FIXED: old = {84, 2, 1} */
+	{156000000,
+		{109, 5, 1},
+		{109, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{109, 5, 1},
+		{108, 5, 1} },
+	{157500000,
+		{55, 5, 0},	/* ignoring bit difference: 0x00008000 */
+		{22, 2, 0},	/* ignoring bit difference: 0x00802000 */
+		{110, 5, 1},
+		{110, 5, 1} },
+	{162000000,
+		{113, 5, 1},
+		{113, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{113, 5, 1},
+		{113, 5, 1} },
+	{187000000,
+		{118, 9, 0},
+		{131, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{131, 5, 1},
+		{131, 5, 1} },
+	{193295000,
+		{108, 8, 0},
+		{81, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{135, 5, 1},
+		{135, 5, 1} },
+	{202500000,
+		{99, 7, 0},
+		{85, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{142, 5, 1},
+		{142, 5, 1} },
+	{204000000,
+		{100, 7, 0},
+		{143, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{143, 5, 1},
+		{143, 5, 1} },
+	{218500000,
+		{92, 6, 0},
+		{153, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{153, 5, 1},
+		{153, 5, 1} },
+	{234000000,
+		{98, 6, 0},
+		{98, 3, 1},	/* ignoring bit difference: 0x00008000 */
+		{98, 3, 1},
+		{164, 5, 1} },
+	{267250000,
+		{112, 6, 0},
+		{112, 3, 1},	/* ignoring bit difference: 0x00808000 */
+		{187, 5, 1},
+		{187, 5, 1} },
+	{297500000,
+		{102, 5, 0},	/* ignoring bit difference: 0x00008000 */
+		{166, 4, 1},	/* ignoring bit difference: 0x00008000 */
+		{208, 5, 1},
+		{208, 5, 1} },
+	{74481000,
+		{26, 5, 0},
+		{125, 3, 3},	/* ignoring bit difference: 0x00808000 */
+		{208, 5, 3},
+		{209, 5, 3} },
+	{172798000,
+		{121, 5, 1},
+		{121, 5, 1},	/* ignoring bit difference: 0x00808000 */
+		{121, 5, 1},
+		{121, 5, 1} },
+	{122614000,
+		{60, 7, 0},
+		{137, 4, 2},	/* ignoring bit difference: 0x00808000 */
+		{137, 4, 2},
+		{172, 5, 2} },
+	{74270000,
+		{83, 8, 1},
+		{208, 5, 3},
+		{208, 5, 3},
+		{0, 0, 0} },
+	{148500000,
+		{83, 8, 0},
+		{208, 5, 2},
+		{166, 4, 2},
+		{208, 5, 2} }
 };
 
 static struct fifo_depth_select display_fifo_depth_reg = {
@@ -1360,40 +1558,70 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
 
 }
 
+static u32 cle266_encode_pll(struct pll_config pll)
+{
+	return (pll.multiplier << 8)
+		| (pll.rshift << 6)
+		| pll.divisor;
+}
+
+static u32 k800_encode_pll(struct pll_config pll)
+{
+	return ((pll.divisor - 2) << 16)
+		| (pll.rshift << 10)
+		| (pll.multiplier - 2);
+}
+
+static u32 vx855_encode_pll(struct pll_config pll)
+{
+	return (pll.divisor << 16)
+		| (pll.rshift << 10)
+		| pll.multiplier;
+}
+
 u32 viafb_get_clk_value(int clk)
 {
-	int i;
+	u32 value = 0;
+	int i = 0;
 
-	for (i = 0; i < NUM_TOTAL_PLL_TABLE; i++) {
-		if (clk == pll_value[i].clk) {
-			switch (viaparinfo->chip_info->gfx_chip_name) {
-			case UNICHROME_CLE266:
-			case UNICHROME_K400:
-				return pll_value[i].cle266_pll;
-
-			case UNICHROME_K800:
-			case UNICHROME_PM800:
-			case UNICHROME_CN700:
-				return pll_value[i].k800_pll;
-
-			case UNICHROME_CX700:
-			case UNICHROME_K8M890:
-			case UNICHROME_P4M890:
-			case UNICHROME_P4M900:
-			case UNICHROME_VX800:
-				return pll_value[i].cx700_pll;
-			case UNICHROME_VX855:
-				return pll_value[i].vx855_pll;
-			}
+	while (i < NUM_TOTAL_PLL_TABLE && clk != pll_value[i].clk)
+		i++;
+
+	if (i == NUM_TOTAL_PLL_TABLE) {
+		printk(KERN_WARNING "viafb_get_clk_value: PLL lookup failed!");
+	} else {
+		switch (viaparinfo->chip_info->gfx_chip_name) {
+		case UNICHROME_CLE266:
+		case UNICHROME_K400:
+			value = cle266_encode_pll(pll_value[i].cle266_pll);
+			break;
+
+		case UNICHROME_K800:
+		case UNICHROME_PM800:
+		case UNICHROME_CN700:
+			value = k800_encode_pll(pll_value[i].k800_pll);
+			break;
+
+		case UNICHROME_CX700:
+		case UNICHROME_CN750:
+		case UNICHROME_K8M890:
+		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
+		case UNICHROME_VX800:
+			value = k800_encode_pll(pll_value[i].cx700_pll);
+			break;
+
+		case UNICHROME_VX855:
+			value = vx855_encode_pll(pll_value[i].vx855_pll);
+			break;
 		}
 	}
 
-	DEBUG_MSG(KERN_INFO "Can't find match PLL value\n\n");
-	return 0;
+	return value;
 }
 
 /* Set VCLK*/
-void viafb_set_vclock(u32 CLK, int set_iga)
+void viafb_set_vclock(u32 clk, int set_iga)
 {
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
@@ -1403,26 +1631,23 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
 		case UNICHROME_K400:
-			viafb_write_reg(SR46, VIASR, CLK / 0x100);
-			viafb_write_reg(SR47, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR46, (clk & 0x00FF));
+			via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8);
 			break;
 
 		case UNICHROME_K800:
 		case UNICHROME_PM800:
 		case UNICHROME_CN700:
 		case UNICHROME_CX700:
+		case UNICHROME_CN750:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
 		case UNICHROME_VX800:
 		case UNICHROME_VX855:
-			viafb_write_reg(SR44, VIASR, CLK / 0x10000);
-			DEBUG_MSG(KERN_INFO "\nSR44=%x", CLK / 0x10000);
-			viafb_write_reg(SR45, VIASR, (CLK & 0xFFFF) / 0x100);
-			DEBUG_MSG(KERN_INFO "\nSR45=%x",
-				  (CLK & 0xFFFF) / 0x100);
-			viafb_write_reg(SR46, VIASR, CLK % 0x100);
-			DEBUG_MSG(KERN_INFO "\nSR46=%x", CLK % 0x100);
+			via_write_reg(VIASR, SR44, (clk & 0x0000FF));
+			via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8);
+			via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16);
 			break;
 		}
 	}
@@ -1432,22 +1657,23 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
 		case UNICHROME_K400:
-			viafb_write_reg(SR44, VIASR, CLK / 0x100);
-			viafb_write_reg(SR45, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR44, (clk & 0x00FF));
+			via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8);
 			break;
 
 		case UNICHROME_K800:
 		case UNICHROME_PM800:
 		case UNICHROME_CN700:
 		case UNICHROME_CX700:
+		case UNICHROME_CN750:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
 		case UNICHROME_P4M900:
 		case UNICHROME_VX800:
 		case UNICHROME_VX855:
-			viafb_write_reg(SR4A, VIASR, CLK / 0x10000);
-			viafb_write_reg(SR4B, VIASR, (CLK & 0xFFFF) / 0x100);
-			viafb_write_reg(SR4C, VIASR, CLK % 0x100);
+			via_write_reg(VIASR, SR4A, (clk & 0x0000FF));
+			via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8);
+			via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16);
 			break;
 		}
 	}
@@ -1791,8 +2017,6 @@ void viafb_init_chip_info(int chip_type)
 	viafb_set_iga_path();
 
 	viaparinfo->lvds_setting_info->display_method = viafb_lcd_dsp_method;
-	viaparinfo->lvds_setting_info->get_lcd_size_method =
-		GET_LCD_SIZE_BY_USER_SETTING;
 	viaparinfo->lvds_setting_info->lcd_mode = viafb_lcd_mode;
 	viaparinfo->lvds_setting_info2->display_method =
 		viaparinfo->lvds_setting_info->display_method;
@@ -1946,13 +2170,6 @@ static void init_tmds_chip_info(void)
 
 static void init_lvds_chip_info(void)
 {
-	if (viafb_lcd_panel_id > LCD_PANEL_ID_MAXIMUM)
-		viaparinfo->lvds_setting_info->get_lcd_size_method =
-		    GET_LCD_SIZE_BY_VGA_BIOS;
-	else
-		viaparinfo->lvds_setting_info->get_lcd_size_method =
-		    GET_LCD_SIZE_BY_USER_SETTING;
-
 	viafb_lvds_trasmitter_identify();
 	viafb_init_lcd_size();
 	viafb_init_lvds_output_interface(&viaparinfo->chip_info->lvds_chip_info,
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index a109de37981..c4439989529 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -700,12 +700,18 @@ struct _lcd_scaling_factor {
 	struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
 };
 
+struct pll_config {
+	u16 multiplier;
+	u8 divisor;
+	u8 rshift;
+};
+
 struct pll_map {
 	u32 clk;
-	u32 cle266_pll;
-	u32 k800_pll;
-	u32 cx700_pll;
-	u32 vx855_pll;
+	struct pll_config cle266_pll;
+	struct pll_config k800_pll;
+	struct pll_config cx700_pll;
+	struct pll_config vx855_pll;
 };
 
 struct rgbLUT {
diff --git a/drivers/video/via/ioctl.h b/drivers/video/via/ioctl.h
index c430fa23008..6010d10b59e 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/via/ioctl.h
@@ -35,11 +35,9 @@
 #define VIAFB_GET_SAMM_INFO		0x56494107	/* 'VIA\07' */
 #define VIAFB_TURN_ON_OUTPUT_DEVICE     0x56494108	/* 'VIA\08' */
 #define VIAFB_TURN_OFF_OUTPUT_DEVICE    0x56494109	/* 'VIA\09' */
-#define VIAFB_SET_DEVICE		0x5649410A
 #define VIAFB_GET_DEVICE		0x5649410B
 #define VIAFB_GET_DRIVER_VERSION	0x56494112	/* 'VIA\12' */
 #define VIAFB_GET_CHIP_INFO		0x56494113	/* 'VIA\13' */
-#define VIAFB_SET_DEVICE_INFO           0x56494114
 #define VIAFB_GET_DEVICE_INFO           0x56494115
 
 #define VIAFB_GET_DEVICE_SUPPORT	0x56494118
@@ -50,7 +48,6 @@
 #define VIAFB_GET_GAMMA_LUT		0x56494124
 #define VIAFB_SET_GAMMA_LUT		0x56494125
 #define VIAFB_GET_GAMMA_SUPPORT_STATE	0x56494126
-#define VIAFB_SET_SECOND_MODE		0x56494129
 #define VIAFB_SYNC_SURFACE		0x56494130
 #define VIAFB_GET_DRIVER_CAPS		0x56494131
 #define VIAFB_GET_IGA_SCALING_INFO	0x56494132
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 2ab0f156439..fc25ae30c5f 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -75,8 +75,6 @@ static void check_diport_of_integrated_lvds(
 static struct display_timing lcd_centering_timging(struct display_timing
 					    mode_crt_reg,
 					   struct display_timing panel_crt_reg);
-static void viafb_load_scaling_factor_for_p4m900(int set_hres,
-	int set_vres, int panel_hres, int panel_vres);
 
 static int check_lvds_chip(int device_id_subaddr, int device_id)
 {
@@ -89,33 +87,8 @@ static int check_lvds_chip(int device_id_subaddr, int device_id)
 void viafb_init_lcd_size(void)
 {
 	DEBUG_MSG(KERN_INFO "viafb_init_lcd_size()\n");
-	DEBUG_MSG(KERN_INFO
-		"viaparinfo->lvds_setting_info->get_lcd_size_method %d\n",
-		viaparinfo->lvds_setting_info->get_lcd_size_method);
 
-	switch (viaparinfo->lvds_setting_info->get_lcd_size_method) {
-	case GET_LCD_SIZE_BY_SYSTEM_BIOS:
-		break;
-	case GET_LCD_SZIE_BY_HW_STRAPPING:
-		break;
-	case GET_LCD_SIZE_BY_VGA_BIOS:
-		DEBUG_MSG(KERN_INFO "Get LCD Size method by VGA BIOS !!\n");
-		fp_id_to_vindex(viafb_lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		break;
-	case GET_LCD_SIZE_BY_USER_SETTING:
-		DEBUG_MSG(KERN_INFO "Get LCD Size method by user setting !!\n");
-		fp_id_to_vindex(viafb_lcd_panel_id);
-		DEBUG_MSG(KERN_INFO "LCD Panel_ID = %d\n",
-			  viaparinfo->lvds_setting_info->lcd_panel_id);
-		break;
-	default:
-		DEBUG_MSG(KERN_INFO "viafb_init_lcd_size fail\n");
-		viaparinfo->lvds_setting_info->lcd_panel_id =
-			LCD_PANEL_ID1_800X600;
-		fp_id_to_vindex(LCD_PANEL_ID1_800X600);
-	}
+	fp_id_to_vindex(viafb_lcd_panel_id);
 	viaparinfo->lvds_setting_info2->lcd_panel_id =
 		viaparinfo->lvds_setting_info->lcd_panel_id;
 	viaparinfo->lvds_setting_info2->lcd_panel_hres =
@@ -437,14 +410,9 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 
 	/* LCD Scaling Enable */
 	viafb_write_reg_mask(CR79, VIACR, 0x07, BIT0 + BIT1 + BIT2);
-	if (UNICHROME_P4M900 == viaparinfo->chip_info->gfx_chip_name) {
-		viafb_load_scaling_factor_for_p4m900(set_hres, set_vres,
-					       panel_hres, panel_vres);
-		return;
-	}
 
 	/* Check if expansion for horizontal */
-	if (set_hres != panel_hres) {
+	if (set_hres < panel_hres) {
 		/* Load Horizontal Scaling Factor */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -464,6 +432,10 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_CX700:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
+		case UNICHROME_CN750:
+		case UNICHROME_VX800:
+		case UNICHROME_VX855:
 			reg_value =
 			    K800_LCD_HOR_SCF_FORMULA(set_hres, panel_hres);
 			/* Horizontal scaling enabled */
@@ -483,7 +455,7 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 	}
 
 	/* Check if expansion for vertical */
-	if (set_vres != panel_vres) {
+	if (set_vres < panel_vres) {
 		/* Load Vertical Scaling Factor */
 		switch (viaparinfo->chip_info->gfx_chip_name) {
 		case UNICHROME_CLE266:
@@ -503,6 +475,10 @@ static void load_lcd_scaling(int set_hres, int set_vres, int panel_hres,
 		case UNICHROME_CX700:
 		case UNICHROME_K8M890:
 		case UNICHROME_P4M890:
+		case UNICHROME_P4M900:
+		case UNICHROME_CN750:
+		case UNICHROME_VX800:
+		case UNICHROME_VX855:
 			reg_value =
 			    K800_LCD_VER_SCF_FORMULA(set_vres, panel_vres);
 			/* Vertical scaling enabled */
@@ -648,9 +624,8 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 				 (mode_crt_reg, panel_crt_reg), IGA1);
 	} else {
 		/* Expansion */
-		if ((plvds_setting_info->display_method ==
-		     LCD_EXPANDSION) & ((set_hres != panel_hres)
-					|| (set_vres != panel_vres))) {
+		if (plvds_setting_info->display_method == LCD_EXPANDSION
+			&& (set_hres < panel_hres || set_vres < panel_vres)) {
 			/* expansion timing IGA2 loaded panel set timing*/
 			viafb_load_crtc_timing(panel_crt_reg, IGA2);
 			DEBUG_MSG(KERN_INFO "viafb_load_crtc_timing!!\n");
@@ -1139,69 +1114,3 @@ bool viafb_lcd_get_mobile_state(bool *mobile)
 		return false;
 	}
 }
-
-static void viafb_load_scaling_factor_for_p4m900(int set_hres,
-	int set_vres, int panel_hres, int panel_vres)
-{
-	int h_scaling_factor;
-	int v_scaling_factor;
-	u8 cra2 = 0;
-	u8 cr77 = 0;
-	u8 cr78 = 0;
-	u8 cr79 = 0;
-	u8 cr9f = 0;
-	/* Check if expansion for horizontal */
-	if (set_hres < panel_hres) {
-		/* Load Horizontal Scaling Factor */
-
-		/* For VIA_K8M800 or later chipsets. */
-		h_scaling_factor =
-		    K800_LCD_HOR_SCF_FORMULA(set_hres, panel_hres);
-		/* HSCaleFactor[1:0] at CR9F[1:0] */
-		cr9f = h_scaling_factor & 0x0003;
-		/* HSCaleFactor[9:2] at CR77[7:0] */
-		cr77 = (h_scaling_factor & 0x03FC) >> 2;
-		/* HSCaleFactor[11:10] at CR79[5:4] */
-		cr79 = (h_scaling_factor & 0x0C00) >> 10;
-		cr79 <<= 4;
-
-		/* Horizontal scaling enabled */
-		cra2 = 0xC0;
-
-		DEBUG_MSG(KERN_INFO "Horizontal Scaling value = %d\n",
-			  h_scaling_factor);
-	} else {
-		/* Horizontal scaling disabled */
-		cra2 = 0x00;
-	}
-
-	/* Check if expansion for vertical */
-	if (set_vres < panel_vres) {
-		/* Load Vertical Scaling Factor */
-
-		/* For VIA_K8M800 or later chipsets. */
-		v_scaling_factor =
-		    K800_LCD_VER_SCF_FORMULA(set_vres, panel_vres);
-
-		/* Vertical scaling enabled */
-		cra2 |= 0x08;
-		/* VSCaleFactor[0] at CR79[3] */
-		cr79 |= ((v_scaling_factor & 0x0001) << 3);
-		/* VSCaleFactor[8:1] at CR78[7:0] */
-		cr78 |= (v_scaling_factor & 0x01FE) >> 1;
-		/* VSCaleFactor[10:9] at CR79[7:6] */
-		cr79 |= ((v_scaling_factor & 0x0600) >> 9) << 6;
-
-		DEBUG_MSG(KERN_INFO "Vertical Scaling value = %d\n",
-			  v_scaling_factor);
-	} else {
-		/* Vertical scaling disabled */
-		cra2 |= 0x00;
-	}
-
-	viafb_write_reg_mask(CRA2, VIACR, cra2, BIT3 + BIT6 + BIT7);
-	viafb_write_reg_mask(CR77, VIACR, cr77, 0xFF);
-	viafb_write_reg_mask(CR78, VIACR, cr78, 0xFF);
-	viafb_write_reg_mask(CR79, VIACR, cr79, 0xF8);
-	viafb_write_reg_mask(CR9F, VIACR, cr9f, BIT0 + BIT1);
-}
diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h
index 9762ec62b49..b348efc360b 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/via/lcd.h
@@ -28,11 +28,6 @@
 #define     VT3271_DEVICE_ID_REG        0x02
 #define     VT3271_DEVICE_ID            0x71
 
-#define     GET_LCD_SIZE_BY_SYSTEM_BIOS     0x01
-#define     GET_LCD_SIZE_BY_VGA_BIOS        0x02
-#define     GET_LCD_SZIE_BY_HW_STRAPPING    0x03
-#define     GET_LCD_SIZE_BY_USER_SETTING    0x04
-
 /* Definition DVI Panel ID*/
 /* Resolution: 640x480,   Channel: single, Dithering: Enable */
 #define     LCD_PANEL_ID0_640X480       0x00
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 7f0de7f006a..2cbe1031b42 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -631,7 +631,6 @@
 #define CLK_25_175M     25175000
 #define CLK_26_880M     26880000
 #define CLK_29_581M     29581000
-#define CLK_31_490M     31490000
 #define CLK_31_500M     31500000
 #define CLK_31_728M     31728000
 #define CLK_32_668M     32688000
@@ -676,7 +675,6 @@
 #define CLK_119_000M    119000000
 #define CLK_121_750M    121750000	/* 121.704MHz */
 #define CLK_125_104M    125104000
-#define CLK_133_308M    133308000
 #define CLK_135_000M    135000000
 #define CLK_136_700M    136700000
 #define CLK_138_400M    138400000
@@ -699,313 +697,6 @@
 #define CLK_172_798M    172798000
 #define CLK_122_614M    122614000
 
-/* CLE266 PLL value
-*/
-#define CLE266_PLL_25_175M     0x0000C763
-#define CLE266_PLL_26_880M     0x0000440F
-#define CLE266_PLL_29_581M     0x00008421
-#define CLE266_PLL_31_490M     0x00004721
-#define CLE266_PLL_31_500M     0x0000C3B5
-#define CLE266_PLL_31_728M     0x0000471F
-#define CLE266_PLL_32_668M     0x0000C449
-#define CLE266_PLL_36_000M     0x0000C5E5
-#define CLE266_PLL_40_000M     0x0000C459
-#define CLE266_PLL_41_291M     0x00004417
-#define CLE266_PLL_43_163M     0x0000C579
-#define CLE266_PLL_45_250M     0x0000C57F	/* 45.46MHz */
-#define CLE266_PLL_46_000M     0x0000875A
-#define CLE266_PLL_46_996M     0x0000C4E9
-#define CLE266_PLL_48_000M     0x00001443
-#define CLE266_PLL_48_875M     0x00001D63
-#define CLE266_PLL_49_500M     0x00008653
-#define CLE266_PLL_52_406M     0x0000C475
-#define CLE266_PLL_52_977M     0x00004525
-#define CLE266_PLL_56_250M     0x000047B7
-#define CLE266_PLL_60_466M     0x0000494C
-#define CLE266_PLL_61_500M     0x00001456
-#define CLE266_PLL_65_000M     0x000086ED
-#define CLE266_PLL_65_178M     0x0000855B
-#define CLE266_PLL_66_750M     0x0000844B	/* 67.116MHz */
-#define CLE266_PLL_68_179M     0x00000413
-#define CLE266_PLL_69_924M     0x00001153
-#define CLE266_PLL_70_159M     0x00001462
-#define CLE266_PLL_72_000M     0x00001879
-#define CLE266_PLL_74_270M     0x00004853
-#define CLE266_PLL_78_750M     0x00004321
-#define CLE266_PLL_80_136M     0x0000051C
-#define CLE266_PLL_83_375M     0x0000C25D
-#define CLE266_PLL_83_950M     0x00000729
-#define CLE266_PLL_84_750M     0x00008576	/* 84.537MHz */
-#define CLE266_PLL_85_860M     0x00004754
-#define CLE266_PLL_88_750M     0x0000051F
-#define CLE266_PLL_94_500M     0x00000521
-#define CLE266_PLL_97_750M     0x00004652
-#define CLE266_PLL_101_000M    0x0000497F
-#define CLE266_PLL_106_500M    0x00008477	/* 106.491463 MHz */
-#define CLE266_PLL_108_000M    0x00008479
-#define CLE266_PLL_113_309M    0x00000C5F
-#define CLE266_PLL_118_840M    0x00004553
-#define CLE266_PLL_119_000M    0x00000D6C
-#define CLE266_PLL_121_750M    0x00004555	/* 121.704MHz */
-#define CLE266_PLL_125_104M    0x000006B5
-#define CLE266_PLL_133_308M    0x0000465F
-#define CLE266_PLL_135_000M    0x0000455E
-#define CLE266_PLL_136_700M    0x00000C73
-#define CLE266_PLL_138_400M    0x00000957
-#define CLE266_PLL_146_760M    0x00004567
-#define CLE266_PLL_148_500M    0x00000853
-#define CLE266_PLL_153_920M    0x00000856
-#define CLE266_PLL_156_000M    0x0000456D
-#define CLE266_PLL_157_500M    0x000005B7
-#define CLE266_PLL_162_000M    0x00004571
-#define CLE266_PLL_187_000M    0x00000976
-#define CLE266_PLL_193_295M    0x0000086C
-#define CLE266_PLL_202_500M    0x00000763
-#define CLE266_PLL_204_000M    0x00000764
-#define CLE266_PLL_218_500M    0x0000065C
-#define CLE266_PLL_234_000M    0x00000662
-#define CLE266_PLL_267_250M    0x00000670
-#define CLE266_PLL_297_500M    0x000005E6
-#define CLE266_PLL_74_481M     0x0000051A
-#define CLE266_PLL_172_798M    0x00004579
-#define CLE266_PLL_122_614M    0x0000073C
-
-/* K800 PLL value
-*/
-#define K800_PLL_25_175M     0x00539001
-#define K800_PLL_26_880M     0x001C8C80
-#define K800_PLL_29_581M     0x00409080
-#define K800_PLL_31_490M     0x006F9001
-#define K800_PLL_31_500M     0x008B9002
-#define K800_PLL_31_728M     0x00AF9003
-#define K800_PLL_32_668M     0x00909002
-#define K800_PLL_36_000M     0x009F9002
-#define K800_PLL_40_000M     0x00578C02
-#define K800_PLL_41_291M     0x00438C01
-#define K800_PLL_43_163M     0x00778C03
-#define K800_PLL_45_250M     0x007D8C83	/* 45.46MHz */
-#define K800_PLL_46_000M     0x00658C02
-#define K800_PLL_46_996M     0x00818C83
-#define K800_PLL_48_000M     0x00848C83
-#define K800_PLL_48_875M     0x00508C81
-#define K800_PLL_49_500M     0x00518C01
-#define K800_PLL_52_406M     0x00738C02
-#define K800_PLL_52_977M     0x00928C83
-#define K800_PLL_56_250M     0x007C8C02
-#define K800_PLL_60_466M     0x00A78C83
-#define K800_PLL_61_500M     0x00AA8C83
-#define K800_PLL_65_000M     0x006B8C01
-#define K800_PLL_65_178M     0x00B48C83
-#define K800_PLL_66_750M     0x00948C82	/* 67.116MHz */
-#define K800_PLL_68_179M     0x00708C01
-#define K800_PLL_69_924M     0x00C18C83
-#define K800_PLL_70_159M     0x00C28C83
-#define K800_PLL_72_000M     0x009F8C82
-#define K800_PLL_74_270M     0x00ce0c03
-#define K800_PLL_78_750M     0x00408801
-#define K800_PLL_80_136M     0x00428801
-#define K800_PLL_83_375M     0x005B0882
-#define K800_PLL_83_950M     0x00738803
-#define K800_PLL_84_750M     0x00748883	/* 84.477MHz */
-#define K800_PLL_85_860M     0x00768883
-#define K800_PLL_88_750M     0x007A8883
-#define K800_PLL_94_500M     0x00828803
-#define K800_PLL_97_750M     0x00878883
-#define K800_PLL_101_000M    0x008B8883
-#define K800_PLL_106_500M    0x00758882	/* 106.491463 MHz */
-#define K800_PLL_108_000M    0x00778882
-#define K800_PLL_113_309M    0x005D8881
-#define K800_PLL_118_840M    0x00A48883
-#define K800_PLL_119_000M    0x00838882
-#define K800_PLL_121_750M    0x00A88883	/* 121.704MHz */
-#define K800_PLL_125_104M    0x00688801
-#define K800_PLL_133_308M    0x005D8801
-#define K800_PLL_135_000M    0x001A4081
-#define K800_PLL_136_700M    0x00BD8883
-#define K800_PLL_138_400M    0x00728881
-#define K800_PLL_146_760M    0x00CC8883
-#define K800_PLL_148_500M    0x00ce0803
-#define K800_PLL_153_920M    0x00548482
-#define K800_PLL_156_000M    0x006B8483
-#define K800_PLL_157_500M    0x00142080
-#define K800_PLL_162_000M    0x006F8483
-#define K800_PLL_187_000M    0x00818483
-#define K800_PLL_193_295M    0x004F8481
-#define K800_PLL_202_500M    0x00538481
-#define K800_PLL_204_000M    0x008D8483
-#define K800_PLL_218_500M    0x00978483
-#define K800_PLL_234_000M    0x00608401
-#define K800_PLL_267_250M    0x006E8481
-#define K800_PLL_297_500M    0x00A48402
-#define K800_PLL_74_481M     0x007B8C81
-#define K800_PLL_172_798M    0x00778483
-#define K800_PLL_122_614M    0x00878882
-
-/* PLL for VT3324 */
-#define CX700_25_175M     0x008B1003
-#define CX700_26_719M     0x00931003
-#define CX700_26_880M     0x00941003
-#define CX700_29_581M     0x00A49003
-#define CX700_31_490M     0x00AE1003
-#define CX700_31_500M     0x00AE1003
-#define CX700_31_728M     0x00AF1003
-#define CX700_32_668M     0x00B51003
-#define CX700_36_000M     0x00C81003
-#define CX700_40_000M     0x006E0C03
-#define CX700_41_291M     0x00710C03
-#define CX700_43_163M     0x00770C03
-#define CX700_45_250M     0x007D0C03	/* 45.46MHz */
-#define CX700_46_000M     0x007F0C03
-#define CX700_46_996M     0x00818C83
-#define CX700_48_000M     0x00840C03
-#define CX700_48_875M     0x00508C81
-#define CX700_49_500M     0x00880C03
-#define CX700_52_406M     0x00730C02
-#define CX700_52_977M     0x00920C03
-#define CX700_56_250M     0x009B0C03
-#define CX700_60_466M     0x00460C00
-#define CX700_61_500M     0x00AA0C03
-#define CX700_65_000M     0x006B0C01
-#define CX700_65_178M     0x006B0C01
-#define CX700_66_750M     0x00940C02	/*67.116MHz */
-#define CX700_68_179M     0x00BC0C03
-#define CX700_69_924M     0x00C10C03
-#define CX700_70_159M     0x00C20C03
-#define CX700_72_000M     0x009F0C02
-#define CX700_74_270M     0x00CE0C03
-#define CX700_74_481M     0x00CE0C03
-#define CX700_78_750M     0x006C0803
-#define CX700_80_136M     0x006E0803
-#define CX700_83_375M     0x005B0882
-#define CX700_83_950M     0x00730803
-#define CX700_84_750M     0x00740803	/* 84.537Mhz */
-#define CX700_85_860M     0x00760803
-#define CX700_88_750M     0x00AC8885
-#define CX700_94_500M     0x00820803
-#define CX700_97_750M     0x00870803
-#define CX700_101_000M    0x008B0803
-#define CX700_106_500M    0x00750802
-#define CX700_108_000M    0x00950803
-#define CX700_113_309M    0x005D0801
-#define CX700_118_840M    0x00A40803
-#define CX700_119_000M    0x00830802
-#define CX700_121_750M    0x00420800	/* 121.704MHz */
-#define CX700_125_104M    0x00AD0803
-#define CX700_133_308M    0x00930802
-#define CX700_135_000M    0x00950802
-#define CX700_136_700M    0x00BD0803
-#define CX700_138_400M    0x00720801
-#define CX700_146_760M    0x00CC0803
-#define CX700_148_500M    0x00a40802
-#define CX700_153_920M    0x00540402
-#define CX700_156_000M    0x006B0403
-#define CX700_157_500M    0x006C0403
-#define CX700_162_000M    0x006F0403
-#define CX700_172_798M    0x00770403
-#define CX700_187_000M    0x00810403
-#define CX700_193_295M    0x00850403
-#define CX700_202_500M    0x008C0403
-#define CX700_204_000M    0x008D0403
-#define CX700_218_500M    0x00970403
-#define CX700_234_000M    0x00600401
-#define CX700_267_250M    0x00B90403
-#define CX700_297_500M    0x00CE0403
-#define CX700_122_614M    0x00870802
-
-/* PLL for VX855 */
-#define VX855_22_000M     0x007B1005
-#define VX855_25_175M     0x008D1005
-#define VX855_26_719M     0x00961005
-#define VX855_26_880M     0x00961005
-#define VX855_27_000M     0x00971005
-#define VX855_29_581M     0x00A51005
-#define VX855_29_829M     0x00641003
-#define VX855_31_490M     0x00B01005
-#define VX855_31_500M     0x00B01005
-#define VX855_31_728M     0x008E1004
-#define VX855_32_668M     0x00921004
-#define VX855_36_000M     0x00A11004
-#define VX855_40_000M     0x00700C05
-#define VX855_41_291M     0x00730C05
-#define VX855_43_163M     0x00790C05
-#define VX855_45_250M     0x007F0C05      /* 45.46MHz */
-#define VX855_46_000M     0x00670C04
-#define VX855_46_996M     0x00690C04
-#define VX855_48_000M     0x00860C05
-#define VX855_48_875M     0x00890C05
-#define VX855_49_500M     0x00530C03
-#define VX855_52_406M     0x00580C03
-#define VX855_52_977M     0x00940C05
-#define VX855_56_250M     0x009D0C05
-#define VX855_57_275M     0x009D8C85    /* Used by XO panel */
-#define VX855_60_466M     0x00A90C05
-#define VX855_61_500M     0x00AC0C05
-#define VX855_65_000M     0x006D0C03
-#define VX855_65_178M     0x00B60C05
-#define VX855_66_750M     0x00700C03    /*67.116MHz */
-#define VX855_67_295M     0x00BC0C05
-#define VX855_68_179M     0x00BF0C05
-#define VX855_68_369M     0x00BF0C05
-#define VX855_69_924M     0x00C30C05
-#define VX855_70_159M     0x00C30C05
-#define VX855_72_000M     0x00A10C04
-#define VX855_73_023M     0x00CC0C05
-#define VX855_74_481M     0x00D10C05
-#define VX855_78_750M     0x006E0805
-#define VX855_79_466M     0x006F0805
-#define VX855_80_136M     0x00700805
-#define VX855_81_627M     0x00720805
-#define VX855_83_375M     0x00750805
-#define VX855_83_527M     0x00750805
-#define VX855_83_950M     0x00750805
-#define VX855_84_537M     0x00760805
-#define VX855_84_750M     0x00760805     /* 84.537Mhz */
-#define VX855_85_500M     0x00760805        /* 85.909080 MHz*/
-#define VX855_85_860M     0x00760805
-#define VX855_85_909M     0x00760805
-#define VX855_88_750M     0x007C0805
-#define VX855_89_489M     0x007D0805
-#define VX855_94_500M     0x00840805
-#define VX855_96_648M     0x00870805
-#define VX855_97_750M     0x00890805
-#define VX855_101_000M    0x008D0805
-#define VX855_106_500M    0x00950805
-#define VX855_108_000M    0x00970805
-#define VX855_110_125M    0x00990805
-#define VX855_112_000M    0x009D0805
-#define VX855_113_309M    0x009F0805
-#define VX855_115_000M    0x00A10805
-#define VX855_118_840M    0x00A60805
-#define VX855_119_000M    0x00A70805
-#define VX855_121_750M    0x00AA0805       /* 121.704MHz */
-#define VX855_122_614M    0x00AC0805
-#define VX855_126_266M    0x00B10805
-#define VX855_130_250M    0x00B60805      /* 130.250 */
-#define VX855_135_000M    0x00BD0805
-#define VX855_136_700M    0x00BF0805
-#define VX855_137_750M    0x00C10805
-#define VX855_138_400M    0x00C20805
-#define VX855_144_300M    0x00CA0805
-#define VX855_146_760M    0x00CE0805
-#define VX855_148_500M	  0x00D00805
-#define VX855_153_920M    0x00540402
-#define VX855_156_000M    0x006C0405
-#define VX855_156_867M    0x006E0405
-#define VX855_157_500M    0x006E0405
-#define VX855_162_000M    0x00710405
-#define VX855_172_798M    0x00790405
-#define VX855_187_000M    0x00830405
-#define VX855_193_295M    0x00870405
-#define VX855_202_500M    0x008E0405
-#define VX855_204_000M    0x008F0405
-#define VX855_218_500M    0x00990405
-#define VX855_229_500M    0x00A10405
-#define VX855_234_000M    0x00A40405
-#define VX855_267_250M    0x00BB0405
-#define VX855_297_500M    0x00D00405
-#define VX855_339_500M    0x00770005
-#define VX855_340_772M    0x00770005
-
 
 /* Definition CRTC Timing Index */
 #define H_TOTAL_INDEX               0
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index e8cfe839211..66f40303311 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -64,7 +64,7 @@ static inline int viafb_mmio_read(int reg)
  */
 static u32 viafb_enabled_ints;
 
-static void viafb_int_init(void)
+static void __devinit viafb_int_init(void)
 {
 	viafb_enabled_ints = 0;
 
@@ -489,7 +489,7 @@ out_unmap:
 	return ret;
 }
 
-static void __devexit via_pci_teardown_mmio(struct viafb_dev *vdev)
+static void via_pci_teardown_mmio(struct viafb_dev *vdev)
 {
 	iounmap(vdev->fbmem);
 	iounmap(vdev->engine_mmio);
@@ -548,7 +548,7 @@ static int __devinit via_setup_subdevs(struct viafb_dev *vdev)
 	return 0;
 }
 
-static void __devexit via_teardown_subdevs(void)
+static void via_teardown_subdevs(void)
 {
 	int i;
 
@@ -613,22 +613,24 @@ static void __devexit via_pci_remove(struct pci_dev *pdev)
 static struct pci_device_id via_pci_table[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
 	  .driver_data = UNICHROME_CLE266 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
-	  .driver_data = UNICHROME_PM800 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
 	  .driver_data = UNICHROME_K400 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
 	  .driver_data = UNICHROME_K800 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+	  .driver_data = UNICHROME_PM800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN700_DID),
 	  .driver_data = UNICHROME_CN700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
-	  .driver_data = UNICHROME_K8M890 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
 	  .driver_data = UNICHROME_CX700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
-	  .driver_data = UNICHROME_P4M900 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
 	  .driver_data = UNICHROME_CN750 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+	  .driver_data = UNICHROME_K8M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	  .driver_data = UNICHROME_P4M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+	  .driver_data = UNICHROME_P4M900 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
 	  .driver_data = UNICHROME_VX800 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
index 595516aea69..39acb37e7a1 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/via/via-gpio.c
@@ -73,7 +73,7 @@ struct viafb_gpio_cfg {
 	struct gpio_chip gpio_chip;
 	struct viafb_dev *vdev;
 	struct viafb_gpio *active_gpios[VIAFB_NUM_GPIOS];
-	char *gpio_names[VIAFB_NUM_GPIOS];
+	const char *gpio_names[VIAFB_NUM_GPIOS];
 };
 
 /*
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 1082541358f..bdd0e4130f4 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -49,11 +49,6 @@ char *viafb_active_dev;
 char *viafb_lcd_port = "";
 char *viafb_dvi_port = "";
 
-static void viafb_set_device(struct device_t active_dev);
-static int apply_device_setting(struct viafb_ioctl_setting setting_info,
-			 struct fb_info *info);
-static void apply_second_mode_setting(struct fb_var_screeninfo
-	*sec_var);
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info);
 static int viafb_pan_display(struct fb_var_screeninfo *var,
@@ -221,9 +216,9 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 
 	/* Adjust var according to our driver's own table */
 	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
-	if (info->var.accel_flags & FB_ACCELF_TEXT &&
+	if (var->accel_flags & FB_ACCELF_TEXT &&
 		!ppar->shared->vdev->engine_mmio)
-		info->var.accel_flags = 0;
+		var->accel_flags = 0;
 
 	return 0;
 }
@@ -234,6 +229,7 @@ static int viafb_set_par(struct fb_info *info)
 	struct VideoModeTable *vmode_entry, *vmode_entry1 = NULL;
 	DEBUG_MSG(KERN_INFO "viafb_set_par!\n");
 
+	viafb_update_fix(info);
 	viapar->depth = fb_get_color_depth(&info->var, &info->fix);
 	viafb_update_device_setting(viafbinfo->var.xres, viafbinfo->var.yres,
 		viafbinfo->var.bits_per_pixel, viafb_refresh, 0);
@@ -257,7 +253,6 @@ static int viafb_set_par(struct fb_info *info)
 	}
 
 	if (vmode_entry) {
-		viafb_update_fix(info);
 		if (viafb_dual_fb && viapar->iga_path == IGA2)
 			viafb_bpp1 = info->var.bits_per_pixel;
 		else
@@ -478,13 +473,6 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 		if (gpu32 & LCD_Device)
 			viafb_lcd_disable();
 		break;
-	case VIAFB_SET_DEVICE:
-		if (copy_from_user(&u.active_dev, (void *)argp,
-			sizeof(u.active_dev)))
-			return -EFAULT;
-		viafb_set_device(u.active_dev);
-		viafb_set_par(info);
-		break;
 	case VIAFB_GET_DEVICE:
 		u.active_dev.crt = viafb_CRT_ON;
 		u.active_dev.dvi = viafb_DVI_ON;
@@ -527,21 +515,6 @@ static int viafb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
 
 		break;
 
-	case VIAFB_SET_DEVICE_INFO:
-		if (copy_from_user(&u.viafb_setting,
-			argp, sizeof(u.viafb_setting)))
-			return -EFAULT;
-		if (apply_device_setting(u.viafb_setting, info) < 0)
-			return -EINVAL;
-
-		break;
-
-	case VIAFB_SET_SECOND_MODE:
-		if (copy_from_user(&u.sec_var, argp, sizeof(u.sec_var)))
-			return -EFAULT;
-		apply_second_mode_setting(&u.sec_var);
-		break;
-
 	case VIAFB_GET_DEVICE_INFO:
 
 		retrieve_device_setting(&u.viafb_setting);
@@ -913,112 +886,6 @@ static int viafb_sync(struct fb_info *info)
 	return 0;
 }
 
-static void check_available_device_to_enable(int device_id)
-{
-	int device_num = 0;
-
-	/* Initialize: */
-	viafb_CRT_ON = STATE_OFF;
-	viafb_DVI_ON = STATE_OFF;
-	viafb_LCD_ON = STATE_OFF;
-	viafb_LCD2_ON = STATE_OFF;
-	viafb_DeviceStatus = None_Device;
-
-	if ((device_id & CRT_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_CRT_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= CRT_Device;
-	}
-
-	if ((device_id & DVI_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_DVI_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= DVI_Device;
-	}
-
-	if ((device_id & LCD_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_LCD_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= LCD_Device;
-	}
-
-	if ((device_id & LCD2_Device) && (device_num < MAX_ACTIVE_DEV_NUM)) {
-		viafb_LCD2_ON = STATE_ON;
-		device_num++;
-		viafb_DeviceStatus |= LCD2_Device;
-	}
-
-	if (viafb_DeviceStatus == None_Device) {
-		/* Use CRT as default active device: */
-		viafb_CRT_ON = STATE_ON;
-		viafb_DeviceStatus = CRT_Device;
-	}
-	DEBUG_MSG(KERN_INFO "Device Status:%x", viafb_DeviceStatus);
-}
-
-static void viafb_set_device(struct device_t active_dev)
-{
-	/* Check available device to enable: */
-	int device_id = None_Device;
-	if (active_dev.crt)
-		device_id |= CRT_Device;
-	if (active_dev.dvi)
-		device_id |= DVI_Device;
-	if (active_dev.lcd)
-		device_id |= LCD_Device;
-
-	check_available_device_to_enable(device_id);
-
-	/* Check property of LCD: */
-	if (viafb_LCD_ON) {
-		if (active_dev.lcd_dsp_cent) {
-			viaparinfo->lvds_setting_info->display_method =
-				viafb_lcd_dsp_method = LCD_CENTERING;
-		} else {
-			viaparinfo->lvds_setting_info->display_method =
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-		}
-
-		if (active_dev.lcd_mode == LCD_SPWG) {
-			viaparinfo->lvds_setting_info->lcd_mode =
-				viafb_lcd_mode = LCD_SPWG;
-		} else {
-			viaparinfo->lvds_setting_info->lcd_mode =
-				viafb_lcd_mode = LCD_OPENLDI;
-		}
-
-		if (active_dev.lcd_panel_id <= LCD_PANEL_ID_MAXIMUM) {
-			viafb_lcd_panel_id = active_dev.lcd_panel_id;
-			viafb_init_lcd_size();
-		}
-	}
-
-	/* Check property of mode: */
-	if (!active_dev.xres1)
-		viafb_second_xres = 640;
-	else
-		viafb_second_xres = active_dev.xres1;
-	if (!active_dev.yres1)
-		viafb_second_yres = 480;
-	else
-		viafb_second_yres = active_dev.yres1;
-	if (active_dev.bpp != 0)
-		viafb_bpp = active_dev.bpp;
-	if (active_dev.bpp1 != 0)
-		viafb_bpp1 = active_dev.bpp1;
-	if (active_dev.refresh != 0)
-		viafb_refresh = active_dev.refresh;
-	if (active_dev.refresh1 != 0)
-		viafb_refresh1 = active_dev.refresh1;
-	if ((active_dev.samm == STATE_OFF) || (active_dev.samm == STATE_ON))
-		viafb_SAMM_ON = active_dev.samm;
-	viafb_primary_dev = active_dev.primary_dev;
-
-	via_set_primary_address(0);
-	via_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
-	viafb_set_iga_path();
-}
-
 static int get_primary_device(void)
 {
 	int primary_device = 0;
@@ -1060,124 +927,6 @@ static int get_primary_device(void)
 	return primary_device;
 }
 
-static void apply_second_mode_setting(struct fb_var_screeninfo
-	*sec_var)
-{
-	u32 htotal, vtotal, long_refresh;
-
-	htotal = sec_var->xres + sec_var->left_margin +
-		sec_var->right_margin + sec_var->hsync_len;
-	vtotal = sec_var->yres + sec_var->upper_margin +
-		sec_var->lower_margin + sec_var->vsync_len;
-	if ((sec_var->xres_virtual * (sec_var->bits_per_pixel >> 3)) & 0x1F) {
-		/*Is 32 bytes alignment? */
-		/*32 pixel alignment */
-		sec_var->xres_virtual = (sec_var->xres_virtual + 31) & ~31;
-	}
-
-	htotal = sec_var->xres + sec_var->left_margin +
-		sec_var->right_margin + sec_var->hsync_len;
-	vtotal = sec_var->yres + sec_var->upper_margin +
-		sec_var->lower_margin + sec_var->vsync_len;
-	long_refresh = 1000000000UL / sec_var->pixclock * 1000;
-	long_refresh /= (htotal * vtotal);
-
-	viafb_second_xres = sec_var->xres;
-	viafb_second_yres = sec_var->yres;
-	viafb_second_virtual_xres = sec_var->xres_virtual;
-	viafb_second_virtual_yres = sec_var->yres_virtual;
-	viafb_bpp1 = sec_var->bits_per_pixel;
-	viafb_refresh1 = viafb_get_refresh(sec_var->xres, sec_var->yres,
-		long_refresh);
-}
-
-static int apply_device_setting(struct viafb_ioctl_setting setting_info,
-	struct fb_info *info)
-{
-	int need_set_mode = 0;
-	DEBUG_MSG(KERN_INFO "apply_device_setting\n");
-
-	if (setting_info.device_flag) {
-		need_set_mode = 1;
-		check_available_device_to_enable(setting_info.device_status);
-	}
-
-	/* Unlock LCD's operation according to LCD flag
-	   and check if the setting value is valid. */
-	/* If the value is valid, apply the new setting value to the device. */
-	if (viafb_LCD_ON) {
-		if (setting_info.lcd_operation_flag & OP_LCD_CENTERING) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.display_center) {
-				/* Centering */
-				viaparinfo->lvds_setting_info->display_method =
-				    LCD_CENTERING;
-				viafb_lcd_dsp_method = LCD_CENTERING;
-				viaparinfo->lvds_setting_info2->display_method =
-				    viafb_lcd_dsp_method = LCD_CENTERING;
-			} else {
-				/* expandsion */
-				viaparinfo->lvds_setting_info->display_method =
-				    LCD_EXPANDSION;
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-				viaparinfo->lvds_setting_info2->display_method =
-				    LCD_EXPANDSION;
-				viafb_lcd_dsp_method = LCD_EXPANDSION;
-			}
-		}
-
-		if (setting_info.lcd_operation_flag & OP_LCD_MODE) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.lcd_mode ==
-				LCD_SPWG) {
-				viaparinfo->lvds_setting_info->lcd_mode =
-					viafb_lcd_mode = LCD_SPWG;
-			} else {
-				viaparinfo->lvds_setting_info->lcd_mode =
-					viafb_lcd_mode = LCD_OPENLDI;
-			}
-			viaparinfo->lvds_setting_info2->lcd_mode =
-			    viaparinfo->lvds_setting_info->lcd_mode;
-		}
-
-		if (setting_info.lcd_operation_flag & OP_LCD_PANEL_ID) {
-			need_set_mode = 1;
-			if (setting_info.lcd_attributes.panel_id <=
-			    LCD_PANEL_ID_MAXIMUM) {
-				viafb_lcd_panel_id =
-				    setting_info.lcd_attributes.panel_id;
-				viafb_init_lcd_size();
-			}
-		}
-	}
-
-	if (0 != (setting_info.samm_status & OP_SAMM)) {
-		setting_info.samm_status =
-		    setting_info.samm_status & (~OP_SAMM);
-		if (setting_info.samm_status == 0
-		    || setting_info.samm_status == 1) {
-			viafb_SAMM_ON = setting_info.samm_status;
-
-			if (viafb_SAMM_ON)
-				viafb_primary_dev = setting_info.primary_device;
-
-			via_set_primary_address(0);
-			via_set_secondary_address(viafb_SAMM_ON ?
-				viafb_second_offset : 0);
-			viafb_set_iga_path();
-		}
-		need_set_mode = 1;
-	}
-
-	if (!need_set_mode) {
-		;
-	} else {
-		viafb_set_iga_path();
-		viafb_set_par(info);
-	}
-	return true;
-}
-
 static void retrieve_device_setting(struct viafb_ioctl_setting
 	*setting_info)
 {
@@ -1776,10 +1525,6 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 	parse_lcd_port();
 	parse_dvi_port();
 
-	/* for dual-fb must viafb_SAMM_ON=1 and viafb_dual_fb=1 */
-	if (!viafb_SAMM_ON)
-		viafb_dual_fb = 0;
-
 	viafb_init_chip_info(vdev->chip_type);
 	/*
 	 * The framebuffer will have been successfully mapped by
@@ -1823,30 +1568,13 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 		parse_mode(viafb_mode1, &viafb_second_xres,
 			&viafb_second_yres);
 
-		if (0 == viafb_second_virtual_xres) {
-			switch (viafb_second_xres) {
-			case 1400:
-				viafb_second_virtual_xres = 1408;
-				break;
-			default:
-				viafb_second_virtual_xres = viafb_second_xres;
-				break;
-			}
-		}
-		if (0 == viafb_second_virtual_yres)
-			viafb_second_virtual_yres = viafb_second_yres;
+		viafb_second_virtual_xres = viafb_second_xres;
+		viafb_second_virtual_yres = viafb_second_yres;
 	}
 
 	default_var.xres = default_xres;
 	default_var.yres = default_yres;
-	switch (default_xres) {
-	case 1400:
-		default_var.xres_virtual = 1408;
-		break;
-	default:
-		default_var.xres_virtual = default_xres;
-		break;
-	}
+	default_var.xres_virtual = default_xres;
 	default_var.yres_virtual = default_yres;
 	default_var.bits_per_pixel = viafb_bpp;
 	default_var.pixclock =
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index e66b8b19ce5..d8b12c32e3e 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -858,9 +858,9 @@ unsigned long w100fb_gpio_read(int port)
 void w100fb_gpio_write(int port, unsigned long value)
 {
 	if (port==W100_GPIO_PORT_A)
-		value = writel(value, remapped_regs + mmGPIO_DATA);
+		writel(value, remapped_regs + mmGPIO_DATA);
 	else
-		value = writel(value, remapped_regs + mmGPIO_DATA2);
+		writel(value, remapped_regs + mmGPIO_DATA2);
 }
 EXPORT_SYMBOL(w100fb_gpio_read);
 EXPORT_SYMBOL(w100fb_gpio_write);
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index fa97d3e7c21..7c7f42a1279 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -684,7 +684,7 @@ static struct xenbus_driver xenfb_driver = {
 
 static int __init xenfb_init(void)
 {
-	if (!xen_domain())
+	if (!xen_pv_domain())
 		return -ENODEV;
 
 	/* Nothing to do if running in dom0. */
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 574dc54e12d..29b5daacc21 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -485,6 +485,8 @@ static int __devexit xilinxfb_of_remove(struct of_device *op)
 /* Match table for of_platform binding */
 static struct of_device_id xilinxfb_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,xps-tft-1.00.a", },
+	{ .compatible = "xlnx,xps-tft-2.00.a", },
+	{ .compatible = "xlnx,xps-tft-2.01.a", },
 	{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
 	{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
 	{},
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index afcfacc9bbe..b04b1846893 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -875,6 +875,24 @@ config TXX9_WDT
 	help
 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
 
+config OCTEON_WDT
+	tristate "Cavium OCTEON SOC family Watchdog Timer"
+	depends on CPU_CAVIUM_OCTEON
+	default y
+	select EXPORT_UASM if OCTEON_WDT = m
+	help
+	  Hardware driver for OCTEON's on chip watchdog timer.
+	  Enables the watchdog for all cores running Linux. It
+	  installs a NMI handler and pokes the watchdog based on an
+	  interrupt.  On first expiration of the watchdog, the
+	  interrupt handler pokes it.  The second expiration causes an
+	  NMI that prints a message. The third expiration causes a
+	  global soft reset.
+
+	  When userspace has /dev/watchdog open, no poking is done
+	  from the first interrupt, it is then only poked when the
+	  device is written.
+
 # PARISC Architecture
 
 # POWERPC Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 72f3e2073f8..e30289a5e36 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -114,6 +114,8 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
 
 # PARISC Architecture
 
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index d62b9ce8f77..30a2512fd52 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -545,7 +545,7 @@ static int __devinit cpwd_probe(struct of_device *op,
 		goto out;
 	}
 
-	p->irq = op->irqs[0];
+	p->irq = op->archdata.irqs[0];
 
 	spin_lock_init(&p->lock);
 
@@ -688,12 +688,12 @@ static struct of_platform_driver cpwd_driver = {
 
 static int __init cpwd_init(void)
 {
-	return of_register_driver(&cpwd_driver, &of_bus_type);
+	return of_register_platform_driver(&cpwd_driver);
 }
 
 static void __exit cpwd_exit(void)
 {
-	of_unregister_driver(&cpwd_driver);
+	of_unregister_platform_driver(&cpwd_driver);
 }
 
 module_init(cpwd_init);
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
new file mode 100644
index 00000000000..2a410170eca
--- /dev/null
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -0,0 +1,745 @@
+/*
+ * Octeon Watchdog driver
+ *
+ * Copyright (C) 2007, 2008, 2009, 2010 Cavium Networks
+ *
+ * Some parts derived from wdt.c
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ *
+ * The OCTEON watchdog has a maximum timeout of 2^32 * io_clock.
+ * For most systems this is less than 10 seconds, so to allow for
+ * software to request longer watchdog heartbeats, we maintain software
+ * counters to count multiples of the base rate.  If the system locks
+ * up in such a manner that we can not run the software counters, the
+ * only result is a watchdog reset sooner than was requested.  But
+ * that is OK, because in this case userspace would likely not be able
+ * to do anything anyhow.
+ *
+ * The hardware watchdog interval we call the period.  The OCTEON
+ * watchdog goes through several stages, after the first period an
+ * irq is asserted, then if it is not reset, after the next period NMI
+ * is asserted, then after an additional period a chip wide soft reset.
+ * So for the software counters, we reset watchdog after each period
+ * and decrement the counter.  But for the last two periods we need to
+ * let the watchdog progress to the NMI stage so we disable the irq
+ * and let it proceed.  Once in the NMI, we print the register state
+ * to the serial port and then wait for the reset.
+ *
+ * A watchdog is maintained for each CPU in the system, that way if
+ * one CPU suffers a lockup, we also get a register dump and reset.
+ * The userspace ping resets the watchdog on all CPUs.
+ *
+ * Before userspace opens the watchdog device, we still run the
+ * watchdogs to catch any lockups that may be kernel related.
+ *
+ */
+
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/watchdog.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+
+#include <asm/mipsregs.h>
+#include <asm/uasm.h>
+
+#include <asm/octeon/octeon.h>
+
+/* The count needed to achieve timeout_sec. */
+static unsigned int timeout_cnt;
+
+/* The maximum period supported. */
+static unsigned int max_timeout_sec;
+
+/* The current period.  */
+static unsigned int timeout_sec;
+
+/* Set to non-zero when userspace countdown mode active */
+static int do_coundown;
+static unsigned int countdown_reset;
+static unsigned int per_cpu_countdown[NR_CPUS];
+
+static cpumask_t irq_enabled_cpus;
+
+#define WD_TIMO 60			/* Default heartbeat = 60 seconds */
+
+static int heartbeat = WD_TIMO;
+module_param(heartbeat, int, S_IRUGO);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (0 < heartbeat, default="
+				__MODULE_STRING(WD_TIMO) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, S_IRUGO);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned long octeon_wdt_is_open;
+static char expect_close;
+
+static u32 __initdata nmi_stage1_insns[64];
+/* We need one branch and therefore one relocation per target label. */
+static struct uasm_label __initdata labels[5];
+static struct uasm_reloc __initdata relocs[5];
+
+enum lable_id {
+	label_enter_bootloader = 1
+};
+
+/* Some CP0 registers */
+#define K0		26
+#define C0_CVMMEMCTL 11, 7
+#define C0_STATUS 12, 0
+#define C0_EBASE 15, 1
+#define C0_DESAVE 31, 0
+
+void octeon_wdt_nmi_stage2(void);
+
+static void __init octeon_wdt_build_stage1(void)
+{
+	int i;
+	int len;
+	u32 *p = nmi_stage1_insns;
+#ifdef CONFIG_HOTPLUG_CPU
+	struct uasm_label *l = labels;
+	struct uasm_reloc *r = relocs;
+#endif
+
+	/*
+	 * For the next few instructions running the debugger may
+	 * cause corruption of k0 in the saved registers. Since we're
+	 * about to crash, nobody probably cares.
+	 *
+	 * Save K0 into the debug scratch register
+	 */
+	uasm_i_dmtc0(&p, K0, C0_DESAVE);
+
+	uasm_i_mfc0(&p, K0, C0_STATUS);
+#ifdef CONFIG_HOTPLUG_CPU
+	uasm_il_bbit0(&p, &r, K0, ilog2(ST0_NMI), label_enter_bootloader);
+#endif
+	/* Force 64-bit addressing enabled */
+	uasm_i_ori(&p, K0, K0, ST0_UX | ST0_SX | ST0_KX);
+	uasm_i_mtc0(&p, K0, C0_STATUS);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	uasm_i_mfc0(&p, K0, C0_EBASE);
+	/* Coreid number in K0 */
+	uasm_i_andi(&p, K0, K0, 0xf);
+	/* 8 * coreid in bits 16-31 */
+	uasm_i_dsll_safe(&p, K0, K0, 3 + 16);
+	uasm_i_ori(&p, K0, K0, 0x8001);
+	uasm_i_dsll_safe(&p, K0, K0, 16);
+	uasm_i_ori(&p, K0, K0, 0x0700);
+	uasm_i_drotr_safe(&p, K0, K0, 32);
+	/*
+	 * Should result in: 0x8001,0700,0000,8*coreid which is
+	 * CVMX_CIU_WDOGX(coreid) - 0x0500
+	 *
+	 * Now ld K0, CVMX_CIU_WDOGX(coreid)
+	 */
+	uasm_i_ld(&p, K0, 0x500, K0);
+	/*
+	 * If bit one set handle the NMI as a watchdog event.
+	 * otherwise transfer control to bootloader.
+	 */
+	uasm_il_bbit0(&p, &r, K0, 1, label_enter_bootloader);
+	uasm_i_nop(&p);
+#endif
+
+	/* Clear Dcache so cvmseg works right. */
+	uasm_i_cache(&p, 1, 0, 0);
+
+	/* Use K0 to do a read/modify/write of CVMMEMCTL */
+	uasm_i_dmfc0(&p, K0, C0_CVMMEMCTL);
+	/* Clear out the size of CVMSEG	*/
+	uasm_i_dins(&p, K0, 0, 0, 6);
+	/* Set CVMSEG to its largest value */
+	uasm_i_ori(&p, K0, K0, 0x1c0 | 54);
+	/* Store the CVMMEMCTL value */
+	uasm_i_dmtc0(&p, K0, C0_CVMMEMCTL);
+
+	/* Load the address of the second stage handler */
+	UASM_i_LA(&p, K0, (long)octeon_wdt_nmi_stage2);
+	uasm_i_jr(&p, K0);
+	uasm_i_dmfc0(&p, K0, C0_DESAVE);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	uasm_build_label(&l, p, label_enter_bootloader);
+	/* Jump to the bootloader and restore K0 */
+	UASM_i_LA(&p, K0, (long)octeon_bootloader_entry_addr);
+	uasm_i_jr(&p, K0);
+	uasm_i_dmfc0(&p, K0, C0_DESAVE);
+#endif
+	uasm_resolve_relocs(relocs, labels);
+
+	len = (int)(p - nmi_stage1_insns);
+	pr_debug("Synthesized NMI stage 1 handler (%d instructions).\n", len);
+
+	pr_debug("\t.set push\n");
+	pr_debug("\t.set noreorder\n");
+	for (i = 0; i < len; i++)
+		pr_debug("\t.word 0x%08x\n", nmi_stage1_insns[i]);
+	pr_debug("\t.set pop\n");
+
+	if (len > 32)
+		panic("NMI stage 1 handler exceeds 32 instructions, was %d\n", len);
+}
+
+static int cpu2core(int cpu)
+{
+#ifdef CONFIG_SMP
+	return cpu_logical_map(cpu);
+#else
+	return cvmx_get_core_num();
+#endif
+}
+
+static int core2cpu(int coreid)
+{
+#ifdef CONFIG_SMP
+	return cpu_number_map(coreid);
+#else
+	return 0;
+#endif
+}
+
+/**
+ * Poke the watchdog when an interrupt is received
+ *
+ * @cpl:
+ * @dev_id:
+ *
+ * Returns
+ */
+static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
+{
+	unsigned int core = cvmx_get_core_num();
+	int cpu = core2cpu(core);
+
+	if (do_coundown) {
+		if (per_cpu_countdown[cpu] > 0) {
+			/* We're alive, poke the watchdog */
+			cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
+			per_cpu_countdown[cpu]--;
+		} else {
+			/* Bad news, you are about to reboot. */
+			disable_irq_nosync(cpl);
+			cpumask_clear_cpu(cpu, &irq_enabled_cpus);
+		}
+	} else {
+		/* Not open, just ping away... */
+		cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
+	}
+	return IRQ_HANDLED;
+}
+
+/* From setup.c */
+extern int prom_putchar(char c);
+
+/**
+ * Write a string to the uart
+ *
+ * @str:        String to write
+ */
+static void octeon_wdt_write_string(const char *str)
+{
+	/* Just loop writing one byte at a time */
+	while (*str)
+		prom_putchar(*str++);
+}
+
+/**
+ * Write a hex number out of the uart
+ *
+ * @value:      Number to display
+ * @digits:     Number of digits to print (1 to 16)
+ */
+static void octeon_wdt_write_hex(u64 value, int digits)
+{
+	int d;
+	int v;
+	for (d = 0; d < digits; d++) {
+		v = (value >> ((digits - d - 1) * 4)) & 0xf;
+		if (v >= 10)
+			prom_putchar('a' + v - 10);
+		else
+			prom_putchar('0' + v);
+	}
+}
+
+const char *reg_name[] = {
+	"$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+	"a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+	"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+};
+
+/**
+ * NMI stage 3 handler. NMIs are handled in the following manner:
+ * 1) The first NMI handler enables CVMSEG and transfers from
+ * the bootbus region into normal memory. It is careful to not
+ * destroy any registers.
+ * 2) The second stage handler uses CVMSEG to save the registers
+ * and create a stack for C code. It then calls the third level
+ * handler with one argument, a pointer to the register values.
+ * 3) The third, and final, level handler is the following C
+ * function that prints out some useful infomration.
+ *
+ * @reg:    Pointer to register state before the NMI
+ */
+void octeon_wdt_nmi_stage3(u64 reg[32])
+{
+	u64 i;
+
+	unsigned int coreid = cvmx_get_core_num();
+	/*
+	 * Save status and cause early to get them before any changes
+	 * might happen.
+	 */
+	u64 cp0_cause = read_c0_cause();
+	u64 cp0_status = read_c0_status();
+	u64 cp0_error_epc = read_c0_errorepc();
+	u64 cp0_epc = read_c0_epc();
+
+	/* Delay so output from all cores output is not jumbled together. */
+	__delay(100000000ull * coreid);
+
+	octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x");
+	octeon_wdt_write_hex(coreid, 1);
+	octeon_wdt_write_string(" ***\r\n");
+	for (i = 0; i < 32; i++) {
+		octeon_wdt_write_string("\t");
+		octeon_wdt_write_string(reg_name[i]);
+		octeon_wdt_write_string("\t0x");
+		octeon_wdt_write_hex(reg[i], 16);
+		if (i & 1)
+			octeon_wdt_write_string("\r\n");
+	}
+	octeon_wdt_write_string("\terr_epc\t0x");
+	octeon_wdt_write_hex(cp0_error_epc, 16);
+
+	octeon_wdt_write_string("\tepc\t0x");
+	octeon_wdt_write_hex(cp0_epc, 16);
+	octeon_wdt_write_string("\r\n");
+
+	octeon_wdt_write_string("\tstatus\t0x");
+	octeon_wdt_write_hex(cp0_status, 16);
+	octeon_wdt_write_string("\tcause\t0x");
+	octeon_wdt_write_hex(cp0_cause, 16);
+	octeon_wdt_write_string("\r\n");
+
+	octeon_wdt_write_string("\tsum0\t0x");
+	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16);
+	octeon_wdt_write_string("\ten0\t0x");
+	octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16);
+	octeon_wdt_write_string("\r\n");
+
+	octeon_wdt_write_string("*** Chip soft reset soon ***\r\n");
+}
+
+static void octeon_wdt_disable_interrupt(int cpu)
+{
+	unsigned int core;
+	unsigned int irq;
+	union cvmx_ciu_wdogx ciu_wdog;
+
+	core = cpu2core(cpu);
+
+	irq = OCTEON_IRQ_WDOG0 + core;
+
+	/* Poke the watchdog to clear out its state */
+	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
+
+	/* Disable the hardware. */
+	ciu_wdog.u64 = 0;
+	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+
+	free_irq(irq, octeon_wdt_poke_irq);
+}
+
+static void octeon_wdt_setup_interrupt(int cpu)
+{
+	unsigned int core;
+	unsigned int irq;
+	union cvmx_ciu_wdogx ciu_wdog;
+
+	core = cpu2core(cpu);
+
+	/* Disable it before doing anything with the interrupts. */
+	ciu_wdog.u64 = 0;
+	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+
+	per_cpu_countdown[cpu] = countdown_reset;
+
+	irq = OCTEON_IRQ_WDOG0 + core;
+
+	if (request_irq(irq, octeon_wdt_poke_irq,
+			IRQF_DISABLED, "octeon_wdt", octeon_wdt_poke_irq))
+		panic("octeon_wdt: Couldn't obtain irq %d", irq);
+
+	cpumask_set_cpu(cpu, &irq_enabled_cpus);
+
+	/* Poke the watchdog to clear out its state */
+	cvmx_write_csr(CVMX_CIU_PP_POKEX(core), 1);
+
+	/* Finally enable the watchdog now that all handlers are installed */
+	ciu_wdog.u64 = 0;
+	ciu_wdog.s.len = timeout_cnt;
+	ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
+	cvmx_write_csr(CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+}
+
+static int octeon_wdt_cpu_callback(struct notifier_block *nfb,
+					   unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_DOWN_PREPARE:
+		octeon_wdt_disable_interrupt(cpu);
+		break;
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		octeon_wdt_setup_interrupt(cpu);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static void octeon_wdt_ping(void)
+{
+	int cpu;
+	int coreid;
+
+	for_each_online_cpu(cpu) {
+		coreid = cpu2core(cpu);
+		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
+		per_cpu_countdown[cpu] = countdown_reset;
+		if ((countdown_reset || !do_coundown) &&
+		    !cpumask_test_cpu(cpu, &irq_enabled_cpus)) {
+			/* We have to enable the irq */
+			int irq = OCTEON_IRQ_WDOG0 + coreid;
+			enable_irq(irq);
+			cpumask_set_cpu(cpu, &irq_enabled_cpus);
+		}
+	}
+}
+
+static void octeon_wdt_calc_parameters(int t)
+{
+	unsigned int periods;
+
+	timeout_sec = max_timeout_sec;
+
+
+	/*
+	 * Find the largest interrupt period, that can evenly divide
+	 * the requested heartbeat time.
+	 */
+	while ((t % timeout_sec) != 0)
+		timeout_sec--;
+
+	periods = t / timeout_sec;
+
+	/*
+	 * The last two periods are after the irq is disabled, and
+	 * then to the nmi, so we subtract them off.
+	 */
+
+	countdown_reset = periods > 2 ? periods - 2 : 0;
+	heartbeat = t;
+	timeout_cnt = ((octeon_get_clock_rate() >> 8) * timeout_sec) >> 8;
+}
+
+static int octeon_wdt_set_heartbeat(int t)
+{
+	int cpu;
+	int coreid;
+	union cvmx_ciu_wdogx ciu_wdog;
+
+	if (t <= 0)
+		return -1;
+
+	octeon_wdt_calc_parameters(t);
+
+	for_each_online_cpu(cpu) {
+		coreid = cpu2core(cpu);
+		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
+		ciu_wdog.u64 = 0;
+		ciu_wdog.s.len = timeout_cnt;
+		ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
+		cvmx_write_csr(CVMX_CIU_WDOGX(coreid), ciu_wdog.u64);
+		cvmx_write_csr(CVMX_CIU_PP_POKEX(coreid), 1);
+	}
+	octeon_wdt_ping(); /* Get the irqs back on. */
+	return 0;
+}
+
+/**
+ *	octeon_wdt_write:
+ *	@file: file handle to the watchdog
+ *	@buf: buffer to write (unused as data does not matter here
+ *	@count: count of bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t octeon_wdt_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 1;
+			}
+		}
+		octeon_wdt_ping();
+	}
+	return count;
+}
+
+/**
+ *	octeon_wdt_ioctl:
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all
+ *	watchdogs according to their available features. We only
+ *	actually usefully support querying capabilities and setting
+ *	the timeout.
+ */
+
+static long octeon_wdt_ioctl(struct file *file, unsigned int cmd,
+			     unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_heartbeat;
+
+	static struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT|
+					WDIOF_MAGICCLOSE|
+					WDIOF_KEEPALIVEPING,
+		.firmware_version =	1,
+		.identity =		"OCTEON",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		octeon_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (octeon_wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		/* Fall through. */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/**
+ *	octeon_wdt_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	The watchdog device has been opened. The watchdog device is single
+ *	open and on opening we do a ping to reset the counters.
+ */
+
+static int octeon_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &octeon_wdt_is_open))
+		return -EBUSY;
+	/*
+	 *	Activate
+	 */
+	octeon_wdt_ping();
+	do_coundown = 1;
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	octeon_wdt_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The watchdog has a configurable API. There is a religious dispute
+ *	between people who want their watchdog to be able to shut down and
+ *	those who want to be sure if the watchdog manager dies the machine
+ *	reboots. In the former case we disable the counters, in the latter
+ *	case you have to open it again very soon.
+ */
+
+static int octeon_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close) {
+		do_coundown = 0;
+		octeon_wdt_ping();
+	} else {
+		pr_crit("octeon_wdt: WDT device closed unexpectedly.  WDT will not stop!\n");
+	}
+	clear_bit(0, &octeon_wdt_is_open);
+	expect_close = 0;
+	return 0;
+}
+
+static const struct file_operations octeon_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= octeon_wdt_write,
+	.unlocked_ioctl	= octeon_wdt_ioctl,
+	.open		= octeon_wdt_open,
+	.release	= octeon_wdt_release,
+};
+
+static struct miscdevice octeon_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &octeon_wdt_fops,
+};
+
+static struct notifier_block octeon_wdt_cpu_notifier = {
+	.notifier_call = octeon_wdt_cpu_callback,
+};
+
+
+/**
+ * Module/ driver initialization.
+ *
+ * Returns Zero on success
+ */
+static int __init octeon_wdt_init(void)
+{
+	int i;
+	int ret;
+	int cpu;
+	u64 *ptr;
+
+	/*
+	 * Watchdog time expiration length = The 16 bits of LEN
+	 * represent the most significant bits of a 24 bit decrementer
+	 * that decrements every 256 cycles.
+	 *
+	 * Try for a timeout of 5 sec, if that fails a smaller number
+	 * of even seconds,
+	 */
+	max_timeout_sec = 6;
+	do {
+		max_timeout_sec--;
+		timeout_cnt = ((octeon_get_clock_rate() >> 8) * max_timeout_sec) >> 8;
+	} while (timeout_cnt > 65535);
+
+	BUG_ON(timeout_cnt == 0);
+
+	octeon_wdt_calc_parameters(heartbeat);
+
+	pr_info("octeon_wdt: Initial granularity %d Sec.\n", timeout_sec);
+
+	ret = misc_register(&octeon_wdt_miscdev);
+	if (ret) {
+		pr_err("octeon_wdt: cannot register miscdev on minor=%d (err=%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto out;
+	}
+
+	/* Build the NMI handler ... */
+	octeon_wdt_build_stage1();
+
+	/* ... and install it. */
+	ptr = (u64 *) nmi_stage1_insns;
+	for (i = 0; i < 16; i++) {
+		cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8);
+		cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, ptr[i]);
+	}
+	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000);
+
+	cpumask_clear(&irq_enabled_cpus);
+
+	for_each_online_cpu(cpu)
+		octeon_wdt_setup_interrupt(cpu);
+
+	register_hotcpu_notifier(&octeon_wdt_cpu_notifier);
+out:
+	return ret;
+}
+
+/**
+ * Module / driver shutdown
+ */
+static void __exit octeon_wdt_cleanup(void)
+{
+	int cpu;
+
+	misc_deregister(&octeon_wdt_miscdev);
+
+	unregister_hotcpu_notifier(&octeon_wdt_cpu_notifier);
+
+	for_each_online_cpu(cpu) {
+		int core = cpu2core(cpu);
+		/* Disable the watchdog */
+		cvmx_write_csr(CVMX_CIU_WDOGX(core), 0);
+		/* Free the interrupt handler */
+		free_irq(OCTEON_IRQ_WDOG0 + core, octeon_wdt_poke_irq);
+	}
+	/*
+	 * Disable the boot-bus memory, the code it points to is soon
+	 * to go missing.
+	 */
+	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
+MODULE_DESCRIPTION("Cavium Networks Octeon Watchdog driver.");
+module_init(octeon_wdt_init);
+module_exit(octeon_wdt_cleanup);
diff --git a/drivers/watchdog/octeon-wdt-nmi.S b/drivers/watchdog/octeon-wdt-nmi.S
new file mode 100644
index 00000000000..8a900a5e323
--- /dev/null
+++ b/drivers/watchdog/octeon-wdt-nmi.S
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Cavium Networks
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define SAVE_REG(r)	sd $r, -32768+6912-(32-r)*8($0)
+
+        NESTED(octeon_wdt_nmi_stage2, 0, sp)
+	.set 	push
+	.set 	noreorder
+	.set 	noat
+	/* Save all registers to the top CVMSEG. This shouldn't
+	 * corrupt any state used by the kernel. Also all registers
+	 * should have the value right before the NMI. */
+	SAVE_REG(0)
+	SAVE_REG(1)
+	SAVE_REG(2)
+	SAVE_REG(3)
+	SAVE_REG(4)
+	SAVE_REG(5)
+	SAVE_REG(6)
+	SAVE_REG(7)
+	SAVE_REG(8)
+	SAVE_REG(9)
+	SAVE_REG(10)
+	SAVE_REG(11)
+	SAVE_REG(12)
+	SAVE_REG(13)
+	SAVE_REG(14)
+	SAVE_REG(15)
+	SAVE_REG(16)
+	SAVE_REG(17)
+	SAVE_REG(18)
+	SAVE_REG(19)
+	SAVE_REG(20)
+	SAVE_REG(21)
+	SAVE_REG(22)
+	SAVE_REG(23)
+	SAVE_REG(24)
+	SAVE_REG(25)
+	SAVE_REG(26)
+	SAVE_REG(27)
+	SAVE_REG(28)
+	SAVE_REG(29)
+	SAVE_REG(30)
+	SAVE_REG(31)
+	/* Set the stack to begin right below the registers */
+	li	sp, -32768+6912-32*8
+	/* Load the address of the third stage handler */
+	dla	a0, octeon_wdt_nmi_stage3
+	/* Call the third stage handler */
+	jal	a0
+	/* a0 is the address of the saved registers */
+	 move	a0, sp
+	/* Loop forvever if we get here. */
+1:	b	1b
+	nop
+	.set pop
+	END(octeon_wdt_nmi_stage2)
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index 5dceeddc885..4082b4ace1f 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -250,12 +250,12 @@ static struct of_platform_driver riowd_driver = {
 
 static int __init riowd_init(void)
 {
-	return of_register_driver(&riowd_driver, &of_bus_type);
+	return of_register_platform_driver(&riowd_driver);
 }
 
 static void __exit riowd_exit(void)
 {
-	of_unregister_driver(&riowd_driver);
+	of_unregister_platform_driver(&riowd_driver);
 }
 
 module_init(riowd_init);
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index fad3df2c127..0a882693663 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -62,4 +62,13 @@ config XEN_SYS_HYPERVISOR
 	 virtual environment, /sys/hypervisor will still be present,
 	 but will have no xen contents.
 
+config XEN_PLATFORM_PCI
+	tristate "xen platform pci device driver"
+	depends on XEN_PVHVM
+	default m
+	help
+	  Driver for the Xen PCI Platform device: it is responsible for
+	  initializing xenbus and grant_table when running in a Xen HVM
+	  domain. As a consequence this driver is required to run any Xen PV
+	  frontend on Xen HVM.
 endmenu
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 7c284342f30..e392fb776af 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -9,4 +9,5 @@ obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
 obj-$(CONFIG_XEN_BALLOON)	+= balloon.o
 obj-$(CONFIG_XEN_DEV_EVTCHN)	+= evtchn.o
 obj-$(CONFIG_XENFS)		+= xenfs/
-obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
\ No newline at end of file
+obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
+obj-$(CONFIG_XEN_PLATFORM_PCI)	+= platform-pci.o
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index db8f506817f..72f91bff29c 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -29,6 +29,7 @@
 #include <linux/bootmem.h>
 #include <linux/slab.h>
 
+#include <asm/desc.h>
 #include <asm/ptrace.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
@@ -36,10 +37,14 @@
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
 
+#include <xen/xen.h>
+#include <xen/hvm.h>
 #include <xen/xen-ops.h>
 #include <xen/events.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/event_channel.h>
+#include <xen/interface/hvm/hvm_op.h>
+#include <xen/interface/hvm/params.h>
 
 /*
  * This lock protects updates to the following mapping and reference-count
@@ -335,9 +340,18 @@ static int find_unbound_irq(void)
 	int irq;
 	struct irq_desc *desc;
 
-	for (irq = 0; irq < nr_irqs; irq++)
+	for (irq = 0; irq < nr_irqs; irq++) {
+		desc = irq_to_desc(irq);
+		/* only 0->15 have init'd desc; handle irq > 16 */
+		if (desc == NULL)
+			break;
+		if (desc->chip == &no_irq_chip)
+			break;
+		if (desc->chip != &xen_dynamic_chip)
+			continue;
 		if (irq_info[irq].type == IRQT_UNBOUND)
 			break;
+	}
 
 	if (irq == nr_irqs)
 		panic("No available IRQ to bind to: increase nr_irqs!\n");
@@ -346,7 +360,7 @@ static int find_unbound_irq(void)
 	if (WARN_ON(desc == NULL))
 		return -1;
 
-	dynamic_irq_init(irq);
+	dynamic_irq_init_keep_chip_data(irq);
 
 	return irq;
 }
@@ -536,6 +550,7 @@ int bind_ipi_to_irqhandler(enum ipi_vector ipi,
 	if (irq < 0)
 		return irq;
 
+	irqflags |= IRQF_NO_SUSPEND;
 	retval = request_irq(irq, handler, irqflags, devname, dev_id);
 	if (retval != 0) {
 		unbind_from_irq(irq);
@@ -617,17 +632,13 @@ static DEFINE_PER_CPU(unsigned, xed_nesting_count);
  * a bitset of words which contain pending event bits.  The second
  * level is a bitset of pending events themselves.
  */
-void xen_evtchn_do_upcall(struct pt_regs *regs)
+static void __xen_evtchn_do_upcall(void)
 {
 	int cpu = get_cpu();
-	struct pt_regs *old_regs = set_irq_regs(regs);
 	struct shared_info *s = HYPERVISOR_shared_info;
 	struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
  	unsigned count;
 
-	exit_idle();
-	irq_enter();
-
 	do {
 		unsigned long pending_words;
 
@@ -664,14 +675,31 @@ void xen_evtchn_do_upcall(struct pt_regs *regs)
 
 		count = __get_cpu_var(xed_nesting_count);
 		__get_cpu_var(xed_nesting_count) = 0;
-	} while(count != 1);
+	} while (count != 1 || vcpu_info->evtchn_upcall_pending);
 
 out:
+
+	put_cpu();
+}
+
+void xen_evtchn_do_upcall(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	exit_idle();
+	irq_enter();
+
+	__xen_evtchn_do_upcall();
+
 	irq_exit();
 	set_irq_regs(old_regs);
+}
 
-	put_cpu();
+void xen_hvm_evtchn_do_upcall(void)
+{
+	__xen_evtchn_do_upcall();
 }
+EXPORT_SYMBOL_GPL(xen_hvm_evtchn_do_upcall);
 
 /* Rebind a new event channel to an existing irq. */
 void rebind_evtchn_irq(int evtchn, int irq)
@@ -708,7 +736,10 @@ static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
 	struct evtchn_bind_vcpu bind_vcpu;
 	int evtchn = evtchn_from_irq(irq);
 
-	if (!VALID_EVTCHN(evtchn))
+	/* events delivered via platform PCI interrupts are always
+	 * routed to vcpu 0 */
+	if (!VALID_EVTCHN(evtchn) ||
+		(xen_hvm_domain() && !xen_have_vector_callback))
 		return -1;
 
 	/* Send future instances of this interrupt to other vcpu. */
@@ -933,6 +964,44 @@ static struct irq_chip xen_dynamic_chip __read_mostly = {
 	.retrigger	= retrigger_dynirq,
 };
 
+int xen_set_callback_via(uint64_t via)
+{
+	struct xen_hvm_param a;
+	a.domid = DOMID_SELF;
+	a.index = HVM_PARAM_CALLBACK_IRQ;
+	a.value = via;
+	return HYPERVISOR_hvm_op(HVMOP_set_param, &a);
+}
+EXPORT_SYMBOL_GPL(xen_set_callback_via);
+
+#ifdef CONFIG_XEN_PVHVM
+/* Vector callbacks are better than PCI interrupts to receive event
+ * channel notifications because we can receive vector callbacks on any
+ * vcpu and we don't need PCI support or APIC interactions. */
+void xen_callback_vector(void)
+{
+	int rc;
+	uint64_t callback_via;
+	if (xen_have_vector_callback) {
+		callback_via = HVM_CALLBACK_VECTOR(XEN_HVM_EVTCHN_CALLBACK);
+		rc = xen_set_callback_via(callback_via);
+		if (rc) {
+			printk(KERN_ERR "Request for Xen HVM callback vector"
+					" failed.\n");
+			xen_have_vector_callback = 0;
+			return;
+		}
+		printk(KERN_INFO "Xen HVM callback vector for event delivery is "
+				"enabled\n");
+		/* in the restore case the vector has already been allocated */
+		if (!test_bit(XEN_HVM_EVTCHN_CALLBACK, used_vectors))
+			alloc_intr_gate(XEN_HVM_EVTCHN_CALLBACK, xen_hvm_callback_vector);
+	}
+}
+#else
+void xen_callback_vector(void) {}
+#endif
+
 void __init xen_init_IRQ(void)
 {
 	int i;
@@ -947,5 +1016,10 @@ void __init xen_init_IRQ(void)
 	for (i = 0; i < NR_EVENT_CHANNELS; i++)
 		mask_evtchn(i);
 
-	irq_ctx_init(smp_processor_id());
+	if (xen_hvm_domain()) {
+		xen_callback_vector();
+		native_init_IRQ();
+	} else {
+		irq_ctx_init(smp_processor_id());
+	}
 }
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index f66db3b91d6..6c453181649 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -37,11 +37,13 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 
 #include <xen/xen.h>
 #include <xen/interface/xen.h>
 #include <xen/page.h>
 #include <xen/grant_table.h>
+#include <xen/interface/memory.h>
 #include <asm/xen/hypercall.h>
 
 #include <asm/pgtable.h>
@@ -59,6 +61,8 @@ static unsigned int boot_max_nr_grant_frames;
 static int gnttab_free_count;
 static grant_ref_t gnttab_free_head;
 static DEFINE_SPINLOCK(gnttab_list_lock);
+unsigned long xen_hvm_resume_frames;
+EXPORT_SYMBOL_GPL(xen_hvm_resume_frames);
 
 static struct grant_entry *shared;
 
@@ -433,7 +437,7 @@ static unsigned int __max_nr_grant_frames(void)
 	return query.max_nr_frames;
 }
 
-static inline unsigned int max_nr_grant_frames(void)
+unsigned int gnttab_max_grant_frames(void)
 {
 	unsigned int xen_max = __max_nr_grant_frames();
 
@@ -441,6 +445,7 @@ static inline unsigned int max_nr_grant_frames(void)
 		return boot_max_nr_grant_frames;
 	return xen_max;
 }
+EXPORT_SYMBOL_GPL(gnttab_max_grant_frames);
 
 static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
 {
@@ -449,6 +454,30 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
 	unsigned int nr_gframes = end_idx + 1;
 	int rc;
 
+	if (xen_hvm_domain()) {
+		struct xen_add_to_physmap xatp;
+		unsigned int i = end_idx;
+		rc = 0;
+		/*
+		 * Loop backwards, so that the first hypercall has the largest
+		 * index, ensuring that the table will grow only once.
+		 */
+		do {
+			xatp.domid = DOMID_SELF;
+			xatp.idx = i;
+			xatp.space = XENMAPSPACE_grant_table;
+			xatp.gpfn = (xen_hvm_resume_frames >> PAGE_SHIFT) + i;
+			rc = HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp);
+			if (rc != 0) {
+				printk(KERN_WARNING
+						"grant table add_to_physmap failed, err=%d\n", rc);
+				break;
+			}
+		} while (i-- > start_idx);
+
+		return rc;
+	}
+
 	frames = kmalloc(nr_gframes * sizeof(unsigned long), GFP_ATOMIC);
 	if (!frames)
 		return -ENOMEM;
@@ -465,7 +494,7 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
 
 	BUG_ON(rc || setup.status);
 
-	rc = arch_gnttab_map_shared(frames, nr_gframes, max_nr_grant_frames(),
+	rc = arch_gnttab_map_shared(frames, nr_gframes, gnttab_max_grant_frames(),
 				    &shared);
 	BUG_ON(rc);
 
@@ -476,9 +505,27 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx)
 
 int gnttab_resume(void)
 {
-	if (max_nr_grant_frames() < nr_grant_frames)
+	unsigned int max_nr_gframes;
+
+	max_nr_gframes = gnttab_max_grant_frames();
+	if (max_nr_gframes < nr_grant_frames)
 		return -ENOSYS;
-	return gnttab_map(0, nr_grant_frames - 1);
+
+	if (xen_pv_domain())
+		return gnttab_map(0, nr_grant_frames - 1);
+
+	if (!shared) {
+		shared = ioremap(xen_hvm_resume_frames, PAGE_SIZE * max_nr_gframes);
+		if (shared == NULL) {
+			printk(KERN_WARNING
+					"Failed to ioremap gnttab share frames!");
+			return -ENOMEM;
+		}
+	}
+
+	gnttab_map(0, nr_grant_frames - 1);
+
+	return 0;
 }
 
 int gnttab_suspend(void)
@@ -495,7 +542,7 @@ static int gnttab_expand(unsigned int req_entries)
 	cur = nr_grant_frames;
 	extra = ((req_entries + (GREFS_PER_GRANT_FRAME-1)) /
 		 GREFS_PER_GRANT_FRAME);
-	if (cur + extra > max_nr_grant_frames())
+	if (cur + extra > gnttab_max_grant_frames())
 		return -ENOSPC;
 
 	rc = gnttab_map(cur, cur + extra - 1);
@@ -505,15 +552,12 @@ static int gnttab_expand(unsigned int req_entries)
 	return rc;
 }
 
-static int __devinit gnttab_init(void)
+int gnttab_init(void)
 {
 	int i;
 	unsigned int max_nr_glist_frames, nr_glist_frames;
 	unsigned int nr_init_grefs;
 
-	if (!xen_domain())
-		return -ENODEV;
-
 	nr_grant_frames = 1;
 	boot_max_nr_grant_frames = __max_nr_grant_frames();
 
@@ -556,5 +600,18 @@ static int __devinit gnttab_init(void)
 	kfree(gnttab_list);
 	return -ENOMEM;
 }
+EXPORT_SYMBOL_GPL(gnttab_init);
+
+static int __devinit __gnttab_init(void)
+{
+	/* Delay grant-table initialization in the PV on HVM case */
+	if (xen_hvm_domain())
+		return 0;
+
+	if (!xen_pv_domain())
+		return -ENODEV;
+
+	return gnttab_init();
+}
 
-core_initcall(gnttab_init);
+core_initcall(__gnttab_init);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 07e857b0de1..1799bd89031 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -9,6 +9,7 @@
 #include <linux/stop_machine.h>
 #include <linux/freezer.h>
 
+#include <xen/xen.h>
 #include <xen/xenbus.h>
 #include <xen/grant_table.h>
 #include <xen/events.h>
@@ -17,6 +18,7 @@
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/page.h>
+#include <asm/xen/hypervisor.h>
 
 enum shutdown_state {
 	SHUTDOWN_INVALID = -1,
@@ -33,10 +35,30 @@ enum shutdown_state {
 static enum shutdown_state shutting_down = SHUTDOWN_INVALID;
 
 #ifdef CONFIG_PM_SLEEP
-static int xen_suspend(void *data)
+static int xen_hvm_suspend(void *data)
 {
+	struct sched_shutdown r = { .reason = SHUTDOWN_suspend };
 	int *cancelled = data;
+
+	BUG_ON(!irqs_disabled());
+
+	*cancelled = HYPERVISOR_sched_op(SCHEDOP_shutdown, &r);
+
+	xen_hvm_post_suspend(*cancelled);
+	gnttab_resume();
+
+	if (!*cancelled) {
+		xen_irq_resume();
+		xen_timer_resume();
+	}
+
+	return 0;
+}
+
+static int xen_suspend(void *data)
+{
 	int err;
+	int *cancelled = data;
 
 	BUG_ON(!irqs_disabled());
 
@@ -106,7 +128,10 @@ static void do_suspend(void)
 		goto out_resume;
 	}
 
-	err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
+	if (xen_hvm_domain())
+		err = stop_machine(xen_hvm_suspend, &cancelled, cpumask_of(0));
+	else
+		err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
 
 	dpm_resume_noirq(PMSG_RESUME);
 
@@ -255,7 +280,19 @@ static int shutdown_event(struct notifier_block *notifier,
 	return NOTIFY_DONE;
 }
 
-static int __init setup_shutdown_event(void)
+static int __init __setup_shutdown_event(void)
+{
+	/* Delay initialization in the PV on HVM case */
+	if (xen_hvm_domain())
+		return 0;
+
+	if (!xen_pv_domain())
+		return -ENODEV;
+
+	return xen_setup_shutdown_event();
+}
+
+int xen_setup_shutdown_event(void)
 {
 	static struct notifier_block xenstore_notifier = {
 		.notifier_call = shutdown_event
@@ -264,5 +301,6 @@ static int __init setup_shutdown_event(void)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(xen_setup_shutdown_event);
 
-subsys_initcall(setup_shutdown_event);
+subsys_initcall(__setup_shutdown_event);
diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c
new file mode 100644
index 00000000000..c01b5ddce52
--- /dev/null
+++ b/drivers/xen/platform-pci.c
@@ -0,0 +1,207 @@
+/******************************************************************************
+ * platform-pci.c
+ *
+ * Xen platform PCI device driver
+ * Copyright (c) 2005, Intel Corporation.
+ * Copyright (c) 2007, XenSource Inc.
+ * Copyright (c) 2010, Citrix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <xen/platform_pci.h>
+#include <xen/grant_table.h>
+#include <xen/xenbus.h>
+#include <xen/events.h>
+#include <xen/hvm.h>
+#include <xen/xen-ops.h>
+
+#define DRV_NAME    "xen-platform-pci"
+
+MODULE_AUTHOR("ssmith@xensource.com and stefano.stabellini@eu.citrix.com");
+MODULE_DESCRIPTION("Xen platform PCI device");
+MODULE_LICENSE("GPL");
+
+static unsigned long platform_mmio;
+static unsigned long platform_mmio_alloc;
+static unsigned long platform_mmiolen;
+static uint64_t callback_via;
+
+unsigned long alloc_xen_mmio(unsigned long len)
+{
+	unsigned long addr;
+
+	addr = platform_mmio + platform_mmio_alloc;
+	platform_mmio_alloc += len;
+	BUG_ON(platform_mmio_alloc > platform_mmiolen);
+
+	return addr;
+}
+
+static uint64_t get_callback_via(struct pci_dev *pdev)
+{
+	u8 pin;
+	int irq;
+
+	irq = pdev->irq;
+	if (irq < 16)
+		return irq; /* ISA IRQ */
+
+	pin = pdev->pin;
+
+	/* We don't know the GSI. Specify the PCI INTx line instead. */
+	return ((uint64_t)0x01 << 56) | /* PCI INTx identifier */
+		((uint64_t)pci_domain_nr(pdev->bus) << 32) |
+		((uint64_t)pdev->bus->number << 16) |
+		((uint64_t)(pdev->devfn & 0xff) << 8) |
+		((uint64_t)(pin - 1) & 3);
+}
+
+static irqreturn_t do_hvm_evtchn_intr(int irq, void *dev_id)
+{
+	xen_hvm_evtchn_do_upcall();
+	return IRQ_HANDLED;
+}
+
+static int xen_allocate_irq(struct pci_dev *pdev)
+{
+	return request_irq(pdev->irq, do_hvm_evtchn_intr,
+			IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+			"xen-platform-pci", pdev);
+}
+
+static int platform_pci_resume(struct pci_dev *pdev)
+{
+	int err;
+	if (xen_have_vector_callback)
+		return 0;
+	err = xen_set_callback_via(callback_via);
+	if (err) {
+		dev_err(&pdev->dev, "platform_pci_resume failure!\n");
+		return err;
+	}
+	return 0;
+}
+
+static int __devinit platform_pci_init(struct pci_dev *pdev,
+				       const struct pci_device_id *ent)
+{
+	int i, ret;
+	long ioaddr, iolen;
+	long mmio_addr, mmio_len;
+	unsigned int max_nr_gframes;
+
+	i = pci_enable_device(pdev);
+	if (i)
+		return i;
+
+	ioaddr = pci_resource_start(pdev, 0);
+	iolen = pci_resource_len(pdev, 0);
+
+	mmio_addr = pci_resource_start(pdev, 1);
+	mmio_len = pci_resource_len(pdev, 1);
+
+	if (mmio_addr == 0 || ioaddr == 0) {
+		dev_err(&pdev->dev, "no resources found\n");
+		ret = -ENOENT;
+		goto pci_out;
+	}
+
+	if (request_mem_region(mmio_addr, mmio_len, DRV_NAME) == NULL) {
+		dev_err(&pdev->dev, "MEM I/O resource 0x%lx @ 0x%lx busy\n",
+		       mmio_addr, mmio_len);
+		ret = -EBUSY;
+		goto pci_out;
+	}
+
+	if (request_region(ioaddr, iolen, DRV_NAME) == NULL) {
+		dev_err(&pdev->dev, "I/O resource 0x%lx @ 0x%lx busy\n",
+		       iolen, ioaddr);
+		ret = -EBUSY;
+		goto mem_out;
+	}
+
+	platform_mmio = mmio_addr;
+	platform_mmiolen = mmio_len;
+
+	if (!xen_have_vector_callback) {
+		ret = xen_allocate_irq(pdev);
+		if (ret) {
+			dev_warn(&pdev->dev, "request_irq failed err=%d\n", ret);
+			goto out;
+		}
+		callback_via = get_callback_via(pdev);
+		ret = xen_set_callback_via(callback_via);
+		if (ret) {
+			dev_warn(&pdev->dev, "Unable to set the evtchn callback "
+					 "err=%d\n", ret);
+			goto out;
+		}
+	}
+
+	max_nr_gframes = gnttab_max_grant_frames();
+	xen_hvm_resume_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes);
+	ret = gnttab_init();
+	if (ret)
+		goto out;
+	xenbus_probe(NULL);
+	ret = xen_setup_shutdown_event();
+	if (ret)
+		goto out;
+	return 0;
+
+out:
+	release_region(ioaddr, iolen);
+mem_out:
+	release_mem_region(mmio_addr, mmio_len);
+pci_out:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static struct pci_device_id platform_pci_tbl[] __devinitdata = {
+	{PCI_VENDOR_ID_XEN, PCI_DEVICE_ID_XEN_PLATFORM,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, platform_pci_tbl);
+
+static struct pci_driver platform_driver = {
+	.name =           DRV_NAME,
+	.probe =          platform_pci_init,
+	.id_table =       platform_pci_tbl,
+#ifdef CONFIG_PM
+	.resume_early =   platform_pci_resume,
+#endif
+};
+
+static int __init platform_pci_module_init(void)
+{
+	/* no unplug has been done, IGNORE hasn't been specified: just
+	 * return now */
+	if (!xen_platform_pci_unplug)
+		return -ENODEV;
+
+	return pci_register_driver(&platform_driver);
+}
+
+module_init(platform_pci_module_init);
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 3479332113e..29bac511887 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -56,6 +56,9 @@
 #include <xen/events.h>
 #include <xen/page.h>
 
+#include <xen/platform_pci.h>
+#include <xen/hvm.h>
+
 #include "xenbus_comms.h"
 #include "xenbus_probe.h"
 
@@ -752,10 +755,7 @@ int register_xenstore_notifier(struct notifier_block *nb)
 {
 	int ret = 0;
 
-	if (xenstored_ready > 0)
-		ret = nb->notifier_call(nb, 0, NULL);
-	else
-		blocking_notifier_chain_register(&xenstore_chain, nb);
+	blocking_notifier_chain_register(&xenstore_chain, nb);
 
 	return ret;
 }
@@ -779,8 +779,23 @@ void xenbus_probe(struct work_struct *unused)
 	/* Notify others that xenstore is up */
 	blocking_notifier_call_chain(&xenstore_chain, 0, NULL);
 }
+EXPORT_SYMBOL_GPL(xenbus_probe);
+
+static int __init xenbus_probe_initcall(void)
+{
+	if (!xen_domain())
+		return -ENODEV;
+
+	if (xen_initial_domain() || xen_hvm_domain())
+		return 0;
+
+	xenbus_probe(NULL);
+	return 0;
+}
+
+device_initcall(xenbus_probe_initcall);
 
-static int __init xenbus_probe_init(void)
+static int __init xenbus_init(void)
 {
 	int err = 0;
 
@@ -805,11 +820,24 @@ static int __init xenbus_probe_init(void)
 	if (xen_initial_domain()) {
 		/* dom0 not yet supported */
 	} else {
+		if (xen_hvm_domain()) {
+			uint64_t v = 0;
+			err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v);
+			if (err)
+				goto out_error;
+			xen_store_evtchn = (int)v;
+			err = hvm_get_parameter(HVM_PARAM_STORE_PFN, &v);
+			if (err)
+				goto out_error;
+			xen_store_mfn = (unsigned long)v;
+			xen_store_interface = ioremap(xen_store_mfn << PAGE_SHIFT, PAGE_SIZE);
+		} else {
+			xen_store_evtchn = xen_start_info->store_evtchn;
+			xen_store_mfn = xen_start_info->store_mfn;
+			xen_store_interface = mfn_to_virt(xen_store_mfn);
+		}
 		xenstored_ready = 1;
-		xen_store_evtchn = xen_start_info->store_evtchn;
-		xen_store_mfn = xen_start_info->store_mfn;
 	}
-	xen_store_interface = mfn_to_virt(xen_store_mfn);
 
 	/* Initialize the interface to xenstore. */
 	err = xs_init();
@@ -819,9 +847,6 @@ static int __init xenbus_probe_init(void)
 		goto out_unreg_back;
 	}
 
-	if (!xen_initial_domain())
-		xenbus_probe(NULL);
-
 #ifdef CONFIG_XEN_COMPAT_XENFS
 	/*
 	 * Create xenfs mountpoint in /proc for compatibility with
@@ -842,7 +867,7 @@ static int __init xenbus_probe_init(void)
 	return err;
 }
 
-postcore_initcall(xenbus_probe_init);
+postcore_initcall(xenbus_init);
 
 MODULE_LICENSE("GPL");
 
@@ -950,6 +975,9 @@ static void wait_for_devices(struct xenbus_driver *xendrv)
 #ifndef MODULE
 static int __init boot_wait_for_devices(void)
 {
+	if (xen_hvm_domain() && !xen_platform_pci_unplug)
+		return -ENODEV;
+
 	ready_to_wait_for_devices = 1;
 	wait_for_devices(NULL);
 	return 0;
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 7b547f53f65..5534690075a 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -76,6 +76,14 @@ struct xs_handle {
 	/*
 	 * Mutex ordering: transaction_mutex -> watch_mutex -> request_mutex.
 	 * response_mutex is never taken simultaneously with the other three.
+	 *
+	 * transaction_mutex must be held before incrementing
+	 * transaction_count. The mutex is held when a suspend is in
+	 * progress to prevent new transactions starting.
+	 *
+	 * When decrementing transaction_count to zero the wait queue
+	 * should be woken up, the suspend code waits for count to
+	 * reach zero.
 	 */
 
 	/* One request at a time. */
@@ -85,7 +93,9 @@ struct xs_handle {
 	struct mutex response_mutex;
 
 	/* Protect transactions against save/restore. */
-	struct rw_semaphore transaction_mutex;
+	struct mutex transaction_mutex;
+	atomic_t transaction_count;
+	wait_queue_head_t transaction_wq;
 
 	/* Protect watch (de)register against save/restore. */
 	struct rw_semaphore watch_mutex;
@@ -157,6 +167,31 @@ static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
 	return body;
 }
 
+static void transaction_start(void)
+{
+	mutex_lock(&xs_state.transaction_mutex);
+	atomic_inc(&xs_state.transaction_count);
+	mutex_unlock(&xs_state.transaction_mutex);
+}
+
+static void transaction_end(void)
+{
+	if (atomic_dec_and_test(&xs_state.transaction_count))
+		wake_up(&xs_state.transaction_wq);
+}
+
+static void transaction_suspend(void)
+{
+	mutex_lock(&xs_state.transaction_mutex);
+	wait_event(xs_state.transaction_wq,
+		   atomic_read(&xs_state.transaction_count) == 0);
+}
+
+static void transaction_resume(void)
+{
+	mutex_unlock(&xs_state.transaction_mutex);
+}
+
 void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
 {
 	void *ret;
@@ -164,7 +199,7 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
 	int err;
 
 	if (req_msg.type == XS_TRANSACTION_START)
-		down_read(&xs_state.transaction_mutex);
+		transaction_start();
 
 	mutex_lock(&xs_state.request_mutex);
 
@@ -180,7 +215,7 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
 	if ((msg->type == XS_TRANSACTION_END) ||
 	    ((req_msg.type == XS_TRANSACTION_START) &&
 	     (msg->type == XS_ERROR)))
-		up_read(&xs_state.transaction_mutex);
+		transaction_end();
 
 	return ret;
 }
@@ -432,11 +467,11 @@ int xenbus_transaction_start(struct xenbus_transaction *t)
 {
 	char *id_str;
 
-	down_read(&xs_state.transaction_mutex);
+	transaction_start();
 
 	id_str = xs_single(XBT_NIL, XS_TRANSACTION_START, "", NULL);
 	if (IS_ERR(id_str)) {
-		up_read(&xs_state.transaction_mutex);
+		transaction_end();
 		return PTR_ERR(id_str);
 	}
 
@@ -461,7 +496,7 @@ int xenbus_transaction_end(struct xenbus_transaction t, int abort)
 
 	err = xs_error(xs_single(t, XS_TRANSACTION_END, abortstr, NULL));
 
-	up_read(&xs_state.transaction_mutex);
+	transaction_end();
 
 	return err;
 }
@@ -662,7 +697,7 @@ EXPORT_SYMBOL_GPL(unregister_xenbus_watch);
 
 void xs_suspend(void)
 {
-	down_write(&xs_state.transaction_mutex);
+	transaction_suspend();
 	down_write(&xs_state.watch_mutex);
 	mutex_lock(&xs_state.request_mutex);
 	mutex_lock(&xs_state.response_mutex);
@@ -677,7 +712,7 @@ void xs_resume(void)
 
 	mutex_unlock(&xs_state.response_mutex);
 	mutex_unlock(&xs_state.request_mutex);
-	up_write(&xs_state.transaction_mutex);
+	transaction_resume();
 
 	/* No need for watches_lock: the watch_mutex is sufficient. */
 	list_for_each_entry(watch, &watches, list) {
@@ -693,7 +728,7 @@ void xs_suspend_cancel(void)
 	mutex_unlock(&xs_state.response_mutex);
 	mutex_unlock(&xs_state.request_mutex);
 	up_write(&xs_state.watch_mutex);
-	up_write(&xs_state.transaction_mutex);
+	mutex_unlock(&xs_state.transaction_mutex);
 }
 
 static int xenwatch_thread(void *unused)
@@ -843,8 +878,10 @@ int xs_init(void)
 
 	mutex_init(&xs_state.request_mutex);
 	mutex_init(&xs_state.response_mutex);
-	init_rwsem(&xs_state.transaction_mutex);
+	mutex_init(&xs_state.transaction_mutex);
 	init_rwsem(&xs_state.watch_mutex);
+	atomic_set(&xs_state.transaction_count, 0);
+	init_waitqueue_head(&xs_state.transaction_wq);
 
 	/* Initialize the shared memory rings to talk to xenstored */
 	err = xb_init_comms();
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index 8924d93136f..78bfab0700b 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -65,7 +65,7 @@ static struct file_system_type xenfs_type = {
 
 static int __init xenfs_init(void)
 {
-	if (xen_pv_domain())
+	if (xen_domain())
 		return register_filesystem(&xenfs_type);
 
 	printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n");
@@ -74,7 +74,7 @@ static int __init xenfs_init(void)
 
 static void __exit xenfs_exit(void)
 {
-	if (xen_pv_domain())
+	if (xen_domain())
 		unregister_filesystem(&xenfs_type);
 }
 
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index f28ece39736..3b39c3752e2 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -124,6 +124,9 @@ static ssize_t xenbus_file_read(struct file *filp,
 	mutex_lock(&u->reply_mutex);
 	while (list_empty(&u->read_buffers)) {
 		mutex_unlock(&u->reply_mutex);
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+
 		ret = wait_event_interruptible(u->read_waitq,
 					       !list_empty(&u->read_buffers));
 		if (ret)
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
index 5c4e61d3c77..8f975f25b48 100644
--- a/fs/afs/Kconfig
+++ b/fs/afs/Kconfig
@@ -2,6 +2,7 @@ config AFS_FS
 	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
 	depends on INET && EXPERIMENTAL
 	select AF_RXRPC
+	select DNS_RESOLVER
 	help
 	  If you say Y here, you will get an experimental Andrew File System
 	  driver. It currently only supports unsecured read-only AFS access.
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index e19c13f059e..ffea35c6387 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/key.h>
 #include <linux/ctype.h>
+#include <linux/dns_resolver.h>
 #include <linux/sched.h>
 #include <keys/rxrpc-type.h>
 #include "internal.h"
@@ -36,6 +37,8 @@ static struct afs_cell *afs_cell_alloc(const char *name, char *vllist)
 	struct key *key;
 	size_t namelen;
 	char keyname[4 + AFS_MAXCELLNAME + 1], *cp, *dp, *next;
+	char  *dvllist = NULL, *_vllist = NULL;
+	char  delimiter = ':';
 	int ret;
 
 	_enter("%s,%s", name, vllist);
@@ -43,8 +46,10 @@ static struct afs_cell *afs_cell_alloc(const char *name, char *vllist)
 	BUG_ON(!name); /* TODO: want to look up "this cell" in the cache */
 
 	namelen = strlen(name);
-	if (namelen > AFS_MAXCELLNAME)
+	if (namelen > AFS_MAXCELLNAME) {
+		_leave(" = -ENAMETOOLONG");
 		return ERR_PTR(-ENAMETOOLONG);
+	}
 
 	/* allocate and initialise a cell record */
 	cell = kzalloc(sizeof(struct afs_cell) + namelen + 1, GFP_KERNEL);
@@ -64,15 +69,31 @@ static struct afs_cell *afs_cell_alloc(const char *name, char *vllist)
 	INIT_LIST_HEAD(&cell->vl_list);
 	spin_lock_init(&cell->vl_lock);
 
+	/* if the ip address is invalid, try dns query */
+	if (!vllist || strlen(vllist) < 7) {
+		ret = dns_query("afsdb", name, namelen, "ipv4", &dvllist, NULL);
+		if (ret < 0) {
+			_leave(" = %d", ret);
+			return ERR_PTR(ret);
+		}
+		_vllist = dvllist;
+
+		/* change the delimiter for user-space reply */
+		delimiter = ',';
+
+	} else {
+		_vllist = vllist;
+	}
+
 	/* fill in the VL server list from the rest of the string */
 	do {
 		unsigned a, b, c, d;
 
-		next = strchr(vllist, ':');
+		next = strchr(_vllist, delimiter);
 		if (next)
 			*next++ = 0;
 
-		if (sscanf(vllist, "%u.%u.%u.%u", &a, &b, &c, &d) != 4)
+		if (sscanf(_vllist, "%u.%u.%u.%u", &a, &b, &c, &d) != 4)
 			goto bad_address;
 
 		if (a > 255 || b > 255 || c > 255 || d > 255)
@@ -81,7 +102,7 @@ static struct afs_cell *afs_cell_alloc(const char *name, char *vllist)
 		cell->vl_addrs[cell->vl_naddrs++].s_addr =
 			htonl((a << 24) | (b << 16) | (c << 8) | d);
 
-	} while (cell->vl_naddrs < AFS_CELL_MAX_ADDRS && (vllist = next));
+	} while (cell->vl_naddrs < AFS_CELL_MAX_ADDRS && (_vllist = next));
 
 	/* create a key to represent an anonymous user */
 	memcpy(keyname, "afs@", 4);
@@ -110,6 +131,7 @@ bad_address:
 	ret = -EINVAL;
 error:
 	key_put(cell->anonymous_key);
+	kfree(dvllist);
 	kfree(cell);
 	_leave(" = %d", ret);
 	return ERR_PTR(ret);
@@ -201,14 +223,12 @@ int afs_cell_init(char *rootcell)
 	}
 
 	cp = strchr(rootcell, ':');
-	if (!cp) {
-		printk(KERN_ERR "kAFS: no VL server IP addresses specified\n");
-		_leave(" = -EINVAL");
-		return -EINVAL;
-	}
+	if (!cp)
+		_debug("kAFS: no VL server IP addresses specified");
+	else
+		*cp++ = 0;
 
 	/* allocate a cell record for the root cell */
-	*cp++ = 0;
 	new_root = afs_cell_create(rootcell, cp);
 	if (IS_ERR(new_root)) {
 		_leave(" = %ld", PTR_ERR(new_root));
diff --git a/fs/afs/main.c b/fs/afs/main.c
index 66d54d348c5..cfd1cbe25b2 100644
--- a/fs/afs/main.c
+++ b/fs/afs/main.c
@@ -111,6 +111,8 @@ static int __init afs_init(void)
 
 	/* initialise the callback update process */
 	ret = afs_callback_update_init();
+	if (ret < 0)
+		goto error_callback_update_init;
 
 	/* create the RxRPC transport */
 	ret = afs_open_socket();
@@ -127,15 +129,16 @@ static int __init afs_init(void)
 error_fs:
 	afs_close_socket();
 error_open_socket:
+	afs_callback_update_kill();
+error_callback_update_init:
+	afs_vlocation_purge();
 error_vl_update_init:
+	afs_cell_purge();
 error_cell_init:
 #ifdef CONFIG_AFS_FSCACHE
 	fscache_unregister_netfs(&afs_cache_netfs);
 error_cache:
 #endif
-	afs_callback_update_kill();
-	afs_vlocation_purge();
-	afs_cell_purge();
 	afs_proc_cleanup();
 	rcu_barrier();
 	printk(KERN_ERR "kAFS: failed to register: %d\n", ret);
diff --git a/fs/aio.c b/fs/aio.c
index 1ccf25cef1f..3006b5bc33d 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1277,7 +1277,7 @@ out:
 /* sys_io_destroy:
  *	Destroy the aio_context specified.  May cancel any outstanding 
  *	AIOs and block on completion.  Will fail with -ENOSYS if not
- *	implemented.  May fail with -EFAULT if the context pointed to
+ *	implemented.  May fail with -EINVAL if the context pointed to
  *	is invalid.
  */
 SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx)
@@ -1795,15 +1795,16 @@ SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb,
 
 /* io_getevents:
  *	Attempts to read at least min_nr events and up to nr events from
- *	the completion queue for the aio_context specified by ctx_id.  May
- *	fail with -EINVAL if ctx_id is invalid, if min_nr is out of range,
- *	if nr is out of range, if when is out of range.  May fail with
- *	-EFAULT if any of the memory specified to is invalid.  May return
- *	0 or < min_nr if no events are available and the timeout specified
- *	by when	has elapsed, where when == NULL specifies an infinite
- *	timeout.  Note that the timeout pointed to by when is relative and
- *	will be updated if not NULL and the operation blocks.  Will fail
- *	with -ENOSYS if not implemented.
+ *	the completion queue for the aio_context specified by ctx_id. If
+ *	it succeeds, the number of read events is returned. May fail with
+ *	-EINVAL if ctx_id is invalid, if min_nr is out of range, if nr is
+ *	out of range, if timeout is out of range.  May fail with -EFAULT
+ *	if any of the memory specified is invalid.  May return 0 or
+ *	< min_nr if the timeout specified by timeout has elapsed
+ *	before sufficient events are available, where timeout == NULL
+ *	specifies an infinite timeout. Note that the timeout pointed to by
+ *	timeout is relative and will be updated if not NULL and the
+ *	operation blocks. Will fail with -ENOSYS if not implemented.
  */
 SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
 		long, min_nr,
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index f4a7840bf42..42c7fafc8bf 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -37,9 +37,9 @@ void __cachefiles_printk_object(struct cachefiles_object *object,
 
 	printk(KERN_ERR "%sobject: OBJ%x\n",
 	       prefix, object->fscache.debug_id);
-	printk(KERN_ERR "%sobjstate=%s fl=%lx swfl=%lx ev=%lx[%lx]\n",
+	printk(KERN_ERR "%sobjstate=%s fl=%lx wbusy=%x ev=%lx[%lx]\n",
 	       prefix, fscache_object_states[object->fscache.state],
-	       object->fscache.flags, object->fscache.work.flags,
+	       object->fscache.flags, work_busy(&object->fscache.work),
 	       object->fscache.events,
 	       object->fscache.event_mask & FSCACHE_OBJECT_EVENTS_MASK);
 	printk(KERN_ERR "%sops=%u inp=%u exc=%u\n",
@@ -212,7 +212,7 @@ wait_for_old_object:
 
 		/* if the object we're waiting for is queued for processing,
 		 * then just put ourselves on the queue behind it */
-		if (slow_work_is_queued(&xobject->fscache.work)) {
+		if (work_pending(&xobject->fscache.work)) {
 			_debug("queue OBJ%x behind OBJ%x immediately",
 			       object->fscache.debug_id,
 			       xobject->fscache.debug_id);
@@ -220,8 +220,7 @@ wait_for_old_object:
 		}
 
 		/* otherwise we sleep until either the object we're waiting for
-		 * is done, or the slow-work facility wants the thread back to
-		 * do other work */
+		 * is done, or the fscache_object is congested */
 		wq = bit_waitqueue(&xobject->flags, CACHEFILES_OBJECT_ACTIVE);
 		init_wait(&wait);
 		requeue = false;
@@ -229,8 +228,8 @@ wait_for_old_object:
 			prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
 			if (!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags))
 				break;
-			requeue = slow_work_sleep_till_thread_needed(
-				&object->fscache.work, &timeout);
+
+			requeue = fscache_object_sleep_till_congested(&timeout);
 		} while (timeout > 0 && !requeue);
 		finish_wait(wq, &wait);
 
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index 0f0d41fbb03..0e3c0924cc3 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -422,7 +422,7 @@ int cachefiles_read_or_alloc_page(struct fscache_retrieval *op,
 	shift = PAGE_SHIFT - inode->i_sb->s_blocksize_bits;
 
 	op->op.flags &= FSCACHE_OP_KEEP_FLAGS;
-	op->op.flags |= FSCACHE_OP_FAST;
+	op->op.flags |= FSCACHE_OP_ASYNC;
 	op->op.processor = cachefiles_read_copier;
 
 	pagevec_init(&pagevec, 0);
@@ -729,7 +729,7 @@ int cachefiles_read_or_alloc_pages(struct fscache_retrieval *op,
 	pagevec_init(&pagevec, 0);
 
 	op->op.flags &= FSCACHE_OP_KEEP_FLAGS;
-	op->op.flags |= FSCACHE_OP_FAST;
+	op->op.flags |= FSCACHE_OP_ASYNC;
 	op->op.processor = cachefiles_read_copier;
 
 	INIT_LIST_HEAD(&backpages);
diff --git a/fs/char_dev.c b/fs/char_dev.c
index d6db933df2b..f80a4f25123 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -20,6 +20,7 @@
 #include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/backing-dev.h>
+#include <linux/tty.h>
 
 #include "internal.h"
 
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 5739fd7f88b..917b7d449bb 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -2,7 +2,6 @@ config CIFS
 	tristate "CIFS support (advanced network filesystem, SMBFS successor)"
 	depends on INET
 	select NLS
-	select SLOW_WORK
 	help
 	  This is the client VFS module for the Common Internet File System
 	  (CIFS) protocol which is the successor to the Server Message Block
@@ -71,14 +70,14 @@ config CIFS_WEAK_PW_HASH
 	  If unsure, say N.
 
 config CIFS_UPCALL
-	  bool "Kerberos/SPNEGO advanced session setup"
-	  depends on CIFS && KEYS
-	  help
-	    Enables an upcall mechanism for CIFS which accesses
-	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-	    Kerberos tickets which are needed to mount to certain secure servers
-	    (for which more secure Kerberos authentication is required). If
-	    unsure, say N.
+	bool "Kerberos/SPNEGO advanced session setup"
+	depends on CIFS && KEYS
+	select DNS_RESOLVER
+	help
+	  Enables an upcall mechanism for CIFS which accesses userspace helper
+	  utilities to provide SPNEGO packaged (RFC 4178) Kerberos tickets
+	  which are needed to mount to certain secure servers (for which more
+	  secure Kerberos authentication is required). If unsure, say N.
 
 config CIFS_XATTR
         bool "CIFS extended attributes"
@@ -122,6 +121,7 @@ config CIFS_DEBUG2
 config CIFS_DFS_UPCALL
 	  bool "DFS feature support"
 	  depends on CIFS && KEYS
+	  select DNS_RESOLVER
 	  help
 	    Distributed File System (DFS) support is used to access shares
 	    transparently in an enterprise name space, even if the share
diff --git a/fs/cifs/README b/fs/cifs/README
index a727b7cb075..a7081eeeb85 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -568,8 +568,9 @@ module can be displayed via modinfo.
 Misc /proc/fs/cifs Flags and Debug Info
 =======================================
 Informational pseudo-files:
-DebugData		Displays information about active CIFS sessions
-			and shares, as well as the cifs.ko version.
+DebugData		Displays information about active CIFS sessions and
+			shares, features enabled as well as the cifs.ko
+			version.
 Stats			Lists summary resource usage information as well as per
 			share statistics, if CONFIG_CIFS_STATS in enabled
 			in the kernel configuration.
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 4fce6e61b34..eb1ba493489 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -119,6 +119,31 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v)
 		    "Display Internal CIFS Data Structures for Debugging\n"
 		    "---------------------------------------------------\n");
 	seq_printf(m, "CIFS Version %s\n", CIFS_VERSION);
+	seq_printf(m, "Features: ");
+#ifdef CONFIG_CIFS_DFS_UPCALL
+	seq_printf(m, "dfs");
+	seq_putc(m, ' ');
+#endif
+#ifdef CONFIG_CIFS_FSCACHE
+	seq_printf(m, "fscache");
+	seq_putc(m, ' ');
+#endif
+#ifdef CONFIG_CIFS_WEAK_PW_HASH
+	seq_printf(m, "lanman");
+	seq_putc(m, ' ');
+#endif
+#ifdef CONFIG_CIFS_POSIX
+	seq_printf(m, "posix");
+	seq_putc(m, ' ');
+#endif
+#ifdef CONFIG_CIFS_UPCALL
+	seq_printf(m, "spnego");
+	seq_putc(m, ' ');
+#endif
+#ifdef CONFIG_CIFS_XATTR
+	seq_printf(m, "xattr");
+#endif
+	seq_putc(m, '\n');
 	seq_printf(m, "Active VFS Requests: %d\n", GlobalTotalActiveXid);
 	seq_printf(m, "Servers:");
 
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index dc1ed50ea06..d6ced7aa23c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -141,7 +141,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 	}
 
 	rc = dns_resolve_server_name_to_ip(*devname, &srvIP);
-	if (rc != 0) {
+	if (rc < 0) {
 		cERROR(1, "%s: Failed to resolve server part of %s to IP: %d",
 			  __func__, *devname, rc);
 		goto compose_mount_options_err;
@@ -150,8 +150,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata,
 	 * assuming that we have 'unc=' and 'ip=' in
 	 * the original sb_mountdata
 	 */
-	md_len = strlen(sb_mountdata) + strlen(srvIP) +
-		strlen(ref->node_name) + 12;
+	md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12;
 	mountdata = kzalloc(md_len+1, GFP_KERNEL);
 	if (mountdata == NULL) {
 		rc = -ENOMEM;
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 6effccff85a..87044906cd1 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -84,6 +84,9 @@ struct key_type cifs_spnego_key_type = {
 /* strlen of ";uid=0x" */
 #define UID_KEY_LEN		7
 
+/* strlen of ";creduid=0x" */
+#define CREDUID_KEY_LEN		11
+
 /* strlen of ";user=" */
 #define USER_KEY_LEN		6
 
@@ -107,6 +110,7 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 		   IP_KEY_LEN + INET6_ADDRSTRLEN +
 		   MAX_MECH_STR_LEN +
 		   UID_KEY_LEN + (sizeof(uid_t) * 2) +
+		   CREDUID_KEY_LEN + (sizeof(uid_t) * 2) +
 		   USER_KEY_LEN + strlen(sesInfo->userName) +
 		   PID_KEY_LEN + (sizeof(pid_t) * 2) + 1;
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 8a2cf129e53..a5ed10c9afe 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -45,7 +45,6 @@
 #include "cifs_fs_sb.h"
 #include <linux/mm.h>
 #include <linux/key-type.h>
-#include "dns_resolve.h"
 #include "cifs_spnego.h"
 #include "fscache.h"
 #define CIFS_MAGIC_NUMBER 0xFF534D42	/* the first four bytes of SMB PDUs */
@@ -934,27 +933,13 @@ init_cifs(void)
 	if (rc)
 		goto out_unregister_filesystem;
 #endif
-#ifdef CONFIG_CIFS_DFS_UPCALL
-	rc = cifs_init_dns_resolver();
-	if (rc)
-		goto out_unregister_key_type;
-#endif
-	rc = slow_work_register_user(THIS_MODULE);
-	if (rc)
-		goto out_unregister_resolver_key;
 
 	return 0;
 
- out_unregister_resolver_key:
-#ifdef CONFIG_CIFS_DFS_UPCALL
-	cifs_exit_dns_resolver();
- out_unregister_key_type:
-#endif
 #ifdef CONFIG_CIFS_UPCALL
-	unregister_key_type(&cifs_spnego_key_type);
  out_unregister_filesystem:
-#endif
 	unregister_filesystem(&cifs_fs_type);
+#endif
  out_destroy_request_bufs:
 	cifs_destroy_request_bufs();
  out_destroy_mids:
@@ -976,7 +961,6 @@ exit_cifs(void)
 	cifs_fscache_unregister();
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	cifs_dfs_release_automount_timer();
-	cifs_exit_dns_resolver();
 #endif
 #ifdef CONFIG_CIFS_UPCALL
 	unregister_key_type(&cifs_spnego_key_type);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 59906146ad3..0cdfb8c32ac 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -22,7 +22,7 @@
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/slab.h>
-#include <linux/slow-work.h>
+#include <linux/workqueue.h>
 #include "cifs_fs_sb.h"
 #include "cifsacl.h"
 /*
@@ -356,7 +356,7 @@ struct cifsFileInfo {
 	atomic_t count;		/* reference count */
 	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
 	struct cifs_search_info srch_inf;
-	struct slow_work oplock_break; /* slow_work job for oplock breaks */
+	struct work_struct oplock_break; /* work for oplock breaks */
 };
 
 /* Take a reference on the file private data */
@@ -728,6 +728,10 @@ GLOBAL_EXTERN unsigned int cifs_min_rcv;    /* min size of big ntwrk buf pool */
 GLOBAL_EXTERN unsigned int cifs_min_small;  /* min size of small buf pool */
 GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 
+void cifs_oplock_break(struct work_struct *work);
+void cifs_oplock_break_get(struct cifsFileInfo *cfile);
+void cifs_oplock_break_put(struct cifsFileInfo *cfile);
+
 extern const struct slow_work_ops cifs_oplock_break_ops;
 
 #endif	/* _CIFS_GLOB_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 2eaebbd3113..1f545081408 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -86,8 +86,8 @@ extern unsigned int smbCalcSize(struct smb_hdr *ptr);
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			struct TCP_Server_Info *server);
-extern int cifs_convert_address(struct sockaddr *dst, char *src);
-extern int cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+extern int cifs_convert_address(struct sockaddr *dst, const char *src, int len);
+extern int cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len,
 				unsigned short int port);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 2a43a0aca96..95c2ea67edf 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1543,6 +1543,7 @@ cifs_get_tcp_session(struct smb_vol *volume_info)
 	if (volume_info->UNCip && volume_info->UNC) {
 		rc = cifs_fill_sockaddr((struct sockaddr *)&addr,
 					volume_info->UNCip,
+					strlen(volume_info->UNCip),
 					volume_info->port);
 		if (!rc) {
 			/* we failed translating address */
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index a7de5e9fff1..578d88c5b46 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -157,7 +157,7 @@ cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
 	mutex_init(&pCifsFile->lock_mutex);
 	INIT_LIST_HEAD(&pCifsFile->llist);
 	atomic_set(&pCifsFile->count, 1);
-	slow_work_init(&pCifsFile->oplock_break, &cifs_oplock_break_ops);
+	INIT_WORK(&pCifsFile->oplock_break, cifs_oplock_break);
 
 	write_lock(&GlobalSMBSeslock);
 	list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 3ad7f4300c4..0eb87026cad 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -4,6 +4,8 @@
  *   Copyright (c) 2007 Igor Mammedov
  *   Author(s): Igor Mammedov (niallain@gmail.com)
  *              Steve French (sfrench@us.ibm.com)
+ *              Wang Lei (wang840925@gmail.com)
+ *		David Howells (dhowells@redhat.com)
  *
  *   Contains the CIFS DFS upcall routines used for hostname to
  *   IP address translation.
@@ -24,214 +26,73 @@
  */
 
 #include <linux/slab.h>
-#include <linux/keyctl.h>
-#include <linux/key-type.h>
-#include <keys/user-type.h>
+#include <linux/dns_resolver.h>
 #include "dns_resolve.h"
 #include "cifsglob.h"
 #include "cifsproto.h"
 #include "cifs_debug.h"
 
-static const struct cred *dns_resolver_cache;
-
-/* Checks if supplied name is IP address
- * returns:
- * 		1 - name is IP
- * 		0 - name is not IP
- */
-static int
-is_ip(char *name)
-{
-	struct sockaddr_storage ss;
-
-	return cifs_convert_address((struct sockaddr *)&ss, name);
-}
-
-static int
-dns_resolver_instantiate(struct key *key, const void *data,
-		size_t datalen)
-{
-	int rc = 0;
-	char *ip;
-
-	ip = kmalloc(datalen + 1, GFP_KERNEL);
-	if (!ip)
-		return -ENOMEM;
-
-	memcpy(ip, data, datalen);
-	ip[datalen] = '\0';
-
-	/* make sure this looks like an address */
-	if (!is_ip(ip)) {
-		kfree(ip);
-		return -EINVAL;
-	}
-
-	key->type_data.x[0] = datalen;
-	key->payload.data = ip;
-
-	return rc;
-}
-
-static void
-dns_resolver_destroy(struct key *key)
-{
-	kfree(key->payload.data);
-}
-
-struct key_type key_type_dns_resolver = {
-	.name        = "dns_resolver",
-	.def_datalen = sizeof(struct in_addr),
-	.describe    = user_describe,
-	.instantiate = dns_resolver_instantiate,
-	.destroy     = dns_resolver_destroy,
-	.match       = user_match,
-};
-
-/* Resolves server name to ip address.
- * input:
- * 	unc - server UNC
- * output:
- * 	*ip_addr - pointer to server ip, caller responcible for freeing it.
- * return 0 on success
+/**
+ * dns_resolve_server_name_to_ip - Resolve UNC server name to ip address.
+ * @unc: UNC path specifying the server
+ * @ip_addr: Where to return the IP address.
+ *
+ * The IP address will be returned in string form, and the caller is
+ * responsible for freeing it.
+ *
+ * Returns length of result on success, -ve on error.
  */
 int
 dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
 {
-	const struct cred *saved_cred;
-	int rc = -EAGAIN;
-	struct key *rkey = ERR_PTR(-EAGAIN);
+	struct sockaddr_storage ss;
+	const char *hostname, *sep;
 	char *name;
-	char *data = NULL;
-	int len;
+	int len, rc;
 
 	if (!ip_addr || !unc)
 		return -EINVAL;
 
-	/* search for server name delimiter */
 	len = strlen(unc);
 	if (len < 3) {
 		cFYI(1, "%s: unc is too short: %s", __func__, unc);
 		return -EINVAL;
 	}
-	len -= 2;
-	name = memchr(unc+2, '\\', len);
-	if (!name) {
-		cFYI(1, "%s: probably server name is whole unc: %s",
-					__func__, unc);
-	} else {
-		len = (name - unc) - 2/* leading // */;
-	}
-
-	name = kmalloc(len+1, GFP_KERNEL);
-	if (!name) {
-		rc = -ENOMEM;
-		return rc;
-	}
-	memcpy(name, unc+2, len);
-	name[len] = 0;
-
-	if (is_ip(name)) {
-		cFYI(1, "%s: it is IP, skipping dns upcall: %s",
-					__func__, name);
-		data = name;
-		goto skip_upcall;
-	}
 
-	saved_cred = override_creds(dns_resolver_cache);
-	rkey = request_key(&key_type_dns_resolver, name, "");
-	revert_creds(saved_cred);
-	if (!IS_ERR(rkey)) {
-		if (!(rkey->perm & KEY_USR_VIEW)) {
-			down_read(&rkey->sem);
-			rkey->perm |= KEY_USR_VIEW;
-			up_read(&rkey->sem);
-		}
-		len = rkey->type_data.x[0];
-		data = rkey->payload.data;
-	} else {
-		cERROR(1, "%s: unable to resolve: %s", __func__, name);
-		goto out;
-	}
-
-skip_upcall:
-	if (data) {
-		*ip_addr = kmalloc(len + 1, GFP_KERNEL);
-		if (*ip_addr) {
-			memcpy(*ip_addr, data, len + 1);
-			if (!IS_ERR(rkey))
-				cFYI(1, "%s: resolved: %s to %s", __func__,
-							name,
-							*ip_addr
-					);
-			rc = 0;
-		} else {
-			rc = -ENOMEM;
-		}
-		if (!IS_ERR(rkey))
-			key_put(rkey);
-	}
+	/* Discount leading slashes for cifs */
+	len -= 2;
+	hostname = unc + 2;
 
-out:
-	kfree(name);
+	/* Search for server name delimiter */
+	sep = memchr(hostname, '\\', len);
+	if (sep)
+		len = sep - unc;
+	else
+		cFYI(1, "%s: probably server name is whole unc: %s",
+		     __func__, unc);
+
+	/* Try to interpret hostname as an IPv4 or IPv6 address */
+	rc = cifs_convert_address((struct sockaddr *)&ss, hostname, len);
+	if (rc > 0)
+		goto name_is_IP_address;
+
+	/* Perform the upcall */
+	rc = dns_query(NULL, hostname, len, NULL, ip_addr, NULL);
+	if (rc < 0)
+		cERROR(1, "%s: unable to resolve: %*.*s",
+		       __func__, len, len, hostname);
+	else
+		cFYI(1, "%s: resolved: %*.*s to %s",
+		     __func__, len, len, hostname, *ip_addr);
 	return rc;
-}
 
-int __init cifs_init_dns_resolver(void)
-{
-	struct cred *cred;
-	struct key *keyring;
-	int ret;
-
-	printk(KERN_NOTICE "Registering the %s key type\n",
-	       key_type_dns_resolver.name);
-
-	/* create an override credential set with a special thread keyring in
-	 * which DNS requests are cached
-	 *
-	 * this is used to prevent malicious redirections from being installed
-	 * with add_key().
-	 */
-	cred = prepare_kernel_cred(NULL);
-	if (!cred)
+name_is_IP_address:
+	name = kmalloc(len + 1, GFP_KERNEL);
+	if (!name)
 		return -ENOMEM;
-
-	keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
-			    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
-			    KEY_USR_VIEW | KEY_USR_READ,
-			    KEY_ALLOC_NOT_IN_QUOTA);
-	if (IS_ERR(keyring)) {
-		ret = PTR_ERR(keyring);
-		goto failed_put_cred;
-	}
-
-	ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
-	if (ret < 0)
-		goto failed_put_key;
-
-	ret = register_key_type(&key_type_dns_resolver);
-	if (ret < 0)
-		goto failed_put_key;
-
-	/* instruct request_key() to use this special keyring as a cache for
-	 * the results it looks up */
-	cred->thread_keyring = keyring;
-	cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
-	dns_resolver_cache = cred;
+	memcpy(name, hostname, len);
+	name[len] = 0;
+	cFYI(1, "%s: unc is IP, skipping dns upcall: %s", __func__, name);
+	*ip_addr = name;
 	return 0;
-
-failed_put_key:
-	key_put(keyring);
-failed_put_cred:
-	put_cred(cred);
-	return ret;
-}
-
-void cifs_exit_dns_resolver(void)
-{
-	key_revoke(dns_resolver_cache->thread_keyring);
-	unregister_key_type(&key_type_dns_resolver);
-	put_cred(dns_resolver_cache);
-	printk(KERN_NOTICE "Unregistered %s key type\n",
-	       key_type_dns_resolver.name);
 }
diff --git a/fs/cifs/dns_resolve.h b/fs/cifs/dns_resolve.h
index 5d7f291df16..d3f5d27f4d0 100644
--- a/fs/cifs/dns_resolve.h
+++ b/fs/cifs/dns_resolve.h
@@ -24,8 +24,6 @@
 #define _DNS_RESOLVE_H
 
 #ifdef __KERNEL__
-extern int __init cifs_init_dns_resolver(void);
-extern void cifs_exit_dns_resolver(void);
 extern int dns_resolve_server_name_to_ip(const char *unc, char **ip_addr);
 #endif /* KERNEL */
 
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fa04a00d126..db11fdef0e9 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -2307,8 +2307,7 @@ static void cifs_invalidate_page(struct page *page, unsigned long offset)
 		cifs_fscache_invalidate_page(page, &cifsi->vfs_inode);
 }
 
-static void
-cifs_oplock_break(struct slow_work *work)
+void cifs_oplock_break(struct work_struct *work)
 {
 	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
 						  oplock_break);
@@ -2345,33 +2344,30 @@ cifs_oplock_break(struct slow_work *work)
 				 LOCKING_ANDX_OPLOCK_RELEASE, false);
 		cFYI(1, "Oplock release rc = %d", rc);
 	}
+
+	/*
+	 * We might have kicked in before is_valid_oplock_break()
+	 * finished grabbing reference for us.  Make sure it's done by
+	 * waiting for GlobalSMSSeslock.
+	 */
+	write_lock(&GlobalSMBSeslock);
+	write_unlock(&GlobalSMBSeslock);
+
+	cifs_oplock_break_put(cfile);
 }
 
-static int
-cifs_oplock_break_get(struct slow_work *work)
+void cifs_oplock_break_get(struct cifsFileInfo *cfile)
 {
-	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
-						  oplock_break);
 	mntget(cfile->mnt);
 	cifsFileInfo_get(cfile);
-	return 0;
 }
 
-static void
-cifs_oplock_break_put(struct slow_work *work)
+void cifs_oplock_break_put(struct cifsFileInfo *cfile)
 {
-	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
-						  oplock_break);
 	mntput(cfile->mnt);
 	cifsFileInfo_put(cfile);
 }
 
-const struct slow_work_ops cifs_oplock_break_ops = {
-	.get_ref	= cifs_oplock_break_get,
-	.put_ref	= cifs_oplock_break_put,
-	.execute	= cifs_oplock_break,
-};
-
 const struct address_space_operations cifs_addr_ops = {
 	.readpage = cifs_readpage,
 	.readpages = cifs_readpages,
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index a15b3a9bbff..dc4c47ab958 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -732,15 +732,9 @@ cifs_find_inode(struct inode *inode, void *opaque)
 	if ((inode->i_mode & S_IFMT) != (fattr->cf_mode & S_IFMT))
 		return 0;
 
-	/*
-	 * uh oh -- it's a directory. We can't use it since hardlinked dirs are
-	 * verboten. Disable serverino and return it as if it were found, the
-	 * caller can discard it, generate a uniqueid and retry the find
-	 */
-	if (S_ISDIR(inode->i_mode) && !list_empty(&inode->i_dentry)) {
+	/* if it's not a directory or has no dentries, then flag it */
+	if (S_ISDIR(inode->i_mode) && !list_empty(&inode->i_dentry))
 		fattr->cf_flags |= CIFS_FATTR_INO_COLLISION;
-		cifs_autodisable_serverino(CIFS_SB(inode->i_sb));
-	}
 
 	return 1;
 }
@@ -754,6 +748,27 @@ cifs_init_inode(struct inode *inode, void *opaque)
 	return 0;
 }
 
+/*
+ * walk dentry list for an inode and report whether it has aliases that
+ * are hashed. We use this to determine if a directory inode can actually
+ * be used.
+ */
+static bool
+inode_has_hashed_dentries(struct inode *inode)
+{
+	struct dentry *dentry;
+
+	spin_lock(&dcache_lock);
+	list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
+		if (!d_unhashed(dentry) || IS_ROOT(dentry)) {
+			spin_unlock(&dcache_lock);
+			return true;
+		}
+	}
+	spin_unlock(&dcache_lock);
+	return false;
+}
+
 /* Given fattrs, get a corresponding inode */
 struct inode *
 cifs_iget(struct super_block *sb, struct cifs_fattr *fattr)
@@ -769,12 +784,16 @@ retry_iget5_locked:
 
 	inode = iget5_locked(sb, hash, cifs_find_inode, cifs_init_inode, fattr);
 	if (inode) {
-		/* was there a problematic inode number collision? */
+		/* was there a potentially problematic inode collision? */
 		if (fattr->cf_flags & CIFS_FATTR_INO_COLLISION) {
-			iput(inode);
-			fattr->cf_uniqueid = iunique(sb, ROOT_I);
 			fattr->cf_flags &= ~CIFS_FATTR_INO_COLLISION;
-			goto retry_iget5_locked;
+
+			if (inode_has_hashed_dentries(inode)) {
+				cifs_autodisable_serverino(CIFS_SB(sb));
+				iput(inode);
+				fattr->cf_uniqueid = iunique(sb, ROOT_I);
+				goto retry_iget5_locked;
+			}
 		}
 
 		cifs_fattr_to_inode(inode, fattr);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 1394aa37f26..3ccadc1326d 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -498,7 +498,6 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
 	struct cifsTconInfo *tcon;
 	struct cifsInodeInfo *pCifsInode;
 	struct cifsFileInfo *netfile;
-	int rc;
 
 	cFYI(1, "Checking for oplock break or dnotify response");
 	if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) &&
@@ -583,13 +582,18 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv)
 				pCifsInode->clientCanCacheAll = false;
 				if (pSMB->OplockLevel == 0)
 					pCifsInode->clientCanCacheRead = false;
-				rc = slow_work_enqueue(&netfile->oplock_break);
-				if (rc) {
-					cERROR(1, "failed to enqueue oplock "
-						   "break: %d\n", rc);
-				} else {
-					netfile->oplock_break_cancelled = false;
-				}
+
+				/*
+				 * cifs_oplock_break_put() can't be called
+				 * from here.  Get reference after queueing
+				 * succeeded.  cifs_oplock_break() will
+				 * synchronize using GlobalSMSSeslock.
+				 */
+				if (queue_work(system_nrt_wq,
+					       &netfile->oplock_break))
+					cifs_oplock_break_get(netfile);
+				netfile->oplock_break_cancelled = false;
+
 				read_unlock(&GlobalSMBSeslock);
 				read_unlock(&cifs_tcp_ses_lock);
 				return true;
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index c6721ee26db..f97851119e6 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -140,17 +140,18 @@ static const struct smb_to_posix_error mapping_table_ERRHRD[] = {
  * Returns 0 on failure.
  */
 static int
-cifs_inet_pton(const int address_family, const char *cp, void *dst)
+cifs_inet_pton(const int address_family, const char *cp, int len, void *dst)
 {
 	int ret = 0;
 
 	/* calculate length by finding first slash or NULL */
 	if (address_family == AF_INET)
-		ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
+		ret = in4_pton(cp, len, dst, '\\', NULL);
 	else if (address_family == AF_INET6)
-		ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
+		ret = in6_pton(cp, len, dst , '\\', NULL);
 
-	cFYI(DBG2, "address conversion returned %d for %s", ret, cp);
+	cFYI(DBG2, "address conversion returned %d for %*.*s",
+	     ret, len, len, cp);
 	if (ret > 0)
 		ret = 1;
 	return ret;
@@ -165,37 +166,39 @@ cifs_inet_pton(const int address_family, const char *cp, void *dst)
  * Returns 0 on failure.
  */
 int
-cifs_convert_address(struct sockaddr *dst, char *src)
+cifs_convert_address(struct sockaddr *dst, const char *src, int len)
 {
-	int rc;
-	char *pct, *endp;
+	int rc, alen, slen;
+	const char *pct;
+	char *endp, scope_id[13];
 	struct sockaddr_in *s4 = (struct sockaddr_in *) dst;
 	struct sockaddr_in6 *s6 = (struct sockaddr_in6 *) dst;
 
 	/* IPv4 address */
-	if (cifs_inet_pton(AF_INET, src, &s4->sin_addr.s_addr)) {
+	if (cifs_inet_pton(AF_INET, src, len, &s4->sin_addr.s_addr)) {
 		s4->sin_family = AF_INET;
 		return 1;
 	}
 
-	/* temporarily terminate string */
-	pct = strchr(src, '%');
-	if (pct)
-		*pct = '\0';
-
-	rc = cifs_inet_pton(AF_INET6, src, &s6->sin6_addr.s6_addr);
-
-	/* repair temp termination (if any) and make pct point to scopeid */
-	if (pct)
-		*pct++ = '%';
+	/* attempt to exclude the scope ID from the address part */
+	pct = memchr(src, '%', len);
+	alen = pct ? pct - src : len;
 
+	rc = cifs_inet_pton(AF_INET6, src, alen, &s6->sin6_addr.s6_addr);
 	if (!rc)
 		return rc;
 
 	s6->sin6_family = AF_INET6;
 	if (pct) {
+		/* grab the scope ID */
+		slen = len - (alen + 1);
+		if (slen <= 0 || slen > 12)
+			return 0;
+		memcpy(scope_id, pct + 1, slen);
+		scope_id[slen] = '\0';
+
 		s6->sin6_scope_id = (u32) simple_strtoul(pct, &endp, 0);
-		if (!*pct || *endp)
+		if (endp != scope_id + slen)
 			return 0;
 	}
 
@@ -203,10 +206,10 @@ cifs_convert_address(struct sockaddr *dst, char *src)
 }
 
 int
-cifs_fill_sockaddr(struct sockaddr *dst, char *src,
+cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len,
 		   const unsigned short int port)
 {
-	if (!cifs_convert_address(dst, src))
+	if (!cifs_convert_address(dst, src, len))
 		return 0;
 
 	switch (dst->sa_family) {
diff --git a/fs/compat.c b/fs/compat.c
index c6fda9aeb86..5976bad85f6 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -15,6 +15,7 @@
  *  published by the Free Software Foundation.
  */
 
+#include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
 #include <linux/compat.h>
@@ -891,8 +892,6 @@ asmlinkage long compat_sys_mount(char __user * dev_name, char __user * dir_name,
 	return retval;
 }
 
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
-
 struct compat_old_linux_dirent {
 	compat_ulong_t	d_ino;
 	compat_ulong_t	d_offset;
@@ -981,7 +980,8 @@ static int compat_filldir(void *__buf, const char *name, int namlen,
 	struct compat_linux_dirent __user * dirent;
 	struct compat_getdents_callback *buf = __buf;
 	compat_ulong_t d_ino;
-	int reclen = ALIGN(NAME_OFFSET(dirent) + namlen + 2, sizeof(compat_long_t));
+	int reclen = ALIGN(offsetof(struct compat_linux_dirent, d_name) +
+		namlen + 2, sizeof(compat_long_t));
 
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
@@ -1068,8 +1068,8 @@ static int compat_filldir64(void * __buf, const char * name, int namlen, loff_t
 {
 	struct linux_dirent64 __user *dirent;
 	struct compat_getdents_callback64 *buf = __buf;
-	int jj = NAME_OFFSET(dirent);
-	int reclen = ALIGN(jj + namlen + 1, sizeof(u64));
+	int reclen = ALIGN(offsetof(struct linux_dirent64, d_name) + namlen + 1,
+		sizeof(u64));
 	u64 off;
 
 	buf->error = -EINVAL;	/* only used if we fail.. */
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index c0d35c62052..37a34c2c622 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -248,7 +248,7 @@ static struct connection *assoc2con(int assoc_id)
 
 	for (i = 0 ; i < CONN_HASH_SIZE; i++) {
 		hlist_for_each_entry(con, h, &connection_hash[i], list) {
-			if (con && con->sctp_assoc == assoc_id) {
+			if (con->sctp_assoc == assoc_id) {
 				mutex_unlock(&connections_lock);
 				return con;
 			}
diff --git a/fs/dlm/netlink.c b/fs/dlm/netlink.c
index 2c6ad518100..ef17e0169da 100644
--- a/fs/dlm/netlink.c
+++ b/fs/dlm/netlink.c
@@ -81,24 +81,11 @@ static struct genl_ops dlm_nl_ops = {
 
 int __init dlm_netlink_init(void)
 {
-	int rv;
-
-	rv = genl_register_family(&family);
-	if (rv)
-		return rv;
-
-	rv = genl_register_ops(&family, &dlm_nl_ops);
-	if (rv < 0)
-		goto err;
-	return 0;
- err:
-	genl_unregister_family(&family);
-	return rv;
+	return genl_register_family_with_ops(&family, &dlm_nl_ops, 1);
 }
 
 void dlm_netlink_exit(void)
 {
-	genl_unregister_ops(&family, &dlm_nl_ops);
 	genl_unregister_family(&family);
 }
 
diff --git a/fs/exec.c b/fs/exec.c
index e19de6a8033..dab85ecad68 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -28,7 +28,6 @@
 #include <linux/mm.h>
 #include <linux/stat.h>
 #include <linux/fcntl.h>
-#include <linux/smp_lock.h>
 #include <linux/swap.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -653,6 +652,7 @@ int setup_arg_pages(struct linux_binprm *bprm,
 	else
 		stack_base = vma->vm_start - stack_expand;
 #endif
+	current->mm->start_stack = bprm->p;
 	ret = expand_stack(vma, stack_base);
 	if (ret)
 		ret = -EFAULT;
@@ -1891,13 +1891,7 @@ void do_coredump(long signr, int exit_code, struct pt_regs *regs)
 	 */
 	clear_thread_flag(TIF_SIGPENDING);
 
-	/*
-	 * lock_kernel() because format_corename() is controlled by sysctl, which
-	 * uses lock_kernel()
-	 */
- 	lock_kernel();
 	ispipe = format_corename(corename, signr);
-	unlock_kernel();
 
  	if (ispipe) {
 		int dump_count;
diff --git a/fs/ext3/Kconfig b/fs/ext3/Kconfig
index 522b15498f4..e8c6ba0e4a3 100644
--- a/fs/ext3/Kconfig
+++ b/fs/ext3/Kconfig
@@ -31,6 +31,7 @@ config EXT3_FS
 config EXT3_DEFAULTS_TO_ORDERED
 	bool "Default to 'data=ordered' in ext3"
 	depends on EXT3_FS
+	default y
 	help
 	  The journal mode options for ext3 have different tradeoffs
 	  between when data is guaranteed to be on disk and
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 735f0190ec2..001eb0e2d48 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1149,9 +1149,25 @@ static int walk_page_buffers(	handle_t *handle,
 static int do_journal_get_write_access(handle_t *handle,
 					struct buffer_head *bh)
 {
+	int dirty = buffer_dirty(bh);
+	int ret;
+
 	if (!buffer_mapped(bh) || buffer_freed(bh))
 		return 0;
-	return ext3_journal_get_write_access(handle, bh);
+	/*
+	 * __block_prepare_write() could have dirtied some buffers. Clean
+	 * the dirty bit as jbd2_journal_get_write_access() could complain
+	 * otherwise about fs integrity issues. Setting of the dirty bit
+	 * by __block_prepare_write() isn't a real problem here as we clear
+	 * the bit before releasing a page lock and thus writeback cannot
+	 * ever write the buffer.
+	 */
+	if (dirty)
+		clear_buffer_dirty(bh);
+	ret = ext3_journal_get_write_access(handle, bh);
+	if (!ret && dirty)
+		ret = ext3_journal_dirty_metadata(handle, bh);
+	return ret;
 }
 
 /*
@@ -1625,10 +1641,7 @@ static int ext3_writeback_writepage(struct page *page,
 		goto out_fail;
 	}
 
-	if (test_opt(inode->i_sb, NOBH) && ext3_should_writeback_data(inode))
-		ret = nobh_writepage(page, ext3_get_block, wbc);
-	else
-		ret = block_write_full_page(page, ext3_get_block, wbc);
+	ret = block_write_full_page(page, ext3_get_block, wbc);
 
 	err = ext3_journal_stop(handle);
 	if (!ret)
@@ -1922,17 +1935,6 @@ static int ext3_block_truncate_page(handle_t *handle, struct page *page,
 	length = blocksize - (offset & (blocksize - 1));
 	iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits);
 
-	/*
-	 * For "nobh" option,  we can only work if we don't need to
-	 * read-in the page - otherwise we create buffers to do the IO.
-	 */
-	if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) &&
-	     ext3_should_writeback_data(inode) && PageUptodate(page)) {
-		zero_user(page, offset, length);
-		set_page_dirty(page);
-		goto unlock;
-	}
-
 	if (!page_has_buffers(page))
 		create_empty_buffers(page, blocksize, 0);
 
@@ -2284,27 +2286,6 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode,
 					   depth);
 
 			/*
-			 * We've probably journalled the indirect block several
-			 * times during the truncate.  But it's no longer
-			 * needed and we now drop it from the transaction via
-			 * journal_revoke().
-			 *
-			 * That's easy if it's exclusively part of this
-			 * transaction.  But if it's part of the committing
-			 * transaction then journal_forget() will simply
-			 * brelse() it.  That means that if the underlying
-			 * block is reallocated in ext3_get_block(),
-			 * unmap_underlying_metadata() will find this block
-			 * and will try to get rid of it.  damn, damn.
-			 *
-			 * If this block has already been committed to the
-			 * journal, a revoke record will be written.  And
-			 * revoke records must be emitted *before* clearing
-			 * this block's bit in the bitmaps.
-			 */
-			ext3_forget(handle, 1, inode, bh, bh->b_blocknr);
-
-			/*
 			 * Everything below this this pointer has been
 			 * released.  Now let this top-of-subtree go.
 			 *
@@ -2327,6 +2308,31 @@ static void ext3_free_branches(handle_t *handle, struct inode *inode,
 				truncate_restart_transaction(handle, inode);
 			}
 
+			/*
+			 * We've probably journalled the indirect block several
+			 * times during the truncate.  But it's no longer
+			 * needed and we now drop it from the transaction via
+			 * journal_revoke().
+			 *
+			 * That's easy if it's exclusively part of this
+			 * transaction.  But if it's part of the committing
+			 * transaction then journal_forget() will simply
+			 * brelse() it.  That means that if the underlying
+			 * block is reallocated in ext3_get_block(),
+			 * unmap_underlying_metadata() will find this block
+			 * and will try to get rid of it.  damn, damn. Thus
+			 * we don't allow a block to be reallocated until
+			 * a transaction freeing it has fully committed.
+			 *
+			 * We also have to make sure journal replay after a
+			 * crash does not overwrite non-journaled data blocks
+			 * with old metadata when the block got reallocated for
+			 * data.  Thus we have to store a revoke record for a
+			 * block in the same transaction in which we free the
+			 * block.
+			 */
+			ext3_forget(handle, 1, inode, bh, bh->b_blocknr);
+
 			ext3_free_blocks(handle, inode, nr, 1);
 
 			if (parent_bh) {
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index ee184084ca4..2b35ddb70d6 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1447,7 +1447,6 @@ static int ext3_add_entry (handle_t *handle, struct dentry *dentry,
 	struct inode *inode)
 {
 	struct inode *dir = dentry->d_parent->d_inode;
-	unsigned long offset;
 	struct buffer_head * bh;
 	struct ext3_dir_entry_2 *de;
 	struct super_block * sb;
@@ -1469,7 +1468,7 @@ static int ext3_add_entry (handle_t *handle, struct dentry *dentry,
 		ext3_mark_inode_dirty(handle, dir);
 	}
 	blocks = dir->i_size >> sb->s_blocksize_bits;
-	for (block = 0, offset = 0; block < blocks; block++) {
+	for (block = 0; block < blocks; block++) {
 		bh = ext3_bread(handle, dir, block, 0, &retval);
 		if(!bh)
 			return retval;
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 54351ac7cef..0ccd7b12b73 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -964,7 +964,6 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 		      ext3_fsblk_t n_blocks_count)
 {
 	ext3_fsblk_t o_blocks_count;
-	unsigned long o_groups_count;
 	ext3_grpblk_t last;
 	ext3_grpblk_t add;
 	struct buffer_head * bh;
@@ -976,7 +975,6 @@ int ext3_group_extend(struct super_block *sb, struct ext3_super_block *es,
 	 * yet: we're going to revalidate es->s_blocks_count after
 	 * taking the s_resize_lock below. */
 	o_blocks_count = le32_to_cpu(es->s_blocks_count);
-	o_groups_count = EXT3_SB(sb)->s_groups_count;
 
 	if (test_opt(sb, DEBUG))
 		printk(KERN_DEBUG "EXT3-fs: extending last group from "E3FSBLK" uto "E3FSBLK" blocks\n",
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 6c953bb255e..9650a956fd0 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -661,9 +661,6 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	 */
 	seq_puts(seq, ",barrier=");
 	seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
-	if (test_opt(sb, NOBH))
-		seq_puts(seq, ",nobh");
-
 	seq_printf(seq, ",data=%s", data_mode_string(test_opt(sb, DATA_FLAGS)));
 	if (test_opt(sb, DATA_ERR_ABORT))
 		seq_puts(seq, ",data_err=abort");
@@ -1255,10 +1252,12 @@ set_qf_format:
 			*n_blocks_count = option;
 			break;
 		case Opt_nobh:
-			set_opt(sbi->s_mount_opt, NOBH);
+			ext3_msg(sb, KERN_WARNING,
+				"warning: ignoring deprecated nobh option");
 			break;
 		case Opt_bh:
-			clear_opt(sbi->s_mount_opt, NOBH);
+			ext3_msg(sb, KERN_WARNING,
+				"warning: ignoring deprecated bh option");
 			break;
 		default:
 			ext3_msg(sb, KERN_ERR,
@@ -2001,14 +2000,6 @@ static int ext3_fill_super (struct super_block *sb, void *data, int silent)
 		break;
 	}
 
-	if (test_opt(sb, NOBH)) {
-		if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) {
-			ext3_msg(sb, KERN_WARNING,
-				"warning: ignoring nobh option - "
-				"it is supported only with writeback mode");
-			clear_opt(sbi->s_mount_opt, NOBH);
-		}
-	}
 	/*
 	 * The journal_load will have done any necessary log recovery,
 	 * so we can safely mount the rest of the filesystem now.
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index feaf498feaa..5e2ed4504ea 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -204,6 +204,7 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 				return error;
 			else {
 				inode->i_mode = mode;
+				inode->i_ctime = ext4_current_time(inode);
 				ext4_mark_inode_dirty(handle, inode);
 				if (error == 0)
 					acl = NULL;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 95b7594c76f..bd30799a43e 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -377,14 +377,11 @@ void ext4_add_groupblocks(handle_t *handle, struct super_block *sb,
 	ext4_grpblk_t bit;
 	unsigned int i;
 	struct ext4_group_desc *desc;
-	struct ext4_super_block *es;
-	struct ext4_sb_info *sbi;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	int err = 0, ret, blk_free_count;
 	ext4_grpblk_t blocks_freed;
 	struct ext4_group_info *grp;
 
-	sbi = EXT4_SB(sb);
-	es = sbi->s_es;
 	ext4_debug("Adding block(s) %llu-%llu\n", block, block + count - 1);
 
 	ext4_get_group_no_and_offset(sb, block, &block_group, &bit);
@@ -477,7 +474,6 @@ void ext4_add_groupblocks(handle_t *handle, struct super_block *sb,
 	ret = ext4_handle_dirty_metadata(handle, NULL, gd_bh);
 	if (!err)
 		err = ret;
-	sb->s_dirt = 1;
 
 error_return:
 	brelse(bitmap_bh);
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 5b6973fbf1b..3db5084db9b 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -229,16 +229,20 @@ int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk,
 
 	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
 	    (start_blk + count < start_blk) ||
-	    (start_blk + count > ext4_blocks_count(sbi->s_es)))
+	    (start_blk + count > ext4_blocks_count(sbi->s_es))) {
+		sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
 		return 0;
+	}
 	while (n) {
 		entry = rb_entry(n, struct ext4_system_zone, node);
 		if (start_blk + count - 1 < entry->start_blk)
 			n = n->rb_left;
 		else if (start_blk >= (entry->start_blk + entry->count))
 			n = n->rb_right;
-		else
+		else {
+			sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
 			return 0;
+		}
 	}
 	return 1;
 }
diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index ea5e6cb7e2a..374510f72ba 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -61,10 +61,11 @@ static unsigned char get_dtype(struct super_block *sb, int filetype)
 }
 
 
-int ext4_check_dir_entry(const char *function, struct inode *dir,
-			 struct ext4_dir_entry_2 *de,
-			 struct buffer_head *bh,
-			 unsigned int offset)
+int __ext4_check_dir_entry(const char *function, unsigned int line,
+			   struct inode *dir,
+			   struct ext4_dir_entry_2 *de,
+			   struct buffer_head *bh,
+			   unsigned int offset)
 {
 	const char *error_msg = NULL;
 	const int rlen = ext4_rec_len_from_disk(de->rec_len,
@@ -83,11 +84,10 @@ int ext4_check_dir_entry(const char *function, struct inode *dir,
 		error_msg = "inode out of bounds";
 
 	if (error_msg != NULL)
-		ext4_error_inode(function, dir,
-			"bad entry in directory: %s - block=%llu"
+		ext4_error_inode(dir, function, line, bh->b_blocknr,
+			"bad entry in directory: %s - "
 			"offset=%u(%u), inode=%u, rec_len=%d, name_len=%d",
-			error_msg, (unsigned long long) bh->b_blocknr,
-			(unsigned) (offset%bh->b_size), offset,
+			error_msg, (unsigned) (offset%bh->b_size), offset,
 			le32_to_cpu(de->inode),
 			rlen, de->name_len);
 	return error_msg == NULL ? 1 : 0;
@@ -121,7 +121,8 @@ static int ext4_readdir(struct file *filp,
 		 * We don't set the inode dirty flag since it's not
 		 * critical that it get flushed back to the disk.
 		 */
-		ext4_clear_inode_flag(filp->f_path.dentry->d_inode, EXT4_INODE_INDEX);
+		ext4_clear_inode_flag(filp->f_path.dentry->d_inode,
+				      EXT4_INODE_INDEX);
 	}
 	stored = 0;
 	offset = filp->f_pos & (sb->s_blocksize - 1);
@@ -193,7 +194,7 @@ revalidate:
 		while (!error && filp->f_pos < inode->i_size
 		       && offset < sb->s_blocksize) {
 			de = (struct ext4_dir_entry_2 *) (bh->b_data + offset);
-			if (!ext4_check_dir_entry("ext4_readdir", inode, de,
+			if (!ext4_check_dir_entry(inode, de,
 						  bh, offset)) {
 				/*
 				 * On error, skip the f_pos to the next block
@@ -343,7 +344,7 @@ int ext4_htree_store_dirent(struct file *dir_file, __u32 hash,
 	struct dir_private_info *info;
 	int len;
 
-	info = (struct dir_private_info *) dir_file->private_data;
+	info = dir_file->private_data;
 	p = &info->root.rb_node;
 
 	/* Create and allocate the fname structure */
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 19a4de57128..e03841d9f30 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -57,10 +57,13 @@
 #endif
 
 #define EXT4_ERROR_INODE(inode, fmt, a...) \
-	ext4_error_inode(__func__, (inode), (fmt), ## a)
+	ext4_error_inode((inode), __func__, __LINE__, 0, (fmt), ## a)
+
+#define EXT4_ERROR_INODE_BLOCK(inode, block, fmt, a...)			\
+	ext4_error_inode((inode), __func__, __LINE__, (block), (fmt), ## a)
 
 #define EXT4_ERROR_FILE(file, fmt, a...)	\
-	ext4_error_file(__func__, (file), (fmt), ## a)
+	ext4_error_file(__func__, __LINE__, (file), (fmt), ## a)
 
 /* data type for block offset of block group */
 typedef int ext4_grpblk_t;
@@ -167,13 +170,15 @@ struct mpage_da_data {
 };
 #define	EXT4_IO_UNWRITTEN	0x1
 typedef struct ext4_io_end {
-	struct list_head	list;		/* per-file finished AIO list */
+	struct list_head	list;		/* per-file finished IO list */
 	struct inode		*inode;		/* file being written to */
 	unsigned int		flag;		/* unwritten or not */
 	struct page		*page;		/* page struct for buffer write */
 	loff_t			offset;		/* offset in the file */
 	ssize_t			size;		/* size of the extent */
 	struct work_struct	work;		/* data work queue */
+	struct kiocb		*iocb;		/* iocb struct for AIO */
+	int			result;		/* error value for AIO */
 } ext4_io_end_t;
 
 /*
@@ -460,7 +465,7 @@ struct ext4_new_group_data {
 };
 
 /*
- * Flags used by ext4_get_blocks()
+ * Flags used by ext4_map_blocks()
  */
 	/* Allocate any needed blocks and/or convert an unitialized
 	   extent to be an initialized ext4 */
@@ -873,7 +878,6 @@ struct ext4_inode_info {
 #define EXT4_MOUNT_POSIX_ACL		0x08000	/* POSIX Access Control Lists */
 #define EXT4_MOUNT_NO_AUTO_DA_ALLOC	0x10000	/* No auto delalloc mapping */
 #define EXT4_MOUNT_BARRIER		0x20000 /* Use block barriers */
-#define EXT4_MOUNT_NOBH			0x40000 /* No bufferheads */
 #define EXT4_MOUNT_QUOTA		0x80000 /* Some quota option set */
 #define EXT4_MOUNT_USRQUOTA		0x100000 /* "old" user quota */
 #define EXT4_MOUNT_GRPQUOTA		0x200000 /* "old" group quota */
@@ -982,7 +986,7 @@ struct ext4_super_block {
 	__le32	s_last_orphan;		/* start of list of inodes to delete */
 	__le32	s_hash_seed[4];		/* HTREE hash seed */
 	__u8	s_def_hash_version;	/* Default hash version to use */
-	__u8	s_reserved_char_pad;
+	__u8	s_jnl_backup_type;
 	__le16  s_desc_size;		/* size of group descriptor */
 /*100*/	__le32	s_default_mount_opts;
 	__le32	s_first_meta_bg;	/* First metablock block group */
@@ -1000,12 +1004,34 @@ struct ext4_super_block {
 	__le64  s_mmp_block;            /* Block for multi-mount protection */
 	__le32  s_raid_stripe_width;    /* blocks on all data disks (N*stride)*/
 	__u8	s_log_groups_per_flex;  /* FLEX_BG group size */
-	__u8	s_reserved_char_pad2;
+	__u8	s_reserved_char_pad;
 	__le16  s_reserved_pad;
 	__le64	s_kbytes_written;	/* nr of lifetime kilobytes written */
-	__u32   s_reserved[160];        /* Padding to the end of the block */
+	__le32	s_snapshot_inum;	/* Inode number of active snapshot */
+	__le32	s_snapshot_id;		/* sequential ID of active snapshot */
+	__le64	s_snapshot_r_blocks_count; /* reserved blocks for active
+					      snapshot's future use */
+	__le32	s_snapshot_list;	/* inode number of the head of the
+					   on-disk snapshot list */
+#define EXT4_S_ERR_START offsetof(struct ext4_super_block, s_error_count)
+	__le32	s_error_count;		/* number of fs errors */
+	__le32	s_first_error_time;	/* first time an error happened */
+	__le32	s_first_error_ino;	/* inode involved in first error */
+	__le64	s_first_error_block;	/* block involved of first error */
+	__u8	s_first_error_func[32];	/* function where the error happened */
+	__le32	s_first_error_line;	/* line number where error happened */
+	__le32	s_last_error_time;	/* most recent time of an error */
+	__le32	s_last_error_ino;	/* inode involved in last error */
+	__le32	s_last_error_line;	/* line number where error happened */
+	__le64	s_last_error_block;	/* block involved of last error */
+	__u8	s_last_error_func[32];	/* function where the error happened */
+#define EXT4_S_ERR_END offsetof(struct ext4_super_block, s_mount_opts)
+	__u8	s_mount_opts[64];
+	__le32	s_reserved[112];        /* Padding to the end of the block */
 };
 
+#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START)
+
 #ifdef __KERNEL__
 
 /*
@@ -1143,6 +1169,9 @@ struct ext4_sb_info {
 
 	/* workqueue for dio unwritten */
 	struct workqueue_struct *dio_unwritten_wq;
+
+	/* timer for periodic error stats printing */
+	struct timer_list s_err_report;
 };
 
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
@@ -1313,6 +1342,10 @@ EXT4_INODE_BIT_FNS(state, state_flags)
 #define EXT4_DEFM_JMODE_DATA	0x0020
 #define EXT4_DEFM_JMODE_ORDERED	0x0040
 #define EXT4_DEFM_JMODE_WBACK	0x0060
+#define EXT4_DEFM_NOBARRIER	0x0100
+#define EXT4_DEFM_BLOCK_VALIDITY 0x0200
+#define EXT4_DEFM_DISCARD	0x0400
+#define EXT4_DEFM_NODELALLOC	0x0800
 
 /*
  * Default journal batch times
@@ -1379,6 +1412,43 @@ struct ext4_dir_entry_2 {
 #define EXT4_MAX_REC_LEN		((1<<16)-1)
 
 /*
+ * If we ever get support for fs block sizes > page_size, we'll need
+ * to remove the #if statements in the next two functions...
+ */
+static inline unsigned int
+ext4_rec_len_from_disk(__le16 dlen, unsigned blocksize)
+{
+	unsigned len = le16_to_cpu(dlen);
+
+#if (PAGE_CACHE_SIZE >= 65536)
+	if (len == EXT4_MAX_REC_LEN || len == 0)
+		return blocksize;
+	return (len & 65532) | ((len & 3) << 16);
+#else
+	return len;
+#endif
+}
+
+static inline __le16 ext4_rec_len_to_disk(unsigned len, unsigned blocksize)
+{
+	if ((len > blocksize) || (blocksize > (1 << 18)) || (len & 3))
+		BUG();
+#if (PAGE_CACHE_SIZE >= 65536)
+	if (len < 65536)
+		return cpu_to_le16(len);
+	if (len == blocksize) {
+		if (blocksize == 65536)
+			return cpu_to_le16(EXT4_MAX_REC_LEN);
+		else
+			return cpu_to_le16(0);
+	}
+	return cpu_to_le16((len & 65532) | ((len >> 16) & 3));
+#else
+	return cpu_to_le16(len);
+#endif
+}
+
+/*
  * Hash Tree Directory indexing
  * (c) Daniel Phillips, 2001
  */
@@ -1510,9 +1580,11 @@ extern unsigned ext4_init_block_bitmap(struct super_block *sb,
 		ext4_init_block_bitmap(sb, NULL, group, desc)
 
 /* dir.c */
-extern int ext4_check_dir_entry(const char *, struct inode *,
-				struct ext4_dir_entry_2 *,
-				struct buffer_head *, unsigned int);
+extern int __ext4_check_dir_entry(const char *, unsigned int, struct inode *,
+				  struct ext4_dir_entry_2 *,
+				  struct buffer_head *, unsigned int);
+#define ext4_check_dir_entry(dir, de, bh, offset) \
+	__ext4_check_dir_entry(__func__, __LINE__, (dir), (de), (bh), (offset))
 extern int ext4_htree_store_dirent(struct file *dir_file, __u32 hash,
 				    __u32 minor_hash,
 				    struct ext4_dir_entry_2 *dirent);
@@ -1601,8 +1673,6 @@ extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
 extern int ext4_ext_migrate(struct inode *);
 
 /* namei.c */
-extern unsigned int ext4_rec_len_from_disk(__le16 dlen, unsigned blocksize);
-extern __le16 ext4_rec_len_to_disk(unsigned len, unsigned blocksize);
 extern int ext4_orphan_add(handle_t *, struct inode *);
 extern int ext4_orphan_del(handle_t *, struct inode *);
 extern int ext4_htree_fill_tree(struct file *dir_file, __u32 start_hash,
@@ -1616,25 +1686,38 @@ extern int ext4_group_extend(struct super_block *sb,
 				ext4_fsblk_t n_blocks_count);
 
 /* super.c */
-extern void __ext4_error(struct super_block *, const char *, const char *, ...)
-	__attribute__ ((format (printf, 3, 4)));
-#define ext4_error(sb, message...)	__ext4_error(sb, __func__, ## message)
-extern void ext4_error_inode(const char *, struct inode *, const char *, ...)
-	__attribute__ ((format (printf, 3, 4)));
-extern void ext4_error_file(const char *, struct file *, const char *, ...)
-	__attribute__ ((format (printf, 3, 4)));
-extern void __ext4_std_error(struct super_block *, const char *, int);
-extern void ext4_abort(struct super_block *, const char *, const char *, ...)
-	__attribute__ ((format (printf, 3, 4)));
-extern void __ext4_warning(struct super_block *, const char *,
+extern void __ext4_error(struct super_block *, const char *, unsigned int,
+			 const char *, ...)
+	__attribute__ ((format (printf, 4, 5)));
+#define ext4_error(sb, message...)	__ext4_error(sb, __func__,	\
+						     __LINE__, ## message)
+extern void ext4_error_inode(struct inode *, const char *, unsigned int,
+			     ext4_fsblk_t, const char *, ...)
+	__attribute__ ((format (printf, 5, 6)));
+extern void ext4_error_file(struct file *, const char *, unsigned int,
+			    const char *, ...)
+	__attribute__ ((format (printf, 4, 5)));
+extern void __ext4_std_error(struct super_block *, const char *,
+			     unsigned int, int);
+extern void __ext4_abort(struct super_block *, const char *, unsigned int,
+		       const char *, ...)
+	__attribute__ ((format (printf, 4, 5)));
+#define ext4_abort(sb, message...)	__ext4_abort(sb, __func__, \
+						       __LINE__, ## message)
+extern void __ext4_warning(struct super_block *, const char *, unsigned int,
 			  const char *, ...)
-	__attribute__ ((format (printf, 3, 4)));
-#define ext4_warning(sb, message...)	__ext4_warning(sb, __func__, ## message)
+	__attribute__ ((format (printf, 4, 5)));
+#define ext4_warning(sb, message...)	__ext4_warning(sb, __func__, \
+						       __LINE__, ## message)
 extern void ext4_msg(struct super_block *, const char *, const char *, ...)
 	__attribute__ ((format (printf, 3, 4)));
-extern void ext4_grp_locked_error(struct super_block *, ext4_group_t,
-				const char *, const char *, ...)
-	__attribute__ ((format (printf, 4, 5)));
+extern void __ext4_grp_locked_error(const char *, unsigned int, \
+				    struct super_block *, ext4_group_t, \
+				    unsigned long, ext4_fsblk_t, \
+				    const char *, ...)
+	__attribute__ ((format (printf, 7, 8)));
+#define ext4_grp_locked_error(sb, grp, message...) \
+	__ext4_grp_locked_error(__func__, __LINE__, (sb), (grp), ## message)
 extern void ext4_update_dynamic_rev(struct super_block *sb);
 extern int ext4_update_compat_feature(handle_t *handle, struct super_block *sb,
 					__u32 compat);
@@ -1768,7 +1851,7 @@ static inline unsigned int ext4_flex_bg_size(struct ext4_sb_info *sbi)
 #define ext4_std_error(sb, errno)				\
 do {								\
 	if ((errno))						\
-		__ext4_std_error((sb), __func__, (errno));	\
+		__ext4_std_error((sb), __func__, __LINE__, (errno));	\
 } while (0)
 
 #ifdef CONFIG_SMP
@@ -1860,6 +1943,12 @@ static inline void ext4_unlock_group(struct super_block *sb,
 	spin_unlock(ext4_group_lock_ptr(sb, group));
 }
 
+static inline void ext4_mark_super_dirty(struct super_block *sb)
+{
+	if (EXT4_SB(sb)->s_journal == NULL)
+		sb->s_dirt =1;
+}
+
 /*
  * Inodes and files operations
  */
@@ -1905,9 +1994,6 @@ extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
 			  ssize_t len);
 extern int ext4_map_blocks(handle_t *handle, struct inode *inode,
 			   struct ext4_map_blocks *map, int flags);
-extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
-			   sector_t block, unsigned int max_blocks,
-			   struct buffer_head *bh, int flags);
 extern int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			__u64 start, __u64 len);
 /* move_extent.c */
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index 53d2764d71c..6e272ef6ba9 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -6,29 +6,29 @@
 
 #include <trace/events/ext4.h>
 
-int __ext4_journal_get_undo_access(const char *where, handle_t *handle,
-				struct buffer_head *bh)
+int __ext4_journal_get_undo_access(const char *where, unsigned int line,
+				   handle_t *handle, struct buffer_head *bh)
 {
 	int err = 0;
 
 	if (ext4_handle_valid(handle)) {
 		err = jbd2_journal_get_undo_access(handle, bh);
 		if (err)
-			ext4_journal_abort_handle(where, __func__, bh,
+			ext4_journal_abort_handle(where, line, __func__, bh,
 						  handle, err);
 	}
 	return err;
 }
 
-int __ext4_journal_get_write_access(const char *where, handle_t *handle,
-				struct buffer_head *bh)
+int __ext4_journal_get_write_access(const char *where, unsigned int line,
+				    handle_t *handle, struct buffer_head *bh)
 {
 	int err = 0;
 
 	if (ext4_handle_valid(handle)) {
 		err = jbd2_journal_get_write_access(handle, bh);
 		if (err)
-			ext4_journal_abort_handle(where, __func__, bh,
+			ext4_journal_abort_handle(where, line, __func__, bh,
 						  handle, err);
 	}
 	return err;
@@ -46,9 +46,9 @@ int __ext4_journal_get_write_access(const char *where, handle_t *handle,
  * If the handle isn't valid we're not journaling, but we still need to
  * call into ext4_journal_revoke() to put the buffer head.
  */
-int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
-		  struct inode *inode, struct buffer_head *bh,
-		  ext4_fsblk_t blocknr)
+int __ext4_forget(const char *where, unsigned int line, handle_t *handle,
+		  int is_metadata, struct inode *inode,
+		  struct buffer_head *bh, ext4_fsblk_t blocknr)
 {
 	int err;
 
@@ -79,8 +79,8 @@ int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
 			BUFFER_TRACE(bh, "call jbd2_journal_forget");
 			err = jbd2_journal_forget(handle, bh);
 			if (err)
-				ext4_journal_abort_handle(where, __func__, bh,
-							  handle, err);
+				ext4_journal_abort_handle(where, line, __func__,
+							  bh, handle, err);
 			return err;
 		}
 		return 0;
@@ -92,15 +92,16 @@ int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
 	BUFFER_TRACE(bh, "call jbd2_journal_revoke");
 	err = jbd2_journal_revoke(handle, blocknr, bh);
 	if (err) {
-		ext4_journal_abort_handle(where, __func__, bh, handle, err);
-		ext4_abort(inode->i_sb, __func__,
+		ext4_journal_abort_handle(where, line, __func__,
+					  bh, handle, err);
+		__ext4_abort(inode->i_sb, where, line,
 			   "error %d when attempting revoke", err);
 	}
 	BUFFER_TRACE(bh, "exit");
 	return err;
 }
 
-int __ext4_journal_get_create_access(const char *where,
+int __ext4_journal_get_create_access(const char *where, unsigned int line,
 				handle_t *handle, struct buffer_head *bh)
 {
 	int err = 0;
@@ -108,22 +109,23 @@ int __ext4_journal_get_create_access(const char *where,
 	if (ext4_handle_valid(handle)) {
 		err = jbd2_journal_get_create_access(handle, bh);
 		if (err)
-			ext4_journal_abort_handle(where, __func__, bh,
-						  handle, err);
+			ext4_journal_abort_handle(where, line, __func__,
+						  bh, handle, err);
 	}
 	return err;
 }
 
-int __ext4_handle_dirty_metadata(const char *where, handle_t *handle,
-				 struct inode *inode, struct buffer_head *bh)
+int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
+				 handle_t *handle, struct inode *inode,
+				 struct buffer_head *bh)
 {
 	int err = 0;
 
 	if (ext4_handle_valid(handle)) {
 		err = jbd2_journal_dirty_metadata(handle, bh);
 		if (err)
-			ext4_journal_abort_handle(where, __func__, bh,
-						  handle, err);
+			ext4_journal_abort_handle(where, line, __func__,
+						  bh, handle, err);
 	} else {
 		if (inode)
 			mark_buffer_dirty_inode(bh, inode);
@@ -132,14 +134,33 @@ int __ext4_handle_dirty_metadata(const char *where, handle_t *handle,
 		if (inode && inode_needs_sync(inode)) {
 			sync_dirty_buffer(bh);
 			if (buffer_req(bh) && !buffer_uptodate(bh)) {
-				ext4_error(inode->i_sb,
-					   "IO error syncing inode, "
-					   "inode=%lu, block=%llu",
-					   inode->i_ino,
-					   (unsigned long long) bh->b_blocknr);
+				struct ext4_super_block *es;
+
+				es = EXT4_SB(inode->i_sb)->s_es;
+				es->s_last_error_block =
+					cpu_to_le64(bh->b_blocknr);
+				ext4_error_inode(inode, where, line,
+						 bh->b_blocknr,
+					"IO error syncing itable block");
 				err = -EIO;
 			}
 		}
 	}
 	return err;
 }
+
+int __ext4_handle_dirty_super(const char *where, unsigned int line,
+			      handle_t *handle, struct super_block *sb)
+{
+	struct buffer_head *bh = EXT4_SB(sb)->s_sbh;
+	int err = 0;
+
+	if (ext4_handle_valid(handle)) {
+		err = jbd2_journal_dirty_metadata(handle, bh);
+		if (err)
+			ext4_journal_abort_handle(where, line, __func__,
+						  bh, handle, err);
+	} else
+		sb->s_dirt = 1;
+	return err;
+}
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index dade0c02479..b0bd792c58c 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -122,39 +122,47 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode);
 /*
  * Wrapper functions with which ext4 calls into JBD.
  */
-void ext4_journal_abort_handle(const char *caller, const char *err_fn,
+void ext4_journal_abort_handle(const char *caller, unsigned int line,
+			       const char *err_fn,
 		struct buffer_head *bh, handle_t *handle, int err);
 
-int __ext4_journal_get_undo_access(const char *where, handle_t *handle,
-				struct buffer_head *bh);
+int __ext4_journal_get_undo_access(const char *where, unsigned int line,
+				   handle_t *handle, struct buffer_head *bh);
 
-int __ext4_journal_get_write_access(const char *where, handle_t *handle,
-				struct buffer_head *bh);
+int __ext4_journal_get_write_access(const char *where, unsigned int line,
+				    handle_t *handle, struct buffer_head *bh);
 
-int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
-		  struct inode *inode, struct buffer_head *bh,
-		  ext4_fsblk_t blocknr);
+int __ext4_forget(const char *where, unsigned int line, handle_t *handle,
+		  int is_metadata, struct inode *inode,
+		  struct buffer_head *bh, ext4_fsblk_t blocknr);
 
-int __ext4_journal_get_create_access(const char *where,
+int __ext4_journal_get_create_access(const char *where, unsigned int line,
 				handle_t *handle, struct buffer_head *bh);
 
-int __ext4_handle_dirty_metadata(const char *where, handle_t *handle,
-				 struct inode *inode, struct buffer_head *bh);
+int __ext4_handle_dirty_metadata(const char *where, unsigned int line,
+				 handle_t *handle, struct inode *inode,
+				 struct buffer_head *bh);
+
+int __ext4_handle_dirty_super(const char *where, unsigned int line,
+			      handle_t *handle, struct super_block *sb);
 
 #define ext4_journal_get_undo_access(handle, bh) \
-	__ext4_journal_get_undo_access(__func__, (handle), (bh))
+	__ext4_journal_get_undo_access(__func__, __LINE__, (handle), (bh))
 #define ext4_journal_get_write_access(handle, bh) \
-	__ext4_journal_get_write_access(__func__, (handle), (bh))
+	__ext4_journal_get_write_access(__func__, __LINE__, (handle), (bh))
 #define ext4_forget(handle, is_metadata, inode, bh, block_nr) \
-	__ext4_forget(__func__, (handle), (is_metadata), (inode), (bh),\
-		      (block_nr))
+	__ext4_forget(__func__, __LINE__, (handle), (is_metadata), (inode), \
+		      (bh), (block_nr))
 #define ext4_journal_get_create_access(handle, bh) \
-	__ext4_journal_get_create_access(__func__, (handle), (bh))
+	__ext4_journal_get_create_access(__func__, __LINE__, (handle), (bh))
 #define ext4_handle_dirty_metadata(handle, inode, bh) \
-	__ext4_handle_dirty_metadata(__func__, (handle), (inode), (bh))
+	__ext4_handle_dirty_metadata(__func__, __LINE__, (handle), (inode), \
+				     (bh))
+#define ext4_handle_dirty_super(handle, sb) \
+	__ext4_handle_dirty_super(__func__, __LINE__, (handle), (sb))
 
 handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks);
-int __ext4_journal_stop(const char *where, handle_t *handle);
+int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle);
 
 #define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
 
@@ -207,7 +215,7 @@ static inline handle_t *ext4_journal_start(struct inode *inode, int nblocks)
 }
 
 #define ext4_journal_stop(handle) \
-	__ext4_journal_stop(__func__, (handle))
+	__ext4_journal_stop(__func__, __LINE__, (handle))
 
 static inline handle_t *ext4_journal_current_handle(void)
 {
@@ -308,17 +316,15 @@ static inline int ext4_should_writeback_data(struct inode *inode)
  * This function controls whether or not we should try to go down the
  * dioread_nolock code paths, which makes it safe to avoid taking
  * i_mutex for direct I/O reads.  This only works for extent-based
- * files, and it doesn't work for nobh or if data journaling is
- * enabled, since the dioread_nolock code uses b_private to pass
- * information back to the I/O completion handler, and this conflicts
- * with the jbd's use of b_private.
+ * files, and it doesn't work if data journaling is enabled, since the
+ * dioread_nolock code uses b_private to pass information back to the
+ * I/O completion handler, and this conflicts with the jbd's use of
+ * b_private.
  */
 static inline int ext4_should_dioread_nolock(struct inode *inode)
 {
 	if (!test_opt(inode->i_sb, DIOREAD_NOLOCK))
 		return 0;
-	if (test_opt(inode->i_sb, NOBH))
-		return 0;
 	if (!S_ISREG(inode->i_mode))
 		return 0;
 	if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index bf029c7d551..06328d3e571 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -401,9 +401,9 @@ static int ext4_valid_extent_entries(struct inode *inode,
 	return 1;
 }
 
-static int __ext4_ext_check(const char *function, struct inode *inode,
-					struct ext4_extent_header *eh,
-					int depth)
+static int __ext4_ext_check(const char *function, unsigned int line,
+			    struct inode *inode, struct ext4_extent_header *eh,
+			    int depth)
 {
 	const char *error_msg;
 	int max = 0;
@@ -436,7 +436,7 @@ static int __ext4_ext_check(const char *function, struct inode *inode,
 	return 0;
 
 corrupted:
-	ext4_error_inode(function, inode,
+	ext4_error_inode(inode, function, line, 0,
 			"bad header/extent: %s - magic %x, "
 			"entries %u, max %u(%u), depth %u(%u)",
 			error_msg, le16_to_cpu(eh->eh_magic),
@@ -447,7 +447,7 @@ corrupted:
 }
 
 #define ext4_ext_check(inode, eh, depth)	\
-	__ext4_ext_check(__func__, inode, eh, depth)
+	__ext4_ext_check(__func__, __LINE__, inode, eh, depth)
 
 int ext4_ext_check_inode(struct inode *inode)
 {
@@ -1083,7 +1083,6 @@ static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
 {
 	struct ext4_ext_path *curp = path;
 	struct ext4_extent_header *neh;
-	struct ext4_extent_idx *fidx;
 	struct buffer_head *bh;
 	ext4_fsblk_t newblock;
 	int err = 0;
@@ -1144,10 +1143,10 @@ static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
 	ext4_idx_store_pblock(curp->p_idx, newblock);
 
 	neh = ext_inode_hdr(inode);
-	fidx = EXT_FIRST_INDEX(neh);
 	ext_debug("new root: num %d(%d), lblock %d, ptr %llu\n",
 		  le16_to_cpu(neh->eh_entries), le16_to_cpu(neh->eh_max),
-		  le32_to_cpu(fidx->ei_block), idx_pblock(fidx));
+		  le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block),
+		  idx_pblock(EXT_FIRST_INDEX(neh)));
 
 	neh->eh_depth = cpu_to_le16(path->p_depth + 1);
 	err = ext4_ext_dirty(handle, inode, curp);
@@ -2954,7 +2953,6 @@ static int ext4_split_unwritten_extents(handle_t *handle,
 	struct ext4_extent *ex1 = NULL;
 	struct ext4_extent *ex2 = NULL;
 	struct ext4_extent *ex3 = NULL;
-	struct ext4_extent_header *eh;
 	ext4_lblk_t ee_block, eof_block;
 	unsigned int allocated, ee_len, depth;
 	ext4_fsblk_t newblock;
@@ -2971,7 +2969,6 @@ static int ext4_split_unwritten_extents(handle_t *handle,
 		eof_block = map->m_lblk + map->m_len;
 
 	depth = ext_depth(inode);
-	eh = path[depth].p_hdr;
 	ex = path[depth].p_ext;
 	ee_block = le32_to_cpu(ex->ee_block);
 	ee_len = ext4_ext_get_actual_len(ex);
@@ -3058,7 +3055,6 @@ static int ext4_split_unwritten_extents(handle_t *handle,
 			err = PTR_ERR(path);
 			goto out;
 		}
-		eh = path[depth].p_hdr;
 		ex = path[depth].p_ext;
 		if (ex2 != &newex)
 			ex2 = ex;
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 5313ae4cda2..ee92b66d455 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -70,7 +70,8 @@ ext4_file_write(struct kiocb *iocb, const struct iovec *iov,
 		struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 		size_t length = iov_length(iov, nr_segs);
 
-		if (pos > sbi->s_bitmap_maxbytes)
+		if ((pos > sbi->s_bitmap_maxbytes ||
+		    (pos == sbi->s_bitmap_maxbytes && length > 0)))
 			return -EFBIG;
 
 		if (pos + length > sbi->s_bitmap_maxbytes) {
@@ -123,7 +124,7 @@ static int ext4_file_open(struct inode * inode, struct file * filp)
 		if (!IS_ERR(cp)) {
 			memcpy(sbi->s_es->s_last_mounted, cp,
 			       sizeof(sbi->s_es->s_last_mounted));
-			sb->s_dirt = 1;
+			ext4_mark_super_dirty(sb);
 		}
 	}
 	return dquot_file_open(inode, filp);
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 25c4b3173fd..ac377505ed5 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -279,7 +279,7 @@ out:
 		err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
 		if (!fatal)
 			fatal = err;
-		sb->s_dirt = 1;
+		ext4_mark_super_dirty(sb);
 	} else
 		ext4_error(sb, "bit already cleared for inode %lu", ino);
 
@@ -965,7 +965,7 @@ got:
 	percpu_counter_dec(&sbi->s_freeinodes_counter);
 	if (S_ISDIR(mode))
 		percpu_counter_inc(&sbi->s_dirs_counter);
-	sb->s_dirt = 1;
+	ext4_mark_super_dirty(sb);
 
 	if (sbi->s_log_groups_per_flex) {
 		flex_group = ext4_flex_group(sbi, group);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0afc8c1d8cf..a0ab3754d0d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -221,6 +221,7 @@ void ext4_delete_inode(struct inode *inode)
 				     "couldn't extend journal (err %d)", err);
 		stop_handle:
 			ext4_journal_stop(handle);
+			ext4_orphan_del(NULL, inode);
 			goto no_delete;
 		}
 	}
@@ -337,9 +338,11 @@ static int ext4_block_to_path(struct inode *inode,
 	return n;
 }
 
-static int __ext4_check_blockref(const char *function, struct inode *inode,
+static int __ext4_check_blockref(const char *function, unsigned int line,
+				 struct inode *inode,
 				 __le32 *p, unsigned int max)
 {
+	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 	__le32 *bref = p;
 	unsigned int blk;
 
@@ -348,8 +351,9 @@ static int __ext4_check_blockref(const char *function, struct inode *inode,
 		if (blk &&
 		    unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb),
 						    blk, 1))) {
-			ext4_error_inode(function, inode,
-					 "invalid block reference %u", blk);
+			es->s_last_error_block = cpu_to_le64(blk);
+			ext4_error_inode(inode, function, line, blk,
+					 "invalid block");
 			return -EIO;
 		}
 	}
@@ -358,11 +362,13 @@ static int __ext4_check_blockref(const char *function, struct inode *inode,
 
 
 #define ext4_check_indirect_blockref(inode, bh)                         \
-	__ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data,  \
+	__ext4_check_blockref(__func__, __LINE__, inode,		\
+			      (__le32 *)(bh)->b_data,			\
 			      EXT4_ADDR_PER_BLOCK((inode)->i_sb))
 
 #define ext4_check_inode_blockref(inode)                                \
-	__ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data,   \
+	__ext4_check_blockref(__func__, __LINE__, inode,		\
+			      EXT4_I(inode)->i_data,			\
 			      EXT4_NDIR_BLOCKS)
 
 /**
@@ -1128,20 +1134,24 @@ void ext4_da_update_reserve_space(struct inode *inode,
 		ext4_discard_preallocations(inode);
 }
 
-static int check_block_validity(struct inode *inode, const char *func,
+static int __check_block_validity(struct inode *inode, const char *func,
+				unsigned int line,
 				struct ext4_map_blocks *map)
 {
 	if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), map->m_pblk,
 				   map->m_len)) {
-		ext4_error_inode(func, inode,
-			   "lblock %lu mapped to illegal pblock %llu "
-			   "(length %d)", (unsigned long) map->m_lblk,
-				 map->m_pblk, map->m_len);
+		ext4_error_inode(inode, func, line, map->m_pblk,
+				 "lblock %lu mapped to illegal pblock "
+				 "(length %d)", (unsigned long) map->m_lblk,
+				 map->m_len);
 		return -EIO;
 	}
 	return 0;
 }
 
+#define check_block_validity(inode, map)	\
+	__check_block_validity((inode), __func__, __LINE__, (map))
+
 /*
  * Return the number of contiguous dirty pages in a given inode
  * starting at page frame idx.
@@ -1244,7 +1254,7 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode,
 	up_read((&EXT4_I(inode)->i_data_sem));
 
 	if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
-		int ret = check_block_validity(inode, __func__, map);
+		int ret = check_block_validity(inode, map);
 		if (ret != 0)
 			return ret;
 	}
@@ -1324,9 +1334,7 @@ int ext4_map_blocks(handle_t *handle, struct inode *inode,
 
 	up_write((&EXT4_I(inode)->i_data_sem));
 	if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
-		int ret = check_block_validity(inode,
-					       "ext4_map_blocks_after_alloc",
-					       map);
+		int ret = check_block_validity(inode, map);
 		if (ret != 0)
 			return ret;
 	}
@@ -1519,9 +1527,25 @@ static int walk_page_buffers(handle_t *handle,
 static int do_journal_get_write_access(handle_t *handle,
 				       struct buffer_head *bh)
 {
+	int dirty = buffer_dirty(bh);
+	int ret;
+
 	if (!buffer_mapped(bh) || buffer_freed(bh))
 		return 0;
-	return ext4_journal_get_write_access(handle, bh);
+	/*
+	 * __block_prepare_write() could have dirtied some buffers. Clean
+	 * the dirty bit as jbd2_journal_get_write_access() could complain
+	 * otherwise about fs integrity issues. Setting of the dirty bit
+	 * by __block_prepare_write() isn't a real problem here as we clear
+	 * the bit before releasing a page lock and thus writeback cannot
+	 * ever write the buffer.
+	 */
+	if (dirty)
+		clear_buffer_dirty(bh);
+	ret = ext4_journal_get_write_access(handle, bh);
+	if (!ret && dirty)
+		ret = ext4_handle_dirty_metadata(handle, NULL, bh);
+	return ret;
 }
 
 /*
@@ -2194,7 +2218,7 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 	BUG_ON(!handle);
 
 	/*
-	 * Call ext4_get_blocks() to allocate any delayed allocation
+	 * Call ext4_map_blocks() to allocate any delayed allocation
 	 * blocks, or to convert an uninitialized extent to be
 	 * initialized (in the case where we have written into
 	 * one or more preallocated blocks).
@@ -2203,7 +2227,7 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 	 * indicate that we are on the delayed allocation path.  This
 	 * affects functions in many different parts of the allocation
 	 * call path.  This flag exists primarily because we don't
-	 * want to change *many* call functions, so ext4_get_blocks()
+	 * want to change *many* call functions, so ext4_map_blocks()
 	 * will set the magic i_delalloc_reserved_flag once the
 	 * inode's allocation semaphore is taken.
 	 *
@@ -2221,6 +2245,8 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 
 	blks = ext4_map_blocks(handle, mpd->inode, &map, get_blocks_flags);
 	if (blks < 0) {
+		struct super_block *sb = mpd->inode->i_sb;
+
 		err = blks;
 		/*
 		 * If get block returns with error we simply
@@ -2231,7 +2257,7 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 			return 0;
 
 		if (err == -ENOSPC &&
-		    ext4_count_free_blocks(mpd->inode->i_sb)) {
+		    ext4_count_free_blocks(sb)) {
 			mpd->retval = err;
 			return 0;
 		}
@@ -2243,16 +2269,17 @@ static int mpage_da_map_blocks(struct mpage_da_data *mpd)
 		 * writepage and writepages will again try to write
 		 * the same.
 		 */
-		ext4_msg(mpd->inode->i_sb, KERN_CRIT,
-			 "delayed block allocation failed for inode %lu at "
-			 "logical offset %llu with max blocks %zd with "
-			 "error %d", mpd->inode->i_ino,
-			 (unsigned long long) next,
-			 mpd->b_size >> mpd->inode->i_blkbits, err);
-		printk(KERN_CRIT "This should not happen!!  "
-		       "Data will be lost\n");
-		if (err == -ENOSPC) {
-			ext4_print_free_blocks(mpd->inode);
+		if (!(EXT4_SB(sb)->s_mount_flags & EXT4_MF_FS_ABORTED)) {
+			ext4_msg(sb, KERN_CRIT,
+				 "delayed block allocation failed for inode %lu "
+				 "at logical offset %llu with max blocks %zd "
+				 "with error %d", mpd->inode->i_ino,
+				 (unsigned long long) next,
+				 mpd->b_size >> mpd->inode->i_blkbits, err);
+			ext4_msg(sb, KERN_CRIT,
+				"This should not happen!! Data will be lost\n");
+			if (err == -ENOSPC)
+				ext4_print_free_blocks(mpd->inode);
 		}
 		/* invalidate all the pages */
 		ext4_da_block_invalidatepages(mpd, next,
@@ -2320,7 +2347,7 @@ static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
 	 * XXX Don't go larger than mballoc is willing to allocate
 	 * This is a stopgap solution.  We eventually need to fold
 	 * mpage_da_submit_io() into this function and then call
-	 * ext4_get_blocks() multiple times in a loop
+	 * ext4_map_blocks() multiple times in a loop
 	 */
 	if (nrblocks >= 8*1024*1024/mpd->inode->i_sb->s_blocksize)
 		goto flush_it;
@@ -2553,18 +2580,16 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
 /*
  * This function is used as a standard get_block_t calback function
  * when there is no desire to allocate any blocks.  It is used as a
- * callback function for block_prepare_write(), nobh_writepage(), and
- * block_write_full_page().  These functions should only try to map a
- * single block at a time.
+ * callback function for block_prepare_write() and block_write_full_page().
+ * These functions should only try to map a single block at a time.
  *
  * Since this function doesn't do block allocations even if the caller
  * requests it by passing in create=1, it is critically important that
  * any caller checks to make sure that any buffer heads are returned
  * by this function are either all already mapped or marked for
- * delayed allocation before calling nobh_writepage() or
- * block_write_full_page().  Otherwise, b_blocknr could be left
- * unitialized, and the page write functions will be taken by
- * surprise.
+ * delayed allocation before calling  block_write_full_page().  Otherwise,
+ * b_blocknr could be left unitialized, and the page write functions will
+ * be taken by surprise.
  */
 static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
 				   struct buffer_head *bh_result, int create)
@@ -2749,9 +2774,7 @@ static int ext4_writepage(struct page *page,
 		return __ext4_journalled_writepage(page, len);
 	}
 
-	if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
-		ret = nobh_writepage(page, noalloc_get_block_write, wbc);
-	else if (page_bufs && buffer_uninit(page_bufs)) {
+	if (page_bufs && buffer_uninit(page_bufs)) {
 		ext4_set_bh_endio(page_bufs, inode);
 		ret = block_write_full_page_endio(page, noalloc_get_block_write,
 					    wbc, ext4_end_io_buffer_write);
@@ -3146,13 +3169,10 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
 	int ret, retries = 0;
 	struct page *page;
 	pgoff_t index;
-	unsigned from, to;
 	struct inode *inode = mapping->host;
 	handle_t *handle;
 
 	index = pos >> PAGE_CACHE_SHIFT;
-	from = pos & (PAGE_CACHE_SIZE - 1);
-	to = from + len;
 
 	if (ext4_nonda_switch(inode->i_sb)) {
 		*fsdata = (void *)FALL_BACK_TO_NONDELALLOC;
@@ -3668,6 +3688,8 @@ static int ext4_end_io_nolock(ext4_io_end_t *io)
 		return ret;
 	}
 
+	if (io->iocb)
+		aio_complete(io->iocb, io->result, 0);
 	/* clear the DIO AIO unwritten flag */
 	io->flag = 0;
 	return ret;
@@ -3767,6 +3789,8 @@ static ext4_io_end_t *ext4_init_io_end (struct inode *inode, gfp_t flags)
 		io->offset = 0;
 		io->size = 0;
 		io->page = NULL;
+		io->iocb = NULL;
+		io->result = 0;
 		INIT_WORK(&io->work, ext4_end_io_work);
 		INIT_LIST_HEAD(&io->list);
 	}
@@ -3796,12 +3820,18 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
 	if (io_end->flag != EXT4_IO_UNWRITTEN){
 		ext4_free_io_end(io_end);
 		iocb->private = NULL;
-		goto out;
+out:
+		if (is_async)
+			aio_complete(iocb, ret, 0);
+		return;
 	}
 
 	io_end->offset = offset;
 	io_end->size = size;
-	io_end->flag = EXT4_IO_UNWRITTEN;
+	if (is_async) {
+		io_end->iocb = iocb;
+		io_end->result = ret;
+	}
 	wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq;
 
 	/* queue the work to convert unwritten extents to written */
@@ -3813,9 +3843,6 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
 	list_add_tail(&io_end->list, &ei->i_completed_io_list);
 	spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
 	iocb->private = NULL;
-out:
-	if (is_async)
-		aio_complete(iocb, ret, 0);
 }
 
 static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate)
@@ -3941,7 +3968,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
 				return -ENOMEM;
 			/*
 			 * we save the io structure for current async
-			 * direct IO, so that later ext4_get_blocks()
+			 * direct IO, so that later ext4_map_blocks()
 			 * could flag the io structure whether there
 			 * is a unwritten extents needs to be converted
 			 * when IO is completed.
@@ -4132,17 +4159,6 @@ int ext4_block_truncate_page(handle_t *handle,
 	length = blocksize - (offset & (blocksize - 1));
 	iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits);
 
-	/*
-	 * For "nobh" option,  we can only work if we don't need to
-	 * read-in the page - otherwise we create buffers to do the IO.
-	 */
-	if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) &&
-	     ext4_should_writeback_data(inode) && PageUptodate(page)) {
-		zero_user(page, offset, length);
-		set_page_dirty(page);
-		goto unlock;
-	}
-
 	if (!page_has_buffers(page))
 		create_empty_buffers(page, blocksize, 0);
 
@@ -4492,9 +4508,8 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode,
 			 * (should be rare).
 			 */
 			if (!bh) {
-				EXT4_ERROR_INODE(inode,
-						 "Read failure block=%llu",
-						 (unsigned long long) nr);
+				EXT4_ERROR_INODE_BLOCK(inode, nr,
+						       "Read failure");
 				continue;
 			}
 
@@ -4506,27 +4521,6 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode,
 					depth);
 
 			/*
-			 * We've probably journalled the indirect block several
-			 * times during the truncate.  But it's no longer
-			 * needed and we now drop it from the transaction via
-			 * jbd2_journal_revoke().
-			 *
-			 * That's easy if it's exclusively part of this
-			 * transaction.  But if it's part of the committing
-			 * transaction then jbd2_journal_forget() will simply
-			 * brelse() it.  That means that if the underlying
-			 * block is reallocated in ext4_get_block(),
-			 * unmap_underlying_metadata() will find this block
-			 * and will try to get rid of it.  damn, damn.
-			 *
-			 * If this block has already been committed to the
-			 * journal, a revoke record will be written.  And
-			 * revoke records must be emitted *before* clearing
-			 * this block's bit in the bitmaps.
-			 */
-			ext4_forget(handle, 1, inode, bh, bh->b_blocknr);
-
-			/*
 			 * Everything below this this pointer has been
 			 * released.  Now let this top-of-subtree go.
 			 *
@@ -4550,8 +4544,20 @@ static void ext4_free_branches(handle_t *handle, struct inode *inode,
 					    blocks_for_truncate(inode));
 			}
 
+			/*
+			 * The forget flag here is critical because if
+			 * we are journaling (and not doing data
+			 * journaling), we have to make sure a revoke
+			 * record is written to prevent the journal
+			 * replay from overwriting the (former)
+			 * indirect block if it gets reallocated as a
+			 * data block.  This must happen in the same
+			 * transaction where the data blocks are
+			 * actually freed.
+			 */
 			ext4_free_blocks(handle, inode, 0, nr, 1,
-					 EXT4_FREE_BLOCKS_METADATA);
+					 EXT4_FREE_BLOCKS_METADATA|
+					 EXT4_FREE_BLOCKS_FORGET);
 
 			if (parent_bh) {
 				/*
@@ -4809,8 +4815,8 @@ static int __ext4_get_inode_loc(struct inode *inode,
 
 	bh = sb_getblk(sb, block);
 	if (!bh) {
-		EXT4_ERROR_INODE(inode, "unable to read inode block - "
-				 "block %llu", block);
+		EXT4_ERROR_INODE_BLOCK(inode, block,
+				       "unable to read itable block");
 		return -EIO;
 	}
 	if (!buffer_uptodate(bh)) {
@@ -4908,8 +4914,8 @@ make_io:
 		submit_bh(READ_META, bh);
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
-			EXT4_ERROR_INODE(inode, "unable to read inode "
-					 "block %llu", block);
+			EXT4_ERROR_INODE_BLOCK(inode, block,
+					       "unable to read itable block");
 			brelse(bh);
 			return -EIO;
 		}
@@ -4980,7 +4986,7 @@ static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode,
 		/* we are using combined 48 bit field */
 		i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 |
 					le32_to_cpu(raw_inode->i_blocks_lo);
-		if (ei->i_flags & EXT4_HUGE_FILE_FL) {
+		if (ext4_test_inode_flag(inode, EXT4_INODE_HUGE_FILE)) {
 			/* i_blocks represent file system block size */
 			return i_blocks  << (inode->i_blkbits - 9);
 		} else {
@@ -5076,7 +5082,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 		transaction_t *transaction;
 		tid_t tid;
 
-		spin_lock(&journal->j_state_lock);
+		read_lock(&journal->j_state_lock);
 		if (journal->j_running_transaction)
 			transaction = journal->j_running_transaction;
 		else
@@ -5085,7 +5091,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 			tid = transaction->t_tid;
 		else
 			tid = journal->j_commit_sequence;
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		ei->i_sync_tid = tid;
 		ei->i_datasync_tid = tid;
 	}
@@ -5130,7 +5136,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
 				 ei->i_file_acl);
 		ret = -EIO;
 		goto bad_inode;
-	} else if (ei->i_flags & EXT4_EXTENTS_FL) {
+	} else if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
 		if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
 		    (S_ISLNK(inode->i_mode) &&
 		     !ext4_inode_is_fast_symlink(inode)))
@@ -5410,9 +5416,8 @@ int ext4_write_inode(struct inode *inode, struct writeback_control *wbc)
 		if (wbc->sync_mode == WB_SYNC_ALL)
 			sync_dirty_buffer(iloc.bh);
 		if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
-			EXT4_ERROR_INODE(inode,
-				"IO error syncing inode (block=%llu)",
-				(unsigned long long) iloc.bh->b_blocknr);
+			EXT4_ERROR_INODE_BLOCK(inode, iloc.bh->b_blocknr,
+					 "IO error syncing inode");
 			err = -EIO;
 		}
 		brelse(iloc.bh);
@@ -5487,10 +5492,8 @@ int ext4_setattr(struct dentry *dentry, struct iattr *attr)
 		if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) {
 			struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 
-			if (attr->ia_size > sbi->s_bitmap_maxbytes) {
-				error = -EFBIG;
-				goto err_out;
-			}
+			if (attr->ia_size > sbi->s_bitmap_maxbytes)
+				return -EFBIG;
 		}
 	}
 
@@ -5692,7 +5695,7 @@ int ext4_writepage_trans_blocks(struct inode *inode)
  * Calculate the journal credits for a chunk of data modification.
  *
  * This is called from DIO, fallocate or whoever calling
- * ext4_get_blocks() to map/allocate a chunk of contiguous disk blocks.
+ * ext4_map_blocks() to map/allocate a chunk of contiguous disk blocks.
  *
  * journal buffers for data blocks are not included here, as DIO
  * and fallocate do no need to journal data buffers.
@@ -5758,7 +5761,6 @@ static int ext4_expand_extra_isize(struct inode *inode,
 {
 	struct ext4_inode *raw_inode;
 	struct ext4_xattr_ibody_header *header;
-	struct ext4_xattr_entry *entry;
 
 	if (EXT4_I(inode)->i_extra_isize >= new_extra_isize)
 		return 0;
@@ -5766,7 +5768,6 @@ static int ext4_expand_extra_isize(struct inode *inode,
 	raw_inode = ext4_raw_inode(&iloc);
 
 	header = IHDR(inode, raw_inode);
-	entry = IFIRST(header);
 
 	/* No extended attributes present */
 	if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR) ||
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 0e83dfd351d..4b4ad4b7ce5 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -446,10 +446,11 @@ static void mb_free_blocks_double(struct inode *inode, struct ext4_buddy *e4b,
 			blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
 			blocknr += first + i;
 			ext4_grp_locked_error(sb, e4b->bd_group,
-				   __func__, "double-free of inode"
-				   " %lu's block %llu(bit %u in group %u)",
-				   inode ? inode->i_ino : 0, blocknr,
-				   first + i, e4b->bd_group);
+					      inode ? inode->i_ino : 0,
+					      blocknr,
+					      "freeing block already freed "
+					      "(bit %u)",
+					      first + i);
 		}
 		mb_clear_bit(first + i, e4b->bd_info->bb_bitmap);
 	}
@@ -712,9 +713,9 @@ void ext4_mb_generate_buddy(struct super_block *sb,
 	grp->bb_fragments = fragments;
 
 	if (free != grp->bb_free) {
-		ext4_grp_locked_error(sb, group,  __func__,
-			"EXT4-fs: group %u: %u blocks in bitmap, %u in gd",
-			group, free, grp->bb_free);
+		ext4_grp_locked_error(sb, group, 0, 0,
+				      "%u blocks in bitmap, %u in gd",
+				      free, grp->bb_free);
 		/*
 		 * If we intent to continue, we consider group descritor
 		 * corrupt and update bb_free using bitmap value
@@ -1296,10 +1297,10 @@ static void mb_free_blocks(struct inode *inode, struct ext4_buddy *e4b,
 			blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
 			blocknr += block;
 			ext4_grp_locked_error(sb, e4b->bd_group,
-				   __func__, "double-free of inode"
-				   " %lu's block %llu(bit %u in group %u)",
-				   inode ? inode->i_ino : 0, blocknr, block,
-				   e4b->bd_group);
+					      inode ? inode->i_ino : 0,
+					      blocknr,
+					      "freeing already freed block "
+					      "(bit %u)", block);
 		}
 		mb_clear_bit(block, EXT4_MB_BITMAP(e4b));
 		e4b->bd_info->bb_counters[order]++;
@@ -1788,8 +1789,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 			 * free blocks even though group info says we
 			 * we have free blocks
 			 */
-			ext4_grp_locked_error(sb, e4b->bd_group,
-					__func__, "%d free blocks as per "
+			ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
+					"%d free blocks as per "
 					"group info. But bitmap says 0",
 					free);
 			break;
@@ -1798,8 +1799,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 		mb_find_extent(e4b, 0, i, ac->ac_g_ex.fe_len, &ex);
 		BUG_ON(ex.fe_len <= 0);
 		if (free < ex.fe_len) {
-			ext4_grp_locked_error(sb, e4b->bd_group,
-					__func__, "%d free blocks as per "
+			ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
+					"%d free blocks as per "
 					"group info. But got %d blocks",
 					free, ex.fe_len);
 			/*
@@ -1821,8 +1822,7 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 
 /*
  * This is a special case for storages like raid5
- * we try to find stripe-aligned chunks for stripe-size requests
- * XXX should do so at least for multiples of stripe size as well
+ * we try to find stripe-aligned chunks for stripe-size-multiple requests
  */
 static noinline_for_stack
 void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
@@ -1999,7 +1999,6 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 	ext4_group_t ngroups, group, i;
 	int cr;
 	int err = 0;
-	int bsbits;
 	struct ext4_sb_info *sbi;
 	struct super_block *sb;
 	struct ext4_buddy e4b;
@@ -2041,8 +2040,6 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
 			ac->ac_2order = i - 1;
 	}
 
-	bsbits = ac->ac_sb->s_blocksize_bits;
-
 	/* if stream allocation is enabled, use global goal */
 	if (ac->ac_flags & EXT4_MB_STREAM_ALLOC) {
 		/* TBD: may be hot point */
@@ -2094,8 +2091,8 @@ repeat:
 			ac->ac_groups_scanned++;
 			if (cr == 0)
 				ext4_mb_simple_scan_group(ac, &e4b);
-			else if (cr == 1 &&
-					ac->ac_g_ex.fe_len == sbi->s_stripe)
+			else if (cr == 1 && sbi->s_stripe &&
+					!(ac->ac_g_ex.fe_len % sbi->s_stripe))
 				ext4_mb_scan_aligned(ac, &e4b);
 			else
 				ext4_mb_complex_scan_group(ac, &e4b);
@@ -2221,7 +2218,7 @@ static int ext4_mb_seq_groups_open(struct inode *inode, struct file *file)
 
 	rc = seq_open(file, &ext4_mb_seq_groups_ops);
 	if (rc == 0) {
-		struct seq_file *m = (struct seq_file *)file->private_data;
+		struct seq_file *m = file->private_data;
 		m->private = sb;
 	}
 	return rc;
@@ -2560,6 +2557,22 @@ int ext4_mb_release(struct super_block *sb)
 	return 0;
 }
 
+static inline void ext4_issue_discard(struct super_block *sb,
+		ext4_group_t block_group, ext4_grpblk_t block, int count)
+{
+	int ret;
+	ext4_fsblk_t discard_block;
+
+	discard_block = block + ext4_group_first_block_no(sb, block_group);
+	trace_ext4_discard_blocks(sb,
+			(unsigned long long) discard_block, count);
+	ret = sb_issue_discard(sb, discard_block, count);
+	if (ret == EOPNOTSUPP) {
+		ext4_warning(sb, "discard not supported, disabling");
+		clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD);
+	}
+}
+
 /*
  * This function is called by the jbd2 layer once the commit has finished,
  * so we know we can free the blocks that were released with that commit.
@@ -2579,22 +2592,9 @@ static void release_blocks_on_commit(journal_t *journal, transaction_t *txn)
 		mb_debug(1, "gonna free %u blocks in group %u (0x%p):",
 			 entry->count, entry->group, entry);
 
-		if (test_opt(sb, DISCARD)) {
-			int ret;
-			ext4_fsblk_t discard_block;
-
-			discard_block = entry->start_blk +
-				ext4_group_first_block_no(sb, entry->group);
-			trace_ext4_discard_blocks(sb,
-					(unsigned long long)discard_block,
-					entry->count);
-			ret = sb_issue_discard(sb, discard_block, entry->count);
-			if (ret == EOPNOTSUPP) {
-				ext4_warning(sb,
-					"discard not supported, disabling");
-				clear_opt(EXT4_SB(sb)->s_mount_opt, DISCARD);
-			}
-		}
+		if (test_opt(sb, DISCARD))
+			ext4_issue_discard(sb, entry->group,
+					entry->start_blk, entry->count);
 
 		err = ext4_mb_load_buddy(sb, entry->group, &e4b);
 		/* we expect to find existing buddy because it's pinned */
@@ -2712,7 +2712,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 				handle_t *handle, unsigned int reserv_blks)
 {
 	struct buffer_head *bitmap_bh = NULL;
-	struct ext4_super_block *es;
 	struct ext4_group_desc *gdp;
 	struct buffer_head *gdp_bh;
 	struct ext4_sb_info *sbi;
@@ -2725,8 +2724,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 
 	sb = ac->ac_sb;
 	sbi = EXT4_SB(sb);
-	es = sbi->s_es;
-
 
 	err = -EIO;
 	bitmap_bh = ext4_read_block_bitmap(sb, ac->ac_b_ex.fe_group);
@@ -2812,7 +2809,7 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
 	err = ext4_handle_dirty_metadata(handle, NULL, gdp_bh);
 
 out_err:
-	sb->s_dirt = 1;
+	ext4_mark_super_dirty(sb);
 	brelse(bitmap_bh);
 	return err;
 }
@@ -2850,7 +2847,7 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	int bsbits, max;
 	ext4_lblk_t end;
 	loff_t size, orig_size, start_off;
-	ext4_lblk_t start, orig_start;
+	ext4_lblk_t start;
 	struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
 	struct ext4_prealloc_space *pa;
 
@@ -2881,6 +2878,7 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 	size = size << bsbits;
 	if (size < i_size_read(ac->ac_inode))
 		size = i_size_read(ac->ac_inode);
+	orig_size = size;
 
 	/* max size of free chunks */
 	max = 2 << bsbits;
@@ -2922,8 +2920,8 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac,
 		start_off = (loff_t)ac->ac_o_ex.fe_logical << bsbits;
 		size	  = ac->ac_o_ex.fe_len << bsbits;
 	}
-	orig_size = size = size >> bsbits;
-	orig_start = start = start_off >> bsbits;
+	size = size >> bsbits;
+	start = start_off >> bsbits;
 
 	/* don't cover already allocated blocks in selected range */
 	if (ar->pleft && start <= ar->lleft) {
@@ -3547,7 +3545,6 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 	ext4_group_t group;
 	ext4_grpblk_t bit;
 	unsigned long long grp_blk_start;
-	sector_t start;
 	int err = 0;
 	int free = 0;
 
@@ -3567,10 +3564,9 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 		if (bit >= end)
 			break;
 		next = mb_find_next_bit(bitmap_bh->b_data, end, bit);
-		start = ext4_group_first_block_no(sb, group) + bit;
 		mb_debug(1, "    free preallocated %u/%u in group %u\n",
-				(unsigned) start, (unsigned) next - bit,
-				(unsigned) group);
+			 (unsigned) ext4_group_first_block_no(sb, group) + bit,
+			 (unsigned) next - bit, (unsigned) group);
 		free += next - bit;
 
 		if (ac) {
@@ -3581,7 +3577,7 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 			trace_ext4_mballoc_discard(ac);
 		}
 
-		trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
+		trace_ext4_mb_release_inode_pa(sb, ac, pa, grp_blk_start + bit,
 					       next - bit);
 		mb_free_blocks(pa->pa_inode, e4b, bit, next - bit);
 		bit = next + 1;
@@ -3591,8 +3587,7 @@ ext4_mb_release_inode_pa(struct ext4_buddy *e4b, struct buffer_head *bitmap_bh,
 			pa, (unsigned long) pa->pa_lstart,
 			(unsigned long) pa->pa_pstart,
 			(unsigned long) pa->pa_len);
-		ext4_grp_locked_error(sb, group,
-					__func__, "free %u, pa_free %u",
+		ext4_grp_locked_error(sb, group, 0, 0, "free %u, pa_free %u",
 					free, pa->pa_free);
 		/*
 		 * pa is already deleted so we use the value obtained
@@ -3613,7 +3608,7 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b,
 	ext4_group_t group;
 	ext4_grpblk_t bit;
 
-	trace_ext4_mb_release_group_pa(ac, pa);
+	trace_ext4_mb_release_group_pa(sb, ac, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
 	BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
@@ -3889,6 +3884,9 @@ static void ext4_mb_show_ac(struct ext4_allocation_context *ac)
 	struct super_block *sb = ac->ac_sb;
 	ext4_group_t ngroups, i;
 
+	if (EXT4_SB(sb)->s_mount_flags & EXT4_MF_FS_ABORTED)
+		return;
+
 	printk(KERN_ERR "EXT4-fs: Can't allocate:"
 			" Allocation context details:\n");
 	printk(KERN_ERR "EXT4-fs: status %d flags %d\n",
@@ -4255,7 +4253,7 @@ static int ext4_mb_discard_preallocations(struct super_block *sb, int needed)
  * to usual allocation
  */
 ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
-				 struct ext4_allocation_request *ar, int *errp)
+				struct ext4_allocation_request *ar, int *errp)
 {
 	int freed;
 	struct ext4_allocation_context *ac = NULL;
@@ -4299,7 +4297,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 		inquota = ar->len;
 		if (ar->len == 0) {
 			*errp = -EDQUOT;
-			goto out3;
+			goto out;
 		}
 	}
 
@@ -4307,13 +4305,13 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 	if (!ac) {
 		ar->len = 0;
 		*errp = -ENOMEM;
-		goto out1;
+		goto out;
 	}
 
 	*errp = ext4_mb_initialize_context(ac, ar);
 	if (*errp) {
 		ar->len = 0;
-		goto out2;
+		goto out;
 	}
 
 	ac->ac_op = EXT4_MB_HISTORY_PREALLOC;
@@ -4322,7 +4320,9 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
 		ext4_mb_normalize_request(ac, ar);
 repeat:
 		/* allocate space in core */
-		ext4_mb_regular_allocator(ac);
+		*errp = ext4_mb_regular_allocator(ac);
+		if (*errp)
+			goto errout;
 
 		/* as we've just preallocated more space than
 		 * user requested orinally, we store allocated
@@ -4333,7 +4333,7 @@ repeat:
 	}
 	if (likely(ac->ac_status == AC_STATUS_FOUND)) {
 		*errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_blks);
-		if (*errp ==  -EAGAIN) {
+		if (*errp == -EAGAIN) {
 			/*
 			 * drop the reference that we took
 			 * in ext4_mb_use_best_found
@@ -4344,12 +4344,10 @@ repeat:
 			ac->ac_b_ex.fe_len = 0;
 			ac->ac_status = AC_STATUS_CONTINUE;
 			goto repeat;
-		} else if (*errp) {
+		} else if (*errp)
+		errout:
 			ext4_discard_allocated_blocks(ac);
-			ac->ac_b_ex.fe_len = 0;
-			ar->len = 0;
-			ext4_mb_show_ac(ac);
-		} else {
+		else {
 			block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
 			ar->len = ac->ac_b_ex.fe_len;
 		}
@@ -4358,19 +4356,19 @@ repeat:
 		if (freed)
 			goto repeat;
 		*errp = -ENOSPC;
+	}
+
+	if (*errp) {
 		ac->ac_b_ex.fe_len = 0;
 		ar->len = 0;
 		ext4_mb_show_ac(ac);
 	}
-
 	ext4_mb_release_context(ac);
-
-out2:
-	kmem_cache_free(ext4_ac_cachep, ac);
-out1:
+out:
+	if (ac)
+		kmem_cache_free(ext4_ac_cachep, ac);
 	if (inquota && ar->len < inquota)
 		dquot_free_block(ar->inode, inquota - ar->len);
-out3:
 	if (!ar->len) {
 		if (!EXT4_I(ar->inode)->i_delalloc_reserved_flag)
 			/* release all the reserved blocks if non delalloc */
@@ -4402,6 +4400,7 @@ static noinline_for_stack int
 ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b,
 		      struct ext4_free_data *new_entry)
 {
+	ext4_group_t group = e4b->bd_group;
 	ext4_grpblk_t block;
 	struct ext4_free_data *entry;
 	struct ext4_group_info *db = e4b->bd_info;
@@ -4434,9 +4433,9 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b,
 		else if (block >= (entry->start_blk + entry->count))
 			n = &(*n)->rb_right;
 		else {
-			ext4_grp_locked_error(sb, e4b->bd_group, __func__,
-					"Double free of blocks %d (%d %d)",
-					block, entry->start_blk, entry->count);
+			ext4_grp_locked_error(sb, group, 0,
+				ext4_group_first_block_no(sb, group) + block,
+				"Block already on to-be-freed list");
 			return 0;
 		}
 	}
@@ -4494,7 +4493,6 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode,
 	struct super_block *sb = inode->i_sb;
 	struct ext4_allocation_context *ac = NULL;
 	struct ext4_group_desc *gdp;
-	struct ext4_super_block *es;
 	unsigned long freed = 0;
 	unsigned int overflow;
 	ext4_grpblk_t bit;
@@ -4513,7 +4511,6 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode,
 	}
 
 	sbi = EXT4_SB(sb);
-	es = EXT4_SB(sb)->s_es;
 	if (!(flags & EXT4_FREE_BLOCKS_VALIDATED) &&
 	    !ext4_data_block_valid(sbi, block, count)) {
 		ext4_error(sb, "Freeing blocks not in datazone - "
@@ -4647,6 +4644,8 @@ do_more:
 		mb_clear_bits(bitmap_bh->b_data, bit, count);
 		mb_free_blocks(inode, &e4b, bit, count);
 		ext4_mb_return_to_preallocation(inode, &e4b, block, count);
+		if (test_opt(sb, DISCARD))
+			ext4_issue_discard(sb, block_group, bit, count);
 	}
 
 	ret = ext4_free_blks_count(sb, gdp) + count;
@@ -4680,7 +4679,7 @@ do_more:
 		put_bh(bitmap_bh);
 		goto do_more;
 	}
-	sb->s_dirt = 1;
+	ext4_mark_super_dirty(sb);
 error_return:
 	if (freed)
 		dquot_free_block(inode, freed);
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index 6f3a27ec30b..1765c2c50a9 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -376,7 +376,7 @@ static int ext4_ext_swap_inode_data(handle_t *handle, struct inode *inode,
 	 * We have the extent map build with the tmp inode.
 	 * Now copy the i_data across
 	 */
-	ei->i_flags |= EXT4_EXTENTS_FL;
+	ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS);
 	memcpy(ei->i_data, tmp_ei->i_data, sizeof(ei->i_data));
 
 	/*
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 52abfa12762..5f1ed9fc913 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -148,17 +148,17 @@ mext_next_extent(struct inode *inode, struct ext4_ext_path *path,
  */
 static int
 mext_check_null_inode(struct inode *inode1, struct inode *inode2,
-		const char *function)
+		      const char *function, unsigned int line)
 {
 	int ret = 0;
 
 	if (inode1 == NULL) {
-		__ext4_error(inode2->i_sb, function,
+		__ext4_error(inode2->i_sb, function, line,
 			"Both inodes should not be NULL: "
 			"inode1 NULL inode2 %lu", inode2->i_ino);
 		ret = -EIO;
 	} else if (inode2 == NULL) {
-		__ext4_error(inode1->i_sb, function,
+		__ext4_error(inode1->i_sb, function, line,
 			"Both inodes should not be NULL: "
 			"inode1 %lu inode2 NULL", inode1->i_ino);
 		ret = -EIO;
@@ -1084,7 +1084,7 @@ mext_inode_double_lock(struct inode *inode1, struct inode *inode2)
 
 	BUG_ON(inode1 == NULL && inode2 == NULL);
 
-	ret = mext_check_null_inode(inode1, inode2, __func__);
+	ret = mext_check_null_inode(inode1, inode2, __func__, __LINE__);
 	if (ret < 0)
 		goto out;
 
@@ -1121,7 +1121,7 @@ mext_inode_double_unlock(struct inode *inode1, struct inode *inode2)
 
 	BUG_ON(inode1 == NULL && inode2 == NULL);
 
-	ret = mext_check_null_inode(inode1, inode2, __func__);
+	ret = mext_check_null_inode(inode1, inode2, __func__, __LINE__);
 	if (ret < 0)
 		goto out;
 
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index a43e6617b35..314c0d3b3fa 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -179,30 +179,6 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir,
 static int ext4_dx_add_entry(handle_t *handle, struct dentry *dentry,
 			     struct inode *inode);
 
-unsigned int ext4_rec_len_from_disk(__le16 dlen, unsigned blocksize)
-{
-	unsigned len = le16_to_cpu(dlen);
-
-	if (len == EXT4_MAX_REC_LEN || len == 0)
-		return blocksize;
-	return (len & 65532) | ((len & 3) << 16);
-}
-
-__le16 ext4_rec_len_to_disk(unsigned len, unsigned blocksize)
-{
-	if ((len > blocksize) || (blocksize > (1 << 18)) || (len & 3))
-		BUG();
-	if (len < 65536)
-		return cpu_to_le16(len);
-	if (len == blocksize) {
-		if (blocksize == 65536)
-			return cpu_to_le16(EXT4_MAX_REC_LEN);
-		else
-			return cpu_to_le16(0);
-	}
-	return cpu_to_le16((len & 65532) | ((len >> 16) & 3));
-}
-
 /*
  * p is at least 6 bytes before the end of page
  */
@@ -605,7 +581,7 @@ static int htree_dirblock_to_tree(struct file *dir_file,
 					   dir->i_sb->s_blocksize -
 					   EXT4_DIR_REC_LEN(0));
 	for (; de < top; de = ext4_next_entry(de, dir->i_sb->s_blocksize)) {
-		if (!ext4_check_dir_entry("htree_dirblock_to_tree", dir, de, bh,
+		if (!ext4_check_dir_entry(dir, de, bh,
 					(block<<EXT4_BLOCK_SIZE_BITS(dir->i_sb))
 						+((char *)de - bh->b_data))) {
 			/* On error, skip the f_pos to the next block. */
@@ -844,8 +820,7 @@ static inline int search_dirblock(struct buffer_head *bh,
 		if ((char *) de + namelen <= dlimit &&
 		    ext4_match (namelen, name, de)) {
 			/* found a match - just to be sure, do a full check */
-			if (!ext4_check_dir_entry("ext4_find_entry",
-						  dir, de, bh, offset))
+			if (!ext4_check_dir_entry(dir, de, bh, offset))
 				return -1;
 			*res_dir = de;
 			return 1;
@@ -1019,7 +994,7 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir, const struct q
 			int off = (block << EXT4_BLOCK_SIZE_BITS(sb))
 				  + ((char *) de - bh->b_data);
 
-			if (!ext4_check_dir_entry(__func__, dir, de, bh, off)) {
+			if (!ext4_check_dir_entry(dir, de, bh, off)) {
 				brelse(bh);
 				*err = ERR_BAD_DX_DIR;
 				goto errout;
@@ -1088,7 +1063,6 @@ static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, stru
 struct dentry *ext4_get_parent(struct dentry *child)
 {
 	__u32 ino;
-	struct inode *inode;
 	static const struct qstr dotdot = {
 		.name = "..",
 		.len = 2,
@@ -1097,7 +1071,6 @@ struct dentry *ext4_get_parent(struct dentry *child)
 	struct buffer_head *bh;
 
 	bh = ext4_find_entry(child->d_inode, &dotdot, &de);
-	inode = NULL;
 	if (!bh)
 		return ERR_PTR(-ENOENT);
 	ino = le32_to_cpu(de->inode);
@@ -1305,8 +1278,7 @@ static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry,
 		de = (struct ext4_dir_entry_2 *)bh->b_data;
 		top = bh->b_data + blocksize - reclen;
 		while ((char *) de <= top) {
-			if (!ext4_check_dir_entry("ext4_add_entry", dir, de,
-						  bh, offset))
+			if (!ext4_check_dir_entry(dir, de, bh, offset))
 				return -EIO;
 			if (ext4_match(namelen, name, de))
 				return -EEXIST;
@@ -1673,7 +1645,7 @@ static int ext4_delete_entry(handle_t *handle,
 	pde = NULL;
 	de = (struct ext4_dir_entry_2 *) bh->b_data;
 	while (i < bh->b_size) {
-		if (!ext4_check_dir_entry("ext4_delete_entry", dir, de, bh, i))
+		if (!ext4_check_dir_entry(dir, de, bh, i))
 			return -EIO;
 		if (de == de_del)  {
 			BUFFER_TRACE(bh, "get_write_access");
@@ -1956,7 +1928,7 @@ static int empty_dir(struct inode *inode)
 			}
 			de = (struct ext4_dir_entry_2 *) bh->b_data;
 		}
-		if (!ext4_check_dir_entry("empty_dir", inode, de, bh, offset)) {
+		if (!ext4_check_dir_entry(inode, de, bh, offset)) {
 			de = (struct ext4_dir_entry_2 *)(bh->b_data +
 							 sb->s_blocksize);
 			offset = (offset | (sb->s_blocksize - 1)) + 1;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 6df797eb9ae..ca5c8aa00a2 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -921,8 +921,7 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 			   &sbi->s_flex_groups[flex_group].free_inodes);
 	}
 
-	ext4_handle_dirty_metadata(handle, NULL, sbi->s_sbh);
-	sb->s_dirt = 1;
+	ext4_handle_dirty_super(handle, sb);
 
 exit_journal:
 	mutex_unlock(&sbi->s_resize_lock);
@@ -953,7 +952,6 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 		      ext4_fsblk_t n_blocks_count)
 {
 	ext4_fsblk_t o_blocks_count;
-	ext4_group_t o_groups_count;
 	ext4_grpblk_t last;
 	ext4_grpblk_t add;
 	struct buffer_head *bh;
@@ -965,7 +963,6 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 	 * yet: we're going to revalidate es->s_blocks_count after
 	 * taking the s_resize_lock below. */
 	o_blocks_count = ext4_blocks_count(es);
-	o_groups_count = EXT4_SB(sb)->s_groups_count;
 
 	if (test_opt(sb, DEBUG))
 		printk(KERN_DEBUG "EXT4-fs: extending last group from %llu uto %llu blocks\n",
@@ -1045,13 +1042,12 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es,
 		goto exit_put;
 	}
 	ext4_blocks_count_set(es, o_blocks_count + add);
-	ext4_handle_dirty_metadata(handle, NULL, EXT4_SB(sb)->s_sbh);
-	sb->s_dirt = 1;
 	mutex_unlock(&EXT4_SB(sb)->s_resize_lock);
 	ext4_debug("freeing blocks %llu through %llu\n", o_blocks_count,
 		   o_blocks_count + add);
 	/* We add the blocks to the bitmap and set the group need init bit */
 	ext4_add_groupblocks(handle, sb, o_blocks_count, add);
+	ext4_handle_dirty_super(handle, sb);
 	ext4_debug("freed blocks %llu through %llu\n", o_blocks_count,
 		   o_blocks_count + add);
 	if ((err = ext4_journal_stop(handle)))
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index e72d3235b2f..8d65575f8c8 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -241,14 +241,14 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
 	if (sb->s_flags & MS_RDONLY)
 		return ERR_PTR(-EROFS);
 
-	vfs_check_frozen(sb, SB_FREEZE_WRITE);
+	vfs_check_frozen(sb, SB_FREEZE_TRANS);
 	/* Special case here: if the journal has aborted behind our
 	 * backs (eg. EIO in the commit thread), then we still need to
 	 * take the FS itself readonly cleanly. */
 	journal = EXT4_SB(sb)->s_journal;
 	if (journal) {
 		if (is_journal_aborted(journal)) {
-			ext4_abort(sb, __func__, "Detected aborted journal");
+			ext4_abort(sb, "Detected aborted journal");
 			return ERR_PTR(-EROFS);
 		}
 		return jbd2_journal_start(journal, nblocks);
@@ -262,7 +262,7 @@ handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
  * that sync() will call the filesystem's write_super callback if
  * appropriate.
  */
-int __ext4_journal_stop(const char *where, handle_t *handle)
+int __ext4_journal_stop(const char *where, unsigned int line, handle_t *handle)
 {
 	struct super_block *sb;
 	int err;
@@ -279,12 +279,13 @@ int __ext4_journal_stop(const char *where, handle_t *handle)
 	if (!err)
 		err = rc;
 	if (err)
-		__ext4_std_error(sb, where, err);
+		__ext4_std_error(sb, where, line, err);
 	return err;
 }
 
-void ext4_journal_abort_handle(const char *caller, const char *err_fn,
-		struct buffer_head *bh, handle_t *handle, int err)
+void ext4_journal_abort_handle(const char *caller, unsigned int line,
+			       const char *err_fn, struct buffer_head *bh,
+			       handle_t *handle, int err)
 {
 	char nbuf[16];
 	const char *errstr = ext4_decode_error(NULL, err, nbuf);
@@ -300,12 +301,47 @@ void ext4_journal_abort_handle(const char *caller, const char *err_fn,
 	if (is_handle_aborted(handle))
 		return;
 
-	printk(KERN_ERR "%s: aborting transaction: %s in %s\n",
-	       caller, errstr, err_fn);
+	printk(KERN_ERR "%s:%d: aborting transaction: %s in %s\n",
+	       caller, line, errstr, err_fn);
 
 	jbd2_journal_abort_handle(handle);
 }
 
+static void __save_error_info(struct super_block *sb, const char *func,
+			    unsigned int line)
+{
+	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
+
+	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+	es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+	es->s_last_error_time = cpu_to_le32(get_seconds());
+	strncpy(es->s_last_error_func, func, sizeof(es->s_last_error_func));
+	es->s_last_error_line = cpu_to_le32(line);
+	if (!es->s_first_error_time) {
+		es->s_first_error_time = es->s_last_error_time;
+		strncpy(es->s_first_error_func, func,
+			sizeof(es->s_first_error_func));
+		es->s_first_error_line = cpu_to_le32(line);
+		es->s_first_error_ino = es->s_last_error_ino;
+		es->s_first_error_block = es->s_last_error_block;
+	}
+	/*
+	 * Start the daily error reporting function if it hasn't been
+	 * started already
+	 */
+	if (!es->s_error_count)
+		mod_timer(&EXT4_SB(sb)->s_err_report, jiffies + 24*60*60*HZ);
+	es->s_error_count = cpu_to_le32(le32_to_cpu(es->s_error_count) + 1);
+}
+
+static void save_error_info(struct super_block *sb, const char *func,
+			    unsigned int line)
+{
+	__save_error_info(sb, func, line);
+	ext4_commit_super(sb, 1);
+}
+
+
 /* Deal with the reporting of failure conditions on a filesystem such as
  * inconsistencies detected or read IO failures.
  *
@@ -323,11 +359,6 @@ void ext4_journal_abort_handle(const char *caller, const char *err_fn,
 
 static void ext4_handle_error(struct super_block *sb)
 {
-	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
-
-	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
-	es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
-
 	if (sb->s_flags & MS_RDONLY)
 		return;
 
@@ -342,19 +373,19 @@ static void ext4_handle_error(struct super_block *sb)
 		ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 		sb->s_flags |= MS_RDONLY;
 	}
-	ext4_commit_super(sb, 1);
 	if (test_opt(sb, ERRORS_PANIC))
 		panic("EXT4-fs (device %s): panic forced after error\n",
 			sb->s_id);
 }
 
 void __ext4_error(struct super_block *sb, const char *function,
-		const char *fmt, ...)
+		  unsigned int line, const char *fmt, ...)
 {
 	va_list args;
 
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: comm %s: ",
+	       sb->s_id, function, line, current->comm);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -362,14 +393,22 @@ void __ext4_error(struct super_block *sb, const char *function,
 	ext4_handle_error(sb);
 }
 
-void ext4_error_inode(const char *function, struct inode *inode,
+void ext4_error_inode(struct inode *inode, const char *function,
+		      unsigned int line, ext4_fsblk_t block,
 		      const char *fmt, ...)
 {
 	va_list args;
+	struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
 
+	es->s_last_error_ino = cpu_to_le32(inode->i_ino);
+	es->s_last_error_block = cpu_to_le64(block);
+	save_error_info(inode->i_sb, function, line);
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: inode #%lu: (comm %s) ",
-	       inode->i_sb->s_id, function, inode->i_ino, current->comm);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: inode #%lu: ",
+	       inode->i_sb->s_id, function, line, inode->i_ino);
+	if (block)
+		printk("block %llu: ", block);
+	printk("comm %s: ", current->comm);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -377,20 +416,26 @@ void ext4_error_inode(const char *function, struct inode *inode,
 	ext4_handle_error(inode->i_sb);
 }
 
-void ext4_error_file(const char *function, struct file *file,
-		     const char *fmt, ...)
+void ext4_error_file(struct file *file, const char *function,
+		     unsigned int line, const char *fmt, ...)
 {
 	va_list args;
+	struct ext4_super_block *es;
 	struct inode *inode = file->f_dentry->d_inode;
 	char pathname[80], *path;
 
+	es = EXT4_SB(inode->i_sb)->s_es;
+	es->s_last_error_ino = cpu_to_le32(inode->i_ino);
+	save_error_info(inode->i_sb, function, line);
 	va_start(args, fmt);
 	path = d_path(&(file->f_path), pathname, sizeof(pathname));
 	if (!path)
 		path = "(unknown)";
 	printk(KERN_CRIT
-	       "EXT4-fs error (device %s): %s: inode #%lu (comm %s path %s): ",
-	       inode->i_sb->s_id, function, inode->i_ino, current->comm, path);
+	       "EXT4-fs error (device %s): %s:%d: inode #%lu "
+	       "(comm %s path %s): ",
+	       inode->i_sb->s_id, function, line, inode->i_ino,
+	       current->comm, path);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
@@ -435,7 +480,8 @@ static const char *ext4_decode_error(struct super_block *sb, int errno,
 /* __ext4_std_error decodes expected errors from journaling functions
  * automatically and invokes the appropriate error response.  */
 
-void __ext4_std_error(struct super_block *sb, const char *function, int errno)
+void __ext4_std_error(struct super_block *sb, const char *function,
+		      unsigned int line, int errno)
 {
 	char nbuf[16];
 	const char *errstr;
@@ -448,8 +494,9 @@ void __ext4_std_error(struct super_block *sb, const char *function, int errno)
 		return;
 
 	errstr = ext4_decode_error(sb, errno, nbuf);
-	printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
-	       sb->s_id, function, errstr);
+	printk(KERN_CRIT "EXT4-fs error (device %s) in %s:%d: %s\n",
+	       sb->s_id, function, line, errstr);
+	save_error_info(sb, function, line);
 
 	ext4_handle_error(sb);
 }
@@ -464,29 +511,29 @@ void __ext4_std_error(struct super_block *sb, const char *function, int errno)
  * case we take the easy way out and panic immediately.
  */
 
-void ext4_abort(struct super_block *sb, const char *function,
-		const char *fmt, ...)
+void __ext4_abort(struct super_block *sb, const char *function,
+		unsigned int line, const char *fmt, ...)
 {
 	va_list args;
 
+	save_error_info(sb, function, line);
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: ", sb->s_id,
+	       function, line);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
 
+	if ((sb->s_flags & MS_RDONLY) == 0) {
+		ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
+		sb->s_flags |= MS_RDONLY;
+		EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
+		if (EXT4_SB(sb)->s_journal)
+			jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
+		save_error_info(sb, function, line);
+	}
 	if (test_opt(sb, ERRORS_PANIC))
 		panic("EXT4-fs panic from previous error\n");
-
-	if (sb->s_flags & MS_RDONLY)
-		return;
-
-	ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
-	EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
-	sb->s_flags |= MS_RDONLY;
-	EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
-	if (EXT4_SB(sb)->s_journal)
-		jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
 }
 
 void ext4_msg (struct super_block * sb, const char *prefix,
@@ -502,38 +549,47 @@ void ext4_msg (struct super_block * sb, const char *prefix,
 }
 
 void __ext4_warning(struct super_block *sb, const char *function,
-		  const char *fmt, ...)
+		    unsigned int line, const char *fmt, ...)
 {
 	va_list args;
 
 	va_start(args, fmt);
-	printk(KERN_WARNING "EXT4-fs warning (device %s): %s: ",
-	       sb->s_id, function);
+	printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: ",
+	       sb->s_id, function, line);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
 }
 
-void ext4_grp_locked_error(struct super_block *sb, ext4_group_t grp,
-			   const char *function, const char *fmt, ...)
+void __ext4_grp_locked_error(const char *function, unsigned int line,
+			     struct super_block *sb, ext4_group_t grp,
+			     unsigned long ino, ext4_fsblk_t block,
+			     const char *fmt, ...)
 __releases(bitlock)
 __acquires(bitlock)
 {
 	va_list args;
 	struct ext4_super_block *es = EXT4_SB(sb)->s_es;
 
+	es->s_last_error_ino = cpu_to_le32(ino);
+	es->s_last_error_block = cpu_to_le64(block);
+	__save_error_info(sb, function, line);
 	va_start(args, fmt);
-	printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
+	printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: group %u",
+	       sb->s_id, function, line, grp);
+	if (ino)
+		printk("inode %lu: ", ino);
+	if (block)
+		printk("block %llu:", (unsigned long long) block);
 	vprintk(fmt, args);
 	printk("\n");
 	va_end(args);
 
 	if (test_opt(sb, ERRORS_CONT)) {
-		EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
-		es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
 		ext4_commit_super(sb, 0);
 		return;
 	}
+
 	ext4_unlock_group(sb, grp);
 	ext4_handle_error(sb);
 	/*
@@ -660,8 +716,7 @@ static void ext4_put_super(struct super_block *sb)
 		err = jbd2_journal_destroy(sbi->s_journal);
 		sbi->s_journal = NULL;
 		if (err < 0)
-			ext4_abort(sb, __func__,
-				   "Couldn't clean up the journal");
+			ext4_abort(sb, "Couldn't clean up the journal");
 	}
 
 	ext4_release_system_zone(sb);
@@ -946,14 +1001,12 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
 		seq_puts(seq, ",journal_async_commit");
 	else if (test_opt(sb, JOURNAL_CHECKSUM))
 		seq_puts(seq, ",journal_checksum");
-	if (test_opt(sb, NOBH))
-		seq_puts(seq, ",nobh");
 	if (test_opt(sb, I_VERSION))
 		seq_puts(seq, ",i_version");
-	if (!test_opt(sb, DELALLOC))
+	if (!test_opt(sb, DELALLOC) &&
+	    !(def_mount_opts & EXT4_DEFM_NODELALLOC))
 		seq_puts(seq, ",nodelalloc");
 
-
 	if (sbi->s_stripe)
 		seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
 	/*
@@ -977,7 +1030,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (test_opt(sb, NO_AUTO_DA_ALLOC))
 		seq_puts(seq, ",noauto_da_alloc");
 
-	if (test_opt(sb, DISCARD))
+	if (test_opt(sb, DISCARD) && !(def_mount_opts & EXT4_DEFM_DISCARD))
 		seq_puts(seq, ",discard");
 
 	if (test_opt(sb, NOLOAD))
@@ -986,6 +1039,10 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	if (test_opt(sb, DIOREAD_NOLOCK))
 		seq_puts(seq, ",dioread_nolock");
 
+	if (test_opt(sb, BLOCK_VALIDITY) &&
+	    !(def_mount_opts & EXT4_DEFM_BLOCK_VALIDITY))
+		seq_puts(seq, ",block_validity");
+
 	ext4_show_quota_options(seq, sb);
 
 	return 0;
@@ -1065,6 +1122,7 @@ static int ext4_mark_dquot_dirty(struct dquot *dquot);
 static int ext4_write_info(struct super_block *sb, int type);
 static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 				char *path);
+static int ext4_quota_off(struct super_block *sb, int type);
 static int ext4_quota_on_mount(struct super_block *sb, int type);
 static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
 			       size_t len, loff_t off);
@@ -1086,7 +1144,7 @@ static const struct dquot_operations ext4_quota_operations = {
 
 static const struct quotactl_ops ext4_qctl_operations = {
 	.quota_on	= ext4_quota_on,
-	.quota_off	= dquot_quota_off,
+	.quota_off	= ext4_quota_off,
 	.quota_sync	= dquot_quota_sync,
 	.get_info	= dquot_get_dqinfo,
 	.set_info	= dquot_set_dqinfo,
@@ -1624,10 +1682,12 @@ set_qf_format:
 			*n_blocks_count = option;
 			break;
 		case Opt_nobh:
-			set_opt(sbi->s_mount_opt, NOBH);
+			ext4_msg(sb, KERN_WARNING,
+				 "Ignoring deprecated nobh option");
 			break;
 		case Opt_bh:
-			clear_opt(sbi->s_mount_opt, NOBH);
+			ext4_msg(sb, KERN_WARNING,
+				 "Ignoring deprecated bh option");
 			break;
 		case Opt_i_version:
 			set_opt(sbi->s_mount_opt, I_VERSION);
@@ -2249,6 +2309,8 @@ static ssize_t session_write_kbytes_show(struct ext4_attr *a,
 {
 	struct super_block *sb = sbi->s_buddy_cache->i_sb;
 
+	if (!sb->s_bdev->bd_part)
+		return snprintf(buf, PAGE_SIZE, "0\n");
 	return snprintf(buf, PAGE_SIZE, "%lu\n",
 			(part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
 			 sbi->s_sectors_written_start) >> 1);
@@ -2259,6 +2321,8 @@ static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a,
 {
 	struct super_block *sb = sbi->s_buddy_cache->i_sb;
 
+	if (!sb->s_bdev->bd_part)
+		return snprintf(buf, PAGE_SIZE, "0\n");
 	return snprintf(buf, PAGE_SIZE, "%llu\n",
 			(unsigned long long)(sbi->s_kbytes_written +
 			((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
@@ -2431,6 +2495,53 @@ static int ext4_feature_set_ok(struct super_block *sb, int readonly)
 	return 1;
 }
 
+/*
+ * This function is called once a day if we have errors logged
+ * on the file system
+ */
+static void print_daily_error_info(unsigned long arg)
+{
+	struct super_block *sb = (struct super_block *) arg;
+	struct ext4_sb_info *sbi;
+	struct ext4_super_block *es;
+
+	sbi = EXT4_SB(sb);
+	es = sbi->s_es;
+
+	if (es->s_error_count)
+		ext4_msg(sb, KERN_NOTICE, "error count: %u",
+			 le32_to_cpu(es->s_error_count));
+	if (es->s_first_error_time) {
+		printk(KERN_NOTICE "EXT4-fs (%s): initial error at %u: %.*s:%d",
+		       sb->s_id, le32_to_cpu(es->s_first_error_time),
+		       (int) sizeof(es->s_first_error_func),
+		       es->s_first_error_func,
+		       le32_to_cpu(es->s_first_error_line));
+		if (es->s_first_error_ino)
+			printk(": inode %u",
+			       le32_to_cpu(es->s_first_error_ino));
+		if (es->s_first_error_block)
+			printk(": block %llu", (unsigned long long)
+			       le64_to_cpu(es->s_first_error_block));
+		printk("\n");
+	}
+	if (es->s_last_error_time) {
+		printk(KERN_NOTICE "EXT4-fs (%s): last error at %u: %.*s:%d",
+		       sb->s_id, le32_to_cpu(es->s_last_error_time),
+		       (int) sizeof(es->s_last_error_func),
+		       es->s_last_error_func,
+		       le32_to_cpu(es->s_last_error_line));
+		if (es->s_last_error_ino)
+			printk(": inode %u",
+			       le32_to_cpu(es->s_last_error_ino));
+		if (es->s_last_error_block)
+			printk(": block %llu", (unsigned long long)
+			       le64_to_cpu(es->s_last_error_block));
+		printk("\n");
+	}
+	mod_timer(&sbi->s_err_report, jiffies + 24*60*60*HZ);  /* Once a day */
+}
+
 static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 				__releases(kernel_lock)
 				__acquires(kernel_lock)
@@ -2448,7 +2559,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	struct inode *root;
 	char *cp;
 	const char *descr;
-	int ret = -EINVAL;
+	int ret = -ENOMEM;
 	int blocksize;
 	unsigned int db_count;
 	unsigned int i;
@@ -2459,13 +2570,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 
 	sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
 	if (!sbi)
-		return -ENOMEM;
+		goto out_free_orig;
 
 	sbi->s_blockgroup_lock =
 		kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
 	if (!sbi->s_blockgroup_lock) {
 		kfree(sbi);
-		return -ENOMEM;
+		goto out_free_orig;
 	}
 	sb->s_fs_info = sbi;
 	sbi->s_mount_opt = 0;
@@ -2473,8 +2584,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_resgid = EXT4_DEF_RESGID;
 	sbi->s_inode_readahead_blks = EXT4_DEF_INODE_READAHEAD_BLKS;
 	sbi->s_sb_block = sb_block;
-	sbi->s_sectors_written_start = part_stat_read(sb->s_bdev->bd_part,
-						      sectors[1]);
+	if (sb->s_bdev->bd_part)
+		sbi->s_sectors_written_start =
+			part_stat_read(sb->s_bdev->bd_part, sectors[1]);
 
 	unlock_kernel();
 
@@ -2482,6 +2594,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	for (cp = sb->s_id; (cp = strchr(cp, '/'));)
 		*cp = '!';
 
+	ret = -EINVAL;
 	blocksize = sb_min_blocksize(sb, EXT4_MIN_BLOCK_SIZE);
 	if (!blocksize) {
 		ext4_msg(sb, KERN_ERR, "unable to set blocksize");
@@ -2546,6 +2659,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		set_opt(sbi->s_mount_opt, ERRORS_CONT);
 	else
 		set_opt(sbi->s_mount_opt, ERRORS_RO);
+	if (def_mount_opts & EXT4_DEFM_BLOCK_VALIDITY)
+		set_opt(sbi->s_mount_opt, BLOCK_VALIDITY);
+	if (def_mount_opts & EXT4_DEFM_DISCARD)
+		set_opt(sbi->s_mount_opt, DISCARD);
 
 	sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
 	sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
@@ -2553,15 +2670,23 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
 
-	set_opt(sbi->s_mount_opt, BARRIER);
+	if ((def_mount_opts & EXT4_DEFM_NOBARRIER) == 0)
+		set_opt(sbi->s_mount_opt, BARRIER);
 
 	/*
 	 * enable delayed allocation by default
 	 * Use -o nodelalloc to turn it off
 	 */
-	if (!IS_EXT3_SB(sb))
+	if (!IS_EXT3_SB(sb) &&
+	    ((def_mount_opts & EXT4_DEFM_NODELALLOC) == 0))
 		set_opt(sbi->s_mount_opt, DELALLOC);
 
+	if (!parse_options((char *) sbi->s_es->s_mount_opts, sb,
+			   &journal_devnum, &journal_ioprio, NULL, 0)) {
+		ext4_msg(sb, KERN_WARNING,
+			 "failed to parse options in superblock: %s",
+			 sbi->s_es->s_mount_opts);
+	}
 	if (!parse_options((char *) data, sb, &journal_devnum,
 			   &journal_ioprio, NULL, 0))
 		goto failed_mount;
@@ -2912,18 +3037,7 @@ no_journal:
 		ext4_msg(sb, KERN_ERR, "insufficient memory");
 		goto failed_mount_wq;
 	}
-	if (test_opt(sb, NOBH)) {
-		if (!(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)) {
-			ext4_msg(sb, KERN_WARNING, "Ignoring nobh option - "
-				"its supported only with writeback mode");
-			clear_opt(sbi->s_mount_opt, NOBH);
-		}
-		if (test_opt(sb, DIOREAD_NOLOCK)) {
-			ext4_msg(sb, KERN_WARNING, "dioread_nolock option is "
-				"not supported with nobh mode");
-			goto failed_mount_wq;
-		}
-	}
+
 	EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
 	if (!EXT4_SB(sb)->dio_unwritten_wq) {
 		printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
@@ -3043,7 +3157,14 @@ no_journal:
 		descr = "out journal";
 
 	ext4_msg(sb, KERN_INFO, "mounted filesystem with%s. "
-		"Opts: %s", descr, orig_data);
+		 "Opts: %s%s%s", descr, sbi->s_es->s_mount_opts,
+		 *sbi->s_es->s_mount_opts ? "; " : "", orig_data);
+
+	init_timer(&sbi->s_err_report);
+	sbi->s_err_report.function = print_daily_error_info;
+	sbi->s_err_report.data = (unsigned long) sb;
+	if (es->s_error_count)
+		mod_timer(&sbi->s_err_report, jiffies + 300*HZ); /* 5 minutes */
 
 	lock_kernel();
 	kfree(orig_data);
@@ -3093,6 +3214,7 @@ out_fail:
 	kfree(sbi->s_blockgroup_lock);
 	kfree(sbi);
 	lock_kernel();
+out_free_orig:
 	kfree(orig_data);
 	return ret;
 }
@@ -3110,7 +3232,7 @@ static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
 	journal->j_min_batch_time = sbi->s_min_batch_time;
 	journal->j_max_batch_time = sbi->s_max_batch_time;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	if (test_opt(sb, BARRIER))
 		journal->j_flags |= JBD2_BARRIER;
 	else
@@ -3119,7 +3241,7 @@ static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
 		journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR;
 	else
 		journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 static journal_t *ext4_get_journal(struct super_block *sb,
@@ -3327,8 +3449,17 @@ static int ext4_load_journal(struct super_block *sb,
 
 	if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER))
 		err = jbd2_journal_wipe(journal, !really_read_only);
-	if (!err)
+	if (!err) {
+		char *save = kmalloc(EXT4_S_ERR_LEN, GFP_KERNEL);
+		if (save)
+			memcpy(save, ((char *) es) +
+			       EXT4_S_ERR_START, EXT4_S_ERR_LEN);
 		err = jbd2_journal_load(journal);
+		if (save)
+			memcpy(((char *) es) + EXT4_S_ERR_START,
+			       save, EXT4_S_ERR_LEN);
+		kfree(save);
+	}
 
 	if (err) {
 		ext4_msg(sb, KERN_ERR, "error loading journal");
@@ -3384,10 +3515,14 @@ static int ext4_commit_super(struct super_block *sb, int sync)
 	 */
 	if (!(sb->s_flags & MS_RDONLY))
 		es->s_wtime = cpu_to_le32(get_seconds());
-	es->s_kbytes_written =
-		cpu_to_le64(EXT4_SB(sb)->s_kbytes_written +
+	if (sb->s_bdev->bd_part)
+		es->s_kbytes_written =
+			cpu_to_le64(EXT4_SB(sb)->s_kbytes_written +
 			    ((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
 			      EXT4_SB(sb)->s_sectors_written_start) >> 1));
+	else
+		es->s_kbytes_written =
+			cpu_to_le64(EXT4_SB(sb)->s_kbytes_written);
 	ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
 					&EXT4_SB(sb)->s_freeblocks_counter));
 	es->s_free_inodes_count = cpu_to_le32(percpu_counter_sum_positive(
@@ -3491,7 +3626,7 @@ int ext4_force_commit(struct super_block *sb)
 
 	journal = EXT4_SB(sb)->s_journal;
 	if (journal) {
-		vfs_check_frozen(sb, SB_FREEZE_WRITE);
+		vfs_check_frozen(sb, SB_FREEZE_TRANS);
 		ret = ext4_journal_force_commit(journal);
 	}
 
@@ -3616,7 +3751,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data)
 	}
 
 	if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
-		ext4_abort(sb, __func__, "Abort forced by user");
+		ext4_abort(sb, "Abort forced by user");
 
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
 		(test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
@@ -3981,6 +4116,18 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	return err;
 }
 
+static int ext4_quota_off(struct super_block *sb, int type)
+{
+	/* Force all delayed allocation blocks to be allocated */
+	if (test_opt(sb, DELALLOC)) {
+		down_read(&sb->s_umount);
+		sync_filesystem(sb);
+		up_read(&sb->s_umount);
+	}
+
+	return dquot_quota_off(sb, type);
+}
+
 /* Read data from quotafile - avoid pagecache and such because we cannot afford
  * acquiring the locks... As quota files are never truncated and quota code
  * itself serializes the operations (and noone else should touch the files)
@@ -4030,7 +4177,6 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type,
 	ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
 	int err = 0;
 	int offset = off & (sb->s_blocksize - 1);
-	int journal_quota = EXT4_SB(sb)->s_qf_names[type] != NULL;
 	struct buffer_head *bh;
 	handle_t *handle = journal_current_handle();
 
@@ -4055,24 +4201,16 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type,
 	bh = ext4_bread(handle, inode, blk, 1, &err);
 	if (!bh)
 		goto out;
-	if (journal_quota) {
-		err = ext4_journal_get_write_access(handle, bh);
-		if (err) {
-			brelse(bh);
-			goto out;
-		}
+	err = ext4_journal_get_write_access(handle, bh);
+	if (err) {
+		brelse(bh);
+		goto out;
 	}
 	lock_buffer(bh);
 	memcpy(bh->b_data+offset, data, len);
 	flush_dcache_page(bh->b_page);
 	unlock_buffer(bh);
-	if (journal_quota)
-		err = ext4_handle_dirty_metadata(handle, NULL, bh);
-	else {
-		/* Always do at least ordered writes for quotas */
-		err = ext4_jbd2_file_inode(handle, inode);
-		mark_buffer_dirty(bh);
-	}
+	err = ext4_handle_dirty_metadata(handle, NULL, bh);
 	brelse(bh);
 out:
 	if (err) {
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 04338009793..a6f31424957 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -458,8 +458,7 @@ static void ext4_xattr_update_super_block(handle_t *handle,
 
 	if (ext4_journal_get_write_access(handle, EXT4_SB(sb)->s_sbh) == 0) {
 		EXT4_SET_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_EXT_ATTR);
-		sb->s_dirt = 1;
-		ext4_handle_dirty_metadata(handle, NULL, EXT4_SB(sb)->s_sbh);
+		ext4_handle_dirty_super(handle, sb);
 	}
 }
 
diff --git a/fs/file.c b/fs/file.c
index 34bb7f71d99..cccaead962c 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -178,7 +178,6 @@ static struct fdtable * alloc_fdtable(unsigned int nr)
 	fdt->open_fds = (fd_set *)data;
 	data += nr / BITS_PER_BYTE;
 	fdt->close_on_exec = (fd_set *)data;
-	INIT_RCU_HEAD(&fdt->rcu);
 	fdt->next = NULL;
 
 	return fdt;
@@ -312,7 +311,6 @@ struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
 	new_fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
 	new_fdt->open_fds = (fd_set *)&newf->open_fds_init;
 	new_fdt->fd = &newf->fd_array[0];
-	INIT_RCU_HEAD(&new_fdt->rcu);
 	new_fdt->next = NULL;
 
 	spin_lock(&oldf->file_lock);
@@ -430,7 +428,6 @@ struct files_struct init_files = {
 		.fd		= &init_files.fd_array[0],
 		.close_on_exec	= (fd_set *)&init_files.close_on_exec_init,
 		.open_fds	= (fd_set *)&init_files.open_fds_init,
-		.rcu		= RCU_HEAD_INIT,
 	},
 	.file_lock	= __SPIN_LOCK_UNLOCKED(init_task.file_lock),
 };
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index d5be1693ac9..30ac305e829 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -530,7 +530,8 @@ void writeback_inodes_wb(struct bdi_writeback *wb,
 {
 	int ret = 0;
 
-	wbc->wb_start = jiffies; /* livelock avoidance */
+	if (!wbc->wb_start)
+		wbc->wb_start = jiffies; /* livelock avoidance */
 	spin_lock(&inode_lock);
 	if (!wbc->for_kupdate || list_empty(&wb->b_io))
 		queue_io(wb, wbc->older_than_this);
@@ -559,7 +560,6 @@ static void __writeback_inodes_sb(struct super_block *sb,
 {
 	WARN_ON(!rwsem_is_locked(&sb->s_umount));
 
-	wbc->wb_start = jiffies; /* livelock avoidance */
 	spin_lock(&inode_lock);
 	if (!wbc->for_kupdate || list_empty(&wb->b_io))
 		queue_io(wb, wbc->older_than_this);
@@ -625,6 +625,7 @@ static long wb_writeback(struct bdi_writeback *wb,
 		wbc.range_end = LLONG_MAX;
 	}
 
+	wbc.wb_start = jiffies; /* livelock avoidance */
 	for (;;) {
 		/*
 		 * Stop writeback when nr_pages has been consumed
diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig
index cc94bb9563f..3f6dfa98988 100644
--- a/fs/fscache/Kconfig
+++ b/fs/fscache/Kconfig
@@ -1,7 +1,6 @@
 
 config FSCACHE
 	tristate "General filesystem local caching manager"
-	select SLOW_WORK
 	help
 	  This option enables a generic filesystem caching manager that can be
 	  used by various network and other filesystems to cache data locally.
diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h
index edd7434ab6e..6a026441c5a 100644
--- a/fs/fscache/internal.h
+++ b/fs/fscache/internal.h
@@ -82,6 +82,14 @@ extern unsigned fscache_defer_lookup;
 extern unsigned fscache_defer_create;
 extern unsigned fscache_debug;
 extern struct kobject *fscache_root;
+extern struct workqueue_struct *fscache_object_wq;
+extern struct workqueue_struct *fscache_op_wq;
+DECLARE_PER_CPU(wait_queue_head_t, fscache_object_cong_wait);
+
+static inline bool fscache_object_congested(void)
+{
+	return workqueue_congested(WORK_CPU_UNBOUND, fscache_object_wq);
+}
 
 extern int fscache_wait_bit(void *);
 extern int fscache_wait_bit_interruptible(void *);
diff --git a/fs/fscache/main.c b/fs/fscache/main.c
index add6bdb53f0..f9d856773f7 100644
--- a/fs/fscache/main.c
+++ b/fs/fscache/main.c
@@ -15,6 +15,7 @@
 #include <linux/sched.h>
 #include <linux/completion.h>
 #include <linux/slab.h>
+#include <linux/seq_file.h>
 #include "internal.h"
 
 MODULE_DESCRIPTION("FS Cache Manager");
@@ -40,22 +41,105 @@ MODULE_PARM_DESC(fscache_debug,
 		 "FS-Cache debugging mask");
 
 struct kobject *fscache_root;
+struct workqueue_struct *fscache_object_wq;
+struct workqueue_struct *fscache_op_wq;
+
+DEFINE_PER_CPU(wait_queue_head_t, fscache_object_cong_wait);
+
+/* these values serve as lower bounds, will be adjusted in fscache_init() */
+static unsigned fscache_object_max_active = 4;
+static unsigned fscache_op_max_active = 2;
+
+#ifdef CONFIG_SYSCTL
+static struct ctl_table_header *fscache_sysctl_header;
+
+static int fscache_max_active_sysctl(struct ctl_table *table, int write,
+				     void __user *buffer,
+				     size_t *lenp, loff_t *ppos)
+{
+	struct workqueue_struct **wqp = table->extra1;
+	unsigned int *datap = table->data;
+	int ret;
+
+	ret = proc_dointvec(table, write, buffer, lenp, ppos);
+	if (ret == 0)
+		workqueue_set_max_active(*wqp, *datap);
+	return ret;
+}
+
+ctl_table fscache_sysctls[] = {
+	{
+		.procname	= "object_max_active",
+		.data		= &fscache_object_max_active,
+		.maxlen		= sizeof(unsigned),
+		.mode		= 0644,
+		.proc_handler	= fscache_max_active_sysctl,
+		.extra1		= &fscache_object_wq,
+	},
+	{
+		.procname	= "operation_max_active",
+		.data		= &fscache_op_max_active,
+		.maxlen		= sizeof(unsigned),
+		.mode		= 0644,
+		.proc_handler	= fscache_max_active_sysctl,
+		.extra1		= &fscache_op_wq,
+	},
+	{}
+};
+
+ctl_table fscache_sysctls_root[] = {
+	{
+		.procname	= "fscache",
+		.mode		= 0555,
+		.child		= fscache_sysctls,
+	},
+	{}
+};
+#endif
 
 /*
  * initialise the fs caching module
  */
 static int __init fscache_init(void)
 {
+	unsigned int nr_cpus = num_possible_cpus();
+	unsigned int cpu;
 	int ret;
 
-	ret = slow_work_register_user(THIS_MODULE);
-	if (ret < 0)
-		goto error_slow_work;
+	fscache_object_max_active =
+		clamp_val(nr_cpus,
+			  fscache_object_max_active, WQ_UNBOUND_MAX_ACTIVE);
+
+	ret = -ENOMEM;
+	fscache_object_wq = alloc_workqueue("fscache_object", WQ_UNBOUND,
+					    fscache_object_max_active);
+	if (!fscache_object_wq)
+		goto error_object_wq;
+
+	fscache_op_max_active =
+		clamp_val(fscache_object_max_active / 2,
+			  fscache_op_max_active, WQ_UNBOUND_MAX_ACTIVE);
+
+	ret = -ENOMEM;
+	fscache_op_wq = alloc_workqueue("fscache_operation", WQ_UNBOUND,
+					fscache_op_max_active);
+	if (!fscache_op_wq)
+		goto error_op_wq;
+
+	for_each_possible_cpu(cpu)
+		init_waitqueue_head(&per_cpu(fscache_object_cong_wait, cpu));
 
 	ret = fscache_proc_init();
 	if (ret < 0)
 		goto error_proc;
 
+#ifdef CONFIG_SYSCTL
+	ret = -ENOMEM;
+	fscache_sysctl_header = register_sysctl_table(fscache_sysctls_root);
+	if (!fscache_sysctl_header)
+		goto error_sysctl;
+#endif
+
 	fscache_cookie_jar = kmem_cache_create("fscache_cookie_jar",
 					       sizeof(struct fscache_cookie),
 					       0,
@@ -78,10 +162,16 @@ static int __init fscache_init(void)
 error_kobj:
 	kmem_cache_destroy(fscache_cookie_jar);
 error_cookie_jar:
+#ifdef CONFIG_SYSCTL
+	unregister_sysctl_table(fscache_sysctl_header);
+error_sysctl:
+#endif
 	fscache_proc_cleanup();
 error_proc:
-	slow_work_unregister_user(THIS_MODULE);
-error_slow_work:
+	destroy_workqueue(fscache_op_wq);
+error_op_wq:
+	destroy_workqueue(fscache_object_wq);
+error_object_wq:
 	return ret;
 }
 
@@ -96,8 +186,12 @@ static void __exit fscache_exit(void)
 
 	kobject_put(fscache_root);
 	kmem_cache_destroy(fscache_cookie_jar);
+#ifdef CONFIG_SYSCTL
+	unregister_sysctl_table(fscache_sysctl_header);
+#endif
 	fscache_proc_cleanup();
-	slow_work_unregister_user(THIS_MODULE);
+	destroy_workqueue(fscache_op_wq);
+	destroy_workqueue(fscache_object_wq);
 	printk(KERN_NOTICE "FS-Cache: Unloaded\n");
 }
 
diff --git a/fs/fscache/object-list.c b/fs/fscache/object-list.c
index 4a8eb31c533..ebe29c58138 100644
--- a/fs/fscache/object-list.c
+++ b/fs/fscache/object-list.c
@@ -34,8 +34,8 @@ struct fscache_objlist_data {
 #define FSCACHE_OBJLIST_CONFIG_NOREADS	0x00000200	/* show objects without active reads */
 #define FSCACHE_OBJLIST_CONFIG_EVENTS	0x00000400	/* show objects with events */
 #define FSCACHE_OBJLIST_CONFIG_NOEVENTS	0x00000800	/* show objects without no events */
-#define FSCACHE_OBJLIST_CONFIG_WORK	0x00001000	/* show objects with slow work */
-#define FSCACHE_OBJLIST_CONFIG_NOWORK	0x00002000	/* show objects without slow work */
+#define FSCACHE_OBJLIST_CONFIG_WORK	0x00001000	/* show objects with work */
+#define FSCACHE_OBJLIST_CONFIG_NOWORK	0x00002000	/* show objects without work */
 
 	u8		buf[512];	/* key and aux data buffer */
 };
@@ -231,12 +231,11 @@ static int fscache_objlist_show(struct seq_file *m, void *v)
 		       READS, NOREADS);
 		FILTER(obj->events & obj->event_mask,
 		       EVENTS, NOEVENTS);
-		FILTER(obj->work.flags & ~(1UL << SLOW_WORK_VERY_SLOW),
-		       WORK, NOWORK);
+		FILTER(work_busy(&obj->work), WORK, NOWORK);
 	}
 
 	seq_printf(m,
-		   "%8x %8x %s %5u %3u %3u %3u %2u %5u %2lx %2lx %1lx %1lx | ",
+		   "%8x %8x %s %5u %3u %3u %3u %2u %5u %2lx %2lx %1lx %1x | ",
 		   obj->debug_id,
 		   obj->parent ? obj->parent->debug_id : -1,
 		   fscache_object_states_short[obj->state],
@@ -249,7 +248,7 @@ static int fscache_objlist_show(struct seq_file *m, void *v)
 		   obj->event_mask & FSCACHE_OBJECT_EVENTS_MASK,
 		   obj->events,
 		   obj->flags,
-		   obj->work.flags);
+		   work_busy(&obj->work));
 
 	no_cookie = true;
 	keylen = auxlen = 0;
diff --git a/fs/fscache/object.c b/fs/fscache/object.c
index 0b589a9b4ff..b6b897c550a 100644
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -14,7 +14,6 @@
 
 #define FSCACHE_DEBUG_LEVEL COOKIE
 #include <linux/module.h>
-#include <linux/seq_file.h>
 #include "internal.h"
 
 const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = {
@@ -50,12 +49,8 @@ const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = {
 	[FSCACHE_OBJECT_DEAD]		= "DEAD",
 };
 
-static void fscache_object_slow_work_put_ref(struct slow_work *);
-static int  fscache_object_slow_work_get_ref(struct slow_work *);
-static void fscache_object_slow_work_execute(struct slow_work *);
-#ifdef CONFIG_SLOW_WORK_DEBUG
-static void fscache_object_slow_work_desc(struct slow_work *, struct seq_file *);
-#endif
+static int  fscache_get_object(struct fscache_object *);
+static void fscache_put_object(struct fscache_object *);
 static void fscache_initialise_object(struct fscache_object *);
 static void fscache_lookup_object(struct fscache_object *);
 static void fscache_object_available(struct fscache_object *);
@@ -64,17 +59,6 @@ static void fscache_withdraw_object(struct fscache_object *);
 static void fscache_enqueue_dependents(struct fscache_object *);
 static void fscache_dequeue_object(struct fscache_object *);
 
-const struct slow_work_ops fscache_object_slow_work_ops = {
-	.owner		= THIS_MODULE,
-	.get_ref	= fscache_object_slow_work_get_ref,
-	.put_ref	= fscache_object_slow_work_put_ref,
-	.execute	= fscache_object_slow_work_execute,
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	.desc		= fscache_object_slow_work_desc,
-#endif
-};
-EXPORT_SYMBOL(fscache_object_slow_work_ops);
-
 /*
  * we need to notify the parent when an op completes that we had outstanding
  * upon it
@@ -345,7 +329,7 @@ unsupported_event:
 /*
  * execute an object
  */
-static void fscache_object_slow_work_execute(struct slow_work *work)
+void fscache_object_work_func(struct work_struct *work)
 {
 	struct fscache_object *object =
 		container_of(work, struct fscache_object, work);
@@ -359,23 +343,9 @@ static void fscache_object_slow_work_execute(struct slow_work *work)
 	if (object->events & object->event_mask)
 		fscache_enqueue_object(object);
 	clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events);
+	fscache_put_object(object);
 }
-
-/*
- * describe an object for slow-work debugging
- */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-static void fscache_object_slow_work_desc(struct slow_work *work,
-					  struct seq_file *m)
-{
-	struct fscache_object *object =
-		container_of(work, struct fscache_object, work);
-
-	seq_printf(m, "FSC: OBJ%x: %s",
-		   object->debug_id,
-		   fscache_object_states_short[object->state]);
-}
-#endif
+EXPORT_SYMBOL(fscache_object_work_func);
 
 /*
  * initialise an object
@@ -393,7 +363,6 @@ static void fscache_initialise_object(struct fscache_object *object)
 	_enter("");
 	ASSERT(object->cookie != NULL);
 	ASSERT(object->cookie->parent != NULL);
-	ASSERT(list_empty(&object->work.link));
 
 	if (object->events & ((1 << FSCACHE_OBJECT_EV_ERROR) |
 			      (1 << FSCACHE_OBJECT_EV_RELEASE) |
@@ -671,10 +640,8 @@ static void fscache_drop_object(struct fscache_object *object)
 		object->parent = NULL;
 	}
 
-	/* this just shifts the object release to the slow work processor */
-	fscache_stat(&fscache_n_cop_put_object);
-	object->cache->ops->put_object(object);
-	fscache_stat_d(&fscache_n_cop_put_object);
+	/* this just shifts the object release to the work processor */
+	fscache_put_object(object);
 
 	_leave("");
 }
@@ -758,12 +725,10 @@ void fscache_withdrawing_object(struct fscache_cache *cache,
 }
 
 /*
- * allow the slow work item processor to get a ref on an object
+ * get a ref on an object
  */
-static int fscache_object_slow_work_get_ref(struct slow_work *work)
+static int fscache_get_object(struct fscache_object *object)
 {
-	struct fscache_object *object =
-		container_of(work, struct fscache_object, work);
 	int ret;
 
 	fscache_stat(&fscache_n_cop_grab_object);
@@ -773,13 +738,10 @@ static int fscache_object_slow_work_get_ref(struct slow_work *work)
 }
 
 /*
- * allow the slow work item processor to discard a ref on a work item
+ * discard a ref on a work item
  */
-static void fscache_object_slow_work_put_ref(struct slow_work *work)
+static void fscache_put_object(struct fscache_object *object)
 {
-	struct fscache_object *object =
-		container_of(work, struct fscache_object, work);
-
 	fscache_stat(&fscache_n_cop_put_object);
 	object->cache->ops->put_object(object);
 	fscache_stat_d(&fscache_n_cop_put_object);
@@ -792,8 +754,48 @@ void fscache_enqueue_object(struct fscache_object *object)
 {
 	_enter("{OBJ%x}", object->debug_id);
 
-	slow_work_enqueue(&object->work);
+	if (fscache_get_object(object) >= 0) {
+		wait_queue_head_t *cong_wq =
+			&get_cpu_var(fscache_object_cong_wait);
+
+		if (queue_work(fscache_object_wq, &object->work)) {
+			if (fscache_object_congested())
+				wake_up(cong_wq);
+		} else
+			fscache_put_object(object);
+
+		put_cpu_var(fscache_object_cong_wait);
+	}
+}
+
+/**
+ * fscache_object_sleep_till_congested - Sleep until object wq is congested
+ * @timoutp: Scheduler sleep timeout
+ *
+ * Allow an object handler to sleep until the object workqueue is congested.
+ *
+ * The caller must set up a wake up event before calling this and must have set
+ * the appropriate sleep mode (such as TASK_UNINTERRUPTIBLE) and tested its own
+ * condition before calling this function as no test is made here.
+ *
+ * %true is returned if the object wq is congested, %false otherwise.
+ */
+bool fscache_object_sleep_till_congested(signed long *timeoutp)
+{
+	wait_queue_head_t *cong_wq = &__get_cpu_var(fscache_object_cong_wait);
+	DEFINE_WAIT(wait);
+
+	if (fscache_object_congested())
+		return true;
+
+	add_wait_queue_exclusive(cong_wq, &wait);
+	if (!fscache_object_congested())
+		*timeoutp = schedule_timeout(*timeoutp);
+	finish_wait(cong_wq, &wait);
+
+	return fscache_object_congested();
 }
+EXPORT_SYMBOL_GPL(fscache_object_sleep_till_congested);
 
 /*
  * enqueue the dependents of an object for metadata-type processing
@@ -819,9 +821,7 @@ static void fscache_enqueue_dependents(struct fscache_object *object)
 
 		/* sort onto appropriate lists */
 		fscache_enqueue_object(dep);
-		fscache_stat(&fscache_n_cop_put_object);
-		dep->cache->ops->put_object(dep);
-		fscache_stat_d(&fscache_n_cop_put_object);
+		fscache_put_object(dep);
 
 		if (!list_empty(&object->dependents))
 			cond_resched_lock(&object->lock);
diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c
index f17cecafae4..b9f34eaede0 100644
--- a/fs/fscache/operation.c
+++ b/fs/fscache/operation.c
@@ -42,16 +42,12 @@ void fscache_enqueue_operation(struct fscache_operation *op)
 
 	fscache_stat(&fscache_n_op_enqueue);
 	switch (op->flags & FSCACHE_OP_TYPE) {
-	case FSCACHE_OP_FAST:
-		_debug("queue fast");
+	case FSCACHE_OP_ASYNC:
+		_debug("queue async");
 		atomic_inc(&op->usage);
-		if (!schedule_work(&op->fast_work))
+		if (!queue_work(fscache_op_wq, &op->work))
 			fscache_put_operation(op);
 		break;
-	case FSCACHE_OP_SLOW:
-		_debug("queue slow");
-		slow_work_enqueue(&op->slow_work);
-		break;
 	case FSCACHE_OP_MYTHREAD:
 		_debug("queue for caller's attention");
 		break;
@@ -455,36 +451,13 @@ void fscache_operation_gc(struct work_struct *work)
 }
 
 /*
- * allow the slow work item processor to get a ref on an operation
- */
-static int fscache_op_get_ref(struct slow_work *work)
-{
-	struct fscache_operation *op =
-		container_of(work, struct fscache_operation, slow_work);
-
-	atomic_inc(&op->usage);
-	return 0;
-}
-
-/*
- * allow the slow work item processor to discard a ref on an operation
- */
-static void fscache_op_put_ref(struct slow_work *work)
-{
-	struct fscache_operation *op =
-		container_of(work, struct fscache_operation, slow_work);
-
-	fscache_put_operation(op);
-}
-
-/*
- * execute an operation using the slow thread pool to provide processing context
- * - the caller holds a ref to this object, so we don't need to hold one
+ * execute an operation using fs_op_wq to provide processing context -
+ * the caller holds a ref to this object, so we don't need to hold one
  */
-static void fscache_op_execute(struct slow_work *work)
+void fscache_op_work_func(struct work_struct *work)
 {
 	struct fscache_operation *op =
-		container_of(work, struct fscache_operation, slow_work);
+		container_of(work, struct fscache_operation, work);
 	unsigned long start;
 
 	_enter("{OBJ%x OP%x,%d}",
@@ -494,31 +467,7 @@ static void fscache_op_execute(struct slow_work *work)
 	start = jiffies;
 	op->processor(op);
 	fscache_hist(fscache_ops_histogram, start);
+	fscache_put_operation(op);
 
 	_leave("");
 }
-
-/*
- * describe an operation for slow-work debugging
- */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-static void fscache_op_desc(struct slow_work *work, struct seq_file *m)
-{
-	struct fscache_operation *op =
-		container_of(work, struct fscache_operation, slow_work);
-
-	seq_printf(m, "FSC: OBJ%x OP%x: %s/%s fl=%lx",
-		   op->object->debug_id, op->debug_id,
-		   op->name, op->state, op->flags);
-}
-#endif
-
-const struct slow_work_ops fscache_op_slow_work_ops = {
-	.owner		= THIS_MODULE,
-	.get_ref	= fscache_op_get_ref,
-	.put_ref	= fscache_op_put_ref,
-	.execute	= fscache_op_execute,
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	.desc		= fscache_op_desc,
-#endif
-};
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index 723b889fd21..41c441c2058 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -105,7 +105,7 @@ bool __fscache_maybe_release_page(struct fscache_cookie *cookie,
 
 page_busy:
 	/* we might want to wait here, but that could deadlock the allocator as
-	 * the slow-work threads writing to the cache may all end up sleeping
+	 * the work threads writing to the cache may all end up sleeping
 	 * on memory allocation */
 	fscache_stat(&fscache_n_store_vmscan_busy);
 	return false;
@@ -188,9 +188,8 @@ int __fscache_attr_changed(struct fscache_cookie *cookie)
 		return -ENOMEM;
 	}
 
-	fscache_operation_init(op, NULL);
-	fscache_operation_init_slow(op, fscache_attr_changed_op);
-	op->flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_EXCLUSIVE);
+	fscache_operation_init(op, fscache_attr_changed_op, NULL);
+	op->flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_EXCLUSIVE);
 	fscache_set_op_name(op, "Attr");
 
 	spin_lock(&cookie->lock);
@@ -218,24 +217,6 @@ nobufs:
 EXPORT_SYMBOL(__fscache_attr_changed);
 
 /*
- * handle secondary execution given to a retrieval op on behalf of the
- * cache
- */
-static void fscache_retrieval_work(struct work_struct *work)
-{
-	struct fscache_retrieval *op =
-		container_of(work, struct fscache_retrieval, op.fast_work);
-	unsigned long start;
-
-	_enter("{OP%x}", op->op.debug_id);
-
-	start = jiffies;
-	op->op.processor(&op->op);
-	fscache_hist(fscache_ops_histogram, start);
-	fscache_put_operation(&op->op);
-}
-
-/*
  * release a retrieval op reference
  */
 static void fscache_release_retrieval_op(struct fscache_operation *_op)
@@ -269,13 +250,12 @@ static struct fscache_retrieval *fscache_alloc_retrieval(
 		return NULL;
 	}
 
-	fscache_operation_init(&op->op, fscache_release_retrieval_op);
+	fscache_operation_init(&op->op, NULL, fscache_release_retrieval_op);
 	op->op.flags	= FSCACHE_OP_MYTHREAD | (1 << FSCACHE_OP_WAITING);
 	op->mapping	= mapping;
 	op->end_io_func	= end_io_func;
 	op->context	= context;
 	op->start_time	= jiffies;
-	INIT_WORK(&op->op.fast_work, fscache_retrieval_work);
 	INIT_LIST_HEAD(&op->to_do);
 	fscache_set_op_name(&op->op, "Retr");
 	return op;
@@ -795,9 +775,9 @@ int __fscache_write_page(struct fscache_cookie *cookie,
 	if (!op)
 		goto nomem;
 
-	fscache_operation_init(&op->op, fscache_release_write_op);
-	fscache_operation_init_slow(&op->op, fscache_write_op);
-	op->op.flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_WAITING);
+	fscache_operation_init(&op->op, fscache_write_op,
+			       fscache_release_write_op);
+	op->op.flags = FSCACHE_OP_ASYNC | (1 << FSCACHE_OP_WAITING);
 	fscache_set_op_name(&op->op, "Write1");
 
 	ret = radix_tree_preload(gfp & ~__GFP_HIGHMEM);
@@ -852,7 +832,7 @@ int __fscache_write_page(struct fscache_cookie *cookie,
 	fscache_stat(&fscache_n_store_ops);
 	fscache_stat(&fscache_n_stores_ok);
 
-	/* the slow work queue now carries its own ref on the object */
+	/* the work queue now carries its own ref on the object */
 	fscache_put_operation(&op->op);
 	_leave(" = 0");
 	return 0;
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 9424796d663..69ad053ffd7 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -239,7 +239,6 @@ static u64 fuse_get_unique(struct fuse_conn *fc)
 
 static void queue_request(struct fuse_conn *fc, struct fuse_req *req)
 {
-	req->in.h.unique = fuse_get_unique(fc);
 	req->in.h.len = sizeof(struct fuse_in_header) +
 		len_args(req->in.numargs, (struct fuse_arg *) req->in.args);
 	list_add_tail(&req->list, &fc->pending);
@@ -261,6 +260,7 @@ static void flush_bg_queue(struct fuse_conn *fc)
 		req = list_entry(fc->bg_queue.next, struct fuse_req, list);
 		list_del(&req->list);
 		fc->active_background++;
+		req->in.h.unique = fuse_get_unique(fc);
 		queue_request(fc, req);
 	}
 }
@@ -398,6 +398,7 @@ void fuse_request_send(struct fuse_conn *fc, struct fuse_req *req)
 	else if (fc->conn_error)
 		req->out.h.error = -ECONNREFUSED;
 	else {
+		req->in.h.unique = fuse_get_unique(fc);
 		queue_request(fc, req);
 		/* acquire extra reference, since request is still needed
 		   after request_end() */
@@ -450,6 +451,23 @@ void fuse_request_send_background(struct fuse_conn *fc, struct fuse_req *req)
 }
 EXPORT_SYMBOL_GPL(fuse_request_send_background);
 
+static int fuse_request_send_notify_reply(struct fuse_conn *fc,
+					  struct fuse_req *req, u64 unique)
+{
+	int err = -ENODEV;
+
+	req->isreply = 0;
+	req->in.h.unique = unique;
+	spin_lock(&fc->lock);
+	if (fc->connected) {
+		queue_request(fc, req);
+		err = 0;
+	}
+	spin_unlock(&fc->lock);
+
+	return err;
+}
+
 /*
  * Called under fc->lock
  *
@@ -535,13 +553,13 @@ static void fuse_copy_finish(struct fuse_copy_state *cs)
 		if (!cs->write) {
 			buf->ops->unmap(cs->pipe, buf, cs->mapaddr);
 		} else {
-			kunmap_atomic(cs->mapaddr, KM_USER0);
+			kunmap(buf->page);
 			buf->len = PAGE_SIZE - cs->len;
 		}
 		cs->currbuf = NULL;
 		cs->mapaddr = NULL;
 	} else if (cs->mapaddr) {
-		kunmap_atomic(cs->mapaddr, KM_USER0);
+		kunmap(cs->pg);
 		if (cs->write) {
 			flush_dcache_page(cs->pg);
 			set_page_dirty_lock(cs->pg);
@@ -572,7 +590,7 @@ static int fuse_copy_fill(struct fuse_copy_state *cs)
 
 			BUG_ON(!cs->nr_segs);
 			cs->currbuf = buf;
-			cs->mapaddr = buf->ops->map(cs->pipe, buf, 1);
+			cs->mapaddr = buf->ops->map(cs->pipe, buf, 0);
 			cs->len = buf->len;
 			cs->buf = cs->mapaddr + buf->offset;
 			cs->pipebufs++;
@@ -592,7 +610,7 @@ static int fuse_copy_fill(struct fuse_copy_state *cs)
 			buf->len = 0;
 
 			cs->currbuf = buf;
-			cs->mapaddr = kmap_atomic(page, KM_USER0);
+			cs->mapaddr = kmap(page);
 			cs->buf = cs->mapaddr;
 			cs->len = PAGE_SIZE;
 			cs->pipebufs++;
@@ -611,7 +629,7 @@ static int fuse_copy_fill(struct fuse_copy_state *cs)
 			return err;
 		BUG_ON(err != 1);
 		offset = cs->addr % PAGE_SIZE;
-		cs->mapaddr = kmap_atomic(cs->pg, KM_USER0);
+		cs->mapaddr = kmap(cs->pg);
 		cs->buf = cs->mapaddr + offset;
 		cs->len = min(PAGE_SIZE - offset, cs->seglen);
 		cs->seglen -= cs->len;
@@ -1231,6 +1249,199 @@ err:
 	return err;
 }
 
+static int fuse_notify_store(struct fuse_conn *fc, unsigned int size,
+			     struct fuse_copy_state *cs)
+{
+	struct fuse_notify_store_out outarg;
+	struct inode *inode;
+	struct address_space *mapping;
+	u64 nodeid;
+	int err;
+	pgoff_t index;
+	unsigned int offset;
+	unsigned int num;
+	loff_t file_size;
+	loff_t end;
+
+	err = -EINVAL;
+	if (size < sizeof(outarg))
+		goto out_finish;
+
+	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+	if (err)
+		goto out_finish;
+
+	err = -EINVAL;
+	if (size - sizeof(outarg) != outarg.size)
+		goto out_finish;
+
+	nodeid = outarg.nodeid;
+
+	down_read(&fc->killsb);
+
+	err = -ENOENT;
+	if (!fc->sb)
+		goto out_up_killsb;
+
+	inode = ilookup5(fc->sb, nodeid, fuse_inode_eq, &nodeid);
+	if (!inode)
+		goto out_up_killsb;
+
+	mapping = inode->i_mapping;
+	index = outarg.offset >> PAGE_CACHE_SHIFT;
+	offset = outarg.offset & ~PAGE_CACHE_MASK;
+	file_size = i_size_read(inode);
+	end = outarg.offset + outarg.size;
+	if (end > file_size) {
+		file_size = end;
+		fuse_write_update_size(inode, file_size);
+	}
+
+	num = outarg.size;
+	while (num) {
+		struct page *page;
+		unsigned int this_num;
+
+		err = -ENOMEM;
+		page = find_or_create_page(mapping, index,
+					   mapping_gfp_mask(mapping));
+		if (!page)
+			goto out_iput;
+
+		this_num = min_t(unsigned, num, PAGE_CACHE_SIZE - offset);
+		err = fuse_copy_page(cs, &page, offset, this_num, 0);
+		if (!err && offset == 0 && (num != 0 || file_size == end))
+			SetPageUptodate(page);
+		unlock_page(page);
+		page_cache_release(page);
+
+		if (err)
+			goto out_iput;
+
+		num -= this_num;
+		offset = 0;
+		index++;
+	}
+
+	err = 0;
+
+out_iput:
+	iput(inode);
+out_up_killsb:
+	up_read(&fc->killsb);
+out_finish:
+	fuse_copy_finish(cs);
+	return err;
+}
+
+static void fuse_retrieve_end(struct fuse_conn *fc, struct fuse_req *req)
+{
+	int i;
+
+	for (i = 0; i < req->num_pages; i++) {
+		struct page *page = req->pages[i];
+		page_cache_release(page);
+	}
+}
+
+static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode,
+			 struct fuse_notify_retrieve_out *outarg)
+{
+	int err;
+	struct address_space *mapping = inode->i_mapping;
+	struct fuse_req *req;
+	pgoff_t index;
+	loff_t file_size;
+	unsigned int num;
+	unsigned int offset;
+	size_t total_len;
+
+	req = fuse_get_req(fc);
+	if (IS_ERR(req))
+		return PTR_ERR(req);
+
+	offset = outarg->offset & ~PAGE_CACHE_MASK;
+
+	req->in.h.opcode = FUSE_NOTIFY_REPLY;
+	req->in.h.nodeid = outarg->nodeid;
+	req->in.numargs = 2;
+	req->in.argpages = 1;
+	req->page_offset = offset;
+	req->end = fuse_retrieve_end;
+
+	index = outarg->offset >> PAGE_CACHE_SHIFT;
+	file_size = i_size_read(inode);
+	num = outarg->size;
+	if (outarg->offset > file_size)
+		num = 0;
+	else if (outarg->offset + num > file_size)
+		num = file_size - outarg->offset;
+
+	while (num) {
+		struct page *page;
+		unsigned int this_num;
+
+		page = find_get_page(mapping, index);
+		if (!page)
+			break;
+
+		this_num = min_t(unsigned, num, PAGE_CACHE_SIZE - offset);
+		req->pages[req->num_pages] = page;
+		req->num_pages++;
+
+		num -= this_num;
+		total_len += this_num;
+	}
+	req->misc.retrieve_in.offset = outarg->offset;
+	req->misc.retrieve_in.size = total_len;
+	req->in.args[0].size = sizeof(req->misc.retrieve_in);
+	req->in.args[0].value = &req->misc.retrieve_in;
+	req->in.args[1].size = total_len;
+
+	err = fuse_request_send_notify_reply(fc, req, outarg->notify_unique);
+	if (err)
+		fuse_retrieve_end(fc, req);
+
+	return err;
+}
+
+static int fuse_notify_retrieve(struct fuse_conn *fc, unsigned int size,
+				struct fuse_copy_state *cs)
+{
+	struct fuse_notify_retrieve_out outarg;
+	struct inode *inode;
+	int err;
+
+	err = -EINVAL;
+	if (size != sizeof(outarg))
+		goto copy_finish;
+
+	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
+	if (err)
+		goto copy_finish;
+
+	fuse_copy_finish(cs);
+
+	down_read(&fc->killsb);
+	err = -ENOENT;
+	if (fc->sb) {
+		u64 nodeid = outarg.nodeid;
+
+		inode = ilookup5(fc->sb, nodeid, fuse_inode_eq, &nodeid);
+		if (inode) {
+			err = fuse_retrieve(fc, inode, &outarg);
+			iput(inode);
+		}
+	}
+	up_read(&fc->killsb);
+
+	return err;
+
+copy_finish:
+	fuse_copy_finish(cs);
+	return err;
+}
+
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 		       unsigned int size, struct fuse_copy_state *cs)
 {
@@ -1244,6 +1455,12 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 	case FUSE_NOTIFY_INVAL_ENTRY:
 		return fuse_notify_inval_entry(fc, size, cs);
 
+	case FUSE_NOTIFY_STORE:
+		return fuse_notify_store(fc, size, cs);
+
+	case FUSE_NOTIFY_RETRIEVE:
+		return fuse_notify_retrieve(fc, size, cs);
+
 	default:
 		fuse_copy_finish(cs);
 		return -EINVAL;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index ada0adeb3bb..147c1f71bdb 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -706,7 +706,7 @@ static int fuse_write_begin(struct file *file, struct address_space *mapping,
 	return 0;
 }
 
-static void fuse_write_update_size(struct inode *inode, loff_t pos)
+void fuse_write_update_size(struct inode *inode, loff_t pos)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_inode *fi = get_fuse_inode(inode);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 8f309f04064..57d4a3a0f10 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -272,6 +272,7 @@ struct fuse_req {
 			struct fuse_write_in in;
 			struct fuse_write_out out;
 		} write;
+		struct fuse_notify_retrieve_in retrieve_in;
 		struct fuse_lk_in lk_in;
 	} misc;
 
@@ -748,4 +749,6 @@ long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
 unsigned fuse_file_poll(struct file *file, poll_table *wait);
 int fuse_dev_release(struct inode *inode, struct file *file);
 
+void fuse_write_update_size(struct inode *inode, loff_t pos);
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index a47b4310711..cc966552214 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -7,7 +7,6 @@ config GFS2_FS
 	select IP_SCTP if DLM_SCTP
 	select FS_POSIX_ACL
 	select CRC32
-	select SLOW_WORK
 	select QUOTACTL
 	help
 	  A cluster filesystem.
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 8fcbce48a12..fdbf4b366fa 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -12,7 +12,6 @@
 
 #include <linux/fs.h>
 #include <linux/workqueue.h>
-#include <linux/slow-work.h>
 #include <linux/dlm.h>
 #include <linux/buffer_head.h>
 
@@ -383,7 +382,7 @@ struct gfs2_journal_extent {
 struct gfs2_jdesc {
 	struct list_head jd_list;
 	struct list_head extent_list;
-	struct slow_work jd_work;
+	struct work_struct jd_work;
 	struct inode *jd_inode;
 	unsigned long jd_flags;
 #define JDF_RECOVERY 1
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index fb2a5f93b7c..b1e9630eb46 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/gfs2_ondisk.h>
 #include <asm/atomic.h>
-#include <linux/slow-work.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -24,6 +23,7 @@
 #include "util.h"
 #include "glock.h"
 #include "quota.h"
+#include "recovery.h"
 
 static struct shrinker qd_shrinker = {
 	.shrink = gfs2_shrink_qd_memory,
@@ -138,9 +138,11 @@ static int __init init_gfs2_fs(void)
 	if (error)
 		goto fail_unregister;
 
-	error = slow_work_register_user(THIS_MODULE);
-	if (error)
-		goto fail_slow;
+	error = -ENOMEM;
+	gfs_recovery_wq = alloc_workqueue("gfs_recovery",
+					  WQ_NON_REENTRANT | WQ_RESCUER, 0);
+	if (!gfs_recovery_wq)
+		goto fail_wq;
 
 	gfs2_register_debugfs();
 
@@ -148,7 +150,7 @@ static int __init init_gfs2_fs(void)
 
 	return 0;
 
-fail_slow:
+fail_wq:
 	unregister_filesystem(&gfs2meta_fs_type);
 fail_unregister:
 	unregister_filesystem(&gfs2_fs_type);
@@ -190,7 +192,7 @@ static void __exit exit_gfs2_fs(void)
 	gfs2_unregister_debugfs();
 	unregister_filesystem(&gfs2_fs_type);
 	unregister_filesystem(&gfs2meta_fs_type);
-	slow_work_unregister_user(THIS_MODULE);
+	destroy_workqueue(gfs_recovery_wq);
 
 	kmem_cache_destroy(gfs2_quotad_cachep);
 	kmem_cache_destroy(gfs2_rgrpd_cachep);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 45a4a36195d..4f44bdeb2f0 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -17,7 +17,6 @@
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/gfs2_ondisk.h>
-#include <linux/slow-work.h>
 #include <linux/quotaops.h>
 
 #include "gfs2.h"
@@ -673,7 +672,7 @@ static int gfs2_jindex_hold(struct gfs2_sbd *sdp, struct gfs2_holder *ji_gh)
 			break;
 
 		INIT_LIST_HEAD(&jd->extent_list);
-		slow_work_init(&jd->jd_work, &gfs2_recover_ops);
+		INIT_WORK(&jd->jd_work, gfs2_recover_func);
 		jd->jd_inode = gfs2_lookupi(sdp->sd_jindex, &name, 1);
 		if (!jd->jd_inode || IS_ERR(jd->jd_inode)) {
 			if (!jd->jd_inode)
@@ -782,7 +781,8 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 	if (sdp->sd_lockstruct.ls_first) {
 		unsigned int x;
 		for (x = 0; x < sdp->sd_journals; x++) {
-			error = gfs2_recover_journal(gfs2_jdesc_find(sdp, x));
+			error = gfs2_recover_journal(gfs2_jdesc_find(sdp, x),
+						     true);
 			if (error) {
 				fs_err(sdp, "error recovering journal %u: %d\n",
 				       x, error);
@@ -792,7 +792,7 @@ static int init_journal(struct gfs2_sbd *sdp, int undo)
 
 		gfs2_others_may_mount(sdp);
 	} else if (!sdp->sd_args.ar_spectator) {
-		error = gfs2_recover_journal(sdp->sd_jdesc);
+		error = gfs2_recover_journal(sdp->sd_jdesc, true);
 		if (error) {
 			fs_err(sdp, "error recovering my journal: %d\n", error);
 			goto fail_jinode_gh;
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 8bb643cb265..1bc6b5695e6 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -1449,10 +1449,10 @@ static int gfs2_quota_get_xstate(struct super_block *sb,
 
 	switch (sdp->sd_args.ar_quota) {
 	case GFS2_QUOTA_ON:
-		fqs->qs_flags |= (XFS_QUOTA_UDQ_ENFD | XFS_QUOTA_GDQ_ENFD);
+		fqs->qs_flags |= (FS_QUOTA_UDQ_ENFD | FS_QUOTA_GDQ_ENFD);
 		/*FALLTHRU*/
 	case GFS2_QUOTA_ACCOUNT:
-		fqs->qs_flags |= (XFS_QUOTA_UDQ_ACCT | XFS_QUOTA_GDQ_ACCT);
+		fqs->qs_flags |= (FS_QUOTA_UDQ_ACCT | FS_QUOTA_GDQ_ACCT);
 		break;
 	case GFS2_QUOTA_OFF:
 		break;
@@ -1498,7 +1498,7 @@ static int gfs2_get_dqblk(struct super_block *sb, int type, qid_t id,
 
 	qlvb = (struct gfs2_quota_lvb *)qd->qd_gl->gl_lvb;
 	fdq->d_version = FS_DQUOT_VERSION;
-	fdq->d_flags = (type == QUOTA_USER) ? XFS_USER_QUOTA : XFS_GROUP_QUOTA;
+	fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA;
 	fdq->d_id = id;
 	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
 	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
@@ -1533,12 +1533,12 @@ static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id,
 	switch(type) {
 	case USRQUOTA:
 		type = QUOTA_USER;
-		if (fdq->d_flags != XFS_USER_QUOTA)
+		if (fdq->d_flags != FS_USER_QUOTA)
 			return -EINVAL;
 		break;
 	case GRPQUOTA:
 		type = QUOTA_GROUP;
-		if (fdq->d_flags != XFS_GROUP_QUOTA)
+		if (fdq->d_flags != FS_GROUP_QUOTA)
 			return -EINVAL;
 		break;
 	default:
diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c
index 4b9bece3d43..f7f89a94a5a 100644
--- a/fs/gfs2/recovery.c
+++ b/fs/gfs2/recovery.c
@@ -14,7 +14,6 @@
 #include <linux/buffer_head.h>
 #include <linux/gfs2_ondisk.h>
 #include <linux/crc32.h>
-#include <linux/slow-work.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -28,6 +27,8 @@
 #include "util.h"
 #include "dir.h"
 
+struct workqueue_struct *gfs_recovery_wq;
+
 int gfs2_replay_read_block(struct gfs2_jdesc *jd, unsigned int blk,
 			   struct buffer_head **bh)
 {
@@ -443,23 +444,7 @@ static void gfs2_recovery_done(struct gfs2_sbd *sdp, unsigned int jid,
         kobject_uevent_env(&sdp->sd_kobj, KOBJ_CHANGE, envp);
 }
 
-static int gfs2_recover_get_ref(struct slow_work *work)
-{
-	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
-	if (test_and_set_bit(JDF_RECOVERY, &jd->jd_flags))
-		return -EBUSY;
-	return 0;
-}
-
-static void gfs2_recover_put_ref(struct slow_work *work)
-{
-	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
-	clear_bit(JDF_RECOVERY, &jd->jd_flags);
-	smp_mb__after_clear_bit();
-	wake_up_bit(&jd->jd_flags, JDF_RECOVERY);
-}
-
-static void gfs2_recover_work(struct slow_work *work)
+void gfs2_recover_func(struct work_struct *work)
 {
 	struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
 	struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
@@ -578,7 +563,7 @@ static void gfs2_recover_work(struct slow_work *work)
 		gfs2_glock_dq_uninit(&j_gh);
 
 	fs_info(sdp, "jid=%u: Done\n", jd->jd_jid);
-	return;
+	goto done;
 
 fail_gunlock_tr:
 	gfs2_glock_dq_uninit(&t_gh);
@@ -590,32 +575,35 @@ fail_gunlock_j:
 	}
 
 	fs_info(sdp, "jid=%u: %s\n", jd->jd_jid, (error) ? "Failed" : "Done");
-
 fail:
 	gfs2_recovery_done(sdp, jd->jd_jid, LM_RD_GAVEUP);
+done:
+	clear_bit(JDF_RECOVERY, &jd->jd_flags);
+	smp_mb__after_clear_bit();
+	wake_up_bit(&jd->jd_flags, JDF_RECOVERY);
 }
 
-struct slow_work_ops gfs2_recover_ops = {
-	.owner	 = THIS_MODULE,
-	.get_ref = gfs2_recover_get_ref,
-	.put_ref = gfs2_recover_put_ref,
-	.execute = gfs2_recover_work,
-};
-
-
 static int gfs2_recovery_wait(void *word)
 {
 	schedule();
 	return 0;
 }
 
-int gfs2_recover_journal(struct gfs2_jdesc *jd)
+int gfs2_recover_journal(struct gfs2_jdesc *jd, bool wait)
 {
 	int rv;
-	rv = slow_work_enqueue(&jd->jd_work);
-	if (rv)
-		return rv;
-	wait_on_bit(&jd->jd_flags, JDF_RECOVERY, gfs2_recovery_wait, TASK_UNINTERRUPTIBLE);
+
+	if (test_and_set_bit(JDF_RECOVERY, &jd->jd_flags))
+		return -EBUSY;
+
+	/* we have JDF_RECOVERY, queue should always succeed */
+	rv = queue_work(gfs_recovery_wq, &jd->jd_work);
+	BUG_ON(!rv);
+
+	if (wait)
+		wait_on_bit(&jd->jd_flags, JDF_RECOVERY, gfs2_recovery_wait,
+			    TASK_UNINTERRUPTIBLE);
+
 	return 0;
 }
 
diff --git a/fs/gfs2/recovery.h b/fs/gfs2/recovery.h
index 1616ac22569..2226136c764 100644
--- a/fs/gfs2/recovery.h
+++ b/fs/gfs2/recovery.h
@@ -12,6 +12,8 @@
 
 #include "incore.h"
 
+extern struct workqueue_struct *gfs_recovery_wq;
+
 static inline void gfs2_replay_incr_blk(struct gfs2_sbd *sdp, unsigned int *blk)
 {
 	if (++*blk == sdp->sd_jdesc->jd_blocks)
@@ -27,8 +29,8 @@ extern void gfs2_revoke_clean(struct gfs2_sbd *sdp);
 
 extern int gfs2_find_jhead(struct gfs2_jdesc *jd,
 		    struct gfs2_log_header_host *head);
-extern int gfs2_recover_journal(struct gfs2_jdesc *gfs2_jd);
-extern struct slow_work_ops gfs2_recover_ops;
+extern int gfs2_recover_journal(struct gfs2_jdesc *gfs2_jd, bool wait);
+extern void gfs2_recover_func(struct work_struct *work);
 
 #endif /* __RECOVERY_DOT_H__ */
 
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index d019d0d55e0..ccacffd2faa 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -25,6 +25,7 @@
 #include "quota.h"
 #include "util.h"
 #include "glops.h"
+#include "recovery.h"
 
 struct gfs2_attr {
 	struct attribute attr;
@@ -376,7 +377,7 @@ static ssize_t recover_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
 	list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) {
 		if (jd->jd_jid != jid)
 			continue;
-		rv = slow_work_enqueue(&jd->jd_work);
+		rv = gfs2_recover_journal(jd, false);
 		break;
 	}
 out:
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 93d1e47647b..f19ce94693d 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1281,13 +1281,9 @@ int journal_check_used_features (journal_t *journal, unsigned long compat,
 int journal_check_available_features (journal_t *journal, unsigned long compat,
 				      unsigned long ro, unsigned long incompat)
 {
-	journal_superblock_t *sb;
-
 	if (!compat && !ro && !incompat)
 		return 1;
 
-	sb = journal->j_superblock;
-
 	/* We can support any known requested features iff the
 	 * superblock is in version 2.  Otherwise we fail to support any
 	 * extended sb features. */
@@ -1481,7 +1477,6 @@ int journal_flush(journal_t *journal)
 
 int journal_wipe(journal_t *journal, int write)
 {
-	journal_superblock_t *sb;
 	int err = 0;
 
 	J_ASSERT (!(journal->j_flags & JFS_LOADED));
@@ -1490,8 +1485,6 @@ int journal_wipe(journal_t *journal, int write)
 	if (err)
 		return err;
 
-	sb = journal->j_superblock;
-
 	if (!journal->j_tail)
 		goto no_recovery;
 
diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c
index 54c9bc9e1b1..81051dafebf 100644
--- a/fs/jbd/recovery.c
+++ b/fs/jbd/recovery.c
@@ -283,12 +283,9 @@ int journal_recover(journal_t *journal)
 int journal_skip_recovery(journal_t *journal)
 {
 	int			err;
-	journal_superblock_t *	sb;
-
 	struct recovery_info	info;
 
 	memset (&info, 0, sizeof(info));
-	sb = journal->j_superblock;
 
 	err = do_one_pass(journal, &info, PASS_SCAN);
 
@@ -297,7 +294,8 @@ int journal_skip_recovery(journal_t *journal)
 		++journal->j_transaction_sequence;
 	} else {
 #ifdef CONFIG_JBD_DEBUG
-		int dropped = info.end_transaction - be32_to_cpu(sb->s_sequence);
+		int dropped = info.end_transaction -
+			      be32_to_cpu(journal->j_superblock->s_sequence);
 #endif
 		jbd_debug(1,
 			  "JBD: ignoring %d transaction%s from the journal.\n",
@@ -321,11 +319,6 @@ static int do_one_pass(journal_t *journal,
 	unsigned int		sequence;
 	int			blocktype;
 
-	/* Precompute the maximum metadata descriptors in a descriptor block */
-	int			MAX_BLOCKS_PER_DESC;
-	MAX_BLOCKS_PER_DESC = ((journal->j_blocksize-sizeof(journal_header_t))
-			       / sizeof(journal_block_tag_t));
-
 	/*
 	 * First thing is to establish what we expect to find in the log
 	 * (in terms of transaction IDs), and where (in terms of log
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 076d1cc44f9..1c23a0f4e8a 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -118,13 +118,13 @@ static int __try_to_free_cp_buf(struct journal_head *jh)
 void __jbd2_log_wait_for_space(journal_t *journal)
 {
 	int nblocks, space_left;
-	assert_spin_locked(&journal->j_state_lock);
+	/* assert_spin_locked(&journal->j_state_lock); */
 
 	nblocks = jbd_space_needed(journal);
 	while (__jbd2_log_space_left(journal) < nblocks) {
 		if (journal->j_flags & JBD2_ABORT)
 			return;
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		mutex_lock(&journal->j_checkpoint_mutex);
 
 		/*
@@ -138,7 +138,7 @@ void __jbd2_log_wait_for_space(journal_t *journal)
 		 * filesystem, so abort the journal and leave a stack
 		 * trace for forensic evidence.
 		 */
-		spin_lock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
 		spin_lock(&journal->j_list_lock);
 		nblocks = jbd_space_needed(journal);
 		space_left = __jbd2_log_space_left(journal);
@@ -149,7 +149,7 @@ void __jbd2_log_wait_for_space(journal_t *journal)
 			if (journal->j_committing_transaction)
 				tid = journal->j_committing_transaction->t_tid;
 			spin_unlock(&journal->j_list_lock);
-			spin_unlock(&journal->j_state_lock);
+			write_unlock(&journal->j_state_lock);
 			if (chkpt) {
 				jbd2_log_do_checkpoint(journal);
 			} else if (jbd2_cleanup_journal_tail(journal) == 0) {
@@ -167,7 +167,7 @@ void __jbd2_log_wait_for_space(journal_t *journal)
 				WARN_ON(1);
 				jbd2_journal_abort(journal, 0);
 			}
-			spin_lock(&journal->j_state_lock);
+			write_lock(&journal->j_state_lock);
 		} else {
 			spin_unlock(&journal->j_list_lock);
 		}
@@ -474,7 +474,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
 	 * next transaction ID we will write, and where it will
 	 * start. */
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	spin_lock(&journal->j_list_lock);
 	transaction = journal->j_checkpoint_transactions;
 	if (transaction) {
@@ -496,7 +496,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
 	/* If the oldest pinned transaction is at the tail of the log
            already then there's not much we can do right now. */
 	if (journal->j_tail_sequence == first_tid) {
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		return 1;
 	}
 
@@ -516,7 +516,7 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
 	journal->j_free += freed;
 	journal->j_tail_sequence = first_tid;
 	journal->j_tail = blocknr;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 
 	/*
 	 * If there is an external journal, we need to make sure that
@@ -775,7 +775,7 @@ void __jbd2_journal_drop_transaction(journal_t *journal, transaction_t *transact
 	J_ASSERT(transaction->t_log_list == NULL);
 	J_ASSERT(transaction->t_checkpoint_list == NULL);
 	J_ASSERT(transaction->t_checkpoint_io_list == NULL);
-	J_ASSERT(transaction->t_updates == 0);
+	J_ASSERT(atomic_read(&transaction->t_updates) == 0);
 	J_ASSERT(journal->j_committing_transaction != transaction);
 	J_ASSERT(journal->j_running_transaction != transaction);
 
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 75716d3d2be..f52e5e8049f 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -150,11 +150,11 @@ static int journal_submit_commit_record(journal_t *journal,
 	 */
 	if (ret == -EOPNOTSUPP && barrier_done) {
 		printk(KERN_WARNING
-		       "JBD: barrier-based sync failed on %s - "
-		       "disabling barriers\n", journal->j_devname);
-		spin_lock(&journal->j_state_lock);
+		       "JBD2: Disabling barriers on %s, "
+		       "not supported by device\n", journal->j_devname);
+		write_lock(&journal->j_state_lock);
 		journal->j_flags &= ~JBD2_BARRIER;
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 
 		/* And try again, without the barrier */
 		lock_buffer(bh);
@@ -180,11 +180,11 @@ retry:
 	wait_on_buffer(bh);
 	if (buffer_eopnotsupp(bh) && (journal->j_flags & JBD2_BARRIER)) {
 		printk(KERN_WARNING
-		       "JBD2: wait_on_commit_record: sync failed on %s - "
-		       "disabling barriers\n", journal->j_devname);
-		spin_lock(&journal->j_state_lock);
+		       "JBD2: %s: disabling barries on %s - not supported "
+		       "by device\n", __func__, journal->j_devname);
+		write_lock(&journal->j_state_lock);
 		journal->j_flags &= ~JBD2_BARRIER;
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 
 		lock_buffer(bh);
 		clear_buffer_dirty(bh);
@@ -400,7 +400,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	jbd_debug(1, "JBD: starting commit of transaction %d\n",
 			commit_transaction->t_tid);
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	commit_transaction->t_state = T_LOCKED;
 
 	/*
@@ -417,23 +417,23 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 					      stats.run.rs_locked);
 
 	spin_lock(&commit_transaction->t_handle_lock);
-	while (commit_transaction->t_updates) {
+	while (atomic_read(&commit_transaction->t_updates)) {
 		DEFINE_WAIT(wait);
 
 		prepare_to_wait(&journal->j_wait_updates, &wait,
 					TASK_UNINTERRUPTIBLE);
-		if (commit_transaction->t_updates) {
+		if (atomic_read(&commit_transaction->t_updates)) {
 			spin_unlock(&commit_transaction->t_handle_lock);
-			spin_unlock(&journal->j_state_lock);
+			write_unlock(&journal->j_state_lock);
 			schedule();
-			spin_lock(&journal->j_state_lock);
+			write_lock(&journal->j_state_lock);
 			spin_lock(&commit_transaction->t_handle_lock);
 		}
 		finish_wait(&journal->j_wait_updates, &wait);
 	}
 	spin_unlock(&commit_transaction->t_handle_lock);
 
-	J_ASSERT (commit_transaction->t_outstanding_credits <=
+	J_ASSERT (atomic_read(&commit_transaction->t_outstanding_credits) <=
 			journal->j_max_transaction_buffers);
 
 	/*
@@ -497,7 +497,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	start_time = ktime_get();
 	commit_transaction->t_log_start = journal->j_head;
 	wake_up(&journal->j_wait_transaction_locked);
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 
 	jbd_debug (3, "JBD: commit phase 2\n");
 
@@ -519,19 +519,20 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 	 * transaction!  Now comes the tricky part: we need to write out
 	 * metadata.  Loop over the transaction's entire buffer list:
 	 */
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	commit_transaction->t_state = T_COMMIT;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 
 	trace_jbd2_commit_logging(journal, commit_transaction);
 	stats.run.rs_logging = jiffies;
 	stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
 					       stats.run.rs_logging);
-	stats.run.rs_blocks = commit_transaction->t_outstanding_credits;
+	stats.run.rs_blocks =
+		atomic_read(&commit_transaction->t_outstanding_credits);
 	stats.run.rs_blocks_logged = 0;
 
 	J_ASSERT(commit_transaction->t_nr_buffers <=
-		 commit_transaction->t_outstanding_credits);
+		 atomic_read(&commit_transaction->t_outstanding_credits));
 
 	err = 0;
 	descriptor = NULL;
@@ -616,7 +617,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
 		 * the free space in the log, but this counter is changed
 		 * by jbd2_journal_next_log_block() also.
 		 */
-		commit_transaction->t_outstanding_credits--;
+		atomic_dec(&commit_transaction->t_outstanding_credits);
 
 		/* Bump b_count to prevent truncate from stumbling over
                    the shadowed buffer!  @@@ This can go if we ever get
@@ -977,7 +978,7 @@ restart_loop:
 	 * __jbd2_journal_drop_transaction(). Otherwise we could race with
 	 * other checkpointing code processing the transaction...
 	 */
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	spin_lock(&journal->j_list_lock);
 	/*
 	 * Now recheck if some buffers did not get attached to the transaction
@@ -985,7 +986,7 @@ restart_loop:
 	 */
 	if (commit_transaction->t_forget) {
 		spin_unlock(&journal->j_list_lock);
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		goto restart_loop;
 	}
 
@@ -1003,7 +1004,8 @@ restart_loop:
 	 * File the transaction statistics
 	 */
 	stats.ts_tid = commit_transaction->t_tid;
-	stats.run.rs_handle_count = commit_transaction->t_handle_count;
+	stats.run.rs_handle_count =
+		atomic_read(&commit_transaction->t_handle_count);
 	trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
 			     commit_transaction->t_tid, &stats.run);
 
@@ -1037,7 +1039,7 @@ restart_loop:
 				journal->j_average_commit_time*3) / 4;
 	else
 		journal->j_average_commit_time = commit_time;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 
 	if (commit_transaction->t_checkpoint_list == NULL &&
 	    commit_transaction->t_checkpoint_io_list == NULL) {
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 036880895bf..ad5866aaf0f 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -41,6 +41,7 @@
 #include <linux/hash.h>
 #include <linux/log2.h>
 #include <linux/vmalloc.h>
+#include <linux/backing-dev.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/jbd2.h>
@@ -48,8 +49,6 @@
 #include <asm/uaccess.h>
 #include <asm/page.h>
 
-EXPORT_SYMBOL(jbd2_journal_start);
-EXPORT_SYMBOL(jbd2_journal_restart);
 EXPORT_SYMBOL(jbd2_journal_extend);
 EXPORT_SYMBOL(jbd2_journal_stop);
 EXPORT_SYMBOL(jbd2_journal_lock_updates);
@@ -143,7 +142,7 @@ static int kjournald2(void *arg)
 	/*
 	 * And now, wait forever for commit wakeup events.
 	 */
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 
 loop:
 	if (journal->j_flags & JBD2_UNMOUNT)
@@ -154,10 +153,10 @@ loop:
 
 	if (journal->j_commit_sequence != journal->j_commit_request) {
 		jbd_debug(1, "OK, requests differ\n");
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		del_timer_sync(&journal->j_commit_timer);
 		jbd2_journal_commit_transaction(journal);
-		spin_lock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
 		goto loop;
 	}
 
@@ -169,9 +168,9 @@ loop:
 		 * be already stopped.
 		 */
 		jbd_debug(1, "Now suspending kjournald2\n");
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		refrigerator();
-		spin_lock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
 	} else {
 		/*
 		 * We assume on resume that commits are already there,
@@ -191,9 +190,9 @@ loop:
 		if (journal->j_flags & JBD2_UNMOUNT)
 			should_sleep = 0;
 		if (should_sleep) {
-			spin_unlock(&journal->j_state_lock);
+			write_unlock(&journal->j_state_lock);
 			schedule();
-			spin_lock(&journal->j_state_lock);
+			write_lock(&journal->j_state_lock);
 		}
 		finish_wait(&journal->j_wait_commit, &wait);
 	}
@@ -211,7 +210,7 @@ loop:
 	goto loop;
 
 end_loop:
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	del_timer_sync(&journal->j_commit_timer);
 	journal->j_task = NULL;
 	wake_up(&journal->j_wait_done_commit);
@@ -234,16 +233,16 @@ static int jbd2_journal_start_thread(journal_t *journal)
 
 static void journal_kill_thread(journal_t *journal)
 {
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	journal->j_flags |= JBD2_UNMOUNT;
 
 	while (journal->j_task) {
 		wake_up(&journal->j_wait_commit);
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
-		spin_lock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
 	}
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 /*
@@ -310,7 +309,17 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
 	 */
 	J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
-	new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+retry_alloc:
+	new_bh = alloc_buffer_head(GFP_NOFS);
+	if (!new_bh) {
+		/*
+		 * Failure is not an option, but __GFP_NOFAIL is going
+		 * away; so we retry ourselves here.
+		 */
+		congestion_wait(BLK_RW_ASYNC, HZ/50);
+		goto retry_alloc;
+	}
+
 	/* keep subsequent assertions sane */
 	new_bh->b_state = 0;
 	init_buffer(new_bh, NULL, NULL);
@@ -442,7 +451,7 @@ int __jbd2_log_space_left(journal_t *journal)
 {
 	int left = journal->j_free;
 
-	assert_spin_locked(&journal->j_state_lock);
+	/* assert_spin_locked(&journal->j_state_lock); */
 
 	/*
 	 * Be pessimistic here about the number of those free blocks which
@@ -487,9 +496,9 @@ int jbd2_log_start_commit(journal_t *journal, tid_t tid)
 {
 	int ret;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	ret = __jbd2_log_start_commit(journal, tid);
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	return ret;
 }
 
@@ -508,7 +517,7 @@ int jbd2_journal_force_commit_nested(journal_t *journal)
 	transaction_t *transaction = NULL;
 	tid_t tid;
 
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 	if (journal->j_running_transaction && !current->journal_info) {
 		transaction = journal->j_running_transaction;
 		__jbd2_log_start_commit(journal, transaction->t_tid);
@@ -516,12 +525,12 @@ int jbd2_journal_force_commit_nested(journal_t *journal)
 		transaction = journal->j_committing_transaction;
 
 	if (!transaction) {
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		return 0;	/* Nothing to retry */
 	}
 
 	tid = transaction->t_tid;
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 	jbd2_log_wait_commit(journal, tid);
 	return 1;
 }
@@ -535,7 +544,7 @@ int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
 {
 	int ret = 0;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	if (journal->j_running_transaction) {
 		tid_t tid = journal->j_running_transaction->t_tid;
 
@@ -554,7 +563,7 @@ int jbd2_journal_start_commit(journal_t *journal, tid_t *ptid)
 			*ptid = journal->j_committing_transaction->t_tid;
 		ret = 1;
 	}
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	return ret;
 }
 
@@ -566,26 +575,24 @@ int jbd2_log_wait_commit(journal_t *journal, tid_t tid)
 {
 	int err = 0;
 
+	read_lock(&journal->j_state_lock);
 #ifdef CONFIG_JBD2_DEBUG
-	spin_lock(&journal->j_state_lock);
 	if (!tid_geq(journal->j_commit_request, tid)) {
 		printk(KERN_EMERG
 		       "%s: error: j_commit_request=%d, tid=%d\n",
 		       __func__, journal->j_commit_request, tid);
 	}
-	spin_unlock(&journal->j_state_lock);
 #endif
-	spin_lock(&journal->j_state_lock);
 	while (tid_gt(tid, journal->j_commit_sequence)) {
 		jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n",
 				  tid, journal->j_commit_sequence);
 		wake_up(&journal->j_wait_commit);
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		wait_event(journal->j_wait_done_commit,
 				!tid_gt(tid, journal->j_commit_sequence));
-		spin_lock(&journal->j_state_lock);
+		read_lock(&journal->j_state_lock);
 	}
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 
 	if (unlikely(is_journal_aborted(journal))) {
 		printk(KERN_EMERG "journal commit I/O error\n");
@@ -602,7 +609,7 @@ int jbd2_journal_next_log_block(journal_t *journal, unsigned long long *retp)
 {
 	unsigned long blocknr;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	J_ASSERT(journal->j_free > 1);
 
 	blocknr = journal->j_head;
@@ -610,7 +617,7 @@ int jbd2_journal_next_log_block(journal_t *journal, unsigned long long *retp)
 	journal->j_free--;
 	if (journal->j_head == journal->j_last)
 		journal->j_head = journal->j_first;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	return jbd2_journal_bmap(journal, blocknr, retp);
 }
 
@@ -830,7 +837,7 @@ static journal_t * journal_init_common (void)
 	mutex_init(&journal->j_checkpoint_mutex);
 	spin_lock_init(&journal->j_revoke_lock);
 	spin_lock_init(&journal->j_list_lock);
-	spin_lock_init(&journal->j_state_lock);
+	rwlock_init(&journal->j_state_lock);
 
 	journal->j_commit_interval = (HZ * JBD2_DEFAULT_MAX_COMMIT_AGE);
 	journal->j_min_batch_time = 0;
@@ -1096,14 +1103,14 @@ void jbd2_journal_update_superblock(journal_t *journal, int wait)
 		set_buffer_uptodate(bh);
 	}
 
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 	jbd_debug(1,"JBD: updating superblock (start %ld, seq %d, errno %d)\n",
 		  journal->j_tail, journal->j_tail_sequence, journal->j_errno);
 
 	sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
 	sb->s_start    = cpu_to_be32(journal->j_tail);
 	sb->s_errno    = cpu_to_be32(journal->j_errno);
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 
 	BUFFER_TRACE(bh, "marking dirty");
 	mark_buffer_dirty(bh);
@@ -1124,12 +1131,12 @@ out:
 	 * any future commit will have to be careful to update the
 	 * superblock again to re-record the true start of the log. */
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	if (sb->s_start)
 		journal->j_flags &= ~JBD2_FLUSHED;
 	else
 		journal->j_flags |= JBD2_FLUSHED;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 /*
@@ -1391,13 +1398,9 @@ int jbd2_journal_check_used_features (journal_t *journal, unsigned long compat,
 int jbd2_journal_check_available_features (journal_t *journal, unsigned long compat,
 				      unsigned long ro, unsigned long incompat)
 {
-	journal_superblock_t *sb;
-
 	if (!compat && !ro && !incompat)
 		return 1;
 
-	sb = journal->j_superblock;
-
 	/* We can support any known requested features iff the
 	 * superblock is in version 2.  Otherwise we fail to support any
 	 * extended sb features. */
@@ -1545,7 +1548,7 @@ int jbd2_journal_flush(journal_t *journal)
 	transaction_t *transaction = NULL;
 	unsigned long old_tail;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 
 	/* Force everything buffered to the log... */
 	if (journal->j_running_transaction) {
@@ -1558,10 +1561,10 @@ int jbd2_journal_flush(journal_t *journal)
 	if (transaction) {
 		tid_t tid = transaction->t_tid;
 
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		jbd2_log_wait_commit(journal, tid);
 	} else {
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 	}
 
 	/* ...and flush everything in the log out to disk. */
@@ -1585,12 +1588,12 @@ int jbd2_journal_flush(journal_t *journal)
 	 * the magic code for a fully-recovered superblock.  Any future
 	 * commits of data to the journal will restore the current
 	 * s_start value. */
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	old_tail = journal->j_tail;
 	journal->j_tail = 0;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	jbd2_journal_update_superblock(journal, 1);
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	journal->j_tail = old_tail;
 
 	J_ASSERT(!journal->j_running_transaction);
@@ -1598,7 +1601,7 @@ int jbd2_journal_flush(journal_t *journal)
 	J_ASSERT(!journal->j_checkpoint_transactions);
 	J_ASSERT(journal->j_head == journal->j_tail);
 	J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence);
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	return 0;
 }
 
@@ -1617,7 +1620,6 @@ int jbd2_journal_flush(journal_t *journal)
 
 int jbd2_journal_wipe(journal_t *journal, int write)
 {
-	journal_superblock_t *sb;
 	int err = 0;
 
 	J_ASSERT (!(journal->j_flags & JBD2_LOADED));
@@ -1626,8 +1628,6 @@ int jbd2_journal_wipe(journal_t *journal, int write)
 	if (err)
 		return err;
 
-	sb = journal->j_superblock;
-
 	if (!journal->j_tail)
 		goto no_recovery;
 
@@ -1665,12 +1665,12 @@ void __jbd2_journal_abort_hard(journal_t *journal)
 	printk(KERN_ERR "Aborting journal on device %s.\n",
 	       journal->j_devname);
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	journal->j_flags |= JBD2_ABORT;
 	transaction = journal->j_running_transaction;
 	if (transaction)
 		__jbd2_log_start_commit(journal, transaction->t_tid);
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 /* Soft abort: record the abort error status in the journal superblock,
@@ -1755,12 +1755,12 @@ int jbd2_journal_errno(journal_t *journal)
 {
 	int err;
 
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 	if (journal->j_flags & JBD2_ABORT)
 		err = -EROFS;
 	else
 		err = journal->j_errno;
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 	return err;
 }
 
@@ -1775,12 +1775,12 @@ int jbd2_journal_clear_err(journal_t *journal)
 {
 	int err = 0;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	if (journal->j_flags & JBD2_ABORT)
 		err = -EROFS;
 	else
 		journal->j_errno = 0;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	return err;
 }
 
@@ -1793,10 +1793,10 @@ int jbd2_journal_clear_err(journal_t *journal)
  */
 void jbd2_journal_ack_err(journal_t *journal)
 {
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	if (journal->j_errno)
 		journal->j_flags |= JBD2_ACK_ERR;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 int jbd2_journal_blocks_per_page(struct inode *inode)
@@ -2201,8 +2201,6 @@ void jbd2_journal_init_jbd_inode(struct jbd2_inode *jinode, struct inode *inode)
 void jbd2_journal_release_jbd_inode(journal_t *journal,
 				    struct jbd2_inode *jinode)
 {
-	int writeout = 0;
-
 	if (!journal)
 		return;
 restart:
@@ -2219,9 +2217,6 @@ restart:
 		goto restart;
 	}
 
-	/* Do we need to wait for data writeback? */
-	if (journal->j_committing_transaction == jinode->i_transaction)
-		writeout = 1;
 	if (jinode->i_transaction) {
 		list_del(&jinode->i_list);
 		jinode->i_transaction = NULL;
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 049281b7cb8..2bc4d5f116f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -285,12 +285,10 @@ int jbd2_journal_recover(journal_t *journal)
 int jbd2_journal_skip_recovery(journal_t *journal)
 {
 	int			err;
-	journal_superblock_t *	sb;
 
 	struct recovery_info	info;
 
 	memset (&info, 0, sizeof(info));
-	sb = journal->j_superblock;
 
 	err = do_one_pass(journal, &info, PASS_SCAN);
 
@@ -299,7 +297,8 @@ int jbd2_journal_skip_recovery(journal_t *journal)
 		++journal->j_transaction_sequence;
 	} else {
 #ifdef CONFIG_JBD2_DEBUG
-		int dropped = info.end_transaction - be32_to_cpu(sb->s_sequence);
+		int dropped = info.end_transaction - 
+			be32_to_cpu(journal->j_superblock->s_sequence);
 #endif
 		jbd_debug(1,
 			  "JBD: ignoring %d transaction%s from the journal.\n",
@@ -365,11 +364,6 @@ static int do_one_pass(journal_t *journal,
 	int			tag_bytes = journal_tag_bytes(journal);
 	__u32			crc32_sum = ~0; /* Transactional Checksums */
 
-	/* Precompute the maximum metadata descriptors in a descriptor block */
-	int			MAX_BLOCKS_PER_DESC;
-	MAX_BLOCKS_PER_DESC = ((journal->j_blocksize-sizeof(journal_header_t))
-			       / tag_bytes);
-
 	/*
 	 * First thing is to establish what we expect to find in the log
 	 * (in terms of transaction IDs), and where (in terms of log
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index b8e0806681b..d95cc9d0401 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -26,6 +26,8 @@
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/hrtimer.h>
+#include <linux/backing-dev.h>
+#include <linux/module.h>
 
 static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh);
 
@@ -53,6 +55,9 @@ jbd2_get_transaction(journal_t *journal, transaction_t *transaction)
 	transaction->t_tid = journal->j_transaction_sequence++;
 	transaction->t_expires = jiffies + journal->j_commit_interval;
 	spin_lock_init(&transaction->t_handle_lock);
+	atomic_set(&transaction->t_updates, 0);
+	atomic_set(&transaction->t_outstanding_credits, 0);
+	atomic_set(&transaction->t_handle_count, 0);
 	INIT_LIST_HEAD(&transaction->t_inode_list);
 	INIT_LIST_HEAD(&transaction->t_private_list);
 
@@ -83,65 +88,75 @@ jbd2_get_transaction(journal_t *journal, transaction_t *transaction)
  * transaction's buffer credits.
  */
 
-static int start_this_handle(journal_t *journal, handle_t *handle)
+static int start_this_handle(journal_t *journal, handle_t *handle,
+			     int gfp_mask)
 {
 	transaction_t *transaction;
 	int needed;
 	int nblocks = handle->h_buffer_credits;
 	transaction_t *new_transaction = NULL;
-	int ret = 0;
 	unsigned long ts = jiffies;
 
 	if (nblocks > journal->j_max_transaction_buffers) {
 		printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n",
 		       current->comm, nblocks,
 		       journal->j_max_transaction_buffers);
-		ret = -ENOSPC;
-		goto out;
+		return -ENOSPC;
 	}
 
 alloc_transaction:
 	if (!journal->j_running_transaction) {
-		new_transaction = kzalloc(sizeof(*new_transaction),
-						GFP_NOFS|__GFP_NOFAIL);
+		new_transaction = kzalloc(sizeof(*new_transaction), gfp_mask);
 		if (!new_transaction) {
-			ret = -ENOMEM;
-			goto out;
+			/*
+			 * If __GFP_FS is not present, then we may be
+			 * being called from inside the fs writeback
+			 * layer, so we MUST NOT fail.  Since
+			 * __GFP_NOFAIL is going away, we will arrange
+			 * to retry the allocation ourselves.
+			 */
+			if ((gfp_mask & __GFP_FS) == 0) {
+				congestion_wait(BLK_RW_ASYNC, HZ/50);
+				goto alloc_transaction;
+			}
+			return -ENOMEM;
 		}
 	}
 
 	jbd_debug(3, "New handle %p going live.\n", handle);
 
-repeat:
-
 	/*
 	 * We need to hold j_state_lock until t_updates has been incremented,
 	 * for proper journal barrier handling
 	 */
-	spin_lock(&journal->j_state_lock);
-repeat_locked:
+repeat:
+	read_lock(&journal->j_state_lock);
 	if (is_journal_aborted(journal) ||
 	    (journal->j_errno != 0 && !(journal->j_flags & JBD2_ACK_ERR))) {
-		spin_unlock(&journal->j_state_lock);
-		ret = -EROFS;
-		goto out;
+		read_unlock(&journal->j_state_lock);
+		kfree(new_transaction);
+		return -EROFS;
 	}
 
 	/* Wait on the journal's transaction barrier if necessary */
 	if (journal->j_barrier_count) {
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		wait_event(journal->j_wait_transaction_locked,
 				journal->j_barrier_count == 0);
 		goto repeat;
 	}
 
 	if (!journal->j_running_transaction) {
-		if (!new_transaction) {
-			spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
+		if (!new_transaction)
 			goto alloc_transaction;
+		write_lock(&journal->j_state_lock);
+		if (!journal->j_running_transaction) {
+			jbd2_get_transaction(journal, new_transaction);
+			new_transaction = NULL;
 		}
-		jbd2_get_transaction(journal, new_transaction);
-		new_transaction = NULL;
+		write_unlock(&journal->j_state_lock);
+		goto repeat;
 	}
 
 	transaction = journal->j_running_transaction;
@@ -155,7 +170,7 @@ repeat_locked:
 
 		prepare_to_wait(&journal->j_wait_transaction_locked,
 					&wait, TASK_UNINTERRUPTIBLE);
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		schedule();
 		finish_wait(&journal->j_wait_transaction_locked, &wait);
 		goto repeat;
@@ -166,8 +181,8 @@ repeat_locked:
 	 * buffers requested by this operation, we need to stall pending a log
 	 * checkpoint to free some more log space.
 	 */
-	spin_lock(&transaction->t_handle_lock);
-	needed = transaction->t_outstanding_credits + nblocks;
+	needed = atomic_add_return(nblocks,
+				   &transaction->t_outstanding_credits);
 
 	if (needed > journal->j_max_transaction_buffers) {
 		/*
@@ -178,11 +193,11 @@ repeat_locked:
 		DEFINE_WAIT(wait);
 
 		jbd_debug(2, "Handle %p starting new commit...\n", handle);
-		spin_unlock(&transaction->t_handle_lock);
+		atomic_sub(nblocks, &transaction->t_outstanding_credits);
 		prepare_to_wait(&journal->j_wait_transaction_locked, &wait,
 				TASK_UNINTERRUPTIBLE);
 		__jbd2_log_start_commit(journal, transaction->t_tid);
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 		schedule();
 		finish_wait(&journal->j_wait_transaction_locked, &wait);
 		goto repeat;
@@ -215,35 +230,48 @@ repeat_locked:
 	 */
 	if (__jbd2_log_space_left(journal) < jbd_space_needed(journal)) {
 		jbd_debug(2, "Handle %p waiting for checkpoint...\n", handle);
-		spin_unlock(&transaction->t_handle_lock);
-		__jbd2_log_wait_for_space(journal);
-		goto repeat_locked;
+		atomic_sub(nblocks, &transaction->t_outstanding_credits);
+		read_unlock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
+		if (__jbd2_log_space_left(journal) < jbd_space_needed(journal))
+			__jbd2_log_wait_for_space(journal);
+		write_unlock(&journal->j_state_lock);
+		goto repeat;
 	}
 
 	/* OK, account for the buffers that this operation expects to
-	 * use and add the handle to the running transaction. */
-
-	if (time_after(transaction->t_start, ts)) {
+	 * use and add the handle to the running transaction. 
+	 *
+	 * In order for t_max_wait to be reliable, it must be
+	 * protected by a lock.  But doing so will mean that
+	 * start_this_handle() can not be run in parallel on SMP
+	 * systems, which limits our scalability.  So we only enable
+	 * it when debugging is enabled.  We may want to use a
+	 * separate flag, eventually, so we can enable this
+	 * independently of debugging.
+	 */
+#ifdef CONFIG_JBD2_DEBUG
+	if (jbd2_journal_enable_debug &&
+	    time_after(transaction->t_start, ts)) {
 		ts = jbd2_time_diff(ts, transaction->t_start);
+		spin_lock(&transaction->t_handle_lock);
 		if (ts > transaction->t_max_wait)
 			transaction->t_max_wait = ts;
+		spin_unlock(&transaction->t_handle_lock);
 	}
-
+#endif
 	handle->h_transaction = transaction;
-	transaction->t_outstanding_credits += nblocks;
-	transaction->t_updates++;
-	transaction->t_handle_count++;
+	atomic_inc(&transaction->t_updates);
+	atomic_inc(&transaction->t_handle_count);
 	jbd_debug(4, "Handle %p given %d credits (total %d, free %d)\n",
-		  handle, nblocks, transaction->t_outstanding_credits,
+		  handle, nblocks,
+		  atomic_read(&transaction->t_outstanding_credits),
 		  __jbd2_log_space_left(journal));
-	spin_unlock(&transaction->t_handle_lock);
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 
 	lock_map_acquire(&handle->h_lockdep_map);
-out:
-	if (unlikely(new_transaction))		/* It's usually NULL */
-		kfree(new_transaction);
-	return ret;
+	kfree(new_transaction);
+	return 0;
 }
 
 static struct lock_class_key jbd2_handle_key;
@@ -278,7 +306,7 @@ static handle_t *new_handle(int nblocks)
  *
  * Return a pointer to a newly allocated handle, or NULL on failure
  */
-handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
+handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int gfp_mask)
 {
 	handle_t *handle = journal_current_handle();
 	int err;
@@ -298,7 +326,7 @@ handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
 
 	current->journal_info = handle;
 
-	err = start_this_handle(journal, handle);
+	err = start_this_handle(journal, handle, gfp_mask);
 	if (err < 0) {
 		jbd2_free_handle(handle);
 		current->journal_info = NULL;
@@ -308,6 +336,15 @@ handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
 out:
 	return handle;
 }
+EXPORT_SYMBOL(jbd2__journal_start);
+
+
+handle_t *jbd2_journal_start(journal_t *journal, int nblocks)
+{
+	return jbd2__journal_start(journal, nblocks, GFP_NOFS);
+}
+EXPORT_SYMBOL(jbd2_journal_start);
+
 
 /**
  * int jbd2_journal_extend() - extend buffer credits.
@@ -342,7 +379,7 @@ int jbd2_journal_extend(handle_t *handle, int nblocks)
 
 	result = 1;
 
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 
 	/* Don't extend a locked-down transaction! */
 	if (handle->h_transaction->t_state != T_RUNNING) {
@@ -352,7 +389,7 @@ int jbd2_journal_extend(handle_t *handle, int nblocks)
 	}
 
 	spin_lock(&transaction->t_handle_lock);
-	wanted = transaction->t_outstanding_credits + nblocks;
+	wanted = atomic_read(&transaction->t_outstanding_credits) + nblocks;
 
 	if (wanted > journal->j_max_transaction_buffers) {
 		jbd_debug(3, "denied handle %p %d blocks: "
@@ -367,14 +404,14 @@ int jbd2_journal_extend(handle_t *handle, int nblocks)
 	}
 
 	handle->h_buffer_credits += nblocks;
-	transaction->t_outstanding_credits += nblocks;
+	atomic_add(nblocks, &transaction->t_outstanding_credits);
 	result = 0;
 
 	jbd_debug(3, "extended handle %p by %d\n", handle, nblocks);
 unlock:
 	spin_unlock(&transaction->t_handle_lock);
 error_out:
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 out:
 	return result;
 }
@@ -394,8 +431,7 @@ out:
  * transaction capabable of guaranteeing the requested number of
  * credits.
  */
-
-int jbd2_journal_restart(handle_t *handle, int nblocks)
+int jbd2__journal_restart(handle_t *handle, int nblocks, int gfp_mask)
 {
 	transaction_t *transaction = handle->h_transaction;
 	journal_t *journal = transaction->t_journal;
@@ -410,29 +446,35 @@ int jbd2_journal_restart(handle_t *handle, int nblocks)
 	 * First unlink the handle from its current transaction, and start the
 	 * commit on that.
 	 */
-	J_ASSERT(transaction->t_updates > 0);
+	J_ASSERT(atomic_read(&transaction->t_updates) > 0);
 	J_ASSERT(journal_current_handle() == handle);
 
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 	spin_lock(&transaction->t_handle_lock);
-	transaction->t_outstanding_credits -= handle->h_buffer_credits;
-	transaction->t_updates--;
-
-	if (!transaction->t_updates)
+	atomic_sub(handle->h_buffer_credits,
+		   &transaction->t_outstanding_credits);
+	if (atomic_dec_and_test(&transaction->t_updates))
 		wake_up(&journal->j_wait_updates);
 	spin_unlock(&transaction->t_handle_lock);
 
 	jbd_debug(2, "restarting handle %p\n", handle);
 	__jbd2_log_start_commit(journal, transaction->t_tid);
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 
 	lock_map_release(&handle->h_lockdep_map);
 	handle->h_buffer_credits = nblocks;
-	ret = start_this_handle(journal, handle);
+	ret = start_this_handle(journal, handle, gfp_mask);
 	return ret;
 }
+EXPORT_SYMBOL(jbd2__journal_restart);
 
 
+int jbd2_journal_restart(handle_t *handle, int nblocks)
+{
+	return jbd2__journal_restart(handle, nblocks, GFP_NOFS);
+}
+EXPORT_SYMBOL(jbd2_journal_restart);
+
 /**
  * void jbd2_journal_lock_updates () - establish a transaction barrier.
  * @journal:  Journal to establish a barrier on.
@@ -447,7 +489,7 @@ void jbd2_journal_lock_updates(journal_t *journal)
 {
 	DEFINE_WAIT(wait);
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	++journal->j_barrier_count;
 
 	/* Wait until there are no running updates */
@@ -458,19 +500,19 @@ void jbd2_journal_lock_updates(journal_t *journal)
 			break;
 
 		spin_lock(&transaction->t_handle_lock);
-		if (!transaction->t_updates) {
+		if (!atomic_read(&transaction->t_updates)) {
 			spin_unlock(&transaction->t_handle_lock);
 			break;
 		}
 		prepare_to_wait(&journal->j_wait_updates, &wait,
 				TASK_UNINTERRUPTIBLE);
 		spin_unlock(&transaction->t_handle_lock);
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		schedule();
 		finish_wait(&journal->j_wait_updates, &wait);
-		spin_lock(&journal->j_state_lock);
+		write_lock(&journal->j_state_lock);
 	}
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 
 	/*
 	 * We have now established a barrier against other normal updates, but
@@ -494,9 +536,9 @@ void jbd2_journal_unlock_updates (journal_t *journal)
 	J_ASSERT(journal->j_barrier_count != 0);
 
 	mutex_unlock(&journal->j_barrier);
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	--journal->j_barrier_count;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 	wake_up(&journal->j_wait_transaction_locked);
 }
 
@@ -1238,7 +1280,8 @@ int jbd2_journal_stop(handle_t *handle)
 {
 	transaction_t *transaction = handle->h_transaction;
 	journal_t *journal = transaction->t_journal;
-	int err;
+	int err, wait_for_commit = 0;
+	tid_t tid;
 	pid_t pid;
 
 	J_ASSERT(journal_current_handle() == handle);
@@ -1246,7 +1289,7 @@ int jbd2_journal_stop(handle_t *handle)
 	if (is_handle_aborted(handle))
 		err = -EIO;
 	else {
-		J_ASSERT(transaction->t_updates > 0);
+		J_ASSERT(atomic_read(&transaction->t_updates) > 0);
 		err = 0;
 	}
 
@@ -1291,9 +1334,9 @@ int jbd2_journal_stop(handle_t *handle)
 
 		journal->j_last_sync_writer = pid;
 
-		spin_lock(&journal->j_state_lock);
+		read_lock(&journal->j_state_lock);
 		commit_time = journal->j_average_commit_time;
-		spin_unlock(&journal->j_state_lock);
+		read_unlock(&journal->j_state_lock);
 
 		trans_time = ktime_to_ns(ktime_sub(ktime_get(),
 						   transaction->t_start_time));
@@ -1314,14 +1357,8 @@ int jbd2_journal_stop(handle_t *handle)
 	if (handle->h_sync)
 		transaction->t_synchronous_commit = 1;
 	current->journal_info = NULL;
-	spin_lock(&transaction->t_handle_lock);
-	transaction->t_outstanding_credits -= handle->h_buffer_credits;
-	transaction->t_updates--;
-	if (!transaction->t_updates) {
-		wake_up(&journal->j_wait_updates);
-		if (journal->j_barrier_count)
-			wake_up(&journal->j_wait_transaction_locked);
-	}
+	atomic_sub(handle->h_buffer_credits,
+		   &transaction->t_outstanding_credits);
 
 	/*
 	 * If the handle is marked SYNC, we need to set another commit
@@ -1330,15 +1367,13 @@ int jbd2_journal_stop(handle_t *handle)
 	 * transaction is too old now.
 	 */
 	if (handle->h_sync ||
-			transaction->t_outstanding_credits >
-				journal->j_max_transaction_buffers ||
-			time_after_eq(jiffies, transaction->t_expires)) {
+	    (atomic_read(&transaction->t_outstanding_credits) >
+	     journal->j_max_transaction_buffers) ||
+	    time_after_eq(jiffies, transaction->t_expires)) {
 		/* Do this even for aborted journals: an abort still
 		 * completes the commit thread, it just doesn't write
 		 * anything to disk. */
-		tid_t tid = transaction->t_tid;
 
-		spin_unlock(&transaction->t_handle_lock);
 		jbd_debug(2, "transaction too old, requesting commit for "
 					"handle %p\n", handle);
 		/* This is non-blocking */
@@ -1349,11 +1384,25 @@ int jbd2_journal_stop(handle_t *handle)
 		 * to wait for the commit to complete.
 		 */
 		if (handle->h_sync && !(current->flags & PF_MEMALLOC))
-			err = jbd2_log_wait_commit(journal, tid);
-	} else {
-		spin_unlock(&transaction->t_handle_lock);
+			wait_for_commit = 1;
 	}
 
+	/*
+	 * Once we drop t_updates, if it goes to zero the transaction
+	 * could start commiting on us and eventually disappear.  So
+	 * once we do this, we must not dereference transaction
+	 * pointer again.
+	 */
+	tid = transaction->t_tid;
+	if (atomic_dec_and_test(&transaction->t_updates)) {
+		wake_up(&journal->j_wait_updates);
+		if (journal->j_barrier_count)
+			wake_up(&journal->j_wait_transaction_locked);
+	}
+
+	if (wait_for_commit)
+		err = jbd2_log_wait_commit(journal, tid);
+
 	lock_map_release(&handle->h_lockdep_map);
 
 	jbd2_free_handle(handle);
@@ -1719,7 +1768,7 @@ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
 		goto zap_buffer_unlocked;
 
 	/* OK, we have data buffer in journaled mode */
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	jbd_lock_bh_state(bh);
 	spin_lock(&journal->j_list_lock);
 
@@ -1772,7 +1821,7 @@ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
 			jbd2_journal_put_journal_head(jh);
 			spin_unlock(&journal->j_list_lock);
 			jbd_unlock_bh_state(bh);
-			spin_unlock(&journal->j_state_lock);
+			write_unlock(&journal->j_state_lock);
 			return ret;
 		} else {
 			/* There is no currently-running transaction. So the
@@ -1786,7 +1835,7 @@ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
 				jbd2_journal_put_journal_head(jh);
 				spin_unlock(&journal->j_list_lock);
 				jbd_unlock_bh_state(bh);
-				spin_unlock(&journal->j_state_lock);
+				write_unlock(&journal->j_state_lock);
 				return ret;
 			} else {
 				/* The orphan record's transaction has
@@ -1810,7 +1859,7 @@ static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
 		jbd2_journal_put_journal_head(jh);
 		spin_unlock(&journal->j_list_lock);
 		jbd_unlock_bh_state(bh);
-		spin_unlock(&journal->j_state_lock);
+		write_unlock(&journal->j_state_lock);
 		return 0;
 	} else {
 		/* Good, the buffer belongs to the running transaction.
@@ -1829,7 +1878,7 @@ zap_buffer:
 zap_buffer_no_jh:
 	spin_unlock(&journal->j_list_lock);
 	jbd_unlock_bh_state(bh);
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 zap_buffer_unlocked:
 	clear_buffer_dirty(bh);
 	J_ASSERT_BH(bh, !buffer_jbddirty(bh));
@@ -2136,9 +2185,9 @@ int jbd2_journal_begin_ordered_truncate(journal_t *journal,
 	/* Locks are here just to force reading of recent values, it is
 	 * enough that the transaction was not committing before we started
 	 * a transaction adding the inode to orphan list */
-	spin_lock(&journal->j_state_lock);
+	read_lock(&journal->j_state_lock);
 	commit_trans = journal->j_committing_transaction;
-	spin_unlock(&journal->j_state_lock);
+	read_unlock(&journal->j_state_lock);
 	spin_lock(&journal->j_list_lock);
 	inode_trans = jinode->i_transaction;
 	spin_unlock(&journal->j_list_lock);
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index a43d07e7b92..cc1bb33b59b 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -61,8 +61,8 @@ config NFS_V3_ACL
 	  If unsure, say N.
 
 config NFS_V4
-	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFS_FS && EXPERIMENTAL
+	bool "NFS client support for NFS version 4"
+	depends on NFS_FS
 	select RPCSEC_GSS_KRB5
 	help
 	  This option enables support for version 4 of the NFS protocol
@@ -72,16 +72,16 @@ config NFS_V4
 	  space programs which can be found in the Linux nfs-utils package,
 	  available from http://linux-nfs.org/.
 
-	  If unsure, say N.
+	  If unsure, say Y.
 
 config NFS_V4_1
-	bool "NFS client support for NFSv4.1 (DEVELOPER ONLY)"
+	bool "NFS client support for NFSv4.1 (EXPERIMENTAL)"
 	depends on NFS_V4 && EXPERIMENTAL
 	help
 	  This option enables support for minor version 1 of the NFSv4 protocol
 	  (draft-ietf-nfsv4-minorversion1) in the kernel's NFS client.
 
-	  Unless you're an NFS developer, say N.
+	  If unsure, say N.
 
 config ROOT_NFS
 	bool "Root file system on NFS"
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index a08770a7e85..930d10fecda 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -37,8 +37,8 @@ __be32 nfs4_callback_getattr(struct cb_getattrargs *args, struct cb_getattrres *
 	if (inode == NULL)
 		goto out_putclient;
 	nfsi = NFS_I(inode);
-	down_read(&nfsi->rwsem);
-	delegation = nfsi->delegation;
+	rcu_read_lock();
+	delegation = rcu_dereference(nfsi->delegation);
 	if (delegation == NULL || (delegation->type & FMODE_WRITE) == 0)
 		goto out_iput;
 	res->size = i_size_read(inode);
@@ -53,7 +53,7 @@ __be32 nfs4_callback_getattr(struct cb_getattrargs *args, struct cb_getattrres *
 		args->bitmap[1];
 	res->status = 0;
 out_iput:
-	up_read(&nfsi->rwsem);
+	rcu_read_unlock();
 	iput(inode);
 out_putclient:
 	nfs_put_client(clp);
@@ -62,16 +62,6 @@ out:
 	return res->status;
 }
 
-static int (*nfs_validate_delegation_stateid(struct nfs_client *clp))(struct nfs_delegation *, const nfs4_stateid *)
-{
-#if defined(CONFIG_NFS_V4_1)
-	if (clp->cl_minorversion > 0)
-		return nfs41_validate_delegation_stateid;
-#endif
-	return nfs4_validate_delegation_stateid;
-}
-
-
 __be32 nfs4_callback_recall(struct cb_recallargs *args, void *dummy)
 {
 	struct nfs_client *clp;
@@ -92,8 +82,7 @@ __be32 nfs4_callback_recall(struct cb_recallargs *args, void *dummy)
 		inode = nfs_delegation_find_inode(clp, &args->fh);
 		if (inode != NULL) {
 			/* Set up a helper thread to actually return the delegation */
-			switch (nfs_async_inode_return_delegation(inode, &args->stateid,
-								  nfs_validate_delegation_stateid(clp))) {
+			switch (nfs_async_inode_return_delegation(inode, &args->stateid)) {
 				case 0:
 					res = 0;
 					break;
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index d25b5257b7a..4e7df2adb21 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -150,6 +150,7 @@ static struct nfs_client *nfs_alloc_client(const struct nfs_client_initdata *cl_
 	clp->cl_boot_time = CURRENT_TIME;
 	clp->cl_state = 1 << NFS4CLNT_LEASE_EXPIRED;
 	clp->cl_minorversion = cl_init->minorversion;
+	clp->cl_mvops = nfs_v4_minor_ops[cl_init->minorversion];
 #endif
 	cred = rpc_lookup_machine_cred();
 	if (!IS_ERR(cred))
@@ -178,7 +179,7 @@ static void nfs4_clear_client_minor_version(struct nfs_client *clp)
 		clp->cl_session = NULL;
 	}
 
-	clp->cl_call_sync = _nfs4_call_sync;
+	clp->cl_mvops = nfs_v4_minor_ops[0];
 #endif /* CONFIG_NFS_V4_1 */
 }
 
@@ -188,7 +189,7 @@ static void nfs4_clear_client_minor_version(struct nfs_client *clp)
 static void nfs4_destroy_callback(struct nfs_client *clp)
 {
 	if (__test_and_clear_bit(NFS_CS_CALLBACK, &clp->cl_res_state))
-		nfs_callback_down(clp->cl_minorversion);
+		nfs_callback_down(clp->cl_mvops->minor_version);
 }
 
 static void nfs4_shutdown_client(struct nfs_client *clp)
@@ -1126,7 +1127,7 @@ static int nfs4_init_callback(struct nfs_client *clp)
 				return error;
 		}
 
-		error = nfs_callback_up(clp->cl_minorversion,
+		error = nfs_callback_up(clp->cl_mvops->minor_version,
 					clp->cl_rpcclient->cl_xprt);
 		if (error < 0) {
 			dprintk("%s: failed to start callback. Error = %d\n",
@@ -1143,10 +1144,8 @@ static int nfs4_init_callback(struct nfs_client *clp)
  */
 static int nfs4_init_client_minor_version(struct nfs_client *clp)
 {
-	clp->cl_call_sync = _nfs4_call_sync;
-
 #if defined(CONFIG_NFS_V4_1)
-	if (clp->cl_minorversion) {
+	if (clp->cl_mvops->minor_version) {
 		struct nfs4_session *session = NULL;
 		/*
 		 * Create the session and mark it expired.
@@ -1158,7 +1157,13 @@ static int nfs4_init_client_minor_version(struct nfs_client *clp)
 			return -ENOMEM;
 
 		clp->cl_session = session;
-		clp->cl_call_sync = _nfs4_call_sync_session;
+		/*
+		 * The create session reply races with the server back
+		 * channel probe. Mark the client NFS_CS_SESSION_INITING
+		 * so that the client back channel can find the
+		 * nfs_client struct
+		 */
+		clp->cl_cons_state = NFS_CS_SESSION_INITING;
 	}
 #endif /* CONFIG_NFS_V4_1 */
 
@@ -1454,7 +1459,7 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data,
 				data->authflavor,
 				parent_server->client->cl_xprt->prot,
 				parent_server->client->cl_timeout,
-				parent_client->cl_minorversion);
+				parent_client->cl_mvops->minor_version);
 	if (error < 0)
 		goto error;
 
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 30163454397..b9c3c43cea1 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -268,14 +268,6 @@ out:
 	return status;
 }
 
-/* Sync all data to disk upon delegation return */
-static void nfs_msync_inode(struct inode *inode)
-{
-	filemap_fdatawrite(inode->i_mapping);
-	nfs_wb_all(inode);
-	filemap_fdatawait(inode->i_mapping);
-}
-
 /*
  * Basic procedure for returning a delegation to the server
  */
@@ -367,7 +359,7 @@ int nfs_inode_return_delegation(struct inode *inode)
 		delegation = nfs_detach_delegation_locked(nfsi, NULL, clp);
 		spin_unlock(&clp->cl_lock);
 		if (delegation != NULL) {
-			nfs_msync_inode(inode);
+			nfs_wb_all(inode);
 			err = __nfs_inode_return_delegation(inode, delegation, 1);
 		}
 	}
@@ -471,9 +463,7 @@ void nfs_expire_unreferenced_delegations(struct nfs_client *clp)
 /*
  * Asynchronous delegation recall!
  */
-int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid,
-				      int (*validate_stateid)(struct nfs_delegation *delegation,
-							      const nfs4_stateid *stateid))
+int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid)
 {
 	struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
 	struct nfs_delegation *delegation;
@@ -481,7 +471,7 @@ int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *s
 	rcu_read_lock();
 	delegation = rcu_dereference(NFS_I(inode)->delegation);
 
-	if (!validate_stateid(delegation, stateid)) {
+	if (!clp->cl_mvops->validate_stateid(delegation, stateid)) {
 		rcu_read_unlock();
 		return -ENOENT;
 	}
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index 69e7b814012..2026304bda1 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -34,9 +34,7 @@ enum {
 int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
 void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
 int nfs_inode_return_delegation(struct inode *inode);
-int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid,
-				      int (*validate_stateid)(struct nfs_delegation *delegation,
-							      const nfs4_stateid *stateid));
+int nfs_async_inode_return_delegation(struct inode *inode, const nfs4_stateid *stateid);
 void nfs_inode_return_delegation_noreclaim(struct inode *inode);
 
 struct inode *nfs_delegation_find_inode(struct nfs_client *clp, const struct nfs_fh *fhandle);
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 832e9e23932..29539ceeb74 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1652,16 +1652,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		}
 	}
 
-	/*
-	 * ... prune child dentries and writebacks if needed.
-	 */
-	if (atomic_read(&old_dentry->d_count) > 1) {
-		if (S_ISREG(old_inode->i_mode))
-			nfs_wb_all(old_inode);
-		shrink_dcache_parent(old_dentry);
-	}
 	nfs_inode_return_delegation(old_inode);
-
 	if (new_inode != NULL)
 		nfs_inode_return_delegation(new_inode);
 
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index ad4cd31d605..064a8096167 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -69,6 +69,7 @@ struct nfs_direct_req {
 
 	/* I/O parameters */
 	struct nfs_open_context	*ctx;		/* file open context info */
+	struct nfs_lock_context *l_ctx;		/* Lock context info */
 	struct kiocb *		iocb;		/* controlling i/o request */
 	struct inode *		inode;		/* target file of i/o */
 
@@ -160,6 +161,7 @@ static inline struct nfs_direct_req *nfs_direct_req_alloc(void)
 	INIT_LIST_HEAD(&dreq->rewrite_list);
 	dreq->iocb = NULL;
 	dreq->ctx = NULL;
+	dreq->l_ctx = NULL;
 	spin_lock_init(&dreq->lock);
 	atomic_set(&dreq->io_count, 0);
 	dreq->count = 0;
@@ -173,6 +175,8 @@ static void nfs_direct_req_free(struct kref *kref)
 {
 	struct nfs_direct_req *dreq = container_of(kref, struct nfs_direct_req, kref);
 
+	if (dreq->l_ctx != NULL)
+		nfs_put_lock_context(dreq->l_ctx);
 	if (dreq->ctx != NULL)
 		put_nfs_open_context(dreq->ctx);
 	kmem_cache_free(nfs_direct_cachep, dreq);
@@ -336,6 +340,7 @@ static ssize_t nfs_direct_read_schedule_segment(struct nfs_direct_req *dreq,
 		data->cred = msg.rpc_cred;
 		data->args.fh = NFS_FH(inode);
 		data->args.context = ctx;
+		data->args.lock_context = dreq->l_ctx;
 		data->args.offset = pos;
 		data->args.pgbase = pgbase;
 		data->args.pages = data->pagevec;
@@ -416,24 +421,28 @@ static ssize_t nfs_direct_read_schedule_iovec(struct nfs_direct_req *dreq,
 static ssize_t nfs_direct_read(struct kiocb *iocb, const struct iovec *iov,
 			       unsigned long nr_segs, loff_t pos)
 {
-	ssize_t result = 0;
+	ssize_t result = -ENOMEM;
 	struct inode *inode = iocb->ki_filp->f_mapping->host;
 	struct nfs_direct_req *dreq;
 
 	dreq = nfs_direct_req_alloc();
-	if (!dreq)
-		return -ENOMEM;
+	if (dreq == NULL)
+		goto out;
 
 	dreq->inode = inode;
 	dreq->ctx = get_nfs_open_context(nfs_file_open_context(iocb->ki_filp));
+	dreq->l_ctx = nfs_get_lock_context(dreq->ctx);
+	if (dreq->l_ctx == NULL)
+		goto out_release;
 	if (!is_sync_kiocb(iocb))
 		dreq->iocb = iocb;
 
 	result = nfs_direct_read_schedule_iovec(dreq, iov, nr_segs, pos);
 	if (!result)
 		result = nfs_direct_wait(dreq);
+out_release:
 	nfs_direct_req_release(dreq);
-
+out:
 	return result;
 }
 
@@ -574,6 +583,7 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq)
 	data->args.offset = 0;
 	data->args.count = 0;
 	data->args.context = dreq->ctx;
+	data->args.lock_context = dreq->l_ctx;
 	data->res.count = 0;
 	data->res.fattr = &data->fattr;
 	data->res.verf = &data->verf;
@@ -761,6 +771,7 @@ static ssize_t nfs_direct_write_schedule_segment(struct nfs_direct_req *dreq,
 		data->cred = msg.rpc_cred;
 		data->args.fh = NFS_FH(inode);
 		data->args.context = ctx;
+		data->args.lock_context = dreq->l_ctx;
 		data->args.offset = pos;
 		data->args.pgbase = pgbase;
 		data->args.pages = data->pagevec;
@@ -845,7 +856,7 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
 				unsigned long nr_segs, loff_t pos,
 				size_t count)
 {
-	ssize_t result = 0;
+	ssize_t result = -ENOMEM;
 	struct inode *inode = iocb->ki_filp->f_mapping->host;
 	struct nfs_direct_req *dreq;
 	size_t wsize = NFS_SERVER(inode)->wsize;
@@ -853,7 +864,7 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
 
 	dreq = nfs_direct_req_alloc();
 	if (!dreq)
-		return -ENOMEM;
+		goto out;
 	nfs_alloc_commit_data(dreq);
 
 	if (dreq->commit_data == NULL || count < wsize)
@@ -861,14 +872,18 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
 
 	dreq->inode = inode;
 	dreq->ctx = get_nfs_open_context(nfs_file_open_context(iocb->ki_filp));
+	dreq->l_ctx = nfs_get_lock_context(dreq->ctx);
+	if (dreq->l_ctx != NULL)
+		goto out_release;
 	if (!is_sync_kiocb(iocb))
 		dreq->iocb = iocb;
 
 	result = nfs_direct_write_schedule_iovec(dreq, iov, nr_segs, pos, sync);
 	if (!result)
 		result = nfs_direct_wait(dreq);
+out_release:
 	nfs_direct_req_release(dreq);
-
+out:
 	return result;
 }
 
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index f036153d9f5..2d141a74ae8 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -203,37 +203,11 @@ static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin)
 }
 
 /*
- * Helper for nfs_file_flush() and nfs_file_fsync()
- *
- * Notice that it clears the NFS_CONTEXT_ERROR_WRITE before synching to
- * disk, but it retrieves and clears ctx->error after synching, despite
- * the two being set at the same time in nfs_context_set_write_error().
- * This is because the former is used to notify the _next_ call to
- * nfs_file_write() that a write error occured, and hence cause it to
- * fall back to doing a synchronous write.
- */
-static int nfs_do_fsync(struct nfs_open_context *ctx, struct inode *inode)
-{
-	int have_error, status;
-	int ret = 0;
-
-	have_error = test_and_clear_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
-	status = nfs_wb_all(inode);
-	have_error |= test_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
-	if (have_error)
-		ret = xchg(&ctx->error, 0);
-	if (!ret)
-		ret = status;
-	return ret;
-}
-
-/*
  * Flush all dirty pages, and check for write errors.
  */
 static int
 nfs_file_flush(struct file *file, fl_owner_t id)
 {
-	struct nfs_open_context *ctx = nfs_file_open_context(file);
 	struct dentry	*dentry = file->f_path.dentry;
 	struct inode	*inode = dentry->d_inode;
 
@@ -246,7 +220,7 @@ nfs_file_flush(struct file *file, fl_owner_t id)
 		return 0;
 
 	/* Flush writes to the server and return any errors */
-	return nfs_do_fsync(ctx, inode);
+	return vfs_fsync(file, 0);
 }
 
 static ssize_t
@@ -321,6 +295,13 @@ nfs_file_mmap(struct file * file, struct vm_area_struct * vma)
  * Flush any dirty pages for this process, and check for write errors.
  * The return status from this call provides a reliable indication of
  * whether any write errors occurred for this process.
+ *
+ * Notice that it clears the NFS_CONTEXT_ERROR_WRITE before synching to
+ * disk, but it retrieves and clears ctx->error after synching, despite
+ * the two being set at the same time in nfs_context_set_write_error().
+ * This is because the former is used to notify the _next_ call to
+ * nfs_file_write() that a write error occured, and hence cause it to
+ * fall back to doing a synchronous write.
  */
 static int
 nfs_file_fsync(struct file *file, int datasync)
@@ -328,13 +309,23 @@ nfs_file_fsync(struct file *file, int datasync)
 	struct dentry *dentry = file->f_path.dentry;
 	struct nfs_open_context *ctx = nfs_file_open_context(file);
 	struct inode *inode = dentry->d_inode;
+	int have_error, status;
+	int ret = 0;
+
 
 	dprintk("NFS: fsync file(%s/%s) datasync %d\n",
 			dentry->d_parent->d_name.name, dentry->d_name.name,
 			datasync);
 
 	nfs_inc_stats(inode, NFSIOS_VFSFSYNC);
-	return nfs_do_fsync(ctx, inode);
+	have_error = test_and_clear_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
+	status = nfs_commit_inode(inode, FLUSH_SYNC);
+	have_error |= test_bit(NFS_CONTEXT_ERROR_WRITE, &ctx->flags);
+	if (have_error)
+		ret = xchg(&ctx->error, 0);
+	if (!ret)
+		ret = status;
+	return ret;
 }
 
 /*
@@ -648,7 +639,7 @@ static ssize_t nfs_file_write(struct kiocb *iocb, const struct iovec *iov,
 
 	/* Return error values for O_DSYNC and IS_SYNC() */
 	if (result >= 0 && nfs_need_sync_write(iocb->ki_filp, inode)) {
-		int err = nfs_do_fsync(nfs_file_open_context(iocb->ki_filp), inode);
+		int err = vfs_fsync(iocb->ki_filp, 0);
 		if (err < 0)
 			result = err;
 	}
@@ -684,7 +675,7 @@ static ssize_t nfs_file_splice_write(struct pipe_inode_info *pipe,
 		written = ret;
 
 	if (ret >= 0 && nfs_need_sync_write(filp, inode)) {
-		int err = nfs_do_fsync(nfs_file_open_context(filp), inode);
+		int err = vfs_fsync(filp, 0);
 		if (err < 0)
 			ret = err;
 	}
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 099b3518fee..581d8f081e6 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -413,10 +413,8 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr)
 		return 0;
 
 	/* Write all dirty data */
-	if (S_ISREG(inode->i_mode)) {
-		filemap_write_and_wait(inode->i_mapping);
+	if (S_ISREG(inode->i_mode))
 		nfs_wb_all(inode);
-	}
 
 	fattr = nfs_alloc_fattr();
 	if (fattr == NULL)
@@ -530,6 +528,68 @@ out:
 	return err;
 }
 
+static void nfs_init_lock_context(struct nfs_lock_context *l_ctx)
+{
+	atomic_set(&l_ctx->count, 1);
+	l_ctx->lockowner = current->files;
+	l_ctx->pid = current->tgid;
+	INIT_LIST_HEAD(&l_ctx->list);
+}
+
+static struct nfs_lock_context *__nfs_find_lock_context(struct nfs_open_context *ctx)
+{
+	struct nfs_lock_context *pos;
+
+	list_for_each_entry(pos, &ctx->lock_context.list, list) {
+		if (pos->lockowner != current->files)
+			continue;
+		if (pos->pid != current->tgid)
+			continue;
+		atomic_inc(&pos->count);
+		return pos;
+	}
+	return NULL;
+}
+
+struct nfs_lock_context *nfs_get_lock_context(struct nfs_open_context *ctx)
+{
+	struct nfs_lock_context *res, *new = NULL;
+	struct inode *inode = ctx->path.dentry->d_inode;
+
+	spin_lock(&inode->i_lock);
+	res = __nfs_find_lock_context(ctx);
+	if (res == NULL) {
+		spin_unlock(&inode->i_lock);
+		new = kmalloc(sizeof(*new), GFP_KERNEL);
+		if (new == NULL)
+			return NULL;
+		nfs_init_lock_context(new);
+		spin_lock(&inode->i_lock);
+		res = __nfs_find_lock_context(ctx);
+		if (res == NULL) {
+			list_add_tail(&new->list, &ctx->lock_context.list);
+			new->open_context = ctx;
+			res = new;
+			new = NULL;
+		}
+	}
+	spin_unlock(&inode->i_lock);
+	kfree(new);
+	return res;
+}
+
+void nfs_put_lock_context(struct nfs_lock_context *l_ctx)
+{
+	struct nfs_open_context *ctx = l_ctx->open_context;
+	struct inode *inode = ctx->path.dentry->d_inode;
+
+	if (!atomic_dec_and_lock(&l_ctx->count, &inode->i_lock))
+		return;
+	list_del(&l_ctx->list);
+	spin_unlock(&inode->i_lock);
+	kfree(l_ctx);
+}
+
 /**
  * nfs_close_context - Common close_context() routine NFSv2/v3
  * @ctx: pointer to context
@@ -566,11 +626,11 @@ static struct nfs_open_context *alloc_nfs_open_context(struct path *path, struct
 		path_get(&ctx->path);
 		ctx->cred = get_rpccred(cred);
 		ctx->state = NULL;
-		ctx->lockowner = current->files;
 		ctx->flags = 0;
 		ctx->error = 0;
 		ctx->dir_cookie = 0;
-		atomic_set(&ctx->count, 1);
+		nfs_init_lock_context(&ctx->lock_context);
+		ctx->lock_context.open_context = ctx;
 	}
 	return ctx;
 }
@@ -578,7 +638,7 @@ static struct nfs_open_context *alloc_nfs_open_context(struct path *path, struct
 struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx)
 {
 	if (ctx != NULL)
-		atomic_inc(&ctx->count);
+		atomic_inc(&ctx->lock_context.count);
 	return ctx;
 }
 
@@ -586,7 +646,7 @@ static void __put_nfs_open_context(struct nfs_open_context *ctx, int is_sync)
 {
 	struct inode *inode = ctx->path.dentry->d_inode;
 
-	if (!atomic_dec_and_lock(&ctx->count, &inode->i_lock))
+	if (!atomic_dec_and_lock(&ctx->lock_context.count, &inode->i_lock))
 		return;
 	list_del(&ctx->list);
 	spin_unlock(&inode->i_lock);
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index e70f44b9b3f..4c2150d8671 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -370,10 +370,9 @@ unsigned int nfs_page_array_len(unsigned int base, size_t len)
  * Helper for restarting RPC calls in the possible presence of NFSv4.1
  * sessions.
  */
-static inline void nfs_restart_rpc(struct rpc_task *task, const struct nfs_client *clp)
+static inline int nfs_restart_rpc(struct rpc_task *task, const struct nfs_client *clp)
 {
 	if (nfs4_has_session(clp))
-		rpc_restart_call_prepare(task);
-	else
-		rpc_restart_call(task);
+		return rpc_restart_call_prepare(task);
+	return rpc_restart_call(task);
 }
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index 81cf1425791..db8846a0e82 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -233,7 +233,7 @@ nfs_xdr_removeargs(struct rpc_rqst *req, __be32 *p, const struct nfs_removeargs
 static int
 nfs_xdr_readargs(struct rpc_rqst *req, __be32 *p, struct nfs_readargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 	u32 offset = (u32)args->offset;
 	u32 count = args->count;
@@ -393,8 +393,7 @@ nfs_xdr_symlinkargs(struct rpc_rqst *req, __be32 *p, struct nfs_symlinkargs *arg
 static int
 nfs_xdr_readdirargs(struct rpc_rqst *req, __be32 *p, struct nfs_readdirargs *args)
 {
-	struct rpc_task	*task = req->rq_task;
-	struct rpc_auth	*auth = task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 	u32 count = args->count;
 
@@ -575,7 +574,7 @@ nfs_xdr_diropres(struct rpc_rqst *req, __be32 *p, struct nfs_diropok *res)
 static int
 nfs_xdr_readlinkargs(struct rpc_rqst *req, __be32 *p, struct nfs_readlinkargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 
 	p = xdr_encode_fhandle(p, args->fh);
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index 75dcfc7da36..9769704f8ce 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -330,7 +330,7 @@ nfs3_xdr_accessargs(struct rpc_rqst *req, __be32 *p, struct nfs3_accessargs *arg
 static int
 nfs3_xdr_readargs(struct rpc_rqst *req, __be32 *p, struct nfs_readargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 	u32 count = args->count;
 
@@ -471,7 +471,7 @@ nfs3_xdr_linkargs(struct rpc_rqst *req, __be32 *p, struct nfs3_linkargs *args)
 static int
 nfs3_xdr_readdirargs(struct rpc_rqst *req, __be32 *p, struct nfs3_readdirargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 	u32 count = args->count;
 
@@ -675,7 +675,7 @@ static int
 nfs3_xdr_getaclargs(struct rpc_rqst *req, __be32 *p,
 		    struct nfs3_getaclargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 
 	p = xdr_encode_fhandle(p, args->fh);
@@ -802,7 +802,7 @@ nfs3_xdr_accessres(struct rpc_rqst *req, __be32 *p, struct nfs3_accessres *res)
 static int
 nfs3_xdr_readlinkargs(struct rpc_rqst *req, __be32 *p, struct nfs3_readlinkargs *args)
 {
-	struct rpc_auth	*auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth	*auth = req->rq_cred->cr_auth;
 	unsigned int replen;
 
 	p = xdr_encode_fhandle(p, args->fh);
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index c538c6106e1..311e15cc8af 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -45,10 +45,29 @@ enum nfs4_client_state {
 	NFS4CLNT_RECLAIM_NOGRACE,
 	NFS4CLNT_DELEGRETURN,
 	NFS4CLNT_SESSION_RESET,
-	NFS4CLNT_SESSION_DRAINING,
 	NFS4CLNT_RECALL_SLOT,
 };
 
+enum nfs4_session_state {
+	NFS4_SESSION_INITING,
+	NFS4_SESSION_DRAINING,
+};
+
+struct nfs4_minor_version_ops {
+	u32	minor_version;
+
+	int	(*call_sync)(struct nfs_server *server,
+			struct rpc_message *msg,
+			struct nfs4_sequence_args *args,
+			struct nfs4_sequence_res *res,
+			int cache_reply);
+	int	(*validate_stateid)(struct nfs_delegation *,
+			const nfs4_stateid *);
+	const struct nfs4_state_recovery_ops *reboot_recovery_ops;
+	const struct nfs4_state_recovery_ops *nograce_recovery_ops;
+	const struct nfs4_state_maintenance_ops *state_renewal_ops;
+};
+
 /*
  * struct rpc_sequence ensures that RPC calls are sent in the exact
  * order that they appear on the list.
@@ -89,7 +108,6 @@ struct nfs_unique_id {
  */
 struct nfs4_state_owner {
 	struct nfs_unique_id so_owner_id;
-	struct nfs_client    *so_client;
 	struct nfs_server    *so_server;
 	struct rb_node	     so_client_node;
 
@@ -99,7 +117,6 @@ struct nfs4_state_owner {
 	atomic_t	     so_count;
 	unsigned long	     so_flags;
 	struct list_head     so_states;
-	struct list_head     so_delegations;
 	struct nfs_seqid_counter so_seqid;
 	struct rpc_sequence  so_sequence;
 };
@@ -125,10 +142,20 @@ enum {
  * LOCK: one nfs4_state (LOCK) to hold the lock stateid nfs4_state(OPEN)
  */
 
+struct nfs4_lock_owner {
+	unsigned int lo_type;
+#define NFS4_ANY_LOCK_TYPE	(0U)
+#define NFS4_FLOCK_LOCK_TYPE	(1U << 0)
+#define NFS4_POSIX_LOCK_TYPE	(1U << 1)
+	union {
+		fl_owner_t posix_owner;
+		pid_t flock_owner;
+	} lo_u;
+};
+
 struct nfs4_lock_state {
 	struct list_head	ls_locks;	/* Other lock stateids */
 	struct nfs4_state *	ls_state;	/* Pointer to open state */
-	fl_owner_t		ls_owner;	/* POSIX lock owner */
 #define NFS_LOCK_INITIALIZED 1
 	int			ls_flags;
 	struct nfs_seqid_counter	ls_seqid;
@@ -136,6 +163,7 @@ struct nfs4_lock_state {
 	struct nfs_unique_id	ls_id;
 	nfs4_stateid		ls_stateid;
 	atomic_t		ls_count;
+	struct nfs4_lock_owner	ls_owner;
 };
 
 /* bits for nfs4_state->flags */
@@ -219,11 +247,15 @@ extern int nfs4_open_revalidate(struct inode *, struct dentry *, int, struct nam
 extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle);
 extern int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name,
 		struct nfs4_fs_locations *fs_locations, struct page *page);
+extern void nfs4_release_lockowner(const struct nfs4_lock_state *);
 
-extern struct nfs4_state_recovery_ops *nfs4_reboot_recovery_ops[];
-extern struct nfs4_state_recovery_ops *nfs4_nograce_recovery_ops[];
 #if defined(CONFIG_NFS_V4_1)
-extern int nfs4_setup_sequence(struct nfs_client *clp,
+static inline struct nfs4_session *nfs4_get_session(const struct nfs_server *server)
+{
+	return server->nfs_client->cl_session;
+}
+
+extern int nfs4_setup_sequence(const struct nfs_server *server,
 		struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
 		int cache_reply, struct rpc_task *task);
 extern void nfs4_destroy_session(struct nfs4_session *session);
@@ -234,7 +266,12 @@ extern int nfs4_init_session(struct nfs_server *server);
 extern int nfs4_proc_get_lease_time(struct nfs_client *clp,
 		struct nfs_fsinfo *fsinfo);
 #else /* CONFIG_NFS_v4_1 */
-static inline int nfs4_setup_sequence(struct nfs_client *clp,
+static inline struct nfs4_session *nfs4_get_session(const struct nfs_server *server)
+{
+	return NULL;
+}
+
+static inline int nfs4_setup_sequence(const struct nfs_server *server,
 		struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
 		int cache_reply, struct rpc_task *task)
 {
@@ -247,7 +284,7 @@ static inline int nfs4_init_session(struct nfs_server *server)
 }
 #endif /* CONFIG_NFS_V4_1 */
 
-extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
+extern const struct nfs4_minor_version_ops *nfs_v4_minor_ops[];
 
 extern const u32 nfs4_fattr_bitmap[2];
 extern const u32 nfs4_statfs_bitmap[2];
@@ -284,7 +321,7 @@ extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags)
 extern void nfs41_handle_recall_slot(struct nfs_client *clp);
 extern void nfs4_put_lock_state(struct nfs4_lock_state *lsp);
 extern int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl);
-extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t);
+extern void nfs4_copy_stateid(nfs4_stateid *, struct nfs4_state *, fl_owner_t, pid_t);
 
 extern struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter, gfp_t gfp_mask);
 extern int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 70015dd60a9..7ffbb98ddec 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -303,15 +303,19 @@ do_state_recovery:
 }
 
 
-static void renew_lease(const struct nfs_server *server, unsigned long timestamp)
+static void do_renew_lease(struct nfs_client *clp, unsigned long timestamp)
 {
-	struct nfs_client *clp = server->nfs_client;
 	spin_lock(&clp->cl_lock);
 	if (time_before(clp->cl_last_renewal,timestamp))
 		clp->cl_last_renewal = timestamp;
 	spin_unlock(&clp->cl_lock);
 }
 
+static void renew_lease(const struct nfs_server *server, unsigned long timestamp)
+{
+	do_renew_lease(server->nfs_client, timestamp);
+}
+
 #if defined(CONFIG_NFS_V4_1)
 
 /*
@@ -356,7 +360,7 @@ static void nfs41_check_drain_session_complete(struct nfs4_session *ses)
 {
 	struct rpc_task *task;
 
-	if (!test_bit(NFS4CLNT_SESSION_DRAINING, &ses->clp->cl_state)) {
+	if (!test_bit(NFS4_SESSION_DRAINING, &ses->session_state)) {
 		task = rpc_wake_up_next(&ses->fc_slot_table.slot_tbl_waitq);
 		if (task)
 			rpc_task_set_priority(task, RPC_PRIORITY_PRIVILEGED);
@@ -370,12 +374,11 @@ static void nfs41_check_drain_session_complete(struct nfs4_session *ses)
 	complete(&ses->complete);
 }
 
-static void nfs41_sequence_free_slot(const struct nfs_client *clp,
-			      struct nfs4_sequence_res *res)
+static void nfs41_sequence_free_slot(struct nfs4_sequence_res *res)
 {
 	struct nfs4_slot_table *tbl;
 
-	tbl = &clp->cl_session->fc_slot_table;
+	tbl = &res->sr_session->fc_slot_table;
 	if (res->sr_slotid == NFS4_MAX_SLOT_TABLE) {
 		/* just wake up the next guy waiting since
 		 * we may have not consumed a slot after all */
@@ -385,18 +388,17 @@ static void nfs41_sequence_free_slot(const struct nfs_client *clp,
 
 	spin_lock(&tbl->slot_tbl_lock);
 	nfs4_free_slot(tbl, res->sr_slotid);
-	nfs41_check_drain_session_complete(clp->cl_session);
+	nfs41_check_drain_session_complete(res->sr_session);
 	spin_unlock(&tbl->slot_tbl_lock);
 	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
 }
 
-static void nfs41_sequence_done(struct nfs_client *clp,
-				struct nfs4_sequence_res *res,
-				int rpc_status)
+static int nfs41_sequence_done(struct rpc_task *task, struct nfs4_sequence_res *res)
 {
 	unsigned long timestamp;
 	struct nfs4_slot_table *tbl;
 	struct nfs4_slot *slot;
+	struct nfs_client *clp;
 
 	/*
 	 * sr_status remains 1 if an RPC level error occurred. The server
@@ -411,25 +413,51 @@ static void nfs41_sequence_done(struct nfs_client *clp,
 	if (res->sr_slotid == NFS4_MAX_SLOT_TABLE)
 		goto out;
 
+	tbl = &res->sr_session->fc_slot_table;
+	slot = tbl->slots + res->sr_slotid;
+
 	/* Check the SEQUENCE operation status */
-	if (res->sr_status == 0) {
-		tbl = &clp->cl_session->fc_slot_table;
-		slot = tbl->slots + res->sr_slotid;
+	switch (res->sr_status) {
+	case 0:
 		/* Update the slot's sequence and clientid lease timer */
 		++slot->seq_nr;
 		timestamp = res->sr_renewal_time;
-		spin_lock(&clp->cl_lock);
-		if (time_before(clp->cl_last_renewal, timestamp))
-			clp->cl_last_renewal = timestamp;
-		spin_unlock(&clp->cl_lock);
+		clp = res->sr_session->clp;
+		do_renew_lease(clp, timestamp);
 		/* Check sequence flags */
 		if (atomic_read(&clp->cl_count) > 1)
 			nfs41_handle_sequence_flag_errors(clp, res->sr_status_flags);
+		break;
+	case -NFS4ERR_DELAY:
+		/* The server detected a resend of the RPC call and
+		 * returned NFS4ERR_DELAY as per Section 2.10.6.2
+		 * of RFC5661.
+		 */
+		dprintk("%s: slot=%d seq=%d: Operation in progress\n",
+				__func__, res->sr_slotid, slot->seq_nr);
+		goto out_retry;
+	default:
+		/* Just update the slot sequence no. */
+		++slot->seq_nr;
 	}
 out:
 	/* The session may be reset by one of the error handlers. */
 	dprintk("%s: Error %d free the slot \n", __func__, res->sr_status);
-	nfs41_sequence_free_slot(clp, res);
+	nfs41_sequence_free_slot(res);
+	return 1;
+out_retry:
+	if (!rpc_restart_call(task))
+		goto out;
+	rpc_delay(task, NFS4_POLL_RETRY_MAX);
+	return 0;
+}
+
+static int nfs4_sequence_done(struct rpc_task *task,
+			       struct nfs4_sequence_res *res)
+{
+	if (res->sr_session == NULL)
+		return 1;
+	return nfs41_sequence_done(task, res);
 }
 
 /*
@@ -480,12 +508,11 @@ static int nfs41_setup_sequence(struct nfs4_session *session,
 	if (res->sr_slotid != NFS4_MAX_SLOT_TABLE)
 		return 0;
 
-	memset(res, 0, sizeof(*res));
 	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
 	tbl = &session->fc_slot_table;
 
 	spin_lock(&tbl->slot_tbl_lock);
-	if (test_bit(NFS4CLNT_SESSION_DRAINING, &session->clp->cl_state) &&
+	if (test_bit(NFS4_SESSION_DRAINING, &session->session_state) &&
 	    !rpc_task_has_priority(task, RPC_PRIORITY_PRIVILEGED)) {
 		/*
 		 * The state manager will wait until the slot table is empty.
@@ -525,6 +552,7 @@ static int nfs41_setup_sequence(struct nfs4_session *session,
 	res->sr_session = session;
 	res->sr_slotid = slotid;
 	res->sr_renewal_time = jiffies;
+	res->sr_status_flags = 0;
 	/*
 	 * sr_status is only set in decode_sequence, and so will remain
 	 * set to 1 if an rpc level failure occurs.
@@ -533,33 +561,33 @@ static int nfs41_setup_sequence(struct nfs4_session *session,
 	return 0;
 }
 
-int nfs4_setup_sequence(struct nfs_client *clp,
+int nfs4_setup_sequence(const struct nfs_server *server,
 			struct nfs4_sequence_args *args,
 			struct nfs4_sequence_res *res,
 			int cache_reply,
 			struct rpc_task *task)
 {
+	struct nfs4_session *session = nfs4_get_session(server);
 	int ret = 0;
 
+	if (session == NULL) {
+		args->sa_session = NULL;
+		res->sr_session = NULL;
+		goto out;
+	}
+
 	dprintk("--> %s clp %p session %p sr_slotid %d\n",
-		__func__, clp, clp->cl_session, res->sr_slotid);
+		__func__, session->clp, session, res->sr_slotid);
 
-	if (!nfs4_has_session(clp))
-		goto out;
-	ret = nfs41_setup_sequence(clp->cl_session, args, res, cache_reply,
+	ret = nfs41_setup_sequence(session, args, res, cache_reply,
 				   task);
-	if (ret && ret != -EAGAIN) {
-		/* terminate rpc task */
-		task->tk_status = ret;
-		task->tk_action = NULL;
-	}
 out:
 	dprintk("<-- %s status=%d\n", __func__, ret);
 	return ret;
 }
 
 struct nfs41_call_sync_data {
-	struct nfs_client *clp;
+	const struct nfs_server *seq_server;
 	struct nfs4_sequence_args *seq_args;
 	struct nfs4_sequence_res *seq_res;
 	int cache_reply;
@@ -569,9 +597,9 @@ static void nfs41_call_sync_prepare(struct rpc_task *task, void *calldata)
 {
 	struct nfs41_call_sync_data *data = calldata;
 
-	dprintk("--> %s data->clp->cl_session %p\n", __func__,
-		data->clp->cl_session);
-	if (nfs4_setup_sequence(data->clp, data->seq_args,
+	dprintk("--> %s data->seq_server %p\n", __func__, data->seq_server);
+
+	if (nfs4_setup_sequence(data->seq_server, data->seq_args,
 				data->seq_res, data->cache_reply, task))
 		return;
 	rpc_call_start(task);
@@ -587,7 +615,7 @@ static void nfs41_call_sync_done(struct rpc_task *task, void *calldata)
 {
 	struct nfs41_call_sync_data *data = calldata;
 
-	nfs41_sequence_done(data->clp, data->seq_res, task->tk_status);
+	nfs41_sequence_done(task, data->seq_res);
 }
 
 struct rpc_call_ops nfs41_call_sync_ops = {
@@ -600,8 +628,7 @@ struct rpc_call_ops nfs41_call_priv_sync_ops = {
 	.rpc_call_done = nfs41_call_sync_done,
 };
 
-static int nfs4_call_sync_sequence(struct nfs_client *clp,
-				   struct rpc_clnt *clnt,
+static int nfs4_call_sync_sequence(struct nfs_server *server,
 				   struct rpc_message *msg,
 				   struct nfs4_sequence_args *args,
 				   struct nfs4_sequence_res *res,
@@ -611,13 +638,13 @@ static int nfs4_call_sync_sequence(struct nfs_client *clp,
 	int ret;
 	struct rpc_task *task;
 	struct nfs41_call_sync_data data = {
-		.clp = clp,
+		.seq_server = server,
 		.seq_args = args,
 		.seq_res = res,
 		.cache_reply = cache_reply,
 	};
 	struct rpc_task_setup task_setup = {
-		.rpc_client = clnt,
+		.rpc_client = server->client,
 		.rpc_message = msg,
 		.callback_ops = &nfs41_call_sync_ops,
 		.callback_data = &data
@@ -642,10 +669,15 @@ int _nfs4_call_sync_session(struct nfs_server *server,
 			    struct nfs4_sequence_res *res,
 			    int cache_reply)
 {
-	return nfs4_call_sync_sequence(server->nfs_client, server->client,
-				       msg, args, res, cache_reply, 0);
+	return nfs4_call_sync_sequence(server, msg, args, res, cache_reply, 0);
 }
 
+#else
+static int nfs4_sequence_done(struct rpc_task *task,
+			       struct nfs4_sequence_res *res)
+{
+	return 1;
+}
 #endif /* CONFIG_NFS_V4_1 */
 
 int _nfs4_call_sync(struct nfs_server *server,
@@ -659,18 +691,9 @@ int _nfs4_call_sync(struct nfs_server *server,
 }
 
 #define nfs4_call_sync(server, msg, args, res, cache_reply) \
-	(server)->nfs_client->cl_call_sync((server), (msg), &(args)->seq_args, \
+	(server)->nfs_client->cl_mvops->call_sync((server), (msg), &(args)->seq_args, \
 			&(res)->seq_res, (cache_reply))
 
-static void nfs4_sequence_done(const struct nfs_server *server,
-			       struct nfs4_sequence_res *res, int rpc_status)
-{
-#ifdef CONFIG_NFS_V4_1
-	if (nfs4_has_session(server->nfs_client))
-		nfs41_sequence_done(server->nfs_client, res, rpc_status);
-#endif /* CONFIG_NFS_V4_1 */
-}
-
 static void update_changeattr(struct inode *dir, struct nfs4_change_info *cinfo)
 {
 	struct nfs_inode *nfsi = NFS_I(dir);
@@ -745,19 +768,14 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct path *path,
 	p->o_arg.server = server;
 	p->o_arg.bitmask = server->attr_bitmask;
 	p->o_arg.claim = NFS4_OPEN_CLAIM_NULL;
-	if (flags & O_EXCL) {
-		if (nfs4_has_persistent_session(server->nfs_client)) {
-			/* GUARDED */
-			p->o_arg.u.attrs = &p->attrs;
-			memcpy(&p->attrs, attrs, sizeof(p->attrs));
-		} else { /* EXCLUSIVE4_1 */
-			u32 *s = (u32 *) p->o_arg.u.verifier.data;
-			s[0] = jiffies;
-			s[1] = current->pid;
-		}
-	} else if (flags & O_CREAT) {
+	if (flags & O_CREAT) {
+		u32 *s;
+
 		p->o_arg.u.attrs = &p->attrs;
 		memcpy(&p->attrs, attrs, sizeof(p->attrs));
+		s = (u32 *) p->o_arg.u.verifier.data;
+		s[0] = jiffies;
+		s[1] = current->pid;
 	}
 	p->c_arg.fh = &p->o_res.fh;
 	p->c_arg.stateid = &p->o_res.stateid;
@@ -1255,8 +1273,6 @@ static void nfs4_open_confirm_done(struct rpc_task *task, void *calldata)
 	struct nfs4_opendata *data = calldata;
 
 	data->rpc_status = task->tk_status;
-	if (RPC_ASSASSINATED(task))
-		return;
 	if (data->rpc_status == 0) {
 		memcpy(data->o_res.stateid.data, data->c_res.stateid.data,
 				sizeof(data->o_res.stateid.data));
@@ -1356,13 +1372,13 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
 	}
 	/* Update sequence id. */
 	data->o_arg.id = sp->so_owner_id.id;
-	data->o_arg.clientid = sp->so_client->cl_clientid;
+	data->o_arg.clientid = sp->so_server->nfs_client->cl_clientid;
 	if (data->o_arg.claim == NFS4_OPEN_CLAIM_PREVIOUS) {
 		task->tk_msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_NOATTR];
 		nfs_copy_fh(&data->o_res.fh, data->o_arg.fh);
 	}
 	data->timestamp = jiffies;
-	if (nfs4_setup_sequence(data->o_arg.server->nfs_client,
+	if (nfs4_setup_sequence(data->o_arg.server,
 				&data->o_arg.seq_args,
 				&data->o_res.seq_res, 1, task))
 		return;
@@ -1385,11 +1401,9 @@ static void nfs4_open_done(struct rpc_task *task, void *calldata)
 
 	data->rpc_status = task->tk_status;
 
-	nfs4_sequence_done(data->o_arg.server, &data->o_res.seq_res,
-			task->tk_status);
-
-	if (RPC_ASSASSINATED(task))
+	if (!nfs4_sequence_done(task, &data->o_res.seq_res))
 		return;
+
 	if (task->tk_status == 0) {
 		switch (data->o_res.f_attr->mode & S_IFMT) {
 			case S_IFREG:
@@ -1773,7 +1787,7 @@ static int _nfs4_do_setattr(struct inode *inode, struct rpc_cred *cred,
 	if (nfs4_copy_delegation_stateid(&arg.stateid, inode)) {
 		/* Use that stateid */
 	} else if (state != NULL) {
-		nfs4_copy_stateid(&arg.stateid, state, current->files);
+		nfs4_copy_stateid(&arg.stateid, state, current->files, current->tgid);
 	} else
 		memcpy(&arg.stateid, &zero_stateid, sizeof(arg.stateid));
 
@@ -1838,8 +1852,7 @@ static void nfs4_close_done(struct rpc_task *task, void *data)
 	struct nfs4_state *state = calldata->state;
 	struct nfs_server *server = NFS_SERVER(calldata->inode);
 
-	nfs4_sequence_done(server, &calldata->res.seq_res, task->tk_status);
-	if (RPC_ASSASSINATED(task))
+	if (!nfs4_sequence_done(task, &calldata->res.seq_res))
 		return;
         /* hmm. we are done with the inode, and in the process of freeing
 	 * the state_owner. we keep this around to process errors
@@ -1903,7 +1916,7 @@ static void nfs4_close_prepare(struct rpc_task *task, void *data)
 
 	nfs_fattr_init(calldata->res.fattr);
 	calldata->timestamp = jiffies;
-	if (nfs4_setup_sequence((NFS_SERVER(calldata->inode))->nfs_client,
+	if (nfs4_setup_sequence(NFS_SERVER(calldata->inode),
 				&calldata->arg.seq_args, &calldata->res.seq_res,
 				1, task))
 		return;
@@ -2648,7 +2661,8 @@ static int nfs4_proc_unlink_done(struct rpc_task *task, struct inode *dir)
 {
 	struct nfs_removeres *res = task->tk_msg.rpc_resp;
 
-	nfs4_sequence_done(res->server, &res->seq_res, task->tk_status);
+	if (!nfs4_sequence_done(task, &res->seq_res))
+		return 0;
 	if (nfs4_async_handle_error(task, res->server, NULL) == -EAGAIN)
 		return 0;
 	update_changeattr(dir, &res->cinfo);
@@ -3093,7 +3107,8 @@ static int nfs4_read_done(struct rpc_task *task, struct nfs_read_data *data)
 
 	dprintk("--> %s\n", __func__);
 
-	nfs4_sequence_done(server, &data->res.seq_res, task->tk_status);
+	if (!nfs4_sequence_done(task, &data->res.seq_res))
+		return -EAGAIN;
 
 	if (nfs4_async_handle_error(task, server, data->args.context->state) == -EAGAIN) {
 		nfs_restart_rpc(task, server->nfs_client);
@@ -3116,8 +3131,8 @@ static int nfs4_write_done(struct rpc_task *task, struct nfs_write_data *data)
 {
 	struct inode *inode = data->inode;
 	
-	nfs4_sequence_done(NFS_SERVER(inode), &data->res.seq_res,
-			   task->tk_status);
+	if (!nfs4_sequence_done(task, &data->res.seq_res))
+		return -EAGAIN;
 
 	if (nfs4_async_handle_error(task, NFS_SERVER(inode), data->args.context->state) == -EAGAIN) {
 		nfs_restart_rpc(task, NFS_SERVER(inode)->nfs_client);
@@ -3145,8 +3160,9 @@ static int nfs4_commit_done(struct rpc_task *task, struct nfs_write_data *data)
 {
 	struct inode *inode = data->inode;
 	
-	nfs4_sequence_done(NFS_SERVER(inode), &data->res.seq_res,
-			   task->tk_status);
+	if (!nfs4_sequence_done(task, &data->res.seq_res))
+		return -EAGAIN;
+
 	if (nfs4_async_handle_error(task, NFS_SERVER(inode), NULL) == -EAGAIN) {
 		nfs_restart_rpc(task, NFS_SERVER(inode)->nfs_client);
 		return -EAGAIN;
@@ -3196,10 +3212,7 @@ static void nfs4_renew_done(struct rpc_task *task, void *calldata)
 			nfs4_schedule_state_recovery(clp);
 		return;
 	}
-	spin_lock(&clp->cl_lock);
-	if (time_before(clp->cl_last_renewal,timestamp))
-		clp->cl_last_renewal = timestamp;
-	spin_unlock(&clp->cl_lock);
+	do_renew_lease(clp, timestamp);
 }
 
 static const struct rpc_call_ops nfs4_renew_ops = {
@@ -3240,10 +3253,7 @@ int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
 	status = rpc_call_sync(clp->cl_rpcclient, &msg, 0);
 	if (status < 0)
 		return status;
-	spin_lock(&clp->cl_lock);
-	if (time_before(clp->cl_last_renewal,now))
-		clp->cl_last_renewal = now;
-	spin_unlock(&clp->cl_lock);
+	do_renew_lease(clp, now);
 	return 0;
 }
 
@@ -3464,9 +3474,11 @@ static int nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t buflen
 }
 
 static int
-_nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs_client *clp, struct nfs4_state *state)
+nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs4_state *state)
 {
-	if (!clp || task->tk_status >= 0)
+	struct nfs_client *clp = server->nfs_client;
+
+	if (task->tk_status >= 0)
 		return 0;
 	switch(task->tk_status) {
 		case -NFS4ERR_ADMIN_REVOKED:
@@ -3498,8 +3510,7 @@ _nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server,
 			return -EAGAIN;
 #endif /* CONFIG_NFS_V4_1 */
 		case -NFS4ERR_DELAY:
-			if (server)
-				nfs_inc_server_stats(server, NFSIOS_DELAY);
+			nfs_inc_server_stats(server, NFSIOS_DELAY);
 		case -NFS4ERR_GRACE:
 		case -EKEYEXPIRED:
 			rpc_delay(task, NFS4_POLL_RETRY_MAX);
@@ -3520,12 +3531,6 @@ do_state_recovery:
 	return -EAGAIN;
 }
 
-static int
-nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, struct nfs4_state *state)
-{
-	return _nfs4_async_handle_error(task, server, server->nfs_client, state);
-}
-
 int nfs4_proc_setclientid(struct nfs_client *clp, u32 program,
 		unsigned short port, struct rpc_cred *cred,
 		struct nfs4_setclientid_res *res)
@@ -3641,8 +3646,8 @@ static void nfs4_delegreturn_done(struct rpc_task *task, void *calldata)
 {
 	struct nfs4_delegreturndata *data = calldata;
 
-	nfs4_sequence_done(data->res.server, &data->res.seq_res,
-			task->tk_status);
+	if (!nfs4_sequence_done(task, &data->res.seq_res))
+		return;
 
 	switch (task->tk_status) {
 	case -NFS4ERR_STALE_STATEID:
@@ -3672,7 +3677,7 @@ static void nfs4_delegreturn_prepare(struct rpc_task *task, void *data)
 
 	d_data = (struct nfs4_delegreturndata *)data;
 
-	if (nfs4_setup_sequence(d_data->res.server->nfs_client,
+	if (nfs4_setup_sequence(d_data->res.server,
 				&d_data->args.seq_args,
 				&d_data->res.seq_res, 1, task))
 		return;
@@ -3892,9 +3897,7 @@ static void nfs4_locku_done(struct rpc_task *task, void *data)
 {
 	struct nfs4_unlockdata *calldata = data;
 
-	nfs4_sequence_done(calldata->server, &calldata->res.seq_res,
-			   task->tk_status);
-	if (RPC_ASSASSINATED(task))
+	if (!nfs4_sequence_done(task, &calldata->res.seq_res))
 		return;
 	switch (task->tk_status) {
 		case 0:
@@ -3927,7 +3930,7 @@ static void nfs4_locku_prepare(struct rpc_task *task, void *data)
 		return;
 	}
 	calldata->timestamp = jiffies;
-	if (nfs4_setup_sequence(calldata->server->nfs_client,
+	if (nfs4_setup_sequence(calldata->server,
 				&calldata->arg.seq_args,
 				&calldata->res.seq_res, 1, task))
 		return;
@@ -4082,7 +4085,8 @@ static void nfs4_lock_prepare(struct rpc_task *task, void *calldata)
 	} else
 		data->arg.new_lock_owner = 0;
 	data->timestamp = jiffies;
-	if (nfs4_setup_sequence(data->server->nfs_client, &data->arg.seq_args,
+	if (nfs4_setup_sequence(data->server,
+				&data->arg.seq_args,
 				&data->res.seq_res, 1, task))
 		return;
 	rpc_call_start(task);
@@ -4101,12 +4105,10 @@ static void nfs4_lock_done(struct rpc_task *task, void *calldata)
 
 	dprintk("%s: begin!\n", __func__);
 
-	nfs4_sequence_done(data->server, &data->res.seq_res,
-			task->tk_status);
+	if (!nfs4_sequence_done(task, &data->res.seq_res))
+		return;
 
 	data->rpc_status = task->tk_status;
-	if (RPC_ASSASSINATED(task))
-		goto out;
 	if (data->arg.new_lock_owner != 0) {
 		if (data->rpc_status == 0)
 			nfs_confirm_seqid(&data->lsp->ls_seqid, 0);
@@ -4424,6 +4426,34 @@ out:
 	return err;
 }
 
+static void nfs4_release_lockowner_release(void *calldata)
+{
+	kfree(calldata);
+}
+
+const struct rpc_call_ops nfs4_release_lockowner_ops = {
+	.rpc_release = nfs4_release_lockowner_release,
+};
+
+void nfs4_release_lockowner(const struct nfs4_lock_state *lsp)
+{
+	struct nfs_server *server = lsp->ls_state->owner->so_server;
+	struct nfs_release_lockowner_args *args;
+	struct rpc_message msg = {
+		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RELEASE_LOCKOWNER],
+	};
+
+	if (server->nfs_client->cl_mvops->minor_version != 0)
+		return;
+	args = kmalloc(sizeof(*args), GFP_NOFS);
+	if (!args)
+		return;
+	args->lock_owner.clientid = server->nfs_client->cl_clientid;
+	args->lock_owner.id = lsp->ls_id.id;
+	msg.rpc_argp = args;
+	rpc_call_async(server->client, &msg, 0, &nfs4_release_lockowner_ops, args);
+}
+
 #define XATTR_NAME_NFSV4_ACL "system.nfs4_acl"
 
 int nfs4_setxattr(struct dentry *dentry, const char *key, const void *buf,
@@ -4611,7 +4641,8 @@ static void nfs4_get_lease_time_done(struct rpc_task *task, void *calldata)
 			(struct nfs4_get_lease_time_data *)calldata;
 
 	dprintk("--> %s\n", __func__);
-	nfs41_sequence_done(data->clp, &data->res->lr_seq_res, task->tk_status);
+	if (!nfs41_sequence_done(task, &data->res->lr_seq_res))
+		return;
 	switch (task->tk_status) {
 	case -NFS4ERR_DELAY:
 	case -NFS4ERR_GRACE:
@@ -4805,13 +4836,6 @@ struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp)
 	if (!session)
 		return NULL;
 
-	/*
-	 * The create session reply races with the server back
-	 * channel probe. Mark the client NFS_CS_SESSION_INITING
-	 * so that the client back channel can find the
-	 * nfs_client struct
-	 */
-	clp->cl_cons_state = NFS_CS_SESSION_INITING;
 	init_completion(&session->complete);
 
 	tbl = &session->fc_slot_table;
@@ -4824,6 +4848,8 @@ struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp)
 	spin_lock_init(&tbl->slot_tbl_lock);
 	rpc_init_wait_queue(&tbl->slot_tbl_waitq, "BackChannel Slot table");
 
+	session->session_state = 1<<NFS4_SESSION_INITING;
+
 	session->clp = clp;
 	return session;
 }
@@ -5040,6 +5066,10 @@ int nfs4_init_session(struct nfs_server *server)
 	if (!nfs4_has_session(clp))
 		return 0;
 
+	session = clp->cl_session;
+	if (!test_and_clear_bit(NFS4_SESSION_INITING, &session->session_state))
+		return 0;
+
 	rsize = server->rsize;
 	if (rsize == 0)
 		rsize = NFS_MAX_FILE_IO_SIZE;
@@ -5047,7 +5077,6 @@ int nfs4_init_session(struct nfs_server *server)
 	if (wsize == 0)
 		wsize = NFS_MAX_FILE_IO_SIZE;
 
-	session = clp->cl_session;
 	session->fc_attrs.max_rqst_sz = wsize + nfs41_maxwrite_overhead;
 	session->fc_attrs.max_resp_sz = rsize + nfs41_maxread_overhead;
 
@@ -5060,69 +5089,70 @@ int nfs4_init_session(struct nfs_server *server)
 /*
  * Renew the cl_session lease.
  */
-static int nfs4_proc_sequence(struct nfs_client *clp, struct rpc_cred *cred)
-{
+struct nfs4_sequence_data {
+	struct nfs_client *clp;
 	struct nfs4_sequence_args args;
 	struct nfs4_sequence_res res;
-
-	struct rpc_message msg = {
-		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SEQUENCE],
-		.rpc_argp = &args,
-		.rpc_resp = &res,
-		.rpc_cred = cred,
-	};
-
-	args.sa_cache_this = 0;
-
-	return nfs4_call_sync_sequence(clp, clp->cl_rpcclient, &msg, &args,
-				       &res, args.sa_cache_this, 1);
-}
+};
 
 static void nfs41_sequence_release(void *data)
 {
-	struct nfs_client *clp = (struct nfs_client *)data;
+	struct nfs4_sequence_data *calldata = data;
+	struct nfs_client *clp = calldata->clp;
 
 	if (atomic_read(&clp->cl_count) > 1)
 		nfs4_schedule_state_renewal(clp);
 	nfs_put_client(clp);
+	kfree(calldata);
+}
+
+static int nfs41_sequence_handle_errors(struct rpc_task *task, struct nfs_client *clp)
+{
+	switch(task->tk_status) {
+	case -NFS4ERR_DELAY:
+	case -EKEYEXPIRED:
+		rpc_delay(task, NFS4_POLL_RETRY_MAX);
+		return -EAGAIN;
+	default:
+		nfs4_schedule_state_recovery(clp);
+	}
+	return 0;
 }
 
 static void nfs41_sequence_call_done(struct rpc_task *task, void *data)
 {
-	struct nfs_client *clp = (struct nfs_client *)data;
+	struct nfs4_sequence_data *calldata = data;
+	struct nfs_client *clp = calldata->clp;
 
-	nfs41_sequence_done(clp, task->tk_msg.rpc_resp, task->tk_status);
+	if (!nfs41_sequence_done(task, task->tk_msg.rpc_resp))
+		return;
 
 	if (task->tk_status < 0) {
 		dprintk("%s ERROR %d\n", __func__, task->tk_status);
 		if (atomic_read(&clp->cl_count) == 1)
 			goto out;
 
-		if (_nfs4_async_handle_error(task, NULL, clp, NULL)
-								== -EAGAIN) {
-			nfs_restart_rpc(task, clp);
+		if (nfs41_sequence_handle_errors(task, clp) == -EAGAIN) {
+			rpc_restart_call_prepare(task);
 			return;
 		}
 	}
 	dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred);
 out:
-	kfree(task->tk_msg.rpc_argp);
-	kfree(task->tk_msg.rpc_resp);
-
 	dprintk("<-- %s\n", __func__);
 }
 
 static void nfs41_sequence_prepare(struct rpc_task *task, void *data)
 {
-	struct nfs_client *clp;
+	struct nfs4_sequence_data *calldata = data;
+	struct nfs_client *clp = calldata->clp;
 	struct nfs4_sequence_args *args;
 	struct nfs4_sequence_res *res;
 
-	clp = (struct nfs_client *)data;
 	args = task->tk_msg.rpc_argp;
 	res = task->tk_msg.rpc_resp;
 
-	if (nfs4_setup_sequence(clp, args, res, 0, task))
+	if (nfs41_setup_sequence(clp->cl_session, args, res, 0, task))
 		return;
 	rpc_call_start(task);
 }
@@ -5133,32 +5163,67 @@ static const struct rpc_call_ops nfs41_sequence_ops = {
 	.rpc_release = nfs41_sequence_release,
 };
 
-static int nfs41_proc_async_sequence(struct nfs_client *clp,
-				     struct rpc_cred *cred)
+static struct rpc_task *_nfs41_proc_sequence(struct nfs_client *clp, struct rpc_cred *cred)
 {
-	struct nfs4_sequence_args *args;
-	struct nfs4_sequence_res *res;
+	struct nfs4_sequence_data *calldata;
 	struct rpc_message msg = {
 		.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_SEQUENCE],
 		.rpc_cred = cred,
 	};
+	struct rpc_task_setup task_setup_data = {
+		.rpc_client = clp->cl_rpcclient,
+		.rpc_message = &msg,
+		.callback_ops = &nfs41_sequence_ops,
+		.flags = RPC_TASK_ASYNC | RPC_TASK_SOFT,
+	};
 
 	if (!atomic_inc_not_zero(&clp->cl_count))
-		return -EIO;
-	args = kzalloc(sizeof(*args), GFP_NOFS);
-	res = kzalloc(sizeof(*res), GFP_NOFS);
-	if (!args || !res) {
-		kfree(args);
-		kfree(res);
+		return ERR_PTR(-EIO);
+	calldata = kmalloc(sizeof(*calldata), GFP_NOFS);
+	if (calldata == NULL) {
 		nfs_put_client(clp);
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	}
-	res->sr_slotid = NFS4_MAX_SLOT_TABLE;
-	msg.rpc_argp = args;
-	msg.rpc_resp = res;
+	calldata->res.sr_slotid = NFS4_MAX_SLOT_TABLE;
+	msg.rpc_argp = &calldata->args;
+	msg.rpc_resp = &calldata->res;
+	calldata->clp = clp;
+	task_setup_data.callback_data = calldata;
 
-	return rpc_call_async(clp->cl_rpcclient, &msg, RPC_TASK_SOFT,
-			      &nfs41_sequence_ops, (void *)clp);
+	return rpc_run_task(&task_setup_data);
+}
+
+static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+{
+	struct rpc_task *task;
+	int ret = 0;
+
+	task = _nfs41_proc_sequence(clp, cred);
+	if (IS_ERR(task))
+		ret = PTR_ERR(task);
+	else
+		rpc_put_task(task);
+	dprintk("<-- %s status=%d\n", __func__, ret);
+	return ret;
+}
+
+static int nfs4_proc_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+{
+	struct rpc_task *task;
+	int ret;
+
+	task = _nfs41_proc_sequence(clp, cred);
+	if (IS_ERR(task)) {
+		ret = PTR_ERR(task);
+		goto out;
+	}
+	ret = rpc_wait_for_completion_task(task);
+	if (!ret)
+		ret = task->tk_status;
+	rpc_put_task(task);
+out:
+	dprintk("<-- %s status=%d\n", __func__, ret);
+	return ret;
 }
 
 struct nfs4_reclaim_complete_data {
@@ -5172,13 +5237,31 @@ static void nfs4_reclaim_complete_prepare(struct rpc_task *task, void *data)
 	struct nfs4_reclaim_complete_data *calldata = data;
 
 	rpc_task_set_priority(task, RPC_PRIORITY_PRIVILEGED);
-	if (nfs4_setup_sequence(calldata->clp, &calldata->arg.seq_args,
+	if (nfs41_setup_sequence(calldata->clp->cl_session,
+				&calldata->arg.seq_args,
 				&calldata->res.seq_res, 0, task))
 		return;
 
 	rpc_call_start(task);
 }
 
+static int nfs41_reclaim_complete_handle_errors(struct rpc_task *task, struct nfs_client *clp)
+{
+	switch(task->tk_status) {
+	case 0:
+	case -NFS4ERR_COMPLETE_ALREADY:
+	case -NFS4ERR_WRONG_CRED: /* What to do here? */
+		break;
+	case -NFS4ERR_DELAY:
+	case -EKEYEXPIRED:
+		rpc_delay(task, NFS4_POLL_RETRY_MAX);
+		return -EAGAIN;
+	default:
+		nfs4_schedule_state_recovery(clp);
+	}
+	return 0;
+}
+
 static void nfs4_reclaim_complete_done(struct rpc_task *task, void *data)
 {
 	struct nfs4_reclaim_complete_data *calldata = data;
@@ -5186,32 +5269,13 @@ static void nfs4_reclaim_complete_done(struct rpc_task *task, void *data)
 	struct nfs4_sequence_res *res = &calldata->res.seq_res;
 
 	dprintk("--> %s\n", __func__);
-	nfs41_sequence_done(clp, res, task->tk_status);
-	switch (task->tk_status) {
-	case 0:
-	case -NFS4ERR_COMPLETE_ALREADY:
-		break;
-	case -NFS4ERR_BADSESSION:
-	case -NFS4ERR_DEADSESSION:
-		/*
-		 * Handle the session error, but do not retry the operation, as
-		 * we have no way of telling whether the clientid had to be
-		 * reset before we got our reply.  If reset, a new wave of
-		 * reclaim operations will follow, containing their own reclaim
-		 * complete.  We don't want our retry to get on the way of
-		 * recovery by incorrectly indicating to the server that we're
-		 * done reclaiming state since the process had to be restarted.
-		 */
-		_nfs4_async_handle_error(task, NULL, clp, NULL);
-		break;
-	default:
-		if (_nfs4_async_handle_error(
-				task, NULL, clp, NULL) == -EAGAIN) {
-			rpc_restart_call_prepare(task);
-			return;
-		}
-	}
+	if (!nfs41_sequence_done(task, res))
+		return;
 
+	if (nfs41_reclaim_complete_handle_errors(task, clp) == -EAGAIN) {
+		rpc_restart_call_prepare(task);
+		return;
+	}
 	dprintk("<-- %s\n", __func__);
 }
 
@@ -5325,28 +5389,30 @@ struct nfs4_state_maintenance_ops nfs41_state_renewal_ops = {
 };
 #endif
 
-/*
- * Per minor version reboot and network partition recovery ops
- */
-
-struct nfs4_state_recovery_ops *nfs4_reboot_recovery_ops[] = {
-	&nfs40_reboot_recovery_ops,
-#if defined(CONFIG_NFS_V4_1)
-	&nfs41_reboot_recovery_ops,
-#endif
+static const struct nfs4_minor_version_ops nfs_v4_0_minor_ops = {
+	.minor_version = 0,
+	.call_sync = _nfs4_call_sync,
+	.validate_stateid = nfs4_validate_delegation_stateid,
+	.reboot_recovery_ops = &nfs40_reboot_recovery_ops,
+	.nograce_recovery_ops = &nfs40_nograce_recovery_ops,
+	.state_renewal_ops = &nfs40_state_renewal_ops,
 };
 
-struct nfs4_state_recovery_ops *nfs4_nograce_recovery_ops[] = {
-	&nfs40_nograce_recovery_ops,
 #if defined(CONFIG_NFS_V4_1)
-	&nfs41_nograce_recovery_ops,
-#endif
+static const struct nfs4_minor_version_ops nfs_v4_1_minor_ops = {
+	.minor_version = 1,
+	.call_sync = _nfs4_call_sync_session,
+	.validate_stateid = nfs41_validate_delegation_stateid,
+	.reboot_recovery_ops = &nfs41_reboot_recovery_ops,
+	.nograce_recovery_ops = &nfs41_nograce_recovery_ops,
+	.state_renewal_ops = &nfs41_state_renewal_ops,
 };
+#endif
 
-struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[] = {
-	&nfs40_state_renewal_ops,
+const struct nfs4_minor_version_ops *nfs_v4_minor_ops[] = {
+	[0] = &nfs_v4_0_minor_ops,
 #if defined(CONFIG_NFS_V4_1)
-	&nfs41_state_renewal_ops,
+	[1] = &nfs_v4_1_minor_ops,
 #endif
 };
 
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index d87f10327b7..72b6c580af1 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -54,14 +54,14 @@
 void
 nfs4_renew_state(struct work_struct *work)
 {
-	struct nfs4_state_maintenance_ops *ops;
+	const struct nfs4_state_maintenance_ops *ops;
 	struct nfs_client *clp =
 		container_of(work, struct nfs_client, cl_renewd.work);
 	struct rpc_cred *cred;
 	long lease;
 	unsigned long last, now;
 
-	ops = nfs4_state_renewal_ops[clp->cl_minorversion];
+	ops = clp->cl_mvops->state_renewal_ops;
 	dprintk("%s: start\n", __func__);
 	/* Are there any active superblocks? */
 	if (list_empty(&clp->cl_superblocks))
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 34acf5926fd..3e2f19b04c0 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -145,7 +145,9 @@ static void nfs4_end_drain_session(struct nfs_client *clp)
 	struct nfs4_session *ses = clp->cl_session;
 	int max_slots;
 
-	if (test_and_clear_bit(NFS4CLNT_SESSION_DRAINING, &clp->cl_state)) {
+	if (ses == NULL)
+		return;
+	if (test_and_clear_bit(NFS4_SESSION_DRAINING, &ses->session_state)) {
 		spin_lock(&ses->fc_slot_table.slot_tbl_lock);
 		max_slots = ses->fc_slot_table.max_slots;
 		while (max_slots--) {
@@ -167,7 +169,7 @@ static int nfs4_begin_drain_session(struct nfs_client *clp)
 	struct nfs4_slot_table *tbl = &ses->fc_slot_table;
 
 	spin_lock(&tbl->slot_tbl_lock);
-	set_bit(NFS4CLNT_SESSION_DRAINING, &clp->cl_state);
+	set_bit(NFS4_SESSION_DRAINING, &ses->session_state);
 	if (tbl->highest_used_slotid != -1) {
 		INIT_COMPLETION(ses->complete);
 		spin_unlock(&tbl->slot_tbl_lock);
@@ -371,7 +373,6 @@ nfs4_alloc_state_owner(void)
 		return NULL;
 	spin_lock_init(&sp->so_lock);
 	INIT_LIST_HEAD(&sp->so_states);
-	INIT_LIST_HEAD(&sp->so_delegations);
 	rpc_init_wait_queue(&sp->so_sequence.wait, "Seqid_waitqueue");
 	sp->so_seqid.sequence = &sp->so_sequence;
 	spin_lock_init(&sp->so_sequence.lock);
@@ -384,7 +385,7 @@ static void
 nfs4_drop_state_owner(struct nfs4_state_owner *sp)
 {
 	if (!RB_EMPTY_NODE(&sp->so_client_node)) {
-		struct nfs_client *clp = sp->so_client;
+		struct nfs_client *clp = sp->so_server->nfs_client;
 
 		spin_lock(&clp->cl_lock);
 		rb_erase(&sp->so_client_node, &clp->cl_state_owners);
@@ -406,7 +407,6 @@ struct nfs4_state_owner *nfs4_get_state_owner(struct nfs_server *server, struct
 	new = nfs4_alloc_state_owner();
 	if (new == NULL)
 		return NULL;
-	new->so_client = clp;
 	new->so_server = server;
 	new->so_cred = cred;
 	spin_lock(&clp->cl_lock);
@@ -423,7 +423,7 @@ struct nfs4_state_owner *nfs4_get_state_owner(struct nfs_server *server, struct
 
 void nfs4_put_state_owner(struct nfs4_state_owner *sp)
 {
-	struct nfs_client *clp = sp->so_client;
+	struct nfs_client *clp = sp->so_server->nfs_client;
 	struct rpc_cred *cred = sp->so_cred;
 
 	if (!atomic_dec_and_lock(&sp->so_count, &clp->cl_lock))
@@ -602,12 +602,21 @@ void nfs4_close_sync(struct path *path, struct nfs4_state *state, fmode_t fmode)
  * that is compatible with current->files
  */
 static struct nfs4_lock_state *
-__nfs4_find_lock_state(struct nfs4_state *state, fl_owner_t fl_owner)
+__nfs4_find_lock_state(struct nfs4_state *state, fl_owner_t fl_owner, pid_t fl_pid, unsigned int type)
 {
 	struct nfs4_lock_state *pos;
 	list_for_each_entry(pos, &state->lock_states, ls_locks) {
-		if (pos->ls_owner != fl_owner)
+		if (type != NFS4_ANY_LOCK_TYPE && pos->ls_owner.lo_type != type)
 			continue;
+		switch (pos->ls_owner.lo_type) {
+		case NFS4_POSIX_LOCK_TYPE:
+			if (pos->ls_owner.lo_u.posix_owner != fl_owner)
+				continue;
+			break;
+		case NFS4_FLOCK_LOCK_TYPE:
+			if (pos->ls_owner.lo_u.flock_owner != fl_pid)
+				continue;
+		}
 		atomic_inc(&pos->ls_count);
 		return pos;
 	}
@@ -619,10 +628,10 @@ __nfs4_find_lock_state(struct nfs4_state *state, fl_owner_t fl_owner)
  * exists, return an uninitialized one.
  *
  */
-static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, fl_owner_t fl_owner)
+static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, fl_owner_t fl_owner, pid_t fl_pid, unsigned int type)
 {
 	struct nfs4_lock_state *lsp;
-	struct nfs_client *clp = state->owner->so_client;
+	struct nfs_client *clp = state->owner->so_server->nfs_client;
 
 	lsp = kzalloc(sizeof(*lsp), GFP_NOFS);
 	if (lsp == NULL)
@@ -633,7 +642,18 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f
 	lsp->ls_seqid.sequence = &lsp->ls_sequence;
 	atomic_set(&lsp->ls_count, 1);
 	lsp->ls_state = state;
-	lsp->ls_owner = fl_owner;
+	lsp->ls_owner.lo_type = type;
+	switch (lsp->ls_owner.lo_type) {
+	case NFS4_FLOCK_LOCK_TYPE:
+		lsp->ls_owner.lo_u.flock_owner = fl_pid;
+		break;
+	case NFS4_POSIX_LOCK_TYPE:
+		lsp->ls_owner.lo_u.posix_owner = fl_owner;
+		break;
+	default:
+		kfree(lsp);
+		return NULL;
+	}
 	spin_lock(&clp->cl_lock);
 	nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64);
 	spin_unlock(&clp->cl_lock);
@@ -643,7 +663,7 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f
 
 static void nfs4_free_lock_state(struct nfs4_lock_state *lsp)
 {
-	struct nfs_client *clp = lsp->ls_state->owner->so_client;
+	struct nfs_client *clp = lsp->ls_state->owner->so_server->nfs_client;
 
 	spin_lock(&clp->cl_lock);
 	nfs_free_unique_id(&clp->cl_lockowner_id, &lsp->ls_id);
@@ -657,13 +677,13 @@ static void nfs4_free_lock_state(struct nfs4_lock_state *lsp)
  * exists, return an uninitialized one.
  *
  */
-static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_owner_t owner)
+static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_owner_t owner, pid_t pid, unsigned int type)
 {
 	struct nfs4_lock_state *lsp, *new = NULL;
 	
 	for(;;) {
 		spin_lock(&state->state_lock);
-		lsp = __nfs4_find_lock_state(state, owner);
+		lsp = __nfs4_find_lock_state(state, owner, pid, type);
 		if (lsp != NULL)
 			break;
 		if (new != NULL) {
@@ -674,7 +694,7 @@ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_
 			break;
 		}
 		spin_unlock(&state->state_lock);
-		new = nfs4_alloc_lock_state(state, owner);
+		new = nfs4_alloc_lock_state(state, owner, pid, type);
 		if (new == NULL)
 			return NULL;
 	}
@@ -701,6 +721,8 @@ void nfs4_put_lock_state(struct nfs4_lock_state *lsp)
 	if (list_empty(&state->lock_states))
 		clear_bit(LK_STATE_IN_USE, &state->flags);
 	spin_unlock(&state->state_lock);
+	if (lsp->ls_flags & NFS_LOCK_INITIALIZED)
+		nfs4_release_lockowner(lsp);
 	nfs4_free_lock_state(lsp);
 }
 
@@ -728,7 +750,12 @@ int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl)
 
 	if (fl->fl_ops != NULL)
 		return 0;
-	lsp = nfs4_get_lock_state(state, fl->fl_owner);
+	if (fl->fl_flags & FL_POSIX)
+		lsp = nfs4_get_lock_state(state, fl->fl_owner, 0, NFS4_POSIX_LOCK_TYPE);
+	else if (fl->fl_flags & FL_FLOCK)
+		lsp = nfs4_get_lock_state(state, 0, fl->fl_pid, NFS4_FLOCK_LOCK_TYPE);
+	else
+		return -EINVAL;
 	if (lsp == NULL)
 		return -ENOMEM;
 	fl->fl_u.nfs4_fl.owner = lsp;
@@ -740,7 +767,7 @@ int nfs4_set_lock_state(struct nfs4_state *state, struct file_lock *fl)
  * Byte-range lock aware utility to initialize the stateid of read/write
  * requests.
  */
-void nfs4_copy_stateid(nfs4_stateid *dst, struct nfs4_state *state, fl_owner_t fl_owner)
+void nfs4_copy_stateid(nfs4_stateid *dst, struct nfs4_state *state, fl_owner_t fl_owner, pid_t fl_pid)
 {
 	struct nfs4_lock_state *lsp;
 	int seq;
@@ -753,7 +780,7 @@ void nfs4_copy_stateid(nfs4_stateid *dst, struct nfs4_state *state, fl_owner_t f
 		return;
 
 	spin_lock(&state->state_lock);
-	lsp = __nfs4_find_lock_state(state, fl_owner);
+	lsp = __nfs4_find_lock_state(state, fl_owner, fl_pid, NFS4_ANY_LOCK_TYPE);
 	if (lsp != NULL && (lsp->ls_flags & NFS_LOCK_INITIALIZED) != 0)
 		memcpy(dst, &lsp->ls_stateid, sizeof(*dst));
 	spin_unlock(&state->state_lock);
@@ -1041,11 +1068,11 @@ restart:
 			case -NFS4ERR_BAD_STATEID:
 			case -NFS4ERR_RECLAIM_BAD:
 			case -NFS4ERR_RECLAIM_CONFLICT:
-				nfs4_state_mark_reclaim_nograce(sp->so_client, state);
+				nfs4_state_mark_reclaim_nograce(sp->so_server->nfs_client, state);
 				break;
 			case -NFS4ERR_EXPIRED:
 			case -NFS4ERR_NO_GRACE:
-				nfs4_state_mark_reclaim_nograce(sp->so_client, state);
+				nfs4_state_mark_reclaim_nograce(sp->so_server->nfs_client, state);
 			case -NFS4ERR_STALE_CLIENTID:
 			case -NFS4ERR_BADSESSION:
 			case -NFS4ERR_BADSLOT:
@@ -1120,8 +1147,7 @@ static void nfs4_state_end_reclaim_reboot(struct nfs_client *clp)
 	if (!test_and_clear_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state))
 		return;
 
-	nfs4_reclaim_complete(clp,
-		nfs4_reboot_recovery_ops[clp->cl_minorversion]);
+	nfs4_reclaim_complete(clp, clp->cl_mvops->reboot_recovery_ops);
 
 	for (pos = rb_first(&clp->cl_state_owners); pos != NULL; pos = rb_next(pos)) {
 		sp = rb_entry(pos, struct nfs4_state_owner, so_client_node);
@@ -1211,8 +1237,8 @@ restart:
 static int nfs4_check_lease(struct nfs_client *clp)
 {
 	struct rpc_cred *cred;
-	struct nfs4_state_maintenance_ops *ops =
-		nfs4_state_renewal_ops[clp->cl_minorversion];
+	const struct nfs4_state_maintenance_ops *ops =
+		clp->cl_mvops->state_renewal_ops;
 	int status = -NFS4ERR_EXPIRED;
 
 	/* Is the client already known to have an expired lease? */
@@ -1235,8 +1261,8 @@ out:
 static int nfs4_reclaim_lease(struct nfs_client *clp)
 {
 	struct rpc_cred *cred;
-	struct nfs4_state_recovery_ops *ops =
-		nfs4_reboot_recovery_ops[clp->cl_minorversion];
+	const struct nfs4_state_recovery_ops *ops =
+		clp->cl_mvops->reboot_recovery_ops;
 	int status = -ENOENT;
 
 	cred = ops->get_clid_cred(clp);
@@ -1444,7 +1470,7 @@ static void nfs4_state_manager(struct nfs_client *clp)
 		/* First recover reboot state... */
 		if (test_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state)) {
 			status = nfs4_do_reclaim(clp,
-				nfs4_reboot_recovery_ops[clp->cl_minorversion]);
+				clp->cl_mvops->reboot_recovery_ops);
 			if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state) ||
 			    test_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state))
 				continue;
@@ -1458,7 +1484,7 @@ static void nfs4_state_manager(struct nfs_client *clp)
 		/* Now recover expired state... */
 		if (test_and_clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state)) {
 			status = nfs4_do_reclaim(clp,
-				nfs4_nograce_recovery_ops[clp->cl_minorversion]);
+				clp->cl_mvops->nograce_recovery_ops);
 			if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state) ||
 			    test_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state) ||
 			    test_bit(NFS4CLNT_RECLAIM_REBOOT, &clp->cl_state))
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 65c8dae4b26..08ef9129113 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -202,14 +202,17 @@ static int nfs4_stat_to_errno(int);
 #define encode_link_maxsz	(op_encode_hdr_maxsz + \
 				nfs4_name_maxsz)
 #define decode_link_maxsz	(op_decode_hdr_maxsz + decode_change_info_maxsz)
+#define encode_lockowner_maxsz	(7)
 #define encode_lock_maxsz	(op_encode_hdr_maxsz + \
 				 7 + \
-				 1 + encode_stateid_maxsz + 8)
+				 1 + encode_stateid_maxsz + 1 + \
+				 encode_lockowner_maxsz)
 #define decode_lock_denied_maxsz \
 				(8 + decode_lockowner_maxsz)
 #define decode_lock_maxsz	(op_decode_hdr_maxsz + \
 				 decode_lock_denied_maxsz)
-#define encode_lockt_maxsz	(op_encode_hdr_maxsz + 12)
+#define encode_lockt_maxsz	(op_encode_hdr_maxsz + 5 + \
+				encode_lockowner_maxsz)
 #define decode_lockt_maxsz	(op_decode_hdr_maxsz + \
 				 decode_lock_denied_maxsz)
 #define encode_locku_maxsz	(op_encode_hdr_maxsz + 3 + \
@@ -217,6 +220,11 @@ static int nfs4_stat_to_errno(int);
 				 4)
 #define decode_locku_maxsz	(op_decode_hdr_maxsz + \
 				 decode_stateid_maxsz)
+#define encode_release_lockowner_maxsz \
+				(op_encode_hdr_maxsz + \
+				 encode_lockowner_maxsz)
+#define decode_release_lockowner_maxsz \
+				(op_decode_hdr_maxsz)
 #define encode_access_maxsz	(op_encode_hdr_maxsz + 1)
 #define decode_access_maxsz	(op_decode_hdr_maxsz + 2)
 #define encode_symlink_maxsz	(op_encode_hdr_maxsz + \
@@ -471,6 +479,12 @@ static int nfs4_stat_to_errno(int);
 				decode_sequence_maxsz + \
 				decode_putfh_maxsz + \
 				decode_locku_maxsz)
+#define NFS4_enc_release_lockowner_sz \
+				(compound_encode_hdr_maxsz + \
+				 encode_lockowner_maxsz)
+#define NFS4_dec_release_lockowner_sz \
+				(compound_decode_hdr_maxsz + \
+				 decode_lockowner_maxsz)
 #define NFS4_enc_access_sz	(compound_encode_hdr_maxsz + \
 				encode_sequence_maxsz + \
 				encode_putfh_maxsz + \
@@ -744,7 +758,7 @@ static void encode_compound_hdr(struct xdr_stream *xdr,
 				struct compound_hdr *hdr)
 {
 	__be32 *p;
-	struct rpc_auth *auth = req->rq_task->tk_msg.rpc_cred->cr_auth;
+	struct rpc_auth *auth = req->rq_cred->cr_auth;
 
 	/* initialize running count of expected bytes in reply.
 	 * NOTE: the replied tag SHOULD be the same is the one sent,
@@ -1042,6 +1056,17 @@ static inline uint64_t nfs4_lock_length(struct file_lock *fl)
 	return fl->fl_end - fl->fl_start + 1;
 }
 
+static void encode_lockowner(struct xdr_stream *xdr, const struct nfs_lowner *lowner)
+{
+	__be32 *p;
+
+	p = reserve_space(xdr, 28);
+	p = xdr_encode_hyper(p, lowner->clientid);
+	*p++ = cpu_to_be32(16);
+	p = xdr_encode_opaque_fixed(p, "lock id:", 8);
+	xdr_encode_hyper(p, lowner->id);
+}
+
 /*
  * opcode,type,reclaim,offset,length,new_lock_owner = 32
  * open_seqid,open_stateid,lock_seqid,lock_owner.clientid, lock_owner.id = 40
@@ -1058,14 +1083,11 @@ static void encode_lock(struct xdr_stream *xdr, const struct nfs_lock_args *args
 	p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
 	*p = cpu_to_be32(args->new_lock_owner);
 	if (args->new_lock_owner){
-		p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+32);
+		p = reserve_space(xdr, 4+NFS4_STATEID_SIZE+4);
 		*p++ = cpu_to_be32(args->open_seqid->sequence->counter);
 		p = xdr_encode_opaque_fixed(p, args->open_stateid->data, NFS4_STATEID_SIZE);
 		*p++ = cpu_to_be32(args->lock_seqid->sequence->counter);
-		p = xdr_encode_hyper(p, args->lock_owner.clientid);
-		*p++ = cpu_to_be32(16);
-		p = xdr_encode_opaque_fixed(p, "lock id:", 8);
-		xdr_encode_hyper(p, args->lock_owner.id);
+		encode_lockowner(xdr, &args->lock_owner);
 	}
 	else {
 		p = reserve_space(xdr, NFS4_STATEID_SIZE+4);
@@ -1080,15 +1102,12 @@ static void encode_lockt(struct xdr_stream *xdr, const struct nfs_lockt_args *ar
 {
 	__be32 *p;
 
-	p = reserve_space(xdr, 52);
+	p = reserve_space(xdr, 24);
 	*p++ = cpu_to_be32(OP_LOCKT);
 	*p++ = cpu_to_be32(nfs4_lock_type(args->fl, 0));
 	p = xdr_encode_hyper(p, args->fl->fl_start);
 	p = xdr_encode_hyper(p, nfs4_lock_length(args->fl));
-	p = xdr_encode_hyper(p, args->lock_owner.clientid);
-	*p++ = cpu_to_be32(16);
-	p = xdr_encode_opaque_fixed(p, "lock id:", 8);
-	xdr_encode_hyper(p, args->lock_owner.id);
+	encode_lockowner(xdr, &args->lock_owner);
 	hdr->nops++;
 	hdr->replen += decode_lockt_maxsz;
 }
@@ -1108,6 +1127,17 @@ static void encode_locku(struct xdr_stream *xdr, const struct nfs_locku_args *ar
 	hdr->replen += decode_locku_maxsz;
 }
 
+static void encode_release_lockowner(struct xdr_stream *xdr, const struct nfs_lowner *lowner, struct compound_hdr *hdr)
+{
+	__be32 *p;
+
+	p = reserve_space(xdr, 4);
+	*p = cpu_to_be32(OP_RELEASE_LOCKOWNER);
+	encode_lockowner(xdr, lowner);
+	hdr->nops++;
+	hdr->replen += decode_release_lockowner_maxsz;
+}
+
 static void encode_lookup(struct xdr_stream *xdr, const struct qstr *name, struct compound_hdr *hdr)
 {
 	int len = name->len;
@@ -1172,7 +1202,7 @@ static inline void encode_createmode(struct xdr_stream *xdr, const struct nfs_op
 		break;
 	default:
 		clp = arg->server->nfs_client;
-		if (clp->cl_minorversion > 0) {
+		if (clp->cl_mvops->minor_version > 0) {
 			if (nfs4_has_persistent_session(clp)) {
 				*p = cpu_to_be32(NFS4_CREATE_GUARDED);
 				encode_attrs(xdr, arg->u.attrs, arg->server);
@@ -1324,14 +1354,14 @@ static void encode_putrootfh(struct xdr_stream *xdr, struct compound_hdr *hdr)
 	hdr->replen += decode_putrootfh_maxsz;
 }
 
-static void encode_stateid(struct xdr_stream *xdr, const struct nfs_open_context *ctx)
+static void encode_stateid(struct xdr_stream *xdr, const struct nfs_open_context *ctx, const struct nfs_lock_context *l_ctx)
 {
 	nfs4_stateid stateid;
 	__be32 *p;
 
 	p = reserve_space(xdr, NFS4_STATEID_SIZE);
 	if (ctx->state != NULL) {
-		nfs4_copy_stateid(&stateid, ctx->state, ctx->lockowner);
+		nfs4_copy_stateid(&stateid, ctx->state, l_ctx->lockowner, l_ctx->pid);
 		xdr_encode_opaque_fixed(p, stateid.data, NFS4_STATEID_SIZE);
 	} else
 		xdr_encode_opaque_fixed(p, zero_stateid.data, NFS4_STATEID_SIZE);
@@ -1344,7 +1374,7 @@ static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args,
 	p = reserve_space(xdr, 4);
 	*p = cpu_to_be32(OP_READ);
 
-	encode_stateid(xdr, args->context);
+	encode_stateid(xdr, args->context, args->lock_context);
 
 	p = reserve_space(xdr, 12);
 	p = xdr_encode_hyper(p, args->offset);
@@ -1523,7 +1553,7 @@ static void encode_write(struct xdr_stream *xdr, const struct nfs_writeargs *arg
 	p = reserve_space(xdr, 4);
 	*p = cpu_to_be32(OP_WRITE);
 
-	encode_stateid(xdr, args->context);
+	encode_stateid(xdr, args->context, args->lock_context);
 
 	p = reserve_space(xdr, 16);
 	p = xdr_encode_hyper(p, args->offset);
@@ -1704,7 +1734,7 @@ static u32 nfs4_xdr_minorversion(const struct nfs4_sequence_args *args)
 {
 #if defined(CONFIG_NFS_V4_1)
 	if (args->sa_session)
-		return args->sa_session->clp->cl_minorversion;
+		return args->sa_session->clp->cl_mvops->minor_version;
 #endif /* CONFIG_NFS_V4_1 */
 	return 0;
 }
@@ -2048,6 +2078,20 @@ static int nfs4_xdr_enc_locku(struct rpc_rqst *req, __be32 *p, struct nfs_locku_
 	return 0;
 }
 
+static int nfs4_xdr_enc_release_lockowner(struct rpc_rqst *req, __be32 *p, struct nfs_release_lockowner_args *args)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr = {
+		.minorversion = 0,
+	};
+
+	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
+	encode_compound_hdr(&xdr, req, &hdr);
+	encode_release_lockowner(&xdr, &args->lock_owner, &hdr);
+	encode_nops(&hdr);
+	return 0;
+}
+
 /*
  * Encode a READLINK request
  */
@@ -2395,7 +2439,7 @@ static int nfs4_xdr_enc_exchange_id(struct rpc_rqst *req, uint32_t *p,
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.minorversion = args->client->cl_minorversion,
+		.minorversion = args->client->cl_mvops->minor_version,
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
@@ -2413,7 +2457,7 @@ static int nfs4_xdr_enc_create_session(struct rpc_rqst *req, uint32_t *p,
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.minorversion = args->client->cl_minorversion,
+		.minorversion = args->client->cl_mvops->minor_version,
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
@@ -2431,7 +2475,7 @@ static int nfs4_xdr_enc_destroy_session(struct rpc_rqst *req, uint32_t *p,
 {
 	struct xdr_stream xdr;
 	struct compound_hdr hdr = {
-		.minorversion = session->clp->cl_minorversion,
+		.minorversion = session->clp->cl_mvops->minor_version,
 	};
 
 	xdr_init_encode(&xdr, &req->rq_snd_buf, p);
@@ -3973,6 +4017,11 @@ static int decode_locku(struct xdr_stream *xdr, struct nfs_locku_res *res)
 	return status;
 }
 
+static int decode_release_lockowner(struct xdr_stream *xdr)
+{
+	return decode_op_hdr(xdr, OP_RELEASE_LOCKOWNER);
+}
+
 static int decode_lookup(struct xdr_stream *xdr)
 {
 	return decode_op_hdr(xdr, OP_LOOKUP);
@@ -5259,6 +5308,19 @@ out:
 	return status;
 }
 
+static int nfs4_xdr_dec_release_lockowner(struct rpc_rqst *rqstp, __be32 *p, void *dummy)
+{
+	struct xdr_stream xdr;
+	struct compound_hdr hdr;
+	int status;
+
+	xdr_init_decode(&xdr, &rqstp->rq_rcv_buf, p);
+	status = decode_compound_hdr(&xdr, &hdr);
+	if (!status)
+		status = decode_release_lockowner(&xdr);
+	return status;
+}
+
 /*
  * Decode READLINK response
  */
@@ -5866,6 +5928,7 @@ struct rpc_procinfo	nfs4_procedures[] = {
   PROC(GETACL,		enc_getacl,	dec_getacl),
   PROC(SETACL,		enc_setacl,	dec_setacl),
   PROC(FS_LOCATIONS,	enc_fs_locations, dec_fs_locations),
+  PROC(RELEASE_LOCKOWNER, enc_release_lockowner, dec_release_lockowner),
 #if defined(CONFIG_NFS_V4_1)
   PROC(EXCHANGE_ID,	enc_exchange_id,	dec_exchange_id),
   PROC(CREATE_SESSION,	enc_create_session,	dec_create_session),
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index a3654e57b58..919490232e1 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -79,6 +79,7 @@ nfs_create_request(struct nfs_open_context *ctx, struct inode *inode,
 	req->wb_pgbase	= offset;
 	req->wb_bytes   = count;
 	req->wb_context = get_nfs_open_context(ctx);
+	req->wb_lock_context = nfs_get_lock_context(ctx);
 	kref_init(&req->wb_kref);
 	return req;
 }
@@ -141,11 +142,16 @@ void nfs_clear_request(struct nfs_page *req)
 {
 	struct page *page = req->wb_page;
 	struct nfs_open_context *ctx = req->wb_context;
+	struct nfs_lock_context *l_ctx = req->wb_lock_context;
 
 	if (page != NULL) {
 		page_cache_release(page);
 		req->wb_page = NULL;
 	}
+	if (l_ctx != NULL) {
+		nfs_put_lock_context(l_ctx);
+		req->wb_lock_context = NULL;
+	}
 	if (ctx != NULL) {
 		put_nfs_open_context(ctx);
 		req->wb_context = NULL;
@@ -235,7 +241,7 @@ static int nfs_can_coalesce_requests(struct nfs_page *prev,
 {
 	if (req->wb_context->cred != prev->wb_context->cred)
 		return 0;
-	if (req->wb_context->lockowner != prev->wb_context->lockowner)
+	if (req->wb_lock_context->lockowner != prev->wb_lock_context->lockowner)
 		return 0;
 	if (req->wb_context->state != prev->wb_context->state)
 		return 0;
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 6e2b06e6ca7..87adc274424 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -190,6 +190,7 @@ static int nfs_read_rpcsetup(struct nfs_page *req, struct nfs_read_data *data,
 	data->args.pages  = data->pagevec;
 	data->args.count  = count;
 	data->args.context = get_nfs_open_context(req->wb_context);
+	data->args.lock_context = req->wb_lock_context;
 
 	data->res.fattr   = &data->fattr;
 	data->res.count   = count;
@@ -410,7 +411,7 @@ void nfs_read_prepare(struct rpc_task *task, void *calldata)
 {
 	struct nfs_read_data *data = calldata;
 
-	if (nfs4_setup_sequence(NFS_SERVER(data->inode)->nfs_client,
+	if (nfs4_setup_sequence(NFS_SERVER(data->inode),
 				&data->args.seq_args, &data->res.seq_res,
 				0, task))
 		return;
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index f9df16de4a5..f1ae39f6cb0 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -546,6 +546,9 @@ static void nfs_show_mountd_options(struct seq_file *m, struct nfs_server *nfss,
 {
 	struct sockaddr *sap = (struct sockaddr *)&nfss->mountd_address;
 
+	if (nfss->flags & NFS_MOUNT_LEGACY_INTERFACE)
+		return;
+
 	switch (sap->sa_family) {
 	case AF_INET: {
 		struct sockaddr_in *sin = (struct sockaddr_in *)sap;
@@ -1780,6 +1783,7 @@ static int nfs_validate_mount_data(void *options,
 		 * can deal with.
 		 */
 		args->flags		= data->flags & NFS_MOUNT_FLAGMASK;
+		args->flags		|= NFS_MOUNT_LEGACY_INTERFACE;
 		args->rsize		= data->rsize;
 		args->wsize		= data->wsize;
 		args->timeo		= data->timeo;
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index a2242af6a17..2f84adaad42 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -110,7 +110,7 @@ void nfs_unlink_prepare(struct rpc_task *task, void *calldata)
 	struct nfs_unlinkdata *data = calldata;
 	struct nfs_server *server = NFS_SERVER(data->dir);
 
-	if (nfs4_setup_sequence(server->nfs_client, &data->args.seq_args,
+	if (nfs4_setup_sequence(server, &data->args.seq_args,
 				&data->res.seq_res, 1, task))
 		return;
 	rpc_call_start(task);
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 9f81bdd91c5..874972d9427 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -700,7 +700,9 @@ int nfs_flush_incompatible(struct file *file, struct page *page)
 		req = nfs_page_find_request(page);
 		if (req == NULL)
 			return 0;
-		do_flush = req->wb_page != page || req->wb_context != ctx;
+		do_flush = req->wb_page != page || req->wb_context != ctx ||
+			req->wb_lock_context->lockowner != current->files ||
+			req->wb_lock_context->pid != current->tgid;
 		nfs_release_request(req);
 		if (!do_flush)
 			return 0;
@@ -824,6 +826,7 @@ static int nfs_write_rpcsetup(struct nfs_page *req,
 	data->args.pages  = data->pagevec;
 	data->args.count  = count;
 	data->args.context = get_nfs_open_context(req->wb_context);
+	data->args.lock_context = req->wb_lock_context;
 	data->args.stable  = NFS_UNSTABLE;
 	if (how & FLUSH_STABLE) {
 		data->args.stable = NFS_DATA_SYNC;
@@ -1047,9 +1050,9 @@ out:
 void nfs_write_prepare(struct rpc_task *task, void *calldata)
 {
 	struct nfs_write_data *data = calldata;
-	struct nfs_client *clp = (NFS_SERVER(data->inode))->nfs_client;
 
-	if (nfs4_setup_sequence(clp, &data->args.seq_args,
+	if (nfs4_setup_sequence(NFS_SERVER(data->inode),
+				&data->args.seq_args,
 				&data->res.seq_res, 1, task))
 		return;
 	rpc_call_start(task);
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 3d68f45a37b..5b7e3021e06 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -168,7 +168,7 @@ nfsd3_proc_read(struct svc_rqst *rqstp, struct nfsd3_readargs *argp,
 	svc_reserve_auth(rqstp, ((1 + NFS3_POST_OP_ATTR_WORDS + 3)<<2) + resp->count +4);
 
 	fh_copy(&resp->fh, &argp->fh);
-	nfserr = nfsd_read(rqstp, &resp->fh, NULL,
+	nfserr = nfsd_read(rqstp, &resp->fh,
 				  argp->offset,
 			   	  rqstp->rq_vec, argp->vlen,
 				  &resp->count);
@@ -271,7 +271,7 @@ nfsd3_proc_mkdir(struct svc_rqst *rqstp, struct nfsd3_createargs *argp,
 	fh_init(&resp->fh, NFS3_FHSIZE);
 	nfserr = nfsd_create(rqstp, &resp->dirfh, argp->name, argp->len,
 				    &argp->attrs, S_IFDIR, 0, &resp->fh);
-
+	fh_unlock(&resp->dirfh);
 	RETURN_STATUS(nfserr);
 }
 
@@ -327,7 +327,7 @@ nfsd3_proc_mknod(struct svc_rqst *rqstp, struct nfsd3_mknodargs *argp,
 	type = nfs3_ftypes[argp->ftype];
 	nfserr = nfsd_create(rqstp, &resp->dirfh, argp->name, argp->len,
 				    &argp->attrs, type, rdev, &resp->fh);
-
+	fh_unlock(&resp->dirfh);
 	RETURN_STATUS(nfserr);
 }
 
@@ -348,6 +348,7 @@ nfsd3_proc_remove(struct svc_rqst *rqstp, struct nfsd3_diropargs *argp,
 	/* Unlink. -S_IFDIR means file must not be a directory */
 	fh_copy(&resp->fh, &argp->fh);
 	nfserr = nfsd_unlink(rqstp, &resp->fh, -S_IFDIR, argp->name, argp->len);
+	fh_unlock(&resp->fh);
 	RETURN_STATUS(nfserr);
 }
 
@@ -367,6 +368,7 @@ nfsd3_proc_rmdir(struct svc_rqst *rqstp, struct nfsd3_diropargs *argp,
 
 	fh_copy(&resp->fh, &argp->fh);
 	nfserr = nfsd_unlink(rqstp, &resp->fh, S_IFDIR, argp->name, argp->len);
+	fh_unlock(&resp->fh);
 	RETURN_STATUS(nfserr);
 }
 
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index eb78e7e2207..988cbb3a19b 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -143,8 +143,6 @@ struct nfs4_cb_compound_hdr {
 	u32		minorversion;
 	/* res */
 	int		status;
-	u32		taglen;
-	char		*tag;
 };
 
 static struct {
@@ -205,6 +203,16 @@ nfs_cb_stat_to_errno(int stat)
  */
 
 static void
+encode_stateid(struct xdr_stream *xdr, stateid_t *sid)
+{
+	__be32 *p;
+
+	RESERVE_SPACE(sizeof(stateid_t));
+	WRITE32(sid->si_generation);
+	WRITEMEM(&sid->si_opaque, sizeof(stateid_opaque_t));
+}
+
+static void
 encode_cb_compound_hdr(struct xdr_stream *xdr, struct nfs4_cb_compound_hdr *hdr)
 {
 	__be32 * p;
@@ -229,10 +237,10 @@ encode_cb_recall(struct xdr_stream *xdr, struct nfs4_delegation *dp,
 	__be32 *p;
 	int len = dp->dl_fh.fh_size;
 
-	RESERVE_SPACE(12+sizeof(dp->dl_stateid) + len);
+	RESERVE_SPACE(4);
 	WRITE32(OP_CB_RECALL);
-	WRITE32(dp->dl_stateid.si_generation);
-	WRITEMEM(&dp->dl_stateid.si_opaque, sizeof(stateid_opaque_t));
+	encode_stateid(xdr, &dp->dl_stateid);
+	RESERVE_SPACE(8 + (XDR_QUADLEN(len) << 2));
 	WRITE32(0); /* truncate optimization not implemented */
 	WRITE32(len);
 	WRITEMEM(&dp->dl_fh.fh_base, len);
@@ -293,13 +301,14 @@ nfs4_xdr_enc_cb_recall(struct rpc_rqst *req, __be32 *p,
 static int
 decode_cb_compound_hdr(struct xdr_stream *xdr, struct nfs4_cb_compound_hdr *hdr){
         __be32 *p;
+	u32 taglen;
 
         READ_BUF(8);
         READ32(hdr->status);
-        READ32(hdr->taglen);
-        READ_BUF(hdr->taglen + 4);
-        hdr->tag = (char *)p;
-        p += XDR_QUADLEN(hdr->taglen);
+	/* We've got no use for the tag; ignore it: */
+        READ32(taglen);
+        READ_BUF(taglen + 4);
+        p += XDR_QUADLEN(taglen);
         READ32(hdr->nops);
         return 0;
 }
@@ -667,28 +676,28 @@ static void nfsd4_cb_recall_done(struct rpc_task *task, void *calldata)
 	}
 
 	switch (task->tk_status) {
-	case -EIO:
+	case 0:
+		return;
+	case -EBADHANDLE:
+	case -NFS4ERR_BAD_STATEID:
+		/* Race: client probably got cb_recall
+		 * before open reply granting delegation */
+		break;
+	default:
 		/* Network partition? */
 		atomic_set(&clp->cl_cb_set, 0);
 		warn_no_callback_path(clp, task->tk_status);
 		if (current_rpc_client != task->tk_client) {
 			/* queue a callback on the new connection: */
+			atomic_inc(&dp->dl_count);
 			nfsd4_cb_recall(dp);
 			return;
 		}
-	case -EBADHANDLE:
-	case -NFS4ERR_BAD_STATEID:
-		/* Race: client probably got cb_recall
-		 * before open reply granting delegation */
-		break;
-	default:
-		/* success, or error we can't handle */
-		return;
 	}
 	if (dp->dl_retries--) {
 		rpc_delay(task, 2*HZ);
 		task->tk_status = 0;
-		rpc_restart_call(task);
+		rpc_restart_call_prepare(task);
 		return;
 	} else {
 		atomic_set(&clp->cl_cb_set, 0);
@@ -752,18 +761,16 @@ static void _nfsd4_cb_recall(struct nfs4_delegation *dp)
 		.rpc_proc = &nfs4_cb_procedures[NFSPROC4_CLNT_CB_RECALL],
 		.rpc_cred = callback_cred
 	};
-	int status;
 
-	if (clnt == NULL)
+	if (clnt == NULL) {
+		nfs4_put_delegation(dp);
 		return; /* Client is shutting down; give up. */
+	}
 
 	args->args_op = dp;
 	msg.rpc_argp = args;
 	dp->dl_retries = 1;
-	status = rpc_call_async(clnt, &msg, RPC_TASK_SOFT,
-				&nfsd4_cb_recall_ops, dp);
-	if (status)
-		nfs4_put_delegation(dp);
+	rpc_call_async(clnt, &msg, RPC_TASK_SOFT, &nfsd4_cb_recall_ops, dp);
 }
 
 void nfsd4_do_callback_rpc(struct work_struct *w)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 4a273475877..2e7357104cf 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -51,7 +51,6 @@ static time_t boot_time;
 static u32 current_ownerid = 1;
 static u32 current_fileid = 1;
 static u32 current_delegid = 1;
-static u32 nfs4_init;
 static stateid_t zerostateid;             /* bits all 0 */
 static stateid_t onestateid;              /* bits all 1 */
 static u64 current_sessionid = 1;
@@ -163,6 +162,46 @@ static struct list_head	ownerstr_hashtbl[OWNER_HASH_SIZE];
 static struct list_head file_hashtbl[FILE_HASH_SIZE];
 static struct list_head stateid_hashtbl[STATEID_HASH_SIZE];
 
+static void __nfs4_file_get_access(struct nfs4_file *fp, int oflag)
+{
+	BUG_ON(!(fp->fi_fds[oflag] || fp->fi_fds[O_RDWR]));
+	atomic_inc(&fp->fi_access[oflag]);
+}
+
+static void nfs4_file_get_access(struct nfs4_file *fp, int oflag)
+{
+	if (oflag == O_RDWR) {
+		__nfs4_file_get_access(fp, O_RDONLY);
+		__nfs4_file_get_access(fp, O_WRONLY);
+	} else
+		__nfs4_file_get_access(fp, oflag);
+}
+
+static void nfs4_file_put_fd(struct nfs4_file *fp, int oflag)
+{
+	if (fp->fi_fds[oflag]) {
+		fput(fp->fi_fds[oflag]);
+		fp->fi_fds[oflag] = NULL;
+	}
+}
+
+static void __nfs4_file_put_access(struct nfs4_file *fp, int oflag)
+{
+	if (atomic_dec_and_test(&fp->fi_access[oflag])) {
+		nfs4_file_put_fd(fp, O_RDWR);
+		nfs4_file_put_fd(fp, oflag);
+	}
+}
+
+static void nfs4_file_put_access(struct nfs4_file *fp, int oflag)
+{
+	if (oflag == O_RDWR) {
+		__nfs4_file_put_access(fp, O_RDONLY);
+		__nfs4_file_put_access(fp, O_WRONLY);
+	} else
+		__nfs4_file_put_access(fp, oflag);
+}
+
 static struct nfs4_delegation *
 alloc_init_deleg(struct nfs4_client *clp, struct nfs4_stateid *stp, struct svc_fh *current_fh, u32 type)
 {
@@ -171,6 +210,13 @@ alloc_init_deleg(struct nfs4_client *clp, struct nfs4_stateid *stp, struct svc_f
 	struct nfs4_cb_conn *cb = &stp->st_stateowner->so_client->cl_cb_conn;
 
 	dprintk("NFSD alloc_init_deleg\n");
+	/*
+	 * Major work on the lease subsystem (for example, to support
+	 * calbacks on stat) will be required before we can support
+	 * write delegations properly.
+	 */
+	if (type != NFS4_OPEN_DELEGATE_READ)
+		return NULL;
 	if (fp->fi_had_conflict)
 		return NULL;
 	if (num_delegations > max_delegations)
@@ -185,9 +231,8 @@ alloc_init_deleg(struct nfs4_client *clp, struct nfs4_stateid *stp, struct svc_f
 	dp->dl_client = clp;
 	get_nfs4_file(fp);
 	dp->dl_file = fp;
+	nfs4_file_get_access(fp, O_RDONLY);
 	dp->dl_flock = NULL;
-	get_file(stp->st_vfs_file);
-	dp->dl_vfs_file = stp->st_vfs_file;
 	dp->dl_type = type;
 	dp->dl_ident = cb->cb_ident;
 	dp->dl_stateid.si_boot = boot_time;
@@ -222,15 +267,12 @@ nfs4_put_delegation(struct nfs4_delegation *dp)
 static void
 nfs4_close_delegation(struct nfs4_delegation *dp)
 {
-	struct file *filp = dp->dl_vfs_file;
+	struct file *filp = find_readable_file(dp->dl_file);
 
 	dprintk("NFSD: close_delegation dp %p\n",dp);
-	dp->dl_vfs_file = NULL;
-	/* The following nfsd_close may not actually close the file,
-	 * but we want to remove the lease in any case. */
 	if (dp->dl_flock)
 		vfs_setlease(filp, F_UNLCK, &dp->dl_flock);
-	nfsd_close(filp);
+	nfs4_file_put_access(dp->dl_file, O_RDONLY);
 }
 
 /* Called under the state lock. */
@@ -302,8 +344,12 @@ static void free_generic_stateid(struct nfs4_stateid *stp)
 
 static void release_lock_stateid(struct nfs4_stateid *stp)
 {
+	struct file *file;
+
 	unhash_generic_stateid(stp);
-	locks_remove_posix(stp->st_vfs_file, (fl_owner_t)stp->st_stateowner);
+	file = find_any_file(stp->st_file);
+	if (file)
+		locks_remove_posix(file, (fl_owner_t)stp->st_stateowner);
 	free_generic_stateid(stp);
 }
 
@@ -341,11 +387,85 @@ release_stateid_lockowners(struct nfs4_stateid *open_stp)
 	}
 }
 
+/*
+ * We store the NONE, READ, WRITE, and BOTH bits separately in the
+ * st_{access,deny}_bmap field of the stateid, in order to track not
+ * only what share bits are currently in force, but also what
+ * combinations of share bits previous opens have used.  This allows us
+ * to enforce the recommendation of rfc 3530 14.2.19 that the server
+ * return an error if the client attempt to downgrade to a combination
+ * of share bits not explicable by closing some of its previous opens.
+ *
+ * XXX: This enforcement is actually incomplete, since we don't keep
+ * track of access/deny bit combinations; so, e.g., we allow:
+ *
+ *	OPEN allow read, deny write
+ *	OPEN allow both, deny none
+ *	DOWNGRADE allow read, deny none
+ *
+ * which we should reject.
+ */
+static void
+set_access(unsigned int *access, unsigned long bmap) {
+	int i;
+
+	*access = 0;
+	for (i = 1; i < 4; i++) {
+		if (test_bit(i, &bmap))
+			*access |= i;
+	}
+}
+
+static void
+set_deny(unsigned int *deny, unsigned long bmap) {
+	int i;
+
+	*deny = 0;
+	for (i = 0; i < 4; i++) {
+		if (test_bit(i, &bmap))
+			*deny |= i ;
+	}
+}
+
+static int
+test_share(struct nfs4_stateid *stp, struct nfsd4_open *open) {
+	unsigned int access, deny;
+
+	set_access(&access, stp->st_access_bmap);
+	set_deny(&deny, stp->st_deny_bmap);
+	if ((access & open->op_share_deny) || (deny & open->op_share_access))
+		return 0;
+	return 1;
+}
+
+static int nfs4_access_to_omode(u32 access)
+{
+	switch (access) {
+	case NFS4_SHARE_ACCESS_READ:
+		return O_RDONLY;
+	case NFS4_SHARE_ACCESS_WRITE:
+		return O_WRONLY;
+	case NFS4_SHARE_ACCESS_BOTH:
+		return O_RDWR;
+	}
+	BUG();
+}
+
+static int nfs4_access_bmap_to_omode(struct nfs4_stateid *stp)
+{
+	unsigned int access;
+
+	set_access(&access, stp->st_access_bmap);
+	return nfs4_access_to_omode(access);
+}
+
 static void release_open_stateid(struct nfs4_stateid *stp)
 {
+	int oflag = nfs4_access_bmap_to_omode(stp);
+
 	unhash_generic_stateid(stp);
 	release_stateid_lockowners(stp);
-	nfsd_close(stp->st_vfs_file);
+	nfs4_file_put_access(stp->st_file, oflag);
 	free_generic_stateid(stp);
 }
 
@@ -457,7 +577,7 @@ static int set_forechannel_drc_size(struct nfsd4_channel_attrs *fchan)
 	spin_unlock(&nfsd_drc_lock);
 
 	if (fchan->maxreqs == 0)
-		return nfserr_serverfault;
+		return nfserr_jukebox;
 
 	fchan->maxresp_cached = size + NFSD_MIN_HDR_SEQ_SZ;
 	return 0;
@@ -542,7 +662,7 @@ alloc_init_session(struct svc_rqst *rqstp, struct nfs4_client *clp,
 	BUILD_BUG_ON(NFSD_MAX_SLOTS_PER_SESSION * sizeof(struct nfsd4_slot)
 		     + sizeof(struct nfsd4_session) > PAGE_SIZE);
 
-	status = nfserr_serverfault;
+	status = nfserr_jukebox;
 	/* allocate struct nfsd4_session and slot table pointers in one piece */
 	slotsize = tmp.se_fchannel.maxreqs * sizeof(struct nfsd4_slot *);
 	new = kzalloc(sizeof(*new) + slotsize, GFP_KERNEL);
@@ -591,10 +711,8 @@ find_in_sessionid_hashtbl(struct nfs4_sessionid *sessionid)
 
 	dump_sessionid(__func__, sessionid);
 	idx = hash_sessionid(sessionid);
-	dprintk("%s: idx is %d\n", __func__, idx);
 	/* Search in the appropriate list */
 	list_for_each_entry(elem, &sessionid_hashtbl[idx], se_hash) {
-		dump_sessionid("list traversal", &elem->se_sessionid);
 		if (!memcmp(elem->se_sessionid.data, sessionid->data,
 			    NFS4_MAX_SESSIONID_LEN)) {
 			return elem;
@@ -714,7 +832,6 @@ release_session_client(struct nfsd4_session *session)
 	} else
 		renew_client_locked(clp);
 	spin_unlock(&client_lock);
-	nfsd4_put_session(session);
 }
 
 /* must be called under the client_lock */
@@ -1220,7 +1337,7 @@ out_new:
 	/* Normal case */
 	new = create_client(exid->clname, dname, rqstp, &verf);
 	if (new == NULL) {
-		status = nfserr_serverfault;
+		status = nfserr_jukebox;
 		goto out;
 	}
 
@@ -1760,6 +1877,8 @@ alloc_init_file(struct inode *ino)
 		fp->fi_inode = igrab(ino);
 		fp->fi_id = current_fileid++;
 		fp->fi_had_conflict = false;
+		memset(fp->fi_fds, 0, sizeof(fp->fi_fds));
+		memset(fp->fi_access, 0, sizeof(fp->fi_access));
 		spin_lock(&recall_lock);
 		list_add(&fp->fi_hash, &file_hashtbl[hashval]);
 		spin_unlock(&recall_lock);
@@ -1971,57 +2090,6 @@ static inline int deny_valid(u32 x)
 }
 
 /*
- * We store the NONE, READ, WRITE, and BOTH bits separately in the
- * st_{access,deny}_bmap field of the stateid, in order to track not
- * only what share bits are currently in force, but also what
- * combinations of share bits previous opens have used.  This allows us
- * to enforce the recommendation of rfc 3530 14.2.19 that the server
- * return an error if the client attempt to downgrade to a combination
- * of share bits not explicable by closing some of its previous opens.
- *
- * XXX: This enforcement is actually incomplete, since we don't keep
- * track of access/deny bit combinations; so, e.g., we allow:
- *
- *	OPEN allow read, deny write
- *	OPEN allow both, deny none
- *	DOWNGRADE allow read, deny none
- *
- * which we should reject.
- */
-static void
-set_access(unsigned int *access, unsigned long bmap) {
-	int i;
-
-	*access = 0;
-	for (i = 1; i < 4; i++) {
-		if (test_bit(i, &bmap))
-			*access |= i;
-	}
-}
-
-static void
-set_deny(unsigned int *deny, unsigned long bmap) {
-	int i;
-
-	*deny = 0;
-	for (i = 0; i < 4; i++) {
-		if (test_bit(i, &bmap))
-			*deny |= i ;
-	}
-}
-
-static int
-test_share(struct nfs4_stateid *stp, struct nfsd4_open *open) {
-	unsigned int access, deny;
-
-	set_access(&access, stp->st_access_bmap);
-	set_deny(&deny, stp->st_deny_bmap);
-	if ((access & open->op_share_deny) || (deny & open->op_share_access))
-		return 0;
-	return 1;
-}
-
-/*
  * Called to check deny when READ with all zero stateid or
  * WRITE with all zero or all one stateid
  */
@@ -2052,14 +2120,12 @@ out:
 }
 
 static inline void
-nfs4_file_downgrade(struct file *filp, unsigned int share_access)
+nfs4_file_downgrade(struct nfs4_file *fp, unsigned int share_access)
 {
-	if (share_access & NFS4_SHARE_ACCESS_WRITE) {
-		drop_file_write_access(filp);
-		spin_lock(&filp->f_lock);
-		filp->f_mode = (filp->f_mode | FMODE_READ) & ~FMODE_WRITE;
-		spin_unlock(&filp->f_lock);
-	}
+	if (share_access & NFS4_SHARE_ACCESS_WRITE)
+		nfs4_file_put_access(fp, O_WRONLY);
+	if (share_access & NFS4_SHARE_ACCESS_READ)
+		nfs4_file_put_access(fp, O_RDONLY);
 }
 
 /*
@@ -2255,6 +2321,13 @@ find_delegation_file(struct nfs4_file *fp, stateid_t *stid)
 	return NULL;
 }
 
+int share_access_to_flags(u32 share_access)
+{
+	share_access &= ~NFS4_SHARE_WANT_MASK;
+
+	return share_access == NFS4_SHARE_ACCESS_READ ? RD_STATE : WR_STATE;
+}
+
 static __be32
 nfs4_check_deleg(struct nfs4_file *fp, struct nfsd4_open *open,
 		struct nfs4_delegation **dp)
@@ -2265,8 +2338,7 @@ nfs4_check_deleg(struct nfs4_file *fp, struct nfsd4_open *open,
 	*dp = find_delegation_file(fp, &open->op_delegate_stateid);
 	if (*dp == NULL)
 		goto out;
-	flags = open->op_share_access == NFS4_SHARE_ACCESS_READ ?
-						RD_STATE : WR_STATE;
+	flags = share_access_to_flags(open->op_share_access);
 	status = nfs4_check_delegmode(*dp, flags);
 	if (status)
 		*dp = NULL;
@@ -2308,30 +2380,53 @@ nfs4_alloc_stateid(void)
 	return kmem_cache_alloc(stateid_slab, GFP_KERNEL);
 }
 
+static inline int nfs4_access_to_access(u32 nfs4_access)
+{
+	int flags = 0;
+
+	if (nfs4_access & NFS4_SHARE_ACCESS_READ)
+		flags |= NFSD_MAY_READ;
+	if (nfs4_access & NFS4_SHARE_ACCESS_WRITE)
+		flags |= NFSD_MAY_WRITE;
+	return flags;
+}
+
+static __be32 nfs4_get_vfs_file(struct svc_rqst *rqstp, struct nfs4_file
+*fp, struct svc_fh *cur_fh, u32 nfs4_access)
+{
+	__be32 status;
+	int oflag = nfs4_access_to_omode(nfs4_access);
+	int access = nfs4_access_to_access(nfs4_access);
+
+	if (!fp->fi_fds[oflag]) {
+		status = nfsd_open(rqstp, cur_fh, S_IFREG, access,
+			&fp->fi_fds[oflag]);
+		if (status == nfserr_dropit)
+			status = nfserr_jukebox;
+		if (status)
+			return status;
+	}
+	nfs4_file_get_access(fp, oflag);
+
+	return nfs_ok;
+}
+
 static __be32
 nfs4_new_open(struct svc_rqst *rqstp, struct nfs4_stateid **stpp,
-		struct nfs4_delegation *dp,
-		struct svc_fh *cur_fh, int flags)
+		struct nfs4_file *fp, struct svc_fh *cur_fh,
+		struct nfsd4_open *open)
 {
 	struct nfs4_stateid *stp;
+	__be32 status;
 
 	stp = nfs4_alloc_stateid();
 	if (stp == NULL)
 		return nfserr_resource;
 
-	if (dp) {
-		get_file(dp->dl_vfs_file);
-		stp->st_vfs_file = dp->dl_vfs_file;
-	} else {
-		__be32 status;
-		status = nfsd_open(rqstp, cur_fh, S_IFREG, flags,
-				&stp->st_vfs_file);
-		if (status) {
-			if (status == nfserr_dropit)
-				status = nfserr_jukebox;
-			kmem_cache_free(stateid_slab, stp);
-			return status;
-		}
+	status = nfs4_get_vfs_file(rqstp, fp, cur_fh, open->op_share_access);
+	if (status) {
+		kmem_cache_free(stateid_slab, stp);
+		return status;
 	}
 	*stpp = stp;
 	return 0;
@@ -2353,35 +2448,30 @@ nfsd4_truncate(struct svc_rqst *rqstp, struct svc_fh *fh,
 }
 
 static __be32
-nfs4_upgrade_open(struct svc_rqst *rqstp, struct svc_fh *cur_fh, struct nfs4_stateid *stp, struct nfsd4_open *open)
+nfs4_upgrade_open(struct svc_rqst *rqstp, struct nfs4_file *fp, struct svc_fh *cur_fh, struct nfs4_stateid *stp, struct nfsd4_open *open)
 {
-	struct file *filp = stp->st_vfs_file;
-	struct inode *inode = filp->f_path.dentry->d_inode;
-	unsigned int share_access, new_writer;
+	u32 op_share_access, new_access;
 	__be32 status;
 
-	set_access(&share_access, stp->st_access_bmap);
-	new_writer = (~share_access) & open->op_share_access
-			& NFS4_SHARE_ACCESS_WRITE;
-
-	if (new_writer) {
-		int err = get_write_access(inode);
-		if (err)
-			return nfserrno(err);
-		err = mnt_want_write(cur_fh->fh_export->ex_path.mnt);
-		if (err)
-			return nfserrno(err);
-		file_take_write(filp);
+	set_access(&new_access, stp->st_access_bmap);
+	new_access = (~new_access) & open->op_share_access & ~NFS4_SHARE_WANT_MASK;
+
+	if (new_access) {
+		status = nfs4_get_vfs_file(rqstp, fp, cur_fh, new_access);
+		if (status)
+			return status;
 	}
 	status = nfsd4_truncate(rqstp, cur_fh, open);
 	if (status) {
-		if (new_writer)
-			put_write_access(inode);
+		if (new_access) {
+			int oflag = nfs4_access_to_omode(new_access);
+			nfs4_file_put_access(fp, oflag);
+		}
 		return status;
 	}
 	/* remember the open */
-	filp->f_mode |= open->op_share_access;
-	__set_bit(open->op_share_access, &stp->st_access_bmap);
+	op_share_access = open->op_share_access & ~NFS4_SHARE_WANT_MASK;
+	__set_bit(op_share_access, &stp->st_access_bmap);
 	__set_bit(open->op_share_deny, &stp->st_deny_bmap);
 
 	return nfs_ok;
@@ -2444,13 +2534,14 @@ nfs4_open_delegation(struct svc_fh *fh, struct nfsd4_open *open, struct nfs4_sta
 	fl.fl_type = flag == NFS4_OPEN_DELEGATE_READ? F_RDLCK: F_WRLCK;
 	fl.fl_end = OFFSET_MAX;
 	fl.fl_owner =  (fl_owner_t)dp;
-	fl.fl_file = stp->st_vfs_file;
+	fl.fl_file = find_readable_file(stp->st_file);
+	BUG_ON(!fl.fl_file);
 	fl.fl_pid = current->tgid;
 
 	/* vfs_setlease checks to see if delegation should be handed out.
 	 * the lock_manager callbacks fl_mylease and fl_change are used
 	 */
-	if ((status = vfs_setlease(stp->st_vfs_file, fl.fl_type, &flp))) {
+	if ((status = vfs_setlease(fl.fl_file, fl.fl_type, &flp))) {
 		dprintk("NFSD: setlease failed [%d], no delegation\n", status);
 		unhash_delegation(dp);
 		flag = NFS4_OPEN_DELEGATE_NONE;
@@ -2514,18 +2605,12 @@ nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nf
 	 */
 	if (stp) {
 		/* Stateid was found, this is an OPEN upgrade */
-		status = nfs4_upgrade_open(rqstp, current_fh, stp, open);
+		status = nfs4_upgrade_open(rqstp, fp, current_fh, stp, open);
 		if (status)
 			goto out;
 		update_stateid(&stp->st_stateid);
 	} else {
-		/* Stateid was not found, this is a new OPEN */
-		int flags = 0;
-		if (open->op_share_access & NFS4_SHARE_ACCESS_READ)
-			flags |= NFSD_MAY_READ;
-		if (open->op_share_access & NFS4_SHARE_ACCESS_WRITE)
-			flags |= NFSD_MAY_WRITE;
-		status = nfs4_new_open(rqstp, &stp, dp, current_fh, flags);
+		status = nfs4_new_open(rqstp, &stp, fp, current_fh, open);
 		if (status)
 			goto out;
 		init_stateid(stp, fp, open);
@@ -2727,7 +2812,7 @@ search_close_lru(u32 st_id, int flags)
 static inline int
 nfs4_check_fh(struct svc_fh *fhp, struct nfs4_stateid *stp)
 {
-	return fhp->fh_dentry->d_inode != stp->st_vfs_file->f_path.dentry->d_inode;
+	return fhp->fh_dentry->d_inode != stp->st_file->fi_inode;
 }
 
 static int
@@ -2760,6 +2845,9 @@ __be32 nfs4_check_openmode(struct nfs4_stateid *stp, int flags)
 {
         __be32 status = nfserr_openmode;
 
+	/* For lock stateid's, we test the parent open, not the lock: */
+	if (stp->st_openstp)
+		stp = stp->st_openstp;
 	if ((flags & WR_STATE) && (!access_permit_write(stp->st_access_bmap)))
                 goto out;
 	if ((flags & RD_STATE) && (!access_permit_read(stp->st_access_bmap)))
@@ -2872,7 +2960,8 @@ nfs4_preprocess_stateid_op(struct nfsd4_compound_state *cstate,
 			goto out;
 		renew_client(dp->dl_client);
 		if (filpp)
-			*filpp = dp->dl_vfs_file;
+			*filpp = find_readable_file(dp->dl_file);
+		BUG_ON(!*filpp);
 	} else { /* open or lock stateid */
 		stp = find_stateid(stateid, flags);
 		if (!stp)
@@ -2889,8 +2978,13 @@ nfs4_preprocess_stateid_op(struct nfsd4_compound_state *cstate,
 		if (status)
 			goto out;
 		renew_client(stp->st_stateowner->so_client);
-		if (filpp)
-			*filpp = stp->st_vfs_file;
+		if (filpp) {
+			if (flags & RD_STATE)
+				*filpp = find_readable_file(stp->st_file);
+			else
+				*filpp = find_writeable_file(stp->st_file);
+			BUG_ON(!*filpp); /* assured by check_openmode */
+		}
 	}
 	status = nfs_ok;
 out:
@@ -3126,8 +3220,7 @@ nfsd4_open_downgrade(struct svc_rqst *rqstp,
 		goto out;
 	}
 	set_access(&share_access, stp->st_access_bmap);
-	nfs4_file_downgrade(stp->st_vfs_file,
-	                    share_access & ~od->od_share_access);
+	nfs4_file_downgrade(stp->st_file, share_access & ~od->od_share_access);
 
 	reset_union_bmap_access(od->od_share_access, &stp->st_access_bmap);
 	reset_union_bmap_deny(od->od_share_deny, &stp->st_deny_bmap);
@@ -3346,11 +3439,9 @@ static inline void
 nfs4_set_lock_denied(struct file_lock *fl, struct nfsd4_lock_denied *deny)
 {
 	struct nfs4_stateowner *sop;
-	unsigned int hval;
 
 	if (fl->fl_lmops == &nfsd_posix_mng_ops) {
 		sop = (struct nfs4_stateowner *) fl->fl_owner;
-		hval = lockownerid_hashval(sop->so_id);
 		kref_get(&sop->so_ref);
 		deny->ld_sop = sop;
 		deny->ld_clientid = sop->so_client->cl_clientid;
@@ -3446,8 +3537,6 @@ alloc_init_lock_stateid(struct nfs4_stateowner *sop, struct nfs4_file *fp, struc
 	stp->st_stateid.si_stateownerid = sop->so_id;
 	stp->st_stateid.si_fileid = fp->fi_id;
 	stp->st_stateid.si_generation = 0;
-	stp->st_vfs_file = open_stp->st_vfs_file; /* FIXME refcount?? */
-	stp->st_access_bmap = open_stp->st_access_bmap;
 	stp->st_deny_bmap = open_stp->st_deny_bmap;
 	stp->st_openstp = open_stp;
 
@@ -3547,7 +3636,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 		lock_sop = lock->lk_replay_owner;
 	}
 	/* lock->lk_replay_owner and lock_stp have been created or found */
-	filp = lock_stp->st_vfs_file;
 
 	status = nfserr_grace;
 	if (locks_in_grace() && !lock->lk_reclaim)
@@ -3560,11 +3648,13 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 	switch (lock->lk_type) {
 		case NFS4_READ_LT:
 		case NFS4_READW_LT:
+			filp = find_readable_file(lock_stp->st_file);
 			file_lock.fl_type = F_RDLCK;
 			cmd = F_SETLK;
 		break;
 		case NFS4_WRITE_LT:
 		case NFS4_WRITEW_LT:
+			filp = find_writeable_file(lock_stp->st_file);
 			file_lock.fl_type = F_WRLCK;
 			cmd = F_SETLK;
 		break;
@@ -3572,6 +3662,10 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 			status = nfserr_inval;
 		goto out;
 	}
+	if (!filp) {
+		status = nfserr_openmode;
+		goto out;
+	}
 	file_lock.fl_owner = (fl_owner_t)lock_sop;
 	file_lock.fl_pid = current->tgid;
 	file_lock.fl_file = filp;
@@ -3740,7 +3834,11 @@ nfsd4_locku(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,
 					&locku->lu_stateowner, &stp, NULL)))
 		goto out;
 
-	filp = stp->st_vfs_file;
+	filp = find_any_file(stp->st_file);
+	if (!filp) {
+		status = nfserr_lock_range;
+		goto out;
+	}
 	BUG_ON(!filp);
 	locks_init_lock(&file_lock);
 	file_lock.fl_type = F_UNLCK;
@@ -3787,10 +3885,10 @@ out_nfserr:
  * 	0: no locks held by lockowner
  */
 static int
-check_for_locks(struct file *filp, struct nfs4_stateowner *lowner)
+check_for_locks(struct nfs4_file *filp, struct nfs4_stateowner *lowner)
 {
 	struct file_lock **flpp;
-	struct inode *inode = filp->f_path.dentry->d_inode;
+	struct inode *inode = filp->fi_inode;
 	int status = 0;
 
 	lock_kernel();
@@ -3841,7 +3939,7 @@ nfsd4_release_lockowner(struct svc_rqst *rqstp,
 				continue;
 			list_for_each_entry(stp, &sop->so_stateids,
 					st_perstateowner) {
-				if (check_for_locks(stp->st_vfs_file, sop))
+				if (check_for_locks(stp->st_file, sop))
 					goto out;
 				/* Note: so_perclient unused for lockowners,
 				 * so it's OK to fool with here. */
@@ -4066,16 +4164,8 @@ out_free_laundry:
 int
 nfs4_state_start(void)
 {
-	int ret;
-
-	if (nfs4_init)
-		return 0;
 	nfsd4_load_reboot_recovery_data();
-	ret = __nfs4_state_start();
-	if (ret)
-		return ret;
-	nfs4_init = 1;
-	return 0;
+	return __nfs4_state_start();
 }
 
 static void
@@ -4110,7 +4200,6 @@ __nfs4_state_shutdown(void)
 	}
 
 	nfsd4_shutdown_recdir();
-	nfs4_init = 0;
 }
 
 void
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index ac17a708023..f8931acb05f 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2630,7 +2630,7 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, __be32 nfserr,
 	}
 	read->rd_vlen = v;
 
-	nfserr = nfsd_read(read->rd_rqstp, read->rd_fhp, read->rd_filp,
+	nfserr = nfsd_read_file(read->rd_rqstp, read->rd_fhp, read->rd_filp,
 			read->rd_offset, resp->rqstp->rq_vec, read->rd_vlen,
 			&maxcount);
 
@@ -3325,6 +3325,7 @@ nfs4svc_encode_compoundres(struct svc_rqst *rqstp, __be32 *p, struct nfsd4_compo
 		}
 		/* Renew the clientid on success and on replay */
 		release_session_client(cs->session);
+		nfsd4_put_session(cs->session);
 	}
 	return 1;
 }
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 508941c23af..b53b1d042f1 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -949,15 +949,12 @@ static ssize_t __write_ports_addfd(char *buf)
 	if (err != 0)
 		return err;
 
-	err = lockd_up();
-	if (err != 0)
-		goto out;
-
 	err = svc_addsock(nfsd_serv, fd, buf, SIMPLE_TRANSACTION_LIMIT);
-	if (err < 0)
-		lockd_down();
+	if (err < 0) {
+		svc_destroy(nfsd_serv);
+		return err;
+	}
 
-out:
 	/* Decrease the count, but don't shut down the service */
 	nfsd_serv->sv_nrthreads--;
 	return err;
@@ -978,9 +975,6 @@ static ssize_t __write_ports_delfd(char *buf)
 	if (nfsd_serv != NULL)
 		len = svc_sock_names(nfsd_serv, buf,
 					SIMPLE_TRANSACTION_LIMIT, toclose);
-	if (len >= 0)
-		lockd_down();
-
 	kfree(toclose);
 	return len;
 }
@@ -1014,6 +1008,9 @@ static ssize_t __write_ports_addxprt(char *buf)
 				PF_INET6, port, SVC_SOCK_ANONYMOUS);
 	if (err < 0 && err != -EAFNOSUPPORT)
 		goto out_close;
+
+	/* Decrease the count, but don't shut down the service */
+	nfsd_serv->sv_nrthreads--;
 	return 0;
 out_close:
 	xprt = svc_find_xprt(nfsd_serv, transport, PF_INET, port);
@@ -1022,8 +1019,7 @@ out_close:
 		svc_xprt_put(xprt);
 	}
 out_err:
-	/* Decrease the count, but don't shut down the service */
-	nfsd_serv->sv_nrthreads--;
+	svc_destroy(nfsd_serv);
 	return err;
 }
 
@@ -1194,7 +1190,7 @@ static ssize_t write_maxblksize(struct file *file, char *buf, size_t size)
 			bsize = NFSSVC_MAXBLKSIZE;
 		bsize &= ~(1024-1);
 		mutex_lock(&nfsd_mutex);
-		if (nfsd_serv && nfsd_serv->sv_nrthreads) {
+		if (nfsd_serv) {
 			mutex_unlock(&nfsd_mutex);
 			return -EBUSY;
 		}
@@ -1310,6 +1306,8 @@ static ssize_t __write_recoverydir(struct file *file, char *buf, size_t size)
 			return -EINVAL;
 
 		status = nfs4_reset_recoverydir(recdir);
+		if (status)
+			return status;
 	}
 
 	return scnprintf(buf, SIMPLE_TRANSACTION_LIMIT, "%s\n",
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 72377761270..b76ac3a82e3 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -153,6 +153,7 @@ void		nfsd_lockd_shutdown(void);
 #define nfserr_bad_seqid	cpu_to_be32(NFSERR_BAD_SEQID)
 #define	nfserr_symlink		cpu_to_be32(NFSERR_SYMLINK)
 #define	nfserr_not_same		cpu_to_be32(NFSERR_NOT_SAME)
+#define nfserr_lock_range	cpu_to_be32(NFSERR_LOCK_RANGE)
 #define	nfserr_restorefh	cpu_to_be32(NFSERR_RESTOREFH)
 #define	nfserr_attrnotsupp	cpu_to_be32(NFSERR_ATTRNOTSUPP)
 #define	nfserr_bad_xdr		cpu_to_be32(NFSERR_BAD_XDR)
diff --git a/fs/nfsd/nfsproc.c b/fs/nfsd/nfsproc.c
index a047ad6111e..08e17264784 100644
--- a/fs/nfsd/nfsproc.c
+++ b/fs/nfsd/nfsproc.c
@@ -144,7 +144,7 @@ nfsd_proc_read(struct svc_rqst *rqstp, struct nfsd_readargs *argp,
 	svc_reserve_auth(rqstp, (19<<2) + argp->count + 4);
 
 	resp->count = argp->count;
-	nfserr = nfsd_read(rqstp, fh_copy(&resp->fh, &argp->fh), NULL,
+	nfserr = nfsd_read(rqstp, fh_copy(&resp->fh, &argp->fh),
 				  argp->offset,
 			   	  rqstp->rq_vec, argp->vlen,
 				  &resp->count);
@@ -290,7 +290,6 @@ nfsd_proc_create(struct svc_rqst *rqstp, struct nfsd_createargs *argp,
 	 * gospel of sun micro
 	 */
 	if (type != S_IFREG) {
-		int	is_borc = 0;
 		if (type != S_IFBLK && type != S_IFCHR) {
 			rdev = 0;
 		} else if (type == S_IFCHR && !(attr->ia_valid & ATTR_SIZE)) {
@@ -298,7 +297,6 @@ nfsd_proc_create(struct svc_rqst *rqstp, struct nfsd_createargs *argp,
 			type = S_IFIFO;
 		} else {
 			/* Okay, char or block special */
-			is_borc = 1;
 			if (!rdev)
 				rdev = wanted;
 		}
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 06b2a26edfe..e2c43464f23 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -180,15 +180,80 @@ int nfsd_nrthreads(void)
 	return rv;
 }
 
+static int nfsd_init_socks(int port)
+{
+	int error;
+	if (!list_empty(&nfsd_serv->sv_permsocks))
+		return 0;
+
+	error = svc_create_xprt(nfsd_serv, "udp", PF_INET, port,
+					SVC_SOCK_DEFAULTS);
+	if (error < 0)
+		return error;
+
+	error = svc_create_xprt(nfsd_serv, "tcp", PF_INET, port,
+					SVC_SOCK_DEFAULTS);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static bool nfsd_up = false;
+
+static int nfsd_startup(unsigned short port, int nrservs)
+{
+	int ret;
+
+	if (nfsd_up)
+		return 0;
+	/*
+	 * Readahead param cache - will no-op if it already exists.
+	 * (Note therefore results will be suboptimal if number of
+	 * threads is modified after nfsd start.)
+	 */
+	ret = nfsd_racache_init(2*nrservs);
+	if (ret)
+		return ret;
+	ret = nfsd_init_socks(port);
+	if (ret)
+		goto out_racache;
+	ret = lockd_up();
+	if (ret)
+		goto out_racache;
+	ret = nfs4_state_start();
+	if (ret)
+		goto out_lockd;
+	nfsd_up = true;
+	return 0;
+out_lockd:
+	lockd_down();
+out_racache:
+	nfsd_racache_shutdown();
+	return ret;
+}
+
+static void nfsd_shutdown(void)
+{
+	/*
+	 * write_ports can create the server without actually starting
+	 * any threads--if we get shut down before any threads are
+	 * started, then nfsd_last_thread will be run before any of this
+	 * other initialization has been done.
+	 */
+	if (!nfsd_up)
+		return;
+	nfs4_state_shutdown();
+	lockd_down();
+	nfsd_racache_shutdown();
+	nfsd_up = false;
+}
+
 static void nfsd_last_thread(struct svc_serv *serv)
 {
 	/* When last nfsd thread exits we need to do some clean-up */
-	struct svc_xprt *xprt;
-	list_for_each_entry(xprt, &serv->sv_permsocks, xpt_list)
-		lockd_down();
 	nfsd_serv = NULL;
-	nfsd_racache_shutdown();
-	nfs4_state_shutdown();
+	nfsd_shutdown();
 
 	printk(KERN_WARNING "nfsd: last server has exited, flushing export "
 			    "cache\n");
@@ -263,45 +328,18 @@ int nfsd_create_serv(void)
 		       nfsd_max_blksize >= 8*1024*2)
 			nfsd_max_blksize /= 2;
 	}
+	nfsd_reset_versions();
 
 	nfsd_serv = svc_create_pooled(&nfsd_program, nfsd_max_blksize,
 				      nfsd_last_thread, nfsd, THIS_MODULE);
 	if (nfsd_serv == NULL)
-		err = -ENOMEM;
-	else
-		set_max_drc();
+		return -ENOMEM;
 
+	set_max_drc();
 	do_gettimeofday(&nfssvc_boot);		/* record boot time */
 	return err;
 }
 
-static int nfsd_init_socks(int port)
-{
-	int error;
-	if (!list_empty(&nfsd_serv->sv_permsocks))
-		return 0;
-
-	error = svc_create_xprt(nfsd_serv, "udp", PF_INET, port,
-					SVC_SOCK_DEFAULTS);
-	if (error < 0)
-		return error;
-
-	error = lockd_up();
-	if (error < 0)
-		return error;
-
-	error = svc_create_xprt(nfsd_serv, "tcp", PF_INET, port,
-					SVC_SOCK_DEFAULTS);
-	if (error < 0)
-		return error;
-
-	error = lockd_up();
-	if (error < 0)
-		return error;
-
-	return 0;
-}
-
 int nfsd_nrpools(void)
 {
 	if (nfsd_serv == NULL)
@@ -376,10 +414,16 @@ int nfsd_set_nrthreads(int n, int *nthreads)
 	return err;
 }
 
+/*
+ * Adjust the number of threads and return the new number of threads.
+ * This is also the function that starts the server if necessary, if
+ * this is the first time nrservs is nonzero.
+ */
 int
 nfsd_svc(unsigned short port, int nrservs)
 {
 	int	error;
+	bool	nfsd_up_before;
 
 	mutex_lock(&nfsd_mutex);
 	dprintk("nfsd: creating service\n");
@@ -391,34 +435,29 @@ nfsd_svc(unsigned short port, int nrservs)
 	if (nrservs == 0 && nfsd_serv == NULL)
 		goto out;
 
-	/* Readahead param cache - will no-op if it already exists */
-	error =	nfsd_racache_init(2*nrservs);
-	if (error<0)
-		goto out;
-	error = nfs4_state_start();
+	error = nfsd_create_serv();
 	if (error)
 		goto out;
 
-	nfsd_reset_versions();
-
-	error = nfsd_create_serv();
+	nfsd_up_before = nfsd_up;
 
+	error = nfsd_startup(port, nrservs);
 	if (error)
-		goto out;
-	error = nfsd_init_socks(port);
-	if (error)
-		goto failure;
-
+		goto out_destroy;
 	error = svc_set_num_threads(nfsd_serv, NULL, nrservs);
-	if (error == 0)
-		/* We are holding a reference to nfsd_serv which
-		 * we don't want to count in the return value,
-		 * so subtract 1
-		 */
-		error = nfsd_serv->sv_nrthreads - 1;
- failure:
+	if (error)
+		goto out_shutdown;
+	/* We are holding a reference to nfsd_serv which
+	 * we don't want to count in the return value,
+	 * so subtract 1
+	 */
+	error = nfsd_serv->sv_nrthreads - 1;
+out_shutdown:
+	if (error < 0 && !nfsd_up_before)
+		nfsd_shutdown();
+out_destroy:
 	svc_destroy(nfsd_serv);		/* Release server */
- out:
+out:
 	mutex_unlock(&nfsd_mutex);
 	return error;
 }
diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h
index 006c84230c7..7731a75971d 100644
--- a/fs/nfsd/state.h
+++ b/fs/nfsd/state.h
@@ -88,7 +88,6 @@ struct nfs4_delegation {
 	struct nfs4_client	*dl_client;
 	struct nfs4_file	*dl_file;
 	struct file_lock	*dl_flock;
-	struct file		*dl_vfs_file;
 	u32			dl_type;
 	time_t			dl_time;
 /* For recall: */
@@ -342,12 +341,50 @@ struct nfs4_file {
 	struct list_head        fi_hash;    /* hash by "struct inode *" */
 	struct list_head        fi_stateids;
 	struct list_head	fi_delegations;
+	/* One each for O_RDONLY, O_WRONLY, O_RDWR: */
+	struct file *		fi_fds[3];
+	/* One each for O_RDONLY, O_WRONLY: */
+	atomic_t		fi_access[2];
+	/*
+	 * Each open stateid contributes 1 to either fi_readers or
+	 * fi_writers, or both, depending on the open mode.  A
+	 * delegation also takes an fi_readers reference.  Lock
+	 * stateid's take none.
+	 */
+	atomic_t		fi_readers;
+	atomic_t		fi_writers;
 	struct inode		*fi_inode;
 	u32                     fi_id;      /* used with stateowner->so_id 
 					     * for stateid_hashtbl hash */
 	bool			fi_had_conflict;
 };
 
+/* XXX: for first cut may fall back on returning file that doesn't work
+ * at all? */
+static inline struct file *find_writeable_file(struct nfs4_file *f)
+{
+	if (f->fi_fds[O_RDWR])
+		return f->fi_fds[O_RDWR];
+	return f->fi_fds[O_WRONLY];
+}
+
+static inline struct file *find_readable_file(struct nfs4_file *f)
+{
+	if (f->fi_fds[O_RDWR])
+		return f->fi_fds[O_RDWR];
+	return f->fi_fds[O_RDONLY];
+}
+
+static inline struct file *find_any_file(struct nfs4_file *f)
+{
+	if (f->fi_fds[O_RDWR])
+		return f->fi_fds[O_RDWR];
+	else if (f->fi_fds[O_RDWR])
+		return f->fi_fds[O_WRONLY];
+	else
+		return f->fi_fds[O_RDONLY];
+}
+
 /*
 * nfs4_stateid can either be an open stateid or (eventually) a lock stateid
 *
@@ -373,7 +410,6 @@ struct nfs4_stateid {
 	struct nfs4_stateowner      * st_stateowner;
 	struct nfs4_file            * st_file;
 	stateid_t                     st_stateid;
-	struct file                 * st_vfs_file;
 	unsigned long                 st_access_bmap;
 	unsigned long                 st_deny_bmap;
 	struct nfs4_stateid         * st_openstp;
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 3c111120b61..9df85a13af2 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -604,7 +604,7 @@ nfsd4_get_nfs4_acl(struct svc_rqst *rqstp, struct dentry *dentry, struct nfs4_ac
 	return error;
 }
 
-#endif /* defined(CONFIG_NFS_V4) */
+#endif /* defined(CONFIG_NFSD_V4) */
 
 #ifdef CONFIG_NFSD_V3
 /*
@@ -903,7 +903,6 @@ nfsd_vfs_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
               loff_t offset, struct kvec *vec, int vlen, unsigned long *count)
 {
 	struct inode *inode;
-	struct raparms	*ra;
 	mm_segment_t	oldfs;
 	__be32		err;
 	int		host_err;
@@ -914,12 +913,6 @@ nfsd_vfs_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 	if (svc_msnfs(fhp) && !lock_may_read(inode, offset, *count))
 		goto out;
 
-	/* Get readahead parameters */
-	ra = nfsd_get_raparms(inode->i_sb->s_dev, inode->i_ino);
-
-	if (ra && ra->p_set)
-		file->f_ra = ra->p_ra;
-
 	if (file->f_op->splice_read && rqstp->rq_splice_ok) {
 		struct splice_desc sd = {
 			.len		= 0,
@@ -937,16 +930,6 @@ nfsd_vfs_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 		set_fs(oldfs);
 	}
 
-	/* Write back readahead params */
-	if (ra) {
-		struct raparm_hbucket *rab = &raparm_hash[ra->p_hindex];
-		spin_lock(&rab->pb_lock);
-		ra->p_ra = file->f_ra;
-		ra->p_set = 1;
-		ra->p_count--;
-		spin_unlock(&rab->pb_lock);
-	}
-
 	if (host_err >= 0) {
 		nfsdstats.io_read += host_err;
 		*count = host_err;
@@ -1086,8 +1069,45 @@ out:
  * on entry. On return, *count contains the number of bytes actually read.
  * N.B. After this call fhp needs an fh_put
  */
+__be32 nfsd_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
+	loff_t offset, struct kvec *vec, int vlen, unsigned long *count)
+{
+	struct file *file;
+	struct inode *inode;
+	struct raparms	*ra;
+	__be32 err;
+
+	err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
+	if (err)
+		return err;
+
+	inode = file->f_path.dentry->d_inode;
+
+	/* Get readahead parameters */
+	ra = nfsd_get_raparms(inode->i_sb->s_dev, inode->i_ino);
+
+	if (ra && ra->p_set)
+		file->f_ra = ra->p_ra;
+
+	err = nfsd_vfs_read(rqstp, fhp, file, offset, vec, vlen, count);
+
+	/* Write back readahead params */
+	if (ra) {
+		struct raparm_hbucket *rab = &raparm_hash[ra->p_hindex];
+		spin_lock(&rab->pb_lock);
+		ra->p_ra = file->f_ra;
+		ra->p_set = 1;
+		ra->p_count--;
+		spin_unlock(&rab->pb_lock);
+	}
+
+	nfsd_close(file);
+	return err;
+}
+
+/* As above, but use the provided file descriptor. */
 __be32
-nfsd_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
+nfsd_read_file(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 		loff_t offset, struct kvec *vec, int vlen,
 		unsigned long *count)
 {
@@ -1099,13 +1119,8 @@ nfsd_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file,
 		if (err)
 			goto out;
 		err = nfsd_vfs_read(rqstp, fhp, file, offset, vec, vlen, count);
-	} else {
-		err = nfsd_open(rqstp, fhp, S_IFREG, NFSD_MAY_READ, &file);
-		if (err)
-			goto out;
-		err = nfsd_vfs_read(rqstp, fhp, file, offset, vec, vlen, count);
-		nfsd_close(file);
-	}
+	} else /* Note file may still be NULL in NFSv4 special stateid case: */
+		err = nfsd_read(rqstp, fhp, offset, vec, vlen, count);
 out:
 	return err;
 }
@@ -1631,7 +1646,7 @@ nfsd_link(struct svc_rqst *rqstp, struct svc_fh *ffhp,
 				char *name, int len, struct svc_fh *tfhp)
 {
 	struct dentry	*ddir, *dnew, *dold;
-	struct inode	*dirp, *dest;
+	struct inode	*dirp;
 	__be32		err;
 	int		host_err;
 
@@ -1659,7 +1674,6 @@ nfsd_link(struct svc_rqst *rqstp, struct svc_fh *ffhp,
 		goto out_nfserr;
 
 	dold = tfhp->fh_dentry;
-	dest = dold->d_inode;
 
 	host_err = mnt_want_write(tfhp->fh_export->ex_path.mnt);
 	if (host_err) {
@@ -2038,7 +2052,6 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 					struct dentry *dentry, int acc)
 {
 	struct inode	*inode = dentry->d_inode;
-	struct path	path;
 	int		err;
 
 	if (acc == NFSD_MAY_NOP)
@@ -2111,15 +2124,7 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp,
 	if (err == -EACCES && S_ISREG(inode->i_mode) &&
 	    acc == (NFSD_MAY_READ | NFSD_MAY_OWNER_OVERRIDE))
 		err = inode_permission(inode, MAY_EXEC);
-	if (err)
-		goto nfsd_out;
 
-	/* Do integrity (permission) checking now, but defer incrementing
-	 * IMA counts to the actual file open.
-	 */
-	path.mnt = exp->ex_path.mnt;
-	path.dentry = dentry;
-nfsd_out:
 	return err? nfserrno(err) : 0;
 }
 
diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h
index 217a62c2a35..9a370a5e36b 100644
--- a/fs/nfsd/vfs.h
+++ b/fs/nfsd/vfs.h
@@ -64,7 +64,9 @@ __be32		nfsd_commit(struct svc_rqst *, struct svc_fh *,
 __be32		nfsd_open(struct svc_rqst *, struct svc_fh *, int,
 				int, struct file **);
 void		nfsd_close(struct file *);
-__be32 		nfsd_read(struct svc_rqst *, struct svc_fh *, struct file *,
+__be32 		nfsd_read(struct svc_rqst *, struct svc_fh *,
+				loff_t, struct kvec *, int, unsigned long *);
+__be32 		nfsd_read_file(struct svc_rqst *, struct svc_fh *, struct file *,
 				loff_t, struct kvec *, int, unsigned long *);
 __be32 		nfsd_write(struct svc_rqst *, struct svc_fh *,struct file *,
 				loff_t, struct kvec *,int, unsigned long *, int *);
diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c
index effdbdbe6c1..3dbdc1d356b 100644
--- a/fs/nilfs2/bmap.c
+++ b/fs/nilfs2/bmap.c
@@ -26,6 +26,8 @@
 #include "nilfs.h"
 #include "bmap.h"
 #include "sb.h"
+#include "btree.h"
+#include "direct.h"
 #include "btnode.h"
 #include "mdt.h"
 #include "dat.h"
@@ -533,7 +535,7 @@ void nilfs_bmap_init_gc(struct nilfs_bmap *bmap)
 
 void nilfs_bmap_init_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap)
 {
-	memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union));
+	memcpy(gcbmap, bmap, sizeof(*bmap));
 	init_rwsem(&gcbmap->b_sem);
 	lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 	gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode;
@@ -541,7 +543,7 @@ void nilfs_bmap_init_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap)
 
 void nilfs_bmap_commit_gcdat(struct nilfs_bmap *gcbmap, struct nilfs_bmap *bmap)
 {
-	memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union));
+	memcpy(bmap, gcbmap, sizeof(*bmap));
 	init_rwsem(&bmap->b_sem);
 	lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
 	bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
diff --git a/fs/nilfs2/bmap.h b/fs/nilfs2/bmap.h
index 9980d7dbab9..a20569b1992 100644
--- a/fs/nilfs2/bmap.h
+++ b/fs/nilfs2/bmap.h
@@ -32,11 +32,6 @@
 
 #define NILFS_BMAP_INVALID_PTR	0
 
-#define nilfs_bmap_dkey_to_key(dkey)	le64_to_cpu(dkey)
-#define nilfs_bmap_key_to_dkey(key)	cpu_to_le64(key)
-#define nilfs_bmap_dptr_to_ptr(dptr)	le64_to_cpu(dptr)
-#define nilfs_bmap_ptr_to_dptr(ptr)	cpu_to_le64(ptr)
-
 #define nilfs_bmap_keydiff_abs(diff)	((diff) < 0 ? -(diff) : (diff))
 
 
@@ -71,7 +66,7 @@ struct nilfs_bmap_operations {
 	int (*bop_delete)(struct nilfs_bmap *, __u64);
 	void (*bop_clear)(struct nilfs_bmap *);
 
-	int (*bop_propagate)(const struct nilfs_bmap *, struct buffer_head *);
+	int (*bop_propagate)(struct nilfs_bmap *, struct buffer_head *);
 	void (*bop_lookup_dirty_buffers)(struct nilfs_bmap *,
 					 struct list_head *);
 
@@ -110,6 +105,7 @@ static inline int nilfs_bmap_is_new_ptr(unsigned long ptr)
  * @b_last_allocated_ptr: last allocated ptr for data block
  * @b_ptr_type: pointer type
  * @b_state: state
+ * @b_nchildren_per_block: maximum number of child nodes for non-root nodes
  */
 struct nilfs_bmap {
 	union {
@@ -123,6 +119,7 @@ struct nilfs_bmap {
 	__u64 b_last_allocated_ptr;
 	int b_ptr_type;
 	int b_state;
+	__u16 b_nchildren_per_block;
 };
 
 /* pointer type */
@@ -224,6 +221,13 @@ static inline void nilfs_bmap_abort_end_ptr(struct nilfs_bmap *bmap,
 		nilfs_dat_abort_end(dat, &req->bpr_req);
 }
 
+static inline void nilfs_bmap_set_target_v(struct nilfs_bmap *bmap, __u64 key,
+					   __u64 ptr)
+{
+	bmap->b_last_allocated_key = key;
+	bmap->b_last_allocated_ptr = ptr;
+}
+
 __u64 nilfs_bmap_data_get_key(const struct nilfs_bmap *,
 			      const struct buffer_head *);
 
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 447ce47a330..f78ab1044d1 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -96,10 +96,12 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr)
 }
 
 int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr,
-			      sector_t pblocknr, struct buffer_head **pbh)
+			      sector_t pblocknr, int mode,
+			      struct buffer_head **pbh, sector_t *submit_ptr)
 {
 	struct buffer_head *bh;
 	struct inode *inode = NILFS_BTNC_I(btnc);
+	struct page *page;
 	int err;
 
 	bh = nilfs_grab_buffer(inode, btnc, blocknr, 1 << BH_NILFS_Node);
@@ -107,6 +109,7 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr,
 		return -ENOMEM;
 
 	err = -EEXIST; /* internal code */
+	page = bh->b_page;
 
 	if (buffer_uptodate(bh) || buffer_dirty(bh))
 		goto found;
@@ -125,7 +128,16 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr,
 			}
 		}
 	}
-	lock_buffer(bh);
+
+	if (mode == READA) {
+		if (pblocknr != *submit_ptr + 1 || !trylock_buffer(bh)) {
+			err = -EBUSY; /* internal code */
+			brelse(bh);
+			goto out_locked;
+		}
+	} else { /* mode == READ */
+		lock_buffer(bh);
+	}
 	if (buffer_uptodate(bh)) {
 		unlock_buffer(bh);
 		err = -EEXIST; /* internal code */
@@ -136,15 +148,16 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr,
 	bh->b_blocknr = pblocknr; /* set block address for read */
 	bh->b_end_io = end_buffer_read_sync;
 	get_bh(bh);
-	submit_bh(READ, bh);
+	submit_bh(mode, bh);
 	bh->b_blocknr = blocknr; /* set back to the given block address */
+	*submit_ptr = pblocknr;
 	err = 0;
 found:
 	*pbh = bh;
 
 out_locked:
-	unlock_page(bh->b_page);
-	page_cache_release(bh->b_page);
+	unlock_page(page);
+	page_cache_release(page);
 	return err;
 }
 
diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h
index 07da83f0771..79037494f1e 100644
--- a/fs/nilfs2/btnode.h
+++ b/fs/nilfs2/btnode.h
@@ -42,8 +42,8 @@ void nilfs_btnode_cache_init(struct address_space *, struct backing_dev_info *);
 void nilfs_btnode_cache_clear(struct address_space *);
 struct buffer_head *nilfs_btnode_create_block(struct address_space *btnc,
 					      __u64 blocknr);
-int nilfs_btnode_submit_block(struct address_space *, __u64, sector_t,
-			      struct buffer_head **);
+int nilfs_btnode_submit_block(struct address_space *, __u64, sector_t, int,
+			      struct buffer_head **, sector_t *);
 void nilfs_btnode_delete(struct buffer_head *);
 int nilfs_btnode_prepare_change_key(struct address_space *,
 				    struct nilfs_btnode_chkey_ctxt *);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index b27a342c5af..300c2bc00c3 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -66,30 +66,10 @@ static void nilfs_btree_free_path(struct nilfs_btree_path *path)
 /*
  * B-tree node operations
  */
-static int nilfs_btree_get_block(const struct nilfs_btree *btree, __u64 ptr,
-				 struct buffer_head **bhp)
-{
-	struct address_space *btnc =
-		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
-	int err;
-
-	err = nilfs_btnode_submit_block(btnc, ptr, 0, bhp);
-	if (err)
-		return err == -EEXIST ? 0 : err;
-
-	wait_on_buffer(*bhp);
-	if (!buffer_uptodate(*bhp)) {
-		brelse(*bhp);
-		return -EIO;
-	}
-	return 0;
-}
-
-static int nilfs_btree_get_new_block(const struct nilfs_btree *btree,
+static int nilfs_btree_get_new_block(const struct nilfs_bmap *btree,
 				     __u64 ptr, struct buffer_head **bhp)
 {
-	struct address_space *btnc =
-		&NILFS_BMAP_I((struct nilfs_bmap *)btree)->i_btnode_cache;
+	struct address_space *btnc = &NILFS_BMAP_I(btree)->i_btnode_cache;
 	struct buffer_head *bh;
 
 	bh = nilfs_btnode_create_block(btnc, ptr);
@@ -101,71 +81,55 @@ static int nilfs_btree_get_new_block(const struct nilfs_btree *btree,
 	return 0;
 }
 
-static inline int
-nilfs_btree_node_get_flags(const struct nilfs_btree_node *node)
+static int nilfs_btree_node_get_flags(const struct nilfs_btree_node *node)
 {
 	return node->bn_flags;
 }
 
-static inline void
+static void
 nilfs_btree_node_set_flags(struct nilfs_btree_node *node, int flags)
 {
 	node->bn_flags = flags;
 }
 
-static inline int nilfs_btree_node_root(const struct nilfs_btree_node *node)
+static int nilfs_btree_node_root(const struct nilfs_btree_node *node)
 {
 	return nilfs_btree_node_get_flags(node) & NILFS_BTREE_NODE_ROOT;
 }
 
-static inline int
-nilfs_btree_node_get_level(const struct nilfs_btree_node *node)
+static int nilfs_btree_node_get_level(const struct nilfs_btree_node *node)
 {
 	return node->bn_level;
 }
 
-static inline void
+static void
 nilfs_btree_node_set_level(struct nilfs_btree_node *node, int level)
 {
 	node->bn_level = level;
 }
 
-static inline int
-nilfs_btree_node_get_nchildren(const struct nilfs_btree_node *node)
+static int nilfs_btree_node_get_nchildren(const struct nilfs_btree_node *node)
 {
 	return le16_to_cpu(node->bn_nchildren);
 }
 
-static inline void
+static void
 nilfs_btree_node_set_nchildren(struct nilfs_btree_node *node, int nchildren)
 {
 	node->bn_nchildren = cpu_to_le16(nchildren);
 }
 
-static inline int nilfs_btree_node_size(const struct nilfs_btree *btree)
+static int nilfs_btree_node_size(const struct nilfs_bmap *btree)
 {
-	return 1 << btree->bt_bmap.b_inode->i_blkbits;
+	return 1 << btree->b_inode->i_blkbits;
 }
 
-static inline int
-nilfs_btree_node_nchildren_min(const struct nilfs_btree_node *node,
-			       const struct nilfs_btree *btree)
+static int nilfs_btree_nchildren_per_block(const struct nilfs_bmap *btree)
 {
-	return nilfs_btree_node_root(node) ?
-		NILFS_BTREE_ROOT_NCHILDREN_MIN :
-		NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
+	return btree->b_nchildren_per_block;
 }
 
-static inline int
-nilfs_btree_node_nchildren_max(const struct nilfs_btree_node *node,
-			       const struct nilfs_btree *btree)
-{
-	return nilfs_btree_node_root(node) ?
-		NILFS_BTREE_ROOT_NCHILDREN_MAX :
-		NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(btree));
-}
-
-static inline __le64 *
+static __le64 *
 nilfs_btree_node_dkeys(const struct nilfs_btree_node *node)
 {
 	return (__le64 *)((char *)(node + 1) +
@@ -173,45 +137,40 @@ nilfs_btree_node_dkeys(const struct nilfs_btree_node *node)
 			   0 : NILFS_BTREE_NODE_EXTRA_PAD_SIZE));
 }
 
-static inline __le64 *
-nilfs_btree_node_dptrs(const struct nilfs_btree_node *node,
-		       const struct nilfs_btree *btree)
+static __le64 *
+nilfs_btree_node_dptrs(const struct nilfs_btree_node *node, int ncmax)
 {
-	return (__le64 *)(nilfs_btree_node_dkeys(node) +
-			  nilfs_btree_node_nchildren_max(node, btree));
+	return (__le64 *)(nilfs_btree_node_dkeys(node) + ncmax);
 }
 
-static inline __u64
+static __u64
 nilfs_btree_node_get_key(const struct nilfs_btree_node *node, int index)
 {
-	return nilfs_bmap_dkey_to_key(*(nilfs_btree_node_dkeys(node) + index));
+	return le64_to_cpu(*(nilfs_btree_node_dkeys(node) + index));
 }
 
-static inline void
+static void
 nilfs_btree_node_set_key(struct nilfs_btree_node *node, int index, __u64 key)
 {
-	*(nilfs_btree_node_dkeys(node) + index) = nilfs_bmap_key_to_dkey(key);
+	*(nilfs_btree_node_dkeys(node) + index) = cpu_to_le64(key);
 }
 
-static inline __u64
-nilfs_btree_node_get_ptr(const struct nilfs_btree *btree,
-			 const struct nilfs_btree_node *node, int index)
+static __u64
+nilfs_btree_node_get_ptr(const struct nilfs_btree_node *node, int index,
+			 int ncmax)
 {
-	return nilfs_bmap_dptr_to_ptr(*(nilfs_btree_node_dptrs(node, btree) +
-					index));
+	return le64_to_cpu(*(nilfs_btree_node_dptrs(node, ncmax) + index));
 }
 
-static inline void
-nilfs_btree_node_set_ptr(struct nilfs_btree *btree,
-			 struct nilfs_btree_node *node, int index, __u64 ptr)
+static void
+nilfs_btree_node_set_ptr(struct nilfs_btree_node *node, int index, __u64 ptr,
+			 int ncmax)
 {
-	*(nilfs_btree_node_dptrs(node, btree) + index) =
-		nilfs_bmap_ptr_to_dptr(ptr);
+	*(nilfs_btree_node_dptrs(node, ncmax) + index) = cpu_to_le64(ptr);
 }
 
-static void nilfs_btree_node_init(struct nilfs_btree *btree,
-				  struct nilfs_btree_node *node,
-				  int flags, int level, int nchildren,
+static void nilfs_btree_node_init(struct nilfs_btree_node *node, int flags,
+				  int level, int nchildren, int ncmax,
 				  const __u64 *keys, const __u64 *ptrs)
 {
 	__le64 *dkeys;
@@ -223,29 +182,28 @@ static void nilfs_btree_node_init(struct nilfs_btree *btree,
 	nilfs_btree_node_set_nchildren(node, nchildren);
 
 	dkeys = nilfs_btree_node_dkeys(node);
-	dptrs = nilfs_btree_node_dptrs(node, btree);
+	dptrs = nilfs_btree_node_dptrs(node, ncmax);
 	for (i = 0; i < nchildren; i++) {
-		dkeys[i] = nilfs_bmap_key_to_dkey(keys[i]);
-		dptrs[i] = nilfs_bmap_ptr_to_dptr(ptrs[i]);
+		dkeys[i] = cpu_to_le64(keys[i]);
+		dptrs[i] = cpu_to_le64(ptrs[i]);
 	}
 }
 
 /* Assume the buffer heads corresponding to left and right are locked. */
-static void nilfs_btree_node_move_left(struct nilfs_btree *btree,
-				       struct nilfs_btree_node *left,
+static void nilfs_btree_node_move_left(struct nilfs_btree_node *left,
 				       struct nilfs_btree_node *right,
-				       int n)
+				       int n, int lncmax, int rncmax)
 {
 	__le64 *ldkeys, *rdkeys;
 	__le64 *ldptrs, *rdptrs;
 	int lnchildren, rnchildren;
 
 	ldkeys = nilfs_btree_node_dkeys(left);
-	ldptrs = nilfs_btree_node_dptrs(left, btree);
+	ldptrs = nilfs_btree_node_dptrs(left, lncmax);
 	lnchildren = nilfs_btree_node_get_nchildren(left);
 
 	rdkeys = nilfs_btree_node_dkeys(right);
-	rdptrs = nilfs_btree_node_dptrs(right, btree);
+	rdptrs = nilfs_btree_node_dptrs(right, rncmax);
 	rnchildren = nilfs_btree_node_get_nchildren(right);
 
 	memcpy(ldkeys + lnchildren, rdkeys, n * sizeof(*rdkeys));
@@ -260,21 +218,20 @@ static void nilfs_btree_node_move_left(struct nilfs_btree *btree,
 }
 
 /* Assume that the buffer heads corresponding to left and right are locked. */
-static void nilfs_btree_node_move_right(struct nilfs_btree *btree,
-					struct nilfs_btree_node *left,
+static void nilfs_btree_node_move_right(struct nilfs_btree_node *left,
 					struct nilfs_btree_node *right,
-					int n)
+					int n, int lncmax, int rncmax)
 {
 	__le64 *ldkeys, *rdkeys;
 	__le64 *ldptrs, *rdptrs;
 	int lnchildren, rnchildren;
 
 	ldkeys = nilfs_btree_node_dkeys(left);
-	ldptrs = nilfs_btree_node_dptrs(left, btree);
+	ldptrs = nilfs_btree_node_dptrs(left, lncmax);
 	lnchildren = nilfs_btree_node_get_nchildren(left);
 
 	rdkeys = nilfs_btree_node_dkeys(right);
-	rdptrs = nilfs_btree_node_dptrs(right, btree);
+	rdptrs = nilfs_btree_node_dptrs(right, rncmax);
 	rnchildren = nilfs_btree_node_get_nchildren(right);
 
 	memmove(rdkeys + n, rdkeys, rnchildren * sizeof(*rdkeys));
@@ -289,16 +246,15 @@ static void nilfs_btree_node_move_right(struct nilfs_btree *btree,
 }
 
 /* Assume that the buffer head corresponding to node is locked. */
-static void nilfs_btree_node_insert(struct nilfs_btree *btree,
-				    struct nilfs_btree_node *node,
-				    __u64 key, __u64 ptr, int index)
+static void nilfs_btree_node_insert(struct nilfs_btree_node *node, int index,
+				    __u64 key, __u64 ptr, int ncmax)
 {
 	__le64 *dkeys;
 	__le64 *dptrs;
 	int nchildren;
 
 	dkeys = nilfs_btree_node_dkeys(node);
-	dptrs = nilfs_btree_node_dptrs(node, btree);
+	dptrs = nilfs_btree_node_dptrs(node, ncmax);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	if (index < nchildren) {
 		memmove(dkeys + index + 1, dkeys + index,
@@ -306,16 +262,15 @@ static void nilfs_btree_node_insert(struct nilfs_btree *btree,
 		memmove(dptrs + index + 1, dptrs + index,
 			(nchildren - index) * sizeof(*dptrs));
 	}
-	dkeys[index] = nilfs_bmap_key_to_dkey(key);
-	dptrs[index] = nilfs_bmap_ptr_to_dptr(ptr);
+	dkeys[index] = cpu_to_le64(key);
+	dptrs[index] = cpu_to_le64(ptr);
 	nchildren++;
 	nilfs_btree_node_set_nchildren(node, nchildren);
 }
 
 /* Assume that the buffer head corresponding to node is locked. */
-static void nilfs_btree_node_delete(struct nilfs_btree *btree,
-				    struct nilfs_btree_node *node,
-				    __u64 *keyp, __u64 *ptrp, int index)
+static void nilfs_btree_node_delete(struct nilfs_btree_node *node, int index,
+				    __u64 *keyp, __u64 *ptrp, int ncmax)
 {
 	__u64 key;
 	__u64 ptr;
@@ -324,9 +279,9 @@ static void nilfs_btree_node_delete(struct nilfs_btree *btree,
 	int nchildren;
 
 	dkeys = nilfs_btree_node_dkeys(node);
-	dptrs = nilfs_btree_node_dptrs(node, btree);
-	key = nilfs_bmap_dkey_to_key(dkeys[index]);
-	ptr = nilfs_bmap_dptr_to_ptr(dptrs[index]);
+	dptrs = nilfs_btree_node_dptrs(node, ncmax);
+	key = le64_to_cpu(dkeys[index]);
+	ptr = le64_to_cpu(dptrs[index]);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	if (keyp != NULL)
 		*keyp = key;
@@ -382,40 +337,92 @@ static int nilfs_btree_node_lookup(const struct nilfs_btree_node *node,
 	return s == 0;
 }
 
-static inline struct nilfs_btree_node *
-nilfs_btree_get_root(const struct nilfs_btree *btree)
+/**
+ * nilfs_btree_node_broken - verify consistency of btree node
+ * @node: btree node block to be examined
+ * @size: node size (in bytes)
+ * @blocknr: block number
+ *
+ * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned.
+ */
+static int nilfs_btree_node_broken(const struct nilfs_btree_node *node,
+				   size_t size, sector_t blocknr)
 {
-	return (struct nilfs_btree_node *)btree->bt_bmap.b_u.u_data;
+	int level, flags, nchildren;
+	int ret = 0;
+
+	level = nilfs_btree_node_get_level(node);
+	flags = nilfs_btree_node_get_flags(node);
+	nchildren = nilfs_btree_node_get_nchildren(node);
+
+	if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN ||
+		     level >= NILFS_BTREE_LEVEL_MAX ||
+		     (flags & NILFS_BTREE_NODE_ROOT) ||
+		     nchildren < 0 ||
+		     nchildren > NILFS_BTREE_NODE_NCHILDREN_MAX(size))) {
+		printk(KERN_CRIT "NILFS: bad btree node (blocknr=%llu): "
+		       "level = %d, flags = 0x%x, nchildren = %d\n",
+		       (unsigned long long)blocknr, level, flags, nchildren);
+		ret = 1;
+	}
+	return ret;
 }
 
-static inline struct nilfs_btree_node *
+int nilfs_btree_broken_node_block(struct buffer_head *bh)
+{
+	int ret;
+
+	if (buffer_nilfs_checked(bh))
+		return 0;
+
+	ret = nilfs_btree_node_broken((struct nilfs_btree_node *)bh->b_data,
+				       bh->b_size, bh->b_blocknr);
+	if (likely(!ret))
+		set_buffer_nilfs_checked(bh);
+	return ret;
+}
+
+static struct nilfs_btree_node *
+nilfs_btree_get_root(const struct nilfs_bmap *btree)
+{
+	return (struct nilfs_btree_node *)btree->b_u.u_data;
+}
+
+static struct nilfs_btree_node *
 nilfs_btree_get_nonroot_node(const struct nilfs_btree_path *path, int level)
 {
 	return (struct nilfs_btree_node *)path[level].bp_bh->b_data;
 }
 
-static inline struct nilfs_btree_node *
+static struct nilfs_btree_node *
 nilfs_btree_get_sib_node(const struct nilfs_btree_path *path, int level)
 {
 	return (struct nilfs_btree_node *)path[level].bp_sib_bh->b_data;
 }
 
-static inline int nilfs_btree_height(const struct nilfs_btree *btree)
+static int nilfs_btree_height(const struct nilfs_bmap *btree)
 {
 	return nilfs_btree_node_get_level(nilfs_btree_get_root(btree)) + 1;
 }
 
-static inline struct nilfs_btree_node *
-nilfs_btree_get_node(const struct nilfs_btree *btree,
+static struct nilfs_btree_node *
+nilfs_btree_get_node(const struct nilfs_bmap *btree,
 		     const struct nilfs_btree_path *path,
-		     int level)
+		     int level, int *ncmaxp)
 {
-	return (level == nilfs_btree_height(btree) - 1) ?
-		nilfs_btree_get_root(btree) :
-		nilfs_btree_get_nonroot_node(path, level);
+	struct nilfs_btree_node *node;
+
+	if (level == nilfs_btree_height(btree) - 1) {
+		node = nilfs_btree_get_root(btree);
+		*ncmaxp = NILFS_BTREE_ROOT_NCHILDREN_MAX;
+	} else {
+		node = nilfs_btree_get_nonroot_node(path, level);
+		*ncmaxp = nilfs_btree_nchildren_per_block(btree);
+	}
+	return node;
 }
 
-static inline int
+static int
 nilfs_btree_bad_node(struct nilfs_btree_node *node, int level)
 {
 	if (unlikely(nilfs_btree_node_get_level(node) != level)) {
@@ -427,13 +434,83 @@ nilfs_btree_bad_node(struct nilfs_btree_node *node, int level)
 	return 0;
 }
 
-static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
+struct nilfs_btree_readahead_info {
+	struct nilfs_btree_node *node;	/* parent node */
+	int max_ra_blocks;		/* max nof blocks to read ahead */
+	int index;			/* current index on the parent node */
+	int ncmax;			/* nof children in the parent node */
+};
+
+static int __nilfs_btree_get_block(const struct nilfs_bmap *btree, __u64 ptr,
+				   struct buffer_head **bhp,
+				   const struct nilfs_btree_readahead_info *ra)
+{
+	struct address_space *btnc = &NILFS_BMAP_I(btree)->i_btnode_cache;
+	struct buffer_head *bh, *ra_bh;
+	sector_t submit_ptr = 0;
+	int ret;
+
+	ret = nilfs_btnode_submit_block(btnc, ptr, 0, READ, &bh, &submit_ptr);
+	if (ret) {
+		if (ret != -EEXIST)
+			return ret;
+		goto out_check;
+	}
+
+	if (ra) {
+		int i, n;
+		__u64 ptr2;
+
+		/* read ahead sibling nodes */
+		for (n = ra->max_ra_blocks, i = ra->index + 1;
+		     n > 0 && i < ra->ncmax; n--, i++) {
+			ptr2 = nilfs_btree_node_get_ptr(ra->node, i, ra->ncmax);
+
+			ret = nilfs_btnode_submit_block(btnc, ptr2, 0, READA,
+							&ra_bh, &submit_ptr);
+			if (likely(!ret || ret == -EEXIST))
+				brelse(ra_bh);
+			else if (ret != -EBUSY)
+				break;
+			if (!buffer_locked(bh))
+				goto out_no_wait;
+		}
+	}
+
+	wait_on_buffer(bh);
+
+ out_no_wait:
+	if (!buffer_uptodate(bh)) {
+		brelse(bh);
+		return -EIO;
+	}
+
+ out_check:
+	if (nilfs_btree_broken_node_block(bh)) {
+		clear_buffer_uptodate(bh);
+		brelse(bh);
+		return -EINVAL;
+	}
+
+	*bhp = bh;
+	return 0;
+}
+
+static int nilfs_btree_get_block(const struct nilfs_bmap *btree, __u64 ptr,
+				   struct buffer_head **bhp)
+{
+	return __nilfs_btree_get_block(btree, ptr, bhp, NULL);
+}
+
+static int nilfs_btree_do_lookup(const struct nilfs_bmap *btree,
 				 struct nilfs_btree_path *path,
-				 __u64 key, __u64 *ptrp, int minlevel)
+				 __u64 key, __u64 *ptrp, int minlevel,
+				 int readahead)
 {
 	struct nilfs_btree_node *node;
+	struct nilfs_btree_readahead_info p, *ra;
 	__u64 ptr;
-	int level, index, found, ret;
+	int level, index, found, ncmax, ret;
 
 	node = nilfs_btree_get_root(btree);
 	level = nilfs_btree_node_get_level(node);
@@ -441,14 +518,27 @@ static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
 		return -ENOENT;
 
 	found = nilfs_btree_node_lookup(node, key, &index);
-	ptr = nilfs_btree_node_get_ptr(btree, node, index);
+	ptr = nilfs_btree_node_get_ptr(node, index,
+				       NILFS_BTREE_ROOT_NCHILDREN_MAX);
 	path[level].bp_bh = NULL;
 	path[level].bp_index = index;
 
-	for (level--; level >= minlevel; level--) {
-		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
+	ncmax = nilfs_btree_nchildren_per_block(btree);
+
+	while (--level >= minlevel) {
+		ra = NULL;
+		if (level == NILFS_BTREE_LEVEL_NODE_MIN && readahead) {
+			p.node = nilfs_btree_get_node(btree, path, level + 1,
+						      &p.ncmax);
+			p.index = index;
+			p.max_ra_blocks = 7;
+			ra = &p;
+		}
+		ret = __nilfs_btree_get_block(btree, ptr, &path[level].bp_bh,
+					      ra);
 		if (ret < 0)
 			return ret;
+
 		node = nilfs_btree_get_nonroot_node(path, level);
 		if (nilfs_btree_bad_node(node, level))
 			return -EINVAL;
@@ -456,9 +546,9 @@ static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
 			found = nilfs_btree_node_lookup(node, key, &index);
 		else
 			index = 0;
-		if (index < nilfs_btree_node_nchildren_max(node, btree))
-			ptr = nilfs_btree_node_get_ptr(btree, node, index);
-		else {
+		if (index < ncmax) {
+			ptr = nilfs_btree_node_get_ptr(node, index, ncmax);
+		} else {
 			WARN_ON(found || level != NILFS_BTREE_LEVEL_NODE_MIN);
 			/* insert */
 			ptr = NILFS_BMAP_INVALID_PTR;
@@ -474,22 +564,24 @@ static int nilfs_btree_do_lookup(const struct nilfs_btree *btree,
 	return 0;
 }
 
-static int nilfs_btree_do_lookup_last(const struct nilfs_btree *btree,
+static int nilfs_btree_do_lookup_last(const struct nilfs_bmap *btree,
 				      struct nilfs_btree_path *path,
 				      __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node;
 	__u64 ptr;
-	int index, level, ret;
+	int index, level, ncmax, ret;
 
 	node = nilfs_btree_get_root(btree);
 	index = nilfs_btree_node_get_nchildren(node) - 1;
 	if (index < 0)
 		return -ENOENT;
 	level = nilfs_btree_node_get_level(node);
-	ptr = nilfs_btree_node_get_ptr(btree, node, index);
+	ptr = nilfs_btree_node_get_ptr(node, index,
+				       NILFS_BTREE_ROOT_NCHILDREN_MAX);
 	path[level].bp_bh = NULL;
 	path[level].bp_index = index;
+	ncmax = nilfs_btree_nchildren_per_block(btree);
 
 	for (level--; level > 0; level--) {
 		ret = nilfs_btree_get_block(btree, ptr, &path[level].bp_bh);
@@ -499,7 +591,7 @@ static int nilfs_btree_do_lookup_last(const struct nilfs_btree *btree,
 		if (nilfs_btree_bad_node(node, level))
 			return -EINVAL;
 		index = nilfs_btree_node_get_nchildren(node) - 1;
-		ptr = nilfs_btree_node_get_ptr(btree, node, index);
+		ptr = nilfs_btree_node_get_ptr(node, index, ncmax);
 		path[level].bp_index = index;
 	}
 
@@ -511,51 +603,45 @@ static int nilfs_btree_do_lookup_last(const struct nilfs_btree *btree,
 	return 0;
 }
 
-static int nilfs_btree_lookup(const struct nilfs_bmap *bmap,
+static int nilfs_btree_lookup(const struct nilfs_bmap *btree,
 			      __u64 key, int level, __u64 *ptrp)
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
-	__u64 ptr;
 	int ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
 
-	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
-
-	if (ptrp != NULL)
-		*ptrp = ptr;
+	ret = nilfs_btree_do_lookup(btree, path, key, ptrp, level, 0);
 
 	nilfs_btree_free_path(path);
 
 	return ret;
 }
 
-static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
+static int nilfs_btree_lookup_contig(const struct nilfs_bmap *btree,
 				     __u64 key, __u64 *ptrp, unsigned maxblocks)
 {
-	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
 	struct nilfs_btree_path *path;
 	struct nilfs_btree_node *node;
 	struct inode *dat = NULL;
 	__u64 ptr, ptr2;
 	sector_t blocknr;
 	int level = NILFS_BTREE_LEVEL_NODE_MIN;
-	int ret, cnt, index, maxlevel;
+	int ret, cnt, index, maxlevel, ncmax;
+	struct nilfs_btree_readahead_info p;
 
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
 
-	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level);
+	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level, 1);
 	if (ret < 0)
 		goto out;
 
-	if (NILFS_BMAP_USE_VBN(bmap)) {
-		dat = nilfs_bmap_get_dat(bmap);
+	if (NILFS_BMAP_USE_VBN(btree)) {
+		dat = nilfs_bmap_get_dat(btree);
 		ret = nilfs_dat_translate(dat, ptr, &blocknr);
 		if (ret < 0)
 			goto out;
@@ -566,14 +652,14 @@ static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
 		goto end;
 
 	maxlevel = nilfs_btree_height(btree) - 1;
-	node = nilfs_btree_get_node(btree, path, level);
+	node = nilfs_btree_get_node(btree, path, level, &ncmax);
 	index = path[level].bp_index + 1;
 	for (;;) {
 		while (index < nilfs_btree_node_get_nchildren(node)) {
 			if (nilfs_btree_node_get_key(node, index) !=
 			    key + cnt)
 				goto end;
-			ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
+			ptr2 = nilfs_btree_node_get_ptr(node, index, ncmax);
 			if (dat) {
 				ret = nilfs_dat_translate(dat, ptr2, &blocknr);
 				if (ret < 0)
@@ -589,20 +675,24 @@ static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
 			break;
 
 		/* look-up right sibling node */
-		node = nilfs_btree_get_node(btree, path, level + 1);
-		index = path[level + 1].bp_index + 1;
-		if (index >= nilfs_btree_node_get_nchildren(node) ||
-		    nilfs_btree_node_get_key(node, index) != key + cnt)
+		p.node = nilfs_btree_get_node(btree, path, level + 1, &p.ncmax);
+		p.index = path[level + 1].bp_index + 1;
+		p.max_ra_blocks = 7;
+		if (p.index >= nilfs_btree_node_get_nchildren(p.node) ||
+		    nilfs_btree_node_get_key(p.node, p.index) != key + cnt)
 			break;
-		ptr2 = nilfs_btree_node_get_ptr(btree, node, index);
-		path[level + 1].bp_index = index;
+		ptr2 = nilfs_btree_node_get_ptr(p.node, p.index, p.ncmax);
+		path[level + 1].bp_index = p.index;
 
 		brelse(path[level].bp_bh);
 		path[level].bp_bh = NULL;
-		ret = nilfs_btree_get_block(btree, ptr2, &path[level].bp_bh);
+
+		ret = __nilfs_btree_get_block(btree, ptr2, &path[level].bp_bh,
+					      &p);
 		if (ret < 0)
 			goto out;
 		node = nilfs_btree_get_nonroot_node(path, level);
+		ncmax = nilfs_btree_nchildren_per_block(btree);
 		index = 0;
 		path[level].bp_index = index;
 	}
@@ -614,7 +704,7 @@ static int nilfs_btree_lookup_contig(const struct nilfs_bmap *bmap,
 	return ret;
 }
 
-static void nilfs_btree_promote_key(struct nilfs_btree *btree,
+static void nilfs_btree_promote_key(struct nilfs_bmap *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 key)
 {
@@ -636,16 +726,18 @@ static void nilfs_btree_promote_key(struct nilfs_btree *btree,
 	}
 }
 
-static void nilfs_btree_do_insert(struct nilfs_btree *btree,
+static void nilfs_btree_do_insert(struct nilfs_bmap *btree,
 				  struct nilfs_btree_path *path,
 				  int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node;
+	int ncblk;
 
 	if (level < nilfs_btree_height(btree) - 1) {
 		node = nilfs_btree_get_nonroot_node(path, level);
-		nilfs_btree_node_insert(btree, node, *keyp, *ptrp,
-					path[level].bp_index);
+		ncblk = nilfs_btree_nchildren_per_block(btree);
+		nilfs_btree_node_insert(node, path[level].bp_index,
+					*keyp, *ptrp, ncblk);
 		if (!buffer_dirty(path[level].bp_bh))
 			nilfs_btnode_mark_dirty(path[level].bp_bh);
 
@@ -655,22 +747,24 @@ static void nilfs_btree_do_insert(struct nilfs_btree *btree,
 									 0));
 	} else {
 		node = nilfs_btree_get_root(btree);
-		nilfs_btree_node_insert(btree, node, *keyp, *ptrp,
-					path[level].bp_index);
+		nilfs_btree_node_insert(node, path[level].bp_index,
+					*keyp, *ptrp,
+					NILFS_BTREE_ROOT_NCHILDREN_MAX);
 	}
 }
 
-static void nilfs_btree_carry_left(struct nilfs_btree *btree,
+static void nilfs_btree_carry_left(struct nilfs_bmap *btree,
 				   struct nilfs_btree_path *path,
 				   int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *left;
-	int nchildren, lnchildren, n, move;
+	int nchildren, lnchildren, n, move, ncblk;
 
 	node = nilfs_btree_get_nonroot_node(path, level);
 	left = nilfs_btree_get_sib_node(path, level);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	lnchildren = nilfs_btree_node_get_nchildren(left);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 	move = 0;
 
 	n = (nchildren + lnchildren + 1) / 2 - lnchildren;
@@ -680,7 +774,7 @@ static void nilfs_btree_carry_left(struct nilfs_btree *btree,
 		move = 1;
 	}
 
-	nilfs_btree_node_move_left(btree, left, node, n);
+	nilfs_btree_node_move_left(left, node, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -705,17 +799,18 @@ static void nilfs_btree_carry_left(struct nilfs_btree *btree,
 	nilfs_btree_do_insert(btree, path, level, keyp, ptrp);
 }
 
-static void nilfs_btree_carry_right(struct nilfs_btree *btree,
+static void nilfs_btree_carry_right(struct nilfs_bmap *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *right;
-	int nchildren, rnchildren, n, move;
+	int nchildren, rnchildren, n, move, ncblk;
 
 	node = nilfs_btree_get_nonroot_node(path, level);
 	right = nilfs_btree_get_sib_node(path, level);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	rnchildren = nilfs_btree_node_get_nchildren(right);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 	move = 0;
 
 	n = (nchildren + rnchildren + 1) / 2 - rnchildren;
@@ -725,7 +820,7 @@ static void nilfs_btree_carry_right(struct nilfs_btree *btree,
 		move = 1;
 	}
 
-	nilfs_btree_node_move_right(btree, node, right, n);
+	nilfs_btree_node_move_right(node, right, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -751,18 +846,19 @@ static void nilfs_btree_carry_right(struct nilfs_btree *btree,
 	nilfs_btree_do_insert(btree, path, level, keyp, ptrp);
 }
 
-static void nilfs_btree_split(struct nilfs_btree *btree,
+static void nilfs_btree_split(struct nilfs_bmap *btree,
 			      struct nilfs_btree_path *path,
 			      int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *right;
 	__u64 newkey;
 	__u64 newptr;
-	int nchildren, n, move;
+	int nchildren, n, move, ncblk;
 
 	node = nilfs_btree_get_nonroot_node(path, level);
 	right = nilfs_btree_get_sib_node(path, level);
 	nchildren = nilfs_btree_node_get_nchildren(node);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 	move = 0;
 
 	n = (nchildren + 1) / 2;
@@ -771,7 +867,7 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 		move = 1;
 	}
 
-	nilfs_btree_node_move_right(btree, node, right, n);
+	nilfs_btree_node_move_right(node, right, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -783,8 +879,8 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 
 	if (move) {
 		path[level].bp_index -= nilfs_btree_node_get_nchildren(node);
-		nilfs_btree_node_insert(btree, right, *keyp, *ptrp,
-					path[level].bp_index);
+		nilfs_btree_node_insert(right, path[level].bp_index,
+					*keyp, *ptrp, ncblk);
 
 		*keyp = nilfs_btree_node_get_key(right, 0);
 		*ptrp = path[level].bp_newreq.bpr_ptr;
@@ -805,19 +901,21 @@ static void nilfs_btree_split(struct nilfs_btree *btree,
 	path[level + 1].bp_index++;
 }
 
-static void nilfs_btree_grow(struct nilfs_btree *btree,
+static void nilfs_btree_grow(struct nilfs_bmap *btree,
 			     struct nilfs_btree_path *path,
 			     int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *root, *child;
-	int n;
+	int n, ncblk;
 
 	root = nilfs_btree_get_root(btree);
 	child = nilfs_btree_get_sib_node(path, level);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
 	n = nilfs_btree_node_get_nchildren(root);
 
-	nilfs_btree_node_move_right(btree, root, child, n);
+	nilfs_btree_node_move_right(root, child, n,
+				    NILFS_BTREE_ROOT_NCHILDREN_MAX, ncblk);
 	nilfs_btree_node_set_level(root, level + 1);
 
 	if (!buffer_dirty(path[level].bp_sib_bh))
@@ -832,11 +930,11 @@ static void nilfs_btree_grow(struct nilfs_btree *btree,
 	*ptrp = path[level].bp_newreq.bpr_ptr;
 }
 
-static __u64 nilfs_btree_find_near(const struct nilfs_btree *btree,
+static __u64 nilfs_btree_find_near(const struct nilfs_bmap *btree,
 				   const struct nilfs_btree_path *path)
 {
 	struct nilfs_btree_node *node;
-	int level;
+	int level, ncmax;
 
 	if (path == NULL)
 		return NILFS_BMAP_INVALID_PTR;
@@ -844,29 +942,30 @@ static __u64 nilfs_btree_find_near(const struct nilfs_btree *btree,
 	/* left sibling */
 	level = NILFS_BTREE_LEVEL_NODE_MIN;
 	if (path[level].bp_index > 0) {
-		node = nilfs_btree_get_node(btree, path, level);
-		return nilfs_btree_node_get_ptr(btree, node,
-						path[level].bp_index - 1);
+		node = nilfs_btree_get_node(btree, path, level, &ncmax);
+		return nilfs_btree_node_get_ptr(node,
+						path[level].bp_index - 1,
+						ncmax);
 	}
 
 	/* parent */
 	level = NILFS_BTREE_LEVEL_NODE_MIN + 1;
 	if (level <= nilfs_btree_height(btree) - 1) {
-		node = nilfs_btree_get_node(btree, path, level);
-		return nilfs_btree_node_get_ptr(btree, node,
-						path[level].bp_index);
+		node = nilfs_btree_get_node(btree, path, level, &ncmax);
+		return nilfs_btree_node_get_ptr(node, path[level].bp_index,
+						ncmax);
 	}
 
 	return NILFS_BMAP_INVALID_PTR;
 }
 
-static __u64 nilfs_btree_find_target_v(const struct nilfs_btree *btree,
+static __u64 nilfs_btree_find_target_v(const struct nilfs_bmap *btree,
 				       const struct nilfs_btree_path *path,
 				       __u64 key)
 {
 	__u64 ptr;
 
-	ptr = nilfs_bmap_find_target_seq(&btree->bt_bmap, key);
+	ptr = nilfs_bmap_find_target_seq(btree, key);
 	if (ptr != NILFS_BMAP_INVALID_PTR)
 		/* sequential access */
 		return ptr;
@@ -877,17 +976,10 @@ static __u64 nilfs_btree_find_target_v(const struct nilfs_btree *btree,
 			return ptr;
 	}
 	/* block group */
-	return nilfs_bmap_find_target_in_group(&btree->bt_bmap);
-}
-
-static void nilfs_btree_set_target_v(struct nilfs_btree *btree, __u64 key,
-				     __u64 ptr)
-{
-	btree->bt_bmap.b_last_allocated_key = key;
-	btree->bt_bmap.b_last_allocated_ptr = ptr;
+	return nilfs_bmap_find_target_in_group(btree);
 }
 
-static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
+static int nilfs_btree_prepare_insert(struct nilfs_bmap *btree,
 				      struct nilfs_btree_path *path,
 				      int *levelp, __u64 key, __u64 ptr,
 				      struct nilfs_bmap_stats *stats)
@@ -895,79 +987,78 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 	struct buffer_head *bh;
 	struct nilfs_btree_node *node, *parent, *sib;
 	__u64 sibptr;
-	int pindex, level, ret;
+	int pindex, level, ncmax, ncblk, ret;
 	struct inode *dat = NULL;
 
 	stats->bs_nblocks = 0;
 	level = NILFS_BTREE_LEVEL_DATA;
 
 	/* allocate a new ptr for data block */
-	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap)) {
+	if (NILFS_BMAP_USE_VBN(btree)) {
 		path[level].bp_newreq.bpr_ptr =
 			nilfs_btree_find_target_v(btree, path, key);
-		dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+		dat = nilfs_bmap_get_dat(btree);
 	}
 
-	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
-					   &path[level].bp_newreq, dat);
+	ret = nilfs_bmap_prepare_alloc_ptr(btree, &path[level].bp_newreq, dat);
 	if (ret < 0)
 		goto err_out_data;
 
+	ncblk = nilfs_btree_nchildren_per_block(btree);
+
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN;
 	     level < nilfs_btree_height(btree) - 1;
 	     level++) {
 		node = nilfs_btree_get_nonroot_node(path, level);
-		if (nilfs_btree_node_get_nchildren(node) <
-		    nilfs_btree_node_nchildren_max(node, btree)) {
+		if (nilfs_btree_node_get_nchildren(node) < ncblk) {
 			path[level].bp_op = nilfs_btree_do_insert;
 			stats->bs_nblocks++;
 			goto out;
 		}
 
-		parent = nilfs_btree_get_node(btree, path, level + 1);
+		parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
 		pindex = path[level + 1].bp_index;
 
 		/* left sibling */
 		if (pindex > 0) {
-			sibptr = nilfs_btree_node_get_ptr(btree, parent,
-							  pindex - 1);
+			sibptr = nilfs_btree_node_get_ptr(parent, pindex - 1,
+							  ncmax);
 			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
-			if (nilfs_btree_node_get_nchildren(sib) <
-			    nilfs_btree_node_nchildren_max(sib, btree)) {
+			if (nilfs_btree_node_get_nchildren(sib) < ncblk) {
 				path[level].bp_sib_bh = bh;
 				path[level].bp_op = nilfs_btree_carry_left;
 				stats->bs_nblocks++;
 				goto out;
-			} else
+			} else {
 				brelse(bh);
+			}
 		}
 
 		/* right sibling */
-		if (pindex <
-		    nilfs_btree_node_get_nchildren(parent) - 1) {
-			sibptr = nilfs_btree_node_get_ptr(btree, parent,
-							  pindex + 1);
+		if (pindex < nilfs_btree_node_get_nchildren(parent) - 1) {
+			sibptr = nilfs_btree_node_get_ptr(parent, pindex + 1,
+							  ncmax);
 			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_child_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
-			if (nilfs_btree_node_get_nchildren(sib) <
-			    nilfs_btree_node_nchildren_max(sib, btree)) {
+			if (nilfs_btree_node_get_nchildren(sib) < ncblk) {
 				path[level].bp_sib_bh = bh;
 				path[level].bp_op = nilfs_btree_carry_right;
 				stats->bs_nblocks++;
 				goto out;
-			} else
+			} else {
 				brelse(bh);
+			}
 		}
 
 		/* split */
 		path[level].bp_newreq.bpr_ptr =
 			path[level - 1].bp_newreq.bpr_ptr + 1;
-		ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
+		ret = nilfs_bmap_prepare_alloc_ptr(btree,
 						   &path[level].bp_newreq, dat);
 		if (ret < 0)
 			goto err_out_child_node;
@@ -979,9 +1070,8 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 		stats->bs_nblocks++;
 
-		nilfs_btree_node_init(btree,
-				      (struct nilfs_btree_node *)bh->b_data,
-				      0, level, 0, NULL, NULL);
+		sib = (struct nilfs_btree_node *)bh->b_data;
+		nilfs_btree_node_init(sib, 0, level, 0, ncblk, NULL, NULL);
 		path[level].bp_sib_bh = bh;
 		path[level].bp_op = nilfs_btree_split;
 	}
@@ -989,7 +1079,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 	/* root */
 	node = nilfs_btree_get_root(btree);
 	if (nilfs_btree_node_get_nchildren(node) <
-	    nilfs_btree_node_nchildren_max(node, btree)) {
+	    NILFS_BTREE_ROOT_NCHILDREN_MAX) {
 		path[level].bp_op = nilfs_btree_do_insert;
 		stats->bs_nblocks++;
 		goto out;
@@ -997,8 +1087,7 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* grow */
 	path[level].bp_newreq.bpr_ptr = path[level - 1].bp_newreq.bpr_ptr + 1;
-	ret = nilfs_bmap_prepare_alloc_ptr(&btree->bt_bmap,
-					   &path[level].bp_newreq, dat);
+	ret = nilfs_bmap_prepare_alloc_ptr(btree, &path[level].bp_newreq, dat);
 	if (ret < 0)
 		goto err_out_child_node;
 	ret = nilfs_btree_get_new_block(btree, path[level].bp_newreq.bpr_ptr,
@@ -1006,8 +1095,8 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 	if (ret < 0)
 		goto err_out_curr_node;
 
-	nilfs_btree_node_init(btree, (struct nilfs_btree_node *)bh->b_data,
-			      0, level, 0, NULL, NULL);
+	nilfs_btree_node_init((struct nilfs_btree_node *)bh->b_data,
+			      0, level, 0, ncblk, NULL, NULL);
 	path[level].bp_sib_bh = bh;
 	path[level].bp_op = nilfs_btree_grow;
 
@@ -1024,25 +1113,22 @@ static int nilfs_btree_prepare_insert(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq,
-				   dat);
+	nilfs_bmap_abort_alloc_ptr(btree, &path[level].bp_newreq, dat);
  err_out_child_node:
 	for (level--; level > NILFS_BTREE_LEVEL_DATA; level--) {
 		nilfs_btnode_delete(path[level].bp_sib_bh);
-		nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap,
-					   &path[level].bp_newreq, dat);
+		nilfs_bmap_abort_alloc_ptr(btree, &path[level].bp_newreq, dat);
 
 	}
 
-	nilfs_bmap_abort_alloc_ptr(&btree->bt_bmap, &path[level].bp_newreq,
-				   dat);
+	nilfs_bmap_abort_alloc_ptr(btree, &path[level].bp_newreq, dat);
  err_out_data:
 	*levelp = level;
 	stats->bs_nblocks = 0;
 	return ret;
 }
 
-static void nilfs_btree_commit_insert(struct nilfs_btree *btree,
+static void nilfs_btree_commit_insert(struct nilfs_bmap *btree,
 				      struct nilfs_btree_path *path,
 				      int maxlevel, __u64 key, __u64 ptr)
 {
@@ -1051,35 +1137,33 @@ static void nilfs_btree_commit_insert(struct nilfs_btree *btree,
 
 	set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
 	ptr = path[NILFS_BTREE_LEVEL_DATA].bp_newreq.bpr_ptr;
-	if (NILFS_BMAP_USE_VBN(&btree->bt_bmap)) {
-		nilfs_btree_set_target_v(btree, key, ptr);
-		dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+	if (NILFS_BMAP_USE_VBN(btree)) {
+		nilfs_bmap_set_target_v(btree, key, ptr);
+		dat = nilfs_bmap_get_dat(btree);
 	}
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		nilfs_bmap_commit_alloc_ptr(&btree->bt_bmap,
+		nilfs_bmap_commit_alloc_ptr(btree,
 					    &path[level - 1].bp_newreq, dat);
 		path[level].bp_op(btree, path, level, &key, &ptr);
 	}
 
-	if (!nilfs_bmap_dirty(&btree->bt_bmap))
-		nilfs_bmap_set_dirty(&btree->bt_bmap);
+	if (!nilfs_bmap_dirty(btree))
+		nilfs_bmap_set_dirty(btree);
 }
 
-static int nilfs_btree_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
+static int nilfs_btree_insert(struct nilfs_bmap *btree, __u64 key, __u64 ptr)
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	struct nilfs_bmap_stats stats;
 	int level, ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
 
 	ret = nilfs_btree_do_lookup(btree, path, key, NULL,
-				    NILFS_BTREE_LEVEL_NODE_MIN);
+				    NILFS_BTREE_LEVEL_NODE_MIN, 0);
 	if (ret != -ENOENT) {
 		if (ret == 0)
 			ret = -EEXIST;
@@ -1090,23 +1174,25 @@ static int nilfs_btree_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 	if (ret < 0)
 		goto out;
 	nilfs_btree_commit_insert(btree, path, level, key, ptr);
-	nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
+	nilfs_bmap_add_blocks(btree, stats.bs_nblocks);
 
  out:
 	nilfs_btree_free_path(path);
 	return ret;
 }
 
-static void nilfs_btree_do_delete(struct nilfs_btree *btree,
+static void nilfs_btree_do_delete(struct nilfs_bmap *btree,
 				  struct nilfs_btree_path *path,
 				  int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node;
+	int ncblk;
 
 	if (level < nilfs_btree_height(btree) - 1) {
 		node = nilfs_btree_get_nonroot_node(path, level);
-		nilfs_btree_node_delete(btree, node, keyp, ptrp,
-					path[level].bp_index);
+		ncblk = nilfs_btree_nchildren_per_block(btree);
+		nilfs_btree_node_delete(node, path[level].bp_index,
+					keyp, ptrp, ncblk);
 		if (!buffer_dirty(path[level].bp_bh))
 			nilfs_btnode_mark_dirty(path[level].bp_bh);
 		if (path[level].bp_index == 0)
@@ -1114,17 +1200,18 @@ static void nilfs_btree_do_delete(struct nilfs_btree *btree,
 				nilfs_btree_node_get_key(node, 0));
 	} else {
 		node = nilfs_btree_get_root(btree);
-		nilfs_btree_node_delete(btree, node, keyp, ptrp,
-					path[level].bp_index);
+		nilfs_btree_node_delete(node, path[level].bp_index,
+					keyp, ptrp,
+					NILFS_BTREE_ROOT_NCHILDREN_MAX);
 	}
 }
 
-static void nilfs_btree_borrow_left(struct nilfs_btree *btree,
+static void nilfs_btree_borrow_left(struct nilfs_bmap *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *left;
-	int nchildren, lnchildren, n;
+	int nchildren, lnchildren, n, ncblk;
 
 	nilfs_btree_do_delete(btree, path, level, keyp, ptrp);
 
@@ -1132,10 +1219,11 @@ static void nilfs_btree_borrow_left(struct nilfs_btree *btree,
 	left = nilfs_btree_get_sib_node(path, level);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	lnchildren = nilfs_btree_node_get_nchildren(left);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
 	n = (nchildren + lnchildren) / 2 - nchildren;
 
-	nilfs_btree_node_move_right(btree, left, node, n);
+	nilfs_btree_node_move_right(left, node, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -1150,12 +1238,12 @@ static void nilfs_btree_borrow_left(struct nilfs_btree *btree,
 	path[level].bp_index += n;
 }
 
-static void nilfs_btree_borrow_right(struct nilfs_btree *btree,
+static void nilfs_btree_borrow_right(struct nilfs_bmap *btree,
 				     struct nilfs_btree_path *path,
 				     int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *right;
-	int nchildren, rnchildren, n;
+	int nchildren, rnchildren, n, ncblk;
 
 	nilfs_btree_do_delete(btree, path, level, keyp, ptrp);
 
@@ -1163,10 +1251,11 @@ static void nilfs_btree_borrow_right(struct nilfs_btree *btree,
 	right = nilfs_btree_get_sib_node(path, level);
 	nchildren = nilfs_btree_node_get_nchildren(node);
 	rnchildren = nilfs_btree_node_get_nchildren(right);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
 	n = (nchildren + rnchildren) / 2 - nchildren;
 
-	nilfs_btree_node_move_left(btree, node, right, n);
+	nilfs_btree_node_move_left(node, right, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -1182,21 +1271,22 @@ static void nilfs_btree_borrow_right(struct nilfs_btree *btree,
 	path[level].bp_sib_bh = NULL;
 }
 
-static void nilfs_btree_concat_left(struct nilfs_btree *btree,
+static void nilfs_btree_concat_left(struct nilfs_bmap *btree,
 				    struct nilfs_btree_path *path,
 				    int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *left;
-	int n;
+	int n, ncblk;
 
 	nilfs_btree_do_delete(btree, path, level, keyp, ptrp);
 
 	node = nilfs_btree_get_nonroot_node(path, level);
 	left = nilfs_btree_get_sib_node(path, level);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
 	n = nilfs_btree_node_get_nchildren(node);
 
-	nilfs_btree_node_move_left(btree, left, node, n);
+	nilfs_btree_node_move_left(left, node, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_sib_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_sib_bh);
@@ -1207,21 +1297,22 @@ static void nilfs_btree_concat_left(struct nilfs_btree *btree,
 	path[level].bp_index += nilfs_btree_node_get_nchildren(left);
 }
 
-static void nilfs_btree_concat_right(struct nilfs_btree *btree,
+static void nilfs_btree_concat_right(struct nilfs_bmap *btree,
 				     struct nilfs_btree_path *path,
 				     int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *node, *right;
-	int n;
+	int n, ncblk;
 
 	nilfs_btree_do_delete(btree, path, level, keyp, ptrp);
 
 	node = nilfs_btree_get_nonroot_node(path, level);
 	right = nilfs_btree_get_sib_node(path, level);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
 	n = nilfs_btree_node_get_nchildren(right);
 
-	nilfs_btree_node_move_left(btree, node, right, n);
+	nilfs_btree_node_move_left(node, right, n, ncblk, ncblk);
 
 	if (!buffer_dirty(path[level].bp_bh))
 		nilfs_btnode_mark_dirty(path[level].bp_bh);
@@ -1231,29 +1322,32 @@ static void nilfs_btree_concat_right(struct nilfs_btree *btree,
 	path[level + 1].bp_index++;
 }
 
-static void nilfs_btree_shrink(struct nilfs_btree *btree,
+static void nilfs_btree_shrink(struct nilfs_bmap *btree,
 			       struct nilfs_btree_path *path,
 			       int level, __u64 *keyp, __u64 *ptrp)
 {
 	struct nilfs_btree_node *root, *child;
-	int n;
+	int n, ncblk;
 
 	nilfs_btree_do_delete(btree, path, level, keyp, ptrp);
 
 	root = nilfs_btree_get_root(btree);
 	child = nilfs_btree_get_nonroot_node(path, level);
+	ncblk = nilfs_btree_nchildren_per_block(btree);
 
-	nilfs_btree_node_delete(btree, root, NULL, NULL, 0);
+	nilfs_btree_node_delete(root, 0, NULL, NULL,
+				NILFS_BTREE_ROOT_NCHILDREN_MAX);
 	nilfs_btree_node_set_level(root, level);
 	n = nilfs_btree_node_get_nchildren(child);
-	nilfs_btree_node_move_left(btree, root, child, n);
+	nilfs_btree_node_move_left(root, child, n,
+				   NILFS_BTREE_ROOT_NCHILDREN_MAX, ncblk);
 
 	nilfs_btnode_delete(path[level].bp_bh);
 	path[level].bp_bh = NULL;
 }
 
 
-static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
+static int nilfs_btree_prepare_delete(struct nilfs_bmap *btree,
 				      struct nilfs_btree_path *path,
 				      int *levelp,
 				      struct nilfs_bmap_stats *stats,
@@ -1262,42 +1356,43 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 	struct buffer_head *bh;
 	struct nilfs_btree_node *node, *parent, *sib;
 	__u64 sibptr;
-	int pindex, level, ret;
+	int pindex, level, ncmin, ncmax, ncblk, ret;
 
 	ret = 0;
 	stats->bs_nblocks = 0;
+	ncmin = NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
+	ncblk = nilfs_btree_nchildren_per_block(btree);
+
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN;
 	     level < nilfs_btree_height(btree) - 1;
 	     level++) {
 		node = nilfs_btree_get_nonroot_node(path, level);
 		path[level].bp_oldreq.bpr_ptr =
-			nilfs_btree_node_get_ptr(btree, node,
-						 path[level].bp_index);
-		ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
+			nilfs_btree_node_get_ptr(node, path[level].bp_index,
+						 ncblk);
+		ret = nilfs_bmap_prepare_end_ptr(btree,
 						 &path[level].bp_oldreq, dat);
 		if (ret < 0)
 			goto err_out_child_node;
 
-		if (nilfs_btree_node_get_nchildren(node) >
-		    nilfs_btree_node_nchildren_min(node, btree)) {
+		if (nilfs_btree_node_get_nchildren(node) > ncmin) {
 			path[level].bp_op = nilfs_btree_do_delete;
 			stats->bs_nblocks++;
 			goto out;
 		}
 
-		parent = nilfs_btree_get_node(btree, path, level + 1);
+		parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
 		pindex = path[level + 1].bp_index;
 
 		if (pindex > 0) {
 			/* left sibling */
-			sibptr = nilfs_btree_node_get_ptr(btree, parent,
-							  pindex - 1);
+			sibptr = nilfs_btree_node_get_ptr(parent, pindex - 1,
+							  ncmax);
 			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
-			if (nilfs_btree_node_get_nchildren(sib) >
-			    nilfs_btree_node_nchildren_min(sib, btree)) {
+			if (nilfs_btree_node_get_nchildren(sib) > ncmin) {
 				path[level].bp_sib_bh = bh;
 				path[level].bp_op = nilfs_btree_borrow_left;
 				stats->bs_nblocks++;
@@ -1311,14 +1406,13 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 		} else if (pindex <
 			   nilfs_btree_node_get_nchildren(parent) - 1) {
 			/* right sibling */
-			sibptr = nilfs_btree_node_get_ptr(btree, parent,
-							  pindex + 1);
+			sibptr = nilfs_btree_node_get_ptr(parent, pindex + 1,
+							  ncmax);
 			ret = nilfs_btree_get_block(btree, sibptr, &bh);
 			if (ret < 0)
 				goto err_out_curr_node;
 			sib = (struct nilfs_btree_node *)bh->b_data;
-			if (nilfs_btree_node_get_nchildren(sib) >
-			    nilfs_btree_node_nchildren_min(sib, btree)) {
+			if (nilfs_btree_node_get_nchildren(sib) > ncmin) {
 				path[level].bp_sib_bh = bh;
 				path[level].bp_op = nilfs_btree_borrow_right;
 				stats->bs_nblocks++;
@@ -1349,10 +1443,10 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 
 	node = nilfs_btree_get_root(btree);
 	path[level].bp_oldreq.bpr_ptr =
-		nilfs_btree_node_get_ptr(btree, node, path[level].bp_index);
+		nilfs_btree_node_get_ptr(node, path[level].bp_index,
+					 NILFS_BTREE_ROOT_NCHILDREN_MAX);
 
-	ret = nilfs_bmap_prepare_end_ptr(&btree->bt_bmap,
-					 &path[level].bp_oldreq, dat);
+	ret = nilfs_bmap_prepare_end_ptr(btree, &path[level].bp_oldreq, dat);
 	if (ret < 0)
 		goto err_out_child_node;
 
@@ -1367,75 +1461,68 @@ static int nilfs_btree_prepare_delete(struct nilfs_btree *btree,
 
 	/* error */
  err_out_curr_node:
-	nilfs_bmap_abort_end_ptr(&btree->bt_bmap, &path[level].bp_oldreq, dat);
+	nilfs_bmap_abort_end_ptr(btree, &path[level].bp_oldreq, dat);
  err_out_child_node:
 	for (level--; level >= NILFS_BTREE_LEVEL_NODE_MIN; level--) {
 		brelse(path[level].bp_sib_bh);
-		nilfs_bmap_abort_end_ptr(&btree->bt_bmap,
-					 &path[level].bp_oldreq, dat);
+		nilfs_bmap_abort_end_ptr(btree, &path[level].bp_oldreq, dat);
 	}
 	*levelp = level;
 	stats->bs_nblocks = 0;
 	return ret;
 }
 
-static void nilfs_btree_commit_delete(struct nilfs_btree *btree,
+static void nilfs_btree_commit_delete(struct nilfs_bmap *btree,
 				      struct nilfs_btree_path *path,
 				      int maxlevel, struct inode *dat)
 {
 	int level;
 
 	for (level = NILFS_BTREE_LEVEL_NODE_MIN; level <= maxlevel; level++) {
-		nilfs_bmap_commit_end_ptr(&btree->bt_bmap,
-					  &path[level].bp_oldreq, dat);
+		nilfs_bmap_commit_end_ptr(btree, &path[level].bp_oldreq, dat);
 		path[level].bp_op(btree, path, level, NULL, NULL);
 	}
 
-	if (!nilfs_bmap_dirty(&btree->bt_bmap))
-		nilfs_bmap_set_dirty(&btree->bt_bmap);
+	if (!nilfs_bmap_dirty(btree))
+		nilfs_bmap_set_dirty(btree);
 }
 
-static int nilfs_btree_delete(struct nilfs_bmap *bmap, __u64 key)
+static int nilfs_btree_delete(struct nilfs_bmap *btree, __u64 key)
 
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	struct nilfs_bmap_stats stats;
 	struct inode *dat;
 	int level, ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
 
 	ret = nilfs_btree_do_lookup(btree, path, key, NULL,
-				    NILFS_BTREE_LEVEL_NODE_MIN);
+				    NILFS_BTREE_LEVEL_NODE_MIN, 0);
 	if (ret < 0)
 		goto out;
 
 
-	dat = NILFS_BMAP_USE_VBN(&btree->bt_bmap) ?
-		nilfs_bmap_get_dat(&btree->bt_bmap) : NULL;
+	dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
 
 	ret = nilfs_btree_prepare_delete(btree, path, &level, &stats, dat);
 	if (ret < 0)
 		goto out;
 	nilfs_btree_commit_delete(btree, path, level, dat);
-	nilfs_bmap_sub_blocks(bmap, stats.bs_nblocks);
+	nilfs_bmap_sub_blocks(btree, stats.bs_nblocks);
 
 out:
 	nilfs_btree_free_path(path);
 	return ret;
 }
 
-static int nilfs_btree_last_key(const struct nilfs_bmap *bmap, __u64 *keyp)
+static int nilfs_btree_last_key(const struct nilfs_bmap *btree, __u64 *keyp)
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	int ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
@@ -1447,16 +1534,14 @@ static int nilfs_btree_last_key(const struct nilfs_bmap *bmap, __u64 *keyp)
 	return ret;
 }
 
-static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
+static int nilfs_btree_check_delete(struct nilfs_bmap *btree, __u64 key)
 {
 	struct buffer_head *bh;
-	struct nilfs_btree *btree;
 	struct nilfs_btree_node *root, *node;
 	__u64 maxkey, nextmaxkey;
 	__u64 ptr;
 	int nchildren, ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	root = nilfs_btree_get_root(btree);
 	switch (nilfs_btree_height(btree)) {
 	case 2:
@@ -1467,7 +1552,8 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 		nchildren = nilfs_btree_node_get_nchildren(root);
 		if (nchildren > 1)
 			return 0;
-		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
+		ptr = nilfs_btree_node_get_ptr(root, nchildren - 1,
+					       NILFS_BTREE_ROOT_NCHILDREN_MAX);
 		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
@@ -1487,32 +1573,33 @@ static int nilfs_btree_check_delete(struct nilfs_bmap *bmap, __u64 key)
 	return (maxkey == key) && (nextmaxkey < NILFS_BMAP_LARGE_LOW);
 }
 
-static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
+static int nilfs_btree_gather_data(struct nilfs_bmap *btree,
 				   __u64 *keys, __u64 *ptrs, int nitems)
 {
 	struct buffer_head *bh;
-	struct nilfs_btree *btree;
 	struct nilfs_btree_node *node, *root;
 	__le64 *dkeys;
 	__le64 *dptrs;
 	__u64 ptr;
-	int nchildren, i, ret;
+	int nchildren, ncmax, i, ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	root = nilfs_btree_get_root(btree);
 	switch (nilfs_btree_height(btree)) {
 	case 2:
 		bh = NULL;
 		node = root;
+		ncmax = NILFS_BTREE_ROOT_NCHILDREN_MAX;
 		break;
 	case 3:
 		nchildren = nilfs_btree_node_get_nchildren(root);
 		WARN_ON(nchildren > 1);
-		ptr = nilfs_btree_node_get_ptr(btree, root, nchildren - 1);
+		ptr = nilfs_btree_node_get_ptr(root, nchildren - 1,
+					       NILFS_BTREE_ROOT_NCHILDREN_MAX);
 		ret = nilfs_btree_get_block(btree, ptr, &bh);
 		if (ret < 0)
 			return ret;
 		node = (struct nilfs_btree_node *)bh->b_data;
+		ncmax = nilfs_btree_nchildren_per_block(btree);
 		break;
 	default:
 		node = NULL;
@@ -1523,10 +1610,10 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 	if (nchildren < nitems)
 		nitems = nchildren;
 	dkeys = nilfs_btree_node_dkeys(node);
-	dptrs = nilfs_btree_node_dptrs(node, btree);
+	dptrs = nilfs_btree_node_dptrs(node, ncmax);
 	for (i = 0; i < nitems; i++) {
-		keys[i] = nilfs_bmap_dkey_to_key(dkeys[i]);
-		ptrs[i] = nilfs_bmap_dptr_to_ptr(dptrs[i]);
+		keys[i] = le64_to_cpu(dkeys[i]);
+		ptrs[i] = le64_to_cpu(dptrs[i]);
 	}
 
 	if (bh != NULL)
@@ -1536,14 +1623,13 @@ static int nilfs_btree_gather_data(struct nilfs_bmap *bmap,
 }
 
 static int
-nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
+nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *btree, __u64 key,
 				       union nilfs_bmap_ptr_req *dreq,
 				       union nilfs_bmap_ptr_req *nreq,
 				       struct buffer_head **bhp,
 				       struct nilfs_bmap_stats *stats)
 {
 	struct buffer_head *bh;
-	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
 	struct inode *dat = NULL;
 	int ret;
 
@@ -1551,12 +1637,12 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* for data */
 	/* cannot find near ptr */
-	if (NILFS_BMAP_USE_VBN(bmap)) {
+	if (NILFS_BMAP_USE_VBN(btree)) {
 		dreq->bpr_ptr = nilfs_btree_find_target_v(btree, NULL, key);
-		dat = nilfs_bmap_get_dat(bmap);
+		dat = nilfs_bmap_get_dat(btree);
 	}
 
-	ret = nilfs_bmap_prepare_alloc_ptr(bmap, dreq, dat);
+	ret = nilfs_bmap_prepare_alloc_ptr(btree, dreq, dat);
 	if (ret < 0)
 		return ret;
 
@@ -1564,7 +1650,7 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 	stats->bs_nblocks++;
 	if (nreq != NULL) {
 		nreq->bpr_ptr = dreq->bpr_ptr + 1;
-		ret = nilfs_bmap_prepare_alloc_ptr(bmap, nreq, dat);
+		ret = nilfs_bmap_prepare_alloc_ptr(btree, nreq, dat);
 		if (ret < 0)
 			goto err_out_dreq;
 
@@ -1581,16 +1667,16 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *bmap, __u64 key,
 
 	/* error */
  err_out_nreq:
-	nilfs_bmap_abort_alloc_ptr(bmap, nreq, dat);
+	nilfs_bmap_abort_alloc_ptr(btree, nreq, dat);
  err_out_dreq:
-	nilfs_bmap_abort_alloc_ptr(bmap, dreq, dat);
+	nilfs_bmap_abort_alloc_ptr(btree, dreq, dat);
 	stats->bs_nblocks = 0;
 	return ret;
 
 }
 
 static void
-nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
+nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree,
 				      __u64 key, __u64 ptr,
 				      const __u64 *keys, const __u64 *ptrs,
 				      int n,
@@ -1598,57 +1684,59 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
 				      union nilfs_bmap_ptr_req *nreq,
 				      struct buffer_head *bh)
 {
-	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
 	struct nilfs_btree_node *node;
 	struct inode *dat;
 	__u64 tmpptr;
+	int ncblk;
 
 	/* free resources */
-	if (bmap->b_ops->bop_clear != NULL)
-		bmap->b_ops->bop_clear(bmap);
+	if (btree->b_ops->bop_clear != NULL)
+		btree->b_ops->bop_clear(btree);
 
 	/* ptr must be a pointer to a buffer head. */
 	set_buffer_nilfs_volatile((struct buffer_head *)((unsigned long)ptr));
 
 	/* convert and insert */
-	dat = NILFS_BMAP_USE_VBN(bmap) ? nilfs_bmap_get_dat(bmap) : NULL;
-	nilfs_btree_init(bmap);
+	dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL;
+	nilfs_btree_init(btree);
 	if (nreq != NULL) {
-		nilfs_bmap_commit_alloc_ptr(bmap, dreq, dat);
-		nilfs_bmap_commit_alloc_ptr(bmap, nreq, dat);
+		nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
+		nilfs_bmap_commit_alloc_ptr(btree, nreq, dat);
 
 		/* create child node at level 1 */
 		node = (struct nilfs_btree_node *)bh->b_data;
-		nilfs_btree_node_init(btree, node, 0, 1, n, keys, ptrs);
-		nilfs_btree_node_insert(btree, node,
-					key, dreq->bpr_ptr, n);
+		ncblk = nilfs_btree_nchildren_per_block(btree);
+		nilfs_btree_node_init(node, 0, 1, n, ncblk, keys, ptrs);
+		nilfs_btree_node_insert(node, n, key, dreq->bpr_ptr, ncblk);
 		if (!buffer_dirty(bh))
 			nilfs_btnode_mark_dirty(bh);
-		if (!nilfs_bmap_dirty(bmap))
-			nilfs_bmap_set_dirty(bmap);
+		if (!nilfs_bmap_dirty(btree))
+			nilfs_bmap_set_dirty(btree);
 
 		brelse(bh);
 
 		/* create root node at level 2 */
 		node = nilfs_btree_get_root(btree);
 		tmpptr = nreq->bpr_ptr;
-		nilfs_btree_node_init(btree, node, NILFS_BTREE_NODE_ROOT,
-				      2, 1, &keys[0], &tmpptr);
+		nilfs_btree_node_init(node, NILFS_BTREE_NODE_ROOT, 2, 1,
+				      NILFS_BTREE_ROOT_NCHILDREN_MAX,
+				      &keys[0], &tmpptr);
 	} else {
-		nilfs_bmap_commit_alloc_ptr(bmap, dreq, dat);
+		nilfs_bmap_commit_alloc_ptr(btree, dreq, dat);
 
 		/* create root node at level 1 */
 		node = nilfs_btree_get_root(btree);
-		nilfs_btree_node_init(btree, node, NILFS_BTREE_NODE_ROOT,
-				      1, n, keys, ptrs);
-		nilfs_btree_node_insert(btree, node,
-					key, dreq->bpr_ptr, n);
-		if (!nilfs_bmap_dirty(bmap))
-			nilfs_bmap_set_dirty(bmap);
+		nilfs_btree_node_init(node, NILFS_BTREE_NODE_ROOT, 1, n,
+				      NILFS_BTREE_ROOT_NCHILDREN_MAX,
+				      keys, ptrs);
+		nilfs_btree_node_insert(node, n, key, dreq->bpr_ptr,
+					NILFS_BTREE_ROOT_NCHILDREN_MAX);
+		if (!nilfs_bmap_dirty(btree))
+			nilfs_bmap_set_dirty(btree);
 	}
 
-	if (NILFS_BMAP_USE_VBN(bmap))
-		nilfs_btree_set_target_v(btree, key, dreq->bpr_ptr);
+	if (NILFS_BMAP_USE_VBN(btree))
+		nilfs_bmap_set_target_v(btree, key, dreq->bpr_ptr);
 }
 
 /**
@@ -1660,7 +1748,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *bmap,
  * @ptrs:
  * @n:
  */
-int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
+int nilfs_btree_convert_and_insert(struct nilfs_bmap *btree,
 				   __u64 key, __u64 ptr,
 				   const __u64 *keys, const __u64 *ptrs, int n)
 {
@@ -1673,7 +1761,7 @@ int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 		di = &dreq;
 		ni = NULL;
 	} else if ((n + 1) <= NILFS_BTREE_NODE_NCHILDREN_MAX(
-			   1 << bmap->b_inode->i_blkbits)) {
+			   1 << btree->b_inode->i_blkbits)) {
 		di = &dreq;
 		ni = &nreq;
 	} else {
@@ -1682,17 +1770,17 @@ int nilfs_btree_convert_and_insert(struct nilfs_bmap *bmap,
 		BUG();
 	}
 
-	ret = nilfs_btree_prepare_convert_and_insert(bmap, key, di, ni, &bh,
+	ret = nilfs_btree_prepare_convert_and_insert(btree, key, di, ni, &bh,
 						     &stats);
 	if (ret < 0)
 		return ret;
-	nilfs_btree_commit_convert_and_insert(bmap, key, ptr, keys, ptrs, n,
+	nilfs_btree_commit_convert_and_insert(btree, key, ptr, keys, ptrs, n,
 					      di, ni, bh);
-	nilfs_bmap_add_blocks(bmap, stats.bs_nblocks);
+	nilfs_bmap_add_blocks(btree, stats.bs_nblocks);
 	return 0;
 }
 
-static int nilfs_btree_propagate_p(struct nilfs_btree *btree,
+static int nilfs_btree_propagate_p(struct nilfs_bmap *btree,
 				   struct nilfs_btree_path *path,
 				   int level,
 				   struct buffer_head *bh)
@@ -1704,17 +1792,17 @@ static int nilfs_btree_propagate_p(struct nilfs_btree *btree,
 	return 0;
 }
 
-static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
+static int nilfs_btree_prepare_update_v(struct nilfs_bmap *btree,
 					struct nilfs_btree_path *path,
 					int level, struct inode *dat)
 {
 	struct nilfs_btree_node *parent;
-	int ret;
+	int ncmax, ret;
 
-	parent = nilfs_btree_get_node(btree, path, level + 1);
+	parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
 	path[level].bp_oldreq.bpr_ptr =
-		nilfs_btree_node_get_ptr(btree, parent,
-					 path[level + 1].bp_index);
+		nilfs_btree_node_get_ptr(parent, path[level + 1].bp_index,
+					 ncmax);
 	path[level].bp_newreq.bpr_ptr = path[level].bp_oldreq.bpr_ptr + 1;
 	ret = nilfs_dat_prepare_update(dat, &path[level].bp_oldreq.bpr_req,
 				       &path[level].bp_newreq.bpr_req);
@@ -1726,7 +1814,7 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 		path[level].bp_ctxt.newkey = path[level].bp_newreq.bpr_ptr;
 		path[level].bp_ctxt.bh = path[level].bp_bh;
 		ret = nilfs_btnode_prepare_change_key(
-			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
+			&NILFS_BMAP_I(btree)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		if (ret < 0) {
 			nilfs_dat_abort_update(dat,
@@ -1739,30 +1827,31 @@ static int nilfs_btree_prepare_update_v(struct nilfs_btree *btree,
 	return 0;
 }
 
-static void nilfs_btree_commit_update_v(struct nilfs_btree *btree,
+static void nilfs_btree_commit_update_v(struct nilfs_bmap *btree,
 					struct nilfs_btree_path *path,
 					int level, struct inode *dat)
 {
 	struct nilfs_btree_node *parent;
+	int ncmax;
 
 	nilfs_dat_commit_update(dat, &path[level].bp_oldreq.bpr_req,
 				&path[level].bp_newreq.bpr_req,
-				btree->bt_bmap.b_ptr_type == NILFS_BMAP_PTR_VS);
+				btree->b_ptr_type == NILFS_BMAP_PTR_VS);
 
 	if (buffer_nilfs_node(path[level].bp_bh)) {
 		nilfs_btnode_commit_change_key(
-			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
+			&NILFS_BMAP_I(btree)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		path[level].bp_bh = path[level].bp_ctxt.bh;
 	}
 	set_buffer_nilfs_volatile(path[level].bp_bh);
 
-	parent = nilfs_btree_get_node(btree, path, level + 1);
-	nilfs_btree_node_set_ptr(btree, parent, path[level + 1].bp_index,
-				 path[level].bp_newreq.bpr_ptr);
+	parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
+	nilfs_btree_node_set_ptr(parent, path[level + 1].bp_index,
+				 path[level].bp_newreq.bpr_ptr, ncmax);
 }
 
-static void nilfs_btree_abort_update_v(struct nilfs_btree *btree,
+static void nilfs_btree_abort_update_v(struct nilfs_bmap *btree,
 				       struct nilfs_btree_path *path,
 				       int level, struct inode *dat)
 {
@@ -1770,11 +1859,11 @@ static void nilfs_btree_abort_update_v(struct nilfs_btree *btree,
 			       &path[level].bp_newreq.bpr_req);
 	if (buffer_nilfs_node(path[level].bp_bh))
 		nilfs_btnode_abort_change_key(
-			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
+			&NILFS_BMAP_I(btree)->i_btnode_cache,
 			&path[level].bp_ctxt);
 }
 
-static int nilfs_btree_prepare_propagate_v(struct nilfs_btree *btree,
+static int nilfs_btree_prepare_propagate_v(struct nilfs_bmap *btree,
 					   struct nilfs_btree_path *path,
 					   int minlevel, int *maxlevelp,
 					   struct inode *dat)
@@ -1809,7 +1898,7 @@ static int nilfs_btree_prepare_propagate_v(struct nilfs_btree *btree,
 	return ret;
 }
 
-static void nilfs_btree_commit_propagate_v(struct nilfs_btree *btree,
+static void nilfs_btree_commit_propagate_v(struct nilfs_bmap *btree,
 					   struct nilfs_btree_path *path,
 					   int minlevel, int maxlevel,
 					   struct buffer_head *bh,
@@ -1824,14 +1913,15 @@ static void nilfs_btree_commit_propagate_v(struct nilfs_btree *btree,
 		nilfs_btree_commit_update_v(btree, path, level, dat);
 }
 
-static int nilfs_btree_propagate_v(struct nilfs_btree *btree,
+static int nilfs_btree_propagate_v(struct nilfs_bmap *btree,
 				   struct nilfs_btree_path *path,
 				   int level, struct buffer_head *bh)
 {
 	int maxlevel = 0, ret;
 	struct nilfs_btree_node *parent;
-	struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+	struct inode *dat = nilfs_bmap_get_dat(btree);
 	__u64 ptr;
+	int ncmax;
 
 	get_bh(bh);
 	path[level].bp_bh = bh;
@@ -1841,9 +1931,10 @@ static int nilfs_btree_propagate_v(struct nilfs_btree *btree,
 		goto out;
 
 	if (buffer_nilfs_volatile(path[level].bp_bh)) {
-		parent = nilfs_btree_get_node(btree, path, level + 1);
-		ptr = nilfs_btree_node_get_ptr(btree, parent,
-					       path[level + 1].bp_index);
+		parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
+		ptr = nilfs_btree_node_get_ptr(parent,
+					       path[level + 1].bp_index,
+					       ncmax);
 		ret = nilfs_dat_mark_dirty(dat, ptr);
 		if (ret < 0)
 			goto out;
@@ -1857,10 +1948,9 @@ static int nilfs_btree_propagate_v(struct nilfs_btree *btree,
 	return ret;
 }
 
-static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
+static int nilfs_btree_propagate(struct nilfs_bmap *btree,
 				 struct buffer_head *bh)
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	struct nilfs_btree_node *node;
 	__u64 key;
@@ -1868,7 +1958,6 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 
 	WARN_ON(!buffer_dirty(bh));
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
@@ -1878,11 +1967,11 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 		key = nilfs_btree_node_get_key(node, 0);
 		level = nilfs_btree_node_get_level(node);
 	} else {
-		key = nilfs_bmap_data_get_key(bmap, bh);
+		key = nilfs_bmap_data_get_key(btree, bh);
 		level = NILFS_BTREE_LEVEL_DATA;
 	}
 
-	ret = nilfs_btree_do_lookup(btree, path, key, NULL, level + 1);
+	ret = nilfs_btree_do_lookup(btree, path, key, NULL, level + 1, 0);
 	if (ret < 0) {
 		if (unlikely(ret == -ENOENT))
 			printk(KERN_CRIT "%s: key = %llu, level == %d\n",
@@ -1890,7 +1979,7 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 		goto out;
 	}
 
-	ret = NILFS_BMAP_USE_VBN(bmap) ?
+	ret = NILFS_BMAP_USE_VBN(btree) ?
 		nilfs_btree_propagate_v(btree, path, level, bh) :
 		nilfs_btree_propagate_p(btree, path, level, bh);
 
@@ -1900,13 +1989,13 @@ static int nilfs_btree_propagate(const struct nilfs_bmap *bmap,
 	return ret;
 }
 
-static int nilfs_btree_propagate_gc(const struct nilfs_bmap *bmap,
+static int nilfs_btree_propagate_gc(struct nilfs_bmap *btree,
 				    struct buffer_head *bh)
 {
-	return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(bmap), bh->b_blocknr);
+	return nilfs_dat_mark_dirty(nilfs_bmap_get_dat(btree), bh->b_blocknr);
 }
 
-static void nilfs_btree_add_dirty_buffer(struct nilfs_btree *btree,
+static void nilfs_btree_add_dirty_buffer(struct nilfs_bmap *btree,
 					 struct list_head *lists,
 					 struct buffer_head *bh)
 {
@@ -1920,6 +2009,18 @@ static void nilfs_btree_add_dirty_buffer(struct nilfs_btree *btree,
 	node = (struct nilfs_btree_node *)bh->b_data;
 	key = nilfs_btree_node_get_key(node, 0);
 	level = nilfs_btree_node_get_level(node);
+	if (level < NILFS_BTREE_LEVEL_NODE_MIN ||
+	    level >= NILFS_BTREE_LEVEL_MAX) {
+		dump_stack();
+		printk(KERN_WARNING
+		       "%s: invalid btree level: %d (key=%llu, ino=%lu, "
+		       "blocknr=%llu)\n",
+		       __func__, level, (unsigned long long)key,
+		       NILFS_BMAP_I(btree)->vfs_inode.i_ino,
+		       (unsigned long long)bh->b_blocknr);
+		return;
+	}
+
 	list_for_each(head, &lists[level]) {
 		cbh = list_entry(head, struct buffer_head, b_assoc_buffers);
 		cnode = (struct nilfs_btree_node *)cbh->b_data;
@@ -1930,11 +2031,10 @@ static void nilfs_btree_add_dirty_buffer(struct nilfs_btree *btree,
 	list_add_tail(&bh->b_assoc_buffers, head);
 }
 
-static void nilfs_btree_lookup_dirty_buffers(struct nilfs_bmap *bmap,
+static void nilfs_btree_lookup_dirty_buffers(struct nilfs_bmap *btree,
 					     struct list_head *listp)
 {
-	struct nilfs_btree *btree = (struct nilfs_btree *)bmap;
-	struct address_space *btcache = &NILFS_BMAP_I(bmap)->i_btnode_cache;
+	struct address_space *btcache = &NILFS_BMAP_I(btree)->i_btnode_cache;
 	struct list_head lists[NILFS_BTREE_LEVEL_MAX];
 	struct pagevec pvec;
 	struct buffer_head *bh, *head;
@@ -1968,7 +2068,7 @@ static void nilfs_btree_lookup_dirty_buffers(struct nilfs_bmap *bmap,
 		list_splice_tail(&lists[level], listp);
 }
 
-static int nilfs_btree_assign_p(struct nilfs_btree *btree,
+static int nilfs_btree_assign_p(struct nilfs_bmap *btree,
 				struct nilfs_btree_path *path,
 				int level,
 				struct buffer_head **bh,
@@ -1978,38 +2078,38 @@ static int nilfs_btree_assign_p(struct nilfs_btree *btree,
 	struct nilfs_btree_node *parent;
 	__u64 key;
 	__u64 ptr;
-	int ret;
+	int ncmax, ret;
 
-	parent = nilfs_btree_get_node(btree, path, level + 1);
-	ptr = nilfs_btree_node_get_ptr(btree, parent,
-				       path[level + 1].bp_index);
+	parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
+	ptr = nilfs_btree_node_get_ptr(parent, path[level + 1].bp_index,
+				       ncmax);
 	if (buffer_nilfs_node(*bh)) {
 		path[level].bp_ctxt.oldkey = ptr;
 		path[level].bp_ctxt.newkey = blocknr;
 		path[level].bp_ctxt.bh = *bh;
 		ret = nilfs_btnode_prepare_change_key(
-			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
+			&NILFS_BMAP_I(btree)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		if (ret < 0)
 			return ret;
 		nilfs_btnode_commit_change_key(
-			&NILFS_BMAP_I(&btree->bt_bmap)->i_btnode_cache,
+			&NILFS_BMAP_I(btree)->i_btnode_cache,
 			&path[level].bp_ctxt);
 		*bh = path[level].bp_ctxt.bh;
 	}
 
-	nilfs_btree_node_set_ptr(btree, parent,
-				 path[level + 1].bp_index, blocknr);
+	nilfs_btree_node_set_ptr(parent, path[level + 1].bp_index, blocknr,
+				 ncmax);
 
 	key = nilfs_btree_node_get_key(parent, path[level + 1].bp_index);
 	/* on-disk format */
-	binfo->bi_dat.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+	binfo->bi_dat.bi_blkoff = cpu_to_le64(key);
 	binfo->bi_dat.bi_level = level;
 
 	return 0;
 }
 
-static int nilfs_btree_assign_v(struct nilfs_btree *btree,
+static int nilfs_btree_assign_v(struct nilfs_bmap *btree,
 				struct nilfs_btree_path *path,
 				int level,
 				struct buffer_head **bh,
@@ -2017,15 +2117,15 @@ static int nilfs_btree_assign_v(struct nilfs_btree *btree,
 				union nilfs_binfo *binfo)
 {
 	struct nilfs_btree_node *parent;
-	struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
+	struct inode *dat = nilfs_bmap_get_dat(btree);
 	__u64 key;
 	__u64 ptr;
 	union nilfs_bmap_ptr_req req;
-	int ret;
+	int ncmax, ret;
 
-	parent = nilfs_btree_get_node(btree, path, level + 1);
-	ptr = nilfs_btree_node_get_ptr(btree, parent,
-				       path[level + 1].bp_index);
+	parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
+	ptr = nilfs_btree_node_get_ptr(parent, path[level + 1].bp_index,
+				       ncmax);
 	req.bpr_ptr = ptr;
 	ret = nilfs_dat_prepare_start(dat, &req.bpr_req);
 	if (ret < 0)
@@ -2034,24 +2134,22 @@ static int nilfs_btree_assign_v(struct nilfs_btree *btree,
 
 	key = nilfs_btree_node_get_key(parent, path[level + 1].bp_index);
 	/* on-disk format */
-	binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
-	binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+	binfo->bi_v.bi_vblocknr = cpu_to_le64(ptr);
+	binfo->bi_v.bi_blkoff = cpu_to_le64(key);
 
 	return 0;
 }
 
-static int nilfs_btree_assign(struct nilfs_bmap *bmap,
+static int nilfs_btree_assign(struct nilfs_bmap *btree,
 			      struct buffer_head **bh,
 			      sector_t blocknr,
 			      union nilfs_binfo *binfo)
 {
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	struct nilfs_btree_node *node;
 	__u64 key;
 	int level, ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
@@ -2061,17 +2159,17 @@ static int nilfs_btree_assign(struct nilfs_bmap *bmap,
 		key = nilfs_btree_node_get_key(node, 0);
 		level = nilfs_btree_node_get_level(node);
 	} else {
-		key = nilfs_bmap_data_get_key(bmap, *bh);
+		key = nilfs_bmap_data_get_key(btree, *bh);
 		level = NILFS_BTREE_LEVEL_DATA;
 	}
 
-	ret = nilfs_btree_do_lookup(btree, path, key, NULL, level + 1);
+	ret = nilfs_btree_do_lookup(btree, path, key, NULL, level + 1, 0);
 	if (ret < 0) {
 		WARN_ON(ret == -ENOENT);
 		goto out;
 	}
 
-	ret = NILFS_BMAP_USE_VBN(bmap) ?
+	ret = NILFS_BMAP_USE_VBN(btree) ?
 		nilfs_btree_assign_v(btree, path, level, bh, blocknr, binfo) :
 		nilfs_btree_assign_p(btree, path, level, bh, blocknr, binfo);
 
@@ -2081,7 +2179,7 @@ static int nilfs_btree_assign(struct nilfs_bmap *bmap,
 	return ret;
 }
 
-static int nilfs_btree_assign_gc(struct nilfs_bmap *bmap,
+static int nilfs_btree_assign_gc(struct nilfs_bmap *btree,
 				 struct buffer_head **bh,
 				 sector_t blocknr,
 				 union nilfs_binfo *binfo)
@@ -2090,7 +2188,7 @@ static int nilfs_btree_assign_gc(struct nilfs_bmap *bmap,
 	__u64 key;
 	int ret;
 
-	ret = nilfs_dat_move(nilfs_bmap_get_dat(bmap), (*bh)->b_blocknr,
+	ret = nilfs_dat_move(nilfs_bmap_get_dat(btree), (*bh)->b_blocknr,
 			     blocknr);
 	if (ret < 0)
 		return ret;
@@ -2099,29 +2197,27 @@ static int nilfs_btree_assign_gc(struct nilfs_bmap *bmap,
 		node = (struct nilfs_btree_node *)(*bh)->b_data;
 		key = nilfs_btree_node_get_key(node, 0);
 	} else
-		key = nilfs_bmap_data_get_key(bmap, *bh);
+		key = nilfs_bmap_data_get_key(btree, *bh);
 
 	/* on-disk format */
 	binfo->bi_v.bi_vblocknr = cpu_to_le64((*bh)->b_blocknr);
-	binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+	binfo->bi_v.bi_blkoff = cpu_to_le64(key);
 
 	return 0;
 }
 
-static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
+static int nilfs_btree_mark(struct nilfs_bmap *btree, __u64 key, int level)
 {
 	struct buffer_head *bh;
-	struct nilfs_btree *btree;
 	struct nilfs_btree_path *path;
 	__u64 ptr;
 	int ret;
 
-	btree = (struct nilfs_btree *)bmap;
 	path = nilfs_btree_alloc_path();
 	if (path == NULL)
 		return -ENOMEM;
 
-	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level + 1);
+	ret = nilfs_btree_do_lookup(btree, path, key, &ptr, level + 1, 0);
 	if (ret < 0) {
 		WARN_ON(ret == -ENOENT);
 		goto out;
@@ -2135,8 +2231,8 @@ static int nilfs_btree_mark(struct nilfs_bmap *bmap, __u64 key, int level)
 	if (!buffer_dirty(bh))
 		nilfs_btnode_mark_dirty(bh);
 	brelse(bh);
-	if (!nilfs_bmap_dirty(&btree->bt_bmap))
-		nilfs_bmap_set_dirty(&btree->bt_bmap);
+	if (!nilfs_bmap_dirty(btree))
+		nilfs_bmap_set_dirty(btree);
 
  out:
 	nilfs_btree_free_path(path);
@@ -2186,10 +2282,14 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = {
 int nilfs_btree_init(struct nilfs_bmap *bmap)
 {
 	bmap->b_ops = &nilfs_btree_ops;
+	bmap->b_nchildren_per_block =
+		NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
 	return 0;
 }
 
 void nilfs_btree_init_gc(struct nilfs_bmap *bmap)
 {
 	bmap->b_ops = &nilfs_btree_ops_gc;
+	bmap->b_nchildren_per_block =
+		NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap));
 }
diff --git a/fs/nilfs2/btree.h b/fs/nilfs2/btree.h
index 43c8c5b541f..22c02e35b6e 100644
--- a/fs/nilfs2/btree.h
+++ b/fs/nilfs2/btree.h
@@ -31,14 +31,6 @@
 #include "bmap.h"
 
 /**
- * struct nilfs_btree - B-tree structure
- * @bt_bmap: bmap base structure
- */
-struct nilfs_btree {
-	struct nilfs_bmap bt_bmap;
-};
-
-/**
  * struct nilfs_btree_path - A path on which B-tree operations are executed
  * @bp_bh: buffer head of node block
  * @bp_sib_bh: buffer head of sibling node block
@@ -54,7 +46,7 @@ struct nilfs_btree_path {
 	union nilfs_bmap_ptr_req bp_oldreq;
 	union nilfs_bmap_ptr_req bp_newreq;
 	struct nilfs_btnode_chkey_ctxt bp_ctxt;
-	void (*bp_op)(struct nilfs_btree *, struct nilfs_btree_path *,
+	void (*bp_op)(struct nilfs_bmap *, struct nilfs_btree_path *,
 		      int, __u64 *, __u64 *);
 };
 
@@ -80,4 +72,6 @@ int nilfs_btree_convert_and_insert(struct nilfs_bmap *, __u64, __u64,
 				   const __u64 *, const __u64 *, int);
 void nilfs_btree_init_gc(struct nilfs_bmap *);
 
+int nilfs_btree_broken_node_block(struct buffer_head *bh);
+
 #endif	/* _NILFS_BTREE_H */
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 85c89dfc71f..b60277b4446 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -141,7 +141,7 @@ static void nilfs_check_page(struct page *page)
 	}
 	for (offs = 0; offs <= limit - NILFS_DIR_REC_LEN(1); offs += rec_len) {
 		p = (struct nilfs_dir_entry *)(kaddr + offs);
-		rec_len = le16_to_cpu(p->rec_len);
+		rec_len = nilfs_rec_len_from_disk(p->rec_len);
 
 		if (rec_len < NILFS_DIR_REC_LEN(1))
 			goto Eshort;
@@ -199,13 +199,10 @@ fail:
 static struct page *nilfs_get_page(struct inode *dir, unsigned long n)
 {
 	struct address_space *mapping = dir->i_mapping;
-	struct page *page = read_cache_page(mapping, n,
-				(filler_t *)mapping->a_ops->readpage, NULL);
+	struct page *page = read_mapping_page(mapping, n, NULL);
+
 	if (!IS_ERR(page)) {
-		wait_on_page_locked(page);
 		kmap(page);
-		if (!PageUptodate(page))
-			goto fail;
 		if (!PageChecked(page))
 			nilfs_check_page(page);
 		if (PageError(page))
@@ -238,7 +235,8 @@ nilfs_match(int len, const unsigned char *name, struct nilfs_dir_entry *de)
  */
 static struct nilfs_dir_entry *nilfs_next_entry(struct nilfs_dir_entry *p)
 {
-	return (struct nilfs_dir_entry *)((char *)p + le16_to_cpu(p->rec_len));
+	return (struct nilfs_dir_entry *)((char *)p +
+					  nilfs_rec_len_from_disk(p->rec_len));
 }
 
 static unsigned char
@@ -329,7 +327,7 @@ static int nilfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 					goto success;
 				}
 			}
-			filp->f_pos += le16_to_cpu(de->rec_len);
+			filp->f_pos += nilfs_rec_len_from_disk(de->rec_len);
 		}
 		nilfs_put_page(page);
 	}
@@ -444,7 +442,7 @@ void nilfs_set_link(struct inode *dir, struct nilfs_dir_entry *de,
 		    struct page *page, struct inode *inode)
 {
 	unsigned from = (char *) de - (char *) page_address(page);
-	unsigned to = from + le16_to_cpu(de->rec_len);
+	unsigned to = from + nilfs_rec_len_from_disk(de->rec_len);
 	struct address_space *mapping = page->mapping;
 	int err;
 
@@ -500,7 +498,7 @@ int nilfs_add_link(struct dentry *dentry, struct inode *inode)
 				/* We hit i_size */
 				name_len = 0;
 				rec_len = chunk_size;
-				de->rec_len = cpu_to_le16(chunk_size);
+				de->rec_len = nilfs_rec_len_to_disk(chunk_size);
 				de->inode = 0;
 				goto got_it;
 			}
@@ -514,7 +512,7 @@ int nilfs_add_link(struct dentry *dentry, struct inode *inode)
 			if (nilfs_match(namelen, name, de))
 				goto out_unlock;
 			name_len = NILFS_DIR_REC_LEN(de->name_len);
-			rec_len = le16_to_cpu(de->rec_len);
+			rec_len = nilfs_rec_len_from_disk(de->rec_len);
 			if (!de->inode && rec_len >= reclen)
 				goto got_it;
 			if (rec_len >= name_len + reclen)
@@ -537,8 +535,8 @@ got_it:
 		struct nilfs_dir_entry *de1;
 
 		de1 = (struct nilfs_dir_entry *)((char *)de + name_len);
-		de1->rec_len = cpu_to_le16(rec_len - name_len);
-		de->rec_len = cpu_to_le16(name_len);
+		de1->rec_len = nilfs_rec_len_to_disk(rec_len - name_len);
+		de->rec_len = nilfs_rec_len_to_disk(name_len);
 		de = de1;
 	}
 	de->name_len = namelen;
@@ -569,7 +567,8 @@ int nilfs_delete_entry(struct nilfs_dir_entry *dir, struct page *page)
 	struct inode *inode = mapping->host;
 	char *kaddr = page_address(page);
 	unsigned from = ((char *)dir - kaddr) & ~(nilfs_chunk_size(inode) - 1);
-	unsigned to = ((char *)dir - kaddr) + le16_to_cpu(dir->rec_len);
+	unsigned to = ((char *)dir - kaddr) +
+		nilfs_rec_len_from_disk(dir->rec_len);
 	struct nilfs_dir_entry *pde = NULL;
 	struct nilfs_dir_entry *de = (struct nilfs_dir_entry *)(kaddr + from);
 	int err;
@@ -590,7 +589,7 @@ int nilfs_delete_entry(struct nilfs_dir_entry *dir, struct page *page)
 	err = nilfs_prepare_chunk(page, mapping, from, to);
 	BUG_ON(err);
 	if (pde)
-		pde->rec_len = cpu_to_le16(to - from);
+		pde->rec_len = nilfs_rec_len_to_disk(to - from);
 	dir->inode = 0;
 	nilfs_commit_chunk(page, mapping, from, to);
 	inode->i_ctime = inode->i_mtime = CURRENT_TIME;
@@ -624,14 +623,14 @@ int nilfs_make_empty(struct inode *inode, struct inode *parent)
 	memset(kaddr, 0, chunk_size);
 	de = (struct nilfs_dir_entry *)kaddr;
 	de->name_len = 1;
-	de->rec_len = cpu_to_le16(NILFS_DIR_REC_LEN(1));
+	de->rec_len = nilfs_rec_len_to_disk(NILFS_DIR_REC_LEN(1));
 	memcpy(de->name, ".\0\0", 4);
 	de->inode = cpu_to_le64(inode->i_ino);
 	nilfs_set_de_type(de, inode);
 
 	de = (struct nilfs_dir_entry *)(kaddr + NILFS_DIR_REC_LEN(1));
 	de->name_len = 2;
-	de->rec_len = cpu_to_le16(chunk_size - NILFS_DIR_REC_LEN(1));
+	de->rec_len = nilfs_rec_len_to_disk(chunk_size - NILFS_DIR_REC_LEN(1));
 	de->inode = cpu_to_le64(parent->i_ino);
 	memcpy(de->name, "..\0", 4);
 	nilfs_set_de_type(de, inode);
diff --git a/fs/nilfs2/direct.c b/fs/nilfs2/direct.c
index 236753df5cd..324d80c5751 100644
--- a/fs/nilfs2/direct.c
+++ b/fs/nilfs2/direct.c
@@ -27,47 +27,43 @@
 #include "alloc.h"
 #include "dat.h"
 
-static inline __le64 *nilfs_direct_dptrs(const struct nilfs_direct *direct)
+static inline __le64 *nilfs_direct_dptrs(const struct nilfs_bmap *direct)
 {
 	return (__le64 *)
-		((struct nilfs_direct_node *)direct->d_bmap.b_u.u_data + 1);
+		((struct nilfs_direct_node *)direct->b_u.u_data + 1);
 }
 
 static inline __u64
-nilfs_direct_get_ptr(const struct nilfs_direct *direct, __u64 key)
+nilfs_direct_get_ptr(const struct nilfs_bmap *direct, __u64 key)
 {
-	return nilfs_bmap_dptr_to_ptr(*(nilfs_direct_dptrs(direct) + key));
+	return le64_to_cpu(*(nilfs_direct_dptrs(direct) + key));
 }
 
-static inline void nilfs_direct_set_ptr(struct nilfs_direct *direct,
+static inline void nilfs_direct_set_ptr(struct nilfs_bmap *direct,
 					__u64 key, __u64 ptr)
 {
-	*(nilfs_direct_dptrs(direct) + key) = nilfs_bmap_ptr_to_dptr(ptr);
+	*(nilfs_direct_dptrs(direct) + key) = cpu_to_le64(ptr);
 }
 
-static int nilfs_direct_lookup(const struct nilfs_bmap *bmap,
+static int nilfs_direct_lookup(const struct nilfs_bmap *direct,
 			       __u64 key, int level, __u64 *ptrp)
 {
-	struct nilfs_direct *direct;
 	__u64 ptr;
 
-	direct = (struct nilfs_direct *)bmap;  /* XXX: use macro for level 1 */
 	if (key > NILFS_DIRECT_KEY_MAX || level != 1)
 		return -ENOENT;
 	ptr = nilfs_direct_get_ptr(direct, key);
 	if (ptr == NILFS_BMAP_INVALID_PTR)
 		return -ENOENT;
 
-	if (ptrp != NULL)
-		*ptrp = ptr;
+	*ptrp = ptr;
 	return 0;
 }
 
-static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap,
+static int nilfs_direct_lookup_contig(const struct nilfs_bmap *direct,
 				      __u64 key, __u64 *ptrp,
 				      unsigned maxblocks)
 {
-	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 	struct inode *dat = NULL;
 	__u64 ptr, ptr2;
 	sector_t blocknr;
@@ -79,8 +75,8 @@ static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap,
 	if (ptr == NILFS_BMAP_INVALID_PTR)
 		return -ENOENT;
 
-	if (NILFS_BMAP_USE_VBN(bmap)) {
-		dat = nilfs_bmap_get_dat(bmap);
+	if (NILFS_BMAP_USE_VBN(direct)) {
+		dat = nilfs_bmap_get_dat(direct);
 		ret = nilfs_dat_translate(dat, ptr, &blocknr);
 		if (ret < 0)
 			return ret;
@@ -106,29 +102,21 @@ static int nilfs_direct_lookup_contig(const struct nilfs_bmap *bmap,
 }
 
 static __u64
-nilfs_direct_find_target_v(const struct nilfs_direct *direct, __u64 key)
+nilfs_direct_find_target_v(const struct nilfs_bmap *direct, __u64 key)
 {
 	__u64 ptr;
 
-	ptr = nilfs_bmap_find_target_seq(&direct->d_bmap, key);
+	ptr = nilfs_bmap_find_target_seq(direct, key);
 	if (ptr != NILFS_BMAP_INVALID_PTR)
 		/* sequential access */
 		return ptr;
 	else
 		/* block group */
-		return nilfs_bmap_find_target_in_group(&direct->d_bmap);
-}
-
-static void nilfs_direct_set_target_v(struct nilfs_direct *direct,
-				      __u64 key, __u64 ptr)
-{
-	direct->d_bmap.b_last_allocated_key = key;
-	direct->d_bmap.b_last_allocated_ptr = ptr;
+		return nilfs_bmap_find_target_in_group(direct);
 }
 
 static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 {
-	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 	union nilfs_bmap_ptr_req req;
 	struct inode *dat = NULL;
 	struct buffer_head *bh;
@@ -136,11 +124,11 @@ static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 
 	if (key > NILFS_DIRECT_KEY_MAX)
 		return -ENOENT;
-	if (nilfs_direct_get_ptr(direct, key) != NILFS_BMAP_INVALID_PTR)
+	if (nilfs_direct_get_ptr(bmap, key) != NILFS_BMAP_INVALID_PTR)
 		return -EEXIST;
 
 	if (NILFS_BMAP_USE_VBN(bmap)) {
-		req.bpr_ptr = nilfs_direct_find_target_v(direct, key);
+		req.bpr_ptr = nilfs_direct_find_target_v(bmap, key);
 		dat = nilfs_bmap_get_dat(bmap);
 	}
 	ret = nilfs_bmap_prepare_alloc_ptr(bmap, &req, dat);
@@ -150,13 +138,13 @@ static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 		set_buffer_nilfs_volatile(bh);
 
 		nilfs_bmap_commit_alloc_ptr(bmap, &req, dat);
-		nilfs_direct_set_ptr(direct, key, req.bpr_ptr);
+		nilfs_direct_set_ptr(bmap, key, req.bpr_ptr);
 
 		if (!nilfs_bmap_dirty(bmap))
 			nilfs_bmap_set_dirty(bmap);
 
 		if (NILFS_BMAP_USE_VBN(bmap))
-			nilfs_direct_set_target_v(direct, key, req.bpr_ptr);
+			nilfs_bmap_set_target_v(bmap, key, req.bpr_ptr);
 
 		nilfs_bmap_add_blocks(bmap, 1);
 	}
@@ -165,33 +153,30 @@ static int nilfs_direct_insert(struct nilfs_bmap *bmap, __u64 key, __u64 ptr)
 
 static int nilfs_direct_delete(struct nilfs_bmap *bmap, __u64 key)
 {
-	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 	union nilfs_bmap_ptr_req req;
 	struct inode *dat;
 	int ret;
 
 	if (key > NILFS_DIRECT_KEY_MAX ||
-	    nilfs_direct_get_ptr(direct, key) == NILFS_BMAP_INVALID_PTR)
+	    nilfs_direct_get_ptr(bmap, key) == NILFS_BMAP_INVALID_PTR)
 		return -ENOENT;
 
 	dat = NILFS_BMAP_USE_VBN(bmap) ? nilfs_bmap_get_dat(bmap) : NULL;
-	req.bpr_ptr = nilfs_direct_get_ptr(direct, key);
+	req.bpr_ptr = nilfs_direct_get_ptr(bmap, key);
 
 	ret = nilfs_bmap_prepare_end_ptr(bmap, &req, dat);
 	if (!ret) {
 		nilfs_bmap_commit_end_ptr(bmap, &req, dat);
-		nilfs_direct_set_ptr(direct, key, NILFS_BMAP_INVALID_PTR);
+		nilfs_direct_set_ptr(bmap, key, NILFS_BMAP_INVALID_PTR);
 		nilfs_bmap_sub_blocks(bmap, 1);
 	}
 	return ret;
 }
 
-static int nilfs_direct_last_key(const struct nilfs_bmap *bmap, __u64 *keyp)
+static int nilfs_direct_last_key(const struct nilfs_bmap *direct, __u64 *keyp)
 {
-	struct nilfs_direct *direct;
 	__u64 key, lastkey;
 
-	direct = (struct nilfs_direct *)bmap;
 	lastkey = NILFS_DIRECT_KEY_MAX + 1;
 	for (key = NILFS_DIRECT_KEY_MIN; key <= NILFS_DIRECT_KEY_MAX; key++)
 		if (nilfs_direct_get_ptr(direct, key) !=
@@ -211,15 +196,13 @@ static int nilfs_direct_check_insert(const struct nilfs_bmap *bmap, __u64 key)
 	return key > NILFS_DIRECT_KEY_MAX;
 }
 
-static int nilfs_direct_gather_data(struct nilfs_bmap *bmap,
+static int nilfs_direct_gather_data(struct nilfs_bmap *direct,
 				    __u64 *keys, __u64 *ptrs, int nitems)
 {
-	struct nilfs_direct *direct;
 	__u64 key;
 	__u64 ptr;
 	int n;
 
-	direct = (struct nilfs_direct *)bmap;
 	if (nitems > NILFS_DIRECT_NBLOCKS)
 		nitems = NILFS_DIRECT_NBLOCKS;
 	n = 0;
@@ -237,7 +220,6 @@ static int nilfs_direct_gather_data(struct nilfs_bmap *bmap,
 int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
 				    __u64 key, __u64 *keys, __u64 *ptrs, int n)
 {
-	struct nilfs_direct *direct;
 	__le64 *dptrs;
 	int ret, i, j;
 
@@ -253,12 +235,11 @@ int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
 		bmap->b_ops->bop_clear(bmap);
 
 	/* convert */
-	direct = (struct nilfs_direct *)bmap;
-	dptrs = nilfs_direct_dptrs(direct);
+	dptrs = nilfs_direct_dptrs(bmap);
 	for (i = 0, j = 0; i < NILFS_DIRECT_NBLOCKS; i++) {
 		if ((j < n) && (i == keys[j])) {
 			dptrs[i] = (i != key) ?
-				nilfs_bmap_ptr_to_dptr(ptrs[j]) :
+				cpu_to_le64(ptrs[j]) :
 				NILFS_BMAP_INVALID_PTR;
 			j++;
 		} else
@@ -269,10 +250,9 @@ int nilfs_direct_delete_and_convert(struct nilfs_bmap *bmap,
 	return 0;
 }
 
-static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
+static int nilfs_direct_propagate(struct nilfs_bmap *bmap,
 				  struct buffer_head *bh)
 {
-	struct nilfs_direct *direct = (struct nilfs_direct *)bmap;
 	struct nilfs_palloc_req oldreq, newreq;
 	struct inode *dat;
 	__u64 key;
@@ -284,7 +264,7 @@ static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
 
 	dat = nilfs_bmap_get_dat(bmap);
 	key = nilfs_bmap_data_get_key(bmap, bh);
-	ptr = nilfs_direct_get_ptr(direct, key);
+	ptr = nilfs_direct_get_ptr(bmap, key);
 	if (!buffer_nilfs_volatile(bh)) {
 		oldreq.pr_entry_nr = ptr;
 		newreq.pr_entry_nr = ptr;
@@ -294,20 +274,20 @@ static int nilfs_direct_propagate(const struct nilfs_bmap *bmap,
 		nilfs_dat_commit_update(dat, &oldreq, &newreq,
 					bmap->b_ptr_type == NILFS_BMAP_PTR_VS);
 		set_buffer_nilfs_volatile(bh);
-		nilfs_direct_set_ptr(direct, key, newreq.pr_entry_nr);
+		nilfs_direct_set_ptr(bmap, key, newreq.pr_entry_nr);
 	} else
 		ret = nilfs_dat_mark_dirty(dat, ptr);
 
 	return ret;
 }
 
-static int nilfs_direct_assign_v(struct nilfs_direct *direct,
+static int nilfs_direct_assign_v(struct nilfs_bmap *direct,
 				 __u64 key, __u64 ptr,
 				 struct buffer_head **bh,
 				 sector_t blocknr,
 				 union nilfs_binfo *binfo)
 {
-	struct inode *dat = nilfs_bmap_get_dat(&direct->d_bmap);
+	struct inode *dat = nilfs_bmap_get_dat(direct);
 	union nilfs_bmap_ptr_req req;
 	int ret;
 
@@ -315,13 +295,13 @@ static int nilfs_direct_assign_v(struct nilfs_direct *direct,
 	ret = nilfs_dat_prepare_start(dat, &req.bpr_req);
 	if (!ret) {
 		nilfs_dat_commit_start(dat, &req.bpr_req, blocknr);
-		binfo->bi_v.bi_vblocknr = nilfs_bmap_ptr_to_dptr(ptr);
-		binfo->bi_v.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+		binfo->bi_v.bi_vblocknr = cpu_to_le64(ptr);
+		binfo->bi_v.bi_blkoff = cpu_to_le64(key);
 	}
 	return ret;
 }
 
-static int nilfs_direct_assign_p(struct nilfs_direct *direct,
+static int nilfs_direct_assign_p(struct nilfs_bmap *direct,
 				 __u64 key, __u64 ptr,
 				 struct buffer_head **bh,
 				 sector_t blocknr,
@@ -329,7 +309,7 @@ static int nilfs_direct_assign_p(struct nilfs_direct *direct,
 {
 	nilfs_direct_set_ptr(direct, key, blocknr);
 
-	binfo->bi_dat.bi_blkoff = nilfs_bmap_key_to_dkey(key);
+	binfo->bi_dat.bi_blkoff = cpu_to_le64(key);
 	binfo->bi_dat.bi_level = 0;
 
 	return 0;
@@ -340,18 +320,16 @@ static int nilfs_direct_assign(struct nilfs_bmap *bmap,
 			       sector_t blocknr,
 			       union nilfs_binfo *binfo)
 {
-	struct nilfs_direct *direct;
 	__u64 key;
 	__u64 ptr;
 
-	direct = (struct nilfs_direct *)bmap;
 	key = nilfs_bmap_data_get_key(bmap, *bh);
 	if (unlikely(key > NILFS_DIRECT_KEY_MAX)) {
 		printk(KERN_CRIT "%s: invalid key: %llu\n", __func__,
 		       (unsigned long long)key);
 		return -EINVAL;
 	}
-	ptr = nilfs_direct_get_ptr(direct, key);
+	ptr = nilfs_direct_get_ptr(bmap, key);
 	if (unlikely(ptr == NILFS_BMAP_INVALID_PTR)) {
 		printk(KERN_CRIT "%s: invalid pointer: %llu\n", __func__,
 		       (unsigned long long)ptr);
@@ -359,8 +337,8 @@ static int nilfs_direct_assign(struct nilfs_bmap *bmap,
 	}
 
 	return NILFS_BMAP_USE_VBN(bmap) ?
-		nilfs_direct_assign_v(direct, key, ptr, bh, blocknr, binfo) :
-		nilfs_direct_assign_p(direct, key, ptr, bh, blocknr, binfo);
+		nilfs_direct_assign_v(bmap, key, ptr, bh, blocknr, binfo) :
+		nilfs_direct_assign_p(bmap, key, ptr, bh, blocknr, binfo);
 }
 
 static const struct nilfs_bmap_operations nilfs_direct_ops = {
diff --git a/fs/nilfs2/direct.h b/fs/nilfs2/direct.h
index a5ffd66e25d..dc643de20a2 100644
--- a/fs/nilfs2/direct.h
+++ b/fs/nilfs2/direct.h
@@ -28,8 +28,6 @@
 #include "bmap.h"
 
 
-struct nilfs_direct;
-
 /**
  * struct nilfs_direct_node - direct node
  * @dn_flags: flags
@@ -40,15 +38,6 @@ struct nilfs_direct_node {
 	__u8 pad[7];
 };
 
-/**
- * struct nilfs_direct - direct mapping
- * @d_bmap: bmap structure
- */
-struct nilfs_direct {
-	struct nilfs_bmap d_bmap;
-};
-
-
 #define NILFS_DIRECT_NBLOCKS	(NILFS_BMAP_SIZE / sizeof(__le64) - 1)
 #define NILFS_DIRECT_KEY_MIN	0
 #define NILFS_DIRECT_KEY_MAX	(NILFS_DIRECT_NBLOCKS - 1)
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 145f03cd7d3..bed3a783129 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -48,6 +48,8 @@
 #include <linux/slab.h>
 #include <linux/swap.h>
 #include "nilfs.h"
+#include "btree.h"
+#include "btnode.h"
 #include "page.h"
 #include "mdt.h"
 #include "dat.h"
@@ -149,8 +151,10 @@ int nilfs_gccache_submit_read_data(struct inode *inode, sector_t blkoff,
 int nilfs_gccache_submit_read_node(struct inode *inode, sector_t pbn,
 				   __u64 vbn, struct buffer_head **out_bh)
 {
-	int ret = nilfs_btnode_submit_block(&NILFS_I(inode)->i_btnode_cache,
-					    vbn ? : pbn, pbn, out_bh);
+	int ret;
+
+	ret = nilfs_btnode_submit_block(&NILFS_I(inode)->i_btnode_cache,
+					vbn ? : pbn, pbn, READ, out_bh, &pbn);
 	if (ret == -EEXIST) /* internal code (cache hit) */
 		ret = 0;
 	return ret;
@@ -164,10 +168,15 @@ int nilfs_gccache_wait_and_mark_dirty(struct buffer_head *bh)
 	if (buffer_dirty(bh))
 		return -EEXIST;
 
-	if (buffer_nilfs_node(bh))
+	if (buffer_nilfs_node(bh)) {
+		if (nilfs_btree_broken_node_block(bh)) {
+			clear_buffer_uptodate(bh);
+			return -EIO;
+		}
 		nilfs_btnode_mark_dirty(bh);
-	else
+	} else {
 		nilfs_mdt_mark_buffer_dirty(bh);
+	}
 	return 0;
 }
 
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 024be8c35bb..d01aff4957d 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -28,6 +28,7 @@
 #include <linux/swap.h>
 #include <linux/slab.h>
 #include "nilfs.h"
+#include "btnode.h"
 #include "segment.h"
 #include "page.h"
 #include "mdt.h"
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 47d6d792812..0842d775b3e 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -32,7 +32,6 @@
 #include "the_nilfs.h"
 #include "sb.h"
 #include "bmap.h"
-#include "bmap_union.h"
 
 /*
  * nilfs inode data in memory
@@ -41,7 +40,7 @@ struct nilfs_inode_info {
 	__u32 i_flags;
 	unsigned long  i_state;		/* Dynamic state flags */
 	struct nilfs_bmap *i_bmap;
-	union nilfs_bmap_union i_bmap_union;
+	struct nilfs_bmap i_bmap_data;
 	__u64 i_xattr;	/* sector_t ??? */
 	__u32 i_dir_start_lookup;
 	__u64 i_cno;		/* check point number for GC inode */
@@ -71,9 +70,7 @@ static inline struct nilfs_inode_info *NILFS_I(const struct inode *inode)
 static inline struct nilfs_inode_info *
 NILFS_BMAP_I(const struct nilfs_bmap *bmap)
 {
-	return container_of((union nilfs_bmap_union *)bmap,
-			    struct nilfs_inode_info,
-			    i_bmap_union);
+	return container_of(bmap, struct nilfs_inode_info, i_bmap_data);
 }
 
 static inline struct inode *NILFS_BTNC_I(struct address_space *btnc)
@@ -107,6 +104,14 @@ enum {
 };
 
 /*
+ * commit flags for nilfs_commit_super and nilfs_sync_super
+ */
+enum {
+	NILFS_SB_COMMIT = 0,	/* Commit a super block alternately */
+	NILFS_SB_COMMIT_ALL	/* Commit both super blocks */
+};
+
+/*
  * Macros to check inode numbers
  */
 #define NILFS_MDT_INO_BITS   \
@@ -270,7 +275,14 @@ extern struct nilfs_super_block *
 nilfs_read_super_block(struct super_block *, u64, int, struct buffer_head **);
 extern int nilfs_store_magic_and_option(struct super_block *,
 					struct nilfs_super_block *, char *);
+extern int nilfs_check_feature_compatibility(struct super_block *,
+					     struct nilfs_super_block *);
+extern void nilfs_set_log_cursor(struct nilfs_super_block *,
+				 struct the_nilfs *);
+extern struct nilfs_super_block **nilfs_prepare_super(struct nilfs_sb_info *,
+						      int flip);
 extern int nilfs_commit_super(struct nilfs_sb_info *, int);
+extern int nilfs_cleanup_super(struct nilfs_sb_info *);
 extern int nilfs_attach_checkpoint(struct nilfs_sb_info *, __u64);
 extern void nilfs_detach_checkpoint(struct nilfs_sb_info *);
 
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 8de3e1e4813..aab11db2cb0 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -37,7 +37,8 @@
 
 #define NILFS_BUFFER_INHERENT_BITS  \
 	((1UL << BH_Uptodate) | (1UL << BH_Mapped) | (1UL << BH_NILFS_Node) | \
-	 (1UL << BH_NILFS_Volatile) | (1UL << BH_NILFS_Allocated))
+	 (1UL << BH_NILFS_Volatile) | (1UL << BH_NILFS_Allocated) | \
+	 (1UL << BH_NILFS_Checked))
 
 static struct buffer_head *
 __nilfs_get_page_block(struct page *page, unsigned long block, pgoff_t index,
@@ -129,6 +130,7 @@ void nilfs_forget_buffer(struct buffer_head *bh)
 
 	lock_buffer(bh);
 	clear_buffer_nilfs_volatile(bh);
+	clear_buffer_nilfs_checked(bh);
 	clear_buffer_dirty(bh);
 	if (nilfs_page_buffers_clean(page))
 		__nilfs_clear_page_dirty(page);
@@ -480,6 +482,7 @@ void nilfs_clear_dirty_pages(struct address_space *mapping)
 				lock_buffer(bh);
 				clear_buffer_dirty(bh);
 				clear_buffer_nilfs_volatile(bh);
+				clear_buffer_nilfs_checked(bh);
 				clear_buffer_uptodate(bh);
 				clear_buffer_mapped(bh);
 				unlock_buffer(bh);
diff --git a/fs/nilfs2/page.h b/fs/nilfs2/page.h
index 8abca4d1c1f..f53d8da41ed 100644
--- a/fs/nilfs2/page.h
+++ b/fs/nilfs2/page.h
@@ -34,11 +34,13 @@ enum {
 	BH_NILFS_Allocated = BH_PrivateStart,
 	BH_NILFS_Node,
 	BH_NILFS_Volatile,
+	BH_NILFS_Checked,
 };
 
 BUFFER_FNS(NILFS_Allocated, nilfs_allocated)	/* nilfs private buffers */
 BUFFER_FNS(NILFS_Node, nilfs_node)		/* nilfs node buffers */
 BUFFER_FNS(NILFS_Volatile, nilfs_volatile)
+BUFFER_FNS(NILFS_Checked, nilfs_checked)	/* buffer is verified */
 
 
 void nilfs_mark_buffer_dirty(struct buffer_head *bh);
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index bae2a516b4e..83e3d8c61a0 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -91,27 +91,9 @@ static int nilfs_warn_segment_error(int err)
 	return -EINVAL;
 }
 
-static void store_segsum_info(struct nilfs_segsum_info *ssi,
-			      struct nilfs_segment_summary *sum,
-			      unsigned int blocksize)
-{
-	ssi->flags = le16_to_cpu(sum->ss_flags);
-	ssi->seg_seq = le64_to_cpu(sum->ss_seq);
-	ssi->ctime = le64_to_cpu(sum->ss_create);
-	ssi->next = le64_to_cpu(sum->ss_next);
-	ssi->nblocks = le32_to_cpu(sum->ss_nblocks);
-	ssi->nfinfo = le32_to_cpu(sum->ss_nfinfo);
-	ssi->sumbytes = le32_to_cpu(sum->ss_sumbytes);
-
-	ssi->nsumblk = DIV_ROUND_UP(ssi->sumbytes, blocksize);
-	ssi->nfileblk = ssi->nblocks - ssi->nsumblk - !!NILFS_SEG_HAS_SR(ssi);
-
-	/* need to verify ->ss_bytes field if read ->ss_cno */
-}
-
 /**
- * calc_crc_cont - check CRC of blocks continuously
- * @sbi: nilfs_sb_info
+ * nilfs_compute_checksum - compute checksum of blocks continuously
+ * @nilfs: nilfs object
  * @bhs: buffer head of start block
  * @sum: place to store result
  * @offset: offset bytes in the first block
@@ -119,23 +101,25 @@ static void store_segsum_info(struct nilfs_segsum_info *ssi,
  * @start: DBN of start block
  * @nblock: number of blocks to be checked
  */
-static int calc_crc_cont(struct nilfs_sb_info *sbi, struct buffer_head *bhs,
-			 u32 *sum, unsigned long offset, u64 check_bytes,
-			 sector_t start, unsigned long nblock)
+static int nilfs_compute_checksum(struct the_nilfs *nilfs,
+				  struct buffer_head *bhs, u32 *sum,
+				  unsigned long offset, u64 check_bytes,
+				  sector_t start, unsigned long nblock)
 {
-	unsigned long blocksize = sbi->s_super->s_blocksize;
+	unsigned int blocksize = nilfs->ns_blocksize;
 	unsigned long size;
 	u32 crc;
 
 	BUG_ON(offset >= blocksize);
 	check_bytes -= offset;
 	size = min_t(u64, check_bytes, blocksize - offset);
-	crc = crc32_le(sbi->s_nilfs->ns_crc_seed,
+	crc = crc32_le(nilfs->ns_crc_seed,
 		       (unsigned char *)bhs->b_data + offset, size);
 	if (--nblock > 0) {
 		do {
-			struct buffer_head *bh
-				= sb_bread(sbi->s_super, ++start);
+			struct buffer_head *bh;
+
+			bh = __bread(nilfs->ns_bdev, ++start, blocksize);
 			if (!bh)
 				return -EIO;
 			check_bytes -= size;
@@ -150,12 +134,12 @@ static int calc_crc_cont(struct nilfs_sb_info *sbi, struct buffer_head *bhs,
 
 /**
  * nilfs_read_super_root_block - read super root block
- * @sb: super_block
+ * @nilfs: nilfs object
  * @sr_block: disk block number of the super root block
  * @pbh: address of a buffer_head pointer to return super root buffer
  * @check: CRC check flag
  */
-int nilfs_read_super_root_block(struct super_block *sb, sector_t sr_block,
+int nilfs_read_super_root_block(struct the_nilfs *nilfs, sector_t sr_block,
 				struct buffer_head **pbh, int check)
 {
 	struct buffer_head *bh_sr;
@@ -164,7 +148,7 @@ int nilfs_read_super_root_block(struct super_block *sb, sector_t sr_block,
 	int ret;
 
 	*pbh = NULL;
-	bh_sr = sb_bread(sb, sr_block);
+	bh_sr = __bread(nilfs->ns_bdev, sr_block, nilfs->ns_blocksize);
 	if (unlikely(!bh_sr)) {
 		ret = NILFS_SEG_FAIL_IO;
 		goto failed;
@@ -174,12 +158,13 @@ int nilfs_read_super_root_block(struct super_block *sb, sector_t sr_block,
 	if (check) {
 		unsigned bytes = le16_to_cpu(sr->sr_bytes);
 
-		if (bytes == 0 || bytes > sb->s_blocksize) {
+		if (bytes == 0 || bytes > nilfs->ns_blocksize) {
 			ret = NILFS_SEG_FAIL_CHECKSUM_SUPER_ROOT;
 			goto failed_bh;
 		}
-		if (calc_crc_cont(NILFS_SB(sb), bh_sr, &crc,
-				  sizeof(sr->sr_sum), bytes, sr_block, 1)) {
+		if (nilfs_compute_checksum(
+			    nilfs, bh_sr, &crc, sizeof(sr->sr_sum), bytes,
+			    sr_block, 1)) {
 			ret = NILFS_SEG_FAIL_IO;
 			goto failed_bh;
 		}
@@ -199,64 +184,76 @@ int nilfs_read_super_root_block(struct super_block *sb, sector_t sr_block,
 }
 
 /**
- * load_segment_summary - read segment summary of the specified partial segment
- * @sbi: nilfs_sb_info
- * @pseg_start: start disk block number of partial segment
- * @seg_seq: sequence number requested
- * @ssi: pointer to nilfs_segsum_info struct to store information
+ * nilfs_read_log_header - read summary header of the specified log
+ * @nilfs: nilfs object
+ * @start_blocknr: start block number of the log
+ * @sum: pointer to return segment summary structure
  */
-static int
-load_segment_summary(struct nilfs_sb_info *sbi, sector_t pseg_start,
-		     u64 seg_seq, struct nilfs_segsum_info *ssi)
+static struct buffer_head *
+nilfs_read_log_header(struct the_nilfs *nilfs, sector_t start_blocknr,
+		      struct nilfs_segment_summary **sum)
 {
 	struct buffer_head *bh_sum;
-	struct nilfs_segment_summary *sum;
+
+	bh_sum = __bread(nilfs->ns_bdev, start_blocknr, nilfs->ns_blocksize);
+	if (bh_sum)
+		*sum = (struct nilfs_segment_summary *)bh_sum->b_data;
+	return bh_sum;
+}
+
+/**
+ * nilfs_validate_log - verify consistency of log
+ * @nilfs: nilfs object
+ * @seg_seq: sequence number of segment
+ * @bh_sum: buffer head of summary block
+ * @sum: segment summary struct
+ */
+static int nilfs_validate_log(struct the_nilfs *nilfs, u64 seg_seq,
+			      struct buffer_head *bh_sum,
+			      struct nilfs_segment_summary *sum)
+{
 	unsigned long nblock;
 	u32 crc;
-	int ret = NILFS_SEG_FAIL_IO;
+	int ret;
 
-	bh_sum = sb_bread(sbi->s_super, pseg_start);
-	if (!bh_sum)
+	ret = NILFS_SEG_FAIL_MAGIC;
+	if (le32_to_cpu(sum->ss_magic) != NILFS_SEGSUM_MAGIC)
 		goto out;
 
-	sum = (struct nilfs_segment_summary *)bh_sum->b_data;
-
-	/* Check consistency of segment summary */
-	if (le32_to_cpu(sum->ss_magic) != NILFS_SEGSUM_MAGIC) {
-		ret = NILFS_SEG_FAIL_MAGIC;
-		goto failed;
-	}
-	store_segsum_info(ssi, sum, sbi->s_super->s_blocksize);
-	if (seg_seq != ssi->seg_seq) {
-		ret = NILFS_SEG_FAIL_SEQ;
-		goto failed;
-	}
+	ret = NILFS_SEG_FAIL_SEQ;
+	if (le64_to_cpu(sum->ss_seq) != seg_seq)
+		goto out;
 
-	nblock = ssi->nblocks;
-	if (unlikely(nblock == 0 ||
-		     nblock > sbi->s_nilfs->ns_blocks_per_segment)) {
+	nblock = le32_to_cpu(sum->ss_nblocks);
+	ret = NILFS_SEG_FAIL_CONSISTENCY;
+	if (unlikely(nblock == 0 || nblock > nilfs->ns_blocks_per_segment))
 		/* This limits the number of blocks read in the CRC check */
-		ret = NILFS_SEG_FAIL_CONSISTENCY;
-		goto failed;
-	}
-	if (calc_crc_cont(sbi, bh_sum, &crc, sizeof(sum->ss_datasum),
-			  ((u64)nblock << sbi->s_super->s_blocksize_bits),
-			  pseg_start, nblock)) {
-		ret = NILFS_SEG_FAIL_IO;
-		goto failed;
-	}
-	if (crc == le32_to_cpu(sum->ss_datasum))
-		ret = 0;
-	else
-		ret = NILFS_SEG_FAIL_CHECKSUM_FULL;
- failed:
-	brelse(bh_sum);
- out:
+		goto out;
+
+	ret = NILFS_SEG_FAIL_IO;
+	if (nilfs_compute_checksum(nilfs, bh_sum, &crc, sizeof(sum->ss_datasum),
+				   ((u64)nblock << nilfs->ns_blocksize_bits),
+				   bh_sum->b_blocknr, nblock))
+		goto out;
+
+	ret = NILFS_SEG_FAIL_CHECKSUM_FULL;
+	if (crc != le32_to_cpu(sum->ss_datasum))
+		goto out;
+	ret = 0;
+out:
 	return ret;
 }
 
-static void *segsum_get(struct super_block *sb, struct buffer_head **pbh,
-			unsigned int *offset, unsigned int bytes)
+/**
+ * nilfs_read_summary_info - read an item on summary blocks of a log
+ * @nilfs: nilfs object
+ * @pbh: the current buffer head on summary blocks [in, out]
+ * @offset: the current byte offset on summary blocks [in, out]
+ * @bytes: byte size of the item to be read
+ */
+static void *nilfs_read_summary_info(struct the_nilfs *nilfs,
+				     struct buffer_head **pbh,
+				     unsigned int *offset, unsigned int bytes)
 {
 	void *ptr;
 	sector_t blocknr;
@@ -265,7 +262,8 @@ static void *segsum_get(struct super_block *sb, struct buffer_head **pbh,
 	if (bytes > (*pbh)->b_size - *offset) {
 		blocknr = (*pbh)->b_blocknr;
 		brelse(*pbh);
-		*pbh = sb_bread(sb, blocknr + 1);
+		*pbh = __bread(nilfs->ns_bdev, blocknr + 1,
+			       nilfs->ns_blocksize);
 		if (unlikely(!*pbh))
 			return NULL;
 		*offset = 0;
@@ -275,9 +273,18 @@ static void *segsum_get(struct super_block *sb, struct buffer_head **pbh,
 	return ptr;
 }
 
-static void segsum_skip(struct super_block *sb, struct buffer_head **pbh,
-			unsigned int *offset, unsigned int bytes,
-			unsigned long count)
+/**
+ * nilfs_skip_summary_info - skip items on summary blocks of a log
+ * @nilfs: nilfs object
+ * @pbh: the current buffer head on summary blocks [in, out]
+ * @offset: the current byte offset on summary blocks [in, out]
+ * @bytes: byte size of the item to be skipped
+ * @count: number of items to be skipped
+ */
+static void nilfs_skip_summary_info(struct the_nilfs *nilfs,
+				    struct buffer_head **pbh,
+				    unsigned int *offset, unsigned int bytes,
+				    unsigned long count)
 {
 	unsigned int rest_item_in_current_block
 		= ((*pbh)->b_size - *offset) / bytes;
@@ -294,36 +301,46 @@ static void segsum_skip(struct super_block *sb, struct buffer_head **pbh,
 		*offset = bytes * (count - (bcnt - 1) * nitem_per_block);
 
 		brelse(*pbh);
-		*pbh = sb_bread(sb, blocknr + bcnt);
+		*pbh = __bread(nilfs->ns_bdev, blocknr + bcnt,
+			       nilfs->ns_blocksize);
 	}
 }
 
-static int
-collect_blocks_from_segsum(struct nilfs_sb_info *sbi, sector_t sum_blocknr,
-			   struct nilfs_segsum_info *ssi,
-			   struct list_head *head)
+/**
+ * nilfs_scan_dsync_log - get block information of a log written for data sync
+ * @nilfs: nilfs object
+ * @start_blocknr: start block number of the log
+ * @sum: log summary information
+ * @head: list head to add nilfs_recovery_block struct
+ */
+static int nilfs_scan_dsync_log(struct the_nilfs *nilfs, sector_t start_blocknr,
+				struct nilfs_segment_summary *sum,
+				struct list_head *head)
 {
 	struct buffer_head *bh;
 	unsigned int offset;
-	unsigned long nfinfo = ssi->nfinfo;
-	sector_t blocknr = sum_blocknr + ssi->nsumblk;
+	u32 nfinfo, sumbytes;
+	sector_t blocknr;
 	ino_t ino;
 	int err = -EIO;
 
+	nfinfo = le32_to_cpu(sum->ss_nfinfo);
 	if (!nfinfo)
 		return 0;
 
-	bh = sb_bread(sbi->s_super, sum_blocknr);
+	sumbytes = le32_to_cpu(sum->ss_sumbytes);
+	blocknr = start_blocknr + DIV_ROUND_UP(sumbytes, nilfs->ns_blocksize);
+	bh = __bread(nilfs->ns_bdev, start_blocknr, nilfs->ns_blocksize);
 	if (unlikely(!bh))
 		goto out;
 
-	offset = le16_to_cpu(
-		((struct nilfs_segment_summary *)bh->b_data)->ss_bytes);
+	offset = le16_to_cpu(sum->ss_bytes);
 	for (;;) {
 		unsigned long nblocks, ndatablk, nnodeblk;
 		struct nilfs_finfo *finfo;
 
-		finfo = segsum_get(sbi->s_super, &bh, &offset, sizeof(*finfo));
+		finfo = nilfs_read_summary_info(nilfs, &bh, &offset,
+						sizeof(*finfo));
 		if (unlikely(!finfo))
 			goto out;
 
@@ -336,8 +353,8 @@ collect_blocks_from_segsum(struct nilfs_sb_info *sbi, sector_t sum_blocknr,
 			struct nilfs_recovery_block *rb;
 			struct nilfs_binfo_v *binfo;
 
-			binfo = segsum_get(sbi->s_super, &bh, &offset,
-					   sizeof(*binfo));
+			binfo = nilfs_read_summary_info(nilfs, &bh, &offset,
+							sizeof(*binfo));
 			if (unlikely(!binfo))
 				goto out;
 
@@ -355,9 +372,9 @@ collect_blocks_from_segsum(struct nilfs_sb_info *sbi, sector_t sum_blocknr,
 		}
 		if (--nfinfo == 0)
 			break;
-		blocknr += nnodeblk; /* always 0 for the data sync segments */
-		segsum_skip(sbi->s_super, &bh, &offset, sizeof(__le64),
-			    nnodeblk);
+		blocknr += nnodeblk; /* always 0 for data sync logs */
+		nilfs_skip_summary_info(nilfs, &bh, &offset, sizeof(__le64),
+					nnodeblk);
 		if (unlikely(!bh))
 			goto out;
 	}
@@ -467,14 +484,14 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
 	return err;
 }
 
-static int nilfs_recovery_copy_block(struct nilfs_sb_info *sbi,
+static int nilfs_recovery_copy_block(struct the_nilfs *nilfs,
 				     struct nilfs_recovery_block *rb,
 				     struct page *page)
 {
 	struct buffer_head *bh_org;
 	void *kaddr;
 
-	bh_org = sb_bread(sbi->s_super, rb->blocknr);
+	bh_org = __bread(nilfs->ns_bdev, rb->blocknr, nilfs->ns_blocksize);
 	if (unlikely(!bh_org))
 		return -EIO;
 
@@ -485,13 +502,14 @@ static int nilfs_recovery_copy_block(struct nilfs_sb_info *sbi,
 	return 0;
 }
 
-static int recover_dsync_blocks(struct nilfs_sb_info *sbi,
-				struct list_head *head,
-				unsigned long *nr_salvaged_blocks)
+static int nilfs_recover_dsync_blocks(struct the_nilfs *nilfs,
+				      struct nilfs_sb_info *sbi,
+				      struct list_head *head,
+				      unsigned long *nr_salvaged_blocks)
 {
 	struct inode *inode;
 	struct nilfs_recovery_block *rb, *n;
-	unsigned blocksize = sbi->s_super->s_blocksize;
+	unsigned blocksize = nilfs->ns_blocksize;
 	struct page *page;
 	loff_t pos;
 	int err = 0, err2 = 0;
@@ -511,7 +529,7 @@ static int recover_dsync_blocks(struct nilfs_sb_info *sbi,
 		if (unlikely(err))
 			goto failed_inode;
 
-		err = nilfs_recovery_copy_block(sbi, rb, page);
+		err = nilfs_recovery_copy_block(nilfs, rb, page);
 		if (unlikely(err))
 			goto failed_page;
 
@@ -551,18 +569,20 @@ static int recover_dsync_blocks(struct nilfs_sb_info *sbi,
 /**
  * nilfs_do_roll_forward - salvage logical segments newer than the latest
  * checkpoint
+ * @nilfs: nilfs object
  * @sbi: nilfs_sb_info
- * @nilfs: the_nilfs
  * @ri: pointer to a nilfs_recovery_info
  */
 static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
 				 struct nilfs_sb_info *sbi,
 				 struct nilfs_recovery_info *ri)
 {
-	struct nilfs_segsum_info ssi;
+	struct buffer_head *bh_sum = NULL;
+	struct nilfs_segment_summary *sum;
 	sector_t pseg_start;
 	sector_t seg_start, seg_end;  /* Starting/ending DBN of full segment */
 	unsigned long nsalvaged_blocks = 0;
+	unsigned int flags;
 	u64 seg_seq;
 	__u64 segnum, nextnum = 0;
 	int empty_seg = 0;
@@ -581,8 +601,14 @@ static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
 	nilfs_get_segment_range(nilfs, segnum, &seg_start, &seg_end);
 
 	while (segnum != ri->ri_segnum || pseg_start <= ri->ri_pseg_start) {
+		brelse(bh_sum);
+		bh_sum = nilfs_read_log_header(nilfs, pseg_start, &sum);
+		if (!bh_sum) {
+			err = -EIO;
+			goto failed;
+		}
 
-		ret = load_segment_summary(sbi, pseg_start, seg_seq, &ssi);
+		ret = nilfs_validate_log(nilfs, seg_seq, bh_sum, sum);
 		if (ret) {
 			if (ret == NILFS_SEG_FAIL_IO) {
 				err = -EIO;
@@ -590,33 +616,38 @@ static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
 			}
 			goto strayed;
 		}
-		if (unlikely(NILFS_SEG_HAS_SR(&ssi)))
+
+		flags = le16_to_cpu(sum->ss_flags);
+		if (flags & NILFS_SS_SR)
 			goto confused;
 
 		/* Found a valid partial segment; do recovery actions */
-		nextnum = nilfs_get_segnum_of_block(nilfs, ssi.next);
+		nextnum = nilfs_get_segnum_of_block(nilfs,
+						    le64_to_cpu(sum->ss_next));
 		empty_seg = 0;
-		nilfs->ns_ctime = ssi.ctime;
-		if (!(ssi.flags & NILFS_SS_GC))
-			nilfs->ns_nongc_ctime = ssi.ctime;
+		nilfs->ns_ctime = le64_to_cpu(sum->ss_create);
+		if (!(flags & NILFS_SS_GC))
+			nilfs->ns_nongc_ctime = nilfs->ns_ctime;
 
 		switch (state) {
 		case RF_INIT_ST:
-			if (!NILFS_SEG_LOGBGN(&ssi) || !NILFS_SEG_DSYNC(&ssi))
+			if (!(flags & NILFS_SS_LOGBGN) ||
+			    !(flags & NILFS_SS_SYNDT))
 				goto try_next_pseg;
 			state = RF_DSYNC_ST;
 			/* Fall through */
 		case RF_DSYNC_ST:
-			if (!NILFS_SEG_DSYNC(&ssi))
+			if (!(flags & NILFS_SS_SYNDT))
 				goto confused;
 
-			err = collect_blocks_from_segsum(
-				sbi, pseg_start, &ssi, &dsync_blocks);
+			err = nilfs_scan_dsync_log(nilfs, pseg_start, sum,
+						   &dsync_blocks);
 			if (unlikely(err))
 				goto failed;
-			if (NILFS_SEG_LOGEND(&ssi)) {
-				err = recover_dsync_blocks(
-					sbi, &dsync_blocks, &nsalvaged_blocks);
+			if (flags & NILFS_SS_LOGEND) {
+				err = nilfs_recover_dsync_blocks(
+					nilfs, sbi, &dsync_blocks,
+					&nsalvaged_blocks);
 				if (unlikely(err))
 					goto failed;
 				state = RF_INIT_ST;
@@ -627,7 +658,7 @@ static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
  try_next_pseg:
 		if (pseg_start == ri->ri_lsegs_end)
 			break;
-		pseg_start += ssi.nblocks;
+		pseg_start += le32_to_cpu(sum->ss_nblocks);
 		if (pseg_start < seg_end)
 			continue;
 		goto feed_segment;
@@ -652,8 +683,9 @@ static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
 		ri->ri_need_recovery = NILFS_RECOVERY_ROLLFORWARD_DONE;
 	}
  out:
+	brelse(bh_sum);
 	dispose_recovery_list(&dsync_blocks);
-	nilfs_detach_writer(sbi->s_nilfs, sbi);
+	nilfs_detach_writer(nilfs, sbi);
 	return err;
 
  confused:
@@ -667,7 +699,6 @@ static int nilfs_do_roll_forward(struct the_nilfs *nilfs,
 }
 
 static void nilfs_finish_roll_forward(struct the_nilfs *nilfs,
-				      struct nilfs_sb_info *sbi,
 				      struct nilfs_recovery_info *ri)
 {
 	struct buffer_head *bh;
@@ -677,7 +708,7 @@ static void nilfs_finish_roll_forward(struct the_nilfs *nilfs,
 	    nilfs_get_segnum_of_block(nilfs, ri->ri_super_root))
 		return;
 
-	bh = sb_getblk(sbi->s_super, ri->ri_lsegs_start);
+	bh = __getblk(nilfs->ns_bdev, ri->ri_lsegs_start, nilfs->ns_blocksize);
 	BUG_ON(!bh);
 	memset(bh->b_data, 0, bh->b_size);
 	set_buffer_dirty(bh);
@@ -690,9 +721,8 @@ static void nilfs_finish_roll_forward(struct the_nilfs *nilfs,
 }
 
 /**
- * nilfs_recover_logical_segments - salvage logical segments written after
- * the latest super root
- * @nilfs: the_nilfs
+ * nilfs_salvage_orphan_logs - salvage logs written after the latest checkpoint
+ * @nilfs: nilfs object
  * @sbi: nilfs_sb_info
  * @ri: pointer to a nilfs_recovery_info struct to store search results.
  *
@@ -709,9 +739,9 @@ static void nilfs_finish_roll_forward(struct the_nilfs *nilfs,
  *
  * %-ENOMEM - Insufficient memory available.
  */
-int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
-				   struct nilfs_sb_info *sbi,
-				   struct nilfs_recovery_info *ri)
+int nilfs_salvage_orphan_logs(struct the_nilfs *nilfs,
+			      struct nilfs_sb_info *sbi,
+			      struct nilfs_recovery_info *ri)
 {
 	int err;
 
@@ -751,7 +781,7 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
 			goto failed;
 		}
 
-		nilfs_finish_roll_forward(nilfs, sbi, ri);
+		nilfs_finish_roll_forward(nilfs, ri);
 	}
 
  failed:
@@ -762,7 +792,6 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
 /**
  * nilfs_search_super_root - search the latest valid super root
  * @nilfs: the_nilfs
- * @sbi: nilfs_sb_info
  * @ri: pointer to a nilfs_recovery_info struct to store search results.
  *
  * nilfs_search_super_root() looks for the latest super-root from a partial
@@ -775,14 +804,19 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
  * %-EINVAL - No valid segment found
  *
  * %-EIO - I/O error
+ *
+ * %-ENOMEM - Insufficient memory available.
  */
-int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
+int nilfs_search_super_root(struct the_nilfs *nilfs,
 			    struct nilfs_recovery_info *ri)
 {
-	struct nilfs_segsum_info ssi;
+	struct buffer_head *bh_sum = NULL;
+	struct nilfs_segment_summary *sum;
 	sector_t pseg_start, pseg_end, sr_pseg_start = 0;
 	sector_t seg_start, seg_end; /* range of full segment (block number) */
 	sector_t b, end;
+	unsigned long nblocks;
+	unsigned int flags;
 	u64 seg_seq;
 	__u64 segnum, nextnum = 0;
 	__u64 cno;
@@ -801,17 +835,24 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 	/* Read ahead segment */
 	b = seg_start;
 	while (b <= seg_end)
-		sb_breadahead(sbi->s_super, b++);
+		__breadahead(nilfs->ns_bdev, b++, nilfs->ns_blocksize);
 
 	for (;;) {
-		/* Load segment summary */
-		ret = load_segment_summary(sbi, pseg_start, seg_seq, &ssi);
+		brelse(bh_sum);
+		ret = NILFS_SEG_FAIL_IO;
+		bh_sum = nilfs_read_log_header(nilfs, pseg_start, &sum);
+		if (!bh_sum)
+			goto failed;
+
+		ret = nilfs_validate_log(nilfs, seg_seq, bh_sum, sum);
 		if (ret) {
 			if (ret == NILFS_SEG_FAIL_IO)
 				goto failed;
 			goto strayed;
 		}
-		pseg_end = pseg_start + ssi.nblocks - 1;
+
+		nblocks = le32_to_cpu(sum->ss_nblocks);
+		pseg_end = pseg_start + nblocks - 1;
 		if (unlikely(pseg_end > seg_end)) {
 			ret = NILFS_SEG_FAIL_CONSISTENCY;
 			goto strayed;
@@ -821,11 +862,13 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 		ri->ri_pseg_start = pseg_start;
 		ri->ri_seq = seg_seq;
 		ri->ri_segnum = segnum;
-		nextnum = nilfs_get_segnum_of_block(nilfs, ssi.next);
+		nextnum = nilfs_get_segnum_of_block(nilfs,
+						    le64_to_cpu(sum->ss_next));
 		ri->ri_nextnum = nextnum;
 		empty_seg = 0;
 
-		if (!NILFS_SEG_HAS_SR(&ssi) && !scan_newer) {
+		flags = le16_to_cpu(sum->ss_flags);
+		if (!(flags & NILFS_SS_SR) && !scan_newer) {
 			/* This will never happen because a superblock
 			   (last_segment) always points to a pseg
 			   having a super root. */
@@ -836,14 +879,15 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 		if (pseg_start == seg_start) {
 			nilfs_get_segment_range(nilfs, nextnum, &b, &end);
 			while (b <= end)
-				sb_breadahead(sbi->s_super, b++);
+				__breadahead(nilfs->ns_bdev, b++,
+					     nilfs->ns_blocksize);
 		}
-		if (!NILFS_SEG_HAS_SR(&ssi)) {
-			if (!ri->ri_lsegs_start && NILFS_SEG_LOGBGN(&ssi)) {
+		if (!(flags & NILFS_SS_SR)) {
+			if (!ri->ri_lsegs_start && (flags & NILFS_SS_LOGBGN)) {
 				ri->ri_lsegs_start = pseg_start;
 				ri->ri_lsegs_start_seq = seg_seq;
 			}
-			if (NILFS_SEG_LOGEND(&ssi))
+			if (flags & NILFS_SS_LOGEND)
 				ri->ri_lsegs_end = pseg_start;
 			goto try_next_pseg;
 		}
@@ -854,12 +898,12 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 		ri->ri_lsegs_start = ri->ri_lsegs_end = 0;
 
 		nilfs_dispose_segment_list(&segments);
-		nilfs->ns_pseg_offset = (sr_pseg_start = pseg_start)
-			+ ssi.nblocks - seg_start;
+		sr_pseg_start = pseg_start;
+		nilfs->ns_pseg_offset = pseg_start + nblocks - seg_start;
 		nilfs->ns_seg_seq = seg_seq;
 		nilfs->ns_segnum = segnum;
 		nilfs->ns_cno = cno;  /* nilfs->ns_cno = ri->ri_cno + 1 */
-		nilfs->ns_ctime = ssi.ctime;
+		nilfs->ns_ctime = le64_to_cpu(sum->ss_create);
 		nilfs->ns_nextnum = nextnum;
 
 		if (scan_newer)
@@ -870,15 +914,9 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 			scan_newer = 1;
 		}
 
-		/* reset region for roll-forward */
-		pseg_start += ssi.nblocks;
-		if (pseg_start < seg_end)
-			continue;
-		goto feed_segment;
-
  try_next_pseg:
 		/* Standing on a course, or met an inconsistent state */
-		pseg_start += ssi.nblocks;
+		pseg_start += nblocks;
 		if (pseg_start < seg_end)
 			continue;
 		goto feed_segment;
@@ -909,6 +947,7 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 
  super_root_found:
 	/* Updating pointers relating to the latest checkpoint */
+	brelse(bh_sum);
 	list_splice_tail(&segments, &ri->ri_used_segments);
 	nilfs->ns_last_pseg = sr_pseg_start;
 	nilfs->ns_last_seq = nilfs->ns_seg_seq;
@@ -916,6 +955,7 @@ int nilfs_search_super_root(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi,
 	return 0;
 
  failed:
+	brelse(bh_sum);
 	nilfs_dispose_segment_list(&segments);
 	return (ret < 0) ? ret : nilfs_warn_segment_error(ret);
 }
diff --git a/fs/nilfs2/segbuf.h b/fs/nilfs2/segbuf.h
index 85fbb66455e..b04f08cc239 100644
--- a/fs/nilfs2/segbuf.h
+++ b/fs/nilfs2/segbuf.h
@@ -54,17 +54,6 @@ struct nilfs_segsum_info {
 	sector_t		next;
 };
 
-/* macro for the flags */
-#define NILFS_SEG_HAS_SR(sum)    ((sum)->flags & NILFS_SS_SR)
-#define NILFS_SEG_LOGBGN(sum)    ((sum)->flags & NILFS_SS_LOGBGN)
-#define NILFS_SEG_LOGEND(sum)    ((sum)->flags & NILFS_SS_LOGEND)
-#define NILFS_SEG_DSYNC(sum)     ((sum)->flags & NILFS_SS_SYNDT)
-#define NILFS_SEG_SIMPLEX(sum) \
-	(((sum)->flags & (NILFS_SS_LOGBGN | NILFS_SS_LOGEND)) == \
-	 (NILFS_SS_LOGBGN | NILFS_SS_LOGEND))
-
-#define NILFS_SEG_EMPTY(sum)	((sum)->nblocks == (sum)->nsumblk)
-
 /**
  * struct nilfs_segment_buffer - Segment buffer
  * @sb_super: back pointer to a superblock struct
@@ -141,6 +130,19 @@ int nilfs_segbuf_extend_payload(struct nilfs_segment_buffer *,
 				struct buffer_head **);
 void nilfs_segbuf_fill_in_segsum(struct nilfs_segment_buffer *);
 
+static inline int nilfs_segbuf_simplex(struct nilfs_segment_buffer *segbuf)
+{
+	unsigned int flags = segbuf->sb_sum.flags;
+
+	return (flags & (NILFS_SS_LOGBGN | NILFS_SS_LOGEND)) ==
+		(NILFS_SS_LOGBGN | NILFS_SS_LOGEND);
+}
+
+static inline int nilfs_segbuf_empty(struct nilfs_segment_buffer *segbuf)
+{
+	return segbuf->sb_sum.nblocks == segbuf->sb_sum.nsumblk;
+}
+
 static inline void
 nilfs_segbuf_add_segsum_buffer(struct nilfs_segment_buffer *segbuf,
 			       struct buffer_head *bh)
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index c9201649cc4..9fd051a33c4 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1914,12 +1914,12 @@ static void nilfs_segctor_complete_write(struct nilfs_sc_info *sci)
 			}
 		}
 
-		if (!NILFS_SEG_SIMPLEX(&segbuf->sb_sum)) {
-			if (NILFS_SEG_LOGBGN(&segbuf->sb_sum)) {
+		if (!nilfs_segbuf_simplex(segbuf)) {
+			if (segbuf->sb_sum.flags & NILFS_SS_LOGBGN) {
 				set_bit(NILFS_SC_UNCLOSED, &sci->sc_flags);
 				sci->sc_lseg_stime = jiffies;
 			}
-			if (NILFS_SEG_LOGEND(&segbuf->sb_sum))
+			if (segbuf->sb_sum.flags & NILFS_SS_LOGEND)
 				clear_bit(NILFS_SC_UNCLOSED, &sci->sc_flags);
 		}
 	}
@@ -1951,7 +1951,6 @@ static void nilfs_segctor_complete_write(struct nilfs_sc_info *sci)
 	if (update_sr) {
 		nilfs_set_last_segment(nilfs, segbuf->sb_pseg_start,
 				       segbuf->sb_sum.seg_seq, nilfs->ns_cno++);
-		set_nilfs_sb_dirty(nilfs);
 
 		clear_bit(NILFS_SC_HAVE_DELTA, &sci->sc_flags);
 		clear_bit(NILFS_SC_DIRTY, &sci->sc_flags);
@@ -2082,7 +2081,7 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode)
 
 		/* Avoid empty segment */
 		if (sci->sc_stage.scnt == NILFS_ST_DONE &&
-		    NILFS_SEG_EMPTY(&sci->sc_curseg->sb_sum)) {
+		    nilfs_segbuf_empty(sci->sc_curseg)) {
 			nilfs_segctor_abort_construction(sci, nilfs, 1);
 			goto out;
 		}
@@ -2408,6 +2407,7 @@ static int nilfs_segctor_construct(struct nilfs_sc_info *sci, int mode)
 {
 	struct nilfs_sb_info *sbi = sci->sc_sbi;
 	struct the_nilfs *nilfs = sbi->s_nilfs;
+	struct nilfs_super_block **sbp;
 	int err = 0;
 
 	nilfs_segctor_accept(sci);
@@ -2423,8 +2423,13 @@ static int nilfs_segctor_construct(struct nilfs_sc_info *sci, int mode)
 		if (test_bit(NILFS_SC_SUPER_ROOT, &sci->sc_flags) &&
 		    nilfs_discontinued(nilfs)) {
 			down_write(&nilfs->ns_sem);
-			err = nilfs_commit_super(
-				sbi, nilfs_altsb_need_update(nilfs));
+			err = -EIO;
+			sbp = nilfs_prepare_super(sbi,
+						  nilfs_sb_will_flip(nilfs));
+			if (likely(sbp)) {
+				nilfs_set_log_cursor(sbp[0], nilfs);
+				err = nilfs_commit_super(sbi, NILFS_SB_COMMIT);
+			}
 			up_write(&nilfs->ns_sem);
 		}
 	}
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index 01e20dbb217..17c487bd815 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -234,13 +234,13 @@ extern int nilfs_attach_segment_constructor(struct nilfs_sb_info *);
 extern void nilfs_detach_segment_constructor(struct nilfs_sb_info *);
 
 /* recovery.c */
-extern int nilfs_read_super_root_block(struct super_block *, sector_t,
+extern int nilfs_read_super_root_block(struct the_nilfs *, sector_t,
 				       struct buffer_head **, int);
-extern int nilfs_search_super_root(struct the_nilfs *, struct nilfs_sb_info *,
+extern int nilfs_search_super_root(struct the_nilfs *,
 				   struct nilfs_recovery_info *);
-extern int nilfs_recover_logical_segments(struct the_nilfs *,
-					  struct nilfs_sb_info *,
-					  struct nilfs_recovery_info *);
+extern int nilfs_salvage_orphan_logs(struct the_nilfs *,
+				     struct nilfs_sb_info *,
+				     struct nilfs_recovery_info *);
 extern void nilfs_dispose_segment_list(struct list_head *);
 
 #endif /* _NILFS_SEGMENT_H */
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index 414ef68931c..26078b3407c 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -55,6 +55,8 @@
 #include "nilfs.h"
 #include "mdt.h"
 #include "alloc.h"
+#include "btree.h"
+#include "btnode.h"
 #include "page.h"
 #include "cpfile.h"
 #include "ifile.h"
@@ -74,6 +76,25 @@ struct kmem_cache *nilfs_btree_path_cache;
 
 static int nilfs_remount(struct super_block *sb, int *flags, char *data);
 
+static void nilfs_set_error(struct nilfs_sb_info *sbi)
+{
+	struct the_nilfs *nilfs = sbi->s_nilfs;
+	struct nilfs_super_block **sbp;
+
+	down_write(&nilfs->ns_sem);
+	if (!(nilfs->ns_mount_state & NILFS_ERROR_FS)) {
+		nilfs->ns_mount_state |= NILFS_ERROR_FS;
+		sbp = nilfs_prepare_super(sbi, 0);
+		if (likely(sbp)) {
+			sbp[0]->s_state |= cpu_to_le16(NILFS_ERROR_FS);
+			if (sbp[1])
+				sbp[1]->s_state |= cpu_to_le16(NILFS_ERROR_FS);
+			nilfs_commit_super(sbi, NILFS_SB_COMMIT_ALL);
+		}
+	}
+	up_write(&nilfs->ns_sem);
+}
+
 /**
  * nilfs_error() - report failure condition on a filesystem
  *
@@ -99,16 +120,7 @@ void nilfs_error(struct super_block *sb, const char *function,
 	va_end(args);
 
 	if (!(sb->s_flags & MS_RDONLY)) {
-		struct the_nilfs *nilfs = sbi->s_nilfs;
-
-		down_write(&nilfs->ns_sem);
-		if (!(nilfs->ns_mount_state & NILFS_ERROR_FS)) {
-			nilfs->ns_mount_state |= NILFS_ERROR_FS;
-			nilfs->ns_sbp[0]->s_state |=
-				cpu_to_le16(NILFS_ERROR_FS);
-			nilfs_commit_super(sbi, 1);
-		}
-		up_write(&nilfs->ns_sem);
+		nilfs_set_error(sbi);
 
 		if (nilfs_test_opt(sbi, ERRORS_RO)) {
 			printk(KERN_CRIT "Remounting filesystem read-only\n");
@@ -176,7 +188,7 @@ static void nilfs_clear_inode(struct inode *inode)
 	nilfs_btnode_cache_clear(&ii->i_btnode_cache);
 }
 
-static int nilfs_sync_super(struct nilfs_sb_info *sbi, int dupsb)
+static int nilfs_sync_super(struct nilfs_sb_info *sbi, int flag)
 {
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 	int err;
@@ -202,12 +214,20 @@ static int nilfs_sync_super(struct nilfs_sb_info *sbi, int dupsb)
 		printk(KERN_ERR
 		       "NILFS: unable to write superblock (err=%d)\n", err);
 		if (err == -EIO && nilfs->ns_sbh[1]) {
+			/*
+			 * sbp[0] points to newer log than sbp[1],
+			 * so copy sbp[0] to sbp[1] to take over sbp[0].
+			 */
+			memcpy(nilfs->ns_sbp[1], nilfs->ns_sbp[0],
+			       nilfs->ns_sbsize);
 			nilfs_fall_back_super_block(nilfs);
 			goto retry;
 		}
 	} else {
 		struct nilfs_super_block *sbp = nilfs->ns_sbp[0];
 
+		nilfs->ns_sbwcount++;
+
 		/*
 		 * The latest segment becomes trailable from the position
 		 * written in superblock.
@@ -216,66 +236,122 @@ static int nilfs_sync_super(struct nilfs_sb_info *sbi, int dupsb)
 
 		/* update GC protection for recent segments */
 		if (nilfs->ns_sbh[1]) {
-			sbp = NULL;
-			if (dupsb) {
+			if (flag == NILFS_SB_COMMIT_ALL) {
 				set_buffer_dirty(nilfs->ns_sbh[1]);
-				if (!sync_dirty_buffer(nilfs->ns_sbh[1]))
-					sbp = nilfs->ns_sbp[1];
+				if (sync_dirty_buffer(nilfs->ns_sbh[1]) < 0)
+					goto out;
 			}
+			if (le64_to_cpu(nilfs->ns_sbp[1]->s_last_cno) <
+			    le64_to_cpu(nilfs->ns_sbp[0]->s_last_cno))
+				sbp = nilfs->ns_sbp[1];
 		}
-		if (sbp) {
-			spin_lock(&nilfs->ns_last_segment_lock);
-			nilfs->ns_prot_seq = le64_to_cpu(sbp->s_last_seq);
-			spin_unlock(&nilfs->ns_last_segment_lock);
-		}
-	}
 
+		spin_lock(&nilfs->ns_last_segment_lock);
+		nilfs->ns_prot_seq = le64_to_cpu(sbp->s_last_seq);
+		spin_unlock(&nilfs->ns_last_segment_lock);
+	}
+ out:
 	return err;
 }
 
-int nilfs_commit_super(struct nilfs_sb_info *sbi, int dupsb)
+void nilfs_set_log_cursor(struct nilfs_super_block *sbp,
+			  struct the_nilfs *nilfs)
+{
+	sector_t nfreeblocks;
+
+	/* nilfs->ns_sem must be locked by the caller. */
+	nilfs_count_free_blocks(nilfs, &nfreeblocks);
+	sbp->s_free_blocks_count = cpu_to_le64(nfreeblocks);
+
+	spin_lock(&nilfs->ns_last_segment_lock);
+	sbp->s_last_seq = cpu_to_le64(nilfs->ns_last_seq);
+	sbp->s_last_pseg = cpu_to_le64(nilfs->ns_last_pseg);
+	sbp->s_last_cno = cpu_to_le64(nilfs->ns_last_cno);
+	spin_unlock(&nilfs->ns_last_segment_lock);
+}
+
+struct nilfs_super_block **nilfs_prepare_super(struct nilfs_sb_info *sbi,
+					       int flip)
 {
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 	struct nilfs_super_block **sbp = nilfs->ns_sbp;
-	sector_t nfreeblocks;
-	time_t t;
-	int err;
 
-	/* nilfs->sem must be locked by the caller. */
+	/* nilfs->ns_sem must be locked by the caller. */
 	if (sbp[0]->s_magic != cpu_to_le16(NILFS_SUPER_MAGIC)) {
-		if (sbp[1] && sbp[1]->s_magic == cpu_to_le16(NILFS_SUPER_MAGIC))
-			nilfs_swap_super_block(nilfs);
-		else {
+		if (sbp[1] &&
+		    sbp[1]->s_magic == cpu_to_le16(NILFS_SUPER_MAGIC)) {
+			memcpy(sbp[0], sbp[1], nilfs->ns_sbsize);
+		} else {
 			printk(KERN_CRIT "NILFS: superblock broke on dev %s\n",
 			       sbi->s_super->s_id);
-			return -EIO;
+			return NULL;
 		}
+	} else if (sbp[1] &&
+		   sbp[1]->s_magic != cpu_to_le16(NILFS_SUPER_MAGIC)) {
+			memcpy(sbp[1], sbp[0], nilfs->ns_sbsize);
 	}
-	err = nilfs_count_free_blocks(nilfs, &nfreeblocks);
-	if (unlikely(err)) {
-		printk(KERN_ERR "NILFS: failed to count free blocks\n");
-		return err;
-	}
-	spin_lock(&nilfs->ns_last_segment_lock);
-	sbp[0]->s_last_seq = cpu_to_le64(nilfs->ns_last_seq);
-	sbp[0]->s_last_pseg = cpu_to_le64(nilfs->ns_last_pseg);
-	sbp[0]->s_last_cno = cpu_to_le64(nilfs->ns_last_cno);
-	spin_unlock(&nilfs->ns_last_segment_lock);
 
+	if (flip && sbp[1])
+		nilfs_swap_super_block(nilfs);
+
+	return sbp;
+}
+
+int nilfs_commit_super(struct nilfs_sb_info *sbi, int flag)
+{
+	struct the_nilfs *nilfs = sbi->s_nilfs;
+	struct nilfs_super_block **sbp = nilfs->ns_sbp;
+	time_t t;
+
+	/* nilfs->ns_sem must be locked by the caller. */
 	t = get_seconds();
-	nilfs->ns_sbwtime[0] = t;
-	sbp[0]->s_free_blocks_count = cpu_to_le64(nfreeblocks);
+	nilfs->ns_sbwtime = t;
 	sbp[0]->s_wtime = cpu_to_le64(t);
 	sbp[0]->s_sum = 0;
 	sbp[0]->s_sum = cpu_to_le32(crc32_le(nilfs->ns_crc_seed,
 					     (unsigned char *)sbp[0],
 					     nilfs->ns_sbsize));
-	if (dupsb && sbp[1]) {
-		memcpy(sbp[1], sbp[0], nilfs->ns_sbsize);
-		nilfs->ns_sbwtime[1] = t;
+	if (flag == NILFS_SB_COMMIT_ALL && sbp[1]) {
+		sbp[1]->s_wtime = sbp[0]->s_wtime;
+		sbp[1]->s_sum = 0;
+		sbp[1]->s_sum = cpu_to_le32(crc32_le(nilfs->ns_crc_seed,
+					    (unsigned char *)sbp[1],
+					    nilfs->ns_sbsize));
 	}
 	clear_nilfs_sb_dirty(nilfs);
-	return nilfs_sync_super(sbi, dupsb);
+	return nilfs_sync_super(sbi, flag);
+}
+
+/**
+ * nilfs_cleanup_super() - write filesystem state for cleanup
+ * @sbi: nilfs_sb_info to be unmounted or degraded to read-only
+ *
+ * This function restores state flags in the on-disk super block.
+ * This will set "clean" flag (i.e. NILFS_VALID_FS) unless the
+ * filesystem was not clean previously.
+ */
+int nilfs_cleanup_super(struct nilfs_sb_info *sbi)
+{
+	struct nilfs_super_block **sbp;
+	int flag = NILFS_SB_COMMIT;
+	int ret = -EIO;
+
+	sbp = nilfs_prepare_super(sbi, 0);
+	if (sbp) {
+		sbp[0]->s_state = cpu_to_le16(sbi->s_nilfs->ns_mount_state);
+		nilfs_set_log_cursor(sbp[0], sbi->s_nilfs);
+		if (sbp[1] && sbp[0]->s_last_cno == sbp[1]->s_last_cno) {
+			/*
+			 * make the "clean" flag also to the opposite
+			 * super block if both super blocks point to
+			 * the same checkpoint.
+			 */
+			sbp[1]->s_state = sbp[0]->s_state;
+			flag = NILFS_SB_COMMIT_ALL;
+		}
+		ret = nilfs_commit_super(sbi, flag);
+	}
+	return ret;
 }
 
 static void nilfs_put_super(struct super_block *sb)
@@ -289,8 +365,7 @@ static void nilfs_put_super(struct super_block *sb)
 
 	if (!(sb->s_flags & MS_RDONLY)) {
 		down_write(&nilfs->ns_sem);
-		nilfs->ns_sbp[0]->s_state = cpu_to_le16(nilfs->ns_mount_state);
-		nilfs_commit_super(sbi, 1);
+		nilfs_cleanup_super(sbi);
 		up_write(&nilfs->ns_sem);
 	}
 	down_write(&nilfs->ns_super_sem);
@@ -311,6 +386,7 @@ static int nilfs_sync_fs(struct super_block *sb, int wait)
 {
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	struct the_nilfs *nilfs = sbi->s_nilfs;
+	struct nilfs_super_block **sbp;
 	int err = 0;
 
 	/* This function is called when super block should be written back */
@@ -318,8 +394,13 @@ static int nilfs_sync_fs(struct super_block *sb, int wait)
 		err = nilfs_construct_segment(sb);
 
 	down_write(&nilfs->ns_sem);
-	if (nilfs_sb_dirty(nilfs))
-		nilfs_commit_super(sbi, 1);
+	if (nilfs_sb_dirty(nilfs)) {
+		sbp = nilfs_prepare_super(sbi, nilfs_sb_will_flip(nilfs));
+		if (likely(sbp)) {
+			nilfs_set_log_cursor(sbp[0], nilfs);
+			nilfs_commit_super(sbi, NILFS_SB_COMMIT);
+		}
+	}
 	up_write(&nilfs->ns_sem);
 
 	return err;
@@ -442,20 +523,20 @@ static int nilfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 
 	if (!nilfs_test_opt(sbi, BARRIER))
-		seq_printf(seq, ",nobarrier");
+		seq_puts(seq, ",nobarrier");
 	if (nilfs_test_opt(sbi, SNAPSHOT))
 		seq_printf(seq, ",cp=%llu",
 			   (unsigned long long int)sbi->s_snapshot_cno);
 	if (nilfs_test_opt(sbi, ERRORS_PANIC))
-		seq_printf(seq, ",errors=panic");
+		seq_puts(seq, ",errors=panic");
 	if (nilfs_test_opt(sbi, ERRORS_CONT))
-		seq_printf(seq, ",errors=continue");
+		seq_puts(seq, ",errors=continue");
 	if (nilfs_test_opt(sbi, STRICT_ORDER))
-		seq_printf(seq, ",order=strict");
+		seq_puts(seq, ",order=strict");
 	if (nilfs_test_opt(sbi, NORECOVERY))
-		seq_printf(seq, ",norecovery");
+		seq_puts(seq, ",norecovery");
 	if (nilfs_test_opt(sbi, DISCARD))
-		seq_printf(seq, ",discard");
+		seq_puts(seq, ",discard");
 
 	return 0;
 }
@@ -524,23 +605,25 @@ static const struct export_operations nilfs_export_ops = {
 
 enum {
 	Opt_err_cont, Opt_err_panic, Opt_err_ro,
-	Opt_nobarrier, Opt_snapshot, Opt_order, Opt_norecovery,
-	Opt_discard, Opt_err,
+	Opt_barrier, Opt_nobarrier, Opt_snapshot, Opt_order, Opt_norecovery,
+	Opt_discard, Opt_nodiscard, Opt_err,
 };
 
 static match_table_t tokens = {
 	{Opt_err_cont, "errors=continue"},
 	{Opt_err_panic, "errors=panic"},
 	{Opt_err_ro, "errors=remount-ro"},
+	{Opt_barrier, "barrier"},
 	{Opt_nobarrier, "nobarrier"},
 	{Opt_snapshot, "cp=%u"},
 	{Opt_order, "order=%s"},
 	{Opt_norecovery, "norecovery"},
 	{Opt_discard, "discard"},
+	{Opt_nodiscard, "nodiscard"},
 	{Opt_err, NULL}
 };
 
-static int parse_options(char *options, struct super_block *sb)
+static int parse_options(char *options, struct super_block *sb, int is_remount)
 {
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
 	char *p;
@@ -557,6 +640,9 @@ static int parse_options(char *options, struct super_block *sb)
 
 		token = match_token(p, tokens, args);
 		switch (token) {
+		case Opt_barrier:
+			nilfs_set_opt(sbi, BARRIER);
+			break;
 		case Opt_nobarrier:
 			nilfs_clear_opt(sbi, BARRIER);
 			break;
@@ -582,8 +668,26 @@ static int parse_options(char *options, struct super_block *sb)
 		case Opt_snapshot:
 			if (match_int(&args[0], &option) || option <= 0)
 				return 0;
-			if (!(sb->s_flags & MS_RDONLY))
+			if (is_remount) {
+				if (!nilfs_test_opt(sbi, SNAPSHOT)) {
+					printk(KERN_ERR
+					       "NILFS: cannot change regular "
+					       "mount to snapshot.\n");
+					return 0;
+				} else if (option != sbi->s_snapshot_cno) {
+					printk(KERN_ERR
+					       "NILFS: cannot remount to a "
+					       "different snapshot.\n");
+					return 0;
+				}
+				break;
+			}
+			if (!(sb->s_flags & MS_RDONLY)) {
+				printk(KERN_ERR "NILFS: cannot mount snapshot "
+				       "read/write.  A read-only option is "
+				       "required.\n");
 				return 0;
+			}
 			sbi->s_snapshot_cno = option;
 			nilfs_set_opt(sbi, SNAPSHOT);
 			break;
@@ -593,6 +697,9 @@ static int parse_options(char *options, struct super_block *sb)
 		case Opt_discard:
 			nilfs_set_opt(sbi, DISCARD);
 			break;
+		case Opt_nodiscard:
+			nilfs_clear_opt(sbi, DISCARD);
+			break;
 		default:
 			printk(KERN_ERR
 			       "NILFS: Unrecognized mount option \"%s\"\n", p);
@@ -613,11 +720,18 @@ nilfs_set_default_options(struct nilfs_sb_info *sbi,
 static int nilfs_setup_super(struct nilfs_sb_info *sbi)
 {
 	struct the_nilfs *nilfs = sbi->s_nilfs;
-	struct nilfs_super_block *sbp = nilfs->ns_sbp[0];
-	int max_mnt_count = le16_to_cpu(sbp->s_max_mnt_count);
-	int mnt_count = le16_to_cpu(sbp->s_mnt_count);
+	struct nilfs_super_block **sbp;
+	int max_mnt_count;
+	int mnt_count;
+
+	/* nilfs->ns_sem must be locked by the caller. */
+	sbp = nilfs_prepare_super(sbi, 0);
+	if (!sbp)
+		return -EIO;
+
+	max_mnt_count = le16_to_cpu(sbp[0]->s_max_mnt_count);
+	mnt_count = le16_to_cpu(sbp[0]->s_mnt_count);
 
-	/* nilfs->sem must be locked by the caller. */
 	if (nilfs->ns_mount_state & NILFS_ERROR_FS) {
 		printk(KERN_WARNING
 		       "NILFS warning: mounting fs with errors\n");
@@ -628,12 +742,15 @@ static int nilfs_setup_super(struct nilfs_sb_info *sbi)
 #endif
 	}
 	if (!max_mnt_count)
-		sbp->s_max_mnt_count = cpu_to_le16(NILFS_DFL_MAX_MNT_COUNT);
-
-	sbp->s_mnt_count = cpu_to_le16(mnt_count + 1);
-	sbp->s_state = cpu_to_le16(le16_to_cpu(sbp->s_state) & ~NILFS_VALID_FS);
-	sbp->s_mtime = cpu_to_le64(get_seconds());
-	return nilfs_commit_super(sbi, 1);
+		sbp[0]->s_max_mnt_count = cpu_to_le16(NILFS_DFL_MAX_MNT_COUNT);
+
+	sbp[0]->s_mnt_count = cpu_to_le16(mnt_count + 1);
+	sbp[0]->s_state =
+		cpu_to_le16(le16_to_cpu(sbp[0]->s_state) & ~NILFS_VALID_FS);
+	sbp[0]->s_mtime = cpu_to_le64(get_seconds());
+	/* synchronize sbp[1] with sbp[0] */
+	memcpy(sbp[1], sbp[0], nilfs->ns_sbsize);
+	return nilfs_commit_super(sbi, NILFS_SB_COMMIT_ALL);
 }
 
 struct nilfs_super_block *nilfs_read_super_block(struct super_block *sb,
@@ -670,7 +787,31 @@ int nilfs_store_magic_and_option(struct super_block *sb,
 	sbi->s_interval = le32_to_cpu(sbp->s_c_interval);
 	sbi->s_watermark = le32_to_cpu(sbp->s_c_block_max);
 
-	return !parse_options(data, sb) ? -EINVAL : 0 ;
+	return !parse_options(data, sb, 0) ? -EINVAL : 0 ;
+}
+
+int nilfs_check_feature_compatibility(struct super_block *sb,
+				      struct nilfs_super_block *sbp)
+{
+	__u64 features;
+
+	features = le64_to_cpu(sbp->s_feature_incompat) &
+		~NILFS_FEATURE_INCOMPAT_SUPP;
+	if (features) {
+		printk(KERN_ERR "NILFS: couldn't mount because of unsupported "
+		       "optional features (%llx)\n",
+		       (unsigned long long)features);
+		return -EINVAL;
+	}
+	features = le64_to_cpu(sbp->s_feature_compat_ro) &
+		~NILFS_FEATURE_COMPAT_RO_SUPP;
+	if (!(sb->s_flags & MS_RDONLY) && features) {
+		printk(KERN_ERR "NILFS: couldn't mount RDWR because of "
+		       "unsupported optional features (%llx)\n",
+		       (unsigned long long)features);
+		return -EINVAL;
+	}
+	return 0;
 }
 
 /**
@@ -819,7 +960,6 @@ nilfs_fill_super(struct super_block *sb, void *data, int silent,
 static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 {
 	struct nilfs_sb_info *sbi = NILFS_SB(sb);
-	struct nilfs_super_block *sbp;
 	struct the_nilfs *nilfs = sbi->s_nilfs;
 	unsigned long old_sb_flags;
 	struct nilfs_mount_options old_opts;
@@ -833,32 +973,17 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 	old_opts.snapshot_cno = sbi->s_snapshot_cno;
 	was_snapshot = nilfs_test_opt(sbi, SNAPSHOT);
 
-	if (!parse_options(data, sb)) {
+	if (!parse_options(data, sb, 1)) {
 		err = -EINVAL;
 		goto restore_opts;
 	}
 	sb->s_flags = (sb->s_flags & ~MS_POSIXACL);
 
 	err = -EINVAL;
-	if (was_snapshot) {
-		if (!(*flags & MS_RDONLY)) {
-			printk(KERN_ERR "NILFS (device %s): cannot remount "
-			       "snapshot read/write.\n",
-			       sb->s_id);
-			goto restore_opts;
-		} else if (sbi->s_snapshot_cno != old_opts.snapshot_cno) {
-			printk(KERN_ERR "NILFS (device %s): cannot "
-			       "remount to a different snapshot.\n",
-			       sb->s_id);
-			goto restore_opts;
-		}
-	} else {
-		if (nilfs_test_opt(sbi, SNAPSHOT)) {
-			printk(KERN_ERR "NILFS (device %s): cannot change "
-			       "a regular mount to a snapshot.\n",
-			       sb->s_id);
-			goto restore_opts;
-		}
+	if (was_snapshot && !(*flags & MS_RDONLY)) {
+		printk(KERN_ERR "NILFS (device %s): cannot remount snapshot "
+		       "read/write.\n", sb->s_id);
+		goto restore_opts;
 	}
 
 	if (!nilfs_valid_fs(nilfs)) {
@@ -880,19 +1005,29 @@ static int nilfs_remount(struct super_block *sb, int *flags, char *data)
 		 * the RDONLY flag and then mark the partition as valid again.
 		 */
 		down_write(&nilfs->ns_sem);
-		sbp = nilfs->ns_sbp[0];
-		if (!(sbp->s_state & le16_to_cpu(NILFS_VALID_FS)) &&
-		    (nilfs->ns_mount_state & NILFS_VALID_FS))
-			sbp->s_state = cpu_to_le16(nilfs->ns_mount_state);
-		sbp->s_mtime = cpu_to_le64(get_seconds());
-		nilfs_commit_super(sbi, 1);
+		nilfs_cleanup_super(sbi);
 		up_write(&nilfs->ns_sem);
 	} else {
+		__u64 features;
+
 		/*
 		 * Mounting a RDONLY partition read-write, so reread and
 		 * store the current valid flag.  (It may have been changed
 		 * by fsck since we originally mounted the partition.)
 		 */
+		down_read(&nilfs->ns_sem);
+		features = le64_to_cpu(nilfs->ns_sbp[0]->s_feature_compat_ro) &
+			~NILFS_FEATURE_COMPAT_RO_SUPP;
+		up_read(&nilfs->ns_sem);
+		if (features) {
+			printk(KERN_WARNING "NILFS (device %s): couldn't "
+			       "remount RDWR because of unsupported optional "
+			       "features (%llx)\n",
+			       sb->s_id, (unsigned long long)features);
+			err = -EROFS;
+			goto restore_opts;
+		}
+
 		sb->s_flags &= ~MS_RDONLY;
 
 		err = nilfs_attach_segment_constructor(sbi);
@@ -1119,7 +1254,7 @@ static void nilfs_inode_init_once(void *obj)
 	init_rwsem(&ii->xattr_sem);
 #endif
 	nilfs_btnode_cache_init_once(&ii->i_btnode_cache);
-	ii->i_bmap = (struct nilfs_bmap *)&ii->i_bmap_union;
+	ii->i_bmap = &ii->i_bmap_data;
 	inode_init_once(&ii->vfs_inode);
 }
 
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 8c1097327ab..37de1f062d8 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -38,6 +38,8 @@
 static LIST_HEAD(nilfs_objects);
 static DEFINE_SPINLOCK(nilfs_lock);
 
+static int nilfs_valid_sb(struct nilfs_super_block *sbp);
+
 void nilfs_set_last_segment(struct the_nilfs *nilfs,
 			    sector_t start_blocknr, u64 seq, __u64 cno)
 {
@@ -45,6 +47,16 @@ void nilfs_set_last_segment(struct the_nilfs *nilfs,
 	nilfs->ns_last_pseg = start_blocknr;
 	nilfs->ns_last_seq = seq;
 	nilfs->ns_last_cno = cno;
+
+	if (!nilfs_sb_dirty(nilfs)) {
+		if (nilfs->ns_prev_seq == nilfs->ns_last_seq)
+			goto stay_cursor;
+
+		set_nilfs_sb_dirty(nilfs);
+	}
+	nilfs->ns_prev_seq = nilfs->ns_last_seq;
+
+ stay_cursor:
 	spin_unlock(&nilfs->ns_last_segment_lock);
 }
 
@@ -159,8 +171,7 @@ void put_nilfs(struct the_nilfs *nilfs)
 	kfree(nilfs);
 }
 
-static int nilfs_load_super_root(struct the_nilfs *nilfs,
-				 struct nilfs_sb_info *sbi, sector_t sr_block)
+static int nilfs_load_super_root(struct the_nilfs *nilfs, sector_t sr_block)
 {
 	struct buffer_head *bh_sr;
 	struct nilfs_super_root *raw_sr;
@@ -169,7 +180,7 @@ static int nilfs_load_super_root(struct the_nilfs *nilfs,
 	unsigned inode_size;
 	int err;
 
-	err = nilfs_read_super_root_block(sbi->s_super, sr_block, &bh_sr, 1);
+	err = nilfs_read_super_root_block(nilfs, sr_block, &bh_sr, 1);
 	if (unlikely(err))
 		return err;
 
@@ -248,6 +259,37 @@ static void nilfs_clear_recovery_info(struct nilfs_recovery_info *ri)
 }
 
 /**
+ * nilfs_store_log_cursor - load log cursor from a super block
+ * @nilfs: nilfs object
+ * @sbp: buffer storing super block to be read
+ *
+ * nilfs_store_log_cursor() reads the last position of the log
+ * containing a super root from a given super block, and initializes
+ * relevant information on the nilfs object preparatory for log
+ * scanning and recovery.
+ */
+static int nilfs_store_log_cursor(struct the_nilfs *nilfs,
+				  struct nilfs_super_block *sbp)
+{
+	int ret = 0;
+
+	nilfs->ns_last_pseg = le64_to_cpu(sbp->s_last_pseg);
+	nilfs->ns_last_cno = le64_to_cpu(sbp->s_last_cno);
+	nilfs->ns_last_seq = le64_to_cpu(sbp->s_last_seq);
+
+	nilfs->ns_prev_seq = nilfs->ns_last_seq;
+	nilfs->ns_seg_seq = nilfs->ns_last_seq;
+	nilfs->ns_segnum =
+		nilfs_get_segnum_of_block(nilfs, nilfs->ns_last_pseg);
+	nilfs->ns_cno = nilfs->ns_last_cno + 1;
+	if (nilfs->ns_segnum >= nilfs->ns_nsegments) {
+		printk(KERN_ERR "NILFS invalid last segment number.\n");
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/**
  * load_nilfs - load and recover the nilfs
  * @nilfs: the_nilfs structure to be released
  * @sbi: nilfs_sb_info used to recover past segment
@@ -285,13 +327,55 @@ int load_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 
 	nilfs_init_recovery_info(&ri);
 
-	err = nilfs_search_super_root(nilfs, sbi, &ri);
+	err = nilfs_search_super_root(nilfs, &ri);
 	if (unlikely(err)) {
-		printk(KERN_ERR "NILFS: error searching super root.\n");
-		goto failed;
+		struct nilfs_super_block **sbp = nilfs->ns_sbp;
+		int blocksize;
+
+		if (err != -EINVAL)
+			goto scan_error;
+
+		if (!nilfs_valid_sb(sbp[1])) {
+			printk(KERN_WARNING
+			       "NILFS warning: unable to fall back to spare"
+			       "super block\n");
+			goto scan_error;
+		}
+		printk(KERN_INFO
+		       "NILFS: try rollback from an earlier position\n");
+
+		/*
+		 * restore super block with its spare and reconfigure
+		 * relevant states of the nilfs object.
+		 */
+		memcpy(sbp[0], sbp[1], nilfs->ns_sbsize);
+		nilfs->ns_crc_seed = le32_to_cpu(sbp[0]->s_crc_seed);
+		nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
+
+		/* verify consistency between two super blocks */
+		blocksize = BLOCK_SIZE << le32_to_cpu(sbp[0]->s_log_block_size);
+		if (blocksize != nilfs->ns_blocksize) {
+			printk(KERN_WARNING
+			       "NILFS warning: blocksize differs between "
+			       "two super blocks (%d != %d)\n",
+			       blocksize, nilfs->ns_blocksize);
+			goto scan_error;
+		}
+
+		err = nilfs_store_log_cursor(nilfs, sbp[0]);
+		if (err)
+			goto scan_error;
+
+		/* drop clean flag to allow roll-forward and recovery */
+		nilfs->ns_mount_state &= ~NILFS_VALID_FS;
+		valid_fs = 0;
+
+		err = nilfs_search_super_root(nilfs, &ri);
+		if (err)
+			goto scan_error;
 	}
 
-	err = nilfs_load_super_root(nilfs, sbi, ri.ri_super_root);
+	err = nilfs_load_super_root(nilfs, ri.ri_super_root);
 	if (unlikely(err)) {
 		printk(KERN_ERR "NILFS: error loading super root.\n");
 		goto failed;
@@ -301,11 +385,23 @@ int load_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 		goto skip_recovery;
 
 	if (s_flags & MS_RDONLY) {
+		__u64 features;
+
 		if (nilfs_test_opt(sbi, NORECOVERY)) {
 			printk(KERN_INFO "NILFS: norecovery option specified. "
 			       "skipping roll-forward recovery\n");
 			goto skip_recovery;
 		}
+		features = le64_to_cpu(nilfs->ns_sbp[0]->s_feature_compat_ro) &
+			~NILFS_FEATURE_COMPAT_RO_SUPP;
+		if (features) {
+			printk(KERN_ERR "NILFS: couldn't proceed with "
+			       "recovery because of unsupported optional "
+			       "features (%llx)\n",
+			       (unsigned long long)features);
+			err = -EROFS;
+			goto failed_unload;
+		}
 		if (really_read_only) {
 			printk(KERN_ERR "NILFS: write access "
 			       "unavailable, cannot proceed.\n");
@@ -320,14 +416,13 @@ int load_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 		goto failed_unload;
 	}
 
-	err = nilfs_recover_logical_segments(nilfs, sbi, &ri);
+	err = nilfs_salvage_orphan_logs(nilfs, sbi, &ri);
 	if (err)
 		goto failed_unload;
 
 	down_write(&nilfs->ns_sem);
-	nilfs->ns_mount_state |= NILFS_VALID_FS;
-	nilfs->ns_sbp[0]->s_state = cpu_to_le16(nilfs->ns_mount_state);
-	err = nilfs_commit_super(sbi, 1);
+	nilfs->ns_mount_state |= NILFS_VALID_FS; /* set "clean" flag */
+	err = nilfs_cleanup_super(sbi);
 	up_write(&nilfs->ns_sem);
 
 	if (err) {
@@ -343,6 +438,10 @@ int load_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi)
 	sbi->s_super->s_flags = s_flags;
 	return 0;
 
+ scan_error:
+	printk(KERN_ERR "NILFS: error searching super root.\n");
+	goto failed;
+
  failed_unload:
 	nilfs_mdt_destroy(nilfs->ns_cpfile);
 	nilfs_mdt_destroy(nilfs->ns_sufile);
@@ -515,8 +614,8 @@ static int nilfs_load_super_block(struct the_nilfs *nilfs,
 		nilfs_swap_super_block(nilfs);
 	}
 
-	nilfs->ns_sbwtime[0] = le64_to_cpu(sbp[0]->s_wtime);
-	nilfs->ns_sbwtime[1] = valid[!swp] ? le64_to_cpu(sbp[1]->s_wtime) : 0;
+	nilfs->ns_sbwcount = 0;
+	nilfs->ns_sbwtime = le64_to_cpu(sbp[0]->s_wtime);
 	nilfs->ns_prot_seq = le64_to_cpu(sbp[valid[1] & !swp]->s_last_seq);
 	*sbpp = sbp[0];
 	return 0;
@@ -557,6 +656,10 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 		if (err)
 			goto out;
 
+		err = nilfs_check_feature_compatibility(sb, sbp);
+		if (err)
+			goto out;
+
 		blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
 		if (sb->s_blocksize != blocksize &&
 		    !sb_set_blocksize(sb, blocksize)) {
@@ -568,7 +671,7 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 		goto out;
 	}
 
-	blocksize = sb_min_blocksize(sb, BLOCK_SIZE);
+	blocksize = sb_min_blocksize(sb, NILFS_MIN_BLOCK_SIZE);
 	if (!blocksize) {
 		printk(KERN_ERR "NILFS: unable to set blocksize\n");
 		err = -EINVAL;
@@ -582,7 +685,18 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 	if (err)
 		goto failed_sbh;
 
+	err = nilfs_check_feature_compatibility(sb, sbp);
+	if (err)
+		goto failed_sbh;
+
 	blocksize = BLOCK_SIZE << le32_to_cpu(sbp->s_log_block_size);
+	if (blocksize < NILFS_MIN_BLOCK_SIZE ||
+	    blocksize > NILFS_MAX_BLOCK_SIZE) {
+		printk(KERN_ERR "NILFS: couldn't mount because of unsupported "
+		       "filesystem blocksize %d\n", blocksize);
+		err = -EINVAL;
+		goto failed_sbh;
+	}
 	if (sb->s_blocksize != blocksize) {
 		int hw_blocksize = bdev_logical_block_size(sb->s_bdev);
 
@@ -604,6 +718,7 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 			   when reloading fails. */
 	}
 	nilfs->ns_blocksize_bits = sb->s_blocksize_bits;
+	nilfs->ns_blocksize = blocksize;
 
 	err = nilfs_store_disk_layout(nilfs, sbp);
 	if (err)
@@ -616,23 +731,9 @@ int init_nilfs(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi, char *data)
 	bdi = nilfs->ns_bdev->bd_inode->i_mapping->backing_dev_info;
 	nilfs->ns_bdi = bdi ? : &default_backing_dev_info;
 
-	/* Finding last segment */
-	nilfs->ns_last_pseg = le64_to_cpu(sbp->s_last_pseg);
-	nilfs->ns_last_cno = le64_to_cpu(sbp->s_last_cno);
-	nilfs->ns_last_seq = le64_to_cpu(sbp->s_last_seq);
-
-	nilfs->ns_seg_seq = nilfs->ns_last_seq;
-	nilfs->ns_segnum =
-		nilfs_get_segnum_of_block(nilfs, nilfs->ns_last_pseg);
-	nilfs->ns_cno = nilfs->ns_last_cno + 1;
-	if (nilfs->ns_segnum >= nilfs->ns_nsegments) {
-		printk(KERN_ERR "NILFS invalid last segment number.\n");
-		err = -EINVAL;
+	err = nilfs_store_log_cursor(nilfs, sbp);
+	if (err)
 		goto failed_sbh;
-	}
-	/* Dummy values  */
-	nilfs->ns_free_segments_count =
-		nilfs->ns_nsegments - (nilfs->ns_segnum + 1);
 
 	/* Initialize gcinode cache */
 	err = nilfs_init_gccache(nilfs);
diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h
index 1ab97453369..f785a7b0ab9 100644
--- a/fs/nilfs2/the_nilfs.h
+++ b/fs/nilfs2/the_nilfs.h
@@ -57,7 +57,8 @@ enum {
  * @ns_current: back pointer to current mount
  * @ns_sbh: buffer heads of on-disk super blocks
  * @ns_sbp: pointers to super block data
- * @ns_sbwtime: previous write time of super blocks
+ * @ns_sbwtime: previous write time of super block
+ * @ns_sbwcount: write count of super block
  * @ns_sbsize: size of valid data in super block
  * @ns_supers: list of nilfs super block structs
  * @ns_seg_seq: segment sequence counter
@@ -73,7 +74,7 @@ enum {
  * @ns_last_seq: sequence value of the latest segment
  * @ns_last_cno: checkpoint number of the latest segment
  * @ns_prot_seq: least sequence number of segments which must not be reclaimed
- * @ns_free_segments_count: counter of free segments
+ * @ns_prev_seq: base sequence number used to decide if advance log cursor
  * @ns_segctor_sem: segment constructor semaphore
  * @ns_dat: DAT file inode
  * @ns_cpfile: checkpoint file inode
@@ -82,6 +83,7 @@ enum {
  * @ns_gc_inodes: dummy inodes to keep live blocks
  * @ns_gc_inodes_h: hash list to keep dummy inode holding live blocks
  * @ns_blocksize_bits: bit length of block size
+ * @ns_blocksize: block size
  * @ns_nsegments: number of segments in filesystem
  * @ns_blocks_per_segment: number of blocks per segment
  * @ns_r_segments_percentage: reserved segments percentage
@@ -119,7 +121,8 @@ struct the_nilfs {
 	 */
 	struct buffer_head     *ns_sbh[2];
 	struct nilfs_super_block *ns_sbp[2];
-	time_t			ns_sbwtime[2];
+	time_t			ns_sbwtime;
+	unsigned		ns_sbwcount;
 	unsigned		ns_sbsize;
 	unsigned		ns_mount_state;
 
@@ -149,7 +152,7 @@ struct the_nilfs {
 	u64			ns_last_seq;
 	__u64			ns_last_cno;
 	u64			ns_prot_seq;
-	unsigned long		ns_free_segments_count;
+	u64			ns_prev_seq;
 
 	struct rw_semaphore	ns_segctor_sem;
 
@@ -168,6 +171,7 @@ struct the_nilfs {
 
 	/* Disk layout information (static) */
 	unsigned int		ns_blocksize_bits;
+	unsigned int		ns_blocksize;
 	unsigned long		ns_nsegments;
 	unsigned long		ns_blocks_per_segment;
 	unsigned long		ns_r_segments_percentage;
@@ -203,20 +207,17 @@ THE_NILFS_FNS(SB_DIRTY, sb_dirty)
 
 /* Minimum interval of periodical update of superblocks (in seconds) */
 #define NILFS_SB_FREQ		10
-#define NILFS_ALTSB_FREQ	60  /* spare superblock */
 
 static inline int nilfs_sb_need_update(struct the_nilfs *nilfs)
 {
 	u64 t = get_seconds();
-	return t < nilfs->ns_sbwtime[0] ||
-		 t > nilfs->ns_sbwtime[0] + NILFS_SB_FREQ;
+	return t < nilfs->ns_sbwtime || t > nilfs->ns_sbwtime + NILFS_SB_FREQ;
 }
 
-static inline int nilfs_altsb_need_update(struct the_nilfs *nilfs)
+static inline int nilfs_sb_will_flip(struct the_nilfs *nilfs)
 {
-	u64 t = get_seconds();
-	struct nilfs_super_block **sbp = nilfs->ns_sbp;
-	return sbp[1] && t > nilfs->ns_sbwtime[1] + NILFS_ALTSB_FREQ;
+	int flip_bits = nilfs->ns_sbwcount & 0x0FL;
+	return (flip_bits != 0x08 && flip_bits != 0x0F);
 }
 
 void nilfs_set_last_segment(struct the_nilfs *, sector_t, u64, __u64);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 625de9d7088..9b57c0350ff 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -760,13 +760,13 @@ void ocfs2_set_journal_params(struct ocfs2_super *osb)
 	if (osb->osb_commit_interval)
 		commit_interval = osb->osb_commit_interval;
 
-	spin_lock(&journal->j_state_lock);
+	write_lock(&journal->j_state_lock);
 	journal->j_commit_interval = commit_interval;
 	if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER)
 		journal->j_flags |= JBD2_BARRIER;
 	else
 		journal->j_flags &= ~JBD2_BARRIER;
-	spin_unlock(&journal->j_state_lock);
+	write_unlock(&journal->j_state_lock);
 }
 
 int ocfs2_journal_init(struct ocfs2_journal *journal, int *dirty)
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 5dcd4b0c553..72c52656dc2 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -459,7 +459,6 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
 	}
 
 	/* everything is up and running, commence */
-	INIT_RCU_HEAD(&p->rcu_head);
 	rcu_assign_pointer(ptbl->part[partno], p);
 
 	/* suppress uevent if the disk supresses it */
diff --git a/fs/proc/base.c b/fs/proc/base.c
index acb7ef80ea4..69254a365ce 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -63,6 +63,7 @@
 #include <linux/namei.h>
 #include <linux/mnt_namespace.h>
 #include <linux/mm.h>
+#include <linux/swap.h>
 #include <linux/rcupdate.h>
 #include <linux/kallsyms.h>
 #include <linux/stacktrace.h>
@@ -427,17 +428,14 @@ static const struct file_operations proc_lstats_operations = {
 
 #endif
 
-/* The badness from the OOM killer */
-unsigned long badness(struct task_struct *p, unsigned long uptime);
 static int proc_oom_score(struct task_struct *task, char *buffer)
 {
 	unsigned long points = 0;
-	struct timespec uptime;
 
-	do_posix_clock_monotonic_gettime(&uptime);
 	read_lock(&tasklist_lock);
 	if (pid_alive(task))
-		points = badness(task, uptime.tv_sec);
+		points = oom_badness(task, NULL, NULL,
+					totalram_pages + total_swap_pages);
 	read_unlock(&tasklist_lock);
 	return sprintf(buffer, "%lu\n", points);
 }
@@ -1039,8 +1037,24 @@ static ssize_t oom_adjust_write(struct file *file, const char __user *buf,
 		return -EACCES;
 	}
 
+	/*
+	 * Warn that /proc/pid/oom_adj is deprecated, see
+	 * Documentation/feature-removal-schedule.txt.
+	 */
+	printk_once(KERN_WARNING "%s (%d): /proc/%d/oom_adj is deprecated, "
+			"please use /proc/%d/oom_score_adj instead.\n",
+			current->comm, task_pid_nr(current),
+			task_pid_nr(task), task_pid_nr(task));
 	task->signal->oom_adj = oom_adjust;
-
+	/*
+	 * Scale /proc/pid/oom_score_adj appropriately ensuring that a maximum
+	 * value is always attainable.
+	 */
+	if (task->signal->oom_adj == OOM_ADJUST_MAX)
+		task->signal->oom_score_adj = OOM_SCORE_ADJ_MAX;
+	else
+		task->signal->oom_score_adj = (oom_adjust * OOM_SCORE_ADJ_MAX) /
+								-OOM_DISABLE;
 	unlock_task_sighand(task, &flags);
 	put_task_struct(task);
 
@@ -1053,6 +1067,82 @@ static const struct file_operations proc_oom_adjust_operations = {
 	.llseek		= generic_file_llseek,
 };
 
+static ssize_t oom_score_adj_read(struct file *file, char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
+	char buffer[PROC_NUMBUF];
+	int oom_score_adj = OOM_SCORE_ADJ_MIN;
+	unsigned long flags;
+	size_t len;
+
+	if (!task)
+		return -ESRCH;
+	if (lock_task_sighand(task, &flags)) {
+		oom_score_adj = task->signal->oom_score_adj;
+		unlock_task_sighand(task, &flags);
+	}
+	put_task_struct(task);
+	len = snprintf(buffer, sizeof(buffer), "%d\n", oom_score_adj);
+	return simple_read_from_buffer(buf, count, ppos, buffer, len);
+}
+
+static ssize_t oom_score_adj_write(struct file *file, const char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct task_struct *task;
+	char buffer[PROC_NUMBUF];
+	unsigned long flags;
+	long oom_score_adj;
+	int err;
+
+	memset(buffer, 0, sizeof(buffer));
+	if (count > sizeof(buffer) - 1)
+		count = sizeof(buffer) - 1;
+	if (copy_from_user(buffer, buf, count))
+		return -EFAULT;
+
+	err = strict_strtol(strstrip(buffer), 0, &oom_score_adj);
+	if (err)
+		return -EINVAL;
+	if (oom_score_adj < OOM_SCORE_ADJ_MIN ||
+			oom_score_adj > OOM_SCORE_ADJ_MAX)
+		return -EINVAL;
+
+	task = get_proc_task(file->f_path.dentry->d_inode);
+	if (!task)
+		return -ESRCH;
+	if (!lock_task_sighand(task, &flags)) {
+		put_task_struct(task);
+		return -ESRCH;
+	}
+	if (oom_score_adj < task->signal->oom_score_adj &&
+			!capable(CAP_SYS_RESOURCE)) {
+		unlock_task_sighand(task, &flags);
+		put_task_struct(task);
+		return -EACCES;
+	}
+
+	task->signal->oom_score_adj = oom_score_adj;
+	/*
+	 * Scale /proc/pid/oom_adj appropriately ensuring that OOM_DISABLE is
+	 * always attainable.
+	 */
+	if (task->signal->oom_score_adj == OOM_SCORE_ADJ_MIN)
+		task->signal->oom_adj = OOM_DISABLE;
+	else
+		task->signal->oom_adj = (oom_score_adj * OOM_ADJUST_MAX) /
+							OOM_SCORE_ADJ_MAX;
+	unlock_task_sighand(task, &flags);
+	put_task_struct(task);
+	return count;
+}
+
+static const struct file_operations proc_oom_score_adj_operations = {
+	.read		= oom_score_adj_read,
+	.write		= oom_score_adj_write,
+};
+
 #ifdef CONFIG_AUDITSYSCALL
 #define TMPBUFLEN 21
 static ssize_t proc_loginuid_read(struct file * file, char __user * buf,
@@ -2625,6 +2715,7 @@ static const struct pid_entry tgid_base_stuff[] = {
 #endif
 	INF("oom_score",  S_IRUGO, proc_oom_score),
 	REG("oom_adj",    S_IRUGO|S_IWUSR, proc_oom_adjust_operations),
+	REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
 #ifdef CONFIG_AUDITSYSCALL
 	REG("loginuid",   S_IWUSR|S_IRUGO, proc_loginuid_operations),
 	REG("sessionid",  S_IRUGO, proc_sessionid_operations),
@@ -2959,6 +3050,7 @@ static const struct pid_entry tid_base_stuff[] = {
 #endif
 	INF("oom_score", S_IRUGO, proc_oom_score),
 	REG("oom_adj",   S_IRUGO|S_IWUSR, proc_oom_adjust_operations),
+	REG("oom_score_adj", S_IRUGO|S_IWUSR, proc_oom_score_adj_operations),
 #ifdef CONFIG_AUDITSYSCALL
 	REG("loginuid",  S_IWUSR|S_IRUGO, proc_loginuid_operations),
 	REG("sessionid",  S_IRUSR, proc_sessionid_operations),
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 437d2ca2de9..ef72b169942 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -132,6 +132,22 @@ static __cacheline_aligned_in_smp DEFINE_SPINLOCK(dq_state_lock);
 __cacheline_aligned_in_smp DEFINE_SPINLOCK(dq_data_lock);
 EXPORT_SYMBOL(dq_data_lock);
 
+void __quota_error(struct super_block *sb, const char *func,
+		  const char *fmt, ...)
+{
+	va_list args;
+
+	if (printk_ratelimit()) {
+		va_start(args, fmt);
+		printk(KERN_ERR "Quota error (device %s): %s: ",
+		       sb->s_id, func);
+		vprintk(fmt, args);
+		printk("\n");
+		va_end(args);
+	}
+}
+EXPORT_SYMBOL(__quota_error);
+
 #if defined(CONFIG_QUOTA_DEBUG) || defined(CONFIG_PRINT_QUOTA_WARNING)
 static char *quotatypes[] = INITQFNAMES;
 #endif
@@ -705,11 +721,8 @@ void dqput(struct dquot *dquot)
 		return;
 #ifdef CONFIG_QUOTA_DEBUG
 	if (!atomic_read(&dquot->dq_count)) {
-		printk("VFS: dqput: trying to free free dquot\n");
-		printk("VFS: device %s, dquot of %s %d\n",
-			dquot->dq_sb->s_id,
-			quotatypes[dquot->dq_type],
-			dquot->dq_id);
+		quota_error(dquot->dq_sb, "trying to free free dquot of %s %d",
+			    quotatypes[dquot->dq_type], dquot->dq_id);
 		BUG();
 	}
 #endif
@@ -732,9 +745,9 @@ we_slept:
 		/* Commit dquot before releasing */
 		ret = dquot->dq_sb->dq_op->write_dquot(dquot);
 		if (ret < 0) {
-			printk(KERN_ERR "VFS: cannot write quota structure on "
-				"device %s (error %d). Quota may get out of "
-				"sync!\n", dquot->dq_sb->s_id, ret);
+			quota_error(dquot->dq_sb, "Can't write quota structure"
+				    " (error %d). Quota may get out of sync!",
+				    ret);
 			/*
 			 * We clear dirty bit anyway, so that we avoid
 			 * infinite loop here
@@ -914,9 +927,9 @@ static void add_dquot_ref(struct super_block *sb, int type)
 
 #ifdef CONFIG_QUOTA_DEBUG
 	if (reserved) {
-		printk(KERN_WARNING "VFS (%s): Writes happened before quota"
-			" was turned on thus quota information is probably "
-			"inconsistent. Please run quotacheck(8).\n", sb->s_id);
+		quota_error(sb, "Writes happened before quota was turned on "
+			"thus quota information is probably inconsistent. "
+			"Please run quotacheck(8)");
 	}
 #endif
 }
@@ -947,7 +960,9 @@ static int remove_inode_dquot_ref(struct inode *inode, int type,
 		if (dqput_blocks(dquot)) {
 #ifdef CONFIG_QUOTA_DEBUG
 			if (atomic_read(&dquot->dq_count) != 1)
-				printk(KERN_WARNING "VFS: Adding dquot with dq_count %d to dispose list.\n", atomic_read(&dquot->dq_count));
+				quota_error(inode->i_sb, "Adding dquot with "
+					    "dq_count %d to dispose list",
+					    atomic_read(&dquot->dq_count));
 #endif
 			spin_lock(&dq_list_lock);
 			/* As dquot must have currently users it can't be on
@@ -986,6 +1001,7 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		struct list_head *tofree_head)
 {
 	struct inode *inode;
+	int reserved = 0;
 
 	spin_lock(&inode_lock);
 	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
@@ -995,10 +1011,20 @@ static void remove_dquot_ref(struct super_block *sb, int type,
 		 *  only quota pointers and these have separate locking
 		 *  (dqptr_sem).
 		 */
-		if (!IS_NOQUOTA(inode))
+		if (!IS_NOQUOTA(inode)) {
+			if (unlikely(inode_get_rsv_space(inode) > 0))
+				reserved = 1;
 			remove_inode_dquot_ref(inode, type, tofree_head);
+		}
 	}
 	spin_unlock(&inode_lock);
+#ifdef CONFIG_QUOTA_DEBUG
+	if (reserved) {
+		printk(KERN_WARNING "VFS (%s): Writes happened after quota"
+			" was disabled thus quota information is probably "
+			"inconsistent. Please run quotacheck(8).\n", sb->s_id);
+	}
+#endif
 }
 
 /* Gather all references from inodes and drop them */
@@ -1304,6 +1330,15 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space)
 	return QUOTA_NL_NOWARN;
 }
 
+static int dquot_active(const struct inode *inode)
+{
+	struct super_block *sb = inode->i_sb;
+
+	if (IS_NOQUOTA(inode))
+		return 0;
+	return sb_any_quota_loaded(sb) & ~sb_any_quota_suspended(sb);
+}
+
 /*
  * Initialize quota pointers in inode
  *
@@ -1323,7 +1358,7 @@ static void __dquot_initialize(struct inode *inode, int type)
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode))
+	if (!dquot_active(inode))
 		return;
 
 	/* First get references to structures we might need. */
@@ -1507,7 +1542,7 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags)
 	 * First test before acquiring mutex - solves deadlocks when we
 	 * re-enter the quota code and are already holding the mutex
 	 */
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode)) {
+	if (!dquot_active(inode)) {
 		inode_incr_space(inode, number, reserve);
 		goto out;
 	}
@@ -1559,7 +1594,7 @@ int dquot_alloc_inode(const struct inode *inode)
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode))
+	if (!dquot_active(inode))
 		return 0;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
 		warntype[cnt] = QUOTA_NL_NOWARN;
@@ -1596,7 +1631,7 @@ int dquot_claim_space_nodirty(struct inode *inode, qsize_t number)
 {
 	int cnt;
 
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode)) {
+	if (!dquot_active(inode)) {
 		inode_claim_rsv_space(inode, number);
 		return 0;
 	}
@@ -1629,7 +1664,7 @@ void __dquot_free_space(struct inode *inode, qsize_t number, int flags)
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode)) {
+	if (!dquot_active(inode)) {
 		inode_decr_space(inode, number, reserve);
 		return;
 	}
@@ -1667,7 +1702,7 @@ void dquot_free_inode(const struct inode *inode)
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
-	if (!sb_any_quota_active(inode->i_sb) || IS_NOQUOTA(inode))
+	if (!dquot_active(inode))
 		return;
 
 	down_read(&sb_dqopt(inode->i_sb)->dqptr_sem);
@@ -1790,7 +1825,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr)
 	struct super_block *sb = inode->i_sb;
 	int ret;
 
-	if (!sb_any_quota_active(sb) || IS_NOQUOTA(inode))
+	if (!dquot_active(inode))
 		return 0;
 
 	if (iattr->ia_valid & ATTR_UID && iattr->ia_uid != inode->i_uid)
@@ -1957,7 +1992,7 @@ int dquot_disable(struct super_block *sb, int type, unsigned int flags)
 				truncate_inode_pages(&toputinode[cnt]->i_data,
 						     0);
 				mutex_unlock(&toputinode[cnt]->i_mutex);
-				mark_inode_dirty(toputinode[cnt]);
+				mark_inode_dirty_sync(toputinode[cnt]);
 			}
 			mutex_unlock(&dqopt->dqonoff_mutex);
 		}
@@ -2270,7 +2305,7 @@ static void do_get_dqblk(struct dquot *dquot, struct fs_disk_quota *di)
 	memset(di, 0, sizeof(*di));
 	di->d_version = FS_DQUOT_VERSION;
 	di->d_flags = dquot->dq_type == USRQUOTA ?
-			XFS_USER_QUOTA : XFS_GROUP_QUOTA;
+			FS_USER_QUOTA : FS_GROUP_QUOTA;
 	di->d_id = dquot->dq_id;
 
 	spin_lock(&dq_data_lock);
diff --git a/fs/quota/quota_tree.c b/fs/quota/quota_tree.c
index 24f03407eeb..9e48874eabc 100644
--- a/fs/quota/quota_tree.c
+++ b/fs/quota/quota_tree.c
@@ -65,8 +65,7 @@ static ssize_t write_blk(struct qtree_mem_dqinfo *info, uint blk, char *buf)
 	ret = sb->s_op->quota_write(sb, info->dqi_type, buf,
 	       info->dqi_usable_bs, blk << info->dqi_blocksize_bits);
 	if (ret != info->dqi_usable_bs) {
-		q_warn(KERN_WARNING "VFS: dquota write failed on "
-			"dev %s\n", sb->s_id);
+		quota_error(sb, "dquota write failed");
 		if (ret >= 0)
 			ret = -EIO;
 	}
@@ -160,9 +159,8 @@ static int remove_free_dqentry(struct qtree_mem_dqinfo *info, char *buf,
 	dh->dqdh_next_free = dh->dqdh_prev_free = cpu_to_le32(0);
 	/* No matter whether write succeeds block is out of list */
 	if (write_blk(info, blk, buf) < 0)
-		q_warn(KERN_ERR
-		       "VFS: Can't write block (%u) with free entries.\n",
-		       blk);
+		quota_error(info->dqi_sb, "Can't write block (%u) "
+			    "with free entries", blk);
 	return 0;
 out_buf:
 	kfree(tmpbuf);
@@ -252,9 +250,8 @@ static uint find_free_dqentry(struct qtree_mem_dqinfo *info,
 	if (le16_to_cpu(dh->dqdh_entries) + 1 >= qtree_dqstr_in_blk(info)) {
 		*err = remove_free_dqentry(info, buf, blk);
 		if (*err < 0) {
-			q_warn(KERN_ERR "VFS: find_free_dqentry(): Can't "
-			       "remove block (%u) from entry free list.\n",
-			       blk);
+			quota_error(dquot->dq_sb, "Can't remove block (%u) "
+				    "from entry free list", blk);
 			goto out_buf;
 		}
 	}
@@ -268,16 +265,15 @@ static uint find_free_dqentry(struct qtree_mem_dqinfo *info,
 	}
 #ifdef __QUOTA_QT_PARANOIA
 	if (i == qtree_dqstr_in_blk(info)) {
-		printk(KERN_ERR "VFS: find_free_dqentry(): Data block full "
-				"but it shouldn't.\n");
+		quota_error(dquot->dq_sb, "Data block full but it shouldn't");
 		*err = -EIO;
 		goto out_buf;
 	}
 #endif
 	*err = write_blk(info, blk, buf);
 	if (*err < 0) {
-		q_warn(KERN_ERR "VFS: find_free_dqentry(): Can't write quota "
-				"data block %u.\n", blk);
+		quota_error(dquot->dq_sb, "Can't write quota data block %u",
+			    blk);
 		goto out_buf;
 	}
 	dquot->dq_off = (blk << info->dqi_blocksize_bits) +
@@ -311,8 +307,8 @@ static int do_insert_tree(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 	} else {
 		ret = read_blk(info, *treeblk, buf);
 		if (ret < 0) {
-			q_warn(KERN_ERR "VFS: Can't read tree quota block "
-					"%u.\n", *treeblk);
+			quota_error(dquot->dq_sb, "Can't read tree quota "
+				    "block %u", *treeblk);
 			goto out_buf;
 		}
 	}
@@ -323,9 +319,9 @@ static int do_insert_tree(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 	if (depth == info->dqi_qtree_depth - 1) {
 #ifdef __QUOTA_QT_PARANOIA
 		if (newblk) {
-			printk(KERN_ERR "VFS: Inserting already present quota "
-					"entry (block %u).\n",
-			       le32_to_cpu(ref[get_index(info,
+			quota_error(dquot->dq_sb, "Inserting already present "
+				    "quota entry (block %u)",
+				    le32_to_cpu(ref[get_index(info,
 						dquot->dq_id, depth)]));
 			ret = -EIO;
 			goto out_buf;
@@ -373,8 +369,8 @@ int qtree_write_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot)
 	if (!dquot->dq_off) {
 		ret = dq_insert_tree(info, dquot);
 		if (ret < 0) {
-			q_warn(KERN_ERR "VFS: Error %zd occurred while "
-					"creating quota.\n", ret);
+			quota_error(sb, "Error %zd occurred while creating "
+				    "quota", ret);
 			kfree(ddquot);
 			return ret;
 		}
@@ -385,8 +381,7 @@ int qtree_write_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot)
 	ret = sb->s_op->quota_write(sb, type, ddquot, info->dqi_entry_size,
 				    dquot->dq_off);
 	if (ret != info->dqi_entry_size) {
-		q_warn(KERN_WARNING "VFS: dquota write failed on dev %s\n",
-		       sb->s_id);
+		quota_error(sb, "dquota write failed");
 		if (ret >= 0)
 			ret = -ENOSPC;
 	} else {
@@ -410,14 +405,15 @@ static int free_dqentry(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 	if (!buf)
 		return -ENOMEM;
 	if (dquot->dq_off >> info->dqi_blocksize_bits != blk) {
-		q_warn(KERN_ERR "VFS: Quota structure has offset to other "
-		  "block (%u) than it should (%u).\n", blk,
-		  (uint)(dquot->dq_off >> info->dqi_blocksize_bits));
+		quota_error(dquot->dq_sb, "Quota structure has offset to "
+			"other block (%u) than it should (%u)", blk,
+			(uint)(dquot->dq_off >> info->dqi_blocksize_bits));
 		goto out_buf;
 	}
 	ret = read_blk(info, blk, buf);
 	if (ret < 0) {
-		q_warn(KERN_ERR "VFS: Can't read quota data block %u\n", blk);
+		quota_error(dquot->dq_sb, "Can't read quota data block %u",
+			    blk);
 		goto out_buf;
 	}
 	dh = (struct qt_disk_dqdbheader *)buf;
@@ -427,8 +423,8 @@ static int free_dqentry(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 		if (ret >= 0)
 			ret = put_free_dqblk(info, buf, blk);
 		if (ret < 0) {
-			q_warn(KERN_ERR "VFS: Can't move quota data block (%u) "
-			  "to free list.\n", blk);
+			quota_error(dquot->dq_sb, "Can't move quota data block "
+				    "(%u) to free list", blk);
 			goto out_buf;
 		}
 	} else {
@@ -440,15 +436,15 @@ static int free_dqentry(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 			/* Insert will write block itself */
 			ret = insert_free_dqentry(info, buf, blk);
 			if (ret < 0) {
-				q_warn(KERN_ERR "VFS: Can't insert quota data "
-				       "block (%u) to free entry list.\n", blk);
+				quota_error(dquot->dq_sb, "Can't insert quota "
+				    "data block (%u) to free entry list", blk);
 				goto out_buf;
 			}
 		} else {
 			ret = write_blk(info, blk, buf);
 			if (ret < 0) {
-				q_warn(KERN_ERR "VFS: Can't write quota data "
-				  "block %u\n", blk);
+				quota_error(dquot->dq_sb, "Can't write quota "
+					    "data block %u", blk);
 				goto out_buf;
 			}
 		}
@@ -472,7 +468,8 @@ static int remove_tree(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 		return -ENOMEM;
 	ret = read_blk(info, *blk, buf);
 	if (ret < 0) {
-		q_warn(KERN_ERR "VFS: Can't read quota data block %u\n", *blk);
+		quota_error(dquot->dq_sb, "Can't read quota data "
+			    "block %u", blk);
 		goto out_buf;
 	}
 	newblk = le32_to_cpu(ref[get_index(info, dquot->dq_id, depth)]);
@@ -496,8 +493,8 @@ static int remove_tree(struct qtree_mem_dqinfo *info, struct dquot *dquot,
 		} else {
 			ret = write_blk(info, *blk, buf);
 			if (ret < 0)
-				q_warn(KERN_ERR "VFS: Can't write quota tree "
-				  "block %u.\n", *blk);
+				quota_error(dquot->dq_sb, "Can't write quota "
+					    "tree block %u", blk);
 		}
 	}
 out_buf:
@@ -529,7 +526,8 @@ static loff_t find_block_dqentry(struct qtree_mem_dqinfo *info,
 		return -ENOMEM;
 	ret = read_blk(info, blk, buf);
 	if (ret < 0) {
-		q_warn(KERN_ERR "VFS: Can't read quota tree block %u.\n", blk);
+		quota_error(dquot->dq_sb, "Can't read quota tree "
+			    "block %u", blk);
 		goto out_buf;
 	}
 	ddquot = buf + sizeof(struct qt_disk_dqdbheader);
@@ -539,8 +537,8 @@ static loff_t find_block_dqentry(struct qtree_mem_dqinfo *info,
 		ddquot += info->dqi_entry_size;
 	}
 	if (i == qtree_dqstr_in_blk(info)) {
-		q_warn(KERN_ERR "VFS: Quota for id %u referenced "
-		  "but not present.\n", dquot->dq_id);
+		quota_error(dquot->dq_sb, "Quota for id %u referenced "
+			    "but not present", dquot->dq_id);
 		ret = -EIO;
 		goto out_buf;
 	} else {
@@ -564,7 +562,8 @@ static loff_t find_tree_dqentry(struct qtree_mem_dqinfo *info,
 		return -ENOMEM;
 	ret = read_blk(info, blk, buf);
 	if (ret < 0) {
-		q_warn(KERN_ERR "VFS: Can't read quota tree block %u.\n", blk);
+		quota_error(dquot->dq_sb, "Can't read quota tree block %u",
+			    blk);
 		goto out_buf;
 	}
 	ret = 0;
@@ -598,7 +597,7 @@ int qtree_read_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot)
 #ifdef __QUOTA_QT_PARANOIA
 	/* Invalidated quota? */
 	if (!sb_dqopt(dquot->dq_sb)->files[type]) {
-		printk(KERN_ERR "VFS: Quota invalidated while reading!\n");
+		quota_error(sb, "Quota invalidated while reading!");
 		return -EIO;
 	}
 #endif
@@ -607,8 +606,8 @@ int qtree_read_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot)
 		offset = find_dqentry(info, dquot);
 		if (offset <= 0) {	/* Entry not present? */
 			if (offset < 0)
-				q_warn(KERN_ERR "VFS: Can't read quota "
-				  "structure for id %u.\n", dquot->dq_id);
+				quota_error(sb, "Can't read quota structure "
+					    "for id %u", dquot->dq_id);
 			dquot->dq_off = 0;
 			set_bit(DQ_FAKE_B, &dquot->dq_flags);
 			memset(&dquot->dq_dqb, 0, sizeof(struct mem_dqblk));
@@ -625,8 +624,8 @@ int qtree_read_dquot(struct qtree_mem_dqinfo *info, struct dquot *dquot)
 	if (ret != info->dqi_entry_size) {
 		if (ret >= 0)
 			ret = -EIO;
-		q_warn(KERN_ERR "VFS: Error while reading quota "
-				"structure for id %u.\n", dquot->dq_id);
+		quota_error(sb, "Error while reading quota structure for id %u",
+			    dquot->dq_id);
 		set_bit(DQ_FAKE_B, &dquot->dq_flags);
 		memset(&dquot->dq_dqb, 0, sizeof(struct mem_dqblk));
 		kfree(ddquot);
diff --git a/fs/quota/quota_tree.h b/fs/quota/quota_tree.h
index ccc3e71fb1d..a1ab8db81a5 100644
--- a/fs/quota/quota_tree.h
+++ b/fs/quota/quota_tree.h
@@ -22,10 +22,4 @@ struct qt_disk_dqdbheader {
 
 #define QT_TREEOFF	1		/* Offset of tree in file in blocks */
 
-#define q_warn(fmt, args...) \
-do { \
-	if (printk_ratelimit()) \
-		printk(fmt, ## args); \
-} while(0)
-
 #endif /* _LINUX_QUOTAIO_TREE_H */
diff --git a/fs/quota/quota_v1.c b/fs/quota/quota_v1.c
index 4af344c5852..34b37a67bb1 100644
--- a/fs/quota/quota_v1.c
+++ b/fs/quota/quota_v1.c
@@ -95,8 +95,7 @@ static int v1_commit_dqblk(struct dquot *dquot)
 			(char *)&dqblk, sizeof(struct v1_disk_dqblk),
 			v1_dqoff(dquot->dq_id));
 	if (ret != sizeof(struct v1_disk_dqblk)) {
-		printk(KERN_WARNING "VFS: dquota write failed on dev %s\n",
-			dquot->dq_sb->s_id);
+		quota_error(dquot->dq_sb, "dquota write failed");
 		if (ret >= 0)
 			ret = -EIO;
 		goto out;
diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c
index 135206af145..65444d29406 100644
--- a/fs/quota/quota_v2.c
+++ b/fs/quota/quota_v2.c
@@ -63,9 +63,8 @@ static int v2_read_header(struct super_block *sb, int type,
 	size = sb->s_op->quota_read(sb, type, (char *)dqhead,
 				    sizeof(struct v2_disk_dqheader), 0);
 	if (size != sizeof(struct v2_disk_dqheader)) {
-		q_warn(KERN_WARNING "quota_v2: Failed header read:"
-		       " expected=%zd got=%zd\n",
-			sizeof(struct v2_disk_dqheader), size);
+		quota_error(sb, "Failed header read: expected=%zd got=%zd",
+			    sizeof(struct v2_disk_dqheader), size);
 		return 0;
 	}
 	return 1;
@@ -106,8 +105,7 @@ static int v2_read_file_info(struct super_block *sb, int type)
 	size = sb->s_op->quota_read(sb, type, (char *)&dinfo,
 	       sizeof(struct v2_disk_dqinfo), V2_DQINFOOFF);
 	if (size != sizeof(struct v2_disk_dqinfo)) {
-		q_warn(KERN_WARNING "quota_v2: Can't read info structure on device %s.\n",
-			sb->s_id);
+		quota_error(sb, "Can't read info structure");
 		return -1;
 	}
 	info->dqi_priv = kmalloc(sizeof(struct qtree_mem_dqinfo), GFP_NOFS);
@@ -167,8 +165,7 @@ static int v2_write_file_info(struct super_block *sb, int type)
 	size = sb->s_op->quota_write(sb, type, (char *)&dinfo,
 	       sizeof(struct v2_disk_dqinfo), V2_DQINFOOFF);
 	if (size != sizeof(struct v2_disk_dqinfo)) {
-		q_warn(KERN_WARNING "Can't write info structure on device %s.\n",
-			sb->s_id);
+		quota_error(sb, "Can't write info structure");
 		return -1;
 	}
 	return 0;
diff --git a/fs/readdir.c b/fs/readdir.c
index 7723401f8d8..356f71528ad 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -4,6 +4,7 @@
  *  Copyright (C) 1995  Linus Torvalds
  */
 
+#include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/time.h>
@@ -54,7 +55,6 @@ EXPORT_SYMBOL(vfs_readdir);
  * anyway. Thus the special "fillonedir()" function for that
  * case (the low-level handlers don't need to care about this).
  */
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
 
 #ifdef __ARCH_WANT_OLD_READDIR
 
@@ -152,7 +152,8 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	struct linux_dirent __user * dirent;
 	struct getdents_callback * buf = (struct getdents_callback *) __buf;
 	unsigned long d_ino;
-	int reclen = ALIGN(NAME_OFFSET(dirent) + namlen + 2, sizeof(long));
+	int reclen = ALIGN(offsetof(struct linux_dirent, d_name) + namlen + 2,
+		sizeof(long));
 
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
@@ -237,7 +238,8 @@ static int filldir64(void * __buf, const char * name, int namlen, loff_t offset,
 {
 	struct linux_dirent64 __user *dirent;
 	struct getdents_callback64 * buf = (struct getdents_callback64 *) __buf;
-	int reclen = ALIGN(NAME_OFFSET(dirent) + namlen + 1, sizeof(u64));
+	int reclen = ALIGN(offsetof(struct linux_dirent64, d_name) + namlen + 1,
+		sizeof(u64));
 
 	buf->error = -EINVAL;	/* only used if we fail.. */
 	if (reclen > buf->count)
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index 1beaa739d0a..1b27b5688f6 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -593,7 +593,8 @@ EXPORT_SYMBOL_GPL(sysfs_add_file_to_group);
  * @mode: file permissions.
  *
  */
-int sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode)
+int sysfs_chmod_file(struct kobject *kobj, const struct attribute *attr,
+		     mode_t mode)
 {
 	struct sysfs_dirent *sd;
 	struct iattr newattrs;
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 94e06d6bddb..6e450e01a1b 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -36,7 +36,6 @@
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
 #include <linux/aio.h>
-#include <linux/smp_lock.h>
 
 #include "udf_i.h"
 #include "udf_sb.h"
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 612d1e2e285..12bb651e540 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1579,9 +1579,7 @@ static int udf_load_sequence(struct super_block *sb, struct buffer_head *bh,
 {
 	struct anchorVolDescPtr *anchor;
 	long main_s, main_e, reserve_s, reserve_e;
-	struct udf_sb_info *sbi;
 
-	sbi = UDF_SB(sb);
 	anchor = (struct anchorVolDescPtr *)bh->b_data;
 
 	/* Locate the main sequence */
diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c
index bfd5ac9d1f6..29b9d642e93 100644
--- a/fs/xfs/linux-2.6/xfs_quotaops.c
+++ b/fs/xfs/linux-2.6/xfs_quotaops.c
@@ -68,15 +68,15 @@ xfs_fs_set_xstate(
 	if (op != Q_XQUOTARM && !XFS_IS_QUOTA_RUNNING(mp))
 		return -ENOSYS;
 
-	if (uflags & XFS_QUOTA_UDQ_ACCT)
+	if (uflags & FS_QUOTA_UDQ_ACCT)
 		flags |= XFS_UQUOTA_ACCT;
-	if (uflags & XFS_QUOTA_PDQ_ACCT)
+	if (uflags & FS_QUOTA_PDQ_ACCT)
 		flags |= XFS_PQUOTA_ACCT;
-	if (uflags & XFS_QUOTA_GDQ_ACCT)
+	if (uflags & FS_QUOTA_GDQ_ACCT)
 		flags |= XFS_GQUOTA_ACCT;
-	if (uflags & XFS_QUOTA_UDQ_ENFD)
+	if (uflags & FS_QUOTA_UDQ_ENFD)
 		flags |= XFS_UQUOTA_ENFD;
-	if (uflags & (XFS_QUOTA_PDQ_ENFD|XFS_QUOTA_GDQ_ENFD))
+	if (uflags & (FS_QUOTA_PDQ_ENFD|FS_QUOTA_GDQ_ENFD))
 		flags |= XFS_OQUOTA_ENFD;
 
 	switch (op) {
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index d257eb8557c..45e5849df23 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -810,9 +810,9 @@ xfs_qm_export_dquot(
 	}
 
 #ifdef DEBUG
-	if (((XFS_IS_UQUOTA_ENFORCED(mp) && dst->d_flags == XFS_USER_QUOTA) ||
+	if (((XFS_IS_UQUOTA_ENFORCED(mp) && dst->d_flags == FS_USER_QUOTA) ||
 	     (XFS_IS_OQUOTA_ENFORCED(mp) &&
-			(dst->d_flags & (XFS_PROJ_QUOTA | XFS_GROUP_QUOTA)))) &&
+			(dst->d_flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)))) &&
 	    dst->d_id != 0) {
 		if (((int) dst->d_bcount >= (int) dst->d_blk_softlimit) &&
 		    (dst->d_blk_softlimit > 0)) {
@@ -833,17 +833,17 @@ xfs_qm_export_qtype_flags(
 	/*
 	 * Can't be more than one, or none.
 	 */
-	ASSERT((flags & (XFS_PROJ_QUOTA | XFS_USER_QUOTA)) !=
-		(XFS_PROJ_QUOTA | XFS_USER_QUOTA));
-	ASSERT((flags & (XFS_PROJ_QUOTA | XFS_GROUP_QUOTA)) !=
-		(XFS_PROJ_QUOTA | XFS_GROUP_QUOTA));
-	ASSERT((flags & (XFS_USER_QUOTA | XFS_GROUP_QUOTA)) !=
-		(XFS_USER_QUOTA | XFS_GROUP_QUOTA));
-	ASSERT((flags & (XFS_PROJ_QUOTA|XFS_USER_QUOTA|XFS_GROUP_QUOTA)) != 0);
+	ASSERT((flags & (FS_PROJ_QUOTA | FS_USER_QUOTA)) !=
+		(FS_PROJ_QUOTA | FS_USER_QUOTA));
+	ASSERT((flags & (FS_PROJ_QUOTA | FS_GROUP_QUOTA)) !=
+		(FS_PROJ_QUOTA | FS_GROUP_QUOTA));
+	ASSERT((flags & (FS_USER_QUOTA | FS_GROUP_QUOTA)) !=
+		(FS_USER_QUOTA | FS_GROUP_QUOTA));
+	ASSERT((flags & (FS_PROJ_QUOTA|FS_USER_QUOTA|FS_GROUP_QUOTA)) != 0);
 
 	return (flags & XFS_DQ_USER) ?
-		XFS_USER_QUOTA : (flags & XFS_DQ_PROJ) ?
-			XFS_PROJ_QUOTA : XFS_GROUP_QUOTA;
+		FS_USER_QUOTA : (flags & XFS_DQ_PROJ) ?
+			FS_PROJ_QUOTA : FS_GROUP_QUOTA;
 }
 
 STATIC uint
@@ -854,16 +854,16 @@ xfs_qm_export_flags(
 
 	uflags = 0;
 	if (flags & XFS_UQUOTA_ACCT)
-		uflags |= XFS_QUOTA_UDQ_ACCT;
+		uflags |= FS_QUOTA_UDQ_ACCT;
 	if (flags & XFS_PQUOTA_ACCT)
-		uflags |= XFS_QUOTA_PDQ_ACCT;
+		uflags |= FS_QUOTA_PDQ_ACCT;
 	if (flags & XFS_GQUOTA_ACCT)
-		uflags |= XFS_QUOTA_GDQ_ACCT;
+		uflags |= FS_QUOTA_GDQ_ACCT;
 	if (flags & XFS_UQUOTA_ENFD)
-		uflags |= XFS_QUOTA_UDQ_ENFD;
+		uflags |= FS_QUOTA_UDQ_ENFD;
 	if (flags & (XFS_OQUOTA_ENFD)) {
 		uflags |= (flags & XFS_GQUOTA_ACCT) ?
-			XFS_QUOTA_GDQ_ENFD : XFS_QUOTA_PDQ_ENFD;
+			FS_QUOTA_GDQ_ENFD : FS_QUOTA_PDQ_ENFD;
 	}
 	return (uflags);
 }
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index 5e952262d6e..bc4a6deb73b 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -71,8 +71,9 @@
 #define ACPI_TOOLS                  0x00002000
 #define ACPI_EXAMPLE                0x00004000
 #define ACPI_DRIVER                 0x00008000
+#define DT_COMPILER                 0x00010000
 
-#define ACPI_ALL_COMPONENTS         0x0000FFFF
+#define ACPI_ALL_COMPONENTS         0x0001FFFF
 #define ACPI_COMPONENT_DEFAULT      (ACPI_ALL_COMPONENTS)
 
 /* Component IDs reserved for ACPI drivers */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 1371cc99739..81d4f3d4b9f 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20100428
+#define ACPI_CA_VERSION                 0x20100702
 
 #include "actypes.h"
 #include "actbl.h"
@@ -63,7 +63,6 @@ extern u32 acpi_dbg_layer;
 extern u8 acpi_gbl_enable_interpreter_slack;
 extern u8 acpi_gbl_all_methods_serialized;
 extern u8 acpi_gbl_create_osi_method;
-extern u8 acpi_gbl_leave_wake_gpes_disabled;
 extern u8 acpi_gbl_use_default_register_widths;
 extern acpi_name acpi_gbl_trace_method_name;
 extern u32 acpi_gbl_trace_flags;
@@ -282,16 +281,16 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status);
 /*
  * GPE Interfaces
  */
-acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action);
+acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number);
 
-acpi_status
-acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type);
+acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number);
 
-acpi_status
-acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type);
+acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number);
 
 acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number);
 
+acpi_status acpi_gpe_wakeup(acpi_handle gpe_device, u32 gpe_number, u8 action);
+
 acpi_status
 acpi_get_gpe_status(acpi_handle gpe_device,
 		    u32 gpe_number, acpi_event_status *event_status);
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 95f4d0ef481..d4136b28011 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -77,8 +77,18 @@
 #define ACPI_SIG_UEFI           "UEFI"	/* Uefi Boot Optimization Table */
 #define ACPI_SIG_WAET           "WAET"	/* Windows ACPI Emulated devices Table */
 #define ACPI_SIG_WDAT           "WDAT"	/* Watchdog Action Table */
+#define ACPI_SIG_WDDT           "WDDT"	/* Watchdog Timer Description Table */
 #define ACPI_SIG_WDRT           "WDRT"	/* Watchdog Resource Table */
 
+#ifdef ACPI_UNDEFINED_TABLES
+/*
+ * These tables have been seen in the field, but no definition has been found
+ */
+#define ACPI_SIG_ATKG           "ATKG"
+#define ACPI_SIG_GSCI           "GSCI"	/* GMCH SCI table */
+#define ACPI_SIG_IEIT           "IEIT"
+#endif
+
 /*
  * All tables must be byte-packed to match the ACPI specification, since
  * the tables are provided by the system BIOS.
@@ -909,6 +919,44 @@ enum acpi_wdat_instructions {
 
 /*******************************************************************************
  *
+ * WDDT - Watchdog Descriptor Table
+ *        Version 1
+ *
+ * Conforms to "Using the Intel ICH Family Watchdog Timer (WDT)",
+ * Version 001, September 2002
+ *
+ ******************************************************************************/
+
+struct acpi_table_wddt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u16 spec_version;
+	u16 table_version;
+	u16 pci_vendor_id;
+	struct acpi_generic_address address;
+	u16 max_count;		/* Maximum counter value supported */
+	u16 min_count;		/* Minimum counter value supported */
+	u16 period;
+	u16 status;
+	u16 capability;
+};
+
+/* Flags for Status field above */
+
+#define ACPI_WDDT_AVAILABLE     (1)
+#define ACPI_WDDT_ACTIVE        (1<<1)
+#define ACPI_WDDT_TCO_OS_OWNED  (1<<2)
+#define ACPI_WDDT_USER_RESET    (1<<11)
+#define ACPI_WDDT_WDT_RESET     (1<<12)
+#define ACPI_WDDT_POWER_FAIL    (1<<13)
+#define ACPI_WDDT_UNKNOWN_RESET (1<<14)
+
+/* Flags for Capability field above */
+
+#define ACPI_WDDT_AUTO_RESET    (1)
+#define ACPI_WDDT_ALERT_SUPPORT (1<<1)
+
+/*******************************************************************************
+ *
  * WDRT - Watchdog Resource Table
  *        Version 1
  *
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index d55f4a7b824..5db8f472fec 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -663,18 +663,12 @@ typedef u32 acpi_event_status;
 #define ACPI_GPE_MAX                    0xFF
 #define ACPI_NUM_GPE                    256
 
-/* Actions for acpi_set_gpe and acpi_hw_low_set_gpe */
+/* Actions for acpi_gpe_wakeup, acpi_hw_low_set_gpe */
 
 #define ACPI_GPE_ENABLE                 0
 #define ACPI_GPE_DISABLE                1
 #define ACPI_GPE_COND_ENABLE            2
 
-/* gpe_types for acpi_enable_gpe and acpi_disable_gpe */
-
-#define ACPI_GPE_TYPE_WAKE              (u8) 0x01
-#define ACPI_GPE_TYPE_RUNTIME           (u8) 0x02
-#define ACPI_GPE_TYPE_WAKE_RUN          (u8) 0x03
-
 /*
  * GPE info flags - Per GPE
  * +-------+---+-+-+
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 058129e9b04..e53347fbf1d 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -57,11 +57,11 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	unsigned long flags;
 	int temp;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */
 	temp = v->counter;
 	temp += i;
 	v->counter = temp;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 
 	return temp;
 }
@@ -78,11 +78,11 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	unsigned long flags;
 	int temp;
 
-	local_irq_save(flags);
+	raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */
 	temp = v->counter;
 	temp -= i;
 	v->counter = temp;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 
 	return temp;
 }
@@ -135,9 +135,9 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 	unsigned long flags;
 
 	mask = ~mask;
-	local_irq_save(flags);
+	raw_local_irq_save(flags); /* Don't trace it in a irqsoff handler */
 	*addr &= mask;
-	local_irq_restore(flags);
+	raw_local_irq_restore(flags);
 }
 
 #define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 4f3d75e1ad3..c7376bf80b0 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -31,6 +31,7 @@ static inline int gpio_is_valid(int number)
 struct device;
 struct seq_file;
 struct module;
+struct device_node;
 
 /**
  * struct gpio_chip - abstract a GPIO controller
@@ -106,6 +107,17 @@ struct gpio_chip {
 	const char		*const *names;
 	unsigned		can_sleep:1;
 	unsigned		exported:1;
+
+#if defined(CONFIG_OF_GPIO)
+	/*
+	 * If CONFIG_OF is enabled, then all GPIO controllers described in the
+	 * device tree automatically may have an OF translation
+	 */
+	struct device_node *of_node;
+	int of_gpio_n_cells;
+	int (*of_xlate)(struct gpio_chip *gc, struct device_node *np,
+		        const void *gpio_spec, u32 *flags);
+#endif
 };
 
 extern const char *gpiochip_is_requested(struct gpio_chip *chip,
@@ -115,6 +127,9 @@ extern int __must_check gpiochip_reserve(int start, int ngpio);
 /* add/remove chips */
 extern int gpiochip_add(struct gpio_chip *chip);
 extern int __must_check gpiochip_remove(struct gpio_chip *chip);
+extern struct gpio_chip *gpiochip_find(void *data,
+					int (*match)(struct gpio_chip *chip,
+						     void *data));
 
 
 /* Always use the library code for GPIO management calls,
diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index bcee6365dca..118601fce92 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -188,11 +188,15 @@ static inline void outsl(unsigned long addr, const void *buffer, int count)
 #ifndef CONFIG_GENERIC_IOMAP
 #define ioread8(addr)		readb(addr)
 #define ioread16(addr)		readw(addr)
+#define ioread16be(addr)	be16_to_cpu(ioread16(addr))
 #define ioread32(addr)		readl(addr)
+#define ioread32be(addr)	be32_to_cpu(ioread32(addr))
 
 #define iowrite8(v, addr)	writeb((v), (addr))
 #define iowrite16(v, addr)	writew((v), (addr))
+#define iowrite16be(v, addr)	iowrite16(be16_to_cpu(v), (addr))
 #define iowrite32(v, addr)	writel((v), (addr))
+#define iowrite32be(v, addr)	iowrite32(be32_to_cpu(v), (addr))
 
 #define ioread8_rep(p, dst, count) \
 	insb((unsigned long) (p), (dst), (count))
diff --git a/include/asm-generic/local64.h b/include/asm-generic/local64.h
new file mode 100644
index 00000000000..02ac760c1a8
--- /dev/null
+++ b/include/asm-generic/local64.h
@@ -0,0 +1,96 @@
+#ifndef _ASM_GENERIC_LOCAL64_H
+#define _ASM_GENERIC_LOCAL64_H
+
+#include <linux/percpu.h>
+#include <asm/types.h>
+
+/*
+ * A signed long type for operations which are atomic for a single CPU.
+ * Usually used in combination with per-cpu variables.
+ *
+ * This is the default implementation, which uses atomic64_t.  Which is
+ * rather pointless.  The whole point behind local64_t is that some processors
+ * can perform atomic adds and subtracts in a manner which is atomic wrt IRQs
+ * running on this CPU.  local64_t allows exploitation of such capabilities.
+ */
+
+/* Implement in terms of atomics. */
+
+#if BITS_PER_LONG == 64
+
+#include <asm/local.h>
+
+typedef struct {
+	local_t a;
+} local64_t;
+
+#define LOCAL64_INIT(i)	{ LOCAL_INIT(i) }
+
+#define local64_read(l)		local_read(&(l)->a)
+#define local64_set(l,i)	local_set((&(l)->a),(i))
+#define local64_inc(l)		local_inc(&(l)->a)
+#define local64_dec(l)		local_dec(&(l)->a)
+#define local64_add(i,l)	local_add((i),(&(l)->a))
+#define local64_sub(i,l)	local_sub((i),(&(l)->a))
+
+#define local64_sub_and_test(i, l) local_sub_and_test((i), (&(l)->a))
+#define local64_dec_and_test(l) local_dec_and_test(&(l)->a)
+#define local64_inc_and_test(l) local_inc_and_test(&(l)->a)
+#define local64_add_negative(i, l) local_add_negative((i), (&(l)->a))
+#define local64_add_return(i, l) local_add_return((i), (&(l)->a))
+#define local64_sub_return(i, l) local_sub_return((i), (&(l)->a))
+#define local64_inc_return(l)	local_inc_return(&(l)->a)
+
+#define local64_cmpxchg(l, o, n) local_cmpxchg((&(l)->a), (o), (n))
+#define local64_xchg(l, n)	local_xchg((&(l)->a), (n))
+#define local64_add_unless(l, _a, u) local_add_unless((&(l)->a), (_a), (u))
+#define local64_inc_not_zero(l)	local_inc_not_zero(&(l)->a)
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local64_inc(l)	local64_set((l), local64_read(l) + 1)
+#define __local64_dec(l)	local64_set((l), local64_read(l) - 1)
+#define __local64_add(i,l)	local64_set((l), local64_read(l) + (i))
+#define __local64_sub(i,l)	local64_set((l), local64_read(l) - (i))
+
+#else /* BITS_PER_LONG != 64 */
+
+#include <asm/atomic.h>
+
+/* Don't use typedef: don't want them to be mixed with atomic_t's. */
+typedef struct {
+	atomic64_t a;
+} local64_t;
+
+#define LOCAL64_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local64_read(l)		atomic64_read(&(l)->a)
+#define local64_set(l,i)	atomic64_set((&(l)->a),(i))
+#define local64_inc(l)		atomic64_inc(&(l)->a)
+#define local64_dec(l)		atomic64_dec(&(l)->a)
+#define local64_add(i,l)	atomic64_add((i),(&(l)->a))
+#define local64_sub(i,l)	atomic64_sub((i),(&(l)->a))
+
+#define local64_sub_and_test(i, l) atomic64_sub_and_test((i), (&(l)->a))
+#define local64_dec_and_test(l) atomic64_dec_and_test(&(l)->a)
+#define local64_inc_and_test(l) atomic64_inc_and_test(&(l)->a)
+#define local64_add_negative(i, l) atomic64_add_negative((i), (&(l)->a))
+#define local64_add_return(i, l) atomic64_add_return((i), (&(l)->a))
+#define local64_sub_return(i, l) atomic64_sub_return((i), (&(l)->a))
+#define local64_inc_return(l)	atomic64_inc_return(&(l)->a)
+
+#define local64_cmpxchg(l, o, n) atomic64_cmpxchg((&(l)->a), (o), (n))
+#define local64_xchg(l, n)	atomic64_xchg((&(l)->a), (n))
+#define local64_add_unless(l, _a, u) atomic64_add_unless((&(l)->a), (_a), (u))
+#define local64_inc_not_zero(l)	atomic64_inc_not_zero(&(l)->a)
+
+/* Non-atomic variants, ie. preemption disabled and won't be touched
+ * in interrupt, etc.  Some archs can optimize this case well. */
+#define __local64_inc(l)	local64_set((l), local64_read(l) + 1)
+#define __local64_dec(l)	local64_set((l), local64_read(l) - 1)
+#define __local64_add(i,l)	local64_set((l), local64_read(l) + (i))
+#define __local64_sub(i,l)	local64_set((l), local64_read(l) - (i))
+
+#endif /* BITS_PER_LONG != 64 */
+
+#endif /* _ASM_GENERIC_LOCAL64_H */
diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h
index fd60700503c..fc824e2828f 100644
--- a/include/asm-generic/topology.h
+++ b/include/asm-generic/topology.h
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2002, IBM Corp.
  *
- * All rights reserved.          
+ * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,9 +34,16 @@
 #ifndef cpu_to_node
 #define cpu_to_node(cpu)	((void)(cpu),0)
 #endif
+#ifndef set_numa_node
+#define set_numa_node(node)
+#endif
+#ifndef set_cpu_numa_node
+#define set_cpu_numa_node(cpu, node)
+#endif
 #ifndef cpu_to_mem
 #define cpu_to_mem(cpu)		((void)(cpu),0)
 #endif
+
 #ifndef parent_node
 #define parent_node(node)	((void)(node),0)
 #endif
@@ -55,4 +62,15 @@
 
 #endif	/* CONFIG_NUMA */
 
+#if !defined(CONFIG_NUMA) || !defined(CONFIG_HAVE_MEMORYLESS_NODES)
+
+#ifndef set_numa_mem
+#define set_numa_mem(node)
+#endif
+#ifndef set_cpu_numa_mem
+#define set_cpu_numa_mem(cpu, node)
+#endif
+
+#endif	/* !CONFIG_NUMA || !CONFIG_HAVE_MEMORYLESS_NODES */
+
 #endif /* _ASM_GENERIC_TOPOLOGY_H */
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index 6a0b30f78a6..c17cebc4995 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -18,7 +18,7 @@
 #define __SYSCALL(x, y)
 #endif
 
-#if __BITS_PER_LONG == 32
+#if __BITS_PER_LONG == 32 || defined(__SYSCALL_COMPAT)
 #define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _32)
 #else
 #define __SC_3264(_nr, _32, _64) __SYSCALL(_nr, _64)
@@ -241,8 +241,13 @@ __SYSCALL(__NR_sync, sys_sync)
 __SYSCALL(__NR_fsync, sys_fsync)
 #define __NR_fdatasync 83
 __SYSCALL(__NR_fdatasync, sys_fdatasync)
+#ifdef __ARCH_WANT_SYNC_FILE_RANGE2
+#define __NR_sync_file_range2 84
+__SYSCALL(__NR_sync_file_range2, sys_sync_file_range2)
+#else
 #define __NR_sync_file_range 84
-__SYSCALL(__NR_sync_file_range, sys_sync_file_range) /* .long sys_sync_file_range2, */
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
+#endif
 
 /* fs/timerfd.c */
 #define __NR_timerfd_create 85
@@ -580,7 +585,7 @@ __SYSCALL(__NR_execve, sys_execve)	/* .long sys_execve_wrapper */
 __SC_3264(__NR3264_mmap, sys_mmap2, sys_mmap)
 /* mm/fadvise.c */
 #define __NR3264_fadvise64 223
-__SC_3264(__NR3264_fadvise64, sys_fadvise64_64, sys_fadvise64)
+__SYSCALL(__NR3264_fadvise64, sys_fadvise64_64)
 
 /* mm/, CONFIG_MMU only */
 #ifndef __ARCH_NOMMU
@@ -627,8 +632,17 @@ __SYSCALL(__NR_accept4, sys_accept4)
 #define __NR_recvmmsg 243
 __SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 
+/*
+ * Architectures may provide up to 16 syscalls of their own
+ * starting with this value.
+ */
+#define __NR_arch_specific_syscall 244
+
+#define __NR_wait4 260
+__SYSCALL(__NR_wait4, sys_wait4)
+
 #undef __NR_syscalls
-#define __NR_syscalls 244
+#define __NR_syscalls 261
 
 /*
  * All syscalls below here should go away really,
@@ -694,7 +708,8 @@ __SYSCALL(__NR_signalfd, sys_signalfd)
 #define __NR_syscalls (__NR_signalfd+1)
 #endif /* __ARCH_WANT_SYSCALL_NO_FLAGS */
 
-#if __BITS_PER_LONG == 32 && defined(__ARCH_WANT_SYSCALL_OFF_T)
+#if (__BITS_PER_LONG == 32 || defined(__SYSCALL_COMPAT)) && \
+     defined(__ARCH_WANT_SYSCALL_OFF_T)
 #define __NR_sendfile 1046
 __SYSCALL(__NR_sendfile, sys_sendfile)
 #define __NR_ftruncate 1047
@@ -740,6 +755,7 @@ __SYSCALL(__NR_getpgrp, sys_getpgrp)
 __SYSCALL(__NR_pause, sys_pause)
 #define __NR_time 1062
 #define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
 __SYSCALL(__NR_time, sys_time)
 #define __NR_utime 1063
 #define __ARCH_WANT_SYS_UTIME
@@ -763,8 +779,8 @@ __SYSCALL(__NR_epoll_wait, sys_epoll_wait)
 __SYSCALL(__NR_ustat, sys_ustat)
 #define __NR_vfork 1071
 __SYSCALL(__NR_vfork, sys_vfork)
-#define __NR_wait4 1072
-__SYSCALL(__NR_wait4, sys_wait4)
+#define __NR_oldwait4 1072
+__SYSCALL(__NR_oldwait4, sys_wait4)
 #define __NR_recv 1073
 __SYSCALL(__NR_recv, sys_recv)
 #define __NR_send 1074
@@ -801,7 +817,7 @@ __SYSCALL(__NR_fork, sys_ni_syscall)
  * Here we map the numbers so that both versions
  * use the same syscall table layout.
  */
-#if __BITS_PER_LONG == 64
+#if __BITS_PER_LONG == 64 && !defined(__SYSCALL_COMPAT)
 #define __NR_fcntl __NR3264_fcntl
 #define __NR_statfs __NR3264_statfs
 #define __NR_fstatfs __NR3264_fstatfs
@@ -848,6 +864,7 @@ __SYSCALL(__NR_fork, sys_ni_syscall)
 #endif
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
 
 /*
  * "Conditional" syscalls
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 030a954ed29..8a92a170fb7 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -156,10 +156,6 @@
 	CPU_KEEP(exit.data)						\
 	MEM_KEEP(init.data)						\
 	MEM_KEEP(exit.data)						\
-	. = ALIGN(8);							\
-	VMLINUX_SYMBOL(__start___markers) = .;				\
-	*(__markers)							\
-	VMLINUX_SYMBOL(__stop___markers) = .;				\
 	. = ALIGN(32);							\
 	VMLINUX_SYMBOL(__start___tracepoints) = .;			\
 	*(__tracepoints)						\
@@ -653,6 +649,7 @@
 	EXIT_DATA							\
 	EXIT_CALL							\
 	*(.discard)							\
+	*(.discard.*)							\
 	}
 
 /**
diff --git a/include/drm/drm.h b/include/drm/drm.h
index e3f46e0cb7d..e5f70617dec 100644
--- a/include/drm/drm.h
+++ b/include/drm/drm.h
@@ -663,6 +663,8 @@ struct drm_gem_open {
 #define DRM_IOCTL_UNLOCK		DRM_IOW( 0x2b, struct drm_lock)
 #define DRM_IOCTL_FINISH		DRM_IOW( 0x2c, struct drm_lock)
 
+#define DRM_IOCTL_GEM_PRIME_OPEN        DRM_IOWR(0x2e, struct drm_gem_open)
+
 #define DRM_IOCTL_AGP_ACQUIRE		DRM_IO(  0x30)
 #define DRM_IOCTL_AGP_RELEASE		DRM_IO(  0x31)
 #define DRM_IOCTL_AGP_ENABLE		DRM_IOW( 0x32, struct drm_agp_mode)
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index c1b987158df..e2a4da7d7fa 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -9,6 +9,7 @@
 /*
  * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas.
  * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
+ * Copyright (c) 2009-2010, Code Aurora Forum.
  * All rights reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -48,9 +49,9 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/file.h>
+#include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>	/* For (un)lock_kernel */
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/cdev.h>
@@ -144,6 +145,7 @@ extern void drm_ut_debug_printk(unsigned int request_level,
 #define DRIVER_IRQ_VBL2    0x800
 #define DRIVER_GEM         0x1000
 #define DRIVER_MODESET     0x2000
+#define DRIVER_USE_PLATFORM_DEVICE  0x4000
 
 /***********************************************************************/
 /** \name Begin the DRM... */
@@ -403,6 +405,8 @@ struct drm_pending_event {
 	struct drm_event *event;
 	struct list_head link;
 	struct drm_file *file_priv;
+	pid_t pid; /* pid of requester, no guarantee it's valid by the time
+		      we deliver the event, for tracing only */
 	void (*destroy)(struct drm_pending_event *event);
 };
 
@@ -823,6 +827,7 @@ struct drm_driver {
 	int num_ioctls;
 	struct file_operations fops;
 	struct pci_driver pci_driver;
+	struct platform_device *platform_device;
 	/* List of devices hanging off this driver */
 	struct list_head device_list;
 };
@@ -1015,12 +1020,16 @@ struct drm_device {
 
 	struct drm_agp_head *agp;	/**< AGP data */
 
+	struct device *dev;             /**< Device structure */
 	struct pci_dev *pdev;		/**< PCI device structure */
 	int pci_vendor;			/**< PCI vendor id */
 	int pci_device;			/**< PCI device id */
 #ifdef __alpha__
 	struct pci_controller *hose;
 #endif
+
+	struct platform_device *platformdev; /**< Platform device struture */
+
 	struct drm_sg_mem *sg;	/**< Scatter gather memory */
 	int num_crtcs;                  /**< Number of CRTCs on this device */
 	void *dev_private;		/**< device private data */
@@ -1060,17 +1069,21 @@ struct drm_device {
 
 };
 
-static inline int drm_dev_to_irq(struct drm_device *dev)
-{
-	return dev->pdev->irq;
-}
-
 static __inline__ int drm_core_check_feature(struct drm_device *dev,
 					     int feature)
 {
 	return ((dev->driver->driver_features & feature) ? 1 : 0);
 }
 
+
+static inline int drm_dev_to_irq(struct drm_device *dev)
+{
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+		return platform_get_irq(dev->platformdev, 0);
+	else
+		return dev->pdev->irq;
+}
+
 #ifdef __alpha__
 #define drm_get_pci_domain(dev) dev->hose->index
 #else
@@ -1138,6 +1151,7 @@ extern long drm_compat_ioctl(struct file *filp,
 extern int drm_lastclose(struct drm_device *dev);
 
 				/* Device support (drm_fops.h) */
+extern struct mutex drm_global_mutex;
 extern int drm_open(struct inode *inode, struct file *filp);
 extern int drm_stub_open(struct inode *inode, struct file *filp);
 extern int drm_fasync(int fd, struct file *filp, int on);
@@ -1273,10 +1287,6 @@ extern int drm_freebufs(struct drm_device *dev, void *data,
 extern int drm_mapbufs(struct drm_device *dev, void *data,
 		       struct drm_file *file_priv);
 extern int drm_order(unsigned long size);
-extern resource_size_t drm_get_resource_start(struct drm_device *dev,
-					      unsigned int resource);
-extern resource_size_t drm_get_resource_len(struct drm_device *dev,
-					    unsigned int resource);
 
 				/* DMA support (drm_dma.h) */
 extern int drm_dma_setup(struct drm_device *dev);
@@ -1351,8 +1361,11 @@ extern int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
 struct drm_master *drm_master_create(struct drm_minor *minor);
 extern struct drm_master *drm_master_get(struct drm_master *master);
 extern void drm_master_put(struct drm_master **master);
-extern int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
-		       struct drm_driver *driver);
+extern int drm_get_pci_dev(struct pci_dev *pdev,
+			   const struct pci_device_id *ent,
+			   struct drm_driver *driver);
+extern int drm_get_platform_dev(struct platform_device *pdev,
+				struct drm_driver *driver);
 extern void drm_put_dev(struct drm_device *dev);
 extern int drm_put_minor(struct drm_minor **minor);
 extern unsigned int drm_debug;
@@ -1440,6 +1453,8 @@ void drm_gem_vm_open(struct vm_area_struct *vma);
 void drm_gem_vm_close(struct vm_area_struct *vma);
 int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
 
+#include "drm_global.h"
+
 static inline void
 drm_gem_object_reference(struct drm_gem_object *obj)
 {
@@ -1529,6 +1544,9 @@ static __inline__ struct drm_local_map *drm_core_findmap(struct drm_device *dev,
 
 static __inline__ int drm_device_is_agp(struct drm_device *dev)
 {
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+		return 0;
+
 	if (dev->driver->device_is_agp != NULL) {
 		int err = (*dev->driver->device_is_agp) (dev);
 
@@ -1542,7 +1560,10 @@ static __inline__ int drm_device_is_agp(struct drm_device *dev)
 
 static __inline__ int drm_device_is_pcie(struct drm_device *dev)
 {
-	return pci_find_capability(dev->pdev, PCI_CAP_ID_EXP);
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+		return 0;
+	else
+		return pci_find_capability(dev->pdev, PCI_CAP_ID_EXP);
 }
 
 static __inline__ void drm_core_dropmap(struct drm_local_map *map)
@@ -1550,6 +1571,21 @@ static __inline__ void drm_core_dropmap(struct drm_local_map *map)
 }
 
 #include "drm_mem_util.h"
+
+static inline void *drm_get_device(struct drm_device *dev)
+{
+	if (drm_core_check_feature(dev, DRIVER_USE_PLATFORM_DEVICE))
+		return dev->platformdev;
+	else
+		return dev->pdev;
+}
+
+extern int drm_platform_init(struct drm_driver *driver);
+extern int drm_pci_init(struct drm_driver *driver);
+extern int drm_fill_in_dev(struct drm_device *dev,
+			   const struct pci_device_id *ent,
+			   struct drm_driver *driver);
+int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int type);
 /*@}*/
 
 #endif				/* __KERNEL__ */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 93a1a31b9c2..c707270bff5 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -31,7 +31,6 @@
 #include <linux/idr.h>
 
 #include <linux/fb.h>
-#include <linux/slow-work.h>
 
 struct drm_device;
 struct drm_mode_set;
@@ -595,7 +594,7 @@ struct drm_mode_config {
 
 	/* output poll support */
 	bool poll_enabled;
-	struct delayed_slow_work output_poll_slow_work;
+	struct delayed_work output_poll_work;
 
 	/* pointers to standard properties */
 	struct list_head property_blob_list;
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 1121f7799c6..59b7073b13f 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -60,9 +60,14 @@ struct drm_crtc_helper_funcs {
 	/* Move the crtc on the current fb to the given position *optional* */
 	int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
 			     struct drm_framebuffer *old_fb);
+	int (*mode_set_base_atomic)(struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb, int x, int y);
 
 	/* reload the current crtc LUT */
 	void (*load_lut)(struct drm_crtc *crtc);
+
+	/* disable crtc when not in use - more explicit than dpms off */
+	void (*disable)(struct drm_crtc *crtc);
 };
 
 struct drm_encoder_helper_funcs {
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index f0a6afc47e7..f22e7fe4b6d 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -32,6 +32,8 @@
 
 struct drm_fb_helper;
 
+#include <linux/kgdb.h>
+
 struct drm_fb_helper_crtc {
 	uint32_t crtc_id;
 	struct drm_mode_set mode_set;
@@ -78,6 +80,7 @@ struct drm_fb_helper_connector {
 
 struct drm_fb_helper {
 	struct drm_framebuffer *fb;
+	struct drm_framebuffer *saved_fb;
 	struct drm_device *dev;
 	struct drm_display_mode *mode;
 	int crtc_count;
@@ -126,5 +129,7 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
 bool drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper);
 bool drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel);
 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper);
+int drm_fb_helper_debug_enter(struct fb_info *info);
+int drm_fb_helper_debug_leave(struct fb_info *info);
 
 #endif
diff --git a/include/drm/drm_global.h b/include/drm/drm_global.h
new file mode 100644
index 00000000000..a06805eaf64
--- /dev/null
+++ b/include/drm/drm_global.h
@@ -0,0 +1,53 @@
+/**************************************************************************
+ *
+ * Copyright 2008-2009 VMware, Inc., Palo Alto, CA., USA
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ **************************************************************************/
+/*
+ * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
+ */
+
+#ifndef _DRM_GLOBAL_H_
+#define _DRM_GLOBAL_H_
+enum drm_global_types {
+	DRM_GLOBAL_TTM_MEM = 0,
+	DRM_GLOBAL_TTM_BO,
+	DRM_GLOBAL_TTM_OBJECT,
+	DRM_GLOBAL_NUM
+};
+
+struct drm_global_reference {
+	enum drm_global_types global_type;
+	size_t size;
+	void *object;
+	int (*init) (struct drm_global_reference *);
+	void (*release) (struct drm_global_reference *);
+};
+
+extern void drm_global_init(void);
+extern void drm_global_release(void);
+extern int drm_global_item_ref(struct drm_global_reference *ref);
+extern void drm_global_item_unref(struct drm_global_reference *ref);
+
+#endif
diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h
index 4c10be39a43..bf01531193d 100644
--- a/include/drm/drm_mm.h
+++ b/include/drm/drm_mm.h
@@ -42,21 +42,31 @@
 #endif
 
 struct drm_mm_node {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
-	int free;
+	struct list_head free_stack;
+	struct list_head node_list;
+	unsigned free : 1;
+	unsigned scanned_block : 1;
+	unsigned scanned_prev_free : 1;
+	unsigned scanned_next_free : 1;
 	unsigned long start;
 	unsigned long size;
 	struct drm_mm *mm;
-	void *private;
 };
 
 struct drm_mm {
-	struct list_head fl_entry;
-	struct list_head ml_entry;
+	/* List of free memory blocks, most recently freed ordered. */
+	struct list_head free_stack;
+	/* List of all memory nodes, ordered according to the (increasing) start
+	 * address of the memory node. */
+	struct list_head node_list;
 	struct list_head unused_nodes;
 	int num_unused;
 	spinlock_t unused_lock;
+	unsigned scan_alignment;
+	unsigned long scan_size;
+	unsigned long scan_hit_start;
+	unsigned scan_hit_size;
+	unsigned scanned_blocks;
 };
 
 /*
@@ -133,6 +143,11 @@ static inline struct drm_mm *drm_get_mm(struct drm_mm_node *block)
 	return block->mm;
 }
 
+void drm_mm_init_scan(struct drm_mm *mm, unsigned long size,
+		      unsigned alignment);
+int drm_mm_scan_add_block(struct drm_mm_node *node);
+int drm_mm_scan_remove_block(struct drm_mm_node *node);
+
 extern void drm_mm_debug_table(struct drm_mm *mm, const char *prefix);
 #ifdef CONFIG_DEBUG_FS
 int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm);
diff --git a/include/drm/drm_mode.h b/include/drm/drm_mode.h
index c5ba1636613..0fc7397c8f1 100644
--- a/include/drm/drm_mode.h
+++ b/include/drm/drm_mode.h
@@ -74,6 +74,7 @@
 /* Dithering mode options */
 #define DRM_MODE_DITHERING_OFF	0
 #define DRM_MODE_DITHERING_ON	1
+#define DRM_MODE_DITHERING_AUTO 2
 
 /* Dirty info options */
 #define DRM_MODE_DIRTY_OFF      0
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 2d428b088cc..3a9940ef728 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -146,6 +146,8 @@
 	{0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6889, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x688A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x688C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x688D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6898, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x6899, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x689c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_HEMLOCK|RADEON_NEW_MEMMAP}, \
@@ -161,6 +163,7 @@
 	{0x1002, 0x68be, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_JUNIPER|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68c9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_REDWOOD|RADEON_NEW_MEMMAP}, \
@@ -174,6 +177,7 @@
 	{0x1002, 0x68e8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68e9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68f1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
@@ -314,6 +318,7 @@
 	{0x1002, 0x9456, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x945B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x945E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x946A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -324,6 +329,7 @@
 	{0x1002, 0x9487, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9488, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9489, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x948A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x948F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9490, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9491, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV730|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -366,6 +372,7 @@
 	{0x1002, 0x9553, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9555, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9557, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x955f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV710|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9580, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9581, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x9583, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV630|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
diff --git a/include/drm/i2c/sil164.h b/include/drm/i2c/sil164.h
new file mode 100644
index 00000000000..205e27384c8
--- /dev/null
+++ b/include/drm/i2c/sil164.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2010 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef __DRM_I2C_SIL164_H__
+#define __DRM_I2C_SIL164_H__
+
+/**
+ * struct sil164_encoder_params
+ *
+ * Describes how the sil164 is connected to the GPU. It should be used
+ * as the @params parameter of its @set_config method.
+ *
+ * See "http://www.siliconimage.com/docs/SiI-DS-0021-E-164.pdf".
+ */
+struct sil164_encoder_params {
+	enum {
+		SIL164_INPUT_EDGE_FALLING = 0,
+		SIL164_INPUT_EDGE_RISING
+	} input_edge;
+
+	enum {
+		SIL164_INPUT_WIDTH_12BIT = 0,
+		SIL164_INPUT_WIDTH_24BIT
+	} input_width;
+
+	enum {
+		SIL164_INPUT_SINGLE_EDGE = 0,
+		SIL164_INPUT_DUAL_EDGE
+	} input_dual;
+
+	enum {
+		SIL164_PLL_FILTER_ON = 0,
+		SIL164_PLL_FILTER_OFF,
+	} pll_filter;
+
+	int input_skew; /** < Allowed range [-4, 3], use 0 for no de-skew. */
+	int duallink_skew; /** < Allowed range [-4, 3]. */
+};
+
+#endif
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 5347063e9d5..0acaf8f9143 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -904,6 +904,8 @@ struct drm_radeon_cs {
 #define RADEON_INFO_ACCEL_WORKING	0x03
 #define RADEON_INFO_CRTC_FROM_ID	0x04
 #define RADEON_INFO_ACCEL_WORKING2	0x05
+#define RADEON_INFO_TILING_CONFIG	0x06
+#define RADEON_INFO_WANT_HYPERZ		0x07
 
 struct drm_radeon_info {
 	uint32_t		request;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 0ea602da43e..b87504235f1 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -34,6 +34,7 @@
 #include "ttm/ttm_memory.h"
 #include "ttm/ttm_module.h"
 #include "drm_mm.h"
+#include "drm_global.h"
 #include "linux/workqueue.h"
 #include "linux/fs.h"
 #include "linux/spinlock.h"
@@ -362,7 +363,7 @@ struct ttm_bo_driver {
  */
 
 struct ttm_bo_global_ref {
-	struct ttm_global_reference ref;
+	struct drm_global_reference ref;
 	struct ttm_mem_global *mem_glob;
 };
 
@@ -687,8 +688,8 @@ extern int ttm_mem_io_reserve(struct ttm_bo_device *bdev,
 extern void ttm_mem_io_free(struct ttm_bo_device *bdev,
 				struct ttm_mem_reg *mem);
 
-extern void ttm_bo_global_release(struct ttm_global_reference *ref);
-extern int ttm_bo_global_init(struct ttm_global_reference *ref);
+extern void ttm_bo_global_release(struct drm_global_reference *ref);
+extern int ttm_bo_global_init(struct drm_global_reference *ref);
 
 extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
 
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
index cf416aee19a..45fa318c158 100644
--- a/include/drm/ttm/ttm_module.h
+++ b/include/drm/ttm/ttm_module.h
@@ -35,26 +35,6 @@
 struct kobject;
 
 #define TTM_PFX "[TTM] "
-
-enum ttm_global_types {
-	TTM_GLOBAL_TTM_MEM = 0,
-	TTM_GLOBAL_TTM_BO,
-	TTM_GLOBAL_TTM_OBJECT,
-	TTM_GLOBAL_NUM
-};
-
-struct ttm_global_reference {
-	enum ttm_global_types global_type;
-	size_t size;
-	void *object;
-	int (*init) (struct ttm_global_reference *);
-	void (*release) (struct ttm_global_reference *);
-};
-
-extern void ttm_global_init(void);
-extern void ttm_global_release(void);
-extern int ttm_global_item_ref(struct ttm_global_reference *ref);
-extern void ttm_global_item_unref(struct ttm_global_reference *ref);
 extern struct kobject *ttm_get_kobj(void);
 
 #endif /* _TTM_MODULE_H_ */
diff --git a/include/keys/dns_resolver-type.h b/include/keys/dns_resolver-type.h
new file mode 100644
index 00000000000..9284a19393a
--- /dev/null
+++ b/include/keys/dns_resolver-type.h
@@ -0,0 +1,23 @@
+/* DNS resolver key type
+ *
+ * Copyright (C) 2010 Wang Lei. All Rights Reserved.
+ * Written by Wang Lei (wang840925@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _KEYS_DNS_RESOLVER_TYPE_H
+#define _KEYS_DNS_RESOLVER_TYPE_H
+
+#include <linux/key-type.h>
+
+extern struct key_type key_type_dns_resolver;
+
+extern int request_dns_resolver_key(const char *description,
+				    const char *callout_info,
+				    char **data);
+
+#endif /* _KEYS_DNS_RESOLVER_TYPE_H */
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index f7dd576dd5a..be3d9a77d6e 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -15,11 +15,13 @@
 #ifndef _AHCI_PLATFORM_H
 #define _AHCI_PLATFORM_H
 
+#include <linux/compiler.h>
+
 struct device;
 struct ata_port_info;
 
 struct ahci_platform_data {
-	int (*init)(struct device *dev);
+	int (*init)(struct device *dev, void __iomem *addr);
 	void (*exit)(struct device *dev);
 	const struct ata_port_info *ata_port_info;
 	unsigned int force_port_map;
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 1b9ba193b78..2ce51fac7d3 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -314,15 +314,10 @@ map_bh(struct buffer_head *bh, struct super_block *sb, sector_t block)
 	bh->b_size = sb->s_blocksize;
 }
 
-/*
- * Calling wait_on_buffer() for a zero-ref buffer is illegal, so we call into
- * __wait_on_buffer() just to trip a debug check.  Because debug code in inline
- * functions is bloaty.
- */
 static inline void wait_on_buffer(struct buffer_head *bh)
 {
 	might_sleep();
-	if (buffer_locked(bh) || atomic_read(&bh->b_count) == 0)
+	if (buffer_locked(bh))
 		__wait_on_buffer(bh);
 }
 
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 5ea3c60c160..c37b21ad5a3 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -292,6 +292,8 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
  */
 extern int
 __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq);
+extern void
+__clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq);
 
 static inline int clocksource_register_hz(struct clocksource *cs, u32 hz)
 {
@@ -303,6 +305,15 @@ static inline int clocksource_register_khz(struct clocksource *cs, u32 khz)
 	return __clocksource_register_scale(cs, 1000, khz);
 }
 
+static inline void __clocksource_updatefreq_hz(struct clocksource *cs, u32 hz)
+{
+	__clocksource_updatefreq_scale(cs, 1, hz);
+}
+
+static inline void __clocksource_updatefreq_khz(struct clocksource *cs, u32 khz)
+{
+	__clocksource_updatefreq_scale(cs, 1000, khz);
+}
 
 static inline void
 clocksource_calc_mult_shift(struct clocksource *cs, u32 freq, u32 minsec)
@@ -313,11 +324,13 @@ clocksource_calc_mult_shift(struct clocksource *cs, u32 freq, u32 minsec)
 
 #ifdef CONFIG_GENERIC_TIME_VSYSCALL
 extern void
-update_vsyscall(struct timespec *ts, struct clocksource *c, u32 mult);
+update_vsyscall(struct timespec *ts, struct timespec *wtm,
+			struct clocksource *c, u32 mult);
 extern void update_vsyscall_tz(void);
 #else
 static inline void
-update_vsyscall(struct timespec *ts, struct clocksource *c, u32 mult)
+update_vsyscall(struct timespec *ts, struct timespec *wtm,
+			struct clocksource *c, u32 mult)
 {
 }
 
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index 0da5b187f12..16508bcddac 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -35,8 +35,7 @@
     (typeof(ptr)) (__ptr + (off)); })
 
 /* &a[0] degrades to a pointer: a different type from an array */
-#define __must_be_array(a) \
-  BUILD_BUG_ON_ZERO(__builtin_types_compatible_p(typeof(a), typeof(&a[0])))
+#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0]))
 
 /*
  * Force always-inline if the user requests it so via the .config,
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index a5a472b1074..c1a62c56a66 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -16,6 +16,7 @@
 # define __release(x)	__context__(x,-1)
 # define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
 # define __percpu	__attribute__((noderef, address_space(3)))
+# define __rcu
 extern void __chk_user_ptr(const volatile void __user *);
 extern void __chk_io_ptr(const volatile void __iomem *);
 #else
@@ -34,6 +35,7 @@ extern void __chk_io_ptr(const volatile void __iomem *);
 # define __release(x) (void)0
 # define __cond_lock(x,c) (c)
 # define __percpu
+# define __rcu
 #endif
 
 #ifdef __KERNEL__
diff --git a/include/linux/console.h b/include/linux/console.h
index dcca5339ceb..95cf6f08a59 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -55,6 +55,16 @@ struct consw {
 	void	(*con_invert_region)(struct vc_data *, u16 *, int);
 	u16    *(*con_screen_pos)(struct vc_data *, int);
 	unsigned long (*con_getxy)(struct vc_data *, unsigned long, int *, int *);
+	/*
+	 * Prepare the console for the debugger.  This includes, but is not
+	 * limited to, unblanking the console, loading an appropriate
+	 * palette, and allowing debugger generated output.
+	 */
+	int	(*con_debug_enter)(struct vc_data *);
+	/*
+	 * Restore the console to its pre-debug state as closely as possible.
+	 */
+	int	(*con_debug_leave)(struct vc_data *);
 };
 
 extern const struct consw *conswitchp;
@@ -69,6 +79,14 @@ int register_con_driver(const struct consw *csw, int first, int last);
 int unregister_con_driver(const struct consw *csw);
 int take_over_console(const struct consw *sw, int first, int last, int deflt);
 void give_up_console(const struct consw *sw);
+#ifdef CONFIG_HW_CONSOLE
+int con_debug_enter(struct vc_data *vc);
+int con_debug_leave(void);
+#else
+#define con_debug_enter(vc) (0)
+#define con_debug_leave() (0)
+#endif
+
 /* scroll */
 #define SM_UP       (1)
 #define SM_DOWN     (2)
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index e287863ac05..4823af64e9d 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -48,6 +48,33 @@ extern ssize_t arch_cpu_release(const char *, size_t);
 #endif
 struct notifier_block;
 
+/*
+ * CPU notifier priorities.
+ */
+enum {
+	/*
+	 * SCHED_ACTIVE marks a cpu which is coming up active during
+	 * CPU_ONLINE and CPU_DOWN_FAILED and must be the first
+	 * notifier.  CPUSET_ACTIVE adjusts cpuset according to
+	 * cpu_active mask right after SCHED_ACTIVE.  During
+	 * CPU_DOWN_PREPARE, SCHED_INACTIVE and CPUSET_INACTIVE are
+	 * ordered in the similar way.
+	 *
+	 * This ordering guarantees consistent cpu_active mask and
+	 * migration behavior to all cpu notifiers.
+	 */
+	CPU_PRI_SCHED_ACTIVE	= INT_MAX,
+	CPU_PRI_CPUSET_ACTIVE	= INT_MAX - 1,
+	CPU_PRI_SCHED_INACTIVE	= INT_MIN + 1,
+	CPU_PRI_CPUSET_INACTIVE	= INT_MIN,
+
+	/* migration should happen before other stuff but after perf */
+	CPU_PRI_PERF		= 20,
+	CPU_PRI_MIGRATION	= 10,
+	/* prepare workqueues for other notifiers */
+	CPU_PRI_WORKQUEUE	= 5,
+};
+
 #ifdef CONFIG_SMP
 /* Need to know about CPUs going up/down? */
 #if defined(CONFIG_HOTPLUG_CPU) || !defined(MODULE)
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 55215cce500..36ca9721a0c 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -52,6 +52,7 @@ struct cpuidle_state {
 #define CPUIDLE_FLAG_SHALLOW	(0x20) /* low latency, minimal savings */
 #define CPUIDLE_FLAG_BALANCED	(0x40) /* medium latency, moderate savings */
 #define CPUIDLE_FLAG_DEEP	(0x80) /* high latency, large savings */
+#define CPUIDLE_FLAG_IGNORE	(0x100) /* ignore during this idle period */
 
 #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
 
@@ -84,6 +85,7 @@ struct cpuidle_state_kobj {
 struct cpuidle_device {
 	unsigned int		registered:1;
 	unsigned int		enabled:1;
+	unsigned int		power_specified:1;
 	unsigned int		cpu;
 
 	int			last_residency;
@@ -97,6 +99,8 @@ struct cpuidle_device {
 	struct completion	kobj_unregister;
 	void			*governor_data;
 	struct cpuidle_state	*safe_state;
+
+	int (*prepare)		(struct cpuidle_device *dev);
 };
 
 DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index 457ed765a11..f20eb8f1602 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -20,6 +20,7 @@ extern int number_of_cpusets;	/* How many cpusets are defined in system? */
 
 extern int cpuset_init(void);
 extern void cpuset_init_smp(void);
+extern void cpuset_update_active_cpus(void);
 extern void cpuset_cpus_allowed(struct task_struct *p, struct cpumask *mask);
 extern int cpuset_cpus_allowed_fallback(struct task_struct *p);
 extern nodemask_t cpuset_mems_allowed(struct task_struct *p);
@@ -132,6 +133,11 @@ static inline void set_mems_allowed(nodemask_t nodemask)
 static inline int cpuset_init(void) { return 0; }
 static inline void cpuset_init_smp(void) {}
 
+static inline void cpuset_update_active_cpus(void)
+{
+	partition_sched_domains(1, NULL, NULL);
+}
+
 static inline void cpuset_cpus_allowed(struct task_struct *p,
 				       struct cpumask *mask)
 {
diff --git a/include/linux/delay.h b/include/linux/delay.h
index fd832c6d419..a6ecb34cf54 100644
--- a/include/linux/delay.h
+++ b/include/linux/delay.h
@@ -45,6 +45,7 @@ extern unsigned long lpj_fine;
 void calibrate_delay(void);
 void msleep(unsigned int msecs);
 unsigned long msleep_interruptible(unsigned int msecs);
+void usleep_range(unsigned long min, unsigned long max);
 
 static inline void ssleep(unsigned int seconds)
 {
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a8276f683b..516fecacf27 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -84,9 +84,8 @@ struct device *bus_find_device_by_name(struct bus_type *bus,
 				       struct device *start,
 				       const char *name);
 
-int __must_check bus_for_each_drv(struct bus_type *bus,
-				  struct device_driver *start, void *data,
-				  int (*fn)(struct device_driver *, void *));
+int bus_for_each_drv(struct bus_type *bus, struct device_driver *start,
+		     void *data, int (*fn)(struct device_driver *, void *));
 
 void bus_sort_breadthfirst(struct bus_type *bus,
 			   int (*compare)(const struct device *a,
@@ -110,10 +109,12 @@ extern int bus_unregister_notifier(struct bus_type *bus,
  */
 #define BUS_NOTIFY_ADD_DEVICE		0x00000001 /* device added */
 #define BUS_NOTIFY_DEL_DEVICE		0x00000002 /* device removed */
-#define BUS_NOTIFY_BOUND_DRIVER		0x00000003 /* driver bound to device */
-#define BUS_NOTIFY_UNBIND_DRIVER	0x00000004 /* driver about to be
+#define BUS_NOTIFY_BIND_DRIVER		0x00000003 /* driver about to be
+						      bound */
+#define BUS_NOTIFY_BOUND_DRIVER		0x00000004 /* driver bound to device */
+#define BUS_NOTIFY_UNBIND_DRIVER	0x00000005 /* driver about to be
 						      unbound */
-#define BUS_NOTIFY_UNBOUND_DRIVER	0x00000005 /* driver is unbound
+#define BUS_NOTIFY_UNBOUND_DRIVER	0x00000006 /* driver is unbound
 						      from the device */
 
 extern struct kset *bus_get_kset(struct bus_type *bus);
@@ -551,7 +552,7 @@ extern int device_for_each_child(struct device *dev, void *data,
 		     int (*fn)(struct device *dev, void *data));
 extern struct device *device_find_child(struct device *dev, void *data,
 				int (*match)(struct device *dev, void *data));
-extern int device_rename(struct device *dev, char *new_name);
+extern int device_rename(struct device *dev, const char *new_name);
 extern int device_move(struct device *dev, struct device *new_parent,
 		       enum dpm_order dpm_order);
 extern const char *device_get_devnode(struct device *dev,
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 5204f018931..c61d4ca27bc 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -114,11 +114,17 @@ enum dma_ctrl_flags {
  * @DMA_TERMINATE_ALL: terminate all ongoing transfers
  * @DMA_PAUSE: pause ongoing transfers
  * @DMA_RESUME: resume paused transfer
+ * @DMA_SLAVE_CONFIG: this command is only implemented by DMA controllers
+ * that need to runtime reconfigure the slave channels (as opposed to passing
+ * configuration data in statically from the platform). An additional
+ * argument of struct dma_slave_config must be passed in with this
+ * command.
  */
 enum dma_ctrl_cmd {
 	DMA_TERMINATE_ALL,
 	DMA_PAUSE,
 	DMA_RESUME,
+	DMA_SLAVE_CONFIG,
 };
 
 /**
@@ -199,6 +205,71 @@ struct dma_chan_dev {
 	atomic_t *idr_ref;
 };
 
+/**
+ * enum dma_slave_buswidth - defines bus with of the DMA slave
+ * device, source or target buses
+ */
+enum dma_slave_buswidth {
+	DMA_SLAVE_BUSWIDTH_UNDEFINED = 0,
+	DMA_SLAVE_BUSWIDTH_1_BYTE = 1,
+	DMA_SLAVE_BUSWIDTH_2_BYTES = 2,
+	DMA_SLAVE_BUSWIDTH_4_BYTES = 4,
+	DMA_SLAVE_BUSWIDTH_8_BYTES = 8,
+};
+
+/**
+ * struct dma_slave_config - dma slave channel runtime config
+ * @direction: whether the data shall go in or out on this slave
+ * channel, right now. DMA_TO_DEVICE and DMA_FROM_DEVICE are
+ * legal values, DMA_BIDIRECTIONAL is not acceptable since we
+ * need to differentiate source and target addresses.
+ * @src_addr: this is the physical address where DMA slave data
+ * should be read (RX), if the source is memory this argument is
+ * ignored.
+ * @dst_addr: this is the physical address where DMA slave data
+ * should be written (TX), if the source is memory this argument
+ * is ignored.
+ * @src_addr_width: this is the width in bytes of the source (RX)
+ * register where DMA data shall be read. If the source
+ * is memory this may be ignored depending on architecture.
+ * Legal values: 1, 2, 4, 8.
+ * @dst_addr_width: same as src_addr_width but for destination
+ * target (TX) mutatis mutandis.
+ * @src_maxburst: the maximum number of words (note: words, as in
+ * units of the src_addr_width member, not bytes) that can be sent
+ * in one burst to the device. Typically something like half the
+ * FIFO depth on I/O peripherals so you don't overflow it. This
+ * may or may not be applicable on memory sources.
+ * @dst_maxburst: same as src_maxburst but for destination target
+ * mutatis mutandis.
+ *
+ * This struct is passed in as configuration data to a DMA engine
+ * in order to set up a certain channel for DMA transport at runtime.
+ * The DMA device/engine has to provide support for an additional
+ * command in the channel config interface, DMA_SLAVE_CONFIG
+ * and this struct will then be passed in as an argument to the
+ * DMA engine device_control() function.
+ *
+ * The rationale for adding configuration information to this struct
+ * is as follows: if it is likely that most DMA slave controllers in
+ * the world will support the configuration option, then make it
+ * generic. If not: if it is fixed so that it be sent in static from
+ * the platform data, then prefer to do that. Else, if it is neither
+ * fixed at runtime, nor generic enough (such as bus mastership on
+ * some CPU family and whatnot) then create a custom slave config
+ * struct and pass that, then make this config a member of that
+ * struct, if applicable.
+ */
+struct dma_slave_config {
+	enum dma_data_direction direction;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	enum dma_slave_buswidth src_addr_width;
+	enum dma_slave_buswidth dst_addr_width;
+	u32 src_maxburst;
+	u32 dst_maxburst;
+};
+
 static inline const char *dma_chan_name(struct dma_chan *chan)
 {
 	return dev_name(&chan->dev->device);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index a8a3e1ac281..90e087f8d95 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -20,6 +20,7 @@ enum dmi_device_type {
 	DMI_DEV_TYPE_SAS,
 	DMI_DEV_TYPE_IPMI = -1,
 	DMI_DEV_TYPE_OEM_STRING = -2,
+	DMI_DEV_TYPE_DEV_ONBOARD = -3,
 };
 
 struct dmi_header {
@@ -37,6 +38,14 @@ struct dmi_device {
 
 #ifdef CONFIG_DMI
 
+struct dmi_dev_onboard {
+	struct dmi_device dev;
+	int instance;
+	int segment;
+	int bus;
+	int devfn;
+};
+
 extern int dmi_check_system(const struct dmi_system_id *list);
 const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
 extern const char * dmi_get_system_info(int field);
diff --git a/include/linux/dns_resolver.h b/include/linux/dns_resolver.h
new file mode 100644
index 00000000000..cc92268af89
--- /dev/null
+++ b/include/linux/dns_resolver.h
@@ -0,0 +1,34 @@
+/*
+ *   DNS Resolver upcall management for CIFS DFS and AFS
+ *   Handles host name to IP address resolution and DNS query for AFSDB RR.
+ *
+ *   Copyright (c) International Business Machines  Corp., 2008
+ *   Author(s): Steve French (sfrench@us.ibm.com)
+ *              Wang Lei (wang840925@gmail.com)
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _LINUX_DNS_RESOLVER_H
+#define _LINUX_DNS_RESOLVER_H
+
+#ifdef __KERNEL__
+
+extern int dns_query(const char *type, const char *name, size_t namelen,
+		     const char *options, char **_result, time_t *_expiry);
+
+#endif /* KERNEL */
+
+#endif /* _LINUX_DNS_RESOLVER_H */
diff --git a/include/linux/dqblk_xfs.h b/include/linux/dqblk_xfs.h
index 4389ae72024..86552807aed 100644
--- a/include/linux/dqblk_xfs.h
+++ b/include/linux/dqblk_xfs.h
@@ -49,7 +49,7 @@
 #define FS_DQUOT_VERSION	1	/* fs_disk_quota.d_version */
 typedef struct fs_disk_quota {
 	__s8		d_version;	/* version of this structure */
-	__s8		d_flags;	/* XFS_{USER,PROJ,GROUP}_QUOTA */
+	__s8		d_flags;	/* FS_{USER,PROJ,GROUP}_QUOTA */
 	__u16		d_fieldmask;	/* field specifier */
 	__u32		d_id;		/* user, project, or group ID */
 	__u64		d_blk_hardlimit;/* absolute limit on disk blks */
@@ -119,18 +119,18 @@ typedef struct fs_disk_quota {
 #define FS_DQ_ACCT_MASK		(FS_DQ_BCOUNT | FS_DQ_ICOUNT | FS_DQ_RTBCOUNT)
 
 /*
- * Various flags related to quotactl(2).  Only relevant to XFS filesystems.
+ * Various flags related to quotactl(2).
  */
-#define XFS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
-#define XFS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
-#define XFS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
-#define XFS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
-#define XFS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
-#define XFS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
+#define FS_QUOTA_UDQ_ACCT	(1<<0)  /* user quota accounting */
+#define FS_QUOTA_UDQ_ENFD	(1<<1)  /* user quota limits enforcement */
+#define FS_QUOTA_GDQ_ACCT	(1<<2)  /* group quota accounting */
+#define FS_QUOTA_GDQ_ENFD	(1<<3)  /* group quota limits enforcement */
+#define FS_QUOTA_PDQ_ACCT	(1<<4)  /* project quota accounting */
+#define FS_QUOTA_PDQ_ENFD	(1<<5)  /* project quota limits enforcement */
 
-#define XFS_USER_QUOTA		(1<<0)	/* user quota type */
-#define XFS_PROJ_QUOTA		(1<<1)	/* project quota type */
-#define XFS_GROUP_QUOTA		(1<<2)	/* group quota type */
+#define FS_USER_QUOTA		(1<<0)	/* user quota type */
+#define FS_PROJ_QUOTA		(1<<1)	/* project quota type */
+#define FS_GROUP_QUOTA		(1<<2)	/* group quota type */
 
 /*
  * fs_quota_stat is the struct returned in Q_XGETQSTAT for a given file system.
@@ -151,7 +151,7 @@ typedef struct fs_qfilestat {
 
 typedef struct fs_quota_stat {
 	__s8		qs_version;	/* version number for future changes */
-	__u16		qs_flags;	/* XFS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
+	__u16		qs_flags;	/* FS_QUOTA_{U,P,G}DQ_{ACCT,ENFD} */
 	__s8		qs_pad;		/* unused */
 	fs_qfilestat_t	qs_uquota;	/* user quota storage information */
 	fs_qfilestat_t	qs_gquota;	/* group quota storage information */
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 7fc62d4550b..3d3a9915dde 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -400,7 +400,6 @@ struct ext3_inode {
 #define EXT3_MOUNT_POSIX_ACL		0x08000	/* POSIX Access Control Lists */
 #define EXT3_MOUNT_RESERVATION		0x10000	/* Preallocation */
 #define EXT3_MOUNT_BARRIER		0x20000 /* Use block barriers */
-#define EXT3_MOUNT_NOBH			0x40000 /* No bufferheads */
 #define EXT3_MOUNT_QUOTA		0x80000 /* Some quota option set */
 #define EXT3_MOUNT_USRQUOTA		0x100000 /* "old" user quota */
 #define EXT3_MOUNT_GRPQUOTA		0x200000 /* "old" group quota */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index e7445df44d6..0c5659c41b0 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -3,6 +3,9 @@
 
 #include <linux/types.h>
 #include <linux/i2c.h>
+#ifdef __KERNEL__
+#include <linux/kgdb.h>
+#endif /* __KERNEL__ */
 
 /* Definitions of frame buffers						*/
 
@@ -607,6 +610,12 @@ struct fb_deferred_io {
  * LOCKING NOTE: those functions must _ALL_ be called with the console
  * semaphore held, this is the only suitable locking mechanism we have
  * in 2.6. Some may be called at interrupt time at this point though.
+ *
+ * The exception to this is the debug related hooks.  Putting the fb
+ * into a debug state (e.g. flipping to the kernel console) and restoring
+ * it must be done in a lock-free manner, so low level drivers should
+ * keep track of the initial console (if applicable) and may need to
+ * perform direct, unlocked hardware writes in these hooks.
  */
 
 struct fb_ops {
@@ -676,6 +685,10 @@ struct fb_ops {
 
 	/* teardown any resources to do with this framebuffer */
 	void (*fb_destroy)(struct fb_info *info);
+
+	/* called at KDB enter and leave time to prepare the console */
+	int (*fb_debug_enter)(struct fb_info *info);
+	int (*fb_debug_leave)(struct fb_info *info);
 };
 
 #ifdef CONFIG_FB_TILEBLITTING
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index d147461bc27..f59ed297b66 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -11,6 +11,7 @@
 #include <linux/rcupdate.h>
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/fs.h>
 
 #include <asm/atomic.h>
 
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 68f883b30a5..68c642d8843 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -30,12 +30,18 @@
 #include <linux/types.h>
 #include <linux/firewire-constants.h>
 
-#define FW_CDEV_EVENT_BUS_RESET			0x00
-#define FW_CDEV_EVENT_RESPONSE			0x01
-#define FW_CDEV_EVENT_REQUEST			0x02
-#define FW_CDEV_EVENT_ISO_INTERRUPT		0x03
-#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED	0x04
-#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED	0x05
+#define FW_CDEV_EVENT_BUS_RESET				0x00
+#define FW_CDEV_EVENT_RESPONSE				0x01
+#define FW_CDEV_EVENT_REQUEST				0x02
+#define FW_CDEV_EVENT_ISO_INTERRUPT			0x03
+#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED		0x04
+#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED		0x05
+
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_EVENT_REQUEST2				0x06
+#define FW_CDEV_EVENT_PHY_PACKET_SENT			0x07
+#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED		0x08
+#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL	0x09
 
 /**
  * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
@@ -68,6 +74,10 @@ struct fw_cdev_event_common {
  * This event is sent when the bus the device belongs to goes through a bus
  * reset.  It provides information about the new bus configuration, such as
  * new node ID for this device, new root ID, and others.
+ *
+ * If @bm_node_id is 0xffff right after bus reset it can be reread by an
+ * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
+ * Kernels with ABI version < 4 do not set @bm_node_id.
  */
 struct fw_cdev_event_bus_reset {
 	__u64 closure;
@@ -82,8 +92,9 @@ struct fw_cdev_event_bus_reset {
 
 /**
  * struct fw_cdev_event_response - Sent when a response packet was received
- * @closure:	See &fw_cdev_event_common;
- *		set by %FW_CDEV_IOC_SEND_REQUEST ioctl
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
+ *		or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
+ *		or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
  * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
  * @rcode:	Response code returned by the remote node
  * @length:	Data length, i.e. the response's payload size in bytes
@@ -93,6 +104,11 @@ struct fw_cdev_event_bus_reset {
  * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl.  The payload data for responses
  * carrying data (read and lock responses) follows immediately and can be
  * accessed through the @data field.
+ *
+ * The event is also generated after conclusions of transactions that do not
+ * involve response packets.  This includes unified write transactions,
+ * broadcast write transactions, and transmission of asynchronous stream
+ * packets.  @rcode indicates success or failure of such transmissions.
  */
 struct fw_cdev_event_response {
 	__u64 closure;
@@ -103,11 +119,46 @@ struct fw_cdev_event_response {
 };
 
 /**
- * struct fw_cdev_event_request - Sent on incoming request to an address region
+ * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
  * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
  * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
+ * @tcode:	See &fw_cdev_event_request2
+ * @offset:	See &fw_cdev_event_request2
+ * @handle:	See &fw_cdev_event_request2
+ * @length:	See &fw_cdev_event_request2
+ * @data:	See &fw_cdev_event_request2
+ *
+ * This event is sent instead of &fw_cdev_event_request2 if the kernel or
+ * the client implements ABI version <= 3.
+ *
+ * Unlike &fw_cdev_event_request2, the sender identity cannot be established,
+ * broadcast write requests cannot be distinguished from unicast writes, and
+ * @tcode of lock requests is %TCODE_LOCK_REQUEST.
+ *
+ * Requests to the FCP_REQUEST or FCP_RESPONSE register are responded to as
+ * with &fw_cdev_event_request2, except in kernel 2.6.32 and older which send
+ * the response packet of the client's %FW_CDEV_IOC_SEND_RESPONSE ioctl.
+ */
+struct fw_cdev_event_request {
+	__u64 closure;
+	__u32 type;
+	__u32 tcode;
+	__u64 offset;
+	__u32 handle;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
+ * struct fw_cdev_event_request2 - Sent on incoming request to an address region
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
+ * @type:	See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
  * @tcode:	Transaction code of the incoming request
  * @offset:	The offset into the 48-bit per-node address space
+ * @source_node_id: Sender node ID
+ * @destination_node_id: Destination node ID
+ * @card:	The index of the card from which the request came
+ * @generation:	Bus generation in which the request is valid
  * @handle:	Reference to the kernel-side pending request
  * @length:	Data length, i.e. the request's payload size in bytes
  * @data:	Incoming data, if any
@@ -120,12 +171,42 @@ struct fw_cdev_event_response {
  *
  * The payload data for requests carrying data (write and lock requests)
  * follows immediately and can be accessed through the @data field.
+ *
+ * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
+ * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
+ * i.e. encodes the extended transaction code.
+ *
+ * @card may differ from &fw_cdev_get_info.card because requests are received
+ * from all cards of the Linux host.  @source_node_id, @destination_node_id, and
+ * @generation pertain to that card.  Destination node ID and bus generation may
+ * therefore differ from the corresponding fields of the last
+ * &fw_cdev_event_bus_reset.
+ *
+ * @destination_node_id may also differ from the current node ID because of a
+ * non-local bus ID part or in case of a broadcast write request.  Note, a
+ * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
+ * broadcast write request; the kernel will then release the kernel-side pending
+ * request but will not actually send a response packet.
+ *
+ * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
+ * sent a write response immediately after the request was received; in this
+ * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
+ * release the kernel-side pending request, though another response won't be
+ * sent.
+ *
+ * If the client subsequently needs to initiate requests to the sender node of
+ * an &fw_cdev_event_request2, it needs to use a device file with matching
+ * card index, node ID, and generation for outbound requests.
  */
-struct fw_cdev_event_request {
+struct fw_cdev_event_request2 {
 	__u64 closure;
 	__u32 type;
 	__u32 tcode;
 	__u64 offset;
+	__u32 source_node_id;
+	__u32 destination_node_id;
+	__u32 card;
+	__u32 generation;
 	__u32 handle;
 	__u32 length;
 	__u32 data[0];
@@ -141,26 +222,43 @@ struct fw_cdev_event_request {
  * @header:	Stripped headers, if any
  *
  * This event is sent when the controller has completed an &fw_cdev_iso_packet
- * with the %FW_CDEV_ISO_INTERRUPT bit set.  In the receive case, the headers
- * stripped of all packets up until and including the interrupt packet are
- * returned in the @header field.  The amount of header data per packet is as
- * specified at iso context creation by &fw_cdev_create_iso_context.header_size.
+ * with the %FW_CDEV_ISO_INTERRUPT bit set.
  *
- * In version 1 of this ABI, header data consisted of the 1394 isochronous
- * packet header, followed by quadlets from the packet payload if
- * &fw_cdev_create_iso_context.header_size > 4.
+ * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
  *
- * In version 2 of this ABI, header data consist of the 1394 isochronous
- * packet header, followed by a timestamp quadlet if
- * &fw_cdev_create_iso_context.header_size > 4, followed by quadlets from the
- * packet payload if &fw_cdev_create_iso_context.header_size > 8.
+ * In version 3 and some implementations of version 2 of the ABI, &header_length
+ * is a multiple of 4 and &header contains timestamps of all packets up until
+ * the interrupt packet.  The format of the timestamps is as described below for
+ * isochronous reception.  In version 1 of the ABI, &header_length was 0.
  *
- * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
+ * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
+ *
+ * The headers stripped of all packets up until and including the interrupt
+ * packet are returned in the @header field.  The amount of header data per
+ * packet is as specified at iso context creation by
+ * &fw_cdev_create_iso_context.header_size.
+ *
+ * Hence, _interrupt.header_length / _context.header_size is the number of
+ * packets received in this interrupt event.  The client can now iterate
+ * through the mmap()'ed DMA buffer according to this number of packets and
+ * to the buffer sizes as the client specified in &fw_cdev_queue_iso.
+ *
+ * Since version 2 of this ABI, the portion for each packet in _interrupt.header
+ * consists of the 1394 isochronous packet header, followed by a timestamp
+ * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
+ * from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
  *
- * Format of 1394 iso packet header: 16 bits len, 2 bits tag, 6 bits channel,
- * 4 bits tcode, 4 bits sy, in big endian byte order.  Format of timestamp:
- * 16 bits invalid, 3 bits cycleSeconds, 13 bits cycleCount, in big endian byte
- * order.
+ * Format of 1394 iso packet header:  16 bits data_length, 2 bits tag, 6 bits
+ * channel, 4 bits tcode, 4 bits sy, in big endian byte order.
+ * data_length is the actual received size of the packet without the four
+ * 1394 iso packet header bytes.
+ *
+ * Format of timestamp:  16 bits invalid, 3 bits cycleSeconds, 13 bits
+ * cycleCount, in big endian byte order.
+ *
+ * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
+ * data followed directly after the 1394 is header if header_size > 4.
+ * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
  */
 struct fw_cdev_event_iso_interrupt {
 	__u64 closure;
@@ -171,6 +269,43 @@ struct fw_cdev_event_iso_interrupt {
 };
 
 /**
+ * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
+ * @closure:	See &fw_cdev_event_common;
+ *		set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
+ * @type:	%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @completed:	Offset into the receive buffer; data before this offest is valid
+ *
+ * This event is sent in multichannel contexts (context type
+ * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
+ * chunks that have the %FW_CDEV_ISO_INTERRUPT bit set.  Whether this happens
+ * when a packet is completed and/or when a buffer chunk is completed depends
+ * on the hardware implementation.
+ *
+ * The buffer is continuously filled with the following data, per packet:
+ *  - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
+ *    but in little endian byte order,
+ *  - packet payload (as many bytes as specified in the data_length field of
+ *    the 1394 iso packet header) in big endian byte order,
+ *  - 0...3 padding bytes as needed to align the following trailer quadlet,
+ *  - trailer quadlet, containing the reception timestamp as described at
+ *    &fw_cdev_event_iso_interrupt, but in little endian byte order.
+ *
+ * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
+ * When processing the data, stop before a packet that would cross the
+ * @completed offset.
+ *
+ * A packet near the end of a buffer chunk will typically spill over into the
+ * next queued buffer chunk.  It is the responsibility of the client to check
+ * for this condition, assemble a broken-up packet from its parts, and not to
+ * re-queue any buffer chunks in which as yet unread packet parts reside.
+ */
+struct fw_cdev_event_iso_interrupt_mc {
+	__u64 closure;
+	__u32 type;
+	__u32 completed;
+};
+
+/**
  * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
  * @closure:	See &fw_cdev_event_common;
  *		set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
@@ -200,15 +335,45 @@ struct fw_cdev_event_iso_resource {
 };
 
 /**
+ * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
+ * @closure:	See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
+ *		or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
+ * @type:	%FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
+ * @rcode:	%RCODE_..., indicates success or failure of transmission
+ * @length:	Data length in bytes
+ * @data:	Incoming data
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
+ * except in case of a ping packet:  Then, @length is 4, and @data[0] is the
+ * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
+ *
+ * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
+ * consists of the two PHY packet quadlets, in host byte order.
+ */
+struct fw_cdev_event_phy_packet {
+	__u64 closure;
+	__u32 type;
+	__u32 rcode;
+	__u32 length;
+	__u32 data[0];
+};
+
+/**
  * union fw_cdev_event - Convenience union of fw_cdev_event_ types
- * @common:        Valid for all types
- * @bus_reset:     Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
- * @response:      Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
- * @request:       Valid if @common.type == %FW_CDEV_EVENT_REQUEST
- * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
- * @iso_resource:  Valid if @common.type ==
+ * @common:		Valid for all types
+ * @bus_reset:		Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
+ * @response:		Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
+ * @request:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST
+ * @request2:		Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
+ * @iso_interrupt:	Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
+ * @iso_interrupt_mc:	Valid if @common.type ==
+ *				%FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
+ * @iso_resource:	Valid if @common.type ==
  *				%FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
  *				%FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
+ * @phy_packet:		Valid if @common.type ==
+ *				%FW_CDEV_EVENT_PHY_PACKET_SENT or
+ *				%FW_CDEV_EVENT_PHY_PACKET_RECEIVED
  *
  * Convenience union for userspace use.  Events could be read(2) into an
  * appropriately aligned char buffer and then cast to this union for further
@@ -223,8 +388,11 @@ union fw_cdev_event {
 	struct fw_cdev_event_bus_reset		bus_reset;
 	struct fw_cdev_event_response		response;
 	struct fw_cdev_event_request		request;
+	struct fw_cdev_event_request2		request2;		/* added in 2.6.36 */
 	struct fw_cdev_event_iso_interrupt	iso_interrupt;
-	struct fw_cdev_event_iso_resource	iso_resource;
+	struct fw_cdev_event_iso_interrupt_mc	iso_interrupt_mc;	/* added in 2.6.36 */
+	struct fw_cdev_event_iso_resource	iso_resource;		/* added in 2.6.30 */
+	struct fw_cdev_event_phy_packet		phy_packet;		/* added in 2.6.36 */
 };
 
 /* available since kernel version 2.6.22 */
@@ -256,23 +424,46 @@ union fw_cdev_event {
 /* available since kernel version 2.6.34 */
 #define FW_CDEV_IOC_GET_CYCLE_TIMER2   _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
 
+/* available since kernel version 2.6.36 */
+#define FW_CDEV_IOC_SEND_PHY_PACKET    _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
+#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
+#define FW_CDEV_IOC_SET_ISO_CHANNELS    _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
+
 /*
- * FW_CDEV_VERSION History
+ * ABI version history
  *  1  (2.6.22)  - initial version
+ *     (2.6.24)  - added %FW_CDEV_IOC_GET_CYCLE_TIMER
  *  2  (2.6.30)  - changed &fw_cdev_event_iso_interrupt.header if
  *                 &fw_cdev_create_iso_context.header_size is 8 or more
+ *               - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
+ *                 %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
+ *                 %FW_CDEV_IOC_SEND_STREAM_PACKET
  *     (2.6.32)  - added time stamp to xmit &fw_cdev_event_iso_interrupt
  *     (2.6.33)  - IR has always packet-per-buffer semantics now, not one of
  *                 dual-buffer or packet-per-buffer depending on hardware
+ *               - shared use and auto-response for FCP registers
  *  3  (2.6.34)  - made &fw_cdev_get_cycle_timer reliable
+ *               - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
+ *  4  (2.6.36)  - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
+ *                 and &fw_cdev_allocate.region_end
+ *               - implemented &fw_cdev_event_bus_reset.bm_node_id
+ *               - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
+ *               - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
+ *                 %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
+ *                 %FW_CDEV_IOC_SET_ISO_CHANNELS
  */
-#define FW_CDEV_VERSION 3
+#define FW_CDEV_VERSION 3 /* Meaningless; don't use this macro. */
 
 /**
  * struct fw_cdev_get_info - General purpose information ioctl
- * @version:	The version field is just a running serial number.
- *		We never break backwards compatibility, but may add more
- *		structs and ioctls in later revisions.
+ * @version:	The version field is just a running serial number.  Both an
+ *		input parameter (ABI version implemented by the client) and
+ *		output parameter (ABI version implemented by the kernel).
+ *		A client must not fill in an %FW_CDEV_VERSION defined from an
+ *		included kernel header file but the actual version for which
+ *		the client was implemented.  This is necessary for forward
+ *		compatibility.  We never break backwards compatibility, but
+ *		may add more structs, events, and ioctls in later revisions.
  * @rom_length:	If @rom is non-zero, at most rom_length bytes of configuration
  *		ROM will be copied into that user space address.  In either
  *		case, @rom_length is updated with the actual length of the
@@ -339,28 +530,48 @@ struct fw_cdev_send_response {
 };
 
 /**
- * struct fw_cdev_allocate - Allocate a CSR address range
+ * struct fw_cdev_allocate - Allocate a CSR in an address range
  * @offset:	Start offset of the address range
  * @closure:	To be passed back to userspace in request events
- * @length:	Length of the address range, in bytes
+ * @length:	Length of the CSR, in bytes
  * @handle:	Handle to the allocation, written by the kernel
+ * @region_end:	First address above the address range (added in ABI v4, 2.6.36)
  *
  * Allocate an address range in the 48-bit address space on the local node
  * (the controller).  This allows userspace to listen for requests with an
- * offset within that address range.  When the kernel receives a request
- * within the range, an &fw_cdev_event_request event will be written back.
- * The @closure field is passed back to userspace in the response event.
+ * offset within that address range.  Every time when the kernel receives a
+ * request within the range, an &fw_cdev_event_request2 event will be emitted.
+ * (If the kernel or the client implements ABI version <= 3, an
+ * &fw_cdev_event_request will be generated instead.)
+ *
+ * The @closure field is passed back to userspace in these request events.
  * The @handle field is an out parameter, returning a handle to the allocated
  * range to be used for later deallocation of the range.
  *
  * The address range is allocated on all local nodes.  The address allocation
- * is exclusive except for the FCP command and response registers.
+ * is exclusive except for the FCP command and response registers.  If an
+ * exclusive address region is already in use, the ioctl fails with errno set
+ * to %EBUSY.
+ *
+ * If kernel and client implement ABI version >= 4, the kernel looks up a free
+ * spot of size @length inside [@offset..@region_end) and, if found, writes
+ * the start address of the new CSR back in @offset.  I.e. @offset is an
+ * in and out parameter.  If this automatic placement of a CSR in a bigger
+ * address range is not desired, the client simply needs to set @region_end
+ * = @offset + @length.
+ *
+ * If the kernel or the client implements ABI version <= 3, @region_end is
+ * ignored and effectively assumed to be @offset + @length.
+ *
+ * @region_end is only present in a kernel header >= 2.6.36.  If necessary,
+ * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
  */
 struct fw_cdev_allocate {
 	__u64 offset;
 	__u64 closure;
 	__u32 length;
 	__u32 handle;
+	__u64 region_end;	/* available since kernel version 2.6.36 */
 };
 
 /**
@@ -382,9 +593,14 @@ struct fw_cdev_deallocate {
  * Initiate a bus reset for the bus this device is on.  The bus reset can be
  * either the original (long) bus reset or the arbitrated (short) bus reset
  * introduced in 1394a-2000.
+ *
+ * The ioctl returns immediately.  A subsequent &fw_cdev_event_bus_reset
+ * indicates when the reset actually happened.  Since ABI v4, this may be
+ * considerably later than the ioctl because the kernel ensures a grace period
+ * between subsequent bus resets as per IEEE 1394 bus management specification.
  */
 struct fw_cdev_initiate_bus_reset {
-	__u32 type;	/* FW_CDEV_SHORT_RESET or FW_CDEV_LONG_RESET */
+	__u32 type;
 };
 
 /**
@@ -408,9 +624,10 @@ struct fw_cdev_initiate_bus_reset {
  *
  * @immediate, @key, and @data array elements are CPU-endian quadlets.
  *
- * If successful, the kernel adds the descriptor and writes back a handle to the
- * kernel-side object to be used for later removal of the descriptor block and
- * immediate key.
+ * If successful, the kernel adds the descriptor and writes back a @handle to
+ * the kernel-side object to be used for later removal of the descriptor block
+ * and immediate key.  The kernel will also generate a bus reset to signal the
+ * change of the configuration ROM to other nodes.
  *
  * This ioctl affects the configuration ROMs of all local nodes.
  * The ioctl only succeeds on device files which represent a local node.
@@ -429,38 +646,50 @@ struct fw_cdev_add_descriptor {
  *		descriptor was added
  *
  * Remove a descriptor block and accompanying immediate key from the local
- * nodes' configuration ROMs.
+ * nodes' configuration ROMs.  The kernel will also generate a bus reset to
+ * signal the change of the configuration ROM to other nodes.
  */
 struct fw_cdev_remove_descriptor {
 	__u32 handle;
 };
 
-#define FW_CDEV_ISO_CONTEXT_TRANSMIT	0
-#define FW_CDEV_ISO_CONTEXT_RECEIVE	1
+#define FW_CDEV_ISO_CONTEXT_TRANSMIT			0
+#define FW_CDEV_ISO_CONTEXT_RECEIVE			1
+#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2 /* added in 2.6.36 */
 
 /**
- * struct fw_cdev_create_iso_context - Create a context for isochronous IO
- * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE
- * @header_size: Header size to strip for receive contexts
- * @channel:	Channel to bind to
- * @speed:	Speed for transmit contexts
- * @closure:	To be returned in &fw_cdev_event_iso_interrupt
+ * struct fw_cdev_create_iso_context - Create a context for isochronous I/O
+ * @type:	%FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
+ *		%FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
+ * @header_size: Header size to strip in single-channel reception
+ * @channel:	Channel to bind to in single-channel reception or transmission
+ * @speed:	Transmission speed
+ * @closure:	To be returned in &fw_cdev_event_iso_interrupt or
+ *		&fw_cdev_event_iso_interrupt_multichannel
  * @handle:	Handle to context, written back by kernel
  *
  * Prior to sending or receiving isochronous I/O, a context must be created.
  * The context records information about the transmit or receive configuration
  * and typically maps to an underlying hardware resource.  A context is set up
  * for either sending or receiving.  It is bound to a specific isochronous
- * channel.
+ * @channel.
+ *
+ * In case of multichannel reception, @header_size and @channel are ignored
+ * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
+ *
+ * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
+ * and must be a multiple of 4.  It is ignored in other context types.
+ *
+ * @speed is ignored in receive context types.
  *
  * If a context was successfully created, the kernel writes back a handle to the
  * context, which must be passed in for subsequent operations on that context.
  *
- * For receive contexts, @header_size must be at least 4 and must be a multiple
- * of 4.
- *
- * Note that the effect of a @header_size > 4 depends on
- * &fw_cdev_get_info.version, as documented at &fw_cdev_event_iso_interrupt.
+ * Limitations:
+ * No more than one iso context can be created per fd.
+ * The total number of contexts that all userspace and kernelspace drivers can
+ * create on a card at a time is a hardware limit, typically 4 or 8 contexts per
+ * direction, and of them at most one multichannel receive context.
  */
 struct fw_cdev_create_iso_context {
 	__u32 type;
@@ -471,6 +700,22 @@ struct fw_cdev_create_iso_context {
 	__u32 handle;
 };
 
+/**
+ * struct fw_cdev_set_iso_channels - Select channels in multichannel reception
+ * @channels:	Bitmask of channels to listen to
+ * @handle:	Handle of the mutichannel receive context
+ *
+ * @channels is the bitwise or of 1ULL << n for each channel n to listen to.
+ *
+ * The ioctl fails with errno %EBUSY if there is already another receive context
+ * on a channel in @channels.  In that case, the bitmask of all unoccupied
+ * channels is returned in @channels.
+ */
+struct fw_cdev_set_iso_channels {
+	__u64 channels;
+	__u32 handle;
+};
+
 #define FW_CDEV_ISO_PAYLOAD_LENGTH(v)	(v)
 #define FW_CDEV_ISO_INTERRUPT		(1 << 16)
 #define FW_CDEV_ISO_SKIP		(1 << 17)
@@ -481,42 +726,72 @@ struct fw_cdev_create_iso_context {
 
 /**
  * struct fw_cdev_iso_packet - Isochronous packet
- * @control:	Contains the header length (8 uppermost bits), the sy field
- *		(4 bits), the tag field (2 bits), a sync flag (1 bit),
- *		a skip flag (1 bit), an interrupt flag (1 bit), and the
+ * @control:	Contains the header length (8 uppermost bits),
+ *		the sy field (4 bits), the tag field (2 bits), a sync flag
+ *		or a skip flag (1 bit), an interrupt flag (1 bit), and the
  *		payload length (16 lowermost bits)
- * @header:	Header and payload
+ * @header:	Header and payload in case of a transmit context.
  *
  * &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
- *
  * Use the FW_CDEV_ISO_ macros to fill in @control.
+ * The @header array is empty in case of receive contexts.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
+ *
+ * @control.HEADER_LENGTH must be a multiple of 4.  It specifies the numbers of
+ * bytes in @header that will be prepended to the packet's payload.  These bytes
+ * are copied into the kernel and will not be accessed after the ioctl has
+ * returned.
+ *
+ * The @control.SY and TAG fields are copied to the iso packet header.  These
+ * fields are specified by IEEE 1394a and IEC 61883-1.
+ *
+ * The @control.SKIP flag specifies that no packet is to be sent in a frame.
+ * When using this, all other fields except @control.INTERRUPT must be zero.
+ *
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
+ * &fw_cdev_event_iso_interrupt event will be sent.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
+ *
+ * @control.HEADER_LENGTH must be a multiple of the context's header_size.
+ * If the HEADER_LENGTH is larger than the context's header_size, multiple
+ * packets are queued for this entry.
+ *
+ * The @control.SY and TAG fields are ignored.
+ *
+ * If the @control.SYNC flag is set, the context drops all packets until a
+ * packet with a sy field is received which matches &fw_cdev_start_iso.sync.
+ *
+ * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
+ * one packet (in addition to payload quadlets that have been defined as headers
+ * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
+ * If more bytes are received, the additional bytes are dropped.  If less bytes
+ * are received, the remaining bytes in this part of the payload buffer will not
+ * be written to, not even by the next packet.  I.e., packets received in
+ * consecutive frames will not necessarily be consecutive in memory.  If an
+ * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
+ * among them.
  *
- * For transmit packets, the header length must be a multiple of 4 and specifies
- * the numbers of bytes in @header that will be prepended to the packet's
- * payload; these bytes are copied into the kernel and will not be accessed
- * after the ioctl has returned.  The sy and tag fields are copied to the iso
- * packet header (these fields are specified by IEEE 1394a and IEC 61883-1).
- * The skip flag specifies that no packet is to be sent in a frame; when using
- * this, all other fields except the interrupt flag must be zero.
- *
- * For receive packets, the header length must be a multiple of the context's
- * header size; if the header length is larger than the context's header size,
- * multiple packets are queued for this entry.  The sy and tag fields are
- * ignored.  If the sync flag is set, the context drops all packets until
- * a packet with a matching sy field is received (the sync value to wait for is
- * specified in the &fw_cdev_start_iso structure).  The payload length defines
- * how many payload bytes can be received for one packet (in addition to payload
- * quadlets that have been defined as headers and are stripped and returned in
- * the &fw_cdev_event_iso_interrupt structure).  If more bytes are received, the
- * additional bytes are dropped.  If less bytes are received, the remaining
- * bytes in this part of the payload buffer will not be written to, not even by
- * the next packet, i.e., packets received in consecutive frames will not
- * necessarily be consecutive in memory.  If an entry has queued multiple
- * packets, the payload length is divided equally among them.
- *
- * When a packet with the interrupt flag set has been completed, the
+ * When a packet with the @control.INTERRUPT flag set has been completed, an
  * &fw_cdev_event_iso_interrupt event will be sent.  An entry that has queued
  * multiple receive packets is completed when its last packet is completed.
+ *
+ * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
+ *
+ * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
+ * it specifies a chunk of the mmap()'ed buffer, while the number and alignment
+ * of packets to be placed into the buffer chunk is not known beforehand.
+ *
+ * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
+ * for header, payload, padding, and trailer bytes of one or more packets.
+ * It must be a multiple of 4.
+ *
+ * @control.HEADER_LENGTH, TAG and SY are ignored.  SYNC is treated as described
+ * for single-channel reception.
+ *
+ * When a buffer chunk with the @control.INTERRUPT flag set has been filled
+ * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
  */
 struct fw_cdev_iso_packet {
 	__u32 control;
@@ -525,9 +800,9 @@ struct fw_cdev_iso_packet {
 
 /**
  * struct fw_cdev_queue_iso - Queue isochronous packets for I/O
- * @packets:	Userspace pointer to packet data
+ * @packets:	Userspace pointer to an array of &fw_cdev_iso_packet
  * @data:	Pointer into mmap()'ed payload buffer
- * @size:	Size of packet data in bytes
+ * @size:	Size of the @packets array, in bytes
  * @handle:	Isochronous context handle
  *
  * Queue a number of isochronous packets for reception or transmission.
@@ -540,6 +815,9 @@ struct fw_cdev_iso_packet {
  * The kernel may or may not queue all packets, but will write back updated
  * values of the @packets, @data and @size fields, so the ioctl can be
  * resubmitted easily.
+ *
+ * In case of a multichannel receive context, @data must be quadlet-aligned
+ * relative to the buffer start.
  */
 struct fw_cdev_queue_iso {
 	__u64 packets;
@@ -698,4 +976,39 @@ struct fw_cdev_send_stream_packet {
 	__u32 speed;
 };
 
+/**
+ * struct fw_cdev_send_phy_packet - send a PHY packet
+ * @closure:	Passed back to userspace in the PHY-packet-sent event
+ * @data:	First and second quadlet of the PHY packet
+ * @generation:	The bus generation where packet is valid
+ *
+ * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
+ * on the same card as this device.  After transmission, an
+ * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
+ *
+ * The payload @data[] shall be specified in host byte order.  Usually,
+ * @data[1] needs to be the bitwise inverse of @data[0].  VersaPHY packets
+ * are an exception to this rule.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_send_phy_packet {
+	__u64 closure;
+	__u32 data[2];
+	__u32 generation;
+};
+
+/**
+ * struct fw_cdev_receive_phy_packets - start reception of PHY packets
+ * @closure: Passed back to userspace in phy packet events
+ *
+ * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
+ * incoming PHY packets from any node on the same bus as the device.
+ *
+ * The ioctl is only permitted on device files which represent a local node.
+ */
+struct fw_cdev_receive_phy_packets {
+	__u64 closure;
+};
+
 #endif /* _LINUX_FIREWIRE_CDEV_H */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 72e2b8ac2a5..1cd637ef62d 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -32,11 +32,13 @@
 #define CSR_CYCLE_TIME			0x200
 #define CSR_BUS_TIME			0x204
 #define CSR_BUSY_TIMEOUT		0x210
+#define CSR_PRIORITY_BUDGET		0x218
 #define CSR_BUS_MANAGER_ID		0x21c
 #define CSR_BANDWIDTH_AVAILABLE		0x220
 #define CSR_CHANNELS_AVAILABLE		0x224
 #define CSR_CHANNELS_AVAILABLE_HI	0x224
 #define CSR_CHANNELS_AVAILABLE_LO	0x228
+#define CSR_MAINT_UTILITY		0x230
 #define CSR_BROADCAST_CHANNEL		0x234
 #define CSR_CONFIG_ROM			0x400
 #define CSR_CONFIG_ROM_END		0x800
@@ -89,6 +91,11 @@ struct fw_card {
 	struct list_head transaction_list;
 	unsigned long reset_jiffies;
 
+	u32 split_timeout_hi;
+	u32 split_timeout_lo;
+	unsigned int split_timeout_cycles;
+	unsigned int split_timeout_jiffies;
+
 	unsigned long long guid;
 	unsigned max_receive;
 	int link_speed;
@@ -104,18 +111,28 @@ struct fw_card {
 	bool beta_repeaters_present;
 
 	int index;
-
 	struct list_head link;
 
-	/* Work struct for BM duties. */
-	struct delayed_work work;
+	struct list_head phy_receiver_list;
+
+	struct delayed_work br_work; /* bus reset job */
+	bool br_short;
+
+	struct delayed_work bm_work; /* bus manager job */
 	int bm_retries;
 	int bm_generation;
 	__be32 bm_transaction_data[2];
+	int bm_node_id;
+	bool bm_abdicate;
+
+	bool priority_budget_implemented;	/* controller feature */
+	bool broadcast_channel_auto_allocated;	/* controller feature */
 
 	bool broadcast_channel_allocated;
 	u32 broadcast_channel;
 	__be32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
+
+	__be32 maint_utility_register;
 };
 
 struct fw_attribute_group {
@@ -252,7 +269,7 @@ typedef void (*fw_transaction_callback_t)(struct fw_card *card, int rcode,
 typedef void (*fw_address_callback_t)(struct fw_card *card,
 				      struct fw_request *request,
 				      int tcode, int destination, int source,
-				      int generation, int speed,
+				      int generation,
 				      unsigned long long offset,
 				      void *data, size_t length,
 				      void *callback_data);
@@ -269,10 +286,10 @@ struct fw_packet {
 	u32 timestamp;
 
 	/*
-	 * This callback is called when the packet transmission has
-	 * completed; for successful transmission, the status code is
-	 * the ack received from the destination, otherwise it's a
-	 * negative errno: ENOMEM, ESTALE, ETIMEDOUT, ENODEV, EIO.
+	 * This callback is called when the packet transmission has completed.
+	 * For successful transmission, the status code is the ack received
+	 * from the destination.  Otherwise it is one of the juju-specific
+	 * rcodes:  RCODE_SEND_ERROR, _CANCELLED, _BUSY, _GENERATION, _NO_ACK.
 	 * The callback can be called from tasklet context and thus
 	 * must never block.
 	 */
@@ -355,17 +372,19 @@ void fw_core_remove_descriptor(struct fw_descriptor *desc);
  * scatter-gather streaming (e.g. assembling video frame automatically).
  */
 struct fw_iso_packet {
-	u16 payload_length;	/* Length of indirect payload. */
-	u32 interrupt:1;	/* Generate interrupt on this packet */
-	u32 skip:1;		/* Set to not send packet at all. */
-	u32 tag:2;
-	u32 sy:4;
-	u32 header_length:8;	/* Length of immediate header. */
-	u32 header[0];
+	u16 payload_length;	/* Length of indirect payload		*/
+	u32 interrupt:1;	/* Generate interrupt on this packet	*/
+	u32 skip:1;		/* tx: Set to not send packet at all	*/
+				/* rx: Sync bit, wait for matching sy	*/
+	u32 tag:2;		/* tx: Tag in packet header		*/
+	u32 sy:4;		/* tx: Sy in packet header		*/
+	u32 header_length:8;	/* Length of immediate header		*/
+	u32 header[0];		/* tx: Top of 1394 isoch. data_block	*/
 };
 
-#define FW_ISO_CONTEXT_TRANSMIT	0
-#define FW_ISO_CONTEXT_RECEIVE	1
+#define FW_ISO_CONTEXT_TRANSMIT			0
+#define FW_ISO_CONTEXT_RECEIVE			1
+#define FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL	2
 
 #define FW_ISO_CONTEXT_MATCH_TAG0	 1
 #define FW_ISO_CONTEXT_MATCH_TAG1	 2
@@ -389,24 +408,31 @@ struct fw_iso_buffer {
 int fw_iso_buffer_init(struct fw_iso_buffer *buffer, struct fw_card *card,
 		       int page_count, enum dma_data_direction direction);
 void fw_iso_buffer_destroy(struct fw_iso_buffer *buffer, struct fw_card *card);
+size_t fw_iso_buffer_lookup(struct fw_iso_buffer *buffer, dma_addr_t completed);
 
 struct fw_iso_context;
 typedef void (*fw_iso_callback_t)(struct fw_iso_context *context,
 				  u32 cycle, size_t header_length,
 				  void *header, void *data);
+typedef void (*fw_iso_mc_callback_t)(struct fw_iso_context *context,
+				     dma_addr_t completed, void *data);
 struct fw_iso_context {
 	struct fw_card *card;
 	int type;
 	int channel;
 	int speed;
 	size_t header_size;
-	fw_iso_callback_t callback;
+	union {
+		fw_iso_callback_t sc;
+		fw_iso_mc_callback_t mc;
+	} callback;
 	void *callback_data;
 };
 
 struct fw_iso_context *fw_iso_context_create(struct fw_card *card,
 		int type, int channel, int speed, size_t header_size,
 		fw_iso_callback_t callback, void *callback_data);
+int fw_iso_context_set_channels(struct fw_iso_context *ctx, u64 *channels);
 int fw_iso_context_queue(struct fw_iso_context *ctx,
 			 struct fw_iso_packet *packet,
 			 struct fw_iso_buffer *buffer,
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
index 1d747f72298..631b77f2ac7 100644
--- a/include/linux/flex_array.h
+++ b/include/linux/flex_array.h
@@ -70,4 +70,9 @@ int flex_array_clear(struct flex_array *fa, unsigned int element_nr);
 void *flex_array_get(struct flex_array *fa, unsigned int element_nr);
 int flex_array_shrink(struct flex_array *fa);
 
+#define flex_array_put_ptr(fa, nr, src, gfp) \
+	flex_array_put(fa, nr, &(void *)(src), gfp)
+
+void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr);
+
 #endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index e5106e49bd2..488efec09d1 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -687,6 +687,7 @@ struct block_device {
  */
 #define PAGECACHE_TAG_DIRTY	0
 #define PAGECACHE_TAG_WRITEBACK	1
+#define PAGECACHE_TAG_TOWRITE	2
 
 int mapping_tagged(struct address_space *mapping, int tag);
 
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index c57db27ac86..b8581c09d19 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -20,7 +20,7 @@
 
 #include <linux/fscache.h>
 #include <linux/sched.h>
-#include <linux/slow-work.h>
+#include <linux/workqueue.h>
 
 #define NR_MAXCACHES BITS_PER_LONG
 
@@ -76,18 +76,14 @@ typedef void (*fscache_operation_release_t)(struct fscache_operation *op);
 typedef void (*fscache_operation_processor_t)(struct fscache_operation *op);
 
 struct fscache_operation {
-	union {
-		struct work_struct fast_work;	/* record for fast ops */
-		struct slow_work slow_work;	/* record for (very) slow ops */
-	};
+	struct work_struct	work;		/* record for async ops */
 	struct list_head	pend_link;	/* link in object->pending_ops */
 	struct fscache_object	*object;	/* object to be operated upon */
 
 	unsigned long		flags;
 #define FSCACHE_OP_TYPE		0x000f	/* operation type */
-#define FSCACHE_OP_FAST		0x0001	/* - fast op, processor may not sleep for disk */
-#define FSCACHE_OP_SLOW		0x0002	/* - (very) slow op, processor may sleep for disk */
-#define FSCACHE_OP_MYTHREAD	0x0003	/* - processing is done be issuing thread, not pool */
+#define FSCACHE_OP_ASYNC	0x0001	/* - async op, processor may sleep for disk */
+#define FSCACHE_OP_MYTHREAD	0x0002	/* - processing is done be issuing thread, not pool */
 #define FSCACHE_OP_WAITING	4	/* cleared when op is woken */
 #define FSCACHE_OP_EXCLUSIVE	5	/* exclusive op, other ops must wait */
 #define FSCACHE_OP_DEAD		6	/* op is now dead */
@@ -105,7 +101,8 @@ struct fscache_operation {
 	/* operation releaser */
 	fscache_operation_release_t release;
 
-#ifdef CONFIG_SLOW_WORK_DEBUG
+#ifdef CONFIG_WORKQUEUE_DEBUGFS
+	struct work_struct put_work;	/* work to delay operation put */
 	const char *name;		/* operation name */
 	const char *state;		/* operation state */
 #define fscache_set_op_name(OP, N)	do { (OP)->name  = (N); } while(0)
@@ -117,7 +114,7 @@ struct fscache_operation {
 };
 
 extern atomic_t fscache_op_debug_id;
-extern const struct slow_work_ops fscache_op_slow_work_ops;
+extern void fscache_op_work_func(struct work_struct *work);
 
 extern void fscache_enqueue_operation(struct fscache_operation *);
 extern void fscache_put_operation(struct fscache_operation *);
@@ -128,33 +125,21 @@ extern void fscache_put_operation(struct fscache_operation *);
  * @release: The release function to assign
  *
  * Do basic initialisation of an operation.  The caller must still set flags,
- * object, either fast_work or slow_work if necessary, and processor if needed.
+ * object and processor if needed.
  */
 static inline void fscache_operation_init(struct fscache_operation *op,
-					  fscache_operation_release_t release)
+					fscache_operation_processor_t processor,
+					fscache_operation_release_t release)
 {
+	INIT_WORK(&op->work, fscache_op_work_func);
 	atomic_set(&op->usage, 1);
 	op->debug_id = atomic_inc_return(&fscache_op_debug_id);
+	op->processor = processor;
 	op->release = release;
 	INIT_LIST_HEAD(&op->pend_link);
 	fscache_set_op_state(op, "Init");
 }
 
-/**
- * fscache_operation_init_slow - Do additional initialisation of a slow op
- * @op: The operation to initialise
- * @processor: The processor function to assign
- *
- * Do additional initialisation of an operation as required for slow work.
- */
-static inline
-void fscache_operation_init_slow(struct fscache_operation *op,
-				 fscache_operation_processor_t processor)
-{
-	op->processor = processor;
-	slow_work_init(&op->slow_work, &fscache_op_slow_work_ops);
-}
-
 /*
  * data read operation
  */
@@ -389,7 +374,7 @@ struct fscache_object {
 	struct fscache_cache	*cache;		/* cache that supplied this object */
 	struct fscache_cookie	*cookie;	/* netfs's file/index object */
 	struct fscache_object	*parent;	/* parent object */
-	struct slow_work	work;		/* attention scheduling record */
+	struct work_struct	work;		/* attention scheduling record */
 	struct list_head	dependents;	/* FIFO of dependent objects */
 	struct list_head	dep_link;	/* link in parent's dependents list */
 	struct list_head	pending_ops;	/* unstarted operations on this object */
@@ -411,7 +396,7 @@ extern const char *fscache_object_states[];
 	(test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&	\
 	 (obj)->state >= FSCACHE_OBJECT_DYING)
 
-extern const struct slow_work_ops fscache_object_slow_work_ops;
+extern void fscache_object_work_func(struct work_struct *work);
 
 /**
  * fscache_object_init - Initialise a cache object description
@@ -433,7 +418,7 @@ void fscache_object_init(struct fscache_object *object,
 	spin_lock_init(&object->lock);
 	INIT_LIST_HEAD(&object->cache_link);
 	INIT_HLIST_NODE(&object->cookie_link);
-	vslow_work_init(&object->work, &fscache_object_slow_work_ops);
+	INIT_WORK(&object->work, fscache_object_work_func);
 	INIT_LIST_HEAD(&object->dependents);
 	INIT_LIST_HEAD(&object->dep_link);
 	INIT_LIST_HEAD(&object->pending_ops);
@@ -534,6 +519,8 @@ extern void fscache_io_error(struct fscache_cache *cache);
 extern void fscache_mark_pages_cached(struct fscache_retrieval *op,
 				      struct pagevec *pagevec);
 
+extern bool fscache_object_sleep_till_congested(signed long *timeoutp);
+
 extern enum fscache_checkaux fscache_check_aux(struct fscache_object *object,
 					       const void *data,
 					       uint16_t datalen);
diff --git a/drivers/video/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index fc295d7ea46..fc295d7ea46 100644
--- a/drivers/video/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 41e46330d9b..dcd6a7c3a43 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -1,3 +1,8 @@
+/*
+ * Ftrace header.  For implementation details beyond the random comments
+ * scattered below, see: Documentation/trace/ftrace-design.txt
+ */
+
 #ifndef _LINUX_FTRACE_H
 #define _LINUX_FTRACE_H
 
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 3167f2df412..02b8b24f8f5 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -11,8 +11,6 @@ struct trace_array;
 struct tracer;
 struct dentry;
 
-DECLARE_PER_CPU(struct trace_seq, ftrace_event_seq);
-
 struct trace_print_flags {
 	unsigned long		mask;
 	const char		*name;
@@ -58,6 +56,9 @@ struct trace_iterator {
 	struct ring_buffer_iter	*buffer_iter[NR_CPUS];
 	unsigned long		iter_flags;
 
+	/* trace_seq for __print_flags() and __print_symbolic() etc. */
+	struct trace_seq	tmp_seq;
+
 	/* The below is zeroed out in pipe_read */
 	struct trace_seq	seq;
 	struct trace_entry	*ent;
@@ -146,14 +147,19 @@ struct ftrace_event_class {
 	int			(*raw_init)(struct ftrace_event_call *);
 };
 
+extern int ftrace_event_reg(struct ftrace_event_call *event,
+			    enum trace_reg type);
+
 enum {
 	TRACE_EVENT_FL_ENABLED_BIT,
 	TRACE_EVENT_FL_FILTERED_BIT,
+	TRACE_EVENT_FL_RECORDED_CMD_BIT,
 };
 
 enum {
-	TRACE_EVENT_FL_ENABLED	= (1 << TRACE_EVENT_FL_ENABLED_BIT),
-	TRACE_EVENT_FL_FILTERED	= (1 << TRACE_EVENT_FL_FILTERED_BIT),
+	TRACE_EVENT_FL_ENABLED		= (1 << TRACE_EVENT_FL_ENABLED_BIT),
+	TRACE_EVENT_FL_FILTERED		= (1 << TRACE_EVENT_FL_FILTERED_BIT),
+	TRACE_EVENT_FL_RECORDED_CMD	= (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
 };
 
 struct ftrace_event_call {
@@ -171,6 +177,7 @@ struct ftrace_event_call {
 	 * 32 bit flags:
 	 *   bit 1:		enabled
 	 *   bit 2:		filter_active
+	 *   bit 3:		enabled cmd record
 	 *
 	 * Changes to flags must hold the event_mutex.
 	 *
@@ -257,8 +264,7 @@ static inline void
 perf_trace_buf_submit(void *raw_data, int size, int rctx, u64 addr,
 		       u64 count, struct pt_regs *regs, void *head)
 {
-	perf_tp_event(addr, count, raw_data, size, regs, head);
-	perf_swevent_put_recursion_context(rctx);
+	perf_tp_event(addr, count, raw_data, size, regs, head, rctx);
 }
 #endif
 
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 88e0eb59691..c3c578e0983 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -37,6 +37,10 @@
  *
  * 7.14
  *  - add splice support to fuse device
+ *
+ * 7.15
+ *  - add store notify
+ *  - add retrieve notify
  */
 
 #ifndef _LINUX_FUSE_H
@@ -68,7 +72,7 @@
 #define FUSE_KERNEL_VERSION 7
 
 /** Minor version number of this interface */
-#define FUSE_KERNEL_MINOR_VERSION 14
+#define FUSE_KERNEL_MINOR_VERSION 15
 
 /** The node ID of the root inode */
 #define FUSE_ROOT_ID 1
@@ -251,6 +255,7 @@ enum fuse_opcode {
 	FUSE_DESTROY       = 38,
 	FUSE_IOCTL         = 39,
 	FUSE_POLL          = 40,
+	FUSE_NOTIFY_REPLY  = 41,
 
 	/* CUSE specific operations */
 	CUSE_INIT          = 4096,
@@ -260,6 +265,8 @@ enum fuse_notify_code {
 	FUSE_NOTIFY_POLL   = 1,
 	FUSE_NOTIFY_INVAL_INODE = 2,
 	FUSE_NOTIFY_INVAL_ENTRY = 3,
+	FUSE_NOTIFY_STORE = 4,
+	FUSE_NOTIFY_RETRIEVE = 5,
 	FUSE_NOTIFY_CODE_MAX,
 };
 
@@ -568,4 +575,29 @@ struct fuse_notify_inval_entry_out {
 	__u32	padding;
 };
 
+struct fuse_notify_store_out {
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_notify_retrieve_out {
+	__u64	notify_unique;
+	__u64	nodeid;
+	__u64	offset;
+	__u32	size;
+	__u32	padding;
+};
+
+/* Matches the size of fuse_write_in */
+struct fuse_notify_retrieve_in {
+	__u64	dummy1;
+	__u64	offset;
+	__u32	size;
+	__u32	dummy2;
+	__u64	dummy3;
+	__u64	dummy4;
+};
+
 #endif /* _LINUX_FUSE_H */
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index caafd0561aa..e3060ef85b6 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -2,6 +2,7 @@
 #define _LINUX_HIGHMEM_H
 
 #include <linux/fs.h>
+#include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
@@ -72,7 +73,11 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx)
 }
 #define kmap_atomic_prot(page, idx, prot)	kmap_atomic(page, idx)
 
-#define kunmap_atomic(addr, idx)	do { pagefault_enable(); } while (0)
+static inline void kunmap_atomic_notypecheck(void *addr, enum km_type idx)
+{
+	pagefault_enable();
+}
+
 #define kmap_atomic_pfn(pfn, idx)	kmap_atomic(pfn_to_page(pfn), (idx))
 #define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
 
@@ -81,6 +86,13 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx)
 
 #endif /* CONFIG_HIGHMEM */
 
+/* Prevent people trying to call kunmap_atomic() as if it were kunmap() */
+/* kunmap_atomic() should get the return value of kmap_atomic, not the page. */
+#define kunmap_atomic(addr, idx) do { \
+		BUILD_BUG_ON(__same_type((addr), struct page *)); \
+		kunmap_atomic_notypecheck((addr), (idx)); \
+	} while (0)
+
 /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
 #ifndef clear_user_highpage
 static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
new file mode 100644
index 00000000000..d9d08b6269b
--- /dev/null
+++ b/include/linux/intel_mid_dma.h
@@ -0,0 +1,86 @@
+/*
+ *  intel_mid_dma.h - Intel MID DMA Drivers
+ *
+ *  Copyright (C) 2008-10 Intel Corp
+ *  Author: Vinod Koul <vinod.koul@intel.com>
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *
+ */
+#ifndef __INTEL_MID_DMA_H__
+#define __INTEL_MID_DMA_H__
+
+#include <linux/dmaengine.h>
+
+/*DMA transaction width, src and dstn width would be same
+The DMA length must be width aligned,
+for 32 bit width the length must be 32 bit (4bytes) aligned only*/
+enum intel_mid_dma_width {
+	LNW_DMA_WIDTH_8BIT = 0x0,
+	LNW_DMA_WIDTH_16BIT = 0x1,
+	LNW_DMA_WIDTH_32BIT = 0x2,
+};
+
+/*DMA mode configurations*/
+enum intel_mid_dma_mode {
+	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
+	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
+	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
+};
+
+/*DMA handshaking*/
+enum intel_mid_dma_hs_mode {
+	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
+	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
+};
+
+/*Burst size configuration*/
+enum intel_mid_dma_msize {
+	LNW_DMA_MSIZE_1 = 0x0,
+	LNW_DMA_MSIZE_4 = 0x1,
+	LNW_DMA_MSIZE_8 = 0x2,
+	LNW_DMA_MSIZE_16 = 0x3,
+	LNW_DMA_MSIZE_32 = 0x4,
+	LNW_DMA_MSIZE_64 = 0x5,
+};
+
+/**
+ * struct intel_mid_dma_slave - DMA slave structure
+ *
+ * @dirn: DMA trf direction
+ * @src_width: tx register width
+ * @dst_width: rx register width
+ * @hs_mode: HW/SW handshaking mode
+ * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
+ * @src_msize: Source DMA burst size
+ * @dst_msize: Dst DMA burst size
+ * @device_instance: DMA peripheral device instance, we can have multiple
+ *		peripheral device connected to single DMAC
+ */
+struct intel_mid_dma_slave {
+	enum dma_data_direction		dirn;
+	enum intel_mid_dma_width	src_width; /*width of DMA src txn*/
+	enum intel_mid_dma_width	dst_width; /*width of DMA dst txn*/
+	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
+	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
+	enum intel_mid_dma_msize	src_msize; /*size if src burst*/
+	enum intel_mid_dma_msize	dst_msize; /*size of dst burst*/
+	unsigned int		device_instance; /*0, 1 for periphral instance*/
+};
+
+#endif /*__INTEL_MID_DMA_H__*/
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index c2331138ca1..a0384a4d1e6 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -53,16 +53,21 @@
  * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished.
  *                Used by threaded interrupts which need to keep the
  *                irq line disabled until the threaded handler has been run.
+ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend
+ *
  */
 #define IRQF_DISABLED		0x00000020
 #define IRQF_SAMPLE_RANDOM	0x00000040
 #define IRQF_SHARED		0x00000080
 #define IRQF_PROBE_SHARED	0x00000100
-#define IRQF_TIMER		0x00000200
+#define __IRQF_TIMER		0x00000200
 #define IRQF_PERCPU		0x00000400
 #define IRQF_NOBALANCING	0x00000800
 #define IRQF_IRQPOLL		0x00001000
 #define IRQF_ONESHOT		0x00002000
+#define IRQF_NO_SUSPEND		0x00004000
+
+#define IRQF_TIMER		(__IRQF_TIMER | IRQF_NO_SUSPEND)
 
 /*
  * Bits used by threaded handlers:
diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index 25085ddd955..e0ea40f6c51 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -79,7 +79,9 @@ io_mapping_free(struct io_mapping *mapping)
 
 /* Atomic map/unmap */
 static inline void *
-io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
+io_mapping_map_atomic_wc(struct io_mapping *mapping,
+			 unsigned long offset,
+			 int slot)
 {
 	resource_size_t phys_addr;
 	unsigned long pfn;
@@ -87,13 +89,13 @@ io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
 	BUG_ON(offset >= mapping->size);
 	phys_addr = mapping->base + offset;
 	pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
-	return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot);
+	return iomap_atomic_prot_pfn(pfn, slot, mapping->prot);
 }
 
 static inline void
-io_mapping_unmap_atomic(void *vaddr)
+io_mapping_unmap_atomic(void *vaddr, int slot)
 {
-	iounmap_atomic(vaddr, KM_USER0);
+	iounmap_atomic(vaddr, slot);
 }
 
 static inline void *
@@ -133,13 +135,15 @@ io_mapping_free(struct io_mapping *mapping)
 
 /* Atomic map/unmap */
 static inline void *
-io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
+io_mapping_map_atomic_wc(struct io_mapping *mapping,
+			 unsigned long offset,
+			 int slot)
 {
 	return ((char *) mapping) + offset;
 }
 
 static inline void
-io_mapping_unmap_atomic(void *vaddr)
+io_mapping_unmap_atomic(void *vaddr, int slot)
 {
 }
 
diff --git a/include/linux/io.h b/include/linux/io.h
index 6c7f0ba0d5f..7fd2d2138bf 100644
--- a/include/linux/io.h
+++ b/include/linux/io.h
@@ -29,10 +29,10 @@ void __iowrite64_copy(void __iomem *to, const void *from, size_t count);
 
 #ifdef CONFIG_MMU
 int ioremap_page_range(unsigned long addr, unsigned long end,
-		       unsigned long phys_addr, pgprot_t prot);
+		       phys_addr_t phys_addr, pgprot_t prot);
 #else
 static inline int ioremap_page_range(unsigned long addr, unsigned long end,
-				     unsigned long phys_addr, pgprot_t prot)
+				     phys_addr_t phys_addr, pgprot_t prot)
 {
 	return 0;
 }
diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h
index 64d1b638745..86bdeffe43a 100644
--- a/include/linux/iommu-helper.h
+++ b/include/linux/iommu-helper.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_IOMMU_HELPER_H
 #define _LINUX_IOMMU_HELPER_H
 
+#include <linux/kernel.h>
+
 static inline unsigned long iommu_device_max_index(unsigned long size,
 						   unsigned long offset,
 						   u64 dma_mask)
@@ -20,7 +22,13 @@ extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
 				      unsigned long boundary_size,
 				      unsigned long align_mask);
 
-extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len,
-				     unsigned long io_page_size);
+static inline unsigned long iommu_num_pages(unsigned long addr,
+					    unsigned long len,
+					    unsigned long io_page_size)
+{
+	unsigned long size = (addr & (io_page_size - 1)) + len;
+
+	return DIV_ROUND_UP(size, io_page_size);
+}
 
 #endif
diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index be22ad83689..0a2ba409899 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -30,6 +30,7 @@ struct iommu_domain {
 };
 
 #define IOMMU_CAP_CACHE_COHERENCY	0x1
+#define IOMMU_CAP_INTR_REMAP		0x2	/* isolates device intrs */
 
 struct iommu_ops {
 	int (*domain_init)(struct iommu_domain *domain);
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index adf832dec3f..0b52924a0cb 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -601,13 +601,13 @@ struct transaction_s
 	 * Number of outstanding updates running on this transaction
 	 * [t_handle_lock]
 	 */
-	int			t_updates;
+	atomic_t		t_updates;
 
 	/*
 	 * Number of buffers reserved for use by all handles in this transaction
 	 * handle but not yet modified. [t_handle_lock]
 	 */
-	int			t_outstanding_credits;
+	atomic_t		t_outstanding_credits;
 
 	/*
 	 * Forward and backward links for the circular list of all transactions
@@ -629,7 +629,7 @@ struct transaction_s
 	/*
 	 * How many handles used this transaction? [t_handle_lock]
 	 */
-	int t_handle_count;
+	atomic_t		t_handle_count;
 
 	/*
 	 * This transaction is being forced and some process is
@@ -764,7 +764,7 @@ struct journal_s
 	/*
 	 * Protect the various scalars in the journal
 	 */
-	spinlock_t		j_state_lock;
+	rwlock_t		j_state_lock;
 
 	/*
 	 * Number of processes waiting to create a barrier lock [j_state_lock]
@@ -1082,7 +1082,9 @@ static inline handle_t *journal_current_handle(void)
  */
 
 extern handle_t *jbd2_journal_start(journal_t *, int nblocks);
-extern int	 jbd2_journal_restart (handle_t *, int nblocks);
+extern handle_t *jbd2__journal_start(journal_t *, int nblocks, int gfp_mask);
+extern int	 jbd2_journal_restart(handle_t *, int nblocks);
+extern int	 jbd2__journal_restart(handle_t *, int nblocks, int gfp_mask);
 extern int	 jbd2_journal_extend (handle_t *, int nblocks);
 extern int	 jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
 extern int	 jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
@@ -1257,8 +1259,8 @@ static inline int jbd_space_needed(journal_t *journal)
 {
 	int nblocks = journal->j_max_transaction_buffers;
 	if (journal->j_committing_transaction)
-		nblocks += journal->j_committing_transaction->
-					t_outstanding_credits;
+		nblocks += atomic_read(&journal->j_committing_transaction->
+				       t_outstanding_credits);
 	return nblocks;
 }
 
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index ccb2b3ec0fe..ea6e5244ed3 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -114,4 +114,8 @@ enum {
 	KDB_INIT_EARLY,
 	KDB_INIT_FULL,
 };
+
+extern int kdbgetintenv(const char *, int *);
+extern int kdb_set(int, const char **);
+
 #endif	/* !_KDB_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 5de838b0fc1..5b57236dfbd 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -252,6 +252,13 @@ extern struct pid *session_of_pgrp(struct pid *pgrp);
 #define FW_WARN		"[Firmware Warn]: "
 #define FW_INFO		"[Firmware Info]: "
 
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
 #ifdef CONFIG_PRINTK
 asmlinkage int vprintk(const char *fmt, va_list args)
 	__attribute__ ((format (printf, 1, 0)));
@@ -513,9 +520,6 @@ extern void tracing_start(void);
 extern void tracing_stop(void);
 extern void ftrace_off_permanent(void);
 
-extern void
-ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
-
 static inline void __attribute__ ((format (printf, 1, 2)))
 ____trace_printk_check_format(const char *fmt, ...)
 {
@@ -591,8 +595,6 @@ __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
 
 extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode);
 #else
-static inline void
-ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
 static inline int
 trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));
 
@@ -614,17 +616,6 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { }
 #endif /* CONFIG_TRACING */
 
 /*
- *      Display an IP address in readable format.
- */
-
-#define NIPQUAD(addr) \
-	((unsigned char *)&addr)[0], \
-	((unsigned char *)&addr)[1], \
-	((unsigned char *)&addr)[2], \
-	((unsigned char *)&addr)[3]
-#define NIPQUAD_FMT "%u.%u.%u.%u"
-
-/*
  * min()/max()/clamp() macros that also do
  * strict type-checking.. See the
  * "unnecessary" pointer comparison.
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index 9340f34d1bb..cc96f0f23e0 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -90,6 +90,19 @@ struct kgdb_bkpt {
 	enum kgdb_bpstate	state;
 };
 
+struct dbg_reg_def_t {
+	char *name;
+	int size;
+	int offset;
+};
+
+#ifndef DBG_MAX_REG_NUM
+#define DBG_MAX_REG_NUM 0
+#else
+extern struct dbg_reg_def_t dbg_reg_def[];
+extern char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs);
+extern int dbg_set_reg(int regno, void *mem, struct pt_regs *regs);
+#endif
 #ifndef KGDB_MAX_BREAKPOINTS
 # define KGDB_MAX_BREAKPOINTS	1000
 #endif
@@ -281,7 +294,7 @@ extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
 extern struct kgdb_io *dbg_io_ops;
 
 extern int kgdb_hex2long(char **ptr, unsigned long *long_val);
-extern int kgdb_mem2hex(char *mem, char *buf, int count);
+extern char *kgdb_mem2hex(char *mem, char *buf, int count);
 extern int kgdb_hex2mem(char *buf, char *mem, int count);
 
 extern int kgdb_isremovedbreak(unsigned long addr);
diff --git a/include/linux/kmemtrace.h b/include/linux/kmemtrace.h
deleted file mode 100644
index b616d3930c3..00000000000
--- a/include/linux/kmemtrace.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2008 Eduard - Gabriel Munteanu
- *
- * This file is released under GPL version 2.
- */
-
-#ifndef _LINUX_KMEMTRACE_H
-#define _LINUX_KMEMTRACE_H
-
-#ifdef __KERNEL__
-
-#include <trace/events/kmem.h>
-
-#ifdef CONFIG_KMEMTRACE
-extern void kmemtrace_init(void);
-#else
-static inline void kmemtrace_init(void)
-{
-}
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_KMEMTRACE_H */
-
diff --git a/include/linux/ksm.h b/include/linux/ksm.h
index 43bdab769fc..74d691ee912 100644
--- a/include/linux/ksm.h
+++ b/include/linux/ksm.h
@@ -78,7 +78,7 @@ static inline struct page *ksm_might_need_to_copy(struct page *page,
 	struct anon_vma *anon_vma = page_anon_vma(page);
 
 	if (!anon_vma ||
-	    (anon_vma == vma->anon_vma &&
+	    (anon_vma->root == vma->anon_vma->root &&
 	     page->index == linear_page_index(vma, address)))
 		return page;
 
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index aabc8a13ba7..685ea65eb80 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -30,8 +30,73 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
 void kthread_bind(struct task_struct *k, unsigned int cpu);
 int kthread_stop(struct task_struct *k);
 int kthread_should_stop(void);
+void *kthread_data(struct task_struct *k);
 
 int kthreadd(void *unused);
 extern struct task_struct *kthreadd_task;
 
+/*
+ * Simple work processor based on kthread.
+ *
+ * This provides easier way to make use of kthreads.  A kthread_work
+ * can be queued and flushed using queue/flush_kthread_work()
+ * respectively.  Queued kthread_works are processed by a kthread
+ * running kthread_worker_fn().
+ *
+ * A kthread_work can't be freed while it is executing.
+ */
+struct kthread_work;
+typedef void (*kthread_work_func_t)(struct kthread_work *work);
+
+struct kthread_worker {
+	spinlock_t		lock;
+	struct list_head	work_list;
+	struct task_struct	*task;
+};
+
+struct kthread_work {
+	struct list_head	node;
+	kthread_work_func_t	func;
+	wait_queue_head_t	done;
+	atomic_t		flushing;
+	int			queue_seq;
+	int			done_seq;
+};
+
+#define KTHREAD_WORKER_INIT(worker)	{				\
+	.lock = SPIN_LOCK_UNLOCKED,					\
+	.work_list = LIST_HEAD_INIT((worker).work_list),		\
+	}
+
+#define KTHREAD_WORK_INIT(work, fn)	{				\
+	.node = LIST_HEAD_INIT((work).node),				\
+	.func = (fn),							\
+	.done = __WAIT_QUEUE_HEAD_INITIALIZER((work).done),		\
+	.flushing = ATOMIC_INIT(0),					\
+	}
+
+#define DEFINE_KTHREAD_WORKER(worker)					\
+	struct kthread_worker worker = KTHREAD_WORKER_INIT(worker)
+
+#define DEFINE_KTHREAD_WORK(work, fn)					\
+	struct kthread_work work = KTHREAD_WORK_INIT(work, fn)
+
+static inline void init_kthread_worker(struct kthread_worker *worker)
+{
+	*worker = (struct kthread_worker)KTHREAD_WORKER_INIT(*worker);
+}
+
+static inline void init_kthread_work(struct kthread_work *work,
+				     kthread_work_func_t fn)
+{
+	*work = (struct kthread_work)KTHREAD_WORK_INIT(*work, fn);
+}
+
+int kthread_worker_fn(void *worker_ptr);
+
+bool queue_kthread_work(struct kthread_worker *worker,
+			struct kthread_work *work);
+void flush_kthread_work(struct kthread_work *work);
+void flush_kthread_worker(struct kthread_worker *worker);
+
 #endif /* _LINUX_KTHREAD_H */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b85f3ff34d7..f010f18a0f8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -751,6 +751,7 @@ struct ata_port {
 	struct ata_host		*host;
 	struct device 		*dev;
 
+	struct mutex		scsi_scan_mutex;
 	struct delayed_work	hotplug_task;
 	struct work_struct	scsi_rescan_task;
 
diff --git a/include/linux/list.h b/include/linux/list.h
index 5d57a3a1fa1..d167b5d7c0a 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -1,6 +1,7 @@
 #ifndef _LINUX_LIST_H
 #define _LINUX_LIST_H
 
+#include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/poison.h>
 #include <linux/prefetch.h>
@@ -16,10 +17,6 @@
  * using the generic single-entry routines.
  */
 
-struct list_head {
-	struct list_head *next, *prev;
-};
-
 #define LIST_HEAD_INIT(name) { &(name), &(name) }
 
 #define LIST_HEAD(name) \
@@ -566,14 +563,6 @@ static inline void list_splice_tail_init(struct list_head *list,
  * You lose the ability to access the tail in O(1).
  */
 
-struct hlist_head {
-	struct hlist_node *first;
-};
-
-struct hlist_node {
-	struct hlist_node *next, **pprev;
-};
-
 #define HLIST_HEAD_INIT { .first = NULL }
 #define HLIST_HEAD(name) struct hlist_head name = {  .first = NULL }
 #define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 9411d32840b..73564cac38c 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -98,11 +98,6 @@ extern void mem_cgroup_end_migration(struct mem_cgroup *mem,
 /*
  * For memory reclaim.
  */
-extern int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem);
-extern void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
-							int priority);
-extern void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
-							int priority);
 int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
 int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
 unsigned long mem_cgroup_zone_nr_pages(struct mem_cgroup *memcg,
@@ -130,6 +125,8 @@ void mem_cgroup_update_file_mapped(struct page *page, int val);
 unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 						gfp_t gfp_mask, int nid,
 						int zid);
+u64 mem_cgroup_get_limit(struct mem_cgroup *mem);
+
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct mem_cgroup;
 
@@ -309,6 +306,12 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
 	return 0;
 }
 
+static inline
+u64 mem_cgroup_get_limit(struct mem_cgroup *mem)
+{
+	return 0;
+}
+
 #endif /* CONFIG_CGROUP_MEM_CONT */
 
 #endif /* _LINUX_MEMCONTROL_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 7b9ef6bf45a..31ac26ca4ac 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -210,6 +210,8 @@ extern struct zonelist *huge_zonelist(struct vm_area_struct *vma,
 				unsigned long addr, gfp_t gfp_flags,
 				struct mempolicy **mpol, nodemask_t **nodemask);
 extern bool init_nodemask_of_mempolicy(nodemask_t *mask);
+extern bool mempolicy_nodemask_intersects(struct task_struct *tsk,
+				const nodemask_t *mask);
 extern unsigned slab_node(struct mempolicy *policy);
 
 extern enum zone_type policy_zone;
@@ -338,7 +340,16 @@ static inline struct zonelist *huge_zonelist(struct vm_area_struct *vma,
 	return node_zonelist(0, gfp_flags);
 }
 
-static inline bool init_nodemask_of_mempolicy(nodemask_t *m) { return false; }
+static inline bool init_nodemask_of_mempolicy(nodemask_t *m)
+{
+	return false;
+}
+
+static inline bool mempolicy_nodemask_intersects(struct task_struct *tsk,
+			const nodemask_t *mask)
+{
+	return false;
+}
 
 static inline int do_migrate_pages(struct mm_struct *mm,
 			const nodemask_t *from_nodes,
diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h
index ee24ef8ab61..c04ecfe03f7 100644
--- a/include/linux/mmdebug.h
+++ b/include/linux/mmdebug.h
@@ -4,7 +4,7 @@
 #ifdef CONFIG_DEBUG_VM
 #define VM_BUG_ON(cond) BUG_ON(cond)
 #else
-#define VM_BUG_ON(cond) do { } while (0)
+#define VM_BUG_ON(cond) do { (void)(cond); } while (0)
 #endif
 
 #ifdef CONFIG_DEBUG_VIRTUAL
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b4d109e389b..6e6e62648a4 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -348,21 +348,6 @@ struct zone {
 	atomic_long_t		vm_stat[NR_VM_ZONE_STAT_ITEMS];
 
 	/*
-	 * prev_priority holds the scanning priority for this zone.  It is
-	 * defined as the scanning priority at which we achieved our reclaim
-	 * target at the previous try_to_free_pages() or balance_pgdat()
-	 * invocation.
-	 *
-	 * We use prev_priority as a measure of how much stress page reclaim is
-	 * under - it drives the swappiness decision: whether to unmap mapped
-	 * pages.
-	 *
-	 * Access to both this field is quite racy even on uniprocessor.  But
-	 * it is expected to average out OK.
-	 */
-	int prev_priority;
-
-	/*
 	 * The target ratio of ACTIVE_ANON to INACTIVE_ANON pages on
 	 * this zone's LRU.  Maintained by the pageout code.
 	 */
@@ -651,8 +636,6 @@ typedef struct pglist_data {
 #include <linux/memory_hotplug.h>
 
 extern struct mutex zonelists_mutex;
-void get_zone_counts(unsigned long *active, unsigned long *inactive,
-			unsigned long *free);
 void build_all_zonelists(void *data);
 void wakeup_kswapd(struct zone *zone, int order);
 int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6991ab5b24d..91b05c17185 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -14,8 +14,10 @@ struct irq_desc;
 extern void mask_msi_irq(unsigned int irq);
 extern void unmask_msi_irq(unsigned int irq);
 extern void read_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
+extern void get_cached_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
 extern void write_msi_msg_desc(struct irq_desc *desc, struct msi_msg *msg);
 extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
+extern void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
 extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
 
 struct msi_desc {
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index 9b8299af374..07e40c62597 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -523,6 +523,7 @@ enum {
 	NFSPROC4_CLNT_GETACL,
 	NFSPROC4_CLNT_SETACL,
 	NFSPROC4_CLNT_FS_LOCATIONS,
+	NFSPROC4_CLNT_RELEASE_LOCKOWNER,
 
 	/* nfs41 */
 	NFSPROC4_CLNT_EXCHANGE_ID,
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index bad4d121b16..508f8cf6da3 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -72,13 +72,20 @@ struct nfs_access_entry {
 	int			mask;
 };
 
+struct nfs_lock_context {
+	atomic_t count;
+	struct list_head list;
+	struct nfs_open_context *open_context;
+	fl_owner_t lockowner;
+	pid_t pid;
+};
+
 struct nfs4_state;
 struct nfs_open_context {
-	atomic_t count;
+	struct nfs_lock_context lock_context;
 	struct path path;
 	struct rpc_cred *cred;
 	struct nfs4_state *state;
-	fl_owner_t lockowner;
 	fmode_t mode;
 
 	unsigned long flags;
@@ -353,6 +360,8 @@ extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr);
 extern struct nfs_open_context *get_nfs_open_context(struct nfs_open_context *ctx);
 extern void put_nfs_open_context(struct nfs_open_context *ctx);
 extern struct nfs_open_context *nfs_find_open_context(struct inode *inode, struct rpc_cred *cred, fmode_t mode);
+extern struct nfs_lock_context *nfs_get_lock_context(struct nfs_open_context *ctx);
+extern void nfs_put_lock_context(struct nfs_lock_context *l_ctx);
 extern u64 nfs_compat_user_ino64(u64 fileid);
 extern void nfs_fattr_init(struct nfs_fattr *fattr);
 
diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h
index d6e10a4c06e..c82ee7cd628 100644
--- a/include/linux/nfs_fs_sb.h
+++ b/include/linux/nfs_fs_sb.h
@@ -15,6 +15,7 @@ struct nlm_host;
 struct nfs4_sequence_args;
 struct nfs4_sequence_res;
 struct nfs_server;
+struct nfs4_minor_version_ops;
 
 /*
  * The nfs_client identifies our client state to the server.
@@ -70,11 +71,7 @@ struct nfs_client {
 	 */
 	char			cl_ipaddr[48];
 	unsigned char		cl_id_uniquifier;
-	int		     (* cl_call_sync)(struct nfs_server *server,
-					      struct rpc_message *msg,
-					      struct nfs4_sequence_args *args,
-					      struct nfs4_sequence_res *res,
-					      int cache_reply);
+	const struct nfs4_minor_version_ops *cl_mvops;
 #endif /* CONFIG_NFS_V4 */
 
 #ifdef CONFIG_NFS_V4_1
diff --git a/include/linux/nfs_mount.h b/include/linux/nfs_mount.h
index 4499016e6d0..5d59ae861aa 100644
--- a/include/linux/nfs_mount.h
+++ b/include/linux/nfs_mount.h
@@ -69,5 +69,6 @@ struct nfs_mount_data {
 #define NFS_MOUNT_LOOKUP_CACHE_NONEG	0x10000
 #define NFS_MOUNT_LOOKUP_CACHE_NONE	0x20000
 #define NFS_MOUNT_NORESVPORT		0x40000
+#define NFS_MOUNT_LEGACY_INTERFACE	0x80000
 
 #endif
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index 3c60685d972..f8b60e7f4c4 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -39,6 +39,7 @@ struct nfs_page {
 	struct list_head	wb_list;	/* Defines state of page: */
 	struct page		*wb_page;	/* page to read in/write out */
 	struct nfs_open_context	*wb_context;	/* File state context info */
+	struct nfs_lock_context	*wb_lock_context;	/* lock context info */
 	atomic_t		wb_complete;	/* i/os we're waiting for */
 	pgoff_t			wb_index;	/* Offset >> PAGE_CACHE_SHIFT */
 	unsigned int		wb_offset,	/* Offset & ~PAGE_CACHE_MASK */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 51914d7d6cc..fc461926c41 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -196,8 +196,10 @@ struct nfs_openargs {
 	__u64                   clientid;
 	__u64                   id;
 	union {
-		struct iattr *  attrs;    /* UNCHECKED, GUARDED */
-		nfs4_verifier   verifier; /* EXCLUSIVE */
+		struct {
+			struct iattr *  attrs;    /* UNCHECKED, GUARDED */
+			nfs4_verifier   verifier; /* EXCLUSIVE */
+		};
 		nfs4_stateid	delegation;		/* CLAIM_DELEGATE_CUR */
 		fmode_t		delegation_type;	/* CLAIM_PREVIOUS */
 	} u;
@@ -313,6 +315,10 @@ struct nfs_lockt_res {
 	struct nfs4_sequence_res	seq_res;
 };
 
+struct nfs_release_lockowner_args {
+	struct nfs_lowner	lock_owner;
+};
+
 struct nfs4_delegreturnargs {
 	const struct nfs_fh *fhandle;
 	const nfs4_stateid *stateid;
@@ -332,6 +338,7 @@ struct nfs4_delegreturnres {
 struct nfs_readargs {
 	struct nfs_fh *		fh;
 	struct nfs_open_context *context;
+	struct nfs_lock_context *lock_context;
 	__u64			offset;
 	__u32			count;
 	unsigned int		pgbase;
@@ -352,6 +359,7 @@ struct nfs_readres {
 struct nfs_writeargs {
 	struct nfs_fh *		fh;
 	struct nfs_open_context *context;
+	struct nfs_lock_context *lock_context;
 	__u64			offset;
 	__u32			count;
 	enum nfs3_stable_how	stable;
diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h
index 8c2c6116e78..f5487b6f91e 100644
--- a/include/linux/nilfs2_fs.h
+++ b/include/linux/nilfs2_fs.h
@@ -160,7 +160,7 @@ struct nilfs_super_root {
  * struct nilfs_super_block - structure of super block on disk
  */
 struct nilfs_super_block {
-	__le32	s_rev_level;		/* Revision level */
+/*00*/	__le32	s_rev_level;		/* Revision level */
 	__le16	s_minor_rev_level;	/* minor revision level */
 	__le16	s_magic;		/* Magic signature */
 
@@ -169,50 +169,53 @@ struct nilfs_super_block {
 					   is excluded. */
 	__le16  s_flags;		/* flags */
 	__le32  s_crc_seed;		/* Seed value of CRC calculation */
-	__le32	s_sum;			/* Check sum of super block */
+/*10*/	__le32	s_sum;			/* Check sum of super block */
 
 	__le32	s_log_block_size;	/* Block size represented as follows
 					   blocksize =
 					       1 << (s_log_block_size + 10) */
 	__le64  s_nsegments;		/* Number of segments in filesystem */
-	__le64  s_dev_size;		/* block device size in bytes */
+/*20*/	__le64  s_dev_size;		/* block device size in bytes */
 	__le64	s_first_data_block;	/* 1st seg disk block number */
-	__le32  s_blocks_per_segment;   /* number of blocks per full segment */
+/*30*/	__le32  s_blocks_per_segment;   /* number of blocks per full segment */
 	__le32	s_r_segments_percentage; /* Reserved segments percentage */
 
 	__le64  s_last_cno;		/* Last checkpoint number */
-	__le64  s_last_pseg;		/* disk block addr pseg written last */
+/*40*/	__le64  s_last_pseg;		/* disk block addr pseg written last */
 	__le64  s_last_seq;             /* seq. number of seg written last */
-	__le64	s_free_blocks_count;	/* Free blocks count */
+/*50*/	__le64	s_free_blocks_count;	/* Free blocks count */
 
 	__le64	s_ctime;		/* Creation time (execution time of
 					   newfs) */
-	__le64	s_mtime;		/* Mount time */
+/*60*/	__le64	s_mtime;		/* Mount time */
 	__le64	s_wtime;		/* Write time */
-	__le16	s_mnt_count;		/* Mount count */
+/*70*/	__le16	s_mnt_count;		/* Mount count */
 	__le16	s_max_mnt_count;	/* Maximal mount count */
 	__le16	s_state;		/* File system state */
 	__le16	s_errors;		/* Behaviour when detecting errors */
 	__le64	s_lastcheck;		/* time of last check */
 
-	__le32	s_checkinterval;	/* max. time between checks */
+/*80*/	__le32	s_checkinterval;	/* max. time between checks */
 	__le32	s_creator_os;		/* OS */
 	__le16	s_def_resuid;		/* Default uid for reserved blocks */
 	__le16	s_def_resgid;		/* Default gid for reserved blocks */
 	__le32	s_first_ino;		/* First non-reserved inode */
 
-	__le16  s_inode_size;		/* Size of an inode */
+/*90*/	__le16  s_inode_size;		/* Size of an inode */
 	__le16  s_dat_entry_size;       /* Size of a dat entry */
 	__le16  s_checkpoint_size;      /* Size of a checkpoint */
 	__le16	s_segment_usage_size;	/* Size of a segment usage */
 
-	__u8	s_uuid[16];		/* 128-bit uuid for volume */
-	char	s_volume_name[80];	/* volume name */
+/*98*/	__u8	s_uuid[16];		/* 128-bit uuid for volume */
+/*A8*/	char	s_volume_name[80];	/* volume name */
 
-	__le32  s_c_interval;           /* Commit interval of segment */
+/*F8*/	__le32  s_c_interval;           /* Commit interval of segment */
 	__le32  s_c_block_max;          /* Threshold of data amount for
 					   the segment construction */
-	__u32	s_reserved[192];	/* padding to the end of the block */
+/*100*/	__le64  s_feature_compat;	/* Compatible feature set */
+	__le64  s_feature_compat_ro;	/* Read-only compatible feature set */
+	__le64  s_feature_incompat;	/* Incompatible feature set */
+	__u32	s_reserved[186];	/* padding to the end of the block */
 };
 
 /*
@@ -228,6 +231,16 @@ struct nilfs_super_block {
 #define NILFS_MINOR_REV		0	/* minor revision */
 
 /*
+ * Feature set definitions
+ *
+ * If there is a bit set in the incompatible feature set that the kernel
+ * doesn't know about, it should refuse to mount the filesystem.
+ */
+#define NILFS_FEATURE_COMPAT_SUPP	0ULL
+#define NILFS_FEATURE_COMPAT_RO_SUPP	0ULL
+#define NILFS_FEATURE_INCOMPAT_SUPP	0ULL
+
+/*
  * Bytes count of super_block for CRC-calculation
  */
 #define NILFS_SB_BYTES  \
@@ -274,6 +287,12 @@ struct nilfs_super_block {
 #define NILFS_NAME_LEN 255
 
 /*
+ * Block size limitations
+ */
+#define NILFS_MIN_BLOCK_SIZE		1024
+#define NILFS_MAX_BLOCK_SIZE		65536
+
+/*
  * The new version of the directory entry.  Since V0 structures are
  * stored in intel byte order, and the name_len field could never be
  * bigger than 255 chars, it's safe to reclaim the extra byte for the
@@ -313,7 +332,25 @@ enum {
 #define NILFS_DIR_ROUND			(NILFS_DIR_PAD - 1)
 #define NILFS_DIR_REC_LEN(name_len)	(((name_len) + 12 + NILFS_DIR_ROUND) & \
 					~NILFS_DIR_ROUND)
+#define NILFS_MAX_REC_LEN		((1<<16)-1)
 
+static inline unsigned nilfs_rec_len_from_disk(__le16 dlen)
+{
+	unsigned len = le16_to_cpu(dlen);
+
+	if (len == NILFS_MAX_REC_LEN)
+		return 1 << 16;
+	return len;
+}
+
+static inline __le16 nilfs_rec_len_to_disk(unsigned len)
+{
+	if (len == (1 << 16))
+		return cpu_to_le16(NILFS_MAX_REC_LEN);
+	else if (len > (1 << 16))
+		BUG();
+	return cpu_to_le16(len);
+}
 
 /**
  * struct nilfs_finfo - file information
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index b752e807add..06aab5eee13 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -20,10 +20,14 @@ extern void touch_nmi_watchdog(void);
 extern void acpi_nmi_disable(void);
 extern void acpi_nmi_enable(void);
 #else
+#ifndef CONFIG_HARDLOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
 	touch_softlockup_watchdog();
 }
+#else
+extern void touch_nmi_watchdog(void);
+#endif
 static inline void acpi_nmi_disable(void) { }
 static inline void acpi_nmi_enable(void) { }
 #endif
@@ -47,4 +51,13 @@ static inline bool trigger_all_cpu_backtrace(void)
 }
 #endif
 
+#ifdef CONFIG_LOCKUP_DETECTOR
+int hw_nmi_is_cpu_stuck(struct pt_regs *);
+u64 hw_nmi_get_sample_period(void);
+extern int watchdog_enabled;
+struct ctl_table;
+extern int proc_dowatchdog_enabled(struct ctl_table *, int ,
+			void __user *, size_t *, loff_t *);
+#endif
+
 #endif
diff --git a/include/linux/of.h b/include/linux/of.h
index a367e19bb3a..cad7cf0ab27 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -70,6 +70,11 @@ extern struct device_node *allnodes;
 extern struct device_node *of_chosen;
 extern rwlock_t devtree_lock;
 
+static inline bool of_node_is_root(const struct device_node *node)
+{
+	return node && (node->parent == NULL);
+}
+
 static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
 {
 	return test_bit(flag, &n->_flags);
@@ -141,6 +146,11 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size)
 
 #define OF_BAD_ADDR	((u64)-1)
 
+#ifndef of_node_to_nid
+static inline int of_node_to_nid(struct device_node *np) { return -1; }
+#define of_node_to_nid of_node_to_nid
+#endif
+
 extern struct device_node *of_find_node_by_name(struct device_node *from,
 	const char *name);
 #define for_each_node_by_name(dn, name) \
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
new file mode 100644
index 00000000000..8aea06f0564
--- /dev/null
+++ b/include/linux/of_address.h
@@ -0,0 +1,44 @@
+#ifndef __OF_ADDRESS_H
+#define __OF_ADDRESS_H
+#include <linux/ioport.h>
+#include <linux/of.h>
+
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+			   u64 *size, unsigned int *flags);
+
+#ifndef pci_address_to_pio
+static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
+#define pci_address_to_pio pci_address_to_pio
+#endif
+
+#ifdef CONFIG_PCI
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+			       u64 *size, unsigned int *flags);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+				      struct resource *r);
+#else /* CONFIG_PCI */
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+				             struct resource *r)
+{
+	return -ENOSYS;
+}
+
+static inline const u32 *of_get_pci_address(struct device_node *dev,
+		int bar_no, u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_PCI */
+
+
+#endif /* __OF_ADDRESS_H */
+
diff --git a/include/linux/of_device.h b/include/linux/of_device.h
index 11651facc5f..35aa44ad9f2 100644
--- a/include/linux/of_device.h
+++ b/include/linux/of_device.h
@@ -1,32 +1,77 @@
 #ifndef _LINUX_OF_DEVICE_H
 #define _LINUX_OF_DEVICE_H
 
+/*
+ * The of_device *was* a kind of "base class" that was a superset of
+ * struct device for use by devices attached to an OF node and probed
+ * using OF properties.  However, the important bit of OF-style
+ * probing, namely the device node pointer, has been moved into the
+ * common struct device when CONFIG_OF is set to make OF-style probing
+ * available to all bus types.  So now, just make of_device and
+ * platform_device equivalent so that current of_platform bus users
+ * can be transparently migrated over to using the platform bus.
+ *
+ * This line will go away once all references to of_device are removed
+ * from the kernel.
+ */
+#define of_device platform_device
+#include <linux/platform_device.h>
+#include <linux/of_platform.h> /* temporary until merge */
+
 #ifdef CONFIG_OF_DEVICE
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/mod_devicetable.h>
 
-#include <asm/of_device.h>
-
 #define	to_of_device(d) container_of(d, struct of_device, dev)
 
 extern const struct of_device_id *of_match_device(
 	const struct of_device_id *matches, const struct device *dev);
+extern void of_device_make_bus_id(struct device *dev);
+
+/**
+ * of_driver_match_device - Tell if a driver's of_match_table matches a device.
+ * @drv: the device_driver structure to test
+ * @dev: the device structure to match against
+ */
+static inline int of_driver_match_device(const struct device *dev,
+					 const struct device_driver *drv)
+{
+	return of_match_device(drv->of_match_table, dev) != NULL;
+}
 
-extern struct of_device *of_dev_get(struct of_device *dev);
-extern void of_dev_put(struct of_device *dev);
+extern struct platform_device *of_dev_get(struct platform_device *dev);
+extern void of_dev_put(struct platform_device *dev);
 
-extern int of_device_register(struct of_device *ofdev);
-extern void of_device_unregister(struct of_device *ofdev);
+extern int of_device_register(struct platform_device *ofdev);
+extern void of_device_unregister(struct platform_device *ofdev);
 extern void of_release_dev(struct device *dev);
 
-static inline void of_device_free(struct of_device *dev)
+static inline void of_device_free(struct platform_device *dev)
 {
 	of_release_dev(&dev->dev);
 }
 
-extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+extern ssize_t of_device_get_modalias(struct device *dev,
 					char *str, ssize_t len);
+
+extern int of_device_uevent(struct device *dev, struct kobj_uevent_env *env);
+
+
+#else /* CONFIG_OF_DEVICE */
+
+static inline int of_driver_match_device(struct device *dev,
+					 struct device_driver *drv)
+{
+	return 0;
+}
+
+static inline int of_device_uevent(struct device *dev,
+				   struct kobj_uevent_env *env)
+{
+	return -ENODEV;
+}
+
 #endif /* CONFIG_OF_DEVICE */
 
 #endif /* _LINUX_OF_DEVICE_H */
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index fc2472c3c25..6598c04dab0 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -33,34 +33,17 @@ enum of_gpio_flags {
 #ifdef CONFIG_OF_GPIO
 
 /*
- * Generic OF GPIO chip
- */
-struct of_gpio_chip {
-	struct gpio_chip gc;
-	int gpio_cells;
-	int (*xlate)(struct of_gpio_chip *of_gc, struct device_node *np,
-		     const void *gpio_spec, enum of_gpio_flags *flags);
-};
-
-static inline struct of_gpio_chip *to_of_gpio_chip(struct gpio_chip *gc)
-{
-	return container_of(gc, struct of_gpio_chip, gc);
-}
-
-/*
  * OF GPIO chip for memory mapped banks
  */
 struct of_mm_gpio_chip {
-	struct of_gpio_chip of_gc;
+	struct gpio_chip gc;
 	void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
 	void __iomem *regs;
 };
 
 static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
 {
-	struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
-
-	return container_of(of_gc, struct of_mm_gpio_chip, of_gc);
+	return container_of(gc, struct of_mm_gpio_chip, gc);
 }
 
 extern int of_get_gpio_flags(struct device_node *np, int index,
@@ -69,11 +52,12 @@ extern unsigned int of_gpio_count(struct device_node *np);
 
 extern int of_mm_gpiochip_add(struct device_node *np,
 			      struct of_mm_gpio_chip *mm_gc);
-extern int of_gpio_simple_xlate(struct of_gpio_chip *of_gc,
-				struct device_node *np,
-				const void *gpio_spec,
-				enum of_gpio_flags *flags);
-#else
+
+extern void of_gpiochip_add(struct gpio_chip *gc);
+extern void of_gpiochip_remove(struct gpio_chip *gc);
+extern struct gpio_chip *of_node_to_gpiochip(struct device_node *np);
+
+#else /* CONFIG_OF_GPIO */
 
 /* Drivers may not strictly depend on the GPIO support, so let them link. */
 static inline int of_get_gpio_flags(struct device_node *np, int index,
@@ -87,6 +71,9 @@ static inline unsigned int of_gpio_count(struct device_node *np)
 	return 0;
 }
 
+static inline void of_gpiochip_add(struct gpio_chip *gc) { }
+static inline void of_gpiochip_remove(struct gpio_chip *gc) { }
+
 #endif /* CONFIG_OF_GPIO */
 
 /**
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index 34974b5a76f..0efe8d465f5 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -12,12 +12,19 @@
 #ifndef __LINUX_OF_I2C_H
 #define __LINUX_OF_I2C_H
 
+#if defined(CONFIG_OF_I2C) || defined(CONFIG_OF_I2C_MODULE)
 #include <linux/i2c.h>
 
-void of_register_i2c_devices(struct i2c_adapter *adap,
-			     struct device_node *adap_node);
+extern void of_i2c_register_devices(struct i2c_adapter *adap);
 
 /* must call put_device() when done with returned i2c_client device */
-struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+extern struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
+#else
+static inline void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	return;
+}
+#endif /* CONFIG_OF_I2C */
 
 #endif /* __LINUX_OF_I2C_H */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
new file mode 100644
index 00000000000..5929781c104
--- /dev/null
+++ b/include/linux/of_irq.h
@@ -0,0 +1,70 @@
+#ifndef __OF_IRQ_H
+#define __OF_IRQ_H
+
+#if defined(CONFIG_OF)
+struct of_irq;
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+
+/*
+ * irq_of_parse_and_map() is used ba all OF enabled platforms; but SPARC
+ * implements it differently.  However, the prototype is the same for all,
+ * so declare it here regardless of the CONFIG_OF_IRQ setting.
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *node, int index);
+
+#if defined(CONFIG_OF_IRQ)
+/**
+ * of_irq - container for device_node/irq_specifier pair for an irq controller
+ * @controller: pointer to interrupt controller device tree node
+ * @size: size of interrupt specifier
+ * @specifier: array of cells @size long specifing the specific interrupt
+ *
+ * This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+#define OF_MAX_IRQ_SPEC		4 /* We handle specifiers of at most 4 cells */
+struct of_irq {
+	struct device_node *controller; /* Interrupt controller node */
+	u32 size; /* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+/*
+ * Workarounds only applied to 32bit powermac machines
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_PMAC)
+extern unsigned int of_irq_workarounds;
+extern struct device_node *of_irq_dflt_pic;
+extern int of_irq_map_oldworld(struct device_node *device, int index,
+			       struct of_irq *out_irq);
+#else /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
+#define of_irq_workarounds (0)
+#define of_irq_dflt_pic (NULL)
+static inline int of_irq_map_oldworld(struct device_node *device, int index,
+				      struct of_irq *out_irq)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */
+
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+			  u32 ointsize, const u32 *addr,
+			  struct of_irq *out_irq);
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  const u32 *intspec,
+					  unsigned int intsize);
+extern int of_irq_to_resource(struct device_node *dev, int index,
+			      struct resource *r);
+
+#endif /* CONFIG_OF_IRQ */
+#endif /* CONFIG_OF */
+#endif /* __OF_IRQ_H */
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 1643d3761eb..4e6d989c06d 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -17,29 +17,24 @@
 #include <linux/mod_devicetable.h>
 #include <linux/pm.h>
 #include <linux/of_device.h>
-
-/*
- * The of_platform_bus_type is a bus type used by drivers that do not
- * attach to a macio or similar bus but still use OF probing
- * mechanism
- */
-extern struct bus_type of_platform_bus_type;
+#include <linux/platform_device.h>
 
 /*
  * An of_platform_driver driver is attached to a basic of_device on
- * the "platform bus" (of_platform_bus_type).
+ * the "platform bus" (platform_bus_type).
  */
 struct of_platform_driver
 {
-	int	(*probe)(struct of_device* dev,
+	int	(*probe)(struct platform_device* dev,
 			 const struct of_device_id *match);
-	int	(*remove)(struct of_device* dev);
+	int	(*remove)(struct platform_device* dev);
 
-	int	(*suspend)(struct of_device* dev, pm_message_t state);
-	int	(*resume)(struct of_device* dev);
-	int	(*shutdown)(struct of_device* dev);
+	int	(*suspend)(struct platform_device* dev, pm_message_t state);
+	int	(*resume)(struct platform_device* dev);
+	int	(*shutdown)(struct platform_device* dev);
 
 	struct device_driver	driver;
+	struct platform_driver	platform_driver;
 };
 #define	to_of_platform_driver(drv) \
 	container_of(drv,struct of_platform_driver, driver)
@@ -49,20 +44,30 @@ extern int of_register_driver(struct of_platform_driver *drv,
 extern void of_unregister_driver(struct of_platform_driver *drv);
 
 /* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
-	return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
-	of_unregister_driver(drv);
-}
+extern int of_register_platform_driver(struct of_platform_driver *drv);
+extern void of_unregister_platform_driver(struct of_platform_driver *drv);
 
-#include <asm/of_platform.h>
-
-extern struct of_device *of_find_device_by_node(struct device_node *np);
+extern struct platform_device *of_device_alloc(struct device_node *np,
+					 const char *bus_id,
+					 struct device *parent);
+extern struct platform_device *of_find_device_by_node(struct device_node *np);
 
 extern int of_bus_type_init(struct bus_type *bus, const char *name);
+
+#if !defined(CONFIG_SPARC) /* SPARC has its own device registration method */
+/* Platform devices and busses creation */
+extern struct platform_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
+
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+				 const struct of_device_id *matches,
+				 struct device *parent);
+#endif /* !CONFIG_SPARC */
+
 #endif /* CONFIG_OF_DEVICE */
 
 #endif	/* _LINUX_OF_PLATFORM_H */
diff --git a/include/linux/of_spi.h b/include/linux/of_spi.h
index 5f71ee8c086..9e3e70f78ae 100644
--- a/include/linux/of_spi.h
+++ b/include/linux/of_spi.h
@@ -9,10 +9,15 @@
 #ifndef __LINUX_OF_SPI_H
 #define __LINUX_OF_SPI_H
 
-#include <linux/of.h>
 #include <linux/spi/spi.h>
 
-extern void of_register_spi_devices(struct spi_master *master,
-				    struct device_node *np);
+#if defined(CONFIG_OF_SPI) || defined(CONFIG_OF_SPI_MODULE)
+extern void of_register_spi_devices(struct spi_master *master);
+#else
+static inline void of_register_spi_devices(struct spi_master *master)
+{
+	return;
+}
+#endif /* CONFIG_OF_SPI */
 
 #endif /* __LINUX_OF_SPI */
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 7e4cd616bcb..c0b018790f0 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -85,6 +85,9 @@
 #define OMAPFB_MEMTYPE_SRAM		1
 #define OMAPFB_MEMTYPE_MAX		1
 
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
 enum omapfb_color_format {
 	OMAPFB_COLOR_RGB565 = 0,
 	OMAPFB_COLOR_YUV422,
@@ -136,7 +139,7 @@ struct omapfb_plane_info {
 	__u8  enabled;
 	__u8  channel_out;
 	__u8  mirror;
-	__u8  reserved1;
+	__u8  mem_idx;
 	__u32 out_width;
 	__u32 out_height;
 	__u32 reserved2[12];
diff --git a/include/linux/oom.h b/include/linux/oom.h
index 53766231562..f209b683e11 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,19 +1,34 @@
 #ifndef __INCLUDE_LINUX_OOM_H
 #define __INCLUDE_LINUX_OOM_H
 
-/* /proc/<pid>/oom_adj set to -17 protects from the oom-killer */
+/*
+ * /proc/<pid>/oom_adj is deprecated, see
+ * Documentation/feature-removal-schedule.txt.
+ *
+ * /proc/<pid>/oom_adj set to -17 protects from the oom-killer
+ */
 #define OOM_DISABLE (-17)
 /* inclusive */
 #define OOM_ADJUST_MIN (-16)
 #define OOM_ADJUST_MAX 15
 
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN	(-1000)
+#define OOM_SCORE_ADJ_MAX	1000
+
 #ifdef __KERNEL__
 
+#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/nodemask.h>
 
 struct zonelist;
 struct notifier_block;
+struct mem_cgroup;
+struct task_struct;
 
 /*
  * Types of limitations to the nodes from which allocations may occur
@@ -22,9 +37,12 @@ enum oom_constraint {
 	CONSTRAINT_NONE,
 	CONSTRAINT_CPUSET,
 	CONSTRAINT_MEMORY_POLICY,
+	CONSTRAINT_MEMCG,
 };
 
-extern int try_set_zone_oom(struct zonelist *zonelist, gfp_t gfp_flags);
+extern unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
+			const nodemask_t *nodemask, unsigned long totalpages);
+extern int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
 extern void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_flags);
 
 extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
@@ -43,5 +61,14 @@ static inline void oom_killer_enable(void)
 {
 	oom_killer_disabled = false;
 }
+
+/* The badness from the OOM killer */
+extern unsigned long badness(struct task_struct *p, struct mem_cgroup *mem,
+		      const nodemask_t *nodemask, unsigned long uptime);
+
+/* sysctls */
+extern int sysctl_oom_dump_tasks;
+extern int sysctl_oom_kill_allocating_task;
+extern int sysctl_panic_on_oom;
 #endif /* __KERNEL__*/
 #endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 5b59f35dcb8..6fa317801e1 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -128,7 +128,6 @@ enum pageflags {
 
 	/* SLUB */
 	PG_slub_frozen = PG_active,
-	PG_slub_debug = PG_error,
 };
 
 #ifndef __GENERATING_BOUNDS_H
@@ -215,7 +214,6 @@ PAGEFLAG(SwapBacked, swapbacked) __CLEARPAGEFLAG(SwapBacked, swapbacked)
 __PAGEFLAG(SlobFree, slob_free)
 
 __PAGEFLAG(SlubFrozen, slub_frozen)
-__PAGEFLAG(SlubDebug, slub_debug)
 
 /*
  * Private page markings that may be used by the filesystem that owns the page
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 3c62ed40849..78a702ce4fc 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -423,8 +423,10 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size)
 		const char __user *end = uaddr + size - 1;
 
 		if (((unsigned long)uaddr & PAGE_MASK) !=
-				((unsigned long)end & PAGE_MASK))
+				((unsigned long)end & PAGE_MASK)) {
 		 	ret = __get_user(c, end);
+			(void)c;
+		}
 	}
 	return ret;
 }
diff --git a/include/linux/pch_dma.h b/include/linux/pch_dma.h
new file mode 100644
index 00000000000..fdafe529ef8
--- /dev/null
+++ b/include/linux/pch_dma.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PCH_DMA_H
+#define PCH_DMA_H
+
+#include <linux/dmaengine.h>
+
+enum pch_dma_width {
+	PCH_DMA_WIDTH_1_BYTE,
+	PCH_DMA_WIDTH_2_BYTES,
+	PCH_DMA_WIDTH_4_BYTES,
+};
+
+struct pch_dma_slave {
+	struct device		*dma_dev;
+	unsigned int		chan_id;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum pch_dma_width	width;
+};
+
+#endif
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f26fda76b87..b1d17956a15 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -270,6 +270,8 @@ struct pci_dev {
 	unsigned int	d1_support:1;	/* Low power state D1 is supported */
 	unsigned int	d2_support:1;	/* Low power state D2 is supported */
 	unsigned int	no_d1d2:1;	/* Only allow D0 and D3 */
+	unsigned int	mmio_always_on:1;	/* disallow turning off io/mem
+						   decoding during bar sizing */
 	unsigned int	wakeup_prepared:1;
 	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index e69612cace6..c81eec4d3c3 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2264,6 +2264,7 @@
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 
 #define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_DEVICE_ID_MPC8308		0xc006
 #define PCI_DEVICE_ID_MPC8315E		0x00b4
 #define PCI_DEVICE_ID_MPC8315		0x00b5
 #define PCI_DEVICE_ID_MPC8314E		0x00b6
@@ -2324,9 +2325,11 @@
 #define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
 #define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
 #define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
+#define PCI_DEVICE_ID_JMICRON_JMB364	0x2364
 #define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
 #define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
+#define PCI_DEVICE_ID_JMICRON_JMB369	0x2369
 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383
@@ -2772,3 +2775,6 @@
 #define PCI_DEVICE_ID_RME_DIGI32	0x9896
 #define PCI_DEVICE_ID_RME_DIGI32_PRO	0x9897
 #define PCI_DEVICE_ID_RME_DIGI32_8	0x9898
+
+#define PCI_VENDOR_ID_XEN		0x5853
+#define PCI_DEVICE_ID_XEN_PLATFORM	0x0001
diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h
index c88d67b5939..8a7d510ffa9 100644
--- a/include/linux/percpu_counter.h
+++ b/include/linux/percpu_counter.h
@@ -40,6 +40,7 @@ void percpu_counter_destroy(struct percpu_counter *fbc);
 void percpu_counter_set(struct percpu_counter *fbc, s64 amount);
 void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch);
 s64 __percpu_counter_sum(struct percpu_counter *fbc);
+int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs);
 
 static inline void percpu_counter_add(struct percpu_counter *fbc, s64 amount)
 {
@@ -98,6 +99,16 @@ static inline void percpu_counter_set(struct percpu_counter *fbc, s64 amount)
 	fbc->count = amount;
 }
 
+static inline int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs)
+{
+	if (fbc->count > rhs)
+		return 1;
+	else if (fbc->count < rhs)
+		return -1;
+	else
+		return 0;
+}
+
 static inline void
 percpu_counter_add(struct percpu_counter *fbc, s64 amount)
 {
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 5d0266d9498..716f99b682c 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -214,8 +214,9 @@ struct perf_event_attr {
 				 *  See also PERF_RECORD_MISC_EXACT_IP
 				 */
 				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
 
-				__reserved_1   : 47;
+				__reserved_1   : 46;
 
 	union {
 		__u32		wakeup_events;	  /* wakeup every n events */
@@ -461,6 +462,7 @@ enum perf_callchain_context {
 
 #ifdef CONFIG_PERF_EVENTS
 # include <asm/perf_event.h>
+# include <asm/local64.h>
 #endif
 
 struct perf_guest_info_callbacks {
@@ -531,14 +533,16 @@ struct hw_perf_event {
 			struct hrtimer	hrtimer;
 		};
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
-		/* breakpoint */
-		struct arch_hw_breakpoint	info;
+		struct { /* breakpoint */
+			struct arch_hw_breakpoint	info;
+			struct list_head		bp_list;
+		};
 #endif
 	};
-	atomic64_t			prev_count;
+	local64_t			prev_count;
 	u64				sample_period;
 	u64				last_period;
-	atomic64_t			period_left;
+	local64_t			period_left;
 	u64				interrupts;
 
 	u64				freq_time_stamp;
@@ -548,7 +552,10 @@ struct hw_perf_event {
 
 struct perf_event;
 
-#define PERF_EVENT_TXN_STARTED 1
+/*
+ * Common implementation detail of pmu::{start,commit,cancel}_txn
+ */
+#define PERF_EVENT_TXN 0x1
 
 /**
  * struct pmu - generic performance monitoring unit
@@ -562,14 +569,28 @@ struct pmu {
 	void (*unthrottle)		(struct perf_event *event);
 
 	/*
-	 * group events scheduling is treated as a transaction,
-	 * add group events as a whole and perform one schedulability test.
-	 * If test fails, roll back the whole group
+	 * Group events scheduling is treated as a transaction, add group
+	 * events as a whole and perform one schedulability test. If the test
+	 * fails, roll back the whole group
 	 */
 
+	/*
+	 * Start the transaction, after this ->enable() doesn't need
+	 * to do schedulability tests.
+	 */
 	void (*start_txn)	(const struct pmu *pmu);
-	void (*cancel_txn)	(const struct pmu *pmu);
+	/*
+	 * If ->start_txn() disabled the ->enable() schedulability test
+	 * then ->commit_txn() is required to perform one. On success
+	 * the transaction is closed. On error the transaction is kept
+	 * open until ->cancel_txn() is called.
+	 */
 	int  (*commit_txn)	(const struct pmu *pmu);
+	/*
+	 * Will cancel the transaction, assumes ->disable() is called for
+	 * each successfull ->enable() during the transaction.
+	 */
+	void (*cancel_txn)	(const struct pmu *pmu);
 };
 
 /**
@@ -584,7 +605,9 @@ enum perf_event_active_state {
 
 struct file;
 
-struct perf_mmap_data {
+#define PERF_BUFFER_WRITABLE		0x01
+
+struct perf_buffer {
 	atomic_t			refcount;
 	struct rcu_head			rcu_head;
 #ifdef CONFIG_PERF_USE_VMALLOC
@@ -650,7 +673,8 @@ struct perf_event {
 
 	enum perf_event_active_state	state;
 	unsigned int			attach_state;
-	atomic64_t			count;
+	local64_t			count;
+	atomic64_t			child_count;
 
 	/*
 	 * These are the total time in nanoseconds that the event
@@ -709,7 +733,7 @@ struct perf_event {
 	atomic_t			mmap_count;
 	int				mmap_locked;
 	struct user_struct		*mmap_user;
-	struct perf_mmap_data		*data;
+	struct perf_buffer		*buffer;
 
 	/* poll related */
 	wait_queue_head_t		waitq;
@@ -807,7 +831,7 @@ struct perf_cpu_context {
 
 struct perf_output_handle {
 	struct perf_event		*event;
-	struct perf_mmap_data		*data;
+	struct perf_buffer		*buffer;
 	unsigned long			wakeup;
 	unsigned long			size;
 	void				*addr;
@@ -910,8 +934,10 @@ extern atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
 
 extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64);
 
-extern void
-perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip);
+#ifndef perf_arch_fetch_caller_regs
+static inline void
+perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip) { }
+#endif
 
 /*
  * Take a snapshot of the regs. Skip ip and frame pointer to
@@ -921,31 +947,11 @@ perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip);
  * - bp for callchains
  * - eflags, for future purposes, just in case
  */
-static inline void perf_fetch_caller_regs(struct pt_regs *regs, int skip)
+static inline void perf_fetch_caller_regs(struct pt_regs *regs)
 {
-	unsigned long ip;
-
 	memset(regs, 0, sizeof(*regs));
 
-	switch (skip) {
-	case 1 :
-		ip = CALLER_ADDR0;
-		break;
-	case 2 :
-		ip = CALLER_ADDR1;
-		break;
-	case 3 :
-		ip = CALLER_ADDR2;
-		break;
-	case 4:
-		ip = CALLER_ADDR3;
-		break;
-	/* No need to support further for now */
-	default:
-		ip = 0;
-	}
-
-	return perf_arch_fetch_caller_regs(regs, ip, skip);
+	perf_arch_fetch_caller_regs(regs, CALLER_ADDR0);
 }
 
 static inline void
@@ -955,21 +961,14 @@ perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
 		struct pt_regs hot_regs;
 
 		if (!regs) {
-			perf_fetch_caller_regs(&hot_regs, 1);
+			perf_fetch_caller_regs(&hot_regs);
 			regs = &hot_regs;
 		}
 		__perf_sw_event(event_id, nr, nmi, regs, addr);
 	}
 }
 
-extern void __perf_event_mmap(struct vm_area_struct *vma);
-
-static inline void perf_event_mmap(struct vm_area_struct *vma)
-{
-	if (vma->vm_flags & VM_EXEC)
-		__perf_event_mmap(vma);
-}
-
+extern void perf_event_mmap(struct vm_area_struct *vma);
 extern struct perf_guest_info_callbacks *perf_guest_cbs;
 extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
 extern int perf_unregister_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
@@ -1001,7 +1000,7 @@ static inline bool perf_paranoid_kernel(void)
 extern void perf_event_init(void);
 extern void perf_tp_event(u64 addr, u64 count, void *record,
 			  int entry_size, struct pt_regs *regs,
-			  struct hlist_head *head);
+			  struct hlist_head *head, int rctx);
 extern void perf_bp_event(struct perf_event *event, void *data);
 
 #ifndef perf_misc_flags
@@ -1068,7 +1067,7 @@ static inline void perf_event_disable(struct perf_event *event)		{ }
 #define perf_cpu_notifier(fn)					\
 do {								\
 	static struct notifier_block fn##_nb __cpuinitdata =	\
-		{ .notifier_call = fn, .priority = 20 };	\
+		{ .notifier_call = fn, .priority = CPU_PRI_PERF }; \
 	fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE,		\
 		(void *)(unsigned long)smp_processor_id());	\
 	fn(&fn##_nb, (unsigned long)CPU_STARTING,		\
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 5417944d368..d7ecad0093b 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -43,10 +43,64 @@ extern struct resource *platform_get_resource_byname(struct platform_device *, u
 extern int platform_get_irq_byname(struct platform_device *, const char *);
 extern int platform_add_devices(struct platform_device **, int);
 
-extern struct platform_device *platform_device_register_simple(const char *, int id,
-					const struct resource *, unsigned int);
-extern struct platform_device *platform_device_register_data(struct device *,
-		const char *, int, const void *, size_t);
+extern struct platform_device *platform_device_register_resndata(
+		struct device *parent, const char *name, int id,
+		const struct resource *res, unsigned int num,
+		const void *data, size_t size);
+
+/**
+ * platform_device_register_simple - add a platform-level device and its resources
+ * @name: base name of the device we're adding
+ * @id: instance id
+ * @res: set of resources that needs to be allocated for the device
+ * @num: number of resources
+ *
+ * This function creates a simple platform device that requires minimal
+ * resource and memory management. Canned release function freeing memory
+ * allocated for the device allows drivers using such devices to be
+ * unloaded without waiting for the last reference to the device to be
+ * dropped.
+ *
+ * This interface is primarily intended for use with legacy drivers which
+ * probe hardware directly.  Because such drivers create sysfs device nodes
+ * themselves, rather than letting system infrastructure handle such device
+ * enumeration tasks, they don't fully conform to the Linux driver model.
+ * In particular, when such drivers are built as modules, they can't be
+ * "hotplugged".
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+static inline struct platform_device *platform_device_register_simple(
+		const char *name, int id,
+		const struct resource *res, unsigned int num)
+{
+	return platform_device_register_resndata(NULL, name, id,
+			res, num, NULL, 0);
+}
+
+/**
+ * platform_device_register_data - add a platform-level device with platform-specific data
+ * @parent: parent device for the device we're adding
+ * @name: base name of the device we're adding
+ * @id: instance id
+ * @data: platform specific data for this platform device
+ * @size: size of platform specific data
+ *
+ * This function creates a simple platform device that requires minimal
+ * resource and memory management. Canned release function freeing memory
+ * allocated for the device allows drivers using such devices to be
+ * unloaded without waiting for the last reference to the device to be
+ * dropped.
+ *
+ * Returns &struct platform_device pointer on success, or ERR_PTR() on error.
+ */
+static inline struct platform_device *platform_device_register_data(
+		struct device *parent, const char *name, int id,
+		const void *data, size_t size)
+{
+	return platform_device_register_resndata(parent, name, id,
+			NULL, 0, data, size);
+}
 
 extern struct platform_device *platform_device_alloc(const char *name, int id);
 extern int platform_device_add_resources(struct platform_device *pdev,
diff --git a/include/linux/power/jz4740-battery.h b/include/linux/power/jz4740-battery.h
new file mode 100644
index 00000000000..19c9610c720
--- /dev/null
+++ b/include/linux/power/jz4740-battery.h
@@ -0,0 +1,24 @@
+/*
+ *  Copyright (C) 2009, Jiejing Zhang <kzjeef@gmail.com>
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __JZ4740_BATTERY_H
+#define __JZ4740_BATTERY_H
+
+struct jz_battery_platform_data {
+	struct power_supply_info info;
+	int gpio_charge;	/* GPIO port of Charger state */
+	int gpio_charge_active_low;
+};
+
+#endif
diff --git a/include/linux/ppp_channel.h b/include/linux/ppp_channel.h
index bff98ec1bfe..5d87f810a3b 100644
--- a/include/linux/ppp_channel.h
+++ b/include/linux/ppp_channel.h
@@ -36,7 +36,7 @@ struct ppp_channel_ops {
 
 struct ppp_channel {
 	void		*private;	/* channel private data */
-	struct ppp_channel_ops *ops;	/* operations for this channel */
+	const struct ppp_channel_ops *ops; /* operations for this channel */
 	int		mtu;		/* max transmit packet size */
 	int		hdrlen;		/* amount of headroom channel needs */
 	void		*ppp;		/* opaque to channel */
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index aa36793b48b..d50ba858cfe 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -28,6 +28,12 @@ static inline bool is_quota_modification(struct inode *inode, struct iattr *ia)
 
 #if defined(CONFIG_QUOTA)
 
+#define quota_error(sb, fmt, args...) \
+	__quota_error((sb), __func__, fmt , ## args)
+
+extern void __quota_error(struct super_block *sb, const char *func,
+			 const char *fmt, ...);
+
 /*
  * declaration of quota_function calls in kernel.
  */
@@ -145,11 +151,6 @@ static inline bool sb_has_quota_active(struct super_block *sb, int type)
 	       !sb_has_quota_suspended(sb, type);
 }
 
-static inline unsigned sb_any_quota_active(struct super_block *sb)
-{
-	return sb_any_quota_loaded(sb) & ~sb_any_quota_suspended(sb);
-}
-
 /*
  * Operations supported for diskquotas.
  */
@@ -194,11 +195,6 @@ static inline int sb_has_quota_active(struct super_block *sb, int type)
 	return 0;
 }
 
-static inline int sb_any_quota_active(struct super_block *sb)
-{
-	return 0;
-}
-
 static inline void dquot_initialize(struct inode *inode)
 {
 }
@@ -270,7 +266,7 @@ static inline int dquot_alloc_space_nodirty(struct inode *inode, qsize_t nr)
 static inline void dquot_alloc_space_nofail(struct inode *inode, qsize_t nr)
 {
 	__dquot_alloc_space(inode, nr, DQUOT_SPACE_WARN|DQUOT_SPACE_NOFAIL);
-	mark_inode_dirty(inode);
+	mark_inode_dirty_sync(inode);
 }
 
 static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
@@ -279,7 +275,7 @@ static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
 
 	ret = dquot_alloc_space_nodirty(inode, nr);
 	if (!ret)
-		mark_inode_dirty(inode);
+		mark_inode_dirty_sync(inode);
 	return ret;
 }
 
@@ -309,7 +305,7 @@ static inline int dquot_prealloc_block(struct inode *inode, qsize_t nr)
 
 	ret = dquot_prealloc_block_nodirty(inode, nr);
 	if (!ret)
-		mark_inode_dirty(inode);
+		mark_inode_dirty_sync(inode);
 	return ret;
 }
 
@@ -325,7 +321,7 @@ static inline int dquot_claim_block(struct inode *inode, qsize_t nr)
 
 	ret = dquot_claim_space_nodirty(inode, nr << inode->i_blkbits);
 	if (!ret)
-		mark_inode_dirty(inode);
+		mark_inode_dirty_sync(inode);
 	return ret;
 }
 
@@ -337,7 +333,7 @@ static inline void dquot_free_space_nodirty(struct inode *inode, qsize_t nr)
 static inline void dquot_free_space(struct inode *inode, qsize_t nr)
 {
 	dquot_free_space_nodirty(inode, nr);
-	mark_inode_dirty(inode);
+	mark_inode_dirty_sync(inode);
 }
 
 static inline void dquot_free_block_nodirty(struct inode *inode, qsize_t nr)
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index 55ca73cf25e..634b8e674ac 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -55,7 +55,7 @@ static inline int radix_tree_is_indirect_ptr(void *ptr)
 
 /*** radix-tree API starts here ***/
 
-#define RADIX_TREE_MAX_TAGS 2
+#define RADIX_TREE_MAX_TAGS 3
 
 /* root tags are stored in gfp_mask, shifted by __GFP_BITS_SHIFT */
 struct radix_tree_root {
@@ -192,6 +192,10 @@ unsigned int
 radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
 		unsigned long first_index, unsigned int max_items,
 		unsigned int tag);
+unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
+		unsigned long *first_indexp, unsigned long last_index,
+		unsigned long nr_to_tag,
+		unsigned int fromtag, unsigned int totag);
 int radix_tree_tagged(struct radix_tree_root *root, unsigned int tag);
 
 static inline void radix_tree_preload_end(void)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index b653b4aaa8a..9fbc54a2585 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -40,6 +40,7 @@
 #include <linux/seqlock.h>
 #include <linux/lockdep.h>
 #include <linux/completion.h>
+#include <linux/debugobjects.h>
 
 #ifdef CONFIG_RCU_TORTURE_TEST
 extern int rcutorture_runnable; /* for sysctl */
@@ -79,6 +80,16 @@ extern void rcu_init(void);
        (ptr)->next = NULL; (ptr)->func = NULL; \
 } while (0)
 
+/*
+ * init_rcu_head_on_stack()/destroy_rcu_head_on_stack() are needed for dynamic
+ * initialization and destruction of rcu_head on the stack. rcu_head structures
+ * allocated dynamically in the heap or defined statically don't need any
+ * initialization.
+ */
+#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
+extern void init_rcu_head_on_stack(struct rcu_head *head);
+extern void destroy_rcu_head_on_stack(struct rcu_head *head);
+#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 static inline void init_rcu_head_on_stack(struct rcu_head *head)
 {
 }
@@ -86,6 +97,7 @@ static inline void init_rcu_head_on_stack(struct rcu_head *head)
 static inline void destroy_rcu_head_on_stack(struct rcu_head *head)
 {
 }
+#endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 
@@ -517,4 +529,74 @@ extern void call_rcu(struct rcu_head *head,
 extern void call_rcu_bh(struct rcu_head *head,
 			void (*func)(struct rcu_head *head));
 
+/*
+ * debug_rcu_head_queue()/debug_rcu_head_unqueue() are used internally
+ * by call_rcu() and rcu callback execution, and are therefore not part of the
+ * RCU API. Leaving in rcupdate.h because they are used by all RCU flavors.
+ */
+
+#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
+# define STATE_RCU_HEAD_READY	0
+# define STATE_RCU_HEAD_QUEUED	1
+
+extern struct debug_obj_descr rcuhead_debug_descr;
+
+static inline void debug_rcu_head_queue(struct rcu_head *head)
+{
+	debug_object_activate(head, &rcuhead_debug_descr);
+	debug_object_active_state(head, &rcuhead_debug_descr,
+				  STATE_RCU_HEAD_READY,
+				  STATE_RCU_HEAD_QUEUED);
+}
+
+static inline void debug_rcu_head_unqueue(struct rcu_head *head)
+{
+	debug_object_active_state(head, &rcuhead_debug_descr,
+				  STATE_RCU_HEAD_QUEUED,
+				  STATE_RCU_HEAD_READY);
+	debug_object_deactivate(head, &rcuhead_debug_descr);
+}
+#else	/* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+static inline void debug_rcu_head_queue(struct rcu_head *head)
+{
+}
+
+static inline void debug_rcu_head_unqueue(struct rcu_head *head)
+{
+}
+#endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
+
+#ifndef CONFIG_PROVE_RCU
+#define __do_rcu_dereference_check(c) do { } while (0)
+#endif /* #ifdef CONFIG_PROVE_RCU */
+
+#define __rcu_dereference_index_check(p, c) \
+	({ \
+		typeof(p) _________p1 = ACCESS_ONCE(p); \
+		__do_rcu_dereference_check(c); \
+		smp_read_barrier_depends(); \
+		(_________p1); \
+	})
+
+/**
+ * rcu_dereference_index_check() - rcu_dereference for indices with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
+ *
+ * Similar to rcu_dereference_check(), but omits the sparse checking.
+ * This allows rcu_dereference_index_check() to be used on integers,
+ * which can then be used as array indices.  Attempting to use
+ * rcu_dereference_check() on an integer will give compiler warnings
+ * because the sparse address-space mechanism relies on dereferencing
+ * the RCU-protected pointer.  Dereferencing integers is not something
+ * that even gcc will put up with.
+ *
+ * Note that this function does not implicitly check for RCU read-side
+ * critical sections.  If this function gains lots of uses, it might
+ * make sense to provide versions for each flavor of RCU, but it does
+ * not make sense as of early 2010.
+ */
+#define rcu_dereference_index_check(p, c) \
+	__rcu_dereference_index_check((p), (c))
+
 #endif /* __LINUX_RCUPDATE_H */
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 77216742c17..d6661de56f3 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -26,6 +26,7 @@
  */
 struct anon_vma {
 	spinlock_t lock;	/* Serialize access to vma list */
+	struct anon_vma *root;	/* Root of this anon_vma tree */
 #if defined(CONFIG_KSM) || defined(CONFIG_MIGRATION)
 
 	/*
@@ -80,6 +81,13 @@ static inline int anonvma_external_refcount(struct anon_vma *anon_vma)
 {
 	return atomic_read(&anon_vma->external_refcount);
 }
+
+static inline void get_anon_vma(struct anon_vma *anon_vma)
+{
+	atomic_inc(&anon_vma->external_refcount);
+}
+
+void drop_anon_vma(struct anon_vma *);
 #else
 static inline void anonvma_external_refcount_init(struct anon_vma *anon_vma)
 {
@@ -89,6 +97,14 @@ static inline int anonvma_external_refcount(struct anon_vma *anon_vma)
 {
 	return 0;
 }
+
+static inline void get_anon_vma(struct anon_vma *anon_vma)
+{
+}
+
+static inline void drop_anon_vma(struct anon_vma *anon_vma)
+{
+}
 #endif /* CONFIG_KSM */
 
 static inline struct anon_vma *page_anon_vma(struct page *page)
@@ -99,18 +115,28 @@ static inline struct anon_vma *page_anon_vma(struct page *page)
 	return page_rmapping(page);
 }
 
-static inline void anon_vma_lock(struct vm_area_struct *vma)
+static inline void vma_lock_anon_vma(struct vm_area_struct *vma)
 {
 	struct anon_vma *anon_vma = vma->anon_vma;
 	if (anon_vma)
-		spin_lock(&anon_vma->lock);
+		spin_lock(&anon_vma->root->lock);
 }
 
-static inline void anon_vma_unlock(struct vm_area_struct *vma)
+static inline void vma_unlock_anon_vma(struct vm_area_struct *vma)
 {
 	struct anon_vma *anon_vma = vma->anon_vma;
 	if (anon_vma)
-		spin_unlock(&anon_vma->lock);
+		spin_unlock(&anon_vma->root->lock);
+}
+
+static inline void anon_vma_lock(struct anon_vma *anon_vma)
+{
+	spin_lock(&anon_vma->root->lock);
+}
+
+static inline void anon_vma_unlock(struct anon_vma *anon_vma)
+{
+	spin_unlock(&anon_vma->root->lock);
 }
 
 /*
@@ -136,6 +162,8 @@ static inline void anon_vma_merge(struct vm_area_struct *vma,
  */
 void page_move_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
 void page_add_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
+void do_page_add_anon_rmap(struct page *, struct vm_area_struct *,
+			   unsigned long, int);
 void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned long);
 void page_add_file_rmap(struct page *);
 void page_remove_rmap(struct page *);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 0478888c689..ce160d68f5e 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -272,19 +272,10 @@ extern int runqueue_is_locked(int cpu);
 
 extern cpumask_var_t nohz_cpu_mask;
 #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ)
-extern int select_nohz_load_balancer(int cpu);
-extern int get_nohz_load_balancer(void);
-extern int nohz_ratelimit(int cpu);
+extern void select_nohz_load_balancer(int stop_tick);
+extern int get_nohz_timer_target(void);
 #else
-static inline int select_nohz_load_balancer(int cpu)
-{
-	return 0;
-}
-
-static inline int nohz_ratelimit(int cpu)
-{
-	return 0;
-}
+static inline void select_nohz_load_balancer(int stop_tick) { }
 #endif
 
 /*
@@ -316,20 +307,16 @@ extern void scheduler_tick(void);
 
 extern void sched_show_task(struct task_struct *p);
 
-#ifdef CONFIG_DETECT_SOFTLOCKUP
-extern void softlockup_tick(void);
+#ifdef CONFIG_LOCKUP_DETECTOR
 extern void touch_softlockup_watchdog(void);
 extern void touch_softlockup_watchdog_sync(void);
 extern void touch_all_softlockup_watchdogs(void);
-extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
-				    void __user *buffer,
-				    size_t *lenp, loff_t *ppos);
+extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
+				  void __user *buffer,
+				  size_t *lenp, loff_t *ppos);
 extern unsigned int  softlockup_panic;
 extern int softlockup_thresh;
 #else
-static inline void softlockup_tick(void)
-{
-}
 static inline void touch_softlockup_watchdog(void)
 {
 }
@@ -634,7 +621,8 @@ struct signal_struct {
 	struct tty_audit_buf *tty_audit_buf;
 #endif
 
-	int oom_adj;	/* OOM kill score adjustment (bit shift) */
+	int oom_adj;		/* OOM kill score adjustment (bit shift) */
+	int oom_score_adj;	/* OOM kill score adjustment */
 };
 
 /* Context switch must be unlocked if interrupts are to be enabled */
@@ -805,7 +793,7 @@ enum cpu_idle_type {
 #define SD_POWERSAVINGS_BALANCE	0x0100	/* Balance for power savings */
 #define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share cpu pkg resources */
 #define SD_SERIALIZE		0x0400	/* Only a single load balancing instance */
-
+#define SD_ASYM_PACKING		0x0800  /* Place busy groups earlier in the domain */
 #define SD_PREFER_SIBLING	0x1000	/* Prefer to place tasks in a sibling domain */
 
 enum powersavings_balance_level {
@@ -840,6 +828,8 @@ static inline int sd_balance_for_package_power(void)
 	return SD_PREFER_SIBLING;
 }
 
+extern int __weak arch_sd_sibiling_asym_packing(void);
+
 /*
  * Optimise SD flags for power savings:
  * SD_BALANCE_NEWIDLE helps agressive task consolidation and power savings.
@@ -861,7 +851,7 @@ struct sched_group {
 	 * CPU power of this group, SCHED_LOAD_SCALE being max power for a
 	 * single CPU.
 	 */
-	unsigned int cpu_power;
+	unsigned int cpu_power, cpu_power_orig;
 
 	/*
 	 * The CPUs this group covers.
@@ -1697,6 +1687,7 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
+#define PF_WQ_WORKER	0x00000020	/* I'm a workqueue worker */
 #define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
 #define PF_MCE_PROCESS  0x00000080      /* process policy on mce errors */
 #define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
@@ -1791,20 +1782,23 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
 #endif
 
 /*
- * Architectures can set this to 1 if they have specified
- * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig,
- * but then during bootup it turns out that sched_clock()
- * is reliable after all:
+ * Do not use outside of architecture code which knows its limitations.
+ *
+ * sched_clock() has no promise of monotonicity or bounded drift between
+ * CPUs, use (which you should not) requires disabling IRQs.
+ *
+ * Please use one of the three interfaces below.
  */
-#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
-extern int sched_clock_stable;
-#endif
-
-/* ftrace calls sched_clock() directly */
 extern unsigned long long notrace sched_clock(void);
+/*
+ * See the comment in kernel/sched_clock.c
+ */
+extern u64 cpu_clock(int cpu);
+extern u64 local_clock(void);
+extern u64 sched_clock_cpu(int cpu);
+
 
 extern void sched_clock_init(void);
-extern u64 sched_clock_cpu(int cpu);
 
 #ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 static inline void sched_clock_tick(void)
@@ -1819,17 +1813,19 @@ static inline void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
 }
 #else
+/*
+ * Architectures can set this to 1 if they have specified
+ * CONFIG_HAVE_UNSTABLE_SCHED_CLOCK in their arch Kconfig,
+ * but then during bootup it turns out that sched_clock()
+ * is reliable after all:
+ */
+extern int sched_clock_stable;
+
 extern void sched_clock_tick(void);
 extern void sched_clock_idle_sleep_event(void);
 extern void sched_clock_idle_wakeup_event(u64 delta_ns);
 #endif
 
-/*
- * For kernel-internal use: high-speed (but slightly incorrect) per-cpu
- * clock constructed from sched_clock():
- */
-extern unsigned long long cpu_clock(int cpu);
-
 extern unsigned long long
 task_sched_runtime(struct task_struct *task);
 extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
@@ -2435,18 +2431,6 @@ static inline void set_task_cpu(struct task_struct *p, unsigned int cpu)
 
 #endif /* CONFIG_SMP */
 
-#ifdef CONFIG_TRACING
-extern void
-__trace_special(void *__tr, void *__data,
-		unsigned long arg1, unsigned long arg2, unsigned long arg3);
-#else
-static inline void
-__trace_special(void *__tr, void *__data,
-		unsigned long arg1, unsigned long arg2, unsigned long arg3)
-{
-}
-#endif
-
 extern long sched_setaffinity(pid_t pid, const struct cpumask *new_mask);
 extern long sched_getaffinity(pid_t pid, struct cpumask *mask);
 
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index e164291fb3e..399be5ad2f9 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -3,6 +3,7 @@
 
 #include <linux/swap.h>
 #include <linux/mempolicy.h>
+#include <linux/percpu_counter.h>
 
 /* inode in-kernel data */
 
@@ -23,7 +24,7 @@ struct shmem_inode_info {
 
 struct shmem_sb_info {
 	unsigned long max_blocks;   /* How many blocks are allowed */
-	unsigned long free_blocks;  /* How many are left for allocation */
+	struct percpu_counter used_blocks;  /* How many are allocated */
 	unsigned long max_inodes;   /* How many inodes are allowed */
 	unsigned long free_inodes;  /* How many are left for allocation */
 	spinlock_t stat_lock;	    /* Serialize shmem_sb_info changes */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index d20d9e7a9bb..77eb60d2b49 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1379,6 +1379,11 @@ static inline int skb_network_offset(const struct sk_buff *skb)
 	return skb_network_header(skb) - skb->data;
 }
 
+static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len)
+{
+	return pskb_may_pull(skb, skb_network_offset(skb) + len);
+}
+
 /*
  * CPUs often take a performance hit when accessing unaligned memory
  * locations. The actual performance hit varies, it can be small if the
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 49d1247cd6d..59260e21bdf 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -268,7 +268,8 @@ static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
  * allocator where we care about the real place the memory allocation
  * request comes from.
  */
-#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB)
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
+	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
 extern void *__kmalloc_track_caller(size_t, gfp_t, unsigned long);
 #define kmalloc_track_caller(size, flags) \
 	__kmalloc_track_caller(size, flags, _RET_IP_)
@@ -286,7 +287,8 @@ extern void *__kmalloc_track_caller(size_t, gfp_t, unsigned long);
  * standard allocator where we care about the real place the memory
  * allocation request comes from.
  */
-#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB)
+#if defined(CONFIG_DEBUG_SLAB) || defined(CONFIG_SLUB) || \
+	(defined(CONFIG_SLAB) && defined(CONFIG_TRACING))
 extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, unsigned long);
 #define kmalloc_node_track_caller(size, flags, node) \
 	__kmalloc_node_track_caller(size, flags, node, \
diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h
index 1812dac8c49..1acfa73ce2a 100644
--- a/include/linux/slab_def.h
+++ b/include/linux/slab_def.h
@@ -14,7 +14,8 @@
 #include <asm/page.h>		/* kmalloc_sizes.h needs PAGE_SIZE */
 #include <asm/cache.h>		/* kmalloc_sizes.h needs L1_CACHE_BYTES */
 #include <linux/compiler.h>
-#include <linux/kmemtrace.h>
+
+#include <trace/events/kmem.h>
 
 #ifndef ARCH_KMALLOC_MINALIGN
 /*
diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h
deleted file mode 100644
index 13337bf6c3f..00000000000
--- a/include/linux/slow-work.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Worker thread pool for slow items, such as filesystem lookups or mkdirs
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- * See Documentation/slow-work.txt
- */
-
-#ifndef _LINUX_SLOW_WORK_H
-#define _LINUX_SLOW_WORK_H
-
-#ifdef CONFIG_SLOW_WORK
-
-#include <linux/sysctl.h>
-#include <linux/timer.h>
-
-struct slow_work;
-#ifdef CONFIG_SLOW_WORK_DEBUG
-struct seq_file;
-#endif
-
-/*
- * The operations used to support slow work items
- */
-struct slow_work_ops {
-	/* owner */
-	struct module *owner;
-
-	/* get a ref on a work item
-	 * - return 0 if successful, -ve if not
-	 */
-	int (*get_ref)(struct slow_work *work);
-
-	/* discard a ref to a work item */
-	void (*put_ref)(struct slow_work *work);
-
-	/* execute a work item */
-	void (*execute)(struct slow_work *work);
-
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	/* describe a work item for debugfs */
-	void (*desc)(struct slow_work *work, struct seq_file *m);
-#endif
-};
-
-/*
- * A slow work item
- * - A reference is held on the parent object by the thread pool when it is
- *   queued
- */
-struct slow_work {
-	struct module		*owner;	/* the owning module */
-	unsigned long		flags;
-#define SLOW_WORK_PENDING	0	/* item pending (further) execution */
-#define SLOW_WORK_EXECUTING	1	/* item currently executing */
-#define SLOW_WORK_ENQ_DEFERRED	2	/* item enqueue deferred */
-#define SLOW_WORK_VERY_SLOW	3	/* item is very slow */
-#define SLOW_WORK_CANCELLING	4	/* item is being cancelled, don't enqueue */
-#define SLOW_WORK_DELAYED	5	/* item is struct delayed_slow_work with active timer */
-	const struct slow_work_ops *ops; /* operations table for this item */
-	struct list_head	link;	/* link in queue */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	struct timespec		mark;	/* jiffies at which queued or exec begun */
-#endif
-};
-
-struct delayed_slow_work {
-	struct slow_work	work;
-	struct timer_list	timer;
-};
-
-/**
- * slow_work_init - Initialise a slow work item
- * @work: The work item to initialise
- * @ops: The operations to use to handle the slow work item
- *
- * Initialise a slow work item.
- */
-static inline void slow_work_init(struct slow_work *work,
-				  const struct slow_work_ops *ops)
-{
-	work->flags = 0;
-	work->ops = ops;
-	INIT_LIST_HEAD(&work->link);
-}
-
-/**
- * slow_work_init - Initialise a delayed slow work item
- * @work: The work item to initialise
- * @ops: The operations to use to handle the slow work item
- *
- * Initialise a delayed slow work item.
- */
-static inline void delayed_slow_work_init(struct delayed_slow_work *dwork,
-					  const struct slow_work_ops *ops)
-{
-	init_timer(&dwork->timer);
-	slow_work_init(&dwork->work, ops);
-}
-
-/**
- * vslow_work_init - Initialise a very slow work item
- * @work: The work item to initialise
- * @ops: The operations to use to handle the slow work item
- *
- * Initialise a very slow work item.  This item will be restricted such that
- * only a certain number of the pool threads will be able to execute items of
- * this type.
- */
-static inline void vslow_work_init(struct slow_work *work,
-				   const struct slow_work_ops *ops)
-{
-	work->flags = 1 << SLOW_WORK_VERY_SLOW;
-	work->ops = ops;
-	INIT_LIST_HEAD(&work->link);
-}
-
-/**
- * slow_work_is_queued - Determine if a slow work item is on the work queue
- * work: The work item to test
- *
- * Determine if the specified slow-work item is on the work queue.  This
- * returns true if it is actually on the queue.
- *
- * If the item is executing and has been marked for requeue when execution
- * finishes, then false will be returned.
- *
- * Anyone wishing to wait for completion of execution can wait on the
- * SLOW_WORK_EXECUTING bit.
- */
-static inline bool slow_work_is_queued(struct slow_work *work)
-{
-	unsigned long flags = work->flags;
-	return flags & SLOW_WORK_PENDING && !(flags & SLOW_WORK_EXECUTING);
-}
-
-extern int slow_work_enqueue(struct slow_work *work);
-extern void slow_work_cancel(struct slow_work *work);
-extern int slow_work_register_user(struct module *owner);
-extern void slow_work_unregister_user(struct module *owner);
-
-extern int delayed_slow_work_enqueue(struct delayed_slow_work *dwork,
-				     unsigned long delay);
-
-static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork)
-{
-	slow_work_cancel(&dwork->work);
-}
-
-extern bool slow_work_sleep_till_thread_needed(struct slow_work *work,
-					       signed long *_timeout);
-
-#ifdef CONFIG_SYSCTL
-extern ctl_table slow_work_sysctls[];
-#endif
-
-#endif /* CONFIG_SLOW_WORK */
-#endif /* _LINUX_SLOW_WORK_H */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 4ba59cfc1f7..6447a723ecb 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -10,9 +10,10 @@
 #include <linux/gfp.h>
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
-#include <linux/kmemtrace.h>
 #include <linux/kmemleak.h>
 
+#include <trace/events/kmem.h>
+
 enum stat_item {
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
 	ALLOC_SLOWPATH,		/* Allocation by getting a new cpu slab */
diff --git a/include/linux/sunrpc/auth.h b/include/linux/sunrpc/auth.h
index 87d7ec0bf77..5bbc447175d 100644
--- a/include/linux/sunrpc/auth.h
+++ b/include/linux/sunrpc/auth.h
@@ -61,13 +61,7 @@ struct rpc_cred {
 /*
  * Client authentication handle
  */
-#define RPC_CREDCACHE_HASHBITS	4
-#define RPC_CREDCACHE_NR	(1 << RPC_CREDCACHE_HASHBITS)
-struct rpc_cred_cache {
-	struct hlist_head	hashtable[RPC_CREDCACHE_NR];
-	spinlock_t		lock;
-};
-
+struct rpc_cred_cache;
 struct rpc_authops;
 struct rpc_auth {
 	unsigned int		au_cslack;	/* call cred size estimate */
@@ -112,7 +106,7 @@ struct rpc_credops {
 	void			(*crdestroy)(struct rpc_cred *);
 
 	int			(*crmatch)(struct auth_cred *, struct rpc_cred *, int);
-	void			(*crbind)(struct rpc_task *, struct rpc_cred *, int);
+	struct rpc_cred *	(*crbind)(struct rpc_task *, struct rpc_cred *, int);
 	__be32 *		(*crmarshal)(struct rpc_task *, __be32 *);
 	int			(*crrefresh)(struct rpc_task *);
 	__be32 *		(*crvalidate)(struct rpc_task *, __be32 *);
@@ -125,11 +119,12 @@ struct rpc_credops {
 extern const struct rpc_authops	authunix_ops;
 extern const struct rpc_authops	authnull_ops;
 
-void __init		rpc_init_authunix(void);
-void __init		rpc_init_generic_auth(void);
-void __init		rpcauth_init_module(void);
+int __init		rpc_init_authunix(void);
+int __init		rpc_init_generic_auth(void);
+int __init		rpcauth_init_module(void);
 void __exit		rpcauth_remove_module(void);
 void __exit		rpc_destroy_generic_auth(void);
+void 			rpc_destroy_authunix(void);
 
 struct rpc_cred *	rpc_lookup_cred(void);
 struct rpc_cred *	rpc_lookup_machine_cred(void);
@@ -140,10 +135,8 @@ void			rpcauth_release(struct rpc_auth *);
 struct rpc_cred *	rpcauth_lookup_credcache(struct rpc_auth *, struct auth_cred *, int);
 void			rpcauth_init_cred(struct rpc_cred *, const struct auth_cred *, struct rpc_auth *, const struct rpc_credops *);
 struct rpc_cred *	rpcauth_lookupcred(struct rpc_auth *, int);
-void			rpcauth_bindcred(struct rpc_task *, struct rpc_cred *, int);
-void			rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *, int);
+struct rpc_cred *	rpcauth_generic_bind_cred(struct rpc_task *, struct rpc_cred *, int);
 void			put_rpccred(struct rpc_cred *);
-void			rpcauth_unbindcred(struct rpc_task *);
 __be32 *		rpcauth_marshcred(struct rpc_task *, __be32 *);
 __be32 *		rpcauth_checkverf(struct rpc_task *, __be32 *);
 int			rpcauth_wrap_req(struct rpc_task *task, kxdrproc_t encode, void *rqstp, __be32 *data, void *obj);
diff --git a/include/linux/sunrpc/cache.h b/include/linux/sunrpc/cache.h
index 6f52b4d7c44..7bf3e84b92f 100644
--- a/include/linux/sunrpc/cache.h
+++ b/include/linux/sunrpc/cache.h
@@ -192,6 +192,7 @@ extern int cache_check(struct cache_detail *detail,
 extern void cache_flush(void);
 extern void cache_purge(struct cache_detail *detail);
 #define NEVER (0x7FFFFFFF)
+extern void __init cache_initialize(void);
 extern int cache_register(struct cache_detail *cd);
 extern void cache_unregister(struct cache_detail *cd);
 
diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 8ed9642a5a7..569dc722a60 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -131,6 +131,7 @@ struct rpc_clnt	*rpc_bind_new_program(struct rpc_clnt *,
 struct rpc_clnt *rpc_clone_client(struct rpc_clnt *);
 void		rpc_shutdown_client(struct rpc_clnt *);
 void		rpc_release_client(struct rpc_clnt *);
+void		rpc_task_release_client(struct rpc_task *);
 
 int		rpcb_register(u32, u32, int, unsigned short);
 int		rpcb_v4_register(const u32 program, const u32 version,
@@ -148,8 +149,8 @@ int		rpc_call_sync(struct rpc_clnt *clnt,
 			      const struct rpc_message *msg, int flags);
 struct rpc_task *rpc_call_null(struct rpc_clnt *clnt, struct rpc_cred *cred,
 			       int flags);
-void		rpc_restart_call_prepare(struct rpc_task *);
-void		rpc_restart_call(struct rpc_task *);
+int		rpc_restart_call_prepare(struct rpc_task *);
+int		rpc_restart_call(struct rpc_task *);
 void		rpc_setbufsize(struct rpc_clnt *, unsigned int, unsigned int);
 size_t		rpc_max_payload(struct rpc_clnt *);
 void		rpc_force_rebind(struct rpc_clnt *);
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 7be4f3a6d24..88513fd8e20 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -213,6 +213,7 @@ struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
 				const struct rpc_call_ops *ops);
 void		rpc_put_task(struct rpc_task *);
 void		rpc_exit_task(struct rpc_task *);
+void		rpc_exit(struct rpc_task *, int);
 void		rpc_release_calldata(const struct rpc_call_ops *, void *);
 void		rpc_killall_tasks(struct rpc_clnt *);
 void		rpc_execute(struct rpc_task *);
@@ -241,12 +242,6 @@ void		rpc_destroy_mempool(void);
 extern struct workqueue_struct *rpciod_workqueue;
 void		rpc_prepare_task(struct rpc_task *task);
 
-static inline void rpc_exit(struct rpc_task *task, int status)
-{
-	task->tk_status = status;
-	task->tk_action = rpc_exit_task;
-}
-
 static inline int rpc_wait_for_completion_task(struct rpc_task *task)
 {
 	return __rpc_wait_for_completion_task(task, NULL);
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index b5147030239..ff5a77b28c5 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -64,6 +64,7 @@ struct rpc_rqst {
 	 * This is the private part
 	 */
 	struct rpc_task *	rq_task;	/* RPC task data */
+	struct rpc_cred *	rq_cred;	/* Bound cred */
 	__be32			rq_xid;		/* request XID */
 	int			rq_cong;	/* has incremented xprt->cong */
 	u32			rq_seqno;	/* gss seq no. used on req. */
diff --git a/include/linux/swap.h b/include/linux/swap.h
index ff4acea9bbd..91c9d3fc851 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -316,7 +316,6 @@ extern long nr_swap_pages;
 extern long total_swap_pages;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
-extern swp_entry_t get_swap_page_of_type(int);
 extern int valid_swaphandles(swp_entry_t, unsigned long *);
 extern int add_swap_count_continuation(swp_entry_t, gfp_t);
 extern void swap_shmem_alloc(swp_entry_t);
@@ -333,6 +332,13 @@ extern int reuse_swap_page(struct page *);
 extern int try_to_free_swap(struct page *);
 struct backing_dev_info;
 
+#ifdef CONFIG_HIBERNATION
+void hibernation_freeze_swap(void);
+void hibernation_thaw_swap(void);
+swp_entry_t get_swap_for_hibernation(int type);
+void swap_free_for_hibernation(swp_entry_t val);
+#endif
+
 /* linux/mm/thrash.c */
 extern struct mm_struct *swap_token_mm;
 extern void grab_swap_token(struct mm_struct *);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 13ebb5413a7..a6bfd1367d2 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -167,7 +167,6 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 		.enter_event	= &event_enter_##sname,		\
 		.exit_event	= &event_exit_##sname,		\
 		.enter_fields	= LIST_HEAD_INIT(__syscall_meta_##sname.enter_fields), \
-		.exit_fields	= LIST_HEAD_INIT(__syscall_meta_##sname.exit_fields), \
 	};
 
 #define SYSCALL_DEFINE0(sname)					\
@@ -182,7 +181,6 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 		.enter_event	= &event_enter__##sname,	\
 		.exit_event	= &event_exit__##sname,		\
 		.enter_fields	= LIST_HEAD_INIT(__syscall_meta__##sname.enter_fields), \
-		.exit_fields	= LIST_HEAD_INIT(__syscall_meta__##sname.exit_fields), \
 	};							\
 	asmlinkage long sys_##sname(void)
 #else
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index f2694eb4dd3..3c92121ba9a 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -22,14 +22,8 @@ struct kobject;
 struct module;
 enum kobj_ns_type;
 
-/* FIXME
- * The *owner field is no longer used.
- * x86 tree has been cleaned up. The owner
- * attribute is still left for other arches.
- */
 struct attribute {
 	const char		*name;
-	struct module		*owner;
 	mode_t			mode;
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 	struct lock_class_key	*key;
@@ -136,8 +130,8 @@ int __must_check sysfs_create_file(struct kobject *kobj,
 				   const struct attribute *attr);
 int __must_check sysfs_create_files(struct kobject *kobj,
 				   const struct attribute **attr);
-int __must_check sysfs_chmod_file(struct kobject *kobj, struct attribute *attr,
-				  mode_t mode);
+int __must_check sysfs_chmod_file(struct kobject *kobj,
+				  const struct attribute *attr, mode_t mode);
 void sysfs_remove_file(struct kobject *kobj, const struct attribute *attr);
 void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr);
 
@@ -225,7 +219,7 @@ static inline int sysfs_create_files(struct kobject *kobj,
 }
 
 static inline int sysfs_chmod_file(struct kobject *kobj,
-				   struct attribute *attr, mode_t mode)
+				   const struct attribute *attr, mode_t mode)
 {
 	return 0;
 }
diff --git a/include/linux/time.h b/include/linux/time.h
index ea3559f0b3f..cb34e35faba 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -76,9 +76,25 @@ extern unsigned long mktime(const unsigned int year, const unsigned int mon,
 			    const unsigned int min, const unsigned int sec);
 
 extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
+
+/*
+ * timespec_add_safe assumes both values are positive and checks
+ * for overflow. It will return TIME_T_MAX if the reutrn would be
+ * smaller then either of the arguments.
+ */
 extern struct timespec timespec_add_safe(const struct timespec lhs,
 					 const struct timespec rhs);
 
+
+static inline struct timespec timespec_add(struct timespec lhs,
+						struct timespec rhs)
+{
+	struct timespec ts_delta;
+	set_normalized_timespec(&ts_delta, lhs.tv_sec + rhs.tv_sec,
+				lhs.tv_nsec + rhs.tv_nsec);
+	return ts_delta;
+}
+
 /*
  * sub = lhs - rhs, in normalized form
  */
@@ -97,8 +113,6 @@ static inline struct timespec timespec_sub(struct timespec lhs,
 #define timespec_valid(ts) \
 	(((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC))
 
-extern struct timespec xtime;
-extern struct timespec wall_to_monotonic;
 extern seqlock_t xtime_lock;
 
 extern void read_persistent_clock(struct timespec *ts);
@@ -110,7 +124,8 @@ extern int timekeeping_suspended;
 
 unsigned long get_seconds(void);
 struct timespec current_kernel_time(void);
-struct timespec __current_kernel_time(void); /* does not hold xtime_lock */
+struct timespec __current_kernel_time(void); /* does not take xtime_lock */
+struct timespec __get_wall_to_monotonic(void); /* does not take xtime_lock */
 struct timespec get_monotonic_coarse(void);
 
 #define CURRENT_TIME		(current_kernel_time())
diff --git a/include/linux/topology.h b/include/linux/topology.h
index c44df50a05a..64e084ff5e5 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -103,6 +103,7 @@ int arch_update_cpu_topology(void);
 				| 1*SD_SHARE_PKG_RESOURCES		\
 				| 0*SD_SERIALIZE			\
 				| 0*SD_PREFER_SIBLING			\
+				| arch_sd_sibling_asym_packing()	\
 				,					\
 	.last_balance		= jiffies,				\
 	.balance_interval	= 1,					\
@@ -291,10 +292,6 @@ static inline void set_cpu_numa_mem(int cpu, int node)
 
 #else	/* !CONFIG_HAVE_MEMORYLESS_NODES */
 
-static inline void set_numa_mem(int node) {}
-
-static inline void set_cpu_numa_mem(int cpu, int node) {}
-
 #ifndef numa_mem_id
 /* Returns the number of the nearest Node with memory */
 static inline int numa_mem_id(void)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 931078b7322..7802a243ee1 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -552,6 +552,9 @@ static inline void tty_audit_push_task(struct task_struct *tsk,
 }
 #endif
 
+/* tty_io.c */
+extern int __init tty_init(void);
+
 /* tty_ioctl.c */
 extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file,
 		       unsigned int cmd, unsigned long arg);
diff --git a/include/linux/types.h b/include/linux/types.h
index 331d8baabcf..01a082f56ef 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -200,6 +200,18 @@ typedef struct {
 } atomic64_t;
 #endif
 
+struct list_head {
+	struct list_head *next, *prev;
+};
+
+struct hlist_head {
+	struct hlist_node *first;
+};
+
+struct hlist_node {
+	struct hlist_node *next, **pprev;
+};
+
 struct ustat {
 	__kernel_daddr_t	f_tfree;
 	__kernel_ino_t		f_tinode;
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 383b94ba8c2..964cb603f7c 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -18,6 +18,21 @@
 /* v1.0 and v2.0 of this standard have many things in common. For the rest
  * of the definitions, please refer to audio.h */
 
+/*
+ * bmControl field decoders
+ *
+ * From the USB Audio spec v2.0:
+ *
+ *   bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
+ *   each containing a set of bit pairs. If a Control is present,
+ *   it must be Host readable. If a certain Control is not
+ *   present then the bit pair must be set to 0b00.
+ *   If a Control is present but read-only, the bit pair must be
+ *   set to 0b01. If a Control is also Host programmable, the bit
+ *   pair must be set to 0b11. The value 0b10 is not allowed.
+ *
+ */
+
 static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
 {
 	return (bmControls >> (control * 2)) & 0x1;
@@ -121,7 +136,7 @@ struct uac2_feature_unit_descriptor {
 
 /* 4.9.2 Class-Specific AS Interface Descriptor */
 
-struct uac_as_header_descriptor_v2 {
+struct uac2_as_header_descriptor {
 	__u8 bLength;
 	__u8 bDescriptorType;
 	__u8 bDescriptorSubtype;
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index c51200c715e..a54b8255d75 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -39,8 +39,8 @@
 #define UAC_MIXER_UNIT			0x04
 #define UAC_SELECTOR_UNIT		0x05
 #define UAC_FEATURE_UNIT		0x06
-#define UAC_PROCESSING_UNIT_V1		0x07
-#define UAC_EXTENSION_UNIT_V1		0x08
+#define UAC1_PROCESSING_UNIT		0x07
+#define UAC1_EXTENSION_UNIT		0x08
 
 /* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */
 #define UAC_AS_GENERAL			0x01
@@ -151,7 +151,7 @@
 
 /* Terminal Control Selectors */
 /* 4.3.2  Class-Specific AC Interface Descriptor */
-struct uac_ac_header_descriptor_v1 {
+struct uac1_ac_header_descriptor {
 	__u8  bLength;			/* 8 + n */
 	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
 	__u8  bDescriptorSubtype;	/* UAC_MS_HEADER */
@@ -165,7 +165,7 @@ struct uac_ac_header_descriptor_v1 {
 
 /* As above, but more useful for defining your own descriptors: */
 #define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n)			\
-struct uac_ac_header_descriptor_v1_##n {			\
+struct uac1_ac_header_descriptor_##n {			\
 	__u8  bLength;						\
 	__u8  bDescriptorType;					\
 	__u8  bDescriptorSubtype;				\
@@ -205,7 +205,7 @@ struct uac_input_terminal_descriptor {
 #define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL		0x01
 
 /* 4.3.2.2 Output Terminal Descriptor */
-struct uac_output_terminal_descriptor_v1 {
+struct uac1_output_terminal_descriptor {
 	__u8  bLength;			/* in bytes: 9 */
 	__u8  bDescriptorType;		/* CS_INTERFACE descriptor type */
 	__u8  bDescriptorSubtype;	/* OUTPUT_TERMINAL descriptor subtype */
@@ -395,7 +395,7 @@ static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_desc
 }
 
 /* 4.5.2 Class-Specific AS Interface Descriptor */
-struct uac_as_header_descriptor_v1 {
+struct uac1_as_header_descriptor {
 	__u8  bLength;			/* in bytes: 7 */
 	__u8  bDescriptorType;		/* USB_DT_CS_INTERFACE */
 	__u8  bDescriptorSubtype;	/* AS_GENERAL */
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 227c2a585e4..de05e96e0a7 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -30,7 +30,7 @@ struct vm_struct {
 	unsigned long		flags;
 	struct page		**pages;
 	unsigned int		nr_pages;
-	unsigned long		phys_addr;
+	phys_addr_t		phys_addr;
 	void			*caller;
 };
 
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 9466e860d8c..4f9d277bcd9 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -9,6 +9,7 @@
 #include <linux/linkage.h>
 #include <linux/bitops.h>
 #include <linux/lockdep.h>
+#include <linux/threads.h>
 #include <asm/atomic.h>
 
 struct workqueue_struct;
@@ -22,12 +23,59 @@ typedef void (*work_func_t)(struct work_struct *work);
  */
 #define work_data_bits(work) ((unsigned long *)(&(work)->data))
 
+enum {
+	WORK_STRUCT_PENDING_BIT	= 0,	/* work item is pending execution */
+	WORK_STRUCT_CWQ_BIT	= 1,	/* data points to cwq */
+	WORK_STRUCT_LINKED_BIT	= 2,	/* next work is linked to this one */
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+	WORK_STRUCT_STATIC_BIT	= 3,	/* static initializer (debugobjects) */
+	WORK_STRUCT_COLOR_SHIFT	= 4,	/* color for workqueue flushing */
+#else
+	WORK_STRUCT_COLOR_SHIFT	= 3,	/* color for workqueue flushing */
+#endif
+
+	WORK_STRUCT_COLOR_BITS	= 4,
+
+	WORK_STRUCT_PENDING	= 1 << WORK_STRUCT_PENDING_BIT,
+	WORK_STRUCT_CWQ		= 1 << WORK_STRUCT_CWQ_BIT,
+	WORK_STRUCT_LINKED	= 1 << WORK_STRUCT_LINKED_BIT,
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+	WORK_STRUCT_STATIC	= 1 << WORK_STRUCT_STATIC_BIT,
+#else
+	WORK_STRUCT_STATIC	= 0,
+#endif
+
+	/*
+	 * The last color is no color used for works which don't
+	 * participate in workqueue flushing.
+	 */
+	WORK_NR_COLORS		= (1 << WORK_STRUCT_COLOR_BITS) - 1,
+	WORK_NO_COLOR		= WORK_NR_COLORS,
+
+	/* special cpu IDs */
+	WORK_CPU_UNBOUND	= NR_CPUS,
+	WORK_CPU_NONE		= NR_CPUS + 1,
+	WORK_CPU_LAST		= WORK_CPU_NONE,
+
+	/*
+	 * Reserve 7 bits off of cwq pointer w/ debugobjects turned
+	 * off.  This makes cwqs aligned to 128 bytes which isn't too
+	 * excessive while allowing 15 workqueue flush colors.
+	 */
+	WORK_STRUCT_FLAG_BITS	= WORK_STRUCT_COLOR_SHIFT +
+				  WORK_STRUCT_COLOR_BITS,
+
+	WORK_STRUCT_FLAG_MASK	= (1UL << WORK_STRUCT_FLAG_BITS) - 1,
+	WORK_STRUCT_WQ_DATA_MASK = ~WORK_STRUCT_FLAG_MASK,
+	WORK_STRUCT_NO_CPU	= WORK_CPU_NONE << WORK_STRUCT_FLAG_BITS,
+
+	/* bit mask for work_busy() return values */
+	WORK_BUSY_PENDING	= 1 << 0,
+	WORK_BUSY_RUNNING	= 1 << 1,
+};
+
 struct work_struct {
 	atomic_long_t data;
-#define WORK_STRUCT_PENDING 0		/* T if work item pending execution */
-#define WORK_STRUCT_STATIC  1		/* static initializer (debugobjects) */
-#define WORK_STRUCT_FLAG_MASK (3UL)
-#define WORK_STRUCT_WQ_DATA_MASK (~WORK_STRUCT_FLAG_MASK)
 	struct list_head entry;
 	work_func_t func;
 #ifdef CONFIG_LOCKDEP
@@ -35,8 +83,9 @@ struct work_struct {
 #endif
 };
 
-#define WORK_DATA_INIT()	ATOMIC_LONG_INIT(0)
-#define WORK_DATA_STATIC_INIT()	ATOMIC_LONG_INIT(2)
+#define WORK_DATA_INIT()	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU)
+#define WORK_DATA_STATIC_INIT()	\
+	ATOMIC_LONG_INIT(WORK_STRUCT_NO_CPU | WORK_STRUCT_STATIC)
 
 struct delayed_work {
 	struct work_struct work;
@@ -96,9 +145,14 @@ struct execute_work {
 #ifdef CONFIG_DEBUG_OBJECTS_WORK
 extern void __init_work(struct work_struct *work, int onstack);
 extern void destroy_work_on_stack(struct work_struct *work);
+static inline unsigned int work_static(struct work_struct *work)
+{
+	return *work_data_bits(work) & WORK_STRUCT_STATIC;
+}
 #else
 static inline void __init_work(struct work_struct *work, int onstack) { }
 static inline void destroy_work_on_stack(struct work_struct *work) { }
+static inline unsigned int work_static(struct work_struct *work) { return 0; }
 #endif
 
 /*
@@ -162,7 +216,7 @@ static inline void destroy_work_on_stack(struct work_struct *work) { }
  * @work: The work item in question
  */
 #define work_pending(work) \
-	test_bit(WORK_STRUCT_PENDING, work_data_bits(work))
+	test_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
 
 /**
  * delayed_work_pending - Find out whether a delayable work item is currently
@@ -177,16 +231,56 @@ static inline void destroy_work_on_stack(struct work_struct *work) { }
  * @work: The work item in question
  */
 #define work_clear_pending(work) \
-	clear_bit(WORK_STRUCT_PENDING, work_data_bits(work))
+	clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
+
+enum {
+	WQ_NON_REENTRANT	= 1 << 0, /* guarantee non-reentrance */
+	WQ_UNBOUND		= 1 << 1, /* not bound to any cpu */
+	WQ_FREEZEABLE		= 1 << 2, /* freeze during suspend */
+	WQ_RESCUER		= 1 << 3, /* has an rescue worker */
+	WQ_HIGHPRI		= 1 << 4, /* high priority */
+	WQ_CPU_INTENSIVE	= 1 << 5, /* cpu instensive workqueue */
+
+	WQ_MAX_ACTIVE		= 512,	  /* I like 512, better ideas? */
+	WQ_MAX_UNBOUND_PER_CPU	= 4,	  /* 4 * #cpus for unbound wq */
+	WQ_DFL_ACTIVE		= WQ_MAX_ACTIVE / 2,
+};
 
+/* unbound wq's aren't per-cpu, scale max_active according to #cpus */
+#define WQ_UNBOUND_MAX_ACTIVE	\
+	max_t(int, WQ_MAX_ACTIVE, num_possible_cpus() * WQ_MAX_UNBOUND_PER_CPU)
+
+/*
+ * System-wide workqueues which are always present.
+ *
+ * system_wq is the one used by schedule[_delayed]_work[_on]().
+ * Multi-CPU multi-threaded.  There are users which expect relatively
+ * short queue flush time.  Don't queue works which can run for too
+ * long.
+ *
+ * system_long_wq is similar to system_wq but may host long running
+ * works.  Queue flushing might take relatively long.
+ *
+ * system_nrt_wq is non-reentrant and guarantees that any given work
+ * item is never executed in parallel by multiple CPUs.  Queue
+ * flushing might take relatively long.
+ *
+ * system_unbound_wq is unbound workqueue.  Workers are not bound to
+ * any specific CPU, not concurrency managed, and all queued works are
+ * executed immediately as long as max_active limit is not reached and
+ * resources are available.
+ */
+extern struct workqueue_struct *system_wq;
+extern struct workqueue_struct *system_long_wq;
+extern struct workqueue_struct *system_nrt_wq;
+extern struct workqueue_struct *system_unbound_wq;
 
 extern struct workqueue_struct *
-__create_workqueue_key(const char *name, int singlethread,
-		       int freezeable, int rt, struct lock_class_key *key,
-		       const char *lock_name);
+__alloc_workqueue_key(const char *name, unsigned int flags, int max_active,
+		      struct lock_class_key *key, const char *lock_name);
 
 #ifdef CONFIG_LOCKDEP
-#define __create_workqueue(name, singlethread, freezeable, rt)	\
+#define alloc_workqueue(name, flags, max_active)		\
 ({								\
 	static struct lock_class_key __key;			\
 	const char *__lock_name;				\
@@ -196,20 +290,20 @@ __create_workqueue_key(const char *name, int singlethread,
 	else							\
 		__lock_name = #name;				\
 								\
-	__create_workqueue_key((name), (singlethread),		\
-			       (freezeable), (rt), &__key,	\
-			       __lock_name);			\
+	__alloc_workqueue_key((name), (flags), (max_active),	\
+			      &__key, __lock_name);		\
 })
 #else
-#define __create_workqueue(name, singlethread, freezeable, rt)	\
-	__create_workqueue_key((name), (singlethread), (freezeable), (rt), \
-			       NULL, NULL)
+#define alloc_workqueue(name, flags, max_active)		\
+	__alloc_workqueue_key((name), (flags), (max_active), NULL, NULL)
 #endif
 
-#define create_workqueue(name) __create_workqueue((name), 0, 0, 0)
-#define create_rt_workqueue(name) __create_workqueue((name), 0, 0, 1)
-#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1, 0)
-#define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0, 0)
+#define create_workqueue(name)					\
+	alloc_workqueue((name), WQ_RESCUER, 1)
+#define create_freezeable_workqueue(name)			\
+	alloc_workqueue((name), WQ_FREEZEABLE | WQ_UNBOUND | WQ_RESCUER, 1)
+#define create_singlethread_workqueue(name)			\
+	alloc_workqueue((name), WQ_UNBOUND | WQ_RESCUER, 1)
 
 extern void destroy_workqueue(struct workqueue_struct *wq);
 
@@ -231,16 +325,19 @@ extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay)
 extern int schedule_delayed_work_on(int cpu, struct delayed_work *work,
 					unsigned long delay);
 extern int schedule_on_each_cpu(work_func_t func);
-extern int current_is_keventd(void);
 extern int keventd_up(void);
 
-extern void init_workqueues(void);
 int execute_in_process_context(work_func_t fn, struct execute_work *);
 
 extern int flush_work(struct work_struct *work);
-
 extern int cancel_work_sync(struct work_struct *work);
 
+extern void workqueue_set_max_active(struct workqueue_struct *wq,
+				     int max_active);
+extern bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq);
+extern unsigned int work_cpu(struct work_struct *work);
+extern unsigned int work_busy(struct work_struct *work);
+
 /*
  * Kill off a pending schedule_delayed_work().  Note that the work callback
  * function may still be running on return from cancel_delayed_work(), unless
@@ -297,4 +394,15 @@ static inline long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
 #else
 long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg);
 #endif /* CONFIG_SMP */
+
+#ifdef CONFIG_FREEZER
+extern void freeze_workqueues_begin(void);
+extern bool freeze_workqueues_busy(void);
+extern void thaw_workqueues(void);
+#endif /* CONFIG_FREEZER */
+
+#ifdef CONFIG_LOCKDEP
+int in_workqueue_context(struct workqueue_struct *wq);
+#endif
+
 #endif
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 8b28962e737..4568b938ca3 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -132,7 +132,7 @@ struct hci_dev {
 
 	struct inquiry_cache	inq_cache;
 	struct hci_conn_hash	conn_hash;
-	struct bdaddr_list	blacklist;
+	struct list_head	blacklist;
 
 	struct hci_dev_stats	stat;
 
diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h
index cfdd5af77dc..1c5088c9f7b 100644
--- a/include/pcmcia/cistpl.h
+++ b/include/pcmcia/cistpl.h
@@ -15,6 +15,8 @@
 #ifndef _LINUX_CISTPL_H
 #define _LINUX_CISTPL_H
 
+typedef unsigned char cisdata_t;
+
 #define CISTPL_NULL		0x00
 #define CISTPL_DEVICE		0x01
 #define CISTPL_LONGLINK_CB	0x02
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 57d8d039356..68d8bde7e8d 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -19,44 +19,6 @@
 #include <linux/interrupt.h>
 #endif
 
-/* For AccessConfigurationRegister */
-typedef struct conf_reg_t {
-    u_char	Function;
-    u_int	Action;
-    off_t	Offset;
-    u_int	Value;
-} conf_reg_t;
-
-/* Actions */
-#define CS_READ		1
-#define CS_WRITE	2
-
-/* for AdjustResourceInfo */
-/* Action field */
-#define REMOVE_MANAGED_RESOURCE		1
-#define ADD_MANAGED_RESOURCE		2
-
-
-typedef struct event_callback_args_t {
-	struct pcmcia_device	*client_handle;
-	void			*client_data;
-} event_callback_args_t;
-
-/* For CardValues field */
-#define CV_OPTION_VALUE		0x01
-#define CV_STATUS_VALUE		0x02
-#define CV_PIN_REPLACEMENT	0x04
-#define CV_COPY_VALUE		0x08
-#define CV_EXT_STATUS		0x10
-
-/* For GetFirst/NextClient */
-typedef struct client_req_t {
-    socket_t	Socket;
-    u_int	Attributes;
-} client_req_t;
-
-#define CLIENT_THIS_SOCKET	0x01
-
 /* ModifyConfiguration */
 typedef struct modconf_t {
     u_int	Attributes;
@@ -94,43 +56,6 @@ typedef struct config_req_t {
 #define INT_CARDBUS		0x04
 #define INT_ZOOMED_VIDEO	0x08
 
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
-    u_int	BasePort1;
-    u_int	NumPorts1;
-    u_int	Attributes1;
-    u_int	BasePort2;
-    u_int	NumPorts2;
-    u_int	Attributes2;
-    u_int	IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_SHARED		0x01
-#define IO_FIRST_SHARED		0x02
-#define IO_FORCE_ALIAS_ACCESS	0x04
-#define IO_DATA_PATH_WIDTH	0x18
-#define IO_DATA_PATH_WIDTH_8	0x00
-#define IO_DATA_PATH_WIDTH_16	0x08
-#define IO_DATA_PATH_WIDTH_AUTO	0x10
-
-/* Bits in IRQInfo1 field */
-#define IRQ_NMI_ID		0x01
-#define IRQ_IOCK_ID		0x02
-#define IRQ_BERR_ID		0x04
-#define IRQ_VEND_ID		0x08
-#define IRQ_INFO2_VALID		0x10
-#define IRQ_LEVEL_ID		0x20
-#define IRQ_PULSE_ID		0x40
-#define IRQ_SHARE_ID		0x80
-
-typedef struct eventmask_t {
-    u_int	Attributes;
-    u_int	EventMask;
-} eventmask_t;
-
-#define CONF_EVENT_MASK_VALID	0x01
-
 /* Configuration registers present */
 #define PRESENT_OPTION		0x001
 #define PRESENT_STATUS		0x002
@@ -143,18 +68,6 @@ typedef struct eventmask_t {
 #define PRESENT_IOBASE_3	0x100
 #define PRESENT_IOSIZE		0x200
 
-/* For GetMemPage, MapMemPage */
-typedef struct memreq_t {
-    u_int	CardOffset;
-    page_t	Page;
-} memreq_t;
-
-/* For ModifyWindow */
-typedef struct modwin_t {
-    u_int	Attributes;
-    u_int	AccessSpeed;
-} modwin_t;
-
 /* For RequestWindow */
 typedef struct win_req_t {
     u_int	Attributes;
@@ -164,61 +77,19 @@ typedef struct win_req_t {
 } win_req_t;
 
 /* Attributes for RequestWindow */
-#define WIN_ADDR_SPACE		0x0001
-#define WIN_ADDR_SPACE_MEM	0x0000
-#define WIN_ADDR_SPACE_IO	0x0001
-#define WIN_MEMORY_TYPE		0x0002
-#define WIN_MEMORY_TYPE_CM	0x0000
-#define WIN_MEMORY_TYPE_AM	0x0002
-#define WIN_ENABLE		0x0004
-#define WIN_DATA_WIDTH		0x0018
-#define WIN_DATA_WIDTH_8	0x0000
-#define WIN_DATA_WIDTH_16	0x0008
-#define WIN_DATA_WIDTH_32	0x0010
-#define WIN_PAGED		0x0020
-#define WIN_SHARED		0x0040
-#define WIN_FIRST_SHARED	0x0080
-#define WIN_USE_WAIT		0x0100
-#define WIN_STRICT_ALIGN	0x0200
-#define WIN_MAP_BELOW_1MB	0x0400
-#define WIN_PREFETCH		0x0800
-#define WIN_CACHEABLE		0x1000
-#define WIN_BAR_MASK		0xe000
-#define WIN_BAR_SHIFT		13
-
-typedef struct error_info_t {
-    int		func;
-    int		retcode;
-} error_info_t;
-
-/* Flag to bind to all functions */
-#define BIND_FN_ALL	0xff
-
-/* Events */
-#define CS_EVENT_PRI_LOW		0
-#define CS_EVENT_PRI_HIGH		1
-
-#define CS_EVENT_WRITE_PROTECT		0x000001
-#define CS_EVENT_CARD_LOCK		0x000002
-#define CS_EVENT_CARD_INSERTION		0x000004
-#define CS_EVENT_CARD_REMOVAL		0x000008
-#define CS_EVENT_BATTERY_DEAD		0x000010
-#define CS_EVENT_BATTERY_LOW		0x000020
-#define CS_EVENT_READY_CHANGE		0x000040
-#define CS_EVENT_CARD_DETECT		0x000080
-#define CS_EVENT_RESET_REQUEST		0x000100
-#define CS_EVENT_RESET_PHYSICAL		0x000200
-#define CS_EVENT_CARD_RESET		0x000400
-#define CS_EVENT_REGISTRATION_COMPLETE	0x000800
-#define CS_EVENT_PM_SUSPEND		0x002000
-#define CS_EVENT_PM_RESUME		0x004000
-#define CS_EVENT_INSERTION_REQUEST	0x008000
-#define CS_EVENT_EJECTION_REQUEST	0x010000
-#define CS_EVENT_MTD_REQUEST		0x020000
-#define CS_EVENT_ERASE_COMPLETE		0x040000
-#define CS_EVENT_REQUEST_ATTENTION	0x080000
-#define CS_EVENT_CB_DETECT		0x100000
-#define CS_EVENT_3VCARD			0x200000
-#define CS_EVENT_XVCARD			0x400000
+#define WIN_MEMORY_TYPE_CM	0x00 /* default */
+#define WIN_MEMORY_TYPE_AM	0x20 /* MAP_ATTRIB */
+#define WIN_DATA_WIDTH_8	0x00 /* default */
+#define WIN_DATA_WIDTH_16	0x02 /* MAP_16BIT */
+#define WIN_ENABLE		0x01 /* MAP_ACTIVE */
+#define WIN_USE_WAIT		0x40 /* MAP_USE_WAIT */
+
+#define WIN_FLAGS_MAP		0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE |
+					MAP_USE_WAIT */
+#define WIN_FLAGS_REQ		0x1c /* mapping to socket->win[i]:
+					0x04 -> 0
+					0x08 -> 1
+					0x0c -> 2
+					0x10 -> 3 */
 
 #endif /* _LINUX_CS_H */
diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
deleted file mode 100644
index f5e3b8386c8..00000000000
--- a/include/pcmcia/cs_types.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * cs_types.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * (C) 1999             David A. Hinds
- */
-
-#ifndef _LINUX_CS_TYPES_H
-#define _LINUX_CS_TYPES_H
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <sys/types.h>
-#endif
-
-typedef u_short	socket_t;
-typedef u_int	event_t;
-typedef u_char	cisdata_t;
-typedef u_short	page_t;
-
-typedef unsigned long window_handle_t;
-
-struct region_t;
-typedef struct region_t *memory_handle_t;
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN 32
-#endif
-
-typedef char dev_info_t[DEV_NAME_LEN];
-
-#endif /* _LINUX_CS_TYPES_H */
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index c180165fbd3..70c58ed2278 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -20,7 +20,6 @@
 #include <linux/mod_devicetable.h>
 #endif
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/device_id.h>
 
 #ifdef __KERNEL__
@@ -37,6 +36,8 @@ struct pcmcia_device;
 struct config_t;
 struct net_device;
 
+typedef struct resource *window_handle_t;
+
 /* dynamic device IDs for PCMCIA device drivers. See
  * Documentation/pcmcia/driver.txt for details.
 */
@@ -62,6 +63,17 @@ struct pcmcia_driver {
 int pcmcia_register_driver(struct pcmcia_driver *driver);
 void pcmcia_unregister_driver(struct pcmcia_driver *driver);
 
+/* for struct resource * array embedded in struct pcmcia_device */
+enum {
+	PCMCIA_IOPORT_0,
+	PCMCIA_IOPORT_1,
+	PCMCIA_IOMEM_0,
+	PCMCIA_IOMEM_1,
+	PCMCIA_IOMEM_2,
+	PCMCIA_IOMEM_3,
+	PCMCIA_NUM_RESOURCES,
+};
+
 struct pcmcia_device {
 	/* the socket and the device_no [for multifunction devices]
 	   uniquely define a pcmcia_device */
@@ -79,13 +91,14 @@ struct pcmcia_device {
 	struct list_head	socket_device_list;
 
 	/* deprecated, will be cleaned up soon */
-	u_int			open;
-	io_req_t		io;
 	config_req_t		conf;
 	window_handle_t		win;
 
 	/* device setup */
 	unsigned int		irq;
+	struct resource		*resource[PCMCIA_NUM_RESOURCES];
+
+	unsigned int		io_lines; /* number of I/O lines */
 
 	/* Is the device suspended? */
 	u16			suspended:1;
@@ -117,13 +130,9 @@ struct pcmcia_device {
 	u64			dma_mask;
 	struct device		dev;
 
-#ifdef CONFIG_PCMCIA_IOCTL
-	/* device driver wanted by cardmgr */
-	struct pcmcia_driver	*cardmgr;
-#endif
-
 	/* data private to drivers */
 	void			*priv;
+	unsigned int		open;
 };
 
 #define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
@@ -178,11 +187,11 @@ struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *p_dev);
 int pcmcia_reset_card(struct pcmcia_socket *skt);
 
 /* CIS config */
-int pcmcia_access_configuration_register(struct pcmcia_device *p_dev,
-					 conf_reg_t *reg);
+int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val);
+int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val);
 
 /* device configuration */
-int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req);
+int pcmcia_request_io(struct pcmcia_device *p_dev);
 
 int __must_check
 __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev,
@@ -204,215 +213,27 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req,
 			  window_handle_t *wh);
 int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win);
 int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win,
-			memreq_t *req);
+			unsigned int offset);
 
 int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
 void pcmcia_disable_device(struct pcmcia_device *p_dev);
 
-#endif /* __KERNEL__ */
-
-
+/* IO ports */
+#define IO_DATA_PATH_WIDTH	0x18
+#define IO_DATA_PATH_WIDTH_8	0x00
+#define IO_DATA_PATH_WIDTH_16	0x08
+#define IO_DATA_PATH_WIDTH_AUTO	0x10
 
-/* Below, there are only definitions which are used by
- * - the PCMCIA ioctl
- * - deprecated PCMCIA userspace tools only
- *
- * here be dragons ... here be dragons ... here be dragons ... here be drag
- */
-
-#if defined(CONFIG_PCMCIA_IOCTL) || !defined(__KERNEL__)
-
-#if defined(__arm__) || defined(__mips__) || defined(__avr32__) || \
-	defined(__bfin__)
-/* This (ioaddr_t) is exposed to userspace & hence cannot be changed. */
-typedef u_int   ioaddr_t;
-#else
-typedef u_short	ioaddr_t;
-#endif
+/* convert flag found in cfgtable to data path width parameter */
+static inline int pcmcia_io_cfg_data_width(unsigned int flags)
+{
+	if (!(flags & CISTPL_IO_8BIT))
+		return IO_DATA_PATH_WIDTH_16;
+	if (!(flags & CISTPL_IO_16BIT))
+		return IO_DATA_PATH_WIDTH_8;
+	return IO_DATA_PATH_WIDTH_AUTO;
+}
 
-/* for AdjustResourceInfo */
-typedef struct adjust_t {
-	u_int			Action;
-	u_int			Resource;
-	u_int			Attributes;
-	union {
-		struct memory {
-			u_long		Base;
-			u_long		Size;
-		} memory;
-		struct io {
-			ioaddr_t	BasePort;
-			ioaddr_t	NumPorts;
-			u_int		IOAddrLines;
-		} io;
-		struct irq {
-			u_int		IRQ;
-		} irq;
-	} resource;
-} adjust_t;
-
-/* Action field */
-#define REMOVE_MANAGED_RESOURCE		1
-#define ADD_MANAGED_RESOURCE		2
-#define GET_FIRST_MANAGED_RESOURCE	3
-#define GET_NEXT_MANAGED_RESOURCE	4
-/* Resource field */
-#define RES_MEMORY_RANGE		1
-#define RES_IO_RANGE			2
-#define RES_IRQ				3
-/* Attribute field */
-#define RES_IRQ_TYPE			0x03
-#define RES_IRQ_TYPE_EXCLUSIVE		0
-#define RES_IRQ_TYPE_TIME		1
-#define RES_IRQ_TYPE_DYNAMIC		2
-#define RES_IRQ_CSC			0x04
-#define RES_SHARED			0x08
-#define RES_RESERVED			0x10
-#define RES_ALLOCATED			0x20
-#define RES_REMOVED			0x40
-
-
-typedef struct tuple_parse_t {
-	tuple_t			tuple;
-	cisdata_t		data[255];
-	cisparse_t		parse;
-} tuple_parse_t;
-
-typedef struct win_info_t {
-	window_handle_t		handle;
-	win_req_t		window;
-	memreq_t		map;
-} win_info_t;
-
-typedef struct bind_info_t {
-	dev_info_t		dev_info;
-	u_char			function;
-	struct pcmcia_device	*instance;
-	char			name[DEV_NAME_LEN];
-	u_short			major, minor;
-	void			*next;
-} bind_info_t;
-
-typedef struct mtd_info_t {
-	dev_info_t     		dev_info;
-	u_int			Attributes;
-	u_int			CardOffset;
-} mtd_info_t;
-
-typedef struct region_info_t {
-	u_int			Attributes;
-	u_int			CardOffset;
-	u_int			RegionSize;
-	u_int			AccessSpeed;
-	u_int			BlockSize;
-	u_int			PartMultiple;
-	u_char			JedecMfr, JedecInfo;
-	memory_handle_t		next;
-} region_info_t;
-
-#define REGION_TYPE		0x0001
-#define REGION_TYPE_CM		0x0000
-#define REGION_TYPE_AM		0x0001
-#define REGION_PREFETCH		0x0008
-#define REGION_CACHEABLE	0x0010
-#define REGION_BAR_MASK		0xe000
-#define REGION_BAR_SHIFT	13
-
-/* For ReplaceCIS */
-typedef struct cisdump_t {
-	u_int			Length;
-	cisdata_t		Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-/* for GetConfigurationInfo */
-typedef struct config_info_t {
-	u_char			Function;
-	u_int			Attributes;
-	u_int			Vcc, Vpp1, Vpp2;
-	u_int			IntType;
-	u_int			ConfigBase;
-	u_char			Status, Pin, Copy, Option, ExtStatus;
-	u_int			Present;
-	u_int			CardValues;
-	u_int			AssignedIRQ;
-	u_int			IRQAttributes;
-	ioaddr_t		BasePort1;
-	ioaddr_t		NumPorts1;
-	u_int			Attributes1;
-	ioaddr_t		BasePort2;
-	ioaddr_t		NumPorts2;
-	u_int			Attributes2;
-	u_int			IOAddrLines;
-} config_info_t;
-
-/* For ValidateCIS */
-typedef struct cisinfo_t {
-	u_int			Chains;
-} cisinfo_t;
-
-typedef struct cs_status_t {
-	u_char			Function;
-	event_t 		CardState;
-	event_t			SocketState;
-} cs_status_t;
-
-typedef union ds_ioctl_arg_t {
-	adjust_t		adjust;
-	config_info_t		config;
-	tuple_t			tuple;
-	tuple_parse_t		tuple_parse;
-	client_req_t		client_req;
-	cs_status_t		status;
-	conf_reg_t		conf_reg;
-	cisinfo_t		cisinfo;
-	region_info_t		region;
-	bind_info_t		bind_info;
-	mtd_info_t		mtd_info;
-	win_info_t		win_info;
-	cisdump_t		cisdump;
-} ds_ioctl_arg_t;
-
-#define DS_ADJUST_RESOURCE_INFO			_IOWR('d',  2, adjust_t)
-#define DS_GET_CONFIGURATION_INFO		_IOWR('d',  3, config_info_t)
-#define DS_GET_FIRST_TUPLE			_IOWR('d',  4, tuple_t)
-#define DS_GET_NEXT_TUPLE			_IOWR('d',  5, tuple_t)
-#define DS_GET_TUPLE_DATA			_IOWR('d',  6, tuple_parse_t)
-#define DS_PARSE_TUPLE				_IOWR('d',  7, tuple_parse_t)
-#define DS_RESET_CARD				_IO  ('d',  8)
-#define DS_GET_STATUS				_IOWR('d',  9, cs_status_t)
-#define DS_ACCESS_CONFIGURATION_REGISTER	_IOWR('d', 10, conf_reg_t)
-#define DS_VALIDATE_CIS				_IOR ('d', 11, cisinfo_t)
-#define DS_SUSPEND_CARD				_IO  ('d', 12)
-#define DS_RESUME_CARD				_IO  ('d', 13)
-#define DS_EJECT_CARD				_IO  ('d', 14)
-#define DS_INSERT_CARD				_IO  ('d', 15)
-#define DS_GET_FIRST_REGION			_IOWR('d', 16, region_info_t)
-#define DS_GET_NEXT_REGION			_IOWR('d', 17, region_info_t)
-#define DS_REPLACE_CIS				_IOWR('d', 18, cisdump_t)
-#define DS_GET_FIRST_WINDOW			_IOR ('d', 19, win_info_t)
-#define DS_GET_NEXT_WINDOW			_IOWR('d', 20, win_info_t)
-#define DS_GET_MEM_PAGE				_IOWR('d', 21, win_info_t)
-
-#define DS_BIND_REQUEST				_IOWR('d', 60, bind_info_t)
-#define DS_GET_DEVICE_INFO			_IOWR('d', 61, bind_info_t)
-#define DS_GET_NEXT_DEVICE			_IOWR('d', 62, bind_info_t)
-#define DS_UNBIND_REQUEST			_IOW ('d', 63, bind_info_t)
-#define DS_BIND_MTD				_IOWR('d', 64, mtd_info_t)
-
-
-/* used in userspace only */
-#define CS_IN_USE			0x1e
-
-#define INFO_MASTER_CLIENT	0x01
-#define INFO_IO_CLIENT		0x02
-#define INFO_MTD_CLIENT		0x04
-#define INFO_MEM_CLIENT		0x08
-#define MAX_NUM_CLIENTS		3
-
-#define INFO_CARD_SHARE		0x10
-#define INFO_CARD_EXCL		0x20
-
-
-#endif /* !defined(__KERNEL__) || defined(CONFIG_PCMCIA_IOCTL) */
+#endif /* __KERNEL__ */
 
 #endif /* _LINUX_DS_H */
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 764281b2921..626b63c33d9 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -19,7 +19,6 @@
 #include <linux/sched.h>	/* task_struct, completion */
 #include <linux/mutex.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #ifdef CONFIG_CARDBUS
 #include <linux/pci.h>
@@ -162,17 +161,10 @@ struct pcmcia_socket {
 	u_int				pci_irq;
 	struct pci_dev			*cb_dev;
 
-
 	/* socket setup is done so resources should be able to be allocated.
 	 * Only if set to 1, calls to find_{io,mem}_region are handled, and
 	 * insertio events are actually managed by the PCMCIA layer.*/
-	u8				resource_setup_done:1;
-
-	/* It's old if resource setup is done using adjust_resource_info() */
-	u8				resource_setup_old:1;
-	u8				resource_setup_new:1;
-
-	u8				reserved:5;
+	u8				resource_setup_done;
 
 	/* socket operations */
 	struct pccard_operations	*ops;
@@ -218,15 +210,8 @@ struct pcmcia_socket {
 	 * incorrectness and change */
 	u8				device_count;
 
-	/* 16-bit state: */
-	struct {
-		/* "master" ioctl is used */
-		u8			busy:1;
-		/* the PCMCIA card consists of two pseudo devices */
-		u8			has_pfc:1;
-
-		u8			reserved:6;
-	} pcmcia_state;
+	/* does the PCMCIA card consist of two pseudo devices? */
+	u8				pcmcia_pfc;
 
 	/* non-zero if PCMCIA card is present */
 	atomic_t			present;
@@ -234,10 +219,6 @@ struct pcmcia_socket {
 	/* IRQ to be used by PCMCIA devices. May not be IRQ 0. */
 	unsigned int			pcmcia_irq;
 
-#ifdef CONFIG_PCMCIA_IOCTL
-	struct user_info_t		*user;
-	wait_queue_head_t		queue;
-#endif /* CONFIG_PCMCIA_IOCTL */
 #endif /* CONFIG_PCMCIA */
 
 	/* socket device */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index f3e8f3c0772..857b3b9cf12 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -555,7 +555,7 @@ enum ib_qp_type {
 	IB_QPT_UC,
 	IB_QPT_UD,
 	IB_QPT_RAW_IPV6,
-	IB_QPT_RAW_ETY
+	IB_QPT_RAW_ETHERTYPE
 };
 
 enum ib_qp_create_flags {
diff --git a/include/sound/asound.h b/include/sound/asound.h
index 9f1eecf99e6..a1803ecea34 100644
--- a/include/sound/asound.h
+++ b/include/sound/asound.h
@@ -212,7 +212,11 @@ typedef int __bitwise snd_pcm_format_t;
 #define	SNDRV_PCM_FORMAT_S18_3BE	((__force snd_pcm_format_t) 41)	/* in three bytes */
 #define	SNDRV_PCM_FORMAT_U18_3LE	((__force snd_pcm_format_t) 42)	/* in three bytes */
 #define	SNDRV_PCM_FORMAT_U18_3BE	((__force snd_pcm_format_t) 43)	/* in three bytes */
-#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_U18_3BE
+#define	SNDRV_PCM_FORMAT_G723_24	((__force snd_pcm_format_t) 44) /* 8 samples in 3 bytes */
+#define	SNDRV_PCM_FORMAT_G723_24_1B	((__force snd_pcm_format_t) 45) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_G723_40	((__force snd_pcm_format_t) 46) /* 8 Samples in 5 bytes */
+#define	SNDRV_PCM_FORMAT_G723_40_1B	((__force snd_pcm_format_t) 47) /* 1 sample in 1 byte */
+#define	SNDRV_PCM_FORMAT_LAST		SNDRV_PCM_FORMAT_G723_40_1B
 
 #ifdef SNDRV_LITTLE_ENDIAN
 #define	SNDRV_PCM_FORMAT_S16		SNDRV_PCM_FORMAT_S16_LE
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index 6e3a29732dc..85f1c6bf856 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -174,6 +174,10 @@ struct snd_pcm_ops {
 #define SNDRV_PCM_FMTBIT_U18_3LE	(1ULL << SNDRV_PCM_FORMAT_U18_3LE)
 #define SNDRV_PCM_FMTBIT_S18_3BE	(1ULL << SNDRV_PCM_FORMAT_S18_3BE)
 #define SNDRV_PCM_FMTBIT_U18_3BE	(1ULL << SNDRV_PCM_FORMAT_U18_3BE)
+#define SNDRV_PCM_FMTBIT_G723_24	(1ULL << SNDRV_PCM_FORMAT_G723_24)
+#define SNDRV_PCM_FMTBIT_G723_24_1B	(1ULL << SNDRV_PCM_FORMAT_G723_24_1B)
+#define SNDRV_PCM_FMTBIT_G723_40	(1ULL << SNDRV_PCM_FORMAT_G723_40)
+#define SNDRV_PCM_FMTBIT_G723_40_1B	(1ULL << SNDRV_PCM_FORMAT_G723_40_1B)
 
 #ifdef SNDRV_LITTLE_ENDIAN
 #define SNDRV_PCM_FMTBIT_S16		SNDRV_PCM_FMTBIT_S16_LE
@@ -313,7 +317,7 @@ struct snd_pcm_runtime {
 	struct snd_pcm_mmap_control *control;
 
 	/* -- locking / scheduling -- */
-	unsigned int twake: 1;		/* do transfer (!poll) wakeup */
+	snd_pcm_uframes_t twake; 	/* do transfer (!poll) wakeup if non-zero */
 	wait_queue_head_t sleep;	/* poll sleep */
 	wait_queue_head_t tsleep;	/* transfer sleep */
 	struct fasync_struct *fasync;
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index c0227361a87..9d51d6f3589 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -12,6 +12,9 @@
  * published by the Free Software Foundation.
  */
 
+#define FSI_PORT_A	0
+#define FSI_PORT_B	1
+
 /* flags format
 
  * 0xABCDEEFF
@@ -55,12 +58,14 @@
 #define SH_FSI_GET_IFMT(x)	((x >> 8) & SH_FSI_FMT_MASK)
 #define SH_FSI_GET_OFMT(x)	((x >> 0) & SH_FSI_FMT_MASK)
 
-#define SH_FSI_FMT_MONO		(1 << 0)
-#define SH_FSI_FMT_MONO_DELAY	(1 << 1)
-#define SH_FSI_FMT_PCM		(1 << 2)
-#define SH_FSI_FMT_I2S		(1 << 3)
-#define SH_FSI_FMT_TDM		(1 << 4)
-#define SH_FSI_FMT_TDM_DELAY	(1 << 5)
+#define SH_FSI_FMT_MONO		0
+#define SH_FSI_FMT_MONO_DELAY	1
+#define SH_FSI_FMT_PCM		2
+#define SH_FSI_FMT_I2S		3
+#define SH_FSI_FMT_TDM		4
+#define SH_FSI_FMT_TDM_DELAY	5
+#define SH_FSI_FMT_SPDIF	6
+
 
 #define SH_FSI_IFMT_TDM_CH(x) \
 	(SH_FSI_IFMT(TDM)	| SH_FSI_SET_CH_I(x))
@@ -72,9 +77,41 @@
 #define SH_FSI_OFMT_TDM_DELAY_CH(x) \
 	(SH_FSI_OFMT(TDM_DELAY)	| SH_FSI_SET_CH_O(x))
 
+
+/*
+ * set_rate return value
+ *
+ * see ACKMD/BPFMD on
+ *     ACK_MD (FSI2)
+ *     CKG1   (FSI)
+ *
+ * err:  return value < 0
+ *
+ * 0x-00000AB
+ *
+ * A:  ACKMD value
+ * B:  BPFMD value
+ */
+
+#define SH_FSI_ACKMD_MASK	(0xF << 0)
+#define SH_FSI_ACKMD_512	(1 << 0)
+#define SH_FSI_ACKMD_256	(2 << 0)
+#define SH_FSI_ACKMD_128	(3 << 0)
+#define SH_FSI_ACKMD_64		(4 << 0)
+#define SH_FSI_ACKMD_32		(5 << 0)
+
+#define SH_FSI_BPFMD_MASK	(0xF << 4)
+#define SH_FSI_BPFMD_512	(1 << 4)
+#define SH_FSI_BPFMD_256	(2 << 4)
+#define SH_FSI_BPFMD_128	(3 << 4)
+#define SH_FSI_BPFMD_64		(4 << 4)
+#define SH_FSI_BPFMD_32		(5 << 4)
+#define SH_FSI_BPFMD_16		(6 << 4)
+
 struct sh_fsi_platform_info {
 	unsigned long porta_flags;
 	unsigned long portb_flags;
+	int (*set_rate)(int is_porta, int rate); /* for master mode */
 };
 
 extern struct snd_soc_dai fsi_soc_dai[2];
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 66ff4c124db..c5d9987bc89 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -273,6 +273,8 @@
 #define SND_SOC_DAPM_POST_PMD	0x8		/* after widget power down */
 #define SND_SOC_DAPM_PRE_REG	0x10	/* before audio path setup */
 #define SND_SOC_DAPM_POST_REG	0x20	/* after audio path setup */
+#define SND_SOC_DAPM_PRE_POST_PMD \
+				(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
 
 /* convenience event type detection */
 #define SND_SOC_DAPM_EVENT_ON(e)	\
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 697e7ffe39d..65e9d03ed4f 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -170,6 +170,21 @@
 	.get = xhandler_get, .put = xhandler_put, \
 	.private_value = (unsigned long)&xenum }
 
+#define SOC_DOUBLE_R_SX_TLV(xname, xreg_left, xreg_right, xshift,\
+		xmin, xmax, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+		  SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_2r_sx, \
+	.get = snd_soc_get_volsw_2r_sx, \
+	.put = snd_soc_put_volsw_2r_sx, \
+	.private_value = (unsigned long)&(struct soc_mixer_control) \
+		{.reg = xreg_left, \
+		 .rreg = xreg_right, .shift = xshift, \
+		 .min = xmin, .max = xmax} }
+
+
 /*
  * Simplified versions of above macros, declaring a struct and calculating
  * ARRAY_SIZE internally
@@ -329,6 +344,12 @@ int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_limit_volume(struct snd_soc_codec *codec,
 	const char *name, int max);
+int snd_soc_info_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_info *uinfo);
+int snd_soc_get_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_put_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
 
 /**
  * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h
index 3f428d53195..6c664965679 100644
--- a/include/sound/tlv320dac33-plat.h
+++ b/include/sound/tlv320dac33-plat.h
@@ -15,6 +15,8 @@
 
 struct tlv320dac33_platform_data {
 	int power_gpio;
+	int mode1_latency; /* latency caused by the i2c writes in us */
+	int auto_fifo_config; /* FIFO config based on the period size */
 	int keep_bclk;	/* Keep the BCLK running in FIFO modes */
 	u8 burst_bclkdiv;
 };
diff --git a/include/sound/uda134x.h b/include/sound/uda134x.h
index 509efb05017..e475659bd3b 100644
--- a/include/sound/uda134x.h
+++ b/include/sound/uda134x.h
@@ -18,6 +18,18 @@ struct uda134x_platform_data {
 	struct l3_pins l3;
 	void (*power) (int);
 	int model;
+	/*
+	  ALSA SOC usually puts the device in standby mode when it's not used
+	  for sometime. If you unset is_powered_on_standby the driver will
+	  turn off the ADC/DAC when this callback is invoked and turn it back
+	  on when needed. Unfortunately this will result in a very light bump
+	  (it can be audible only with good earphones). If this bothers you
+	  set is_powered_on_standby, you will have slightly higher power
+	  consumption. Please note that sending the L3 command for ADC is
+	  enough to make the bump, so it doesn't make difference if you
+	  completely take off power from the codec.
+	*/
+	int is_powered_on_standby;
 #define UDA134X_UDA1340 1
 #define UDA134X_UDA1341 2
 #define UDA134X_UDA1344 3
diff --git a/include/trace/boot.h b/include/trace/boot.h
deleted file mode 100644
index 088ea089e31..00000000000
--- a/include/trace/boot.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _LINUX_TRACE_BOOT_H
-#define _LINUX_TRACE_BOOT_H
-
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/init.h>
-
-/*
- * Structure which defines the trace of an initcall
- * while it is called.
- * You don't have to fill the func field since it is
- * only used internally by the tracer.
- */
-struct boot_trace_call {
-	pid_t			caller;
-	char			func[KSYM_SYMBOL_LEN];
-};
-
-/*
- * Structure which defines the trace of an initcall
- * while it returns.
- */
-struct boot_trace_ret {
-	char			func[KSYM_SYMBOL_LEN];
-	int				result;
-	unsigned long long	duration;		/* nsecs */
-};
-
-#ifdef CONFIG_BOOT_TRACER
-/* Append the traces on the ring-buffer */
-extern void trace_boot_call(struct boot_trace_call *bt, initcall_t fn);
-extern void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn);
-
-/* Tells the tracer that smp_pre_initcall is finished.
- * So we can start the tracing
- */
-extern void start_boot_trace(void);
-
-/* Resume the tracing of other necessary events
- * such as sched switches
- */
-extern void enable_boot_trace(void);
-
-/* Suspend this tracing. Actually, only sched_switches tracing have
- * to be suspended. Initcalls doesn't need it.)
- */
-extern void disable_boot_trace(void);
-#else
-static inline
-void trace_boot_call(struct boot_trace_call *bt, initcall_t fn) { }
-
-static inline
-void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn) { }
-
-static inline void start_boot_trace(void) { }
-static inline void enable_boot_trace(void) { }
-static inline void disable_boot_trace(void) { }
-#endif /* CONFIG_BOOT_TRACER */
-
-#endif /* __LINUX_TRACE_BOOT_H */
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index f3865c7b416..01e9e0076a9 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -395,11 +395,12 @@ DEFINE_EVENT(ext4__mb_new_pa, ext4_mb_new_group_pa,
 );
 
 TRACE_EVENT(ext4_mb_release_inode_pa,
-	TP_PROTO(struct ext4_allocation_context *ac,
+	TP_PROTO(struct super_block *sb,
+		 struct ext4_allocation_context *ac,
 		 struct ext4_prealloc_space *pa,
 		 unsigned long long block, unsigned int count),
 
-	TP_ARGS(ac, pa, block, count),
+	TP_ARGS(sb, ac, pa, block, count),
 
 	TP_STRUCT__entry(
 		__field(	dev_t,	dev			)
@@ -410,8 +411,9 @@ TRACE_EVENT(ext4_mb_release_inode_pa,
 	),
 
 	TP_fast_assign(
-		__entry->dev		= ac->ac_sb->s_dev;
-		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->dev		= sb->s_dev;
+		__entry->ino		= (ac && ac->ac_inode) ? 
+						ac->ac_inode->i_ino : 0;
 		__entry->block		= block;
 		__entry->count		= count;
 	),
@@ -422,10 +424,11 @@ TRACE_EVENT(ext4_mb_release_inode_pa,
 );
 
 TRACE_EVENT(ext4_mb_release_group_pa,
-	TP_PROTO(struct ext4_allocation_context *ac,
+	TP_PROTO(struct super_block *sb,
+		 struct ext4_allocation_context *ac,
 		 struct ext4_prealloc_space *pa),
 
-	TP_ARGS(ac, pa),
+	TP_ARGS(sb, ac, pa),
 
 	TP_STRUCT__entry(
 		__field(	dev_t,	dev			)
@@ -436,8 +439,9 @@ TRACE_EVENT(ext4_mb_release_group_pa,
 	),
 
 	TP_fast_assign(
-		__entry->dev		= ac->ac_sb->s_dev;
-		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->dev		= sb->s_dev;
+		__entry->ino		= (ac && ac->ac_inode) ?
+						ac->ac_inode->i_ino : 0;
 		__entry->pa_pstart	= pa->pa_pstart;
 		__entry->pa_len		= pa->pa_len;
 	),
diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h
new file mode 100644
index 00000000000..e3615c09374
--- /dev/null
+++ b/include/trace/events/gfpflags.h
@@ -0,0 +1,37 @@
+/*
+ * The order of these masks is important. Matching masks will be seen
+ * first and the left over flags will end up showing by themselves.
+ *
+ * For example, if we have GFP_KERNEL before GFP_USER we wil get:
+ *
+ *  GFP_KERNEL|GFP_HARDWALL
+ *
+ * Thus most bits set go first.
+ */
+#define show_gfp_flags(flags)						\
+	(flags) ? __print_flags(flags, "|",				\
+	{(unsigned long)GFP_HIGHUSER_MOVABLE,	"GFP_HIGHUSER_MOVABLE"}, \
+	{(unsigned long)GFP_HIGHUSER,		"GFP_HIGHUSER"},	\
+	{(unsigned long)GFP_USER,		"GFP_USER"},		\
+	{(unsigned long)GFP_TEMPORARY,		"GFP_TEMPORARY"},	\
+	{(unsigned long)GFP_KERNEL,		"GFP_KERNEL"},		\
+	{(unsigned long)GFP_NOFS,		"GFP_NOFS"},		\
+	{(unsigned long)GFP_ATOMIC,		"GFP_ATOMIC"},		\
+	{(unsigned long)GFP_NOIO,		"GFP_NOIO"},		\
+	{(unsigned long)__GFP_HIGH,		"GFP_HIGH"},		\
+	{(unsigned long)__GFP_WAIT,		"GFP_WAIT"},		\
+	{(unsigned long)__GFP_IO,		"GFP_IO"},		\
+	{(unsigned long)__GFP_COLD,		"GFP_COLD"},		\
+	{(unsigned long)__GFP_NOWARN,		"GFP_NOWARN"},		\
+	{(unsigned long)__GFP_REPEAT,		"GFP_REPEAT"},		\
+	{(unsigned long)__GFP_NOFAIL,		"GFP_NOFAIL"},		\
+	{(unsigned long)__GFP_NORETRY,		"GFP_NORETRY"},		\
+	{(unsigned long)__GFP_COMP,		"GFP_COMP"},		\
+	{(unsigned long)__GFP_ZERO,		"GFP_ZERO"},		\
+	{(unsigned long)__GFP_NOMEMALLOC,	"GFP_NOMEMALLOC"},	\
+	{(unsigned long)__GFP_HARDWALL,		"GFP_HARDWALL"},	\
+	{(unsigned long)__GFP_THISNODE,		"GFP_THISNODE"},	\
+	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
+	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"}		\
+	) : "GFP_NOWAIT"
+
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index 3adca0ca9db..a9c87ad8331 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -6,43 +6,7 @@
 
 #include <linux/types.h>
 #include <linux/tracepoint.h>
-
-/*
- * The order of these masks is important. Matching masks will be seen
- * first and the left over flags will end up showing by themselves.
- *
- * For example, if we have GFP_KERNEL before GFP_USER we wil get:
- *
- *  GFP_KERNEL|GFP_HARDWALL
- *
- * Thus most bits set go first.
- */
-#define show_gfp_flags(flags)						\
-	(flags) ? __print_flags(flags, "|",				\
-	{(unsigned long)GFP_HIGHUSER_MOVABLE,	"GFP_HIGHUSER_MOVABLE"}, \
-	{(unsigned long)GFP_HIGHUSER,		"GFP_HIGHUSER"},	\
-	{(unsigned long)GFP_USER,		"GFP_USER"},		\
-	{(unsigned long)GFP_TEMPORARY,		"GFP_TEMPORARY"},	\
-	{(unsigned long)GFP_KERNEL,		"GFP_KERNEL"},		\
-	{(unsigned long)GFP_NOFS,		"GFP_NOFS"},		\
-	{(unsigned long)GFP_ATOMIC,		"GFP_ATOMIC"},		\
-	{(unsigned long)GFP_NOIO,		"GFP_NOIO"},		\
-	{(unsigned long)__GFP_HIGH,		"GFP_HIGH"},		\
-	{(unsigned long)__GFP_WAIT,		"GFP_WAIT"},		\
-	{(unsigned long)__GFP_IO,		"GFP_IO"},		\
-	{(unsigned long)__GFP_COLD,		"GFP_COLD"},		\
-	{(unsigned long)__GFP_NOWARN,		"GFP_NOWARN"},		\
-	{(unsigned long)__GFP_REPEAT,		"GFP_REPEAT"},		\
-	{(unsigned long)__GFP_NOFAIL,		"GFP_NOFAIL"},		\
-	{(unsigned long)__GFP_NORETRY,		"GFP_NORETRY"},		\
-	{(unsigned long)__GFP_COMP,		"GFP_COMP"},		\
-	{(unsigned long)__GFP_ZERO,		"GFP_ZERO"},		\
-	{(unsigned long)__GFP_NOMEMALLOC,	"GFP_NOMEMALLOC"},	\
-	{(unsigned long)__GFP_HARDWALL,		"GFP_HARDWALL"},	\
-	{(unsigned long)__GFP_THISNODE,		"GFP_THISNODE"},	\
-	{(unsigned long)__GFP_RECLAIMABLE,	"GFP_RECLAIMABLE"},	\
-	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"}		\
-	) : "GFP_NOWAIT"
+#include "gfpflags.h"
 
 DECLARE_EVENT_CLASS(kmem_alloc,
 
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index b9e1dd6c620..9208c92aeab 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -50,31 +50,6 @@ TRACE_EVENT(sched_kthread_stop_ret,
 );
 
 /*
- * Tracepoint for waiting on task to unschedule:
- */
-TRACE_EVENT(sched_wait_task,
-
-	TP_PROTO(struct task_struct *p),
-
-	TP_ARGS(p),
-
-	TP_STRUCT__entry(
-		__array(	char,	comm,	TASK_COMM_LEN	)
-		__field(	pid_t,	pid			)
-		__field(	int,	prio			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
-		__entry->pid	= p->pid;
-		__entry->prio	= p->prio;
-	),
-
-	TP_printk("comm=%s pid=%d prio=%d",
-		  __entry->comm, __entry->pid, __entry->prio)
-);
-
-/*
  * Tracepoint for waking up a task:
  */
 DECLARE_EVENT_CLASS(sched_wakeup_template,
@@ -240,6 +215,13 @@ DEFINE_EVENT(sched_process_template, sched_process_exit,
 	     TP_ARGS(p));
 
 /*
+ * Tracepoint for waiting on task to unschedule:
+ */
+DEFINE_EVENT(sched_process_template, sched_wait_task,
+	TP_PROTO(struct task_struct *p),
+	TP_ARGS(p));
+
+/*
  * Tracepoint for a waiting task:
  */
 TRACE_EVENT(sched_process_wait,
diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h
index 9496b965d62..c624126a9c8 100644
--- a/include/trace/events/timer.h
+++ b/include/trace/events/timer.h
@@ -8,11 +8,7 @@
 #include <linux/hrtimer.h>
 #include <linux/timer.h>
 
-/**
- * timer_init - called when the timer is initialized
- * @timer:	pointer to struct timer_list
- */
-TRACE_EVENT(timer_init,
+DECLARE_EVENT_CLASS(timer_class,
 
 	TP_PROTO(struct timer_list *timer),
 
@@ -30,6 +26,17 @@ TRACE_EVENT(timer_init,
 );
 
 /**
+ * timer_init - called when the timer is initialized
+ * @timer:	pointer to struct timer_list
+ */
+DEFINE_EVENT(timer_class, timer_init,
+
+	TP_PROTO(struct timer_list *timer),
+
+	TP_ARGS(timer)
+);
+
+/**
  * timer_start - called when the timer is started
  * @timer:	pointer to struct timer_list
  * @expires:	the timers expiry time
@@ -94,42 +101,22 @@ TRACE_EVENT(timer_expire_entry,
  * NOTE: Do NOT derefernce timer in TP_fast_assign. The pointer might
  * be invalid. We solely track the pointer.
  */
-TRACE_EVENT(timer_expire_exit,
+DEFINE_EVENT(timer_class, timer_expire_exit,
 
 	TP_PROTO(struct timer_list *timer),
 
-	TP_ARGS(timer),
-
-	TP_STRUCT__entry(
-		__field(void *,	timer	)
-	),
-
-	TP_fast_assign(
-		__entry->timer	= timer;
-	),
-
-	TP_printk("timer=%p", __entry->timer)
+	TP_ARGS(timer)
 );
 
 /**
  * timer_cancel - called when the timer is canceled
  * @timer:	pointer to struct timer_list
  */
-TRACE_EVENT(timer_cancel,
+DEFINE_EVENT(timer_class, timer_cancel,
 
 	TP_PROTO(struct timer_list *timer),
 
-	TP_ARGS(timer),
-
-	TP_STRUCT__entry(
-		__field( void *,	timer	)
-	),
-
-	TP_fast_assign(
-		__entry->timer	= timer;
-	),
-
-	TP_printk("timer=%p", __entry->timer)
+	TP_ARGS(timer)
 );
 
 /**
@@ -224,14 +211,7 @@ TRACE_EVENT(hrtimer_expire_entry,
 		  (unsigned long long)ktime_to_ns((ktime_t) { .tv64 = __entry->now }))
  );
 
-/**
- * hrtimer_expire_exit - called immediately after the hrtimer callback returns
- * @timer:	pointer to struct hrtimer
- *
- * When used in combination with the hrtimer_expire_entry tracepoint we can
- * determine the runtime of the callback function.
- */
-TRACE_EVENT(hrtimer_expire_exit,
+DECLARE_EVENT_CLASS(hrtimer_class,
 
 	TP_PROTO(struct hrtimer *hrtimer),
 
@@ -249,24 +229,28 @@ TRACE_EVENT(hrtimer_expire_exit,
 );
 
 /**
- * hrtimer_cancel - called when the hrtimer is canceled
- * @hrtimer:	pointer to struct hrtimer
+ * hrtimer_expire_exit - called immediately after the hrtimer callback returns
+ * @timer:	pointer to struct hrtimer
+ *
+ * When used in combination with the hrtimer_expire_entry tracepoint we can
+ * determine the runtime of the callback function.
  */
-TRACE_EVENT(hrtimer_cancel,
+DEFINE_EVENT(hrtimer_class, hrtimer_expire_exit,
 
 	TP_PROTO(struct hrtimer *hrtimer),
 
-	TP_ARGS(hrtimer),
+	TP_ARGS(hrtimer)
+);
 
-	TP_STRUCT__entry(
-		__field( void *,	hrtimer	)
-	),
+/**
+ * hrtimer_cancel - called when the hrtimer is canceled
+ * @hrtimer:	pointer to struct hrtimer
+ */
+DEFINE_EVENT(hrtimer_class, hrtimer_cancel,
 
-	TP_fast_assign(
-		__entry->hrtimer	= hrtimer;
-	),
+	TP_PROTO(struct hrtimer *hrtimer),
 
-	TP_printk("hrtimer=%p", __entry->hrtimer)
+	TP_ARGS(hrtimer)
 );
 
 /**
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
new file mode 100644
index 00000000000..370aa5a8732
--- /dev/null
+++ b/include/trace/events/vmscan.h
@@ -0,0 +1,275 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM vmscan
+
+#if !defined(_TRACE_VMSCAN_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_VMSCAN_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include "gfpflags.h"
+
+#define RECLAIM_WB_ANON		0x0001u
+#define RECLAIM_WB_FILE		0x0002u
+#define RECLAIM_WB_SYNC		0x0004u
+#define RECLAIM_WB_ASYNC	0x0008u
+
+#define show_reclaim_flags(flags)				\
+	(flags) ? __print_flags(flags, "|",			\
+		{RECLAIM_WB_ANON,	"RECLAIM_WB_ANON"},	\
+		{RECLAIM_WB_FILE,	"RECLAIM_WB_FILE"},	\
+		{RECLAIM_WB_SYNC,	"RECLAIM_WB_SYNC"},	\
+		{RECLAIM_WB_ASYNC,	"RECLAIM_WB_ASYNC"}	\
+		) : "RECLAIM_WB_NONE"
+
+#define trace_reclaim_flags(page, sync) ( \
+	(page_is_file_cache(page) ? RECLAIM_WB_FILE : RECLAIM_WB_ANON) | \
+	(sync == PAGEOUT_IO_SYNC ? RECLAIM_WB_SYNC : RECLAIM_WB_ASYNC)   \
+	)
+
+TRACE_EVENT(mm_vmscan_kswapd_sleep,
+
+	TP_PROTO(int nid),
+
+	TP_ARGS(nid),
+
+	TP_STRUCT__entry(
+		__field(	int,	nid	)
+	),
+
+	TP_fast_assign(
+		__entry->nid	= nid;
+	),
+
+	TP_printk("nid=%d", __entry->nid)
+);
+
+TRACE_EVENT(mm_vmscan_kswapd_wake,
+
+	TP_PROTO(int nid, int order),
+
+	TP_ARGS(nid, order),
+
+	TP_STRUCT__entry(
+		__field(	int,	nid	)
+		__field(	int,	order	)
+	),
+
+	TP_fast_assign(
+		__entry->nid	= nid;
+		__entry->order	= order;
+	),
+
+	TP_printk("nid=%d order=%d", __entry->nid, __entry->order)
+);
+
+TRACE_EVENT(mm_vmscan_wakeup_kswapd,
+
+	TP_PROTO(int nid, int zid, int order),
+
+	TP_ARGS(nid, zid, order),
+
+	TP_STRUCT__entry(
+		__field(	int,		nid	)
+		__field(	int,		zid	)
+		__field(	int,		order	)
+	),
+
+	TP_fast_assign(
+		__entry->nid		= nid;
+		__entry->zid		= zid;
+		__entry->order		= order;
+	),
+
+	TP_printk("nid=%d zid=%d order=%d",
+		__entry->nid,
+		__entry->zid,
+		__entry->order)
+);
+
+DECLARE_EVENT_CLASS(mm_vmscan_direct_reclaim_begin_template,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags),
+
+	TP_STRUCT__entry(
+		__field(	int,	order		)
+		__field(	int,	may_writepage	)
+		__field(	gfp_t,	gfp_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->order		= order;
+		__entry->may_writepage	= may_writepage;
+		__entry->gfp_flags	= gfp_flags;
+	),
+
+	TP_printk("order=%d may_writepage=%d gfp_flags=%s",
+		__entry->order,
+		__entry->may_writepage,
+		show_gfp_flags(__entry->gfp_flags))
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_direct_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_memcg_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_begin_template, mm_vmscan_memcg_softlimit_reclaim_begin,
+
+	TP_PROTO(int order, int may_writepage, gfp_t gfp_flags),
+
+	TP_ARGS(order, may_writepage, gfp_flags)
+);
+
+DECLARE_EVENT_CLASS(mm_vmscan_direct_reclaim_end_template,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	nr_reclaimed	)
+	),
+
+	TP_fast_assign(
+		__entry->nr_reclaimed	= nr_reclaimed;
+	),
+
+	TP_printk("nr_reclaimed=%lu", __entry->nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_direct_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_memcg_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+DEFINE_EVENT(mm_vmscan_direct_reclaim_end_template, mm_vmscan_memcg_softlimit_reclaim_end,
+
+	TP_PROTO(unsigned long nr_reclaimed),
+
+	TP_ARGS(nr_reclaimed)
+);
+
+
+DECLARE_EVENT_CLASS(mm_vmscan_lru_isolate_template,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		int isolate_mode),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode),
+
+	TP_STRUCT__entry(
+		__field(int, order)
+		__field(unsigned long, nr_requested)
+		__field(unsigned long, nr_scanned)
+		__field(unsigned long, nr_taken)
+		__field(unsigned long, nr_lumpy_taken)
+		__field(unsigned long, nr_lumpy_dirty)
+		__field(unsigned long, nr_lumpy_failed)
+		__field(int, isolate_mode)
+	),
+
+	TP_fast_assign(
+		__entry->order = order;
+		__entry->nr_requested = nr_requested;
+		__entry->nr_scanned = nr_scanned;
+		__entry->nr_taken = nr_taken;
+		__entry->nr_lumpy_taken = nr_lumpy_taken;
+		__entry->nr_lumpy_dirty = nr_lumpy_dirty;
+		__entry->nr_lumpy_failed = nr_lumpy_failed;
+		__entry->isolate_mode = isolate_mode;
+	),
+
+	TP_printk("isolate_mode=%d order=%d nr_requested=%lu nr_scanned=%lu nr_taken=%lu contig_taken=%lu contig_dirty=%lu contig_failed=%lu",
+		__entry->isolate_mode,
+		__entry->order,
+		__entry->nr_requested,
+		__entry->nr_scanned,
+		__entry->nr_taken,
+		__entry->nr_lumpy_taken,
+		__entry->nr_lumpy_dirty,
+		__entry->nr_lumpy_failed)
+);
+
+DEFINE_EVENT(mm_vmscan_lru_isolate_template, mm_vmscan_lru_isolate,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		int isolate_mode),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode)
+
+);
+
+DEFINE_EVENT(mm_vmscan_lru_isolate_template, mm_vmscan_memcg_isolate,
+
+	TP_PROTO(int order,
+		unsigned long nr_requested,
+		unsigned long nr_scanned,
+		unsigned long nr_taken,
+		unsigned long nr_lumpy_taken,
+		unsigned long nr_lumpy_dirty,
+		unsigned long nr_lumpy_failed,
+		int isolate_mode),
+
+	TP_ARGS(order, nr_requested, nr_scanned, nr_taken, nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed, isolate_mode)
+
+);
+
+TRACE_EVENT(mm_vmscan_writepage,
+
+	TP_PROTO(struct page *page,
+		int reclaim_flags),
+
+	TP_ARGS(page, reclaim_flags),
+
+	TP_STRUCT__entry(
+		__field(struct page *, page)
+		__field(int, reclaim_flags)
+	),
+
+	TP_fast_assign(
+		__entry->page = page;
+		__entry->reclaim_flags = reclaim_flags;
+	),
+
+	TP_printk("page=%p pfn=%lu flags=%s",
+		__entry->page,
+		page_to_pfn(__entry->page),
+		show_reclaim_flags(__entry->reclaim_flags))
+);
+
+#endif /* _TRACE_VMSCAN_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
deleted file mode 100644
index d6c974474e7..00000000000
--- a/include/trace/events/workqueue.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM workqueue
-
-#if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_WORKQUEUE_H
-
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/tracepoint.h>
-
-DECLARE_EVENT_CLASS(workqueue,
-
-	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
-
-	TP_ARGS(wq_thread, work),
-
-	TP_STRUCT__entry(
-		__array(char,		thread_comm,	TASK_COMM_LEN)
-		__field(pid_t,		thread_pid)
-		__field(work_func_t,	func)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
-		__entry->thread_pid	= wq_thread->pid;
-		__entry->func		= work->func;
-	),
-
-	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
-		__entry->thread_pid, __entry->func)
-);
-
-DEFINE_EVENT(workqueue, workqueue_insertion,
-
-	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
-
-	TP_ARGS(wq_thread, work)
-);
-
-DEFINE_EVENT(workqueue, workqueue_execution,
-
-	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
-
-	TP_ARGS(wq_thread, work)
-);
-
-/* Trace the creation of one workqueue thread on a cpu */
-TRACE_EVENT(workqueue_creation,
-
-	TP_PROTO(struct task_struct *wq_thread, int cpu),
-
-	TP_ARGS(wq_thread, cpu),
-
-	TP_STRUCT__entry(
-		__array(char,	thread_comm,	TASK_COMM_LEN)
-		__field(pid_t,	thread_pid)
-		__field(int,	cpu)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
-		__entry->thread_pid	= wq_thread->pid;
-		__entry->cpu		= cpu;
-	),
-
-	TP_printk("thread=%s:%d cpu=%d", __entry->thread_comm,
-		__entry->thread_pid, __entry->cpu)
-);
-
-TRACE_EVENT(workqueue_destruction,
-
-	TP_PROTO(struct task_struct *wq_thread),
-
-	TP_ARGS(wq_thread),
-
-	TP_STRUCT__entry(
-		__array(char,	thread_comm,	TASK_COMM_LEN)
-		__field(pid_t,	thread_pid)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
-		__entry->thread_pid	= wq_thread->pid;
-	),
-
-	TP_printk("thread=%s:%d", __entry->thread_comm, __entry->thread_pid)
-);
-
-#endif /* _TRACE_WORKQUEUE_H */
-
-/* This part must be outside protection */
-#include <trace/define_trace.h>
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index 5a64905d727..a9377c0083a 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -75,15 +75,12 @@
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
 	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
 
-#undef __cpparg
-#define __cpparg(arg...) arg
-
 /* Callbacks are meaningless to ftrace. */
 #undef TRACE_EVENT_FN
 #define TRACE_EVENT_FN(name, proto, args, tstruct,			\
 		assign, print, reg, unreg)				\
-	TRACE_EVENT(name, __cpparg(proto), __cpparg(args),		\
-		__cpparg(tstruct), __cpparg(assign), __cpparg(print))	\
+	TRACE_EVENT(name, PARAMS(proto), PARAMS(args),			\
+		PARAMS(tstruct), PARAMS(assign), PARAMS(print))		\
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
@@ -145,7 +142,7 @@
  *	struct trace_seq *s = &iter->seq;
  *	struct ftrace_raw_<call> *field; <-- defined in stage 1
  *	struct trace_entry *entry;
- *	struct trace_seq *p;
+ *	struct trace_seq *p = &iter->tmp_seq;
  *	int ret;
  *
  *	entry = iter->ent;
@@ -157,12 +154,10 @@
  *
  *	field = (typeof(field))entry;
  *
- *	p = &get_cpu_var(ftrace_event_seq);
  *	trace_seq_init(p);
  *	ret = trace_seq_printf(s, "%s: ", <call>);
  *	if (ret)
  *		ret = trace_seq_printf(s, <TP_printk> "\n");
- *	put_cpu();
  *	if (!ret)
  *		return TRACE_TYPE_PARTIAL_LINE;
  *
@@ -216,7 +211,7 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
 	struct trace_seq *s = &iter->seq;				\
 	struct ftrace_raw_##call *field;				\
 	struct trace_entry *entry;					\
-	struct trace_seq *p;						\
+	struct trace_seq *p = &iter->tmp_seq;				\
 	int ret;							\
 									\
 	event = container_of(trace_event, struct ftrace_event_call,	\
@@ -231,12 +226,10 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
 									\
 	field = (typeof(field))entry;					\
 									\
-	p = &get_cpu_var(ftrace_event_seq);				\
 	trace_seq_init(p);						\
 	ret = trace_seq_printf(s, "%s: ", event->name);			\
 	if (ret)							\
 		ret = trace_seq_printf(s, print);			\
-	put_cpu();							\
 	if (!ret)							\
 		return TRACE_TYPE_PARTIAL_LINE;				\
 									\
@@ -255,7 +248,7 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
 	struct trace_seq *s = &iter->seq;				\
 	struct ftrace_raw_##template *field;				\
 	struct trace_entry *entry;					\
-	struct trace_seq *p;						\
+	struct trace_seq *p = &iter->tmp_seq;				\
 	int ret;							\
 									\
 	entry = iter->ent;						\
@@ -267,12 +260,10 @@ ftrace_raw_output_##call(struct trace_iterator *iter, int flags,	\
 									\
 	field = (typeof(field))entry;					\
 									\
-	p = &get_cpu_var(ftrace_event_seq);				\
 	trace_seq_init(p);						\
 	ret = trace_seq_printf(s, "%s: ", #call);			\
 	if (ret)							\
 		ret = trace_seq_printf(s, print);			\
-	put_cpu();							\
 	if (!ret)							\
 		return TRACE_TYPE_PARTIAL_LINE;				\
 									\
@@ -439,6 +430,7 @@ static inline notrace int ftrace_get_offsets_##call(			\
  *	.fields			= LIST_HEAD_INIT(event_class_##call.fields),
  *	.raw_init		= trace_event_raw_init,
  *	.probe			= ftrace_raw_event_##call,
+ *	.reg			= ftrace_event_reg,
  * };
  *
  * static struct ftrace_event_call __used
@@ -567,6 +559,7 @@ static struct ftrace_event_class __used event_class_##call = {		\
 	.fields			= LIST_HEAD_INIT(event_class_##call.fields),\
 	.raw_init		= trace_event_raw_init,			\
 	.probe			= ftrace_raw_event_##call,		\
+	.reg			= ftrace_event_reg,			\
 	_TRACE_PERF_INIT(call)						\
 };
 
@@ -705,7 +698,7 @@ perf_trace_##call(void *__data, proto)					\
 	int __data_size;						\
 	int rctx;							\
 									\
-	perf_fetch_caller_regs(&__regs, 1);				\
+	perf_fetch_caller_regs(&__regs);				\
 									\
 	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
 	__entry_size = ALIGN(__data_size + sizeof(*entry) + sizeof(u32),\
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
index 257e08960d7..31966a4fb8c 100644
--- a/include/trace/syscall.h
+++ b/include/trace/syscall.h
@@ -26,7 +26,6 @@ struct syscall_metadata {
 	const char	**types;
 	const char	**args;
 	struct list_head enter_fields;
-	struct list_head exit_fields;
 
 	struct ftrace_event_call *enter_event;
 	struct ftrace_event_call *exit_event;
diff --git a/include/xen/events.h b/include/xen/events.h
index e68d59a90ca..a15d93262e3 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -56,4 +56,11 @@ void xen_poll_irq(int irq);
 /* Determine the IRQ which is bound to an event channel */
 unsigned irq_from_evtchn(unsigned int evtchn);
 
+/* Xen HVM evtchn vector callback */
+extern void xen_hvm_callback_vector(void);
+extern int xen_have_vector_callback;
+int xen_set_callback_via(uint64_t via);
+void xen_evtchn_do_upcall(struct pt_regs *regs);
+void xen_hvm_evtchn_do_upcall(void);
+
 #endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h
index a40f1cd91be..9a731706a01 100644
--- a/include/xen/grant_table.h
+++ b/include/xen/grant_table.h
@@ -51,6 +51,7 @@ struct gnttab_free_callback {
 	u16 count;
 };
 
+int gnttab_init(void);
 int gnttab_suspend(void);
 int gnttab_resume(void);
 
@@ -112,6 +113,9 @@ int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes,
 void arch_gnttab_unmap_shared(struct grant_entry *shared,
 			      unsigned long nr_gframes);
 
+extern unsigned long xen_hvm_resume_frames;
+unsigned int gnttab_max_grant_frames(void);
+
 #define gnttab_map_vaddr(map) ((void *)(map.host_virt_addr))
 
 #endif /* __ASM_GNTTAB_H__ */
diff --git a/include/xen/hvm.h b/include/xen/hvm.h
new file mode 100644
index 00000000000..b193fa2f9fd
--- /dev/null
+++ b/include/xen/hvm.h
@@ -0,0 +1,30 @@
+/* Simple wrappers around HVM functions */
+#ifndef XEN_HVM_H__
+#define XEN_HVM_H__
+
+#include <xen/interface/hvm/params.h>
+#include <asm/xen/hypercall.h>
+
+static inline int hvm_get_parameter(int idx, uint64_t *value)
+{
+	struct xen_hvm_param xhv;
+	int r;
+
+	xhv.domid = DOMID_SELF;
+	xhv.index = idx;
+	r = HYPERVISOR_hvm_op(HVMOP_get_param, &xhv);
+	if (r < 0) {
+		printk(KERN_ERR "Cannot get hvm parameter %d: %d!\n",
+			idx, r);
+		return r;
+	}
+	*value = xhv.value;
+	return r;
+}
+
+#define HVM_CALLBACK_VIA_TYPE_VECTOR 0x2
+#define HVM_CALLBACK_VIA_TYPE_SHIFT 56
+#define HVM_CALLBACK_VECTOR(x) (((uint64_t)HVM_CALLBACK_VIA_TYPE_VECTOR)<<\
+		HVM_CALLBACK_VIA_TYPE_SHIFT | (x))
+
+#endif /* XEN_HVM_H__ */
diff --git a/include/xen/interface/features.h b/include/xen/interface/features.h
index f51b6413b05..70d2563ab16 100644
--- a/include/xen/interface/features.h
+++ b/include/xen/interface/features.h
@@ -41,6 +41,12 @@
 /* x86: Does this Xen host support the MMU_PT_UPDATE_PRESERVE_AD hypercall? */
 #define XENFEAT_mmu_pt_update_preserve_ad  5
 
+/* x86: Does this Xen host support the HVM callback vector type? */
+#define XENFEAT_hvm_callback_vector        8
+
+/* x86: pvclock algorithm is safe to use on HVM */
+#define XENFEAT_hvm_safe_pvclock           9
+
 #define XENFEAT_NR_SUBMAPS 1
 
 #endif /* __XEN_PUBLIC_FEATURES_H__ */
diff --git a/include/xen/interface/grant_table.h b/include/xen/interface/grant_table.h
index 39da93c21de..39e571796e3 100644
--- a/include/xen/interface/grant_table.h
+++ b/include/xen/interface/grant_table.h
@@ -28,6 +28,7 @@
 #ifndef __XEN_PUBLIC_GRANT_TABLE_H__
 #define __XEN_PUBLIC_GRANT_TABLE_H__
 
+#include <xen/interface/xen.h>
 
 /***********************************
  * GRANT TABLE REPRESENTATION
diff --git a/include/xen/interface/hvm/hvm_op.h b/include/xen/interface/hvm/hvm_op.h
new file mode 100644
index 00000000000..a4827f46ee9
--- /dev/null
+++ b/include/xen/interface/hvm/hvm_op.h
@@ -0,0 +1,46 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_HVM_HVM_OP_H__
+#define __XEN_PUBLIC_HVM_HVM_OP_H__
+
+/* Get/set subcommands: the second argument of the hypercall is a
+ * pointer to a xen_hvm_param struct. */
+#define HVMOP_set_param           0
+#define HVMOP_get_param           1
+struct xen_hvm_param {
+    domid_t  domid;    /* IN */
+    uint32_t index;    /* IN */
+    uint64_t value;    /* IN/OUT */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_param);
+
+/* Hint from PV drivers for pagetable destruction. */
+#define HVMOP_pagetable_dying       9
+struct xen_hvm_pagetable_dying {
+    /* Domain with a pagetable about to be destroyed. */
+    domid_t  domid;
+    /* guest physical address of the toplevel pagetable dying */
+    aligned_u64 gpa;
+};
+typedef struct xen_hvm_pagetable_dying xen_hvm_pagetable_dying_t;
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_pagetable_dying_t);
+ 
+#endif /* __XEN_PUBLIC_HVM_HVM_OP_H__ */
diff --git a/include/xen/interface/hvm/params.h b/include/xen/interface/hvm/params.h
new file mode 100644
index 00000000000..1888d8c157e
--- /dev/null
+++ b/include/xen/interface/hvm/params.h
@@ -0,0 +1,95 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __XEN_PUBLIC_HVM_PARAMS_H__
+#define __XEN_PUBLIC_HVM_PARAMS_H__
+
+#include "hvm_op.h"
+
+/*
+ * Parameter space for HVMOP_{set,get}_param.
+ */
+
+/*
+ * How should CPU0 event-channel notifications be delivered?
+ * val[63:56] == 0: val[55:0] is a delivery GSI (Global System Interrupt).
+ * val[63:56] == 1: val[55:0] is a delivery PCI INTx line, as follows:
+ *                  Domain = val[47:32], Bus  = val[31:16],
+ *                  DevFn  = val[15: 8], IntX = val[ 1: 0]
+ * val[63:56] == 2: val[7:0] is a vector number.
+ * If val == 0 then CPU0 event-channel notifications are not delivered.
+ */
+#define HVM_PARAM_CALLBACK_IRQ 0
+
+#define HVM_PARAM_STORE_PFN    1
+#define HVM_PARAM_STORE_EVTCHN 2
+
+#define HVM_PARAM_PAE_ENABLED  4
+
+#define HVM_PARAM_IOREQ_PFN    5
+
+#define HVM_PARAM_BUFIOREQ_PFN 6
+
+/*
+ * Set mode for virtual timers (currently x86 only):
+ *  delay_for_missed_ticks (default):
+ *   Do not advance a vcpu's time beyond the correct delivery time for
+ *   interrupts that have been missed due to preemption. Deliver missed
+ *   interrupts when the vcpu is rescheduled and advance the vcpu's virtual
+ *   time stepwise for each one.
+ *  no_delay_for_missed_ticks:
+ *   As above, missed interrupts are delivered, but guest time always tracks
+ *   wallclock (i.e., real) time while doing so.
+ *  no_missed_ticks_pending:
+ *   No missed interrupts are held pending. Instead, to ensure ticks are
+ *   delivered at some non-zero rate, if we detect missed ticks then the
+ *   internal tick alarm is not disabled if the VCPU is preempted during the
+ *   next tick period.
+ *  one_missed_tick_pending:
+ *   Missed interrupts are collapsed together and delivered as one 'late tick'.
+ *   Guest time always tracks wallclock (i.e., real) time.
+ */
+#define HVM_PARAM_TIMER_MODE   10
+#define HVMPTM_delay_for_missed_ticks    0
+#define HVMPTM_no_delay_for_missed_ticks 1
+#define HVMPTM_no_missed_ticks_pending   2
+#define HVMPTM_one_missed_tick_pending   3
+
+/* Boolean: Enable virtual HPET (high-precision event timer)? (x86-only) */
+#define HVM_PARAM_HPET_ENABLED 11
+
+/* Identity-map page directory used by Intel EPT when CR0.PG=0. */
+#define HVM_PARAM_IDENT_PT     12
+
+/* Device Model domain, defaults to 0. */
+#define HVM_PARAM_DM_DOMAIN    13
+
+/* ACPI S state: currently support S0 and S3 on x86. */
+#define HVM_PARAM_ACPI_S_STATE 14
+
+/* TSS used on Intel when CR0.PE=0. */
+#define HVM_PARAM_VM86_TSS     15
+
+/* Boolean: Enable aligning all periodic vpts to reduce interrupts */
+#define HVM_PARAM_VPT_ALIGN    16
+
+#define HVM_NR_PARAMS          17
+
+#endif /* __XEN_PUBLIC_HVM_PARAMS_H__ */
diff --git a/include/xen/platform_pci.h b/include/xen/platform_pci.h
new file mode 100644
index 00000000000..ce9d671c636
--- /dev/null
+++ b/include/xen/platform_pci.h
@@ -0,0 +1,49 @@
+#ifndef _XEN_PLATFORM_PCI_H
+#define _XEN_PLATFORM_PCI_H
+
+#define XEN_IOPORT_MAGIC_VAL 0x49d2
+#define XEN_IOPORT_LINUX_PRODNUM 0x0003
+#define XEN_IOPORT_LINUX_DRVVER  0x0001
+
+#define XEN_IOPORT_BASE 0x10
+
+#define XEN_IOPORT_PLATFLAGS	(XEN_IOPORT_BASE + 0) /* 1 byte access (R/W) */
+#define XEN_IOPORT_MAGIC	(XEN_IOPORT_BASE + 0) /* 2 byte access (R) */
+#define XEN_IOPORT_UNPLUG	(XEN_IOPORT_BASE + 0) /* 2 byte access (W) */
+#define XEN_IOPORT_DRVVER	(XEN_IOPORT_BASE + 0) /* 4 byte access (W) */
+
+#define XEN_IOPORT_SYSLOG	(XEN_IOPORT_BASE + 2) /* 1 byte access (W) */
+#define XEN_IOPORT_PROTOVER	(XEN_IOPORT_BASE + 2) /* 1 byte access (R) */
+#define XEN_IOPORT_PRODNUM	(XEN_IOPORT_BASE + 2) /* 2 byte access (W) */
+
+#define XEN_UNPLUG_ALL_IDE_DISKS 1
+#define XEN_UNPLUG_ALL_NICS 2
+#define XEN_UNPLUG_AUX_IDE_DISKS 4
+#define XEN_UNPLUG_ALL 7
+#define XEN_UNPLUG_IGNORE 8
+
+static inline int xen_must_unplug_nics(void) {
+#if (defined(CONFIG_XEN_NETDEV_FRONTEND) || \
+		defined(CONFIG_XEN_NETDEV_FRONTEND_MODULE)) && \
+		(defined(CONFIG_XEN_PLATFORM_PCI) || \
+		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+        return 1;
+#else
+        return 0;
+#endif
+}
+
+static inline int xen_must_unplug_disks(void) {
+#if (defined(CONFIG_XEN_BLKDEV_FRONTEND) || \
+		defined(CONFIG_XEN_BLKDEV_FRONTEND_MODULE)) && \
+		(defined(CONFIG_XEN_PLATFORM_PCI) || \
+		 defined(CONFIG_XEN_PLATFORM_PCI_MODULE))
+        return 1;
+#else
+        return 0;
+#endif
+}
+
+extern int xen_platform_pci_unplug;
+
+#endif /* _XEN_PLATFORM_PCI_H */
diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h
index 883a21bba24..46bc81ef74c 100644
--- a/include/xen/xen-ops.h
+++ b/include/xen/xen-ops.h
@@ -7,6 +7,7 @@ DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu);
 
 void xen_pre_suspend(void);
 void xen_post_suspend(int suspend_cancelled);
+void xen_hvm_post_suspend(int suspend_cancelled);
 
 void xen_mm_pin_all(void);
 void xen_mm_unpin_all(void);
@@ -14,4 +15,6 @@ void xen_mm_unpin_all(void);
 void xen_timer_resume(void);
 void xen_arch_resume(void);
 
+int xen_setup_shutdown_event(void);
+
 #endif /* INCLUDE_XEN_OPS_H */
diff --git a/init/Kconfig b/init/Kconfig
index 5cff9a980c3..cb64c5889e0 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1143,30 +1143,6 @@ config TRACEPOINTS
 
 source "arch/Kconfig"
 
-config SLOW_WORK
-	default n
-	bool
-	help
-	  The slow work thread pool provides a number of dynamically allocated
-	  threads that can be used by the kernel to perform operations that
-	  take a relatively long time.
-
-	  An example of this would be CacheFiles doing a path lookup followed
-	  by a series of mkdirs and a create call, all of which have to touch
-	  disk.
-
-	  See Documentation/slow-work.txt.
-
-config SLOW_WORK_DEBUG
-	bool "Slow work debugging through debugfs"
-	default n
-	depends on SLOW_WORK && DEBUG_FS
-	help
-	  Display the contents of the slow work run queue through debugfs,
-	  including items currently executing.
-
-	  See Documentation/slow-work.txt.
-
 endmenu		# General setup
 
 config HAVE_GENERIC_DMA_COHERENT
diff --git a/init/main.c b/init/main.c
index 4ddb53f04f2..86cbfd085b0 100644
--- a/init/main.c
+++ b/init/main.c
@@ -32,7 +32,6 @@
 #include <linux/start_kernel.h>
 #include <linux/security.h>
 #include <linux/smp.h>
-#include <linux/workqueue.h>
 #include <linux/profile.h>
 #include <linux/rcupdate.h>
 #include <linux/moduleparam.h>
@@ -66,11 +65,9 @@
 #include <linux/ftrace.h>
 #include <linux/async.h>
 #include <linux/kmemcheck.h>
-#include <linux/kmemtrace.h>
 #include <linux/sfi.h>
 #include <linux/shmem_fs.h>
 #include <linux/slab.h>
-#include <trace/boot.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -444,7 +441,6 @@ static noinline void __init_refok rest_init(void)
 	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
 	rcu_read_unlock();
 	complete(&kthreadd_done);
-	unlock_kernel();
 
 	/*
 	 * The boot idle thread must execute schedule()
@@ -566,7 +562,6 @@ asmlinkage void __init start_kernel(void)
  * Interrupts are still disabled. Do necessary setups, then
  * enable them
  */
-	lock_kernel();
 	tick_init();
 	boot_cpu_init();
 	page_address_init();
@@ -664,7 +659,6 @@ asmlinkage void __init start_kernel(void)
 #endif
 	page_cgroup_init();
 	enable_debug_pagealloc();
-	kmemtrace_init();
 	kmemleak_init();
 	debug_objects_mem_init();
 	idr_init_cache();
@@ -726,38 +720,39 @@ int initcall_debug;
 core_param(initcall_debug, initcall_debug, bool, 0644);
 
 static char msgbuf[64];
-static struct boot_trace_call call;
-static struct boot_trace_ret ret;
 
-int do_one_initcall(initcall_t fn)
+static int __init_or_module do_one_initcall_debug(initcall_t fn)
 {
-	int count = preempt_count();
 	ktime_t calltime, delta, rettime;
+	unsigned long long duration;
+	int ret;
 
-	if (initcall_debug) {
-		call.caller = task_pid_nr(current);
-		printk("calling  %pF @ %i\n", fn, call.caller);
-		calltime = ktime_get();
-		trace_boot_call(&call, fn);
-		enable_boot_trace();
-	}
+	printk(KERN_DEBUG "calling  %pF @ %i\n", fn, task_pid_nr(current));
+	calltime = ktime_get();
+	ret = fn();
+	rettime = ktime_get();
+	delta = ktime_sub(rettime, calltime);
+	duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+	printk(KERN_DEBUG "initcall %pF returned %d after %lld usecs\n", fn,
+		ret, duration);
 
-	ret.result = fn();
+	return ret;
+}
 
-	if (initcall_debug) {
-		disable_boot_trace();
-		rettime = ktime_get();
-		delta = ktime_sub(rettime, calltime);
-		ret.duration = (unsigned long long) ktime_to_ns(delta) >> 10;
-		trace_boot_ret(&ret, fn);
-		printk("initcall %pF returned %d after %Ld usecs\n", fn,
-			ret.result, ret.duration);
-	}
+int __init_or_module do_one_initcall(initcall_t fn)
+{
+	int count = preempt_count();
+	int ret;
+
+	if (initcall_debug)
+		ret = do_one_initcall_debug(fn);
+	else
+		ret = fn();
 
 	msgbuf[0] = 0;
 
-	if (ret.result && ret.result != -ENODEV && initcall_debug)
-		sprintf(msgbuf, "error code %d ", ret.result);
+	if (ret && ret != -ENODEV && initcall_debug)
+		sprintf(msgbuf, "error code %d ", ret);
 
 	if (preempt_count() != count) {
 		strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
@@ -771,7 +766,7 @@ int do_one_initcall(initcall_t fn)
 		printk("initcall %pF returned with %s\n", fn, msgbuf);
 	}
 
-	return ret.result;
+	return ret;
 }
 
 
@@ -797,7 +792,6 @@ static void __init do_initcalls(void)
  */
 static void __init do_basic_setup(void)
 {
-	init_workqueues();
 	cpuset_init_smp();
 	usermodehelper_init();
 	init_tmpfs();
@@ -830,7 +824,6 @@ static noinline int init_post(void)
 	/* need to finish all async __init code before freeing the memory */
 	async_synchronize_full();
 	free_initmem();
-	unlock_kernel();
 	mark_rodata_ro();
 	system_state = SYSTEM_RUNNING;
 	numa_default_policy();
@@ -870,8 +863,6 @@ static int __init kernel_init(void * unused)
 	 * Wait until kthreadd is all set-up.
 	 */
 	wait_for_completion(&kthreadd_done);
-	lock_kernel();
-
 	/*
 	 * init can allocate pages on any node
 	 */
@@ -895,7 +886,6 @@ static int __init kernel_init(void * unused)
 	smp_prepare_cpus(setup_max_cpus);
 
 	do_pre_smp_initcalls();
-	start_boot_trace();
 
 	smp_init();
 	sched_init_smp();
diff --git a/kernel/Makefile b/kernel/Makefile
index 057472fbc27..c53e491e25a 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -76,8 +76,8 @@ obj-$(CONFIG_GCOV_KERNEL) += gcov/
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_KGDB) += debug/
-obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
+obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
 obj-$(CONFIG_SECCOMP) += seccomp.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
@@ -99,8 +99,6 @@ obj-$(CONFIG_TRACING) += trace/
 obj-$(CONFIG_X86_DS) += trace/
 obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
-obj-$(CONFIG_SLOW_WORK) += slow-work.o
-obj-$(CONFIG_SLOW_WORK_DEBUG) += slow-work-debugfs.o
 obj-$(CONFIG_PERF_EVENTS) += perf_event.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
diff --git a/kernel/async.c b/kernel/async.c
index 15319d6c18f..cd9dbb913c7 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -49,40 +49,33 @@ asynchronous and synchronous parts of the kernel.
 */
 
 #include <linux/async.h>
-#include <linux/bug.h>
 #include <linux/module.h>
 #include <linux/wait.h>
 #include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kthread.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 #include <asm/atomic.h>
 
 static async_cookie_t next_cookie = 1;
 
-#define MAX_THREADS	256
 #define MAX_WORK	32768
 
 static LIST_HEAD(async_pending);
 static LIST_HEAD(async_running);
 static DEFINE_SPINLOCK(async_lock);
 
-static int async_enabled = 0;
-
 struct async_entry {
-	struct list_head list;
-	async_cookie_t   cookie;
-	async_func_ptr	 *func;
-	void             *data;
-	struct list_head *running;
+	struct list_head	list;
+	struct work_struct	work;
+	async_cookie_t		cookie;
+	async_func_ptr		*func;
+	void			*data;
+	struct list_head	*running;
 };
 
 static DECLARE_WAIT_QUEUE_HEAD(async_done);
-static DECLARE_WAIT_QUEUE_HEAD(async_new);
 
 static atomic_t entry_count;
-static atomic_t thread_count;
 
 extern int initcall_debug;
 
@@ -117,27 +110,23 @@ static async_cookie_t  lowest_in_progress(struct list_head *running)
 	spin_unlock_irqrestore(&async_lock, flags);
 	return ret;
 }
+
 /*
  * pick the first pending entry and run it
  */
-static void run_one_entry(void)
+static void async_run_entry_fn(struct work_struct *work)
 {
+	struct async_entry *entry =
+		container_of(work, struct async_entry, work);
 	unsigned long flags;
-	struct async_entry *entry;
 	ktime_t calltime, delta, rettime;
 
-	/* 1) pick one task from the pending queue */
-
+	/* 1) move self to the running queue */
 	spin_lock_irqsave(&async_lock, flags);
-	if (list_empty(&async_pending))
-		goto out;
-	entry = list_first_entry(&async_pending, struct async_entry, list);
-
-	/* 2) move it to the running queue */
 	list_move_tail(&entry->list, entry->running);
 	spin_unlock_irqrestore(&async_lock, flags);
 
-	/* 3) run it (and print duration)*/
+	/* 2) run (and print duration) */
 	if (initcall_debug && system_state == SYSTEM_BOOTING) {
 		printk("calling  %lli_%pF @ %i\n", (long long)entry->cookie,
 			entry->func, task_pid_nr(current));
@@ -153,31 +142,25 @@ static void run_one_entry(void)
 			(long long)ktime_to_ns(delta) >> 10);
 	}
 
-	/* 4) remove it from the running queue */
+	/* 3) remove self from the running queue */
 	spin_lock_irqsave(&async_lock, flags);
 	list_del(&entry->list);
 
-	/* 5) free the entry  */
+	/* 4) free the entry */
 	kfree(entry);
 	atomic_dec(&entry_count);
 
 	spin_unlock_irqrestore(&async_lock, flags);
 
-	/* 6) wake up any waiters. */
+	/* 5) wake up any waiters */
 	wake_up(&async_done);
-	return;
-
-out:
-	spin_unlock_irqrestore(&async_lock, flags);
 }
 
-
 static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct list_head *running)
 {
 	struct async_entry *entry;
 	unsigned long flags;
 	async_cookie_t newcookie;
-	
 
 	/* allow irq-off callers */
 	entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
@@ -186,7 +169,7 @@ static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct l
 	 * If we're out of memory or if there's too much work
 	 * pending already, we execute synchronously.
 	 */
-	if (!async_enabled || !entry || atomic_read(&entry_count) > MAX_WORK) {
+	if (!entry || atomic_read(&entry_count) > MAX_WORK) {
 		kfree(entry);
 		spin_lock_irqsave(&async_lock, flags);
 		newcookie = next_cookie++;
@@ -196,6 +179,7 @@ static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct l
 		ptr(data, newcookie);
 		return newcookie;
 	}
+	INIT_WORK(&entry->work, async_run_entry_fn);
 	entry->func = ptr;
 	entry->data = data;
 	entry->running = running;
@@ -205,7 +189,10 @@ static async_cookie_t __async_schedule(async_func_ptr *ptr, void *data, struct l
 	list_add_tail(&entry->list, &async_pending);
 	atomic_inc(&entry_count);
 	spin_unlock_irqrestore(&async_lock, flags);
-	wake_up(&async_new);
+
+	/* schedule for execution */
+	queue_work(system_unbound_wq, &entry->work);
+
 	return newcookie;
 }
 
@@ -312,87 +299,3 @@ void async_synchronize_cookie(async_cookie_t cookie)
 	async_synchronize_cookie_domain(cookie, &async_running);
 }
 EXPORT_SYMBOL_GPL(async_synchronize_cookie);
-
-
-static int async_thread(void *unused)
-{
-	DECLARE_WAITQUEUE(wq, current);
-	add_wait_queue(&async_new, &wq);
-
-	while (!kthread_should_stop()) {
-		int ret = HZ;
-		set_current_state(TASK_INTERRUPTIBLE);
-		/*
-		 * check the list head without lock.. false positives
-		 * are dealt with inside run_one_entry() while holding
-		 * the lock.
-		 */
-		rmb();
-		if (!list_empty(&async_pending))
-			run_one_entry();
-		else
-			ret = schedule_timeout(HZ);
-
-		if (ret == 0) {
-			/*
-			 * we timed out, this means we as thread are redundant.
-			 * we sign off and die, but we to avoid any races there
-			 * is a last-straw check to see if work snuck in.
-			 */
-			atomic_dec(&thread_count);
-			wmb(); /* manager must see our departure first */
-			if (list_empty(&async_pending))
-				break;
-			/*
-			 * woops work came in between us timing out and us
-			 * signing off; we need to stay alive and keep working.
-			 */
-			atomic_inc(&thread_count);
-		}
-	}
-	remove_wait_queue(&async_new, &wq);
-
-	return 0;
-}
-
-static int async_manager_thread(void *unused)
-{
-	DECLARE_WAITQUEUE(wq, current);
-	add_wait_queue(&async_new, &wq);
-
-	while (!kthread_should_stop()) {
-		int tc, ec;
-
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		tc = atomic_read(&thread_count);
-		rmb();
-		ec = atomic_read(&entry_count);
-
-		while (tc < ec && tc < MAX_THREADS) {
-			if (IS_ERR(kthread_run(async_thread, NULL, "async/%i",
-					       tc))) {
-				msleep(100);
-				continue;
-			}
-			atomic_inc(&thread_count);
-			tc++;
-		}
-
-		schedule();
-	}
-	remove_wait_queue(&async_new, &wq);
-
-	return 0;
-}
-
-static int __init async_init(void)
-{
-	async_enabled =
-		!IS_ERR(kthread_run(async_manager_thread, NULL, "async/mgr"));
-
-	WARN_ON(!async_enabled);
-	return 0;
-}
-
-core_initcall(async_init);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index a8ce0995440..d83cab06da8 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1623,6 +1623,8 @@ static struct file_system_type cgroup_fs_type = {
 	.kill_sb = cgroup_kill_sb,
 };
 
+static struct kobject *cgroup_kobj;
+
 static inline struct cgroup *__d_cgrp(struct dentry *dentry)
 {
 	return dentry->d_fsdata;
@@ -3894,9 +3896,18 @@ int __init cgroup_init(void)
 	hhead = css_set_hash(init_css_set.subsys);
 	hlist_add_head(&init_css_set.hlist, hhead);
 	BUG_ON(!init_root_id(&rootnode));
+
+	cgroup_kobj = kobject_create_and_add("cgroup", fs_kobj);
+	if (!cgroup_kobj) {
+		err = -ENOMEM;
+		goto out;
+	}
+
 	err = register_filesystem(&cgroup_fs_type);
-	if (err < 0)
+	if (err < 0) {
+		kobject_put(cgroup_kobj);
 		goto out;
+	}
 
 	proc_create("cgroups", 0, NULL, &proc_cgroupstats_operations);
 
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 97d1b426a4a..f6e726f1849 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -235,11 +235,8 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 		return -EINVAL;
 
 	cpu_hotplug_begin();
-	set_cpu_active(cpu, false);
 	err = __cpu_notify(CPU_DOWN_PREPARE | mod, hcpu, -1, &nr_calls);
 	if (err) {
-		set_cpu_active(cpu, true);
-
 		nr_calls--;
 		__cpu_notify(CPU_DOWN_FAILED | mod, hcpu, nr_calls, NULL);
 		printk("%s: attempt to take down CPU %u failed\n",
@@ -249,7 +246,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 
 	err = __stop_machine(take_cpu_down, &tcd_param, cpumask_of(cpu));
 	if (err) {
-		set_cpu_active(cpu, true);
 		/* CPU didn't die: tell everyone.  Can't complain. */
 		cpu_notify_nofail(CPU_DOWN_FAILED | mod, hcpu);
 
@@ -321,8 +317,6 @@ static int __cpuinit _cpu_up(unsigned int cpu, int tasks_frozen)
 		goto out_notify;
 	BUG_ON(!cpu_online(cpu));
 
-	set_cpu_active(cpu, true);
-
 	/* Now call notifier in preparation. */
 	cpu_notify(CPU_ONLINE | mod, hcpu);
 
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 7cb37d86a00..b23c0979bbe 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2113,31 +2113,17 @@ static void scan_for_empty_cpusets(struct cpuset *root)
  * but making no active use of cpusets.
  *
  * This routine ensures that top_cpuset.cpus_allowed tracks
- * cpu_online_map on each CPU hotplug (cpuhp) event.
+ * cpu_active_mask on each CPU hotplug (cpuhp) event.
  *
  * Called within get_online_cpus().  Needs to call cgroup_lock()
  * before calling generate_sched_domains().
  */
-static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
-				unsigned long phase, void *unused_cpu)
+void cpuset_update_active_cpus(void)
 {
 	struct sched_domain_attr *attr;
 	cpumask_var_t *doms;
 	int ndoms;
 
-	switch (phase) {
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-		break;
-
-	default:
-		return NOTIFY_DONE;
-	}
-
 	cgroup_lock();
 	mutex_lock(&callback_mutex);
 	cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
@@ -2148,8 +2134,6 @@ static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
 
 	/* Have scheduler rebuild the domains */
 	partition_sched_domains(ndoms, doms, attr);
-
-	return NOTIFY_OK;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
@@ -2203,7 +2187,6 @@ void __init cpuset_init_smp(void)
 	cpumask_copy(top_cpuset.cpus_allowed, cpu_active_mask);
 	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
 
-	hotcpu_notifier(cpuset_track_online_cpus, 0);
 	hotplug_memory_notifier(cpuset_track_online_nodes, 10);
 
 	cpuset_wq = create_singlethread_workqueue("cpuset");
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 51d14fe8764..3c2d4972d23 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -605,6 +605,8 @@ cpu_master_loop:
 		if (dbg_kdb_mode) {
 			kgdb_connected = 1;
 			error = kdb_stub(ks);
+			if (error == -1)
+				continue;
 			kgdb_connected = 0;
 		} else {
 			error = gdb_serial_stub(ks);
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index 6e81fd59566..481a7bd2dfe 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -52,17 +52,6 @@ static unsigned long		gdb_regs[(NUMREGBYTES +
  * GDB remote protocol parser:
  */
 
-static int hex(char ch)
-{
-	if ((ch >= 'a') && (ch <= 'f'))
-		return ch - 'a' + 10;
-	if ((ch >= '0') && (ch <= '9'))
-		return ch - '0';
-	if ((ch >= 'A') && (ch <= 'F'))
-		return ch - 'A' + 10;
-	return -1;
-}
-
 #ifdef CONFIG_KGDB_KDB
 static int gdbstub_read_wait(void)
 {
@@ -123,8 +112,8 @@ static void get_packet(char *buffer)
 		buffer[count] = 0;
 
 		if (ch == '#') {
-			xmitcsum = hex(gdbstub_read_wait()) << 4;
-			xmitcsum += hex(gdbstub_read_wait());
+			xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
+			xmitcsum += hex_to_bin(gdbstub_read_wait());
 
 			if (checksum != xmitcsum)
 				/* failed checksum */
@@ -236,7 +225,7 @@ void gdbstub_msg_write(const char *s, int len)
  * buf.  Return a pointer to the last char put in buf (null). May
  * return an error.
  */
-int kgdb_mem2hex(char *mem, char *buf, int count)
+char *kgdb_mem2hex(char *mem, char *buf, int count)
 {
 	char *tmp;
 	int err;
@@ -248,17 +237,16 @@ int kgdb_mem2hex(char *mem, char *buf, int count)
 	tmp = buf + count;
 
 	err = probe_kernel_read(tmp, mem, count);
-	if (!err) {
-		while (count > 0) {
-			buf = pack_hex_byte(buf, *tmp);
-			tmp++;
-			count--;
-		}
-
-		*buf = 0;
+	if (err)
+		return NULL;
+	while (count > 0) {
+		buf = pack_hex_byte(buf, *tmp);
+		tmp++;
+		count--;
 	}
+	*buf = 0;
 
-	return err;
+	return buf;
 }
 
 /*
@@ -280,8 +268,8 @@ int kgdb_hex2mem(char *buf, char *mem, int count)
 	tmp_hex = tmp_raw - 1;
 	while (tmp_hex >= buf) {
 		tmp_raw--;
-		*tmp_raw = hex(*tmp_hex--);
-		*tmp_raw |= hex(*tmp_hex--) << 4;
+		*tmp_raw = hex_to_bin(*tmp_hex--);
+		*tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
 	}
 
 	return probe_kernel_write(mem, tmp_raw, count);
@@ -304,7 +292,7 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val)
 		(*ptr)++;
 	}
 	while (**ptr) {
-		hex_val = hex(**ptr);
+		hex_val = hex_to_bin(**ptr);
 		if (hex_val < 0)
 			break;
 
@@ -339,6 +327,32 @@ static int kgdb_ebin2mem(char *buf, char *mem, int count)
 	return probe_kernel_write(mem, c, size);
 }
 
+#if DBG_MAX_REG_NUM > 0
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	int idx = 0;
+	char *ptr = (char *)gdb_regs;
+
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		dbg_get_reg(i, ptr + idx, regs);
+		idx += dbg_reg_def[i].size;
+	}
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int i;
+	int idx = 0;
+	char *ptr = (char *)gdb_regs;
+
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		dbg_set_reg(i, ptr + idx, regs);
+		idx += dbg_reg_def[i].size;
+	}
+}
+#endif /* DBG_MAX_REG_NUM > 0 */
+
 /* Write memory due to an 'M' or 'X' packet. */
 static int write_mem_msg(int binary)
 {
@@ -378,28 +392,31 @@ static void error_packet(char *pkt, int error)
  * remapped to negative TIDs.
  */
 
-#define BUF_THREAD_ID_SIZE	16
+#define BUF_THREAD_ID_SIZE	8
 
 static char *pack_threadid(char *pkt, unsigned char *id)
 {
-	char *limit;
+	unsigned char *limit;
+	int lzero = 1;
+
+	limit = id + (BUF_THREAD_ID_SIZE / 2);
+	while (id < limit) {
+		if (!lzero || *id != 0) {
+			pkt = pack_hex_byte(pkt, *id);
+			lzero = 0;
+		}
+		id++;
+	}
 
-	limit = pkt + BUF_THREAD_ID_SIZE;
-	while (pkt < limit)
-		pkt = pack_hex_byte(pkt, *id++);
+	if (lzero)
+		pkt = pack_hex_byte(pkt, 0);
 
 	return pkt;
 }
 
 static void int_to_threadref(unsigned char *id, int value)
 {
-	unsigned char *scan;
-	int i = 4;
-
-	scan = (unsigned char *)id;
-	while (i--)
-		*scan++ = 0;
-	put_unaligned_be32(value, scan);
+	put_unaligned_be32(value, id);
 }
 
 static struct task_struct *getthread(struct pt_regs *regs, int tid)
@@ -463,8 +480,7 @@ static void gdb_cmd_status(struct kgdb_state *ks)
 	pack_hex_byte(&remcom_out_buffer[1], ks->signo);
 }
 
-/* Handle the 'g' get registers request */
-static void gdb_cmd_getregs(struct kgdb_state *ks)
+static void gdb_get_regs_helper(struct kgdb_state *ks)
 {
 	struct task_struct *thread;
 	void *local_debuggerinfo;
@@ -505,6 +521,12 @@ static void gdb_cmd_getregs(struct kgdb_state *ks)
 		 */
 		sleeping_thread_to_gdb_regs(gdb_regs, thread);
 	}
+}
+
+/* Handle the 'g' get registers request */
+static void gdb_cmd_getregs(struct kgdb_state *ks)
+{
+	gdb_get_regs_helper(ks);
 	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
 }
 
@@ -527,13 +549,13 @@ static void gdb_cmd_memread(struct kgdb_state *ks)
 	char *ptr = &remcom_in_buffer[1];
 	unsigned long length;
 	unsigned long addr;
-	int err;
+	char *err;
 
 	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
 					kgdb_hex2long(&ptr, &length) > 0) {
 		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
-		if (err)
-			error_packet(remcom_out_buffer, err);
+		if (!err)
+			error_packet(remcom_out_buffer, -EINVAL);
 	} else {
 		error_packet(remcom_out_buffer, -EINVAL);
 	}
@@ -550,6 +572,60 @@ static void gdb_cmd_memwrite(struct kgdb_state *ks)
 		strcpy(remcom_out_buffer, "OK");
 }
 
+#if DBG_MAX_REG_NUM > 0
+static char *gdb_hex_reg_helper(int regnum, char *out)
+{
+	int i;
+	int offset = 0;
+
+	for (i = 0; i < regnum; i++)
+		offset += dbg_reg_def[i].size;
+	return kgdb_mem2hex((char *)gdb_regs + offset, out,
+			    dbg_reg_def[i].size);
+}
+
+/* Handle the 'p' individual regster get */
+static void gdb_cmd_reg_get(struct kgdb_state *ks)
+{
+	unsigned long regnum;
+	char *ptr = &remcom_in_buffer[1];
+
+	kgdb_hex2long(&ptr, &regnum);
+	if (regnum >= DBG_MAX_REG_NUM) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	gdb_get_regs_helper(ks);
+	gdb_hex_reg_helper(regnum, remcom_out_buffer);
+}
+
+/* Handle the 'P' individual regster set */
+static void gdb_cmd_reg_set(struct kgdb_state *ks)
+{
+	unsigned long regnum;
+	char *ptr = &remcom_in_buffer[1];
+	int i = 0;
+
+	kgdb_hex2long(&ptr, &regnum);
+	if (*ptr++ != '=' ||
+	    !(!kgdb_usethread || kgdb_usethread == current) ||
+	    !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
+		error_packet(remcom_out_buffer, -EINVAL);
+		return;
+	}
+	memset(gdb_regs, 0, sizeof(gdb_regs));
+	while (i < sizeof(gdb_regs) * 2)
+		if (hex_to_bin(ptr[i]) >= 0)
+			i++;
+		else
+			break;
+	i = i / 2;
+	kgdb_hex2mem(ptr, (char *)gdb_regs, i);
+	dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
+	strcpy(remcom_out_buffer, "OK");
+}
+#endif /* DBG_MAX_REG_NUM > 0 */
+
 /* Handle the 'X' memory binary write bytes */
 static void gdb_cmd_binwrite(struct kgdb_state *ks)
 {
@@ -612,7 +688,7 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 {
 	struct task_struct *g;
 	struct task_struct *p;
-	unsigned char thref[8];
+	unsigned char thref[BUF_THREAD_ID_SIZE];
 	char *ptr;
 	int i;
 	int cpu;
@@ -632,8 +708,7 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 			for_each_online_cpu(cpu) {
 				ks->thr_query = 0;
 				int_to_threadref(thref, -cpu - 2);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
+				ptr = pack_threadid(ptr, thref);
 				*(ptr++) = ',';
 				i++;
 			}
@@ -642,8 +717,7 @@ static void gdb_cmd_query(struct kgdb_state *ks)
 		do_each_thread(g, p) {
 			if (i >= ks->thr_query && !finished) {
 				int_to_threadref(thref, p->pid);
-				pack_threadid(ptr, thref);
-				ptr += BUF_THREAD_ID_SIZE;
+				ptr = pack_threadid(ptr, thref);
 				*(ptr++) = ',';
 				ks->thr_query++;
 				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
@@ -858,11 +932,14 @@ int gdb_serial_stub(struct kgdb_state *ks)
 	int error = 0;
 	int tmp;
 
-	/* Clear the out buffer. */
+	/* Initialize comm buffer and globals. */
 	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+	kgdb_usethread = kgdb_info[ks->cpu].task;
+	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
+	ks->pass_exception = 0;
 
 	if (kgdb_connected) {
-		unsigned char thref[8];
+		unsigned char thref[BUF_THREAD_ID_SIZE];
 		char *ptr;
 
 		/* Reply to host that an exception has occurred */
@@ -876,10 +953,6 @@ int gdb_serial_stub(struct kgdb_state *ks)
 		put_packet(remcom_out_buffer);
 	}
 
-	kgdb_usethread = kgdb_info[ks->cpu].task;
-	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
-	ks->pass_exception = 0;
-
 	while (1) {
 		error = 0;
 
@@ -904,6 +977,14 @@ int gdb_serial_stub(struct kgdb_state *ks)
 		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
 			gdb_cmd_memwrite(ks);
 			break;
+#if DBG_MAX_REG_NUM > 0
+		case 'p': /* pXX Return gdb register XX (in hex) */
+			gdb_cmd_reg_get(ks);
+			break;
+		case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
+			gdb_cmd_reg_set(ks);
+			break;
+#endif /* DBG_MAX_REG_NUM > 0 */
 		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
 			gdb_cmd_binwrite(ks);
 			break;
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index ebe4a287419..28b844118bb 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -312,7 +312,7 @@ int kdbgetularg(const char *arg, unsigned long *value)
 
 	if (endp == arg) {
 		/*
-		 * Try base 16, for us folks too lazy to type the
+		 * Also try base 16, for us folks too lazy to type the
 		 * leading 0x...
 		 */
 		val = simple_strtoul(arg, &endp, 16);
@@ -325,6 +325,25 @@ int kdbgetularg(const char *arg, unsigned long *value)
 	return 0;
 }
 
+int kdbgetu64arg(const char *arg, u64 *value)
+{
+	char *endp;
+	u64 val;
+
+	val = simple_strtoull(arg, &endp, 0);
+
+	if (endp == arg) {
+
+		val = simple_strtoull(arg, &endp, 16);
+		if (endp == arg)
+			return KDB_BADINT;
+	}
+
+	*value = val;
+
+	return 0;
+}
+
 /*
  * kdb_set - This function implements the 'set' command.  Alter an
  *	existing environment variable or create a new one.
@@ -1770,11 +1789,65 @@ static int kdb_go(int argc, const char **argv)
  */
 static int kdb_rd(int argc, const char **argv)
 {
-	int diag = kdb_check_regs();
-	if (diag)
-		return diag;
+	int len = kdb_check_regs();
+#if DBG_MAX_REG_NUM > 0
+	int i;
+	char *rname;
+	int rsize;
+	u64 reg64;
+	u32 reg32;
+	u16 reg16;
+	u8 reg8;
+
+	if (len)
+		return len;
+
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		rsize = dbg_reg_def[i].size * 2;
+		if (rsize > 16)
+			rsize = 2;
+		if (len + strlen(dbg_reg_def[i].name) + 4 + rsize > 80) {
+			len = 0;
+			kdb_printf("\n");
+		}
+		if (len)
+			len += kdb_printf("  ");
+		switch(dbg_reg_def[i].size * 8) {
+		case 8:
+			rname = dbg_get_reg(i, &reg8, kdb_current_regs);
+			if (!rname)
+				break;
+			len += kdb_printf("%s: %02x", rname, reg8);
+			break;
+		case 16:
+			rname = dbg_get_reg(i, &reg16, kdb_current_regs);
+			if (!rname)
+				break;
+			len += kdb_printf("%s: %04x", rname, reg16);
+			break;
+		case 32:
+			rname = dbg_get_reg(i, &reg32, kdb_current_regs);
+			if (!rname)
+				break;
+			len += kdb_printf("%s: %08x", rname, reg32);
+			break;
+		case 64:
+			rname = dbg_get_reg(i, &reg64, kdb_current_regs);
+			if (!rname)
+				break;
+			len += kdb_printf("%s: %016llx", rname, reg64);
+			break;
+		default:
+			len += kdb_printf("%s: ??", dbg_reg_def[i].name);
+		}
+	}
+	kdb_printf("\n");
+#else
+	if (len)
+		return len;
 
 	kdb_dumpregs(kdb_current_regs);
+#endif
 	return 0;
 }
 
@@ -1782,32 +1855,67 @@ static int kdb_rd(int argc, const char **argv)
  * kdb_rm - This function implements the 'rm' (register modify)  command.
  *	rm register-name new-contents
  * Remarks:
- *	Currently doesn't allow modification of control or
- *	debug registers.
+ *	Allows register modification with the same restrictions as gdb
  */
 static int kdb_rm(int argc, const char **argv)
 {
+#if DBG_MAX_REG_NUM > 0
 	int diag;
-	int ind = 0;
-	unsigned long contents;
+	const char *rname;
+	int i;
+	u64 reg64;
+	u32 reg32;
+	u16 reg16;
+	u8 reg8;
 
 	if (argc != 2)
 		return KDB_ARGCOUNT;
 	/*
 	 * Allow presence or absence of leading '%' symbol.
 	 */
-	if (argv[1][0] == '%')
-		ind = 1;
+	rname = argv[1];
+	if (*rname == '%')
+		rname++;
 
-	diag = kdbgetularg(argv[2], &contents);
+	diag = kdbgetu64arg(argv[2], &reg64);
 	if (diag)
 		return diag;
 
 	diag = kdb_check_regs();
 	if (diag)
 		return diag;
+
+	diag = KDB_BADREG;
+	for (i = 0; i < DBG_MAX_REG_NUM; i++) {
+		if (strcmp(rname, dbg_reg_def[i].name) == 0) {
+			diag = 0;
+			break;
+		}
+	}
+	if (!diag) {
+		switch(dbg_reg_def[i].size * 8) {
+		case 8:
+			reg8 = reg64;
+			dbg_set_reg(i, &reg8, kdb_current_regs);
+			break;
+		case 16:
+			reg16 = reg64;
+			dbg_set_reg(i, &reg16, kdb_current_regs);
+			break;
+		case 32:
+			reg32 = reg64;
+			dbg_set_reg(i, &reg32, kdb_current_regs);
+			break;
+		case 64:
+			dbg_set_reg(i, &reg64, kdb_current_regs);
+			break;
+		}
+	}
+	return diag;
+#else
 	kdb_printf("ERROR: Register set currently not implemented\n");
-	return 0;
+    return 0;
+#endif
 }
 
 #if defined(CONFIG_MAGIC_SYSRQ)
@@ -2440,6 +2548,7 @@ static void kdb_sysinfo(struct sysinfo *val)
  */
 static int kdb_summary(int argc, const char **argv)
 {
+	struct timespec now;
 	struct kdb_tm tm;
 	struct sysinfo val;
 
@@ -2454,7 +2563,8 @@ static int kdb_summary(int argc, const char **argv)
 	kdb_printf("domainname %s\n", init_uts_ns.name.domainname);
 	kdb_printf("ccversion  %s\n", __stringify(CCVERSION));
 
-	kdb_gmtime(&xtime, &tm);
+	now = __current_kernel_time();
+	kdb_gmtime(&now, &tm);
 	kdb_printf("date       %04d-%02d-%02d %02d:%02d:%02d "
 		   "tz_minuteswest %d\n",
 		1900+tm.tm_year, tm.tm_mon+1, tm.tm_mday,
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 97d3ba69775..c438f545a32 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -144,9 +144,7 @@ extern int kdb_getword(unsigned long *, unsigned long, size_t);
 extern int kdb_putword(unsigned long, unsigned long, size_t);
 
 extern int kdbgetularg(const char *, unsigned long *);
-extern int kdb_set(int, const char **);
 extern char *kdbgetenv(const char *);
-extern int kdbgetintenv(const char *, int *);
 extern int kdbgetaddrarg(int, const char **, int*, unsigned long *,
 			 long *, char **);
 extern int kdbgetsymval(const char *, kdb_symtab_t *);
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index dd62f8e714c..0dbeae37422 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -134,23 +134,14 @@ unregister:
 	return 0;
 }
 
-int
-__set_personality(unsigned int personality)
+int __set_personality(unsigned int personality)
 {
-	struct exec_domain	*ep, *oep;
-
-	ep = lookup_exec_domain(personality);
-	if (ep == current_thread_info()->exec_domain) {
-		current->personality = personality;
-		module_put(ep->module);
-		return 0;
-	}
+	struct exec_domain *oep = current_thread_info()->exec_domain;
 
+	current_thread_info()->exec_domain = lookup_exec_domain(personality);
 	current->personality = personality;
-	oep = current_thread_info()->exec_domain;
-	current_thread_info()->exec_domain = ep;
-
 	module_put(oep->module);
+
 	return 0;
 }
 
@@ -192,11 +183,8 @@ SYSCALL_DEFINE1(personality, unsigned int, personality)
 {
 	unsigned int old = current->personality;
 
-	if (personality != 0xffffffff) {
+	if (personality != 0xffffffff)
 		set_personality(personality);
-		if (current->personality != personality)
-			return -EINVAL;
-	}
 
 	return old;
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index b6cce14ba04..98b450876f9 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -899,6 +899,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	tty_audit_fork(sig);
 
 	sig->oom_adj = current->signal->oom_adj;
+	sig->oom_score_adj = current->signal->oom_score_adj;
 
 	return 0;
 }
@@ -907,7 +908,7 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p)
 {
 	unsigned long new_flags = p->flags;
 
-	new_flags &= ~PF_SUPERPRIV;
+	new_flags &= ~(PF_SUPERPRIV | PF_WQ_WORKER);
 	new_flags |= PF_FORKNOEXEC;
 	new_flags |= PF_STARTING;
 	p->flags = new_flags;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 5c69e996bd0..ce669174f35 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -90,7 +90,7 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 	do {
 		seq = read_seqbegin(&xtime_lock);
 		xts = __current_kernel_time();
-		tom = wall_to_monotonic;
+		tom = __get_wall_to_monotonic();
 	} while (read_seqretry(&xtime_lock, seq));
 
 	xtim = timespec_to_ktime(xts);
@@ -144,12 +144,8 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
 static int hrtimer_get_target(int this_cpu, int pinned)
 {
 #ifdef CONFIG_NO_HZ
-	if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
-		int preferred_cpu = get_nohz_load_balancer();
-
-		if (preferred_cpu >= 0)
-			return preferred_cpu;
-	}
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu))
+		return get_nohz_timer_target();
 #endif
 	return this_cpu;
 }
@@ -612,7 +608,7 @@ static int hrtimer_reprogram(struct hrtimer *timer,
 static void retrigger_next_event(void *arg)
 {
 	struct hrtimer_cpu_base *base;
-	struct timespec realtime_offset;
+	struct timespec realtime_offset, wtm;
 	unsigned long seq;
 
 	if (!hrtimer_hres_active())
@@ -620,10 +616,9 @@ static void retrigger_next_event(void *arg)
 
 	do {
 		seq = read_seqbegin(&xtime_lock);
-		set_normalized_timespec(&realtime_offset,
-					-wall_to_monotonic.tv_sec,
-					-wall_to_monotonic.tv_nsec);
+		wtm = __get_wall_to_monotonic();
 	} while (read_seqretry(&xtime_lock, seq));
+	set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
 
 	base = &__get_cpu_var(hrtimer_bases);
 
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 7a56b22e060..d71a987fd2b 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -41,6 +41,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/list.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
 
@@ -62,6 +63,9 @@ static DEFINE_PER_CPU(unsigned int, nr_bp_flexible[TYPE_MAX]);
 
 static int nr_slots[TYPE_MAX];
 
+/* Keep track of the breakpoints attached to tasks */
+static LIST_HEAD(bp_task_head);
+
 static int constraints_initialized;
 
 /* Gather the number of total pinned and un-pinned bp in a cpuset */
@@ -103,33 +107,21 @@ static unsigned int max_task_bp_pinned(int cpu, enum bp_type_idx type)
 	return 0;
 }
 
-static int task_bp_pinned(struct task_struct *tsk, enum bp_type_idx type)
+/*
+ * Count the number of breakpoints of the same type and same task.
+ * The given event must be not on the list.
+ */
+static int task_bp_pinned(struct perf_event *bp, enum bp_type_idx type)
 {
-	struct perf_event_context *ctx = tsk->perf_event_ctxp;
-	struct list_head *list;
-	struct perf_event *bp;
-	unsigned long flags;
+	struct perf_event_context *ctx = bp->ctx;
+	struct perf_event *iter;
 	int count = 0;
 
-	if (WARN_ONCE(!ctx, "No perf context for this task"))
-		return 0;
-
-	list = &ctx->event_list;
-
-	raw_spin_lock_irqsave(&ctx->lock, flags);
-
-	/*
-	 * The current breakpoint counter is not included in the list
-	 * at the open() callback time
-	 */
-	list_for_each_entry(bp, list, event_entry) {
-		if (bp->attr.type == PERF_TYPE_BREAKPOINT)
-			if (find_slot_idx(bp) == type)
-				count += hw_breakpoint_weight(bp);
+	list_for_each_entry(iter, &bp_task_head, hw.bp_list) {
+		if (iter->ctx == ctx && find_slot_idx(iter) == type)
+			count += hw_breakpoint_weight(iter);
 	}
 
-	raw_spin_unlock_irqrestore(&ctx->lock, flags);
-
 	return count;
 }
 
@@ -149,7 +141,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp,
 		if (!tsk)
 			slots->pinned += max_task_bp_pinned(cpu, type);
 		else
-			slots->pinned += task_bp_pinned(tsk, type);
+			slots->pinned += task_bp_pinned(bp, type);
 		slots->flexible = per_cpu(nr_bp_flexible[type], cpu);
 
 		return;
@@ -162,7 +154,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp,
 		if (!tsk)
 			nr += max_task_bp_pinned(cpu, type);
 		else
-			nr += task_bp_pinned(tsk, type);
+			nr += task_bp_pinned(bp, type);
 
 		if (nr > slots->pinned)
 			slots->pinned = nr;
@@ -188,7 +180,7 @@ fetch_this_slot(struct bp_busy_slots *slots, int weight)
 /*
  * Add a pinned breakpoint for the given task in our constraint table
  */
-static void toggle_bp_task_slot(struct task_struct *tsk, int cpu, bool enable,
+static void toggle_bp_task_slot(struct perf_event *bp, int cpu, bool enable,
 				enum bp_type_idx type, int weight)
 {
 	unsigned int *tsk_pinned;
@@ -196,10 +188,11 @@ static void toggle_bp_task_slot(struct task_struct *tsk, int cpu, bool enable,
 	int old_idx = 0;
 	int idx = 0;
 
-	old_count = task_bp_pinned(tsk, type);
+	old_count = task_bp_pinned(bp, type);
 	old_idx = old_count - 1;
 	idx = old_idx + weight;
 
+	/* tsk_pinned[n] is the number of tasks having n breakpoints */
 	tsk_pinned = per_cpu(nr_task_bp_pinned[type], cpu);
 	if (enable) {
 		tsk_pinned[idx]++;
@@ -222,23 +215,41 @@ toggle_bp_slot(struct perf_event *bp, bool enable, enum bp_type_idx type,
 	int cpu = bp->cpu;
 	struct task_struct *tsk = bp->ctx->task;
 
+	/* Pinned counter cpu profiling */
+	if (!tsk) {
+
+		if (enable)
+			per_cpu(nr_cpu_bp_pinned[type], bp->cpu) += weight;
+		else
+			per_cpu(nr_cpu_bp_pinned[type], bp->cpu) -= weight;
+		return;
+	}
+
 	/* Pinned counter task profiling */
-	if (tsk) {
-		if (cpu >= 0) {
-			toggle_bp_task_slot(tsk, cpu, enable, type, weight);
-			return;
-		}
 
+	if (!enable)
+		list_del(&bp->hw.bp_list);
+
+	if (cpu >= 0) {
+		toggle_bp_task_slot(bp, cpu, enable, type, weight);
+	} else {
 		for_each_online_cpu(cpu)
-			toggle_bp_task_slot(tsk, cpu, enable, type, weight);
-		return;
+			toggle_bp_task_slot(bp, cpu, enable, type, weight);
 	}
 
-	/* Pinned counter cpu profiling */
 	if (enable)
-		per_cpu(nr_cpu_bp_pinned[type], bp->cpu) += weight;
-	else
-		per_cpu(nr_cpu_bp_pinned[type], bp->cpu) -= weight;
+		list_add_tail(&bp->hw.bp_list, &bp_task_head);
+}
+
+/*
+ * Function to perform processor-specific cleanup during unregistration
+ */
+__weak void arch_unregister_hw_breakpoint(struct perf_event *bp)
+{
+	/*
+	 * A weak stub function here for those archs that don't define
+	 * it inside arch/.../kernel/hw_breakpoint.c
+	 */
 }
 
 /*
@@ -301,6 +312,10 @@ static int __reserve_bp_slot(struct perf_event *bp)
 	weight = hw_breakpoint_weight(bp);
 
 	fetch_bp_busy_slots(&slots, bp, type);
+	/*
+	 * Simulate the addition of this breakpoint to the constraints
+	 * and see the result.
+	 */
 	fetch_this_slot(&slots, weight);
 
 	/* Flexible counters need to keep at least one slot */
@@ -339,6 +354,7 @@ void release_bp_slot(struct perf_event *bp)
 {
 	mutex_lock(&nr_bp_mutex);
 
+	arch_unregister_hw_breakpoint(bp);
 	__release_bp_slot(bp);
 
 	mutex_unlock(&nr_bp_mutex);
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index e1497481fe8..c3003e9d91a 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -216,7 +216,7 @@ static inline int setup_affinity(unsigned int irq, struct irq_desc *desc)
 void __disable_irq(struct irq_desc *desc, unsigned int irq, bool suspend)
 {
 	if (suspend) {
-		if (!desc->action || (desc->action->flags & IRQF_TIMER))
+		if (!desc->action || (desc->action->flags & IRQF_NO_SUSPEND))
 			return;
 		desc->status |= IRQ_SUSPENDED;
 	}
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 83911c78017..2dc3786349d 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -14,6 +14,8 @@
 #include <linux/file.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/freezer.h>
 #include <trace/events/sched.h>
 
 static DEFINE_SPINLOCK(kthread_create_lock);
@@ -35,6 +37,7 @@ struct kthread_create_info
 
 struct kthread {
 	int should_stop;
+	void *data;
 	struct completion exited;
 };
 
@@ -54,6 +57,19 @@ int kthread_should_stop(void)
 }
 EXPORT_SYMBOL(kthread_should_stop);
 
+/**
+ * kthread_data - return data value specified on kthread creation
+ * @task: kthread task in question
+ *
+ * Return the data value specified when kthread @task was created.
+ * The caller is responsible for ensuring the validity of @task when
+ * calling this function.
+ */
+void *kthread_data(struct task_struct *task)
+{
+	return to_kthread(task)->data;
+}
+
 static int kthread(void *_create)
 {
 	/* Copy data: it's on kthread's stack */
@@ -64,6 +80,7 @@ static int kthread(void *_create)
 	int ret;
 
 	self.should_stop = 0;
+	self.data = data;
 	init_completion(&self.exited);
 	current->vfork_done = &self.exited;
 
@@ -247,3 +264,150 @@ int kthreadd(void *unused)
 
 	return 0;
 }
+
+/**
+ * kthread_worker_fn - kthread function to process kthread_worker
+ * @worker_ptr: pointer to initialized kthread_worker
+ *
+ * This function can be used as @threadfn to kthread_create() or
+ * kthread_run() with @worker_ptr argument pointing to an initialized
+ * kthread_worker.  The started kthread will process work_list until
+ * the it is stopped with kthread_stop().  A kthread can also call
+ * this function directly after extra initialization.
+ *
+ * Different kthreads can be used for the same kthread_worker as long
+ * as there's only one kthread attached to it at any given time.  A
+ * kthread_worker without an attached kthread simply collects queued
+ * kthread_works.
+ */
+int kthread_worker_fn(void *worker_ptr)
+{
+	struct kthread_worker *worker = worker_ptr;
+	struct kthread_work *work;
+
+	WARN_ON(worker->task);
+	worker->task = current;
+repeat:
+	set_current_state(TASK_INTERRUPTIBLE);	/* mb paired w/ kthread_stop */
+
+	if (kthread_should_stop()) {
+		__set_current_state(TASK_RUNNING);
+		spin_lock_irq(&worker->lock);
+		worker->task = NULL;
+		spin_unlock_irq(&worker->lock);
+		return 0;
+	}
+
+	work = NULL;
+	spin_lock_irq(&worker->lock);
+	if (!list_empty(&worker->work_list)) {
+		work = list_first_entry(&worker->work_list,
+					struct kthread_work, node);
+		list_del_init(&work->node);
+	}
+	spin_unlock_irq(&worker->lock);
+
+	if (work) {
+		__set_current_state(TASK_RUNNING);
+		work->func(work);
+		smp_wmb();	/* wmb worker-b0 paired with flush-b1 */
+		work->done_seq = work->queue_seq;
+		smp_mb();	/* mb worker-b1 paired with flush-b0 */
+		if (atomic_read(&work->flushing))
+			wake_up_all(&work->done);
+	} else if (!freezing(current))
+		schedule();
+
+	try_to_freeze();
+	goto repeat;
+}
+EXPORT_SYMBOL_GPL(kthread_worker_fn);
+
+/**
+ * queue_kthread_work - queue a kthread_work
+ * @worker: target kthread_worker
+ * @work: kthread_work to queue
+ *
+ * Queue @work to work processor @task for async execution.  @task
+ * must have been created with kthread_worker_create().  Returns %true
+ * if @work was successfully queued, %false if it was already pending.
+ */
+bool queue_kthread_work(struct kthread_worker *worker,
+			struct kthread_work *work)
+{
+	bool ret = false;
+	unsigned long flags;
+
+	spin_lock_irqsave(&worker->lock, flags);
+	if (list_empty(&work->node)) {
+		list_add_tail(&work->node, &worker->work_list);
+		work->queue_seq++;
+		if (likely(worker->task))
+			wake_up_process(worker->task);
+		ret = true;
+	}
+	spin_unlock_irqrestore(&worker->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(queue_kthread_work);
+
+/**
+ * flush_kthread_work - flush a kthread_work
+ * @work: work to flush
+ *
+ * If @work is queued or executing, wait for it to finish execution.
+ */
+void flush_kthread_work(struct kthread_work *work)
+{
+	int seq = work->queue_seq;
+
+	atomic_inc(&work->flushing);
+
+	/*
+	 * mb flush-b0 paired with worker-b1, to make sure either
+	 * worker sees the above increment or we see done_seq update.
+	 */
+	smp_mb__after_atomic_inc();
+
+	/* A - B <= 0 tests whether B is in front of A regardless of overflow */
+	wait_event(work->done, seq - work->done_seq <= 0);
+	atomic_dec(&work->flushing);
+
+	/*
+	 * rmb flush-b1 paired with worker-b0, to make sure our caller
+	 * sees every change made by work->func().
+	 */
+	smp_mb__after_atomic_dec();
+}
+EXPORT_SYMBOL_GPL(flush_kthread_work);
+
+struct kthread_flush_work {
+	struct kthread_work	work;
+	struct completion	done;
+};
+
+static void kthread_flush_work_fn(struct kthread_work *work)
+{
+	struct kthread_flush_work *fwork =
+		container_of(work, struct kthread_flush_work, work);
+	complete(&fwork->done);
+}
+
+/**
+ * flush_kthread_worker - flush all current works on a kthread_worker
+ * @worker: worker to flush
+ *
+ * Wait until all currently executing or pending works on @worker are
+ * finished.
+ */
+void flush_kthread_worker(struct kthread_worker *worker)
+{
+	struct kthread_flush_work fwork = {
+		KTHREAD_WORK_INIT(fwork.work, kthread_flush_work_fn),
+		COMPLETION_INITIALIZER_ONSTACK(fwork.done),
+	};
+
+	queue_kthread_work(worker, &fwork.work);
+	wait_for_completion(&fwork.done);
+}
+EXPORT_SYMBOL_GPL(flush_kthread_worker);
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 54286798c37..f2852a51023 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -146,7 +146,7 @@ static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS],
 
 static inline u64 lockstat_clock(void)
 {
-	return cpu_clock(smp_processor_id());
+	return local_clock();
 }
 
 static int lock_point(unsigned long points[], unsigned long ip)
diff --git a/kernel/module.c b/kernel/module.c
index 6c562828c85..d0b5f8db11b 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1,6 +1,6 @@
 /*
    Copyright (C) 2002 Richard Henderson
-   Copyright (C) 2001 Rusty Russell, 2002 Rusty Russell IBM.
+   Copyright (C) 2001 Rusty Russell, 2002, 2010 Rusty Russell IBM.
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -110,6 +110,20 @@ int unregister_module_notifier(struct notifier_block * nb)
 }
 EXPORT_SYMBOL(unregister_module_notifier);
 
+struct load_info {
+	Elf_Ehdr *hdr;
+	unsigned long len;
+	Elf_Shdr *sechdrs;
+	char *secstrings, *strtab;
+	unsigned long *strmap;
+	unsigned long symoffs, stroffs;
+	struct _ddebug *debug;
+	unsigned int num_debug;
+	struct {
+		unsigned int sym, str, mod, vers, info, pcpu;
+	} index;
+};
+
 /* We require a truly strong try_module_get(): 0 means failure due to
    ongoing or failed initialization etc. */
 static inline int strong_try_module_get(struct module *mod)
@@ -140,42 +154,38 @@ void __module_put_and_exit(struct module *mod, long code)
 EXPORT_SYMBOL(__module_put_and_exit);
 
 /* Find a module section: 0 means not found. */
-static unsigned int find_sec(Elf_Ehdr *hdr,
-			     Elf_Shdr *sechdrs,
-			     const char *secstrings,
-			     const char *name)
+static unsigned int find_sec(const struct load_info *info, const char *name)
 {
 	unsigned int i;
 
-	for (i = 1; i < hdr->e_shnum; i++)
+	for (i = 1; i < info->hdr->e_shnum; i++) {
+		Elf_Shdr *shdr = &info->sechdrs[i];
 		/* Alloc bit cleared means "ignore it." */
-		if ((sechdrs[i].sh_flags & SHF_ALLOC)
-		    && strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
+		if ((shdr->sh_flags & SHF_ALLOC)
+		    && strcmp(info->secstrings + shdr->sh_name, name) == 0)
 			return i;
+	}
 	return 0;
 }
 
 /* Find a module section, or NULL. */
-static void *section_addr(Elf_Ehdr *hdr, Elf_Shdr *shdrs,
-			  const char *secstrings, const char *name)
+static void *section_addr(const struct load_info *info, const char *name)
 {
 	/* Section 0 has sh_addr 0. */
-	return (void *)shdrs[find_sec(hdr, shdrs, secstrings, name)].sh_addr;
+	return (void *)info->sechdrs[find_sec(info, name)].sh_addr;
 }
 
 /* Find a module section, or NULL.  Fill in number of "objects" in section. */
-static void *section_objs(Elf_Ehdr *hdr,
-			  Elf_Shdr *sechdrs,
-			  const char *secstrings,
+static void *section_objs(const struct load_info *info,
 			  const char *name,
 			  size_t object_size,
 			  unsigned int *num)
 {
-	unsigned int sec = find_sec(hdr, sechdrs, secstrings, name);
+	unsigned int sec = find_sec(info, name);
 
 	/* Section 0 has sh_addr 0 and sh_size 0. */
-	*num = sechdrs[sec].sh_size / object_size;
-	return (void *)sechdrs[sec].sh_addr;
+	*num = info->sechdrs[sec].sh_size / object_size;
+	return (void *)info->sechdrs[sec].sh_addr;
 }
 
 /* Provided by the linker */
@@ -227,7 +237,7 @@ bool each_symbol(bool (*fn)(const struct symsearch *arr, struct module *owner,
 			    unsigned int symnum, void *data), void *data)
 {
 	struct module *mod;
-	const struct symsearch arr[] = {
+	static const struct symsearch arr[] = {
 		{ __start___ksymtab, __stop___ksymtab, __start___kcrctab,
 		  NOT_GPL_ONLY, false },
 		{ __start___ksymtab_gpl, __stop___ksymtab_gpl,
@@ -392,7 +402,8 @@ static int percpu_modalloc(struct module *mod,
 	mod->percpu = __alloc_reserved_percpu(size, align);
 	if (!mod->percpu) {
 		printk(KERN_WARNING
-		       "Could not allocate %lu bytes percpu data\n", size);
+		       "%s: Could not allocate %lu bytes percpu data\n",
+		       mod->name, size);
 		return -ENOMEM;
 	}
 	mod->percpu_size = size;
@@ -404,11 +415,9 @@ static void percpu_modfree(struct module *mod)
 	free_percpu(mod->percpu);
 }
 
-static unsigned int find_pcpusec(Elf_Ehdr *hdr,
-				 Elf_Shdr *sechdrs,
-				 const char *secstrings)
+static unsigned int find_pcpusec(struct load_info *info)
 {
-	return find_sec(hdr, sechdrs, secstrings, ".data..percpu");
+	return find_sec(info, ".data..percpu");
 }
 
 static void percpu_modcopy(struct module *mod,
@@ -468,9 +477,7 @@ static inline int percpu_modalloc(struct module *mod,
 static inline void percpu_modfree(struct module *mod)
 {
 }
-static inline unsigned int find_pcpusec(Elf_Ehdr *hdr,
-					Elf_Shdr *sechdrs,
-					const char *secstrings)
+static unsigned int find_pcpusec(struct load_info *info)
 {
 	return 0;
 }
@@ -524,21 +531,21 @@ static char last_unloaded_module[MODULE_NAME_LEN+1];
 EXPORT_TRACEPOINT_SYMBOL(module_get);
 
 /* Init the unload section of the module. */
-static void module_unload_init(struct module *mod)
+static int module_unload_init(struct module *mod)
 {
-	int cpu;
+	mod->refptr = alloc_percpu(struct module_ref);
+	if (!mod->refptr)
+		return -ENOMEM;
 
 	INIT_LIST_HEAD(&mod->source_list);
 	INIT_LIST_HEAD(&mod->target_list);
-	for_each_possible_cpu(cpu) {
-		per_cpu_ptr(mod->refptr, cpu)->incs = 0;
-		per_cpu_ptr(mod->refptr, cpu)->decs = 0;
-	}
 
 	/* Hold reference count during initialization. */
 	__this_cpu_write(mod->refptr->incs, 1);
 	/* Backwards compatibility macros put refcount during init. */
 	mod->waiter = current;
+
+	return 0;
 }
 
 /* Does a already use b? */
@@ -618,6 +625,8 @@ static void module_unload_free(struct module *mod)
 		kfree(use);
 	}
 	mutex_unlock(&module_mutex);
+
+	free_percpu(mod->refptr);
 }
 
 #ifdef CONFIG_MODULE_FORCE_UNLOAD
@@ -891,8 +900,9 @@ int ref_module(struct module *a, struct module *b)
 }
 EXPORT_SYMBOL_GPL(ref_module);
 
-static inline void module_unload_init(struct module *mod)
+static inline int module_unload_init(struct module *mod)
 {
+	return 0;
 }
 #endif /* CONFIG_MODULE_UNLOAD */
 
@@ -1051,10 +1061,9 @@ static inline int same_magic(const char *amagic, const char *bmagic,
 #endif /* CONFIG_MODVERSIONS */
 
 /* Resolve a symbol for this module.  I.e. if we find one, record usage. */
-static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
-						  unsigned int versindex,
+static const struct kernel_symbol *resolve_symbol(struct module *mod,
+						  const struct load_info *info,
 						  const char *name,
-						  struct module *mod,
 						  char ownername[])
 {
 	struct module *owner;
@@ -1068,7 +1077,8 @@ static const struct kernel_symbol *resolve_symbol(Elf_Shdr *sechdrs,
 	if (!sym)
 		goto unlock;
 
-	if (!check_version(sechdrs, versindex, name, mod, crc, owner)) {
+	if (!check_version(info->sechdrs, info->index.vers, name, mod, crc,
+			   owner)) {
 		sym = ERR_PTR(-EINVAL);
 		goto getname;
 	}
@@ -1087,21 +1097,20 @@ unlock:
 	return sym;
 }
 
-static const struct kernel_symbol *resolve_symbol_wait(Elf_Shdr *sechdrs,
-						       unsigned int versindex,
-						       const char *name,
-						       struct module *mod)
+static const struct kernel_symbol *
+resolve_symbol_wait(struct module *mod,
+		    const struct load_info *info,
+		    const char *name)
 {
 	const struct kernel_symbol *ksym;
-	char ownername[MODULE_NAME_LEN];
+	char owner[MODULE_NAME_LEN];
 
 	if (wait_event_interruptible_timeout(module_wq,
-			!IS_ERR(ksym = resolve_symbol(sechdrs, versindex, name,
-						      mod, ownername)) ||
-			PTR_ERR(ksym) != -EBUSY,
+			!IS_ERR(ksym = resolve_symbol(mod, info, name, owner))
+			|| PTR_ERR(ksym) != -EBUSY,
 					     30 * HZ) <= 0) {
 		printk(KERN_WARNING "%s: gave up waiting for init of module %s.\n",
-		       mod->name, ownername);
+		       mod->name, owner);
 	}
 	return ksym;
 }
@@ -1110,8 +1119,9 @@ static const struct kernel_symbol *resolve_symbol_wait(Elf_Shdr *sechdrs,
  * /sys/module/foo/sections stuff
  * J. Corbet <corbet@lwn.net>
  */
-#if defined(CONFIG_KALLSYMS) && defined(CONFIG_SYSFS)
+#ifdef CONFIG_SYSFS
 
+#ifdef CONFIG_KALLSYMS
 static inline bool sect_empty(const Elf_Shdr *sect)
 {
 	return !(sect->sh_flags & SHF_ALLOC) || sect->sh_size == 0;
@@ -1148,8 +1158,7 @@ static void free_sect_attrs(struct module_sect_attrs *sect_attrs)
 	kfree(sect_attrs);
 }
 
-static void add_sect_attrs(struct module *mod, unsigned int nsect,
-		char *secstrings, Elf_Shdr *sechdrs)
+static void add_sect_attrs(struct module *mod, const struct load_info *info)
 {
 	unsigned int nloaded = 0, i, size[2];
 	struct module_sect_attrs *sect_attrs;
@@ -1157,8 +1166,8 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect,
 	struct attribute **gattr;
 
 	/* Count loaded sections and allocate structures */
-	for (i = 0; i < nsect; i++)
-		if (!sect_empty(&sechdrs[i]))
+	for (i = 0; i < info->hdr->e_shnum; i++)
+		if (!sect_empty(&info->sechdrs[i]))
 			nloaded++;
 	size[0] = ALIGN(sizeof(*sect_attrs)
 			+ nloaded * sizeof(sect_attrs->attrs[0]),
@@ -1175,11 +1184,12 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect,
 	sect_attrs->nsections = 0;
 	sattr = &sect_attrs->attrs[0];
 	gattr = &sect_attrs->grp.attrs[0];
-	for (i = 0; i < nsect; i++) {
-		if (sect_empty(&sechdrs[i]))
+	for (i = 0; i < info->hdr->e_shnum; i++) {
+		Elf_Shdr *sec = &info->sechdrs[i];
+		if (sect_empty(sec))
 			continue;
-		sattr->address = sechdrs[i].sh_addr;
-		sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
+		sattr->address = sec->sh_addr;
+		sattr->name = kstrdup(info->secstrings + sec->sh_name,
 					GFP_KERNEL);
 		if (sattr->name == NULL)
 			goto out;
@@ -1247,8 +1257,7 @@ static void free_notes_attrs(struct module_notes_attrs *notes_attrs,
 	kfree(notes_attrs);
 }
 
-static void add_notes_attrs(struct module *mod, unsigned int nsect,
-			    char *secstrings, Elf_Shdr *sechdrs)
+static void add_notes_attrs(struct module *mod, const struct load_info *info)
 {
 	unsigned int notes, loaded, i;
 	struct module_notes_attrs *notes_attrs;
@@ -1260,9 +1269,9 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
 
 	/* Count notes sections and allocate structures.  */
 	notes = 0;
-	for (i = 0; i < nsect; i++)
-		if (!sect_empty(&sechdrs[i]) &&
-		    (sechdrs[i].sh_type == SHT_NOTE))
+	for (i = 0; i < info->hdr->e_shnum; i++)
+		if (!sect_empty(&info->sechdrs[i]) &&
+		    (info->sechdrs[i].sh_type == SHT_NOTE))
 			++notes;
 
 	if (notes == 0)
@@ -1276,15 +1285,15 @@ static void add_notes_attrs(struct module *mod, unsigned int nsect,
 
 	notes_attrs->notes = notes;
 	nattr = &notes_attrs->attrs[0];
-	for (loaded = i = 0; i < nsect; ++i) {
-		if (sect_empty(&sechdrs[i]))
+	for (loaded = i = 0; i < info->hdr->e_shnum; ++i) {
+		if (sect_empty(&info->sechdrs[i]))
 			continue;
-		if (sechdrs[i].sh_type == SHT_NOTE) {
+		if (info->sechdrs[i].sh_type == SHT_NOTE) {
 			sysfs_bin_attr_init(nattr);
 			nattr->attr.name = mod->sect_attrs->attrs[loaded].name;
 			nattr->attr.mode = S_IRUGO;
-			nattr->size = sechdrs[i].sh_size;
-			nattr->private = (void *) sechdrs[i].sh_addr;
+			nattr->size = info->sechdrs[i].sh_size;
+			nattr->private = (void *) info->sechdrs[i].sh_addr;
 			nattr->read = module_notes_read;
 			++nattr;
 		}
@@ -1315,8 +1324,8 @@ static void remove_notes_attrs(struct module *mod)
 
 #else
 
-static inline void add_sect_attrs(struct module *mod, unsigned int nsect,
-		char *sectstrings, Elf_Shdr *sechdrs)
+static inline void add_sect_attrs(struct module *mod,
+				  const struct load_info *info)
 {
 }
 
@@ -1324,17 +1333,16 @@ static inline void remove_sect_attrs(struct module *mod)
 {
 }
 
-static inline void add_notes_attrs(struct module *mod, unsigned int nsect,
-				   char *sectstrings, Elf_Shdr *sechdrs)
+static inline void add_notes_attrs(struct module *mod,
+				   const struct load_info *info)
 {
 }
 
 static inline void remove_notes_attrs(struct module *mod)
 {
 }
-#endif
+#endif /* CONFIG_KALLSYMS */
 
-#ifdef CONFIG_SYSFS
 static void add_usage_links(struct module *mod)
 {
 #ifdef CONFIG_MODULE_UNLOAD
@@ -1439,6 +1447,7 @@ out:
 }
 
 static int mod_sysfs_setup(struct module *mod,
+			   const struct load_info *info,
 			   struct kernel_param *kparam,
 			   unsigned int num_params)
 {
@@ -1463,6 +1472,8 @@ static int mod_sysfs_setup(struct module *mod,
 		goto out_unreg_param;
 
 	add_usage_links(mod);
+	add_sect_attrs(mod, info);
+	add_notes_attrs(mod, info);
 
 	kobject_uevent(&mod->mkobj.kobj, KOBJ_ADD);
 	return 0;
@@ -1479,33 +1490,26 @@ out:
 
 static void mod_sysfs_fini(struct module *mod)
 {
+	remove_notes_attrs(mod);
+	remove_sect_attrs(mod);
 	kobject_put(&mod->mkobj.kobj);
 }
 
-#else /* CONFIG_SYSFS */
-
-static inline int mod_sysfs_init(struct module *mod)
-{
-	return 0;
-}
+#else /* !CONFIG_SYSFS */
 
-static inline int mod_sysfs_setup(struct module *mod,
+static int mod_sysfs_setup(struct module *mod,
+			   const struct load_info *info,
 			   struct kernel_param *kparam,
 			   unsigned int num_params)
 {
 	return 0;
 }
 
-static inline int module_add_modinfo_attrs(struct module *mod)
-{
-	return 0;
-}
-
-static inline void module_remove_modinfo_attrs(struct module *mod)
+static void mod_sysfs_fini(struct module *mod)
 {
 }
 
-static void mod_sysfs_fini(struct module *mod)
+static void module_remove_modinfo_attrs(struct module *mod)
 {
 }
 
@@ -1515,7 +1519,7 @@ static void del_usage_links(struct module *mod)
 
 #endif /* CONFIG_SYSFS */
 
-static void mod_kobject_remove(struct module *mod)
+static void mod_sysfs_teardown(struct module *mod)
 {
 	del_usage_links(mod);
 	module_remove_modinfo_attrs(mod);
@@ -1545,9 +1549,7 @@ static void free_module(struct module *mod)
 	mutex_lock(&module_mutex);
 	stop_machine(__unlink_module, mod, NULL);
 	mutex_unlock(&module_mutex);
-	remove_notes_attrs(mod);
-	remove_sect_attrs(mod);
-	mod_kobject_remove(mod);
+	mod_sysfs_teardown(mod);
 
 	/* Remove dynamic debug info */
 	ddebug_remove_module(mod->name);
@@ -1565,10 +1567,7 @@ static void free_module(struct module *mod)
 	module_free(mod, mod->module_init);
 	kfree(mod->args);
 	percpu_modfree(mod);
-#if defined(CONFIG_MODULE_UNLOAD)
-	if (mod->refptr)
-		free_percpu(mod->refptr);
-#endif
+
 	/* Free lock-classes: */
 	lockdep_free_key_range(mod->module_core, mod->core_size);
 
@@ -1634,25 +1633,23 @@ static int verify_export_symbols(struct module *mod)
 }
 
 /* Change all symbols so that st_value encodes the pointer directly. */
-static int simplify_symbols(Elf_Shdr *sechdrs,
-			    unsigned int symindex,
-			    const char *strtab,
-			    unsigned int versindex,
-			    unsigned int pcpuindex,
-			    struct module *mod)
-{
-	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
+static int simplify_symbols(struct module *mod, const struct load_info *info)
+{
+	Elf_Shdr *symsec = &info->sechdrs[info->index.sym];
+	Elf_Sym *sym = (void *)symsec->sh_addr;
 	unsigned long secbase;
-	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
+	unsigned int i;
 	int ret = 0;
 	const struct kernel_symbol *ksym;
 
-	for (i = 1; i < n; i++) {
+	for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
+		const char *name = info->strtab + sym[i].st_name;
+
 		switch (sym[i].st_shndx) {
 		case SHN_COMMON:
 			/* We compiled with -fno-common.  These are not
 			   supposed to happen.  */
-			DEBUGP("Common symbol: %s\n", strtab + sym[i].st_name);
+			DEBUGP("Common symbol: %s\n", name);
 			printk("%s: please compile with -fno-common\n",
 			       mod->name);
 			ret = -ENOEXEC;
@@ -1665,9 +1662,7 @@ static int simplify_symbols(Elf_Shdr *sechdrs,
 			break;
 
 		case SHN_UNDEF:
-			ksym = resolve_symbol_wait(sechdrs, versindex,
-						   strtab + sym[i].st_name,
-						   mod);
+			ksym = resolve_symbol_wait(mod, info, name);
 			/* Ok if resolved.  */
 			if (ksym && !IS_ERR(ksym)) {
 				sym[i].st_value = ksym->value;
@@ -1679,17 +1674,16 @@ static int simplify_symbols(Elf_Shdr *sechdrs,
 				break;
 
 			printk(KERN_WARNING "%s: Unknown symbol %s (err %li)\n",
-			       mod->name, strtab + sym[i].st_name,
-			       PTR_ERR(ksym));
+			       mod->name, name, PTR_ERR(ksym));
 			ret = PTR_ERR(ksym) ?: -ENOENT;
 			break;
 
 		default:
 			/* Divert to percpu allocation if a percpu var. */
-			if (sym[i].st_shndx == pcpuindex)
+			if (sym[i].st_shndx == info->index.pcpu)
 				secbase = (unsigned long)mod_percpu(mod);
 			else
-				secbase = sechdrs[sym[i].st_shndx].sh_addr;
+				secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
 			sym[i].st_value += secbase;
 			break;
 		}
@@ -1698,6 +1692,35 @@ static int simplify_symbols(Elf_Shdr *sechdrs,
 	return ret;
 }
 
+static int apply_relocations(struct module *mod, const struct load_info *info)
+{
+	unsigned int i;
+	int err = 0;
+
+	/* Now do relocations. */
+	for (i = 1; i < info->hdr->e_shnum; i++) {
+		unsigned int infosec = info->sechdrs[i].sh_info;
+
+		/* Not a valid relocation section? */
+		if (infosec >= info->hdr->e_shnum)
+			continue;
+
+		/* Don't bother with non-allocated sections */
+		if (!(info->sechdrs[infosec].sh_flags & SHF_ALLOC))
+			continue;
+
+		if (info->sechdrs[i].sh_type == SHT_REL)
+			err = apply_relocate(info->sechdrs, info->strtab,
+					     info->index.sym, i, mod);
+		else if (info->sechdrs[i].sh_type == SHT_RELA)
+			err = apply_relocate_add(info->sechdrs, info->strtab,
+						 info->index.sym, i, mod);
+		if (err < 0)
+			break;
+	}
+	return err;
+}
+
 /* Additional bytes needed by arch in front of individual sections */
 unsigned int __weak arch_mod_section_prepend(struct module *mod,
 					     unsigned int section)
@@ -1722,10 +1745,7 @@ static long get_offset(struct module *mod, unsigned int *size,
    might -- code, read-only data, read-write data, small data.  Tally
    sizes, and place the offsets into sh_entsize fields: high bit means it
    belongs in init. */
-static void layout_sections(struct module *mod,
-			    const Elf_Ehdr *hdr,
-			    Elf_Shdr *sechdrs,
-			    const char *secstrings)
+static void layout_sections(struct module *mod, struct load_info *info)
 {
 	static unsigned long const masks[][2] = {
 		/* NOTE: all executable code must be the first section
@@ -1738,21 +1758,22 @@ static void layout_sections(struct module *mod,
 	};
 	unsigned int m, i;
 
-	for (i = 0; i < hdr->e_shnum; i++)
-		sechdrs[i].sh_entsize = ~0UL;
+	for (i = 0; i < info->hdr->e_shnum; i++)
+		info->sechdrs[i].sh_entsize = ~0UL;
 
 	DEBUGP("Core section allocation order:\n");
 	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
-		for (i = 0; i < hdr->e_shnum; ++i) {
-			Elf_Shdr *s = &sechdrs[i];
+		for (i = 0; i < info->hdr->e_shnum; ++i) {
+			Elf_Shdr *s = &info->sechdrs[i];
+			const char *sname = info->secstrings + s->sh_name;
 
 			if ((s->sh_flags & masks[m][0]) != masks[m][0]
 			    || (s->sh_flags & masks[m][1])
 			    || s->sh_entsize != ~0UL
-			    || strstarts(secstrings + s->sh_name, ".init"))
+			    || strstarts(sname, ".init"))
 				continue;
 			s->sh_entsize = get_offset(mod, &mod->core_size, s, i);
-			DEBUGP("\t%s\n", secstrings + s->sh_name);
+			DEBUGP("\t%s\n", name);
 		}
 		if (m == 0)
 			mod->core_text_size = mod->core_size;
@@ -1760,17 +1781,18 @@ static void layout_sections(struct module *mod,
 
 	DEBUGP("Init section allocation order:\n");
 	for (m = 0; m < ARRAY_SIZE(masks); ++m) {
-		for (i = 0; i < hdr->e_shnum; ++i) {
-			Elf_Shdr *s = &sechdrs[i];
+		for (i = 0; i < info->hdr->e_shnum; ++i) {
+			Elf_Shdr *s = &info->sechdrs[i];
+			const char *sname = info->secstrings + s->sh_name;
 
 			if ((s->sh_flags & masks[m][0]) != masks[m][0]
 			    || (s->sh_flags & masks[m][1])
 			    || s->sh_entsize != ~0UL
-			    || !strstarts(secstrings + s->sh_name, ".init"))
+			    || !strstarts(sname, ".init"))
 				continue;
 			s->sh_entsize = (get_offset(mod, &mod->init_size, s, i)
 					 | INIT_OFFSET_MASK);
-			DEBUGP("\t%s\n", secstrings + s->sh_name);
+			DEBUGP("\t%s\n", sname);
 		}
 		if (m == 0)
 			mod->init_text_size = mod->init_size;
@@ -1809,33 +1831,28 @@ static char *next_string(char *string, unsigned long *secsize)
 	return string;
 }
 
-static char *get_modinfo(Elf_Shdr *sechdrs,
-			 unsigned int info,
-			 const char *tag)
+static char *get_modinfo(struct load_info *info, const char *tag)
 {
 	char *p;
 	unsigned int taglen = strlen(tag);
-	unsigned long size = sechdrs[info].sh_size;
+	Elf_Shdr *infosec = &info->sechdrs[info->index.info];
+	unsigned long size = infosec->sh_size;
 
-	for (p = (char *)sechdrs[info].sh_addr; p; p = next_string(p, &size)) {
+	for (p = (char *)infosec->sh_addr; p; p = next_string(p, &size)) {
 		if (strncmp(p, tag, taglen) == 0 && p[taglen] == '=')
 			return p + taglen + 1;
 	}
 	return NULL;
 }
 
-static void setup_modinfo(struct module *mod, Elf_Shdr *sechdrs,
-			  unsigned int infoindex)
+static void setup_modinfo(struct module *mod, struct load_info *info)
 {
 	struct module_attribute *attr;
 	int i;
 
 	for (i = 0; (attr = modinfo_attrs[i]); i++) {
 		if (attr->setup)
-			attr->setup(mod,
-				    get_modinfo(sechdrs,
-						infoindex,
-						attr->attr.name));
+			attr->setup(mod, get_modinfo(info, attr->attr.name));
 	}
 }
 
@@ -1876,11 +1893,10 @@ static int is_exported(const char *name, unsigned long value,
 }
 
 /* As per nm */
-static char elf_type(const Elf_Sym *sym,
-		     Elf_Shdr *sechdrs,
-		     const char *secstrings,
-		     struct module *mod)
+static char elf_type(const Elf_Sym *sym, const struct load_info *info)
 {
+	const Elf_Shdr *sechdrs = info->sechdrs;
+
 	if (ELF_ST_BIND(sym->st_info) == STB_WEAK) {
 		if (ELF_ST_TYPE(sym->st_info) == STT_OBJECT)
 			return 'v';
@@ -1910,8 +1926,10 @@ static char elf_type(const Elf_Sym *sym,
 		else
 			return 'b';
 	}
-	if (strstarts(secstrings + sechdrs[sym->st_shndx].sh_name, ".debug"))
+	if (strstarts(info->secstrings + sechdrs[sym->st_shndx].sh_name,
+		      ".debug")) {
 		return 'n';
+	}
 	return '?';
 }
 
@@ -1936,127 +1954,96 @@ static bool is_core_symbol(const Elf_Sym *src, const Elf_Shdr *sechdrs,
 	return true;
 }
 
-static unsigned long layout_symtab(struct module *mod,
-				   Elf_Shdr *sechdrs,
-				   unsigned int symindex,
-				   unsigned int strindex,
-				   const Elf_Ehdr *hdr,
-				   const char *secstrings,
-				   unsigned long *pstroffs,
-				   unsigned long *strmap)
+static void layout_symtab(struct module *mod, struct load_info *info)
 {
-	unsigned long symoffs;
-	Elf_Shdr *symsect = sechdrs + symindex;
-	Elf_Shdr *strsect = sechdrs + strindex;
+	Elf_Shdr *symsect = info->sechdrs + info->index.sym;
+	Elf_Shdr *strsect = info->sechdrs + info->index.str;
 	const Elf_Sym *src;
-	const char *strtab;
 	unsigned int i, nsrc, ndst;
 
 	/* Put symbol section at end of init part of module. */
 	symsect->sh_flags |= SHF_ALLOC;
 	symsect->sh_entsize = get_offset(mod, &mod->init_size, symsect,
-					 symindex) | INIT_OFFSET_MASK;
-	DEBUGP("\t%s\n", secstrings + symsect->sh_name);
+					 info->index.sym) | INIT_OFFSET_MASK;
+	DEBUGP("\t%s\n", info->secstrings + symsect->sh_name);
 
-	src = (void *)hdr + symsect->sh_offset;
+	src = (void *)info->hdr + symsect->sh_offset;
 	nsrc = symsect->sh_size / sizeof(*src);
-	strtab = (void *)hdr + strsect->sh_offset;
 	for (ndst = i = 1; i < nsrc; ++i, ++src)
-		if (is_core_symbol(src, sechdrs, hdr->e_shnum)) {
+		if (is_core_symbol(src, info->sechdrs, info->hdr->e_shnum)) {
 			unsigned int j = src->st_name;
 
-			while(!__test_and_set_bit(j, strmap) && strtab[j])
+			while (!__test_and_set_bit(j, info->strmap)
+			       && info->strtab[j])
 				++j;
 			++ndst;
 		}
 
 	/* Append room for core symbols at end of core part. */
-	symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
-	mod->core_size = symoffs + ndst * sizeof(Elf_Sym);
+	info->symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
+	mod->core_size = info->symoffs + ndst * sizeof(Elf_Sym);
 
 	/* Put string table section at end of init part of module. */
 	strsect->sh_flags |= SHF_ALLOC;
 	strsect->sh_entsize = get_offset(mod, &mod->init_size, strsect,
-					 strindex) | INIT_OFFSET_MASK;
-	DEBUGP("\t%s\n", secstrings + strsect->sh_name);
+					 info->index.str) | INIT_OFFSET_MASK;
+	DEBUGP("\t%s\n", info->secstrings + strsect->sh_name);
 
 	/* Append room for core symbols' strings at end of core part. */
-	*pstroffs = mod->core_size;
-	__set_bit(0, strmap);
-	mod->core_size += bitmap_weight(strmap, strsect->sh_size);
-
-	return symoffs;
+	info->stroffs = mod->core_size;
+	__set_bit(0, info->strmap);
+	mod->core_size += bitmap_weight(info->strmap, strsect->sh_size);
 }
 
-static void add_kallsyms(struct module *mod,
-			 Elf_Shdr *sechdrs,
-			 unsigned int shnum,
-			 unsigned int symindex,
-			 unsigned int strindex,
-			 unsigned long symoffs,
-			 unsigned long stroffs,
-			 const char *secstrings,
-			 unsigned long *strmap)
+static void add_kallsyms(struct module *mod, const struct load_info *info)
 {
 	unsigned int i, ndst;
 	const Elf_Sym *src;
 	Elf_Sym *dst;
 	char *s;
+	Elf_Shdr *symsec = &info->sechdrs[info->index.sym];
 
-	mod->symtab = (void *)sechdrs[symindex].sh_addr;
-	mod->num_symtab = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
-	mod->strtab = (void *)sechdrs[strindex].sh_addr;
+	mod->symtab = (void *)symsec->sh_addr;
+	mod->num_symtab = symsec->sh_size / sizeof(Elf_Sym);
+	/* Make sure we get permanent strtab: don't use info->strtab. */
+	mod->strtab = (void *)info->sechdrs[info->index.str].sh_addr;
 
 	/* Set types up while we still have access to sections. */
 	for (i = 0; i < mod->num_symtab; i++)
-		mod->symtab[i].st_info
-			= elf_type(&mod->symtab[i], sechdrs, secstrings, mod);
+		mod->symtab[i].st_info = elf_type(&mod->symtab[i], info);
 
-	mod->core_symtab = dst = mod->module_core + symoffs;
+	mod->core_symtab = dst = mod->module_core + info->symoffs;
 	src = mod->symtab;
 	*dst = *src;
 	for (ndst = i = 1; i < mod->num_symtab; ++i, ++src) {
-		if (!is_core_symbol(src, sechdrs, shnum))
+		if (!is_core_symbol(src, info->sechdrs, info->hdr->e_shnum))
 			continue;
 		dst[ndst] = *src;
-		dst[ndst].st_name = bitmap_weight(strmap, dst[ndst].st_name);
+		dst[ndst].st_name = bitmap_weight(info->strmap,
+						  dst[ndst].st_name);
 		++ndst;
 	}
 	mod->core_num_syms = ndst;
 
-	mod->core_strtab = s = mod->module_core + stroffs;
-	for (*s = 0, i = 1; i < sechdrs[strindex].sh_size; ++i)
-		if (test_bit(i, strmap))
+	mod->core_strtab = s = mod->module_core + info->stroffs;
+	for (*s = 0, i = 1; i < info->sechdrs[info->index.str].sh_size; ++i)
+		if (test_bit(i, info->strmap))
 			*++s = mod->strtab[i];
 }
 #else
-static inline unsigned long layout_symtab(struct module *mod,
-					  Elf_Shdr *sechdrs,
-					  unsigned int symindex,
-					  unsigned int strindex,
-					  const Elf_Ehdr *hdr,
-					  const char *secstrings,
-					  unsigned long *pstroffs,
-					  unsigned long *strmap)
+static inline void layout_symtab(struct module *mod, struct load_info *info)
 {
-	return 0;
 }
 
-static inline void add_kallsyms(struct module *mod,
-				Elf_Shdr *sechdrs,
-				unsigned int shnum,
-				unsigned int symindex,
-				unsigned int strindex,
-				unsigned long symoffs,
-				unsigned long stroffs,
-				const char *secstrings,
-				const unsigned long *strmap)
+static void add_kallsyms(struct module *mod, struct load_info *info)
 {
 }
 #endif /* CONFIG_KALLSYMS */
 
 static void dynamic_debug_setup(struct _ddebug *debug, unsigned int num)
 {
+	if (!debug)
+		return;
 #ifdef CONFIG_DYNAMIC_DEBUG
 	if (ddebug_add_module(debug, num, debug->modname))
 		printk(KERN_ERR "dynamic debug error adding module: %s\n",
@@ -2087,65 +2074,47 @@ static void *module_alloc_update_bounds(unsigned long size)
 }
 
 #ifdef CONFIG_DEBUG_KMEMLEAK
-static void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr,
-				 Elf_Shdr *sechdrs, char *secstrings)
+static void kmemleak_load_module(const struct module *mod,
+				 const struct load_info *info)
 {
 	unsigned int i;
 
 	/* only scan the sections containing data */
 	kmemleak_scan_area(mod, sizeof(struct module), GFP_KERNEL);
 
-	for (i = 1; i < hdr->e_shnum; i++) {
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+	for (i = 1; i < info->hdr->e_shnum; i++) {
+		const char *name = info->secstrings + info->sechdrs[i].sh_name;
+		if (!(info->sechdrs[i].sh_flags & SHF_ALLOC))
 			continue;
-		if (strncmp(secstrings + sechdrs[i].sh_name, ".data", 5) != 0
-		    && strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) != 0)
+		if (!strstarts(name, ".data") && !strstarts(name, ".bss"))
 			continue;
 
-		kmemleak_scan_area((void *)sechdrs[i].sh_addr,
-				   sechdrs[i].sh_size, GFP_KERNEL);
+		kmemleak_scan_area((void *)info->sechdrs[i].sh_addr,
+				   info->sechdrs[i].sh_size, GFP_KERNEL);
 	}
 }
 #else
-static inline void kmemleak_load_module(struct module *mod, Elf_Ehdr *hdr,
-					Elf_Shdr *sechdrs, char *secstrings)
+static inline void kmemleak_load_module(const struct module *mod,
+					const struct load_info *info)
 {
 }
 #endif
 
-/* Allocate and load the module: note that size of section 0 is always
-   zero, and we rely on this for optional sections. */
-static noinline struct module *load_module(void __user *umod,
-				  unsigned long len,
-				  const char __user *uargs)
+/* Sets info->hdr and info->len. */
+static int copy_and_check(struct load_info *info,
+			  const void __user *umod, unsigned long len,
+			  const char __user *uargs)
 {
+	int err;
 	Elf_Ehdr *hdr;
-	Elf_Shdr *sechdrs;
-	char *secstrings, *args, *modmagic, *strtab = NULL;
-	char *staging;
-	unsigned int i;
-	unsigned int symindex = 0;
-	unsigned int strindex = 0;
-	unsigned int modindex, versindex, infoindex, pcpuindex;
-	struct module *mod;
-	long err = 0;
-	void *ptr = NULL; /* Stops spurious gcc warning */
-	unsigned long symoffs, stroffs, *strmap;
-	void __percpu *percpu;
-	struct _ddebug *debug = NULL;
-	unsigned int num_debug = 0;
 
-	mm_segment_t old_fs;
-
-	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
-	       umod, len, uargs);
 	if (len < sizeof(*hdr))
-		return ERR_PTR(-ENOEXEC);
+		return -ENOEXEC;
 
 	/* Suck in entire file: we'll want most of it. */
 	/* vmalloc barfs on "unusual" numbers.  Check here */
 	if (len > 64 * 1024 * 1024 || (hdr = vmalloc(len)) == NULL)
-		return ERR_PTR(-ENOMEM);
+		return -ENOMEM;
 
 	if (copy_from_user(hdr, umod, len) != 0) {
 		err = -EFAULT;
@@ -2153,135 +2122,225 @@ static noinline struct module *load_module(void __user *umod,
 	}
 
 	/* Sanity checks against insmoding binaries or wrong arch,
-           weird elf version */
+	   weird elf version */
 	if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
 	    || hdr->e_type != ET_REL
 	    || !elf_check_arch(hdr)
-	    || hdr->e_shentsize != sizeof(*sechdrs)) {
+	    || hdr->e_shentsize != sizeof(Elf_Shdr)) {
 		err = -ENOEXEC;
 		goto free_hdr;
 	}
 
-	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr))
-		goto truncated;
+	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
+		err = -ENOEXEC;
+		goto free_hdr;
+	}
 
-	/* Convenience variables */
-	sechdrs = (void *)hdr + hdr->e_shoff;
-	secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	sechdrs[0].sh_addr = 0;
+	info->hdr = hdr;
+	info->len = len;
+	return 0;
 
-	for (i = 1; i < hdr->e_shnum; i++) {
-		if (sechdrs[i].sh_type != SHT_NOBITS
-		    && len < sechdrs[i].sh_offset + sechdrs[i].sh_size)
-			goto truncated;
+free_hdr:
+	vfree(hdr);
+	return err;
+}
+
+static void free_copy(struct load_info *info)
+{
+	vfree(info->hdr);
+}
+
+static int rewrite_section_headers(struct load_info *info)
+{
+	unsigned int i;
+
+	/* This should always be true, but let's be sure. */
+	info->sechdrs[0].sh_addr = 0;
+
+	for (i = 1; i < info->hdr->e_shnum; i++) {
+		Elf_Shdr *shdr = &info->sechdrs[i];
+		if (shdr->sh_type != SHT_NOBITS
+		    && info->len < shdr->sh_offset + shdr->sh_size) {
+			printk(KERN_ERR "Module len %lu truncated\n",
+			       info->len);
+			return -ENOEXEC;
+		}
 
 		/* Mark all sections sh_addr with their address in the
 		   temporary image. */
-		sechdrs[i].sh_addr = (size_t)hdr + sechdrs[i].sh_offset;
+		shdr->sh_addr = (size_t)info->hdr + shdr->sh_offset;
 
-		/* Internal symbols and strings. */
-		if (sechdrs[i].sh_type == SHT_SYMTAB) {
-			symindex = i;
-			strindex = sechdrs[i].sh_link;
-			strtab = (char *)hdr + sechdrs[strindex].sh_offset;
-		}
 #ifndef CONFIG_MODULE_UNLOAD
 		/* Don't load .exit sections */
-		if (strstarts(secstrings+sechdrs[i].sh_name, ".exit"))
-			sechdrs[i].sh_flags &= ~(unsigned long)SHF_ALLOC;
+		if (strstarts(info->secstrings+shdr->sh_name, ".exit"))
+			shdr->sh_flags &= ~(unsigned long)SHF_ALLOC;
 #endif
 	}
 
-	modindex = find_sec(hdr, sechdrs, secstrings,
-			    ".gnu.linkonce.this_module");
-	if (!modindex) {
+	/* Track but don't keep modinfo and version sections. */
+	info->index.vers = find_sec(info, "__versions");
+	info->index.info = find_sec(info, ".modinfo");
+	info->sechdrs[info->index.info].sh_flags &= ~(unsigned long)SHF_ALLOC;
+	info->sechdrs[info->index.vers].sh_flags &= ~(unsigned long)SHF_ALLOC;
+	return 0;
+}
+
+/*
+ * Set up our basic convenience variables (pointers to section headers,
+ * search for module section index etc), and do some basic section
+ * verification.
+ *
+ * Return the temporary module pointer (we'll replace it with the final
+ * one when we move the module sections around).
+ */
+static struct module *setup_load_info(struct load_info *info)
+{
+	unsigned int i;
+	int err;
+	struct module *mod;
+
+	/* Set up the convenience variables */
+	info->sechdrs = (void *)info->hdr + info->hdr->e_shoff;
+	info->secstrings = (void *)info->hdr
+		+ info->sechdrs[info->hdr->e_shstrndx].sh_offset;
+
+	err = rewrite_section_headers(info);
+	if (err)
+		return ERR_PTR(err);
+
+	/* Find internal symbols and strings. */
+	for (i = 1; i < info->hdr->e_shnum; i++) {
+		if (info->sechdrs[i].sh_type == SHT_SYMTAB) {
+			info->index.sym = i;
+			info->index.str = info->sechdrs[i].sh_link;
+			info->strtab = (char *)info->hdr
+				+ info->sechdrs[info->index.str].sh_offset;
+			break;
+		}
+	}
+
+	info->index.mod = find_sec(info, ".gnu.linkonce.this_module");
+	if (!info->index.mod) {
 		printk(KERN_WARNING "No module found in object\n");
-		err = -ENOEXEC;
-		goto free_hdr;
+		return ERR_PTR(-ENOEXEC);
 	}
 	/* This is temporary: point mod into copy of data. */
-	mod = (void *)sechdrs[modindex].sh_addr;
+	mod = (void *)info->sechdrs[info->index.mod].sh_addr;
 
-	if (symindex == 0) {
+	if (info->index.sym == 0) {
 		printk(KERN_WARNING "%s: module has no symbols (stripped?)\n",
 		       mod->name);
-		err = -ENOEXEC;
-		goto free_hdr;
+		return ERR_PTR(-ENOEXEC);
 	}
 
-	versindex = find_sec(hdr, sechdrs, secstrings, "__versions");
-	infoindex = find_sec(hdr, sechdrs, secstrings, ".modinfo");
-	pcpuindex = find_pcpusec(hdr, sechdrs, secstrings);
-
-	/* Don't keep modinfo and version sections. */
-	sechdrs[infoindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
-	sechdrs[versindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
+	info->index.pcpu = find_pcpusec(info);
 
 	/* Check module struct version now, before we try to use module. */
-	if (!check_modstruct_version(sechdrs, versindex, mod)) {
-		err = -ENOEXEC;
-		goto free_hdr;
-	}
+	if (!check_modstruct_version(info->sechdrs, info->index.vers, mod))
+		return ERR_PTR(-ENOEXEC);
+
+	return mod;
+}
+
+static int check_modinfo(struct module *mod, struct load_info *info)
+{
+	const char *modmagic = get_modinfo(info, "vermagic");
+	int err;
 
-	modmagic = get_modinfo(sechdrs, infoindex, "vermagic");
 	/* This is allowed: modprobe --force will invalidate it. */
 	if (!modmagic) {
 		err = try_to_force_load(mod, "bad vermagic");
 		if (err)
-			goto free_hdr;
-	} else if (!same_magic(modmagic, vermagic, versindex)) {
+			return err;
+	} else if (!same_magic(modmagic, vermagic, info->index.vers)) {
 		printk(KERN_ERR "%s: version magic '%s' should be '%s'\n",
 		       mod->name, modmagic, vermagic);
-		err = -ENOEXEC;
-		goto free_hdr;
+		return -ENOEXEC;
 	}
 
-	staging = get_modinfo(sechdrs, infoindex, "staging");
-	if (staging) {
+	if (get_modinfo(info, "staging")) {
 		add_taint_module(mod, TAINT_CRAP);
 		printk(KERN_WARNING "%s: module is from the staging directory,"
 		       " the quality is unknown, you have been warned.\n",
 		       mod->name);
 	}
 
-	/* Now copy in args */
-	args = strndup_user(uargs, ~0UL >> 1);
-	if (IS_ERR(args)) {
-		err = PTR_ERR(args);
-		goto free_hdr;
-	}
+	/* Set up license info based on the info section */
+	set_license(mod, get_modinfo(info, "license"));
 
-	strmap = kzalloc(BITS_TO_LONGS(sechdrs[strindex].sh_size)
-			 * sizeof(long), GFP_KERNEL);
-	if (!strmap) {
-		err = -ENOMEM;
-		goto free_mod;
-	}
+	return 0;
+}
 
-	mod->state = MODULE_STATE_COMING;
+static void find_module_sections(struct module *mod, struct load_info *info)
+{
+	mod->kp = section_objs(info, "__param",
+			       sizeof(*mod->kp), &mod->num_kp);
+	mod->syms = section_objs(info, "__ksymtab",
+				 sizeof(*mod->syms), &mod->num_syms);
+	mod->crcs = section_addr(info, "__kcrctab");
+	mod->gpl_syms = section_objs(info, "__ksymtab_gpl",
+				     sizeof(*mod->gpl_syms),
+				     &mod->num_gpl_syms);
+	mod->gpl_crcs = section_addr(info, "__kcrctab_gpl");
+	mod->gpl_future_syms = section_objs(info,
+					    "__ksymtab_gpl_future",
+					    sizeof(*mod->gpl_future_syms),
+					    &mod->num_gpl_future_syms);
+	mod->gpl_future_crcs = section_addr(info, "__kcrctab_gpl_future");
 
-	/* Allow arches to frob section contents and sizes.  */
-	err = module_frob_arch_sections(hdr, sechdrs, secstrings, mod);
-	if (err < 0)
-		goto free_mod;
+#ifdef CONFIG_UNUSED_SYMBOLS
+	mod->unused_syms = section_objs(info, "__ksymtab_unused",
+					sizeof(*mod->unused_syms),
+					&mod->num_unused_syms);
+	mod->unused_crcs = section_addr(info, "__kcrctab_unused");
+	mod->unused_gpl_syms = section_objs(info, "__ksymtab_unused_gpl",
+					    sizeof(*mod->unused_gpl_syms),
+					    &mod->num_unused_gpl_syms);
+	mod->unused_gpl_crcs = section_addr(info, "__kcrctab_unused_gpl");
+#endif
+#ifdef CONFIG_CONSTRUCTORS
+	mod->ctors = section_objs(info, ".ctors",
+				  sizeof(*mod->ctors), &mod->num_ctors);
+#endif
 
-	if (pcpuindex) {
-		/* We have a special allocation for this section. */
-		err = percpu_modalloc(mod, sechdrs[pcpuindex].sh_size,
-				      sechdrs[pcpuindex].sh_addralign);
-		if (err)
-			goto free_mod;
-		sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
-	}
-	/* Keep this around for failure path. */
-	percpu = mod_percpu(mod);
+#ifdef CONFIG_TRACEPOINTS
+	mod->tracepoints = section_objs(info, "__tracepoints",
+					sizeof(*mod->tracepoints),
+					&mod->num_tracepoints);
+#endif
+#ifdef CONFIG_EVENT_TRACING
+	mod->trace_events = section_objs(info, "_ftrace_events",
+					 sizeof(*mod->trace_events),
+					 &mod->num_trace_events);
+	/*
+	 * This section contains pointers to allocated objects in the trace
+	 * code and not scanning it leads to false positives.
+	 */
+	kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
+			   mod->num_trace_events, GFP_KERNEL);
+#endif
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+	/* sechdrs[0].sh_size is always zero */
+	mod->ftrace_callsites = section_objs(info, "__mcount_loc",
+					     sizeof(*mod->ftrace_callsites),
+					     &mod->num_ftrace_callsites);
+#endif
 
-	/* Determine total sizes, and put offsets in sh_entsize.  For now
-	   this is done generically; there doesn't appear to be any
-	   special cases for the architectures. */
-	layout_sections(mod, hdr, sechdrs, secstrings);
-	symoffs = layout_symtab(mod, sechdrs, symindex, strindex, hdr,
-				secstrings, &stroffs, strmap);
+	mod->extable = section_objs(info, "__ex_table",
+				    sizeof(*mod->extable), &mod->num_exentries);
+
+	if (section_addr(info, "__obsparm"))
+		printk(KERN_WARNING "%s: Ignoring obsolete parameters\n",
+		       mod->name);
+
+	info->debug = section_objs(info, "__verbose",
+				   sizeof(*info->debug), &info->num_debug);
+}
+
+static int move_module(struct module *mod, struct load_info *info)
+{
+	int i;
+	void *ptr;
 
 	/* Do the allocs. */
 	ptr = module_alloc_update_bounds(mod->core_size);
@@ -2291,10 +2350,9 @@ static noinline struct module *load_module(void __user *umod,
 	 * leak.
 	 */
 	kmemleak_not_leak(ptr);
-	if (!ptr) {
-		err = -ENOMEM;
-		goto free_percpu;
-	}
+	if (!ptr)
+		return -ENOMEM;
+
 	memset(ptr, 0, mod->core_size);
 	mod->module_core = ptr;
 
@@ -2307,50 +2365,40 @@ static noinline struct module *load_module(void __user *umod,
 	 */
 	kmemleak_ignore(ptr);
 	if (!ptr && mod->init_size) {
-		err = -ENOMEM;
-		goto free_core;
+		module_free(mod, mod->module_core);
+		return -ENOMEM;
 	}
 	memset(ptr, 0, mod->init_size);
 	mod->module_init = ptr;
 
 	/* Transfer each section which specifies SHF_ALLOC */
 	DEBUGP("final section addresses:\n");
-	for (i = 0; i < hdr->e_shnum; i++) {
+	for (i = 0; i < info->hdr->e_shnum; i++) {
 		void *dest;
+		Elf_Shdr *shdr = &info->sechdrs[i];
 
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+		if (!(shdr->sh_flags & SHF_ALLOC))
 			continue;
 
-		if (sechdrs[i].sh_entsize & INIT_OFFSET_MASK)
+		if (shdr->sh_entsize & INIT_OFFSET_MASK)
 			dest = mod->module_init
-				+ (sechdrs[i].sh_entsize & ~INIT_OFFSET_MASK);
+				+ (shdr->sh_entsize & ~INIT_OFFSET_MASK);
 		else
-			dest = mod->module_core + sechdrs[i].sh_entsize;
+			dest = mod->module_core + shdr->sh_entsize;
 
-		if (sechdrs[i].sh_type != SHT_NOBITS)
-			memcpy(dest, (void *)sechdrs[i].sh_addr,
-			       sechdrs[i].sh_size);
+		if (shdr->sh_type != SHT_NOBITS)
+			memcpy(dest, (void *)shdr->sh_addr, shdr->sh_size);
 		/* Update sh_addr to point to copy in image. */
-		sechdrs[i].sh_addr = (unsigned long)dest;
-		DEBUGP("\t0x%lx %s\n", sechdrs[i].sh_addr, secstrings + sechdrs[i].sh_name);
-	}
-	/* Module has been moved. */
-	mod = (void *)sechdrs[modindex].sh_addr;
-	kmemleak_load_module(mod, hdr, sechdrs, secstrings);
-
-#if defined(CONFIG_MODULE_UNLOAD)
-	mod->refptr = alloc_percpu(struct module_ref);
-	if (!mod->refptr) {
-		err = -ENOMEM;
-		goto free_init;
+		shdr->sh_addr = (unsigned long)dest;
+		DEBUGP("\t0x%lx %s\n",
+		       shdr->sh_addr, info->secstrings + shdr->sh_name);
 	}
-#endif
-	/* Now we've moved module, initialize linked lists, etc. */
-	module_unload_init(mod);
 
-	/* Set up license info based on the info section */
-	set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
+	return 0;
+}
 
+static int check_module_license_and_versions(struct module *mod)
+{
 	/*
 	 * ndiswrapper is under GPL by itself, but loads proprietary modules.
 	 * Don't use add_taint_module(), as it would prevent ndiswrapper from
@@ -2363,77 +2411,6 @@ static noinline struct module *load_module(void __user *umod,
 	if (strcmp(mod->name, "driverloader") == 0)
 		add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
 
-	/* Set up MODINFO_ATTR fields */
-	setup_modinfo(mod, sechdrs, infoindex);
-
-	/* Fix up syms, so that st_value is a pointer to location. */
-	err = simplify_symbols(sechdrs, symindex, strtab, versindex, pcpuindex,
-			       mod);
-	if (err < 0)
-		goto cleanup;
-
-	/* Now we've got everything in the final locations, we can
-	 * find optional sections. */
-	mod->kp = section_objs(hdr, sechdrs, secstrings, "__param",
-			       sizeof(*mod->kp), &mod->num_kp);
-	mod->syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab",
-				 sizeof(*mod->syms), &mod->num_syms);
-	mod->crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab");
-	mod->gpl_syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab_gpl",
-				     sizeof(*mod->gpl_syms),
-				     &mod->num_gpl_syms);
-	mod->gpl_crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab_gpl");
-	mod->gpl_future_syms = section_objs(hdr, sechdrs, secstrings,
-					    "__ksymtab_gpl_future",
-					    sizeof(*mod->gpl_future_syms),
-					    &mod->num_gpl_future_syms);
-	mod->gpl_future_crcs = section_addr(hdr, sechdrs, secstrings,
-					    "__kcrctab_gpl_future");
-
-#ifdef CONFIG_UNUSED_SYMBOLS
-	mod->unused_syms = section_objs(hdr, sechdrs, secstrings,
-					"__ksymtab_unused",
-					sizeof(*mod->unused_syms),
-					&mod->num_unused_syms);
-	mod->unused_crcs = section_addr(hdr, sechdrs, secstrings,
-					"__kcrctab_unused");
-	mod->unused_gpl_syms = section_objs(hdr, sechdrs, secstrings,
-					    "__ksymtab_unused_gpl",
-					    sizeof(*mod->unused_gpl_syms),
-					    &mod->num_unused_gpl_syms);
-	mod->unused_gpl_crcs = section_addr(hdr, sechdrs, secstrings,
-					    "__kcrctab_unused_gpl");
-#endif
-#ifdef CONFIG_CONSTRUCTORS
-	mod->ctors = section_objs(hdr, sechdrs, secstrings, ".ctors",
-				  sizeof(*mod->ctors), &mod->num_ctors);
-#endif
-
-#ifdef CONFIG_TRACEPOINTS
-	mod->tracepoints = section_objs(hdr, sechdrs, secstrings,
-					"__tracepoints",
-					sizeof(*mod->tracepoints),
-					&mod->num_tracepoints);
-#endif
-#ifdef CONFIG_EVENT_TRACING
-	mod->trace_events = section_objs(hdr, sechdrs, secstrings,
-					 "_ftrace_events",
-					 sizeof(*mod->trace_events),
-					 &mod->num_trace_events);
-	/*
-	 * This section contains pointers to allocated objects in the trace
-	 * code and not scanning it leads to false positives.
-	 */
-	kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
-			   mod->num_trace_events, GFP_KERNEL);
-#endif
-#ifdef CONFIG_FTRACE_MCOUNT_RECORD
-	/* sechdrs[0].sh_size is always zero */
-	mod->ftrace_callsites = section_objs(hdr, sechdrs, secstrings,
-					     "__mcount_loc",
-					     sizeof(*mod->ftrace_callsites),
-					     &mod->num_ftrace_callsites);
-#endif
 #ifdef CONFIG_MODVERSIONS
 	if ((mod->num_syms && !mod->crcs)
 	    || (mod->num_gpl_syms && !mod->gpl_crcs)
@@ -2443,56 +2420,16 @@ static noinline struct module *load_module(void __user *umod,
 	    || (mod->num_unused_gpl_syms && !mod->unused_gpl_crcs)
 #endif
 		) {
-		err = try_to_force_load(mod,
-					"no versions for exported symbols");
-		if (err)
-			goto cleanup;
+		return try_to_force_load(mod,
+					 "no versions for exported symbols");
 	}
 #endif
+	return 0;
+}
 
-	/* Now do relocations. */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		const char *strtab = (char *)sechdrs[strindex].sh_addr;
-		unsigned int info = sechdrs[i].sh_info;
-
-		/* Not a valid relocation section? */
-		if (info >= hdr->e_shnum)
-			continue;
-
-		/* Don't bother with non-allocated sections */
-		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_REL)
-			err = apply_relocate(sechdrs, strtab, symindex, i,mod);
-		else if (sechdrs[i].sh_type == SHT_RELA)
-			err = apply_relocate_add(sechdrs, strtab, symindex, i,
-						 mod);
-		if (err < 0)
-			goto cleanup;
-	}
-
-  	/* Set up and sort exception table */
-	mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table",
-				    sizeof(*mod->extable), &mod->num_exentries);
-	sort_extable(mod->extable, mod->extable + mod->num_exentries);
-
-	/* Finally, copy percpu area over. */
-	percpu_modcopy(mod, (void *)sechdrs[pcpuindex].sh_addr,
-		       sechdrs[pcpuindex].sh_size);
-
-	add_kallsyms(mod, sechdrs, hdr->e_shnum, symindex, strindex,
-		     symoffs, stroffs, secstrings, strmap);
-	kfree(strmap);
-	strmap = NULL;
-
-	if (!mod->taints)
-		debug = section_objs(hdr, sechdrs, secstrings, "__verbose",
-				     sizeof(*debug), &num_debug);
-
-	err = module_finalize(hdr, sechdrs, mod);
-	if (err < 0)
-		goto cleanup;
+static void flush_module_icache(const struct module *mod)
+{
+	mm_segment_t old_fs;
 
 	/* flush the icache in correct context */
 	old_fs = get_fs();
@@ -2511,11 +2448,160 @@ static noinline struct module *load_module(void __user *umod,
 			   (unsigned long)mod->module_core + mod->core_size);
 
 	set_fs(old_fs);
+}
 
-	mod->args = args;
-	if (section_addr(hdr, sechdrs, secstrings, "__obsparm"))
-		printk(KERN_WARNING "%s: Ignoring obsolete parameters\n",
-		       mod->name);
+static struct module *layout_and_allocate(struct load_info *info)
+{
+	/* Module within temporary copy. */
+	struct module *mod;
+	Elf_Shdr *pcpusec;
+	int err;
+
+	mod = setup_load_info(info);
+	if (IS_ERR(mod))
+		return mod;
+
+	err = check_modinfo(mod, info);
+	if (err)
+		return ERR_PTR(err);
+
+	/* Allow arches to frob section contents and sizes.  */
+	err = module_frob_arch_sections(info->hdr, info->sechdrs,
+					info->secstrings, mod);
+	if (err < 0)
+		goto out;
+
+	pcpusec = &info->sechdrs[info->index.pcpu];
+	if (pcpusec->sh_size) {
+		/* We have a special allocation for this section. */
+		err = percpu_modalloc(mod,
+				      pcpusec->sh_size, pcpusec->sh_addralign);
+		if (err)
+			goto out;
+		pcpusec->sh_flags &= ~(unsigned long)SHF_ALLOC;
+	}
+
+	/* Determine total sizes, and put offsets in sh_entsize.  For now
+	   this is done generically; there doesn't appear to be any
+	   special cases for the architectures. */
+	layout_sections(mod, info);
+
+	info->strmap = kzalloc(BITS_TO_LONGS(info->sechdrs[info->index.str].sh_size)
+			 * sizeof(long), GFP_KERNEL);
+	if (!info->strmap) {
+		err = -ENOMEM;
+		goto free_percpu;
+	}
+	layout_symtab(mod, info);
+
+	/* Allocate and move to the final place */
+	err = move_module(mod, info);
+	if (err)
+		goto free_strmap;
+
+	/* Module has been copied to its final place now: return it. */
+	mod = (void *)info->sechdrs[info->index.mod].sh_addr;
+	kmemleak_load_module(mod, info);
+	return mod;
+
+free_strmap:
+	kfree(info->strmap);
+free_percpu:
+	percpu_modfree(mod);
+out:
+	return ERR_PTR(err);
+}
+
+/* mod is no longer valid after this! */
+static void module_deallocate(struct module *mod, struct load_info *info)
+{
+	kfree(info->strmap);
+	percpu_modfree(mod);
+	module_free(mod, mod->module_init);
+	module_free(mod, mod->module_core);
+}
+
+static int post_relocation(struct module *mod, const struct load_info *info)
+{
+	/* Sort exception table now relocations are done. */
+	sort_extable(mod->extable, mod->extable + mod->num_exentries);
+
+	/* Copy relocated percpu area over. */
+	percpu_modcopy(mod, (void *)info->sechdrs[info->index.pcpu].sh_addr,
+		       info->sechdrs[info->index.pcpu].sh_size);
+
+	/* Setup kallsyms-specific fields. */
+	add_kallsyms(mod, info);
+
+	/* Arch-specific module finalizing. */
+	return module_finalize(info->hdr, info->sechdrs, mod);
+}
+
+/* Allocate and load the module: note that size of section 0 is always
+   zero, and we rely on this for optional sections. */
+static struct module *load_module(void __user *umod,
+				  unsigned long len,
+				  const char __user *uargs)
+{
+	struct load_info info = { NULL, };
+	struct module *mod;
+	long err;
+
+	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
+	       umod, len, uargs);
+
+	/* Copy in the blobs from userspace, check they are vaguely sane. */
+	err = copy_and_check(&info, umod, len, uargs);
+	if (err)
+		return ERR_PTR(err);
+
+	/* Figure out module layout, and allocate all the memory. */
+	mod = layout_and_allocate(&info);
+	if (IS_ERR(mod)) {
+		err = PTR_ERR(mod);
+		goto free_copy;
+	}
+
+	/* Now module is in final location, initialize linked lists, etc. */
+	err = module_unload_init(mod);
+	if (err)
+		goto free_module;
+
+	/* Now we've got everything in the final locations, we can
+	 * find optional sections. */
+	find_module_sections(mod, &info);
+
+	err = check_module_license_and_versions(mod);
+	if (err)
+		goto free_unload;
+
+	/* Set up MODINFO_ATTR fields */
+	setup_modinfo(mod, &info);
+
+	/* Fix up syms, so that st_value is a pointer to location. */
+	err = simplify_symbols(mod, &info);
+	if (err < 0)
+		goto free_modinfo;
+
+	err = apply_relocations(mod, &info);
+	if (err < 0)
+		goto free_modinfo;
+
+	err = post_relocation(mod, &info);
+	if (err < 0)
+		goto free_modinfo;
+
+	flush_module_icache(mod);
+
+	/* Now copy in args */
+	mod->args = strndup_user(uargs, ~0UL >> 1);
+	if (IS_ERR(mod->args)) {
+		err = PTR_ERR(mod->args);
+		goto free_arch_cleanup;
+	}
+
+	/* Mark state as coming so strong_try_module_get() ignores us. */
+	mod->state = MODULE_STATE_COMING;
 
 	/* Now sew it into the lists so we can get lockdep and oops
 	 * info during argument parsing.  Noone should access us, since
@@ -2530,8 +2616,9 @@ static noinline struct module *load_module(void __user *umod,
 		goto unlock;
 	}
 
-	if (debug)
-		dynamic_debug_setup(debug, num_debug);
+	/* This has to be done once we're sure module name is unique. */
+	if (!mod->taints)
+		dynamic_debug_setup(info.debug, info.num_debug);
 
 	/* Find duplicate symbols */
 	err = verify_export_symbols(mod);
@@ -2541,23 +2628,22 @@ static noinline struct module *load_module(void __user *umod,
 	list_add_rcu(&mod->list, &modules);
 	mutex_unlock(&module_mutex);
 
+	/* Module is ready to execute: parsing args may do that. */
 	err = parse_args(mod->name, mod->args, mod->kp, mod->num_kp, NULL);
 	if (err < 0)
 		goto unlink;
 
-	err = mod_sysfs_setup(mod, mod->kp, mod->num_kp);
+	/* Link in to syfs. */
+	err = mod_sysfs_setup(mod, &info, mod->kp, mod->num_kp);
 	if (err < 0)
 		goto unlink;
 
-	add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
-	add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs);
-
-	/* Get rid of temporary copy */
-	vfree(hdr);
-
-	trace_module_load(mod);
+	/* Get rid of temporary copy and strmap. */
+	kfree(info.strmap);
+	free_copy(&info);
 
 	/* Done! */
+	trace_module_load(mod);
 	return mod;
 
  unlink:
@@ -2565,35 +2651,23 @@ static noinline struct module *load_module(void __user *umod,
 	/* Unlink carefully: kallsyms could be walking list. */
 	list_del_rcu(&mod->list);
  ddebug:
-	dynamic_debug_remove(debug);
+	if (!mod->taints)
+		dynamic_debug_remove(info.debug);
  unlock:
 	mutex_unlock(&module_mutex);
 	synchronize_sched();
+	kfree(mod->args);
+ free_arch_cleanup:
 	module_arch_cleanup(mod);
- cleanup:
+ free_modinfo:
 	free_modinfo(mod);
+ free_unload:
 	module_unload_free(mod);
-#if defined(CONFIG_MODULE_UNLOAD)
-	free_percpu(mod->refptr);
- free_init:
-#endif
-	module_free(mod, mod->module_init);
- free_core:
-	module_free(mod, mod->module_core);
-	/* mod will be freed with core. Don't access it beyond this line! */
- free_percpu:
-	free_percpu(percpu);
- free_mod:
-	kfree(args);
-	kfree(strmap);
- free_hdr:
-	vfree(hdr);
+ free_module:
+	module_deallocate(mod, &info);
+ free_copy:
+	free_copy(&info);
 	return ERR_PTR(err);
-
- truncated:
-	printk(KERN_ERR "Module len %lu truncated\n", len);
-	err = -ENOEXEC;
-	goto free_hdr;
 }
 
 /* Call module constructors. */
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index ff86c558af4..403d1804b19 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -214,7 +214,7 @@ static void perf_unpin_context(struct perf_event_context *ctx)
 
 static inline u64 perf_clock(void)
 {
-	return cpu_clock(raw_smp_processor_id());
+	return local_clock();
 }
 
 /*
@@ -675,7 +675,6 @@ group_sched_in(struct perf_event *group_event,
 	struct perf_event *event, *partial_group = NULL;
 	const struct pmu *pmu = group_event->pmu;
 	bool txn = false;
-	int ret;
 
 	if (group_event->state == PERF_EVENT_STATE_OFF)
 		return 0;
@@ -703,14 +702,8 @@ group_sched_in(struct perf_event *group_event,
 		}
 	}
 
-	if (!txn)
-		return 0;
-
-	ret = pmu->commit_txn(pmu);
-	if (!ret) {
-		pmu->cancel_txn(pmu);
+	if (!txn || !pmu->commit_txn(pmu))
 		return 0;
-	}
 
 group_error:
 	/*
@@ -1155,9 +1148,9 @@ static void __perf_event_sync_stat(struct perf_event *event,
 	 * In order to keep per-task stats reliable we need to flip the event
 	 * values when we flip the contexts.
 	 */
-	value = atomic64_read(&next_event->count);
-	value = atomic64_xchg(&event->count, value);
-	atomic64_set(&next_event->count, value);
+	value = local64_read(&next_event->count);
+	value = local64_xchg(&event->count, value);
+	local64_set(&next_event->count, value);
 
 	swap(event->total_time_enabled, next_event->total_time_enabled);
 	swap(event->total_time_running, next_event->total_time_running);
@@ -1547,10 +1540,10 @@ static void perf_adjust_period(struct perf_event *event, u64 nsec, u64 count)
 
 	hwc->sample_period = sample_period;
 
-	if (atomic64_read(&hwc->period_left) > 8*sample_period) {
+	if (local64_read(&hwc->period_left) > 8*sample_period) {
 		perf_disable();
 		perf_event_stop(event);
-		atomic64_set(&hwc->period_left, 0);
+		local64_set(&hwc->period_left, 0);
 		perf_event_start(event);
 		perf_enable();
 	}
@@ -1591,7 +1584,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx)
 
 		perf_disable();
 		event->pmu->read(event);
-		now = atomic64_read(&event->count);
+		now = local64_read(&event->count);
 		delta = now - hwc->freq_count_stamp;
 		hwc->freq_count_stamp = now;
 
@@ -1743,6 +1736,11 @@ static void __perf_event_read(void *info)
 	event->pmu->read(event);
 }
 
+static inline u64 perf_event_count(struct perf_event *event)
+{
+	return local64_read(&event->count) + atomic64_read(&event->child_count);
+}
+
 static u64 perf_event_read(struct perf_event *event)
 {
 	/*
@@ -1762,7 +1760,7 @@ static u64 perf_event_read(struct perf_event *event)
 		raw_spin_unlock_irqrestore(&ctx->lock, flags);
 	}
 
-	return atomic64_read(&event->count);
+	return perf_event_count(event);
 }
 
 /*
@@ -1883,7 +1881,7 @@ static void free_event_rcu(struct rcu_head *head)
 }
 
 static void perf_pending_sync(struct perf_event *event);
-static void perf_mmap_data_put(struct perf_mmap_data *data);
+static void perf_buffer_put(struct perf_buffer *buffer);
 
 static void free_event(struct perf_event *event)
 {
@@ -1891,7 +1889,7 @@ static void free_event(struct perf_event *event)
 
 	if (!event->parent) {
 		atomic_dec(&nr_events);
-		if (event->attr.mmap)
+		if (event->attr.mmap || event->attr.mmap_data)
 			atomic_dec(&nr_mmap_events);
 		if (event->attr.comm)
 			atomic_dec(&nr_comm_events);
@@ -1899,9 +1897,9 @@ static void free_event(struct perf_event *event)
 			atomic_dec(&nr_task_events);
 	}
 
-	if (event->data) {
-		perf_mmap_data_put(event->data);
-		event->data = NULL;
+	if (event->buffer) {
+		perf_buffer_put(event->buffer);
+		event->buffer = NULL;
 	}
 
 	if (event->destroy)
@@ -2126,13 +2124,13 @@ perf_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 static unsigned int perf_poll(struct file *file, poll_table *wait)
 {
 	struct perf_event *event = file->private_data;
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	unsigned int events = POLL_HUP;
 
 	rcu_read_lock();
-	data = rcu_dereference(event->data);
-	if (data)
-		events = atomic_xchg(&data->poll, 0);
+	buffer = rcu_dereference(event->buffer);
+	if (buffer)
+		events = atomic_xchg(&buffer->poll, 0);
 	rcu_read_unlock();
 
 	poll_wait(file, &event->waitq, wait);
@@ -2143,7 +2141,7 @@ static unsigned int perf_poll(struct file *file, poll_table *wait)
 static void perf_event_reset(struct perf_event *event)
 {
 	(void)perf_event_read(event);
-	atomic64_set(&event->count, 0);
+	local64_set(&event->count, 0);
 	perf_event_update_userpage(event);
 }
 
@@ -2342,14 +2340,14 @@ static int perf_event_index(struct perf_event *event)
 void perf_event_update_userpage(struct perf_event *event)
 {
 	struct perf_event_mmap_page *userpg;
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 
 	rcu_read_lock();
-	data = rcu_dereference(event->data);
-	if (!data)
+	buffer = rcu_dereference(event->buffer);
+	if (!buffer)
 		goto unlock;
 
-	userpg = data->user_page;
+	userpg = buffer->user_page;
 
 	/*
 	 * Disable preemption so as to not let the corresponding user-space
@@ -2359,9 +2357,9 @@ void perf_event_update_userpage(struct perf_event *event)
 	++userpg->lock;
 	barrier();
 	userpg->index = perf_event_index(event);
-	userpg->offset = atomic64_read(&event->count);
+	userpg->offset = perf_event_count(event);
 	if (event->state == PERF_EVENT_STATE_ACTIVE)
-		userpg->offset -= atomic64_read(&event->hw.prev_count);
+		userpg->offset -= local64_read(&event->hw.prev_count);
 
 	userpg->time_enabled = event->total_time_enabled +
 			atomic64_read(&event->child_total_time_enabled);
@@ -2376,6 +2374,25 @@ unlock:
 	rcu_read_unlock();
 }
 
+static unsigned long perf_data_size(struct perf_buffer *buffer);
+
+static void
+perf_buffer_init(struct perf_buffer *buffer, long watermark, int flags)
+{
+	long max_size = perf_data_size(buffer);
+
+	if (watermark)
+		buffer->watermark = min(max_size, watermark);
+
+	if (!buffer->watermark)
+		buffer->watermark = max_size / 2;
+
+	if (flags & PERF_BUFFER_WRITABLE)
+		buffer->writable = 1;
+
+	atomic_set(&buffer->refcount, 1);
+}
+
 #ifndef CONFIG_PERF_USE_VMALLOC
 
 /*
@@ -2383,15 +2400,15 @@ unlock:
  */
 
 static struct page *
-perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+perf_mmap_to_page(struct perf_buffer *buffer, unsigned long pgoff)
 {
-	if (pgoff > data->nr_pages)
+	if (pgoff > buffer->nr_pages)
 		return NULL;
 
 	if (pgoff == 0)
-		return virt_to_page(data->user_page);
+		return virt_to_page(buffer->user_page);
 
-	return virt_to_page(data->data_pages[pgoff - 1]);
+	return virt_to_page(buffer->data_pages[pgoff - 1]);
 }
 
 static void *perf_mmap_alloc_page(int cpu)
@@ -2407,42 +2424,44 @@ static void *perf_mmap_alloc_page(int cpu)
 	return page_address(page);
 }
 
-static struct perf_mmap_data *
-perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+static struct perf_buffer *
+perf_buffer_alloc(int nr_pages, long watermark, int cpu, int flags)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	unsigned long size;
 	int i;
 
-	size = sizeof(struct perf_mmap_data);
+	size = sizeof(struct perf_buffer);
 	size += nr_pages * sizeof(void *);
 
-	data = kzalloc(size, GFP_KERNEL);
-	if (!data)
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
 		goto fail;
 
-	data->user_page = perf_mmap_alloc_page(event->cpu);
-	if (!data->user_page)
+	buffer->user_page = perf_mmap_alloc_page(cpu);
+	if (!buffer->user_page)
 		goto fail_user_page;
 
 	for (i = 0; i < nr_pages; i++) {
-		data->data_pages[i] = perf_mmap_alloc_page(event->cpu);
-		if (!data->data_pages[i])
+		buffer->data_pages[i] = perf_mmap_alloc_page(cpu);
+		if (!buffer->data_pages[i])
 			goto fail_data_pages;
 	}
 
-	data->nr_pages = nr_pages;
+	buffer->nr_pages = nr_pages;
+
+	perf_buffer_init(buffer, watermark, flags);
 
-	return data;
+	return buffer;
 
 fail_data_pages:
 	for (i--; i >= 0; i--)
-		free_page((unsigned long)data->data_pages[i]);
+		free_page((unsigned long)buffer->data_pages[i]);
 
-	free_page((unsigned long)data->user_page);
+	free_page((unsigned long)buffer->user_page);
 
 fail_user_page:
-	kfree(data);
+	kfree(buffer);
 
 fail:
 	return NULL;
@@ -2456,17 +2475,17 @@ static void perf_mmap_free_page(unsigned long addr)
 	__free_page(page);
 }
 
-static void perf_mmap_data_free(struct perf_mmap_data *data)
+static void perf_buffer_free(struct perf_buffer *buffer)
 {
 	int i;
 
-	perf_mmap_free_page((unsigned long)data->user_page);
-	for (i = 0; i < data->nr_pages; i++)
-		perf_mmap_free_page((unsigned long)data->data_pages[i]);
-	kfree(data);
+	perf_mmap_free_page((unsigned long)buffer->user_page);
+	for (i = 0; i < buffer->nr_pages; i++)
+		perf_mmap_free_page((unsigned long)buffer->data_pages[i]);
+	kfree(buffer);
 }
 
-static inline int page_order(struct perf_mmap_data *data)
+static inline int page_order(struct perf_buffer *buffer)
 {
 	return 0;
 }
@@ -2479,18 +2498,18 @@ static inline int page_order(struct perf_mmap_data *data)
  * Required for architectures that have d-cache aliasing issues.
  */
 
-static inline int page_order(struct perf_mmap_data *data)
+static inline int page_order(struct perf_buffer *buffer)
 {
-	return data->page_order;
+	return buffer->page_order;
 }
 
 static struct page *
-perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+perf_mmap_to_page(struct perf_buffer *buffer, unsigned long pgoff)
 {
-	if (pgoff > (1UL << page_order(data)))
+	if (pgoff > (1UL << page_order(buffer)))
 		return NULL;
 
-	return vmalloc_to_page((void *)data->user_page + pgoff * PAGE_SIZE);
+	return vmalloc_to_page((void *)buffer->user_page + pgoff * PAGE_SIZE);
 }
 
 static void perf_mmap_unmark_page(void *addr)
@@ -2500,57 +2519,59 @@ static void perf_mmap_unmark_page(void *addr)
 	page->mapping = NULL;
 }
 
-static void perf_mmap_data_free_work(struct work_struct *work)
+static void perf_buffer_free_work(struct work_struct *work)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	void *base;
 	int i, nr;
 
-	data = container_of(work, struct perf_mmap_data, work);
-	nr = 1 << page_order(data);
+	buffer = container_of(work, struct perf_buffer, work);
+	nr = 1 << page_order(buffer);
 
-	base = data->user_page;
+	base = buffer->user_page;
 	for (i = 0; i < nr + 1; i++)
 		perf_mmap_unmark_page(base + (i * PAGE_SIZE));
 
 	vfree(base);
-	kfree(data);
+	kfree(buffer);
 }
 
-static void perf_mmap_data_free(struct perf_mmap_data *data)
+static void perf_buffer_free(struct perf_buffer *buffer)
 {
-	schedule_work(&data->work);
+	schedule_work(&buffer->work);
 }
 
-static struct perf_mmap_data *
-perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+static struct perf_buffer *
+perf_buffer_alloc(int nr_pages, long watermark, int cpu, int flags)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	unsigned long size;
 	void *all_buf;
 
-	size = sizeof(struct perf_mmap_data);
+	size = sizeof(struct perf_buffer);
 	size += sizeof(void *);
 
-	data = kzalloc(size, GFP_KERNEL);
-	if (!data)
+	buffer = kzalloc(size, GFP_KERNEL);
+	if (!buffer)
 		goto fail;
 
-	INIT_WORK(&data->work, perf_mmap_data_free_work);
+	INIT_WORK(&buffer->work, perf_buffer_free_work);
 
 	all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE);
 	if (!all_buf)
 		goto fail_all_buf;
 
-	data->user_page = all_buf;
-	data->data_pages[0] = all_buf + PAGE_SIZE;
-	data->page_order = ilog2(nr_pages);
-	data->nr_pages = 1;
+	buffer->user_page = all_buf;
+	buffer->data_pages[0] = all_buf + PAGE_SIZE;
+	buffer->page_order = ilog2(nr_pages);
+	buffer->nr_pages = 1;
+
+	perf_buffer_init(buffer, watermark, flags);
 
-	return data;
+	return buffer;
 
 fail_all_buf:
-	kfree(data);
+	kfree(buffer);
 
 fail:
 	return NULL;
@@ -2558,15 +2579,15 @@ fail:
 
 #endif
 
-static unsigned long perf_data_size(struct perf_mmap_data *data)
+static unsigned long perf_data_size(struct perf_buffer *buffer)
 {
-	return data->nr_pages << (PAGE_SHIFT + page_order(data));
+	return buffer->nr_pages << (PAGE_SHIFT + page_order(buffer));
 }
 
 static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct perf_event *event = vma->vm_file->private_data;
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	int ret = VM_FAULT_SIGBUS;
 
 	if (vmf->flags & FAULT_FLAG_MKWRITE) {
@@ -2576,14 +2597,14 @@ static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	}
 
 	rcu_read_lock();
-	data = rcu_dereference(event->data);
-	if (!data)
+	buffer = rcu_dereference(event->buffer);
+	if (!buffer)
 		goto unlock;
 
 	if (vmf->pgoff && (vmf->flags & FAULT_FLAG_WRITE))
 		goto unlock;
 
-	vmf->page = perf_mmap_to_page(data, vmf->pgoff);
+	vmf->page = perf_mmap_to_page(buffer, vmf->pgoff);
 	if (!vmf->page)
 		goto unlock;
 
@@ -2598,52 +2619,35 @@ unlock:
 	return ret;
 }
 
-static void
-perf_mmap_data_init(struct perf_event *event, struct perf_mmap_data *data)
-{
-	long max_size = perf_data_size(data);
-
-	if (event->attr.watermark) {
-		data->watermark = min_t(long, max_size,
-					event->attr.wakeup_watermark);
-	}
-
-	if (!data->watermark)
-		data->watermark = max_size / 2;
-
-	atomic_set(&data->refcount, 1);
-	rcu_assign_pointer(event->data, data);
-}
-
-static void perf_mmap_data_free_rcu(struct rcu_head *rcu_head)
+static void perf_buffer_free_rcu(struct rcu_head *rcu_head)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 
-	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
-	perf_mmap_data_free(data);
+	buffer = container_of(rcu_head, struct perf_buffer, rcu_head);
+	perf_buffer_free(buffer);
 }
 
-static struct perf_mmap_data *perf_mmap_data_get(struct perf_event *event)
+static struct perf_buffer *perf_buffer_get(struct perf_event *event)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 
 	rcu_read_lock();
-	data = rcu_dereference(event->data);
-	if (data) {
-		if (!atomic_inc_not_zero(&data->refcount))
-			data = NULL;
+	buffer = rcu_dereference(event->buffer);
+	if (buffer) {
+		if (!atomic_inc_not_zero(&buffer->refcount))
+			buffer = NULL;
 	}
 	rcu_read_unlock();
 
-	return data;
+	return buffer;
 }
 
-static void perf_mmap_data_put(struct perf_mmap_data *data)
+static void perf_buffer_put(struct perf_buffer *buffer)
 {
-	if (!atomic_dec_and_test(&data->refcount))
+	if (!atomic_dec_and_test(&buffer->refcount))
 		return;
 
-	call_rcu(&data->rcu_head, perf_mmap_data_free_rcu);
+	call_rcu(&buffer->rcu_head, perf_buffer_free_rcu);
 }
 
 static void perf_mmap_open(struct vm_area_struct *vma)
@@ -2658,16 +2662,16 @@ static void perf_mmap_close(struct vm_area_struct *vma)
 	struct perf_event *event = vma->vm_file->private_data;
 
 	if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
-		unsigned long size = perf_data_size(event->data);
+		unsigned long size = perf_data_size(event->buffer);
 		struct user_struct *user = event->mmap_user;
-		struct perf_mmap_data *data = event->data;
+		struct perf_buffer *buffer = event->buffer;
 
 		atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
 		vma->vm_mm->locked_vm -= event->mmap_locked;
-		rcu_assign_pointer(event->data, NULL);
+		rcu_assign_pointer(event->buffer, NULL);
 		mutex_unlock(&event->mmap_mutex);
 
-		perf_mmap_data_put(data);
+		perf_buffer_put(buffer);
 		free_uid(user);
 	}
 }
@@ -2685,11 +2689,11 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	unsigned long user_locked, user_lock_limit;
 	struct user_struct *user = current_user();
 	unsigned long locked, lock_limit;
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	unsigned long vma_size;
 	unsigned long nr_pages;
 	long user_extra, extra;
-	int ret = 0;
+	int ret = 0, flags = 0;
 
 	/*
 	 * Don't allow mmap() of inherited per-task counters. This would
@@ -2706,7 +2710,7 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 	nr_pages = (vma_size / PAGE_SIZE) - 1;
 
 	/*
-	 * If we have data pages ensure they're a power-of-two number, so we
+	 * If we have buffer pages ensure they're a power-of-two number, so we
 	 * can do bitmasks instead of modulo.
 	 */
 	if (nr_pages != 0 && !is_power_of_2(nr_pages))
@@ -2720,9 +2724,9 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
 	mutex_lock(&event->mmap_mutex);
-	if (event->data) {
-		if (event->data->nr_pages == nr_pages)
-			atomic_inc(&event->data->refcount);
+	if (event->buffer) {
+		if (event->buffer->nr_pages == nr_pages)
+			atomic_inc(&event->buffer->refcount);
 		else
 			ret = -EINVAL;
 		goto unlock;
@@ -2752,17 +2756,18 @@ static int perf_mmap(struct file *file, struct vm_area_struct *vma)
 		goto unlock;
 	}
 
-	WARN_ON(event->data);
+	WARN_ON(event->buffer);
+
+	if (vma->vm_flags & VM_WRITE)
+		flags |= PERF_BUFFER_WRITABLE;
 
-	data = perf_mmap_data_alloc(event, nr_pages);
-	if (!data) {
+	buffer = perf_buffer_alloc(nr_pages, event->attr.wakeup_watermark,
+				   event->cpu, flags);
+	if (!buffer) {
 		ret = -ENOMEM;
 		goto unlock;
 	}
-
-	perf_mmap_data_init(event, data);
-	if (vma->vm_flags & VM_WRITE)
-		event->data->writable = 1;
+	rcu_assign_pointer(event->buffer, buffer);
 
 	atomic_long_add(user_extra, &user->locked_vm);
 	event->mmap_locked = extra;
@@ -2941,11 +2946,6 @@ __weak struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	return NULL;
 }
 
-__weak
-void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
-{
-}
-
 
 /*
  * We assume there is only KVM supporting the callbacks.
@@ -2971,15 +2971,15 @@ EXPORT_SYMBOL_GPL(perf_unregister_guest_info_callbacks);
 /*
  * Output
  */
-static bool perf_output_space(struct perf_mmap_data *data, unsigned long tail,
+static bool perf_output_space(struct perf_buffer *buffer, unsigned long tail,
 			      unsigned long offset, unsigned long head)
 {
 	unsigned long mask;
 
-	if (!data->writable)
+	if (!buffer->writable)
 		return true;
 
-	mask = perf_data_size(data) - 1;
+	mask = perf_data_size(buffer) - 1;
 
 	offset = (offset - tail) & mask;
 	head   = (head   - tail) & mask;
@@ -2992,7 +2992,7 @@ static bool perf_output_space(struct perf_mmap_data *data, unsigned long tail,
 
 static void perf_output_wakeup(struct perf_output_handle *handle)
 {
-	atomic_set(&handle->data->poll, POLL_IN);
+	atomic_set(&handle->buffer->poll, POLL_IN);
 
 	if (handle->nmi) {
 		handle->event->pending_wakeup = 1;
@@ -3012,45 +3012,45 @@ static void perf_output_wakeup(struct perf_output_handle *handle)
  */
 static void perf_output_get_handle(struct perf_output_handle *handle)
 {
-	struct perf_mmap_data *data = handle->data;
+	struct perf_buffer *buffer = handle->buffer;
 
 	preempt_disable();
-	local_inc(&data->nest);
-	handle->wakeup = local_read(&data->wakeup);
+	local_inc(&buffer->nest);
+	handle->wakeup = local_read(&buffer->wakeup);
 }
 
 static void perf_output_put_handle(struct perf_output_handle *handle)
 {
-	struct perf_mmap_data *data = handle->data;
+	struct perf_buffer *buffer = handle->buffer;
 	unsigned long head;
 
 again:
-	head = local_read(&data->head);
+	head = local_read(&buffer->head);
 
 	/*
 	 * IRQ/NMI can happen here, which means we can miss a head update.
 	 */
 
-	if (!local_dec_and_test(&data->nest))
+	if (!local_dec_and_test(&buffer->nest))
 		goto out;
 
 	/*
 	 * Publish the known good head. Rely on the full barrier implied
-	 * by atomic_dec_and_test() order the data->head read and this
+	 * by atomic_dec_and_test() order the buffer->head read and this
 	 * write.
 	 */
-	data->user_page->data_head = head;
+	buffer->user_page->data_head = head;
 
 	/*
 	 * Now check if we missed an update, rely on the (compiler)
-	 * barrier in atomic_dec_and_test() to re-read data->head.
+	 * barrier in atomic_dec_and_test() to re-read buffer->head.
 	 */
-	if (unlikely(head != local_read(&data->head))) {
-		local_inc(&data->nest);
+	if (unlikely(head != local_read(&buffer->head))) {
+		local_inc(&buffer->nest);
 		goto again;
 	}
 
-	if (handle->wakeup != local_read(&data->wakeup))
+	if (handle->wakeup != local_read(&buffer->wakeup))
 		perf_output_wakeup(handle);
 
  out:
@@ -3070,12 +3070,12 @@ __always_inline void perf_output_copy(struct perf_output_handle *handle,
 		buf += size;
 		handle->size -= size;
 		if (!handle->size) {
-			struct perf_mmap_data *data = handle->data;
+			struct perf_buffer *buffer = handle->buffer;
 
 			handle->page++;
-			handle->page &= data->nr_pages - 1;
-			handle->addr = data->data_pages[handle->page];
-			handle->size = PAGE_SIZE << page_order(data);
+			handle->page &= buffer->nr_pages - 1;
+			handle->addr = buffer->data_pages[handle->page];
+			handle->size = PAGE_SIZE << page_order(buffer);
 		}
 	} while (len);
 }
@@ -3084,7 +3084,7 @@ int perf_output_begin(struct perf_output_handle *handle,
 		      struct perf_event *event, unsigned int size,
 		      int nmi, int sample)
 {
-	struct perf_mmap_data *data;
+	struct perf_buffer *buffer;
 	unsigned long tail, offset, head;
 	int have_lost;
 	struct {
@@ -3100,19 +3100,19 @@ int perf_output_begin(struct perf_output_handle *handle,
 	if (event->parent)
 		event = event->parent;
 
-	data = rcu_dereference(event->data);
-	if (!data)
+	buffer = rcu_dereference(event->buffer);
+	if (!buffer)
 		goto out;
 
-	handle->data	= data;
+	handle->buffer	= buffer;
 	handle->event	= event;
 	handle->nmi	= nmi;
 	handle->sample	= sample;
 
-	if (!data->nr_pages)
+	if (!buffer->nr_pages)
 		goto out;
 
-	have_lost = local_read(&data->lost);
+	have_lost = local_read(&buffer->lost);
 	if (have_lost)
 		size += sizeof(lost_event);
 
@@ -3124,30 +3124,30 @@ int perf_output_begin(struct perf_output_handle *handle,
 		 * tail pointer. So that all reads will be completed before the
 		 * write is issued.
 		 */
-		tail = ACCESS_ONCE(data->user_page->data_tail);
+		tail = ACCESS_ONCE(buffer->user_page->data_tail);
 		smp_rmb();
-		offset = head = local_read(&data->head);
+		offset = head = local_read(&buffer->head);
 		head += size;
-		if (unlikely(!perf_output_space(data, tail, offset, head)))
+		if (unlikely(!perf_output_space(buffer, tail, offset, head)))
 			goto fail;
-	} while (local_cmpxchg(&data->head, offset, head) != offset);
+	} while (local_cmpxchg(&buffer->head, offset, head) != offset);
 
-	if (head - local_read(&data->wakeup) > data->watermark)
-		local_add(data->watermark, &data->wakeup);
+	if (head - local_read(&buffer->wakeup) > buffer->watermark)
+		local_add(buffer->watermark, &buffer->wakeup);
 
-	handle->page = offset >> (PAGE_SHIFT + page_order(data));
-	handle->page &= data->nr_pages - 1;
-	handle->size = offset & ((PAGE_SIZE << page_order(data)) - 1);
-	handle->addr = data->data_pages[handle->page];
+	handle->page = offset >> (PAGE_SHIFT + page_order(buffer));
+	handle->page &= buffer->nr_pages - 1;
+	handle->size = offset & ((PAGE_SIZE << page_order(buffer)) - 1);
+	handle->addr = buffer->data_pages[handle->page];
 	handle->addr += handle->size;
-	handle->size = (PAGE_SIZE << page_order(data)) - handle->size;
+	handle->size = (PAGE_SIZE << page_order(buffer)) - handle->size;
 
 	if (have_lost) {
 		lost_event.header.type = PERF_RECORD_LOST;
 		lost_event.header.misc = 0;
 		lost_event.header.size = sizeof(lost_event);
 		lost_event.id          = event->id;
-		lost_event.lost        = local_xchg(&data->lost, 0);
+		lost_event.lost        = local_xchg(&buffer->lost, 0);
 
 		perf_output_put(handle, lost_event);
 	}
@@ -3155,7 +3155,7 @@ int perf_output_begin(struct perf_output_handle *handle,
 	return 0;
 
 fail:
-	local_inc(&data->lost);
+	local_inc(&buffer->lost);
 	perf_output_put_handle(handle);
 out:
 	rcu_read_unlock();
@@ -3166,15 +3166,15 @@ out:
 void perf_output_end(struct perf_output_handle *handle)
 {
 	struct perf_event *event = handle->event;
-	struct perf_mmap_data *data = handle->data;
+	struct perf_buffer *buffer = handle->buffer;
 
 	int wakeup_events = event->attr.wakeup_events;
 
 	if (handle->sample && wakeup_events) {
-		int events = local_inc_return(&data->events);
+		int events = local_inc_return(&buffer->events);
 		if (events >= wakeup_events) {
-			local_sub(wakeup_events, &data->events);
-			local_inc(&data->wakeup);
+			local_sub(wakeup_events, &buffer->events);
+			local_inc(&buffer->wakeup);
 		}
 	}
 
@@ -3211,7 +3211,7 @@ static void perf_output_read_one(struct perf_output_handle *handle,
 	u64 values[4];
 	int n = 0;
 
-	values[n++] = atomic64_read(&event->count);
+	values[n++] = perf_event_count(event);
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
 		values[n++] = event->total_time_enabled +
 			atomic64_read(&event->child_total_time_enabled);
@@ -3248,7 +3248,7 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 	if (leader != event)
 		leader->pmu->read(leader);
 
-	values[n++] = atomic64_read(&leader->count);
+	values[n++] = perf_event_count(leader);
 	if (read_format & PERF_FORMAT_ID)
 		values[n++] = primary_event_id(leader);
 
@@ -3260,7 +3260,7 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 		if (sub != event)
 			sub->pmu->read(sub);
 
-		values[n++] = atomic64_read(&sub->count);
+		values[n++] = perf_event_count(sub);
 		if (read_format & PERF_FORMAT_ID)
 			values[n++] = primary_event_id(sub);
 
@@ -3491,7 +3491,7 @@ perf_event_read_event(struct perf_event *event,
 /*
  * task tracking -- fork/exit
  *
- * enabled by: attr.comm | attr.mmap | attr.task
+ * enabled by: attr.comm | attr.mmap | attr.mmap_data | attr.task
  */
 
 struct perf_task_event {
@@ -3541,7 +3541,8 @@ static int perf_event_task_match(struct perf_event *event)
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
 		return 0;
 
-	if (event->attr.comm || event->attr.mmap || event->attr.task)
+	if (event->attr.comm || event->attr.mmap ||
+	    event->attr.mmap_data || event->attr.task)
 		return 1;
 
 	return 0;
@@ -3766,7 +3767,8 @@ static void perf_event_mmap_output(struct perf_event *event,
 }
 
 static int perf_event_mmap_match(struct perf_event *event,
-				   struct perf_mmap_event *mmap_event)
+				   struct perf_mmap_event *mmap_event,
+				   int executable)
 {
 	if (event->state < PERF_EVENT_STATE_INACTIVE)
 		return 0;
@@ -3774,19 +3776,21 @@ static int perf_event_mmap_match(struct perf_event *event,
 	if (event->cpu != -1 && event->cpu != smp_processor_id())
 		return 0;
 
-	if (event->attr.mmap)
+	if ((!executable && event->attr.mmap_data) ||
+	    (executable && event->attr.mmap))
 		return 1;
 
 	return 0;
 }
 
 static void perf_event_mmap_ctx(struct perf_event_context *ctx,
-				  struct perf_mmap_event *mmap_event)
+				  struct perf_mmap_event *mmap_event,
+				  int executable)
 {
 	struct perf_event *event;
 
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
-		if (perf_event_mmap_match(event, mmap_event))
+		if (perf_event_mmap_match(event, mmap_event, executable))
 			perf_event_mmap_output(event, mmap_event);
 	}
 }
@@ -3830,6 +3834,14 @@ static void perf_event_mmap_event(struct perf_mmap_event *mmap_event)
 		if (!vma->vm_mm) {
 			name = strncpy(tmp, "[vdso]", sizeof(tmp));
 			goto got_name;
+		} else if (vma->vm_start <= vma->vm_mm->start_brk &&
+				vma->vm_end >= vma->vm_mm->brk) {
+			name = strncpy(tmp, "[heap]", sizeof(tmp));
+			goto got_name;
+		} else if (vma->vm_start <= vma->vm_mm->start_stack &&
+				vma->vm_end >= vma->vm_mm->start_stack) {
+			name = strncpy(tmp, "[stack]", sizeof(tmp));
+			goto got_name;
 		}
 
 		name = strncpy(tmp, "//anon", sizeof(tmp));
@@ -3846,17 +3858,17 @@ got_name:
 
 	rcu_read_lock();
 	cpuctx = &get_cpu_var(perf_cpu_context);
-	perf_event_mmap_ctx(&cpuctx->ctx, mmap_event);
+	perf_event_mmap_ctx(&cpuctx->ctx, mmap_event, vma->vm_flags & VM_EXEC);
 	ctx = rcu_dereference(current->perf_event_ctxp);
 	if (ctx)
-		perf_event_mmap_ctx(ctx, mmap_event);
+		perf_event_mmap_ctx(ctx, mmap_event, vma->vm_flags & VM_EXEC);
 	put_cpu_var(perf_cpu_context);
 	rcu_read_unlock();
 
 	kfree(buf);
 }
 
-void __perf_event_mmap(struct vm_area_struct *vma)
+void perf_event_mmap(struct vm_area_struct *vma)
 {
 	struct perf_mmap_event mmap_event;
 
@@ -4018,14 +4030,14 @@ static u64 perf_swevent_set_period(struct perf_event *event)
 	hwc->last_period = hwc->sample_period;
 
 again:
-	old = val = atomic64_read(&hwc->period_left);
+	old = val = local64_read(&hwc->period_left);
 	if (val < 0)
 		return 0;
 
 	nr = div64_u64(period + val, period);
 	offset = nr * period;
 	val -= offset;
-	if (atomic64_cmpxchg(&hwc->period_left, old, val) != old)
+	if (local64_cmpxchg(&hwc->period_left, old, val) != old)
 		goto again;
 
 	return nr;
@@ -4064,7 +4076,7 @@ static void perf_swevent_add(struct perf_event *event, u64 nr,
 {
 	struct hw_perf_event *hwc = &event->hw;
 
-	atomic64_add(nr, &event->count);
+	local64_add(nr, &event->count);
 
 	if (!regs)
 		return;
@@ -4075,7 +4087,7 @@ static void perf_swevent_add(struct perf_event *event, u64 nr,
 	if (nr == 1 && hwc->sample_period == 1 && !event->attr.freq)
 		return perf_swevent_overflow(event, 1, nmi, data, regs);
 
-	if (atomic64_add_negative(nr, &hwc->period_left))
+	if (local64_add_negative(nr, &hwc->period_left))
 		return;
 
 	perf_swevent_overflow(event, 0, nmi, data, regs);
@@ -4213,14 +4225,12 @@ int perf_swevent_get_recursion_context(void)
 }
 EXPORT_SYMBOL_GPL(perf_swevent_get_recursion_context);
 
-void perf_swevent_put_recursion_context(int rctx)
+void inline perf_swevent_put_recursion_context(int rctx)
 {
 	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
 	barrier();
 	cpuctx->recursion[rctx]--;
 }
-EXPORT_SYMBOL_GPL(perf_swevent_put_recursion_context);
-
 
 void __perf_sw_event(u32 event_id, u64 nr, int nmi,
 			    struct pt_regs *regs, u64 addr)
@@ -4368,8 +4378,8 @@ static void cpu_clock_perf_event_update(struct perf_event *event)
 	u64 now;
 
 	now = cpu_clock(cpu);
-	prev = atomic64_xchg(&event->hw.prev_count, now);
-	atomic64_add(now - prev, &event->count);
+	prev = local64_xchg(&event->hw.prev_count, now);
+	local64_add(now - prev, &event->count);
 }
 
 static int cpu_clock_perf_event_enable(struct perf_event *event)
@@ -4377,7 +4387,7 @@ static int cpu_clock_perf_event_enable(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	int cpu = raw_smp_processor_id();
 
-	atomic64_set(&hwc->prev_count, cpu_clock(cpu));
+	local64_set(&hwc->prev_count, cpu_clock(cpu));
 	perf_swevent_start_hrtimer(event);
 
 	return 0;
@@ -4409,9 +4419,9 @@ static void task_clock_perf_event_update(struct perf_event *event, u64 now)
 	u64 prev;
 	s64 delta;
 
-	prev = atomic64_xchg(&event->hw.prev_count, now);
+	prev = local64_xchg(&event->hw.prev_count, now);
 	delta = now - prev;
-	atomic64_add(delta, &event->count);
+	local64_add(delta, &event->count);
 }
 
 static int task_clock_perf_event_enable(struct perf_event *event)
@@ -4421,7 +4431,7 @@ static int task_clock_perf_event_enable(struct perf_event *event)
 
 	now = event->ctx->time;
 
-	atomic64_set(&hwc->prev_count, now);
+	local64_set(&hwc->prev_count, now);
 
 	perf_swevent_start_hrtimer(event);
 
@@ -4601,7 +4611,7 @@ static int perf_tp_event_match(struct perf_event *event,
 }
 
 void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
-		   struct pt_regs *regs, struct hlist_head *head)
+		   struct pt_regs *regs, struct hlist_head *head, int rctx)
 {
 	struct perf_sample_data data;
 	struct perf_event *event;
@@ -4615,12 +4625,12 @@ void perf_tp_event(u64 addr, u64 count, void *record, int entry_size,
 	perf_sample_data_init(&data, addr);
 	data.raw = &raw;
 
-	rcu_read_lock();
 	hlist_for_each_entry_rcu(event, node, head, hlist_entry) {
 		if (perf_tp_event_match(event, &data, regs))
 			perf_swevent_add(event, count, 1, &data, regs);
 	}
-	rcu_read_unlock();
+
+	perf_swevent_put_recursion_context(rctx);
 }
 EXPORT_SYMBOL_GPL(perf_tp_event);
 
@@ -4864,7 +4874,7 @@ perf_event_alloc(struct perf_event_attr *attr,
 		hwc->sample_period = 1;
 	hwc->last_period = hwc->sample_period;
 
-	atomic64_set(&hwc->period_left, hwc->sample_period);
+	local64_set(&hwc->period_left, hwc->sample_period);
 
 	/*
 	 * we currently do not support PERF_FORMAT_GROUP on inherited events
@@ -4913,7 +4923,7 @@ done:
 
 	if (!event->parent) {
 		atomic_inc(&nr_events);
-		if (event->attr.mmap)
+		if (event->attr.mmap || event->attr.mmap_data)
 			atomic_inc(&nr_mmap_events);
 		if (event->attr.comm)
 			atomic_inc(&nr_comm_events);
@@ -5007,7 +5017,7 @@ err_size:
 static int
 perf_event_set_output(struct perf_event *event, struct perf_event *output_event)
 {
-	struct perf_mmap_data *data = NULL, *old_data = NULL;
+	struct perf_buffer *buffer = NULL, *old_buffer = NULL;
 	int ret = -EINVAL;
 
 	if (!output_event)
@@ -5037,19 +5047,19 @@ set:
 
 	if (output_event) {
 		/* get the buffer we want to redirect to */
-		data = perf_mmap_data_get(output_event);
-		if (!data)
+		buffer = perf_buffer_get(output_event);
+		if (!buffer)
 			goto unlock;
 	}
 
-	old_data = event->data;
-	rcu_assign_pointer(event->data, data);
+	old_buffer = event->buffer;
+	rcu_assign_pointer(event->buffer, buffer);
 	ret = 0;
 unlock:
 	mutex_unlock(&event->mmap_mutex);
 
-	if (old_data)
-		perf_mmap_data_put(old_data);
+	if (old_buffer)
+		perf_buffer_put(old_buffer);
 out:
 	return ret;
 }
@@ -5298,7 +5308,7 @@ inherit_event(struct perf_event *parent_event,
 		hwc->sample_period = sample_period;
 		hwc->last_period   = sample_period;
 
-		atomic64_set(&hwc->period_left, sample_period);
+		local64_set(&hwc->period_left, sample_period);
 	}
 
 	child_event->overflow_handler = parent_event->overflow_handler;
@@ -5359,12 +5369,12 @@ static void sync_child_event(struct perf_event *child_event,
 	if (child_event->attr.inherit_stat)
 		perf_event_read_event(child_event, child);
 
-	child_val = atomic64_read(&child_event->count);
+	child_val = perf_event_count(child_event);
 
 	/*
 	 * Add back the child's count to the parent's count:
 	 */
-	atomic64_add(child_val, &parent_event->count);
+	atomic64_add(child_val, &parent_event->child_count);
 	atomic64_add(child_event->total_time_enabled,
 		     &parent_event->child_total_time_enabled);
 	atomic64_add(child_event->total_time_running,
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 9829646d399..f66bdd33a6c 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -232,31 +232,24 @@ static int cpu_clock_sample(const clockid_t which_clock, struct task_struct *p,
 
 void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
 {
-	struct sighand_struct *sighand;
-	struct signal_struct *sig;
+	struct signal_struct *sig = tsk->signal;
 	struct task_struct *t;
 
-	*times = INIT_CPUTIME;
+	times->utime = sig->utime;
+	times->stime = sig->stime;
+	times->sum_exec_runtime = sig->sum_sched_runtime;
 
 	rcu_read_lock();
-	sighand = rcu_dereference(tsk->sighand);
-	if (!sighand)
+	/* make sure we can trust tsk->thread_group list */
+	if (!likely(pid_alive(tsk)))
 		goto out;
 
-	sig = tsk->signal;
-
 	t = tsk;
 	do {
 		times->utime = cputime_add(times->utime, t->utime);
 		times->stime = cputime_add(times->stime, t->stime);
 		times->sum_exec_runtime += t->se.sum_exec_runtime;
-
-		t = next_thread(t);
-	} while (t != tsk);
-
-	times->utime = cputime_add(times->utime, sig->utime);
-	times->stime = cputime_add(times->stime, sig->stime);
-	times->sum_exec_runtime += sig->sum_sched_runtime;
+	} while_each_thread(tsk, t);
 out:
 	rcu_read_unlock();
 }
@@ -1279,10 +1272,6 @@ static inline int fastpath_timer_check(struct task_struct *tsk)
 {
 	struct signal_struct *sig;
 
-	/* tsk == current, ensure it is safe to use ->signal/sighand */
-	if (unlikely(tsk->exit_state))
-		return 0;
-
 	if (!task_cputime_zero(&tsk->cputime_expires)) {
 		struct task_cputime task_sample = {
 			.utime = tsk->utime,
@@ -1298,7 +1287,10 @@ static inline int fastpath_timer_check(struct task_struct *tsk)
 	if (sig->cputimer.running) {
 		struct task_cputime group_sample;
 
-		thread_group_cputimer(tsk, &group_sample);
+		spin_lock(&sig->cputimer.lock);
+		group_sample = sig->cputimer.cputime;
+		spin_unlock(&sig->cputimer.lock);
+
 		if (task_cputime_expired(&group_sample, &sig->cputime_expires))
 			return 1;
 	}
@@ -1315,6 +1307,7 @@ void run_posix_cpu_timers(struct task_struct *tsk)
 {
 	LIST_HEAD(firing);
 	struct k_itimer *timer, *next;
+	unsigned long flags;
 
 	BUG_ON(!irqs_disabled());
 
@@ -1325,7 +1318,8 @@ void run_posix_cpu_timers(struct task_struct *tsk)
 	if (!fastpath_timer_check(tsk))
 		return;
 
-	spin_lock(&tsk->sighand->siglock);
+	if (!lock_task_sighand(tsk, &flags))
+		return;
 	/*
 	 * Here we take off tsk->signal->cpu_timers[N] and
 	 * tsk->cpu_timers[N] all the timers that are firing, and
@@ -1347,7 +1341,7 @@ void run_posix_cpu_timers(struct task_struct *tsk)
 	 * that gets the timer lock before we do will give it up and
 	 * spin until we've taken care of that timer below.
 	 */
-	spin_unlock(&tsk->sighand->siglock);
+	unlock_task_sighand(tsk, &flags);
 
 	/*
 	 * Now that all the timers on our list have the firing flag,
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index ad723420acc..9ca4973f736 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -560,11 +560,6 @@ SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
 	new_timer->it_clock = which_clock;
 	new_timer->it_overrun = -1;
 
-	if (copy_to_user(created_timer_id,
-			 &new_timer_id, sizeof (new_timer_id))) {
-		error = -EFAULT;
-		goto out;
-	}
 	if (timer_event_spec) {
 		if (copy_from_user(&event, timer_event_spec, sizeof (event))) {
 			error = -EFAULT;
@@ -590,6 +585,12 @@ SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
 	new_timer->sigq->info.si_tid   = new_timer->it_id;
 	new_timer->sigq->info.si_code  = SI_TIMER;
 
+	if (copy_to_user(created_timer_id,
+			 &new_timer_id, sizeof (new_timer_id))) {
+		error = -EFAULT;
+		goto out;
+	}
+
 	error = CLOCK_DISPATCH(which_clock, timer_create, (new_timer));
 	if (error)
 		goto out;
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 8dc31e02ae1..c77963938bc 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -338,6 +338,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
+	hibernation_freeze_swap();
 	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
 	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
diff --git a/kernel/power/process.c b/kernel/power/process.c
index 71ae29052ab..028a99598f4 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -15,6 +15,7 @@
 #include <linux/syscalls.h>
 #include <linux/freezer.h>
 #include <linux/delay.h>
+#include <linux/workqueue.h>
 
 /* 
  * Timeout for stopping processes
@@ -35,6 +36,7 @@ static int try_to_freeze_tasks(bool sig_only)
 	struct task_struct *g, *p;
 	unsigned long end_time;
 	unsigned int todo;
+	bool wq_busy = false;
 	struct timeval start, end;
 	u64 elapsed_csecs64;
 	unsigned int elapsed_csecs;
@@ -42,6 +44,10 @@ static int try_to_freeze_tasks(bool sig_only)
 	do_gettimeofday(&start);
 
 	end_time = jiffies + TIMEOUT;
+
+	if (!sig_only)
+		freeze_workqueues_begin();
+
 	while (true) {
 		todo = 0;
 		read_lock(&tasklist_lock);
@@ -63,6 +69,12 @@ static int try_to_freeze_tasks(bool sig_only)
 				todo++;
 		} while_each_thread(g, p);
 		read_unlock(&tasklist_lock);
+
+		if (!sig_only) {
+			wq_busy = freeze_workqueues_busy();
+			todo += wq_busy;
+		}
+
 		if (!todo || time_after(jiffies, end_time))
 			break;
 
@@ -86,8 +98,12 @@ static int try_to_freeze_tasks(bool sig_only)
 		 */
 		printk("\n");
 		printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds "
-				"(%d tasks refusing to freeze):\n",
-				elapsed_csecs / 100, elapsed_csecs % 100, todo);
+		       "(%d tasks refusing to freeze, wq_busy=%d):\n",
+		       elapsed_csecs / 100, elapsed_csecs % 100,
+		       todo - wq_busy, wq_busy);
+
+		thaw_workqueues();
+
 		read_lock(&tasklist_lock);
 		do_each_thread(g, p) {
 			task_lock(p);
@@ -157,6 +173,7 @@ void thaw_processes(void)
 	oom_killer_enable();
 
 	printk("Restarting tasks ... ");
+	thaw_workqueues();
 	thaw_tasks(true);
 	thaw_tasks(false);
 	schedule();
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index f6cd6faf84f..5e7edfb05e6 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1086,6 +1086,7 @@ void swsusp_free(void)
 	buffer = NULL;
 	alloc_normal = 0;
 	alloc_highmem = 0;
+	hibernation_thaw_swap();
 }
 
 /* Helper functions used for the shrinking of memory. */
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index e6a5bdf61a3..5d0059eed3e 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -136,10 +136,10 @@ sector_t alloc_swapdev_block(int swap)
 {
 	unsigned long offset;
 
-	offset = swp_offset(get_swap_page_of_type(swap));
+	offset = swp_offset(get_swap_for_hibernation(swap));
 	if (offset) {
 		if (swsusp_extents_insert(offset))
-			swap_free(swp_entry(swap, offset));
+			swap_free_for_hibernation(swp_entry(swap, offset));
 		else
 			return swapdev_block(swap, offset);
 	}
@@ -163,7 +163,7 @@ void free_all_swap_pages(int swap)
 		ext = container_of(node, struct swsusp_extent, node);
 		rb_erase(node, &swsusp_extents);
 		for (offset = ext->start; offset <= ext->end; offset++)
-			swap_free(swp_entry(swap, offset));
+			swap_free_for_hibernation(swp_entry(swap, offset));
 
 		kfree(ext);
 	}
diff --git a/kernel/printk.c b/kernel/printk.c
index 444b770c959..8fe465ac008 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -37,6 +37,8 @@
 #include <linux/ratelimit.h>
 #include <linux/kmsg_dump.h>
 #include <linux/syslog.h>
+#include <linux/cpu.h>
+#include <linux/notifier.h>
 
 #include <asm/uaccess.h>
 
@@ -985,6 +987,32 @@ void resume_console(void)
 }
 
 /**
+ * console_cpu_notify - print deferred console messages after CPU hotplug
+ * @self: notifier struct
+ * @action: CPU hotplug event
+ * @hcpu: unused
+ *
+ * If printk() is called from a CPU that is not online yet, the messages
+ * will be spooled but will not show up on the console.  This function is
+ * called when a new CPU comes online (or fails to come up), and ensures
+ * that any such output gets printed.
+ */
+static int __cpuinit console_cpu_notify(struct notifier_block *self,
+	unsigned long action, void *hcpu)
+{
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_DEAD:
+	case CPU_DYING:
+	case CPU_DOWN_FAILED:
+	case CPU_UP_CANCELED:
+		acquire_console_sem();
+		release_console_sem();
+	}
+	return NOTIFY_OK;
+}
+
+/**
  * acquire_console_sem - lock the console system for exclusive use.
  *
  * Acquires a semaphore which guarantees that the caller has
@@ -1371,7 +1399,7 @@ int unregister_console(struct console *console)
 }
 EXPORT_SYMBOL(unregister_console);
 
-static int __init disable_boot_consoles(void)
+static int __init printk_late_init(void)
 {
 	struct console *con;
 
@@ -1382,9 +1410,10 @@ static int __init disable_boot_consoles(void)
 			unregister_console(con);
 		}
 	}
+	hotcpu_notifier(console_cpu_notify, 0);
 	return 0;
 }
-late_initcall(disable_boot_consoles);
+late_initcall(printk_late_init);
 
 #if defined CONFIG_PRINTK
 
@@ -1520,9 +1549,9 @@ void kmsg_dump(enum kmsg_dump_reason reason)
 	chars = logged_chars;
 	spin_unlock_irqrestore(&logbuf_lock, flags);
 
-	if (logged_chars > end) {
-		s1 = log_buf + log_buf_len - logged_chars + end;
-		l1 = logged_chars - end;
+	if (chars > end) {
+		s1 = log_buf + log_buf_len - chars + end;
+		l1 = chars - end;
 
 		s2 = log_buf;
 		l2 = end;
@@ -1530,8 +1559,8 @@ void kmsg_dump(enum kmsg_dump_reason reason)
 		s1 = "";
 		l1 = 0;
 
-		s2 = log_buf + end - logged_chars;
-		l2 = logged_chars;
+		s2 = log_buf + end - chars;
+		l2 = chars;
 	}
 
 	if (!spin_trylock_irqsave(&dump_list_lock, flags)) {
diff --git a/kernel/range.c b/kernel/range.c
index 74e2e611492..471b66acabb 100644
--- a/kernel/range.c
+++ b/kernel/range.c
@@ -7,10 +7,6 @@
 
 #include <linux/range.h>
 
-#ifndef ARRAY_SIZE
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
-
 int add_range(struct range *range, int az, int nr_range, u64 start, u64 end)
 {
 	if (start >= end)
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 72a8dc9567f..4d169835fb3 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -114,3 +114,163 @@ int rcu_my_thread_group_empty(void)
 }
 EXPORT_SYMBOL_GPL(rcu_my_thread_group_empty);
 #endif /* #ifdef CONFIG_PROVE_RCU */
+
+#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
+static inline void debug_init_rcu_head(struct rcu_head *head)
+{
+	debug_object_init(head, &rcuhead_debug_descr);
+}
+
+static inline void debug_rcu_head_free(struct rcu_head *head)
+{
+	debug_object_free(head, &rcuhead_debug_descr);
+}
+
+/*
+ * fixup_init is called when:
+ * - an active object is initialized
+ */
+static int rcuhead_fixup_init(void *addr, enum debug_obj_state state)
+{
+	struct rcu_head *head = addr;
+
+	switch (state) {
+	case ODEBUG_STATE_ACTIVE:
+		/*
+		 * Ensure that queued callbacks are all executed.
+		 * If we detect that we are nested in a RCU read-side critical
+		 * section, we should simply fail, otherwise we would deadlock.
+		 */
+		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
+		    irqs_disabled()) {
+			WARN_ON(1);
+			return 0;
+		}
+		rcu_barrier();
+		rcu_barrier_sched();
+		rcu_barrier_bh();
+		debug_object_init(head, &rcuhead_debug_descr);
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * fixup_activate is called when:
+ * - an active object is activated
+ * - an unknown object is activated (might be a statically initialized object)
+ * Activation is performed internally by call_rcu().
+ */
+static int rcuhead_fixup_activate(void *addr, enum debug_obj_state state)
+{
+	struct rcu_head *head = addr;
+
+	switch (state) {
+
+	case ODEBUG_STATE_NOTAVAILABLE:
+		/*
+		 * This is not really a fixup. We just make sure that it is
+		 * tracked in the object tracker.
+		 */
+		debug_object_init(head, &rcuhead_debug_descr);
+		debug_object_activate(head, &rcuhead_debug_descr);
+		return 0;
+
+	case ODEBUG_STATE_ACTIVE:
+		/*
+		 * Ensure that queued callbacks are all executed.
+		 * If we detect that we are nested in a RCU read-side critical
+		 * section, we should simply fail, otherwise we would deadlock.
+		 */
+		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
+		    irqs_disabled()) {
+			WARN_ON(1);
+			return 0;
+		}
+		rcu_barrier();
+		rcu_barrier_sched();
+		rcu_barrier_bh();
+		debug_object_activate(head, &rcuhead_debug_descr);
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * fixup_free is called when:
+ * - an active object is freed
+ */
+static int rcuhead_fixup_free(void *addr, enum debug_obj_state state)
+{
+	struct rcu_head *head = addr;
+
+	switch (state) {
+	case ODEBUG_STATE_ACTIVE:
+		/*
+		 * Ensure that queued callbacks are all executed.
+		 * If we detect that we are nested in a RCU read-side critical
+		 * section, we should simply fail, otherwise we would deadlock.
+		 */
+#ifndef CONFIG_PREEMPT
+		WARN_ON(1);
+		return 0;
+#else
+		if (rcu_preempt_depth() != 0 || preempt_count() != 0 ||
+		    irqs_disabled()) {
+			WARN_ON(1);
+			return 0;
+		}
+		rcu_barrier();
+		rcu_barrier_sched();
+		rcu_barrier_bh();
+		debug_object_free(head, &rcuhead_debug_descr);
+		return 1;
+#endif
+	default:
+		return 0;
+	}
+}
+
+/**
+ * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
+ * @head: pointer to rcu_head structure to be initialized
+ *
+ * This function informs debugobjects of a new rcu_head structure that
+ * has been allocated as an auto variable on the stack.  This function
+ * is not required for rcu_head structures that are statically defined or
+ * that are dynamically allocated on the heap.  This function has no
+ * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
+ */
+void init_rcu_head_on_stack(struct rcu_head *head)
+{
+	debug_object_init_on_stack(head, &rcuhead_debug_descr);
+}
+EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);
+
+/**
+ * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
+ * @head: pointer to rcu_head structure to be initialized
+ *
+ * This function informs debugobjects that an on-stack rcu_head structure
+ * is about to go out of scope.  As with init_rcu_head_on_stack(), this
+ * function is not required for rcu_head structures that are statically
+ * defined or that are dynamically allocated on the heap.  Also as with
+ * init_rcu_head_on_stack(), this function has no effect for
+ * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
+ */
+void destroy_rcu_head_on_stack(struct rcu_head *head)
+{
+	debug_object_free(head, &rcuhead_debug_descr);
+}
+EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);
+
+struct debug_obj_descr rcuhead_debug_descr = {
+	.name = "rcu_head",
+	.fixup_init = rcuhead_fixup_init,
+	.fixup_activate = rcuhead_fixup_activate,
+	.fixup_free = rcuhead_fixup_free,
+};
+EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
+#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index 38729d3cd23..196ec02f8be 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -169,6 +169,7 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 	while (list) {
 		next = list->next;
 		prefetch(next);
+		debug_rcu_head_unqueue(list);
 		list->func(list);
 		list = next;
 	}
@@ -211,6 +212,7 @@ static void __call_rcu(struct rcu_head *head,
 {
 	unsigned long flags;
 
+	debug_rcu_head_queue(head);
 	head->func = func;
 	head->next = NULL;
 
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 6535ac8bc6a..2e2726d790b 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -239,8 +239,7 @@ static unsigned long
 rcu_random(struct rcu_random_state *rrsp)
 {
 	if (--rrsp->rrs_count < 0) {
-		rrsp->rrs_state +=
-			(unsigned long)cpu_clock(raw_smp_processor_id());
+		rrsp->rrs_state += (unsigned long)local_clock();
 		rrsp->rrs_count = RCU_RANDOM_REFRESH;
 	}
 	rrsp->rrs_state = rrsp->rrs_state * RCU_RANDOM_MULT + RCU_RANDOM_ADD;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index d4437345706..d5bc43976c5 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1112,6 +1112,7 @@ static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
 	while (list) {
 		next = list->next;
 		prefetch(next);
+		debug_rcu_head_unqueue(list);
 		list->func(list);
 		list = next;
 		if (++count >= rdp->blimit)
@@ -1388,6 +1389,7 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	unsigned long flags;
 	struct rcu_data *rdp;
 
+	debug_rcu_head_queue(head);
 	head->func = func;
 	head->next = NULL;
 
diff --git a/kernel/sched.c b/kernel/sched.c
index f52a8801b7a..41541d79e3c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -77,6 +77,7 @@
 #include <asm/irq_regs.h>
 
 #include "sched_cpupri.h"
+#include "workqueue_sched.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/sched.h>
@@ -456,9 +457,10 @@ struct rq {
 	unsigned long nr_running;
 	#define CPU_LOAD_IDX_MAX 5
 	unsigned long cpu_load[CPU_LOAD_IDX_MAX];
+	unsigned long last_load_update_tick;
 #ifdef CONFIG_NO_HZ
 	u64 nohz_stamp;
-	unsigned char in_nohz_recently;
+	unsigned char nohz_balance_kick;
 #endif
 	unsigned int skip_clock_update;
 
@@ -1193,6 +1195,27 @@ static void resched_cpu(int cpu)
 
 #ifdef CONFIG_NO_HZ
 /*
+ * In the semi idle case, use the nearest busy cpu for migrating timers
+ * from an idle cpu.  This is good for power-savings.
+ *
+ * We don't do similar optimization for completely idle system, as
+ * selecting an idle cpu will add more delays to the timers than intended
+ * (as that cpu's timer base may not be uptodate wrt jiffies etc).
+ */
+int get_nohz_timer_target(void)
+{
+	int cpu = smp_processor_id();
+	int i;
+	struct sched_domain *sd;
+
+	for_each_domain(cpu, sd) {
+		for_each_cpu(i, sched_domain_span(sd))
+			if (!idle_cpu(i))
+				return i;
+	}
+	return cpu;
+}
+/*
  * When add_timer_on() enqueues a timer into the timer wheel of an
  * idle CPU then this timer might expire before the next timer event
  * which is scheduled to wake up that CPU. In case of a completely
@@ -1232,16 +1255,6 @@ void wake_up_idle_cpu(int cpu)
 		smp_send_reschedule(cpu);
 }
 
-int nohz_ratelimit(int cpu)
-{
-	struct rq *rq = cpu_rq(cpu);
-	u64 diff = rq->clock - rq->nohz_stamp;
-
-	rq->nohz_stamp = rq->clock;
-
-	return diff < (NSEC_PER_SEC / HZ) >> 1;
-}
-
 #endif /* CONFIG_NO_HZ */
 
 static u64 sched_avg_period(void)
@@ -1652,7 +1665,7 @@ static void update_shares(struct sched_domain *sd)
 	if (root_task_group_empty())
 		return;
 
-	now = cpu_clock(raw_smp_processor_id());
+	now = local_clock();
 	elapsed = now - sd->last_update;
 
 	if (elapsed >= (s64)(u64)sysctl_sched_shares_ratelimit) {
@@ -1805,6 +1818,7 @@ static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
 static void calc_load_account_idle(struct rq *this_rq);
 static void update_sysctl(void);
 static int get_update_sysctl_factor(void);
+static void update_cpu_load(struct rq *this_rq);
 
 static inline void __set_task_cpu(struct task_struct *p, unsigned int cpu)
 {
@@ -2267,11 +2281,55 @@ static void update_avg(u64 *avg, u64 sample)
 }
 #endif
 
-/***
+static inline void ttwu_activate(struct task_struct *p, struct rq *rq,
+				 bool is_sync, bool is_migrate, bool is_local,
+				 unsigned long en_flags)
+{
+	schedstat_inc(p, se.statistics.nr_wakeups);
+	if (is_sync)
+		schedstat_inc(p, se.statistics.nr_wakeups_sync);
+	if (is_migrate)
+		schedstat_inc(p, se.statistics.nr_wakeups_migrate);
+	if (is_local)
+		schedstat_inc(p, se.statistics.nr_wakeups_local);
+	else
+		schedstat_inc(p, se.statistics.nr_wakeups_remote);
+
+	activate_task(rq, p, en_flags);
+}
+
+static inline void ttwu_post_activation(struct task_struct *p, struct rq *rq,
+					int wake_flags, bool success)
+{
+	trace_sched_wakeup(p, success);
+	check_preempt_curr(rq, p, wake_flags);
+
+	p->state = TASK_RUNNING;
+#ifdef CONFIG_SMP
+	if (p->sched_class->task_woken)
+		p->sched_class->task_woken(rq, p);
+
+	if (unlikely(rq->idle_stamp)) {
+		u64 delta = rq->clock - rq->idle_stamp;
+		u64 max = 2*sysctl_sched_migration_cost;
+
+		if (delta > max)
+			rq->avg_idle = max;
+		else
+			update_avg(&rq->avg_idle, delta);
+		rq->idle_stamp = 0;
+	}
+#endif
+	/* if a worker is waking up, notify workqueue */
+	if ((p->flags & PF_WQ_WORKER) && success)
+		wq_worker_waking_up(p, cpu_of(rq));
+}
+
+/**
  * try_to_wake_up - wake up a thread
- * @p: the to-be-woken-up thread
+ * @p: the thread to be awakened
  * @state: the mask of task states that can be woken
- * @sync: do a synchronous wakeup?
+ * @wake_flags: wake modifier flags (WF_*)
  *
  * Put it on the run-queue if it's not already there. The "current"
  * thread is always on the run-queue (except when the actual
@@ -2279,7 +2337,8 @@ static void update_avg(u64 *avg, u64 sample)
  * the simpler "current->state = TASK_RUNNING" to mark yourself
  * runnable without the overhead of this.
  *
- * returns failure only if the task is already active.
+ * Returns %true if @p was woken up, %false if it was already running
+ * or @state didn't match @p's state.
  */
 static int try_to_wake_up(struct task_struct *p, unsigned int state,
 			  int wake_flags)
@@ -2359,38 +2418,11 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state,
 
 out_activate:
 #endif /* CONFIG_SMP */
-	schedstat_inc(p, se.statistics.nr_wakeups);
-	if (wake_flags & WF_SYNC)
-		schedstat_inc(p, se.statistics.nr_wakeups_sync);
-	if (orig_cpu != cpu)
-		schedstat_inc(p, se.statistics.nr_wakeups_migrate);
-	if (cpu == this_cpu)
-		schedstat_inc(p, se.statistics.nr_wakeups_local);
-	else
-		schedstat_inc(p, se.statistics.nr_wakeups_remote);
-	activate_task(rq, p, en_flags);
+	ttwu_activate(p, rq, wake_flags & WF_SYNC, orig_cpu != cpu,
+		      cpu == this_cpu, en_flags);
 	success = 1;
-
 out_running:
-	trace_sched_wakeup(p, success);
-	check_preempt_curr(rq, p, wake_flags);
-
-	p->state = TASK_RUNNING;
-#ifdef CONFIG_SMP
-	if (p->sched_class->task_woken)
-		p->sched_class->task_woken(rq, p);
-
-	if (unlikely(rq->idle_stamp)) {
-		u64 delta = rq->clock - rq->idle_stamp;
-		u64 max = 2*sysctl_sched_migration_cost;
-
-		if (delta > max)
-			rq->avg_idle = max;
-		else
-			update_avg(&rq->avg_idle, delta);
-		rq->idle_stamp = 0;
-	}
-#endif
+	ttwu_post_activation(p, rq, wake_flags, success);
 out:
 	task_rq_unlock(rq, &flags);
 	put_cpu();
@@ -2399,6 +2431,37 @@ out:
 }
 
 /**
+ * try_to_wake_up_local - try to wake up a local task with rq lock held
+ * @p: the thread to be awakened
+ *
+ * Put @p on the run-queue if it's not alredy there.  The caller must
+ * ensure that this_rq() is locked, @p is bound to this_rq() and not
+ * the current task.  this_rq() stays locked over invocation.
+ */
+static void try_to_wake_up_local(struct task_struct *p)
+{
+	struct rq *rq = task_rq(p);
+	bool success = false;
+
+	BUG_ON(rq != this_rq());
+	BUG_ON(p == current);
+	lockdep_assert_held(&rq->lock);
+
+	if (!(p->state & TASK_NORMAL))
+		return;
+
+	if (!p->se.on_rq) {
+		if (likely(!task_running(rq, p))) {
+			schedstat_inc(rq, ttwu_count);
+			schedstat_inc(rq, ttwu_local);
+		}
+		ttwu_activate(p, rq, false, false, true, ENQUEUE_WAKEUP);
+		success = true;
+	}
+	ttwu_post_activation(p, rq, 0, success);
+}
+
+/**
  * wake_up_process - Wake up a specific process
  * @p: The process to be woken up.
  *
@@ -3012,23 +3075,102 @@ static void calc_load_account_active(struct rq *this_rq)
 }
 
 /*
+ * The exact cpuload at various idx values, calculated at every tick would be
+ * load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
+ *
+ * If a cpu misses updates for n-1 ticks (as it was idle) and update gets called
+ * on nth tick when cpu may be busy, then we have:
+ * load = ((2^idx - 1) / 2^idx)^(n-1) * load
+ * load = (2^idx - 1) / 2^idx) * load + 1 / 2^idx * cur_load
+ *
+ * decay_load_missed() below does efficient calculation of
+ * load = ((2^idx - 1) / 2^idx)^(n-1) * load
+ * avoiding 0..n-1 loop doing load = ((2^idx - 1) / 2^idx) * load
+ *
+ * The calculation is approximated on a 128 point scale.
+ * degrade_zero_ticks is the number of ticks after which load at any
+ * particular idx is approximated to be zero.
+ * degrade_factor is a precomputed table, a row for each load idx.
+ * Each column corresponds to degradation factor for a power of two ticks,
+ * based on 128 point scale.
+ * Example:
+ * row 2, col 3 (=12) says that the degradation at load idx 2 after
+ * 8 ticks is 12/128 (which is an approximation of exact factor 3^8/4^8).
+ *
+ * With this power of 2 load factors, we can degrade the load n times
+ * by looking at 1 bits in n and doing as many mult/shift instead of
+ * n mult/shifts needed by the exact degradation.
+ */
+#define DEGRADE_SHIFT		7
+static const unsigned char
+		degrade_zero_ticks[CPU_LOAD_IDX_MAX] = {0, 8, 32, 64, 128};
+static const unsigned char
+		degrade_factor[CPU_LOAD_IDX_MAX][DEGRADE_SHIFT + 1] = {
+					{0, 0, 0, 0, 0, 0, 0, 0},
+					{64, 32, 8, 0, 0, 0, 0, 0},
+					{96, 72, 40, 12, 1, 0, 0},
+					{112, 98, 75, 43, 15, 1, 0},
+					{120, 112, 98, 76, 45, 16, 2} };
+
+/*
+ * Update cpu_load for any missed ticks, due to tickless idle. The backlog
+ * would be when CPU is idle and so we just decay the old load without
+ * adding any new load.
+ */
+static unsigned long
+decay_load_missed(unsigned long load, unsigned long missed_updates, int idx)
+{
+	int j = 0;
+
+	if (!missed_updates)
+		return load;
+
+	if (missed_updates >= degrade_zero_ticks[idx])
+		return 0;
+
+	if (idx == 1)
+		return load >> missed_updates;
+
+	while (missed_updates) {
+		if (missed_updates % 2)
+			load = (load * degrade_factor[idx][j]) >> DEGRADE_SHIFT;
+
+		missed_updates >>= 1;
+		j++;
+	}
+	return load;
+}
+
+/*
  * Update rq->cpu_load[] statistics. This function is usually called every
- * scheduler tick (TICK_NSEC).
+ * scheduler tick (TICK_NSEC). With tickless idle this will not be called
+ * every tick. We fix it up based on jiffies.
  */
 static void update_cpu_load(struct rq *this_rq)
 {
 	unsigned long this_load = this_rq->load.weight;
+	unsigned long curr_jiffies = jiffies;
+	unsigned long pending_updates;
 	int i, scale;
 
 	this_rq->nr_load_updates++;
 
+	/* Avoid repeated calls on same jiffy, when moving in and out of idle */
+	if (curr_jiffies == this_rq->last_load_update_tick)
+		return;
+
+	pending_updates = curr_jiffies - this_rq->last_load_update_tick;
+	this_rq->last_load_update_tick = curr_jiffies;
+
 	/* Update our load: */
-	for (i = 0, scale = 1; i < CPU_LOAD_IDX_MAX; i++, scale += scale) {
+	this_rq->cpu_load[0] = this_load; /* Fasttrack for idx 0 */
+	for (i = 1, scale = 2; i < CPU_LOAD_IDX_MAX; i++, scale += scale) {
 		unsigned long old_load, new_load;
 
 		/* scale is effectively 1 << i now, and >> i divides by scale */
 
 		old_load = this_rq->cpu_load[i];
+		old_load = decay_load_missed(old_load, pending_updates - 1, i);
 		new_load = this_load;
 		/*
 		 * Round up the averaging division if load is increasing. This
@@ -3036,9 +3178,15 @@ static void update_cpu_load(struct rq *this_rq)
 		 * example.
 		 */
 		if (new_load > old_load)
-			new_load += scale-1;
-		this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) >> i;
+			new_load += scale - 1;
+
+		this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i;
 	}
+}
+
+static void update_cpu_load_active(struct rq *this_rq)
+{
+	update_cpu_load(this_rq);
 
 	calc_load_account_active(this_rq);
 }
@@ -3426,7 +3574,7 @@ void scheduler_tick(void)
 
 	raw_spin_lock(&rq->lock);
 	update_rq_clock(rq);
-	update_cpu_load(rq);
+	update_cpu_load_active(rq);
 	curr->sched_class->task_tick(rq, curr, 0);
 	raw_spin_unlock(&rq->lock);
 
@@ -3598,7 +3746,6 @@ need_resched:
 	rq = cpu_rq(cpu);
 	rcu_note_context_switch(cpu);
 	prev = rq->curr;
-	switch_count = &prev->nivcsw;
 
 	release_kernel_lock(prev);
 need_resched_nonpreemptible:
@@ -3611,11 +3758,26 @@ need_resched_nonpreemptible:
 	raw_spin_lock_irq(&rq->lock);
 	clear_tsk_need_resched(prev);
 
+	switch_count = &prev->nivcsw;
 	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
-		if (unlikely(signal_pending_state(prev->state, prev)))
+		if (unlikely(signal_pending_state(prev->state, prev))) {
 			prev->state = TASK_RUNNING;
-		else
+		} else {
+			/*
+			 * If a worker is going to sleep, notify and
+			 * ask workqueue whether it wants to wake up a
+			 * task to maintain concurrency.  If so, wake
+			 * up the task.
+			 */
+			if (prev->flags & PF_WQ_WORKER) {
+				struct task_struct *to_wakeup;
+
+				to_wakeup = wq_worker_sleeping(prev, cpu);
+				if (to_wakeup)
+					try_to_wake_up_local(to_wakeup);
+			}
 			deactivate_task(rq, prev, DEQUEUE_SLEEP);
+		}
 		switch_count = &prev->nvcsw;
 	}
 
@@ -3637,8 +3799,10 @@ need_resched_nonpreemptible:
 
 		context_switch(rq, prev, next); /* unlocks the rq */
 		/*
-		 * the context switch might have flipped the stack from under
-		 * us, hence refresh the local variables.
+		 * The context switch have flipped the stack from under us
+		 * and restored the local variables which were saved when
+		 * this task called schedule() in the past. prev == current
+		 * is still correct, but it can be moved to another cpu/rq.
 		 */
 		cpu = smp_processor_id();
 		rq = cpu_rq(cpu);
@@ -3647,11 +3811,8 @@ need_resched_nonpreemptible:
 
 	post_schedule(rq);
 
-	if (unlikely(reacquire_kernel_lock(current) < 0)) {
-		prev = rq->curr;
-		switch_count = &prev->nivcsw;
+	if (unlikely(reacquire_kernel_lock(prev)))
 		goto need_resched_nonpreemptible;
-	}
 
 	preempt_enable_no_resched();
 	if (need_resched())
@@ -3726,7 +3887,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
  * off of preempt_enable. Kernel preemptions off return from interrupt
  * occur there and call schedule directly.
  */
-asmlinkage void __sched preempt_schedule(void)
+asmlinkage void __sched notrace preempt_schedule(void)
 {
 	struct thread_info *ti = current_thread_info();
 
@@ -3738,9 +3899,9 @@ asmlinkage void __sched preempt_schedule(void)
 		return;
 
 	do {
-		add_preempt_count(PREEMPT_ACTIVE);
+		add_preempt_count_notrace(PREEMPT_ACTIVE);
 		schedule();
-		sub_preempt_count(PREEMPT_ACTIVE);
+		sub_preempt_count_notrace(PREEMPT_ACTIVE);
 
 		/*
 		 * Check again in case we missed a preemption opportunity
@@ -4441,12 +4602,8 @@ recheck:
 	 */
 	if (user && !capable(CAP_SYS_NICE)) {
 		if (rt_policy(policy)) {
-			unsigned long rlim_rtprio;
-
-			if (!lock_task_sighand(p, &flags))
-				return -ESRCH;
-			rlim_rtprio = task_rlimit(p, RLIMIT_RTPRIO);
-			unlock_task_sighand(p, &flags);
+			unsigned long rlim_rtprio =
+					task_rlimit(p, RLIMIT_RTPRIO);
 
 			/* can't set/change the rt policy */
 			if (policy != p->policy && !rlim_rtprio)
@@ -5816,20 +5973,49 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
  */
 static struct notifier_block __cpuinitdata migration_notifier = {
 	.notifier_call = migration_call,
-	.priority = 10
+	.priority = CPU_PRI_MIGRATION,
 };
 
+static int __cpuinit sched_cpu_active(struct notifier_block *nfb,
+				      unsigned long action, void *hcpu)
+{
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		set_cpu_active((long)hcpu, true);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static int __cpuinit sched_cpu_inactive(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_DOWN_PREPARE:
+		set_cpu_active((long)hcpu, false);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
 static int __init migration_init(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err;
 
-	/* Start one for the boot CPU: */
+	/* Initialize migration for the boot CPU */
 	err = migration_call(&migration_notifier, CPU_UP_PREPARE, cpu);
 	BUG_ON(err == NOTIFY_BAD);
 	migration_call(&migration_notifier, CPU_ONLINE, cpu);
 	register_cpu_notifier(&migration_notifier);
 
+	/* Register cpu active notifiers */
+	cpu_notifier(sched_cpu_active, CPU_PRI_SCHED_ACTIVE);
+	cpu_notifier(sched_cpu_inactive, CPU_PRI_SCHED_INACTIVE);
+
 	return 0;
 }
 early_initcall(migration_init);
@@ -6064,23 +6250,18 @@ static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 		free_rootdomain(old_rd);
 }
 
-static int init_rootdomain(struct root_domain *rd, bool bootmem)
+static int init_rootdomain(struct root_domain *rd)
 {
-	gfp_t gfp = GFP_KERNEL;
-
 	memset(rd, 0, sizeof(*rd));
 
-	if (bootmem)
-		gfp = GFP_NOWAIT;
-
-	if (!alloc_cpumask_var(&rd->span, gfp))
+	if (!alloc_cpumask_var(&rd->span, GFP_KERNEL))
 		goto out;
-	if (!alloc_cpumask_var(&rd->online, gfp))
+	if (!alloc_cpumask_var(&rd->online, GFP_KERNEL))
 		goto free_span;
-	if (!alloc_cpumask_var(&rd->rto_mask, gfp))
+	if (!alloc_cpumask_var(&rd->rto_mask, GFP_KERNEL))
 		goto free_online;
 
-	if (cpupri_init(&rd->cpupri, bootmem) != 0)
+	if (cpupri_init(&rd->cpupri) != 0)
 		goto free_rto_mask;
 	return 0;
 
@@ -6096,7 +6277,7 @@ out:
 
 static void init_defrootdomain(void)
 {
-	init_rootdomain(&def_root_domain, true);
+	init_rootdomain(&def_root_domain);
 
 	atomic_set(&def_root_domain.refcount, 1);
 }
@@ -6109,7 +6290,7 @@ static struct root_domain *alloc_rootdomain(void)
 	if (!rd)
 		return NULL;
 
-	if (init_rootdomain(rd, false) != 0) {
+	if (init_rootdomain(rd) != 0) {
 		kfree(rd);
 		return NULL;
 	}
@@ -7288,29 +7469,35 @@ int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls)
 }
 #endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
 
-#ifndef CONFIG_CPUSETS
 /*
- * Add online and remove offline CPUs from the scheduler domains.
- * When cpusets are enabled they take over this function.
+ * Update cpusets according to cpu_active mask.  If cpusets are
+ * disabled, cpuset_update_active_cpus() becomes a simple wrapper
+ * around partition_sched_domains().
  */
-static int update_sched_domains(struct notifier_block *nfb,
-				unsigned long action, void *hcpu)
+static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
+			     void *hcpu)
 {
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
 	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
-		partition_sched_domains(1, NULL, NULL);
+		cpuset_update_active_cpus();
 		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
 
+static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
+			       void *hcpu)
+{
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_DOWN_PREPARE:
+		cpuset_update_active_cpus();
+		return NOTIFY_OK;
 	default:
 		return NOTIFY_DONE;
 	}
 }
-#endif
 
 static int update_runtime(struct notifier_block *nfb,
 				unsigned long action, void *hcpu)
@@ -7356,10 +7543,8 @@ void __init sched_init_smp(void)
 	mutex_unlock(&sched_domains_mutex);
 	put_online_cpus();
 
-#ifndef CONFIG_CPUSETS
-	/* XXX: Theoretical race here - CPU may be hotplugged now */
-	hotcpu_notifier(update_sched_domains, 0);
-#endif
+	hotcpu_notifier(cpuset_cpu_active, CPU_PRI_CPUSET_ACTIVE);
+	hotcpu_notifier(cpuset_cpu_inactive, CPU_PRI_CPUSET_INACTIVE);
 
 	/* RT runtime code needs to handle some hotplug events */
 	hotcpu_notifier(update_runtime, 0);
@@ -7604,6 +7789,9 @@ void __init sched_init(void)
 
 		for (j = 0; j < CPU_LOAD_IDX_MAX; j++)
 			rq->cpu_load[j] = 0;
+
+		rq->last_load_update_tick = jiffies;
+
 #ifdef CONFIG_SMP
 		rq->sd = NULL;
 		rq->rd = NULL;
@@ -7617,6 +7805,10 @@ void __init sched_init(void)
 		rq->idle_stamp = 0;
 		rq->avg_idle = 2*sysctl_sched_migration_cost;
 		rq_attach_root(rq, &def_root_domain);
+#ifdef CONFIG_NO_HZ
+		rq->nohz_balance_kick = 0;
+		init_sched_softirq_csd(&per_cpu(remote_sched_softirq_cb, i));
+#endif
 #endif
 		init_rq_hrtick(rq);
 		atomic_set(&rq->nr_iowait, 0);
@@ -7661,8 +7853,11 @@ void __init sched_init(void)
 	zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
 #ifdef CONFIG_SMP
 #ifdef CONFIG_NO_HZ
-	zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
-	alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
+	zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT);
+	alloc_cpumask_var(&nohz.grp_idle_mask, GFP_NOWAIT);
+	atomic_set(&nohz.load_balancer, nr_cpu_ids);
+	atomic_set(&nohz.first_pick_cpu, nr_cpu_ids);
+	atomic_set(&nohz.second_pick_cpu, nr_cpu_ids);
 #endif
 	/* May be allocated at isolcpus cmdline parse time */
 	if (cpu_isolated_map == NULL)
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 906a0f718cb..52f1a149bfb 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -10,19 +10,55 @@
  *   Ingo Molnar <mingo@redhat.com>
  *   Guillaume Chazarain <guichaz@gmail.com>
  *
- * Create a semi stable clock from a mixture of other events, including:
- *  - gtod
+ *
+ * What:
+ *
+ * cpu_clock(i) provides a fast (execution time) high resolution
+ * clock with bounded drift between CPUs. The value of cpu_clock(i)
+ * is monotonic for constant i. The timestamp returned is in nanoseconds.
+ *
+ * ######################### BIG FAT WARNING ##########################
+ * # when comparing cpu_clock(i) to cpu_clock(j) for i != j, time can #
+ * # go backwards !!                                                  #
+ * ####################################################################
+ *
+ * There is no strict promise about the base, although it tends to start
+ * at 0 on boot (but people really shouldn't rely on that).
+ *
+ * cpu_clock(i)       -- can be used from any context, including NMI.
+ * sched_clock_cpu(i) -- must be used with local IRQs disabled (implied by NMI)
+ * local_clock()      -- is cpu_clock() on the current cpu.
+ *
+ * How:
+ *
+ * The implementation either uses sched_clock() when
+ * !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK, which means in that case the
+ * sched_clock() is assumed to provide these properties (mostly it means
+ * the architecture provides a globally synchronized highres time source).
+ *
+ * Otherwise it tries to create a semi stable clock from a mixture of other
+ * clocks, including:
+ *
+ *  - GTOD (clock monotomic)
  *  - sched_clock()
  *  - explicit idle events
  *
- * We use gtod as base and the unstable clock deltas. The deltas are filtered,
- * making it monotonic and keeping it within an expected window.
+ * We use GTOD as base and use sched_clock() deltas to improve resolution. The
+ * deltas are filtered to provide monotonicity and keeping it within an
+ * expected window.
  *
  * Furthermore, explicit sleep and wakeup hooks allow us to account for time
  * that is otherwise invisible (TSC gets stopped).
  *
- * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
- * consistent between cpus (never more than 2 jiffies difference).
+ *
+ * Notes:
+ *
+ * The !IRQ-safetly of sched_clock() and sched_clock_cpu() comes from things
+ * like cpufreq interrupts that can change the base clock (TSC) multiplier
+ * and cause funny jumps in time -- although the filtering provided by
+ * sched_clock_cpu() should mitigate serious artifacts we cannot rely on it
+ * in general since for !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK we fully rely on
+ * sched_clock().
  */
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
@@ -170,6 +206,11 @@ again:
 	return val;
 }
 
+/*
+ * Similar to cpu_clock(), but requires local IRQs to be disabled.
+ *
+ * See cpu_clock().
+ */
 u64 sched_clock_cpu(int cpu)
 {
 	struct sched_clock_data *scd;
@@ -237,9 +278,19 @@ void sched_clock_idle_wakeup_event(u64 delta_ns)
 }
 EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
 
-unsigned long long cpu_clock(int cpu)
+/*
+ * As outlined at the top, provides a fast, high resolution, nanosecond
+ * time source that is monotonic per cpu argument and has bounded drift
+ * between cpus.
+ *
+ * ######################### BIG FAT WARNING ##########################
+ * # when comparing cpu_clock(i) to cpu_clock(j) for i != j, time can #
+ * # go backwards !!                                                  #
+ * ####################################################################
+ */
+u64 cpu_clock(int cpu)
 {
-	unsigned long long clock;
+	u64 clock;
 	unsigned long flags;
 
 	local_irq_save(flags);
@@ -249,6 +300,25 @@ unsigned long long cpu_clock(int cpu)
 	return clock;
 }
 
+/*
+ * Similar to cpu_clock() for the current cpu. Time will only be observed
+ * to be monotonic if care is taken to only compare timestampt taken on the
+ * same CPU.
+ *
+ * See cpu_clock().
+ */
+u64 local_clock(void)
+{
+	u64 clock;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	clock = sched_clock_cpu(smp_processor_id());
+	local_irq_restore(flags);
+
+	return clock;
+}
+
 #else /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
 void sched_clock_init(void)
@@ -264,12 +334,17 @@ u64 sched_clock_cpu(int cpu)
 	return sched_clock();
 }
 
-
-unsigned long long cpu_clock(int cpu)
+u64 cpu_clock(int cpu)
 {
 	return sched_clock_cpu(cpu);
 }
 
+u64 local_clock(void)
+{
+	return sched_clock_cpu(0);
+}
+
 #endif /* CONFIG_HAVE_UNSTABLE_SCHED_CLOCK */
 
 EXPORT_SYMBOL_GPL(cpu_clock);
+EXPORT_SYMBOL_GPL(local_clock);
diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c
index e6871cb3fc8..2722dc1b413 100644
--- a/kernel/sched_cpupri.c
+++ b/kernel/sched_cpupri.c
@@ -166,14 +166,10 @@ void cpupri_set(struct cpupri *cp, int cpu, int newpri)
  *
  * Returns: -ENOMEM if memory fails.
  */
-int cpupri_init(struct cpupri *cp, bool bootmem)
+int cpupri_init(struct cpupri *cp)
 {
-	gfp_t gfp = GFP_KERNEL;
 	int i;
 
-	if (bootmem)
-		gfp = GFP_NOWAIT;
-
 	memset(cp, 0, sizeof(*cp));
 
 	for (i = 0; i < CPUPRI_NR_PRIORITIES; i++) {
@@ -181,7 +177,7 @@ int cpupri_init(struct cpupri *cp, bool bootmem)
 
 		raw_spin_lock_init(&vec->lock);
 		vec->count = 0;
-		if (!zalloc_cpumask_var(&vec->mask, gfp))
+		if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL))
 			goto cleanup;
 	}
 
diff --git a/kernel/sched_cpupri.h b/kernel/sched_cpupri.h
index 7cb5bb6b95b..9fc7d386fea 100644
--- a/kernel/sched_cpupri.h
+++ b/kernel/sched_cpupri.h
@@ -27,7 +27,7 @@ struct cpupri {
 int  cpupri_find(struct cpupri *cp,
 		 struct task_struct *p, struct cpumask *lowest_mask);
 void cpupri_set(struct cpupri *cp, int cpu, int pri);
-int cpupri_init(struct cpupri *cp, bool bootmem);
+int cpupri_init(struct cpupri *cp);
 void cpupri_cleanup(struct cpupri *cp);
 #else
 #define cpupri_set(cp, cpu, pri) do { } while (0)
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 35565395d00..2e1b0d17dd9 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -332,7 +332,7 @@ static int sched_debug_show(struct seq_file *m, void *v)
 	PN(sysctl_sched_latency);
 	PN(sysctl_sched_min_granularity);
 	PN(sysctl_sched_wakeup_granularity);
-	PN(sysctl_sched_child_runs_first);
+	P(sysctl_sched_child_runs_first);
 	P(sysctl_sched_features);
 #undef PN
 #undef P
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index a878b5332da..806d1b227a2 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -2287,13 +2287,6 @@ static void update_cpu_power(struct sched_domain *sd, int cpu)
 	unsigned long power = SCHED_LOAD_SCALE;
 	struct sched_group *sdg = sd->groups;
 
-	if (sched_feat(ARCH_POWER))
-		power *= arch_scale_freq_power(sd, cpu);
-	else
-		power *= default_scale_freq_power(sd, cpu);
-
-	power >>= SCHED_LOAD_SHIFT;
-
 	if ((sd->flags & SD_SHARE_CPUPOWER) && weight > 1) {
 		if (sched_feat(ARCH_POWER))
 			power *= arch_scale_smt_power(sd, cpu);
@@ -2303,6 +2296,15 @@ static void update_cpu_power(struct sched_domain *sd, int cpu)
 		power >>= SCHED_LOAD_SHIFT;
 	}
 
+	sdg->cpu_power_orig = power;
+
+	if (sched_feat(ARCH_POWER))
+		power *= arch_scale_freq_power(sd, cpu);
+	else
+		power *= default_scale_freq_power(sd, cpu);
+
+	power >>= SCHED_LOAD_SHIFT;
+
 	power *= scale_rt_power(cpu);
 	power >>= SCHED_LOAD_SHIFT;
 
@@ -2335,6 +2337,31 @@ static void update_group_power(struct sched_domain *sd, int cpu)
 	sdg->cpu_power = power;
 }
 
+/*
+ * Try and fix up capacity for tiny siblings, this is needed when
+ * things like SD_ASYM_PACKING need f_b_g to select another sibling
+ * which on its own isn't powerful enough.
+ *
+ * See update_sd_pick_busiest() and check_asym_packing().
+ */
+static inline int
+fix_small_capacity(struct sched_domain *sd, struct sched_group *group)
+{
+	/*
+	 * Only siblings can have significantly less than SCHED_LOAD_SCALE
+	 */
+	if (sd->level != SD_LV_SIBLING)
+		return 0;
+
+	/*
+	 * If ~90% of the cpu_power is still there, we're good.
+	 */
+	if (group->cpu_power * 32 > group->cpu_power_orig * 29)
+		return 1;
+
+	return 0;
+}
+
 /**
  * update_sg_lb_stats - Update sched_group's statistics for load balancing.
  * @sd: The sched_domain whose statistics are to be updated.
@@ -2400,14 +2427,14 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 	 * domains. In the newly idle case, we will allow all the cpu's
 	 * to do the newly idle load balance.
 	 */
-	if (idle != CPU_NEWLY_IDLE && local_group &&
-	    balance_cpu != this_cpu) {
-		*balance = 0;
-		return;
+	if (idle != CPU_NEWLY_IDLE && local_group) {
+		if (balance_cpu != this_cpu) {
+			*balance = 0;
+			return;
+		}
+		update_group_power(sd, this_cpu);
 	}
 
-	update_group_power(sd, this_cpu);
-
 	/* Adjust by relative CPU power of the group */
 	sgs->avg_load = (sgs->group_load * SCHED_LOAD_SCALE) / group->cpu_power;
 
@@ -2428,6 +2455,51 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 
 	sgs->group_capacity =
 		DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
+	if (!sgs->group_capacity)
+		sgs->group_capacity = fix_small_capacity(sd, group);
+}
+
+/**
+ * update_sd_pick_busiest - return 1 on busiest group
+ * @sd: sched_domain whose statistics are to be checked
+ * @sds: sched_domain statistics
+ * @sg: sched_group candidate to be checked for being the busiest
+ * @sgs: sched_group statistics
+ * @this_cpu: the current cpu
+ *
+ * Determine if @sg is a busier group than the previously selected
+ * busiest group.
+ */
+static bool update_sd_pick_busiest(struct sched_domain *sd,
+				   struct sd_lb_stats *sds,
+				   struct sched_group *sg,
+				   struct sg_lb_stats *sgs,
+				   int this_cpu)
+{
+	if (sgs->avg_load <= sds->max_load)
+		return false;
+
+	if (sgs->sum_nr_running > sgs->group_capacity)
+		return true;
+
+	if (sgs->group_imb)
+		return true;
+
+	/*
+	 * ASYM_PACKING needs to move all the work to the lowest
+	 * numbered CPUs in the group, therefore mark all groups
+	 * higher than ourself as busy.
+	 */
+	if ((sd->flags & SD_ASYM_PACKING) && sgs->sum_nr_running &&
+	    this_cpu < group_first_cpu(sg)) {
+		if (!sds->busiest)
+			return true;
+
+		if (group_first_cpu(sds->busiest) > group_first_cpu(sg))
+			return true;
+	}
+
+	return false;
 }
 
 /**
@@ -2435,7 +2507,7 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
  * @sd: sched_domain whose statistics are to be updated.
  * @this_cpu: Cpu for which load balance is currently performed.
  * @idle: Idle status of this_cpu
- * @sd_idle: Idle status of the sched_domain containing group.
+ * @sd_idle: Idle status of the sched_domain containing sg.
  * @cpus: Set of cpus considered for load balancing.
  * @balance: Should we balance.
  * @sds: variable to hold the statistics for this sched_domain.
@@ -2446,7 +2518,7 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
 			struct sd_lb_stats *sds)
 {
 	struct sched_domain *child = sd->child;
-	struct sched_group *group = sd->groups;
+	struct sched_group *sg = sd->groups;
 	struct sg_lb_stats sgs;
 	int load_idx, prefer_sibling = 0;
 
@@ -2459,21 +2531,20 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
 	do {
 		int local_group;
 
-		local_group = cpumask_test_cpu(this_cpu,
-					       sched_group_cpus(group));
+		local_group = cpumask_test_cpu(this_cpu, sched_group_cpus(sg));
 		memset(&sgs, 0, sizeof(sgs));
-		update_sg_lb_stats(sd, group, this_cpu, idle, load_idx, sd_idle,
+		update_sg_lb_stats(sd, sg, this_cpu, idle, load_idx, sd_idle,
 				local_group, cpus, balance, &sgs);
 
 		if (local_group && !(*balance))
 			return;
 
 		sds->total_load += sgs.group_load;
-		sds->total_pwr += group->cpu_power;
+		sds->total_pwr += sg->cpu_power;
 
 		/*
 		 * In case the child domain prefers tasks go to siblings
-		 * first, lower the group capacity to one so that we'll try
+		 * first, lower the sg capacity to one so that we'll try
 		 * and move all the excess tasks away.
 		 */
 		if (prefer_sibling)
@@ -2481,23 +2552,72 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
 
 		if (local_group) {
 			sds->this_load = sgs.avg_load;
-			sds->this = group;
+			sds->this = sg;
 			sds->this_nr_running = sgs.sum_nr_running;
 			sds->this_load_per_task = sgs.sum_weighted_load;
-		} else if (sgs.avg_load > sds->max_load &&
-			   (sgs.sum_nr_running > sgs.group_capacity ||
-				sgs.group_imb)) {
+		} else if (update_sd_pick_busiest(sd, sds, sg, &sgs, this_cpu)) {
 			sds->max_load = sgs.avg_load;
-			sds->busiest = group;
+			sds->busiest = sg;
 			sds->busiest_nr_running = sgs.sum_nr_running;
 			sds->busiest_group_capacity = sgs.group_capacity;
 			sds->busiest_load_per_task = sgs.sum_weighted_load;
 			sds->group_imb = sgs.group_imb;
 		}
 
-		update_sd_power_savings_stats(group, sds, local_group, &sgs);
-		group = group->next;
-	} while (group != sd->groups);
+		update_sd_power_savings_stats(sg, sds, local_group, &sgs);
+		sg = sg->next;
+	} while (sg != sd->groups);
+}
+
+int __weak arch_sd_sibling_asym_packing(void)
+{
+       return 0*SD_ASYM_PACKING;
+}
+
+/**
+ * check_asym_packing - Check to see if the group is packed into the
+ *			sched doman.
+ *
+ * This is primarily intended to used at the sibling level.  Some
+ * cores like POWER7 prefer to use lower numbered SMT threads.  In the
+ * case of POWER7, it can move to lower SMT modes only when higher
+ * threads are idle.  When in lower SMT modes, the threads will
+ * perform better since they share less core resources.  Hence when we
+ * have idle threads, we want them to be the higher ones.
+ *
+ * This packing function is run on idle threads.  It checks to see if
+ * the busiest CPU in this domain (core in the P7 case) has a higher
+ * CPU number than the packing function is being run on.  Here we are
+ * assuming lower CPU number will be equivalent to lower a SMT thread
+ * number.
+ *
+ * Returns 1 when packing is required and a task should be moved to
+ * this CPU.  The amount of the imbalance is returned in *imbalance.
+ *
+ * @sd: The sched_domain whose packing is to be checked.
+ * @sds: Statistics of the sched_domain which is to be packed
+ * @this_cpu: The cpu at whose sched_domain we're performing load-balance.
+ * @imbalance: returns amount of imbalanced due to packing.
+ */
+static int check_asym_packing(struct sched_domain *sd,
+			      struct sd_lb_stats *sds,
+			      int this_cpu, unsigned long *imbalance)
+{
+	int busiest_cpu;
+
+	if (!(sd->flags & SD_ASYM_PACKING))
+		return 0;
+
+	if (!sds->busiest)
+		return 0;
+
+	busiest_cpu = group_first_cpu(sds->busiest);
+	if (this_cpu > busiest_cpu)
+		return 0;
+
+	*imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->cpu_power,
+				       SCHED_LOAD_SCALE);
+	return 1;
 }
 
 /**
@@ -2692,6 +2812,10 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 	if (!(*balance))
 		goto ret;
 
+	if ((idle == CPU_IDLE || idle == CPU_NEWLY_IDLE) &&
+	    check_asym_packing(sd, &sds, this_cpu, imbalance))
+		return sds.busiest;
+
 	if (!sds.busiest || sds.busiest_nr_running == 0)
 		goto out_balanced;
 
@@ -2726,8 +2850,9 @@ ret:
  * find_busiest_queue - find the busiest runqueue among the cpus in group.
  */
 static struct rq *
-find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
-		   unsigned long imbalance, const struct cpumask *cpus)
+find_busiest_queue(struct sched_domain *sd, struct sched_group *group,
+		   enum cpu_idle_type idle, unsigned long imbalance,
+		   const struct cpumask *cpus)
 {
 	struct rq *busiest = NULL, *rq;
 	unsigned long max_load = 0;
@@ -2738,6 +2863,9 @@ find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
 		unsigned long capacity = DIV_ROUND_CLOSEST(power, SCHED_LOAD_SCALE);
 		unsigned long wl;
 
+		if (!capacity)
+			capacity = fix_small_capacity(sd, group);
+
 		if (!cpumask_test_cpu(i, cpus))
 			continue;
 
@@ -2777,9 +2905,19 @@ find_busiest_queue(struct sched_group *group, enum cpu_idle_type idle,
 /* Working cpumask for load_balance and load_balance_newidle. */
 static DEFINE_PER_CPU(cpumask_var_t, load_balance_tmpmask);
 
-static int need_active_balance(struct sched_domain *sd, int sd_idle, int idle)
+static int need_active_balance(struct sched_domain *sd, int sd_idle, int idle,
+			       int busiest_cpu, int this_cpu)
 {
 	if (idle == CPU_NEWLY_IDLE) {
+
+		/*
+		 * ASYM_PACKING needs to force migrate tasks from busy but
+		 * higher numbered CPUs in order to pack all tasks in the
+		 * lowest numbered CPUs.
+		 */
+		if ((sd->flags & SD_ASYM_PACKING) && busiest_cpu > this_cpu)
+			return 1;
+
 		/*
 		 * The only task running in a non-idle cpu can be moved to this
 		 * cpu in an attempt to completely freeup the other CPU
@@ -2854,7 +2992,7 @@ redo:
 		goto out_balanced;
 	}
 
-	busiest = find_busiest_queue(group, idle, imbalance, cpus);
+	busiest = find_busiest_queue(sd, group, idle, imbalance, cpus);
 	if (!busiest) {
 		schedstat_inc(sd, lb_nobusyq[idle]);
 		goto out_balanced;
@@ -2898,7 +3036,8 @@ redo:
 		schedstat_inc(sd, lb_failed[idle]);
 		sd->nr_balance_failed++;
 
-		if (need_active_balance(sd, sd_idle, idle)) {
+		if (need_active_balance(sd, sd_idle, idle, cpu_of(busiest),
+					this_cpu)) {
 			raw_spin_lock_irqsave(&busiest->lock, flags);
 
 			/* don't kick the active_load_balance_cpu_stop,
@@ -3093,13 +3232,40 @@ out_unlock:
 }
 
 #ifdef CONFIG_NO_HZ
+
+static DEFINE_PER_CPU(struct call_single_data, remote_sched_softirq_cb);
+
+static void trigger_sched_softirq(void *data)
+{
+	raise_softirq_irqoff(SCHED_SOFTIRQ);
+}
+
+static inline void init_sched_softirq_csd(struct call_single_data *csd)
+{
+	csd->func = trigger_sched_softirq;
+	csd->info = NULL;
+	csd->flags = 0;
+	csd->priv = 0;
+}
+
+/*
+ * idle load balancing details
+ * - One of the idle CPUs nominates itself as idle load_balancer, while
+ *   entering idle.
+ * - This idle load balancer CPU will also go into tickless mode when
+ *   it is idle, just like all other idle CPUs
+ * - When one of the busy CPUs notice that there may be an idle rebalancing
+ *   needed, they will kick the idle load balancer, which then does idle
+ *   load balancing for all the idle CPUs.
+ */
 static struct {
 	atomic_t load_balancer;
-	cpumask_var_t cpu_mask;
-	cpumask_var_t ilb_grp_nohz_mask;
-} nohz ____cacheline_aligned = {
-	.load_balancer = ATOMIC_INIT(-1),
-};
+	atomic_t first_pick_cpu;
+	atomic_t second_pick_cpu;
+	cpumask_var_t idle_cpus_mask;
+	cpumask_var_t grp_idle_mask;
+	unsigned long next_balance;     /* in jiffy units */
+} nohz ____cacheline_aligned;
 
 int get_nohz_load_balancer(void)
 {
@@ -3153,17 +3319,17 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
  */
 static inline int is_semi_idle_group(struct sched_group *ilb_group)
 {
-	cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
+	cpumask_and(nohz.grp_idle_mask, nohz.idle_cpus_mask,
 					sched_group_cpus(ilb_group));
 
 	/*
 	 * A sched_group is semi-idle when it has atleast one busy cpu
 	 * and atleast one idle cpu.
 	 */
-	if (cpumask_empty(nohz.ilb_grp_nohz_mask))
+	if (cpumask_empty(nohz.grp_idle_mask))
 		return 0;
 
-	if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
+	if (cpumask_equal(nohz.grp_idle_mask, sched_group_cpus(ilb_group)))
 		return 0;
 
 	return 1;
@@ -3196,7 +3362,7 @@ static int find_new_ilb(int cpu)
 	 * Optimize for the case when we have no idle CPUs or only one
 	 * idle CPU. Don't walk the sched_domain hierarchy in such cases
 	 */
-	if (cpumask_weight(nohz.cpu_mask) < 2)
+	if (cpumask_weight(nohz.idle_cpus_mask) < 2)
 		goto out_done;
 
 	for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
@@ -3204,7 +3370,7 @@ static int find_new_ilb(int cpu)
 
 		do {
 			if (is_semi_idle_group(ilb_group))
-				return cpumask_first(nohz.ilb_grp_nohz_mask);
+				return cpumask_first(nohz.grp_idle_mask);
 
 			ilb_group = ilb_group->next;
 
@@ -3212,98 +3378,116 @@ static int find_new_ilb(int cpu)
 	}
 
 out_done:
-	return cpumask_first(nohz.cpu_mask);
+	return nr_cpu_ids;
 }
 #else /*  (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
 static inline int find_new_ilb(int call_cpu)
 {
-	return cpumask_first(nohz.cpu_mask);
+	return nr_cpu_ids;
 }
 #endif
 
 /*
+ * Kick a CPU to do the nohz balancing, if it is time for it. We pick the
+ * nohz_load_balancer CPU (if there is one) otherwise fallback to any idle
+ * CPU (if there is one).
+ */
+static void nohz_balancer_kick(int cpu)
+{
+	int ilb_cpu;
+
+	nohz.next_balance++;
+
+	ilb_cpu = get_nohz_load_balancer();
+
+	if (ilb_cpu >= nr_cpu_ids) {
+		ilb_cpu = cpumask_first(nohz.idle_cpus_mask);
+		if (ilb_cpu >= nr_cpu_ids)
+			return;
+	}
+
+	if (!cpu_rq(ilb_cpu)->nohz_balance_kick) {
+		struct call_single_data *cp;
+
+		cpu_rq(ilb_cpu)->nohz_balance_kick = 1;
+		cp = &per_cpu(remote_sched_softirq_cb, cpu);
+		__smp_call_function_single(ilb_cpu, cp, 0);
+	}
+	return;
+}
+
+/*
  * This routine will try to nominate the ilb (idle load balancing)
  * owner among the cpus whose ticks are stopped. ilb owner will do the idle
- * load balancing on behalf of all those cpus. If all the cpus in the system
- * go into this tickless mode, then there will be no ilb owner (as there is
- * no need for one) and all the cpus will sleep till the next wakeup event
- * arrives...
- *
- * For the ilb owner, tick is not stopped. And this tick will be used
- * for idle load balancing. ilb owner will still be part of
- * nohz.cpu_mask..
+ * load balancing on behalf of all those cpus.
  *
- * While stopping the tick, this cpu will become the ilb owner if there
- * is no other owner. And will be the owner till that cpu becomes busy
- * or if all cpus in the system stop their ticks at which point
- * there is no need for ilb owner.
+ * When the ilb owner becomes busy, we will not have new ilb owner until some
+ * idle CPU wakes up and goes back to idle or some busy CPU tries to kick
+ * idle load balancing by kicking one of the idle CPUs.
  *
- * When the ilb owner becomes busy, it nominates another owner, during the
- * next busy scheduler_tick()
+ * Ticks are stopped for the ilb owner as well, with busy CPU kicking this
+ * ilb owner CPU in future (when there is a need for idle load balancing on
+ * behalf of all idle CPUs).
  */
-int select_nohz_load_balancer(int stop_tick)
+void select_nohz_load_balancer(int stop_tick)
 {
 	int cpu = smp_processor_id();
 
 	if (stop_tick) {
-		cpu_rq(cpu)->in_nohz_recently = 1;
-
 		if (!cpu_active(cpu)) {
 			if (atomic_read(&nohz.load_balancer) != cpu)
-				return 0;
+				return;
 
 			/*
 			 * If we are going offline and still the leader,
 			 * give up!
 			 */
-			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
+			if (atomic_cmpxchg(&nohz.load_balancer, cpu,
+					   nr_cpu_ids) != cpu)
 				BUG();
 
-			return 0;
+			return;
 		}
 
-		cpumask_set_cpu(cpu, nohz.cpu_mask);
+		cpumask_set_cpu(cpu, nohz.idle_cpus_mask);
 
-		/* time for ilb owner also to sleep */
-		if (cpumask_weight(nohz.cpu_mask) == num_active_cpus()) {
-			if (atomic_read(&nohz.load_balancer) == cpu)
-				atomic_set(&nohz.load_balancer, -1);
-			return 0;
-		}
+		if (atomic_read(&nohz.first_pick_cpu) == cpu)
+			atomic_cmpxchg(&nohz.first_pick_cpu, cpu, nr_cpu_ids);
+		if (atomic_read(&nohz.second_pick_cpu) == cpu)
+			atomic_cmpxchg(&nohz.second_pick_cpu, cpu, nr_cpu_ids);
 
-		if (atomic_read(&nohz.load_balancer) == -1) {
-			/* make me the ilb owner */
-			if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
-				return 1;
-		} else if (atomic_read(&nohz.load_balancer) == cpu) {
+		if (atomic_read(&nohz.load_balancer) >= nr_cpu_ids) {
 			int new_ilb;
 
-			if (!(sched_smt_power_savings ||
-						sched_mc_power_savings))
-				return 1;
+			/* make me the ilb owner */
+			if (atomic_cmpxchg(&nohz.load_balancer, nr_cpu_ids,
+					   cpu) != nr_cpu_ids)
+				return;
+
 			/*
 			 * Check to see if there is a more power-efficient
 			 * ilb.
 			 */
 			new_ilb = find_new_ilb(cpu);
 			if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
-				atomic_set(&nohz.load_balancer, -1);
+				atomic_set(&nohz.load_balancer, nr_cpu_ids);
 				resched_cpu(new_ilb);
-				return 0;
+				return;
 			}
-			return 1;
+			return;
 		}
 	} else {
-		if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
-			return 0;
+		if (!cpumask_test_cpu(cpu, nohz.idle_cpus_mask))
+			return;
 
-		cpumask_clear_cpu(cpu, nohz.cpu_mask);
+		cpumask_clear_cpu(cpu, nohz.idle_cpus_mask);
 
 		if (atomic_read(&nohz.load_balancer) == cpu)
-			if (atomic_cmpxchg(&nohz.load_balancer, cpu, -1) != cpu)
+			if (atomic_cmpxchg(&nohz.load_balancer, cpu,
+					   nr_cpu_ids) != cpu)
 				BUG();
 	}
-	return 0;
+	return;
 }
 #endif
 
@@ -3385,11 +3569,102 @@ out:
 		rq->next_balance = next_balance;
 }
 
+#ifdef CONFIG_NO_HZ
 /*
- * run_rebalance_domains is triggered when needed from the scheduler tick.
- * In CONFIG_NO_HZ case, the idle load balance owner will do the
+ * In CONFIG_NO_HZ case, the idle balance kickee will do the
  * rebalancing for all the cpus for whom scheduler ticks are stopped.
  */
+static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle)
+{
+	struct rq *this_rq = cpu_rq(this_cpu);
+	struct rq *rq;
+	int balance_cpu;
+
+	if (idle != CPU_IDLE || !this_rq->nohz_balance_kick)
+		return;
+
+	for_each_cpu(balance_cpu, nohz.idle_cpus_mask) {
+		if (balance_cpu == this_cpu)
+			continue;
+
+		/*
+		 * If this cpu gets work to do, stop the load balancing
+		 * work being done for other cpus. Next load
+		 * balancing owner will pick it up.
+		 */
+		if (need_resched()) {
+			this_rq->nohz_balance_kick = 0;
+			break;
+		}
+
+		raw_spin_lock_irq(&this_rq->lock);
+		update_rq_clock(this_rq);
+		update_cpu_load(this_rq);
+		raw_spin_unlock_irq(&this_rq->lock);
+
+		rebalance_domains(balance_cpu, CPU_IDLE);
+
+		rq = cpu_rq(balance_cpu);
+		if (time_after(this_rq->next_balance, rq->next_balance))
+			this_rq->next_balance = rq->next_balance;
+	}
+	nohz.next_balance = this_rq->next_balance;
+	this_rq->nohz_balance_kick = 0;
+}
+
+/*
+ * Current heuristic for kicking the idle load balancer
+ * - first_pick_cpu is the one of the busy CPUs. It will kick
+ *   idle load balancer when it has more than one process active. This
+ *   eliminates the need for idle load balancing altogether when we have
+ *   only one running process in the system (common case).
+ * - If there are more than one busy CPU, idle load balancer may have
+ *   to run for active_load_balance to happen (i.e., two busy CPUs are
+ *   SMT or core siblings and can run better if they move to different
+ *   physical CPUs). So, second_pick_cpu is the second of the busy CPUs
+ *   which will kick idle load balancer as soon as it has any load.
+ */
+static inline int nohz_kick_needed(struct rq *rq, int cpu)
+{
+	unsigned long now = jiffies;
+	int ret;
+	int first_pick_cpu, second_pick_cpu;
+
+	if (time_before(now, nohz.next_balance))
+		return 0;
+
+	if (!rq->nr_running)
+		return 0;
+
+	first_pick_cpu = atomic_read(&nohz.first_pick_cpu);
+	second_pick_cpu = atomic_read(&nohz.second_pick_cpu);
+
+	if (first_pick_cpu < nr_cpu_ids && first_pick_cpu != cpu &&
+	    second_pick_cpu < nr_cpu_ids && second_pick_cpu != cpu)
+		return 0;
+
+	ret = atomic_cmpxchg(&nohz.first_pick_cpu, nr_cpu_ids, cpu);
+	if (ret == nr_cpu_ids || ret == cpu) {
+		atomic_cmpxchg(&nohz.second_pick_cpu, cpu, nr_cpu_ids);
+		if (rq->nr_running > 1)
+			return 1;
+	} else {
+		ret = atomic_cmpxchg(&nohz.second_pick_cpu, nr_cpu_ids, cpu);
+		if (ret == nr_cpu_ids || ret == cpu) {
+			if (rq->nr_running)
+				return 1;
+		}
+	}
+	return 0;
+}
+#else
+static void nohz_idle_balance(int this_cpu, enum cpu_idle_type idle) { }
+#endif
+
+/*
+ * run_rebalance_domains is triggered when needed from the scheduler tick.
+ * Also triggered for nohz idle balancing (with nohz_balancing_kick set).
+ */
 static void run_rebalance_domains(struct softirq_action *h)
 {
 	int this_cpu = smp_processor_id();
@@ -3399,37 +3674,12 @@ static void run_rebalance_domains(struct softirq_action *h)
 
 	rebalance_domains(this_cpu, idle);
 
-#ifdef CONFIG_NO_HZ
 	/*
-	 * If this cpu is the owner for idle load balancing, then do the
+	 * If this cpu has a pending nohz_balance_kick, then do the
 	 * balancing on behalf of the other idle cpus whose ticks are
 	 * stopped.
 	 */
-	if (this_rq->idle_at_tick &&
-	    atomic_read(&nohz.load_balancer) == this_cpu) {
-		struct rq *rq;
-		int balance_cpu;
-
-		for_each_cpu(balance_cpu, nohz.cpu_mask) {
-			if (balance_cpu == this_cpu)
-				continue;
-
-			/*
-			 * If this cpu gets work to do, stop the load balancing
-			 * work being done for other cpus. Next load
-			 * balancing owner will pick it up.
-			 */
-			if (need_resched())
-				break;
-
-			rebalance_domains(balance_cpu, CPU_IDLE);
-
-			rq = cpu_rq(balance_cpu);
-			if (time_after(this_rq->next_balance, rq->next_balance))
-				this_rq->next_balance = rq->next_balance;
-		}
-	}
-#endif
+	nohz_idle_balance(this_cpu, idle);
 }
 
 static inline int on_null_domain(int cpu)
@@ -3439,57 +3689,17 @@ static inline int on_null_domain(int cpu)
 
 /*
  * Trigger the SCHED_SOFTIRQ if it is time to do periodic load balancing.
- *
- * In case of CONFIG_NO_HZ, this is the place where we nominate a new
- * idle load balancing owner or decide to stop the periodic load balancing,
- * if the whole system is idle.
  */
 static inline void trigger_load_balance(struct rq *rq, int cpu)
 {
-#ifdef CONFIG_NO_HZ
-	/*
-	 * If we were in the nohz mode recently and busy at the current
-	 * scheduler tick, then check if we need to nominate new idle
-	 * load balancer.
-	 */
-	if (rq->in_nohz_recently && !rq->idle_at_tick) {
-		rq->in_nohz_recently = 0;
-
-		if (atomic_read(&nohz.load_balancer) == cpu) {
-			cpumask_clear_cpu(cpu, nohz.cpu_mask);
-			atomic_set(&nohz.load_balancer, -1);
-		}
-
-		if (atomic_read(&nohz.load_balancer) == -1) {
-			int ilb = find_new_ilb(cpu);
-
-			if (ilb < nr_cpu_ids)
-				resched_cpu(ilb);
-		}
-	}
-
-	/*
-	 * If this cpu is idle and doing idle load balancing for all the
-	 * cpus with ticks stopped, is it time for that to stop?
-	 */
-	if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) == cpu &&
-	    cpumask_weight(nohz.cpu_mask) == num_online_cpus()) {
-		resched_cpu(cpu);
-		return;
-	}
-
-	/*
-	 * If this cpu is idle and the idle load balancing is done by
-	 * someone else, then no need raise the SCHED_SOFTIRQ
-	 */
-	if (rq->idle_at_tick && atomic_read(&nohz.load_balancer) != cpu &&
-	    cpumask_test_cpu(cpu, nohz.cpu_mask))
-		return;
-#endif
 	/* Don't need to rebalance while attached to NULL domain */
 	if (time_after_eq(jiffies, rq->next_balance) &&
 	    likely(!on_null_domain(cpu)))
 		raise_softirq(SCHED_SOFTIRQ);
+#ifdef CONFIG_NO_HZ
+	else if (nohz_kick_needed(rq, cpu) && likely(!on_null_domain(cpu)))
+		nohz_balancer_kick(cpu);
+#endif
 }
 
 static void rq_online_fair(struct rq *rq)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 8afb953e31c..d10c80ebb67 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1663,9 +1663,6 @@ static void watchdog(struct rq *rq, struct task_struct *p)
 {
 	unsigned long soft, hard;
 
-	if (!p->signal)
-		return;
-
 	/* max may change after cur was read, this will be fixed next tick */
 	soft = task_rlimit(p, RLIMIT_RTTIME);
 	hard = task_rlimit_max(p, RLIMIT_RTTIME);
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index 32d2bd4061b..25c2f962f6f 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -295,13 +295,7 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next)
 static inline void account_group_user_time(struct task_struct *tsk,
 					   cputime_t cputime)
 {
-	struct thread_group_cputimer *cputimer;
-
-	/* tsk == current, ensure it is safe to use ->signal */
-	if (unlikely(tsk->exit_state))
-		return;
-
-	cputimer = &tsk->signal->cputimer;
+	struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
 
 	if (!cputimer->running)
 		return;
@@ -325,13 +319,7 @@ static inline void account_group_user_time(struct task_struct *tsk,
 static inline void account_group_system_time(struct task_struct *tsk,
 					     cputime_t cputime)
 {
-	struct thread_group_cputimer *cputimer;
-
-	/* tsk == current, ensure it is safe to use ->signal */
-	if (unlikely(tsk->exit_state))
-		return;
-
-	cputimer = &tsk->signal->cputimer;
+	struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
 
 	if (!cputimer->running)
 		return;
@@ -355,16 +343,7 @@ static inline void account_group_system_time(struct task_struct *tsk,
 static inline void account_group_exec_runtime(struct task_struct *tsk,
 					      unsigned long long ns)
 {
-	struct thread_group_cputimer *cputimer;
-	struct signal_struct *sig;
-
-	sig = tsk->signal;
-	/* see __exit_signal()->task_rq_unlock_wait() */
-	barrier();
-	if (unlikely(!sig))
-		return;
-
-	cputimer = &sig->cputimer;
+	struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
 
 	if (!cputimer->running)
 		return;
diff --git a/kernel/slow-work-debugfs.c b/kernel/slow-work-debugfs.c
deleted file mode 100644
index e45c4364529..00000000000
--- a/kernel/slow-work-debugfs.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/* Slow work debugging
- *
- * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/slow-work.h>
-#include <linux/fs.h>
-#include <linux/time.h>
-#include <linux/seq_file.h>
-#include "slow-work.h"
-
-#define ITERATOR_SHIFT		(BITS_PER_LONG - 4)
-#define ITERATOR_SELECTOR	(0xfUL << ITERATOR_SHIFT)
-#define ITERATOR_COUNTER	(~ITERATOR_SELECTOR)
-
-void slow_work_new_thread_desc(struct slow_work *work, struct seq_file *m)
-{
-	seq_puts(m, "Slow-work: New thread");
-}
-
-/*
- * Render the time mark field on a work item into a 5-char time with units plus
- * a space
- */
-static void slow_work_print_mark(struct seq_file *m, struct slow_work *work)
-{
-	struct timespec now, diff;
-
-	now = CURRENT_TIME;
-	diff = timespec_sub(now, work->mark);
-
-	if (diff.tv_sec < 0)
-		seq_puts(m, "  -ve ");
-	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000)
-		seq_printf(m, "%3luns ", diff.tv_nsec);
-	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000)
-		seq_printf(m, "%3luus ", diff.tv_nsec / 1000);
-	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000000)
-		seq_printf(m, "%3lums ", diff.tv_nsec / 1000000);
-	else if (diff.tv_sec <= 1)
-		seq_puts(m, "   1s ");
-	else if (diff.tv_sec < 60)
-		seq_printf(m, "%4lus ", diff.tv_sec);
-	else if (diff.tv_sec < 60 * 60)
-		seq_printf(m, "%4lum ", diff.tv_sec / 60);
-	else if (diff.tv_sec < 60 * 60 * 24)
-		seq_printf(m, "%4luh ", diff.tv_sec / 3600);
-	else
-		seq_puts(m, "exces ");
-}
-
-/*
- * Describe a slow work item for debugfs
- */
-static int slow_work_runqueue_show(struct seq_file *m, void *v)
-{
-	struct slow_work *work;
-	struct list_head *p = v;
-	unsigned long id;
-
-	switch ((unsigned long) v) {
-	case 1:
-		seq_puts(m, "THR PID   ITEM ADDR        FL MARK  DESC\n");
-		return 0;
-	case 2:
-		seq_puts(m, "=== ===== ================ == ===== ==========\n");
-		return 0;
-
-	case 3 ... 3 + SLOW_WORK_THREAD_LIMIT - 1:
-		id = (unsigned long) v - 3;
-
-		read_lock(&slow_work_execs_lock);
-		work = slow_work_execs[id];
-		if (work) {
-			smp_read_barrier_depends();
-
-			seq_printf(m, "%3lu %5d %16p %2lx ",
-				   id, slow_work_pids[id], work, work->flags);
-			slow_work_print_mark(m, work);
-
-			if (work->ops->desc)
-				work->ops->desc(work, m);
-			seq_putc(m, '\n');
-		}
-		read_unlock(&slow_work_execs_lock);
-		return 0;
-
-	default:
-		work = list_entry(p, struct slow_work, link);
-		seq_printf(m, "%3s     - %16p %2lx ",
-			   work->flags & SLOW_WORK_VERY_SLOW ? "vsq" : "sq",
-			   work, work->flags);
-		slow_work_print_mark(m, work);
-
-		if (work->ops->desc)
-			work->ops->desc(work, m);
-		seq_putc(m, '\n');
-		return 0;
-	}
-}
-
-/*
- * map the iterator to a work item
- */
-static void *slow_work_runqueue_index(struct seq_file *m, loff_t *_pos)
-{
-	struct list_head *p;
-	unsigned long count, id;
-
-	switch (*_pos >> ITERATOR_SHIFT) {
-	case 0x0:
-		if (*_pos == 0)
-			*_pos = 1;
-		if (*_pos < 3)
-			return (void *)(unsigned long) *_pos;
-		if (*_pos < 3 + SLOW_WORK_THREAD_LIMIT)
-			for (id = *_pos - 3;
-			     id < SLOW_WORK_THREAD_LIMIT;
-			     id++, (*_pos)++)
-				if (slow_work_execs[id])
-					return (void *)(unsigned long) *_pos;
-		*_pos = 0x1UL << ITERATOR_SHIFT;
-
-	case 0x1:
-		count = *_pos & ITERATOR_COUNTER;
-		list_for_each(p, &slow_work_queue) {
-			if (count == 0)
-				return p;
-			count--;
-		}
-		*_pos = 0x2UL << ITERATOR_SHIFT;
-
-	case 0x2:
-		count = *_pos & ITERATOR_COUNTER;
-		list_for_each(p, &vslow_work_queue) {
-			if (count == 0)
-				return p;
-			count--;
-		}
-		*_pos = 0x3UL << ITERATOR_SHIFT;
-
-	default:
-		return NULL;
-	}
-}
-
-/*
- * set up the iterator to start reading from the first line
- */
-static void *slow_work_runqueue_start(struct seq_file *m, loff_t *_pos)
-{
-	spin_lock_irq(&slow_work_queue_lock);
-	return slow_work_runqueue_index(m, _pos);
-}
-
-/*
- * move to the next line
- */
-static void *slow_work_runqueue_next(struct seq_file *m, void *v, loff_t *_pos)
-{
-	struct list_head *p = v;
-	unsigned long selector = *_pos >> ITERATOR_SHIFT;
-
-	(*_pos)++;
-	switch (selector) {
-	case 0x0:
-		return slow_work_runqueue_index(m, _pos);
-
-	case 0x1:
-		if (*_pos >> ITERATOR_SHIFT == 0x1) {
-			p = p->next;
-			if (p != &slow_work_queue)
-				return p;
-		}
-		*_pos = 0x2UL << ITERATOR_SHIFT;
-		p = &vslow_work_queue;
-
-	case 0x2:
-		if (*_pos >> ITERATOR_SHIFT == 0x2) {
-			p = p->next;
-			if (p != &vslow_work_queue)
-				return p;
-		}
-		*_pos = 0x3UL << ITERATOR_SHIFT;
-
-	default:
-		return NULL;
-	}
-}
-
-/*
- * clean up after reading
- */
-static void slow_work_runqueue_stop(struct seq_file *m, void *v)
-{
-	spin_unlock_irq(&slow_work_queue_lock);
-}
-
-static const struct seq_operations slow_work_runqueue_ops = {
-	.start		= slow_work_runqueue_start,
-	.stop		= slow_work_runqueue_stop,
-	.next		= slow_work_runqueue_next,
-	.show		= slow_work_runqueue_show,
-};
-
-/*
- * open "/sys/kernel/debug/slow_work/runqueue" to list queue contents
- */
-static int slow_work_runqueue_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &slow_work_runqueue_ops);
-}
-
-const struct file_operations slow_work_runqueue_fops = {
-	.owner		= THIS_MODULE,
-	.open		= slow_work_runqueue_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
deleted file mode 100644
index 7d3f4fa9ef4..00000000000
--- a/kernel/slow-work.c
+++ /dev/null
@@ -1,1068 +0,0 @@
-/* Worker thread pool for slow items, such as filesystem lookups or mkdirs
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- * See Documentation/slow-work.txt
- */
-
-#include <linux/module.h>
-#include <linux/slow-work.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/wait.h>
-#include <linux/debugfs.h>
-#include "slow-work.h"
-
-static void slow_work_cull_timeout(unsigned long);
-static void slow_work_oom_timeout(unsigned long);
-
-#ifdef CONFIG_SYSCTL
-static int slow_work_min_threads_sysctl(struct ctl_table *, int,
-					void __user *, size_t *, loff_t *);
-
-static int slow_work_max_threads_sysctl(struct ctl_table *, int ,
-					void __user *, size_t *, loff_t *);
-#endif
-
-/*
- * The pool of threads has at least min threads in it as long as someone is
- * using the facility, and may have as many as max.
- *
- * A portion of the pool may be processing very slow operations.
- */
-static unsigned slow_work_min_threads = 2;
-static unsigned slow_work_max_threads = 4;
-static unsigned vslow_work_proportion = 50; /* % of threads that may process
-					     * very slow work */
-
-#ifdef CONFIG_SYSCTL
-static const int slow_work_min_min_threads = 2;
-static int slow_work_max_max_threads = SLOW_WORK_THREAD_LIMIT;
-static const int slow_work_min_vslow = 1;
-static const int slow_work_max_vslow = 99;
-
-ctl_table slow_work_sysctls[] = {
-	{
-		.procname	= "min-threads",
-		.data		= &slow_work_min_threads,
-		.maxlen		= sizeof(unsigned),
-		.mode		= 0644,
-		.proc_handler	= slow_work_min_threads_sysctl,
-		.extra1		= (void *) &slow_work_min_min_threads,
-		.extra2		= &slow_work_max_threads,
-	},
-	{
-		.procname	= "max-threads",
-		.data		= &slow_work_max_threads,
-		.maxlen		= sizeof(unsigned),
-		.mode		= 0644,
-		.proc_handler	= slow_work_max_threads_sysctl,
-		.extra1		= &slow_work_min_threads,
-		.extra2		= (void *) &slow_work_max_max_threads,
-	},
-	{
-		.procname	= "vslow-percentage",
-		.data		= &vslow_work_proportion,
-		.maxlen		= sizeof(unsigned),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= (void *) &slow_work_min_vslow,
-		.extra2		= (void *) &slow_work_max_vslow,
-	},
-	{}
-};
-#endif
-
-/*
- * The active state of the thread pool
- */
-static atomic_t slow_work_thread_count;
-static atomic_t vslow_work_executing_count;
-
-static bool slow_work_may_not_start_new_thread;
-static bool slow_work_cull; /* cull a thread due to lack of activity */
-static DEFINE_TIMER(slow_work_cull_timer, slow_work_cull_timeout, 0, 0);
-static DEFINE_TIMER(slow_work_oom_timer, slow_work_oom_timeout, 0, 0);
-static struct slow_work slow_work_new_thread; /* new thread starter */
-
-/*
- * slow work ID allocation (use slow_work_queue_lock)
- */
-static DECLARE_BITMAP(slow_work_ids, SLOW_WORK_THREAD_LIMIT);
-
-/*
- * Unregistration tracking to prevent put_ref() from disappearing during module
- * unload
- */
-#ifdef CONFIG_MODULES
-static struct module *slow_work_thread_processing[SLOW_WORK_THREAD_LIMIT];
-static struct module *slow_work_unreg_module;
-static struct slow_work *slow_work_unreg_work_item;
-static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq);
-static DEFINE_MUTEX(slow_work_unreg_sync_lock);
-
-static void slow_work_set_thread_processing(int id, struct slow_work *work)
-{
-	if (work)
-		slow_work_thread_processing[id] = work->owner;
-}
-static void slow_work_done_thread_processing(int id, struct slow_work *work)
-{
-	struct module *module = slow_work_thread_processing[id];
-
-	slow_work_thread_processing[id] = NULL;
-	smp_mb();
-	if (slow_work_unreg_work_item == work ||
-	    slow_work_unreg_module == module)
-		wake_up_all(&slow_work_unreg_wq);
-}
-static void slow_work_clear_thread_processing(int id)
-{
-	slow_work_thread_processing[id] = NULL;
-}
-#else
-static void slow_work_set_thread_processing(int id, struct slow_work *work) {}
-static void slow_work_done_thread_processing(int id, struct slow_work *work) {}
-static void slow_work_clear_thread_processing(int id) {}
-#endif
-
-/*
- * Data for tracking currently executing items for indication through /proc
- */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT];
-pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT];
-DEFINE_RWLOCK(slow_work_execs_lock);
-#endif
-
-/*
- * The queues of work items and the lock governing access to them.  These are
- * shared between all the CPUs.  It doesn't make sense to have per-CPU queues
- * as the number of threads bears no relation to the number of CPUs.
- *
- * There are two queues of work items: one for slow work items, and one for
- * very slow work items.
- */
-LIST_HEAD(slow_work_queue);
-LIST_HEAD(vslow_work_queue);
-DEFINE_SPINLOCK(slow_work_queue_lock);
-
-/*
- * The following are two wait queues that get pinged when a work item is placed
- * on an empty queue.  These allow work items that are hogging a thread by
- * sleeping in a way that could be deferred to yield their thread and enqueue
- * themselves.
- */
-static DECLARE_WAIT_QUEUE_HEAD(slow_work_queue_waits_for_occupation);
-static DECLARE_WAIT_QUEUE_HEAD(vslow_work_queue_waits_for_occupation);
-
-/*
- * The thread controls.  A variable used to signal to the threads that they
- * should exit when the queue is empty, a waitqueue used by the threads to wait
- * for signals, and a completion set by the last thread to exit.
- */
-static bool slow_work_threads_should_exit;
-static DECLARE_WAIT_QUEUE_HEAD(slow_work_thread_wq);
-static DECLARE_COMPLETION(slow_work_last_thread_exited);
-
-/*
- * The number of users of the thread pool and its lock.  Whilst this is zero we
- * have no threads hanging around, and when this reaches zero, we wait for all
- * active or queued work items to complete and kill all the threads we do have.
- */
-static int slow_work_user_count;
-static DEFINE_MUTEX(slow_work_user_lock);
-
-static inline int slow_work_get_ref(struct slow_work *work)
-{
-	if (work->ops->get_ref)
-		return work->ops->get_ref(work);
-
-	return 0;
-}
-
-static inline void slow_work_put_ref(struct slow_work *work)
-{
-	if (work->ops->put_ref)
-		work->ops->put_ref(work);
-}
-
-/*
- * Calculate the maximum number of active threads in the pool that are
- * permitted to process very slow work items.
- *
- * The answer is rounded up to at least 1, but may not equal or exceed the
- * maximum number of the threads in the pool.  This means we always have at
- * least one thread that can process slow work items, and we always have at
- * least one thread that won't get tied up doing so.
- */
-static unsigned slow_work_calc_vsmax(void)
-{
-	unsigned vsmax;
-
-	vsmax = atomic_read(&slow_work_thread_count) * vslow_work_proportion;
-	vsmax /= 100;
-	vsmax = max(vsmax, 1U);
-	return min(vsmax, slow_work_max_threads - 1);
-}
-
-/*
- * Attempt to execute stuff queued on a slow thread.  Return true if we managed
- * it, false if there was nothing to do.
- */
-static noinline bool slow_work_execute(int id)
-{
-	struct slow_work *work = NULL;
-	unsigned vsmax;
-	bool very_slow;
-
-	vsmax = slow_work_calc_vsmax();
-
-	/* see if we can schedule a new thread to be started if we're not
-	 * keeping up with the work */
-	if (!waitqueue_active(&slow_work_thread_wq) &&
-	    (!list_empty(&slow_work_queue) || !list_empty(&vslow_work_queue)) &&
-	    atomic_read(&slow_work_thread_count) < slow_work_max_threads &&
-	    !slow_work_may_not_start_new_thread)
-		slow_work_enqueue(&slow_work_new_thread);
-
-	/* find something to execute */
-	spin_lock_irq(&slow_work_queue_lock);
-	if (!list_empty(&vslow_work_queue) &&
-	    atomic_read(&vslow_work_executing_count) < vsmax) {
-		work = list_entry(vslow_work_queue.next,
-				  struct slow_work, link);
-		if (test_and_set_bit_lock(SLOW_WORK_EXECUTING, &work->flags))
-			BUG();
-		list_del_init(&work->link);
-		atomic_inc(&vslow_work_executing_count);
-		very_slow = true;
-	} else if (!list_empty(&slow_work_queue)) {
-		work = list_entry(slow_work_queue.next,
-				  struct slow_work, link);
-		if (test_and_set_bit_lock(SLOW_WORK_EXECUTING, &work->flags))
-			BUG();
-		list_del_init(&work->link);
-		very_slow = false;
-	} else {
-		very_slow = false; /* avoid the compiler warning */
-	}
-
-	slow_work_set_thread_processing(id, work);
-	if (work) {
-		slow_work_mark_time(work);
-		slow_work_begin_exec(id, work);
-	}
-
-	spin_unlock_irq(&slow_work_queue_lock);
-
-	if (!work)
-		return false;
-
-	if (!test_and_clear_bit(SLOW_WORK_PENDING, &work->flags))
-		BUG();
-
-	/* don't execute if the work is in the process of being cancelled */
-	if (!test_bit(SLOW_WORK_CANCELLING, &work->flags))
-		work->ops->execute(work);
-
-	if (very_slow)
-		atomic_dec(&vslow_work_executing_count);
-	clear_bit_unlock(SLOW_WORK_EXECUTING, &work->flags);
-
-	/* wake up anyone waiting for this work to be complete */
-	wake_up_bit(&work->flags, SLOW_WORK_EXECUTING);
-
-	slow_work_end_exec(id, work);
-
-	/* if someone tried to enqueue the item whilst we were executing it,
-	 * then it'll be left unenqueued to avoid multiple threads trying to
-	 * execute it simultaneously
-	 *
-	 * there is, however, a race between us testing the pending flag and
-	 * getting the spinlock, and between the enqueuer setting the pending
-	 * flag and getting the spinlock, so we use a deferral bit to tell us
-	 * if the enqueuer got there first
-	 */
-	if (test_bit(SLOW_WORK_PENDING, &work->flags)) {
-		spin_lock_irq(&slow_work_queue_lock);
-
-		if (!test_bit(SLOW_WORK_EXECUTING, &work->flags) &&
-		    test_and_clear_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags))
-			goto auto_requeue;
-
-		spin_unlock_irq(&slow_work_queue_lock);
-	}
-
-	/* sort out the race between module unloading and put_ref() */
-	slow_work_put_ref(work);
-	slow_work_done_thread_processing(id, work);
-
-	return true;
-
-auto_requeue:
-	/* we must complete the enqueue operation
-	 * - we transfer our ref on the item back to the appropriate queue
-	 * - don't wake another thread up as we're awake already
-	 */
-	slow_work_mark_time(work);
-	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags))
-		list_add_tail(&work->link, &vslow_work_queue);
-	else
-		list_add_tail(&work->link, &slow_work_queue);
-	spin_unlock_irq(&slow_work_queue_lock);
-	slow_work_clear_thread_processing(id);
-	return true;
-}
-
-/**
- * slow_work_sleep_till_thread_needed - Sleep till thread needed by other work
- * work: The work item under execution that wants to sleep
- * _timeout: Scheduler sleep timeout
- *
- * Allow a requeueable work item to sleep on a slow-work processor thread until
- * that thread is needed to do some other work or the sleep is interrupted by
- * some other event.
- *
- * The caller must set up a wake up event before calling this and must have set
- * the appropriate sleep mode (such as TASK_UNINTERRUPTIBLE) and tested its own
- * condition before calling this function as no test is made here.
- *
- * False is returned if there is nothing on the queue; true is returned if the
- * work item should be requeued
- */
-bool slow_work_sleep_till_thread_needed(struct slow_work *work,
-					signed long *_timeout)
-{
-	wait_queue_head_t *wfo_wq;
-	struct list_head *queue;
-
-	DEFINE_WAIT(wait);
-
-	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
-		wfo_wq = &vslow_work_queue_waits_for_occupation;
-		queue = &vslow_work_queue;
-	} else {
-		wfo_wq = &slow_work_queue_waits_for_occupation;
-		queue = &slow_work_queue;
-	}
-
-	if (!list_empty(queue))
-		return true;
-
-	add_wait_queue_exclusive(wfo_wq, &wait);
-	if (list_empty(queue))
-		*_timeout = schedule_timeout(*_timeout);
-	finish_wait(wfo_wq, &wait);
-
-	return !list_empty(queue);
-}
-EXPORT_SYMBOL(slow_work_sleep_till_thread_needed);
-
-/**
- * slow_work_enqueue - Schedule a slow work item for processing
- * @work: The work item to queue
- *
- * Schedule a slow work item for processing.  If the item is already undergoing
- * execution, this guarantees not to re-enter the execution routine until the
- * first execution finishes.
- *
- * The item is pinned by this function as it retains a reference to it, managed
- * through the item operations.  The item is unpinned once it has been
- * executed.
- *
- * An item may hog the thread that is running it for a relatively large amount
- * of time, sufficient, for example, to perform several lookup, mkdir, create
- * and setxattr operations.  It may sleep on I/O and may sleep to obtain locks.
- *
- * Conversely, if a number of items are awaiting processing, it may take some
- * time before any given item is given attention.  The number of threads in the
- * pool may be increased to deal with demand, but only up to a limit.
- *
- * If SLOW_WORK_VERY_SLOW is set on the work item, then it will be placed in
- * the very slow queue, from which only a portion of the threads will be
- * allowed to pick items to execute.  This ensures that very slow items won't
- * overly block ones that are just ordinarily slow.
- *
- * Returns 0 if successful, -EAGAIN if not (or -ECANCELED if cancelled work is
- * attempted queued)
- */
-int slow_work_enqueue(struct slow_work *work)
-{
-	wait_queue_head_t *wfo_wq;
-	struct list_head *queue;
-	unsigned long flags;
-	int ret;
-
-	if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
-		return -ECANCELED;
-
-	BUG_ON(slow_work_user_count <= 0);
-	BUG_ON(!work);
-	BUG_ON(!work->ops);
-
-	/* when honouring an enqueue request, we only promise that we will run
-	 * the work function in the future; we do not promise to run it once
-	 * per enqueue request
-	 *
-	 * we use the PENDING bit to merge together repeat requests without
-	 * having to disable IRQs and take the spinlock, whilst still
-	 * maintaining our promise
-	 */
-	if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) {
-		if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
-			wfo_wq = &vslow_work_queue_waits_for_occupation;
-			queue = &vslow_work_queue;
-		} else {
-			wfo_wq = &slow_work_queue_waits_for_occupation;
-			queue = &slow_work_queue;
-		}
-
-		spin_lock_irqsave(&slow_work_queue_lock, flags);
-
-		if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags)))
-			goto cancelled;
-
-		/* we promise that we will not attempt to execute the work
-		 * function in more than one thread simultaneously
-		 *
-		 * this, however, leaves us with a problem if we're asked to
-		 * enqueue the work whilst someone is executing the work
-		 * function as simply queueing the work immediately means that
-		 * another thread may try executing it whilst it is already
-		 * under execution
-		 *
-		 * to deal with this, we set the ENQ_DEFERRED bit instead of
-		 * enqueueing, and the thread currently executing the work
-		 * function will enqueue the work item when the work function
-		 * returns and it has cleared the EXECUTING bit
-		 */
-		if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) {
-			set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags);
-		} else {
-			ret = slow_work_get_ref(work);
-			if (ret < 0)
-				goto failed;
-			slow_work_mark_time(work);
-			list_add_tail(&work->link, queue);
-			wake_up(&slow_work_thread_wq);
-
-			/* if someone who could be requeued is sleeping on a
-			 * thread, then ask them to yield their thread */
-			if (work->link.prev == queue)
-				wake_up(wfo_wq);
-		}
-
-		spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	}
-	return 0;
-
-cancelled:
-	ret = -ECANCELED;
-failed:
-	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(slow_work_enqueue);
-
-static int slow_work_wait(void *word)
-{
-	schedule();
-	return 0;
-}
-
-/**
- * slow_work_cancel - Cancel a slow work item
- * @work: The work item to cancel
- *
- * This function will cancel a previously enqueued work item. If we cannot
- * cancel the work item, it is guarenteed to have run when this function
- * returns.
- */
-void slow_work_cancel(struct slow_work *work)
-{
-	bool wait = true, put = false;
-
-	set_bit(SLOW_WORK_CANCELLING, &work->flags);
-	smp_mb();
-
-	/* if the work item is a delayed work item with an active timer, we
-	 * need to wait for the timer to finish _before_ getting the spinlock,
-	 * lest we deadlock against the timer routine
-	 *
-	 * the timer routine will leave DELAYED set if it notices the
-	 * CANCELLING flag in time
-	 */
-	if (test_bit(SLOW_WORK_DELAYED, &work->flags)) {
-		struct delayed_slow_work *dwork =
-			container_of(work, struct delayed_slow_work, work);
-		del_timer_sync(&dwork->timer);
-	}
-
-	spin_lock_irq(&slow_work_queue_lock);
-
-	if (test_bit(SLOW_WORK_DELAYED, &work->flags)) {
-		/* the timer routine aborted or never happened, so we are left
-		 * holding the timer's reference on the item and should just
-		 * drop the pending flag and wait for any ongoing execution to
-		 * finish */
-		struct delayed_slow_work *dwork =
-			container_of(work, struct delayed_slow_work, work);
-
-		BUG_ON(timer_pending(&dwork->timer));
-		BUG_ON(!list_empty(&work->link));
-
-		clear_bit(SLOW_WORK_DELAYED, &work->flags);
-		put = true;
-		clear_bit(SLOW_WORK_PENDING, &work->flags);
-
-	} else if (test_bit(SLOW_WORK_PENDING, &work->flags) &&
-		   !list_empty(&work->link)) {
-		/* the link in the pending queue holds a reference on the item
-		 * that we will need to release */
-		list_del_init(&work->link);
-		wait = false;
-		put = true;
-		clear_bit(SLOW_WORK_PENDING, &work->flags);
-
-	} else if (test_and_clear_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags)) {
-		/* the executor is holding our only reference on the item, so
-		 * we merely need to wait for it to finish executing */
-		clear_bit(SLOW_WORK_PENDING, &work->flags);
-	}
-
-	spin_unlock_irq(&slow_work_queue_lock);
-
-	/* the EXECUTING flag is set by the executor whilst the spinlock is set
-	 * and before the item is dequeued - so assuming the above doesn't
-	 * actually dequeue it, simply waiting for the EXECUTING flag to be
-	 * released here should be sufficient */
-	if (wait)
-		wait_on_bit(&work->flags, SLOW_WORK_EXECUTING, slow_work_wait,
-			    TASK_UNINTERRUPTIBLE);
-
-	clear_bit(SLOW_WORK_CANCELLING, &work->flags);
-	if (put)
-		slow_work_put_ref(work);
-}
-EXPORT_SYMBOL(slow_work_cancel);
-
-/*
- * Handle expiry of the delay timer, indicating that a delayed slow work item
- * should now be queued if not cancelled
- */
-static void delayed_slow_work_timer(unsigned long data)
-{
-	wait_queue_head_t *wfo_wq;
-	struct list_head *queue;
-	struct slow_work *work = (struct slow_work *) data;
-	unsigned long flags;
-	bool queued = false, put = false, first = false;
-
-	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
-		wfo_wq = &vslow_work_queue_waits_for_occupation;
-		queue = &vslow_work_queue;
-	} else {
-		wfo_wq = &slow_work_queue_waits_for_occupation;
-		queue = &slow_work_queue;
-	}
-
-	spin_lock_irqsave(&slow_work_queue_lock, flags);
-	if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) {
-		clear_bit(SLOW_WORK_DELAYED, &work->flags);
-
-		if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) {
-			/* we discard the reference the timer was holding in
-			 * favour of the one the executor holds */
-			set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags);
-			put = true;
-		} else {
-			slow_work_mark_time(work);
-			list_add_tail(&work->link, queue);
-			queued = true;
-			if (work->link.prev == queue)
-				first = true;
-		}
-	}
-
-	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	if (put)
-		slow_work_put_ref(work);
-	if (first)
-		wake_up(wfo_wq);
-	if (queued)
-		wake_up(&slow_work_thread_wq);
-}
-
-/**
- * delayed_slow_work_enqueue - Schedule a delayed slow work item for processing
- * @dwork: The delayed work item to queue
- * @delay: When to start executing the work, in jiffies from now
- *
- * This is similar to slow_work_enqueue(), but it adds a delay before the work
- * is actually queued for processing.
- *
- * The item can have delayed processing requested on it whilst it is being
- * executed.  The delay will begin immediately, and if it expires before the
- * item finishes executing, the item will be placed back on the queue when it
- * has done executing.
- */
-int delayed_slow_work_enqueue(struct delayed_slow_work *dwork,
-			      unsigned long delay)
-{
-	struct slow_work *work = &dwork->work;
-	unsigned long flags;
-	int ret;
-
-	if (delay == 0)
-		return slow_work_enqueue(&dwork->work);
-
-	BUG_ON(slow_work_user_count <= 0);
-	BUG_ON(!work);
-	BUG_ON(!work->ops);
-
-	if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
-		return -ECANCELED;
-
-	if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) {
-		spin_lock_irqsave(&slow_work_queue_lock, flags);
-
-		if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
-			goto cancelled;
-
-		/* the timer holds a reference whilst it is pending */
-		ret = slow_work_get_ref(work);
-		if (ret < 0)
-			goto cant_get_ref;
-
-		if (test_and_set_bit(SLOW_WORK_DELAYED, &work->flags))
-			BUG();
-		dwork->timer.expires = jiffies + delay;
-		dwork->timer.data = (unsigned long) work;
-		dwork->timer.function = delayed_slow_work_timer;
-		add_timer(&dwork->timer);
-
-		spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	}
-
-	return 0;
-
-cancelled:
-	ret = -ECANCELED;
-cant_get_ref:
-	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	return ret;
-}
-EXPORT_SYMBOL(delayed_slow_work_enqueue);
-
-/*
- * Schedule a cull of the thread pool at some time in the near future
- */
-static void slow_work_schedule_cull(void)
-{
-	mod_timer(&slow_work_cull_timer,
-		  round_jiffies(jiffies + SLOW_WORK_CULL_TIMEOUT));
-}
-
-/*
- * Worker thread culling algorithm
- */
-static bool slow_work_cull_thread(void)
-{
-	unsigned long flags;
-	bool do_cull = false;
-
-	spin_lock_irqsave(&slow_work_queue_lock, flags);
-
-	if (slow_work_cull) {
-		slow_work_cull = false;
-
-		if (list_empty(&slow_work_queue) &&
-		    list_empty(&vslow_work_queue) &&
-		    atomic_read(&slow_work_thread_count) >
-		    slow_work_min_threads) {
-			slow_work_schedule_cull();
-			do_cull = true;
-		}
-	}
-
-	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	return do_cull;
-}
-
-/*
- * Determine if there is slow work available for dispatch
- */
-static inline bool slow_work_available(int vsmax)
-{
-	return !list_empty(&slow_work_queue) ||
-		(!list_empty(&vslow_work_queue) &&
-		 atomic_read(&vslow_work_executing_count) < vsmax);
-}
-
-/*
- * Worker thread dispatcher
- */
-static int slow_work_thread(void *_data)
-{
-	int vsmax, id;
-
-	DEFINE_WAIT(wait);
-
-	set_freezable();
-	set_user_nice(current, -5);
-
-	/* allocate ourselves an ID */
-	spin_lock_irq(&slow_work_queue_lock);
-	id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT);
-	BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT);
-	__set_bit(id, slow_work_ids);
-	slow_work_set_thread_pid(id, current->pid);
-	spin_unlock_irq(&slow_work_queue_lock);
-
-	sprintf(current->comm, "kslowd%03u", id);
-
-	for (;;) {
-		vsmax = vslow_work_proportion;
-		vsmax *= atomic_read(&slow_work_thread_count);
-		vsmax /= 100;
-
-		prepare_to_wait_exclusive(&slow_work_thread_wq, &wait,
-					  TASK_INTERRUPTIBLE);
-		if (!freezing(current) &&
-		    !slow_work_threads_should_exit &&
-		    !slow_work_available(vsmax) &&
-		    !slow_work_cull)
-			schedule();
-		finish_wait(&slow_work_thread_wq, &wait);
-
-		try_to_freeze();
-
-		vsmax = vslow_work_proportion;
-		vsmax *= atomic_read(&slow_work_thread_count);
-		vsmax /= 100;
-
-		if (slow_work_available(vsmax) && slow_work_execute(id)) {
-			cond_resched();
-			if (list_empty(&slow_work_queue) &&
-			    list_empty(&vslow_work_queue) &&
-			    atomic_read(&slow_work_thread_count) >
-			    slow_work_min_threads)
-				slow_work_schedule_cull();
-			continue;
-		}
-
-		if (slow_work_threads_should_exit)
-			break;
-
-		if (slow_work_cull && slow_work_cull_thread())
-			break;
-	}
-
-	spin_lock_irq(&slow_work_queue_lock);
-	slow_work_set_thread_pid(id, 0);
-	__clear_bit(id, slow_work_ids);
-	spin_unlock_irq(&slow_work_queue_lock);
-
-	if (atomic_dec_and_test(&slow_work_thread_count))
-		complete_and_exit(&slow_work_last_thread_exited, 0);
-	return 0;
-}
-
-/*
- * Handle thread cull timer expiration
- */
-static void slow_work_cull_timeout(unsigned long data)
-{
-	slow_work_cull = true;
-	wake_up(&slow_work_thread_wq);
-}
-
-/*
- * Start a new slow work thread
- */
-static void slow_work_new_thread_execute(struct slow_work *work)
-{
-	struct task_struct *p;
-
-	if (slow_work_threads_should_exit)
-		return;
-
-	if (atomic_read(&slow_work_thread_count) >= slow_work_max_threads)
-		return;
-
-	if (!mutex_trylock(&slow_work_user_lock))
-		return;
-
-	slow_work_may_not_start_new_thread = true;
-	atomic_inc(&slow_work_thread_count);
-	p = kthread_run(slow_work_thread, NULL, "kslowd");
-	if (IS_ERR(p)) {
-		printk(KERN_DEBUG "Slow work thread pool: OOM\n");
-		if (atomic_dec_and_test(&slow_work_thread_count))
-			BUG(); /* we're running on a slow work thread... */
-		mod_timer(&slow_work_oom_timer,
-			  round_jiffies(jiffies + SLOW_WORK_OOM_TIMEOUT));
-	} else {
-		/* ratelimit the starting of new threads */
-		mod_timer(&slow_work_oom_timer, jiffies + 1);
-	}
-
-	mutex_unlock(&slow_work_user_lock);
-}
-
-static const struct slow_work_ops slow_work_new_thread_ops = {
-	.owner		= THIS_MODULE,
-	.execute	= slow_work_new_thread_execute,
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	.desc		= slow_work_new_thread_desc,
-#endif
-};
-
-/*
- * post-OOM new thread start suppression expiration
- */
-static void slow_work_oom_timeout(unsigned long data)
-{
-	slow_work_may_not_start_new_thread = false;
-}
-
-#ifdef CONFIG_SYSCTL
-/*
- * Handle adjustment of the minimum number of threads
- */
-static int slow_work_min_threads_sysctl(struct ctl_table *table, int write,
-					void __user *buffer,
-					size_t *lenp, loff_t *ppos)
-{
-	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-	int n;
-
-	if (ret == 0) {
-		mutex_lock(&slow_work_user_lock);
-		if (slow_work_user_count > 0) {
-			/* see if we need to start or stop threads */
-			n = atomic_read(&slow_work_thread_count) -
-				slow_work_min_threads;
-
-			if (n < 0 && !slow_work_may_not_start_new_thread)
-				slow_work_enqueue(&slow_work_new_thread);
-			else if (n > 0)
-				slow_work_schedule_cull();
-		}
-		mutex_unlock(&slow_work_user_lock);
-	}
-
-	return ret;
-}
-
-/*
- * Handle adjustment of the maximum number of threads
- */
-static int slow_work_max_threads_sysctl(struct ctl_table *table, int write,
-					void __user *buffer,
-					size_t *lenp, loff_t *ppos)
-{
-	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-	int n;
-
-	if (ret == 0) {
-		mutex_lock(&slow_work_user_lock);
-		if (slow_work_user_count > 0) {
-			/* see if we need to stop threads */
-			n = slow_work_max_threads -
-				atomic_read(&slow_work_thread_count);
-
-			if (n < 0)
-				slow_work_schedule_cull();
-		}
-		mutex_unlock(&slow_work_user_lock);
-	}
-
-	return ret;
-}
-#endif /* CONFIG_SYSCTL */
-
-/**
- * slow_work_register_user - Register a user of the facility
- * @module: The module about to make use of the facility
- *
- * Register a user of the facility, starting up the initial threads if there
- * aren't any other users at this point.  This will return 0 if successful, or
- * an error if not.
- */
-int slow_work_register_user(struct module *module)
-{
-	struct task_struct *p;
-	int loop;
-
-	mutex_lock(&slow_work_user_lock);
-
-	if (slow_work_user_count == 0) {
-		printk(KERN_NOTICE "Slow work thread pool: Starting up\n");
-		init_completion(&slow_work_last_thread_exited);
-
-		slow_work_threads_should_exit = false;
-		slow_work_init(&slow_work_new_thread,
-			       &slow_work_new_thread_ops);
-		slow_work_may_not_start_new_thread = false;
-		slow_work_cull = false;
-
-		/* start the minimum number of threads */
-		for (loop = 0; loop < slow_work_min_threads; loop++) {
-			atomic_inc(&slow_work_thread_count);
-			p = kthread_run(slow_work_thread, NULL, "kslowd");
-			if (IS_ERR(p))
-				goto error;
-		}
-		printk(KERN_NOTICE "Slow work thread pool: Ready\n");
-	}
-
-	slow_work_user_count++;
-	mutex_unlock(&slow_work_user_lock);
-	return 0;
-
-error:
-	if (atomic_dec_and_test(&slow_work_thread_count))
-		complete(&slow_work_last_thread_exited);
-	if (loop > 0) {
-		printk(KERN_ERR "Slow work thread pool:"
-		       " Aborting startup on ENOMEM\n");
-		slow_work_threads_should_exit = true;
-		wake_up_all(&slow_work_thread_wq);
-		wait_for_completion(&slow_work_last_thread_exited);
-		printk(KERN_ERR "Slow work thread pool: Aborted\n");
-	}
-	mutex_unlock(&slow_work_user_lock);
-	return PTR_ERR(p);
-}
-EXPORT_SYMBOL(slow_work_register_user);
-
-/*
- * wait for all outstanding items from the calling module to complete
- * - note that more items may be queued whilst we're waiting
- */
-static void slow_work_wait_for_items(struct module *module)
-{
-#ifdef CONFIG_MODULES
-	DECLARE_WAITQUEUE(myself, current);
-	struct slow_work *work;
-	int loop;
-
-	mutex_lock(&slow_work_unreg_sync_lock);
-	add_wait_queue(&slow_work_unreg_wq, &myself);
-
-	for (;;) {
-		spin_lock_irq(&slow_work_queue_lock);
-
-		/* first of all, we wait for the last queued item in each list
-		 * to be processed */
-		list_for_each_entry_reverse(work, &vslow_work_queue, link) {
-			if (work->owner == module) {
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				slow_work_unreg_work_item = work;
-				goto do_wait;
-			}
-		}
-		list_for_each_entry_reverse(work, &slow_work_queue, link) {
-			if (work->owner == module) {
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				slow_work_unreg_work_item = work;
-				goto do_wait;
-			}
-		}
-
-		/* then we wait for the items being processed to finish */
-		slow_work_unreg_module = module;
-		smp_mb();
-		for (loop = 0; loop < SLOW_WORK_THREAD_LIMIT; loop++) {
-			if (slow_work_thread_processing[loop] == module)
-				goto do_wait;
-		}
-		spin_unlock_irq(&slow_work_queue_lock);
-		break; /* okay, we're done */
-
-	do_wait:
-		spin_unlock_irq(&slow_work_queue_lock);
-		schedule();
-		slow_work_unreg_work_item = NULL;
-		slow_work_unreg_module = NULL;
-	}
-
-	remove_wait_queue(&slow_work_unreg_wq, &myself);
-	mutex_unlock(&slow_work_unreg_sync_lock);
-#endif /* CONFIG_MODULES */
-}
-
-/**
- * slow_work_unregister_user - Unregister a user of the facility
- * @module: The module whose items should be cleared
- *
- * Unregister a user of the facility, killing all the threads if this was the
- * last one.
- *
- * This waits for all the work items belonging to the nominated module to go
- * away before proceeding.
- */
-void slow_work_unregister_user(struct module *module)
-{
-	/* first of all, wait for all outstanding items from the calling module
-	 * to complete */
-	if (module)
-		slow_work_wait_for_items(module);
-
-	/* then we can actually go about shutting down the facility if need
-	 * be */
-	mutex_lock(&slow_work_user_lock);
-
-	BUG_ON(slow_work_user_count <= 0);
-
-	slow_work_user_count--;
-	if (slow_work_user_count == 0) {
-		printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
-		slow_work_threads_should_exit = true;
-		del_timer_sync(&slow_work_cull_timer);
-		del_timer_sync(&slow_work_oom_timer);
-		wake_up_all(&slow_work_thread_wq);
-		wait_for_completion(&slow_work_last_thread_exited);
-		printk(KERN_NOTICE "Slow work thread pool:"
-		       " Shut down complete\n");
-	}
-
-	mutex_unlock(&slow_work_user_lock);
-}
-EXPORT_SYMBOL(slow_work_unregister_user);
-
-/*
- * Initialise the slow work facility
- */
-static int __init init_slow_work(void)
-{
-	unsigned nr_cpus = num_possible_cpus();
-
-	if (slow_work_max_threads < nr_cpus)
-		slow_work_max_threads = nr_cpus;
-#ifdef CONFIG_SYSCTL
-	if (slow_work_max_max_threads < nr_cpus * 2)
-		slow_work_max_max_threads = nr_cpus * 2;
-#endif
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	{
-		struct dentry *dbdir;
-
-		dbdir = debugfs_create_dir("slow_work", NULL);
-		if (dbdir && !IS_ERR(dbdir))
-			debugfs_create_file("runqueue", S_IFREG | 0400, dbdir,
-					    NULL, &slow_work_runqueue_fops);
-	}
-#endif
-	return 0;
-}
-
-subsys_initcall(init_slow_work);
diff --git a/kernel/slow-work.h b/kernel/slow-work.h
deleted file mode 100644
index a29ebd1ef41..00000000000
--- a/kernel/slow-work.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* Slow work private definitions
- *
- * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#define SLOW_WORK_CULL_TIMEOUT (5 * HZ)	/* cull threads 5s after running out of
-					 * things to do */
-#define SLOW_WORK_OOM_TIMEOUT (5 * HZ)	/* can't start new threads for 5s after
-					 * OOM */
-
-#define SLOW_WORK_THREAD_LIMIT	255	/* abs maximum number of slow-work threads */
-
-/*
- * slow-work.c
- */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-extern struct slow_work *slow_work_execs[];
-extern pid_t slow_work_pids[];
-extern rwlock_t slow_work_execs_lock;
-#endif
-
-extern struct list_head slow_work_queue;
-extern struct list_head vslow_work_queue;
-extern spinlock_t slow_work_queue_lock;
-
-/*
- * slow-work-debugfs.c
- */
-#ifdef CONFIG_SLOW_WORK_DEBUG
-extern const struct file_operations slow_work_runqueue_fops;
-
-extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *);
-#endif
-
-/*
- * Helper functions
- */
-static inline void slow_work_set_thread_pid(int id, pid_t pid)
-{
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	slow_work_pids[id] = pid;
-#endif
-}
-
-static inline void slow_work_mark_time(struct slow_work *work)
-{
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	work->mark = CURRENT_TIME;
-#endif
-}
-
-static inline void slow_work_begin_exec(int id, struct slow_work *work)
-{
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	slow_work_execs[id] = work;
-#endif
-}
-
-static inline void slow_work_end_exec(int id, struct slow_work *work)
-{
-#ifdef CONFIG_SLOW_WORK_DEBUG
-	write_lock(&slow_work_execs_lock);
-	slow_work_execs[id] = NULL;
-	write_unlock(&slow_work_execs_lock);
-#endif
-}
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
deleted file mode 100644
index 4b493f67dcb..00000000000
--- a/kernel/softlockup.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Detect Soft Lockups
- *
- * started by Ingo Molnar, Copyright (C) 2005, 2006 Red Hat, Inc.
- *
- * this code detects soft lockups: incidents in where on a CPU
- * the kernel does not reschedule for 10 seconds or more.
- */
-#include <linux/mm.h>
-#include <linux/cpu.h>
-#include <linux/nmi.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/freezer.h>
-#include <linux/kthread.h>
-#include <linux/lockdep.h>
-#include <linux/notifier.h>
-#include <linux/module.h>
-#include <linux/sysctl.h>
-
-#include <asm/irq_regs.h>
-
-static DEFINE_SPINLOCK(print_lock);
-
-static DEFINE_PER_CPU(unsigned long, softlockup_touch_ts); /* touch timestamp */
-static DEFINE_PER_CPU(unsigned long, softlockup_print_ts); /* print timestamp */
-static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
-static DEFINE_PER_CPU(bool, softlock_touch_sync);
-
-static int __read_mostly did_panic;
-int __read_mostly softlockup_thresh = 60;
-
-/*
- * Should we panic (and reboot, if panic_timeout= is set) when a
- * soft-lockup occurs:
- */
-unsigned int __read_mostly softlockup_panic =
-				CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;
-
-static int __init softlockup_panic_setup(char *str)
-{
-	softlockup_panic = simple_strtoul(str, NULL, 0);
-
-	return 1;
-}
-__setup("softlockup_panic=", softlockup_panic_setup);
-
-static int
-softlock_panic(struct notifier_block *this, unsigned long event, void *ptr)
-{
-	did_panic = 1;
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
-	.notifier_call = softlock_panic,
-};
-
-/*
- * Returns seconds, approximately.  We don't need nanosecond
- * resolution, and we don't need to waste time with a big divide when
- * 2^30ns == 1.074s.
- */
-static unsigned long get_timestamp(int this_cpu)
-{
-	return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
-}
-
-static void __touch_softlockup_watchdog(void)
-{
-	int this_cpu = raw_smp_processor_id();
-
-	__raw_get_cpu_var(softlockup_touch_ts) = get_timestamp(this_cpu);
-}
-
-void touch_softlockup_watchdog(void)
-{
-	__raw_get_cpu_var(softlockup_touch_ts) = 0;
-}
-EXPORT_SYMBOL(touch_softlockup_watchdog);
-
-void touch_softlockup_watchdog_sync(void)
-{
-	__raw_get_cpu_var(softlock_touch_sync) = true;
-	__raw_get_cpu_var(softlockup_touch_ts) = 0;
-}
-
-void touch_all_softlockup_watchdogs(void)
-{
-	int cpu;
-
-	/* Cause each CPU to re-update its timestamp rather than complain */
-	for_each_online_cpu(cpu)
-		per_cpu(softlockup_touch_ts, cpu) = 0;
-}
-EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
-
-int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
-			     void __user *buffer,
-			     size_t *lenp, loff_t *ppos)
-{
-	touch_all_softlockup_watchdogs();
-	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
-}
-
-/*
- * This callback runs from the timer interrupt, and checks
- * whether the watchdog thread has hung or not:
- */
-void softlockup_tick(void)
-{
-	int this_cpu = smp_processor_id();
-	unsigned long touch_ts = per_cpu(softlockup_touch_ts, this_cpu);
-	unsigned long print_ts;
-	struct pt_regs *regs = get_irq_regs();
-	unsigned long now;
-
-	/* Is detection switched off? */
-	if (!per_cpu(softlockup_watchdog, this_cpu) || softlockup_thresh <= 0) {
-		/* Be sure we don't false trigger if switched back on */
-		if (touch_ts)
-			per_cpu(softlockup_touch_ts, this_cpu) = 0;
-		return;
-	}
-
-	if (touch_ts == 0) {
-		if (unlikely(per_cpu(softlock_touch_sync, this_cpu))) {
-			/*
-			 * If the time stamp was touched atomically
-			 * make sure the scheduler tick is up to date.
-			 */
-			per_cpu(softlock_touch_sync, this_cpu) = false;
-			sched_clock_tick();
-		}
-		__touch_softlockup_watchdog();
-		return;
-	}
-
-	print_ts = per_cpu(softlockup_print_ts, this_cpu);
-
-	/* report at most once a second */
-	if (print_ts == touch_ts || did_panic)
-		return;
-
-	/* do not print during early bootup: */
-	if (unlikely(system_state != SYSTEM_RUNNING)) {
-		__touch_softlockup_watchdog();
-		return;
-	}
-
-	now = get_timestamp(this_cpu);
-
-	/*
-	 * Wake up the high-prio watchdog task twice per
-	 * threshold timespan.
-	 */
-	if (time_after(now - softlockup_thresh/2, touch_ts))
-		wake_up_process(per_cpu(softlockup_watchdog, this_cpu));
-
-	/* Warn about unreasonable delays: */
-	if (time_before_eq(now - softlockup_thresh, touch_ts))
-		return;
-
-	per_cpu(softlockup_print_ts, this_cpu) = touch_ts;
-
-	spin_lock(&print_lock);
-	printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n",
-			this_cpu, now - touch_ts,
-			current->comm, task_pid_nr(current));
-	print_modules();
-	print_irqtrace_events(current);
-	if (regs)
-		show_regs(regs);
-	else
-		dump_stack();
-	spin_unlock(&print_lock);
-
-	if (softlockup_panic)
-		panic("softlockup: hung tasks");
-}
-
-/*
- * The watchdog thread - runs every second and touches the timestamp.
- */
-static int watchdog(void *__bind_cpu)
-{
-	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
-
-	sched_setscheduler(current, SCHED_FIFO, &param);
-
-	/* initialize timestamp */
-	__touch_softlockup_watchdog();
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	/*
-	 * Run briefly once per second to reset the softlockup timestamp.
-	 * If this gets delayed for more than 60 seconds then the
-	 * debug-printout triggers in softlockup_tick().
-	 */
-	while (!kthread_should_stop()) {
-		__touch_softlockup_watchdog();
-		schedule();
-
-		if (kthread_should_stop())
-			break;
-
-		set_current_state(TASK_INTERRUPTIBLE);
-	}
-	__set_current_state(TASK_RUNNING);
-
-	return 0;
-}
-
-/*
- * Create/destroy watchdog threads as CPUs come and go:
- */
-static int __cpuinit
-cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
-{
-	int hotcpu = (unsigned long)hcpu;
-	struct task_struct *p;
-
-	switch (action) {
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		BUG_ON(per_cpu(softlockup_watchdog, hotcpu));
-		p = kthread_create(watchdog, hcpu, "watchdog/%d", hotcpu);
-		if (IS_ERR(p)) {
-			printk(KERN_ERR "watchdog for %i failed\n", hotcpu);
-			return NOTIFY_BAD;
-		}
-		per_cpu(softlockup_touch_ts, hotcpu) = 0;
-		per_cpu(softlockup_watchdog, hotcpu) = p;
-		kthread_bind(p, hotcpu);
-		break;
-	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
-		wake_up_process(per_cpu(softlockup_watchdog, hotcpu));
-		break;
-#ifdef CONFIG_HOTPLUG_CPU
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
-		if (!per_cpu(softlockup_watchdog, hotcpu))
-			break;
-		/* Unbind so it can run.  Fall thru. */
-		kthread_bind(per_cpu(softlockup_watchdog, hotcpu),
-			     cpumask_any(cpu_online_mask));
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		p = per_cpu(softlockup_watchdog, hotcpu);
-		per_cpu(softlockup_watchdog, hotcpu) = NULL;
-		kthread_stop(p);
-		break;
-#endif /* CONFIG_HOTPLUG_CPU */
-	}
-	return NOTIFY_OK;
-}
-
-static struct notifier_block __cpuinitdata cpu_nfb = {
-	.notifier_call = cpu_callback
-};
-
-static int __initdata nosoftlockup;
-
-static int __init nosoftlockup_setup(char *str)
-{
-	nosoftlockup = 1;
-	return 1;
-}
-__setup("nosoftlockup", nosoftlockup_setup);
-
-static int __init spawn_softlockup_task(void)
-{
-	void *cpu = (void *)(long)smp_processor_id();
-	int err;
-
-	if (nosoftlockup)
-		return 0;
-
-	err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
-	if (err == NOTIFY_BAD) {
-		BUG();
-		return 1;
-	}
-	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
-	register_cpu_notifier(&cpu_nfb);
-
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
-	return 0;
-}
-early_initcall(spawn_softlockup_task);
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 70f8d90331e..4372ccb2512 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -35,9 +35,9 @@ struct cpu_stop_done {
 /* the actual stopper, one per every possible cpu, enabled on online cpus */
 struct cpu_stopper {
 	spinlock_t		lock;
+	bool			enabled;	/* is this stopper enabled? */
 	struct list_head	works;		/* list of pending works */
 	struct task_struct	*thread;	/* stopper thread */
-	bool			enabled;	/* is this stopper enabled? */
 };
 
 static DEFINE_PER_CPU(struct cpu_stopper, cpu_stopper);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index d24f761f487..6b005e4912b 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -50,10 +50,10 @@
 #include <linux/acpi.h>
 #include <linux/reboot.h>
 #include <linux/ftrace.h>
-#include <linux/slow-work.h>
 #include <linux/perf_event.h>
 #include <linux/kprobes.h>
 #include <linux/pipe_fs_i.h>
+#include <linux/oom.h>
 
 #include <asm/uaccess.h>
 #include <asm/processor.h>
@@ -76,15 +76,16 @@
 #include <scsi/sg.h>
 #endif
 
+#ifdef CONFIG_LOCKUP_DETECTOR
+#include <linux/nmi.h>
+#endif
+
 
 #if defined(CONFIG_SYSCTL)
 
 /* External variables not in a header file. */
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
-extern int sysctl_panic_on_oom;
-extern int sysctl_oom_kill_allocating_task;
-extern int sysctl_oom_dump_tasks;
 extern int max_threads;
 extern int core_uses_pid;
 extern int suid_dumpable;
@@ -106,7 +107,7 @@ extern int blk_iopoll_enabled;
 #endif
 
 /* Constants used for minimum and  maximum */
-#ifdef CONFIG_DETECT_SOFTLOCKUP
+#ifdef CONFIG_LOCKUP_DETECTOR
 static int sixty = 60;
 static int neg_one = -1;
 #endif
@@ -562,7 +563,7 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &one,
 	},
 #endif
-#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
+#ifdef CONFIG_HOTPLUG
 	{
 		.procname	= "hotplug",
 		.data		= &uevent_helper,
@@ -710,7 +711,34 @@ static struct ctl_table kern_table[] = {
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
 	},
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
+#if defined(CONFIG_LOCKUP_DETECTOR)
+	{
+		.procname       = "watchdog",
+		.data           = &watchdog_enabled,
+		.maxlen         = sizeof (int),
+		.mode           = 0644,
+		.proc_handler   = proc_dowatchdog_enabled,
+	},
+	{
+		.procname	= "watchdog_thresh",
+		.data		= &softlockup_thresh,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dowatchdog_thresh,
+		.extra1		= &neg_one,
+		.extra2		= &sixty,
+	},
+	{
+		.procname	= "softlockup_panic",
+		.data		= &softlockup_panic,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
+#endif
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
 	{
 		.procname       = "unknown_nmi_panic",
 		.data           = &unknown_nmi_panic,
@@ -813,26 +841,6 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= proc_dointvec,
 	},
 #endif
-#ifdef CONFIG_DETECT_SOFTLOCKUP
-	{
-		.procname	= "softlockup_panic",
-		.data		= &softlockup_panic,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &zero,
-		.extra2		= &one,
-	},
-	{
-		.procname	= "softlockup_thresh",
-		.data		= &softlockup_thresh,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dosoftlockup_thresh,
-		.extra1		= &neg_one,
-		.extra2		= &sixty,
-	},
-#endif
 #ifdef CONFIG_DETECT_HUNG_TASK
 	{
 		.procname	= "hung_task_panic",
@@ -906,13 +914,6 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= proc_dointvec,
 	},
 #endif
-#ifdef CONFIG_SLOW_WORK
-	{
-		.procname	= "slow-work",
-		.mode		= 0555,
-		.child		= slow_work_sysctls,
-	},
-#endif
 #ifdef CONFIG_PERF_EVENTS
 	{
 		.procname	= "perf_event_paranoid",
diff --git a/kernel/time.c b/kernel/time.c
index 848b1c2ab09..ba9b338d183 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -300,22 +300,6 @@ struct timespec timespec_trunc(struct timespec t, unsigned gran)
 }
 EXPORT_SYMBOL(timespec_trunc);
 
-#ifndef CONFIG_GENERIC_TIME
-/*
- * Simulate gettimeofday using do_gettimeofday which only allows a timeval
- * and therefore only yields usec accuracy
- */
-void getnstimeofday(struct timespec *tv)
-{
-	struct timeval x;
-
-	do_gettimeofday(&x);
-	tv->tv_sec = x.tv_sec;
-	tv->tv_nsec = x.tv_usec * NSEC_PER_USEC;
-}
-EXPORT_SYMBOL_GPL(getnstimeofday);
-#endif
-
 /* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
  * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
  * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index 95ed42951e0..f06a8a36564 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -6,7 +6,7 @@ config TICK_ONESHOT
 
 config NO_HZ
 	bool "Tickless System (Dynamic Ticks)"
-	depends on GENERIC_TIME && GENERIC_CLOCKEVENTS
+	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	help
 	  This option enables a tickless system: timer interrupts will
@@ -15,7 +15,7 @@ config NO_HZ
 
 config HIGH_RES_TIMERS
 	bool "High Resolution Timer Support"
-	depends on GENERIC_TIME && GENERIC_CLOCKEVENTS
+	depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	help
 	  This option enables high resolution timer support. If your
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index f08e99c1d56..c18d7efa1b4 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -531,7 +531,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
 	return max_nsecs - (max_nsecs >> 5);
 }
 
-#ifdef CONFIG_GENERIC_TIME
+#ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
 
 /**
  * clocksource_select - Select the best clocksource available
@@ -577,7 +577,7 @@ static void clocksource_select(void)
 	}
 }
 
-#else /* CONFIG_GENERIC_TIME */
+#else /* !CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 static inline void clocksource_select(void) { }
 
@@ -639,19 +639,18 @@ static void clocksource_enqueue(struct clocksource *cs)
 #define MAX_UPDATE_LENGTH 5 /* Seconds */
 
 /**
- * __clocksource_register_scale - Used to install new clocksources
+ * __clocksource_updatefreq_scale - Used update clocksource with new freq
  * @t:		clocksource to be registered
  * @scale:	Scale factor multiplied against freq to get clocksource hz
  * @freq:	clocksource frequency (cycles per second) divided by scale
  *
- * Returns -EBUSY if registration fails, zero otherwise.
+ * This should only be called from the clocksource->enable() method.
  *
  * This *SHOULD NOT* be called directly! Please use the
- * clocksource_register_hz() or clocksource_register_khz helper functions.
+ * clocksource_updatefreq_hz() or clocksource_updatefreq_khz helper functions.
  */
-int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
+void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
-
 	/*
 	 * Ideally we want to use  some of the limits used in
 	 * clocksource_max_deferment, to provide a more informed
@@ -662,7 +661,27 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 				      NSEC_PER_SEC/scale,
 				      MAX_UPDATE_LENGTH*scale);
 	cs->max_idle_ns = clocksource_max_deferment(cs);
+}
+EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
+
+/**
+ * __clocksource_register_scale - Used to install new clocksources
+ * @t:		clocksource to be registered
+ * @scale:	Scale factor multiplied against freq to get clocksource hz
+ * @freq:	clocksource frequency (cycles per second) divided by scale
+ *
+ * Returns -EBUSY if registration fails, zero otherwise.
+ *
+ * This *SHOULD NOT* be called directly! Please use the
+ * clocksource_register_hz() or clocksource_register_khz helper functions.
+ */
+int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
+{
+
+	/* Intialize mult/shift and max_idle_ns */
+	__clocksource_updatefreq_scale(cs, scale, freq);
 
+	/* Add clocksource to the clcoksource list */
 	mutex_lock(&clocksource_mutex);
 	clocksource_enqueue(cs);
 	clocksource_select();
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 813993b5fb6..3e216e01bbd 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -325,7 +325,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 	} while (read_seqretry(&xtime_lock, seq));
 
 	if (rcu_needs_cpu(cpu) || printk_needs_cpu(cpu) ||
-	    arch_needs_cpu(cpu) || nohz_ratelimit(cpu)) {
+	    arch_needs_cpu(cpu)) {
 		next_jiffies = last_jiffies + 1;
 		delta_jiffies = 1;
 	} else {
@@ -405,13 +405,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 		 * the scheduler tick in nohz_restart_sched_tick.
 		 */
 		if (!ts->tick_stopped) {
-			if (select_nohz_load_balancer(1)) {
-				/*
-				 * sched tick not stopped!
-				 */
-				cpumask_clear_cpu(cpu, nohz_cpu_mask);
-				goto out;
-			}
+			select_nohz_load_balancer(1);
 
 			ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
 			ts->tick_stopped = 1;
@@ -780,7 +774,6 @@ void tick_setup_sched_timer(void)
 {
 	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
 	ktime_t now = ktime_get();
-	u64 offset;
 
 	/*
 	 * Emulate tick processing via per-CPU hrtimers:
@@ -790,10 +783,6 @@ void tick_setup_sched_timer(void)
 
 	/* Get the next period (per cpu) */
 	hrtimer_set_expires(&ts->sched_timer, tick_init_jiffy_update());
-	offset = ktime_to_ns(tick_period) >> 1;
-	do_div(offset, num_possible_cpus());
-	offset *= smp_processor_id();
-	hrtimer_add_expires_ns(&ts->sched_timer, offset);
 
 	for (;;) {
 		hrtimer_forward(&ts->sched_timer, now, tick_period);
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index caf8d4d4f5c..e14c839e9fa 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -153,8 +153,8 @@ __cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
  * - wall_to_monotonic is no longer the boot time, getboottime must be
  * used instead.
  */
-struct timespec xtime __attribute__ ((aligned (16)));
-struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
+static struct timespec xtime __attribute__ ((aligned (16)));
+static struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
 static struct timespec total_sleep_time;
 
 /*
@@ -170,11 +170,10 @@ void timekeeping_leap_insert(int leapsecond)
 {
 	xtime.tv_sec += leapsecond;
 	wall_to_monotonic.tv_sec -= leapsecond;
-	update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult);
+	update_vsyscall(&xtime, &wall_to_monotonic, timekeeper.clock,
+			timekeeper.mult);
 }
 
-#ifdef CONFIG_GENERIC_TIME
-
 /**
  * timekeeping_forward_now - update clock to the current time
  *
@@ -328,7 +327,8 @@ int do_settimeofday(struct timespec *tv)
 	timekeeper.ntp_error = 0;
 	ntp_clear();
 
-	update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult);
+	update_vsyscall(&xtime, &wall_to_monotonic, timekeeper.clock,
+				timekeeper.mult);
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
@@ -376,52 +376,6 @@ void timekeeping_notify(struct clocksource *clock)
 	tick_clock_notify();
 }
 
-#else /* GENERIC_TIME */
-
-static inline void timekeeping_forward_now(void) { }
-
-/**
- * ktime_get - get the monotonic time in ktime_t format
- *
- * returns the time in ktime_t format
- */
-ktime_t ktime_get(void)
-{
-	struct timespec now;
-
-	ktime_get_ts(&now);
-
-	return timespec_to_ktime(now);
-}
-EXPORT_SYMBOL_GPL(ktime_get);
-
-/**
- * ktime_get_ts - get the monotonic clock in timespec format
- * @ts:		pointer to timespec variable
- *
- * The function calculates the monotonic clock from the realtime
- * clock and the wall_to_monotonic offset and stores the result
- * in normalized timespec format in the variable pointed to by @ts.
- */
-void ktime_get_ts(struct timespec *ts)
-{
-	struct timespec tomono;
-	unsigned long seq;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		getnstimeofday(ts);
-		tomono = wall_to_monotonic;
-
-	} while (read_seqretry(&xtime_lock, seq));
-
-	set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec,
-				ts->tv_nsec + tomono.tv_nsec);
-}
-EXPORT_SYMBOL_GPL(ktime_get_ts);
-
-#endif /* !GENERIC_TIME */
-
 /**
  * ktime_get_real - get the real (wall-) time in ktime_t format
  *
@@ -579,9 +533,9 @@ static int timekeeping_resume(struct sys_device *dev)
 
 	if (timespec_compare(&ts, &timekeeping_suspend_time) > 0) {
 		ts = timespec_sub(ts, timekeeping_suspend_time);
-		xtime = timespec_add_safe(xtime, ts);
+		xtime = timespec_add(xtime, ts);
 		wall_to_monotonic = timespec_sub(wall_to_monotonic, ts);
-		total_sleep_time = timespec_add_safe(total_sleep_time, ts);
+		total_sleep_time = timespec_add(total_sleep_time, ts);
 	}
 	/* re-base the last cycle value */
 	timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
@@ -784,10 +738,11 @@ void update_wall_time(void)
 		return;
 
 	clock = timekeeper.clock;
-#ifdef CONFIG_GENERIC_TIME
-	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
-#else
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	offset = timekeeper.cycle_interval;
+#else
+	offset = (clock->read(clock) - clock->cycle_last) & clock->mask;
 #endif
 	timekeeper.xtime_nsec = (s64)xtime.tv_nsec << timekeeper.shift;
 
@@ -856,7 +811,8 @@ void update_wall_time(void)
 	}
 
 	/* check to see if there is a new clocksource to use */
-	update_vsyscall(&xtime, timekeeper.clock, timekeeper.mult);
+	update_vsyscall(&xtime, &wall_to_monotonic, timekeeper.clock,
+				timekeeper.mult);
 }
 
 /**
@@ -887,7 +843,7 @@ EXPORT_SYMBOL_GPL(getboottime);
  */
 void monotonic_to_bootbased(struct timespec *ts)
 {
-	*ts = timespec_add_safe(*ts, total_sleep_time);
+	*ts = timespec_add(*ts, total_sleep_time);
 }
 EXPORT_SYMBOL_GPL(monotonic_to_bootbased);
 
@@ -902,6 +858,11 @@ struct timespec __current_kernel_time(void)
 	return xtime;
 }
 
+struct timespec __get_wall_to_monotonic(void)
+{
+	return wall_to_monotonic;
+}
+
 struct timespec current_kernel_time(void)
 {
 	struct timespec now;
diff --git a/kernel/timer.c b/kernel/timer.c
index efde11e197c..f1b8afe1ad8 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -90,8 +90,13 @@ static DEFINE_PER_CPU(struct tvec_base *, tvec_bases) = &boot_tvec_bases;
 
 /*
  * Note that all tvec_bases are 2 byte aligned and lower bit of
- * base in timer_list is guaranteed to be zero. Use the LSB for
- * the new flag to indicate whether the timer is deferrable
+ * base in timer_list is guaranteed to be zero. Use the LSB to
+ * indicate whether the timer is deferrable.
+ *
+ * A deferrable timer will work normally when the system is busy, but
+ * will not cause a CPU to come out of idle just to service it; instead,
+ * the timer will be serviced when the CPU eventually wakes up with a
+ * subsequent non-deferrable timer.
  */
 #define TBASE_DEFERRABLE_FLAG		(0x1)
 
@@ -692,12 +697,8 @@ __mod_timer(struct timer_list *timer, unsigned long expires,
 	cpu = smp_processor_id();
 
 #if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
-	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
-		int preferred_cpu = get_nohz_load_balancer();
-
-		if (preferred_cpu >= 0)
-			cpu = preferred_cpu;
-	}
+	if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu))
+		cpu = get_nohz_timer_target();
 #endif
 	new_base = per_cpu(tvec_bases, cpu);
 
@@ -1302,7 +1303,6 @@ void run_local_timers(void)
 {
 	hrtimer_run_queues();
 	raise_softirq(TIMER_SOFTIRQ);
-	softlockup_tick();
 }
 
 /*
@@ -1763,3 +1763,25 @@ unsigned long msleep_interruptible(unsigned int msecs)
 }
 
 EXPORT_SYMBOL(msleep_interruptible);
+
+static int __sched do_usleep_range(unsigned long min, unsigned long max)
+{
+	ktime_t kmin;
+	unsigned long delta;
+
+	kmin = ktime_set(0, min * NSEC_PER_USEC);
+	delta = (max - min) * NSEC_PER_USEC;
+	return schedule_hrtimeout_range(&kmin, delta, HRTIMER_MODE_REL);
+}
+
+/**
+ * usleep_range - Drop in replacement for udelay where wakeup is flexible
+ * @min: Minimum time in usecs to sleep
+ * @max: Maximum time in usecs to sleep
+ */
+void usleep_range(unsigned long min, unsigned long max)
+{
+	__set_current_state(TASK_UNINTERRUPTIBLE);
+	do_usleep_range(min, max);
+}
+EXPORT_SYMBOL(usleep_range);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 8b1797c4545..538501c6ea5 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -153,7 +153,7 @@ config IRQSOFF_TRACER
 	bool "Interrupts-off Latency Tracer"
 	default n
 	depends on TRACE_IRQFLAGS_SUPPORT
-	depends on GENERIC_TIME
+	depends on !ARCH_USES_GETTIMEOFFSET
 	select TRACE_IRQFLAGS
 	select GENERIC_TRACER
 	select TRACER_MAX_TRACE
@@ -175,7 +175,7 @@ config IRQSOFF_TRACER
 config PREEMPT_TRACER
 	bool "Preemption-off Latency Tracer"
 	default n
-	depends on GENERIC_TIME
+	depends on !ARCH_USES_GETTIMEOFFSET
 	depends on PREEMPT
 	select GENERIC_TRACER
 	select TRACER_MAX_TRACE
@@ -194,15 +194,6 @@ config PREEMPT_TRACER
 	  enabled. This option and the irqs-off timing option can be
 	  used together or separately.)
 
-config SYSPROF_TRACER
-	bool "Sysprof Tracer"
-	depends on X86
-	select GENERIC_TRACER
-	select CONTEXT_SWITCH_TRACER
-	help
-	  This tracer provides the trace needed by the 'Sysprof' userspace
-	  tool.
-
 config SCHED_TRACER
 	bool "Scheduling Latency Tracer"
 	select GENERIC_TRACER
@@ -229,23 +220,6 @@ config FTRACE_SYSCALLS
 	help
 	  Basic tracer to catch the syscall entry and exit events.
 
-config BOOT_TRACER
-	bool "Trace boot initcalls"
-	select GENERIC_TRACER
-	select CONTEXT_SWITCH_TRACER
-	help
-	  This tracer helps developers to optimize boot times: it records
-	  the timings of the initcalls and traces key events and the identity
-	  of tasks that can cause boot delays, such as context-switches.
-
-	  Its aim is to be parsed by the scripts/bootgraph.pl tool to
-	  produce pretty graphics about boot inefficiencies, giving a visual
-	  representation of the delays during initcalls - but the raw
-	  /debug/tracing/trace text output is readable too.
-
-	  You must pass in initcall_debug and ftrace=initcall to the kernel
-	  command line to enable this on bootup.
-
 config TRACE_BRANCH_PROFILING
 	bool
 	select GENERIC_TRACER
@@ -325,28 +299,6 @@ config BRANCH_TRACER
 
 	  Say N if unsure.
 
-config KSYM_TRACER
-	bool "Trace read and write access on kernel memory locations"
-	depends on HAVE_HW_BREAKPOINT
-	select TRACING
-	help
-	  This tracer helps find read and write operations on any given kernel
-	  symbol i.e. /proc/kallsyms.
-
-config PROFILE_KSYM_TRACER
-	bool "Profile all kernel memory accesses on 'watched' variables"
-	depends on KSYM_TRACER
-	help
-	  This tracer profiles kernel accesses on variables watched through the
-	  ksym tracer ftrace plugin. Depending upon the hardware, all read
-	  and write operations on kernel variables can be monitored for
-	  accesses.
-
-	  The results will be displayed in:
-	  /debugfs/tracing/profile_ksym
-
-	  Say N if unsure.
-
 config STACK_TRACER
 	bool "Trace max stack"
 	depends on HAVE_FUNCTION_TRACER
@@ -371,37 +323,6 @@ config STACK_TRACER
 
 	  Say N if unsure.
 
-config KMEMTRACE
-	bool "Trace SLAB allocations"
-	select GENERIC_TRACER
-	help
-	  kmemtrace provides tracing for slab allocator functions, such as
-	  kmalloc, kfree, kmem_cache_alloc, kmem_cache_free, etc. Collected
-	  data is then fed to the userspace application in order to analyse
-	  allocation hotspots, internal fragmentation and so on, making it
-	  possible to see how well an allocator performs, as well as debug
-	  and profile kernel code.
-
-	  This requires an userspace application to use. See
-	  Documentation/trace/kmemtrace.txt for more information.
-
-	  Saying Y will make the kernel somewhat larger and slower. However,
-	  if you disable kmemtrace at run-time or boot-time, the performance
-	  impact is minimal (depending on the arch the kernel is built for).
-
-	  If unsure, say N.
-
-config WORKQUEUE_TRACER
-	bool "Trace workqueues"
-	select GENERIC_TRACER
-	help
-	  The workqueue tracer provides some statistical information
-          about each cpu workqueue thread such as the number of the
-          works inserted and executed since their creation. It can help
-          to evaluate the amount of work each of them has to perform.
-          For example it can help a developer to decide whether he should
-          choose a per-cpu workqueue instead of a singlethreaded one.
-
 config BLK_DEV_IO_TRACE
 	bool "Support for tracing block IO actions"
 	depends on SYSFS
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index ffb1a5b0550..53f338190b2 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_TRACING) += trace_output.o
 obj-$(CONFIG_TRACING) += trace_stat.o
 obj-$(CONFIG_TRACING) += trace_printk.o
 obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o
-obj-$(CONFIG_SYSPROF_TRACER) += trace_sysprof.o
 obj-$(CONFIG_FUNCTION_TRACER) += trace_functions.o
 obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o
 obj-$(CONFIG_PREEMPT_TRACER) += trace_irqsoff.o
@@ -38,10 +37,8 @@ obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o
 obj-$(CONFIG_NOP_TRACER) += trace_nop.o
 obj-$(CONFIG_STACK_TRACER) += trace_stack.o
 obj-$(CONFIG_MMIOTRACE) += trace_mmiotrace.o
-obj-$(CONFIG_BOOT_TRACER) += trace_boot.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += trace_functions_graph.o
 obj-$(CONFIG_TRACE_BRANCH_PROFILING) += trace_branch.o
-obj-$(CONFIG_KMEMTRACE) += kmemtrace.o
 obj-$(CONFIG_WORKQUEUE_TRACER) += trace_workqueue.o
 obj-$(CONFIG_BLK_DEV_IO_TRACE) += blktrace.o
 ifeq ($(CONFIG_BLOCK),y)
@@ -55,7 +52,9 @@ obj-$(CONFIG_EVENT_TRACING) += trace_event_perf.o
 endif
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 obj-$(CONFIG_KPROBE_EVENT) += trace_kprobe.o
-obj-$(CONFIG_KSYM_TRACER) += trace_ksym.o
 obj-$(CONFIG_EVENT_TRACING) += power-traces.o
+ifeq ($(CONFIG_TRACING),y)
+obj-$(CONFIG_KGDB_KDB) += trace_kdb.o
+endif
 
 libftrace-y := ftrace.o
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 6d2cb14f944..0d88ce9b9fb 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1883,7 +1883,6 @@ function_trace_probe_call(unsigned long ip, unsigned long parent_ip)
 	struct hlist_head *hhd;
 	struct hlist_node *n;
 	unsigned long key;
-	int resched;
 
 	key = hash_long(ip, FTRACE_HASH_BITS);
 
@@ -1897,12 +1896,12 @@ function_trace_probe_call(unsigned long ip, unsigned long parent_ip)
 	 * period. This syncs the hash iteration and freeing of items
 	 * on the hash. rcu_read_lock is too dangerous here.
 	 */
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 	hlist_for_each_entry_rcu(entry, n, hhd, node) {
 		if (entry->ip == ip)
 			entry->ops->func(ip, parent_ip, &entry->data);
 	}
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 }
 
 static struct ftrace_ops trace_probe_ops __read_mostly =
diff --git a/kernel/trace/kmemtrace.c b/kernel/trace/kmemtrace.c
deleted file mode 100644
index bbfc1bb1660..00000000000
--- a/kernel/trace/kmemtrace.c
+++ /dev/null
@@ -1,529 +0,0 @@
-/*
- * Memory allocator tracing
- *
- * Copyright (C) 2008 Eduard - Gabriel Munteanu
- * Copyright (C) 2008 Pekka Enberg <penberg@cs.helsinki.fi>
- * Copyright (C) 2008 Frederic Weisbecker <fweisbec@gmail.com>
- */
-
-#include <linux/tracepoint.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/dcache.h>
-#include <linux/fs.h>
-
-#include <linux/kmemtrace.h>
-
-#include "trace_output.h"
-#include "trace.h"
-
-/* Select an alternative, minimalistic output than the original one */
-#define TRACE_KMEM_OPT_MINIMAL	0x1
-
-static struct tracer_opt kmem_opts[] = {
-	/* Default disable the minimalistic output */
-	{ TRACER_OPT(kmem_minimalistic, TRACE_KMEM_OPT_MINIMAL) },
-	{ }
-};
-
-static struct tracer_flags kmem_tracer_flags = {
-	.val			= 0,
-	.opts			= kmem_opts
-};
-
-static struct trace_array *kmemtrace_array;
-
-/* Trace allocations */
-static inline void kmemtrace_alloc(enum kmemtrace_type_id type_id,
-				   unsigned long call_site,
-				   const void *ptr,
-				   size_t bytes_req,
-				   size_t bytes_alloc,
-				   gfp_t gfp_flags,
-				   int node)
-{
-	struct ftrace_event_call *call = &event_kmem_alloc;
-	struct trace_array *tr = kmemtrace_array;
-	struct kmemtrace_alloc_entry *entry;
-	struct ring_buffer_event *event;
-
-	event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry));
-	if (!event)
-		return;
-
-	entry = ring_buffer_event_data(event);
-	tracing_generic_entry_update(&entry->ent, 0, 0);
-
-	entry->ent.type		= TRACE_KMEM_ALLOC;
-	entry->type_id		= type_id;
-	entry->call_site	= call_site;
-	entry->ptr		= ptr;
-	entry->bytes_req	= bytes_req;
-	entry->bytes_alloc	= bytes_alloc;
-	entry->gfp_flags	= gfp_flags;
-	entry->node		= node;
-
-	if (!filter_check_discard(call, entry, tr->buffer, event))
-		ring_buffer_unlock_commit(tr->buffer, event);
-
-	trace_wake_up();
-}
-
-static inline void kmemtrace_free(enum kmemtrace_type_id type_id,
-				  unsigned long call_site,
-				  const void *ptr)
-{
-	struct ftrace_event_call *call = &event_kmem_free;
-	struct trace_array *tr = kmemtrace_array;
-	struct kmemtrace_free_entry *entry;
-	struct ring_buffer_event *event;
-
-	event = ring_buffer_lock_reserve(tr->buffer, sizeof(*entry));
-	if (!event)
-		return;
-	entry	= ring_buffer_event_data(event);
-	tracing_generic_entry_update(&entry->ent, 0, 0);
-
-	entry->ent.type		= TRACE_KMEM_FREE;
-	entry->type_id		= type_id;
-	entry->call_site	= call_site;
-	entry->ptr		= ptr;
-
-	if (!filter_check_discard(call, entry, tr->buffer, event))
-		ring_buffer_unlock_commit(tr->buffer, event);
-
-	trace_wake_up();
-}
-
-static void kmemtrace_kmalloc(void *ignore,
-			      unsigned long call_site,
-			      const void *ptr,
-			      size_t bytes_req,
-			      size_t bytes_alloc,
-			      gfp_t gfp_flags)
-{
-	kmemtrace_alloc(KMEMTRACE_TYPE_KMALLOC, call_site, ptr,
-			bytes_req, bytes_alloc, gfp_flags, -1);
-}
-
-static void kmemtrace_kmem_cache_alloc(void *ignore,
-				       unsigned long call_site,
-				       const void *ptr,
-				       size_t bytes_req,
-				       size_t bytes_alloc,
-				       gfp_t gfp_flags)
-{
-	kmemtrace_alloc(KMEMTRACE_TYPE_CACHE, call_site, ptr,
-			bytes_req, bytes_alloc, gfp_flags, -1);
-}
-
-static void kmemtrace_kmalloc_node(void *ignore,
-				   unsigned long call_site,
-				   const void *ptr,
-				   size_t bytes_req,
-				   size_t bytes_alloc,
-				   gfp_t gfp_flags,
-				   int node)
-{
-	kmemtrace_alloc(KMEMTRACE_TYPE_KMALLOC, call_site, ptr,
-			bytes_req, bytes_alloc, gfp_flags, node);
-}
-
-static void kmemtrace_kmem_cache_alloc_node(void *ignore,
-					    unsigned long call_site,
-					    const void *ptr,
-					    size_t bytes_req,
-					    size_t bytes_alloc,
-					    gfp_t gfp_flags,
-					    int node)
-{
-	kmemtrace_alloc(KMEMTRACE_TYPE_CACHE, call_site, ptr,
-			bytes_req, bytes_alloc, gfp_flags, node);
-}
-
-static void
-kmemtrace_kfree(void *ignore, unsigned long call_site, const void *ptr)
-{
-	kmemtrace_free(KMEMTRACE_TYPE_KMALLOC, call_site, ptr);
-}
-
-static void kmemtrace_kmem_cache_free(void *ignore,
-				      unsigned long call_site, const void *ptr)
-{
-	kmemtrace_free(KMEMTRACE_TYPE_CACHE, call_site, ptr);
-}
-
-static int kmemtrace_start_probes(void)
-{
-	int err;
-
-	err = register_trace_kmalloc(kmemtrace_kmalloc, NULL);
-	if (err)
-		return err;
-	err = register_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc, NULL);
-	if (err)
-		return err;
-	err = register_trace_kmalloc_node(kmemtrace_kmalloc_node, NULL);
-	if (err)
-		return err;
-	err = register_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node, NULL);
-	if (err)
-		return err;
-	err = register_trace_kfree(kmemtrace_kfree, NULL);
-	if (err)
-		return err;
-	err = register_trace_kmem_cache_free(kmemtrace_kmem_cache_free, NULL);
-
-	return err;
-}
-
-static void kmemtrace_stop_probes(void)
-{
-	unregister_trace_kmalloc(kmemtrace_kmalloc, NULL);
-	unregister_trace_kmem_cache_alloc(kmemtrace_kmem_cache_alloc, NULL);
-	unregister_trace_kmalloc_node(kmemtrace_kmalloc_node, NULL);
-	unregister_trace_kmem_cache_alloc_node(kmemtrace_kmem_cache_alloc_node, NULL);
-	unregister_trace_kfree(kmemtrace_kfree, NULL);
-	unregister_trace_kmem_cache_free(kmemtrace_kmem_cache_free, NULL);
-}
-
-static int kmem_trace_init(struct trace_array *tr)
-{
-	kmemtrace_array = tr;
-
-	tracing_reset_online_cpus(tr);
-
-	kmemtrace_start_probes();
-
-	return 0;
-}
-
-static void kmem_trace_reset(struct trace_array *tr)
-{
-	kmemtrace_stop_probes();
-}
-
-static void kmemtrace_headers(struct seq_file *s)
-{
-	/* Don't need headers for the original kmemtrace output */
-	if (!(kmem_tracer_flags.val & TRACE_KMEM_OPT_MINIMAL))
-		return;
-
-	seq_printf(s, "#\n");
-	seq_printf(s, "# ALLOC  TYPE  REQ   GIVEN  FLAGS     "
-			"      POINTER         NODE    CALLER\n");
-	seq_printf(s, "# FREE   |      |     |       |       "
-			"       |   |            |        |\n");
-	seq_printf(s, "# |\n\n");
-}
-
-/*
- * The following functions give the original output from kmemtrace,
- * plus the origin CPU, since reordering occurs in-kernel now.
- */
-
-#define KMEMTRACE_USER_ALLOC	0
-#define KMEMTRACE_USER_FREE	1
-
-struct kmemtrace_user_event {
-	u8			event_id;
-	u8			type_id;
-	u16			event_size;
-	u32			cpu;
-	u64			timestamp;
-	unsigned long		call_site;
-	unsigned long		ptr;
-};
-
-struct kmemtrace_user_event_alloc {
-	size_t			bytes_req;
-	size_t			bytes_alloc;
-	unsigned		gfp_flags;
-	int			node;
-};
-
-static enum print_line_t
-kmemtrace_print_alloc(struct trace_iterator *iter, int flags,
-		      struct trace_event *event)
-{
-	struct trace_seq *s = &iter->seq;
-	struct kmemtrace_alloc_entry *entry;
-	int ret;
-
-	trace_assign_type(entry, iter->ent);
-
-	ret = trace_seq_printf(s, "type_id %d call_site %pF ptr %lu "
-	    "bytes_req %lu bytes_alloc %lu gfp_flags %lu node %d\n",
-	    entry->type_id, (void *)entry->call_site, (unsigned long)entry->ptr,
-	    (unsigned long)entry->bytes_req, (unsigned long)entry->bytes_alloc,
-	    (unsigned long)entry->gfp_flags, entry->node);
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t
-kmemtrace_print_free(struct trace_iterator *iter, int flags,
-		     struct trace_event *event)
-{
-	struct trace_seq *s = &iter->seq;
-	struct kmemtrace_free_entry *entry;
-	int ret;
-
-	trace_assign_type(entry, iter->ent);
-
-	ret = trace_seq_printf(s, "type_id %d call_site %pF ptr %lu\n",
-			       entry->type_id, (void *)entry->call_site,
-			       (unsigned long)entry->ptr);
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t
-kmemtrace_print_alloc_user(struct trace_iterator *iter, int flags,
-			   struct trace_event *event)
-{
-	struct trace_seq *s = &iter->seq;
-	struct kmemtrace_alloc_entry *entry;
-	struct kmemtrace_user_event *ev;
-	struct kmemtrace_user_event_alloc *ev_alloc;
-
-	trace_assign_type(entry, iter->ent);
-
-	ev = trace_seq_reserve(s, sizeof(*ev));
-	if (!ev)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	ev->event_id		= KMEMTRACE_USER_ALLOC;
-	ev->type_id		= entry->type_id;
-	ev->event_size		= sizeof(*ev) + sizeof(*ev_alloc);
-	ev->cpu			= iter->cpu;
-	ev->timestamp		= iter->ts;
-	ev->call_site		= entry->call_site;
-	ev->ptr			= (unsigned long)entry->ptr;
-
-	ev_alloc = trace_seq_reserve(s, sizeof(*ev_alloc));
-	if (!ev_alloc)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	ev_alloc->bytes_req	= entry->bytes_req;
-	ev_alloc->bytes_alloc	= entry->bytes_alloc;
-	ev_alloc->gfp_flags	= entry->gfp_flags;
-	ev_alloc->node		= entry->node;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t
-kmemtrace_print_free_user(struct trace_iterator *iter, int flags,
-			  struct trace_event *event)
-{
-	struct trace_seq *s = &iter->seq;
-	struct kmemtrace_free_entry *entry;
-	struct kmemtrace_user_event *ev;
-
-	trace_assign_type(entry, iter->ent);
-
-	ev = trace_seq_reserve(s, sizeof(*ev));
-	if (!ev)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	ev->event_id		= KMEMTRACE_USER_FREE;
-	ev->type_id		= entry->type_id;
-	ev->event_size		= sizeof(*ev);
-	ev->cpu			= iter->cpu;
-	ev->timestamp		= iter->ts;
-	ev->call_site		= entry->call_site;
-	ev->ptr			= (unsigned long)entry->ptr;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-/* The two other following provide a more minimalistic output */
-static enum print_line_t
-kmemtrace_print_alloc_compress(struct trace_iterator *iter)
-{
-	struct kmemtrace_alloc_entry *entry;
-	struct trace_seq *s = &iter->seq;
-	int ret;
-
-	trace_assign_type(entry, iter->ent);
-
-	/* Alloc entry */
-	ret = trace_seq_printf(s, "  +      ");
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Type */
-	switch (entry->type_id) {
-	case KMEMTRACE_TYPE_KMALLOC:
-		ret = trace_seq_printf(s, "K   ");
-		break;
-	case KMEMTRACE_TYPE_CACHE:
-		ret = trace_seq_printf(s, "C   ");
-		break;
-	case KMEMTRACE_TYPE_PAGES:
-		ret = trace_seq_printf(s, "P   ");
-		break;
-	default:
-		ret = trace_seq_printf(s, "?   ");
-	}
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Requested */
-	ret = trace_seq_printf(s, "%4zu   ", entry->bytes_req);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Allocated */
-	ret = trace_seq_printf(s, "%4zu   ", entry->bytes_alloc);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Flags
-	 * TODO: would be better to see the name of the GFP flag names
-	 */
-	ret = trace_seq_printf(s, "%08x   ", entry->gfp_flags);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Pointer to allocated */
-	ret = trace_seq_printf(s, "0x%tx   ", (ptrdiff_t)entry->ptr);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Node and call site*/
-	ret = trace_seq_printf(s, "%4d   %pf\n", entry->node,
-						 (void *)entry->call_site);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t
-kmemtrace_print_free_compress(struct trace_iterator *iter)
-{
-	struct kmemtrace_free_entry *entry;
-	struct trace_seq *s = &iter->seq;
-	int ret;
-
-	trace_assign_type(entry, iter->ent);
-
-	/* Free entry */
-	ret = trace_seq_printf(s, "  -      ");
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Type */
-	switch (entry->type_id) {
-	case KMEMTRACE_TYPE_KMALLOC:
-		ret = trace_seq_printf(s, "K     ");
-		break;
-	case KMEMTRACE_TYPE_CACHE:
-		ret = trace_seq_printf(s, "C     ");
-		break;
-	case KMEMTRACE_TYPE_PAGES:
-		ret = trace_seq_printf(s, "P     ");
-		break;
-	default:
-		ret = trace_seq_printf(s, "?     ");
-	}
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Skip requested/allocated/flags */
-	ret = trace_seq_printf(s, "                       ");
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Pointer to allocated */
-	ret = trace_seq_printf(s, "0x%tx   ", (ptrdiff_t)entry->ptr);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	/* Skip node and print call site*/
-	ret = trace_seq_printf(s, "       %pf\n", (void *)entry->call_site);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t kmemtrace_print_line(struct trace_iterator *iter)
-{
-	struct trace_entry *entry = iter->ent;
-
-	if (!(kmem_tracer_flags.val & TRACE_KMEM_OPT_MINIMAL))
-		return TRACE_TYPE_UNHANDLED;
-
-	switch (entry->type) {
-	case TRACE_KMEM_ALLOC:
-		return kmemtrace_print_alloc_compress(iter);
-	case TRACE_KMEM_FREE:
-		return kmemtrace_print_free_compress(iter);
-	default:
-		return TRACE_TYPE_UNHANDLED;
-	}
-}
-
-static struct trace_event_functions kmem_trace_alloc_funcs = {
-	.trace			= kmemtrace_print_alloc,
-	.binary			= kmemtrace_print_alloc_user,
-};
-
-static struct trace_event kmem_trace_alloc = {
-	.type			= TRACE_KMEM_ALLOC,
-	.funcs			= &kmem_trace_alloc_funcs,
-};
-
-static struct trace_event_functions kmem_trace_free_funcs = {
-	.trace			= kmemtrace_print_free,
-	.binary			= kmemtrace_print_free_user,
-};
-
-static struct trace_event kmem_trace_free = {
-	.type			= TRACE_KMEM_FREE,
-	.funcs			= &kmem_trace_free_funcs,
-};
-
-static struct tracer kmem_tracer __read_mostly = {
-	.name			= "kmemtrace",
-	.init			= kmem_trace_init,
-	.reset			= kmem_trace_reset,
-	.print_line		= kmemtrace_print_line,
-	.print_header		= kmemtrace_headers,
-	.flags			= &kmem_tracer_flags
-};
-
-void kmemtrace_init(void)
-{
-	/* earliest opportunity to start kmem tracing */
-}
-
-static int __init init_kmem_tracer(void)
-{
-	if (!register_ftrace_event(&kmem_trace_alloc)) {
-		pr_warning("Warning: could not register kmem events\n");
-		return 1;
-	}
-
-	if (!register_ftrace_event(&kmem_trace_free)) {
-		pr_warning("Warning: could not register kmem events\n");
-		return 1;
-	}
-
-	if (register_tracer(&kmem_tracer) != 0) {
-		pr_warning("Warning: could not register the kmem tracer\n");
-		return 1;
-	}
-
-	return 0;
-}
-device_initcall(init_kmem_tracer);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 1da7b6ea8b8..3632ce87674 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -443,6 +443,7 @@ int ring_buffer_print_page_header(struct trace_seq *s)
  */
 struct ring_buffer_per_cpu {
 	int				cpu;
+	atomic_t			record_disabled;
 	struct ring_buffer		*buffer;
 	spinlock_t			reader_lock;	/* serialize readers */
 	arch_spinlock_t			lock;
@@ -462,7 +463,6 @@ struct ring_buffer_per_cpu {
 	unsigned long			read;
 	u64				write_stamp;
 	u64				read_stamp;
-	atomic_t			record_disabled;
 };
 
 struct ring_buffer {
@@ -2242,8 +2242,6 @@ static void trace_recursive_unlock(void)
 
 #endif
 
-static DEFINE_PER_CPU(int, rb_need_resched);
-
 /**
  * ring_buffer_lock_reserve - reserve a part of the buffer
  * @buffer: the ring buffer to reserve from
@@ -2264,13 +2262,13 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 {
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event;
-	int cpu, resched;
+	int cpu;
 
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return NULL;
 
 	/* If we are tracing schedule, we don't want to recurse */
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 
 	if (atomic_read(&buffer->record_disabled))
 		goto out_nocheck;
@@ -2295,21 +2293,13 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	if (!event)
 		goto out;
 
-	/*
-	 * Need to store resched state on this cpu.
-	 * Only the first needs to.
-	 */
-
-	if (preempt_count() == 1)
-		per_cpu(rb_need_resched, cpu) = resched;
-
 	return event;
 
  out:
 	trace_recursive_unlock();
 
  out_nocheck:
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve);
@@ -2355,13 +2345,7 @@ int ring_buffer_unlock_commit(struct ring_buffer *buffer,
 
 	trace_recursive_unlock();
 
-	/*
-	 * Only the last preempt count needs to restore preemption.
-	 */
-	if (preempt_count() == 1)
-		ftrace_preempt_enable(per_cpu(rb_need_resched, cpu));
-	else
-		preempt_enable_no_resched_notrace();
+	preempt_enable_notrace();
 
 	return 0;
 }
@@ -2469,13 +2453,7 @@ void ring_buffer_discard_commit(struct ring_buffer *buffer,
 
 	trace_recursive_unlock();
 
-	/*
-	 * Only the last preempt count needs to restore preemption.
-	 */
-	if (preempt_count() == 1)
-		ftrace_preempt_enable(per_cpu(rb_need_resched, cpu));
-	else
-		preempt_enable_no_resched_notrace();
+	preempt_enable_notrace();
 
 }
 EXPORT_SYMBOL_GPL(ring_buffer_discard_commit);
@@ -2501,12 +2479,12 @@ int ring_buffer_write(struct ring_buffer *buffer,
 	struct ring_buffer_event *event;
 	void *body;
 	int ret = -EBUSY;
-	int cpu, resched;
+	int cpu;
 
 	if (ring_buffer_flags != RB_BUFFERS_ON)
 		return -EBUSY;
 
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 
 	if (atomic_read(&buffer->record_disabled))
 		goto out;
@@ -2536,7 +2514,7 @@ int ring_buffer_write(struct ring_buffer *buffer,
 
 	ret = 0;
  out:
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 
 	return ret;
 }
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 086d3631680..ba14a22be4c 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -101,10 +101,7 @@ static inline void ftrace_enable_cpu(void)
 	preempt_enable();
 }
 
-static cpumask_var_t __read_mostly	tracing_buffer_mask;
-
-#define for_each_tracing_cpu(cpu)	\
-	for_each_cpu(cpu, tracing_buffer_mask)
+cpumask_var_t __read_mostly	tracing_buffer_mask;
 
 /*
  * ftrace_dump_on_oops - variable to dump ftrace buffer on oops
@@ -344,7 +341,7 @@ static DECLARE_WAIT_QUEUE_HEAD(trace_wait);
 /* trace_flags holds trace_options default values */
 unsigned long trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_PRINTK |
 	TRACE_ITER_ANNOTATE | TRACE_ITER_CONTEXT_INFO | TRACE_ITER_SLEEP_TIME |
-	TRACE_ITER_GRAPH_TIME;
+	TRACE_ITER_GRAPH_TIME | TRACE_ITER_RECORD_CMD;
 
 static int trace_stop_count;
 static DEFINE_SPINLOCK(tracing_start_lock);
@@ -428,6 +425,7 @@ static const char *trace_options[] = {
 	"latency-format",
 	"sleep-time",
 	"graph-time",
+	"record-cmd",
 	NULL
 };
 
@@ -659,6 +657,10 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu)
 		return;
 
 	WARN_ON_ONCE(!irqs_disabled());
+	if (!current_trace->use_max_tr) {
+		WARN_ON_ONCE(1);
+		return;
+	}
 	arch_spin_lock(&ftrace_max_lock);
 
 	tr->buffer = max_tr.buffer;
@@ -685,6 +687,11 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu)
 		return;
 
 	WARN_ON_ONCE(!irqs_disabled());
+	if (!current_trace->use_max_tr) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
 	arch_spin_lock(&ftrace_max_lock);
 
 	ftrace_disable_cpu();
@@ -729,18 +736,11 @@ __acquires(kernel_lock)
 		return -1;
 	}
 
-	if (strlen(type->name) > MAX_TRACER_SIZE) {
+	if (strlen(type->name) >= MAX_TRACER_SIZE) {
 		pr_info("Tracer has a name longer than %d\n", MAX_TRACER_SIZE);
 		return -1;
 	}
 
-	/*
-	 * When this gets called we hold the BKL which means that
-	 * preemption is disabled. Various trace selftests however
-	 * need to disable and enable preemption for successful tests.
-	 * So we drop the BKL here and grab it after the tests again.
-	 */
-	unlock_kernel();
 	mutex_lock(&trace_types_lock);
 
 	tracing_selftest_running = true;
@@ -822,7 +822,6 @@ __acquires(kernel_lock)
 #endif
 
  out_unlock:
-	lock_kernel();
 	return ret;
 }
 
@@ -1331,61 +1330,6 @@ static void __trace_userstack(struct trace_array *tr, unsigned long flags)
 
 #endif /* CONFIG_STACKTRACE */
 
-static void
-ftrace_trace_special(void *__tr,
-		     unsigned long arg1, unsigned long arg2, unsigned long arg3,
-		     int pc)
-{
-	struct ftrace_event_call *call = &event_special;
-	struct ring_buffer_event *event;
-	struct trace_array *tr = __tr;
-	struct ring_buffer *buffer = tr->buffer;
-	struct special_entry *entry;
-
-	event = trace_buffer_lock_reserve(buffer, TRACE_SPECIAL,
-					  sizeof(*entry), 0, pc);
-	if (!event)
-		return;
-	entry	= ring_buffer_event_data(event);
-	entry->arg1			= arg1;
-	entry->arg2			= arg2;
-	entry->arg3			= arg3;
-
-	if (!filter_check_discard(call, entry, buffer, event))
-		trace_buffer_unlock_commit(buffer, event, 0, pc);
-}
-
-void
-__trace_special(void *__tr, void *__data,
-		unsigned long arg1, unsigned long arg2, unsigned long arg3)
-{
-	ftrace_trace_special(__tr, arg1, arg2, arg3, preempt_count());
-}
-
-void
-ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3)
-{
-	struct trace_array *tr = &global_trace;
-	struct trace_array_cpu *data;
-	unsigned long flags;
-	int cpu;
-	int pc;
-
-	if (tracing_disabled)
-		return;
-
-	pc = preempt_count();
-	local_irq_save(flags);
-	cpu = raw_smp_processor_id();
-	data = tr->data[cpu];
-
-	if (likely(atomic_inc_return(&data->disabled) == 1))
-		ftrace_trace_special(tr, arg1, arg2, arg3, pc);
-
-	atomic_dec(&data->disabled);
-	local_irq_restore(flags);
-}
-
 /**
  * trace_vbprintk - write binary msg to tracing buffer
  *
@@ -1404,7 +1348,6 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
 	struct bprint_entry *entry;
 	unsigned long flags;
 	int disable;
-	int resched;
 	int cpu, len = 0, size, pc;
 
 	if (unlikely(tracing_selftest_running || tracing_disabled))
@@ -1414,7 +1357,7 @@ int trace_vbprintk(unsigned long ip, const char *fmt, va_list args)
 	pause_graph_tracing();
 
 	pc = preempt_count();
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 	cpu = raw_smp_processor_id();
 	data = tr->data[cpu];
 
@@ -1452,7 +1395,7 @@ out_unlock:
 
 out:
 	atomic_dec_return(&data->disabled);
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 	unpause_graph_tracing();
 
 	return len;
@@ -1539,11 +1482,6 @@ int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
 }
 EXPORT_SYMBOL_GPL(trace_vprintk);
 
-enum trace_file_type {
-	TRACE_FILE_LAT_FMT	= 1,
-	TRACE_FILE_ANNOTATE	= 2,
-};
-
 static void trace_iterator_increment(struct trace_iterator *iter)
 {
 	/* Don't allow ftrace to trace into the ring buffers */
@@ -1641,7 +1579,7 @@ struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
 }
 
 /* Find the next real entry, and increment the iterator to the next entry */
-static void *find_next_entry_inc(struct trace_iterator *iter)
+void *trace_find_next_entry_inc(struct trace_iterator *iter)
 {
 	iter->ent = __find_next_entry(iter, &iter->cpu,
 				      &iter->lost_events, &iter->ts);
@@ -1676,19 +1614,19 @@ static void *s_next(struct seq_file *m, void *v, loff_t *pos)
 		return NULL;
 
 	if (iter->idx < 0)
-		ent = find_next_entry_inc(iter);
+		ent = trace_find_next_entry_inc(iter);
 	else
 		ent = iter;
 
 	while (ent && iter->idx < i)
-		ent = find_next_entry_inc(iter);
+		ent = trace_find_next_entry_inc(iter);
 
 	iter->pos = *pos;
 
 	return ent;
 }
 
-static void tracing_iter_reset(struct trace_iterator *iter, int cpu)
+void tracing_iter_reset(struct trace_iterator *iter, int cpu)
 {
 	struct trace_array *tr = iter->tr;
 	struct ring_buffer_event *event;
@@ -2049,7 +1987,7 @@ int trace_empty(struct trace_iterator *iter)
 }
 
 /*  Called with trace_event_read_lock() held. */
-static enum print_line_t print_trace_line(struct trace_iterator *iter)
+enum print_line_t print_trace_line(struct trace_iterator *iter)
 {
 	enum print_line_t ret;
 
@@ -2394,6 +2332,7 @@ static const struct file_operations show_traces_fops = {
 	.open		= show_traces_open,
 	.read		= seq_read,
 	.release	= seq_release,
+	.llseek		= seq_lseek,
 };
 
 /*
@@ -2487,6 +2426,7 @@ static const struct file_operations tracing_cpumask_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_cpumask_read,
 	.write		= tracing_cpumask_write,
+	.llseek		= generic_file_llseek,
 };
 
 static int tracing_trace_options_show(struct seq_file *m, void *v)
@@ -2562,6 +2502,9 @@ static void set_tracer_flags(unsigned int mask, int enabled)
 		trace_flags |= mask;
 	else
 		trace_flags &= ~mask;
+
+	if (mask == TRACE_ITER_RECORD_CMD)
+		trace_event_enable_cmd_record(enabled);
 }
 
 static ssize_t
@@ -2653,6 +2596,7 @@ tracing_readme_read(struct file *filp, char __user *ubuf,
 static const struct file_operations tracing_readme_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_readme_read,
+	.llseek		= generic_file_llseek,
 };
 
 static ssize_t
@@ -2703,6 +2647,7 @@ tracing_saved_cmdlines_read(struct file *file, char __user *ubuf,
 static const struct file_operations tracing_saved_cmdlines_fops = {
     .open       = tracing_open_generic,
     .read       = tracing_saved_cmdlines_read,
+    .llseek	= generic_file_llseek,
 };
 
 static ssize_t
@@ -2798,6 +2743,9 @@ static int tracing_resize_ring_buffer(unsigned long size)
 	if (ret < 0)
 		return ret;
 
+	if (!current_trace->use_max_tr)
+		goto out;
+
 	ret = ring_buffer_resize(max_tr.buffer, size);
 	if (ret < 0) {
 		int r;
@@ -2825,11 +2773,14 @@ static int tracing_resize_ring_buffer(unsigned long size)
 		return ret;
 	}
 
+	max_tr.entries = size;
+ out:
 	global_trace.entries = size;
 
 	return ret;
 }
 
+
 /**
  * tracing_update_buffers - used by tracing facility to expand ring buffers
  *
@@ -2890,12 +2841,26 @@ static int tracing_set_tracer(const char *buf)
 	trace_branch_disable();
 	if (current_trace && current_trace->reset)
 		current_trace->reset(tr);
-
+	if (current_trace && current_trace->use_max_tr) {
+		/*
+		 * We don't free the ring buffer. instead, resize it because
+		 * The max_tr ring buffer has some state (e.g. ring->clock) and
+		 * we want preserve it.
+		 */
+		ring_buffer_resize(max_tr.buffer, 1);
+		max_tr.entries = 1;
+	}
 	destroy_trace_option_files(topts);
 
 	current_trace = t;
 
 	topts = create_trace_option_files(current_trace);
+	if (current_trace->use_max_tr) {
+		ret = ring_buffer_resize(max_tr.buffer, global_trace.entries);
+		if (ret < 0)
+			goto out;
+		max_tr.entries = global_trace.entries;
+	}
 
 	if (t->init) {
 		ret = tracer_init(t, tr);
@@ -3032,6 +2997,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp)
 	if (iter->trace->pipe_open)
 		iter->trace->pipe_open(iter);
 
+	nonseekable_open(inode, filp);
 out:
 	mutex_unlock(&trace_types_lock);
 	return ret;
@@ -3211,7 +3177,7 @@ waitagain:
 
 	trace_event_read_lock();
 	trace_access_lock(iter->cpu_file);
-	while (find_next_entry_inc(iter) != NULL) {
+	while (trace_find_next_entry_inc(iter) != NULL) {
 		enum print_line_t ret;
 		int len = iter->seq.len;
 
@@ -3294,7 +3260,7 @@ tracing_fill_pipe_page(size_t rem, struct trace_iterator *iter)
 		if (ret != TRACE_TYPE_NO_CONSUME)
 			trace_consume(iter);
 		rem -= count;
-		if (!find_next_entry_inc(iter))	{
+		if (!trace_find_next_entry_inc(iter))	{
 			rem = 0;
 			iter->ent = NULL;
 			break;
@@ -3350,7 +3316,7 @@ static ssize_t tracing_splice_read_pipe(struct file *filp,
 	if (ret <= 0)
 		goto out_err;
 
-	if (!iter->ent && !find_next_entry_inc(iter)) {
+	if (!iter->ent && !trace_find_next_entry_inc(iter)) {
 		ret = -EFAULT;
 		goto out_err;
 	}
@@ -3477,7 +3443,6 @@ tracing_entries_write(struct file *filp, const char __user *ubuf,
 	}
 
 	tracing_start();
-	max_tr.entries = global_trace.entries;
 	mutex_unlock(&trace_types_lock);
 
 	return cnt;
@@ -3590,18 +3555,21 @@ static const struct file_operations tracing_max_lat_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_max_lat_read,
 	.write		= tracing_max_lat_write,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations tracing_ctrl_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_ctrl_read,
 	.write		= tracing_ctrl_write,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations set_tracer_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_set_trace_read,
 	.write		= tracing_set_trace_write,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations tracing_pipe_fops = {
@@ -3610,17 +3578,20 @@ static const struct file_operations tracing_pipe_fops = {
 	.read		= tracing_read_pipe,
 	.splice_read	= tracing_splice_read_pipe,
 	.release	= tracing_release_pipe,
+	.llseek		= no_llseek,
 };
 
 static const struct file_operations tracing_entries_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_entries_read,
 	.write		= tracing_entries_write,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations tracing_mark_fops = {
 	.open		= tracing_open_generic,
 	.write		= tracing_mark_write,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct file_operations trace_clock_fops = {
@@ -3926,6 +3897,7 @@ tracing_stats_read(struct file *filp, char __user *ubuf,
 static const struct file_operations tracing_stats_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_stats_read,
+	.llseek		= generic_file_llseek,
 };
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -3962,6 +3934,7 @@ tracing_read_dyn_info(struct file *filp, char __user *ubuf,
 static const struct file_operations tracing_dyn_info_fops = {
 	.open		= tracing_open_generic,
 	.read		= tracing_read_dyn_info,
+	.llseek		= generic_file_llseek,
 };
 #endif
 
@@ -4115,6 +4088,7 @@ static const struct file_operations trace_options_fops = {
 	.open = tracing_open_generic,
 	.read = trace_options_read,
 	.write = trace_options_write,
+	.llseek	= generic_file_llseek,
 };
 
 static ssize_t
@@ -4166,6 +4140,7 @@ static const struct file_operations trace_options_core_fops = {
 	.open = tracing_open_generic,
 	.read = trace_options_core_read,
 	.write = trace_options_core_write,
+	.llseek = generic_file_llseek,
 };
 
 struct dentry *trace_create_file(const char *name,
@@ -4355,9 +4330,6 @@ static __init int tracer_init_debugfs(void)
 	trace_create_file("dyn_ftrace_total_info", 0444, d_tracer,
 			&ftrace_update_tot_cnt, &tracing_dyn_info_fops);
 #endif
-#ifdef CONFIG_SYSPROF_TRACER
-	init_tracer_sysprof_debugfs(d_tracer);
-#endif
 
 	create_trace_options_dir();
 
@@ -4414,7 +4386,7 @@ static struct notifier_block trace_die_notifier = {
  */
 #define KERN_TRACE		KERN_EMERG
 
-static void
+void
 trace_printk_seq(struct trace_seq *s)
 {
 	/* Probably should print a warning here. */
@@ -4429,6 +4401,13 @@ trace_printk_seq(struct trace_seq *s)
 	trace_seq_init(s);
 }
 
+void trace_init_global_iter(struct trace_iterator *iter)
+{
+	iter->tr = &global_trace;
+	iter->trace = current_trace;
+	iter->cpu_file = TRACE_PIPE_ALL_CPU;
+}
+
 static void
 __ftrace_dump(bool disable_tracing, enum ftrace_dump_mode oops_dump_mode)
 {
@@ -4454,8 +4433,10 @@ __ftrace_dump(bool disable_tracing, enum ftrace_dump_mode oops_dump_mode)
 	if (disable_tracing)
 		ftrace_kill();
 
+	trace_init_global_iter(&iter);
+
 	for_each_tracing_cpu(cpu) {
-		atomic_inc(&global_trace.data[cpu]->disabled);
+		atomic_inc(&iter.tr->data[cpu]->disabled);
 	}
 
 	old_userobj = trace_flags & TRACE_ITER_SYM_USEROBJ;
@@ -4504,7 +4485,7 @@ __ftrace_dump(bool disable_tracing, enum ftrace_dump_mode oops_dump_mode)
 		iter.iter_flags |= TRACE_FILE_LAT_FMT;
 		iter.pos = -1;
 
-		if (find_next_entry_inc(&iter) != NULL) {
+		if (trace_find_next_entry_inc(&iter) != NULL) {
 			int ret;
 
 			ret = print_trace_line(&iter);
@@ -4526,7 +4507,7 @@ __ftrace_dump(bool disable_tracing, enum ftrace_dump_mode oops_dump_mode)
 		trace_flags |= old_userobj;
 
 		for_each_tracing_cpu(cpu) {
-			atomic_dec(&global_trace.data[cpu]->disabled);
+			atomic_dec(&iter.tr->data[cpu]->disabled);
 		}
 		tracing_on();
 	}
@@ -4575,16 +4556,14 @@ __init static int tracer_alloc_buffers(void)
 
 
 #ifdef CONFIG_TRACER_MAX_TRACE
-	max_tr.buffer = ring_buffer_alloc(ring_buf_size,
-					     TRACE_BUFFER_FLAGS);
+	max_tr.buffer = ring_buffer_alloc(1, TRACE_BUFFER_FLAGS);
 	if (!max_tr.buffer) {
 		printk(KERN_ERR "tracer: failed to allocate max ring buffer!\n");
 		WARN_ON(1);
 		ring_buffer_free(global_trace.buffer);
 		goto out_free_cpumask;
 	}
-	max_tr.entries = ring_buffer_size(max_tr.buffer);
-	WARN_ON(max_tr.entries != global_trace.entries);
+	max_tr.entries = 1;
 #endif
 
 	/* Allocate the first page for all buffers */
@@ -4597,9 +4576,6 @@ __init static int tracer_alloc_buffers(void)
 
 	register_tracer(&nop_trace);
 	current_trace = &nop_trace;
-#ifdef CONFIG_BOOT_TRACER
-	register_tracer(&boot_tracer);
-#endif
 	/* All seems OK, enable tracing */
 	tracing_disabled = 0;
 
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 2cd96399463..d39b3c5454a 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -9,10 +9,7 @@
 #include <linux/mmiotrace.h>
 #include <linux/tracepoint.h>
 #include <linux/ftrace.h>
-#include <trace/boot.h>
-#include <linux/kmemtrace.h>
 #include <linux/hw_breakpoint.h>
-
 #include <linux/trace_seq.h>
 #include <linux/ftrace_event.h>
 
@@ -25,30 +22,17 @@ enum trace_type {
 	TRACE_STACK,
 	TRACE_PRINT,
 	TRACE_BPRINT,
-	TRACE_SPECIAL,
 	TRACE_MMIO_RW,
 	TRACE_MMIO_MAP,
 	TRACE_BRANCH,
-	TRACE_BOOT_CALL,
-	TRACE_BOOT_RET,
 	TRACE_GRAPH_RET,
 	TRACE_GRAPH_ENT,
 	TRACE_USER_STACK,
-	TRACE_KMEM_ALLOC,
-	TRACE_KMEM_FREE,
 	TRACE_BLK,
-	TRACE_KSYM,
 
 	__TRACE_LAST_TYPE,
 };
 
-enum kmemtrace_type_id {
-	KMEMTRACE_TYPE_KMALLOC = 0,	/* kmalloc() or kfree(). */
-	KMEMTRACE_TYPE_CACHE,		/* kmem_cache_*(). */
-	KMEMTRACE_TYPE_PAGES,		/* __get_free_pages() and friends. */
-};
-
-extern struct tracer boot_tracer;
 
 #undef __field
 #define __field(type, item)		type	item;
@@ -204,23 +188,15 @@ extern void __ftrace_bad_type(void);
 		IF_ASSIGN(var, ent, struct userstack_entry, TRACE_USER_STACK);\
 		IF_ASSIGN(var, ent, struct print_entry, TRACE_PRINT);	\
 		IF_ASSIGN(var, ent, struct bprint_entry, TRACE_BPRINT);	\
-		IF_ASSIGN(var, ent, struct special_entry, 0);		\
 		IF_ASSIGN(var, ent, struct trace_mmiotrace_rw,		\
 			  TRACE_MMIO_RW);				\
 		IF_ASSIGN(var, ent, struct trace_mmiotrace_map,		\
 			  TRACE_MMIO_MAP);				\
-		IF_ASSIGN(var, ent, struct trace_boot_call, TRACE_BOOT_CALL);\
-		IF_ASSIGN(var, ent, struct trace_boot_ret, TRACE_BOOT_RET);\
 		IF_ASSIGN(var, ent, struct trace_branch, TRACE_BRANCH); \
 		IF_ASSIGN(var, ent, struct ftrace_graph_ent_entry,	\
 			  TRACE_GRAPH_ENT);		\
 		IF_ASSIGN(var, ent, struct ftrace_graph_ret_entry,	\
 			  TRACE_GRAPH_RET);		\
-		IF_ASSIGN(var, ent, struct kmemtrace_alloc_entry,	\
-			  TRACE_KMEM_ALLOC);	\
-		IF_ASSIGN(var, ent, struct kmemtrace_free_entry,	\
-			  TRACE_KMEM_FREE);	\
-		IF_ASSIGN(var, ent, struct ksym_trace_entry, TRACE_KSYM);\
 		__ftrace_bad_type();					\
 	} while (0)
 
@@ -298,6 +274,7 @@ struct tracer {
 	struct tracer		*next;
 	int			print_max;
 	struct tracer_flags	*flags;
+	int			use_max_tr;
 };
 
 
@@ -318,7 +295,6 @@ struct dentry *trace_create_file(const char *name,
 				 const struct file_operations *fops);
 
 struct dentry *tracing_init_dentry(void);
-void init_tracer_sysprof_debugfs(struct dentry *d_tracer);
 
 struct ring_buffer_event;
 
@@ -338,6 +314,14 @@ struct trace_entry *tracing_get_trace_entry(struct trace_array *tr,
 struct trace_entry *trace_find_next_entry(struct trace_iterator *iter,
 					  int *ent_cpu, u64 *ent_ts);
 
+int trace_empty(struct trace_iterator *iter);
+
+void *trace_find_next_entry_inc(struct trace_iterator *iter);
+
+void trace_init_global_iter(struct trace_iterator *iter);
+
+void tracing_iter_reset(struct trace_iterator *iter, int cpu);
+
 void default_wait_pipe(struct trace_iterator *iter);
 void poll_wait_pipe(struct trace_iterator *iter);
 
@@ -355,11 +339,6 @@ void tracing_sched_wakeup_trace(struct trace_array *tr,
 				struct task_struct *wakee,
 				struct task_struct *cur,
 				unsigned long flags, int pc);
-void trace_special(struct trace_array *tr,
-		   struct trace_array_cpu *data,
-		   unsigned long arg1,
-		   unsigned long arg2,
-		   unsigned long arg3, int pc);
 void trace_function(struct trace_array *tr,
 		    unsigned long ip,
 		    unsigned long parent_ip,
@@ -380,8 +359,15 @@ void tracing_start_sched_switch_record(void);
 int register_tracer(struct tracer *type);
 void unregister_tracer(struct tracer *type);
 int is_tracing_stopped(void);
+enum trace_file_type {
+	TRACE_FILE_LAT_FMT	= 1,
+	TRACE_FILE_ANNOTATE	= 2,
+};
+
+extern cpumask_var_t __read_mostly tracing_buffer_mask;
 
-extern int process_new_ksym_entry(char *ksymname, int op, unsigned long addr);
+#define for_each_tracing_cpu(cpu)	\
+	for_each_cpu(cpu, tracing_buffer_mask)
 
 extern unsigned long nsecs_to_usecs(unsigned long nsecs);
 
@@ -452,12 +438,8 @@ extern int trace_selftest_startup_nop(struct tracer *trace,
 					 struct trace_array *tr);
 extern int trace_selftest_startup_sched_switch(struct tracer *trace,
 					       struct trace_array *tr);
-extern int trace_selftest_startup_sysprof(struct tracer *trace,
-					       struct trace_array *tr);
 extern int trace_selftest_startup_branch(struct tracer *trace,
 					 struct trace_array *tr);
-extern int trace_selftest_startup_ksym(struct tracer *trace,
-					 struct trace_array *tr);
 #endif /* CONFIG_FTRACE_STARTUP_TEST */
 
 extern void *head_page(struct trace_array_cpu *data);
@@ -471,6 +453,8 @@ trace_array_vprintk(struct trace_array *tr,
 		    unsigned long ip, const char *fmt, va_list args);
 int trace_array_printk(struct trace_array *tr,
 		       unsigned long ip, const char *fmt, ...);
+void trace_printk_seq(struct trace_seq *s);
+enum print_line_t print_trace_line(struct trace_iterator *iter);
 
 extern unsigned long trace_flags;
 
@@ -617,6 +601,7 @@ enum trace_iterator_flags {
 	TRACE_ITER_LATENCY_FMT		= 0x20000,
 	TRACE_ITER_SLEEP_TIME		= 0x40000,
 	TRACE_ITER_GRAPH_TIME		= 0x80000,
+	TRACE_ITER_RECORD_CMD		= 0x100000,
 };
 
 /*
@@ -628,54 +613,6 @@ enum trace_iterator_flags {
 
 extern struct tracer nop_trace;
 
-/**
- * ftrace_preempt_disable - disable preemption scheduler safe
- *
- * When tracing can happen inside the scheduler, there exists
- * cases that the tracing might happen before the need_resched
- * flag is checked. If this happens and the tracer calls
- * preempt_enable (after a disable), a schedule might take place
- * causing an infinite recursion.
- *
- * To prevent this, we read the need_resched flag before
- * disabling preemption. When we want to enable preemption we
- * check the flag, if it is set, then we call preempt_enable_no_resched.
- * Otherwise, we call preempt_enable.
- *
- * The rational for doing the above is that if need_resched is set
- * and we have yet to reschedule, we are either in an atomic location
- * (where we do not need to check for scheduling) or we are inside
- * the scheduler and do not want to resched.
- */
-static inline int ftrace_preempt_disable(void)
-{
-	int resched;
-
-	resched = need_resched();
-	preempt_disable_notrace();
-
-	return resched;
-}
-
-/**
- * ftrace_preempt_enable - enable preemption scheduler safe
- * @resched: the return value from ftrace_preempt_disable
- *
- * This is a scheduler safe way to enable preemption and not miss
- * any preemption checks. The disabled saved the state of preemption.
- * If resched is set, then we are either inside an atomic or
- * are inside the scheduler (we would have already scheduled
- * otherwise). In this case, we do not want to call normal
- * preempt_enable, but preempt_enable_no_resched instead.
- */
-static inline void ftrace_preempt_enable(int resched)
-{
-	if (resched)
-		preempt_enable_no_resched_notrace();
-	else
-		preempt_enable_notrace();
-}
-
 #ifdef CONFIG_BRANCH_TRACER
 extern int enable_branch_tracing(struct trace_array *tr);
 extern void disable_branch_tracing(void);
@@ -766,6 +703,8 @@ struct filter_pred {
 	int 			pop_n;
 };
 
+extern struct list_head ftrace_common_fields;
+
 extern enum regex_type
 filter_parse_regex(char *buff, int len, char **search, int *not);
 extern void print_event_filter(struct ftrace_event_call *call,
@@ -795,6 +734,8 @@ filter_check_discard(struct ftrace_event_call *call, void *rec,
 	return 0;
 }
 
+extern void trace_event_enable_cmd_record(bool enable);
+
 extern struct mutex event_mutex;
 extern struct list_head ftrace_events;
 
diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c
deleted file mode 100644
index c21d5f3956a..00000000000
--- a/kernel/trace/trace_boot.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * ring buffer based initcalls tracer
- *
- * Copyright (C) 2008 Frederic Weisbecker <fweisbec@gmail.com>
- *
- */
-
-#include <linux/init.h>
-#include <linux/debugfs.h>
-#include <linux/ftrace.h>
-#include <linux/kallsyms.h>
-#include <linux/time.h>
-
-#include "trace.h"
-#include "trace_output.h"
-
-static struct trace_array *boot_trace;
-static bool pre_initcalls_finished;
-
-/* Tells the boot tracer that the pre_smp_initcalls are finished.
- * So we are ready .
- * It doesn't enable sched events tracing however.
- * You have to call enable_boot_trace to do so.
- */
-void start_boot_trace(void)
-{
-	pre_initcalls_finished = true;
-}
-
-void enable_boot_trace(void)
-{
-	if (boot_trace && pre_initcalls_finished)
-		tracing_start_sched_switch_record();
-}
-
-void disable_boot_trace(void)
-{
-	if (boot_trace && pre_initcalls_finished)
-		tracing_stop_sched_switch_record();
-}
-
-static int boot_trace_init(struct trace_array *tr)
-{
-	boot_trace = tr;
-
-	if (!tr)
-		return 0;
-
-	tracing_reset_online_cpus(tr);
-
-	tracing_sched_switch_assign_trace(tr);
-	return 0;
-}
-
-static enum print_line_t
-initcall_call_print_line(struct trace_iterator *iter)
-{
-	struct trace_entry *entry = iter->ent;
-	struct trace_seq *s = &iter->seq;
-	struct trace_boot_call *field;
-	struct boot_trace_call *call;
-	u64 ts;
-	unsigned long nsec_rem;
-	int ret;
-
-	trace_assign_type(field, entry);
-	call = &field->boot_call;
-	ts = iter->ts;
-	nsec_rem = do_div(ts, NSEC_PER_SEC);
-
-	ret = trace_seq_printf(s, "[%5ld.%09ld] calling  %s @ %i\n",
-			(unsigned long)ts, nsec_rem, call->func, call->caller);
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-	else
-		return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t
-initcall_ret_print_line(struct trace_iterator *iter)
-{
-	struct trace_entry *entry = iter->ent;
-	struct trace_seq *s = &iter->seq;
-	struct trace_boot_ret *field;
-	struct boot_trace_ret *init_ret;
-	u64 ts;
-	unsigned long nsec_rem;
-	int ret;
-
-	trace_assign_type(field, entry);
-	init_ret = &field->boot_ret;
-	ts = iter->ts;
-	nsec_rem = do_div(ts, NSEC_PER_SEC);
-
-	ret = trace_seq_printf(s, "[%5ld.%09ld] initcall %s "
-			"returned %d after %llu msecs\n",
-			(unsigned long) ts,
-			nsec_rem,
-			init_ret->func, init_ret->result, init_ret->duration);
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-	else
-		return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t initcall_print_line(struct trace_iterator *iter)
-{
-	struct trace_entry *entry = iter->ent;
-
-	switch (entry->type) {
-	case TRACE_BOOT_CALL:
-		return initcall_call_print_line(iter);
-	case TRACE_BOOT_RET:
-		return initcall_ret_print_line(iter);
-	default:
-		return TRACE_TYPE_UNHANDLED;
-	}
-}
-
-struct tracer boot_tracer __read_mostly =
-{
-	.name		= "initcall",
-	.init		= boot_trace_init,
-	.reset		= tracing_reset_online_cpus,
-	.print_line	= initcall_print_line,
-};
-
-void trace_boot_call(struct boot_trace_call *bt, initcall_t fn)
-{
-	struct ftrace_event_call *call = &event_boot_call;
-	struct ring_buffer_event *event;
-	struct ring_buffer *buffer;
-	struct trace_boot_call *entry;
-	struct trace_array *tr = boot_trace;
-
-	if (!tr || !pre_initcalls_finished)
-		return;
-
-	/* Get its name now since this function could
-	 * disappear because it is in the .init section.
-	 */
-	sprint_symbol(bt->func, (unsigned long)fn);
-	preempt_disable();
-
-	buffer = tr->buffer;
-	event = trace_buffer_lock_reserve(buffer, TRACE_BOOT_CALL,
-					  sizeof(*entry), 0, 0);
-	if (!event)
-		goto out;
-	entry	= ring_buffer_event_data(event);
-	entry->boot_call = *bt;
-	if (!filter_check_discard(call, entry, buffer, event))
-		trace_buffer_unlock_commit(buffer, event, 0, 0);
- out:
-	preempt_enable();
-}
-
-void trace_boot_ret(struct boot_trace_ret *bt, initcall_t fn)
-{
-	struct ftrace_event_call *call = &event_boot_ret;
-	struct ring_buffer_event *event;
-	struct ring_buffer *buffer;
-	struct trace_boot_ret *entry;
-	struct trace_array *tr = boot_trace;
-
-	if (!tr || !pre_initcalls_finished)
-		return;
-
-	sprint_symbol(bt->func, (unsigned long)fn);
-	preempt_disable();
-
-	buffer = tr->buffer;
-	event = trace_buffer_lock_reserve(buffer, TRACE_BOOT_RET,
-					  sizeof(*entry), 0, 0);
-	if (!event)
-		goto out;
-	entry	= ring_buffer_event_data(event);
-	entry->boot_ret = *bt;
-	if (!filter_check_discard(call, entry, buffer, event))
-		trace_buffer_unlock_commit(buffer, event, 0, 0);
- out:
-	preempt_enable();
-}
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 9d589d8dcd1..685a67d55db 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -32,16 +32,15 @@
 u64 notrace trace_clock_local(void)
 {
 	u64 clock;
-	int resched;
 
 	/*
 	 * sched_clock() is an architecture implemented, fast, scalable,
 	 * lockless clock. It is not guaranteed to be coherent across
 	 * CPUs, nor across CPU idle events.
 	 */
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 	clock = sched_clock();
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 
 	return clock;
 }
@@ -56,7 +55,7 @@ u64 notrace trace_clock_local(void)
  */
 u64 notrace trace_clock(void)
 {
-	return cpu_clock(raw_smp_processor_id());
+	return local_clock();
 }
 
 
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index dc008c1240d..e3dfecaf13e 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -151,23 +151,6 @@ FTRACE_ENTRY_DUP(wakeup, ctx_switch_entry,
 );
 
 /*
- * Special (free-form) trace entry:
- */
-FTRACE_ENTRY(special, special_entry,
-
-	TRACE_SPECIAL,
-
-	F_STRUCT(
-		__field(	unsigned long,	arg1	)
-		__field(	unsigned long,	arg2	)
-		__field(	unsigned long,	arg3	)
-	),
-
-	F_printk("(%08lx) (%08lx) (%08lx)",
-		 __entry->arg1, __entry->arg2, __entry->arg3)
-);
-
-/*
  * Stack-trace entry:
  */
 
@@ -271,33 +254,6 @@ FTRACE_ENTRY(mmiotrace_map, trace_mmiotrace_map,
 		 __entry->map_id, __entry->opcode)
 );
 
-FTRACE_ENTRY(boot_call, trace_boot_call,
-
-	TRACE_BOOT_CALL,
-
-	F_STRUCT(
-		__field_struct(	struct boot_trace_call,	boot_call	)
-		__field_desc(	pid_t,	boot_call,	caller		)
-		__array_desc(	char,	boot_call,	func,	KSYM_SYMBOL_LEN)
-	),
-
-	F_printk("%d  %s", __entry->caller, __entry->func)
-);
-
-FTRACE_ENTRY(boot_ret, trace_boot_ret,
-
-	TRACE_BOOT_RET,
-
-	F_STRUCT(
-		__field_struct(	struct boot_trace_ret,	boot_ret	)
-		__array_desc(	char,	boot_ret,	func,	KSYM_SYMBOL_LEN)
-		__field_desc(	int,	boot_ret,	result		)
-		__field_desc(	unsigned long, boot_ret, duration	)
-	),
-
-	F_printk("%s %d %lx",
-		 __entry->func, __entry->result, __entry->duration)
-);
 
 #define TRACE_FUNC_SIZE 30
 #define TRACE_FILE_SIZE 20
@@ -318,53 +274,3 @@ FTRACE_ENTRY(branch, trace_branch,
 		 __entry->func, __entry->file, __entry->correct)
 );
 
-FTRACE_ENTRY(kmem_alloc, kmemtrace_alloc_entry,
-
-	TRACE_KMEM_ALLOC,
-
-	F_STRUCT(
-		__field(	enum kmemtrace_type_id,	type_id		)
-		__field(	unsigned long,		call_site	)
-		__field(	const void *,		ptr		)
-		__field(	size_t,			bytes_req	)
-		__field(	size_t,			bytes_alloc	)
-		__field(	gfp_t,			gfp_flags	)
-		__field(	int,			node		)
-	),
-
-	F_printk("type:%u call_site:%lx ptr:%p req:%zi alloc:%zi"
-		 " flags:%x node:%d",
-		 __entry->type_id, __entry->call_site, __entry->ptr,
-		 __entry->bytes_req, __entry->bytes_alloc,
-		 __entry->gfp_flags, __entry->node)
-);
-
-FTRACE_ENTRY(kmem_free, kmemtrace_free_entry,
-
-	TRACE_KMEM_FREE,
-
-	F_STRUCT(
-		__field(	enum kmemtrace_type_id,	type_id		)
-		__field(	unsigned long,		call_site	)
-		__field(	const void *,		ptr		)
-	),
-
-	F_printk("type:%u call_site:%lx ptr:%p",
-		 __entry->type_id, __entry->call_site, __entry->ptr)
-);
-
-FTRACE_ENTRY(ksym_trace, ksym_trace_entry,
-
-	TRACE_KSYM,
-
-	F_STRUCT(
-		__field(	unsigned long,	ip			  )
-		__field(	unsigned char,	type			  )
-		__array(	char	     ,	cmd,	   TASK_COMM_LEN  )
-		__field(	unsigned long,  addr			  )
-	),
-
-	F_printk("ip: %pF type: %d ksym_name: %pS cmd: %s",
-		(void *)__entry->ip, (unsigned int)__entry->type,
-		(void *)__entry->addr,  __entry->cmd)
-);
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 8a2b73f7c06..000e6e85b44 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -9,8 +9,6 @@
 #include <linux/kprobes.h>
 #include "trace.h"
 
-EXPORT_SYMBOL_GPL(perf_arch_fetch_caller_regs);
-
 static char *perf_trace_buf[4];
 
 /*
@@ -56,13 +54,7 @@ static int perf_trace_event_init(struct ftrace_event_call *tp_event,
 		}
 	}
 
-	if (tp_event->class->reg)
-		ret = tp_event->class->reg(tp_event, TRACE_REG_PERF_REGISTER);
-	else
-		ret = tracepoint_probe_register(tp_event->name,
-						tp_event->class->perf_probe,
-						tp_event);
-
+	ret = tp_event->class->reg(tp_event, TRACE_REG_PERF_REGISTER);
 	if (ret)
 		goto fail;
 
@@ -96,9 +88,7 @@ int perf_trace_init(struct perf_event *p_event)
 	mutex_lock(&event_mutex);
 	list_for_each_entry(tp_event, &ftrace_events, list) {
 		if (tp_event->event.type == event_id &&
-		    tp_event->class &&
-		    (tp_event->class->perf_probe ||
-		     tp_event->class->reg) &&
+		    tp_event->class && tp_event->class->reg &&
 		    try_module_get(tp_event->mod)) {
 			ret = perf_trace_event_init(tp_event, p_event);
 			break;
@@ -138,18 +128,13 @@ void perf_trace_destroy(struct perf_event *p_event)
 	if (--tp_event->perf_refcount > 0)
 		goto out;
 
-	if (tp_event->class->reg)
-		tp_event->class->reg(tp_event, TRACE_REG_PERF_UNREGISTER);
-	else
-		tracepoint_probe_unregister(tp_event->name,
-					    tp_event->class->perf_probe,
-					    tp_event);
+	tp_event->class->reg(tp_event, TRACE_REG_PERF_UNREGISTER);
 
 	/*
-	 * Ensure our callback won't be called anymore. See
-	 * tracepoint_probe_unregister() and __DO_TRACE().
+	 * Ensure our callback won't be called anymore. The buffers
+	 * will be freed after that.
 	 */
-	synchronize_sched();
+	tracepoint_synchronize_unregister();
 
 	free_percpu(tp_event->perf_events);
 	tp_event->perf_events = NULL;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 53cffc0b080..09b4fa6e4d3 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -28,6 +28,7 @@
 DEFINE_MUTEX(event_mutex);
 
 LIST_HEAD(ftrace_events);
+LIST_HEAD(ftrace_common_fields);
 
 struct list_head *
 trace_get_fields(struct ftrace_event_call *event_call)
@@ -37,15 +38,11 @@ trace_get_fields(struct ftrace_event_call *event_call)
 	return event_call->class->get_fields(event_call);
 }
 
-int trace_define_field(struct ftrace_event_call *call, const char *type,
-		       const char *name, int offset, int size, int is_signed,
-		       int filter_type)
+static int __trace_define_field(struct list_head *head, const char *type,
+				const char *name, int offset, int size,
+				int is_signed, int filter_type)
 {
 	struct ftrace_event_field *field;
-	struct list_head *head;
-
-	if (WARN_ON(!call->class))
-		return 0;
 
 	field = kzalloc(sizeof(*field), GFP_KERNEL);
 	if (!field)
@@ -68,7 +65,6 @@ int trace_define_field(struct ftrace_event_call *call, const char *type,
 	field->size = size;
 	field->is_signed = is_signed;
 
-	head = trace_get_fields(call);
 	list_add(&field->link, head);
 
 	return 0;
@@ -80,17 +76,32 @@ err:
 
 	return -ENOMEM;
 }
+
+int trace_define_field(struct ftrace_event_call *call, const char *type,
+		       const char *name, int offset, int size, int is_signed,
+		       int filter_type)
+{
+	struct list_head *head;
+
+	if (WARN_ON(!call->class))
+		return 0;
+
+	head = trace_get_fields(call);
+	return __trace_define_field(head, type, name, offset, size,
+				    is_signed, filter_type);
+}
 EXPORT_SYMBOL_GPL(trace_define_field);
 
 #define __common_field(type, item)					\
-	ret = trace_define_field(call, #type, "common_" #item,		\
-				 offsetof(typeof(ent), item),		\
-				 sizeof(ent.item),			\
-				 is_signed_type(type), FILTER_OTHER);	\
+	ret = __trace_define_field(&ftrace_common_fields, #type,	\
+				   "common_" #item,			\
+				   offsetof(typeof(ent), item),		\
+				   sizeof(ent.item),			\
+				   is_signed_type(type), FILTER_OTHER);	\
 	if (ret)							\
 		return ret;
 
-static int trace_define_common_fields(struct ftrace_event_call *call)
+static int trace_define_common_fields(void)
 {
 	int ret;
 	struct trace_entry ent;
@@ -130,6 +141,55 @@ int trace_event_raw_init(struct ftrace_event_call *call)
 }
 EXPORT_SYMBOL_GPL(trace_event_raw_init);
 
+int ftrace_event_reg(struct ftrace_event_call *call, enum trace_reg type)
+{
+	switch (type) {
+	case TRACE_REG_REGISTER:
+		return tracepoint_probe_register(call->name,
+						 call->class->probe,
+						 call);
+	case TRACE_REG_UNREGISTER:
+		tracepoint_probe_unregister(call->name,
+					    call->class->probe,
+					    call);
+		return 0;
+
+#ifdef CONFIG_PERF_EVENTS
+	case TRACE_REG_PERF_REGISTER:
+		return tracepoint_probe_register(call->name,
+						 call->class->perf_probe,
+						 call);
+	case TRACE_REG_PERF_UNREGISTER:
+		tracepoint_probe_unregister(call->name,
+					    call->class->perf_probe,
+					    call);
+		return 0;
+#endif
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ftrace_event_reg);
+
+void trace_event_enable_cmd_record(bool enable)
+{
+	struct ftrace_event_call *call;
+
+	mutex_lock(&event_mutex);
+	list_for_each_entry(call, &ftrace_events, list) {
+		if (!(call->flags & TRACE_EVENT_FL_ENABLED))
+			continue;
+
+		if (enable) {
+			tracing_start_cmdline_record();
+			call->flags |= TRACE_EVENT_FL_RECORDED_CMD;
+		} else {
+			tracing_stop_cmdline_record();
+			call->flags &= ~TRACE_EVENT_FL_RECORDED_CMD;
+		}
+	}
+	mutex_unlock(&event_mutex);
+}
+
 static int ftrace_event_enable_disable(struct ftrace_event_call *call,
 					int enable)
 {
@@ -139,24 +199,20 @@ static int ftrace_event_enable_disable(struct ftrace_event_call *call,
 	case 0:
 		if (call->flags & TRACE_EVENT_FL_ENABLED) {
 			call->flags &= ~TRACE_EVENT_FL_ENABLED;
-			tracing_stop_cmdline_record();
-			if (call->class->reg)
-				call->class->reg(call, TRACE_REG_UNREGISTER);
-			else
-				tracepoint_probe_unregister(call->name,
-							    call->class->probe,
-							    call);
+			if (call->flags & TRACE_EVENT_FL_RECORDED_CMD) {
+				tracing_stop_cmdline_record();
+				call->flags &= ~TRACE_EVENT_FL_RECORDED_CMD;
+			}
+			call->class->reg(call, TRACE_REG_UNREGISTER);
 		}
 		break;
 	case 1:
 		if (!(call->flags & TRACE_EVENT_FL_ENABLED)) {
-			tracing_start_cmdline_record();
-			if (call->class->reg)
-				ret = call->class->reg(call, TRACE_REG_REGISTER);
-			else
-				ret = tracepoint_probe_register(call->name,
-								call->class->probe,
-								call);
+			if (trace_flags & TRACE_ITER_RECORD_CMD) {
+				tracing_start_cmdline_record();
+				call->flags |= TRACE_EVENT_FL_RECORDED_CMD;
+			}
+			ret = call->class->reg(call, TRACE_REG_REGISTER);
 			if (ret) {
 				tracing_stop_cmdline_record();
 				pr_info("event trace: Could not enable event "
@@ -194,8 +250,7 @@ static int __ftrace_set_clr_event(const char *match, const char *sub,
 	mutex_lock(&event_mutex);
 	list_for_each_entry(call, &ftrace_events, list) {
 
-		if (!call->name || !call->class ||
-		    (!call->class->probe && !call->class->reg))
+		if (!call->name || !call->class || !call->class->reg)
 			continue;
 
 		if (match &&
@@ -321,7 +376,7 @@ t_next(struct seq_file *m, void *v, loff_t *pos)
 		 * The ftrace subsystem is for showing formats only.
 		 * They can not be enabled or disabled via the event files.
 		 */
-		if (call->class && (call->class->probe || call->class->reg))
+		if (call->class && call->class->reg)
 			return call;
 	}
 
@@ -474,8 +529,7 @@ system_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
 
 	mutex_lock(&event_mutex);
 	list_for_each_entry(call, &ftrace_events, list) {
-		if (!call->name || !call->class ||
-		    (!call->class->probe && !call->class->reg))
+		if (!call->name || !call->class || !call->class->reg)
 			continue;
 
 		if (system && strcmp(call->class->system, system) != 0)
@@ -544,32 +598,10 @@ out:
 	return ret;
 }
 
-static ssize_t
-event_format_read(struct file *filp, char __user *ubuf, size_t cnt,
-		  loff_t *ppos)
+static void print_event_fields(struct trace_seq *s, struct list_head *head)
 {
-	struct ftrace_event_call *call = filp->private_data;
 	struct ftrace_event_field *field;
-	struct list_head *head;
-	struct trace_seq *s;
-	int common_field_count = 5;
-	char *buf;
-	int r = 0;
-
-	if (*ppos)
-		return 0;
-
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-
-	trace_seq_init(s);
-
-	trace_seq_printf(s, "name: %s\n", call->name);
-	trace_seq_printf(s, "ID: %d\n", call->event.type);
-	trace_seq_printf(s, "format:\n");
 
-	head = trace_get_fields(call);
 	list_for_each_entry_reverse(field, head, link) {
 		/*
 		 * Smartly shows the array type(except dynamic array).
@@ -584,29 +616,54 @@ event_format_read(struct file *filp, char __user *ubuf, size_t cnt,
 			array_descriptor = NULL;
 
 		if (!array_descriptor) {
-			r = trace_seq_printf(s, "\tfield:%s %s;\toffset:%u;"
+			trace_seq_printf(s, "\tfield:%s %s;\toffset:%u;"
 					"\tsize:%u;\tsigned:%d;\n",
 					field->type, field->name, field->offset,
 					field->size, !!field->is_signed);
 		} else {
-			r = trace_seq_printf(s, "\tfield:%.*s %s%s;\toffset:%u;"
+			trace_seq_printf(s, "\tfield:%.*s %s%s;\toffset:%u;"
 					"\tsize:%u;\tsigned:%d;\n",
 					(int)(array_descriptor - field->type),
 					field->type, field->name,
 					array_descriptor, field->offset,
 					field->size, !!field->is_signed);
 		}
+	}
+}
 
-		if (--common_field_count == 0)
-			r = trace_seq_printf(s, "\n");
+static ssize_t
+event_format_read(struct file *filp, char __user *ubuf, size_t cnt,
+		  loff_t *ppos)
+{
+	struct ftrace_event_call *call = filp->private_data;
+	struct list_head *head;
+	struct trace_seq *s;
+	char *buf;
+	int r;
 
-		if (!r)
-			break;
-	}
+	if (*ppos)
+		return 0;
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+
+	trace_seq_init(s);
+
+	trace_seq_printf(s, "name: %s\n", call->name);
+	trace_seq_printf(s, "ID: %d\n", call->event.type);
+	trace_seq_printf(s, "format:\n");
+
+	/* print common fields */
+	print_event_fields(s, &ftrace_common_fields);
 
-	if (r)
-		r = trace_seq_printf(s, "\nprint fmt: %s\n",
-				call->print_fmt);
+	trace_seq_putc(s, '\n');
+
+	/* print event specific fields */
+	head = trace_get_fields(call);
+	print_event_fields(s, head);
+
+	r = trace_seq_printf(s, "\nprint fmt: %s\n", call->print_fmt);
 
 	if (!r) {
 		/*
@@ -963,35 +1020,31 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
 		return -1;
 	}
 
-	if (call->class->probe || call->class->reg)
+	if (call->class->reg)
 		trace_create_file("enable", 0644, call->dir, call,
 				  enable);
 
 #ifdef CONFIG_PERF_EVENTS
-	if (call->event.type && (call->class->perf_probe || call->class->reg))
+	if (call->event.type && call->class->reg)
 		trace_create_file("id", 0444, call->dir, call,
 		 		  id);
 #endif
 
-	if (call->class->define_fields) {
-		/*
-		 * Other events may have the same class. Only update
-		 * the fields if they are not already defined.
-		 */
-		head = trace_get_fields(call);
-		if (list_empty(head)) {
-			ret = trace_define_common_fields(call);
-			if (!ret)
-				ret = call->class->define_fields(call);
-			if (ret < 0) {
-				pr_warning("Could not initialize trace point"
-					   " events/%s\n", call->name);
-				return ret;
-			}
+	/*
+	 * Other events may have the same class. Only update
+	 * the fields if they are not already defined.
+	 */
+	head = trace_get_fields(call);
+	if (list_empty(head)) {
+		ret = call->class->define_fields(call);
+		if (ret < 0) {
+			pr_warning("Could not initialize trace point"
+				   " events/%s\n", call->name);
+			return ret;
 		}
-		trace_create_file("filter", 0644, call->dir, call,
-				  filter);
 	}
+	trace_create_file("filter", 0644, call->dir, call,
+			  filter);
 
 	trace_create_file("format", 0444, call->dir, call,
 			  format);
@@ -999,11 +1052,17 @@ event_create_dir(struct ftrace_event_call *call, struct dentry *d_events,
 	return 0;
 }
 
-static int __trace_add_event_call(struct ftrace_event_call *call)
+static int
+__trace_add_event_call(struct ftrace_event_call *call, struct module *mod,
+		       const struct file_operations *id,
+		       const struct file_operations *enable,
+		       const struct file_operations *filter,
+		       const struct file_operations *format)
 {
 	struct dentry *d_events;
 	int ret;
 
+	/* The linker may leave blanks */
 	if (!call->name)
 		return -EINVAL;
 
@@ -1011,8 +1070,8 @@ static int __trace_add_event_call(struct ftrace_event_call *call)
 		ret = call->class->raw_init(call);
 		if (ret < 0) {
 			if (ret != -ENOSYS)
-				pr_warning("Could not initialize trace "
-				"events/%s\n", call->name);
+				pr_warning("Could not initialize trace events/%s\n",
+					   call->name);
 			return ret;
 		}
 	}
@@ -1021,11 +1080,10 @@ static int __trace_add_event_call(struct ftrace_event_call *call)
 	if (!d_events)
 		return -ENOENT;
 
-	ret = event_create_dir(call, d_events, &ftrace_event_id_fops,
-				&ftrace_enable_fops, &ftrace_event_filter_fops,
-				&ftrace_event_format_fops);
+	ret = event_create_dir(call, d_events, id, enable, filter, format);
 	if (!ret)
 		list_add(&call->list, &ftrace_events);
+	call->mod = mod;
 
 	return ret;
 }
@@ -1035,7 +1093,10 @@ int trace_add_event_call(struct ftrace_event_call *call)
 {
 	int ret;
 	mutex_lock(&event_mutex);
-	ret = __trace_add_event_call(call);
+	ret = __trace_add_event_call(call, NULL, &ftrace_event_id_fops,
+				     &ftrace_enable_fops,
+				     &ftrace_event_filter_fops,
+				     &ftrace_event_format_fops);
 	mutex_unlock(&event_mutex);
 	return ret;
 }
@@ -1152,8 +1213,6 @@ static void trace_module_add_events(struct module *mod)
 {
 	struct ftrace_module_file_ops *file_ops = NULL;
 	struct ftrace_event_call *call, *start, *end;
-	struct dentry *d_events;
-	int ret;
 
 	start = mod->trace_events;
 	end = mod->trace_events + mod->num_trace_events;
@@ -1161,38 +1220,14 @@ static void trace_module_add_events(struct module *mod)
 	if (start == end)
 		return;
 
-	d_events = event_trace_events_dir();
-	if (!d_events)
+	file_ops = trace_create_file_ops(mod);
+	if (!file_ops)
 		return;
 
 	for_each_event(call, start, end) {
-		/* The linker may leave blanks */
-		if (!call->name)
-			continue;
-		if (call->class->raw_init) {
-			ret = call->class->raw_init(call);
-			if (ret < 0) {
-				if (ret != -ENOSYS)
-					pr_warning("Could not initialize trace "
-					"point events/%s\n", call->name);
-				continue;
-			}
-		}
-		/*
-		 * This module has events, create file ops for this module
-		 * if not already done.
-		 */
-		if (!file_ops) {
-			file_ops = trace_create_file_ops(mod);
-			if (!file_ops)
-				return;
-		}
-		call->mod = mod;
-		ret = event_create_dir(call, d_events,
+		__trace_add_event_call(call, mod,
 				       &file_ops->id, &file_ops->enable,
 				       &file_ops->filter, &file_ops->format);
-		if (!ret)
-			list_add(&call->list, &ftrace_events);
 	}
 }
 
@@ -1319,25 +1354,14 @@ static __init int event_trace_init(void)
 	trace_create_file("enable", 0644, d_events,
 			  NULL, &ftrace_system_enable_fops);
 
+	if (trace_define_common_fields())
+		pr_warning("tracing: Failed to allocate common fields");
+
 	for_each_event(call, __start_ftrace_events, __stop_ftrace_events) {
-		/* The linker may leave blanks */
-		if (!call->name)
-			continue;
-		if (call->class->raw_init) {
-			ret = call->class->raw_init(call);
-			if (ret < 0) {
-				if (ret != -ENOSYS)
-					pr_warning("Could not initialize trace "
-					"point events/%s\n", call->name);
-				continue;
-			}
-		}
-		ret = event_create_dir(call, d_events, &ftrace_event_id_fops,
+		__trace_add_event_call(call, NULL, &ftrace_event_id_fops,
 				       &ftrace_enable_fops,
 				       &ftrace_event_filter_fops,
 				       &ftrace_event_format_fops);
-		if (!ret)
-			list_add(&call->list, &ftrace_events);
 	}
 
 	while (true) {
@@ -1524,12 +1548,11 @@ function_test_events_call(unsigned long ip, unsigned long parent_ip)
 	struct ftrace_entry *entry;
 	unsigned long flags;
 	long disabled;
-	int resched;
 	int cpu;
 	int pc;
 
 	pc = preempt_count();
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 	cpu = raw_smp_processor_id();
 	disabled = atomic_inc_return(&per_cpu(ftrace_test_event_disable, cpu));
 
@@ -1551,7 +1574,7 @@ function_test_events_call(unsigned long ip, unsigned long parent_ip)
 
  out:
 	atomic_dec(&per_cpu(ftrace_test_event_disable, cpu));
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 }
 
 static struct ftrace_ops trace_ops __initdata  =
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 57bb1bb3299..36d40104b17 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -497,12 +497,10 @@ void print_subsystem_event_filter(struct event_subsystem *system,
 }
 
 static struct ftrace_event_field *
-find_event_field(struct ftrace_event_call *call, char *name)
+__find_event_field(struct list_head *head, char *name)
 {
 	struct ftrace_event_field *field;
-	struct list_head *head;
 
-	head = trace_get_fields(call);
 	list_for_each_entry(field, head, link) {
 		if (!strcmp(field->name, name))
 			return field;
@@ -511,6 +509,20 @@ find_event_field(struct ftrace_event_call *call, char *name)
 	return NULL;
 }
 
+static struct ftrace_event_field *
+find_event_field(struct ftrace_event_call *call, char *name)
+{
+	struct ftrace_event_field *field;
+	struct list_head *head;
+
+	field = __find_event_field(&ftrace_common_fields, name);
+	if (field)
+		return field;
+
+	head = trace_get_fields(call);
+	return __find_event_field(head, name);
+}
+
 static void filter_free_pred(struct filter_pred *pred)
 {
 	if (!pred)
@@ -627,9 +639,6 @@ static int init_subsystem_preds(struct event_subsystem *system)
 	int err;
 
 	list_for_each_entry(call, &ftrace_events, list) {
-		if (!call->class || !call->class->define_fields)
-			continue;
-
 		if (strcmp(call->class->system, system->name) != 0)
 			continue;
 
@@ -646,9 +655,6 @@ static void filter_free_subsystem_preds(struct event_subsystem *system)
 	struct ftrace_event_call *call;
 
 	list_for_each_entry(call, &ftrace_events, list) {
-		if (!call->class || !call->class->define_fields)
-			continue;
-
 		if (strcmp(call->class->system, system->name) != 0)
 			continue;
 
@@ -1251,9 +1257,6 @@ static int replace_system_preds(struct event_subsystem *system,
 	list_for_each_entry(call, &ftrace_events, list) {
 		struct event_filter *filter = call->filter;
 
-		if (!call->class || !call->class->define_fields)
-			continue;
-
 		if (strcmp(call->class->system, system->name) != 0)
 			continue;
 
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index 8536e2a6596..4ba44deaac2 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -125,12 +125,6 @@ ftrace_define_fields_##name(struct ftrace_event_call *event_call)	\
 
 #include "trace_entries.h"
 
-static int ftrace_raw_init_event(struct ftrace_event_call *call)
-{
-	INIT_LIST_HEAD(&call->class->fields);
-	return 0;
-}
-
 #undef __entry
 #define __entry REC
 
@@ -158,7 +152,7 @@ static int ftrace_raw_init_event(struct ftrace_event_call *call)
 struct ftrace_event_class event_class_ftrace_##call = {			\
 	.system			= __stringify(TRACE_SYSTEM),		\
 	.define_fields		= ftrace_define_fields_##call,		\
-	.raw_init		= ftrace_raw_init_event,		\
+	.fields			= LIST_HEAD_INIT(event_class_ftrace_##call.fields),\
 };									\
 									\
 struct ftrace_event_call __used						\
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index b3f3776b0cd..16aee4d44e8 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -54,14 +54,14 @@ function_trace_call_preempt_only(unsigned long ip, unsigned long parent_ip)
 	struct trace_array_cpu *data;
 	unsigned long flags;
 	long disabled;
-	int cpu, resched;
+	int cpu;
 	int pc;
 
 	if (unlikely(!ftrace_function_enabled))
 		return;
 
 	pc = preempt_count();
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 	local_save_flags(flags);
 	cpu = raw_smp_processor_id();
 	data = tr->data[cpu];
@@ -71,7 +71,7 @@ function_trace_call_preempt_only(unsigned long ip, unsigned long parent_ip)
 		trace_function(tr, ip, parent_ip, flags, pc);
 
 	atomic_dec(&data->disabled);
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 }
 
 static void
diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c
index 79f4bac99a9..6bff2362578 100644
--- a/kernel/trace/trace_functions_graph.c
+++ b/kernel/trace/trace_functions_graph.c
@@ -641,7 +641,8 @@ trace_print_graph_duration(unsigned long long duration, struct trace_seq *s)
 
 	/* Print nsecs (we don't want to exceed 7 numbers) */
 	if (len < 7) {
-		snprintf(nsecs_str, 8 - len, "%03lu", nsecs_rem);
+		snprintf(nsecs_str, min(sizeof(nsecs_str), 8UL - len), "%03lu",
+			 nsecs_rem);
 		ret = trace_seq_printf(s, ".%s", nsecs_str);
 		if (!ret)
 			return TRACE_TYPE_PARTIAL_LINE;
diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c
index 6fd486e0cef..73a6b0601f2 100644
--- a/kernel/trace/trace_irqsoff.c
+++ b/kernel/trace/trace_irqsoff.c
@@ -649,6 +649,7 @@ static struct tracer irqsoff_tracer __read_mostly =
 #endif
 	.open           = irqsoff_trace_open,
 	.close          = irqsoff_trace_close,
+	.use_max_tr	= 1,
 };
 # define register_irqsoff(trace) register_tracer(&trace)
 #else
@@ -681,6 +682,7 @@ static struct tracer preemptoff_tracer __read_mostly =
 #endif
 	.open		= irqsoff_trace_open,
 	.close		= irqsoff_trace_close,
+	.use_max_tr	= 1,
 };
 # define register_preemptoff(trace) register_tracer(&trace)
 #else
@@ -715,6 +717,7 @@ static struct tracer preemptirqsoff_tracer __read_mostly =
 #endif
 	.open		= irqsoff_trace_open,
 	.close		= irqsoff_trace_close,
+	.use_max_tr	= 1,
 };
 
 # define register_preemptirqsoff(trace) register_tracer(&trace)
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
new file mode 100644
index 00000000000..7b8ecd751d9
--- /dev/null
+++ b/kernel/trace/trace_kdb.c
@@ -0,0 +1,136 @@
+/*
+ * kdb helper for dumping the ftrace buffer
+ *
+ * Copyright (C) 2010 Jason Wessel <jason.wessel@windriver.com>
+ *
+ * ftrace_dump_buf based on ftrace_dump:
+ * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
+ * Copyright (C) 2008 Ingo Molnar <mingo@redhat.com>
+ *
+ */
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/kdb.h>
+#include <linux/ftrace.h>
+
+#include "../debug/kdb/kdb_private.h"
+#include "trace.h"
+#include "trace_output.h"
+
+static void ftrace_dump_buf(int skip_lines, long cpu_file)
+{
+	/* use static because iter can be a bit big for the stack */
+	static struct trace_iterator iter;
+	unsigned int old_userobj;
+	int cnt = 0, cpu;
+
+	trace_init_global_iter(&iter);
+
+	for_each_tracing_cpu(cpu) {
+		atomic_inc(&iter.tr->data[cpu]->disabled);
+	}
+
+	old_userobj = trace_flags;
+
+	/* don't look at user memory in panic mode */
+	trace_flags &= ~TRACE_ITER_SYM_USEROBJ;
+
+	kdb_printf("Dumping ftrace buffer:\n");
+
+	/* reset all but tr, trace, and overruns */
+	memset(&iter.seq, 0,
+		   sizeof(struct trace_iterator) -
+		   offsetof(struct trace_iterator, seq));
+	iter.iter_flags |= TRACE_FILE_LAT_FMT;
+	iter.pos = -1;
+
+	if (cpu_file == TRACE_PIPE_ALL_CPU) {
+		for_each_tracing_cpu(cpu) {
+			iter.buffer_iter[cpu] =
+			ring_buffer_read_prepare(iter.tr->buffer, cpu);
+			ring_buffer_read_start(iter.buffer_iter[cpu]);
+			tracing_iter_reset(&iter, cpu);
+		}
+	} else {
+		iter.cpu_file = cpu_file;
+		iter.buffer_iter[cpu_file] =
+			ring_buffer_read_prepare(iter.tr->buffer, cpu_file);
+		ring_buffer_read_start(iter.buffer_iter[cpu_file]);
+		tracing_iter_reset(&iter, cpu_file);
+	}
+	if (!trace_empty(&iter))
+		trace_find_next_entry_inc(&iter);
+	while (!trace_empty(&iter)) {
+		if (!cnt)
+			kdb_printf("---------------------------------\n");
+		cnt++;
+
+		if (trace_find_next_entry_inc(&iter) != NULL && !skip_lines)
+			print_trace_line(&iter);
+		if (!skip_lines)
+			trace_printk_seq(&iter.seq);
+		else
+			skip_lines--;
+		if (KDB_FLAG(CMD_INTERRUPT))
+			goto out;
+	}
+
+	if (!cnt)
+		kdb_printf("   (ftrace buffer empty)\n");
+	else
+		kdb_printf("---------------------------------\n");
+
+out:
+	trace_flags = old_userobj;
+
+	for_each_tracing_cpu(cpu) {
+		atomic_dec(&iter.tr->data[cpu]->disabled);
+	}
+
+	for_each_tracing_cpu(cpu)
+		if (iter.buffer_iter[cpu])
+			ring_buffer_read_finish(iter.buffer_iter[cpu]);
+}
+
+/*
+ * kdb_ftdump - Dump the ftrace log buffer
+ */
+static int kdb_ftdump(int argc, const char **argv)
+{
+	int skip_lines = 0;
+	long cpu_file;
+	char *cp;
+
+	if (argc > 2)
+		return KDB_ARGCOUNT;
+
+	if (argc) {
+		skip_lines = simple_strtol(argv[1], &cp, 0);
+		if (*cp)
+			skip_lines = 0;
+	}
+
+	if (argc == 2) {
+		cpu_file = simple_strtol(argv[2], &cp, 0);
+		if (*cp || cpu_file >= NR_CPUS || cpu_file < 0 ||
+		    !cpu_online(cpu_file))
+			return KDB_BADINT;
+	} else {
+		cpu_file = TRACE_PIPE_ALL_CPU;
+	}
+
+	kdb_trap_printk++;
+	ftrace_dump_buf(skip_lines, cpu_file);
+	kdb_trap_printk--;
+
+	return 0;
+}
+
+static __init int kdb_ftrace_register(void)
+{
+	kdb_register_repeat("ftdump", kdb_ftdump, "[skip_#lines] [cpu]",
+			    "Dump ftrace log", 0, KDB_REPEAT_NONE);
+	return 0;
+}
+
+late_initcall(kdb_ftrace_register);
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 58716e73e2a..52f032306c7 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -30,6 +30,8 @@
 #include <linux/ptrace.h>
 #include <linux/perf_event.h>
 #include <linux/stringify.h>
+#include <linux/limits.h>
+#include <linux/uaccess.h>
 #include <asm/bitsperlong.h>
 
 #include "trace.h"
@@ -38,6 +40,7 @@
 #define MAX_TRACE_ARGS 128
 #define MAX_ARGSTR_LEN 63
 #define MAX_EVENT_NAME_LEN 64
+#define MAX_STRING_SIZE PATH_MAX
 #define KPROBE_EVENT_SYSTEM "kprobes"
 
 /* Reserved field names */
@@ -58,14 +61,16 @@ const char *reserved_field_names[] = {
 };
 
 /* Printing function type */
-typedef int (*print_type_func_t)(struct trace_seq *, const char *, void *);
+typedef int (*print_type_func_t)(struct trace_seq *, const char *, void *,
+				 void *);
 #define PRINT_TYPE_FUNC_NAME(type)	print_type_##type
 #define PRINT_TYPE_FMT_NAME(type)	print_type_format_##type
 
 /* Printing  in basic type function template */
 #define DEFINE_BASIC_PRINT_TYPE_FUNC(type, fmt, cast)			\
 static __kprobes int PRINT_TYPE_FUNC_NAME(type)(struct trace_seq *s,	\
-						const char *name, void *data)\
+						const char *name,	\
+						void *data, void *ent)\
 {									\
 	return trace_seq_printf(s, " %s=" fmt, name, (cast)*(type *)data);\
 }									\
@@ -80,6 +85,49 @@ DEFINE_BASIC_PRINT_TYPE_FUNC(s16, "%d", int)
 DEFINE_BASIC_PRINT_TYPE_FUNC(s32, "%ld", long)
 DEFINE_BASIC_PRINT_TYPE_FUNC(s64, "%lld", long long)
 
+/* data_rloc: data relative location, compatible with u32 */
+#define make_data_rloc(len, roffs)	\
+	(((u32)(len) << 16) | ((u32)(roffs) & 0xffff))
+#define get_rloc_len(dl)	((u32)(dl) >> 16)
+#define get_rloc_offs(dl)	((u32)(dl) & 0xffff)
+
+static inline void *get_rloc_data(u32 *dl)
+{
+	return (u8 *)dl + get_rloc_offs(*dl);
+}
+
+/* For data_loc conversion */
+static inline void *get_loc_data(u32 *dl, void *ent)
+{
+	return (u8 *)ent + get_rloc_offs(*dl);
+}
+
+/*
+ * Convert data_rloc to data_loc:
+ *  data_rloc stores the offset from data_rloc itself, but data_loc
+ *  stores the offset from event entry.
+ */
+#define convert_rloc_to_loc(dl, offs)	((u32)(dl) + (offs))
+
+/* For defining macros, define string/string_size types */
+typedef u32 string;
+typedef u32 string_size;
+
+/* Print type function for string type */
+static __kprobes int PRINT_TYPE_FUNC_NAME(string)(struct trace_seq *s,
+						  const char *name,
+						  void *data, void *ent)
+{
+	int len = *(u32 *)data >> 16;
+
+	if (!len)
+		return trace_seq_printf(s, " %s=(fault)", name);
+	else
+		return trace_seq_printf(s, " %s=\"%s\"", name,
+					(const char *)get_loc_data(data, ent));
+}
+static const char PRINT_TYPE_FMT_NAME(string)[] = "\\\"%s\\\"";
+
 /* Data fetch function type */
 typedef	void (*fetch_func_t)(struct pt_regs *, void *, void *);
 
@@ -94,32 +142,38 @@ static __kprobes void call_fetch(struct fetch_param *fprm,
 	return fprm->fn(regs, fprm->data, dest);
 }
 
-#define FETCH_FUNC_NAME(kind, type)	fetch_##kind##_##type
+#define FETCH_FUNC_NAME(method, type)	fetch_##method##_##type
 /*
  * Define macro for basic types - we don't need to define s* types, because
  * we have to care only about bitwidth at recording time.
  */
-#define DEFINE_BASIC_FETCH_FUNCS(kind)  \
-DEFINE_FETCH_##kind(u8)			\
-DEFINE_FETCH_##kind(u16)		\
-DEFINE_FETCH_##kind(u32)		\
-DEFINE_FETCH_##kind(u64)
-
-#define CHECK_BASIC_FETCH_FUNCS(kind, fn)	\
-	((FETCH_FUNC_NAME(kind, u8) == fn) ||	\
-	 (FETCH_FUNC_NAME(kind, u16) == fn) ||	\
-	 (FETCH_FUNC_NAME(kind, u32) == fn) ||	\
-	 (FETCH_FUNC_NAME(kind, u64) == fn))
+#define DEFINE_BASIC_FETCH_FUNCS(method) \
+DEFINE_FETCH_##method(u8)		\
+DEFINE_FETCH_##method(u16)		\
+DEFINE_FETCH_##method(u32)		\
+DEFINE_FETCH_##method(u64)
+
+#define CHECK_FETCH_FUNCS(method, fn)			\
+	(((FETCH_FUNC_NAME(method, u8) == fn) ||	\
+	  (FETCH_FUNC_NAME(method, u16) == fn) ||	\
+	  (FETCH_FUNC_NAME(method, u32) == fn) ||	\
+	  (FETCH_FUNC_NAME(method, u64) == fn) ||	\
+	  (FETCH_FUNC_NAME(method, string) == fn) ||	\
+	  (FETCH_FUNC_NAME(method, string_size) == fn)) \
+	 && (fn != NULL))
 
 /* Data fetch function templates */
 #define DEFINE_FETCH_reg(type)						\
 static __kprobes void FETCH_FUNC_NAME(reg, type)(struct pt_regs *regs,	\
-					  void *offset, void *dest)	\
+					void *offset, void *dest)	\
 {									\
 	*(type *)dest = (type)regs_get_register(regs,			\
 				(unsigned int)((unsigned long)offset));	\
 }
 DEFINE_BASIC_FETCH_FUNCS(reg)
+/* No string on the register */
+#define fetch_reg_string NULL
+#define fetch_reg_string_size NULL
 
 #define DEFINE_FETCH_stack(type)					\
 static __kprobes void FETCH_FUNC_NAME(stack, type)(struct pt_regs *regs,\
@@ -129,6 +183,9 @@ static __kprobes void FETCH_FUNC_NAME(stack, type)(struct pt_regs *regs,\
 				(unsigned int)((unsigned long)offset));	\
 }
 DEFINE_BASIC_FETCH_FUNCS(stack)
+/* No string on the stack entry */
+#define fetch_stack_string NULL
+#define fetch_stack_string_size NULL
 
 #define DEFINE_FETCH_retval(type)					\
 static __kprobes void FETCH_FUNC_NAME(retval, type)(struct pt_regs *regs,\
@@ -137,6 +194,9 @@ static __kprobes void FETCH_FUNC_NAME(retval, type)(struct pt_regs *regs,\
 	*(type *)dest = (type)regs_return_value(regs);			\
 }
 DEFINE_BASIC_FETCH_FUNCS(retval)
+/* No string on the retval */
+#define fetch_retval_string NULL
+#define fetch_retval_string_size NULL
 
 #define DEFINE_FETCH_memory(type)					\
 static __kprobes void FETCH_FUNC_NAME(memory, type)(struct pt_regs *regs,\
@@ -149,6 +209,62 @@ static __kprobes void FETCH_FUNC_NAME(memory, type)(struct pt_regs *regs,\
 		*(type *)dest = retval;					\
 }
 DEFINE_BASIC_FETCH_FUNCS(memory)
+/*
+ * Fetch a null-terminated string. Caller MUST set *(u32 *)dest with max
+ * length and relative data location.
+ */
+static __kprobes void FETCH_FUNC_NAME(memory, string)(struct pt_regs *regs,
+						      void *addr, void *dest)
+{
+	long ret;
+	int maxlen = get_rloc_len(*(u32 *)dest);
+	u8 *dst = get_rloc_data(dest);
+	u8 *src = addr;
+	mm_segment_t old_fs = get_fs();
+	if (!maxlen)
+		return;
+	/*
+	 * Try to get string again, since the string can be changed while
+	 * probing.
+	 */
+	set_fs(KERNEL_DS);
+	pagefault_disable();
+	do
+		ret = __copy_from_user_inatomic(dst++, src++, 1);
+	while (dst[-1] && ret == 0 && src - (u8 *)addr < maxlen);
+	dst[-1] = '\0';
+	pagefault_enable();
+	set_fs(old_fs);
+
+	if (ret < 0) {	/* Failed to fetch string */
+		((u8 *)get_rloc_data(dest))[0] = '\0';
+		*(u32 *)dest = make_data_rloc(0, get_rloc_offs(*(u32 *)dest));
+	} else
+		*(u32 *)dest = make_data_rloc(src - (u8 *)addr,
+					      get_rloc_offs(*(u32 *)dest));
+}
+/* Return the length of string -- including null terminal byte */
+static __kprobes void FETCH_FUNC_NAME(memory, string_size)(struct pt_regs *regs,
+							void *addr, void *dest)
+{
+	int ret, len = 0;
+	u8 c;
+	mm_segment_t old_fs = get_fs();
+
+	set_fs(KERNEL_DS);
+	pagefault_disable();
+	do {
+		ret = __copy_from_user_inatomic(&c, (u8 *)addr + len, 1);
+		len++;
+	} while (c && ret == 0 && len < MAX_STRING_SIZE);
+	pagefault_enable();
+	set_fs(old_fs);
+
+	if (ret < 0)	/* Failed to check the length */
+		*(u32 *)dest = 0;
+	else
+		*(u32 *)dest = len;
+}
 
 /* Memory fetching by symbol */
 struct symbol_cache {
@@ -203,6 +319,8 @@ static __kprobes void FETCH_FUNC_NAME(symbol, type)(struct pt_regs *regs,\
 		*(type *)dest = 0;					\
 }
 DEFINE_BASIC_FETCH_FUNCS(symbol)
+DEFINE_FETCH_symbol(string)
+DEFINE_FETCH_symbol(string_size)
 
 /* Dereference memory access function */
 struct deref_fetch_param {
@@ -224,12 +342,14 @@ static __kprobes void FETCH_FUNC_NAME(deref, type)(struct pt_regs *regs,\
 		*(type *)dest = 0;					\
 }
 DEFINE_BASIC_FETCH_FUNCS(deref)
+DEFINE_FETCH_deref(string)
+DEFINE_FETCH_deref(string_size)
 
 static __kprobes void free_deref_fetch_param(struct deref_fetch_param *data)
 {
-	if (CHECK_BASIC_FETCH_FUNCS(deref, data->orig.fn))
+	if (CHECK_FETCH_FUNCS(deref, data->orig.fn))
 		free_deref_fetch_param(data->orig.data);
-	else if (CHECK_BASIC_FETCH_FUNCS(symbol, data->orig.fn))
+	else if (CHECK_FETCH_FUNCS(symbol, data->orig.fn))
 		free_symbol_cache(data->orig.data);
 	kfree(data);
 }
@@ -240,23 +360,43 @@ static __kprobes void free_deref_fetch_param(struct deref_fetch_param *data)
 #define DEFAULT_FETCH_TYPE _DEFAULT_FETCH_TYPE(BITS_PER_LONG)
 #define DEFAULT_FETCH_TYPE_STR __stringify(DEFAULT_FETCH_TYPE)
 
-#define ASSIGN_FETCH_FUNC(kind, type)	\
-	.kind = FETCH_FUNC_NAME(kind, type)
-
-#define ASSIGN_FETCH_TYPE(ptype, ftype, sign)	\
-	{.name = #ptype,			\
-	 .size = sizeof(ftype),			\
-	 .is_signed = sign,			\
-	 .print = PRINT_TYPE_FUNC_NAME(ptype),	\
-	 .fmt = PRINT_TYPE_FMT_NAME(ptype),	\
-ASSIGN_FETCH_FUNC(reg, ftype),			\
-ASSIGN_FETCH_FUNC(stack, ftype),		\
-ASSIGN_FETCH_FUNC(retval, ftype),		\
-ASSIGN_FETCH_FUNC(memory, ftype),		\
-ASSIGN_FETCH_FUNC(symbol, ftype),		\
-ASSIGN_FETCH_FUNC(deref, ftype),		\
+/* Fetch types */
+enum {
+	FETCH_MTD_reg = 0,
+	FETCH_MTD_stack,
+	FETCH_MTD_retval,
+	FETCH_MTD_memory,
+	FETCH_MTD_symbol,
+	FETCH_MTD_deref,
+	FETCH_MTD_END,
+};
+
+#define ASSIGN_FETCH_FUNC(method, type)	\
+	[FETCH_MTD_##method] = FETCH_FUNC_NAME(method, type)
+
+#define __ASSIGN_FETCH_TYPE(_name, ptype, ftype, _size, sign, _fmttype)	\
+	{.name = _name,				\
+	 .size = _size,					\
+	 .is_signed = sign,				\
+	 .print = PRINT_TYPE_FUNC_NAME(ptype),		\
+	 .fmt = PRINT_TYPE_FMT_NAME(ptype),		\
+	 .fmttype = _fmttype,				\
+	 .fetch = {					\
+ASSIGN_FETCH_FUNC(reg, ftype),				\
+ASSIGN_FETCH_FUNC(stack, ftype),			\
+ASSIGN_FETCH_FUNC(retval, ftype),			\
+ASSIGN_FETCH_FUNC(memory, ftype),			\
+ASSIGN_FETCH_FUNC(symbol, ftype),			\
+ASSIGN_FETCH_FUNC(deref, ftype),			\
+	  }						\
 	}
 
+#define ASSIGN_FETCH_TYPE(ptype, ftype, sign)			\
+	__ASSIGN_FETCH_TYPE(#ptype, ptype, ftype, sizeof(ftype), sign, #ptype)
+
+#define FETCH_TYPE_STRING 0
+#define FETCH_TYPE_STRSIZE 1
+
 /* Fetch type information table */
 static const struct fetch_type {
 	const char	*name;		/* Name of type */
@@ -264,14 +404,16 @@ static const struct fetch_type {
 	int		is_signed;	/* Signed flag */
 	print_type_func_t	print;	/* Print functions */
 	const char	*fmt;		/* Fromat string */
+	const char	*fmttype;	/* Name in format file */
 	/* Fetch functions */
-	fetch_func_t	reg;
-	fetch_func_t	stack;
-	fetch_func_t	retval;
-	fetch_func_t	memory;
-	fetch_func_t	symbol;
-	fetch_func_t	deref;
+	fetch_func_t	fetch[FETCH_MTD_END];
 } fetch_type_table[] = {
+	/* Special types */
+	[FETCH_TYPE_STRING] = __ASSIGN_FETCH_TYPE("string", string, string,
+					sizeof(u32), 1, "__data_loc char[]"),
+	[FETCH_TYPE_STRSIZE] = __ASSIGN_FETCH_TYPE("string_size", u32,
+					string_size, sizeof(u32), 0, "u32"),
+	/* Basic types */
 	ASSIGN_FETCH_TYPE(u8,  u8,  0),
 	ASSIGN_FETCH_TYPE(u16, u16, 0),
 	ASSIGN_FETCH_TYPE(u32, u32, 0),
@@ -302,12 +444,28 @@ static __kprobes void fetch_stack_address(struct pt_regs *regs,
 	*(unsigned long *)dest = kernel_stack_pointer(regs);
 }
 
+static fetch_func_t get_fetch_size_function(const struct fetch_type *type,
+					    fetch_func_t orig_fn)
+{
+	int i;
+
+	if (type != &fetch_type_table[FETCH_TYPE_STRING])
+		return NULL;	/* Only string type needs size function */
+	for (i = 0; i < FETCH_MTD_END; i++)
+		if (type->fetch[i] == orig_fn)
+			return fetch_type_table[FETCH_TYPE_STRSIZE].fetch[i];
+
+	WARN_ON(1);	/* This should not happen */
+	return NULL;
+}
+
 /**
  * Kprobe event core functions
  */
 
 struct probe_arg {
 	struct fetch_param	fetch;
+	struct fetch_param	fetch_size;
 	unsigned int		offset;	/* Offset from argument entry */
 	const char		*name;	/* Name of this argument */
 	const char		*comm;	/* Command of this argument */
@@ -429,9 +587,9 @@ error:
 
 static void free_probe_arg(struct probe_arg *arg)
 {
-	if (CHECK_BASIC_FETCH_FUNCS(deref, arg->fetch.fn))
+	if (CHECK_FETCH_FUNCS(deref, arg->fetch.fn))
 		free_deref_fetch_param(arg->fetch.data);
-	else if (CHECK_BASIC_FETCH_FUNCS(symbol, arg->fetch.fn))
+	else if (CHECK_FETCH_FUNCS(symbol, arg->fetch.fn))
 		free_symbol_cache(arg->fetch.data);
 	kfree(arg->name);
 	kfree(arg->comm);
@@ -548,7 +706,7 @@ static int parse_probe_vars(char *arg, const struct fetch_type *t,
 
 	if (strcmp(arg, "retval") == 0) {
 		if (is_return)
-			f->fn = t->retval;
+			f->fn = t->fetch[FETCH_MTD_retval];
 		else
 			ret = -EINVAL;
 	} else if (strncmp(arg, "stack", 5) == 0) {
@@ -562,7 +720,7 @@ static int parse_probe_vars(char *arg, const struct fetch_type *t,
 			if (ret || param > PARAM_MAX_STACK)
 				ret = -EINVAL;
 			else {
-				f->fn = t->stack;
+				f->fn = t->fetch[FETCH_MTD_stack];
 				f->data = (void *)param;
 			}
 		} else
@@ -588,7 +746,7 @@ static int __parse_probe_arg(char *arg, const struct fetch_type *t,
 	case '%':	/* named register */
 		ret = regs_query_register_offset(arg + 1);
 		if (ret >= 0) {
-			f->fn = t->reg;
+			f->fn = t->fetch[FETCH_MTD_reg];
 			f->data = (void *)(unsigned long)ret;
 			ret = 0;
 		}
@@ -598,7 +756,7 @@ static int __parse_probe_arg(char *arg, const struct fetch_type *t,
 			ret = strict_strtoul(arg + 1, 0, &param);
 			if (ret)
 				break;
-			f->fn = t->memory;
+			f->fn = t->fetch[FETCH_MTD_memory];
 			f->data = (void *)param;
 		} else {
 			ret = split_symbol_offset(arg + 1, &offset);
@@ -606,7 +764,7 @@ static int __parse_probe_arg(char *arg, const struct fetch_type *t,
 				break;
 			f->data = alloc_symbol_cache(arg + 1, offset);
 			if (f->data)
-				f->fn = t->symbol;
+				f->fn = t->fetch[FETCH_MTD_symbol];
 		}
 		break;
 	case '+':	/* deref memory */
@@ -636,14 +794,17 @@ static int __parse_probe_arg(char *arg, const struct fetch_type *t,
 			if (ret)
 				kfree(dprm);
 			else {
-				f->fn = t->deref;
+				f->fn = t->fetch[FETCH_MTD_deref];
 				f->data = (void *)dprm;
 			}
 		}
 		break;
 	}
-	if (!ret && !f->fn)
+	if (!ret && !f->fn) {	/* Parsed, but do not find fetch method */
+		pr_info("%s type has no corresponding fetch method.\n",
+			t->name);
 		ret = -EINVAL;
+	}
 	return ret;
 }
 
@@ -652,6 +813,7 @@ static int parse_probe_arg(char *arg, struct trace_probe *tp,
 			   struct probe_arg *parg, int is_return)
 {
 	const char *t;
+	int ret;
 
 	if (strlen(arg) > MAX_ARGSTR_LEN) {
 		pr_info("Argument is too long.: %s\n",  arg);
@@ -674,7 +836,13 @@ static int parse_probe_arg(char *arg, struct trace_probe *tp,
 	}
 	parg->offset = tp->size;
 	tp->size += parg->type->size;
-	return __parse_probe_arg(arg, parg->type, &parg->fetch, is_return);
+	ret = __parse_probe_arg(arg, parg->type, &parg->fetch, is_return);
+	if (ret >= 0) {
+		parg->fetch_size.fn = get_fetch_size_function(parg->type,
+							      parg->fetch.fn);
+		parg->fetch_size.data = parg->fetch.data;
+	}
+	return ret;
 }
 
 /* Return 1 if name is reserved or already used by another argument */
@@ -757,14 +925,17 @@ static int create_trace_probe(int argc, char **argv)
 			pr_info("Delete command needs an event name.\n");
 			return -EINVAL;
 		}
+		mutex_lock(&probe_lock);
 		tp = find_probe_event(event, group);
 		if (!tp) {
+			mutex_unlock(&probe_lock);
 			pr_info("Event %s/%s doesn't exist.\n", group, event);
 			return -ENOENT;
 		}
 		/* delete an event */
 		unregister_trace_probe(tp);
 		free_trace_probe(tp);
+		mutex_unlock(&probe_lock);
 		return 0;
 	}
 
@@ -1043,6 +1214,54 @@ static const struct file_operations kprobe_profile_ops = {
 	.release        = seq_release,
 };
 
+/* Sum up total data length for dynamic arraies (strings) */
+static __kprobes int __get_data_size(struct trace_probe *tp,
+				     struct pt_regs *regs)
+{
+	int i, ret = 0;
+	u32 len;
+
+	for (i = 0; i < tp->nr_args; i++)
+		if (unlikely(tp->args[i].fetch_size.fn)) {
+			call_fetch(&tp->args[i].fetch_size, regs, &len);
+			ret += len;
+		}
+
+	return ret;
+}
+
+/* Store the value of each argument */
+static __kprobes void store_trace_args(int ent_size, struct trace_probe *tp,
+				       struct pt_regs *regs,
+				       u8 *data, int maxlen)
+{
+	int i;
+	u32 end = tp->size;
+	u32 *dl;	/* Data (relative) location */
+
+	for (i = 0; i < tp->nr_args; i++) {
+		if (unlikely(tp->args[i].fetch_size.fn)) {
+			/*
+			 * First, we set the relative location and
+			 * maximum data length to *dl
+			 */
+			dl = (u32 *)(data + tp->args[i].offset);
+			*dl = make_data_rloc(maxlen, end - tp->args[i].offset);
+			/* Then try to fetch string or dynamic array data */
+			call_fetch(&tp->args[i].fetch, regs, dl);
+			/* Reduce maximum length */
+			end += get_rloc_len(*dl);
+			maxlen -= get_rloc_len(*dl);
+			/* Trick here, convert data_rloc to data_loc */
+			*dl = convert_rloc_to_loc(*dl,
+				 ent_size + tp->args[i].offset);
+		} else
+			/* Just fetching data normally */
+			call_fetch(&tp->args[i].fetch, regs,
+				   data + tp->args[i].offset);
+	}
+}
+
 /* Kprobe handler */
 static __kprobes void kprobe_trace_func(struct kprobe *kp, struct pt_regs *regs)
 {
@@ -1050,8 +1269,7 @@ static __kprobes void kprobe_trace_func(struct kprobe *kp, struct pt_regs *regs)
 	struct kprobe_trace_entry_head *entry;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
-	u8 *data;
-	int size, i, pc;
+	int size, dsize, pc;
 	unsigned long irq_flags;
 	struct ftrace_event_call *call = &tp->call;
 
@@ -1060,7 +1278,8 @@ static __kprobes void kprobe_trace_func(struct kprobe *kp, struct pt_regs *regs)
 	local_save_flags(irq_flags);
 	pc = preempt_count();
 
-	size = sizeof(*entry) + tp->size;
+	dsize = __get_data_size(tp, regs);
+	size = sizeof(*entry) + tp->size + dsize;
 
 	event = trace_current_buffer_lock_reserve(&buffer, call->event.type,
 						  size, irq_flags, pc);
@@ -1069,9 +1288,7 @@ static __kprobes void kprobe_trace_func(struct kprobe *kp, struct pt_regs *regs)
 
 	entry = ring_buffer_event_data(event);
 	entry->ip = (unsigned long)kp->addr;
-	data = (u8 *)&entry[1];
-	for (i = 0; i < tp->nr_args; i++)
-		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
+	store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
 
 	if (!filter_current_check_discard(buffer, call, entry, event))
 		trace_nowake_buffer_unlock_commit(buffer, event, irq_flags, pc);
@@ -1085,15 +1302,15 @@ static __kprobes void kretprobe_trace_func(struct kretprobe_instance *ri,
 	struct kretprobe_trace_entry_head *entry;
 	struct ring_buffer_event *event;
 	struct ring_buffer *buffer;
-	u8 *data;
-	int size, i, pc;
+	int size, pc, dsize;
 	unsigned long irq_flags;
 	struct ftrace_event_call *call = &tp->call;
 
 	local_save_flags(irq_flags);
 	pc = preempt_count();
 
-	size = sizeof(*entry) + tp->size;
+	dsize = __get_data_size(tp, regs);
+	size = sizeof(*entry) + tp->size + dsize;
 
 	event = trace_current_buffer_lock_reserve(&buffer, call->event.type,
 						  size, irq_flags, pc);
@@ -1103,9 +1320,7 @@ static __kprobes void kretprobe_trace_func(struct kretprobe_instance *ri,
 	entry = ring_buffer_event_data(event);
 	entry->func = (unsigned long)tp->rp.kp.addr;
 	entry->ret_ip = (unsigned long)ri->ret_addr;
-	data = (u8 *)&entry[1];
-	for (i = 0; i < tp->nr_args; i++)
-		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
+	store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
 
 	if (!filter_current_check_discard(buffer, call, entry, event))
 		trace_nowake_buffer_unlock_commit(buffer, event, irq_flags, pc);
@@ -1137,7 +1352,7 @@ print_kprobe_event(struct trace_iterator *iter, int flags,
 	data = (u8 *)&field[1];
 	for (i = 0; i < tp->nr_args; i++)
 		if (!tp->args[i].type->print(s, tp->args[i].name,
-					     data + tp->args[i].offset))
+					     data + tp->args[i].offset, field))
 			goto partial;
 
 	if (!trace_seq_puts(s, "\n"))
@@ -1179,7 +1394,7 @@ print_kretprobe_event(struct trace_iterator *iter, int flags,
 	data = (u8 *)&field[1];
 	for (i = 0; i < tp->nr_args; i++)
 		if (!tp->args[i].type->print(s, tp->args[i].name,
-					     data + tp->args[i].offset))
+					     data + tp->args[i].offset, field))
 			goto partial;
 
 	if (!trace_seq_puts(s, "\n"))
@@ -1214,11 +1429,6 @@ static void probe_event_disable(struct ftrace_event_call *call)
 	}
 }
 
-static int probe_event_raw_init(struct ftrace_event_call *event_call)
-{
-	return 0;
-}
-
 #undef DEFINE_FIELD
 #define DEFINE_FIELD(type, item, name, is_signed)			\
 	do {								\
@@ -1239,7 +1449,7 @@ static int kprobe_event_define_fields(struct ftrace_event_call *event_call)
 	DEFINE_FIELD(unsigned long, ip, FIELD_STRING_IP, 0);
 	/* Set argument names as fields */
 	for (i = 0; i < tp->nr_args; i++) {
-		ret = trace_define_field(event_call, tp->args[i].type->name,
+		ret = trace_define_field(event_call, tp->args[i].type->fmttype,
 					 tp->args[i].name,
 					 sizeof(field) + tp->args[i].offset,
 					 tp->args[i].type->size,
@@ -1261,7 +1471,7 @@ static int kretprobe_event_define_fields(struct ftrace_event_call *event_call)
 	DEFINE_FIELD(unsigned long, ret_ip, FIELD_STRING_RETIP, 0);
 	/* Set argument names as fields */
 	for (i = 0; i < tp->nr_args; i++) {
-		ret = trace_define_field(event_call, tp->args[i].type->name,
+		ret = trace_define_field(event_call, tp->args[i].type->fmttype,
 					 tp->args[i].name,
 					 sizeof(field) + tp->args[i].offset,
 					 tp->args[i].type->size,
@@ -1301,8 +1511,13 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len)
 	pos += snprintf(buf + pos, LEN_OR_ZERO, "\", %s", arg);
 
 	for (i = 0; i < tp->nr_args; i++) {
-		pos += snprintf(buf + pos, LEN_OR_ZERO, ", REC->%s",
-				tp->args[i].name);
+		if (strcmp(tp->args[i].type->name, "string") == 0)
+			pos += snprintf(buf + pos, LEN_OR_ZERO,
+					", __get_str(%s)",
+					tp->args[i].name);
+		else
+			pos += snprintf(buf + pos, LEN_OR_ZERO, ", REC->%s",
+					tp->args[i].name);
 	}
 
 #undef LEN_OR_ZERO
@@ -1339,11 +1554,11 @@ static __kprobes void kprobe_perf_func(struct kprobe *kp,
 	struct ftrace_event_call *call = &tp->call;
 	struct kprobe_trace_entry_head *entry;
 	struct hlist_head *head;
-	u8 *data;
-	int size, __size, i;
+	int size, __size, dsize;
 	int rctx;
 
-	__size = sizeof(*entry) + tp->size;
+	dsize = __get_data_size(tp, regs);
+	__size = sizeof(*entry) + tp->size + dsize;
 	size = ALIGN(__size + sizeof(u32), sizeof(u64));
 	size -= sizeof(u32);
 	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
@@ -1355,9 +1570,8 @@ static __kprobes void kprobe_perf_func(struct kprobe *kp,
 		return;
 
 	entry->ip = (unsigned long)kp->addr;
-	data = (u8 *)&entry[1];
-	for (i = 0; i < tp->nr_args; i++)
-		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
+	memset(&entry[1], 0, dsize);
+	store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
 
 	head = this_cpu_ptr(call->perf_events);
 	perf_trace_buf_submit(entry, size, rctx, entry->ip, 1, regs, head);
@@ -1371,11 +1585,11 @@ static __kprobes void kretprobe_perf_func(struct kretprobe_instance *ri,
 	struct ftrace_event_call *call = &tp->call;
 	struct kretprobe_trace_entry_head *entry;
 	struct hlist_head *head;
-	u8 *data;
-	int size, __size, i;
+	int size, __size, dsize;
 	int rctx;
 
-	__size = sizeof(*entry) + tp->size;
+	dsize = __get_data_size(tp, regs);
+	__size = sizeof(*entry) + tp->size + dsize;
 	size = ALIGN(__size + sizeof(u32), sizeof(u64));
 	size -= sizeof(u32);
 	if (WARN_ONCE(size > PERF_MAX_TRACE_SIZE,
@@ -1388,9 +1602,7 @@ static __kprobes void kretprobe_perf_func(struct kretprobe_instance *ri,
 
 	entry->func = (unsigned long)tp->rp.kp.addr;
 	entry->ret_ip = (unsigned long)ri->ret_addr;
-	data = (u8 *)&entry[1];
-	for (i = 0; i < tp->nr_args; i++)
-		call_fetch(&tp->args[i].fetch, regs, data + tp->args[i].offset);
+	store_trace_args(sizeof(*entry), tp, regs, (u8 *)&entry[1], dsize);
 
 	head = this_cpu_ptr(call->perf_events);
 	perf_trace_buf_submit(entry, size, rctx, entry->ret_ip, 1, regs, head);
@@ -1486,15 +1698,12 @@ static int register_probe_event(struct trace_probe *tp)
 	int ret;
 
 	/* Initialize ftrace_event_call */
+	INIT_LIST_HEAD(&call->class->fields);
 	if (probe_is_return(tp)) {
-		INIT_LIST_HEAD(&call->class->fields);
 		call->event.funcs = &kretprobe_funcs;
-		call->class->raw_init = probe_event_raw_init;
 		call->class->define_fields = kretprobe_event_define_fields;
 	} else {
-		INIT_LIST_HEAD(&call->class->fields);
 		call->event.funcs = &kprobe_funcs;
-		call->class->raw_init = probe_event_raw_init;
 		call->class->define_fields = kprobe_event_define_fields;
 	}
 	if (set_print_fmt(tp) < 0)
diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c
deleted file mode 100644
index 8eaf00749b6..00000000000
--- a/kernel/trace/trace_ksym.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * trace_ksym.c - Kernel Symbol Tracer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) IBM Corporation, 2009
- */
-
-#include <linux/kallsyms.h>
-#include <linux/uaccess.h>
-#include <linux/debugfs.h>
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-
-#include "trace_output.h"
-#include "trace.h"
-
-#include <linux/hw_breakpoint.h>
-#include <asm/hw_breakpoint.h>
-
-#include <asm/atomic.h>
-
-#define KSYM_TRACER_OP_LEN 3 /* rw- */
-
-struct trace_ksym {
-	struct perf_event	**ksym_hbp;
-	struct perf_event_attr	attr;
-#ifdef CONFIG_PROFILE_KSYM_TRACER
-	atomic64_t		counter;
-#endif
-	struct hlist_node	ksym_hlist;
-};
-
-static struct trace_array *ksym_trace_array;
-
-static unsigned int ksym_tracing_enabled;
-
-static HLIST_HEAD(ksym_filter_head);
-
-static DEFINE_MUTEX(ksym_tracer_mutex);
-
-#ifdef CONFIG_PROFILE_KSYM_TRACER
-
-#define MAX_UL_INT 0xffffffff
-
-void ksym_collect_stats(unsigned long hbp_hit_addr)
-{
-	struct hlist_node *node;
-	struct trace_ksym *entry;
-
-	rcu_read_lock();
-	hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) {
-		if (entry->attr.bp_addr == hbp_hit_addr) {
-			atomic64_inc(&entry->counter);
-			break;
-		}
-	}
-	rcu_read_unlock();
-}
-#endif /* CONFIG_PROFILE_KSYM_TRACER */
-
-void ksym_hbp_handler(struct perf_event *hbp, int nmi,
-		      struct perf_sample_data *data,
-		      struct pt_regs *regs)
-{
-	struct ring_buffer_event *event;
-	struct ksym_trace_entry *entry;
-	struct ring_buffer *buffer;
-	int pc;
-
-	if (!ksym_tracing_enabled)
-		return;
-
-	buffer = ksym_trace_array->buffer;
-
-	pc = preempt_count();
-
-	event = trace_buffer_lock_reserve(buffer, TRACE_KSYM,
-							sizeof(*entry), 0, pc);
-	if (!event)
-		return;
-
-	entry		= ring_buffer_event_data(event);
-	entry->ip	= instruction_pointer(regs);
-	entry->type	= hw_breakpoint_type(hbp);
-	entry->addr	= hw_breakpoint_addr(hbp);
-	strlcpy(entry->cmd, current->comm, TASK_COMM_LEN);
-
-#ifdef CONFIG_PROFILE_KSYM_TRACER
-	ksym_collect_stats(hw_breakpoint_addr(hbp));
-#endif /* CONFIG_PROFILE_KSYM_TRACER */
-
-	trace_buffer_unlock_commit(buffer, event, 0, pc);
-}
-
-/* Valid access types are represented as
- *
- * rw- : Set Read/Write Access Breakpoint
- * -w- : Set Write Access Breakpoint
- * --- : Clear Breakpoints
- * --x : Set Execution Break points (Not available yet)
- *
- */
-static int ksym_trace_get_access_type(char *str)
-{
-	int access = 0;
-
-	if (str[0] == 'r')
-		access |= HW_BREAKPOINT_R;
-
-	if (str[1] == 'w')
-		access |= HW_BREAKPOINT_W;
-
-	if (str[2] == 'x')
-		access |= HW_BREAKPOINT_X;
-
-	switch (access) {
-	case HW_BREAKPOINT_R:
-	case HW_BREAKPOINT_W:
-	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
-		return access;
-	default:
-		return -EINVAL;
-	}
-}
-
-/*
- * There can be several possible malformed requests and we attempt to capture
- * all of them. We enumerate some of the rules
- * 1. We will not allow kernel symbols with ':' since it is used as a delimiter.
- *    i.e. multiple ':' symbols disallowed. Possible uses are of the form
- *    <module>:<ksym_name>:<op>.
- * 2. No delimiter symbol ':' in the input string
- * 3. Spurious operator symbols or symbols not in their respective positions
- * 4. <ksym_name>:--- i.e. clear breakpoint request when ksym_name not in file
- * 5. Kernel symbol not a part of /proc/kallsyms
- * 6. Duplicate requests
- */
-static int parse_ksym_trace_str(char *input_string, char **ksymname,
-							unsigned long *addr)
-{
-	int ret;
-
-	*ksymname = strsep(&input_string, ":");
-	*addr = kallsyms_lookup_name(*ksymname);
-
-	/* Check for malformed request: (2), (1) and (5) */
-	if ((!input_string) ||
-	    (strlen(input_string) != KSYM_TRACER_OP_LEN) ||
-	    (*addr == 0))
-		return -EINVAL;;
-
-	ret = ksym_trace_get_access_type(input_string);
-
-	return ret;
-}
-
-int process_new_ksym_entry(char *ksymname, int op, unsigned long addr)
-{
-	struct trace_ksym *entry;
-	int ret = -ENOMEM;
-
-	entry = kzalloc(sizeof(struct trace_ksym), GFP_KERNEL);
-	if (!entry)
-		return -ENOMEM;
-
-	hw_breakpoint_init(&entry->attr);
-
-	entry->attr.bp_type = op;
-	entry->attr.bp_addr = addr;
-	entry->attr.bp_len = HW_BREAKPOINT_LEN_4;
-
-	entry->ksym_hbp = register_wide_hw_breakpoint(&entry->attr,
-					ksym_hbp_handler);
-
-	if (IS_ERR(entry->ksym_hbp)) {
-		ret = PTR_ERR(entry->ksym_hbp);
-		if (ret == -ENOSPC) {
-			printk(KERN_ERR "ksym_tracer: Maximum limit reached."
-			" No new requests for tracing can be accepted now.\n");
-		} else {
-			printk(KERN_INFO "ksym_tracer request failed. Try again"
-					 " later!!\n");
-		}
-		goto err;
-	}
-
-	hlist_add_head_rcu(&(entry->ksym_hlist), &ksym_filter_head);
-
-	return 0;
-
-err:
-	kfree(entry);
-
-	return ret;
-}
-
-static ssize_t ksym_trace_filter_read(struct file *filp, char __user *ubuf,
-						size_t count, loff_t *ppos)
-{
-	struct trace_ksym *entry;
-	struct hlist_node *node;
-	struct trace_seq *s;
-	ssize_t cnt = 0;
-	int ret;
-
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (!s)
-		return -ENOMEM;
-	trace_seq_init(s);
-
-	mutex_lock(&ksym_tracer_mutex);
-
-	hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
-		ret = trace_seq_printf(s, "%pS:",
-				(void *)(unsigned long)entry->attr.bp_addr);
-		if (entry->attr.bp_type == HW_BREAKPOINT_R)
-			ret = trace_seq_puts(s, "r--\n");
-		else if (entry->attr.bp_type == HW_BREAKPOINT_W)
-			ret = trace_seq_puts(s, "-w-\n");
-		else if (entry->attr.bp_type == (HW_BREAKPOINT_W | HW_BREAKPOINT_R))
-			ret = trace_seq_puts(s, "rw-\n");
-		WARN_ON_ONCE(!ret);
-	}
-
-	cnt = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
-
-	mutex_unlock(&ksym_tracer_mutex);
-
-	kfree(s);
-
-	return cnt;
-}
-
-static void __ksym_trace_reset(void)
-{
-	struct trace_ksym *entry;
-	struct hlist_node *node, *node1;
-
-	mutex_lock(&ksym_tracer_mutex);
-	hlist_for_each_entry_safe(entry, node, node1, &ksym_filter_head,
-								ksym_hlist) {
-		unregister_wide_hw_breakpoint(entry->ksym_hbp);
-		hlist_del_rcu(&(entry->ksym_hlist));
-		synchronize_rcu();
-		kfree(entry);
-	}
-	mutex_unlock(&ksym_tracer_mutex);
-}
-
-static ssize_t ksym_trace_filter_write(struct file *file,
-					const char __user *buffer,
-						size_t count, loff_t *ppos)
-{
-	struct trace_ksym *entry;
-	struct hlist_node *node;
-	char *buf, *input_string, *ksymname = NULL;
-	unsigned long ksym_addr = 0;
-	int ret, op, changed = 0;
-
-	buf = kzalloc(count + 1, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	if (copy_from_user(buf, buffer, count))
-		goto out;
-
-	buf[count] = '\0';
-	input_string = strstrip(buf);
-
-	/*
-	 * Clear all breakpoints if:
-	 * 1: echo > ksym_trace_filter
-	 * 2: echo 0 > ksym_trace_filter
-	 * 3: echo "*:---" > ksym_trace_filter
-	 */
-	if (!input_string[0] || !strcmp(input_string, "0") ||
-	    !strcmp(input_string, "*:---")) {
-		__ksym_trace_reset();
-		ret = 0;
-		goto out;
-	}
-
-	ret = op = parse_ksym_trace_str(input_string, &ksymname, &ksym_addr);
-	if (ret < 0)
-		goto out;
-
-	mutex_lock(&ksym_tracer_mutex);
-
-	ret = -EINVAL;
-	hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
-		if (entry->attr.bp_addr == ksym_addr) {
-			/* Check for malformed request: (6) */
-			if (entry->attr.bp_type != op)
-				changed = 1;
-			else
-				goto out_unlock;
-			break;
-		}
-	}
-	if (changed) {
-		unregister_wide_hw_breakpoint(entry->ksym_hbp);
-		entry->attr.bp_type = op;
-		ret = 0;
-		if (op > 0) {
-			entry->ksym_hbp =
-				register_wide_hw_breakpoint(&entry->attr,
-					ksym_hbp_handler);
-			if (IS_ERR(entry->ksym_hbp))
-				ret = PTR_ERR(entry->ksym_hbp);
-			else
-				goto out_unlock;
-		}
-		/* Error or "symbol:---" case: drop it */
-		hlist_del_rcu(&(entry->ksym_hlist));
-		synchronize_rcu();
-		kfree(entry);
-		goto out_unlock;
-	} else {
-		/* Check for malformed request: (4) */
-		if (op)
-			ret = process_new_ksym_entry(ksymname, op, ksym_addr);
-	}
-out_unlock:
-	mutex_unlock(&ksym_tracer_mutex);
-out:
-	kfree(buf);
-	return !ret ? count : ret;
-}
-
-static const struct file_operations ksym_tracing_fops = {
-	.open		= tracing_open_generic,
-	.read		= ksym_trace_filter_read,
-	.write		= ksym_trace_filter_write,
-};
-
-static void ksym_trace_reset(struct trace_array *tr)
-{
-	ksym_tracing_enabled = 0;
-	__ksym_trace_reset();
-}
-
-static int ksym_trace_init(struct trace_array *tr)
-{
-	int cpu, ret = 0;
-
-	for_each_online_cpu(cpu)
-		tracing_reset(tr, cpu);
-	ksym_tracing_enabled = 1;
-	ksym_trace_array = tr;
-
-	return ret;
-}
-
-static void ksym_trace_print_header(struct seq_file *m)
-{
-	seq_puts(m,
-		 "#       TASK-PID   CPU#      Symbol                    "
-		 "Type    Function\n");
-	seq_puts(m,
-		 "#          |        |          |                       "
-		 " |         |\n");
-}
-
-static enum print_line_t ksym_trace_output(struct trace_iterator *iter)
-{
-	struct trace_entry *entry = iter->ent;
-	struct trace_seq *s = &iter->seq;
-	struct ksym_trace_entry *field;
-	char str[KSYM_SYMBOL_LEN];
-	int ret;
-
-	if (entry->type != TRACE_KSYM)
-		return TRACE_TYPE_UNHANDLED;
-
-	trace_assign_type(field, entry);
-
-	ret = trace_seq_printf(s, "%11s-%-5d [%03d] %pS", field->cmd,
-				entry->pid, iter->cpu, (char *)field->addr);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	switch (field->type) {
-	case HW_BREAKPOINT_R:
-		ret = trace_seq_printf(s, " R  ");
-		break;
-	case HW_BREAKPOINT_W:
-		ret = trace_seq_printf(s, " W  ");
-		break;
-	case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
-		ret = trace_seq_printf(s, " RW ");
-		break;
-	default:
-		return TRACE_TYPE_PARTIAL_LINE;
-	}
-
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	sprint_symbol(str, field->ip);
-	ret = trace_seq_printf(s, "%s\n", str);
-	if (!ret)
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-struct tracer ksym_tracer __read_mostly =
-{
-	.name		= "ksym_tracer",
-	.init		= ksym_trace_init,
-	.reset		= ksym_trace_reset,
-#ifdef CONFIG_FTRACE_SELFTEST
-	.selftest	= trace_selftest_startup_ksym,
-#endif
-	.print_header   = ksym_trace_print_header,
-	.print_line	= ksym_trace_output
-};
-
-#ifdef CONFIG_PROFILE_KSYM_TRACER
-static int ksym_profile_show(struct seq_file *m, void *v)
-{
-	struct hlist_node *node;
-	struct trace_ksym *entry;
-	int access_type = 0;
-	char fn_name[KSYM_NAME_LEN];
-
-	seq_puts(m, "  Access Type ");
-	seq_puts(m, "  Symbol                                       Counter\n");
-	seq_puts(m, "  ----------- ");
-	seq_puts(m, "  ------                                       -------\n");
-
-	rcu_read_lock();
-	hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) {
-
-		access_type = entry->attr.bp_type;
-
-		switch (access_type) {
-		case HW_BREAKPOINT_R:
-			seq_puts(m, "  R           ");
-			break;
-		case HW_BREAKPOINT_W:
-			seq_puts(m, "  W           ");
-			break;
-		case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
-			seq_puts(m, "  RW          ");
-			break;
-		default:
-			seq_puts(m, "  NA          ");
-		}
-
-		if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0)
-			seq_printf(m, "  %-36s", fn_name);
-		else
-			seq_printf(m, "  %-36s", "<NA>");
-		seq_printf(m, " %15llu\n",
-			   (unsigned long long)atomic64_read(&entry->counter));
-	}
-	rcu_read_unlock();
-
-	return 0;
-}
-
-static int ksym_profile_open(struct inode *node, struct file *file)
-{
-	return single_open(file, ksym_profile_show, NULL);
-}
-
-static const struct file_operations ksym_profile_fops = {
-	.open		= ksym_profile_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif /* CONFIG_PROFILE_KSYM_TRACER */
-
-__init static int init_ksym_trace(void)
-{
-	struct dentry *d_tracer;
-
-	d_tracer = tracing_init_dentry();
-
-	trace_create_file("ksym_trace_filter", 0644, d_tracer,
-			  NULL, &ksym_tracing_fops);
-
-#ifdef CONFIG_PROFILE_KSYM_TRACER
-	trace_create_file("ksym_profile", 0444, d_tracer,
-			  NULL, &ksym_profile_fops);
-#endif
-
-	return register_tracer(&ksym_tracer);
-}
-device_initcall(init_ksym_trace);
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 57c1b459647..02272baa220 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -16,9 +16,6 @@
 
 DECLARE_RWSEM(trace_event_mutex);
 
-DEFINE_PER_CPU(struct trace_seq, ftrace_event_seq);
-EXPORT_PER_CPU_SYMBOL(ftrace_event_seq);
-
 static struct hlist_head event_hash[EVENT_HASHSIZE] __read_mostly;
 
 static int next_event_type = __TRACE_LAST_TYPE + 1;
@@ -1069,65 +1066,6 @@ static struct trace_event trace_wake_event = {
 	.funcs		= &trace_wake_funcs,
 };
 
-/* TRACE_SPECIAL */
-static enum print_line_t trace_special_print(struct trace_iterator *iter,
-					     int flags, struct trace_event *event)
-{
-	struct special_entry *field;
-
-	trace_assign_type(field, iter->ent);
-
-	if (!trace_seq_printf(&iter->seq, "# %ld %ld %ld\n",
-			      field->arg1,
-			      field->arg2,
-			      field->arg3))
-		return TRACE_TYPE_PARTIAL_LINE;
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t trace_special_hex(struct trace_iterator *iter,
-					   int flags, struct trace_event *event)
-{
-	struct special_entry *field;
-	struct trace_seq *s = &iter->seq;
-
-	trace_assign_type(field, iter->ent);
-
-	SEQ_PUT_HEX_FIELD_RET(s, field->arg1);
-	SEQ_PUT_HEX_FIELD_RET(s, field->arg2);
-	SEQ_PUT_HEX_FIELD_RET(s, field->arg3);
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static enum print_line_t trace_special_bin(struct trace_iterator *iter,
-					   int flags, struct trace_event *event)
-{
-	struct special_entry *field;
-	struct trace_seq *s = &iter->seq;
-
-	trace_assign_type(field, iter->ent);
-
-	SEQ_PUT_FIELD_RET(s, field->arg1);
-	SEQ_PUT_FIELD_RET(s, field->arg2);
-	SEQ_PUT_FIELD_RET(s, field->arg3);
-
-	return TRACE_TYPE_HANDLED;
-}
-
-static struct trace_event_functions trace_special_funcs = {
-	.trace		= trace_special_print,
-	.raw		= trace_special_print,
-	.hex		= trace_special_hex,
-	.binary		= trace_special_bin,
-};
-
-static struct trace_event trace_special_event = {
-	.type		= TRACE_SPECIAL,
-	.funcs		= &trace_special_funcs,
-};
-
 /* TRACE_STACK */
 
 static enum print_line_t trace_stack_print(struct trace_iterator *iter,
@@ -1161,9 +1099,6 @@ static enum print_line_t trace_stack_print(struct trace_iterator *iter,
 
 static struct trace_event_functions trace_stack_funcs = {
 	.trace		= trace_stack_print,
-	.raw		= trace_special_print,
-	.hex		= trace_special_hex,
-	.binary		= trace_special_bin,
 };
 
 static struct trace_event trace_stack_event = {
@@ -1194,9 +1129,6 @@ static enum print_line_t trace_user_stack_print(struct trace_iterator *iter,
 
 static struct trace_event_functions trace_user_stack_funcs = {
 	.trace		= trace_user_stack_print,
-	.raw		= trace_special_print,
-	.hex		= trace_special_hex,
-	.binary		= trace_special_bin,
 };
 
 static struct trace_event trace_user_stack_event = {
@@ -1314,7 +1246,6 @@ static struct trace_event *events[] __initdata = {
 	&trace_fn_event,
 	&trace_ctx_event,
 	&trace_wake_event,
-	&trace_special_event,
 	&trace_stack_event,
 	&trace_user_stack_event,
 	&trace_bprint_event,
diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index 0e73bc2ef8c..4086eae6e81 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -46,7 +46,6 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 	struct trace_array_cpu *data;
 	unsigned long flags;
 	long disabled;
-	int resched;
 	int cpu;
 	int pc;
 
@@ -54,7 +53,7 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
 		return;
 
 	pc = preempt_count();
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 
 	cpu = raw_smp_processor_id();
 	if (cpu != wakeup_current_cpu)
@@ -74,7 +73,7 @@ wakeup_tracer_call(unsigned long ip, unsigned long parent_ip)
  out:
 	atomic_dec(&data->disabled);
  out_enable:
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 }
 
 static struct ftrace_ops trace_ops __read_mostly =
@@ -383,6 +382,7 @@ static struct tracer wakeup_tracer __read_mostly =
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_wakeup,
 #endif
+	.use_max_tr	= 1,
 };
 
 static struct tracer wakeup_rt_tracer __read_mostly =
@@ -397,6 +397,7 @@ static struct tracer wakeup_rt_tracer __read_mostly =
 #ifdef CONFIG_FTRACE_SELFTEST
 	.selftest    = trace_selftest_startup_wakeup,
 #endif
+	.use_max_tr	= 1,
 };
 
 __init static int init_wakeup_tracer(void)
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 250e7f9bd2f..155a415b320 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -13,11 +13,9 @@ static inline int trace_valid_entry(struct trace_entry *entry)
 	case TRACE_WAKE:
 	case TRACE_STACK:
 	case TRACE_PRINT:
-	case TRACE_SPECIAL:
 	case TRACE_BRANCH:
 	case TRACE_GRAPH_ENT:
 	case TRACE_GRAPH_RET:
-	case TRACE_KSYM:
 		return 1;
 	}
 	return 0;
@@ -691,38 +689,6 @@ trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr
 }
 #endif /* CONFIG_CONTEXT_SWITCH_TRACER */
 
-#ifdef CONFIG_SYSPROF_TRACER
-int
-trace_selftest_startup_sysprof(struct tracer *trace, struct trace_array *tr)
-{
-	unsigned long count;
-	int ret;
-
-	/* start the tracing */
-	ret = tracer_init(trace, tr);
-	if (ret) {
-		warn_failed_init_tracer(trace, ret);
-		return ret;
-	}
-
-	/* Sleep for a 1/10 of a second */
-	msleep(100);
-	/* stop the tracing. */
-	tracing_stop();
-	/* check the trace buffer */
-	ret = trace_test_buffer(tr, &count);
-	trace->reset(tr);
-	tracing_start();
-
-	if (!ret && !count) {
-		printk(KERN_CONT ".. no entries found ..");
-		ret = -1;
-	}
-
-	return ret;
-}
-#endif /* CONFIG_SYSPROF_TRACER */
-
 #ifdef CONFIG_BRANCH_TRACER
 int
 trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr)
@@ -755,56 +721,3 @@ trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr)
 }
 #endif /* CONFIG_BRANCH_TRACER */
 
-#ifdef CONFIG_KSYM_TRACER
-static int ksym_selftest_dummy;
-
-int
-trace_selftest_startup_ksym(struct tracer *trace, struct trace_array *tr)
-{
-	unsigned long count;
-	int ret;
-
-	/* start the tracing */
-	ret = tracer_init(trace, tr);
-	if (ret) {
-		warn_failed_init_tracer(trace, ret);
-		return ret;
-	}
-
-	ksym_selftest_dummy = 0;
-	/* Register the read-write tracing request */
-
-	ret = process_new_ksym_entry("ksym_selftest_dummy",
-				     HW_BREAKPOINT_R | HW_BREAKPOINT_W,
-					(unsigned long)(&ksym_selftest_dummy));
-
-	if (ret < 0) {
-		printk(KERN_CONT "ksym_trace read-write startup test failed\n");
-		goto ret_path;
-	}
-	/* Perform a read and a write operation over the dummy variable to
-	 * trigger the tracer
-	 */
-	if (ksym_selftest_dummy == 0)
-		ksym_selftest_dummy++;
-
-	/* stop the tracing. */
-	tracing_stop();
-	/* check the trace buffer */
-	ret = trace_test_buffer(tr, &count);
-	trace->reset(tr);
-	tracing_start();
-
-	/* read & write operations - one each is performed on the dummy variable
-	 * triggering two entries in the trace buffer
-	 */
-	if (!ret && count != 2) {
-		printk(KERN_CONT "Ksym tracer startup test failed");
-		ret = -1;
-	}
-
-ret_path:
-	return ret;
-}
-#endif /* CONFIG_KSYM_TRACER */
-
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index f4bc9b27de5..056468eae7c 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -110,12 +110,12 @@ static inline void check_stack(void)
 static void
 stack_trace_call(unsigned long ip, unsigned long parent_ip)
 {
-	int cpu, resched;
+	int cpu;
 
 	if (unlikely(!ftrace_enabled || stack_trace_disabled))
 		return;
 
-	resched = ftrace_preempt_disable();
+	preempt_disable_notrace();
 
 	cpu = raw_smp_processor_id();
 	/* no atomic needed, we only modify this variable by this cpu */
@@ -127,7 +127,7 @@ stack_trace_call(unsigned long ip, unsigned long parent_ip)
  out:
 	per_cpu(trace_active, cpu)--;
 	/* prevent recursion in schedule */
-	ftrace_preempt_enable(resched);
+	preempt_enable_notrace();
 }
 
 static struct ftrace_ops trace_ops __read_mostly =
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 34e35804304..bac752f0cfb 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -23,6 +23,9 @@ static int syscall_exit_register(struct ftrace_event_call *event,
 static int syscall_enter_define_fields(struct ftrace_event_call *call);
 static int syscall_exit_define_fields(struct ftrace_event_call *call);
 
+/* All syscall exit events have the same fields */
+static LIST_HEAD(syscall_exit_fields);
+
 static struct list_head *
 syscall_get_enter_fields(struct ftrace_event_call *call)
 {
@@ -34,9 +37,7 @@ syscall_get_enter_fields(struct ftrace_event_call *call)
 static struct list_head *
 syscall_get_exit_fields(struct ftrace_event_call *call)
 {
-	struct syscall_metadata *entry = call->data;
-
-	return &entry->exit_fields;
+	return &syscall_exit_fields;
 }
 
 struct trace_event_functions enter_syscall_print_funcs = {
diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c
deleted file mode 100644
index a7974a552ca..00000000000
--- a/kernel/trace/trace_sysprof.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * trace stack traces
- *
- * Copyright (C) 2004-2008, Soeren Sandmann
- * Copyright (C) 2007 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2008 Ingo Molnar <mingo@redhat.com>
- */
-#include <linux/kallsyms.h>
-#include <linux/debugfs.h>
-#include <linux/hrtimer.h>
-#include <linux/uaccess.h>
-#include <linux/ftrace.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-
-#include <asm/stacktrace.h>
-
-#include "trace.h"
-
-static struct trace_array	*sysprof_trace;
-static int __read_mostly	tracer_enabled;
-
-/*
- * 1 msec sample interval by default:
- */
-static unsigned long sample_period = 1000000;
-static const unsigned int sample_max_depth = 512;
-
-static DEFINE_MUTEX(sample_timer_lock);
-/*
- * Per CPU hrtimers that do the profiling:
- */
-static DEFINE_PER_CPU(struct hrtimer, stack_trace_hrtimer);
-
-struct stack_frame {
-	const void __user	*next_fp;
-	unsigned long		return_address;
-};
-
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
-{
-	int ret;
-
-	if (!access_ok(VERIFY_READ, fp, sizeof(*frame)))
-		return 0;
-
-	ret = 1;
-	pagefault_disable();
-	if (__copy_from_user_inatomic(frame, fp, sizeof(*frame)))
-		ret = 0;
-	pagefault_enable();
-
-	return ret;
-}
-
-struct backtrace_info {
-	struct trace_array_cpu	*data;
-	struct trace_array	*tr;
-	int			pos;
-};
-
-static void
-backtrace_warning_symbol(void *data, char *msg, unsigned long symbol)
-{
-	/* Ignore warnings */
-}
-
-static void backtrace_warning(void *data, char *msg)
-{
-	/* Ignore warnings */
-}
-
-static int backtrace_stack(void *data, char *name)
-{
-	/* Don't bother with IRQ stacks for now */
-	return -1;
-}
-
-static void backtrace_address(void *data, unsigned long addr, int reliable)
-{
-	struct backtrace_info *info = data;
-
-	if (info->pos < sample_max_depth && reliable) {
-		__trace_special(info->tr, info->data, 1, addr, 0);
-
-		info->pos++;
-	}
-}
-
-static const struct stacktrace_ops backtrace_ops = {
-	.warning		= backtrace_warning,
-	.warning_symbol		= backtrace_warning_symbol,
-	.stack			= backtrace_stack,
-	.address		= backtrace_address,
-	.walk_stack		= print_context_stack,
-};
-
-static int
-trace_kernel(struct pt_regs *regs, struct trace_array *tr,
-	     struct trace_array_cpu *data)
-{
-	struct backtrace_info info;
-	unsigned long bp;
-	char *stack;
-
-	info.tr = tr;
-	info.data = data;
-	info.pos = 1;
-
-	__trace_special(info.tr, info.data, 1, regs->ip, 0);
-
-	stack = ((char *)regs + sizeof(struct pt_regs));
-#ifdef CONFIG_FRAME_POINTER
-	bp = regs->bp;
-#else
-	bp = 0;
-#endif
-
-	dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, &info);
-
-	return info.pos;
-}
-
-static void timer_notify(struct pt_regs *regs, int cpu)
-{
-	struct trace_array_cpu *data;
-	struct stack_frame frame;
-	struct trace_array *tr;
-	const void __user *fp;
-	int is_user;
-	int i;
-
-	if (!regs)
-		return;
-
-	tr = sysprof_trace;
-	data = tr->data[cpu];
-	is_user = user_mode(regs);
-
-	if (!current || current->pid == 0)
-		return;
-
-	if (is_user && current->state != TASK_RUNNING)
-		return;
-
-	__trace_special(tr, data, 0, 0, current->pid);
-
-	if (!is_user)
-		i = trace_kernel(regs, tr, data);
-	else
-		i = 0;
-
-	/*
-	 * Trace user stack if we are not a kernel thread
-	 */
-	if (current->mm && i < sample_max_depth) {
-		regs = (struct pt_regs *)current->thread.sp0 - 1;
-
-		fp = (void __user *)regs->bp;
-
-		__trace_special(tr, data, 2, regs->ip, 0);
-
-		while (i < sample_max_depth) {
-			frame.next_fp = NULL;
-			frame.return_address = 0;
-			if (!copy_stack_frame(fp, &frame))
-				break;
-			if ((unsigned long)fp < regs->sp)
-				break;
-
-			__trace_special(tr, data, 2, frame.return_address,
-					(unsigned long)fp);
-			fp = frame.next_fp;
-
-			i++;
-		}
-
-	}
-
-	/*
-	 * Special trace entry if we overflow the max depth:
-	 */
-	if (i == sample_max_depth)
-		__trace_special(tr, data, -1, -1, -1);
-
-	__trace_special(tr, data, 3, current->pid, i);
-}
-
-static enum hrtimer_restart stack_trace_timer_fn(struct hrtimer *hrtimer)
-{
-	/* trace here */
-	timer_notify(get_irq_regs(), smp_processor_id());
-
-	hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period));
-
-	return HRTIMER_RESTART;
-}
-
-static void start_stack_timer(void *unused)
-{
-	struct hrtimer *hrtimer = &__get_cpu_var(stack_trace_hrtimer);
-
-	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
-	hrtimer->function = stack_trace_timer_fn;
-
-	hrtimer_start(hrtimer, ns_to_ktime(sample_period),
-		      HRTIMER_MODE_REL_PINNED);
-}
-
-static void start_stack_timers(void)
-{
-	on_each_cpu(start_stack_timer, NULL, 1);
-}
-
-static void stop_stack_timer(int cpu)
-{
-	struct hrtimer *hrtimer = &per_cpu(stack_trace_hrtimer, cpu);
-
-	hrtimer_cancel(hrtimer);
-}
-
-static void stop_stack_timers(void)
-{
-	int cpu;
-
-	for_each_online_cpu(cpu)
-		stop_stack_timer(cpu);
-}
-
-static void stop_stack_trace(struct trace_array *tr)
-{
-	mutex_lock(&sample_timer_lock);
-	stop_stack_timers();
-	tracer_enabled = 0;
-	mutex_unlock(&sample_timer_lock);
-}
-
-static int stack_trace_init(struct trace_array *tr)
-{
-	sysprof_trace = tr;
-
-	tracing_start_cmdline_record();
-
-	mutex_lock(&sample_timer_lock);
-	start_stack_timers();
-	tracer_enabled = 1;
-	mutex_unlock(&sample_timer_lock);
-	return 0;
-}
-
-static void stack_trace_reset(struct trace_array *tr)
-{
-	tracing_stop_cmdline_record();
-	stop_stack_trace(tr);
-}
-
-static struct tracer stack_trace __read_mostly =
-{
-	.name		= "sysprof",
-	.init		= stack_trace_init,
-	.reset		= stack_trace_reset,
-#ifdef CONFIG_FTRACE_SELFTEST
-	.selftest    = trace_selftest_startup_sysprof,
-#endif
-};
-
-__init static int init_stack_trace(void)
-{
-	return register_tracer(&stack_trace);
-}
-device_initcall(init_stack_trace);
-
-#define MAX_LONG_DIGITS 22
-
-static ssize_t
-sysprof_sample_read(struct file *filp, char __user *ubuf,
-		    size_t cnt, loff_t *ppos)
-{
-	char buf[MAX_LONG_DIGITS];
-	int r;
-
-	r = sprintf(buf, "%ld\n", nsecs_to_usecs(sample_period));
-
-	return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
-}
-
-static ssize_t
-sysprof_sample_write(struct file *filp, const char __user *ubuf,
-		     size_t cnt, loff_t *ppos)
-{
-	char buf[MAX_LONG_DIGITS];
-	unsigned long val;
-
-	if (cnt > MAX_LONG_DIGITS-1)
-		cnt = MAX_LONG_DIGITS-1;
-
-	if (copy_from_user(&buf, ubuf, cnt))
-		return -EFAULT;
-
-	buf[cnt] = 0;
-
-	val = simple_strtoul(buf, NULL, 10);
-	/*
-	 * Enforce a minimum sample period of 100 usecs:
-	 */
-	if (val < 100)
-		val = 100;
-
-	mutex_lock(&sample_timer_lock);
-	stop_stack_timers();
-	sample_period = val * 1000;
-	start_stack_timers();
-	mutex_unlock(&sample_timer_lock);
-
-	return cnt;
-}
-
-static const struct file_operations sysprof_sample_fops = {
-	.read		= sysprof_sample_read,
-	.write		= sysprof_sample_write,
-};
-
-void init_tracer_sysprof_debugfs(struct dentry *d_tracer)
-{
-
-	trace_create_file("sysprof_sample_period", 0644,
-			d_tracer, NULL, &sysprof_sample_fops);
-}
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
new file mode 100644
index 00000000000..613bc1f0461
--- /dev/null
+++ b/kernel/watchdog.c
@@ -0,0 +1,567 @@
+/*
+ * Detect hard and soft lockups on a system
+ *
+ * started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
+ *
+ * this code detects hard lockups: incidents in where on a CPU
+ * the kernel does not respond to anything except NMI.
+ *
+ * Note: Most of this code is borrowed heavily from softlockup.c,
+ * so thanks to Ingo for the initial implementation.
+ * Some chunks also taken from arch/x86/kernel/apic/nmi.c, thanks
+ * to those contributors as well.
+ */
+
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/nmi.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/kthread.h>
+#include <linux/lockdep.h>
+#include <linux/notifier.h>
+#include <linux/module.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq_regs.h>
+#include <linux/perf_event.h>
+
+int watchdog_enabled;
+int __read_mostly softlockup_thresh = 60;
+
+static DEFINE_PER_CPU(unsigned long, watchdog_touch_ts);
+static DEFINE_PER_CPU(struct task_struct *, softlockup_watchdog);
+static DEFINE_PER_CPU(struct hrtimer, watchdog_hrtimer);
+static DEFINE_PER_CPU(bool, softlockup_touch_sync);
+static DEFINE_PER_CPU(bool, soft_watchdog_warn);
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+static DEFINE_PER_CPU(bool, hard_watchdog_warn);
+static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
+static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts);
+static DEFINE_PER_CPU(unsigned long, hrtimer_interrupts_saved);
+static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
+#endif
+
+static int __read_mostly did_panic;
+static int __initdata no_watchdog;
+
+
+/* boot commands */
+/*
+ * Should we panic when a soft-lockup or hard-lockup occurs:
+ */
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+static int hardlockup_panic;
+
+static int __init hardlockup_panic_setup(char *str)
+{
+	if (!strncmp(str, "panic", 5))
+		hardlockup_panic = 1;
+	return 1;
+}
+__setup("nmi_watchdog=", hardlockup_panic_setup);
+#endif
+
+unsigned int __read_mostly softlockup_panic =
+			CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE;
+
+static int __init softlockup_panic_setup(char *str)
+{
+	softlockup_panic = simple_strtoul(str, NULL, 0);
+
+	return 1;
+}
+__setup("softlockup_panic=", softlockup_panic_setup);
+
+static int __init nowatchdog_setup(char *str)
+{
+	no_watchdog = 1;
+	return 1;
+}
+__setup("nowatchdog", nowatchdog_setup);
+
+/* deprecated */
+static int __init nosoftlockup_setup(char *str)
+{
+	no_watchdog = 1;
+	return 1;
+}
+__setup("nosoftlockup", nosoftlockup_setup);
+/*  */
+
+
+/*
+ * Returns seconds, approximately.  We don't need nanosecond
+ * resolution, and we don't need to waste time with a big divide when
+ * 2^30ns == 1.074s.
+ */
+static unsigned long get_timestamp(int this_cpu)
+{
+	return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
+}
+
+static unsigned long get_sample_period(void)
+{
+	/*
+	 * convert softlockup_thresh from seconds to ns
+	 * the divide by 5 is to give hrtimer 5 chances to
+	 * increment before the hardlockup detector generates
+	 * a warning
+	 */
+	return softlockup_thresh / 5 * NSEC_PER_SEC;
+}
+
+/* Commands for resetting the watchdog */
+static void __touch_watchdog(void)
+{
+	int this_cpu = smp_processor_id();
+
+	__get_cpu_var(watchdog_touch_ts) = get_timestamp(this_cpu);
+}
+
+void touch_softlockup_watchdog(void)
+{
+	__get_cpu_var(watchdog_touch_ts) = 0;
+}
+EXPORT_SYMBOL(touch_softlockup_watchdog);
+
+void touch_all_softlockup_watchdogs(void)
+{
+	int cpu;
+
+	/*
+	 * this is done lockless
+	 * do we care if a 0 races with a timestamp?
+	 * all it means is the softlock check starts one cycle later
+	 */
+	for_each_online_cpu(cpu)
+		per_cpu(watchdog_touch_ts, cpu) = 0;
+}
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+void touch_nmi_watchdog(void)
+{
+	__get_cpu_var(watchdog_nmi_touch) = true;
+	touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+#endif
+
+void touch_softlockup_watchdog_sync(void)
+{
+	__raw_get_cpu_var(softlockup_touch_sync) = true;
+	__raw_get_cpu_var(watchdog_touch_ts) = 0;
+}
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+/* watchdog detector functions */
+static int is_hardlockup(void)
+{
+	unsigned long hrint = __get_cpu_var(hrtimer_interrupts);
+
+	if (__get_cpu_var(hrtimer_interrupts_saved) == hrint)
+		return 1;
+
+	__get_cpu_var(hrtimer_interrupts_saved) = hrint;
+	return 0;
+}
+#endif
+
+static int is_softlockup(unsigned long touch_ts)
+{
+	unsigned long now = get_timestamp(smp_processor_id());
+
+	/* Warn about unreasonable delays: */
+	if (time_after(now, touch_ts + softlockup_thresh))
+		return now - touch_ts;
+
+	return 0;
+}
+
+static int
+watchdog_panic(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	did_panic = 1;
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call = watchdog_panic,
+};
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+static struct perf_event_attr wd_hw_attr = {
+	.type		= PERF_TYPE_HARDWARE,
+	.config		= PERF_COUNT_HW_CPU_CYCLES,
+	.size		= sizeof(struct perf_event_attr),
+	.pinned		= 1,
+	.disabled	= 1,
+};
+
+/* Callback function for perf event subsystem */
+void watchdog_overflow_callback(struct perf_event *event, int nmi,
+		 struct perf_sample_data *data,
+		 struct pt_regs *regs)
+{
+	if (__get_cpu_var(watchdog_nmi_touch) == true) {
+		__get_cpu_var(watchdog_nmi_touch) = false;
+		return;
+	}
+
+	/* check for a hardlockup
+	 * This is done by making sure our timer interrupt
+	 * is incrementing.  The timer interrupt should have
+	 * fired multiple times before we overflow'd.  If it hasn't
+	 * then this is a good indication the cpu is stuck
+	 */
+	if (is_hardlockup()) {
+		int this_cpu = smp_processor_id();
+
+		/* only print hardlockups once */
+		if (__get_cpu_var(hard_watchdog_warn) == true)
+			return;
+
+		if (hardlockup_panic)
+			panic("Watchdog detected hard LOCKUP on cpu %d", this_cpu);
+		else
+			WARN(1, "Watchdog detected hard LOCKUP on cpu %d", this_cpu);
+
+		__get_cpu_var(hard_watchdog_warn) = true;
+		return;
+	}
+
+	__get_cpu_var(hard_watchdog_warn) = false;
+	return;
+}
+static void watchdog_interrupt_count(void)
+{
+	__get_cpu_var(hrtimer_interrupts)++;
+}
+#else
+static inline void watchdog_interrupt_count(void) { return; }
+#endif /* CONFIG_HARDLOCKUP_DETECTOR */
+
+/* watchdog kicker functions */
+static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
+{
+	unsigned long touch_ts = __get_cpu_var(watchdog_touch_ts);
+	struct pt_regs *regs = get_irq_regs();
+	int duration;
+
+	/* kick the hardlockup detector */
+	watchdog_interrupt_count();
+
+	/* kick the softlockup detector */
+	wake_up_process(__get_cpu_var(softlockup_watchdog));
+
+	/* .. and repeat */
+	hrtimer_forward_now(hrtimer, ns_to_ktime(get_sample_period()));
+
+	if (touch_ts == 0) {
+		if (unlikely(__get_cpu_var(softlockup_touch_sync))) {
+			/*
+			 * If the time stamp was touched atomically
+			 * make sure the scheduler tick is up to date.
+			 */
+			__get_cpu_var(softlockup_touch_sync) = false;
+			sched_clock_tick();
+		}
+		__touch_watchdog();
+		return HRTIMER_RESTART;
+	}
+
+	/* check for a softlockup
+	 * This is done by making sure a high priority task is
+	 * being scheduled.  The task touches the watchdog to
+	 * indicate it is getting cpu time.  If it hasn't then
+	 * this is a good indication some task is hogging the cpu
+	 */
+	duration = is_softlockup(touch_ts);
+	if (unlikely(duration)) {
+		/* only warn once */
+		if (__get_cpu_var(soft_watchdog_warn) == true)
+			return HRTIMER_RESTART;
+
+		printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
+			smp_processor_id(), duration,
+			current->comm, task_pid_nr(current));
+		print_modules();
+		print_irqtrace_events(current);
+		if (regs)
+			show_regs(regs);
+		else
+			dump_stack();
+
+		if (softlockup_panic)
+			panic("softlockup: hung tasks");
+		__get_cpu_var(soft_watchdog_warn) = true;
+	} else
+		__get_cpu_var(soft_watchdog_warn) = false;
+
+	return HRTIMER_RESTART;
+}
+
+
+/*
+ * The watchdog thread - touches the timestamp.
+ */
+static int watchdog(void *unused)
+{
+	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
+
+	sched_setscheduler(current, SCHED_FIFO, &param);
+
+	/* initialize timestamp */
+	__touch_watchdog();
+
+	/* kick off the timer for the hardlockup detector */
+	/* done here because hrtimer_start can only pin to smp_processor_id() */
+	hrtimer_start(hrtimer, ns_to_ktime(get_sample_period()),
+		      HRTIMER_MODE_REL_PINNED);
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	/*
+	 * Run briefly once per second to reset the softlockup timestamp.
+	 * If this gets delayed for more than 60 seconds then the
+	 * debug-printout triggers in watchdog_timer_fn().
+	 */
+	while (!kthread_should_stop()) {
+		__touch_watchdog();
+		schedule();
+
+		if (kthread_should_stop())
+			break;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+	}
+	__set_current_state(TASK_RUNNING);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
+static int watchdog_nmi_enable(int cpu)
+{
+	struct perf_event_attr *wd_attr;
+	struct perf_event *event = per_cpu(watchdog_ev, cpu);
+
+	/* is it already setup and enabled? */
+	if (event && event->state > PERF_EVENT_STATE_OFF)
+		goto out;
+
+	/* it is setup but not enabled */
+	if (event != NULL)
+		goto out_enable;
+
+	/* Try to register using hardware perf events */
+	wd_attr = &wd_hw_attr;
+	wd_attr->sample_period = hw_nmi_get_sample_period();
+	event = perf_event_create_kernel_counter(wd_attr, cpu, -1, watchdog_overflow_callback);
+	if (!IS_ERR(event)) {
+		printk(KERN_INFO "NMI watchdog enabled, takes one hw-pmu counter.\n");
+		goto out_save;
+	}
+
+	printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event);
+	return -1;
+
+	/* success path */
+out_save:
+	per_cpu(watchdog_ev, cpu) = event;
+out_enable:
+	perf_event_enable(per_cpu(watchdog_ev, cpu));
+out:
+	return 0;
+}
+
+static void watchdog_nmi_disable(int cpu)
+{
+	struct perf_event *event = per_cpu(watchdog_ev, cpu);
+
+	if (event) {
+		perf_event_disable(event);
+		per_cpu(watchdog_ev, cpu) = NULL;
+
+		/* should be in cleanup, but blocks oprofile */
+		perf_event_release_kernel(event);
+	}
+	return;
+}
+#else
+static int watchdog_nmi_enable(int cpu) { return 0; }
+static void watchdog_nmi_disable(int cpu) { return; }
+#endif /* CONFIG_HARDLOCKUP_DETECTOR */
+
+/* prepare/enable/disable routines */
+static int watchdog_prepare_cpu(int cpu)
+{
+	struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, cpu);
+
+	WARN_ON(per_cpu(softlockup_watchdog, cpu));
+	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	hrtimer->function = watchdog_timer_fn;
+
+	return 0;
+}
+
+static int watchdog_enable(int cpu)
+{
+	struct task_struct *p = per_cpu(softlockup_watchdog, cpu);
+
+	/* enable the perf event */
+	if (watchdog_nmi_enable(cpu) != 0)
+		return -1;
+
+	/* create the watchdog thread */
+	if (!p) {
+		p = kthread_create(watchdog, (void *)(unsigned long)cpu, "watchdog/%d", cpu);
+		if (IS_ERR(p)) {
+			printk(KERN_ERR "softlockup watchdog for %i failed\n", cpu);
+			return -1;
+		}
+		kthread_bind(p, cpu);
+		per_cpu(watchdog_touch_ts, cpu) = 0;
+		per_cpu(softlockup_watchdog, cpu) = p;
+		wake_up_process(p);
+	}
+
+	return 0;
+}
+
+static void watchdog_disable(int cpu)
+{
+	struct task_struct *p = per_cpu(softlockup_watchdog, cpu);
+	struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, cpu);
+
+	/*
+	 * cancel the timer first to stop incrementing the stats
+	 * and waking up the kthread
+	 */
+	hrtimer_cancel(hrtimer);
+
+	/* disable the perf event */
+	watchdog_nmi_disable(cpu);
+
+	/* stop the watchdog thread */
+	if (p) {
+		per_cpu(softlockup_watchdog, cpu) = NULL;
+		kthread_stop(p);
+	}
+
+	/* if any cpu succeeds, watchdog is considered enabled for the system */
+	watchdog_enabled = 1;
+}
+
+static void watchdog_enable_all_cpus(void)
+{
+	int cpu;
+	int result = 0;
+
+	for_each_online_cpu(cpu)
+		result += watchdog_enable(cpu);
+
+	if (result)
+		printk(KERN_ERR "watchdog: failed to be enabled on some cpus\n");
+
+}
+
+static void watchdog_disable_all_cpus(void)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		watchdog_disable(cpu);
+
+	/* if all watchdogs are disabled, then they are disabled for the system */
+	watchdog_enabled = 0;
+}
+
+
+/* sysctl functions */
+#ifdef CONFIG_SYSCTL
+/*
+ * proc handler for /proc/sys/kernel/nmi_watchdog
+ */
+
+int proc_dowatchdog_enabled(struct ctl_table *table, int write,
+		     void __user *buffer, size_t *length, loff_t *ppos)
+{
+	proc_dointvec(table, write, buffer, length, ppos);
+
+	if (watchdog_enabled)
+		watchdog_enable_all_cpus();
+	else
+		watchdog_disable_all_cpus();
+	return 0;
+}
+
+int proc_dowatchdog_thresh(struct ctl_table *table, int write,
+			     void __user *buffer,
+			     size_t *lenp, loff_t *ppos)
+{
+	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+}
+#endif /* CONFIG_SYSCTL */
+
+
+/*
+ * Create/destroy watchdog threads as CPUs come and go:
+ */
+static int __cpuinit
+cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	int hotcpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+		if (watchdog_prepare_cpu(hotcpu))
+			return NOTIFY_BAD;
+		break;
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		if (watchdog_enable(hotcpu))
+			return NOTIFY_BAD;
+		break;
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
+		watchdog_disable(hotcpu);
+		break;
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+		watchdog_disable(hotcpu);
+		break;
+#endif /* CONFIG_HOTPLUG_CPU */
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata cpu_nfb = {
+	.notifier_call = cpu_callback
+};
+
+static int __init spawn_watchdog_task(void)
+{
+	void *cpu = (void *)(long)smp_processor_id();
+	int err;
+
+	if (no_watchdog)
+		return 0;
+
+	err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
+	WARN_ON(err == NOTIFY_BAD);
+
+	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
+	register_cpu_notifier(&cpu_nfb);
+
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+early_initcall(spawn_watchdog_task);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 327d2deb445..2994a0e3a61 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -33,41 +33,287 @@
 #include <linux/kallsyms.h>
 #include <linux/debug_locks.h>
 #include <linux/lockdep.h>
-#define CREATE_TRACE_POINTS
-#include <trace/events/workqueue.h>
+#include <linux/idr.h>
+
+#include "workqueue_sched.h"
+
+enum {
+	/* global_cwq flags */
+	GCWQ_MANAGE_WORKERS	= 1 << 0,	/* need to manage workers */
+	GCWQ_MANAGING_WORKERS	= 1 << 1,	/* managing workers */
+	GCWQ_DISASSOCIATED	= 1 << 2,	/* cpu can't serve workers */
+	GCWQ_FREEZING		= 1 << 3,	/* freeze in progress */
+	GCWQ_HIGHPRI_PENDING	= 1 << 4,	/* highpri works on queue */
+
+	/* worker flags */
+	WORKER_STARTED		= 1 << 0,	/* started */
+	WORKER_DIE		= 1 << 1,	/* die die die */
+	WORKER_IDLE		= 1 << 2,	/* is idle */
+	WORKER_PREP		= 1 << 3,	/* preparing to run works */
+	WORKER_ROGUE		= 1 << 4,	/* not bound to any cpu */
+	WORKER_REBIND		= 1 << 5,	/* mom is home, come back */
+	WORKER_CPU_INTENSIVE	= 1 << 6,	/* cpu intensive */
+	WORKER_UNBOUND		= 1 << 7,	/* worker is unbound */
+
+	WORKER_NOT_RUNNING	= WORKER_PREP | WORKER_ROGUE | WORKER_REBIND |
+				  WORKER_CPU_INTENSIVE | WORKER_UNBOUND,
+
+	/* gcwq->trustee_state */
+	TRUSTEE_START		= 0,		/* start */
+	TRUSTEE_IN_CHARGE	= 1,		/* trustee in charge of gcwq */
+	TRUSTEE_BUTCHER		= 2,		/* butcher workers */
+	TRUSTEE_RELEASE		= 3,		/* release workers */
+	TRUSTEE_DONE		= 4,		/* trustee is done */
+
+	BUSY_WORKER_HASH_ORDER	= 6,		/* 64 pointers */
+	BUSY_WORKER_HASH_SIZE	= 1 << BUSY_WORKER_HASH_ORDER,
+	BUSY_WORKER_HASH_MASK	= BUSY_WORKER_HASH_SIZE - 1,
+
+	MAX_IDLE_WORKERS_RATIO	= 4,		/* 1/4 of busy can be idle */
+	IDLE_WORKER_TIMEOUT	= 300 * HZ,	/* keep idle ones for 5 mins */
+
+	MAYDAY_INITIAL_TIMEOUT	= HZ / 100,	/* call for help after 10ms */
+	MAYDAY_INTERVAL		= HZ / 10,	/* and then every 100ms */
+	CREATE_COOLDOWN		= HZ,		/* time to breath after fail */
+	TRUSTEE_COOLDOWN	= HZ / 10,	/* for trustee draining */
+
+	/*
+	 * Rescue workers are used only on emergencies and shared by
+	 * all cpus.  Give -20.
+	 */
+	RESCUER_NICE_LEVEL	= -20,
+};
 
 /*
- * The per-CPU workqueue (if single thread, we always use the first
- * possible cpu).
+ * Structure fields follow one of the following exclusion rules.
+ *
+ * I: Set during initialization and read-only afterwards.
+ *
+ * P: Preemption protected.  Disabling preemption is enough and should
+ *    only be modified and accessed from the local cpu.
+ *
+ * L: gcwq->lock protected.  Access with gcwq->lock held.
+ *
+ * X: During normal operation, modification requires gcwq->lock and
+ *    should be done only from local cpu.  Either disabling preemption
+ *    on local cpu or grabbing gcwq->lock is enough for read access.
+ *    If GCWQ_DISASSOCIATED is set, it's identical to L.
+ *
+ * F: wq->flush_mutex protected.
+ *
+ * W: workqueue_lock protected.
  */
-struct cpu_workqueue_struct {
 
-	spinlock_t lock;
+struct global_cwq;
 
-	struct list_head worklist;
-	wait_queue_head_t more_work;
-	struct work_struct *current_work;
+/*
+ * The poor guys doing the actual heavy lifting.  All on-duty workers
+ * are either serving the manager role, on idle list or on busy hash.
+ */
+struct worker {
+	/* on idle list while idle, on busy hash table while busy */
+	union {
+		struct list_head	entry;	/* L: while idle */
+		struct hlist_node	hentry;	/* L: while busy */
+	};
 
-	struct workqueue_struct *wq;
-	struct task_struct *thread;
-} ____cacheline_aligned;
+	struct work_struct	*current_work;	/* L: work being processed */
+	struct cpu_workqueue_struct *current_cwq; /* L: current_work's cwq */
+	struct list_head	scheduled;	/* L: scheduled works */
+	struct task_struct	*task;		/* I: worker task */
+	struct global_cwq	*gcwq;		/* I: the associated gcwq */
+	/* 64 bytes boundary on 64bit, 32 on 32bit */
+	unsigned long		last_active;	/* L: last active timestamp */
+	unsigned int		flags;		/* X: flags */
+	int			id;		/* I: worker id */
+	struct work_struct	rebind_work;	/* L: rebind worker to cpu */
+};
+
+/*
+ * Global per-cpu workqueue.  There's one and only one for each cpu
+ * and all works are queued and processed here regardless of their
+ * target workqueues.
+ */
+struct global_cwq {
+	spinlock_t		lock;		/* the gcwq lock */
+	struct list_head	worklist;	/* L: list of pending works */
+	unsigned int		cpu;		/* I: the associated cpu */
+	unsigned int		flags;		/* L: GCWQ_* flags */
+
+	int			nr_workers;	/* L: total number of workers */
+	int			nr_idle;	/* L: currently idle ones */
+
+	/* workers are chained either in the idle_list or busy_hash */
+	struct list_head	idle_list;	/* X: list of idle workers */
+	struct hlist_head	busy_hash[BUSY_WORKER_HASH_SIZE];
+						/* L: hash of busy workers */
+
+	struct timer_list	idle_timer;	/* L: worker idle timeout */
+	struct timer_list	mayday_timer;	/* L: SOS timer for dworkers */
+
+	struct ida		worker_ida;	/* L: for worker IDs */
+
+	struct task_struct	*trustee;	/* L: for gcwq shutdown */
+	unsigned int		trustee_state;	/* L: trustee state */
+	wait_queue_head_t	trustee_wait;	/* trustee wait */
+	struct worker		*first_idle;	/* L: first idle worker */
+} ____cacheline_aligned_in_smp;
+
+/*
+ * The per-CPU workqueue.  The lower WORK_STRUCT_FLAG_BITS of
+ * work_struct->data are used for flags and thus cwqs need to be
+ * aligned at two's power of the number of flag bits.
+ */
+struct cpu_workqueue_struct {
+	struct global_cwq	*gcwq;		/* I: the associated gcwq */
+	struct workqueue_struct *wq;		/* I: the owning workqueue */
+	int			work_color;	/* L: current color */
+	int			flush_color;	/* L: flushing color */
+	int			nr_in_flight[WORK_NR_COLORS];
+						/* L: nr of in_flight works */
+	int			nr_active;	/* L: nr of active works */
+	int			max_active;	/* L: max active works */
+	struct list_head	delayed_works;	/* L: delayed works */
+};
+
+/*
+ * Structure used to wait for workqueue flush.
+ */
+struct wq_flusher {
+	struct list_head	list;		/* F: list of flushers */
+	int			flush_color;	/* F: flush color waiting for */
+	struct completion	done;		/* flush completion */
+};
+
+/*
+ * All cpumasks are assumed to be always set on UP and thus can't be
+ * used to determine whether there's something to be done.
+ */
+#ifdef CONFIG_SMP
+typedef cpumask_var_t mayday_mask_t;
+#define mayday_test_and_set_cpu(cpu, mask)	\
+	cpumask_test_and_set_cpu((cpu), (mask))
+#define mayday_clear_cpu(cpu, mask)		cpumask_clear_cpu((cpu), (mask))
+#define for_each_mayday_cpu(cpu, mask)		for_each_cpu((cpu), (mask))
+#define alloc_mayday_mask(maskp, gfp)		alloc_cpumask_var((maskp), (gfp))
+#define free_mayday_mask(mask)			free_cpumask_var((mask))
+#else
+typedef unsigned long mayday_mask_t;
+#define mayday_test_and_set_cpu(cpu, mask)	test_and_set_bit(0, &(mask))
+#define mayday_clear_cpu(cpu, mask)		clear_bit(0, &(mask))
+#define for_each_mayday_cpu(cpu, mask)		if ((cpu) = 0, (mask))
+#define alloc_mayday_mask(maskp, gfp)		true
+#define free_mayday_mask(mask)			do { } while (0)
+#endif
 
 /*
  * The externally visible workqueue abstraction is an array of
  * per-CPU workqueues:
  */
 struct workqueue_struct {
-	struct cpu_workqueue_struct *cpu_wq;
-	struct list_head list;
-	const char *name;
-	int singlethread;
-	int freezeable;		/* Freeze threads during suspend */
-	int rt;
+	unsigned int		flags;		/* I: WQ_* flags */
+	union {
+		struct cpu_workqueue_struct __percpu	*pcpu;
+		struct cpu_workqueue_struct		*single;
+		unsigned long				v;
+	} cpu_wq;				/* I: cwq's */
+	struct list_head	list;		/* W: list of all workqueues */
+
+	struct mutex		flush_mutex;	/* protects wq flushing */
+	int			work_color;	/* F: current work color */
+	int			flush_color;	/* F: current flush color */
+	atomic_t		nr_cwqs_to_flush; /* flush in progress */
+	struct wq_flusher	*first_flusher;	/* F: first flusher */
+	struct list_head	flusher_queue;	/* F: flush waiters */
+	struct list_head	flusher_overflow; /* F: flush overflow list */
+
+	mayday_mask_t		mayday_mask;	/* cpus requesting rescue */
+	struct worker		*rescuer;	/* I: rescue worker */
+
+	int			saved_max_active; /* W: saved cwq max_active */
+	const char		*name;		/* I: workqueue name */
 #ifdef CONFIG_LOCKDEP
-	struct lockdep_map lockdep_map;
+	struct lockdep_map	lockdep_map;
 #endif
 };
 
+struct workqueue_struct *system_wq __read_mostly;
+struct workqueue_struct *system_long_wq __read_mostly;
+struct workqueue_struct *system_nrt_wq __read_mostly;
+struct workqueue_struct *system_unbound_wq __read_mostly;
+EXPORT_SYMBOL_GPL(system_wq);
+EXPORT_SYMBOL_GPL(system_long_wq);
+EXPORT_SYMBOL_GPL(system_nrt_wq);
+EXPORT_SYMBOL_GPL(system_unbound_wq);
+
+#define for_each_busy_worker(worker, i, pos, gcwq)			\
+	for (i = 0; i < BUSY_WORKER_HASH_SIZE; i++)			\
+		hlist_for_each_entry(worker, pos, &gcwq->busy_hash[i], hentry)
+
+static inline int __next_gcwq_cpu(int cpu, const struct cpumask *mask,
+				  unsigned int sw)
+{
+	if (cpu < nr_cpu_ids) {
+		if (sw & 1) {
+			cpu = cpumask_next(cpu, mask);
+			if (cpu < nr_cpu_ids)
+				return cpu;
+		}
+		if (sw & 2)
+			return WORK_CPU_UNBOUND;
+	}
+	return WORK_CPU_NONE;
+}
+
+static inline int __next_wq_cpu(int cpu, const struct cpumask *mask,
+				struct workqueue_struct *wq)
+{
+	return __next_gcwq_cpu(cpu, mask, !(wq->flags & WQ_UNBOUND) ? 1 : 2);
+}
+
+/*
+ * CPU iterators
+ *
+ * An extra gcwq is defined for an invalid cpu number
+ * (WORK_CPU_UNBOUND) to host workqueues which are not bound to any
+ * specific CPU.  The following iterators are similar to
+ * for_each_*_cpu() iterators but also considers the unbound gcwq.
+ *
+ * for_each_gcwq_cpu()		: possible CPUs + WORK_CPU_UNBOUND
+ * for_each_online_gcwq_cpu()	: online CPUs + WORK_CPU_UNBOUND
+ * for_each_cwq_cpu()		: possible CPUs for bound workqueues,
+ *				  WORK_CPU_UNBOUND for unbound workqueues
+ */
+#define for_each_gcwq_cpu(cpu)						\
+	for ((cpu) = __next_gcwq_cpu(-1, cpu_possible_mask, 3);		\
+	     (cpu) < WORK_CPU_NONE;					\
+	     (cpu) = __next_gcwq_cpu((cpu), cpu_possible_mask, 3))
+
+#define for_each_online_gcwq_cpu(cpu)					\
+	for ((cpu) = __next_gcwq_cpu(-1, cpu_online_mask, 3);		\
+	     (cpu) < WORK_CPU_NONE;					\
+	     (cpu) = __next_gcwq_cpu((cpu), cpu_online_mask, 3))
+
+#define for_each_cwq_cpu(cpu, wq)					\
+	for ((cpu) = __next_wq_cpu(-1, cpu_possible_mask, (wq));	\
+	     (cpu) < WORK_CPU_NONE;					\
+	     (cpu) = __next_wq_cpu((cpu), cpu_possible_mask, (wq)))
+
+#ifdef CONFIG_LOCKDEP
+/**
+ * in_workqueue_context() - in context of specified workqueue?
+ * @wq: the workqueue of interest
+ *
+ * Checks lockdep state to see if the current task is executing from
+ * within a workqueue item.  This function exists only if lockdep is
+ * enabled.
+ */
+int in_workqueue_context(struct workqueue_struct *wq)
+{
+	return lock_is_held(&wq->lockdep_map);
+}
+#endif
+
 #ifdef CONFIG_DEBUG_OBJECTS_WORK
 
 static struct debug_obj_descr work_debug_descr;
@@ -107,7 +353,7 @@ static int work_fixup_activate(void *addr, enum debug_obj_state state)
 		 * statically initialized. We just make sure that it
 		 * is tracked in the object tracker.
 		 */
-		if (test_bit(WORK_STRUCT_STATIC, work_data_bits(work))) {
+		if (test_bit(WORK_STRUCT_STATIC_BIT, work_data_bits(work))) {
 			debug_object_init(work, &work_debug_descr);
 			debug_object_activate(work, &work_debug_descr);
 			return 0;
@@ -181,94 +427,575 @@ static inline void debug_work_deactivate(struct work_struct *work) { }
 /* Serializes the accesses to the list of workqueues. */
 static DEFINE_SPINLOCK(workqueue_lock);
 static LIST_HEAD(workqueues);
+static bool workqueue_freezing;		/* W: have wqs started freezing? */
+
+/*
+ * The almighty global cpu workqueues.  nr_running is the only field
+ * which is expected to be used frequently by other cpus via
+ * try_to_wake_up().  Put it in a separate cacheline.
+ */
+static DEFINE_PER_CPU(struct global_cwq, global_cwq);
+static DEFINE_PER_CPU_SHARED_ALIGNED(atomic_t, gcwq_nr_running);
 
-static int singlethread_cpu __read_mostly;
-static const struct cpumask *cpu_singlethread_map __read_mostly;
 /*
- * _cpu_down() first removes CPU from cpu_online_map, then CPU_DEAD
- * flushes cwq->worklist. This means that flush_workqueue/wait_on_work
- * which comes in between can't use for_each_online_cpu(). We could
- * use cpu_possible_map, the cpumask below is more a documentation
- * than optimization.
+ * Global cpu workqueue and nr_running counter for unbound gcwq.  The
+ * gcwq is always online, has GCWQ_DISASSOCIATED set, and all its
+ * workers have WORKER_UNBOUND set.
  */
-static cpumask_var_t cpu_populated_map __read_mostly;
+static struct global_cwq unbound_global_cwq;
+static atomic_t unbound_gcwq_nr_running = ATOMIC_INIT(0);	/* always 0 */
 
-/* If it's single threaded, it isn't in the list of workqueues. */
-static inline int is_wq_single_threaded(struct workqueue_struct *wq)
+static int worker_thread(void *__worker);
+
+static struct global_cwq *get_gcwq(unsigned int cpu)
 {
-	return wq->singlethread;
+	if (cpu != WORK_CPU_UNBOUND)
+		return &per_cpu(global_cwq, cpu);
+	else
+		return &unbound_global_cwq;
 }
 
-static const struct cpumask *wq_cpu_map(struct workqueue_struct *wq)
+static atomic_t *get_gcwq_nr_running(unsigned int cpu)
 {
-	return is_wq_single_threaded(wq)
-		? cpu_singlethread_map : cpu_populated_map;
+	if (cpu != WORK_CPU_UNBOUND)
+		return &per_cpu(gcwq_nr_running, cpu);
+	else
+		return &unbound_gcwq_nr_running;
 }
 
-static
-struct cpu_workqueue_struct *wq_per_cpu(struct workqueue_struct *wq, int cpu)
+static struct cpu_workqueue_struct *get_cwq(unsigned int cpu,
+					    struct workqueue_struct *wq)
 {
-	if (unlikely(is_wq_single_threaded(wq)))
-		cpu = singlethread_cpu;
-	return per_cpu_ptr(wq->cpu_wq, cpu);
+	if (!(wq->flags & WQ_UNBOUND)) {
+		if (likely(cpu < nr_cpu_ids)) {
+#ifdef CONFIG_SMP
+			return per_cpu_ptr(wq->cpu_wq.pcpu, cpu);
+#else
+			return wq->cpu_wq.single;
+#endif
+		}
+	} else if (likely(cpu == WORK_CPU_UNBOUND))
+		return wq->cpu_wq.single;
+	return NULL;
+}
+
+static unsigned int work_color_to_flags(int color)
+{
+	return color << WORK_STRUCT_COLOR_SHIFT;
+}
+
+static int get_work_color(struct work_struct *work)
+{
+	return (*work_data_bits(work) >> WORK_STRUCT_COLOR_SHIFT) &
+		((1 << WORK_STRUCT_COLOR_BITS) - 1);
+}
+
+static int work_next_color(int color)
+{
+	return (color + 1) % WORK_NR_COLORS;
 }
 
 /*
- * Set the workqueue on which a work item is to be run
- * - Must *only* be called if the pending flag is set
+ * A work's data points to the cwq with WORK_STRUCT_CWQ set while the
+ * work is on queue.  Once execution starts, WORK_STRUCT_CWQ is
+ * cleared and the work data contains the cpu number it was last on.
+ *
+ * set_work_{cwq|cpu}() and clear_work_data() can be used to set the
+ * cwq, cpu or clear work->data.  These functions should only be
+ * called while the work is owned - ie. while the PENDING bit is set.
+ *
+ * get_work_[g]cwq() can be used to obtain the gcwq or cwq
+ * corresponding to a work.  gcwq is available once the work has been
+ * queued anywhere after initialization.  cwq is available only from
+ * queueing until execution starts.
  */
-static inline void set_wq_data(struct work_struct *work,
-				struct cpu_workqueue_struct *cwq)
+static inline void set_work_data(struct work_struct *work, unsigned long data,
+				 unsigned long flags)
 {
-	unsigned long new;
-
 	BUG_ON(!work_pending(work));
+	atomic_long_set(&work->data, data | flags | work_static(work));
+}
+
+static void set_work_cwq(struct work_struct *work,
+			 struct cpu_workqueue_struct *cwq,
+			 unsigned long extra_flags)
+{
+	set_work_data(work, (unsigned long)cwq,
+		      WORK_STRUCT_PENDING | WORK_STRUCT_CWQ | extra_flags);
+}
+
+static void set_work_cpu(struct work_struct *work, unsigned int cpu)
+{
+	set_work_data(work, cpu << WORK_STRUCT_FLAG_BITS, WORK_STRUCT_PENDING);
+}
+
+static void clear_work_data(struct work_struct *work)
+{
+	set_work_data(work, WORK_STRUCT_NO_CPU, 0);
+}
+
+static struct cpu_workqueue_struct *get_work_cwq(struct work_struct *work)
+{
+	unsigned long data = atomic_long_read(&work->data);
+
+	if (data & WORK_STRUCT_CWQ)
+		return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
+	else
+		return NULL;
+}
+
+static struct global_cwq *get_work_gcwq(struct work_struct *work)
+{
+	unsigned long data = atomic_long_read(&work->data);
+	unsigned int cpu;
+
+	if (data & WORK_STRUCT_CWQ)
+		return ((struct cpu_workqueue_struct *)
+			(data & WORK_STRUCT_WQ_DATA_MASK))->gcwq;
+
+	cpu = data >> WORK_STRUCT_FLAG_BITS;
+	if (cpu == WORK_CPU_NONE)
+		return NULL;
+
+	BUG_ON(cpu >= nr_cpu_ids && cpu != WORK_CPU_UNBOUND);
+	return get_gcwq(cpu);
+}
+
+/*
+ * Policy functions.  These define the policies on how the global
+ * worker pool is managed.  Unless noted otherwise, these functions
+ * assume that they're being called with gcwq->lock held.
+ */
+
+static bool __need_more_worker(struct global_cwq *gcwq)
+{
+	return !atomic_read(get_gcwq_nr_running(gcwq->cpu)) ||
+		gcwq->flags & GCWQ_HIGHPRI_PENDING;
+}
+
+/*
+ * Need to wake up a worker?  Called from anything but currently
+ * running workers.
+ */
+static bool need_more_worker(struct global_cwq *gcwq)
+{
+	return !list_empty(&gcwq->worklist) && __need_more_worker(gcwq);
+}
+
+/* Can I start working?  Called from busy but !running workers. */
+static bool may_start_working(struct global_cwq *gcwq)
+{
+	return gcwq->nr_idle;
+}
+
+/* Do I need to keep working?  Called from currently running workers. */
+static bool keep_working(struct global_cwq *gcwq)
+{
+	atomic_t *nr_running = get_gcwq_nr_running(gcwq->cpu);
+
+	return !list_empty(&gcwq->worklist) && atomic_read(nr_running) <= 1;
+}
+
+/* Do we need a new worker?  Called from manager. */
+static bool need_to_create_worker(struct global_cwq *gcwq)
+{
+	return need_more_worker(gcwq) && !may_start_working(gcwq);
+}
+
+/* Do I need to be the manager? */
+static bool need_to_manage_workers(struct global_cwq *gcwq)
+{
+	return need_to_create_worker(gcwq) || gcwq->flags & GCWQ_MANAGE_WORKERS;
+}
+
+/* Do we have too many workers and should some go away? */
+static bool too_many_workers(struct global_cwq *gcwq)
+{
+	bool managing = gcwq->flags & GCWQ_MANAGING_WORKERS;
+	int nr_idle = gcwq->nr_idle + managing; /* manager is considered idle */
+	int nr_busy = gcwq->nr_workers - nr_idle;
 
-	new = (unsigned long) cwq | (1UL << WORK_STRUCT_PENDING);
-	new |= WORK_STRUCT_FLAG_MASK & *work_data_bits(work);
-	atomic_long_set(&work->data, new);
+	return nr_idle > 2 && (nr_idle - 2) * MAX_IDLE_WORKERS_RATIO >= nr_busy;
 }
 
 /*
- * Clear WORK_STRUCT_PENDING and the workqueue on which it was queued.
+ * Wake up functions.
  */
-static inline void clear_wq_data(struct work_struct *work)
+
+/* Return the first worker.  Safe with preemption disabled */
+static struct worker *first_worker(struct global_cwq *gcwq)
 {
-	unsigned long flags = *work_data_bits(work) &
-				(1UL << WORK_STRUCT_STATIC);
-	atomic_long_set(&work->data, flags);
+	if (unlikely(list_empty(&gcwq->idle_list)))
+		return NULL;
+
+	return list_first_entry(&gcwq->idle_list, struct worker, entry);
 }
 
-static inline
-struct cpu_workqueue_struct *get_wq_data(struct work_struct *work)
+/**
+ * wake_up_worker - wake up an idle worker
+ * @gcwq: gcwq to wake worker for
+ *
+ * Wake up the first idle worker of @gcwq.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void wake_up_worker(struct global_cwq *gcwq)
 {
-	return (void *) (atomic_long_read(&work->data) & WORK_STRUCT_WQ_DATA_MASK);
+	struct worker *worker = first_worker(gcwq);
+
+	if (likely(worker))
+		wake_up_process(worker->task);
+}
+
+/**
+ * wq_worker_waking_up - a worker is waking up
+ * @task: task waking up
+ * @cpu: CPU @task is waking up to
+ *
+ * This function is called during try_to_wake_up() when a worker is
+ * being awoken.
+ *
+ * CONTEXT:
+ * spin_lock_irq(rq->lock)
+ */
+void wq_worker_waking_up(struct task_struct *task, unsigned int cpu)
+{
+	struct worker *worker = kthread_data(task);
+
+	if (likely(!(worker->flags & WORKER_NOT_RUNNING)))
+		atomic_inc(get_gcwq_nr_running(cpu));
+}
+
+/**
+ * wq_worker_sleeping - a worker is going to sleep
+ * @task: task going to sleep
+ * @cpu: CPU in question, must be the current CPU number
+ *
+ * This function is called during schedule() when a busy worker is
+ * going to sleep.  Worker on the same cpu can be woken up by
+ * returning pointer to its task.
+ *
+ * CONTEXT:
+ * spin_lock_irq(rq->lock)
+ *
+ * RETURNS:
+ * Worker task on @cpu to wake up, %NULL if none.
+ */
+struct task_struct *wq_worker_sleeping(struct task_struct *task,
+				       unsigned int cpu)
+{
+	struct worker *worker = kthread_data(task), *to_wakeup = NULL;
+	struct global_cwq *gcwq = get_gcwq(cpu);
+	atomic_t *nr_running = get_gcwq_nr_running(cpu);
+
+	if (unlikely(worker->flags & WORKER_NOT_RUNNING))
+		return NULL;
+
+	/* this can only happen on the local cpu */
+	BUG_ON(cpu != raw_smp_processor_id());
+
+	/*
+	 * The counterpart of the following dec_and_test, implied mb,
+	 * worklist not empty test sequence is in insert_work().
+	 * Please read comment there.
+	 *
+	 * NOT_RUNNING is clear.  This means that trustee is not in
+	 * charge and we're running on the local cpu w/ rq lock held
+	 * and preemption disabled, which in turn means that none else
+	 * could be manipulating idle_list, so dereferencing idle_list
+	 * without gcwq lock is safe.
+	 */
+	if (atomic_dec_and_test(nr_running) && !list_empty(&gcwq->worklist))
+		to_wakeup = first_worker(gcwq);
+	return to_wakeup ? to_wakeup->task : NULL;
+}
+
+/**
+ * worker_set_flags - set worker flags and adjust nr_running accordingly
+ * @worker: self
+ * @flags: flags to set
+ * @wakeup: wakeup an idle worker if necessary
+ *
+ * Set @flags in @worker->flags and adjust nr_running accordingly.  If
+ * nr_running becomes zero and @wakeup is %true, an idle worker is
+ * woken up.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock)
+ */
+static inline void worker_set_flags(struct worker *worker, unsigned int flags,
+				    bool wakeup)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+
+	WARN_ON_ONCE(worker->task != current);
+
+	/*
+	 * If transitioning into NOT_RUNNING, adjust nr_running and
+	 * wake up an idle worker as necessary if requested by
+	 * @wakeup.
+	 */
+	if ((flags & WORKER_NOT_RUNNING) &&
+	    !(worker->flags & WORKER_NOT_RUNNING)) {
+		atomic_t *nr_running = get_gcwq_nr_running(gcwq->cpu);
+
+		if (wakeup) {
+			if (atomic_dec_and_test(nr_running) &&
+			    !list_empty(&gcwq->worklist))
+				wake_up_worker(gcwq);
+		} else
+			atomic_dec(nr_running);
+	}
+
+	worker->flags |= flags;
 }
 
+/**
+ * worker_clr_flags - clear worker flags and adjust nr_running accordingly
+ * @worker: self
+ * @flags: flags to clear
+ *
+ * Clear @flags in @worker->flags and adjust nr_running accordingly.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock)
+ */
+static inline void worker_clr_flags(struct worker *worker, unsigned int flags)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+	unsigned int oflags = worker->flags;
+
+	WARN_ON_ONCE(worker->task != current);
+
+	worker->flags &= ~flags;
+
+	/* if transitioning out of NOT_RUNNING, increment nr_running */
+	if ((flags & WORKER_NOT_RUNNING) && (oflags & WORKER_NOT_RUNNING))
+		if (!(worker->flags & WORKER_NOT_RUNNING))
+			atomic_inc(get_gcwq_nr_running(gcwq->cpu));
+}
+
+/**
+ * busy_worker_head - return the busy hash head for a work
+ * @gcwq: gcwq of interest
+ * @work: work to be hashed
+ *
+ * Return hash head of @gcwq for @work.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ *
+ * RETURNS:
+ * Pointer to the hash head.
+ */
+static struct hlist_head *busy_worker_head(struct global_cwq *gcwq,
+					   struct work_struct *work)
+{
+	const int base_shift = ilog2(sizeof(struct work_struct));
+	unsigned long v = (unsigned long)work;
+
+	/* simple shift and fold hash, do we need something better? */
+	v >>= base_shift;
+	v += v >> BUSY_WORKER_HASH_ORDER;
+	v &= BUSY_WORKER_HASH_MASK;
+
+	return &gcwq->busy_hash[v];
+}
+
+/**
+ * __find_worker_executing_work - find worker which is executing a work
+ * @gcwq: gcwq of interest
+ * @bwh: hash head as returned by busy_worker_head()
+ * @work: work to find worker for
+ *
+ * Find a worker which is executing @work on @gcwq.  @bwh should be
+ * the hash head obtained by calling busy_worker_head() with the same
+ * work.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ *
+ * RETURNS:
+ * Pointer to worker which is executing @work if found, NULL
+ * otherwise.
+ */
+static struct worker *__find_worker_executing_work(struct global_cwq *gcwq,
+						   struct hlist_head *bwh,
+						   struct work_struct *work)
+{
+	struct worker *worker;
+	struct hlist_node *tmp;
+
+	hlist_for_each_entry(worker, tmp, bwh, hentry)
+		if (worker->current_work == work)
+			return worker;
+	return NULL;
+}
+
+/**
+ * find_worker_executing_work - find worker which is executing a work
+ * @gcwq: gcwq of interest
+ * @work: work to find worker for
+ *
+ * Find a worker which is executing @work on @gcwq.  This function is
+ * identical to __find_worker_executing_work() except that this
+ * function calculates @bwh itself.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ *
+ * RETURNS:
+ * Pointer to worker which is executing @work if found, NULL
+ * otherwise.
+ */
+static struct worker *find_worker_executing_work(struct global_cwq *gcwq,
+						 struct work_struct *work)
+{
+	return __find_worker_executing_work(gcwq, busy_worker_head(gcwq, work),
+					    work);
+}
+
+/**
+ * gcwq_determine_ins_pos - find insertion position
+ * @gcwq: gcwq of interest
+ * @cwq: cwq a work is being queued for
+ *
+ * A work for @cwq is about to be queued on @gcwq, determine insertion
+ * position for the work.  If @cwq is for HIGHPRI wq, the work is
+ * queued at the head of the queue but in FIFO order with respect to
+ * other HIGHPRI works; otherwise, at the end of the queue.  This
+ * function also sets GCWQ_HIGHPRI_PENDING flag to hint @gcwq that
+ * there are HIGHPRI works pending.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ *
+ * RETURNS:
+ * Pointer to inserstion position.
+ */
+static inline struct list_head *gcwq_determine_ins_pos(struct global_cwq *gcwq,
+					       struct cpu_workqueue_struct *cwq)
+{
+	struct work_struct *twork;
+
+	if (likely(!(cwq->wq->flags & WQ_HIGHPRI)))
+		return &gcwq->worklist;
+
+	list_for_each_entry(twork, &gcwq->worklist, entry) {
+		struct cpu_workqueue_struct *tcwq = get_work_cwq(twork);
+
+		if (!(tcwq->wq->flags & WQ_HIGHPRI))
+			break;
+	}
+
+	gcwq->flags |= GCWQ_HIGHPRI_PENDING;
+	return &twork->entry;
+}
+
+/**
+ * insert_work - insert a work into gcwq
+ * @cwq: cwq @work belongs to
+ * @work: work to insert
+ * @head: insertion point
+ * @extra_flags: extra WORK_STRUCT_* flags to set
+ *
+ * Insert @work which belongs to @cwq into @gcwq after @head.
+ * @extra_flags is or'd to work_struct flags.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
 static void insert_work(struct cpu_workqueue_struct *cwq,
-			struct work_struct *work, struct list_head *head)
+			struct work_struct *work, struct list_head *head,
+			unsigned int extra_flags)
 {
-	trace_workqueue_insertion(cwq->thread, work);
+	struct global_cwq *gcwq = cwq->gcwq;
+
+	/* we own @work, set data and link */
+	set_work_cwq(work, cwq, extra_flags);
 
-	set_wq_data(work, cwq);
 	/*
 	 * Ensure that we get the right work->data if we see the
 	 * result of list_add() below, see try_to_grab_pending().
 	 */
 	smp_wmb();
+
 	list_add_tail(&work->entry, head);
-	wake_up(&cwq->more_work);
+
+	/*
+	 * Ensure either worker_sched_deactivated() sees the above
+	 * list_add_tail() or we see zero nr_running to avoid workers
+	 * lying around lazily while there are works to be processed.
+	 */
+	smp_mb();
+
+	if (__need_more_worker(gcwq))
+		wake_up_worker(gcwq);
 }
 
-static void __queue_work(struct cpu_workqueue_struct *cwq,
+static void __queue_work(unsigned int cpu, struct workqueue_struct *wq,
 			 struct work_struct *work)
 {
+	struct global_cwq *gcwq;
+	struct cpu_workqueue_struct *cwq;
+	struct list_head *worklist;
 	unsigned long flags;
 
 	debug_work_activate(work);
-	spin_lock_irqsave(&cwq->lock, flags);
-	insert_work(cwq, work, &cwq->worklist);
-	spin_unlock_irqrestore(&cwq->lock, flags);
+
+	/* determine gcwq to use */
+	if (!(wq->flags & WQ_UNBOUND)) {
+		struct global_cwq *last_gcwq;
+
+		if (unlikely(cpu == WORK_CPU_UNBOUND))
+			cpu = raw_smp_processor_id();
+
+		/*
+		 * It's multi cpu.  If @wq is non-reentrant and @work
+		 * was previously on a different cpu, it might still
+		 * be running there, in which case the work needs to
+		 * be queued on that cpu to guarantee non-reentrance.
+		 */
+		gcwq = get_gcwq(cpu);
+		if (wq->flags & WQ_NON_REENTRANT &&
+		    (last_gcwq = get_work_gcwq(work)) && last_gcwq != gcwq) {
+			struct worker *worker;
+
+			spin_lock_irqsave(&last_gcwq->lock, flags);
+
+			worker = find_worker_executing_work(last_gcwq, work);
+
+			if (worker && worker->current_cwq->wq == wq)
+				gcwq = last_gcwq;
+			else {
+				/* meh... not running there, queue here */
+				spin_unlock_irqrestore(&last_gcwq->lock, flags);
+				spin_lock_irqsave(&gcwq->lock, flags);
+			}
+		} else
+			spin_lock_irqsave(&gcwq->lock, flags);
+	} else {
+		gcwq = get_gcwq(WORK_CPU_UNBOUND);
+		spin_lock_irqsave(&gcwq->lock, flags);
+	}
+
+	/* gcwq determined, get cwq and queue */
+	cwq = get_cwq(gcwq->cpu, wq);
+
+	BUG_ON(!list_empty(&work->entry));
+
+	cwq->nr_in_flight[cwq->work_color]++;
+
+	if (likely(cwq->nr_active < cwq->max_active)) {
+		cwq->nr_active++;
+		worklist = gcwq_determine_ins_pos(gcwq, cwq);
+	} else
+		worklist = &cwq->delayed_works;
+
+	insert_work(cwq, work, worklist, work_color_to_flags(cwq->work_color));
+
+	spin_unlock_irqrestore(&gcwq->lock, flags);
 }
 
 /**
@@ -308,9 +1035,8 @@ queue_work_on(int cpu, struct workqueue_struct *wq, struct work_struct *work)
 {
 	int ret = 0;
 
-	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
-		BUG_ON(!list_empty(&work->entry));
-		__queue_work(wq_per_cpu(wq, cpu), work);
+	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))) {
+		__queue_work(cpu, wq, work);
 		ret = 1;
 	}
 	return ret;
@@ -320,10 +1046,9 @@ EXPORT_SYMBOL_GPL(queue_work_on);
 static void delayed_work_timer_fn(unsigned long __data)
 {
 	struct delayed_work *dwork = (struct delayed_work *)__data;
-	struct cpu_workqueue_struct *cwq = get_wq_data(&dwork->work);
-	struct workqueue_struct *wq = cwq->wq;
+	struct cpu_workqueue_struct *cwq = get_work_cwq(&dwork->work);
 
-	__queue_work(wq_per_cpu(wq, smp_processor_id()), &dwork->work);
+	__queue_work(smp_processor_id(), cwq->wq, &dwork->work);
 }
 
 /**
@@ -360,14 +1085,31 @@ int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
 	struct timer_list *timer = &dwork->timer;
 	struct work_struct *work = &dwork->work;
 
-	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
+	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))) {
+		unsigned int lcpu;
+
 		BUG_ON(timer_pending(timer));
 		BUG_ON(!list_empty(&work->entry));
 
 		timer_stats_timer_set_start_info(&dwork->timer);
 
-		/* This stores cwq for the moment, for the timer_fn */
-		set_wq_data(work, wq_per_cpu(wq, raw_smp_processor_id()));
+		/*
+		 * This stores cwq for the moment, for the timer_fn.
+		 * Note that the work's gcwq is preserved to allow
+		 * reentrance detection for delayed works.
+		 */
+		if (!(wq->flags & WQ_UNBOUND)) {
+			struct global_cwq *gcwq = get_work_gcwq(work);
+
+			if (gcwq && gcwq->cpu != WORK_CPU_UNBOUND)
+				lcpu = gcwq->cpu;
+			else
+				lcpu = raw_smp_processor_id();
+		} else
+			lcpu = WORK_CPU_UNBOUND;
+
+		set_work_cwq(work, get_cwq(lcpu, wq), 0);
+
 		timer->expires = jiffies + delay;
 		timer->data = (unsigned long)dwork;
 		timer->function = delayed_work_timer_fn;
@@ -382,80 +1124,872 @@ int queue_delayed_work_on(int cpu, struct workqueue_struct *wq,
 }
 EXPORT_SYMBOL_GPL(queue_delayed_work_on);
 
-static void run_workqueue(struct cpu_workqueue_struct *cwq)
+/**
+ * worker_enter_idle - enter idle state
+ * @worker: worker which is entering idle state
+ *
+ * @worker is entering idle state.  Update stats and idle timer if
+ * necessary.
+ *
+ * LOCKING:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void worker_enter_idle(struct worker *worker)
 {
-	spin_lock_irq(&cwq->lock);
-	while (!list_empty(&cwq->worklist)) {
-		struct work_struct *work = list_entry(cwq->worklist.next,
-						struct work_struct, entry);
-		work_func_t f = work->func;
-#ifdef CONFIG_LOCKDEP
+	struct global_cwq *gcwq = worker->gcwq;
+
+	BUG_ON(worker->flags & WORKER_IDLE);
+	BUG_ON(!list_empty(&worker->entry) &&
+	       (worker->hentry.next || worker->hentry.pprev));
+
+	/* can't use worker_set_flags(), also called from start_worker() */
+	worker->flags |= WORKER_IDLE;
+	gcwq->nr_idle++;
+	worker->last_active = jiffies;
+
+	/* idle_list is LIFO */
+	list_add(&worker->entry, &gcwq->idle_list);
+
+	if (likely(!(worker->flags & WORKER_ROGUE))) {
+		if (too_many_workers(gcwq) && !timer_pending(&gcwq->idle_timer))
+			mod_timer(&gcwq->idle_timer,
+				  jiffies + IDLE_WORKER_TIMEOUT);
+	} else
+		wake_up_all(&gcwq->trustee_wait);
+
+	/* sanity check nr_running */
+	WARN_ON_ONCE(gcwq->nr_workers == gcwq->nr_idle &&
+		     atomic_read(get_gcwq_nr_running(gcwq->cpu)));
+}
+
+/**
+ * worker_leave_idle - leave idle state
+ * @worker: worker which is leaving idle state
+ *
+ * @worker is leaving idle state.  Update stats.
+ *
+ * LOCKING:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void worker_leave_idle(struct worker *worker)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+
+	BUG_ON(!(worker->flags & WORKER_IDLE));
+	worker_clr_flags(worker, WORKER_IDLE);
+	gcwq->nr_idle--;
+	list_del_init(&worker->entry);
+}
+
+/**
+ * worker_maybe_bind_and_lock - bind worker to its cpu if possible and lock gcwq
+ * @worker: self
+ *
+ * Works which are scheduled while the cpu is online must at least be
+ * scheduled to a worker which is bound to the cpu so that if they are
+ * flushed from cpu callbacks while cpu is going down, they are
+ * guaranteed to execute on the cpu.
+ *
+ * This function is to be used by rogue workers and rescuers to bind
+ * themselves to the target cpu and may race with cpu going down or
+ * coming online.  kthread_bind() can't be used because it may put the
+ * worker to already dead cpu and set_cpus_allowed_ptr() can't be used
+ * verbatim as it's best effort and blocking and gcwq may be
+ * [dis]associated in the meantime.
+ *
+ * This function tries set_cpus_allowed() and locks gcwq and verifies
+ * the binding against GCWQ_DISASSOCIATED which is set during
+ * CPU_DYING and cleared during CPU_ONLINE, so if the worker enters
+ * idle state or fetches works without dropping lock, it can guarantee
+ * the scheduling requirement described in the first paragraph.
+ *
+ * CONTEXT:
+ * Might sleep.  Called without any lock but returns with gcwq->lock
+ * held.
+ *
+ * RETURNS:
+ * %true if the associated gcwq is online (@worker is successfully
+ * bound), %false if offline.
+ */
+static bool worker_maybe_bind_and_lock(struct worker *worker)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+	struct task_struct *task = worker->task;
+
+	while (true) {
 		/*
-		 * It is permissible to free the struct work_struct
-		 * from inside the function that is called from it,
-		 * this we need to take into account for lockdep too.
-		 * To avoid bogus "held lock freed" warnings as well
-		 * as problems when looking into work->lockdep_map,
-		 * make a copy and use that here.
+		 * The following call may fail, succeed or succeed
+		 * without actually migrating the task to the cpu if
+		 * it races with cpu hotunplug operation.  Verify
+		 * against GCWQ_DISASSOCIATED.
 		 */
-		struct lockdep_map lockdep_map = work->lockdep_map;
-#endif
-		trace_workqueue_execution(cwq->thread, work);
-		debug_work_deactivate(work);
-		cwq->current_work = work;
-		list_del_init(cwq->worklist.next);
-		spin_unlock_irq(&cwq->lock);
-
-		BUG_ON(get_wq_data(work) != cwq);
-		work_clear_pending(work);
-		lock_map_acquire(&cwq->wq->lockdep_map);
-		lock_map_acquire(&lockdep_map);
-		f(work);
-		lock_map_release(&lockdep_map);
-		lock_map_release(&cwq->wq->lockdep_map);
-
-		if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
-			printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
-					"%s/0x%08x/%d\n",
-					current->comm, preempt_count(),
-				       	task_pid_nr(current));
-			printk(KERN_ERR "    last function: ");
-			print_symbol("%s\n", (unsigned long)f);
-			debug_show_held_locks(current);
-			dump_stack();
+		if (!(gcwq->flags & GCWQ_DISASSOCIATED))
+			set_cpus_allowed_ptr(task, get_cpu_mask(gcwq->cpu));
+
+		spin_lock_irq(&gcwq->lock);
+		if (gcwq->flags & GCWQ_DISASSOCIATED)
+			return false;
+		if (task_cpu(task) == gcwq->cpu &&
+		    cpumask_equal(&current->cpus_allowed,
+				  get_cpu_mask(gcwq->cpu)))
+			return true;
+		spin_unlock_irq(&gcwq->lock);
+
+		/* CPU has come up inbetween, retry migration */
+		cpu_relax();
+	}
+}
+
+/*
+ * Function for worker->rebind_work used to rebind rogue busy workers
+ * to the associated cpu which is coming back online.  This is
+ * scheduled by cpu up but can race with other cpu hotplug operations
+ * and may be executed twice without intervening cpu down.
+ */
+static void worker_rebind_fn(struct work_struct *work)
+{
+	struct worker *worker = container_of(work, struct worker, rebind_work);
+	struct global_cwq *gcwq = worker->gcwq;
+
+	if (worker_maybe_bind_and_lock(worker))
+		worker_clr_flags(worker, WORKER_REBIND);
+
+	spin_unlock_irq(&gcwq->lock);
+}
+
+static struct worker *alloc_worker(void)
+{
+	struct worker *worker;
+
+	worker = kzalloc(sizeof(*worker), GFP_KERNEL);
+	if (worker) {
+		INIT_LIST_HEAD(&worker->entry);
+		INIT_LIST_HEAD(&worker->scheduled);
+		INIT_WORK(&worker->rebind_work, worker_rebind_fn);
+		/* on creation a worker is in !idle && prep state */
+		worker->flags = WORKER_PREP;
+	}
+	return worker;
+}
+
+/**
+ * create_worker - create a new workqueue worker
+ * @gcwq: gcwq the new worker will belong to
+ * @bind: whether to set affinity to @cpu or not
+ *
+ * Create a new worker which is bound to @gcwq.  The returned worker
+ * can be started by calling start_worker() or destroyed using
+ * destroy_worker().
+ *
+ * CONTEXT:
+ * Might sleep.  Does GFP_KERNEL allocations.
+ *
+ * RETURNS:
+ * Pointer to the newly created worker.
+ */
+static struct worker *create_worker(struct global_cwq *gcwq, bool bind)
+{
+	bool on_unbound_cpu = gcwq->cpu == WORK_CPU_UNBOUND;
+	struct worker *worker = NULL;
+	int id = -1;
+
+	spin_lock_irq(&gcwq->lock);
+	while (ida_get_new(&gcwq->worker_ida, &id)) {
+		spin_unlock_irq(&gcwq->lock);
+		if (!ida_pre_get(&gcwq->worker_ida, GFP_KERNEL))
+			goto fail;
+		spin_lock_irq(&gcwq->lock);
+	}
+	spin_unlock_irq(&gcwq->lock);
+
+	worker = alloc_worker();
+	if (!worker)
+		goto fail;
+
+	worker->gcwq = gcwq;
+	worker->id = id;
+
+	if (!on_unbound_cpu)
+		worker->task = kthread_create(worker_thread, worker,
+					      "kworker/%u:%d", gcwq->cpu, id);
+	else
+		worker->task = kthread_create(worker_thread, worker,
+					      "kworker/u:%d", id);
+	if (IS_ERR(worker->task))
+		goto fail;
+
+	/*
+	 * A rogue worker will become a regular one if CPU comes
+	 * online later on.  Make sure every worker has
+	 * PF_THREAD_BOUND set.
+	 */
+	if (bind && !on_unbound_cpu)
+		kthread_bind(worker->task, gcwq->cpu);
+	else {
+		worker->task->flags |= PF_THREAD_BOUND;
+		if (on_unbound_cpu)
+			worker->flags |= WORKER_UNBOUND;
+	}
+
+	return worker;
+fail:
+	if (id >= 0) {
+		spin_lock_irq(&gcwq->lock);
+		ida_remove(&gcwq->worker_ida, id);
+		spin_unlock_irq(&gcwq->lock);
+	}
+	kfree(worker);
+	return NULL;
+}
+
+/**
+ * start_worker - start a newly created worker
+ * @worker: worker to start
+ *
+ * Make the gcwq aware of @worker and start it.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void start_worker(struct worker *worker)
+{
+	worker->flags |= WORKER_STARTED;
+	worker->gcwq->nr_workers++;
+	worker_enter_idle(worker);
+	wake_up_process(worker->task);
+}
+
+/**
+ * destroy_worker - destroy a workqueue worker
+ * @worker: worker to be destroyed
+ *
+ * Destroy @worker and adjust @gcwq stats accordingly.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which is released and regrabbed.
+ */
+static void destroy_worker(struct worker *worker)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+	int id = worker->id;
+
+	/* sanity check frenzy */
+	BUG_ON(worker->current_work);
+	BUG_ON(!list_empty(&worker->scheduled));
+
+	if (worker->flags & WORKER_STARTED)
+		gcwq->nr_workers--;
+	if (worker->flags & WORKER_IDLE)
+		gcwq->nr_idle--;
+
+	list_del_init(&worker->entry);
+	worker->flags |= WORKER_DIE;
+
+	spin_unlock_irq(&gcwq->lock);
+
+	kthread_stop(worker->task);
+	kfree(worker);
+
+	spin_lock_irq(&gcwq->lock);
+	ida_remove(&gcwq->worker_ida, id);
+}
+
+static void idle_worker_timeout(unsigned long __gcwq)
+{
+	struct global_cwq *gcwq = (void *)__gcwq;
+
+	spin_lock_irq(&gcwq->lock);
+
+	if (too_many_workers(gcwq)) {
+		struct worker *worker;
+		unsigned long expires;
+
+		/* idle_list is kept in LIFO order, check the last one */
+		worker = list_entry(gcwq->idle_list.prev, struct worker, entry);
+		expires = worker->last_active + IDLE_WORKER_TIMEOUT;
+
+		if (time_before(jiffies, expires))
+			mod_timer(&gcwq->idle_timer, expires);
+		else {
+			/* it's been idle for too long, wake up manager */
+			gcwq->flags |= GCWQ_MANAGE_WORKERS;
+			wake_up_worker(gcwq);
+		}
+	}
+
+	spin_unlock_irq(&gcwq->lock);
+}
+
+static bool send_mayday(struct work_struct *work)
+{
+	struct cpu_workqueue_struct *cwq = get_work_cwq(work);
+	struct workqueue_struct *wq = cwq->wq;
+	unsigned int cpu;
+
+	if (!(wq->flags & WQ_RESCUER))
+		return false;
+
+	/* mayday mayday mayday */
+	cpu = cwq->gcwq->cpu;
+	/* WORK_CPU_UNBOUND can't be set in cpumask, use cpu 0 instead */
+	if (cpu == WORK_CPU_UNBOUND)
+		cpu = 0;
+	if (!mayday_test_and_set_cpu(cpu, wq->mayday_mask))
+		wake_up_process(wq->rescuer->task);
+	return true;
+}
+
+static void gcwq_mayday_timeout(unsigned long __gcwq)
+{
+	struct global_cwq *gcwq = (void *)__gcwq;
+	struct work_struct *work;
+
+	spin_lock_irq(&gcwq->lock);
+
+	if (need_to_create_worker(gcwq)) {
+		/*
+		 * We've been trying to create a new worker but
+		 * haven't been successful.  We might be hitting an
+		 * allocation deadlock.  Send distress signals to
+		 * rescuers.
+		 */
+		list_for_each_entry(work, &gcwq->worklist, entry)
+			send_mayday(work);
+	}
+
+	spin_unlock_irq(&gcwq->lock);
+
+	mod_timer(&gcwq->mayday_timer, jiffies + MAYDAY_INTERVAL);
+}
+
+/**
+ * maybe_create_worker - create a new worker if necessary
+ * @gcwq: gcwq to create a new worker for
+ *
+ * Create a new worker for @gcwq if necessary.  @gcwq is guaranteed to
+ * have at least one idle worker on return from this function.  If
+ * creating a new worker takes longer than MAYDAY_INTERVAL, mayday is
+ * sent to all rescuers with works scheduled on @gcwq to resolve
+ * possible allocation deadlock.
+ *
+ * On return, need_to_create_worker() is guaranteed to be false and
+ * may_start_working() true.
+ *
+ * LOCKING:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  Does GFP_KERNEL allocations.  Called only from
+ * manager.
+ *
+ * RETURNS:
+ * false if no action was taken and gcwq->lock stayed locked, true
+ * otherwise.
+ */
+static bool maybe_create_worker(struct global_cwq *gcwq)
+{
+	if (!need_to_create_worker(gcwq))
+		return false;
+restart:
+	spin_unlock_irq(&gcwq->lock);
+
+	/* if we don't make progress in MAYDAY_INITIAL_TIMEOUT, call for help */
+	mod_timer(&gcwq->mayday_timer, jiffies + MAYDAY_INITIAL_TIMEOUT);
+
+	while (true) {
+		struct worker *worker;
+
+		worker = create_worker(gcwq, true);
+		if (worker) {
+			del_timer_sync(&gcwq->mayday_timer);
+			spin_lock_irq(&gcwq->lock);
+			start_worker(worker);
+			BUG_ON(need_to_create_worker(gcwq));
+			return true;
 		}
 
-		spin_lock_irq(&cwq->lock);
-		cwq->current_work = NULL;
+		if (!need_to_create_worker(gcwq))
+			break;
+
+		__set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(CREATE_COOLDOWN);
+
+		if (!need_to_create_worker(gcwq))
+			break;
 	}
-	spin_unlock_irq(&cwq->lock);
+
+	del_timer_sync(&gcwq->mayday_timer);
+	spin_lock_irq(&gcwq->lock);
+	if (need_to_create_worker(gcwq))
+		goto restart;
+	return true;
 }
 
-static int worker_thread(void *__cwq)
+/**
+ * maybe_destroy_worker - destroy workers which have been idle for a while
+ * @gcwq: gcwq to destroy workers for
+ *
+ * Destroy @gcwq workers which have been idle for longer than
+ * IDLE_WORKER_TIMEOUT.
+ *
+ * LOCKING:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  Called only from manager.
+ *
+ * RETURNS:
+ * false if no action was taken and gcwq->lock stayed locked, true
+ * otherwise.
+ */
+static bool maybe_destroy_workers(struct global_cwq *gcwq)
 {
-	struct cpu_workqueue_struct *cwq = __cwq;
-	DEFINE_WAIT(wait);
+	bool ret = false;
 
-	if (cwq->wq->freezeable)
-		set_freezable();
+	while (too_many_workers(gcwq)) {
+		struct worker *worker;
+		unsigned long expires;
 
-	for (;;) {
-		prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE);
-		if (!freezing(current) &&
-		    !kthread_should_stop() &&
-		    list_empty(&cwq->worklist))
-			schedule();
-		finish_wait(&cwq->more_work, &wait);
+		worker = list_entry(gcwq->idle_list.prev, struct worker, entry);
+		expires = worker->last_active + IDLE_WORKER_TIMEOUT;
 
-		try_to_freeze();
+		if (time_before(jiffies, expires)) {
+			mod_timer(&gcwq->idle_timer, expires);
+			break;
+		}
 
-		if (kthread_should_stop())
+		destroy_worker(worker);
+		ret = true;
+	}
+
+	return ret;
+}
+
+/**
+ * manage_workers - manage worker pool
+ * @worker: self
+ *
+ * Assume the manager role and manage gcwq worker pool @worker belongs
+ * to.  At any given time, there can be only zero or one manager per
+ * gcwq.  The exclusion is handled automatically by this function.
+ *
+ * The caller can safely start processing works on false return.  On
+ * true return, it's guaranteed that need_to_create_worker() is false
+ * and may_start_working() is true.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  Does GFP_KERNEL allocations.
+ *
+ * RETURNS:
+ * false if no action was taken and gcwq->lock stayed locked, true if
+ * some action was taken.
+ */
+static bool manage_workers(struct worker *worker)
+{
+	struct global_cwq *gcwq = worker->gcwq;
+	bool ret = false;
+
+	if (gcwq->flags & GCWQ_MANAGING_WORKERS)
+		return ret;
+
+	gcwq->flags &= ~GCWQ_MANAGE_WORKERS;
+	gcwq->flags |= GCWQ_MANAGING_WORKERS;
+
+	/*
+	 * Destroy and then create so that may_start_working() is true
+	 * on return.
+	 */
+	ret |= maybe_destroy_workers(gcwq);
+	ret |= maybe_create_worker(gcwq);
+
+	gcwq->flags &= ~GCWQ_MANAGING_WORKERS;
+
+	/*
+	 * The trustee might be waiting to take over the manager
+	 * position, tell it we're done.
+	 */
+	if (unlikely(gcwq->trustee))
+		wake_up_all(&gcwq->trustee_wait);
+
+	return ret;
+}
+
+/**
+ * move_linked_works - move linked works to a list
+ * @work: start of series of works to be scheduled
+ * @head: target list to append @work to
+ * @nextp: out paramter for nested worklist walking
+ *
+ * Schedule linked works starting from @work to @head.  Work series to
+ * be scheduled starts at @work and includes any consecutive work with
+ * WORK_STRUCT_LINKED set in its predecessor.
+ *
+ * If @nextp is not NULL, it's updated to point to the next work of
+ * the last scheduled work.  This allows move_linked_works() to be
+ * nested inside outer list_for_each_entry_safe().
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void move_linked_works(struct work_struct *work, struct list_head *head,
+			      struct work_struct **nextp)
+{
+	struct work_struct *n;
+
+	/*
+	 * Linked worklist will always end before the end of the list,
+	 * use NULL for list head.
+	 */
+	list_for_each_entry_safe_from(work, n, NULL, entry) {
+		list_move_tail(&work->entry, head);
+		if (!(*work_data_bits(work) & WORK_STRUCT_LINKED))
 			break;
+	}
+
+	/*
+	 * If we're already inside safe list traversal and have moved
+	 * multiple works to the scheduled queue, the next position
+	 * needs to be updated.
+	 */
+	if (nextp)
+		*nextp = n;
+}
+
+static void cwq_activate_first_delayed(struct cpu_workqueue_struct *cwq)
+{
+	struct work_struct *work = list_first_entry(&cwq->delayed_works,
+						    struct work_struct, entry);
+	struct list_head *pos = gcwq_determine_ins_pos(cwq->gcwq, cwq);
+
+	move_linked_works(work, pos, NULL);
+	cwq->nr_active++;
+}
 
-		run_workqueue(cwq);
+/**
+ * cwq_dec_nr_in_flight - decrement cwq's nr_in_flight
+ * @cwq: cwq of interest
+ * @color: color of work which left the queue
+ *
+ * A work either has completed or is removed from pending queue,
+ * decrement nr_in_flight of its cwq and handle workqueue flushing.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
+static void cwq_dec_nr_in_flight(struct cpu_workqueue_struct *cwq, int color)
+{
+	/* ignore uncolored works */
+	if (color == WORK_NO_COLOR)
+		return;
+
+	cwq->nr_in_flight[color]--;
+	cwq->nr_active--;
+
+	if (!list_empty(&cwq->delayed_works)) {
+		/* one down, submit a delayed one */
+		if (cwq->nr_active < cwq->max_active)
+			cwq_activate_first_delayed(cwq);
 	}
 
-	return 0;
+	/* is flush in progress and are we at the flushing tip? */
+	if (likely(cwq->flush_color != color))
+		return;
+
+	/* are there still in-flight works? */
+	if (cwq->nr_in_flight[color])
+		return;
+
+	/* this cwq is done, clear flush_color */
+	cwq->flush_color = -1;
+
+	/*
+	 * If this was the last cwq, wake up the first flusher.  It
+	 * will handle the rest.
+	 */
+	if (atomic_dec_and_test(&cwq->wq->nr_cwqs_to_flush))
+		complete(&cwq->wq->first_flusher->done);
+}
+
+/**
+ * process_one_work - process single work
+ * @worker: self
+ * @work: work to process
+ *
+ * Process @work.  This function contains all the logics necessary to
+ * process a single work including synchronization against and
+ * interaction with other workers on the same cpu, queueing and
+ * flushing.  As long as context requirement is met, any worker can
+ * call this function to process a work.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which is released and regrabbed.
+ */
+static void process_one_work(struct worker *worker, struct work_struct *work)
+{
+	struct cpu_workqueue_struct *cwq = get_work_cwq(work);
+	struct global_cwq *gcwq = cwq->gcwq;
+	struct hlist_head *bwh = busy_worker_head(gcwq, work);
+	bool cpu_intensive = cwq->wq->flags & WQ_CPU_INTENSIVE;
+	work_func_t f = work->func;
+	int work_color;
+	struct worker *collision;
+#ifdef CONFIG_LOCKDEP
+	/*
+	 * It is permissible to free the struct work_struct from
+	 * inside the function that is called from it, this we need to
+	 * take into account for lockdep too.  To avoid bogus "held
+	 * lock freed" warnings as well as problems when looking into
+	 * work->lockdep_map, make a copy and use that here.
+	 */
+	struct lockdep_map lockdep_map = work->lockdep_map;
+#endif
+	/*
+	 * A single work shouldn't be executed concurrently by
+	 * multiple workers on a single cpu.  Check whether anyone is
+	 * already processing the work.  If so, defer the work to the
+	 * currently executing one.
+	 */
+	collision = __find_worker_executing_work(gcwq, bwh, work);
+	if (unlikely(collision)) {
+		move_linked_works(work, &collision->scheduled, NULL);
+		return;
+	}
+
+	/* claim and process */
+	debug_work_deactivate(work);
+	hlist_add_head(&worker->hentry, bwh);
+	worker->current_work = work;
+	worker->current_cwq = cwq;
+	work_color = get_work_color(work);
+
+	/* record the current cpu number in the work data and dequeue */
+	set_work_cpu(work, gcwq->cpu);
+	list_del_init(&work->entry);
+
+	/*
+	 * If HIGHPRI_PENDING, check the next work, and, if HIGHPRI,
+	 * wake up another worker; otherwise, clear HIGHPRI_PENDING.
+	 */
+	if (unlikely(gcwq->flags & GCWQ_HIGHPRI_PENDING)) {
+		struct work_struct *nwork = list_first_entry(&gcwq->worklist,
+						struct work_struct, entry);
+
+		if (!list_empty(&gcwq->worklist) &&
+		    get_work_cwq(nwork)->wq->flags & WQ_HIGHPRI)
+			wake_up_worker(gcwq);
+		else
+			gcwq->flags &= ~GCWQ_HIGHPRI_PENDING;
+	}
+
+	/*
+	 * CPU intensive works don't participate in concurrency
+	 * management.  They're the scheduler's responsibility.
+	 */
+	if (unlikely(cpu_intensive))
+		worker_set_flags(worker, WORKER_CPU_INTENSIVE, true);
+
+	spin_unlock_irq(&gcwq->lock);
+
+	work_clear_pending(work);
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_acquire(&lockdep_map);
+	f(work);
+	lock_map_release(&lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
+
+	if (unlikely(in_atomic() || lockdep_depth(current) > 0)) {
+		printk(KERN_ERR "BUG: workqueue leaked lock or atomic: "
+		       "%s/0x%08x/%d\n",
+		       current->comm, preempt_count(), task_pid_nr(current));
+		printk(KERN_ERR "    last function: ");
+		print_symbol("%s\n", (unsigned long)f);
+		debug_show_held_locks(current);
+		dump_stack();
+	}
+
+	spin_lock_irq(&gcwq->lock);
+
+	/* clear cpu intensive status */
+	if (unlikely(cpu_intensive))
+		worker_clr_flags(worker, WORKER_CPU_INTENSIVE);
+
+	/* we're done with it, release */
+	hlist_del_init(&worker->hentry);
+	worker->current_work = NULL;
+	worker->current_cwq = NULL;
+	cwq_dec_nr_in_flight(cwq, work_color);
+}
+
+/**
+ * process_scheduled_works - process scheduled works
+ * @worker: self
+ *
+ * Process all scheduled works.  Please note that the scheduled list
+ * may change while processing a work, so this function repeatedly
+ * fetches a work from the top and executes it.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.
+ */
+static void process_scheduled_works(struct worker *worker)
+{
+	while (!list_empty(&worker->scheduled)) {
+		struct work_struct *work = list_first_entry(&worker->scheduled,
+						struct work_struct, entry);
+		process_one_work(worker, work);
+	}
+}
+
+/**
+ * worker_thread - the worker thread function
+ * @__worker: self
+ *
+ * The gcwq worker thread function.  There's a single dynamic pool of
+ * these per each cpu.  These workers process all works regardless of
+ * their specific target workqueue.  The only exception is works which
+ * belong to workqueues with a rescuer which will be explained in
+ * rescuer_thread().
+ */
+static int worker_thread(void *__worker)
+{
+	struct worker *worker = __worker;
+	struct global_cwq *gcwq = worker->gcwq;
+
+	/* tell the scheduler that this is a workqueue worker */
+	worker->task->flags |= PF_WQ_WORKER;
+woke_up:
+	spin_lock_irq(&gcwq->lock);
+
+	/* DIE can be set only while we're idle, checking here is enough */
+	if (worker->flags & WORKER_DIE) {
+		spin_unlock_irq(&gcwq->lock);
+		worker->task->flags &= ~PF_WQ_WORKER;
+		return 0;
+	}
+
+	worker_leave_idle(worker);
+recheck:
+	/* no more worker necessary? */
+	if (!need_more_worker(gcwq))
+		goto sleep;
+
+	/* do we need to manage? */
+	if (unlikely(!may_start_working(gcwq)) && manage_workers(worker))
+		goto recheck;
+
+	/*
+	 * ->scheduled list can only be filled while a worker is
+	 * preparing to process a work or actually processing it.
+	 * Make sure nobody diddled with it while I was sleeping.
+	 */
+	BUG_ON(!list_empty(&worker->scheduled));
+
+	/*
+	 * When control reaches this point, we're guaranteed to have
+	 * at least one idle worker or that someone else has already
+	 * assumed the manager role.
+	 */
+	worker_clr_flags(worker, WORKER_PREP);
+
+	do {
+		struct work_struct *work =
+			list_first_entry(&gcwq->worklist,
+					 struct work_struct, entry);
+
+		if (likely(!(*work_data_bits(work) & WORK_STRUCT_LINKED))) {
+			/* optimization path, not strictly necessary */
+			process_one_work(worker, work);
+			if (unlikely(!list_empty(&worker->scheduled)))
+				process_scheduled_works(worker);
+		} else {
+			move_linked_works(work, &worker->scheduled, NULL);
+			process_scheduled_works(worker);
+		}
+	} while (keep_working(gcwq));
+
+	worker_set_flags(worker, WORKER_PREP, false);
+sleep:
+	if (unlikely(need_to_manage_workers(gcwq)) && manage_workers(worker))
+		goto recheck;
+
+	/*
+	 * gcwq->lock is held and there's no work to process and no
+	 * need to manage, sleep.  Workers are woken up only while
+	 * holding gcwq->lock or from local cpu, so setting the
+	 * current state before releasing gcwq->lock is enough to
+	 * prevent losing any event.
+	 */
+	worker_enter_idle(worker);
+	__set_current_state(TASK_INTERRUPTIBLE);
+	spin_unlock_irq(&gcwq->lock);
+	schedule();
+	goto woke_up;
+}
+
+/**
+ * rescuer_thread - the rescuer thread function
+ * @__wq: the associated workqueue
+ *
+ * Workqueue rescuer thread function.  There's one rescuer for each
+ * workqueue which has WQ_RESCUER set.
+ *
+ * Regular work processing on a gcwq may block trying to create a new
+ * worker which uses GFP_KERNEL allocation which has slight chance of
+ * developing into deadlock if some works currently on the same queue
+ * need to be processed to satisfy the GFP_KERNEL allocation.  This is
+ * the problem rescuer solves.
+ *
+ * When such condition is possible, the gcwq summons rescuers of all
+ * workqueues which have works queued on the gcwq and let them process
+ * those works so that forward progress can be guaranteed.
+ *
+ * This should happen rarely.
+ */
+static int rescuer_thread(void *__wq)
+{
+	struct workqueue_struct *wq = __wq;
+	struct worker *rescuer = wq->rescuer;
+	struct list_head *scheduled = &rescuer->scheduled;
+	bool is_unbound = wq->flags & WQ_UNBOUND;
+	unsigned int cpu;
+
+	set_user_nice(current, RESCUER_NICE_LEVEL);
+repeat:
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	if (kthread_should_stop())
+		return 0;
+
+	/*
+	 * See whether any cpu is asking for help.  Unbounded
+	 * workqueues use cpu 0 in mayday_mask for CPU_UNBOUND.
+	 */
+	for_each_mayday_cpu(cpu, wq->mayday_mask) {
+		unsigned int tcpu = is_unbound ? WORK_CPU_UNBOUND : cpu;
+		struct cpu_workqueue_struct *cwq = get_cwq(tcpu, wq);
+		struct global_cwq *gcwq = cwq->gcwq;
+		struct work_struct *work, *n;
+
+		__set_current_state(TASK_RUNNING);
+		mayday_clear_cpu(cpu, wq->mayday_mask);
+
+		/* migrate to the target cpu if possible */
+		rescuer->gcwq = gcwq;
+		worker_maybe_bind_and_lock(rescuer);
+
+		/*
+		 * Slurp in all works issued via this workqueue and
+		 * process'em.
+		 */
+		BUG_ON(!list_empty(&rescuer->scheduled));
+		list_for_each_entry_safe(work, n, &gcwq->worklist, entry)
+			if (get_work_cwq(work) == cwq)
+				move_linked_works(work, scheduled, &n);
+
+		process_scheduled_works(rescuer);
+		spin_unlock_irq(&gcwq->lock);
+	}
+
+	schedule();
+	goto repeat;
 }
 
 struct wq_barrier {
@@ -469,44 +2003,137 @@ static void wq_barrier_func(struct work_struct *work)
 	complete(&barr->done);
 }
 
+/**
+ * insert_wq_barrier - insert a barrier work
+ * @cwq: cwq to insert barrier into
+ * @barr: wq_barrier to insert
+ * @target: target work to attach @barr to
+ * @worker: worker currently executing @target, NULL if @target is not executing
+ *
+ * @barr is linked to @target such that @barr is completed only after
+ * @target finishes execution.  Please note that the ordering
+ * guarantee is observed only with respect to @target and on the local
+ * cpu.
+ *
+ * Currently, a queued barrier can't be canceled.  This is because
+ * try_to_grab_pending() can't determine whether the work to be
+ * grabbed is at the head of the queue and thus can't clear LINKED
+ * flag of the previous work while there must be a valid next work
+ * after a work with LINKED flag set.
+ *
+ * Note that when @worker is non-NULL, @target may be modified
+ * underneath us, so we can't reliably determine cwq from @target.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock).
+ */
 static void insert_wq_barrier(struct cpu_workqueue_struct *cwq,
-			struct wq_barrier *barr, struct list_head *head)
+			      struct wq_barrier *barr,
+			      struct work_struct *target, struct worker *worker)
 {
+	struct list_head *head;
+	unsigned int linked = 0;
+
 	/*
-	 * debugobject calls are safe here even with cwq->lock locked
+	 * debugobject calls are safe here even with gcwq->lock locked
 	 * as we know for sure that this will not trigger any of the
 	 * checks and call back into the fixup functions where we
 	 * might deadlock.
 	 */
 	INIT_WORK_ON_STACK(&barr->work, wq_barrier_func);
-	__set_bit(WORK_STRUCT_PENDING, work_data_bits(&barr->work));
-
+	__set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(&barr->work));
 	init_completion(&barr->done);
 
+	/*
+	 * If @target is currently being executed, schedule the
+	 * barrier to the worker; otherwise, put it after @target.
+	 */
+	if (worker)
+		head = worker->scheduled.next;
+	else {
+		unsigned long *bits = work_data_bits(target);
+
+		head = target->entry.next;
+		/* there can already be other linked works, inherit and set */
+		linked = *bits & WORK_STRUCT_LINKED;
+		__set_bit(WORK_STRUCT_LINKED_BIT, bits);
+	}
+
 	debug_work_activate(&barr->work);
-	insert_work(cwq, &barr->work, head);
+	insert_work(cwq, &barr->work, head,
+		    work_color_to_flags(WORK_NO_COLOR) | linked);
 }
 
-static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
+/**
+ * flush_workqueue_prep_cwqs - prepare cwqs for workqueue flushing
+ * @wq: workqueue being flushed
+ * @flush_color: new flush color, < 0 for no-op
+ * @work_color: new work color, < 0 for no-op
+ *
+ * Prepare cwqs for workqueue flushing.
+ *
+ * If @flush_color is non-negative, flush_color on all cwqs should be
+ * -1.  If no cwq has in-flight commands at the specified color, all
+ * cwq->flush_color's stay at -1 and %false is returned.  If any cwq
+ * has in flight commands, its cwq->flush_color is set to
+ * @flush_color, @wq->nr_cwqs_to_flush is updated accordingly, cwq
+ * wakeup logic is armed and %true is returned.
+ *
+ * The caller should have initialized @wq->first_flusher prior to
+ * calling this function with non-negative @flush_color.  If
+ * @flush_color is negative, no flush color update is done and %false
+ * is returned.
+ *
+ * If @work_color is non-negative, all cwqs should have the same
+ * work_color which is previous to @work_color and all will be
+ * advanced to @work_color.
+ *
+ * CONTEXT:
+ * mutex_lock(wq->flush_mutex).
+ *
+ * RETURNS:
+ * %true if @flush_color >= 0 and there's something to flush.  %false
+ * otherwise.
+ */
+static bool flush_workqueue_prep_cwqs(struct workqueue_struct *wq,
+				      int flush_color, int work_color)
 {
-	int active = 0;
-	struct wq_barrier barr;
+	bool wait = false;
+	unsigned int cpu;
 
-	WARN_ON(cwq->thread == current);
-
-	spin_lock_irq(&cwq->lock);
-	if (!list_empty(&cwq->worklist) || cwq->current_work != NULL) {
-		insert_wq_barrier(cwq, &barr, &cwq->worklist);
-		active = 1;
+	if (flush_color >= 0) {
+		BUG_ON(atomic_read(&wq->nr_cwqs_to_flush));
+		atomic_set(&wq->nr_cwqs_to_flush, 1);
 	}
-	spin_unlock_irq(&cwq->lock);
 
-	if (active) {
-		wait_for_completion(&barr.done);
-		destroy_work_on_stack(&barr.work);
+	for_each_cwq_cpu(cpu, wq) {
+		struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+		struct global_cwq *gcwq = cwq->gcwq;
+
+		spin_lock_irq(&gcwq->lock);
+
+		if (flush_color >= 0) {
+			BUG_ON(cwq->flush_color != -1);
+
+			if (cwq->nr_in_flight[flush_color]) {
+				cwq->flush_color = flush_color;
+				atomic_inc(&wq->nr_cwqs_to_flush);
+				wait = true;
+			}
+		}
+
+		if (work_color >= 0) {
+			BUG_ON(work_color != work_next_color(cwq->work_color));
+			cwq->work_color = work_color;
+		}
+
+		spin_unlock_irq(&gcwq->lock);
 	}
 
-	return active;
+	if (flush_color >= 0 && atomic_dec_and_test(&wq->nr_cwqs_to_flush))
+		complete(&wq->first_flusher->done);
+
+	return wait;
 }
 
 /**
@@ -518,20 +2145,150 @@ static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)
  *
  * We sleep until all works which were queued on entry have been handled,
  * but we are not livelocked by new incoming ones.
- *
- * This function used to run the workqueues itself.  Now we just wait for the
- * helper threads to do it.
  */
 void flush_workqueue(struct workqueue_struct *wq)
 {
-	const struct cpumask *cpu_map = wq_cpu_map(wq);
-	int cpu;
+	struct wq_flusher this_flusher = {
+		.list = LIST_HEAD_INIT(this_flusher.list),
+		.flush_color = -1,
+		.done = COMPLETION_INITIALIZER_ONSTACK(this_flusher.done),
+	};
+	int next_color;
 
-	might_sleep();
 	lock_map_acquire(&wq->lockdep_map);
 	lock_map_release(&wq->lockdep_map);
-	for_each_cpu(cpu, cpu_map)
-		flush_cpu_workqueue(per_cpu_ptr(wq->cpu_wq, cpu));
+
+	mutex_lock(&wq->flush_mutex);
+
+	/*
+	 * Start-to-wait phase
+	 */
+	next_color = work_next_color(wq->work_color);
+
+	if (next_color != wq->flush_color) {
+		/*
+		 * Color space is not full.  The current work_color
+		 * becomes our flush_color and work_color is advanced
+		 * by one.
+		 */
+		BUG_ON(!list_empty(&wq->flusher_overflow));
+		this_flusher.flush_color = wq->work_color;
+		wq->work_color = next_color;
+
+		if (!wq->first_flusher) {
+			/* no flush in progress, become the first flusher */
+			BUG_ON(wq->flush_color != this_flusher.flush_color);
+
+			wq->first_flusher = &this_flusher;
+
+			if (!flush_workqueue_prep_cwqs(wq, wq->flush_color,
+						       wq->work_color)) {
+				/* nothing to flush, done */
+				wq->flush_color = next_color;
+				wq->first_flusher = NULL;
+				goto out_unlock;
+			}
+		} else {
+			/* wait in queue */
+			BUG_ON(wq->flush_color == this_flusher.flush_color);
+			list_add_tail(&this_flusher.list, &wq->flusher_queue);
+			flush_workqueue_prep_cwqs(wq, -1, wq->work_color);
+		}
+	} else {
+		/*
+		 * Oops, color space is full, wait on overflow queue.
+		 * The next flush completion will assign us
+		 * flush_color and transfer to flusher_queue.
+		 */
+		list_add_tail(&this_flusher.list, &wq->flusher_overflow);
+	}
+
+	mutex_unlock(&wq->flush_mutex);
+
+	wait_for_completion(&this_flusher.done);
+
+	/*
+	 * Wake-up-and-cascade phase
+	 *
+	 * First flushers are responsible for cascading flushes and
+	 * handling overflow.  Non-first flushers can simply return.
+	 */
+	if (wq->first_flusher != &this_flusher)
+		return;
+
+	mutex_lock(&wq->flush_mutex);
+
+	/* we might have raced, check again with mutex held */
+	if (wq->first_flusher != &this_flusher)
+		goto out_unlock;
+
+	wq->first_flusher = NULL;
+
+	BUG_ON(!list_empty(&this_flusher.list));
+	BUG_ON(wq->flush_color != this_flusher.flush_color);
+
+	while (true) {
+		struct wq_flusher *next, *tmp;
+
+		/* complete all the flushers sharing the current flush color */
+		list_for_each_entry_safe(next, tmp, &wq->flusher_queue, list) {
+			if (next->flush_color != wq->flush_color)
+				break;
+			list_del_init(&next->list);
+			complete(&next->done);
+		}
+
+		BUG_ON(!list_empty(&wq->flusher_overflow) &&
+		       wq->flush_color != work_next_color(wq->work_color));
+
+		/* this flush_color is finished, advance by one */
+		wq->flush_color = work_next_color(wq->flush_color);
+
+		/* one color has been freed, handle overflow queue */
+		if (!list_empty(&wq->flusher_overflow)) {
+			/*
+			 * Assign the same color to all overflowed
+			 * flushers, advance work_color and append to
+			 * flusher_queue.  This is the start-to-wait
+			 * phase for these overflowed flushers.
+			 */
+			list_for_each_entry(tmp, &wq->flusher_overflow, list)
+				tmp->flush_color = wq->work_color;
+
+			wq->work_color = work_next_color(wq->work_color);
+
+			list_splice_tail_init(&wq->flusher_overflow,
+					      &wq->flusher_queue);
+			flush_workqueue_prep_cwqs(wq, -1, wq->work_color);
+		}
+
+		if (list_empty(&wq->flusher_queue)) {
+			BUG_ON(wq->flush_color != wq->work_color);
+			break;
+		}
+
+		/*
+		 * Need to flush more colors.  Make the next flusher
+		 * the new first flusher and arm cwqs.
+		 */
+		BUG_ON(wq->flush_color == wq->work_color);
+		BUG_ON(wq->flush_color != next->flush_color);
+
+		list_del_init(&next->list);
+		wq->first_flusher = next;
+
+		if (flush_workqueue_prep_cwqs(wq, wq->flush_color, -1))
+			break;
+
+		/*
+		 * Meh... this color is already done, clear first
+		 * flusher and repeat cascading.
+		 */
+		wq->first_flusher = NULL;
+	}
+
+out_unlock:
+	mutex_unlock(&wq->flush_mutex);
 }
 EXPORT_SYMBOL_GPL(flush_workqueue);
 
@@ -547,43 +2304,46 @@ EXPORT_SYMBOL_GPL(flush_workqueue);
  */
 int flush_work(struct work_struct *work)
 {
+	struct worker *worker = NULL;
+	struct global_cwq *gcwq;
 	struct cpu_workqueue_struct *cwq;
-	struct list_head *prev;
 	struct wq_barrier barr;
 
 	might_sleep();
-	cwq = get_wq_data(work);
-	if (!cwq)
+	gcwq = get_work_gcwq(work);
+	if (!gcwq)
 		return 0;
 
-	lock_map_acquire(&cwq->wq->lockdep_map);
-	lock_map_release(&cwq->wq->lockdep_map);
-
-	prev = NULL;
-	spin_lock_irq(&cwq->lock);
+	spin_lock_irq(&gcwq->lock);
 	if (!list_empty(&work->entry)) {
 		/*
 		 * See the comment near try_to_grab_pending()->smp_rmb().
-		 * If it was re-queued under us we are not going to wait.
+		 * If it was re-queued to a different gcwq under us, we
+		 * are not going to wait.
 		 */
 		smp_rmb();
-		if (unlikely(cwq != get_wq_data(work)))
-			goto out;
-		prev = &work->entry;
+		cwq = get_work_cwq(work);
+		if (unlikely(!cwq || gcwq != cwq->gcwq))
+			goto already_gone;
 	} else {
-		if (cwq->current_work != work)
-			goto out;
-		prev = &cwq->worklist;
+		worker = find_worker_executing_work(gcwq, work);
+		if (!worker)
+			goto already_gone;
+		cwq = worker->current_cwq;
 	}
-	insert_wq_barrier(cwq, &barr, prev->next);
-out:
-	spin_unlock_irq(&cwq->lock);
-	if (!prev)
-		return 0;
+
+	insert_wq_barrier(cwq, &barr, work, worker);
+	spin_unlock_irq(&gcwq->lock);
+
+	lock_map_acquire(&cwq->wq->lockdep_map);
+	lock_map_release(&cwq->wq->lockdep_map);
 
 	wait_for_completion(&barr.done);
 	destroy_work_on_stack(&barr.work);
 	return 1;
+already_gone:
+	spin_unlock_irq(&gcwq->lock);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(flush_work);
 
@@ -593,54 +2353,55 @@ EXPORT_SYMBOL_GPL(flush_work);
  */
 static int try_to_grab_pending(struct work_struct *work)
 {
-	struct cpu_workqueue_struct *cwq;
+	struct global_cwq *gcwq;
 	int ret = -1;
 
-	if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work)))
+	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work)))
 		return 0;
 
 	/*
 	 * The queueing is in progress, or it is already queued. Try to
 	 * steal it from ->worklist without clearing WORK_STRUCT_PENDING.
 	 */
-
-	cwq = get_wq_data(work);
-	if (!cwq)
+	gcwq = get_work_gcwq(work);
+	if (!gcwq)
 		return ret;
 
-	spin_lock_irq(&cwq->lock);
+	spin_lock_irq(&gcwq->lock);
 	if (!list_empty(&work->entry)) {
 		/*
-		 * This work is queued, but perhaps we locked the wrong cwq.
+		 * This work is queued, but perhaps we locked the wrong gcwq.
 		 * In that case we must see the new value after rmb(), see
 		 * insert_work()->wmb().
 		 */
 		smp_rmb();
-		if (cwq == get_wq_data(work)) {
+		if (gcwq == get_work_gcwq(work)) {
 			debug_work_deactivate(work);
 			list_del_init(&work->entry);
+			cwq_dec_nr_in_flight(get_work_cwq(work),
+					     get_work_color(work));
 			ret = 1;
 		}
 	}
-	spin_unlock_irq(&cwq->lock);
+	spin_unlock_irq(&gcwq->lock);
 
 	return ret;
 }
 
-static void wait_on_cpu_work(struct cpu_workqueue_struct *cwq,
-				struct work_struct *work)
+static void wait_on_cpu_work(struct global_cwq *gcwq, struct work_struct *work)
 {
 	struct wq_barrier barr;
-	int running = 0;
+	struct worker *worker;
 
-	spin_lock_irq(&cwq->lock);
-	if (unlikely(cwq->current_work == work)) {
-		insert_wq_barrier(cwq, &barr, cwq->worklist.next);
-		running = 1;
-	}
-	spin_unlock_irq(&cwq->lock);
+	spin_lock_irq(&gcwq->lock);
+
+	worker = find_worker_executing_work(gcwq, work);
+	if (unlikely(worker))
+		insert_wq_barrier(worker->current_cwq, &barr, work, worker);
 
-	if (unlikely(running)) {
+	spin_unlock_irq(&gcwq->lock);
+
+	if (unlikely(worker)) {
 		wait_for_completion(&barr.done);
 		destroy_work_on_stack(&barr.work);
 	}
@@ -648,9 +2409,6 @@ static void wait_on_cpu_work(struct cpu_workqueue_struct *cwq,
 
 static void wait_on_work(struct work_struct *work)
 {
-	struct cpu_workqueue_struct *cwq;
-	struct workqueue_struct *wq;
-	const struct cpumask *cpu_map;
 	int cpu;
 
 	might_sleep();
@@ -658,15 +2416,8 @@ static void wait_on_work(struct work_struct *work)
 	lock_map_acquire(&work->lockdep_map);
 	lock_map_release(&work->lockdep_map);
 
-	cwq = get_wq_data(work);
-	if (!cwq)
-		return;
-
-	wq = cwq->wq;
-	cpu_map = wq_cpu_map(wq);
-
-	for_each_cpu(cpu, cpu_map)
-		wait_on_cpu_work(per_cpu_ptr(wq->cpu_wq, cpu), work);
+	for_each_gcwq_cpu(cpu)
+		wait_on_cpu_work(get_gcwq(cpu), work);
 }
 
 static int __cancel_work_timer(struct work_struct *work,
@@ -681,7 +2432,7 @@ static int __cancel_work_timer(struct work_struct *work,
 		wait_on_work(work);
 	} while (unlikely(ret < 0));
 
-	clear_wq_data(work);
+	clear_work_data(work);
 	return ret;
 }
 
@@ -727,8 +2478,6 @@ int cancel_delayed_work_sync(struct delayed_work *dwork)
 }
 EXPORT_SYMBOL(cancel_delayed_work_sync);
 
-static struct workqueue_struct *keventd_wq __read_mostly;
-
 /**
  * schedule_work - put work task in global workqueue
  * @work: job to be done
@@ -742,7 +2491,7 @@ static struct workqueue_struct *keventd_wq __read_mostly;
  */
 int schedule_work(struct work_struct *work)
 {
-	return queue_work(keventd_wq, work);
+	return queue_work(system_wq, work);
 }
 EXPORT_SYMBOL(schedule_work);
 
@@ -755,7 +2504,7 @@ EXPORT_SYMBOL(schedule_work);
  */
 int schedule_work_on(int cpu, struct work_struct *work)
 {
-	return queue_work_on(cpu, keventd_wq, work);
+	return queue_work_on(cpu, system_wq, work);
 }
 EXPORT_SYMBOL(schedule_work_on);
 
@@ -770,7 +2519,7 @@ EXPORT_SYMBOL(schedule_work_on);
 int schedule_delayed_work(struct delayed_work *dwork,
 					unsigned long delay)
 {
-	return queue_delayed_work(keventd_wq, dwork, delay);
+	return queue_delayed_work(system_wq, dwork, delay);
 }
 EXPORT_SYMBOL(schedule_delayed_work);
 
@@ -783,9 +2532,8 @@ EXPORT_SYMBOL(schedule_delayed_work);
 void flush_delayed_work(struct delayed_work *dwork)
 {
 	if (del_timer_sync(&dwork->timer)) {
-		struct cpu_workqueue_struct *cwq;
-		cwq = wq_per_cpu(get_wq_data(&dwork->work)->wq, get_cpu());
-		__queue_work(cwq, &dwork->work);
+		__queue_work(get_cpu(), get_work_cwq(&dwork->work)->wq,
+			     &dwork->work);
 		put_cpu();
 	}
 	flush_work(&dwork->work);
@@ -804,7 +2552,7 @@ EXPORT_SYMBOL(flush_delayed_work);
 int schedule_delayed_work_on(int cpu,
 			struct delayed_work *dwork, unsigned long delay)
 {
-	return queue_delayed_work_on(cpu, keventd_wq, dwork, delay);
+	return queue_delayed_work_on(cpu, system_wq, dwork, delay);
 }
 EXPORT_SYMBOL(schedule_delayed_work_on);
 
@@ -820,8 +2568,7 @@ EXPORT_SYMBOL(schedule_delayed_work_on);
 int schedule_on_each_cpu(work_func_t func)
 {
 	int cpu;
-	int orig = -1;
-	struct work_struct *works;
+	struct work_struct __percpu *works;
 
 	works = alloc_percpu(struct work_struct);
 	if (!works)
@@ -829,23 +2576,12 @@ int schedule_on_each_cpu(work_func_t func)
 
 	get_online_cpus();
 
-	/*
-	 * When running in keventd don't schedule a work item on
-	 * itself.  Can just call directly because the work queue is
-	 * already bound.  This also is faster.
-	 */
-	if (current_is_keventd())
-		orig = raw_smp_processor_id();
-
 	for_each_online_cpu(cpu) {
 		struct work_struct *work = per_cpu_ptr(works, cpu);
 
 		INIT_WORK(work, func);
-		if (cpu != orig)
-			schedule_work_on(cpu, work);
+		schedule_work_on(cpu, work);
 	}
-	if (orig >= 0)
-		func(per_cpu_ptr(works, orig));
 
 	for_each_online_cpu(cpu)
 		flush_work(per_cpu_ptr(works, cpu));
@@ -881,7 +2617,7 @@ int schedule_on_each_cpu(work_func_t func)
  */
 void flush_scheduled_work(void)
 {
-	flush_workqueue(keventd_wq);
+	flush_workqueue(system_wq);
 }
 EXPORT_SYMBOL(flush_scheduled_work);
 
@@ -913,170 +2649,170 @@ EXPORT_SYMBOL_GPL(execute_in_process_context);
 
 int keventd_up(void)
 {
-	return keventd_wq != NULL;
+	return system_wq != NULL;
 }
 
-int current_is_keventd(void)
+static int alloc_cwqs(struct workqueue_struct *wq)
 {
-	struct cpu_workqueue_struct *cwq;
-	int cpu = raw_smp_processor_id(); /* preempt-safe: keventd is per-cpu */
-	int ret = 0;
-
-	BUG_ON(!keventd_wq);
+	/*
+	 * cwqs are forced aligned according to WORK_STRUCT_FLAG_BITS.
+	 * Make sure that the alignment isn't lower than that of
+	 * unsigned long long.
+	 */
+	const size_t size = sizeof(struct cpu_workqueue_struct);
+	const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
+				   __alignof__(unsigned long long));
+#ifdef CONFIG_SMP
+	bool percpu = !(wq->flags & WQ_UNBOUND);
+#else
+	bool percpu = false;
+#endif
 
-	cwq = per_cpu_ptr(keventd_wq->cpu_wq, cpu);
-	if (current == cwq->thread)
-		ret = 1;
+	if (percpu)
+		wq->cpu_wq.pcpu = __alloc_percpu(size, align);
+	else {
+		void *ptr;
 
-	return ret;
+		/*
+		 * Allocate enough room to align cwq and put an extra
+		 * pointer at the end pointing back to the originally
+		 * allocated pointer which will be used for free.
+		 */
+		ptr = kzalloc(size + align + sizeof(void *), GFP_KERNEL);
+		if (ptr) {
+			wq->cpu_wq.single = PTR_ALIGN(ptr, align);
+			*(void **)(wq->cpu_wq.single + 1) = ptr;
+		}
+	}
 
+	/* just in case, make sure it's actually aligned */
+	BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
+	return wq->cpu_wq.v ? 0 : -ENOMEM;
 }
 
-static struct cpu_workqueue_struct *
-init_cpu_workqueue(struct workqueue_struct *wq, int cpu)
+static void free_cwqs(struct workqueue_struct *wq)
 {
-	struct cpu_workqueue_struct *cwq = per_cpu_ptr(wq->cpu_wq, cpu);
-
-	cwq->wq = wq;
-	spin_lock_init(&cwq->lock);
-	INIT_LIST_HEAD(&cwq->worklist);
-	init_waitqueue_head(&cwq->more_work);
+#ifdef CONFIG_SMP
+	bool percpu = !(wq->flags & WQ_UNBOUND);
+#else
+	bool percpu = false;
+#endif
 
-	return cwq;
+	if (percpu)
+		free_percpu(wq->cpu_wq.pcpu);
+	else if (wq->cpu_wq.single) {
+		/* the pointer to free is stored right after the cwq */
+		kfree(*(void **)(wq->cpu_wq.single + 1));
+	}
 }
 
-static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu)
+static int wq_clamp_max_active(int max_active, unsigned int flags,
+			       const char *name)
 {
-	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
-	struct workqueue_struct *wq = cwq->wq;
-	const char *fmt = is_wq_single_threaded(wq) ? "%s" : "%s/%d";
-	struct task_struct *p;
+	int lim = flags & WQ_UNBOUND ? WQ_UNBOUND_MAX_ACTIVE : WQ_MAX_ACTIVE;
 
-	p = kthread_create(worker_thread, cwq, fmt, wq->name, cpu);
-	/*
-	 * Nobody can add the work_struct to this cwq,
-	 *	if (caller is __create_workqueue)
-	 *		nobody should see this wq
-	 *	else // caller is CPU_UP_PREPARE
-	 *		cpu is not on cpu_online_map
-	 * so we can abort safely.
-	 */
-	if (IS_ERR(p))
-		return PTR_ERR(p);
-	if (cwq->wq->rt)
-		sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
-	cwq->thread = p;
+	if (max_active < 1 || max_active > lim)
+		printk(KERN_WARNING "workqueue: max_active %d requested for %s "
+		       "is out of range, clamping between %d and %d\n",
+		       max_active, name, 1, lim);
 
-	trace_workqueue_creation(cwq->thread, cpu);
-
-	return 0;
+	return clamp_val(max_active, 1, lim);
 }
 
-static void start_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu)
+struct workqueue_struct *__alloc_workqueue_key(const char *name,
+					       unsigned int flags,
+					       int max_active,
+					       struct lock_class_key *key,
+					       const char *lock_name)
 {
-	struct task_struct *p = cwq->thread;
+	struct workqueue_struct *wq;
+	unsigned int cpu;
 
-	if (p != NULL) {
-		if (cpu >= 0)
-			kthread_bind(p, cpu);
-		wake_up_process(p);
-	}
-}
+	/*
+	 * Unbound workqueues aren't concurrency managed and should be
+	 * dispatched to workers immediately.
+	 */
+	if (flags & WQ_UNBOUND)
+		flags |= WQ_HIGHPRI;
 
-struct workqueue_struct *__create_workqueue_key(const char *name,
-						int singlethread,
-						int freezeable,
-						int rt,
-						struct lock_class_key *key,
-						const char *lock_name)
-{
-	struct workqueue_struct *wq;
-	struct cpu_workqueue_struct *cwq;
-	int err = 0, cpu;
+	max_active = max_active ?: WQ_DFL_ACTIVE;
+	max_active = wq_clamp_max_active(max_active, flags, name);
 
 	wq = kzalloc(sizeof(*wq), GFP_KERNEL);
 	if (!wq)
-		return NULL;
+		goto err;
 
-	wq->cpu_wq = alloc_percpu(struct cpu_workqueue_struct);
-	if (!wq->cpu_wq) {
-		kfree(wq);
-		return NULL;
-	}
+	wq->flags = flags;
+	wq->saved_max_active = max_active;
+	mutex_init(&wq->flush_mutex);
+	atomic_set(&wq->nr_cwqs_to_flush, 0);
+	INIT_LIST_HEAD(&wq->flusher_queue);
+	INIT_LIST_HEAD(&wq->flusher_overflow);
 
 	wq->name = name;
 	lockdep_init_map(&wq->lockdep_map, lock_name, key, 0);
-	wq->singlethread = singlethread;
-	wq->freezeable = freezeable;
-	wq->rt = rt;
 	INIT_LIST_HEAD(&wq->list);
 
-	if (singlethread) {
-		cwq = init_cpu_workqueue(wq, singlethread_cpu);
-		err = create_workqueue_thread(cwq, singlethread_cpu);
-		start_workqueue_thread(cwq, -1);
-	} else {
-		cpu_maps_update_begin();
-		/*
-		 * We must place this wq on list even if the code below fails.
-		 * cpu_down(cpu) can remove cpu from cpu_populated_map before
-		 * destroy_workqueue() takes the lock, in that case we leak
-		 * cwq[cpu]->thread.
-		 */
-		spin_lock(&workqueue_lock);
-		list_add(&wq->list, &workqueues);
-		spin_unlock(&workqueue_lock);
-		/*
-		 * We must initialize cwqs for each possible cpu even if we
-		 * are going to call destroy_workqueue() finally. Otherwise
-		 * cpu_up() can hit the uninitialized cwq once we drop the
-		 * lock.
-		 */
-		for_each_possible_cpu(cpu) {
-			cwq = init_cpu_workqueue(wq, cpu);
-			if (err || !cpu_online(cpu))
-				continue;
-			err = create_workqueue_thread(cwq, cpu);
-			start_workqueue_thread(cwq, cpu);
-		}
-		cpu_maps_update_done();
+	if (alloc_cwqs(wq) < 0)
+		goto err;
+
+	for_each_cwq_cpu(cpu, wq) {
+		struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+		struct global_cwq *gcwq = get_gcwq(cpu);
+
+		BUG_ON((unsigned long)cwq & WORK_STRUCT_FLAG_MASK);
+		cwq->gcwq = gcwq;
+		cwq->wq = wq;
+		cwq->flush_color = -1;
+		cwq->max_active = max_active;
+		INIT_LIST_HEAD(&cwq->delayed_works);
 	}
 
-	if (err) {
-		destroy_workqueue(wq);
-		wq = NULL;
+	if (flags & WQ_RESCUER) {
+		struct worker *rescuer;
+
+		if (!alloc_mayday_mask(&wq->mayday_mask, GFP_KERNEL))
+			goto err;
+
+		wq->rescuer = rescuer = alloc_worker();
+		if (!rescuer)
+			goto err;
+
+		rescuer->task = kthread_create(rescuer_thread, wq, "%s", name);
+		if (IS_ERR(rescuer->task))
+			goto err;
+
+		wq->rescuer = rescuer;
+		rescuer->task->flags |= PF_THREAD_BOUND;
+		wake_up_process(rescuer->task);
 	}
-	return wq;
-}
-EXPORT_SYMBOL_GPL(__create_workqueue_key);
 
-static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
-{
 	/*
-	 * Our caller is either destroy_workqueue() or CPU_POST_DEAD,
-	 * cpu_add_remove_lock protects cwq->thread.
+	 * workqueue_lock protects global freeze state and workqueues
+	 * list.  Grab it, set max_active accordingly and add the new
+	 * workqueue to workqueues list.
 	 */
-	if (cwq->thread == NULL)
-		return;
+	spin_lock(&workqueue_lock);
 
-	lock_map_acquire(&cwq->wq->lockdep_map);
-	lock_map_release(&cwq->wq->lockdep_map);
+	if (workqueue_freezing && wq->flags & WQ_FREEZEABLE)
+		for_each_cwq_cpu(cpu, wq)
+			get_cwq(cpu, wq)->max_active = 0;
 
-	flush_cpu_workqueue(cwq);
-	/*
-	 * If the caller is CPU_POST_DEAD and cwq->worklist was not empty,
-	 * a concurrent flush_workqueue() can insert a barrier after us.
-	 * However, in that case run_workqueue() won't return and check
-	 * kthread_should_stop() until it flushes all work_struct's.
-	 * When ->worklist becomes empty it is safe to exit because no
-	 * more work_structs can be queued on this cwq: flush_workqueue
-	 * checks list_empty(), and a "normal" queue_work() can't use
-	 * a dead CPU.
-	 */
-	trace_workqueue_destruction(cwq->thread);
-	kthread_stop(cwq->thread);
-	cwq->thread = NULL;
+	list_add(&wq->list, &workqueues);
+
+	spin_unlock(&workqueue_lock);
+
+	return wq;
+err:
+	if (wq) {
+		free_cwqs(wq);
+		free_mayday_mask(wq->mayday_mask);
+		kfree(wq->rescuer);
+		kfree(wq);
+	}
+	return NULL;
 }
+EXPORT_SYMBOL_GPL(__alloc_workqueue_key);
 
 /**
  * destroy_workqueue - safely terminate a workqueue
@@ -1086,72 +2822,516 @@ static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq)
  */
 void destroy_workqueue(struct workqueue_struct *wq)
 {
-	const struct cpumask *cpu_map = wq_cpu_map(wq);
-	int cpu;
+	unsigned int cpu;
 
-	cpu_maps_update_begin();
+	flush_workqueue(wq);
+
+	/*
+	 * wq list is used to freeze wq, remove from list after
+	 * flushing is complete in case freeze races us.
+	 */
 	spin_lock(&workqueue_lock);
 	list_del(&wq->list);
 	spin_unlock(&workqueue_lock);
 
-	for_each_cpu(cpu, cpu_map)
-		cleanup_workqueue_thread(per_cpu_ptr(wq->cpu_wq, cpu));
- 	cpu_maps_update_done();
+	/* sanity check */
+	for_each_cwq_cpu(cpu, wq) {
+		struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+		int i;
+
+		for (i = 0; i < WORK_NR_COLORS; i++)
+			BUG_ON(cwq->nr_in_flight[i]);
+		BUG_ON(cwq->nr_active);
+		BUG_ON(!list_empty(&cwq->delayed_works));
+	}
+
+	if (wq->flags & WQ_RESCUER) {
+		kthread_stop(wq->rescuer->task);
+		free_mayday_mask(wq->mayday_mask);
+	}
 
-	free_percpu(wq->cpu_wq);
+	free_cwqs(wq);
 	kfree(wq);
 }
 EXPORT_SYMBOL_GPL(destroy_workqueue);
 
+/**
+ * workqueue_set_max_active - adjust max_active of a workqueue
+ * @wq: target workqueue
+ * @max_active: new max_active value.
+ *
+ * Set max_active of @wq to @max_active.
+ *
+ * CONTEXT:
+ * Don't call from IRQ context.
+ */
+void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
+{
+	unsigned int cpu;
+
+	max_active = wq_clamp_max_active(max_active, wq->flags, wq->name);
+
+	spin_lock(&workqueue_lock);
+
+	wq->saved_max_active = max_active;
+
+	for_each_cwq_cpu(cpu, wq) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+
+		spin_lock_irq(&gcwq->lock);
+
+		if (!(wq->flags & WQ_FREEZEABLE) ||
+		    !(gcwq->flags & GCWQ_FREEZING))
+			get_cwq(gcwq->cpu, wq)->max_active = max_active;
+
+		spin_unlock_irq(&gcwq->lock);
+	}
+
+	spin_unlock(&workqueue_lock);
+}
+EXPORT_SYMBOL_GPL(workqueue_set_max_active);
+
+/**
+ * workqueue_congested - test whether a workqueue is congested
+ * @cpu: CPU in question
+ * @wq: target workqueue
+ *
+ * Test whether @wq's cpu workqueue for @cpu is congested.  There is
+ * no synchronization around this function and the test result is
+ * unreliable and only useful as advisory hints or for debugging.
+ *
+ * RETURNS:
+ * %true if congested, %false otherwise.
+ */
+bool workqueue_congested(unsigned int cpu, struct workqueue_struct *wq)
+{
+	struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+
+	return !list_empty(&cwq->delayed_works);
+}
+EXPORT_SYMBOL_GPL(workqueue_congested);
+
+/**
+ * work_cpu - return the last known associated cpu for @work
+ * @work: the work of interest
+ *
+ * RETURNS:
+ * CPU number if @work was ever queued.  WORK_CPU_NONE otherwise.
+ */
+unsigned int work_cpu(struct work_struct *work)
+{
+	struct global_cwq *gcwq = get_work_gcwq(work);
+
+	return gcwq ? gcwq->cpu : WORK_CPU_NONE;
+}
+EXPORT_SYMBOL_GPL(work_cpu);
+
+/**
+ * work_busy - test whether a work is currently pending or running
+ * @work: the work to be tested
+ *
+ * Test whether @work is currently pending or running.  There is no
+ * synchronization around this function and the test result is
+ * unreliable and only useful as advisory hints or for debugging.
+ * Especially for reentrant wqs, the pending state might hide the
+ * running state.
+ *
+ * RETURNS:
+ * OR'd bitmask of WORK_BUSY_* bits.
+ */
+unsigned int work_busy(struct work_struct *work)
+{
+	struct global_cwq *gcwq = get_work_gcwq(work);
+	unsigned long flags;
+	unsigned int ret = 0;
+
+	if (!gcwq)
+		return false;
+
+	spin_lock_irqsave(&gcwq->lock, flags);
+
+	if (work_pending(work))
+		ret |= WORK_BUSY_PENDING;
+	if (find_worker_executing_work(gcwq, work))
+		ret |= WORK_BUSY_RUNNING;
+
+	spin_unlock_irqrestore(&gcwq->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(work_busy);
+
+/*
+ * CPU hotplug.
+ *
+ * There are two challenges in supporting CPU hotplug.  Firstly, there
+ * are a lot of assumptions on strong associations among work, cwq and
+ * gcwq which make migrating pending and scheduled works very
+ * difficult to implement without impacting hot paths.  Secondly,
+ * gcwqs serve mix of short, long and very long running works making
+ * blocked draining impractical.
+ *
+ * This is solved by allowing a gcwq to be detached from CPU, running
+ * it with unbound (rogue) workers and allowing it to be reattached
+ * later if the cpu comes back online.  A separate thread is created
+ * to govern a gcwq in such state and is called the trustee of the
+ * gcwq.
+ *
+ * Trustee states and their descriptions.
+ *
+ * START	Command state used on startup.  On CPU_DOWN_PREPARE, a
+ *		new trustee is started with this state.
+ *
+ * IN_CHARGE	Once started, trustee will enter this state after
+ *		assuming the manager role and making all existing
+ *		workers rogue.  DOWN_PREPARE waits for trustee to
+ *		enter this state.  After reaching IN_CHARGE, trustee
+ *		tries to execute the pending worklist until it's empty
+ *		and the state is set to BUTCHER, or the state is set
+ *		to RELEASE.
+ *
+ * BUTCHER	Command state which is set by the cpu callback after
+ *		the cpu has went down.  Once this state is set trustee
+ *		knows that there will be no new works on the worklist
+ *		and once the worklist is empty it can proceed to
+ *		killing idle workers.
+ *
+ * RELEASE	Command state which is set by the cpu callback if the
+ *		cpu down has been canceled or it has come online
+ *		again.  After recognizing this state, trustee stops
+ *		trying to drain or butcher and clears ROGUE, rebinds
+ *		all remaining workers back to the cpu and releases
+ *		manager role.
+ *
+ * DONE		Trustee will enter this state after BUTCHER or RELEASE
+ *		is complete.
+ *
+ *          trustee                 CPU                draining
+ *         took over                down               complete
+ * START -----------> IN_CHARGE -----------> BUTCHER -----------> DONE
+ *                        |                     |                  ^
+ *                        | CPU is back online  v   return workers |
+ *                         ----------------> RELEASE --------------
+ */
+
+/**
+ * trustee_wait_event_timeout - timed event wait for trustee
+ * @cond: condition to wait for
+ * @timeout: timeout in jiffies
+ *
+ * wait_event_timeout() for trustee to use.  Handles locking and
+ * checks for RELEASE request.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  To be used by trustee.
+ *
+ * RETURNS:
+ * Positive indicating left time if @cond is satisfied, 0 if timed
+ * out, -1 if canceled.
+ */
+#define trustee_wait_event_timeout(cond, timeout) ({			\
+	long __ret = (timeout);						\
+	while (!((cond) || (gcwq->trustee_state == TRUSTEE_RELEASE)) &&	\
+	       __ret) {							\
+		spin_unlock_irq(&gcwq->lock);				\
+		__wait_event_timeout(gcwq->trustee_wait, (cond) ||	\
+			(gcwq->trustee_state == TRUSTEE_RELEASE),	\
+			__ret);						\
+		spin_lock_irq(&gcwq->lock);				\
+	}								\
+	gcwq->trustee_state == TRUSTEE_RELEASE ? -1 : (__ret);		\
+})
+
+/**
+ * trustee_wait_event - event wait for trustee
+ * @cond: condition to wait for
+ *
+ * wait_event() for trustee to use.  Automatically handles locking and
+ * checks for CANCEL request.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  To be used by trustee.
+ *
+ * RETURNS:
+ * 0 if @cond is satisfied, -1 if canceled.
+ */
+#define trustee_wait_event(cond) ({					\
+	long __ret1;							\
+	__ret1 = trustee_wait_event_timeout(cond, MAX_SCHEDULE_TIMEOUT);\
+	__ret1 < 0 ? -1 : 0;						\
+})
+
+static int __cpuinit trustee_thread(void *__gcwq)
+{
+	struct global_cwq *gcwq = __gcwq;
+	struct worker *worker;
+	struct work_struct *work;
+	struct hlist_node *pos;
+	long rc;
+	int i;
+
+	BUG_ON(gcwq->cpu != smp_processor_id());
+
+	spin_lock_irq(&gcwq->lock);
+	/*
+	 * Claim the manager position and make all workers rogue.
+	 * Trustee must be bound to the target cpu and can't be
+	 * cancelled.
+	 */
+	BUG_ON(gcwq->cpu != smp_processor_id());
+	rc = trustee_wait_event(!(gcwq->flags & GCWQ_MANAGING_WORKERS));
+	BUG_ON(rc < 0);
+
+	gcwq->flags |= GCWQ_MANAGING_WORKERS;
+
+	list_for_each_entry(worker, &gcwq->idle_list, entry)
+		worker->flags |= WORKER_ROGUE;
+
+	for_each_busy_worker(worker, i, pos, gcwq)
+		worker->flags |= WORKER_ROGUE;
+
+	/*
+	 * Call schedule() so that we cross rq->lock and thus can
+	 * guarantee sched callbacks see the rogue flag.  This is
+	 * necessary as scheduler callbacks may be invoked from other
+	 * cpus.
+	 */
+	spin_unlock_irq(&gcwq->lock);
+	schedule();
+	spin_lock_irq(&gcwq->lock);
+
+	/*
+	 * Sched callbacks are disabled now.  Zap nr_running.  After
+	 * this, nr_running stays zero and need_more_worker() and
+	 * keep_working() are always true as long as the worklist is
+	 * not empty.
+	 */
+	atomic_set(get_gcwq_nr_running(gcwq->cpu), 0);
+
+	spin_unlock_irq(&gcwq->lock);
+	del_timer_sync(&gcwq->idle_timer);
+	spin_lock_irq(&gcwq->lock);
+
+	/*
+	 * We're now in charge.  Notify and proceed to drain.  We need
+	 * to keep the gcwq running during the whole CPU down
+	 * procedure as other cpu hotunplug callbacks may need to
+	 * flush currently running tasks.
+	 */
+	gcwq->trustee_state = TRUSTEE_IN_CHARGE;
+	wake_up_all(&gcwq->trustee_wait);
+
+	/*
+	 * The original cpu is in the process of dying and may go away
+	 * anytime now.  When that happens, we and all workers would
+	 * be migrated to other cpus.  Try draining any left work.  We
+	 * want to get it over with ASAP - spam rescuers, wake up as
+	 * many idlers as necessary and create new ones till the
+	 * worklist is empty.  Note that if the gcwq is frozen, there
+	 * may be frozen works in freezeable cwqs.  Don't declare
+	 * completion while frozen.
+	 */
+	while (gcwq->nr_workers != gcwq->nr_idle ||
+	       gcwq->flags & GCWQ_FREEZING ||
+	       gcwq->trustee_state == TRUSTEE_IN_CHARGE) {
+		int nr_works = 0;
+
+		list_for_each_entry(work, &gcwq->worklist, entry) {
+			send_mayday(work);
+			nr_works++;
+		}
+
+		list_for_each_entry(worker, &gcwq->idle_list, entry) {
+			if (!nr_works--)
+				break;
+			wake_up_process(worker->task);
+		}
+
+		if (need_to_create_worker(gcwq)) {
+			spin_unlock_irq(&gcwq->lock);
+			worker = create_worker(gcwq, false);
+			spin_lock_irq(&gcwq->lock);
+			if (worker) {
+				worker->flags |= WORKER_ROGUE;
+				start_worker(worker);
+			}
+		}
+
+		/* give a breather */
+		if (trustee_wait_event_timeout(false, TRUSTEE_COOLDOWN) < 0)
+			break;
+	}
+
+	/*
+	 * Either all works have been scheduled and cpu is down, or
+	 * cpu down has already been canceled.  Wait for and butcher
+	 * all workers till we're canceled.
+	 */
+	do {
+		rc = trustee_wait_event(!list_empty(&gcwq->idle_list));
+		while (!list_empty(&gcwq->idle_list))
+			destroy_worker(list_first_entry(&gcwq->idle_list,
+							struct worker, entry));
+	} while (gcwq->nr_workers && rc >= 0);
+
+	/*
+	 * At this point, either draining has completed and no worker
+	 * is left, or cpu down has been canceled or the cpu is being
+	 * brought back up.  There shouldn't be any idle one left.
+	 * Tell the remaining busy ones to rebind once it finishes the
+	 * currently scheduled works by scheduling the rebind_work.
+	 */
+	WARN_ON(!list_empty(&gcwq->idle_list));
+
+	for_each_busy_worker(worker, i, pos, gcwq) {
+		struct work_struct *rebind_work = &worker->rebind_work;
+
+		/*
+		 * Rebind_work may race with future cpu hotplug
+		 * operations.  Use a separate flag to mark that
+		 * rebinding is scheduled.
+		 */
+		worker->flags |= WORKER_REBIND;
+		worker->flags &= ~WORKER_ROGUE;
+
+		/* queue rebind_work, wq doesn't matter, use the default one */
+		if (test_and_set_bit(WORK_STRUCT_PENDING_BIT,
+				     work_data_bits(rebind_work)))
+			continue;
+
+		debug_work_activate(rebind_work);
+		insert_work(get_cwq(gcwq->cpu, system_wq), rebind_work,
+			    worker->scheduled.next,
+			    work_color_to_flags(WORK_NO_COLOR));
+	}
+
+	/* relinquish manager role */
+	gcwq->flags &= ~GCWQ_MANAGING_WORKERS;
+
+	/* notify completion */
+	gcwq->trustee = NULL;
+	gcwq->trustee_state = TRUSTEE_DONE;
+	wake_up_all(&gcwq->trustee_wait);
+	spin_unlock_irq(&gcwq->lock);
+	return 0;
+}
+
+/**
+ * wait_trustee_state - wait for trustee to enter the specified state
+ * @gcwq: gcwq the trustee of interest belongs to
+ * @state: target state to wait for
+ *
+ * Wait for the trustee to reach @state.  DONE is already matched.
+ *
+ * CONTEXT:
+ * spin_lock_irq(gcwq->lock) which may be released and regrabbed
+ * multiple times.  To be used by cpu_callback.
+ */
+static void __cpuinit wait_trustee_state(struct global_cwq *gcwq, int state)
+{
+	if (!(gcwq->trustee_state == state ||
+	      gcwq->trustee_state == TRUSTEE_DONE)) {
+		spin_unlock_irq(&gcwq->lock);
+		__wait_event(gcwq->trustee_wait,
+			     gcwq->trustee_state == state ||
+			     gcwq->trustee_state == TRUSTEE_DONE);
+		spin_lock_irq(&gcwq->lock);
+	}
+}
+
 static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
 						unsigned long action,
 						void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	struct cpu_workqueue_struct *cwq;
-	struct workqueue_struct *wq;
-	int err = 0;
+	struct global_cwq *gcwq = get_gcwq(cpu);
+	struct task_struct *new_trustee = NULL;
+	struct worker *uninitialized_var(new_worker);
+	unsigned long flags;
 
 	action &= ~CPU_TASKS_FROZEN;
 
 	switch (action) {
+	case CPU_DOWN_PREPARE:
+		new_trustee = kthread_create(trustee_thread, gcwq,
+					     "workqueue_trustee/%d\n", cpu);
+		if (IS_ERR(new_trustee))
+			return notifier_from_errno(PTR_ERR(new_trustee));
+		kthread_bind(new_trustee, cpu);
+		/* fall through */
 	case CPU_UP_PREPARE:
-		cpumask_set_cpu(cpu, cpu_populated_map);
-	}
-undo:
-	list_for_each_entry(wq, &workqueues, list) {
-		cwq = per_cpu_ptr(wq->cpu_wq, cpu);
-
-		switch (action) {
-		case CPU_UP_PREPARE:
-			err = create_workqueue_thread(cwq, cpu);
-			if (!err)
-				break;
-			printk(KERN_ERR "workqueue [%s] for %i failed\n",
-				wq->name, cpu);
-			action = CPU_UP_CANCELED;
-			err = -ENOMEM;
-			goto undo;
-
-		case CPU_ONLINE:
-			start_workqueue_thread(cwq, cpu);
-			break;
-
-		case CPU_UP_CANCELED:
-			start_workqueue_thread(cwq, -1);
-		case CPU_POST_DEAD:
-			cleanup_workqueue_thread(cwq);
-			break;
+		BUG_ON(gcwq->first_idle);
+		new_worker = create_worker(gcwq, false);
+		if (!new_worker) {
+			if (new_trustee)
+				kthread_stop(new_trustee);
+			return NOTIFY_BAD;
 		}
 	}
 
+	/* some are called w/ irq disabled, don't disturb irq status */
+	spin_lock_irqsave(&gcwq->lock, flags);
+
 	switch (action) {
-	case CPU_UP_CANCELED:
+	case CPU_DOWN_PREPARE:
+		/* initialize trustee and tell it to acquire the gcwq */
+		BUG_ON(gcwq->trustee || gcwq->trustee_state != TRUSTEE_DONE);
+		gcwq->trustee = new_trustee;
+		gcwq->trustee_state = TRUSTEE_START;
+		wake_up_process(gcwq->trustee);
+		wait_trustee_state(gcwq, TRUSTEE_IN_CHARGE);
+		/* fall through */
+	case CPU_UP_PREPARE:
+		BUG_ON(gcwq->first_idle);
+		gcwq->first_idle = new_worker;
+		break;
+
+	case CPU_DYING:
+		/*
+		 * Before this, the trustee and all workers except for
+		 * the ones which are still executing works from
+		 * before the last CPU down must be on the cpu.  After
+		 * this, they'll all be diasporas.
+		 */
+		gcwq->flags |= GCWQ_DISASSOCIATED;
+		break;
+
 	case CPU_POST_DEAD:
-		cpumask_clear_cpu(cpu, cpu_populated_map);
+		gcwq->trustee_state = TRUSTEE_BUTCHER;
+		/* fall through */
+	case CPU_UP_CANCELED:
+		destroy_worker(gcwq->first_idle);
+		gcwq->first_idle = NULL;
+		break;
+
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		gcwq->flags &= ~GCWQ_DISASSOCIATED;
+		if (gcwq->trustee_state != TRUSTEE_DONE) {
+			gcwq->trustee_state = TRUSTEE_RELEASE;
+			wake_up_process(gcwq->trustee);
+			wait_trustee_state(gcwq, TRUSTEE_DONE);
+		}
+
+		/*
+		 * Trustee is done and there might be no worker left.
+		 * Put the first_idle in and request a real manager to
+		 * take a look.
+		 */
+		spin_unlock_irq(&gcwq->lock);
+		kthread_bind(gcwq->first_idle->task, cpu);
+		spin_lock_irq(&gcwq->lock);
+		gcwq->flags |= GCWQ_MANAGE_WORKERS;
+		start_worker(gcwq->first_idle);
+		gcwq->first_idle = NULL;
+		break;
 	}
 
-	return notifier_from_errno(err);
+	spin_unlock_irqrestore(&gcwq->lock, flags);
+
+	return notifier_from_errno(0);
 }
 
 #ifdef CONFIG_SMP
@@ -1201,14 +3381,199 @@ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
 EXPORT_SYMBOL_GPL(work_on_cpu);
 #endif /* CONFIG_SMP */
 
-void __init init_workqueues(void)
+#ifdef CONFIG_FREEZER
+
+/**
+ * freeze_workqueues_begin - begin freezing workqueues
+ *
+ * Start freezing workqueues.  After this function returns, all
+ * freezeable workqueues will queue new works to their frozen_works
+ * list instead of gcwq->worklist.
+ *
+ * CONTEXT:
+ * Grabs and releases workqueue_lock and gcwq->lock's.
+ */
+void freeze_workqueues_begin(void)
 {
-	alloc_cpumask_var(&cpu_populated_map, GFP_KERNEL);
+	unsigned int cpu;
 
-	cpumask_copy(cpu_populated_map, cpu_online_mask);
-	singlethread_cpu = cpumask_first(cpu_possible_mask);
-	cpu_singlethread_map = cpumask_of(singlethread_cpu);
-	hotcpu_notifier(workqueue_cpu_callback, 0);
-	keventd_wq = create_workqueue("events");
-	BUG_ON(!keventd_wq);
+	spin_lock(&workqueue_lock);
+
+	BUG_ON(workqueue_freezing);
+	workqueue_freezing = true;
+
+	for_each_gcwq_cpu(cpu) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+		struct workqueue_struct *wq;
+
+		spin_lock_irq(&gcwq->lock);
+
+		BUG_ON(gcwq->flags & GCWQ_FREEZING);
+		gcwq->flags |= GCWQ_FREEZING;
+
+		list_for_each_entry(wq, &workqueues, list) {
+			struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+
+			if (cwq && wq->flags & WQ_FREEZEABLE)
+				cwq->max_active = 0;
+		}
+
+		spin_unlock_irq(&gcwq->lock);
+	}
+
+	spin_unlock(&workqueue_lock);
+}
+
+/**
+ * freeze_workqueues_busy - are freezeable workqueues still busy?
+ *
+ * Check whether freezing is complete.  This function must be called
+ * between freeze_workqueues_begin() and thaw_workqueues().
+ *
+ * CONTEXT:
+ * Grabs and releases workqueue_lock.
+ *
+ * RETURNS:
+ * %true if some freezeable workqueues are still busy.  %false if
+ * freezing is complete.
+ */
+bool freeze_workqueues_busy(void)
+{
+	unsigned int cpu;
+	bool busy = false;
+
+	spin_lock(&workqueue_lock);
+
+	BUG_ON(!workqueue_freezing);
+
+	for_each_gcwq_cpu(cpu) {
+		struct workqueue_struct *wq;
+		/*
+		 * nr_active is monotonically decreasing.  It's safe
+		 * to peek without lock.
+		 */
+		list_for_each_entry(wq, &workqueues, list) {
+			struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+
+			if (!cwq || !(wq->flags & WQ_FREEZEABLE))
+				continue;
+
+			BUG_ON(cwq->nr_active < 0);
+			if (cwq->nr_active) {
+				busy = true;
+				goto out_unlock;
+			}
+		}
+	}
+out_unlock:
+	spin_unlock(&workqueue_lock);
+	return busy;
+}
+
+/**
+ * thaw_workqueues - thaw workqueues
+ *
+ * Thaw workqueues.  Normal queueing is restored and all collected
+ * frozen works are transferred to their respective gcwq worklists.
+ *
+ * CONTEXT:
+ * Grabs and releases workqueue_lock and gcwq->lock's.
+ */
+void thaw_workqueues(void)
+{
+	unsigned int cpu;
+
+	spin_lock(&workqueue_lock);
+
+	if (!workqueue_freezing)
+		goto out_unlock;
+
+	for_each_gcwq_cpu(cpu) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+		struct workqueue_struct *wq;
+
+		spin_lock_irq(&gcwq->lock);
+
+		BUG_ON(!(gcwq->flags & GCWQ_FREEZING));
+		gcwq->flags &= ~GCWQ_FREEZING;
+
+		list_for_each_entry(wq, &workqueues, list) {
+			struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+
+			if (!cwq || !(wq->flags & WQ_FREEZEABLE))
+				continue;
+
+			/* restore max_active and repopulate worklist */
+			cwq->max_active = wq->saved_max_active;
+
+			while (!list_empty(&cwq->delayed_works) &&
+			       cwq->nr_active < cwq->max_active)
+				cwq_activate_first_delayed(cwq);
+		}
+
+		wake_up_worker(gcwq);
+
+		spin_unlock_irq(&gcwq->lock);
+	}
+
+	workqueue_freezing = false;
+out_unlock:
+	spin_unlock(&workqueue_lock);
+}
+#endif /* CONFIG_FREEZER */
+
+static int __init init_workqueues(void)
+{
+	unsigned int cpu;
+	int i;
+
+	cpu_notifier(workqueue_cpu_callback, CPU_PRI_WORKQUEUE);
+
+	/* initialize gcwqs */
+	for_each_gcwq_cpu(cpu) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+
+		spin_lock_init(&gcwq->lock);
+		INIT_LIST_HEAD(&gcwq->worklist);
+		gcwq->cpu = cpu;
+		if (cpu == WORK_CPU_UNBOUND)
+			gcwq->flags |= GCWQ_DISASSOCIATED;
+
+		INIT_LIST_HEAD(&gcwq->idle_list);
+		for (i = 0; i < BUSY_WORKER_HASH_SIZE; i++)
+			INIT_HLIST_HEAD(&gcwq->busy_hash[i]);
+
+		init_timer_deferrable(&gcwq->idle_timer);
+		gcwq->idle_timer.function = idle_worker_timeout;
+		gcwq->idle_timer.data = (unsigned long)gcwq;
+
+		setup_timer(&gcwq->mayday_timer, gcwq_mayday_timeout,
+			    (unsigned long)gcwq);
+
+		ida_init(&gcwq->worker_ida);
+
+		gcwq->trustee_state = TRUSTEE_DONE;
+		init_waitqueue_head(&gcwq->trustee_wait);
+	}
+
+	/* create the initial worker */
+	for_each_online_gcwq_cpu(cpu) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+		struct worker *worker;
+
+		worker = create_worker(gcwq, true);
+		BUG_ON(!worker);
+		spin_lock_irq(&gcwq->lock);
+		start_worker(worker);
+		spin_unlock_irq(&gcwq->lock);
+	}
+
+	system_wq = alloc_workqueue("events", 0, 0);
+	system_long_wq = alloc_workqueue("events_long", 0, 0);
+	system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0);
+	system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND,
+					    WQ_UNBOUND_MAX_ACTIVE);
+	BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq);
+	return 0;
 }
+early_initcall(init_workqueues);
diff --git a/kernel/workqueue_sched.h b/kernel/workqueue_sched.h
new file mode 100644
index 00000000000..2d10fc98dc7
--- /dev/null
+++ b/kernel/workqueue_sched.h
@@ -0,0 +1,9 @@
+/*
+ * kernel/workqueue_sched.h
+ *
+ * Scheduler hooks for concurrency managed workqueue.  Only to be
+ * included from sched.c and workqueue.c.
+ */
+void wq_worker_waking_up(struct task_struct *task, unsigned int cpu);
+struct task_struct *wq_worker_sleeping(struct task_struct *task,
+				       unsigned int cpu);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index dfdc0347b05..79e0dff1cdc 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -76,7 +76,6 @@ config UNUSED_SYMBOLS
 
 config DEBUG_FS
 	bool "Debug Filesystem"
-	depends on SYSFS
 	help
 	  debugfs is a virtual file system that kernel developers use to put
 	  debugging files into.  Enable this option to be able to read and
@@ -152,28 +151,33 @@ config DEBUG_SHIRQ
 	  Drivers ought to be able to handle interrupts coming in at those
 	  points; some don't and need to be caught.
 
-config DETECT_SOFTLOCKUP
-	bool "Detect Soft Lockups"
+config LOCKUP_DETECTOR
+	bool "Detect Hard and Soft Lockups"
 	depends on DEBUG_KERNEL && !S390
-	default y
 	help
-	  Say Y here to enable the kernel to detect "soft lockups",
-	  which are bugs that cause the kernel to loop in kernel
+	  Say Y here to enable the kernel to act as a watchdog to detect
+	  hard and soft lockups.
+
+	  Softlockups are bugs that cause the kernel to loop in kernel
 	  mode for more than 60 seconds, without giving other tasks a
-	  chance to run.
+	  chance to run.  The current stack trace is displayed upon
+	  detection and the system will stay locked up.
 
-	  When a soft-lockup is detected, the kernel will print the
-	  current stack trace (which you should report), but the
-	  system will stay locked up. This feature has negligible
-	  overhead.
+	  Hardlockups are bugs that cause the CPU to loop in kernel mode
+	  for more than 60 seconds, without letting other interrupts have a
+	  chance to run.  The current stack trace is displayed upon detection
+	  and the system will stay locked up.
 
-	  (Note that "hard lockups" are separate type of bugs that
-	   can be detected via the NMI-watchdog, on platforms that
-	   support it.)
+	  The overhead should be minimal.  A periodic hrtimer runs to
+	  generate interrupts and kick the watchdog task every 10-12 seconds.
+	  An NMI is generated every 60 seconds or so to check for hardlockups.
+
+config HARDLOCKUP_DETECTOR
+	def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI
 
 config BOOTPARAM_SOFTLOCKUP_PANIC
 	bool "Panic (Reboot) On Soft Lockups"
-	depends on DETECT_SOFTLOCKUP
+	depends on LOCKUP_DETECTOR
 	help
 	  Say Y here to enable the kernel to panic on "soft lockups",
 	  which are bugs that cause the kernel to loop in kernel
@@ -190,7 +194,7 @@ config BOOTPARAM_SOFTLOCKUP_PANIC
 
 config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
 	int
-	depends on DETECT_SOFTLOCKUP
+	depends on LOCKUP_DETECTOR
 	range 0 1
 	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
 	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
@@ -307,6 +311,12 @@ config DEBUG_OBJECTS_WORK
 	  work queue routines to track the life time of work objects and
 	  validate the work operations.
 
+config DEBUG_OBJECTS_RCU_HEAD
+	bool "Debug RCU callbacks objects"
+	depends on DEBUG_OBJECTS && PREEMPT
+	help
+	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
+
 config DEBUG_OBJECTS_ENABLE_DEFAULT
 	int "debug_objects bootup default value (0-1)"
         range 0 1
@@ -528,7 +538,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390
+	select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390 && !MICROBLAZE
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -628,6 +638,19 @@ config DEBUG_INFO
 
 	  If unsure, say N.
 
+config DEBUG_INFO_REDUCED
+	bool "Reduce debugging information"
+	depends on DEBUG_INFO
+	help
+	  If you say Y here gcc is instructed to generate less debugging
+	  information for structure types. This means that tools that
+	  need full debugging information (like kgdb or systemtap) won't
+	  be happy. But if you merely need debugging information to
+	  resolve line numbers there is no loss. Advantage is that
+	  build directory object sizes shrink dramatically over a full
+	  DEBUG_INFO build and compile times are reduced too.
+	  Only works with newer gcc versions.
+
 config DEBUG_VM
 	bool "Debug VM"
 	depends on DEBUG_KERNEL
@@ -958,13 +981,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER if !PPC && !S390
+	select FRAME_POINTER if !PPC && !S390 && !MICROBLAZE
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS && !PPC && !S390
+	select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
diff --git a/lib/flex_array.c b/lib/flex_array.c
index 41b1804fa72..77a6fea7481 100644
--- a/lib/flex_array.c
+++ b/lib/flex_array.c
@@ -171,6 +171,8 @@ __fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
  * Note that this *copies* the contents of @src into
  * the array.  If you are trying to store an array of
  * pointers, make sure to pass in &ptr instead of ptr.
+ * You may instead wish to use the flex_array_put_ptr()
+ * helper function.
  *
  * Locking must be provided by the caller.
  */
@@ -265,7 +267,8 @@ int flex_array_prealloc(struct flex_array *fa, unsigned int start,
  *
  * Returns a pointer to the data at index @element_nr.  Note
  * that this is a copy of the data that was passed in.  If you
- * are using this to store pointers, you'll get back &ptr.
+ * are using this to store pointers, you'll get back &ptr.  You
+ * may instead wish to use the flex_array_get_ptr helper.
  *
  * Locking must be provided by the caller.
  */
@@ -286,6 +289,26 @@ void *flex_array_get(struct flex_array *fa, unsigned int element_nr)
 	return &part->elements[index_inside_part(fa, element_nr)];
 }
 
+/**
+ * flex_array_get_ptr - pull a ptr back out of the array
+ * @fa:		the flex array from which to extract data
+ * @element_nr:	index of the element to fetch from the array
+ *
+ * Returns the pointer placed in the flex array at element_nr using
+ * flex_array_put_ptr().  This function should not be called if the
+ * element in question was not set using the _put_ptr() helper.
+ */
+void *flex_array_get_ptr(struct flex_array *fa, unsigned int element_nr)
+{
+	void **tmp;
+
+	tmp = flex_array_get(fa, element_nr);
+	if (!tmp)
+		return NULL;
+
+	return *tmp;
+}
+
 static int part_is_free(struct flex_array_part *part)
 {
 	int i;
diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c
index c0251f4ad08..da053313ee5 100644
--- a/lib/iommu-helper.c
+++ b/lib/iommu-helper.c
@@ -38,12 +38,3 @@ again:
 	return -1;
 }
 EXPORT_SYMBOL(iommu_area_alloc);
-
-unsigned long iommu_num_pages(unsigned long addr, unsigned long len,
-			      unsigned long io_page_size)
-{
-	unsigned long size = (addr & (io_page_size - 1)) + len;
-
-	return DIV_ROUND_UP(size, io_page_size);
-}
-EXPORT_SYMBOL(iommu_num_pages);
diff --git a/lib/ioremap.c b/lib/ioremap.c
index 14c6078f17a..5730ecd3eb6 100644
--- a/lib/ioremap.c
+++ b/lib/ioremap.c
@@ -13,10 +13,10 @@
 #include <asm/pgtable.h>
 
 static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pte_t *pte;
-	unsigned long pfn;
+	u64 pfn;
 
 	pfn = phys_addr >> PAGE_SHIFT;
 	pte = pte_alloc_kernel(pmd, addr);
@@ -31,7 +31,7 @@ static int ioremap_pte_range(pmd_t *pmd, unsigned long addr,
 }
 
 static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -49,7 +49,7 @@ static inline int ioremap_pmd_range(pud_t *pud, unsigned long addr,
 }
 
 static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
-		unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pud_t *pud;
 	unsigned long next;
@@ -67,7 +67,7 @@ static inline int ioremap_pud_range(pgd_t *pgd, unsigned long addr,
 }
 
 int ioremap_page_range(unsigned long addr,
-		       unsigned long end, unsigned long phys_addr, pgprot_t prot)
+		       unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
 {
 	pgd_t *pgd;
 	unsigned long start;
diff --git a/lib/list_debug.c b/lib/list_debug.c
index 1a39f4e3ae1..344c710d16c 100644
--- a/lib/list_debug.c
+++ b/lib/list_debug.c
@@ -43,6 +43,12 @@ EXPORT_SYMBOL(__list_add);
  */
 void list_del(struct list_head *entry)
 {
+	WARN(entry->next == LIST_POISON1,
+		"list_del corruption, next is LIST_POISON1 (%p)\n",
+		LIST_POISON1);
+	WARN(entry->next != LIST_POISON1 && entry->prev == LIST_POISON2,
+		"list_del corruption, prev is LIST_POISON2 (%p)\n",
+		LIST_POISON2);
 	WARN(entry->prev->next != entry,
 		"list_del corruption. prev->next should be %p, "
 		"but was %p\n", entry, entry->prev->next);
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index aeaa6d73444..ec9048e74f4 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -137,6 +137,33 @@ static int __cpuinit percpu_counter_hotcpu_callback(struct notifier_block *nb,
 	return NOTIFY_OK;
 }
 
+/*
+ * Compare counter against given value.
+ * Return 1 if greater, 0 if equal and -1 if less
+ */
+int percpu_counter_compare(struct percpu_counter *fbc, s64 rhs)
+{
+	s64	count;
+
+	count = percpu_counter_read(fbc);
+	/* Check to see if rough count will be sufficient for comparison */
+	if (abs(count - rhs) > (percpu_counter_batch*num_online_cpus())) {
+		if (count > rhs)
+			return 1;
+		else
+			return -1;
+	}
+	/* Need to use precise count */
+	count = percpu_counter_sum(fbc);
+	if (count > rhs)
+		return 1;
+	else if (count < rhs)
+		return -1;
+	else
+		return 0;
+}
+EXPORT_SYMBOL(percpu_counter_compare);
+
 static int __init percpu_counter_startup(void)
 {
 	compute_batch_value();
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 05da38bcc29..e907858498a 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -609,6 +609,100 @@ int radix_tree_tag_get(struct radix_tree_root *root,
 EXPORT_SYMBOL(radix_tree_tag_get);
 
 /**
+ * radix_tree_range_tag_if_tagged - for each item in given range set given
+ *				   tag if item has another tag set
+ * @root:		radix tree root
+ * @first_indexp:	pointer to a starting index of a range to scan
+ * @last_index:		last index of a range to scan
+ * @nr_to_tag:		maximum number items to tag
+ * @iftag:		tag index to test
+ * @settag:		tag index to set if tested tag is set
+ *
+ * This function scans range of radix tree from first_index to last_index
+ * (inclusive).  For each item in the range if iftag is set, the function sets
+ * also settag. The function stops either after tagging nr_to_tag items or
+ * after reaching last_index.
+ *
+ * The function returns number of leaves where the tag was set and sets
+ * *first_indexp to the first unscanned index.
+ */
+unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
+		unsigned long *first_indexp, unsigned long last_index,
+		unsigned long nr_to_tag,
+		unsigned int iftag, unsigned int settag)
+{
+	unsigned int height = root->height, shift;
+	unsigned long tagged = 0, index = *first_indexp;
+	struct radix_tree_node *open_slots[height], *slot;
+
+	last_index = min(last_index, radix_tree_maxindex(height));
+	if (index > last_index)
+		return 0;
+	if (!nr_to_tag)
+		return 0;
+	if (!root_tag_get(root, iftag)) {
+		*first_indexp = last_index + 1;
+		return 0;
+	}
+	if (height == 0) {
+		*first_indexp = last_index + 1;
+		root_tag_set(root, settag);
+		return 1;
+	}
+
+	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
+	slot = radix_tree_indirect_to_ptr(root->rnode);
+
+	for (;;) {
+		int offset;
+
+		offset = (index >> shift) & RADIX_TREE_MAP_MASK;
+		if (!slot->slots[offset])
+			goto next;
+		if (!tag_get(slot, iftag, offset))
+			goto next;
+		tag_set(slot, settag, offset);
+		if (height == 1) {
+			tagged++;
+			goto next;
+		}
+		/* Go down one level */
+		height--;
+		shift -= RADIX_TREE_MAP_SHIFT;
+		open_slots[height] = slot;
+		slot = slot->slots[offset];
+		continue;
+next:
+		/* Go to next item at level determined by 'shift' */
+		index = ((index >> shift) + 1) << shift;
+		if (index > last_index)
+			break;
+		if (tagged >= nr_to_tag)
+			break;
+		while (((index >> shift) & RADIX_TREE_MAP_MASK) == 0) {
+			/*
+			 * We've fully scanned this node. Go up. Because
+			 * last_index is guaranteed to be in the tree, what
+			 * we do below cannot wander astray.
+			 */
+			slot = open_slots[height];
+			height++;
+			shift += RADIX_TREE_MAP_SHIFT;
+		}
+	}
+	/*
+	 * The iftag must have been set somewhere because otherwise
+	 * we would return immediated at the beginning of the function
+	 */
+	root_tag_set(root, settag);
+	*first_indexp = index;
+
+	return tagged;
+}
+EXPORT_SYMBOL(radix_tree_range_tag_if_tagged);
+
+
+/**
  *	radix_tree_next_hole    -    find the next hole (not-present entry)
  *	@root:		tree root
  *	@index:		index key
diff --git a/lib/rwsem.c b/lib/rwsem.c
index ceba8e28807..f236d7cd5cf 100644
--- a/lib/rwsem.c
+++ b/lib/rwsem.c
@@ -36,45 +36,56 @@ struct rwsem_waiter {
 #define RWSEM_WAITING_FOR_WRITE	0x00000002
 };
 
+/* Wake types for __rwsem_do_wake().  Note that RWSEM_WAKE_NO_ACTIVE and
+ * RWSEM_WAKE_READ_OWNED imply that the spinlock must have been kept held
+ * since the rwsem value was observed.
+ */
+#define RWSEM_WAKE_ANY        0 /* Wake whatever's at head of wait list */
+#define RWSEM_WAKE_NO_ACTIVE  1 /* rwsem was observed with no active thread */
+#define RWSEM_WAKE_READ_OWNED 2 /* rwsem was observed to be read owned */
+
 /*
  * handle the lock release when processes blocked on it that can now run
  * - if we come here from up_xxxx(), then:
  *   - the 'active part' of count (&0x0000ffff) reached 0 (but may have changed)
  *   - the 'waiting part' of count (&0xffff0000) is -ve (and will still be so)
- *   - there must be someone on the queue
+ * - there must be someone on the queue
  * - the spinlock must be held by the caller
  * - woken process blocks are discarded from the list after having task zeroed
  * - writers are only woken if downgrading is false
  */
-static inline struct rw_semaphore *
-__rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
+static struct rw_semaphore *
+__rwsem_do_wake(struct rw_semaphore *sem, int wake_type)
 {
 	struct rwsem_waiter *waiter;
 	struct task_struct *tsk;
 	struct list_head *next;
-	signed long oldcount, woken, loop;
-
-	if (downgrading)
-		goto dont_wake_writers;
-
-	/* if we came through an up_xxxx() call, we only only wake someone up
-	 * if we can transition the active part of the count from 0 -> 1
-	 */
- try_again:
-	oldcount = rwsem_atomic_update(RWSEM_ACTIVE_BIAS, sem)
-						- RWSEM_ACTIVE_BIAS;
-	if (oldcount & RWSEM_ACTIVE_MASK)
-		goto undo;
+	signed long oldcount, woken, loop, adjustment;
 
 	waiter = list_entry(sem->wait_list.next, struct rwsem_waiter, list);
-
-	/* try to grant a single write lock if there's a writer at the front
-	 * of the queue - note we leave the 'active part' of the count
-	 * incremented by 1 and the waiting part incremented by 0x00010000
-	 */
 	if (!(waiter->flags & RWSEM_WAITING_FOR_WRITE))
 		goto readers_only;
 
+	if (wake_type == RWSEM_WAKE_READ_OWNED)
+		/* Another active reader was observed, so wakeup is not
+		 * likely to succeed. Save the atomic op.
+		 */
+		goto out;
+
+	/* There's a writer at the front of the queue - try to grant it the
+	 * write lock.  However, we only wake this writer if we can transition
+	 * the active part of the count from 0 -> 1
+	 */
+	adjustment = RWSEM_ACTIVE_WRITE_BIAS;
+	if (waiter->list.next == &sem->wait_list)
+		adjustment -= RWSEM_WAITING_BIAS;
+
+ try_again_write:
+	oldcount = rwsem_atomic_update(adjustment, sem) - adjustment;
+	if (oldcount & RWSEM_ACTIVE_MASK)
+		/* Someone grabbed the sem already */
+		goto undo_write;
+
 	/* We must be careful not to touch 'waiter' after we set ->task = NULL.
 	 * It is an allocated on the waiter's stack and may become invalid at
 	 * any time after that point (due to a wakeup from another source).
@@ -87,18 +98,30 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
 	put_task_struct(tsk);
 	goto out;
 
-	/* don't want to wake any writers */
- dont_wake_writers:
-	waiter = list_entry(sem->wait_list.next, struct rwsem_waiter, list);
-	if (waiter->flags & RWSEM_WAITING_FOR_WRITE)
+ readers_only:
+	/* If we come here from up_xxxx(), another thread might have reached
+	 * rwsem_down_failed_common() before we acquired the spinlock and
+	 * woken up a waiter, making it now active.  We prefer to check for
+	 * this first in order to not spend too much time with the spinlock
+	 * held if we're not going to be able to wake up readers in the end.
+	 *
+	 * Note that we do not need to update the rwsem count: any writer
+	 * trying to acquire rwsem will run rwsem_down_write_failed() due
+	 * to the waiting threads and block trying to acquire the spinlock.
+	 *
+	 * We use a dummy atomic update in order to acquire the cache line
+	 * exclusively since we expect to succeed and run the final rwsem
+	 * count adjustment pretty soon.
+	 */
+	if (wake_type == RWSEM_WAKE_ANY &&
+	    rwsem_atomic_update(0, sem) < RWSEM_WAITING_BIAS)
+		/* Someone grabbed the sem for write already */
 		goto out;
 
-	/* grant an infinite number of read locks to the readers at the front
-	 * of the queue
-	 * - note we increment the 'active part' of the count by the number of
-	 *   readers before waking any processes up
+	/* Grant an infinite number of read locks to the readers at the front
+	 * of the queue.  Note we increment the 'active part' of the count by
+	 * the number of readers before waking any processes up.
 	 */
- readers_only:
 	woken = 0;
 	do {
 		woken++;
@@ -111,16 +134,15 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
 
 	} while (waiter->flags & RWSEM_WAITING_FOR_READ);
 
-	loop = woken;
-	woken *= RWSEM_ACTIVE_BIAS - RWSEM_WAITING_BIAS;
-	if (!downgrading)
-		/* we'd already done one increment earlier */
-		woken -= RWSEM_ACTIVE_BIAS;
+	adjustment = woken * RWSEM_ACTIVE_READ_BIAS;
+	if (waiter->flags & RWSEM_WAITING_FOR_READ)
+		/* hit end of list above */
+		adjustment -= RWSEM_WAITING_BIAS;
 
-	rwsem_atomic_add(woken, sem);
+	rwsem_atomic_add(adjustment, sem);
 
 	next = sem->wait_list.next;
-	for (; loop > 0; loop--) {
+	for (loop = woken; loop > 0; loop--) {
 		waiter = list_entry(next, struct rwsem_waiter, list);
 		next = waiter->list.next;
 		tsk = waiter->task;
@@ -138,10 +160,10 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
 
 	/* undo the change to the active count, but check for a transition
 	 * 1->0 */
- undo:
-	if (rwsem_atomic_update(-RWSEM_ACTIVE_BIAS, sem) & RWSEM_ACTIVE_MASK)
+ undo_write:
+	if (rwsem_atomic_update(-adjustment, sem) & RWSEM_ACTIVE_MASK)
 		goto out;
-	goto try_again;
+	goto try_again_write;
 }
 
 /*
@@ -149,8 +171,9 @@ __rwsem_do_wake(struct rw_semaphore *sem, int downgrading)
  */
 static struct rw_semaphore __sched *
 rwsem_down_failed_common(struct rw_semaphore *sem,
-			struct rwsem_waiter *waiter, signed long adjustment)
+			 unsigned int flags, signed long adjustment)
 {
+	struct rwsem_waiter waiter;
 	struct task_struct *tsk = current;
 	signed long count;
 
@@ -158,23 +181,34 @@ rwsem_down_failed_common(struct rw_semaphore *sem,
 
 	/* set up my own style of waitqueue */
 	spin_lock_irq(&sem->wait_lock);
-	waiter->task = tsk;
+	waiter.task = tsk;
+	waiter.flags = flags;
 	get_task_struct(tsk);
 
-	list_add_tail(&waiter->list, &sem->wait_list);
+	if (list_empty(&sem->wait_list))
+		adjustment += RWSEM_WAITING_BIAS;
+	list_add_tail(&waiter.list, &sem->wait_list);
 
-	/* we're now waiting on the lock, but no longer actively read-locking */
+	/* we're now waiting on the lock, but no longer actively locking */
 	count = rwsem_atomic_update(adjustment, sem);
 
-	/* if there are no active locks, wake the front queued process(es) up */
-	if (!(count & RWSEM_ACTIVE_MASK))
-		sem = __rwsem_do_wake(sem, 0);
+	/* If there are no active locks, wake the front queued process(es) up.
+	 *
+	 * Alternatively, if we're called from a failed down_write(), there
+	 * were already threads queued before us and there are no active
+	 * writers, the lock must be read owned; so we try to wake any read
+	 * locks that were queued ahead of us. */
+	if (count == RWSEM_WAITING_BIAS)
+		sem = __rwsem_do_wake(sem, RWSEM_WAKE_NO_ACTIVE);
+	else if (count > RWSEM_WAITING_BIAS &&
+		 adjustment == -RWSEM_ACTIVE_WRITE_BIAS)
+		sem = __rwsem_do_wake(sem, RWSEM_WAKE_READ_OWNED);
 
 	spin_unlock_irq(&sem->wait_lock);
 
 	/* wait to be given the lock */
 	for (;;) {
-		if (!waiter->task)
+		if (!waiter.task)
 			break;
 		schedule();
 		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
@@ -191,12 +225,8 @@ rwsem_down_failed_common(struct rw_semaphore *sem,
 asmregparm struct rw_semaphore __sched *
 rwsem_down_read_failed(struct rw_semaphore *sem)
 {
-	struct rwsem_waiter waiter;
-
-	waiter.flags = RWSEM_WAITING_FOR_READ;
-	rwsem_down_failed_common(sem, &waiter,
-				RWSEM_WAITING_BIAS - RWSEM_ACTIVE_BIAS);
-	return sem;
+	return rwsem_down_failed_common(sem, RWSEM_WAITING_FOR_READ,
+					-RWSEM_ACTIVE_READ_BIAS);
 }
 
 /*
@@ -205,12 +235,8 @@ rwsem_down_read_failed(struct rw_semaphore *sem)
 asmregparm struct rw_semaphore __sched *
 rwsem_down_write_failed(struct rw_semaphore *sem)
 {
-	struct rwsem_waiter waiter;
-
-	waiter.flags = RWSEM_WAITING_FOR_WRITE;
-	rwsem_down_failed_common(sem, &waiter, -RWSEM_ACTIVE_BIAS);
-
-	return sem;
+	return rwsem_down_failed_common(sem, RWSEM_WAITING_FOR_WRITE,
+					-RWSEM_ACTIVE_WRITE_BIAS);
 }
 
 /*
@@ -225,7 +251,7 @@ asmregparm struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem)
 
 	/* do nothing if list empty */
 	if (!list_empty(&sem->wait_list))
-		sem = __rwsem_do_wake(sem, 0);
+		sem = __rwsem_do_wake(sem, RWSEM_WAKE_ANY);
 
 	spin_unlock_irqrestore(&sem->wait_lock, flags);
 
@@ -245,7 +271,7 @@ asmregparm struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem)
 
 	/* do nothing if list empty */
 	if (!list_empty(&sem->wait_list))
-		sem = __rwsem_do_wake(sem, 1);
+		sem = __rwsem_do_wake(sem, RWSEM_WAKE_READ_OWNED);
 
 	spin_unlock_irqrestore(&sem->wait_lock, flags);
 
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 4ee19d0d391..7af9d841c43 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -146,19 +146,16 @@ int strict_strtoul(const char *cp, unsigned int base, unsigned long *res)
 {
 	char *tail;
 	unsigned long val;
-	size_t len;
 
 	*res = 0;
-	len = strlen(cp);
-	if (len == 0)
+	if (!*cp)
 		return -EINVAL;
 
 	val = simple_strtoul(cp, &tail, base);
 	if (tail == cp)
 		return -EINVAL;
 
-	if ((*tail == '\0') ||
-		((len == (size_t)(tail - cp) + 1) && (*tail == '\n'))) {
+	if ((tail[0] == '\0') || (tail[0] == '\n' && tail[1] == '\0')) {
 		*res = val;
 		return 0;
 	}
@@ -220,18 +217,15 @@ int strict_strtoull(const char *cp, unsigned int base, unsigned long long *res)
 {
 	char *tail;
 	unsigned long long val;
-	size_t len;
 
 	*res = 0;
-	len = strlen(cp);
-	if (len == 0)
+	if (!*cp)
 		return -EINVAL;
 
 	val = simple_strtoull(cp, &tail, base);
 	if (tail == cp)
 		return -EINVAL;
-	if ((*tail == '\0') ||
-		((len == (size_t)(tail - cp) + 1) && (*tail == '\n'))) {
+	if ((tail[0] == '\0') || (tail[0] == '\n' && tail[1] == '\0')) {
 		*res = val;
 		return 0;
 	}
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 123bcef13e5..f9fd3dd3916 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -665,7 +665,6 @@ int bdi_init(struct backing_dev_info *bdi)
 	bdi->max_ratio = 100;
 	bdi->max_prop_frac = PROP_FRAC_BASE;
 	spin_lock_init(&bdi->wb_lock);
-	INIT_RCU_HEAD(&bdi->rcu_head);
 	INIT_LIST_HEAD(&bdi->bdi_list);
 	INIT_LIST_HEAD(&bdi->wb_list);
 	INIT_LIST_HEAD(&bdi->work_list);
diff --git a/mm/filemap.c b/mm/filemap.c
index 20e5642e9f9..3d4df44e422 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2238,14 +2238,12 @@ static ssize_t generic_perform_write(struct file *file,
 
 	do {
 		struct page *page;
-		pgoff_t index;		/* Pagecache index for current page */
 		unsigned long offset;	/* Offset into pagecache page */
 		unsigned long bytes;	/* Bytes to write to page */
 		size_t copied;		/* Bytes copied from user */
 		void *fsdata;
 
 		offset = (pos & (PAGE_CACHE_SIZE - 1));
-		index = pos >> PAGE_CACHE_SHIFT;
 		bytes = min_t(unsigned long, PAGE_CACHE_SIZE - offset,
 						iov_iter_count(i));
 
diff --git a/mm/highmem.c b/mm/highmem.c
index 66baa20f78f..7a0aa1be499 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -26,6 +26,7 @@
 #include <linux/init.h>
 #include <linux/hash.h>
 #include <linux/highmem.h>
+#include <linux/kgdb.h>
 #include <asm/tlbflush.h>
 
 /*
@@ -470,6 +471,12 @@ void debug_kmap_atomic(enum km_type type)
 			warn_count--;
 		}
 	}
+#ifdef CONFIG_KGDB_KDB
+	if (unlikely(type == KM_KDB && atomic_read(&kgdb_active) == -1)) {
+		WARN_ON(1);
+		warn_count--;
+	}
+#endif /* CONFIG_KGDB_KDB */
 }
 
 #endif
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 54d42b009db..b61d2db9f34 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2349,11 +2349,17 @@ retry_avoidcopy:
 	ptep = huge_pte_offset(mm, address & huge_page_mask(h));
 	if (likely(pte_same(huge_ptep_get(ptep), pte))) {
 		/* Break COW */
+		mmu_notifier_invalidate_range_start(mm,
+			address & huge_page_mask(h),
+			(address & huge_page_mask(h)) + huge_page_size(h));
 		huge_ptep_clear_flush(vma, address, ptep);
 		set_huge_pte_at(mm, address, ptep,
 				make_huge_pte(vma, new_page, 1));
 		/* Make the old page be freed below */
 		new_page = old_page;
+		mmu_notifier_invalidate_range_end(mm,
+			address & huge_page_mask(h),
+			(address & huge_page_mask(h)) + huge_page_size(h));
 	}
 	page_cache_release(new_page);
 	page_cache_release(old_page);
diff --git a/mm/init-mm.c b/mm/init-mm.c
index 57aba0da966..1d29cdfe8eb 100644
--- a/mm/init-mm.c
+++ b/mm/init-mm.c
@@ -7,6 +7,11 @@
 
 #include <asm/atomic.h>
 #include <asm/pgtable.h>
+#include <asm/mmu.h>
+
+#ifndef INIT_MM_CONTEXT
+#define INIT_MM_CONTEXT(name)
+#endif
 
 struct mm_struct init_mm = {
 	.mm_rb		= RB_ROOT,
@@ -17,4 +22,5 @@ struct mm_struct init_mm = {
 	.page_table_lock =  __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
 	.mmlist		= LIST_HEAD_INIT(init_mm.mmlist),
 	.cpu_vm_mask	= CPU_MASK_ALL,
+	INIT_MM_CONTEXT(init_mm)
 };
diff --git a/mm/ksm.c b/mm/ksm.c
index 6c3e99b4ae7..e2ae0045832 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -33,6 +33,7 @@
 #include <linux/mmu_notifier.h>
 #include <linux/swap.h>
 #include <linux/ksm.h>
+#include <linux/hash.h>
 
 #include <asm/tlbflush.h>
 #include "internal.h"
@@ -153,8 +154,9 @@ struct rmap_item {
 static struct rb_root root_stable_tree = RB_ROOT;
 static struct rb_root root_unstable_tree = RB_ROOT;
 
-#define MM_SLOTS_HASH_HEADS 1024
-static struct hlist_head *mm_slots_hash;
+#define MM_SLOTS_HASH_SHIFT 10
+#define MM_SLOTS_HASH_HEADS (1 << MM_SLOTS_HASH_SHIFT)
+static struct hlist_head mm_slots_hash[MM_SLOTS_HASH_HEADS];
 
 static struct mm_slot ksm_mm_head = {
 	.mm_list = LIST_HEAD_INIT(ksm_mm_head.mm_list),
@@ -269,28 +271,13 @@ static inline void free_mm_slot(struct mm_slot *mm_slot)
 	kmem_cache_free(mm_slot_cache, mm_slot);
 }
 
-static int __init mm_slots_hash_init(void)
-{
-	mm_slots_hash = kzalloc(MM_SLOTS_HASH_HEADS * sizeof(struct hlist_head),
-				GFP_KERNEL);
-	if (!mm_slots_hash)
-		return -ENOMEM;
-	return 0;
-}
-
-static void __init mm_slots_hash_free(void)
-{
-	kfree(mm_slots_hash);
-}
-
 static struct mm_slot *get_mm_slot(struct mm_struct *mm)
 {
 	struct mm_slot *mm_slot;
 	struct hlist_head *bucket;
 	struct hlist_node *node;
 
-	bucket = &mm_slots_hash[((unsigned long)mm / sizeof(struct mm_struct))
-				% MM_SLOTS_HASH_HEADS];
+	bucket = &mm_slots_hash[hash_ptr(mm, MM_SLOTS_HASH_SHIFT)];
 	hlist_for_each_entry(mm_slot, node, bucket, link) {
 		if (mm == mm_slot->mm)
 			return mm_slot;
@@ -303,8 +290,7 @@ static void insert_to_mm_slots_hash(struct mm_struct *mm,
 {
 	struct hlist_head *bucket;
 
-	bucket = &mm_slots_hash[((unsigned long)mm / sizeof(struct mm_struct))
-				% MM_SLOTS_HASH_HEADS];
+	bucket = &mm_slots_hash[hash_ptr(mm, MM_SLOTS_HASH_SHIFT)];
 	mm_slot->mm = mm;
 	hlist_add_head(&mm_slot->link, bucket);
 }
@@ -318,19 +304,14 @@ static void hold_anon_vma(struct rmap_item *rmap_item,
 			  struct anon_vma *anon_vma)
 {
 	rmap_item->anon_vma = anon_vma;
-	atomic_inc(&anon_vma->external_refcount);
+	get_anon_vma(anon_vma);
 }
 
-static void drop_anon_vma(struct rmap_item *rmap_item)
+static void ksm_drop_anon_vma(struct rmap_item *rmap_item)
 {
 	struct anon_vma *anon_vma = rmap_item->anon_vma;
 
-	if (atomic_dec_and_lock(&anon_vma->external_refcount, &anon_vma->lock)) {
-		int empty = list_empty(&anon_vma->head);
-		spin_unlock(&anon_vma->lock);
-		if (empty)
-			anon_vma_free(anon_vma);
-	}
+	drop_anon_vma(anon_vma);
 }
 
 /*
@@ -415,7 +396,7 @@ static void break_cow(struct rmap_item *rmap_item)
 	 * It is not an accident that whenever we want to break COW
 	 * to undo, we also need to drop a reference to the anon_vma.
 	 */
-	drop_anon_vma(rmap_item);
+	ksm_drop_anon_vma(rmap_item);
 
 	down_read(&mm->mmap_sem);
 	if (ksm_test_exit(mm))
@@ -470,7 +451,7 @@ static void remove_node_from_stable_tree(struct stable_node *stable_node)
 			ksm_pages_sharing--;
 		else
 			ksm_pages_shared--;
-		drop_anon_vma(rmap_item);
+		ksm_drop_anon_vma(rmap_item);
 		rmap_item->address &= PAGE_MASK;
 		cond_resched();
 	}
@@ -558,7 +539,7 @@ static void remove_rmap_item_from_tree(struct rmap_item *rmap_item)
 		else
 			ksm_pages_shared--;
 
-		drop_anon_vma(rmap_item);
+		ksm_drop_anon_vma(rmap_item);
 		rmap_item->address &= PAGE_MASK;
 
 	} else if (rmap_item->address & UNSTABLE_FLAG) {
@@ -1566,7 +1547,7 @@ again:
 		struct anon_vma_chain *vmac;
 		struct vm_area_struct *vma;
 
-		spin_lock(&anon_vma->lock);
+		anon_vma_lock(anon_vma);
 		list_for_each_entry(vmac, &anon_vma->head, same_anon_vma) {
 			vma = vmac->vma;
 			if (rmap_item->address < vma->vm_start ||
@@ -1589,7 +1570,7 @@ again:
 			if (!search_new_forks || !mapcount)
 				break;
 		}
-		spin_unlock(&anon_vma->lock);
+		anon_vma_unlock(anon_vma);
 		if (!mapcount)
 			goto out;
 	}
@@ -1619,7 +1600,7 @@ again:
 		struct anon_vma_chain *vmac;
 		struct vm_area_struct *vma;
 
-		spin_lock(&anon_vma->lock);
+		anon_vma_lock(anon_vma);
 		list_for_each_entry(vmac, &anon_vma->head, same_anon_vma) {
 			vma = vmac->vma;
 			if (rmap_item->address < vma->vm_start ||
@@ -1637,11 +1618,11 @@ again:
 			ret = try_to_unmap_one(page, vma,
 					rmap_item->address, flags);
 			if (ret != SWAP_AGAIN || !page_mapped(page)) {
-				spin_unlock(&anon_vma->lock);
+				anon_vma_unlock(anon_vma);
 				goto out;
 			}
 		}
-		spin_unlock(&anon_vma->lock);
+		anon_vma_unlock(anon_vma);
 	}
 	if (!search_new_forks++)
 		goto again;
@@ -1671,7 +1652,7 @@ again:
 		struct anon_vma_chain *vmac;
 		struct vm_area_struct *vma;
 
-		spin_lock(&anon_vma->lock);
+		anon_vma_lock(anon_vma);
 		list_for_each_entry(vmac, &anon_vma->head, same_anon_vma) {
 			vma = vmac->vma;
 			if (rmap_item->address < vma->vm_start ||
@@ -1688,11 +1669,11 @@ again:
 
 			ret = rmap_one(page, vma, rmap_item->address, arg);
 			if (ret != SWAP_AGAIN) {
-				spin_unlock(&anon_vma->lock);
+				anon_vma_unlock(anon_vma);
 				goto out;
 			}
 		}
-		spin_unlock(&anon_vma->lock);
+		anon_vma_unlock(anon_vma);
 	}
 	if (!search_new_forks++)
 		goto again;
@@ -1943,15 +1924,11 @@ static int __init ksm_init(void)
 	if (err)
 		goto out;
 
-	err = mm_slots_hash_init();
-	if (err)
-		goto out_free1;
-
 	ksm_thread = kthread_run(ksm_scan_thread, NULL, "ksmd");
 	if (IS_ERR(ksm_thread)) {
 		printk(KERN_ERR "ksm: creating kthread failed\n");
 		err = PTR_ERR(ksm_thread);
-		goto out_free2;
+		goto out_free;
 	}
 
 #ifdef CONFIG_SYSFS
@@ -1959,7 +1936,7 @@ static int __init ksm_init(void)
 	if (err) {
 		printk(KERN_ERR "ksm: register sysfs failed\n");
 		kthread_stop(ksm_thread);
-		goto out_free2;
+		goto out_free;
 	}
 #else
 	ksm_run = KSM_RUN_MERGE;	/* no way for user to start it */
@@ -1975,9 +1952,7 @@ static int __init ksm_init(void)
 #endif
 	return 0;
 
-out_free2:
-	mm_slots_hash_free();
-out_free1:
+out_free:
 	ksm_slab_free();
 out:
 	return err;
diff --git a/mm/memblock.c b/mm/memblock.c
index 3024eb30fc2..43840b305ec 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -504,7 +504,7 @@ int __init memblock_is_reserved(u64 addr)
 
 int memblock_is_region_reserved(u64 base, u64 size)
 {
-	return memblock_overlaps_region(&memblock.reserved, base, size);
+	return memblock_overlaps_region(&memblock.reserved, base, size) >= 0;
 }
 
 /*
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 20a8193a7af..0576e9e6458 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -51,6 +51,8 @@
 
 #include <asm/uaccess.h>
 
+#include <trace/events/vmscan.h>
+
 struct cgroup_subsys mem_cgroup_subsys __read_mostly;
 #define MEM_CGROUP_RECLAIM_RETRIES	5
 struct mem_cgroup *root_mem_cgroup __read_mostly;
@@ -211,8 +213,6 @@ struct mem_cgroup {
 	*/
 	spinlock_t reclaim_param_lock;
 
-	int	prev_priority;	/* for recording reclaim priority */
-
 	/*
 	 * While reclaiming in a hierarchy, we cache the last child we
 	 * reclaimed from.
@@ -858,35 +858,6 @@ int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem)
 	return ret;
 }
 
-/*
- * prev_priority control...this will be used in memory reclaim path.
- */
-int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem)
-{
-	int prev_priority;
-
-	spin_lock(&mem->reclaim_param_lock);
-	prev_priority = mem->prev_priority;
-	spin_unlock(&mem->reclaim_param_lock);
-
-	return prev_priority;
-}
-
-void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem, int priority)
-{
-	spin_lock(&mem->reclaim_param_lock);
-	if (priority < mem->prev_priority)
-		mem->prev_priority = priority;
-	spin_unlock(&mem->reclaim_param_lock);
-}
-
-void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem, int priority)
-{
-	spin_lock(&mem->reclaim_param_lock);
-	mem->prev_priority = priority;
-	spin_unlock(&mem->reclaim_param_lock);
-}
-
 static int calc_inactive_ratio(struct mem_cgroup *memcg, unsigned long *present_pages)
 {
 	unsigned long active;
@@ -1038,6 +1009,10 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
 	}
 
 	*scanned = scan;
+
+	trace_mm_vmscan_memcg_isolate(0, nr_to_scan, scan, nr_taken,
+				      0, 0, 0, mode);
+
 	return nr_taken;
 }
 
@@ -1158,6 +1133,24 @@ static int mem_cgroup_count_children(struct mem_cgroup *mem)
 }
 
 /*
+ * Return the memory (and swap, if configured) limit for a memcg.
+ */
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
+{
+	u64 limit;
+	u64 memsw;
+
+	limit = res_counter_read_u64(&memcg->res, RES_LIMIT) +
+			total_swap_pages;
+	memsw = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
+	/*
+	 * If memsw is finite and limits the amount of swap space available
+	 * to this memcg, return that limit.
+	 */
+	return min(limit, memsw);
+}
+
+/*
  * Visit the first child (need not be the first child as per the ordering
  * of the cgroup list, since we track last_scanned_child) of @mem and use
  * that to reclaim free pages from.
diff --git a/mm/memory.c b/mm/memory.c
index bde42c6d363..858829d06a9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -307,7 +307,6 @@ void free_pgd_range(struct mmu_gather *tlb,
 {
 	pgd_t *pgd;
 	unsigned long next;
-	unsigned long start;
 
 	/*
 	 * The next few lines have given us lots of grief...
@@ -351,7 +350,6 @@ void free_pgd_range(struct mmu_gather *tlb,
 	if (addr > end - 1)
 		return;
 
-	start = addr;
 	pgd = pgd_offset(tlb->mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
@@ -2008,11 +2006,10 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
 {
 	pgd_t *pgd;
 	unsigned long next;
-	unsigned long start = addr, end = addr + size;
+	unsigned long end = addr + size;
 	int err;
 
 	BUG_ON(addr >= end);
-	mmu_notifier_invalidate_range_start(mm, start, end);
 	pgd = pgd_offset(mm, addr);
 	do {
 		next = pgd_addr_end(addr, end);
@@ -2020,7 +2017,7 @@ int apply_to_page_range(struct mm_struct *mm, unsigned long addr,
 		if (err)
 			break;
 	} while (pgd++, addr = next, addr != end);
-	mmu_notifier_invalidate_range_end(mm, start, end);
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(apply_to_page_range);
@@ -2630,6 +2627,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	swp_entry_t entry;
 	pte_t pte;
 	struct mem_cgroup *ptr = NULL;
+	int exclusive = 0;
 	int ret = 0;
 
 	if (!pte_unmap_same(mm, pmd, page_table, orig_pte))
@@ -2724,10 +2722,12 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	if ((flags & FAULT_FLAG_WRITE) && reuse_swap_page(page)) {
 		pte = maybe_mkwrite(pte_mkdirty(pte), vma);
 		flags &= ~FAULT_FLAG_WRITE;
+		ret |= VM_FAULT_WRITE;
+		exclusive = 1;
 	}
 	flush_icache_page(vma, page);
 	set_pte_at(mm, address, page_table, pte);
-	page_add_anon_rmap(page, vma, address);
+	do_page_add_anon_rmap(page, vma, address, exclusive);
 	/* It's better to call commit-charge after rmap is established */
 	mem_cgroup_commit_charge_swapin(page, ptr);
 
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5bc0a96beb5..f969da5dd8a 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1275,33 +1275,42 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
 		const unsigned long __user *, new_nodes)
 {
 	const struct cred *cred = current_cred(), *tcred;
-	struct mm_struct *mm;
+	struct mm_struct *mm = NULL;
 	struct task_struct *task;
-	nodemask_t old;
-	nodemask_t new;
 	nodemask_t task_nodes;
 	int err;
+	nodemask_t *old;
+	nodemask_t *new;
+	NODEMASK_SCRATCH(scratch);
+
+	if (!scratch)
+		return -ENOMEM;
+
+	old = &scratch->mask1;
+	new = &scratch->mask2;
 
-	err = get_nodes(&old, old_nodes, maxnode);
+	err = get_nodes(old, old_nodes, maxnode);
 	if (err)
-		return err;
+		goto out;
 
-	err = get_nodes(&new, new_nodes, maxnode);
+	err = get_nodes(new, new_nodes, maxnode);
 	if (err)
-		return err;
+		goto out;
 
 	/* Find the mm_struct */
 	read_lock(&tasklist_lock);
 	task = pid ? find_task_by_vpid(pid) : current;
 	if (!task) {
 		read_unlock(&tasklist_lock);
-		return -ESRCH;
+		err = -ESRCH;
+		goto out;
 	}
 	mm = get_task_mm(task);
 	read_unlock(&tasklist_lock);
 
+	err = -EINVAL;
 	if (!mm)
-		return -EINVAL;
+		goto out;
 
 	/*
 	 * Check if this process has the right to modify the specified
@@ -1322,12 +1331,12 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
 
 	task_nodes = cpuset_mems_allowed(task);
 	/* Is the user allowed to access the target nodes? */
-	if (!nodes_subset(new, task_nodes) && !capable(CAP_SYS_NICE)) {
+	if (!nodes_subset(*new, task_nodes) && !capable(CAP_SYS_NICE)) {
 		err = -EPERM;
 		goto out;
 	}
 
-	if (!nodes_subset(new, node_states[N_HIGH_MEMORY])) {
+	if (!nodes_subset(*new, node_states[N_HIGH_MEMORY])) {
 		err = -EINVAL;
 		goto out;
 	}
@@ -1336,10 +1345,13 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
 	if (err)
 		goto out;
 
-	err = do_migrate_pages(mm, &old, &new,
+	err = do_migrate_pages(mm, old, new,
 		capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE);
 out:
-	mmput(mm);
+	if (mm)
+		mmput(mm);
+	NODEMASK_SCRATCH_FREE(scratch);
+
 	return err;
 }
 
@@ -1712,6 +1724,50 @@ bool init_nodemask_of_mempolicy(nodemask_t *mask)
 }
 #endif
 
+/*
+ * mempolicy_nodemask_intersects
+ *
+ * If tsk's mempolicy is "default" [NULL], return 'true' to indicate default
+ * policy.  Otherwise, check for intersection between mask and the policy
+ * nodemask for 'bind' or 'interleave' policy.  For 'perferred' or 'local'
+ * policy, always return true since it may allocate elsewhere on fallback.
+ *
+ * Takes task_lock(tsk) to prevent freeing of its mempolicy.
+ */
+bool mempolicy_nodemask_intersects(struct task_struct *tsk,
+					const nodemask_t *mask)
+{
+	struct mempolicy *mempolicy;
+	bool ret = true;
+
+	if (!mask)
+		return ret;
+	task_lock(tsk);
+	mempolicy = tsk->mempolicy;
+	if (!mempolicy)
+		goto out;
+
+	switch (mempolicy->mode) {
+	case MPOL_PREFERRED:
+		/*
+		 * MPOL_PREFERRED and MPOL_F_LOCAL are only preferred nodes to
+		 * allocate from, they may fallback to other nodes when oom.
+		 * Thus, it's possible for tsk to have allocated memory from
+		 * nodes in mask.
+		 */
+		break;
+	case MPOL_BIND:
+	case MPOL_INTERLEAVE:
+		ret = nodes_intersects(mempolicy->v.nodes, *mask);
+		break;
+	default:
+		BUG();
+	}
+out:
+	task_unlock(tsk);
+	return ret;
+}
+
 /* Allocate a page in interleaved policy.
    Own path because it needs to do special accounting. */
 static struct page *alloc_page_interleave(gfp_t gfp, unsigned order,
diff --git a/mm/migrate.c b/mm/migrate.c
index 4205b1d6049..38e7cad782f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -639,7 +639,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private,
 			 * exist when the page is remapped later
 			 */
 			anon_vma = page_anon_vma(page);
-			atomic_inc(&anon_vma->external_refcount);
+			get_anon_vma(anon_vma);
 		}
 	}
 
@@ -682,12 +682,8 @@ skip_unmap:
 rcu_unlock:
 
 	/* Drop an anon_vma reference if we took one */
-	if (anon_vma && atomic_dec_and_lock(&anon_vma->external_refcount, &anon_vma->lock)) {
-		int empty = list_empty(&anon_vma->head);
-		spin_unlock(&anon_vma->lock);
-		if (empty)
-			anon_vma_free(anon_vma);
-	}
+	if (anon_vma)
+		drop_anon_vma(anon_vma);
 
 	if (rcu_locked)
 		rcu_read_unlock();
diff --git a/mm/mmap.c b/mm/mmap.c
index 456ec6f2788..31003338b97 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -452,12 +452,10 @@ static void vma_link(struct mm_struct *mm, struct vm_area_struct *vma,
 		spin_lock(&mapping->i_mmap_lock);
 		vma->vm_truncate_count = mapping->truncate_count;
 	}
-	anon_vma_lock(vma);
 
 	__vma_link(mm, vma, prev, rb_link, rb_parent);
 	__vma_link_file(vma);
 
-	anon_vma_unlock(vma);
 	if (mapping)
 		spin_unlock(&mapping->i_mmap_lock);
 
@@ -506,6 +504,7 @@ int vma_adjust(struct vm_area_struct *vma, unsigned long start,
 	struct vm_area_struct *importer = NULL;
 	struct address_space *mapping = NULL;
 	struct prio_tree_root *root = NULL;
+	struct anon_vma *anon_vma = NULL;
 	struct file *file = vma->vm_file;
 	long adjust_next = 0;
 	int remove_next = 0;
@@ -578,6 +577,17 @@ again:			remove_next = 1 + (end > next->vm_end);
 		}
 	}
 
+	/*
+	 * When changing only vma->vm_end, we don't really need anon_vma
+	 * lock. This is a fairly rare case by itself, but the anon_vma
+	 * lock may be shared between many sibling processes.  Skipping
+	 * the lock for brk adjustments makes a difference sometimes.
+	 */
+	if (vma->anon_vma && (insert || importer || start != vma->vm_start)) {
+		anon_vma = vma->anon_vma;
+		anon_vma_lock(anon_vma);
+	}
+
 	if (root) {
 		flush_dcache_mmap_lock(mapping);
 		vma_prio_tree_remove(vma, root);
@@ -617,6 +627,8 @@ again:			remove_next = 1 + (end > next->vm_end);
 		__insert_vm_struct(mm, insert);
 	}
 
+	if (anon_vma)
+		anon_vma_unlock(anon_vma);
 	if (mapping)
 		spin_unlock(&mapping->i_mmap_lock);
 
@@ -1710,7 +1722,7 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 	 */
 	if (unlikely(anon_vma_prepare(vma)))
 		return -ENOMEM;
-	anon_vma_lock(vma);
+	vma_lock_anon_vma(vma);
 
 	/*
 	 * vma->vm_start/vm_end cannot change under us because the caller
@@ -1721,7 +1733,7 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 	if (address < PAGE_ALIGN(address+4))
 		address = PAGE_ALIGN(address+4);
 	else {
-		anon_vma_unlock(vma);
+		vma_unlock_anon_vma(vma);
 		return -ENOMEM;
 	}
 	error = 0;
@@ -1734,10 +1746,12 @@ int expand_upwards(struct vm_area_struct *vma, unsigned long address)
 		grow = (address - vma->vm_end) >> PAGE_SHIFT;
 
 		error = acct_stack_growth(vma, size, grow);
-		if (!error)
+		if (!error) {
 			vma->vm_end = address;
+			perf_event_mmap(vma);
+		}
 	}
-	anon_vma_unlock(vma);
+	vma_unlock_anon_vma(vma);
 	return error;
 }
 #endif /* CONFIG_STACK_GROWSUP || CONFIG_IA64 */
@@ -1762,7 +1776,7 @@ static int expand_downwards(struct vm_area_struct *vma,
 	if (error)
 		return error;
 
-	anon_vma_lock(vma);
+	vma_lock_anon_vma(vma);
 
 	/*
 	 * vma->vm_start/vm_end cannot change under us because the caller
@@ -1781,9 +1795,10 @@ static int expand_downwards(struct vm_area_struct *vma,
 		if (!error) {
 			vma->vm_start = address;
 			vma->vm_pgoff -= grow;
+			perf_event_mmap(vma);
 		}
 	}
-	anon_vma_unlock(vma);
+	vma_unlock_anon_vma(vma);
 	return error;
 }
 
@@ -2208,6 +2223,7 @@ unsigned long do_brk(unsigned long addr, unsigned long len)
 	vma->vm_page_prot = vm_get_page_prot(flags);
 	vma_link(mm, vma, prev, rb_link, rb_parent);
 out:
+	perf_event_mmap(vma);
 	mm->total_vm += len >> PAGE_SHIFT;
 	if (flags & VM_LOCKED) {
 		if (!mlock_vma_pages_range(vma, addr, addr + len))
@@ -2466,23 +2482,23 @@ static DEFINE_MUTEX(mm_all_locks_mutex);
 
 static void vm_lock_anon_vma(struct mm_struct *mm, struct anon_vma *anon_vma)
 {
-	if (!test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+	if (!test_bit(0, (unsigned long *) &anon_vma->root->head.next)) {
 		/*
 		 * The LSB of head.next can't change from under us
 		 * because we hold the mm_all_locks_mutex.
 		 */
-		spin_lock_nest_lock(&anon_vma->lock, &mm->mmap_sem);
+		spin_lock_nest_lock(&anon_vma->root->lock, &mm->mmap_sem);
 		/*
 		 * We can safely modify head.next after taking the
-		 * anon_vma->lock. If some other vma in this mm shares
+		 * anon_vma->root->lock. If some other vma in this mm shares
 		 * the same anon_vma we won't take it again.
 		 *
 		 * No need of atomic instructions here, head.next
 		 * can't change from under us thanks to the
-		 * anon_vma->lock.
+		 * anon_vma->root->lock.
 		 */
 		if (__test_and_set_bit(0, (unsigned long *)
-				       &anon_vma->head.next))
+				       &anon_vma->root->head.next))
 			BUG();
 	}
 }
@@ -2573,7 +2589,7 @@ out_unlock:
 
 static void vm_unlock_anon_vma(struct anon_vma *anon_vma)
 {
-	if (test_bit(0, (unsigned long *) &anon_vma->head.next)) {
+	if (test_bit(0, (unsigned long *) &anon_vma->root->head.next)) {
 		/*
 		 * The LSB of head.next can't change to 0 from under
 		 * us because we hold the mm_all_locks_mutex.
@@ -2584,12 +2600,12 @@ static void vm_unlock_anon_vma(struct anon_vma *anon_vma)
 		 *
 		 * No need of atomic instructions here, head.next
 		 * can't change from under us until we release the
-		 * anon_vma->lock.
+		 * anon_vma->root->lock.
 		 */
 		if (!__test_and_clear_bit(0, (unsigned long *)
-					  &anon_vma->head.next))
+					  &anon_vma->root->head.next))
 			BUG();
-		spin_unlock(&anon_vma->lock);
+		anon_vma_unlock(anon_vma);
 	}
 }
 
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 709aedfaa01..d3def05a33d 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -4,6 +4,8 @@
  *  Copyright (C)  1998,2000  Rik van Riel
  *	Thanks go out to Claus Fischer for some serious inspiration and
  *	for goading me into coding this file...
+ *  Copyright (C)  2010  Google, Inc.
+ *	Rewritten by David Rientjes
  *
  *  The routines in this file are used to kill a process when
  *  we're seriously out of memory. This gets called from __alloc_pages()
@@ -27,171 +29,188 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/memcontrol.h>
+#include <linux/mempolicy.h>
 #include <linux/security.h>
 
 int sysctl_panic_on_oom;
 int sysctl_oom_kill_allocating_task;
-int sysctl_oom_dump_tasks;
+int sysctl_oom_dump_tasks = 1;
 static DEFINE_SPINLOCK(zone_scan_lock);
-/* #define DEBUG */
+
+#ifdef CONFIG_NUMA
+/**
+ * has_intersects_mems_allowed() - check task eligiblity for kill
+ * @tsk: task struct of which task to consider
+ * @mask: nodemask passed to page allocator for mempolicy ooms
+ *
+ * Task eligibility is determined by whether or not a candidate task, @tsk,
+ * shares the same mempolicy nodes as current if it is bound by such a policy
+ * and whether or not it has the same set of allowed cpuset nodes.
+ */
+static bool has_intersects_mems_allowed(struct task_struct *tsk,
+					const nodemask_t *mask)
+{
+	struct task_struct *start = tsk;
+
+	do {
+		if (mask) {
+			/*
+			 * If this is a mempolicy constrained oom, tsk's
+			 * cpuset is irrelevant.  Only return true if its
+			 * mempolicy intersects current, otherwise it may be
+			 * needlessly killed.
+			 */
+			if (mempolicy_nodemask_intersects(tsk, mask))
+				return true;
+		} else {
+			/*
+			 * This is not a mempolicy constrained oom, so only
+			 * check the mems of tsk's cpuset.
+			 */
+			if (cpuset_mems_allowed_intersects(current, tsk))
+				return true;
+		}
+	} while_each_thread(start, tsk);
+
+	return false;
+}
+#else
+static bool has_intersects_mems_allowed(struct task_struct *tsk,
+					const nodemask_t *mask)
+{
+	return true;
+}
+#endif /* CONFIG_NUMA */
 
 /*
- * Is all threads of the target process nodes overlap ours?
+ * If this is a system OOM (not a memcg OOM) and the task selected to be
+ * killed is not already running at high (RT) priorities, speed up the
+ * recovery by boosting the dying task to the lowest FIFO priority.
+ * That helps with the recovery and avoids interfering with RT tasks.
  */
-static int has_intersects_mems_allowed(struct task_struct *tsk)
+static void boost_dying_task_prio(struct task_struct *p,
+				  struct mem_cgroup *mem)
 {
-	struct task_struct *t;
+	struct sched_param param = { .sched_priority = 1 };
+
+	if (mem)
+		return;
+
+	if (!rt_task(p))
+		sched_setscheduler_nocheck(p, SCHED_FIFO, &param);
+}
+
+/*
+ * The process p may have detached its own ->mm while exiting or through
+ * use_mm(), but one or more of its subthreads may still have a valid
+ * pointer.  Return p, or any of its subthreads with a valid ->mm, with
+ * task_lock() held.
+ */
+static struct task_struct *find_lock_task_mm(struct task_struct *p)
+{
+	struct task_struct *t = p;
 
-	t = tsk;
 	do {
-		if (cpuset_mems_allowed_intersects(current, t))
-			return 1;
-		t = next_thread(t);
-	} while (t != tsk);
+		task_lock(t);
+		if (likely(t->mm))
+			return t;
+		task_unlock(t);
+	} while_each_thread(p, t);
 
-	return 0;
+	return NULL;
+}
+
+/* return true if the task is not adequate as candidate victim task. */
+static bool oom_unkillable_task(struct task_struct *p, struct mem_cgroup *mem,
+			   const nodemask_t *nodemask)
+{
+	if (is_global_init(p))
+		return true;
+	if (p->flags & PF_KTHREAD)
+		return true;
+
+	/* When mem_cgroup_out_of_memory() and p is not member of the group */
+	if (mem && !task_in_mem_cgroup(p, mem))
+		return true;
+
+	/* p may not have freeable memory in nodemask */
+	if (!has_intersects_mems_allowed(p, nodemask))
+		return true;
+
+	return false;
 }
 
 /**
- * badness - calculate a numeric value for how bad this task has been
+ * oom_badness - heuristic function to determine which candidate task to kill
  * @p: task struct of which task we should calculate
- * @uptime: current uptime in seconds
- *
- * The formula used is relatively simple and documented inline in the
- * function. The main rationale is that we want to select a good task
- * to kill when we run out of memory.
+ * @totalpages: total present RAM allowed for page allocation
  *
- * Good in this context means that:
- * 1) we lose the minimum amount of work done
- * 2) we recover a large amount of memory
- * 3) we don't kill anything innocent of eating tons of memory
- * 4) we want to kill the minimum amount of processes (one)
- * 5) we try to kill the process the user expects us to kill, this
- *    algorithm has been meticulously tuned to meet the principle
- *    of least surprise ... (be careful when you change it)
+ * The heuristic for determining which task to kill is made to be as simple and
+ * predictable as possible.  The goal is to return the highest value for the
+ * task consuming the most memory to avoid subsequent oom failures.
  */
-
-unsigned long badness(struct task_struct *p, unsigned long uptime)
+unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
+		      const nodemask_t *nodemask, unsigned long totalpages)
 {
-	unsigned long points, cpu_time, run_time;
-	struct mm_struct *mm;
-	struct task_struct *child;
-	int oom_adj = p->signal->oom_adj;
-	struct task_cputime task_time;
-	unsigned long utime;
-	unsigned long stime;
+	int points;
 
-	if (oom_adj == OOM_DISABLE)
+	if (oom_unkillable_task(p, mem, nodemask))
 		return 0;
 
-	task_lock(p);
-	mm = p->mm;
-	if (!mm) {
-		task_unlock(p);
+	p = find_lock_task_mm(p);
+	if (!p)
 		return 0;
-	}
-
-	/*
-	 * The memory size of the process is the basis for the badness.
-	 */
-	points = mm->total_vm;
 
 	/*
-	 * After this unlock we can no longer dereference local variable `mm'
+	 * Shortcut check for OOM_SCORE_ADJ_MIN so the entire heuristic doesn't
+	 * need to be executed for something that cannot be killed.
 	 */
-	task_unlock(p);
-
-	/*
-	 * swapoff can easily use up all memory, so kill those first.
-	 */
-	if (p->flags & PF_OOM_ORIGIN)
-		return ULONG_MAX;
-
-	/*
-	 * Processes which fork a lot of child processes are likely
-	 * a good choice. We add half the vmsize of the children if they
-	 * have an own mm. This prevents forking servers to flood the
-	 * machine with an endless amount of children. In case a single
-	 * child is eating the vast majority of memory, adding only half
-	 * to the parents will make the child our kill candidate of choice.
-	 */
-	list_for_each_entry(child, &p->children, sibling) {
-		task_lock(child);
-		if (child->mm != mm && child->mm)
-			points += child->mm->total_vm/2 + 1;
-		task_unlock(child);
+	if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+		task_unlock(p);
+		return 0;
 	}
 
 	/*
-	 * CPU time is in tens of seconds and run time is in thousands
-         * of seconds. There is no particular reason for this other than
-         * that it turned out to work very well in practice.
-	 */
-	thread_group_cputime(p, &task_time);
-	utime = cputime_to_jiffies(task_time.utime);
-	stime = cputime_to_jiffies(task_time.stime);
-	cpu_time = (utime + stime) >> (SHIFT_HZ + 3);
-
-
-	if (uptime >= p->start_time.tv_sec)
-		run_time = (uptime - p->start_time.tv_sec) >> 10;
-	else
-		run_time = 0;
-
-	if (cpu_time)
-		points /= int_sqrt(cpu_time);
-	if (run_time)
-		points /= int_sqrt(int_sqrt(run_time));
-
-	/*
-	 * Niced processes are most likely less important, so double
-	 * their badness points.
+	 * When the PF_OOM_ORIGIN bit is set, it indicates the task should have
+	 * priority for oom killing.
 	 */
-	if (task_nice(p) > 0)
-		points *= 2;
+	if (p->flags & PF_OOM_ORIGIN) {
+		task_unlock(p);
+		return 1000;
+	}
 
 	/*
-	 * Superuser processes are usually more important, so we make it
-	 * less likely that we kill those.
+	 * The memory controller may have a limit of 0 bytes, so avoid a divide
+	 * by zero, if necessary.
 	 */
-	if (has_capability_noaudit(p, CAP_SYS_ADMIN) ||
-	    has_capability_noaudit(p, CAP_SYS_RESOURCE))
-		points /= 4;
+	if (!totalpages)
+		totalpages = 1;
 
 	/*
-	 * We don't want to kill a process with direct hardware access.
-	 * Not only could that mess up the hardware, but usually users
-	 * tend to only have this flag set on applications they think
-	 * of as important.
+	 * The baseline for the badness score is the proportion of RAM that each
+	 * task's rss and swap space use.
 	 */
-	if (has_capability_noaudit(p, CAP_SYS_RAWIO))
-		points /= 4;
+	points = (get_mm_rss(p->mm) + get_mm_counter(p->mm, MM_SWAPENTS)) * 1000 /
+			totalpages;
+	task_unlock(p);
 
 	/*
-	 * If p's nodes don't overlap ours, it may still help to kill p
-	 * because p may have allocated or otherwise mapped memory on
-	 * this node before. However it will be less likely.
+	 * Root processes get 3% bonus, just like the __vm_enough_memory()
+	 * implementation used by LSMs.
 	 */
-	if (!has_intersects_mems_allowed(p))
-		points /= 8;
+	if (has_capability_noaudit(p, CAP_SYS_ADMIN))
+		points -= 30;
 
 	/*
-	 * Adjust the score by oom_adj.
+	 * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
+	 * either completely disable oom killing or always prefer a certain
+	 * task.
 	 */
-	if (oom_adj) {
-		if (oom_adj > 0) {
-			if (!points)
-				points = 1;
-			points <<= oom_adj;
-		} else
-			points >>= -(oom_adj);
-	}
+	points += p->signal->oom_score_adj;
 
-#ifdef DEBUG
-	printk(KERN_DEBUG "OOMkill: task %d (%s) got %lu points\n",
-	p->pid, p->comm, points);
-#endif
-	return points;
+	if (points < 0)
+		return 0;
+	return (points < 1000) ? points : 1000;
 }
 
 /*
@@ -199,12 +218,20 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
  */
 #ifdef CONFIG_NUMA
 static enum oom_constraint constrained_alloc(struct zonelist *zonelist,
-				    gfp_t gfp_mask, nodemask_t *nodemask)
+				gfp_t gfp_mask, nodemask_t *nodemask,
+				unsigned long *totalpages)
 {
 	struct zone *zone;
 	struct zoneref *z;
 	enum zone_type high_zoneidx = gfp_zone(gfp_mask);
+	bool cpuset_limited = false;
+	int nid;
+
+	/* Default to all available memory */
+	*totalpages = totalram_pages + total_swap_pages;
 
+	if (!zonelist)
+		return CONSTRAINT_NONE;
 	/*
 	 * Reach here only when __GFP_NOFAIL is used. So, we should avoid
 	 * to kill current.We have to random task kill in this case.
@@ -214,26 +241,37 @@ static enum oom_constraint constrained_alloc(struct zonelist *zonelist,
 		return CONSTRAINT_NONE;
 
 	/*
-	 * The nodemask here is a nodemask passed to alloc_pages(). Now,
-	 * cpuset doesn't use this nodemask for its hardwall/softwall/hierarchy
-	 * feature. mempolicy is an only user of nodemask here.
-	 * check mempolicy's nodemask contains all N_HIGH_MEMORY
+	 * This is not a __GFP_THISNODE allocation, so a truncated nodemask in
+	 * the page allocator means a mempolicy is in effect.  Cpuset policy
+	 * is enforced in get_page_from_freelist().
 	 */
-	if (nodemask && !nodes_subset(node_states[N_HIGH_MEMORY], *nodemask))
+	if (nodemask && !nodes_subset(node_states[N_HIGH_MEMORY], *nodemask)) {
+		*totalpages = total_swap_pages;
+		for_each_node_mask(nid, *nodemask)
+			*totalpages += node_spanned_pages(nid);
 		return CONSTRAINT_MEMORY_POLICY;
+	}
 
 	/* Check this allocation failure is caused by cpuset's wall function */
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 			high_zoneidx, nodemask)
 		if (!cpuset_zone_allowed_softwall(zone, gfp_mask))
-			return CONSTRAINT_CPUSET;
+			cpuset_limited = true;
 
+	if (cpuset_limited) {
+		*totalpages = total_swap_pages;
+		for_each_node_mask(nid, cpuset_current_mems_allowed)
+			*totalpages += node_spanned_pages(nid);
+		return CONSTRAINT_CPUSET;
+	}
 	return CONSTRAINT_NONE;
 }
 #else
 static enum oom_constraint constrained_alloc(struct zonelist *zonelist,
-				gfp_t gfp_mask, nodemask_t *nodemask)
+				gfp_t gfp_mask, nodemask_t *nodemask,
+				unsigned long *totalpages)
 {
+	*totalpages = totalram_pages + total_swap_pages;
 	return CONSTRAINT_NONE;
 }
 #endif
@@ -244,28 +282,18 @@ static enum oom_constraint constrained_alloc(struct zonelist *zonelist,
  *
  * (not docbooked, we don't want this one cluttering up the manual)
  */
-static struct task_struct *select_bad_process(unsigned long *ppoints,
-						struct mem_cgroup *mem)
+static struct task_struct *select_bad_process(unsigned int *ppoints,
+		unsigned long totalpages, struct mem_cgroup *mem,
+		const nodemask_t *nodemask)
 {
 	struct task_struct *p;
 	struct task_struct *chosen = NULL;
-	struct timespec uptime;
 	*ppoints = 0;
 
-	do_posix_clock_monotonic_gettime(&uptime);
 	for_each_process(p) {
-		unsigned long points;
+		unsigned int points;
 
-		/*
-		 * skip kernel threads and tasks which have already released
-		 * their mm.
-		 */
-		if (!p->mm)
-			continue;
-		/* skip the init task */
-		if (is_global_init(p))
-			continue;
-		if (mem && !task_in_mem_cgroup(p, mem))
+		if (oom_unkillable_task(p, mem, nodemask))
 			continue;
 
 		/*
@@ -290,19 +318,16 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
 		 * the process of exiting and releasing its resources.
 		 * Otherwise we could get an easy OOM deadlock.
 		 */
-		if (p->flags & PF_EXITING) {
+		if (thread_group_empty(p) && (p->flags & PF_EXITING) && p->mm) {
 			if (p != current)
 				return ERR_PTR(-1UL);
 
 			chosen = p;
-			*ppoints = ULONG_MAX;
+			*ppoints = 1000;
 		}
 
-		if (p->signal->oom_adj == OOM_DISABLE)
-			continue;
-
-		points = badness(p, uptime.tv_sec);
-		if (points > *ppoints || !chosen) {
+		points = oom_badness(p, mem, nodemask, totalpages);
+		if (points > *ppoints) {
 			chosen = p;
 			*ppoints = points;
 		}
@@ -313,11 +338,11 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
 
 /**
  * dump_tasks - dump current memory state of all system tasks
- * @mem: target memory controller
+ * @mem: current's memory controller, if constrained
  *
  * Dumps the current memory state of all system tasks, excluding kernel threads.
  * State information includes task's pid, uid, tgid, vm size, rss, cpu, oom_adj
- * score, and name.
+ * value, oom_score_adj value, and name.
  *
  * If the actual is non-NULL, only tasks that are a member of the mem_cgroup are
  * shown.
@@ -326,44 +351,43 @@ static struct task_struct *select_bad_process(unsigned long *ppoints,
  */
 static void dump_tasks(const struct mem_cgroup *mem)
 {
-	struct task_struct *g, *p;
-
-	printk(KERN_INFO "[ pid ]   uid  tgid total_vm      rss cpu oom_adj "
-	       "name\n");
-	do_each_thread(g, p) {
-		struct mm_struct *mm;
+	struct task_struct *p;
+	struct task_struct *task;
 
-		if (mem && !task_in_mem_cgroup(p, mem))
+	pr_info("[ pid ]   uid  tgid total_vm      rss cpu oom_adj oom_score_adj name\n");
+	for_each_process(p) {
+		if (p->flags & PF_KTHREAD)
 			continue;
-		if (!thread_group_leader(p))
+		if (mem && !task_in_mem_cgroup(p, mem))
 			continue;
 
-		task_lock(p);
-		mm = p->mm;
-		if (!mm) {
+		task = find_lock_task_mm(p);
+		if (!task) {
 			/*
-			 * total_vm and rss sizes do not exist for tasks with no
-			 * mm so there's no need to report them; they can't be
-			 * oom killed anyway.
+			 * This is a kthread or all of p's threads have already
+			 * detached their mm's.  There's no need to report
+			 * them; they can't be oom killed anyway.
 			 */
-			task_unlock(p);
 			continue;
 		}
-		printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d     %3d %s\n",
-		       p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
-		       get_mm_rss(mm), (int)task_cpu(p), p->signal->oom_adj,
-		       p->comm);
-		task_unlock(p);
-	} while_each_thread(g, p);
+
+		pr_info("[%5d] %5d %5d %8lu %8lu %3u     %3d         %5d %s\n",
+			task->pid, __task_cred(task)->uid, task->tgid,
+			task->mm->total_vm, get_mm_rss(task->mm),
+			task_cpu(task), task->signal->oom_adj,
+			task->signal->oom_score_adj, task->comm);
+		task_unlock(task);
+	}
 }
 
 static void dump_header(struct task_struct *p, gfp_t gfp_mask, int order,
 							struct mem_cgroup *mem)
 {
-	pr_warning("%s invoked oom-killer: gfp_mask=0x%x, order=%d, "
-		"oom_adj=%d\n",
-		current->comm, gfp_mask, order, current->signal->oom_adj);
 	task_lock(current);
+	pr_warning("%s invoked oom-killer: gfp_mask=0x%x, order=%d, "
+		"oom_adj=%d, oom_score_adj=%d\n",
+		current->comm, gfp_mask, order, current->signal->oom_adj,
+		current->signal->oom_score_adj);
 	cpuset_print_task_mems_allowed(current);
 	task_unlock(current);
 	dump_stack();
@@ -374,72 +398,43 @@ static void dump_header(struct task_struct *p, gfp_t gfp_mask, int order,
 }
 
 #define K(x) ((x) << (PAGE_SHIFT-10))
-
-/*
- * Send SIGKILL to the selected  process irrespective of  CAP_SYS_RAW_IO
- * flag though it's unlikely that  we select a process with CAP_SYS_RAW_IO
- * set.
- */
-static void __oom_kill_task(struct task_struct *p, int verbose)
+static int oom_kill_task(struct task_struct *p, struct mem_cgroup *mem)
 {
-	if (is_global_init(p)) {
-		WARN_ON(1);
-		printk(KERN_WARNING "tried to kill init!\n");
-		return;
-	}
-
-	task_lock(p);
-	if (!p->mm) {
-		WARN_ON(1);
-		printk(KERN_WARNING "tried to kill an mm-less task %d (%s)!\n",
-			task_pid_nr(p), p->comm);
+	p = find_lock_task_mm(p);
+	if (!p) {
 		task_unlock(p);
-		return;
+		return 1;
 	}
-
-	if (verbose)
-		printk(KERN_ERR "Killed process %d (%s) "
-		       "vsz:%lukB, anon-rss:%lukB, file-rss:%lukB\n",
-		       task_pid_nr(p), p->comm,
-		       K(p->mm->total_vm),
-		       K(get_mm_counter(p->mm, MM_ANONPAGES)),
-		       K(get_mm_counter(p->mm, MM_FILEPAGES)));
+	pr_err("Killed process %d (%s) total-vm:%lukB, anon-rss:%lukB, file-rss:%lukB\n",
+		task_pid_nr(p), p->comm, K(p->mm->total_vm),
+		K(get_mm_counter(p->mm, MM_ANONPAGES)),
+		K(get_mm_counter(p->mm, MM_FILEPAGES)));
 	task_unlock(p);
 
+
+	set_tsk_thread_flag(p, TIF_MEMDIE);
+	force_sig(SIGKILL, p);
+
 	/*
 	 * We give our sacrificial lamb high priority and access to
 	 * all the memory it needs. That way it should be able to
 	 * exit() and clear out its resources quickly...
 	 */
-	p->rt.time_slice = HZ;
-	set_tsk_thread_flag(p, TIF_MEMDIE);
-
-	force_sig(SIGKILL, p);
-}
-
-static int oom_kill_task(struct task_struct *p)
-{
-	/* WARNING: mm may not be dereferenced since we did not obtain its
-	 * value from get_task_mm(p).  This is OK since all we need to do is
-	 * compare mm to q->mm below.
-	 *
-	 * Furthermore, even if mm contains a non-NULL value, p->mm may
-	 * change to NULL at any time since we do not hold task_lock(p).
-	 * However, this is of no concern to us.
-	 */
-	if (!p->mm || p->signal->oom_adj == OOM_DISABLE)
-		return 1;
-
-	__oom_kill_task(p, 1);
+	boost_dying_task_prio(p, mem);
 
 	return 0;
 }
+#undef K
 
 static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
-			    unsigned long points, struct mem_cgroup *mem,
+			    unsigned int points, unsigned long totalpages,
+			    struct mem_cgroup *mem, nodemask_t *nodemask,
 			    const char *message)
 {
-	struct task_struct *c;
+	struct task_struct *victim = p;
+	struct task_struct *child;
+	struct task_struct *t = p;
+	unsigned int victim_points = 0;
 
 	if (printk_ratelimit())
 		dump_header(p, gfp_mask, order, mem);
@@ -449,40 +444,81 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	 * its children or threads, just set TIF_MEMDIE so it can die quickly
 	 */
 	if (p->flags & PF_EXITING) {
-		__oom_kill_task(p, 0);
+		set_tsk_thread_flag(p, TIF_MEMDIE);
+		boost_dying_task_prio(p, mem);
 		return 0;
 	}
 
-	printk(KERN_ERR "%s: kill process %d (%s) score %li or a child\n",
-					message, task_pid_nr(p), p->comm, points);
+	task_lock(p);
+	pr_err("%s: Kill process %d (%s) score %d or sacrifice child\n",
+		message, task_pid_nr(p), p->comm, points);
+	task_unlock(p);
 
-	/* Try to kill a child first */
-	list_for_each_entry(c, &p->children, sibling) {
-		if (c->mm == p->mm)
-			continue;
-		if (mem && !task_in_mem_cgroup(c, mem))
-			continue;
-		if (!oom_kill_task(c))
-			return 0;
+	/*
+	 * If any of p's children has a different mm and is eligible for kill,
+	 * the one with the highest badness() score is sacrificed for its
+	 * parent.  This attempts to lose the minimal amount of work done while
+	 * still freeing memory.
+	 */
+	do {
+		list_for_each_entry(child, &t->children, sibling) {
+			unsigned int child_points;
+
+			/*
+			 * oom_badness() returns 0 if the thread is unkillable
+			 */
+			child_points = oom_badness(child, mem, nodemask,
+								totalpages);
+			if (child_points > victim_points) {
+				victim = child;
+				victim_points = child_points;
+			}
+		}
+	} while_each_thread(p, t);
+
+	return oom_kill_task(victim, mem);
+}
+
+/*
+ * Determines whether the kernel must panic because of the panic_on_oom sysctl.
+ */
+static void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask,
+				int order)
+{
+	if (likely(!sysctl_panic_on_oom))
+		return;
+	if (sysctl_panic_on_oom != 2) {
+		/*
+		 * panic_on_oom == 1 only affects CONSTRAINT_NONE, the kernel
+		 * does not panic for cpuset, mempolicy, or memcg allocation
+		 * failures.
+		 */
+		if (constraint != CONSTRAINT_NONE)
+			return;
 	}
-	return oom_kill_task(p);
+	read_lock(&tasklist_lock);
+	dump_header(NULL, gfp_mask, order, NULL);
+	read_unlock(&tasklist_lock);
+	panic("Out of memory: %s panic_on_oom is enabled\n",
+		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
 }
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
 void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
 {
-	unsigned long points = 0;
+	unsigned long limit;
+	unsigned int points = 0;
 	struct task_struct *p;
 
-	if (sysctl_panic_on_oom == 2)
-		panic("out of memory(memcg). panic_on_oom is selected.\n");
+	check_panic_on_oom(CONSTRAINT_MEMCG, gfp_mask, 0);
+	limit = mem_cgroup_get_limit(mem) >> PAGE_SHIFT;
 	read_lock(&tasklist_lock);
 retry:
-	p = select_bad_process(&points, mem);
+	p = select_bad_process(&points, limit, mem, NULL);
 	if (!p || PTR_ERR(p) == -1UL)
 		goto out;
 
-	if (oom_kill_process(p, gfp_mask, 0, points, mem,
+	if (oom_kill_process(p, gfp_mask, 0, points, limit, mem, NULL,
 				"Memory cgroup out of memory"))
 		goto retry;
 out:
@@ -509,7 +545,7 @@ EXPORT_SYMBOL_GPL(unregister_oom_notifier);
  * if a parallel OOM killing is already taking place that includes a zone in
  * the zonelist.  Otherwise, locks all zones in the zonelist and returns 1.
  */
-int try_set_zone_oom(struct zonelist *zonelist, gfp_t gfp_mask)
+int try_set_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask)
 {
 	struct zoneref *z;
 	struct zone *zone;
@@ -526,7 +562,7 @@ int try_set_zone_oom(struct zonelist *zonelist, gfp_t gfp_mask)
 	for_each_zone_zonelist(zone, z, zonelist, gfp_zone(gfp_mask)) {
 		/*
 		 * Lock each zone in the zonelist under zone_scan_lock so a
-		 * parallel invocation of try_set_zone_oom() doesn't succeed
+		 * parallel invocation of try_set_zonelist_oom() doesn't succeed
 		 * when it shouldn't.
 		 */
 		zone_set_flag(zone, ZONE_OOM_LOCKED);
@@ -555,65 +591,40 @@ void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask)
 }
 
 /*
- * Must be called with tasklist_lock held for read.
+ * Try to acquire the oom killer lock for all system zones.  Returns zero if a
+ * parallel oom killing is taking place, otherwise locks all zones and returns
+ * non-zero.
  */
-static void __out_of_memory(gfp_t gfp_mask, int order)
+static int try_set_system_oom(void)
 {
-	struct task_struct *p;
-	unsigned long points;
-
-	if (sysctl_oom_kill_allocating_task)
-		if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
-				"Out of memory (oom_kill_allocating_task)"))
-			return;
-retry:
-	/*
-	 * Rambo mode: Shoot down a process and hope it solves whatever
-	 * issues we may have.
-	 */
-	p = select_bad_process(&points, NULL);
-
-	if (PTR_ERR(p) == -1UL)
-		return;
-
-	/* Found nothing?!?! Either we hang forever, or we panic. */
-	if (!p) {
-		read_unlock(&tasklist_lock);
-		dump_header(NULL, gfp_mask, order, NULL);
-		panic("Out of memory and no killable processes...\n");
-	}
+	struct zone *zone;
+	int ret = 1;
 
-	if (oom_kill_process(p, gfp_mask, order, points, NULL,
-			     "Out of memory"))
-		goto retry;
+	spin_lock(&zone_scan_lock);
+	for_each_populated_zone(zone)
+		if (zone_is_oom_locked(zone)) {
+			ret = 0;
+			goto out;
+		}
+	for_each_populated_zone(zone)
+		zone_set_flag(zone, ZONE_OOM_LOCKED);
+out:
+	spin_unlock(&zone_scan_lock);
+	return ret;
 }
 
 /*
- * pagefault handler calls into here because it is out of memory but
- * doesn't know exactly how or why.
+ * Clears ZONE_OOM_LOCKED for all system zones so that failed allocation
+ * attempts or page faults may now recall the oom killer, if necessary.
  */
-void pagefault_out_of_memory(void)
+static void clear_system_oom(void)
 {
-	unsigned long freed = 0;
-
-	blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
-	if (freed > 0)
-		/* Got some memory back in the last second. */
-		return;
-
-	if (sysctl_panic_on_oom)
-		panic("out of memory from page fault. panic_on_oom is selected.\n");
-
-	read_lock(&tasklist_lock);
-	__out_of_memory(0, 0); /* unknown gfp_mask and order */
-	read_unlock(&tasklist_lock);
+	struct zone *zone;
 
-	/*
-	 * Give "p" a good chance of killing itself before we
-	 * retry to allocate memory.
-	 */
-	if (!test_thread_flag(TIF_MEMDIE))
-		schedule_timeout_uninterruptible(1);
+	spin_lock(&zone_scan_lock);
+	for_each_populated_zone(zone)
+		zone_clear_flag(zone, ZONE_OOM_LOCKED);
+	spin_unlock(&zone_scan_lock);
 }
 
 /**
@@ -621,6 +632,7 @@ void pagefault_out_of_memory(void)
  * @zonelist: zonelist pointer
  * @gfp_mask: memory allocation flags
  * @order: amount of memory being requested as a power of 2
+ * @nodemask: nodemask passed to page allocator
  *
  * If we run out of memory, we have the choice between either
  * killing a random task (bad), letting the system crash (worse)
@@ -630,43 +642,68 @@ void pagefault_out_of_memory(void)
 void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 		int order, nodemask_t *nodemask)
 {
+	struct task_struct *p;
+	unsigned long totalpages;
 	unsigned long freed = 0;
-	enum oom_constraint constraint;
+	unsigned int points;
+	enum oom_constraint constraint = CONSTRAINT_NONE;
 
 	blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
 	if (freed > 0)
 		/* Got some memory back in the last second. */
 		return;
 
-	if (sysctl_panic_on_oom == 2) {
-		dump_header(NULL, gfp_mask, order, NULL);
-		panic("out of memory. Compulsory panic_on_oom is selected.\n");
+	/*
+	 * If current has a pending SIGKILL, then automatically select it.  The
+	 * goal is to allow it to allocate so that it may quickly exit and free
+	 * its memory.
+	 */
+	if (fatal_signal_pending(current)) {
+		set_thread_flag(TIF_MEMDIE);
+		boost_dying_task_prio(current, NULL);
+		return;
 	}
 
 	/*
 	 * Check if there were limitations on the allocation (only relevant for
 	 * NUMA) that may require different handling.
 	 */
-	constraint = constrained_alloc(zonelist, gfp_mask, nodemask);
+	constraint = constrained_alloc(zonelist, gfp_mask, nodemask,
+						&totalpages);
+	check_panic_on_oom(constraint, gfp_mask, order);
+
 	read_lock(&tasklist_lock);
+	if (sysctl_oom_kill_allocating_task &&
+	    !oom_unkillable_task(current, NULL, nodemask) &&
+	    (current->signal->oom_adj != OOM_DISABLE)) {
+		/*
+		 * oom_kill_process() needs tasklist_lock held.  If it returns
+		 * non-zero, current could not be killed so we must fallback to
+		 * the tasklist scan.
+		 */
+		if (!oom_kill_process(current, gfp_mask, order, 0, totalpages,
+				NULL, nodemask,
+				"Out of memory (oom_kill_allocating_task)"))
+			return;
+	}
 
-	switch (constraint) {
-	case CONSTRAINT_MEMORY_POLICY:
-		oom_kill_process(current, gfp_mask, order, 0, NULL,
-				"No available memory (MPOL_BIND)");
-		break;
+retry:
+	p = select_bad_process(&points, totalpages, NULL,
+			constraint == CONSTRAINT_MEMORY_POLICY ? nodemask :
+								 NULL);
+	if (PTR_ERR(p) == -1UL)
+		return;
 
-	case CONSTRAINT_NONE:
-		if (sysctl_panic_on_oom) {
-			dump_header(NULL, gfp_mask, order, NULL);
-			panic("out of memory. panic_on_oom is selected\n");
-		}
-		/* Fall-through */
-	case CONSTRAINT_CPUSET:
-		__out_of_memory(gfp_mask, order);
-		break;
+	/* Found nothing?!?! Either we hang forever, or we panic. */
+	if (!p) {
+		dump_header(NULL, gfp_mask, order, NULL);
+		read_unlock(&tasklist_lock);
+		panic("Out of memory and no killable processes...\n");
 	}
 
+	if (oom_kill_process(p, gfp_mask, order, points, totalpages, NULL,
+				nodemask, "Out of memory"))
+		goto retry;
 	read_unlock(&tasklist_lock);
 
 	/*
@@ -676,3 +713,19 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 	if (!test_thread_flag(TIF_MEMDIE))
 		schedule_timeout_uninterruptible(1);
 }
+
+/*
+ * The pagefault handler calls here because it is out of memory, so kill a
+ * memory-hogging task.  If a populated zone has ZONE_OOM_LOCKED set, a parallel
+ * oom killing is already in progress so do nothing.  If a task is found with
+ * TIF_MEMDIE set, it has been killed so do nothing and allow it to exit.
+ */
+void pagefault_out_of_memory(void)
+{
+	if (try_set_system_oom()) {
+		out_of_memory(NULL, 0, 0, NULL);
+		clear_system_oom();
+	}
+	if (!test_thread_flag(TIF_MEMDIE))
+		schedule_timeout_uninterruptible(1);
+}
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 37498ef6154..df8202ebc7b 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -805,6 +805,41 @@ void __init page_writeback_init(void)
 }
 
 /**
+ * tag_pages_for_writeback - tag pages to be written by write_cache_pages
+ * @mapping: address space structure to write
+ * @start: starting page index
+ * @end: ending page index (inclusive)
+ *
+ * This function scans the page range from @start to @end (inclusive) and tags
+ * all pages that have DIRTY tag set with a special TOWRITE tag. The idea is
+ * that write_cache_pages (or whoever calls this function) will then use
+ * TOWRITE tag to identify pages eligible for writeback.  This mechanism is
+ * used to avoid livelocking of writeback by a process steadily creating new
+ * dirty pages in the file (thus it is important for this function to be quick
+ * so that it can tag pages faster than a dirtying process can create them).
+ */
+/*
+ * We tag pages in batches of WRITEBACK_TAG_BATCH to reduce tree_lock latency.
+ */
+#define WRITEBACK_TAG_BATCH 4096
+void tag_pages_for_writeback(struct address_space *mapping,
+			     pgoff_t start, pgoff_t end)
+{
+	unsigned long tagged;
+
+	do {
+		spin_lock_irq(&mapping->tree_lock);
+		tagged = radix_tree_range_tag_if_tagged(&mapping->page_tree,
+				&start, end, WRITEBACK_TAG_BATCH,
+				PAGECACHE_TAG_DIRTY, PAGECACHE_TAG_TOWRITE);
+		spin_unlock_irq(&mapping->tree_lock);
+		WARN_ON_ONCE(tagged > WRITEBACK_TAG_BATCH);
+		cond_resched();
+	} while (tagged >= WRITEBACK_TAG_BATCH);
+}
+EXPORT_SYMBOL(tag_pages_for_writeback);
+
+/**
  * write_cache_pages - walk the list of dirty pages of the given address space and write all of them.
  * @mapping: address space structure to write
  * @wbc: subtract the number of written pages from *@wbc->nr_to_write
@@ -818,6 +853,13 @@ void __init page_writeback_init(void)
  * the call was made get new I/O started against them.  If wbc->sync_mode is
  * WB_SYNC_ALL then we were called for data integrity and we must wait for
  * existing IO to complete.
+ *
+ * To avoid livelocks (when other process dirties new pages), we first tag
+ * pages which should be written back with TOWRITE tag and only then start
+ * writing them. For data-integrity sync we have to be careful so that we do
+ * not miss some pages (e.g., because some other process has cleared TOWRITE
+ * tag we set). The rule we follow is that TOWRITE tag can be cleared only
+ * by the process clearing the DIRTY tag (and submitting the page for IO).
  */
 int write_cache_pages(struct address_space *mapping,
 		      struct writeback_control *wbc, writepage_t writepage,
@@ -833,6 +875,7 @@ int write_cache_pages(struct address_space *mapping,
 	pgoff_t done_index;
 	int cycled;
 	int range_whole = 0;
+	int tag;
 
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
@@ -849,29 +892,19 @@ int write_cache_pages(struct address_space *mapping,
 		if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 			range_whole = 1;
 		cycled = 1; /* ignore range_cyclic tests */
-
-		/*
-		 * If this is a data integrity sync, cap the writeback to the
-		 * current end of file. Any extension to the file that occurs
-		 * after this is a new write and we don't need to write those
-		 * pages out to fulfil our data integrity requirements. If we
-		 * try to write them out, we can get stuck in this scan until
-		 * the concurrent writer stops adding dirty pages and extending
-		 * EOF.
-		 */
-		if (wbc->sync_mode == WB_SYNC_ALL &&
-		    wbc->range_end == LLONG_MAX) {
-			end = i_size_read(mapping->host) >> PAGE_CACHE_SHIFT;
-		}
 	}
-
+	if (wbc->sync_mode == WB_SYNC_ALL)
+		tag = PAGECACHE_TAG_TOWRITE;
+	else
+		tag = PAGECACHE_TAG_DIRTY;
 retry:
+	if (wbc->sync_mode == WB_SYNC_ALL)
+		tag_pages_for_writeback(mapping, index, end);
 	done_index = index;
 	while (!done && (index <= end)) {
 		int i;
 
-		nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
-			      PAGECACHE_TAG_DIRTY,
+		nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, tag,
 			      min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1);
 		if (nr_pages == 0)
 			break;
@@ -1327,6 +1360,9 @@ int test_set_page_writeback(struct page *page)
 			radix_tree_tag_clear(&mapping->page_tree,
 						page_index(page),
 						PAGECACHE_TAG_DIRTY);
+		radix_tree_tag_clear(&mapping->page_tree,
+				     page_index(page),
+				     PAGECACHE_TAG_TOWRITE);
 		spin_unlock_irqrestore(&mapping->tree_lock, flags);
 	} else {
 		ret = TestSetPageWriteback(page);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 9bd339eb04c..a9649f4b261 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1738,7 +1738,7 @@ __alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order,
 	struct page *page;
 
 	/* Acquire the OOM killer lock for the zones in zonelist */
-	if (!try_set_zone_oom(zonelist, gfp_mask)) {
+	if (!try_set_zonelist_oom(zonelist, gfp_mask)) {
 		schedule_timeout_uninterruptible(1);
 		return NULL;
 	}
@@ -1759,6 +1759,9 @@ __alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order,
 		/* The OOM killer will not help higher order allocs */
 		if (order > PAGE_ALLOC_COSTLY_ORDER)
 			goto out;
+		/* The OOM killer does not needlessly kill tasks for lowmem */
+		if (high_zoneidx < ZONE_NORMAL)
+			goto out;
 		/*
 		 * GFP_THISNODE contains __GFP_NORETRY and we never hit this.
 		 * Sanity check for bare calls of __GFP_THISNODE, not real OOM.
@@ -2052,15 +2055,23 @@ rebalance:
 			if (page)
 				goto got_pg;
 
-			/*
-			 * The OOM killer does not trigger for high-order
-			 * ~__GFP_NOFAIL allocations so if no progress is being
-			 * made, there are no other options and retrying is
-			 * unlikely to help.
-			 */
-			if (order > PAGE_ALLOC_COSTLY_ORDER &&
-						!(gfp_mask & __GFP_NOFAIL))
-				goto nopage;
+			if (!(gfp_mask & __GFP_NOFAIL)) {
+				/*
+				 * The oom killer is not called for high-order
+				 * allocations that may fail, so if no progress
+				 * is being made, there are no other options and
+				 * retrying is unlikely to help.
+				 */
+				if (order > PAGE_ALLOC_COSTLY_ORDER)
+					goto nopage;
+				/*
+				 * The oom killer is not called for lowmem
+				 * allocations to prevent needlessly killing
+				 * innocent tasks.
+				 */
+				if (high_zoneidx < ZONE_NORMAL)
+					goto nopage;
+			}
 
 			goto restart;
 		}
@@ -4089,8 +4100,6 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat,
 		zone_seqlock_init(zone);
 		zone->zone_pgdat = pgdat;
 
-		zone->prev_priority = DEF_PRIORITY;
-
 		zone_pcp_init(zone);
 		for_each_lru(l) {
 			INIT_LIST_HEAD(&zone->lru[l].list);
diff --git a/mm/rmap.c b/mm/rmap.c
index 38a336e2eea..a7d0f548263 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -132,9 +132,14 @@ int anon_vma_prepare(struct vm_area_struct *vma)
 			if (unlikely(!anon_vma))
 				goto out_enomem_free_avc;
 			allocated = anon_vma;
+			/*
+			 * This VMA had no anon_vma yet.  This anon_vma is
+			 * the root of any anon_vma tree that might form.
+			 */
+			anon_vma->root = anon_vma;
 		}
 
-		spin_lock(&anon_vma->lock);
+		anon_vma_lock(anon_vma);
 		/* page_table_lock to protect against threads */
 		spin_lock(&mm->page_table_lock);
 		if (likely(!vma->anon_vma)) {
@@ -142,12 +147,12 @@ int anon_vma_prepare(struct vm_area_struct *vma)
 			avc->anon_vma = anon_vma;
 			avc->vma = vma;
 			list_add(&avc->same_vma, &vma->anon_vma_chain);
-			list_add(&avc->same_anon_vma, &anon_vma->head);
+			list_add_tail(&avc->same_anon_vma, &anon_vma->head);
 			allocated = NULL;
 			avc = NULL;
 		}
 		spin_unlock(&mm->page_table_lock);
-		spin_unlock(&anon_vma->lock);
+		anon_vma_unlock(anon_vma);
 
 		if (unlikely(allocated))
 			anon_vma_free(allocated);
@@ -170,9 +175,9 @@ static void anon_vma_chain_link(struct vm_area_struct *vma,
 	avc->anon_vma = anon_vma;
 	list_add(&avc->same_vma, &vma->anon_vma_chain);
 
-	spin_lock(&anon_vma->lock);
+	anon_vma_lock(anon_vma);
 	list_add_tail(&avc->same_anon_vma, &anon_vma->head);
-	spin_unlock(&anon_vma->lock);
+	anon_vma_unlock(anon_vma);
 }
 
 /*
@@ -224,9 +229,21 @@ int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma)
 	avc = anon_vma_chain_alloc();
 	if (!avc)
 		goto out_error_free_anon_vma;
-	anon_vma_chain_link(vma, avc, anon_vma);
+
+	/*
+	 * The root anon_vma's spinlock is the lock actually used when we
+	 * lock any of the anon_vmas in this anon_vma tree.
+	 */
+	anon_vma->root = pvma->anon_vma->root;
+	/*
+	 * With KSM refcounts, an anon_vma can stay around longer than the
+	 * process it belongs to.  The root anon_vma needs to be pinned
+	 * until this anon_vma is freed, because the lock lives in the root.
+	 */
+	get_anon_vma(anon_vma->root);
 	/* Mark this anon_vma as the one where our new (COWed) pages go. */
 	vma->anon_vma = anon_vma;
+	anon_vma_chain_link(vma, avc, anon_vma);
 
 	return 0;
 
@@ -246,22 +263,29 @@ static void anon_vma_unlink(struct anon_vma_chain *anon_vma_chain)
 	if (!anon_vma)
 		return;
 
-	spin_lock(&anon_vma->lock);
+	anon_vma_lock(anon_vma);
 	list_del(&anon_vma_chain->same_anon_vma);
 
 	/* We must garbage collect the anon_vma if it's empty */
 	empty = list_empty(&anon_vma->head) && !anonvma_external_refcount(anon_vma);
-	spin_unlock(&anon_vma->lock);
+	anon_vma_unlock(anon_vma);
 
-	if (empty)
+	if (empty) {
+		/* We no longer need the root anon_vma */
+		if (anon_vma->root != anon_vma)
+			drop_anon_vma(anon_vma->root);
 		anon_vma_free(anon_vma);
+	}
 }
 
 void unlink_anon_vmas(struct vm_area_struct *vma)
 {
 	struct anon_vma_chain *avc, *next;
 
-	/* Unlink each anon_vma chained to the VMA. */
+	/*
+	 * Unlink each anon_vma chained to the VMA.  This list is ordered
+	 * from newest to oldest, ensuring the root anon_vma gets freed last.
+	 */
 	list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
 		anon_vma_unlink(avc);
 		list_del(&avc->same_vma);
@@ -302,7 +326,7 @@ struct anon_vma *page_lock_anon_vma(struct page *page)
 		goto out;
 
 	anon_vma = (struct anon_vma *) (anon_mapping - PAGE_MAPPING_ANON);
-	spin_lock(&anon_vma->lock);
+	anon_vma_lock(anon_vma);
 	return anon_vma;
 out:
 	rcu_read_unlock();
@@ -311,7 +335,7 @@ out:
 
 void page_unlock_anon_vma(struct anon_vma *anon_vma)
 {
-	spin_unlock(&anon_vma->lock);
+	anon_vma_unlock(anon_vma);
 	rcu_read_unlock();
 }
 
@@ -340,9 +364,10 @@ vma_address(struct page *page, struct vm_area_struct *vma)
  */
 unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 {
-	if (PageAnon(page))
-		;
-	else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) {
+	if (PageAnon(page)) {
+		if (vma->anon_vma->root != page_anon_vma(page)->root)
+			return -EFAULT;
+	} else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) {
 		if (!vma->vm_file ||
 		    vma->vm_file->f_mapping != page->mapping)
 			return -EFAULT;
@@ -743,14 +768,20 @@ static void __page_set_anon_rmap(struct page *page,
 	 * If the page isn't exclusively mapped into this vma,
 	 * we must use the _oldest_ possible anon_vma for the
 	 * page mapping!
-	 *
-	 * So take the last AVC chain entry in the vma, which is
-	 * the deepest ancestor, and use the anon_vma from that.
 	 */
 	if (!exclusive) {
-		struct anon_vma_chain *avc;
-		avc = list_entry(vma->anon_vma_chain.prev, struct anon_vma_chain, same_vma);
-		anon_vma = avc->anon_vma;
+		if (PageAnon(page))
+			return;
+		anon_vma = anon_vma->root;
+	} else {
+		/*
+		 * In this case, swapped-out-but-not-discarded swap-cache
+		 * is remapped. So, no need to update page->mapping here.
+		 * We convice anon_vma poitned by page->mapping is not obsolete
+		 * because vma->anon_vma is necessary to be a family of it.
+		 */
+		if (PageAnon(page))
+			return;
 	}
 
 	anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
@@ -780,6 +811,7 @@ static void __page_check_anon_rmap(struct page *page,
 	 * are initially only visible via the pagetables, and the pte is locked
 	 * over the call to page_add_new_anon_rmap.
 	 */
+	BUG_ON(page_anon_vma(page)->root != vma->anon_vma->root);
 	BUG_ON(page->index != linear_page_index(vma, address));
 #endif
 }
@@ -798,6 +830,17 @@ static void __page_check_anon_rmap(struct page *page,
 void page_add_anon_rmap(struct page *page,
 	struct vm_area_struct *vma, unsigned long address)
 {
+	do_page_add_anon_rmap(page, vma, address, 0);
+}
+
+/*
+ * Special version of the above for do_swap_page, which often runs
+ * into pages that are exclusively owned by the current process.
+ * Everybody else should continue to use page_add_anon_rmap above.
+ */
+void do_page_add_anon_rmap(struct page *page,
+	struct vm_area_struct *vma, unsigned long address, int exclusive)
+{
 	int first = atomic_inc_and_test(&page->_mapcount);
 	if (first)
 		__inc_zone_page_state(page, NR_ANON_PAGES);
@@ -807,7 +850,7 @@ void page_add_anon_rmap(struct page *page,
 	VM_BUG_ON(!PageLocked(page));
 	VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end);
 	if (first)
-		__page_set_anon_rmap(page, vma, address, 0);
+		__page_set_anon_rmap(page, vma, address, exclusive);
 	else
 		__page_check_anon_rmap(page, vma, address);
 }
@@ -1368,6 +1411,42 @@ int try_to_munlock(struct page *page)
 		return try_to_unmap_file(page, TTU_MUNLOCK);
 }
 
+#if defined(CONFIG_KSM) || defined(CONFIG_MIGRATION)
+/*
+ * Drop an anon_vma refcount, freeing the anon_vma and anon_vma->root
+ * if necessary.  Be careful to do all the tests under the lock.  Once
+ * we know we are the last user, nobody else can get a reference and we
+ * can do the freeing without the lock.
+ */
+void drop_anon_vma(struct anon_vma *anon_vma)
+{
+	BUG_ON(atomic_read(&anon_vma->external_refcount) <= 0);
+	if (atomic_dec_and_lock(&anon_vma->external_refcount, &anon_vma->root->lock)) {
+		struct anon_vma *root = anon_vma->root;
+		int empty = list_empty(&anon_vma->head);
+		int last_root_user = 0;
+		int root_empty = 0;
+
+		/*
+		 * The refcount on a non-root anon_vma got dropped.  Drop
+		 * the refcount on the root and check if we need to free it.
+		 */
+		if (empty && anon_vma != root) {
+			BUG_ON(atomic_read(&root->external_refcount) <= 0);
+			last_root_user = atomic_dec_and_test(&root->external_refcount);
+			root_empty = list_empty(&root->head);
+		}
+		anon_vma_unlock(anon_vma);
+
+		if (empty) {
+			anon_vma_free(anon_vma);
+			if (root_empty && last_root_user)
+				anon_vma_free(root);
+		}
+	}
+}
+#endif
+
 #ifdef CONFIG_MIGRATION
 /*
  * rmap_walk() and its helpers rmap_walk_anon() and rmap_walk_file():
@@ -1389,7 +1468,7 @@ static int rmap_walk_anon(struct page *page, int (*rmap_one)(struct page *,
 	anon_vma = page_anon_vma(page);
 	if (!anon_vma)
 		return ret;
-	spin_lock(&anon_vma->lock);
+	anon_vma_lock(anon_vma);
 	list_for_each_entry(avc, &anon_vma->head, same_anon_vma) {
 		struct vm_area_struct *vma = avc->vma;
 		unsigned long address = vma_address(page, vma);
@@ -1399,7 +1478,7 @@ static int rmap_walk_anon(struct page *page, int (*rmap_one)(struct page *,
 		if (ret != SWAP_AGAIN)
 			break;
 	}
-	spin_unlock(&anon_vma->lock);
+	anon_vma_unlock(anon_vma);
 	return ret;
 }
 
diff --git a/mm/shmem.c b/mm/shmem.c
index f65f84062db..566f9a481e6 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -28,6 +28,7 @@
 #include <linux/file.h>
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/percpu_counter.h>
 #include <linux/swap.h>
 
 static struct vfsmount *shm_mnt;
@@ -233,10 +234,10 @@ static void shmem_free_blocks(struct inode *inode, long pages)
 {
 	struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
 	if (sbinfo->max_blocks) {
-		spin_lock(&sbinfo->stat_lock);
-		sbinfo->free_blocks += pages;
+		percpu_counter_add(&sbinfo->used_blocks, -pages);
+		spin_lock(&inode->i_lock);
 		inode->i_blocks -= pages*BLOCKS_PER_PAGE;
-		spin_unlock(&sbinfo->stat_lock);
+		spin_unlock(&inode->i_lock);
 	}
 }
 
@@ -416,19 +417,17 @@ static swp_entry_t *shmem_swp_alloc(struct shmem_inode_info *info, unsigned long
 		if (sgp == SGP_READ)
 			return shmem_swp_map(ZERO_PAGE(0));
 		/*
-		 * Test free_blocks against 1 not 0, since we have 1 data
+		 * Test used_blocks against 1 less max_blocks, since we have 1 data
 		 * page (and perhaps indirect index pages) yet to allocate:
 		 * a waste to allocate index if we cannot allocate data.
 		 */
 		if (sbinfo->max_blocks) {
-			spin_lock(&sbinfo->stat_lock);
-			if (sbinfo->free_blocks <= 1) {
-				spin_unlock(&sbinfo->stat_lock);
+			if (percpu_counter_compare(&sbinfo->used_blocks, (sbinfo->max_blocks - 1)) > 0)
 				return ERR_PTR(-ENOSPC);
-			}
-			sbinfo->free_blocks--;
+			percpu_counter_inc(&sbinfo->used_blocks);
+			spin_lock(&inode->i_lock);
 			inode->i_blocks += BLOCKS_PER_PAGE;
-			spin_unlock(&sbinfo->stat_lock);
+			spin_unlock(&inode->i_lock);
 		}
 
 		spin_unlock(&info->lock);
@@ -1223,6 +1222,7 @@ static int shmem_getpage(struct inode *inode, unsigned long idx,
 	struct shmem_sb_info *sbinfo;
 	struct page *filepage = *pagep;
 	struct page *swappage;
+	struct page *prealloc_page = NULL;
 	swp_entry_t *entry;
 	swp_entry_t swap;
 	gfp_t gfp;
@@ -1247,7 +1247,6 @@ repeat:
 		filepage = find_lock_page(mapping, idx);
 	if (filepage && PageUptodate(filepage))
 		goto done;
-	error = 0;
 	gfp = mapping_gfp_mask(mapping);
 	if (!filepage) {
 		/*
@@ -1258,7 +1257,19 @@ repeat:
 		if (error)
 			goto failed;
 		radix_tree_preload_end();
+		if (sgp != SGP_READ && !prealloc_page) {
+			/* We don't care if this fails */
+			prealloc_page = shmem_alloc_page(gfp, info, idx);
+			if (prealloc_page) {
+				if (mem_cgroup_cache_charge(prealloc_page,
+						current->mm, GFP_KERNEL)) {
+					page_cache_release(prealloc_page);
+					prealloc_page = NULL;
+				}
+			}
+		}
 	}
+	error = 0;
 
 	spin_lock(&info->lock);
 	shmem_recalc_inode(inode);
@@ -1387,17 +1398,16 @@ repeat:
 		shmem_swp_unmap(entry);
 		sbinfo = SHMEM_SB(inode->i_sb);
 		if (sbinfo->max_blocks) {
-			spin_lock(&sbinfo->stat_lock);
-			if (sbinfo->free_blocks == 0 ||
+			if ((percpu_counter_compare(&sbinfo->used_blocks, sbinfo->max_blocks) > 0) ||
 			    shmem_acct_block(info->flags)) {
-				spin_unlock(&sbinfo->stat_lock);
 				spin_unlock(&info->lock);
 				error = -ENOSPC;
 				goto failed;
 			}
-			sbinfo->free_blocks--;
+			percpu_counter_inc(&sbinfo->used_blocks);
+			spin_lock(&inode->i_lock);
 			inode->i_blocks += BLOCKS_PER_PAGE;
-			spin_unlock(&sbinfo->stat_lock);
+			spin_unlock(&inode->i_lock);
 		} else if (shmem_acct_block(info->flags)) {
 			spin_unlock(&info->lock);
 			error = -ENOSPC;
@@ -1407,28 +1417,38 @@ repeat:
 		if (!filepage) {
 			int ret;
 
-			spin_unlock(&info->lock);
-			filepage = shmem_alloc_page(gfp, info, idx);
-			if (!filepage) {
-				shmem_unacct_blocks(info->flags, 1);
-				shmem_free_blocks(inode, 1);
-				error = -ENOMEM;
-				goto failed;
-			}
-			SetPageSwapBacked(filepage);
+			if (!prealloc_page) {
+				spin_unlock(&info->lock);
+				filepage = shmem_alloc_page(gfp, info, idx);
+				if (!filepage) {
+					shmem_unacct_blocks(info->flags, 1);
+					shmem_free_blocks(inode, 1);
+					error = -ENOMEM;
+					goto failed;
+				}
+				SetPageSwapBacked(filepage);
 
-			/* Precharge page while we can wait, compensate after */
-			error = mem_cgroup_cache_charge(filepage, current->mm,
-					GFP_KERNEL);
-			if (error) {
-				page_cache_release(filepage);
-				shmem_unacct_blocks(info->flags, 1);
-				shmem_free_blocks(inode, 1);
-				filepage = NULL;
-				goto failed;
+				/*
+				 * Precharge page while we can wait, compensate
+				 * after
+				 */
+				error = mem_cgroup_cache_charge(filepage,
+					current->mm, GFP_KERNEL);
+				if (error) {
+					page_cache_release(filepage);
+					shmem_unacct_blocks(info->flags, 1);
+					shmem_free_blocks(inode, 1);
+					filepage = NULL;
+					goto failed;
+				}
+
+				spin_lock(&info->lock);
+			} else {
+				filepage = prealloc_page;
+				prealloc_page = NULL;
+				SetPageSwapBacked(filepage);
 			}
 
-			spin_lock(&info->lock);
 			entry = shmem_swp_alloc(info, idx, sgp);
 			if (IS_ERR(entry))
 				error = PTR_ERR(entry);
@@ -1469,13 +1489,19 @@ repeat:
 	}
 done:
 	*pagep = filepage;
-	return 0;
+	error = 0;
+	goto out;
 
 failed:
 	if (*pagep != filepage) {
 		unlock_page(filepage);
 		page_cache_release(filepage);
 	}
+out:
+	if (prealloc_page) {
+		mem_cgroup_uncharge_cache_page(prealloc_page);
+		page_cache_release(prealloc_page);
+	}
 	return error;
 }
 
@@ -1791,17 +1817,16 @@ static int shmem_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_type = TMPFS_MAGIC;
 	buf->f_bsize = PAGE_CACHE_SIZE;
 	buf->f_namelen = NAME_MAX;
-	spin_lock(&sbinfo->stat_lock);
 	if (sbinfo->max_blocks) {
 		buf->f_blocks = sbinfo->max_blocks;
-		buf->f_bavail = buf->f_bfree = sbinfo->free_blocks;
+		buf->f_bavail = buf->f_bfree =
+				sbinfo->max_blocks - percpu_counter_sum(&sbinfo->used_blocks);
 	}
 	if (sbinfo->max_inodes) {
 		buf->f_files = sbinfo->max_inodes;
 		buf->f_ffree = sbinfo->free_inodes;
 	}
 	/* else leave those fields 0 like simple_statfs */
-	spin_unlock(&sbinfo->stat_lock);
 	return 0;
 }
 
@@ -2242,7 +2267,6 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
 {
 	struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
 	struct shmem_sb_info config = *sbinfo;
-	unsigned long blocks;
 	unsigned long inodes;
 	int error = -EINVAL;
 
@@ -2250,9 +2274,8 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
 		return error;
 
 	spin_lock(&sbinfo->stat_lock);
-	blocks = sbinfo->max_blocks - sbinfo->free_blocks;
 	inodes = sbinfo->max_inodes - sbinfo->free_inodes;
-	if (config.max_blocks < blocks)
+	if (percpu_counter_compare(&sbinfo->used_blocks, config.max_blocks) > 0)
 		goto out;
 	if (config.max_inodes < inodes)
 		goto out;
@@ -2269,7 +2292,6 @@ static int shmem_remount_fs(struct super_block *sb, int *flags, char *data)
 
 	error = 0;
 	sbinfo->max_blocks  = config.max_blocks;
-	sbinfo->free_blocks = config.max_blocks - blocks;
 	sbinfo->max_inodes  = config.max_inodes;
 	sbinfo->free_inodes = config.max_inodes - inodes;
 
@@ -2344,7 +2366,7 @@ int shmem_fill_super(struct super_block *sb, void *data, int silent)
 #endif
 
 	spin_lock_init(&sbinfo->stat_lock);
-	sbinfo->free_blocks = sbinfo->max_blocks;
+	percpu_counter_init(&sbinfo->used_blocks, 0);
 	sbinfo->free_inodes = sbinfo->max_inodes;
 
 	sb->s_maxbytes = SHMEM_MAX_BYTES;
diff --git a/mm/slab.c b/mm/slab.c
index e49f8f46f46..88435fcc838 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -102,7 +102,6 @@
 #include	<linux/cpu.h>
 #include	<linux/sysctl.h>
 #include	<linux/module.h>
-#include	<linux/kmemtrace.h>
 #include	<linux/rcupdate.h>
 #include	<linux/string.h>
 #include	<linux/uaccess.h>
@@ -395,7 +394,7 @@ static void kmem_list3_init(struct kmem_list3 *parent)
 #define	STATS_DEC_ACTIVE(x)	do { } while (0)
 #define	STATS_INC_ALLOCED(x)	do { } while (0)
 #define	STATS_INC_GROWN(x)	do { } while (0)
-#define	STATS_ADD_REAPED(x,y)	do { } while (0)
+#define	STATS_ADD_REAPED(x,y)	do { (void)(y); } while (0)
 #define	STATS_SET_HIGH(x)	do { } while (0)
 #define	STATS_INC_ERR(x)	do { } while (0)
 #define	STATS_INC_NODEALLOCS(x)	do { } while (0)
@@ -861,7 +860,7 @@ static void __cpuinit start_cpu_timer(int cpu)
 	 */
 	if (keventd_up() && reap_work->work.func == NULL) {
 		init_reap_node(cpu);
-		INIT_DELAYED_WORK(reap_work, cache_reap);
+		INIT_DELAYED_WORK_DEFERRABLE(reap_work, cache_reap);
 		schedule_delayed_work_on(cpu, reap_work,
 					__round_jiffies_relative(HZ, cpu));
 	}
diff --git a/mm/slob.c b/mm/slob.c
index 23631e2bb57..d582171c810 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -66,8 +66,10 @@
 #include <linux/module.h>
 #include <linux/rcupdate.h>
 #include <linux/list.h>
-#include <linux/kmemtrace.h>
 #include <linux/kmemleak.h>
+
+#include <trace/events/kmem.h>
+
 #include <asm/atomic.h>
 
 /*
@@ -394,6 +396,7 @@ static void slob_free(void *block, int size)
 	slob_t *prev, *next, *b = (slob_t *)block;
 	slobidx_t units;
 	unsigned long flags;
+	struct list_head *slob_list;
 
 	if (unlikely(ZERO_OR_NULL_PTR(block)))
 		return;
@@ -422,7 +425,13 @@ static void slob_free(void *block, int size)
 		set_slob(b, units,
 			(void *)((unsigned long)(b +
 					SLOB_UNITS(PAGE_SIZE)) & PAGE_MASK));
-		set_slob_page_free(sp, &free_slob_small);
+		if (size < SLOB_BREAK1)
+			slob_list = &free_slob_small;
+		else if (size < SLOB_BREAK2)
+			slob_list = &free_slob_medium;
+		else
+			slob_list = &free_slob_large;
+		set_slob_page_free(sp, slob_list);
 		goto out;
 	}
 
@@ -639,7 +648,6 @@ void kmem_cache_free(struct kmem_cache *c, void *b)
 	if (unlikely(c->flags & SLAB_DESTROY_BY_RCU)) {
 		struct slob_rcu *slob_rcu;
 		slob_rcu = b + (c->size - sizeof(struct slob_rcu));
-		INIT_RCU_HEAD(&slob_rcu->head);
 		slob_rcu->size = c->size;
 		call_rcu(&slob_rcu->head, kmem_rcu_free);
 	} else {
diff --git a/mm/slub.c b/mm/slub.c
index 578f68f3c51..13fffe1f0f3 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -17,7 +17,6 @@
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/kmemtrace.h>
 #include <linux/kmemcheck.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
@@ -107,11 +106,17 @@
  * 			the fast path and disables lockless freelists.
  */
 
+#define SLAB_DEBUG_FLAGS (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \
+		SLAB_TRACE | SLAB_DEBUG_FREE)
+
+static inline int kmem_cache_debug(struct kmem_cache *s)
+{
 #ifdef CONFIG_SLUB_DEBUG
-#define SLABDEBUG 1
+	return unlikely(s->flags & SLAB_DEBUG_FLAGS);
 #else
-#define SLABDEBUG 0
+	return 0;
 #endif
+}
 
 /*
  * Issues still to be resolved:
@@ -162,8 +167,8 @@
 #define MAX_OBJS_PER_PAGE	65535 /* since page.objects is u16 */
 
 /* Internal SLUB flags */
-#define __OBJECT_POISON		0x80000000 /* Poison object */
-#define __SYSFS_ADD_DEFERRED	0x40000000 /* Not yet visible via sysfs */
+#define __OBJECT_POISON		0x80000000UL /* Poison object */
+#define __SYSFS_ADD_DEFERRED	0x40000000UL /* Not yet visible via sysfs */
 
 static int kmem_size = sizeof(struct kmem_cache);
 
@@ -1073,7 +1078,7 @@ static inline struct page *alloc_slab_page(gfp_t flags, int node,
 
 	flags |= __GFP_NOTRACK;
 
-	if (node == -1)
+	if (node == NUMA_NO_NODE)
 		return alloc_pages(flags, order);
 	else
 		return alloc_pages_exact_node(node, flags, order);
@@ -1157,9 +1162,6 @@ static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
 	inc_slabs_node(s, page_to_nid(page), page->objects);
 	page->slab = s;
 	page->flags |= 1 << PG_slab;
-	if (s->flags & (SLAB_DEBUG_FREE | SLAB_RED_ZONE | SLAB_POISON |
-			SLAB_STORE_USER | SLAB_TRACE))
-		__SetPageSlubDebug(page);
 
 	start = page_address(page);
 
@@ -1186,14 +1188,13 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
 	int order = compound_order(page);
 	int pages = 1 << order;
 
-	if (unlikely(SLABDEBUG && PageSlubDebug(page))) {
+	if (kmem_cache_debug(s)) {
 		void *p;
 
 		slab_pad_check(s, page);
 		for_each_object(p, s, page_address(page),
 						page->objects)
 			check_object(s, page, p, 0);
-		__ClearPageSlubDebug(page);
 	}
 
 	kmemcheck_free_shadow(page, compound_order(page));
@@ -1387,10 +1388,10 @@ static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags)
 static struct page *get_partial(struct kmem_cache *s, gfp_t flags, int node)
 {
 	struct page *page;
-	int searchnode = (node == -1) ? numa_node_id() : node;
+	int searchnode = (node == NUMA_NO_NODE) ? numa_node_id() : node;
 
 	page = get_partial_node(get_node(s, searchnode));
-	if (page || (flags & __GFP_THISNODE))
+	if (page || node != -1)
 		return page;
 
 	return get_any_partial(s, flags);
@@ -1415,8 +1416,7 @@ static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail)
 			stat(s, tail ? DEACTIVATE_TO_TAIL : DEACTIVATE_TO_HEAD);
 		} else {
 			stat(s, DEACTIVATE_FULL);
-			if (SLABDEBUG && PageSlubDebug(page) &&
-						(s->flags & SLAB_STORE_USER))
+			if (kmem_cache_debug(s) && (s->flags & SLAB_STORE_USER))
 				add_full(n, page);
 		}
 		slab_unlock(page);
@@ -1515,7 +1515,7 @@ static void flush_all(struct kmem_cache *s)
 static inline int node_match(struct kmem_cache_cpu *c, int node)
 {
 #ifdef CONFIG_NUMA
-	if (node != -1 && c->node != node)
+	if (node != NUMA_NO_NODE && c->node != node)
 		return 0;
 #endif
 	return 1;
@@ -1624,7 +1624,7 @@ load_freelist:
 	object = c->page->freelist;
 	if (unlikely(!object))
 		goto another_slab;
-	if (unlikely(SLABDEBUG && PageSlubDebug(c->page)))
+	if (kmem_cache_debug(s))
 		goto debug;
 
 	c->freelist = get_freepointer(s, object);
@@ -1727,7 +1727,7 @@ static __always_inline void *slab_alloc(struct kmem_cache *s,
 
 void *kmem_cache_alloc(struct kmem_cache *s, gfp_t gfpflags)
 {
-	void *ret = slab_alloc(s, gfpflags, -1, _RET_IP_);
+	void *ret = slab_alloc(s, gfpflags, NUMA_NO_NODE, _RET_IP_);
 
 	trace_kmem_cache_alloc(_RET_IP_, ret, s->objsize, s->size, gfpflags);
 
@@ -1738,7 +1738,7 @@ EXPORT_SYMBOL(kmem_cache_alloc);
 #ifdef CONFIG_TRACING
 void *kmem_cache_alloc_notrace(struct kmem_cache *s, gfp_t gfpflags)
 {
-	return slab_alloc(s, gfpflags, -1, _RET_IP_);
+	return slab_alloc(s, gfpflags, NUMA_NO_NODE, _RET_IP_);
 }
 EXPORT_SYMBOL(kmem_cache_alloc_notrace);
 #endif
@@ -1783,7 +1783,7 @@ static void __slab_free(struct kmem_cache *s, struct page *page,
 	stat(s, FREE_SLOWPATH);
 	slab_lock(page);
 
-	if (unlikely(SLABDEBUG && PageSlubDebug(page)))
+	if (kmem_cache_debug(s))
 		goto debug;
 
 checks_ok:
@@ -2490,7 +2490,6 @@ void kmem_cache_destroy(struct kmem_cache *s)
 	s->refcount--;
 	if (!s->refcount) {
 		list_del(&s->list);
-		up_write(&slub_lock);
 		if (kmem_cache_close(s)) {
 			printk(KERN_ERR "SLUB %s: %s called for cache that "
 				"still has objects.\n", s->name, __func__);
@@ -2499,8 +2498,8 @@ void kmem_cache_destroy(struct kmem_cache *s)
 		if (s->flags & SLAB_DESTROY_BY_RCU)
 			rcu_barrier();
 		sysfs_slab_remove(s);
-	} else
-		up_write(&slub_lock);
+	}
+	up_write(&slub_lock);
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
 
@@ -2728,7 +2727,7 @@ void *__kmalloc(size_t size, gfp_t flags)
 	if (unlikely(ZERO_OR_NULL_PTR(s)))
 		return s;
 
-	ret = slab_alloc(s, flags, -1, _RET_IP_);
+	ret = slab_alloc(s, flags, NUMA_NO_NODE, _RET_IP_);
 
 	trace_kmalloc(_RET_IP_, ret, size, s->size, flags);
 
@@ -3118,9 +3117,12 @@ void __init kmem_cache_init(void)
 	slab_state = UP;
 
 	/* Provide the correct kmalloc names now that the caches are up */
-	for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++)
-		kmalloc_caches[i]. name =
-			kasprintf(GFP_NOWAIT, "kmalloc-%d", 1 << i);
+	for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++) {
+		char *s = kasprintf(GFP_NOWAIT, "kmalloc-%d", 1 << i);
+
+		BUG_ON(!s);
+		kmalloc_caches[i].name = s;
+	}
 
 #ifdef CONFIG_SMP
 	register_cpu_notifier(&slab_notifier);
@@ -3223,14 +3225,12 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 		 */
 		s->objsize = max(s->objsize, (int)size);
 		s->inuse = max_t(int, s->inuse, ALIGN(size, sizeof(void *)));
-		up_write(&slub_lock);
 
 		if (sysfs_slab_alias(s, name)) {
-			down_write(&slub_lock);
 			s->refcount--;
-			up_write(&slub_lock);
 			goto err;
 		}
+		up_write(&slub_lock);
 		return s;
 	}
 
@@ -3239,14 +3239,12 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 		if (kmem_cache_open(s, GFP_KERNEL, name,
 				size, align, flags, ctor)) {
 			list_add(&s->list, &slab_caches);
-			up_write(&slub_lock);
 			if (sysfs_slab_add(s)) {
-				down_write(&slub_lock);
 				list_del(&s->list);
-				up_write(&slub_lock);
 				kfree(s);
 				goto err;
 			}
+			up_write(&slub_lock);
 			return s;
 		}
 		kfree(s);
@@ -3312,7 +3310,7 @@ void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller)
 	if (unlikely(ZERO_OR_NULL_PTR(s)))
 		return s;
 
-	ret = slab_alloc(s, gfpflags, -1, caller);
+	ret = slab_alloc(s, gfpflags, NUMA_NO_NODE, caller);
 
 	/* Honor the call site pointer we recieved. */
 	trace_kmalloc(caller, ret, size, s->size, gfpflags);
@@ -3395,16 +3393,6 @@ static void validate_slab_slab(struct kmem_cache *s, struct page *page,
 	} else
 		printk(KERN_INFO "SLUB %s: Skipped busy slab 0x%p\n",
 			s->name, page);
-
-	if (s->flags & DEBUG_DEFAULT_FLAGS) {
-		if (!PageSlubDebug(page))
-			printk(KERN_ERR "SLUB %s: SlubDebug not set "
-				"on slab 0x%p\n", s->name, page);
-	} else {
-		if (PageSlubDebug(page))
-			printk(KERN_ERR "SLUB %s: SlubDebug set on "
-				"slab 0x%p\n", s->name, page);
-	}
 }
 
 static int validate_slab_node(struct kmem_cache *s,
@@ -4504,6 +4492,13 @@ static int sysfs_slab_add(struct kmem_cache *s)
 
 static void sysfs_slab_remove(struct kmem_cache *s)
 {
+	if (slab_state < SYSFS)
+		/*
+		 * Sysfs has not been setup yet so no need to remove the
+		 * cache from sysfs.
+		 */
+		return;
+
 	kobject_uevent(&s->kobj, KOBJ_REMOVE);
 	kobject_del(&s->kobj);
 	kobject_put(&s->kobj);
@@ -4549,8 +4544,11 @@ static int __init slab_sysfs_init(void)
 	struct kmem_cache *s;
 	int err;
 
+	down_write(&slub_lock);
+
 	slab_kset = kset_create_and_add("slab", &slab_uevent_ops, kernel_kobj);
 	if (!slab_kset) {
+		up_write(&slub_lock);
 		printk(KERN_ERR "Cannot register slab subsystem.\n");
 		return -ENOSYS;
 	}
@@ -4575,6 +4573,7 @@ static int __init slab_sysfs_init(void)
 		kfree(al);
 	}
 
+	up_write(&slub_lock);
 	resiliency_test();
 	return 0;
 }
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 03aa2d55f1a..1f3f9c59a73 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -47,6 +47,8 @@ long nr_swap_pages;
 long total_swap_pages;
 static int least_priority;
 
+static bool swap_for_hibernation;
+
 static const char Bad_file[] = "Bad swap file entry ";
 static const char Unused_file[] = "Unused swap file entry ";
 static const char Bad_offset[] = "Bad swap offset entry ";
@@ -318,8 +320,10 @@ checks:
 	if (offset > si->highest_bit)
 		scan_base = offset = si->lowest_bit;
 
-	/* reuse swap entry of cache-only swap if not busy. */
-	if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
+	/* reuse swap entry of cache-only swap if not hibernation. */
+	if (vm_swap_full()
+		&& usage == SWAP_HAS_CACHE
+		&& si->swap_map[offset] == SWAP_HAS_CACHE) {
 		int swap_was_freed;
 		spin_unlock(&swap_lock);
 		swap_was_freed = __try_to_reclaim_swap(si, offset);
@@ -449,6 +453,8 @@ swp_entry_t get_swap_page(void)
 	spin_lock(&swap_lock);
 	if (nr_swap_pages <= 0)
 		goto noswap;
+	if (swap_for_hibernation)
+		goto noswap;
 	nr_swap_pages--;
 
 	for (type = swap_list.next; type >= 0 && wrapped < 2; type = next) {
@@ -481,28 +487,6 @@ noswap:
 	return (swp_entry_t) {0};
 }
 
-/* The only caller of this function is now susupend routine */
-swp_entry_t get_swap_page_of_type(int type)
-{
-	struct swap_info_struct *si;
-	pgoff_t offset;
-
-	spin_lock(&swap_lock);
-	si = swap_info[type];
-	if (si && (si->flags & SWP_WRITEOK)) {
-		nr_swap_pages--;
-		/* This is called for allocating swap entry, not cache */
-		offset = scan_swap_map(si, 1);
-		if (offset) {
-			spin_unlock(&swap_lock);
-			return swp_entry(type, offset);
-		}
-		nr_swap_pages++;
-	}
-	spin_unlock(&swap_lock);
-	return (swp_entry_t) {0};
-}
-
 static struct swap_info_struct *swap_info_get(swp_entry_t entry)
 {
 	struct swap_info_struct *p;
@@ -762,6 +746,74 @@ int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
 #endif
 
 #ifdef CONFIG_HIBERNATION
+
+static pgoff_t hibernation_offset[MAX_SWAPFILES];
+/*
+ * Once hibernation starts to use swap, we freeze swap_map[]. Otherwise,
+ * saved swap_map[] image to the disk will be an incomplete because it's
+ * changing without synchronization with hibernation snap shot.
+ * At resume, we just make swap_for_hibernation=false. We can forget
+ * used maps easily.
+ */
+void hibernation_freeze_swap(void)
+{
+	int i;
+
+	spin_lock(&swap_lock);
+
+	printk(KERN_INFO "PM: Freeze Swap\n");
+	swap_for_hibernation = true;
+	for (i = 0; i < MAX_SWAPFILES; i++)
+		hibernation_offset[i] = 1;
+	spin_unlock(&swap_lock);
+}
+
+void hibernation_thaw_swap(void)
+{
+	spin_lock(&swap_lock);
+	if (swap_for_hibernation) {
+		printk(KERN_INFO "PM: Thaw Swap\n");
+		swap_for_hibernation = false;
+	}
+	spin_unlock(&swap_lock);
+}
+
+/*
+ * Because updateing swap_map[] can make not-saved-status-change,
+ * we use our own easy allocator.
+ * Please see kernel/power/swap.c, Used swaps are recorded into
+ * RB-tree.
+ */
+swp_entry_t get_swap_for_hibernation(int type)
+{
+	pgoff_t off;
+	swp_entry_t val = {0};
+	struct swap_info_struct *si;
+
+	spin_lock(&swap_lock);
+
+	si = swap_info[type];
+	if (!si || !(si->flags & SWP_WRITEOK))
+		goto done;
+
+	for (off = hibernation_offset[type]; off < si->max; ++off) {
+		if (!si->swap_map[off])
+			break;
+	}
+	if (off < si->max) {
+		val = swp_entry(type, off);
+		hibernation_offset[type] = off + 1;
+	}
+done:
+	spin_unlock(&swap_lock);
+	return val;
+}
+
+void swap_free_for_hibernation(swp_entry_t ent)
+{
+	/* Nothing to do */
+}
+
 /*
  * Find the swap type that corresponds to given device (if any).
  *
diff --git a/mm/util.c b/mm/util.c
index f5712e8964b..4735ea48181 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -225,15 +225,10 @@ char *strndup_user(const char __user *s, long n)
 	if (length > n)
 		return ERR_PTR(-EINVAL);
 
-	p = kmalloc(length, GFP_KERNEL);
+	p = memdup_user(s, length);
 
-	if (!p)
-		return ERR_PTR(-ENOMEM);
-
-	if (copy_from_user(p, s, length)) {
-		kfree(p);
-		return ERR_PTR(-EFAULT);
-	}
+	if (IS_ERR(p))
+		return p;
 
 	p[length - 1] = '\0';
 
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index ae007462b7f..918c51335d6 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -732,7 +732,7 @@ static struct vmap_block *new_vmap_block(gfp_t gfp_mask)
 					node, gfp_mask);
 	if (unlikely(IS_ERR(va))) {
 		kfree(vb);
-		return ERR_PTR(PTR_ERR(va));
+		return ERR_CAST(va);
 	}
 
 	err = radix_tree_preload(gfp_mask);
@@ -2403,7 +2403,7 @@ static int s_show(struct seq_file *m, void *p)
 		seq_printf(m, " pages=%d", v->nr_pages);
 
 	if (v->phys_addr)
-		seq_printf(m, " phys=%lx", v->phys_addr);
+		seq_printf(m, " phys=%llx", (unsigned long long)v->phys_addr);
 
 	if (v->flags & VM_IOREMAP)
 		seq_printf(m, " ioremap");
@@ -2437,8 +2437,11 @@ static int vmalloc_open(struct inode *inode, struct file *file)
 	unsigned int *ptr = NULL;
 	int ret;
 
-	if (NUMA_BUILD)
+	if (NUMA_BUILD) {
 		ptr = kmalloc(nr_node_ids * sizeof(unsigned int), GFP_KERNEL);
+		if (ptr == NULL)
+			return -ENOMEM;
+	}
 	ret = seq_open(file, &vmalloc_op);
 	if (!ret) {
 		struct seq_file *m = file->private_data;
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b94fe1b3da4..ec5ddccbf82 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -48,6 +48,9 @@
 
 #include "internal.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/vmscan.h>
+
 struct scan_control {
 	/* Incremented by the number of inactive pages that were scanned */
 	unsigned long nr_scanned;
@@ -398,6 +401,8 @@ static pageout_t pageout(struct page *page, struct address_space *mapping,
 			/* synchronous write or broken a_ops? */
 			ClearPageReclaim(page);
 		}
+		trace_mm_vmscan_writepage(page,
+			trace_reclaim_flags(page, sync_writeback));
 		inc_zone_page_state(page, NR_VMSCAN_WRITE);
 		return PAGE_SUCCESS;
 	}
@@ -617,6 +622,24 @@ static enum page_references page_check_references(struct page *page,
 	return PAGEREF_RECLAIM;
 }
 
+static noinline_for_stack void free_page_list(struct list_head *free_pages)
+{
+	struct pagevec freed_pvec;
+	struct page *page, *tmp;
+
+	pagevec_init(&freed_pvec, 1);
+
+	list_for_each_entry_safe(page, tmp, free_pages, lru) {
+		list_del(&page->lru);
+		if (!pagevec_add(&freed_pvec, page)) {
+			__pagevec_free(&freed_pvec);
+			pagevec_reinit(&freed_pvec);
+		}
+	}
+
+	pagevec_free(&freed_pvec);
+}
+
 /*
  * shrink_page_list() returns the number of reclaimed pages
  */
@@ -625,13 +648,12 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 					enum pageout_io sync_writeback)
 {
 	LIST_HEAD(ret_pages);
-	struct pagevec freed_pvec;
+	LIST_HEAD(free_pages);
 	int pgactivate = 0;
 	unsigned long nr_reclaimed = 0;
 
 	cond_resched();
 
-	pagevec_init(&freed_pvec, 1);
 	while (!list_empty(page_list)) {
 		enum page_references references;
 		struct address_space *mapping;
@@ -806,10 +828,12 @@ static unsigned long shrink_page_list(struct list_head *page_list,
 		__clear_page_locked(page);
 free_it:
 		nr_reclaimed++;
-		if (!pagevec_add(&freed_pvec, page)) {
-			__pagevec_free(&freed_pvec);
-			pagevec_reinit(&freed_pvec);
-		}
+
+		/*
+		 * Is there need to periodically free_page_list? It would
+		 * appear not as the counts should be low
+		 */
+		list_add(&page->lru, &free_pages);
 		continue;
 
 cull_mlocked:
@@ -832,9 +856,10 @@ keep:
 		list_add(&page->lru, &ret_pages);
 		VM_BUG_ON(PageLRU(page) || PageUnevictable(page));
 	}
+
+	free_page_list(&free_pages);
+
 	list_splice(&ret_pages, page_list);
-	if (pagevec_count(&freed_pvec))
-		__pagevec_free(&freed_pvec);
 	count_vm_events(PGACTIVATE, pgactivate);
 	return nr_reclaimed;
 }
@@ -916,6 +941,9 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 		unsigned long *scanned, int order, int mode, int file)
 {
 	unsigned long nr_taken = 0;
+	unsigned long nr_lumpy_taken = 0;
+	unsigned long nr_lumpy_dirty = 0;
+	unsigned long nr_lumpy_failed = 0;
 	unsigned long scan;
 
 	for (scan = 0; scan < nr_to_scan && !list_empty(src); scan++) {
@@ -993,12 +1021,25 @@ static unsigned long isolate_lru_pages(unsigned long nr_to_scan,
 				list_move(&cursor_page->lru, dst);
 				mem_cgroup_del_lru(cursor_page);
 				nr_taken++;
+				nr_lumpy_taken++;
+				if (PageDirty(cursor_page))
+					nr_lumpy_dirty++;
 				scan++;
+			} else {
+				if (mode == ISOLATE_BOTH &&
+						page_count(cursor_page))
+					nr_lumpy_failed++;
 			}
 		}
 	}
 
 	*scanned = scan;
+
+	trace_mm_vmscan_lru_isolate(order,
+			nr_to_scan, scan,
+			nr_taken,
+			nr_lumpy_taken, nr_lumpy_dirty, nr_lumpy_failed,
+			mode);
 	return nr_taken;
 }
 
@@ -1035,7 +1076,8 @@ static unsigned long clear_active_flags(struct list_head *page_list,
 			ClearPageActive(page);
 			nr_active++;
 		}
-		count[lru]++;
+		if (count)
+			count[lru]++;
 	}
 
 	return nr_active;
@@ -1112,174 +1154,212 @@ static int too_many_isolated(struct zone *zone, int file,
 }
 
 /*
- * shrink_inactive_list() is a helper for shrink_zone().  It returns the number
- * of reclaimed pages
+ * TODO: Try merging with migrations version of putback_lru_pages
  */
-static unsigned long shrink_inactive_list(unsigned long max_scan,
-			struct zone *zone, struct scan_control *sc,
-			int priority, int file)
+static noinline_for_stack void
+putback_lru_pages(struct zone *zone, struct scan_control *sc,
+				unsigned long nr_anon, unsigned long nr_file,
+				struct list_head *page_list)
 {
-	LIST_HEAD(page_list);
+	struct page *page;
 	struct pagevec pvec;
-	unsigned long nr_scanned = 0;
-	unsigned long nr_reclaimed = 0;
 	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
-	while (unlikely(too_many_isolated(zone, file, sc))) {
-		congestion_wait(BLK_RW_ASYNC, HZ/10);
+	pagevec_init(&pvec, 1);
 
-		/* We are about to die and free our memory. Return now. */
-		if (fatal_signal_pending(current))
-			return SWAP_CLUSTER_MAX;
+	/*
+	 * Put back any unfreeable pages.
+	 */
+	spin_lock(&zone->lru_lock);
+	while (!list_empty(page_list)) {
+		int lru;
+		page = lru_to_page(page_list);
+		VM_BUG_ON(PageLRU(page));
+		list_del(&page->lru);
+		if (unlikely(!page_evictable(page, NULL))) {
+			spin_unlock_irq(&zone->lru_lock);
+			putback_lru_page(page);
+			spin_lock_irq(&zone->lru_lock);
+			continue;
+		}
+		SetPageLRU(page);
+		lru = page_lru(page);
+		add_page_to_lru_list(zone, page, lru);
+		if (is_active_lru(lru)) {
+			int file = is_file_lru(lru);
+			reclaim_stat->recent_rotated[file]++;
+		}
+		if (!pagevec_add(&pvec, page)) {
+			spin_unlock_irq(&zone->lru_lock);
+			__pagevec_release(&pvec);
+			spin_lock_irq(&zone->lru_lock);
+		}
 	}
+	__mod_zone_page_state(zone, NR_ISOLATED_ANON, -nr_anon);
+	__mod_zone_page_state(zone, NR_ISOLATED_FILE, -nr_file);
 
+	spin_unlock_irq(&zone->lru_lock);
+	pagevec_release(&pvec);
+}
 
-	pagevec_init(&pvec, 1);
+static noinline_for_stack void update_isolated_counts(struct zone *zone,
+					struct scan_control *sc,
+					unsigned long *nr_anon,
+					unsigned long *nr_file,
+					struct list_head *isolated_list)
+{
+	unsigned long nr_active;
+	unsigned int count[NR_LRU_LISTS] = { 0, };
+	struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
 
-	lru_add_drain();
-	spin_lock_irq(&zone->lru_lock);
-	do {
-		struct page *page;
-		unsigned long nr_taken;
-		unsigned long nr_scan;
-		unsigned long nr_freed;
-		unsigned long nr_active;
-		unsigned int count[NR_LRU_LISTS] = { 0, };
-		int mode = sc->lumpy_reclaim_mode ? ISOLATE_BOTH : ISOLATE_INACTIVE;
-		unsigned long nr_anon;
-		unsigned long nr_file;
+	nr_active = clear_active_flags(isolated_list, count);
+	__count_vm_events(PGDEACTIVATE, nr_active);
 
-		if (scanning_global_lru(sc)) {
-			nr_taken = isolate_pages_global(SWAP_CLUSTER_MAX,
-							&page_list, &nr_scan,
-							sc->order, mode,
-							zone, 0, file);
-			zone->pages_scanned += nr_scan;
-			if (current_is_kswapd())
-				__count_zone_vm_events(PGSCAN_KSWAPD, zone,
-						       nr_scan);
-			else
-				__count_zone_vm_events(PGSCAN_DIRECT, zone,
-						       nr_scan);
-		} else {
-			nr_taken = mem_cgroup_isolate_pages(SWAP_CLUSTER_MAX,
-							&page_list, &nr_scan,
-							sc->order, mode,
-							zone, sc->mem_cgroup,
-							0, file);
-			/*
-			 * mem_cgroup_isolate_pages() keeps track of
-			 * scanned pages on its own.
-			 */
-		}
+	__mod_zone_page_state(zone, NR_ACTIVE_FILE,
+			      -count[LRU_ACTIVE_FILE]);
+	__mod_zone_page_state(zone, NR_INACTIVE_FILE,
+			      -count[LRU_INACTIVE_FILE]);
+	__mod_zone_page_state(zone, NR_ACTIVE_ANON,
+			      -count[LRU_ACTIVE_ANON]);
+	__mod_zone_page_state(zone, NR_INACTIVE_ANON,
+			      -count[LRU_INACTIVE_ANON]);
 
-		if (nr_taken == 0)
-			goto done;
+	*nr_anon = count[LRU_ACTIVE_ANON] + count[LRU_INACTIVE_ANON];
+	*nr_file = count[LRU_ACTIVE_FILE] + count[LRU_INACTIVE_FILE];
+	__mod_zone_page_state(zone, NR_ISOLATED_ANON, *nr_anon);
+	__mod_zone_page_state(zone, NR_ISOLATED_FILE, *nr_file);
+
+	reclaim_stat->recent_scanned[0] += *nr_anon;
+	reclaim_stat->recent_scanned[1] += *nr_file;
+}
 
-		nr_active = clear_active_flags(&page_list, count);
-		__count_vm_events(PGDEACTIVATE, nr_active);
+/*
+ * Returns true if the caller should wait to clean dirty/writeback pages.
+ *
+ * If we are direct reclaiming for contiguous pages and we do not reclaim
+ * everything in the list, try again and wait for writeback IO to complete.
+ * This will stall high-order allocations noticeably. Only do that when really
+ * need to free the pages under high memory pressure.
+ */
+static inline bool should_reclaim_stall(unsigned long nr_taken,
+					unsigned long nr_freed,
+					int priority,
+					struct scan_control *sc)
+{
+	int lumpy_stall_priority;
 
-		__mod_zone_page_state(zone, NR_ACTIVE_FILE,
-						-count[LRU_ACTIVE_FILE]);
-		__mod_zone_page_state(zone, NR_INACTIVE_FILE,
-						-count[LRU_INACTIVE_FILE]);
-		__mod_zone_page_state(zone, NR_ACTIVE_ANON,
-						-count[LRU_ACTIVE_ANON]);
-		__mod_zone_page_state(zone, NR_INACTIVE_ANON,
-						-count[LRU_INACTIVE_ANON]);
+	/* kswapd should not stall on sync IO */
+	if (current_is_kswapd())
+		return false;
 
-		nr_anon = count[LRU_ACTIVE_ANON] + count[LRU_INACTIVE_ANON];
-		nr_file = count[LRU_ACTIVE_FILE] + count[LRU_INACTIVE_FILE];
-		__mod_zone_page_state(zone, NR_ISOLATED_ANON, nr_anon);
-		__mod_zone_page_state(zone, NR_ISOLATED_FILE, nr_file);
+	/* Only stall on lumpy reclaim */
+	if (!sc->lumpy_reclaim_mode)
+		return false;
 
-		reclaim_stat->recent_scanned[0] += nr_anon;
-		reclaim_stat->recent_scanned[1] += nr_file;
+	/* If we have relaimed everything on the isolated list, no stall */
+	if (nr_freed == nr_taken)
+		return false;
 
-		spin_unlock_irq(&zone->lru_lock);
+	/*
+	 * For high-order allocations, there are two stall thresholds.
+	 * High-cost allocations stall immediately where as lower
+	 * order allocations such as stacks require the scanning
+	 * priority to be much higher before stalling.
+	 */
+	if (sc->order > PAGE_ALLOC_COSTLY_ORDER)
+		lumpy_stall_priority = DEF_PRIORITY;
+	else
+		lumpy_stall_priority = DEF_PRIORITY / 3;
+
+	return priority <= lumpy_stall_priority;
+}
+
+/*
+ * shrink_inactive_list() is a helper for shrink_zone().  It returns the number
+ * of reclaimed pages
+ */
+static noinline_for_stack unsigned long
+shrink_inactive_list(unsigned long nr_to_scan, struct zone *zone,
+			struct scan_control *sc, int priority, int file)
+{
+	LIST_HEAD(page_list);
+	unsigned long nr_scanned;
+	unsigned long nr_reclaimed = 0;
+	unsigned long nr_taken;
+	unsigned long nr_active;
+	unsigned long nr_anon;
+	unsigned long nr_file;
 
-		nr_scanned += nr_scan;
-		nr_freed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC);
+	while (unlikely(too_many_isolated(zone, file, sc))) {
+		congestion_wait(BLK_RW_ASYNC, HZ/10);
+
+		/* We are about to die and free our memory. Return now. */
+		if (fatal_signal_pending(current))
+			return SWAP_CLUSTER_MAX;
+	}
 
+
+	lru_add_drain();
+	spin_lock_irq(&zone->lru_lock);
+
+	if (scanning_global_lru(sc)) {
+		nr_taken = isolate_pages_global(nr_to_scan,
+			&page_list, &nr_scanned, sc->order,
+			sc->lumpy_reclaim_mode ?
+				ISOLATE_BOTH : ISOLATE_INACTIVE,
+			zone, 0, file);
+		zone->pages_scanned += nr_scanned;
+		if (current_is_kswapd())
+			__count_zone_vm_events(PGSCAN_KSWAPD, zone,
+					       nr_scanned);
+		else
+			__count_zone_vm_events(PGSCAN_DIRECT, zone,
+					       nr_scanned);
+	} else {
+		nr_taken = mem_cgroup_isolate_pages(nr_to_scan,
+			&page_list, &nr_scanned, sc->order,
+			sc->lumpy_reclaim_mode ?
+				ISOLATE_BOTH : ISOLATE_INACTIVE,
+			zone, sc->mem_cgroup,
+			0, file);
 		/*
-		 * If we are direct reclaiming for contiguous pages and we do
-		 * not reclaim everything in the list, try again and wait
-		 * for IO to complete. This will stall high-order allocations
-		 * but that should be acceptable to the caller
+		 * mem_cgroup_isolate_pages() keeps track of
+		 * scanned pages on its own.
 		 */
-		if (nr_freed < nr_taken && !current_is_kswapd() &&
-		    sc->lumpy_reclaim_mode) {
-			congestion_wait(BLK_RW_ASYNC, HZ/10);
+	}
 
-			/*
-			 * The attempt at page out may have made some
-			 * of the pages active, mark them inactive again.
-			 */
-			nr_active = clear_active_flags(&page_list, count);
-			count_vm_events(PGDEACTIVATE, nr_active);
+	if (nr_taken == 0) {
+		spin_unlock_irq(&zone->lru_lock);
+		return 0;
+	}
 
-			nr_freed += shrink_page_list(&page_list, sc,
-							PAGEOUT_IO_SYNC);
-		}
+	update_isolated_counts(zone, sc, &nr_anon, &nr_file, &page_list);
 
-		nr_reclaimed += nr_freed;
+	spin_unlock_irq(&zone->lru_lock);
 
-		local_irq_disable();
-		if (current_is_kswapd())
-			__count_vm_events(KSWAPD_STEAL, nr_freed);
-		__count_zone_vm_events(PGSTEAL, zone, nr_freed);
+	nr_reclaimed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC);
+
+	/* Check if we should syncronously wait for writeback */
+	if (should_reclaim_stall(nr_taken, nr_reclaimed, priority, sc)) {
+		congestion_wait(BLK_RW_ASYNC, HZ/10);
 
-		spin_lock(&zone->lru_lock);
 		/*
-		 * Put back any unfreeable pages.
+		 * The attempt at page out may have made some
+		 * of the pages active, mark them inactive again.
 		 */
-		while (!list_empty(&page_list)) {
-			int lru;
-			page = lru_to_page(&page_list);
-			VM_BUG_ON(PageLRU(page));
-			list_del(&page->lru);
-			if (unlikely(!page_evictable(page, NULL))) {
-				spin_unlock_irq(&zone->lru_lock);
-				putback_lru_page(page);
-				spin_lock_irq(&zone->lru_lock);
-				continue;
-			}
-			SetPageLRU(page);
-			lru = page_lru(page);
-			add_page_to_lru_list(zone, page, lru);
-			if (is_active_lru(lru)) {
-				int file = is_file_lru(lru);
-				reclaim_stat->recent_rotated[file]++;
-			}
-			if (!pagevec_add(&pvec, page)) {
-				spin_unlock_irq(&zone->lru_lock);
-				__pagevec_release(&pvec);
-				spin_lock_irq(&zone->lru_lock);
-			}
-		}
-		__mod_zone_page_state(zone, NR_ISOLATED_ANON, -nr_anon);
-		__mod_zone_page_state(zone, NR_ISOLATED_FILE, -nr_file);
+		nr_active = clear_active_flags(&page_list, NULL);
+		count_vm_events(PGDEACTIVATE, nr_active);
 
-  	} while (nr_scanned < max_scan);
+		nr_reclaimed += shrink_page_list(&page_list, sc, PAGEOUT_IO_SYNC);
+	}
 
-done:
-	spin_unlock_irq(&zone->lru_lock);
-	pagevec_release(&pvec);
-	return nr_reclaimed;
-}
+	local_irq_disable();
+	if (current_is_kswapd())
+		__count_vm_events(KSWAPD_STEAL, nr_reclaimed);
+	__count_zone_vm_events(PGSTEAL, zone, nr_reclaimed);
 
-/*
- * We are about to scan this zone at a certain priority level.  If that priority
- * level is smaller (ie: more urgent) than the previous priority, then note
- * that priority level within the zone.  This is done so that when the next
- * process comes in to scan this zone, it will immediately start out at this
- * priority level rather than having to build up its own scanning priority.
- * Here, this priority affects only the reclaim-mapped threshold.
- */
-static inline void note_zone_scanning_priority(struct zone *zone, int priority)
-{
-	if (priority < zone->prev_priority)
-		zone->prev_priority = priority;
+	putback_lru_pages(zone, sc, nr_anon, nr_file, &page_list);
+	return nr_reclaimed;
 }
 
 /*
@@ -1583,6 +1663,13 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc,
 	}
 
 	/*
+	 * With swappiness at 100, anonymous and file have the same priority.
+	 * This scanning priority is essentially the inverse of IO cost.
+	 */
+	anon_prio = sc->swappiness;
+	file_prio = 200 - sc->swappiness;
+
+	/*
 	 * OK, so we have swap space and a fair amount of page cache
 	 * pages.  We use the recently rotated / recently scanned
 	 * ratios to determine how valuable each cache is.
@@ -1593,28 +1680,18 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc,
 	 *
 	 * anon in [0], file in [1]
 	 */
+	spin_lock_irq(&zone->lru_lock);
 	if (unlikely(reclaim_stat->recent_scanned[0] > anon / 4)) {
-		spin_lock_irq(&zone->lru_lock);
 		reclaim_stat->recent_scanned[0] /= 2;
 		reclaim_stat->recent_rotated[0] /= 2;
-		spin_unlock_irq(&zone->lru_lock);
 	}
 
 	if (unlikely(reclaim_stat->recent_scanned[1] > file / 4)) {
-		spin_lock_irq(&zone->lru_lock);
 		reclaim_stat->recent_scanned[1] /= 2;
 		reclaim_stat->recent_rotated[1] /= 2;
-		spin_unlock_irq(&zone->lru_lock);
 	}
 
 	/*
-	 * With swappiness at 100, anonymous and file have the same priority.
-	 * This scanning priority is essentially the inverse of IO cost.
-	 */
-	anon_prio = sc->swappiness;
-	file_prio = 200 - sc->swappiness;
-
-	/*
 	 * The amount of pressure on anon vs file pages is inversely
 	 * proportional to the fraction of recently scanned pages on
 	 * each list that were recently referenced and in active use.
@@ -1624,6 +1701,7 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc,
 
 	fp = (file_prio + 1) * (reclaim_stat->recent_scanned[1] + 1);
 	fp /= reclaim_stat->recent_rotated[1] + 1;
+	spin_unlock_irq(&zone->lru_lock);
 
 	fraction[0] = ap;
 	fraction[1] = fp;
@@ -1729,13 +1807,12 @@ static void shrink_zone(int priority, struct zone *zone,
 static bool shrink_zones(int priority, struct zonelist *zonelist,
 					struct scan_control *sc)
 {
-	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 	struct zoneref *z;
 	struct zone *zone;
 	bool all_unreclaimable = true;
 
-	for_each_zone_zonelist_nodemask(zone, z, zonelist, high_zoneidx,
-					sc->nodemask) {
+	for_each_zone_zonelist_nodemask(zone, z, zonelist,
+					gfp_zone(sc->gfp_mask), sc->nodemask) {
 		if (!populated_zone(zone))
 			continue;
 		/*
@@ -1745,17 +1822,8 @@ static bool shrink_zones(int priority, struct zonelist *zonelist,
 		if (scanning_global_lru(sc)) {
 			if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
 				continue;
-			note_zone_scanning_priority(zone, priority);
-
 			if (zone->all_unreclaimable && priority != DEF_PRIORITY)
 				continue;	/* Let kswapd poll it */
-		} else {
-			/*
-			 * Ignore cpuset limitation here. We just want to reduce
-			 * # of used pages by us regardless of memory shortage.
-			 */
-			mem_cgroup_note_reclaim_priority(sc->mem_cgroup,
-							priority);
 		}
 
 		shrink_zone(priority, zone, sc);
@@ -1787,10 +1855,8 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 	bool all_unreclaimable;
 	unsigned long total_scanned = 0;
 	struct reclaim_state *reclaim_state = current->reclaim_state;
-	unsigned long lru_pages = 0;
 	struct zoneref *z;
 	struct zone *zone;
-	enum zone_type high_zoneidx = gfp_zone(sc->gfp_mask);
 	unsigned long writeback_threshold;
 
 	get_mems_allowed();
@@ -1798,18 +1864,6 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 
 	if (scanning_global_lru(sc))
 		count_vm_event(ALLOCSTALL);
-	/*
-	 * mem_cgroup will not do shrink_slab.
-	 */
-	if (scanning_global_lru(sc)) {
-		for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
-
-			if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
-				continue;
-
-			lru_pages += zone_reclaimable_pages(zone);
-		}
-	}
 
 	for (priority = DEF_PRIORITY; priority >= 0; priority--) {
 		sc->nr_scanned = 0;
@@ -1821,6 +1875,15 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		 * over limit cgroups
 		 */
 		if (scanning_global_lru(sc)) {
+			unsigned long lru_pages = 0;
+			for_each_zone_zonelist(zone, z, zonelist,
+					gfp_zone(sc->gfp_mask)) {
+				if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
+					continue;
+
+				lru_pages += zone_reclaimable_pages(zone);
+			}
+
 			shrink_slab(sc->nr_scanned, sc->gfp_mask, lru_pages);
 			if (reclaim_state) {
 				sc->nr_reclaimed += reclaim_state->reclaimed_slab;
@@ -1861,17 +1924,6 @@ out:
 	if (priority < 0)
 		priority = 0;
 
-	if (scanning_global_lru(sc)) {
-		for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
-
-			if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
-				continue;
-
-			zone->prev_priority = priority;
-		}
-	} else
-		mem_cgroup_record_reclaim_priority(sc->mem_cgroup, priority);
-
 	delayacct_freepages_end();
 	put_mems_allowed();
 
@@ -1888,6 +1940,7 @@ out:
 unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
 				gfp_t gfp_mask, nodemask_t *nodemask)
 {
+	unsigned long nr_reclaimed;
 	struct scan_control sc = {
 		.gfp_mask = gfp_mask,
 		.may_writepage = !laptop_mode,
@@ -1900,7 +1953,15 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
 		.nodemask = nodemask,
 	};
 
-	return do_try_to_free_pages(zonelist, &sc);
+	trace_mm_vmscan_direct_reclaim_begin(order,
+				sc.may_writepage,
+				gfp_mask);
+
+	nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
+
+	trace_mm_vmscan_direct_reclaim_end(nr_reclaimed);
+
+	return nr_reclaimed;
 }
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
@@ -1925,6 +1986,11 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
 	sc.nodemask = &nm;
 	sc.nr_reclaimed = 0;
 	sc.nr_scanned = 0;
+
+	trace_mm_vmscan_memcg_softlimit_reclaim_begin(0,
+						      sc.may_writepage,
+						      sc.gfp_mask);
+
 	/*
 	 * NOTE: Although we can get the priority field, using it
 	 * here is not a good idea, since it limits the pages we can scan.
@@ -1933,6 +1999,9 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
 	 * the priority and make it zero.
 	 */
 	shrink_zone(0, zone, &sc);
+
+	trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
+
 	return sc.nr_reclaimed;
 }
 
@@ -1942,6 +2011,7 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 					   unsigned int swappiness)
 {
 	struct zonelist *zonelist;
+	unsigned long nr_reclaimed;
 	struct scan_control sc = {
 		.may_writepage = !laptop_mode,
 		.may_unmap = 1,
@@ -1956,7 +2026,16 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 	sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
 			(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
 	zonelist = NODE_DATA(numa_node_id())->node_zonelists;
-	return do_try_to_free_pages(zonelist, &sc);
+
+	trace_mm_vmscan_memcg_reclaim_begin(0,
+					    sc.may_writepage,
+					    sc.gfp_mask);
+
+	nr_reclaimed = do_try_to_free_pages(zonelist, &sc);
+
+	trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
+
+	return nr_reclaimed;
 }
 #endif
 
@@ -2028,22 +2107,12 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order)
 		.order = order,
 		.mem_cgroup = NULL,
 	};
-	/*
-	 * temp_priority is used to remember the scanning priority at which
-	 * this zone was successfully refilled to
-	 * free_pages == high_wmark_pages(zone).
-	 */
-	int temp_priority[MAX_NR_ZONES];
-
 loop_again:
 	total_scanned = 0;
 	sc.nr_reclaimed = 0;
 	sc.may_writepage = !laptop_mode;
 	count_vm_event(PAGEOUTRUN);
 
-	for (i = 0; i < pgdat->nr_zones; i++)
-		temp_priority[i] = DEF_PRIORITY;
-
 	for (priority = DEF_PRIORITY; priority >= 0; priority--) {
 		int end_zone = 0;	/* Inclusive.  0 = ZONE_DMA */
 		unsigned long lru_pages = 0;
@@ -2111,9 +2180,7 @@ loop_again:
 			if (zone->all_unreclaimable && priority != DEF_PRIORITY)
 				continue;
 
-			temp_priority[i] = priority;
 			sc.nr_scanned = 0;
-			note_zone_scanning_priority(zone, priority);
 
 			nid = pgdat->node_id;
 			zid = zone_idx(zone);
@@ -2186,16 +2253,6 @@ loop_again:
 			break;
 	}
 out:
-	/*
-	 * Note within each zone the priority level at which this zone was
-	 * brought into a happy state.  So that the next thread which scans this
-	 * zone will start out at that priority level.
-	 */
-	for (i = 0; i < pgdat->nr_zones; i++) {
-		struct zone *zone = pgdat->node_zones + i;
-
-		zone->prev_priority = temp_priority[i];
-	}
 	if (!all_zones_ok) {
 		cond_resched();
 
@@ -2299,9 +2356,10 @@ static int kswapd(void *p)
 				 * premature sleep. If not, then go fully
 				 * to sleep until explicitly woken up
 				 */
-				if (!sleeping_prematurely(pgdat, order, remaining))
+				if (!sleeping_prematurely(pgdat, order, remaining)) {
+					trace_mm_vmscan_kswapd_sleep(pgdat->node_id);
 					schedule();
-				else {
+				} else {
 					if (remaining)
 						count_vm_event(KSWAPD_LOW_WMARK_HIT_QUICKLY);
 					else
@@ -2321,8 +2379,10 @@ static int kswapd(void *p)
 		 * We can speed up thawing tasks if we don't call balance_pgdat
 		 * after returning from the refrigerator
 		 */
-		if (!ret)
+		if (!ret) {
+			trace_mm_vmscan_kswapd_wake(pgdat->node_id, order);
 			balance_pgdat(pgdat, order);
+		}
 	}
 	return 0;
 }
@@ -2342,6 +2402,7 @@ void wakeup_kswapd(struct zone *zone, int order)
 		return;
 	if (pgdat->kswapd_max_order < order)
 		pgdat->kswapd_max_order = order;
+	trace_mm_vmscan_wakeup_kswapd(pgdat->node_id, zone_idx(zone), order);
 	if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
 		return;
 	if (!waitqueue_active(&pgdat->kswapd_wait))
@@ -2590,9 +2651,8 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 		.swappiness = vm_swappiness,
 		.order = order,
 	};
-	unsigned long slab_reclaimable;
+	unsigned long nr_slab_pages0, nr_slab_pages1;
 
-	disable_swap_token();
 	cond_resched();
 	/*
 	 * We need to be able to allocate from the reserves for RECLAIM_SWAP
@@ -2611,14 +2671,13 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 		 */
 		priority = ZONE_RECLAIM_PRIORITY;
 		do {
-			note_zone_scanning_priority(zone, priority);
 			shrink_zone(priority, zone, &sc);
 			priority--;
 		} while (priority >= 0 && sc.nr_reclaimed < nr_pages);
 	}
 
-	slab_reclaimable = zone_page_state(zone, NR_SLAB_RECLAIMABLE);
-	if (slab_reclaimable > zone->min_slab_pages) {
+	nr_slab_pages0 = zone_page_state(zone, NR_SLAB_RECLAIMABLE);
+	if (nr_slab_pages0 > zone->min_slab_pages) {
 		/*
 		 * shrink_slab() does not currently allow us to determine how
 		 * many pages were freed in this zone. So we take the current
@@ -2629,17 +2688,27 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order)
 		 * Note that shrink_slab will free memory on all zones and may
 		 * take a long time.
 		 */
-		while (shrink_slab(sc.nr_scanned, gfp_mask, order) &&
-			zone_page_state(zone, NR_SLAB_RECLAIMABLE) >
-				slab_reclaimable - nr_pages)
-			;
+		for (;;) {
+			unsigned long lru_pages = zone_reclaimable_pages(zone);
+
+			/* No reclaimable slab or very low memory pressure */
+			if (!shrink_slab(sc.nr_scanned, gfp_mask, lru_pages))
+				break;
+
+			/* Freed enough memory */
+			nr_slab_pages1 = zone_page_state(zone,
+							NR_SLAB_RECLAIMABLE);
+			if (nr_slab_pages1 + nr_pages <= nr_slab_pages0)
+				break;
+		}
 
 		/*
 		 * Update nr_reclaimed by the number of slab pages we
 		 * reclaimed from this zone.
 		 */
-		sc.nr_reclaimed += slab_reclaimable -
-			zone_page_state(zone, NR_SLAB_RECLAIMABLE);
+		nr_slab_pages1 = zone_page_state(zone, NR_SLAB_RECLAIMABLE);
+		if (nr_slab_pages1 < nr_slab_pages0)
+			sc.nr_reclaimed += nr_slab_pages0 - nr_slab_pages1;
 	}
 
 	p->reclaim_state = NULL;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 7759941d4e7..f389168f9a8 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -22,14 +22,14 @@
 DEFINE_PER_CPU(struct vm_event_state, vm_event_states) = {{0}};
 EXPORT_PER_CPU_SYMBOL(vm_event_states);
 
-static void sum_vm_events(unsigned long *ret, const struct cpumask *cpumask)
+static void sum_vm_events(unsigned long *ret)
 {
 	int cpu;
 	int i;
 
 	memset(ret, 0, NR_VM_EVENT_ITEMS * sizeof(unsigned long));
 
-	for_each_cpu(cpu, cpumask) {
+	for_each_online_cpu(cpu) {
 		struct vm_event_state *this = &per_cpu(vm_event_states, cpu);
 
 		for (i = 0; i < NR_VM_EVENT_ITEMS; i++)
@@ -45,7 +45,7 @@ static void sum_vm_events(unsigned long *ret, const struct cpumask *cpumask)
 void all_vm_events(unsigned long *ret)
 {
 	get_online_cpus();
-	sum_vm_events(ret, cpu_online_mask);
+	sum_vm_events(ret);
 	put_online_cpus();
 }
 EXPORT_SYMBOL_GPL(all_vm_events);
@@ -853,11 +853,9 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
 	}
 	seq_printf(m,
 		   "\n  all_unreclaimable: %u"
-		   "\n  prev_priority:     %i"
 		   "\n  start_pfn:         %lu"
 		   "\n  inactive_ratio:    %u",
 		   zone->all_unreclaimable,
-		   zone->prev_priority,
 		   zone->zone_start_pfn,
 		   zone->inactive_ratio);
 	seq_putc(m, '\n');
diff --git a/net/Kconfig b/net/Kconfig
index e24fa0873f3..e330594d370 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -213,6 +213,7 @@ source "net/phonet/Kconfig"
 source "net/ieee802154/Kconfig"
 source "net/sched/Kconfig"
 source "net/dcb/Kconfig"
+source "net/dns_resolver/Kconfig"
 
 config RPS
 	boolean
diff --git a/net/Makefile b/net/Makefile
index 41d420070a3..ea60fbce9b1 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -67,3 +67,4 @@ ifeq ($(CONFIG_NET),y)
 obj-$(CONFIG_SYSCTL)		+= sysctl_net.o
 endif
 obj-$(CONFIG_WIMAX)		+= wimax/
+obj-$(CONFIG_DNS_RESOLVER)	+= dns_resolver/
diff --git a/net/atm/pppoatm.c b/net/atm/pppoatm.c
index e49bb6d948a..e9aced0ec56 100644
--- a/net/atm/pppoatm.c
+++ b/net/atm/pppoatm.c
@@ -260,7 +260,7 @@ static int pppoatm_devppp_ioctl(struct ppp_channel *chan, unsigned int cmd,
 	return -ENOTTY;
 }
 
-static /*const*/ struct ppp_channel_ops pppoatm_ops = {
+static const struct ppp_channel_ops pppoatm_ops = {
 	.start_xmit = pppoatm_send,
 	.ioctl = pppoatm_devppp_ioctl,
 };
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 8303f1c9ef5..c52f091ee6d 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -924,7 +924,7 @@ int hci_register_dev(struct hci_dev *hdev)
 
 	hci_conn_hash_init(hdev);
 
-	INIT_LIST_HEAD(&hdev->blacklist.list);
+	INIT_LIST_HEAD(&hdev->blacklist);
 
 	memset(&hdev->stat, 0, sizeof(struct hci_dev_stats));
 
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 4f170a59593..83acd164d39 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -168,9 +168,8 @@ static int hci_sock_release(struct socket *sock)
 struct bdaddr_list *hci_blacklist_lookup(struct hci_dev *hdev, bdaddr_t *bdaddr)
 {
 	struct list_head *p;
-	struct bdaddr_list *blacklist = &hdev->blacklist;
 
-	list_for_each(p, &blacklist->list) {
+	list_for_each(p, &hdev->blacklist) {
 		struct bdaddr_list *b;
 
 		b = list_entry(p, struct bdaddr_list, list);
@@ -202,7 +201,7 @@ static int hci_blacklist_add(struct hci_dev *hdev, void __user *arg)
 
 	bacpy(&entry->bdaddr, &bdaddr);
 
-	list_add(&entry->list, &hdev->blacklist.list);
+	list_add(&entry->list, &hdev->blacklist);
 
 	return 0;
 }
@@ -210,9 +209,8 @@ static int hci_blacklist_add(struct hci_dev *hdev, void __user *arg)
 int hci_blacklist_clear(struct hci_dev *hdev)
 {
 	struct list_head *p, *n;
-	struct bdaddr_list *blacklist = &hdev->blacklist;
 
-	list_for_each_safe(p, n, &blacklist->list) {
+	list_for_each_safe(p, n, &hdev->blacklist) {
 		struct bdaddr_list *b;
 
 		b = list_entry(p, struct bdaddr_list, list);
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index ce44c47eeac..8fb967beee8 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -439,12 +439,11 @@ static const struct file_operations inquiry_cache_fops = {
 static int blacklist_show(struct seq_file *f, void *p)
 {
 	struct hci_dev *hdev = f->private;
-	struct bdaddr_list *blacklist = &hdev->blacklist;
 	struct list_head *l;
 
 	hci_dev_lock_bh(hdev);
 
-	list_for_each(l, &blacklist->list) {
+	list_for_each(l, &hdev->blacklist) {
 		struct bdaddr_list *b;
 		bdaddr_t bdaddr;
 
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 9ba1e8eee37..3e3cd9d4e52 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2527,6 +2527,10 @@ done:
 		if (pi->imtu != L2CAP_DEFAULT_MTU)
 			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
 
+		if (!(pi->conn->feat_mask & L2CAP_FEAT_ERTM) &&
+				!(pi->conn->feat_mask & L2CAP_FEAT_STREAMING))
+			break;
+
 		rfc.mode            = L2CAP_MODE_BASIC;
 		rfc.txwin_size      = 0;
 		rfc.max_transmit    = 0;
@@ -2534,6 +2538,8 @@ done:
 		rfc.monitor_timeout = 0;
 		rfc.max_pdu_size    = 0;
 
+		l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
+							(unsigned long) &rfc);
 		break;
 
 	case L2CAP_MODE_ERTM:
@@ -2546,6 +2552,9 @@ done:
 		if (L2CAP_DEFAULT_MAX_PDU_SIZE > pi->conn->mtu - 10)
 			rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
 
+		l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
+							(unsigned long) &rfc);
+
 		if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
 			break;
 
@@ -2566,6 +2575,9 @@ done:
 		if (L2CAP_DEFAULT_MAX_PDU_SIZE > pi->conn->mtu - 10)
 			rfc.max_pdu_size = cpu_to_le16(pi->conn->mtu - 10);
 
+		l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
+							(unsigned long) &rfc);
+
 		if (!(pi->conn->feat_mask & L2CAP_FEAT_FCS))
 			break;
 
@@ -2577,9 +2589,6 @@ done:
 		break;
 	}
 
-	l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
-						(unsigned long) &rfc);
-
 	/* FIXME: Need actual value of the flush timeout */
 	//if (flush_to != L2CAP_DEFAULT_FLUSH_TO)
 	//   l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO, 2, pi->flush_to);
@@ -3339,6 +3348,15 @@ static inline int l2cap_information_rsp(struct l2cap_conn *conn, struct l2cap_cm
 
 	del_timer(&conn->info_timer);
 
+	if (result != L2CAP_IR_SUCCESS) {
+		conn->info_state |= L2CAP_INFO_FEAT_MASK_REQ_DONE;
+		conn->info_ident = 0;
+
+		l2cap_conn_start(conn);
+
+		return 0;
+	}
+
 	if (type == L2CAP_IT_FEAT_MASK) {
 		conn->feat_mask = get_unaligned_le32(rsp->data);
 
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index 026205c18b7..befc3a52aa0 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -1183,7 +1183,7 @@ int __init rfcomm_init_ttys(void)
 	return 0;
 }
 
-void __exit rfcomm_cleanup_ttys(void)
+void rfcomm_cleanup_ttys(void)
 {
 	tty_unregister_driver(rfcomm_tty_driver);
 	put_tty_driver(rfcomm_tty_driver);
diff --git a/net/core/dev.c b/net/core/dev.c
index e1c1cdcc2bb..1ae65439144 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2517,6 +2517,7 @@ int netif_rx(struct sk_buff *skb)
 		struct rps_dev_flow voidflow, *rflow = &voidflow;
 		int cpu;
 
+		preempt_disable();
 		rcu_read_lock();
 
 		cpu = get_rps_cpu(skb->dev, skb, &rflow);
@@ -2526,6 +2527,7 @@ int netif_rx(struct sk_buff *skb)
 		ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
 
 		rcu_read_unlock();
+		preempt_enable();
 	}
 #else
 	{
@@ -3072,7 +3074,7 @@ enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	int mac_len;
 	enum gro_result ret;
 
-	if (!(skb->dev->features & NETIF_F_GRO))
+	if (!(skb->dev->features & NETIF_F_GRO) || netpoll_rx_on(skb))
 		goto normal;
 
 	if (skb_is_gso(skb) || skb_has_frags(skb))
@@ -3159,9 +3161,6 @@ __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff *p;
 
-	if (netpoll_rx_on(skb))
-		return GRO_NORMAL;
-
 	for (p = napi->gro_list; p; p = p->next) {
 		NAPI_GRO_CB(p)->same_flow =
 			(p->dev == skb->dev) &&
diff --git a/net/dns_resolver/Kconfig b/net/dns_resolver/Kconfig
new file mode 100644
index 00000000000..50d49f7e047
--- /dev/null
+++ b/net/dns_resolver/Kconfig
@@ -0,0 +1,27 @@
+#
+# Configuration for DNS Resolver
+#
+config DNS_RESOLVER
+	tristate "DNS Resolver support"
+	depends on NET && KEYS
+	help
+	  Saying Y here will include support for the DNS Resolver key type
+	  which can be used to make upcalls to perform DNS lookups in
+	  userspace.
+
+	  DNS Resolver is used to query DNS server for information.  Examples
+	  being resolving a UNC hostname element to an IP address for CIFS or
+	  performing a DNS query for AFSDB records so that AFS can locate a
+	  cell's volume location database servers.
+
+	  DNS Resolver is used by the CIFS and AFS modules, and would support
+	  SMB2 later.  DNS Resolver is supported by the userspace upcall
+	  helper "/sbin/dns.resolver" via /etc/request-key.conf.
+
+	  See <file:Documentation/networking/dns_resolver.txt> for further
+	  information.
+
+	  To compile this as a module, choose M here: the module will be called
+	  dnsresolver.
+
+	  If unsure, say N.
diff --git a/net/dns_resolver/Makefile b/net/dns_resolver/Makefile
new file mode 100644
index 00000000000..c0ef4e71dc4
--- /dev/null
+++ b/net/dns_resolver/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux DNS Resolver.
+#
+
+obj-$(CONFIG_DNS_RESOLVER) += dns_resolver.o
+
+dns_resolver-objs :=  dns_key.o dns_query.o
diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c
new file mode 100644
index 00000000000..400a04d5c9a
--- /dev/null
+++ b/net/dns_resolver/dns_key.c
@@ -0,0 +1,211 @@
+/* Key type used to cache DNS lookups made by the kernel
+ *
+ * See Documentation/networking/dns_resolver.txt
+ *
+ *   Copyright (c) 2007 Igor Mammedov
+ *   Author(s): Igor Mammedov (niallain@gmail.com)
+ *              Steve French (sfrench@us.ibm.com)
+ *              Wang Lei (wang840925@gmail.com)
+ *		David Howells (dhowells@redhat.com)
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/keyctl.h>
+#include <linux/err.h>
+#include <keys/dns_resolver-type.h>
+#include <keys/user-type.h>
+#include "internal.h"
+
+MODULE_DESCRIPTION("DNS Resolver");
+MODULE_AUTHOR("Wang Lei");
+MODULE_LICENSE("GPL");
+
+unsigned dns_resolver_debug;
+module_param_named(debug, dns_resolver_debug, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(debug, "DNS Resolver debugging mask");
+
+const struct cred *dns_resolver_cache;
+
+/*
+ * Instantiate a user defined key for dns_resolver.
+ *
+ * The data must be a NUL-terminated string, with the NUL char accounted in
+ * datalen.
+ *
+ * If the data contains a '#' characters, then we take the clause after each
+ * one to be an option of the form 'key=value'.  The actual data of interest is
+ * the string leading up to the first '#'.  For instance:
+ *
+ *        "ip1,ip2,...#foo=bar"
+ */
+static int
+dns_resolver_instantiate(struct key *key, const void *_data, size_t datalen)
+{
+	struct user_key_payload *upayload;
+	int ret;
+	size_t result_len = 0;
+	const char *data = _data, *opt;
+
+	kenter("%%%d,%s,'%s',%zu",
+	       key->serial, key->description, data, datalen);
+
+	if (datalen <= 1 || !data || data[datalen - 1] != '\0')
+		return -EINVAL;
+	datalen--;
+
+	/* deal with any options embedded in the data */
+	opt = memchr(data, '#', datalen);
+	if (!opt) {
+		kdebug("no options currently supported");
+		return -EINVAL;
+	}
+
+	result_len = datalen;
+	ret = key_payload_reserve(key, result_len);
+	if (ret < 0)
+		return -EINVAL;
+
+	upayload = kmalloc(sizeof(*upayload) + result_len + 1, GFP_KERNEL);
+	if (!upayload) {
+		kleave(" = -ENOMEM");
+		return -ENOMEM;
+	}
+
+	upayload->datalen = result_len;
+	memcpy(upayload->data, data, result_len);
+	upayload->data[result_len] = '\0';
+	rcu_assign_pointer(key->payload.data, upayload);
+
+	kleave(" = 0");
+	return 0;
+}
+
+/*
+ * The description is of the form "[<type>:]<domain_name>"
+ *
+ * The domain name may be a simple name or an absolute domain name (which
+ * should end with a period).  The domain name is case-independent.
+ */
+static int
+dns_resolver_match(const struct key *key, const void *description)
+{
+	int slen, dlen, ret = 0;
+	const char *src = key->description, *dsp = description;
+
+	kenter("%s,%s", src, dsp);
+
+	if (!src || !dsp)
+		goto no_match;
+
+	if (strcasecmp(src, dsp) == 0)
+		goto matched;
+
+	slen = strlen(src);
+	dlen = strlen(dsp);
+	if (slen <= 0 || dlen <= 0)
+		goto no_match;
+	if (src[slen - 1] == '.')
+		slen--;
+	if (dsp[dlen - 1] == '.')
+		dlen--;
+	if (slen != dlen || strncasecmp(src, dsp, slen) != 0)
+		goto no_match;
+
+matched:
+	ret = 1;
+no_match:
+	kleave(" = %d", ret);
+	return ret;
+}
+
+struct key_type key_type_dns_resolver = {
+	.name		= "dns_resolver",
+	.instantiate	= dns_resolver_instantiate,
+	.match		= dns_resolver_match,
+	.revoke		= user_revoke,
+	.destroy	= user_destroy,
+	.describe	= user_describe,
+	.read		= user_read,
+};
+
+static int __init init_dns_resolver(void)
+{
+	struct cred *cred;
+	struct key *keyring;
+	int ret;
+
+	printk(KERN_NOTICE "Registering the %s key type\n",
+	       key_type_dns_resolver.name);
+
+	/* create an override credential set with a special thread keyring in
+	 * which DNS requests are cached
+	 *
+	 * this is used to prevent malicious redirections from being installed
+	 * with add_key().
+	 */
+	cred = prepare_kernel_cred(NULL);
+	if (!cred)
+		return -ENOMEM;
+
+	keyring = key_alloc(&key_type_keyring, ".dns_resolver", 0, 0, cred,
+			    (KEY_POS_ALL & ~KEY_POS_SETATTR) |
+			    KEY_USR_VIEW | KEY_USR_READ,
+			    KEY_ALLOC_NOT_IN_QUOTA);
+	if (IS_ERR(keyring)) {
+		ret = PTR_ERR(keyring);
+		goto failed_put_cred;
+	}
+
+	ret = key_instantiate_and_link(keyring, NULL, 0, NULL, NULL);
+	if (ret < 0)
+		goto failed_put_key;
+
+	ret = register_key_type(&key_type_dns_resolver);
+	if (ret < 0)
+		goto failed_put_key;
+
+	/* instruct request_key() to use this special keyring as a cache for
+	 * the results it looks up */
+	cred->thread_keyring = keyring;
+	cred->jit_keyring = KEY_REQKEY_DEFL_THREAD_KEYRING;
+	dns_resolver_cache = cred;
+
+	kdebug("DNS resolver keyring: %d\n", key_serial(keyring));
+	return 0;
+
+failed_put_key:
+	key_put(keyring);
+failed_put_cred:
+	put_cred(cred);
+	return ret;
+}
+
+static void __exit exit_dns_resolver(void)
+{
+	key_revoke(dns_resolver_cache->thread_keyring);
+	unregister_key_type(&key_type_dns_resolver);
+	put_cred(dns_resolver_cache);
+	printk(KERN_NOTICE "Unregistered %s key type\n",
+	       key_type_dns_resolver.name);
+}
+
+module_init(init_dns_resolver)
+module_exit(exit_dns_resolver)
+MODULE_LICENSE("GPL");
diff --git a/net/dns_resolver/dns_query.c b/net/dns_resolver/dns_query.c
new file mode 100644
index 00000000000..03d5255f5cf
--- /dev/null
+++ b/net/dns_resolver/dns_query.c
@@ -0,0 +1,160 @@
+/* Upcall routine, designed to work as a key type and working through
+ * /sbin/request-key to contact userspace when handling DNS queries.
+ *
+ * See Documentation/networking/dns_resolver.txt
+ *
+ *   Copyright (c) 2007 Igor Mammedov
+ *   Author(s): Igor Mammedov (niallain@gmail.com)
+ *              Steve French (sfrench@us.ibm.com)
+ *              Wang Lei (wang840925@gmail.com)
+ *		David Howells (dhowells@redhat.com)
+ *
+ *   The upcall wrapper used to make an arbitrary DNS query.
+ *
+ *   This function requires the appropriate userspace tool dns.upcall to be
+ *   installed and something like the following lines should be added to the
+ *   /etc/request-key.conf file:
+ *
+ *	create dns_resolver * * /sbin/dns.upcall %k
+ *
+ *   For example to use this module to query AFSDB RR:
+ *
+ *	create dns_resolver afsdb:* * /sbin/dns.afsdb %k
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/dns_resolver.h>
+#include <linux/err.h>
+#include <keys/dns_resolver-type.h>
+#include <keys/user-type.h>
+
+#include "internal.h"
+
+/**
+ * dns_query - Query the DNS
+ * @type: Query type (or NULL for straight host->IP lookup)
+ * @name: Name to look up
+ * @namelen: Length of name
+ * @options: Request options (or NULL if no options)
+ * @_result: Where to place the returned data.
+ * @_expiry: Where to store the result expiry time (or NULL)
+ *
+ * The data will be returned in the pointer at *result, and the caller is
+ * responsible for freeing it.
+ *
+ * The description should be of the form "[<query_type>:]<domain_name>", and
+ * the options need to be appropriate for the query type requested.  If no
+ * query_type is given, then the query is a straight hostname to IP address
+ * lookup.
+ *
+ * The DNS resolution lookup is performed by upcalling to userspace by way of
+ * requesting a key of type dns_resolver.
+ *
+ * Returns the size of the result on success, -ve error code otherwise.
+ */
+int dns_query(const char *type, const char *name, size_t namelen,
+	      const char *options, char **_result, time_t *_expiry)
+{
+	struct key *rkey;
+	struct user_key_payload *upayload;
+	const struct cred *saved_cred;
+	size_t typelen, desclen;
+	char *desc, *cp;
+	int ret, len;
+
+	kenter("%s,%*.*s,%zu,%s",
+	       type, (int)namelen, (int)namelen, name, namelen, options);
+
+	if (!name || namelen == 0 || !_result)
+		return -EINVAL;
+
+	/* construct the query key description as "[<type>:]<name>" */
+	typelen = 0;
+	desclen = 0;
+	if (type) {
+		typelen = strlen(type);
+		if (typelen < 1)
+			return -EINVAL;
+		desclen += typelen + 1;
+	}
+
+	if (!namelen)
+		namelen = strlen(name);
+	if (namelen < 3)
+		return -EINVAL;
+	desclen += namelen + 1;
+
+	desc = kmalloc(desclen, GFP_KERNEL);
+	if (!desc)
+		return -ENOMEM;
+
+	cp = desc;
+	if (type) {
+		memcpy(cp, type, typelen);
+		cp += typelen;
+		*cp++ = ':';
+	}
+	memcpy(cp, name, namelen);
+	cp += namelen;
+	*cp = '\0';
+
+	if (!options)
+		options = "";
+	kdebug("call request_key(,%s,%s)", desc, options);
+
+	/* make the upcall, using special credentials to prevent the use of
+	 * add_key() to preinstall malicious redirections
+	 */
+	saved_cred = override_creds(dns_resolver_cache);
+	rkey = request_key(&key_type_dns_resolver, desc, options);
+	revert_creds(saved_cred);
+	kfree(desc);
+	if (IS_ERR(rkey)) {
+		ret = PTR_ERR(rkey);
+		goto out;
+	}
+
+	down_read(&rkey->sem);
+	rkey->perm |= KEY_USR_VIEW;
+
+	ret = key_validate(rkey);
+	if (ret < 0)
+		goto put;
+
+	upayload = rcu_dereference_protected(rkey->payload.data,
+					     lockdep_is_held(&rkey->sem));
+	len = upayload->datalen;
+
+	ret = -ENOMEM;
+	*_result = kmalloc(len + 1, GFP_KERNEL);
+	if (!*_result)
+		goto put;
+
+	memcpy(*_result, upayload->data, len + 1);
+	if (_expiry)
+		*_expiry = rkey->expiry;
+
+	ret = len;
+put:
+	up_read(&rkey->sem);
+	key_put(rkey);
+out:
+	kleave(" = %d", ret);
+	return ret;
+}
+EXPORT_SYMBOL(dns_query);
diff --git a/net/dns_resolver/internal.h b/net/dns_resolver/internal.h
new file mode 100644
index 00000000000..189ca9e9b78
--- /dev/null
+++ b/net/dns_resolver/internal.h
@@ -0,0 +1,44 @@
+/*
+ *   Copyright (c) 2010 Wang Lei
+ *   Author(s): Wang Lei (wang840925@gmail.com). All Rights Reserved.
+ *
+ *   Internal DNS Rsolver stuff
+ *
+ *   This library is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU Lesser General Public License as published
+ *   by the Free Software Foundation; either version 2.1 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This library is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU Lesser General Public License for more details.
+ *
+ *   You should have received a copy of the GNU Lesser General Public License
+ *   along with this library; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+/*
+ * dns_key.c
+ */
+extern const struct cred *dns_resolver_cache;
+
+/*
+ * debug tracing
+ */
+extern unsigned dns_resolver_debug;
+
+#define	kdebug(FMT, ...)				\
+do {							\
+	if (unlikely(dns_resolver_debug))		\
+		printk(KERN_DEBUG "[%-6.6s] "FMT"\n",	\
+		       current->comm, ##__VA_ARGS__);	\
+} while (0)
+
+#define kenter(FMT, ...) kdebug("==> %s("FMT")", __func__, ##__VA_ARGS__)
+#define kleave(FMT, ...) kdebug("<== %s()"FMT"", __func__, ##__VA_ARGS__)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3c426cb318e..e663b78a2ef 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3930,7 +3930,7 @@ u8 *tcp_parse_md5sig_option(struct tcphdr *th)
 			if (opsize < 2 || opsize > length)
 				return NULL;
 			if (opcode == TCPOPT_MD5SIG)
-				return ptr;
+				return opsize == TCPOLEN_MD5SIG ? ptr : NULL;
 		}
 		ptr += opsize - 2;
 		length -= opsize;
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 800bc53b7f6..dfe7b38dd4a 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -20,7 +20,7 @@
 /* Please put other headers in irnet.h - Thanks */
 
 /* Generic PPP callbacks (to call us) */
-static struct ppp_channel_ops irnet_ppp_ops = {
+static const struct ppp_channel_ops irnet_ppp_ops = {
 	.start_xmit = ppp_irnet_send,
 	.ioctl = ppp_irnet_ioctl
 };
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 90d82b3f288..ff954b3e94b 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -135,7 +135,10 @@ struct pppol2tp_session {
 
 static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb);
 
-static struct ppp_channel_ops pppol2tp_chan_ops = { pppol2tp_xmit , NULL };
+static const struct ppp_channel_ops pppol2tp_chan_ops = {
+	.start_xmit =  pppol2tp_xmit,
+};
+
 static const struct proto_ops pppol2tp_ops;
 
 /* Helpers to obtain tunnel/session contexts from sockets.
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 7cc4f913a43..798a91b100c 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -685,10 +685,12 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 
 	return 0;
 
+#ifdef CONFIG_INET
  fail_ifa:
 	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
 			       &local->network_latency_notifier);
 	rtnl_lock();
+#endif
  fail_pm_qos:
 	ieee80211_led_exit(local);
 	ieee80211_remove_interfaces(local);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 41f20fb7e67..872d7b6ef6b 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -400,19 +400,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	else
 		__set_bit(SCAN_SW_SCANNING, &local->scanning);
 
-	/*
-	 * Kicking off the scan need not be protected,
-	 * only the scan variable stuff, since now
-	 * local->scan_req is assigned and other callers
-	 * will abort their scan attempts.
-	 *
-	 * This avoids too many locking dependencies
-	 * so that the scan completed calls have more
-	 * locking freedom.
-	 */
-
 	ieee80211_recalc_idle(local);
-	mutex_unlock(&local->scan_mtx);
 
 	if (local->ops->hw_scan) {
 		WARN_ON(!ieee80211_prep_hw_scan(local));
@@ -420,8 +408,6 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	} else
 		rc = ieee80211_start_sw_scan(local);
 
-	mutex_lock(&local->scan_mtx);
-
 	if (rc) {
 		kfree(local->hw_scan_req);
 		local->hw_scan_req = NULL;
diff --git a/net/rxrpc/ar-ack.c b/net/rxrpc/ar-ack.c
index 2714da167fb..b6ffe4e1b84 100644
--- a/net/rxrpc/ar-ack.c
+++ b/net/rxrpc/ar-ack.c
@@ -245,6 +245,9 @@ static void rxrpc_resend_timer(struct rxrpc_call *call)
 	_enter("%d,%d,%d",
 	       call->acks_tail, call->acks_unacked, call->acks_head);
 
+	if (call->state >= RXRPC_CALL_COMPLETE)
+		return;
+
 	resend = 0;
 	resend_at = 0;
 
diff --git a/net/rxrpc/ar-call.c b/net/rxrpc/ar-call.c
index 909d092de9f..bf656c230ba 100644
--- a/net/rxrpc/ar-call.c
+++ b/net/rxrpc/ar-call.c
@@ -786,6 +786,7 @@ static void rxrpc_call_life_expired(unsigned long _call)
 
 /*
  * handle resend timer expiry
+ * - may not take call->state_lock as this can deadlock against del_timer_sync()
  */
 static void rxrpc_resend_time_expired(unsigned long _call)
 {
@@ -796,12 +797,9 @@ static void rxrpc_resend_time_expired(unsigned long _call)
 	if (call->state >= RXRPC_CALL_COMPLETE)
 		return;
 
-	read_lock_bh(&call->state_lock);
 	clear_bit(RXRPC_CALL_RUN_RTIMER, &call->flags);
-	if (call->state < RXRPC_CALL_COMPLETE &&
-	    !test_and_set_bit(RXRPC_CALL_RESEND_TIMER, &call->events))
+	if (!test_and_set_bit(RXRPC_CALL_RESEND_TIMER, &call->events))
 		rxrpc_queue_call(call);
-	read_unlock_bh(&call->state_lock);
 }
 
 /*
diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c
index d0386a413e8..509a2d53a99 100644
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -114,6 +114,7 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 	int egress;
 	int action;
 	int ihl;
+	int noff;
 
 	spin_lock(&p->tcf_lock);
 
@@ -132,7 +133,8 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 	if (unlikely(action == TC_ACT_SHOT))
 		goto drop;
 
-	if (!pskb_may_pull(skb, sizeof(*iph)))
+	noff = skb_network_offset(skb);
+	if (!pskb_may_pull(skb, sizeof(*iph) + noff))
 		goto drop;
 
 	iph = ip_hdr(skb);
@@ -144,7 +146,7 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 
 	if (!((old_addr ^ addr) & mask)) {
 		if (skb_cloned(skb) &&
-		    !skb_clone_writable(skb, sizeof(*iph)) &&
+		    !skb_clone_writable(skb, sizeof(*iph) + noff) &&
 		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
 			goto drop;
 
@@ -172,9 +174,9 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 	{
 		struct tcphdr *tcph;
 
-		if (!pskb_may_pull(skb, ihl + sizeof(*tcph)) ||
+		if (!pskb_may_pull(skb, ihl + sizeof(*tcph) + noff) ||
 		    (skb_cloned(skb) &&
-		     !skb_clone_writable(skb, ihl + sizeof(*tcph)) &&
+		     !skb_clone_writable(skb, ihl + sizeof(*tcph) + noff) &&
 		     pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
 			goto drop;
 
@@ -186,9 +188,9 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 	{
 		struct udphdr *udph;
 
-		if (!pskb_may_pull(skb, ihl + sizeof(*udph)) ||
+		if (!pskb_may_pull(skb, ihl + sizeof(*udph) + noff) ||
 		    (skb_cloned(skb) &&
-		     !skb_clone_writable(skb, ihl + sizeof(*udph)) &&
+		     !skb_clone_writable(skb, ihl + sizeof(*udph) + noff) &&
 		     pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
 			goto drop;
 
@@ -205,7 +207,7 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 	{
 		struct icmphdr *icmph;
 
-		if (!pskb_may_pull(skb, ihl + sizeof(*icmph)))
+		if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + noff))
 			goto drop;
 
 		icmph = (void *)(skb_network_header(skb) + ihl);
@@ -215,7 +217,8 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 		    (icmph->type != ICMP_PARAMETERPROB))
 			break;
 
-		if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph)))
+		if (!pskb_may_pull(skb, ihl + sizeof(*icmph) + sizeof(*iph) +
+					noff))
 			goto drop;
 
 		icmph = (void *)(skb_network_header(skb) + ihl);
@@ -229,8 +232,8 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
 			break;
 
 		if (skb_cloned(skb) &&
-		    !skb_clone_writable(skb,
-					ihl + sizeof(*icmph) + sizeof(*iph)) &&
+		    !skb_clone_writable(skb, ihl + sizeof(*icmph) +
+					     sizeof(*iph) + noff) &&
 		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
 			goto drop;
 
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index f73542d2cdd..e17096e3913 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -65,37 +65,47 @@ static inline u32 addr_fold(void *addr)
 	return (a & 0xFFFFFFFF) ^ (BITS_PER_LONG > 32 ? a >> 32 : 0);
 }
 
-static u32 flow_get_src(const struct sk_buff *skb)
+static u32 flow_get_src(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
-		return ntohl(ip_hdr(skb)->saddr);
+		if (pskb_network_may_pull(skb, sizeof(struct iphdr)))
+			return ntohl(ip_hdr(skb)->saddr);
+		break;
 	case htons(ETH_P_IPV6):
-		return ntohl(ipv6_hdr(skb)->saddr.s6_addr32[3]);
-	default:
-		return addr_fold(skb->sk);
+		if (pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))
+			return ntohl(ipv6_hdr(skb)->saddr.s6_addr32[3]);
+		break;
 	}
+
+	return addr_fold(skb->sk);
 }
 
-static u32 flow_get_dst(const struct sk_buff *skb)
+static u32 flow_get_dst(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
-		return ntohl(ip_hdr(skb)->daddr);
+		if (pskb_network_may_pull(skb, sizeof(struct iphdr)))
+			return ntohl(ip_hdr(skb)->daddr);
+		break;
 	case htons(ETH_P_IPV6):
-		return ntohl(ipv6_hdr(skb)->daddr.s6_addr32[3]);
-	default:
-		return addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
+		if (pskb_network_may_pull(skb, sizeof(struct ipv6hdr)))
+			return ntohl(ipv6_hdr(skb)->daddr.s6_addr32[3]);
+		break;
 	}
+
+	return addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 }
 
-static u32 flow_get_proto(const struct sk_buff *skb)
+static u32 flow_get_proto(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
-		return ip_hdr(skb)->protocol;
+		return pskb_network_may_pull(skb, sizeof(struct iphdr)) ?
+		       ip_hdr(skb)->protocol : 0;
 	case htons(ETH_P_IPV6):
-		return ipv6_hdr(skb)->nexthdr;
+		return pskb_network_may_pull(skb, sizeof(struct ipv6hdr)) ?
+		       ipv6_hdr(skb)->nexthdr : 0;
 	default:
 		return 0;
 	}
@@ -116,58 +126,64 @@ static int has_ports(u8 protocol)
 	}
 }
 
-static u32 flow_get_proto_src(const struct sk_buff *skb)
+static u32 flow_get_proto_src(struct sk_buff *skb)
 {
-	u32 res = 0;
-
 	switch (skb->protocol) {
 	case htons(ETH_P_IP): {
-		struct iphdr *iph = ip_hdr(skb);
+		struct iphdr *iph;
 
+		if (!pskb_network_may_pull(skb, sizeof(*iph)))
+			break;
+		iph = ip_hdr(skb);
 		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
-		    has_ports(iph->protocol))
-			res = ntohs(*(__be16 *)((void *)iph + iph->ihl * 4));
+		    has_ports(iph->protocol) &&
+		    pskb_network_may_pull(skb, iph->ihl * 4 + 2))
+			return ntohs(*(__be16 *)((void *)iph + iph->ihl * 4));
 		break;
 	}
 	case htons(ETH_P_IPV6): {
-		struct ipv6hdr *iph = ipv6_hdr(skb);
+		struct ipv6hdr *iph;
 
+		if (!pskb_network_may_pull(skb, sizeof(*iph) + 2))
+			break;
+		iph = ipv6_hdr(skb);
 		if (has_ports(iph->nexthdr))
-			res = ntohs(*(__be16 *)&iph[1]);
+			return ntohs(*(__be16 *)&iph[1]);
 		break;
 	}
-	default:
-		res = addr_fold(skb->sk);
 	}
 
-	return res;
+	return addr_fold(skb->sk);
 }
 
-static u32 flow_get_proto_dst(const struct sk_buff *skb)
+static u32 flow_get_proto_dst(struct sk_buff *skb)
 {
-	u32 res = 0;
-
 	switch (skb->protocol) {
 	case htons(ETH_P_IP): {
-		struct iphdr *iph = ip_hdr(skb);
+		struct iphdr *iph;
 
+		if (!pskb_network_may_pull(skb, sizeof(*iph)))
+			break;
+		iph = ip_hdr(skb);
 		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
-		    has_ports(iph->protocol))
-			res = ntohs(*(__be16 *)((void *)iph + iph->ihl * 4 + 2));
+		    has_ports(iph->protocol) &&
+		    pskb_network_may_pull(skb, iph->ihl * 4 + 4))
+			return ntohs(*(__be16 *)((void *)iph + iph->ihl * 4 + 2));
 		break;
 	}
 	case htons(ETH_P_IPV6): {
-		struct ipv6hdr *iph = ipv6_hdr(skb);
+		struct ipv6hdr *iph;
 
+		if (!pskb_network_may_pull(skb, sizeof(*iph) + 4))
+			break;
+		iph = ipv6_hdr(skb);
 		if (has_ports(iph->nexthdr))
-			res = ntohs(*(__be16 *)((void *)&iph[1] + 2));
+			return ntohs(*(__be16 *)((void *)&iph[1] + 2));
 		break;
 	}
-	default:
-		res = addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 	}
 
-	return res;
+	return addr_fold(skb_dst(skb)) ^ (__force u16)skb->protocol;
 }
 
 static u32 flow_get_iif(const struct sk_buff *skb)
@@ -211,7 +227,7 @@ static u32 flow_get_nfct(const struct sk_buff *skb)
 })
 #endif
 
-static u32 flow_get_nfct_src(const struct sk_buff *skb)
+static u32 flow_get_nfct_src(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
@@ -223,7 +239,7 @@ fallback:
 	return flow_get_src(skb);
 }
 
-static u32 flow_get_nfct_dst(const struct sk_buff *skb)
+static u32 flow_get_nfct_dst(struct sk_buff *skb)
 {
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
@@ -235,14 +251,14 @@ fallback:
 	return flow_get_dst(skb);
 }
 
-static u32 flow_get_nfct_proto_src(const struct sk_buff *skb)
+static u32 flow_get_nfct_proto_src(struct sk_buff *skb)
 {
 	return ntohs(CTTUPLE(skb, src.u.all));
 fallback:
 	return flow_get_proto_src(skb);
 }
 
-static u32 flow_get_nfct_proto_dst(const struct sk_buff *skb)
+static u32 flow_get_nfct_proto_dst(struct sk_buff *skb)
 {
 	return ntohs(CTTUPLE(skb, dst.u.all));
 fallback:
@@ -281,7 +297,7 @@ static u32 flow_get_vlan_tag(const struct sk_buff *skb)
 	return tag & VLAN_VID_MASK;
 }
 
-static u32 flow_key_get(const struct sk_buff *skb, int key)
+static u32 flow_key_get(struct sk_buff *skb, int key)
 {
 	switch (key) {
 	case FLOW_KEY_SRC:
diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h
index dd9414e4420..425a1790b04 100644
--- a/net/sched/cls_rsvp.h
+++ b/net/sched/cls_rsvp.h
@@ -143,9 +143,17 @@ static int rsvp_classify(struct sk_buff *skb, struct tcf_proto *tp,
 	u8 tunnelid = 0;
 	u8 *xprt;
 #if RSVP_DST_LEN == 4
-	struct ipv6hdr *nhptr = ipv6_hdr(skb);
+	struct ipv6hdr *nhptr;
+
+	if (!pskb_network_may_pull(skb, sizeof(*nhptr)))
+		return -1;
+	nhptr = ipv6_hdr(skb);
 #else
-	struct iphdr *nhptr = ip_hdr(skb);
+	struct iphdr *nhptr;
+
+	if (!pskb_network_may_pull(skb, sizeof(*nhptr)))
+		return -1;
+	nhptr = ip_hdr(skb);
 #endif
 
 restart:
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index c65762823f5..534f33231c1 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -122,7 +122,11 @@ static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
 	switch (skb->protocol) {
 	case htons(ETH_P_IP):
 	{
-		const struct iphdr *iph = ip_hdr(skb);
+		const struct iphdr *iph;
+
+		if (!pskb_network_may_pull(skb, sizeof(*iph)))
+			goto err;
+		iph = ip_hdr(skb);
 		h = (__force u32)iph->daddr;
 		h2 = (__force u32)iph->saddr ^ iph->protocol;
 		if (!(iph->frag_off&htons(IP_MF|IP_OFFSET)) &&
@@ -131,25 +135,32 @@ static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb)
 		     iph->protocol == IPPROTO_UDPLITE ||
 		     iph->protocol == IPPROTO_SCTP ||
 		     iph->protocol == IPPROTO_DCCP ||
-		     iph->protocol == IPPROTO_ESP))
+		     iph->protocol == IPPROTO_ESP) &&
+		     pskb_network_may_pull(skb, iph->ihl * 4 + 4))
 			h2 ^= *(((u32*)iph) + iph->ihl);
 		break;
 	}
 	case htons(ETH_P_IPV6):
 	{
-		struct ipv6hdr *iph = ipv6_hdr(skb);
+		struct ipv6hdr *iph;
+
+		if (!pskb_network_may_pull(skb, sizeof(*iph)))
+			goto err;
+		iph = ipv6_hdr(skb);
 		h = (__force u32)iph->daddr.s6_addr32[3];
 		h2 = (__force u32)iph->saddr.s6_addr32[3] ^ iph->nexthdr;
-		if (iph->nexthdr == IPPROTO_TCP ||
-		    iph->nexthdr == IPPROTO_UDP ||
-		    iph->nexthdr == IPPROTO_UDPLITE ||
-		    iph->nexthdr == IPPROTO_SCTP ||
-		    iph->nexthdr == IPPROTO_DCCP ||
-		    iph->nexthdr == IPPROTO_ESP)
+		if ((iph->nexthdr == IPPROTO_TCP ||
+		     iph->nexthdr == IPPROTO_UDP ||
+		     iph->nexthdr == IPPROTO_UDPLITE ||
+		     iph->nexthdr == IPPROTO_SCTP ||
+		     iph->nexthdr == IPPROTO_DCCP ||
+		     iph->nexthdr == IPPROTO_ESP) &&
+		    pskb_network_may_pull(skb, sizeof(*iph) + 4))
 			h2 ^= *(u32*)&iph[1];
 		break;
 	}
 	default:
+err:
 		h = (unsigned long)skb_dst(skb) ^ (__force u32)skb->protocol;
 		h2 = (unsigned long)skb->sk;
 	}
@@ -502,6 +513,12 @@ static unsigned long sfq_get(struct Qdisc *sch, u32 classid)
 	return 0;
 }
 
+static unsigned long sfq_bind(struct Qdisc *sch, unsigned long parent,
+			      u32 classid)
+{
+	return 0;
+}
+
 static struct tcf_proto **sfq_find_tcf(struct Qdisc *sch, unsigned long cl)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
@@ -556,6 +573,7 @@ static void sfq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
 static const struct Qdisc_class_ops sfq_class_ops = {
 	.get		=	sfq_get,
 	.tcf_chain	=	sfq_find_tcf,
+	.bind_tcf	=	sfq_bind,
 	.dump		=	sfq_dump_class,
 	.dump_stats	=	sfq_dump_class_stats,
 	.walk		=	sfq_walk,
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 8dc47f1d000..880d0de3f50 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -19,6 +19,15 @@
 # define RPCDBG_FACILITY	RPCDBG_AUTH
 #endif
 
+#define RPC_CREDCACHE_DEFAULT_HASHBITS	(4)
+struct rpc_cred_cache {
+	struct hlist_head	*hashtable;
+	unsigned int		hashbits;
+	spinlock_t		lock;
+};
+
+static unsigned int auth_hashbits = RPC_CREDCACHE_DEFAULT_HASHBITS;
+
 static DEFINE_SPINLOCK(rpc_authflavor_lock);
 static const struct rpc_authops *auth_flavors[RPC_AUTH_MAXFLAVOR] = {
 	&authnull_ops,		/* AUTH_NULL */
@@ -29,6 +38,42 @@ static const struct rpc_authops *auth_flavors[RPC_AUTH_MAXFLAVOR] = {
 static LIST_HEAD(cred_unused);
 static unsigned long number_cred_unused;
 
+#define MAX_HASHTABLE_BITS (10) 
+static int param_set_hashtbl_sz(const char *val, struct kernel_param *kp)
+{
+	unsigned long num;
+	unsigned int nbits;
+	int ret;
+
+	if (!val)
+		goto out_inval;
+	ret = strict_strtoul(val, 0, &num);
+	if (ret == -EINVAL)
+		goto out_inval;
+	nbits = fls(num);
+	if (num > (1U << nbits))
+		nbits++;
+	if (nbits > MAX_HASHTABLE_BITS || nbits < 2)
+		goto out_inval;
+	*(unsigned int *)kp->arg = nbits;
+	return 0;
+out_inval:
+	return -EINVAL;
+}
+
+static int param_get_hashtbl_sz(char *buffer, struct kernel_param *kp)
+{
+	unsigned int nbits;
+
+	nbits = *(unsigned int *)kp->arg;
+	return sprintf(buffer, "%u", 1U << nbits);
+}
+
+#define param_check_hashtbl_sz(name, p) __param_check(name, p, unsigned int);
+
+module_param_named(auth_hashtable_size, auth_hashbits, hashtbl_sz, 0644);
+MODULE_PARM_DESC(auth_hashtable_size, "RPC credential cache hashtable size");
+
 static u32
 pseudoflavor_to_flavor(u32 flavor) {
 	if (flavor >= RPC_AUTH_MAXFLAVOR)
@@ -145,16 +190,23 @@ int
 rpcauth_init_credcache(struct rpc_auth *auth)
 {
 	struct rpc_cred_cache *new;
-	int i;
+	unsigned int hashsize;
 
 	new = kmalloc(sizeof(*new), GFP_KERNEL);
 	if (!new)
-		return -ENOMEM;
-	for (i = 0; i < RPC_CREDCACHE_NR; i++)
-		INIT_HLIST_HEAD(&new->hashtable[i]);
+		goto out_nocache;
+	new->hashbits = auth_hashbits;
+	hashsize = 1U << new->hashbits;
+	new->hashtable = kcalloc(hashsize, sizeof(new->hashtable[0]), GFP_KERNEL);
+	if (!new->hashtable)
+		goto out_nohashtbl;
 	spin_lock_init(&new->lock);
 	auth->au_credcache = new;
 	return 0;
+out_nohashtbl:
+	kfree(new);
+out_nocache:
+	return -ENOMEM;
 }
 EXPORT_SYMBOL_GPL(rpcauth_init_credcache);
 
@@ -183,11 +235,12 @@ rpcauth_clear_credcache(struct rpc_cred_cache *cache)
 	LIST_HEAD(free);
 	struct hlist_head *head;
 	struct rpc_cred	*cred;
+	unsigned int hashsize = 1U << cache->hashbits;
 	int		i;
 
 	spin_lock(&rpc_credcache_lock);
 	spin_lock(&cache->lock);
-	for (i = 0; i < RPC_CREDCACHE_NR; i++) {
+	for (i = 0; i < hashsize; i++) {
 		head = &cache->hashtable[i];
 		while (!hlist_empty(head)) {
 			cred = hlist_entry(head->first, struct rpc_cred, cr_hash);
@@ -216,6 +269,7 @@ rpcauth_destroy_credcache(struct rpc_auth *auth)
 	if (cache) {
 		auth->au_credcache = NULL;
 		rpcauth_clear_credcache(cache);
+		kfree(cache->hashtable);
 		kfree(cache);
 	}
 }
@@ -297,7 +351,7 @@ rpcauth_lookup_credcache(struct rpc_auth *auth, struct auth_cred * acred,
 			*entry, *new;
 	unsigned int nr;
 
-	nr = hash_long(acred->uid, RPC_CREDCACHE_HASHBITS);
+	nr = hash_long(acred->uid, cache->hashbits);
 
 	rcu_read_lock();
 	hlist_for_each_entry_rcu(entry, pos, &cache->hashtable[nr], cr_hash) {
@@ -390,16 +444,16 @@ rpcauth_init_cred(struct rpc_cred *cred, const struct auth_cred *acred,
 }
 EXPORT_SYMBOL_GPL(rpcauth_init_cred);
 
-void
+struct rpc_cred *
 rpcauth_generic_bind_cred(struct rpc_task *task, struct rpc_cred *cred, int lookupflags)
 {
-	task->tk_msg.rpc_cred = get_rpccred(cred);
 	dprintk("RPC: %5u holding %s cred %p\n", task->tk_pid,
 			cred->cr_auth->au_ops->au_name, cred);
+	return get_rpccred(cred);
 }
 EXPORT_SYMBOL_GPL(rpcauth_generic_bind_cred);
 
-static void
+static struct rpc_cred *
 rpcauth_bind_root_cred(struct rpc_task *task, int lookupflags)
 {
 	struct rpc_auth *auth = task->tk_client->cl_auth;
@@ -407,45 +461,43 @@ rpcauth_bind_root_cred(struct rpc_task *task, int lookupflags)
 		.uid = 0,
 		.gid = 0,
 	};
-	struct rpc_cred *ret;
 
 	dprintk("RPC: %5u looking up %s cred\n",
 		task->tk_pid, task->tk_client->cl_auth->au_ops->au_name);
-	ret = auth->au_ops->lookup_cred(auth, &acred, lookupflags);
-	if (!IS_ERR(ret))
-		task->tk_msg.rpc_cred = ret;
-	else
-		task->tk_status = PTR_ERR(ret);
+	return auth->au_ops->lookup_cred(auth, &acred, lookupflags);
 }
 
-static void
+static struct rpc_cred *
 rpcauth_bind_new_cred(struct rpc_task *task, int lookupflags)
 {
 	struct rpc_auth *auth = task->tk_client->cl_auth;
-	struct rpc_cred *ret;
 
 	dprintk("RPC: %5u looking up %s cred\n",
 		task->tk_pid, auth->au_ops->au_name);
-	ret = rpcauth_lookupcred(auth, lookupflags);
-	if (!IS_ERR(ret))
-		task->tk_msg.rpc_cred = ret;
-	else
-		task->tk_status = PTR_ERR(ret);
+	return rpcauth_lookupcred(auth, lookupflags);
 }
 
-void
+static int
 rpcauth_bindcred(struct rpc_task *task, struct rpc_cred *cred, int flags)
 {
+	struct rpc_rqst *req = task->tk_rqstp;
+	struct rpc_cred *new;
 	int lookupflags = 0;
 
 	if (flags & RPC_TASK_ASYNC)
 		lookupflags |= RPCAUTH_LOOKUP_NEW;
 	if (cred != NULL)
-		cred->cr_ops->crbind(task, cred, lookupflags);
+		new = cred->cr_ops->crbind(task, cred, lookupflags);
 	else if (flags & RPC_TASK_ROOTCREDS)
-		rpcauth_bind_root_cred(task, lookupflags);
+		new = rpcauth_bind_root_cred(task, lookupflags);
 	else
-		rpcauth_bind_new_cred(task, lookupflags);
+		new = rpcauth_bind_new_cred(task, lookupflags);
+	if (IS_ERR(new))
+		return PTR_ERR(new);
+	if (req->rq_cred != NULL)
+		put_rpccred(req->rq_cred);
+	req->rq_cred = new;
+	return 0;
 }
 
 void
@@ -484,22 +536,10 @@ out_nodestroy:
 }
 EXPORT_SYMBOL_GPL(put_rpccred);
 
-void
-rpcauth_unbindcred(struct rpc_task *task)
-{
-	struct rpc_cred	*cred = task->tk_msg.rpc_cred;
-
-	dprintk("RPC: %5u releasing %s cred %p\n",
-		task->tk_pid, cred->cr_auth->au_ops->au_name, cred);
-
-	put_rpccred(cred);
-	task->tk_msg.rpc_cred = NULL;
-}
-
 __be32 *
 rpcauth_marshcred(struct rpc_task *task, __be32 *p)
 {
-	struct rpc_cred	*cred = task->tk_msg.rpc_cred;
+	struct rpc_cred	*cred = task->tk_rqstp->rq_cred;
 
 	dprintk("RPC: %5u marshaling %s cred %p\n",
 		task->tk_pid, cred->cr_auth->au_ops->au_name, cred);
@@ -510,7 +550,7 @@ rpcauth_marshcred(struct rpc_task *task, __be32 *p)
 __be32 *
 rpcauth_checkverf(struct rpc_task *task, __be32 *p)
 {
-	struct rpc_cred	*cred = task->tk_msg.rpc_cred;
+	struct rpc_cred	*cred = task->tk_rqstp->rq_cred;
 
 	dprintk("RPC: %5u validating %s cred %p\n",
 		task->tk_pid, cred->cr_auth->au_ops->au_name, cred);
@@ -522,7 +562,7 @@ int
 rpcauth_wrap_req(struct rpc_task *task, kxdrproc_t encode, void *rqstp,
 		__be32 *data, void *obj)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 
 	dprintk("RPC: %5u using %s cred %p to wrap rpc data\n",
 			task->tk_pid, cred->cr_ops->cr_name, cred);
@@ -536,7 +576,7 @@ int
 rpcauth_unwrap_resp(struct rpc_task *task, kxdrproc_t decode, void *rqstp,
 		__be32 *data, void *obj)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 
 	dprintk("RPC: %5u using %s cred %p to unwrap rpc data\n",
 			task->tk_pid, cred->cr_ops->cr_name, cred);
@@ -550,13 +590,21 @@ rpcauth_unwrap_resp(struct rpc_task *task, kxdrproc_t decode, void *rqstp,
 int
 rpcauth_refreshcred(struct rpc_task *task)
 {
-	struct rpc_cred	*cred = task->tk_msg.rpc_cred;
+	struct rpc_cred	*cred = task->tk_rqstp->rq_cred;
 	int err;
 
+	cred = task->tk_rqstp->rq_cred;
+	if (cred == NULL) {
+		err = rpcauth_bindcred(task, task->tk_msg.rpc_cred, task->tk_flags);
+		if (err < 0)
+			goto out;
+		cred = task->tk_rqstp->rq_cred;
+	};
 	dprintk("RPC: %5u refreshing %s cred %p\n",
 		task->tk_pid, cred->cr_auth->au_ops->au_name, cred);
 
 	err = cred->cr_ops->crrefresh(task);
+out:
 	if (err < 0)
 		task->tk_status = err;
 	return err;
@@ -565,7 +613,7 @@ rpcauth_refreshcred(struct rpc_task *task)
 void
 rpcauth_invalcred(struct rpc_task *task)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 
 	dprintk("RPC: %5u invalidating %s cred %p\n",
 		task->tk_pid, cred->cr_auth->au_ops->au_name, cred);
@@ -576,7 +624,7 @@ rpcauth_invalcred(struct rpc_task *task)
 int
 rpcauth_uptodatecred(struct rpc_task *task)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 
 	return cred == NULL ||
 		test_bit(RPCAUTH_CRED_UPTODATE, &cred->cr_flags) != 0;
@@ -587,14 +635,27 @@ static struct shrinker rpc_cred_shrinker = {
 	.seeks = DEFAULT_SEEKS,
 };
 
-void __init rpcauth_init_module(void)
+int __init rpcauth_init_module(void)
 {
-	rpc_init_authunix();
-	rpc_init_generic_auth();
+	int err;
+
+	err = rpc_init_authunix();
+	if (err < 0)
+		goto out1;
+	err = rpc_init_generic_auth();
+	if (err < 0)
+		goto out2;
 	register_shrinker(&rpc_cred_shrinker);
+	return 0;
+out2:
+	rpc_destroy_authunix();
+out1:
+	return err;
 }
 
 void __exit rpcauth_remove_module(void)
 {
+	rpc_destroy_authunix();
+	rpc_destroy_generic_auth();
 	unregister_shrinker(&rpc_cred_shrinker);
 }
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index 8f623b0f03d..43162bb3b78 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -27,7 +27,6 @@ struct generic_cred {
 };
 
 static struct rpc_auth generic_auth;
-static struct rpc_cred_cache generic_cred_cache;
 static const struct rpc_credops generic_credops;
 
 /*
@@ -55,18 +54,13 @@ struct rpc_cred *rpc_lookup_machine_cred(void)
 }
 EXPORT_SYMBOL_GPL(rpc_lookup_machine_cred);
 
-static void
-generic_bind_cred(struct rpc_task *task, struct rpc_cred *cred, int lookupflags)
+static struct rpc_cred *generic_bind_cred(struct rpc_task *task,
+		struct rpc_cred *cred, int lookupflags)
 {
 	struct rpc_auth *auth = task->tk_client->cl_auth;
 	struct auth_cred *acred = &container_of(cred, struct generic_cred, gc_base)->acred;
-	struct rpc_cred *ret;
 
-	ret = auth->au_ops->lookup_cred(auth, acred, lookupflags);
-	if (!IS_ERR(ret))
-		task->tk_msg.rpc_cred = ret;
-	else
-		task->tk_status = PTR_ERR(ret);
+	return auth->au_ops->lookup_cred(auth, acred, lookupflags);
 }
 
 /*
@@ -159,20 +153,16 @@ out_nomatch:
 	return 0;
 }
 
-void __init rpc_init_generic_auth(void)
+int __init rpc_init_generic_auth(void)
 {
-	spin_lock_init(&generic_cred_cache.lock);
+	return rpcauth_init_credcache(&generic_auth);
 }
 
 void __exit rpc_destroy_generic_auth(void)
 {
-	rpcauth_clear_credcache(&generic_cred_cache);
+	rpcauth_destroy_credcache(&generic_auth);
 }
 
-static struct rpc_cred_cache generic_cred_cache = {
-	{{ NULL, },},
-};
-
 static const struct rpc_authops generic_auth_ops = {
 	.owner = THIS_MODULE,
 	.au_name = "Generic",
@@ -183,7 +173,6 @@ static const struct rpc_authops generic_auth_ops = {
 static struct rpc_auth generic_auth = {
 	.au_ops = &generic_auth_ops,
 	.au_count = ATOMIC_INIT(0),
-	.au_credcache = &generic_cred_cache,
 };
 
 static const struct rpc_credops generic_credops = {
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 8da2a0e6857..dcfc66bab2b 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -373,7 +373,7 @@ gss_handle_downcall_result(struct gss_cred *gss_cred, struct gss_upcall_msg *gss
 static void
 gss_upcall_callback(struct rpc_task *task)
 {
-	struct gss_cred *gss_cred = container_of(task->tk_msg.rpc_cred,
+	struct gss_cred *gss_cred = container_of(task->tk_rqstp->rq_cred,
 			struct gss_cred, gc_base);
 	struct gss_upcall_msg *gss_msg = gss_cred->gc_upcall;
 	struct inode *inode = &gss_msg->inode->vfs_inode;
@@ -502,7 +502,7 @@ static void warn_gssd(void)
 static inline int
 gss_refresh_upcall(struct rpc_task *task)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 	struct gss_auth *gss_auth = container_of(cred->cr_auth,
 			struct gss_auth, rpc_auth);
 	struct gss_cred *gss_cred = container_of(cred,
@@ -928,6 +928,7 @@ gss_do_free_ctx(struct gss_cl_ctx *ctx)
 {
 	dprintk("RPC:       gss_free_ctx\n");
 
+	gss_delete_sec_context(&ctx->gc_gss_ctx);
 	kfree(ctx->gc_wire_ctx.data);
 	kfree(ctx);
 }
@@ -942,13 +943,7 @@ gss_free_ctx_callback(struct rcu_head *head)
 static void
 gss_free_ctx(struct gss_cl_ctx *ctx)
 {
-	struct gss_ctx *gc_gss_ctx;
-
-	gc_gss_ctx = rcu_dereference(ctx->gc_gss_ctx);
-	rcu_assign_pointer(ctx->gc_gss_ctx, NULL);
 	call_rcu(&ctx->gc_rcu, gss_free_ctx_callback);
-	if (gc_gss_ctx)
-		gss_delete_sec_context(&gc_gss_ctx);
 }
 
 static void
@@ -1064,12 +1059,12 @@ out:
 static __be32 *
 gss_marshal(struct rpc_task *task, __be32 *p)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_rqst *req = task->tk_rqstp;
+	struct rpc_cred *cred = req->rq_cred;
 	struct gss_cred	*gss_cred = container_of(cred, struct gss_cred,
 						 gc_base);
 	struct gss_cl_ctx	*ctx = gss_cred_get_ctx(cred);
 	__be32		*cred_len;
-	struct rpc_rqst *req = task->tk_rqstp;
 	u32             maj_stat = 0;
 	struct xdr_netobj mic;
 	struct kvec	iov;
@@ -1119,7 +1114,7 @@ out_put_ctx:
 
 static int gss_renew_cred(struct rpc_task *task)
 {
-	struct rpc_cred *oldcred = task->tk_msg.rpc_cred;
+	struct rpc_cred *oldcred = task->tk_rqstp->rq_cred;
 	struct gss_cred *gss_cred = container_of(oldcred,
 						 struct gss_cred,
 						 gc_base);
@@ -1133,7 +1128,7 @@ static int gss_renew_cred(struct rpc_task *task)
 	new = gss_lookup_cred(auth, &acred, RPCAUTH_LOOKUP_NEW);
 	if (IS_ERR(new))
 		return PTR_ERR(new);
-	task->tk_msg.rpc_cred = new;
+	task->tk_rqstp->rq_cred = new;
 	put_rpccred(oldcred);
 	return 0;
 }
@@ -1161,7 +1156,7 @@ static int gss_cred_is_negative_entry(struct rpc_cred *cred)
 static int
 gss_refresh(struct rpc_task *task)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 	int ret = 0;
 
 	if (gss_cred_is_negative_entry(cred))
@@ -1172,7 +1167,7 @@ gss_refresh(struct rpc_task *task)
 		ret = gss_renew_cred(task);
 		if (ret < 0)
 			goto out;
-		cred = task->tk_msg.rpc_cred;
+		cred = task->tk_rqstp->rq_cred;
 	}
 
 	if (test_bit(RPCAUTH_CRED_NEW, &cred->cr_flags))
@@ -1191,7 +1186,7 @@ gss_refresh_null(struct rpc_task *task)
 static __be32 *
 gss_validate(struct rpc_task *task, __be32 *p)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 	struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred);
 	__be32		seq;
 	struct kvec	iov;
@@ -1400,7 +1395,7 @@ static int
 gss_wrap_req(struct rpc_task *task,
 	     kxdrproc_t encode, void *rqstp, __be32 *p, void *obj)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 	struct gss_cred	*gss_cred = container_of(cred, struct gss_cred,
 			gc_base);
 	struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred);
@@ -1503,7 +1498,7 @@ static int
 gss_unwrap_resp(struct rpc_task *task,
 		kxdrproc_t decode, void *rqstp, __be32 *p, void *obj)
 {
-	struct rpc_cred *cred = task->tk_msg.rpc_cred;
+	struct rpc_cred *cred = task->tk_rqstp->rq_cred;
 	struct gss_cred *gss_cred = container_of(cred, struct gss_cred,
 			gc_base);
 	struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred);
diff --git a/net/sunrpc/auth_null.c b/net/sunrpc/auth_null.c
index 1db618f56ec..a5c36c01707 100644
--- a/net/sunrpc/auth_null.c
+++ b/net/sunrpc/auth_null.c
@@ -75,7 +75,7 @@ nul_marshal(struct rpc_task *task, __be32 *p)
 static int
 nul_refresh(struct rpc_task *task)
 {
-	set_bit(RPCAUTH_CRED_UPTODATE, &task->tk_msg.rpc_cred->cr_flags);
+	set_bit(RPCAUTH_CRED_UPTODATE, &task->tk_rqstp->rq_cred->cr_flags);
 	return 0;
 }
 
diff --git a/net/sunrpc/auth_unix.c b/net/sunrpc/auth_unix.c
index aac2f8b4ee2..4cb70dc6e7a 100644
--- a/net/sunrpc/auth_unix.c
+++ b/net/sunrpc/auth_unix.c
@@ -29,7 +29,6 @@ struct unx_cred {
 #endif
 
 static struct rpc_auth		unix_auth;
-static struct rpc_cred_cache	unix_cred_cache;
 static const struct rpc_credops	unix_credops;
 
 static struct rpc_auth *
@@ -141,7 +140,7 @@ static __be32 *
 unx_marshal(struct rpc_task *task, __be32 *p)
 {
 	struct rpc_clnt	*clnt = task->tk_client;
-	struct unx_cred	*cred = container_of(task->tk_msg.rpc_cred, struct unx_cred, uc_base);
+	struct unx_cred	*cred = container_of(task->tk_rqstp->rq_cred, struct unx_cred, uc_base);
 	__be32		*base, *hold;
 	int		i;
 
@@ -174,7 +173,7 @@ unx_marshal(struct rpc_task *task, __be32 *p)
 static int
 unx_refresh(struct rpc_task *task)
 {
-	set_bit(RPCAUTH_CRED_UPTODATE, &task->tk_msg.rpc_cred->cr_flags);
+	set_bit(RPCAUTH_CRED_UPTODATE, &task->tk_rqstp->rq_cred->cr_flags);
 	return 0;
 }
 
@@ -197,15 +196,20 @@ unx_validate(struct rpc_task *task, __be32 *p)
 		printk("RPC: giant verf size: %u\n", size);
 		return NULL;
 	}
-	task->tk_msg.rpc_cred->cr_auth->au_rslack = (size >> 2) + 2;
+	task->tk_rqstp->rq_cred->cr_auth->au_rslack = (size >> 2) + 2;
 	p += (size >> 2);
 
 	return p;
 }
 
-void __init rpc_init_authunix(void)
+int __init rpc_init_authunix(void)
 {
-	spin_lock_init(&unix_cred_cache.lock);
+	return rpcauth_init_credcache(&unix_auth);
+}
+
+void rpc_destroy_authunix(void)
+{
+	rpcauth_destroy_credcache(&unix_auth);
 }
 
 const struct rpc_authops authunix_ops = {
@@ -219,17 +223,12 @@ const struct rpc_authops authunix_ops = {
 };
 
 static
-struct rpc_cred_cache	unix_cred_cache = {
-};
-
-static
 struct rpc_auth		unix_auth = {
 	.au_cslack	= UNX_WRITESLACK,
 	.au_rslack	= 2,			/* assume AUTH_NULL verf */
 	.au_ops		= &authunix_ops,
 	.au_flavor	= RPC_AUTH_UNIX,
 	.au_count	= ATOMIC_INIT(0),
-	.au_credcache	= &unix_cred_cache,
 };
 
 static
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 58de76c8540..2b06410e584 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -34,7 +34,6 @@
 #include <linux/sunrpc/cache.h>
 #include <linux/sunrpc/stats.h>
 #include <linux/sunrpc/rpc_pipe_fs.h>
-#include <linux/smp_lock.h>
 
 #define	 RPCDBG_FACILITY RPCDBG_CACHE
 
@@ -320,7 +319,7 @@ static struct cache_detail *current_detail;
 static int current_index;
 
 static void do_cache_clean(struct work_struct *work);
-static DECLARE_DELAYED_WORK(cache_cleaner, do_cache_clean);
+static struct delayed_work cache_cleaner;
 
 static void sunrpc_init_cache_detail(struct cache_detail *cd)
 {
@@ -1504,6 +1503,11 @@ static int create_cache_proc_entries(struct cache_detail *cd)
 }
 #endif
 
+void __init cache_initialize(void)
+{
+	INIT_DELAYED_WORK_DEFERRABLE(&cache_cleaner, do_cache_clean);
+}
+
 int cache_register(struct cache_detail *cd)
 {
 	int ret;
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 756fc324db9..2388d83b68f 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -414,6 +414,35 @@ out_no_clnt:
 EXPORT_SYMBOL_GPL(rpc_clone_client);
 
 /*
+ * Kill all tasks for the given client.
+ * XXX: kill their descendants as well?
+ */
+void rpc_killall_tasks(struct rpc_clnt *clnt)
+{
+	struct rpc_task	*rovr;
+
+
+	if (list_empty(&clnt->cl_tasks))
+		return;
+	dprintk("RPC:       killing all tasks for client %p\n", clnt);
+	/*
+	 * Spin lock all_tasks to prevent changes...
+	 */
+	spin_lock(&clnt->cl_lock);
+	list_for_each_entry(rovr, &clnt->cl_tasks, tk_task) {
+		if (!RPC_IS_ACTIVATED(rovr))
+			continue;
+		if (!(rovr->tk_flags & RPC_TASK_KILLED)) {
+			rovr->tk_flags |= RPC_TASK_KILLED;
+			rpc_exit(rovr, -EIO);
+			rpc_wake_up_queued_task(rovr->tk_waitqueue, rovr);
+		}
+	}
+	spin_unlock(&clnt->cl_lock);
+}
+EXPORT_SYMBOL_GPL(rpc_killall_tasks);
+
+/*
  * Properly shut down an RPC client, terminating all outstanding
  * requests.
  */
@@ -538,6 +567,49 @@ out:
 }
 EXPORT_SYMBOL_GPL(rpc_bind_new_program);
 
+void rpc_task_release_client(struct rpc_task *task)
+{
+	struct rpc_clnt *clnt = task->tk_client;
+
+	if (clnt != NULL) {
+		/* Remove from client task list */
+		spin_lock(&clnt->cl_lock);
+		list_del(&task->tk_task);
+		spin_unlock(&clnt->cl_lock);
+		task->tk_client = NULL;
+
+		rpc_release_client(clnt);
+	}
+}
+
+static
+void rpc_task_set_client(struct rpc_task *task, struct rpc_clnt *clnt)
+{
+	if (clnt != NULL) {
+		rpc_task_release_client(task);
+		task->tk_client = clnt;
+		kref_get(&clnt->cl_kref);
+		if (clnt->cl_softrtry)
+			task->tk_flags |= RPC_TASK_SOFT;
+		/* Add to the client's list of all tasks */
+		spin_lock(&clnt->cl_lock);
+		list_add_tail(&task->tk_task, &clnt->cl_tasks);
+		spin_unlock(&clnt->cl_lock);
+	}
+}
+
+static void
+rpc_task_set_rpc_message(struct rpc_task *task, const struct rpc_message *msg)
+{
+	if (msg != NULL) {
+		task->tk_msg.rpc_proc = msg->rpc_proc;
+		task->tk_msg.rpc_argp = msg->rpc_argp;
+		task->tk_msg.rpc_resp = msg->rpc_resp;
+		if (msg->rpc_cred != NULL)
+			task->tk_msg.rpc_cred = get_rpccred(msg->rpc_cred);
+	}
+}
+
 /*
  * Default callback for async RPC calls
  */
@@ -562,6 +634,18 @@ struct rpc_task *rpc_run_task(const struct rpc_task_setup *task_setup_data)
 	if (IS_ERR(task))
 		goto out;
 
+	rpc_task_set_client(task, task_setup_data->rpc_client);
+	rpc_task_set_rpc_message(task, task_setup_data->rpc_message);
+
+	if (task->tk_status != 0) {
+		int ret = task->tk_status;
+		rpc_put_task(task);
+		return ERR_PTR(ret);
+	}
+
+	if (task->tk_action == NULL)
+		rpc_call_start(task);
+
 	atomic_inc(&task->tk_count);
 	rpc_execute(task);
 out:
@@ -756,12 +840,13 @@ EXPORT_SYMBOL_GPL(rpc_force_rebind);
  * Restart an (async) RPC call from the call_prepare state.
  * Usually called from within the exit handler.
  */
-void
+int
 rpc_restart_call_prepare(struct rpc_task *task)
 {
 	if (RPC_ASSASSINATED(task))
-		return;
+		return 0;
 	task->tk_action = rpc_prepare_task;
+	return 1;
 }
 EXPORT_SYMBOL_GPL(rpc_restart_call_prepare);
 
@@ -769,13 +854,13 @@ EXPORT_SYMBOL_GPL(rpc_restart_call_prepare);
  * Restart an (async) RPC call. Usually called from within the
  * exit handler.
  */
-void
+int
 rpc_restart_call(struct rpc_task *task)
 {
 	if (RPC_ASSASSINATED(task))
-		return;
-
+		return 0;
 	task->tk_action = call_start;
+	return 1;
 }
 EXPORT_SYMBOL_GPL(rpc_restart_call);
 
@@ -824,11 +909,6 @@ call_reserve(struct rpc_task *task)
 {
 	dprint_status(task);
 
-	if (!rpcauth_uptodatecred(task)) {
-		task->tk_action = call_refresh;
-		return;
-	}
-
 	task->tk_status  = 0;
 	task->tk_action  = call_reserveresult;
 	xprt_reserve(task);
@@ -892,7 +972,7 @@ call_reserveresult(struct rpc_task *task)
 static void
 call_allocate(struct rpc_task *task)
 {
-	unsigned int slack = task->tk_msg.rpc_cred->cr_auth->au_cslack;
+	unsigned int slack = task->tk_client->cl_auth->au_cslack;
 	struct rpc_rqst *req = task->tk_rqstp;
 	struct rpc_xprt *xprt = task->tk_xprt;
 	struct rpc_procinfo *proc = task->tk_msg.rpc_proc;
@@ -900,7 +980,7 @@ call_allocate(struct rpc_task *task)
 	dprint_status(task);
 
 	task->tk_status = 0;
-	task->tk_action = call_bind;
+	task->tk_action = call_refresh;
 
 	if (req->rq_buffer)
 		return;
@@ -937,6 +1017,47 @@ call_allocate(struct rpc_task *task)
 	rpc_exit(task, -ERESTARTSYS);
 }
 
+/*
+ * 2a.	Bind and/or refresh the credentials
+ */
+static void
+call_refresh(struct rpc_task *task)
+{
+	dprint_status(task);
+
+	task->tk_action = call_refreshresult;
+	task->tk_status = 0;
+	task->tk_client->cl_stats->rpcauthrefresh++;
+	rpcauth_refreshcred(task);
+}
+
+/*
+ * 2b.	Process the results of a credential refresh
+ */
+static void
+call_refreshresult(struct rpc_task *task)
+{
+	int status = task->tk_status;
+
+	dprint_status(task);
+
+	task->tk_status = 0;
+	task->tk_action = call_bind;
+	if (status >= 0 && rpcauth_uptodatecred(task))
+		return;
+	switch (status) {
+	case -EACCES:
+		rpc_exit(task, -EACCES);
+		return;
+	case -ENOMEM:
+		rpc_exit(task, -ENOMEM);
+		return;
+	case -ETIMEDOUT:
+		rpc_delay(task, 3*HZ);
+	}
+	task->tk_action = call_refresh;
+}
+
 static inline int
 rpc_task_need_encode(struct rpc_task *task)
 {
@@ -1472,43 +1593,6 @@ out_retry:
 	}
 }
 
-/*
- * 8.	Refresh the credentials if rejected by the server
- */
-static void
-call_refresh(struct rpc_task *task)
-{
-	dprint_status(task);
-
-	task->tk_action = call_refreshresult;
-	task->tk_status = 0;
-	task->tk_client->cl_stats->rpcauthrefresh++;
-	rpcauth_refreshcred(task);
-}
-
-/*
- * 8a.	Process the results of a credential refresh
- */
-static void
-call_refreshresult(struct rpc_task *task)
-{
-	int status = task->tk_status;
-
-	dprint_status(task);
-
-	task->tk_status = 0;
-	task->tk_action = call_reserve;
-	if (status >= 0 && rpcauth_uptodatecred(task))
-		return;
-	if (status == -EACCES) {
-		rpc_exit(task, -EACCES);
-		return;
-	}
-	task->tk_action = call_refresh;
-	if (status != -ETIMEDOUT)
-		rpc_delay(task, 3*HZ);
-}
-
 static __be32 *
 rpc_encode_header(struct rpc_task *task)
 {
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 4a843b883b8..cace6049e4a 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -246,17 +246,8 @@ static inline void rpc_task_set_debuginfo(struct rpc_task *task)
 
 static void rpc_set_active(struct rpc_task *task)
 {
-	struct rpc_clnt *clnt;
-	if (test_and_set_bit(RPC_TASK_ACTIVE, &task->tk_runstate) != 0)
-		return;
 	rpc_task_set_debuginfo(task);
-	/* Add to global list of all tasks */
-	clnt = task->tk_client;
-	if (clnt != NULL) {
-		spin_lock(&clnt->cl_lock);
-		list_add_tail(&task->tk_task, &clnt->cl_tasks);
-		spin_unlock(&clnt->cl_lock);
-	}
+	set_bit(RPC_TASK_ACTIVE, &task->tk_runstate);
 }
 
 /*
@@ -319,11 +310,6 @@ static void __rpc_sleep_on(struct rpc_wait_queue *q, struct rpc_task *task,
 	dprintk("RPC: %5u sleep_on(queue \"%s\" time %lu)\n",
 			task->tk_pid, rpc_qname(q), jiffies);
 
-	if (!RPC_IS_ASYNC(task) && !RPC_IS_ACTIVATED(task)) {
-		printk(KERN_ERR "RPC: Inactive synchronous task put to sleep!\n");
-		return;
-	}
-
 	__rpc_add_wait_queue(q, task);
 
 	BUG_ON(task->tk_callback != NULL);
@@ -334,8 +320,8 @@ static void __rpc_sleep_on(struct rpc_wait_queue *q, struct rpc_task *task,
 void rpc_sleep_on(struct rpc_wait_queue *q, struct rpc_task *task,
 				rpc_action action)
 {
-	/* Mark the task as being activated if so needed */
-	rpc_set_active(task);
+	/* We shouldn't ever put an inactive task to sleep */
+	BUG_ON(!RPC_IS_ACTIVATED(task));
 
 	/*
 	 * Protect the queue operations.
@@ -406,14 +392,6 @@ void rpc_wake_up_queued_task(struct rpc_wait_queue *queue, struct rpc_task *task
 EXPORT_SYMBOL_GPL(rpc_wake_up_queued_task);
 
 /*
- * Wake up the specified task
- */
-static void rpc_wake_up_task(struct rpc_task *task)
-{
-	rpc_wake_up_queued_task(task->tk_waitqueue, task);
-}
-
-/*
  * Wake up the next task on a priority queue.
  */
 static struct rpc_task * __rpc_wake_up_next_priority(struct rpc_wait_queue *queue)
@@ -600,7 +578,15 @@ void rpc_exit_task(struct rpc_task *task)
 		}
 	}
 }
-EXPORT_SYMBOL_GPL(rpc_exit_task);
+
+void rpc_exit(struct rpc_task *task, int status)
+{
+	task->tk_status = status;
+	task->tk_action = rpc_exit_task;
+	if (RPC_IS_QUEUED(task))
+		rpc_wake_up_queued_task(task->tk_waitqueue, task);
+}
+EXPORT_SYMBOL_GPL(rpc_exit);
 
 void rpc_release_calldata(const struct rpc_call_ops *ops, void *calldata)
 {
@@ -690,7 +676,6 @@ static void __rpc_execute(struct rpc_task *task)
 			dprintk("RPC: %5u got signal\n", task->tk_pid);
 			task->tk_flags |= RPC_TASK_KILLED;
 			rpc_exit(task, -ERESTARTSYS);
-			rpc_wake_up_task(task);
 		}
 		rpc_set_running(task);
 		dprintk("RPC: %5u sync task resuming\n", task->tk_pid);
@@ -714,8 +699,9 @@ static void __rpc_execute(struct rpc_task *task)
 void rpc_execute(struct rpc_task *task)
 {
 	rpc_set_active(task);
-	rpc_set_running(task);
-	__rpc_execute(task);
+	rpc_make_runnable(task);
+	if (!RPC_IS_ASYNC(task))
+		__rpc_execute(task);
 }
 
 static void rpc_async_schedule(struct work_struct *work)
@@ -808,26 +794,9 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta
 	/* Initialize workqueue for async tasks */
 	task->tk_workqueue = task_setup_data->workqueue;
 
-	task->tk_client = task_setup_data->rpc_client;
-	if (task->tk_client != NULL) {
-		kref_get(&task->tk_client->cl_kref);
-		if (task->tk_client->cl_softrtry)
-			task->tk_flags |= RPC_TASK_SOFT;
-	}
-
 	if (task->tk_ops->rpc_call_prepare != NULL)
 		task->tk_action = rpc_prepare_task;
 
-	if (task_setup_data->rpc_message != NULL) {
-		task->tk_msg.rpc_proc = task_setup_data->rpc_message->rpc_proc;
-		task->tk_msg.rpc_argp = task_setup_data->rpc_message->rpc_argp;
-		task->tk_msg.rpc_resp = task_setup_data->rpc_message->rpc_resp;
-		/* Bind the user cred */
-		rpcauth_bindcred(task, task_setup_data->rpc_message->rpc_cred, task_setup_data->flags);
-		if (task->tk_action == NULL)
-			rpc_call_start(task);
-	}
-
 	/* starting timestamp */
 	task->tk_start = ktime_get();
 
@@ -896,11 +865,8 @@ void rpc_put_task(struct rpc_task *task)
 	if (task->tk_rqstp)
 		xprt_release(task);
 	if (task->tk_msg.rpc_cred)
-		rpcauth_unbindcred(task);
-	if (task->tk_client) {
-		rpc_release_client(task->tk_client);
-		task->tk_client = NULL;
-	}
+		put_rpccred(task->tk_msg.rpc_cred);
+	rpc_task_release_client(task);
 	if (task->tk_workqueue != NULL) {
 		INIT_WORK(&task->u.tk_work, rpc_async_release);
 		queue_work(task->tk_workqueue, &task->u.tk_work);
@@ -913,13 +879,6 @@ static void rpc_release_task(struct rpc_task *task)
 {
 	dprintk("RPC: %5u release task\n", task->tk_pid);
 
-	if (!list_empty(&task->tk_task)) {
-		struct rpc_clnt *clnt = task->tk_client;
-		/* Remove from client task list */
-		spin_lock(&clnt->cl_lock);
-		list_del(&task->tk_task);
-		spin_unlock(&clnt->cl_lock);
-	}
 	BUG_ON (RPC_IS_QUEUED(task));
 
 	/* Wake up anyone who is waiting for task completion */
@@ -928,35 +887,6 @@ static void rpc_release_task(struct rpc_task *task)
 	rpc_put_task(task);
 }
 
-/*
- * Kill all tasks for the given client.
- * XXX: kill their descendants as well?
- */
-void rpc_killall_tasks(struct rpc_clnt *clnt)
-{
-	struct rpc_task	*rovr;
-
-
-	if (list_empty(&clnt->cl_tasks))
-		return;
-	dprintk("RPC:       killing all tasks for client %p\n", clnt);
-	/*
-	 * Spin lock all_tasks to prevent changes...
-	 */
-	spin_lock(&clnt->cl_lock);
-	list_for_each_entry(rovr, &clnt->cl_tasks, tk_task) {
-		if (! RPC_IS_ACTIVATED(rovr))
-			continue;
-		if (!(rovr->tk_flags & RPC_TASK_KILLED)) {
-			rovr->tk_flags |= RPC_TASK_KILLED;
-			rpc_exit(rovr, -EIO);
-			rpc_wake_up_task(rovr);
-		}
-	}
-	spin_unlock(&clnt->cl_lock);
-}
-EXPORT_SYMBOL_GPL(rpc_killall_tasks);
-
 int rpciod_up(void)
 {
 	return try_module_get(THIS_MODULE) ? 0 : -EINVAL;
diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c
index f438347d817..c0d085013a2 100644
--- a/net/sunrpc/sunrpc_syms.c
+++ b/net/sunrpc/sunrpc_syms.c
@@ -33,21 +33,27 @@ init_sunrpc(void)
 	if (err)
 		goto out;
 	err = rpc_init_mempool();
-	if (err) {
-		unregister_rpc_pipefs();
-		goto out;
-	}
+	if (err)
+		goto out2;
+	err = rpcauth_init_module();
+	if (err)
+		goto out3;
 #ifdef RPC_DEBUG
 	rpc_register_sysctl();
 #endif
 #ifdef CONFIG_PROC_FS
 	rpc_proc_init();
 #endif
+	cache_initialize();
 	cache_register(&ip_map_cache);
 	cache_register(&unix_gid_cache);
 	svc_init_xprt_sock();	/* svc sock transport */
 	init_socket_xprt();	/* clnt sock transport */
-	rpcauth_init_module();
+	return 0;
+out3:
+	rpc_destroy_mempool();
+out2:
+	unregister_rpc_pipefs();
 out:
 	return err;
 }
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index dcd0132396b..970fb00f388 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1032,6 +1032,8 @@ void xprt_release(struct rpc_task *task)
 	spin_unlock_bh(&xprt->transport_lock);
 	if (req->rq_buffer)
 		xprt->ops->buf_free(req->rq_buffer);
+	if (req->rq_cred != NULL)
+		put_rpccred(req->rq_cred);
 	task->tk_rqstp = NULL;
 	if (req->rq_release_snd_buf)
 		req->rq_release_snd_buf(req);
@@ -1129,6 +1131,7 @@ static void xprt_destroy(struct kref *kref)
 	rpc_destroy_wait_queue(&xprt->sending);
 	rpc_destroy_wait_queue(&xprt->resend);
 	rpc_destroy_wait_queue(&xprt->backlog);
+	cancel_work_sync(&xprt->task_cleanup);
 	/*
 	 * Tear down transport state and free the rpc_xprt
 	 */
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
index a681998a871..ebf5e0c368e 100644
--- a/samples/kprobes/kprobe_example.c
+++ b/samples/kprobes/kprobe_example.c
@@ -32,6 +32,11 @@ static int handler_pre(struct kprobe *p, struct pt_regs *regs)
 			" msr = 0x%lx\n",
 		p->addr, regs->nip, regs->msr);
 #endif
+#ifdef CONFIG_MIPS
+	printk(KERN_INFO "pre_handler: p->addr = 0x%p, epc = 0x%lx,"
+			" status = 0x%lx\n",
+		p->addr, regs->cp0_epc, regs->cp0_status);
+#endif
 
 	/* A dump_stack() here will give a stack backtrace */
 	return 0;
@@ -49,6 +54,10 @@ static void handler_post(struct kprobe *p, struct pt_regs *regs,
 	printk(KERN_INFO "post_handler: p->addr = 0x%p, msr = 0x%lx\n",
 		p->addr, regs->msr);
 #endif
+#ifdef CONFIG_MIPS
+	printk(KERN_INFO "post_handler: p->addr = 0x%p, status = 0x%lx\n",
+		p->addr, regs->cp0_status);
+#endif
 }
 
 /*
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index e4deb73e9a8..a1a5cf95a68 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -115,7 +115,10 @@ endif
 # ---------------------------------------------------------------------------
 
 # Default is built-in, unless we know otherwise
-modkern_cflags = $(if $(part-of-module), $(CFLAGS_MODULE), $(CFLAGS_KERNEL))
+modkern_cflags =                                          \
+	$(if $(part-of-module),                           \
+		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
+		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
 quiet_modtag := $(empty)   $(empty)
 
 $(real-objs-m)        : part-of-module := y
@@ -156,14 +159,14 @@ $(obj)/%.i: $(src)/%.c FORCE
 
 cmd_gensymtypes =                                                           \
     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
-    $(GENKSYMS) -T $@ -a $(ARCH)                                            \
+    $(GENKSYMS) $(if $(1), -T $(2)) -a $(ARCH)                              \
      $(if $(KBUILD_PRESERVE),-p)                                            \
-     $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
+     -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
 
 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
 cmd_cc_symtypes_c =                                                         \
     set -e;                                                                 \
-    $(call cmd_gensymtypes, true) >/dev/null;                               \
+    $(call cmd_gensymtypes,true,$@) >/dev/null;                             \
     test -s $@ || rm -f $@
 
 $(obj)/%.symtypes : $(src)/%.c FORCE
@@ -192,16 +195,16 @@ else
 #   the actual value of the checksum generated by genksyms
 
 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
-cmd_modversions =							\
-	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then	\
-		$(call cmd_gensymtypes, $(KBUILD_SYMTYPES))		\
-		    > $(@D)/.tmp_$(@F:.o=.ver);				\
-									\
-		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 		\
-			-T $(@D)/.tmp_$(@F:.o=.ver);			\
-		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);	\
-	else								\
-		mv -f $(@D)/.tmp_$(@F) $@;				\
+cmd_modversions =								\
+	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then		\
+		$(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))	\
+		    > $(@D)/.tmp_$(@F:.o=.ver);					\
+										\
+		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 			\
+			-T $(@D)/.tmp_$(@F:.o=.ver);				\
+		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);		\
+	else									\
+		mv -f $(@D)/.tmp_$(@F) $@;					\
 	fi;
 endif
 
@@ -248,10 +251,10 @@ $(obj)/%.lst: $(src)/%.c FORCE
 # Compile assembler sources (.S)
 # ---------------------------------------------------------------------------
 
-modkern_aflags := $(AFLAGS_KERNEL)
+modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
 
-$(real-objs-m)      : modkern_aflags := $(AFLAGS_MODULE)
-$(real-objs-m:.o=.s): modkern_aflags := $(AFLAGS_MODULE)
+$(real-objs-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
+$(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
 
 quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
 cmd_as_s_S       = $(CPP) $(a_flags)   -o $@ $< 
diff --git a/scripts/Makefile.help b/scripts/Makefile.help
new file mode 100644
index 00000000000..d03608f5db0
--- /dev/null
+++ b/scripts/Makefile.help
@@ -0,0 +1,3 @@
+
+checker-help:
+	@echo  '  coccicheck      - Check with Coccinelle.'
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 8f14c81abbc..7d22056582c 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -30,7 +30,7 @@
 #     - See include/linux/module.h for more details
 
 # Step 4 is solely used to allow module versioning in external modules,
-# where the CRC of each module is retrieved from the Module.symers file.
+# where the CRC of each module is retrieved from the Module.symvers file.
 
 # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
 # symbols in the final module linking stage
@@ -107,7 +107,7 @@ $(modules:.ko=.mod.c): __modpost ;
 modname = $(notdir $(@:.mod.o=))
 
 quiet_cmd_cc_o_c = CC      $@
-      cmd_cc_o_c = $(CC) $(c_flags) $(CFLAGS_MODULE)	\
+      cmd_cc_o_c = $(CC) $(c_flags) $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE) \
 		   -c -o $@ $<
 
 $(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE
@@ -117,8 +117,9 @@ targets += $(modules:.ko=.mod.o)
 
 # Step 6), final link of the modules
 quiet_cmd_ld_ko_o = LD [M]  $@
-      cmd_ld_ko_o = $(LD) -r $(LDFLAGS) $(LDFLAGS_MODULE) -o $@		\
-			  $(filter-out FORCE,$^)
+      cmd_ld_ko_o = $(LD) -r $(LDFLAGS)                                 \
+                             $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
+                             -o $@ $(filter-out FORCE,$^)
 
 $(modules): %.ko :%.o %.mod.o FORCE
 	$(call if_changed,ld_ko_o)
diff --git a/scripts/checkkconfigsymbols.sh b/scripts/checkkconfigsymbols.sh
index 46be3c5a62b..2ca49bb31ef 100755
--- a/scripts/checkkconfigsymbols.sh
+++ b/scripts/checkkconfigsymbols.sh
@@ -14,7 +14,7 @@ find $paths -name '*.[chS]' -o -name 'Makefile' -o -name 'Makefile*[^~]'| while
 do
 	# Output the bare Kconfig variable and the filename; the _MODULE part at
 	# the end is not removed here (would need perl an not-hungry regexp for that).
-	sed -ne 's!^.*\<\(UML_\)\?CONFIG_\([0-9A-Z_]\+\).*!\2 '$i'!p' < $i
+	sed -ne 's!^.*\<\(UML_\)\?CONFIG_\([0-9A-Za-z_]\+\).*!\2 '$i'!p' < $i
 done | \
 # Smart "sort|uniq" implemented in awk and tuned to collect the names of all
 # files which use a given symbol
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index bd88f11b095..2039acdf512 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -195,7 +195,7 @@ our $typeTypedefs = qr{(?x:
 our $logFunctions = qr{(?x:
 	printk|
 	pr_(debug|dbg|vdbg|devel|info|warning|err|notice|alert|crit|emerg|cont)|
-	dev_(printk|dbg|vdbg|info|warn|err|notice|alert|crit|emerg|WARN)|
+	(dev|netdev|netif)_(printk|dbg|vdbg|info|warn|err|notice|alert|crit|emerg|WARN)|
 	WARN|
 	panic
 )};
@@ -224,6 +224,12 @@ our @modifierList = (
 	qr{fastcall},
 );
 
+our $allowed_asm_includes = qr{(?x:
+	irq|
+	memory
+)};
+# memory.h: ARM has a custom one
+
 sub build_types {
 	my $mods = "(?x:  \n" . join("|\n  ", @modifierList) . "\n)";
 	my $all = "(?x:  \n" . join("|\n  ", @typeList) . "\n)";
@@ -552,6 +558,9 @@ sub ctx_statement_block {
 			$type = ($level != 0)? '{' : '';
 
 			if ($level == 0) {
+				if (substr($blk, $off + 1, 1) eq ';') {
+					$off++;
+				}
 				last;
 			}
 		}
@@ -1403,7 +1412,8 @@ sub process {
 #80 column limit
 		if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
 		    $rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
-		    $line !~ /^\+\s*$logFunctions\s*\(\s*(?:KERN_\S+\s*)?"[X\t]*"\s*(?:,|\)\s*;)\s*$/ &&
+		    !($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:,|\)\s*;)\s*$/ ||
+		    $line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) &&
 		    $length > 80)
 		{
 			WARN("line over 80 characters\n" . $herecurr);
@@ -1448,6 +1458,13 @@ sub process {
 			WARN("please, no space before tabs\n" . $herevet);
 		}
 
+# check for spaces at the beginning of a line.
+		if ($rawline =~ /^\+ / && $rawline !~ /\+ +\*/)  {
+			my $herevet = "$here\n" . cat_vet($rawline) . "\n";
+			WARN("please, no space for starting a line, \
+				excluding comments\n" . $herevet);
+		}
+
 # check we are in a valid C source file if not then ignore this hunk
 		next if ($realfile !~ /\.(h|c)$/);
 
@@ -1778,9 +1795,9 @@ sub process {
 			WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
 		}
 
-# check for external initialisers.
+# check for global initialisers.
 		if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
-			ERROR("do not initialise externals to 0 or NULL\n" .
+			ERROR("do not initialise globals to 0 or NULL\n" .
 				$herecurr);
 		}
 # check for static initialisers.
@@ -2308,7 +2325,7 @@ sub process {
 			my $checkfile = "include/linux/$file";
 			if (-f "$root/$checkfile" &&
 			    $realfile ne $checkfile &&
-			    $1 ne 'irq')
+			    $1 !~ /$allowed_asm_includes/)
 			{
 				if ($realfile =~ m{^arch/}) {
 					CHK("Consider using #include <linux/$file> instead of <asm/$file>\n" . $herecurr);
@@ -2570,6 +2587,21 @@ sub process {
 			}
 		}
 
+# prefer usleep_range over udelay
+		if ($line =~ /\budelay\s*\(\s*(\w+)\s*\)/) {
+			# ignore udelay's < 10, however
+			if (! (($1 =~ /(\d+)/) && ($1 < 10)) ) {
+				CHK("usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $line);
+			}
+		}
+
+# warn about unexpectedly long msleep's
+		if ($line =~ /\bmsleep\s*\((\d+)\);/) {
+			if ($1 < 20) {
+				WARN("msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $line);
+			}
+		}
+
 # warn about #ifdefs in C files
 #		if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
 #			print "#ifdef in C files should be avoided\n";
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index 66ad375612f..6bb42e72e0e 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -183,7 +183,6 @@ cat << EOF
 #define __IGNORE_ustat		/* statfs */
 #define __IGNORE_utime		/* utimes */
 #define __IGNORE_vfork		/* clone */
-#define __IGNORE_wait4		/* waitid */
 
 /* sync_file_range had a stupid ABI. Allow sync_file_range2 instead */
 #ifdef __NR_sync_file_range2
diff --git a/scripts/coccicheck b/scripts/coccicheck
new file mode 100755
index 00000000000..b8bcf1f7bed
--- /dev/null
+++ b/scripts/coccicheck
@@ -0,0 +1,80 @@
+#!/bin/sh
+
+SPATCH="`which ${SPATCH:=spatch}`"
+
+if [ "$C" = "1" -o "$C" = "2" ]; then
+    ONLINE=1
+
+# This requires Coccinelle >= 0.2.3
+#    FLAGS="-ignore_unknown_options -very_quiet"
+#    OPTIONS=$*
+
+# Workaround for Coccinelle < 0.2.3
+    FLAGS="-I $srctree/include -very_quiet"
+    shift $(( $# - 1 ))
+    OPTIONS=$1
+else
+    ONLINE=0
+    FLAGS="-very_quiet"
+fi
+
+if [ ! -x "$SPATCH" ]; then
+    echo 'spatch is part of the Coccinelle project and is available at http://coccinelle.lip6.fr/'
+    exit 1
+fi
+
+if [ "$MODE" = "" ] ; then
+    if [ "$ONLINE" = "0" ] ; then
+	echo 'You have not explicitly specify the mode to use. Fallback to "report".'
+	echo 'You can specify the mode with "make coccicheck MODE=<mode>"'
+	echo 'Available modes are: report, patch, context, org'
+    fi
+    MODE="report"
+fi
+
+if [ "$ONLINE" = "0" ] ; then
+    echo ''
+    echo 'Please check for false positives in the output before submitting a patch.'
+    echo 'When using "patch" mode, carefully review the patch before submitting it.'
+    echo ''
+fi
+
+coccinelle () {
+    COCCI="$1"
+
+    OPT=`grep "Option" $COCCI | cut -d':' -f2`
+
+#   The option '-parse_cocci' can be used to syntaxically check the SmPL files.
+#
+#    $SPATCH -D $MODE $FLAGS -parse_cocci $COCCI $OPT > /dev/null
+
+    if [ "$ONLINE" = "0" ] ; then
+
+	FILE=`echo $COCCI | sed "s|$srctree/||"`
+
+	echo "Processing `basename $COCCI` with option(s) \"$OPT\""
+	echo 'Message example to submit a patch:'
+
+	sed -e '/\/\/\//!d' -e 's|^///||' $COCCI
+
+	echo ' The semantic patch that makes this change is available'
+	echo " in $FILE."
+	echo ''
+	echo ' More information about semantic patching is available at'
+	echo ' http://coccinelle.lip6.fr/'
+	echo ''
+
+	$SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT -dir $srctree || exit 1
+    else
+	$SPATCH -D $MODE $FLAGS -sp_file $COCCI $OPT $OPTIONS || exit 1
+    fi
+
+}
+
+if [ "$COCCI" = "" ] ; then
+    for f in `find $srctree/scripts/coccinelle/ -name '*.cocci' -type f | sort`; do
+	coccinelle $f
+    done
+else
+    coccinelle $COCCI
+fi
diff --git a/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci b/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
new file mode 100644
index 00000000000..7d4771d449c
--- /dev/null
+++ b/scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
@@ -0,0 +1,67 @@
+///
+/// Casting (void *) value returned by kmalloc is useless
+/// as mentioned in Documentation/CodingStyle, Chap 14.
+///
+// Confidence: High
+// Copyright: 2009,2010 Nicolas Palix, DIKU.  GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Options: -no_includes -include_headers
+//
+// Keywords: kmalloc, kzalloc, kcalloc
+// Version min: < 2.6.12 kmalloc
+// Version min: < 2.6.12 kcalloc
+// Version min:   2.6.14 kzalloc
+//
+
+virtual context
+virtual patch
+virtual org
+virtual report
+
+//----------------------------------------------------------
+//  For context mode
+//----------------------------------------------------------
+
+@depends on context@
+type T;
+@@
+
+* (T *)
+  \(kmalloc\|kzalloc\|kcalloc\)(...)
+
+//----------------------------------------------------------
+//  For patch mode
+//----------------------------------------------------------
+
+@depends on patch@
+type T;
+@@
+
+- (T *)
+  \(kmalloc\|kzalloc\|kcalloc\)(...)
+
+//----------------------------------------------------------
+//  For org and report mode
+//----------------------------------------------------------
+
+@r depends on org || report@
+type T;
+position p;
+@@
+
+ (T@p *)\(kmalloc\|kzalloc\|kcalloc\)(...)
+
+@script:python depends on org@
+p << r.p;
+t << r.T;
+@@
+
+coccilib.org.print_safe_todo(p[0], t)
+
+@script:python depends on report@
+p << r.p;
+t << r.T;
+@@
+
+msg="WARNING: casting value returned by k[cmz]alloc to (%s *) is useless." % (t)
+coccilib.report.print_report(p[0], msg)
diff --git a/scripts/coccinelle/alloc/kzalloc-simple.cocci b/scripts/coccinelle/alloc/kzalloc-simple.cocci
new file mode 100644
index 00000000000..2eae828fc65
--- /dev/null
+++ b/scripts/coccinelle/alloc/kzalloc-simple.cocci
@@ -0,0 +1,82 @@
+///
+/// kzalloc should be used rather than kmalloc followed by memset 0
+///
+// Confidence: High
+// Copyright: (C) 2009-2010 Julia Lawall, Nicolas Palix, DIKU.  GPLv2.
+// Copyright: (C) 2009-2010 Gilles Muller, INRIA/LiP6.  GPLv2.
+// URL: http://coccinelle.lip6.fr/rules/kzalloc.html
+// Options: -no_includes -include_headers
+//
+// Keywords: kmalloc, kzalloc
+// Version min: < 2.6.12 kmalloc
+// Version min:   2.6.14 kzalloc
+//
+
+virtual context
+virtual patch
+virtual org
+virtual report
+
+//----------------------------------------------------------
+//  For context mode
+//----------------------------------------------------------
+
+@depends on context@
+type T, T2;
+expression x;
+expression E1,E2;
+statement S;
+@@
+
+* x = (T)kmalloc(E1,E2);
+  if ((x==NULL) || ...) S
+* memset((T2)x,0,E1);
+
+//----------------------------------------------------------
+//  For patch mode
+//----------------------------------------------------------
+
+@depends on patch@
+type T, T2;
+expression x;
+expression E1,E2;
+statement S;
+@@
+
+- x = (T)kmalloc(E1,E2);
++ x = kzalloc(E1,E2);
+  if ((x==NULL) || ...) S
+- memset((T2)x,0,E1);
+
+//----------------------------------------------------------
+//  For org mode
+//----------------------------------------------------------
+
+@r depends on org || report@
+type T, T2;
+expression x;
+expression E1,E2;
+statement S;
+position p;
+@@
+
+ x = (T)kmalloc@p(E1,E2);
+ if ((x==NULL) || ...) S
+ memset((T2)x,0,E1);
+
+@script:python depends on org@
+p << r.p;
+x << r.x;
+@@
+
+msg="%s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+
+@script:python depends on report@
+p << r.p;
+x << r.x;
+@@
+
+msg="WARNING: kzalloc should be used for %s, instead of kmalloc/memset" % (x)
+coccilib.report.print_report(p[0], msg)
diff --git a/scripts/coccinelle/deref_null.cocci b/scripts/coccinelle/deref_null.cocci
new file mode 100644
index 00000000000..9969d76d0f4
--- /dev/null
+++ b/scripts/coccinelle/deref_null.cocci
@@ -0,0 +1,293 @@
+///
+/// A variable is dereference under a NULL test.
+/// Even though it is know to be NULL.
+///
+// Confidence: Moderate
+// Copyright: (C) 2010 Nicolas Palix, DIKU.  GPLv2.
+// Copyright: (C) 2010 Julia Lawall, DIKU.  GPLv2.
+// Copyright: (C) 2010 Gilles Muller, INRIA/LiP6.  GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Comments: -I ... -all_includes can give more complete results
+// Options:
+
+virtual context
+virtual patch
+virtual org
+virtual report
+
+@initialize:python depends on !context && patch && !org && !report@
+
+import sys
+print >> sys.stderr, "This semantic patch does not support the 'patch' mode."
+
+@depends on patch@
+@@
+
+this_rule_should_never_matches();
+
+@ifm depends on !patch@
+expression *E;
+statement S1,S2;
+position p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...) S1 else S2
+
+// The following two rules are separate, because both can match a single
+// expression in different ways
+@pr1 depends on !patch expression@
+expression *ifm.E;
+identifier f;
+position p1;
+@@
+
+ (E != NULL && ...) ? <+...E->f@p1...+> : ...
+
+@pr2 depends on !patch expression@
+expression *ifm.E;
+identifier f;
+position p2;
+@@
+
+(
+  (E != NULL) && ... && <+...E->f@p2...+>
+|
+  (E == NULL) || ... || <+...E->f@p2...+>
+|
+ sizeof(<+...E->f@p2...+>)
+)
+
+// For org and report modes
+
+@r depends on !context && !patch && (org || report) exists@
+expression subE <= ifm.E;
+expression *ifm.E;
+expression E1,E2;
+identifier f;
+statement S1,S2,S3,S4;
+iterator iter;
+position p!={pr1.p1,pr2.p2};
+position ifm.p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...)
+{
+  ... when != if (...) S1 else S2
+(
+ iter(subE,...) S4 // no use
+|
+ list_remove_head(E2,subE,...)
+|
+ subE = E1
+|
+ for(subE = E1;...;...) S4
+|
+ subE++
+|
+ ++subE
+|
+ --subE
+|
+ subE--
+|
+ &subE
+|
+ E->f@p // bad use
+)
+  ... when any
+  return ...;
+}
+else S3
+
+@script:python depends on !context && !patch && !org && report@
+p << r.p;
+p1 << ifm.p1;
+x << ifm.E;
+@@
+
+msg="ERROR: %s is NULL but dereferenced." % (x)
+coccilib.report.print_report(p[0], msg)
+cocci.include_match(False)
+
+@script:python depends on !context && !patch && org && !report@
+p << r.p;
+p1 << ifm.p1;
+x << ifm.E;
+@@
+
+msg="ERROR: %s is NULL but dereferenced." % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+cocci.print_main(msg_safe,p)
+cocci.include_match(False)
+
+@s depends on !context && !patch && (org || report) exists@
+expression subE <= ifm.E;
+expression *ifm.E;
+expression E1,E2;
+identifier f;
+statement S1,S2,S3,S4;
+iterator iter;
+position p!={pr1.p1,pr2.p2};
+position ifm.p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...)
+{
+  ... when != if (...) S1 else S2
+(
+ iter(subE,...) S4 // no use
+|
+ list_remove_head(E2,subE,...)
+|
+ subE = E1
+|
+ for(subE = E1;...;...) S4
+|
+ subE++
+|
+ ++subE
+|
+ --subE
+|
+ subE--
+|
+ &subE
+|
+ E->f@p // bad use
+)
+  ... when any
+}
+else S3
+
+@script:python depends on !context && !patch && !org && report@
+p << s.p;
+p1 << ifm.p1;
+x << ifm.E;
+@@
+
+msg="ERROR: %s is NULL but dereferenced." % (x)
+coccilib.report.print_report(p[0], msg)
+
+@script:python depends on !context && !patch && org && !report@
+p << s.p;
+p1 << ifm.p1;
+x << ifm.E;
+@@
+
+msg="ERROR: %s is NULL but dereferenced." % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+cocci.print_main(msg_safe,p)
+
+// For context mode
+
+@depends on context && !patch && !org && !report exists@
+expression subE <= ifm.E;
+expression *ifm.E;
+expression E1,E2;
+identifier f;
+statement S1,S2,S3,S4;
+iterator iter;
+position p!={pr1.p1,pr2.p2};
+position ifm.p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...)
+{
+  ... when != if (...) S1 else S2
+(
+ iter(subE,...) S4 // no use
+|
+ list_remove_head(E2,subE,...)
+|
+ subE = E1
+|
+ for(subE = E1;...;...) S4
+|
+ subE++
+|
+ ++subE
+|
+ --subE
+|
+ subE--
+|
+ &subE
+|
+* E->f@p // bad use
+)
+  ... when any
+  return ...;
+}
+else S3
+
+// The following three rules are duplicates of ifm, pr1 and pr2 respectively.
+// It is need because the previous rule as already made a "change".
+
+@ifm1 depends on !patch@
+expression *E;
+statement S1,S2;
+position p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...) S1 else S2
+
+@pr11 depends on !patch expression@
+expression *ifm1.E;
+identifier f;
+position p1;
+@@
+
+ (E != NULL && ...) ? <+...E->f@p1...+> : ...
+
+@pr12 depends on !patch expression@
+expression *ifm1.E;
+identifier f;
+position p2;
+@@
+
+(
+  (E != NULL) && ... && <+...E->f@p2...+>
+|
+  (E == NULL) || ... || <+...E->f@p2...+>
+|
+ sizeof(<+...E->f@p2...+>)
+)
+
+@depends on context && !patch && !org && !report exists@
+expression subE <= ifm1.E;
+expression *ifm1.E;
+expression E1,E2;
+identifier f;
+statement S1,S2,S3,S4;
+iterator iter;
+position p!={pr11.p1,pr12.p2};
+position ifm1.p1;
+@@
+
+if@p1 ((E == NULL && ...) || ...)
+{
+  ... when != if (...) S1 else S2
+(
+ iter(subE,...) S4 // no use
+|
+ list_remove_head(E2,subE,...)
+|
+ subE = E1
+|
+ for(subE = E1;...;...) S4
+|
+ subE++
+|
+ ++subE
+|
+ --subE
+|
+ subE--
+|
+ &subE
+|
+* E->f@p // bad use
+)
+  ... when any
+}
+else S3
diff --git a/scripts/coccinelle/err_cast.cocci b/scripts/coccinelle/err_cast.cocci
new file mode 100644
index 00000000000..2ce115000af
--- /dev/null
+++ b/scripts/coccinelle/err_cast.cocci
@@ -0,0 +1,56 @@
+///
+/// Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
+///
+// Confidence: High
+// Copyright: (C) 2009, 2010 Nicolas Palix, DIKU.  GPLv2.
+// Copyright: (C) 2009, 2010 Julia Lawall, DIKU.  GPLv2.
+// Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6.  GPLv2.
+// URL: http://coccinelle.lip6.fr/
+// Options:
+//
+// Keywords: ERR_PTR, PTR_ERR, ERR_CAST
+// Version min: 2.6.25
+//
+
+virtual context
+virtual patch
+virtual org
+virtual report
+
+
+@ depends on context && !patch && !org && !report@
+expression x;
+@@
+
+* ERR_PTR(PTR_ERR(x))
+
+@ depends on !context && patch && !org && !report @
+expression x;
+@@
+
+- ERR_PTR(PTR_ERR(x))
++ ERR_CAST(x)
+
+@r depends on !context && !patch && (org || report)@
+expression x;
+position p;
+@@
+
+ ERR_PTR@p(PTR_ERR(x))
+
+@script:python depends on org@
+p << r.p;
+x << r.x;
+@@
+
+msg="WARNING ERR_CAST can be used with %s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+
+@script:python depends on report@
+p << r.p;
+x << r.x;
+@@
+
+msg="WARNING: ERR_CAST can be used with %s" % (x)
+coccilib.report.print_report(p[0], msg)
diff --git a/scripts/coccinelle/resource_size.cocci b/scripts/coccinelle/resource_size.cocci
new file mode 100644
index 00000000000..1935a58b39d
--- /dev/null
+++ b/scripts/coccinelle/resource_size.cocci
@@ -0,0 +1,93 @@
+///
+/// Use resource_size function on resource object
+/// instead of explicit computation.
+///
+//  Confidence: High
+//  Copyright: (C) 2009, 2010 Nicolas Palix, DIKU.  GPLv2.
+//  Copyright: (C) 2009, 2010 Julia Lawall, DIKU.  GPLv2.
+//  Copyright: (C) 2009, 2010 Gilles Muller, INRIA/LiP6.  GPLv2.
+//  URL: http://coccinelle.lip6.fr/
+//  Options:
+//
+//  Keywords: resource_size
+//  Version min: 2.6.27 resource_size
+//
+
+virtual context
+virtual patch
+virtual org
+virtual report
+
+//----------------------------------------------------------
+//  For context mode
+//----------------------------------------------------------
+
+@r_context depends on context && !patch && !org@
+struct resource *res;
+@@
+
+* (res->end - res->start) + 1
+
+//----------------------------------------------------------
+//  For patch mode
+//----------------------------------------------------------
+
+@r_patch depends on !context && patch && !org@
+struct resource *res;
+@@
+
+- (res->end - res->start) + 1
++ resource_size(res)
+
+//----------------------------------------------------------
+//  For org mode
+//----------------------------------------------------------
+
+
+@r_org depends on !context && !patch && (org || report)@
+struct resource *res;
+position p;
+@@
+
+ (res->end@p - res->start) + 1
+
+@rbad_org depends on !context && !patch && (org || report)@
+struct resource *res;
+position p != r_org.p;
+@@
+
+ res->end@p - res->start
+
+@script:python depends on org@
+p << r_org.p;
+x << r_org.res;
+@@
+
+msg="ERROR with %s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+
+@script:python depends on report@
+p << r_org.p;
+x << r_org.res;
+@@
+
+msg="ERROR: Missing resource_size with %s" % (x)
+coccilib.report.print_report(p[0], msg)
+
+@script:python depends on org@
+p << rbad_org.p;
+x << rbad_org.res;
+@@
+
+msg="WARNING with %s" % (x)
+msg_safe=msg.replace("[","@(").replace("]",")")
+coccilib.org.print_todo(p[0], msg_safe)
+
+@script:python depends on report@
+p << rbad_org.p;
+x << rbad_org.res;
+@@
+
+msg="WARNING: Suspicious code. resource_size is maybe missing with %s" % (x)
+coccilib.report.print_report(p[0], msg)
diff --git a/scripts/decodecode b/scripts/decodecode
index 8b30cc36744..18ba881c341 100755
--- a/scripts/decodecode
+++ b/scripts/decodecode
@@ -40,7 +40,7 @@ echo $code
 code=`echo $code | sed -e 's/.*Code: //'`
 
 width=`expr index "$code" ' '`
-width=$[($width-1)/2]
+width=$((($width-1)/2))
 case $width in
 1) type=byte ;;
 2) type=2byte ;;
@@ -48,10 +48,10 @@ case $width in
 esac
 
 disas() {
-	${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s &> /dev/null
+	${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s > /dev/null 2>&1
 
-	if [ "$ARCH" == "arm" ]; then
-		if [ $width == 2 ]; then
+	if [ "$ARCH" = "arm" ]; then
+		if [ $width -eq 2 ]; then
 			OBJDUMPFLAGS="-M force-thumb"
 		fi
 
@@ -59,7 +59,7 @@ disas() {
 	fi
 
 	${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $1.o | \
-		grep -v "/tmp\|Disassembly\|\.text\|^$" &> $1.dis
+		grep -v "/tmp\|Disassembly\|\.text\|^$" > $1.dis 2>&1
 }
 
 marker=`expr index "$code" "\<"`
diff --git a/scripts/dtc/fstree.c b/scripts/dtc/fstree.c
index 766b2694d93..8fe1bdf239f 100644
--- a/scripts/dtc/fstree.c
+++ b/scripts/dtc/fstree.c
@@ -77,6 +77,7 @@ static struct node *read_fstree(const char *dirname)
 		free(tmpnam);
 	}
 
+	closedir(d);
 	return tree;
 }
 
diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore
index 6a36a76e660..624f6502e03 100644
--- a/scripts/kconfig/.gitignore
+++ b/scripts/kconfig/.gitignore
@@ -17,6 +17,7 @@ gconf.glade.h
 #
 conf
 mconf
+nconf
 qconf
 gconf
 kxgettext
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 7ea649da194..de934def410 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -21,17 +21,17 @@ menuconfig: $(obj)/mconf
 	$< $(Kconfig)
 
 config: $(obj)/conf
-	$< $(Kconfig)
+	$< --oldaskconfig $(Kconfig)
 
 nconfig: $(obj)/nconf
 	$< $(Kconfig)
 
 oldconfig: $(obj)/conf
-	$< -o $(Kconfig)
+	$< --$@ $(Kconfig)
 
 silentoldconfig: $(obj)/conf
 	$(Q)mkdir -p include/generated
-	$< -s $(Kconfig)
+	$< --$@ $(Kconfig)
 
 # if no path is given, then use src directory to find file
 ifdef LSMOD
@@ -44,15 +44,15 @@ endif
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)mkdir -p include/generated
 	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
-	$(Q)if [ -f .config ]; then 				\
-			cmp -s .tmp.config .config ||		\
-			(mv -f .config .config.old.1;		\
-			 mv -f .tmp.config .config;		\
-			 $(obj)/conf -s $(Kconfig);		\
-			 mv -f .config.old.1 .config.old)	\
-	else							\
-			mv -f .tmp.config .config;		\
-			$(obj)/conf -s $(Kconfig);		\
+	$(Q)if [ -f .config ]; then 					\
+			cmp -s .tmp.config .config ||			\
+			(mv -f .config .config.old.1;			\
+			 mv -f .tmp.config .config;			\
+			 $(obj)/conf --silentoldconfig $(Kconfig);	\
+			 mv -f .config.old.1 .config.old)		\
+	else								\
+			mv -f .tmp.config .config;			\
+			$(obj)/conf --silentoldconfig $(Kconfig);	\
 	fi
 	$(Q)rm -f .tmp.config
 
@@ -60,15 +60,15 @@ localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)mkdir -p include/generated
 	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
 	$(Q)sed -i s/=m/=y/ .tmp.config
-	$(Q)if [ -f .config ]; then 				\
-			cmp -s .tmp.config .config ||		\
-			(mv -f .config .config.old.1;		\
-			 mv -f .tmp.config .config;		\
-			 $(obj)/conf -s $(Kconfig);		\
-			 mv -f .config.old.1 .config.old)	\
-	else							\
-			mv -f .tmp.config .config;		\
-			$(obj)/conf -s $(Kconfig);		\
+	$(Q)if [ -f .config ]; then					\
+			cmp -s .tmp.config .config ||			\
+			(mv -f .config .config.old.1;			\
+			 mv -f .tmp.config .config;			\
+			 $(obj)/conf --silentoldconfig $(Kconfig);	\
+			 mv -f .config.old.1 .config.old)		\
+	else								\
+			mv -f .tmp.config .config;			\
+			$(obj)/conf --silentoldconfig $(Kconfig);	\
 	fi
 	$(Q)rm -f .tmp.config
 
@@ -95,30 +95,29 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h
 	$(Q)rm -f arch/um/Kconfig.arch
 	$(Q)rm -f $(obj)/config.pot
 
-PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig
+PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig
 
-randconfig: $(obj)/conf
-	$< -r $(Kconfig)
+allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf
+	$< --$@ $(Kconfig)
 
-allyesconfig: $(obj)/conf
-	$< -y $(Kconfig)
+PHONY += listnewconfig oldnoconfig savedefconfig defconfig
 
-allnoconfig: $(obj)/conf
-	$< -n $(Kconfig)
+listnewconfig oldnoconfig: $(obj)/conf
+	$< --$@ $(Kconfig)
 
-allmodconfig: $(obj)/conf
-	$< -m $(Kconfig)
+savedefconfig: $(obj)/conf
+	$< --$@=defconfig $(Kconfig)
 
 defconfig: $(obj)/conf
 ifeq ($(KBUILD_DEFCONFIG),)
-	$< -d $(Kconfig)
+	$< --defconfig $(Kconfig)
 else
 	@echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'"
-	$(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
+	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig)
 endif
 
 %_defconfig: $(obj)/conf
-	$(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig)
+	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
 
 # Help text used by make help
 help:
@@ -131,11 +130,15 @@ help:
 	@echo  '  localmodconfig  - Update current config disabling modules not loaded'
 	@echo  '  localyesconfig  - Update current config converting local mods to core'
 	@echo  '  silentoldconfig - Same as oldconfig, but quietly, additionally update deps'
-	@echo  '  randconfig	  - New config with random answer to all options'
-	@echo  '  defconfig	  - New config with default answer to all options'
-	@echo  '  allmodconfig	  - New config selecting modules when possible'
-	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
+	@echo  '  defconfig	  - New config with default from ARCH supplied defconfig'
+	@echo  '  savedefconfig   - Save current config as ./defconfig (minimal config)'
 	@echo  '  allnoconfig	  - New config where all options are answered with no'
+	@echo  '  allyesconfig	  - New config where all options are accepted with yes'
+	@echo  '  allmodconfig	  - New config selecting modules when possible'
+	@echo  '  alldefconfig    - New config with all symbols set to default'
+	@echo  '  randconfig	  - New config with random answer to all options'
+	@echo  '  listnewconfig   - List new options'
+	@echo  '  oldnoconfig     - Same as silentoldconfig but set new symbols to n (unset)'
 
 # lxdialog stuff
 check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index 9960d1c303f..274f2716b03 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -10,6 +10,7 @@
 #include <string.h>
 #include <time.h>
 #include <unistd.h>
+#include <getopt.h>
 #include <sys/stat.h>
 #include <sys/time.h>
 
@@ -19,16 +20,21 @@
 static void conf(struct menu *menu);
 static void check_conf(struct menu *menu);
 
-enum {
-	ask_all,
-	ask_new,
-	ask_silent,
-	set_default,
-	set_yes,
-	set_mod,
-	set_no,
-	set_random
-} input_mode = ask_all;
+enum input_mode {
+	oldaskconfig,
+	silentoldconfig,
+	oldconfig,
+	allnoconfig,
+	allyesconfig,
+	allmodconfig,
+	alldefconfig,
+	randconfig,
+	defconfig,
+	savedefconfig,
+	listnewconfig,
+	oldnoconfig,
+} input_mode = oldaskconfig;
+
 char *defconfig_file;
 
 static int indent = 1;
@@ -93,14 +99,14 @@ static int conf_askvalue(struct symbol *sym, const char *def)
 	}
 
 	switch (input_mode) {
-	case ask_new:
-	case ask_silent:
+	case oldconfig:
+	case silentoldconfig:
 		if (sym_has_value(sym)) {
 			printf("%s\n", def);
 			return 0;
 		}
 		check_stdin();
-	case ask_all:
+	case oldaskconfig:
 		fflush(stdout);
 		fgets(line, 128, stdin);
 		return 1;
@@ -156,14 +162,12 @@ static int conf_string(struct menu *menu)
 static int conf_sym(struct menu *menu)
 {
 	struct symbol *sym = menu->sym;
-	int type;
 	tristate oldval, newval;
 
 	while (1) {
 		printf("%*s%s ", indent - 1, "", _(menu->prompt->text));
 		if (sym->name)
 			printf("(%s) ", sym->name);
-		type = sym_get_type(sym);
 		putchar('[');
 		oldval = sym_get_tristate_value(sym);
 		switch (oldval) {
@@ -228,11 +232,9 @@ static int conf_choice(struct menu *menu)
 {
 	struct symbol *sym, *def_sym;
 	struct menu *child;
-	int type;
 	bool is_new;
 
 	sym = menu->sym;
-	type = sym_get_type(sym);
 	is_new = !sym_has_value(sym);
 	if (sym_is_changable(sym)) {
 		conf_sym(menu);
@@ -294,15 +296,15 @@ static int conf_choice(struct menu *menu)
 			printf("?");
 		printf("]: ");
 		switch (input_mode) {
-		case ask_new:
-		case ask_silent:
+		case oldconfig:
+		case silentoldconfig:
 			if (!is_new) {
 				cnt = def;
 				printf("%d\n", cnt);
 				break;
 			}
 			check_stdin();
-		case ask_all:
+		case oldaskconfig:
 			fflush(stdout);
 			fgets(line, 128, stdin);
 			strip(line);
@@ -360,7 +362,10 @@ static void conf(struct menu *menu)
 
 		switch (prop->type) {
 		case P_MENU:
-			if (input_mode == ask_silent && rootEntry != menu) {
+			if ((input_mode == silentoldconfig ||
+			     input_mode == listnewconfig ||
+			     input_mode == oldnoconfig) &&
+			    rootEntry != menu) {
 				check_conf(menu);
 				return;
 			}
@@ -418,10 +423,16 @@ static void check_conf(struct menu *menu)
 	if (sym && !sym_has_value(sym)) {
 		if (sym_is_changable(sym) ||
 		    (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) {
-			if (!conf_cnt++)
-				printf(_("*\n* Restart config...\n*\n"));
-			rootEntry = menu_get_parent_menu(menu);
-			conf(rootEntry);
+			if (input_mode == listnewconfig) {
+				if (sym->name && !sym_is_choice_value(sym)) {
+					printf("CONFIG_%s\n", sym->name);
+				}
+			} else {
+				if (!conf_cnt++)
+					printf(_("*\n* Restart config...\n*\n"));
+				rootEntry = menu_get_parent_menu(menu);
+				conf(rootEntry);
+			}
 		}
 	}
 
@@ -429,6 +440,22 @@ static void check_conf(struct menu *menu)
 		check_conf(child);
 }
 
+static struct option long_opts[] = {
+	{"oldaskconfig",    no_argument,       NULL, oldaskconfig},
+	{"oldconfig",       no_argument,       NULL, oldconfig},
+	{"silentoldconfig", no_argument,       NULL, silentoldconfig},
+	{"defconfig",       optional_argument, NULL, defconfig},
+	{"savedefconfig",   required_argument, NULL, savedefconfig},
+	{"allnoconfig",     no_argument,       NULL, allnoconfig},
+	{"allyesconfig",    no_argument,       NULL, allyesconfig},
+	{"allmodconfig",    no_argument,       NULL, allmodconfig},
+	{"alldefconfig",    no_argument,       NULL, alldefconfig},
+	{"randconfig",      no_argument,       NULL, randconfig},
+	{"listnewconfig",   no_argument,       NULL, listnewconfig},
+	{"oldnoconfig",     no_argument,       NULL, oldnoconfig},
+	{NULL, 0, NULL, 0}
+};
+
 int main(int ac, char **av)
 {
 	int opt;
@@ -439,32 +466,17 @@ int main(int ac, char **av)
 	bindtextdomain(PACKAGE, LOCALEDIR);
 	textdomain(PACKAGE);
 
-	while ((opt = getopt(ac, av, "osdD:nmyrh")) != -1) {
+	while ((opt = getopt_long_only(ac, av, "", long_opts, NULL)) != -1) {
+		input_mode = (enum input_mode)opt;
 		switch (opt) {
-		case 'o':
-			input_mode = ask_silent;
-			break;
-		case 's':
-			input_mode = ask_silent;
+		case silentoldconfig:
 			sync_kconfig = 1;
 			break;
-		case 'd':
-			input_mode = set_default;
-			break;
-		case 'D':
-			input_mode = set_default;
+		case defconfig:
+		case savedefconfig:
 			defconfig_file = optarg;
 			break;
-		case 'n':
-			input_mode = set_no;
-			break;
-		case 'm':
-			input_mode = set_mod;
-			break;
-		case 'y':
-			input_mode = set_yes;
-			break;
-		case 'r':
+		case randconfig:
 		{
 			struct timeval now;
 			unsigned int seed;
@@ -477,17 +489,12 @@ int main(int ac, char **av)
 
 			seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1));
 			srand(seed);
-
-			input_mode = set_random;
 			break;
 		}
-		case 'h':
-			printf(_("See README for usage info\n"));
-			exit(0);
-			break;
-		default:
+		case '?':
 			fprintf(stderr, _("See README for usage info\n"));
 			exit(1);
+			break;
 		}
 	}
 	if (ac == optind) {
@@ -512,7 +519,7 @@ int main(int ac, char **av)
 	}
 
 	switch (input_mode) {
-	case set_default:
+	case defconfig:
 		if (!defconfig_file)
 			defconfig_file = conf_get_default_confname();
 		if (conf_read(defconfig_file)) {
@@ -522,25 +529,32 @@ int main(int ac, char **av)
 			exit(1);
 		}
 		break;
-	case ask_silent:
-	case ask_all:
-	case ask_new:
+	case savedefconfig:
+		conf_read(NULL);
+		break;
+	case silentoldconfig:
+	case oldaskconfig:
+	case oldconfig:
+	case listnewconfig:
+	case oldnoconfig:
 		conf_read(NULL);
 		break;
-	case set_no:
-	case set_mod:
-	case set_yes:
-	case set_random:
+	case allnoconfig:
+	case allyesconfig:
+	case allmodconfig:
+	case alldefconfig:
+	case randconfig:
 		name = getenv("KCONFIG_ALLCONFIG");
 		if (name && !stat(name, &tmpstat)) {
 			conf_read_simple(name, S_DEF_USER);
 			break;
 		}
 		switch (input_mode) {
-		case set_no:	 name = "allno.config"; break;
-		case set_mod:	 name = "allmod.config"; break;
-		case set_yes:	 name = "allyes.config"; break;
-		case set_random: name = "allrandom.config"; break;
+		case allnoconfig:	name = "allno.config"; break;
+		case allyesconfig:	name = "allyes.config"; break;
+		case allmodconfig:	name = "allmod.config"; break;
+		case alldefconfig:	name = "alldef.config"; break;
+		case randconfig:	name = "allrandom.config"; break;
 		default: break;
 		}
 		if (!stat(name, &tmpstat))
@@ -565,33 +579,42 @@ int main(int ac, char **av)
 	}
 
 	switch (input_mode) {
-	case set_no:
+	case allnoconfig:
 		conf_set_all_new_symbols(def_no);
 		break;
-	case set_yes:
+	case allyesconfig:
 		conf_set_all_new_symbols(def_yes);
 		break;
-	case set_mod:
+	case allmodconfig:
 		conf_set_all_new_symbols(def_mod);
 		break;
-	case set_random:
+	case alldefconfig:
+		conf_set_all_new_symbols(def_default);
+		break;
+	case randconfig:
 		conf_set_all_new_symbols(def_random);
 		break;
-	case set_default:
+	case defconfig:
 		conf_set_all_new_symbols(def_default);
 		break;
-	case ask_new:
-	case ask_all:
+	case savedefconfig:
+		break;
+	case oldaskconfig:
 		rootEntry = &rootmenu;
 		conf(&rootmenu);
-		input_mode = ask_silent;
+		input_mode = silentoldconfig;
 		/* fall through */
-	case ask_silent:
+	case oldconfig:
+	case listnewconfig:
+	case oldnoconfig:
+	case silentoldconfig:
 		/* Update until a loop caused no more changes */
 		do {
 			conf_cnt = 0;
 			check_conf(&rootmenu);
-		} while (conf_cnt);
+		} while (conf_cnt &&
+			 (input_mode != listnewconfig &&
+			  input_mode != oldnoconfig));
 		break;
 	}
 
@@ -607,7 +630,13 @@ int main(int ac, char **av)
 			fprintf(stderr, _("\n*** Error during update of the kernel configuration.\n\n"));
 			return 1;
 		}
-	} else {
+	} else if (input_mode == savedefconfig) {
+		if (conf_write_defconfig(defconfig_file)) {
+			fprintf(stderr, _("n*** Error while saving defconfig to: %s\n\n"),
+			        defconfig_file);
+			return 1;
+		}
+	} else if (input_mode != listnewconfig) {
 		if (conf_write(NULL)) {
 			fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n"));
 			exit(1);
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index c4dec80cfd8..f81f263b64f 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -170,8 +170,11 @@ int conf_read_simple(const char *name, int def)
 		if (in)
 			goto load;
 		sym_add_change_count(1);
-		if (!sym_defconfig_list)
+		if (!sym_defconfig_list) {
+			if (modules_sym)
+				sym_calc_value(modules_sym);
 			return 1;
+		}
 
 		for_all_defaults(sym_defconfig_list, prop) {
 			if (expr_calc_value(prop->visible.expr) == no ||
@@ -396,15 +399,149 @@ int conf_read(const char *name)
 	return 0;
 }
 
+/* Write a S_STRING */
+static void conf_write_string(bool headerfile, const char *name,
+                              const char *str, FILE *out)
+{
+	int l;
+	if (headerfile)
+		fprintf(out, "#define CONFIG_%s \"", name);
+	else
+		fprintf(out, "CONFIG_%s=\"", name);
+
+	while (1) {
+		l = strcspn(str, "\"\\");
+		if (l) {
+			fwrite(str, l, 1, out);
+			str += l;
+		}
+		if (!*str)
+			break;
+		fprintf(out, "\\%c", *str++);
+	}
+	fputs("\"\n", out);
+}
+
+static void conf_write_symbol(struct symbol *sym, enum symbol_type type,
+                              FILE *out, bool write_no)
+{
+	const char *str;
+
+	switch (type) {
+	case S_BOOLEAN:
+	case S_TRISTATE:
+		switch (sym_get_tristate_value(sym)) {
+		case no:
+			if (write_no)
+				fprintf(out, "# CONFIG_%s is not set\n", sym->name);
+			break;
+		case mod:
+			fprintf(out, "CONFIG_%s=m\n", sym->name);
+			break;
+		case yes:
+			fprintf(out, "CONFIG_%s=y\n", sym->name);
+			break;
+		}
+		break;
+	case S_STRING:
+		conf_write_string(false, sym->name, sym_get_string_value(sym), out);
+		break;
+	case S_HEX:
+	case S_INT:
+		str = sym_get_string_value(sym);
+		fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
+		break;
+	case S_OTHER:
+	case S_UNKNOWN:
+		break;
+	}
+}
+
+/*
+ * Write out a minimal config.
+ * All values that has default values are skipped as this is redundant.
+ */
+int conf_write_defconfig(const char *filename)
+{
+	struct symbol *sym;
+	struct menu *menu;
+	FILE *out;
+
+	out = fopen(filename, "w");
+	if (!out)
+		return 1;
+
+	sym_clear_all_valid();
+
+	/* Traverse all menus to find all relevant symbols */
+	menu = rootmenu.list;
+
+	while (menu != NULL)
+	{
+		sym = menu->sym;
+		if (sym == NULL) {
+			if (!menu_is_visible(menu))
+				goto next_menu;
+		} else if (!sym_is_choice(sym)) {
+			sym_calc_value(sym);
+			if (!(sym->flags & SYMBOL_WRITE))
+				goto next_menu;
+			sym->flags &= ~SYMBOL_WRITE;
+			/* If we cannot change the symbol - skip */
+			if (!sym_is_changable(sym))
+				goto next_menu;
+			/* If symbol equals to default value - skip */
+			if (strcmp(sym_get_string_value(sym), sym_get_string_default(sym)) == 0)
+				goto next_menu;
+
+			/*
+			 * If symbol is a choice value and equals to the
+			 * default for a choice - skip.
+			 * But only if value equal to "y".
+			 */
+			if (sym_is_choice_value(sym)) {
+				struct symbol *cs;
+				struct symbol *ds;
+
+				cs = prop_get_symbol(sym_get_choice_prop(sym));
+				ds = sym_choice_default(cs);
+				if (sym == ds) {
+					if ((sym->type == S_BOOLEAN ||
+					sym->type == S_TRISTATE) &&
+					sym_get_tristate_value(sym) == yes)
+						goto next_menu;
+				}
+			}
+			conf_write_symbol(sym, sym->type, out, true);
+		}
+next_menu:
+		if (menu->list != NULL) {
+			menu = menu->list;
+		}
+		else if (menu->next != NULL) {
+			menu = menu->next;
+		} else {
+			while ((menu = menu->parent)) {
+				if (menu->next != NULL) {
+					menu = menu->next;
+					break;
+				}
+			}
+		}
+	}
+	fclose(out);
+	return 0;
+}
+
 int conf_write(const char *name)
 {
 	FILE *out;
 	struct symbol *sym;
 	struct menu *menu;
 	const char *basename;
-	char dirname[128], tmpname[128], newname[128];
-	int type, l;
 	const char *str;
+	char dirname[128], tmpname[128], newname[128];
+	enum symbol_type type;
 	time_t now;
 	int use_timestamp = 1;
 	char *env;
@@ -484,50 +621,11 @@ int conf_write(const char *name)
 				if (modules_sym->curr.tri == no)
 					type = S_BOOLEAN;
 			}
-			switch (type) {
-			case S_BOOLEAN:
-			case S_TRISTATE:
-				switch (sym_get_tristate_value(sym)) {
-				case no:
-					fprintf(out, "# CONFIG_%s is not set\n", sym->name);
-					break;
-				case mod:
-					fprintf(out, "CONFIG_%s=m\n", sym->name);
-					break;
-				case yes:
-					fprintf(out, "CONFIG_%s=y\n", sym->name);
-					break;
-				}
-				break;
-			case S_STRING:
-				str = sym_get_string_value(sym);
-				fprintf(out, "CONFIG_%s=\"", sym->name);
-				while (1) {
-					l = strcspn(str, "\"\\");
-					if (l) {
-						fwrite(str, l, 1, out);
-						str += l;
-					}
-					if (!*str)
-						break;
-					fprintf(out, "\\%c", *str++);
-				}
-				fputs("\"\n", out);
-				break;
-			case S_HEX:
-				str = sym_get_string_value(sym);
-				if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) {
-					fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
-					break;
-				}
-			case S_INT:
-				str = sym_get_string_value(sym);
-				fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
-				break;
-			}
+			/* Write config symbol to file */
+			conf_write_symbol(sym, type, out, true);
 		}
 
-	next:
+next:
 		if (menu->list) {
 			menu = menu->list;
 			continue;
@@ -679,7 +777,7 @@ int conf_write_autoconf(void)
 	const char *name;
 	FILE *out, *tristate, *out_h;
 	time_t now;
-	int i, l;
+	int i;
 
 	sym_clear_all_valid();
 
@@ -729,6 +827,11 @@ int conf_write_autoconf(void)
 		sym_calc_value(sym);
 		if (!(sym->flags & SYMBOL_WRITE) || !sym->name)
 			continue;
+
+		/* write symbol to config file */
+		conf_write_symbol(sym, sym->type, out, false);
+
+		/* update autoconf and tristate files */
 		switch (sym->type) {
 		case S_BOOLEAN:
 		case S_TRISTATE:
@@ -736,12 +839,10 @@ int conf_write_autoconf(void)
 			case no:
 				break;
 			case mod:
-				fprintf(out, "CONFIG_%s=m\n", sym->name);
 				fprintf(tristate, "CONFIG_%s=M\n", sym->name);
 				fprintf(out_h, "#define CONFIG_%s_MODULE 1\n", sym->name);
 				break;
 			case yes:
-				fprintf(out, "CONFIG_%s=y\n", sym->name);
 				if (sym->type == S_TRISTATE)
 					fprintf(tristate, "CONFIG_%s=Y\n",
 							sym->name);
@@ -750,35 +851,16 @@ int conf_write_autoconf(void)
 			}
 			break;
 		case S_STRING:
-			str = sym_get_string_value(sym);
-			fprintf(out, "CONFIG_%s=\"", sym->name);
-			fprintf(out_h, "#define CONFIG_%s \"", sym->name);
-			while (1) {
-				l = strcspn(str, "\"\\");
-				if (l) {
-					fwrite(str, l, 1, out);
-					fwrite(str, l, 1, out_h);
-					str += l;
-				}
-				if (!*str)
-					break;
-				fprintf(out, "\\%c", *str);
-				fprintf(out_h, "\\%c", *str);
-				str++;
-			}
-			fputs("\"\n", out);
-			fputs("\"\n", out_h);
+			conf_write_string(true, sym->name, sym_get_string_value(sym), out_h);
 			break;
 		case S_HEX:
 			str = sym_get_string_value(sym);
 			if (str[0] != '0' || (str[1] != 'x' && str[1] != 'X')) {
-				fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
 				fprintf(out_h, "#define CONFIG_%s 0x%s\n", sym->name, str);
 				break;
 			}
 		case S_INT:
 			str = sym_get_string_value(sym);
-			fprintf(out, "CONFIG_%s=%s\n", sym->name, str);
 			fprintf(out_h, "#define CONFIG_%s %s\n", sym->name, str);
 			break;
 		default:
@@ -862,7 +944,8 @@ void conf_set_all_new_symbols(enum conf_def_mode mode)
 				sym->def[S_DEF_USER].tri = no;
 				break;
 			case def_random:
-				sym->def[S_DEF_USER].tri = (tristate)(rand() % 3);
+				cnt = sym_get_type(sym) == S_TRISTATE ? 3 : 2;
+				sym->def[S_DEF_USER].tri = (tristate)(rand() % cnt);
 				break;
 			default:
 				continue;
diff --git a/scripts/kconfig/expr.c b/scripts/kconfig/expr.c
index d83f2322893..8f18e37892c 100644
--- a/scripts/kconfig/expr.c
+++ b/scripts/kconfig/expr.c
@@ -1121,7 +1121,7 @@ static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *s
 	}
 
 	str_append(gs, str);
-	if (sym)
+	if (sym && sym->type != S_UNKNOWN)
 		str_printf(gs, " [=%s]", sym_str);
 }
 
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 891cd9ce9ba..6ee2e4fb148 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -83,6 +83,7 @@ struct symbol {
 	tristate visible;
 	int flags;
 	struct property *prop;
+	struct expr_value dir_dep;
 	struct expr_value rev_dep;
 };
 
@@ -131,6 +132,7 @@ enum prop_type {
 	P_SELECT,   /* select BAR */
 	P_RANGE,    /* range 7..100 (for a symbol) */
 	P_ENV,      /* value from environment variable */
+	P_SYMBOL,   /* where a symbol is defined */
 };
 
 struct property {
@@ -163,6 +165,7 @@ struct menu {
 	struct symbol *sym;
 	struct property *prompt;
 	struct expr *dep;
+	struct expr *dir_dep;
 	unsigned int flags;
 	char *help;
 	struct file *file;
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index bef10411837..d66988265f8 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -1114,7 +1114,7 @@ static gchar **fill_row(struct menu *menu)
 
 	row[COL_OPTION] =
 	    g_strdup_printf("%s %s", _(menu_get_prompt(menu)),
-			    sym && sym_has_value(sym) ? "(NEW)" : "");
+			    sym && !sym_has_value(sym) ? "(NEW)" : "");
 
 	if (opt_mode == OPT_ALL && !menu_is_visible(menu))
 		row[COL_COLOR] = g_strdup("DarkGray");
@@ -1343,7 +1343,8 @@ static void update_tree(struct menu *src, GtkTreeIter * dst)
 #endif
 
 		if ((opt_mode == OPT_NORMAL && !menu_is_visible(child1)) ||
-		    (opt_mode == OPT_PROMPT && !menu_has_prompt(child1))) {
+		    (opt_mode == OPT_PROMPT && !menu_has_prompt(child1)) ||
+		    (opt_mode == OPT_ALL    && !menu_get_prompt(child1))) {
 
 			/* remove node */
 			if (gtktree_iter_find_node(dst, menu1) != NULL) {
@@ -1425,7 +1426,7 @@ static void display_tree(struct menu *menu)
 
 		if ((opt_mode == OPT_NORMAL && menu_is_visible(child)) ||
 		    (opt_mode == OPT_PROMPT && menu_has_prompt(child)) ||
-		    (opt_mode == OPT_ALL))
+		    (opt_mode == OPT_ALL    && menu_get_prompt(child)))
 			place_node(child, fill_row(child));
 #ifdef DEBUG
 		printf("%*c%s: ", indent, ' ', menu_get_prompt(child));
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index ce6549cdacc..76db065ed72 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -126,6 +126,8 @@ void sym_init(void);
 void sym_clear_all_valid(void);
 void sym_set_all_changed(void);
 void sym_set_changed(struct symbol *sym);
+struct symbol *sym_choice_default(struct symbol *sym);
+const char *sym_get_string_default(struct symbol *sym);
 struct symbol *sym_check_deps(struct symbol *sym);
 struct property *prop_alloc(enum prop_type type, struct symbol *sym);
 struct symbol *prop_get_symbol(struct property *prop);
diff --git a/scripts/kconfig/lkc_proto.h b/scripts/kconfig/lkc_proto.h
index 7cadcad8233..9a948c9ce44 100644
--- a/scripts/kconfig/lkc_proto.h
+++ b/scripts/kconfig/lkc_proto.h
@@ -3,6 +3,7 @@
 P(conf_parse,void,(const char *name));
 P(conf_read,int,(const char *name));
 P(conf_read_simple,int,(const char *name, int));
+P(conf_write_defconfig,int,(const char *name));
 P(conf_write,int,(const char *name));
 P(conf_write_autoconf,int,(void));
 P(conf_get_changed,bool,(void));
diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c
index bcc6f19c3a3..a2eb80fbc89 100644
--- a/scripts/kconfig/lxdialog/checklist.c
+++ b/scripts/kconfig/lxdialog/checklist.c
@@ -31,6 +31,10 @@ static int list_width, check_x, item_x;
 static void print_item(WINDOW * win, int choice, int selected)
 {
 	int i;
+	char *list_item = malloc(list_width + 1);
+
+	strncpy(list_item, item_str(), list_width - item_x);
+	list_item[list_width - item_x] = '\0';
 
 	/* Clear 'residue' of last item */
 	wattrset(win, dlg.menubox.atr);
@@ -45,13 +49,14 @@ static void print_item(WINDOW * win, int choice, int selected)
 		wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' ');
 
 	wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr);
-	mvwaddch(win, choice, item_x, item_str()[0]);
+	mvwaddch(win, choice, item_x, list_item[0]);
 	wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr);
-	waddstr(win, (char *)item_str() + 1);
+	waddstr(win, list_item + 1);
 	if (selected) {
 		wmove(win, choice, check_x + 1);
 		wrefresh(win);
 	}
+	free(list_item);
 }
 
 /*
@@ -175,6 +180,7 @@ do_resize:
 	check_x = 0;
 	item_foreach()
 		check_x = MAX(check_x, strlen(item_str()) + 4);
+	check_x = MIN(check_x, list_width);
 
 	check_x = (list_width - check_x) / 2;
 	item_x = check_x + 4;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 2c83d3234d3..d2f6e056c05 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -74,7 +74,7 @@ static const char mconf_readme[] = N_(
 "\n"
 "   Shortcut: Press <H> or <?>.\n"
 "\n"
-"o  To show hidden options, press <Z>.\n"
+"o  To toggle the display of hidden options, press <Z>.\n"
 "\n"
 "\n"
 "Radiolists  (Choice lists)\n"
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 203632cc30b..4fb590247f3 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -58,6 +58,8 @@ void menu_add_entry(struct symbol *sym)
 	*last_entry_ptr = menu;
 	last_entry_ptr = &menu->next;
 	current_entry = menu;
+	if (sym)
+		menu_add_symbol(P_SYMBOL, sym, NULL);
 }
 
 void menu_end_entry(void)
@@ -105,6 +107,7 @@ static struct expr *menu_check_dep(struct expr *e)
 void menu_add_dep(struct expr *dep)
 {
 	current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep));
+	current_entry->dir_dep = current_entry->dep;
 }
 
 void menu_set_type(int type)
@@ -288,6 +291,10 @@ void menu_finalize(struct menu *parent)
 		for (menu = parent->list; menu; menu = menu->next)
 			menu_finalize(menu);
 	} else if (sym) {
+		/* ignore inherited dependencies for dir_dep */
+		sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep));
+		sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr);
+
 		basedep = parent->prompt ? parent->prompt->visible.expr : NULL;
 		basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
 		basedep = expr_eliminate_dups(expr_transform(basedep));
@@ -419,9 +426,13 @@ bool menu_is_visible(struct menu *menu)
 	if (!sym || sym_get_tristate_value(menu->sym) == no)
 		return false;
 
-	for (child = menu->list; child; child = child->next)
-		if (menu_is_visible(child))
+	for (child = menu->list; child; child = child->next) {
+		if (menu_is_visible(child)) {
+			if (sym)
+				sym->flags |= SYMBOL_DEF_USER;
 			return true;
+		}
+	}
 
 	return false;
 }
@@ -501,9 +512,19 @@ void get_symbol_str(struct gstr *r, struct symbol *sym)
 	bool hit;
 	struct property *prop;
 
-	if (sym && sym->name)
+	if (sym && sym->name) {
 		str_printf(r, "Symbol: %s [=%s]\n", sym->name,
 			   sym_get_string_value(sym));
+		str_printf(r, "Type  : %s\n", sym_type_name(sym->type));
+		if (sym->type == S_INT || sym->type == S_HEX) {
+			prop = sym_get_range_prop(sym);
+			if (prop) {
+				str_printf(r, "Range : ");
+				expr_gstr_print(prop->expr, r);
+				str_append(r, "\n");
+			}
+		}
+	}
 	for_all_prompts(sym, prop)
 		get_prompt_str(r, prop);
 	hit = false;
diff --git a/scripts/kconfig/qconf.cc b/scripts/kconfig/qconf.cc
index 00c51507cfc..820df2d1217 100644
--- a/scripts/kconfig/qconf.cc
+++ b/scripts/kconfig/qconf.cc
@@ -58,11 +58,10 @@ QValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok)
 {
 	QValueList<int> result;
 	QStringList entryList = readListEntry(key, ok);
-	if (ok) {
-		QStringList::Iterator it;
-		for (it = entryList.begin(); it != entryList.end(); ++it)
-			result.push_back((*it).toInt());
-	}
+	QStringList::Iterator it;
+
+	for (it = entryList.begin(); it != entryList.end(); ++it)
+		result.push_back((*it).toInt());
 
 	return result;
 }
@@ -149,7 +148,7 @@ void ConfigItem::updateMenu(void)
 	case S_TRISTATE:
 		char ch;
 
-		if (!sym_is_changable(sym) && !list->showAll) {
+		if (!sym_is_changable(sym) && list->optMode == normalOpt) {
 			setPixmap(promptColIdx, 0);
 			setText(noColIdx, QString::null);
 			setText(modColIdx, QString::null);
@@ -320,7 +319,7 @@ ConfigList::ConfigList(ConfigView* p, const char *name)
 	  symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no),
 	  choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no),
 	  menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void),
-	  showAll(false), showName(false), showRange(false), showData(false),
+	  showName(false), showRange(false), showData(false), optMode(normalOpt),
 	  rootEntry(0), headerPopup(0)
 {
 	int i;
@@ -337,10 +336,10 @@ ConfigList::ConfigList(ConfigView* p, const char *name)
 
 	if (name) {
 		configSettings->beginGroup(name);
-		showAll = configSettings->readBoolEntry("/showAll", false);
 		showName = configSettings->readBoolEntry("/showName", false);
 		showRange = configSettings->readBoolEntry("/showRange", false);
 		showData = configSettings->readBoolEntry("/showData", false);
+		optMode = (enum optionMode)configSettings->readNumEntry("/optionMode", false);
 		configSettings->endGroup();
 		connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings()));
 	}
@@ -352,6 +351,17 @@ ConfigList::ConfigList(ConfigView* p, const char *name)
 	reinit();
 }
 
+bool ConfigList::menuSkip(struct menu *menu)
+{
+	if (optMode == normalOpt && menu_is_visible(menu))
+		return false;
+	if (optMode == promptOpt && menu_has_prompt(menu))
+		return false;
+	if (optMode == allOpt)
+		return false;
+	return true;
+}
+
 void ConfigList::reinit(void)
 {
 	removeColumn(dataColIdx);
@@ -380,7 +390,7 @@ void ConfigList::saveSettings(void)
 		configSettings->writeEntry("/showName", showName);
 		configSettings->writeEntry("/showRange", showRange);
 		configSettings->writeEntry("/showData", showData);
-		configSettings->writeEntry("/showAll", showAll);
+		configSettings->writeEntry("/optionMode", (int)optMode);
 		configSettings->endGroup();
 	}
 }
@@ -606,7 +616,7 @@ void ConfigList::updateMenuList(P* parent, struct menu* menu)
 		}
 
 		visible = menu_is_visible(child);
-		if (showAll || visible) {
+		if (!menuSkip(child)) {
 			if (!child->sym && !child->list && !child->prompt)
 				continue;
 			if (!item || item->menu != child)
@@ -835,7 +845,10 @@ void ConfigList::contextMenuEvent(QContextMenuEvent *e)
 		e->ignore();
 }
 
-ConfigView* ConfigView::viewList;
+ConfigView*ConfigView::viewList;
+QAction *ConfigView::showNormalAction;
+QAction *ConfigView::showAllAction;
+QAction *ConfigView::showPromptAction;
 
 ConfigView::ConfigView(QWidget* parent, const char *name)
 	: Parent(parent, name)
@@ -860,13 +873,16 @@ ConfigView::~ConfigView(void)
 	}
 }
 
-void ConfigView::setShowAll(bool b)
+void ConfigView::setOptionMode(QAction *act)
 {
-	if (list->showAll != b) {
-		list->showAll = b;
-		list->updateListAll();
-		emit showAllChanged(b);
-	}
+	if (act == showNormalAction)
+		list->optMode = normalOpt;
+	else if (act == showAllAction)
+		list->optMode = allOpt;
+	else
+		list->optMode = promptOpt;
+
+	list->updateListAll();
 }
 
 void ConfigView::setShowName(bool b)
@@ -964,34 +980,6 @@ void ConfigInfoView::setInfo(struct menu *m)
 		menuInfo();
 }
 
-void ConfigInfoView::setSource(const QString& name)
-{
-	const char *p = name.latin1();
-
-	menu = NULL;
-	sym = NULL;
-
-	switch (p[0]) {
-	case 'm':
-		struct menu *m;
-
-		if (sscanf(p, "m%p", &m) == 1 && menu != m) {
-			menu = m;
-			menuInfo();
-			emit menuSelected(menu);
-		}
-		break;
-	case 's':
-		struct symbol *s;
-
-		if (sscanf(p, "s%p", &s) == 1 && sym != s) {
-			sym = s;
-			symbolInfo();
-		}
-		break;
-	}
-}
-
 void ConfigInfoView::symbolInfo(void)
 {
 	QString str;
@@ -1349,11 +1337,24 @@ ConfigMainWindow::ConfigMainWindow(void)
 	  connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool)));
 	  connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool)));
 	  showDataAction->setOn(configList->showData);
-	QAction *showAllAction = new QAction(NULL, _("Show All Options"), 0, this);
-	  showAllAction->setToggleAction(TRUE);
-	  connect(showAllAction, SIGNAL(toggled(bool)), configView, SLOT(setShowAll(bool)));
-	  connect(showAllAction, SIGNAL(toggled(bool)), menuView, SLOT(setShowAll(bool)));
-	  showAllAction->setOn(configList->showAll);
+
+	QActionGroup *optGroup = new QActionGroup(this);
+	optGroup->setExclusive(TRUE);
+	connect(optGroup, SIGNAL(selected(QAction *)), configView,
+		SLOT(setOptionMode(QAction *)));
+	connect(optGroup, SIGNAL(selected(QAction *)), menuView,
+		SLOT(setOptionMode(QAction *)));
+
+	configView->showNormalAction = new QAction(NULL, _("Show Normal Options"), 0, optGroup);
+	configView->showAllAction = new QAction(NULL, _("Show All Options"), 0, optGroup);
+	configView->showPromptAction = new QAction(NULL, _("Show Prompt Options"), 0, optGroup);
+	configView->showNormalAction->setToggleAction(TRUE);
+	configView->showNormalAction->setOn(configList->optMode == normalOpt);
+	configView->showAllAction->setToggleAction(TRUE);
+	configView->showAllAction->setOn(configList->optMode == allOpt);
+	configView->showPromptAction->setToggleAction(TRUE);
+	configView->showPromptAction->setOn(configList->optMode == promptOpt);
+
 	QAction *showDebugAction = new QAction(NULL, _("Show Debug Info"), 0, this);
 	  showDebugAction->setToggleAction(TRUE);
 	  connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool)));
@@ -1396,7 +1397,8 @@ ConfigMainWindow::ConfigMainWindow(void)
 	showRangeAction->addTo(optionMenu);
 	showDataAction->addTo(optionMenu);
 	optionMenu->insertSeparator();
-	showAllAction->addTo(optionMenu);
+	optGroup->addTo(optionMenu);
+	optionMenu->insertSeparator();
 	showDebugAction->addTo(optionMenu);
 
 	// create help menu
@@ -1491,7 +1493,7 @@ void ConfigMainWindow::setMenuLink(struct menu *menu)
 	ConfigList* list = NULL;
 	ConfigItem* item;
 
-	if (!menu_is_visible(menu) && !configView->showAll())
+	if (configList->menuSkip(menu))
 		return;
 
 	switch (configList->mode) {
diff --git a/scripts/kconfig/qconf.h b/scripts/kconfig/qconf.h
index b3b5657b6b3..636a74b23bf 100644
--- a/scripts/kconfig/qconf.h
+++ b/scripts/kconfig/qconf.h
@@ -44,6 +44,9 @@ enum colIdx {
 enum listMode {
 	singleMode, menuMode, symbolMode, fullMode, listMode
 };
+enum optionMode {
+	normalOpt = 0, allOpt, promptOpt
+};
 
 class ConfigList : public QListView {
 	Q_OBJECT
@@ -115,6 +118,8 @@ public:
 	void setAllOpen(bool open);
 	void setParentMenu(void);
 
+	bool menuSkip(struct menu *);
+
 	template <class P>
 	void updateMenuList(P*, struct menu*);
 
@@ -124,8 +129,9 @@ public:
 	QPixmap choiceYesPix, choiceNoPix;
 	QPixmap menuPix, menuInvPix, menuBackPix, voidPix;
 
-	bool showAll, showName, showRange, showData;
+	bool showName, showRange, showData;
 	enum listMode mode;
+	enum optionMode optMode;
 	struct menu *rootEntry;
 	QColorGroup disabledColorGroup;
 	QColorGroup inactivedColorGroup;
@@ -222,17 +228,15 @@ public:
 	static void updateList(ConfigItem* item);
 	static void updateListAll(void);
 
-	bool showAll(void) const { return list->showAll; }
 	bool showName(void) const { return list->showName; }
 	bool showRange(void) const { return list->showRange; }
 	bool showData(void) const { return list->showData; }
 public slots:
-	void setShowAll(bool);
 	void setShowName(bool);
 	void setShowRange(bool);
 	void setShowData(bool);
+	void setOptionMode(QAction *);
 signals:
-	void showAllChanged(bool);
 	void showNameChanged(bool);
 	void showRangeChanged(bool);
 	void showDataChanged(bool);
@@ -242,6 +246,10 @@ public:
 
 	static ConfigView* viewList;
 	ConfigView* nextView;
+
+	static QAction *showNormalAction;
+	static QAction *showAllAction;
+	static QAction *showPromptAction;
 };
 
 class ConfigInfoView : public QTextBrowser {
@@ -254,7 +262,6 @@ public:
 public slots:
 	void setInfo(struct menu *menu);
 	void saveSettings(void);
-	void setSource(const QString& name);
 	void setShowDebug(bool);
 
 signals:
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 2e7a048e0cf..e95718fea35 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -205,6 +205,16 @@ static void sym_calc_visibility(struct symbol *sym)
 	}
 	if (sym_is_choice_value(sym))
 		return;
+	/* defaulting to "yes" if no explicit "depends on" are given */
+	tri = yes;
+	if (sym->dir_dep.expr)
+		tri = expr_calc_value(sym->dir_dep.expr);
+	if (tri == mod)
+		tri = yes;
+	if (sym->dir_dep.tri != tri) {
+		sym->dir_dep.tri = tri;
+		sym_set_changed(sym);
+	}
 	tri = no;
 	if (sym->rev_dep.expr)
 		tri = expr_calc_value(sym->rev_dep.expr);
@@ -216,44 +226,63 @@ static void sym_calc_visibility(struct symbol *sym)
 	}
 }
 
-static struct symbol *sym_calc_choice(struct symbol *sym)
+/*
+ * Find the default symbol for a choice.
+ * First try the default values for the choice symbol
+ * Next locate the first visible choice value
+ * Return NULL if none was found
+ */
+struct symbol *sym_choice_default(struct symbol *sym)
 {
 	struct symbol *def_sym;
 	struct property *prop;
 	struct expr *e;
 
-	/* is the user choice visible? */
-	def_sym = sym->def[S_DEF_USER].val;
-	if (def_sym) {
-		sym_calc_visibility(def_sym);
-		if (def_sym->visible != no)
-			return def_sym;
-	}
-
 	/* any of the defaults visible? */
 	for_all_defaults(sym, prop) {
 		prop->visible.tri = expr_calc_value(prop->visible.expr);
 		if (prop->visible.tri == no)
 			continue;
 		def_sym = prop_get_symbol(prop);
-		sym_calc_visibility(def_sym);
 		if (def_sym->visible != no)
 			return def_sym;
 	}
 
 	/* just get the first visible value */
 	prop = sym_get_choice_prop(sym);
-	expr_list_for_each_sym(prop->expr, e, def_sym) {
-		sym_calc_visibility(def_sym);
+	expr_list_for_each_sym(prop->expr, e, def_sym)
 		if (def_sym->visible != no)
 			return def_sym;
-	}
 
-	/* no choice? reset tristate value */
-	sym->curr.tri = no;
+	/* failed to locate any defaults */
 	return NULL;
 }
 
+static struct symbol *sym_calc_choice(struct symbol *sym)
+{
+	struct symbol *def_sym;
+	struct property *prop;
+	struct expr *e;
+
+	/* first calculate all choice values' visibilities */
+	prop = sym_get_choice_prop(sym);
+	expr_list_for_each_sym(prop->expr, e, def_sym)
+		sym_calc_visibility(def_sym);
+
+	/* is the user choice visible? */
+	def_sym = sym->def[S_DEF_USER].val;
+	if (def_sym && def_sym->visible != no)
+		return def_sym;
+
+	def_sym = sym_choice_default(sym);
+
+	if (def_sym == NULL)
+		/* no choice? reset tristate value */
+		sym->curr.tri = no;
+
+	return def_sym;
+}
+
 void sym_calc_value(struct symbol *sym)
 {
 	struct symbol_value newval, oldval;
@@ -321,6 +350,14 @@ void sym_calc_value(struct symbol *sym)
 				}
 			}
 		calc_newval:
+			if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) {
+				fprintf(stderr, "warning: (");
+				expr_fprint(sym->rev_dep.expr, stderr);
+				fprintf(stderr, ") selects %s which has unmet direct dependencies (",
+					sym->name);
+				expr_fprint(sym->dir_dep.expr, stderr);
+				fprintf(stderr, ")\n");
+			}
 			newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri);
 		}
 		if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN)
@@ -365,12 +402,13 @@ void sym_calc_value(struct symbol *sym)
 
 	if (sym_is_choice(sym)) {
 		struct symbol *choice_sym;
-		int flags = sym->flags & (SYMBOL_CHANGED | SYMBOL_WRITE);
 
 		prop = sym_get_choice_prop(sym);
 		expr_list_for_each_sym(prop->expr, e, choice_sym) {
-			choice_sym->flags |= flags;
-			if (flags & SYMBOL_CHANGED)
+			if ((sym->flags & SYMBOL_WRITE) &&
+			    choice_sym->visible != no)
+				choice_sym->flags |= SYMBOL_WRITE;
+			if (sym->flags & SYMBOL_CHANGED)
 				sym_set_changed(choice_sym);
 		}
 	}
@@ -623,6 +661,80 @@ bool sym_set_string_value(struct symbol *sym, const char *newval)
 	return true;
 }
 
+/*
+ * Find the default value associated to a symbol.
+ * For tristate symbol handle the modules=n case
+ * in which case "m" becomes "y".
+ * If the symbol does not have any default then fallback
+ * to the fixed default values.
+ */
+const char *sym_get_string_default(struct symbol *sym)
+{
+	struct property *prop;
+	struct symbol *ds;
+	const char *str;
+	tristate val;
+
+	sym_calc_visibility(sym);
+	sym_calc_value(modules_sym);
+	val = symbol_no.curr.tri;
+	str = symbol_empty.curr.val;
+
+	/* If symbol has a default value look it up */
+	prop = sym_get_default_prop(sym);
+	if (prop != NULL) {
+		switch (sym->type) {
+		case S_BOOLEAN:
+		case S_TRISTATE:
+			/* The visibility imay limit the value from yes => mod */
+			val = EXPR_AND(expr_calc_value(prop->expr), prop->visible.tri);
+			break;
+		default:
+			/*
+			 * The following fails to handle the situation
+			 * where a default value is further limited by
+			 * the valid range.
+			 */
+			ds = prop_get_symbol(prop);
+			if (ds != NULL) {
+				sym_calc_value(ds);
+				str = (const char *)ds->curr.val;
+			}
+		}
+	}
+
+	/* Handle select statements */
+	val = EXPR_OR(val, sym->rev_dep.tri);
+
+	/* transpose mod to yes if modules are not enabled */
+	if (val == mod)
+		if (!sym_is_choice_value(sym) && modules_sym->curr.tri == no)
+			val = yes;
+
+	/* transpose mod to yes if type is bool */
+	if (sym->type == S_BOOLEAN && val == mod)
+		val = yes;
+
+	switch (sym->type) {
+	case S_BOOLEAN:
+	case S_TRISTATE:
+		switch (val) {
+		case no: return "n";
+		case mod: return "m";
+		case yes: return "y";
+		}
+	case S_INT:
+	case S_HEX:
+		return str;
+	case S_STRING:
+		return str;
+	case S_OTHER:
+	case S_UNKNOWN:
+		break;
+	}
+	return "";
+}
+
 const char *sym_get_string_value(struct symbol *sym)
 {
 	tristate val;
@@ -765,6 +877,110 @@ struct symbol **sym_re_search(const char *pattern)
 	return sym_arr;
 }
 
+/*
+ * When we check for recursive dependencies we use a stack to save
+ * current state so we can print out relevant info to user.
+ * The entries are located on the call stack so no need to free memory.
+ * Note inser() remove() must always match to properly clear the stack.
+ */
+static struct dep_stack {
+	struct dep_stack *prev, *next;
+	struct symbol *sym;
+	struct property *prop;
+	struct expr *expr;
+} *check_top;
+
+static void dep_stack_insert(struct dep_stack *stack, struct symbol *sym)
+{
+	memset(stack, 0, sizeof(*stack));
+	if (check_top)
+		check_top->next = stack;
+	stack->prev = check_top;
+	stack->sym = sym;
+	check_top = stack;
+}
+
+static void dep_stack_remove(void)
+{
+	check_top = check_top->prev;
+	if (check_top)
+		check_top->next = NULL;
+}
+
+/*
+ * Called when we have detected a recursive dependency.
+ * check_top point to the top of the stact so we use
+ * the ->prev pointer to locate the bottom of the stack.
+ */
+static void sym_check_print_recursive(struct symbol *last_sym)
+{
+	struct dep_stack *stack;
+	struct symbol *sym, *next_sym;
+	struct menu *menu = NULL;
+	struct property *prop;
+	struct dep_stack cv_stack;
+
+	if (sym_is_choice_value(last_sym)) {
+		dep_stack_insert(&cv_stack, last_sym);
+		last_sym = prop_get_symbol(sym_get_choice_prop(last_sym));
+	}
+
+	for (stack = check_top; stack != NULL; stack = stack->prev)
+		if (stack->sym == last_sym)
+			break;
+	if (!stack) {
+		fprintf(stderr, "unexpected recursive dependency error\n");
+		return;
+	}
+
+	for (; stack; stack = stack->next) {
+		sym = stack->sym;
+		next_sym = stack->next ? stack->next->sym : last_sym;
+		prop = stack->prop;
+
+		/* for choice values find the menu entry (used below) */
+		if (sym_is_choice(sym) || sym_is_choice_value(sym)) {
+			for (prop = sym->prop; prop; prop = prop->next) {
+				menu = prop->menu;
+				if (prop->menu)
+					break;
+			}
+		}
+		if (stack->sym == last_sym)
+			fprintf(stderr, "%s:%d:error: recursive dependency detected!\n",
+				prop->file->name, prop->lineno);
+		if (stack->expr) {
+			fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n",
+				prop->file->name, prop->lineno,
+				sym->name ? sym->name : "<choice>",
+				prop_get_type_name(prop->type),
+				next_sym->name ? next_sym->name : "<choice>");
+		} else if (stack->prop) {
+			fprintf(stderr, "%s:%d:\tsymbol %s depends on %s\n",
+				prop->file->name, prop->lineno,
+				sym->name ? sym->name : "<choice>",
+				next_sym->name ? next_sym->name : "<choice>");
+		} else if (sym_is_choice(sym)) {
+			fprintf(stderr, "%s:%d:\tchoice %s contains symbol %s\n",
+				menu->file->name, menu->lineno,
+				sym->name ? sym->name : "<choice>",
+				next_sym->name ? next_sym->name : "<choice>");
+		} else if (sym_is_choice_value(sym)) {
+			fprintf(stderr, "%s:%d:\tsymbol %s is part of choice %s\n",
+				menu->file->name, menu->lineno,
+				sym->name ? sym->name : "<choice>",
+				next_sym->name ? next_sym->name : "<choice>");
+		} else {
+			fprintf(stderr, "%s:%d:\tsymbol %s is selected by %s\n",
+				prop->file->name, prop->lineno,
+				sym->name ? sym->name : "<choice>",
+				next_sym->name ? next_sym->name : "<choice>");
+		}
+	}
+
+	if (check_top == &cv_stack)
+		dep_stack_remove();
+}
 
 static struct symbol *sym_check_expr_deps(struct expr *e)
 {
@@ -801,24 +1017,33 @@ static struct symbol *sym_check_sym_deps(struct symbol *sym)
 {
 	struct symbol *sym2;
 	struct property *prop;
+	struct dep_stack stack;
+
+	dep_stack_insert(&stack, sym);
 
 	sym2 = sym_check_expr_deps(sym->rev_dep.expr);
 	if (sym2)
-		return sym2;
+		goto out;
 
 	for (prop = sym->prop; prop; prop = prop->next) {
 		if (prop->type == P_CHOICE || prop->type == P_SELECT)
 			continue;
+		stack.prop = prop;
 		sym2 = sym_check_expr_deps(prop->visible.expr);
 		if (sym2)
 			break;
 		if (prop->type != P_DEFAULT || sym_is_choice(sym))
 			continue;
+		stack.expr = prop->expr;
 		sym2 = sym_check_expr_deps(prop->expr);
 		if (sym2)
 			break;
+		stack.expr = NULL;
 	}
 
+out:
+	dep_stack_remove();
+
 	return sym2;
 }
 
@@ -827,6 +1052,9 @@ static struct symbol *sym_check_choice_deps(struct symbol *choice)
 	struct symbol *sym, *sym2;
 	struct property *prop;
 	struct expr *e;
+	struct dep_stack stack;
+
+	dep_stack_insert(&stack, choice);
 
 	prop = sym_get_choice_prop(choice);
 	expr_list_for_each_sym(prop->expr, e, sym)
@@ -840,10 +1068,8 @@ static struct symbol *sym_check_choice_deps(struct symbol *choice)
 
 	expr_list_for_each_sym(prop->expr, e, sym) {
 		sym2 = sym_check_sym_deps(sym);
-		if (sym2) {
-			fprintf(stderr, " -> %s", sym->name);
+		if (sym2)
 			break;
-		}
 	}
 out:
 	expr_list_for_each_sym(prop->expr, e, sym)
@@ -853,6 +1079,8 @@ out:
 	    prop_get_symbol(sym_get_choice_prop(sym2)) == choice)
 		sym2 = choice;
 
+	dep_stack_remove();
+
 	return sym2;
 }
 
@@ -862,18 +1090,20 @@ struct symbol *sym_check_deps(struct symbol *sym)
 	struct property *prop;
 
 	if (sym->flags & SYMBOL_CHECK) {
-		fprintf(stderr, "%s:%d:error: found recursive dependency: %s",
-		        sym->prop->file->name, sym->prop->lineno,
-			sym->name ? sym->name : "<choice>");
+		sym_check_print_recursive(sym);
 		return sym;
 	}
 	if (sym->flags & SYMBOL_CHECKED)
 		return NULL;
 
 	if (sym_is_choice_value(sym)) {
+		struct dep_stack stack;
+
 		/* for choice groups start the check with main choice symbol */
+		dep_stack_insert(&stack, sym);
 		prop = sym_get_choice_prop(sym);
 		sym2 = sym_check_deps(prop_get_symbol(prop));
+		dep_stack_remove();
 	} else if (sym_is_choice(sym)) {
 		sym2 = sym_check_choice_deps(sym);
 	} else {
@@ -882,14 +1112,8 @@ struct symbol *sym_check_deps(struct symbol *sym)
 		sym->flags &= ~SYMBOL_CHECK;
 	}
 
-	if (sym2) {
-		fprintf(stderr, " -> %s", sym->name ? sym->name : "<choice>");
-		if (sym2 == sym) {
-			fprintf(stderr, "\n");
-			zconfnerrs++;
-			sym2 = NULL;
-		}
-	}
+	if (sym2 && sym2 == sym)
+		sym2 = NULL;
 
 	return sym2;
 }
@@ -943,6 +1167,8 @@ const char *prop_get_type_name(enum prop_type type)
 		return "select";
 	case P_RANGE:
 		return "range";
+	case P_SYMBOL:
+		return "symbol";
 	case P_UNKNOWN:
 		break;
 	}
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 5758aab0d8b..88f3f07205f 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -884,16 +884,16 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
 	char *zeros = NULL;
 
 	/* We're looking for a section relative symbol */
-	if (!sym->st_shndx || sym->st_shndx >= info->hdr->e_shnum)
+	if (!sym->st_shndx || get_secindex(info, sym) >= info->num_sections)
 		return;
 
 	/* Handle all-NULL symbols allocated into .bss */
-	if (info->sechdrs[sym->st_shndx].sh_type & SHT_NOBITS) {
+	if (info->sechdrs[get_secindex(info, sym)].sh_type & SHT_NOBITS) {
 		zeros = calloc(1, sym->st_size);
 		symval = zeros;
 	} else {
 		symval = (void *)info->hdr
-			+ info->sechdrs[sym->st_shndx].sh_offset
+			+ info->sechdrs[get_secindex(info, sym)].sh_offset
 			+ sym->st_value;
 	}
 
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index f6127b9f5ac..1ce655dde99 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -253,7 +253,7 @@ static enum export export_no(const char *s)
 	return export_unknown;
 }
 
-static enum export export_from_sec(struct elf_info *elf, Elf_Section sec)
+static enum export export_from_sec(struct elf_info *elf, unsigned int sec)
 {
 	if (sec == elf->export_sec)
 		return export_plain;
@@ -373,6 +373,8 @@ static int parse_elf(struct elf_info *info, const char *filename)
 	Elf_Ehdr *hdr;
 	Elf_Shdr *sechdrs;
 	Elf_Sym  *sym;
+	const char *secstrings;
+	unsigned int symtab_idx = ~0U, symtab_shndx_idx = ~0U;
 
 	hdr = grab_file(filename, &info->size);
 	if (!hdr) {
@@ -417,8 +419,27 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		return 0;
 	}
 
+	if (hdr->e_shnum == 0) {
+		/*
+		 * There are more than 64k sections,
+		 * read count from .sh_size.
+		 * note: it doesn't need shndx2secindex()
+		 */
+		info->num_sections = TO_NATIVE(sechdrs[0].sh_size);
+	}
+	else {
+		info->num_sections = hdr->e_shnum;
+	}
+	if (hdr->e_shstrndx == SHN_XINDEX) {
+		info->secindex_strings =
+		    shndx2secindex(TO_NATIVE(sechdrs[0].sh_link));
+	}
+	else {
+		info->secindex_strings = hdr->e_shstrndx;
+	}
+
 	/* Fix endianness in section headers */
-	for (i = 0; i < hdr->e_shnum; i++) {
+	for (i = 0; i < info->num_sections; i++) {
 		sechdrs[i].sh_name      = TO_NATIVE(sechdrs[i].sh_name);
 		sechdrs[i].sh_type      = TO_NATIVE(sechdrs[i].sh_type);
 		sechdrs[i].sh_flags     = TO_NATIVE(sechdrs[i].sh_flags);
@@ -431,9 +452,8 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		sechdrs[i].sh_entsize   = TO_NATIVE(sechdrs[i].sh_entsize);
 	}
 	/* Find symbol table. */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		const char *secstrings
-			= (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	secstrings = (void *)hdr + sechdrs[info->secindex_strings].sh_offset;
+	for (i = 1; i < info->num_sections; i++) {
 		const char *secname;
 		int nobits = sechdrs[i].sh_type == SHT_NOBITS;
 
@@ -461,14 +481,26 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		else if (strcmp(secname, "__ksymtab_gpl_future") == 0)
 			info->export_gpl_future_sec = i;
 
-		if (sechdrs[i].sh_type != SHT_SYMTAB)
-			continue;
+		if (sechdrs[i].sh_type == SHT_SYMTAB) {
+			unsigned int sh_link_idx;
+			symtab_idx = i;
+			info->symtab_start = (void *)hdr +
+			    sechdrs[i].sh_offset;
+			info->symtab_stop  = (void *)hdr +
+			    sechdrs[i].sh_offset + sechdrs[i].sh_size;
+			sh_link_idx = shndx2secindex(sechdrs[i].sh_link);
+			info->strtab       = (void *)hdr +
+			    sechdrs[sh_link_idx].sh_offset;
+		}
 
-		info->symtab_start = (void *)hdr + sechdrs[i].sh_offset;
-		info->symtab_stop  = (void *)hdr + sechdrs[i].sh_offset
-			                         + sechdrs[i].sh_size;
-		info->strtab       = (void *)hdr +
-			             sechdrs[sechdrs[i].sh_link].sh_offset;
+		/* 32bit section no. table? ("more than 64k sections") */
+		if (sechdrs[i].sh_type == SHT_SYMTAB_SHNDX) {
+			symtab_shndx_idx = i;
+			info->symtab_shndx_start = (void *)hdr +
+			    sechdrs[i].sh_offset;
+			info->symtab_shndx_stop  = (void *)hdr +
+			    sechdrs[i].sh_offset + sechdrs[i].sh_size;
+		}
 	}
 	if (!info->symtab_start)
 		fatal("%s has no symtab?\n", filename);
@@ -480,6 +512,21 @@ static int parse_elf(struct elf_info *info, const char *filename)
 		sym->st_value = TO_NATIVE(sym->st_value);
 		sym->st_size  = TO_NATIVE(sym->st_size);
 	}
+
+	if (symtab_shndx_idx != ~0U) {
+		Elf32_Word *p;
+		if (symtab_idx !=
+		    shndx2secindex(sechdrs[symtab_shndx_idx].sh_link))
+			fatal("%s: SYMTAB_SHNDX has bad sh_link: %u!=%u\n",
+			      filename,
+			      shndx2secindex(sechdrs[symtab_shndx_idx].sh_link),
+			      symtab_idx);
+		/* Fix endianness */
+		for (p = info->symtab_shndx_start; p < info->symtab_shndx_stop;
+		     p++)
+			*p = TO_NATIVE(*p);
+	}
+
 	return 1;
 }
 
@@ -519,7 +566,7 @@ static void handle_modversions(struct module *mod, struct elf_info *info,
 			       Elf_Sym *sym, const char *symname)
 {
 	unsigned int crc;
-	enum export export = export_from_sec(info, sym->st_shndx);
+	enum export export = export_from_sec(info, get_secindex(info, sym));
 
 	switch (sym->st_shndx) {
 	case SHN_COMMON:
@@ -661,19 +708,19 @@ static const char *sym_name(struct elf_info *elf, Elf_Sym *sym)
 		return "(unknown)";
 }
 
-static const char *sec_name(struct elf_info *elf, int shndx)
+static const char *sec_name(struct elf_info *elf, int secindex)
 {
 	Elf_Shdr *sechdrs = elf->sechdrs;
 	return (void *)elf->hdr +
-	        elf->sechdrs[elf->hdr->e_shstrndx].sh_offset +
-	        sechdrs[shndx].sh_name;
+		elf->sechdrs[elf->secindex_strings].sh_offset +
+		sechdrs[secindex].sh_name;
 }
 
 static const char *sech_name(struct elf_info *elf, Elf_Shdr *sechdr)
 {
 	return (void *)elf->hdr +
-	        elf->sechdrs[elf->hdr->e_shstrndx].sh_offset +
-	        sechdr->sh_name;
+		elf->sechdrs[elf->secindex_strings].sh_offset +
+		sechdr->sh_name;
 }
 
 /* if sym is empty or point to a string
@@ -1052,11 +1099,14 @@ static Elf_Sym *find_elf_symbol(struct elf_info *elf, Elf64_Sword addr,
 	Elf_Sym *near = NULL;
 	Elf64_Sword distance = 20;
 	Elf64_Sword d;
+	unsigned int relsym_secindex;
 
 	if (relsym->st_name != 0)
 		return relsym;
+
+	relsym_secindex = get_secindex(elf, relsym);
 	for (sym = elf->symtab_start; sym < elf->symtab_stop; sym++) {
-		if (sym->st_shndx != relsym->st_shndx)
+		if (get_secindex(elf, sym) != relsym_secindex)
 			continue;
 		if (ELF_ST_TYPE(sym->st_info) == STT_SECTION)
 			continue;
@@ -1118,9 +1168,9 @@ static Elf_Sym *find_elf_symbol2(struct elf_info *elf, Elf_Addr addr,
 	for (sym = elf->symtab_start; sym < elf->symtab_stop; sym++) {
 		const char *symsec;
 
-		if (sym->st_shndx >= SHN_LORESERVE)
+		if (is_shndx_special(sym->st_shndx))
 			continue;
-		symsec = sec_name(elf, sym->st_shndx);
+		symsec = sec_name(elf, get_secindex(elf, sym));
 		if (strcmp(symsec, sec) != 0)
 			continue;
 		if (!is_valid_name(elf, sym))
@@ -1195,6 +1245,8 @@ static void report_sec_mismatch(const char *modname,
 {
 	const char *from, *from_p;
 	const char *to, *to_p;
+	char *prl_from;
+	char *prl_to;
 
 	switch (from_is_func) {
 	case 0: from = "variable"; from_p = "";   break;
@@ -1218,16 +1270,21 @@ static void report_sec_mismatch(const char *modname,
 
 	switch (mismatch->mismatch) {
 	case TEXT_TO_ANY_INIT:
+		prl_from = sec2annotation(fromsec);
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The function %s%s() references\n"
 		"the %s %s%s%s.\n"
 		"This is often because %s lacks a %s\n"
 		"annotation or the annotation of %s is wrong.\n",
-		sec2annotation(fromsec), fromsym,
-		to, sec2annotation(tosec), tosym, to_p,
-		fromsym, sec2annotation(tosec), tosym);
+		prl_from, fromsym,
+		to, prl_to, tosym, to_p,
+		fromsym, prl_to, tosym);
+		free(prl_from);
+		free(prl_to);
 		break;
 	case DATA_TO_ANY_INIT: {
+		prl_to = sec2annotation(tosec);
 		const char *const *s = mismatch->symbol_white_list;
 		fprintf(stderr,
 		"The variable %s references\n"
@@ -1235,20 +1292,24 @@ static void report_sec_mismatch(const char *modname,
 		"If the reference is valid then annotate the\n"
 		"variable with __init* or __refdata (see linux/init.h) "
 		"or name the variable:\n",
-		fromsym, to, sec2annotation(tosec), tosym, to_p);
+		fromsym, to, prl_to, tosym, to_p);
 		while (*s)
 			fprintf(stderr, "%s, ", *s++);
 		fprintf(stderr, "\n");
+		free(prl_to);
 		break;
 	}
 	case TEXT_TO_ANY_EXIT:
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The function %s() references a %s in an exit section.\n"
 		"Often the %s %s%s has valid usage outside the exit section\n"
 		"and the fix is to remove the %sannotation of %s.\n",
-		fromsym, to, to, tosym, to_p, sec2annotation(tosec), tosym);
+		fromsym, to, to, tosym, to_p, prl_to, tosym);
+		free(prl_to);
 		break;
 	case DATA_TO_ANY_EXIT: {
+		prl_to = sec2annotation(tosec);
 		const char *const *s = mismatch->symbol_white_list;
 		fprintf(stderr,
 		"The variable %s references\n"
@@ -1256,24 +1317,31 @@ static void report_sec_mismatch(const char *modname,
 		"If the reference is valid then annotate the\n"
 		"variable with __exit* (see linux/init.h) or "
 		"name the variable:\n",
-		fromsym, to, sec2annotation(tosec), tosym, to_p);
+		fromsym, to, prl_to, tosym, to_p);
 		while (*s)
 			fprintf(stderr, "%s, ", *s++);
 		fprintf(stderr, "\n");
+		free(prl_to);
 		break;
 	}
 	case XXXINIT_TO_SOME_INIT:
 	case XXXEXIT_TO_SOME_EXIT:
+		prl_from = sec2annotation(fromsec);
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
 		"If %s is only used by %s then\n"
 		"annotate %s with a matching annotation.\n",
-		from, sec2annotation(fromsec), fromsym, from_p,
-		to, sec2annotation(tosec), tosym, to_p,
+		from, prl_from, fromsym, from_p,
+		to, prl_to, tosym, to_p,
 		tosym, fromsym, tosym);
+		free(prl_from);
+		free(prl_to);
 		break;
 	case ANY_INIT_TO_ANY_EXIT:
+		prl_from = sec2annotation(fromsec);
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
@@ -1282,11 +1350,15 @@ static void report_sec_mismatch(const char *modname,
 		"uses functionality in the exit path.\n"
 		"The fix is often to remove the %sannotation of\n"
 		"%s%s so it may be used outside an exit section.\n",
-		from, sec2annotation(fromsec), fromsym, from_p,
-		to, sec2annotation(tosec), tosym, to_p,
+		from, prl_from, fromsym, from_p,
+		to, prl_to, tosym, to_p,
 		sec2annotation(tosec), tosym, to_p);
+		free(prl_from);
+		free(prl_to);
 		break;
 	case ANY_EXIT_TO_ANY_INIT:
+		prl_from = sec2annotation(fromsec);
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The %s %s%s%s references\n"
 		"a %s %s%s%s.\n"
@@ -1295,16 +1367,20 @@ static void report_sec_mismatch(const char *modname,
 		"uses functionality in the init path.\n"
 		"The fix is often to remove the %sannotation of\n"
 		"%s%s so it may be used outside an init section.\n",
-		from, sec2annotation(fromsec), fromsym, from_p,
-		to, sec2annotation(tosec), tosym, to_p,
-		sec2annotation(tosec), tosym, to_p);
+		from, prl_from, fromsym, from_p,
+		to, prl_to, tosym, to_p,
+		prl_to, tosym, to_p);
+		free(prl_from);
+		free(prl_to);
 		break;
 	case EXPORT_TO_INIT_EXIT:
+		prl_to = sec2annotation(tosec);
 		fprintf(stderr,
 		"The symbol %s is exported and annotated %s\n"
 		"Fix this by removing the %sannotation of %s "
 		"or drop the export.\n",
-		tosym, sec2annotation(tosec), sec2annotation(tosec), tosym);
+		tosym, prl_to, prl_to, tosym);
+		free(prl_to);
 		break;
 	}
 	fprintf(stderr, "\n");
@@ -1316,7 +1392,7 @@ static void check_section_mismatch(const char *modname, struct elf_info *elf,
 	const char *tosec;
 	const struct sectioncheck *mismatch;
 
-	tosec = sec_name(elf, sym->st_shndx);
+	tosec = sec_name(elf, get_secindex(elf, sym));
 	mismatch = section_mismatch(fromsec, tosec);
 	if (mismatch) {
 		Elf_Sym *to;
@@ -1344,7 +1420,7 @@ static unsigned int *reloc_location(struct elf_info *elf,
 				    Elf_Shdr *sechdr, Elf_Rela *r)
 {
 	Elf_Shdr *sechdrs = elf->sechdrs;
-	int section = sechdr->sh_info;
+	int section = shndx2secindex(sechdr->sh_info);
 
 	return (void *)elf->hdr + sechdrs[section].sh_offset +
 		r->r_offset - sechdrs[section].sh_addr;
@@ -1452,7 +1528,7 @@ static void section_rela(const char *modname, struct elf_info *elf,
 		r.r_addend = TO_NATIVE(rela->r_addend);
 		sym = elf->symtab_start + r_sym;
 		/* Skip special sections */
-		if (sym->st_shndx >= SHN_LORESERVE)
+		if (is_shndx_special(sym->st_shndx))
 			continue;
 		check_section_mismatch(modname, elf, &r, sym, fromsec);
 	}
@@ -1510,7 +1586,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
 		}
 		sym = elf->symtab_start + r_sym;
 		/* Skip special sections */
-		if (sym->st_shndx >= SHN_LORESERVE)
+		if (is_shndx_special(sym->st_shndx))
 			continue;
 		check_section_mismatch(modname, elf, &r, sym, fromsec);
 	}
@@ -1535,7 +1611,7 @@ static void check_sec_ref(struct module *mod, const char *modname,
 	Elf_Shdr *sechdrs = elf->sechdrs;
 
 	/* Walk through all sections */
-	for (i = 0; i < elf->hdr->e_shnum; i++) {
+	for (i = 0; i < elf->num_sections; i++) {
 		check_section(modname, elf, &elf->sechdrs[i]);
 		/* We want to process only relocation sections and not .init */
 		if (sechdrs[i].sh_type == SHT_RELA)
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index be987a44f25..0388cfccac8 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -129,8 +129,51 @@ struct elf_info {
 	const char   *strtab;
 	char	     *modinfo;
 	unsigned int modinfo_len;
+
+	/* support for 32bit section numbers */
+
+	unsigned int num_sections; /* max_secindex + 1 */
+	unsigned int secindex_strings;
+	/* if Nth symbol table entry has .st_shndx = SHN_XINDEX,
+	 * take shndx from symtab_shndx_start[N] instead */
+	Elf32_Word   *symtab_shndx_start;
+	Elf32_Word   *symtab_shndx_stop;
 };
 
+static inline int is_shndx_special(unsigned int i)
+{
+	return i != SHN_XINDEX && i >= SHN_LORESERVE && i <= SHN_HIRESERVE;
+}
+
+/* shndx is in [0..SHN_LORESERVE) U (SHN_HIRESERVE, 0xfffffff], thus:
+ * shndx == 0               <=> sechdrs[0]
+ * ......
+ * shndx == SHN_LORESERVE-1 <=> sechdrs[SHN_LORESERVE-1]
+ * shndx == SHN_HIRESERVE+1 <=> sechdrs[SHN_LORESERVE]
+ * shndx == SHN_HIRESERVE+2 <=> sechdrs[SHN_LORESERVE+1]
+ * ......
+ * fyi: sym->st_shndx is uint16, SHN_LORESERVE = ff00, SHN_HIRESERVE = ffff,
+ * so basically we map  0000..feff -> 0000..feff
+ *                      ff00..ffff -> (you are a bad boy, dont do it)
+ *                     10000..xxxx -> ff00..(xxxx-0x100)
+ */
+static inline unsigned int shndx2secindex(unsigned int i)
+{
+	if (i <= SHN_HIRESERVE)
+		return i;
+	return i - (SHN_HIRESERVE + 1 - SHN_LORESERVE);
+}
+
+/* Accessor for sym->st_shndx, hides ugliness of "64k sections" */
+static inline unsigned int get_secindex(const struct elf_info *info,
+					const Elf_Sym *sym)
+{
+	if (sym->st_shndx != SHN_XINDEX)
+		return sym->st_shndx;
+	return shndx2secindex(info->symtab_shndx_start[sym -
+						       info->symtab_start]);
+}
+
 /* file2alias.c */
 extern unsigned int cross_build;
 void handle_moddevtable(struct module *mod, struct elf_info *info,
diff --git a/scripts/package/Makefile b/scripts/package/Makefile
index d2c29b63add..d0b931b994f 100644
--- a/scripts/package/Makefile
+++ b/scripts/package/Makefile
@@ -111,13 +111,38 @@ tar%pkg: FORCE
 clean-dirs += $(objtree)/tar-install/
 
 
+# perf-pkg - generate a source tarball with perf source
+# ---------------------------------------------------------------------------
+
+perf-tar=perf-$(KERNELVERSION)
+
+quiet_cmd_perf_tar = TAR
+      cmd_perf_tar = \
+git archive --prefix=$(perf-tar)/ HEAD^{tree}                       \
+	$$(cat $(srctree)/tools/perf/MANIFEST) -o $(perf-tar).tar;  \
+mkdir -p $(perf-tar);                                               \
+git rev-parse HEAD > $(perf-tar)/HEAD;                              \
+tar rf $(perf-tar).tar $(perf-tar)/HEAD;                            \
+rm -r $(perf-tar);                                                  \
+$(if $(findstring tar-src,$@),,                                     \
+$(if $(findstring bz2,$@),bzip2,                                    \
+$(if $(findstring gz,$@),gzip,                                      \
+$(error unknown target $@)))                                       \
+	-f -9 $(perf-tar).tar)
+
+perf-%pkg: FORCE
+	$(call cmd,perf_tar)
+
 # Help text displayed when executing 'make help'
 # ---------------------------------------------------------------------------
 help: FORCE
-	@echo '  rpm-pkg         - Build both source and binary RPM kernel packages'
-	@echo '  binrpm-pkg      - Build only the binary kernel package'
-	@echo '  deb-pkg         - Build the kernel as an deb package'
-	@echo '  tar-pkg         - Build the kernel as an uncompressed tarball'
-	@echo '  targz-pkg       - Build the kernel as a gzip compressed tarball'
-	@echo '  tarbz2-pkg      - Build the kernel as a bzip2 compressed tarball'
+	@echo '  rpm-pkg             - Build both source and binary RPM kernel packages'
+	@echo '  binrpm-pkg          - Build only the binary kernel package'
+	@echo '  deb-pkg             - Build the kernel as an deb package'
+	@echo '  tar-pkg             - Build the kernel as an uncompressed tarball'
+	@echo '  targz-pkg           - Build the kernel as a gzip compressed tarball'
+	@echo '  tarbz2-pkg          - Build the kernel as a bzip2 compressed tarball'
+	@echo '  perf-tar-src-pkg    - Build $(perf-tar).tar source tarball'
+	@echo '  perf-targz-src-pkg  - Build $(perf-tar).tar.gz source tarball'
+	@echo '  perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
 
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index 07f2fbde2ab..5f1e2fc7f17 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -148,10 +148,11 @@ EOF
 # Generate a control file
 cat <<EOF > debian/control
 Source: linux-upstream
-Section: admin
+Section: kernel
 Priority: optional
 Maintainer: $maintainer
-Standards-Version: 3.8.1
+Standards-Version: 3.8.4
+Homepage: http://www.kernel.org/
 EOF
 
 if [ "$ARCH" = "um" ]; then
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index f3c9c0a90b9..0171060b5fd 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -326,7 +326,7 @@ if ($arch eq "x86_64") {
     #                    14: R_MIPS_NONE *ABS*
     #	 18:   00020021        nop
     if ($is_module eq "0") {
-	    $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s_mcount\$";
+	    $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_26\\s+_mcount\$";
     } else {
 	    $mcount_regex = "^\\s*([0-9a-fA-F]+): R_MIPS_HI16\\s+_mcount\$";
     }
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
index 72555b9ca7d..9b9013b2e32 100644
--- a/security/apparmor/Kconfig
+++ b/security/apparmor/Kconfig
@@ -1,6 +1,6 @@
 config SECURITY_APPARMOR
 	bool "AppArmor support"
-	depends on SECURITY
+	depends on SECURITY && NET
 	select AUDIT
 	select SECURITY_PATH
 	select SECURITYFS
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 0d26f689bd7..0088dd8bf68 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -537,6 +537,8 @@ int wait_for_key_construction(struct key *key, bool intr)
 			  intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
 	if (ret < 0)
 		return ret;
+	if (test_bit(KEY_FLAG_NEGATIVE, &key->flags))
+		return -ENOKEY;
 	return key_validate(key);
 }
 EXPORT_SYMBOL(wait_for_key_construction);
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index f013982df41..58d80f3bd6f 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -25,6 +25,6 @@ $(obj)/avc.o: $(obj)/flask.h
 quiet_cmd_flask = GEN     $(obj)/flask.h $(obj)/av_permissions.h
       cmd_flask = scripts/selinux/genheaders/genheaders $(obj)/flask.h $(obj)/av_permissions.h
 
-targets += flask.h
+targets += flask.h av_permissions.h
 $(obj)/flask.h: $(src)/include/classmap.h FORCE
 	$(call if_changed,flask)
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index e9d98be190c..e23e0e7ab26 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -67,6 +67,8 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram
 	} else {
 		if (new_hw_ptr == ULONG_MAX) {	/* initialization */
 			snd_pcm_sframes_t avail = snd_pcm_playback_hw_avail(runtime);
+			if (avail > runtime->buffer_size)
+				avail = runtime->buffer_size;
 			runtime->silence_filled = avail > 0 ? avail : 0;
 			runtime->silence_start = (runtime->status->hw_ptr +
 						  runtime->silence_filled) %
@@ -287,8 +289,11 @@ int snd_pcm_update_state(struct snd_pcm_substream *substream,
 			return -EPIPE;
 		}
 	}
-	if (avail >= runtime->control->avail_min)
-		wake_up(runtime->twake ? &runtime->tsleep : &runtime->sleep);
+	if (runtime->twake) {
+		if (avail >= runtime->twake)
+			wake_up(&runtime->tsleep);
+	} else if (avail >= runtime->control->avail_min)
+		wake_up(&runtime->sleep);
 	return 0;
 }
 
@@ -1707,7 +1712,7 @@ EXPORT_SYMBOL(snd_pcm_period_elapsed);
  * The available space is stored on availp.  When err = 0 and avail = 0
  * on the capture stream, it indicates the stream is in DRAINING state.
  */
-static int wait_for_avail_min(struct snd_pcm_substream *substream,
+static int wait_for_avail(struct snd_pcm_substream *substream,
 			      snd_pcm_uframes_t *availp)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
@@ -1757,7 +1762,7 @@ static int wait_for_avail_min(struct snd_pcm_substream *substream,
 			avail = snd_pcm_playback_avail(runtime);
 		else
 			avail = snd_pcm_capture_avail(runtime);
-		if (avail >= runtime->control->avail_min)
+		if (avail >= runtime->twake)
 			break;
 	}
  _endloop:
@@ -1820,7 +1825,7 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(struct snd_pcm_substream *substream,
 		goto _end_unlock;
 	}
 
-	runtime->twake = 1;
+	runtime->twake = runtime->control->avail_min ? : 1;
 	while (size > 0) {
 		snd_pcm_uframes_t frames, appl_ptr, appl_ofs;
 		snd_pcm_uframes_t avail;
@@ -1833,7 +1838,9 @@ static snd_pcm_sframes_t snd_pcm_lib_write1(struct snd_pcm_substream *substream,
 				err = -EAGAIN;
 				goto _end_unlock;
 			}
-			err = wait_for_avail_min(substream, &avail);
+			runtime->twake = min_t(snd_pcm_uframes_t, size,
+					runtime->control->avail_min ? : 1);
+			err = wait_for_avail(substream, &avail);
 			if (err < 0)
 				goto _end_unlock;
 		}
@@ -2042,7 +2049,7 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(struct snd_pcm_substream *substream,
 		goto _end_unlock;
 	}
 
-	runtime->twake = 1;
+	runtime->twake = runtime->control->avail_min ? : 1;
 	while (size > 0) {
 		snd_pcm_uframes_t frames, appl_ptr, appl_ofs;
 		snd_pcm_uframes_t avail;
@@ -2060,7 +2067,9 @@ static snd_pcm_sframes_t snd_pcm_lib_read1(struct snd_pcm_substream *substream,
 				err = -EAGAIN;
 				goto _end_unlock;
 			}
-			err = wait_for_avail_min(substream, &avail);
+			runtime->twake = min_t(snd_pcm_uframes_t, size,
+					runtime->control->avail_min ? : 1);
+			err = wait_for_avail(substream, &avail);
 			if (err < 0)
 				goto _end_unlock;
 			if (!avail)
diff --git a/sound/core/pcm_misc.c b/sound/core/pcm_misc.c
index ea2bf82c937..434af3c56d5 100644
--- a/sound/core/pcm_misc.c
+++ b/sound/core/pcm_misc.c
@@ -128,6 +128,14 @@ static struct pcm_format_data pcm_formats[SNDRV_PCM_FORMAT_LAST+1] = {
 		.width = 4, .phys = 4, .le = -1, .signd = -1,
 		.silence = {},
 	},
+	[SNDRV_PCM_FORMAT_G723_24] = {
+		.width = 3, .phys = 3, .le = -1, .signd = -1,
+		.silence = {},
+	},
+	[SNDRV_PCM_FORMAT_G723_40] = {
+		.width = 5, .phys = 5, .le = -1, .signd = -1,
+		.silence = {},
+	},
 	/* FIXME: the following three formats are not defined properly yet */
 	[SNDRV_PCM_FORMAT_MPEG] = {
 		.le = -1, .signd = -1,
@@ -186,6 +194,14 @@ static struct pcm_format_data pcm_formats[SNDRV_PCM_FORMAT_LAST+1] = {
 		.width = 18, .phys = 24, .le = 0, .signd = 0,
 		.silence = { 0x02, 0x00, 0x00 },
 	},
+	[SNDRV_PCM_FORMAT_G723_24_1B] = {
+		.width = 3, .phys = 8, .le = -1, .signd = -1,
+		.silence = {},
+	},
+	[SNDRV_PCM_FORMAT_G723_40_1B] = {
+		.width = 5, .phys = 8, .le = -1, .signd = -1,
+		.silence = {},
+	},
 };
 
 
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index c290cee4cee..480c38623da 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -170,9 +170,25 @@ config SND_AC97_POWER_SAVE
 	  AC97 codecs.  In this mode, the power-mode is dynamically
 	  controlled at each open/close.
 
-	  The mode is activated by passing power_save=1 option to
-	  snd-ac97-codec driver.  You can toggle it dynamically over
-	  sysfs, too.
+	  The mode is activated by passing 'power_save=X' to the
+	  snd-ac97-codec driver module, where 'X' is the time-out
+	  value, a nonnegative integer that specifies how many
+	  seconds of idle time the driver must count before it may
+	  put the AC97 into power-save mode;  a value of 0 (zero)
+	  disables the use of this power-save mode.
+
+	  After the snd-ac97-codec driver module has been loaded,
+	  the 'power_save' parameter can be set via sysfs as follows:
+
+	    echo 10 > /sys/module/snd_ac97_codec/parameters/power_save
+
+	  In this case, the time-out is set to 10 seconds; setting
+	  the time-out to 1 second (the minimum activation value)
+	  isn't recommended because many applications try to reopen
+	  the device frequently.  A value of 10 seconds would be a
+	  good choice for normal operations.
+
+	  See Documentation/sound/alsa/powersave.txt for more details.
 
 config SND_AC97_POWER_SAVE_DEFAULT
 	int "Default time-out for AC97 power-save mode"
@@ -182,4 +198,6 @@ config SND_AC97_POWER_SAVE_DEFAULT
 	  The default time-out value in seconds for AC97 automatic
 	  power-save mode.  0 means to disable the power-save mode.
 
+	  See SND_AC97_POWER_SAVE for more details.
+
 endif	# SND_DRIVERS
diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index 60b6abd7161..5f3e68401f9 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -549,7 +549,10 @@ static int __devinit snd_msnd_attach(struct snd_card *card)
 		printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", chip->irq);
 		return err;
 	}
-	request_region(chip->io, DSP_NUMIO, card->shortname);
+	if (request_region(chip->io, DSP_NUMIO, card->shortname) == NULL) {
+		free_irq(chip->irq, chip);
+		return -EBUSY;
+	}
 
 	if (!request_mem_region(chip->base, BUFFSIZE, card->shortname)) {
 		printk(KERN_ERR LOGNAME
diff --git a/sound/isa/sb/emu8000_pcm.c b/sound/isa/sb/emu8000_pcm.c
index ccedbfed061..2f85c66f8e3 100644
--- a/sound/isa/sb/emu8000_pcm.c
+++ b/sound/isa/sb/emu8000_pcm.c
@@ -433,7 +433,8 @@ static int emu8k_transfer_block(struct snd_emu8000 *emu, int offset, unsigned sh
 	while (count > 0) {
 		unsigned short sval;
 		CHECK_SCHEDULER();
-		get_user(sval, buf);
+		if (get_user(sval, buf))
+			return -EFAULT;
 		EMU8000_SMLD_WRITE(emu, sval);
 		buf++;
 		count--;
@@ -525,12 +526,14 @@ static int emu8k_pcm_copy(struct snd_pcm_substream *subs,
 	while (count-- > 0) {
 		unsigned short sval;
 		CHECK_SCHEDULER();
-		get_user(sval, buf);
+		if (get_user(sval, buf))
+			return -EFAULT;
 		EMU8000_SMLD_WRITE(emu, sval);
 		buf++;
 		if (rec->voices > 1) {
 			CHECK_SCHEDULER();
-			get_user(sval, buf);
+			if (get_user(sval, buf))
+				return -EFAULT;
 			EMU8000_SMRD_WRITE(emu, sval);
 			buf++;
 		}
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index c1070e33b32..c4a4cdc07ab 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -43,6 +43,7 @@
 #include <linux/sound.h>
 #include <linux/slab.h>
 #include <linux/soundcard.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -162,19 +163,10 @@ ld2(unsigned int x)
 static void
 au1550_delay(int msec)
 {
-	unsigned long   tmo;
-	signed long     tmo2;
-
 	if (in_interrupt())
 		return;
 
-	tmo = jiffies + (msec * HZ) / 1000;
-	for (;;) {
-		tmo2 = tmo - jiffies;
-		if (tmo2 <= 0)
-			break;
-		schedule_timeout(tmo2);
-	}
+	schedule_timeout_uninterruptible(msecs_to_jiffies(msec));
 }
 
 static u16
@@ -807,7 +799,9 @@ au1550_llseek(struct file *file, loff_t offset, int origin)
 static int
 au1550_open_mixdev(struct inode *inode, struct file *file)
 {
+	lock_kernel();
 	file->private_data = &au1550_state;
+	unlock_kernel();
 	return 0;
 }
 
@@ -824,22 +818,26 @@ mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
 	return codec->mixer_ioctl(codec, cmd, arg);
 }
 
-static int
-au1550_ioctl_mixdev(struct inode *inode, struct file *file,
-			       unsigned int cmd, unsigned long arg)
+static long
+au1550_ioctl_mixdev(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct au1550_state *s = (struct au1550_state *)file->private_data;
 	struct ac97_codec *codec = s->codec;
+	int ret;
 
-	return mixdev_ioctl(codec, cmd, arg);
+	lock_kernel();
+	ret = mixdev_ioctl(codec, cmd, arg);
+	unlock_kernel();
+
+	return ret;
 }
 
 static /*const */ struct file_operations au1550_mixer_fops = {
-	owner:THIS_MODULE,
-	llseek:au1550_llseek,
-	ioctl:au1550_ioctl_mixdev,
-	open:au1550_open_mixdev,
-	release:au1550_release_mixdev,
+	.owner		= THIS_MODULE,
+	.llseek		= au1550_llseek,
+	.unlocked_ioctl	= au1550_ioctl_mixdev,
+	.open		= au1550_open_mixdev,
+	.release	= au1550_release_mixdev,
 };
 
 static int
@@ -1343,8 +1341,7 @@ dma_count_done(struct dmabuf *db)
 
 
 static int
-au1550_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-							unsigned long arg)
+au1550_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct au1550_state *s = (struct au1550_state *)file->private_data;
 	unsigned long   flags;
@@ -1780,6 +1777,17 @@ au1550_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 	return mixdev_ioctl(s->codec, cmd, arg);
 }
 
+static long
+au1550_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = au1550_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
 
 static int
 au1550_open(struct inode *inode, struct file *file)
@@ -1797,21 +1805,22 @@ au1550_open(struct inode *inode, struct file *file)
 #endif
 
 	file->private_data = s;
+	lock_kernel();
 	/* wait for device to become free */
 	mutex_lock(&s->open_mutex);
 	while (s->open_mode & file->f_mode) {
-		if (file->f_flags & O_NONBLOCK) {
-			mutex_unlock(&s->open_mutex);
-			return -EBUSY;
-		}
+		ret = -EBUSY;
+		if (file->f_flags & O_NONBLOCK)
+			goto out;
 		add_wait_queue(&s->open_wait, &wait);
 		__set_current_state(TASK_INTERRUPTIBLE);
 		mutex_unlock(&s->open_mutex);
 		schedule();
 		remove_wait_queue(&s->open_wait, &wait);
 		set_current_state(TASK_RUNNING);
+		ret = -ERESTARTSYS;
 		if (signal_pending(current))
-			return -ERESTARTSYS;
+			goto out2;
 		mutex_lock(&s->open_mutex);
 	}
 
@@ -1840,17 +1849,21 @@ au1550_open(struct inode *inode, struct file *file)
 
 	if (file->f_mode & FMODE_READ) {
 		if ((ret = prog_dmabuf_adc(s)))
-			return ret;
+			goto out;
 	}
 	if (file->f_mode & FMODE_WRITE) {
 		if ((ret = prog_dmabuf_dac(s)))
-			return ret;
+			goto out;
 	}
 
 	s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
-	mutex_unlock(&s->open_mutex);
 	mutex_init(&s->sem);
-	return 0;
+	ret = 0;
+out:
+	mutex_unlock(&s->open_mutex);
+out2:
+	unlock_kernel();
+	return ret;
 }
 
 static int
@@ -1885,15 +1898,15 @@ au1550_release(struct inode *inode, struct file *file)
 }
 
 static /*const */ struct file_operations au1550_audio_fops = {
-	owner:		THIS_MODULE,
-	llseek:		au1550_llseek,
-	read:		au1550_read,
-	write:		au1550_write,
-	poll:		au1550_poll,
-	ioctl:		au1550_ioctl,
-	mmap:		au1550_mmap,
-	open:		au1550_open,
-	release:	au1550_release,
+	.owner		= THIS_MODULE,
+	.llseek		= au1550_llseek,
+	.read		= au1550_read,
+	.write		= au1550_write,
+	.poll		= au1550_poll,
+	.unlocked_ioctl	= au1550_unlocked_ioctl,
+	.mmap		= au1550_mmap,
+	.open		= au1550_open,
+	.release	= au1550_release,
 };
 
 MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c
index 3f3c3f71db4..6ecd41abb06 100644
--- a/sound/oss/dmasound/dmasound_core.c
+++ b/sound/oss/dmasound/dmasound_core.c
@@ -323,9 +323,13 @@ static struct {
 
 static int mixer_open(struct inode *inode, struct file *file)
 {
-	if (!try_module_get(dmasound.mach.owner))
+	lock_kernel();
+	if (!try_module_get(dmasound.mach.owner)) {
+		unlock_kernel();
 		return -ENODEV;
+	}
 	mixer.busy = 1;
+	unlock_kernel();
 	return 0;
 }
 
@@ -337,8 +341,8 @@ static int mixer_release(struct inode *inode, struct file *file)
 	unlock_kernel();
 	return 0;
 }
-static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		       u_long arg)
+
+static int mixer_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	if (_SIOC_DIR(cmd) & _SIOC_WRITE)
 	    mixer.modify_counter++;
@@ -362,11 +366,22 @@ static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd,
 	return -EINVAL;
 }
 
+static long mixer_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = mixer_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static const struct file_operations mixer_fops =
 {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= mixer_ioctl,
+	.unlocked_ioctl	= mixer_unlocked_ioctl,
 	.open		= mixer_open,
 	.release	= mixer_release,
 };
@@ -737,8 +752,11 @@ static int sq_open(struct inode *inode, struct file *file)
 {
 	int rc;
 
-	if (!try_module_get(dmasound.mach.owner))
+	lock_kernel();
+	if (!try_module_get(dmasound.mach.owner)) {
+		unlock_kernel();
 		return -ENODEV;
+	}
 
 	rc = write_sq_open(file); /* checks the f_mode */
 	if (rc)
@@ -781,10 +799,11 @@ static int sq_open(struct inode *inode, struct file *file)
 		sound_set_format(AFMT_MU_LAW);
 	}
 #endif
-
+	unlock_kernel();
 	return 0;
  out:
 	module_put(dmasound.mach.owner);
+	unlock_kernel();
 	return rc;
 }
 
@@ -955,8 +974,7 @@ printk("dmasound_core: tried to set_queue_frags on a locked queue\n") ;
 	return 0 ;
 }
 
-static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
-		    u_long arg)
+static int sq_ioctl(struct file *file, u_int cmd, u_long arg)
 {
 	int val, result;
 	u_long fmt;
@@ -1114,18 +1132,29 @@ static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd,
 		return IOCTL_OUT(arg,val);
 
 	default:
-		return mixer_ioctl(inode, file, cmd, arg);
+		return mixer_ioctl(file, cmd, arg);
 	}
 	return -EINVAL;
 }
 
+static long sq_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = sq_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static const struct file_operations sq_fops =
 {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
 	.write		= sq_write,
 	.poll		= sq_poll,
-	.ioctl		= sq_ioctl,
+	.unlocked_ioctl	= sq_unlocked_ioctl,
 	.open		= sq_open,
 	.release	= sq_release,
 };
@@ -1226,12 +1255,17 @@ static int state_open(struct inode *inode, struct file *file)
 {
 	char *buffer = state.buf;
 	int len = 0;
+	int ret;
 
+	lock_kernel();
+	ret = -EBUSY;
 	if (state.busy)
-		return -EBUSY;
+		goto out;
 
+	ret = -ENODEV;
 	if (!try_module_get(dmasound.mach.owner))
-		return -ENODEV;
+		goto out;
+
 	state.ptr = 0;
 	state.busy = 1;
 
@@ -1293,7 +1327,10 @@ printk("dmasound: stat buffer used %d bytes\n", len) ;
 		printk(KERN_ERR "dmasound_core: stat buffer overflowed!\n");
 
 	state.len = len;
-	return 0;
+	ret = 0;
+out:
+	unlock_kernel();
+	return ret;
 }
 
 static int state_release(struct inode *inode, struct file *file)
diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c
index 3bc7104c537..3c09374ea5b 100644
--- a/sound/oss/midi_synth.c
+++ b/sound/oss/midi_synth.c
@@ -523,7 +523,9 @@ midi_synth_load_patch(int dev, int format, const char __user *addr,
 	{
 		unsigned char   data;
 
-		get_user(*(unsigned char *) &data, (unsigned char __user *) &((addr)[hdr_size + i]));
+		if (get_user(data,
+		    (unsigned char __user *)(addr + hdr_size + i)))
+			return -EFAULT;
 
 		eox_seen = (i > 0 && data & 0x80);	/* End of sysex */
 
diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c
index a1e3f9671be..2e48b17667d 100644
--- a/sound/oss/msnd_pinnacle.c
+++ b/sound/oss/msnd_pinnacle.c
@@ -639,21 +639,26 @@ static int mixer_ioctl(unsigned int cmd, unsigned long arg)
 	return -EINVAL;
 }
 
-static int dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long dev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	int minor = iminor(inode);
+	int minor = iminor(file->f_path.dentry->d_inode);
+	int ret;
 
 	if (cmd == OSS_GETVERSION) {
 		int sound_version = SOUND_VERSION;
 		return put_user(sound_version, (int __user *)arg);
 	}
 
+	ret = -EINVAL;
+
+	lock_kernel();
 	if (minor == dev.dsp_minor)
-		return dsp_ioctl(file, cmd, arg);
+		ret = dsp_ioctl(file, cmd, arg);
 	else if (minor == dev.mixer_minor)
-		return mixer_ioctl(cmd, arg);
+		ret = mixer_ioctl(cmd, arg);
+	unlock_kernel();
 
-	return -EINVAL;
+	return ret;
 }
 
 static void dsp_write_flush(void)
@@ -756,12 +761,15 @@ static int dev_open(struct inode *inode, struct file *file)
 	int minor = iminor(inode);
 	int err = 0;
 
+	lock_kernel();
 	if (minor == dev.dsp_minor) {
 		if ((file->f_mode & FMODE_WRITE &&
 		     test_bit(F_AUDIO_WRITE_INUSE, &dev.flags)) ||
 		    (file->f_mode & FMODE_READ &&
-		     test_bit(F_AUDIO_READ_INUSE, &dev.flags)))
-			return -EBUSY;
+		     test_bit(F_AUDIO_READ_INUSE, &dev.flags))) {
+			err = -EBUSY;
+			goto out;
+		}
 
 		if ((err = dsp_open(file)) >= 0) {
 			dev.nresets = 0;
@@ -782,7 +790,8 @@ static int dev_open(struct inode *inode, struct file *file)
 		/* nothing */
 	} else
 		err = -EINVAL;
-
+out:
+	unlock_kernel();
 	return err;
 }
 
@@ -1105,7 +1114,7 @@ static const struct file_operations dev_fileops = {
 	.owner		= THIS_MODULE,
 	.read		= dev_read,
 	.write		= dev_write,
-	.ioctl		= dev_ioctl,
+	.unlocked_ioctl	= dev_ioctl,
 	.open		= dev_open,
 	.release	= dev_release,
 };
@@ -1391,9 +1400,13 @@ static int __init attach_multisound(void)
 		printk(KERN_ERR LOGNAME ": Couldn't grab IRQ %d\n", dev.irq);
 		return err;
 	}
-	request_region(dev.io, dev.numio, dev.name);
+	if (request_region(dev.io, dev.numio, dev.name) == NULL) {
+		free_irq(dev.irq, &dev);
+		return -EBUSY;
+	}
 
-        if ((err = dsp_full_reset()) < 0) {
+	err = dsp_full_reset();
+	if (err < 0) {
 		release_region(dev.io, dev.numio);
 		free_irq(dev.irq, &dev);
 		return err;
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index 4153752507e..fdb58eb83d4 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -15,7 +15,9 @@
 #include <linux/linkage.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
+#include <linux/smp_lock.h>
 #include <linux/sound.h>
+#include <linux/smp_lock.h>
 #include <linux/soundcard.h>
 #include <linux/interrupt.h>
 #include <linux/hrtimer.h>
@@ -92,7 +94,7 @@ static void dac_audio_set_rate(void)
 	wakeups_per_second = ktime_set(0, 1000000000 / rate);
 }
 
-static int dac_audio_ioctl(struct inode *inode, struct file *file,
+static int dac_audio_ioctl(struct file *file,
 			   unsigned int cmd, unsigned long arg)
 {
 	int val;
@@ -158,6 +160,17 @@ static int dac_audio_ioctl(struct inode *inode, struct file *file,
 	return -EINVAL;
 }
 
+static long dac_audio_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = dac_audio_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static ssize_t dac_audio_write(struct file *file, const char *buf, size_t count,
 			       loff_t * ppos)
 {
@@ -216,13 +229,17 @@ static int dac_audio_open(struct inode *inode, struct file *file)
 {
 	if (file->f_mode & FMODE_READ)
 		return -ENODEV;
-	if (in_use)
+
+	lock_kernel();
+	if (in_use) {
+		unlock_kernel();
 		return -EBUSY;
+	}
 
 	in_use = 1;
 
 	dac_audio_start();
-
+	unlock_kernel();
 	return 0;
 }
 
@@ -237,8 +254,8 @@ static int dac_audio_release(struct inode *inode, struct file *file)
 
 const struct file_operations dac_audio_fops = {
       .read =		dac_audio_read,
-      .write =	dac_audio_write,
-      .ioctl =	dac_audio_ioctl,
+      .write =		dac_audio_write,
+      .unlocked_ioctl =	dac_audio_unlocked_ioctl,
       .open =		dac_audio_open,
       .release =	dac_audio_release,
 };
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 2d9c5131262..92aa762ffb7 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -210,42 +210,44 @@ static int sound_open(struct inode *inode, struct file *file)
 		printk(KERN_ERR "Invalid minor device %d\n", dev);
 		return -ENXIO;
 	}
+	lock_kernel();
 	switch (dev & 0x0f) {
 	case SND_DEV_CTL:
 		dev >>= 4;
 		if (dev >= 0 && dev < MAX_MIXER_DEV && mixer_devs[dev] == NULL) {
 			request_module("mixer%d", dev);
 		}
+		retval = -ENXIO;
 		if (dev && (dev >= num_mixers || mixer_devs[dev] == NULL))
-			return -ENXIO;
+			break;
 	
 		if (!try_module_get(mixer_devs[dev]->owner))
-			return -ENXIO;
+			break;
+
+		retval = 0;
 		break;
 
 	case SND_DEV_SEQ:
 	case SND_DEV_SEQ2:
-		if ((retval = sequencer_open(dev, file)) < 0)
-			return retval;
+		retval = sequencer_open(dev, file);
 		break;
 
 	case SND_DEV_MIDIN:
-		if ((retval = MIDIbuf_open(dev, file)) < 0)
-			return retval;
+		retval = MIDIbuf_open(dev, file);
 		break;
 
 	case SND_DEV_DSP:
 	case SND_DEV_DSP16:
 	case SND_DEV_AUDIO:
-		if ((retval = audio_open(dev, file)) < 0)
-			return retval;
+		retval = audio_open(dev, file);
 		break;
 
 	default:
 		printk(KERN_ERR "Invalid minor device %d\n", dev);
-		return -ENXIO;
+		retval = -ENXIO;
 	}
 
+	unlock_kernel();
 	return 0;
 }
 
diff --git a/sound/oss/swarm_cs4297a.c b/sound/oss/swarm_cs4297a.c
index 3136c88eacd..b15840ad252 100644
--- a/sound/oss/swarm_cs4297a.c
+++ b/sound/oss/swarm_cs4297a.c
@@ -68,6 +68,7 @@
 #include <linux/delay.h>
 #include <linux/sound.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/soundcard.h>
 #include <linux/ac97_codec.h>
 #include <linux/pci.h>
@@ -1534,6 +1535,7 @@ static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
 	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
 		  printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()+\n"));
 
+	lock_kernel();
 	list_for_each(entry, &cs4297a_devs)
 	{
 		s = list_entry(entry, struct cs4297a_state, list);
@@ -1544,6 +1546,8 @@ static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
 	{
 		CS_DBGOUT(CS_FUNCTION | CS_OPEN | CS_ERROR, 2,
 			printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- -ENODEV\n"));
+
+		unlock_kernel();
 		return -ENODEV;
 	}
 	VALIDATE_STATE(s);
@@ -1551,6 +1555,7 @@ static int cs4297a_open_mixdev(struct inode *inode, struct file *file)
 
 	CS_DBGOUT(CS_FUNCTION | CS_OPEN, 4,
 		  printk(KERN_INFO "cs4297a: cs4297a_open_mixdev()- 0\n"));
+	unlock_kernel();
 
 	return nonseekable_open(inode, file);
 }
@@ -1566,11 +1571,15 @@ static int cs4297a_release_mixdev(struct inode *inode, struct file *file)
 }
 
 
-static int cs4297a_ioctl_mixdev(struct inode *inode, struct file *file,
+static int cs4297a_ioctl_mixdev(struct file *file,
 			       unsigned int cmd, unsigned long arg)
 {
-	return mixer_ioctl((struct cs4297a_state *) file->private_data, cmd,
+	int ret;
+	lock_kernel();
+	ret = mixer_ioctl((struct cs4297a_state *) file->private_data, cmd,
 			   arg);
+	unlock_kernel();
+	return ret;
 }
 
 
@@ -1580,7 +1589,7 @@ static int cs4297a_ioctl_mixdev(struct inode *inode, struct file *file,
 static const struct file_operations cs4297a_mixer_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.ioctl		= cs4297a_ioctl_mixdev,
+	.unlocked_ioctl	= cs4297a_ioctl_mixdev,
 	.open		= cs4297a_open_mixdev,
 	.release	= cs4297a_release_mixdev,
 };
@@ -1944,7 +1953,7 @@ static int cs4297a_mmap(struct file *file, struct vm_area_struct *vma)
 }
 
 
-static int cs4297a_ioctl(struct inode *inode, struct file *file,
+static int cs4297a_ioctl(struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
 	struct cs4297a_state *s =
@@ -2337,6 +2346,16 @@ static int cs4297a_ioctl(struct inode *inode, struct file *file,
 	return mixer_ioctl(s, cmd, arg);
 }
 
+static long cs4297a_unlocked_ioctl(struct file *file, u_int cmd, u_long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = cs4297a_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
 
 static int cs4297a_release(struct inode *inode, struct file *file)
 {
@@ -2369,7 +2388,7 @@ static int cs4297a_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static int cs4297a_open(struct inode *inode, struct file *file)
+static int cs4297a_locked_open(struct inode *inode, struct file *file)
 {
 	int minor = iminor(inode);
 	struct cs4297a_state *s=NULL;
@@ -2486,6 +2505,16 @@ static int cs4297a_open(struct inode *inode, struct file *file)
 	return nonseekable_open(inode, file);
 }
 
+static int cs4297a_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	lock_kernel();
+	ret = cs4297a_open(inode, file);
+	unlock_kernel();
+
+	return ret;
+}
 
 // ******************************************************************************************
 //   Wave (audio) file operations struct.
@@ -2496,7 +2525,7 @@ static const struct file_operations cs4297a_audio_fops = {
 	.read		= cs4297a_read,
 	.write		= cs4297a_write,
 	.poll		= cs4297a_poll,
-	.ioctl		= cs4297a_ioctl,
+	.unlocked_ioctl	= cs4297a_unlocked_ioctl,
 	.mmap		= cs4297a_mmap,
 	.open		= cs4297a_open,
 	.release	= cs4297a_release,
diff --git a/sound/oss/vidc.c b/sound/oss/vidc.c
index ac39a531df1..f0e0caa5320 100644
--- a/sound/oss/vidc.c
+++ b/sound/oss/vidc.c
@@ -491,9 +491,6 @@ static void __init attach_vidc(struct address_info *hw_config)
 	vidc_adev = adev;
 	vidc_mixer_set(SOUND_MIXER_VOLUME, (85 | 85 << 8));
 
-#if defined(CONFIG_SOUND_SOFTOSS) || defined(CONFIG_SOUND_SOFTOSS_MODULE)
-	softoss_dev = adev;
-#endif
 	return;
 
 irq_failed:
diff --git a/sound/oss/vwsnd.c b/sound/oss/vwsnd.c
index 20b3b325aa8..8cd73cdd88a 100644
--- a/sound/oss/vwsnd.c
+++ b/sound/oss/vwsnd.c
@@ -2429,8 +2429,7 @@ static unsigned int vwsnd_audio_poll(struct file *file,
 	return mask;
 }
 
-static int vwsnd_audio_do_ioctl(struct inode *inode,
-				struct file *file,
+static int vwsnd_audio_do_ioctl(struct file *file,
 				unsigned int cmd,
 				unsigned long arg)
 {
@@ -2446,8 +2445,8 @@ static int vwsnd_audio_do_ioctl(struct inode *inode,
 	int ival;
 
 	
-	DBGEV("(inode=0x%p, file=0x%p, cmd=0x%x, arg=0x%lx)\n",
-	      inode, file, cmd, arg);
+	DBGEV("(file=0x%p, cmd=0x%x, arg=0x%lx)\n",
+	      file, cmd, arg);
 	switch (cmd) {
 	case OSS_GETVERSION:		/* _SIOR ('M', 118, int) */
 		DBGX("OSS_GETVERSION\n");
@@ -2885,17 +2884,19 @@ static int vwsnd_audio_do_ioctl(struct inode *inode,
 	return -EINVAL;
 }
 
-static int vwsnd_audio_ioctl(struct inode *inode,
-				struct file *file,
+static long vwsnd_audio_ioctl(struct file *file,
 				unsigned int cmd,
 				unsigned long arg)
 {
 	vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data;
 	int ret;
 
+	lock_kernel();
 	mutex_lock(&devc->io_mutex);
-	ret = vwsnd_audio_do_ioctl(inode, file, cmd, arg);
+	ret = vwsnd_audio_do_ioctl(file, cmd, arg);
 	mutex_unlock(&devc->io_mutex);
+	unlock_kernel();
+
 	return ret;
 }
 
@@ -2921,6 +2922,7 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 
 	DBGE("(inode=0x%p, file=0x%p)\n", inode, file);
 
+	lock_kernel();
 	INC_USE_COUNT;
 	for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
 		if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F))
@@ -2928,6 +2930,7 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 
 	if (devc == NULL) {
 		DEC_USE_COUNT;
+		unlock_kernel();
 		return -ENODEV;
 	}
 
@@ -2936,11 +2939,13 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 		mutex_unlock(&devc->open_mutex);
 		if (file->f_flags & O_NONBLOCK) {
 			DEC_USE_COUNT;
+			unlock_kernel();
 			return -EBUSY;
 		}
 		interruptible_sleep_on(&devc->open_wait);
 		if (signal_pending(current)) {
 			DEC_USE_COUNT;
+			unlock_kernel();
 			return -ERESTARTSYS;
 		}
 		mutex_lock(&devc->open_mutex);
@@ -2993,6 +2998,7 @@ static int vwsnd_audio_open(struct inode *inode, struct file *file)
 
 	file->private_data = devc;
 	DBGRV();
+	unlock_kernel();
 	return 0;
 }
 
@@ -3044,7 +3050,7 @@ static const struct file_operations vwsnd_audio_fops = {
 	.read =		vwsnd_audio_read,
 	.write =	vwsnd_audio_write,
 	.poll =		vwsnd_audio_poll,
-	.ioctl =	vwsnd_audio_ioctl,
+	.unlocked_ioctl = vwsnd_audio_ioctl,
 	.mmap =		vwsnd_audio_mmap,
 	.open =		vwsnd_audio_open,
 	.release =	vwsnd_audio_release,
@@ -3062,15 +3068,18 @@ static int vwsnd_mixer_open(struct inode *inode, struct file *file)
 	DBGEV("(inode=0x%p, file=0x%p)\n", inode, file);
 
 	INC_USE_COUNT;
+	lock_kernel();
 	for (devc = vwsnd_dev_list; devc; devc = devc->next_dev)
 		if (devc->mixer_minor == iminor(inode))
 			break;
 
 	if (devc == NULL) {
 		DEC_USE_COUNT;
+		unlock_kernel();
 		return -ENODEV;
 	}
 	file->private_data = devc;
+	unlock_kernel();
 	return 0;
 }
 
@@ -3203,8 +3212,7 @@ static int mixer_write_ioctl(vwsnd_dev_t *devc, unsigned int nr, void __user *ar
 
 /* This is the ioctl entry to the mixer driver. */
 
-static int vwsnd_mixer_ioctl(struct inode *ioctl,
-			      struct file *file,
+static long vwsnd_mixer_ioctl(struct file *file,
 			      unsigned int cmd,
 			      unsigned long arg)
 {
@@ -3215,6 +3223,7 @@ static int vwsnd_mixer_ioctl(struct inode *ioctl,
 
 	DBGEV("(devc=0x%p, cmd=0x%x, arg=0x%lx)\n", devc, cmd, arg);
 
+	lock_kernel();
 	mutex_lock(&devc->mix_mutex);
 	{
 		if ((cmd & ~nrmask) == MIXER_READ(0))
@@ -3225,13 +3234,14 @@ static int vwsnd_mixer_ioctl(struct inode *ioctl,
 			retval = -EINVAL;
 	}
 	mutex_unlock(&devc->mix_mutex);
+	unlock_kernel();
 	return retval;
 }
 
 static const struct file_operations vwsnd_mixer_fops = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
-	.ioctl =	vwsnd_mixer_ioctl,
+	.unlocked_ioctl = vwsnd_mixer_ioctl,
 	.open =		vwsnd_mixer_open,
 	.release =	vwsnd_mixer_release,
 };
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index e688dde6bbd..52468742d9f 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -184,14 +184,8 @@ waveartist_iack(wavnc_info *devc)
 static inline int
 waveartist_sleep(int timeout_ms)
 {
-	unsigned int timeout = timeout_ms * 10 * HZ / 100;
-
-	do {
-		set_current_state(TASK_INTERRUPTIBLE);
-		timeout = schedule_timeout(timeout);
-	} while (timeout);
-
-	return 0;
+	unsigned int timeout = msecs_to_jiffies(timeout_ms*100);
+	return schedule_timeout_interruptible(timeout);
 }
 
 static int
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 6cf1de8042e..0e247cb90ec 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -763,9 +763,9 @@ static void snd_als4000_configure(struct snd_sb *chip)
 	/* SPECS_PAGE: 39 */
 	for (i = ALS4K_GCR91_DMA0_ADDR; i <= ALS4K_GCR96_DMA3_MODE_COUNT; ++i)
 		snd_als4k_gcr_write(chip, i, 0);
-	
+	/* enable burst mode to prevent dropouts during high PCI bus usage */
 	snd_als4k_gcr_write(chip, ALS4K_GCR99_DMA_EMULATION_CTRL,
-		snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL));
+		(snd_als4k_gcr_read(chip, ALS4K_GCR99_DMA_EMULATION_CTRL) & ~0x07) | 0x04);
 	spin_unlock_irq(&chip->reg_lock);
 }
 
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 1db586af4f9..c80b0b863c5 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -460,6 +460,7 @@ static int snd_card_asihpi_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct snd_card_asihpi *card = snd_pcm_substream_chip(substream);
 	int err;
 	u16 format;
+	int width;
 	unsigned int bytes_per_sec;
 
 	print_hwparams(params);
@@ -512,9 +513,10 @@ static int snd_card_asihpi_pcm_hw_params(struct snd_pcm_substream *substream,
 				dpcm->hpi_buffer_attached);
 	}
 	bytes_per_sec = params_rate(params) * params_channels(params);
-	bytes_per_sec *= snd_pcm_format_width(params_format(params));
+	width = snd_pcm_format_width(params_format(params));
+	bytes_per_sec *= width;
 	bytes_per_sec /= 8;
-	if (bytes_per_sec <= 0)
+	if (width < 0 || bytes_per_sec == 0)
 		return -EINVAL;
 
 	dpcm->bytes_per_sec = bytes_per_sec;
@@ -1383,7 +1385,7 @@ static char *asihpi_src_names[] =
 
 compile_time_assert(
 	(ARRAY_SIZE(asihpi_src_names) ==
-		(HPI_SOURCENODE_LAST_INDEX-HPI_SOURCENODE_BASE+1)),
+		(HPI_SOURCENODE_LAST_INDEX-HPI_SOURCENODE_NONE+1)),
 	assert_src_names_size);
 
 #if ASI_STYLE_NAMES
@@ -1414,7 +1416,7 @@ static char *asihpi_dst_names[] =
 
 compile_time_assert(
 	(ARRAY_SIZE(asihpi_dst_names) ==
-		(HPI_DESTNODE_LAST_INDEX-HPI_DESTNODE_BASE+1)),
+		(HPI_DESTNODE_LAST_INDEX-HPI_DESTNODE_NONE+1)),
 	assert_dst_names_size);
 
 static inline int ctl_add(struct snd_card *card, struct snd_kcontrol_new *ctl,
@@ -2171,7 +2173,7 @@ static int snd_asihpi_mux_info(struct snd_kcontrol *kcontrol,
 					&src_node_type, &src_node_index);
 
 	sprintf(uinfo->value.enumerated.name, "%s %d",
-		asihpi_src_names[src_node_type - HPI_SOURCENODE_BASE],
+		asihpi_src_names[src_node_type - HPI_SOURCENODE_NONE],
 		src_node_index);
 	return 0;
 }
@@ -2603,8 +2605,8 @@ static int __devinit snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
 
 		}
 
-		hpi_ctl.src_node_type -= HPI_SOURCENODE_BASE;
-		hpi_ctl.dst_node_type -= HPI_DESTNODE_BASE;
+		hpi_ctl.src_node_type -= HPI_SOURCENODE_NONE;
+		hpi_ctl.dst_node_type -= HPI_DESTNODE_NONE;
 
 		/* ASI50xx in SSX mode has multiple meters on the same node.
 		   Use subindex to create distinct ALSA controls
diff --git a/sound/pci/asihpi/hpi.h b/sound/pci/asihpi/hpi.h
index 0173bbe62b6..23399d02f66 100644
--- a/sound/pci/asihpi/hpi.h
+++ b/sound/pci/asihpi/hpi.h
@@ -50,7 +50,8 @@ i.e 3.05.02 is a development version
 #define HPI_VER_RELEASE(v) ((int)(v & 0xFF))
 
 /* Use single digits for versions less that 10 to avoid octal. */
-#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 3, 25)
+#define HPI_VER HPI_VERSION_CONSTRUCTOR(4L, 4, 1)
+#define HPI_VER_STRING "4.04.01"
 
 /* Library version as documented in hpi-api-versions.txt */
 #define HPI_LIB_VER  HPI_VERSION_CONSTRUCTOR(9, 0, 0)
@@ -203,8 +204,6 @@ enum HPI_SOURCENODES {
 	exists on a destination node can be searched for using a source
 	node value of either 0, or HPI_SOURCENODE_NONE */
 	HPI_SOURCENODE_NONE = 100,
-	/** \deprecated Use HPI_SOURCENODE_NONE instead. */
-	HPI_SOURCENODE_BASE = 100,
 	/** Out Stream (Play) node. */
 	HPI_SOURCENODE_OSTREAM = 101,
 	/** Line in node - could be analog, AES/EBU or network. */
@@ -235,8 +234,6 @@ enum HPI_DESTNODES {
 	exists on a source node can be searched for using a destination
 	node value of either 0, or HPI_DESTNODE_NONE */
 	HPI_DESTNODE_NONE = 200,
-	/** \deprecated Use HPI_DESTNODE_NONE instead. */
-	HPI_DESTNODE_BASE = 200,
 	/** In Stream (Record) node. */
 	HPI_DESTNODE_ISTREAM = 201,
 	HPI_DESTNODE_LINEOUT = 202,	    /**< line out node. */
@@ -432,7 +429,18 @@ Property 2 - adapter can do stream grouping (supports SSX2)
 Property 1 - adapter can do samplerate conversion (MRX)
 Property 2 - adapter can do timestretch (TSX)
 */
-	HPI_ADAPTER_PROPERTY_CAPS2 = 269
+	HPI_ADAPTER_PROPERTY_CAPS2 = 269,
+
+/** Readonly adapter sync header connection count.
+*/
+	HPI_ADAPTER_PROPERTY_SYNC_HEADER_CONNECTIONS = 270,
+/** Readonly supports SSX2 property.
+Indicates the adapter supports SSX2 in some mode setting. The
+return value is true (1) or false (0). If the current adapter
+mode is MONO SSX2 is disabled, even though this property will
+return true.
+*/
+	HPI_ADAPTER_PROPERTY_SUPPORTS_SSX2 = 271
 };
 
 /** Adapter mode commands
@@ -813,8 +821,6 @@ enum HPI_SAMPLECLOCK_SOURCES {
 /** The sampleclock output is derived from its local samplerate generator.
     The local samplerate may be set using HPI_SampleClock_SetLocalRate(). */
 	HPI_SAMPLECLOCK_SOURCE_LOCAL = 1,
-/** \deprecated Use HPI_SAMPLECLOCK_SOURCE_LOCAL instead */
-	HPI_SAMPLECLOCK_SOURCE_ADAPTER = 1,
 /** The adapter is clocked from a dedicated AES/EBU SampleClock input.*/
 	HPI_SAMPLECLOCK_SOURCE_AESEBU_SYNC = 2,
 /** From external wordclock connector */
@@ -825,10 +831,6 @@ enum HPI_SAMPLECLOCK_SOURCES {
 	HPI_SAMPLECLOCK_SOURCE_SMPTE = 5,
 /** One of the aesebu inputs */
 	HPI_SAMPLECLOCK_SOURCE_AESEBU_INPUT = 6,
-/** \deprecated The first aesebu input with a valid signal
-Superseded by separate Auto enable flag
-*/
-	HPI_SAMPLECLOCK_SOURCE_AESEBU_AUTO = 7,
 /** From a network interface e.g. Cobranet or Livewire at either 48 or 96kHz */
 	HPI_SAMPLECLOCK_SOURCE_NETWORK = 8,
 /** From previous adjacent module (ASI2416 only)*/
@@ -1015,8 +1017,6 @@ enum HPI_ERROR_CODES {
 	HPI_ERROR_CONTROL_DISABLED = 404,
 	/** I2C transaction failed due to a missing ACK. */
 	HPI_ERROR_CONTROL_I2C_MISSING_ACK = 405,
-	/** Control attribute is valid, but not supported by this hardware. */
-	HPI_ERROR_UNSUPPORTED_CONTROL_ATTRIBUTE = 406,
 	/** Control is busy, or coming out of
 	reset and cannot be accessed at this time. */
 	HPI_ERROR_CONTROL_NOT_READY = 407,
@@ -1827,13 +1827,41 @@ u16 hpi_parametricEQ__get_coeffs(const struct hpi_hsubsys *ph_subsys,
   Compressor Expander control
 *******************************/
 
-u16 hpi_compander_set(const struct hpi_hsubsys *ph_subsys, u32 h_control,
-	u16 attack, u16 decay, short ratio100, short threshold0_01dB,
-	short makeup_gain0_01dB);
+u16 hpi_compander_set_enable(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 on);
+
+u16 hpi_compander_get_enable(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 *pon);
+
+u16 hpi_compander_set_makeup_gain(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, short makeup_gain0_01dB);
+
+u16 hpi_compander_get_makeup_gain(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, short *pn_makeup_gain0_01dB);
+
+u16 hpi_compander_set_attack_time_constant(const struct hpi_hsubsys
+	*ph_subsys, u32 h_control, u32 index, u32 attack);
+
+u16 hpi_compander_get_attack_time_constant(const struct hpi_hsubsys
+	*ph_subsys, u32 h_control, u32 index, u32 *pw_attack);
+
+u16 hpi_compander_set_decay_time_constant(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 decay);
+
+u16 hpi_compander_get_decay_time_constant(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 *pw_decay);
+
+u16 hpi_compander_set_threshold(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, short threshold0_01dB);
+
+u16 hpi_compander_get_threshold(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, short *pn_threshold0_01dB);
+
+u16 hpi_compander_set_ratio(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 ratio100);
 
-u16 hpi_compander_get(const struct hpi_hsubsys *ph_subsys, u32 h_control,
-	u16 *pw_attack, u16 *pw_decay, short *pw_ratio100,
-	short *pn_threshold0_01dB, short *pn_makeup_gain0_01dB);
+u16 hpi_compander_get_ratio(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 *pw_ratio100);
 
 /*******************************
   Cobranet HMI control
diff --git a/sound/pci/asihpi/hpi6000.c b/sound/pci/asihpi/hpi6000.c
index 12dab5e4892..f7e374ec441 100644
--- a/sound/pci/asihpi/hpi6000.c
+++ b/sound/pci/asihpi/hpi6000.c
@@ -687,6 +687,7 @@ static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
 	switch (pao->pci.subsys_device_id) {
 	case 0x5100:
 	case 0x5110:	/* ASI5100 revB or higher with C6711D */
+	case 0x5200:	/* ASI5200 PC_ie version of ASI5100 */
 	case 0x6100:
 	case 0x6200:
 		boot_load_family = HPI_ADAPTER_FAMILY_ASI(0x6200);
@@ -1133,6 +1134,12 @@ static short hpi6000_adapter_boot_load_dsp(struct hpi_adapter_obj *pao,
 						subsys_device_id) ==
 					HPI_ADAPTER_FAMILY_ASI(0x5100))
 					mask = 0x00000000L;
+				/* ASI5200 uses AX6 code, */
+				/* but has no PLD r/w register to test */
+				if (HPI_ADAPTER_FAMILY_ASI(pao->pci.
+						subsys_device_id) ==
+					HPI_ADAPTER_FAMILY_ASI(0x5200))
+					mask = 0x00000000L;
 				break;
 			case HPI_ADAPTER_FAMILY_ASI(0x8800):
 				/* ASI8800 has 16bit path to FPGA */
diff --git a/sound/pci/asihpi/hpi_internal.h b/sound/pci/asihpi/hpi_internal.h
index fdd0ce02aa6..16f502d459d 100644
--- a/sound/pci/asihpi/hpi_internal.h
+++ b/sound/pci/asihpi/hpi_internal.h
@@ -104,9 +104,9 @@ typedef void hpi_handler_func(struct hpi_message *, struct hpi_response *);
 #define STR_ROLE_FIELD_MAX 255U
 
 struct hpi_entity_str {
-	uint16_t size;
-	uint8_t type;
-	uint8_t role;
+	u16 size;
+	u8 type;
+	u8 role;
 };
 
 #if defined(_MSC_VER)
@@ -119,11 +119,11 @@ struct hpi_entity {
 #if ! defined(HPI_OS_DSP_C6000) || (defined(HPI_OS_DSP_C6000) && (__TI_COMPILER_VERSION__ > 6000008))
 	/* DSP C6000 compiler v6.0.8 and lower
 	   do not support  flexible array member */
-	uint8_t value[];
+	u8 value[];
 #else
 	/* NOTE! Using sizeof(struct hpi_entity) will give erroneous results */
 #define HPI_INTERNAL_WARN_ABOUT_ENTITY_VALUE
-	uint8_t value[1];
+	u8 value[1];
 #endif
 };
 
@@ -142,12 +142,15 @@ enum HPI_BUSES {
 /******************************************* CONTROL ATTRIBUTES ****/
 /* (in order of control type ID */
 
-	/* This allows for 255 control types, 256 unique attributes each */
+/* This allows for 255 control types, 256 unique attributes each */
 #define HPI_CTL_ATTR(ctl, ai) (HPI_CONTROL_##ctl * 0x100 + ai)
 
 /* Get the sub-index of the attribute for a control type */
 #define HPI_CTL_ATTR_INDEX(i) (i&0xff)
 
+/* Extract the control from the control attribute */
+#define HPI_CTL_ATTR_CONTROL(i) (i>>8)
+
 /* Generic control attributes.  */
 
 /** Enable a control.
@@ -311,8 +314,7 @@ Used for HPI_ChannelModeSet/Get()
 /* Microphone control attributes */
 #define HPI_MICROPHONE_PHANTOM_POWER HPI_CTL_ATTR(MICROPHONE, 1)
 
-/** Equalizer control attributes
-*/
+/** Equalizer control attributes */
 /** Used to get number of filters in an EQ. (Can't set) */
 #define HPI_EQUALIZER_NUM_FILTERS HPI_CTL_ATTR(EQUALIZER, 1)
 /** Set/get the filter by type, freq, Q, gain */
@@ -320,13 +322,15 @@ Used for HPI_ChannelModeSet/Get()
 /** Get the biquad coefficients */
 #define HPI_EQUALIZER_COEFFICIENTS HPI_CTL_ATTR(EQUALIZER, 3)
 
-#define HPI_COMPANDER_PARAMS HPI_CTL_ATTR(COMPANDER, 1)
+/* Note compander also uses HPI_GENERIC_ENABLE */
+#define HPI_COMPANDER_PARAMS     HPI_CTL_ATTR(COMPANDER, 1)
+#define HPI_COMPANDER_MAKEUPGAIN HPI_CTL_ATTR(COMPANDER, 2)
+#define HPI_COMPANDER_THRESHOLD  HPI_CTL_ATTR(COMPANDER, 3)
+#define HPI_COMPANDER_RATIO      HPI_CTL_ATTR(COMPANDER, 4)
+#define HPI_COMPANDER_ATTACK     HPI_CTL_ATTR(COMPANDER, 5)
+#define HPI_COMPANDER_DECAY      HPI_CTL_ATTR(COMPANDER, 6)
 
-/* Cobranet control attributes.
-   MUST be distinct from all other control attributes.
-   This is so that host side processing can easily identify a Cobranet control
-   and apply additional host side operations (like copying data) as required.
-*/
+/* Cobranet control attributes. */
 #define HPI_COBRANET_SET         HPI_CTL_ATTR(COBRANET, 1)
 #define HPI_COBRANET_GET         HPI_CTL_ATTR(COBRANET, 2)
 #define HPI_COBRANET_SET_DATA    HPI_CTL_ATTR(COBRANET, 3)
@@ -1512,11 +1516,11 @@ struct hpi_control_cache_single {
 	struct hpi_control_cache_info i;
 	union {
 		struct {	/* volume */
-			u16 an_log[2];
+			short an_log[2];
 		} v;
 		struct {	/* peak meter */
-			u16 an_log_peak[2];
-			u16 an_logRMS[2];
+			short an_log_peak[2];
+			short an_logRMS[2];
 		} p;
 		struct {	/* channel mode */
 			u16 mode;
@@ -1526,7 +1530,7 @@ struct hpi_control_cache_single {
 			u16 source_node_index;
 		} x;
 		struct {	/* level/trim */
-			u16 an_log[2];
+			short an_log[2];
 		} l;
 		struct {	/* tuner - partial caching.
 				   some attributes go to the DSP. */
diff --git a/sound/pci/asihpi/hpicmn.c b/sound/pci/asihpi/hpicmn.c
index fcd64539d9e..dda4f1c6f65 100644
--- a/sound/pci/asihpi/hpicmn.c
+++ b/sound/pci/asihpi/hpicmn.c
@@ -353,7 +353,12 @@ short hpi_check_control_cache(struct hpi_control_cache *p_cache,
 			phr->u.c.param1 = pC->u.t.band;
 		else if ((phm->u.c.attribute == HPI_TUNER_LEVEL)
 			&& (phm->u.c.param1 == HPI_TUNER_LEVEL_AVERAGE))
-			phr->u.c.param1 = pC->u.t.level;
+			if (pC->u.t.level == HPI_ERROR_ILLEGAL_CACHE_VALUE) {
+				phr->u.c.param1 = 0;
+				phr->error =
+					HPI_ERROR_INVALID_CONTROL_ATTRIBUTE;
+			} else
+				phr->u.c.param1 = pC->u.t.level;
 		else
 			found = 0;
 		break;
@@ -397,7 +402,8 @@ short hpi_check_control_cache(struct hpi_control_cache *p_cache,
 			if (pC->u.clk.source_index ==
 				HPI_ERROR_ILLEGAL_CACHE_VALUE) {
 				phr->u.c.param1 = 0;
-				phr->error = HPI_ERROR_INVALID_OPERATION;
+				phr->error =
+					HPI_ERROR_INVALID_CONTROL_ATTRIBUTE;
 			} else
 				phr->u.c.param1 = pC->u.clk.source_index;
 		} else if (phm->u.c.attribute == HPI_SAMPLECLOCK_SAMPLERATE)
diff --git a/sound/pci/asihpi/hpidebug.c b/sound/pci/asihpi/hpidebug.c
index 4cd85a401b3..949836ec913 100644
--- a/sound/pci/asihpi/hpidebug.c
+++ b/sound/pci/asihpi/hpidebug.c
@@ -111,7 +111,7 @@ make_treenode_from_array(hpi_control_type_strings, HPI_CONTROL_TYPE_STRINGS)
   &hpi_profile_strings,\
   &hpi_control_strings, \
   &hpi_asyncevent_strings \
-};
+}
 	make_treenode_from_array(hpi_function_strings, HPI_FUNCTION_STRINGS)
 
 	compile_time_assert(HPI_OBJ_MAXINDEX == 14, obj_list_doesnt_match);
diff --git a/sound/pci/asihpi/hpidebug.h b/sound/pci/asihpi/hpidebug.h
index 44dccadcc25..a2f0952a99f 100644
--- a/sound/pci/asihpi/hpidebug.h
+++ b/sound/pci/asihpi/hpidebug.h
@@ -356,7 +356,7 @@ compile_time_assert((HPI_CONTROL_LAST_INDEX + 1 == 27),
 	"HPI_SOURCENODE_ADAPTER" \
 }
 
-compile_time_assert((HPI_SOURCENODE_LAST_INDEX - HPI_SOURCENODE_BASE + 1) ==
+compile_time_assert((HPI_SOURCENODE_LAST_INDEX - HPI_SOURCENODE_NONE + 1) ==
 	(12), sourcenode_strings_match_defs);
 
 #define HPI_DESTNODE_STRINGS \
@@ -370,7 +370,7 @@ compile_time_assert((HPI_SOURCENODE_LAST_INDEX - HPI_SOURCENODE_BASE + 1) ==
 	"HPI_DESTNODE_COBRANET", \
 	"HPI_DESTNODE_ANALOG" \
 }
-compile_time_assert((HPI_DESTNODE_LAST_INDEX - HPI_DESTNODE_BASE + 1) == (8),
+compile_time_assert((HPI_DESTNODE_LAST_INDEX - HPI_DESTNODE_NONE + 1) == (8),
 	destnode_strings_match_defs);
 
 #define HPI_CONTROL_CHANNEL_MODE_STRINGS \
diff --git a/sound/pci/asihpi/hpifunc.c b/sound/pci/asihpi/hpifunc.c
index 298eef3e20e..1e92eb6dd50 100644
--- a/sound/pci/asihpi/hpifunc.c
+++ b/sound/pci/asihpi/hpifunc.c
@@ -96,8 +96,7 @@ void hpi_stream_response_to_legacy(struct hpi_stream_res *pSR)
 
 static struct hpi_hsubsys gh_subsys;
 
-struct hpi_hsubsys *hpi_subsys_create(void
-	)
+struct hpi_hsubsys *hpi_subsys_create(void)
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
@@ -302,6 +301,7 @@ u16 hpi_adapter_set_mode_ex(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER,
 		HPI_ADAPTER_SET_MODE);
 	hm.adapter_index = adapter_index;
@@ -510,7 +510,7 @@ u16 hpi_adapter_debug_read(const struct hpi_hsubsys *ph_subsys,
 	hm.adapter_index = adapter_index;
 	hm.u.ax.debug_read.dsp_address = dsp_address;
 
-	if (*count_bytes > sizeof(hr.u.bytes))
+	if (*count_bytes > (int)sizeof(hr.u.bytes))
 		*count_bytes = sizeof(hr.u.bytes);
 
 	hm.u.ax.debug_read.count_bytes = *count_bytes;
@@ -976,6 +976,7 @@ u16 hpi_outstream_ancillary_read(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_OSTREAM,
 		HPI_OSTREAM_ANC_READ);
 	u32TOINDEXES(h_outstream, &hm.adapter_index, &hm.obj_index);
@@ -1581,6 +1582,7 @@ u16 hpi_control_param_set(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_SET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -1591,6 +1593,22 @@ u16 hpi_control_param_set(const struct hpi_hsubsys *ph_subsys,
 	return hr.error;
 }
 
+static u16 hpi_control_log_set2(u32 h_control, u16 attrib, short sv0,
+	short sv1)
+{
+	struct hpi_message hm;
+	struct hpi_response hr;
+
+	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
+		HPI_CONTROL_SET_STATE);
+	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
+	hm.u.c.attribute = attrib;
+	hm.u.c.an_log_value[0] = sv0;
+	hm.u.c.an_log_value[1] = sv1;
+	hpi_send_recv(&hm, &hr);
+	return hr.error;
+}
+
 static
 u16 hpi_control_param_get(const struct hpi_hsubsys *ph_subsys,
 	const u32 h_control, const u16 attrib, u32 param1, u32 param2,
@@ -1598,6 +1616,7 @@ u16 hpi_control_param_get(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -1605,8 +1624,8 @@ u16 hpi_control_param_get(const struct hpi_hsubsys *ph_subsys,
 	hm.u.c.param1 = param1;
 	hm.u.c.param2 = param2;
 	hpi_send_recv(&hm, &hr);
-	if (pparam1)
-		*pparam1 = hr.u.c.param1;
+
+	*pparam1 = hr.u.c.param1;
 	if (pparam2)
 		*pparam2 = hr.u.c.param2;
 
@@ -1617,10 +1636,23 @@ u16 hpi_control_param_get(const struct hpi_hsubsys *ph_subsys,
 		hpi_control_param_get(s, h, a, 0, 0, p1, NULL)
 #define hpi_control_param2_get(s, h, a, p1, p2) \
 		hpi_control_param_get(s, h, a, 0, 0, p1, p2)
-#define hpi_control_ex_param1_get(s, h, a, p1) \
-		hpi_control_ex_param_get(s, h, a, 0, 0, p1, NULL)
-#define hpi_control_ex_param2_get(s, h, a, p1, p2) \
-		hpi_control_ex_param_get(s, h, a, 0, 0, p1, p2)
+
+static u16 hpi_control_log_get2(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u16 attrib, short *sv0, short *sv1)
+{
+	struct hpi_message hm;
+	struct hpi_response hr;
+	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
+		HPI_CONTROL_GET_STATE);
+	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
+	hm.u.c.attribute = attrib;
+
+	hpi_send_recv(&hm, &hr);
+	*sv0 = hr.u.c.an_log_value[0];
+	if (sv1)
+		*sv1 = hr.u.c.an_log_value[1];
+	return hr.error;
+}
 
 static
 u16 hpi_control_query(const struct hpi_hsubsys *ph_subsys,
@@ -1629,6 +1661,7 @@ u16 hpi_control_query(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_INFO);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -1643,9 +1676,8 @@ u16 hpi_control_query(const struct hpi_hsubsys *ph_subsys,
 	return hr.error;
 }
 
-static u16 hpi_control_get_string(const struct hpi_hsubsys *ph_subsys,
-	const u32 h_control, const u16 attribute, char *psz_string,
-	const u32 string_length)
+static u16 hpi_control_get_string(const u32 h_control, const u16 attribute,
+	char *psz_string, const u32 string_length)
 {
 	unsigned int sub_string_index = 0, j = 0;
 	char c = 0;
@@ -1916,6 +1948,7 @@ u16 hpi_cobranet_hmi_write(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROLEX,
 		HPI_CONTROL_SET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -1941,6 +1974,7 @@ u16 hpi_cobranet_hmi_read(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROLEX,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -1980,6 +2014,7 @@ u16 hpi_cobranet_hmi_get_status(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROLEX,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2006,6 +2041,7 @@ u16 hpi_cobranet_getI_paddress(const struct hpi_hsubsys *ph_subsys,
 	u32 byte_count;
 	u32 iP;
 	u16 error;
+
 	error = hpi_cobranet_hmi_read(ph_subsys, h_control,
 		HPI_COBRANET_HMI_cobra_ip_mon_currentIP, 4, &byte_count,
 		(u8 *)&iP);
@@ -2082,6 +2118,7 @@ u16 hpi_cobranet_getMA_caddress(const struct hpi_hsubsys *ph_subsys,
 	u32 byte_count;
 	u16 error;
 	u32 mAC;
+
 	error = hpi_cobranet_hmi_read(ph_subsys, h_control,
 		HPI_COBRANET_HMI_cobra_if_phy_address, 4, &byte_count,
 		(u8 *)&mAC);
@@ -2103,53 +2140,111 @@ u16 hpi_cobranet_getMA_caddress(const struct hpi_hsubsys *ph_subsys,
 	return error;
 }
 
-u16 hpi_compander_set(const struct hpi_hsubsys *ph_subsys, u32 h_control,
-	u16 attack, u16 decay, short ratio100, short threshold0_01dB,
-	short makeup_gain0_01dB)
+u16 hpi_compander_set_enable(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 enable)
+{
+	return hpi_control_param_set(ph_subsys, h_control, HPI_GENERIC_ENABLE,
+		enable, 0);
+}
+
+u16 hpi_compander_get_enable(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 *enable)
+{
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_GENERIC_ENABLE, enable);
+}
+
+u16 hpi_compander_set_makeup_gain(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, short makeup_gain0_01dB)
+{
+	return hpi_control_log_set2(h_control, HPI_COMPANDER_MAKEUPGAIN,
+		makeup_gain0_01dB, 0);
+}
+
+u16 hpi_compander_get_makeup_gain(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, short *makeup_gain0_01dB)
+{
+	return hpi_control_log_get2(ph_subsys, h_control,
+		HPI_COMPANDER_MAKEUPGAIN, makeup_gain0_01dB, NULL);
+}
+
+u16 hpi_compander_set_attack_time_constant(const struct hpi_hsubsys
+	*ph_subsys, u32 h_control, unsigned int index, u32 attack)
+{
+	return hpi_control_param_set(ph_subsys, h_control,
+		HPI_COMPANDER_ATTACK, attack, index);
+}
+
+u16 hpi_compander_get_attack_time_constant(const struct hpi_hsubsys
+	*ph_subsys, u32 h_control, unsigned int index, u32 *attack)
+{
+	return hpi_control_param_get(ph_subsys, h_control,
+		HPI_COMPANDER_ATTACK, 0, index, attack, NULL);
+}
+
+u16 hpi_compander_set_decay_time_constant(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, unsigned int index, u32 decay)
+{
+	return hpi_control_param_set(ph_subsys, h_control,
+		HPI_COMPANDER_DECAY, decay, index);
+}
+
+u16 hpi_compander_get_decay_time_constant(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, unsigned int index, u32 *decay)
+{
+	return hpi_control_param_get(ph_subsys, h_control,
+		HPI_COMPANDER_DECAY, 0, index, decay, NULL);
+
+}
+
+u16 hpi_compander_set_threshold(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, unsigned int index, short threshold0_01dB)
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_SET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-
-	hm.u.c.param1 = attack + ((u32)ratio100 << 16);
-	hm.u.c.param2 = (decay & 0xFFFFL);
+	hm.u.c.attribute = HPI_COMPANDER_THRESHOLD;
+	hm.u.c.param2 = index;
 	hm.u.c.an_log_value[0] = threshold0_01dB;
-	hm.u.c.an_log_value[1] = makeup_gain0_01dB;
-	hm.u.c.attribute = HPI_COMPANDER_PARAMS;
 
 	hpi_send_recv(&hm, &hr);
 
 	return hr.error;
 }
 
-u16 hpi_compander_get(const struct hpi_hsubsys *ph_subsys, u32 h_control,
-	u16 *pw_attack, u16 *pw_decay, short *pw_ratio100,
-	short *pn_threshold0_01dB, short *pn_makeup_gain0_01dB)
+u16 hpi_compander_get_threshold(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, unsigned int index, short *threshold0_01dB)
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-	hm.u.c.attribute = HPI_COMPANDER_PARAMS;
+	hm.u.c.attribute = HPI_COMPANDER_THRESHOLD;
+	hm.u.c.param2 = index;
 
 	hpi_send_recv(&hm, &hr);
+	*threshold0_01dB = hr.u.c.an_log_value[0];
 
-	if (pw_attack)
-		*pw_attack = (short)(hr.u.c.param1 & 0xFFFF);
-	if (pw_decay)
-		*pw_decay = (short)(hr.u.c.param2 & 0xFFFF);
-	if (pw_ratio100)
-		*pw_ratio100 = (short)(hr.u.c.param1 >> 16);
+	return hr.error;
+}
 
-	if (pn_threshold0_01dB)
-		*pn_threshold0_01dB = hr.u.c.an_log_value[0];
-	if (pn_makeup_gain0_01dB)
-		*pn_makeup_gain0_01dB = hr.u.c.an_log_value[1];
+u16 hpi_compander_set_ratio(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 ratio100)
+{
+	return hpi_control_param_set(ph_subsys, h_control,
+		HPI_COMPANDER_RATIO, ratio100, index);
+}
 
-	return hr.error;
+u16 hpi_compander_get_ratio(const struct hpi_hsubsys *ph_subsys,
+	u32 h_control, u32 index, u32 *ratio100)
+{
+	return hpi_control_param_get(ph_subsys, h_control,
+		HPI_COMPANDER_RATIO, 0, index, ratio100, NULL);
 }
 
 u16 hpi_level_query_range(const struct hpi_hsubsys *ph_subsys, u32 h_control,
@@ -2157,6 +2252,7 @@ u16 hpi_level_query_range(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2181,37 +2277,16 @@ u16 hpi_level_set_gain(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	short an_gain0_01dB[HPI_MAX_CHANNELS]
 	)
 {
-	struct hpi_message hm;
-	struct hpi_response hr;
-
-	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
-		HPI_CONTROL_SET_STATE);
-	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-	memcpy(hm.u.c.an_log_value, an_gain0_01dB,
-		sizeof(short) * HPI_MAX_CHANNELS);
-	hm.u.c.attribute = HPI_LEVEL_GAIN;
-
-	hpi_send_recv(&hm, &hr);
-
-	return hr.error;
+	return hpi_control_log_set2(h_control, HPI_LEVEL_GAIN,
+		an_gain0_01dB[0], an_gain0_01dB[1]);
 }
 
 u16 hpi_level_get_gain(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	short an_gain0_01dB[HPI_MAX_CHANNELS]
 	)
 {
-	struct hpi_message hm;
-	struct hpi_response hr;
-	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
-		HPI_CONTROL_GET_STATE);
-	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-	hm.u.c.attribute = HPI_LEVEL_GAIN;
-
-	hpi_send_recv(&hm, &hr);
-
-	memcpy(an_gain0_01dB, hr.u.c.an_log_value,
-		sizeof(short) * HPI_MAX_CHANNELS);
-	return hr.error;
+	return hpi_control_log_get2(ph_subsys, h_control, HPI_LEVEL_GAIN,
+		&an_gain0_01dB[0], &an_gain0_01dB[1]);
 }
 
 u16 hpi_meter_query_channels(const struct hpi_hsubsys *ph_subsys,
@@ -2413,6 +2488,7 @@ u16 hpi_parametricEQ__get_band(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2439,6 +2515,7 @@ u16 hpi_parametricEQ__set_band(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_SET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2460,6 +2537,7 @@ u16 hpi_parametricEQ__get_coeffs(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2623,8 +2701,8 @@ u16 hpi_tone_detector_get_frequency(const struct hpi_hsubsys *ph_subsys,
 u16 hpi_tone_detector_get_state(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *state)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_TONEDETECTOR_STATE, 0, 0, (u32 *)state, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_TONEDETECTOR_STATE, state);
 }
 
 u16 hpi_tone_detector_set_enable(const struct hpi_hsubsys *ph_subsys,
@@ -2637,8 +2715,8 @@ u16 hpi_tone_detector_set_enable(const struct hpi_hsubsys *ph_subsys,
 u16 hpi_tone_detector_get_enable(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *enable)
 {
-	return hpi_control_param_get(ph_subsys, h_control, HPI_GENERIC_ENABLE,
-		0, 0, (u32 *)enable, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_GENERIC_ENABLE, enable);
 }
 
 u16 hpi_tone_detector_set_event_enable(const struct hpi_hsubsys *ph_subsys,
@@ -2651,8 +2729,8 @@ u16 hpi_tone_detector_set_event_enable(const struct hpi_hsubsys *ph_subsys,
 u16 hpi_tone_detector_get_event_enable(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *event_enable)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_GENERIC_EVENT_ENABLE, 0, 0, (u32 *)event_enable, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_GENERIC_EVENT_ENABLE, event_enable);
 }
 
 u16 hpi_tone_detector_set_threshold(const struct hpi_hsubsys *ph_subsys,
@@ -2665,15 +2743,15 @@ u16 hpi_tone_detector_set_threshold(const struct hpi_hsubsys *ph_subsys,
 u16 hpi_tone_detector_get_threshold(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, int *threshold)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_TONEDETECTOR_THRESHOLD, 0, 0, (u32 *)threshold, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_TONEDETECTOR_THRESHOLD, (u32 *)threshold);
 }
 
 u16 hpi_silence_detector_get_state(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *state)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_SILENCEDETECTOR_STATE, 0, 0, (u32 *)state, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_SILENCEDETECTOR_STATE, state);
 }
 
 u16 hpi_silence_detector_set_enable(const struct hpi_hsubsys *ph_subsys,
@@ -2686,50 +2764,50 @@ u16 hpi_silence_detector_set_enable(const struct hpi_hsubsys *ph_subsys,
 u16 hpi_silence_detector_get_enable(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *enable)
 {
-	return hpi_control_param_get(ph_subsys, h_control, HPI_GENERIC_ENABLE,
-		0, 0, (u32 *)enable, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_GENERIC_ENABLE, enable);
 }
 
 u16 hpi_silence_detector_set_event_enable(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 event_enable)
 {
 	return hpi_control_param_set(ph_subsys, h_control,
-		HPI_GENERIC_EVENT_ENABLE, (u32)event_enable, 0);
+		HPI_GENERIC_EVENT_ENABLE, event_enable, 0);
 }
 
 u16 hpi_silence_detector_get_event_enable(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *event_enable)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_GENERIC_EVENT_ENABLE, 0, 0, (u32 *)event_enable, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_GENERIC_EVENT_ENABLE, event_enable);
 }
 
 u16 hpi_silence_detector_set_delay(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 delay)
 {
 	return hpi_control_param_set(ph_subsys, h_control,
-		HPI_SILENCEDETECTOR_DELAY, (u32)delay, 0);
+		HPI_SILENCEDETECTOR_DELAY, delay, 0);
 }
 
 u16 hpi_silence_detector_get_delay(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *delay)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_SILENCEDETECTOR_DELAY, 0, 0, (u32 *)delay, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_SILENCEDETECTOR_DELAY, delay);
 }
 
 u16 hpi_silence_detector_set_threshold(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, int threshold)
 {
 	return hpi_control_param_set(ph_subsys, h_control,
-		HPI_SILENCEDETECTOR_THRESHOLD, (u32)threshold, 0);
+		HPI_SILENCEDETECTOR_THRESHOLD, threshold, 0);
 }
 
 u16 hpi_silence_detector_get_threshold(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, int *threshold)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_SILENCEDETECTOR_THRESHOLD, 0, 0, (u32 *)threshold, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_SILENCEDETECTOR_THRESHOLD, (u32 *)threshold);
 }
 
 u16 hpi_tuner_query_band(const struct hpi_hsubsys *ph_subsys,
@@ -2822,6 +2900,7 @@ u16 hpi_tuner_getRF_level(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2838,6 +2917,7 @@ u16 hpi_tuner_get_rawRF_level(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2894,14 +2974,14 @@ u16 hpi_tuner_get_program(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 u16 hpi_tuner_get_hd_radio_dsp_version(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, char *psz_dsp_version, const u32 string_size)
 {
-	return hpi_control_get_string(ph_subsys, h_control,
+	return hpi_control_get_string(h_control,
 		HPI_TUNER_HDRADIO_DSP_VERSION, psz_dsp_version, string_size);
 }
 
 u16 hpi_tuner_get_hd_radio_sdk_version(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, char *psz_sdk_version, const u32 string_size)
 {
-	return hpi_control_get_string(ph_subsys, h_control,
+	return hpi_control_get_string(h_control,
 		HPI_TUNER_HDRADIO_SDK_VERSION, psz_sdk_version, string_size);
 }
 
@@ -2942,15 +3022,15 @@ u16 hpi_tuner_get_mode(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 u16 hpi_tuner_get_hd_radio_signal_quality(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *pquality)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_TUNER_HDRADIO_SIGNAL_QUALITY, 0, 0, pquality, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_TUNER_HDRADIO_SIGNAL_QUALITY, pquality);
 }
 
 u16 hpi_tuner_get_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *pblend)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_TUNER_HDRADIO_BLEND, 0, 0, pblend, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_TUNER_HDRADIO_BLEND, pblend);
 }
 
 u16 hpi_tuner_set_hd_radio_signal_blend(const struct hpi_hsubsys *ph_subsys,
@@ -2965,6 +3045,7 @@ u16 hpi_tuner_getRDS(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -2981,43 +3062,43 @@ u16 hpi_tuner_getRDS(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 u16 HPI_PAD__get_channel_name(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, char *psz_string, const u32 data_length)
 {
-	return hpi_control_get_string(ph_subsys, h_control,
-		HPI_PAD_CHANNEL_NAME, psz_string, data_length);
+	return hpi_control_get_string(h_control, HPI_PAD_CHANNEL_NAME,
+		psz_string, data_length);
 }
 
 u16 HPI_PAD__get_artist(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	char *psz_string, const u32 data_length)
 {
-	return hpi_control_get_string(ph_subsys, h_control, HPI_PAD_ARTIST,
-		psz_string, data_length);
+	return hpi_control_get_string(h_control, HPI_PAD_ARTIST, psz_string,
+		data_length);
 }
 
 u16 HPI_PAD__get_title(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	char *psz_string, const u32 data_length)
 {
-	return hpi_control_get_string(ph_subsys, h_control, HPI_PAD_TITLE,
-		psz_string, data_length);
+	return hpi_control_get_string(h_control, HPI_PAD_TITLE, psz_string,
+		data_length);
 }
 
 u16 HPI_PAD__get_comment(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	char *psz_string, const u32 data_length)
 {
-	return hpi_control_get_string(ph_subsys, h_control, HPI_PAD_COMMENT,
-		psz_string, data_length);
+	return hpi_control_get_string(h_control, HPI_PAD_COMMENT, psz_string,
+		data_length);
 }
 
 u16 HPI_PAD__get_program_type(const struct hpi_hsubsys *ph_subsys,
 	u32 h_control, u32 *ppTY)
 {
-	return hpi_control_param_get(ph_subsys, h_control,
-		HPI_PAD_PROGRAM_TYPE, 0, 0, ppTY, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_PAD_PROGRAM_TYPE, ppTY);
 }
 
 u16 HPI_PAD__get_rdsPI(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	u32 *ppI)
 {
-	return hpi_control_param_get(ph_subsys, h_control, HPI_PAD_PROGRAM_ID,
-		0, 0, ppI, NULL);
+	return hpi_control_param1_get(ph_subsys, h_control,
+		HPI_PAD_PROGRAM_ID, ppI);
 }
 
 u16 hpi_volume_query_channels(const struct hpi_hsubsys *ph_subsys,
@@ -3031,36 +3112,16 @@ u16 hpi_volume_set_gain(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	short an_log_gain[HPI_MAX_CHANNELS]
 	)
 {
-	struct hpi_message hm;
-	struct hpi_response hr;
-	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
-		HPI_CONTROL_SET_STATE);
-	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-	memcpy(hm.u.c.an_log_value, an_log_gain,
-		sizeof(short) * HPI_MAX_CHANNELS);
-	hm.u.c.attribute = HPI_VOLUME_GAIN;
-
-	hpi_send_recv(&hm, &hr);
-
-	return hr.error;
+	return hpi_control_log_set2(h_control, HPI_VOLUME_GAIN,
+		an_log_gain[0], an_log_gain[1]);
 }
 
 u16 hpi_volume_get_gain(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 	short an_log_gain[HPI_MAX_CHANNELS]
 	)
 {
-	struct hpi_message hm;
-	struct hpi_response hr;
-	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
-		HPI_CONTROL_GET_STATE);
-	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
-	hm.u.c.attribute = HPI_VOLUME_GAIN;
-
-	hpi_send_recv(&hm, &hr);
-
-	memcpy(an_log_gain, hr.u.c.an_log_value,
-		sizeof(short) * HPI_MAX_CHANNELS);
-	return hr.error;
+	return hpi_control_log_get2(ph_subsys, h_control, HPI_VOLUME_GAIN,
+		&an_log_gain[0], &an_log_gain[1]);
 }
 
 u16 hpi_volume_query_range(const struct hpi_hsubsys *ph_subsys, u32 h_control,
@@ -3068,6 +3129,7 @@ u16 hpi_volume_query_range(const struct hpi_hsubsys *ph_subsys, u32 h_control,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_GET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -3094,6 +3156,7 @@ u16 hpi_volume_auto_fade_profile(const struct hpi_hsubsys *ph_subsys,
 {
 	struct hpi_message hm;
 	struct hpi_response hr;
+
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_CONTROL,
 		HPI_CONTROL_SET_STATE);
 	u32TOINDEXES(h_control, &hm.adapter_index, &hm.obj_index);
@@ -3170,43 +3233,42 @@ static size_t entity_type_to_size[LAST_ENTITY_TYPE] = {
 	6 * sizeof(char),
 };
 
-inline size_t hpi_entity_size(struct hpi_entity *entity_ptr)
+static inline size_t hpi_entity_size(struct hpi_entity *entity_ptr)
 {
 	return entity_ptr->header.size;
 }
 
-inline size_t hpi_entity_header_size(struct hpi_entity *entity_ptr)
+static inline size_t hpi_entity_header_size(struct hpi_entity *entity_ptr)
 {
 	return sizeof(entity_ptr->header);
 }
 
-inline size_t hpi_entity_value_size(struct hpi_entity *entity_ptr)
+static inline size_t hpi_entity_value_size(struct hpi_entity *entity_ptr)
 {
 	return hpi_entity_size(entity_ptr) -
 		hpi_entity_header_size(entity_ptr);
 }
 
-inline size_t hpi_entity_item_count(struct hpi_entity *entity_ptr)
+static inline size_t hpi_entity_item_count(struct hpi_entity *entity_ptr)
 {
 	return hpi_entity_value_size(entity_ptr) /
 		entity_type_to_size[entity_ptr->header.type];
 }
 
-inline struct hpi_entity *hpi_entity_ptr_to_next(struct hpi_entity
+static inline struct hpi_entity *hpi_entity_ptr_to_next(struct hpi_entity
 	*entity_ptr)
 {
-	return (void *)(((uint8_t *) entity_ptr) +
-		hpi_entity_size(entity_ptr));
+	return (void *)(((u8 *)entity_ptr) + hpi_entity_size(entity_ptr));
 }
 
-inline u16 hpi_entity_check_type(const enum e_entity_type t)
+static inline u16 hpi_entity_check_type(const enum e_entity_type t)
 {
 	if (t >= 0 && t < STR_TYPE_FIELD_MAX)
 		return 0;
 	return HPI_ERROR_ENTITY_TYPE_INVALID;
 }
 
-inline u16 hpi_entity_check_role(const enum e_entity_role r)
+static inline u16 hpi_entity_check_role(const enum e_entity_role r)
 {
 	if (r >= 0 && r < STR_ROLE_FIELD_MAX)
 		return 0;
@@ -3624,6 +3686,7 @@ u16 hpi_async_event_wait(const struct hpi_hsubsys *ph_subsys, u32 h_async,
 	u16 maximum_events, struct hpi_async_event *p_events,
 	u16 *pw_number_returned)
 {
+
 	return 0;
 }
 
diff --git a/sound/pci/asihpi/hpimsgx.c b/sound/pci/asihpi/hpimsgx.c
index 2ee90dc3d89..f01ab964f60 100644
--- a/sound/pci/asihpi/hpimsgx.c
+++ b/sound/pci/asihpi/hpimsgx.c
@@ -741,7 +741,7 @@ static void HPIMSGX__reset(u16 adapter_index)
 		hpi_init_response(&hr, HPI_OBJ_SUBSYSTEM,
 			HPI_SUBSYS_FIND_ADAPTERS, 0);
 		memcpy(&gRESP_HPI_SUBSYS_FIND_ADAPTERS, &hr,
-			sizeof(&gRESP_HPI_SUBSYS_FIND_ADAPTERS));
+			sizeof(gRESP_HPI_SUBSYS_FIND_ADAPTERS));
 
 		for (adapter = 0; adapter < HPI_MAX_ADAPTERS; adapter++) {
 
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index 7396ac54e99..62895a719fc 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -121,11 +121,17 @@ long asihpi_hpi_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	phpi_ioctl_data = (struct hpi_ioctl_linux __user *)arg;
 
 	/* Read the message and response pointers from user space.  */
-	get_user(puhm, &phpi_ioctl_data->phm);
-	get_user(puhr, &phpi_ioctl_data->phr);
+	if (get_user(puhm, &phpi_ioctl_data->phm) ||
+	    get_user(puhr, &phpi_ioctl_data->phr)) {
+		err = -EFAULT;
+		goto out;
+	}
 
 	/* Now read the message size and data from user space.  */
-	get_user(hm->h.size, (u16 __user *)puhm);
+	if (get_user(hm->h.size, (u16 __user *)puhm)) {
+		err = -EFAULT;
+		goto out;
+	}
 	if (hm->h.size > sizeof(*hm))
 		hm->h.size = sizeof(*hm);
 
@@ -138,7 +144,10 @@ long asihpi_hpi_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		goto out;
 	}
 
-	get_user(res_max_size, (u16 __user *)puhr);
+	if (get_user(res_max_size, (u16 __user *)puhr)) {
+		err = -EFAULT;
+		goto out;
+	}
 	/* printk(KERN_INFO "user response size %d\n", res_max_size); */
 	if (res_max_size < sizeof(struct hpi_response_header)) {
 		HPI_DEBUG_LOG(WARNING, "small res size %d\n", res_max_size);
@@ -464,9 +473,7 @@ void __init asihpi_init(void)
 
 	memset(adapters, 0, sizeof(adapters));
 
-	printk(KERN_INFO "ASIHPI driver %d.%02d.%02d\n",
-		HPI_VER_MAJOR(HPI_VER), HPI_VER_MINOR(HPI_VER),
-		HPI_VER_RELEASE(HPI_VER));
+	printk(KERN_INFO "ASIHPI driver " HPI_VER_STRING "\n");
 
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
 		HPI_SUBSYS_DRIVER_LOAD);
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index 668a5ec0449..20763dd03fa 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -2250,6 +2250,8 @@ static int snd_echo_resume(struct pci_dev *pci)
 	DE_INIT(("resume start\n"));
 	pci_restore_state(pci);
 	commpage_bak = kmalloc(sizeof(struct echoaudio), GFP_KERNEL);
+	if (commpage_bak == NULL)
+		return -ENOMEM;
 	commpage = chip->comm_page;
 	memcpy(commpage_bak, commpage, sizeof(struct comm_page));
 
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index ba2098d20cc..a7802b99436 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -396,15 +396,18 @@ int snd_hda_get_connections(struct hda_codec *codec, hda_nid_t nid,
 			}
 			for (n = prev_nid + 1; n <= val; n++) {
 				if (conns >= max_conns) {
-					snd_printk(KERN_ERR
-						   "Too many connections\n");
+					snd_printk(KERN_ERR "hda_codec: "
+						   "Too many connections %d for NID 0x%x\n",
+						   conns, nid);
 					return -EINVAL;
 				}
 				conn_list[conns++] = n;
 			}
 		} else {
 			if (conns >= max_conns) {
-				snd_printk(KERN_ERR "Too many connections\n");
+				snd_printk(KERN_ERR "hda_codec: "
+					   "Too many connections %d for NID 0x%x\n",
+					   conns, nid);
 				return -EINVAL;
 			}
 			conn_list[conns++] = val;
@@ -730,15 +733,17 @@ static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
 	total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
 	for (i = 0; i < total_nodes; i++, nid++) {
 		function_id = snd_hda_param_read(codec, nid,
-						AC_PAR_FUNCTION_TYPE) & 0xff;
-		switch (function_id) {
+						AC_PAR_FUNCTION_TYPE);
+		switch (function_id & 0xff) {
 		case AC_GRP_AUDIO_FUNCTION:
 			codec->afg = nid;
-			codec->function_id = function_id;
+			codec->afg_function_id = function_id & 0xff;
+			codec->afg_unsol = (function_id >> 8) & 1;
 			break;
 		case AC_GRP_MODEM_FUNCTION:
 			codec->mfg = nid;
-			codec->function_id = function_id;
+			codec->mfg_function_id = function_id & 0xff;
+			codec->mfg_unsol = (function_id >> 8) & 1;
 			break;
 		default:
 			break;
@@ -1565,6 +1570,17 @@ void snd_hda_codec_resume_amp(struct hda_codec *codec)
 EXPORT_SYMBOL_HDA(snd_hda_codec_resume_amp);
 #endif /* SND_HDA_NEEDS_RESUME */
 
+static u32 get_amp_max_value(struct hda_codec *codec, hda_nid_t nid, int dir,
+			     unsigned int ofs)
+{
+	u32 caps = query_amp_caps(codec, nid, dir);
+	/* get num steps */
+	caps = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT;
+	if (ofs < caps)
+		caps -= ofs;
+	return caps;
+}
+
 /**
  * snd_hda_mixer_amp_volume_info - Info callback for a standard AMP mixer
  *
@@ -1579,23 +1595,17 @@ int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol,
 	u8 chs = get_amp_channels(kcontrol);
 	int dir = get_amp_direction(kcontrol);
 	unsigned int ofs = get_amp_offset(kcontrol);
-	u32 caps;
 
-	caps = query_amp_caps(codec, nid, dir);
-	/* num steps */
-	caps = (caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT;
-	if (!caps) {
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = chs == 3 ? 2 : 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = get_amp_max_value(codec, nid, dir, ofs);
+	if (!uinfo->value.integer.max) {
 		printk(KERN_WARNING "hda_codec: "
 		       "num_steps = 0 for NID=0x%x (ctl = %s)\n", nid,
 		       kcontrol->id.name);
 		return -EINVAL;
 	}
-	if (ofs < caps)
-		caps -= ofs;
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-	uinfo->count = chs == 3 ? 2 : 1;
-	uinfo->value.integer.min = 0;
-	uinfo->value.integer.max = caps;
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_info);
@@ -1620,8 +1630,14 @@ update_amp_value(struct hda_codec *codec, hda_nid_t nid,
 		 int ch, int dir, int idx, unsigned int ofs,
 		 unsigned int val)
 {
+	unsigned int maxval;
+
 	if (val > 0)
 		val += ofs;
+	/* ofs = 0: raw max value */
+	maxval = get_amp_max_value(codec, nid, dir, 0);
+	if (val > maxval)
+		val = maxval;
 	return snd_hda_codec_amp_update(codec, nid, ch, dir, idx,
 					HDA_AMP_VOLMASK, val);
 }
@@ -2999,26 +3015,31 @@ struct hda_rate_tbl {
 	unsigned int hda_fmt;
 };
 
+/* rate = base * mult / div */
+#define HDA_RATE(base, mult, div) \
+	(AC_FMT_BASE_##base##K | (((mult) - 1) << AC_FMT_MULT_SHIFT) | \
+	 (((div) - 1) << AC_FMT_DIV_SHIFT))
+
 static struct hda_rate_tbl rate_bits[] = {
 	/* rate in Hz, ALSA rate bitmask, HDA format value */
 
 	/* autodetected value used in snd_hda_query_supported_pcm */
-	{ 8000, SNDRV_PCM_RATE_8000, 0x0500 }, /* 1/6 x 48 */
-	{ 11025, SNDRV_PCM_RATE_11025, 0x4300 }, /* 1/4 x 44 */
-	{ 16000, SNDRV_PCM_RATE_16000, 0x0200 }, /* 1/3 x 48 */
-	{ 22050, SNDRV_PCM_RATE_22050, 0x4100 }, /* 1/2 x 44 */
-	{ 32000, SNDRV_PCM_RATE_32000, 0x0a00 }, /* 2/3 x 48 */
-	{ 44100, SNDRV_PCM_RATE_44100, 0x4000 }, /* 44 */
-	{ 48000, SNDRV_PCM_RATE_48000, 0x0000 }, /* 48 */
-	{ 88200, SNDRV_PCM_RATE_88200, 0x4800 }, /* 2 x 44 */
-	{ 96000, SNDRV_PCM_RATE_96000, 0x0800 }, /* 2 x 48 */
-	{ 176400, SNDRV_PCM_RATE_176400, 0x5800 },/* 4 x 44 */
-	{ 192000, SNDRV_PCM_RATE_192000, 0x1800 }, /* 4 x 48 */
+	{ 8000, SNDRV_PCM_RATE_8000, HDA_RATE(48, 1, 6) },
+	{ 11025, SNDRV_PCM_RATE_11025, HDA_RATE(44, 1, 4) },
+	{ 16000, SNDRV_PCM_RATE_16000, HDA_RATE(48, 1, 3) },
+	{ 22050, SNDRV_PCM_RATE_22050, HDA_RATE(44, 1, 2) },
+	{ 32000, SNDRV_PCM_RATE_32000, HDA_RATE(48, 2, 3) },
+	{ 44100, SNDRV_PCM_RATE_44100, HDA_RATE(44, 1, 1) },
+	{ 48000, SNDRV_PCM_RATE_48000, HDA_RATE(48, 1, 1) },
+	{ 88200, SNDRV_PCM_RATE_88200, HDA_RATE(44, 2, 1) },
+	{ 96000, SNDRV_PCM_RATE_96000, HDA_RATE(48, 2, 1) },
+	{ 176400, SNDRV_PCM_RATE_176400, HDA_RATE(44, 4, 1) },
+	{ 192000, SNDRV_PCM_RATE_192000, HDA_RATE(48, 4, 1) },
 #define AC_PAR_PCM_RATE_BITS	11
 	/* up to bits 10, 384kHZ isn't supported properly */
 
 	/* not autodetected value */
-	{ 9600, SNDRV_PCM_RATE_KNOT, 0x0400 }, /* 1/5 x 48 */
+	{ 9600, SNDRV_PCM_RATE_KNOT, HDA_RATE(48, 1, 5) },
 
 	{ 0 } /* terminator */
 };
@@ -3037,7 +3058,8 @@ static struct hda_rate_tbl rate_bits[] = {
 unsigned int snd_hda_calc_stream_format(unsigned int rate,
 					unsigned int channels,
 					unsigned int format,
-					unsigned int maxbps)
+					unsigned int maxbps,
+					unsigned short spdif_ctls)
 {
 	int i;
 	unsigned int val = 0;
@@ -3060,20 +3082,20 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
 
 	switch (snd_pcm_format_width(format)) {
 	case 8:
-		val |= 0x00;
+		val |= AC_FMT_BITS_8;
 		break;
 	case 16:
-		val |= 0x10;
+		val |= AC_FMT_BITS_16;
 		break;
 	case 20:
 	case 24:
 	case 32:
 		if (maxbps >= 32 || format == SNDRV_PCM_FORMAT_FLOAT_LE)
-			val |= 0x40;
+			val |= AC_FMT_BITS_32;
 		else if (maxbps >= 24)
-			val |= 0x30;
+			val |= AC_FMT_BITS_24;
 		else
-			val |= 0x20;
+			val |= AC_FMT_BITS_20;
 		break;
 	default:
 		snd_printdd("invalid format width %d\n",
@@ -3081,6 +3103,9 @@ unsigned int snd_hda_calc_stream_format(unsigned int rate,
 		return 0;
 	}
 
+	if (spdif_ctls & AC_DIG1_NONAUDIO)
+		val |= AC_FMT_TYPE_NON_PCM;
+
 	return val;
 }
 EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 5991d14e1ec..0328cf55cdb 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -224,6 +224,27 @@ enum {
 /* Input converter SDI select */
 #define AC_SDI_SELECT			(0xf<<0)
 
+/* stream format id */
+#define AC_FMT_CHAN_SHIFT		0
+#define AC_FMT_CHAN_MASK		(0x0f << 0)
+#define AC_FMT_BITS_SHIFT		4
+#define AC_FMT_BITS_MASK		(7 << 4)
+#define AC_FMT_BITS_8			(0 << 4)
+#define AC_FMT_BITS_16			(1 << 4)
+#define AC_FMT_BITS_20			(2 << 4)
+#define AC_FMT_BITS_24			(3 << 4)
+#define AC_FMT_BITS_32			(4 << 4)
+#define AC_FMT_DIV_SHIFT		8
+#define AC_FMT_DIV_MASK			(7 << 8)
+#define AC_FMT_MULT_SHIFT		11
+#define AC_FMT_MULT_MASK		(7 << 11)
+#define AC_FMT_BASE_SHIFT		14
+#define AC_FMT_BASE_48K			(0 << 14)
+#define AC_FMT_BASE_44K			(1 << 14)
+#define AC_FMT_TYPE_SHIFT		15
+#define AC_FMT_TYPE_PCM			(0 << 15)
+#define AC_FMT_TYPE_NON_PCM		(1 << 15)
+
 /* Unsolicited response control */
 #define AC_UNSOL_TAG			(0x3f<<0)
 #define AC_UNSOL_ENABLED		(1<<7)
@@ -364,6 +385,9 @@ enum {
 #define AC_DIG2_CC			(0x7f<<0)
 
 /* Pin widget control - 8bit */
+#define AC_PINCTL_EPT			(0x3<<0)
+#define AC_PINCTL_EPT_NATIVE		0
+#define AC_PINCTL_EPT_HBR		3
 #define AC_PINCTL_VREFEN		(0x7<<0)
 #define AC_PINCTL_VREF_HIZ		0	/* Hi-Z */
 #define AC_PINCTL_VREF_50		1	/* 50% */
@@ -760,7 +784,10 @@ struct hda_codec {
 	hda_nid_t mfg;	/* MFG node id */
 
 	/* ids */
-	u32 function_id;
+	u8 afg_function_id;
+	u8 mfg_function_id;
+	u8 afg_unsol;
+	u8 mfg_unsol;
 	u32 vendor_id;
 	u32 subsystem_id;
 	u32 revision_id;
@@ -928,7 +955,8 @@ void snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid);
 unsigned int snd_hda_calc_stream_format(unsigned int rate,
 					unsigned int channels,
 					unsigned int format,
-					unsigned int maxbps);
+					unsigned int maxbps,
+					unsigned short spdif_ctls);
 int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
 				unsigned int format);
 
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index a1fc83753cc..bf3ced51e0f 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -649,7 +649,9 @@ static void parse_codec_mode(char *buf, struct hda_bus *bus,
 	*codecp = NULL;
 	if (sscanf(buf, "%i %i %i", &vendorid, &subid, &caddr) == 3) {
 		list_for_each_entry(codec, &bus->codec_list, list) {
-			if (codec->addr == caddr) {
+			if (codec->vendor_id == vendorid &&
+			    codec->subsystem_id == subid &&
+			    codec->addr == caddr) {
 				*codecp = codec;
 				break;
 			}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 1df25cf5ce3..66d420212d9 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1653,7 +1653,8 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
 	format_val = snd_hda_calc_stream_format(runtime->rate,
 						runtime->channels,
 						runtime->format,
-						hinfo->maxbps);
+						hinfo->maxbps,
+						apcm->codec->spdif_ctls);
 	if (!format_val) {
 		snd_printk(KERN_ERR SFX
 			   "invalid format_val, rate=%d, ch=%d, format=%d\n",
@@ -1960,7 +1961,7 @@ static void azx_irq_pending_work(struct work_struct *work)
 		spin_unlock_irq(&chip->reg_lock);
 		if (!pending)
 			return;
-		cond_resched();
+		msleep(1);
 	}
 }
 
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index f97d35de66c..f025200f2a6 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -557,7 +557,12 @@ static void print_codec_info(struct snd_info_entry *entry,
 	else
 		snd_iprintf(buffer, "Not Set\n");
 	snd_iprintf(buffer, "Address: %d\n", codec->addr);
-	snd_iprintf(buffer, "Function Id: 0x%x\n", codec->function_id);
+	if (codec->afg)
+		snd_iprintf(buffer, "AFG Function Id: 0x%x (unsol %u)\n",
+			codec->afg_function_id, codec->afg_unsol);
+	if (codec->mfg)
+		snd_iprintf(buffer, "MFG Function Id: 0x%x (unsol %u)\n",
+			codec->mfg_function_id, codec->mfg_unsol);
 	snd_iprintf(buffer, "Vendor Id: 0x%08x\n", codec->vendor_id);
 	snd_iprintf(buffer, "Subsystem Id: 0x%08x\n", codec->subsystem_id);
 	snd_iprintf(buffer, "Revision Id: 0x%x\n", codec->revision_id);
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index afbe314a5bf..b697fd2a6f8 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3662,7 +3662,12 @@ static int patch_ad1984(struct hda_codec *codec)
 		codec->patch_ops.build_pcms = ad1984_build_pcms;
 		break;
 	case AD1984_THINKPAD:
-		spec->multiout.dig_out_nid = AD1884_SPDIF_OUT;
+		if (codec->subsystem_id == 0x17aa20fb) {
+			/* Thinpad X300 does not have the ability to do SPDIF,
+			   or attach to docking station to use SPDIF */
+			spec->multiout.dig_out_nid = 0;
+		} else
+			spec->multiout.dig_out_nid = AD1884_SPDIF_OUT;
 		spec->input_mux = &ad1984_thinkpad_capture_source;
 		spec->mixers[0] = ad1984_thinkpad_mixers;
 		spec->init_verbs[spec->num_init_verbs++] = ad1984_thinkpad_init_verbs;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 2bf2cb5da95..df8b19b1730 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -131,6 +131,8 @@ struct conexant_spec {
 	unsigned int dc_enable;
 	unsigned int dc_input_bias; /* offset into cxt5066_olpc_dc_bias */
 	unsigned int mic_boost; /* offset into cxt5066_analog_mic_boost */
+
+	unsigned int beep_amp;
 };
 
 static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
@@ -515,6 +517,15 @@ static struct snd_kcontrol_new cxt_capture_mixers[] = {
 	{}
 };
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+/* additional beep mixers; the actual parameters are overwritten at build */
+static struct snd_kcontrol_new cxt_beep_mixer[] = {
+	HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT),
+	{ } /* end */
+};
+#endif
+
 static const char *slave_vols[] = {
 	"Headphone Playback Volume",
 	"Speaker Playback Volume",
@@ -580,16 +591,52 @@ static int conexant_build_controls(struct hda_codec *codec)
 			return err;
 	}
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+	/* create beep controls if needed */
+	if (spec->beep_amp) {
+		struct snd_kcontrol_new *knew;
+		for (knew = cxt_beep_mixer; knew->name; knew++) {
+			struct snd_kcontrol *kctl;
+			kctl = snd_ctl_new1(knew, codec);
+			if (!kctl)
+				return -ENOMEM;
+			kctl->private_value = spec->beep_amp;
+			err = snd_hda_ctl_add(codec, 0, kctl);
+			if (err < 0)
+				return err;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static int conexant_suspend(struct hda_codec *codec, pm_message_t state)
+{
+	snd_hda_shutup_pins(codec);
 	return 0;
 }
+#endif
 
 static struct hda_codec_ops conexant_patch_ops = {
 	.build_controls = conexant_build_controls,
 	.build_pcms = conexant_build_pcms,
 	.init = conexant_init,
 	.free = conexant_free,
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	.suspend = conexant_suspend,
+#endif
+	.reboot_notify = snd_hda_shutup_pins,
 };
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+#define set_beep_amp(spec, nid, idx, dir) \
+	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir))
+#else
+#define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#endif
+
 /*
  * EAPD control
  * the private value = nid | (invert << 8)
@@ -1130,9 +1177,10 @@ static int patch_cxt5045(struct hda_codec *codec)
 	spec->num_init_verbs = 1;
 	spec->init_verbs[0] = cxt5045_init_verbs;
 	spec->spdif_route = 0;
-	spec->num_channel_mode = ARRAY_SIZE(cxt5045_modes),
-	spec->channel_mode = cxt5045_modes,
+	spec->num_channel_mode = ARRAY_SIZE(cxt5045_modes);
+	spec->channel_mode = cxt5045_modes;
 
+	set_beep_amp(spec, 0x16, 0, 1);
 
 	codec->patch_ops = conexant_patch_ops;
 
@@ -1211,6 +1259,9 @@ static int patch_cxt5045(struct hda_codec *codec)
 		break;
 	}
 
+	if (spec->beep_amp)
+		snd_hda_attach_beep_device(codec, spec->beep_amp);
+
 	return 0;
 }
 
@@ -1632,6 +1683,11 @@ static void cxt5051_update_speaker(struct hda_codec *codec)
 	pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
 	snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
 			    pinctl);
+	/* on ideapad there is an aditional speaker (subwoofer) to mute */
+	if (spec->ideapad)
+		snd_hda_codec_write(codec, 0x1b, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    pinctl);
 }
 
 /* turn on/off EAPD (+ mute HP) as a master switch */
@@ -1888,6 +1944,13 @@ static void cxt5051_init_mic_port(struct hda_codec *codec, hda_nid_t nid,
 #endif
 }
 
+static struct hda_verb cxt5051_ideapad_init_verbs[] = {
+	/* Subwoofer */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{ } /* end */
+};
+
 /* initialize jack-sensing, too */
 static int cxt5051_init(struct hda_codec *codec)
 {
@@ -1917,6 +1980,7 @@ enum {
 	CXT5051_LENOVO_X200,	/* Lenovo X200 laptop, also used for Advanced Mini Dock 250410 */
 	CXT5051_F700,       /* HP Compaq Presario F700 */
 	CXT5051_TOSHIBA,	/* Toshiba M300 & co */
+	CXT5051_IDEAPAD,	/* Lenovo IdeaPad Y430 */
 	CXT5051_MODELS
 };
 
@@ -1927,6 +1991,7 @@ static const char *cxt5051_models[CXT5051_MODELS] = {
 	[CXT5051_LENOVO_X200]	= "lenovo-x200",
 	[CXT5051_F700]          = "hp-700",
 	[CXT5051_TOSHIBA]	= "toshiba",
+	[CXT5051_IDEAPAD]	= "ideapad",
 };
 
 static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
@@ -1938,6 +2003,7 @@ static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
 		      CXT5051_LAPTOP),
 	SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT5051_LENOVO_X200),
+	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo IdeaPad", CXT5051_IDEAPAD),
 	{}
 };
 
@@ -1972,6 +2038,8 @@ static int patch_cxt5051(struct hda_codec *codec)
 	spec->cur_adc = 0;
 	spec->cur_adc_idx = 0;
 
+	set_beep_amp(spec, 0x13, 0, HDA_OUTPUT);
+
 	codec->patch_ops.unsol_event = cxt5051_hp_unsol_event;
 
 	board_config = snd_hda_check_board_config(codec, CXT5051_MODELS,
@@ -1989,6 +2057,10 @@ static int patch_cxt5051(struct hda_codec *codec)
 		break;
 	case CXT5051_LENOVO_X200:
 		spec->init_verbs[0] = cxt5051_lenovo_x200_init_verbs;
+		/* Thinkpad X301 does not have S/PDIF wired and no ability
+		   to use a docking station. */
+		if (codec->subsystem_id == 0x17aa211f)
+			spec->multiout.dig_out_nid = 0;
 		break;
 	case CXT5051_F700:
 		spec->init_verbs[0] = cxt5051_f700_init_verbs;
@@ -1999,8 +2071,16 @@ static int patch_cxt5051(struct hda_codec *codec)
 		spec->mixers[0] = cxt5051_toshiba_mixers;
 		spec->auto_mic = AUTO_MIC_PORTB;
 		break;
+	case CXT5051_IDEAPAD:
+		spec->init_verbs[spec->num_init_verbs++] =
+			cxt5051_ideapad_init_verbs;
+		spec->ideapad = 1;
+		break;
 	}
 
+	if (spec->beep_amp)
+		snd_hda_attach_beep_device(codec, spec->beep_amp);
+
 	return 0;
 }
 
@@ -2616,7 +2696,6 @@ static struct snd_kcontrol_new cxt5066_vostro_mixers[] = {
 		.put = cxt5066_mic_boost_mux_enum_put,
 		.private_value = 0x23 | 0x100,
 	},
-	HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0x13, 1, 0x0, HDA_OUTPUT),
 	{}
 };
 
@@ -2977,8 +3056,10 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
+ 	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
+ 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G series (AMD)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "ideapad", CXT5066_IDEAPAD),
-	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
 	{}
 };
 
@@ -3014,6 +3095,8 @@ static int patch_cxt5066(struct hda_codec *codec)
 	spec->cur_adc = 0;
 	spec->cur_adc_idx = 0;
 
+	set_beep_amp(spec, 0x13, 0, HDA_OUTPUT);
+
 	board_config = snd_hda_check_board_config(codec, CXT5066_MODELS,
 						  cxt5066_models, cxt5066_cfg_tbl);
 	switch (board_config) {
@@ -3062,7 +3145,6 @@ static int patch_cxt5066(struct hda_codec *codec)
 		spec->port_d_mode = 0;
 		spec->dell_vostro = 1;
 		spec->mic_boost = 3; /* default 30dB gain */
-		snd_hda_attach_beep_device(codec, 0x13);
 
 		/* no S/PDIF out */
 		spec->multiout.dig_out_nid = 0;
@@ -3104,6 +3186,9 @@ static int patch_cxt5066(struct hda_codec *codec)
 		break;
 	}
 
+	if (spec->beep_amp)
+		snd_hda_attach_beep_device(codec, spec->beep_amp);
+
 	return 0;
 }
 
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 2fc53961054..522e0748ee9 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -698,11 +698,51 @@ static void hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
  * Callbacks
  */
 
-static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
+/* HBR should be Non-PCM, 8 channels */
+#define is_hbr_format(format) \
+	((format & AC_FMT_TYPE_NON_PCM) && (format & AC_FMT_CHAN_MASK) == 7)
+
+static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
 			      u32 stream_tag, int format)
 {
+	struct hdmi_spec *spec = codec->spec;
 	int tag;
 	int fmt;
+	int pinctl;
+	int new_pinctl = 0;
+	int i;
+
+	for (i = 0; i < spec->num_pins; i++) {
+		if (spec->pin_cvt[i] != nid)
+			continue;
+		if (!(snd_hda_query_pin_caps(codec, spec->pin[i]) & AC_PINCAP_HBR))
+			continue;
+
+		pinctl = snd_hda_codec_read(codec, spec->pin[i], 0,
+					    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+		new_pinctl = pinctl & ~AC_PINCTL_EPT;
+		if (is_hbr_format(format))
+			new_pinctl |= AC_PINCTL_EPT_HBR;
+		else
+			new_pinctl |= AC_PINCTL_EPT_NATIVE;
+
+		snd_printdd("hdmi_setup_stream: "
+			    "NID=0x%x, %spinctl=0x%x\n",
+			    spec->pin[i],
+			    pinctl == new_pinctl ? "" : "new-",
+			    new_pinctl);
+
+		if (pinctl != new_pinctl)
+			snd_hda_codec_write(codec, spec->pin[i], 0,
+					    AC_VERB_SET_PIN_WIDGET_CONTROL,
+					    new_pinctl);
+	}
+
+	if (is_hbr_format(format) && !new_pinctl) {
+		snd_printdd("hdmi_setup_stream: HBR is not supported\n");
+		return -EINVAL;
+	}
 
 	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
 	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
@@ -722,6 +762,7 @@ static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
 	if (fmt != format)
 		snd_hda_codec_write(codec, nid, 0,
 				    AC_VERB_SET_STREAM_FORMAT, format);
+	return 0;
 }
 
 /*
diff --git a/sound/pci/hda/patch_intelhdmi.c b/sound/pci/hda/patch_intelhdmi.c
index b81d23e42ac..5972d5e7d01 100644
--- a/sound/pci/hda/patch_intelhdmi.c
+++ b/sound/pci/hda/patch_intelhdmi.c
@@ -66,8 +66,7 @@ static int intel_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
 
 	hdmi_setup_audio_infoframe(codec, hinfo->nid, substream);
 
-	hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
-	return 0;
+	return hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
 }
 
 static int intel_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index b0652acee9b..a281836fd47 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -202,8 +202,7 @@ static int nvhdmi_dig_playback_pcm_prepare_8ch_89(struct hda_pcm_stream *hinfo,
 
 	hdmi_setup_audio_infoframe(codec, hinfo->nid, substream);
 
-	hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
-	return 0;
+	return hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
 }
 
 static int nvhdmi_dig_playback_pcm_prepare_8ch(struct hda_pcm_stream *hinfo,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 596ea2f12cf..6ac53f7de54 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -256,6 +256,13 @@ enum {
 	ALC882_MODEL_LAST,
 };
 
+/* ALC680 models */
+enum {
+	ALC680_BASE,
+	ALC680_AUTO,
+	ALC680_MODEL_LAST,
+};
+
 /* for GPIO Poll */
 #define GPIO_MASK	0x03
 
@@ -326,6 +333,12 @@ struct alc_spec {
 	hda_nid_t *capsrc_nids;
 	hda_nid_t dig_in_nid;		/* digital-in NID; optional */
 
+	/* capture setup for dynamic dual-adc switch */
+	unsigned int cur_adc_idx;
+	hda_nid_t cur_adc;
+	unsigned int cur_adc_stream_tag;
+	unsigned int cur_adc_format;
+
 	/* capture source */
 	unsigned int num_mux_defs;
 	const struct hda_input_mux *input_mux;
@@ -367,6 +380,7 @@ struct alc_spec {
 
 	/* other flags */
 	unsigned int no_analog :1; /* digital I/O only */
+	unsigned int dual_adc_switch:1; /* switch ADCs (for ALC275) */
 	int init_amp;
 
 	/* for virtual master */
@@ -833,9 +847,13 @@ static void alc_set_input_pin(struct hda_codec *codec, hda_nid_t nid,
 
 	if (auto_pin_type <= AUTO_PIN_FRONT_MIC) {
 		unsigned int pincap;
+		unsigned int oldval;
+		oldval = snd_hda_codec_read(codec, nid, 0,
+					    AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
 		pincap = snd_hda_query_pin_caps(codec, nid);
 		pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
-		if (pincap & AC_PINCAP_VREF_80)
+		/* if the default pin setup is vref50, we give it priority */
+		if ((pincap & AC_PINCAP_VREF_80) && oldval != PIN_VREF50)
 			val = PIN_VREF80;
 		else if (pincap & AC_PINCAP_VREF_50)
 			val = PIN_VREF50;
@@ -1003,6 +1021,29 @@ static int get_connection_index(struct hda_codec *codec, hda_nid_t mux,
 	return -1;
 }
 
+/* switch the current ADC according to the jack state */
+static void alc_dual_mic_adc_auto_switch(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	unsigned int present;
+	hda_nid_t new_adc;
+
+	present = snd_hda_jack_detect(codec, spec->ext_mic.pin);
+	if (present)
+		spec->cur_adc_idx = 1;
+	else
+		spec->cur_adc_idx = 0;
+	new_adc = spec->adc_nids[spec->cur_adc_idx];
+	if (spec->cur_adc && spec->cur_adc != new_adc) {
+		/* stream is running, let's swap the current ADC */
+		snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+		spec->cur_adc = new_adc;
+		snd_hda_codec_setup_stream(codec, new_adc,
+					   spec->cur_adc_stream_tag, 0,
+					   spec->cur_adc_format);
+	}
+}
+
 static void alc_mic_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -1017,6 +1058,11 @@ static void alc_mic_automute(struct hda_codec *codec)
 	if (snd_BUG_ON(!spec->adc_nids))
 		return;
 
+	if (spec->dual_adc_switch) {
+		alc_dual_mic_adc_auto_switch(codec);
+		return;
+	}
+
 	cap_nid = spec->capsrc_nids ? spec->capsrc_nids[0] : spec->adc_nids[0];
 
 	present = snd_hda_jack_detect(codec, spec->ext_mic.pin);
@@ -1499,6 +1545,63 @@ static int alc_read_coef_idx(struct hda_codec *codec,
 	return val;
 }
 
+/* set right pin controls for digital I/O */
+static void alc_auto_init_digital(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	int i;
+	hda_nid_t pin;
+
+	for (i = 0; i < spec->autocfg.dig_outs; i++) {
+		pin = spec->autocfg.dig_out_pins[i];
+		if (pin) {
+			snd_hda_codec_write(codec, pin, 0,
+					    AC_VERB_SET_PIN_WIDGET_CONTROL,
+					    PIN_OUT);
+		}
+	}
+	pin = spec->autocfg.dig_in_pin;
+	if (pin)
+		snd_hda_codec_write(codec, pin, 0,
+				    AC_VERB_SET_PIN_WIDGET_CONTROL,
+				    PIN_IN);
+}
+
+/* parse digital I/Os and set up NIDs in BIOS auto-parse mode */
+static void alc_auto_parse_digital(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	int i, err;
+	hda_nid_t dig_nid;
+
+	/* support multiple SPDIFs; the secondary is set up as a slave */
+	for (i = 0; i < spec->autocfg.dig_outs; i++) {
+		err = snd_hda_get_connections(codec,
+					      spec->autocfg.dig_out_pins[i],
+					      &dig_nid, 1);
+		if (err < 0)
+			continue;
+		if (!i) {
+			spec->multiout.dig_out_nid = dig_nid;
+			spec->dig_out_type = spec->autocfg.dig_out_type[0];
+		} else {
+			spec->multiout.slave_dig_outs = spec->slave_dig_outs;
+			if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
+				break;
+			spec->slave_dig_outs[i - 1] = dig_nid;
+		}
+	}
+
+	if (spec->autocfg.dig_in_pin) {
+		hda_nid_t dig_nid;
+		err = snd_hda_get_connections(codec,
+					      spec->autocfg.dig_in_pin,
+					      &dig_nid, 1);
+		if (err > 0)
+			spec->dig_in_nid = dig_nid;
+	}
+}
+
 /*
  * ALC888
  */
@@ -3607,6 +3710,41 @@ static int alc880_alt_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
 	return 0;
 }
 
+/* analog capture with dynamic dual-adc changes */
+static int dualmic_capture_pcm_prepare(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       unsigned int stream_tag,
+				       unsigned int format,
+				       struct snd_pcm_substream *substream)
+{
+	struct alc_spec *spec = codec->spec;
+	spec->cur_adc = spec->adc_nids[spec->cur_adc_idx];
+	spec->cur_adc_stream_tag = stream_tag;
+	spec->cur_adc_format = format;
+	snd_hda_codec_setup_stream(codec, spec->cur_adc, stream_tag, 0, format);
+	return 0;
+}
+
+static int dualmic_capture_pcm_cleanup(struct hda_pcm_stream *hinfo,
+				       struct hda_codec *codec,
+				       struct snd_pcm_substream *substream)
+{
+	struct alc_spec *spec = codec->spec;
+	snd_hda_codec_cleanup_stream(codec, spec->cur_adc);
+	spec->cur_adc = 0;
+	return 0;
+}
+
+static struct hda_pcm_stream dualmic_pcm_analog_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0, /* fill later */
+	.ops = {
+		.prepare = dualmic_capture_pcm_prepare,
+		.cleanup = dualmic_capture_pcm_cleanup
+	},
+};
 
 /*
  */
@@ -4936,7 +5074,7 @@ static void alc880_auto_init_input_src(struct hda_codec *codec)
 static int alc880_parse_auto_config(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	int i, err;
+	int err;
 	static hda_nid_t alc880_ignore[] = { 0x1d, 0 };
 
 	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
@@ -4967,25 +5105,7 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	/* check multiple SPDIF-out (for recent codecs) */
-	for (i = 0; i < spec->autocfg.dig_outs; i++) {
-		hda_nid_t dig_nid;
-		err = snd_hda_get_connections(codec,
-					      spec->autocfg.dig_out_pins[i],
-					      &dig_nid, 1);
-		if (err < 0)
-			continue;
-		if (!i)
-			spec->multiout.dig_out_nid = dig_nid;
-		else {
-			spec->multiout.slave_dig_outs = spec->slave_dig_outs;
-			if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
-				break;
-			spec->slave_dig_outs[i - 1] = dig_nid;
-		}
-	}
-	if (spec->autocfg.dig_in_pin)
-		spec->dig_in_nid = ALC880_DIGIN_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -5008,6 +5128,7 @@ static void alc880_auto_init(struct hda_codec *codec)
 	alc880_auto_init_extra_out(codec);
 	alc880_auto_init_analog_input(codec);
 	alc880_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -5045,6 +5166,39 @@ static void fixup_automic_adc(struct hda_codec *codec)
 	spec->auto_mic = 0; /* disable auto-mic to be sure */
 }
 
+/* select or unmute the given capsrc route */
+static void select_or_unmute_capsrc(struct hda_codec *codec, hda_nid_t cap,
+				    int idx)
+{
+	if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
+		snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
+					 HDA_AMP_MUTE, 0);
+	} else {
+		snd_hda_codec_write_cache(codec, cap, 0,
+					  AC_VERB_SET_CONNECT_SEL, idx);
+	}
+}
+
+/* set the default connection to that pin */
+static int init_capsrc_for_pin(struct hda_codec *codec, hda_nid_t pin)
+{
+	struct alc_spec *spec = codec->spec;
+	int i;
+
+	for (i = 0; i < spec->num_adc_nids; i++) {
+		hda_nid_t cap = spec->capsrc_nids ?
+			spec->capsrc_nids[i] : spec->adc_nids[i];
+		int idx;
+
+		idx = get_connection_index(codec, cap, pin);
+		if (idx < 0)
+			continue;
+		select_or_unmute_capsrc(codec, cap, idx);
+		return i; /* return the found index */
+	}
+	return -1; /* not found */
+}
+
 /* choose the ADC/MUX containing the input pin and initialize the setup */
 static void fixup_single_adc(struct hda_codec *codec)
 {
@@ -5061,33 +5215,24 @@ static void fixup_single_adc(struct hda_codec *codec)
 	}
 	if (!pin)
 		return;
-
-	/* set the default connection to that pin */
-	for (i = 0; i < spec->num_adc_nids; i++) {
-		hda_nid_t cap = spec->capsrc_nids ?
-			spec->capsrc_nids[i] : spec->adc_nids[i];
-		int idx;
-
-		idx = get_connection_index(codec, cap, pin);
-		if (idx < 0)
-			continue;
+	i = init_capsrc_for_pin(codec, pin);
+	if (i >= 0) {
 		/* use only this ADC */
 		if (spec->capsrc_nids)
 			spec->capsrc_nids += i;
 		spec->adc_nids += i;
 		spec->num_adc_nids = 1;
-		/* select or unmute this route */
-		if (get_wcaps_type(get_wcaps(codec, cap)) == AC_WID_AUD_MIX) {
-			snd_hda_codec_amp_stereo(codec, cap, HDA_INPUT, idx,
-						 HDA_AMP_MUTE, 0);
-		} else {
-			snd_hda_codec_write_cache(codec, cap, 0,
-					  AC_VERB_SET_CONNECT_SEL, idx);
-		}
-		return;
 	}
 }
 
+/* initialize dual adcs */
+static void fixup_dual_adc_switch(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	init_capsrc_for_pin(codec, spec->ext_mic.pin);
+	init_capsrc_for_pin(codec, spec->int_mic.pin);
+}
+
 static void set_capture_mixer(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -5101,7 +5246,10 @@ static void set_capture_mixer(struct hda_codec *codec)
 	};
 	if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3) {
 		int mux = 0;
-		if (spec->auto_mic)
+		int num_adcs = spec->num_adc_nids;
+		if (spec->dual_adc_switch)
+			fixup_dual_adc_switch(codec);
+		else if (spec->auto_mic)
 			fixup_automic_adc(codec);
 		else if (spec->input_mux) {
 			if (spec->input_mux->num_items > 1)
@@ -5109,7 +5257,9 @@ static void set_capture_mixer(struct hda_codec *codec)
 			else if (spec->input_mux->num_items == 1)
 				fixup_single_adc(codec);
 		}
-		spec->cap_mixer = caps[mux][spec->num_adc_nids - 1];
+		if (spec->dual_adc_switch)
+			num_adcs = 1;
+		spec->cap_mixer = caps[mux][num_adcs - 1];
 	}
 }
 
@@ -5183,6 +5333,7 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nids,
 
 static struct snd_pci_quirk beep_white_list[] = {
 	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
+	SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
 	{}
 };
 
@@ -6624,6 +6775,7 @@ static void alc260_auto_init(struct hda_codec *codec)
 	alc260_auto_init_multi_out(codec);
 	alc260_auto_init_analog_input(codec);
 	alc260_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -6640,6 +6792,29 @@ static struct hda_amp_list alc260_loopbacks[] = {
 #endif
 
 /*
+ * Pin config fixes
+ */
+enum {
+	PINFIX_HP_DC5750,
+};
+
+static struct alc_pincfg alc260_hp_dc5750_pinfix[] = {
+	{ 0x11, 0x90130110 }, /* speaker */
+	{ }
+};
+
+static const struct alc_fixup alc260_fixups[] = {
+	[PINFIX_HP_DC5750] = {
+		.pins = alc260_hp_dc5750_pinfix
+	},
+};
+
+static struct snd_pci_quirk alc260_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x103c, 0x280a, "HP dc5750", PINFIX_HP_DC5750),
+	{}
+};
+
+/*
  * ALC260 configurations
  */
 static const char *alc260_models[ALC260_MODEL_LAST] = {
@@ -6838,6 +7013,9 @@ static int patch_alc260(struct hda_codec *codec)
 		board_config = ALC260_AUTO;
 	}
 
+	if (board_config == ALC260_AUTO)
+		alc_pick_fixup(codec, alc260_fixup_tbl, alc260_fixups, 1);
+
 	if (board_config == ALC260_AUTO) {
 		/* automatic parse from the BIOS config */
 		err = alc260_parse_auto_config(codec);
@@ -6883,6 +7061,9 @@ static int patch_alc260(struct hda_codec *codec)
 	set_capture_mixer(codec);
 	set_beep_amp(spec, 0x07, 0x05, HDA_INPUT);
 
+	if (board_config == ALC260_AUTO)
+		alc_pick_fixup(codec, alc260_fixup_tbl, alc260_fixups, 0);
+
 	spec->vmaster_nid = 0x08;
 
 	codec->patch_ops = alc_patch_ops;
@@ -7003,7 +7184,7 @@ static struct hda_input_mux alc883_lenovo_nb0763_capture_source = {
 	.num_items = 4,
 	.items = {
 		{ "Mic", 0x0 },
-		{ "iMic", 0x1 },
+		{ "Int Mic", 0x1 },
 		{ "Line", 0x2 },
 		{ "CD", 0x4 },
 	},
@@ -8573,8 +8754,8 @@ static struct snd_kcontrol_new alc883_lenovo_nb0763_mixer[] = {
 	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
+	HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
 	{ } /* end */
 };
 
@@ -10265,7 +10446,8 @@ static struct alc_config_preset alc882_presets[] = {
  * Pin config fixes
  */
 enum {
-	PINFIX_ABIT_AW9D_MAX
+	PINFIX_ABIT_AW9D_MAX,
+	PINFIX_PB_M5210,
 };
 
 static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
@@ -10275,13 +10457,22 @@ static struct alc_pincfg alc882_abit_aw9d_pinfix[] = {
 	{ }
 };
 
+static const struct hda_verb pb_m5210_verbs[] = {
+	{ 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50 },
+	{}
+};
+
 static const struct alc_fixup alc882_fixups[] = {
 	[PINFIX_ABIT_AW9D_MAX] = {
 		.pins = alc882_abit_aw9d_pinfix
 	},
+	[PINFIX_PB_M5210] = {
+		.verbs = pb_m5210_verbs
+	},
 };
 
 static struct snd_pci_quirk alc882_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", PINFIX_PB_M5210),
 	SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
 	{}
 };
@@ -10446,7 +10637,7 @@ static int alc882_parse_auto_config(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	static hda_nid_t alc882_ignore[] = { 0x1d, 0 };
-	int i, err;
+	int err;
 
 	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
 					   alc882_ignore);
@@ -10476,25 +10667,7 @@ static int alc882_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	/* check multiple SPDIF-out (for recent codecs) */
-	for (i = 0; i < spec->autocfg.dig_outs; i++) {
-		hda_nid_t dig_nid;
-		err = snd_hda_get_connections(codec,
-					      spec->autocfg.dig_out_pins[i],
-					      &dig_nid, 1);
-		if (err < 0)
-			continue;
-		if (!i)
-			spec->multiout.dig_out_nid = dig_nid;
-		else {
-			spec->multiout.slave_dig_outs = spec->slave_dig_outs;
-			if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
-				break;
-			spec->slave_dig_outs[i - 1] = dig_nid;
-		}
-	}
-	if (spec->autocfg.dig_in_pin)
-		spec->dig_in_nid = ALC880_DIGIN_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -10524,6 +10697,7 @@ static void alc882_auto_init(struct hda_codec *codec)
 	alc882_auto_init_hp_out(codec);
 	alc882_auto_init_analog_input(codec);
 	alc882_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -12054,12 +12228,7 @@ static int alc262_parse_auto_config(struct hda_codec *codec)
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
  dig_only:
-	if (spec->autocfg.dig_outs) {
-		spec->multiout.dig_out_nid = ALC262_DIGOUT_NID;
-		spec->dig_out_type = spec->autocfg.dig_out_type[0];
-	}
-	if (spec->autocfg.dig_in_pin)
-		spec->dig_in_nid = ALC262_DIGIN_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -12091,6 +12260,7 @@ static void alc262_auto_init(struct hda_codec *codec)
 	alc262_auto_init_hp_out(codec);
 	alc262_auto_init_analog_input(codec);
 	alc262_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -13024,10 +13194,14 @@ static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
 		dac = 0x02;
 		break;
 	case 0x15:
+	case 0x1a: /* ALC259/269 only */
+	case 0x1b: /* ALC259/269 only */
 	case 0x21: /* ALC269vb has this pin, too */
 		dac = 0x03;
 		break;
 	default:
+		snd_printd(KERN_WARNING "hda_codec: "
+			   "ignoring pin 0x%x as unknown\n", nid);
 		return 0;
 	}
 	if (spec->multiout.dac_nids[0] != dac &&
@@ -13078,7 +13252,7 @@ static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec,
 				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
 		if (err < 0)
 			return err;
-	} else {
+	} else if (nid) {
 		err = alc268_new_analog_output(spec, nid, "Speaker", 0);
 		if (err < 0)
 			return err;
@@ -13227,10 +13401,7 @@ static int alc268_parse_auto_config(struct hda_codec *codec)
 
  dig_only:
 	/* digital only support output */
-	if (spec->autocfg.dig_outs) {
-		spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
-		spec->dig_out_type = spec->autocfg.dig_out_type[0];
-	}
+	alc_auto_parse_digital(codec);
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
 
@@ -13260,6 +13431,7 @@ static void alc268_auto_init(struct hda_codec *codec)
 	alc268_auto_init_hp_out(codec);
 	alc268_auto_init_mono_speaker_out(codec);
 	alc268_auto_init_analog_input(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -14152,6 +14324,36 @@ static int alc269_mic2_mute_check_ps(struct hda_codec *codec, hda_nid_t nid)
 }
 #endif /* CONFIG_SND_HDA_POWER_SAVE */
 
+static int alc275_setup_dual_adc(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	if (codec->vendor_id != 0x10ec0275 || !spec->auto_mic)
+		return 0;
+	if ((spec->ext_mic.pin >= 0x18 && spec->int_mic.pin <= 0x13) ||
+	    (spec->ext_mic.pin <= 0x12 && spec->int_mic.pin >= 0x18)) {
+		if (spec->ext_mic.pin <= 0x12) {
+			spec->private_adc_nids[0] = 0x08;
+			spec->private_adc_nids[1] = 0x11;
+			spec->private_capsrc_nids[0] = 0x23;
+			spec->private_capsrc_nids[1] = 0x22;
+		} else {
+			spec->private_adc_nids[0] = 0x11;
+			spec->private_adc_nids[1] = 0x08;
+			spec->private_capsrc_nids[0] = 0x22;
+			spec->private_capsrc_nids[1] = 0x23;
+		}
+		spec->adc_nids = spec->private_adc_nids;
+		spec->capsrc_nids = spec->private_capsrc_nids;
+		spec->num_adc_nids = 2;
+		spec->dual_adc_switch = 1;
+		snd_printdd("realtek: enabling dual ADC switchg (%02x:%02x)\n",
+			    spec->adc_nids[0], spec->adc_nids[1]);
+		return 1;
+	}
+	return 0;
+}
+
 /*
  * BIOS auto configuration
  */
@@ -14175,8 +14377,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = ALC269_DIGOUT_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -14191,13 +14392,15 @@ static int alc269_parse_auto_config(struct hda_codec *codec)
 
 	spec->num_mux_defs = 1;
 	spec->input_mux = &spec->private_imux[0];
-	fillup_priv_adc_nids(codec, alc269_adc_candidates,
-			     sizeof(alc269_adc_candidates));
+
+	if (!alc275_setup_dual_adc(codec))
+		fillup_priv_adc_nids(codec, alc269_adc_candidates,
+				     sizeof(alc269_adc_candidates));
 
 	/* set default input source */
-	snd_hda_codec_write_cache(codec, spec->capsrc_nids[0],
-				  0, AC_VERB_SET_CONNECT_SEL,
-				  spec->input_mux->items[0].index);
+	if (!spec->dual_adc_switch)
+		select_or_unmute_capsrc(codec, spec->capsrc_nids[0],
+					spec->input_mux->items[0].index);
 
 	err = alc_auto_add_mic_boost(codec);
 	if (err < 0)
@@ -14221,6 +14424,7 @@ static void alc269_auto_init(struct hda_codec *codec)
 	alc269_auto_init_multi_out(codec);
 	alc269_auto_init_hp_out(codec);
 	alc269_auto_init_analog_input(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -14493,6 +14697,10 @@ static int patch_alc269(struct hda_codec *codec)
 		 */
 		spec->stream_analog_playback = &alc269_44k_pcm_analog_playback;
 		spec->stream_analog_capture = &alc269_44k_pcm_analog_capture;
+	} else if (spec->dual_adc_switch) {
+		spec->stream_analog_playback = &alc269_pcm_analog_playback;
+		/* switch ADC dynamically */
+		spec->stream_analog_capture = &dualmic_pcm_analog_capture;
 	} else {
 		spec->stream_analog_playback = &alc269_pcm_analog_playback;
 		spec->stream_analog_capture = &alc269_pcm_analog_capture;
@@ -15378,8 +15586,7 @@ static int alc861_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -15405,6 +15612,7 @@ static void alc861_auto_init(struct hda_codec *codec)
 	alc861_auto_init_multi_out(codec);
 	alc861_auto_init_hp_out(codec);
 	alc861_auto_init_analog_input(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -16509,8 +16717,7 @@ static int alc861vd_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -16537,6 +16744,7 @@ static void alc861vd_auto_init(struct hda_codec *codec)
 	alc861vd_auto_init_hp_out(codec);
 	alc861vd_auto_init_analog_input(codec);
 	alc861vd_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -18520,7 +18728,7 @@ static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
 					      hda_nid_t dac)
 {
 	int i, num;
-	hda_nid_t srcs[4];
+	hda_nid_t srcs[HDA_MAX_CONNECTIONS];
 
 	alc_set_pin_output(codec, nid, pin_type);
 	/* need the manual connection? */
@@ -18624,8 +18832,7 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
-	if (spec->autocfg.dig_outs)
-		spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
+	alc_auto_parse_digital(codec);
 
 	if (spec->kctls.list)
 		add_mixer(spec, spec->kctls.list);
@@ -18635,7 +18842,7 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 
 	add_verb(spec, alc662_init_verbs);
 	if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
-	    codec->vendor_id == 0x10ec0665)
+	    codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
 		add_verb(spec, alc663_init_verbs);
 
 	if (codec->vendor_id == 0x10ec0272)
@@ -18662,6 +18869,7 @@ static void alc662_auto_init(struct hda_codec *codec)
 	alc662_auto_init_hp_out(codec);
 	alc662_auto_init_analog_input(codec);
 	alc662_auto_init_input_src(codec);
+	alc_auto_init_digital(codec);
 	if (spec->unsol_event)
 		alc_inithook(codec);
 }
@@ -18781,6 +18989,333 @@ static int patch_alc888(struct hda_codec *codec)
 }
 
 /*
+ * ALC680 support
+ */
+#define ALC680_DIGOUT_NID	ALC880_DIGOUT_NID
+#define alc680_modes		alc260_modes
+
+static hda_nid_t alc680_dac_nids[3] = {
+	/* Lout1, Lout2, hp */
+	0x02, 0x03, 0x04
+};
+
+static hda_nid_t alc680_adc_nids[3] = {
+	/* ADC0-2 */
+	/* DMIC, MIC, Line-in*/
+	0x07, 0x08, 0x09
+};
+
+static struct snd_kcontrol_new alc680_base_mixer[] = {
+	/* output mixer control */
+	HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x4, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Headphone Playback Switch", 0x16, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+	{ }
+};
+
+static struct snd_kcontrol_new alc680_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc680_init_verbs[] = {
+	/* Unmute DAC0-1 and set vol = 0 */
+	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{ }
+};
+
+/* create input playback/capture controls for the given pin */
+static int alc680_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
+				    const char *ctlname, int idx)
+{
+	hda_nid_t dac;
+	int err;
+
+	switch (nid) {
+	case 0x14:
+		dac = 0x02;
+		break;
+	case 0x15:
+		dac = 0x03;
+		break;
+	case 0x16:
+		dac = 0x04;
+		break;
+	default:
+		return 0;
+	}
+	if (spec->multiout.dac_nids[0] != dac &&
+	    spec->multiout.dac_nids[1] != dac) {
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, ctlname,
+				  HDA_COMPOSE_AMP_VAL(dac, 3, idx,
+						      HDA_OUTPUT));
+		if (err < 0)
+			return err;
+
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, ctlname,
+			  HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
+
+		if (err < 0)
+			return err;
+		spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+	}
+
+	return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc680_auto_create_multi_out_ctls(struct alc_spec *spec,
+					     const struct auto_pin_cfg *cfg)
+{
+	hda_nid_t nid;
+	int err;
+
+	spec->multiout.dac_nids = spec->private_dac_nids;
+
+	nid = cfg->line_out_pins[0];
+	if (nid) {
+		const char *name;
+		if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
+			name = "Speaker";
+		else
+			name = "Front";
+		err = alc680_new_analog_output(spec, nid, name, 0);
+		if (err < 0)
+			return err;
+	}
+
+	nid = cfg->speaker_pins[0];
+	if (nid) {
+		err = alc680_new_analog_output(spec, nid, "Speaker", 0);
+		if (err < 0)
+			return err;
+	}
+	nid = cfg->hp_pins[0];
+	if (nid) {
+		err = alc680_new_analog_output(spec, nid, "Headphone", 0);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static void alc680_auto_set_output_and_unmute(struct hda_codec *codec,
+					      hda_nid_t nid, int pin_type)
+{
+	alc_set_pin_output(codec, nid, pin_type);
+}
+
+static void alc680_auto_init_multi_out(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t nid = spec->autocfg.line_out_pins[0];
+	if (nid) {
+		int pin_type = get_pin_type(spec->autocfg.line_out_type);
+		alc680_auto_set_output_and_unmute(codec, nid, pin_type);
+	}
+}
+
+static void alc680_auto_init_hp_out(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t pin;
+
+	pin = spec->autocfg.hp_pins[0];
+	if (pin)
+		alc680_auto_set_output_and_unmute(codec, pin, PIN_HP);
+	pin = spec->autocfg.speaker_pins[0];
+	if (pin)
+		alc680_auto_set_output_and_unmute(codec, pin, PIN_OUT);
+}
+
+/* pcm configuration: identical with ALC880 */
+#define alc680_pcm_analog_playback	alc880_pcm_analog_playback
+#define alc680_pcm_analog_capture	alc880_pcm_analog_capture
+#define alc680_pcm_analog_alt_capture	alc880_pcm_analog_alt_capture
+#define alc680_pcm_digital_playback	alc880_pcm_digital_playback
+
+static struct hda_input_mux alc680_capture_source = {
+	.num_items = 1,
+	.items = {
+		{ "Mic", 0x0 },
+	},
+};
+
+/*
+ * BIOS auto configuration
+ */
+static int alc680_parse_auto_config(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	int err;
+	static hda_nid_t alc680_ignore[] = { 0 };
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+					   alc680_ignore);
+	if (err < 0)
+		return err;
+	if (!spec->autocfg.line_outs) {
+		if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) {
+			spec->multiout.max_channels = 2;
+			spec->no_analog = 1;
+			goto dig_only;
+		}
+		return 0; /* can't find valid BIOS pin config */
+	}
+	err = alc680_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	spec->multiout.max_channels = 2;
+
+ dig_only:
+	/* digital only support output */
+	alc_auto_parse_digital(codec);
+	if (spec->kctls.list)
+		add_mixer(spec, spec->kctls.list);
+
+	add_verb(spec, alc680_init_verbs);
+	spec->num_mux_defs = 1;
+	spec->input_mux = &alc680_capture_source;
+
+	err = alc_auto_add_mic_boost(codec);
+	if (err < 0)
+		return err;
+
+	return 1;
+}
+
+#define alc680_auto_init_analog_input	alc882_auto_init_analog_input
+
+/* init callback for auto-configuration model -- overriding the default init */
+static void alc680_auto_init(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+	alc680_auto_init_multi_out(codec);
+	alc680_auto_init_hp_out(codec);
+	alc680_auto_init_analog_input(codec);
+	alc_auto_init_digital(codec);
+	if (spec->unsol_event)
+		alc_inithook(codec);
+}
+
+/*
+ * configuration and preset
+ */
+static const char *alc680_models[ALC680_MODEL_LAST] = {
+	[ALC680_BASE]		= "base",
+	[ALC680_AUTO]		= "auto",
+};
+
+static struct snd_pci_quirk alc680_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1043, 0x12f3, "ASUS NX90", ALC680_BASE),
+	{}
+};
+
+static struct alc_config_preset alc680_presets[] = {
+	[ALC680_BASE] = {
+		.mixers = { alc680_base_mixer },
+		.cap_mixer =  alc680_capture_mixer,
+		.init_verbs = { alc680_init_verbs },
+		.num_dacs = ARRAY_SIZE(alc680_dac_nids),
+		.dac_nids = alc680_dac_nids,
+		.num_adc_nids = ARRAY_SIZE(alc680_adc_nids),
+		.adc_nids = alc680_adc_nids,
+		.hp_nid = 0x04,
+		.dig_out_nid = ALC680_DIGOUT_NID,
+		.num_channel_mode = ARRAY_SIZE(alc680_modes),
+		.channel_mode = alc680_modes,
+		.input_mux = &alc680_capture_source,
+	},
+};
+
+static int patch_alc680(struct hda_codec *codec)
+{
+	struct alc_spec *spec;
+	int board_config;
+	int err;
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	board_config = snd_hda_check_board_config(codec, ALC680_MODEL_LAST,
+						  alc680_models,
+						  alc680_cfg_tbl);
+
+	if (board_config < 0 || board_config >= ALC680_MODEL_LAST) {
+		printk(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
+		       codec->chip_name);
+		board_config = ALC680_AUTO;
+	}
+
+	if (board_config == ALC680_AUTO) {
+		/* automatic parse from the BIOS config */
+		err = alc680_parse_auto_config(codec);
+		if (err < 0) {
+			alc_free(codec);
+			return err;
+		} else if (!err) {
+			printk(KERN_INFO
+			       "hda_codec: Cannot set up configuration "
+			       "from BIOS.  Using base mode...\n");
+			board_config = ALC680_BASE;
+		}
+	}
+
+	if (board_config != ALC680_AUTO)
+		setup_preset(codec, &alc680_presets[board_config]);
+
+	spec->stream_analog_playback = &alc680_pcm_analog_playback;
+	spec->stream_analog_capture = &alc680_pcm_analog_capture;
+	spec->stream_analog_alt_capture = &alc680_pcm_analog_alt_capture;
+	spec->stream_digital_playback = &alc680_pcm_digital_playback;
+
+	if (!spec->adc_nids) {
+		spec->adc_nids = alc680_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(alc680_adc_nids);
+	}
+
+	if (!spec->cap_mixer)
+		set_capture_mixer(codec);
+
+	spec->vmaster_nid = 0x02;
+
+	codec->patch_ops = alc_patch_ops;
+	if (board_config == ALC680_AUTO)
+		spec->init_hook = alc680_auto_init;
+
+	return 0;
+}
+
+/*
  * patch entries
  */
 static struct hda_codec_preset snd_hda_preset_realtek[] = {
@@ -18804,6 +19339,7 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = {
 	{ .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 },
 	{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
 	{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+	{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
 	{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
 	{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
 	{ .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc882 },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index f1e7babd692..b8d730c47df 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -202,6 +202,7 @@ struct sigmatel_spec {
 	unsigned int spdif_mute: 1;
 	unsigned int check_volume_offset:1;
 	unsigned int auto_mic:1;
+	unsigned int linear_tone_beep:1;
 
 	/* gpio lines */
 	unsigned int eapd_mask;
@@ -3802,7 +3803,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
 			return err;
 		if (codec->beep) {
 			/* IDT/STAC codecs have linear beep tone parameter */
-			codec->beep->linear_tone = 1;
+			codec->beep->linear_tone = spec->linear_tone_beep;
 			/* if no beep switch is available, make its own one */
 			caps = query_amp_caps(codec, nid, HDA_OUTPUT);
 			if (!(caps & AC_AMPCAP_MUTE)) {
@@ -5005,6 +5006,7 @@ static int patch_stac9200(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	spec->num_pins = ARRAY_SIZE(stac9200_pin_nids);
 	spec->pin_nids = stac9200_pin_nids;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS,
@@ -5068,6 +5070,7 @@ static int patch_stac925x(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
 	spec->pin_nids = stac925x_pin_nids;
 
@@ -5153,6 +5156,7 @@ static int patch_stac92hd73xx(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 0;
 	codec->slave_dig_outs = stac92hd73xx_slave_dig_outs;
 	spec->num_pins = ARRAY_SIZE(stac92hd73xx_pin_nids);
 	spec->pin_nids = stac92hd73xx_pin_nids;
@@ -5300,6 +5304,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	codec->slave_dig_outs = stac92hd83xxx_slave_dig_outs;
 	spec->digbeep_nid = 0x21;
 	spec->mux_nids = stac92hd83xxx_mux_nids;
@@ -5522,6 +5527,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 0;
 	codec->patch_ops = stac92xx_patch_ops;
 	spec->num_pins = STAC92HD71BXX_NUM_PINS;
 	switch (codec->vendor_id) {
@@ -5779,6 +5785,7 @@ static int patch_stac922x(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	spec->num_pins = ARRAY_SIZE(stac922x_pin_nids);
 	spec->pin_nids = stac922x_pin_nids;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_922X_MODELS,
@@ -5883,6 +5890,7 @@ static int patch_stac927x(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	codec->slave_dig_outs = stac927x_slave_dig_outs;
 	spec->num_pins = ARRAY_SIZE(stac927x_pin_nids);
 	spec->pin_nids = stac927x_pin_nids;
@@ -6018,6 +6026,7 @@ static int patch_stac9205(struct hda_codec *codec)
 
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	spec->num_pins = ARRAY_SIZE(stac9205_pin_nids);
 	spec->pin_nids = stac9205_pin_nids;
 	spec->board_config = snd_hda_check_board_config(codec, STAC_9205_MODELS,
@@ -6174,6 +6183,7 @@ static int patch_stac9872(struct hda_codec *codec)
 		return -ENOMEM;
 	codec->no_trigger_sense = 1;
 	codec->spec = spec;
+	spec->linear_tone_beep = 1;
 	spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
 	spec->pin_nids = stac9872_pin_nids;
 
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 73453814e09..ae3acb2b42d 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -552,24 +552,30 @@ static void via_auto_init_hp_out(struct hda_codec *codec)
 	}
 }
 
+static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin);
+
 static void via_auto_init_analog_input(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
+	unsigned int ctl;
 	int i;
 
 	for (i = 0; i < AUTO_PIN_LAST; i++) {
 		hda_nid_t nid = spec->autocfg.input_pins[i];
+		if (!nid)
+			continue;
 
+		if (spec->smart51_enabled && is_smart51_pins(spec, nid))
+			ctl = PIN_OUT;
+		else if (i <= AUTO_PIN_FRONT_MIC)
+			ctl = PIN_VREF50;
+		else
+			ctl = PIN_IN;
 		snd_hda_codec_write(codec, nid, 0,
-				    AC_VERB_SET_PIN_WIDGET_CONTROL,
-				    (i <= AUTO_PIN_FRONT_MIC ?
-				     PIN_VREF50 : PIN_IN));
-
+				    AC_VERB_SET_PIN_WIDGET_CONTROL, ctl);
 	}
 }
 
-static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin);
-
 static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid,
 				unsigned int *affected_parm)
 {
@@ -658,6 +664,8 @@ static void set_jack_power_state(struct hda_codec *codec)
 		/* PW0 (19h), SW1 (18h), AOW1 (11h) */
 		parm = AC_PWRST_D3;
 		set_pin_power_state(codec, 0x19, &parm);
+		if (spec->smart51_enabled)
+			parm = AC_PWRST_D0;
 		snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE,
 				    parm);
 		snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE,
@@ -667,6 +675,8 @@ static void set_jack_power_state(struct hda_codec *codec)
 		if (is_8ch) {
 			parm = AC_PWRST_D3;
 			set_pin_power_state(codec, 0x22, &parm);
+			if (spec->smart51_enabled)
+				parm = AC_PWRST_D0;
 			snd_hda_codec_write(codec, 0x26, 0,
 					    AC_VERB_SET_POWER_STATE, parm);
 			snd_hda_codec_write(codec, 0x24, 0,
@@ -3915,6 +3925,13 @@ static int vt1708S_auto_fill_dac_nids(struct via_spec *spec,
 		}
 	}
 
+	/* for Smart 5.1, line/mic inputs double as output pins */
+	if (cfg->line_outs == 1) {
+		spec->multiout.num_dacs = 3;
+		spec->multiout.dac_nids[AUTO_SEQ_SURROUND] = 0x11;
+		spec->multiout.dac_nids[AUTO_SEQ_CENLFE] = 0x24;
+	}
+
 	return 0;
 }
 
@@ -3932,7 +3949,8 @@ static int vt1708S_auto_create_multi_out_ctls(struct via_spec *spec,
 	for (i = 0; i <= AUTO_SEQ_SIDE; i++) {
 		nid = cfg->line_out_pins[i];
 
-		if (!nid)
+		/* for Smart 5.1, there are always at least six channels */
+		if (!nid && i > AUTO_SEQ_CENLFE)
 			continue;
 
 		nid_vol = nid_vols[i];
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index ad446267761..f64fb7d988c 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -97,6 +97,7 @@
 #include <linux/gameport.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/kernel.h>
 #include <asm/io.h>
 #include <sound/core.h>
 #include <sound/info.h>
@@ -667,13 +668,12 @@ static u32 atoh(const unsigned char *in, unsigned int len)
 	unsigned char c;
 
 	while (len) {
+		int value;
+
 		c = in[len - 1];
-		if ((c >= '0') && (c <= '9'))
-			sum += mult * (c - '0');
-		else if ((c >= 'A') && (c <= 'F'))
-			sum += mult * (c - ('A' - 10));
-		else if ((c >= 'a') && (c <= 'f'))
-			sum += mult * (c - ('a' - 10));
+		value = hex_to_bin(c);
+		if (value >= 0)
+			sum += mult * value;
 		mult *= 16;
 		--len;
 	}
@@ -1615,7 +1615,10 @@ static int snd_riptide_playback_open(struct snd_pcm_substream *substream)
 
 	chip->playback_substream[sub_num] = substream;
 	runtime->hw = snd_riptide_playback;
+
 	data = kzalloc(sizeof(struct pcmhw), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
 	data->paths = lbus_play_paths[sub_num];
 	data->id = play_ids[sub_num];
 	data->source = play_sources[sub_num];
@@ -1635,7 +1638,10 @@ static int snd_riptide_capture_open(struct snd_pcm_substream *substream)
 
 	chip->capture_substream = substream;
 	runtime->hw = snd_riptide_capture;
+
 	data = kzalloc(sizeof(struct pcmhw), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
 	data->paths = lbus_rec_path;
 	data->id = PADC;
 	data->source = ACLNK2PADC;
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index 9cc1b5aa014..1b8f6742b5f 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -264,11 +264,13 @@ static void sis_update_voice(struct voice *voice)
 		 * if using small periods.
 		 *
 		 * If we're less than 9 samples behind, we're on target.
+		 * Otherwise, shorten the next vperiod by the amount we've
+		 * been delayed.
 		 */
 		if (sync > -9)
 			voice->vperiod = voice->sync_period_size + 1;
 		else
-			voice->vperiod = voice->sync_period_size - 4;
+			voice->vperiod = voice->sync_period_size + sync + 10;
 
 		if (voice->vperiod < voice->buffer_size) {
 			sis_update_sso(voice, voice->vperiod);
@@ -736,7 +738,7 @@ static void sis_prepare_timing_voice(struct voice *voice,
 	period_size = buffer_size;
 
 	/* Initially, we want to interrupt just a bit behind the end of
-	 * the period we're clocking out. 10 samples seems to give a good
+	 * the period we're clocking out. 12 samples seems to give a good
 	 * delay.
 	 *
 	 * We want to spread our interrupts throughout the virtual period,
@@ -747,7 +749,7 @@ static void sis_prepare_timing_voice(struct voice *voice,
 	 *
 	 * This is all moot if we don't need to use virtual periods.
 	 */
-	vperiod = runtime->period_size + 10;
+	vperiod = runtime->period_size + 12;
 	if (vperiod > period_size) {
 		u16 tail = vperiod % period_size;
 		u16 quarter_period = period_size / 4;
@@ -776,7 +778,7 @@ static void sis_prepare_timing_voice(struct voice *voice,
 	 */
 	timing->flags |= VOICE_SYNC_TIMING;
 	timing->sync_base = voice->ctrl_base;
-	timing->sync_cso = runtime->period_size - 1;
+	timing->sync_cso = runtime->period_size;
 	timing->sync_period_size = runtime->period_size;
 	timing->sync_buffer_size = runtime->buffer_size;
 	timing->period_size = period_size;
@@ -1047,7 +1049,7 @@ static int sis_chip_free(struct sis7019 *sis)
 	/* Reset the chip, and disable all interrputs.
 	 */
 	outl(SIS_GCR_SOFTWARE_RESET, sis->ioport + SIS_GCR);
-	udelay(10);
+	udelay(25);
 	outl(0, sis->ioport + SIS_GCR);
 	outl(0, sis->ioport + SIS_GIER);
 
@@ -1083,7 +1085,7 @@ static int sis_chip_init(struct sis7019 *sis)
 	/* Reset the audio controller
 	 */
 	outl(SIS_GCR_SOFTWARE_RESET, io + SIS_GCR);
-	udelay(10);
+	udelay(25);
 	outl(0, io + SIS_GCR);
 
 	/* Get the AC-link semaphore, and reset the codecs
@@ -1096,7 +1098,7 @@ static int sis_chip_init(struct sis7019 *sis)
 		return -EIO;
 
 	outl(SIS_AC97_CMD_CODEC_COLD_RESET, io + SIS_AC97_CMD);
-	udelay(10);
+	udelay(250);
 
 	count = 0xffff;
 	while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count)
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 7e494b6a1d0..8c5f8b5a59f 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -85,6 +85,7 @@ static int joystick;
 static int ac97_clock = 48000;
 static char *ac97_quirk;
 static int dxs_support;
+static int dxs_init_volume = 31;
 static int nodelay;
 
 module_param(index, int, 0444);
@@ -103,6 +104,8 @@ module_param(ac97_quirk, charp, 0444);
 MODULE_PARM_DESC(ac97_quirk, "AC'97 workaround for strange hardware.");
 module_param(dxs_support, int, 0444);
 MODULE_PARM_DESC(dxs_support, "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA, 5 = enable any sample rate)");
+module_param(dxs_init_volume, int, 0644);
+MODULE_PARM_DESC(dxs_init_volume, "initial DXS volume (0-31)");
 module_param(nodelay, int, 0444);
 MODULE_PARM_DESC(nodelay, "Disable 500ms init delay");
 
@@ -1245,8 +1248,10 @@ static int snd_via8233_playback_open(struct snd_pcm_substream *substream)
 		return err;
 	stream = viadev->reg_offset / 0x10;
 	if (chip->dxs_controls[stream]) {
-		chip->playback_volume[stream][0] = 0;
-		chip->playback_volume[stream][1] = 0;
+		chip->playback_volume[stream][0] =
+				VIA_DXS_MAX_VOLUME - (dxs_init_volume & 31);
+		chip->playback_volume[stream][1] =
+				VIA_DXS_MAX_VOLUME - (dxs_init_volume & 31);
 		chip->dxs_controls[stream]->vd[0].access &=
 			~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
 		snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE |
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index df110df52a8..7ab9174a8a8 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -139,8 +139,8 @@ static int snd_pdacf_probe(struct pcmcia_device *link)
 	pdacf->p_dev = link;
 	link->priv = pdacf;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.NumPorts1 = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	link->resource[0]->end = 16;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -219,7 +219,7 @@ static int pdacf_config(struct pcmcia_device *link)
 	snd_printdd(KERN_DEBUG "pdacf_config called\n");
 	link->conf.ConfigIndex = 0x5;
 
-	ret = pcmcia_request_io(link, &link->io);
+	ret = pcmcia_request_io(link);
 	if (ret)
 		goto failed;
 
@@ -231,7 +231,8 @@ static int pdacf_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0)
+	if (snd_pdacf_assign_resources(pdacf, link->resource[0]->start,
+					link->irq) < 0)
 		goto failed;
 
 	return 0;
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.h b/sound/pcmcia/pdaudiocf/pdaudiocf.h
index a0a7ec64222..5cc3e457307 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.h
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.h
@@ -24,7 +24,6 @@
 #include <sound/pcm.h>
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 624b47a85f0..a6edfc3be29 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -159,8 +159,8 @@ static int snd_vxpocket_new(struct snd_card *card, int ibl,
 	vxp->p_dev = link;
 	link->priv = chip;
 
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.NumPorts1 = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	link->resource[0]->end = 16;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -226,7 +226,7 @@ static int vxpocket_config(struct pcmcia_device *link)
 		strcpy(chip->card->driver, vxp440_hw.name);
 	}
 
-	ret = pcmcia_request_io(link, &link->io);
+	ret = pcmcia_request_io(link);
 	if (ret)
 		goto failed;
 
@@ -241,7 +241,8 @@ static int vxpocket_config(struct pcmcia_device *link)
 	chip->dev = &link->dev;
 	snd_card_set_dev(chip->card, chip->dev);
 
-	if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0)
+	if (snd_vxpocket_assign_resources(chip, link->resource[0]->start,
+						link->irq) < 0)
 		goto failed;
 
 	return 0;
diff --git a/sound/pcmcia/vx/vxpocket.h b/sound/pcmcia/vx/vxpocket.h
index ea4df16a28e..d9110669d04 100644
--- a/sound/pcmcia/vx/vxpocket.h
+++ b/sound/pcmcia/vx/vxpocket.h
@@ -23,7 +23,6 @@
 
 #include <sound/vx_core.h>
 
-#include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
index b1749bc6797..3e598e756e5 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -28,9 +28,13 @@ source "sound/soc/atmel/Kconfig"
 source "sound/soc/au1x/Kconfig"
 source "sound/soc/blackfin/Kconfig"
 source "sound/soc/davinci/Kconfig"
+source "sound/soc/ep93xx/Kconfig"
 source "sound/soc/fsl/Kconfig"
 source "sound/soc/imx/Kconfig"
+source "sound/soc/jz4740/Kconfig"
+source "sound/soc/nuc900/Kconfig"
 source "sound/soc/omap/Kconfig"
+source "sound/soc/kirkwood/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"
 source "sound/soc/s6000/Kconfig"
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 1470141d416..eb183443eee 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -6,9 +6,13 @@ obj-$(CONFIG_SND_SOC)	+= atmel/
 obj-$(CONFIG_SND_SOC)	+= au1x/
 obj-$(CONFIG_SND_SOC)	+= blackfin/
 obj-$(CONFIG_SND_SOC)	+= davinci/
+obj-$(CONFIG_SND_SOC)	+= ep93xx/
 obj-$(CONFIG_SND_SOC)	+= fsl/
 obj-$(CONFIG_SND_SOC)   += imx/
+obj-$(CONFIG_SND_SOC)	+= jz4740/
+obj-$(CONFIG_SND_SOC)	+= nuc900/
 obj-$(CONFIG_SND_SOC)	+= omap/
+obj-$(CONFIG_SND_SOC)	+= kirkwood/
 obj-$(CONFIG_SND_SOC)	+= pxa/
 obj-$(CONFIG_SND_SOC)	+= s3c24xx/
 obj-$(CONFIG_SND_SOC)	+= s6000/
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
index f6b3cc04b34..dc5249fba85 100644
--- a/sound/soc/atmel/atmel-pcm.c
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -77,7 +77,6 @@ struct atmel_runtime_data {
 	size_t period_size;
 
 	dma_addr_t period_ptr;		/* physical address of next period */
-	int periods;			/* period index of period_ptr */
 
 	/* PDC register save */
 	u32 pdc_xpr_save;
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 0b59806905d..c85844d4845 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -549,7 +549,6 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
 		printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
 			ssc_p->daifmt);
 		return -EINVAL;
-		break;
 	}
 	pr_debug("atmel_ssc_hw_params: "
 			"RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index a61ccd2d505..d14a5a91a46 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -375,12 +375,10 @@ static int __devinit au1xpsc_ac97_drvprobe(struct platform_device *pdev)
 	}
 
 	ret = -EBUSY;
-	wd->ioarea = request_mem_region(r->start, r->end - r->start + 1,
-					"au1xpsc_ac97");
-	if (!wd->ioarea)
+	if (!request_mem_region(r->start, resource_size(r), pdev->name))
 		goto out0;
 
-	wd->mmio = ioremap(r->start, 0xffff);
+	wd->mmio = ioremap(r->start, resource_size(r));
 	if (!wd->mmio)
 		goto out1;
 
@@ -410,8 +408,7 @@ static int __devinit au1xpsc_ac97_drvprobe(struct platform_device *pdev)
 
 	snd_soc_unregister_dai(&au1xpsc_ac97_dai);
 out1:
-	release_resource(wd->ioarea);
-	kfree(wd->ioarea);
+	release_mem_region(r->start, resource_size(r));
 out0:
 	kfree(wd);
 	return ret;
@@ -420,6 +417,7 @@ out0:
 static int __devexit au1xpsc_ac97_drvremove(struct platform_device *pdev)
 {
 	struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	if (wd->dmapd)
 		au1xpsc_pcm_destroy(wd->dmapd);
@@ -433,8 +431,7 @@ static int __devexit au1xpsc_ac97_drvremove(struct platform_device *pdev)
 	au_sync();
 
 	iounmap(wd->mmio);
-	release_resource(wd->ioarea);
-	kfree(wd->ioarea);
+	release_mem_region(r->start, resource_size(r));
 	kfree(wd);
 
 	au1xpsc_ac97_workdata = NULL;	/* MDEV */
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index 24454c98d0e..6083fe7799f 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -321,12 +321,10 @@ static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
 	}
 
 	ret = -EBUSY;
-	wd->ioarea = request_mem_region(r->start, r->end - r->start + 1,
-					"au1xpsc_i2s");
-	if (!wd->ioarea)
+	if (!request_mem_region(r->start, resource_size(r), pdev->name))
 		goto out0;
 
-	wd->mmio = ioremap(r->start, 0xffff);
+	wd->mmio = ioremap(r->start, resource_size(r));
 	if (!wd->mmio)
 		goto out1;
 
@@ -362,8 +360,7 @@ static int __devinit au1xpsc_i2s_drvprobe(struct platform_device *pdev)
 
 	snd_soc_unregister_dai(&au1xpsc_i2s_dai);
 out1:
-	release_resource(wd->ioarea);
-	kfree(wd->ioarea);
+	release_mem_region(r->start, resource_size(r));
 out0:
 	kfree(wd);
 	return ret;
@@ -372,6 +369,7 @@ out0:
 static int __devexit au1xpsc_i2s_drvremove(struct platform_device *pdev)
 {
 	struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
 	if (wd->dmapd)
 		au1xpsc_pcm_destroy(wd->dmapd);
@@ -384,8 +382,7 @@ static int __devexit au1xpsc_i2s_drvremove(struct platform_device *pdev)
 	au_sync();
 
 	iounmap(wd->mmio);
-	release_resource(wd->ioarea);
-	kfree(wd->ioarea);
+	release_mem_region(r->start, resource_size(r));
 	kfree(wd);
 
 	au1xpsc_i2s_workdata = NULL;	/* MDEV */
diff --git a/sound/soc/au1x/psc.h b/sound/soc/au1x/psc.h
index 32d3807d3f5..093775d4dc3 100644
--- a/sound/soc/au1x/psc.h
+++ b/sound/soc/au1x/psc.h
@@ -32,7 +32,6 @@ struct au1xpsc_audio_data {
 	unsigned long rate;
 
 	unsigned long pm[2];
-	struct resource *ioarea;
 	struct mutex lock;
 	struct platform_device *dmapd;
 };
diff --git a/sound/soc/blackfin/bf5xx-ac97.c b/sound/soc/blackfin/bf5xx-ac97.c
index 523b7fc33f4..c0eba510998 100644
--- a/sound/soc/blackfin/bf5xx-ac97.c
+++ b/sound/soc/blackfin/bf5xx-ac97.c
@@ -255,8 +255,7 @@ EXPORT_SYMBOL_GPL(soc_ac97_ops);
 #ifdef CONFIG_PM
 static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
 {
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
+	struct sport_device *sport = dai->private_data;
 
 	pr_debug("%s : sport %d\n", __func__, dai->id);
 	if (!dai->active)
@@ -271,8 +270,7 @@ static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
 static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
 {
 	int ret;
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
+	struct sport_device *sport = dai->private_data;
 
 	pr_debug("%s : sport %d\n", __func__, dai->id);
 	if (!dai->active)
diff --git a/sound/soc/blackfin/bf5xx-tdm.c b/sound/soc/blackfin/bf5xx-tdm.c
index 4b360124083..24c14269f4b 100644
--- a/sound/soc/blackfin/bf5xx-tdm.c
+++ b/sound/soc/blackfin/bf5xx-tdm.c
@@ -210,8 +210,7 @@ static int bf5xx_tdm_set_channel_map(struct snd_soc_dai *dai,
 #ifdef CONFIG_PM
 static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
 {
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
+	struct sport_device *sport = dai->private_data;
 
 	if (!dai->active)
 		return 0;
@@ -225,8 +224,7 @@ static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
 static int bf5xx_tdm_resume(struct snd_soc_dai *dai)
 {
 	int ret;
-	struct sport_device *sport =
-		(struct sport_device *)dai->private_data;
+	struct sport_device *sport = dai->private_data;
 
 	if (!dai->active)
 		return 0;
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 5da30eb6ad0..83f5c67d3c4 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -22,9 +22,11 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_AK4642 if I2C
 	select SND_SOC_AK4671 if I2C
 	select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
+	select SND_SOC_CS42L51 if I2C
 	select SND_SOC_CS4270 if I2C
-	select SND_SOC_MAX9877 if I2C
 	select SND_SOC_DA7210 if I2C
+	select SND_SOC_JZ4740 if SOC_JZ4740
+	select SND_SOC_MAX9877 if I2C
 	select SND_SOC_PCM3008
 	select SND_SOC_SPDIF
 	select SND_SOC_SSM2602 if I2C
@@ -48,6 +50,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_WM8727
 	select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
+	select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI
@@ -120,13 +123,13 @@ config SND_SOC_AK4671
 config SND_SOC_CQ0093VC
 	tristate
 
+config SND_SOC_CS42L51
+	tristate
+
 # Cirrus Logic CS4270 Codec
 config SND_SOC_CS4270
 	tristate
 
-config SND_SOC_DA7210
-        tristate
-
 # Cirrus Logic CS4270 Codec VD = 3.3V Errata
 # Select if you are affected by the errata where the part will not function
 # if MCLK divide-by-1.5 is selected and VD is set to 3.3V.  The driver will
@@ -138,9 +141,15 @@ config SND_SOC_CS4270_VD33_ERRATA
 config SND_SOC_CX20442
 	tristate
 
+config SND_SOC_JZ4740_CODEC
+	tristate
+
 config SND_SOC_L3
        tristate
 
+config SND_SOC_DA7210
+        tristate
+
 config SND_SOC_PCM3008
        tristate
 
@@ -206,6 +215,9 @@ config SND_SOC_WM8728
 config SND_SOC_WM8731
 	tristate
 
+config SND_SOC_WM8741
+	tristate
+
 config SND_SOC_WM8750
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 91429eab070..53524095759 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -9,6 +9,7 @@ snd-soc-ak4535-objs := ak4535.o
 snd-soc-ak4642-objs := ak4642.o
 snd-soc-ak4671-objs := ak4671.o
 snd-soc-cq93vc-objs := cq93vc.o
+snd-soc-cs42l51-objs := cs42l51.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o
@@ -34,6 +35,7 @@ snd-soc-wm8711-objs := wm8711.o
 snd-soc-wm8727-objs := wm8727.o
 snd-soc-wm8728-objs := wm8728.o
 snd-soc-wm8731-objs := wm8731.o
+snd-soc-wm8741-objs := wm8741.o
 snd-soc-wm8750-objs := wm8750.o
 snd-soc-wm8753-objs := wm8753.o
 snd-soc-wm8776-objs := wm8776.o
@@ -56,6 +58,7 @@ snd-soc-wm9705-objs := wm9705.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
 snd-soc-wm-hubs-objs := wm_hubs.o
+snd-soc-jz4740-codec-objs := jz4740.o
 
 # Amp
 snd-soc-max9877-objs := max9877.o
@@ -74,10 +77,12 @@ obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_AK4642)	+= snd-soc-ak4642.o
 obj-$(CONFIG_SND_SOC_AK4671)	+= snd-soc-ak4671.o
 obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o
+obj-$(CONFIG_SND_SOC_CS42L51)	+= snd-soc-cs42l51.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
+obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_PCM3008)	+= snd-soc-pcm3008.o
 obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
@@ -99,6 +104,7 @@ obj-$(CONFIG_SND_SOC_WM8711)	+= snd-soc-wm8711.o
 obj-$(CONFIG_SND_SOC_WM8727)	+= snd-soc-wm8727.o
 obj-$(CONFIG_SND_SOC_WM8728)	+= snd-soc-wm8728.o
 obj-$(CONFIG_SND_SOC_WM8731)	+= snd-soc-wm8731.o
+obj-$(CONFIG_SND_SOC_WM8741)	+= snd-soc-wm8741.o
 obj-$(CONFIG_SND_SOC_WM8750)	+= snd-soc-wm8750.o
 obj-$(CONFIG_SND_SOC_WM8753)	+= snd-soc-wm8753.o
 obj-$(CONFIG_SND_SOC_WM8776)	+= snd-soc-wm8776.o
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
index 21753842322..a01006c8c60 100644
--- a/sound/soc/codecs/ad1836.c
+++ b/sound/soc/codecs/ad1836.c
@@ -272,6 +272,7 @@ static int ad1836_register(struct ad1836_priv *ad1836)
 
 	if (ad1836_codec) {
 		dev_err(codec->dev, "Another ad1836 is registered\n");
+		kfree(ad1836);
 		return -EINVAL;
 	}
 
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index c8ca1142b2f..1def75e4862 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -24,6 +24,7 @@
 
 /* codec private data */
 struct ad193x_priv {
+	unsigned int sysclk;
 	struct snd_soc_codec codec;
 	u8 reg_cache[AD193X_NUM_REGS];
 };
@@ -251,15 +252,32 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
+static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
+	switch (freq) {
+	case 12288000:
+	case 18432000:
+	case 24576000:
+	case 36864000:
+		ad193x->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
 static int ad193x_hw_params(struct snd_pcm_substream *substream,
 		struct snd_pcm_hw_params *params,
 		struct snd_soc_dai *dai)
 {
-	int word_len = 0, reg = 0;
+	int word_len = 0, reg = 0, master_rate = 0;
 
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
 
 	/* bit size */
 	switch (params_format(params)) {
@@ -275,6 +293,25 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
+	switch (ad193x->sysclk) {
+	case 12288000:
+		master_rate = AD193X_PLL_INPUT_256;
+		break;
+	case 18432000:
+		master_rate = AD193X_PLL_INPUT_384;
+		break;
+	case 24576000:
+		master_rate = AD193X_PLL_INPUT_512;
+		break;
+	case 36864000:
+		master_rate = AD193X_PLL_INPUT_768;
+		break;
+	}
+
+	reg = snd_soc_read(codec, AD193X_PLL_CLK_CTRL0);
+	reg = (reg & AD193X_PLL_INPUT_MASK) | master_rate;
+	snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
+
 	reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
 	reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len;
 	snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
@@ -348,6 +385,7 @@ static int ad193x_bus_probe(struct device *dev, void *ctrl_data, int bus_type)
 	/* pll input: mclki/xi */
 	snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */
 	snd_soc_write(codec, AD193X_PLL_CLK_CTRL1, 0x04);
+	ad193x->sysclk = 12288000;
 
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
@@ -383,6 +421,7 @@ static struct snd_soc_dai_ops ad193x_dai_ops = {
 	.hw_params = ad193x_hw_params,
 	.digital_mute = ad193x_mute,
 	.set_tdm_slot = ad193x_set_tdm_slot,
+	.set_sysclk	= ad193x_set_dai_sysclk,
 	.set_fmt = ad193x_set_dai_fmt,
 };
 
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
index a03c880d52f..654ba64ae04 100644
--- a/sound/soc/codecs/ad193x.h
+++ b/sound/soc/codecs/ad193x.h
@@ -11,6 +11,11 @@
 
 #define AD193X_PLL_CLK_CTRL0    0x800
 #define AD193X_PLL_POWERDOWN           0x01
+#define AD193X_PLL_INPUT_MASK   (~0x6)
+#define AD193X_PLL_INPUT_256    (0 << 1)
+#define AD193X_PLL_INPUT_384    (1 << 1)
+#define AD193X_PLL_INPUT_512    (2 << 1)
+#define AD193X_PLL_INPUT_768    (3 << 1)
 #define AD193X_PLL_CLK_CTRL1    0x801
 #define AD193X_DAC_CTRL0        0x802
 #define AD193X_DAC_POWERDOWN           0x01
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index 7528a54102b..3d7dc55305e 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -22,20 +22,13 @@
  * AK4643 is tested.
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
+#include <sound/tlv.h>
 
 #include "ak4642.h"
 
@@ -111,6 +104,23 @@
 
 struct snd_soc_codec_device soc_codec_dev_ak4642;
 
+/*
+ * Playback Volume (table 39)
+ *
+ * max : 0x00 : +12.0 dB
+ *       ( 0.5 dB step )
+ * min : 0xFE : -115.0 dB
+ * mute: 0xFF
+ */
+static const DECLARE_TLV_DB_SCALE(out_tlv, -11500, 50, 1);
+
+static const struct snd_kcontrol_new ak4642_snd_controls[] = {
+
+	SOC_DOUBLE_R_TLV("Digital Playback Volume", L_DVC, R_DVC,
+			 0, 0xFF, 1, out_tlv),
+};
+
+
 /* codec private data */
 struct ak4642_priv {
 	struct snd_soc_codec codec;
@@ -204,7 +214,6 @@ static int ak4642_dai_startup(struct snd_pcm_substream *substream,
 		 *
 		 * PLL, Master Mode
 		 * Audio I/F Format :MSB justified (ADC & DAC)
-		 * Digital Volume: -8dB
 		 * Bass Boost Level : Middle
 		 *
 		 * This operation came from example code of
@@ -214,8 +223,6 @@ static int ak4642_dai_startup(struct snd_pcm_substream *substream,
 		ak4642_write(codec, 0x0e, 0x19);
 		ak4642_write(codec, 0x09, 0x91);
 		ak4642_write(codec, 0x0c, 0x91);
-		ak4642_write(codec, 0x0a, 0x28);
-		ak4642_write(codec, 0x0d, 0x28);
 		ak4642_write(codec, 0x00, 0x64);
 		snd_soc_update_bits(codec, PW_MGMT2, PMHP_MASK,	PMHP);
 		snd_soc_update_bits(codec, PW_MGMT2, HPMTN,	HPMTN);
@@ -491,8 +498,10 @@ static int ak4642_i2c_probe(struct i2c_client *i2c,
 	codec->control_data = i2c;
 
 	ret = ak4642_init(ak4642);
-	if (ret < 0)
+	if (ret < 0) {
 		printk(KERN_ERR "failed to initialise AK4642\n");
+		kfree(ak4642);
+	}
 
 	return ret;
 }
@@ -548,6 +557,9 @@ static int ak4642_probe(struct platform_device *pdev)
 		goto pcm_err;
 	}
 
+	snd_soc_add_controls(ak4642_codec, ak4642_snd_controls,
+			     ARRAY_SIZE(ak4642_snd_controls));
+
 	dev_info(&pdev->dev, "AK4642 Audio Codec %s", AK4642_VERSION);
 	return ret;
 
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
new file mode 100644
index 00000000000..dd9b8550c40
--- /dev/null
+++ b/sound/soc/codecs/cs42l51.c
@@ -0,0 +1,763 @@
+/*
+ * cs42l51.c
+ *
+ * ASoC Driver for Cirrus Logic CS42L51 codecs
+ *
+ * Copyright (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ * Based on cs4270.c - Copyright (c) Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * For now:
+ *  - Only I2C is support. Not SPI
+ *  - master mode *NOT* supported
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/pcm.h>
+#include <linux/i2c.h>
+
+#include "cs42l51.h"
+
+enum master_slave_mode {
+	MODE_SLAVE,
+	MODE_SLAVE_AUTO,
+	MODE_MASTER,
+};
+
+struct cs42l51_private {
+	unsigned int mclk;
+	unsigned int audio_mode;	/* The mode (I2S or left-justified) */
+	enum master_slave_mode func;
+	struct snd_soc_codec codec;
+	u8 reg_cache[CS42L51_NUMREGS];
+};
+
+static struct snd_soc_codec *cs42l51_codec;
+
+#define CS42L51_FORMATS ( \
+		SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S16_BE  | \
+		SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \
+		SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \
+		SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S24_BE)
+
+static int cs42l51_fill_cache(struct snd_soc_codec *codec)
+{
+	u8 *cache = codec->reg_cache + 1;
+	struct i2c_client *i2c_client = codec->control_data;
+	s32 length;
+
+	length = i2c_smbus_read_i2c_block_data(i2c_client,
+			CS42L51_FIRSTREG | 0x80, CS42L51_NUMREGS, cache);
+	if (length != CS42L51_NUMREGS) {
+		dev_err(&i2c_client->dev,
+				"I2C read failure, addr=0x%x (ret=%d vs %d)\n",
+				i2c_client->addr, length, CS42L51_NUMREGS);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cs42l51_i2c_probe(struct i2c_client *i2c_client,
+	const struct i2c_device_id *id)
+{
+	struct snd_soc_codec *codec;
+	struct cs42l51_private *cs42l51;
+	int ret = 0;
+	int reg;
+
+	if (cs42l51_codec)
+		return -EBUSY;
+
+	/* Verify that we have a CS42L51 */
+	ret = i2c_smbus_read_byte_data(i2c_client, CS42L51_CHIP_REV_ID);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "failed to read I2C\n");
+		goto error;
+	}
+
+	if ((ret != CS42L51_MK_CHIP_REV(CS42L51_CHIP_ID, CS42L51_CHIP_REV_A)) &&
+	    (ret != CS42L51_MK_CHIP_REV(CS42L51_CHIP_ID, CS42L51_CHIP_REV_B))) {
+		dev_err(&i2c_client->dev, "Invalid chip id\n");
+		ret = -ENODEV;
+		goto error;
+	}
+
+	dev_info(&i2c_client->dev, "found device cs42l51 rev %d\n",
+				ret & 7);
+
+	cs42l51 = kzalloc(sizeof(struct cs42l51_private), GFP_KERNEL);
+	if (!cs42l51) {
+		dev_err(&i2c_client->dev, "could not allocate codec\n");
+		return -ENOMEM;
+	}
+	codec = &cs42l51->codec;
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->dev = &i2c_client->dev;
+	codec->name = "CS42L51";
+	codec->owner = THIS_MODULE;
+	codec->dai = &cs42l51_dai;
+	codec->num_dai = 1;
+	snd_soc_codec_set_drvdata(codec, cs42l51);
+
+	codec->control_data = i2c_client;
+	codec->reg_cache = cs42l51->reg_cache;
+	codec->reg_cache_size = CS42L51_NUMREGS;
+	i2c_set_clientdata(i2c_client, codec);
+
+	ret = cs42l51_fill_cache(codec);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "failed to fill register cache\n");
+		goto error_alloc;
+	}
+
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "Failed to set cache I/O: %d\n", ret);
+		goto error_alloc;
+	}
+
+	/*
+	 * DAC configuration
+	 * - Use signal processor
+	 * - auto mute
+	 * - vol changes immediate
+	 * - no de-emphasize
+	 */
+	reg = CS42L51_DAC_CTL_DATA_SEL(1)
+		| CS42L51_DAC_CTL_AMUTE | CS42L51_DAC_CTL_DACSZ(0);
+	ret = snd_soc_write(codec, CS42L51_DAC_CTL, reg);
+	if (ret < 0)
+		goto error_alloc;
+
+	cs42l51_dai.dev = codec->dev;
+	cs42l51_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto error_alloc;
+	}
+
+	ret = snd_soc_register_dai(&cs42l51_dai);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "failed to register DAIe\n");
+		goto error_reg;
+	}
+
+	return 0;
+
+error_reg:
+	snd_soc_unregister_codec(codec);
+error_alloc:
+	kfree(cs42l51);
+error:
+	return ret;
+}
+
+static int cs42l51_i2c_remove(struct i2c_client *client)
+{
+	struct cs42l51_private *cs42l51 = i2c_get_clientdata(client);
+	snd_soc_unregister_dai(&cs42l51_dai);
+	snd_soc_unregister_codec(cs42l51_codec);
+	cs42l51_codec = NULL;
+	kfree(cs42l51);
+	return 0;
+}
+
+
+static const struct i2c_device_id cs42l51_id[] = {
+	{"cs42l51", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs42l51_id);
+
+static struct i2c_driver cs42l51_i2c_driver = {
+	.driver = {
+		.name = "CS42L51 I2C",
+		.owner = THIS_MODULE,
+	},
+	.id_table = cs42l51_id,
+	.probe = cs42l51_i2c_probe,
+	.remove = cs42l51_i2c_remove,
+};
+
+static int cs42l51_get_chan_mix(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned long value = snd_soc_read(codec, CS42L51_PCM_MIXER)&3;
+
+	switch (value) {
+	default:
+	case 0:
+		ucontrol->value.integer.value[0] = 0;
+		break;
+	/* same value : (L+R)/2 and (R+L)/2 */
+	case 1:
+	case 2:
+		ucontrol->value.integer.value[0] = 1;
+		break;
+	case 3:
+		ucontrol->value.integer.value[0] = 2;
+		break;
+	}
+
+	return 0;
+}
+
+#define CHAN_MIX_NORMAL	0x00
+#define CHAN_MIX_BOTH	0x55
+#define CHAN_MIX_SWAP	0xFF
+
+static int cs42l51_set_chan_mix(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned char val;
+
+	switch (ucontrol->value.integer.value[0]) {
+	default:
+	case 0:
+		val = CHAN_MIX_NORMAL;
+		break;
+	case 1:
+		val = CHAN_MIX_BOTH;
+		break;
+	case 2:
+		val = CHAN_MIX_SWAP;
+		break;
+	}
+
+	snd_soc_write(codec, CS42L51_PCM_MIXER, val);
+
+	return 1;
+}
+
+static const DECLARE_TLV_DB_SCALE(adc_pcm_tlv, -5150, 50, 0);
+static const DECLARE_TLV_DB_SCALE(tone_tlv, -1050, 150, 0);
+/* This is a lie. after -102 db, it stays at -102 */
+/* maybe a range would be better */
+static const DECLARE_TLV_DB_SCALE(aout_tlv, -11550, 50, 0);
+
+static const DECLARE_TLV_DB_SCALE(boost_tlv, 1600, 1600, 0);
+static const char *chan_mix[] = {
+	"L R",
+	"L+R",
+	"R L",
+};
+
+static const struct soc_enum cs42l51_chan_mix =
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(chan_mix), chan_mix);
+
+static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
+	SOC_DOUBLE_R_SX_TLV("PCM Playback Volume",
+			CS42L51_PCMA_VOL, CS42L51_PCMB_VOL,
+			7, 0xffffff99, 0x18, adc_pcm_tlv),
+	SOC_DOUBLE_R("PCM Playback Switch",
+			CS42L51_PCMA_VOL, CS42L51_PCMB_VOL, 7, 1, 1),
+	SOC_DOUBLE_R_SX_TLV("Analog Playback Volume",
+			CS42L51_AOUTA_VOL, CS42L51_AOUTB_VOL,
+			8, 0xffffff19, 0x18, aout_tlv),
+	SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume",
+			CS42L51_ADCA_VOL, CS42L51_ADCB_VOL,
+			7, 0xffffff99, 0x18, adc_pcm_tlv),
+	SOC_DOUBLE_R("ADC Mixer Switch",
+			CS42L51_ADCA_VOL, CS42L51_ADCB_VOL, 7, 1, 1),
+	SOC_SINGLE("Playback Deemphasis Switch", CS42L51_DAC_CTL, 3, 1, 0),
+	SOC_SINGLE("Auto-Mute Switch", CS42L51_DAC_CTL, 2, 1, 0),
+	SOC_SINGLE("Soft Ramp Switch", CS42L51_DAC_CTL, 1, 1, 0),
+	SOC_SINGLE("Zero Cross Switch", CS42L51_DAC_CTL, 0, 0, 0),
+	SOC_DOUBLE_TLV("Mic Boost Volume",
+			CS42L51_MIC_CTL, 0, 1, 1, 0, boost_tlv),
+	SOC_SINGLE_TLV("Bass Volume", CS42L51_TONE_CTL, 0, 0xf, 1, tone_tlv),
+	SOC_SINGLE_TLV("Treble Volume", CS42L51_TONE_CTL, 4, 0xf, 1, tone_tlv),
+	SOC_ENUM_EXT("PCM channel mixer",
+			cs42l51_chan_mix,
+			cs42l51_get_chan_mix, cs42l51_set_chan_mix),
+};
+
+/*
+ * to power down, one must:
+ * 1.) Enable the PDN bit
+ * 2.) enable power-down for the select channels
+ * 3.) disable the PDN bit.
+ */
+static int cs42l51_pdn_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	unsigned long value;
+
+	value = snd_soc_read(w->codec, CS42L51_POWER_CTL1);
+	value &= ~CS42L51_POWER_CTL1_PDN;
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMD:
+		value |= CS42L51_POWER_CTL1_PDN;
+		break;
+	default:
+	case SND_SOC_DAPM_POST_PMD:
+		break;
+	}
+	snd_soc_update_bits(w->codec, CS42L51_POWER_CTL1,
+		CS42L51_POWER_CTL1_PDN, value);
+
+	return 0;
+}
+
+static const char *cs42l51_dac_names[] = {"Direct PCM",
+	"DSP PCM", "ADC"};
+static const struct soc_enum cs42l51_dac_mux_enum =
+	SOC_ENUM_SINGLE(CS42L51_DAC_CTL, 6, 3, cs42l51_dac_names);
+static const struct snd_kcontrol_new cs42l51_dac_mux_controls =
+	SOC_DAPM_ENUM("Route", cs42l51_dac_mux_enum);
+
+static const char *cs42l51_adcl_names[] = {"AIN1 Left", "AIN2 Left",
+	"MIC Left", "MIC+preamp Left"};
+static const struct soc_enum cs42l51_adcl_mux_enum =
+	SOC_ENUM_SINGLE(CS42L51_ADC_INPUT, 4, 4, cs42l51_adcl_names);
+static const struct snd_kcontrol_new cs42l51_adcl_mux_controls =
+	SOC_DAPM_ENUM("Route", cs42l51_adcl_mux_enum);
+
+static const char *cs42l51_adcr_names[] = {"AIN1 Right", "AIN2 Right",
+	"MIC Right", "MIC+preamp Right"};
+static const struct soc_enum cs42l51_adcr_mux_enum =
+	SOC_ENUM_SINGLE(CS42L51_ADC_INPUT, 6, 4, cs42l51_adcr_names);
+static const struct snd_kcontrol_new cs42l51_adcr_mux_controls =
+	SOC_DAPM_ENUM("Route", cs42l51_adcr_mux_enum);
+
+static const struct snd_soc_dapm_widget cs42l51_dapm_widgets[] = {
+	SND_SOC_DAPM_MICBIAS("Mic Bias", CS42L51_MIC_POWER_CTL, 1, 1),
+	SND_SOC_DAPM_PGA_E("Left PGA", CS42L51_POWER_CTL1, 3, 1, NULL, 0,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_PGA_E("Right PGA", CS42L51_POWER_CTL1, 4, 1, NULL, 0,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_ADC_E("Left ADC", "Left HiFi Capture",
+		CS42L51_POWER_CTL1, 1, 1,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_ADC_E("Right ADC", "Right HiFi Capture",
+		CS42L51_POWER_CTL1, 2, 1,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_DAC_E("Left DAC", "Left HiFi Playback",
+		CS42L51_POWER_CTL1, 5, 1,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_DAC_E("Right DAC", "Right HiFi Playback",
+		CS42L51_POWER_CTL1, 6, 1,
+		cs42l51_pdn_event, SND_SOC_DAPM_PRE_POST_PMD),
+
+	/* analog/mic */
+	SND_SOC_DAPM_INPUT("AIN1L"),
+	SND_SOC_DAPM_INPUT("AIN1R"),
+	SND_SOC_DAPM_INPUT("AIN2L"),
+	SND_SOC_DAPM_INPUT("AIN2R"),
+	SND_SOC_DAPM_INPUT("MICL"),
+	SND_SOC_DAPM_INPUT("MICR"),
+
+	SND_SOC_DAPM_MIXER("Mic Preamp Left",
+		CS42L51_MIC_POWER_CTL, 2, 1, NULL, 0),
+	SND_SOC_DAPM_MIXER("Mic Preamp Right",
+		CS42L51_MIC_POWER_CTL, 3, 1, NULL, 0),
+
+	/* HP */
+	SND_SOC_DAPM_OUTPUT("HPL"),
+	SND_SOC_DAPM_OUTPUT("HPR"),
+
+	/* mux */
+	SND_SOC_DAPM_MUX("DAC Mux", SND_SOC_NOPM, 0, 0,
+		&cs42l51_dac_mux_controls),
+	SND_SOC_DAPM_MUX("PGA-ADC Mux Left", SND_SOC_NOPM, 0, 0,
+		&cs42l51_adcl_mux_controls),
+	SND_SOC_DAPM_MUX("PGA-ADC Mux Right", SND_SOC_NOPM, 0, 0,
+		&cs42l51_adcr_mux_controls),
+};
+
+static const struct snd_soc_dapm_route cs42l51_routes[] = {
+	{"HPL", NULL, "Left DAC"},
+	{"HPR", NULL, "Right DAC"},
+
+	{"Left ADC", NULL, "Left PGA"},
+	{"Right ADC", NULL, "Right PGA"},
+
+	{"Mic Preamp Left",  NULL,  "MICL"},
+	{"Mic Preamp Right", NULL,  "MICR"},
+
+	{"PGA-ADC Mux Left",  "AIN1 Left",        "AIN1L" },
+	{"PGA-ADC Mux Left",  "AIN2 Left",        "AIN2L" },
+	{"PGA-ADC Mux Left",  "MIC Left",         "MICL"  },
+	{"PGA-ADC Mux Left",  "MIC+preamp Left",  "Mic Preamp Left" },
+	{"PGA-ADC Mux Right", "AIN1 Right",       "AIN1R" },
+	{"PGA-ADC Mux Right", "AIN2 Right",       "AIN2R" },
+	{"PGA-ADC Mux Right", "MIC Right",        "MICR" },
+	{"PGA-ADC Mux Right", "MIC+preamp Right", "Mic Preamp Right" },
+
+	{"Left PGA", NULL, "PGA-ADC Mux Left"},
+	{"Right PGA", NULL, "PGA-ADC Mux Right"},
+};
+
+static int cs42l51_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int format)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct cs42l51_private *cs42l51 = snd_soc_codec_get_drvdata(codec);
+	int ret = 0;
+
+	switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_LEFT_J:
+	case SND_SOC_DAIFMT_RIGHT_J:
+		cs42l51->audio_mode = format & SND_SOC_DAIFMT_FORMAT_MASK;
+		break;
+	default:
+		dev_err(codec->dev, "invalid DAI format\n");
+		ret = -EINVAL;
+	}
+
+	switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		cs42l51->func = MODE_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		cs42l51->func = MODE_SLAVE_AUTO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+struct cs42l51_ratios {
+	unsigned int ratio;
+	unsigned char speed_mode;
+	unsigned char mclk;
+};
+
+static struct cs42l51_ratios slave_ratios[] = {
+	{  512, CS42L51_QSM_MODE, 0 }, {  768, CS42L51_QSM_MODE, 0 },
+	{ 1024, CS42L51_QSM_MODE, 0 }, { 1536, CS42L51_QSM_MODE, 0 },
+	{ 2048, CS42L51_QSM_MODE, 0 }, { 3072, CS42L51_QSM_MODE, 0 },
+	{  256, CS42L51_HSM_MODE, 0 }, {  384, CS42L51_HSM_MODE, 0 },
+	{  512, CS42L51_HSM_MODE, 0 }, {  768, CS42L51_HSM_MODE, 0 },
+	{ 1024, CS42L51_HSM_MODE, 0 }, { 1536, CS42L51_HSM_MODE, 0 },
+	{  128, CS42L51_SSM_MODE, 0 }, {  192, CS42L51_SSM_MODE, 0 },
+	{  256, CS42L51_SSM_MODE, 0 }, {  384, CS42L51_SSM_MODE, 0 },
+	{  512, CS42L51_SSM_MODE, 0 }, {  768, CS42L51_SSM_MODE, 0 },
+	{  128, CS42L51_DSM_MODE, 0 }, {  192, CS42L51_DSM_MODE, 0 },
+	{  256, CS42L51_DSM_MODE, 0 }, {  384, CS42L51_DSM_MODE, 0 },
+};
+
+static struct cs42l51_ratios slave_auto_ratios[] = {
+	{ 1024, CS42L51_QSM_MODE, 0 }, { 1536, CS42L51_QSM_MODE, 0 },
+	{ 2048, CS42L51_QSM_MODE, 1 }, { 3072, CS42L51_QSM_MODE, 1 },
+	{  512, CS42L51_HSM_MODE, 0 }, {  768, CS42L51_HSM_MODE, 0 },
+	{ 1024, CS42L51_HSM_MODE, 1 }, { 1536, CS42L51_HSM_MODE, 1 },
+	{  256, CS42L51_SSM_MODE, 0 }, {  384, CS42L51_SSM_MODE, 0 },
+	{  512, CS42L51_SSM_MODE, 1 }, {  768, CS42L51_SSM_MODE, 1 },
+	{  128, CS42L51_DSM_MODE, 0 }, {  192, CS42L51_DSM_MODE, 0 },
+	{  256, CS42L51_DSM_MODE, 1 }, {  384, CS42L51_DSM_MODE, 1 },
+};
+
+static int cs42l51_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct cs42l51_private *cs42l51 = snd_soc_codec_get_drvdata(codec);
+	struct cs42l51_ratios *ratios = NULL;
+	int nr_ratios = 0;
+	unsigned int rates = 0;
+	unsigned int rate_min = -1;
+	unsigned int rate_max = 0;
+	int i;
+
+	cs42l51->mclk = freq;
+
+	switch (cs42l51->func) {
+	case MODE_MASTER:
+		return -EINVAL;
+	case MODE_SLAVE:
+		ratios = slave_ratios;
+		nr_ratios = ARRAY_SIZE(slave_ratios);
+		break;
+	case MODE_SLAVE_AUTO:
+		ratios = slave_auto_ratios;
+		nr_ratios = ARRAY_SIZE(slave_auto_ratios);
+		break;
+	}
+
+	for (i = 0; i < nr_ratios; i++) {
+		unsigned int rate = freq / ratios[i].ratio;
+		rates |= snd_pcm_rate_to_rate_bit(rate);
+		if (rate < rate_min)
+			rate_min = rate;
+		if (rate > rate_max)
+			rate_max = rate;
+	}
+	rates &= ~SNDRV_PCM_RATE_KNOT;
+
+	if (!rates) {
+		dev_err(codec->dev, "could not find a valid sample rate\n");
+		return -EINVAL;
+	}
+
+	codec_dai->playback.rates = rates;
+	codec_dai->playback.rate_min = rate_min;
+	codec_dai->playback.rate_max = rate_max;
+
+	codec_dai->capture.rates = rates;
+	codec_dai->capture.rate_min = rate_min;
+	codec_dai->capture.rate_max = rate_max;
+
+	return 0;
+}
+
+static int cs42l51_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params,
+		struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct cs42l51_private *cs42l51 = snd_soc_codec_get_drvdata(codec);
+	int ret;
+	unsigned int i;
+	unsigned int rate;
+	unsigned int ratio;
+	struct cs42l51_ratios *ratios = NULL;
+	int nr_ratios = 0;
+	int intf_ctl, power_ctl, fmt;
+
+	switch (cs42l51->func) {
+	case MODE_MASTER:
+		return -EINVAL;
+	case MODE_SLAVE:
+		ratios = slave_ratios;
+		nr_ratios = ARRAY_SIZE(slave_ratios);
+		break;
+	case MODE_SLAVE_AUTO:
+		ratios = slave_auto_ratios;
+		nr_ratios = ARRAY_SIZE(slave_auto_ratios);
+		break;
+	}
+
+	/* Figure out which MCLK/LRCK ratio to use */
+	rate = params_rate(params);     /* Sampling rate, in Hz */
+	ratio = cs42l51->mclk / rate;    /* MCLK/LRCK ratio */
+	for (i = 0; i < nr_ratios; i++) {
+		if (ratios[i].ratio == ratio)
+			break;
+	}
+
+	if (i == nr_ratios) {
+		/* We did not find a matching ratio */
+		dev_err(codec->dev, "could not find matching ratio\n");
+		return -EINVAL;
+	}
+
+	intf_ctl = snd_soc_read(codec, CS42L51_INTF_CTL);
+	power_ctl = snd_soc_read(codec, CS42L51_MIC_POWER_CTL);
+
+	intf_ctl &= ~(CS42L51_INTF_CTL_MASTER | CS42L51_INTF_CTL_ADC_I2S
+			| CS42L51_INTF_CTL_DAC_FORMAT(7));
+	power_ctl &= ~(CS42L51_MIC_POWER_CTL_SPEED(3)
+			| CS42L51_MIC_POWER_CTL_MCLK_DIV2);
+
+	switch (cs42l51->func) {
+	case MODE_MASTER:
+		intf_ctl |= CS42L51_INTF_CTL_MASTER;
+		power_ctl |= CS42L51_MIC_POWER_CTL_SPEED(ratios[i].speed_mode);
+		break;
+	case MODE_SLAVE:
+		power_ctl |= CS42L51_MIC_POWER_CTL_SPEED(ratios[i].speed_mode);
+		break;
+	case MODE_SLAVE_AUTO:
+		power_ctl |= CS42L51_MIC_POWER_CTL_AUTO;
+		break;
+	}
+
+	switch (cs42l51->audio_mode) {
+	case SND_SOC_DAIFMT_I2S:
+		intf_ctl |= CS42L51_INTF_CTL_ADC_I2S;
+		intf_ctl |= CS42L51_INTF_CTL_DAC_FORMAT(CS42L51_DAC_DIF_I2S);
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		intf_ctl |= CS42L51_INTF_CTL_DAC_FORMAT(CS42L51_DAC_DIF_LJ24);
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		switch (params_format(params)) {
+		case SNDRV_PCM_FORMAT_S16_LE:
+		case SNDRV_PCM_FORMAT_S16_BE:
+			fmt = CS42L51_DAC_DIF_RJ16;
+			break;
+		case SNDRV_PCM_FORMAT_S18_3LE:
+		case SNDRV_PCM_FORMAT_S18_3BE:
+			fmt = CS42L51_DAC_DIF_RJ18;
+			break;
+		case SNDRV_PCM_FORMAT_S20_3LE:
+		case SNDRV_PCM_FORMAT_S20_3BE:
+			fmt = CS42L51_DAC_DIF_RJ20;
+			break;
+		case SNDRV_PCM_FORMAT_S24_LE:
+		case SNDRV_PCM_FORMAT_S24_BE:
+			fmt = CS42L51_DAC_DIF_RJ24;
+			break;
+		default:
+			dev_err(codec->dev, "unknown format\n");
+			return -EINVAL;
+		}
+		intf_ctl |= CS42L51_INTF_CTL_DAC_FORMAT(fmt);
+		break;
+	default:
+		dev_err(codec->dev, "unknown format\n");
+		return -EINVAL;
+	}
+
+	if (ratios[i].mclk)
+		power_ctl |= CS42L51_MIC_POWER_CTL_MCLK_DIV2;
+
+	ret = snd_soc_write(codec, CS42L51_INTF_CTL, intf_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_write(codec, CS42L51_MIC_POWER_CTL, power_ctl);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cs42l51_dai_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	int reg;
+	int mask = CS42L51_DAC_OUT_CTL_DACA_MUTE|CS42L51_DAC_OUT_CTL_DACB_MUTE;
+
+	reg = snd_soc_read(codec, CS42L51_DAC_OUT_CTL);
+
+	if (mute)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	return snd_soc_write(codec, CS42L51_DAC_OUT_CTL, reg);
+}
+
+static struct snd_soc_dai_ops cs42l51_dai_ops = {
+	.hw_params      = cs42l51_hw_params,
+	.set_sysclk     = cs42l51_set_dai_sysclk,
+	.set_fmt        = cs42l51_set_dai_fmt,
+	.digital_mute   = cs42l51_dai_mute,
+};
+
+struct snd_soc_dai cs42l51_dai = {
+	.name = "CS42L51 HiFi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.formats = CS42L51_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.formats = CS42L51_FORMATS,
+	},
+	.ops = &cs42l51_dai_ops,
+};
+EXPORT_SYMBOL_GPL(cs42l51_dai);
+
+
+static int cs42l51_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (!cs42l51_codec) {
+		dev_err(&pdev->dev, "CS42L51 codec not yet registered\n");
+		return -EINVAL;
+	}
+
+	socdev->card->codec = cs42l51_codec;
+	codec = socdev->card->codec;
+
+	/* Register PCMs */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to create PCMs\n");
+		return ret;
+	}
+
+	snd_soc_add_controls(codec, cs42l51_snd_controls,
+		ARRAY_SIZE(cs42l51_snd_controls));
+	snd_soc_dapm_new_controls(codec, cs42l51_dapm_widgets,
+		ARRAY_SIZE(cs42l51_dapm_widgets));
+	snd_soc_dapm_add_routes(codec, cs42l51_routes,
+		ARRAY_SIZE(cs42l51_routes));
+
+	return 0;
+}
+
+
+static int cs42l51_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_device_cs42l51 = {
+	.probe =	cs42l51_probe,
+	.remove =	cs42l51_remove
+};
+EXPORT_SYMBOL_GPL(soc_codec_device_cs42l51);
+
+static int __init cs42l51_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&cs42l51_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "%s: can't add i2c driver\n", __func__);
+		return ret;
+	}
+	return 0;
+}
+module_init(cs42l51_init);
+
+static void __exit cs42l51_exit(void)
+{
+	i2c_del_driver(&cs42l51_i2c_driver);
+}
+module_exit(cs42l51_exit);
+
+MODULE_AUTHOR("Arnaud Patard <apatard@mandriva.com>");
+MODULE_DESCRIPTION("Cirrus Logic CS42L51 ALSA SoC Codec Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/cs42l51.h b/sound/soc/codecs/cs42l51.h
new file mode 100644
index 00000000000..8f0bd9786ad
--- /dev/null
+++ b/sound/soc/codecs/cs42l51.h
@@ -0,0 +1,163 @@
+/*
+ * cs42l51.h
+ *
+ * ASoC Driver for Cirrus Logic CS42L51 codecs
+ *
+ * Copyright (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _CS42L51_H
+#define _CS42L51_H
+
+#define CS42L51_CHIP_ID			0x1B
+#define CS42L51_CHIP_REV_A		0x00
+#define CS42L51_CHIP_REV_B		0x01
+
+#define CS42L51_CHIP_REV_ID		0x01
+#define CS42L51_MK_CHIP_REV(a, b)	((a)<<3|(b))
+
+#define CS42L51_POWER_CTL1		0x02
+#define CS42L51_POWER_CTL1_PDN_DACB	(1<<6)
+#define CS42L51_POWER_CTL1_PDN_DACA	(1<<5)
+#define CS42L51_POWER_CTL1_PDN_PGAB	(1<<4)
+#define CS42L51_POWER_CTL1_PDN_PGAA	(1<<3)
+#define CS42L51_POWER_CTL1_PDN_ADCB	(1<<2)
+#define CS42L51_POWER_CTL1_PDN_ADCA	(1<<1)
+#define CS42L51_POWER_CTL1_PDN		(1<<0)
+
+#define CS42L51_MIC_POWER_CTL		0x03
+#define CS42L51_MIC_POWER_CTL_AUTO	(1<<7)
+#define CS42L51_MIC_POWER_CTL_SPEED(x)	(((x)&3)<<5)
+#define CS42L51_QSM_MODE		3
+#define CS42L51_HSM_MODE		2
+#define	CS42L51_SSM_MODE		1
+#define CS42L51_DSM_MODE		0
+#define CS42L51_MIC_POWER_CTL_3ST_SP	(1<<4)
+#define CS42L51_MIC_POWER_CTL_PDN_MICB	(1<<3)
+#define CS42L51_MIC_POWER_CTL_PDN_MICA	(1<<2)
+#define CS42L51_MIC_POWER_CTL_PDN_BIAS	(1<<1)
+#define CS42L51_MIC_POWER_CTL_MCLK_DIV2	(1<<0)
+
+#define CS42L51_INTF_CTL		0x04
+#define CS42L51_INTF_CTL_LOOPBACK	(1<<7)
+#define CS42L51_INTF_CTL_MASTER		(1<<6)
+#define CS42L51_INTF_CTL_DAC_FORMAT(x)	(((x)&7)<<3)
+#define CS42L51_DAC_DIF_LJ24		0x00
+#define CS42L51_DAC_DIF_I2S		0x01
+#define CS42L51_DAC_DIF_RJ24		0x02
+#define CS42L51_DAC_DIF_RJ20		0x03
+#define CS42L51_DAC_DIF_RJ18		0x04
+#define CS42L51_DAC_DIF_RJ16		0x05
+#define CS42L51_INTF_CTL_ADC_I2S	(1<<2)
+#define CS42L51_INTF_CTL_DIGMIX		(1<<1)
+#define CS42L51_INTF_CTL_MICMIX		(1<<0)
+
+#define CS42L51_MIC_CTL			0x05
+#define CS42L51_MIC_CTL_ADC_SNGVOL	(1<<7)
+#define CS42L51_MIC_CTL_ADCD_DBOOST	(1<<6)
+#define CS42L51_MIC_CTL_ADCA_DBOOST	(1<<5)
+#define CS42L51_MIC_CTL_MICBIAS_SEL	(1<<4)
+#define CS42L51_MIC_CTL_MICBIAS_LVL(x)	(((x)&3)<<2)
+#define CS42L51_MIC_CTL_MICB_BOOST	(1<<1)
+#define CS42L51_MIC_CTL_MICA_BOOST	(1<<0)
+
+#define CS42L51_ADC_CTL			0x06
+#define CS42L51_ADC_CTL_ADCB_HPFEN	(1<<7)
+#define CS42L51_ADC_CTL_ADCB_HPFRZ	(1<<6)
+#define CS42L51_ADC_CTL_ADCA_HPFEN	(1<<5)
+#define CS42L51_ADC_CTL_ADCA_HPFRZ	(1<<4)
+#define CS42L51_ADC_CTL_SOFTB		(1<<3)
+#define CS42L51_ADC_CTL_ZCROSSB		(1<<2)
+#define CS42L51_ADC_CTL_SOFTA		(1<<1)
+#define CS42L51_ADC_CTL_ZCROSSA		(1<<0)
+
+#define CS42L51_ADC_INPUT		0x07
+#define CS42L51_ADC_INPUT_AINB_MUX(x)	(((x)&3)<<6)
+#define CS42L51_ADC_INPUT_AINA_MUX(x)	(((x)&3)<<4)
+#define CS42L51_ADC_INPUT_INV_ADCB	(1<<3)
+#define CS42L51_ADC_INPUT_INV_ADCA	(1<<2)
+#define CS42L51_ADC_INPUT_ADCB_MUTE	(1<<1)
+#define CS42L51_ADC_INPUT_ADCA_MUTE	(1<<0)
+
+#define CS42L51_DAC_OUT_CTL		0x08
+#define CS42L51_DAC_OUT_CTL_HP_GAIN(x)	(((x)&7)<<5)
+#define CS42L51_DAC_OUT_CTL_DAC_SNGVOL	(1<<4)
+#define CS42L51_DAC_OUT_CTL_INV_PCMB	(1<<3)
+#define CS42L51_DAC_OUT_CTL_INV_PCMA	(1<<2)
+#define CS42L51_DAC_OUT_CTL_DACB_MUTE	(1<<1)
+#define CS42L51_DAC_OUT_CTL_DACA_MUTE	(1<<0)
+
+#define CS42L51_DAC_CTL			0x09
+#define CS42L51_DAC_CTL_DATA_SEL(x)	(((x)&3)<<6)
+#define CS42L51_DAC_CTL_FREEZE		(1<<5)
+#define CS42L51_DAC_CTL_DEEMPH		(1<<3)
+#define CS42L51_DAC_CTL_AMUTE		(1<<2)
+#define CS42L51_DAC_CTL_DACSZ(x)	(((x)&3)<<0)
+
+#define CS42L51_ALC_PGA_CTL		0x0A
+#define CS42L51_ALC_PGB_CTL		0x0B
+#define CS42L51_ALC_PGX_ALCX_SRDIS	(1<<7)
+#define CS42L51_ALC_PGX_ALCX_ZCDIS	(1<<6)
+#define CS42L51_ALC_PGX_PGX_VOL(x)	(((x)&0x1f)<<0)
+
+#define CS42L51_ADCA_ATT		0x0C
+#define CS42L51_ADCB_ATT		0x0D
+
+#define CS42L51_ADCA_VOL		0x0E
+#define CS42L51_ADCB_VOL		0x0F
+#define CS42L51_PCMA_VOL		0x10
+#define CS42L51_PCMB_VOL		0x11
+#define CS42L51_MIX_MUTE_ADCMIX		(1<<7)
+#define CS42L51_MIX_VOLUME(x)		(((x)&0x7f)<<0)
+
+#define CS42L51_BEEP_FREQ		0x12
+#define CS42L51_BEEP_VOL		0x13
+#define CS42L51_BEEP_CONF		0x14
+
+#define CS42L51_TONE_CTL		0x15
+#define CS42L51_TONE_CTL_TREB(x)	(((x)&0xf)<<4)
+#define CS42L51_TONE_CTL_BASS(x)	(((x)&0xf)<<0)
+
+#define CS42L51_AOUTA_VOL		0x16
+#define CS42L51_AOUTB_VOL		0x17
+#define CS42L51_PCM_MIXER		0x18
+#define CS42L51_LIMIT_THRES_DIS		0x19
+#define CS42L51_LIMIT_REL		0x1A
+#define CS42L51_LIMIT_ATT		0x1B
+#define CS42L51_ALC_EN			0x1C
+#define CS42L51_ALC_REL			0x1D
+#define CS42L51_ALC_THRES		0x1E
+#define CS42L51_NOISE_CONF		0x1F
+
+#define CS42L51_STATUS			0x20
+#define CS42L51_STATUS_SP_CLKERR	(1<<6)
+#define CS42L51_STATUS_SPEA_OVFL	(1<<5)
+#define CS42L51_STATUS_SPEB_OVFL	(1<<4)
+#define CS42L51_STATUS_PCMA_OVFL	(1<<3)
+#define CS42L51_STATUS_PCMB_OVFL	(1<<2)
+#define CS42L51_STATUS_ADCA_OVFL	(1<<1)
+#define CS42L51_STATUS_ADCB_OVFL	(1<<0)
+
+#define CS42L51_CHARGE_FREQ		0x21
+
+#define CS42L51_FIRSTREG	0x01
+/*
+ * Hack: with register 0x21, it makes 33 registers. Looks like someone in the
+ * i2c layer doesn't like i2c smbus block read of 33 regs. Workaround by using
+ * 32 regs
+ */
+#define CS42L51_LASTREG		0x20
+#define CS42L51_NUMREGS		(CS42L51_LASTREG - CS42L51_FIRSTREG + 1)
+
+extern struct snd_soc_dai cs42l51_dai;
+extern struct snd_soc_codec_device soc_codec_device_cs42l51;
+#endif
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 75af2d6e0e7..3c51d6a5752 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -15,23 +15,15 @@
  * option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
-#include <sound/soc.h>
 #include <sound/soc-dapm.h>
-#include <sound/tlv.h>
 #include <sound/initval.h>
-#include <asm/div64.h>
+#include <sound/tlv.h>
 
 #include "da7210.h"
 
@@ -145,6 +137,29 @@
 
 #define DA7210_VERSION "0.0.1"
 
+/*
+ * Playback Volume
+ *
+ * max		: 0x3F (+15.0 dB)
+ *		   (1.5 dB step)
+ * min		: 0x11 (-54.0 dB)
+ * mute		: 0x10
+ * reserved	: 0x00 - 0x0F
+ *
+ * ** FIXME **
+ *
+ * Reserved area are considered as "mute".
+ * -> min = -79.5 dB
+ */
+static const DECLARE_TLV_DB_SCALE(hp_out_tlv, -7950, 150, 1);
+
+static const struct snd_kcontrol_new da7210_snd_controls[] = {
+
+	SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
+			 DA7210_HP_L_VOL, DA7210_HP_R_VOL,
+			 0, 0x3F, 0, hp_out_tlv),
+};
+
 /* Codec private data */
 struct da7210_priv {
 	struct snd_soc_codec codec;
@@ -227,10 +242,6 @@ static int da7210_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = dai->codec;
 
 	if (is_play) {
-		/* PlayBack Volume 40 */
-		snd_soc_update_bits(codec, DA7210_HP_L_VOL, 0x3F, 40);
-		snd_soc_update_bits(codec, DA7210_HP_R_VOL, 0x3F, 40);
-
 		/* Enable Out */
 		snd_soc_update_bits(codec, DA7210_OUTMIX_L, 0x1F, 0x10);
 		snd_soc_update_bits(codec, DA7210_OUTMIX_R, 0x1F, 0x10);
@@ -488,7 +499,7 @@ static int da7210_init(struct da7210_priv *da7210)
 	ret = snd_soc_register_dai(&da7210_dai);
 	if (ret) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		goto init_err;
+		goto codec_err;
 	}
 
 	/* FIXME
@@ -574,6 +585,8 @@ static int da7210_init(struct da7210_priv *da7210)
 
 	return ret;
 
+codec_err:
+	snd_soc_unregister_codec(codec);
 init_err:
 	kfree(codec->reg_cache);
 	codec->reg_cache = NULL;
@@ -601,8 +614,10 @@ static int __devinit da7210_i2c_probe(struct i2c_client *i2c,
 	codec->control_data = i2c;
 
 	ret = da7210_init(da7210);
-	if (ret < 0)
+	if (ret < 0) {
 		pr_err("Failed to initialise da7210 audio codec\n");
+		kfree(da7210);
+	}
 
 	return ret;
 }
@@ -656,6 +671,9 @@ static int da7210_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto pcm_err;
 
+	snd_soc_add_controls(da7210_codec, da7210_snd_controls,
+			     ARRAY_SIZE(da7210_snd_controls));
+
 	dev_info(&pdev->dev, "DA7210 Audio Codec %s\n", DA7210_VERSION);
 
 pcm_err:
diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c
new file mode 100644
index 00000000000..66557de1e4f
--- /dev/null
+++ b/sound/soc/codecs/jz4740.c
@@ -0,0 +1,511 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc-dapm.h>
+#include <sound/soc.h>
+
+#define JZ4740_REG_CODEC_1 0x0
+#define JZ4740_REG_CODEC_2 0x1
+
+#define JZ4740_CODEC_1_LINE_ENABLE BIT(29)
+#define JZ4740_CODEC_1_MIC_ENABLE BIT(28)
+#define JZ4740_CODEC_1_SW1_ENABLE BIT(27)
+#define JZ4740_CODEC_1_ADC_ENABLE BIT(26)
+#define JZ4740_CODEC_1_SW2_ENABLE BIT(25)
+#define JZ4740_CODEC_1_DAC_ENABLE BIT(24)
+#define JZ4740_CODEC_1_VREF_DISABLE BIT(20)
+#define JZ4740_CODEC_1_VREF_AMP_DISABLE BIT(19)
+#define JZ4740_CODEC_1_VREF_PULLDOWN BIT(18)
+#define JZ4740_CODEC_1_VREF_LOW_CURRENT BIT(17)
+#define JZ4740_CODEC_1_VREF_HIGH_CURRENT BIT(16)
+#define JZ4740_CODEC_1_HEADPHONE_DISABLE BIT(14)
+#define JZ4740_CODEC_1_HEADPHONE_AMP_CHANGE_ANY BIT(13)
+#define JZ4740_CODEC_1_HEADPHONE_CHARGE BIT(12)
+#define JZ4740_CODEC_1_HEADPHONE_PULLDOWN (BIT(11) | BIT(10))
+#define JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M BIT(9)
+#define JZ4740_CODEC_1_HEADPHONE_POWERDOWN BIT(8)
+#define JZ4740_CODEC_1_SUSPEND BIT(1)
+#define JZ4740_CODEC_1_RESET BIT(0)
+
+#define JZ4740_CODEC_1_LINE_ENABLE_OFFSET 29
+#define JZ4740_CODEC_1_MIC_ENABLE_OFFSET 28
+#define JZ4740_CODEC_1_SW1_ENABLE_OFFSET 27
+#define JZ4740_CODEC_1_ADC_ENABLE_OFFSET 26
+#define JZ4740_CODEC_1_SW2_ENABLE_OFFSET 25
+#define JZ4740_CODEC_1_DAC_ENABLE_OFFSET 24
+#define JZ4740_CODEC_1_HEADPHONE_DISABLE_OFFSET 14
+#define JZ4740_CODEC_1_HEADPHONE_POWERDOWN_OFFSET 8
+
+#define JZ4740_CODEC_2_INPUT_VOLUME_MASK		0x1f0000
+#define JZ4740_CODEC_2_SAMPLE_RATE_MASK			0x000f00
+#define JZ4740_CODEC_2_MIC_BOOST_GAIN_MASK		0x000030
+#define JZ4740_CODEC_2_HEADPHONE_VOLUME_MASK	0x000003
+
+#define JZ4740_CODEC_2_INPUT_VOLUME_OFFSET		16
+#define JZ4740_CODEC_2_SAMPLE_RATE_OFFSET		 8
+#define JZ4740_CODEC_2_MIC_BOOST_GAIN_OFFSET	 4
+#define JZ4740_CODEC_2_HEADPHONE_VOLUME_OFFSET	 0
+
+static const uint32_t jz4740_codec_regs[] = {
+	0x021b2302, 0x00170803,
+};
+
+struct jz4740_codec {
+	void __iomem *base;
+	struct resource *mem;
+
+	uint32_t reg_cache[2];
+	struct snd_soc_codec codec;
+};
+
+static inline struct jz4740_codec *codec_to_jz4740(struct snd_soc_codec *codec)
+{
+	return container_of(codec, struct jz4740_codec, codec);
+}
+
+static unsigned int jz4740_codec_read(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	struct jz4740_codec *jz4740_codec = codec_to_jz4740(codec);
+	return readl(jz4740_codec->base + (reg << 2));
+}
+
+static int jz4740_codec_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int val)
+{
+	struct jz4740_codec *jz4740_codec = codec_to_jz4740(codec);
+
+	jz4740_codec->reg_cache[reg] = val;
+	writel(val, jz4740_codec->base + (reg << 2));
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new jz4740_codec_controls[] = {
+	SOC_SINGLE("Master Playback Volume", JZ4740_REG_CODEC_2,
+			JZ4740_CODEC_2_HEADPHONE_VOLUME_OFFSET, 3, 0),
+	SOC_SINGLE("Master Capture Volume", JZ4740_REG_CODEC_2,
+			JZ4740_CODEC_2_INPUT_VOLUME_OFFSET, 31, 0),
+	SOC_SINGLE("Master Playback Switch", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_HEADPHONE_DISABLE_OFFSET, 1, 1),
+	SOC_SINGLE("Mic Capture Volume", JZ4740_REG_CODEC_2,
+			JZ4740_CODEC_2_MIC_BOOST_GAIN_OFFSET, 3, 0),
+};
+
+static const struct snd_kcontrol_new jz4740_codec_output_controls[] = {
+	SOC_DAPM_SINGLE("Bypass Switch", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_SW1_ENABLE_OFFSET, 1, 0),
+	SOC_DAPM_SINGLE("DAC Switch", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_SW2_ENABLE_OFFSET, 1, 0),
+};
+
+static const struct snd_kcontrol_new jz4740_codec_input_controls[] = {
+	SOC_DAPM_SINGLE("Line Capture Switch", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_LINE_ENABLE_OFFSET, 1, 0),
+	SOC_DAPM_SINGLE("Mic Capture Switch", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_MIC_ENABLE_OFFSET, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget jz4740_codec_dapm_widgets[] = {
+	SND_SOC_DAPM_ADC("ADC", "Capture", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_ADC_ENABLE_OFFSET, 0),
+	SND_SOC_DAPM_DAC("DAC", "Playback", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_DAC_ENABLE_OFFSET, 0),
+
+	SND_SOC_DAPM_MIXER("Output Mixer", JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_HEADPHONE_POWERDOWN_OFFSET, 1,
+			jz4740_codec_output_controls,
+			ARRAY_SIZE(jz4740_codec_output_controls)),
+
+	SND_SOC_DAPM_MIXER_NAMED_CTL("Input Mixer", SND_SOC_NOPM, 0, 0,
+			jz4740_codec_input_controls,
+			ARRAY_SIZE(jz4740_codec_input_controls)),
+	SND_SOC_DAPM_MIXER("Line Input", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_OUTPUT("LOUT"),
+	SND_SOC_DAPM_OUTPUT("ROUT"),
+
+	SND_SOC_DAPM_INPUT("MIC"),
+	SND_SOC_DAPM_INPUT("LIN"),
+	SND_SOC_DAPM_INPUT("RIN"),
+};
+
+static const struct snd_soc_dapm_route jz4740_codec_dapm_routes[] = {
+	{"Line Input", NULL, "LIN"},
+	{"Line Input", NULL, "RIN"},
+
+	{"Input Mixer", "Line Capture Switch", "Line Input"},
+	{"Input Mixer", "Mic Capture Switch", "MIC"},
+
+	{"ADC", NULL, "Input Mixer"},
+
+	{"Output Mixer", "Bypass Switch", "Input Mixer"},
+	{"Output Mixer", "DAC Switch", "DAC"},
+
+	{"LOUT", NULL, "Output Mixer"},
+	{"ROUT", NULL, "Output Mixer"},
+};
+
+static int jz4740_codec_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	uint32_t val;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	switch (params_rate(params)) {
+	case 8000:
+		val = 0;
+		break;
+	case 11025:
+		val = 1;
+		break;
+	case 12000:
+		val = 2;
+		break;
+	case 16000:
+		val = 3;
+		break;
+	case 22050:
+		val = 4;
+		break;
+	case 24000:
+		val = 5;
+		break;
+	case 32000:
+		val = 6;
+		break;
+	case 44100:
+		val = 7;
+		break;
+	case 48000:
+		val = 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= JZ4740_CODEC_2_SAMPLE_RATE_OFFSET;
+
+	snd_soc_update_bits(codec, JZ4740_REG_CODEC_2,
+				JZ4740_CODEC_2_SAMPLE_RATE_MASK, val);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops jz4740_codec_dai_ops = {
+	.hw_params = jz4740_codec_hw_params,
+};
+
+struct snd_soc_dai jz4740_codec_dai = {
+	.name = "jz4740",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
+	},
+	.ops = &jz4740_codec_dai_ops,
+	.symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(jz4740_codec_dai);
+
+static void jz4740_codec_wakeup(struct snd_soc_codec *codec)
+{
+	int i;
+	uint32_t *cache = codec->reg_cache;
+
+	snd_soc_update_bits(codec, JZ4740_REG_CODEC_1,
+		JZ4740_CODEC_1_RESET, JZ4740_CODEC_1_RESET);
+	udelay(2);
+
+	snd_soc_update_bits(codec, JZ4740_REG_CODEC_1,
+		JZ4740_CODEC_1_SUSPEND | JZ4740_CODEC_1_RESET, 0);
+
+	for (i = 0; i < ARRAY_SIZE(jz4740_codec_regs); ++i)
+		jz4740_codec_write(codec, i, cache[i]);
+}
+
+static int jz4740_codec_set_bias_level(struct snd_soc_codec *codec,
+	enum snd_soc_bias_level level)
+{
+	unsigned int mask;
+	unsigned int value;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		mask = JZ4740_CODEC_1_VREF_DISABLE |
+				JZ4740_CODEC_1_VREF_AMP_DISABLE |
+				JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
+		value = 0;
+
+		snd_soc_update_bits(codec, JZ4740_REG_CODEC_1, mask, value);
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* The only way to clear the suspend flag is to reset the codec */
+		if (codec->bias_level == SND_SOC_BIAS_OFF)
+			jz4740_codec_wakeup(codec);
+
+		mask = JZ4740_CODEC_1_VREF_DISABLE |
+			JZ4740_CODEC_1_VREF_AMP_DISABLE |
+			JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
+		value = JZ4740_CODEC_1_VREF_DISABLE |
+			JZ4740_CODEC_1_VREF_AMP_DISABLE |
+			JZ4740_CODEC_1_HEADPHONE_POWERDOWN_M;
+
+		snd_soc_update_bits(codec, JZ4740_REG_CODEC_1, mask, value);
+		break;
+	case SND_SOC_BIAS_OFF:
+		mask = JZ4740_CODEC_1_SUSPEND;
+		value = JZ4740_CODEC_1_SUSPEND;
+
+		snd_soc_update_bits(codec, JZ4740_REG_CODEC_1, mask, value);
+		break;
+	default:
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static struct snd_soc_codec *jz4740_codec_codec;
+
+static int jz4740_codec_dev_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = jz4740_codec_codec;
+
+	BUG_ON(!codec);
+
+	socdev->card->codec = codec;
+
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create pcms: %d\n", ret);
+		return ret;
+	}
+
+	snd_soc_add_controls(codec, jz4740_codec_controls,
+		ARRAY_SIZE(jz4740_codec_controls));
+
+	snd_soc_dapm_new_controls(codec, jz4740_codec_dapm_widgets,
+		ARRAY_SIZE(jz4740_codec_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, jz4740_codec_dapm_routes,
+		ARRAY_SIZE(jz4740_codec_dapm_routes));
+
+	snd_soc_dapm_new_widgets(codec);
+
+	return 0;
+}
+
+static int jz4740_codec_dev_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int jz4740_codec_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	return jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int jz4740_codec_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	return jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+}
+
+#else
+#define jz4740_codec_suspend NULL
+#define jz4740_codec_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_jz4740_codec = {
+	.probe = jz4740_codec_dev_probe,
+	.remove = jz4740_codec_dev_remove,
+	.suspend = jz4740_codec_suspend,
+	.resume = jz4740_codec_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_jz4740_codec);
+
+static int __devinit jz4740_codec_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct jz4740_codec *jz4740_codec;
+	struct snd_soc_codec *codec;
+	struct resource *mem;
+
+	jz4740_codec = kzalloc(sizeof(*jz4740_codec), GFP_KERNEL);
+	if (!jz4740_codec)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
+		ret = -ENOENT;
+		goto err_free_codec;
+	}
+
+	mem = request_mem_region(mem->start, resource_size(mem), pdev->name);
+	if (!mem) {
+		dev_err(&pdev->dev, "Failed to request mmio memory region\n");
+		ret = -EBUSY;
+		goto err_free_codec;
+	}
+
+	jz4740_codec->base = ioremap(mem->start, resource_size(mem));
+	if (!jz4740_codec->base) {
+		dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
+		ret = -EBUSY;
+		goto err_release_mem_region;
+	}
+	jz4740_codec->mem = mem;
+
+	jz4740_codec_dai.dev = &pdev->dev;
+
+	codec = &jz4740_codec->codec;
+
+	codec->dev		= &pdev->dev;
+	codec->name		= "jz4740";
+	codec->owner		= THIS_MODULE;
+
+	codec->read		= jz4740_codec_read;
+	codec->write		= jz4740_codec_write;
+	codec->set_bias_level	= jz4740_codec_set_bias_level;
+	codec->bias_level	= SND_SOC_BIAS_OFF;
+
+	codec->dai		= &jz4740_codec_dai;
+	codec->num_dai		= 1;
+
+	codec->reg_cache	= jz4740_codec->reg_cache;
+	codec->reg_cache_size	= 2;
+	memcpy(codec->reg_cache, jz4740_codec_regs, sizeof(jz4740_codec_regs));
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	jz4740_codec_codec = codec;
+
+	snd_soc_update_bits(codec, JZ4740_REG_CODEC_1,
+			JZ4740_CODEC_1_SW2_ENABLE, JZ4740_CODEC_1_SW2_ENABLE);
+
+	platform_set_drvdata(pdev, jz4740_codec);
+
+	ret = snd_soc_register_codec(codec);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register codec\n");
+		goto err_iounmap;
+	}
+
+	ret = snd_soc_register_dai(&jz4740_codec_dai);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register codec dai\n");
+		goto err_unregister_codec;
+	}
+
+	jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+
+err_unregister_codec:
+	snd_soc_unregister_codec(codec);
+err_iounmap:
+	iounmap(jz4740_codec->base);
+err_release_mem_region:
+	release_mem_region(mem->start, resource_size(mem));
+err_free_codec:
+	kfree(jz4740_codec);
+
+	return ret;
+}
+
+static int __devexit jz4740_codec_remove(struct platform_device *pdev)
+{
+	struct jz4740_codec *jz4740_codec = platform_get_drvdata(pdev);
+	struct resource *mem = jz4740_codec->mem;
+
+	snd_soc_unregister_dai(&jz4740_codec_dai);
+	snd_soc_unregister_codec(&jz4740_codec->codec);
+
+	iounmap(jz4740_codec->base);
+	release_mem_region(mem->start, resource_size(mem));
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(jz4740_codec);
+
+	return 0;
+}
+
+static struct platform_driver jz4740_codec_driver = {
+	.probe = jz4740_codec_probe,
+	.remove = __devexit_p(jz4740_codec_remove),
+	.driver = {
+		.name = "jz4740-codec",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_codec_init(void)
+{
+	return platform_driver_register(&jz4740_codec_driver);
+}
+module_init(jz4740_codec_init);
+
+static void __exit jz4740_codec_exit(void)
+{
+	platform_driver_unregister(&jz4740_codec_driver);
+}
+module_exit(jz4740_codec_exit);
+
+MODULE_DESCRIPTION("JZ4740 SoC internal codec driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:jz4740-codec");
diff --git a/sound/soc/codecs/jz4740.h b/sound/soc/codecs/jz4740.h
new file mode 100644
index 00000000000..b5a0691be76
--- /dev/null
+++ b/sound/soc/codecs/jz4740.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __SND_SOC_CODECS_JZ4740_CODEC_H__
+#define __SND_SOC_CODECS_JZ4740_CODEC_H__
+
+extern struct snd_soc_dai jz4740_codec_dai;
+extern struct snd_soc_codec_device soc_codec_dev_jz4740_codec;
+
+#endif
diff --git a/sound/soc/codecs/spdif_transciever.c b/sound/soc/codecs/spdif_transciever.c
index a6319114105..9119836051a 100644
--- a/sound/soc/codecs/spdif_transciever.c
+++ b/sound/soc/codecs/spdif_transciever.c
@@ -16,8 +16,10 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/slab.h>
 #include <sound/soc.h>
 #include <sound/pcm.h>
+#include <sound/initval.h>
 
 #include "spdif_transciever.h"
 
@@ -26,6 +28,48 @@ MODULE_LICENSE("GPL");
 #define STUB_RATES	SNDRV_PCM_RATE_8000_96000
 #define STUB_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
 
+static struct snd_soc_codec *spdif_dit_codec;
+
+static int spdif_dit_codec_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret;
+
+	if (spdif_dit_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = spdif_dit_codec;
+	codec = spdif_dit_codec;
+
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto err_create_pcms;
+	}
+
+	return 0;
+
+err_create_pcms:
+	return ret;
+}
+
+static int spdif_dit_codec_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_spdif_dit = {
+	.probe		= spdif_dit_codec_probe,
+	.remove		= spdif_dit_codec_remove,
+}; EXPORT_SYMBOL_GPL(soc_codec_dev_spdif_dit);
+
 struct snd_soc_dai dit_stub_dai = {
 	.name		= "DIT",
 	.playback 	= {
@@ -40,13 +84,61 @@ EXPORT_SYMBOL_GPL(dit_stub_dai);
 
 static int spdif_dit_probe(struct platform_device *pdev)
 {
+	struct snd_soc_codec *codec;
+	int ret;
+
+	if (spdif_dit_codec) {
+		dev_err(&pdev->dev, "Another Codec is registered\n");
+		ret = -EINVAL;
+		goto err_reg_codec;
+	}
+
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	codec->dev = &pdev->dev;
+
+	mutex_init(&codec->mutex);
+
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->name = "spdif-dit";
+	codec->owner = THIS_MODULE;
+	codec->dai = &dit_stub_dai;
+	codec->num_dai = 1;
+
+	spdif_dit_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err_reg_codec;
+	}
+
 	dit_stub_dai.dev = &pdev->dev;
-	return snd_soc_register_dai(&dit_stub_dai);
+	ret = snd_soc_register_dai(&dit_stub_dai);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to register dai: %d\n", ret);
+		goto err_reg_dai;
+	}
+
+	return 0;
+
+err_reg_dai:
+	snd_soc_unregister_codec(codec);
+err_reg_codec:
+	kfree(spdif_dit_codec);
+	return ret;
 }
 
 static int spdif_dit_remove(struct platform_device *pdev)
 {
 	snd_soc_unregister_dai(&dit_stub_dai);
+	snd_soc_unregister_codec(spdif_dit_codec);
+	kfree(spdif_dit_codec);
+	spdif_dit_codec = NULL;
 	return 0;
 }
 
diff --git a/sound/soc/codecs/spdif_transciever.h b/sound/soc/codecs/spdif_transciever.h
index 296f2eb6c4e..1e102124f54 100644
--- a/sound/soc/codecs/spdif_transciever.h
+++ b/sound/soc/codecs/spdif_transciever.h
@@ -12,6 +12,7 @@
 #ifndef CODEC_STUBS_H
 #define CODEC_STUBS_H
 
+extern struct snd_soc_codec_device soc_codec_dev_spdif_dit;
 extern struct snd_soc_dai dit_stub_dai;
 
 #endif /* CODEC_STUBS_H */
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index b0bae3508b2..0a4b0fef335 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -560,13 +560,16 @@ static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec,
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		/* vref/mid, osc on, dac unmute */
+		reg &= ~(TLV320AIC23_DEVICE_PWR_OFF | TLV320AIC23_OSC_OFF | \
+			TLV320AIC23_DAC_OFF);
 		tlv320aic23_write(codec, TLV320AIC23_PWR, reg);
 		break;
 	case SND_SOC_BIAS_PREPARE:
 		break;
 	case SND_SOC_BIAS_STANDBY:
 		/* everything off except vref/vmid, */
-		tlv320aic23_write(codec, TLV320AIC23_PWR, reg | 0x0040);
+		tlv320aic23_write(codec, TLV320AIC23_PWR, reg | \
+			TLV320AIC23_CLK_OFF);
 		break;
 	case SND_SOC_BIAS_OFF:
 		/* everything off, dac mute, inactive */
@@ -615,7 +618,6 @@ static int tlv320aic23_suspend(struct platform_device *pdev,
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
 
-	tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0);
 	tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
 	return 0;
@@ -632,7 +634,6 @@ static int tlv320aic23_resume(struct platform_device *pdev)
 		u16 val = tlv320aic23_read_reg_cache(codec, reg);
 		tlv320aic23_write(codec, reg, val);
 	}
-
 	tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	return 0;
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
index 65adc77eada..8651b01ed22 100644
--- a/sound/soc/codecs/tlv320dac33.c
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -49,8 +49,6 @@
 
 #define NSAMPLE_MAX		5700
 
-#define LATENCY_TIME_MS		20
-
 #define MODE7_LTHR		10
 #define MODE7_UTHR		(DAC33_BUFFER_SIZE_SAMPLES - 10)
 
@@ -62,6 +60,9 @@
 #define US_TO_SAMPLES(rate, us) \
 	(rate / (1000000 / us))
 
+#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
+	((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))
+
 static void dac33_calculate_times(struct snd_pcm_substream *substream);
 static int dac33_prepare_chip(struct snd_pcm_substream *substream);
 
@@ -107,6 +108,10 @@ struct tlv320dac33_priv {
 					 * this */
 	enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */
 	unsigned int nsample;		/* burst read amount from host */
+	int mode1_latency;		/* latency caused by the i2c writes in
+					 * us */
+	int auto_fifo_config; 		/* Configure the FIFO based on the
+					 * period size */
 	u8 burst_bclkdiv;		/* BCLK divider value in burst mode */
 	unsigned int burst_rate;	/* Interface speed in Burst modes */
 
@@ -120,6 +125,8 @@ struct tlv320dac33_priv {
 					 * samples */
 	unsigned int mode7_us_to_lthr;	/* Time to reach lthr from uthr */
 
+	unsigned int uthr;
+
 	enum dac33_state state;
 };
 
@@ -442,6 +449,39 @@ static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
 	return ret;
 }
 
+static int dac33_get_uthr(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+
+	ucontrol->value.integer.value[0] = dac33->uthr;
+
+	return 0;
+}
+
+static int dac33_set_uthr(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+	int ret = 0;
+
+	if (dac33->substream)
+		return -EBUSY;
+
+	if (dac33->uthr == ucontrol->value.integer.value[0])
+		return 0;
+
+	if (ucontrol->value.integer.value[0] < (MODE7_LTHR + 10) ||
+	    ucontrol->value.integer.value[0] > MODE7_UTHR)
+		ret = -EINVAL;
+	else
+		dac33->uthr = ucontrol->value.integer.value[0];
+
+	return ret;
+}
+
 static int dac33_get_fifo_mode(struct snd_kcontrol *kcontrol,
 			 struct snd_ctl_elem_value *ucontrol)
 {
@@ -503,13 +543,18 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = {
 		 DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
 };
 
-static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
-	SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
-		 dac33_get_nsample, dac33_set_nsample),
+static const struct snd_kcontrol_new dac33_mode_snd_controls[] = {
 	SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum,
 		 dac33_get_fifo_mode, dac33_set_fifo_mode),
 };
 
+static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = {
+	SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
+		dac33_get_nsample, dac33_set_nsample),
+	SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0,
+		 dac33_get_uthr, dac33_set_uthr),
+};
+
 /* Analog bypass */
 static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
 	SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
@@ -612,7 +657,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33)
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
 		dac33_write16(codec, DAC33_NSAMPLE_MSB,
-			DAC33_THRREG(dac33->nsample + dac33->alarm_threshold));
+			DAC33_THRREG(dac33->nsample));
 
 		/* Take the timestamps */
 		spin_lock_irq(&dac33->lock);
@@ -761,6 +806,10 @@ static void dac33_shutdown(struct snd_pcm_substream *substream,
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
 
 	dac33->substream = NULL;
+
+	/* Reset the nSample restrictions */
+	dac33->nsample_min = 0;
+	dac33->nsample_max = NSAMPLE_MAX;
 }
 
 static int dac33_hw_params(struct snd_pcm_substream *substream,
@@ -985,7 +1034,7 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream)
 		 * Configure the threshold levels, and leave 10 sample space
 		 * at the bottom, and also at the top of the FIFO
 		 */
-		dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR));
+		dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(dac33->uthr));
 		dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR));
 		break;
 	default:
@@ -1003,57 +1052,71 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
+	unsigned int period_size = substream->runtime->period_size;
+	unsigned int rate = substream->runtime->rate;
 	unsigned int nsample_limit;
 
 	/* In bypass mode we don't need to calculate */
 	if (!dac33->fifo_mode)
 		return;
 
-	/* Number of samples (16bit, stereo) in one period */
-	dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4;
-
-	/* Number of samples (16bit, stereo) in ALSA buffer */
-	dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4;
-	/* Subtract one period from the total */
-	dac33->nsample_max -= dac33->nsample_min;
-
-	/* Number of samples for LATENCY_TIME_MS / 2 */
-	dac33->alarm_threshold = substream->runtime->rate /
-				 (1000 / (LATENCY_TIME_MS / 2));
-
-	/* Find and fix up the lowest nsmaple limit */
-	nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS);
-
-	if (dac33->nsample_min < nsample_limit)
-		dac33->nsample_min = nsample_limit;
-
-	if (dac33->nsample < dac33->nsample_min)
-		dac33->nsample = dac33->nsample_min;
-
-	/*
-	 * Find and fix up the highest nsmaple limit
-	 * In order to not overflow the DAC33 buffer substract the
-	 * alarm_threshold value from the size of the DAC33 buffer
-	 */
-	nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold;
-
-	if (dac33->nsample_max > nsample_limit)
-		dac33->nsample_max = nsample_limit;
-
-	if (dac33->nsample > dac33->nsample_max)
-		dac33->nsample = dac33->nsample_max;
-
 	switch (dac33->fifo_mode) {
 	case DAC33_FIFO_MODE1:
+		/* Number of samples under i2c latency */
+		dac33->alarm_threshold = US_TO_SAMPLES(rate,
+						dac33->mode1_latency);
+		if (dac33->auto_fifo_config) {
+			if (period_size <= dac33->alarm_threshold)
+				/*
+				 * Configure nSamaple to number of periods,
+				 * which covers the latency requironment.
+				 */
+				dac33->nsample = period_size *
+				       ((dac33->alarm_threshold / period_size) +
+				       (dac33->alarm_threshold % period_size ?
+				       1 : 0));
+			else
+				dac33->nsample = period_size;
+		} else {
+			/* nSample time shall not be shorter than i2c latency */
+			dac33->nsample_min = dac33->alarm_threshold;
+			/*
+			 * nSample should not be bigger than alsa buffer minus
+			 * size of one period to avoid overruns
+			 */
+			dac33->nsample_max = substream->runtime->buffer_size -
+						period_size;
+			nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
+					dac33->alarm_threshold;
+			if (dac33->nsample_max > nsample_limit)
+				dac33->nsample_max = nsample_limit;
+
+			/* Correct the nSample if it is outside of the ranges */
+			if (dac33->nsample < dac33->nsample_min)
+				dac33->nsample = dac33->nsample_min;
+			if (dac33->nsample > dac33->nsample_max)
+				dac33->nsample = dac33->nsample_max;
+		}
+
 		dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate,
 						      dac33->nsample);
 		dac33->t_stamp1 = 0;
 		dac33->t_stamp2 = 0;
 		break;
 	case DAC33_FIFO_MODE7:
+		if (dac33->auto_fifo_config) {
+			dac33->uthr = UTHR_FROM_PERIOD_SIZE(
+					period_size,
+					rate,
+					dac33->burst_rate) + 9;
+			if (dac33->uthr > MODE7_UTHR)
+				dac33->uthr = MODE7_UTHR;
+			if (dac33->uthr < (MODE7_LTHR + 10))
+				dac33->uthr = (MODE7_LTHR + 10);
+		}
 		dac33->mode7_us_to_lthr =
-					SAMPLES_TO_US(substream->runtime->rate,
-						MODE7_UTHR - MODE7_LTHR + 1);
+				SAMPLES_TO_US(substream->runtime->rate,
+					dac33->uthr - MODE7_LTHR + 1);
 		dac33->t_stamp1 = 0;
 		break;
 	default:
@@ -1104,7 +1167,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
 	struct snd_soc_codec *codec = socdev->card->codec;
 	struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
 	unsigned long long t0, t1, t_now;
-	unsigned int time_delta;
+	unsigned int time_delta, uthr;
 	int samples_out, samples_in, samples;
 	snd_pcm_sframes_t delay = 0;
 
@@ -1182,6 +1245,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
 	case DAC33_FIFO_MODE7:
 		spin_lock(&dac33->lock);
 		t0 = dac33->t_stamp1;
+		uthr = dac33->uthr;
 		spin_unlock(&dac33->lock);
 		t_now = ktime_to_us(ktime_get());
 
@@ -1194,7 +1258,7 @@ static snd_pcm_sframes_t dac33_dai_delay(
 			 * Either the timestamps are messed or equal. Report
 			 * maximum delay
 			 */
-			delay = MODE7_UTHR;
+			delay = uthr;
 			goto out;
 		}
 
@@ -1208,8 +1272,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
 					substream->runtime->rate,
 					time_delta);
 
-			if (likely(MODE7_UTHR > samples_out))
-				delay = MODE7_UTHR - samples_out;
+			if (likely(uthr > samples_out))
+				delay = uthr - samples_out;
 			else
 				delay = 0;
 		} else {
@@ -1227,8 +1291,8 @@ static snd_pcm_sframes_t dac33_dai_delay(
 					time_delta);
 			delay = MODE7_LTHR + samples_in - samples_out;
 
-			if (unlikely(delay > MODE7_UTHR))
-				delay = MODE7_UTHR;
+			if (unlikely(delay > uthr))
+				delay = uthr;
 		}
 		break;
 	default:
@@ -1347,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev)
 
 	snd_soc_add_controls(codec, dac33_snd_controls,
 			     ARRAY_SIZE(dac33_snd_controls));
-	/* Only add the nSample controls, if we have valid IRQ number */
-	if (dac33->irq >= 0)
-		snd_soc_add_controls(codec, dac33_nsample_snd_controls,
-				     ARRAY_SIZE(dac33_nsample_snd_controls));
+	/* Only add the FIFO controls, if we have valid IRQ number */
+	if (dac33->irq >= 0) {
+		snd_soc_add_controls(codec, dac33_mode_snd_controls,
+				     ARRAY_SIZE(dac33_mode_snd_controls));
+		/* FIFO usage controls only, if autoio config is not selected */
+		if (!dac33->auto_fifo_config)
+			snd_soc_add_controls(codec, dac33_fifo_snd_controls,
+					ARRAY_SIZE(dac33_fifo_snd_controls));
+	}
 
 	dac33_add_widgets(codec);
 
@@ -1481,9 +1550,14 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client,
 	/* Pre calculate the burst rate */
 	dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32;
 	dac33->keep_bclk = pdata->keep_bclk;
+	dac33->auto_fifo_config = pdata->auto_fifo_config;
+	dac33->mode1_latency = pdata->mode1_latency;
+	if (!dac33->mode1_latency)
+		dac33->mode1_latency = 10000; /* 10ms */
 	dac33->irq = client->irq;
 	dac33->nsample = NSAMPLE_MAX;
 	dac33->nsample_max = NSAMPLE_MAX;
+	dac33->uthr = MODE7_UTHR;
 	/* Disable FIFO use by default */
 	dac33->fifo_mode = DAC33_FIFO_BYPASS;
 
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index b4fcdb01fc4..7b618bbff88 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -43,37 +43,37 @@
  */
 static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
 	0x00, /* this register not used		*/
-	0x91, /* REG_CODEC_MODE		(0x1)	*/
-	0xc3, /* REG_OPTION		(0x2)	*/
+	0x00, /* REG_CODEC_MODE		(0x1)	*/
+	0x00, /* REG_OPTION		(0x2)	*/
 	0x00, /* REG_UNKNOWN		(0x3)	*/
 	0x00, /* REG_MICBIAS_CTL	(0x4)	*/
-	0x20, /* REG_ANAMICL		(0x5)	*/
+	0x00, /* REG_ANAMICL		(0x5)	*/
 	0x00, /* REG_ANAMICR		(0x6)	*/
 	0x00, /* REG_AVADC_CTL		(0x7)	*/
 	0x00, /* REG_ADCMICSEL		(0x8)	*/
 	0x00, /* REG_DIGMIXING		(0x9)	*/
-	0x0c, /* REG_ATXL1PGA		(0xA)	*/
-	0x0c, /* REG_ATXR1PGA		(0xB)	*/
-	0x00, /* REG_AVTXL2PGA		(0xC)	*/
-	0x00, /* REG_AVTXR2PGA		(0xD)	*/
+	0x0f, /* REG_ATXL1PGA		(0xA)	*/
+	0x0f, /* REG_ATXR1PGA		(0xB)	*/
+	0x0f, /* REG_AVTXL2PGA		(0xC)	*/
+	0x0f, /* REG_AVTXR2PGA		(0xD)	*/
 	0x00, /* REG_AUDIO_IF		(0xE)	*/
 	0x00, /* REG_VOICE_IF		(0xF)	*/
-	0x00, /* REG_ARXR1PGA		(0x10)	*/
-	0x00, /* REG_ARXL1PGA		(0x11)	*/
-	0x6c, /* REG_ARXR2PGA		(0x12)	*/
-	0x6c, /* REG_ARXL2PGA		(0x13)	*/
-	0x00, /* REG_VRXPGA		(0x14)	*/
+	0x3f, /* REG_ARXR1PGA		(0x10)	*/
+	0x3f, /* REG_ARXL1PGA		(0x11)	*/
+	0x3f, /* REG_ARXR2PGA		(0x12)	*/
+	0x3f, /* REG_ARXL2PGA		(0x13)	*/
+	0x25, /* REG_VRXPGA		(0x14)	*/
 	0x00, /* REG_VSTPGA		(0x15)	*/
 	0x00, /* REG_VRX2ARXPGA		(0x16)	*/
 	0x00, /* REG_AVDAC_CTL		(0x17)	*/
 	0x00, /* REG_ARX2VTXPGA		(0x18)	*/
-	0x00, /* REG_ARXL1_APGA_CTL	(0x19)	*/
-	0x00, /* REG_ARXR1_APGA_CTL	(0x1A)	*/
-	0x4a, /* REG_ARXL2_APGA_CTL	(0x1B)	*/
-	0x4a, /* REG_ARXR2_APGA_CTL	(0x1C)	*/
+	0x32, /* REG_ARXL1_APGA_CTL	(0x19)	*/
+	0x32, /* REG_ARXR1_APGA_CTL	(0x1A)	*/
+	0x32, /* REG_ARXL2_APGA_CTL	(0x1B)	*/
+	0x32, /* REG_ARXR2_APGA_CTL	(0x1C)	*/
 	0x00, /* REG_ATX2ARXPGA		(0x1D)	*/
 	0x00, /* REG_BT_IF		(0x1E)	*/
-	0x00, /* REG_BTPGA		(0x1F)	*/
+	0x55, /* REG_BTPGA		(0x1F)	*/
 	0x00, /* REG_BTSTPGA		(0x20)	*/
 	0x00, /* REG_EAR_CTL		(0x21)	*/
 	0x00, /* REG_HS_SEL		(0x22)	*/
@@ -85,32 +85,32 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
 	0x00, /* REG_PRECKR_CTL		(0x28)	*/
 	0x00, /* REG_HFL_CTL		(0x29)	*/
 	0x00, /* REG_HFR_CTL		(0x2A)	*/
-	0x00, /* REG_ALC_CTL		(0x2B)	*/
+	0x05, /* REG_ALC_CTL		(0x2B)	*/
 	0x00, /* REG_ALC_SET1		(0x2C)	*/
 	0x00, /* REG_ALC_SET2		(0x2D)	*/
 	0x00, /* REG_BOOST_CTL		(0x2E)	*/
 	0x00, /* REG_SOFTVOL_CTL	(0x2F)	*/
-	0x00, /* REG_DTMF_FREQSEL	(0x30)	*/
+	0x13, /* REG_DTMF_FREQSEL	(0x30)	*/
 	0x00, /* REG_DTMF_TONEXT1H	(0x31)	*/
 	0x00, /* REG_DTMF_TONEXT1L	(0x32)	*/
 	0x00, /* REG_DTMF_TONEXT2H	(0x33)	*/
 	0x00, /* REG_DTMF_TONEXT2L	(0x34)	*/
-	0x00, /* REG_DTMF_TONOFF	(0x35)	*/
-	0x00, /* REG_DTMF_WANONOFF	(0x36)	*/
+	0x79, /* REG_DTMF_TONOFF	(0x35)	*/
+	0x11, /* REG_DTMF_WANONOFF	(0x36)	*/
 	0x00, /* REG_I2S_RX_SCRAMBLE_H	(0x37)	*/
 	0x00, /* REG_I2S_RX_SCRAMBLE_M	(0x38)	*/
 	0x00, /* REG_I2S_RX_SCRAMBLE_L	(0x39)	*/
 	0x06, /* REG_APLL_CTL		(0x3A)	*/
 	0x00, /* REG_DTMF_CTL		(0x3B)	*/
-	0x00, /* REG_DTMF_PGA_CTL2	(0x3C)	*/
-	0x00, /* REG_DTMF_PGA_CTL1	(0x3D)	*/
+	0x44, /* REG_DTMF_PGA_CTL2	(0x3C)	*/
+	0x69, /* REG_DTMF_PGA_CTL1	(0x3D)	*/
 	0x00, /* REG_MISC_SET_1		(0x3E)	*/
 	0x00, /* REG_PCMBTMUX		(0x3F)	*/
 	0x00, /* not used		(0x40)	*/
 	0x00, /* not used		(0x41)	*/
 	0x00, /* not used		(0x42)	*/
 	0x00, /* REG_RX_PATH_SEL	(0x43)	*/
-	0x00, /* REG_VDL_APGA_CTL	(0x44)	*/
+	0x32, /* REG_VDL_APGA_CTL	(0x44)	*/
 	0x00, /* REG_VIBRA_CTL		(0x45)	*/
 	0x00, /* REG_VIBRA_SET		(0x46)	*/
 	0x00, /* REG_VIBRA_PWM_SET	(0x47)	*/
@@ -143,6 +143,9 @@ struct twl4030_priv {
 	u8 earpiece_enabled;
 	u8 predrivel_enabled, predriver_enabled;
 	u8 carkitl_enabled, carkitr_enabled;
+
+	/* Delay needed after enabling the digimic interface */
+	unsigned int digimic_delay;
 };
 
 /*
@@ -244,58 +247,95 @@ static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
 	udelay(10);
 }
 
-static void twl4030_init_chip(struct snd_soc_codec *codec)
+static inline void twl4030_check_defaults(struct snd_soc_codec *codec)
 {
-	u8 *cache = codec->reg_cache;
-	int i;
+	int i, difference = 0;
+	u8 val;
+
+	dev_dbg(codec->dev, "Checking TWL audio default configuration\n");
+	for (i = 1; i <= TWL4030_REG_MISC_SET_2; i++) {
+		twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val, i);
+		if (val != twl4030_reg[i]) {
+			difference++;
+			dev_dbg(codec->dev,
+				 "Reg 0x%02x: chip: 0x%02x driver: 0x%02x\n",
+				 i, val, twl4030_reg[i]);
+		}
+	}
+	dev_dbg(codec->dev, "Found %d non maching registers. %s\n",
+		 difference, difference ? "Not OK" : "OK");
+}
 
-	/* clear CODECPDZ prior to setting register defaults */
-	twl4030_codec_enable(codec, 0);
+static inline void twl4030_reset_registers(struct snd_soc_codec *codec)
+{
+	int i;
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
 		if (i != TWL4030_REG_APLL_CTL)
-			twl4030_write(codec, i,	cache[i]);
+			twl4030_write(codec, i, twl4030_reg[i]);
 
 }
 
-static void twl4030_apll_enable(struct snd_soc_codec *codec, int enable)
+static void twl4030_init_chip(struct platform_device *pdev)
 {
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct twl4030_setup_data *setup = socdev->codec_data;
+	struct snd_soc_codec *codec = socdev->card->codec;
 	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
-	int status = -1;
+	u8 reg, byte;
+	int i = 0;
 
-	if (enable) {
-		twl4030->apll_enabled++;
-		if (twl4030->apll_enabled == 1)
-			status = twl4030_codec_enable_resource(
-							TWL4030_CODEC_RES_APLL);
-	} else {
-		twl4030->apll_enabled--;
-		if (!twl4030->apll_enabled)
-			status = twl4030_codec_disable_resource(
-							TWL4030_CODEC_RES_APLL);
-	}
+	/* Check defaults, if instructed before anything else */
+	if (setup && setup->check_defaults)
+		twl4030_check_defaults(codec);
 
-	if (status >= 0)
-		twl4030_write_reg_cache(codec, TWL4030_REG_APLL_CTL, status);
-}
+	/* Reset registers, if no setup data or if instructed to do so */
+	if (!setup || (setup && setup->reset_registers))
+		twl4030_reset_registers(codec);
 
-static void twl4030_power_up(struct snd_soc_codec *codec)
-{
-	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
-	u8 anamicl, regmisc1, byte;
-	int i = 0;
+	/* Refresh APLL_CTL register from HW */
+	twl_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte,
+			    TWL4030_REG_APLL_CTL);
+	twl4030_write_reg_cache(codec, TWL4030_REG_APLL_CTL, byte);
+
+	/* anti-pop when changing analog gain */
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1);
+	twl4030_write(codec, TWL4030_REG_MISC_SET_1,
+		reg | TWL4030_SMOOTH_ANAVOL_EN);
 
-	if (twl4030->codec_powered)
+	twl4030_write(codec, TWL4030_REG_OPTION,
+		TWL4030_ATXL1_EN | TWL4030_ATXR1_EN |
+		TWL4030_ARXL2_EN | TWL4030_ARXR2_EN);
+
+	/* REG_ARXR2_APGA_CTL reset according to the TRM: 0dB, DA_EN */
+	twl4030_write(codec, TWL4030_REG_ARXR2_APGA_CTL, 0x32);
+
+	/* Machine dependent setup */
+	if (!setup)
 		return;
 
-	/* set CODECPDZ to turn on codec */
-	twl4030_codec_enable(codec, 1);
+	twl4030->digimic_delay = setup->digimic_delay;
+
+	/* Configuration for headset ramp delay from setup data */
+	if (setup->sysclk != twl4030->sysclk)
+		dev_warn(codec->dev,
+				"Mismatch in APLL mclk: %u (configured: %u)\n",
+				setup->sysclk, twl4030->sysclk);
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+	reg &= ~TWL4030_RAMP_DELAY;
+	reg |= (setup->ramp_delay_value << 2);
+	twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, reg);
 
 	/* initiate offset cancellation */
-	anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
+	twl4030_codec_enable(codec, 1);
+
+	reg = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
+	reg &= ~TWL4030_OFFSET_CNCL_SEL;
+	reg |= setup->offset_cncl_path;
 	twl4030_write(codec, TWL4030_REG_ANAMICL,
-		anamicl | TWL4030_CNCL_OFFSET_START);
+		reg | TWL4030_CNCL_OFFSET_START);
 
 	/* wait for offset cancellation to complete */
 	do {
@@ -310,23 +350,28 @@ static void twl4030_power_up(struct snd_soc_codec *codec)
 	/* Make sure that the reg_cache has the same value as the HW */
 	twl4030_write_reg_cache(codec, TWL4030_REG_ANAMICL, byte);
 
-	/* anti-pop when changing analog gain */
-	regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1);
-	twl4030_write(codec, TWL4030_REG_MISC_SET_1,
-		regmisc1 | TWL4030_SMOOTH_ANAVOL_EN);
-
-	/* toggle CODECPDZ as per TRM */
 	twl4030_codec_enable(codec, 0);
-	twl4030_codec_enable(codec, 1);
 }
 
-/*
- * Unconditional power down
- */
-static void twl4030_power_down(struct snd_soc_codec *codec)
+static void twl4030_apll_enable(struct snd_soc_codec *codec, int enable)
 {
-	/* power down */
-	twl4030_codec_enable(codec, 0);
+	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
+	int status = -1;
+
+	if (enable) {
+		twl4030->apll_enabled++;
+		if (twl4030->apll_enabled == 1)
+			status = twl4030_codec_enable_resource(
+							TWL4030_CODEC_RES_APLL);
+	} else {
+		twl4030->apll_enabled--;
+		if (!twl4030->apll_enabled)
+			status = twl4030_codec_disable_resource(
+							TWL4030_CODEC_RES_APLL);
+	}
+
+	if (status >= 0)
+		twl4030_write_reg_cache(codec, TWL4030_REG_APLL_CTL, status);
 }
 
 /* Earpiece */
@@ -500,10 +545,11 @@ static const struct snd_kcontrol_new twl4030_dapm_abypassl2_control =
 static const struct snd_kcontrol_new twl4030_dapm_abypassv_control =
 	SOC_DAPM_SINGLE("Switch", TWL4030_REG_VDL_APGA_CTL, 2, 1, 0);
 
-/* Digital bypass gain, 0 mutes the bypass */
+/* Digital bypass gain, mute instead of -30dB */
 static const unsigned int twl4030_dapm_dbypass_tlv[] = {
-	TLV_DB_RANGE_HEAD(2),
-	0, 3, TLV_DB_SCALE_ITEM(-2400, 0, 1),
+	TLV_DB_RANGE_HEAD(3),
+	0, 1, TLV_DB_SCALE_ITEM(-3000, 600, 1),
+	2, 3, TLV_DB_SCALE_ITEM(-2400, 0, 0),
 	4, 7, TLV_DB_SCALE_ITEM(-1800, 600, 0),
 };
 
@@ -531,36 +577,6 @@ static const struct snd_kcontrol_new twl4030_dapm_dbypassv_control =
 			TWL4030_REG_VSTPGA, 0, 0x29, 0,
 			twl4030_dapm_dbypassv_tlv);
 
-static int micpath_event(struct snd_soc_dapm_widget *w,
-	struct snd_kcontrol *kcontrol, int event)
-{
-	struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
-	unsigned char adcmicsel, micbias_ctl;
-
-	adcmicsel = twl4030_read_reg_cache(w->codec, TWL4030_REG_ADCMICSEL);
-	micbias_ctl = twl4030_read_reg_cache(w->codec, TWL4030_REG_MICBIAS_CTL);
-	/* Prepare the bits for the given TX path:
-	 * shift_l == 0: TX1 microphone path
-	 * shift_l == 2: TX2 microphone path */
-	if (e->shift_l) {
-		/* TX2 microphone path */
-		if (adcmicsel & TWL4030_TX2IN_SEL)
-			micbias_ctl |= TWL4030_MICBIAS2_CTL; /* digimic */
-		else
-			micbias_ctl &= ~TWL4030_MICBIAS2_CTL;
-	} else {
-		/* TX1 microphone path */
-		if (adcmicsel & TWL4030_TX1IN_SEL)
-			micbias_ctl |= TWL4030_MICBIAS1_CTL; /* digimic */
-		else
-			micbias_ctl &= ~TWL4030_MICBIAS1_CTL;
-	}
-
-	twl4030_write(w->codec, TWL4030_REG_MICBIAS_CTL, micbias_ctl);
-
-	return 0;
-}
-
 /*
  * Output PGA builder:
  * Handle the muting and unmuting of the given output (turning off the
@@ -814,6 +830,16 @@ static int headsetrpga_event(struct snd_soc_dapm_widget *w,
 	return 0;
 }
 
+static int digimic_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(w->codec);
+
+	if (twl4030->digimic_delay)
+		mdelay(twl4030->digimic_delay);
+	return 0;
+}
+
 /*
  * Some of the gain controls in TWL (mostly those which are associated with
  * the outputs) are implemented in an interesting way:
@@ -1374,14 +1400,10 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	/* Analog/Digital mic path selection.
 	   TX1 Left/Right: either analog Left/Right or Digimic0
 	   TX2 Left/Right: either analog Left/Right or Digimic1 */
-	SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_micpathtx1_control, micpath_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
-		SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
-		&twl4030_dapm_micpathtx2_control, micpath_event,
-		SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
-		SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_MUX("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_micpathtx1_control),
+	SND_SOC_DAPM_MUX("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
+		&twl4030_dapm_micpathtx2_control),
 
 	/* Analog input mixers for the capture amplifiers */
 	SND_SOC_DAPM_MIXER("Analog Left",
@@ -1398,10 +1420,17 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
 	SND_SOC_DAPM_PGA("ADC Physical Right",
 		TWL4030_REG_AVADC_CTL, 1, 0, NULL, 0),
 
-	SND_SOC_DAPM_PGA("Digimic0 Enable",
-		TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0),
-	SND_SOC_DAPM_PGA("Digimic1 Enable",
-		TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA_E("Digimic0 Enable",
+		TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0,
+		digimic_event, SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_PGA_E("Digimic1 Enable",
+		TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0,
+		digimic_event, SND_SOC_DAPM_POST_PMU),
+
+	SND_SOC_DAPM_SUPPLY("micbias1 select", TWL4030_REG_MICBIAS_CTL, 5, 0,
+			    NULL, 0),
+	SND_SOC_DAPM_SUPPLY("micbias2 select", TWL4030_REG_MICBIAS_CTL, 6, 0,
+			    NULL, 0),
 
 	SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0),
 	SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0),
@@ -1419,8 +1448,11 @@ static const struct snd_soc_dapm_route intercon[] = {
 	/* Supply for the digital part (APLL) */
 	{"Digital Voice Playback Mixer", NULL, "APLL Enable"},
 
-	{"Digital R1 Playback Mixer", NULL, "AIF Enable"},
-	{"Digital L1 Playback Mixer", NULL, "AIF Enable"},
+	{"DAC Left1", NULL, "AIF Enable"},
+	{"DAC Right1", NULL, "AIF Enable"},
+	{"DAC Left2", NULL, "AIF Enable"},
+	{"DAC Right1", NULL, "AIF Enable"},
+
 	{"Digital R2 Playback Mixer", NULL, "AIF Enable"},
 	{"Digital L2 Playback Mixer", NULL, "AIF Enable"},
 
@@ -1491,10 +1523,10 @@ static const struct snd_soc_dapm_route intercon[] = {
 
 	/* outputs */
 	/* Must be always connected (for AIF and APLL) */
-	{"Virtual HiFi OUT", NULL, "Digital L1 Playback Mixer"},
-	{"Virtual HiFi OUT", NULL, "Digital R1 Playback Mixer"},
-	{"Virtual HiFi OUT", NULL, "Digital L2 Playback Mixer"},
-	{"Virtual HiFi OUT", NULL, "Digital R2 Playback Mixer"},
+	{"Virtual HiFi OUT", NULL, "DAC Left1"},
+	{"Virtual HiFi OUT", NULL, "DAC Right1"},
+	{"Virtual HiFi OUT", NULL, "DAC Left2"},
+	{"Virtual HiFi OUT", NULL, "DAC Right2"},
 	/* Must be always connected (for APLL) */
 	{"Virtual Voice OUT", NULL, "Digital Voice Playback Mixer"},
 	/* Physical outputs */
@@ -1531,6 +1563,9 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"Digimic0 Enable", NULL, "DIGIMIC0"},
 	{"Digimic1 Enable", NULL, "DIGIMIC1"},
 
+	{"DIGIMIC0", NULL, "micbias1 select"},
+	{"DIGIMIC1", NULL, "micbias2 select"},
+
 	/* TX1 Left capture path */
 	{"TX1 Capture Route", "Analog", "ADC Physical Left"},
 	{"TX1 Capture Route", "Digimic0", "Digimic0 Enable"},
@@ -1605,10 +1640,10 @@ static int twl4030_set_bias_level(struct snd_soc_codec *codec,
 		break;
 	case SND_SOC_BIAS_STANDBY:
 		if (codec->bias_level == SND_SOC_BIAS_OFF)
-			twl4030_power_up(codec);
+			twl4030_codec_enable(codec, 1);
 		break;
 	case SND_SOC_BIAS_OFF:
-		twl4030_power_down(codec);
+		twl4030_codec_enable(codec, 0);
 		break;
 	}
 	codec->bias_level = level;
@@ -1794,13 +1829,6 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	if (mode != old_mode) {
-		/* change rate and set CODECPDZ */
-		twl4030_codec_enable(codec, 0);
-		twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
-		twl4030_codec_enable(codec, 1);
-	}
-
 	/* sample size */
 	old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
 	format = old_format;
@@ -1818,16 +1846,20 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	if (format != old_format) {
-
-		/* clear CODECPDZ before changing format (codec requirement) */
-		twl4030_codec_enable(codec, 0);
-
-		/* change format */
-		twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
-
-		/* set CODECPDZ afterwards */
-		twl4030_codec_enable(codec, 1);
+	if (format != old_format || mode != old_mode) {
+		if (twl4030->codec_powered) {
+			/*
+			 * If the codec is powered, than we need to toggle the
+			 * codec power.
+			 */
+			twl4030_codec_enable(codec, 0);
+			twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+			twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+			twl4030_codec_enable(codec, 1);
+		} else {
+			twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+			twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+		}
 	}
 
 	/* Store the important parameters for the DAI configuration and set
@@ -1877,6 +1909,7 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 			     unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
 	u8 old_format, format;
 
 	/* get format */
@@ -1911,15 +1944,17 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	}
 
 	if (format != old_format) {
-
-		/* clear CODECPDZ before changing format (codec requirement) */
-		twl4030_codec_enable(codec, 0);
-
-		/* change format */
-		twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
-
-		/* set CODECPDZ afterwards */
-		twl4030_codec_enable(codec, 1);
+		if (twl4030->codec_powered) {
+			/*
+			 * If the codec is powered, than we need to toggle the
+			 * codec power.
+			 */
+			twl4030_codec_enable(codec, 0);
+			twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+			twl4030_codec_enable(codec, 1);
+		} else {
+			twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+		}
 	}
 
 	return 0;
@@ -2011,6 +2046,7 @@ static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
 	u8 old_mode, mode;
 
 	/* Enable voice digital filters */
@@ -2035,10 +2071,17 @@ static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	if (mode != old_mode) {
-		/* change rate and set CODECPDZ */
-		twl4030_codec_enable(codec, 0);
-		twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
-		twl4030_codec_enable(codec, 1);
+		if (twl4030->codec_powered) {
+			/*
+			 * If the codec is powered, than we need to toggle the
+			 * codec power.
+			 */
+			twl4030_codec_enable(codec, 0);
+			twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+			twl4030_codec_enable(codec, 1);
+		} else {
+			twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+		}
 	}
 
 	return 0;
@@ -2068,6 +2111,7 @@ static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
 	u8 old_format, format;
 
 	/* get format */
@@ -2099,10 +2143,17 @@ static int twl4030_voice_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	}
 
 	if (format != old_format) {
-		/* change format and set CODECPDZ */
-		twl4030_codec_enable(codec, 0);
-		twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
-		twl4030_codec_enable(codec, 1);
+		if (twl4030->codec_powered) {
+			/*
+			 * If the codec is powered, than we need to toggle the
+			 * codec power.
+			 */
+			twl4030_codec_enable(codec, 0);
+			twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
+			twl4030_codec_enable(codec, 1);
+		} else {
+			twl4030_write(codec, TWL4030_REG_VOICE_IF, format);
+		}
 	}
 
 	return 0;
@@ -2202,31 +2253,15 @@ static struct snd_soc_codec *twl4030_codec;
 static int twl4030_soc_probe(struct platform_device *pdev)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct twl4030_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec;
-	struct twl4030_priv *twl4030;
 	int ret;
 
 	BUG_ON(!twl4030_codec);
 
 	codec = twl4030_codec;
-	twl4030 = snd_soc_codec_get_drvdata(codec);
 	socdev->card->codec = codec;
 
-	/* Configuration for headset ramp delay from setup data */
-	if (setup) {
-		unsigned char hs_pop;
-
-		if (setup->sysclk != twl4030->sysclk)
-			dev_warn(&pdev->dev,
-				 "Mismatch in APLL mclk: %u (configured: %u)\n",
-				 setup->sysclk, twl4030->sysclk);
-
-		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
-		hs_pop &= ~TWL4030_RAMP_DELAY;
-		hs_pop |= (setup->ramp_delay_value << 2);
-		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-	}
+	twl4030_init_chip(pdev);
 
 	/* register pcms */
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
@@ -2247,6 +2282,8 @@ static int twl4030_soc_remove(struct platform_device *pdev)
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
 
+	/* Reset registers to their chip default before leaving */
+	twl4030_reset_registers(codec);
 	twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
@@ -2287,6 +2324,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev)
 	codec->read = twl4030_read_reg_cache;
 	codec->write = twl4030_write;
 	codec->set_bias_level = twl4030_set_bias_level;
+	codec->idle_bias_off = 1;
 	codec->dai = twl4030_dai;
 	codec->num_dai = ARRAY_SIZE(twl4030_dai);
 	codec->reg_cache_size = sizeof(twl4030_reg);
@@ -2302,9 +2340,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev)
 
 	/* Set the defaults, and power up the codec */
 	twl4030->sysclk = twl4030_codec_get_mclk() / 1000;
-	twl4030_init_chip(codec);
 	codec->bias_level = SND_SOC_BIAS_OFF;
-	twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
@@ -2322,7 +2358,7 @@ static int __devinit twl4030_codec_probe(struct platform_device *pdev)
 	return 0;
 
 error_codec:
-	twl4030_power_down(codec);
+	twl4030_codec_enable(codec, 0);
 	kfree(codec->reg_cache);
 error_cache:
 	kfree(twl4030);
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index f206d242ca3..6c57430f6e2 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -41,7 +41,11 @@ extern struct snd_soc_codec_device soc_codec_dev_twl4030;
 
 struct twl4030_setup_data {
 	unsigned int ramp_delay_value;
+	unsigned int digimic_delay; /* in ms */
 	unsigned int sysclk;
+	unsigned int offset_cncl_path;
+	unsigned int check_defaults:1;
+	unsigned int reset_registers:1;
 	unsigned int hs_extmute:1;
 	void (*set_hs_extmute)(int mute);
 };
diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c
index af36346ff33..64a807f1a8a 100644
--- a/sound/soc/codecs/twl6040.c
+++ b/sound/soc/codecs/twl6040.c
@@ -360,6 +360,13 @@ static int headset_power_mode(struct snd_soc_codec *codec, int high_perf)
 	return 0;
 }
 
+static int twl6040_hs_dac_event(struct snd_soc_dapm_widget *w,
+			struct snd_kcontrol *kcontrol, int event)
+{
+	msleep(1);
+	return 0;
+}
+
 static int twl6040_power_mode_event(struct snd_soc_dapm_widget *w,
 			struct snd_kcontrol *kcontrol, int event)
 {
@@ -371,6 +378,8 @@ static int twl6040_power_mode_event(struct snd_soc_dapm_widget *w,
 	else
 		priv->non_lp--;
 
+	msleep(1);
+
 	return 0;
 }
 
@@ -471,20 +480,6 @@ static const struct snd_kcontrol_new hfdacl_switch_controls =
 static const struct snd_kcontrol_new hfdacr_switch_controls =
 	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFRCTL, 2, 1, 0);
 
-/* Headset driver switches */
-static const struct snd_kcontrol_new hsl_driver_switch_controls =
-	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HSLCTL, 2, 1, 0);
-
-static const struct snd_kcontrol_new hsr_driver_switch_controls =
-	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HSRCTL, 2, 1, 0);
-
-/* Handsfree driver switches */
-static const struct snd_kcontrol_new hfl_driver_switch_controls =
-	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFLCTL, 4, 1, 0);
-
-static const struct snd_kcontrol_new hfr_driver_switch_controls =
-	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFRCTL, 4, 1, 0);
-
 static const struct snd_kcontrol_new ep_driver_switch_controls =
 	SOC_DAPM_SINGLE("Switch", TWL6040_REG_EARCTL, 0, 1, 0);
 
@@ -548,10 +543,14 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			TWL6040_REG_DMICBCTL, 4, 0),
 
 	/* DACs */
-	SND_SOC_DAPM_DAC("HSDAC Left", "Headset Playback",
-			TWL6040_REG_HSLCTL, 0, 0),
-	SND_SOC_DAPM_DAC("HSDAC Right", "Headset Playback",
-			TWL6040_REG_HSRCTL, 0, 0),
+	SND_SOC_DAPM_DAC_E("HSDAC Left", "Headset Playback",
+			TWL6040_REG_HSLCTL, 0, 0,
+			twl6040_hs_dac_event,
+			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_DAC_E("HSDAC Right", "Headset Playback",
+			TWL6040_REG_HSRCTL, 0, 0,
+			twl6040_hs_dac_event,
+			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
 	SND_SOC_DAPM_DAC_E("HFDAC Left", "Handsfree Playback",
 			TWL6040_REG_HFLCTL, 0, 0,
 			twl6040_power_mode_event,
@@ -571,18 +570,19 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_SWITCH("HFDAC Right Playback",
 			SND_SOC_NOPM, 0, 0, &hfdacr_switch_controls),
 
-	SND_SOC_DAPM_SWITCH("Headset Left Driver",
-			SND_SOC_NOPM, 0, 0, &hsl_driver_switch_controls),
-	SND_SOC_DAPM_SWITCH("Headset Right Driver",
-			SND_SOC_NOPM, 0, 0, &hsr_driver_switch_controls),
-	SND_SOC_DAPM_SWITCH_E("Handsfree Left Driver",
-			SND_SOC_NOPM, 0, 0, &hfl_driver_switch_controls,
+	/* Analog playback drivers */
+	SND_SOC_DAPM_PGA_E("Handsfree Left Driver",
+			TWL6040_REG_HFLCTL, 4, 0, NULL, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
-	SND_SOC_DAPM_SWITCH_E("Handsfree Right Driver",
-			SND_SOC_NOPM, 0, 0, &hfr_driver_switch_controls,
+	SND_SOC_DAPM_PGA_E("Handsfree Right Driver",
+			TWL6040_REG_HFRCTL, 4, 0, NULL, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_PGA("Headset Left Driver",
+			TWL6040_REG_HSLCTL, 2, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Headset Right Driver",
+			TWL6040_REG_HSRCTL, 2, 0, NULL, 0),
 	SND_SOC_DAPM_SWITCH_E("Earphone Driver",
 			SND_SOC_NOPM, 0, 0, &ep_driver_switch_controls,
 			twl6040_power_mode_event,
@@ -616,8 +616,8 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{"HSDAC Left Playback", "Switch", "HSDAC Left"},
 	{"HSDAC Right Playback", "Switch", "HSDAC Right"},
 
-	{"Headset Left Driver", "Switch", "HSDAC Left Playback"},
-	{"Headset Right Driver", "Switch", "HSDAC Right Playback"},
+	{"Headset Left Driver", NULL, "HSDAC Left Playback"},
+	{"Headset Right Driver", NULL, "HSDAC Right Playback"},
 
 	{"HSOL", NULL, "Headset Left Driver"},
 	{"HSOR", NULL, "Headset Right Driver"},
@@ -928,7 +928,7 @@ static int twl6040_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		case 19200000:
 			/* mclk input, pll disabled */
 			hppllctl |= TWL6040_MCLK_19200KHZ |
-				    TWL6040_HPLLSQRBP |
+				    TWL6040_HPLLSQRENA |
 				    TWL6040_HPLLBP;
 			break;
 		case 26000000:
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 28aac53c97b..f3b4c1d6a82 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -28,19 +28,6 @@
 #include "uda134x.h"
 
 
-#define POWER_OFF_ON_STANDBY 1
-/*
-  ALSA SOC usually puts the device in standby mode when it's not used
-  for sometime. If you define POWER_OFF_ON_STANDBY the driver will
-  turn off the ADC/DAC when this callback is invoked and turn it back
-  on when needed. Unfortunately this will result in a very light bump
-  (it can be audible only with good earphones). If this bothers you
-  just comment this line, you will have slightly higher power
-  consumption . Please note that sending the L3 command for ADC is
-  enough to make the bump, so it doesn't make difference if you
-  completely take off power from the codec.
- */
-
 #define UDA134X_RATES SNDRV_PCM_RATE_8000_48000
 #define UDA134X_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
 		SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE)
@@ -58,7 +45,7 @@ static const char uda134x_reg[UDA134X_REGS_NUM] = {
 	/* Extended address registers */
 	0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
 	/* Status, data regs */
-	0x00, 0x83, 0x00, 0x40, 0x80, 0x00,
+	0x00, 0x83, 0x00, 0x40, 0x80, 0xC0, 0x00,
 };
 
 /*
@@ -117,6 +104,7 @@ static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg,
 	case UDA134X_DATA000:
 	case UDA134X_DATA001:
 	case UDA134X_DATA010:
+	case UDA134X_DATA011:
 		addr = UDA134X_DATA0_ADDR;
 		break;
 	case UDA134X_DATA1:
@@ -353,8 +341,22 @@ static int uda134x_set_bias_level(struct snd_soc_codec *codec,
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		/* ADC, DAC on */
-		reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
-		uda134x_write(codec, UDA134X_STATUS1, reg | 0x03);
+		switch (pd->model) {
+		case UDA134X_UDA1340:
+		case UDA134X_UDA1344:
+		case UDA134X_UDA1345:
+			reg = uda134x_read_reg_cache(codec, UDA134X_DATA011);
+			uda134x_write(codec, UDA134X_DATA011, reg | 0x03);
+			break;
+		case UDA134X_UDA1341:
+			reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
+			uda134x_write(codec, UDA134X_STATUS1, reg | 0x03);
+			break;
+		default:
+			printk(KERN_ERR "UDA134X SoC codec: "
+			       "unsupported model %d\n", pd->model);
+			return -EINVAL;
+		}
 		break;
 	case SND_SOC_BIAS_PREPARE:
 		/* power on */
@@ -367,8 +369,22 @@ static int uda134x_set_bias_level(struct snd_soc_codec *codec,
 		break;
 	case SND_SOC_BIAS_STANDBY:
 		/* ADC, DAC power off */
-		reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
-		uda134x_write(codec, UDA134X_STATUS1, reg & ~(0x03));
+		switch (pd->model) {
+		case UDA134X_UDA1340:
+		case UDA134X_UDA1344:
+		case UDA134X_UDA1345:
+			reg = uda134x_read_reg_cache(codec, UDA134X_DATA011);
+			uda134x_write(codec, UDA134X_DATA011, reg & ~(0x03));
+			break;
+		case UDA134X_UDA1341:
+			reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
+			uda134x_write(codec, UDA134X_STATUS1, reg & ~(0x03));
+			break;
+		default:
+			printk(KERN_ERR "UDA134X SoC codec: "
+			       "unsupported model %d\n", pd->model);
+			return -EINVAL;
+		}
 		break;
 	case SND_SOC_BIAS_OFF:
 		/* power off */
@@ -531,9 +547,7 @@ static int uda134x_soc_probe(struct platform_device *pdev)
 	codec->num_dai = 1;
 	codec->read = uda134x_read_reg_cache;
 	codec->write = uda134x_write;
-#ifdef POWER_OFF_ON_STANDBY
-	codec->set_bias_level = uda134x_set_bias_level;
-#endif
+
 	INIT_LIST_HEAD(&codec->dapm_widgets);
 	INIT_LIST_HEAD(&codec->dapm_paths);
 
@@ -544,6 +558,14 @@ static int uda134x_soc_probe(struct platform_device *pdev)
 
 	uda134x_reset(codec);
 
+	if (pd->is_powered_on_standby) {
+		codec->set_bias_level = NULL;
+		uda134x_set_bias_level(codec, SND_SOC_BIAS_ON);
+	} else {
+		codec->set_bias_level = uda134x_set_bias_level;
+		uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	}
+
 	/* register pcms */
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
diff --git a/sound/soc/codecs/uda134x.h b/sound/soc/codecs/uda134x.h
index 94f440490b3..205f03b3eaf 100644
--- a/sound/soc/codecs/uda134x.h
+++ b/sound/soc/codecs/uda134x.h
@@ -23,9 +23,10 @@
 #define UDA134X_DATA000 10
 #define UDA134X_DATA001 11
 #define UDA134X_DATA010 12
-#define UDA134X_DATA1	13
+#define UDA134X_DATA011 13
+#define UDA134X_DATA1   14
 
-#define UDA134X_REGS_NUM 14
+#define UDA134X_REGS_NUM 15
 
 #define STATUS0_DAIFMT_MASK (~(7<<1))
 #define STATUS0_SYSCLK_MASK (~(3<<4))
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index 002e289d125..4bcd168794e 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -795,6 +795,8 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
 
 	dev_set_drvdata(&i2c->dev, wm2000);
 	wm2000->anc_eng_ena = 1;
+	wm2000->anc_active = 1;
+	wm2000->spk_ena = 1;
 	wm2000->i2c = i2c;
 
 	wm2000_reset(wm2000);
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 37242a7d307..0ad039b4adf 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -482,7 +482,8 @@ static int wm8523_register(struct wm8523_priv *wm8523,
 
 	if (wm8523_codec) {
 		dev_err(codec->dev, "Another WM8523 is registered\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	mutex_init(&codec->mutex);
@@ -570,18 +571,19 @@ static int wm8523_register(struct wm8523_priv *wm8523,
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		return ret;
+		goto err_enable;
 	}
 
 	ret = snd_soc_register_dai(&wm8523_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
-		return ret;
+		goto err_codec;
 	}
 
 	return 0;
 
+err_codec:
+	snd_soc_unregister_codec(codec);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
 err_get:
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index effb14eee7d..e2dba07f026 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -439,7 +439,8 @@ static int wm8711_register(struct wm8711_priv *wm8711,
 
 	if (wm8711_codec) {
 		dev_err(codec->dev, "Another WM8711 is registered\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	mutex_init(&codec->mutex);
diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
new file mode 100644
index 00000000000..b9ea8904ad4
--- /dev/null
+++ b/sound/soc/codecs/wm8741.c
@@ -0,0 +1,579 @@
+/*
+ * wm8741.c  --  WM8741 ALSA SoC Audio driver
+ *
+ * Copyright 2010 Wolfson Microelectronics plc
+ *
+ * Author: Ian Lartey <ian@opensource.wolfsonmicro.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8741.h"
+
+static struct snd_soc_codec *wm8741_codec;
+struct snd_soc_codec_device soc_codec_dev_wm8741;
+
+#define WM8741_NUM_SUPPLIES 2
+static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = {
+	"AVDD",
+	"DVDD",
+};
+
+#define WM8741_NUM_RATES 4
+
+/* codec private data */
+struct wm8741_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM8741_REGISTER_COUNT];
+	struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
+	unsigned int sysclk;
+	unsigned int rate_constraint_list[WM8741_NUM_RATES];
+	struct snd_pcm_hw_constraint_list rate_constraint;
+};
+
+static const u16 wm8741_reg_defaults[WM8741_REGISTER_COUNT] = {
+	0x0000,     /* R0  - DACLLSB Attenuation */
+	0x0000,     /* R1  - DACLMSB Attenuation */
+	0x0000,     /* R2  - DACRLSB Attenuation */
+	0x0000,     /* R3  - DACRMSB Attenuation */
+	0x0000,     /* R4  - Volume Control */
+	0x000A,     /* R5  - Format Control */
+	0x0000,     /* R6  - Filter Control */
+	0x0000,     /* R7  - Mode Control 1 */
+	0x0002,     /* R8  - Mode Control 2 */
+	0x0000,	    /* R9  - Reset */
+	0x0002,     /* R32 - ADDITONAL_CONTROL_1 */
+};
+
+
+static int wm8741_reset(struct snd_soc_codec *codec)
+{
+	return snd_soc_write(codec, WM8741_RESET, 0);
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv_fine, -12700, 13, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 400, 0);
+
+static const struct snd_kcontrol_new wm8741_snd_controls[] = {
+SOC_DOUBLE_R_TLV("Fine Playback Volume", WM8741_DACLLSB_ATTENUATION,
+		 WM8741_DACRLSB_ATTENUATION, 1, 255, 1, dac_tlv_fine),
+SOC_DOUBLE_R_TLV("Playback Volume", WM8741_DACLMSB_ATTENUATION,
+		 WM8741_DACRMSB_ATTENUATION, 0, 511, 1, dac_tlv),
+};
+
+static const struct snd_soc_dapm_widget wm8741_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DACL", "Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_DAC("DACR", "Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_OUTPUT("VOUTLP"),
+SND_SOC_DAPM_OUTPUT("VOUTLN"),
+SND_SOC_DAPM_OUTPUT("VOUTRP"),
+SND_SOC_DAPM_OUTPUT("VOUTRN"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+	{ "VOUTLP", NULL, "DACL" },
+	{ "VOUTLN", NULL, "DACL" },
+	{ "VOUTRP", NULL, "DACR" },
+	{ "VOUTRN", NULL, "DACR" },
+};
+
+static int wm8741_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8741_dapm_widgets,
+				  ARRAY_SIZE(wm8741_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+	return 0;
+}
+
+static struct {
+	int value;
+	int ratio;
+} lrclk_ratios[WM8741_NUM_RATES] = {
+	{ 1, 256 },
+	{ 2, 384 },
+	{ 3, 512 },
+	{ 4, 768 },
+};
+
+
+static int wm8741_startup(struct snd_pcm_substream *substream,
+			  struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+
+	/* The set of sample rates that can be supported depends on the
+	 * MCLK supplied to the CODEC - enforce this.
+	 */
+	if (!wm8741->sysclk) {
+		dev_err(codec->dev,
+			"No MCLK configured, call set_sysclk() on init\n");
+		return -EINVAL;
+	}
+
+	snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_RATE,
+				   &wm8741->rate_constraint);
+
+	return 0;
+}
+
+static int wm8741_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+	u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1FC;
+	int i;
+
+	/* Find a supported LRCLK ratio */
+	for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+		if (wm8741->sysclk / params_rate(params) ==
+		    lrclk_ratios[i].ratio)
+			break;
+	}
+
+	/* Should never happen, should be handled by constraints */
+	if (i == ARRAY_SIZE(lrclk_ratios)) {
+		dev_err(codec->dev, "MCLK/fs ratio %d unsupported\n",
+			wm8741->sysclk / params_rate(params));
+		return -EINVAL;
+	}
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0001;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0002;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x0003;
+		break;
+	default:
+		dev_dbg(codec->dev, "wm8741_hw_params:    Unsupported bit size param = %d",
+			params_format(params));
+		return -EINVAL;
+	}
+
+	dev_dbg(codec->dev, "wm8741_hw_params:    bit size param = %d",
+		params_format(params));
+
+	snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface);
+	return 0;
+}
+
+static int wm8741_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+	unsigned int val;
+	int i;
+
+	dev_dbg(codec->dev, "wm8741_set_dai_sysclk info: freq=%dHz\n", freq);
+
+	wm8741->sysclk = freq;
+
+	wm8741->rate_constraint.count = 0;
+
+	for (i = 0; i < ARRAY_SIZE(lrclk_ratios); i++) {
+		dev_dbg(codec->dev, "index = %d, ratio = %d, freq = %d",
+				i, lrclk_ratios[i].ratio, freq);
+
+		val = freq / lrclk_ratios[i].ratio;
+		/* Check that it's a standard rate since core can't
+		 * cope with others and having the odd rates confuses
+		 * constraint matching.
+		 */
+		switch (val) {
+		case 32000:
+		case 44100:
+		case 48000:
+		case 64000:
+		case 88200:
+		case 96000:
+			dev_dbg(codec->dev, "Supported sample rate: %dHz\n",
+				val);
+			wm8741->rate_constraint_list[i] = val;
+			wm8741->rate_constraint.count++;
+			break;
+		default:
+			dev_dbg(codec->dev, "Skipping sample rate: %dHz\n",
+				val);
+		}
+	}
+
+	/* Need at least one supported rate... */
+	if (wm8741->rate_constraint.count == 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int wm8741_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = snd_soc_read(codec, WM8741_FORMAT_CONTROL) & 0x1C3;
+
+	/* check master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0008;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0004;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0010;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0020;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0030;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+
+	dev_dbg(codec->dev, "wm8741_set_dai_fmt:    Format=%x, Clock Inv=%x\n",
+				fmt & SND_SOC_DAIFMT_FORMAT_MASK,
+				((fmt & SND_SOC_DAIFMT_INV_MASK)));
+
+	snd_soc_write(codec, WM8741_FORMAT_CONTROL, iface);
+	return 0;
+}
+
+#define WM8741_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+			SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
+			SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \
+			SNDRV_PCM_RATE_192000)
+
+#define WM8741_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_ops wm8741_dai_ops = {
+	.startup	= wm8741_startup,
+	.hw_params	= wm8741_hw_params,
+	.set_sysclk	= wm8741_set_dai_sysclk,
+	.set_fmt	= wm8741_set_dai_fmt,
+};
+
+struct snd_soc_dai wm8741_dai = {
+	.name = "WM8741",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,  /* Mono modes not yet supported */
+		.channels_max = 2,
+		.rates = WM8741_RATES,
+		.formats = WM8741_FORMATS,
+	},
+	.ops = &wm8741_dai_ops,
+};
+EXPORT_SYMBOL_GPL(wm8741_dai);
+
+#ifdef CONFIG_PM
+static int wm8741_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	u16 *cache = codec->reg_cache;
+	int i;
+
+	/* RESTORE REG Cache */
+	for (i = 0; i < WM8741_REGISTER_COUNT; i++) {
+		if (cache[i] == wm8741_reg_defaults[i] || WM8741_RESET == i)
+			continue;
+		snd_soc_write(codec, i, cache[i]);
+	}
+	return 0;
+}
+#else
+#define wm8741_suspend NULL
+#define wm8741_resume NULL
+#endif
+
+static int wm8741_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8741_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8741_codec;
+	codec = wm8741_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8741_snd_controls,
+			     ARRAY_SIZE(wm8741_snd_controls));
+	wm8741_add_widgets(codec);
+
+	return ret;
+
+pcm_err:
+	return ret;
+}
+
+static int wm8741_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8741 = {
+	.probe =	wm8741_probe,
+	.remove =	wm8741_remove,
+	.resume =	wm8741_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8741);
+
+static int wm8741_register(struct wm8741_priv *wm8741,
+			   enum snd_soc_control_type control)
+{
+	int ret;
+	struct snd_soc_codec *codec = &wm8741->codec;
+	int i;
+
+	if (wm8741_codec) {
+		dev_err(codec->dev, "Another WM8741 is registered\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	snd_soc_codec_set_drvdata(codec, wm8741);
+	codec->name = "WM8741";
+	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = NULL;
+	codec->dai = &wm8741_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8741_REGISTER_COUNT;
+	codec->reg_cache = &wm8741->reg_cache;
+
+	wm8741->rate_constraint.list = &wm8741->rate_constraint_list[0];
+	wm8741->rate_constraint.count =
+		ARRAY_SIZE(wm8741->rate_constraint_list);
+
+	memcpy(codec->reg_cache, wm8741_reg_defaults,
+		sizeof(wm8741->reg_cache));
+
+	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		goto err;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wm8741->supplies); i++)
+		wm8741->supplies[i].supply = wm8741_supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8741->supplies),
+				 wm8741->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		goto err;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8741->supplies),
+				    wm8741->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		goto err_get;
+	}
+
+	ret = wm8741_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		goto err_enable;
+	}
+
+	wm8741_dai.dev = codec->dev;
+
+	/* Change some default settings - latch VU */
+	wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
+	wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
+	wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
+	wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
+
+	wm8741_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_register_dai(&wm8741_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		return ret;
+	}
+
+	dev_dbg(codec->dev, "Successful registration\n");
+	return 0;
+
+err_enable:
+	regulator_bulk_disable(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+
+err_get:
+	regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+
+err:
+	kfree(wm8741);
+	return ret;
+}
+
+static void wm8741_unregister(struct wm8741_priv *wm8741)
+{
+	regulator_bulk_free(ARRAY_SIZE(wm8741->supplies), wm8741->supplies);
+
+	snd_soc_unregister_dai(&wm8741_dai);
+	snd_soc_unregister_codec(&wm8741->codec);
+	kfree(wm8741);
+	wm8741_codec = NULL;
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8741_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8741_priv *wm8741;
+	struct snd_soc_codec *codec;
+
+	wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL);
+	if (wm8741 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8741->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8741);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8741_register(wm8741, SND_SOC_I2C);
+}
+
+static __devexit int wm8741_i2c_remove(struct i2c_client *client)
+{
+	struct wm8741_priv *wm8741 = i2c_get_clientdata(client);
+	wm8741_unregister(wm8741);
+	return 0;
+}
+
+static const struct i2c_device_id wm8741_i2c_id[] = {
+	{ "wm8741", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8741_i2c_id);
+
+
+static struct i2c_driver wm8741_i2c_driver = {
+	.driver = {
+		.name = "WM8741",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8741_i2c_probe,
+	.remove =   __devexit_p(wm8741_i2c_remove),
+	.id_table = wm8741_i2c_id,
+};
+#endif
+
+static int __init wm8741_modinit(void)
+{
+	int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8741_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8741 I2C driver: %d\n",
+		       ret);
+	}
+#endif
+	return 0;
+}
+module_init(wm8741_modinit);
+
+static void __exit wm8741_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8741_i2c_driver);
+#endif
+}
+module_exit(wm8741_exit);
+
+MODULE_DESCRIPTION("ASoC WM8741 driver");
+MODULE_AUTHOR("Ian Lartey <ian@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8741.h b/sound/soc/codecs/wm8741.h
new file mode 100644
index 00000000000..fdef6ecd1f6
--- /dev/null
+++ b/sound/soc/codecs/wm8741.h
@@ -0,0 +1,214 @@
+/*
+ * wm8741.h  --  WM8423 ASoC driver
+ *
+ * Copyright 2010 Wolfson Microelectronics, plc
+ *
+ * Author: Ian Lartey <ian@opensource.wolfsonmicro.com>
+ *
+ * Based on wm8753.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8741_H
+#define _WM8741_H
+
+/*
+ * Register values.
+ */
+#define WM8741_DACLLSB_ATTENUATION              0x00
+#define WM8741_DACLMSB_ATTENUATION              0x01
+#define WM8741_DACRLSB_ATTENUATION              0x02
+#define WM8741_DACRMSB_ATTENUATION              0x03
+#define WM8741_VOLUME_CONTROL                   0x04
+#define WM8741_FORMAT_CONTROL                   0x05
+#define WM8741_FILTER_CONTROL                   0x06
+#define WM8741_MODE_CONTROL_1                   0x07
+#define WM8741_MODE_CONTROL_2                   0x08
+#define WM8741_RESET                            0x09
+#define WM8741_ADDITIONAL_CONTROL_1             0x20
+
+#define WM8741_REGISTER_COUNT                   11
+#define WM8741_MAX_REGISTER                     0x20
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - DACLLSB_ATTENUATION
+ */
+#define WM8741_UPDATELL                         0x0020  /* UPDATELL */
+#define WM8741_UPDATELL_MASK                    0x0020  /* UPDATELL */
+#define WM8741_UPDATELL_SHIFT                        5  /* UPDATELL */
+#define WM8741_UPDATELL_WIDTH                        1  /* UPDATELL */
+#define WM8741_LAT_4_0_MASK                     0x001F  /* LAT[4:0] - [4:0] */
+#define WM8741_LAT_4_0_SHIFT                         0  /* LAT[4:0] - [4:0] */
+#define WM8741_LAT_4_0_WIDTH                         5  /* LAT[4:0] - [4:0] */
+
+/*
+ * R1 (0x01) - DACLMSB_ATTENUATION
+ */
+#define WM8741_UPDATELM                         0x0020  /* UPDATELM */
+#define WM8741_UPDATELM_MASK                    0x0020  /* UPDATELM */
+#define WM8741_UPDATELM_SHIFT                        5  /* UPDATELM */
+#define WM8741_UPDATELM_WIDTH                        1  /* UPDATELM */
+#define WM8741_LAT_9_5_0_MASK                   0x001F  /* LAT[9:5] - [4:0] */
+#define WM8741_LAT_9_5_0_SHIFT                       0  /* LAT[9:5] - [4:0] */
+#define WM8741_LAT_9_5_0_WIDTH                       5  /* LAT[9:5] - [4:0] */
+
+/*
+ * R2 (0x02) - DACRLSB_ATTENUATION
+ */
+#define WM8741_UPDATERL                         0x0020  /* UPDATERL */
+#define WM8741_UPDATERL_MASK                    0x0020  /* UPDATERL */
+#define WM8741_UPDATERL_SHIFT                        5  /* UPDATERL */
+#define WM8741_UPDATERL_WIDTH                        1  /* UPDATERL */
+#define WM8741_RAT_4_0_MASK                     0x001F  /* RAT[4:0] - [4:0] */
+#define WM8741_RAT_4_0_SHIFT                         0  /* RAT[4:0] - [4:0] */
+#define WM8741_RAT_4_0_WIDTH                         5  /* RAT[4:0] - [4:0] */
+
+/*
+ * R3 (0x03) - DACRMSB_ATTENUATION
+ */
+#define WM8741_UPDATERM                         0x0020  /* UPDATERM */
+#define WM8741_UPDATERM_MASK                    0x0020  /* UPDATERM */
+#define WM8741_UPDATERM_SHIFT                        5  /* UPDATERM */
+#define WM8741_UPDATERM_WIDTH                        1  /* UPDATERM */
+#define WM8741_RAT_9_5_0_MASK                   0x001F  /* RAT[9:5] - [4:0] */
+#define WM8741_RAT_9_5_0_SHIFT                       0  /* RAT[9:5] - [4:0] */
+#define WM8741_RAT_9_5_0_WIDTH                       5  /* RAT[9:5] - [4:0] */
+
+/*
+ * R4 (0x04) - VOLUME_CONTROL
+ */
+#define WM8741_AMUTE                            0x0080  /* AMUTE */
+#define WM8741_AMUTE_MASK                       0x0080  /* AMUTE */
+#define WM8741_AMUTE_SHIFT                           7  /* AMUTE */
+#define WM8741_AMUTE_WIDTH                           1  /* AMUTE */
+#define WM8741_ZFLAG_MASK                       0x0060  /* ZFLAG - [6:5] */
+#define WM8741_ZFLAG_SHIFT                           5  /* ZFLAG - [6:5] */
+#define WM8741_ZFLAG_WIDTH                           2  /* ZFLAG - [6:5] */
+#define WM8741_IZD                              0x0010  /* IZD */
+#define WM8741_IZD_MASK                         0x0010  /* IZD */
+#define WM8741_IZD_SHIFT                             4  /* IZD */
+#define WM8741_IZD_WIDTH                             1  /* IZD */
+#define WM8741_SOFT                             0x0008  /* SOFT MUTE */
+#define WM8741_SOFT_MASK                        0x0008  /* SOFT MUTE */
+#define WM8741_SOFT_SHIFT                            3  /* SOFT MUTE */
+#define WM8741_SOFT_WIDTH                            1  /* SOFT MUTE */
+#define WM8741_ATC                              0x0004  /* ATC */
+#define WM8741_ATC_MASK                         0x0004  /* ATC */
+#define WM8741_ATC_SHIFT                             2  /* ATC */
+#define WM8741_ATC_WIDTH                             1  /* ATC */
+#define WM8741_ATT2DB                           0x0002  /* ATT2DB */
+#define WM8741_ATT2DB_MASK                      0x0002  /* ATT2DB */
+#define WM8741_ATT2DB_SHIFT                          1  /* ATT2DB */
+#define WM8741_ATT2DB_WIDTH                          1  /* ATT2DB */
+#define WM8741_VOL_RAMP                         0x0001  /* VOL_RAMP */
+#define WM8741_VOL_RAMP_MASK                    0x0001  /* VOL_RAMP */
+#define WM8741_VOL_RAMP_SHIFT                        0  /* VOL_RAMP */
+#define WM8741_VOL_RAMP_WIDTH                        1  /* VOL_RAMP */
+
+/*
+ * R5 (0x05) - FORMAT_CONTROL
+ */
+#define WM8741_PWDN                             0x0080  /* PWDN */
+#define WM8741_PWDN_MASK                        0x0080  /* PWDN */
+#define WM8741_PWDN_SHIFT                            7  /* PWDN */
+#define WM8741_PWDN_WIDTH                            1  /* PWDN */
+#define WM8741_REV                              0x0040  /* REV */
+#define WM8741_REV_MASK                         0x0040  /* REV */
+#define WM8741_REV_SHIFT                             6  /* REV */
+#define WM8741_REV_WIDTH                             1  /* REV */
+#define WM8741_BCP                              0x0020  /* BCP */
+#define WM8741_BCP_MASK                         0x0020  /* BCP */
+#define WM8741_BCP_SHIFT                             5  /* BCP */
+#define WM8741_BCP_WIDTH                             1  /* BCP */
+#define WM8741_LRP                              0x0010  /* LRP */
+#define WM8741_LRP_MASK                         0x0010  /* LRP */
+#define WM8741_LRP_SHIFT                             4  /* LRP */
+#define WM8741_LRP_WIDTH                             1  /* LRP */
+#define WM8741_FMT_MASK                         0x000C  /* FMT - [3:2] */
+#define WM8741_FMT_SHIFT                             2  /* FMT - [3:2] */
+#define WM8741_FMT_WIDTH                             2  /* FMT - [3:2] */
+#define WM8741_IWL_MASK                         0x0003  /* IWL - [1:0] */
+#define WM8741_IWL_SHIFT                             0  /* IWL - [1:0] */
+#define WM8741_IWL_WIDTH                             2  /* IWL - [1:0] */
+
+/*
+ * R6 (0x06) - FILTER_CONTROL
+ */
+#define WM8741_ZFLAG_HI                         0x0080  /* ZFLAG_HI */
+#define WM8741_ZFLAG_HI_MASK                    0x0080  /* ZFLAG_HI */
+#define WM8741_ZFLAG_HI_SHIFT                        7  /* ZFLAG_HI */
+#define WM8741_ZFLAG_HI_WIDTH                        1  /* ZFLAG_HI */
+#define WM8741_DEEMPH_MASK                      0x0060  /* DEEMPH - [6:5] */
+#define WM8741_DEEMPH_SHIFT                          5  /* DEEMPH - [6:5] */
+#define WM8741_DEEMPH_WIDTH                          2  /* DEEMPH - [6:5] */
+#define WM8741_DSDFILT_MASK                     0x0018  /* DSDFILT - [4:3] */
+#define WM8741_DSDFILT_SHIFT                         3  /* DSDFILT - [4:3] */
+#define WM8741_DSDFILT_WIDTH                         2  /* DSDFILT - [4:3] */
+#define WM8741_FIRSEL_MASK                      0x0007  /* FIRSEL - [2:0] */
+#define WM8741_FIRSEL_SHIFT                          0  /* FIRSEL - [2:0] */
+#define WM8741_FIRSEL_WIDTH                          3  /* FIRSEL - [2:0] */
+
+/*
+ * R7 (0x07) - MODE_CONTROL_1
+ */
+#define WM8741_MODE8X                           0x0080  /* MODE8X */
+#define WM8741_MODE8X_MASK                      0x0080  /* MODE8X */
+#define WM8741_MODE8X_SHIFT                          7  /* MODE8X */
+#define WM8741_MODE8X_WIDTH                          1  /* MODE8X */
+#define WM8741_OSR_MASK                         0x0060  /* OSR - [6:5] */
+#define WM8741_OSR_SHIFT                             5  /* OSR - [6:5] */
+#define WM8741_OSR_WIDTH                             2  /* OSR - [6:5] */
+#define WM8741_SR_MASK                          0x001C  /* SR - [4:2] */
+#define WM8741_SR_SHIFT                              2  /* SR - [4:2] */
+#define WM8741_SR_WIDTH                              3  /* SR - [4:2] */
+#define WM8741_MODESEL_MASK                     0x0003  /* MODESEL - [1:0] */
+#define WM8741_MODESEL_SHIFT                         0  /* MODESEL - [1:0] */
+#define WM8741_MODESEL_WIDTH                         2  /* MODESEL - [1:0] */
+
+/*
+ * R8 (0x08) - MODE_CONTROL_2
+ */
+#define WM8741_DSD_GAIN                         0x0040  /* DSD_GAIN */
+#define WM8741_DSD_GAIN_MASK                    0x0040  /* DSD_GAIN */
+#define WM8741_DSD_GAIN_SHIFT                        6  /* DSD_GAIN */
+#define WM8741_DSD_GAIN_WIDTH                        1  /* DSD_GAIN */
+#define WM8741_SDOUT                            0x0020  /* SDOUT */
+#define WM8741_SDOUT_MASK                       0x0020  /* SDOUT */
+#define WM8741_SDOUT_SHIFT                           5  /* SDOUT */
+#define WM8741_SDOUT_WIDTH                           1  /* SDOUT */
+#define WM8741_DOUT                             0x0010  /* DOUT */
+#define WM8741_DOUT_MASK                        0x0010  /* DOUT */
+#define WM8741_DOUT_SHIFT                            4  /* DOUT */
+#define WM8741_DOUT_WIDTH                            1  /* DOUT */
+#define WM8741_DIFF_MASK                        0x000C  /* DIFF - [3:2] */
+#define WM8741_DIFF_SHIFT                            2  /* DIFF - [3:2] */
+#define WM8741_DIFF_WIDTH                            2  /* DIFF - [3:2] */
+#define WM8741_DITHER_MASK                      0x0003  /* DITHER - [1:0] */
+#define WM8741_DITHER_SHIFT                          0  /* DITHER - [1:0] */
+#define WM8741_DITHER_WIDTH                          2  /* DITHER - [1:0] */
+
+/*
+ * R32 (0x20) - ADDITONAL_CONTROL_1
+ */
+#define WM8741_DSD_LEVEL                        0x0002  /* DSD_LEVEL */
+#define WM8741_DSD_LEVEL_MASK                   0x0002  /* DSD_LEVEL */
+#define WM8741_DSD_LEVEL_SHIFT                       1  /* DSD_LEVEL */
+#define WM8741_DSD_LEVEL_WIDTH                       1  /* DSD_LEVEL */
+#define WM8741_DSD_NO_NOTCH                     0x0001  /* DSD_NO_NOTCH */
+#define WM8741_DSD_NO_NOTCH_MASK                0x0001  /* DSD_NO_NOTCH */
+#define WM8741_DSD_NO_NOTCH_SHIFT                    0  /* DSD_NO_NOTCH */
+#define WM8741_DSD_NO_NOTCH_WIDTH                    1  /* DSD_NO_NOTCH */
+
+#define  WM8741_SYSCLK 0
+
+extern struct snd_soc_dai wm8741_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8741;
+
+#endif
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 9407e193fcc..e2c05e3e323 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -884,6 +884,7 @@ static int wm8750_i2c_remove(struct i2c_client *client)
 
 static const struct i2c_device_id wm8750_i2c_id[] = {
 	{ "wm8750", 0 },
+	{ "wm8987", 0 }, /* WM8987 is register compatible with WM8750 */
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm8750_i2c_id);
@@ -925,14 +926,22 @@ static int __devexit wm8750_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct spi_device_id wm8750_spi_id[] = {
+	{ "wm8750", 0 },
+	{ "wm8987", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, wm8750_spi_id);
+
 static struct spi_driver wm8750_spi_driver = {
 	.driver = {
-		.name	= "wm8750",
+		.name	= "WM8750 SPI Codec",
 		.bus	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= wm8750_spi_probe,
 	.remove		= __devexit_p(wm8750_spi_remove),
+	.id_table	= wm8750_spi_id,
 };
 #endif
 
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 87f14f8675f..f7dcabf6283 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -2433,7 +2433,8 @@ static int wm8904_register(struct wm8904_priv *wm8904,
 
 	if (wm8904_codec) {
 		dev_err(codec->dev, "Another WM8904 is registered\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	mutex_init(&codec->mutex);
@@ -2462,7 +2463,8 @@ static int wm8904_register(struct wm8904_priv *wm8904,
 	default:
 		dev_err(codec->dev, "Unknown device type %d\n",
 			wm8904->devtype);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	memcpy(codec->reg_cache, wm8904_reg, sizeof(wm8904_reg));
@@ -2566,18 +2568,19 @@ static int wm8904_register(struct wm8904_priv *wm8904,
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		return ret;
+		goto err_enable;
 	}
 
 	ret = snd_soc_register_dai(&wm8904_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
-		return ret;
+		goto err_codec;
 	}
 
 	return 0;
 
+err_codec:
+	snd_soc_unregister_codec(codec);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
 err_get:
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index e3c4bbfaae2..f0c11138e61 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -845,6 +845,7 @@ static void wm8940_unregister(struct wm8940_priv *wm8940)
 static int wm8940_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
+	int ret;
 	struct wm8940_priv *wm8940;
 	struct snd_soc_codec *codec;
 
@@ -858,7 +859,11 @@ static int wm8940_i2c_probe(struct i2c_client *i2c,
 	codec->control_data = i2c;
 	codec->dev = &i2c->dev;
 
-	return wm8940_register(wm8940, SND_SOC_I2C);
+	ret = wm8940_register(wm8940, SND_SOC_I2C);
+	if (ret < 0)
+		kfree(wm8940);
+
+	return ret;
 }
 
 static int __devexit wm8940_i2c_remove(struct i2c_client *client)
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index fedb76452f1..5f025593d84 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -964,7 +964,8 @@ static int wm8955_register(struct wm8955_priv *wm8955,
 
 	if (wm8955_codec) {
 		dev_err(codec->dev, "Another WM8955 is registered\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	mutex_init(&codec->mutex);
@@ -1047,18 +1048,19 @@ static int wm8955_register(struct wm8955_priv *wm8955,
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		return ret;
+		goto err_enable;
 	}
 
 	ret = snd_soc_register_dai(&wm8955_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
-		return ret;
+		goto err_codec;
 	}
 
 	return 0;
 
+err_codec:
+	snd_soc_unregister_codec(codec);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8955->supplies), wm8955->supplies);
 err_get:
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 7233cc68435..3c6ee61f6c9 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -79,12 +79,13 @@ struct wm8960_priv {
 	struct snd_soc_dapm_widget *lout1;
 	struct snd_soc_dapm_widget *rout1;
 	struct snd_soc_dapm_widget *out3;
+	bool deemph;
+	int playback_fs;
 };
 
 #define wm8960_reset(c)	snd_soc_write(c, WM8960_RESET, 0)
 
 /* enumerated controls */
-static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
 static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
 	"Right Inverted", "Stereo Inversion"};
 static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"};
@@ -93,7 +94,6 @@ static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"};
 static const char *wm8960_alcmode[] = {"ALC", "Limiter"};
 
 static const struct soc_enum wm8960_enum[] = {
-	SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph),
 	SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity),
 	SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity),
 	SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff),
@@ -102,6 +102,59 @@ static const struct soc_enum wm8960_enum[] = {
 	SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode),
 };
 
+static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
+
+static int wm8960_set_deemph(struct snd_soc_codec *codec)
+{
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+	int val, i, best;
+
+	/* If we're using deemphasis select the nearest available sample
+	 * rate.
+	 */
+	if (wm8960->deemph) {
+		best = 1;
+		for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
+			if (abs(deemph_settings[i] - wm8960->playback_fs) <
+			    abs(deemph_settings[best] - wm8960->playback_fs))
+				best = i;
+		}
+
+		val = best << 1;
+	} else {
+		val = 0;
+	}
+
+	dev_dbg(codec->dev, "Set deemphasis %d\n", val);
+
+	return snd_soc_update_bits(codec, WM8960_DACCTL1,
+				   0x6, val);
+}
+
+static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+
+	return wm8960->deemph;
+}
+
+static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+	int deemph = ucontrol->value.enumerated.item[0];
+
+	if (deemph > 1)
+		return -EINVAL;
+
+	wm8960->deemph = deemph;
+
+	return wm8960_set_deemph(codec);
+}
+
 static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
 static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
 static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
@@ -131,23 +184,24 @@ SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0),
 SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0),
 
 SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0),
-SOC_ENUM("ADC Polarity", wm8960_enum[1]),
-SOC_ENUM("Playback De-emphasis", wm8960_enum[0]),
+SOC_ENUM("ADC Polarity", wm8960_enum[0]),
 SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0),
 
 SOC_ENUM("DAC Polarity", wm8960_enum[2]),
+SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
+		    wm8960_get_deemph, wm8960_put_deemph),
 
-SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]),
-SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]),
+SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]),
+SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]),
 SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
 SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0),
 
-SOC_ENUM("ALC Function", wm8960_enum[5]),
+SOC_ENUM("ALC Function", wm8960_enum[4]),
 SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0),
 SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1),
 SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0),
 SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0),
-SOC_ENUM("ALC Mode", wm8960_enum[6]),
+SOC_ENUM("ALC Mode", wm8960_enum[5]),
 SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0),
 SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0),
 
@@ -433,6 +487,21 @@ static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return 0;
 }
 
+static struct {
+	int rate;
+	unsigned int val;
+} alc_rates[] = {
+	{ 48000, 0 },
+	{ 44100, 0 },
+	{ 32000, 1 },
+	{ 22050, 2 },
+	{ 24000, 2 },
+	{ 16000, 3 },
+	{ 11250, 4 },
+	{ 12000, 4 },
+	{  8000, 5 },
+};
+
 static int wm8960_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params,
 			    struct snd_soc_dai *dai)
@@ -440,7 +509,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 	u16 iface = snd_soc_read(codec, WM8960_IFACE1) & 0xfff3;
+	int i;
 
 	/* bit size */
 	switch (params_format(params)) {
@@ -454,6 +525,18 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
+	/* Update filters for the new rate */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		wm8960->playback_fs = params_rate(params);
+		wm8960_set_deemph(codec);
+	} else {
+		for (i = 0; i < ARRAY_SIZE(alc_rates); i++)
+			if (alc_rates[i].rate == params_rate(params))
+				snd_soc_update_bits(codec,
+						    WM8960_ADDCTL3, 0x7,
+						    alc_rates[i].val);
+	}
+
 	/* set iface */
 	snd_soc_write(codec, WM8960_IFACE1, iface);
 	return 0;
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 5b9a756242f..2549d3a297a 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -1102,7 +1102,7 @@ static int wm8961_register(struct wm8961_priv *wm8961)
 	ret = wm8961_reset(codec);
 	if (ret < 0) {
 		dev_err(codec->dev, "Failed to issue reset\n");
-		return ret;
+		goto err;
 	}
 
 	/* Enable class W */
@@ -1147,18 +1147,19 @@ static int wm8961_register(struct wm8961_priv *wm8961)
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		return ret;
+		goto err;
 	}
 
 	ret = snd_soc_register_dai(&wm8961_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
-		return ret;
+		goto err_codec;
 	}
 
 	return 0;
 
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
 	kfree(wm8961);
 	return ret;
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index a2c4b2f37cc..1468fe10cbb 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -670,7 +670,8 @@ static __devinit int wm8974_register(struct wm8974_priv *wm8974)
 
 	if (wm8974_codec) {
 		dev_err(codec->dev, "Another WM8974 is registered\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	mutex_init(&codec->mutex);
diff --git a/sound/soc/codecs/wm8978.c b/sound/soc/codecs/wm8978.c
index 51d5f433215..8a1ad778e7e 100644
--- a/sound/soc/codecs/wm8978.c
+++ b/sound/soc/codecs/wm8978.c
@@ -1076,7 +1076,6 @@ static __devinit int wm8978_register(struct wm8978_priv *wm8978)
 err_codec:
 	snd_soc_unregister_codec(codec);
 err:
-	kfree(wm8978);
 	return ret;
 }
 
@@ -1085,13 +1084,13 @@ static __devexit void wm8978_unregister(struct wm8978_priv *wm8978)
 	wm8978_set_bias_level(&wm8978->codec, SND_SOC_BIAS_OFF);
 	snd_soc_unregister_dai(&wm8978_dai);
 	snd_soc_unregister_codec(&wm8978->codec);
-	kfree(wm8978);
 	wm8978_codec = NULL;
 }
 
 static __devinit int wm8978_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
+	int ret;
 	struct wm8978_priv *wm8978;
 	struct snd_soc_codec *codec;
 
@@ -1107,13 +1106,18 @@ static __devinit int wm8978_i2c_probe(struct i2c_client *i2c,
 
 	codec->dev = &i2c->dev;
 
-	return wm8978_register(wm8978);
+	ret = wm8978_register(wm8978);
+	if (ret < 0)
+		kfree(wm8978);
+
+	return ret;
 }
 
 static __devexit int wm8978_i2c_remove(struct i2c_client *client)
 {
 	struct wm8978_priv *wm8978 = i2c_get_clientdata(client);
 	wm8978_unregister(wm8978);
+	kfree(wm8978);
 	return 0;
 }
 
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index c018772cc43..dd8d909788c 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -30,8 +30,6 @@
 
 #include "wm8990.h"
 
-#define WM8990_VERSION "0.2"
-
 /* codec private data */
 struct wm8990_priv {
 	unsigned int sysclk;
@@ -1511,8 +1509,6 @@ static int wm8990_probe(struct platform_device *pdev)
 	struct wm8990_priv *wm8990;
 	int ret;
 
-	pr_info("WM8990 Audio Codec %s\n", WM8990_VERSION);
-
 	setup = socdev->codec_data;
 	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
 	if (codec == NULL)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index e84a1177f35..a87046a96f2 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1677,6 +1677,26 @@ static struct {
 
 static int wm8994_readable(unsigned int reg)
 {
+	switch (reg) {
+	case WM8994_GPIO_1:
+	case WM8994_GPIO_2:
+	case WM8994_GPIO_3:
+	case WM8994_GPIO_4:
+	case WM8994_GPIO_5:
+	case WM8994_GPIO_6:
+	case WM8994_GPIO_7:
+	case WM8994_GPIO_8:
+	case WM8994_GPIO_9:
+	case WM8994_GPIO_10:
+	case WM8994_GPIO_11:
+	case WM8994_INTERRUPT_STATUS_1:
+	case WM8994_INTERRUPT_STATUS_2:
+	case WM8994_INTERRUPT_RAW_STATUS_2:
+		return 1;
+	default:
+		break;
+	}
+
 	if (reg >= ARRAY_SIZE(access_masks))
 		return 0;
 	return access_masks[reg].readable != 0;
@@ -2341,6 +2361,20 @@ SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING,
 		0, 1, 0),
 };
 
+static const struct snd_kcontrol_new aif1adc2l_mix[] = {
+SOC_DAPM_SINGLE("DMIC Switch", WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING,
+		1, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING,
+		0, 1, 0),
+};
+
+static const struct snd_kcontrol_new aif1adc2r_mix[] = {
+SOC_DAPM_SINGLE("DMIC Switch", WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING,
+		1, 1, 0),
+SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING,
+		0, 1, 0),
+};
+
 static const struct snd_kcontrol_new aif2dac2l_mix[] = {
 SOC_DAPM_SINGLE("Right Sidetone Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
 		5, 1, 0),
@@ -2472,6 +2506,7 @@ static const struct snd_kcontrol_new aif3adc_mux =
 static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
 SND_SOC_DAPM_INPUT("DMIC1DAT"),
 SND_SOC_DAPM_INPUT("DMIC2DAT"),
+SND_SOC_DAPM_INPUT("Clock"),
 
 SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event,
 		    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
@@ -2506,6 +2541,11 @@ SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0,
 SND_SOC_DAPM_MIXER("AIF1ADC1R Mixer", SND_SOC_NOPM, 0, 0,
 		   aif1adc1r_mix, ARRAY_SIZE(aif1adc1r_mix)),
 
+SND_SOC_DAPM_MIXER("AIF1ADC2L Mixer", SND_SOC_NOPM, 0, 0,
+		   aif1adc2l_mix, ARRAY_SIZE(aif1adc2l_mix)),
+SND_SOC_DAPM_MIXER("AIF1ADC2R Mixer", SND_SOC_NOPM, 0, 0,
+		   aif1adc2r_mix, ARRAY_SIZE(aif1adc2r_mix)),
+
 SND_SOC_DAPM_MIXER("AIF2DAC2L Mixer", SND_SOC_NOPM, 0, 0,
 		   aif2dac2l_mix, ARRAY_SIZE(aif2dac2l_mix)),
 SND_SOC_DAPM_MIXER("AIF2DAC2R Mixer", SND_SOC_NOPM, 0, 0,
@@ -2668,6 +2708,14 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{ "AIF1ADC1R Mixer", "ADC/DMIC Switch", "ADCR Mux" },
 	{ "AIF1ADC1R Mixer", "AIF2 Switch", "AIF2DACR" },
 
+	{ "AIF1ADC2L", NULL, "AIF1ADC2L Mixer" },
+	{ "AIF1ADC2L Mixer", "DMIC Switch", "DMIC2L" },
+	{ "AIF1ADC2L Mixer", "AIF2 Switch", "AIF2DACL" },
+
+	{ "AIF1ADC2R", NULL, "AIF1ADC2R Mixer" },
+	{ "AIF1ADC2R Mixer", "DMIC Switch", "DMIC2R" },
+	{ "AIF1ADC2R Mixer", "AIF2 Switch", "AIF2DACR" },
+
 	/* Pin level routing for AIF3 */
 	{ "AIF1DAC1L", NULL, "AIF1DAC Mux" },
 	{ "AIF1DAC1R", NULL, "AIF1DAC Mux" },
@@ -2946,11 +2994,14 @@ static int wm8994_set_fll(struct snd_soc_dai *dai, int id, int src,
 	return 0;
 }
 
+static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
+
 static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = dai->codec;
 	struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
+	int i;
 
 	switch (dai->id) {
 	case 1:
@@ -2988,6 +3039,25 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 		dev_dbg(dai->dev, "AIF%d using FLL2\n", dai->id);
 		break;
 
+	case WM8994_SYSCLK_OPCLK:
+		/* Special case - a division (times 10) is given and
+		 * no effect on main clocking. 
+		 */
+		if (freq) {
+			for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
+				if (opclk_divs[i] == freq)
+					break;
+			if (i == ARRAY_SIZE(opclk_divs))
+				return -EINVAL;
+			snd_soc_update_bits(codec, WM8994_CLOCKING_2,
+					    WM8994_OPCLK_DIV_MASK, i);
+			snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
+		} else {
+			snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, 0);
+		}
+
 	default:
 		return -EINVAL;
 	}
@@ -4004,6 +4074,11 @@ static int wm8994_codec_probe(struct platform_device *pdev)
 			    1 << WM8994_AIF2DAC_3D_GAIN_SHIFT,
 			    1 << WM8994_AIF2DAC_3D_GAIN_SHIFT);
 
+	/* Unconditionally enable AIF1 ADC TDM mode; it only affects
+	 * behaviour on idle TDM clock cycles. */
+	snd_soc_update_bits(codec, WM8994_AIF1_CONTROL_1,
+			    WM8994_AIF1ADC_TDM, WM8994_AIF1ADC_TDM);
+
 	wm8994_update_class_w(codec);
 
 	ret = snd_soc_register_codec(codec);
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
index 7072dc53935..2e0ca67a8df 100644
--- a/sound/soc/codecs/wm8994.h
+++ b/sound/soc/codecs/wm8994.h
@@ -20,6 +20,9 @@ extern struct snd_soc_dai wm8994_dai[];
 #define WM8994_SYSCLK_FLL1  3
 #define WM8994_SYSCLK_FLL2  4
 
+/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */
+#define WM8994_SYSCLK_OPCLK 5
+
 #define WM8994_FLL1 1
 #define WM8994_FLL2 2
 
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 13186fb4dcb..76b37ff6c26 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -1356,7 +1356,7 @@ static int wm9081_register(struct wm9081_priv *wm9081,
 	ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
-		return ret;
+		goto err;
 	}
 
 	reg = snd_soc_read(codec, WM9081_SOFTWARE_RESET);
@@ -1369,7 +1369,7 @@ static int wm9081_register(struct wm9081_priv *wm9081,
 	ret = wm9081_reset(codec);
 	if (ret < 0) {
 		dev_err(codec->dev, "Failed to issue reset\n");
-		return ret;
+		goto err;
 	}
 
 	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -1388,18 +1388,19 @@ static int wm9081_register(struct wm9081_priv *wm9081,
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		return ret;
+		goto err;
 	}
 
 	ret = snd_soc_register_dai(&wm9081_dai);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
-		snd_soc_unregister_codec(codec);
-		return ret;
+		goto err_codec;
 	}
 
 	return 0;
 
+err_codec:
+	snd_soc_unregister_codec(codec);
 err:
 	kfree(wm9081);
 	return ret;
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 16f1a57da08..2cb81538cd9 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -410,6 +410,8 @@ static int hp_event(struct snd_soc_dapm_widget *w,
 				    WM8993_HPOUT1L_DLY |
 				    WM8993_HPOUT1R_DLY, 0);
 
+		snd_soc_write(codec, WM8993_DC_SERVO_0, 0);
+
 		snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
 				    WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
 				    0);
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index adadcd3aa1b..9e8932abf15 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -26,6 +26,7 @@
 #include <mach/asp.h>
 
 #include "davinci-pcm.h"
+#include "davinci-i2s.h"
 
 
 /*
@@ -68,16 +69,21 @@
 #define DAVINCI_MCBSP_RCR_RDATDLY(v)	((v) << 16)
 #define DAVINCI_MCBSP_RCR_RFIG		(1 << 18)
 #define DAVINCI_MCBSP_RCR_RWDLEN2(v)	((v) << 21)
+#define DAVINCI_MCBSP_RCR_RFRLEN2(v)	((v) << 24)
+#define DAVINCI_MCBSP_RCR_RPHASE	BIT(31)
 
 #define DAVINCI_MCBSP_XCR_XWDLEN1(v)	((v) << 5)
 #define DAVINCI_MCBSP_XCR_XFRLEN1(v)	((v) << 8)
 #define DAVINCI_MCBSP_XCR_XDATDLY(v)	((v) << 16)
 #define DAVINCI_MCBSP_XCR_XFIG		(1 << 18)
 #define DAVINCI_MCBSP_XCR_XWDLEN2(v)	((v) << 21)
+#define DAVINCI_MCBSP_XCR_XFRLEN2(v)	((v) << 24)
+#define DAVINCI_MCBSP_XCR_XPHASE	BIT(31)
 
 #define DAVINCI_MCBSP_SRGR_FWID(v)	((v) << 8)
 #define DAVINCI_MCBSP_SRGR_FPER(v)	((v) << 16)
 #define DAVINCI_MCBSP_SRGR_FSGM		(1 << 28)
+#define DAVINCI_MCBSP_SRGR_CLKSM	BIT(29)
 
 #define DAVINCI_MCBSP_PCR_CLKRP		(1 << 0)
 #define DAVINCI_MCBSP_PCR_CLKXP		(1 << 1)
@@ -116,6 +122,7 @@ static const unsigned char double_fmt[SNDRV_PCM_FORMAT_S32_LE + 1] = {
 };
 
 struct davinci_mcbsp_dev {
+	struct device *dev;
 	struct davinci_pcm_dma_params	dma_params[2];
 	void __iomem			*base;
 #define MOD_DSP_A	0
@@ -144,6 +151,11 @@ struct davinci_mcbsp_dev {
 	 * won't end up being swapped because of the underrun.
 	 */
 	unsigned enable_channel_combine:1;
+
+	unsigned int fmt;
+	int clk_div;
+	int clk_input_pin;
+	bool i2s_accurate_sck;
 };
 
 static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -254,10 +266,12 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
 	unsigned int pcr;
 	unsigned int srgr;
+	/* Attention srgr is updated by hw_params! */
 	srgr = DAVINCI_MCBSP_SRGR_FSGM |
 		DAVINCI_MCBSP_SRGR_FPER(DEFAULT_BITPERSAMPLE * 2 - 1) |
 		DAVINCI_MCBSP_SRGR_FWID(DEFAULT_BITPERSAMPLE - 1);
 
+	dev->fmt = fmt;
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBS_CFS:
@@ -268,11 +282,26 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 			DAVINCI_MCBSP_PCR_CLKRM;
 		break;
 	case SND_SOC_DAIFMT_CBM_CFS:
-		/* McBSP CLKR pin is the input for the Sample Rate Generator.
-		 * McBSP FSR and FSX are driven by the Sample Rate Generator. */
-		pcr = DAVINCI_MCBSP_PCR_SCLKME |
-			DAVINCI_MCBSP_PCR_FSXM |
-			DAVINCI_MCBSP_PCR_FSRM;
+		pcr = DAVINCI_MCBSP_PCR_FSRM | DAVINCI_MCBSP_PCR_FSXM;
+		/*
+		 * Selection of the clock input pin that is the
+		 * input for the Sample Rate Generator.
+		 * McBSP FSR and FSX are driven by the Sample Rate
+		 * Generator.
+		 */
+		switch (dev->clk_input_pin) {
+		case MCBSP_CLKS:
+			pcr |= DAVINCI_MCBSP_PCR_CLKXM |
+				DAVINCI_MCBSP_PCR_CLKRM;
+			break;
+		case MCBSP_CLKR:
+			pcr |= DAVINCI_MCBSP_PCR_SCLKME;
+			break;
+		default:
+			dev_err(dev->dev, "bad clk_input_pin\n");
+			return -EINVAL;
+		}
+
 		break;
 	case SND_SOC_DAIFMT_CBM_CFM:
 		/* codec is master */
@@ -372,6 +401,18 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	return 0;
 }
 
+static int davinci_i2s_dai_set_clkdiv(struct snd_soc_dai *cpu_dai,
+				int div_id, int div)
+{
+	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
+
+	if (div_id != DAVINCI_MCBSP_CLKGDV)
+		return -ENODEV;
+
+	dev->clk_div = div;
+	return 0;
+}
+
 static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
@@ -380,8 +421,8 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct davinci_pcm_dma_params *dma_params =
 					&dev->dma_params[substream->stream];
 	struct snd_interval *i = NULL;
-	int mcbsp_word_length;
-	unsigned int rcr, xcr, srgr;
+	int mcbsp_word_length, master;
+	unsigned int rcr, xcr, srgr, clk_div, freq, framesize;
 	u32 spcr;
 	snd_pcm_format_t fmt;
 	unsigned element_cnt = 1;
@@ -396,12 +437,59 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 		davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, spcr);
 	}
 
-	i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS);
-	srgr = DAVINCI_MCBSP_SRGR_FSGM;
-	srgr |= DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1);
+	master = dev->fmt & SND_SOC_DAIFMT_MASTER_MASK;
+	fmt = params_format(params);
+	mcbsp_word_length = asp_word_length[fmt];
 
-	i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS);
-	srgr |= DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1);
+	switch (master) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		freq = clk_get_rate(dev->clk);
+		srgr = DAVINCI_MCBSP_SRGR_FSGM |
+		       DAVINCI_MCBSP_SRGR_CLKSM;
+		srgr |= DAVINCI_MCBSP_SRGR_FWID(mcbsp_word_length *
+						8 - 1);
+		if (dev->i2s_accurate_sck) {
+			clk_div = 256;
+			do {
+				framesize = (freq / (--clk_div)) /
+				params->rate_num *
+					params->rate_den;
+			} while (((framesize < 33) || (framesize > 4095)) &&
+				 (clk_div));
+			clk_div--;
+			srgr |= DAVINCI_MCBSP_SRGR_FPER(framesize - 1);
+		} else {
+			/* symmetric waveforms */
+			clk_div = freq / (mcbsp_word_length * 16) /
+				  params->rate_num * params->rate_den;
+			srgr |= DAVINCI_MCBSP_SRGR_FPER(mcbsp_word_length *
+							16 - 1);
+		}
+		clk_div &= 0xFF;
+		srgr |= clk_div;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		srgr = DAVINCI_MCBSP_SRGR_FSGM;
+		clk_div = dev->clk_div - 1;
+		srgr |= DAVINCI_MCBSP_SRGR_FWID(mcbsp_word_length * 8 - 1);
+		srgr |= DAVINCI_MCBSP_SRGR_FPER(mcbsp_word_length * 16 - 1);
+		clk_div &= 0xFF;
+		srgr |= clk_div;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Clock and frame sync given from external sources */
+		i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS);
+		srgr = DAVINCI_MCBSP_SRGR_FSGM;
+		srgr |= DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1);
+		pr_debug("%s - %d  FWID set: re-read srgr = %X\n",
+			__func__, __LINE__, snd_interval_value(i) - 1);
+
+		i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS);
+		srgr |= DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1);
+		break;
+	default:
+		return -EINVAL;
+	}
 	davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
 
 	rcr = DAVINCI_MCBSP_RCR_RFIG;
@@ -426,12 +514,41 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 			element_cnt = 1;
 			fmt = double_fmt[fmt];
 		}
+		switch (master) {
+		case SND_SOC_DAIFMT_CBS_CFS:
+		case SND_SOC_DAIFMT_CBS_CFM:
+			rcr |= DAVINCI_MCBSP_RCR_RFRLEN2(0);
+			xcr |= DAVINCI_MCBSP_XCR_XFRLEN2(0);
+			rcr |= DAVINCI_MCBSP_RCR_RPHASE;
+			xcr |= DAVINCI_MCBSP_XCR_XPHASE;
+			break;
+		case SND_SOC_DAIFMT_CBM_CFM:
+		case SND_SOC_DAIFMT_CBM_CFS:
+			rcr |= DAVINCI_MCBSP_RCR_RFRLEN2(element_cnt - 1);
+			xcr |= DAVINCI_MCBSP_XCR_XFRLEN2(element_cnt - 1);
+			break;
+		default:
+			return -EINVAL;
+		}
 	}
 	dma_params->acnt = dma_params->data_type = data_type[fmt];
 	dma_params->fifo_level = 0;
 	mcbsp_word_length = asp_word_length[fmt];
-	rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(element_cnt - 1);
-	xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(element_cnt - 1);
+
+	switch (master) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+	case SND_SOC_DAIFMT_CBS_CFM:
+		rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(0);
+		xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(0);
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+		rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(element_cnt - 1);
+		xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(element_cnt - 1);
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	rcr |= DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
 		DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length);
@@ -442,6 +559,10 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 		davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
 	else
 		davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
+
+	pr_debug("%s - %d  srgr=%X\n", __func__, __LINE__, srgr);
+	pr_debug("%s - %d  xcr=%X\n", __func__, __LINE__, xcr);
+	pr_debug("%s - %d  rcr=%X\n", __func__, __LINE__, rcr);
 	return 0;
 }
 
@@ -500,6 +621,7 @@ static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
 	.trigger	= davinci_i2s_trigger,
 	.hw_params	= davinci_i2s_hw_params,
 	.set_fmt	= davinci_i2s_set_dai_fmt,
+	.set_clkdiv	= davinci_i2s_dai_set_clkdiv,
 
 };
 
@@ -526,6 +648,8 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 	struct snd_platform_data *pdata = pdev->dev.platform_data;
 	struct davinci_mcbsp_dev *dev;
 	struct resource *mem, *ioarea, *res;
+	enum dma_event_q asp_chan_q = EVENTQ_0;
+	enum dma_event_q ram_chan_q = EVENTQ_1;
 	int ret;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -552,7 +676,17 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 			pdata->sram_size_playback;
 		dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].sram_size =
 			pdata->sram_size_capture;
+		dev->clk_input_pin = pdata->clk_input_pin;
+		dev->i2s_accurate_sck = pdata->i2s_accurate_sck;
+		asp_chan_q = pdata->asp_chan_q;
+		ram_chan_q = pdata->ram_chan_q;
 	}
+
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].asp_chan_q	= asp_chan_q;
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].ram_chan_q	= ram_chan_q;
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].asp_chan_q	= asp_chan_q;
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].ram_chan_q	= ram_chan_q;
+
 	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = -ENODEV;
@@ -584,6 +718,7 @@ static int davinci_i2s_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
+	dev->dev = &pdev->dev;
 
 	davinci_i2s_dai.private_data = dev;
 	davinci_i2s_dai.capture.dma_data = dev->dma_params;
diff --git a/sound/soc/davinci/davinci-i2s.h b/sound/soc/davinci/davinci-i2s.h
index 241648ce887..0b1e77b8c27 100644
--- a/sound/soc/davinci/davinci-i2s.h
+++ b/sound/soc/davinci/davinci-i2s.h
@@ -12,6 +12,11 @@
 #ifndef _DAVINCI_I2S_H
 #define _DAVINCI_I2S_H
 
+/* McBSP dividers */
+enum davinci_mcbsp_div {
+	DAVINCI_MCBSP_CLKGDV,              /* Sample rate generator divider */
+};
+
 extern struct snd_soc_dai davinci_i2s_dai;
 
 #endif
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index d3955096d87..b24720894af 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -890,7 +890,8 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	dev->rxnumevt = pdata->rxnumevt;
 
 	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
-	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->asp_chan_q = pdata->asp_chan_q;
+	dma_data->ram_chan_q = pdata->ram_chan_q;
 	dma_data->dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
 							io_v2p(dev->base));
 
@@ -904,7 +905,8 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	dma_data->channel = res->start;
 
 	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
-	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->asp_chan_q = pdata->asp_chan_q;
+	dma_data->ram_chan_q = pdata->ram_chan_q;
 	dma_data->dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
 							io_v2p(dev->base));
 
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 2dc406f42fe..a7124116d2e 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -381,7 +381,7 @@ static int request_ping_pong(struct snd_pcm_substream *substream,
 	/* Request ram master channel */
 	link = prtd->ram_channel = edma_alloc_channel(EDMA_CHANNEL_ANY,
 				  davinci_pcm_dma_irq, substream,
-				  EVENTQ_1);
+				  prtd->params->ram_chan_q);
 	if (link < 0)
 		goto exit1;
 
@@ -477,7 +477,8 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 
 	/* Request asp master DMA channel */
 	link = prtd->asp_channel = edma_alloc_channel(params->channel,
-			davinci_pcm_dma_irq, substream, EVENTQ_0);
+			davinci_pcm_dma_irq, substream,
+			prtd->params->asp_chan_q);
 	if (link < 0)
 		goto exit1;
 
@@ -800,7 +801,7 @@ static void davinci_pcm_free(struct snd_pcm *pcm)
 		dma_free_writecombine(pcm->card->dev, buf->bytes,
 				      buf->area, buf->addr);
 		buf->area = NULL;
-		iram_dma = (struct snd_dma_buffer *)buf->private_data;
+		iram_dma = buf->private_data;
 		if (iram_dma) {
 			sram_free(iram_dma->area, iram_dma->bytes);
 			kfree(iram_dma);
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 0764944cf10..b799a02333d 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -21,7 +21,8 @@ struct davinci_pcm_dma_params {
 	unsigned short acnt;
 	dma_addr_t dma_addr;		/* device physical address for DMA */
 	unsigned sram_size;
-	enum dma_event_q eventq_no;	/* event queue number */
+	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
+	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
 	unsigned char data_type;	/* xfer data type */
 	unsigned char convert_mono_stereo;
 	unsigned int fifo_level;
diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c
index 9aa980d3823..48678533da7 100644
--- a/sound/soc/davinci/davinci-vcif.c
+++ b/sound/soc/davinci/davinci-vcif.c
@@ -203,7 +203,7 @@ static int davinci_vcif_probe(struct platform_device *pdev)
 	int ret;
 
 	davinci_vcif_dev = kzalloc(sizeof(struct davinci_vcif_dev), GFP_KERNEL);
-	if (!davinci_vc) {
+	if (!davinci_vcif_dev) {
 		dev_dbg(&pdev->dev,
 			"could not allocate memory for private data\n");
 		return -ENOMEM;
diff --git a/sound/soc/ep93xx/Kconfig b/sound/soc/ep93xx/Kconfig
new file mode 100644
index 00000000000..f617f560f46
--- /dev/null
+++ b/sound/soc/ep93xx/Kconfig
@@ -0,0 +1,18 @@
+config SND_EP93XX_SOC
+	tristate "SoC Audio support for the Cirrus Logic EP93xx series"
+	depends on ARCH_EP93XX && SND_SOC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the EP93xx I2S interface.
+
+config SND_EP93XX_SOC_I2S
+	tristate
+
+config SND_EP93XX_SOC_SNAPPERCL15
+        tristate "SoC Audio support for Bluewater Systems Snapper CL15 module"
+        depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15
+        select SND_EP93XX_SOC_I2S
+        select SND_SOC_TLV320AIC23
+        help
+          Say Y or M here if you want to add support for I2S audio on the
+          Bluewater Systems Snapper CL15 module.
diff --git a/sound/soc/ep93xx/Makefile b/sound/soc/ep93xx/Makefile
new file mode 100644
index 00000000000..272e60f57b9
--- /dev/null
+++ b/sound/soc/ep93xx/Makefile
@@ -0,0 +1,11 @@
+# EP93xx Platform Support
+snd-soc-ep93xx-objs				:= ep93xx-pcm.o
+snd-soc-ep93xx-i2s-objs	 			:= ep93xx-i2s.o
+
+obj-$(CONFIG_SND_EP93XX_SOC)			+= snd-soc-ep93xx.o
+obj-$(CONFIG_SND_EP93XX_SOC_I2S)		+= snd-soc-ep93xx-i2s.o
+
+# EP93XX Machine Support
+snd-soc-snappercl15-objs			:= snappercl15.o
+
+obj-$(CONFIG_SND_EP93XX_SOC_SNAPPERCL15)	+= snd-soc-snappercl15.o
diff --git a/sound/soc/ep93xx/ep93xx-i2s.c b/sound/soc/ep93xx/ep93xx-i2s.c
new file mode 100644
index 00000000000..00b94663218
--- /dev/null
+++ b/sound/soc/ep93xx/ep93xx-i2s.c
@@ -0,0 +1,487 @@
+/*
+ * linux/sound/soc/ep93xx-i2s.c
+ * EP93xx I2S driver
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on the original driver by:
+ *   Copyright (C) 2007 Chase Douglas <chasedouglas@gmail>
+ *   Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+#include <mach/ep93xx-regs.h>
+#include <mach/dma.h>
+
+#include "ep93xx-pcm.h"
+#include "ep93xx-i2s.h"
+
+#define EP93XX_I2S_TXCLKCFG		0x00
+#define EP93XX_I2S_RXCLKCFG		0x04
+#define EP93XX_I2S_GLCTRL		0x0C
+
+#define EP93XX_I2S_TXLINCTRLDATA	0x28
+#define EP93XX_I2S_TXCTRL		0x2C
+#define EP93XX_I2S_TXWRDLEN		0x30
+#define EP93XX_I2S_TX0EN		0x34
+
+#define EP93XX_I2S_RXLINCTRLDATA	0x58
+#define EP93XX_I2S_RXCTRL		0x5C
+#define EP93XX_I2S_RXWRDLEN		0x60
+#define EP93XX_I2S_RX0EN		0x64
+
+#define EP93XX_I2S_WRDLEN_16		(0 << 0)
+#define EP93XX_I2S_WRDLEN_24		(1 << 0)
+#define EP93XX_I2S_WRDLEN_32		(2 << 0)
+
+#define EP93XX_I2S_LINCTRLDATA_R_JUST	(1 << 2) /* Right justify */
+
+#define EP93XX_I2S_CLKCFG_LRS		(1 << 0) /* lrclk polarity */
+#define EP93XX_I2S_CLKCFG_CKP		(1 << 1) /* Bit clock polarity */
+#define EP93XX_I2S_CLKCFG_REL		(1 << 2) /* First bit transition */
+#define EP93XX_I2S_CLKCFG_MASTER	(1 << 3) /* Master mode */
+#define EP93XX_I2S_CLKCFG_NBCG		(1 << 4) /* Not bit clock gating */
+
+struct ep93xx_i2s_info {
+	struct clk			*mclk;
+	struct clk			*sclk;
+	struct clk			*lrclk;
+	struct ep93xx_pcm_dma_params	*dma_params;
+	struct resource			*mem;
+	void __iomem			*regs;
+};
+
+struct ep93xx_pcm_dma_params ep93xx_i2s_dma_params[] = {
+	[SNDRV_PCM_STREAM_PLAYBACK] = {
+		.name		= "i2s-pcm-out",
+		.dma_port	= EP93XX_DMA_M2P_PORT_I2S1,
+	},
+	[SNDRV_PCM_STREAM_CAPTURE] = {
+		.name		= "i2s-pcm-in",
+		.dma_port	= EP93XX_DMA_M2P_PORT_I2S1,
+	},
+};
+
+static inline void ep93xx_i2s_write_reg(struct ep93xx_i2s_info *info,
+					unsigned reg, unsigned val)
+{
+	__raw_writel(val, info->regs + reg);
+}
+
+static inline unsigned ep93xx_i2s_read_reg(struct ep93xx_i2s_info *info,
+					   unsigned reg)
+{
+	return __raw_readl(info->regs + reg);
+}
+
+static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
+{
+	unsigned base_reg;
+	int i;
+
+	if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
+	    (ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
+		/* Enable clocks */
+		clk_enable(info->mclk);
+		clk_enable(info->sclk);
+		clk_enable(info->lrclk);
+
+		/* Enable i2s */
+		ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
+	}
+
+	/* Enable fifos */
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+		base_reg = EP93XX_I2S_TX0EN;
+	else
+		base_reg = EP93XX_I2S_RX0EN;
+	for (i = 0; i < 3; i++)
+		ep93xx_i2s_write_reg(info, base_reg + (i * 4), 1);
+}
+
+static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
+{
+	unsigned base_reg;
+	int i;
+
+	/* Disable fifos */
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+		base_reg = EP93XX_I2S_TX0EN;
+	else
+		base_reg = EP93XX_I2S_RX0EN;
+	for (i = 0; i < 3; i++)
+		ep93xx_i2s_write_reg(info, base_reg + (i * 4), 0);
+
+	if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
+	    (ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
+		/* Disable i2s */
+		ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 0);
+
+		/* Disable clocks */
+		clk_disable(info->lrclk);
+		clk_disable(info->sclk);
+		clk_disable(info->mclk);
+	}
+}
+
+static int ep93xx_i2s_startup(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct ep93xx_i2s_info *info = rtd->dai->cpu_dai->private_data;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream,
+				 &info->dma_params[substream->stream]);
+	return 0;
+}
+
+static void ep93xx_i2s_shutdown(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct ep93xx_i2s_info *info = rtd->dai->cpu_dai->private_data;
+
+	ep93xx_i2s_disable(info, substream->stream);
+}
+
+static int ep93xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+				  unsigned int fmt)
+{
+	struct ep93xx_i2s_info *info = cpu_dai->private_data;
+	unsigned int clk_cfg, lin_ctrl;
+
+	clk_cfg  = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXCLKCFG);
+	lin_ctrl = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXLINCTRLDATA);
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		clk_cfg |= EP93XX_I2S_CLKCFG_REL;
+		lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
+		break;
+
+	case SND_SOC_DAIFMT_LEFT_J:
+		clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
+		lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
+		break;
+
+	case SND_SOC_DAIFMT_RIGHT_J:
+		clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
+		lin_ctrl |= EP93XX_I2S_LINCTRLDATA_R_JUST;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* CPU is master */
+		clk_cfg |= EP93XX_I2S_CLKCFG_MASTER;
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Codec is master */
+		clk_cfg &= ~EP93XX_I2S_CLKCFG_MASTER;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* Negative bit clock, lrclk low on left word */
+		clk_cfg &= ~(EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL);
+		break;
+
+	case SND_SOC_DAIFMT_NB_IF:
+		/* Negative bit clock, lrclk low on right word */
+		clk_cfg &= ~EP93XX_I2S_CLKCFG_CKP;
+		clk_cfg |= EP93XX_I2S_CLKCFG_REL;
+		break;
+
+	case SND_SOC_DAIFMT_IB_NF:
+		/* Positive bit clock, lrclk low on left word */
+		clk_cfg |= EP93XX_I2S_CLKCFG_CKP;
+		clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
+		break;
+
+	case SND_SOC_DAIFMT_IB_IF:
+		/* Positive bit clock, lrclk low on right word */
+		clk_cfg |= EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL;
+		break;
+	}
+
+	/* Write new register values */
+	ep93xx_i2s_write_reg(info, EP93XX_I2S_RXCLKCFG, clk_cfg);
+	ep93xx_i2s_write_reg(info, EP93XX_I2S_TXCLKCFG, clk_cfg);
+	ep93xx_i2s_write_reg(info, EP93XX_I2S_RXLINCTRLDATA, lin_ctrl);
+	ep93xx_i2s_write_reg(info, EP93XX_I2S_TXLINCTRLDATA, lin_ctrl);
+	return 0;
+}
+
+static int ep93xx_i2s_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct ep93xx_i2s_info *info = cpu_dai->private_data;
+	unsigned word_len, div, sdiv, lrdiv;
+	int found = 0, err;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		word_len = EP93XX_I2S_WRDLEN_16;
+		break;
+
+	case SNDRV_PCM_FORMAT_S24_LE:
+		word_len = EP93XX_I2S_WRDLEN_24;
+		break;
+
+	case SNDRV_PCM_FORMAT_S32_LE:
+		word_len = EP93XX_I2S_WRDLEN_32;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		ep93xx_i2s_write_reg(info, EP93XX_I2S_TXWRDLEN, word_len);
+	else
+		ep93xx_i2s_write_reg(info, EP93XX_I2S_RXWRDLEN, word_len);
+
+	/*
+	 * Calculate the sdiv (bit clock) and lrdiv (left/right clock) values.
+	 * If the lrclk is pulse length is larger than the word size, then the
+	 * bit clock will be gated for the unused bits.
+	 */
+	div = (clk_get_rate(info->mclk) / params_rate(params)) *
+		params_channels(params);
+	for (sdiv = 2; sdiv <= 4; sdiv += 2)
+		for (lrdiv = 32; lrdiv <= 128; lrdiv <<= 1)
+			if (sdiv * lrdiv == div) {
+				found = 1;
+				goto out;
+			}
+out:
+	if (!found)
+		return -EINVAL;
+
+	err = clk_set_rate(info->sclk, clk_get_rate(info->mclk) / sdiv);
+	if (err)
+		return err;
+
+	err = clk_set_rate(info->lrclk, clk_get_rate(info->sclk) / lrdiv);
+	if (err)
+		return err;
+
+	ep93xx_i2s_enable(info, substream->stream);
+	return 0;
+}
+
+static int ep93xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
+				 unsigned int freq, int dir)
+{
+	struct ep93xx_i2s_info *info = cpu_dai->private_data;
+
+	if (dir == SND_SOC_CLOCK_IN || clk_id != 0)
+		return -EINVAL;
+
+	return clk_set_rate(info->mclk, freq);
+}
+
+#ifdef CONFIG_PM
+static int ep93xx_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct ep93xx_i2s_info *info = dai->private_data;
+
+	if (!dai->active)
+		return;
+
+	ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_PLAYBACK);
+	ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_CAPTURE);
+}
+
+static int ep93xx_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct ep93xx_i2s_info *info = dai->private_data;
+
+	if (!dai->active)
+		return;
+
+	ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_PLAYBACK);
+	ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_CAPTURE);
+}
+#else
+#define ep93xx_i2s_suspend	NULL
+#define ep93xx_i2s_resume	NULL
+#endif
+
+static struct snd_soc_dai_ops ep93xx_i2s_dai_ops = {
+	.startup	= ep93xx_i2s_startup,
+	.shutdown	= ep93xx_i2s_shutdown,
+	.hw_params	= ep93xx_i2s_hw_params,
+	.set_sysclk	= ep93xx_i2s_set_sysclk,
+	.set_fmt	= ep93xx_i2s_set_dai_fmt,
+};
+
+#define EP93XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+			    SNDRV_PCM_FMTBIT_S24_LE | \
+			    SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai ep93xx_i2s_dai = {
+	.name		= "ep93xx-i2s",
+	.id		= 0,
+	.symmetric_rates= 1,
+	.suspend	= ep93xx_i2s_suspend,
+	.resume		= ep93xx_i2s_resume,
+	.playback	= {
+		.channels_min	= 2,
+		.channels_max	= 2,
+		.rates		= SNDRV_PCM_RATE_8000_48000,
+		.formats	= EP93XX_I2S_FORMATS,
+	},
+	.capture	= {
+		 .channels_min	= 2,
+		 .channels_max	= 2,
+		 .rates		= SNDRV_PCM_RATE_8000_48000,
+		 .formats	= EP93XX_I2S_FORMATS,
+	},
+	.ops		= &ep93xx_i2s_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ep93xx_i2s_dai);
+
+static int ep93xx_i2s_probe(struct platform_device *pdev)
+{
+	struct ep93xx_i2s_info *info;
+	struct resource *res;
+	int err;
+
+	info = kzalloc(sizeof(struct ep93xx_i2s_info), GFP_KERNEL);
+	if (!info) {
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	ep93xx_i2s_dai.dev = &pdev->dev;
+	ep93xx_i2s_dai.private_data = info;
+	info->dma_params = ep93xx_i2s_dma_params;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENODEV;
+		goto fail;
+	}
+
+	info->mem = request_mem_region(res->start, resource_size(res),
+				       pdev->name);
+	if (!info->mem) {
+		err = -EBUSY;
+		goto fail;
+	}
+
+	info->regs = ioremap(info->mem->start, resource_size(info->mem));
+	if (!info->regs) {
+		err = -ENXIO;
+		goto fail_release_mem;
+	}
+
+	info->mclk = clk_get(&pdev->dev, "mclk");
+	if (IS_ERR(info->mclk)) {
+		err = PTR_ERR(info->mclk);
+		goto fail_unmap_mem;
+	}
+
+	info->sclk = clk_get(&pdev->dev, "sclk");
+	if (IS_ERR(info->sclk)) {
+		err = PTR_ERR(info->sclk);
+		goto fail_put_mclk;
+	}
+
+	info->lrclk = clk_get(&pdev->dev, "lrclk");
+	if (IS_ERR(info->lrclk)) {
+		err = PTR_ERR(info->lrclk);
+		goto fail_put_sclk;
+	}
+
+	err = snd_soc_register_dai(&ep93xx_i2s_dai);
+	if (err)
+		goto fail_put_lrclk;
+
+	return 0;
+
+fail_put_lrclk:
+	clk_put(info->lrclk);
+fail_put_sclk:
+	clk_put(info->sclk);
+fail_put_mclk:
+	clk_put(info->mclk);
+fail_unmap_mem:
+	iounmap(info->regs);
+fail_release_mem:
+	release_mem_region(info->mem->start, resource_size(info->mem));
+	kfree(info);
+fail:
+	return err;
+}
+
+static int __devexit ep93xx_i2s_remove(struct platform_device *pdev)
+{
+	struct ep93xx_i2s_info *info = ep93xx_i2s_dai.private_data;
+
+	snd_soc_unregister_dai(&ep93xx_i2s_dai);
+	clk_put(info->lrclk);
+	clk_put(info->sclk);
+	clk_put(info->mclk);
+	iounmap(info->regs);
+	release_mem_region(info->mem->start, resource_size(info->mem));
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver ep93xx_i2s_driver = {
+	.probe	= ep93xx_i2s_probe,
+	.remove	= __devexit_p(ep93xx_i2s_remove),
+	.driver	= {
+		.name	= "ep93xx-i2s",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ep93xx_i2s_init(void)
+{
+	return platform_driver_register(&ep93xx_i2s_driver);
+}
+
+static void __exit ep93xx_i2s_exit(void)
+{
+	platform_driver_unregister(&ep93xx_i2s_driver);
+}
+
+module_init(ep93xx_i2s_init);
+module_exit(ep93xx_i2s_exit);
+
+MODULE_ALIAS("platform:ep93xx-i2s");
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("EP93XX I2S driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/ep93xx/ep93xx-i2s.h b/sound/soc/ep93xx/ep93xx-i2s.h
new file mode 100644
index 00000000000..3bd4ebfaa1d
--- /dev/null
+++ b/sound/soc/ep93xx/ep93xx-i2s.h
@@ -0,0 +1,18 @@
+/*
+ * linux/sound/soc/ep93xx-i2s.h
+ * EP93xx I2S driver
+ *
+ * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com>
+ *  
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _EP93XX_SND_SOC_I2S_H
+#define _EP93XX_SND_SOC_I2S_H
+
+extern struct snd_soc_dai ep93xx_i2s_dai;
+
+#endif /* _EP93XX_SND_SOC_I2S_H */
diff --git a/sound/soc/ep93xx/ep93xx-pcm.c b/sound/soc/ep93xx/ep93xx-pcm.c
new file mode 100644
index 00000000000..4ba93840079
--- /dev/null
+++ b/sound/soc/ep93xx/ep93xx-pcm.c
@@ -0,0 +1,319 @@
+/*
+ * linux/sound/arm/ep93xx-pcm.c - EP93xx ALSA PCM interface
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * Rewritten for the SoC audio subsystem (Based on PXA2xx code):
+ *   Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/ep93xx-regs.h>
+
+#include "ep93xx-pcm.h"
+
+static const struct snd_pcm_hardware ep93xx_pcm_hardware = {
+	.info			= (SNDRV_PCM_INFO_MMAP		|
+				   SNDRV_PCM_INFO_MMAP_VALID	|
+				   SNDRV_PCM_INFO_INTERLEAVED	|
+				   SNDRV_PCM_INFO_BLOCK_TRANSFER),
+				   
+	.rates			= SNDRV_PCM_RATE_8000_48000,
+	.rate_min		= SNDRV_PCM_RATE_8000,
+	.rate_max		= SNDRV_PCM_RATE_48000,
+	
+	.formats		= (SNDRV_PCM_FMTBIT_S16_LE |
+				   SNDRV_PCM_FMTBIT_S24_LE |
+				   SNDRV_PCM_FMTBIT_S32_LE),
+	
+	.buffer_bytes_max	= 131072,
+	.period_bytes_min	= 32,
+	.period_bytes_max	= 32768,
+	.periods_min		= 1,
+	.periods_max		= 32,
+	.fifo_size		= 32,
+};
+
+struct ep93xx_runtime_data
+{
+	struct ep93xx_dma_m2p_client	cl;
+	struct ep93xx_pcm_dma_params	*params;
+	int				pointer_bytes;
+	struct tasklet_struct		period_tasklet;
+	int				periods;
+	struct ep93xx_dma_buffer	buf[32];
+};
+
+static void ep93xx_pcm_period_elapsed(unsigned long data)
+{
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
+	snd_pcm_period_elapsed(substream);
+}
+
+static void ep93xx_pcm_buffer_started(void *cookie,
+				      struct ep93xx_dma_buffer *buf)
+{
+}
+
+static void ep93xx_pcm_buffer_finished(void *cookie, 
+				       struct ep93xx_dma_buffer *buf, 
+				       int bytes, int error)
+{
+	struct snd_pcm_substream *substream = cookie;
+	struct ep93xx_runtime_data *rtd = substream->runtime->private_data;
+
+	if (buf == rtd->buf + rtd->periods - 1)
+		rtd->pointer_bytes = 0;
+	else
+		rtd->pointer_bytes += buf->size;
+
+	if (!error) {
+		ep93xx_dma_m2p_submit_recursive(&rtd->cl, buf);
+		tasklet_schedule(&rtd->period_tasklet);
+	} else {
+		snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
+	}
+}
+
+static int ep93xx_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = soc_rtd->dai->cpu_dai;
+	struct ep93xx_pcm_dma_params *dma_params;
+	struct ep93xx_runtime_data *rtd;    
+	int ret;
+
+	dma_params = snd_soc_dai_get_dma_data(cpu_dai, substream);
+	snd_soc_set_runtime_hwparams(substream, &ep93xx_pcm_hardware);
+
+	rtd = kmalloc(sizeof(*rtd), GFP_KERNEL);
+	if (!rtd) 
+		return -ENOMEM;
+
+	memset(&rtd->period_tasklet, 0, sizeof(rtd->period_tasklet));
+	rtd->period_tasklet.func = ep93xx_pcm_period_elapsed;
+	rtd->period_tasklet.data = (unsigned long)substream;
+
+	rtd->cl.name = dma_params->name;
+	rtd->cl.flags = dma_params->dma_port | EP93XX_DMA_M2P_IGNORE_ERROR |
+		((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+		 EP93XX_DMA_M2P_TX : EP93XX_DMA_M2P_RX);
+	rtd->cl.cookie = substream;
+	rtd->cl.buffer_started = ep93xx_pcm_buffer_started;
+	rtd->cl.buffer_finished = ep93xx_pcm_buffer_finished;
+	ret = ep93xx_dma_m2p_client_register(&rtd->cl);
+	if (ret < 0) {
+		kfree(rtd);
+		return ret;
+	}
+	
+	substream->runtime->private_data = rtd;
+	return 0;
+}
+
+static int ep93xx_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct ep93xx_runtime_data *rtd = substream->runtime->private_data;
+
+	ep93xx_dma_m2p_client_unregister(&rtd->cl);
+	kfree(rtd);
+	return 0;
+}
+
+static int ep93xx_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ep93xx_runtime_data *rtd = runtime->private_data;
+	size_t totsize = params_buffer_bytes(params);
+	size_t period = params_period_bytes(params);
+	int i;
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = totsize;
+
+	rtd->periods = (totsize + period - 1) / period;
+	for (i = 0; i < rtd->periods; i++) {
+		rtd->buf[i].bus_addr = runtime->dma_addr + (i * period);
+		rtd->buf[i].size = period;
+		if ((i + 1) * period > totsize)
+			rtd->buf[i].size = totsize - (i * period);
+	}
+
+	return 0;
+}
+
+static int ep93xx_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+static int ep93xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct ep93xx_runtime_data *rtd = substream->runtime->private_data;
+	int ret;
+	int i;
+
+	ret = 0;
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		rtd->pointer_bytes = 0;
+		for (i = 0; i < rtd->periods; i++)
+			ep93xx_dma_m2p_submit(&rtd->cl, rtd->buf + i);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ep93xx_dma_m2p_flush(&rtd->cl);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static snd_pcm_uframes_t ep93xx_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct ep93xx_runtime_data *rtd = substream->runtime->private_data;
+
+	/* FIXME: implement this with sub-period granularity */
+	return bytes_to_frames(runtime, rtd->pointer_bytes);
+}
+
+static int ep93xx_pcm_mmap(struct snd_pcm_substream *substream,
+			   struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops ep93xx_pcm_ops = {
+	.open		= ep93xx_pcm_open,
+	.close		= ep93xx_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= ep93xx_pcm_hw_params,
+	.hw_free	= ep93xx_pcm_hw_free,
+	.trigger	= ep93xx_pcm_trigger,
+	.pointer	= ep93xx_pcm_pointer,
+	.mmap		= ep93xx_pcm_mmap,
+};
+
+static int ep93xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = ep93xx_pcm_hardware.buffer_bytes_max;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	buf->bytes = size;
+
+	return (buf->area == NULL) ? -ENOMEM : 0;
+}
+
+static void ep93xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++) {		
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+		
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes, buf->area,
+				      buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 ep93xx_pcm_dmamask = 0xffffffff;
+
+static int ep93xx_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+			  struct snd_pcm *pcm)
+{
+	int ret = 0;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &ep93xx_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (dai->playback.channels_min) {
+		ret = ep93xx_pcm_preallocate_dma_buffer(pcm,
+					SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			return ret;
+	}
+
+	if (dai->capture.channels_min) {
+		ret = ep93xx_pcm_preallocate_dma_buffer(pcm,
+					SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+struct snd_soc_platform ep93xx_soc_platform = {
+	.name		= "ep93xx-audio",
+	.pcm_ops	= &ep93xx_pcm_ops,
+	.pcm_new	= &ep93xx_pcm_new,
+	.pcm_free	= &ep93xx_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(ep93xx_soc_platform);
+
+static int __init ep93xx_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&ep93xx_soc_platform);
+}
+
+static void __exit ep93xx_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&ep93xx_soc_platform);
+}
+
+module_init(ep93xx_soc_platform_init);
+module_exit(ep93xx_soc_platform_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("EP93xx ALSA PCM interface");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/ep93xx/ep93xx-pcm.h b/sound/soc/ep93xx/ep93xx-pcm.h
new file mode 100644
index 00000000000..4ffdd3f62fe
--- /dev/null
+++ b/sound/soc/ep93xx/ep93xx-pcm.h
@@ -0,0 +1,22 @@
+/*
+ * sound/soc/ep93xx/ep93xx-pcm.h - EP93xx ALSA PCM interface
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2006 Applied Data Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EP93XX_SND_SOC_PCM_H
+#define _EP93XX_SND_SOC_PCM_H
+
+struct ep93xx_pcm_dma_params {
+	char	*name;
+	int	dma_port;
+};
+
+extern struct snd_soc_platform ep93xx_soc_platform;
+
+#endif /* _EP93XX_SND_SOC_PCM_H */
diff --git a/sound/soc/ep93xx/snappercl15.c b/sound/soc/ep93xx/snappercl15.c
new file mode 100644
index 00000000000..64955340ff7
--- /dev/null
+++ b/sound/soc/ep93xx/snappercl15.c
@@ -0,0 +1,150 @@
+/*
+ * snappercl15.c -- SoC audio for Bluewater Systems Snapper CL15 module
+ *
+ * Copyright (C) 2008 Bluewater Systems Ltd
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#include "../codecs/tlv320aic23.h"
+#include "ep93xx-pcm.h"
+#include "ep93xx-i2s.h"
+
+#define CODEC_CLOCK 5644800
+
+static int snappercl15_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int err;
+
+	err = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_IF |
+				  SND_SOC_DAIFMT_CBS_CFS);
+
+	err = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | 
+				  SND_SOC_DAIFMT_NB_IF |		  
+				  SND_SOC_DAIFMT_CBS_CFS);
+	if (err)
+		return err;
+
+	err = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_CLOCK, 
+				     SND_SOC_CLOCK_IN);
+	if (err)
+		return err;
+
+	err = snd_soc_dai_set_sysclk(cpu_dai, 0, CODEC_CLOCK, 
+				     SND_SOC_CLOCK_OUT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct snd_soc_ops snappercl15_ops = {
+	.hw_params	= snappercl15_hw_params,
+};
+
+static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_MIC("Mic Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	{"LLINEIN", NULL, "Line In"},
+	{"RLINEIN", NULL, "Line In"},
+
+	{"MICIN", NULL, "Mic Jack"},
+};
+
+static int snappercl15_tlv320aic23_init(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
+				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+	return 0;
+}
+
+static struct snd_soc_dai_link snappercl15_dai = {
+	.name		= "tlv320aic23",
+	.stream_name	= "AIC23",
+	.cpu_dai	= &ep93xx_i2s_dai,
+	.codec_dai	= &tlv320aic23_dai,
+	.init		= snappercl15_tlv320aic23_init,
+	.ops		= &snappercl15_ops,
+};
+
+static struct snd_soc_card snd_soc_snappercl15 = {
+	.name		= "Snapper CL15",
+	.platform	= &ep93xx_soc_platform,
+	.dai_link	= &snappercl15_dai,
+	.num_links	= 1,
+};
+
+static struct snd_soc_device snappercl15_snd_devdata = {
+	.card		= &snd_soc_snappercl15,
+	.codec_dev	= &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *snappercl15_snd_device;
+
+static int __init snappercl15_init(void)
+{
+	int ret;
+
+	if (!machine_is_snapper_cl15())
+		return -ENODEV;
+
+	ret = ep93xx_i2s_acquire(EP93XX_SYSCON_DEVCFG_I2SONAC97,
+				 EP93XX_SYSCON_I2SCLKDIV_ORIDE |
+				 EP93XX_SYSCON_I2SCLKDIV_SPOL);
+	if (ret)
+		return ret;
+
+	snappercl15_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!snappercl15_snd_device)
+		return -ENOMEM;
+	
+	platform_set_drvdata(snappercl15_snd_device, &snappercl15_snd_devdata);
+	snappercl15_snd_devdata.dev = &snappercl15_snd_device->dev;
+	ret = platform_device_add(snappercl15_snd_device);
+	if (ret)
+		platform_device_put(snappercl15_snd_device);
+
+	return ret;
+}
+
+static void __exit snappercl15_exit(void)
+{
+	platform_device_unregister(snappercl15_snd_device);
+	ep93xx_i2s_release();
+}
+
+module_init(snappercl15_init);
+module_exit(snappercl15_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("ALSA SoC Snapper CL15");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index e2ee220bfb7..e7f5d50ed08 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -20,6 +20,7 @@
 
 #include <asm/time.h>
 #include <asm/delay.h>
+#include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
 
 #include "mpc5200_dma.h"
@@ -100,19 +101,32 @@ static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
 {
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 
+	mutex_lock(&psc_dma->mutex);
+
 	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
 	udelay(3);
 	out_be32(&regs->sicr, psc_dma->sicr);
+
+	mutex_unlock(&psc_dma->mutex);
 }
 
 static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
 {
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 
-	/* Do a cold reset */
-	out_8(&regs->op1, MPC52xx_PSC_OP_RES);
-	udelay(10);
-	out_8(&regs->op0, MPC52xx_PSC_OP_RES);
+	mutex_lock(&psc_dma->mutex);
+	dev_dbg(psc_dma->dev, "cold reset\n");
+
+	mpc5200_psc_ac97_gpio_reset(psc_dma->id);
+
+	/* Notify the PSC that a reset has occurred */
+	out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_ACRB);
+
+	/* Re-enable RX and TX */
+	out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+
+	mutex_unlock(&psc_dma->mutex);
+
 	msleep(1);
 	psc_ac97_warm_reset(ac97);
 }
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 4f455bd6851..676841cbae9 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -16,7 +16,6 @@
 
 #include <asm/mpc52xx_psc.h>
 
-#include "mpc5200_psc_i2s.h"
 #include "mpc5200_dma.h"
 
 /**
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.h b/sound/soc/fsl/mpc5200_psc_i2s.h
deleted file mode 100644
index ce55e070fdf..00000000000
--- a/sound/soc/fsl/mpc5200_psc_i2s.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Freescale MPC5200 PSC in I2S mode
- * ALSA SoC Digital Audio Interface (DAI) driver
- *
- */
-
-#ifndef __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
-#define __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__
-
-extern struct snd_soc_dai psc_i2s_dai[];
-
-#endif /* __SOUND_SOC_FSL_MPC52xx_PSC_I2S_H__ */
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index 252defea93b..52dac5e3874 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -1,4 +1,4 @@
-config SND_IMX_SOC
+menuconfig SND_IMX_SOC
 	tristate "SoC Audio for Freescale i.MX CPUs"
 	depends on ARCH_MXC
 	select SND_PCM
@@ -8,14 +8,12 @@ config SND_IMX_SOC
 	  Say Y or M if you want to add support for codecs attached to
 	  the i.MX SSI interface.
 
-config SND_MXC_SOC_SSI
-	tristate
+if SND_IMX_SOC
 
 config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
-	depends on SND_IMX_SOC && MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
+	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
-	select SND_MXC_SOC_SSI
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
@@ -23,8 +21,17 @@ config SND_MXC_SOC_WM1133_EV1
 config SND_SOC_PHYCORE_AC97
 	tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
 	depends on MACH_PCM043 || MACH_PCA100
-	select SND_MXC_SOC_SSI
 	select SND_SOC_WM9712
 	help
 	  Say Y if you want to add support for SoC audio on Phytec phyCORE
 	  and phyCARD boards in AC97 mode
+
+config SND_SOC_EUKREA_TLV320
+	tristate "Eukrea TLV320"
+	depends on MACH_EUKREA_MBIMX27_BASEBOARD || MACH_EUKREA_MBIMXSD_BASEBOARD
+	select SND_SOC_TLV320AIC23
+	help
+	  Enable I2S based access to the TLV320AIC23B codec attached
+	  to the SSI interface
+
+endif	# SND_IMX_SOC
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
index 2d203635ac1..7bc57baf2b0 100644
--- a/sound/soc/imx/Makefile
+++ b/sound/soc/imx/Makefile
@@ -8,8 +8,10 @@ endif
 obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
 
 # i.MX Machine Support
+snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
 snd-soc-phycore-ac97-objs := phycore-ac97.o
 snd-soc-wm1133-ev1-objs := wm1133-ev1.o
 
+obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
 obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
 obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
new file mode 100644
index 00000000000..f15dfbdc47e
--- /dev/null
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -0,0 +1,137 @@
+/*
+ * eukrea-tlv320.c  --  SoC audio for eukrea_cpuimxXX in I2S mode
+ *
+ * Copyright 2010 Eric Bénard, Eukréa Electromatique <eric@eukrea.com>
+ *
+ * based on sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+ * which is Copyright 2009 Simtec Electronics
+ * and on sound/soc/imx/phycore-ac97.c which is
+ * Copyright 2009 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * 
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <asm/mach-types.h>
+
+#include "../codecs/tlv320aic23.h"
+#include "imx-ssi.h"
+
+#define CODEC_CLOCK 12000000
+
+static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set cpu dai format\n", __func__);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret) {
+		pr_err("%s: failed set codec dai format\n", __func__);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+				     CODEC_CLOCK, SND_SOC_CLOCK_OUT);
+	if (ret) {
+		pr_err("%s: failed setting codec sysclk\n", __func__);
+		return ret;
+	}
+	snd_soc_dai_set_tdm_slot(cpu_dai, 0xffffffc, 0xffffffc, 2, 0);
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, IMX_SSP_SYS_CLK, 0,
+				SND_SOC_CLOCK_IN);
+	if (ret) {
+		pr_err("can't set CPU system clock IMX_SSP_SYS_CLK\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops eukrea_tlv320_snd_ops = {
+	.hw_params	= eukrea_tlv320_hw_params,
+};
+
+static struct snd_soc_dai_link eukrea_tlv320_dai = {
+	.name		= "tlv320aic23",
+	.stream_name	= "TLV320AIC23",
+	.codec_dai	= &tlv320aic23_dai,
+	.ops		= &eukrea_tlv320_snd_ops,
+};
+
+static struct snd_soc_card eukrea_tlv320 = {
+	.name		= "cpuimx-audio",
+	.platform	= &imx_soc_platform,
+	.dai_link	= &eukrea_tlv320_dai,
+	.num_links	= 1,
+};
+
+static struct snd_soc_device eukrea_tlv320_snd_devdata = {
+	.card		= &eukrea_tlv320,
+	.codec_dev	= &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *eukrea_tlv320_snd_device;
+
+static int __init eukrea_tlv320_init(void)
+{
+	int ret;
+
+	if (!machine_is_eukrea_cpuimx27() && !machine_is_eukrea_cpuimx25sd()
+		&& !machine_is_eukrea_cpuimx35sd())
+		/* return happy. We might run on a totally different machine */
+		return 0;
+
+	eukrea_tlv320_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!eukrea_tlv320_snd_device)
+		return -ENOMEM;
+
+	eukrea_tlv320_dai.cpu_dai = &imx_ssi_pcm_dai[0];
+
+	platform_set_drvdata(eukrea_tlv320_snd_device, &eukrea_tlv320_snd_devdata);
+	eukrea_tlv320_snd_devdata.dev = &eukrea_tlv320_snd_device->dev;
+	ret = platform_device_add(eukrea_tlv320_snd_device);
+
+	if (ret) {
+		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
+		platform_device_put(eukrea_tlv320_snd_device);
+	}
+
+	return ret;
+}
+
+static void __exit eukrea_tlv320_exit(void)
+{
+	platform_device_unregister(eukrea_tlv320_snd_device);
+}
+
+module_init(eukrea_tlv320_init);
+module_exit(eukrea_tlv320_exit);
+
+MODULE_AUTHOR("Eric Bénard <eric@eukrea.com>");
+MODULE_DESCRIPTION("CPUIMX ALSA SoC driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index 05f19c9284f..0a595da4811 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -292,12 +292,16 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
 	int ret;
 
 	iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+	if (iprtd == NULL)
+		return -ENOMEM;
 	runtime->private_data = iprtd;
 
 	ret = snd_pcm_hw_constraint_integer(substream->runtime,
 			SNDRV_PCM_HW_PARAM_PERIODS);
-	if (ret < 0)
+	if (ret < 0) {
+		kfree(iprtd);
 		return ret;
+	}
 
 	snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
 	return 0;
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
index 6b518e07eea..b2bf27282cd 100644
--- a/sound/soc/imx/imx-pcm-fiq.c
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -192,6 +192,8 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
 	int ret;
 
 	iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
+	if (iprtd == NULL)
+		return -ENOMEM;
 	runtime->private_data = iprtd;
 
 	iprtd->substream = substream;
@@ -202,8 +204,10 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
 
 	ret = snd_pcm_hw_constraint_integer(substream->runtime,
 			SNDRV_PCM_HW_PARAM_PERIODS);
-	if (ret < 0)
+	if (ret < 0) {
+		kfree(iprtd);
 		return ret;
+	}
 
 	snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
 	return 0;
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index 4fd13d0791b..a11daa1e905 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -83,8 +83,6 @@ static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
 /*
  * SSI DAI format configuration.
  * Should only be called when port is inactive (i.e. SSIEN = 0).
- * Note: We don't use the I2S modes but instead manually configure the
- * SSI for I2S because the I2S mode is only a register preset.
  */
 static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 {
@@ -99,6 +97,10 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 		/* data on rising edge of bclk, frame low 1clk before data */
 		strcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
 		scr |= SSI_SCR_NET;
+		if (ssi->flags & IMX_SSI_USE_I2S_SLAVE) {
+			scr &= ~SSI_I2S_MODE_MASK;
+			scr |= SSI_SCR_I2S_MODE_SLAVE;
+		}
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
 		/* data on rising edge of bclk, frame high with data */
@@ -143,6 +145,11 @@ static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
 
 	strcr |= SSI_STCR_TFEN0;
 
+	if (ssi->flags & IMX_SSI_NET)
+		scr |= SSI_SCR_NET;
+	if (ssi->flags & IMX_SSI_SYN)
+		scr |= SSI_SCR_SYN;
+
 	writel(strcr, ssi->base + SSI_STCR);
 	writel(strcr, ssi->base + SSI_SRCR);
 	writel(scr, ssi->base + SSI_SCR);
diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig
new file mode 100644
index 00000000000..5351cba66c9
--- /dev/null
+++ b/sound/soc/jz4740/Kconfig
@@ -0,0 +1,23 @@
+config SND_JZ4740_SOC
+	tristate "SoC Audio for Ingenic JZ4740 SoC"
+	depends on MACH_JZ4740 && SND_SOC
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the JZ4740 I2S interface. You will also need to select the audio
+	  interfaces to support below.
+
+config SND_JZ4740_SOC_I2S
+	depends on SND_JZ4740_SOC
+	tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC"
+	help
+	  Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740
+	  based boards.
+
+config SND_JZ4740_SOC_QI_LB60
+	tristate "SoC Audio support for Qi LB60"
+	depends on SND_JZ4740_SOC && JZ4740_QI_LB60
+	select SND_JZ4740_SOC_I2S
+    select SND_SOC_JZ4740_CODEC
+	help
+	  Say Y if you want to add support for ASoC audio on the Qi LB60 board
+	  a.k.a Qi Ben NanoNote.
diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile
new file mode 100644
index 00000000000..be873c1b0c2
--- /dev/null
+++ b/sound/soc/jz4740/Makefile
@@ -0,0 +1,13 @@
+#
+# Jz4740 Platform Support
+#
+snd-soc-jz4740-objs := jz4740-pcm.o
+snd-soc-jz4740-i2s-objs := jz4740-i2s.o
+
+obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o
+obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
+
+# Jz4740 Machine Support
+snd-soc-qi-lb60-objs := qi_lb60.o
+
+obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o
diff --git a/sound/soc/jz4740/jz4740-i2s.c b/sound/soc/jz4740/jz4740-i2s.c
new file mode 100644
index 00000000000..eb518f0c5e0
--- /dev/null
+++ b/sound/soc/jz4740/jz4740-i2s.c
@@ -0,0 +1,540 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "jz4740-i2s.h"
+#include "jz4740-pcm.h"
+
+#define JZ_REG_AIC_CONF		0x00
+#define JZ_REG_AIC_CTRL		0x04
+#define JZ_REG_AIC_I2S_FMT	0x10
+#define JZ_REG_AIC_FIFO_STATUS	0x14
+#define JZ_REG_AIC_I2S_STATUS	0x1c
+#define JZ_REG_AIC_CLK_DIV	0x30
+#define JZ_REG_AIC_FIFO		0x34
+
+#define JZ_AIC_CONF_FIFO_RX_THRESHOLD_MASK (0xf << 12)
+#define JZ_AIC_CONF_FIFO_TX_THRESHOLD_MASK (0xf <<  8)
+#define JZ_AIC_CONF_OVERFLOW_PLAY_LAST BIT(6)
+#define JZ_AIC_CONF_INTERNAL_CODEC BIT(5)
+#define JZ_AIC_CONF_I2S BIT(4)
+#define JZ_AIC_CONF_RESET BIT(3)
+#define JZ_AIC_CONF_BIT_CLK_MASTER BIT(2)
+#define JZ_AIC_CONF_SYNC_CLK_MASTER BIT(1)
+#define JZ_AIC_CONF_ENABLE BIT(0)
+
+#define JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET 12
+#define JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET 8
+
+#define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_MASK (0x7 << 19)
+#define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK (0x7 << 16)
+#define JZ_AIC_CTRL_ENABLE_RX_DMA BIT(15)
+#define JZ_AIC_CTRL_ENABLE_TX_DMA BIT(14)
+#define JZ_AIC_CTRL_MONO_TO_STEREO BIT(11)
+#define JZ_AIC_CTRL_SWITCH_ENDIANNESS BIT(10)
+#define JZ_AIC_CTRL_SIGNED_TO_UNSIGNED BIT(9)
+#define JZ_AIC_CTRL_FLUSH		BIT(8)
+#define JZ_AIC_CTRL_ENABLE_ROR_INT BIT(6)
+#define JZ_AIC_CTRL_ENABLE_TUR_INT BIT(5)
+#define JZ_AIC_CTRL_ENABLE_RFS_INT BIT(4)
+#define JZ_AIC_CTRL_ENABLE_TFS_INT BIT(3)
+#define JZ_AIC_CTRL_ENABLE_LOOPBACK BIT(2)
+#define JZ_AIC_CTRL_ENABLE_PLAYBACK BIT(1)
+#define JZ_AIC_CTRL_ENABLE_CAPTURE BIT(0)
+
+#define JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_OFFSET 19
+#define JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET  16
+
+#define JZ_AIC_I2S_FMT_DISABLE_BIT_CLK BIT(12)
+#define JZ_AIC_I2S_FMT_ENABLE_SYS_CLK BIT(4)
+#define JZ_AIC_I2S_FMT_MSB BIT(0)
+
+#define JZ_AIC_I2S_STATUS_BUSY BIT(2)
+
+#define JZ_AIC_CLK_DIV_MASK 0xf
+
+struct jz4740_i2s {
+	struct resource *mem;
+	void __iomem *base;
+	dma_addr_t phys_base;
+
+	struct clk *clk_aic;
+	struct clk *clk_i2s;
+
+	struct jz4740_pcm_config pcm_config_playback;
+	struct jz4740_pcm_config pcm_config_capture;
+};
+
+static inline uint32_t jz4740_i2s_read(const struct jz4740_i2s *i2s,
+	unsigned int reg)
+{
+	return readl(i2s->base + reg);
+}
+
+static inline void jz4740_i2s_write(const struct jz4740_i2s *i2s,
+	unsigned int reg, uint32_t value)
+{
+	writel(value, i2s->base + reg);
+}
+
+static inline struct jz4740_i2s *jz4740_dai_to_i2s(struct snd_soc_dai *dai)
+{
+	return dai->private_data;
+}
+
+static int jz4740_i2s_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	uint32_t conf, ctrl;
+
+	if (dai->active)
+		return 0;
+
+	ctrl = jz4740_i2s_read(i2s, JZ_REG_AIC_CTRL);
+	ctrl |= JZ_AIC_CTRL_FLUSH;
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
+
+	clk_enable(i2s->clk_i2s);
+
+	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
+	conf |= JZ_AIC_CONF_ENABLE;
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+
+	return 0;
+}
+
+static void jz4740_i2s_shutdown(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	uint32_t conf;
+
+	if (!dai->active)
+		return;
+
+	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
+	conf &= ~JZ_AIC_CONF_ENABLE;
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+
+	clk_disable(i2s->clk_i2s);
+}
+
+static int jz4740_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+	struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+
+	uint32_t ctrl;
+	uint32_t mask;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		mask = JZ_AIC_CTRL_ENABLE_PLAYBACK | JZ_AIC_CTRL_ENABLE_TX_DMA;
+	else
+		mask = JZ_AIC_CTRL_ENABLE_CAPTURE | JZ_AIC_CTRL_ENABLE_RX_DMA;
+
+	ctrl = jz4740_i2s_read(i2s, JZ_REG_AIC_CTRL);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ctrl |= mask;
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		ctrl &= ~mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
+
+	return 0;
+}
+
+static int jz4740_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+
+	uint32_t format = 0;
+	uint32_t conf;
+
+	conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
+
+	conf &= ~(JZ_AIC_CONF_BIT_CLK_MASTER | JZ_AIC_CONF_SYNC_CLK_MASTER);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		conf |= JZ_AIC_CONF_BIT_CLK_MASTER | JZ_AIC_CONF_SYNC_CLK_MASTER;
+		format |= JZ_AIC_I2S_FMT_ENABLE_SYS_CLK;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		conf |= JZ_AIC_CONF_SYNC_CLK_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		conf |= JZ_AIC_CONF_BIT_CLK_MASTER;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_MSB:
+		format |= JZ_AIC_I2S_FMT_MSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+	jz4740_i2s_write(i2s, JZ_REG_AIC_I2S_FMT, format);
+
+	return 0;
+}
+
+static int jz4740_i2s_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	enum jz4740_dma_width dma_width;
+	struct jz4740_pcm_config *pcm_config;
+	unsigned int sample_size;
+	uint32_t ctrl;
+
+	ctrl = jz4740_i2s_read(i2s, JZ_REG_AIC_CTRL);
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		sample_size = 0;
+		dma_width = JZ4740_DMA_WIDTH_8BIT;
+		break;
+	case SNDRV_PCM_FORMAT_S16:
+		sample_size = 1;
+		dma_width = JZ4740_DMA_WIDTH_16BIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		ctrl &= ~JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_MASK;
+		ctrl |= sample_size << JZ_AIC_CTRL_OUTPUT_SAMPLE_SIZE_OFFSET;
+		if (params_channels(params) == 1)
+			ctrl |= JZ_AIC_CTRL_MONO_TO_STEREO;
+		else
+			ctrl &= ~JZ_AIC_CTRL_MONO_TO_STEREO;
+
+		pcm_config = &i2s->pcm_config_playback;
+		pcm_config->dma_config.dst_width = dma_width;
+
+	} else {
+		ctrl &= ~JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_MASK;
+		ctrl |= sample_size << JZ_AIC_CTRL_INPUT_SAMPLE_SIZE_OFFSET;
+
+		pcm_config = &i2s->pcm_config_capture;
+		pcm_config->dma_config.src_width = dma_width;
+	}
+
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CTRL, ctrl);
+
+	snd_soc_dai_set_dma_data(dai, substream, pcm_config);
+
+	return 0;
+}
+
+static int jz4740_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+	unsigned int freq, int dir)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	struct clk *parent;
+	int ret = 0;
+
+	switch (clk_id) {
+	case JZ4740_I2S_CLKSRC_EXT:
+		parent = clk_get(NULL, "ext");
+		clk_set_parent(i2s->clk_i2s, parent);
+		break;
+	case JZ4740_I2S_CLKSRC_PLL:
+		parent = clk_get(NULL, "pll half");
+		clk_set_parent(i2s->clk_i2s, parent);
+		ret = clk_set_rate(i2s->clk_i2s, freq);
+		break;
+	default:
+		return -EINVAL;
+	}
+	clk_put(parent);
+
+	return ret;
+}
+
+static int jz4740_i2s_suspend(struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	uint32_t conf;
+
+	if (dai->active) {
+		conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
+		conf &= ~JZ_AIC_CONF_ENABLE;
+		jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+
+		clk_disable(i2s->clk_i2s);
+	}
+
+	clk_disable(i2s->clk_aic);
+
+	return 0;
+}
+
+static int jz4740_i2s_resume(struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	uint32_t conf;
+
+	clk_enable(i2s->clk_aic);
+
+	if (dai->active) {
+		clk_enable(i2s->clk_i2s);
+
+		conf = jz4740_i2s_read(i2s, JZ_REG_AIC_CONF);
+		conf |= JZ_AIC_CONF_ENABLE;
+		jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+	}
+
+	return 0;
+}
+
+static int jz4740_i2s_probe(struct platform_device *pdev, struct snd_soc_dai *dai)
+{
+	struct jz4740_i2s *i2s = jz4740_dai_to_i2s(dai);
+	uint32_t conf;
+
+	conf = (7 << JZ_AIC_CONF_FIFO_RX_THRESHOLD_OFFSET) |
+		(8 << JZ_AIC_CONF_FIFO_TX_THRESHOLD_OFFSET) |
+		JZ_AIC_CONF_OVERFLOW_PLAY_LAST |
+		JZ_AIC_CONF_I2S |
+		JZ_AIC_CONF_INTERNAL_CODEC;
+
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, JZ_AIC_CONF_RESET);
+	jz4740_i2s_write(i2s, JZ_REG_AIC_CONF, conf);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops jz4740_i2s_dai_ops = {
+	.startup = jz4740_i2s_startup,
+	.shutdown = jz4740_i2s_shutdown,
+	.trigger = jz4740_i2s_trigger,
+	.hw_params = jz4740_i2s_hw_params,
+	.set_fmt = jz4740_i2s_set_fmt,
+	.set_sysclk = jz4740_i2s_set_sysclk,
+};
+
+#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \
+		SNDRV_PCM_FMTBIT_S16_LE)
+
+struct snd_soc_dai jz4740_i2s_dai = {
+	.name = "jz4740-i2s",
+	.probe = jz4740_i2s_probe,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = JZ4740_I2S_FMTS,
+	},
+	.capture = {
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_48000,
+		.formats = JZ4740_I2S_FMTS,
+	},
+	.symmetric_rates = 1,
+	.ops = &jz4740_i2s_dai_ops,
+	.suspend = jz4740_i2s_suspend,
+	.resume = jz4740_i2s_resume,
+};
+EXPORT_SYMBOL_GPL(jz4740_i2s_dai);
+
+static void __devinit jz4740_i2c_init_pcm_config(struct jz4740_i2s *i2s)
+{
+	struct jz4740_dma_config *dma_config;
+
+	/* Playback */
+	dma_config = &i2s->pcm_config_playback.dma_config;
+	dma_config->src_width = JZ4740_DMA_WIDTH_32BIT,
+	dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+	dma_config->request_type = JZ4740_DMA_TYPE_AIC_TRANSMIT;
+	dma_config->flags = JZ4740_DMA_SRC_AUTOINC;
+	dma_config->mode = JZ4740_DMA_MODE_SINGLE;
+	i2s->pcm_config_playback.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
+
+	/* Capture */
+	dma_config = &i2s->pcm_config_capture.dma_config;
+	dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT,
+	dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
+	dma_config->request_type = JZ4740_DMA_TYPE_AIC_RECEIVE;
+	dma_config->flags = JZ4740_DMA_DST_AUTOINC;
+	dma_config->mode = JZ4740_DMA_MODE_SINGLE;
+	i2s->pcm_config_capture.fifo_addr = i2s->phys_base + JZ_REG_AIC_FIFO;
+}
+
+static int __devinit jz4740_i2s_dev_probe(struct platform_device *pdev)
+{
+	struct jz4740_i2s *i2s;
+	int ret;
+
+	i2s = kzalloc(sizeof(*i2s), GFP_KERNEL);
+
+	if (!i2s)
+		return -ENOMEM;
+
+	i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!i2s->mem) {
+		ret = -ENOENT;
+		goto err_free;
+	}
+
+	i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem),
+				pdev->name);
+	if (!i2s->mem) {
+		ret = -EBUSY;
+		goto err_free;
+	}
+
+	i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem));
+	if (!i2s->base) {
+		ret = -EBUSY;
+		goto err_release_mem_region;
+	}
+
+	i2s->phys_base = i2s->mem->start;
+
+	i2s->clk_aic = clk_get(&pdev->dev, "aic");
+	if (IS_ERR(i2s->clk_aic)) {
+		ret = PTR_ERR(i2s->clk_aic);
+		goto err_iounmap;
+	}
+
+	i2s->clk_i2s = clk_get(&pdev->dev, "i2s");
+	if (IS_ERR(i2s->clk_i2s)) {
+		ret = PTR_ERR(i2s->clk_i2s);
+		goto err_clk_put_aic;
+	}
+
+	clk_enable(i2s->clk_aic);
+
+	jz4740_i2c_init_pcm_config(i2s);
+
+	jz4740_i2s_dai.private_data = i2s;
+	ret = snd_soc_register_dai(&jz4740_i2s_dai);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register DAI\n");
+		goto err_clk_put_i2s;
+	}
+
+	platform_set_drvdata(pdev, i2s);
+
+	return 0;
+
+err_clk_put_i2s:
+	clk_disable(i2s->clk_aic);
+	clk_put(i2s->clk_i2s);
+err_clk_put_aic:
+	clk_put(i2s->clk_aic);
+err_iounmap:
+	iounmap(i2s->base);
+err_release_mem_region:
+	release_mem_region(i2s->mem->start, resource_size(i2s->mem));
+err_free:
+	kfree(i2s);
+
+	return ret;
+}
+
+static int __devexit jz4740_i2s_dev_remove(struct platform_device *pdev)
+{
+	struct jz4740_i2s *i2s = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_dai(&jz4740_i2s_dai);
+
+	clk_disable(i2s->clk_aic);
+	clk_put(i2s->clk_i2s);
+	clk_put(i2s->clk_aic);
+
+	iounmap(i2s->base);
+	release_mem_region(i2s->mem->start, resource_size(i2s->mem));
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(i2s);
+
+	return 0;
+}
+
+static struct platform_driver jz4740_i2s_driver = {
+	.probe = jz4740_i2s_dev_probe,
+	.remove = __devexit_p(jz4740_i2s_dev_remove),
+	.driver = {
+		.name = "jz4740-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_i2s_init(void)
+{
+	return platform_driver_register(&jz4740_i2s_driver);
+}
+module_init(jz4740_i2s_init);
+
+static void __exit jz4740_i2s_exit(void)
+{
+	platform_driver_unregister(&jz4740_i2s_driver);
+}
+module_exit(jz4740_i2s_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:jz4740-i2s");
diff --git a/sound/soc/jz4740/jz4740-i2s.h b/sound/soc/jz4740/jz4740-i2s.h
new file mode 100644
index 00000000000..da22ed88a58
--- /dev/null
+++ b/sound/soc/jz4740/jz4740-i2s.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _JZ4740_I2S_H
+#define _JZ4740_I2S_H
+
+/* I2S clock source */
+#define JZ4740_I2S_CLKSRC_EXT 0
+#define JZ4740_I2S_CLKSRC_PLL 1
+
+#define JZ4740_I2S_BIT_CLK		0
+
+extern struct snd_soc_dai jz4740_i2s_dai;
+
+#endif
diff --git a/sound/soc/jz4740/jz4740-pcm.c b/sound/soc/jz4740/jz4740-pcm.c
new file mode 100644
index 00000000000..ee68d850c8d
--- /dev/null
+++ b/sound/soc/jz4740/jz4740-pcm.c
@@ -0,0 +1,373 @@
+/*
+ *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/mach-jz4740/dma.h>
+#include "jz4740-pcm.h"
+
+struct jz4740_runtime_data {
+	unsigned long dma_period;
+	dma_addr_t dma_start;
+	dma_addr_t dma_pos;
+	dma_addr_t dma_end;
+
+	struct jz4740_dma_chan *dma;
+
+	dma_addr_t fifo_addr;
+};
+
+/* identify hardware playback capabilities */
+static const struct snd_pcm_hardware jz4740_pcm_hardware = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
+
+	.rates			= SNDRV_PCM_RATE_8000_48000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.period_bytes_min	= 16,
+	.period_bytes_max	= 2 * PAGE_SIZE,
+	.periods_min		= 2,
+	.periods_max		= 128,
+	.buffer_bytes_max	= 128 * 2 * PAGE_SIZE,
+	.fifo_size		= 32,
+};
+
+static void jz4740_pcm_start_transfer(struct jz4740_runtime_data *prtd,
+	struct snd_pcm_substream *substream)
+{
+	unsigned long count;
+
+	if (prtd->dma_pos == prtd->dma_end)
+		prtd->dma_pos = prtd->dma_start;
+
+	if (prtd->dma_pos + prtd->dma_period > prtd->dma_end)
+		count = prtd->dma_end - prtd->dma_pos;
+	else
+		count = prtd->dma_period;
+
+	jz4740_dma_disable(prtd->dma);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		jz4740_dma_set_src_addr(prtd->dma, prtd->dma_pos);
+		jz4740_dma_set_dst_addr(prtd->dma, prtd->fifo_addr);
+	} else {
+		jz4740_dma_set_src_addr(prtd->dma, prtd->fifo_addr);
+		jz4740_dma_set_dst_addr(prtd->dma, prtd->dma_pos);
+	}
+
+	jz4740_dma_set_transfer_count(prtd->dma, count);
+
+	prtd->dma_pos += count;
+
+	jz4740_dma_enable(prtd->dma);
+}
+
+static void jz4740_pcm_dma_transfer_done(struct jz4740_dma_chan *dma, int err,
+	void *dev_id)
+{
+	struct snd_pcm_substream *substream = dev_id;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd = runtime->private_data;
+
+	snd_pcm_period_elapsed(substream);
+
+	jz4740_pcm_start_transfer(prtd, substream);
+}
+
+static int jz4740_pcm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct jz4740_pcm_config *config;
+
+	config = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
+
+	if (!config)
+		return 0;
+
+	if (!prtd->dma) {
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			prtd->dma = jz4740_dma_request(substream, "PCM Capture");
+		else
+			prtd->dma = jz4740_dma_request(substream, "PCM Playback");
+	}
+
+	if (!prtd->dma)
+		return -EBUSY;
+
+	jz4740_dma_configure(prtd->dma, &config->dma_config);
+	prtd->fifo_addr = config->fifo_addr;
+
+	jz4740_dma_set_complete_cb(prtd->dma, jz4740_pcm_dma_transfer_done);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	prtd->dma_period = params_period_bytes(params);
+	prtd->dma_start = runtime->dma_addr;
+	prtd->dma_pos = prtd->dma_start;
+	prtd->dma_end = prtd->dma_start + runtime->dma_bytes;
+
+	return 0;
+}
+
+static int jz4740_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	struct jz4740_runtime_data *prtd = substream->runtime->private_data;
+
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	if (prtd->dma) {
+		jz4740_dma_free(prtd->dma);
+		prtd->dma = NULL;
+	}
+
+	return 0;
+}
+
+static int jz4740_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct jz4740_runtime_data *prtd = substream->runtime->private_data;
+
+	if (!prtd->dma)
+		return -EBUSY;
+
+	prtd->dma_pos = prtd->dma_start;
+
+	return 0;
+}
+
+static int jz4740_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd = runtime->private_data;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		jz4740_pcm_start_transfer(prtd, substream);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		jz4740_dma_disable(prtd->dma);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t jz4740_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd = runtime->private_data;
+	unsigned long byte_offset;
+	snd_pcm_uframes_t offset;
+	struct jz4740_dma_chan *dma = prtd->dma;
+
+	/* prtd->dma_pos points to the end of the current transfer. So by
+	 * subtracting prdt->dma_start we get the offset to the end of the
+	 * current period in bytes. By subtracting the residue of the transfer
+	 * we get the current offset in bytes. */
+	byte_offset = prtd->dma_pos - prtd->dma_start;
+	byte_offset -= jz4740_dma_get_residue(dma);
+
+	offset = bytes_to_frames(runtime, byte_offset);
+	if (offset >= runtime->buffer_size)
+		offset = 0;
+
+	return offset;
+}
+
+static int jz4740_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd;
+
+	prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	snd_soc_set_runtime_hwparams(substream, &jz4740_pcm_hardware);
+
+	runtime->private_data = prtd;
+
+	return 0;
+}
+
+static int jz4740_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct jz4740_runtime_data *prtd = runtime->private_data;
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int jz4740_pcm_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	return remap_pfn_range(vma, vma->vm_start,
+			substream->dma_buffer.addr >> PAGE_SHIFT,
+			vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+static struct snd_pcm_ops jz4740_pcm_ops = {
+	.open		= jz4740_pcm_open,
+	.close		= jz4740_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= jz4740_pcm_hw_params,
+	.hw_free	= jz4740_pcm_hw_free,
+	.prepare	= jz4740_pcm_prepare,
+	.trigger	= jz4740_pcm_trigger,
+	.pointer	= jz4740_pcm_pointer,
+	.mmap		= jz4740_pcm_mmap,
+};
+
+static int jz4740_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = jz4740_pcm_hardware.buffer_bytes_max;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+
+	buf->area = dma_alloc_noncoherent(pcm->card->dev, size,
+					  &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+
+	buf->bytes = size;
+
+	return 0;
+}
+
+static void jz4740_pcm_free(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < SNDRV_PCM_STREAM_LAST; ++stream) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_noncoherent(pcm->card->dev, buf->bytes, buf->area,
+				buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 jz4740_pcm_dmamask = DMA_BIT_MASK(32);
+
+int jz4740_pcm_new(struct snd_card *card, struct snd_soc_dai *dai,
+	struct snd_pcm *pcm)
+{
+	int ret = 0;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &jz4740_pcm_dmamask;
+
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	if (dai->playback.channels_min) {
+		ret = jz4740_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto err;
+	}
+
+	if (dai->capture.channels_min) {
+		ret = jz4740_pcm_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto err;
+	}
+
+err:
+	return ret;
+}
+
+struct snd_soc_platform jz4740_soc_platform = {
+		.name		= "jz4740-pcm",
+		.pcm_ops	= &jz4740_pcm_ops,
+		.pcm_new	= jz4740_pcm_new,
+		.pcm_free	= jz4740_pcm_free,
+};
+EXPORT_SYMBOL_GPL(jz4740_soc_platform);
+
+static int __devinit jz4740_pcm_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_platform(&jz4740_soc_platform);
+}
+
+static int __devexit jz4740_pcm_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_platform(&jz4740_soc_platform);
+	return 0;
+}
+
+static struct platform_driver jz4740_pcm_driver = {
+	.probe = jz4740_pcm_probe,
+	.remove = __devexit_p(jz4740_pcm_remove),
+	.driver = {
+		.name = "jz4740-pcm",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init jz4740_soc_platform_init(void)
+{
+	return platform_driver_register(&jz4740_pcm_driver);
+}
+module_init(jz4740_soc_platform_init);
+
+static void __exit jz4740_soc_platform_exit(void)
+{
+	return platform_driver_unregister(&jz4740_pcm_driver);
+}
+module_exit(jz4740_soc_platform_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Ingenic SoC JZ4740 PCM driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/jz4740/jz4740-pcm.h b/sound/soc/jz4740/jz4740-pcm.h
new file mode 100644
index 00000000000..e3f221e2779
--- /dev/null
+++ b/sound/soc/jz4740/jz4740-pcm.h
@@ -0,0 +1,22 @@
+/*
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _JZ4740_PCM_H
+#define _JZ4740_PCM_H
+
+#include <linux/dma-mapping.h>
+#include <asm/mach-jz4740/dma.h>
+
+/* platform data */
+extern struct snd_soc_platform jz4740_soc_platform;
+
+struct jz4740_pcm_config {
+	struct jz4740_dma_config dma_config;
+	phys_addr_t fifo_addr;
+};
+
+#endif
diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c
new file mode 100644
index 00000000000..f15f4918f15
--- /dev/null
+++ b/sound/soc/jz4740/qi_lb60.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <linux/gpio.h>
+
+#include "../codecs/jz4740.h"
+#include "jz4740-pcm.h"
+#include "jz4740-i2s.h"
+
+
+#define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29)
+#define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4)
+
+static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget,
+			     struct snd_kcontrol *ctrl, int event)
+{
+	int on = 0;
+	if (event & SND_SOC_DAPM_POST_PMU)
+		on = 1;
+	else if (event & SND_SOC_DAPM_PRE_PMD)
+		on = 0;
+
+	gpio_set_value(QI_LB60_SND_GPIO, on);
+	gpio_set_value(QI_LB60_AMP_GPIO, on);
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget qi_lb60_widgets[] = {
+	SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event),
+	SND_SOC_DAPM_MIC("Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route qi_lb60_routes[] = {
+	{"Mic", NULL, "MIC"},
+	{"Speaker", NULL, "LOUT"},
+	{"Speaker", NULL, "ROUT"},
+};
+
+#define QI_LB60_DAIFMT (SND_SOC_DAIFMT_I2S | \
+			SND_SOC_DAIFMT_NB_NF | \
+			SND_SOC_DAIFMT_CBM_CFM)
+
+static int qi_lb60_codec_init(struct snd_soc_codec *codec)
+{
+	int ret;
+	struct snd_soc_dai *cpu_dai = codec->socdev->card->dai_link->cpu_dai;
+
+	snd_soc_dapm_nc_pin(codec, "LIN");
+	snd_soc_dapm_nc_pin(codec, "RIN");
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, QI_LB60_DAIFMT);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret);
+		return ret;
+	}
+
+	snd_soc_dapm_new_controls(codec, qi_lb60_widgets, ARRAY_SIZE(qi_lb60_widgets));
+	snd_soc_dapm_add_routes(codec, qi_lb60_routes, ARRAY_SIZE(qi_lb60_routes));
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link qi_lb60_dai = {
+	.name = "jz4740",
+	.stream_name = "jz4740",
+	.cpu_dai = &jz4740_i2s_dai,
+	.codec_dai = &jz4740_codec_dai,
+	.init = qi_lb60_codec_init,
+};
+
+static struct snd_soc_card qi_lb60 = {
+	.name = "QI LB60",
+	.dai_link = &qi_lb60_dai,
+	.num_links = 1,
+	.platform = &jz4740_soc_platform,
+};
+
+static struct snd_soc_device qi_lb60_snd_devdata = {
+	.card = &qi_lb60,
+	.codec_dev = &soc_codec_dev_jz4740_codec,
+};
+
+static struct platform_device *qi_lb60_snd_device;
+
+static int __init qi_lb60_init(void)
+{
+	int ret;
+
+	qi_lb60_snd_device = platform_device_alloc("soc-audio", -1);
+
+	if (!qi_lb60_snd_device)
+		return -ENOMEM;
+
+	ret = gpio_request(QI_LB60_SND_GPIO, "SND");
+	if (ret) {
+		pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n",
+				QI_LB60_SND_GPIO, ret);
+		goto err_device_put;
+	}
+
+	ret = gpio_request(QI_LB60_AMP_GPIO, "AMP");
+	if (ret) {
+		pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n",
+				QI_LB60_AMP_GPIO, ret);
+		goto err_gpio_free_snd;
+	}
+
+	gpio_direction_output(QI_LB60_SND_GPIO, 0);
+	gpio_direction_output(QI_LB60_AMP_GPIO, 0);
+
+	platform_set_drvdata(qi_lb60_snd_device, &qi_lb60_snd_devdata);
+	qi_lb60_snd_devdata.dev = &qi_lb60_snd_device->dev;
+
+	ret = platform_device_add(qi_lb60_snd_device);
+	if (ret) {
+		pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret);
+		goto err_unset_pdata;
+	}
+
+	 return 0;
+
+err_unset_pdata:
+	platform_set_drvdata(qi_lb60_snd_device, NULL);
+/*err_gpio_free_amp:*/
+	gpio_free(QI_LB60_AMP_GPIO);
+err_gpio_free_snd:
+	gpio_free(QI_LB60_SND_GPIO);
+err_device_put:
+	platform_device_put(qi_lb60_snd_device);
+
+	return ret;
+}
+module_init(qi_lb60_init);
+
+static void __exit qi_lb60_exit(void)
+{
+	gpio_free(QI_LB60_AMP_GPIO);
+	gpio_free(QI_LB60_SND_GPIO);
+	platform_device_unregister(qi_lb60_snd_device);
+}
+module_exit(qi_lb60_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig
new file mode 100644
index 00000000000..16ec2a2dba4
--- /dev/null
+++ b/sound/soc/kirkwood/Kconfig
@@ -0,0 +1,20 @@
+config SND_KIRKWOOD_SOC
+	tristate "SoC Audio for the Marvell Kirkwood chip"
+	depends on ARCH_KIRKWOOD
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Kirkwood I2S interface. You will also need to select the
+	  audio interfaces to support below.
+
+config SND_KIRKWOOD_SOC_I2S
+	tristate
+
+config SND_KIRKWOOD_SOC_OPENRD
+	tristate "SoC Audio support for Kirkwood Openrd Client"
+	depends on SND_KIRKWOOD_SOC && MACH_OPENRD_CLIENT
+	select SND_KIRKWOOD_SOC_I2S
+	select SND_SOC_CS42L51
+	help
+	  Say Y if you want to add support for SoC audio on
+	  Openrd Client.
+
diff --git a/sound/soc/kirkwood/Makefile b/sound/soc/kirkwood/Makefile
new file mode 100644
index 00000000000..33a16dcab5b
--- /dev/null
+++ b/sound/soc/kirkwood/Makefile
@@ -0,0 +1,9 @@
+snd-soc-kirkwood-objs := kirkwood-dma.o
+snd-soc-kirkwood-i2s-objs := kirkwood-i2s.o
+
+obj-$(CONFIG_SND_KIRKWOOD_SOC) += snd-soc-kirkwood.o
+obj-$(CONFIG_SND_KIRKWOOD_SOC_I2S) += snd-soc-kirkwood-i2s.o
+
+snd-soc-openrd-objs := kirkwood-openrd.o
+
+obj-$(CONFIG_SND_KIRKWOOD_SOC_OPENRD) += snd-soc-openrd.o
diff --git a/sound/soc/kirkwood/kirkwood-dma.c b/sound/soc/kirkwood/kirkwood-dma.c
new file mode 100644
index 00000000000..a30205be3e2
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood-dma.c
@@ -0,0 +1,383 @@
+/*
+ * kirkwood-dma.c
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/mbus.h>
+#include <sound/soc.h>
+#include "kirkwood-dma.h"
+#include "kirkwood.h"
+
+#define KIRKWOOD_RATES \
+	(SNDRV_PCM_RATE_44100 | \
+	 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000)
+#define KIRKWOOD_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE | \
+	 SNDRV_PCM_FMTBIT_S32_LE)
+
+struct kirkwood_dma_priv {
+	struct snd_pcm_substream *play_stream;
+	struct snd_pcm_substream *rec_stream;
+	struct kirkwood_dma_data *data;
+};
+
+static struct snd_pcm_hardware kirkwood_dma_snd_hw = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED |
+		 SNDRV_PCM_INFO_MMAP |
+		 SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_PAUSE),
+	.formats		= KIRKWOOD_FORMATS,
+	.rates			= KIRKWOOD_RATES,
+	.rate_min		= 44100,
+	.rate_max		= 96000,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= KIRKWOOD_SND_MAX_PERIOD_BYTES * KIRKWOOD_SND_MAX_PERIODS,
+	.period_bytes_min	= KIRKWOOD_SND_MIN_PERIOD_BYTES,
+	.period_bytes_max	= KIRKWOOD_SND_MAX_PERIOD_BYTES,
+	.periods_min		= KIRKWOOD_SND_MIN_PERIODS,
+	.periods_max		= KIRKWOOD_SND_MAX_PERIODS,
+	.fifo_size		= 0,
+};
+
+static u64 kirkwood_dma_dmamask = 0xFFFFFFFFUL;
+
+static irqreturn_t kirkwood_dma_irq(int irq, void *dev_id)
+{
+	struct kirkwood_dma_priv *prdata = dev_id;
+	struct kirkwood_dma_data *priv = prdata->data;
+	unsigned long mask, status, cause;
+
+	mask = readl(priv->io + KIRKWOOD_INT_MASK);
+	status = readl(priv->io + KIRKWOOD_INT_CAUSE) & mask;
+
+	cause = readl(priv->io + KIRKWOOD_ERR_CAUSE);
+	if (unlikely(cause)) {
+		printk(KERN_WARNING "%s: got err interrupt 0x%lx\n",
+				__func__, cause);
+		writel(cause, priv->io + KIRKWOOD_ERR_CAUSE);
+		return IRQ_HANDLED;
+	}
+
+	/* we've enabled only bytes interrupts ... */
+	if (status & ~(KIRKWOOD_INT_CAUSE_PLAY_BYTES | \
+			KIRKWOOD_INT_CAUSE_REC_BYTES)) {
+		printk(KERN_WARNING "%s: unexpected interrupt %lx\n",
+			__func__, status);
+		return IRQ_NONE;
+	}
+
+	/* ack int */
+	writel(status, priv->io + KIRKWOOD_INT_CAUSE);
+
+	if (status & KIRKWOOD_INT_CAUSE_PLAY_BYTES)
+		snd_pcm_period_elapsed(prdata->play_stream);
+
+	if (status & KIRKWOOD_INT_CAUSE_REC_BYTES)
+		snd_pcm_period_elapsed(prdata->rec_stream);
+
+	return IRQ_HANDLED;
+}
+
+static void kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
+					unsigned long dma,
+					struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	/* First disable and clear windows */
+	writel(0, base + KIRKWOOD_AUDIO_WIN_CTRL_REG(win));
+	writel(0, base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
+
+	/* try to find matching cs for current dma address */
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+		if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
+			writel(cs->base & 0xffff0000,
+				base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
+			writel(((cs->size - 1) & 0xffff0000) |
+				(cs->mbus_attr << 8) |
+				(dram->mbus_dram_target_id << 4) | 1,
+				base + KIRKWOOD_AUDIO_WIN_CTRL_REG(win));
+		}
+	}
+}
+
+static int kirkwood_dma_open(struct snd_pcm_substream *substream)
+{
+	int err;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct snd_soc_dai *cpu_dai = soc_runtime->dai->cpu_dai;
+	struct kirkwood_dma_data *priv;
+	struct kirkwood_dma_priv *prdata = cpu_dai->private_data;
+	unsigned long addr;
+
+	priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
+	snd_soc_set_runtime_hwparams(substream, &kirkwood_dma_snd_hw);
+
+	/* Ensure that all constraints linked to dma burst are fullfilled */
+	err = snd_pcm_hw_constraint_minmax(runtime,
+			SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+			priv->burst * 2,
+			KIRKWOOD_AUDIO_BUF_MAX-1);
+	if (err < 0)
+		return err;
+
+	err = snd_pcm_hw_constraint_step(runtime, 0,
+			SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+			priv->burst);
+	if (err < 0)
+		return err;
+
+	err = snd_pcm_hw_constraint_step(substream->runtime, 0,
+			 SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+			 priv->burst);
+	if (err < 0)
+		return err;
+
+	if (soc_runtime->dai->cpu_dai->private_data == NULL) {
+		prdata = kzalloc(sizeof(struct kirkwood_dma_priv), GFP_KERNEL);
+		if (prdata == NULL)
+			return -ENOMEM;
+
+		prdata->data = priv;
+
+		err = request_irq(priv->irq, kirkwood_dma_irq, IRQF_SHARED,
+				  "kirkwood-i2s", prdata);
+		if (err) {
+			kfree(prdata);
+			return -EBUSY;
+		}
+
+		soc_runtime->dai->cpu_dai->private_data = prdata;
+
+		/*
+		 * Enable Error interrupts. We're only ack'ing them but
+		 * it's usefull for diagnostics
+		 */
+		writel((unsigned long)-1, priv->io + KIRKWOOD_ERR_MASK);
+	}
+
+	addr = virt_to_phys(substream->dma_buffer.area);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		prdata->play_stream = substream;
+		kirkwood_dma_conf_mbus_windows(priv->io,
+			KIRKWOOD_PLAYBACK_WIN, addr, priv->dram);
+	} else {
+		prdata->rec_stream = substream;
+		kirkwood_dma_conf_mbus_windows(priv->io,
+			KIRKWOOD_RECORD_WIN, addr, priv->dram);
+	}
+
+	return 0;
+}
+
+static int kirkwood_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct snd_soc_dai *cpu_dai = soc_runtime->dai->cpu_dai;
+	struct kirkwood_dma_priv *prdata = cpu_dai->private_data;
+	struct kirkwood_dma_data *priv;
+
+	priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+	if (!prdata || !priv)
+		return 0;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		prdata->play_stream = NULL;
+	else
+		prdata->rec_stream = NULL;
+
+	if (!prdata->play_stream && !prdata->rec_stream) {
+		writel(0, priv->io + KIRKWOOD_ERR_MASK);
+		free_irq(priv->irq, prdata);
+		kfree(prdata);
+		soc_runtime->dai->cpu_dai->private_data = NULL;
+	}
+
+	return 0;
+}
+
+static int kirkwood_dma_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+	runtime->dma_bytes = params_buffer_bytes(params);
+
+	return 0;
+}
+
+static int kirkwood_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_set_runtime_buffer(substream, NULL);
+	return 0;
+}
+
+static int kirkwood_dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct snd_soc_dai *cpu_dai = soc_runtime->dai->cpu_dai;
+	struct kirkwood_dma_data *priv;
+	unsigned long size, count;
+
+	priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+	/* compute buffer size in term of "words" as requested in specs */
+	size = frames_to_bytes(runtime, runtime->buffer_size);
+	size = (size>>2)-1;
+	count = snd_pcm_lib_period_bytes(substream);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		writel(count, priv->io + KIRKWOOD_PLAY_BYTE_INT_COUNT);
+		writel(runtime->dma_addr, priv->io + KIRKWOOD_PLAY_BUF_ADDR);
+		writel(size, priv->io + KIRKWOOD_PLAY_BUF_SIZE);
+	} else {
+		writel(count, priv->io + KIRKWOOD_REC_BYTE_INT_COUNT);
+		writel(runtime->dma_addr, priv->io + KIRKWOOD_REC_BUF_ADDR);
+		writel(size, priv->io + KIRKWOOD_REC_BUF_SIZE);
+	}
+
+
+	return 0;
+}
+
+static snd_pcm_uframes_t kirkwood_dma_pointer(struct snd_pcm_substream
+						*substream)
+{
+	struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
+	struct snd_soc_dai *cpu_dai = soc_runtime->dai->cpu_dai;
+	struct kirkwood_dma_data *priv;
+	snd_pcm_uframes_t count;
+
+	priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		count = bytes_to_frames(substream->runtime,
+			readl(priv->io + KIRKWOOD_PLAY_BYTE_COUNT));
+	else
+		count = bytes_to_frames(substream->runtime,
+			readl(priv->io + KIRKWOOD_REC_BYTE_COUNT));
+
+	return count;
+}
+
+struct snd_pcm_ops kirkwood_dma_ops = {
+	.open =		kirkwood_dma_open,
+	.close =        kirkwood_dma_close,
+	.ioctl =	snd_pcm_lib_ioctl,
+	.hw_params =	kirkwood_dma_hw_params,
+	.hw_free =      kirkwood_dma_hw_free,
+	.prepare =      kirkwood_dma_prepare,
+	.pointer =	kirkwood_dma_pointer,
+};
+
+static int kirkwood_dma_preallocate_dma_buffer(struct snd_pcm *pcm,
+		int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = kirkwood_dma_snd_hw.buffer_bytes_max;
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->area = dma_alloc_coherent(pcm->card->dev, size,
+			&buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	buf->private_data = NULL;
+
+	return 0;
+}
+
+static int kirkwood_dma_new(struct snd_card *card,
+		struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	int ret;
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &kirkwood_dma_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (dai->playback.channels_min) {
+		ret = kirkwood_dma_preallocate_dma_buffer(pcm,
+				SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			return ret;
+	}
+
+	if (dai->capture.channels_min) {
+		ret = kirkwood_dma_preallocate_dma_buffer(pcm,
+				SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void kirkwood_dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_coherent(pcm->card->dev, buf->bytes,
+				buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+struct snd_soc_platform kirkwood_soc_platform = {
+	.name		= "kirkwood-dma",
+	.pcm_ops	= &kirkwood_dma_ops,
+	.pcm_new	= kirkwood_dma_new,
+	.pcm_free	= kirkwood_dma_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(kirkwood_soc_platform);
+
+static int __init kirkwood_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&kirkwood_soc_platform);
+}
+module_init(kirkwood_soc_platform_init);
+
+static void __exit kirkwood_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&kirkwood_soc_platform);
+}
+module_exit(kirkwood_soc_platform_exit);
+
+MODULE_AUTHOR("Arnaud Patard <apatard@mandriva.com>");
+MODULE_DESCRIPTION("Marvell Kirkwood Audio DMA module");
+MODULE_LICENSE("GPL");
+
diff --git a/sound/soc/kirkwood/kirkwood-dma.h b/sound/soc/kirkwood/kirkwood-dma.h
new file mode 100644
index 00000000000..ba4454cd34f
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood-dma.h
@@ -0,0 +1,17 @@
+/*
+ * kirkwood-dma.h
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef _KIRKWOOD_DMA_H
+#define _KIRKWOOD_DMA_H
+
+extern struct snd_soc_platform kirkwood_soc_platform;
+
+#endif
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
new file mode 100644
index 00000000000..981ffc2a13c
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -0,0 +1,495 @@
+/*
+ * kirkwood-i2s.c
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <linux/delay.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <plat/audio.h>
+#include "kirkwood-i2s.h"
+#include "kirkwood.h"
+
+#define DRV_NAME	"kirkwood-i2s"
+
+#define KIRKWOOD_I2S_RATES \
+	(SNDRV_PCM_RATE_44100 | \
+	 SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000)
+#define KIRKWOOD_I2S_FORMATS \
+	(SNDRV_PCM_FMTBIT_S16_LE | \
+	 SNDRV_PCM_FMTBIT_S24_LE | \
+	 SNDRV_PCM_FMTBIT_S32_LE)
+
+
+struct snd_soc_dai kirkwood_i2s_dai;
+static struct kirkwood_dma_data *priv;
+
+static int kirkwood_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	unsigned long mask;
+	unsigned long value;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		mask = KIRKWOOD_I2S_CTL_RJ;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		mask = KIRKWOOD_I2S_CTL_LJ;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		mask = KIRKWOOD_I2S_CTL_I2S;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Set same format for playback and record
+	 * This avoids some troubles.
+	 */
+	value = readl(priv->io+KIRKWOOD_I2S_PLAYCTL);
+	value &= ~KIRKWOOD_I2S_CTL_JUST_MASK;
+	value |= mask;
+	writel(value, priv->io+KIRKWOOD_I2S_PLAYCTL);
+
+	value = readl(priv->io+KIRKWOOD_I2S_RECCTL);
+	value &= ~KIRKWOOD_I2S_CTL_JUST_MASK;
+	value |= mask;
+	writel(value, priv->io+KIRKWOOD_I2S_RECCTL);
+
+	return 0;
+}
+
+static inline void kirkwood_set_dco(void __iomem *io, unsigned long rate)
+{
+	unsigned long value;
+
+	value = KIRKWOOD_DCO_CTL_OFFSET_0;
+	switch (rate) {
+	default:
+	case 44100:
+		value |= KIRKWOOD_DCO_CTL_FREQ_11;
+		break;
+	case 48000:
+		value |= KIRKWOOD_DCO_CTL_FREQ_12;
+		break;
+	case 96000:
+		value |= KIRKWOOD_DCO_CTL_FREQ_24;
+		break;
+	}
+	writel(value, io + KIRKWOOD_DCO_CTL);
+
+	/* wait for dco locked */
+	do {
+		cpu_relax();
+		value = readl(io + KIRKWOOD_DCO_SPCR_STATUS);
+		value &= KIRKWOOD_DCO_SPCR_STATUS;
+	} while (value == 0);
+}
+
+static int kirkwood_i2s_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *dai)
+{
+	unsigned int i2s_reg, reg;
+	unsigned long i2s_value, value;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		i2s_reg = KIRKWOOD_I2S_PLAYCTL;
+		reg = KIRKWOOD_PLAYCTL;
+	} else {
+		i2s_reg = KIRKWOOD_I2S_RECCTL;
+		reg = KIRKWOOD_RECCTL;
+	}
+
+	/* set dco conf */
+	kirkwood_set_dco(priv->io, params_rate(params));
+
+	i2s_value = readl(priv->io+i2s_reg);
+	i2s_value &= ~KIRKWOOD_I2S_CTL_SIZE_MASK;
+
+	value = readl(priv->io+reg);
+	value &= ~KIRKWOOD_PLAYCTL_SIZE_MASK;
+
+	/*
+	 * Size settings in play/rec i2s control regs and play/rec control
+	 * regs must be the same.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		i2s_value |= KIRKWOOD_I2S_CTL_SIZE_16;
+		value |= KIRKWOOD_PLAYCTL_SIZE_16_C;
+		break;
+	/*
+	 * doesn't work... S20_3LE != kirkwood 20bit format ?
+	 *
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		i2s_value |= KIRKWOOD_I2S_CTL_SIZE_20;
+		value |= KIRKWOOD_PLAYCTL_SIZE_20;
+		break;
+	*/
+	case SNDRV_PCM_FORMAT_S24_LE:
+		i2s_value |= KIRKWOOD_I2S_CTL_SIZE_24;
+		value |= KIRKWOOD_PLAYCTL_SIZE_24;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		i2s_value |= KIRKWOOD_I2S_CTL_SIZE_32;
+		value |= KIRKWOOD_PLAYCTL_SIZE_32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		value &= ~KIRKWOOD_PLAYCTL_MONO_MASK;
+		if (params_channels(params) == 1)
+			value |= KIRKWOOD_PLAYCTL_MONO_BOTH;
+		else
+			value |= KIRKWOOD_PLAYCTL_MONO_OFF;
+	}
+
+	writel(i2s_value, priv->io+i2s_reg);
+	writel(value, priv->io+reg);
+
+	return 0;
+}
+
+static int kirkwood_i2s_play_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	unsigned long value;
+
+	/*
+	 * specs says KIRKWOOD_PLAYCTL must be read 2 times before
+	 * changing it. So read 1 time here and 1 later.
+	 */
+	value = readl(priv->io + KIRKWOOD_PLAYCTL);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		/* stop audio, enable interrupts */
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value |= KIRKWOOD_PLAYCTL_PAUSE;
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+
+		value = readl(priv->io + KIRKWOOD_INT_MASK);
+		value |= KIRKWOOD_INT_CAUSE_PLAY_BYTES;
+		writel(value, priv->io + KIRKWOOD_INT_MASK);
+
+		/* configure audio & enable i2s playback */
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value &= ~KIRKWOOD_PLAYCTL_BURST_MASK;
+		value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE
+				| KIRKWOOD_PLAYCTL_SPDIF_EN);
+
+		if (priv->burst == 32)
+			value |= KIRKWOOD_PLAYCTL_BURST_32;
+		else
+			value |= KIRKWOOD_PLAYCTL_BURST_128;
+		value |= KIRKWOOD_PLAYCTL_I2S_EN;
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		/* stop audio, disable interrupts */
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+
+		value = readl(priv->io + KIRKWOOD_INT_MASK);
+		value &= ~KIRKWOOD_INT_CAUSE_PLAY_BYTES;
+		writel(value, priv->io + KIRKWOOD_INT_MASK);
+
+		/* disable all playbacks */
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value &= ~(KIRKWOOD_PLAYCTL_I2S_EN | KIRKWOOD_PLAYCTL_SPDIF_EN);
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value |= KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE;
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		value = readl(priv->io + KIRKWOOD_PLAYCTL);
+		value &= ~(KIRKWOOD_PLAYCTL_PAUSE | KIRKWOOD_PLAYCTL_I2S_MUTE);
+		writel(value, priv->io + KIRKWOOD_PLAYCTL);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int kirkwood_i2s_rec_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	unsigned long value;
+
+	value = readl(priv->io + KIRKWOOD_RECCTL);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		/* stop audio, enable interrupts */
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value |= KIRKWOOD_RECCTL_PAUSE;
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+
+		value = readl(priv->io + KIRKWOOD_INT_MASK);
+		value |= KIRKWOOD_INT_CAUSE_REC_BYTES;
+		writel(value, priv->io + KIRKWOOD_INT_MASK);
+
+		/* configure audio & enable i2s record */
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value &= ~KIRKWOOD_RECCTL_BURST_MASK;
+		value &= ~KIRKWOOD_RECCTL_MONO;
+		value &= ~(KIRKWOOD_RECCTL_PAUSE | KIRKWOOD_RECCTL_MUTE
+			| KIRKWOOD_RECCTL_SPDIF_EN);
+
+		if (priv->burst == 32)
+			value |= KIRKWOOD_RECCTL_BURST_32;
+		else
+			value |= KIRKWOOD_RECCTL_BURST_128;
+		value |= KIRKWOOD_RECCTL_I2S_EN;
+
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		/* stop audio, disable interrupts */
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value |= KIRKWOOD_RECCTL_PAUSE | KIRKWOOD_RECCTL_MUTE;
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+
+		value = readl(priv->io + KIRKWOOD_INT_MASK);
+		value &= ~KIRKWOOD_INT_CAUSE_REC_BYTES;
+		writel(value, priv->io + KIRKWOOD_INT_MASK);
+
+		/* disable all records */
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value &= ~(KIRKWOOD_RECCTL_I2S_EN | KIRKWOOD_RECCTL_SPDIF_EN);
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value |= KIRKWOOD_RECCTL_PAUSE | KIRKWOOD_RECCTL_MUTE;
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+		break;
+
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		value = readl(priv->io + KIRKWOOD_RECCTL);
+		value &= ~(KIRKWOOD_RECCTL_PAUSE | KIRKWOOD_RECCTL_MUTE);
+		writel(value, priv->io + KIRKWOOD_RECCTL);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int kirkwood_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		return kirkwood_i2s_play_trigger(substream, cmd, dai);
+	else
+		return kirkwood_i2s_rec_trigger(substream, cmd, dai);
+
+	return 0;
+}
+
+static int kirkwood_i2s_probe(struct platform_device *pdev,
+			     struct snd_soc_dai *dai)
+{
+	unsigned long value;
+	unsigned int reg_data;
+
+	/* put system in a "safe" state : */
+	/* disable audio interrupts */
+	writel(0xffffffff, priv->io + KIRKWOOD_INT_CAUSE);
+	writel(0, priv->io + KIRKWOOD_INT_MASK);
+
+	reg_data = readl(priv->io + 0x1200);
+	reg_data &= (~(0x333FF8));
+	reg_data |= 0x111D18;
+	writel(reg_data, priv->io + 0x1200);
+
+	msleep(500);
+
+	reg_data = readl(priv->io + 0x1200);
+	reg_data &= (~(0x333FF8));
+	reg_data |= 0x111D18;
+	writel(reg_data, priv->io + 0x1200);
+
+	/* disable playback/record */
+	value = readl(priv->io + KIRKWOOD_PLAYCTL);
+	value &= ~(KIRKWOOD_PLAYCTL_I2S_EN|KIRKWOOD_PLAYCTL_SPDIF_EN);
+	writel(value, priv->io + KIRKWOOD_PLAYCTL);
+
+	value = readl(priv->io + KIRKWOOD_RECCTL);
+	value &= ~(KIRKWOOD_RECCTL_I2S_EN | KIRKWOOD_RECCTL_SPDIF_EN);
+	writel(value, priv->io + KIRKWOOD_RECCTL);
+
+	return 0;
+
+}
+
+static void kirkwood_i2s_remove(struct platform_device *pdev,
+				struct snd_soc_dai *dai)
+{
+}
+
+static struct snd_soc_dai_ops kirkwood_i2s_dai_ops = {
+	.trigger	= kirkwood_i2s_trigger,
+	.hw_params      = kirkwood_i2s_hw_params,
+	.set_fmt        = kirkwood_i2s_set_fmt,
+};
+
+
+struct snd_soc_dai kirkwood_i2s_dai = {
+	.name = DRV_NAME,
+	.id = 0,
+	.probe = kirkwood_i2s_probe,
+	.remove = kirkwood_i2s_remove,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = KIRKWOOD_I2S_RATES,
+		.formats = KIRKWOOD_I2S_FORMATS,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = KIRKWOOD_I2S_RATES,
+		.formats = KIRKWOOD_I2S_FORMATS,},
+	.ops = &kirkwood_i2s_dai_ops,
+};
+EXPORT_SYMBOL_GPL(kirkwood_i2s_dai);
+
+static __devinit int kirkwood_i2s_dev_probe(struct platform_device *pdev)
+{
+	struct resource *mem;
+	struct kirkwood_asoc_platform_data *data =
+		pdev->dev.platform_data;
+	int err;
+
+	priv = kzalloc(sizeof(struct kirkwood_dma_data), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "allocation failed\n");
+		err = -ENOMEM;
+		goto error;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "platform_get_resource failed\n");
+		err = -ENXIO;
+		goto err_alloc;
+	}
+
+	priv->mem = request_mem_region(mem->start, SZ_16K, DRV_NAME);
+	if (!priv->mem) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		err = -EBUSY;
+		goto error;
+	}
+
+	priv->io = ioremap(priv->mem->start, SZ_16K);
+	if (!priv->io) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		err = -ENOMEM;
+		goto err_iomem;
+	}
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq <= 0) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		err = -ENXIO;
+		goto err_ioremap;
+	}
+
+	if (!data || !data->dram) {
+		dev_err(&pdev->dev, "no platform data ?!\n");
+		err = -EINVAL;
+		goto err_ioremap;
+	}
+
+	priv->dram = data->dram;
+	priv->burst = data->burst;
+
+	kirkwood_i2s_dai.capture.dma_data = priv;
+	kirkwood_i2s_dai.playback.dma_data = priv;
+
+	return snd_soc_register_dai(&kirkwood_i2s_dai);
+
+err_ioremap:
+	iounmap(priv->io);
+err_iomem:
+	release_mem_region(priv->mem->start, SZ_16K);
+err_alloc:
+	kfree(priv);
+error:
+	return err;
+}
+
+static __devexit int kirkwood_i2s_dev_remove(struct platform_device *pdev)
+{
+	if (priv) {
+		iounmap(priv->io);
+		release_mem_region(priv->mem->start, SZ_16K);
+		kfree(priv);
+	}
+	snd_soc_unregister_dai(&kirkwood_i2s_dai);
+	return 0;
+}
+
+static struct platform_driver kirkwood_i2s_driver = {
+	.probe  = kirkwood_i2s_dev_probe,
+	.remove = kirkwood_i2s_dev_remove,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init kirkwood_i2s_init(void)
+{
+	return platform_driver_register(&kirkwood_i2s_driver);
+}
+module_init(kirkwood_i2s_init);
+
+static void __exit kirkwood_i2s_exit(void)
+{
+	platform_driver_unregister(&kirkwood_i2s_driver);
+}
+module_exit(kirkwood_i2s_exit);
+
+/* Module information */
+MODULE_AUTHOR("Arnaud Patard, <apatard@mandriva.com>");
+MODULE_DESCRIPTION("Kirkwood I2S SoC Interface");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kirkwood-i2s");
diff --git a/sound/soc/kirkwood/kirkwood-i2s.h b/sound/soc/kirkwood/kirkwood-i2s.h
new file mode 100644
index 00000000000..c5595c616d7
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood-i2s.h
@@ -0,0 +1,17 @@
+/*
+ * kirkwood-i2s.h
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef _KIRKWOOD_I2S_H
+#define _KIRKWOOD_I2S_H
+
+extern struct snd_soc_dai kirkwood_i2s_dai;
+
+#endif
diff --git a/sound/soc/kirkwood/kirkwood-openrd.c b/sound/soc/kirkwood/kirkwood-openrd.c
new file mode 100644
index 00000000000..0353d06bc41
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood-openrd.c
@@ -0,0 +1,126 @@
+/*
+ * kirkwood-openrd.c
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <mach/kirkwood.h>
+#include <plat/audio.h>
+#include <asm/mach-types.h>
+#include "kirkwood-i2s.h"
+#include "kirkwood-dma.h"
+#include "../codecs/cs42l51.h"
+
+static int openrd_client_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+	unsigned int freq, fmt;
+
+	fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS;
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+	if (ret < 0)
+		return ret;
+
+	switch (params_rate(params)) {
+	default:
+	case 44100:
+		freq = 11289600;
+		break;
+	case 48000:
+		freq = 12288000;
+		break;
+	case 96000:
+		freq = 24576000;
+		break;
+	}
+
+	return snd_soc_dai_set_sysclk(codec_dai, 0, freq, SND_SOC_CLOCK_IN);
+
+}
+
+static struct snd_soc_ops openrd_client_ops = {
+	.hw_params = openrd_client_hw_params,
+};
+
+
+static struct snd_soc_dai_link openrd_client_dai[] = {
+{
+	.name = "CS42L51",
+	.stream_name = "CS42L51 HiFi",
+	.cpu_dai = &kirkwood_i2s_dai,
+	.codec_dai = &cs42l51_dai,
+	.ops = &openrd_client_ops,
+},
+};
+
+
+static struct snd_soc_card openrd_client = {
+	.name = "OpenRD Client",
+	.platform = &kirkwood_soc_platform,
+	.dai_link = openrd_client_dai,
+	.num_links = ARRAY_SIZE(openrd_client_dai),
+};
+
+static struct snd_soc_device openrd_client_snd_devdata = {
+	.card = &openrd_client,
+	.codec_dev = &soc_codec_device_cs42l51,
+};
+
+static struct platform_device *openrd_client_snd_device;
+
+static int __init openrd_client_init(void)
+{
+	int ret;
+
+	if (!machine_is_openrd_client())
+		return 0;
+
+	openrd_client_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!openrd_client_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(openrd_client_snd_device,
+			&openrd_client_snd_devdata);
+	openrd_client_snd_devdata.dev = &openrd_client_snd_device->dev;
+
+	ret = platform_device_add(openrd_client_snd_device);
+	if (ret) {
+		printk(KERN_ERR "%s: platform_device_add failed\n", __func__);
+		platform_device_put(openrd_client_snd_device);
+	}
+
+	return ret;
+}
+
+static void __exit openrd_client_exit(void)
+{
+	platform_device_unregister(openrd_client_snd_device);
+}
+
+module_init(openrd_client_init);
+module_exit(openrd_client_exit);
+
+/* Module information */
+MODULE_AUTHOR("Arnaud Patard <apatard@mandriva.com>");
+MODULE_DESCRIPTION("ALSA SoC OpenRD Client");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:soc-audio");
diff --git a/sound/soc/kirkwood/kirkwood.h b/sound/soc/kirkwood/kirkwood.h
new file mode 100644
index 00000000000..bb6e6a5648c
--- /dev/null
+++ b/sound/soc/kirkwood/kirkwood.h
@@ -0,0 +1,129 @@
+/*
+ * kirkwood.h
+ *
+ * (c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef _KIRKWOOD_AUDIO_H
+#define _KIRKWOOD_AUDIO_H
+
+#define KIRKWOOD_RECORD_WIN			0
+#define KIRKWOOD_PLAYBACK_WIN			1
+#define KIRKWOOD_MAX_AUDIO_WIN			2
+
+#define KIRKWOOD_AUDIO_WIN_BASE_REG(win)	(0xA00 + ((win)<<3))
+#define KIRKWOOD_AUDIO_WIN_CTRL_REG(win)	(0xA04 + ((win)<<3))
+
+
+#define KIRKWOOD_RECCTL			0x1000
+#define KIRKWOOD_RECCTL_SPDIF_EN		(1<<11)
+#define KIRKWOOD_RECCTL_I2S_EN			(1<<10)
+#define KIRKWOOD_RECCTL_PAUSE			(1<<9)
+#define KIRKWOOD_RECCTL_MUTE			(1<<8)
+#define KIRKWOOD_RECCTL_BURST_MASK		(3<<5)
+#define KIRKWOOD_RECCTL_BURST_128		(2<<5)
+#define KIRKWOOD_RECCTL_BURST_32		(1<<5)
+#define KIRKWOOD_RECCTL_MONO			(1<<4)
+#define KIRKWOOD_RECCTL_MONO_CHAN_RIGHT	(1<<3)
+#define KIRKWOOD_RECCTL_MONO_CHAN_LEFT		(0<<3)
+#define KIRKWOOD_RECCTL_SIZE_MASK		(7<<0)
+#define KIRKWOOD_RECCTL_SIZE_16		(7<<0)
+#define KIRKWOOD_RECCTL_SIZE_16_C		(3<<0)
+#define KIRKWOOD_RECCTL_SIZE_20		(2<<0)
+#define KIRKWOOD_RECCTL_SIZE_24		(1<<0)
+#define KIRKWOOD_RECCTL_SIZE_32		(0<<0)
+
+#define KIRKWOOD_REC_BUF_ADDR			0x1004
+#define KIRKWOOD_REC_BUF_SIZE			0x1008
+#define KIRKWOOD_REC_BYTE_COUNT			0x100C
+
+#define KIRKWOOD_PLAYCTL			0x1100
+#define KIRKWOOD_PLAYCTL_PLAY_BUSY		(1<<16)
+#define KIRKWOOD_PLAYCTL_BURST_MASK		(3<<11)
+#define KIRKWOOD_PLAYCTL_BURST_128		(2<<11)
+#define KIRKWOOD_PLAYCTL_BURST_32		(1<<11)
+#define KIRKWOOD_PLAYCTL_PAUSE			(1<<9)
+#define KIRKWOOD_PLAYCTL_SPDIF_MUTE		(1<<8)
+#define KIRKWOOD_PLAYCTL_MONO_MASK		(3<<5)
+#define KIRKWOOD_PLAYCTL_MONO_BOTH		(3<<5)
+#define KIRKWOOD_PLAYCTL_MONO_OFF		(0<<5)
+#define KIRKWOOD_PLAYCTL_I2S_MUTE		(1<<7)
+#define KIRKWOOD_PLAYCTL_SPDIF_EN		(1<<4)
+#define KIRKWOOD_PLAYCTL_I2S_EN		(1<<3)
+#define KIRKWOOD_PLAYCTL_SIZE_MASK		(7<<0)
+#define KIRKWOOD_PLAYCTL_SIZE_16		(7<<0)
+#define KIRKWOOD_PLAYCTL_SIZE_16_C		(3<<0)
+#define KIRKWOOD_PLAYCTL_SIZE_20		(2<<0)
+#define KIRKWOOD_PLAYCTL_SIZE_24		(1<<0)
+#define KIRKWOOD_PLAYCTL_SIZE_32		(0<<0)
+
+#define KIRKWOOD_PLAY_BUF_ADDR			0x1104
+#define KIRKWOOD_PLAY_BUF_SIZE			0x1108
+#define KIRKWOOD_PLAY_BYTE_COUNT		0x110C
+
+#define KIRKWOOD_DCO_CTL			0x1204
+#define KIRKWOOD_DCO_CTL_OFFSET_MASK		(0xFFF<<2)
+#define KIRKWOOD_DCO_CTL_OFFSET_0		(0x800<<2)
+#define KIRKWOOD_DCO_CTL_FREQ_MASK		(3<<0)
+#define KIRKWOOD_DCO_CTL_FREQ_11		(0<<0)
+#define KIRKWOOD_DCO_CTL_FREQ_12		(1<<0)
+#define KIRKWOOD_DCO_CTL_FREQ_24		(2<<0)
+
+#define KIRKWOOD_DCO_SPCR_STATUS		0x120c
+#define KIRKWOOD_DCO_SPCR_STATUS_DCO_LOCK	(1<<16)
+
+#define KIRKWOOD_ERR_CAUSE			0x1300
+#define KIRKWOOD_ERR_MASK			0x1304
+
+#define KIRKWOOD_INT_CAUSE			0x1308
+#define KIRKWOOD_INT_MASK			0x130C
+#define KIRKWOOD_INT_CAUSE_PLAY_BYTES		(1<<14)
+#define KIRKWOOD_INT_CAUSE_REC_BYTES		(1<<13)
+#define KIRKWOOD_INT_CAUSE_DMA_PLAY_END	(1<<7)
+#define KIRKWOOD_INT_CAUSE_DMA_PLAY_3Q		(1<<6)
+#define KIRKWOOD_INT_CAUSE_DMA_PLAY_HALF	(1<<5)
+#define KIRKWOOD_INT_CAUSE_DMA_PLAY_1Q		(1<<4)
+#define KIRKWOOD_INT_CAUSE_DMA_REC_END		(1<<3)
+#define KIRKWOOD_INT_CAUSE_DMA_REC_3Q		(1<<2)
+#define KIRKWOOD_INT_CAUSE_DMA_REC_HALF	(1<<1)
+#define KIRKWOOD_INT_CAUSE_DMA_REC_1Q		(1<<0)
+
+#define KIRKWOOD_REC_BYTE_INT_COUNT		0x1310
+#define KIRKWOOD_PLAY_BYTE_INT_COUNT		0x1314
+#define KIRKWOOD_BYTE_INT_COUNT_MASK		0xffffff
+
+#define KIRKWOOD_I2S_PLAYCTL			0x2508
+#define KIRKWOOD_I2S_RECCTL			0x2408
+#define KIRKWOOD_I2S_CTL_JUST_MASK		(0xf<<26)
+#define KIRKWOOD_I2S_CTL_LJ			(0<<26)
+#define KIRKWOOD_I2S_CTL_I2S			(5<<26)
+#define KIRKWOOD_I2S_CTL_RJ			(8<<26)
+#define KIRKWOOD_I2S_CTL_SIZE_MASK		(3<<30)
+#define KIRKWOOD_I2S_CTL_SIZE_16		(3<<30)
+#define KIRKWOOD_I2S_CTL_SIZE_20		(2<<30)
+#define KIRKWOOD_I2S_CTL_SIZE_24		(1<<30)
+#define KIRKWOOD_I2S_CTL_SIZE_32		(0<<30)
+
+#define KIRKWOOD_AUDIO_BUF_MAX			(16*1024*1024)
+
+/* Theses values come from the marvell alsa driver */
+/* need to find where they come from               */
+#define KIRKWOOD_SND_MIN_PERIODS		8
+#define KIRKWOOD_SND_MAX_PERIODS		16
+#define KIRKWOOD_SND_MIN_PERIOD_BYTES		0x4000
+#define KIRKWOOD_SND_MAX_PERIOD_BYTES		0x4000
+
+struct kirkwood_dma_data {
+	struct resource *mem;
+	void __iomem *io;
+	int irq;
+	int burst;
+	struct mbus_dram_target_info *dram;
+};
+
+#endif
diff --git a/sound/soc/nuc900/Kconfig b/sound/soc/nuc900/Kconfig
new file mode 100644
index 00000000000..a0ed1c618f6
--- /dev/null
+++ b/sound/soc/nuc900/Kconfig
@@ -0,0 +1,27 @@
+##
+## NUC900 series AC97 API
+##
+config SND_SOC_NUC900
+	tristate "SoC Audio for NUC900 series"
+	depends on ARCH_W90X900
+	help
+	  This option enables support for AC97 mode on the NUC900 SoC.
+
+config SND_SOC_NUC900_AC97
+	tristate
+	select AC97_BUS
+	select SND_AC97_CODEC
+	select SND_SOC_AC97_BUS
+
+
+##
+## Boards
+##
+config SND_SOC_NUC900EVB
+	tristate "NUC900 AC97 support for demo board"
+	depends on SND_SOC_NUC900
+	select SND_SOC_NUC900_AC97
+	select SND_SOC_AC97_CODEC
+	help
+	  Select this option to enable audio (AC97) on the
+	  NUC900 demoboard.
diff --git a/sound/soc/nuc900/Makefile b/sound/soc/nuc900/Makefile
new file mode 100644
index 00000000000..7e46c715031
--- /dev/null
+++ b/sound/soc/nuc900/Makefile
@@ -0,0 +1,11 @@
+# NUC900 series audio
+snd-soc-nuc900-pcm-objs := nuc900-pcm.o
+snd-soc-nuc900-ac97-objs := nuc900-ac97.o
+
+obj-$(CONFIG_SND_SOC_NUC900) += snd-soc-nuc900-pcm.o
+obj-$(CONFIG_SND_SOC_NUC900_AC97) += snd-soc-nuc900-ac97.o
+
+# Boards
+snd-soc-nuc900-audio-objs := nuc900-audio.o
+
+obj-$(CONFIG_SND_SOC_NUC900EVB) += snd-soc-nuc900-audio.o
diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
new file mode 100644
index 00000000000..caa7c901bc2
--- /dev/null
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2009-2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/suspend.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+
+#include <mach/mfp.h>
+
+#include "nuc900-audio.h"
+
+static DEFINE_MUTEX(ac97_mutex);
+struct nuc900_audio *nuc900_ac97_data;
+
+static int nuc900_checkready(void)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+
+	if (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACIS0) & CODEC_READY))
+		return -EPERM;
+
+	return 0;
+}
+
+/* AC97 controller reads codec register */
+static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97,
+					unsigned short reg)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	unsigned long timeout = 0x10000, val;
+
+	mutex_lock(&ac97_mutex);
+
+	val = nuc900_checkready();
+	if (!!val) {
+		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
+		goto out;
+	}
+
+	/* set the R_WB bit and write register index */
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS1, R_WB | reg);
+
+	/* set the valid frame bit and valid slots */
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0);
+	val |= (VALID_FRAME | SLOT1_VALID);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, val);
+
+	udelay(100);
+
+	/* polling the AC_R_FINISH */
+	while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH)
+								&& timeout--)
+		mdelay(1);
+
+	if (!timeout) {
+		dev_err(nuc900_audio->dev, "AC97 read register time out !\n");
+		val = -EPERM;
+		goto out;
+	}
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0) ;
+	val &= ~SLOT1_VALID;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, val);
+
+	if (AUDIO_READ(nuc900_audio->mmio + ACTL_ACIS1) >> 2 != reg) {
+		dev_err(nuc900_audio->dev,
+				"R_INDEX of REG_ACTL_ACIS1 not match!\n");
+	}
+
+	udelay(100);
+	val = (AUDIO_READ(nuc900_audio->mmio + ACTL_ACIS2) & 0xFFFF);
+
+out:
+	mutex_unlock(&ac97_mutex);
+	return val;
+}
+
+/* AC97 controller writes to codec register */
+static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+				unsigned short val)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	unsigned long tmp, timeout = 0x10000;
+
+	mutex_lock(&ac97_mutex);
+
+	tmp = nuc900_checkready();
+	if (!!tmp)
+		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
+
+	/* clear the R_WB bit and write register index */
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS1, reg);
+
+	/* write register value */
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS2, val);
+
+	/* set the valid frame bit and valid slots */
+	tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0);
+	tmp |= SLOT1_VALID | SLOT2_VALID | VALID_FRAME;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, tmp);
+
+	udelay(100);
+
+	/* polling the AC_W_FINISH */
+	while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH)
+								&& timeout--)
+		mdelay(1);
+
+	if (!timeout)
+		dev_err(nuc900_audio->dev, "AC97 write register time out !\n");
+
+	tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0);
+	tmp &= ~(SLOT1_VALID | SLOT2_VALID);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, tmp);
+
+	mutex_unlock(&ac97_mutex);
+
+}
+
+static void nuc900_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	unsigned long val;
+
+	mutex_lock(&ac97_mutex);
+
+	/* warm reset AC 97 */
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON);
+	val |= AC_W_RES;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACCON, val);
+
+	udelay(100);
+
+	val = nuc900_checkready();
+	if (!!val)
+		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
+
+	mutex_unlock(&ac97_mutex);
+}
+
+static void nuc900_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	unsigned long val;
+
+	mutex_lock(&ac97_mutex);
+
+	/* reset Audio Controller */
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+	val |= ACTL_RESET_BIT;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+	val &= (~ACTL_RESET_BIT);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+	/* reset AC-link interface */
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+	val |= AC_RESET;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+	val &= ~AC_RESET;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+	/* cold reset AC 97 */
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON);
+	val |= AC_C_RES;
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACCON, val);
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON);
+	val &= (~AC_C_RES);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACCON, val);
+
+	udelay(100);
+
+	mutex_unlock(&ac97_mutex);
+
+}
+
+/* AC97 controller operations */
+struct snd_ac97_bus_ops soc_ac97_ops = {
+	.read		= nuc900_ac97_read,
+	.write		= nuc900_ac97_write,
+	.reset		= nuc900_ac97_cold_reset,
+	.warm_reset	= nuc900_ac97_warm_reset,
+}
+EXPORT_SYMBOL_GPL(soc_ac97_ops);
+
+static int nuc900_ac97_trigger(struct snd_pcm_substream *substream,
+				int cmd, struct snd_soc_dai *dai)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	int ret;
+	unsigned long val, tmp;
+
+	ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0);
+			tmp |= (SLOT3_VALID | SLOT4_VALID | VALID_FRAME);
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, tmp);
+
+			tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_PSR);
+			tmp |= (P_DMA_END_IRQ | P_DMA_MIDDLE_IRQ);
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_PSR, tmp);
+			val |= AC_PLAY;
+		} else {
+			tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_RSR);
+			tmp |= (R_DMA_END_IRQ | R_DMA_MIDDLE_IRQ);
+
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_RSR, tmp);
+			val |= AC_RECORD;
+		}
+
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			tmp = AUDIO_READ(nuc900_audio->mmio + ACTL_ACOS0);
+			tmp &= ~(SLOT3_VALID | SLOT4_VALID);
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_ACOS0, tmp);
+
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_PSR, RESET_PRSR);
+			val &= ~AC_PLAY;
+		} else {
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_RSR, RESET_PRSR);
+			val &= ~AC_RECORD;
+		}
+
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int nuc900_ac97_probe(struct platform_device *pdev,
+					struct snd_soc_dai *dai)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+	unsigned long val;
+
+	mutex_lock(&ac97_mutex);
+
+	/* enable unit clock */
+	clk_enable(nuc900_audio->clk);
+
+	/* enable audio controller and AC-link interface */
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_CON);
+	val |= (IIS_AC_PIN_SEL | ACLINK_EN);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_CON, val);
+
+	mutex_unlock(&ac97_mutex);
+
+	return 0;
+}
+
+static void nuc900_ac97_remove(struct platform_device *pdev,
+						struct snd_soc_dai *dai)
+{
+	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
+
+	clk_disable(nuc900_audio->clk);
+}
+
+static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
+	.trigger	= nuc900_ac97_trigger,
+};
+
+struct snd_soc_dai nuc900_ac97_dai = {
+	.name			= "nuc900-ac97",
+	.probe			= nuc900_ac97_probe,
+	.remove			= nuc900_ac97_remove,
+	.ac97_control		= 1,
+	.playback = {
+		.rates		= SNDRV_PCM_RATE_8000_48000,
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,
+		.channels_min	= 1,
+		.channels_max	= 2,
+	},
+	.capture = {
+		.rates		= SNDRV_PCM_RATE_8000_48000,
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,
+		.channels_min	= 1,
+		.channels_max	= 2,
+	},
+	.ops = &nuc900_ac97_dai_ops,
+}
+EXPORT_SYMBOL_GPL(nuc900_ac97_dai);
+
+static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
+{
+	struct nuc900_audio *nuc900_audio;
+	int ret;
+
+	if (nuc900_ac97_data)
+		return -EBUSY;
+
+	nuc900_audio = kzalloc(sizeof(struct nuc900_audio), GFP_KERNEL);
+	if (!nuc900_audio)
+		return -ENOMEM;
+
+	spin_lock_init(&nuc900_audio->lock);
+
+	nuc900_audio->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!nuc900_audio->res) {
+		ret = -ENODEV;
+		goto out0;
+	}
+
+	if (!request_mem_region(nuc900_audio->res->start,
+			resource_size(nuc900_audio->res), pdev->name)) {
+		ret = -EBUSY;
+		goto out0;
+	}
+
+	nuc900_audio->mmio = ioremap(nuc900_audio->res->start,
+					resource_size(nuc900_audio->res));
+	if (!nuc900_audio->mmio) {
+		ret = -ENOMEM;
+		goto out1;
+	}
+
+	nuc900_audio->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nuc900_audio->clk)) {
+		ret = PTR_ERR(nuc900_audio->clk);
+		goto out2;
+	}
+
+	nuc900_audio->irq_num = platform_get_irq(pdev, 0);
+	if (!nuc900_audio->irq_num) {
+		ret = -EBUSY;
+		goto out2;
+	}
+
+	nuc900_ac97_data = nuc900_audio;
+
+	nuc900_audio->dev = nuc900_ac97_dai.dev =  &pdev->dev;
+
+	ret = snd_soc_register_dai(&nuc900_ac97_dai);
+	if (ret)
+		goto out3;
+
+	mfp_set_groupg(nuc900_audio->dev); /* enbale ac97 multifunction pin*/
+
+	return 0;
+
+out3:
+	clk_put(nuc900_audio->clk);
+out2:
+	iounmap(nuc900_audio->mmio);
+out1:
+	release_mem_region(nuc900_audio->res->start,
+					resource_size(nuc900_audio->res));
+out0:
+	kfree(nuc900_audio);
+	return ret;
+}
+
+static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
+{
+
+	snd_soc_unregister_dai(&nuc900_ac97_dai);
+
+	clk_put(nuc900_ac97_data->clk);
+	iounmap(nuc900_ac97_data->mmio);
+	release_mem_region(nuc900_ac97_data->res->start,
+				resource_size(nuc900_ac97_data->res));
+
+	nuc900_ac97_data = NULL;
+
+	return 0;
+}
+
+static struct platform_driver nuc900_ac97_driver = {
+	.driver	= {
+		.name	= "nuc900-audio",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= nuc900_ac97_drvprobe,
+	.remove		= __devexit_p(nuc900_ac97_drvremove),
+};
+
+static int __init nuc900_ac97_init(void)
+{
+	return platform_driver_register(&nuc900_ac97_driver);
+}
+
+static void __exit nuc900_ac97_exit(void)
+{
+	platform_driver_unregister(&nuc900_ac97_driver);
+}
+
+module_init(nuc900_ac97_init);
+module_exit(nuc900_ac97_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("NUC900 AC97 SoC driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-ac97");
diff --git a/sound/soc/nuc900/nuc900-audio.c b/sound/soc/nuc900/nuc900-audio.c
new file mode 100644
index 00000000000..72e6f518f7b
--- /dev/null
+++ b/sound/soc/nuc900/nuc900-audio.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/ac97.h"
+#include "nuc900-audio.h"
+
+static struct snd_soc_dai_link nuc900evb_ac97_dai = {
+	.name		= "AC97",
+	.stream_name	= "AC97 HiFi",
+	.cpu_dai	= &nuc900_ac97_dai,
+	.codec_dai	= &ac97_dai,
+};
+
+static struct snd_soc_card nuc900evb_audio_machine = {
+	.name		= "NUC900EVB_AC97",
+	.dai_link	= &nuc900evb_ac97_dai,
+	.num_links	= 1,
+	.platform	= &nuc900_soc_platform,
+};
+
+static struct snd_soc_device nuc900evb_ac97_devdata = {
+	.card		= &nuc900evb_audio_machine,
+	.codec_dev	= &soc_codec_dev_ac97,
+};
+
+static struct platform_device *nuc900evb_asoc_dev;
+
+static int __init nuc900evb_audio_init(void)
+{
+	int ret;
+
+	ret = -ENOMEM;
+	nuc900evb_asoc_dev = platform_device_alloc("soc-audio", -1);
+	if (!nuc900evb_asoc_dev)
+		goto out;
+
+	/* nuc900 board audio device */
+	platform_set_drvdata(nuc900evb_asoc_dev, &nuc900evb_ac97_devdata);
+
+	nuc900evb_ac97_devdata.dev = &nuc900evb_asoc_dev->dev;
+	ret = platform_device_add(nuc900evb_asoc_dev);
+
+	if (ret) {
+		platform_device_put(nuc900evb_asoc_dev);
+		nuc900evb_asoc_dev = NULL;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit nuc900evb_audio_exit(void)
+{
+	platform_device_unregister(nuc900evb_asoc_dev);
+}
+
+module_init(nuc900evb_audio_init);
+module_exit(nuc900evb_audio_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("NUC900 Series ASoC audio support");
+MODULE_AUTHOR("Wan ZongShun");
diff --git a/sound/soc/nuc900/nuc900-audio.h b/sound/soc/nuc900/nuc900-audio.h
new file mode 100644
index 00000000000..3038f519729
--- /dev/null
+++ b/sound/soc/nuc900/nuc900-audio.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef _NUC900_AUDIO_H
+#define _NUC900_AUDIO_H
+
+#include <linux/io.h>
+
+/* Audio Control Registers */
+#define ACTL_CON		0x00
+#define ACTL_RESET		0x04
+#define ACTL_RDSTB		0x08
+#define ACTL_RDST_LENGTH	0x0C
+#define ACTL_RDSTC		0x10
+#define ACTL_RSR		0x14
+#define ACTL_PDSTB		0x18
+#define ACTL_PDST_LENGTH	0x1C
+#define ACTL_PDSTC		0x20
+#define ACTL_PSR		0x24
+#define ACTL_IISCON		0x28
+#define ACTL_ACCON		0x2C
+#define ACTL_ACOS0		0x30
+#define ACTL_ACOS1		0x34
+#define ACTL_ACOS2		0x38
+#define ACTL_ACIS0		0x3C
+#define ACTL_ACIS1		0x40
+#define ACTL_ACIS2		0x44
+#define ACTL_COUNTER		0x48
+
+/* bit definition of REG_ACTL_CON register */
+#define R_DMA_IRQ		0x1000
+#define T_DMA_IRQ		0x0800
+#define IIS_AC_PIN_SEL		0x0100
+#define FIFO_TH			0x0080
+#define ADC_EN			0x0010
+#define M80_EN			0x0008
+#define ACLINK_EN		0x0004
+#define IIS_EN			0x0002
+
+/* bit definition of REG_ACTL_RESET register */
+#define W5691_PLAY		0x20000
+#define ACTL_RESET_BIT		0x10000
+#define RECORD_RIGHT_CHNNEL	0x08000
+#define RECORD_LEFT_CHNNEL	0x04000
+#define PLAY_RIGHT_CHNNEL	0x02000
+#define PLAY_LEFT_CHNNEL	0x01000
+#define DAC_PLAY		0x00800
+#define ADC_RECORD		0x00400
+#define M80_PLAY		0x00200
+#define AC_RECORD		0x00100
+#define AC_PLAY			0x00080
+#define IIS_RECORD		0x00040
+#define IIS_PLAY		0x00020
+#define DAC_RESET		0x00010
+#define ADC_RESET		0x00008
+#define M80_RESET		0x00004
+#define AC_RESET		0x00002
+#define IIS_RESET		0x00001
+
+/* bit definition of REG_ACTL_ACCON register */
+#define AC_BCLK_PU_EN		0x20
+#define AC_R_FINISH		0x10
+#define AC_W_FINISH		0x08
+#define AC_W_RES		0x04
+#define AC_C_RES		0x02
+
+/* bit definition of ACTL_RSR register */
+#define R_FIFO_EMPTY		0x04
+#define R_DMA_END_IRQ		0x02
+#define R_DMA_MIDDLE_IRQ	0x01
+
+/* bit definition of ACTL_PSR register */
+#define P_FIFO_EMPTY		0x04
+#define P_DMA_END_IRQ		0x02
+#define P_DMA_MIDDLE_IRQ	0x01
+
+/* bit definition of ACTL_ACOS0 register */
+#define SLOT1_VALID		0x01
+#define SLOT2_VALID		0x02
+#define SLOT3_VALID		0x04
+#define SLOT4_VALID		0x08
+#define VALID_FRAME		0x10
+
+/* bit definition of ACTL_ACOS1 register */
+#define R_WB			0x80
+
+#define CODEC_READY		0x10
+#define RESET_PRSR		0x00
+#define AUDIO_WRITE(addr, val)	__raw_writel(val, addr)
+#define AUDIO_READ(addr)	__raw_readl(addr)
+
+struct nuc900_audio {
+	void __iomem *mmio;
+	spinlock_t lock;
+	dma_addr_t dma_addr[2];
+	unsigned long buffersize[2];
+	unsigned long irq_num;
+	struct snd_pcm_substream *substream;
+	struct resource *res;
+	struct clk *clk;
+	struct device *dev;
+
+};
+
+extern struct nuc900_audio *nuc900_ac97_data;
+extern struct snd_soc_dai nuc900_ac97_dai;
+extern struct snd_soc_platform nuc900_soc_platform;
+
+#endif /*end _NUC900_AUDIO_H */
diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c
new file mode 100644
index 00000000000..e81e803b3a6
--- /dev/null
+++ b/sound/soc/nuc900/nuc900-pcm.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "nuc900-audio.h"
+
+static const struct snd_pcm_hardware nuc900_pcm_hardware = {
+	.info			= SNDRV_PCM_INFO_INTERLEAVED |
+					SNDRV_PCM_INFO_BLOCK_TRANSFER |
+					SNDRV_PCM_INFO_MMAP |
+					SNDRV_PCM_INFO_MMAP_VALID |
+					SNDRV_PCM_INFO_PAUSE |
+					SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
+	.channels_min		= 1,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 4*1024,
+	.period_bytes_min	= 1*1024,
+	.period_bytes_max	= 4*1024,
+	.periods_min		= 1,
+	.periods_max		= 1024,
+};
+
+static int nuc900_dma_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&nuc900_audio->lock, flags);
+
+	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
+	if (ret < 0)
+		return ret;
+
+	nuc900_audio->substream = substream;
+	nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
+	nuc900_audio->buffersize[substream->stream] =
+						params_buffer_bytes(params);
+
+	spin_unlock_irqrestore(&nuc900_audio->lock, flags);
+
+	return ret;
+}
+
+static void nuc900_update_dma_register(struct snd_pcm_substream *substream,
+				dma_addr_t dma_addr, size_t count)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+	void __iomem *mmio_addr, *mmio_len;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		mmio_addr = nuc900_audio->mmio + ACTL_PDSTB;
+		mmio_len = nuc900_audio->mmio + ACTL_PDST_LENGTH;
+	} else {
+		mmio_addr = nuc900_audio->mmio + ACTL_RDSTB;
+		mmio_len = nuc900_audio->mmio + ACTL_RDST_LENGTH;
+	}
+
+	AUDIO_WRITE(mmio_addr, dma_addr);
+	AUDIO_WRITE(mmio_len, count);
+}
+
+static void nuc900_dma_start(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+	unsigned long val;
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_CON);
+	val |= (T_DMA_IRQ | R_DMA_IRQ);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_CON, val);
+}
+
+static void nuc900_dma_stop(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+	unsigned long val;
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_CON);
+	val &= ~(T_DMA_IRQ | R_DMA_IRQ);
+	AUDIO_WRITE(nuc900_audio->mmio + ACTL_CON, val);
+}
+
+static irqreturn_t nuc900_dma_interrupt(int irq, void *dev_id)
+{
+	struct snd_pcm_substream *substream = dev_id;
+	struct nuc900_audio *nuc900_audio = substream->runtime->private_data;
+	unsigned long val;
+
+	spin_lock(&nuc900_audio->lock);
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_CON);
+
+	if (val & R_DMA_IRQ) {
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_CON, val | R_DMA_IRQ);
+
+		val = AUDIO_READ(nuc900_audio->mmio + ACTL_RSR);
+
+		if (val & R_DMA_MIDDLE_IRQ) {
+			val |= R_DMA_MIDDLE_IRQ;
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_RSR, val);
+		}
+
+		if (val & R_DMA_END_IRQ) {
+			val |= R_DMA_END_IRQ;
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_RSR, val);
+		}
+	} else if (val & T_DMA_IRQ) {
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_CON, val | T_DMA_IRQ);
+
+		val = AUDIO_READ(nuc900_audio->mmio + ACTL_PSR);
+
+		if (val & P_DMA_MIDDLE_IRQ) {
+			val |= P_DMA_MIDDLE_IRQ;
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_PSR, val);
+		}
+
+		if (val & P_DMA_END_IRQ) {
+			val |= P_DMA_END_IRQ;
+			AUDIO_WRITE(nuc900_audio->mmio + ACTL_PSR, val);
+		}
+	} else {
+		dev_err(nuc900_audio->dev, "Wrong DMA interrupt status!\n");
+		spin_unlock(&nuc900_audio->lock);
+		return IRQ_HANDLED;
+	}
+
+	spin_unlock(&nuc900_audio->lock);
+
+	snd_pcm_period_elapsed(substream);
+
+	return IRQ_HANDLED;
+}
+
+static int nuc900_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	snd_pcm_lib_free_pages(substream);
+	return 0;
+}
+
+static int nuc900_dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&nuc900_audio->lock, flags);
+
+	nuc900_update_dma_register(substream,
+				nuc900_audio->dma_addr[substream->stream],
+				nuc900_audio->buffersize[substream->stream]);
+
+	val = AUDIO_READ(nuc900_audio->mmio + ACTL_RESET);
+
+	switch (runtime->channels) {
+	case 1:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			val &= ~(PLAY_LEFT_CHNNEL | PLAY_RIGHT_CHNNEL);
+			val |= PLAY_RIGHT_CHNNEL;
+		} else {
+			val &= ~(RECORD_LEFT_CHNNEL | RECORD_RIGHT_CHNNEL);
+			val |= RECORD_RIGHT_CHNNEL;
+		}
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+		break;
+	case 2:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			val |= (PLAY_LEFT_CHNNEL | PLAY_RIGHT_CHNNEL);
+		else
+			val |= (RECORD_LEFT_CHNNEL | RECORD_RIGHT_CHNNEL);
+		AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
+		break;
+	default:
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&nuc900_audio->lock, flags);
+	return 0;
+}
+
+static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		nuc900_dma_start(substream);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		nuc900_dma_stop(substream);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+int nuc900_dma_getposition(struct snd_pcm_substream *substream,
+					dma_addr_t *src, dma_addr_t *dst)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+
+	if (src != NULL)
+		*src = AUDIO_READ(nuc900_audio->mmio + ACTL_PDSTC);
+
+	if (dst != NULL)
+		*dst = AUDIO_READ(nuc900_audio->mmio + ACTL_RDSTC);
+
+	return 0;
+}
+
+static snd_pcm_uframes_t nuc900_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	dma_addr_t src, dst;
+	unsigned long res;
+
+	nuc900_dma_getposition(substream, &src, &dst);
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		res = dst - runtime->dma_addr;
+	else
+		res = src - runtime->dma_addr;
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int nuc900_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio;
+
+	snd_soc_set_runtime_hwparams(substream, &nuc900_pcm_hardware);
+
+	nuc900_audio = nuc900_ac97_data;
+
+	if (request_irq(nuc900_audio->irq_num, nuc900_dma_interrupt,
+			IRQF_DISABLED, "nuc900-dma", substream))
+		return -EBUSY;
+
+	runtime->private_data = nuc900_audio;
+
+	return 0;
+}
+
+static int nuc900_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct nuc900_audio *nuc900_audio = runtime->private_data;
+
+	free_irq(nuc900_audio->irq_num, substream);
+
+	return 0;
+}
+
+static int nuc900_dma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+					runtime->dma_area,
+					runtime->dma_addr,
+					runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops nuc900_dma_ops = {
+	.open		= nuc900_dma_open,
+	.close		= nuc900_dma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= nuc900_dma_hw_params,
+	.hw_free	= nuc900_dma_hw_free,
+	.prepare	= nuc900_dma_prepare,
+	.trigger	= nuc900_dma_trigger,
+	.pointer	= nuc900_dma_pointer,
+	.mmap		= nuc900_dma_mmap,
+};
+
+static void nuc900_dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static u64 nuc900_pcm_dmamask = DMA_BIT_MASK(32);
+static int nuc900_dma_new(struct snd_card *card,
+	struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &nuc900_pcm_dmamask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
+
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+		card->dev, 4 * 1024, (4 * 1024) - 1);
+
+	return 0;
+}
+
+struct snd_soc_platform nuc900_soc_platform = {
+	.name		= "nuc900-dma",
+	.pcm_ops	= &nuc900_dma_ops,
+	.pcm_new	= nuc900_dma_new,
+	.pcm_free	= nuc900_dma_free_dma_buffers,
+}
+EXPORT_SYMBOL_GPL(nuc900_soc_platform);
+
+static int __init nuc900_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&nuc900_soc_platform);
+}
+
+static void __exit nuc900_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&nuc900_soc_platform);
+}
+
+module_init(nuc900_soc_platform_init);
+module_exit(nuc900_soc_platform_exit);
+
+MODULE_AUTHOR("Wan ZongShun, <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("nuc900 Audio DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 6f44cb4d30b..86f213905e2 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -59,6 +59,7 @@ struct omap_mcbsp_data {
 	int				configured;
 	unsigned int			in_freq;
 	int				clk_div;
+	int				wlen;
 };
 
 #define to_mcbsp(priv)	container_of((priv), struct omap_mcbsp_data, bus_id)
@@ -154,20 +155,51 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
+	struct omap_pcm_dma_data *dma_data;
 	int dma_op_mode = omap_mcbsp_get_dma_op_mode(mcbsp_data->bus_id);
-	int samples;
+	int words;
+
+	dma_data = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
 
 	/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
 	if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-		samples = snd_pcm_lib_period_bytes(substream) >> 1;
+		/*
+		 * Configure McBSP threshold based on either:
+		 * packet_size, when the sDMA is in packet mode, or
+		 * based on the period size.
+		 */
+		if (dma_data->packet_size)
+			words = dma_data->packet_size;
+		else
+			words = snd_pcm_lib_period_bytes(substream) /
+							(mcbsp_data->wlen / 8);
 	else
-		samples = 1;
+		words = 1;
 
 	/* Configure McBSP internal buffer usage */
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, samples - 1);
+		omap_mcbsp_set_tx_threshold(mcbsp_data->bus_id, words);
 	else
-		omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, samples - 1);
+		omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, words);
+}
+
+static int omap_mcbsp_hwrule_min_buffersize(struct snd_pcm_hw_params *params,
+				    struct snd_pcm_hw_rule *rule)
+{
+	struct snd_interval *buffer_size = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_BUFFER_SIZE);
+	struct snd_interval *channels = hw_param_interval(params,
+					SNDRV_PCM_HW_PARAM_CHANNELS);
+	struct omap_mcbsp_data *mcbsp_data = rule->private;
+	struct snd_interval frames;
+	int size;
+
+	snd_interval_any(&frames);
+	size = omap_mcbsp_get_fifo_size(mcbsp_data->bus_id);
+
+	frames.min = size / channels->min;
+	frames.integer = 1;
+	return snd_interval_refine(buffer_size, &frames);
 }
 
 static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
@@ -182,33 +214,35 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 	if (!cpu_dai->active)
 		err = omap_mcbsp_request(bus_id);
 
+	/*
+	 * OMAP3 McBSP FIFO is word structured.
+	 * McBSP2 has 1024 + 256 = 1280 word long buffer,
+	 * McBSP1,3,4,5 has 128 word long buffer
+	 * This means that the size of the FIFO depends on the sample format.
+	 * For example on McBSP3:
+	 * 16bit samples: size is 128 * 2 = 256 bytes
+	 * 32bit samples: size is 128 * 4 = 512 bytes
+	 * It is simpler to place constraint for buffer and period based on
+	 * channels.
+	 * McBSP3 as example again (16 or 32 bit samples):
+	 * 1 channel (mono): size is 128 frames (128 words)
+	 * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words)
+	 * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
+	 */
 	if (cpu_is_omap343x()) {
-		int dma_op_mode = omap_mcbsp_get_dma_op_mode(bus_id);
-		int max_period;
-
 		/*
-		 * McBSP2 in OMAP3 has 1024 * 32-bit internal audio buffer.
-		 * Set constraint for minimum buffer size to the same than FIFO
-		 * size in order to avoid underruns in playback startup because
-		 * HW is keeping the DMA request active until FIFO is filled.
-		 */
-		if (bus_id == 1)
-			snd_pcm_hw_constraint_minmax(substream->runtime,
-					SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
-					4096, UINT_MAX);
-
-		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-			max_period = omap_mcbsp_get_max_tx_threshold(bus_id);
-		else
-			max_period = omap_mcbsp_get_max_rx_threshold(bus_id);
-
-		max_period++;
-		max_period <<= 1;
-
-		if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-			snd_pcm_hw_constraint_minmax(substream->runtime,
-						SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
-						32, max_period);
+		* Rule for the buffer size. We should not allow
+		* smaller buffer than the FIFO size to avoid underruns
+		*/
+		snd_pcm_hw_rule_add(substream->runtime, 0,
+				    SNDRV_PCM_HW_PARAM_CHANNELS,
+				    omap_mcbsp_hwrule_min_buffersize,
+				    mcbsp_data,
+				    SNDRV_PCM_HW_PARAM_BUFFER_SIZE, -1);
+
+		/* Make sure, that the period size is always even */
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE, 2);
 	}
 
 	return err;
@@ -289,11 +323,14 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
-	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
+	struct omap_pcm_dma_data *dma_data;
+	int dma, bus_id = mcbsp_data->bus_id;
 	int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
+	int pkt_size = 0;
 	unsigned long port;
 	unsigned int format, div, framesize, master;
 
+	dma_data = &omap_mcbsp_dai_dma_params[cpu_dai->id][substream->stream];
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
 		port = omap1_mcbsp_port[bus_id][substream->stream];
@@ -306,35 +343,74 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	} else if (cpu_is_omap343x()) {
 		dma = omap24xx_dma_reqs[bus_id][substream->stream];
 		port = omap34xx_mcbsp_port[bus_id][substream->stream];
-		omap_mcbsp_dai_dma_params[id][substream->stream].set_threshold =
-						omap_mcbsp_set_threshold;
-		/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
-		if (omap_mcbsp_get_dma_op_mode(bus_id) ==
-						MCBSP_DMA_MODE_THRESHOLD)
-			sync_mode = OMAP_DMA_SYNC_FRAME;
 	} else {
 		return -ENODEV;
 	}
-	omap_mcbsp_dai_dma_params[id][substream->stream].name =
-		substream->stream ? "Audio Capture" : "Audio Playback";
-	omap_mcbsp_dai_dma_params[id][substream->stream].dma_req = dma;
-	omap_mcbsp_dai_dma_params[id][substream->stream].port_addr = port;
-	omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
-		omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
-			 OMAP_DMA_DATA_TYPE_S16;
+		dma_data->data_type = OMAP_DMA_DATA_TYPE_S16;
+		wlen = 16;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
-		omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
-			 OMAP_DMA_DATA_TYPE_S32;
+		dma_data->data_type = OMAP_DMA_DATA_TYPE_S32;
+		wlen = 32;
 		break;
 	default:
 		return -EINVAL;
 	}
+	if (cpu_is_omap343x()) {
+		dma_data->set_threshold = omap_mcbsp_set_threshold;
+		/* TODO: Currently, MODE_ELEMENT == MODE_FRAME */
+		if (omap_mcbsp_get_dma_op_mode(bus_id) ==
+						MCBSP_DMA_MODE_THRESHOLD) {
+			int period_words, max_thrsh;
+
+			period_words = params_period_bytes(params) / (wlen / 8);
+			if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+				max_thrsh = omap_mcbsp_get_max_tx_threshold(
+							    mcbsp_data->bus_id);
+			else
+				max_thrsh = omap_mcbsp_get_max_rx_threshold(
+							    mcbsp_data->bus_id);
+			/*
+			 * If the period contains less or equal number of words,
+			 * we are using the original threshold mode setup:
+			 * McBSP threshold = sDMA frame size = period_size
+			 * Otherwise we switch to sDMA packet mode:
+			 * McBSP threshold = sDMA packet size
+			 * sDMA frame size = period size
+			 */
+			if (period_words > max_thrsh) {
+				int divider = 0;
+
+				/*
+				 * Look for the biggest threshold value, which
+				 * divides the period size evenly.
+				 */
+				divider = period_words / max_thrsh;
+				if (period_words % max_thrsh)
+					divider++;
+				while (period_words % divider &&
+					divider < period_words)
+					divider++;
+				if (divider == period_words)
+					return -EINVAL;
+
+				pkt_size = period_words / divider;
+				sync_mode = OMAP_DMA_SYNC_PACKET;
+			} else {
+				sync_mode = OMAP_DMA_SYNC_FRAME;
+			}
+		}
+	}
 
-	snd_soc_dai_set_dma_data(cpu_dai, substream,
-		&omap_mcbsp_dai_dma_params[id][substream->stream]);
+	dma_data->name = substream->stream ? "Audio Capture" : "Audio Playback";
+	dma_data->dma_req = dma;
+	dma_data->port_addr = port;
+	dma_data->sync_mode = sync_mode;
+	dma_data->packet_size = pkt_size;
+
+	snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
 
 	if (mcbsp_data->configured) {
 		/* McBSP already configured by another stream */
@@ -360,7 +436,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		/* Set word lengths */
-		wlen = 16;
 		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_16);
 		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_16);
 		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_16);
@@ -368,7 +443,6 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
 		/* Set word lengths */
-		wlen = 32;
 		regs->rcr2	|= RWDLEN2(OMAP_MCBSP_WORD_32);
 		regs->rcr1	|= RWDLEN1(OMAP_MCBSP_WORD_32);
 		regs->xcr2	|= XWDLEN2(OMAP_MCBSP_WORD_32);
@@ -409,6 +483,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	}
 
 	omap_mcbsp_config(bus_id, &mcbsp_data->regs);
+	mcbsp_data->wlen = wlen;
 	mcbsp_data->configured = 1;
 
 	return 0;
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 87ce842fa2e..9eecac135bb 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -43,12 +43,14 @@
 
 static struct regulator *omap3pandora_dac_reg;
 
-static int omap3pandora_cmn_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params, unsigned int fmt)
+static int omap3pandora_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+		  SND_SOC_DAIFMT_CBS_CFS;
 	int ret;
 
 	/* Set codec DAI configuration */
@@ -91,24 +93,6 @@ static int omap3pandora_cmn_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static int omap3pandora_out_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	return omap3pandora_cmn_hw_params(substream, params,
-					  SND_SOC_DAIFMT_I2S |
-					  SND_SOC_DAIFMT_IB_NF |
-					  SND_SOC_DAIFMT_CBS_CFS);
-}
-
-static int omap3pandora_in_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	return omap3pandora_cmn_hw_params(substream, params,
-					  SND_SOC_DAIFMT_I2S |
-					  SND_SOC_DAIFMT_NB_NF |
-					  SND_SOC_DAIFMT_CBS_CFS);
-}
-
 static int omap3pandora_dac_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *k, int event)
 {
@@ -231,12 +215,8 @@ static int omap3pandora_in_init(struct snd_soc_codec *codec)
 	return snd_soc_dapm_sync(codec);
 }
 
-static struct snd_soc_ops omap3pandora_out_ops = {
-	.hw_params = omap3pandora_out_hw_params,
-};
-
-static struct snd_soc_ops omap3pandora_in_ops = {
-	.hw_params = omap3pandora_in_hw_params,
+static struct snd_soc_ops omap3pandora_ops = {
+	.hw_params = omap3pandora_hw_params,
 };
 
 /* Digital audio interface glue - connects codec <--> CPU */
@@ -246,14 +226,14 @@ static struct snd_soc_dai_link omap3pandora_dai[] = {
 		.stream_name = "HiFi Out",
 		.cpu_dai = &omap_mcbsp_dai[0],
 		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
-		.ops = &omap3pandora_out_ops,
+		.ops = &omap3pandora_ops,
 		.init = omap3pandora_out_init,
 	}, {
 		.name = "TWL4030",
 		.stream_name = "Line/Mic In",
 		.cpu_dai = &omap_mcbsp_dai[1],
 		.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
-		.ops = &omap3pandora_in_ops,
+		.ops = &omap3pandora_ops,
 		.init = omap3pandora_in_init,
 	}
 };
diff --git a/sound/soc/omap/rx51.c b/sound/soc/omap/rx51.c
index 47d831ef2db..88052d29617 100644
--- a/sound/soc/omap/rx51.c
+++ b/sound/soc/omap/rx51.c
@@ -27,6 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <sound/core.h>
+#include <sound/jack.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
@@ -37,14 +38,22 @@
 #include "omap-pcm.h"
 #include "../codecs/tlv320aic3x.h"
 
+#define RX51_TVOUT_SEL_GPIO		40
+#define RX51_JACK_DETECT_GPIO		177
 /*
  * REVISIT: TWL4030 GPIO base in RX-51. Now statically defined to 192. This
  * gpio is reserved in arch/arm/mach-omap2/board-rx51-peripherals.c
  */
 #define RX51_SPEAKER_AMP_TWL_GPIO	(192 + 7)
 
+enum {
+	RX51_JACK_DISABLED,
+	RX51_JACK_TVOUT,		/* tv-out */
+};
+
 static int rx51_spk_func;
 static int rx51_dmic_func;
+static int rx51_jack_func;
 
 static void rx51_ext_control(struct snd_soc_codec *codec)
 {
@@ -57,6 +66,9 @@ static void rx51_ext_control(struct snd_soc_codec *codec)
 	else
 		snd_soc_dapm_disable_pin(codec, "DMic");
 
+	gpio_set_value(RX51_TVOUT_SEL_GPIO,
+		       rx51_jack_func == RX51_JACK_TVOUT);
+
 	snd_soc_dapm_sync(codec);
 }
 
@@ -162,6 +174,40 @@ static int rx51_set_input(struct snd_kcontrol *kcontrol,
 	return 1;
 }
 
+static int rx51_get_jack(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = rx51_jack_func;
+
+	return 0;
+}
+
+static int rx51_set_jack(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+	if (rx51_jack_func == ucontrol->value.integer.value[0])
+		return 0;
+
+	rx51_jack_func = ucontrol->value.integer.value[0];
+	rx51_ext_control(codec);
+
+	return 1;
+}
+
+static struct snd_soc_jack rx51_av_jack;
+
+static struct snd_soc_jack_gpio rx51_av_jack_gpios[] = {
+	{
+		.gpio = RX51_JACK_DETECT_GPIO,
+		.name = "avdet-gpio",
+		.report = SND_JACK_VIDEOOUT,
+		.invert = 1,
+		.debounce_time = 200,
+	},
+};
+
 static const struct snd_soc_dapm_widget aic34_dapm_widgets[] = {
 	SND_SOC_DAPM_SPK("Ext Spk", rx51_spk_event),
 	SND_SOC_DAPM_MIC("DMic", NULL),
@@ -177,10 +223,12 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 static const char *spk_function[] = {"Off", "On"};
 static const char *input_function[] = {"ADC", "Digital Mic"};
+static const char *jack_function[] = {"Off", "TV-OUT"};
 
 static const struct soc_enum rx51_enum[] = {
 	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function),
 	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(input_function), input_function),
+	SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(jack_function), jack_function),
 };
 
 static const struct snd_kcontrol_new aic34_rx51_controls[] = {
@@ -188,10 +236,13 @@ static const struct snd_kcontrol_new aic34_rx51_controls[] = {
 		     rx51_get_spk, rx51_set_spk),
 	SOC_ENUM_EXT("Input Select",  rx51_enum[1],
 		     rx51_get_input, rx51_set_input),
+	SOC_ENUM_EXT("Jack Function", rx51_enum[2],
+		     rx51_get_jack, rx51_set_jack),
 };
 
 static int rx51_aic34_init(struct snd_soc_codec *codec)
 {
+	struct snd_soc_card *card = codec->socdev->card;
 	int err;
 
 	/* Set up NC codec pins */
@@ -214,7 +265,16 @@ static int rx51_aic34_init(struct snd_soc_codec *codec)
 
 	snd_soc_dapm_sync(codec);
 
-	return 0;
+	/* AV jack detection */
+	err = snd_soc_jack_new(card, "AV Jack",
+			       SND_JACK_VIDEOOUT, &rx51_av_jack);
+	if (err)
+		return err;
+	err = snd_soc_jack_add_gpios(&rx51_av_jack,
+				     ARRAY_SIZE(rx51_av_jack_gpios),
+				     rx51_av_jack_gpios);
+
+	return err;
 }
 
 /* Digital audio interface glue - connects codec <--> CPU */
@@ -259,6 +319,11 @@ static int __init rx51_soc_init(void)
 	if (!machine_is_nokia_rx51())
 		return -ENODEV;
 
+	err = gpio_request(RX51_TVOUT_SEL_GPIO, "tvout_sel");
+	if (err)
+		goto err_gpio_tvout_sel;
+	gpio_direction_output(RX51_TVOUT_SEL_GPIO, 0);
+
 	rx51_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!rx51_snd_device) {
 		err = -ENOMEM;
@@ -277,13 +342,19 @@ static int __init rx51_soc_init(void)
 err2:
 	platform_device_put(rx51_snd_device);
 err1:
+	gpio_free(RX51_TVOUT_SEL_GPIO);
+err_gpio_tvout_sel:
 
 	return err;
 }
 
 static void __exit rx51_soc_exit(void)
 {
+	snd_soc_jack_free_gpios(&rx51_av_jack, ARRAY_SIZE(rx51_av_jack_gpios),
+				rx51_av_jack_gpios);
+
 	platform_device_unregister(rx51_snd_device);
+	gpio_free(RX51_TVOUT_SEL_GPIO);
 }
 
 module_init(rx51_soc_init);
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 2a7cc222d09..213963ac3c2 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -1,6 +1,6 @@
 config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
 	select S3C64XX_DMA if ARCH_S3C64XX
 	help
 	  Say Y or M if you want to add support for codecs attached to
@@ -120,8 +120,14 @@ config SND_S3C24XX_SOC_SIMTEC_HERMES
 
 config SND_SOC_SMDK_WM9713
 	tristate "SoC AC97 Audio support for SMDK with WM9713"
-	depends on SND_S3C24XX_SOC && MACH_SMDK6410
+	depends on SND_S3C24XX_SOC && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDKV210 || MACH_SMDKC110)
 	select SND_SOC_WM9713
 	select SND_S3C_SOC_AC97
 	help
 	  Sat Y if you want to add support for SoC audio on the SMDK.
+
+config SND_S3C64XX_SOC_SMARTQ
+	tristate "SoC I2S Audio support for SmartQ board"
+	depends on SND_S3C24XX_SOC && MACH_SMARTQ
+	select SND_S3C64XX_SOC_I2S
+	select SND_SOC_WM8750
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 81d8dc503f8..50172c385d9 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -29,6 +29,7 @@ snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
 snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
 snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
 snd-soc-smdk-wm9713-objs := smdk_wm9713.o
+snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -41,3 +42,4 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
 obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
 obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o
+obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
diff --git a/sound/soc/s3c24xx/s3c-ac97.c b/sound/soc/s3c24xx/s3c-ac97.c
index ecf4fd04ae9..31f6d45b638 100644
--- a/sound/soc/s3c24xx/s3c-ac97.c
+++ b/sound/soc/s3c24xx/s3c-ac97.c
@@ -31,7 +31,6 @@
 #define AC_CMD_DATA(x) (x & 0xffff)
 
 struct s3c_ac97_info {
-	unsigned           state;
 	struct clk         *ac97_clk;
 	void __iomem	   *regs;
 	struct mutex       lock;
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 13311c8cf96..64376b2aac7 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -32,7 +32,8 @@
 
 #undef S3C_IIS_V2_SUPPORTED
 
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
+	|| defined(CONFIG_CPU_S5PV210)
 #define S3C_IIS_V2_SUPPORTED
 #endif
 
diff --git a/sound/soc/s3c24xx/smartq_wm8987.c b/sound/soc/s3c24xx/smartq_wm8987.c
new file mode 100644
index 00000000000..b480348140b
--- /dev/null
+++ b/sound/soc/s3c24xx/smartq_wm8987.c
@@ -0,0 +1,295 @@
+/* sound/soc/s3c24xx/smartq_wm8987.c
+ *
+ * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * Based on smdk6410_wm8987.c
+ *     Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
+ *     Graeme Gregory - graeme.gregory@wolfsonmicro.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include "s3c-dma.h"
+#include "s3c64xx-i2s.h"
+
+#include "../codecs/wm8750.h"
+
+/*
+ * WM8987 is register compatible with WM8750, so using that as base driver.
+ */
+
+static struct snd_soc_card snd_soc_smartq;
+
+static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct s3c_i2sv2_rate_calc div;
+	unsigned int clk = 0;
+	int ret;
+
+	s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+				s3c_i2sv2_get_clock(cpu_dai));
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 32000:
+	case 48000:
+	case 96000:
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		clk = 11289600;
+		break;
+	}
+
+	/* set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+					     SND_SOC_DAIFMT_NB_NF |
+					     SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+					   SND_SOC_DAIFMT_NB_NF |
+					   SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* set MCLK division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, div.fs_div);
+	if (ret < 0)
+		return ret;
+
+	/* set prescaler division for sample rate */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_PRESCALER,
+				     div.clk_div - 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SmartQ WM8987 HiFi DAI operations.
+ */
+static struct snd_soc_ops smartq_hifi_ops = {
+	.hw_params = smartq_hifi_hw_params,
+};
+
+static struct snd_soc_jack smartq_jack;
+
+static struct snd_soc_jack_pin smartq_jack_pins[] = {
+	/* Disable speaker when headphone is plugged in */
+	{
+		.pin	= "Internal Speaker",
+		.mask	= SND_JACK_HEADPHONE,
+	},
+};
+
+static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
+	{
+		.gpio		= S3C64XX_GPL(12),
+		.name		= "headphone detect",
+		.report		= SND_JACK_HEADPHONE,
+		.debounce_time	= 200,
+	},
+};
+
+static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Internal Speaker"),
+	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
+	SOC_DAPM_PIN_SWITCH("Internal Mic"),
+};
+
+static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
+				struct snd_kcontrol *k,
+				int event)
+{
+	gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_MIC("Internal Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"Headphone Jack", NULL, "LOUT2"},
+	{"Headphone Jack", NULL, "ROUT2"},
+
+	{"Internal Speaker", NULL, "LOUT2"},
+	{"Internal Speaker", NULL, "ROUT2"},
+
+	{"Mic Bias", NULL, "Internal Mic"},
+	{"LINPUT2", NULL, "Mic Bias"},
+};
+
+static int smartq_wm8987_init(struct snd_soc_codec *codec)
+{
+	int err = 0;
+
+	/* Add SmartQ specific widgets */
+	snd_soc_dapm_new_controls(codec, wm8987_dapm_widgets,
+				  ARRAY_SIZE(wm8987_dapm_widgets));
+
+	/* add SmartQ specific controls */
+	err = snd_soc_add_controls(codec, wm8987_smartq_controls,
+				   ARRAY_SIZE(wm8987_smartq_controls));
+
+	if (err < 0)
+		return err;
+
+	/* setup SmartQ specific audio path */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* set endpoints to not connected */
+	snd_soc_dapm_nc_pin(codec, "LINPUT1");
+	snd_soc_dapm_nc_pin(codec, "RINPUT1");
+	snd_soc_dapm_nc_pin(codec, "OUT3");
+	snd_soc_dapm_nc_pin(codec, "ROUT1");
+
+	/* set endpoints to default off mode */
+	snd_soc_dapm_enable_pin(codec, "Internal Speaker");
+	snd_soc_dapm_enable_pin(codec, "Internal Mic");
+	snd_soc_dapm_disable_pin(codec, "Headphone Jack");
+
+	err = snd_soc_dapm_sync(codec);
+	if (err)
+		return err;
+
+	/* Headphone jack detection */
+	err = snd_soc_jack_new(&snd_soc_smartq, "Headphone Jack",
+			       SND_JACK_HEADPHONE, &smartq_jack);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
+				    smartq_jack_pins);
+	if (err)
+		return err;
+
+	err = snd_soc_jack_add_gpios(&smartq_jack,
+				     ARRAY_SIZE(smartq_jack_gpios),
+				     smartq_jack_gpios);
+
+	return err;
+}
+
+static struct snd_soc_dai_link smartq_dai[] = {
+	{
+		.name		= "wm8987",
+		.stream_name	= "SmartQ Hi-Fi",
+		.cpu_dai	= &s3c64xx_i2s_dai[0],
+		.codec_dai	= &wm8750_dai,
+		.init		= smartq_wm8987_init,
+		.ops		= &smartq_hifi_ops,
+	},
+};
+
+static struct snd_soc_card snd_soc_smartq = {
+	.name = "SmartQ",
+	.platform = &s3c24xx_soc_platform,
+	.dai_link = smartq_dai,
+	.num_links = ARRAY_SIZE(smartq_dai),
+};
+
+static struct snd_soc_device smartq_snd_devdata = {
+	.card = &snd_soc_smartq,
+	.codec_dev = &soc_codec_dev_wm8750,
+};
+
+static struct platform_device *smartq_snd_device;
+
+static int __init smartq_init(void)
+{
+	int ret;
+
+	if (!machine_is_smartq7() && !machine_is_smartq5()) {
+		pr_info("Only SmartQ is supported by this ASoC driver\n");
+		return -ENODEV;
+	}
+
+	smartq_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smartq_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smartq_snd_device, &smartq_snd_devdata);
+	smartq_snd_devdata.dev = &smartq_snd_device->dev;
+
+	ret = platform_device_add(smartq_snd_device);
+	if (ret) {
+		platform_device_put(smartq_snd_device);
+		return ret;
+	}
+
+	/* Initialise GPIOs used by amplifiers */
+	ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
+		goto err_unregister_device;
+	}
+
+	/* Disable amplifiers */
+	ret = gpio_direction_output(S3C64XX_GPK(12), 1);
+	if (ret) {
+		dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
+		goto err_free_gpio_amp_shut;
+	}
+
+	return 0;
+
+err_free_gpio_amp_shut:
+	gpio_free(S3C64XX_GPK(12));
+err_unregister_device:
+	platform_device_unregister(smartq_snd_device);
+
+	return ret;
+}
+
+static void __exit smartq_exit(void)
+{
+	snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
+				smartq_jack_gpios);
+
+	platform_device_unregister(smartq_snd_device);
+}
+
+module_init(smartq_init);
+module_exit(smartq_exit);
+
+/* Module information */
+MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/smdk_wm9713.c b/sound/soc/s3c24xx/smdk_wm9713.c
index 24fd39f38cc..5527b9e88c9 100644
--- a/sound/soc/s3c24xx/smdk_wm9713.c
+++ b/sound/soc/s3c24xx/smdk_wm9713.c
@@ -25,6 +25,9 @@ static struct snd_soc_card smdk;
  * Default CFG switch settings to use this driver:
  *
  *   SMDK6410: Set CFG1 1-3 On, CFG2 1-4 Off
+ *   SMDKC100: Set CFG6 1-3 On, CFG7 1   On
+ *   SMDKC110: Set CFGB10 1-2 Off, CFGB12 1-3 On
+ *   SMDKV210: Set CFGB10 1-2 Off, CFGB12 1-3 On
  */
 
 /*
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 5b9ac1759bd..59e3fa7bcb0 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -451,16 +451,15 @@ static int __devinit s6000_i2s_probe(struct platform_device *pdev)
 		goto err_release_none;
 	}
 
-	region = request_mem_region(scbmem->start,
-				    scbmem->end - scbmem->start + 1,
-				    pdev->name);
+	region = request_mem_region(scbmem->start, resource_size(scbmem),
+								pdev->name);
 	if (!region) {
 		dev_err(&pdev->dev, "I2S SCB region already claimed\n");
 		ret = -EBUSY;
 		goto err_release_none;
 	}
 
-	mmio = ioremap(scbmem->start, scbmem->end - scbmem->start + 1);
+	mmio = ioremap(scbmem->start, resource_size(scbmem));
 	if (!mmio) {
 		dev_err(&pdev->dev, "can't ioremap SCB region\n");
 		ret = -ENOMEM;
@@ -474,9 +473,8 @@ static int __devinit s6000_i2s_probe(struct platform_device *pdev)
 		goto err_release_map;
 	}
 
-	region = request_mem_region(sifmem->start,
-				    sifmem->end - sifmem->start + 1,
-				    pdev->name);
+	region = request_mem_region(sifmem->start, resource_size(sifmem),
+								pdev->name);
 	if (!region) {
 		dev_err(&pdev->dev, "I2S SIF region already claimed\n");
 		ret = -EBUSY;
@@ -490,8 +488,8 @@ static int __devinit s6000_i2s_probe(struct platform_device *pdev)
 		goto err_release_sif;
 	}
 
-	region = request_mem_region(dma1->start, dma1->end - dma1->start + 1,
-				    pdev->name);
+	region = request_mem_region(dma1->start, resource_size(dma1),
+								pdev->name);
 	if (!region) {
 		dev_err(&pdev->dev, "I2S DMA region already claimed\n");
 		ret = -EBUSY;
@@ -500,9 +498,8 @@ static int __devinit s6000_i2s_probe(struct platform_device *pdev)
 
 	dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (dma2) {
-		region = request_mem_region(dma2->start,
-					    dma2->end - dma2->start + 1,
-					    pdev->name);
+		region = request_mem_region(dma2->start, resource_size(dma2),
+								pdev->name);
 		if (!region) {
 			dev_err(&pdev->dev,
 				"I2S DMA region already claimed\n");
@@ -561,15 +558,15 @@ err_release_dev:
 	kfree(dev);
 err_release_dma2:
 	if (dma2)
-		release_mem_region(dma2->start, dma2->end - dma2->start + 1);
+		release_mem_region(dma2->start, resource_size(dma2));
 err_release_dma1:
-	release_mem_region(dma1->start, dma1->end - dma1->start + 1);
+	release_mem_region(dma1->start, resource_size(dma1));
 err_release_sif:
-	release_mem_region(sifmem->start, (sifmem->end - sifmem->start) + 1);
+	release_mem_region(sifmem->start, resource_size(sifmem));
 err_release_map:
 	iounmap(mmio);
 err_release_scb:
-	release_mem_region(scbmem->start, (scbmem->end - scbmem->start) + 1);
+	release_mem_region(scbmem->start, resource_size(scbmem));
 err_release_none:
 	return ret;
 }
@@ -590,19 +587,18 @@ static void __devexit s6000_i2s_remove(struct platform_device *pdev)
 	kfree(dev);
 
 	region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	release_mem_region(region->start, region->end - region->start + 1);
+	release_mem_region(region->start, resource_size(region));
 
 	region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (region)
-		release_mem_region(region->start,
-				   region->end - region->start + 1);
+		release_mem_region(region->start, resource_size(region));
 
 	region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(region->start, (region->end - region->start) + 1);
+	release_mem_region(region->start, resource_size(region));
 
 	iounmap(mmio);
 	region = platform_get_resource(pdev, IORESOURCE_IO, 0);
-	release_mem_region(region->start, (region->end - region->start) + 1);
+	release_mem_region(region->start, resource_size(region));
 }
 
 static struct platform_driver s6000_i2s_driver = {
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index a1d14bc3c76..52d7e8ed9c1 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -48,7 +48,7 @@ config SND_SH7760_AC97
 
 config SND_FSI_AK4642
 	bool "FSI-AK4642 sound support"
-	depends on SND_SOC_SH4_FSI
+	depends on SND_SOC_SH4_FSI && I2C_SH_MOBILE
 	select SND_SOC_AK4642
 	help
 	  This option enables generic sound support for the
@@ -56,7 +56,7 @@ config SND_FSI_AK4642
 
 config SND_FSI_DA7210
 	bool "FSI-DA7210 sound support"
-	depends on SND_SOC_SH4_FSI
+	depends on SND_SOC_SH4_FSI && I2C_SH_MOBILE
 	select SND_SOC_DA7210
 	help
 	  This option enables generic sound support for the
diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c
index be018542314..dad575a2262 100644
--- a/sound/soc/sh/fsi-ak4642.c
+++ b/sound/soc/sh/fsi-ak4642.c
@@ -9,16 +9,7 @@
  * for more details.
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
 #include <sound/sh_fsi.h>
 #include <../sound/soc/codecs/ak4642.h>
 
@@ -38,7 +29,7 @@ static int fsi_ak4642_dai_init(struct snd_soc_codec *codec)
 static struct snd_soc_dai_link fsi_dai_link = {
 	.name		= "AK4642",
 	.stream_name	= "AK4642",
-	.cpu_dai	= &fsi_soc_dai[0], /* fsi */
+	.cpu_dai	= &fsi_soc_dai[FSI_PORT_A],
 	.codec_dai	= &ak4642_dai,
 	.init		= fsi_ak4642_dai_init,
 	.ops		= NULL,
@@ -62,7 +53,7 @@ static int __init fsi_ak4642_init(void)
 {
 	int ret = -ENOMEM;
 
-	fsi_snd_device = platform_device_alloc("soc-audio", -1);
+	fsi_snd_device = platform_device_alloc("soc-audio", FSI_PORT_A);
 	if (!fsi_snd_device)
 		goto out;
 
diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c
index 33b4d177f46..121bbb07bb0 100644
--- a/sound/soc/sh/fsi-da7210.c
+++ b/sound/soc/sh/fsi-da7210.c
@@ -10,16 +10,7 @@
  *  option) any later version.
  */
 
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
 #include <sound/sh_fsi.h>
 #include "../codecs/da7210.h"
 
@@ -33,7 +24,7 @@ static int fsi_da7210_init(struct snd_soc_codec *codec)
 static struct snd_soc_dai_link fsi_da7210_dai = {
 	.name		= "DA7210",
 	.stream_name	= "DA7210",
-	.cpu_dai	= &fsi_soc_dai[1], /* FSI B */
+	.cpu_dai	= &fsi_soc_dai[FSI_PORT_B],
 	.codec_dai	= &da7210_dai,
 	.init		= fsi_da7210_init,
 };
@@ -56,7 +47,7 @@ static int __init fsi_da7210_sound_init(void)
 {
 	int ret;
 
-	fsi_da7210_snd_device = platform_device_alloc("soc-audio", -1);
+	fsi_da7210_snd_device = platform_device_alloc("soc-audio", FSI_PORT_B);
 	if (!fsi_da7210_snd_device)
 		return -ENOMEM;
 
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index ec4acac49eb..58c6bec642d 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -12,21 +12,12 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/list.h>
 #include <linux/pm_runtime.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/initval.h>
 #include <sound/soc.h>
-#include <sound/pcm_params.h>
 #include <sound/sh_fsi.h>
-#include <asm/atomic.h>
 
 #define DO_FMT		0x0000
 #define DOFF_CTL	0x0004
@@ -39,9 +30,11 @@
 #define DIDT		0x0020
 #define DODT		0x0024
 #define MUTE_ST		0x0028
-#define REG_END		MUTE_ST
-
+#define OUT_SEL		0x0030
+#define REG_END		OUT_SEL
 
+#define A_MST_CTLR	0x0180
+#define B_MST_CTLR	0x01A0
 #define CPU_INT_ST	0x01F4
 #define CPU_IEMSK	0x01F8
 #define CPU_IMSK	0x01FC
@@ -52,18 +45,18 @@
 #define CLK_RST		0x0210
 #define SOFT_RST	0x0214
 #define FIFO_SZ		0x0218
-#define MREG_START	CPU_INT_ST
+#define MREG_START	A_MST_CTLR
 #define MREG_END	FIFO_SZ
 
 /* DO_FMT */
 /* DI_FMT */
-#define CR_FMT(param) ((param) << 4)
-# define CR_MONO	0x0
-# define CR_MONO_D	0x1
-# define CR_PCM		0x2
-# define CR_I2S		0x3
-# define CR_TDM		0x4
-# define CR_TDM_D	0x5
+#define CR_MONO		(0x0 << 4)
+#define CR_MONO_D	(0x1 << 4)
+#define CR_PCM		(0x2 << 4)
+#define CR_I2S		(0x3 << 4)
+#define CR_TDM		(0x4 << 4)
+#define CR_TDM_D	(0x5 << 4)
+#define CR_SPDIF	0x00100120
 
 /* DOFF_CTL */
 /* DIFF_CTL */
@@ -75,6 +68,14 @@
 #define ERR_UNDER	0x00000001
 #define ST_ERR		(ERR_OVER | ERR_UNDER)
 
+/* CKG1 */
+#define ACKMD_MASK	0x00007000
+#define BPFMD_MASK	0x00000700
+
+/* A/B MST_CTLR */
+#define BP	(1 << 4)	/* Fix the signal of Biphase output */
+#define SE	(1 << 0)	/* Fix the master clock */
+
 /* CLK_RST */
 #define B_CLK		0x00000010
 #define A_CLK		0x00000001
@@ -119,9 +120,13 @@ struct fsi_priv {
 	int period_len;
 	int buffer_len;
 	int periods;
+
+	u32 mst_ctrl;
 };
 
-struct fsi_regs {
+struct fsi_core {
+	int ver;
+
 	u32 int_st;
 	u32 iemsk;
 	u32 imsk;
@@ -132,7 +137,7 @@ struct fsi_master {
 	int irq;
 	struct fsi_priv fsia;
 	struct fsi_priv fsib;
-	struct fsi_regs *regs;
+	struct fsi_core *core;
 	struct sh_fsi_platform_info *info;
 	spinlock_t lock;
 };
@@ -169,24 +174,30 @@ static void __fsi_reg_mask_set(u32 reg, u32 mask, u32 data)
 
 static void fsi_reg_write(struct fsi_priv *fsi, u32 reg, u32 data)
 {
-	if (reg > REG_END)
+	if (reg > REG_END) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return;
+	}
 
 	__fsi_reg_write((u32)(fsi->base + reg), data);
 }
 
 static u32 fsi_reg_read(struct fsi_priv *fsi, u32 reg)
 {
-	if (reg > REG_END)
+	if (reg > REG_END) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return 0;
+	}
 
 	return __fsi_reg_read((u32)(fsi->base + reg));
 }
 
 static void fsi_reg_mask_set(struct fsi_priv *fsi, u32 reg, u32 mask, u32 data)
 {
-	if (reg > REG_END)
+	if (reg > REG_END) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return;
+	}
 
 	__fsi_reg_mask_set((u32)(fsi->base + reg), mask, data);
 }
@@ -196,8 +207,10 @@ static void fsi_master_write(struct fsi_master *master, u32 reg, u32 data)
 	unsigned long flags;
 
 	if ((reg < MREG_START) ||
-	    (reg > MREG_END))
+	    (reg > MREG_END)) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return;
+	}
 
 	spin_lock_irqsave(&master->lock, flags);
 	__fsi_reg_write((u32)(master->base + reg), data);
@@ -210,8 +223,10 @@ static u32 fsi_master_read(struct fsi_master *master, u32 reg)
 	unsigned long flags;
 
 	if ((reg < MREG_START) ||
-	    (reg > MREG_END))
+	    (reg > MREG_END)) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return 0;
+	}
 
 	spin_lock_irqsave(&master->lock, flags);
 	ret = __fsi_reg_read((u32)(master->base + reg));
@@ -226,8 +241,10 @@ static void fsi_master_mask_set(struct fsi_master *master,
 	unsigned long flags;
 
 	if ((reg < MREG_START) ||
-	    (reg > MREG_END))
+	    (reg > MREG_END)) {
+		pr_err("fsi: register access err (%s)\n", __func__);
 		return;
+	}
 
 	spin_lock_irqsave(&master->lock, flags);
 	__fsi_reg_mask_set((u32)(master->base + reg), mask, data);
@@ -349,8 +366,8 @@ static void fsi_irq_enable(struct fsi_priv *fsi, int is_play)
 	u32 data = fsi_port_ab_io_bit(fsi, is_play);
 	struct fsi_master *master = fsi_get_master(fsi);
 
-	fsi_master_mask_set(master, master->regs->imsk,  data, data);
-	fsi_master_mask_set(master, master->regs->iemsk, data, data);
+	fsi_master_mask_set(master, master->core->imsk,  data, data);
+	fsi_master_mask_set(master, master->core->iemsk, data, data);
 }
 
 static void fsi_irq_disable(struct fsi_priv *fsi, int is_play)
@@ -358,18 +375,18 @@ static void fsi_irq_disable(struct fsi_priv *fsi, int is_play)
 	u32 data = fsi_port_ab_io_bit(fsi, is_play);
 	struct fsi_master *master = fsi_get_master(fsi);
 
-	fsi_master_mask_set(master, master->regs->imsk,  data, 0);
-	fsi_master_mask_set(master, master->regs->iemsk, data, 0);
+	fsi_master_mask_set(master, master->core->imsk,  data, 0);
+	fsi_master_mask_set(master, master->core->iemsk, data, 0);
 }
 
 static u32 fsi_irq_get_status(struct fsi_master *master)
 {
-	return fsi_master_read(master, master->regs->int_st);
+	return fsi_master_read(master, master->core->int_st);
 }
 
 static void fsi_irq_clear_all_status(struct fsi_master *master)
 {
-	fsi_master_write(master, master->regs->int_st, 0x0000000);
+	fsi_master_write(master, master->core->int_st, 0);
 }
 
 static void fsi_irq_clear_status(struct fsi_priv *fsi)
@@ -381,7 +398,30 @@ static void fsi_irq_clear_status(struct fsi_priv *fsi)
 	data |= fsi_port_ab_io_bit(fsi, 1);
 
 	/* clear interrupt factor */
-	fsi_master_mask_set(master, master->regs->int_st, data, 0);
+	fsi_master_mask_set(master, master->core->int_st, data, 0);
+}
+
+/************************************************************************
+
+
+		SPDIF master clock function
+
+These functions are used later FSI2
+************************************************************************/
+static void fsi_spdif_clk_ctrl(struct fsi_priv *fsi, int enable)
+{
+	struct fsi_master *master = fsi_get_master(fsi);
+	u32 val = BP | SE;
+
+	if (master->core->ver < 2) {
+		pr_err("fsi: register access err (%s)\n", __func__);
+		return;
+	}
+
+	if (enable)
+		fsi_master_mask_set(master, fsi->mst_ctrl, val, val);
+	else
+		fsi_master_mask_set(master, fsi->mst_ctrl, val, 0);
 }
 
 /************************************************************************
@@ -662,8 +702,8 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
 			   struct snd_soc_dai *dai)
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
-	const char *msg;
 	u32 flags = fsi_get_info_flags(fsi);
+	struct fsi_master *master = fsi_get_master(fsi);
 	u32 fmt;
 	u32 reg;
 	u32 data;
@@ -700,36 +740,40 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
 	fmt = is_play ? SH_FSI_GET_OFMT(flags) : SH_FSI_GET_IFMT(flags);
 	switch (fmt) {
 	case SH_FSI_FMT_MONO:
-		msg = "MONO";
-		data = CR_FMT(CR_MONO);
+		data = CR_MONO;
 		fsi->chan = 1;
 		break;
 	case SH_FSI_FMT_MONO_DELAY:
-		msg = "MONO Delay";
-		data = CR_FMT(CR_MONO_D);
+		data = CR_MONO_D;
 		fsi->chan = 1;
 		break;
 	case SH_FSI_FMT_PCM:
-		msg = "PCM";
-		data = CR_FMT(CR_PCM);
+		data = CR_PCM;
 		fsi->chan = 2;
 		break;
 	case SH_FSI_FMT_I2S:
-		msg = "I2S";
-		data = CR_FMT(CR_I2S);
+		data = CR_I2S;
 		fsi->chan = 2;
 		break;
 	case SH_FSI_FMT_TDM:
-		msg = "TDM";
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
-		data = CR_FMT(CR_TDM) | (fsi->chan - 1);
+		data = CR_TDM | (fsi->chan - 1);
 		break;
 	case SH_FSI_FMT_TDM_DELAY:
-		msg = "TDM Delay";
 		fsi->chan = is_play ?
 			SH_FSI_GET_CH_O(flags) : SH_FSI_GET_CH_I(flags);
-		data = CR_FMT(CR_TDM_D) | (fsi->chan - 1);
+		data = CR_TDM_D | (fsi->chan - 1);
+		break;
+	case SH_FSI_FMT_SPDIF:
+		if (master->core->ver < 2) {
+			dev_err(dai->dev, "This FSI can not use SPDIF\n");
+			return -EINVAL;
+		}
+		data = CR_SPDIF;
+		fsi->chan = 2;
+		fsi_spdif_clk_ctrl(fsi, 1);
+		fsi_reg_mask_set(fsi, OUT_SEL, 0x0010, 0x0010);
 		break;
 	default:
 		dev_err(dai->dev, "unknown format.\n");
@@ -737,12 +781,6 @@ static int fsi_dai_startup(struct snd_pcm_substream *substream,
 	}
 	fsi_reg_write(fsi, reg, data);
 
-	/*
-	 * clear clk reset if master mode
-	 */
-	if (is_master)
-		fsi_clk_ctrl(fsi, 1);
-
 	/* irq clear */
 	fsi_irq_disable(fsi, is_play);
 	fsi_irq_clear_status(fsi);
@@ -789,10 +827,93 @@ static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 	return ret;
 }
 
+static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params,
+			     struct snd_soc_dai *dai)
+{
+	struct fsi_priv *fsi = fsi_get_priv(substream);
+	struct fsi_master *master = fsi_get_master(fsi);
+	int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+	int fsi_ver = master->core->ver;
+	int is_play = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+	int ret;
+
+	/* if slave mode, set_rate is not needed */
+	if (!fsi_is_master_mode(fsi, is_play))
+		return 0;
+
+	/* it is error if no set_rate */
+	if (!set_rate)
+		return -EIO;
+
+	ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+	if (ret > 0) {
+		u32 data = 0;
+
+		switch (ret & SH_FSI_ACKMD_MASK) {
+		default:
+			/* FALL THROUGH */
+		case SH_FSI_ACKMD_512:
+			data |= (0x0 << 12);
+			break;
+		case SH_FSI_ACKMD_256:
+			data |= (0x1 << 12);
+			break;
+		case SH_FSI_ACKMD_128:
+			data |= (0x2 << 12);
+			break;
+		case SH_FSI_ACKMD_64:
+			data |= (0x3 << 12);
+			break;
+		case SH_FSI_ACKMD_32:
+			if (fsi_ver < 2)
+				dev_err(dai->dev, "unsupported ACKMD\n");
+			else
+				data |= (0x4 << 12);
+			break;
+		}
+
+		switch (ret & SH_FSI_BPFMD_MASK) {
+		default:
+			/* FALL THROUGH */
+		case SH_FSI_BPFMD_32:
+			data |= (0x0 << 8);
+			break;
+		case SH_FSI_BPFMD_64:
+			data |= (0x1 << 8);
+			break;
+		case SH_FSI_BPFMD_128:
+			data |= (0x2 << 8);
+			break;
+		case SH_FSI_BPFMD_256:
+			data |= (0x3 << 8);
+			break;
+		case SH_FSI_BPFMD_512:
+			data |= (0x4 << 8);
+			break;
+		case SH_FSI_BPFMD_16:
+			if (fsi_ver < 2)
+				dev_err(dai->dev, "unsupported ACKMD\n");
+			else
+				data |= (0x7 << 8);
+			break;
+		}
+
+		fsi_reg_mask_set(fsi, CKG1, (ACKMD_MASK | BPFMD_MASK) , data);
+		udelay(10);
+		fsi_clk_ctrl(fsi, 1);
+		ret = 0;
+	}
+
+	return ret;
+
+}
+
 static struct snd_soc_dai_ops fsi_dai_ops = {
 	.startup	= fsi_dai_startup,
 	.shutdown	= fsi_dai_shutdown,
 	.trigger	= fsi_dai_trigger,
+	.hw_params	= fsi_dai_hw_params,
 };
 
 /************************************************************************
@@ -965,11 +1086,6 @@ static int fsi_probe(struct platform_device *pdev)
 	unsigned int irq;
 	int ret;
 
-	if (0 != pdev->id) {
-		dev_err(&pdev->dev, "current fsi support id 0 only now\n");
-		return -ENODEV;
-	}
-
 	id_entry = pdev->id_entry;
 	if (!id_entry) {
 		dev_err(&pdev->dev, "unknown fsi device\n");
@@ -998,14 +1114,21 @@ static int fsi_probe(struct platform_device *pdev)
 		goto exit_kfree;
 	}
 
+	/* master setting */
 	master->irq		= irq;
 	master->info		= pdev->dev.platform_data;
+	master->core		= (struct fsi_core *)id_entry->driver_data;
+	spin_lock_init(&master->lock);
+
+	/* FSI A setting */
 	master->fsia.base	= master->base;
 	master->fsia.master	= master;
+	master->fsia.mst_ctrl	= A_MST_CTLR;
+
+	/* FSI B setting */
 	master->fsib.base	= master->base + 0x40;
 	master->fsib.master	= master;
-	master->regs		= (struct fsi_regs *)id_entry->driver_data;
-	spin_lock_init(&master->lock);
+	master->fsib.mst_ctrl	= B_MST_CTLR;
 
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
@@ -1085,21 +1208,27 @@ static struct dev_pm_ops fsi_pm_ops = {
 	.runtime_resume		= fsi_runtime_nop,
 };
 
-static struct fsi_regs fsi_regs = {
+static struct fsi_core fsi1_core = {
+	.ver	= 1,
+
+	/* Interrupt */
 	.int_st	= INT_ST,
 	.iemsk	= IEMSK,
 	.imsk	= IMSK,
 };
 
-static struct fsi_regs fsi2_regs = {
+static struct fsi_core fsi2_core = {
+	.ver	= 2,
+
+	/* Interrupt */
 	.int_st	= CPU_INT_ST,
 	.iemsk	= CPU_IEMSK,
 	.imsk	= CPU_IMSK,
 };
 
 static struct platform_device_id fsi_id_table[] = {
-	{ "sh_fsi",	(kernel_ulong_t)&fsi_regs },
-	{ "sh_fsi2",	(kernel_ulong_t)&fsi2_regs },
+	{ "sh_fsi",	(kernel_ulong_t)&fsi1_core },
+	{ "sh_fsi2",	(kernel_ulong_t)&fsi2_core },
 };
 
 static struct platform_driver fsi_driver = {
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index e048e091009..844ae8221a3 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -84,7 +84,7 @@ static int run_delayed_work(struct delayed_work *dwork)
 /* codec register dump */
 static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
 {
-	int i, step = 1, count = 0;
+	int ret, i, step = 1, count = 0;
 
 	if (!codec->reg_cache_size)
 		return 0;
@@ -101,12 +101,24 @@ static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
 		if (count >= PAGE_SIZE - 1)
 			break;
 
-		if (codec->display_register)
+		if (codec->display_register) {
 			count += codec->display_register(codec, buf + count,
 							 PAGE_SIZE - count, i);
-		else
-			count += snprintf(buf + count, PAGE_SIZE - count,
-					  "%4x", codec->read(codec, i));
+		} else {
+			/* If the read fails it's almost certainly due to
+			 * the register being volatile and the device being
+			 * powered off.
+			 */
+			ret = codec->read(codec, i);
+			if (ret >= 0)
+				count += snprintf(buf + count,
+						  PAGE_SIZE - count,
+						  "%4x", ret);
+			else
+				count += snprintf(buf + count,
+						  PAGE_SIZE - count,
+						  "<no data: %d>", ret);
+		}
 
 		if (count >= PAGE_SIZE - 1)
 			break;
@@ -2353,6 +2365,99 @@ int snd_soc_limit_volume(struct snd_soc_codec *codec,
 EXPORT_SYMBOL_GPL(snd_soc_limit_volume);
 
 /**
+ * snd_soc_info_volsw_2r_sx - double with tlv and variable data size
+ *  mixer info callback
+ * @kcontrol: mixer control
+ * @uinfo: control element information
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_info_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_info *uinfo)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	int max = mc->max;
+	int min = mc->min;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 2;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = max-min;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_info_volsw_2r_sx);
+
+/**
+ * snd_soc_get_volsw_2r_sx - double with tlv and variable data size
+ *  mixer get callback
+ * @kcontrol: mixer control
+ * @uinfo: control element information
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_get_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int mask = (1<<mc->shift)-1;
+	int min = mc->min;
+	int val = snd_soc_read(codec, mc->reg) & mask;
+	int valr = snd_soc_read(codec, mc->rreg) & mask;
+
+	ucontrol->value.integer.value[0] = ((val & 0xff)-min) & mask;
+	ucontrol->value.integer.value[1] = ((valr & 0xff)-min) & mask;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_get_volsw_2r_sx);
+
+/**
+ * snd_soc_put_volsw_2r_sx - double with tlv and variable data size
+ *  mixer put callback
+ * @kcontrol: mixer control
+ * @uinfo: control element information
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_put_volsw_2r_sx(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int mask = (1<<mc->shift)-1;
+	int min = mc->min;
+	int ret;
+	unsigned int val, valr, oval, ovalr;
+
+	val = ((ucontrol->value.integer.value[0]+min) & 0xff);
+	val &= mask;
+	valr = ((ucontrol->value.integer.value[1]+min) & 0xff);
+	valr &= mask;
+
+	oval = snd_soc_read(codec, mc->reg) & mask;
+	ovalr = snd_soc_read(codec, mc->rreg) & mask;
+
+	ret = 0;
+	if (oval != val) {
+		ret = snd_soc_write(codec, mc->reg, val);
+		if (ret < 0)
+			return ret;
+	}
+	if (ovalr != valr) {
+		ret = snd_soc_write(codec, mc->rreg, valr);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_put_volsw_2r_sx);
+
+/**
  * snd_soc_dai_set_sysclk - configure DAI system or master clock.
  * @dai: DAI
  * @clk_id: DAI specific clock ID
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 7c2d677a2df..cb61317df50 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -576,8 +576,6 @@ static int soundcore_open(struct inode *inode, struct file *file)
 	struct sound_unit *s;
 	const struct file_operations *new_fops = NULL;
 
-	lock_kernel ();
-
 	chain=unit&0x0F;
 	if(chain==4 || chain==5)	/* dsp/audio/dsp16 */
 	{
@@ -630,18 +628,19 @@ static int soundcore_open(struct inode *inode, struct file *file)
 		const struct file_operations *old_fops = file->f_op;
 		file->f_op = new_fops;
 		spin_unlock(&sound_loader_lock);
-		if(file->f_op->open)
+
+		if (file->f_op->open)
 			err = file->f_op->open(inode,file);
+
 		if (err) {
 			fops_put(file->f_op);
 			file->f_op = fops_get(old_fops);
 		}
+
 		fops_put(old_fops);
-		unlock_kernel();
 		return err;
 	}
 	spin_unlock(&sound_loader_lock);
-	unlock_kernel();
 	return -ENODEV;
 }
 
diff --git a/sound/sparc/amd7930.c b/sound/sparc/amd7930.c
index 71221fd2094..9eb1a4e0363 100644
--- a/sound/sparc/amd7930.c
+++ b/sound/sparc/amd7930.c
@@ -1010,7 +1010,7 @@ static int __devinit amd7930_sbus_probe(struct of_device *op, const struct of_de
 	struct snd_amd7930 *amd;
 	int err, irq;
 
-	irq = op->irqs[0];
+	irq = op->archdata.irqs[0];
 
 	if (dev_num >= SNDRV_CARDS)
 		return -ENODEV;
@@ -1075,7 +1075,7 @@ static struct of_platform_driver amd7930_sbus_driver = {
 
 static int __init amd7930_init(void)
 {
-	return of_register_driver(&amd7930_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&amd7930_sbus_driver);
 }
 
 static void __exit amd7930_exit(void)
@@ -1092,7 +1092,7 @@ static void __exit amd7930_exit(void)
 
 	amd7930_list = NULL;
 
-	of_unregister_driver(&amd7930_sbus_driver);
+	of_unregister_platform_driver(&amd7930_sbus_driver);
 }
 
 module_init(amd7930_init);
diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c
index fb4c6f2f29e..68570ee2c9b 100644
--- a/sound/sparc/cs4231.c
+++ b/sound/sparc/cs4231.c
@@ -1832,14 +1832,14 @@ static int __devinit snd_cs4231_sbus_create(struct snd_card *card,
 	chip->c_dma.request = sbus_dma_request;
 	chip->c_dma.address = sbus_dma_addr;
 
-	if (request_irq(op->irqs[0], snd_cs4231_sbus_interrupt,
+	if (request_irq(op->archdata.irqs[0], snd_cs4231_sbus_interrupt,
 			IRQF_SHARED, "cs4231", chip)) {
 		snd_printdd("cs4231-%d: Unable to grab SBUS IRQ %d\n",
-			    dev, op->irqs[0]);
+			    dev, op->archdata.irqs[0]);
 		snd_cs4231_sbus_free(chip);
 		return -EBUSY;
 	}
-	chip->irq[0] = op->irqs[0];
+	chip->irq[0] = op->archdata.irqs[0];
 
 	if (snd_cs4231_probe(chip) < 0) {
 		snd_cs4231_sbus_free(chip);
@@ -1870,7 +1870,7 @@ static int __devinit cs4231_sbus_probe(struct of_device *op, const struct of_dev
 		card->shortname,
 		rp->flags & 0xffL,
 		(unsigned long long)rp->start,
-		op->irqs[0]);
+		op->archdata.irqs[0]);
 
 	err = snd_cs4231_sbus_create(card, op, dev);
 	if (err < 0) {
@@ -1979,12 +1979,12 @@ static int __devinit snd_cs4231_ebus_create(struct snd_card *card,
 	chip->c_dma.ebus_info.flags = EBUS_DMA_FLAG_USE_EBDMA_HANDLER;
 	chip->c_dma.ebus_info.callback = snd_cs4231_ebus_capture_callback;
 	chip->c_dma.ebus_info.client_cookie = chip;
-	chip->c_dma.ebus_info.irq = op->irqs[0];
+	chip->c_dma.ebus_info.irq = op->archdata.irqs[0];
 	strcpy(chip->p_dma.ebus_info.name, "cs4231(play)");
 	chip->p_dma.ebus_info.flags = EBUS_DMA_FLAG_USE_EBDMA_HANDLER;
 	chip->p_dma.ebus_info.callback = snd_cs4231_ebus_play_callback;
 	chip->p_dma.ebus_info.client_cookie = chip;
-	chip->p_dma.ebus_info.irq = op->irqs[1];
+	chip->p_dma.ebus_info.irq = op->archdata.irqs[1];
 
 	chip->p_dma.prepare = _ebus_dma_prepare;
 	chip->p_dma.enable = _ebus_dma_enable;
@@ -2060,7 +2060,7 @@ static int __devinit cs4231_ebus_probe(struct of_device *op, const struct of_dev
 	sprintf(card->longname, "%s at 0x%llx, irq %d",
 		card->shortname,
 		op->resource[0].start,
-		op->irqs[0]);
+		op->archdata.irqs[0]);
 
 	err = snd_cs4231_ebus_create(card, op, dev);
 	if (err < 0) {
@@ -2120,12 +2120,12 @@ static struct of_platform_driver cs4231_driver = {
 
 static int __init cs4231_init(void)
 {
-	return of_register_driver(&cs4231_driver, &of_bus_type);
+	return of_register_platform_driver(&cs4231_driver);
 }
 
 static void __exit cs4231_exit(void)
 {
-	of_unregister_driver(&cs4231_driver);
+	of_unregister_platform_driver(&cs4231_driver);
 }
 
 module_init(cs4231_init);
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index 1557bf132e7..c421901c48d 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -2608,7 +2608,7 @@ static int __devinit dbri_probe(struct of_device *op, const struct of_device_id
 		return -ENOENT;
 	}
 
-	irq = op->irqs[0];
+	irq = op->archdata.irqs[0];
 	if (irq <= 0) {
 		printk(KERN_ERR "DBRI-%d: No IRQ.\n", dev);
 		return -ENODEV;
@@ -2699,12 +2699,12 @@ static struct of_platform_driver dbri_sbus_driver = {
 /* Probe for the dbri chip and then attach the driver. */
 static int __init dbri_init(void)
 {
-	return of_register_driver(&dbri_sbus_driver, &of_bus_type);
+	return of_register_platform_driver(&dbri_sbus_driver);
 }
 
 static void __exit dbri_exit(void)
 {
-	of_unregister_driver(&dbri_sbus_driver);
+	of_unregister_platform_driver(&dbri_sbus_driver);
 }
 
 module_init(dbri_init);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 7a8ac1d81be..9feb00c831a 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -217,7 +217,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
 
 	switch (protocol) {
 	case UAC_VERSION_1: {
-		struct uac_ac_header_descriptor_v1 *h1 = control_header;
+		struct uac1_ac_header_descriptor *h1 = control_header;
 
 		if (!h1->bInCollection) {
 			snd_printk(KERN_INFO "skipping empty audio interface (v1)\n");
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index b5855114667..b853f8df794 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -19,33 +19,19 @@
 
 #include <linux/bitops.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/usb.h>
-#include <linux/moduleparam.h>
-#include <linux/mutex.h>
 #include <linux/usb/audio.h>
 #include <linux/usb/audio-v2.h>
 
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
 
 #include "usbaudio.h"
 #include "card.h"
-#include "midi.h"
-#include "mixer.h"
-#include "proc.h"
-#include "quirks.h"
-#include "endpoint.h"
 #include "helper.h"
-#include "debug.h"
-#include "pcm.h"
-#include "urb.h"
-#include "format.h"
+#include "clock.h"
 
 static struct uac_clock_source_descriptor *
 	snd_usb_find_clock_source(struct usb_host_interface *ctrl_iface,
@@ -134,10 +120,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
 	return !!data;
 }
 
-/* Try to find the clock source ID of a given clock entity */
-
 static int __uac_clock_find_source(struct snd_usb_audio *chip,
-				   struct usb_host_interface *host_iface,
 				   int entity_id, unsigned long *visited)
 {
 	struct uac_clock_source_descriptor *source;
@@ -154,11 +137,11 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 	}
 
 	/* first, see if the ID we're looking for is a clock source already */
-	source = snd_usb_find_clock_source(host_iface, entity_id);
+	source = snd_usb_find_clock_source(chip->ctrl_intf, entity_id);
 	if (source)
 		return source->bClockID;
 
-	selector = snd_usb_find_clock_selector(host_iface, entity_id);
+	selector = snd_usb_find_clock_selector(chip->ctrl_intf, entity_id);
 	if (selector) {
 		int ret;
 
@@ -168,6 +151,8 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 		if (ret < 0)
 			return ret;
 
+		/* Selector values are one-based */
+
 		if (ret > selector->bNrInPins || ret < 1) {
 			printk(KERN_ERR
 				"%s(): selector reported illegal value, id %d, ret %d\n",
@@ -176,27 +161,35 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 			return -EINVAL;
 		}
 
-		return __uac_clock_find_source(chip, host_iface,
-					       selector->baCSourceID[ret-1],
+		return __uac_clock_find_source(chip, selector->baCSourceID[ret-1],
 					       visited);
 	}
 
 	/* FIXME: multipliers only act as pass-thru element for now */
-	multiplier = snd_usb_find_clock_multiplier(host_iface, entity_id);
+	multiplier = snd_usb_find_clock_multiplier(chip->ctrl_intf, entity_id);
 	if (multiplier)
-		return __uac_clock_find_source(chip, host_iface,
-					       multiplier->bCSourceID, visited);
+		return __uac_clock_find_source(chip, multiplier->bCSourceID,
+						visited);
 
 	return -EINVAL;
 }
 
-int snd_usb_clock_find_source(struct snd_usb_audio *chip,
-			      struct usb_host_interface *host_iface,
-			      int entity_id)
+/*
+ * For all kinds of sample rate settings and other device queries,
+ * the clock source (end-leaf) must be used. However, clock selectors,
+ * clock multipliers and sample rate converters may be specified as
+ * clock source input to terminal. This functions walks the clock path
+ * to its end and tries to find the source.
+ *
+ * The 'visited' bitfield is used internally to detect recursive loops.
+ *
+ * Returns the clock source UnitID (>=0) on success, or an error.
+ */
+int snd_usb_clock_find_source(struct snd_usb_audio *chip, int entity_id)
 {
 	DECLARE_BITMAP(visited, 256);
 	memset(visited, 0, sizeof(visited));
-	return __uac_clock_find_source(chip, host_iface, entity_id, visited);
+	return __uac_clock_find_source(chip, entity_id, visited);
 }
 
 static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
@@ -211,11 +204,8 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
 	ep = get_endpoint(alts, 0)->bEndpointAddress;
 
 	/* if endpoint doesn't have sampling rate control, bail out */
-	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE)) {
-		snd_printk(KERN_WARNING "%d:%d:%d: endpoint lacks sample rate attribute bit, cannot set.\n",
-				   dev->devnum, iface, fmt->altsetting);
+	if (!(fmt->attributes & UAC_EP_CS_ATTR_SAMPLE_RATE))
 		return 0;
-	}
 
 	data[0] = rate;
 	data[1] = rate >> 8;
@@ -254,12 +244,13 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
 	struct usb_device *dev = chip->dev;
 	unsigned char data[4];
 	int err, crate;
-	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fmt->clock);
+	int clock = snd_usb_clock_find_source(chip, fmt->clock);
 
 	if (clock < 0)
 		return clock;
 
 	if (!uac_clock_source_is_valid(chip, clock)) {
+		/* TODO: should we try to find valid clock setups by ourself? */
 		snd_printk(KERN_ERR "%d:%d:%d: clock source %d is not valid, cannot use\n",
 			   dev->devnum, iface, fmt->altsetting, clock);
 		return -ENXIO;
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
index beb253684e2..46630936d31 100644
--- a/sound/usb/clock.h
+++ b/sound/usb/clock.h
@@ -5,8 +5,6 @@ int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
 			     struct usb_host_interface *alts,
 			     struct audioformat *fmt, int rate);
 
-int snd_usb_clock_find_source(struct snd_usb_audio *chip,
-			      struct usb_host_interface *host_iface,
-			      int entity_id);
+int snd_usb_clock_find_source(struct snd_usb_audio *chip, int entity_id);
 
 #endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 6f6596cf2b1..1a701f1e8f5 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -33,6 +33,7 @@
 #include "pcm.h"
 #include "helper.h"
 #include "format.h"
+#include "clock.h"
 
 /*
  * free a substream
@@ -275,7 +276,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 		/* get audio formats */
 		switch (protocol) {
 		case UAC_VERSION_1: {
-			struct uac_as_header_descriptor_v1 *as =
+			struct uac1_as_header_descriptor *as =
 				snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
 
 			if (!as) {
@@ -297,7 +298,7 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 		case UAC_VERSION_2: {
 			struct uac2_input_terminal_descriptor *input_term;
 			struct uac2_output_terminal_descriptor *output_term;
-			struct uac_as_header_descriptor_v2 *as =
+			struct uac2_as_header_descriptor *as =
 				snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
 
 			if (!as) {
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 30364aba79c..4387f54d73d 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -264,13 +264,12 @@ static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
  * on the audioformat table (audio class v2).
  */
 static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
-				       struct audioformat *fp,
-				       struct usb_host_interface *iface)
+				       struct audioformat *fp)
 {
 	struct usb_device *dev = chip->dev;
 	unsigned char tmp[2], *data;
 	int nr_triplets, data_size, ret = 0;
-	int clock = snd_usb_clock_find_source(chip, chip->ctrl_intf, fp->clock);
+	int clock = snd_usb_clock_find_source(chip, fp->clock);
 
 	if (clock < 0) {
 		snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
@@ -391,7 +390,7 @@ static int parse_audio_format_i(struct snd_usb_audio *chip,
 		break;
 	case UAC_VERSION_2:
 		/* fp->channels is already set in this case */
-		ret = parse_audio_format_rates_v2(chip, fp, iface);
+		ret = parse_audio_format_rates_v2(chip, fp);
 		break;
 	}
 
@@ -450,7 +449,7 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
 		framesize = le16_to_cpu(fmt->wSamplesPerFrame);
 		snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
 		fp->frame_size = framesize;
-		ret = parse_audio_format_rates_v2(chip, fp, iface);
+		ret = parse_audio_format_rates_v2(chip, fp);
 		break;
 	}
 	}
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 46785643c66..b9c2bc65f51 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -434,7 +434,7 @@ static void snd_usbmidi_maudio_broken_running_status_input(
 			u8 cin = buffer[i] & 0x0f;
 			struct usbmidi_in_port *port = &ep->ports[cable];
 			int length;
-			
+
 			length = snd_usbmidi_cin_length[cin];
 			if (cin == 0xf && buffer[i + 1] >= 0xf8)
 				; /* realtime msg: no running status change */
@@ -628,13 +628,13 @@ static struct usb_protocol_ops snd_usbmidi_standard_ops = {
 
 static struct usb_protocol_ops snd_usbmidi_midiman_ops = {
 	.input = snd_usbmidi_midiman_input,
-	.output = snd_usbmidi_standard_output, 
+	.output = snd_usbmidi_standard_output,
 	.output_packet = snd_usbmidi_output_midiman_packet,
 };
 
 static struct usb_protocol_ops snd_usbmidi_maudio_broken_running_status_ops = {
 	.input = snd_usbmidi_maudio_broken_running_status_input,
-	.output = snd_usbmidi_standard_output, 
+	.output = snd_usbmidi_standard_output,
 	.output_packet = snd_usbmidi_output_standard_packet,
 };
 
@@ -1248,7 +1248,7 @@ static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint *ep
  */
 static int snd_usbmidi_out_endpoint_create(struct snd_usb_midi* umidi,
 					   struct snd_usb_midi_endpoint_info* ep_info,
-			 		   struct snd_usb_midi_endpoint* rep)
+					   struct snd_usb_midi_endpoint* rep)
 {
 	struct snd_usb_midi_out_endpoint* ep;
 	unsigned int i;
@@ -1398,7 +1398,7 @@ static void snd_usbmidi_rawmidi_free(struct snd_rawmidi *rmidi)
 }
 
 static struct snd_rawmidi_substream *snd_usbmidi_find_substream(struct snd_usb_midi* umidi,
-							   int stream, int number)
+								int stream, int number)
 {
 	struct list_head* list;
 
@@ -1811,7 +1811,7 @@ static int snd_usbmidi_detect_endpoints(struct snd_usb_midi* umidi,
 		snd_usbmidi_switch_roland_altsetting(umidi);
 
 	if (endpoint[0].out_ep || endpoint[0].in_ep)
-		return 0;	
+		return 0;
 
 	intf = umidi->iface;
 	if (!intf || intf->num_altsetting < 1)
@@ -1849,7 +1849,7 @@ static int snd_usbmidi_detect_per_port_endpoints(struct snd_usb_midi* umidi,
 						 struct snd_usb_midi_endpoint_info* endpoints)
 {
 	int err, i;
-	
+
 	err = snd_usbmidi_detect_endpoints(umidi, endpoints, MIDI_MAX_ENDPOINTS);
 	for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
 		if (endpoints[i].out_ep)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 736d134cc03..c166db0057d 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -26,6 +26,22 @@
  *
  */
 
+/*
+ * TODOs, for both the mixer and the streaming interfaces:
+ *
+ *  - support for UAC2 effect units
+ *  - support for graphical equalizers
+ *  - RANGE and MEM set commands (UAC2)
+ *  - RANGE and MEM interrupt dispatchers (UAC2)
+ *  - audio channel clustering (UAC2)
+ *  - audio sample rate converter units (UAC2)
+ *  - proper handling of clock multipliers (UAC2)
+ *  - dispatch clock change notifications (UAC2)
+ *  	- stop PCM streams which use a clock that became invalid
+ *  	- stop PCM streams which use a clock selector that has changed
+ *  	- parse available sample rates again when clock sources changed
+ */
+
 #include <linux/bitops.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -275,28 +291,28 @@ static int get_abs_value(struct usb_mixer_elem_info *cval, int val)
 
 static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
 {
+	struct snd_usb_audio *chip = cval->mixer->chip;
 	unsigned char buf[2];
 	int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
 	int timeout = 10;
 
 	while (timeout-- > 0) {
-		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
-				    usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
-				    request,
+		if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
 				    USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
-				    validx, cval->mixer->ctrlif | (cval->id << 8),
+				    validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
 				    buf, val_len, 100) >= val_len) {
 			*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
 			return 0;
 		}
 	}
 	snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
-		    request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+		    request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
 	return -EINVAL;
 }
 
 static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
 {
+	struct snd_usb_audio *chip = cval->mixer->chip;
 	unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
 	unsigned char *val;
 	int ret, size;
@@ -312,16 +328,14 @@ static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int v
 
 	memset(buf, 0, sizeof(buf));
 
-	ret = snd_usb_ctl_msg(cval->mixer->chip->dev,
-			      usb_rcvctrlpipe(cval->mixer->chip->dev, 0),
-			      bRequest,
+	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
-			      validx, cval->mixer->ctrlif | (cval->id << 8),
+			      validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
 			      buf, size, 1000);
 
 	if (ret < 0) {
 		snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
-			   request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type);
+			   request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
 		return ret;
 	}
 
@@ -397,6 +411,7 @@ static int get_cur_mix_value(struct usb_mixer_elem_info *cval,
 int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
 				int request, int validx, int value_set)
 {
+	struct snd_usb_audio *chip = cval->mixer->chip;
 	unsigned char buf[2];
 	int val_len, timeout = 10;
 
@@ -419,15 +434,14 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
 	buf[0] = value_set & 0xff;
 	buf[1] = (value_set >> 8) & 0xff;
 	while (timeout-- > 0)
-		if (snd_usb_ctl_msg(cval->mixer->chip->dev,
-				    usb_sndctrlpipe(cval->mixer->chip->dev, 0),
-				    request,
+		if (snd_usb_ctl_msg(chip->dev,
+				    usb_sndctrlpipe(chip->dev, 0), request,
 				    USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
-				    validx, cval->mixer->ctrlif | (cval->id << 8),
+				    validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
 				    buf, val_len, 100) >= 0)
 			return 0;
 	snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
-		    request, validx, cval->mixer->ctrlif | (cval->id << 8), cval->val_type, buf[0], buf[1]);
+		    request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]);
 	return -EINVAL;
 }
 
@@ -582,9 +596,9 @@ static int get_term_name(struct mixer_build *state, struct usb_audio_term *iterm
 		switch (iterm->type >> 16) {
 		case UAC_SELECTOR_UNIT:
 			strcpy(name, "Selector"); return 8;
-		case UAC_PROCESSING_UNIT_V1:
+		case UAC1_PROCESSING_UNIT:
 			strcpy(name, "Process Unit"); return 12;
-		case UAC_EXTENSION_UNIT_V1:
+		case UAC1_EXTENSION_UNIT:
 			strcpy(name, "Ext Unit"); return 8;
 		case UAC_MIXER_UNIT:
 			strcpy(name, "Mixer"); return 5;
@@ -672,8 +686,8 @@ static int check_input_term(struct mixer_build *state, int id, struct usb_audio_
 			term->name = uac_selector_unit_iSelector(d);
 			return 0;
 		}
-		case UAC_PROCESSING_UNIT_V1:
-		case UAC_EXTENSION_UNIT_V1: {
+		case UAC1_PROCESSING_UNIT:
+		case UAC1_EXTENSION_UNIT: {
 			struct uac_processing_unit_descriptor *d = p1;
 			if (d->bNrInPins) {
 				id = d->baSourceID[0];
@@ -745,6 +759,8 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl)
  */
 static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
 {
+	struct snd_usb_audio *chip = cval->mixer->chip;
+
 	/* for failsafe */
 	cval->min = default_min;
 	cval->max = cval->min + 1;
@@ -767,7 +783,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
 		if (get_ctl_value(cval, UAC_GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
 		    get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
 			snd_printd(KERN_ERR "%d:%d: cannot get min/max values for control %d (id %d)\n",
-				   cval->id, cval->mixer->ctrlif, cval->control, cval->id);
+				   cval->id, snd_usb_ctrl_intf(chip), cval->control, cval->id);
 			return -EINVAL;
 		}
 		if (get_ctl_value(cval, UAC_GET_RES, (cval->control << 8) | minchn, &cval->res) < 0) {
@@ -1199,14 +1215,6 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, void
 		}
 	} else { /* UAC_VERSION_2 */
 		for (i = 0; i < 30/2; i++) {
-			/* From the USB Audio spec v2.0:
-			   bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
-			   each containing a set of bit pairs. If a Control is present,
-			   it must be Host readable. If a certain Control is not
-			   present then the bit pair must be set to 0b00.
-			   If a Control is present but read-only, the bit pair must be
-			   set to 0b01. If a Control is also Host programmable, the bit
-			   pair must be set to 0b11. The value 0b10 is not allowed. */
 			unsigned int ch_bits = 0;
 			unsigned int ch_read_only = 0;
 
@@ -1855,13 +1863,13 @@ static int parse_audio_unit(struct mixer_build *state, int unitid)
 		return parse_audio_selector_unit(state, unitid, p1);
 	case UAC_FEATURE_UNIT:
 		return parse_audio_feature_unit(state, unitid, p1);
-	case UAC_PROCESSING_UNIT_V1:
+	case UAC1_PROCESSING_UNIT:
 	/*   UAC2_EFFECT_UNIT has the same value */
 		if (state->mixer->protocol == UAC_VERSION_1)
 			return parse_audio_processing_unit(state, unitid, p1);
 		else
 			return 0; /* FIXME - effect units not implemented yet */
-	case UAC_EXTENSION_UNIT_V1:
+	case UAC1_EXTENSION_UNIT:
 	/*   UAC2_PROCESSING_UNIT_V2 has the same value */
 		if (state->mixer->protocol == UAC_VERSION_1)
 			return parse_audio_extension_unit(state, unitid, p1);
@@ -1905,7 +1913,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 	struct usb_host_interface *hostif;
 	void *p;
 
-	hostif = &usb_ifnum_to_if(mixer->chip->dev, mixer->ctrlif)->altsetting[0];
+	hostif = mixer->chip->ctrl_intf;
 	memset(&state, 0, sizeof(state));
 	state.chip = mixer->chip;
 	state.mixer = mixer;
@@ -1925,7 +1933,7 @@ static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
 	p = NULL;
 	while ((p = snd_usb_find_csint_desc(hostif->extra, hostif->extralen, p, UAC_OUTPUT_TERMINAL)) != NULL) {
 		if (mixer->protocol == UAC_VERSION_1) {
-			struct uac_output_terminal_descriptor_v1 *desc = p;
+			struct uac1_output_terminal_descriptor *desc = p;
 
 			if (desc->bLength < sizeof(*desc))
 				continue; /* invalid descriptor? */
@@ -1997,7 +2005,7 @@ static void snd_usb_mixer_proc_read(struct snd_info_entry *entry,
 	list_for_each_entry(mixer, &chip->mixer_list, list) {
 		snd_iprintf(buffer,
 			"USB Mixer: usb_id=0x%08x, ctrlif=%i, ctlerr=%i\n",
-				chip->usb_id, mixer->ctrlif,
+				chip->usb_id, snd_usb_ctrl_intf(chip),
 				mixer->ignore_ctl_error);
 		snd_iprintf(buffer, "Card: %s\n", chip->card->longname);
 		for (unitid = 0; unitid < MAX_ID_ELEMS; unitid++) {
@@ -2115,7 +2123,7 @@ static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer)
 	int buffer_length;
 	unsigned int epnum;
 
-	hostif = &usb_ifnum_to_if(mixer->chip->dev, mixer->ctrlif)->altsetting[0];
+	hostif = mixer->chip->ctrl_intf;
 	/* we need one interrupt input endpoint */
 	if (get_iface_desc(hostif)->bNumEndpoints < 1)
 		return 0;
@@ -2158,7 +2166,6 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
 	if (!mixer)
 		return -ENOMEM;
 	mixer->chip = chip;
-	mixer->ctrlif = ctrlif;
 	mixer->ignore_ctl_error = ignore_error;
 	mixer->id_elems = kcalloc(MAX_ID_ELEMS, sizeof(*mixer->id_elems),
 				  GFP_KERNEL);
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index a7cf1007fbb..26c636c5c93 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -3,7 +3,6 @@
 
 struct usb_mixer_interface {
 	struct snd_usb_audio *chip;
-	unsigned int ctrlif;
 	struct list_head list;
 	unsigned int ignore_ctl_error;
 	struct urb *urb;
diff --git a/sound/usb/pcm.h b/sound/usb/pcm.h
index 1c931b68f3b..ed3e283f618 100644
--- a/sound/usb/pcm.h
+++ b/sound/usb/pcm.h
@@ -7,8 +7,5 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
 		       struct usb_host_interface *alts,
 		       struct audioformat *fmt);
 
-int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
-			     struct usb_host_interface *alts,
-			     struct audioformat *fmt, int rate);
 
 #endif /* __USBAUDIO_PCM_H */
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index f8797f61a24..2e8003f98fc 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2152,7 +2152,21 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7201),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+		.vendor_name = "Hauppauge",
+		.product_name = "HVR-850",
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
+	}
+},
+{
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2166,7 +2180,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7202),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7217),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2180,7 +2194,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7203),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721b),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2194,7 +2208,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7204),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721e),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2208,7 +2222,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7205),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721f),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2222,7 +2236,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7250),
+	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2236,7 +2250,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7230),
+	USB_DEVICE_VENDOR_SPEC(0x0fd9, 0x0008),
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
 		       USB_DEVICE_ID_MATCH_INT_CLASS |
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
@@ -2244,7 +2258,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
 	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
 		.vendor_name = "Hauppauge",
-		.product_name = "HVR-850",
+		.product_name = "HVR-950Q",
 		.ifnum = QUIRK_ANY_INTERFACE,
 		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
 	}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index b45e54c09ba..9a9da09586a 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -32,6 +32,7 @@
 #include "helper.h"
 #include "endpoint.h"
 #include "pcm.h"
+#include "clock.h"
 
 /*
  * handle the quirks for the contained interfaces
diff --git a/tools/firewire/Makefile b/tools/firewire/Makefile
new file mode 100644
index 00000000000..81767adaae7
--- /dev/null
+++ b/tools/firewire/Makefile
@@ -0,0 +1,19 @@
+prefix = /usr
+nosy-dump-version = 0.4
+
+CC = gcc
+
+all : nosy-dump
+
+nosy-dump : CFLAGS = -Wall -O2 -g
+nosy-dump : CPPFLAGS = -DVERSION=\"$(nosy-dump-version)\" -I../../drivers/firewire
+nosy-dump : LDFLAGS = -g
+nosy-dump : LDLIBS = -lpopt
+
+nosy-dump : nosy-dump.o decode-fcp.o
+
+clean :
+	rm -rf *.o nosy-dump
+
+install :
+	install nosy-dump $(prefix)/bin/nosy-dump
diff --git a/tools/firewire/decode-fcp.c b/tools/firewire/decode-fcp.c
new file mode 100644
index 00000000000..e41223b6a4c
--- /dev/null
+++ b/tools/firewire/decode-fcp.c
@@ -0,0 +1,213 @@
+#include <linux/firewire-constants.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "list.h"
+#include "nosy-dump.h"
+
+#define CSR_FCP_COMMAND			0xfffff0000b00ull
+#define CSR_FCP_RESPONSE		0xfffff0000d00ull
+
+static const char * const ctype_names[] = {
+	[0x0] = "control",		[0x8] = "not implemented",
+	[0x1] = "status",		[0x9] = "accepted",
+	[0x2] = "specific inquiry",	[0xa] = "rejected",
+	[0x3] = "notify",		[0xb] = "in transition",
+	[0x4] = "general inquiry",	[0xc] = "stable",
+	[0x5] = "(reserved 0x05)",	[0xd] = "changed",
+	[0x6] = "(reserved 0x06)",	[0xe] = "(reserved 0x0e)",
+	[0x7] = "(reserved 0x07)",	[0xf] = "interim",
+};
+
+static const char * const subunit_type_names[] = {
+	[0x00] = "monitor",		[0x10] = "(reserved 0x10)",
+	[0x01] = "audio",		[0x11] = "(reserved 0x11)",
+	[0x02] = "printer",		[0x12] = "(reserved 0x12)",
+	[0x03] = "disc",		[0x13] = "(reserved 0x13)",
+	[0x04] = "tape recorder/player",[0x14] = "(reserved 0x14)",
+	[0x05] = "tuner",		[0x15] = "(reserved 0x15)",
+	[0x06] = "ca",			[0x16] = "(reserved 0x16)",
+	[0x07] = "camera",		[0x17] = "(reserved 0x17)",
+	[0x08] = "(reserved 0x08)",	[0x18] = "(reserved 0x18)",
+	[0x09] = "panel",		[0x19] = "(reserved 0x19)",
+	[0x0a] = "bulletin board",	[0x1a] = "(reserved 0x1a)",
+	[0x0b] = "camera storage",	[0x1b] = "(reserved 0x1b)",
+	[0x0c] = "(reserved 0x0c)",	[0x1c] = "vendor unique",
+	[0x0d] = "(reserved 0x0d)",	[0x1d] = "all subunit types",
+	[0x0e] = "(reserved 0x0e)",	[0x1e] = "subunit_type extended to next byte",
+	[0x0f] = "(reserved 0x0f)",	[0x1f] = "unit",
+};
+
+struct avc_enum {
+	int value;
+	const char *name;
+};
+
+struct avc_field {
+	const char *name;	/* Short name for field. */
+	int offset;		/* Location of field, specified in bits; */
+				/* negative means from end of packet.    */
+	int width;		/* Width of field, 0 means use data_length. */
+	struct avc_enum *names;
+};
+
+struct avc_opcode_info {
+	const char *name;
+	struct avc_field fields[8];
+};
+
+struct avc_enum power_field_names[] = {
+	{ 0x70, "on" },
+	{ 0x60, "off" },
+	{ }
+};
+
+static const struct avc_opcode_info opcode_info[256] = {
+
+	/* TA Document 1999026 */
+	/* AV/C Digital Interface Command Set General Specification 4.0 */
+	[0xb2] = { "power", {
+			{ "state", 0, 8, power_field_names }
+		}
+	},
+	[0x30] = { "unit info", {
+			{ "foo", 0, 8 },
+			{ "unit_type", 8, 5 },
+			{ "unit", 13, 3 },
+			{ "company id", 16, 24 },
+		}
+	},
+	[0x31] = { "subunit info" },
+	[0x01] = { "reserve" },
+	[0xb0] = { "version" },
+	[0x00] = { "vendor dependent" },
+	[0x02] = { "plug info" },
+	[0x12] = { "channel usage" },
+	[0x24] = { "connect" },
+	[0x20] = { "connect av" },
+	[0x22] = { "connections" },
+	[0x11] = { "digital input" },
+	[0x10] = { "digital output" },
+	[0x25] = { "disconnect" },
+	[0x21] = { "disconnect av" },
+	[0x19] = { "input plug signal format" },
+	[0x18] = { "output plug signal format" },
+	[0x1f] = { "general bus setup" },
+
+	/* TA Document 1999025 */
+	/* AV/C Descriptor Mechanism Specification Version 1.0 */
+	[0x0c] = { "create descriptor" },
+	[0x08] = { "open descriptor" },
+	[0x09] = { "read descriptor" },
+	[0x0a] = { "write descriptor" },
+	[0x05] = { "open info block" },
+	[0x06] = { "read info block" },
+	[0x07] = { "write info block" },
+	[0x0b] = { "search descriptor" },
+	[0x0d] = { "object number select" },
+
+	/* TA Document 1999015 */
+	/* AV/C Command Set for Rate Control of Isochronous Data Flow 1.0 */
+	[0xb3] = { "rate", {
+			{ "subfunction", 0, 8 },
+			{ "result", 8, 8 },
+			{ "plug_type", 16, 8 },
+			{ "plug_id", 16, 8 },
+		}
+	},
+
+	/* TA Document 1999008 */
+	/* AV/C Audio Subunit Specification 1.0 */
+	[0xb8] = { "function block" },
+
+	/* TA Document 2001001 */
+	/* AV/C Panel Subunit Specification 1.1 */
+	[0x7d] = { "gui update" },
+	[0x7e] = { "push gui data" },
+	[0x7f] = { "user action" },
+	[0x7c] = { "pass through" },
+
+	/* */
+	[0x26] = { "asynchronous connection" },
+};
+
+struct avc_frame {
+	uint32_t operand0:8;
+	uint32_t opcode:8;
+	uint32_t subunit_id:3;
+	uint32_t subunit_type:5;
+	uint32_t ctype:4;
+	uint32_t cts:4;
+};
+
+static void
+decode_avc(struct link_transaction *t)
+{
+	struct avc_frame *frame =
+	    (struct avc_frame *) t->request->packet.write_block.data;
+	const struct avc_opcode_info *info;
+	const char *name;
+	char buffer[32];
+	int i;
+
+	info = &opcode_info[frame->opcode];
+	if (info->name == NULL) {
+		snprintf(buffer, sizeof(buffer),
+			 "(unknown opcode 0x%02x)", frame->opcode);
+		name = buffer;
+	} else {
+		name = info->name;
+	}
+
+	printf("av/c %s, subunit_type=%s, subunit_id=%d, opcode=%s",
+	    ctype_names[frame->ctype], subunit_type_names[frame->subunit_type],
+	    frame->subunit_id, name);
+
+	for (i = 0; info->fields[i].name != NULL; i++)
+		printf(", %s", info->fields[i].name);
+
+	printf("\n");
+}
+
+int
+decode_fcp(struct link_transaction *t)
+{
+	struct avc_frame *frame =
+	    (struct avc_frame *) t->request->packet.write_block.data;
+	unsigned long long offset =
+	    ((unsigned long long) t->request->packet.common.offset_high << 32) |
+	    t->request->packet.common.offset_low;
+
+	if (t->request->packet.common.tcode != TCODE_WRITE_BLOCK_REQUEST)
+		return 0;
+
+	if (offset == CSR_FCP_COMMAND || offset == CSR_FCP_RESPONSE) {
+		switch (frame->cts) {
+		case 0x00:
+			decode_avc(t);
+			break;
+		case 0x01:
+			printf("cal fcp frame (cts=0x01)\n");
+			break;
+		case 0x02:
+			printf("ehs fcp frame (cts=0x02)\n");
+			break;
+		case 0x03:
+			printf("havi fcp frame (cts=0x03)\n");
+			break;
+		case 0x0e:
+			printf("vendor specific fcp frame (cts=0x0e)\n");
+			break;
+		case 0x0f:
+			printf("extended cts\n");
+			break;
+		default:
+			printf("reserved fcp frame (ctx=0x%02x)\n", frame->cts);
+			break;
+		}
+		return 1;
+	}
+
+	return 0;
+}
+
diff --git a/tools/firewire/list.h b/tools/firewire/list.h
new file mode 100644
index 00000000000..41f4bdadf63
--- /dev/null
+++ b/tools/firewire/list.h
@@ -0,0 +1,62 @@
+struct list {
+	struct list *next, *prev;
+};
+
+static inline void
+list_init(struct list *list)
+{
+	list->next = list;
+	list->prev = list;
+}
+
+static inline int
+list_empty(struct list *list)
+{
+	return list->next == list;
+}
+
+static inline void
+list_insert(struct list *link, struct list *new_link)
+{
+	new_link->prev		= link->prev;
+	new_link->next		= link;
+	new_link->prev->next	= new_link;
+	new_link->next->prev	= new_link;
+}
+
+static inline void
+list_append(struct list *list, struct list *new_link)
+{
+	list_insert((struct list *)list, new_link);
+}
+
+static inline void
+list_prepend(struct list *list, struct list *new_link)
+{
+	list_insert(list->next, new_link);
+}
+
+static inline void
+list_remove(struct list *link)
+{
+	link->prev->next = link->next;
+	link->next->prev = link->prev;
+}
+
+#define list_entry(link, type, member) \
+	((type *)((char *)(link)-(unsigned long)(&((type *)0)->member)))
+
+#define list_head(list, type, member)		\
+	list_entry((list)->next, type, member)
+
+#define list_tail(list, type, member)		\
+	list_entry((list)->prev, type, member)
+
+#define list_next(elm, member)					\
+	list_entry((elm)->member.next, typeof(*elm), member)
+
+#define list_for_each_entry(pos, list, member)			\
+	for (pos = list_head(list, typeof(*pos), member);	\
+	     &pos->member != (list);				\
+	     pos = list_next(pos, member))
+
diff --git a/tools/firewire/nosy-dump.c b/tools/firewire/nosy-dump.c
new file mode 100644
index 00000000000..f93b776370b
--- /dev/null
+++ b/tools/firewire/nosy-dump.c
@@ -0,0 +1,1031 @@
+/*
+ * nosy-dump - Interface to snoop mode driver for TI PCILynx 1394 controllers
+ * Copyright (C) 2002-2006 Kristian Høgsberg
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <byteswap.h>
+#include <endian.h>
+#include <fcntl.h>
+#include <linux/firewire-constants.h>
+#include <poll.h>
+#include <popt.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <termios.h>
+#include <unistd.h>
+
+#include "list.h"
+#include "nosy-dump.h"
+#include "nosy-user.h"
+
+enum {
+	PACKET_FIELD_DETAIL		= 0x01,
+	PACKET_FIELD_DATA_LENGTH	= 0x02,
+	/* Marks the fields we print in transaction view. */
+	PACKET_FIELD_TRANSACTION	= 0x04,
+};
+
+static void print_packet(uint32_t *data, size_t length);
+static void decode_link_packet(struct link_packet *packet, size_t length,
+			       int include_flags, int exclude_flags);
+static int run = 1;
+sig_t sys_sigint_handler;
+
+static char *option_nosy_device = "/dev/nosy";
+static char *option_view = "packet";
+static char *option_output;
+static char *option_input;
+static int option_hex;
+static int option_iso;
+static int option_cycle_start;
+static int option_version;
+static int option_verbose;
+
+enum {
+	VIEW_TRANSACTION,
+	VIEW_PACKET,
+	VIEW_STATS,
+};
+
+static const struct poptOption options[] = {
+	{
+		.longName	= "device",
+		.shortName	= 'd',
+		.argInfo	= POPT_ARG_STRING,
+		.arg		= &option_nosy_device,
+		.descrip	= "Path to nosy device.",
+		.argDescrip	= "DEVICE"
+	},
+	{
+		.longName	= "view",
+		.argInfo	= POPT_ARG_STRING,
+		.arg		= &option_view,
+		.descrip	= "Specify view of bus traffic: packet, transaction or stats.",
+		.argDescrip	= "VIEW"
+	},
+	{
+		.longName	= "hex",
+		.shortName	= 'x',
+		.argInfo	= POPT_ARG_NONE,
+		.arg		= &option_hex,
+		.descrip	= "Print each packet in hex.",
+	},
+	{
+		.longName	= "iso",
+		.argInfo	= POPT_ARG_NONE,
+		.arg		= &option_iso,
+		.descrip	= "Print iso packets.",
+	},
+	{
+		.longName	= "cycle-start",
+		.argInfo	= POPT_ARG_NONE,
+		.arg		= &option_cycle_start,
+		.descrip	= "Print cycle start packets.",
+	},
+	{
+		.longName	= "verbose",
+		.shortName	= 'v',
+		.argInfo	= POPT_ARG_NONE,
+		.arg		= &option_verbose,
+		.descrip	= "Verbose packet view.",
+	},
+	{
+		.longName	= "output",
+		.shortName	= 'o',
+		.argInfo	= POPT_ARG_STRING,
+		.arg		= &option_output,
+		.descrip	= "Log to output file.",
+		.argDescrip	= "FILENAME"
+	},
+	{
+		.longName	= "input",
+		.shortName	= 'i',
+		.argInfo	= POPT_ARG_STRING,
+		.arg		= &option_input,
+		.descrip	= "Decode log from file.",
+		.argDescrip	= "FILENAME"
+	},
+	{
+		.longName	= "version",
+		.argInfo	= POPT_ARG_NONE,
+		.arg		= &option_version,
+		.descrip	= "Specify print version info.",
+	},
+	POPT_AUTOHELP
+	POPT_TABLEEND
+};
+
+/* Allow all ^C except the first to interrupt the program in the usual way. */
+static void
+sigint_handler(int signal_num)
+{
+	if (run == 1) {
+		run = 0;
+		signal(SIGINT, SIG_DFL);
+	}
+}
+
+static struct subaction *
+subaction_create(uint32_t *data, size_t length)
+{
+	struct subaction *sa;
+
+	/* we put the ack in the subaction struct for easy access. */
+	sa = malloc(sizeof *sa - sizeof sa->packet + length);
+	sa->ack = data[length / 4 - 1];
+	sa->length = length;
+	memcpy(&sa->packet, data, length);
+
+	return sa;
+}
+
+static void
+subaction_destroy(struct subaction *sa)
+{
+	free(sa);
+}
+
+static struct list pending_transaction_list = {
+	&pending_transaction_list, &pending_transaction_list
+};
+
+static struct link_transaction *
+link_transaction_lookup(int request_node, int response_node, int tlabel)
+{
+	struct link_transaction *t;
+
+	list_for_each_entry(t, &pending_transaction_list, link) {
+		if (t->request_node == request_node &&
+		    t->response_node == response_node &&
+		    t->tlabel == tlabel)
+			return t;
+	}
+
+	t = malloc(sizeof *t);
+	t->request_node = request_node;
+	t->response_node = response_node;
+	t->tlabel = tlabel;
+	list_init(&t->request_list);
+	list_init(&t->response_list);
+
+	list_append(&pending_transaction_list, &t->link);
+
+	return t;
+}
+
+static void
+link_transaction_destroy(struct link_transaction *t)
+{
+	struct subaction *sa;
+
+	while (!list_empty(&t->request_list)) {
+		sa = list_head(&t->request_list, struct subaction, link);
+		list_remove(&sa->link);
+		subaction_destroy(sa);
+	}
+	while (!list_empty(&t->response_list)) {
+		sa = list_head(&t->response_list, struct subaction, link);
+		list_remove(&sa->link);
+		subaction_destroy(sa);
+	}
+	free(t);
+}
+
+struct protocol_decoder {
+	const char *name;
+	int (*decode)(struct link_transaction *t);
+};
+
+static const struct protocol_decoder protocol_decoders[] = {
+	{ "FCP", decode_fcp }
+};
+
+static void
+handle_transaction(struct link_transaction *t)
+{
+	struct subaction *sa;
+	int i;
+
+	if (!t->request) {
+		printf("BUG in handle_transaction\n");
+		return;
+	}
+
+	for (i = 0; i < array_length(protocol_decoders); i++)
+		if (protocol_decoders[i].decode(t))
+			break;
+
+	/* HACK: decode only fcp right now. */
+	return;
+
+	decode_link_packet(&t->request->packet, t->request->length,
+			   PACKET_FIELD_TRANSACTION, 0);
+	if (t->response)
+		decode_link_packet(&t->response->packet, t->request->length,
+				   PACKET_FIELD_TRANSACTION, 0);
+	else
+		printf("[no response]");
+
+	if (option_verbose) {
+		list_for_each_entry(sa, &t->request_list, link)
+			print_packet((uint32_t *) &sa->packet, sa->length);
+		list_for_each_entry(sa, &t->response_list, link)
+			print_packet((uint32_t *) &sa->packet, sa->length);
+	}
+	printf("\r\n");
+
+	link_transaction_destroy(t);
+}
+
+static void
+clear_pending_transaction_list(void)
+{
+	struct link_transaction *t;
+
+	while (!list_empty(&pending_transaction_list)) {
+		t = list_head(&pending_transaction_list,
+			      struct link_transaction, link);
+		list_remove(&t->link);
+		link_transaction_destroy(t);
+		/* print unfinished transactions */
+	}
+}
+
+static const char * const tcode_names[] = {
+	[0x0] = "write_quadlet_request",	[0x6] = "read_quadlet_response",
+	[0x1] = "write_block_request",		[0x7] = "read_block_response",
+	[0x2] = "write_response",		[0x8] = "cycle_start",
+	[0x3] = "reserved",			[0x9] = "lock_request",
+	[0x4] = "read_quadlet_request",		[0xa] = "iso_data",
+	[0x5] = "read_block_request",		[0xb] = "lock_response",
+};
+
+static const char * const ack_names[] = {
+	[0x0] = "no ack",			[0x8] = "reserved (0x08)",
+	[0x1] = "ack_complete",			[0x9] = "reserved (0x09)",
+	[0x2] = "ack_pending",			[0xa] = "reserved (0x0a)",
+	[0x3] = "reserved (0x03)",		[0xb] = "reserved (0x0b)",
+	[0x4] = "ack_busy_x",			[0xc] = "reserved (0x0c)",
+	[0x5] = "ack_busy_a",			[0xd] = "ack_data_error",
+	[0x6] = "ack_busy_b",			[0xe] = "ack_type_error",
+	[0x7] = "reserved (0x07)",		[0xf] = "reserved (0x0f)",
+};
+
+static const char * const rcode_names[] = {
+	[0x0] = "complete",			[0x4] = "conflict_error",
+	[0x1] = "reserved (0x01)",		[0x5] = "data_error",
+	[0x2] = "reserved (0x02)",		[0x6] = "type_error",
+	[0x3] = "reserved (0x03)",		[0x7] = "address_error",
+};
+
+static const char * const retry_names[] = {
+	[0x0] = "retry_1",
+	[0x1] = "retry_x",
+	[0x2] = "retry_a",
+	[0x3] = "retry_b",
+};
+
+enum {
+	PACKET_RESERVED,
+	PACKET_REQUEST,
+	PACKET_RESPONSE,
+	PACKET_OTHER,
+};
+
+struct packet_info {
+	const char *name;
+	int type;
+	int response_tcode;
+	const struct packet_field *fields;
+	int field_count;
+};
+
+struct packet_field {
+	const char *name; /* Short name for field. */
+	int offset;	/* Location of field, specified in bits; */
+			/* negative means from end of packet.    */
+	int width;	/* Width of field, 0 means use data_length. */
+	int flags;	/* Show options. */
+	const char * const *value_names;
+};
+
+#define COMMON_REQUEST_FIELDS						\
+	{ "dest", 0, 16, PACKET_FIELD_TRANSACTION },			\
+	{ "tl", 16, 6 },						\
+	{ "rt", 22, 2, PACKET_FIELD_DETAIL, retry_names },		\
+	{ "tcode", 24, 4, PACKET_FIELD_TRANSACTION, tcode_names },	\
+	{ "pri", 28, 4, PACKET_FIELD_DETAIL },				\
+	{ "src", 32, 16, PACKET_FIELD_TRANSACTION },			\
+	{ "offs", 48, 48, PACKET_FIELD_TRANSACTION }
+
+#define COMMON_RESPONSE_FIELDS						\
+	{ "dest", 0, 16 },						\
+	{ "tl", 16, 6 },						\
+	{ "rt", 22, 2, PACKET_FIELD_DETAIL, retry_names },		\
+	{ "tcode", 24, 4, 0, tcode_names },				\
+	{ "pri", 28, 4, PACKET_FIELD_DETAIL },				\
+	{ "src", 32, 16 },						\
+	{ "rcode", 48, 4, PACKET_FIELD_TRANSACTION, rcode_names }
+
+static const struct packet_field read_quadlet_request_fields[] = {
+	COMMON_REQUEST_FIELDS,
+	{ "crc", 96, 32, PACKET_FIELD_DETAIL },
+	{ "ack", 156, 4, 0, ack_names },
+};
+
+static const struct packet_field read_quadlet_response_fields[] = {
+	COMMON_RESPONSE_FIELDS,
+	{ "data", 96, 32, PACKET_FIELD_TRANSACTION },
+	{ "crc", 128, 32, PACKET_FIELD_DETAIL },
+	{ "ack", 188, 4, 0, ack_names },
+};
+
+static const struct packet_field read_block_request_fields[] = {
+	COMMON_REQUEST_FIELDS,
+	{ "data_length", 96, 16, PACKET_FIELD_TRANSACTION },
+	{ "extended_tcode", 112, 16 },
+	{ "crc", 128, 32, PACKET_FIELD_DETAIL },
+	{ "ack", 188, 4, 0, ack_names },
+};
+
+static const struct packet_field block_response_fields[] = {
+	COMMON_RESPONSE_FIELDS,
+	{ "data_length", 96, 16, PACKET_FIELD_DATA_LENGTH },
+	{ "extended_tcode", 112, 16 },
+	{ "crc", 128, 32, PACKET_FIELD_DETAIL },
+	{ "data", 160, 0, PACKET_FIELD_TRANSACTION },
+	{ "crc", -64, 32, PACKET_FIELD_DETAIL },
+	{ "ack", -4, 4, 0, ack_names },
+};
+
+static const struct packet_field write_quadlet_request_fields[] = {
+	COMMON_REQUEST_FIELDS,
+	{ "data", 96, 32, PACKET_FIELD_TRANSACTION },
+	{ "ack", -4, 4, 0, ack_names },
+};
+
+static const struct packet_field block_request_fields[] = {
+	COMMON_REQUEST_FIELDS,
+	{ "data_length", 96, 16, PACKET_FIELD_DATA_LENGTH | PACKET_FIELD_TRANSACTION },
+	{ "extended_tcode", 112, 16, PACKET_FIELD_TRANSACTION },
+	{ "crc", 128, 32, PACKET_FIELD_DETAIL },
+	{ "data", 160, 0, PACKET_FIELD_TRANSACTION },
+	{ "crc", -64, 32, PACKET_FIELD_DETAIL },
+	{ "ack", -4, 4, 0, ack_names },
+};
+
+static const struct packet_field write_response_fields[] = {
+	COMMON_RESPONSE_FIELDS,
+	{ "reserved", 64, 32, PACKET_FIELD_DETAIL },
+	{ "ack", -4, 4, 0, ack_names },
+};
+
+static const struct packet_field iso_data_fields[] = {
+	{ "data_length", 0, 16, PACKET_FIELD_DATA_LENGTH },
+	{ "tag", 16, 2 },
+	{ "channel", 18, 6 },
+	{ "tcode", 24, 4, 0, tcode_names },
+	{ "sy", 28, 4 },
+	{ "crc", 32, 32, PACKET_FIELD_DETAIL },
+	{ "data", 64, 0 },
+	{ "crc", -64, 32, PACKET_FIELD_DETAIL },
+	{ "ack", -4, 4, 0, ack_names },
+};
+
+static const struct packet_info packet_info[] = {
+	{
+		.name		= "write_quadlet_request",
+		.type		= PACKET_REQUEST,
+		.response_tcode	= TCODE_WRITE_RESPONSE,
+		.fields		= write_quadlet_request_fields,
+		.field_count	= array_length(write_quadlet_request_fields)
+	},
+	{
+		.name		= "write_block_request",
+		.type		= PACKET_REQUEST,
+		.response_tcode	= TCODE_WRITE_RESPONSE,
+		.fields		= block_request_fields,
+		.field_count	= array_length(block_request_fields)
+	},
+	{
+		.name		= "write_response",
+		.type		= PACKET_RESPONSE,
+		.fields		= write_response_fields,
+		.field_count	= array_length(write_response_fields)
+	},
+	{
+		.name		= "reserved",
+		.type		= PACKET_RESERVED,
+	},
+	{
+		.name		= "read_quadlet_request",
+		.type		= PACKET_REQUEST,
+		.response_tcode	= TCODE_READ_QUADLET_RESPONSE,
+		.fields		= read_quadlet_request_fields,
+		.field_count	= array_length(read_quadlet_request_fields)
+	},
+	{
+		.name		= "read_block_request",
+		.type		= PACKET_REQUEST,
+		.response_tcode	= TCODE_READ_BLOCK_RESPONSE,
+		.fields		= read_block_request_fields,
+		.field_count	= array_length(read_block_request_fields)
+	},
+	{
+		.name		= "read_quadlet_response",
+		.type		= PACKET_RESPONSE,
+		.fields		= read_quadlet_response_fields,
+		.field_count	= array_length(read_quadlet_response_fields)
+	},
+	{
+		.name		= "read_block_response",
+		.type		= PACKET_RESPONSE,
+		.fields		= block_response_fields,
+		.field_count	= array_length(block_response_fields)
+	},
+	{
+		.name		= "cycle_start",
+		.type		= PACKET_OTHER,
+		.fields		= write_quadlet_request_fields,
+		.field_count	= array_length(write_quadlet_request_fields)
+	},
+	{
+		.name		= "lock_request",
+		.type		= PACKET_REQUEST,
+		.fields		= block_request_fields,
+		.field_count	= array_length(block_request_fields)
+	},
+	{
+		.name		= "iso_data",
+		.type		= PACKET_OTHER,
+		.fields		= iso_data_fields,
+		.field_count	= array_length(iso_data_fields)
+	},
+	{
+		.name		= "lock_response",
+		.type		= PACKET_RESPONSE,
+		.fields		= block_response_fields,
+		.field_count	= array_length(block_response_fields)
+	},
+};
+
+static int
+handle_request_packet(uint32_t *data, size_t length)
+{
+	struct link_packet *p = (struct link_packet *) data;
+	struct subaction *sa, *prev;
+	struct link_transaction *t;
+
+	t = link_transaction_lookup(p->common.source, p->common.destination,
+			p->common.tlabel);
+	sa = subaction_create(data, length);
+	t->request = sa;
+
+	if (!list_empty(&t->request_list)) {
+		prev = list_tail(&t->request_list,
+				 struct subaction, link);
+
+		if (!ACK_BUSY(prev->ack)) {
+			/*
+			 * error, we should only see ack_busy_* before the
+			 * ack_pending/ack_complete -- this is an ack_pending
+			 * instead (ack_complete would have finished the
+			 * transaction).
+			 */
+		}
+
+		if (prev->packet.common.tcode != sa->packet.common.tcode ||
+		    prev->packet.common.tlabel != sa->packet.common.tlabel) {
+			/* memcmp() ? */
+			/* error, these should match for retries. */
+		}
+	}
+
+	list_append(&t->request_list, &sa->link);
+
+	switch (sa->ack) {
+	case ACK_COMPLETE:
+		if (p->common.tcode != TCODE_WRITE_QUADLET_REQUEST &&
+		    p->common.tcode != TCODE_WRITE_BLOCK_REQUEST)
+			/* error, unified transactions only allowed for write */;
+		list_remove(&t->link);
+		handle_transaction(t);
+		break;
+
+	case ACK_NO_ACK:
+	case ACK_DATA_ERROR:
+	case ACK_TYPE_ERROR:
+		list_remove(&t->link);
+		handle_transaction(t);
+		break;
+
+	case ACK_PENDING:
+		/* request subaction phase over, wait for response. */
+		break;
+
+	case ACK_BUSY_X:
+	case ACK_BUSY_A:
+	case ACK_BUSY_B:
+		/* ok, wait for retry. */
+		/* check that retry protocol is respected. */
+		break;
+	}
+
+	return 1;
+}
+
+static int
+handle_response_packet(uint32_t *data, size_t length)
+{
+	struct link_packet *p = (struct link_packet *) data;
+	struct subaction *sa, *prev;
+	struct link_transaction *t;
+
+	t = link_transaction_lookup(p->common.destination, p->common.source,
+			p->common.tlabel);
+	if (list_empty(&t->request_list)) {
+		/* unsolicited response */
+	}
+
+	sa = subaction_create(data, length);
+	t->response = sa;
+
+	if (!list_empty(&t->response_list)) {
+		prev = list_tail(&t->response_list, struct subaction, link);
+
+		if (!ACK_BUSY(prev->ack)) {
+			/*
+			 * error, we should only see ack_busy_* before the
+			 * ack_pending/ack_complete
+			 */
+		}
+
+		if (prev->packet.common.tcode != sa->packet.common.tcode ||
+		    prev->packet.common.tlabel != sa->packet.common.tlabel) {
+			/* use memcmp() instead? */
+			/* error, these should match for retries. */
+		}
+	} else {
+		prev = list_tail(&t->request_list, struct subaction, link);
+		if (prev->ack != ACK_PENDING) {
+			/*
+			 * error, should not get response unless last request got
+			 * ack_pending.
+			 */
+		}
+
+		if (packet_info[prev->packet.common.tcode].response_tcode !=
+		    sa->packet.common.tcode) {
+			/* error, tcode mismatch */
+		}
+	}
+
+	list_append(&t->response_list, &sa->link);
+
+	switch (sa->ack) {
+	case ACK_COMPLETE:
+	case ACK_NO_ACK:
+	case ACK_DATA_ERROR:
+	case ACK_TYPE_ERROR:
+		list_remove(&t->link);
+		handle_transaction(t);
+		/* transaction complete, remove t from pending list. */
+		break;
+
+	case ACK_PENDING:
+		/* error for responses. */
+		break;
+
+	case ACK_BUSY_X:
+	case ACK_BUSY_A:
+	case ACK_BUSY_B:
+		/* no problem, wait for next retry */
+		break;
+	}
+
+	return 1;
+}
+
+static int
+handle_packet(uint32_t *data, size_t length)
+{
+	if (length == 0) {
+		printf("bus reset\r\n");
+		clear_pending_transaction_list();
+	} else if (length > sizeof(struct phy_packet)) {
+		struct link_packet *p = (struct link_packet *) data;
+
+		switch (packet_info[p->common.tcode].type) {
+		case PACKET_REQUEST:
+			return handle_request_packet(data, length);
+
+		case PACKET_RESPONSE:
+			return handle_response_packet(data, length);
+
+		case PACKET_OTHER:
+		case PACKET_RESERVED:
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+static unsigned int
+get_bits(struct link_packet *packet, int offset, int width)
+{
+	uint32_t *data = (uint32_t *) packet;
+	uint32_t index, shift, mask;
+
+	index = offset / 32 + 1;
+	shift = 32 - (offset & 31) - width;
+	mask = width == 32 ? ~0 : (1 << width) - 1;
+
+	return (data[index] >> shift) & mask;
+}
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define byte_index(i) ((i) ^ 3)
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define byte_index(i) (i)
+#else
+#error unsupported byte order.
+#endif
+
+static void
+dump_data(unsigned char *data, int length)
+{
+	int i, print_length;
+
+	if (length > 128)
+		print_length = 128;
+	else
+		print_length = length;
+
+	for (i = 0; i < print_length; i++)
+		printf("%s%02hhx",
+		       (i % 4 == 0 && i != 0) ? " " : "",
+		       data[byte_index(i)]);
+
+	if (print_length < length)
+		printf(" (%d more bytes)", length - print_length);
+}
+
+static void
+decode_link_packet(struct link_packet *packet, size_t length,
+		   int include_flags, int exclude_flags)
+{
+	const struct packet_info *pi;
+	int data_length = 0;
+	int i;
+
+	pi = &packet_info[packet->common.tcode];
+
+	for (i = 0; i < pi->field_count; i++) {
+		const struct packet_field *f = &pi->fields[i];
+		int offset;
+
+		if (f->flags & exclude_flags)
+			continue;
+		if (include_flags && !(f->flags & include_flags))
+			continue;
+
+		if (f->offset < 0)
+			offset = length * 8 + f->offset - 32;
+		else
+			offset = f->offset;
+
+		if (f->value_names != NULL) {
+			uint32_t bits;
+
+			bits = get_bits(packet, offset, f->width);
+			printf("%s", f->value_names[bits]);
+		} else if (f->width == 0) {
+			printf("%s=[", f->name);
+			dump_data((unsigned char *) packet + (offset / 8 + 4), data_length);
+			printf("]");
+		} else {
+			unsigned long long bits;
+			int high_width, low_width;
+
+			if ((offset & ~31) != ((offset + f->width - 1) & ~31)) {
+				/* Bit field spans quadlet boundary. */
+				high_width = ((offset + 31) & ~31) - offset;
+				low_width = f->width - high_width;
+
+				bits = get_bits(packet, offset, high_width);
+				bits = (bits << low_width) |
+					get_bits(packet, offset + high_width, low_width);
+			} else {
+				bits = get_bits(packet, offset, f->width);
+			}
+
+			printf("%s=0x%0*llx", f->name, (f->width + 3) / 4, bits);
+
+			if (f->flags & PACKET_FIELD_DATA_LENGTH)
+				data_length = bits;
+		}
+
+		if (i < pi->field_count - 1)
+			printf(", ");
+	}
+}
+
+static void
+print_packet(uint32_t *data, size_t length)
+{
+	int i;
+
+	printf("%6u  ", data[0]);
+
+	if (length == 4) {
+		printf("bus reset");
+	} else if (length < sizeof(struct phy_packet)) {
+		printf("short packet: ");
+		for (i = 1; i < length / 4; i++)
+			printf("%s%08x", i == 0 ? "[" : " ", data[i]);
+		printf("]");
+
+	} else if (length == sizeof(struct phy_packet) && data[1] == ~data[2]) {
+		struct phy_packet *pp = (struct phy_packet *) data;
+
+		/* phy packet are 3 quadlets: the 1 quadlet payload,
+		 * the bitwise inverse of the payload and the snoop
+		 * mode ack */
+
+		switch (pp->common.identifier) {
+		case PHY_PACKET_CONFIGURATION:
+			if (!pp->phy_config.set_root && !pp->phy_config.set_gap_count) {
+				printf("ext phy config: phy_id=%02x", pp->phy_config.root_id);
+			} else {
+				printf("phy config:");
+				if (pp->phy_config.set_root)
+					printf(" set_root_id=%02x", pp->phy_config.root_id);
+				if (pp->phy_config.set_gap_count)
+					printf(" set_gap_count=%d", pp->phy_config.gap_count);
+			}
+			break;
+
+		case PHY_PACKET_LINK_ON:
+			printf("link-on packet, phy_id=%02x", pp->link_on.phy_id);
+			break;
+
+		case PHY_PACKET_SELF_ID:
+			if (pp->self_id.extended) {
+				printf("extended self id: phy_id=%02x, seq=%d",
+				       pp->ext_self_id.phy_id, pp->ext_self_id.sequence);
+			} else {
+				static const char * const speed_names[] = {
+					"S100", "S200", "S400", "BETA"
+				};
+				printf("self id: phy_id=%02x, link %s, gap_count=%d, speed=%s%s%s",
+				       pp->self_id.phy_id,
+				       (pp->self_id.link_active ? "active" : "not active"),
+				       pp->self_id.gap_count,
+				       speed_names[pp->self_id.phy_speed],
+				       (pp->self_id.contender ? ", irm contender" : ""),
+				       (pp->self_id.initiated_reset ? ", initiator" : ""));
+			}
+			break;
+		default:
+			printf("unknown phy packet: ");
+			for (i = 1; i < length / 4; i++)
+				printf("%s%08x", i == 0 ? "[" : " ", data[i]);
+			printf("]");
+			break;
+		}
+	} else {
+		struct link_packet *packet = (struct link_packet *) data;
+
+		decode_link_packet(packet, length, 0,
+				   option_verbose ? 0 : PACKET_FIELD_DETAIL);
+	}
+
+	if (option_hex) {
+		printf("  [");
+		dump_data((unsigned char *) data + 4, length - 4);
+		printf("]");
+	}
+
+	printf("\r\n");
+}
+
+#define HIDE_CURSOR	"\033[?25l"
+#define SHOW_CURSOR	"\033[?25h"
+#define CLEAR		"\033[H\033[2J"
+
+static void
+print_stats(uint32_t *data, size_t length)
+{
+	static int bus_reset_count, short_packet_count, phy_packet_count;
+	static int tcode_count[16];
+	static struct timeval last_update;
+	struct timeval now;
+	int i;
+
+	if (length == 0)
+		bus_reset_count++;
+	else if (length < sizeof(struct phy_packet))
+		short_packet_count++;
+	else if (length == sizeof(struct phy_packet) && data[1] == ~data[2])
+		phy_packet_count++;
+	else {
+		struct link_packet *packet = (struct link_packet *) data;
+		tcode_count[packet->common.tcode]++;
+	}
+
+	gettimeofday(&now, NULL);
+	if (now.tv_sec <= last_update.tv_sec &&
+	    now.tv_usec < last_update.tv_usec + 500000)
+		return;
+
+	last_update = now;
+	printf(CLEAR HIDE_CURSOR
+	       "  bus resets              : %8d\n"
+	       "  short packets           : %8d\n"
+	       "  phy packets             : %8d\n",
+	       bus_reset_count, short_packet_count, phy_packet_count);
+
+	for (i = 0; i < array_length(packet_info); i++)
+		if (packet_info[i].type != PACKET_RESERVED)
+			printf("  %-24s: %8d\n", packet_info[i].name, tcode_count[i]);
+	printf(SHOW_CURSOR "\n");
+}
+
+static struct termios saved_attributes;
+
+static void
+reset_input_mode(void)
+{
+	tcsetattr(STDIN_FILENO, TCSANOW, &saved_attributes);
+}
+
+static void
+set_input_mode(void)
+{
+	struct termios tattr;
+
+	/* Make sure stdin is a terminal. */
+	if (!isatty(STDIN_FILENO)) {
+		fprintf(stderr, "Not a terminal.\n");
+		exit(EXIT_FAILURE);
+	}
+
+	/* Save the terminal attributes so we can restore them later. */
+	tcgetattr(STDIN_FILENO, &saved_attributes);
+	atexit(reset_input_mode);
+
+	/* Set the funny terminal modes. */
+	tcgetattr(STDIN_FILENO, &tattr);
+	tattr.c_lflag &= ~(ICANON|ECHO); /* Clear ICANON and ECHO. */
+	tattr.c_cc[VMIN] = 1;
+	tattr.c_cc[VTIME] = 0;
+	tcsetattr(STDIN_FILENO, TCSAFLUSH, &tattr);
+}
+
+int main(int argc, const char *argv[])
+{
+	uint32_t buf[128 * 1024];
+	uint32_t filter;
+	int length, retval, view;
+	int fd = -1;
+	FILE *output = NULL, *input = NULL;
+	poptContext con;
+	char c;
+	struct pollfd pollfds[2];
+
+	sys_sigint_handler = signal(SIGINT, sigint_handler);
+
+	con = poptGetContext(NULL, argc, argv, options, 0);
+	retval = poptGetNextOpt(con);
+	if (retval < -1) {
+		poptPrintUsage(con, stdout, 0);
+		return -1;
+	}
+
+	if (option_version) {
+		printf("dump tool for nosy sniffer, version %s\n", VERSION);
+		return 0;
+	}
+
+	if (__BYTE_ORDER != __LITTLE_ENDIAN)
+		fprintf(stderr, "warning: nosy has only been tested on little "
+			"endian machines\n");
+
+	if (option_input != NULL) {
+		input = fopen(option_input, "r");
+		if (input == NULL) {
+			fprintf(stderr, "Could not open %s, %m\n", option_input);
+			return -1;
+		}
+	} else {
+		fd = open(option_nosy_device, O_RDWR);
+		if (fd < 0) {
+			fprintf(stderr, "Could not open %s, %m\n", option_nosy_device);
+			return -1;
+		}
+		set_input_mode();
+	}
+
+	if (strcmp(option_view, "transaction") == 0)
+		view = VIEW_TRANSACTION;
+	else if (strcmp(option_view, "stats") == 0)
+		view = VIEW_STATS;
+	else
+		view = VIEW_PACKET;
+
+	if (option_output) {
+		output = fopen(option_output, "w");
+		if (output == NULL) {
+			fprintf(stderr, "Could not open %s, %m\n", option_output);
+			return -1;
+		}
+	}
+
+	setvbuf(stdout, NULL, _IOLBF, BUFSIZ);
+
+	filter = ~0;
+	if (!option_iso)
+		filter &= ~(1 << TCODE_STREAM_DATA);
+	if (!option_cycle_start)
+		filter &= ~(1 << TCODE_CYCLE_START);
+	if (view == VIEW_STATS)
+		filter = ~(1 << TCODE_CYCLE_START);
+
+	ioctl(fd, NOSY_IOC_FILTER, filter);
+
+	ioctl(fd, NOSY_IOC_START);
+
+	pollfds[0].fd = fd;
+	pollfds[0].events = POLLIN;
+	pollfds[1].fd = STDIN_FILENO;
+	pollfds[1].events = POLLIN;
+
+	while (run) {
+		if (input != NULL) {
+			if (fread(&length, sizeof length, 1, input) != 1)
+				return 0;
+			fread(buf, 1, length, input);
+		} else {
+			poll(pollfds, 2, -1);
+			if (pollfds[1].revents) {
+				read(STDIN_FILENO, &c, sizeof c);
+				switch (c) {
+				case 'q':
+					if (output != NULL)
+						fclose(output);
+					return 0;
+				}
+			}
+
+			if (pollfds[0].revents)
+				length = read(fd, buf, sizeof buf);
+			else
+				continue;
+		}
+
+		if (output != NULL) {
+			fwrite(&length, sizeof length, 1, output);
+			fwrite(buf, 1, length, output);
+		}
+
+		switch (view) {
+		case VIEW_TRANSACTION:
+			handle_packet(buf, length);
+			break;
+		case VIEW_PACKET:
+			print_packet(buf, length);
+			break;
+		case VIEW_STATS:
+			print_stats(buf, length);
+			break;
+		}
+	}
+
+	if (output != NULL)
+		fclose(output);
+
+	close(fd);
+
+	poptFreeContext(con);
+
+	return 0;
+}
diff --git a/tools/firewire/nosy-dump.h b/tools/firewire/nosy-dump.h
new file mode 100644
index 00000000000..3a4b5b33ba5
--- /dev/null
+++ b/tools/firewire/nosy-dump.h
@@ -0,0 +1,173 @@
+#ifndef __nosy_dump_h__
+#define __nosy_dump_h__
+
+#define array_length(array) (sizeof(array) / sizeof(array[0]))
+
+#define ACK_NO_ACK   0x0
+#define ACK_DONE(a)  ((a >> 2) == 0)
+#define ACK_BUSY(a)  ((a >> 2) == 1)
+#define ACK_ERROR(a) ((a >> 2) == 3)
+
+#include <stdint.h>
+
+struct phy_packet {
+	uint32_t timestamp;
+	union {
+		struct {
+			uint32_t zero:24;
+			uint32_t phy_id:6;
+			uint32_t identifier:2;
+		} common, link_on;
+
+		struct {
+			uint32_t zero:16;
+			uint32_t gap_count:6;
+			uint32_t set_gap_count:1;
+			uint32_t set_root:1;
+			uint32_t root_id:6;
+			uint32_t identifier:2;
+		} phy_config;
+
+		struct {
+			uint32_t more_packets:1;
+			uint32_t initiated_reset:1;
+			uint32_t port2:2;
+			uint32_t port1:2;
+			uint32_t port0:2;
+			uint32_t power_class:3;
+			uint32_t contender:1;
+			uint32_t phy_delay:2;
+			uint32_t phy_speed:2;
+			uint32_t gap_count:6;
+			uint32_t link_active:1;
+			uint32_t extended:1;
+			uint32_t phy_id:6;
+			uint32_t identifier:2;
+		} self_id;
+
+		struct {
+			uint32_t more_packets:1;
+			uint32_t reserved1:1;
+			uint32_t porth:2;
+			uint32_t portg:2;
+			uint32_t portf:2;
+			uint32_t porte:2;
+			uint32_t portd:2;
+			uint32_t portc:2;
+			uint32_t portb:2;
+			uint32_t porta:2;
+			uint32_t reserved0:2;
+			uint32_t sequence:3;
+			uint32_t extended:1;
+			uint32_t phy_id:6;
+			uint32_t identifier:2;
+		} ext_self_id;
+	};
+	uint32_t inverted;
+	uint32_t ack;
+};
+
+#define TCODE_PHY_PACKET 0x10
+
+#define PHY_PACKET_CONFIGURATION 0x00
+#define PHY_PACKET_LINK_ON 0x01
+#define PHY_PACKET_SELF_ID 0x02
+
+struct link_packet {
+	uint32_t timestamp;
+	union {
+		struct {
+			uint32_t priority:4;
+			uint32_t tcode:4;
+			uint32_t rt:2;
+			uint32_t tlabel:6;
+			uint32_t destination:16;
+
+			uint32_t offset_high:16;
+			uint32_t source:16;
+
+			uint32_t offset_low;
+		} common;
+
+		struct {
+			uint32_t common[3];
+			uint32_t crc;
+		} read_quadlet;
+
+		struct {
+			uint32_t common[3];
+			uint32_t data;
+			uint32_t crc;
+		} read_quadlet_response;
+
+		struct {
+			uint32_t common[3];
+			uint32_t extended_tcode:16;
+			uint32_t data_length:16;
+			uint32_t crc;
+		} read_block;
+
+		struct {
+			uint32_t common[3];
+			uint32_t extended_tcode:16;
+			uint32_t data_length:16;
+			uint32_t crc;
+			uint32_t data[0];
+			/* crc and ack follows. */
+		} read_block_response;
+
+		struct {
+			uint32_t common[3];
+			uint32_t data;
+			uint32_t crc;
+		} write_quadlet;
+
+		struct {
+			uint32_t common[3];
+			uint32_t extended_tcode:16;
+			uint32_t data_length:16;
+			uint32_t crc;
+			uint32_t data[0];
+			/* crc and ack follows. */
+		} write_block;
+
+		struct {
+			uint32_t common[3];
+			uint32_t crc;
+		} write_response;
+
+		struct {
+			uint32_t common[3];
+			uint32_t data;
+			uint32_t crc;
+		} cycle_start;
+
+		struct {
+			uint32_t sy:4;
+			uint32_t tcode:4;
+			uint32_t channel:6;
+			uint32_t tag:2;
+			uint32_t data_length:16;
+
+			uint32_t crc;
+		} iso_data;
+	};
+};
+
+struct subaction {
+	uint32_t ack;
+	size_t length;
+	struct list link;
+	struct link_packet packet;
+};
+
+struct link_transaction {
+	int request_node, response_node, tlabel;
+	struct subaction *request, *response;
+	struct list request_list, response_list;
+	struct list link;
+};
+
+int decode_fcp(struct link_transaction *t);
+
+#endif /* __nosy_dump_h__ */
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index e1d60d78078..cb43289e447 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -18,3 +18,5 @@ perf-archive
 tags
 TAGS
 cscope*
+config.mak
+config.mak.autogen
diff --git a/tools/perf/Documentation/perf-buildid-cache.txt b/tools/perf/Documentation/perf-buildid-cache.txt
index 5d1a9500277..c1057701a7d 100644
--- a/tools/perf/Documentation/perf-buildid-cache.txt
+++ b/tools/perf/Documentation/perf-buildid-cache.txt
@@ -12,9 +12,9 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-This command manages the build-id cache. It can add and remove files to the
-cache. In the future it should as well purge older entries, set upper limits
-for the space used by the cache, etc.
+This command manages the build-id cache. It can add and remove files to/from
+the cache. In the future it should as well purge older entries, set upper
+limits for the space used by the cache, etc.
 
 OPTIONS
 -------
@@ -23,7 +23,7 @@ OPTIONS
         Add specified file to the cache.
 -r::
 --remove=::
-        Remove specified file to the cache.
+        Remove specified file from the cache.
 -v::
 --verbose::
 	Be more verbose.
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 94a258c96a4..27d52dae5a4 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -31,6 +31,10 @@ OPTIONS
 --vmlinux=PATH::
 	Specify vmlinux path which has debuginfo (Dwarf binary).
 
+-s::
+--source=PATH::
+	Specify path to kernel source.
+
 -v::
 --verbose::
         Be more verbose (show parsed arguments, etc).
@@ -90,8 +94,8 @@ Each probe argument follows below syntax.
 
  [NAME=]LOCALVAR|$retval|%REG|@SYMBOL[:TYPE]
 
-'NAME' specifies the name of this argument (optional). You can use the name of local variable, local data structure member (e.g. var->field, var.field2), or kprobe-tracer argument format (e.g. $retval, %ax, etc). Note that the name of this argument will be set as the last member name if you specify a local data structure member (e.g. field2 for 'var->field1.field2'.)
-'TYPE' casts the type of this argument (optional). If omitted, perf probe automatically set the type based on debuginfo.
+'NAME' specifies the name of this argument (optional). You can use the name of local variable, local data structure member (e.g. var->field, var.field2), local array with fixed index (e.g. array[1], var->array[0], var->pointer[2]), or kprobe-tracer argument format (e.g. $retval, %ax, etc). Note that the name of this argument will be set as the last member name if you specify a local data structure member (e.g. field2 for 'var->field1.field2'.)
+'TYPE' casts the type of this argument (optional). If omitted, perf probe automatically set the type based on debuginfo. You can specify 'string' type only for the local variable or structure member which is an array of or a pointer to 'char' or 'unsigned char' type.
 
 LINE SYNTAX
 -----------
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 34e255fc3e2..3ee27dccfde 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -103,6 +103,19 @@ OPTIONS
 --raw-samples::
 Collect raw sample records from all opened counters (default for tracepoint counters).
 
+-C::
+--cpu::
+Collect samples only on the list of cpus provided. Multiple CPUs can be provided as a
+comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+In per-thread mode with inheritance mode on (default), samples are captured only when
+the thread executes on the designated CPUs. Default is to monitor all CPUs.
+
+-N::
+--no-buildid-cache::
+Do not update the builid cache. This saves some overhead in situations
+where the information in the perf.data file (which includes buildids)
+is sufficient.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1], linkperf:perf-list[1]
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 909fa766fa1..4b3a2d46b43 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -46,6 +46,13 @@ OPTIONS
 -B::
         print large numbers with thousands' separators according to locale
 
+-C::
+--cpu=::
+Count only on the list of cpus provided. Multiple CPUs can be provided as a
+comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+In per-thread mode, this option is ignored. The -a option is still necessary
+to activate system-wide monitoring. Default is to count on all CPUs.
+
 EXAMPLES
 --------
 
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 785b9fc32a4..1f9687663f2 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -25,9 +25,11 @@ OPTIONS
 --count=<count>::
 	Event period to sample.
 
--C <cpu>::
---CPU=<cpu>::
-	CPU to profile.
+-C <cpu-list>::
+--cpu=<cpu>::
+Monitor only on the list of cpus provided. Multiple CPUs can be provided as a
+comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Default is to monitor all CPUS.
 
 -d <seconds>::
 --delay=<seconds>::
diff --git a/tools/perf/MANIFEST b/tools/perf/MANIFEST
new file mode 100644
index 00000000000..8c7fc0c8f0b
--- /dev/null
+++ b/tools/perf/MANIFEST
@@ -0,0 +1,12 @@
+tools/perf
+include/linux/perf_event.h
+include/linux/rbtree.h
+include/linux/list.h
+include/linux/hash.h
+include/linux/stringify.h
+lib/rbtree.c
+include/linux/swab.h
+arch/*/include/asm/unistd*.h
+include/linux/poison.h
+include/linux/magic.h
+include/linux/hw_breakpoint.h
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index d75c28a825f..26f626d45a9 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -285,14 +285,10 @@ else
 	QUIET_STDERR = ">/dev/null 2>&1"
 endif
 
-BITBUCKET = "/dev/null"
+-include feature-tests.mak
 
-ifneq ($(shell sh -c "(echo '\#include <stdio.h>'; echo 'int main(void) { return puts(\"hi\"); }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
-	BITBUCKET = .perf.dev.null
-endif
-
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o $(BITBUCKET) "$(QUIET_STDERR)" && echo y"), y)
-  CFLAGS := $(CFLAGS) -fstack-protector-all
+ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
+	CFLAGS := $(CFLAGS) -fstack-protector-all
 endif
 
 
@@ -508,7 +504,8 @@ PERFLIBS = $(LIB_FILE)
 -include config.mak
 
 ifndef NO_DWARF
-ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo '\#include <version.h>'; echo '\#ifndef _ELFUTILS_PREREQ'; echo '\#error'; echo '\#endif'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+FLAGS_DWARF=$(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
+ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
 	msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
 	NO_DWARF := 1
 endif # Dwarf support
@@ -536,16 +533,18 @@ ifneq ($(OUTPUT),)
 	BASIC_CFLAGS += -I$(OUTPUT)
 endif
 
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-	msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
+FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
+ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF)),y)
+	FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
+	ifneq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC)),y)
+		msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
+	else
+		msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+	endif
 endif
 
-	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-		BASIC_CFLAGS += -DLIBELF_NO_MMAP
-	endif
-else
-	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
+ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
+	BASIC_CFLAGS += -DLIBELF_NO_MMAP
 endif
 
 ifndef NO_DWARF
@@ -561,64 +560,73 @@ endif # NO_DWARF
 ifdef NO_NEWT
 	BASIC_CFLAGS += -DNO_NEWT_SUPPORT
 else
-ifneq ($(shell sh -c "(echo '\#include <newt.h>'; echo 'int main(void) { newtInit(); newtCls(); return newtFinished(); }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -lnewt -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-	msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
-	BASIC_CFLAGS += -DNO_NEWT_SUPPORT
-else
-	# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
-	BASIC_CFLAGS += -I/usr/include/slang
-	EXTLIBS += -lnewt -lslang
-	LIB_OBJS += $(OUTPUT)util/newt.o
-endif
-endif # NO_NEWT
-
-ifndef NO_LIBPERL
-PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null`
-PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+	FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
+	ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
+		msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
+		BASIC_CFLAGS += -DNO_NEWT_SUPPORT
+	else
+		# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
+		BASIC_CFLAGS += -I/usr/include/slang
+		EXTLIBS += -lnewt -lslang
+		LIB_OBJS += $(OUTPUT)util/newt.o
+	endif
 endif
 
-ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o $(BITBUCKET) $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifdef NO_LIBPERL
 	BASIC_CFLAGS += -DNO_LIBPERL
 else
-	ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
-	LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
-	LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
-endif
+	PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null`
+	PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+	FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
 
-ifndef NO_LIBPYTHON
-PYTHON_EMBED_LDOPTS = `python-config --ldflags 2>/dev/null`
-PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
+	ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED)),y)
+		BASIC_CFLAGS += -DNO_LIBPERL
+	else
+		ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
+		LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
+		LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
+	endif
 endif
 
-ifneq ($(shell sh -c "(echo '\#include <Python.h>'; echo 'int main(void) { Py_Initialize(); return 0; }') | $(CC) -x c - $(PYTHON_EMBED_CCOPTS) -o $(BITBUCKET) $(PYTHON_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+ifdef NO_LIBPYTHON
 	BASIC_CFLAGS += -DNO_LIBPYTHON
 else
-	ALL_LDFLAGS += $(PYTHON_EMBED_LDOPTS)
-	LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
-	LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
+	PYTHON_EMBED_LDOPTS = `python-config --ldflags 2>/dev/null`
+	PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
+	FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
+	ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
+		BASIC_CFLAGS += -DNO_LIBPYTHON
+	else
+		ALL_LDFLAGS += $(PYTHON_EMBED_LDOPTS)
+		LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
+		LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
+	endif
 endif
 
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
 else
-	ifdef HAVE_CPLUS_DEMANGLE
+        ifdef HAVE_CPLUS_DEMANGLE
 		EXTLIBS += -liberty
 		BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
-	else
-		has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
-
+        else
+		FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd
+		has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD))
 		ifeq ($(has_bfd),y)
 			EXTLIBS += -lbfd
 		else
-			has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
+			FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
+			has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY))
 			ifeq ($(has_bfd_iberty),y)
 				EXTLIBS += -lbfd -liberty
 			else
-				has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
+				FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
+				has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z))
 				ifeq ($(has_bfd_iberty_z),y)
 					EXTLIBS += -lbfd -liberty -lz
 				else
-					has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
+					FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
+					has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE))
 					ifeq ($(has_cplus_demangle),y)
 						EXTLIBS += -liberty
 						BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
@@ -867,7 +875,7 @@ export TAR INSTALL DESTDIR SHELL_PATH
 
 SHELL = $(SHELL_PATH)
 
-all:: .perf.dev.null shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
+all:: shell_compatibility_test $(ALL_PROGRAMS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
 ifneq (,$X)
 	$(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
 endif
@@ -1197,11 +1205,6 @@ clean:
 .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
 .PHONY: .FORCE-PERF-BUILD-OPTIONS
 
-.perf.dev.null:
-		touch .perf.dev.null
-
-.INTERMEDIATE:	.perf.dev.null
-
 ### Make sure built-ins do not have dups and listed in perf.c
 #
 check-builtins::
diff --git a/tools/perf/arch/sh/Makefile b/tools/perf/arch/sh/Makefile
new file mode 100644
index 00000000000..15130b50dfe
--- /dev/null
+++ b/tools/perf/arch/sh/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/fs/nilfs2/bmap_union.h b/tools/perf/arch/sh/util/dwarf-regs.c
index d41509bff47..a11edb007a6 100644
--- a/fs/nilfs2/bmap_union.h
+++ b/tools/perf/arch/sh/util/dwarf-regs.c
@@ -1,7 +1,7 @@
 /*
- * bmap_union.h - NILFS block mapping.
+ * Mapping of DWARF debug register numbers into register names.
  *
- * Copyright (C) 2006-2008 Nippon Telegraph and Telephone Corporation.
+ * Copyright (C) 2010 Matt Fleming <matt@console-pimps.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -15,28 +15,41 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  *
- * Written by Koji Sato <koji@osrg.net>.
  */
 
-#ifndef _NILFS_BMAP_UNION_H
-#define _NILFS_BMAP_UNION_H
+#include <libio.h>
+#include <dwarf-regs.h>
 
-#include "bmap.h"
-#include "direct.h"
-#include "btree.h"
-
-/**
- * nilfs_bmap_union -
- * @bi_bmap: bmap structure
- * @bi_btree: direct map structure
- * @bi_direct: B-tree structure
+/*
+ * Generic dwarf analysis helpers
  */
-union nilfs_bmap_union {
-	struct nilfs_bmap bi_bmap;
-	struct nilfs_direct bi_direct;
-	struct nilfs_btree bi_btree;
+
+#define SH_MAX_REGS 18
+const char *sh_regs_table[SH_MAX_REGS] = {
+	"r0",
+	"r1",
+	"r2",
+	"r3",
+	"r4",
+	"r5",
+	"r6",
+	"r7",
+	"r8",
+	"r9",
+	"r10",
+	"r11",
+	"r12",
+	"r13",
+	"r14",
+	"r15",
+	"pc",
+	"pr",
 };
 
-#endif	/* _NILFS_BMAP_UNION_H */
+/* Return architecture dependent register string (for kprobe-tracer) */
+const char *get_arch_regstr(unsigned int n)
+{
+	return (n <= SH_MAX_REGS) ? sh_regs_table[n] : NULL;
+}
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 96db5248e99..fd20670ce98 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -61,11 +61,9 @@ static int hists__add_entry(struct hists *self, struct addr_location *al)
 static int process_sample_event(event_t *event, struct perf_session *session)
 {
 	struct addr_location al;
+	struct sample_data data;
 
-	dump_printf("(IP, %d): %d: %#Lx\n", event->header.misc,
-		    event->ip.pid, event->ip.ip);
-
-	if (event__preprocess_sample(event, session, &al, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
 		pr_warning("problem processing %d event, skipping it.\n",
 			   event->header.type);
 		return -1;
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index f8e3d185202..29ad20e6791 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -78,8 +78,7 @@ static int __cmd_buildid_cache(void)
 	struct str_node *pos;
 	char debugdir[PATH_MAX];
 
-	snprintf(debugdir, sizeof(debugdir), "%s/%s", getenv("HOME"),
-		 DEBUG_CACHE_DIR);
+	snprintf(debugdir, sizeof(debugdir), "%s", buildid_dir);
 
 	if (add_name_list_str) {
 		list = strlist__new(true, add_name_list_str);
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 99890728409..44a47e13bd6 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -43,10 +43,8 @@ static int __cmd_buildid_list(void)
 	if (session == NULL)
 		return -1;
 
-	if (with_hits) {
-		symbol_conf.full_paths = true;
+	if (with_hits)
 		perf_session__process_events(session, &build_id__mark_dso_hit_ops);
-	}
 
 	perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
 
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index a6e2fdc7a04..fca1d440291 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -35,10 +35,7 @@ static int diff__process_sample_event(event_t *event, struct perf_session *sessi
 	struct addr_location al;
 	struct sample_data data = { .period = 1, };
 
-	dump_printf("(IP, %d): %d: %#Lx\n", event->header.misc,
-		    event->ip.pid, event->ip.ip);
-
-	if (event__preprocess_sample(event, session, &al, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
 		pr_warning("problem processing %d event, skipping it.\n",
 			   event->header.type);
 		return -1;
@@ -47,8 +44,6 @@ static int diff__process_sample_event(event_t *event, struct perf_session *sessi
 	if (al.filtered || al.sym == NULL)
 		return 0;
 
-	event__parse_sample(event, session->sample_type, &data);
-
 	if (hists__add_entry(&session->hists, &al, data.period)) {
 		pr_warning("problem incrementing symbol period, skipping event\n");
 		return -1;
@@ -185,8 +180,6 @@ static const struct option options[] = {
 	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
 	OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
 		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
-	OPT_BOOLEAN('P', "full-paths", &symbol_conf.full_paths,
-		    "Don't shorten the pathnames taking into account the cwd"),
 	OPT_STRING('d', "dsos", &symbol_conf.dso_list_str, "dso[,dso...]",
 		   "only consider symbols in these dsos"),
 	OPT_STRING('C', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index e4a4da32a56..199d5e19554 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -182,6 +182,8 @@ static const struct option options[] = {
 		     "Show source code lines.", opt_show_lines),
 	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
 		   "file", "vmlinux pathname"),
+	OPT_STRING('s', "source", &symbol_conf.source_prefix,
+		   "directory", "path to kernel source"),
 #endif
 	OPT__DRY_RUN(&probe_event_dry_run),
 	OPT_INTEGER('\0', "max-probes", &params.max_probe_points,
@@ -265,4 +267,3 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used)
 	}
 	return 0;
 }
-
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 711745f56bb..ff77b805de7 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -49,7 +49,6 @@ static int			group				=      0;
 static int			realtime_prio			=      0;
 static bool			raw_samples			=  false;
 static bool			system_wide			=  false;
-static int			profile_cpu			=     -1;
 static pid_t			target_pid			=     -1;
 static pid_t			target_tid			=     -1;
 static pid_t			*all_tids			=      NULL;
@@ -61,6 +60,7 @@ static bool			call_graph			=  false;
 static bool			inherit_stat			=  false;
 static bool			no_samples			=  false;
 static bool			sample_address			=  false;
+static bool			no_buildid			=  false;
 
 static long			samples				=      0;
 static u64			bytes_written			=      0;
@@ -74,6 +74,7 @@ static int			file_new			=      1;
 static off_t			post_processing_offset;
 
 static struct perf_session	*session;
+static const char		*cpu_list;
 
 struct mmap_data {
 	int			counter;
@@ -268,12 +269,17 @@ static void create_counter(int counter, int cpu)
 	if (inherit_stat)
 		attr->inherit_stat = 1;
 
-	if (sample_address)
+	if (sample_address) {
 		attr->sample_type	|= PERF_SAMPLE_ADDR;
+		attr->mmap_data = track;
+	}
 
 	if (call_graph)
 		attr->sample_type	|= PERF_SAMPLE_CALLCHAIN;
 
+	if (system_wide)
+		attr->sample_type	|= PERF_SAMPLE_CPU;
+
 	if (raw_samples) {
 		attr->sample_type	|= PERF_SAMPLE_TIME;
 		attr->sample_type	|= PERF_SAMPLE_RAW;
@@ -300,7 +306,7 @@ try_again:
 				die("Permission error - are you root?\n"
 					"\t Consider tweaking"
 					" /proc/sys/kernel/perf_event_paranoid.\n");
-			else if (err ==  ENODEV && profile_cpu != -1) {
+			else if (err ==  ENODEV && cpu_list) {
 				die("No such device - did you specify"
 					" an out-of-range profile CPU?\n");
 			}
@@ -433,14 +439,14 @@ static void atexit_header(void)
 
 		process_buildids();
 		perf_header__write(&session->header, output, true);
+		perf_session__delete(session);
+		symbol__exit();
 	}
 }
 
 static void event__synthesize_guest_os(struct machine *machine, void *data)
 {
 	int err;
-	char *guest_kallsyms;
-	char path[PATH_MAX];
 	struct perf_session *psession = data;
 
 	if (machine__is_host(machine))
@@ -460,13 +466,6 @@ static void event__synthesize_guest_os(struct machine *machine, void *data)
 		pr_err("Couldn't record guest kernel [%d]'s reference"
 		       " relocation symbol.\n", machine->pid);
 
-	if (machine__is_default_guest(machine))
-		guest_kallsyms = (char *) symbol_conf.default_guest_kallsyms;
-	else {
-		sprintf(path, "%s/proc/kallsyms", machine->root_dir);
-		guest_kallsyms = path;
-	}
-
 	/*
 	 * We use _stext for guest kernel because guest kernel's /proc/kallsyms
 	 * have no _text sometimes.
@@ -561,12 +560,15 @@ static int __cmd_record(int argc, const char **argv)
 	if (!file_new) {
 		err = perf_header__read(session, output);
 		if (err < 0)
-			return err;
+			goto out_delete_session;
 	}
 
 	if (have_tracepoints(attrs, nr_counters))
 		perf_header__set_feat(&session->header, HEADER_TRACE_INFO);
 
+	/*
+ 	 * perf_session__delete(session) will be called at atexit_header()
+	 */
 	atexit(atexit_header);
 
 	if (forks) {
@@ -622,10 +624,15 @@ static int __cmd_record(int argc, const char **argv)
 		close(child_ready_pipe[0]);
 	}
 
-	if ((!system_wide && no_inherit) || profile_cpu != -1) {
-		open_counters(profile_cpu);
+	nr_cpus = read_cpu_map(cpu_list);
+	if (nr_cpus < 1) {
+		perror("failed to collect number of CPUs\n");
+		return -1;
+	}
+
+	if (!system_wide && no_inherit && !cpu_list) {
+		open_counters(-1);
 	} else {
-		nr_cpus = read_cpu_map();
 		for (i = 0; i < nr_cpus; i++)
 			open_counters(cpumap[i]);
 	}
@@ -704,7 +711,7 @@ static int __cmd_record(int argc, const char **argv)
 	if (perf_guest)
 		perf_session__process_machines(session, event__synthesize_guest_os);
 
-	if (!system_wide && profile_cpu == -1)
+	if (!system_wide)
 		event__synthesize_thread(target_tid, process_synthesized_event,
 					 session);
 	else
@@ -766,6 +773,10 @@ static int __cmd_record(int argc, const char **argv)
 		bytes_written / 24);
 
 	return 0;
+
+out_delete_session:
+	perf_session__delete(session);
+	return err;
 }
 
 static const char * const record_usage[] = {
@@ -794,8 +805,8 @@ static const struct option options[] = {
 			    "system-wide collection from all CPUs"),
 	OPT_BOOLEAN('A', "append", &append_file,
 			    "append to the output file to do incremental profiling"),
-	OPT_INTEGER('C', "profile_cpu", &profile_cpu,
-			    "CPU to profile on"),
+	OPT_STRING('C', "cpu", &cpu_list, "cpu",
+		    "list of cpus to monitor"),
 	OPT_BOOLEAN('f', "force", &force,
 			"overwrite existing data file (deprecated)"),
 	OPT_U64('c', "count", &user_interval, "event period to sample"),
@@ -815,17 +826,19 @@ static const struct option options[] = {
 		    "Sample addresses"),
 	OPT_BOOLEAN('n', "no-samples", &no_samples,
 		    "don't sample"),
+	OPT_BOOLEAN('N', "no-buildid-cache", &no_buildid,
+		    "do not update the buildid cache"),
 	OPT_END()
 };
 
 int cmd_record(int argc, const char **argv, const char *prefix __used)
 {
-	int i,j;
+	int i, j, err = -ENOMEM;
 
 	argc = parse_options(argc, argv, options, record_usage,
 			    PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc && target_pid == -1 && target_tid == -1 &&
-		!system_wide && profile_cpu == -1)
+		!system_wide && !cpu_list)
 		usage_with_options(record_usage, options);
 
 	if (force && append_file) {
@@ -839,6 +852,8 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 	}
 
 	symbol__init();
+	if (no_buildid)
+		disable_buildid_cache();
 
 	if (!nr_counters) {
 		nr_counters	= 1;
@@ -857,7 +872,7 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 	} else {
 		all_tids=malloc(sizeof(pid_t));
 		if (!all_tids)
-			return -ENOMEM;
+			goto out_symbol_exit;
 
 		all_tids[0] = target_tid;
 		thread_num = 1;
@@ -867,13 +882,13 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 		for (j = 0; j < MAX_COUNTERS; j++) {
 			fd[i][j] = malloc(sizeof(int)*thread_num);
 			if (!fd[i][j])
-				return -ENOMEM;
+				goto out_free_fd;
 		}
 	}
 	event_array = malloc(
 		sizeof(struct pollfd)*MAX_NR_CPUS*MAX_COUNTERS*thread_num);
 	if (!event_array)
-		return -ENOMEM;
+		goto out_free_fd;
 
 	if (user_interval != ULLONG_MAX)
 		default_interval = user_interval;
@@ -889,8 +904,22 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 		default_interval = freq;
 	} else {
 		fprintf(stderr, "frequency and count are zero, aborting\n");
-		exit(EXIT_FAILURE);
+		err = -EINVAL;
+		goto out_free_event_array;
 	}
 
-	return __cmd_record(argc, argv);
+	err = __cmd_record(argc, argv);
+
+out_free_event_array:
+	free(event_array);
+out_free_fd:
+	for (i = 0; i < MAX_NR_CPUS; i++) {
+		for (j = 0; j < MAX_COUNTERS; j++)
+			free(fd[i][j]);
+	}
+	free(all_tids);
+	all_tids = NULL;
+out_symbol_exit:
+	symbol__exit();
+	return err;
 }
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index fd7407c7205..2f4b92925b2 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -155,30 +155,7 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	struct addr_location al;
 	struct perf_event_attr *attr;
 
-	event__parse_sample(event, session->sample_type, &data);
-
-	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
-		    data.pid, data.tid, data.ip, data.period);
-
-	if (session->sample_type & PERF_SAMPLE_CALLCHAIN) {
-		unsigned int i;
-
-		dump_printf("... chain: nr:%Lu\n", data.callchain->nr);
-
-		if (!ip_callchain__valid(data.callchain, event)) {
-			pr_debug("call-chain problem with event, "
-				 "skipping it.\n");
-			return 0;
-		}
-
-		if (dump_trace) {
-			for (i = 0; i < data.callchain->nr; i++)
-				dump_printf("..... %2d: %016Lx\n",
-					    i, data.callchain->ips[i]);
-		}
-	}
-
-	if (event__preprocess_sample(event, session, &al, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
 		fprintf(stderr, "problem processing %d event, skipping it.\n",
 			event->header.type);
 		return -1;
@@ -464,8 +441,6 @@ static const struct option options[] = {
 		   "pretty printing style key: normal raw"),
 	OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
 		   "sort by key(s): pid, comm, dso, symbol, parent"),
-	OPT_BOOLEAN('P', "full-paths", &symbol_conf.full_paths,
-		    "Don't shorten the pathnames taking into account the cwd"),
 	OPT_BOOLEAN(0, "showcpuutilization", &symbol_conf.show_cpu_utilization,
 		    "Show sample percentage for different cpu modes"),
 	OPT_STRING('p', "parent", &parent_pattern, "regex",
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 9a39ca3c3ac..a6b4d44f950 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -69,7 +69,7 @@ static struct perf_event_attr default_attrs[] = {
 };
 
 static bool			system_wide			=  false;
-static unsigned int		nr_cpus				=  0;
+static int			nr_cpus				=  0;
 static int			run_idx				=  0;
 
 static int			run_count			=  1;
@@ -82,6 +82,7 @@ static int			thread_num			=  0;
 static pid_t			child_pid			= -1;
 static bool			null_run			=  false;
 static bool			big_num				=  false;
+static const char		*cpu_list;
 
 
 static int			*fd[MAX_NR_CPUS][MAX_COUNTERS];
@@ -158,7 +159,7 @@ static int create_perf_stat_counter(int counter)
 				    PERF_FORMAT_TOTAL_TIME_RUNNING;
 
 	if (system_wide) {
-		unsigned int cpu;
+		int cpu;
 
 		for (cpu = 0; cpu < nr_cpus; cpu++) {
 			fd[cpu][counter][0] = sys_perf_event_open(attr,
@@ -208,7 +209,7 @@ static inline int nsec_counter(int counter)
 static void read_counter(int counter)
 {
 	u64 count[3], single_count[3];
-	unsigned int cpu;
+	int cpu;
 	size_t res, nv;
 	int scaled;
 	int i, thread;
@@ -542,6 +543,8 @@ static const struct option options[] = {
 		    "null run - dont start any counters"),
 	OPT_BOOLEAN('B', "big-num", &big_num,
 		    "print large numbers with thousands\' separators"),
+	OPT_STRING('C', "cpu", &cpu_list, "cpu",
+		    "list of cpus to monitor in system-wide"),
 	OPT_END()
 };
 
@@ -566,10 +569,13 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 	}
 
 	if (system_wide)
-		nr_cpus = read_cpu_map();
+		nr_cpus = read_cpu_map(cpu_list);
 	else
 		nr_cpus = 1;
 
+	if (nr_cpus < 1)
+		usage_with_options(stat_usage, options);
+
 	if (target_pid != -1) {
 		target_tid = target_pid;
 		thread_num = find_all_tid(target_pid, &all_tids);
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index a66f4272b99..b513e40974f 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -102,6 +102,7 @@ struct sym_entry		*sym_filter_entry_sched		=   NULL;
 static int			sym_pcnt_filter			=      5;
 static int			sym_counter			=      0;
 static int			display_weighted		=     -1;
+static const char		*cpu_list;
 
 /*
  * Symbols
@@ -982,6 +983,7 @@ static void event__process_sample(const event_t *self,
 	u64 ip = self->ip.ip;
 	struct sym_entry *syme;
 	struct addr_location al;
+	struct sample_data data;
 	struct machine *machine;
 	u8 origin = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 
@@ -1024,7 +1026,8 @@ static void event__process_sample(const event_t *self,
 	if (self->header.misc & PERF_RECORD_MISC_EXACT_IP)
 		exact_samples++;
 
-	if (event__preprocess_sample(self, session, &al, symbol_filter) < 0 ||
+	if (event__preprocess_sample(self, session, &al, &data,
+				     symbol_filter) < 0 ||
 	    al.filtered)
 		return;
 
@@ -1079,26 +1082,6 @@ static void event__process_sample(const event_t *self,
 	}
 }
 
-static int event__process(event_t *event, struct perf_session *session)
-{
-	switch (event->header.type) {
-	case PERF_RECORD_COMM:
-		event__process_comm(event, session);
-		break;
-	case PERF_RECORD_MMAP:
-		event__process_mmap(event, session);
-		break;
-	case PERF_RECORD_FORK:
-	case PERF_RECORD_EXIT:
-		event__process_task(event, session);
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
 struct mmap_data {
 	int			counter;
 	void			*base;
@@ -1351,8 +1334,8 @@ static const struct option options[] = {
 		    "profile events on existing thread id"),
 	OPT_BOOLEAN('a', "all-cpus", &system_wide,
 			    "system-wide collection from all CPUs"),
-	OPT_INTEGER('C', "CPU", &profile_cpu,
-		    "CPU to profile on"),
+	OPT_STRING('C', "cpu", &cpu_list, "cpu",
+		    "list of cpus to monitor"),
 	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
 		   "file", "vmlinux pathname"),
 	OPT_BOOLEAN('K', "hide_kernel_symbols", &hide_kernel_symbols,
@@ -1428,10 +1411,10 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		return -ENOMEM;
 
 	/* CPU and PID are mutually exclusive */
-	if (target_tid > 0 && profile_cpu != -1) {
+	if (target_tid > 0 && cpu_list) {
 		printf("WARNING: PID switch overriding CPU\n");
 		sleep(1);
-		profile_cpu = -1;
+		cpu_list = NULL;
 	}
 
 	if (!nr_counters)
@@ -1469,10 +1452,13 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		attrs[counter].sample_period = default_interval;
 	}
 
-	if (target_tid != -1 || profile_cpu != -1)
+	if (target_tid != -1)
 		nr_cpus = 1;
 	else
-		nr_cpus = read_cpu_map();
+		nr_cpus = read_cpu_map(cpu_list);
+
+	if (nr_cpus < 1)
+		usage_with_options(top_usage, options);
 
 	get_term_dimensions(&winsize);
 	if (print_entries == 0) {
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index dddf3f01b5a..294da725a57 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -11,8 +11,9 @@
 
 static char const		*script_name;
 static char const		*generate_script_lang;
-static bool			debug_ordering;
+static bool			debug_mode;
 static u64			last_timestamp;
+static u64			nr_unordered;
 
 static int default_start_script(const char *script __unused,
 				int argc __unused,
@@ -91,13 +92,15 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	}
 
 	if (session->sample_type & PERF_SAMPLE_RAW) {
-		if (debug_ordering) {
+		if (debug_mode) {
 			if (data.time < last_timestamp) {
 				pr_err("Samples misordered, previous: %llu "
 					"this: %llu\n", last_timestamp,
 					data.time);
+				nr_unordered++;
 			}
 			last_timestamp = data.time;
+			return 0;
 		}
 		/*
 		 * FIXME: better resolve from pid from the struct trace_entry
@@ -113,6 +116,15 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	return 0;
 }
 
+static u64 nr_lost;
+
+static int process_lost_event(event_t *event, struct perf_session *session __used)
+{
+	nr_lost += event->lost.lost;
+
+	return 0;
+}
+
 static struct perf_event_ops event_ops = {
 	.sample	= process_sample_event,
 	.comm	= event__process_comm,
@@ -120,6 +132,7 @@ static struct perf_event_ops event_ops = {
 	.event_type = event__process_event_type,
 	.tracing_data = event__process_tracing_data,
 	.build_id = event__process_build_id,
+	.lost = process_lost_event,
 	.ordered_samples = true,
 };
 
@@ -132,9 +145,18 @@ static void sig_handler(int sig __unused)
 
 static int __cmd_trace(struct perf_session *session)
 {
+	int ret;
+
 	signal(SIGINT, sig_handler);
 
-	return perf_session__process_events(session, &event_ops);
+	ret = perf_session__process_events(session, &event_ops);
+
+	if (debug_mode) {
+		pr_err("Misordered timestamps: %llu\n", nr_unordered);
+		pr_err("Lost events: %llu\n", nr_lost);
+	}
+
+	return ret;
 }
 
 struct script_spec {
@@ -544,8 +566,8 @@ static const struct option options[] = {
 		   "generate perf-trace.xx script in specified language"),
 	OPT_STRING('i', "input", &input_name, "file",
 		    "input file name"),
-	OPT_BOOLEAN('d', "debug-ordering", &debug_ordering,
-		   "check that samples time ordering is monotonic"),
+	OPT_BOOLEAN('d', "debug-mode", &debug_mode,
+		   "do various checks like samples ordering and lost events"),
 
 	OPT_END()
 };
diff --git a/tools/perf/feature-tests.mak b/tools/perf/feature-tests.mak
new file mode 100644
index 00000000000..ddb68e601f0
--- /dev/null
+++ b/tools/perf/feature-tests.mak
@@ -0,0 +1,119 @@
+define SOURCE_HELLO
+#include <stdio.h>
+int main(void)
+{
+	return puts(\"hi\");
+}
+endef
+
+ifndef NO_DWARF
+define SOURCE_DWARF
+#include <dwarf.h>
+#include <libdw.h>
+#include <version.h>
+#ifndef _ELFUTILS_PREREQ
+#error
+#endif
+
+int main(void)
+{
+	Dwarf *dbg = dwarf_begin(0, DWARF_C_READ);
+	return (long)dbg;
+}
+endef
+endif
+
+define SOURCE_LIBELF
+#include <libelf.h>
+
+int main(void)
+{
+	Elf *elf = elf_begin(0, ELF_C_READ, 0);
+	return (long)elf;
+}
+endef
+
+define SOURCE_GLIBC
+#include <gnu/libc-version.h>
+
+int main(void)
+{
+	const char *version = gnu_get_libc_version();
+	return (long)version;
+}
+endef
+
+define SOURCE_ELF_MMAP
+#include <libelf.h>
+int main(void)
+{
+	Elf *elf = elf_begin(0, ELF_C_READ_MMAP, 0);
+	return (long)elf;
+}
+endef
+
+ifndef NO_NEWT
+define SOURCE_NEWT
+#include <newt.h>
+
+int main(void)
+{
+	newtInit();
+	newtCls();
+	return newtFinished();
+}
+endef
+endif
+
+ifndef NO_LIBPERL
+define SOURCE_PERL_EMBED
+#include <EXTERN.h>
+#include <perl.h>
+
+int main(void)
+{
+perl_alloc();
+return 0;
+}
+endef
+endif
+
+ifndef NO_LIBPYTHON
+define SOURCE_PYTHON_EMBED
+#include <Python.h>
+
+int main(void)
+{
+	Py_Initialize();
+	return 0;
+}
+endef
+endif
+
+define SOURCE_BFD
+#include <bfd.h>
+
+int main(void)
+{
+	bfd_demangle(0, 0, 0);
+	return 0;
+}
+endef
+
+define SOURCE_CPLUS_DEMANGLE
+extern char *cplus_demangle(const char *, int);
+
+int main(void)
+{
+	cplus_demangle(0, 0);
+	return 0;
+}
+endef
+
+# try-cc
+# Usage: option = $(call try-cc, source-to-build, cc-options)
+try-cc = $(shell sh -c						  \
+	'TMP="$(TMPOUT).$$$$";			 		  \
+	 echo "$(1)" |						  \
+	 $(CC) -x c - $(2) -o "$$TMP" > /dev/null 2>&1 && echo y; \
+	 rm -f "$$TMP"')
diff --git a/tools/perf/perf-archive.sh b/tools/perf/perf-archive.sh
index 2e7a4f417e2..677e59d62a8 100644
--- a/tools/perf/perf-archive.sh
+++ b/tools/perf/perf-archive.sh
@@ -7,7 +7,17 @@ if [ $# -ne 0 ] ; then
 	PERF_DATA=$1
 fi
 
-DEBUGDIR=~/.debug/
+#
+# PERF_BUILDID_DIR environment variable set by perf
+# path to buildid directory, default to $HOME/.debug
+#
+if [ -z $PERF_BUILDID_DIR ]; then
+	PERF_BUILDID_DIR=~/.debug/
+else
+        # append / to make substitutions work
+        PERF_BUILDID_DIR=$PERF_BUILDID_DIR/
+fi
+
 BUILDIDS=$(mktemp /tmp/perf-archive-buildids.XXXXXX)
 NOBUILDID=0000000000000000000000000000000000000000
 
@@ -22,13 +32,13 @@ MANIFEST=$(mktemp /tmp/perf-archive-manifest.XXXXXX)
 
 cut -d ' ' -f 1 $BUILDIDS | \
 while read build_id ; do
-	linkname=$DEBUGDIR.build-id/${build_id:0:2}/${build_id:2}
+	linkname=$PERF_BUILDID_DIR.build-id/${build_id:0:2}/${build_id:2}
 	filename=$(readlink -f $linkname)
-	echo ${linkname#$DEBUGDIR} >> $MANIFEST
-	echo ${filename#$DEBUGDIR} >> $MANIFEST
+	echo ${linkname#$PERF_BUILDID_DIR} >> $MANIFEST
+	echo ${filename#$PERF_BUILDID_DIR} >> $MANIFEST
 done
 
-tar cfj $PERF_DATA.tar.bz2 -C $DEBUGDIR -T $MANIFEST
+tar cfj $PERF_DATA.tar.bz2 -C $PERF_BUILDID_DIR -T $MANIFEST
 rm -f $MANIFEST $BUILDIDS
 echo -e "Now please run:\n"
 echo -e "$ tar xvf $PERF_DATA.tar.bz2 -C ~/.debug\n"
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 6e487119113..cdd6c03f1e1 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -458,6 +458,8 @@ int main(int argc, const char **argv)
 	handle_options(&argv, &argc, NULL);
 	commit_pager_choice();
 	set_debugfs_path();
+	set_buildid_dir();
+
 	if (argc > 0) {
 		if (!prefixcmp(argv[0], "--"))
 			argv[0] += 2;
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
index 1dc464ee2ca..aad7525bca1 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
@@ -89,3 +89,33 @@ def trace_flag_str(value):
 	    value &= ~idx
 
     return string
+
+
+def taskState(state):
+	states = {
+		0 : "R",
+		1 : "S",
+		2 : "D",
+		64: "DEAD"
+	}
+
+	if state not in states:
+		return "Unknown"
+
+	return states[state]
+
+
+class EventHeaders:
+	def __init__(self, common_cpu, common_secs, common_nsecs,
+		     common_pid, common_comm):
+		self.cpu = common_cpu
+		self.secs = common_secs
+		self.nsecs = common_nsecs
+		self.pid = common_pid
+		self.comm = common_comm
+
+	def ts(self):
+		return (self.secs * (10 ** 9)) + self.nsecs
+
+	def ts_format(self):
+		return "%d.%d" % (self.secs, int(self.nsecs / 1000))
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
new file mode 100644
index 00000000000..ae9a56e43e0
--- /dev/null
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
@@ -0,0 +1,184 @@
+# SchedGui.py - Python extension for perf trace, basic GUI code for
+#		traces drawing and overview.
+#
+# Copyright (C) 2010 by Frederic Weisbecker <fweisbec@gmail.com>
+#
+# This software is distributed under the terms of the GNU General
+# Public License ("GPL") version 2 as published by the Free Software
+# Foundation.
+
+
+try:
+	import wx
+except ImportError:
+	raise ImportError, "You need to install the wxpython lib for this script"
+
+
+class RootFrame(wx.Frame):
+	Y_OFFSET = 100
+	RECT_HEIGHT = 100
+	RECT_SPACE = 50
+	EVENT_MARKING_WIDTH = 5
+
+	def __init__(self, sched_tracer, title, parent = None, id = -1):
+		wx.Frame.__init__(self, parent, id, title)
+
+		(self.screen_width, self.screen_height) = wx.GetDisplaySize()
+		self.screen_width -= 10
+		self.screen_height -= 10
+		self.zoom = 0.5
+		self.scroll_scale = 20
+		self.sched_tracer = sched_tracer
+		self.sched_tracer.set_root_win(self)
+		(self.ts_start, self.ts_end) = sched_tracer.interval()
+		self.update_width_virtual()
+		self.nr_rects = sched_tracer.nr_rectangles() + 1
+		self.height_virtual = RootFrame.Y_OFFSET + (self.nr_rects * (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE))
+
+		# whole window panel
+		self.panel = wx.Panel(self, size=(self.screen_width, self.screen_height))
+
+		# scrollable container
+		self.scroll = wx.ScrolledWindow(self.panel)
+		self.scroll.SetScrollbars(self.scroll_scale, self.scroll_scale, self.width_virtual / self.scroll_scale, self.height_virtual / self.scroll_scale)
+		self.scroll.EnableScrolling(True, True)
+		self.scroll.SetFocus()
+
+		# scrollable drawing area
+		self.scroll_panel = wx.Panel(self.scroll, size=(self.screen_width - 15, self.screen_height / 2))
+		self.scroll_panel.Bind(wx.EVT_PAINT, self.on_paint)
+		self.scroll_panel.Bind(wx.EVT_KEY_DOWN, self.on_key_press)
+		self.scroll_panel.Bind(wx.EVT_LEFT_DOWN, self.on_mouse_down)
+		self.scroll.Bind(wx.EVT_PAINT, self.on_paint)
+		self.scroll.Bind(wx.EVT_KEY_DOWN, self.on_key_press)
+		self.scroll.Bind(wx.EVT_LEFT_DOWN, self.on_mouse_down)
+
+		self.scroll.Fit()
+		self.Fit()
+
+		self.scroll_panel.SetDimensions(-1, -1, self.width_virtual, self.height_virtual, wx.SIZE_USE_EXISTING)
+
+		self.txt = None
+
+		self.Show(True)
+
+	def us_to_px(self, val):
+		return val / (10 ** 3) * self.zoom
+
+	def px_to_us(self, val):
+		return (val / self.zoom) * (10 ** 3)
+
+	def scroll_start(self):
+		(x, y) = self.scroll.GetViewStart()
+		return (x * self.scroll_scale, y * self.scroll_scale)
+
+	def scroll_start_us(self):
+		(x, y) = self.scroll_start()
+		return self.px_to_us(x)
+
+	def paint_rectangle_zone(self, nr, color, top_color, start, end):
+		offset_px = self.us_to_px(start - self.ts_start)
+		width_px = self.us_to_px(end - self.ts_start)
+
+		offset_py = RootFrame.Y_OFFSET + (nr * (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE))
+		width_py = RootFrame.RECT_HEIGHT
+
+		dc = self.dc
+
+		if top_color is not None:
+			(r, g, b) = top_color
+			top_color = wx.Colour(r, g, b)
+			brush = wx.Brush(top_color, wx.SOLID)
+			dc.SetBrush(brush)
+			dc.DrawRectangle(offset_px, offset_py, width_px, RootFrame.EVENT_MARKING_WIDTH)
+			width_py -= RootFrame.EVENT_MARKING_WIDTH
+			offset_py += RootFrame.EVENT_MARKING_WIDTH
+
+		(r ,g, b) = color
+		color = wx.Colour(r, g, b)
+		brush = wx.Brush(color, wx.SOLID)
+		dc.SetBrush(brush)
+		dc.DrawRectangle(offset_px, offset_py, width_px, width_py)
+
+	def update_rectangles(self, dc, start, end):
+		start += self.ts_start
+		end += self.ts_start
+		self.sched_tracer.fill_zone(start, end)
+
+	def on_paint(self, event):
+		dc = wx.PaintDC(self.scroll_panel)
+		self.dc = dc
+
+		width = min(self.width_virtual, self.screen_width)
+		(x, y) = self.scroll_start()
+		start = self.px_to_us(x)
+		end = self.px_to_us(x + width)
+		self.update_rectangles(dc, start, end)
+
+	def rect_from_ypixel(self, y):
+		y -= RootFrame.Y_OFFSET
+		rect = y / (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE)
+		height = y % (RootFrame.RECT_HEIGHT + RootFrame.RECT_SPACE)
+
+		if rect < 0 or rect > self.nr_rects - 1 or height > RootFrame.RECT_HEIGHT:
+			return -1
+
+		return rect
+
+	def update_summary(self, txt):
+		if self.txt:
+			self.txt.Destroy()
+		self.txt = wx.StaticText(self.panel, -1, txt, (0, (self.screen_height / 2) + 50))
+
+
+	def on_mouse_down(self, event):
+		(x, y) = event.GetPositionTuple()
+		rect = self.rect_from_ypixel(y)
+		if rect == -1:
+			return
+
+		t = self.px_to_us(x) + self.ts_start
+
+		self.sched_tracer.mouse_down(rect, t)
+
+
+	def update_width_virtual(self):
+		self.width_virtual = self.us_to_px(self.ts_end - self.ts_start)
+
+	def __zoom(self, x):
+		self.update_width_virtual()
+		(xpos, ypos) = self.scroll.GetViewStart()
+		xpos = self.us_to_px(x) / self.scroll_scale
+		self.scroll.SetScrollbars(self.scroll_scale, self.scroll_scale, self.width_virtual / self.scroll_scale, self.height_virtual / self.scroll_scale, xpos, ypos)
+		self.Refresh()
+
+	def zoom_in(self):
+		x = self.scroll_start_us()
+		self.zoom *= 2
+		self.__zoom(x)
+
+	def zoom_out(self):
+		x = self.scroll_start_us()
+		self.zoom /= 2
+		self.__zoom(x)
+
+
+	def on_key_press(self, event):
+		key = event.GetRawKeyCode()
+		if key == ord("+"):
+			self.zoom_in()
+			return
+		if key == ord("-"):
+			self.zoom_out()
+			return
+
+		key = event.GetKeyCode()
+		(x, y) = self.scroll.GetViewStart()
+		if key == wx.WXK_RIGHT:
+			self.scroll.Scroll(x + 1, y)
+		elif key == wx.WXK_LEFT:
+			self.scroll.Scroll(x - 1, y)
+		elif key == wx.WXK_DOWN:
+			self.scroll.Scroll(x, y + 1)
+		elif key == wx.WXK_UP:
+			self.scroll.Scroll(x, y - 1)
diff --git a/tools/perf/scripts/python/bin/sched-migration-record b/tools/perf/scripts/python/bin/sched-migration-record
new file mode 100644
index 00000000000..17a3e9bd9e8
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sched-migration-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -m 16384 -a -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
diff --git a/tools/perf/scripts/python/bin/sched-migration-report b/tools/perf/scripts/python/bin/sched-migration-report
new file mode 100644
index 00000000000..61d05f72e44
--- /dev/null
+++ b/tools/perf/scripts/python/bin/sched-migration-report
@@ -0,0 +1,3 @@
+#!/bin/bash
+# description: sched migration overview
+perf trace $@ -s ~/libexec/perf-core/scripts/python/sched-migration.py
diff --git a/tools/perf/scripts/python/sched-migration.py b/tools/perf/scripts/python/sched-migration.py
new file mode 100644
index 00000000000..b934383c336
--- /dev/null
+++ b/tools/perf/scripts/python/sched-migration.py
@@ -0,0 +1,461 @@
+#!/usr/bin/python
+#
+# Cpu task migration overview toy
+#
+# Copyright (C) 2010 Frederic Weisbecker <fweisbec@gmail.com>
+#
+# perf trace event handlers have been generated by perf trace -g python
+#
+# This software is distributed under the terms of the GNU General
+# Public License ("GPL") version 2 as published by the Free Software
+# Foundation.
+
+
+import os
+import sys
+
+from collections import defaultdict
+from UserList import UserList
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+sys.path.append('scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+from perf_trace_context import *
+from Core import *
+from SchedGui import *
+
+
+threads = { 0 : "idle"}
+
+def thread_name(pid):
+	return "%s:%d" % (threads[pid], pid)
+
+class RunqueueEventUnknown:
+	@staticmethod
+	def color():
+		return None
+
+	def __repr__(self):
+		return "unknown"
+
+class RunqueueEventSleep:
+	@staticmethod
+	def color():
+		return (0, 0, 0xff)
+
+	def __init__(self, sleeper):
+		self.sleeper = sleeper
+
+	def __repr__(self):
+		return "%s gone to sleep" % thread_name(self.sleeper)
+
+class RunqueueEventWakeup:
+	@staticmethod
+	def color():
+		return (0xff, 0xff, 0)
+
+	def __init__(self, wakee):
+		self.wakee = wakee
+
+	def __repr__(self):
+		return "%s woke up" % thread_name(self.wakee)
+
+class RunqueueEventFork:
+	@staticmethod
+	def color():
+		return (0, 0xff, 0)
+
+	def __init__(self, child):
+		self.child = child
+
+	def __repr__(self):
+		return "new forked task %s" % thread_name(self.child)
+
+class RunqueueMigrateIn:
+	@staticmethod
+	def color():
+		return (0, 0xf0, 0xff)
+
+	def __init__(self, new):
+		self.new = new
+
+	def __repr__(self):
+		return "task migrated in %s" % thread_name(self.new)
+
+class RunqueueMigrateOut:
+	@staticmethod
+	def color():
+		return (0xff, 0, 0xff)
+
+	def __init__(self, old):
+		self.old = old
+
+	def __repr__(self):
+		return "task migrated out %s" % thread_name(self.old)
+
+class RunqueueSnapshot:
+	def __init__(self, tasks = [0], event = RunqueueEventUnknown()):
+		self.tasks = tuple(tasks)
+		self.event = event
+
+	def sched_switch(self, prev, prev_state, next):
+		event = RunqueueEventUnknown()
+
+		if taskState(prev_state) == "R" and next in self.tasks \
+			and prev in self.tasks:
+			return self
+
+		if taskState(prev_state) != "R":
+			event = RunqueueEventSleep(prev)
+
+		next_tasks = list(self.tasks[:])
+		if prev in self.tasks:
+			if taskState(prev_state) != "R":
+				next_tasks.remove(prev)
+		elif taskState(prev_state) == "R":
+			next_tasks.append(prev)
+
+		if next not in next_tasks:
+			next_tasks.append(next)
+
+		return RunqueueSnapshot(next_tasks, event)
+
+	def migrate_out(self, old):
+		if old not in self.tasks:
+			return self
+		next_tasks = [task for task in self.tasks if task != old]
+
+		return RunqueueSnapshot(next_tasks, RunqueueMigrateOut(old))
+
+	def __migrate_in(self, new, event):
+		if new in self.tasks:
+			self.event = event
+			return self
+		next_tasks = self.tasks[:] + tuple([new])
+
+		return RunqueueSnapshot(next_tasks, event)
+
+	def migrate_in(self, new):
+		return self.__migrate_in(new, RunqueueMigrateIn(new))
+
+	def wake_up(self, new):
+		return self.__migrate_in(new, RunqueueEventWakeup(new))
+
+	def wake_up_new(self, new):
+		return self.__migrate_in(new, RunqueueEventFork(new))
+
+	def load(self):
+		""" Provide the number of tasks on the runqueue.
+		    Don't count idle"""
+		return len(self.tasks) - 1
+
+	def __repr__(self):
+		ret = self.tasks.__repr__()
+		ret += self.origin_tostring()
+
+		return ret
+
+class TimeSlice:
+	def __init__(self, start, prev):
+		self.start = start
+		self.prev = prev
+		self.end = start
+		# cpus that triggered the event
+		self.event_cpus = []
+		if prev is not None:
+			self.total_load = prev.total_load
+			self.rqs = prev.rqs.copy()
+		else:
+			self.rqs = defaultdict(RunqueueSnapshot)
+			self.total_load = 0
+
+	def __update_total_load(self, old_rq, new_rq):
+		diff = new_rq.load() - old_rq.load()
+		self.total_load += diff
+
+	def sched_switch(self, ts_list, prev, prev_state, next, cpu):
+		old_rq = self.prev.rqs[cpu]
+		new_rq = old_rq.sched_switch(prev, prev_state, next)
+
+		if old_rq is new_rq:
+			return
+
+		self.rqs[cpu] = new_rq
+		self.__update_total_load(old_rq, new_rq)
+		ts_list.append(self)
+		self.event_cpus = [cpu]
+
+	def migrate(self, ts_list, new, old_cpu, new_cpu):
+		if old_cpu == new_cpu:
+			return
+		old_rq = self.prev.rqs[old_cpu]
+		out_rq = old_rq.migrate_out(new)
+		self.rqs[old_cpu] = out_rq
+		self.__update_total_load(old_rq, out_rq)
+
+		new_rq = self.prev.rqs[new_cpu]
+		in_rq = new_rq.migrate_in(new)
+		self.rqs[new_cpu] = in_rq
+		self.__update_total_load(new_rq, in_rq)
+
+		ts_list.append(self)
+
+		if old_rq is not out_rq:
+			self.event_cpus.append(old_cpu)
+		self.event_cpus.append(new_cpu)
+
+	def wake_up(self, ts_list, pid, cpu, fork):
+		old_rq = self.prev.rqs[cpu]
+		if fork:
+			new_rq = old_rq.wake_up_new(pid)
+		else:
+			new_rq = old_rq.wake_up(pid)
+
+		if new_rq is old_rq:
+			return
+		self.rqs[cpu] = new_rq
+		self.__update_total_load(old_rq, new_rq)
+		ts_list.append(self)
+		self.event_cpus = [cpu]
+
+	def next(self, t):
+		self.end = t
+		return TimeSlice(t, self)
+
+class TimeSliceList(UserList):
+	def __init__(self, arg = []):
+		self.data = arg
+
+	def get_time_slice(self, ts):
+		if len(self.data) == 0:
+			slice = TimeSlice(ts, TimeSlice(-1, None))
+		else:
+			slice = self.data[-1].next(ts)
+		return slice
+
+	def find_time_slice(self, ts):
+		start = 0
+		end = len(self.data)
+		found = -1
+		searching = True
+		while searching:
+			if start == end or start == end - 1:
+				searching = False
+
+			i = (end + start) / 2
+			if self.data[i].start <= ts and self.data[i].end >= ts:
+				found = i
+				end = i
+				continue
+
+			if self.data[i].end < ts:
+				start = i
+
+			elif self.data[i].start > ts:
+				end = i
+
+		return found
+
+	def set_root_win(self, win):
+		self.root_win = win
+
+	def mouse_down(self, cpu, t):
+		idx = self.find_time_slice(t)
+		if idx == -1:
+			return
+
+		ts = self[idx]
+		rq = ts.rqs[cpu]
+		raw = "CPU: %d\n" % cpu
+		raw += "Last event : %s\n" % rq.event.__repr__()
+		raw += "Timestamp : %d.%06d\n" % (ts.start / (10 ** 9), (ts.start % (10 ** 9)) / 1000)
+		raw += "Duration : %6d us\n" % ((ts.end - ts.start) / (10 ** 6))
+		raw += "Load = %d\n" % rq.load()
+		for t in rq.tasks:
+			raw += "%s \n" % thread_name(t)
+
+		self.root_win.update_summary(raw)
+
+	def update_rectangle_cpu(self, slice, cpu):
+		rq = slice.rqs[cpu]
+
+		if slice.total_load != 0:
+			load_rate = rq.load() / float(slice.total_load)
+		else:
+			load_rate = 0
+
+		red_power = int(0xff - (0xff * load_rate))
+		color = (0xff, red_power, red_power)
+
+		top_color = None
+
+		if cpu in slice.event_cpus:
+			top_color = rq.event.color()
+
+		self.root_win.paint_rectangle_zone(cpu, color, top_color, slice.start, slice.end)
+
+	def fill_zone(self, start, end):
+		i = self.find_time_slice(start)
+		if i == -1:
+			return
+
+		for i in xrange(i, len(self.data)):
+			timeslice = self.data[i]
+			if timeslice.start > end:
+				return
+
+			for cpu in timeslice.rqs:
+				self.update_rectangle_cpu(timeslice, cpu)
+
+	def interval(self):
+		if len(self.data) == 0:
+			return (0, 0)
+
+		return (self.data[0].start, self.data[-1].end)
+
+	def nr_rectangles(self):
+		last_ts = self.data[-1]
+		max_cpu = 0
+		for cpu in last_ts.rqs:
+			if cpu > max_cpu:
+				max_cpu = cpu
+		return max_cpu
+
+
+class SchedEventProxy:
+	def __init__(self):
+		self.current_tsk = defaultdict(lambda : -1)
+		self.timeslices = TimeSliceList()
+
+	def sched_switch(self, headers, prev_comm, prev_pid, prev_prio, prev_state,
+			 next_comm, next_pid, next_prio):
+		""" Ensure the task we sched out this cpu is really the one
+		    we logged. Otherwise we may have missed traces """
+
+		on_cpu_task = self.current_tsk[headers.cpu]
+
+		if on_cpu_task != -1 and on_cpu_task != prev_pid:
+			print "Sched switch event rejected ts: %s cpu: %d prev: %s(%d) next: %s(%d)" % \
+				(headers.ts_format(), headers.cpu, prev_comm, prev_pid, next_comm, next_pid)
+
+		threads[prev_pid] = prev_comm
+		threads[next_pid] = next_comm
+		self.current_tsk[headers.cpu] = next_pid
+
+		ts = self.timeslices.get_time_slice(headers.ts())
+		ts.sched_switch(self.timeslices, prev_pid, prev_state, next_pid, headers.cpu)
+
+	def migrate(self, headers, pid, prio, orig_cpu, dest_cpu):
+		ts = self.timeslices.get_time_slice(headers.ts())
+		ts.migrate(self.timeslices, pid, orig_cpu, dest_cpu)
+
+	def wake_up(self, headers, comm, pid, success, target_cpu, fork):
+		if success == 0:
+			return
+		ts = self.timeslices.get_time_slice(headers.ts())
+		ts.wake_up(self.timeslices, pid, target_cpu, fork)
+
+
+def trace_begin():
+	global parser
+	parser = SchedEventProxy()
+
+def trace_end():
+	app = wx.App(False)
+	timeslices = parser.timeslices
+	frame = RootFrame(timeslices, "Migration")
+	app.MainLoop()
+
+def sched__sched_stat_runtime(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, runtime, vruntime):
+	pass
+
+def sched__sched_stat_iowait(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, delay):
+	pass
+
+def sched__sched_stat_sleep(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, delay):
+	pass
+
+def sched__sched_stat_wait(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, delay):
+	pass
+
+def sched__sched_process_fork(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	parent_comm, parent_pid, child_comm, child_pid):
+	pass
+
+def sched__sched_process_wait(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio):
+	pass
+
+def sched__sched_process_exit(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio):
+	pass
+
+def sched__sched_process_free(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio):
+	pass
+
+def sched__sched_migrate_task(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio, orig_cpu,
+	dest_cpu):
+	headers = EventHeaders(common_cpu, common_secs, common_nsecs,
+				common_pid, common_comm)
+	parser.migrate(headers, pid, prio, orig_cpu, dest_cpu)
+
+def sched__sched_switch(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	prev_comm, prev_pid, prev_prio, prev_state,
+	next_comm, next_pid, next_prio):
+
+	headers = EventHeaders(common_cpu, common_secs, common_nsecs,
+				common_pid, common_comm)
+	parser.sched_switch(headers, prev_comm, prev_pid, prev_prio, prev_state,
+			 next_comm, next_pid, next_prio)
+
+def sched__sched_wakeup_new(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio, success,
+	target_cpu):
+	headers = EventHeaders(common_cpu, common_secs, common_nsecs,
+				common_pid, common_comm)
+	parser.wake_up(headers, comm, pid, success, target_cpu, 1)
+
+def sched__sched_wakeup(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio, success,
+	target_cpu):
+	headers = EventHeaders(common_cpu, common_secs, common_nsecs,
+				common_pid, common_comm)
+	parser.wake_up(headers, comm, pid, success, target_cpu, 0)
+
+def sched__sched_wait_task(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid, prio):
+	pass
+
+def sched__sched_kthread_stop_ret(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	ret):
+	pass
+
+def sched__sched_kthread_stop(event_name, context, common_cpu,
+	common_secs, common_nsecs, common_pid, common_comm,
+	comm, pid):
+	pass
+
+def trace_unhandled(event_name, context, common_cpu, common_secs, common_nsecs,
+		common_pid, common_comm):
+	pass
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index 70c5cf87d02..e437edb7241 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -12,6 +12,7 @@
 #include "event.h"
 #include "symbol.h"
 #include <linux/kernel.h>
+#include "debug.h"
 
 static int build_id__mark_dso_hit(event_t *event, struct perf_session *session)
 {
@@ -34,28 +35,43 @@ static int build_id__mark_dso_hit(event_t *event, struct perf_session *session)
 	return 0;
 }
 
+static int event__exit_del_thread(event_t *self, struct perf_session *session)
+{
+	struct thread *thread = perf_session__findnew(session, self->fork.tid);
+
+	dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
+		    self->fork.ppid, self->fork.ptid);
+
+	if (thread) {
+		rb_erase(&thread->rb_node, &session->threads);
+		session->last_match = NULL;
+		thread__delete(thread);
+	}
+
+	return 0;
+}
+
 struct perf_event_ops build_id__mark_dso_hit_ops = {
 	.sample	= build_id__mark_dso_hit,
 	.mmap	= event__process_mmap,
 	.fork	= event__process_task,
+	.exit	= event__exit_del_thread,
 };
 
 char *dso__build_id_filename(struct dso *self, char *bf, size_t size)
 {
 	char build_id_hex[BUILD_ID_SIZE * 2 + 1];
-	const char *home;
 
 	if (!self->has_build_id)
 		return NULL;
 
 	build_id__sprintf(self->build_id, sizeof(self->build_id), build_id_hex);
-	home = getenv("HOME");
 	if (bf == NULL) {
-		if (asprintf(&bf, "%s/%s/.build-id/%.2s/%s", home,
-			     DEBUG_CACHE_DIR, build_id_hex, build_id_hex + 2) < 0)
+		if (asprintf(&bf, "%s/.build-id/%.2s/%s", buildid_dir,
+			     build_id_hex, build_id_hex + 2) < 0)
 			return NULL;
 	} else
-		snprintf(bf, size, "%s/%s/.build-id/%.2s/%s", home,
-			 DEBUG_CACHE_DIR, build_id_hex, build_id_hex + 2);
+		snprintf(bf, size, "%s/.build-id/%.2s/%s", buildid_dir,
+			 build_id_hex, build_id_hex + 2);
 	return bf;
 }
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 65fe664fddf..27e9ebe4076 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -23,6 +23,7 @@ extern int perf_config(config_fn_t fn, void *);
 extern int perf_config_int(const char *, const char *);
 extern int perf_config_bool(const char *, const char *);
 extern int config_error_nonbool(const char *);
+extern const char *perf_config_dirname(const char *, const char *);
 
 /* pager.c */
 extern void setup_pager(void);
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 52c777e451e..f231f43424d 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -18,7 +18,7 @@
 #include "util.h"
 #include "callchain.h"
 
-bool ip_callchain__valid(struct ip_callchain *chain, event_t *event)
+bool ip_callchain__valid(struct ip_callchain *chain, const event_t *event)
 {
 	unsigned int chain_size = event->header.size;
 	chain_size -= (unsigned long)&event->ip.__more_data - (unsigned long)event;
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index f2e9ee164bd..624a96c636f 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -63,5 +63,5 @@ int register_callchain_param(struct callchain_param *param);
 int append_chain(struct callchain_node *root, struct ip_callchain *chain,
 		 struct map_symbol *syms, u64 period);
 
-bool ip_callchain__valid(struct ip_callchain *chain, event_t *event);
+bool ip_callchain__valid(struct ip_callchain *chain, const event_t *event);
 #endif	/* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index dabe892d0e5..e02d78cae70 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -11,6 +11,11 @@
 
 #define MAXNAME (256)
 
+#define DEBUG_CACHE_DIR ".debug"
+
+
+char buildid_dir[MAXPATHLEN]; /* root dir for buildid, binary cache */
+
 static FILE *config_file;
 static const char *config_file_name;
 static int config_linenr;
@@ -127,7 +132,7 @@ static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
 			break;
 		if (!iskeychar(c))
 			break;
-		name[len++] = tolower(c);
+		name[len++] = c;
 		if (len >= MAXNAME)
 			return -1;
 	}
@@ -327,6 +332,13 @@ int perf_config_bool(const char *name, const char *value)
 	return !!perf_config_bool_or_int(name, value, &discard);
 }
 
+const char *perf_config_dirname(const char *name, const char *value)
+{
+	if (!name)
+		return NULL;
+	return value;
+}
+
 static int perf_default_core_config(const char *var __used, const char *value __used)
 {
 	/* Add other config variables here and to Documentation/config.txt. */
@@ -428,3 +440,53 @@ int config_error_nonbool(const char *var)
 {
 	return error("Missing value for '%s'", var);
 }
+
+struct buildid_dir_config {
+	char *dir;
+};
+
+static int buildid_dir_command_config(const char *var, const char *value,
+				      void *data)
+{
+	struct buildid_dir_config *c = data;
+	const char *v;
+
+	/* same dir for all commands */
+	if (!prefixcmp(var, "buildid.") && !strcmp(var + 8, "dir")) {
+		v = perf_config_dirname(var, value);
+		if (!v)
+			return -1;
+		strncpy(c->dir, v, MAXPATHLEN-1);
+		c->dir[MAXPATHLEN-1] = '\0';
+	}
+	return 0;
+}
+
+static void check_buildid_dir_config(void)
+{
+	struct buildid_dir_config c;
+	c.dir = buildid_dir;
+	perf_config(buildid_dir_command_config, &c);
+}
+
+void set_buildid_dir(void)
+{
+	buildid_dir[0] = '\0';
+
+	/* try config file */
+	check_buildid_dir_config();
+
+	/* default to $HOME/.debug */
+	if (buildid_dir[0] == '\0') {
+		char *v = getenv("HOME");
+		if (v) {
+			snprintf(buildid_dir, MAXPATHLEN-1, "%s/%s",
+				 v, DEBUG_CACHE_DIR);
+		} else {
+			strncpy(buildid_dir, DEBUG_CACHE_DIR, MAXPATHLEN-1);
+		}
+		buildid_dir[MAXPATHLEN-1] = '\0';
+	}
+	/* for communicating with external commands */
+	setenv("PERF_BUILDID_DIR", buildid_dir, 1);
+}
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 4e01490e51e..0f9b8d7a7d7 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -20,7 +20,7 @@ static int default_cpu_map(void)
 	return nr_cpus;
 }
 
-int read_cpu_map(void)
+static int read_all_cpu_map(void)
 {
 	FILE *onlnf;
 	int nr_cpus = 0;
@@ -57,3 +57,58 @@ int read_cpu_map(void)
 
 	return default_cpu_map();
 }
+
+int read_cpu_map(const char *cpu_list)
+{
+	unsigned long start_cpu, end_cpu = 0;
+	char *p = NULL;
+	int i, nr_cpus = 0;
+
+	if (!cpu_list)
+		return read_all_cpu_map();
+
+	if (!isdigit(*cpu_list))
+		goto invalid;
+
+	while (isdigit(*cpu_list)) {
+		p = NULL;
+		start_cpu = strtoul(cpu_list, &p, 0);
+		if (start_cpu >= INT_MAX
+		    || (*p != '\0' && *p != ',' && *p != '-'))
+			goto invalid;
+
+		if (*p == '-') {
+			cpu_list = ++p;
+			p = NULL;
+			end_cpu = strtoul(cpu_list, &p, 0);
+
+			if (end_cpu >= INT_MAX || (*p != '\0' && *p != ','))
+				goto invalid;
+
+			if (end_cpu < start_cpu)
+				goto invalid;
+		} else {
+			end_cpu = start_cpu;
+		}
+
+		for (; start_cpu <= end_cpu; start_cpu++) {
+			/* check for duplicates */
+			for (i = 0; i < nr_cpus; i++)
+				if (cpumap[i] == (int)start_cpu)
+					goto invalid;
+
+			assert(nr_cpus < MAX_NR_CPUS);
+			cpumap[nr_cpus++] = (int)start_cpu;
+		}
+		if (*p)
+			++p;
+
+		cpu_list = p;
+	}
+	if (nr_cpus > 0)
+		return nr_cpus;
+
+	return default_cpu_map();
+invalid:
+	return -1;
+}
diff --git a/tools/perf/util/cpumap.h b/tools/perf/util/cpumap.h
index 86c78bb3309..3e60f56e490 100644
--- a/tools/perf/util/cpumap.h
+++ b/tools/perf/util/cpumap.h
@@ -1,7 +1,7 @@
 #ifndef __PERF_CPUMAP_H
 #define __PERF_CPUMAP_H
 
-extern int read_cpu_map(void);
+extern int read_cpu_map(const char *cpu_list);
 extern int cpumap[];
 
 #endif /* __PERF_CPUMAP_H */
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index 6cddff2bc97..318dab15d17 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -86,12 +86,10 @@ void trace_event(event_t *event)
 			dump_printf_color("  ", color);
 			for (j = 0; j < 15-(i & 15); j++)
 				dump_printf_color("   ", color);
-			for (j = 0; j < (i & 15); j++) {
-				if (isprint(raw_event[i-15+j]))
-					dump_printf_color("%c", color,
-							  raw_event[i-15+j]);
-				else
-					dump_printf_color(".", color);
+			for (j = i & ~15; j <= i; j++) {
+				dump_printf_color("%c", color,
+						isprint(raw_event[j]) ?
+						raw_event[j] : '.');
 			}
 			dump_printf_color("\n", color);
 		}
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 2fbf6a463c8..dab9e754a28 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -151,7 +151,6 @@ static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
 			continue;
 		pbf += n + 3;
 		if (*pbf == 'x') { /* vm_exec */
-			u64 vm_pgoff;
 			char *execname = strchr(bf, '/');
 
 			/* Catch VDSO */
@@ -162,12 +161,7 @@ static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
 				continue;
 
 			pbf += 3;
-			n = hex2u64(pbf, &vm_pgoff);
-			/* pgoff is in bytes, not pages */
-			if (n >= 0)
-				ev.mmap.pgoff = vm_pgoff << getpagesize();
-			else
-				ev.mmap.pgoff = 0;
+			n = hex2u64(pbf, &ev.mmap.pgoff);
 
 			size = strlen(execname);
 			execname[size - 1] = '\0'; /* Remove \n */
@@ -340,30 +334,29 @@ int event__synthesize_kernel_mmap(event__handler_t process,
 	return process(&ev, session);
 }
 
-static void thread__comm_adjust(struct thread *self)
+static void thread__comm_adjust(struct thread *self, struct hists *hists)
 {
 	char *comm = self->comm;
 
 	if (!symbol_conf.col_width_list_str && !symbol_conf.field_sep &&
 	    (!symbol_conf.comm_list ||
 	     strlist__has_entry(symbol_conf.comm_list, comm))) {
-		unsigned int slen = strlen(comm);
+		u16 slen = strlen(comm);
 
-		if (slen > comms__col_width) {
-			comms__col_width = slen;
-			threads__col_width = slen + 6;
-		}
+		if (hists__new_col_len(hists, HISTC_COMM, slen))
+			hists__set_col_len(hists, HISTC_THREAD, slen + 6);
 	}
 }
 
-static int thread__set_comm_adjust(struct thread *self, const char *comm)
+static int thread__set_comm_adjust(struct thread *self, const char *comm,
+				   struct hists *hists)
 {
 	int ret = thread__set_comm(self, comm);
 
 	if (ret)
 		return ret;
 
-	thread__comm_adjust(self);
+	thread__comm_adjust(self, hists);
 
 	return 0;
 }
@@ -374,7 +367,8 @@ int event__process_comm(event_t *self, struct perf_session *session)
 
 	dump_printf(": %s:%d\n", self->comm.comm, self->comm.tid);
 
-	if (thread == NULL || thread__set_comm_adjust(thread, self->comm.comm)) {
+	if (thread == NULL || thread__set_comm_adjust(thread, self->comm.comm,
+						      &session->hists)) {
 		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
 		return -1;
 	}
@@ -456,6 +450,7 @@ static int event__process_kernel_mmap(event_t *self,
 			goto out_problem;
 
 		map->dso->short_name = name;
+		map->dso->sname_alloc = 1;
 		map->end = map->start + self->mmap.len;
 	} else if (is_kernel_mmap) {
 		const char *symbol_name = (self->mmap.filename +
@@ -514,12 +509,13 @@ int event__process_mmap(event_t *self, struct perf_session *session)
 	if (machine == NULL)
 		goto out_problem;
 	thread = perf_session__findnew(session, self->mmap.pid);
+	if (thread == NULL)
+		goto out_problem;
 	map = map__new(&machine->user_dsos, self->mmap.start,
 			self->mmap.len, self->mmap.pgoff,
 			self->mmap.pid, self->mmap.filename,
-			MAP__FUNCTION, session->cwd, session->cwdlen);
-
-	if (thread == NULL || map == NULL)
+			MAP__FUNCTION);
+	if (map == NULL)
 		goto out_problem;
 
 	thread__insert_map(thread, map);
@@ -552,6 +548,26 @@ int event__process_task(event_t *self, struct perf_session *session)
 	return 0;
 }
 
+int event__process(event_t *event, struct perf_session *session)
+{
+	switch (event->header.type) {
+	case PERF_RECORD_COMM:
+		event__process_comm(event, session);
+		break;
+	case PERF_RECORD_MMAP:
+		event__process_mmap(event, session);
+		break;
+	case PERF_RECORD_FORK:
+	case PERF_RECORD_EXIT:
+		event__process_task(event, session);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 void thread__find_addr_map(struct thread *self,
 			   struct perf_session *session, u8 cpumode,
 			   enum map_type type, pid_t pid, u64 addr,
@@ -641,27 +657,49 @@ void thread__find_addr_location(struct thread *self,
 		al->sym = NULL;
 }
 
-static void dso__calc_col_width(struct dso *self)
+static void dso__calc_col_width(struct dso *self, struct hists *hists)
 {
 	if (!symbol_conf.col_width_list_str && !symbol_conf.field_sep &&
 	    (!symbol_conf.dso_list ||
 	     strlist__has_entry(symbol_conf.dso_list, self->name))) {
-		u16 slen = self->short_name_len;
-		if (verbose)
-			slen = self->long_name_len;
-		if (dsos__col_width < slen)
-			dsos__col_width = slen;
+		u16 slen = dso__name_len(self);
+		hists__new_col_len(hists, HISTC_DSO, slen);
 	}
 
 	self->slen_calculated = 1;
 }
 
 int event__preprocess_sample(const event_t *self, struct perf_session *session,
-			     struct addr_location *al, symbol_filter_t filter)
+			     struct addr_location *al, struct sample_data *data,
+			     symbol_filter_t filter)
 {
 	u8 cpumode = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
-	struct thread *thread = perf_session__findnew(session, self->ip.pid);
+	struct thread *thread;
 
+	event__parse_sample(self, session->sample_type, data);
+
+	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld cpu:%d\n",
+		    self->header.misc, data->pid, data->tid, data->ip,
+		    data->period, data->cpu);
+
+	if (session->sample_type & PERF_SAMPLE_CALLCHAIN) {
+		unsigned int i;
+
+		dump_printf("... chain: nr:%Lu\n", data->callchain->nr);
+
+		if (!ip_callchain__valid(data->callchain, self)) {
+			pr_debug("call-chain problem with event, "
+				 "skipping it.\n");
+			goto out_filtered;
+		}
+
+		if (dump_trace) {
+			for (i = 0; i < data->callchain->nr; i++)
+				dump_printf("..... %2d: %016Lx\n",
+					    i, data->callchain->ips[i]);
+		}
+	}
+	thread = perf_session__findnew(session, self->ip.pid);
 	if (thread == NULL)
 		return -1;
 
@@ -687,6 +725,7 @@ int event__preprocess_sample(const event_t *self, struct perf_session *session,
 		    al->map ? al->map->dso->long_name :
 			al->level == 'H' ? "[hypervisor]" : "<not found>");
 	al->sym = NULL;
+	al->cpu = data->cpu;
 
 	if (al->map) {
 		if (symbol_conf.dso_list &&
@@ -703,16 +742,17 @@ int event__preprocess_sample(const event_t *self, struct perf_session *session,
 		 * sampled.
 		 */
 		if (!sort_dso.elide && !al->map->dso->slen_calculated)
-			dso__calc_col_width(al->map->dso);
+			dso__calc_col_width(al->map->dso, &session->hists);
 
 		al->sym = map__find_symbol(al->map, al->addr, filter);
 	} else {
 		const unsigned int unresolved_col_width = BITS_PER_LONG / 4;
 
-		if (dsos__col_width < unresolved_col_width &&
+		if (hists__col_len(&session->hists, HISTC_DSO) < unresolved_col_width &&
 		    !symbol_conf.col_width_list_str && !symbol_conf.field_sep &&
 		    !symbol_conf.dso_list)
-			dsos__col_width = unresolved_col_width;
+			hists__set_col_len(&session->hists, HISTC_DSO,
+					   unresolved_col_width);
 	}
 
 	if (symbol_conf.sym_list && al->sym &&
@@ -726,9 +766,9 @@ out_filtered:
 	return 0;
 }
 
-int event__parse_sample(event_t *event, u64 type, struct sample_data *data)
+int event__parse_sample(const event_t *event, u64 type, struct sample_data *data)
 {
-	u64 *array = event->sample.array;
+	const u64 *array = event->sample.array;
 
 	if (type & PERF_SAMPLE_IP) {
 		data->ip = event->ip.ip;
@@ -767,7 +807,8 @@ int event__parse_sample(event_t *event, u64 type, struct sample_data *data)
 		u32 *p = (u32 *)array;
 		data->cpu = *p;
 		array++;
-	}
+	} else
+		data->cpu = -1;
 
 	if (type & PERF_SAMPLE_PERIOD) {
 		data->period = *array;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 8577085db06..8e790dae702 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -154,11 +154,13 @@ int event__process_comm(event_t *self, struct perf_session *session);
 int event__process_lost(event_t *self, struct perf_session *session);
 int event__process_mmap(event_t *self, struct perf_session *session);
 int event__process_task(event_t *self, struct perf_session *session);
+int event__process(event_t *event, struct perf_session *session);
 
 struct addr_location;
 int event__preprocess_sample(const event_t *self, struct perf_session *session,
-			     struct addr_location *al, symbol_filter_t filter);
-int event__parse_sample(event_t *event, u64 type, struct sample_data *data);
+			     struct addr_location *al, struct sample_data *data,
+			     symbol_filter_t filter);
+int event__parse_sample(const event_t *event, u64 type, struct sample_data *data);
 
 extern const char *event__name[];
 
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 1f62435f96c..d7e67b167ea 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -16,6 +16,8 @@
 #include "symbol.h"
 #include "debug.h"
 
+static bool no_buildid_cache = false;
+
 /*
  * Create new perf.data header attribute:
  */
@@ -385,8 +387,7 @@ static int perf_session__cache_build_ids(struct perf_session *self)
 	int ret;
 	char debugdir[PATH_MAX];
 
-	snprintf(debugdir, sizeof(debugdir), "%s/%s", getenv("HOME"),
-		 DEBUG_CACHE_DIR);
+	snprintf(debugdir, sizeof(debugdir), "%s", buildid_dir);
 
 	if (mkdir(debugdir, 0755) != 0 && errno != EEXIST)
 		return -1;
@@ -471,7 +472,8 @@ static int perf_header__adds_write(struct perf_header *self, int fd)
 		}
 		buildid_sec->size = lseek(fd, 0, SEEK_CUR) -
 					  buildid_sec->offset;
-		perf_session__cache_build_ids(session);
+		if (!no_buildid_cache)
+			perf_session__cache_build_ids(session);
 	}
 
 	lseek(fd, sec_start, SEEK_SET);
@@ -1190,3 +1192,8 @@ int event__process_build_id(event_t *self,
 				 session);
 	return 0;
 }
+
+void disable_buildid_cache(void)
+{
+	no_buildid_cache = true;
+}
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 784ee0bdda7..e7263d49bcf 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -5,11 +5,61 @@
 #include "sort.h"
 #include <math.h>
 
+enum hist_filter {
+	HIST_FILTER__DSO,
+	HIST_FILTER__THREAD,
+	HIST_FILTER__PARENT,
+};
+
 struct callchain_param	callchain_param = {
 	.mode	= CHAIN_GRAPH_REL,
 	.min_percent = 0.5
 };
 
+u16 hists__col_len(struct hists *self, enum hist_column col)
+{
+	return self->col_len[col];
+}
+
+void hists__set_col_len(struct hists *self, enum hist_column col, u16 len)
+{
+	self->col_len[col] = len;
+}
+
+bool hists__new_col_len(struct hists *self, enum hist_column col, u16 len)
+{
+	if (len > hists__col_len(self, col)) {
+		hists__set_col_len(self, col, len);
+		return true;
+	}
+	return false;
+}
+
+static void hists__reset_col_len(struct hists *self)
+{
+	enum hist_column col;
+
+	for (col = 0; col < HISTC_NR_COLS; ++col)
+		hists__set_col_len(self, col, 0);
+}
+
+static void hists__calc_col_len(struct hists *self, struct hist_entry *h)
+{
+	u16 len;
+
+	if (h->ms.sym)
+		hists__new_col_len(self, HISTC_SYMBOL, h->ms.sym->namelen);
+
+	len = thread__comm_len(h->thread);
+	if (hists__new_col_len(self, HISTC_COMM, len))
+		hists__set_col_len(self, HISTC_THREAD, len + 6);
+
+	if (h->ms.map) {
+		len = dso__name_len(h->ms.map->dso);
+		hists__new_col_len(self, HISTC_DSO, len);
+	}
+}
+
 static void hist_entry__add_cpumode_period(struct hist_entry *self,
 					   unsigned int cpumode, u64 period)
 {
@@ -43,6 +93,8 @@ static struct hist_entry *hist_entry__new(struct hist_entry *template)
 	if (self != NULL) {
 		*self = *template;
 		self->nr_events = 1;
+		if (self->ms.map)
+			self->ms.map->referenced = true;
 		if (symbol_conf.use_callchain)
 			callchain_init(self->callchain);
 	}
@@ -50,11 +102,19 @@ static struct hist_entry *hist_entry__new(struct hist_entry *template)
 	return self;
 }
 
-static void hists__inc_nr_entries(struct hists *self, struct hist_entry *entry)
+static void hists__inc_nr_entries(struct hists *self, struct hist_entry *h)
 {
-	if (entry->ms.sym && self->max_sym_namelen < entry->ms.sym->namelen)
-		self->max_sym_namelen = entry->ms.sym->namelen;
-	++self->nr_entries;
+	if (!h->filtered) {
+		hists__calc_col_len(self, h);
+		++self->nr_entries;
+	}
+}
+
+static u8 symbol__parent_filter(const struct symbol *parent)
+{
+	if (symbol_conf.exclude_other && parent == NULL)
+		return 1 << HIST_FILTER__PARENT;
+	return 0;
 }
 
 struct hist_entry *__hists__add_entry(struct hists *self,
@@ -70,10 +130,12 @@ struct hist_entry *__hists__add_entry(struct hists *self,
 			.map	= al->map,
 			.sym	= al->sym,
 		},
+		.cpu	= al->cpu,
 		.ip	= al->addr,
 		.level	= al->level,
 		.period	= period,
 		.parent = sym_parent,
+		.filtered = symbol__parent_filter(sym_parent),
 	};
 	int cmp;
 
@@ -191,7 +253,7 @@ void hists__collapse_resort(struct hists *self)
 	tmp = RB_ROOT;
 	next = rb_first(&self->entries);
 	self->nr_entries = 0;
-	self->max_sym_namelen = 0;
+	hists__reset_col_len(self);
 
 	while (next) {
 		n = rb_entry(next, struct hist_entry, rb_node);
@@ -248,7 +310,7 @@ void hists__output_resort(struct hists *self)
 	next = rb_first(&self->entries);
 
 	self->nr_entries = 0;
-	self->max_sym_namelen = 0;
+	hists__reset_col_len(self);
 
 	while (next) {
 		n = rb_entry(next, struct hist_entry, rb_node);
@@ -515,8 +577,9 @@ static size_t hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
 }
 
 int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size,
-			 struct hists *pair_hists, bool show_displacement,
-			 long displacement, bool color, u64 session_total)
+			 struct hists *hists, struct hists *pair_hists,
+			 bool show_displacement, long displacement,
+			 bool color, u64 session_total)
 {
 	struct sort_entry *se;
 	u64 period, total, period_sys, period_us, period_guest_sys, period_guest_us;
@@ -620,29 +683,25 @@ int hist_entry__snprintf(struct hist_entry *self, char *s, size_t size,
 
 		ret += snprintf(s + ret, size - ret, "%s", sep ?: "  ");
 		ret += se->se_snprintf(self, s + ret, size - ret,
-				       se->se_width ? *se->se_width : 0);
+				       hists__col_len(hists, se->se_width_idx));
 	}
 
 	return ret;
 }
 
-int hist_entry__fprintf(struct hist_entry *self, struct hists *pair_hists,
-			bool show_displacement, long displacement, FILE *fp,
-			u64 session_total)
+int hist_entry__fprintf(struct hist_entry *self, struct hists *hists,
+			struct hists *pair_hists, bool show_displacement,
+			long displacement, FILE *fp, u64 session_total)
 {
 	char bf[512];
-	int ret;
-
-	ret = hist_entry__snprintf(self, bf, sizeof(bf), pair_hists,
-				   show_displacement, displacement,
-				   true, session_total);
-	if (!ret)
-		return 0;
-
+	hist_entry__snprintf(self, bf, sizeof(bf), hists, pair_hists,
+			     show_displacement, displacement,
+			     true, session_total);
 	return fprintf(fp, "%s\n", bf);
 }
 
-static size_t hist_entry__fprintf_callchain(struct hist_entry *self, FILE *fp,
+static size_t hist_entry__fprintf_callchain(struct hist_entry *self,
+					    struct hists *hists, FILE *fp,
 					    u64 session_total)
 {
 	int left_margin = 0;
@@ -650,7 +709,7 @@ static size_t hist_entry__fprintf_callchain(struct hist_entry *self, FILE *fp,
 	if (sort__first_dimension == SORT_COMM) {
 		struct sort_entry *se = list_first_entry(&hist_entry__sort_list,
 							 typeof(*se), list);
-		left_margin = se->se_width ? *se->se_width : 0;
+		left_margin = hists__col_len(hists, se->se_width_idx);
 		left_margin -= thread__comm_len(self->thread);
 	}
 
@@ -721,17 +780,17 @@ size_t hists__fprintf(struct hists *self, struct hists *pair,
 			continue;
 		}
 		width = strlen(se->se_header);
-		if (se->se_width) {
-			if (symbol_conf.col_width_list_str) {
-				if (col_width) {
-					*se->se_width = atoi(col_width);
-					col_width = strchr(col_width, ',');
-					if (col_width)
-						++col_width;
-				}
+		if (symbol_conf.col_width_list_str) {
+			if (col_width) {
+				hists__set_col_len(self, se->se_width_idx,
+						   atoi(col_width));
+				col_width = strchr(col_width, ',');
+				if (col_width)
+					++col_width;
 			}
-			width = *se->se_width = max(*se->se_width, width);
 		}
+		if (!hists__new_col_len(self, se->se_width_idx, width))
+			width = hists__col_len(self, se->se_width_idx);
 		fprintf(fp, "  %*s", width, se->se_header);
 	}
 	fprintf(fp, "\n");
@@ -754,9 +813,8 @@ size_t hists__fprintf(struct hists *self, struct hists *pair,
 			continue;
 
 		fprintf(fp, "  ");
-		if (se->se_width)
-			width = *se->se_width;
-		else
+		width = hists__col_len(self, se->se_width_idx);
+		if (width == 0)
 			width = strlen(se->se_header);
 		for (i = 0; i < width; i++)
 			fprintf(fp, ".");
@@ -767,7 +825,6 @@ size_t hists__fprintf(struct hists *self, struct hists *pair,
 print_entries:
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
-		int cnt;
 
 		if (show_displacement) {
 			if (h->pair != NULL)
@@ -777,17 +834,12 @@ print_entries:
 				displacement = 0;
 			++position;
 		}
-		cnt = hist_entry__fprintf(h, pair, show_displacement,
-					  displacement, fp, self->stats.total_period);
-		/* Ignore those that didn't match the parent filter */
-		if (!cnt)
-			continue;
-
-		ret += cnt;
+		ret += hist_entry__fprintf(h, self, pair, show_displacement,
+					   displacement, fp, self->stats.total_period);
 
 		if (symbol_conf.use_callchain)
-			ret += hist_entry__fprintf_callchain(h, fp, self->stats.total_period);
-
+			ret += hist_entry__fprintf_callchain(h, self, fp,
+							     self->stats.total_period);
 		if (h->ms.map == NULL && verbose > 1) {
 			__map_groups__fprintf_maps(&h->thread->mg,
 						   MAP__FUNCTION, verbose, fp);
@@ -800,10 +852,49 @@ print_entries:
 	return ret;
 }
 
-enum hist_filter {
-	HIST_FILTER__DSO,
-	HIST_FILTER__THREAD,
-};
+/*
+ * See hists__fprintf to match the column widths
+ */
+unsigned int hists__sort_list_width(struct hists *self)
+{
+	struct sort_entry *se;
+	int ret = 9; /* total % */
+
+	if (symbol_conf.show_cpu_utilization) {
+		ret += 7; /* count_sys % */
+		ret += 6; /* count_us % */
+		if (perf_guest) {
+			ret += 13; /* count_guest_sys % */
+			ret += 12; /* count_guest_us % */
+		}
+	}
+
+	if (symbol_conf.show_nr_samples)
+		ret += 11;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list)
+		if (!se->elide)
+			ret += 2 + hists__col_len(self, se->se_width_idx);
+
+	return ret;
+}
+
+static void hists__remove_entry_filter(struct hists *self, struct hist_entry *h,
+				       enum hist_filter filter)
+{
+	h->filtered &= ~(1 << filter);
+	if (h->filtered)
+		return;
+
+	++self->nr_entries;
+	if (h->ms.unfolded)
+		self->nr_entries += h->nr_rows;
+	h->row_offset = 0;
+	self->stats.total_period += h->period;
+	self->stats.nr_events[PERF_RECORD_SAMPLE] += h->nr_events;
+
+	hists__calc_col_len(self, h);
+}
 
 void hists__filter_by_dso(struct hists *self, const struct dso *dso)
 {
@@ -811,7 +902,7 @@ void hists__filter_by_dso(struct hists *self, const struct dso *dso)
 
 	self->nr_entries = self->stats.total_period = 0;
 	self->stats.nr_events[PERF_RECORD_SAMPLE] = 0;
-	self->max_sym_namelen = 0;
+	hists__reset_col_len(self);
 
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
@@ -824,15 +915,7 @@ void hists__filter_by_dso(struct hists *self, const struct dso *dso)
 			continue;
 		}
 
-		h->filtered &= ~(1 << HIST_FILTER__DSO);
-		if (!h->filtered) {
-			++self->nr_entries;
-			self->stats.total_period += h->period;
-			self->stats.nr_events[PERF_RECORD_SAMPLE] += h->nr_events;
-			if (h->ms.sym &&
-			    self->max_sym_namelen < h->ms.sym->namelen)
-				self->max_sym_namelen = h->ms.sym->namelen;
-		}
+		hists__remove_entry_filter(self, h, HIST_FILTER__DSO);
 	}
 }
 
@@ -842,7 +925,7 @@ void hists__filter_by_thread(struct hists *self, const struct thread *thread)
 
 	self->nr_entries = self->stats.total_period = 0;
 	self->stats.nr_events[PERF_RECORD_SAMPLE] = 0;
-	self->max_sym_namelen = 0;
+	hists__reset_col_len(self);
 
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
@@ -851,15 +934,8 @@ void hists__filter_by_thread(struct hists *self, const struct thread *thread)
 			h->filtered |= (1 << HIST_FILTER__THREAD);
 			continue;
 		}
-		h->filtered &= ~(1 << HIST_FILTER__THREAD);
-		if (!h->filtered) {
-			++self->nr_entries;
-			self->stats.total_period += h->period;
-			self->stats.nr_events[PERF_RECORD_SAMPLE] += h->nr_events;
-			if (h->ms.sym &&
-			    self->max_sym_namelen < h->ms.sym->namelen)
-				self->max_sym_namelen = h->ms.sym->namelen;
-		}
+
+		hists__remove_entry_filter(self, h, HIST_FILTER__THREAD);
 	}
 }
 
@@ -1052,7 +1128,7 @@ fallback:
 		 dso, dso->long_name, sym, sym->name);
 
 	snprintf(command, sizeof(command),
-		 "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s|grep -v %s|expand",
+		 "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS -C %s|grep -v %s|expand",
 		 map__rip_2objdump(map, sym->start),
 		 map__rip_2objdump(map, sym->end),
 		 filename, filename);
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 83fa33a7b38..65a48db46a2 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -56,6 +56,16 @@ struct events_stats {
 	u32 nr_unknown_events;
 };
 
+enum hist_column {
+	HISTC_SYMBOL,
+	HISTC_DSO,
+	HISTC_THREAD,
+	HISTC_COMM,
+	HISTC_PARENT,
+	HISTC_CPU,
+	HISTC_NR_COLS, /* Last entry */
+};
+
 struct hists {
 	struct rb_node		rb_node;
 	struct rb_root		entries;
@@ -64,7 +74,7 @@ struct hists {
 	u64			config;
 	u64			event_stream;
 	u32			type;
-	u32			max_sym_namelen;
+	u16			col_len[HISTC_NR_COLS];
 };
 
 struct hist_entry *__hists__add_entry(struct hists *self,
@@ -72,12 +82,13 @@ struct hist_entry *__hists__add_entry(struct hists *self,
 				      struct symbol *parent, u64 period);
 extern int64_t hist_entry__cmp(struct hist_entry *, struct hist_entry *);
 extern int64_t hist_entry__collapse(struct hist_entry *, struct hist_entry *);
-int hist_entry__fprintf(struct hist_entry *self, struct hists *pair_hists,
-			bool show_displacement, long displacement, FILE *fp,
-			u64 total);
+int hist_entry__fprintf(struct hist_entry *self, struct hists *hists,
+			struct hists *pair_hists, bool show_displacement,
+			long displacement, FILE *fp, u64 total);
 int hist_entry__snprintf(struct hist_entry *self, char *bf, size_t size,
-			 struct hists *pair_hists, bool show_displacement,
-			 long displacement, bool color, u64 total);
+			 struct hists *hists, struct hists *pair_hists,
+			 bool show_displacement, long displacement,
+			 bool color, u64 total);
 void hist_entry__free(struct hist_entry *);
 
 void hists__output_resort(struct hists *self);
@@ -95,6 +106,10 @@ int hist_entry__annotate(struct hist_entry *self, struct list_head *head);
 void hists__filter_by_dso(struct hists *self, const struct dso *dso);
 void hists__filter_by_thread(struct hists *self, const struct thread *thread);
 
+u16 hists__col_len(struct hists *self, enum hist_column col);
+void hists__set_col_len(struct hists *self, enum hist_column col, u16 len);
+bool hists__new_col_len(struct hists *self, enum hist_column col, u16 len);
+
 #ifdef NO_NEWT_SUPPORT
 static inline int hists__browse(struct hists *self __used,
 				const char *helpline __used,
@@ -126,4 +141,7 @@ int hist_entry__tui_annotate(struct hist_entry *self);
 
 int hists__tui_browse_tree(struct rb_root *self, const char *help);
 #endif
+
+unsigned int hists__sort_list_width(struct hists *self);
+
 #endif	/* __PERF_HIST_H */
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index e672f2fef65..3a7eb6ec0ee 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -17,16 +17,6 @@ static inline int is_anon_memory(const char *filename)
 	return strcmp(filename, "//anon") == 0;
 }
 
-static int strcommon(const char *pathname, char *cwd, int cwdlen)
-{
-	int n = 0;
-
-	while (n < cwdlen && pathname[n] == cwd[n])
-		++n;
-
-	return n;
-}
-
 void map__init(struct map *self, enum map_type type,
 	       u64 start, u64 end, u64 pgoff, struct dso *dso)
 {
@@ -39,11 +29,12 @@ void map__init(struct map *self, enum map_type type,
 	self->unmap_ip = map__unmap_ip;
 	RB_CLEAR_NODE(&self->rb_node);
 	self->groups   = NULL;
+	self->referenced = false;
 }
 
 struct map *map__new(struct list_head *dsos__list, u64 start, u64 len,
 		     u64 pgoff, u32 pid, char *filename,
-		     enum map_type type, char *cwd, int cwdlen)
+		     enum map_type type)
 {
 	struct map *self = malloc(sizeof(*self));
 
@@ -52,16 +43,6 @@ struct map *map__new(struct list_head *dsos__list, u64 start, u64 len,
 		struct dso *dso;
 		int anon;
 
-		if (cwd) {
-			int n = strcommon(filename, cwd, cwdlen);
-
-			if (n == cwdlen) {
-				snprintf(newfilename, sizeof(newfilename),
-					 ".%s", filename + n);
-				filename = newfilename;
-			}
-		}
-
 		anon = is_anon_memory(filename);
 
 		if (anon) {
@@ -248,6 +229,39 @@ void map_groups__init(struct map_groups *self)
 	self->machine = NULL;
 }
 
+static void maps__delete(struct rb_root *self)
+{
+	struct rb_node *next = rb_first(self);
+
+	while (next) {
+		struct map *pos = rb_entry(next, struct map, rb_node);
+
+		next = rb_next(&pos->rb_node);
+		rb_erase(&pos->rb_node, self);
+		map__delete(pos);
+	}
+}
+
+static void maps__delete_removed(struct list_head *self)
+{
+	struct map *pos, *n;
+
+	list_for_each_entry_safe(pos, n, self, node) {
+		list_del(&pos->node);
+		map__delete(pos);
+	}
+}
+
+void map_groups__exit(struct map_groups *self)
+{
+	int i;
+
+	for (i = 0; i < MAP__NR_TYPES; ++i) {
+		maps__delete(&self->maps[i]);
+		maps__delete_removed(&self->removed_maps[i]);
+	}
+}
+
 void map_groups__flush(struct map_groups *self)
 {
 	int type;
@@ -374,6 +388,7 @@ int map_groups__fixup_overlappings(struct map_groups *self, struct map *map,
 {
 	struct rb_root *root = &self->maps[map->type];
 	struct rb_node *next = rb_first(root);
+	int err = 0;
 
 	while (next) {
 		struct map *pos = rb_entry(next, struct map, rb_node);
@@ -390,20 +405,16 @@ int map_groups__fixup_overlappings(struct map_groups *self, struct map *map,
 
 		rb_erase(&pos->rb_node, root);
 		/*
-		 * We may have references to this map, for instance in some
-		 * hist_entry instances, so just move them to a separate
-		 * list.
-		 */
-		list_add_tail(&pos->node, &self->removed_maps[map->type]);
-		/*
 		 * Now check if we need to create new maps for areas not
 		 * overlapped by the new map:
 		 */
 		if (map->start > pos->start) {
 			struct map *before = map__clone(pos);
 
-			if (before == NULL)
-				return -ENOMEM;
+			if (before == NULL) {
+				err = -ENOMEM;
+				goto move_map;
+			}
 
 			before->end = map->start - 1;
 			map_groups__insert(self, before);
@@ -414,14 +425,27 @@ int map_groups__fixup_overlappings(struct map_groups *self, struct map *map,
 		if (map->end < pos->end) {
 			struct map *after = map__clone(pos);
 
-			if (after == NULL)
-				return -ENOMEM;
+			if (after == NULL) {
+				err = -ENOMEM;
+				goto move_map;
+			}
 
 			after->start = map->end + 1;
 			map_groups__insert(self, after);
 			if (verbose >= 2)
 				map__fprintf(after, fp);
 		}
+move_map:
+		/*
+		 * If we have references, just move them to a separate list.
+		 */
+		if (pos->referenced)
+			list_add_tail(&pos->node, &self->removed_maps[map->type]);
+		else
+			map__delete(pos);
+
+		if (err)
+			return err;
 	}
 
 	return 0;
@@ -493,6 +517,11 @@ void maps__insert(struct rb_root *maps, struct map *map)
 	rb_insert_color(&map->rb_node, maps);
 }
 
+void maps__remove(struct rb_root *self, struct map *map)
+{
+	rb_erase(&map->rb_node, self);
+}
+
 struct map *maps__find(struct rb_root *maps, u64 ip)
 {
 	struct rb_node **p = &maps->rb_node;
@@ -526,6 +555,31 @@ int machine__init(struct machine *self, const char *root_dir, pid_t pid)
 	return self->root_dir == NULL ? -ENOMEM : 0;
 }
 
+static void dsos__delete(struct list_head *self)
+{
+	struct dso *pos, *n;
+
+	list_for_each_entry_safe(pos, n, self, node) {
+		list_del(&pos->node);
+		dso__delete(pos);
+	}
+}
+
+void machine__exit(struct machine *self)
+{
+	map_groups__exit(&self->kmaps);
+	dsos__delete(&self->user_dsos);
+	dsos__delete(&self->kernel_dsos);
+	free(self->root_dir);
+	self->root_dir = NULL;
+}
+
+void machine__delete(struct machine *self)
+{
+	machine__exit(self);
+	free(self);
+}
+
 struct machine *machines__add(struct rb_root *self, pid_t pid,
 			      const char *root_dir)
 {
diff --git a/tools/perf/util/map.h b/tools/perf/util/map.h
index f3913451282..78575796d5f 100644
--- a/tools/perf/util/map.h
+++ b/tools/perf/util/map.h
@@ -29,7 +29,8 @@ struct map {
 	};
 	u64			start;
 	u64			end;
-	enum map_type		type;
+	u8 /* enum map_type */	type;
+	bool			referenced;
 	u32			priv;
 	u64			pgoff;
 
@@ -106,7 +107,7 @@ void map__init(struct map *self, enum map_type type,
 	       u64 start, u64 end, u64 pgoff, struct dso *dso);
 struct map *map__new(struct list_head *dsos__list, u64 start, u64 len,
 		     u64 pgoff, u32 pid, char *filename,
-		     enum map_type type, char *cwd, int cwdlen);
+		     enum map_type type);
 void map__delete(struct map *self);
 struct map *map__clone(struct map *self);
 int map__overlap(struct map *l, struct map *r);
@@ -125,8 +126,10 @@ void map__reloc_vmlinux(struct map *self);
 size_t __map_groups__fprintf_maps(struct map_groups *self,
 				  enum map_type type, int verbose, FILE *fp);
 void maps__insert(struct rb_root *maps, struct map *map);
+void maps__remove(struct rb_root *self, struct map *map);
 struct map *maps__find(struct rb_root *maps, u64 addr);
 void map_groups__init(struct map_groups *self);
+void map_groups__exit(struct map_groups *self);
 int map_groups__clone(struct map_groups *self,
 		      struct map_groups *parent, enum map_type type);
 size_t map_groups__fprintf(struct map_groups *self, int verbose, FILE *fp);
@@ -142,6 +145,8 @@ struct machine *machines__find(struct rb_root *self, pid_t pid);
 struct machine *machines__findnew(struct rb_root *self, pid_t pid);
 char *machine__mmap_name(struct machine *self, char *bf, size_t size);
 int machine__init(struct machine *self, const char *root_dir, pid_t pid);
+void machine__exit(struct machine *self);
+void machine__delete(struct machine *self);
 
 /*
  * Default guest kernel is defined by parameter --guestkallsyms
@@ -163,6 +168,11 @@ static inline void map_groups__insert(struct map_groups *self, struct map *map)
 	map->groups = self;
 }
 
+static inline void map_groups__remove(struct map_groups *self, struct map *map)
+{
+	maps__remove(&self->maps[map->type], map);
+}
+
 static inline struct map *map_groups__find(struct map_groups *self,
 					   enum map_type type, u64 addr)
 {
diff --git a/tools/perf/util/newt.c b/tools/perf/util/newt.c
index 7537ca15900..91de99b5844 100644
--- a/tools/perf/util/newt.c
+++ b/tools/perf/util/newt.c
@@ -11,6 +11,7 @@
 #define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
 #endif
 #include <slang.h>
+#include <signal.h>
 #include <stdlib.h>
 #include <newt.h>
 #include <sys/ttydefaults.h>
@@ -278,9 +279,48 @@ struct ui_browser {
 	void		*first_visible_entry, *entries;
 	u16		top, left, width, height;
 	void		*priv;
+	unsigned int	(*refresh_entries)(struct ui_browser *self);
+	void		(*seek)(struct ui_browser *self,
+				off_t offset, int whence);
 	u32		nr_entries;
 };
 
+static void ui_browser__list_head_seek(struct ui_browser *self,
+				       off_t offset, int whence)
+{
+	struct list_head *head = self->entries;
+	struct list_head *pos;
+
+	switch (whence) {
+	case SEEK_SET:
+		pos = head->next;
+		break;
+	case SEEK_CUR:
+		pos = self->first_visible_entry;
+		break;
+	case SEEK_END:
+		pos = head->prev;
+		break;
+	default:
+		return;
+	}
+
+	if (offset > 0) {
+		while (offset-- != 0)
+			pos = pos->next;
+	} else {
+		while (offset++ != 0)
+			pos = pos->prev;
+	}
+
+	self->first_visible_entry = pos;
+}
+
+static bool ui_browser__is_current_entry(struct ui_browser *self, unsigned row)
+{
+	return (self->first_visible_entry_idx + row) == self->index;
+}
+
 static void ui_browser__refresh_dimensions(struct ui_browser *self)
 {
 	int cols, rows;
@@ -297,8 +337,36 @@ static void ui_browser__refresh_dimensions(struct ui_browser *self)
 
 static void ui_browser__reset_index(struct ui_browser *self)
 {
-        self->index = self->first_visible_entry_idx = 0;
-        self->first_visible_entry = NULL;
+	self->index = self->first_visible_entry_idx = 0;
+	self->seek(self, 0, SEEK_SET);
+}
+
+static int ui_browser__show(struct ui_browser *self, const char *title)
+{
+	if (self->form != NULL) {
+		newtFormDestroy(self->form);
+		newtPopWindow();
+	}
+	ui_browser__refresh_dimensions(self);
+	newtCenteredWindow(self->width, self->height, title);
+	self->form = newt_form__new();
+	if (self->form == NULL)
+		return -1;
+
+	self->sb = newtVerticalScrollbar(self->width, 0, self->height,
+					 HE_COLORSET_NORMAL,
+					 HE_COLORSET_SELECTED);
+	if (self->sb == NULL)
+		return -1;
+
+	newtFormAddHotKey(self->form, NEWT_KEY_UP);
+	newtFormAddHotKey(self->form, NEWT_KEY_DOWN);
+	newtFormAddHotKey(self->form, NEWT_KEY_PGUP);
+	newtFormAddHotKey(self->form, NEWT_KEY_PGDN);
+	newtFormAddHotKey(self->form, NEWT_KEY_HOME);
+	newtFormAddHotKey(self->form, NEWT_KEY_END);
+	newtFormAddComponent(self->form, self->sb);
+	return 0;
 }
 
 static int objdump_line__show(struct objdump_line *self, struct list_head *head,
@@ -352,26 +420,10 @@ static int objdump_line__show(struct objdump_line *self, struct list_head *head,
 
 static int ui_browser__refresh_entries(struct ui_browser *self)
 {
-	struct objdump_line *pos;
-	struct list_head *head = self->entries;
-	struct hist_entry *he = self->priv;
-	int row = 0;
-	int len = he->ms.sym->end - he->ms.sym->start;
-
-	if (self->first_visible_entry == NULL || self->first_visible_entry == self->entries)
-                self->first_visible_entry = head->next;
-
-	pos = list_entry(self->first_visible_entry, struct objdump_line, node);
-
-	list_for_each_entry_from(pos, head, node) {
-		bool current_entry = (self->first_visible_entry_idx + row) == self->index;
-		SLsmg_gotorc(self->top + row, self->left);
-		objdump_line__show(pos, head, self->width,
-				   he, len, current_entry);
-		if (++row == self->height)
-			break;
-	}
+	int row;
 
+	newtScrollbarSet(self->sb, self->index, self->nr_entries - 1);
+	row = self->refresh_entries(self);
 	SLsmg_set_color(HE_COLORSET_NORMAL);
 	SLsmg_fill_region(self->top + row, self->left,
 			  self->height - row, self->width, ' ');
@@ -379,42 +431,13 @@ static int ui_browser__refresh_entries(struct ui_browser *self)
 	return 0;
 }
 
-static int ui_browser__run(struct ui_browser *self, const char *title,
-			   struct newtExitStruct *es)
+static int ui_browser__run(struct ui_browser *self, struct newtExitStruct *es)
 {
-	if (self->form) {
-		newtFormDestroy(self->form);
-		newtPopWindow();
-	}
-
-	ui_browser__refresh_dimensions(self);
-	newtCenteredWindow(self->width + 2, self->height, title);
-	self->form = newt_form__new();
-	if (self->form == NULL)
-		return -1;
-
-	self->sb = newtVerticalScrollbar(self->width + 1, 0, self->height,
-					 HE_COLORSET_NORMAL,
-					 HE_COLORSET_SELECTED);
-	if (self->sb == NULL)
-		return -1;
-
-	newtFormAddHotKey(self->form, NEWT_KEY_UP);
-	newtFormAddHotKey(self->form, NEWT_KEY_DOWN);
-	newtFormAddHotKey(self->form, NEWT_KEY_PGUP);
-	newtFormAddHotKey(self->form, NEWT_KEY_PGDN);
-	newtFormAddHotKey(self->form, ' ');
-	newtFormAddHotKey(self->form, NEWT_KEY_HOME);
-	newtFormAddHotKey(self->form, NEWT_KEY_END);
-	newtFormAddHotKey(self->form, NEWT_KEY_TAB);
-	newtFormAddHotKey(self->form, NEWT_KEY_RIGHT);
-
 	if (ui_browser__refresh_entries(self) < 0)
 		return -1;
-	newtFormAddComponent(self->form, self->sb);
 
 	while (1) {
-		unsigned int offset;
+		off_t offset;
 
 		newtFormRun(self->form, es);
 
@@ -428,9 +451,8 @@ static int ui_browser__run(struct ui_browser *self, const char *title,
 				break;
 			++self->index;
 			if (self->index == self->first_visible_entry_idx + self->height) {
-				struct list_head *pos = self->first_visible_entry;
 				++self->first_visible_entry_idx;
-				self->first_visible_entry = pos->next;
+				self->seek(self, +1, SEEK_CUR);
 			}
 			break;
 		case NEWT_KEY_UP:
@@ -438,9 +460,8 @@ static int ui_browser__run(struct ui_browser *self, const char *title,
 				break;
 			--self->index;
 			if (self->index < self->first_visible_entry_idx) {
-				struct list_head *pos = self->first_visible_entry;
 				--self->first_visible_entry_idx;
-				self->first_visible_entry = pos->prev;
+				self->seek(self, -1, SEEK_CUR);
 			}
 			break;
 		case NEWT_KEY_PGDN:
@@ -453,12 +474,7 @@ static int ui_browser__run(struct ui_browser *self, const char *title,
 				offset = self->nr_entries - 1 - self->index;
 			self->index += offset;
 			self->first_visible_entry_idx += offset;
-
-			while (offset--) {
-				struct list_head *pos = self->first_visible_entry;
-				self->first_visible_entry = pos->next;
-			}
-
+			self->seek(self, +offset, SEEK_CUR);
 			break;
 		case NEWT_KEY_PGUP:
 			if (self->first_visible_entry_idx == 0)
@@ -471,36 +487,22 @@ static int ui_browser__run(struct ui_browser *self, const char *title,
 
 			self->index -= offset;
 			self->first_visible_entry_idx -= offset;
-
-			while (offset--) {
-				struct list_head *pos = self->first_visible_entry;
-				self->first_visible_entry = pos->prev;
-			}
+			self->seek(self, -offset, SEEK_CUR);
 			break;
 		case NEWT_KEY_HOME:
 			ui_browser__reset_index(self);
 			break;
-		case NEWT_KEY_END: {
-			struct list_head *head = self->entries;
+		case NEWT_KEY_END:
 			offset = self->height - 1;
+			if (offset >= self->nr_entries)
+				offset = self->nr_entries - 1;
 
-			if (offset > self->nr_entries)
-				offset = self->nr_entries;
-
-			self->index = self->first_visible_entry_idx = self->nr_entries - 1 - offset;
-			self->first_visible_entry = head->prev;
-			while (offset-- != 0) {
-				struct list_head *pos = self->first_visible_entry;
-				self->first_visible_entry = pos->prev;
-			}
-		}
+			self->index = self->nr_entries - 1;
+			self->first_visible_entry_idx = self->index - offset;
+			self->seek(self, -offset, SEEK_END);
 			break;
-		case NEWT_KEY_RIGHT:
-		case NEWT_KEY_LEFT:
-		case NEWT_KEY_TAB:
-			return es->u.key;
 		default:
-			continue;
+			return es->u.key;
 		}
 		if (ui_browser__refresh_entries(self) < 0)
 			return -1;
@@ -508,38 +510,6 @@ static int ui_browser__run(struct ui_browser *self, const char *title,
 	return 0;
 }
 
-/*
- * When debugging newt problems it was useful to be able to "unroll"
- * the calls to newtCheckBoxTreeAdd{Array,Item}, so that we can generate
- * a source file with the sequence of calls to these methods, to then
- * tweak the arrays to get the intended results, so I'm keeping this code
- * here, may be useful again in the future.
- */
-#undef NEWT_DEBUG
-
-static void newt_checkbox_tree__add(newtComponent tree, const char *str,
-				    void *priv, int *indexes)
-{
-#ifdef NEWT_DEBUG
-	/* Print the newtCheckboxTreeAddArray to tinker with its index arrays */
-	int i = 0, len = 40 - strlen(str);
-
-	fprintf(stderr,
-		"\tnewtCheckboxTreeAddItem(tree, %*.*s\"%s\", (void *)%p, 0, ",
-		len, len, " ", str, priv);
-	while (indexes[i] != NEWT_ARG_LAST) {
-		if (indexes[i] != NEWT_ARG_APPEND)
-			fprintf(stderr, " %d,", indexes[i]);
-		else
-			fprintf(stderr, " %s,", "NEWT_ARG_APPEND");
-		++i;
-	}
-	fprintf(stderr, " %s", " NEWT_ARG_LAST);\n");
-	fflush(stderr);
-#endif
-	newtCheckboxTreeAddArray(tree, str, priv, 0, indexes);
-}
-
 static char *callchain_list__sym_name(struct callchain_list *self,
 				      char *bf, size_t bfsize)
 {
@@ -550,144 +520,29 @@ static char *callchain_list__sym_name(struct callchain_list *self,
 	return bf;
 }
 
-static void __callchain__append_graph_browser(struct callchain_node *self,
-					      newtComponent tree, u64 total,
-					      int *indexes, int depth)
+static unsigned int hist_entry__annotate_browser_refresh(struct ui_browser *self)
 {
-	struct rb_node *node;
-	u64 new_total, remaining;
-	int idx = 0;
-
-	if (callchain_param.mode == CHAIN_GRAPH_REL)
-		new_total = self->children_hit;
-	else
-		new_total = total;
-
-	remaining = new_total;
-	node = rb_first(&self->rb_root);
-	while (node) {
-		struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
-		struct rb_node *next = rb_next(node);
-		u64 cumul = cumul_hits(child);
-		struct callchain_list *chain;
-		int first = true, printed = 0;
-		int chain_idx = -1;
-		remaining -= cumul;
-
-		indexes[depth] = NEWT_ARG_APPEND;
-		indexes[depth + 1] = NEWT_ARG_LAST;
-
-		list_for_each_entry(chain, &child->val, list) {
-			char ipstr[BITS_PER_LONG / 4 + 1],
-			     *alloc_str = NULL;
-			const char *str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
-
-			if (first) {
-				double percent = cumul * 100.0 / new_total;
-
-				first = false;
-				if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
-					str = "Not enough memory!";
-				else
-					str = alloc_str;
-			} else {
-				indexes[depth] = idx;
-				indexes[depth + 1] = NEWT_ARG_APPEND;
-				indexes[depth + 2] = NEWT_ARG_LAST;
-				++chain_idx;
-			}
-			newt_checkbox_tree__add(tree, str, &chain->ms, indexes);
-			free(alloc_str);
-			++printed;
-		}
-
-		indexes[depth] = idx;
-		if (chain_idx != -1)
-			indexes[depth + 1] = chain_idx;
-		if (printed != 0)
-			++idx;
-		__callchain__append_graph_browser(child, tree, new_total, indexes,
-						  depth + (chain_idx != -1 ? 2 : 1));
-		node = next;
-	}
-}
-
-static void callchain__append_graph_browser(struct callchain_node *self,
-					    newtComponent tree, u64 total,
-					    int *indexes, int parent_idx)
-{
-	struct callchain_list *chain;
-	int i = 0;
-
-	indexes[1] = NEWT_ARG_APPEND;
-	indexes[2] = NEWT_ARG_LAST;
-
-	list_for_each_entry(chain, &self->val, list) {
-		char ipstr[BITS_PER_LONG / 4 + 1], *str;
-
-		if (chain->ip >= PERF_CONTEXT_MAX)
-			continue;
-
-		if (!i++ && sort__first_dimension == SORT_SYM)
-			continue;
+	struct objdump_line *pos;
+	struct list_head *head = self->entries;
+	struct hist_entry *he = self->priv;
+	int row = 0;
+	int len = he->ms.sym->end - he->ms.sym->start;
 
-		str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
-		newt_checkbox_tree__add(tree, str, &chain->ms, indexes);
-	}
+	if (self->first_visible_entry == NULL || self->first_visible_entry == self->entries)
+                self->first_visible_entry = head->next;
 
-	indexes[1] = parent_idx;
-	indexes[2] = NEWT_ARG_APPEND;
-	indexes[3] = NEWT_ARG_LAST;
-	__callchain__append_graph_browser(self, tree, total, indexes, 2);
-}
+	pos = list_entry(self->first_visible_entry, struct objdump_line, node);
 
-static void hist_entry__append_callchain_browser(struct hist_entry *self,
-						 newtComponent tree, u64 total, int parent_idx)
-{
-	struct rb_node *rb_node;
-	int indexes[1024] = { [0] = parent_idx, };
-	int idx = 0;
-	struct callchain_node *chain;
-
-	rb_node = rb_first(&self->sorted_chain);
-	while (rb_node) {
-		chain = rb_entry(rb_node, struct callchain_node, rb_node);
-		switch (callchain_param.mode) {
-		case CHAIN_FLAT:
-			break;
-		case CHAIN_GRAPH_ABS: /* falldown */
-		case CHAIN_GRAPH_REL:
-			callchain__append_graph_browser(chain, tree, total, indexes, idx++);
-			break;
-		case CHAIN_NONE:
-		default:
+	list_for_each_entry_from(pos, head, node) {
+		bool current_entry = ui_browser__is_current_entry(self, row);
+		SLsmg_gotorc(self->top + row, self->left);
+		objdump_line__show(pos, head, self->width,
+				   he, len, current_entry);
+		if (++row == self->height)
 			break;
-		}
-		rb_node = rb_next(rb_node);
 	}
-}
-
-static size_t hist_entry__append_browser(struct hist_entry *self,
-					 newtComponent tree, u64 total)
-{
-	char s[256];
-	size_t ret;
-
-	if (symbol_conf.exclude_other && !self->parent)
-		return 0;
 
-	ret = hist_entry__snprintf(self, s, sizeof(s), NULL,
-				   false, 0, false, total);
-	if (symbol_conf.use_callchain) {
-		int indexes[2];
-
-		indexes[0] = NEWT_ARG_APPEND;
-		indexes[1] = NEWT_ARG_LAST;
-		newt_checkbox_tree__add(tree, s, &self->ms, indexes);
-	} else
-		newtListboxAppendEntry(tree, s, &self->ms);
-
-	return ret;
+	return row;
 }
 
 int hist_entry__tui_annotate(struct hist_entry *self)
@@ -712,7 +567,9 @@ int hist_entry__tui_annotate(struct hist_entry *self)
 	ui_helpline__push("Press <- or ESC to exit");
 
 	memset(&browser, 0, sizeof(browser));
-	browser.entries = &head;
+	browser.entries		= &head;
+	browser.refresh_entries = hist_entry__annotate_browser_refresh;
+	browser.seek		= ui_browser__list_head_seek;
 	browser.priv = self;
 	list_for_each_entry(pos, &head, node) {
 		size_t line_len = strlen(pos->line);
@@ -722,7 +579,9 @@ int hist_entry__tui_annotate(struct hist_entry *self)
 	}
 
 	browser.width += 18; /* Percentage */
-	ret = ui_browser__run(&browser, self->ms.sym->name, &es);
+	ui_browser__show(&browser, self->ms.sym->name);
+	newtFormAddHotKey(browser.form, ' ');
+	ret = ui_browser__run(&browser, &es);
 	newtFormDestroy(browser.form);
 	newtPopWindow();
 	list_for_each_entry_safe(pos, n, &head, node) {
@@ -733,157 +592,48 @@ int hist_entry__tui_annotate(struct hist_entry *self)
 	return ret;
 }
 
-static const void *newt__symbol_tree_get_current(newtComponent self)
-{
-	if (symbol_conf.use_callchain)
-		return newtCheckboxTreeGetCurrent(self);
-	return newtListboxGetCurrent(self);
-}
-
-static void hist_browser__selection(newtComponent self, void *data)
-{
-	const struct map_symbol **symbol_ptr = data;
-	*symbol_ptr = newt__symbol_tree_get_current(self);
-}
-
 struct hist_browser {
-	newtComponent		form, tree;
-	const struct map_symbol *selection;
+	struct ui_browser   b;
+	struct hists	    *hists;
+	struct hist_entry   *he_selection;
+	struct map_symbol   *selection;
 };
 
-static struct hist_browser *hist_browser__new(void)
+static void hist_browser__reset(struct hist_browser *self);
+static int hist_browser__run(struct hist_browser *self, const char *title,
+			     struct newtExitStruct *es);
+static unsigned int hist_browser__refresh_entries(struct ui_browser *self);
+static void ui_browser__hists_seek(struct ui_browser *self,
+				   off_t offset, int whence);
+
+static struct hist_browser *hist_browser__new(struct hists *hists)
 {
-	struct hist_browser *self = malloc(sizeof(*self));
+	struct hist_browser *self = zalloc(sizeof(*self));
 
-	if (self != NULL)
-		self->form = NULL;
+	if (self) {
+		self->hists = hists;
+		self->b.refresh_entries = hist_browser__refresh_entries;
+		self->b.seek = ui_browser__hists_seek;
+	}
 
 	return self;
 }
 
 static void hist_browser__delete(struct hist_browser *self)
 {
-	newtFormDestroy(self->form);
+	newtFormDestroy(self->b.form);
 	newtPopWindow();
 	free(self);
 }
 
-static int hist_browser__populate(struct hist_browser *self, struct hists *hists,
-				  const char *title)
-{
-	int max_len = 0, idx, cols, rows;
-	struct ui_progress *progress;
-	struct rb_node *nd;
-	u64 curr_hist = 0;
-	char seq[] = ".", unit;
-	char str[256];
-	unsigned long nr_events = hists->stats.nr_events[PERF_RECORD_SAMPLE];
-
-	if (self->form) {
-		newtFormDestroy(self->form);
-		newtPopWindow();
-	}
-
-	nr_events = convert_unit(nr_events, &unit);
-	snprintf(str, sizeof(str), "Events: %lu%c                            ",
-		 nr_events, unit);
-	newtDrawRootText(0, 0, str);
-
-	newtGetScreenSize(NULL, &rows);
-
-	if (symbol_conf.use_callchain)
-		self->tree = newtCheckboxTreeMulti(0, 0, rows - 5, seq,
-						   NEWT_FLAG_SCROLL);
-	else
-		self->tree = newtListbox(0, 0, rows - 5,
-					(NEWT_FLAG_SCROLL |
-					 NEWT_FLAG_RETURNEXIT));
-
-	newtComponentAddCallback(self->tree, hist_browser__selection,
-				 &self->selection);
-
-	progress = ui_progress__new("Adding entries to the browser...",
-				    hists->nr_entries);
-	if (progress == NULL)
-		return -1;
-
-	idx = 0;
-	for (nd = rb_first(&hists->entries); nd; nd = rb_next(nd)) {
-		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
-		int len;
-
-		if (h->filtered)
-			continue;
-
-		len = hist_entry__append_browser(h, self->tree, hists->stats.total_period);
-		if (len > max_len)
-			max_len = len;
-		if (symbol_conf.use_callchain)
-			hist_entry__append_callchain_browser(h, self->tree,
-							     hists->stats.total_period, idx++);
-		++curr_hist;
-		if (curr_hist % 5)
-			ui_progress__update(progress, curr_hist);
-	}
-
-	ui_progress__delete(progress);
-
-	newtGetScreenSize(&cols, &rows);
-
-	if (max_len > cols)
-		max_len = cols - 3;
-
-	if (!symbol_conf.use_callchain)
-		newtListboxSetWidth(self->tree, max_len);
-
-	newtCenteredWindow(max_len + (symbol_conf.use_callchain ? 5 : 0),
-			   rows - 5, title);
-	self->form = newt_form__new();
-	if (self->form == NULL)
-		return -1;
-
-	newtFormAddHotKey(self->form, 'A');
-	newtFormAddHotKey(self->form, 'a');
-	newtFormAddHotKey(self->form, 'D');
-	newtFormAddHotKey(self->form, 'd');
-	newtFormAddHotKey(self->form, 'T');
-	newtFormAddHotKey(self->form, 't');
-	newtFormAddHotKey(self->form, '?');
-	newtFormAddHotKey(self->form, 'H');
-	newtFormAddHotKey(self->form, 'h');
-	newtFormAddHotKey(self->form, NEWT_KEY_F1);
-	newtFormAddHotKey(self->form, NEWT_KEY_RIGHT);
-	newtFormAddHotKey(self->form, NEWT_KEY_TAB);
-	newtFormAddHotKey(self->form, NEWT_KEY_UNTAB);
-	newtFormAddComponents(self->form, self->tree, NULL);
-	self->selection = newt__symbol_tree_get_current(self->tree);
-
-	return 0;
-}
-
 static struct hist_entry *hist_browser__selected_entry(struct hist_browser *self)
 {
-	int *indexes;
-
-	if (!symbol_conf.use_callchain)
-		goto out;
-
-	indexes = newtCheckboxTreeFindItem(self->tree, (void *)self->selection);
-	if (indexes) {
-		bool is_hist_entry = indexes[1] == NEWT_ARG_LAST;
-		free(indexes);
-		if (is_hist_entry)
-			goto out;
-	}
-	return NULL;
-out:
-	return container_of(self->selection, struct hist_entry, ms);
+	return self->he_selection;
 }
 
 static struct thread *hist_browser__selected_thread(struct hist_browser *self)
 {
-	struct hist_entry *he = hist_browser__selected_entry(self);
-	return he ? he->thread : NULL;
+	return self->he_selection->thread;
 }
 
 static int hist_browser__title(char *bf, size_t size, const char *ev_name,
@@ -905,7 +655,7 @@ static int hist_browser__title(char *bf, size_t size, const char *ev_name,
 
 int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
 {
-	struct hist_browser *browser = hist_browser__new();
+	struct hist_browser *browser = hist_browser__new(self);
 	struct pstack *fstack;
 	const struct thread *thread_filter = NULL;
 	const struct dso *dso_filter = NULL;
@@ -924,8 +674,6 @@ int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
 
 	hist_browser__title(msg, sizeof(msg), ev_name,
 			    dso_filter, thread_filter);
-	if (hist_browser__populate(browser, self, msg) < 0)
-		goto out_free_stack;
 
 	while (1) {
 		const struct thread *thread;
@@ -934,7 +682,8 @@ int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
 		int nr_options = 0, choice = 0, i,
 		    annotate = -2, zoom_dso = -2, zoom_thread = -2;
 
-		newtFormRun(browser->form, &es);
+		if (hist_browser__run(browser, msg, &es))
+			break;
 
 		thread = hist_browser__selected_thread(browser);
 		dso = browser->selection->map ? browser->selection->map->dso : NULL;
@@ -1069,8 +818,7 @@ zoom_out_dso:
 			hists__filter_by_dso(self, dso_filter);
 			hist_browser__title(msg, sizeof(msg), ev_name,
 					    dso_filter, thread_filter);
-			if (hist_browser__populate(browser, self, msg) < 0)
-				goto out;
+			hist_browser__reset(browser);
 		} else if (choice == zoom_thread) {
 zoom_thread:
 			if (thread_filter) {
@@ -1088,8 +836,7 @@ zoom_out_thread:
 			hists__filter_by_thread(self, thread_filter);
 			hist_browser__title(msg, sizeof(msg), ev_name,
 					    dso_filter, thread_filter);
-			if (hist_browser__populate(browser, self, msg) < 0)
-				goto out;
+			hist_browser__reset(browser);
 		}
 	}
 out_free_stack:
@@ -1145,6 +892,13 @@ static struct newtPercentTreeColors {
 	"blue",	     "lightgray",
 };
 
+static void newt_suspend(void *d __used)
+{
+	newtSuspend();
+	raise(SIGTSTP);
+	newtResume();
+}
+
 void setup_browser(void)
 {
 	struct newtPercentTreeColors *c = &defaultPercentTreeColors;
@@ -1158,6 +912,7 @@ void setup_browser(void)
 	use_browser = 1;
 	newtInit();
 	newtCls();
+	newtSetSuspendCallback(newt_suspend, NULL);
 	ui_helpline__puts(" ");
 	sltt_set_color(HE_COLORSET_TOP, NULL, c->topColorFg, c->topColorBg);
 	sltt_set_color(HE_COLORSET_MEDIUM, NULL, c->mediumColorFg, c->mediumColorBg);
@@ -1176,3 +931,638 @@ void exit_browser(bool wait_for_ok)
 		newtFinished();
 	}
 }
+
+static void hist_browser__refresh_dimensions(struct hist_browser *self)
+{
+	/* 3 == +/- toggle symbol before actual hist_entry rendering */
+	self->b.width = 3 + (hists__sort_list_width(self->hists) +
+			     sizeof("[k]"));
+}
+
+static void hist_browser__reset(struct hist_browser *self)
+{
+	self->b.nr_entries = self->hists->nr_entries;
+	hist_browser__refresh_dimensions(self);
+	ui_browser__reset_index(&self->b);
+}
+
+static char tree__folded_sign(bool unfolded)
+{
+	return unfolded ? '-' : '+';
+}
+
+static char map_symbol__folded(const struct map_symbol *self)
+{
+	return self->has_children ? tree__folded_sign(self->unfolded) : ' ';
+}
+
+static char hist_entry__folded(const struct hist_entry *self)
+{
+	return map_symbol__folded(&self->ms);
+}
+
+static char callchain_list__folded(const struct callchain_list *self)
+{
+	return map_symbol__folded(&self->ms);
+}
+
+static bool map_symbol__toggle_fold(struct map_symbol *self)
+{
+	if (!self->has_children)
+		return false;
+
+	self->unfolded = !self->unfolded;
+	return true;
+}
+
+#define LEVEL_OFFSET_STEP 3
+
+static int hist_browser__show_callchain_node_rb_tree(struct hist_browser *self,
+						     struct callchain_node *chain_node,
+						     u64 total, int level,
+						     unsigned short row,
+						     off_t *row_offset,
+						     bool *is_current_entry)
+{
+	struct rb_node *node;
+	int first_row = row, width, offset = level * LEVEL_OFFSET_STEP;
+	u64 new_total, remaining;
+
+	if (callchain_param.mode == CHAIN_GRAPH_REL)
+		new_total = chain_node->children_hit;
+	else
+		new_total = total;
+
+	remaining = new_total;
+	node = rb_first(&chain_node->rb_root);
+	while (node) {
+		struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
+		struct rb_node *next = rb_next(node);
+		u64 cumul = cumul_hits(child);
+		struct callchain_list *chain;
+		char folded_sign = ' ';
+		int first = true;
+		int extra_offset = 0;
+
+		remaining -= cumul;
+
+		list_for_each_entry(chain, &child->val, list) {
+			char ipstr[BITS_PER_LONG / 4 + 1], *alloc_str;
+			const char *str;
+			int color;
+			bool was_first = first;
+
+			if (first) {
+				first = false;
+				chain->ms.has_children = chain->list.next != &child->val ||
+							 rb_first(&child->rb_root) != NULL;
+			} else {
+				extra_offset = LEVEL_OFFSET_STEP;
+				chain->ms.has_children = chain->list.next == &child->val &&
+							 rb_first(&child->rb_root) != NULL;
+			}
+
+			folded_sign = callchain_list__folded(chain);
+			if (*row_offset != 0) {
+				--*row_offset;
+				goto do_next;
+			}
+
+			alloc_str = NULL;
+			str = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+			if (was_first) {
+				double percent = cumul * 100.0 / new_total;
+
+				if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
+					str = "Not enough memory!";
+				else
+					str = alloc_str;
+			}
+
+			color = HE_COLORSET_NORMAL;
+			width = self->b.width - (offset + extra_offset + 2);
+			if (ui_browser__is_current_entry(&self->b, row)) {
+				self->selection = &chain->ms;
+				color = HE_COLORSET_SELECTED;
+				*is_current_entry = true;
+			}
+
+			SLsmg_set_color(color);
+			SLsmg_gotorc(self->b.top + row, self->b.left);
+			slsmg_write_nstring(" ", offset + extra_offset);
+			slsmg_printf("%c ", folded_sign);
+			slsmg_write_nstring(str, width);
+			free(alloc_str);
+
+			if (++row == self->b.height)
+				goto out;
+do_next:
+			if (folded_sign == '+')
+				break;
+		}
+
+		if (folded_sign == '-') {
+			const int new_level = level + (extra_offset ? 2 : 1);
+			row += hist_browser__show_callchain_node_rb_tree(self, child, new_total,
+									 new_level, row, row_offset,
+									 is_current_entry);
+		}
+		if (row == self->b.height)
+			goto out;
+		node = next;
+	}
+out:
+	return row - first_row;
+}
+
+static int hist_browser__show_callchain_node(struct hist_browser *self,
+					     struct callchain_node *node,
+					     int level, unsigned short row,
+					     off_t *row_offset,
+					     bool *is_current_entry)
+{
+	struct callchain_list *chain;
+	int first_row = row,
+	     offset = level * LEVEL_OFFSET_STEP,
+	     width = self->b.width - offset;
+	char folded_sign = ' ';
+
+	list_for_each_entry(chain, &node->val, list) {
+		char ipstr[BITS_PER_LONG / 4 + 1], *s;
+		int color;
+		/*
+		 * FIXME: This should be moved to somewhere else,
+		 * probably when the callchain is created, so as not to
+		 * traverse it all over again
+		 */
+		chain->ms.has_children = rb_first(&node->rb_root) != NULL;
+		folded_sign = callchain_list__folded(chain);
+
+		if (*row_offset != 0) {
+			--*row_offset;
+			continue;
+		}
+
+		color = HE_COLORSET_NORMAL;
+		if (ui_browser__is_current_entry(&self->b, row)) {
+			self->selection = &chain->ms;
+			color = HE_COLORSET_SELECTED;
+			*is_current_entry = true;
+		}
+
+		s = callchain_list__sym_name(chain, ipstr, sizeof(ipstr));
+		SLsmg_gotorc(self->b.top + row, self->b.left);
+		SLsmg_set_color(color);
+		slsmg_write_nstring(" ", offset);
+		slsmg_printf("%c ", folded_sign);
+		slsmg_write_nstring(s, width - 2);
+
+		if (++row == self->b.height)
+			goto out;
+	}
+
+	if (folded_sign == '-')
+		row += hist_browser__show_callchain_node_rb_tree(self, node,
+								 self->hists->stats.total_period,
+								 level + 1, row,
+								 row_offset,
+								 is_current_entry);
+out:
+	return row - first_row;
+}
+
+static int hist_browser__show_callchain(struct hist_browser *self,
+					struct rb_root *chain,
+					int level, unsigned short row,
+					off_t *row_offset,
+					bool *is_current_entry)
+{
+	struct rb_node *nd;
+	int first_row = row;
+
+	for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
+		struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+
+		row += hist_browser__show_callchain_node(self, node, level,
+							 row, row_offset,
+							 is_current_entry);
+		if (row == self->b.height)
+			break;
+	}
+
+	return row - first_row;
+}
+
+static int hist_browser__show_entry(struct hist_browser *self,
+				    struct hist_entry *entry,
+				    unsigned short row)
+{
+	char s[256];
+	double percent;
+	int printed = 0;
+	int color, width = self->b.width;
+	char folded_sign = ' ';
+	bool current_entry = ui_browser__is_current_entry(&self->b, row);
+	off_t row_offset = entry->row_offset;
+
+	if (current_entry) {
+		self->he_selection = entry;
+		self->selection = &entry->ms;
+	}
+
+	if (symbol_conf.use_callchain) {
+		entry->ms.has_children = !RB_EMPTY_ROOT(&entry->sorted_chain);
+		folded_sign = hist_entry__folded(entry);
+	}
+
+	if (row_offset == 0) {
+		hist_entry__snprintf(entry, s, sizeof(s), self->hists, NULL, false,
+				     0, false, self->hists->stats.total_period);
+		percent = (entry->period * 100.0) / self->hists->stats.total_period;
+
+		color = HE_COLORSET_SELECTED;
+		if (!current_entry) {
+			if (percent >= MIN_RED)
+				color = HE_COLORSET_TOP;
+			else if (percent >= MIN_GREEN)
+				color = HE_COLORSET_MEDIUM;
+			else
+				color = HE_COLORSET_NORMAL;
+		}
+
+		SLsmg_set_color(color);
+		SLsmg_gotorc(self->b.top + row, self->b.left);
+		if (symbol_conf.use_callchain) {
+			slsmg_printf("%c ", folded_sign);
+			width -= 2;
+		}
+		slsmg_write_nstring(s, width);
+		++row;
+		++printed;
+	} else
+		--row_offset;
+
+	if (folded_sign == '-' && row != self->b.height) {
+		printed += hist_browser__show_callchain(self, &entry->sorted_chain,
+							1, row, &row_offset,
+							&current_entry);
+		if (current_entry)
+			self->he_selection = entry;
+	}
+
+	return printed;
+}
+
+static unsigned int hist_browser__refresh_entries(struct ui_browser *self)
+{
+	unsigned row = 0;
+	struct rb_node *nd;
+	struct hist_browser *hb = container_of(self, struct hist_browser, b);
+
+	if (self->first_visible_entry == NULL)
+		self->first_visible_entry = rb_first(&hb->hists->entries);
+
+	for (nd = self->first_visible_entry; nd; nd = rb_next(nd)) {
+		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+
+		if (h->filtered)
+			continue;
+
+		row += hist_browser__show_entry(hb, h, row);
+		if (row == self->height)
+			break;
+	}
+
+	return row;
+}
+
+static void callchain_node__init_have_children_rb_tree(struct callchain_node *self)
+{
+	struct rb_node *nd = rb_first(&self->rb_root);
+
+	for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
+		struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
+		struct callchain_list *chain;
+		int first = true;
+
+		list_for_each_entry(chain, &child->val, list) {
+			if (first) {
+				first = false;
+				chain->ms.has_children = chain->list.next != &child->val ||
+							 rb_first(&child->rb_root) != NULL;
+			} else
+				chain->ms.has_children = chain->list.next == &child->val &&
+							 rb_first(&child->rb_root) != NULL;
+		}
+
+		callchain_node__init_have_children_rb_tree(child);
+	}
+}
+
+static void callchain_node__init_have_children(struct callchain_node *self)
+{
+	struct callchain_list *chain;
+
+	list_for_each_entry(chain, &self->val, list)
+		chain->ms.has_children = rb_first(&self->rb_root) != NULL;
+
+	callchain_node__init_have_children_rb_tree(self);
+}
+
+static void callchain__init_have_children(struct rb_root *self)
+{
+	struct rb_node *nd;
+
+	for (nd = rb_first(self); nd; nd = rb_next(nd)) {
+		struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+		callchain_node__init_have_children(node);
+	}
+}
+
+static void hist_entry__init_have_children(struct hist_entry *self)
+{
+	if (!self->init_have_children) {
+		callchain__init_have_children(&self->sorted_chain);
+		self->init_have_children = true;
+	}
+}
+
+static struct rb_node *hists__filter_entries(struct rb_node *nd)
+{
+	while (nd != NULL) {
+		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+		if (!h->filtered)
+			return nd;
+
+		nd = rb_next(nd);
+	}
+
+	return NULL;
+}
+
+static struct rb_node *hists__filter_prev_entries(struct rb_node *nd)
+{
+	while (nd != NULL) {
+		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
+		if (!h->filtered)
+			return nd;
+
+		nd = rb_prev(nd);
+	}
+
+	return NULL;
+}
+
+static void ui_browser__hists_seek(struct ui_browser *self,
+				   off_t offset, int whence)
+{
+	struct hist_entry *h;
+	struct rb_node *nd;
+	bool first = true;
+
+	switch (whence) {
+	case SEEK_SET:
+		nd = hists__filter_entries(rb_first(self->entries));
+		break;
+	case SEEK_CUR:
+		nd = self->first_visible_entry;
+		goto do_offset;
+	case SEEK_END:
+		nd = hists__filter_prev_entries(rb_last(self->entries));
+		first = false;
+		break;
+	default:
+		return;
+	}
+
+	/*
+	 * Moves not relative to the first visible entry invalidates its
+	 * row_offset:
+	 */
+	h = rb_entry(self->first_visible_entry, struct hist_entry, rb_node);
+	h->row_offset = 0;
+
+	/*
+	 * Here we have to check if nd is expanded (+), if it is we can't go
+	 * the next top level hist_entry, instead we must compute an offset of
+	 * what _not_ to show and not change the first visible entry.
+	 *
+	 * This offset increments when we are going from top to bottom and
+	 * decreases when we're going from bottom to top.
+	 *
+	 * As we don't have backpointers to the top level in the callchains
+	 * structure, we need to always print the whole hist_entry callchain,
+	 * skipping the first ones that are before the first visible entry
+	 * and stop when we printed enough lines to fill the screen.
+	 */
+do_offset:
+	if (offset > 0) {
+		do {
+			h = rb_entry(nd, struct hist_entry, rb_node);
+			if (h->ms.unfolded) {
+				u16 remaining = h->nr_rows - h->row_offset;
+				if (offset > remaining) {
+					offset -= remaining;
+					h->row_offset = 0;
+				} else {
+					h->row_offset += offset;
+					offset = 0;
+					self->first_visible_entry = nd;
+					break;
+				}
+			}
+			nd = hists__filter_entries(rb_next(nd));
+			if (nd == NULL)
+				break;
+			--offset;
+			self->first_visible_entry = nd;
+		} while (offset != 0);
+	} else if (offset < 0) {
+		while (1) {
+			h = rb_entry(nd, struct hist_entry, rb_node);
+			if (h->ms.unfolded) {
+				if (first) {
+					if (-offset > h->row_offset) {
+						offset += h->row_offset;
+						h->row_offset = 0;
+					} else {
+						h->row_offset += offset;
+						offset = 0;
+						self->first_visible_entry = nd;
+						break;
+					}
+				} else {
+					if (-offset > h->nr_rows) {
+						offset += h->nr_rows;
+						h->row_offset = 0;
+					} else {
+						h->row_offset = h->nr_rows + offset;
+						offset = 0;
+						self->first_visible_entry = nd;
+						break;
+					}
+				}
+			}
+
+			nd = hists__filter_prev_entries(rb_prev(nd));
+			if (nd == NULL)
+				break;
+			++offset;
+			self->first_visible_entry = nd;
+			if (offset == 0) {
+				/*
+				 * Last unfiltered hist_entry, check if it is
+				 * unfolded, if it is then we should have
+				 * row_offset at its last entry.
+				 */
+				h = rb_entry(nd, struct hist_entry, rb_node);
+				if (h->ms.unfolded)
+					h->row_offset = h->nr_rows;
+				break;
+			}
+			first = false;
+		}
+	} else {
+		self->first_visible_entry = nd;
+		h = rb_entry(nd, struct hist_entry, rb_node);
+		h->row_offset = 0;
+	}
+}
+
+static int callchain_node__count_rows_rb_tree(struct callchain_node *self)
+{
+	int n = 0;
+	struct rb_node *nd;
+
+	for (nd = rb_first(&self->rb_root); nd; nd = rb_next(nd)) {
+		struct callchain_node *child = rb_entry(nd, struct callchain_node, rb_node);
+		struct callchain_list *chain;
+		char folded_sign = ' '; /* No children */
+
+		list_for_each_entry(chain, &child->val, list) {
+			++n;
+			/* We need this because we may not have children */
+			folded_sign = callchain_list__folded(chain);
+			if (folded_sign == '+')
+				break;
+		}
+
+		if (folded_sign == '-') /* Have children and they're unfolded */
+			n += callchain_node__count_rows_rb_tree(child);
+	}
+
+	return n;
+}
+
+static int callchain_node__count_rows(struct callchain_node *node)
+{
+	struct callchain_list *chain;
+	bool unfolded = false;
+	int n = 0;
+
+	list_for_each_entry(chain, &node->val, list) {
+		++n;
+		unfolded = chain->ms.unfolded;
+	}
+
+	if (unfolded)
+		n += callchain_node__count_rows_rb_tree(node);
+
+	return n;
+}
+
+static int callchain__count_rows(struct rb_root *chain)
+{
+	struct rb_node *nd;
+	int n = 0;
+
+	for (nd = rb_first(chain); nd; nd = rb_next(nd)) {
+		struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
+		n += callchain_node__count_rows(node);
+	}
+
+	return n;
+}
+
+static bool hist_browser__toggle_fold(struct hist_browser *self)
+{
+	if (map_symbol__toggle_fold(self->selection)) {
+		struct hist_entry *he = self->he_selection;
+
+		hist_entry__init_have_children(he);
+		self->hists->nr_entries -= he->nr_rows;
+
+		if (he->ms.unfolded)
+			he->nr_rows = callchain__count_rows(&he->sorted_chain);
+		else
+			he->nr_rows = 0;
+		self->hists->nr_entries += he->nr_rows;
+		self->b.nr_entries = self->hists->nr_entries;
+
+		return true;
+	}
+
+	/* If it doesn't have children, no toggling performed */
+	return false;
+}
+
+static int hist_browser__run(struct hist_browser *self, const char *title,
+			     struct newtExitStruct *es)
+{
+	char str[256], unit;
+	unsigned long nr_events = self->hists->stats.nr_events[PERF_RECORD_SAMPLE];
+
+	self->b.entries = &self->hists->entries;
+	self->b.nr_entries = self->hists->nr_entries;
+
+	hist_browser__refresh_dimensions(self);
+
+	nr_events = convert_unit(nr_events, &unit);
+	snprintf(str, sizeof(str), "Events: %lu%c                            ",
+		 nr_events, unit);
+	newtDrawRootText(0, 0, str);
+
+	if (ui_browser__show(&self->b, title) < 0)
+		return -1;
+
+	newtFormAddHotKey(self->b.form, 'A');
+	newtFormAddHotKey(self->b.form, 'a');
+	newtFormAddHotKey(self->b.form, '?');
+	newtFormAddHotKey(self->b.form, 'h');
+	newtFormAddHotKey(self->b.form, 'H');
+	newtFormAddHotKey(self->b.form, 'd');
+
+	newtFormAddHotKey(self->b.form, NEWT_KEY_LEFT);
+	newtFormAddHotKey(self->b.form, NEWT_KEY_RIGHT);
+	newtFormAddHotKey(self->b.form, NEWT_KEY_ENTER);
+
+	while (1) {
+		ui_browser__run(&self->b, es);
+
+		if (es->reason != NEWT_EXIT_HOTKEY)
+			break;
+		switch (es->u.key) {
+		case 'd': { /* Debug */
+			static int seq;
+			struct hist_entry *h = rb_entry(self->b.first_visible_entry,
+							struct hist_entry, rb_node);
+			ui_helpline__pop();
+			ui_helpline__fpush("%d: nr_ent=(%d,%d), height=%d, idx=%d, fve: idx=%d, row_off=%d, nrows=%d",
+					   seq++, self->b.nr_entries,
+					   self->hists->nr_entries,
+					   self->b.height,
+					   self->b.index,
+					   self->b.first_visible_entry_idx,
+					   h->row_offset, h->nr_rows);
+		}
+			continue;
+		case NEWT_KEY_ENTER:
+			if (hist_browser__toggle_fold(self))
+				break;
+			/* fall thru */
+		default:
+			return 0;
+		}
+	}
+	return 0;
+}
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 9bf0f402ca7..4af5bd59cfd 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -602,8 +602,15 @@ parse_breakpoint_event(const char **strp, struct perf_event_attr *attr)
 			return EVT_FAILED;
 	}
 
-	/* We should find a nice way to override the access type */
-	attr->bp_len = HW_BREAKPOINT_LEN_4;
+	/*
+	 * We should find a nice way to override the access length
+	 * Provide some defaults for now
+	 */
+	if (attr->bp_type == HW_BREAKPOINT_X)
+		attr->bp_len = sizeof(long);
+	else
+		attr->bp_len = HW_BREAKPOINT_LEN_4;
+
 	attr->type = PERF_TYPE_BREAKPOINT;
 
 	return EVT_HANDLED;
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 914c67095d9..2e665cb8405 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1,5 +1,5 @@
 /*
- * probe-event.c : perf-probe definition to kprobe_events format converter
+ * probe-event.c : perf-probe definition to probe_events format converter
  *
  * Written by Masami Hiramatsu <mhiramat@redhat.com>
  *
@@ -120,8 +120,11 @@ static int open_vmlinux(void)
 	return open(machine.vmlinux_maps[MAP__FUNCTION]->dso->long_name, O_RDONLY);
 }
 
-/* Convert trace point to probe point with debuginfo */
-static int convert_to_perf_probe_point(struct kprobe_trace_point *tp,
+/*
+ * Convert trace point to probe point with debuginfo
+ * Currently only handles kprobes.
+ */
+static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp,
 				       struct perf_probe_point *pp)
 {
 	struct symbol *sym;
@@ -151,8 +154,8 @@ static int convert_to_perf_probe_point(struct kprobe_trace_point *tp,
 }
 
 /* Try to find perf_probe_event with debuginfo */
-static int try_to_find_kprobe_trace_events(struct perf_probe_event *pev,
-					   struct kprobe_trace_event **tevs,
+static int try_to_find_probe_trace_events(struct perf_probe_event *pev,
+					   struct probe_trace_event **tevs,
 					   int max_tevs)
 {
 	bool need_dwarf = perf_probe_event_need_dwarf(pev);
@@ -169,11 +172,11 @@ static int try_to_find_kprobe_trace_events(struct perf_probe_event *pev,
 	}
 
 	/* Searching trace events corresponding to probe event */
-	ntevs = find_kprobe_trace_events(fd, pev, tevs, max_tevs);
+	ntevs = find_probe_trace_events(fd, pev, tevs, max_tevs);
 	close(fd);
 
 	if (ntevs > 0) {	/* Succeeded to find trace events */
-		pr_debug("find %d kprobe_trace_events.\n", ntevs);
+		pr_debug("find %d probe_trace_events.\n", ntevs);
 		return ntevs;
 	}
 
@@ -195,6 +198,65 @@ static int try_to_find_kprobe_trace_events(struct perf_probe_event *pev,
 	return ntevs;
 }
 
+/*
+ * Find a src file from a DWARF tag path. Prepend optional source path prefix
+ * and chop off leading directories that do not exist. Result is passed back as
+ * a newly allocated path on success.
+ * Return 0 if file was found and readable, -errno otherwise.
+ */
+static int get_real_path(const char *raw_path, const char *comp_dir,
+			 char **new_path)
+{
+	const char *prefix = symbol_conf.source_prefix;
+
+	if (!prefix) {
+		if (raw_path[0] != '/' && comp_dir)
+			/* If not an absolute path, try to use comp_dir */
+			prefix = comp_dir;
+		else {
+			if (access(raw_path, R_OK) == 0) {
+				*new_path = strdup(raw_path);
+				return 0;
+			} else
+				return -errno;
+		}
+	}
+
+	*new_path = malloc((strlen(prefix) + strlen(raw_path) + 2));
+	if (!*new_path)
+		return -ENOMEM;
+
+	for (;;) {
+		sprintf(*new_path, "%s/%s", prefix, raw_path);
+
+		if (access(*new_path, R_OK) == 0)
+			return 0;
+
+		if (!symbol_conf.source_prefix)
+			/* In case of searching comp_dir, don't retry */
+			return -errno;
+
+		switch (errno) {
+		case ENAMETOOLONG:
+		case ENOENT:
+		case EROFS:
+		case EFAULT:
+			raw_path = strchr(++raw_path, '/');
+			if (!raw_path) {
+				free(*new_path);
+				*new_path = NULL;
+				return -ENOENT;
+			}
+			continue;
+
+		default:
+			free(*new_path);
+			*new_path = NULL;
+			return -errno;
+		}
+	}
+}
+
 #define LINEBUF_SIZE 256
 #define NR_ADDITIONAL_LINES 2
 
@@ -244,6 +306,7 @@ int show_line_range(struct line_range *lr)
 	struct line_node *ln;
 	FILE *fp;
 	int fd, ret;
+	char *tmp;
 
 	/* Search a line range */
 	ret = init_vmlinux();
@@ -266,6 +329,15 @@ int show_line_range(struct line_range *lr)
 		return ret;
 	}
 
+	/* Convert source file path */
+	tmp = lr->path;
+	ret = get_real_path(tmp, lr->comp_dir, &lr->path);
+	free(tmp);	/* Free old path */
+	if (ret < 0) {
+		pr_warning("Failed to find source file. (%d)\n", ret);
+		return ret;
+	}
+
 	setup_pager();
 
 	if (lr->function)
@@ -308,8 +380,8 @@ end:
 
 #else	/* !DWARF_SUPPORT */
 
-static int convert_to_perf_probe_point(struct kprobe_trace_point *tp,
-					struct perf_probe_point *pp)
+static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp,
+				       struct perf_probe_point *pp)
 {
 	pp->function = strdup(tp->symbol);
 	if (pp->function == NULL)
@@ -320,8 +392,8 @@ static int convert_to_perf_probe_point(struct kprobe_trace_point *tp,
 	return 0;
 }
 
-static int try_to_find_kprobe_trace_events(struct perf_probe_event *pev,
-				struct kprobe_trace_event **tevs __unused,
+static int try_to_find_probe_trace_events(struct perf_probe_event *pev,
+				struct probe_trace_event **tevs __unused,
 				int max_tevs __unused)
 {
 	if (perf_probe_event_need_dwarf(pev)) {
@@ -557,7 +629,7 @@ static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev)
 /* Parse perf-probe event argument */
 static int parse_perf_probe_arg(char *str, struct perf_probe_arg *arg)
 {
-	char *tmp;
+	char *tmp, *goodname;
 	struct perf_probe_arg_field **fieldp;
 
 	pr_debug("parsing arg: %s into ", str);
@@ -580,7 +652,7 @@ static int parse_perf_probe_arg(char *str, struct perf_probe_arg *arg)
 		pr_debug("type:%s ", arg->type);
 	}
 
-	tmp = strpbrk(str, "-.");
+	tmp = strpbrk(str, "-.[");
 	if (!is_c_varname(str) || !tmp) {
 		/* A variable, register, symbol or special value */
 		arg->var = strdup(str);
@@ -590,10 +662,11 @@ static int parse_perf_probe_arg(char *str, struct perf_probe_arg *arg)
 		return 0;
 	}
 
-	/* Structure fields */
+	/* Structure fields or array element */
 	arg->var = strndup(str, tmp - str);
 	if (arg->var == NULL)
 		return -ENOMEM;
+	goodname = arg->var;
 	pr_debug("%s, ", arg->var);
 	fieldp = &arg->field;
 
@@ -601,22 +674,38 @@ static int parse_perf_probe_arg(char *str, struct perf_probe_arg *arg)
 		*fieldp = zalloc(sizeof(struct perf_probe_arg_field));
 		if (*fieldp == NULL)
 			return -ENOMEM;
-		if (*tmp == '.') {
-			str = tmp + 1;
-			(*fieldp)->ref = false;
-		} else if (tmp[1] == '>') {
-			str = tmp + 2;
+		if (*tmp == '[') {	/* Array */
+			str = tmp;
+			(*fieldp)->index = strtol(str + 1, &tmp, 0);
 			(*fieldp)->ref = true;
-		} else {
-			semantic_error("Argument parse error: %s\n", str);
-			return -EINVAL;
+			if (*tmp != ']' || tmp == str + 1) {
+				semantic_error("Array index must be a"
+						" number.\n");
+				return -EINVAL;
+			}
+			tmp++;
+			if (*tmp == '\0')
+				tmp = NULL;
+		} else {		/* Structure */
+			if (*tmp == '.') {
+				str = tmp + 1;
+				(*fieldp)->ref = false;
+			} else if (tmp[1] == '>') {
+				str = tmp + 2;
+				(*fieldp)->ref = true;
+			} else {
+				semantic_error("Argument parse error: %s\n",
+					       str);
+				return -EINVAL;
+			}
+			tmp = strpbrk(str, "-.[");
 		}
-
-		tmp = strpbrk(str, "-.");
 		if (tmp) {
 			(*fieldp)->name = strndup(str, tmp - str);
 			if ((*fieldp)->name == NULL)
 				return -ENOMEM;
+			if (*str != '[')
+				goodname = (*fieldp)->name;
 			pr_debug("%s(%d), ", (*fieldp)->name, (*fieldp)->ref);
 			fieldp = &(*fieldp)->next;
 		}
@@ -624,11 +713,13 @@ static int parse_perf_probe_arg(char *str, struct perf_probe_arg *arg)
 	(*fieldp)->name = strdup(str);
 	if ((*fieldp)->name == NULL)
 		return -ENOMEM;
+	if (*str != '[')
+		goodname = (*fieldp)->name;
 	pr_debug("%s(%d)\n", (*fieldp)->name, (*fieldp)->ref);
 
-	/* If no name is specified, set the last field name */
+	/* If no name is specified, set the last field name (not array index)*/
 	if (!arg->name) {
-		arg->name = strdup((*fieldp)->name);
+		arg->name = strdup(goodname);
 		if (arg->name == NULL)
 			return -ENOMEM;
 	}
@@ -693,16 +784,17 @@ bool perf_probe_event_need_dwarf(struct perf_probe_event *pev)
 	return false;
 }
 
-/* Parse kprobe_events event into struct probe_point */
-int parse_kprobe_trace_command(const char *cmd, struct kprobe_trace_event *tev)
+/* Parse probe_events event into struct probe_point */
+static int parse_probe_trace_command(const char *cmd,
+					struct probe_trace_event *tev)
 {
-	struct kprobe_trace_point *tp = &tev->point;
+	struct probe_trace_point *tp = &tev->point;
 	char pr;
 	char *p;
 	int ret, i, argc;
 	char **argv;
 
-	pr_debug("Parsing kprobe_events: %s\n", cmd);
+	pr_debug("Parsing probe_events: %s\n", cmd);
 	argv = argv_split(cmd, &argc);
 	if (!argv) {
 		pr_debug("Failed to split arguments.\n");
@@ -734,7 +826,7 @@ int parse_kprobe_trace_command(const char *cmd, struct kprobe_trace_event *tev)
 		tp->offset = 0;
 
 	tev->nargs = argc - 2;
-	tev->args = zalloc(sizeof(struct kprobe_trace_arg) * tev->nargs);
+	tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs);
 	if (tev->args == NULL) {
 		ret = -ENOMEM;
 		goto out;
@@ -776,8 +868,11 @@ int synthesize_perf_probe_arg(struct perf_probe_arg *pa, char *buf, size_t len)
 	len -= ret;
 
 	while (field) {
-		ret = e_snprintf(tmp, len, "%s%s", field->ref ? "->" : ".",
-				 field->name);
+		if (field->name[0] == '[')
+			ret = e_snprintf(tmp, len, "%s", field->name);
+		else
+			ret = e_snprintf(tmp, len, "%s%s",
+					 field->ref ? "->" : ".", field->name);
 		if (ret <= 0)
 			goto error;
 		tmp += ret;
@@ -877,13 +972,13 @@ char *synthesize_perf_probe_command(struct perf_probe_event *pev)
 }
 #endif
 
-static int __synthesize_kprobe_trace_arg_ref(struct kprobe_trace_arg_ref *ref,
+static int __synthesize_probe_trace_arg_ref(struct probe_trace_arg_ref *ref,
 					     char **buf, size_t *buflen,
 					     int depth)
 {
 	int ret;
 	if (ref->next) {
-		depth = __synthesize_kprobe_trace_arg_ref(ref->next, buf,
+		depth = __synthesize_probe_trace_arg_ref(ref->next, buf,
 							 buflen, depth + 1);
 		if (depth < 0)
 			goto out;
@@ -901,9 +996,10 @@ out:
 
 }
 
-static int synthesize_kprobe_trace_arg(struct kprobe_trace_arg *arg,
+static int synthesize_probe_trace_arg(struct probe_trace_arg *arg,
 				       char *buf, size_t buflen)
 {
+	struct probe_trace_arg_ref *ref = arg->ref;
 	int ret, depth = 0;
 	char *tmp = buf;
 
@@ -917,16 +1013,24 @@ static int synthesize_kprobe_trace_arg(struct kprobe_trace_arg *arg,
 	buf += ret;
 	buflen -= ret;
 
+	/* Special case: @XXX */
+	if (arg->value[0] == '@' && arg->ref)
+			ref = ref->next;
+
 	/* Dereferencing arguments */
-	if (arg->ref) {
-		depth = __synthesize_kprobe_trace_arg_ref(arg->ref, &buf,
+	if (ref) {
+		depth = __synthesize_probe_trace_arg_ref(ref, &buf,
 							  &buflen, 1);
 		if (depth < 0)
 			return depth;
 	}
 
 	/* Print argument value */
-	ret = e_snprintf(buf, buflen, "%s", arg->value);
+	if (arg->value[0] == '@' && arg->ref)
+		ret = e_snprintf(buf, buflen, "%s%+ld", arg->value,
+				 arg->ref->offset);
+	else
+		ret = e_snprintf(buf, buflen, "%s", arg->value);
 	if (ret < 0)
 		return ret;
 	buf += ret;
@@ -951,9 +1055,9 @@ static int synthesize_kprobe_trace_arg(struct kprobe_trace_arg *arg,
 	return buf - tmp;
 }
 
-char *synthesize_kprobe_trace_command(struct kprobe_trace_event *tev)
+char *synthesize_probe_trace_command(struct probe_trace_event *tev)
 {
-	struct kprobe_trace_point *tp = &tev->point;
+	struct probe_trace_point *tp = &tev->point;
 	char *buf;
 	int i, len, ret;
 
@@ -969,7 +1073,7 @@ char *synthesize_kprobe_trace_command(struct kprobe_trace_event *tev)
 		goto error;
 
 	for (i = 0; i < tev->nargs; i++) {
-		ret = synthesize_kprobe_trace_arg(&tev->args[i], buf + len,
+		ret = synthesize_probe_trace_arg(&tev->args[i], buf + len,
 						  MAX_CMDLEN - len);
 		if (ret <= 0)
 			goto error;
@@ -982,7 +1086,7 @@ error:
 	return NULL;
 }
 
-int convert_to_perf_probe_event(struct kprobe_trace_event *tev,
+static int convert_to_perf_probe_event(struct probe_trace_event *tev,
 				struct perf_probe_event *pev)
 {
 	char buf[64] = "";
@@ -995,7 +1099,7 @@ int convert_to_perf_probe_event(struct kprobe_trace_event *tev,
 		return -ENOMEM;
 
 	/* Convert trace_point to probe_point */
-	ret = convert_to_perf_probe_point(&tev->point, &pev->point);
+	ret = kprobe_convert_to_perf_probe(&tev->point, &pev->point);
 	if (ret < 0)
 		return ret;
 
@@ -1008,7 +1112,7 @@ int convert_to_perf_probe_event(struct kprobe_trace_event *tev,
 		if (tev->args[i].name)
 			pev->args[i].name = strdup(tev->args[i].name);
 		else {
-			ret = synthesize_kprobe_trace_arg(&tev->args[i],
+			ret = synthesize_probe_trace_arg(&tev->args[i],
 							  buf, 64);
 			pev->args[i].name = strdup(buf);
 		}
@@ -1059,9 +1163,9 @@ void clear_perf_probe_event(struct perf_probe_event *pev)
 	memset(pev, 0, sizeof(*pev));
 }
 
-void clear_kprobe_trace_event(struct kprobe_trace_event *tev)
+static void clear_probe_trace_event(struct probe_trace_event *tev)
 {
-	struct kprobe_trace_arg_ref *ref, *next;
+	struct probe_trace_arg_ref *ref, *next;
 	int i;
 
 	if (tev->event)
@@ -1122,7 +1226,7 @@ static int open_kprobe_events(bool readwrite)
 }
 
 /* Get raw string list of current kprobe_events */
-static struct strlist *get_kprobe_trace_command_rawlist(int fd)
+static struct strlist *get_probe_trace_command_rawlist(int fd)
 {
 	int ret, idx;
 	FILE *fp;
@@ -1190,7 +1294,7 @@ static int show_perf_probe_event(struct perf_probe_event *pev)
 int show_perf_probe_events(void)
 {
 	int fd, ret;
-	struct kprobe_trace_event tev;
+	struct probe_trace_event tev;
 	struct perf_probe_event pev;
 	struct strlist *rawlist;
 	struct str_node *ent;
@@ -1207,20 +1311,20 @@ int show_perf_probe_events(void)
 	if (fd < 0)
 		return fd;
 
-	rawlist = get_kprobe_trace_command_rawlist(fd);
+	rawlist = get_probe_trace_command_rawlist(fd);
 	close(fd);
 	if (!rawlist)
 		return -ENOENT;
 
 	strlist__for_each(ent, rawlist) {
-		ret = parse_kprobe_trace_command(ent->s, &tev);
+		ret = parse_probe_trace_command(ent->s, &tev);
 		if (ret >= 0) {
 			ret = convert_to_perf_probe_event(&tev, &pev);
 			if (ret >= 0)
 				ret = show_perf_probe_event(&pev);
 		}
 		clear_perf_probe_event(&pev);
-		clear_kprobe_trace_event(&tev);
+		clear_probe_trace_event(&tev);
 		if (ret < 0)
 			break;
 	}
@@ -1230,20 +1334,19 @@ int show_perf_probe_events(void)
 }
 
 /* Get current perf-probe event names */
-static struct strlist *get_kprobe_trace_event_names(int fd, bool include_group)
+static struct strlist *get_probe_trace_event_names(int fd, bool include_group)
 {
 	char buf[128];
 	struct strlist *sl, *rawlist;
 	struct str_node *ent;
-	struct kprobe_trace_event tev;
+	struct probe_trace_event tev;
 	int ret = 0;
 
 	memset(&tev, 0, sizeof(tev));
-
-	rawlist = get_kprobe_trace_command_rawlist(fd);
+	rawlist = get_probe_trace_command_rawlist(fd);
 	sl = strlist__new(true, NULL);
 	strlist__for_each(ent, rawlist) {
-		ret = parse_kprobe_trace_command(ent->s, &tev);
+		ret = parse_probe_trace_command(ent->s, &tev);
 		if (ret < 0)
 			break;
 		if (include_group) {
@@ -1253,7 +1356,7 @@ static struct strlist *get_kprobe_trace_event_names(int fd, bool include_group)
 				ret = strlist__add(sl, buf);
 		} else
 			ret = strlist__add(sl, tev.event);
-		clear_kprobe_trace_event(&tev);
+		clear_probe_trace_event(&tev);
 		if (ret < 0)
 			break;
 	}
@@ -1266,13 +1369,13 @@ static struct strlist *get_kprobe_trace_event_names(int fd, bool include_group)
 	return sl;
 }
 
-static int write_kprobe_trace_event(int fd, struct kprobe_trace_event *tev)
+static int write_probe_trace_event(int fd, struct probe_trace_event *tev)
 {
 	int ret = 0;
-	char *buf = synthesize_kprobe_trace_command(tev);
+	char *buf = synthesize_probe_trace_command(tev);
 
 	if (!buf) {
-		pr_debug("Failed to synthesize kprobe trace event.\n");
+		pr_debug("Failed to synthesize probe trace event.\n");
 		return -EINVAL;
 	}
 
@@ -1325,12 +1428,12 @@ static int get_new_event_name(char *buf, size_t len, const char *base,
 	return ret;
 }
 
-static int __add_kprobe_trace_events(struct perf_probe_event *pev,
-				     struct kprobe_trace_event *tevs,
+static int __add_probe_trace_events(struct perf_probe_event *pev,
+				     struct probe_trace_event *tevs,
 				     int ntevs, bool allow_suffix)
 {
 	int i, fd, ret;
-	struct kprobe_trace_event *tev = NULL;
+	struct probe_trace_event *tev = NULL;
 	char buf[64];
 	const char *event, *group;
 	struct strlist *namelist;
@@ -1339,7 +1442,7 @@ static int __add_kprobe_trace_events(struct perf_probe_event *pev,
 	if (fd < 0)
 		return fd;
 	/* Get current event names */
-	namelist = get_kprobe_trace_event_names(fd, false);
+	namelist = get_probe_trace_event_names(fd, false);
 	if (!namelist) {
 		pr_debug("Failed to get current event list.\n");
 		return -EIO;
@@ -1374,7 +1477,7 @@ static int __add_kprobe_trace_events(struct perf_probe_event *pev,
 			ret = -ENOMEM;
 			break;
 		}
-		ret = write_kprobe_trace_event(fd, tev);
+		ret = write_probe_trace_event(fd, tev);
 		if (ret < 0)
 			break;
 		/* Add added event name to namelist */
@@ -1411,21 +1514,21 @@ static int __add_kprobe_trace_events(struct perf_probe_event *pev,
 	return ret;
 }
 
-static int convert_to_kprobe_trace_events(struct perf_probe_event *pev,
-					  struct kprobe_trace_event **tevs,
+static int convert_to_probe_trace_events(struct perf_probe_event *pev,
+					  struct probe_trace_event **tevs,
 					  int max_tevs)
 {
 	struct symbol *sym;
 	int ret = 0, i;
-	struct kprobe_trace_event *tev;
+	struct probe_trace_event *tev;
 
 	/* Convert perf_probe_event with debuginfo */
-	ret = try_to_find_kprobe_trace_events(pev, tevs, max_tevs);
+	ret = try_to_find_probe_trace_events(pev, tevs, max_tevs);
 	if (ret != 0)
 		return ret;
 
 	/* Allocate trace event buffer */
-	tev = *tevs = zalloc(sizeof(struct kprobe_trace_event));
+	tev = *tevs = zalloc(sizeof(struct probe_trace_event));
 	if (tev == NULL)
 		return -ENOMEM;
 
@@ -1438,7 +1541,7 @@ static int convert_to_kprobe_trace_events(struct perf_probe_event *pev,
 	tev->point.offset = pev->point.offset;
 	tev->nargs = pev->nargs;
 	if (tev->nargs) {
-		tev->args = zalloc(sizeof(struct kprobe_trace_arg)
+		tev->args = zalloc(sizeof(struct probe_trace_arg)
 				   * tev->nargs);
 		if (tev->args == NULL) {
 			ret = -ENOMEM;
@@ -1479,7 +1582,7 @@ static int convert_to_kprobe_trace_events(struct perf_probe_event *pev,
 
 	return 1;
 error:
-	clear_kprobe_trace_event(tev);
+	clear_probe_trace_event(tev);
 	free(tev);
 	*tevs = NULL;
 	return ret;
@@ -1487,7 +1590,7 @@ error:
 
 struct __event_package {
 	struct perf_probe_event		*pev;
-	struct kprobe_trace_event	*tevs;
+	struct probe_trace_event	*tevs;
 	int				ntevs;
 };
 
@@ -1510,7 +1613,7 @@ int add_perf_probe_events(struct perf_probe_event *pevs, int npevs,
 	for (i = 0; i < npevs; i++) {
 		pkgs[i].pev = &pevs[i];
 		/* Convert with or without debuginfo */
-		ret  = convert_to_kprobe_trace_events(pkgs[i].pev,
+		ret  = convert_to_probe_trace_events(pkgs[i].pev,
 						      &pkgs[i].tevs, max_tevs);
 		if (ret < 0)
 			goto end;
@@ -1519,24 +1622,24 @@ int add_perf_probe_events(struct perf_probe_event *pevs, int npevs,
 
 	/* Loop 2: add all events */
 	for (i = 0; i < npevs && ret >= 0; i++)
-		ret = __add_kprobe_trace_events(pkgs[i].pev, pkgs[i].tevs,
+		ret = __add_probe_trace_events(pkgs[i].pev, pkgs[i].tevs,
 						pkgs[i].ntevs, force_add);
 end:
 	/* Loop 3: cleanup trace events  */
 	for (i = 0; i < npevs; i++)
 		for (j = 0; j < pkgs[i].ntevs; j++)
-			clear_kprobe_trace_event(&pkgs[i].tevs[j]);
+			clear_probe_trace_event(&pkgs[i].tevs[j]);
 
 	return ret;
 }
 
-static int __del_trace_kprobe_event(int fd, struct str_node *ent)
+static int __del_trace_probe_event(int fd, struct str_node *ent)
 {
 	char *p;
 	char buf[128];
 	int ret;
 
-	/* Convert from perf-probe event to trace-kprobe event */
+	/* Convert from perf-probe event to trace-probe event */
 	ret = e_snprintf(buf, 128, "-:%s", ent->s);
 	if (ret < 0)
 		goto error;
@@ -1562,7 +1665,7 @@ error:
 	return ret;
 }
 
-static int del_trace_kprobe_event(int fd, const char *group,
+static int del_trace_probe_event(int fd, const char *group,
 				  const char *event, struct strlist *namelist)
 {
 	char buf[128];
@@ -1579,7 +1682,7 @@ static int del_trace_kprobe_event(int fd, const char *group,
 		strlist__for_each_safe(ent, n, namelist)
 			if (strglobmatch(ent->s, buf)) {
 				found++;
-				ret = __del_trace_kprobe_event(fd, ent);
+				ret = __del_trace_probe_event(fd, ent);
 				if (ret < 0)
 					break;
 				strlist__remove(namelist, ent);
@@ -1588,7 +1691,7 @@ static int del_trace_kprobe_event(int fd, const char *group,
 		ent = strlist__find(namelist, buf);
 		if (ent) {
 			found++;
-			ret = __del_trace_kprobe_event(fd, ent);
+			ret = __del_trace_probe_event(fd, ent);
 			if (ret >= 0)
 				strlist__remove(namelist, ent);
 		}
@@ -1612,7 +1715,7 @@ int del_perf_probe_events(struct strlist *dellist)
 		return fd;
 
 	/* Get current event names */
-	namelist = get_kprobe_trace_event_names(fd, true);
+	namelist = get_probe_trace_event_names(fd, true);
 	if (namelist == NULL)
 		return -EINVAL;
 
@@ -1633,7 +1736,7 @@ int del_perf_probe_events(struct strlist *dellist)
 			event = str;
 		}
 		pr_debug("Group: %s, Event: %s\n", group, event);
-		ret = del_trace_kprobe_event(fd, group, event, namelist);
+		ret = del_trace_probe_event(fd, group, event, namelist);
 		free(str);
 		if (ret < 0)
 			break;
diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h
index e9db1a214ca..5af39243a25 100644
--- a/tools/perf/util/probe-event.h
+++ b/tools/perf/util/probe-event.h
@@ -7,33 +7,33 @@
 extern bool probe_event_dry_run;
 
 /* kprobe-tracer tracing point */
-struct kprobe_trace_point {
+struct probe_trace_point {
 	char		*symbol;	/* Base symbol */
 	unsigned long	offset;		/* Offset from symbol */
 	bool		retprobe;	/* Return probe flag */
 };
 
-/* kprobe-tracer tracing argument referencing offset */
-struct kprobe_trace_arg_ref {
-	struct kprobe_trace_arg_ref	*next;	/* Next reference */
+/* probe-tracer tracing argument referencing offset */
+struct probe_trace_arg_ref {
+	struct probe_trace_arg_ref	*next;	/* Next reference */
 	long				offset;	/* Offset value */
 };
 
 /* kprobe-tracer tracing argument */
-struct kprobe_trace_arg {
+struct probe_trace_arg {
 	char				*name;	/* Argument name */
 	char				*value;	/* Base value */
 	char				*type;	/* Type name */
-	struct kprobe_trace_arg_ref	*ref;	/* Referencing offset */
+	struct probe_trace_arg_ref	*ref;	/* Referencing offset */
 };
 
 /* kprobe-tracer tracing event (point + arg) */
-struct kprobe_trace_event {
+struct probe_trace_event {
 	char				*event;	/* Event name */
 	char				*group;	/* Group name */
-	struct kprobe_trace_point	point;	/* Trace point */
+	struct probe_trace_point	point;	/* Trace point */
 	int				nargs;	/* Number of args */
-	struct kprobe_trace_arg		*args;	/* Arguments */
+	struct probe_trace_arg		*args;	/* Arguments */
 };
 
 /* Perf probe probing point */
@@ -50,6 +50,7 @@ struct perf_probe_point {
 struct perf_probe_arg_field {
 	struct perf_probe_arg_field	*next;	/* Next field */
 	char				*name;	/* Name of the field */
+	long				index;	/* Array index number */
 	bool				ref;	/* Referencing flag */
 };
 
@@ -85,31 +86,25 @@ struct line_range {
 	int			end;		/* End line number */
 	int			offset;		/* Start line offset */
 	char			*path;		/* Real path name */
+	char			*comp_dir;	/* Compile directory */
 	struct list_head	line_list;	/* Visible lines */
 };
 
 /* Command string to events */
 extern int parse_perf_probe_command(const char *cmd,
 				    struct perf_probe_event *pev);
-extern int parse_kprobe_trace_command(const char *cmd,
-				      struct kprobe_trace_event *tev);
 
 /* Events to command string */
 extern char *synthesize_perf_probe_command(struct perf_probe_event *pev);
-extern char *synthesize_kprobe_trace_command(struct kprobe_trace_event *tev);
+extern char *synthesize_probe_trace_command(struct probe_trace_event *tev);
 extern int synthesize_perf_probe_arg(struct perf_probe_arg *pa, char *buf,
 				     size_t len);
 
 /* Check the perf_probe_event needs debuginfo */
 extern bool perf_probe_event_need_dwarf(struct perf_probe_event *pev);
 
-/* Convert from kprobe_trace_event to perf_probe_event */
-extern int convert_to_perf_probe_event(struct kprobe_trace_event *tev,
-				       struct perf_probe_event *pev);
-
 /* Release event contents */
 extern void clear_perf_probe_event(struct perf_probe_event *pev);
-extern void clear_kprobe_trace_event(struct kprobe_trace_event *tev);
 
 /* Command string to line-range */
 extern int parse_line_range_desc(const char *cmd, struct line_range *lr);
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index d964cb199c6..840f1aabbb7 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -37,6 +37,7 @@
 #include "event.h"
 #include "debug.h"
 #include "util.h"
+#include "symbol.h"
 #include "probe-finder.h"
 
 /* Kprobe tracer basic type is up to u64 */
@@ -143,12 +144,21 @@ static const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname)
 	return src;
 }
 
+/* Get DW_AT_comp_dir (should be NULL with older gcc) */
+static const char *cu_get_comp_dir(Dwarf_Die *cu_die)
+{
+	Dwarf_Attribute attr;
+	if (dwarf_attr(cu_die, DW_AT_comp_dir, &attr) == NULL)
+		return NULL;
+	return dwarf_formstring(&attr);
+}
+
 /* Compare diename and tname */
 static bool die_compare_name(Dwarf_Die *dw_die, const char *tname)
 {
 	const char *name;
 	name = dwarf_diename(dw_die);
-	return name ? strcmp(tname, name) : -1;
+	return name ? (strcmp(tname, name) == 0) : false;
 }
 
 /* Get type die, but skip qualifiers and typedef */
@@ -319,7 +329,7 @@ static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data)
 	tag = dwarf_tag(die_mem);
 	if ((tag == DW_TAG_formal_parameter ||
 	     tag == DW_TAG_variable) &&
-	    (die_compare_name(die_mem, name) == 0))
+	    die_compare_name(die_mem, name))
 		return DIE_FIND_CB_FOUND;
 
 	return DIE_FIND_CB_CONTINUE;
@@ -338,7 +348,7 @@ static int __die_find_member_cb(Dwarf_Die *die_mem, void *data)
 	const char *name = data;
 
 	if ((dwarf_tag(die_mem) == DW_TAG_member) &&
-	    (die_compare_name(die_mem, name) == 0))
+	    die_compare_name(die_mem, name))
 		return DIE_FIND_CB_FOUND;
 
 	return DIE_FIND_CB_SIBLING;
@@ -356,14 +366,50 @@ static Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name,
  * Probe finder related functions
  */
 
+static struct probe_trace_arg_ref *alloc_trace_arg_ref(long offs)
+{
+	struct probe_trace_arg_ref *ref;
+	ref = zalloc(sizeof(struct probe_trace_arg_ref));
+	if (ref != NULL)
+		ref->offset = offs;
+	return ref;
+}
+
 /* Show a location */
-static int convert_location(Dwarf_Op *op, struct probe_finder *pf)
+static int convert_variable_location(Dwarf_Die *vr_die, struct probe_finder *pf)
 {
+	Dwarf_Attribute attr;
+	Dwarf_Op *op;
+	size_t nops;
 	unsigned int regn;
 	Dwarf_Word offs = 0;
 	bool ref = false;
 	const char *regs;
-	struct kprobe_trace_arg *tvar = pf->tvar;
+	struct probe_trace_arg *tvar = pf->tvar;
+	int ret;
+
+	/* TODO: handle more than 1 exprs */
+	if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL ||
+	    dwarf_getlocation_addr(&attr, pf->addr, &op, &nops, 1) <= 0 ||
+	    nops == 0) {
+		/* TODO: Support const_value */
+		pr_err("Failed to find the location of %s at this address.\n"
+		       " Perhaps, it has been optimized out.\n", pf->pvar->var);
+		return -ENOENT;
+	}
+
+	if (op->atom == DW_OP_addr) {
+		/* Static variables on memory (not stack), make @varname */
+		ret = strlen(dwarf_diename(vr_die));
+		tvar->value = zalloc(ret + 2);
+		if (tvar->value == NULL)
+			return -ENOMEM;
+		snprintf(tvar->value, ret + 2, "@%s", dwarf_diename(vr_die));
+		tvar->ref = alloc_trace_arg_ref((long)offs);
+		if (tvar->ref == NULL)
+			return -ENOMEM;
+		return 0;
+	}
 
 	/* If this is based on frame buffer, set the offset */
 	if (op->atom == DW_OP_fbreg) {
@@ -405,27 +451,72 @@ static int convert_location(Dwarf_Op *op, struct probe_finder *pf)
 		return -ENOMEM;
 
 	if (ref) {
-		tvar->ref = zalloc(sizeof(struct kprobe_trace_arg_ref));
+		tvar->ref = alloc_trace_arg_ref((long)offs);
 		if (tvar->ref == NULL)
 			return -ENOMEM;
-		tvar->ref->offset = (long)offs;
 	}
 	return 0;
 }
 
 static int convert_variable_type(Dwarf_Die *vr_die,
-				 struct kprobe_trace_arg *targ)
+				 struct probe_trace_arg *tvar,
+				 const char *cast)
 {
+	struct probe_trace_arg_ref **ref_ptr = &tvar->ref;
 	Dwarf_Die type;
 	char buf[16];
 	int ret;
 
+	/* TODO: check all types */
+	if (cast && strcmp(cast, "string") != 0) {
+		/* Non string type is OK */
+		tvar->type = strdup(cast);
+		return (tvar->type == NULL) ? -ENOMEM : 0;
+	}
+
 	if (die_get_real_type(vr_die, &type) == NULL) {
 		pr_warning("Failed to get a type information of %s.\n",
 			   dwarf_diename(vr_die));
 		return -ENOENT;
 	}
 
+	pr_debug("%s type is %s.\n",
+		 dwarf_diename(vr_die), dwarf_diename(&type));
+
+	if (cast && strcmp(cast, "string") == 0) {	/* String type */
+		ret = dwarf_tag(&type);
+		if (ret != DW_TAG_pointer_type &&
+		    ret != DW_TAG_array_type) {
+			pr_warning("Failed to cast into string: "
+				   "%s(%s) is not a pointer nor array.",
+				   dwarf_diename(vr_die), dwarf_diename(&type));
+			return -EINVAL;
+		}
+		if (ret == DW_TAG_pointer_type) {
+			if (die_get_real_type(&type, &type) == NULL) {
+				pr_warning("Failed to get a type information.");
+				return -ENOENT;
+			}
+			while (*ref_ptr)
+				ref_ptr = &(*ref_ptr)->next;
+			/* Add new reference with offset +0 */
+			*ref_ptr = zalloc(sizeof(struct probe_trace_arg_ref));
+			if (*ref_ptr == NULL) {
+				pr_warning("Out of memory error\n");
+				return -ENOMEM;
+			}
+		}
+		if (!die_compare_name(&type, "char") &&
+		    !die_compare_name(&type, "unsigned char")) {
+			pr_warning("Failed to cast into string: "
+				   "%s is not (unsigned) char *.",
+				   dwarf_diename(vr_die));
+			return -EINVAL;
+		}
+		tvar->type = strdup(cast);
+		return (tvar->type == NULL) ? -ENOMEM : 0;
+	}
+
 	ret = die_get_byte_size(&type) * 8;
 	if (ret) {
 		/* Check the bitwidth */
@@ -445,8 +536,8 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 				   strerror(-ret));
 			return ret;
 		}
-		targ->type = strdup(buf);
-		if (targ->type == NULL)
+		tvar->type = strdup(buf);
+		if (tvar->type == NULL)
 			return -ENOMEM;
 	}
 	return 0;
@@ -454,22 +545,50 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 
 static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 				    struct perf_probe_arg_field *field,
-				    struct kprobe_trace_arg_ref **ref_ptr,
+				    struct probe_trace_arg_ref **ref_ptr,
 				    Dwarf_Die *die_mem)
 {
-	struct kprobe_trace_arg_ref *ref = *ref_ptr;
+	struct probe_trace_arg_ref *ref = *ref_ptr;
 	Dwarf_Die type;
 	Dwarf_Word offs;
-	int ret;
+	int ret, tag;
 
 	pr_debug("converting %s in %s\n", field->name, varname);
 	if (die_get_real_type(vr_die, &type) == NULL) {
 		pr_warning("Failed to get the type of %s.\n", varname);
 		return -ENOENT;
 	}
-
-	/* Check the pointer and dereference */
-	if (dwarf_tag(&type) == DW_TAG_pointer_type) {
+	pr_debug2("Var real type: (%x)\n", (unsigned)dwarf_dieoffset(&type));
+	tag = dwarf_tag(&type);
+
+	if (field->name[0] == '[' &&
+	    (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type)) {
+		if (field->next)
+			/* Save original type for next field */
+			memcpy(die_mem, &type, sizeof(*die_mem));
+		/* Get the type of this array */
+		if (die_get_real_type(&type, &type) == NULL) {
+			pr_warning("Failed to get the type of %s.\n", varname);
+			return -ENOENT;
+		}
+		pr_debug2("Array real type: (%x)\n",
+			 (unsigned)dwarf_dieoffset(&type));
+		if (tag == DW_TAG_pointer_type) {
+			ref = zalloc(sizeof(struct probe_trace_arg_ref));
+			if (ref == NULL)
+				return -ENOMEM;
+			if (*ref_ptr)
+				(*ref_ptr)->next = ref;
+			else
+				*ref_ptr = ref;
+		}
+		ref->offset += die_get_byte_size(&type) * field->index;
+		if (!field->next)
+			/* Save vr_die for converting types */
+			memcpy(die_mem, vr_die, sizeof(*die_mem));
+		goto next;
+	} else if (tag == DW_TAG_pointer_type) {
+		/* Check the pointer and dereference */
 		if (!field->ref) {
 			pr_err("Semantic error: %s must be referred by '->'\n",
 			       field->name);
@@ -486,7 +605,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 			return -EINVAL;
 		}
 
-		ref = zalloc(sizeof(struct kprobe_trace_arg_ref));
+		ref = zalloc(sizeof(struct probe_trace_arg_ref));
 		if (ref == NULL)
 			return -ENOMEM;
 		if (*ref_ptr)
@@ -495,10 +614,15 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 			*ref_ptr = ref;
 	} else {
 		/* Verify it is a data structure  */
-		if (dwarf_tag(&type) != DW_TAG_structure_type) {
+		if (tag != DW_TAG_structure_type) {
 			pr_warning("%s is not a data structure.\n", varname);
 			return -EINVAL;
 		}
+		if (field->name[0] == '[') {
+			pr_err("Semantic error: %s is not a pointor nor array.",
+			       varname);
+			return -EINVAL;
+		}
 		if (field->ref) {
 			pr_err("Semantic error: %s must be referred by '.'\n",
 			       field->name);
@@ -525,6 +649,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 	}
 	ref->offset += (long)offs;
 
+next:
 	/* Converting next field */
 	if (field->next)
 		return convert_variable_fields(die_mem, field->name,
@@ -536,51 +661,32 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 /* Show a variables in kprobe event format */
 static int convert_variable(Dwarf_Die *vr_die, struct probe_finder *pf)
 {
-	Dwarf_Attribute attr;
 	Dwarf_Die die_mem;
-	Dwarf_Op *expr;
-	size_t nexpr;
 	int ret;
 
-	if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL)
-		goto error;
-	/* TODO: handle more than 1 exprs */
-	ret = dwarf_getlocation_addr(&attr, pf->addr, &expr, &nexpr, 1);
-	if (ret <= 0 || nexpr == 0)
-		goto error;
+	pr_debug("Converting variable %s into trace event.\n",
+		 dwarf_diename(vr_die));
 
-	ret = convert_location(expr, pf);
+	ret = convert_variable_location(vr_die, pf);
 	if (ret == 0 && pf->pvar->field) {
 		ret = convert_variable_fields(vr_die, pf->pvar->var,
 					      pf->pvar->field, &pf->tvar->ref,
 					      &die_mem);
 		vr_die = &die_mem;
 	}
-	if (ret == 0) {
-		if (pf->pvar->type) {
-			pf->tvar->type = strdup(pf->pvar->type);
-			if (pf->tvar->type == NULL)
-				ret = -ENOMEM;
-		} else
-			ret = convert_variable_type(vr_die, pf->tvar);
-	}
+	if (ret == 0)
+		ret = convert_variable_type(vr_die, pf->tvar, pf->pvar->type);
 	/* *expr will be cached in libdw. Don't free it. */
 	return ret;
-error:
-	/* TODO: Support const_value */
-	pr_err("Failed to find the location of %s at this address.\n"
-	       " Perhaps, it has been optimized out.\n", pf->pvar->var);
-	return -ENOENT;
 }
 
 /* Find a variable in a subprogram die */
 static int find_variable(Dwarf_Die *sp_die, struct probe_finder *pf)
 {
-	Dwarf_Die vr_die;
+	Dwarf_Die vr_die, *scopes;
 	char buf[32], *ptr;
-	int ret;
+	int ret, nscopes;
 
-	/* TODO: Support arrays */
 	if (pf->pvar->name)
 		pf->tvar->name = strdup(pf->pvar->name);
 	else {
@@ -607,18 +713,32 @@ static int find_variable(Dwarf_Die *sp_die, struct probe_finder *pf)
 	pr_debug("Searching '%s' variable in context.\n",
 		 pf->pvar->var);
 	/* Search child die for local variables and parameters. */
-	if (!die_find_variable(sp_die, pf->pvar->var, &vr_die)) {
+	if (die_find_variable(sp_die, pf->pvar->var, &vr_die))
+		ret = convert_variable(&vr_die, pf);
+	else {
+		/* Search upper class */
+		nscopes = dwarf_getscopes_die(sp_die, &scopes);
+		if (nscopes > 0) {
+			ret = dwarf_getscopevar(scopes, nscopes, pf->pvar->var,
+						0, NULL, 0, 0, &vr_die);
+			if (ret >= 0)
+				ret = convert_variable(&vr_die, pf);
+			else
+				ret = -ENOENT;
+			free(scopes);
+		} else
+			ret = -ENOENT;
+	}
+	if (ret < 0)
 		pr_warning("Failed to find '%s' in this function.\n",
 			   pf->pvar->var);
-		return -ENOENT;
-	}
-	return convert_variable(&vr_die, pf);
+	return ret;
 }
 
 /* Show a probe point to output buffer */
 static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf)
 {
-	struct kprobe_trace_event *tev;
+	struct probe_trace_event *tev;
 	Dwarf_Addr eaddr;
 	Dwarf_Die die_mem;
 	const char *name;
@@ -683,7 +803,7 @@ static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf)
 
 	/* Find each argument */
 	tev->nargs = pf->pev->nargs;
-	tev->args = zalloc(sizeof(struct kprobe_trace_arg) * tev->nargs);
+	tev->args = zalloc(sizeof(struct probe_trace_arg) * tev->nargs);
 	if (tev->args == NULL)
 		return -ENOMEM;
 	for (i = 0; i < pf->pev->nargs; i++) {
@@ -897,7 +1017,7 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 
 	/* Check tag and diename */
 	if (dwarf_tag(sp_die) != DW_TAG_subprogram ||
-	    die_compare_name(sp_die, pp->function) != 0)
+	    !die_compare_name(sp_die, pp->function))
 		return DWARF_CB_OK;
 
 	pf->fname = dwarf_decl_file(sp_die);
@@ -940,9 +1060,9 @@ static int find_probe_point_by_func(struct probe_finder *pf)
 	return _param.retval;
 }
 
-/* Find kprobe_trace_events specified by perf_probe_event from debuginfo */
-int find_kprobe_trace_events(int fd, struct perf_probe_event *pev,
-			     struct kprobe_trace_event **tevs, int max_tevs)
+/* Find probe_trace_events specified by perf_probe_event from debuginfo */
+int find_probe_trace_events(int fd, struct perf_probe_event *pev,
+			     struct probe_trace_event **tevs, int max_tevs)
 {
 	struct probe_finder pf = {.pev = pev, .max_tevs = max_tevs};
 	struct perf_probe_point *pp = &pev->point;
@@ -952,7 +1072,7 @@ int find_kprobe_trace_events(int fd, struct perf_probe_event *pev,
 	Dwarf *dbg;
 	int ret = 0;
 
-	pf.tevs = zalloc(sizeof(struct kprobe_trace_event) * max_tevs);
+	pf.tevs = zalloc(sizeof(struct probe_trace_event) * max_tevs);
 	if (pf.tevs == NULL)
 		return -ENOMEM;
 	*tevs = pf.tevs;
@@ -1096,7 +1216,7 @@ end:
 static int line_range_add_line(const char *src, unsigned int lineno,
 			       struct line_range *lr)
 {
-	/* Copy real path */
+	/* Copy source path */
 	if (!lr->path) {
 		lr->path = strdup(src);
 		if (lr->path == NULL)
@@ -1220,7 +1340,7 @@ static int line_range_search_cb(Dwarf_Die *sp_die, void *data)
 	struct line_range *lr = lf->lr;
 
 	if (dwarf_tag(sp_die) == DW_TAG_subprogram &&
-	    die_compare_name(sp_die, lr->function) == 0) {
+	    die_compare_name(sp_die, lr->function)) {
 		lf->fname = dwarf_decl_file(sp_die);
 		dwarf_decl_line(sp_die, &lr->offset);
 		pr_debug("fname: %s, lineno:%d\n", lf->fname, lr->offset);
@@ -1263,6 +1383,7 @@ int find_line_range(int fd, struct line_range *lr)
 	size_t cuhl;
 	Dwarf_Die *diep;
 	Dwarf *dbg;
+	const char *comp_dir;
 
 	dbg = dwarf_begin(fd, DWARF_C_READ);
 	if (!dbg) {
@@ -1298,7 +1419,18 @@ int find_line_range(int fd, struct line_range *lr)
 		}
 		off = noff;
 	}
-	pr_debug("path: %lx\n", (unsigned long)lr->path);
+
+	/* Store comp_dir */
+	if (lf.found) {
+		comp_dir = cu_get_comp_dir(&lf.cu_die);
+		if (comp_dir) {
+			lr->comp_dir = strdup(comp_dir);
+			if (!lr->comp_dir)
+				ret = -ENOMEM;
+		}
+	}
+
+	pr_debug("path: %s\n", lr->path);
 	dwarf_end(dbg);
 
 	return (ret < 0) ? ret : lf.found;
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index e1f61dcd18f..4507d519f18 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -16,9 +16,9 @@ static inline int is_c_varname(const char *name)
 }
 
 #ifdef DWARF_SUPPORT
-/* Find kprobe_trace_events specified by perf_probe_event from debuginfo */
-extern int find_kprobe_trace_events(int fd, struct perf_probe_event *pev,
-				    struct kprobe_trace_event **tevs,
+/* Find probe_trace_events specified by perf_probe_event from debuginfo */
+extern int find_probe_trace_events(int fd, struct perf_probe_event *pev,
+				    struct probe_trace_event **tevs,
 				    int max_tevs);
 
 /* Find a perf_probe_point from debuginfo */
@@ -33,7 +33,7 @@ extern int find_line_range(int fd, struct line_range *lr);
 
 struct probe_finder {
 	struct perf_probe_event	*pev;		/* Target probe event */
-	struct kprobe_trace_event *tevs;	/* Result trace events */
+	struct probe_trace_event *tevs;		/* Result trace events */
 	int			ntevs;		/* Number of trace events */
 	int			max_tevs;	/* Max number of trace events */
 
@@ -50,7 +50,7 @@ struct probe_finder {
 #endif
 	Dwarf_Op		*fb_ops;	/* Frame base attribute */
 	struct perf_probe_arg	*pvar;		/* Current target variable */
-	struct kprobe_trace_arg	*tvar;		/* Current result variable */
+	struct probe_trace_arg	*tvar;		/* Current result variable */
 };
 
 struct line_finder {
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index c422cd67631..fa9d652c2dc 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -27,8 +27,10 @@ static int perf_session__open(struct perf_session *self, bool force)
 
 	self->fd = open(self->filename, O_RDONLY);
 	if (self->fd < 0) {
-		pr_err("failed to open file: %s", self->filename);
-		if (!strcmp(self->filename, "perf.data"))
+		int err = errno;
+
+		pr_err("failed to open %s: %s", self->filename, strerror(err));
+		if (err == ENOENT && !strcmp(self->filename, "perf.data"))
 			pr_err("  (try 'perf record' first)");
 		pr_err("\n");
 		return -errno;
@@ -77,6 +79,12 @@ int perf_session__create_kernel_maps(struct perf_session *self)
 	return ret;
 }
 
+static void perf_session__destroy_kernel_maps(struct perf_session *self)
+{
+	machine__destroy_kernel_maps(&self->host_machine);
+	machines__destroy_guest_kernel_maps(&self->machines);
+}
+
 struct perf_session *perf_session__new(const char *filename, int mode, bool force, bool repipe)
 {
 	size_t len = filename ? strlen(filename) + 1 : 0;
@@ -94,8 +102,6 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 	self->hists_tree = RB_ROOT;
 	self->last_match = NULL;
 	self->mmap_window = 32;
-	self->cwd = NULL;
-	self->cwdlen = 0;
 	self->machines = RB_ROOT;
 	self->repipe = repipe;
 	INIT_LIST_HEAD(&self->ordered_samples.samples_head);
@@ -124,16 +130,43 @@ out_delete:
 	return NULL;
 }
 
+static void perf_session__delete_dead_threads(struct perf_session *self)
+{
+	struct thread *n, *t;
+
+	list_for_each_entry_safe(t, n, &self->dead_threads, node) {
+		list_del(&t->node);
+		thread__delete(t);
+	}
+}
+
+static void perf_session__delete_threads(struct perf_session *self)
+{
+	struct rb_node *nd = rb_first(&self->threads);
+
+	while (nd) {
+		struct thread *t = rb_entry(nd, struct thread, rb_node);
+
+		rb_erase(&t->rb_node, &self->threads);
+		nd = rb_next(nd);
+		thread__delete(t);
+	}
+}
+
 void perf_session__delete(struct perf_session *self)
 {
 	perf_header__exit(&self->header);
+	perf_session__destroy_kernel_maps(self);
+	perf_session__delete_dead_threads(self);
+	perf_session__delete_threads(self);
+	machine__exit(&self->host_machine);
 	close(self->fd);
-	free(self->cwd);
 	free(self);
 }
 
 void perf_session__remove_thread(struct perf_session *self, struct thread *th)
 {
+	self->last_match = NULL;
 	rb_erase(&th->rb_node, &self->threads);
 	/*
 	 * We may have references to this thread, for instance in some hist_entry
@@ -830,23 +863,6 @@ int perf_session__process_events(struct perf_session *self,
 	if (perf_session__register_idle_thread(self) == NULL)
 		return -ENOMEM;
 
-	if (!symbol_conf.full_paths) {
-		char bf[PATH_MAX];
-
-		if (getcwd(bf, sizeof(bf)) == NULL) {
-			err = -errno;
-out_getcwd_err:
-			pr_err("failed to get the current directory\n");
-			goto out_err;
-		}
-		self->cwd = strdup(bf);
-		if (self->cwd == NULL) {
-			err = -ENOMEM;
-			goto out_getcwd_err;
-		}
-		self->cwdlen = strlen(self->cwd);
-	}
-
 	if (!self->fd_pipe)
 		err = __perf_session__process_events(self,
 						     self->header.data_offset,
@@ -854,7 +870,7 @@ out_getcwd_err:
 						     self->size, ops);
 	else
 		err = __perf_session__process_pipe_events(self, ops);
-out_err:
+
 	return err;
 }
 
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 2316cb5a411..1c61a4f4aa8 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -1,4 +1,5 @@
 #include "sort.h"
+#include "hist.h"
 
 regex_t		parent_regex;
 const char	default_parent_pattern[] = "^sys_|^do_page_fault";
@@ -10,10 +11,6 @@ int		sort__has_parent = 0;
 
 enum sort_type	sort__first_dimension;
 
-unsigned int dsos__col_width;
-unsigned int comms__col_width;
-unsigned int threads__col_width;
-static unsigned int parent_symbol__col_width;
 char * field_sep;
 
 LIST_HEAD(hist_entry__sort_list);
@@ -28,12 +25,14 @@ static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
 				    size_t size, unsigned int width);
 static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf,
 				       size_t size, unsigned int width);
+static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
+				    size_t size, unsigned int width);
 
 struct sort_entry sort_thread = {
 	.se_header	= "Command:  Pid",
 	.se_cmp		= sort__thread_cmp,
 	.se_snprintf	= hist_entry__thread_snprintf,
-	.se_width	= &threads__col_width,
+	.se_width_idx	= HISTC_THREAD,
 };
 
 struct sort_entry sort_comm = {
@@ -41,27 +40,35 @@ struct sort_entry sort_comm = {
 	.se_cmp		= sort__comm_cmp,
 	.se_collapse	= sort__comm_collapse,
 	.se_snprintf	= hist_entry__comm_snprintf,
-	.se_width	= &comms__col_width,
+	.se_width_idx	= HISTC_COMM,
 };
 
 struct sort_entry sort_dso = {
 	.se_header	= "Shared Object",
 	.se_cmp		= sort__dso_cmp,
 	.se_snprintf	= hist_entry__dso_snprintf,
-	.se_width	= &dsos__col_width,
+	.se_width_idx	= HISTC_DSO,
 };
 
 struct sort_entry sort_sym = {
 	.se_header	= "Symbol",
 	.se_cmp		= sort__sym_cmp,
 	.se_snprintf	= hist_entry__sym_snprintf,
+	.se_width_idx	= HISTC_SYMBOL,
 };
 
 struct sort_entry sort_parent = {
 	.se_header	= "Parent symbol",
 	.se_cmp		= sort__parent_cmp,
 	.se_snprintf	= hist_entry__parent_snprintf,
-	.se_width	= &parent_symbol__col_width,
+	.se_width_idx	= HISTC_PARENT,
+};
+ 
+struct sort_entry sort_cpu = {
+	.se_header      = "CPU",
+	.se_cmp	        = sort__cpu_cmp,
+	.se_snprintf    = hist_entry__cpu_snprintf,
+	.se_width_idx	= HISTC_CPU,
 };
 
 struct sort_dimension {
@@ -76,6 +83,7 @@ static struct sort_dimension sort_dimensions[] = {
 	{ .name = "dso",	.entry = &sort_dso,	},
 	{ .name = "symbol",	.entry = &sort_sym,	},
 	{ .name = "parent",	.entry = &sort_parent,	},
+	{ .name = "cpu",	.entry = &sort_cpu,	},
 };
 
 int64_t cmp_null(void *l, void *r)
@@ -242,6 +250,20 @@ static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf,
 			      self->parent ? self->parent->name : "[other]");
 }
 
+/* --sort cpu */
+
+int64_t
+sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->cpu - left->cpu;
+}
+
+static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
+				       size_t size, unsigned int width)
+{
+	return repsep_snprintf(bf, size, "%-*d", width, self->cpu);
+}
+
 int sort_dimension__add(const char *tok)
 {
 	unsigned int i;
@@ -281,6 +303,8 @@ int sort_dimension__add(const char *tok)
 				sort__first_dimension = SORT_SYM;
 			else if (!strcmp(sd->name, "parent"))
 				sort__first_dimension = SORT_PARENT;
+			else if (!strcmp(sd->name, "cpu"))
+				sort__first_dimension = SORT_CPU;
 		}
 
 		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 0d61c4082f4..46e531d09e8 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -36,11 +36,14 @@ extern struct sort_entry sort_comm;
 extern struct sort_entry sort_dso;
 extern struct sort_entry sort_sym;
 extern struct sort_entry sort_parent;
-extern unsigned int dsos__col_width;
-extern unsigned int comms__col_width;
-extern unsigned int threads__col_width;
 extern enum sort_type sort__first_dimension;
 
+/**
+ * struct hist_entry - histogram entry
+ *
+ * @row_offset - offset from the first callchain expanded to appear on screen
+ * @nr_rows - rows expanded in callchain, recalculated on folding/unfolding
+ */
 struct hist_entry {
 	struct rb_node		rb_node;
 	u64			period;
@@ -51,7 +54,14 @@ struct hist_entry {
 	struct map_symbol	ms;
 	struct thread		*thread;
 	u64			ip;
+	s32			cpu;
 	u32			nr_events;
+
+	/* XXX These two should move to some tree widget lib */
+	u16			row_offset;
+	u16			nr_rows;
+
+	bool			init_have_children;
 	char			level;
 	u8			filtered;
 	struct symbol		*parent;
@@ -68,7 +78,8 @@ enum sort_type {
 	SORT_COMM,
 	SORT_DSO,
 	SORT_SYM,
-	SORT_PARENT
+	SORT_PARENT,
+	SORT_CPU,
 };
 
 /*
@@ -84,7 +95,7 @@ struct sort_entry {
 	int64_t (*se_collapse)(struct hist_entry *, struct hist_entry *);
 	int	(*se_snprintf)(struct hist_entry *self, char *bf, size_t size,
 			       unsigned int width);
-	unsigned int *se_width;
+	u8	se_width_idx;
 	bool	elide;
 };
 
@@ -104,6 +115,7 @@ extern int64_t sort__comm_collapse(struct hist_entry *, struct hist_entry *);
 extern int64_t sort__dso_cmp(struct hist_entry *, struct hist_entry *);
 extern int64_t sort__sym_cmp(struct hist_entry *, struct hist_entry *);
 extern int64_t sort__parent_cmp(struct hist_entry *, struct hist_entry *);
+int64_t sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right);
 extern size_t sort__parent_print(FILE *, struct hist_entry *, unsigned int);
 extern int sort_dimension__add(const char *);
 void sort_entry__setup_elide(struct sort_entry *self, struct strlist *list,
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 5b276833e2b..6f0dd90c36c 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -12,6 +12,7 @@
 #include <fcntl.h>
 #include <unistd.h>
 #include "build-id.h"
+#include "debug.h"
 #include "symbol.h"
 #include "strlist.h"
 
@@ -25,6 +26,8 @@
 #define NT_GNU_BUILD_ID 3
 #endif
 
+static bool dso__build_id_equal(const struct dso *self, u8 *build_id);
+static int elf_read_build_id(Elf *elf, void *bf, size_t size);
 static void dsos__add(struct list_head *head, struct dso *dso);
 static struct map *map__new2(u64 start, struct dso *dso, enum map_type type);
 static int dso__load_kernel_sym(struct dso *self, struct map *map,
@@ -40,6 +43,14 @@ struct symbol_conf symbol_conf = {
 	.try_vmlinux_path = true,
 };
 
+int dso__name_len(const struct dso *self)
+{
+	if (verbose)
+		return self->long_name_len;
+
+	return self->short_name_len;
+}
+
 bool dso__loaded(const struct dso *self, enum map_type type)
 {
 	return self->loaded & (1 << type);
@@ -215,7 +226,9 @@ void dso__delete(struct dso *self)
 	int i;
 	for (i = 0; i < MAP__NR_TYPES; ++i)
 		symbols__delete(&self->symbols[i]);
-	if (self->long_name != self->name)
+	if (self->sname_alloc)
+		free((char *)self->short_name);
+	if (self->lname_alloc)
 		free(self->long_name);
 	free(self);
 }
@@ -933,8 +946,28 @@ static bool elf_sec__is_a(GElf_Shdr *self, Elf_Data *secstrs, enum map_type type
 	}
 }
 
+static size_t elf_addr_to_index(Elf *elf, GElf_Addr addr)
+{
+	Elf_Scn *sec = NULL;
+	GElf_Shdr shdr;
+	size_t cnt = 1;
+
+	while ((sec = elf_nextscn(elf, sec)) != NULL) {
+		gelf_getshdr(sec, &shdr);
+
+		if ((addr >= shdr.sh_addr) &&
+		    (addr < (shdr.sh_addr + shdr.sh_size)))
+			return cnt;
+
+		++cnt;
+	}
+
+	return -1;
+}
+
 static int dso__load_sym(struct dso *self, struct map *map, const char *name,
-			 int fd, symbol_filter_t filter, int kmodule)
+			 int fd, symbol_filter_t filter, int kmodule,
+			 int want_symtab)
 {
 	struct kmap *kmap = self->kernel ? map__kmap(map) : NULL;
 	struct map *curr_map = map;
@@ -944,31 +977,51 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 	int err = -1;
 	uint32_t idx;
 	GElf_Ehdr ehdr;
-	GElf_Shdr shdr;
-	Elf_Data *syms;
+	GElf_Shdr shdr, opdshdr;
+	Elf_Data *syms, *opddata = NULL;
 	GElf_Sym sym;
-	Elf_Scn *sec, *sec_strndx;
+	Elf_Scn *sec, *sec_strndx, *opdsec;
 	Elf *elf;
 	int nr = 0;
+	size_t opdidx = 0;
 
 	elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
 	if (elf == NULL) {
-		pr_err("%s: cannot read %s ELF file.\n", __func__, name);
+		pr_debug("%s: cannot read %s ELF file.\n", __func__, name);
 		goto out_close;
 	}
 
 	if (gelf_getehdr(elf, &ehdr) == NULL) {
-		pr_err("%s: cannot get elf header.\n", __func__);
+		pr_debug("%s: cannot get elf header.\n", __func__);
 		goto out_elf_end;
 	}
 
+	/* Always reject images with a mismatched build-id: */
+	if (self->has_build_id) {
+		u8 build_id[BUILD_ID_SIZE];
+
+		if (elf_read_build_id(elf, build_id,
+				      BUILD_ID_SIZE) != BUILD_ID_SIZE)
+			goto out_elf_end;
+
+		if (!dso__build_id_equal(self, build_id))
+			goto out_elf_end;
+	}
+
 	sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
 	if (sec == NULL) {
+		if (want_symtab)
+			goto out_elf_end;
+
 		sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
 		if (sec == NULL)
 			goto out_elf_end;
 	}
 
+	opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx);
+	if (opdsec)
+		opddata = elf_rawdata(opdsec, NULL);
+
 	syms = elf_getdata(sec, NULL);
 	if (syms == NULL)
 		goto out_elf_end;
@@ -1013,6 +1066,13 @@ static int dso__load_sym(struct dso *self, struct map *map, const char *name,
 		if (!is_label && !elf_sym__is_a(&sym, map->type))
 			continue;
 
+		if (opdsec && sym.st_shndx == opdidx) {
+			u32 offset = sym.st_value - opdshdr.sh_addr;
+			u64 *opd = opddata->d_buf + offset;
+			sym.st_value = *opd;
+			sym.st_shndx = elf_addr_to_index(elf, sym.st_value);
+		}
+
 		sec = elf_getscn(elf, sym.st_shndx);
 		if (!sec)
 			goto out_elf_end;
@@ -1151,37 +1211,26 @@ bool __dsos__read_build_ids(struct list_head *head, bool with_hits)
  */
 #define NOTE_ALIGN(n) (((n) + 3) & -4U)
 
-int filename__read_build_id(const char *filename, void *bf, size_t size)
+static int elf_read_build_id(Elf *elf, void *bf, size_t size)
 {
-	int fd, err = -1;
+	int err = -1;
 	GElf_Ehdr ehdr;
 	GElf_Shdr shdr;
 	Elf_Data *data;
 	Elf_Scn *sec;
 	Elf_Kind ek;
 	void *ptr;
-	Elf *elf;
 
 	if (size < BUILD_ID_SIZE)
 		goto out;
 
-	fd = open(filename, O_RDONLY);
-	if (fd < 0)
-		goto out;
-
-	elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
-	if (elf == NULL) {
-		pr_debug2("%s: cannot read %s ELF file.\n", __func__, filename);
-		goto out_close;
-	}
-
 	ek = elf_kind(elf);
 	if (ek != ELF_K_ELF)
-		goto out_elf_end;
+		goto out;
 
 	if (gelf_getehdr(elf, &ehdr) == NULL) {
 		pr_err("%s: cannot get elf header.\n", __func__);
-		goto out_elf_end;
+		goto out;
 	}
 
 	sec = elf_section_by_name(elf, &ehdr, &shdr,
@@ -1190,12 +1239,12 @@ int filename__read_build_id(const char *filename, void *bf, size_t size)
 		sec = elf_section_by_name(elf, &ehdr, &shdr,
 					  ".notes", NULL);
 		if (sec == NULL)
-			goto out_elf_end;
+			goto out;
 	}
 
 	data = elf_getdata(sec, NULL);
 	if (data == NULL)
-		goto out_elf_end;
+		goto out;
 
 	ptr = data->d_buf;
 	while (ptr < (data->d_buf + data->d_size)) {
@@ -1217,7 +1266,31 @@ int filename__read_build_id(const char *filename, void *bf, size_t size)
 		}
 		ptr += descsz;
 	}
-out_elf_end:
+
+out:
+	return err;
+}
+
+int filename__read_build_id(const char *filename, void *bf, size_t size)
+{
+	int fd, err = -1;
+	Elf *elf;
+
+	if (size < BUILD_ID_SIZE)
+		goto out;
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0)
+		goto out;
+
+	elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
+	if (elf == NULL) {
+		pr_debug2("%s: cannot read %s ELF file.\n", __func__, filename);
+		goto out_close;
+	}
+
+	err = elf_read_build_id(elf, bf, size);
+
 	elf_end(elf);
 out_close:
 	close(fd);
@@ -1293,11 +1366,11 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 {
 	int size = PATH_MAX;
 	char *name;
-	u8 build_id[BUILD_ID_SIZE];
 	int ret = -1;
 	int fd;
 	struct machine *machine;
 	const char *root_dir;
+	int want_symtab;
 
 	dso__set_loaded(self, map->type);
 
@@ -1324,13 +1397,18 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 		return ret;
 	}
 
-	self->origin = DSO__ORIG_BUILD_ID_CACHE;
-	if (dso__build_id_filename(self, name, size) != NULL)
-		goto open_file;
-more:
-	do {
-		self->origin++;
+	/* Iterate over candidate debug images.
+	 * On the first pass, only load images if they have a full symtab.
+	 * Failing that, do a second pass where we accept .dynsym also
+	 */
+	for (self->origin = DSO__ORIG_BUILD_ID_CACHE, want_symtab = 1;
+	     self->origin != DSO__ORIG_NOT_FOUND;
+	     self->origin++) {
 		switch (self->origin) {
+		case DSO__ORIG_BUILD_ID_CACHE:
+			if (dso__build_id_filename(self, name, size) == NULL)
+				continue;
+			break;
 		case DSO__ORIG_FEDORA:
 			snprintf(name, size, "/usr/lib/debug%s.debug",
 				 self->long_name);
@@ -1339,21 +1417,20 @@ more:
 			snprintf(name, size, "/usr/lib/debug%s",
 				 self->long_name);
 			break;
-		case DSO__ORIG_BUILDID:
-			if (filename__read_build_id(self->long_name, build_id,
-						    sizeof(build_id))) {
-				char build_id_hex[BUILD_ID_SIZE * 2 + 1];
-				build_id__sprintf(build_id, sizeof(build_id),
-						  build_id_hex);
-				snprintf(name, size,
-					 "/usr/lib/debug/.build-id/%.2s/%s.debug",
-					build_id_hex, build_id_hex + 2);
-				if (self->has_build_id)
-					goto compare_build_id;
-				break;
+		case DSO__ORIG_BUILDID: {
+			char build_id_hex[BUILD_ID_SIZE * 2 + 1];
+
+			if (!self->has_build_id)
+				continue;
+
+			build_id__sprintf(self->build_id,
+					  sizeof(self->build_id),
+					  build_id_hex);
+			snprintf(name, size,
+				 "/usr/lib/debug/.build-id/%.2s/%s.debug",
+				 build_id_hex, build_id_hex + 2);
 			}
-			self->origin++;
-			/* Fall thru */
+			break;
 		case DSO__ORIG_DSO:
 			snprintf(name, size, "%s", self->long_name);
 			break;
@@ -1366,36 +1443,41 @@ more:
 			break;
 
 		default:
-			goto out;
+			/*
+			 * If we wanted a full symtab but no image had one,
+			 * relax our requirements and repeat the search.
+			 */
+			if (want_symtab) {
+				want_symtab = 0;
+				self->origin = DSO__ORIG_BUILD_ID_CACHE;
+			} else
+				continue;
 		}
 
-		if (self->has_build_id) {
-			if (filename__read_build_id(name, build_id,
-						    sizeof(build_id)) < 0)
-				goto more;
-compare_build_id:
-			if (!dso__build_id_equal(self, build_id))
-				goto more;
-		}
-open_file:
+		/* Name is now the name of the next image to try */
 		fd = open(name, O_RDONLY);
-	} while (fd < 0);
+		if (fd < 0)
+			continue;
 
-	ret = dso__load_sym(self, map, name, fd, filter, 0);
-	close(fd);
+		ret = dso__load_sym(self, map, name, fd, filter, 0,
+				    want_symtab);
+		close(fd);
 
-	/*
-	 * Some people seem to have debuginfo files _WITHOUT_ debug info!?!?
-	 */
-	if (!ret)
-		goto more;
+		/*
+		 * Some people seem to have debuginfo files _WITHOUT_ debug
+		 * info!?!?
+		 */
+		if (!ret)
+			continue;
 
-	if (ret > 0) {
-		int nr_plt = dso__synthesize_plt_symbols(self, map, filter);
-		if (nr_plt > 0)
-			ret += nr_plt;
+		if (ret > 0) {
+			int nr_plt = dso__synthesize_plt_symbols(self, map, filter);
+			if (nr_plt > 0)
+				ret += nr_plt;
+			break;
+		}
 	}
-out:
+
 	free(name);
 	if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
 		return 0;
@@ -1494,6 +1576,7 @@ static int map_groups__set_modules_path_dir(struct map_groups *self,
 				goto out;
 			}
 			dso__set_long_name(map->dso, long_name);
+			map->dso->lname_alloc = 1;
 			dso__kernel_module_get_build_id(map->dso, "");
 		}
 	}
@@ -1656,36 +1739,12 @@ static int dso__load_vmlinux(struct dso *self, struct map *map,
 {
 	int err = -1, fd;
 
-	if (self->has_build_id) {
-		u8 build_id[BUILD_ID_SIZE];
-
-		if (filename__read_build_id(vmlinux, build_id,
-					    sizeof(build_id)) < 0) {
-			pr_debug("No build_id in %s, ignoring it\n", vmlinux);
-			return -1;
-		}
-		if (!dso__build_id_equal(self, build_id)) {
-			char expected_build_id[BUILD_ID_SIZE * 2 + 1],
-			     vmlinux_build_id[BUILD_ID_SIZE * 2 + 1];
-
-			build_id__sprintf(self->build_id,
-					  sizeof(self->build_id),
-					  expected_build_id);
-			build_id__sprintf(build_id, sizeof(build_id),
-					  vmlinux_build_id);
-			pr_debug("build_id in %s is %s while expected is %s, "
-				 "ignoring it\n", vmlinux, vmlinux_build_id,
-				 expected_build_id);
-			return -1;
-		}
-	}
-
 	fd = open(vmlinux, O_RDONLY);
 	if (fd < 0)
 		return -1;
 
 	dso__set_loaded(self, map->type);
-	err = dso__load_sym(self, map, vmlinux, fd, filter, 0);
+	err = dso__load_sym(self, map, vmlinux, fd, filter, 0, 0);
 	close(fd);
 
 	if (err > 0)
@@ -2048,6 +2107,36 @@ int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
 	return 0;
 }
 
+void machine__destroy_kernel_maps(struct machine *self)
+{
+	enum map_type type;
+
+	for (type = 0; type < MAP__NR_TYPES; ++type) {
+		struct kmap *kmap;
+
+		if (self->vmlinux_maps[type] == NULL)
+			continue;
+
+		kmap = map__kmap(self->vmlinux_maps[type]);
+		map_groups__remove(&self->kmaps, self->vmlinux_maps[type]);
+		if (kmap->ref_reloc_sym) {
+			/*
+			 * ref_reloc_sym is shared among all maps, so free just
+			 * on one of them.
+			 */
+			if (type == MAP__FUNCTION) {
+				free((char *)kmap->ref_reloc_sym->name);
+				kmap->ref_reloc_sym->name = NULL;
+				free(kmap->ref_reloc_sym);
+			}
+			kmap->ref_reloc_sym = NULL;
+		}
+
+		map__delete(self->vmlinux_maps[type]);
+		self->vmlinux_maps[type] = NULL;
+	}
+}
+
 int machine__create_kernel_maps(struct machine *self)
 {
 	struct dso *kernel = machine__create_kernel(self);
@@ -2189,6 +2278,15 @@ out_free_comm_list:
 	return -1;
 }
 
+void symbol__exit(void)
+{
+	strlist__delete(symbol_conf.sym_list);
+	strlist__delete(symbol_conf.dso_list);
+	strlist__delete(symbol_conf.comm_list);
+	vmlinux_path__exit();
+	symbol_conf.sym_list = symbol_conf.dso_list = symbol_conf.comm_list = NULL;
+}
+
 int machines__create_kernel_maps(struct rb_root *self, pid_t pid)
 {
 	struct machine *machine = machines__findnew(self, pid);
@@ -2283,6 +2381,19 @@ failure:
 	return ret;
 }
 
+void machines__destroy_guest_kernel_maps(struct rb_root *self)
+{
+	struct rb_node *next = rb_first(self);
+
+	while (next) {
+		struct machine *pos = rb_entry(next, struct machine, rb_node);
+
+		next = rb_next(&pos->rb_node);
+		rb_erase(&pos->rb_node, self);
+		machine__delete(pos);
+	}
+}
+
 int machine__load_kallsyms(struct machine *self, const char *filename,
 			   enum map_type type, symbol_filter_t filter)
 {
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 5e02d2c1715..906be20011d 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -9,8 +9,6 @@
 #include <linux/rbtree.h>
 #include <stdio.h>
 
-#define DEBUG_CACHE_DIR ".debug"
-
 #ifdef HAVE_CPLUS_DEMANGLE
 extern char *cplus_demangle(const char *, int);
 
@@ -70,9 +68,9 @@ struct symbol_conf {
 			show_nr_samples,
 			use_callchain,
 			exclude_other,
-			full_paths,
 			show_cpu_utilization;
 	const char	*vmlinux_name,
+			*source_prefix,
 			*field_sep;
 	const char	*default_guest_vmlinux_name,
 			*default_guest_kallsyms,
@@ -103,6 +101,8 @@ struct ref_reloc_sym {
 struct map_symbol {
 	struct map    *map;
 	struct symbol *sym;
+	bool	      unfolded;
+	bool	      has_children;
 };
 
 struct addr_location {
@@ -112,7 +112,8 @@ struct addr_location {
 	u64	      addr;
 	char	      level;
 	bool	      filtered;
-	unsigned int  cpumode;
+	u8	      cpumode;
+	s32	      cpu;
 };
 
 enum dso_kernel_type {
@@ -125,12 +126,14 @@ struct dso {
 	struct list_head node;
 	struct rb_root	 symbols[MAP__NR_TYPES];
 	struct rb_root	 symbol_names[MAP__NR_TYPES];
+	enum dso_kernel_type	kernel;
 	u8		 adjust_symbols:1;
 	u8		 slen_calculated:1;
 	u8		 has_build_id:1;
-	enum dso_kernel_type	kernel;
 	u8		 hit:1;
 	u8		 annotate_warned:1;
+	u8		 sname_alloc:1;
+	u8		 lname_alloc:1;
 	unsigned char	 origin;
 	u8		 sorted_by_name;
 	u8		 loaded;
@@ -146,6 +149,8 @@ struct dso *dso__new(const char *name);
 struct dso *dso__new_kernel(const char *name);
 void dso__delete(struct dso *self);
 
+int dso__name_len(const struct dso *self);
+
 bool dso__loaded(const struct dso *self, enum map_type type);
 bool dso__sorted_by_name(const struct dso *self, enum map_type type);
 
@@ -207,13 +212,16 @@ int kallsyms__parse(const char *filename, void *arg,
 		    int (*process_symbol)(void *arg, const char *name,
 					  char type, u64 start));
 
+void machine__destroy_kernel_maps(struct machine *self);
 int __machine__create_kernel_maps(struct machine *self, struct dso *kernel);
 int machine__create_kernel_maps(struct machine *self);
 
 int machines__create_kernel_maps(struct rb_root *self, pid_t pid);
 int machines__create_guest_kernel_maps(struct rb_root *self);
+void machines__destroy_guest_kernel_maps(struct rb_root *self);
 
 int symbol__init(void);
+void symbol__exit(void);
 bool symbol_type__is_a(char symbol_type, enum map_type map_type);
 
 size_t machine__fprintf_vmlinux_path(struct machine *self, FILE *fp);
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 9a448b47400..8c72d888e44 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -62,6 +62,13 @@ static struct thread *thread__new(pid_t pid)
 	return self;
 }
 
+void thread__delete(struct thread *self)
+{
+	map_groups__exit(&self->mg);
+	free(self->comm);
+	free(self);
+}
+
 int thread__set_comm(struct thread *self, const char *comm)
 {
 	int err;
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index ee6bbcf277c..688500ff826 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -20,6 +20,8 @@ struct thread {
 
 struct perf_session;
 
+void thread__delete(struct thread *self);
+
 int find_all_tid(int pid, pid_t ** all_tid);
 int thread__set_comm(struct thread *self, const char *comm);
 int thread__comm_len(struct thread *self);
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 4e8b6b0c551..f380fed7435 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -89,6 +89,7 @@
 
 extern const char *graph_line;
 extern const char *graph_dotted_line;
+extern char buildid_dir[];
 
 /* On most systems <limits.h> would have given us this, but
  * not on some systems (e.g. GNU/Hurd).
@@ -152,6 +153,8 @@ extern void warning(const char *err, ...) __attribute__((format (printf, 1, 2)))
 extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN);
 
 extern int prefixcmp(const char *str, const char *prefix);
+extern void set_buildid_dir(void);
+extern void disable_buildid_cache(void);
 
 static inline const char *skip_prefix(const char *str, const char *prefix)
 {